Practical Methods for Including Torsional Anharmonicity in Thermochemical Calculations on Complex Molecules: The Internal-Coordinate Multi-Structural Approximation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zheng, J.; Yu, T.; Papajak, E.

2011-01-01

Many methods for correcting harmonic partition functions for the presence of torsional motions employ some form of one-dimensional torsional treatment to replace the harmonic contribution of a specific normal mode. However, torsions are often strongly coupled to other degrees of freedom, especially other torsions and low-frequency bending motions, and this coupling can make assigning torsions to specific normal modes problematic. Here, we present a new class of methods, called multi-structural (MS) methods, that circumvents the need for such assignments by instead adjusting the harmonic results by torsional correction factors that are determined using internal coordinates. We present three versions ofmore » the MS method: (i) MS-AS based on including all structures (AS), i.e., all conformers generated by internal rotations; (ii) MS-ASCB based on all structures augmented with explicit conformational barrier (CB) information, i.e., including explicit calculations of all barrier heights for internal-rotation barriers between the conformers; and (iii) MS-RS based on including all conformers generated from a reference structure (RS) by independent torsions. In the MS-AS scheme, one has two options for obtaining the local periodicity parameters, one based on consideration of the nearly separable limit and one based on strongly coupled torsions. The latter involves assigning the local periodicities on the basis of Voronoi volumes. The methods are illustrated with calculations for ethanol, 1-butanol, and 1-pentyl radical as well as two one-dimensional torsional potentials. The MS-AS method is particularly interesting because it does not require any information about conformational barriers or about the paths that connect the various structures.« less

Practical methods for including torsional anharmonicity in thermochemical calculations on complex molecules: the internal-coordinate multi-structural approximation.

PubMed

Zheng, Jingjing; Yu, Tao; Papajak, Ewa; Alecu, I M; Mielke, Steven L; Truhlar, Donald G

2011-06-21

Many methods for correcting harmonic partition functions for the presence of torsional motions employ some form of one-dimensional torsional treatment to replace the harmonic contribution of a specific normal mode. However, torsions are often strongly coupled to other degrees of freedom, especially other torsions and low-frequency bending motions, and this coupling can make assigning torsions to specific normal modes problematic. Here, we present a new class of methods, called multi-structural (MS) methods, that circumvents the need for such assignments by instead adjusting the harmonic results by torsional correction factors that are determined using internal coordinates. We present three versions of the MS method: (i) MS-AS based on including all structures (AS), i.e., all conformers generated by internal rotations; (ii) MS-ASCB based on all structures augmented with explicit conformational barrier (CB) information, i.e., including explicit calculations of all barrier heights for internal-rotation barriers between the conformers; and (iii) MS-RS based on including all conformers generated from a reference structure (RS) by independent torsions. In the MS-AS scheme, one has two options for obtaining the local periodicity parameters, one based on consideration of the nearly separable limit and one based on strongly coupled torsions. The latter involves assigning the local periodicities on the basis of Voronoi volumes. The methods are illustrated with calculations for ethanol, 1-butanol, and 1-pentyl radical as well as two one-dimensional torsional potentials. The MS-AS method is particularly interesting because it does not require any information about conformational barriers or about the paths that connect the various structures.

Relevance of Internal Friction and Structural Constraints for the Dynamics of Denatured Bovine Serum Albumin.

PubMed

Ameseder, Felix; Radulescu, Aurel; Holderer, Olaf; Falus, Peter; Richter, Dieter; Stadler, Andreas M

2018-05-17

A general property of disordered proteins is their structural expansion that results in a high molecular flexibility. The structure and dynamics of bovine serum albumin (BSA) denatured by guanidinium hydrochloride (GndCl) were investigated using small-angle neutron scattering (SANS) and neutron spin-echo spectroscopy (NSE). SANS experiments demonstrated the relevance of intrachain interactions for structural expansion. Using NSE experiments, we observed a high internal flexibility of denatured BSA in addition to center-of-mass diffusion detected by dynamic light scattering. Internal motions measured by NSE were described using concepts based on polymer theory. The contribution of residue-solvent friction was accounted for using the Zimm model including internal friction (ZIF). Disulfide bonds forming loops of amino acids of the peptide backbone have a major impact on internal dynamics that can be interpreted with a reduced set of Zimm modes.

Assessment of Teachers' Reactions to a Knowledge- and Skills-Based Pay Structure at an International School

ERIC Educational Resources Information Center

Lowe, Joel Courtney

2013-01-01

This study explores teachers' reactions to a knowledge- and skills-based pay (KSBP) system implemented in a large international school. Such systems are designed to set teacher compensation based on demonstrated professional knowledge and skills as opposed to the traditional scale based on years of experience and degrees attained. This study fills…

Pollen structure visualization using high-resolution laboratory-based hard X-ray tomography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Qiong; Gluch, Jürgen; Krüger, Peter

A laboratory-based X-ray microscope is used to investigate the 3D structure of unstained whole pollen grains. For the first time, high-resolution laboratory-based hard X-ray microscopy is applied to study pollen grains. Based on the efficient acquisition of statistically relevant information-rich images using Zernike phase contrast, both surface- and internal structures of pine pollen - including exine, intine and cellular structures - are clearly visualized. The specific volumes of these structures are calculated from the tomographic data. The systematic three-dimensional study of pollen grains provides morphological and structural information about taxonomic characters that are essential in palynology. Such studies have amore » direct impact on disciplines such as forestry, agriculture, horticulture, plant breeding and biodiversity. - Highlights: • The unstained whole pine pollen was visualized by high-resolution laboratory-based HXRM for the first time. • The comparison study of pollen grains by LM, SEM and high-resolution laboratory-based HXRM. • Phase contrast imaging provides significantly higher contrast of the raw images compared to absorption contrast imaging. • Surface and internal structure of the pine pollen including exine, intine and cellular structures are clearly visualized. • 3D volume data of unstained whole pollen grains are acquired and the specific volumes of the different layer are calculated.« less

G-structures and domain walls in heterotic theories

NASA Astrophysics Data System (ADS)

Lukas, Andre; Matti, Cyril

2011-01-01

We consider heterotic string solutions based on a warped product of a four-dimensional domain wall and a six-dimensional internal manifold, preserving two supercharges. The constraints on the internal manifolds with SU(3) structure are derived. They are found to be generalized half-flat manifolds with a particular pattern of torsion classes and they include half-flat manifolds and Strominger's complex non-Kahler manifolds as special cases. We also verify that previous heterotic compactifications on half-flat mirror manifolds are based on this class of solutions.

Incorporating Library School Interns on Academic Library Subject Teams

ERIC Educational Resources Information Center

Sargent, Aloha R.; Becker, Bernd W.; Klingberg, Susan

2011-01-01

This case study analyzes the use of library school interns on subject-based teams for the social sciences, humanities, and sciences in the San Jose State University Library. Interns worked closely with team librarians on reference, collection development/management, and instruction activities. In a structured focus group, interns reported that the…

The Internal Structure of Positive and Negative Affect: A Confirmatory Factor Analysis of the PANAS

ERIC Educational Resources Information Center

Tuccitto, Daniel E.; Giacobbi, Peter R., Jr.; Leite, Walter L.

2010-01-01

This study tested five confirmatory factor analytic (CFA) models of the Positive Affect Negative Affect Schedule (PANAS) to provide validity evidence based on its internal structure. A sample of 223 club sport athletes indicated their emotions during the past week. Results revealed that an orthogonal two-factor CFA model, specifying error…

Population genetic analysis of Enterocytozoon bieneusi in humans.

PubMed

Li, Wei; Cama, Vitaliano; Feng, Yaoyu; Gilman, Robert H; Bern, Caryn; Zhang, Xichen; Xiao, Lihua

2012-01-01

Genotyping based on sequence analysis of the ribosomal internal transcribed spacer has revealed significant genetic diversity in Enterocytozoonbieneusi. Thus far, the population genetics of E. bieneusi and its significance in the epidemiology of microsporidiosis have not been examined. In this study, a multilocus sequence typing of E. bieneusi in AIDS patients in Lima, Peru was conducted, using 72 specimens previously genotyped as A, D, IV, EbpC, WL11, Peru7, Peru8, Peru10 and Peru11 at the internal transcribed spacer locus. Altogether, 39 multilocus genotypes were identified among the 72 specimens. The observation of strong intragenic linkage disequilibria and limited genetic recombination among markers were indicative of an overall clonal population structure of E. bieneusi. Measures of pair-wise intergenic linkage disequilibria and a standardised index of association (IAS) based on allelic profile data further supported this conclusion. Both sequence-based and allelic profile-based phylogenetic analyses showed the presence of two genetically isolated groups in the study population, one (group 1) containing isolates of the anthroponotic internal transcribed spacer genotype A, and the other (group 2) containing isolates of multiple internal transcribed spacer genotypes (mainly genotypes D and IV) with zoonotic potential. The measurement of linkage disequilibria and recombination indicated group 2 had a clonal population structure, whereas group 1 had an epidemic population structure. The formation of the two sub-populations was confirmed by STRUCTURE and Wright's fixation index (FST) analyses. The data highlight the power of MLST in understanding the epidemiology of E. bieneusi. Published by Elsevier Ltd.

Mapping Optimal Charge Density and Length of ROMP-Based PTDMs for siRNA Internalization.

PubMed

Caffrey, Leah M; deRonde, Brittany M; Minter, Lisa M; Tew, Gregory N

2016-10-10

A fundamental understanding of how polymer structure impacts internalization and delivery of biologically relevant cargoes, particularly small interfering ribonucleic acid (siRNA), is of critical importance to the successful design of improved delivery reagents. Herein we report the use of ring-opening metathesis polymerization (ROMP) methods to synthesize two series of guanidinium-rich protein transduction domain mimics (PTDMs): one based on an imide scaffold that contains one guanidinium moiety per repeat unit, and another based on a diester scaffold that contains two guanidinium moieties per repeat unit. By varying both the degree of polymerization and, in effect, the relative number of cationic charges in each PTDM, the performances of the two ROMP backbones for siRNA internalization were evaluated and compared. Internalization of fluorescently labeled siRNA into Jurkat T cells demonstrated that fluorescein isothiocyanate (FITC)-siRNA internalization had a charge content dependence, with PTDMs containing approximately 40 to 60 cationic charges facilitating the most internalization. Despite this charge content dependence, the imide scaffold yielded much lower viabilities in Jurkat T cells than the corresponding diester PTDMs with similar numbers of cationic charges, suggesting that the diester scaffold is preferred for siRNA internalization and delivery applications. These developments will not only improve our understanding of the structural factors necessary for optimal siRNA internalization, but will also guide the future development of optimized PTDMs for siRNA internalization and delivery.

Minimizing distortion and internal forces in truss structures by simulated annealing

NASA Technical Reports Server (NTRS)

Kincaid, Rex K.; Padula, Sharon L.

1990-01-01

Inaccuracies in the length of members and the diameters of joints of large space structures may produce unacceptable levels of surface distortion and internal forces. Here, two discrete optimization problems are formulated, one to minimize surface distortion (DSQRMS) and the other to minimize internal forces (FSQRMS). Both of these problems are based on the influence matrices generated by a small-deformation linear analysis. Good solutions are obtained for DSQRMS and FSQRMS through the use of a simulated annealing heuristic.

Fluid Analysis and Improved Structure of an ATEG Heat Exchanger Based on Computational Fluid Dynamics

NASA Astrophysics Data System (ADS)

Tang, Z. B.; Deng, Y. D.; Su, C. Q.; Yuan, X. H.

2015-06-01

In this study, a numerical model has been employed to analyze the internal flow field distribution in a heat exchanger applied for an automotive thermoelectric generator based on computational fluid dynamics. The model simulates the influence of factors relevant to the heat exchanger, including the automotive waste heat mass flow velocity, temperature, internal fins, and back pressure. The result is in good agreement with experimental test data. Sensitivity analysis of the inlet parameters shows that increase of the exhaust velocity, compared with the inlet temperature, makes little contribution (0.1 versus 0.19) to the heat transfer but results in a detrimental back pressure increase (0.69 versus 0.21). A configuration equipped with internal fins is proved to offer better thermal performance compared with that without fins. Finally, based on an attempt to improve the internal flow field, a more rational structure is obtained, offering a more homogeneous temperature distribution, higher average heat transfer coefficient, and lower back pressure.

Standard Generalized Markup Language for self-defining structured reports.

PubMed

Kahn, C E

1999-01-01

Structured reporting is the process of using standardized data elements and predetermined data-entry formats to record observations. The Standard Generalized Markup Language (SGML; International Standards Organization (ISO) 8879:1986)--an open, internationally accepted standard for document interchange was used to encode medical observations acquired in an Internet-based structured reporting system. The resulting report is self-documenting: it includes a definition of its allowable data fields and values encoded as a report-specific SGML document type definition (DTD). The data-entry forms, DTD, and report document instances are based on report specifications written in a simple, SGML-based language designed for that purpose. Reporting concepts can be linked with those of external vocabularies such as the Unified Medical Language System (UMLS) Metathesaurus. The use of open standards such as SGML is an important step in the creation of open, universally comprehensible structured reports.

Evaluation of Road Performance Based on International Roughness Index and Falling Weight Deflectometer

NASA Astrophysics Data System (ADS)

Hasanuddin; Setyawan, A.; Yulianto, B.

2018-03-01

Assessment to the performance of road pavement is deemed necessary to improve the management quality of road maintenance and rehabilitation. This research to evaluate the road base on functional and structural and recommendations handling done. Assessing the pavement performance is conducted with functional and structural evaluation. Functional evaluation of pavement is based on the value of IRI (International Roughness Index) which among others is derived from reading NAASRA for analysis and recommended road handling. Meanwhile, structural evaluation of pavement is done by analyzing deflection value based on FWD (Falling Weight Deflectometer) data resulting in SN (Structural Number) value. The analysis will result in SN eff (Structural Number Effective) and SN f (Structural Number Future) value obtained from comparing SN eff to SN f value that leads to SCI (Structural Condition Index) value. SCI value implies the possible recommendation for handling pavement. The study done to Simpang Tuan-Batas Kota Jambi road segment was based on functional analysis. The study indicated that the road segment split into 12 segments in which segment 1, 3, 5, 7, 9, and 11 were of regular maintenance, segment 2, 4, 8, 10, 12 belonged to periodic maintenance, and segment 6 was of rehabilitation. The structural analysis resulted in 8 segments consisting of segment 1 and 2 recommended for regular maintenance, segment 3, 4, 5, and 7 for functional overlay, and 6 and 8 were of structural overlay.

The research rotation: competency-based structured and novel approach to research training of internal medicine residents.

PubMed

Kanna, Balavenkatesh; Deng, Changchun; Erickson, Savil N; Valerio, Jose A; Dimitrov, Vihren; Soni, Anita

2006-10-17

In the United States, the Accreditation Council of graduate medical education (ACGME) requires all accredited Internal medicine residency training programs to facilitate resident scholarly activities. However, clinical experience and medical education still remain the main focus of graduate medical education in many Internal Medicine (IM) residency-training programs. Left to design the structure, process and outcome evaluation of the ACGME research requirement, residency-training programs are faced with numerous barriers. Many residency programs report having been cited by the ACGME residency review committee in IM for lack of scholarly activity by residents. We would like to share our experience at Lincoln Hospital, an affiliate of Weill Medical College Cornell University New York, in designing and implementing a successful structured research curriculum based on ACGME competencies taught during a dedicated "research rotation". Since the inception of the research rotation in 2004, participation of our residents among scholarly activities has substantially increased. Our residents increasingly believe and appreciate that research is an integral component of residency training and essential for practice of medicine. Internal medicine residents' outlook in research can be significantly improved using a research curriculum offered through a structured and dedicated research rotation. This is exemplified by the improvement noted in resident satisfaction, their participation in scholarly activities and resident research outcomes since the inception of the research rotation in our internal medicine training program.

The research rotation: competency-based structured and novel approach to research training of internal medicine residents

PubMed Central

Kanna, Balavenkatesh; Deng, Changchun; Erickson, Savil N; Valerio, Jose A; Dimitrov, Vihren; Soni, Anita

2006-01-01

Background In the United States, the Accreditation Council of graduate medical education (ACGME) requires all accredited Internal medicine residency training programs to facilitate resident scholarly activities. However, clinical experience and medical education still remain the main focus of graduate medical education in many Internal Medicine (IM) residency-training programs. Left to design the structure, process and outcome evaluation of the ACGME research requirement, residency-training programs are faced with numerous barriers. Many residency programs report having been cited by the ACGME residency review committee in IM for lack of scholarly activity by residents. Methods We would like to share our experience at Lincoln Hospital, an affiliate of Weill Medical College Cornell University New York, in designing and implementing a successful structured research curriculum based on ACGME competencies taught during a dedicated "research rotation". Results Since the inception of the research rotation in 2004, participation of our residents among scholarly activities has substantially increased. Our residents increasingly believe and appreciate that research is an integral component of residency training and essential for practice of medicine. Conclusion Internal medicine residents' outlook in research can be significantly improved using a research curriculum offered through a structured and dedicated research rotation. This is exemplified by the improvement noted in resident satisfaction, their participation in scholarly activities and resident research outcomes since the inception of the research rotation in our internal medicine training program. PMID:17044924

Export Odyssey: An Exposition and Analytical Review of Literature Concerning an Undergraduate Student Project in International Marketing on Key Teaching-Learning Dimensions.

ERIC Educational Resources Information Center

Williamson, Nicholas C.

2001-01-01

Describes Export Odyssey (EO), a structured, Internet-intensive, team-based undergraduate student project in international marketing. Presents an analytical review of articles in the literature that relate to three key teaching-learning dimensions of student projects (experiential versus non-experiential active learning, team-based versus…

Measuring body structures and body functions from the International Classification of Functioning, Disability, and Health perspective: considerations for biomedical parameters in spinal cord injury research.

PubMed

Eriks-Hoogland, Inge E; Brinkhof, Martin W G; Al-Khodairy, Abdul; Baumberger, Michael; Brechbühl, Jörg; Curt, Armin; Mäder, Mark; Stucki, Gerold; Post, Marcel W M

2011-11-01

The aims of this study were to provide a selection of biomedical domains based on the comprehensive International Classification of Functioning, Disability, and Health (ICF) core sets for spinal cord injury (SCI) and to present an overview of the corresponding measurement instruments. Based on the Biomedical Domain Set, the SCI literature, the International Spinal Cord Society international data sets, and the Spinal Cord Injury Rehabilitation Evidence project publications were used to derive category specifications for use in SCI research. Expert opinion was used to derive a priority selection. The same sources were used to determine candidate measurement instruments for the specification of body functions and body structures using an example, and guiding principles were applied to select the most appropriate biomedical measurement instrument(s) for use in an SCI research project. Literature searches were performed for 41 second-level ICF body functions categories and for four second-level ICF body structures categories. For some of these categories, only a few candidate measurement instruments were found with limited variation in the type of measurement instruments. An ICF-based measurement set for biomedical aspects of functioning with SCI was established. For some categories of the ICF core sets for SCI, there is a need to develop measurement instruments.

Sparse Representation Based Classification with Structure Preserving Dimension Reduction

DTIC Science & Technology

2014-03-13

dictionary learning [39] used stochastic approximations to update dictionary with a large data set. Laplacian score dictionary ( LSD ) [58], which is based on...vol. 4. 2003. p. 864–7. 47. Shaw B, Jebara T. Structure preserving embedding. In: The 26th annual international conference on machine learning, ICML

Development of explosive welding procedures to fabricate channeled nozzle structures

NASA Technical Reports Server (NTRS)

Pattee, H. E.; Linse, V. D.

1976-01-01

Research was conducted to demonstrate the feasibility of fabricating a large contoured structure with complex internal channeling by explosive welding procedures. Structures or nozzles of this nature for wind tunnel applications were designed. Such nozzles vary widely in their complexity. However, in their simplest form, they consist of a grooved base section to which a cover sheet is attached to form a series of internal cooling passages. The cover sheet attachment can be accomplished in various ways: fusion welding, brazing, and diffusion welding. The cover sheet has also been electroformed in place. Of these fabrication methods, brazing has proved most successful in producing nozzles with complex contoured surfaces and a multiplicity of internal channels.

Microwave based civil structure inspection device

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sohns, C.W.; Bible, D.W.

1994-06-01

A microwave based ``wall probe`` has been developed which is capable of nondestructive evaluation of architectural structures. By using microwaves in the 8 to 12 GHz range this probing instrument can detect subsurface characteristics through concrete, brick, wood or other building materials to depths in excess of 12 inches. The instrument interrogates a structure from a single side by transmitting a microwave signal into the surface at some angle of incidence and receiving the reflected signal some distance away on the same side of the structure. The transmitted signal is partially reflected at each internal boundary of different dielectric constant,more » giving a composite reflection which contains information from each internal layer. The reflected composite signal is compared in phase and amplitude to the transmitted signal and that reading is considered the ``signature`` of the structure under test. Computer algorithms analyze the signature for recognizable features and nonstandard construction.« less

The supramolecular structure of bone: X-ray scattering analysis and lateral structure modeling

PubMed Central

Zhou, Hong-Wen; Burger, Christian; Wang, Hao; Hsiao, Benjamin S.; Chu, Benjamin; Graham, Lila

2016-01-01

The evolution of vertebrates required a key development in supramolecular evolution: internally mineralized collagen fibrils. In bone, collagen molecules and mineral crystals form a nanocomposite material comparable to cast iron in tensile strength, but several times lighter and more flexible. Current understanding of the internal nanoscale structure of collagen fibrils, derived from studies of rat tail tendon (RTT), does not explain how nucleation and growth of mineral crystals can occur inside a collagen fibril. Experimental obstacles encountered in studying bone have prevented a solution to this problem for several decades. This report presents a lateral packing model for collagen molecules in bone fibrils, based on the unprecedented observation of multiple resolved equatorial reflections for bone tissue using synchrotron small-angle X-ray scattering (SAXS; ∼1 nm resolution). The deduced structure for pre-mineralized bone fibrils includes features that are not present in RTT: spatially discrete microfibrils. The data are consistent with bone microfibrils similar to pentagonal Smith microfibrils, but are not consistent with the (nondiscrete) quasi-hexagonal microfibrils reported for RTT. These results indicate that collagen fibrils in bone and tendon differ in their internal structure in a manner that allows bone fibrils, but not tendon fibrils, to internally mineralize. In addition, the unique pattern of collagen cross-link types and quantities in mineralized tissues can be can be accounted for, in structural/functional terms, based on a discrete microfibril model. PMID:27599731

Two-step FEM-based Liver-CT registration: improving internal and external accuracy

NASA Astrophysics Data System (ADS)

Oyarzun Laura, Cristina; Drechsler, Klaus; Wesarg, Stefan

2014-03-01

To know the exact location of the internal structures of the organs, especially the vasculature, is of great importance for the clinicians. This information allows them to know which structures/vessels will be affected by certain therapy and therefore to better treat the patients. However the use of internal structures for registration is often disregarded especially in physical based registration methods. In this paper we propose an algorithm that uses finite element methods to carry out a registration of liver volumes that will not only have accuracy in the boundaries of the organ but also in the interior. Therefore a graph matching algorithm is used to find correspondences between the vessel trees of the two livers to be registered. In addition to this an adaptive volumetric mesh is generated that contains nodes in the locations in which correspondences were found. The displacements derived from those correspondences are the input for the initial deformation of the model. The first deformation brings the internal structures to their final deformed positions and the surfaces close to it. Finally, thin plate splines are used to refine the solution at the boundaries of the organ achieving an improvement in the accuracy of 71%. The algorithm has been evaluated in CT clinical images of the abdomen.

Studies on muon tomography for archaeological internal structures scanning

NASA Astrophysics Data System (ADS)

Gómez, H.; Carloganu, C.; Gibert, D.; Jacquemier, J.; Karyotakis, Y.; Marteau, J.; Niess, V.; Katsanevas, S.; Tonazzo, A.

2016-05-01

Muon tomography is a potential non-invasive technique for internal structure scanning. It has already interesting applications in geophysics and can be used for archaeological purposes. Muon tomography is based on the measurement of the muon flux after crossing the structure studied. Differences on the mean density of these structures imply differences on the detected muon rate for a given direction. Based on this principle, Monte Carlo simulations represent a useful tool to provide a model of the expected muon rate and angular distribution depending on the composition of the studied object, being useful to estimate the expected detected muons and to better understand the experimental results. These simulations are mainly dependent on the geometry and composition of the studied object and on the modelling of the initial muon flux at surface. In this work, the potential of muon tomography in archaeology is presented and evaluated with Monte Carlo simulations by estimating the differences on the muon rate due to the presence of internal structures and its composition. The influence of the chosen muon model at surface in terms of energy and angular distributions in the final result has been also studied.

Automated classification of RNA 3D motifs and the RNA 3D Motif Atlas

PubMed Central

Petrov, Anton I.; Zirbel, Craig L.; Leontis, Neocles B.

2013-01-01

The analysis of atomic-resolution RNA three-dimensional (3D) structures reveals that many internal and hairpin loops are modular, recurrent, and structured by conserved non-Watson–Crick base pairs. Structurally similar loops define RNA 3D motifs that are conserved in homologous RNA molecules, but can also occur at nonhomologous sites in diverse RNAs, and which often vary in sequence. To further our understanding of RNA motif structure and sequence variability and to provide a useful resource for structure modeling and prediction, we present a new method for automated classification of internal and hairpin loop RNA 3D motifs and a new online database called the RNA 3D Motif Atlas. To classify the motif instances, a representative set of internal and hairpin loops is automatically extracted from a nonredundant list of RNA-containing PDB files. Their structures are compared geometrically, all-against-all, using the FR3D program suite. The loops are clustered into motif groups, taking into account geometric similarity and structural annotations and making allowance for a variable number of bulged bases. The automated procedure that we have implemented identifies all hairpin and internal loop motifs previously described in the literature. All motif instances and motif groups are assigned unique and stable identifiers and are made available in the RNA 3D Motif Atlas (http://rna.bgsu.edu/motifs), which is automatically updated every four weeks. The RNA 3D Motif Atlas provides an interactive user interface for exploring motif diversity and tools for programmatic data access. PMID:23970545

MOTIVATION INTERNALIZATION AND SIMPLEX STRUCTURE IN SELF-DETERMINATION THEORY.

PubMed

Ünlü, Ali; Dettweiler, Ulrich

2015-12-01

Self-determination theory, as proposed by Deci and Ryan, postulated different types of motivation regulation. As to the introjected and identified regulation of extrinsic motivation, their internalizations were described as "somewhat external" and "somewhat internal" and remained undetermined in the theory. This paper introduces a constrained regression analysis that allows these vaguely expressed motivations to be estimated in an "optimal" manner, in any given empirical context. The approach was even generalized and applied for simplex structure analysis in self-determination theory. The technique was exemplified with an empirical study comparing science teaching in a classical school class versus an expeditionary outdoor program. Based on a sample of 84 German pupils (43 girls, 41 boys, 10 to 12 years old), data were collected using the German version of the Academic Self-Regulation Questionnaire. The science-teaching format was seen to not influence the pupils' internalization of identified regulation. The internalization of introjected regulation differed and shifted more toward the external pole in the outdoor teaching format. The quantification approach supported the simplex structure of self-determination theory, whereas correlations may disconfirm the simplex structure.

Investigations of internal noise levels for different target sizes, contrasts, and noise structures

NASA Astrophysics Data System (ADS)

Han, Minah; Choi, Shinkook; Baek, Jongduk

2014-03-01

To describe internal noise levels for different target sizes, contrasts, and noise structures, Gaussian targets with four different sizes (i.e., standard deviation of 2,4,6 and 8) and three different noise structures(i.e., white, low-pass, and highpass) were generated. The generated noise images were scaled to have standard deviation of 0.15. For each noise type, target contrasts were adjusted to have the same detectability based on NPW, and the detectability of CHO was calculated accordingly. For human observer study, 3 trained observers performed 2AFC detection tasks, and correction rate, Pc, was calculated for each task. By adding proper internal noise level to numerical observer (i.e., NPW and CHO), detectability of human observer was matched with that of numerical observers. Even though target contrasts were adjusted to have the same detectability of NPW observer, detectability of human observer decreases as the target size increases. The internal noise level varies for different target sizes, contrasts, and noise structures, demonstrating different internal noise levels should be considered in numerical observer to predict the detection performance of human observer.

An innovative methodology for measurement of stress distribution of inflatable membrane structures

NASA Astrophysics Data System (ADS)

Zhao, Bing; Chen, Wujun; Hu, Jianhui; Chen, Jianwen; Qiu, Zhenyu; Zhou, Jinyu; Gao, Chengjun

2016-02-01

The inflatable membrane structure has been widely used in the fields of civil building, industrial building, airship, super pressure balloon and spacecraft. It is important to measure the stress distribution of the inflatable membrane structure because it influences the safety of the structural design. This paper presents an innovative methodology for the measurement and determination of the stress distribution of the inflatable membrane structure under different internal pressures, combining photogrammetry and the force-finding method. The shape of the inflatable membrane structure is maintained by the use of pressurized air, and the internal pressure is controlled and measured by means of an automatic pressure control system. The 3D coordinates of the marking points pasted on the membrane surface are acquired by three photographs captured from three cameras based on photogrammetry. After digitizing the markings on the photographs, the 3D curved surfaces are rebuilt. The continuous membrane surfaces are discretized into quadrilateral mesh and simulated by membrane links to calculate the stress distributions using the force-finding method. The internal pressure is simplified to the external node forces in the normal direction according to the contributory area of the node. Once the geometry x, the external force r and the topology C are obtained, the unknown force densities q in each link can be determined. Therefore, the stress distributions of the inflatable membrane structure can be calculated, combining the linear adjustment theory and the force density method based on the force equilibrium of inflated internal pressure and membrane internal force without considering the mechanical properties of the constitutive material. As the use of the inflatable membrane structure is attractive in the field of civil building, an ethylene-tetrafluoroethylene (ETFE) cushion is used with the measurement model to validate the proposed methodology. The comparisons between the obtained results and numerical simulation for the inflation process of the ETFE cushion are performed, and the strong agreements demonstrate that the proposed methodology is feasible and accurate.

Internal structure of copper(II)-phthalocyanine thin films on SiO2/Si substrates investigated by grazing incidence x-ray reflectometry

NASA Astrophysics Data System (ADS)

Brieva, A. C.; Jenkins, T. E.; Jones, D. G.; Strössner, F.; Evans, D. A.; Clark, G. F.

2006-04-01

The internal structure of copper(II)-phthalocyanine (CuPc) thin films grown on SiO2/Si by organic molecular beam deposition has been studied by grazing incidence x-ray reflectometry (GIXR) and atomic force microscopy. The electronic density profile is consistent with a structure formed by successive monolayers of molecules in the α form with the b axis lying in the substrate surface plane. The authors present an electronic density profile model of CuPc films grown on SiO2/Si. The excellent agreement between the model and experimental data allows postdeposition monitoring of the internal structure of the CuPc films with the nondestructive GIXR technique, providing a tool for accurate control of CuPc growth on silicon-based substrates. In addition, since the experiments have been carried out ex situ, they show that these structures can endure ambient conditions.

Knowledge-base browsing: an application of hybrid distributed/local connectionist networks

NASA Astrophysics Data System (ADS)

Samad, Tariq; Israel, Peggy

1990-08-01

We describe a knowledge base browser based on a connectionist (or neural network) architecture that employs both distributed and local representations. The distributed representations are used for input and output thereby enabling associative noise-tolerant interaction with the environment. Internally all representations are fully local. This simplifies weight assignment and facilitates network configuration for specific applications. In our browser concepts and relations in a knowledge base are represented using " microfeatures. " The microfeatures can encode semantic attributes structural features contextual information etc. Desired portions of the knowledge base can then be associatively retrieved based on a structured cue. An ordered list of partial matches is presented to the user for selection. Microfeatures can also be used as " bookmarks" they can be placed dynamically at appropriate points in the knowledge base and subsequently used as retrieval cues. A proof-of-concept system has been implemented for an internally developed Honeywell-proprietary knowledge acquisition tool. 1.

Women of Burma Speak Out: Workshops to Deconstruct Gender-Based Violence and Build Systems of Peace and Justice

ERIC Educational Resources Information Center

Norsworthy, Kathryn L.; Khuankaew, Ouyporn

2004-01-01

Refugee and internally displaced women of Burma examined structural and institutional violence against women within their communities within workshop formats. Group members also discussed strategies for transforming systems supporting gender-based violence into structures of peace and gender justice. The authors describe their methodology, based…

Disorders without borders: current and future directions in the meta-structure of mental disorders.

PubMed

Carragher, Natacha; Krueger, Robert F; Eaton, Nicholas R; Slade, Tim

2015-03-01

Classification is the cornerstone of clinical diagnostic practice and research. However, the extant psychiatric classification systems are not well supported by research evidence. In particular, extensive comorbidity among putatively distinct disorders flags an urgent need for fundamental changes in how we conceptualize psychopathology. Over the past decade, research has coalesced on an empirically based model that suggests many common mental disorders are structured according to two correlated latent dimensions: internalizing and externalizing. We review and discuss the development of a dimensional-spectrum model which organizes mental disorders in an empirically based manner. We also touch upon changes in the DSM-5 and put forward recommendations for future research endeavors. Our review highlights substantial empirical support for the empirically based internalizing-externalizing model of psychopathology, which provides a parsimonious means of addressing comorbidity. As future research goals, we suggest that the field would benefit from: expanding the meta-structure of psychopathology to include additional disorders, development of empirically based thresholds, inclusion of a developmental perspective, and intertwining genomic and neuroscience dimensions with the empirical structure of psychopathology.

Structural contingency theory and individual differences: examination of external and internal person-team fit.

PubMed

Hollenbeck, John R; Moon, Henry; Ellis, Aleksander P J; West, Bradley J; Ilgen, Daniel R; Sheppard, Lori; Porter, Christopher O L H; Wagner, John A

2002-06-01

This article develops and tests a structurally based, integrated theory of person-team fit. The theory developed is an extension of structural contingency theory and considers issues of external fit simultaneously with its examination of internal fit at the team level. Results from 80 teams working on an interdependent team task indicate that divisional structures demand high levels of cognitive ability on the part of teammembers. However, the advantages of high cognitive ability in divisional structures are neutralized when there is poor external fit between the structure and the environment. Instead, emotional stability becomes a critical factor among teammembers when a divisional structure is out of alignment with its environment. Individual differences seem to play little or no role in functional structures, regardless of the degree of external fit.

An international conference in honour of the centennial of the birth of Ya.B. Zeldovich, "Subatomic Particles, Nucleons, Atoms, the Universe: Processes and Structure"

NASA Astrophysics Data System (ADS)

Kilin, S. Ya.; Ruffini, R.; Vereshchagin, G.

2015-06-01

An international conference in honour of the centennial of the birth of Ya.B. Zeldovich, "Subatomic Particles, Nucleons, Atoms, the Universe: Processes and Structure" was held in Minsk, Belarus on March 10-14, 2014. Scientific papers based on plenary presentations made at this conference are being published in Volumes 6 and 7, 2015 of "Astronomy Reports."

Architecture of a Diels-Alderase ribozyme with a preformed catalytic pocket.

PubMed

Keiper, Sonja; Bebenroth, Dirk; Seelig, Burckhard; Westhof, Eric; Jäschke, Andres

2004-09-01

Artificial ribozymes catalyze a variety of chemical reactions. Their structures and reaction mechanisms are largely unknown. We have analyzed a ribozyme catalyzing Diels-Alder cycloaddition reactions by comprehensive mutation analysis and a variety of probing techniques. New tertiary interactions involving base pairs between nucleotides of the 5' terminus and a large internal loop forming a pseudoknot fold were identified. The probing data indicate a preformed tertiary structure that shows no major changes on substrate or product binding. Based on these observations, a molecular architecture featuring a Y-shaped arrangement is proposed. The tertiary structure is formed in a rather unusual way; that is, the opposite sides of the asymmetric internal loop are clamped by the four 5'-terminal nucleotides, forming two adjacent two base-pair helices. It is proposed that the catalytic pocket is formed by a wedge within one of these helices.

Survey of International Trade/Economics Textbooks.

ERIC Educational Resources Information Center

Lucier, Richard L.

1992-01-01

Reviews 14 international economics textbooks to help instructors with selection. Includes organization and structure, topics covered, and characteristics of the texts. Suggests considerations such as course length, level of abstraction desired, opinion of numerically based graphical analysis, extensiveness of examples and applications, and whether…

Maharishi International University

ERIC Educational Resources Information Center

Goldberg, Phil

1975-01-01

The director of curriculum development at Maharishi International University describes background and design of the program based on the Science of Creative Intelligence (SCI) as a unifying theoretical structure and on transcendental meditation (TM) for expanding awareness and utilizing videotape technology in its core curriculum courses. (JT)

Energy structure of MHD flow coupling with outer resistance circuit

NASA Astrophysics Data System (ADS)

Huang, Z. Y.; Liu, Y. J.; Chen, Y. Q.; Peng, Z. L.

2015-08-01

Energy structure of MHD flow coupling with outer resistance circuit is studied to illuminate qualitatively and quantitatively the energy relation of this basic MHD flow system with energy input and output. Energy structure are analytically derived based on the Navier-Stocks equations for two-dimensional fully-developed flow and generalized Ohm's Law. The influences of applied magnetic field, Hall parameter and conductivity on energy structure are discussed based on the analytical results. Associated energies in MHD flow are deduced and validated by energy conservation. These results reveal that energy structure consists of two sub structures: electrical energy structure and internal energy structure. Energy structure and its sub structures provide an integrated theoretical energy path of the MHD system. Applied magnetic field and conductivity decrease the input energy, dissipation by fluid viscosity and internal energy but increase the ratio of electrical energy to input energy, while Hall parameter has the opposite effects. These are caused by their different effects on Bulk velocity, velocity profiles, voltage and current in outer circuit. Understanding energy structure helps MHD application designers to actively adjust the allocation of different parts of energy so that it is more reasonable and desirable.

A discrete time-varying internal model-based approach for high precision tracking of a multi-axis servo gantry.

PubMed

Zhang, Zhen; Yan, Peng; Jiang, Huan; Ye, Peiqing

2014-09-01

In this paper, we consider the discrete time-varying internal model-based control design for high precision tracking of complicated reference trajectories generated by time-varying systems. Based on a novel parallel time-varying internal model structure, asymptotic tracking conditions for the design of internal model units are developed, and a low order robust time-varying stabilizer is further synthesized. In a discrete time setting, the high precision tracking control architecture is deployed on a Voice Coil Motor (VCM) actuated servo gantry system, where numerical simulations and real time experimental results are provided, achieving the tracking errors around 3.5‰ for frequency-varying signals. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

PREFACE: International Conference on Structural Nano Composites (NANOSTRUC 2012)

NASA Astrophysics Data System (ADS)

Njuguna, James

2012-09-01

Dear Colleagues It is a great pleasure to welcome you to NanoStruc2012 at Cranfield University. The purpose of the 2012 International Conference on Structural Nano Composites (NanoStruc2012) is to promote activities in various areas of materials and structures by providing a forum for exchange of ideas, presentation of technical achievements and discussion of future directions. NanoStruc brings together an international community of experts to discuss the state-of-the-art, new research results, perspectives of future developments, and innovative applications relevant to structural materials, engineering structures, nanocomposites, modelling and simulations, and their related application areas. The conference is split in 7 panel sessions, Metallic Nanocomposites and Coatings, Silica based Nanocomposites, safty of Nanomaterials, Carboin based Nanocomposites, Multscale Modelling, Bio materials and Application of Nanomaterials. All accepted Papers will be published in the IOP Conference Series: Materials Science and Engineering (MSE), and included in the NanoStruc online digital library. The abstracts will be indexed in Scopus, Compedex, Inspec, INIS (International Nuclear Information System), Chemical Abstracts, NASA Astrophysics Data System and Polymer Library. Before ending this message, I would like to acknowledge the hard work, professional skills and efficiency of the team which ensured the general organisation. As a conclusion, I would like to Welcome you to the Nanostruc2012 and wish you a stimulating Conference and a wonderful time. On behalf of the scientific committee, Signature James Njuguna Conference Chair The PDF of this preface also contains committee listings and associates logos.

Deciphering the internal complexity of living cells with quantitative phase microscopy: a multiscale approach

NASA Astrophysics Data System (ADS)

Martinez-Torres, Cristina; Laperrousaz, Bastien; Berguiga, Lotfi; Boyer-Provera, Elise; Elezgaray, Juan; Nicolini, Franck E.; Maguer-Satta, Veronique; Arneodo, Alain; Argoul, Françoise

2015-09-01

The distribution of refractive indices (RIs) of a living cell contributes in a nonintuitive manner to its optical phase image and quite rarely can be inverted to recover its internal structure. The interpretation of the quantitative phase images of living cells remains a difficult task because (1) we still have very little knowledge on the impact of its internal macromolecular complexes on the local RI and (2) phase changes produced by light propagation through the sample are mixed with diffraction effects by the internal cell bodies. We propose to implement a two-dimensional wavelet-based contour chain detection method to distinguish internal boundaries based on their greatest optical path difference gradients. These contour chains correspond to the highest image phase contrast and follow the local RI inhomogeneities linked to the intracellular structural intricacy. Their statistics and spatial distribution are the morphological indicators suited for comparing cells of different origins and/or to follow their transformation in pathologic situations. We use this method to compare nonadherent blood cells from primary and laboratory culture origins and to assess the internal transformation of hematopoietic stem cells by the transduction of the BCR-ABL oncogene responsible for the chronic myelogenous leukemia.

pH-driven colloidal transformations based on the vasoactive drug nicergoline.

PubMed

Salentinig, Stefan; Tangso, Kristian J; Hawley, Adrian; Boyd, Ben J

2014-12-16

The structure of colloidal self-assembled drug delivery systems can be influenced by intermolecular interactions between drug and amphiphilic molecules, and is important to understand in the context of designing improved delivery systems. Controlling these structures can enable controlled or targeted release systems for poorly water-soluble drugs. Here we present the interaction of the hydrophobic vasoactive drug nicergoline with the internal structure of nanostructured emulsion particles based on the monoglyceride-water system. Addition of this drug leads to modification of the internal bicontinuous cubic structure to generate highly pH-responsive systems. The colloidal structures were characterized with small-angle X-ray scattering and visualized using cryogenic transmission electron microscopy. Reversible transformations to inverse micelles at high pH, vesicles at low pH, and the modification of the spacing of the bicontinuous cubic structure at intermediate pH were observed, and enabled the in situ determination of an apparent pKa for the drug in this system--a difficult task using solution-based approaches. The characterization of this phase behavior is also highly interesting for the design of pH-responsive controlled release systems for poorly water-soluble drug molecules.

Spectroscopy of Isolated Prebiotic Nucleobases

NASA Technical Reports Server (NTRS)

Svadlenak, Nathan; Callahan, Michael P.; Ligare, Marshall; Gulian, Lisa; Gengeliczki, Zsolt; Nachtigallova, Dana; Hobza, Pavel; deVries, Mattanjah

2011-01-01

We use multiphoton ionization and double resonance spectroscopy to study the excited state dynamics of biologically relevant molecules as well as prebiotic nucleobases, isolated in the gas phase. Molecules that are biologically relevant to life today tend to exhibit short excited state lifetimes compared to similar but non-biologically relevant analogs. The mechanism is internal conversion, which may help protect the biologically active molecules from UV damage. This process is governed by conical intersections that depend very strongly on molecular structure. Therefore we have studied purines and pyrimidines with systematic variations of structure, including substitutions, tautomeric forms, and cluster structures that represent different base pair binding motifs. These structural variations also include possible alternate base pairs that may shed light on prebiotic chemistry. With this in mind we have begun to probe the ultrafast dynamics of molecules that exhibit very short excited states and search for evidence of internal conversions.

Molecular phylogeny of 21 tropical bamboo species reconstructed by integrating non-coding internal transcribed spacer (ITS1 and 2) sequences and their consensus secondary structure.

PubMed

Ghosh, Jayadri Sekhar; Bhattacharya, Samik; Pal, Amita

2017-06-01

The unavailability of the reproductive structure and unpredictability of vegetative characters for the identification and phylogenetic study of bamboo prompted the application of molecular techniques for greater resolution and consensus. We first employed internal transcribed spacer (ITS1, 5.8S rRNA and ITS2) sequences to construct the phylogenetic tree of 21 tropical bamboo species. While the sequence alone could grossly reconstruct the traditional phylogeny amongst the 21-tropical species studied, some anomalies were encountered that prompted a further refinement of the phylogenetic analyses. Therefore, we integrated the secondary structure of the ITS sequences to derive individual sequence-structure matrix to gain more resolution on the phylogenetic reconstruction. The results showed that ITS sequence-structure is the reliable alternative to the conventional phenotypic method for the identification of bamboo species. The best-fit topology obtained by the sequence-structure based phylogeny over the sole sequence based one underscores closer clustering of all the studied Bambusa species (Sub-tribe Bambusinae), while Melocanna baccifera, which belongs to Sub-Tribe Melocanneae, disjointedly clustered as an out-group within the consensus phylogenetic tree. In this study, we demonstrated the dependability of the combined (ITS sequence+structure-based) approach over the only sequence-based analysis for phylogenetic relationship assessment of bamboo.

NMR Structure of Francisella tularensis Virulence Determinant Reveals Structural Homology to Bet v1 Allergen Proteins.

PubMed

Zook, James; Mo, Gina; Sisco, Nicholas J; Craciunescu, Felicia M; Hansen, Debra T; Baravati, Bobby; Cherry, Brian R; Sykes, Kathryn; Wachter, Rebekka; Van Horn, Wade D; Fromme, Petra

2015-06-02

Tularemia is a potentially fatal bacterial infection caused by Francisella tularensis, and is endemic to North America and many parts of northern Europe and Asia. The outer membrane lipoprotein, Flpp3, has been identified as a virulence determinant as well as a potential subunit template for vaccine development. Here we present the first structure for the soluble domain of Flpp3 from the highly infectious Type A SCHU S4 strain, derived through high-resolution solution nuclear magnetic resonance (NMR) spectroscopy; the first structure of a lipoprotein from the genus Francisella. The Flpp3 structure demonstrates a globular protein with an electrostatically polarized surface containing an internal cavity-a putative binding site based on the structurally homologous Bet v1 protein family of allergens. NMR-based relaxation studies suggest loop regions that potentially modulate access to the internal cavity. The Flpp3 structure may add to the understanding of F. tularensis virulence and contribute to the development of effective vaccines. Copyright © 2015 Elsevier Ltd. All rights reserved.

Development of user-centered interfaces to search the knowledge resources of the Virginia Henderson International Nursing Library.

PubMed

Jones, Josette; Harris, Marcelline; Bagley-Thompson, Cheryl; Root, Jane

2003-01-01

This poster describes the development of user-centered interfaces in order to extend the functionality of the Virginia Henderson International Nursing Library (VHINL) from library to web based portal to nursing knowledge resources. The existing knowledge structure and computational models are revised and made complementary. Nurses' search behavior is captured and analyzed, and the resulting search models are mapped to the revised knowledge structure and computational model.

Design of complex bone internal structure using topology optimization with perimeter control.

PubMed

Park, Jaejong; Sutradhar, Alok; Shah, Jami J; Paulino, Glaucio H

2018-03-01

Large facial bone loss usually requires patient-specific bone implants to restore the structural integrity and functionality that also affects the appearance of each patient. Titanium alloys (e.g., Ti-6Al-4V) are typically used in the interfacial porous coatings between the implant and the surrounding bone to promote stability. There exists a property mismatch between the two that in general leads to complications such as stress-shielding. This biomechanical discrepancy is a hurdle in the design of bone replacements. To alleviate the mismatch, the internal structure of the bone replacements should match that of the bone. Topology optimization has proven to be a good technique for designing bone replacements. However, the complex internal structure of the bone is difficult to mimic using conventional topology optimization methods without additional restrictions. In this work, the complex bone internal structure is recovered using a perimeter control based topology optimization approach. By restricting the solution space by means of the perimeter, the intricate design complexity of bones can be achieved. Three different bone regions with well-known physiological loadings are selected to illustrate the method. Additionally, we found that the target perimeter value and the pattern of the initial distribution play a vital role in obtaining the natural curvatures in the bone internal structures as well as avoiding excessive island patterns. Copyright © 2018 Elsevier Ltd. All rights reserved.

Ownership strategies of multinational corporations: Towards designing effective global networks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Raghunathan, S.P.

1992-01-01

The thesis of this research is that MNCs, attempting to implement different international strategies in response to several environmental factors, let their global networks evolve. The ownership structure of the network is therefore a function of the international strategy and environment of a firm. A particular strategy (configuration/coordination), given a certain environment, may be effective if associated with the appropriate structure. This study is based on a survey of 318 US manufacturing-sector MNCs using a questionnaire. The ownership structure of an MNC network was identified by studying the nature of ownership - method and form - of overseas subsidiaries. Usingmore » network theoretic methods, ownership structure was empirically related to international environment, strategy, and performance. Results of this study throw light on the design of global networks and enable a general theory of the design of MNCs to be eventually developed.« less

Structural Requirement in Clostridium perfringens Collagenase mRNA 5′ Leader Sequence for Translational Induction through Small RNA-mRNA Base Pairing

PubMed Central

Nomura, Nobuhiko; Nakamura, Kouji

2013-01-01

The Gram-positive anaerobic bacterium Clostridium perfringens is pathogenic to humans and animals, and the production of its toxins is strictly regulated during the exponential phase. We recently found that the 5′ leader sequence of the colA transcript encoding collagenase, which is a major toxin of this organism, is processed and stabilized in the presence of the small RNA VR-RNA. The primary colA 5′-untranslated region (5′UTR) forms a long stem-loop structure containing an internal bulge and masks its own ribosomal binding site. Here we found that VR-RNA directly regulates colA expression through base pairing with colA mRNA in vivo. However, when the internal bulge structure was closed by point mutations in colA mRNA, translation ceased despite the presence of VR-RNA. In addition, a mutation disrupting the colA stem-loop structure induced mRNA processing and ColA-FLAG translational activation in the absence of VR-RNA, indicating that the stem-loop and internal bulge structure of the colA 5′ leader sequence is important for regulation by VR-RNA. On the other hand, processing was required for maximal ColA expression but was not essential for VR-RNA-dependent colA regulation. Finally, colA processing and translational activation were induced at a high temperature without VR-RNA. These results suggest that inhibition of the colA 5′ leader structure through base pairing is the primary role of VR-RNA in colA regulation and that the colA 5′ leader structure is a possible thermosensor. PMID:23585542

A Knowledge-Based Approach to Language Production

DTIC Science & Technology

1985-08-01

representation -- the internal structures which the system is generating from. and (3) the choice problem -- how the intricate relationship between the...texts from several different internal representations. One example of the output produced by MUMBLE is the following text, produced from a...brackets. This notation is used to illustrate some templates which are encoded in Ace. The internal representation of these templates is achieved using

Pollen structure visualization using high-resolution laboratory-based hard X-ray tomography.

PubMed

Li, Qiong; Gluch, Jürgen; Krüger, Peter; Gall, Martin; Neinhuis, Christoph; Zschech, Ehrenfried

2016-10-14

A laboratory-based X-ray microscope is used to investigate the 3D structure of unstained whole pollen grains. For the first time, high-resolution laboratory-based hard X-ray microscopy is applied to study pollen grains. Based on the efficient acquisition of statistically relevant information-rich images using Zernike phase contrast, both surface- and internal structures of pine pollen - including exine, intine and cellular structures - are clearly visualized. The specific volumes of these structures are calculated from the tomographic data. The systematic three-dimensional study of pollen grains provides morphological and structural information about taxonomic characters that are essential in palynology. Such studies have a direct impact on disciplines such as forestry, agriculture, horticulture, plant breeding and biodiversity. Copyright © 2016 Elsevier Inc. All rights reserved.

Tradition for Development: Indigenous Structures and Folk Media in Non-Formal Education. Report and Papers from the International Seminar on The Use of Indigenous Social Structures and Traditional Media in Non-Formal Education and Development (Berlin, West Germany. November 5-12, 1980).

ERIC Educational Resources Information Center

Kidd, Ross, Ed.; Colletta, Nat, Ed.

Case studies and seminar reports are provided that were presented at an international seminar to examine field experiences in using a culture-based approach to nonformal education. Part I, containing an introductory paper and nine case studies, focuses on indigenous institutions and processes in health, family planning, agriculture, basic…

The internal structure of the planets Mercury, Venus, Mars and Jupiter according to the Savic-Kasanin theory

NASA Astrophysics Data System (ADS)

Savic, P.

The internal structure of Mercury, Venus, Mars, and Jupiter is considered in the framework of the Savic-Kasanin theory of the behavior of materials under high pressure. The main hypothesis underlying the theory is based on the deformation of the electron shells by the dislocation and ejection of electrons from atoms in a given material. This theory is discussed in relation to the spontaneous effect of gravitation and cooling on atoms in the material of a celestial body.

Student Satisfaction with an Innovative Internship

ERIC Educational Resources Information Center

Petrila, Ann; Fireman, Orah; Fitzpatrick, Leslie Schnoll; Hodas, Robyn Wertheimer; Taussig, Heather N.

2015-01-01

This article describes an internship program designed specifically to meet graduate students' training needs within the context of their work in a prevention program for children in foster care. An internship based on a strong model of intern recruitment and supervision, structured inclusion of interns in a supportive agency culture, a…

The Atacama Large Millimeter/Submillimeter Array (ALMA) - A Successful Three-Way International Partnership Without a Majority Stakeholder

NASA Astrophysics Data System (ADS)

Vanden Bout, Paul A.

2013-04-01

The Atacama Millimeter/Submillimeter Array (ALMA) is the largest ground-based astronomical facility built to date. It's size and challenging site required an international effort. This talk presents the partnership structure, management challenges, current status, and examples of early scientific successes.

Perceived Social Relationships and Science Learning Outcomes for Taiwanese Eighth Graders: Structural Equation Modeling with a Complex Sampling Consideration

ERIC Educational Resources Information Center

Jen, Tsung-Hau; Lee, Che-Di; Chien, Chin-Lung; Hsu, Ying-Shao; Chen, Kuan-Ming

2013-01-01

Based on the Trends in International Mathematics and Science Study 2007 study and a follow-up national survey, data for 3,901 Taiwanese grade 8 students were analyzed using structural equation modeling to confirm a social-relation-based affection-driven model (SRAM). SRAM hypothesized relationships among students' perceived social relationships in…

X-ray Tomography and Chemical Imaging within Butterfly Wing Scales

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen Jianhua; Lee Yaochang; Tang, M.-T.

2007-01-19

The rainbow like color of butterfly wings is associated with the internal and surface structures of the wing scales. While the photonic structure of the scales is believed to diffract specific lights at different angle, there is no adequate probe directly answering the 3-D structures with sufficient spatial resolution. The NSRRC nano-transmission x-ray microscope (nTXM) with tens nanometers spatial resolution is able to image biological specimens without artifacts usually introduced in sophisticated sample staining processes. With the intrinsic deep penetration of x-rays, the nTXM is capable of nondestructively investigating the internal structures of fragile and soft samples. In this study,more » we imaged the structure of butterfly wing scales in 3-D view with 60 nm spatial resolution. In addition, synchrotron-radiation-based Fourier transform Infrared (FT-IR) microspectroscopy was employed to analyze the chemical components with spatial information of the butterfly wing scales. Based on the infrared spectral images, we suggest that the major components of scale structure were rich in protein and polysaccharide.« less

Determinants of environmental audit frequency: the role of firm organizational structure.

PubMed

Earnhart, Dietrich; Leonard, J Mark

2013-10-15

This study empirically examines the extent of environmental management practiced by US chemical manufacturing facilities, as reflected in the number of environmental internal audits conducted annually. As its focus, this study analyzes the effects of firm-level organizational structure on facility-level environmental management practices. For this empirical analysis, the study exploits unique data from a survey distributed to all U.S. chemical manufacturing permitted to discharge wastewater in 2001; the data reflect internal audits conducted during the years 1999-2001. Empirical results reveal differences in auditing behavior based on whether facilities are owned by publicly held or non-publicly held firms, owned by U.S.-based or non-U.S.-based firms, and owned by larger or smaller firms. Copyright © 2013 Elsevier Ltd. All rights reserved.

Internal friction in enzyme reactions.

PubMed

Rauscher, Anna; Derényi, Imre; Gráf, László; Málnási-Csizmadia, András

2013-01-01

The empirical concept of internal friction was introduced 20 years ago. This review summarizes the results of experimental and theoretical studies that help to uncover the nature of internal friction. After the history of the concept, we describe the experimental challenges in measuring and interpreting internal friction based on the viscosity dependence of enzyme reactions. We also present speculations about the structural background of this viscosity dependence. Finally, some models about the relationship between the energy landscape and internal friction are outlined. Alternative concepts regarding the viscosity dependence of enzyme reactions are also discussed. Copyright © 2012 International Union of Biochemistry and Molecular Biology, Inc.

Mechanical Response Analysis of Long-life Asphalt Pavement Structure of Yunluo High-speed on the Semi-rigid Base

NASA Astrophysics Data System (ADS)

Liu, Feng; Wu, Chuanhai; Xu, Xinquan; Li, Hao; Wang, Zhixiang

2018-01-01

In order to grasp the rule of the strain change of the semi-rigid asphalt pavement structure under the FWD load and provide a reliable theoretical and practical basis for the design of the pavement structure, based on the test section of Guangdong Yunluo expressway, taking FWD as the loading tool, by using the finite element analysis software ANSYS, the internal variation rules of each pavement structural layer were obtained. Based on the results of the theoretical analysis, the measured strain sensor was set up in the corresponding layer of the pavement structure, and the strain test plan was determined. Based on the analysis of the strain data obtained from several structural layers and field monitoring, the rationality of the type pavement structure and the strain test scheme were verified, so as to provide useful help for the design and the maintenance of the pavement structure.

Finite Element Based HWB Centerbody Structural Optimization and Weight Prediction

NASA Technical Reports Server (NTRS)

Gern, Frank H.

2012-01-01

This paper describes a scalable structural model suitable for Hybrid Wing Body (HWB) centerbody analysis and optimization. The geometry of the centerbody and primary wing structure is based on a Vehicle Sketch Pad (VSP) surface model of the aircraft and a FLOPS compatible parameterization of the centerbody. Structural analysis, optimization, and weight calculation are based on a Nastran finite element model of the primary HWB structural components, featuring centerbody, mid section, and outboard wing. Different centerbody designs like single bay or multi-bay options are analyzed and weight calculations are compared to current FLOPS results. For proper structural sizing and weight estimation, internal pressure and maneuver flight loads are applied. Results are presented for aerodynamic loads, deformations, and centerbody weight.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, T.P.

Sensors for the determination of pH have been developed which are based on the immobilization of direct dyes at hydrolyzed cellulosic films. The performance and structural characteristics of the sensors were investigated by a variety of spectroscopic methods, and applications for remote sensing were developed. Films of cellulose acetate were base hydrolyzed in 0.07 M KOH to yield a porous support structure. The structural changes resulting from the hydrolysis on cellulose acetate were probed with infrared internal reflectance spectroscopy. The progress of the hydrolysis reaction was monitored by the changes in vibrational modes of the acetyl group, and other spectralmore » changes indicated changes in film thickness as a result of solvent incorporation. Direct dyes, including Congo Red and C. I. Direct Blue 8, were then immobilized at these porous cellulosic films. The optical response characteristics of the Congo Red pH sensor were characterized, including the UV-visible absorption spectra as a function of pH, the response time as a function of ionic strength and ionic size of electrolyte, the long-term stability of the sensor, the effects of metal-ion interference, and the concentration of Congo Red in the polymer film. The structural characteristics of the sensor were investigated by internal reflectance spectroscopy and resonance-enhanced Raman spectroscopy, and the protonation sites were identified as the two azo groups of Congo Red. Infrared internal reflection spectra of immobilized Congo Red led to the development of a sensor for pH based on infrared spectroscopy. Finally, a two-wavelength fiber-optic photometer, which is based on solid-state sources and detectors, and a fiber-optic photometer, which is based on solid-state sources and detectors, and a fiber-optic probe were developed for pH determinations using Congo Red and C. I. Direct Blue 8 pH sensors.« less

Measuring the learning capacity of organisations: development and factor analysis of the Questionnaire for Learning Organizations.

PubMed

Oudejans, S C C; Schippers, G M; Schramade, M H; Koeter, M W J; van den Brink, W

2011-04-01

To investigate internal consistency and factor structure of a questionnaire measuring learning capacity based on Senge's theory of the five disciplines of a learning organisation: Personal Mastery, Mental Models, Shared Vision, Team Learning, and Systems Thinking. Cross-sectional study. Substance-abuse treatment centres (SATCs) in The Netherlands. A total of 293 SATC employees from outpatient and inpatient treatment departments, financial and human resources departments. Psychometric properties of the Questionnaire for Learning Organizations (QLO), including factor structure, internal consistency, and interscale correlations. A five-factor model representing the five disciplines of Senge showed good fit. The scales for Personal Mastery, Shared Vision and Team Learning had good internal consistency, but the scales for Systems Thinking and Mental Models had low internal consistency. The proposed five-factor structure was confirmed in the QLO, which makes it a promising instrument to assess learning capacity in teams. The Systems Thinking and the Mental Models scales have to be revised. Future research should be aimed at testing criterion and discriminatory validity.

Dimensional metrology of lab-on-a-chip internal structures: a comparison of optical coherence tomography with confocal fluorescence microscopy.

PubMed

Reyes, D R; Halter, M; Hwang, J

2015-07-01

The characterization of internal structures in a polymeric microfluidic device, especially of a final product, will require a different set of optical metrology tools than those traditionally used for microelectronic devices. We demonstrate that optical coherence tomography (OCT) imaging is a promising technique to characterize the internal structures of poly(methyl methacrylate) devices where the subsurface structures often cannot be imaged by conventional wide field optical microscopy. The structural details of channels in the devices were imaged with OCT and analyzed with an in-house written ImageJ macro in an effort to identify the structural details of the channel. The dimensional values obtained with OCT were compared with laser-scanning confocal microscopy images of channels filled with a fluorophore solution. Attempts were also made using confocal reflectance and interferometry microscopy to measure the channel dimensions, but artefacts present in the images precluded quantitative analysis. OCT provided the most accurate estimates for the channel height based on an analysis of optical micrographs obtained after destructively slicing the channel with a microtome. OCT may be a promising technique for the future of three-dimensional metrology of critical internal structures in lab-on-a-chip devices because scans can be performed rapidly and noninvasively prior to their use. © 2015 The Authors Journal of Microscopy © 2015 Royal Microscopical Society.

The Micromorphological Research of the Internal Structure of Chairside CAD/CAM Materials by the Method of Scanning Impulse Acoustic Microscopy (SIAM).

PubMed

Goryainova, Kristina E; Morokov, Egor S; Retinskaja, Marina V; Rusanov, Fedor S; Apresyan, Samvel V; Lebedenko, Igor Yu

2018-01-01

The aim of the present work was to compare the elastic properties and internal structure of 4 different CAD/CAM chairside materials, by the method of Scanning Impulse Acoustic Microscopy (SIAM). Four chairside CAD/CAM materials with different structures from hybrid ceramic (VITA Enamic, VITA Zahnfabrik), feldspatic ceramic (VITABlocs Mark II, VITA Zahnfabrik), leucite glass-ceramic (IPS Empress CAD, Ivoclar Vivadent) and PMMA (Telio CAD, Ivoclar Vivadent) were examined by Scanning Impulse Acoustic Microscope (SIAM). The results of micromorphological research of CAD/CAM chairside materials using SIAM method showed differences between the internal structures of these materials. The internal structure of feldspatic and glass-ceramic samples revealed the presence of pores with different sizes, from 10 to 100 microns; the structure of polymer materials rendered some isolated defects, while in the structure of hybrid material, defects were not found. Based on the results obtained from the present study, in cases of chairside production of dental crowns, it would be advisable to give preference to the blocks of hybrid ceramics. Such ceramics devoid of quite large porosity, glazing for CAD/CAM crowns made from leucite glass-ceramic and feldspatic ceramic may be an option. For these purposes, commercially available special muffle furnace for clinical and laboratory individualization and glazing of ceramic prostheses were provided. Further studies are needed to confirm the evidence emerging from the present research.

TOWARDS REFINED USE OF TOXICITY DATA IN STATISTICALLY BASED SAR MODELS FOR DEVELOPMENTAL TOXICITY.

EPA Science Inventory

In 2003, an International Life Sciences Institute (ILSI) Working Group examined the potential of statistically based structure-activity relationship (SAR) models for use in screening environmental contaminants for possible developmental toxicants.

Automatic on-line detection system design research on internal defects of metal materials based on optical fiber F-P sensing technology

NASA Astrophysics Data System (ADS)

Xia, Liu; Shan, Ning; Chao, Ban; Caoshan, Wang

2016-10-01

Metal materials have been used in aerospace and other industrial fields widely because of its excellent characteristics, so its internal defects detection is very important. Ultrasound technology is used widely in the fields of nondestructive detection because of its excellent characteristic. But the conventional detection instrument for ultrasound, which has shortcomings such as low intelligent level and long development cycles, limits its development. In this paper, the theory of ultrasound detection is analyzed. A computational method of the defects distributional position is given. The non-contact type optical fiber F-P interference cavity structure is designed and the length of origin cavity is given. The real-time on-line ultrasound detecting experiment devices for internal defects of metal materials is established based on the optical fiber F-P sensing system. The virtual instrument of automation ultrasound detection internal defects is developed based on LabVIEW software and the experimental study is carried out. The results show that this system can be used in internal defect real-time on-line locating of engineering structures effectively. This system has higher measurement precision. Relative error is 6.7%. It can be met the requirement of engineering practice. The system is characterized by simple operation, easy realization. The software has a friendly interface, good expansibility, and high intelligent level.

Characterization and analysis of Porous, Brittle solid structures by X-ray micro computed tomography

NASA Astrophysics Data System (ADS)

Lin, C. L.; Videla, A. R.; Yu, Q.; Miller, J. D.

2010-12-01

The internal structure of porous, brittle solid structures, such as porous rock, foam metal and wallboard, is extremely complex. For example, in the case of wallboard, the air bubble size and the thickness/composition of the wall structure are spatial parameters that vary significantly and influence mechanical, thermal, and acoustical properties. In this regard, the complex geometry and the internal texture of material, such as wallboard, is characterized and analyzed in 3-D using cone beam x-ray micro computed tomography. Geometrical features of the porous brittle structure are quantitatively analyzed based on calibration of the x-ray linear attenuation coefficient, use of a 3-D watershed algorithm, and use of a 3-D skeletonization procedure. Several examples of the 3-D analysis for porous, wallboard structures are presented and the results discussed.

Feasibility study of archaeological structures scanning by muon tomography

NASA Astrophysics Data System (ADS)

Gómez, H.; Carloganu, C.; Gibert, D.; Marteau, J.; Niess, V.; Katsanevas, S.; Tonazzo, A.

2015-08-01

One of the main concerns in archaeology is to find of a method to study precisely archaeological structures in the least invasive way possible to avoid damage. The requirement of preserving the structures integrity prevents, in the case of pyramids or tumuli, the study of any internal structure (halls or tombs) which are not reachable by existing corridors. One non-invasive method is the muon tomography. By placing a detector which allows to register the muon direction after the structure, it is possible to have an idea of its composition based on the attenuation of the muon flux, which depends on the material length and density that muons have crossed. This technique, alone or together with other exploration techniques as seismic tomography or electrical resistivity tomography, can provide useful information about the internal structure of the archaeological form that can not be obtained by conventional archaeological methods. In this work, the time measurement necessary to obtain a significant result about the composition of an archaeological structure is estimated. To do that, a Monte Carlo simulation framework based on the MUSIC software, properly tuned for this study, has been developed. The particular case of the Kastas Amfipoli Macedonian tumulus has been considered to perform the simulations.

Does standardised structured reporting contribute to quality in diagnostic pathology? The importance of evidence-based datasets.

PubMed

Ellis, D W; Srigley, J

2016-01-01

Key quality parameters in diagnostic pathology include timeliness, accuracy, completeness, conformance with current agreed standards, consistency and clarity in communication. In this review, we argue that with worldwide developments in eHealth and big data, generally, there are two further, often overlooked, parameters if our reports are to be fit for purpose. Firstly, population-level studies have clearly demonstrated the value of providing timely structured reporting data in standardised electronic format as part of system-wide quality improvement programmes. Moreover, when combined with multiple health data sources through eHealth and data linkage, structured pathology reports become central to population-level quality monitoring, benchmarking, interventions and benefit analyses in public health management. Secondly, population-level studies, particularly for benchmarking, require a single agreed international and evidence-based standard to ensure interoperability and comparability. This has been taken for granted in tumour classification and staging for many years, yet international standardisation of cancer datasets is only now underway through the International Collaboration on Cancer Reporting (ICCR). In this review, we present evidence supporting the role of structured pathology reporting in quality improvement for both clinical care and population-level health management. Although this review of available evidence largely relates to structured reporting of cancer, it is clear that the same principles can be applied throughout anatomical pathology generally, as they are elsewhere in the health system.

Micro-scale investigation on the quasi-static behavior of granular material

NASA Astrophysics Data System (ADS)

Li, Xia

Granular material exhibits complex responses when subjected to various external loading. Fundamental mechanisms have not been well established so far, including that about the critical state, one of the most important concepts in the modern soil mechanics. With the recognition that granular material is discrete in nature, the basic understanding can only be obtained from the particle scale. The complexity in granular material behavior lies in the fact that the macroscopic behavior of granular material is determined by not only the interactions operating at contacts, but also how the particles become arranged in space to form an internal structure. This research is aimed to microscopically investigate the influence of the internal structure and the fundamental mechanism about the critical state. In view of the extensive laboratory test data already available in the literature, a numerical simulation method, DEM, is employed as the tool to conduct particle-scale investigations. The contact model for two in-contact circular disks is derived theoretically from the elasticity theory, and the result is a linear contact model with constant stiffness and lateral sliding. Based on the contact model, a systematic series of numerical tests has been implemented, and the results can successfully reproduce the main characteristics in the behavior of natural granular material, under various loading conditions. The macro-micro relationship is the link between the investigations at the two worlds. The key point is to describe the internal structure with the two dual cell systems, a particle cell system and a void cell system. Based on these two systems, the stress and strain in a uniform field are equivalently expressed in terms of the contact forces/relative displacements, and the micro-geometrical variables. With the microstructural definition of the stress tensor, the stress state of granular material is studied microscopically. The stress-fabric-force relation is derived, based on the variables describing the statistics of the contact forces and the contact vectors. By studying the evolution of the micro-quantities during shearing, how the internal structure affects the macro stress state under different loading condition is revealed. With the assumption that the influence of the local variance in stress is ignorable, the response of granular material can be investigated based on the void cell system. Starting from the behavior of a single void cell, the evolutions of the internal structure and its influence on the response of granular material are explained. The stress ratio and the dilatancy behavior of granular material are investigated. The influences of the void ratio, the mean normal stress and the drainage condition are discussed. The fundamental mechanism of the critical state is studied in the framework of thermodynamics with properly considering the influence of the internal structure. The normalized stress ratio tensor at critical state is associated with the critical void cell anisotropy, corresponding to the maximal energy dissipation. The (e, p) relationship at critical state is associated with the critical combination of the void cell size and the contact interactions, corresponding to the minimal free energy. The investigation on the influence of the internal structure anisotropy on the granular material behavior and the critical state is carried out. The results show that at small strain levels, the behavior of granular material is mainly affected by the initial fabric. As shearing continuous, the internal structure of granular material is gradually changed. The granular material approaches the critical state, which is irrespective with the initial internal structure. The critical state of granular material is not unique. With different loading modes, the critical state of granular material, including both the critical stress ratio and the critical (e, p) relations, are found to be different. A fabric tensor is defined based on the characteristics of the void cells. The laboratory method to quantify the fabric anisotropy is proposed by deviatoric shearing. 3D numerical simulations have been carried out to investigate the influence of the loading mode, which is found to be an important factor in the large strain behavior of granular material. With the obtained microscopic understanding, the influence of contact model on granular material behavior is investigated. A method to quantify the fabric anisotropy is proposed. And a simple discussion on the state variable used in the elasto-plastic constitutive model is given.

Correlation of RNA secondary structure statistics with thermodynamic stability and applications to folding.

PubMed

Wu, Johnny C; Gardner, David P; Ozer, Stuart; Gutell, Robin R; Ren, Pengyu

2009-08-28

The accurate prediction of the secondary and tertiary structure of an RNA with different folding algorithms is dependent on several factors, including the energy functions. However, an RNA higher-order structure cannot be predicted accurately from its sequence based on a limited set of energy parameters. The inter- and intramolecular forces between this RNA and other small molecules and macromolecules, in addition to other factors in the cell such as pH, ionic strength, and temperature, influence the complex dynamics associated with transition of a single stranded RNA to its secondary and tertiary structure. Since all of the factors that affect the formation of an RNAs 3D structure cannot be determined experimentally, statistically derived potential energy has been used in the prediction of protein structure. In the current work, we evaluate the statistical free energy of various secondary structure motifs, including base-pair stacks, hairpin loops, and internal loops, using their statistical frequency obtained from the comparative analysis of more than 50,000 RNA sequences stored in the RNA Comparative Analysis Database (rCAD) at the Comparative RNA Web (CRW) Site. Statistical energy was computed from the structural statistics for several datasets. While the statistical energy for a base-pair stack correlates with experimentally derived free energy values, suggesting a Boltzmann-like distribution, variation is observed between different molecules and their location on the phylogenetic tree of life. Our statistical energy values calculated for several structural elements were utilized in the Mfold RNA-folding algorithm. The combined statistical energy values for base-pair stacks, hairpins and internal loop flanks result in a significant improvement in the accuracy of secondary structure prediction; the hairpin flanks contribute the most.

Ni2+-binding RNA motifs with an asymmetric purine-rich internal loop and a G-A base pair.

PubMed Central

Hofmann, H P; Limmer, S; Hornung, V; Sprinzl, M

1997-01-01

RNA molecules with high affinity for immobilized Ni2+ were isolated from an RNA pool with 50 randomized positions by in vitro selection-amplification. The selected RNAs preferentially bind Ni2+ and Co2+ over other cations from first series transition metals. Conserved structure motifs, comprising about 15 nt, were identified that are likely to represent the Ni2+ binding sites. Two conserved motifs contain an asymmetric purine-rich internal loop and probably a mismatch G-A base pair. The structure of one of these motifs was studied with proton NMR spectroscopy and formation of the G-A pair at the junction of helix and internal loop was demonstrated. Using Ni2+ as a paramagnetic probe, a divalent metal ion binding site near this G-A base pair was identified. Ni2+ ions bound to this motif exert a specific stabilization effect. We propose that small asymmetric purine-rich loops that contain a G-A interaction may represent a divalent metal ion binding site in RNA. PMID:9409620

An assessment of patient sign-outs conducted by University at Buffalo internal medicine residents.

PubMed

Wheat, Deirdre; Co, Christopher; Manochakian, Rami; Rich, Ellen

2012-01-01

Internal medicine residents were surveyed regarding patient sign-outs at shift change. Data were used to design and implement interventions aimed at improving sign-out quality. This quasi-experimental project incorporated the Plan, Do, Study, Act methodology. Residents completed an anonymous electronic survey regarding experiences during sign-outs. Survey questions assessed structure, process, and outcome of sign-outs. Analysis of qualitative and quantitative data was performed; interventions were implemented based on survey findings. A total of 120 surveys (89% response) and 115 surveys (83% response) were completed by residents of 4 postgraduate years in response to the first (2008) and second (2009) survey requests, respectively. Approximately 79% of the respondents to the second survey indicated that postintervention sign-out systems were superior to preintervention systems. Results indicated improvement in specific areas of structure, process, and outcome. Survey-based modifications to existing sign-out systems effected measurable quality improvement in structure, process, and outcome.

Building a Community of Practice for Researchers: The International Network for Simulation-Based Pediatric Innovation, Research and Education.

PubMed

Cheng, Adam; Auerbach, Marc; Calhoun, Aaron; Mackinnon, Ralph; Chang, Todd P; Nadkarni, Vinay; Hunt, Elizabeth A; Duval-Arnould, Jordan; Peiris, Nicola; Kessler, David

2018-06-01

The scope and breadth of simulation-based research is growing rapidly; however, few mechanisms exist for conducting multicenter, collaborative research. Failure to foster collaborative research efforts is a critical gap that lies in the path of advancing healthcare simulation. The 2017 Research Summit hosted by the Society for Simulation in Healthcare highlighted how simulation-based research networks can produce studies that positively impact the delivery of healthcare. In 2011, the International Network for Simulation-based Pediatric Innovation, Research and Education (INSPIRE) was formed to facilitate multicenter, collaborative simulation-based research with the aim of developing a community of practice for simulation researchers. Since its formation, the network has successfully completed and published numerous collaborative research projects. In this article, we describe INSPIRE's history, structure, and internal processes with the goal of highlighting the community of practice model for other groups seeking to form a simulation-based research network.

Pressure Oscillations and Structural Vibrations in Space Shuttle RSRM and ETM-3 Motors

NASA Technical Reports Server (NTRS)

Mason, D. R.; Morstadt, R. A.; Cannon, S. M.; Gross, E. G.; Nielsen, D. B.

2004-01-01

The complex interactions between internal motor pressure oscillations resulting from vortex shedding, the motor's internal acoustic modes, and the motor's structural vibration modes were assessed for the Space Shuttle four-segment booster Reusable Solid Rocket Motor and for the five-segment engineering test motor ETM-3. Two approaches were applied 1) a predictive procedure based on numerically solving modal representations of a solid rocket motor s acoustic equations of motion and 2) a computational fluid dynamics two-dimensional axi-symmetric large eddy simulation at discrete motor burn times.

Building International Sustainable Partnerships in Occupational Therapy: A Case Study.

PubMed

Tupe, Debra Ann; Kern, Stephen B; Salvant, Sabrina; Talero, Pamela

2015-09-01

Occupational therapy practitioners frequently identify opportunities for international practice. The World Health Organization and the World Federation of Occupational Therapists have encouraged occupational therapists to address transnational issues, social inclusion, and equal access to opportunities grounded in meaningful occupation (WFOT, 2012). This case study describes a partnership between two U.S. schools of occupational therapy and a Cuban community based pediatric clinic. It examines the dynamics that have sustained the partnership despite political, economic, and logistical barriers. The literature is scrutinized to show how this case study fits into other accounts of collaborative international partnerships. Particularly, it investigates structural and institutional conditions that shape international sustainable partnerships. In doing so, we answer the following questions: (1) Under which circumstances do international partnerships emerge and flourish? (2) What structural and institutional conditions shape international sustainable partnerships? And (3) How do partners perceive and experience the bilateral international partnership? It also discusses and illustrates the foundations and development of international partnerships that succeed. Through the use of a case study we illustrate the development of this partnership. Finally, we consider the next steps of this particular sustainable and collaborative international partnership. © 2015 John Wiley & Sons, Ltd.

Detection of internal cracks in rubber composite structures using an impact acoustic modality

NASA Astrophysics Data System (ADS)

Shen, Q.; Kurfess, T. R.; Omar, M.; Gramling, F.

2014-01-01

The objective of this study is to investigate the use of impact acoustic signals to non-intrusively inspect rubber composite structures for the presence of internal cracks, such as those found in an automobile tyre. Theoretical contact dynamic models for both integral and defective rubber structures are developed based on Hertz's impact model, further modified for rubber composite materials. The model generates the prediction of major impact dynamic quantities, namely the maximum impact force, impact duration and contact deformation; such parameters are also theoretically proven to be correlated with the presence of internal cracks. The tyre structures are simplified into cubic rubber blocks, to mitigate complexity for analytical modelling. Both impact force and impact sound signals are measured experimentally, and extraction of useful features from both signals for defect identification is achieved. The impact force produces two direct measurements of theoretical impact dynamic quantities. A good correlation between these experimental discriminators and the theoretical dynamic quantities provide validation for the contact dynamics models. Defect discriminators extracted from the impact sound are dependent on both time- and frequency-domain analyses. All the discriminators are closely connected with the theoretical dynamic quantities and experimentally verified as good indicators of internal cracks in rubber composite structures.

Photogrammetric Modeling and Image-Based Rendering for Rapid Virtual Environment Creation

DTIC Science & Technology

2004-12-01

area and different methods have been proposed. Pertinent methods include: Camera Calibration , Structure from Motion, Stereo Correspondence, and Image...Based Rendering 1.1.1 Camera Calibration Determining the 3D structure of a model from multiple views becomes simpler if the intrinsic (or internal...can introduce significant nonlinearities into the image. We have found that camera calibration is a straightforward process which can simplify the

Dispositions Supporting Elementary Interns in the Teaching of Reform-Based Science Materials

ERIC Educational Resources Information Center

Eick, Charles J.; Stewart, Bethany

2010-01-01

Dispositions supporting the teaching of science as structured inquiry by four elementary candidates are presented. Candidates were studied during student teaching based on their positive attitudes toward teaching science with reform-based materials in their methods course. Personal learning histories informed their attitudes, values, and beliefs…

Hiding the weakness: structural robustness using origami design

NASA Astrophysics Data System (ADS)

Liu, Bin; Santangelo, Christian; Cohen, Itai

2015-03-01

A non-deformable structure is typically associated with infinitely stiff materials that resist distortion. In this work, we designed a structure with a region that will not deform even though it is made of arbitrarily compliant materials. More specifically, we show that a foldable sheet with a circular hole in the middle can be deformed externally with the internal geometry of the hole unaffected. Instead of strengthening the local stiffness, we fine tune the crease patterns so that all the soft modes that can potentially deform the internal geometry are not accessible through strain on the external boundary. The inner structure is thus protected by the topological mechanics, based on the detailed geometry of how the vertices in the foldable sheet are connected. In this way, we isolate the structural robustness from the mechanical properties of the materials, which introduces an extra degree of freedom for structural design.

The Adaptation Process of International Lecturers in a South African University: The Centrality of Agency and Collegiality

ERIC Educational Resources Information Center

Jeannin, Loïse

2017-01-01

Teaching in a new country initiates a process of adaptation requiring emotional, cognitive and behavioural adjustments. This qualitative study explores international lecturers' perceptions of their adaptation process in a South African university. The findings, based on semi-structured interviews with six lecturers from six different countries,…

Global Oscillation Network Group

NASA Astrophysics Data System (ADS)

Murdin, P.

2000-11-01

The Global Oscillation Network Group (GONG) is an international, community-based project, operated by the NATIONAL SOLAR OBSERVATORY for the US National Science Foundation, to conduct a detailed study of the internal structure and dynamics of the Sun over an 11 year solar cycle using helioseismology. 10 242 velocity images are obtained by a six-station network located at Big Bear Solar Observato...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gómez, H.; Katsanevas, S.; Tonazzo, A.

One of the main concerns in archaeology is to find of a method to study precisely archaeological structures in the least invasive way possible to avoid damage. The requirement of preserving the structures integrity prevents, in the case of pyramids or tumuli, the study of any internal structure (halls or tombs) which are not reachable by existing corridors. One non-invasive method is the muon tomography. By placing a detector which allows to register the muon direction after the structure, it is possible to have an idea of its composition based on the attenuation of the muon flux, which depends onmore » the material length and density that muons have crossed. This technique, alone or together with other exploration techniques as seismic tomography or electrical resistivity tomography, can provide useful information about the internal structure of the archaeological form that can not be obtained by conventional archaeological methods. In this work, the time measurement necessary to obtain a significant result about the composition of an archaeological structure is estimated. To do that, a Monte Carlo simulation framework based on the MUSIC software, properly tuned for this study, has been developed. The particular case of the Kastas Amfipoli Macedonian tumulus has been considered to perform the simulations.« less

Linearly Adjustable International Portfolios

NASA Astrophysics Data System (ADS)

Fonseca, R. J.; Kuhn, D.; Rustem, B.

2010-09-01

We present an approach to multi-stage international portfolio optimization based on the imposition of a linear structure on the recourse decisions. Multiperiod decision problems are traditionally formulated as stochastic programs. Scenario tree based solutions however can become intractable as the number of stages increases. By restricting the space of decision policies to linear rules, we obtain a conservative tractable approximation to the original problem. Local asset prices and foreign exchange rates are modelled separately, which allows for a direct measure of their impact on the final portfolio value.

German National Proficiency Scales in Biology: Internal Structure, Relations to General Cognitive Abilities and Verbal Skills

PubMed Central

KÖLLER, OLAF

2016-01-01

ABSTRACT National and international large‐scale assessments (LSA) have a major impact on educational systems, which raises fundamental questions about the validity of the measures regarding their internal structure and their relations to relevant covariates. Given its importance, research on the validity of instruments specifically developed for LSA is still sparse, especially in science and its subdomains biology, chemistry, and physics. However, policy decisions for the improvement of educational quality based on LSA can only be helpful if valid information on students’ achievement levels is provided. In the present study, the nature of the measurement instruments based on the German Educational Standards in Biology is examined. On the basis of data from 3,165 students in Grade 10, we present dimensional analyses and report the relationship between different subdimensions of biology literacy and cognitive covariates such as general cognitive abilities and verbal skills. A theory‐driven two‐dimensional model fitted the data best. Content knowledge and scientific inquiry, two subdimensions of biology literacy, are highly correlated and show differential correlational patterns to the covariates. We argue that the underlying structure of biology should be incorporated into curricula, teacher training and future assessments. PMID:27818532

German National Proficiency Scales in Biology: Internal Structure, Relations to General Cognitive Abilities and Verbal Skills.

PubMed

Kampa, Nele; Köller, Olaf

2016-09-01

National and international large-scale assessments (LSA) have a major impact on educational systems, which raises fundamental questions about the validity of the measures regarding their internal structure and their relations to relevant covariates. Given its importance, research on the validity of instruments specifically developed for LSA is still sparse, especially in science and its subdomains biology, chemistry, and physics. However, policy decisions for the improvement of educational quality based on LSA can only be helpful if valid information on students' achievement levels is provided. In the present study, the nature of the measurement instruments based on the German Educational Standards in Biology is examined. On the basis of data from 3,165 students in Grade 10, we present dimensional analyses and report the relationship between different subdimensions of biology literacy and cognitive covariates such as general cognitive abilities and verbal skills. A theory-driven two-dimensional model fitted the data best. Content knowledge and scientific inquiry, two subdimensions of biology literacy, are highly correlated and show differential correlational patterns to the covariates. We argue that the underlying structure of biology should be incorporated into curricula, teacher training and future assessments.

Microwave Spectra and AB Initio Studies of the Ne-Acetone Complex

NASA Astrophysics Data System (ADS)

Gao, Jiao; Thomas, Javix; Xu, Yunjie; Jäger, Wolfgang

2015-06-01

Microwave spectra of the neon-acetone van der Waals complex were measured using a cavity-based molecular beam Fourier-transform microwave spectrometer in the region from 5 to 18 GHz. Both 20Ne and 22Ne containing isotopologues were studied and both c- and weaker a-type rotational transitions were observed. The transitions are split into multiplets due to the internal rotation of two methyl groups in acetone. Electronic structure calculations were done at the MP2 level of theory with the 6-311++g (2d, p) basis set for all atoms and the internal rotation barrier height of the methyl groups was determined to be about 2.8 kJ/mol. The ab initio rotational constants were the basis for our spectroscopic searches, but the multiplet structures and floppiness of the complex made the quantum number assignment very difficult. The assignment was finally achieved with the aid of constructing closed frequency loops and predicting internal rotation splittings using the XIAM code. Analyses of the spectra yielded rotational and centrifugal distortion constants, as well as internal rotation parameters, which were interpreted in terms of structure and internal dynamics of the complex. H. Hartwig and H. Dreizler, Z. Naturforsch. A 51, 923 (1996).

Nucleic Acid Database (NDB)

Science.gov Websites

the NDB archive or in the Non-Redundant list Advanced Search Search for structures based on structural features, chemical features, binding modes, citation and experimental information Featured Tools RNA 3D Motif Atlas, a representative collection of RNA 3D internal and hairpin loop motifs Non-redundant Lists

Non-Invasive Visualization and Quantitation of Cardiovascular Structure and Function.

ERIC Educational Resources Information Center

Ritman, E. L.; And Others

1979-01-01

Described is a new approach to investigative physiology based on computerized transaxial tomography, in which visualization and measurement of the internal structure of the cardiopulmonary system is possible without postmortem, biopsy, or vivisection procedures. Examples are given for application of the Dynamic Spatial Reconstructor (DSR). (CS)

The Micromorphological Research of the Internal Structure of Chairside CAD/CAM Materials by the Method of Scanning Impulse Acoustic Microscopy (SIAM)

PubMed Central

Goryainova, Kristina E.; Morokov, Egor S.; Retinskaja, Marina V.; Rusanov, Fedor S.; Apresyan, Samvel V.; Lebedenko, Igor Yu.

2018-01-01

Aim: The aim of the present work was to compare the elastic properties and internal structure of 4 different CAD/CAM chairside materials, by the method of Scanning Impulse Acoustic Microscopy (SIAM). Methods: Four chairside CAD/CAM materials with different structures from hybrid ceramic (VITA Enamic, VITA Zahnfabrik), feldspatic ceramic (VITABlocs Mark II, VITA Zahnfabrik), leucite glass-ceramic (IPS Empress CAD, Ivoclar Vivadent) and PMMA (Telio CAD, Ivoclar Vivadent) were examined by Scanning Impulse Acoustic Microscope (SIAM). Results: The results of micromorphological research of CAD/CAM chairside materials using SIAM method showed differences between the internal structures of these materials. The internal structure of feldspatic and glass-ceramic samples revealed the presence of pores with different sizes, from 10 to 100 microns; the structure of polymer materials rendered some isolated defects, while in the structure of hybrid material, defects were not found. Conclusion: Based on the results obtained from the present study, in cases of chairside production of dental crowns, it would be advisable to give preference to the blocks of hybrid ceramics. Such ceramics devoid of quite large porosity, glazing for CAD/CAM crowns made from leucite glass-ceramic and feldspatic ceramic may be an option. For these purposes, commercially available special muffle furnace for clinical and laboratory individualization and glazing of ceramic prostheses were provided. Further studies are needed to confirm the evidence emerging from the present research. PMID:29492178

Structure and functions of internal working models of attachment and their role for emotion regulation.

PubMed

Zimmermann, P

1999-12-01

The concept of organization in the service of adaptation has been applied to attachment theory (Sroufe & Waters, 1977) as well as to a variety of life sciences (Ryan, Kuhi & Deci, 1997). Internal working models (IWMs) are postulated as providing organizing structure to the attachment behavior system controlling attachment behaviors toward caregivers and, with increasing age, autonomous individual adaptation. While many theoretical specifications have been suggested on that topic (e.g. Bretherton, 1987, 1990; Bretherton & Munholland, 1999; Main, Kaplan & Cassidy, 1985; Sroufe & Fleeson, 1986), empirical studies focusing directly on the structure or functions of internal working models are rare. Knowledge about the structure and functioning of IWMs could add to the understanding of the developmental influences of the attachment organization across the life-span. In this paper two topics will be addressed shortly and related to an empirical investigation concerning the relationship between attachment representations during late adolescence and emotion regulation patterns: (1) structure and functions of IWMs in terms of information-processing and emotion and behavior regulation; and (2) the transfer from IWMs of self-with-attachment figures to adaptive personality structures based on autonomous self-regulation.

Compton imaging tomography for nondestructive evaluation of large multilayer aircraft components and structures

NASA Astrophysics Data System (ADS)

Romanov, Volodymyr; Grubsky, Victor; Zahiri, Feraidoon

2017-02-01

We present a novel NDT/NDE tool for non-contact, single-sided 3D inspection of aerospace components, based on Compton Imaging Tomography (CIT) technique, which is applicable to large, non-uniform, and/or multilayer structures made of composites or lightweight metals. CIT is based on the registration of Compton-scattered X-rays, and permits the reconstruction of the full 3D (tomographic) image of the inspected objects. Unlike conventional computerized tomography (CT), CIT requires only single-sided access to objects, and therefore can be applied to large structures without their disassembly. The developed tool provides accurate detection, identification, and precise 3D localizations and measurements of any possible internal and surface defects (corrosions, cracks, voids, delaminations, porosity, and inclusions), and also disbonds, core and skin defects, and intrusion of foreign fluids (e.g., fresh and salt water, oil) inside of honeycomb sandwich structures. The NDE capabilities of the system were successfully demonstrated on various aerospace structure samples provided by several major aerospace companies. Such a CIT-based tool can detect and localize individual internal defects with dimensions about 1-2 mm3, and honeycomb disbond defects less than 6 mm by 6 mm area with the variations in the thickness of the adhesive by 100 m. Current maximum scanning speed of aircraft/spacecraft structures is about 5-8 min/ft2 (50-80 min/m2).

The Mediating Roles of Rejection Sensitivity and Proximal Stress in the Association Between Discrimination and Internalizing Symptoms Among Sexual Minority Women.

PubMed

Dyar, Christina; Feinstein, Brian A; Eaton, Nicholas R; London, Bonita

2018-01-01

The negative impact of discrimination on mental health among lesbian, gay, and bisexual populations has been well documented. However, the possible mediating roles of sexual orientation rejection sensitivity and rejection-based proximal stress in the association between discrimination and internalizing symptoms remain unclear. Rejection-based proximal stress is a subset of proximal stressors that are theorized to arise from concerns about and expectations of sexual orientation-based rejection and discrimination. Drawing on minority stress theory, we tested potential mediating effects using indirect effects structural equation modeling in a sample of 300 sexual minority women. Results indicated that the indirect effect of discrimination on internalizing symptoms (a latent variable indicated by depression and anxiety symptoms) through sexual orientation rejection sensitivity and rejection-based proximal stress (a latent variable indicated by preoccupation with stigma, concealment motivation, and difficulty developing a positive sexual identity) was significant. Additionally, the indirect effects of discrimination on rejection-based proximal stress through sexual orientation rejection sensitivity and of sexual orientation rejection sensitivity on internalizing symptoms through rejection-based proximal stress were also significant. These findings indicate that sexual orientation rejection sensitivity plays an important role in contributing to rejection-based proximal stress and internalizing symptoms among sexual minority women.

Alternative temporal classification of long Gamma Ray Bursts

NASA Astrophysics Data System (ADS)

Alejandro Vasquez, Nicolas; Baquero, Andres; Andrade, David

2015-08-01

In order to increase the understanding on Gamma Ray Bursts, many attempts of classification have been proposed. Starting with the canonical classification into long and short GRBs, alternative classifications taking into account the cosmological origin of GRBs have been analyzed. In the present work we propose an alternative classification based on two temporal estimators, the Auto Correlation Function (ACF) of the light curves and the emission time which considered the time where the bursts engine is active. The time estimators chosen reflects the internal evolution of the GRB and the internal structure. Using a sample of 61 bright GRBs detected by SWIFT satellite with known redshift, we proposed a bimodal distribution of long bursts. The two types of bursts have different internal structure suggesting different progenitors.

Planning, creating and documenting a NASTRAN finite element model of a modern helicopter

NASA Technical Reports Server (NTRS)

Gabal, R.; Reed, D.; Ricks, R.; Kesack, W.

1985-01-01

Mathematical models based on the finite element method of structural analysis as embodied in the NASTRAN computer code are widely used by the helicopter industry to calculate static internal loads and vibration of airframe structure. The internal loads are routinely used for sizing structural members. The vibration predictions are not yet relied on during design. NASA's Langley Research Center sponsored a program to conduct an application of the finite element method with emphasis on predicting structural vibration. The Army/Boeing CH-47D helicopter was used as the modeling subject. The objective was to engender the needed trust in vibration predictions using these models and establish a body of modeling guides which would enable confident future prediction of airframe vibration as part of the regular design process.

Control performance of paper-based blood analysis devices through paper structure design.

PubMed

Li, Lizi; Huang, Xiaolei; Liu, Wen; Shen, Wei

2014-12-10

In this work, we investigated the influence of paper structure on the performance of paper-based analytical devices that are used for blood analysis. The question that we aimed to answer is how the fiber type (i.e., softwood and hardwood fibers) influences the fiber network structure of the paper, which affects the transport of red blood cells (RBCs) in paper. In the experimental design, we isolated the influence of fiber types on the paper structure from all other possible influencing factors by removing the fines from the pulps and not using any additives. Mercury porosimetry was employed to characterize the pore structures of the paper sheets. The results show that papers with a low basis weight that are made with short hardwood fibers have a higher porosity (i.e., void fraction) and simpler pore structures compared with papers made with long softwood fibers. RBC transport in paper carried by saline solution was investigated in two modes: lateral chromatographic elution and vertical flow-through. The results showed that the complexity of the paper's internal pore structure has a dominant influence on the transport of RBCs in paper. Hardwood fiber sheets with a low basis weight have a simple internal pore structure and allow for the easy transport of RBCs. Blood-typing sensors built with low basis weight hardwood fibers deliver high-clarity assays. Softwood fiber papers are found to have a more complex pore structure, which makes RBC transport more difficult, leading to blood-typing results of low clarity. This study provides the principle of paper sheet design for paper-based blood analysis sensors.

Monitoring on internal temperature of composite insulator with embedding fiber Bragg grating for early diagnosis

NASA Astrophysics Data System (ADS)

Chen, Wen; Tang, Ming

2017-04-01

The abnormal temperature rise is the precursor of the defective composite insulator in power transmission line. However no consolidated techniques or methodologies can on line monitor its internal temperature now. Thus a new method using embedding fiber Bragg grating (FBG) in fiber reinforced polymer (FRP) rod is adopted to monitor its internal temperature. To correctly demodulate the internal temperature of FRP rod from the Bragg wavelength shift of FBG, the conversion coefficient between them is deduced theoretically based on comprehensive investigation on the thermal stresses of the metal-composite joint, as well as its material and structural properties. Theoretical model shows that the conversion coefficients of FBG embedded in different positions will be different because of non-uniform thermal stress distribution, which is verified by an experiment. This work lays the theoretical foundation of monitoring the internal temperature of composite insulator with embedding FBG, which is of great importance to its health structural monitoring, especially early diagnosis.

Hierarchical Targeting Strategy for Enhanced Tumor Tissue Accumulation/Retention and Cellular Internalization.

PubMed

Wang, Sheng; Huang, Peng; Chen, Xiaoyuan

2016-09-01

Targeted delivery of therapeutic agents is an important way to improve the therapeutic index and reduce side effects. To design nanoparticles for targeted delivery, both enhanced tumor tissue accumulation/retention and enhanced cellular internalization should be considered simultaneously. So far, there have been very few nanoparticles with immutable structures that can achieve this goal efficiently. Hierarchical targeting, a novel targeting strategy based on stimuli responsiveness, shows good potential to enhance both tumor tissue accumulation/retention and cellular internalization. Here, the recent design and development of hierarchical targeting nanoplatforms, based on changeable particle sizes, switchable surface charges and activatable surface ligands, will be introduced. In general, the targeting moieties in these nanoplatforms are not activated during blood circulation for efficient tumor tissue accumulation, but re-activated by certain internal or external stimuli in the tumor microenvironment for enhanced cellular internalization. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Thermo-Elastic Analysis of Internally Cooled Structures Using a Higher Order Theory

NASA Technical Reports Server (NTRS)

Arnold, Steven M.; Bednarcyk, Brett A.; Aboudi, Jacob

2001-01-01

This paper presents the results of a study on the thermomechanical behavior of internally cooled silicon nitride structures. Silicon nitride is under consideration for elevated temperature aerospace engine applications. and techniques for lowering the operating temperature of structures composed of this material are under development. Lowering the operating temperature provides a large payoff in terms of fatigue life and may be accomplished through the use of thermal barrier coatings (TBC's) and the novel concept of included cooling channels. Herein, an in-depth study is performed on the behavior of a flame-impinged silicon nitride plate with a TBC and internal channels cooled by forced air. The analysis is performed using the higher order theory for functionally graded materials (HOTFGM), which has been developed through NASA Glenn Research Center funding over the past several years. HOTFGM was chosen over the traditional finite element approach as a prelude to an examination of functionally graded silicon nitride structures for which HOTFGM is ideally suited. To accommodate the analysis requirement% of the internally cooled plate problem, two crucial enhancements were made to the two-dimensional Cartesian-based version of HOTFGM. namely, incorporation of internal boundary capabilities and incorporation of convective boundary conditions. Results indicate the viability and large benefits of cooling the plate via forced air through cooling channels. Furthermore, cooling can positively impact the stress and displacement fields present in the plate, yielding an additional payoff in terms of fatigue life. Finally, a spin-off capability resulted from inclusion of internal boundaries within HOTFGM; the ability to simulate the thermo-elastic response of structures with curved surfaces. This new capability is demonstrated, and through comparison with an analytical solution, shown to be viable and accurate.

Reliability and Structure of the TALIS Social Desirability Scale: An Assessment Based on Item Response Theory

ERIC Educational Resources Information Center

Kapuza, A. V.; Tyumeneva, Yu. A.

2017-01-01

One of the ways of controlling for the influence of social expectations on the answers given by survey respondents is to use a social desirability scale together with the main questions. The social desirability scale, which was included in the Teaching and Learning International Survey (TALIS) international comparative study for this purpose, was…

[Clinical treatment of children and adolescents with gender dysphoria from international experts' point of view].

PubMed

Rutzen, Katharina M; Nieder, Timo Ole; Schreier, Herbert; Möller, Birgit

2014-01-01

The clinical treatment of children and adolescents with gender dysphoria is still a controversial issue. The aim of this study was to get an overview of the knowledge and experience of international experts and to highlight shared views as well as differences in theoretical convictions and treatment approaches. Half-structured, guide-line based interviews were carried out with international experts in the field. The interviews were analyzed using qualitative content analysis (Mayring, 2010).

A multi-source feedback tool for measuring a subset of Pediatrics Milestones.

PubMed

Schwartz, Alan; Margolis, Melissa J; Multerer, Sara; Haftel, Hilary M; Schumacher, Daniel J

2016-10-01

The Pediatrics Milestones Assessment Pilot employed a new multisource feedback (MSF) instrument to assess nine Pediatrics Milestones among interns and subinterns in the inpatient context. To report validity evidence for the MSF tool for informing milestone classification decisions. We obtained MSF instruments by different raters per learner per rotation. We present evidence for validity based on the unified validity framework. One hundred and ninety two interns and 41 subinterns at 18 Pediatrics residency programs received a total of 1084 MSF forms from faculty (40%), senior residents (34%), nurses (22%), and other staff (4%). Variance in ratings was associated primarily with rater (32%) and learner (22%). The milestone factor structure fit data better than simpler structures. In domains except professionalism, ratings by nurses were significantly lower than those by faculty and ratings by other staff were significantly higher. Ratings were higher when the rater observed the learner for longer periods and had a positive global opinion of the learner. Ratings of interns and subinterns did not differ, except for ratings by senior residents. MSF-based scales correlated with summative milestone scores. We obtain moderately reliable MSF ratings of interns and subinterns in the inpatient context to inform some milestone assignments.

Evaluation of fingerprint deformation using optical coherence tomography

NASA Astrophysics Data System (ADS)

Gutierrez da Costa, Henrique S.; Maxey, Jessica R.; Silva, Luciano; Ellerbee, Audrey K.

2014-02-01

Biometric identification systems have important applications to privacy and security. The most widely used of these, print identification, is based on imaging patterns present in the fingers, hands and feet that are formed by the ridges, valleys and pores of the skin. Most modern print sensors acquire images of the finger when pressed against a sensor surface. Unfortunately, this pressure may result in deformations, characterized by changes in the sizes and relative distances of the print patterns, and such changes have been shown to negatively affect the performance of fingerprint identification algorithms. Optical coherence tomography (OCT) is a novel imaging technique that is capable of imaging the subsurface of biological tissue. Hence, OCT may be used to obtain images of subdermal skin structures from which one can extract an internal fingerprint. The internal fingerprint is very similar in structure to the commonly used external fingerprint and is of increasing interest in investigations of identify fraud. We proposed and tested metrics based on measurements calculated from external and internal fingerprints to evaluate the amount of deformation of the skin. Such metrics were used to test hypotheses about the differences of deformation between the internal and external images, variations with the type of finger and location inside the fingerprint.

A computer-based information system for epilepsy and electroencephalography.

PubMed

Finnerup, N B; Fuglsang-Frederiksen, A; Røssel, P; Jennum, P

1999-08-01

This paper describes a standardised computer-based information system for electroencephalography (EEG) focusing on epilepsy. The system was developed using a prototyping approach. It is based on international recommendations for EEG examination, interpretation and terminology, international guidelines for epidemiological studies on epilepsy and classification of epileptic seizures and syndromes and international classification of diseases. It is divided into: (1) clinical information and epilepsy relevant data; and (2) EEG data, which is hierarchically structured including description and interpretation of EEG. Data is coded but is supplemented with unrestricted text. The resulting patient database can be integrated with other clinical databases and with the patient record system and may facilitate clinical and epidemiological research and development of standards and guidelines for EEG description and interpretation. The system is currently used for teleconsultation between Gentofte and Lisbon.

Explaining the trade-growth link: Assessing diffusion-based and structure-based models of exchange.

PubMed

Clark, Rob; Mahutga, Matthew C

2013-03-01

International development scholars advance contrasting theoretical explanations for the hypothesized link between trade and growth. Diffusion-based models suggest that trade with integrated partners provides states with greater access to technical knowledge. Structure-based models propose that trading with isolated partners produces a bargaining advantage. In this study, we adjudicate between these competing visions by applying Bonacich's (1987) measure of power centrality to the international trade network. We manipulate the procedure's "attenuation factor" (β) such that a state's trade centrality can be enhanced when a state is connected to either central or isolated partners. Drawing from a sample of 101 states during the 1980-2000 period, we use difference-of-logs models to assess the impact of trade centrality on economic growth net of controls. We find that the positive relationship between trade centrality and growth peaks when states trade with isolated partners in the periphery. Copyright © 2012 Elsevier Inc. All rights reserved.

Cross-Validation of the Implementation Leadership Scale (ILS) in Child Welfare Service Organizations.

PubMed

Finn, Natalie K; Torres, Elisa M; Ehrhart, Mark G; Roesch, Scott C; Aarons, Gregory A

2016-08-01

The Implementation Leadership Scale (ILS) is a brief, pragmatic, and efficient measure that can be used for research or organizational development to assess leader behaviors and actions that actively support effective implementation of evidence-based practices (EBPs). The ILS was originally validated with mental health clinicians. This study validates the ILS factor structure with providers in community-based organizations (CBOs) providing child welfare services. Participants were 214 service providers working in 12 CBOs that provide child welfare services. All participants completed the ILS, reporting on their immediate supervisor. Confirmatory factor analyses were conducted to examine the factor structure of the ILS. Internal consistency reliability and measurement invariance were also examined. Confirmatory factor analyses showed acceptable fit to the hypothesized first- and second-order factor structure. Internal consistency reliability was strong and there was partial measurement invariance for the first-order factor structure when comparing child welfare and mental health samples. The results support the use of the ILS to assess leadership for implementation of EBPs in child welfare organizations. © The Author(s) 2016.

Nonlinearity measure and internal model control based linearization in anti-windup design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perev, Kamen

2013-12-18

This paper considers the problem of internal model control based linearization in anti-windup design. The nonlinearity measure concept is used for quantifying the control system degree of nonlinearity. The linearizing effect of a modified internal model control structure is presented by comparing the nonlinearity measures of the open-loop and closed-loop systems. It is shown that the linearization properties are improved by increasing the control system local feedback gain. However, it is emphasized that at the same time the stability of the system deteriorates. The conflicting goals of stability and linearization are resolved by solving the design problem in different frequencymore » ranges.« less

A ‘frozen volume’ transition model and working mechanism for the shape memory effect in amorphous polymers

NASA Astrophysics Data System (ADS)

Lu, Haibao; Wang, Xiaodong; Yao, Yongtao; Qing Fu, Yong

2018-06-01

Phenomenological models based on frozen volume parameters could well predict shape recovery behavior of shape memory polymers (SMPs), but the physical meaning of using the frozen volume parameters to describe thermomechanical properties has not been well-established. In this study, the fundamental working mechanisms of the shape memory effect (SME) in amorphous SMPs, whose temperature-dependent viscoelastic behavior follows the Eyring equation, have been established with the considerations of both internal stress and its resulted frozen volume. The stress-strain constitutive relation was initially modeled to quantitatively describe effects of internal stresses at the macromolecular scale based on the transient network theory. A phenomenological ‘frozen volume’ model was then established to characterize the macromolecule structure and SME of amorphous SMPs based on a two-site stress-relaxation model. Effects of the internal stress, frozen volume and strain rate on shape memory behavior and thermomechanical properties of the SMP were investigated. Finally, the simulation results were compared with the experimental results reported in the literature, and good agreements between the theoretical and experimental results were achieved. The novelty and key differences of our newly proposed model with respect to the previous reports are (1). The ‘frozen volume’ in our study is caused by the internal stress and governed by the two-site model theory, thus has a good physical meaning. (2). The model can be applied to characterize and predict both the thermal and thermomechanical behaviors of SMPs based on the constitutive relationship with internal stress parameters. It is expected to provide a power tool to investigate the thermomechanical behavior of the SMPs, of which both the macromolecular structure characteristics and SME could be predicted using this ‘frozen volume’ model.

Student Satisfaction With an Innovative Internship

PubMed Central

Petrila, Ann; Fireman, Orah; Fitzpatrick, Leslie Schnoll; Hodas, Robyn Wertheimer; Taussig, Heather N.

2014-01-01

This article describes an internship program designed specifically to meet graduate students’ training needs within the context of their work in a prevention program for children in foster care. An internship based on a strong model of intern recruitment and supervision, structured inclusion of interns in a supportive agency culture, a manualized orientation, and an ongoing didactic program, was hypothesized to result in a positive experience for interns. Results of anonymous surveys administered to 102 interns over a 9-year period assessing their internship experience are presented and discussed. Recommendations are made for development of internship training sites. PMID:25642119

A novel approach to internal crown characterization for coniferous tree species classification

NASA Astrophysics Data System (ADS)

Harikumar, A.; Bovolo, F.; Bruzzone, L.

2016-10-01

The knowledge about individual trees in forest is highly beneficial in forest management. High density small foot- print multi-return airborne Light Detection and Ranging (LiDAR) data can provide a very accurate information about the structural properties of individual trees in forests. Every tree species has a unique set of crown structural characteristics that can be used for tree species classification. In this paper, we use both the internal and external crown structural information of a conifer tree crown, derived from a high density small foot-print multi-return LiDAR data acquisition for species classification. Considering the fact that branches are the major building blocks of a conifer tree crown, we obtain the internal crown structural information using a branch level analysis. The structure of each conifer branch is represented using clusters in the LiDAR point cloud. We propose the joint use of the k-means clustering and geometric shape fitting, on the LiDAR data projected onto a novel 3-dimensional space, to identify branch clusters. After mapping the identified clusters back to the original space, six internal geometric features are estimated using a branch-level analysis. The external crown characteristics are modeled by using six least correlated features based on cone fitting and convex hull. Species classification is performed using a sparse Support Vector Machines (sparse SVM) classifier.

Bright-field electron tomography of individual inorganic fullerene-like structures

NASA Astrophysics Data System (ADS)

Bar Sadan, Maya; Wolf, Sharon G.; Houben, Lothar

2010-03-01

Nanotubes and fullerene-like nanoparticles of various inorganic layered compounds have been studied extensively in recent years. Their characterisation on the atomic scale has proven essential for progress in synthesis as well as for the theoretical modelling of their physical properties. We show that with electron tomography it is possible to achieve a reliable reconstruction of the 3D structure of nested WS2 or MoS2 fullerene-like and nanotube structures with sub-nanometre resolution using electron microscopes that are not aberration-corrected. Model-based simulations were used to identify imaging parameters, under which structural features such as the shell structure can be retained in the tomogram reconstructed from bright-field micrographs. The isolation of a particle out of an agglomerate for the analysis of a single structure and its interconnection with other particles is facilitated through the tomograms. The internal structure of the layers within the particle alongside the shape and content of its internal void are reconstructed. The tomographic reconstruction yields insights regarding the growth process as well as structural defects, such as non-continuous layers, which relate to the lubrication properties.Nanotubes and fullerene-like nanoparticles of various inorganic layered compounds have been studied extensively in recent years. Their characterisation on the atomic scale has proven essential for progress in synthesis as well as for the theoretical modelling of their physical properties. We show that with electron tomography it is possible to achieve a reliable reconstruction of the 3D structure of nested WS2 or MoS2 fullerene-like and nanotube structures with sub-nanometre resolution using electron microscopes that are not aberration-corrected. Model-based simulations were used to identify imaging parameters, under which structural features such as the shell structure can be retained in the tomogram reconstructed from bright-field micrographs. The isolation of a particle out of an agglomerate for the analysis of a single structure and its interconnection with other particles is facilitated through the tomograms. The internal structure of the layers within the particle alongside the shape and content of its internal void are reconstructed. The tomographic reconstruction yields insights regarding the growth process as well as structural defects, such as non-continuous layers, which relate to the lubrication properties. Electronic supplementary information (ESI) available: Figs. S1 and S2 and movies S1-S6. See DOI: 10.1039/b9nr00251k

ROMP- and RAFT-Based Guanidinium-Containing Polymers as Scaffolds for Protein Mimic Synthesis.

PubMed

Sarapas, Joel M; Backlund, Coralie M; deRonde, Brittany M; Minter, Lisa M; Tew, Gregory N

2017-05-17

Cell-penetrating peptides are an important class of molecules with promising applications in bioactive cargo delivery. A diverse series of guanidinium-containing polymeric cell-penetrating peptide mimics (CPPMs) with varying backbone chemistries was synthesized and assessed for delivery of both GFP and fluorescently tagged siRNA. Specifically, we examined CPPMs based on norbornene, methacrylate, and styrene backbones to determine how backbone structure impacted internalization of these two cargoes. Either charge content or degree of polymerization was held constant at 20, with diguanidinium norbornene molecules being polymerized to both 10 and 20 repeat units. Generally, homopolymer CPPMs delivered low amounts of siRNA into Jurkat T cells, with no apparent backbone dependence; however, by adding a short hydrophobic methyl methacrylate block to the guanidinium-rich methacrylate polymer, siRNA delivery to nearly the entire cell population was achieved. Protein internalization yielded similar results for most of the CPPMs, though the block polymer was unable to deliver proteins. In contrast, the styrene-based CPPM yielded the highest internalization for GFP (≈40 % of cells affected), showing that indeed backbone chemistry impacts protein delivery, specifically through the incorporation of an aromatic group. These results demonstrate that an understanding of how polymer structure affects cargo-dependent internalization is critical to designing new, more effective CPPMs. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Conformable pressure vessel for high pressure gas storage

DOEpatents

Simmons, Kevin L.; Johnson, Kenneth I.; Lavender, Curt A.; Newhouse, Norman L.; Yeggy, Brian C.

2016-01-12

A non-cylindrical pressure vessel storage tank is disclosed. The storage tank includes an internal structure. The internal structure is coupled to at least one wall of the storage tank. The internal structure shapes and internally supports the storage tank. The pressure vessel storage tank has a conformability of about 0.8 to about 1.0. The internal structure can be, but is not limited to, a Schwarz-P structure, an egg-crate shaped structure, or carbon fiber ligament structure.

Bottom-up preparation and structural study of monodispersed lipid particles with internal structure

NASA Astrophysics Data System (ADS)

Kim, Hojun; Alfeche, Alana; Leal, Cecilia

Lipid based nanoparticles having internal bicontinuous cubic phases, also known as cubosomes, are becoming increasingly interesting drug delivery platforms. Compared to the liposomes, they offer an augmented surface area for drug encapsulation. However, this simple argument is insufficient to explain the cellular delivery performance of cubosomes compared to other lipid-based nanoparticles. One could argue that their topology facilitates membrane fusion and endosomal escape but at the moment the exact mechanism of cubosome cellular internalization and endosomal escape is still unknown. This is partially because the practical use of cubosomes has been limited due to hurdles of uncontrollable size and shape distributions. The conventional top-down preparation methods (sonication/homogenization) yield large and polydisperse particles. In this presentation we introduce a new system based on microfluidic devices to prepare small (200 nm) and monodisperse cubosomes with a quality not possible using conventional methods. With this approach, we successfully prepared spherical and monodisperse cubosomes (PDI: 0.01) with and without drug loading. To characterize the cubosomes and the formation mechanisms, we utilize Small Angle X-ray Scattering (SAXS) and Cryogenic TEM. We acknowledge the funding source as a NIH.

Internal rib structure can be predicted using mathematical models: An anatomic study comparing the chest to a shell dome with application to understanding fractures.

PubMed

Casha, Aaron R; Camilleri, Liberato; Manché, Alexander; Gatt, Ruben; Attard, Daphne; Gauci, Marilyn; Camilleri-Podesta, Marie-Therese; Mcdonald, Stuart; Grima, Joseph N

2015-11-01

The human rib cage resembles a masonry dome in shape. Masonry domes have a particular construction that mimics stress distribution. Rib cortical thickness and bone density were analyzed to determine whether the morphology of the rib cage is sufficiently similar to a shell dome for internal rib structure to be predicted mathematically. A finite element analysis (FEA) simulation was used to measure stresses on the internal and external surfaces of a chest-shaped dome. Inner and outer rib cortical thickness and bone density were measured in the mid-axillary lines of seven cadaveric rib cages using computerized tomography scanning. Paired t tests and Pearson correlation were used to relate cortical thickness and bone density to stress. FEA modeling showed that the stress was 82% higher on the internal than the external surface, with a gradual decrease in internal and external wall stresses from the base to the apex. The inner cortex was more radio-dense, P < 0.001, and thicker, P < 0.001, than the outer cortex. Inner cortical thickness was related to internal stress, r = 0.94, P < 0.001, inner cortical bone density to internal stress, r = 0.87, P = 0.003, and outer cortical thickness to external stress, r = 0.65, P = 0.035. Mathematical models were developed relating internal and external cortical thicknesses and bone densities to rib level. The internal anatomical features of ribs, including the inner and outer cortical thicknesses and bone densities, are similar to the stress distribution in dome-shaped structures modeled using FEA computer simulations of a thick-walled dome pressure vessel. Fixation of rib fractures should include the stronger internal cortex. © 2015 Wiley Periodicals, Inc.

Structural mapping from MSS-LANDSAT imagery: A proposed methodology for international geological correlation studies

NASA Technical Reports Server (NTRS)

Dejesusparada, N. (Principal Investigator); Crepani, E.; Martini, P. R.

1980-01-01

A methodology is proposed for international geological correlation studies based on LANDSAT-MSS imagery, Bullard's model of continental fit and compatible structural trends between Northeast Brazil and the West African counterpart. Six extensive lineaments in the Brazilian study area are mapped and discussed according to their regional behavior and in relation to the adjacent continental margin. Among the first conclusions, correlations were found between the Sobral Pedro II Lineament and the megafaults that surround the West African craton; and the Pernambuco Lineament with the Ngaurandere Linemanet in Cameroon. Ongoing research to complete the methodological stages includes the mapping of the West African structural framework, reconstruction of the pre-drift puzzle, and an analysis of the counterpart correlations.

7 CFR 226.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

.... Internal controls means the policies, procedures, and organizational structure of an institution designed... income, income shall be based on the projected annual household income. If the prior year's income... the area based on census data in which at least 50 percent of the children residing in the area are...

Internal Stress Monitoring of In-Service Structural Steel Members with Ultrasonic Method

PubMed Central

Li, Zuohua; He, Jingbo; Teng, Jun; Wang, Ying

2016-01-01

Internal stress in structural steel members is an important parameter for steel structures in their design, construction, and service stages. However, it is hard to measure via traditional approaches. Among the existing non-destructive testing (NDT) methods, the ultrasonic method has received the most research attention. Longitudinal critically refracted (Lcr) waves, which propagate parallel to the surface of the material within an effective depth, have shown great potential as an effective stress measurement approach. This paper presents a systematic non-destructive evaluation method to determine the internal stress in in-service structural steel members using Lcr waves. Based on theory of acoustoelasticity, a stress evaluation formula is derived. Factor of stress to acoustic time difference is used to describe the relationship between stress and measurable acoustic results. A testing facility is developed and used to demonstrate the performance of the proposed method. Two steel members are measured by using the proposed method and the traditional strain gauge method for verification. Parametric studies are performed on three steel members and the aluminum plate to investigate the factors that influence the testing results. The results show that the proposed method is effective and accurate for determining stress in in-service structural steel members. PMID:28773347

Internal Stress Monitoring of In-Service Structural Steel Members with Ultrasonic Method.

PubMed

Li, Zuohua; He, Jingbo; Teng, Jun; Wang, Ying

2016-03-23

Internal stress in structural steel members is an important parameter for steel structures in their design, construction, and service stages. However, it is hard to measure via traditional approaches. Among the existing non-destructive testing (NDT) methods, the ultrasonic method has received the most research attention. Longitudinal critically refracted (Lcr) waves, which propagate parallel to the surface of the material within an effective depth, have shown great potential as an effective stress measurement approach. This paper presents a systematic non-destructive evaluation method to determine the internal stress in in-service structural steel members using Lcr waves. Based on theory of acoustoelasticity, a stress evaluation formula is derived. Factor of stress to acoustic time difference is used to describe the relationship between stress and measurable acoustic results. A testing facility is developed and used to demonstrate the performance of the proposed method. Two steel members are measured by using the proposed method and the traditional strain gauge method for verification. Parametric studies are performed on three steel members and the aluminum plate to investigate the factors that influence the testing results. The results show that the proposed method is effective and accurate for determining stress in in-service structural steel members.

Optimal Hydrophobicity in Ring-Opening Metathesis Polymerization-Based Protein Mimics Required for siRNA Internalization.

PubMed

deRonde, Brittany M; Posey, Nicholas D; Otter, Ronja; Caffrey, Leah M; Minter, Lisa M; Tew, Gregory N

2016-06-13

Exploring the role of polymer structure for the internalization of biologically relevant cargo, specifically siRNA, is of critical importance to the development of improved delivery reagents. Herein, we report guanidinium-rich protein transduction domain mimics (PTDMs) based on a ring-opening metathesis polymerization scaffold containing tunable hydrophobic moieties that promote siRNA internalization. Structure-activity relationships using Jurkat T cells and HeLa cells were explored to determine how the length of the hydrophobic block and the hydrophobic side chain compositions of these PTDMs impacted siRNA internalization. To explore the hydrophobic block length, two different series of diblock copolymers were synthesized: one series with symmetric block lengths and one with asymmetric block lengths. At similar cationic block lengths, asymmetric and symmetric PTDMs promoted siRNA internalization in the same percentages of the cell population regardless of the hydrophobic block length; however, with 20 repeat units of cationic charge, the asymmetric block length had greater siRNA internalization, highlighting the nontrivial relationships between hydrophobicity and overall cationic charge. To further probe how the hydrophobic side chains impacted siRNA internalization, an additional series of asymmetric PTDMs was synthesized that featured a fixed hydrophobic block length of five repeat units that contained either dimethyl (dMe), methyl phenyl (MePh), or diphenyl (dPh) side chains and varied cationic block lengths. This series was further expanded to incorporate hydrophobic blocks consisting of diethyl (dEt), diisobutyl (diBu), and dicyclohexyl (dCy) based repeat units to better define the hydrophobic window for which our PTDMs had optimal activity. High-performance liquid chromatography retention times quantified the relative hydrophobicities of the noncationic building blocks. PTDMs containing the MePh, diBu, and dPh hydrophobic blocks were shown to have superior siRNA internalization capabilities compared to their more and less hydrophobic counterparts, demonstrating a critical window of relative hydrophobicity for optimal internalization. This better understanding of how hydrophobicity impacts PTDM-induced internalization efficiencies will help guide the development of future delivery reagents.

Size-confined fixed-composition and composition-dependent engineered band gap alloying induces different internal structures in L-cysteine-capped alloyed quaternary CdZnTeS quantum dots

NASA Astrophysics Data System (ADS)

Adegoke, Oluwasesan; Park, Enoch Y.

2016-06-01

The development of alloyed quantum dot (QD) nanocrystals with attractive optical properties for a wide array of chemical and biological applications is a growing research field. In this work, size-tunable engineered band gap composition-dependent alloying and fixed-composition alloying were employed to fabricate new L-cysteine-capped alloyed quaternary CdZnTeS QDs exhibiting different internal structures. Lattice parameters simulated based on powder X-ray diffraction (PXRD) revealed the internal structure of the composition-dependent alloyed CdxZnyTeS QDs to have a gradient nature, whereas the fixed-composition alloyed QDs exhibited a homogenous internal structure. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) analysis confirmed the size-confined nature and monodispersity of the alloyed nanocrystals. The zeta potential values were within the accepted range of colloidal stability. Circular dichroism (CD) analysis showed that the surface-capped L-cysteine ligand induced electronic and conformational chiroptical changes in the alloyed nanocrystals. The photoluminescence (PL) quantum yield (QY) values of the gradient alloyed QDs were 27-61%, whereas for the homogenous alloyed QDs, the PL QY values were spectacularly high (72-93%). Our work demonstrates that engineered fixed alloying produces homogenous QD nanocrystals with higher PL QY than composition-dependent alloying.

Defect classification in sparsity-based structural health monitoring

NASA Astrophysics Data System (ADS)

Golato, Andrew; Ahmad, Fauzia; Santhanam, Sridhar; Amin, Moeness G.

2017-05-01

Guided waves have gained popularity in structural health monitoring (SHM) due to their ability to inspect large areas with little attenuation, while providing rich interactions with defects. For thin-walled structures, the propagating waves are Lamb waves, which are a complex but well understood type of guided waves. Recent works have cast the defect localization problem of Lamb wave based SHM within the sparse reconstruction framework. These methods make use of a linear model relating the measurements with the scene reflectivity under the assumption of point-like defects. However, most structural defects are not perfect points but tend to assume specific forms, such as surface cracks or internal cracks. Knowledge of the "type" of defects is useful in the assessment phase of SHM. In this paper, we present a dual purpose sparsity-based imaging scheme which, in addition to accurately localizing defects, properly classifies the defects present simultaneously. The proposed approach takes advantage of the bias exhibited by certain types of defects toward a specific Lamb wave mode. For example, some defects strongly interact with the anti-symmetric modes, while others strongly interact with the symmetric modes. We build model based dictionaries for the fundamental symmetric and anti-symmetric wave modes, which are then utilized in unison to properly localize and classify the defects present. Simulated data of surface and internal defects in a thin Aluminum plate are used to validate the proposed scheme.

Credit BG. Interior view of Building 4316, showing internal construction ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Credit BG. Interior view of Building 4316, showing internal construction of water reservoir, roof, and monitor. View looks southeast (142°). The pipe which hangs from the roof structure and turns downward under the monitor supplies water to the reservoir; the plate suspended on chains beneath the pipe end deflects water stream so it does not erode the bottom of the reservoir. The intake pipe for the pumps is not visible in this view - Edwards Air Force Base, North Base, Deluge Water Storage Building, Near Second & D Streets, Boron, Kern County, CA

A novel method to guide classification of para swimmers with limb deficiency.

PubMed

Hogarth, Luke; Payton, Carl; Van de Vliet, Peter; Connick, Mark; Burkett, Brendan

2018-05-30

The International Paralympic Committee has directed International Federations that govern Para sports to develop evidence-based classification systems. This study defined the impact of limb deficiency impairment on 100 m freestyle performance to guide an evidence-based classification system in Para Swimming, which will be implemented following the 2020 Tokyo Paralympic games. Impairment data and competitive race performances of 90 international swimmers with limb deficiency were collected. Ensemble partial least squares regression established the relationship between relative limb length measures and competitive 100 m freestyle performance. The model explained 80% of the variance in 100 m freestyle performance, and found hand length and forearm length to be the most important predictors of performance. Based on the results of this model, Para swimmers were clustered into four-, five-, six- and seven-class structures using nonparametric kernel density estimations. The validity of these classification structures, and effectiveness against the current classification system, were examined by establishing within-class variations in 100 m freestyle performance and differences between adjacent classes. The derived classification structures were found to be more effective than current classification based on these criteria. This study provides a novel method that can be used to improve the objectivity and transparency of decision-making in Para sport classification. Expert consensus from experienced coaches, Para swimmers, classifiers and sport science and medicine personnel will benefit the translation of these findings into a revised classification system that is accepted by the Para swimming community. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Non-phase-matched enhancement of second-harmonic generation in multilayer nonlinear structures with internal reflections.

PubMed

Centini, Marco; D'Aguanno, Giuseppe; Sciscione, Letizia; Sibilia, Concita; Bertolotti, Mario; Scalora, Michael; Bloemer, Mark J

2004-08-15

Traditional notions of second-harmonic generation rely on phase matching or quasi phase matching to achieve good conversion efficiencies. We present an entirely new concept for efficient second-harmonic generation that is based on the interference of counterpropagating waves in multilayer structures. Conversion efficiencies are an order of magnitude larger than with phase-matched second-harmonic generation in similar multilayer structures.

Fast flexible modeling of RNA structure using internal coordinates.

PubMed

Flores, Samuel Coulbourn; Sherman, Michael A; Bruns, Christopher M; Eastman, Peter; Altman, Russ Biagio

2011-01-01

Modeling the structure and dynamics of large macromolecules remains a critical challenge. Molecular dynamics (MD) simulations are expensive because they model every atom independently, and are difficult to combine with experimentally derived knowledge. Assembly of molecules using fragments from libraries relies on the database of known structures and thus may not work for novel motifs. Coarse-grained modeling methods have yielded good results on large molecules but can suffer from difficulties in creating more detailed full atomic realizations. There is therefore a need for molecular modeling algorithms that remain chemically accurate and economical for large molecules, do not rely on fragment libraries, and can incorporate experimental information. RNABuilder works in the internal coordinate space of dihedral angles and thus has time requirements proportional to the number of moving parts rather than the number of atoms. It provides accurate physics-based response to applied forces, but also allows user-specified forces for incorporating experimental information. A particular strength of RNABuilder is that all Leontis-Westhof basepairs can be specified as primitives by the user to be satisfied during model construction. We apply RNABuilder to predict the structure of an RNA molecule with 160 bases from its secondary structure, as well as experimental information. Our model matches the known structure to 10.2 Angstroms RMSD and has low computational expense.

Experimental study and numerical simulation on the structural and mechanical properties of Typha leaves through multimodal microscopy approaches.

PubMed

Liu, Jingjing; Zhang, Zhihui; Yu, Zhenglei; Liang, Yunhong; Li, Xiujuan; Ren, Luquan

2018-01-01

The Typha leaf, with special multi-level structure, low density and excellent mechanical properties, is an ideal bionic prototype utilized for lightweight design. In order to further study the relationship between the structure and mechanical properties, the three-dimensional macroscopic morphology of Typha leaves was characterized by micro computed tomography (Micro-CT) and its internal microstructure was observed by scanning electron microscopy (SEM). The combination of experimental and computational research was carried out in this paper, to reveal and verify the effect of multi-level structure on the mechanical properties. A universal testing machine and a self-developed mechanical testing apparatus with high precision and low load were used to measure the mechanical properties of the axial compression and lateral bending of the leaves, respectively. Three models with different internal structures were established based on the above-mentioned three-dimensional morphologies. The result demonstrated that the structure of partitions and diaphragms within the Typha leaf could form a reinforcement ribs structure which could provide multiple load paths and make the process of compression and bending difficult. The further nonlinear finite element analysis through LS-DYNA proved that internal structure could improve the ability of the models to resist compression and deformation. The investigation can be the reference for lightweight thin-walled structure design and inspire the application of the bionic structural materials. Copyright © 2017 Elsevier Ltd. All rights reserved.

HCIV-1 and Other Tailless Icosahedral Internal Membrane-Containing Viruses of the Family Sphaerolipoviridae.

PubMed

Demina, Tatiana A; Pietilä, Maija K; Svirskaitė, Julija; Ravantti, Janne J; Atanasova, Nina S; Bamford, Dennis H; Oksanen, Hanna M

2017-02-18

Members of the virus family Sphaerolipoviridae include both archaeal viruses and bacteriophages that possess a tailless icosahedral capsid with an internal membrane. The genera Alpha- and Betasphaerolipovirus comprise viruses that infect halophilic euryarchaea, whereas viruses of thermophilic Thermus bacteria belong to the genus Gammasphaerolipovirus . Both sequence-based and structural clustering of the major capsid proteins and ATPases of sphaerolipoviruses yield three distinct clades corresponding to these three genera. Conserved virion architectural principles observed in sphaerolipoviruses suggest that these viruses belong to the PRD1-adenovirus structural lineage. Here we focus on archaeal alphasphaerolipoviruses and their related putative proviruses. The highest sequence similarities among alphasphaerolipoviruses are observed in the core structural elements of their virions: the two major capsid proteins, the major membrane protein, and a putative packaging ATPase. A recently described tailless icosahedral haloarchaeal virus, Haloarcula californiae icosahedral virus 1 (HCIV-1), has a double-stranded DNA genome and an internal membrane lining the capsid. HCIV-1 shares significant similarities with the other tailless icosahedral internal membrane-containing haloarchaeal viruses of the family Sphaerolipoviridae . The proposal to include a new virus species, Haloarcula virus HCIV1 , into the genus Alphasphaerolipovirus was submitted to the International Committee on Taxonomy of Viruses (ICTV) in 2016.

Mentoring to Promote Courage and Confidence among Elementary School Students with Internalizing Problems: A Single-Case Design Pilot Study

ERIC Educational Resources Information Center

Fiat, Aria E.; Cook, Clayton R.; Zhang, Yanchen; Renshaw, Tyler L.; DeCano, Polocarpio; Merrick, Jillian S.

2017-01-01

There is a paucity of selective, Tier 2 interventions that educators can implement for students with internalizing problems as part of their schools' Multi-Tiered Systems of Supports. To fill this void, the authors' purpose was to evaluate the efficacy, acceptability, and integrity of a structured school-based mentoring program, the Courage and…

Using Target Network Modelling to Increase Battlespace Agility

DTIC Science & Technology

2013-06-01

Moffat, James. (2003) Complexity Theory and Network Centric Warfare. Washington DC: CCRP Moore, David T.. Sensemaking : A Structure for an Intelligence...Ted Hopf’s “Promise of Constructivism in International Relations Theory ” presented in International Security in 1998; and Adler 1998. 5 Look to...of warfighting within a doctrinal framework. Based on 10 years of research12 informed by social theory , experimentation, NATO doctrinal studies and

Forced unfolding of single-chain polymeric nanoparticles.

PubMed

Hosono, Nobuhiko; Kushner, Aaron M; Chung, Jaeyoon; Palmans, Anja R A; Guan, Zhibin; Meijer, E W

2015-06-03

Atomic force microscopy (AFM)-based single-molecule force spectroscopy (SMFS) is applied to single-chain polymeric nanoparticles (SCPNs) to acquire information about the internal folding structure of SCPNs and inherent kinetic parameters of supramolecular self-assembling motifs embedded into the SCPNs. The SCPNs used here are polyacrylate-based polymers carrying 2-ureido-4-[1H]-pyrimidinone (UPy) or benzene-1,3,5-tricarboxamide (BTA) pendants that induce an intramolecular chain collapse into nanoparticles consisting of one polymer chain only via internal supramolecular cross-linking. The SCPN is stretched by an AFM cantilever to unfold mechanically, which allows measuring of force-extension profiles of the SCPNs. Consecutive peaks observed in the force profiles are attributed to rupture events of self-assembled UPy/BTA units in the SCPNs. The force profiles have been analyzed statistically for a series of polymers with different UPy/BTA incorporation densities. The results provide insights into the internal conformation of SCPNs, where the folding structure can be changed with the incorporation density of UPy/BTA. In addition, dynamic loading rate analysis allows the determination of kinetic parameters of BTA self-assembly, which has not been accessible by any other method. This study offers a rational tool for understanding the folding structure, kinetics, and pathway of two series of SCPNs.

Internal Communication Study. 1974-75 Evaluation Report.

ERIC Educational Resources Information Center

Austin Independent School District, TX. Office of Research and Evaluation.

This report attempts to identify some communication problem areas in the Austin Independent School District, based on an open-ended interview questionnaire and a network analysis. Guidelines based on a review of the literature are included for communicators at all levels of the organizational structure. Backup summaries of that review are also…

CattleTickBase: An integrated Internet-based bioinformatics resource for Rhipicephalus (Boophilus) microplus

USDA-ARS?s Scientific Manuscript database

The Rhipicephalus microplus genome is large and complex in structure, making a genome sequence difficult to assemble and costly to resource the required bioinformatics. In light of this, a consortium of international collaborators was formed to pool resources to begin sequencing this genome. We have...

Modeling and Reconstruction of Micro-structured 3D Chitosan/Gelatin Porous Scaffolds Using Micro-CT

NASA Astrophysics Data System (ADS)

Gong, Haibo; Li, Dichen; He, Jiankang; Liu, Yaxiong; Lian, Qin; Zhao, Jinna

2008-09-01

Three dimensional (3D) channel networks are the key to promise the uniform distribution of nutrients inside 3D hepatic tissue engineering scaffolds and prompt elimination of metabolic products out of the scaffolds. 3D chitosan/gelatin porous scaffolds with predefined internal channels were fabricated and a combination of light microscope, laser confocal microscopy and micro-CT were employed to characterize the structure of porous scaffolds. In order to evaluate the flow field distribution inside the micro-structured 3D scaffolds, a computer reconstructing method based on Micro-CT was proposed. According to this evaluating method, a contrast between 3D porous scaffolds with and without predefined internal channels was also performed to assess scaffolds' fluid characters. Results showed that the internal channel of the 3D scaffolds formed the 3D fluid channel network; the uniformity of flow field distribution of the scaffolds fabricated in this paper was better than the simple porous scaffold without micro-fluid channels.

Validation of In utero Tractography of Human Fetal Commissural and Internal Capsule Fibers with Histological Structure Tensor Analysis

PubMed Central

Mitter, Christian; Jakab, András; Brugger, Peter C.; Ricken, Gerda; Gruber, Gerlinde M.; Bettelheim, Dieter; Scharrer, Anke; Langs, Georg; Hainfellner, Johannes A.; Prayer, Daniela; Kasprian, Gregor

2015-01-01

Diffusion tensor imaging (DTI) and tractography offer the unique possibility to visualize the developing white matter macroanatomy of the human fetal brain in vivo and in utero and are currently under investigation for their potential use in the diagnosis of developmental pathologies of the human central nervous system. However, in order to establish in utero DTI as a clinical imaging tool, an independent comparison between macroscopic imaging and microscopic histology data in the same subject is needed. The present study aimed to cross-validate normal as well as abnormal in utero tractography results of commissural and internal capsule fibers in human fetal brains using postmortem histological structure tensor (ST) analysis. In utero tractography findings from two structurally unremarkable and five abnormal fetal brains were compared to the results of postmortem ST analysis applied to digitalized whole hemisphere sections of the same subjects. An approach to perform ST-based deterministic tractography in histological sections was implemented to overcome limitations in correlating in utero tractography to postmortem histology data. ST analysis and histology-based tractography of fetal brain sections enabled the direct assessment of the anisotropic organization and main fiber orientation of fetal telencephalic layers on a micro- and macroscopic scale, and validated in utero tractography results of corpus callosum and internal capsule fiber tracts. Cross-validation of abnormal in utero tractography results could be achieved in four subjects with agenesis of the corpus callosum (ACC) and in two cases with malformations of internal capsule fibers. In addition, potential limitations of current DTI-based in utero tractography could be demonstrated in several brain regions. Combining the three-dimensional nature of DTI-based in utero tractography with the microscopic resolution provided by histological ST analysis may ultimately facilitate a more complete morphologic characterization of axon guidance disorders at prenatal stages of human brain development. PMID:26732460

Protein Structure and Function: An Interdisciplinary Multimedia-Based Guided-Inquiry Education Module for the High School Science Classroom

ERIC Educational Resources Information Center

Bethel, Casey M.; Lieberman, Raquel L.

2014-01-01

Here we present a multidisciplinary educational unit intended for general, advanced placement, or international baccalaureate-level high school science, focused on the three-dimensional structure of proteins and their connection to function and disease. The lessons are designed within the framework of the Next Generation Science Standards to make…

ENGLISH ORTHOGRAPHY--ITS GRAPHICAL STRUCTURE AND ITS RELATION TO SOUND.

ERIC Educational Resources Information Center

VENEZKY, RICHARD L.

SETS OF ORTHOGRAPHIC PATTERNS BASED ON AN ANALYSIS OF THE SPELLINGS AND PRONUNCIATIONS OF THE 20,000 MOST COMMON ENGLISH WORDS ARE ORGANIZED AND PRESENTED. TWO BASIC SETS OF PATTERNS ARE DISCUSSED. THE FIRST PERTAINS TO THE INTERNAL STRUCTURE OF THE ORTHOGRAPHY--THE CLASSES OF LETTERS (GRAPHEMES) AND THE ALLOWABLE SEQUENCES OF THESE LETTERS…

Reducing youth internalizing symptoms: Effects of a family-based preventive intervention on parental guilt induction and youth cognitive style

PubMed Central

McKEE, LAURA G.; PARENT, JUSTIN; FOREHAND, REX; RAKOW, AARON; WATSON, KELLY H.; DUNBAR, JENNIFER P.; REISING, MICHELLE M.; HARDCASTLE, EMILY; COMPAS, BRUCE E.

2014-01-01

This study utilized structural equation modeling to examine the associations among parental guilt induction (a form of psychological control), youth cognitive style, and youth internalizing symptoms, with parents and youth participating in a randomized controlled trial of a family-based group cognitive–behavioral preventive intervention targeting families with a history of caregiver depression. The authors present separate models utilizing parent report and youth report of internalizing symptoms. Findings suggest that families in the active condition (family-based group cognitive–behavioral group) relative to the comparison condition showed a significant decline in parent use of guilt induction at the conclusion of the intervention (6 months postbaseline). Furthermore, reductions in parental guilt induction at 6 months were associated with significantly lower levels of youth negative cognitive style at 12 months. Finally, reductions in parental use of guilt induction were associated with lower youth internalizing symptoms 1 year following the conclusion of the intervention (18 months postbaseline). PMID:24438999

Acculturative Stress and Influential Factors among International Students in China: A Structural Dynamic Perspective

PubMed Central

Li, Shiyue; Liu, Yang; Jacques-Tiura, Angela J.; Yan, Hong

2014-01-01

Stress represents a prominent aspect of modern life and is associated with numerous negative health consequences. International students are a key force in shaping globalization. However, these students often experience acculturative stress, influencing their health and well-being. The growing number of international students in China emerges as a new global health challenge and presents an opportunity to advance our understanding of acculturative stress. This study aims to investigate the acculturative stress of international students in China, and verify the mechanism and influential factors of acculturative stress. We analyzed survey data from 567 international students attending universities in Wuhan, China. We used a network-based analytical approach to assess the structure of the Acculturative Stress Scale for International Students and used regression analysis to assess the relationships between acculturative stress and theoretically related factors. We found that higher levels of acculturative stress were reported by students from Asia and Africa than from other regions (Europe/America/Oceania). Lower acculturative stress was reported by unmarried students than others and by students well prepared than not well prepared. We verified seven acculturative stress subconstructs: rejection, identity threat, opportunity deprivation, self-confidence, value conflict, cultural competence, and homesickness; and discovered a three-dimensional network structure of these subconstructs. Our results suggest that acculturative stress was more common among international students in China than in developed countries. Acculturative stress was also more common among international students who did not well prepared, married, and belonged to an organized religion. African and Asian students' stress was higher than that for students from other regions. Acculturative stress prevention programs should seek to improve preparedness of the international students for studying abroad and pay extra attention to the high risk subgroups. PMID:24788357

Acculturative stress and influential factors among international students in China: a structural dynamic perspective.

PubMed

Yu, Bin; Chen, Xinguang; Li, Shiyue; Liu, Yang; Jacques-Tiura, Angela J; Yan, Hong

2014-01-01

Stress represents a prominent aspect of modern life and is associated with numerous negative health consequences. International students are a key force in shaping globalization. However, these students often experience acculturative stress, influencing their health and well-being. The growing number of international students in China emerges as a new global health challenge and presents an opportunity to advance our understanding of acculturative stress. This study aims to investigate the acculturative stress of international students in China, and verify the mechanism and influential factors of acculturative stress. We analyzed survey data from 567 international students attending universities in Wuhan, China. We used a network-based analytical approach to assess the structure of the Acculturative Stress Scale for International Students and used regression analysis to assess the relationships between acculturative stress and theoretically related factors. We found that higher levels of acculturative stress were reported by students from Asia and Africa than from other regions (Europe/America/Oceania). Lower acculturative stress was reported by unmarried students than others and by students well prepared than not well prepared. We verified seven acculturative stress subconstructs: rejection, identity threat, opportunity deprivation, self-confidence, value conflict, cultural competence, and homesickness; and discovered a three-dimensional network structure of these subconstructs. Our results suggest that acculturative stress was more common among international students in China than in developed countries. Acculturative stress was also more common among international students who did not well prepared, married, and belonged to an organized religion. African and Asian students' stress was higher than that for students from other regions. Acculturative stress prevention programs should seek to improve preparedness of the international students for studying abroad and pay extra attention to the high risk subgroups.

Internal filament modulation in low-dielectric gap design for built-in selector-less resistive switching memory application

NASA Astrophysics Data System (ADS)

Chen, Ying-Chen; Lin, Chih-Yang; Huang, Hui-Chun; Kim, Sungjun; Fowler, Burt; Chang, Yao-Feng; Wu, Xiaohan; Xu, Gaobo; Chang, Ting-Chang; Lee, Jack C.

2018-02-01

Sneak path current is a severe hindrance for the application of high-density resistive random-access memory (RRAM) array designs. In this work, we demonstrate nonlinear (NL) resistive switching characteristics of a HfO x /SiO x -based stacking structure as a realization for selector-less RRAM devices. The NL characteristic was obtained and designed by optimizing the internal filament location with a low effective dielectric constant in the HfO x /SiO x structure. The stacking HfO x /SiO x -based RRAM device as the one-resistor-only memory cell is applicable without needing an additional selector device to solve the sneak path issue with a switching voltage of ~1 V, which is desirable for low-power operating in built-in nonlinearity crossbar array configurations.

Nondestructive Evaluation of Advanced Materials with X-ray Phase Mapping

NASA Technical Reports Server (NTRS)

Hu, Zhengwei

2005-01-01

X-ray radiation has been widely used for imaging applications since Rontgen first discovered X-rays over a century ago. Its large penetration depth makes it ideal for the nondestructive visualization of the internal structure and/or defects of materials unobtainable otherwise. Currently used nondestructive evaluation (NDE) tools, X-ray radiography and tomography, are absorption-based, and work well in heavy-element materials where density or composition variations due to internal structure or defects are high enough to produce appreciable absorption contrast. However, in many cases where materials are light-weight and/or composites that have similar mass absorption coefficients, the conventional absorption-based X-ray methods for NDE become less useful. Indeed, the light-weight and ultra-high-strength requirements for the most advanced materials used or developed for current flight mission and future space exploration pose a great challenge to the standard NDE tools in that the absorption contrast arising from the internal structure of these materials is often too weak to be resolved. In this presentation, a solution to the problem, the use of phase information of X-rays for phase contrast X-ray imaging, will be discussed, along with a comparison between the absorption-based and phase-contrast imaging methods. Latest results on phase contrast X-ray imaging of lightweight Space Shuttle foam in 2D and 3D will be presented, demonstrating new opportunities to solve the challenging issues encountered in advanced materials development and processing.

Structure refinement of membrane proteins via molecular dynamics simulations.

PubMed

Dutagaci, Bercem; Heo, Lim; Feig, Michael

2018-07-01

A refinement protocol based on physics-based techniques established for water soluble proteins is tested for membrane protein structures. Initial structures were generated by homology modeling and sampled via molecular dynamics simulations in explicit lipid bilayer and aqueous solvent systems. Snapshots from the simulations were selected based on scoring with either knowledge-based or implicit membrane-based scoring functions and averaged to obtain refined models. The protocol resulted in consistent and significant refinement of the membrane protein structures similar to the performance of refinement methods for soluble proteins. Refinement success was similar between sampling in the presence of lipid bilayers and aqueous solvent but the presence of lipid bilayers may benefit the improvement of lipid-facing residues. Scoring with knowledge-based functions (DFIRE and RWplus) was found to be as good as scoring using implicit membrane-based scoring functions suggesting that differences in internal packing is more important than orientations relative to the membrane during the refinement of membrane protein homology models. © 2018 Wiley Periodicals, Inc.

Bright-field electron tomography of individual inorganic fullerene-like structures.

PubMed

Bar Sadan, Maya; Wolf, Sharon G; Houben, Lothar

2010-03-01

Nanotubes and fullerene-like nanoparticles of various inorganic layered compounds have been studied extensively in recent years. Their characterisation on the atomic scale has proven essential for progress in synthesis as well as for the theoretical modelling of their physical properties. We show that with electron tomography it is possible to achieve a reliable reconstruction of the 3D structure of nested WS(2) or MoS(2) fullerene-like and nanotube structures with sub-nanometre resolution using electron microscopes that are not aberration-corrected. Model-based simulations were used to identify imaging parameters, under which structural features such as the shell structure can be retained in the tomogram reconstructed from bright-field micrographs. The isolation of a particle out of an agglomerate for the analysis of a single structure and its interconnection with other particles is facilitated through the tomograms. The internal structure of the layers within the particle alongside the shape and content of its internal void are reconstructed. The tomographic reconstruction yields insights regarding the growth process as well as structural defects, such as non-continuous layers, which relate to the lubrication properties.

Benefits and challenges of international clinical education from a US-based physiotherapist faculty perspective.

PubMed

Pechak, Celia; Black, Jill D

2013-12-01

The influence of internationalization on physiotherapist education in at least North American-based programmes has become more apparent. Faculty and students have been involved in various international activities. One category of activities includes international clinical education (ICE), where students earn clinical education credit for their learning activities at international sites. Although this educational strategy appears to be increasingly used in at least the United States and Canada, the related literature is limited in scope. The purpose of this portion of the present study was to investigate the benefits and challenges of ICE for US-based students, US-based physiotherapy programmes and international partners from the perspective of US-based faculty sending students for clinical education internationally. Content analysis was used for this qualitative study. Fifteen US-based faculty members who had experience in sending physiotherapist students for ICE were recruited. The primary researcher conducted semi-structured phone interviews, averaging approximately 60 minutes in length. The primary and secondary researchers completed data analysis using NVivo 8 software (QSR International Inc., Cambridge, MA). Benefits of ICE to the students included exposure to alternate health systems, broadening of student perspectives and clinical competence. Challenges consisted of funding and possible language barrier. Increased visibility, expanded global perspective and faculty collaborations were benefits to the programme. Ensuring a quality learning experience was the greatest programme challenge. Benefits to the international site included education and faculty collaborations/exchanges; challenges were language, student clinical preparation and unfamiliarity with the student evaluation tool. Because the sample was limited to 15 US-based faculty members, the results may not be relevant to all programmes inside or outside of the United States. Additionally, the study lacked perspectives from the students or international sites. The present study is an early step in the important examination of the impact of this emerging educational trend on physiotherapy education and practice. Copyright © 2013 John Wiley & Sons, Ltd.

Automated extraction of knowledge for model-based diagnostics

NASA Technical Reports Server (NTRS)

Gonzalez, Avelino J.; Myler, Harley R.; Towhidnejad, Massood; Mckenzie, Frederic D.; Kladke, Robin R.

1990-01-01

The concept of accessing computer aided design (CAD) design databases and extracting a process model automatically is investigated as a possible source for the generation of knowledge bases for model-based reasoning systems. The resulting system, referred to as automated knowledge generation (AKG), uses an object-oriented programming structure and constraint techniques as well as internal database of component descriptions to generate a frame-based structure that describes the model. The procedure has been designed to be general enough to be easily coupled to CAD systems that feature a database capable of providing label and connectivity data from the drawn system. The AKG system is capable of defining knowledge bases in formats required by various model-based reasoning tools.

Assessing a Norwegian translation of the Organizational Climate Measure.

PubMed

Bernstrøm, Vilde Hoff; Lone, Jon Anders; Bjørkli, Cato A; Ulleberg, Pål; Hoff, Thomas

2013-04-01

This study investigated the Norwegian translation of the Organizational Climate Measure developed by Patterson and colleagues. The Organizational Climate Measure is a global measure of organizational climate based on Quinn and Rohrbaugh's competing values model. The survey was administered to a Norwegian branch of an international service sector company (N = 555). The results revealed satisfactory internal reliability and interrater agreement for the 17 scales, and confirmatory factor analysis supported the original factor structure. The findings gave preliminary support for the Organizational Climate Measure as a reliable measure with a stable factor structure, and indicated that it is potentially useful in the Norwegian context.

Effect of Early Adversity and Childhood Internalizing Symptoms on Brain Structure in Young Men.

PubMed

Jensen, Sarah K G; Dickie, Erin W; Schwartz, Deborah H; Evans, C John; Dumontheil, Iroise; Paus, Tomáš; Barker, Edward D

2015-10-01

Early adversity is an important risk factor that relates to internalizing symptoms and altered brain structure. To assess the direct effects of early adversity and child internalizing symptoms (ie, depression, anxiety) on cortical gray matter (GM) volume, as well as the extent to which early adversity associates with variation in cortical GM volume indirectly via increased levels of internalizing symptoms. A prospective investigation of associations between adversity within the first 6 years of life, internalizing symptoms during childhood and early adolescence, and altered brain structure in late adolescence (age, 18-21 years) was conducted in a community-based birth cohort in England (Avon Longitudinal Study of Parents and Children). Participants from the cohort included 494 mother-son pairs monitored since the mothers were pregnant (estimated date of delivery between April 1, 1991, and December 31, 1992). Data collection for the present study was conducted between April 1, 1991, and November 30, 2010; the neuroimaging data were collected between September 1, 2010, and November 30, 2012, and data analyses for the present study occurred between January 25, 2013, and February 15, 2015. Risk factors were adversity within the first 6 years of the child's life (including prenatal exposure) and the child's internalizing symptoms between age 7 and 13 years. Early childhood adversity. The main outcome was GM volume of cortical regions previously associated with major depression measured through T1-weighted magnetic resonance images collected in late adolescence. Among 494 young men included in this analysis, early adversity was directly associated with lower GM volumes in the anterior cingulate cortex (β = -.18; P = .01) and higher GM volume in the precuneus (β = .18; P = .009). Childhood internalizing symptoms were associated with lower GM volume in the right superior frontal gyrus (β = -.20; P = .002). Early adversity was also associated with higher levels of internalizing symptoms (β = .37; P < .001), which, in turn, were associated with lower superior frontal gyrus volume (ie, an indirect effect) (β = -.08; 95% CI, -0.14 to -0.01; P = .02). Adversity early in life was associated with higher levels of internalizing symptoms as well as with altered brain structure. Early adversity was related to variation in brain structure both directly and via increased levels of internalizing symptoms. These findings may suggest that some of the structural variation often attributed to depression might be associated with early adversity in addition to the effect of depression.

The research and development of the non-contact detection of the tubing internal thread with a line structured light

NASA Astrophysics Data System (ADS)

Hu, Yuanyuan; Xu, Yingying; Hao, Qun; Hu, Yao

2013-12-01

The tubing internal thread plays an irreplaceable role in the petroleum equipment. The unqualified tubing can directly lead to leakage, slippage and bring huge losses for oil industry. For the purpose of improving efficiency and precision of tubing internal thread detection, we develop a new non-contact tubing internal thread measurement system based on the laser triangulation principle. Firstly, considering that the tubing thread had a small diameter and relatively smooth surface, we built a set of optical system with a line structured light to irradiate the internal thread surface and obtain an image which contains the internal thread profile information through photoelectric sensor. Secondly, image processing techniques were used to do the edge detection of the internal thread from the obtained image. One key method was the sub-pixel technique which greatly improved the detection accuracy under the same hardware conditions. Finally, we restored the real internal thread contour information on the basis of laser triangulation method and calculated tubing thread parameters such as the pitch, taper and tooth type angle. In this system, the profile of several thread teeth can be obtained at the same time. Compared with other existing scanning methods using point light and stepper motor, this system greatly improves the detection efficiency. Experiment results indicate that this system can achieve the high precision and non-contact measurement of the tubing internal thread.

Structure-based predictions of 13C-NMR chemical shifts for a series of 2-functionalized 5-(methylsulfonyl)-1-phenyl-1H-indoles derivatives using GA-based MLR method

NASA Astrophysics Data System (ADS)

Ghavami, Raouf; Sadeghi, Faridoon; Rasouli, Zolikha; Djannati, Farhad

2012-12-01

Experimental values for the 13C NMR chemical shifts (ppm, TMS = 0) at 300 K ranging from 96.28 ppm (C4' of indole derivative 17) to 159.93 ppm (C4' of indole derivative 23) relative to deuteride chloroform (CDCl3, 77.0 ppm) or dimethylsulfoxide (DMSO, 39.50 ppm) as internal reference in CDCl3 or DMSO-d6 solutions have been collected from literature for thirty 2-functionalized 5-(methylsulfonyl)-1-phenyl-1H-indole derivatives containing different substituted groups. An effective quantitative structure-property relationship (QSPR) models were built using hybrid method combining genetic algorithm (GA) based on stepwise selection multiple linear regression (SWS-MLR) as feature-selection tools and correlation models between each carbon atom of indole derivative and calculated descriptors. Each compound was depicted by molecular structural descriptors that encode constitutional, topological, geometrical, electrostatic, and quantum chemical features. The accuracy of all developed models were confirmed using different types of internal and external procedures and various statistical tests. Furthermore, the domain of applicability for each model which indicates the area of reliable predictions was defined.

46 CFR 176.610 - Scope of drydock and internal structural examinations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Scope of drydock and internal structural examinations....610 Scope of drydock and internal structural examinations. (a) A drydock examination conducted in... required to be pulled for examination. (b) An internal structural examination conducted in compliance with...

Global Electricity Trade Network: Structures and Implications

PubMed Central

Ji, Ling; Jia, Xiaoping; Chiu, Anthony S. F.; Xu, Ming

2016-01-01

Nations increasingly trade electricity, and understanding the structure of the global power grid can help identify nations that are critical for its reliability. This study examines the global grid as a network with nations as nodes and international electricity trade as links. We analyze the structure of the global electricity trade network and find that the network consists of four sub-networks, and provide a detailed analysis of the largest network, Eurasia. Russia, China, Ukraine, and Azerbaijan have high betweenness measures in the Eurasian sub-network, indicating the degrees of centrality of the positions they hold. The analysis reveals that the Eurasian sub-network consists of seven communities based on the network structure. We find that the communities do not fully align with geographical proximity, and that the present international electricity trade in the Eurasian sub-network causes an approximately 11 million additional tons of CO2 emissions. PMID:27504825

Global Electricity Trade Network: Structures and Implications.

PubMed

Ji, Ling; Jia, Xiaoping; Chiu, Anthony S F; Xu, Ming

2016-01-01

Nations increasingly trade electricity, and understanding the structure of the global power grid can help identify nations that are critical for its reliability. This study examines the global grid as a network with nations as nodes and international electricity trade as links. We analyze the structure of the global electricity trade network and find that the network consists of four sub-networks, and provide a detailed analysis of the largest network, Eurasia. Russia, China, Ukraine, and Azerbaijan have high betweenness measures in the Eurasian sub-network, indicating the degrees of centrality of the positions they hold. The analysis reveals that the Eurasian sub-network consists of seven communities based on the network structure. We find that the communities do not fully align with geographical proximity, and that the present international electricity trade in the Eurasian sub-network causes an approximately 11 million additional tons of CO2 emissions.

Plate Deformation Behavior of Polymer Matrix Composite-Ti Honeycomb-Metal Sandwiches for Pressurized Propulsion Component Applications

NASA Technical Reports Server (NTRS)

Bertelsen, William D.; Shin, E. eugene; Thesken, John C.; Sutter, James K.; Martin, Rich

2004-01-01

THe objectives are: 1. To experimentally validate bi-axial plate flexural performance of PMC-Ti H/C-A286 sandwich panels for the internally pressurized RBCC combustion chamber support structure. 2. To explore ASTM 2-D plate flexure test (D 6416) to simulate the internal pressure loading and to correlate the results with analytical and FE modeling based on 2-D flexure properties.

An RNA internal loop acts as a hinge to facilitate ribozyme folding and catalysis.

PubMed Central

Szewczak, A A; Cech, T R

1997-01-01

RNA molecules commonly consist of helical regions separated by internal loops, and in many cases these internal loops have been found to assume stable structures. We have examined the function and dynamics of an internal loop, J5/5a, that joins the two halves of the P4-P6 domain of the Tetrahymena self-splicing group I intron. P4-P6 RNAs with mutations in the J5/5a region showed nondenaturing gel electrophoretic mobilities and levels of Fe(II)-EDTA cleavage protection intermediate between those of wild-type RNA and a mutant incapable of folding into the native P4-P6 tertiary structure. Mutants with the least structured J5/5a loops behaved the most like wild-type P4-P6, and required smaller amounts of Mg2+ to rescue folding. The activity of reconstituted introns containing mutant P4-P6 RNAs correlated similarly with the nature of the J5/5a mutation. Our results suggest that, in solution, the P4-P6 RNA is in a two-state equilibrium between folded and unfolded states. We conclude that this internal loop mainly acts as a flexible hinge, allowing the coaxially stacked helical regions on either side of it to interact via specific tertiary contacts. To a lesser extent, the specific bases within the loop contribute to folding. Furthermore, it is crucial that the junction remain unstructured in the unfolded state. These conclusions cannot be derived from a simple examination of the P4-P6 crystal structure (Cate JH et al., 1996, Science 273:1678-1685), showing once again that structure determination must be supplemented with mutational and thermodynamic analysis to provide a complete picture of a folded macromolecule. PMID:9257643

Rural settlements transition (RST) in a suburban area of metropolis: Internal structure perspectives.

PubMed

Ma, Wenqiu; Jiang, Guanghui; Wang, Deqi; Li, Wenqing; Guo, Hongquan; Zheng, Qiuyue

2018-02-15

Rural settlements transition (RST) is one of the most significant indices for understanding the phenomena of rural reconstruction and urban-rural transformation in China. However, a systematic overview of RST is missing, and there is a lack of evidence regarding its characteristics from the internal structure perspectives. In this paper, we systematically explore the RST regarding spatio-temporal change characteristics of internal structure, patterns and impacts on rural environment and development by using practical survey internal land-use data from 2005 to 2015. The results show that the temporal change characteristics of the internal structure of rural settlements demonstrate a tendency for housing land to decrease and other land-use types to increase. The spatial change characteristics reveal that the structure inclines to more complexity and diversity from an exurban area to an urban-rural fringe area. Based on this finding, we identify that rapid development of rural industrialization, more agglomerate and effective industrial land-use, and improved public infrastructure construction are the general RST patterns. Spatially, there exists a physical decay pattern in the exurban area, thereby resulting in the hollowing-out of rural industries and of the population. In addition, the extensive and disorderly pattern in the suburban area causes low efficiency output and serious environmental pollution. The RST pattern in the urban hinterland promoted the "men-environment" compatible development. The study concludes that regional differentiation in patterns and impacts are significant in the process of RST. Future adaptive strategies for rural settlements adjustment should be conducted according to regional characteristics, including socio-economic status, physical geography condition and economic location to improve the rural environmental sustainability. Copyright © 2017 Elsevier B.V. All rights reserved.

Simulation on the internal structure of three-dimensional proximal tibia under different mechanical environments.

PubMed

Fang, Juan; Gong, He; Kong, Lingyan; Zhu, Dong

2013-12-20

Bone can adjust its morphological structure to adapt to the changes of mechanical environment, i.e. the bone structure change is related to mechanical loading. This implies that osteoarthritis may be closely associated with knee joint deformity. The purposes of this paper were to simulate the internal bone mineral density (BMD) change in three-dimensional (3D) proximal tibia under different mechanical environments, as well as to explore the relationship between mechanical environment and bone morphological abnormity. The right proximal tibia was scanned with CT to reconstruct a 3D proximal tibia model in MIMICS, then it was imported to finite element software ANSYS to establish 3D finite element model. The internal structure of 3D proximal tibia of young normal people was simulated using quantitative bone remodeling theory in combination with finite element method, then based on the changing pattern of joint contact force on the tibial plateau in valgus knees, the mechanical loading was changed, and the simulated normal tibia structure was used as initial structure to simulate the internal structure of 3D proximal tibia for old people with 6° valgus deformity. Four regions of interest (ROIs) were selected in the proximal tibia to quantitatively analyze BMD and compare with the clinical measurements. The simulation results showed that the BMD distribution in 3D proximal tibia was consistent with clinical measurements in normal knees and that in valgus knees was consistent with the measurement of patients with osteoarthritis in clinics. It is shown that the change of mechanical environment is the main cause for the change of subchondral bone structure, and being under abnormal mechanical environment for a long time may lead to osteoarthritis. Besides, the simulation method adopted in this paper can more accurately simulate the internal structure of 3D proximal tibia under different mechanical environments. It helps to better understand the mechanism of osteoarthritis and provides theoretical basis and computational method for the prevention and treatment of osteoarthritis. It can also serve as basis for further study on periprosthetic BMD changes after total knee arthroplasty, and provide a theoretical basis for optimization design of prosthesis.

Simulation on the internal structure of three-dimensional proximal tibia under different mechanical environments

PubMed Central

2013-01-01

Background Bone can adjust its morphological structure to adapt to the changes of mechanical environment, i.e. the bone structure change is related to mechanical loading. This implies that osteoarthritis may be closely associated with knee joint deformity. The purposes of this paper were to simulate the internal bone mineral density (BMD) change in three-dimensional (3D) proximal tibia under different mechanical environments, as well as to explore the relationship between mechanical environment and bone morphological abnormity. Methods The right proximal tibia was scanned with CT to reconstruct a 3D proximal tibia model in MIMICS, then it was imported to finite element software ANSYS to establish 3D finite element model. The internal structure of 3D proximal tibia of young normal people was simulated using quantitative bone remodeling theory in combination with finite element method, then based on the changing pattern of joint contact force on the tibial plateau in valgus knees, the mechanical loading was changed, and the simulated normal tibia structure was used as initial structure to simulate the internal structure of 3D proximal tibia for old people with 6° valgus deformity. Four regions of interest (ROIs) were selected in the proximal tibia to quantitatively analyze BMD and compare with the clinical measurements. Results The simulation results showed that the BMD distribution in 3D proximal tibia was consistent with clinical measurements in normal knees and that in valgus knees was consistent with the measurement of patients with osteoarthritis in clinics. Conclusions It is shown that the change of mechanical environment is the main cause for the change of subchondral bone structure, and being under abnormal mechanical environment for a long time may lead to osteoarthritis. Besides, the simulation method adopted in this paper can more accurately simulate the internal structure of 3D proximal tibia under different mechanical environments. It helps to better understand the mechanism of osteoarthritis and provides theoretical basis and computational method for the prevention and treatment of osteoarthritis. It can also serve as basis for further study on periprosthetic BMD changes after total knee arthroplasty, and provide a theoretical basis for optimization design of prosthesis. PMID:24359345

Program Design for Retrospective Searches on Large Data Bases

ERIC Educational Resources Information Center

Thiel, L. H.; Heaps, H. S.

1972-01-01

Retrospective search of large data bases requires development of special techniques for automatic compression of data and minimization of the number of input-output operations to the computer files. The computer program should require a relatively small amount of internal memory. This paper describes the structure of such a program. (9 references)…

Spectroscopic studies of the silicone oil impact on the ophthalmic hydrogel based materials conducted in time dependent mode

NASA Astrophysics Data System (ADS)

Chamerski, Kordian; Stopa, Marcin; Jelen, Piotr; Lesniak, Magdalena; Sitarz, Maciej; Filipecki, Jacek

2018-03-01

Silicone oil is the one of the artificial materials used in vitreoretinal surgery for retinal detachment treatment. Since the silicone oil is sometimes applied along with intraocular lens (IOL) implantation the direct influence of silicone oil on the artificial implant should be taken into account. Presented study was performed in order to determine the time-dependent impact of silicone oil on hydrogel based ophthalmic materials. Two kinds of IOLs based on hydroxyethyl 2-methacrylate (HEMA) hydrogel material were immersed in silicone oil based on linear poly(dimethylsiloxane) (PDMS). Incubation in oil medium was performed in 37 °C for 1, 3 and 6 months. After appropriate period of the incubation samples were examined by means of FTIR-ATR method as the technique of surface study as well as Positron Annihilation Lifetime Spectroscopy (PALS) as the method of internal structure investigation. Results obtained during the study revealed that silicone oil is not capable to penetrate the internal structure of investigated materials and its impact has come down to interaction with the samples surfaces only.

Structural Turnbuckle Bears Compressive or Tensile Loads

NASA Technical Reports Server (NTRS)

Bateman, W. A.; Lang, C. H.

1985-01-01

Column length adjuster based on turnbuckle principle. Device consists of internally and externally threaded bushing, threaded housing and threaded rod. Housing attached to one part and threaded rod attached to other part of structure. Turning double threaded bushing contracts or extends rod in relation to housing. Once adjusted, bushing secured with jamnuts. Device used for axially loaded members requiring length adjustment during installation.

Hepatitis Delta Antigen Requires a Flexible Quasi-Double-Stranded RNA Structure To Bind and Condense Hepatitis Delta Virus RNA in a Ribonucleoprotein Complex

PubMed Central

Griffin, Brittany L.; Chasovskikh, Sergey; Dritschilo, Anatoly

2014-01-01

ABSTRACT The circular genome and antigenome RNAs of hepatitis delta virus (HDV) form characteristic unbranched, quasi-double-stranded RNA secondary structures in which short double-stranded helical segments are interspersed with internal loops and bulges. The ribonucleoprotein complexes (RNPs) formed by these RNAs with the virus-encoded protein hepatitis delta antigen (HDAg) perform essential roles in the viral life cycle, including viral replication and virion formation. Little is understood about the formation and structure of these complexes and how they function in these key processes. Here, the specific RNA features required for HDAg binding and the topology of the complexes formed were investigated. Selective 2′OH acylation analyzed by primer extension (SHAPE) applied to free and HDAg-bound HDV RNAs indicated that the characteristic secondary structure of the RNA is preserved when bound to HDAg. Notably, the analysis indicated that predicted unpaired positions in the RNA remained dynamic in the RNP. Analysis of the in vitro binding activity of RNAs in which internal loops and bulges were mutated and of synthetically designed RNAs demonstrated that the distinctive secondary structure, not the primary RNA sequence, is the major determinant of HDAg RNA binding specificity. Atomic force microscopy analysis of RNPs formed in vitro revealed complexes in which the HDV RNA is substantially condensed by bending or wrapping. Our results support a model in which the internal loops and bulges in HDV RNA contribute flexibility to the quasi-double-stranded structure that allows RNA bending and condensing by HDAg. IMPORTANCE RNA-protein complexes (RNPs) formed by the hepatitis delta virus RNAs and protein, HDAg, perform critical roles in virus replication. Neither the structures of these RNPs nor the RNA features required to form them have been characterized. HDV RNA is unusual in that it forms an unbranched quasi-double-stranded structure in which short base-paired segments are interspersed with internal loops and bulges. We analyzed the role of the HDV RNA sequence and secondary structure in the formation of a minimal RNP and visualized the structure of this RNP using atomic force microscopy. Our results indicate that HDAg does not recognize the primary sequence of the RNA; rather, the principle contribution of unpaired bases in HDV RNA to HDAg binding is to allow flexibility in the unbranched quasi-double-stranded RNA structure. Visualization of RNPs by atomic force microscopy indicated that the RNA is significantly bent or condensed in the complex. PMID:24741096

Direct Bio-printing with Heterogeneous Topology Design.

PubMed

Ahsan, Amm Nazmul; Xie, Ruinan; Khoda, Bashir

2017-01-01

Bio-additive manufacturing is a promising tool to fabricate porous scaffold structures for expediting the tissue regeneration processes. Unlike the most traditional bulk material objects, the microstructures of tissue and organs are mostly highly anisotropic, heterogeneous, and porous in nature. However, modelling the internal heterogeneity of tissues/organs structures in the traditional CAD environment is difficult and oftentimes inaccurate. Besides, the de facto STL conversion of bio-models introduces loss of information and piles up more errors in each subsequent step (build orientation, slicing, tool-path planning) of the bio-printing process plan. We are proposing a topology based scaffold design methodology to accurately represent the heterogeneous internal architecture of tissues/organs. An image analysis technique is used that digitizes the topology information contained in medical images of tissues/organs. A weighted topology reconstruction algorithm is implemented to represent the heterogeneity with parametric functions. The parametric functions are then used to map the spatial material distribution. The generated information is directly transferred to the 3D bio-printer and heterogeneous porous tissue scaffold structure is manufactured without STL file. The proposed methodology is implemented to verify the effectiveness of the approach and the designed example structure is bio-fabricated with a deposition based bio-additive manufacturing system.

Automatic internal crack detection from a sequence of infrared images with a triple-threshold Canny edge detector

NASA Astrophysics Data System (ADS)

Wang, Gaochao; Tse, Peter W.; Yuan, Maodan

2018-02-01

Visual inspection and assessment of the condition of metal structures are essential for safety. Pulse thermography produces visible infrared images, which have been widely applied to detect and characterize defects in structures and materials. When active thermography, a non-destructive testing tool, is applied, the necessity of considerable manual checking can be avoided. However, detecting an internal crack with active thermography remains difficult, since it is usually invisible in the collected sequence of infrared images, which makes the automatic detection of internal cracks even harder. In addition, the detection of an internal crack can be hindered by a complicated inspection environment. With the purpose of putting forward a robust and automatic visual inspection method, a computer vision-based thresholding method is proposed. In this paper, the image signals are a sequence of infrared images collected from the experimental setup with a thermal camera and two flash lamps as stimulus. The contrast of pixels in each frame is enhanced by the Canny operator and then reconstructed by a triple-threshold system. Two features, mean value in the time domain and maximal amplitude in the frequency domain, are extracted from the reconstructed signal to help distinguish the crack pixels from others. Finally, a binary image indicating the location of the internal crack is generated by a K-means clustering method. The proposed procedure has been applied to an iron pipe, which contains two internal cracks and surface abrasion. Some improvements have been made for the computer vision-based automatic crack detection methods. In the future, the proposed method can be applied to realize the automatic detection of internal cracks from many infrared images for the industry.

Organizational and Clinical Implications of Integrating an Alcohol Screening and Brief Intervention Within Non-Substance Abuse Serving Agencies

PubMed Central

PATTERSON, DAVID A.; WOLF (ADELV UNEGV WAYA), SILVER; McKIERNAN, PATRICK M.

2012-01-01

Although there have been efforts to advance evidenced-based practices into community-based organizations the limited successes of dissemination and poor implementation of efficacious treatments within these organizations are beginning to be documented. This article builds on the knowledge gained from organizational research and those internal structures (e.g., culture and climate), which possibly impede or enhance evidenced-based practice implementation within community-based organizations. While there are many evidenced-based practices available to human services organizations, there seems to be a gap between research and the implementation of these clinical practices. Recommendations are provided to better enable community-based organizations to integrate evidenced-based practice into its existing service structures. PMID:20799131

Organizational and clinical implications of integrating an alcohol screening and brief intervention within non-substance abuse serving agencies.

PubMed

Patterson, David A; Wolf Adelv Unegv Waya, Silver; McKiernan, Patrick M

2010-07-01

Although there have been efforts to advance evidenced-based practices into community-based organizations the limited successes of dissemination and poor implementation of efficacious treatments within these organizations are beginning to be documented. This article builds on the knowledge gained from organizational research and those internal structures (e.g., culture and climate), which possibly impede or enhance evidenced-based practice implementation within community-based organizations. While there are many evidenced-based practices available to human services organizations, there seems to be a gap between research and the implementation of these clinical practices. Recommendations are provided to better enable community-based organizations to integrate evidenced-based practice into its existing service structures.

Analysis of spatial configuration of the Palace Museum: an application of the axial-based space syntax

NASA Astrophysics Data System (ADS)

Chen, Jie; Lu, Feng

2006-10-01

Movement in a spatial system is produced and determined by the structure of the complex space itself, rather than special attractors within the whole spatial system. Based on this theory of space syntax, tourists' convergence and dispersal in the Palace Museum should be originated by the distribution of the internal constructions form. This article presents an application of the space syntax approach to the Palace Museum. After analyzing its internal spatial configuration, as a conclusion, the paper provides some rational advices so as to facilitate tourists as well as protect our invaluable cultural heritage.

Automated identification of RNA 3D modules with discriminative power in RNA structural alignments.

PubMed

Theis, Corinna; Höner Zu Siederdissen, Christian; Hofacker, Ivo L; Gorodkin, Jan

2013-12-01

Recent progress in predicting RNA structure is moving towards filling the 'gap' in 2D RNA structure prediction where, for example, predicted internal loops often form non-canonical base pairs. This is increasingly recognized with the steady increase of known RNA 3D modules. There is a general interest in matching structural modules known from one molecule to other molecules for which the 3D structure is not known yet. We have created a pipeline, metaRNAmodules, which completely automates extracting putative modules from the FR3D database and mapping of such modules to Rfam alignments to obtain comparative evidence. Subsequently, the modules, initially represented by a graph, are turned into models for the RMDetect program, which allows to test their discriminative power using real and randomized Rfam alignments. An initial extraction of 22 495 3D modules in all PDB files results in 977 internal loop and 17 hairpin modules with clear discriminatory power. Many of these modules describe only minor variants of each other. Indeed, mapping of the modules onto Rfam families results in 35 unique locations in 11 different families. The metaRNAmodules pipeline source for the internal loop modules is available at http://rth.dk/resources/mrm.

Cross-validation of the Student Perceptions of Team-Based Learning Scale in the United States.

PubMed

Lein, Donald H; Lowman, John D; Eidson, Christopher A; Yuen, Hon K

2017-01-01

The purpose of this study was to cross-validate the factor structure of the previously developed Student Perceptions of Team-Based Learning (TBL) Scale among students in an entry-level doctor of physical therapy (DPT) program in the United States. Toward the end of the semester in 2 patient/client management courses taught using TBL, 115 DPT students completed the Student Perceptions of TBL Scale, with a response rate of 87%. Principal component analysis (PCA) and confirmatory factor analysis (CFA) were conducted to replicate and confirm the underlying factor structure of the scale. Based on the PCA for the validation sample, the original 2-factor structure (preference for TBL and preference for teamwork) of the Student Perceptions of TBL Scale was replicated. The overall goodness-of-fit indices from the CFA suggested that the original 2-factor structure for the 15 items of the scale demonstrated a good model fit (comparative fit index, 0.95; non-normed fit index/Tucker-Lewis index, 0.93; root mean square error of approximation, 0.06; and standardized root mean square residual, 0.07). The 2 factors demonstrated high internal consistency (alpha= 0.83 and 0.88, respectively). DPT students taught using TBL viewed the factor of preference for teamwork more favorably than preference for TBL. Our findings provide evidence supporting the replicability of the internal structure of the Student Perceptions of TBL Scale when assessing perceptions of TBL among DPT students in patient/client management courses.

Psychometric properties of the School Anxiety Inventory-Short Version in Spanish secondary education students.

PubMed

García-Fernández, José M; Inglés, Cándido J; Marzo, Juan C; Martínez-Monteagudo, María C

2014-05-01

The School Anxiety Inventory (SAI) can be applied in different fields of psychology. However, due to the inventory's administration time, it may not be useful in certain situations. To address this concern, the present study developed a short version of the SAI (the SAI-SV). This study examined the reliability and validity evidence drawn from the scores of the School Anxiety Inventory-Short Version (SAI-SV) using a sample of 2,367 (47.91% boys) Spanish secondary school students, ranging from 12 to 18 years of age. To analyze the dimensional structure of the SAI-SV, exploratory and confirmatory factor analyses were applied. Internal consistency and test-retest reliability were calculated for SAI-SV scores. A correlated three-factor structure related to school situations (Anxiety about Aggression, Anxiety about Social Evaluation, and Anxiety about Academic Failure) and a three-factor structure related to the response systems of anxiety (Physiological Anxiety, Cognitive Anxiety, and Behavioral Anxiety) were identified and supported. The internal consistency and test-retest reliability were determined to be appropriate. The reliability and validity evidence based on the internal structure of SAI-SV scores was satisfactory.

Economical concrete mix design utilizing blended cements, performance-based specifications, and pay factors.

DOT National Transportation Integrated Search

2013-05-01

This report showcases several new approaches of using materials science and structural mechanics to accomplish : sustainable design of concrete materials. The topics addressed include blended cements, fiber-reinforced concrete : (FRC), internal curin...

We Are Familia.

ERIC Educational Resources Information Center

Almendariz, Abe Lujan; Villarreal, Micha; Rodriquez, Roy C.

2001-01-01

Describes the family-based administrative structure of the Alicia Chacon International School, a magnet elementary school in El Paso, Texas. Students are motivated to learn within the school's family environment through involvement in cultural activities, multilingual instruction, and family participation. (PKP)

Towards practical implementation of biophotonics-based solutions for cost-effective monitoring of food quality control (Conference Presentation)

NASA Astrophysics Data System (ADS)

Meglinski, Igor; Popov, Alexey; Bykov, Alexander

2017-03-01

Biophotonics-based diagnostic and imaging modalities have been widely used in various applications associated with the non-invasive imaging of the internal structure of a range biological media from a range of cells cultures to biological tissues. With the fast growing interest in food securities there remains strong demand to apply reliable and cost effective biophotonics-based technologies for rapid screening of freshness, internal defects and quality of major agricultural products. In current presentation the results of application of optical coherence tomography (OCT) and encapsulated optical bio-sensors for quantitative assessment of freshness of agricultural products, such as meat and sea foods, are presented, and their further perspectives are discussed.

Understanding comorbidity among internalizing problems: Integrating latent structural models of psychopathology and risk mechanisms

PubMed Central

Hankin, Benjamin L.; Snyder, Hannah R.; Gulley, Lauren D.; Schweizer, Tina H.; Bijttebier, Patricia; Nelis, Sabine; Toh, Gim; Vasey, Michael W.

2016-01-01

It is well known that comorbidity is the rule, not the exception, for categorically defined psychiatric disorders, and this is also the case for internalizing disorders of depression and anxiety. This theoretical review paper addresses the ubiquity of comorbidity among internalizing disorders. Our central thesis is that progress in understanding this co-occurrence can be made by employing latent dimensional structural models that organize both psychopathology as well as vulnerabilities and risk mechanisms and by connecting the multiple levels of risk and psychopathology outcomes together. Different vulnerabilities and risk mechanisms are hypothesized to predict different levels of the structural model of psychopathology. We review the present state of knowledge based on concurrent and developmental sequential comorbidity patterns among common discrete psychiatric disorders in youth, and then we advocate for the use of more recent bifactor dimensional models of psychopathology (e.g., p factor, Caspi et al., 2014) that can help to explain the co-occurrence among internalizing symptoms. In support of this relatively novel conceptual perspective, we review six exemplar vulnerabilities and risk mechanisms, including executive function, information processing biases, cognitive vulnerabilities, positive and negative affectivity aspects of temperament, and autonomic dysregulation, along with the developmental occurrence of stressors in different domains, to show how these vulnerabilities can predict the general latent psychopathology factor, a unique latent internalizing dimension, as well as specific symptom syndrome manifestations. PMID:27739389

Piloting a Structured Practice Audit to Assess ACGME Milestones in Written Handoff Communication in Internal Medicine

PubMed Central

Martin, Shannon K.; Farnan, Jeanne M.; McConville, John F.; Arora, Vineet M.

2015-01-01

Background Written communication skills are integral to patient care handoffs. Residency programs require feasible assessment tools that provide timely formative and summative feedback, ideally linked to the Accreditation Council for Graduate Medical Education Milestones. Objective We describe the use of 1 such tool—UPDATED—to assess written handoff communication skills in internal medicine interns. Methods During 2012–2013, the authors piloted a structured practice audit at 1 academic institution to audit written sign-outs completed by 45 interns, using the UPDATED tool, which scores 7 aspects of sign-out communication linked to milestones. Intern sign-outs were audited by trained faculty members throughout the year. Results were incorporated into intern performance reviews and Clinical Competency Committees. Results A total of 136 sign-outs were audited (averaging 3.1 audits per intern). In the first trimester, 14 interns (31%) had satisfactory audit results. Five interns (11%) had critical deficiencies and received immediate feedback, and the remaining 26 (58%) were assigned future audits due to missing audits or unsatisfactory scores. In the second trimester, 21 interns (68%) had satisfactory results, 1 had critical deficiencies, and 9 (29%) required future audits. Nine of the 10 remaining interns in the final trimester had satisfactory audits. Faculty time was estimated at 10 to 15 minutes per sign-out audited. Conclusions The UPDATED audit is a milestone-based tool that can be used to assess written sign-out communication skills in internal medicine residency programs. Future work is planned to adapt the tool for use by senior supervisory residents to appraise sign-outs in real time. PMID:26221442

Piloting a Structured Practice Audit to Assess ACGME Milestones in Written Handoff Communication in Internal Medicine.

PubMed

Martin, Shannon K; Farnan, Jeanne M; McConville, John F; Arora, Vineet M

2015-06-01

Written communication skills are integral to patient care handoffs. Residency programs require feasible assessment tools that provide timely formative and summative feedback, ideally linked to the Accreditation Council for Graduate Medical Education Milestones. We describe the use of 1 such tool-UPDATED-to assess written handoff communication skills in internal medicine interns. During 2012-2013, the authors piloted a structured practice audit at 1 academic institution to audit written sign-outs completed by 45 interns, using the UPDATED tool, which scores 7 aspects of sign-out communication linked to milestones. Intern sign-outs were audited by trained faculty members throughout the year. Results were incorporated into intern performance reviews and Clinical Competency Committees. A total of 136 sign-outs were audited (averaging 3.1 audits per intern). In the first trimester, 14 interns (31%) had satisfactory audit results. Five interns (11%) had critical deficiencies and received immediate feedback, and the remaining 26 (58%) were assigned future audits due to missing audits or unsatisfactory scores. In the second trimester, 21 interns (68%) had satisfactory results, 1 had critical deficiencies, and 9 (29%) required future audits. Nine of the 10 remaining interns in the final trimester had satisfactory audits. Faculty time was estimated at 10 to 15 minutes per sign-out audited. The UPDATED audit is a milestone-based tool that can be used to assess written sign-out communication skills in internal medicine residency programs. Future work is planned to adapt the tool for use by senior supervisory residents to appraise sign-outs in real time.

Structural testing and analysis of a braided, inflatable fabric torus structure

NASA Astrophysics Data System (ADS)

Young, Andrew C.; Davids, William G.; Whitney, Daniel J.; Clapp, Joshua D.; Goupee, Andrew J.

2017-10-01

Inflatable structural members have military, disaster relief, aerospace and other important applications as they possess low mass, can be stored in a relatively small volume and have significant load-carrying capacity once pressurized. Of particular interest to the present research is the Hypersonic Inflatable Aerodynamic Decelerator (HIAD) structure under development by NASA. In order to make predictions about the structural response of the HIAD system, it is necessary to understand the response of individual inflatable tori composing the HIAD structure. These inflatable members present unique challenges to structural testing and modeling due to their internal inflation pressure and relative compliance. Structural testing was performed on a braided, inflatable, toroidal structural member with axial reinforcing cords. The internal inflation pressure, magnitude of enforced displacement and loading methodology were varied. In-plane and out-of-plane experimental results were compared to model predictions using a three dimensional, corotational, flexibility-based fiber-beam finite element model including geometric and material nonlinearities, as well as the effects of inflation pressure. It was found that in order to approximate the load-deformation response observed in experimentation it is necessary to carefully control the test and model boundary conditions and loading scheme.

Working Definitions of the Roles and an Organizational Structure in Health Professions Education Scholarship: Initiating an International Conversation.

PubMed

Varpio, Lara; Gruppen, Larry; Hu, Wendy; O'Brien, Bridget; Ten Cate, Olle; Humphrey-Murto, Susan; Irby, David M; van der Vleuten, Cees; Hamstra, Stanley J; Durning, Steven J

2017-02-01

Health professions education scholarship (HPES) is an important and growing field of inquiry. Problematically, consistent use of terminology regarding the individual roles and organizational structures that are active in this field are lacking. This inconsistency impedes the transferability of current and future findings related to the roles and organizational structures of HPES. Based on data collected during interviews with HPES leaders in Canada, Australia, New Zealand, the United States, and the Netherlands, the authors constructed working definitions for some of the professional roles and an organizational structure that support HPES. All authors reviewed the definitions to ensure relevance across multiple countries. The authors define and offer illustrative examples of three professional roles in HPES (clinician educator, HPES research scientist, and HPES administrative leader) and an organizational structure that can support HPES participation (HPES unit). These working definitions are foundational and not all-encompassing and, thus, are offered as stimulus for international dialogue and understanding. With these working definitions, scholars and administrative leaders can examine HPES roles and organizational structures across and between national contexts to decide how lessons learned in other contexts can be applied to their local contexts. Although rigorously constructed, these definitions need to be vetted by the international HPES community. The authors argue that these definitions are sufficiently transferable to support such scholarly investigation and debate.

National Institute on Drug Abuse International Program: improving opioid use disorder treatment through international research training.

PubMed

Gust, Steven W; McCormally, Judy

2018-07-01

For more than 25 years, the National Institute on Drug Abuse (NIDA) has supported research-training programs, establishing a global research network and expanding the knowledge base on substance use disorders. International research to inform approaches to opioid addiction is particularly important and relevant to the United States, where opioid misuse, addiction, and overdose constitute an emerging public health crisis. This article summarizes the NIDA International Program and illustrates its impact by reviewing recent articles about treatment approaches for opioid use disorders (OUD). Studies in several countries have demonstrated the effectiveness of physician office-based opioid substitution therapies. Other research has demonstrated the effectiveness of different formulations and doses of the opioid antagonist naltrexone, as well as different approaches to providing naloxone to treat opioid overdose. Continuing research into implementation of evidence-based treatment in international settings with limited resources is applicable to US regions that face similar structural, legal, and fiscal constraints. The current review describes international research on OUD treatment and opioid overdose, most coauthored by former NIDA fellows. The findings from outside the United States have important implications for best practices domestically and in other countries that are experiencing increases in OUD prevalence and related overdose deaths.

Preparation and investigation of novel gastro-floating tablets with 3D extrusion-based printing.

PubMed

Li, Qijun; Guan, Xiaoying; Cui, Mengsuo; Zhu, Zhihong; Chen, Kai; Wen, Haoyang; Jia, Danyang; Hou, Jian; Xu, Wenting; Yang, Xinggang; Pan, Weisan

2018-01-15

Three dimensional (3D) extrusion-based printing is a paste-based rapid prototyping process, which is capable of building complex 3D structures. The aim of this study was to explore the feasibility of 3D extrusion-based printing as a pharmaceutical manufacture technique for the fabrication of gastro-floating tablets. Novel low-density lattice internal structure gastro-floating tablets of dipyridamole were developed to prolong the gastric residence time in order to improve drug release rate and consequently, improve bioavailability and therapeutic efficacy. Excipients commonly employed in the pharmaceutical study could be efficiently applied in the room temperature 3D extrusion-based printing process. The tablets were designed with three kinds of infill percentage and prepared by hydroxypropyl methylcellulose (HPMC K4M) and hydroxypropyl methylcellulose (HPMC E15) as hydrophilic matrices and microcrystalline cellulose (MCC PH101) as extrusion molding agent. In vitro evaluation of the 3D printed gastro-floating tablets was performed by determining mechanical properties, content uniformity, and weight variation. Furthermore, re-floating ability, floating duration time, and drug release behavior were also evaluated. Dissolution profiles revealed the relationship between infill percentage and drug release behavior. The results of this study revealed the potential of 3D extrusion-based printing to fabricate gastro-floating tablets with more than 8h floating process with traditional pharmaceutical excipients and lattice internal structure design. Copyright © 2017. Published by Elsevier B.V.

A neurosurgical simulation of skull base tumors using a 3D printed rapid prototyping model containing mesh structures.

PubMed

Kondo, Kosuke; Harada, Naoyuki; Masuda, Hiroyuki; Sugo, Nobuo; Terazono, Sayaka; Okonogi, Shinichi; Sakaeyama, Yuki; Fuchinoue, Yutaka; Ando, Syunpei; Fukushima, Daisuke; Nomoto, Jun; Nemoto, Masaaki

2016-06-01

Deep regions are not visible in three-dimensional (3D) printed rapid prototyping (RP) models prepared from opaque materials, which is not the case with translucent images. The objectives of this study were to develop an RP model in which a skull base tumor was simulated using mesh, and to investigate its usefulness for surgical simulations by evaluating the visibility of its deep regions. A 3D printer that employs binder jetting and is mainly used to prepare plaster models was used. RP models containing a solid tumor, no tumor, and a mesh tumor were prepared based on computed tomography, magnetic resonance imaging, and angiographic data for four cases of petroclival tumor. Twelve neurosurgeons graded the three types of RP model into the following four categories: 'clearly visible,' 'visible,' 'difficult to see,' and 'invisible,' based on the visibility of the internal carotid artery, basilar artery, and brain stem through a craniotomy performed via the combined transpetrosal approach. In addition, the 3D positional relationships between these structures and the tumor were assessed. The internal carotid artery, basilar artery, and brain stem and the positional relationships of these structures with the tumor were significantly more visible in the RP models with mesh tumors than in the RP models with solid or no tumors. The deep regions of PR models containing mesh skull base tumors were easy to visualize. This 3D printing-based method might be applicable to various surgical simulations.

Optimal Mass Transport for Statistical Estimation, Image Analysis, Information Geometry, and Control

DTIC Science & Technology

2017-01-10

Metric Uncertainty for Spectral Estimation based on Nevanlinna-Pick Interpolation, (with J. Karlsson) Intern. Symp. on the Math . Theory of Networks and...Systems, Melbourne 2012. 22. Geometric tools for the estimation of structured covariances, (with L. Ning, X. Jiang) Intern. Symposium on the Math . Theory...estimation and the reversibility of stochastic processes, (with Y. Chen, J. Karlsson) Proc. Int. Symp. on Math . Theory of Networks and Syst., July

Russia and the United States: Future Implications of Historical Relationships

DTIC Science & Technology

2009-04-01

paper relates the theory to the current unipolar international structure and states how the U.S.-Russian relationship could proceed in the future...explained by realist states working inside of the ―capitalist world system.‖ The paper relates the theory to the current unipolar international...inside a world system. One theory of the world system is based on the concept of a capitalist world economy whose efficiency-seeking transnational

Structure and dynamics of protein waters revealed by radiolysis and mass spectrometry

PubMed Central

Gupta, Sayan; D’Mello, Rhijuta; Chance, Mark R.

2012-01-01

Water is critical for the structure, stability, and functions of macromolecules. Diffraction and NMR studies have revealed structure and dynamics of bound waters at atomic resolution. However, localizing the sites and measuring the dynamics of bound waters, particularly on timescales relevant to catalysis and macromolecular assembly, is quite challenging. Here we demonstrate two techniques: first, temperature-dependent radiolytic hydroxyl radical labeling with a mass spectrometry (MS)-based readout to identify sites of bulk and bound water interactions with surface and internal residue side chains, and second, H218O radiolytic exchange coupled MS to measure the millisecond dynamics of bound water interactions with various internal residue side chains. Through an application of the methods to cytochrome c and ubiquitin, we identify sites of water binding and measure the millisecond dynamics of bound waters in protein crevices. As these MS-based techniques are very sensitive and not protein size limited, they promise to provide unique insights into protein–water interactions and water dynamics for both small and large proteins and their complexes. PMID:22927377

Nanometer scale atomic structure of zirconium based bulk metallic glass

NASA Astrophysics Data System (ADS)

Hwang, Jinwoo

We have studied the nanometer scale structure of bulk metallic glass (BMG) using fluctuation electron microscopy (FEM). The nanometer scale medium range order (MRO) in BMG is of significant interest because of its possible relationship to the properties, but the experimental study of the MRO is difficult because conventional diffraction techniques are not sensitive to the MRO scale. FEM is a quantitative transmission electron microscopy technique which measures the nanoscale structural fluctuation associated with MRO in amorphous materials, and provides information about the size, distribution, and internal structure of MRO. In this work, we developed an improved method for FEM using energy-filtered STEM nanodiffraction with highly coherent probes with size up to 11nm in a state-of-the-art Cs- corrected STEM. We also developed an effective way to eliminate the effect of sample thickness variation to the FEM data by using Z-contrast images as references. To study the detailed structure of MRO, we developed a hybrid reverse Monte Carlo (H-RMC) simulation which combines an empirical atomic potential and the FEM data. H-RMC generated model structures that match the experimental data at short and medium range. In addition, the subtle rotational symmetries in the FEM nanodiffraction patterns were analyzed by angular correlation function to reveal more details of the internal structure of MRO. Our experiments and simulations show that Zr-based BMG contains pseudo-planar, crystal-like MRO as well as icosahedral clusters in its nanoscale structure. We found that some icosahedral clusters may be connected, and that structural relaxation by annealing increases the population of icosahedral clusters.

Internal quantum efficiency in yellow-amber light emitting AlGaN-InGaN-GaN heterostructures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ngo, Thi Huong; Gil, Bernard; Valvin, Pierre

2015-09-21

We determine the internal quantum efficiency of strain-balanced AlGaN-InGaN-GaN hetero-structures designed for yellow-amber light emission, by using a recent model based on the kinetics of the photoluminescence decay initiated by Iwata et al. [J. Appl. Phys. 117, 075701 (2015)]. Our results indicate that low temperature internal quantum efficiencies sit in the 50% range and we measure that adding an AlGaN layer increases the internal quantum efficiency from 50% up to 57% with respect to the GaN-InGaN case. More dramatic, it almost doubles from 2.5% up to 4.3% at room temperature.

Concealing Concealment: The Mediating Role of Internalized Heterosexism in Psychological Distress Among Lesbian, Gay, and Bisexual Older Adults

PubMed Central

Hoy-Ellis, Charles P.

2016-01-01

Recent population-based studies indicate that sexual minorities aged 50 and older experience significantly higher rates of psychological distress than their heterosexual age-peers. The minority stress model has been useful in explaining disparately high rates of psychological distress among younger sexual minorities. The purpose of this study is to test a hypothesized structural relationship between two minority stressors—internalized heterosexism and concealment of sexual orientation—and consequent psychological distress among a sample of 2,349 lesbian, gay, and bisexual adults aged 50 to 95 years old. Structural equation modeling indicates that concealment has a nonsignificant direct effect on psychological distress but a significant indirect effect that is mediated through internalized heterosexism; the effect of concealment is itself concealed. This may explain divergent results regarding the role of concealment in psychological distress in other studies, and the implications will be discussed. PMID:26322654

Vibration Modal Characterization of a Stirling Convertor via Base-Shake Excitation

NASA Technical Reports Server (NTRS)

Suarez, Vicente J.; Goodnight, Thomas W.; Hughes, William O.; Samorezov, Sergey

2003-01-01

The U.S. Department of Energy (DOE), Lockheed Martin (LM), Stirling Technology Company (STC), and NASA John H. Glenn Research Center (GRC) are currently developing a high-efficiency Stirling convertor for use in a Stirling Radioisotope Generator (SRG). NASA and DOE have identified the SRG for potential use as an advanced power system for future NASA Space Science missions, providing spacecraft onboard electric power for deep space missions and power for unmanned Mars rovers. Low-level, baseshake sine vibration tests were conducted on the Stirling Technology Demonstration Convertor (TDC), at NASA GRC's Structural Dynamics Laboratory, in February 2001, as part of the development of this Stirling technology. The purpose of these tests was to provide a better understanding of the TDC's internal dynamic response to external vibratory base excitations. The knowledge obtained can therein be used to help explain the success that the TDC enjoyed in its previous random vibration qualification tests (December 1999). This explanation focuses on the TDC s internal dynamic characteristics in the 50 to 250 Hz frequency range, which corresponds to the maximum input levels of its qualification random vibration test specification. The internal dynamic structural characteristics of the TDC have now been measured in two separate tests under different motoring and dynamic loading conditions: (1) with the convertor being electrically motored, under a vibratory base-shake excitation load, and (2) with the convertor turned off, and its alternator internals undergoing dynamic excitation via hammer impact loading. This paper addresses the test setup, procedure and results of the base-shake vibration testing conducted on the motored TDC, and will compare these results with those results obtained from the dynamic impact tests (May 2001) on the nonmotored TDC.

PREFACE: Preface

NASA Astrophysics Data System (ADS)

Hotta, Takashi

2016-02-01

This volume of Journal of Physics: Conference Series contains both invited and contributed papers presented at the International Symposium on "New Quantum Phases Emerging from Novel Crystal Structure", which was held from 24-25 September 2015 at the Minami-Osawa Campus of Tokyo Metropolitan University (TMU). The Graduate School of Science and Engineering of TMU is now promoting a research project on "New Quantum Phases Emerging from Novel Crystal Structure" with the support of the university. This is the cooperative project involving the electrical and electronic engineering and physics departments to discover new quantum phases in strongly correlated electron systems on novel crystal structures, with geometrically characteristic properties such as cage, layered, and geometrical frustrated structures. In this international symposium, we have mainly picked up BiS2-based layered superconductors, cage-structure materials such as 1-2-20 and filled skutterudites, geometrically frustrated systems such as pyrochlore compounds, and noncentrosymmetric materials. Topics on other materials with exotic crystal structure have been also discussed. I believe that this symposium provides a good opportunity to present recent research results on magnetism and superconductivity in such materials, and to discuss future directions of research on strongly correlated electron systems with novel crystal structure. I would like to give thanks, on behalf of the organizing committee, to all participants of the TMU International Symposium and all members of the Advisory Committee, who have contributed to the success of this symposium. I further thank the TMU Research Organization for the financial support of this symposium.

Effects of internal structure on equilibrium of field-reversed configuration plasma sustained by rotating magnetic field

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yambe, Kiyoyuki; Inomoto, Michiaki; Okada, Shigefumi

The effects of an internal structure on the equilibrium of a field-reversed configuration (FRC) plasma sustained by rotating magnetic field is investigated by using detailed electrostatic probe measurements in the FRC Injection Experiment apparatus [S. Okada, et al., Nucl. Fusion. 45, 1094 (2005)]. An internal structure installed axially on the geometrical axis, which simulates Ohmic transformer or external toroidal field coils on the FRC device, brings about substantial changes in plasma density profile. The internal structure generates steep density-gradients not only on the inner side but on the outer side of the torus. The radial electric field is observed tomore » sustain the ion thermal pressure-gradient in the FRC without the internal structure; however, the radial electric field is not sufficient to sustain the increased ion thermal pressure-gradient in the FRC with the internal structure. Spontaneously driven azimuthal ion flow will be accountable for the imbalance of the radial pressure which is modified by the internal structure.« less

Impact of Soft Tissue Heterogeneity on Augmented Reality for Liver Surgery.

PubMed

Haouchine, Nazim; Cotin, Stephane; Peterlik, Igor; Dequidt, Jeremie; Lopez, Mario Sanz; Kerrien, Erwan; Berger, Marie-Odile

2015-05-01

This paper presents a method for real-time augmented reality of internal liver structures during minimally invasive hepatic surgery. Vessels and tumors computed from pre-operative CT scans can be overlaid onto the laparoscopic view for surgery guidance. Compared to current methods, our method is able to locate the in-depth positions of the tumors based on partial three-dimensional liver tissue motion using a real-time biomechanical model. This model permits to properly handle the motion of internal structures even in the case of anisotropic or heterogeneous tissues, as it is the case for the liver and many anatomical structures. Experimentations conducted on phantom liver permits to measure the accuracy of the augmentation while real-time augmentation on in vivo human liver during real surgery shows the benefits of such an approach for minimally invasive surgery.

Ecotechnology: basis of a new immission concept in water pollution control.

PubMed

Benndorf, J

2005-01-01

Beyond the traditional load reduction also an ecosystem-internal mechanism can be used to minimise the effects of water pollution. The control of the internal mechanisms is achieved through the optimisation of the ecosystem structure. This ecotechnology principle is based on the idea to reduce as much as possible the gap between the current (suboptimal) structural status and the optimum structure by intentional manipulations. The spectrum of such manipulations is very broad. A few examples are demonstrated. They comprise physical (e.g. stream morphology), chemical (e.g. enhancing the redox potential at the sediment-water interface) and biological (e.g. enhancing stocks of predatory fishes) control measures. It can be supposed that a new immission concept including the ecotechnology principle could be much more adequate to the demand of modern water pollution control than the traditional emission and imission concepts.

Gravitational birefringence and an exotic formula for redshifts

NASA Astrophysics Data System (ADS)

Duval, Christian; Pasquet, Johanna; Schücker, Thomas; Tilquin, André

2018-06-01

We compute the birefringence of light in curved Robertson-Walker spacetimes and propose an exotic formula for redshift based on the internal structure of the spinning photon. We then use the Hubble diagram of supernovae to test this formula.

Development of 3D microwave imaging technology for damage assessment of concrete bridge.

DOT National Transportation Integrated Search

2003-11-01

An innovative microwave 3-dimensional (3D) sub-surface imaging technology is developed for : detecting and quantitatively assessing internal damage of concrete structures. This technology is : based on reconstruction of dielectric profile (image) of ...

Correlations of External Landmarks With Internal Structures of the Temporal Bone.

PubMed

Piromchai, Patorn; Wijewickrema, Sudanthi; Smeds, Henrik; Kennedy, Gregor; O'Leary, Stephen

2015-09-01

The internal anatomy of a temporal bone could be inferred from external landmarks. Mastoid surgery is an important skill that ENT surgeons need to acquire. Surgeons commonly use CT scans as a guide to understanding anatomical variations before surgery. Conversely, in cases where CT scans are not available, or in the temporal bone laboratory where residents are usually not provided with CT scans, it would be beneficial if the internal anatomy of a temporal bone could be inferred from external landmarks. We explored correlations between internal anatomical variations and metrics established to quantify the position of external landmarks that are commonly exposed in the operating room, or the temporal bone laboratory, before commencement of drilling. Mathematical models were developed to predict internal anatomy based on external structures. From an operating room view, the distances between the following external landmarks were observed to have statistically significant correlations with the internal anatomy of a temporal bone: temporal line, external auditory canal, mastoid tip, occipitomastoid suture, and Henle's spine. These structures can be used to infer a low lying dura mater (p = 0.002), an anteriorly located sigmoid sinus (p = 0.006), and a more lateral course of the facial nerve (p < 0.001). In the temporal bone laboratory view, the mastoid tegmen and sigmoid sinus were also regarded as external landmarks. The distances between these two landmarks and the operating view external structures were able to further infer the laterality of the facial nerve (p < 0.001) and a sclerotic mastoid (p < 0.001). Two nonlinear models were developed that predicted the distances between the following internal structures with a high level of accuracy: the distance from the sigmoid sinus to the posterior external auditory canal (p < 0.001) and the diameter of the round window niche (p < 0.001). The prospect of encountering some of the more technically challenging anatomical variants encountered in temporal bone dissection can be inferred from the distance between external landmarks found on the temporal bone. These relationships could be used as a guideline to predict challenges during drilling and choosing appropriate temporal bones for dissection.

Effect of Topology Structure on the Output Performance of an Automobile Exhaust Thermoelectric Generator

NASA Astrophysics Data System (ADS)

Fang, W.; Quan, S. H.; Xie, C. J.; Ran, B.; Li, X. L.; Wang, L.; Jiao, Y. T.; Xu, T. W.

2017-05-01

The majority of the thermal energy released in an automotive internal combustion cycle is exhausted as waste heat through the tail pipe. This paper describes an automobile exhaust thermoelectric generator (AETEG), designed to recycle automobile waste heat. A model of the output characteristics of each thermoelectric device was established by testing their open circuit voltage and internal resistance, and combining the output characteristics. To better describe the relationship, the physical model was transformed into a topological model. The connection matrix was used to describe the relationship between any two thermoelectric devices in the topological structure. Different topological structures produced different power outputs; their output power was maximised by using an iterative algorithm to optimize the series-parallel electrical topology structure. The experimental results have shown that the output power of the optimal topology structure increases by 18.18% and 29.35% versus that of a pure in-series or parallel topology, respectively, and by 10.08% versus a manually defined structure (based on user experience). The thermoelectric conversion device increased energy efficiency by 40% when compared with a traditional car.

Lightweight Thermoformed Structural Components and Optics

NASA Technical Reports Server (NTRS)

Zeiders, Glenn W.; Bradford, Larry J.

2004-01-01

A technique that involves the use of thermoformed plastics has been developed to enable the design and fabrication of ultra-lightweight structural components and mirrors for use in outer space. The technique could also be used to produce items for special terrestrial uses in which minimization of weight is a primary design consideration. Although the inherent strengths of thermoplastics are clearly inferior to those of metals and composite materials, thermoplastics offer a distinct advantage in that they can be shaped, at elevated temperatures, to replicate surfaces (e.g., prescribed mirror surfaces) precisely. Furthermore, multiple elements can be bonded into structures of homogeneous design that display minimal thermal deformation aside from simple expansion. The design aspect of the present technique is based on the principle that the deflection of a plate that has internal structure depends far more on the overall thickness than on the internal details; thus, a very stiff, light structure can be made from thin plastic that is heatformed to produce a sufficiently high moment of inertia. General examples of such structures include I beams and eggcrates.

Process Features in Writing: Internal Structure and Incremental Value over Product Features. Research Report. ETS RR-15-27

ERIC Educational Resources Information Center

Zhang, Mo; Deane, Paul

2015-01-01

In educational measurement contexts, essays have been evaluated and formative feedback has been given based on the end product. In this study, we used a large sample collected from middle school students in the United States to investigate the factor structure of the writing process features gathered from keystroke logs and the association of that…

Validation of the Factor Structure of the Positive Life Assets Scale for High School Students in Thailand

ERIC Educational Resources Information Center

Tripathi, Suriyadeo

2018-01-01

The aim of the present study was to determine the factor structure of the Positive Life Assets Scale (PLAS), a new measure to identify both internal and external life assets among high school students in Thailand, and to further examine the usefulness of the PLAS for a comprehensive, developmental, and strengths-based school and community…

A nucleobase-centered coarse-grained representation for structure prediction of RNA motifs.

PubMed

Poblete, Simón; Bottaro, Sandro; Bussi, Giovanni

2018-02-28

We introduce the SPlit-and-conQueR (SPQR) model, a coarse-grained (CG) representation of RNA designed for structure prediction and refinement. In our approach, the representation of a nucleotide consists of a point particle for the phosphate group and an anisotropic particle for the nucleoside. The interactions are, in principle, knowledge-based potentials inspired by the $\\mathcal {E}$SCORE function, a base-centered scoring function. However, a special treatment is given to base-pairing interactions and certain geometrical conformations which are lost in a raw knowledge-based model. This results in a representation able to describe planar canonical and non-canonical base pairs and base-phosphate interactions and to distinguish sugar puckers and glycosidic torsion conformations. The model is applied to the folding of several structures, including duplexes with internal loops of non-canonical base pairs, tetraloops, junctions and a pseudoknot. For the majority of these systems, experimental structures are correctly predicted at the level of individual contacts. We also propose a method for efficiently reintroducing atomistic detail from the CG representation.

Single ether group in a glycol-based ultra-thin layer prevents surface fouling from undiluted serum.

PubMed

Sheikh, Sonia; Yang, David Yi; Blaszykowski, Christophe; Thompson, Michael

2012-01-30

Through systematic structural modification, it is shown that the internal, single oxygen atom of simple monoethylene glycol-based organic films is essential for radically altering the fouling behaviour of quartz against undiluted serum, as characterized by the electromagnetic piezoelectric acoustic sensor. The synergy is strongest with distal hydroxyls.

Effect of Clinically Discriminating, Evidence-Based Checklist Items on the Reliability of Scores from an Internal Medicine Residency OSCE

ERIC Educational Resources Information Center

Daniels, Vijay J.; Bordage, Georges; Gierl, Mark J.; Yudkowsky, Rachel

2014-01-01

Objective structured clinical examinations (OSCEs) are used worldwide for summative examinations but often lack acceptable reliability. Research has shown that reliability of scores increases if OSCE checklists for medical students include only clinically relevant items. Also, checklists are often missing evidence-based items that high-achieving…

Advances in Structural Integrity Analysis Methods for Aging Metallic Airframe Structures with Local Damage

NASA Technical Reports Server (NTRS)

Starnes, James H., Jr.; Newman, James C., Jr.; Harris, Charles E.; Piascik, Robert S.; Young, Richard D.; Rose, Cheryl A.

2003-01-01

Analysis methodologies for predicting fatigue-crack growth from rivet holes in panels subjected to cyclic loads and for predicting the residual strength of aluminum fuselage structures with cracks and subjected to combined internal pressure and mechanical loads are described. The fatigue-crack growth analysis methodology is based on small-crack theory and a plasticity induced crack-closure model, and the effect of a corrosive environment on crack-growth rate is included. The residual strength analysis methodology is based on the critical crack-tip-opening-angle fracture criterion that characterizes the fracture behavior of a material of interest, and a geometric and material nonlinear finite element shell analysis code that performs the structural analysis of the fuselage structure of interest. The methodologies have been verified experimentally for structures ranging from laboratory coupons to full-scale structural components. Analytical and experimental results based on these methodologies are described and compared for laboratory coupons and flat panels, small-scale pressurized shells, and full-scale curved stiffened panels. The residual strength analysis methodology is sufficiently general to include the effects of multiple-site damage on structural behavior.

Roles of dynamical symmetry breaking in driving oblate-prolate transitions of atomic clusters

NASA Astrophysics Data System (ADS)

Oka, Yurie; Yanao, Tomohiro; Koon, Wang Sang

2015-04-01

This paper explores the driving mechanisms for structural transitions of atomic clusters between oblate and prolate isomers. We employ the hyperspherical coordinates to investigate structural dynamics of a seven-atom cluster at a coarse-grained level in terms of the dynamics of three gyration radii and three principal axes, which characterize overall mass distributions of the cluster. Dynamics of gyration radii is governed by two kinds of forces. One is the potential force originating from the interactions between atoms. The other is the dynamical forces called the internal centrifugal forces, which originate from twisting and shearing motions of the system. The internal centrifugal force arising from twisting motions has an effect of breaking the symmetry between two gyration radii. As a result, in an oblate isomer, activation of the internal centrifugal force that has the effect of breaking the symmetry between the two largest gyration radii is crucial in triggering structural transitions into prolate isomers. In a prolate isomer, on the other hand, activation of the internal centrifugal force that has the effect of breaking the symmetry between the two smallest gyration radii is crucial in triggering structural transitions into oblate isomers. Activation of a twisting motion that switches the movement patterns of three principal axes is also important for the onset of structural transitions between oblate and prolate isomers. Based on these trigger mechanisms, we finally show that selective activations of specific gyration radii and twisting motions, depending on the isomer of the cluster, can effectively induce structural transitions of the cluster. The results presented here could provide further insights into the control of molecular reactions.

The internal structure of the Brunt Ice Shelf, Antarctica from ice-penetrating radar

NASA Astrophysics Data System (ADS)

King, Edward; De Rydt, Jan; Gudmundsson, Hilmar

2016-04-01

The Brunt Ice Shelf is a small feature on the Coats Land Coast of the Weddell Sea, Antarctica. It is unusual among Antarctic ice shelves because the ice crossing the grounding line from the ice sheet retains no structural integrity, so the ice shelf comprises icebergs of continental ice cemented together by sea ice, with the whole blanketed by in-situ snowfall. The size and distribution of the icebergs is governed by the thickness profile along the grounding line. Where bedrock troughs discharge thick ice to the ice shelf, the icebergs are large and remain close together with little intervening sea ice. Where bedrock ridges mean the ice crossing the grounding line is thin, the icebergs are small and widely-scattered with large areas of sea ice between them. To better understand the internal structure of the Brunt Ice Shelf and how this might affect the flow dynamics we conducted ice-penetrating radar surveys during December 2015 and January 2016. Three different ground-based radar systems were used, operating at centre frequencies of 400, 50 and 10 MHz respectively. The 400 MHz system gave detailed firn structure and accumulation profiles as well as time-lapse profiles of the active propagation of a crevasse. The 50 MHz system provided intermediate-level detail of iceberg distribution and thickness as well as information on the degree of salt water infiltration into the accumulating snow pack. The 10 MHz system used a high-power transmitter in an attempt to measure ice thickness beneath salt-impregnated ice. In this poster we will present example data from each of the three radar systems which will demonstrate the variability of the internal structure of the ice shelf. We will also present preliminary correlations between the internal structure and the surface topography from satellite data.

Estimating Rheological Parameters of Anhydrite from Folded Evaporite sequences: Implications for Internal Dynamics of Salt Structure

NASA Astrophysics Data System (ADS)

Adamuszek, Marta; Dabrowski, Marcin; Schmalholz, Stefan M.; Urai, Janos L.; Raith, Alexander

2015-04-01

Salt structures have been identified as a potential target for hydrocarbon, CO2, or radioactive waste storage. The most suitable locations for magazines are considered in the thick and relatively homogeneous rock salt layers. However, salt structures often consist of the evaporite sequence including rock salt intercalated with other rock types e.g.: anhydrite, gypsum, potassium and magnesium salt, calcite, dolomite, or shale. The presence of such heterogeneities causes a serious disturbance in the structure management. Detailed analysis of the internal architecture and internal dynamics of the salt structure are crucial for evaluating them as suitable repositories and also their long-term stability. The goal of this study is to analyse the influence of the presence of anhydrite layers on the internal dynamics of salt structures. Anhydrite is a common rock in evaporite sequences. Its physical and mechanical properties strongly differ from the properties of rock salt. The density of anhydrite is much higher than the density of salt, thus anhydrite is likely to sink in salt causing the disturbance of the surrounding structures. This suggestion was the starting point to the discussion about the long-term stability of the magazines in salt structures [1]. However, the other important parameter that has to be taken into account is the viscosity of anhydrite. The high viscosity ratio between salt and anhydrite can restrain the layer from sinking. The rheological behaviour of anhydrite has been studied in laboratory experiments [2], but the results only provide information about the short-term behaviour. The long-term behaviour can be best predicted using indirect methods e.g. based on the analysis of natural structures that developed over geological time scale. One of the most promising are fold structures, the shape of which is very sensitive to the rheological parameters of the deforming materials. Folds can develop in mechanically stratified materials during layer parallel shortening. Mechanical model have been developed to rigorously correlate rheological properties of rock to the fold shape. A quantitative fold shape analysis combined with the folding theory allows deciphering the rock rheology. In this study, we analyse anhydrite layers embedded in the rock salt from the Upper Permian Zechstein salt formation from Dutch offshore. The anhydrite layers are common intercalation in the sequence. Their thickness varies between few millimetres up to hundred meters. The layers are strongly deformed often forming fold structures, which can be observed on a wide range of scales: in core samples, mine galleries, and also in the seismic sections. For our analysis, we select single layer fold trains. Quantitative fold shape analysis is carried out using Fold Geometry Toolbox [3], which allows deciphering the viscosity ratio between anhydrite and salt. The results indicate that anhydrite layer is ca. 10 to 30 times more viscous than the embedding salt. Further, we use the estimated rheological parameters of anhydrite in the numerical analysis of the internal salt dynamics. We solve an incompressible Stokes equation in the presence of the gravity using the finite element method solver MILAMIN [4]. We show that the presence of denser and more viscous anhydrite layers in the tectonically stable regime is insignificant for the internal stability of the salt structures. [1] Chemia, Z., Koyi, H., Schmeling, H. 2008. Numerical modelling of rise and fall of a dense layer in salt diapirs. Geophysical Journal International, 172: 798-816. [2] Muller, W.H., Briegel, U. 1978. The rheological behaviour of polycrystalline Anhydrite. Eclogae Geol. Helv, 71(2): 397-407 [3] Adamuszek M., Schmid D.W., Dabrowski M. 2011. Fold geometry toolbox - Automated determination of fold shape, shortening, and material properties, Journal of Structural Geology, 33: 1406-1416. [4] Dabrowski, M., Krotkiewski, M., and Schmid, D. W. 2008. MILAMIN: MATLAB-based finite element method solver for large problems. Geochemistry Geophysics Geosystems, 9: Q04030.

A Structural Biology and Protein Engineering Approach to the Development of Antidotes against the Inhibition of Human Acetylcholinesterase by OP-based Nerve Agents

DTIC Science & Technology

2014-03-01

for Biotechnology, Gurgaon, India (Sep, 2013) by Joel L. Sussman, title: “Molecular Basis of How Nerve Agents through anti- Alzheimer Drugs Function...Molecular Basis of How Nerve Agents through anti- Alzheimer Drugs Function: 3D Structure of Acetylcholinesterase • Florida International University...FIU), Miami, FL (Dec 2013) - Invited Lecture by Joel L. Sussman, title: “Molecular Basis of anti- Alzheimer Drugs & Nerve Agents: 3D Structure of

Shuttle Orbiter-like Cargo Carrier on Crew Launch Vehicle

NASA Technical Reports Server (NTRS)

Martinovic, Zoran

2009-01-01

The following document summarizes the results of a conceptual design study for which the goal was to investigate the possibility of using a crew launch vehicle to deliver the remaining International Space Station elements should the Space Shuttle orbiter not be available to complete that task. Conceptual designs and structural weight estimates for two designs are presented. A previously developed systematic approach that was based on finite-element analysis and structural sizing was used to estimate growth of structural weight from analytical to "as built" conditions.

Upper third molar internal structural organization and semicircular canal morphology in Plio-Pleistocene South African cercopithecoids.

PubMed

Beaudet, Amélie; Dumoncel, Jean; Thackeray, John Francis; Bruxelles, Laurent; Duployer, Benjamin; Tenailleau, Christophe; Bam, Lunga; Hoffman, Jakobus; de Beer, Frikkie; Braga, José

2016-06-01

Despite the abundance of cercopithecoids in the fossil record, especially in South Africa, and the recent development of morphometric approaches, uncertainties regarding the taxonomic identification of isolated cranio-dental specimens remain. Because cercopithecoids, nearly always found in stratigraphic association with hominin remains in Plio-Pleistocene deposits, are considered as sensitive ecological and chronological biomarkers, a significant effort should be made to clarify their palaeobiodiversity by assessing additional reliable morphological diagnostic criteria. Here we test the relevance of both molar crown internal structure and bony labyrinth morphology for discrimination of fossil cercopithecoid species. We use microtomographic-based 3D virtual imaging and quantitative analyses to investigate tooth endostructural organization and inner ear shape in 29 craniodental specimens from the South African sites of Kromdraai, Makapansgat, Sterkfontein and Swartkrans and provide the first detailed description of the internal structural condition characterizing this Plio-Pleistocene primate assemblage. Our preliminary results show that enamel-dentine junction morphology could be informative for discriminating highly autapomorphic taxa such as Theropithecus, while semicircular canal shape is tentatively proposed as an efficient criterion for diagnosing Dinopithecus ingens. Further research in virtual paleoprimatology may contribute to the identification of unassigned isolated fossil remains and shed new light on the internal craniodental morphology of extinct primate taxa. Copyright © 2016 Elsevier Ltd. All rights reserved.

From molecule to solid: The prediction of organic crystal structures

NASA Astrophysics Data System (ADS)

Dzyabchenko, A. V.

2008-10-01

A method for predicting the structure of a molecular crystal based on the systematic search for a global potential energy minimum is considered. The method takes into account unequal occurrences of the structural classes of organic crystals and symmetry of the multidimensional configuration space. The programs of global minimization PMC, comparison of crystal structures CRYCOM, and approximation to the distributions of the electrostatic potentials of molecules FitMEP are presented as tools for numerically solving the problem. Examples of predicted structures substantiated experimentally and the experience of author’s participation in international tests of crystal structure prediction organized by the Cambridge Crystallographic Data Center (Cambridge, UK) are considered.

Collaborative Educational Experiences through Higher Education-Industry Partnerships

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Hall, Cathy W.

2012-01-01

This paper examines the perceptions of mentors and student interns from NASA's Langley Aerospace Research Summer Scholars (LARSS) program in Hampton, Virginia. Data for the current study are from student interns and mentors participating in the 2010, 10-week summer internship. Students are chosen from around the country based upon their applications and mentoring opportunities to participate in a summer program focusing on a range of specialty areas including: aeronautics; earth science research; exploration and flight; systems and concepts; systems engineering; subsonic/transonic testing; supersonic/hypersonic testing; and structures testing. This study presents information on mentors perceptions of academic preparedness brought to the workplace by student interns; student interns perceptions of how the internship helped develop key skill areas; and self-reports from student interns and their mentors about their internship experience.

A Point Rainfall Generator With Internal Storm Structure

NASA Astrophysics Data System (ADS)

Marien, J. L.; Vandewiele, G. L.

1986-04-01

A point rainfall generator is a probabilistic model for the time series of rainfall as observed in one geographical point. The main purpose of such a model is to generate long synthetic sequences of rainfall for simulation studies. The present generator is a continuous time model based on 13.5 years of 10-min point rainfalls observed in Belgium and digitized with a resolution of 0.1 mm. The present generator attempts to model all features of the rainfall time series which are important for flood studies as accurately as possible. The original aspects of the model are on the one hand the way in which storms are defined and on the other hand the theoretical model for the internal storm characteristics. The storm definition has the advantage that the important characteristics of successive storms are fully independent and very precisely modelled, even on time bases as small as 10 min. The model of the internal storm characteristics has a strong theoretical structure. This fact justifies better the extrapolation of this model to severe storms for which the data are very sparse. This can be important when using the model to simulate severe flood events.

Fear, Honor, Interest: An Analysis of Russia’s Operations in the Near Abroad (2007-2014)

DTIC Science & Technology

2015-05-21

model that reflects the internal structure of a decision-making system. This model delivers an approach of interrelated mechanisms based on history ...Cyber Warfare and the United States.” Denver Journal of International Law and Policy 40 (2012): 620-647 Laruelle, Marlene. “Negotiating History ...Russian minorities in former Soviet states. First, it describes the history of the collapse of the Soviet Union, the fate of the 25 million displaced

Miniature stress transducer has directional capability

NASA Technical Reports Server (NTRS)

San Miguel, A.; Silver, R. H.

1965-01-01

Miniature stress transducer uses a semiconductive piezoresistive element to detect stress only on specific axes. Measurement of internal mass stress is based on the compressive deformation of the transducer. The device is applicable to constant stress monitoring in building and dam structural parts.

Half-metallic ferromagnetism prediction in MoS2-based two-dimensional superlattice from first-principles

NASA Astrophysics Data System (ADS)

Wen, Yan-Ni; Gao, Peng-Fei; Xia, Ming-Gang; Zhang, Sheng-Li

2018-03-01

Half-metallic ferromagnetism (HMFM) has great potential application in spin filter. However, it is extremely rare, especially in two-dimensional (2D) materials. At present, 2D materials have drawn international interest in spintronic devices. Here, we use ab initio density functional theory (DFT) calculations to study the structural stability and electrical and magnetic properties of the MoS2-based 2D superlattice formed by inserting graphene hexagonal ring in 6 × 6 × 1 MoS2 supercell. Two kinds of structures with hexagonal carbon ring were predicted with structural stability and were shown HMFM. The two structures combine the spin transport capacity of graphene with the magnetism of the defective 2D MoS2. And they have strong covalent bonding between the C and S or Mo atoms near the interface. This work is very useful to help us to design reasonable MoS2-based spin filter.

International Psychometric Validation of an EORTC Quality of Life Module Measuring Cancer Related Fatigue (EORTC QLQ-FA12).

PubMed

Weis, Joachim; Tomaszewski, Krzysztof A; Hammerlid, Eva; Ignacio Arraras, Juan; Conroy, Thierry; Lanceley, Anne; Schmidt, Heike; Wirtz, Markus; Singer, Susanne; Pinto, Monica; Alm El-Din, Mohamed; Compter, Inge; Holzner, Bernhard; Hofmeister, Dirk; Chie, Wei-Chu; Czeladzki, Marek; Harle, Amelie; Jones, Louise; Ritter, Sabrina; Flechtner, Hans-Henning; Bottomley, Andrew

2017-05-01

The European Organisation for Research and Treatment of Cancer (EORTC) Group has developed a new multidimensional instrument measuring cancer-related fatigue to be used in conjunction with the quality of life core questionnaire (EORTC QLQ-C30). The module EORTC QLQ-FA13 assesses physical, cognitive, and emotional aspects of cancer-related fatigue. The methodology follows the EORTC guidelines for phase IV validation of modules. This paper focuses on the results of the psychometric validation of the factorial structure of the module. For validation and cross-validation confirmatory factor analysis (maximum likelihood estimation), intraclass correlation and Cronbach alpha for internal consistency were employed. The study involved an international multicenter collaboration of 11 European and non-European countries. A total of 946 patients with various tumor diagnoses were enrolled. Based on the confirmatory factor analysis, we could approve the three-dimensional structure of the module. Removing one item and reassigning the factorial mapping of another item resulted in the EORTC QLQ-FA12. For the revised scale, we found evidence supporting good local (indicator reliability ≥ 0.60, factor reliability ≥ 0.82) and global model fit (GFI t1|t2 = 0.965/0.957, CFI t1|t2 = 0.976/0.972, RMSEA t1|t2 = 0.060/0.069) for both measurement points. For each scale, test-retest reliability proved to be very good (intraclass correlation: R t1-t2 = 0.905-0.921) and internal consistency proved to be good to high (Cronbach alpha = .79-.90). Based on the former phase III module, the multidimensional structure was revised as a phase IV module (EORTC FA12) with an improved scale structure. For a comprehensive validation of the EORTC FA12, further aspects of convergent and divergent validity as well as sensitivity to change should be determined. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Carbon nanopipettes and microtubes for electrochemical sensing and microfluidics

NASA Astrophysics Data System (ADS)

Mani, Radhika C.; Bhimarasetti, Gopinath; Lowe, Randall; Sunkara, Mahendra K.

2004-12-01

We present the synthesis of two novel morphologies for carbon tubular structures: Nanopipettes and Micropipes. The synthesis procedures for both these structures are both unique and different from each other and the conventional methods used for carbon nanotubes. Carbon nanopipettes, open at both ends, are made up of a central nanotube (~10-20 nm) surrounded by helical sheets of graphite. Thus nanopipettes have an outer conical structure, with a base size of about a micron, that narrows down to about 10-20 nm at the tip. Due to their unique morphology, the outer walls of the nanopipettes continuously expose edge planes of graphite, giving a very stable and reversible electrochemical response for detecting neurological compounds such as dopamine. The synthesis of carbon nanopipettes is based on high temperature nucleation and growth of carbon nanotubes under conditions of hydrogen etching during growth. Carbon micropipes, on the other hand, are tubular structures whose internal diameters range from a few nanometers to a few microns with a constant wall thickness of 10-20 nm. In addition to tuning the internal diameters, the conical angles of these structures could also be changed during synthesis. Due to their larger inner diameters and thin walls, both the straight and conical micro-tubular structures are suitable for microfluidic devices such as throttle valves, micro-reactors, and distribution channels. The synthesis of carbon micro-tubular structures is based on the wetting behavior of gallium with carbon during growth. The contact angle between gallium and the carbon wall determines the conical angle of the structure. By varying the contact angle, one can alter the conical angles from 400 to -150, and synthesize straight tubes using different N2/O2 dosing compositions. An 'n-step' dosing sequence at various stages of growth resulted in 'n-staged' morphologies for carbon micro-tubular structures such as funnels, tube-on-cone, Y-junctions and dumbbells.

DSM-IV Personality Disorders and Associations with Externalizing and Internalizing Disorders: Results from the National Epidemiologic Survey on Alcohol and Related Conditions

PubMed Central

Harford, Thomas C.; Chen, Chiung M.; Saha, Tulshi D.; Smith, Sharon M.; Ruan, W. June; Grant, Bridget F.

2013-01-01

Background Although associations between personality disorders and psychiatric disorders are well established in general population studies, their association with liability dimensions for externalizing and internalizing disorders has not been fully assessed. The purpose of this study is to examine associations between personality disorders (PDs) and lifetime externalizing and internalizing Axis I disorders. Methods Data were obtained from the total sample of 34,653 respondents from Wave 2 of the National Epidemiologic Survey on Alcohol and Related Conditions (NESARC). Drawing on the literature, a 3-factor exploratory structural equation model was selected to simultaneously assess the measurement relations among DSM-IV Axis I substance use and mood and anxiety disorders and the structural relations between the latent internalizing-externalizing dimensions and DSM-IV PDs, adjusting for gender, age, race/ethnicity, and marital status. Results Antisocial, histrionic, and borderline PDs were strong predictors for the externalizing factor, while schizotypal, borderline, avoidant, and obsessive-compulsive PDs had significantly larger effects on the internalizing fear factor when compared to the internalizing misery factor. Paranoid, schizoid, narcissistic, and dependent PDs provided limited discrimination between and among the three factors. An overarching latent factor representing general personality dysfunction was significantly greater on the internalizing fear factor followed by the externalizing factor, and weakest for the internalizing misery factor. Conclusion Personality disorders offer important opportunities for studies on the externalizing-internalizing spectrum of common psychiatric disorders. Future studies based on panic, anxiety, and depressive symptoms may elucidate PD associations with the internalizing spectrum of disorders. PMID:23932575

DSM-IV personality disorders and associations with externalizing and internalizing disorders: results from the National Epidemiologic Survey on Alcohol and Related Conditions.

PubMed

Harford, Thomas C; Chen, Chiung M; Saha, Tulshi D; Smith, Sharon M; Ruan, W June; Grant, Bridget F

2013-11-01

Although associations between personality disorders and psychiatric disorders are well established in general population studies, their association with liability dimensions for externalizing and internalizing disorders has not been fully assessed. The purpose of this study is to examine associations between personality disorders (PDs) and lifetime externalizing and internalizing Axis I disorders. Data were obtained from the total sample of 34,653 respondents from Wave 2 of the National Epidemiologic Survey on Alcohol and Related Conditions (NESARC). Drawing on the literature, a 3-factor exploratory structural equation model was selected to simultaneously assess the measurement relations among DSM-IV Axis I substance use and mood and anxiety disorders and the structural relations between the latent internalizing-externalizing dimensions and DSM-IV PDs, adjusting for gender, age, race/ethnicity, and marital status. Antisocial, histrionic, and borderline PDs were strong predictors for the externalizing factor, while schizotypal, borderline, avoidant, and obsessive-compulsive PDs had significantly larger effects on the internalizing fear factor when compared to the internalizing misery factor. Paranoid, schizoid, narcissistic, and dependent PDs provided limited discrimination between and among the three factors. An overarching latent factor representing general personality dysfunction was significantly greater on the internalizing fear factor followed by the externalizing factor, and weakest for the internalizing misery factor. Personality disorders offer important opportunities for studies on the externalizing-internalizing spectrum of common psychiatric disorders. Future studies based on panic, anxiety, and depressive symptoms may elucidate PD associations with the internalizing spectrum of disorders. Published by Elsevier Ltd.

The Effects of Reducing the Structural Mass of the Transit Habitat on the Cryogenic Propellant Required for a Human Phobos Mission

NASA Technical Reports Server (NTRS)

Zipay, John Joseph

2016-01-01

A technique for rapidly determining the relationship between the pressurized volume, structural mass and the cryogenic propellant required to be delivered to Earth orbit for a Mars Transit Habitat is provided. This technique is based on assumptions for the required delta-V's, the Exploration Upper Stage performance and the historical structural masses for human spacecraft from Mercury Program through the International Space Station. If the Mars Transit Habitat is constructed from aluminum, structural mass estimates based on the habitat pressurized volume are accurate to within 15%. Other structural material options for the Mars Transit Habitat are also evaluated. The results show that small, achievable reductions in the structural mass of the Transit Habitat can save tens of thousands of pounds of cryogenic propellant that need to be delivered to Earth orbit for a human Phobos Mission.

The Effects of Reducing the Structural Mass of the Transit Habitat on the Cryogenic Propellant Required for a Human Phobos Mission

NASA Technical Reports Server (NTRS)

Zipay, John J.

2016-01-01

A technique for rapidly determining the relationship between the pressurized volume, structural mass and the cryogenic propellant required to be delivered to Earth orbit for a Mars Transit Habitat is provided. This technique is based on assumptions for the required delta-V's, the Exploration Upper Stage performance and the historical structural masses for human spacecraft from Mercury Program through the International Space Station. If the Mars Transit Habitat is constructed from aluminum, structural mass estimates based on the habitat pressurized volume are accurate to within 15 percent. Other structural material options for the Mars Transit Habitat are also evaluated. The results show that small, achievable reductions in the structural mass of the Transit Habitat can save tens of thousands of pounds of cryogenic propellant that need to be delivered to Earth orbit for a human Phobos Mission.

Three Dimensional Characterization of Typical Urban and Desert Particles: Implications to Particle Optics

NASA Astrophysics Data System (ADS)

Goel, V.; Mishra, S.; Ahlawat, A. S.; Sharma, C.; Kotnala, R. K.

2017-12-01

Aerosol particles are generally considered as chemically homogeneous spheres in the retrieval techniques of ground and space borne observations which is not accurate approach and can lead to erroneous observations. For better simulation of optical and radiative properties of aerosols, a good knowledge of aerosol's morphology, chemical composition and internal structure is essential. Till date, many studies have reported the morphology and chemical composition of particles but very few of them provide internal structure and spatial distribution of different chemical species within the particle. The research on the effect of particle internal structure and its contribution to particle optics is extremely limited. In present work, we characterize the PM10 particles collected form typical arid (the Thar Desert, Rajasthan, India) and typical urban (New Delhi, India) environment using microscopic techniques. The particles were milled several times to investigate their internal structure. The EDS (Energy Dispersive X-ray Spectroscopy) spectra were recorded after each milling to check the variation in the chemical composition. In arid environment, Fe, Ca, C, Al, and Mg rich shell was observed over a Si rich particle whereas in urban environment, shell of Hg, Ag, C and N was observed over a Cu rich particle. Based on the observations, different model shapes [homogenous sphere and spheroid; heterogeneous sphere and spheroid; core shell] have been considered for assessing the associated uncertainties with the routine modeling of optical properties where volume equivalent homogeneous sphere approximation is considered. The details will be discussed during presentation.

Learning about Skeletons and Other Organ Systems of Vertebrate Animals.

ERIC Educational Resources Information Center

Tunnicliffe, Sue Dale; Reiss, Michael

1999-01-01

Describes students' (n=175) understandings of the structure of animal (including human) skeletons and the internal organs found in them. Finds that older students have a better knowledge of animals' internal anatomies, although knowledge of human internal structure is significantly better than knowledge of rat, bird, and fish internal structure.…

Advanced BCD technology with vertical DMOS based on a semi-insulation structure

NASA Astrophysics Data System (ADS)

Kui, Ma; Xinghua, Fu; Jiexin, Lin; Fashun, Yang

2016-07-01

A new semi-insulation structure in which one isolated island is connected to the substrate was proposed. Based on this semi-insulation structure, an advanced BCD technology which can integrate a vertical device without extra internal interconnection structure was presented. The manufacturing of the new semi-insulation structure employed multi-epitaxy and selectively multi-doping. Isolated islands are insulated with the substrate by reverse-biased PN junctions. Adjacent isolated islands are insulated by isolation wall or deep dielectric trenches. The proposed semi-insulation structure and devices fixed in it were simulated through two-dimensional numerical computer simulators. Based on the new BCD technology, a smart power integrated circuit was designed and fabricated. The simulated and tested results of Vertical DMOS, MOSFETs, BJTs, resistors and diodes indicated that the proposed semi-insulation structure is reasonable and the advanced BCD technology is validated. Project supported by the National Natural Science Foundation of China (No. 61464002), the Science and Technology Fund of Guizhou Province (No. Qian Ke He J Zi [2014]2066), and the Dr. Fund of Guizhou University (No. Gui Da Ren Ji He Zi (2013)20Hao).

The relationships between deformation mechanisms and mechanical properties of additively manufactured porous biomaterials.

PubMed

Kadkhodapour, J; Montazerian, H; Darabi, A Ch; Zargarian, A; Schmauder, S

2017-06-01

Modulating deformation mechanism through manipulating morphological parameters of scaffold internal pore architecture provides potential to tailor the overall mechanical properties under physiological loadings. Whereas cells sense local strains, cell differentiation is also impressed by the elastic deformations. In this paper, structure-property relations were developed for Ti6-Al-4V scaffolds designed based on triply periodic minimal surfaces. 10mm cubic scaffolds composed of 5×5×5 unit cells formed of F-RD (bending dominated) and I-WP (stretching dominated) architectures were additively manufactured at different volume fractions and subjected to compressive tests. The first stages of deformation for stretching dominated structure, was accompanied by bilateral layer-by-layer failure of unit cells owing to the buckling of micro-struts, while for bending dominated structure, namely F-RD, global shearing bands appeared since the shearing failure of struts in the internal architecture. Promoted mechanical properties were found for stretching dominated structure since the global orientation of struts were parallel to loading direction while inclination of struts diminished specific properties for bending dominated structure. Moreover, elastic-plastic deformation was computationally studied by applying Johnson-Cook damage model to the voxel-based models in FE analysis. Scaling analysis was performed for mechanical properties with respect to the relative density thereby failure mechanism was correlated to the constants of power law describing mechanical properties. Copyright © 2016 Elsevier Ltd. All rights reserved.

Global industrial impact coefficient based on random walk process and inter-country input-output table

NASA Astrophysics Data System (ADS)

Xing, Lizhi; Dong, Xianlei; Guan, Jun

2017-04-01

Input-output table is very comprehensive and detailed in describing the national economic system with lots of economic relationships, which contains supply and demand information among industrial sectors. The complex network, a theory and method for measuring the structure of complex system, can describe the structural characteristics of the internal structure of the research object by measuring the structural indicators of the social and economic system, revealing the complex relationship between the inner hierarchy and the external economic function. This paper builds up GIVCN-WIOT models based on World Input-Output Database in order to depict the topological structure of Global Value Chain (GVC), and assumes the competitive advantage of nations is equal to the overall performance of its domestic sectors' impact on the GVC. Under the perspective of econophysics, Global Industrial Impact Coefficient (GIIC) is proposed to measure the national competitiveness in gaining information superiority and intermediate interests. Analysis of GIVCN-WIOT models yields several insights including the following: (1) sectors with higher Random Walk Centrality contribute more to transmitting value streams within the global economic system; (2) Half-Value Ratio can be used to measure robustness of open-economy macroeconomics in the process of globalization; (3) the positive correlation between GIIC and GDP indicates that one country's global industrial impact could reveal its international competitive advantage.

Recovering bridge deflections from collocated acceleration and strain measurements

NASA Astrophysics Data System (ADS)

Bell, M.; Ma, T. W.; Xu, N. S.

2015-04-01

In this research, an internal model based method is proposed to estimate the displacement profile of a bridge subjected to a moving traffic load using a combination of acceleration and strain measurements. The structural response is assumed to be within the linear range. The deflection profile is assumed to be dominated by the fundamental mode of the bridge, therefore only requiring knowledge of the first mode. This still holds true under a multiple vehicle loading situation as the high mode shapes don't impact the over all response of the structure. Using the structural modal parameters and partial knowledge of the moving vehicle load, the internal models of the structure and the moving load can be respectively established, which can be used to form an autonomous state-space representation of the system. The structural displacements, velocities, and accelerations are the states of such a system, and it is fully observable when the measured output contains structural accelerations and strains. Reliable estimates of structural displacements are obtained using the standard Kalman filtering technique. The effectiveness and robustness of the proposed method has been demonstrated and evaluated via numerical simulation of a simply supported single span concrete bridge subjected to a moving traffic load.

The Structure of Personality Disorders in Individuals with Posttraumatic Stress Disorder

PubMed Central

Wolf, Erika J.; Miller, Mark W.; Brown, Timothy A.

2015-01-01

Research on the structure of personality disorders (PDs) has relied primarily on exploratory analyses to evaluate trait-based models of the factors underlying the covariation of these disorders. This study used confirmatory factor analysis to evaluate whether a model that included both PD traits and a general personality dysfunction factor would account for the comorbidity of the PDs better than a trait-only model. It also examined if the internalizing/externalizing model of psychopathology, developed previously through research on the structure of Axis I disorders, might similarly account for the covariation of the Axis II disorders in a sample of 245 veterans and non-veterans with posttraumatic stress disorder. Results indicated that the best fitting model was a modified bifactor structure composed of nine lower-order common factors. These factors indexed pathology ranging from aggression to dependency, with the correlations among them accounted for by higher-order Internalizing and Externalizing factors. Further, a general factor, reflecting a construct that we termed boundary disturbance, accounted for additional variance and covariance across nearly all the indicators. The Internalizing, Externalizing, and Boundary Disturbance factors evidenced differential associations with trauma-related covariates. These findings suggest continuity in the underlying structure of psychopathology across DSM-IV Axes I & II and provide empirical evidence of a pervasive, core disturbance in the boundary between self and other across the PDs. PMID:22448802

Internal Structural Design of the Common Research Model Wing Box for Aeroelastic Tailoring

NASA Technical Reports Server (NTRS)

Jutte, Christine V.; Stanford, Bret K.; Wieseman, Carol D.

2015-01-01

This work explores the use of alternative internal structural designs within a full-scale wing box structure for aeroelastic tailoring, with a focus on curvilinear spars, ribs, and stringers. The baseline wing model is a fully-populated, cantilevered wing box structure of the Common Research Model (CRM). Metrics of interest include the wing weight, the onset of dynamic flutter, and the static aeroelastic stresses. Twelve parametric studies alter the number of internal structural members along with their location, orientation, and curvature. Additional evaluation metrics are considered to identify design trends that lead to lighter-weight, aeroelastically stable wing designs. The best designs of the individual studies are compared and discussed, with a focus on weight reduction and flutter resistance. The largest weight reductions were obtained by removing the inner spar, and performance was maintained by shifting stringers forward and/or using curvilinear ribs: 5.6% weight reduction, a 13.9% improvement in flutter speed, but a 3.0% increase in stress levels. Flutter resistance was also maintained using straight-rotated ribs although the design had a 4.2% lower flutter speed than the curved ribs of similar weight and stress levels were higher. For some configurations, the differences between curved and straight ribs were smaller, which provides motivation for future optimization-based studies to fully exploit the trade-offs.

Deep Internal Structure of Mars and the Geophysical Package of Netlander

NASA Technical Reports Server (NTRS)

Lognonne, P.; Giardini, D.; Banerdt, B.; Dehant, V.; Barriot, J. P.; Musmann, G.; Menvielle, M.

2000-01-01

Our present understanding of the interior structure of Mars is mostly based on the interpretation of gravity and rotation data, the chemistry of the SNC (shergottites, nakhlites, chassignites) meteoroids, and a comparison with the much better-known interior structure of the Earth. However geophysical information from previous missions have been insufficient to determine the deep internal structure of the planet. Therefore the state and size of the core and the depth and type of mantle discontinuities are unknown. Most previous seismic experiments have indeed failed, either due to a launch failure (as for the Optimism seismometer onboard the small surface stations of Mars 96) or after failure on Mars (as for the Viking 1 seismometer). The remaining Viking 2 seismometer did not produce a convincing marsquake detection, basically due to too strong wind sensitivity and too low resolution in the teleseismic frequency band. After almost a decade of continuous activity and proposals, the first network mission to Mars, NetLander (NL), is expected to be launched between 2005 and 2007. One of the main scientific objectives of this four-lander network mission will be the determination of the internal structure of the planet using a geophysical package. This package will have a seismometer, a magnetometer, and a geodetic experiment, allowing a complementary approach that will yield many new constraints on the mineralogy and temperature of the mantle and core of the planet.

A cluster-based approach to selecting representative stimuli from the International Affective Picture System (IAPS) database.

PubMed

Constantinescu, Alexandra C; Wolters, Maria; Moore, Adam; MacPherson, Sarah E

2017-06-01

The International Affective Picture System (IAPS; Lang, Bradley, & Cuthbert, 2008) is a stimulus database that is frequently used to investigate various aspects of emotional processing. Despite its extensive use, selecting IAPS stimuli for a research project is not usually done according to an established strategy, but rather is tailored to individual studies. Here we propose a standard, replicable method for stimulus selection based on cluster analysis, which re-creates the group structure that is most likely to have produced the valence arousal, and dominance norms associated with the IAPS images. Our method includes screening the database for outliers, identifying a suitable clustering solution, and then extracting the desired number of stimuli on the basis of their level of certainty of belonging to the cluster they were assigned to. Our method preserves statistical power in studies by maximizing the likelihood that the stimuli belong to the cluster structure fitted to them, and by filtering stimuli according to their certainty of cluster membership. In addition, although our cluster-based method is illustrated using the IAPS, it can be extended to other stimulus databases.

Measurement and simulation of the relatively competitive advantages and weaknesses between economies based on bipartite graph theory.

PubMed

Guan, Jun; Xu, Xiaoyu; Wu, Shan; Xing, Lizhi

2018-01-01

The input-output table is very comprehensive and detailed in describing the national economic systems with abundant economic relationships, which contain supply and demand information among various industrial sectors. The complex network, a theory, and method for measuring the structure of a complex system can depict the structural characteristics of the internal structure of the researched object by measuring the structural indicators of the social and economic systems, revealing the complex relationships between the inner hierarchies and the external economic functions. In this paper, functions of industrial sectors on the global value chain are to be distinguished with bipartite graph theory, and inter-sector competitive relationships are to be extracted through resource allocation process. Furthermore, quantitative analysis indices will be proposed under the perspective of a complex network, which will be used to bring about simulations on the variation tendencies of economies' status in different situations of commercial intercourses. Finally, a new econophysics analytical framework of international trade is to be established.

Hierarchical Structure and Cross-Cultural Measurement Invariance of the Norwegian Version of the Personality Inventory for DSM-5.

PubMed

Thimm, Jens C; Jordan, Stian; Bach, Bo

2017-01-01

The Personality Inventory for DSM-5 (PID-5) was created to aid a trait-based diagnostic system for personality disorders (PDs) in the Diagnostic and Statistical Manual of Mental Disorders (5th ed. [DSM-5]; American Psychiatric Association, 2013a ). In this study, we aimed to evaluate the Norwegian version of the PID-5 by examining its score reliability, hierarchical structure, congruency with international findings, and cross-cultural measurement invariance with a matched U.S. For this purpose, 503 university students (76% females) were administered the PID-5. The Norwegian PID-5 showed good score reliability and structural validity from 1 to 5 factors. The 5-factor structure was generally congruent with international findings, and support for measurement invariance across the Norwegian and a matched U.S. sample was found. Conclusively, the results indicate that scores on the Norwegian PID-5 have sound psychometric properties, which are substantially comparable with the original U.S. version, supporting its use in a Norwegian population.

Measurement and simulation of the relatively competitive advantages and weaknesses between economies based on bipartite graph theory

PubMed Central

Guan, Jun; Xu, Xiaoyu; Wu, Shan

2018-01-01

The input-output table is very comprehensive and detailed in describing the national economic systems with abundant economic relationships, which contain supply and demand information among various industrial sectors. The complex network, a theory, and method for measuring the structure of a complex system can depict the structural characteristics of the internal structure of the researched object by measuring the structural indicators of the social and economic systems, revealing the complex relationships between the inner hierarchies and the external economic functions. In this paper, functions of industrial sectors on the global value chain are to be distinguished with bipartite graph theory, and inter-sector competitive relationships are to be extracted through resource allocation process. Furthermore, quantitative analysis indices will be proposed under the perspective of a complex network, which will be used to bring about simulations on the variation tendencies of economies’ status in different situations of commercial intercourses. Finally, a new econophysics analytical framework of international trade is to be established. PMID:29813083

Detection of bondline delaminations in multilayer structures with lossy components

NASA Technical Reports Server (NTRS)

Madaras, Eric I.; Winfree, William P.; Smith, B. T.; Heyman, Joseph H.

1988-01-01

The detection of bondline delaminations in multilayer structures using ultrasonic reflection techniques is a generic problem in adhesively bonded composite structures such as the Space Shuttles's Solid Rocket Motors (SRM). Standard pulse echo ultrasonic techniques do not perform well for a composite resonator composed of a resonant layer combined with attenuating layers. Excessive ringing in the resonant layer tends to mask internal echoes emanating from the attenuating layers. The SRM is made up of a resonant steel layer backed by layers of adhesive, rubber, liner and fuel, which are ultrasonically attenuating. The structure's response is modeled as a lossy ultrasonic transmission line. The model predicts that the acoustic response of the system is sensitive to delaminations at the interior bondlines in a few narrow frequency bands. These predictions are verified by measurements on a fabricated system. Successful imaging of internal delaminations is sensitive to proper selection of the interrogating frequency. Images of fabricated bondline delaminations are presented based on these studies.

A class of systolizable IIR digital filters and its design for proper scaling and minimum output roundoff noise

NASA Technical Reports Server (NTRS)

Lei, Shaw-Min; Yao, Kung

1990-01-01

A class of infinite impulse response (IIR) digital filters with a systolizable structure is proposed and its synthesis is investigated. The systolizable structure consists of pipelineable regular modules with local connections and is suitable for VLSI implementation. It is capable of achieving high performance as well as high throughput. This class of filter structure provides certain degrees of freedom that can be used to obtain some desirable properties for the filter. Techniques of evaluating the internal signal powers and the output roundoff noise of the proposed filter structure are developed. Based upon these techniques, a well-scaled IIR digital filter with minimum output roundoff noise is designed using a local optimization approach. The internal signals of all the modes of this filter are scaled to unity in the l2-norm sense. Compared to the Rao-Kailath (1984) orthogonal digital filter and the Gray-Markel (1973) normalized-lattice digital filter, this filter has better scaling properties and lower output roundoff noise.

Improving the Accuracy of Structural Fatigue Life Tracking Through Dynamic Strain Sensor Calibration

DTIC Science & Technology

2011-09-01

strength corrosion resistant 7075 -T6 alloy, and included hinge lugs, a bulkhead, spars, and wing skins that were fastened together using welds, rivets...release, distribution unlimited 13. SUPPLEMENTARY NOTES See also ADA580921. International Workshop on Structural Health Monitoring: From Condition -based...greater than 10% under the same loading conditions [1]. These differences must be accounted for to have acceptable accuracy levels in the ultimate

Nonlinear dynamic systems identification using recurrent interval type-2 TSK fuzzy neural network - A novel structure.

PubMed

El-Nagar, Ahmad M

2018-01-01

In this study, a novel structure of a recurrent interval type-2 Takagi-Sugeno-Kang (TSK) fuzzy neural network (FNN) is introduced for nonlinear dynamic and time-varying systems identification. It combines the type-2 fuzzy sets (T2FSs) and a recurrent FNN to avoid the data uncertainties. The fuzzy firing strengths in the proposed structure are returned to the network input as internal variables. The interval type-2 fuzzy sets (IT2FSs) is used to describe the antecedent part for each rule while the consequent part is a TSK-type, which is a linear function of the internal variables and the external inputs with interval weights. All the type-2 fuzzy rules for the proposed RIT2TSKFNN are learned on-line based on structure and parameter learning, which are performed using the type-2 fuzzy clustering. The antecedent and consequent parameters of the proposed RIT2TSKFNN are updated based on the Lyapunov function to achieve network stability. The obtained results indicate that our proposed network has a small root mean square error (RMSE) and a small integral of square error (ISE) with a small number of rules and a small computation time compared with other type-2 FNNs. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Dataset for Reporting of Malignant Mesothelioma of the Pleura or Peritoneum: Recommendations From the International Collaboration on Cancer Reporting (ICCR).

PubMed

Churg, Andrew; Attanoos, Richard; Borczuk, Alain C; Chirieac, Lucian R; Galateau-Sallé, Françoise; Gibbs, Allen; Henderson, Douglas; Roggli, Victor; Rusch, Valerie; Judge, Meagan J; Srigley, John R

2016-10-01

-The International Collaboration on Cancer Reporting is a not-for-profit organization formed by the Royal Colleges of Pathologists of Australasia and the United Kingdom; the College of American Pathologists; the Canadian Association of Pathologists-Association Canadienne des Pathologists, in association with the Canadian Partnership Against Cancer; and the European Society of Pathology. Its goal is to produce common, internationally agreed upon, evidence-based datasets for use throughout the world. -To describe a dataset developed by the Expert Panel of the International Collaboration on Cancer Reporting for reporting malignant mesothelioma of both the pleura and peritoneum. The dataset is composed of "required" (mandatory) and "recommended" (nonmandatory) elements. -Based on a review of the most recent evidence and supported by explanatory commentary. -Eight required elements and 7 recommended elements were agreed upon by the Expert Panel to represent the essential information for reporting malignant mesothelioma of the pleura and peritoneum. -In time, the widespread use of an internationally agreed upon, structured, pathology dataset for mesothelioma will lead not only to improved patient management but also provide valuable data for research and international benchmarks.

Development and Application of a Structural Health Monitoring System Based on Wireless Smart Aggregates

PubMed Central

Ma, Haoyan; Li, Peng; Song, Gangbing; Wu, Jianxin

2017-01-01

Structural health monitoring (SHM) systems can improve the safety and reliability of structures, reduce maintenance costs, and extend service life. Research on concrete SHMs using piezoelectric-based smart aggregates have reached great achievements. However, the newly developed techniques have not been widely applied in practical engineering, largely due to the wiring problems associated with large-scale structural health monitoring. The cumbersome wiring requires much material and labor work, and more importantly, the associated maintenance work is also very heavy. Targeting a practical large scale concrete crack detection (CCD) application, a smart aggregates-based wireless sensor network system is proposed for the CCD application. The developed CCD system uses Zigbee 802.15.4 protocols, and is able to perform dynamic stress monitoring, structural impact capturing, and internal crack detection. The system has been experimentally validated, and the experimental results demonstrated the effectiveness of the proposed system. This work provides important support for practical CCD applications using wireless smart aggregates. PMID:28714927

Development and Application of a Structural Health Monitoring System Based on Wireless Smart Aggregates.

PubMed

Yan, Shi; Ma, Haoyan; Li, Peng; Song, Gangbing; Wu, Jianxin

2017-07-17

Structural health monitoring (SHM) systems can improve the safety and reliability of structures, reduce maintenance costs, and extend service life. Research on concrete SHMs using piezoelectric-based smart aggregates have reached great achievements. However, the newly developed techniques have not been widely applied in practical engineering, largely due to the wiring problems associated with large-scale structural health monitoring. The cumbersome wiring requires much material and labor work, and more importantly, the associated maintenance work is also very heavy. Targeting a practical large scale concrete crack detection (CCD) application, a smart aggregates-based wireless sensor network system is proposed for the CCD application. The developed CCD system uses Zigbee 802.15.4 protocols, and is able to perform dynamic stress monitoring, structural impact capturing, and internal crack detection. The system has been experimentally validated, and the experimental results demonstrated the effectiveness of the proposed system. This work provides important support for practical CCD applications using wireless smart aggregates.

Computer Game

NASA Technical Reports Server (NTRS)

1992-01-01

Using NASA studies of advanced lunar exploration and colonization, KDT Industries, Inc. and Wesson International have developed MOONBASE, a computer game. The player, or team commander, must build and operate a lunar base using NASA technology. He has 10 years to explore the surface, select a site and assemble structures brought from Earth into an efficient base. The game was introduced in 1991 by Texas Space Grant Consortium.

Investigating the Link between Self Directed Learning Readiness and Project-Based Learning Outcomes: The Case of International Masters Students in an Engineering Management Course

ERIC Educational Resources Information Center

Stewart, Rodney A.

2007-01-01

Modern learning approaches increasingly have fewer structured learning activities and more self-directed learning tasks guided through consultation with academics. Such tasks are predominately project-/problem-based where the student is required to follow a freely guided road map to self discovery while simultaneously achieving desired learning…

Evidence-Based Conclusions Concerning Practice, Curriculum Design and Curriculum Reform in a Civil Engineering Capstone Design Course in Hong Kong

ERIC Educational Resources Information Center

Chan, Cecilia K. Y.; Wong, George C. K.; Law, Ada K. H.; Zhang, T.; Au, Francis T. K.

2017-01-01

This study aimed to provide evidence-based conclusions from students concerning a capstone-design course in a civil engineering programme in Hong Kong. The evidence was generated by designing a student-experience questionnaire. The questionnaire instrument was assessed for internal consistency in four scales (curriculum and structure changes;…

FinalReport-DOE BES DMSE-UNR-QLi

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Qizhen

The primary goal of this project is to explore the fundamental deformation and failure mechanisms for magnesium with a hexagonal close packed (HCP) crystal structure. It is critical to perform this project for a number of reasons. First, magnesium is the lightest structural metal and its application in various structural components can save the final component weight. Second, the weight reduction from the usage of magnesium-based structural components in transportation vehicles such as automobiles and aircrafts can improve fuel efficiency and reduce the greenhouse gas emissions. Third, structural components often experience dynamic loading such as cyclic loading conditions. Fourth, magnesiummore » with a HCP crystal structure generally has its special deformation responses under loading conditions. This project investigated magnesium based materials (magnesium single crystal, pure polycrystalline magnesium, and some magnesium alloys) under various loading conditions, and also explored some processing routes to manipulate the microstructure and mechanical properties of magnesium. The research results were published in a number of articles and also disseminated through presentations in various conferences such as TMS annual meetings, MRS meetings, the international Plasticity conferences, the Pacific Rim International Congress on Advanced Materials and Processing, and AeroMat. In addition to the contribution to the research/academic community, this project is also beneficial to the general public. With the actual usage of magnesium in the passenger cars, the weight reduction and fuel consumption reduction will save the fuel bill of individual owners.« less

Topology optimization analysis based on the direct coupling of the boundary element method and the level set method

NASA Astrophysics Data System (ADS)

Vitório, Paulo Cezar; Leonel, Edson Denner

2017-12-01

The structural design must ensure suitable working conditions by attending for safe and economic criteria. However, the optimal solution is not easily available, because these conditions depend on the bodies' dimensions, materials strength and structural system configuration. In this regard, topology optimization aims for achieving the optimal structural geometry, i.e. the shape that leads to the minimum requirement of material, respecting constraints related to the stress state at each material point. The present study applies an evolutionary approach for determining the optimal geometry of 2D structures using the coupling of the boundary element method (BEM) and the level set method (LSM). The proposed algorithm consists of mechanical modelling, topology optimization approach and structural reconstruction. The mechanical model is composed of singular and hyper-singular BEM algebraic equations. The topology optimization is performed through the LSM. Internal and external geometries are evolved by the LS function evaluated at its zero level. The reconstruction process concerns the remeshing. Because the structural boundary moves at each iteration, the body's geometry change and, consequently, a new mesh has to be defined. The proposed algorithm, which is based on the direct coupling of such approaches, introduces internal cavities automatically during the optimization process, according to the intensity of Von Mises stress. The developed optimization model was applied in two benchmarks available in the literature. Good agreement was observed among the results, which demonstrates its efficiency and accuracy.

[Study of the appearance difference of lower complete denture between functional and anatomic impression techniques].

PubMed

Zhong, Qun; Wu, Xue-yin; Shen, Qing-yi; Shen, Qing-ping

2012-04-01

To compare the difference in oblique external ridge, oblique internal ridge and alveolar process crest of lower complete denture base made through functional impression and anatomic impression techniques. Fifteen patients were chosen to treat with two kinds of complete dentures through functional impression and anatomic impression technique respectively. 3D laser scanner was used to scan the three-dimensional model of the denture base and the differences of the surface structural between two techniques in alveolar process crest, external and internal oblique ridges were analyzed, using paired t test with SPSS 12.0 software package. Between the two techniques, there were significant differences in the areas of internal and external oblique ridge(P<0.01); there was no significant difference in the main support areas(P>0.05). The results explain why there is less tenderness when functional impression technique is applied. The differences measured also indicate that sufficient buffering should be made in external and internal oblique ridge areas in clinic.

The role of internal duplication in the evolution of multi-domain proteins.

PubMed

Nacher, J C; Hayashida, M; Akutsu, T

2010-08-01

Many proteins consist of several structural domains. These multi-domain proteins have likely been generated by selective genome growth dynamics during evolution to perform new functions as well as to create structures that fold on a biologically feasible time scale. Domain units frequently evolved through a variety of genetic shuffling mechanisms. Here we examine the protein domain statistics of more than 1000 organisms including eukaryotic, archaeal and bacterial species. The analysis extends earlier findings on asymmetric statistical laws for proteome to a wider variety of species. While proteins are composed of a wide range of domains, displaying a power-law decay, the computation of domain families for each protein reveals an exponential distribution, characterizing a protein universe composed of a thin number of unique families. Structural studies in proteomics have shown that domain repeats, or internal duplicated domains, represent a small but significant fraction of genome. In spite of its importance, this observation has been largely overlooked until recently. We model the evolutionary dynamics of proteome and demonstrate that these distinct distributions are in fact rooted in an internal duplication mechanism. This process generates the contemporary protein structural domain universe, determines its reduced thickness, and tames its growth. These findings have important implications, ranging from protein interaction network modeling to evolutionary studies based on fundamental mechanisms governing genome expansion.

VK-phantom male with 583 structures and female with 459 structures, based on the sectioned images of a male and a female, for computational dosimetry

PubMed Central

Park, Jin Seo; Jung, Yong Wook; Choi, Hyung-Do; Lee, Ae-Kyoung

2018-01-01

Abstract The anatomical structures in most phantoms are classified according to tissue properties rather than according to their detailed structures, because the tissue properties, not the detailed structures, are what is considered important. However, if a phantom does not have detailed structures, the phantom will be unreliable because different tissues can be regarded as the same. Thus, we produced the Visible Korean (VK) -phantoms with detailed structures (male, 583 structures; female, 459 structures) based on segmented images of the whole male body (interval, 1.0 mm; pixel size, 1.0 mm2) and the whole female body (interval, 1.0 mm; pixel size, 1.0 mm2), using house-developed software to analyze the text string and voxel information for each of the structures. The density of each structure in the VK-phantom was calculated based on Virtual Population and a publication of the International Commission on Radiological Protection. In the future, we will standardize the size of each structure in the VK-phantoms. If the VK-phantoms are standardized and the mass density of each structure is precisely known, researchers will be able to measure the exact absorption rate of electromagnetic radiation in specific organs and tissues of the whole body. PMID:29659988

VK-phantom male with 583 structures and female with 459 structures, based on the sectioned images of a male and a female, for computational dosimetry.

PubMed

Park, Jin Seo; Jung, Yong Wook; Choi, Hyung-Do; Lee, Ae-Kyoung

2018-05-01

The anatomical structures in most phantoms are classified according to tissue properties rather than according to their detailed structures, because the tissue properties, not the detailed structures, are what is considered important. However, if a phantom does not have detailed structures, the phantom will be unreliable because different tissues can be regarded as the same. Thus, we produced the Visible Korean (VK) -phantoms with detailed structures (male, 583 structures; female, 459 structures) based on segmented images of the whole male body (interval, 1.0 mm; pixel size, 1.0 mm2) and the whole female body (interval, 1.0 mm; pixel size, 1.0 mm2), using house-developed software to analyze the text string and voxel information for each of the structures. The density of each structure in the VK-phantom was calculated based on Virtual Population and a publication of the International Commission on Radiological Protection. In the future, we will standardize the size of each structure in the VK-phantoms. If the VK-phantoms are standardized and the mass density of each structure is precisely known, researchers will be able to measure the exact absorption rate of electromagnetic radiation in specific organs and tissues of the whole body.

Rational design of reconfigurable prismatic architected materials

NASA Astrophysics Data System (ADS)

Bertoldi, Katia; Overvelde, Johannes; Hoberman, Chuck; Weaver, James

Advances in fabrication technologies are enabling the production of architected materials with unprecedented properties. While most of these materials are characterized by a fixed geometry,an intriguing avenue is to incorporate internal mechanisms capable of recon_guring their spatial architecture, therefore enabling tunable functionality. Inspired by the structural diversity and foldability of the prismatic geometries that can be constructed using the snapology origami-technique, here we introduce a robust design strategy based on space-filling polyhedra to create 3D reconfigurable materials comprising a periodic assembly of rigid plates and elastic hinges. Guided by numerical analysis and physical prototypes, we systematically explore the mobility of the designed structures and identify a wide range of qualitatively di_erent deformations and internal rearrangements. Given that the underlying principles are scale-independent, our strategy can be applied to design the next generation of reconfigurable structures and materials, ranging from transformable meter-scale architectures to nanoscale tunable photonic systems..

A Future-Oriented, Globally Based Curriculum Model for Industrial Technology.

ERIC Educational Resources Information Center

Hacker, Michael

1982-01-01

Presents a future-oriented curriculum approach for industrial technology programs. Major global issues provide the basic structure for curriculum development. These issues include energy management, resource management, technological advancement, and international relations. Rationales for industrial technology are discussed and a curriculum…

Adaptation and validation of the Evidence-Based Practice Belief and Implementation scales for French-speaking Swiss nurses and allied healthcare providers.

PubMed

Verloo, Henk; Desmedt, Mario; Morin, Diane

2017-09-01

To evaluate two psychometric properties of the French versions of the Evidence-Based Practice Beliefs and Evidence-Based Practice Implementation scales, namely their internal consistency and construct validity. The Evidence-Based Practice Beliefs and Evidence-Based Practice Implementation scales developed by Melnyk et al. are recognised as valid, reliable instruments in English. However, no psychometric validation for their French versions existed. Secondary analysis of a cross sectional survey. Source data came from a cross-sectional descriptive study sample of 382 nurses and other allied healthcare providers. Cronbach's alpha was used to evaluate internal consistency, and principal axis factor analysis and varimax rotation were computed to determine construct validity. The French Evidence-Based Practice Beliefs and Evidence-Based Practice Implementation scales showed excellent reliability, with Cronbach's alphas close to the scores established by Melnyk et al.'s original versions. Principal axis factor analysis showed medium-to-high factor loading scores without obtaining collinearity. Principal axis factor analysis with varimax rotation of the 16-item Evidence-Based Practice Beliefs scale resulted in a four-factor loading structure. Principal axis factor analysis with varimax rotation of the 17-item Evidence-Based Practice Implementation scale revealed a two-factor loading structure. Further research should attempt to understand why the French Evidence-Based Practice Implementation scale showed a two-factor loading structure but Melnyk et al.'s original has only one. The French versions of the Evidence-Based Practice Beliefs and Evidence-Based Practice Implementation scales can both be considered valid and reliable instruments for measuring Evidence-Based Practice beliefs and implementation. The results suggest that the French Evidence-Based Practice Beliefs and Evidence-Based Practice Implementation scales are valid and reliable and can therefore be used to evaluate the effectiveness of organisational strategies aimed at increasing professionals' confidence in Evidence-Based Practice, supporting its use and implementation. © 2017 John Wiley & Sons Ltd.

46 CFR 91.40-3 - Drydock examination, internal structural examination, cargo tank internal examination, and...

Code of Federal Regulations, 2010 CFR

2010-10-01

... hull barge with internal framing 1 Double hull barge with external framing 2 Single hull barge with..., ends, and bottoms) when the structural framing is on the internal tank surface. 2 Applicable to double hull tank barges (double sides, ends, and bottoms) when the structural framing is on the external tank...

[A network to promote health systems based on primary health care in the Region of the Americas].

PubMed

Herrera Vázquez, María Magdalena; Rodríguez Avila, Nuria; Nebot Adell, Carme; Montenegro, Hernán

2007-05-01

To identify the relational components of an international network of organizations that provide technical and financial assistance to promote the development of health systems based on primary health care in the countries of the Region of the Americas; to analyze the linkages that would allow the collaborating partners of the Pan American Health Organization (PAHO) to work together on health issues; and to determine the basic theoretical elements that can help to develop action strategies that support advocacy efforts by a network. This was a qualitative and quantitative cross-sectional study based on identifying key informants and on analyzing social networks. Ethnographic and relational information from 46 international organizations was collected through a self-administered semistructured questionnaire. From 46 international health cooperation organizations, 29 decision makers from 29 organizations participated (63.0% response rate). The structure and the strength of the network was evaluated in terms of density, closeness, clustering, and centralization. The statistical analysis was done using computer programs that included UCINET, Pajek, and Microsoft Access. We found a structurally centralized theoretical network, whose nodes were clustered into four central subgroups linked by a shared vision. The leadership, influence, and political interests reflected the formal and technical-cooperation linkages, the formal support for health systems based on primary health care, and the flow of resources being more often technical ones than financial ones. The interorganizational relational components and the social-action ties that were identified could help in the development and consolidation of a thematic network for advocacy and for the management of technical and financial assistance that supports primary health care in the Americas. The linkages for joint action that were identified could advance international cooperation in developing health systems based on primary health care, once PAHO formulates clear implementation strategies and takes a leadership position in mobilizing financial resources and in creating informal and interpersonal linkages for action.

Modeling ready biodegradability of fragrance materials.

PubMed

Ceriani, Lidia; Papa, Ester; Kovarich, Simona; Boethling, Robert; Gramatica, Paola

2015-06-01

In the present study, quantitative structure activity relationships were developed for predicting ready biodegradability of approximately 200 heterogeneous fragrance materials. Two classification methods, classification and regression tree (CART) and k-nearest neighbors (kNN), were applied to perform the modeling. The models were validated with multiple external prediction sets, and the structural applicability domain was verified by the leverage approach. The best models had good sensitivity (internal ≥80%; external ≥68%), specificity (internal ≥80%; external 73%), and overall accuracy (≥75%). Results from the comparison with BIOWIN global models, based on group contribution method, show that specific models developed in the present study perform better in prediction than BIOWIN6, in particular for the correct classification of not readily biodegradable fragrance materials. © 2015 SETAC.

Analytical model of cracking due to rebar corrosion expansion in concrete considering the structure internal force

NASA Astrophysics Data System (ADS)

Lin, Xiangyue; Peng, Minli; Lei, Fengming; Tan, Jiangxian; Shi, Huacheng

2017-12-01

Based on the assumptions of uniform corrosion and linear elastic expansion, an analytical model of cracking due to rebar corrosion expansion in concrete was established, which is able to consider the structure internal force. And then, by means of the complex variable function theory and series expansion technology established by Muskhelishvili, the corresponding stress component functions of concrete around the reinforcement were obtained. Also, a comparative analysis was conducted between the numerical simulation model and present model in this paper. The results show that the calculation results of both methods were consistent with each other, and the numerical deviation was less than 10%, proving that the analytical model established in this paper is reliable.

INTERMARS: User-controlled international management system

NASA Technical Reports Server (NTRS)

Schmitt, Harrison H.

1986-01-01

Existing international space law as well as the best interest of all nations are consistent with the establishment of a user-based international organization, herein called INTERMARS. INTERMARS would provide access to facilities and services at a Martian base which would be of high functional potential, quality, safety, and reliability. These opportunities would be available on an open and nondiscriminatory basis to all peaceful users and investors. INTERMARS is a model organization concept tailored to provide cooperative international management of a Martian base for the benefit of its members, users, and investors. Most importantly, INTERMARS would provide such management through a sharing of both sovereignty and opportunity rather then unilateral control by any one nation or set of competing nations. Through an Assembly of Parties, a Board of Governors, a Board of Users and Investors, and a Director General, INTERMARS would meet its primary goal as it would be in the self-interest of all members, users, and investors to do so. The internal structure and philosophy of INTERMARS would provide not only for all participants to have representation in decisions affecting its activities, but also would insure effective and responsive management. Surely this is the precedent wished for, to establish for mankind at the now not-so-distant shores of the new ocean of space.

Hierarchical structures consisting of SiO2 nanorods and p-GaN microdomes for efficiently harvesting solar energy for InGaN quantum well photovoltaic cells.

PubMed

Ho, Cheng-Han; Lien, Der-Hsien; Chang, Hung-Chih; Lin, Chin-An; Kang, Chen-Fang; Hsing, Meng-Kai; Lai, Kun-Yu; He, Jr-Hau

2012-12-07

We experimentally and theoretically demonstrated the hierarchical structure of SiO(2) nanorod arrays/p-GaN microdomes as a light harvesting scheme for InGaN-based multiple quantum well solar cells. The combination of nano- and micro-structures leads to increased internal multiple reflection and provides an intermediate refractive index between air and GaN. Cells with the hierarchical structure exhibit improved short-circuit current densities and fill factors, rendering a 1.47 fold efficiency enhancement as compared to planar cells.

Entropy model of dissipative structure on corporate social responsibility

NASA Astrophysics Data System (ADS)

Li, Zuozhi; Jiang, Jie

2017-06-01

Enterprise is prompted to fulfill the social responsibility requirement by the internal and external environment. In this complex system, some studies suggest that firms have an orderly or chaotic entropy exchange behavior. Based on the theory of dissipative structure, this paper constructs the entropy index system of corporate social responsibility(CSR) and explores the dissipative structure of CSR through Brusselator model criterion. Picking up listed companies of the equipment manufacturing, the research shows that CSR has positive incentive to negative entropy and promotes the stability of dissipative structure. In short, the dissipative structure of CSR has a positive impact on the interests of stakeholders and corporate social images.

Factor structure and internal reliability of an exercise health belief model scale in a Mexican population.

PubMed

Villar, Oscar Armando Esparza-Del; Montañez-Alvarado, Priscila; Gutiérrez-Vega, Marisela; Carrillo-Saucedo, Irene Concepción; Gurrola-Peña, Gloria Margarita; Ruvalcaba-Romero, Norma Alicia; García-Sánchez, María Dolores; Ochoa-Alcaraz, Sergio Gabriel

2017-03-01

Mexico is one of the countries with the highest rates of overweight and obesity around the world, with 68.8% of men and 73% of women reporting both. This is a public health problem since there are several health related consequences of not exercising, like having cardiovascular diseases or some types of cancers. All of these problems can be prevented by promoting exercise, so it is important to evaluate models of health behaviors to achieve this goal. Among several models the Health Belief Model is one of the most studied models to promote health related behaviors. This study validates the first exercise scale based on the Health Belief Model (HBM) in Mexicans with the objective of studying and analyzing this model in Mexico. Items for the scale called the Exercise Health Belief Model Scale (EHBMS) were developed by a health research team, then the items were applied to a sample of 746 participants, male and female, from five cities in Mexico. The factor structure of the items was analyzed with an exploratory factor analysis and the internal reliability with Cronbach's alpha. The exploratory factor analysis reported the expected factor structure based in the HBM. The KMO index (0.92) and the Barlett's sphericity test (p < 0.01) indicated an adequate and normally distributed sample. Items had adequate factor loadings, ranging from 0.31 to 0.92, and the internal consistencies of the factors were also acceptable, with alpha values ranging from 0.67 to 0.91. The EHBMS is a validated scale that can be used to measure exercise based on the HBM in Mexican populations.

Internal insulation system development

NASA Technical Reports Server (NTRS)

Gille, J. P.

1973-01-01

The development of an internal insulation system for cryogenic liquids is described. The insulation system is based on a gas layer concept in which capillary or surface tension effects are used to maintain a stable gas layer within a cellular core structure between the tank wall and the contained cryogen. In this work, a 1.8 meter diameter tank was insulated and tested with liquid hydrogen. Ability to withstand cycling of the aluminum tank wall to 450 K was a design and test condition.

A theory of viscoplasticity accounting for internal damage

NASA Technical Reports Server (NTRS)

Freed, A. D.; Robinson, D. N.

1988-01-01

A constitutive theory for use in structural and durability analyses of high temperature isotropic alloys is presented. Constitutive equations based upon a potential function are determined from conditions of stability and physical considerations. The theory is self-consistent; terms are not added in an ad hoc manner. It extends a proven viscoplastic model by introducing the Kachanov-Rabotnov concept of net stress. Material degradation and inelastic deformation are unified; they evolve simultaneously and interactively. Both isotropic hardening and material degradation evolve with dissipated work which is the sum of inelastic work and internal work. Internal work is a continuum measure of the stored free energy resulting from inelastic deformation.

Sombrero-shaped plasmonic nanoparticles with molecular-level sensitivity and multifunctionality.

PubMed

Wi, Jung-Sub; Barnard, Edward S; Wilson, Robert J; Zhang, Mingliang; Tang, Mary; Brongersma, Mark L; Wang, Shan X

2011-08-23

We demonstrate top-down synthesis of monodisperse plasmonic nanoparticles designed to contain internal Raman hot spots. Our Raman-active nanoparticles are fabricated using nanoimprint lithography and thin-film deposition and are composed of novel internal structures with sublithographic dimensions: a disk-shaped Ag core, a Petri-dish-shaped SiO(2) base whose inner surface is coated with Ag film, and a sub-10 nm scale circular gap between the core and the base. Confocal Raman measurements and electromagnetic simulations show that Raman hot spots appear at the inside perimeter of individual nanoparticles and serve as the source of a 1000-fold improvement of minimum molecular detection level that enables detection of signals from a few molecules near hot spots. A multimodality version of these nanoparticles, which includes the functionality offered by magnetic multilayers, is also demonstrated. These results illustrate the potential of direct fabrication for creating exotic monodisperse nanoparticles, which combine engineered internal nanostructures and multilayer composite materials, for use in nanoparticle-based molecular imaging and detection. © 2011 American Chemical Society

Study of structure defect interactions in aluminum by the acoustic method. [internal friction in pure aluminum

NASA Technical Reports Server (NTRS)

Nicolaescu, I. I.

1974-01-01

Using echo pulse and resonance rod methods, internal friction in pure aluminum was studied as a function of frequency, hardening temperature, time (internal friction relaxation) and impurity content. These studies led to the conclusion that internal friction in these materials depends strongly on dislocation structure and on elastic interactions between structure defects. It was found experimentally that internal friction relaxation depends on the cooling rate and on the impurity content. Some parameters of the dislocation structure and of the diffusion process were determined. It is shown that the dislocated dependence of internal friction can be used as a method of nondestructive testing of the impurity content of high-purity materials.

I-Love-Q relations in neutron stars and their applications to astrophysics, gravitational waves, and fundamental physics

NASA Astrophysics Data System (ADS)

Yagi, Kent; Yunes, Nicolás

2013-07-01

The exterior gravitational field of a slowly rotating neutron star can be characterized by its multipole moments, the first few being the neutron star mass, moment of inertia, and quadrupole moment to quadratic order in spin. In principle, all of these quantities depend on the neutron star’s internal structure, and thus, on unknown nuclear physics at supranuclear energy densities, all of which is usually parametrized through an equation of state. We here find relations between the moment of inertia, the Love numbers and the quadrupole moment (I-Love-Q relations) that do not depend sensitively on the neutron star’s internal structure. Such universality may arise for two reasons: (i) these relations depend most sensitively on the internal structure far from the core, where all realistic equations of state mostly approach each other; (ii) as the neutron star compactness increases, the I-Love-Q trio approaches that of a black hole, which does not have an internal-structure dependence. Three important consequences derive from these I-Love-Q relations. On an observational astrophysics front, the measurement of a single member of the I-Love-Q trio would automatically provide information about the other two, even when the latter may not be observationally accessible. On a gravitational-wave front, the I-Love-Q relations break the degeneracy between the quadrupole moment and the neutron star spins in binary inspiral waveforms, allowing second-generation ground-based detectors to determine the (dimensionless) averaged spin to O(10)%, given a sufficiently large signal-to-noise ratio detection. On a fundamental physics front, the I-Love-Q relations allow for tests of general relativity in the neutron star strong field that are both theory and internal-structure independent. As an example, by combining gravitational-wave and electromagnetic observations, one may constrain dynamical Chern-Simons gravity in the future by more than six orders of magnitude more stringently than Solar System and table-top constraints.

61Ni synchrotron radiation-based Mössbauer spectroscopy of nickel-based nanoparticles with hexagonal structure

PubMed Central

Masuda, Ryo; Kobayashi, Yasuhiro; Kitao, Shinji; Kurokuzu, Masayuki; Saito, Makina; Yoda, Yoshitaka; Mitsui, Takaya; Hosoi, Kohei; Kobayashi, Hirokazu; Kitagawa, Hiroshi; Seto, Makoto

2016-01-01

We measured the synchrotron-radiation (SR)-based Mössbauer spectra of Ni-based nanoparticles with a hexagonal structure that were synthesised by chemical reduction. To obtain Mössbauer spectra of the nanoparticles without 61Ni enrichment, we developed a measurement system for 61Ni SR-based Mössbauer absorption spectroscopy without X-ray windows between the 61Ni84V16 standard energy alloy and detector. The counting rate of the 61Ni nuclear resonant scattering in the system was enhanced by the detection of internal conversion electrons and the close proximity between the energy standard and the detector. The spectrum measured at 4 K revealed the internal magnetic field of the nanoparticles was 3.4 ± 0.9 T, corresponding to a Ni atomic magnetic moment of 0.3 Bohr magneton. This differs from the value of Ni3C and the theoretically predicted value of hexagonal-close-packed (hcp)-Ni and suggested the nanoparticle possessed intermediate carbon content between hcp-Ni and Ni3C of approximately 10 atomic % of Ni. The improved 61Ni Mössbauer absorption measurement system is also applicable to various Ni materials without 61Ni enrichment, such as Ni hydride nanoparticles. PMID:26883185

Exploring protein structure and dynamics through a project-oriented biochemistry laboratory module.

PubMed

Lipchock, James M; Ginther, Patrick S; Douglas, Bonnie B; Bird, Kelly E; Patrick Loria, J

2017-09-01

Here, we present a 10-week project-oriented laboratory module designed to provide a course-based undergraduate research experience in biochemistry that emphasizes the importance of biomolecular structure and dynamics in enzyme function. This module explores the impact of mutagenesis on an important active site loop for a biomedically-relevant human enzyme, protein tyrosine phosphatase 1B (PTP1B). Over the course of the semester students guide their own mutant of PTP1B from conception to characterization in a cost-effective manner and gain exposure to fundamental techniques in biochemistry, including site-directed DNA mutagenesis, bacterial recombinant protein expression, affinity column purification, protein quantitation, SDS-PAGE, and enzyme kinetics. This project-based approach allows an instructor to simulate a research setting and prepare students for productive research beyond the classroom. Potential modifications to expand or contract this module are also provided. © 2017 by The International Union of Biochemistry and Molecular Biology, 45(5):403-410, 2017. © 2017 The International Union of Biochemistry and Molecular Biology.

Finite Element Simulation of Low Velocity Impact Damage on an Aeronautical Carbon Composite Structure

NASA Astrophysics Data System (ADS)

Lemanle Sanga, Roger Pierre; Garnier, Christian; Pantalé, Olivier

2016-12-01

Low velocity barely visible impact damage (BVID) in laminated carbon composite structures has a major importance for aeronautical industries. This contribution leads with the development of finite element models to simulate the initiation and the propagation of internal damage inside a carbon composite structure due by a low velocity impact. Composite plates made from liquid resin infusion process (LRI) have been subjected to low energy impacts (around 25 J) using a drop weight machine. In the experimental procedure, the internal damage is evaluated using an infrared thermographic camera while the indentation depth of the face is measured by optical measurement technique. In a first time we developed a robust model using homogenised shells based on degenerated tri-dimensional brick elements and in a second time we decided to modelize the whole stacking sequence of homogeneous layers and cohesive interlaminar interfaces in order to compare and validate the obtained results. Both layer and interface damage initiation and propagation models based on the Hashin and the Benzeggagh-Kenane criteria have been used for the numerical simulations. Comparison of numerical results and experiments has shown the accuracy of the proposed models.

A Study into the Impact of Physical Structures on the Runway Velocity Field at the Atlantic City International Airport

NASA Astrophysics Data System (ADS)

King, David, Jr.; Manson, Russell; Trout, Joseph; Decicco, Nicholas; Rios, Manny

2015-04-01

Wake vortices are generated by airplanes in flight. These vortices decay slowly and may persist for several minutes after their creation. These vortices and associated smaller scale turbulent structures present a hazard to incoming flights. It is for this reason that incoming flights are timed to arrive after these vortices have dissipated. Local weather conditions, mainly prevailing winds, can affect the transport and evolution of these vortices; therefore, there is a need to fully understand localized wind patterns at the airport-sized mircoscale. Here we have undertaken a computational investigation into the impacts of localized wind flows and physical structures on the velocity field at Atlantic City International Airport. The simulations are undertaken in OpenFOAM, an open source computational fluid dynamics software package, using an optimized geometric mesh of the airport. Initial conditions for the simulations are based on historical data with the option to run simulations based on projected weather conditions imported from the Weather Research & Forcasting (WRF) Model. Sub-grid scale turbulence is modeled using a Large Eddy Simulation (LES) approach. The initial results gathered from the WRF Model simulations and historical weather data analysis are presented elsewhere.

Structural determinants of an internal ribosome entry site that direct translational reading frame selection

PubMed Central

Ren, Qian; Au, Hilda H.T.; Wang, Qing S.; Lee, Seonghoon; Jan, Eric

2014-01-01

The dicistrovirus intergenic internal ribosome entry site (IGR IRES) directly recruits the ribosome and initiates translation using a non-AUG codon. A subset of IGR IRESs initiates translation in either of two overlapping open reading frames (ORFs), resulting in expression of the 0 frame viral structural polyprotein and an overlapping +1 frame ORFx. A U–G base pair adjacent to the anticodon-like pseudoknot of the IRES directs +1 frame translation. Here, we show that the U-G base pair is not absolutely required for +1 frame translation. Extensive mutagenesis demonstrates that 0 and +1 frame translation can be uncoupled. Ribonucleic acid (RNA) structural probing analyses reveal that the mutant IRESs adopt distinct conformations. Toeprinting analysis suggests that the reading frame is selected at a step downstream of ribosome assembly. We propose a model whereby the IRES adopts conformations to occlude the 0 frame aminoacyl-tRNA thereby allowing delivery of the +1 frame aminoacyl-tRNA to the A site to initiate translation of ORFx. This study provides a new paradigm for programmed recoding mechanisms that increase the coding capacity of a viral genome. PMID:25038250

Ecological Network Analysis for a Low-Carbon and High-Tech Industrial Park

PubMed Central

Lu, Yi; Su, Meirong; Liu, Gengyuan; Chen, Bin; Zhou, Shiyi; Jiang, Meiming

2012-01-01

Industrial sector is one of the indispensable contributors in global warming. Even if the occurrence of ecoindustrial parks (EIPs) seems to be a good improvement in saving ecological crises, there is still a lack of definitional clarity and in-depth researches on low-carbon industrial parks. In order to reveal the processes of carbon metabolism in a low-carbon high-tech industrial park, we selected Beijing Development Area (BDA) International Business Park in Beijing, China as case study, establishing a seven-compartment- model low-carbon metabolic network based on the methodology of Ecological Network Analysis (ENA). Integrating the Network Utility Analysis (NUA), Network Control Analysis (NCA), and system-wide indicators, we compartmentalized system sectors into ecological structure and analyzed dependence and control degree based on carbon metabolism. The results suggest that indirect flows reveal more mutuality and exploitation relation between system compartments and they are prone to positive sides for the stability of the whole system. The ecological structure develops well as an approximate pyramidal structure, and the carbon metabolism of BDA proves self-mutualistic and sustainable. Construction and waste management were found to be two active sectors impacting carbon metabolism, which was mainly regulated by internal and external environment. PMID:23365516

IRESPred: Web Server for Prediction of Cellular and Viral Internal Ribosome Entry Site (IRES)

PubMed Central

Kolekar, Pandurang; Pataskar, Abhijeet; Kulkarni-Kale, Urmila; Pal, Jayanta; Kulkarni, Abhijeet

2016-01-01

Cellular mRNAs are predominantly translated in a cap-dependent manner. However, some viral and a subset of cellular mRNAs initiate their translation in a cap-independent manner. This requires presence of a structured RNA element, known as, Internal Ribosome Entry Site (IRES) in their 5′ untranslated regions (UTRs). Experimental demonstration of IRES in UTR remains a challenging task. Computational prediction of IRES merely based on sequence and structure conservation is also difficult, particularly for cellular IRES. A web server, IRESPred is developed for prediction of both viral and cellular IRES using Support Vector Machine (SVM). The predictive model was built using 35 features that are based on sequence and structural properties of UTRs and the probabilities of interactions between UTR and small subunit ribosomal proteins (SSRPs). The model was found to have 75.51% accuracy, 75.75% sensitivity, 75.25% specificity, 75.75% precision and Matthews Correlation Coefficient (MCC) of 0.51 in blind testing. IRESPred was found to perform better than the only available viral IRES prediction server, VIPS. The IRESPred server is freely available at http://bioinfo.net.in/IRESPred/. PMID:27264539

A General Procedure to Assess the Internal Structure of a Noncognitive Measure--The Student360 Insight Program (S360) Time Management Scale. Research Report. ETS RR-11-42

ERIC Educational Resources Information Center

Ling, Guangming; Rijmen, Frank

2011-01-01

The factorial structure of the Time Management (TM) scale of the Student 360: Insight Program (S360) was evaluated based on a national sample. A general procedure with a variety of methods was introduced and implemented, including the computation of descriptive statistics, exploratory factor analysis (EFA), and confirmatory factor analysis (CFA).…

Internal Medicine Residents' Perceptions of Team-Based Care and its Educational Value in the Continuity Clinic: A Qualitative Study.

PubMed

Soones, Tacara N; O'Brien, Bridget C; Julian, Katherine A

2015-09-01

In order to teach residents how to work in interprofessional teams, educators in graduate medical education are implementing team-based care models in resident continuity clinics. However, little is known about the impact of interprofessional teams on residents' education in the ambulatory setting. To identify factors affecting residents' experience of team-based care within continuity clinics and the impact of these teams on residents' education. This was a qualitative study of focus groups with internal medicine residents. Seventy-seven internal medicine residents at the University of California San Francisco at three continuity clinic sites participated in the study. Qualitative interviews were audiotaped and transcribed. The authors used a general inductive approach with sensitizing concepts in four frames (structural, human resources, political and symbolic) to develop codes and identify themes. Residents believed that team-based care improves continuity and quality of care. Factors in four frames affected their ability to achieve these goals. Structural factors included communication through the electronic medical record, consistent schedules and regular team meetings. Human resources factors included the presence of stable teams and clear roles. Political and symbolic factors negatively impacted team-based care, and included low staffing ratios and a culture of ultimate resident responsibility, respectively. Regardless of the presence of these factors or resident perceptions of their teams, residents did not see the practice of interprofessional team-based care as intrinsically educational. Residents' experiences practicing team-based care are influenced by many principles described in the interprofessional teamwork literature, including understanding team members' roles, good communication and sufficient staffing. However, these attributes are not correlated with residents' perceptions of the educational value of team-based care. Including residents in interprofessional teams in their clinic may not be sufficient to teach residents how team-based care can enhance their overall learning and future practice.

Efficient Procedure for the Numerical Calculation of Harmonic Vibrational Frequencies Based on Internal Coordinates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miliordos, Evangelos; Xantheas, Sotiris S.

We propose a general procedure for the numerical calculation of the harmonic vibrational frequencies that is based on internal coordinates and Wilson’s GF methodology via double differentiation of the energy. The internal coordinates are defined as the geometrical parameters of a Z-matrix structure, thus avoiding issues related to their redundancy. Linear arrangements of atoms are described using a dummy atom of infinite mass. The procedure has been automated in FORTRAN90 and its main advantage lies in the nontrivial reduction of the number of single-point energy calculations needed for the construction of the Hessian matrix when compared to the corresponding numbermore » using double differentiation in Cartesian coordinates. For molecules of C 1 symmetry the computational savings in the energy calculations amount to 36N – 30, where N is the number of atoms, with additional savings when symmetry is present. Typical applications for small and medium size molecules in their minimum and transition state geometries as well as hydrogen bonded clusters (water dimer and trimer) are presented. Finally, in all cases the frequencies based on internal coordinates differ on average by <1 cm –1 from those obtained from Cartesian coordinates.« less

Examining Functioning and Contextual Factors in Individuals with Joint Contractures from the Health Professional Perspective Using the ICF: An International Internet-Based Qualitative Expert Survey.

PubMed

Fischer, Uli; Müller, Martin; Strobl, Ralf; Bartoszek, Gabriele; Meyer, Gabriele; Grill, Eva

2016-01-01

The aim of this study was to identify disease-related aspects of functioning and disability in people with joint contractures from a health professionals' perspective and to describe the findings, using categories of the International Classification of Functioning, Disability, and Health (ICF). An Internet-based expert survey. We asked international health professionals for typical problems in functioning and important contextual factors of individuals with joint contractures using an Internet-based open-ended questionnaire. All answers were linked to the ICF according to established rules. Absolute and relative frequencies of the linked ICF categories were reported. Eighty experts named 1785 meaning units which could be linked to 256 ICF categories. Among the categories, 24.2% belonged to the component Body Functions, 20.7% to Body Structures, 36.3% to Activities and Participation, and 18.8% to Environmental Factors. Health professionals addressed a large variety of functional problems and multifaceted aspects due to the symptom joint contractures. International health professionals reported a large variety of aspects of functioning and health, which are related to joint contractures. © 2014 Association of Rehabilitation Nurses.

Role of cerebellum in learning postural tasks.

PubMed

Ioffe, M E; Chernikova, L A; Ustinova, K I

2007-01-01

For a long time, the cerebellum has been known to be a structure related to posture and equilibrium control. According to the anatomic structure of inputs and internal structure of the cerebellum, its role in learning was theoretically reasoned and experimentally proved. The hypothesis of an inverse internal model based on feedback-error learning mechanism combines feedforward control by the cerebellum and feedback control by the cerebral motor cortex. The cerebellar cortex is suggested to acquire internal models of the body and objects in the external world. During learning of a new tool the motor cortex receives feedback from the realized movement while the cerebellum produces only feedforward command. To realize a desired movement without feedback of the realized movement, the cerebellum needs to form an inverse model of the hand/arm system. This suggestion was supported by FMRi data. The role of cerebellum in learning new postural tasks mainly concerns reorganization of natural synergies. A learned postural pattern in dogs has been shown to be disturbed after lesions of the cerebral motor cortex or cerebellar nuclei. In humans, learning voluntary control of center of pressure position is greatly disturbed after cerebellar lesions. However, motor cortex and basal ganglia are also involved in the feedback learning postural tasks.

A case study of the changing nature of a non-government organisation: a focus on disability and development.

PubMed

Yoshida, Karen K; Parnes, Penny; Brooks, Dina; Cameron, Deb

2009-01-01

The purpose of this article is to describe the changing nature, process and structure of an international non-governmental organisation (NGO) in response to internal and external factors. This article is based on the interview data collected for the study which focussed on the experiences and perception of key informants on trends related to official development assistance, local governments' perspective of the NGO as a development partner and the NGO's perception of corporate and foundation support. Qualitative descriptive data analysis was used. Three main themes were developed with the interview data. Our analysis indicated shifts in the: (1) vision/nature (single to cross disability focus), (2) structure (building internal and external relationships) and (3) process (from ad hoc to systemic evaluations). These broader issues of vision, structure (relationships) and evaluation within and outside of the organisation, needs to be addressed to provide a foundation upon which funding initiatives can be developed. A closer relationship between funders and projects/programmes would do much to enhance the partnership and would ensure that the projects are able to measure and report results in a manner that is conducive to increasing support.

Resistance to Internal Damage and Scaling of Concrete Air Entrained By Microspheres

NASA Astrophysics Data System (ADS)

Molendowska, Agnieszka; Wawrzenczyk, Jerzy

2017-10-01

This paper report the test results of high strength concrete produced with slag cement and air entrained with polymer microspheres in three diameters. The study focused on determining the effects of the microsphere size and quantity on the air void structure and resistance to internal cracking and scaling of the concrete. The resistance to internal cracking was determined in compliance with the requirements of the modified ASTM C666 A method on beam specimens. The scaling resistance in a 3% NaCl solution was determined using the slab test in accordance with PKN-CEN/TS 12390-9:2007. The air void structure parameters were determined to PN-EN 480-11:1998. The study results indicate that the use of microspheres is an effective air entrainment method providing very good air void structure parameters. The results show high freeze-thaw durability of polymer microsphere-based concrete in exposure class XF3. The scaling resistance test confirms that it is substantially more difficult to protect concrete against scaling in the presence of the 3% NaCl solution (exposure class XF4). Concrete scaling is a complex phenomenon controlled by a number of independent factors.

Rapid Production of Internally Structured Colloids by Flash Nanoprecipitation of Block Copolymer Blends.

PubMed

Grundy, Lorena S; Lee, Victoria E; Li, Nannan; Sosa, Chris; Mulhearn, William D; Liu, Rui; Register, Richard A; Nikoubashman, Arash; Prud'homme, Robert K; Panagiotopoulos, Athanassios Z; Priestley, Rodney D

2018-05-08

Colloids with internally structured geometries have shown great promise in applications ranging from biosensors to optics to drug delivery, where the internal particle structure is paramount to performance. The growing demand for such nanomaterials necessitates the development of a scalable processing platform for their production. Flash nanoprecipitation (FNP), a rapid and inherently scalable colloid precipitation technology, is used to prepare internally structured colloids from blends of block copolymers and homopolymers. As revealed by a combination of experiments and simulations, colloids prepared from different molecular weight diblock copolymers adopt either an ordered lamellar morphology consisting of concentric shells or a disordered lamellar morphology when chain dynamics are sufficiently slow to prevent defect annealing during solvent exchange. Blends of homopolymer and block copolymer in the feed stream generate more complex internally structured colloids, such as those with hierarchically structured Janus and patchy morphologies, due to additional phase separation and kinetic trapping effects. The ability of the FNP process to generate such a wide range of morphologies using a simple and scalable setup provides a pathway to manufacturing internally structured colloids on an industrial scale.

Numerical investigation of the thermal and electrical performances for combined solar photovoltaic/thermal (PV/T) modules based on internally extruded fin flow channel

NASA Astrophysics Data System (ADS)

Deng, Y. C.; Li, Q. P.; Wang, G. J.

2017-11-01

A solar photovoltaic/thermal (PV/T) module based on internally extruded fin flow channel was investigated numerically in this paper. First of all, the structures of the thin plate heat exchanger and the PV/T module were presented. Then, a numerical model of the PV/T module considering solar irradiation, fluid flow and heat transfer was developed to analyze the performance of the module. Finally, the steady electrical and thermal efficiencies of the PV/T module at different inlet water temperatures and mass flow rates were achieved. These numerical results supply theory basis for practical application of the PV/T module.

A New Algorithm for Identifying Cis-Regulatory Modules Based on Hidden Markov Model

PubMed Central

2017-01-01

The discovery of cis-regulatory modules (CRMs) is the key to understanding mechanisms of transcription regulation. Since CRMs have specific regulatory structures that are the basis for the regulation of gene expression, how to model the regulatory structure of CRMs has a considerable impact on the performance of CRM identification. The paper proposes a CRM discovery algorithm called ComSPS. ComSPS builds a regulatory structure model of CRMs based on HMM by exploring the rules of CRM transcriptional grammar that governs the internal motif site arrangement of CRMs. We test ComSPS on three benchmark datasets and compare it with five existing methods. Experimental results show that ComSPS performs better than them. PMID:28497059

A Study of Energy Partitioning Using A Set of Related Explosive Formulations

NASA Astrophysics Data System (ADS)

Lieber, Mark; Foster, Joseph C., Jr.; Stewart, D. Scott

2011-06-01

Condensed phase high explosives convert potential energy stored in the electro-magnetic field structure of complex molecules to kinetic energy during the detonation process. This energy is manifest in the internal thermodynamic energy and the translational flow of the products. Historically, the explosive design problem has focused on intramolecular stoichiometry providing prompt reactions based on transport physics at the molecular scale. Modern material design has evolved to approaches that employee intermolecular ingredients to alter the spatial and temporal distribution of energy release. CHEETA has been used to produce data for a set of fictitious explosive formulations based on C-4 to study the partitioning of the available energy between internal and flow energy in the detonation. The equation of state information from CHEETA has been used in ALE3D to develop an understanding of the relationship between variations in the formulation parameters and the internal energy cycle in the products.

Structural Analysis Methods for Structural Health Management of Future Aerospace Vehicles

NASA Technical Reports Server (NTRS)

Tessler, Alexander

2007-01-01

Two finite element based computational methods, Smoothing Element Analysis (SEA) and the inverse Finite Element Method (iFEM), are reviewed, and examples of their use for structural health monitoring are discussed. Due to their versatility, robustness, and computational efficiency, the methods are well suited for real-time structural health monitoring of future space vehicles, large space structures, and habitats. The methods may be effectively employed to enable real-time processing of sensing information, specifically for identifying three-dimensional deformed structural shapes as well as the internal loads. In addition, they may be used in conjunction with evolutionary algorithms to design optimally distributed sensors. These computational tools have demonstrated substantial promise for utilization in future Structural Health Management (SHM) systems.

Probing a 2-aminobenzimidazole library for binding to RNA internal loops via two-dimensional combinatorial screening.

PubMed

Velagapudi, Sai Pradeep; Pushechnikov, Alexei; Labuda, Lucas P; French, Jonathan M; Disney, Matthew D

2012-11-16

There are many potential RNA drug targets in bacterial, viral, and human transcriptomes. However, there are few small molecules that modulate RNA function. This is due, in part, to a lack of fundamental understanding about RNA-ligand interactions including the types of small molecules that bind to RNA structural elements and the RNA structural elements that bind to small molecules. In an effort to better understand RNA-ligand interactions, we diversified the 2-aminobenzimidazole core (2AB) and probed the resulting library for binding to a library of RNA internal loops. We chose the 2AB core for these studies because it is a privileged scaffold for binding RNA based on previous reports. These studies identified that N-methyl pyrrolidine, imidazole, and propylamine diversity elements at the R1 position increase binding to internal loops; variability at the R2 position is well tolerated. The preferred RNA loop space was also determined for five ligands using a statistical approach and identified trends that lead to selective recognition.

Thermal structure and heat balance of the outer planets

NASA Technical Reports Server (NTRS)

Conrath, B. J.; Hanel, R. A.; Samuelson, R. E.

1989-01-01

Current knowledge of the thermal structure and energy balance of the outer planets is summarized. The Voyager spacecraft experiments have provided extensive new information on the atmospheric temperatures and energetics of Jupiter, Saturn and Uranus. All three planets show remarkably small global-scale horizontal thermal contrast, indicating efficient redistribution of heat within the atmospheres or interiors. Horizontal temperature gradients on the scale of the zonal jets indicate that the winds decay with height in the upper troposphere. This suggests that the winds are driven at deeper levels and are subjected to frictional damping of unknown origin at higher levels. Both Jupiter and Saturn have internal power sources equal to about 70 percent of the absorbed solar power. This result is consistent with the view that significant helium differentiation has occurred on Saturn. Uranus has an internal power no greater than 13 percent of the absorbed solar power, while earth-based observations suggest Neptune has an internal power in excess of 100 percent of the absorbed solar power.

Langevin Equation for DNA Dynamics

NASA Astrophysics Data System (ADS)

Grych, David; Copperman, Jeremy; Guenza, Marina

Under physiological conditions, DNA oligomers can contain well-ordered helical regions and also flexible single-stranded regions. We describe the site-specific motion of DNA with a modified Rouse-Zimm Langevin equation formalism that describes DNA as a coarse-grained polymeric chain with global structure and local flexibility. The approach has successfully described the protein dynamics in solution and has been extended to nucleic acids. Our approach provides diffusive mode analytical solutions for the dynamics of global rotational diffusion and internal motion. The internal DNA dynamics present a rich energy landscape that accounts for an interior where hydrogen bonds and base-stacking determine structure and experience limited solvent exposure. We have implemented several models incorporating different coarse-grained sites with anisotropic rotation, energy barrier crossing, and local friction coefficients that include a unique internal viscosity and our models reproduce dynamics predicted by atomistic simulations. The models reproduce bond autocorrelation along the sequence as compared to that directly calculated from atomistic molecular dynamics simulations. The Langevin equation approach captures the essence of DNA dynamics without a cumbersome atomistic representation.

Imaging Internal Structure of Long Bones Using Wave Scattering Theory.

PubMed

Zheng, Rui; Le, Lawrence H; Sacchi, Mauricio D; Lou, Edmond

2015-11-01

An ultrasonic wavefield imaging method is developed to reconstruct the internal geometric properties of long bones using zero-offset data acquired axially on the bone surface. The imaging algorithm based on Born scattering theory is implemented with the conjugate gradient iterative method to reconstruct an optimal image. In the case of a multilayered velocity model, ray tracing through a smooth medium is used to calculate the traveled distance and traveling time. The method has been applied to simulated and real data. The results indicate that the interfaces of the top cortex are accurately imaged and correspond favorably to the original model. The reconstructed bottom cortex below the marrow is less accurate mainly because of the low signal-to-noise ratio. The current imaging method has successfully recovered the top cortical layer, providing a potential tool to investigate the internal structures of long bone cortex for osteoporosis assessment. Copyright © 2015 World Federation for Ultrasound in Medicine & Biology. Published by Elsevier Inc. All rights reserved.

Chapter 3: International non-governmental organizations in the emerging world society: the example of ISPRM.

PubMed

Reinhardt, Jan D; von Groote, Per M; DeLisa, Joel A; Melvin, John L; Bickenbach, Jerome E; Li, Leonard S W; Stucki, Gerold

2009-09-01

Using the International Society of Physical and Rehabilitation Medicine (ISPRM) as a case in point, the paper describes the complex world societal situation within which non-governmental organizations that address health issues have to operate.This paper describes the complex world societal situation within which non-governmental organizations (NGOs), that are addressing health issues have to operate. In particular, as an international organization in official relation with the World Health Organization (WHO), ISPRM is confronted with a variety of responsibilities and a true world health political mandate. The accompanying rights need to be played out in relation to its own internal member organization and external allies. The theory of the world society and the current situation are briefly reviewed. The role of international NGOs within the world health polity, rehabilitation and Physical and Rehabilitation Medicine (PRM) is highlighted, whilst special emphasis is placed on NGOs in official relation with WHO. Functions, dysfunctions and challenges of international NGOs operating in the health sector are discussed. Against this background, key approaches to enhance ISPRM's political role are analysed. These include transparent and accountable development of the organization, the differentiation between internal and external policy relations, the harmonization of organizational structures and procedures, the consequential use of political structures available to influence WHO's agenda, and the identification of other policy players of major relevance to PRM in order to build strategic alliances with external partners and to enhance ISPRM's membership base.

The Effect of Plant Source on the Structural Properties of Lignin-based Polyurethane Blends

NASA Astrophysics Data System (ADS)

Lang, Jason; Dadmun, Mark

The development of polyurethane materials based on incorporating lignin from a variety of plant sources (softwood, hardwood, and non-wood) were synthesized. Further experiments study the physical properties of the resulting lignin-based polyurethane as a function of the lignin structure, which varies with plant source. Here, we report the effect that internal crosslinking of the lignin structure has on the modulus, hardness, glass transition temperature, and thermal decomposition of the synthesized lignin-based polyurethane composites. The lignins used in this work were a softwood kraft lignin, hardwood lignosulfonate, and a wheat straw soda lignin. The lignin, acting as a polyol and the hardblock segment, reacts with TDI-endcapped PPG (2,300 MN) as the rubbery softblock component to produce lignin-based polyurethanes with varying lignin content (10, 20, 30, 40, 50, and 60 wt%). Results show that the wheat straw lignin provides the superior mechanical properties and thermal resistance. These properties are correlated to the two-phase morphology of the resultant polyurethane.

The growth of a culture of evidence-based obstetrics in South Africa: a qualitative case study

PubMed Central

2011-01-01

Background While the past two decades have seen a shift towards evidence-based obstetrics and midwifery, the process through which a culture of evidence-based practice develops and is sustained within particular fields of clinical practice has not been well documented, particularly in LMICs (low- and middle-income countries). Forming part of a broader qualitative study of evidence-based policy making, this paper describes the development of a culture of evidence-based practice amongst maternal health policy makers and senior academic obstetricians in South Africa Methods A qualitative case-study approach was used. This included a literature review, a policy document review, a timeline of key events and the collection and analysis of 15 interviews with policy makers and academic clinicians involved in these policy processes and sampled using a purposive approach. The data was analysed thematically. Results The concept of evidence-based medicine became embedded in South African academic obstetrics at a very early stage in relation to the development of the concept internationally. The diffusion of this concept into local academic obstetrics was facilitated by contact and exchange between local academic obstetricians, opinion leaders in international research and structures promoting evidence-based practice. Furthermore the growing acceptance of the concept was stimulated locally through the use of existing professional networks and meetings to share ideas and the contribution of local researchers to building the evidence base for obstetrics both locally and internationally. As a testimony to the extent of the diffusion of evidence-based medicine, South Africa has strongly evidence-based policies for maternal health. Conclusion This case study shows that the combined efforts of local and international researchers can create a culture of evidence-based medicine within one country. It also shows that doing so required time and perseverance from international researchers combined with a readiness by local researchers to receive and actively promote the practice. PMID:21443794

Using Chemical Structure Information to Predict In Vitro Pharmacokinetic Parameters (SOT)

EPA Science Inventory

Toxicokinetic data are key for relating exposure and internal dose when building in vitro-based risk assessment models. However, conducting in vivo toxicokinetic studies has time and cost limitations, and in vitro toxicokinetic data is available only for a limited set of chemical...

Maintaining the Median in Early Childhood Educational Methodology

ERIC Educational Resources Information Center

Hewes, Dorothy W.

2005-01-01

History shows that educational systems and educational theorists have consciously or unconsciously structured the education of young children toward one end or the other of the continuum between "internals" and "externals". Systems in which teacher-guided learning was based on efforts to satisfy individual needs, systems that…

The Porosity of Eros and Implications for Its Internal Structure

NASA Technical Reports Server (NTRS)

Wilkison, S. L.; Robinson, M. S.; Thomas, P. C.; Veverka, J.; McCoy, T. J.; Murchie, S. L.; Prockter, L.; Yeomans, D.

2001-01-01

We estimate the porosity of Eros to be between 21-33%. Based on this porosity range and morphologic observations of the surface, we suggest that the asteroid is heavily fractured (but not a rubble pile). Additional information is contained in the original extended abstract.

76 FR 2246 - Defense Support of Civil Authorities (DSCA)

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-13

... and inconsistent with current law and the current organizational structure of the Department of... received above, the following has been included in the final rule based on internal comments received on..., the Defense Agencies, the DoD Field Activities, and all other organizational entities within the...

Organizational Structures that Support Internal Program Evaluation

ERIC Educational Resources Information Center

Lambur, Michael T.

2008-01-01

This chapter explores how the structure of large complex organizations such as Cooperative Extension affects their ability to support internal evaluation of their programs and activities. Following a literature review of organizational structure and its relation to internal evaluation capacity, the chapter presents the results of interviews with…

Development of a Brief Questionnaire to Assess Contraceptive Intent

PubMed Central

Raine-Bennett, Tina R; Rocca, Corinne H

2015-01-01

Objective We sought to develop and validate an instrument that can enable providers to identify young women who may be at risk of contraceptive non-adherence. Methods Item response theory based methods were used to evaluate the psychometric properties of the Contraceptive Intent Questionnaire, a 15-item self-administered questionnaire, based on theory and prior qualitative and quantitative research. The questionnaire was administered to 200 women aged 15–24 years who were initiating contraceptives. We assessed item fit to the item response model, internal consistency, internal structure validity, and differential item functioning. Results All items fit a one-dimensional model. The separation reliability coefficient was 0.73. Participants’ overall scores covered the full range of the scale (0–15), and items appropriately matched the range of participants’ contraceptive intent. Items met the criteria for internal structure validity and most items functioned similarly between groups of women. Conclusion The Contraceptive Intent Questionnaire appears to be a reliable and valid tool. Future testing is needed to assess predictive ability and clinical utility. Practice Implications The Contraceptive Intent Questionnaire may serve as a valid tool to help providers identify women who may have problems with contraceptive adherence, as well as to pinpoint areas in which counseling may be directed. PMID:26104994

Development of a brief questionnaire to assess contraceptive intent.

PubMed

Raine-Bennett, Tina R; Rocca, Corinne H

2015-11-01

We sought to develop and validate an instrument that can enable providers to identify young women who may be at risk of contraceptive non-adherence. Item response theory based methods were used to evaluate the psychometric properties of the Contraceptive Intent Questionnaire, a 15-item self-administered questionnaire, based on theory and prior qualitative and quantitative research. The questionnaire was administered to 200 women aged 15-24 years who were initiating contraceptives. We assessed item fit to the item response model, internal consistency, internal structure validity, and differential item functioning. All items fit a one-dimensional model. The separation reliability coefficient was 0.73. Participants' overall scores covered the full range of the scale (0-15), and items appropriately matched the range of participants' contraceptive intent. Items met the criteria for internal structure validity and most items functioned similarly between groups of women. The Contraceptive Intent Questionnaire appears to be a reliable and valid tool. Future testing is needed to assess predictive ability and clinical utility. The Contraceptive Intent Questionnaire may serve as a valid tool to help providers identify women who may have problems with contraceptive adherence, as well as to pinpoint areas in which counseling may be directed. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Measurement of large steel plates based on linear scan structured light scanning

NASA Astrophysics Data System (ADS)

Xiao, Zhitao; Li, Yaru; Lei, Geng; Xi, Jiangtao

2018-01-01

A measuring method based on linear structured light scanning is proposed to achieve the accurate measurement of the complex internal shape of large steel plates. Firstly, by using a calibration plate with round marks, an improved line scanning calibration method is designed. The internal and external parameters of camera are determined through the calibration method. Secondly, the images of steel plates are acquired by line scan camera. Then the Canny edge detection method is used to extract approximate contours of the steel plate images, the Gauss fitting algorithm is used to extract the sub-pixel edges of the steel plate contours. Thirdly, for the problem of inaccurate restoration of contour size, by measuring the distance between adjacent points in the grid of known dimensions, the horizontal and vertical error curves of the images are obtained. Finally, these horizontal and vertical error curves can be used to correct the contours of steel plates, and then combined with the calibration parameters of internal and external, the size of these contours can be calculated. The experiments results demonstrate that the proposed method can achieve the error of 1 mm/m in 1.2m×2.6m field of view, which has satisfied the demands of industrial measurement.

Modeling of Interface and Internal Disorder Applied to XRD Analysis of Ag-Based Nano-Multilayers.

PubMed

Ariosa, Daniel; Cancellieri, Claudia; Araullo-Peters, Vicente; Chiodi, Mirco; Klyatskina, Elizaveta; Janczak-Rusch, Jolanta; Jeurgens, Lars P H

2018-06-20

Multilayered structures are a promising route to tailor electronic, magnetic, optical, and/or mechanical properties and durability of functional materials. Sputter deposition at room temperature, being an out-of-equilibrium process, introduces structural defects and confers to these nanosystems an intrinsic thermodynamical instability. As-deposited materials exhibit a large amount of internal atomic displacements within each constituent block as well as severe interface roughness between different layers. To access and characterize the internal multilayer disorder and its thermal evolution, X-ray diffraction investigation and analysis are performed systematically at differently grown Ag-Ge/aluminum nitride (AlN) multilayers (co-deposited, sequentially deposited with and without radio frequency (RF) bias) samples and after high-temperature annealing treatment. We report here on model calculations based on a kinematic formalism describing the displacement disorder both within the multilayer blocks and at the interfaces to reproduce the experimental X-ray diffraction intensities. Mixing and displacements at the interface are found to be considerably reduced after thermal treatment for co- and sequentially deposited Ag-Ge/AlN samples. The application of a RF bias during the deposition causes the highest interface mixing and introduces random intercalates in the AlN layers. X-ray analysis is contrasted to transmission electron microscopy pictures to validate the approach.

Quantification of Lignin and Its Structural Features in Plant Biomass Using 13C Lignin as Internal Standard for Pyrolysis-GC-SIM-MS.

PubMed

van Erven, Gijs; de Visser, Ries; Merkx, Donny W H; Strolenberg, Willem; de Gijsel, Peter; Gruppen, Harry; Kabel, Mirjam A

2017-10-17

Understanding the mechanisms underlying plant biomass recalcitrance at the molecular level can only be achieved by accurate analyses of both the content and structural features of the molecules involved. Current quantification of lignin is, however, majorly based on unspecific gravimetric analysis after sulfuric acid hydrolysis. Hence, our research aimed at specific lignin quantification with concurrent characterization of its structural features. Hereto, for the first time, a polymeric 13 C lignin was used as internal standard (IS) for lignin quantification via analytical pyrolysis coupled to gas chromatography with mass-spectrometric detection in selected ion monitoring mode (py-GC-SIM-MS). In addition, relative response factors (RRFs) for the various pyrolysis products obtained were determined and applied. First, 12 C and 13 C lignin were isolated from nonlabeled and uniformly 13 C labeled wheat straw, respectively, and characterized by heteronuclear single quantum coherence (HSQC), nuclear magnetic resonance (NMR), and py-GC/MS. The two lignin isolates were found to have identical structures. Second, 13 C-IS based lignin quantification by py-GC-SIM-MS was validated in reconstituted biomass model systems with known contents of the 12 C lignin analogue and was shown to be extremely accurate (>99.9%, R 2 > 0.999) and precise (RSD < 1.5%). Third, 13 C-IS based lignin quantification was applied to four common poaceous biomass sources (wheat straw, barley straw, corn stover, and sugar cane bagasse), and lignin contents were in good agreement with the total gravimetrically determined lignin contents. Our robust method proves to be a promising alternative for the high-throughput quantification of lignin in milled biomass samples directly and simultaneously provides a direct insight into the structural features of lignin.

Quantification of Lignin and Its Structural Features in Plant Biomass Using 13C Lignin as Internal Standard for Pyrolysis-GC-SIM-MS

PubMed Central

2017-01-01

Understanding the mechanisms underlying plant biomass recalcitrance at the molecular level can only be achieved by accurate analyses of both the content and structural features of the molecules involved. Current quantification of lignin is, however, majorly based on unspecific gravimetric analysis after sulfuric acid hydrolysis. Hence, our research aimed at specific lignin quantification with concurrent characterization of its structural features. Hereto, for the first time, a polymeric 13C lignin was used as internal standard (IS) for lignin quantification via analytical pyrolysis coupled to gas chromatography with mass-spectrometric detection in selected ion monitoring mode (py-GC-SIM-MS). In addition, relative response factors (RRFs) for the various pyrolysis products obtained were determined and applied. First, 12C and 13C lignin were isolated from nonlabeled and uniformly 13C labeled wheat straw, respectively, and characterized by heteronuclear single quantum coherence (HSQC), nuclear magnetic resonance (NMR), and py-GC/MS. The two lignin isolates were found to have identical structures. Second, 13C-IS based lignin quantification by py-GC-SIM-MS was validated in reconstituted biomass model systems with known contents of the 12C lignin analogue and was shown to be extremely accurate (>99.9%, R2 > 0.999) and precise (RSD < 1.5%). Third, 13C-IS based lignin quantification was applied to four common poaceous biomass sources (wheat straw, barley straw, corn stover, and sugar cane bagasse), and lignin contents were in good agreement with the total gravimetrically determined lignin contents. Our robust method proves to be a promising alternative for the high-throughput quantification of lignin in milled biomass samples directly and simultaneously provides a direct insight into the structural features of lignin. PMID:28926698

Sub-seismic scale folding and thrusting within an exposed mass transport deposit: A case study from NW Argentina

NASA Astrophysics Data System (ADS)

Sobiesiak, Matheus S.; Alsop, G. Ian; Kneller, Ben; Milana, Juan Pablo

2017-03-01

While imaging of mass transport deposits (MTDs) by seismic reflection techniques commonly reveals thrusts and large blocks that affect entire deposits, associated systems of folds are generally less apparent as they are typically below the limits of seismic resolution. However, such sub-seismic scale structures are important as they permit the direction of emplacement, gross kinematics and internal strain within MTDs to be determined. Here we present a rigorous description of two outcrop-scale MTDs exposed in La Peña gorge, northwestern Argentina. These Carboniferous MTDs enable us to illustrate structural changes from a compressional domain, marked by sets of imbricated sandstone layers, into an extensional domain, characterized by sheared blocks of sandstone embedded in a finer matrix. Folds may be progressively modified during slump translation, resulting in asymmetric folds, which undergo subsequent deformation leading to sheared fold limbs together with detached and rotated fold hinges. In order to constrain transport directions within the MTDs, we measured fold hinges, mud clast alignment, and thrust planes as kinematic indicators. We propose emplacement models for both MTDs based on the overall deformational behaviour of sandstone beds during translation. The first model is based on the internal geometries and structures of a fault-dominated MTD, and the second model is based on layer-normal shearing in a fold-dominated MTD.

Automatic non-proliferative diabetic retinopathy screening system based on color fundus image.

PubMed

Xiao, Zhitao; Zhang, Xinpeng; Geng, Lei; Zhang, Fang; Wu, Jun; Tong, Jun; Ogunbona, Philip O; Shan, Chunyan

2017-10-26

Non-proliferative diabetic retinopathy is the early stage of diabetic retinopathy. Automatic detection of non-proliferative diabetic retinopathy is significant for clinical diagnosis, early screening and course progression of patients. This paper introduces the design and implementation of an automatic system for screening non-proliferative diabetic retinopathy based on color fundus images. Firstly, the fundus structures, including blood vessels, optic disc and macula, are extracted and located, respectively. In particular, a new optic disc localization method using parabolic fitting is proposed based on the physiological structure characteristics of optic disc and blood vessels. Then, early lesions, such as microaneurysms, hemorrhages and hard exudates, are detected based on their respective characteristics. An equivalent optical model simulating human eyes is designed based on the anatomical structure of retina. Main structures and early lesions are reconstructed in the 3D space for better visualization. Finally, the severity of each image is evaluated based on the international criteria of diabetic retinopathy. The system has been tested on public databases and images from hospitals. Experimental results demonstrate that the proposed system achieves high accuracy for main structures and early lesions detection. The results of severity classification for non-proliferative diabetic retinopathy are also accurate and suitable. Our system can assist ophthalmologists for clinical diagnosis, automatic screening and course progression of patients.

Handling topological changes during elastic registration : Application to augmented reality in laparoscopic surgery.

PubMed

Paulus, Christoph J; Haouchine, Nazim; Kong, Seong-Ho; Soares, Renato Vianna; Cazier, David; Cotin, Stephane

2017-03-01

Locating the internal structures of an organ is a critical aspect of many surgical procedures. Minimally invasive surgery, associated with augmented reality techniques, offers the potential to visualize inner structures, allowing for improved analysis, depth perception or for supporting planning and decision systems. Most of the current methods dealing with rigid or non-rigid augmented reality make the assumption that the topology of the organ is not modified. As surgery relies essentially on cutting and dissection of anatomical structures, such methods are limited to the early stages of the surgery. We solve this shortcoming with the introduction of a method for physics-based elastic registration using a single view from a monocular camera. Singularities caused by topological changes are detected and propagated to the preoperative model. This significantly improves the coherence between the actual laparoscopic view and the model and provides added value in terms of navigation and decision-making, e.g., by overlaying the internal structures of an organ on the laparoscopic view. Our real-time augmentation method is assessed on several scenarios, using synthetic objects and real organs. In all cases, the impact of our approach is demonstrated, both qualitatively and quantitatively ( http://www.open-cas.org/?q=PaulusIJCARS16 ). The presented approach tackles the challenge of localizing internal structures throughout a complete surgical procedure, even after surgical cuts. This information is crucial for surgeons to improve the outcome for their surgical procedure and avoid complications.

Kinematics of Mass Transport Deposits revealed by magnetic fabrics

NASA Astrophysics Data System (ADS)

Weinberger, R.; Levi, T.; Alsop, G. I.; Marco, S.

2017-08-01

The internal deformation and movement directions of Mass Transport Deposits (MTDs) are key factors in understanding the kinematics and dynamics of their emplacement. Although these are relatively easy to recover from well-bedded sediments, they are more difficult to deduce from massive beds without visible strain markers. In order to test the applicability of using anisotropy of magnetic susceptibility (AMS) to determine MTD movement, we compare AMS fabrics, with structural measurements of visible kinematic indicators. Our case study involves the structural analysis of slumped lake sediments extensively exposed in MTDs within the Dead Sea Basin. Structural analyses of MTDs outcropping for >100 km reveal radial transport directions toward the basin depocenter. We show that the AMS fabrics display the same transport directions as inferred from structural analyses. Based on this similarity, we outline a robust procedure to obtain the transport direction of slumped MTDs from AMS fabrics. Variations in the magnetic fabrics and anisotropies in fold-thrust systems within the slumps match the various structural domains. We therefore suggest that magnetic fabrics and anisotropy variations in drill cores may reflect internal deformation within the slumps rather than different slumps. Obtaining magnetic fabrics from MTDs provides a viable way to infer the transport directions and internal deformation of MTDs and reconstruct the basin depocenter in ancient settings. The present results also have implications beyond the kinematics of MTDs, as their geometry resembles fold-thrust systems in other geological settings, scales, and tectonic environments.

Solid Modeling of Crew Exploration Vehicle Structure Concepts for Mass Optimization

NASA Technical Reports Server (NTRS)

Mukhopadhyay, Vivek

2006-01-01

Parametric solid and surface models of the crew exploration vehicle (CEV) command module (CM) structure concepts are developed for rapid finite element analyses, structural sizing and estimation of optimal structural mass. The effects of the structural configuration and critical design parameters on the stress distribution are visualized, examined to arrive at an efficient design. The CM structural components consisted of the outer heat shield, inner pressurized crew cabin, ring bulkhead and spars. For this study only the internal cabin pressure load case is considered. Component stress, deflection, margins of safety and mass are used as design goodness criteria. The design scenario is explored by changing the component thickness parameters and materials until an acceptable design is achieved. Aluminum alloy, titanium alloy and an advanced composite material properties are considered for the stress analysis and the results are compared as a part of lessons learned and to build up a structural component sizing knowledge base for the future CEV technology support. This independent structural analysis and the design scenario based optimization process may also facilitate better CM structural definition and rapid prototyping.

26 CFR 1.444-4 - Tiered structure.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 6 2010-04-01 2010-04-01 false Tiered structure. 1.444-4 Section 1.444-4 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Accounting Periods § 1.444-4 Tiered structure. (a) Electing small business trusts. For...

A nucleobase-centered coarse-grained representation for structure prediction of RNA motifs

PubMed Central

Poblete, Simón; Bottaro, Sandro; Bussi, Giovanni

2018-01-01

Abstract We introduce the SPlit-and-conQueR (SPQR) model, a coarse-grained (CG) representation of RNA designed for structure prediction and refinement. In our approach, the representation of a nucleotide consists of a point particle for the phosphate group and an anisotropic particle for the nucleoside. The interactions are, in principle, knowledge-based potentials inspired by the \\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{upgreek} \\usepackage{mathrsfs} \\setlength{\\oddsidemargin}{-69pt} \\begin{document} }{}$\\mathcal {E}$\\end{document}SCORE function, a base-centered scoring function. However, a special treatment is given to base-pairing interactions and certain geometrical conformations which are lost in a raw knowledge-based model. This results in a representation able to describe planar canonical and non-canonical base pairs and base–phosphate interactions and to distinguish sugar puckers and glycosidic torsion conformations. The model is applied to the folding of several structures, including duplexes with internal loops of non-canonical base pairs, tetraloops, junctions and a pseudoknot. For the majority of these systems, experimental structures are correctly predicted at the level of individual contacts. We also propose a method for efficiently reintroducing atomistic detail from the CG representation. PMID:29272539

Geometric parameter analysis to predetermine optimal radiosurgery technique for the treatment of arteriovenous malformation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mestrovic, Ante; Clark, Brenda G.; Department of Medical Physics, British Columbia Cancer Agency, Vancouver, British Columbia

2005-11-01

Purpose: To develop a method of predicting the values of dose distribution parameters of different radiosurgery techniques for treatment of arteriovenous malformation (AVM) based on internal geometric parameters. Methods and Materials: For each of 18 previously treated AVM patients, four treatment plans were created: circular collimator arcs, dynamic conformal arcs, fixed conformal fields, and intensity-modulated radiosurgery. An algorithm was developed to characterize the target and critical structure shape complexity and the position of the critical structures with respect to the target. Multiple regression was employed to establish the correlation between the internal geometric parameters and the dose distribution for differentmore » treatment techniques. The results from the model were applied to predict the dosimetric outcomes of different radiosurgery techniques and select the optimal radiosurgery technique for a number of AVM patients. Results: Several internal geometric parameters showing statistically significant correlation (p < 0.05) with the treatment planning results for each technique were identified. The target volume and the average minimum distance between the target and the critical structures were the most effective predictors for normal tissue dose distribution. The structure overlap volume with the target and the mean distance between the target and the critical structure were the most effective predictors for critical structure dose distribution. The predicted values of dose distribution parameters of different radiosurgery techniques were in close agreement with the original data. Conclusions: A statistical model has been described that successfully predicts the values of dose distribution parameters of different radiosurgery techniques and may be used to predetermine the optimal technique on a patient-to-patient basis.« less

Damage criticality and inspection concerns of composite-metallic aircraft structures under blunt impact

NASA Astrophysics Data System (ADS)

Zou, D.; Haack, C.; Bishop, P.; Bezabeh, A.

2015-04-01

Composite aircraft structures such as fuselage and wings are subject to impact from many sources. Ground service equipment (GSE) vehicles are regarded as realistic sources of blunt impact damage, where the protective soft rubber is used. With the use of composite materials, blunt impact damage is of special interest, since potential significant structural damage may be barely visible or invisible on the structure's outer surface. Such impact can result in local or non-local damage, in terms of internal delamination in skin, interfacial delamination between stiffeners and skin, and fracture of internal reinforced component such as stringers and frames. The consequences of these events result in aircraft damage, delays, and financial cost to the industry. Therefore, it is necessary to understand the criticality of damage under this impact and provide reliable recommendations for safety and inspection technologies. This investigation concerns a composite-metallic 4-hat-stiffened and 5-frame panel, designed to represent a fuselage structure panel generic to the new generation of composite aircraft. The test fixtures were developed based on the correlation between finite element analyses of the panel model and the barrel model. Three static tests at certain amount of impact energy were performed, in order to improve the understanding of the influence of the variation in shear ties, and the added rotational stiffness. The results of this research demonstrated low velocity high mass impacts on composite aircraft fuselages beyond 82.1 kN of impact load, which may cause extensive internal structural damage without clear visual detectability on the external skin surface.

Quality appraisal of generic self-reported instruments measuring health-related productivity changes: a systematic review

PubMed Central

2014-01-01

Background Health impairments can result in disability and changed work productivity imposing considerable costs for the employee, employer and society as a whole. A large number of instruments exist to measure health-related productivity changes; however their methodological quality remains unclear. This systematic review critically appraised the measurement properties in generic self-reported instruments that measure health-related productivity changes to recommend appropriate instruments for use in occupational and economic health practice. Methods PubMed, PsycINFO, Econlit and Embase were systematically searched for studies whereof: (i) instruments measured health-related productivity changes; (ii) the aim was to evaluate instrument measurement properties; (iii) instruments were generic; (iv) ratings were self-reported; (v) full-texts were available. Next, methodological quality appraisal was based on COSMIN elements: (i) internal consistency; (ii) reliability; (iii) measurement error; (iv) content validity; (v) structural validity; (vi) hypotheses testing; (vii) cross-cultural validity; (viii) criterion validity; and (ix) responsiveness. Recommendations are based on evidence syntheses. Results This review included 25 articles assessing the reliability, validity and responsiveness of 15 different generic self-reported instruments measuring health-related productivity changes. Most studies evaluated criterion validity, none evaluated cross-cultural validity and information on measurement error is lacking. The Work Limitation Questionnaire (WLQ) was most frequently evaluated with moderate respectively strong positive evidence for content and structural validity and negative evidence for reliability, hypothesis testing and responsiveness. Less frequently evaluated, the Stanford Presenteeism Scale (SPS) showed strong positive evidence for internal consistency and structural validity, and moderate positive evidence for hypotheses testing and criterion validity. The Productivity and Disease Questionnaire (PRODISQ) yielded strong positive evidence for content validity, evidence for other properties is lacking. The other instruments resulted in mostly fair-to-poor quality ratings with limited evidence. Conclusions Decisions based on the content of the instrument, usage purpose, target country and population, and available evidence are recommended. Until high-quality studies are in place to accurately assess the measurement properties of the currently available instruments, the WLQ and, in a Dutch context, the PRODISQ are cautiously preferred based on its strong positive evidence for content validity. Based on its strong positive evidence for internal consistency and structural validity, the SPS is cautiously recommended. PMID:24495301

Peptide inhibitors of botulinum neurotoxin serotype A: design, inhibition, cocrystal structures, structure-activity relationship and pharmacophore modeling.

PubMed

Kumar, Gyanendra; Kumaran, Desigan; Ahmed, S Ashraf; Swaminathan, Subramanyam

2012-05-01

Clostridium botulinum neurotoxins are classified as Category A bioterrorism agents by the Centers for Disease Control and Prevention (CDC). The seven serotypes (A-G) of the botulinum neurotoxin, the causative agent of the disease botulism, block neurotransmitter release by specifically cleaving one of the three SNARE (soluble N-ethylmaleimide-sensitive factor attachment protein receptor) proteins and induce flaccid paralysis. Using a structure-based drug-design approach, a number of peptide inhibitors were designed and their inhibitory activity against botulinum serotype A (BoNT/A) protease was determined. The most potent peptide, RRGF, inhibited BoNT/A protease with an IC(50) of 0.9 µM and a K(i) of 358 nM. High-resolution crystal structures of various peptide inhibitors in complex with the BoNT/A protease domain were also determined. Based on the inhibitory activities and the atomic interactions deduced from the cocrystal structures, the structure-activity relationship was analyzed and a pharmacophore model was developed. Unlike the currently available models, this pharmacophore model is based on a number of enzyme-inhibitor peptide cocrystal structures and improved the existing models significantly, incorporating new features. © 2012 International Union of Crystallography

The drivers of corporate environment inputs: Based on neo-institution theory evidence from Chinese listed biological and other companies.

PubMed

Guo, Rui; Tao, Lan; Yan, Liang; Chen, Lianfang; Wang, Haijun

2014-09-01

From corporate internal governance structure and external institutional environment, this study uses a legitimacy perspective of intuitional theory to analyze the main influence factors on corporate environmental protection inputs and propose some hypotheses. With the establishment of empirical models, it analyzes the data of 2004-2009 listed biological and other companies in China to test the hypotheses. The findings are concluded that in internal institutional environment, the nature of the controlling shareholder, the proportion of the first shareholder in the ownership structure, the combination of chairman and general manager in board efficiency and the intensity of environmental laws and regulations of the industry in external institutional environment have an significant impact on the behaviors of corporate environmental protection inputs.

Sources of motivation, interpersonal conflict management styles, and leadership effectiveness: a structural model.

PubMed

Barbuto, John E; Xu, Ye

2006-02-01

126 leaders and 624 employees were sampled to test the relationship between sources of motivation and conflict management styles of leaders and how these variables influence effectiveness of leadership. Five sources of motivation measured by the Motivation Sources Inventory were tested-intrinsic process, instrumental, self-concept external, self-concept internal, and goal internalization. These sources of work motivation were associated with Rahim's modes of interpersonal conflict management-dominating, avoiding, obliging, complying, and integrating-and to perceived leadership effectiveness. A structural equation model tested leaders' conflict management styles and leadership effectiveness based upon different sources of work motivation. The model explained variance for obliging (65%), dominating (79%), avoiding (76%), and compromising (68%), but explained little variance for integrating (7%). The model explained only 28% of the variance in leader effectiveness.

Responding to rural social care needs: older people empowering themselves, others and their community.

PubMed

Walsh, Kieran; O'Shea, Eamon

2008-12-01

Older adult active retirement groups encompass health promotion, social and community psychological potential. However, little is known about the internal dynamics of these groups or their contribution to individual well-being and the community. This paper examines the Third Age Foundation as an example of one such group operating in a rural area in Ireland and explores the various relationships at work internally and externally. Methodology included: structured and semi-structured interviews, focus groups and a postal survey. A substantial contribution to members' well-being and community competence and cohesion was found. Findings are discussed in reference to the importance of individual and community empowerment, sustainability, social entrepreneurship/leadership and the potential of such models to support community-based living in older age.

Validity Evidence for the Neuro-Endoscopic Ventriculostomy Assessment Tool (NEVAT).

PubMed

Breimer, Gerben E; Haji, Faizal A; Cinalli, Giuseppe; Hoving, Eelco W; Drake, James M

2017-02-01

Growing demand for transparent and standardized methods for evaluating surgical competence prompted the construction of the Neuro-Endoscopic Ventriculostomy Assessment Tool (NEVAT). To provide validity evidence of the NEVAT by reporting on the tool's internal structure and its relationship with surgical expertise during simulation-based training. The NEVAT was used to assess performance of trainees and faculty at an international neuroendoscopy workshop. All participants performed an endoscopic third ventriculostomy (ETV) on a synthetic simulator. Participants were simultaneously scored by 2 raters using the NEVAT procedural checklist and global rating scale (GRS). Evidence of internal structure was collected by calculating interrater reliability and internal consistency of raters' scores. Evidence of relationships with other variables was collected by comparing the ETV performance of experts, experienced trainees, and novices using Jonckheere's test (evidence of construct validity). Thirteen experts, 11 experienced trainees, and 10 novices participated. The interrater reliability by the intraclass correlation coefficient for the checklist and GRS was 0.82 and 0.94, respectively. Internal consistency (Cronbach's α) for the checklist and the GRS was 0.74 and 0.97, respectively. Median scores with interquartile range on the checklist and GRS for novices, experienced trainees, and experts were 0.69 (0.58-0.86), 0.85 (0.63-0.89), and 0.85 (0.81-0.91) and 3.1 (2.5-3.8), 3.7 (2.2-4.3) and 4.6 (4.4-4.9), respectively. Jonckheere's test showed that the median checklist and GRS score increased with performer expertise ( P = .04 and .002, respectively). This study provides validity evidence for the NEVAT to support its use as a standardized method of evaluating neuroendoscopic competence during simulation-based training. Copyright © 2016 by the Congress of Neurological Surgeons

Age-Sex Structure of the Population and Demographic Processes in Environmentally Challenged Mining Region (on the example of Kemerovo region)

NASA Astrophysics Data System (ADS)

Leshukov, Timofey; Brel, Olga; Zaytseva, Anna; Kaizer, Philipp; Makarov, Kirill

2017-11-01

The main goal of the article is to show the influence of the age-sex structure of the population on the basic demographic processes in the Kemerovo region. During research the authors have established correlation links between the sex-age structure of the population and the main demographic indicators (birth and mortality rate, morbidity rate, migration and others) based on the analysis of official statistical data. The direct influence of internal and external factors on the age-sex structure of the population is revealed. Conclusions about the impact of demographic processes on the sex-age structure of the population of the Kemerovo region are drawn.

Structural Studies of CH_3SiF_2-X (x = Nco, Cl) by Microwave Spectroscopy

NASA Astrophysics Data System (ADS)

Guirgis, Gamil A.; Gause, Korreda K.; Seifert, Nathan A.; Zaleski, Daniel P.; Pate, Brooks H.; Palmer, Michael H.; Peebles, Rebecca A.; Peebles, Sean A.; Elmuti, Lena F.; Obenchain, Daniel A.

2012-06-01

The structures of CH_3SiF_2-NCO and CH_3SiF_2-Cl have been studied by molecular rotational spectroscopy in the 6.5-18 GHz band. The rotational spectrum was measured by cavity Fourier transform microwave (FTMW) and chirped-pulse FTMW spectroscopy. The experiment targeted the study of CH_3SiF_2-NCO, but CH_3SiF_2-Cl was also observed as an impurity. Due to the dynamic range achieved on these spectra, all isotopologs with natural abundance ≥0.2% were assigned, which includes two doubly-substituted isotopologs for the chloride (29Si/37Cl and 30Si/37Cl). Strategies for obtaining the molecular structure for these two molecules using either a Kraitchman analysis (to obtain a partial substitution structure) or r_0 analysis (with additional constraints on the structure supplied by the theoretical structure) will be discussed. Derived structural parameters for the CH_3-SiF_2-X base structure are the same for the two compounds. The hyperfine and internal rotation effects in the spectra have been analyzed for all isotopologs and the Hamiltonian parameters are in very good agreement with ab initio results. The barriers to methyl group internal rotation for the two compounds 446(50) cm-1 and 463(3) cm-1 and are independent of the isotopic structure of the heavy atom frame.

Direct Associations or Internal Transformations? Exploring the Mechanisms Underlying Sequential Learning Behavior

PubMed Central

Gureckis, Todd M.; Love, Bradley C.

2009-01-01

We evaluate two broad classes of cognitive mechanisms that might support the learning of sequential patterns. According to the first, learning is based on the gradual accumulation of direct associations between events based on simple conditioning principles. The other view describes learning as the process of inducing the transformational structure that defines the material. Each of these learning mechanisms predict differences in the rate of acquisition for differently organized sequences. Across a set of empirical studies, we compare the predictions of each class of model with the behavior of human subjects. We find that learning mechanisms based on transformations of an internal state, such as recurrent network architectures (e.g., Elman, 1990), have difficulty accounting for the pattern of human results relative to a simpler (but more limited) learning mechanism based on learning direct associations. Our results suggest new constraints on the cognitive mechanisms supporting sequential learning behavior. PMID:20396653

International Medical Collaboration: Lessons from Cuba

PubMed Central

Castelló González, Mauro; Pons Vásquez, Reinaldo; Rodriguez Bencomo, David; Choonara, Imti

2016-01-01

Over 50,000 Cuban health professionals are currently working overseas in 67 different countries. They work in conjunction with local health professionals. The majority work in primary care in deprived areas. The aim is to reduce morbidity and mortality but also improve health in the long term by training local health professionals, and building both institutions and a structure to deliver health care alongside educating the local population. Cuba is a small, middle-income country. It has, however, made a significant international contribution in relation to medical collaboration. Cuba’s international collaboration is based on the principles of social justice and equity for all. It has set an example for other countries to emulate. PMID:27763571

The need for international nursing diagnosis research and a theoretical framework.

PubMed

Lunney, Margaret

2008-01-01

To describe the need for nursing diagnosis research and a theoretical framework for such research. A linguistics theory served as the foundation for the theoretical framework. Reasons for additional nursing diagnosis research are: (a) file names are needed for implementation of electronic health records, (b) international consensus is needed for an international classification, and (c) continuous changes occur in clinical practice. A theoretical framework used by the author is explained. Theoretical frameworks provide support for nursing diagnosis research. Linguistics theory served as an appropriate exemplar theory to support nursing research. Additional nursing diagnosis studies based upon a theoretical framework are needed and linguistics theory can provide an appropriate structure for this research.

Development of a Digital-Based Instrument to Assess Perceived Motor Competence in Children: Face Validity, Test-Retest Reliability, and Internal Consistency

PubMed Central

Palmer, Kara K.

2017-01-01

Assessing children’s perceptions of their movement abilities (i.e., perceived competence) is traditionally done using picture scales—Pictorial Scale of Perceived Competence and Acceptance for Young Children or Pictorial Scale of Perceived Movement Skill Competence. Pictures fail to capture the temporal components of movement. To address this limitation, we created a digital-based instrument to assess perceived motor competence: the Digital Scale of Perceived Motor Competence. The purpose of this study was to determine the validity, reliability, and internal consistency of the Digital-based Scale of Perceived Motor Skill Competence. The Digital-based Scale of Perceived Motor Skill Competence is based on the twelve fundamental motor skills from the Test of Gross Motor Development-2nd Edition with a similar layout and item structure as the Pictorial Scale of Perceived Movement Skill Competence. Face Validity of the instrument was examined in Phase I (n = 56; Mage = 8.6 ± 0.7 years, 26 girls). Test-retest reliability and internal consistency were assessed in Phase II (n = 54, Mage = 8.7 years ± 0.5 years, 26 girls). Intra-class correlations (ICC) and Cronbach’s alpha were conducted to determine test-retest reliability and internal consistency for all twelve skills along with locomotor and object control subscales. The Digital Scale of Perceived Motor Competence demonstrates excellent test-retest reliability (ICC = 0.83, total; ICC = 0.77, locomotor; ICC = 0.79, object control) and acceptable/good internal consistency (α = 0.62, total; α = 0.57, locomotor; α = 0.49, object control). Findings provide evidence of the reliability of the three level digital-based instrument of perceived motor competence for older children. PMID:29910408

Prominence plasma and magnetic field structure - A coordinated observation with IRIS, Hinode and THEMIS

NASA Astrophysics Data System (ADS)

Schmieder, Brigitte; Labrosse, Nicolas; Levens, Peter; Lopez Ariste, Arturo

2016-07-01

During an international campaign in 2014, utilising both space-based (IRIS and Hinode) and ground-based (THEMIS) instruments, we focused on observing prominences. We compare IRIS observations with those of Hinode (EIS and SOT) in order to build a more complete picture of the prominence structure for a quiescent prominence observed on 15 July 2014, identified to have tornado-like structure. THEMIS provides valuable information on the orientation and strength of the internal magnetic field. Here we find there is almost ubiquitously horizontal field with respect to the local limb, with possibly a turbulent component. The Mg II lines form the majority of our IRIS analysis, with a mixture of reversed and non-reversed profiles present in the prominence spectra. Comparing the differences between the Mg II data from IRIS and the Ca II images from Hinode/SOT provides an intriguing insight into the prominence legs in these channels. We present plasma diagnostics from IRIS, with line of sight velocities of around 10 km/s in either direction along the magnetic loops of material in the front of the prominence, and line widths comparable to those found for prominences by previous authors (e.g. Schmieder et al. 2014). We also take a look into the lines formed at higher, coronal plasma temperatures, as seen by Hinode/EIS, to compare plasma structures at a full range of temperatures.

RNA secondary structure prediction using soft computing.

PubMed

Ray, Shubhra Sankar; Pal, Sankar K

2013-01-01

Prediction of RNA structure is invaluable in creating new drugs and understanding genetic diseases. Several deterministic algorithms and soft computing-based techniques have been developed for more than a decade to determine the structure from a known RNA sequence. Soft computing gained importance with the need to get approximate solutions for RNA sequences by considering the issues related with kinetic effects, cotranscriptional folding, and estimation of certain energy parameters. A brief description of some of the soft computing-based techniques, developed for RNA secondary structure prediction, is presented along with their relevance. The basic concepts of RNA and its different structural elements like helix, bulge, hairpin loop, internal loop, and multiloop are described. These are followed by different methodologies, employing genetic algorithms, artificial neural networks, and fuzzy logic. The role of various metaheuristics, like simulated annealing, particle swarm optimization, ant colony optimization, and tabu search is also discussed. A relative comparison among different techniques, in predicting 12 known RNA secondary structures, is presented, as an example. Future challenging issues are then mentioned.

Research on tomato seed vigor based on X-ray digital image

NASA Astrophysics Data System (ADS)

Zhao, Xueguan; Gao, Yuanyuan; Wang, Xiu; Li, Cuiling; Wang, Songlin; Feng, Qinghun

2016-10-01

Seed size, interior abnormal and damage of the tomato seeds will affect the germination. The purpose of this paper was to study the relationship between the internal morphology, seed size and seed germination of tomato. The preprocessing algorithm of X-ray image of tomato seeds was studied, and the internal structure characteristics of tomato seeds were extracted by image processing algorithm. By developing the image processing software, the cavity area between embryo and endosperm and the whole seed zone were determined. According to the difference of area of embryo and endosperm and Internal structural condition, seeds were divided into six categories, Respectively for three kinds of tomato seed germination test, the relationship between seed vigor and seed size , internal free cavity was explored through germination experiment. Through seedling evaluation test found that X-ray image analysis provide a perfect view of the inside part of the seed and seed morphology research methods. The larger the area of the endosperm and the embryo, the greater the probability of healthy seedlings sprout from the same size seeds. Mechanical damage adversely effects on seed germination, deterioration of tissue prone to produce week seedlings and abnormal seedlings.

Human substantia nigra and ventral tegmental area involvement in computing social error signals during the ultimatum game

PubMed Central

Hétu, Sébastien; Luo, Yi; D’Ardenne, Kimberlee; Lohrenz, Terry

2017-01-01

Abstract As models of shared expectations, social norms play an essential role in our societies. Since our social environment is changing constantly, our internal models of it also need to change. In humans, there is mounting evidence that neural structures such as the insula and the ventral striatum are involved in detecting norm violation and updating internal models. However, because of methodological challenges, little is known about the possible involvement of midbrain structures in detecting norm violation and updating internal models of our norms. Here, we used high-resolution cardiac-gated functional magnetic resonance imaging and a norm adaptation paradigm in healthy adults to investigate the role of the substantia nigra/ventral tegmental area (SN/VTA) complex in tracking signals related to norm violation that can be used to update internal norms. We show that the SN/VTA codes for the norm’s variance prediction error (PE) and norm PE with spatially distinct regions coding for negative and positive norm PE. These results point to a common role played by the SN/VTA complex in supporting both simple reward-based and social decision making. PMID:28981876

Three-and-a-half-factor model? The genetic and environmental structure of the CBCL/6-18 internalizing grouping.

PubMed

Franić, Sanja; Dolan, Conor V; Borsboom, Denny; van Beijsterveldt, Catherina E M; Boomsma, Dorret I

2014-05-01

In the present article, multivariate genetic item analyses were employed to address questions regarding the ontology and the genetic and environmental etiology of the Anxious/Depressed, Withdrawn, and Somatic Complaints syndrome dimensions of the Internalizing grouping of the Child Behavior Checklist/6-18 (CBCL/6-18). Using common and independent pathway genetic factor modeling, it was examined whether these syndrome dimensions can be ascribed a realist ontology. Subsequently, the structures of the genetic and environmental influences giving rise to the observed symptom covariation were examined. Maternal ratings of a population-based sample of 17,511 Dutch twins of mean age 7.4 (SD = 0.4) on the items of the Internalizing grouping of the Dutch CBCL/6-18 were analyzed. Applications of common and independent pathway modeling demonstrated that the Internalizing syndrome dimensions may be better understood as a composite of unconstrained genetic and environmental influences than as causally relevant entities generating the observed symptom covariation. Furthermore, the results indicate a common genetic basis for anxiety, depression, and withdrawn behavior, with the distinction between these syndromes being driven by the individual-specific environment. Implications for the substantive interpretation of these syndrome dimensions are discussed.

The curious case of Mercury's internal structure

NASA Astrophysics Data System (ADS)

Hauck, Steven A.; Margot, Jean-Luc; Solomon, Sean C.; Phillips, Roger J.; Johnson, Catherine L.; Lemoine, Frank G.; Mazarico, Erwan; McCoy, Timothy J.; Padovan, Sebastiano; Peale, Stanton J.; Perry, Mark E.; Smith, David E.; Zuber, Maria T.

2013-06-01

The recent determination of the gravity field of Mercury and new Earth-based radar observations of the planet's spin state afford the opportunity to explore Mercury's internal structure. These observations provide estimates of two measures of the radial mass distribution of Mercury: the normalized polar moment of inertia and the fractional polar moment of inertia of the solid portion of the planet overlying the liquid core. Employing Monte Carlo techniques, we calculate several million models of the radial density structure of Mercury consistent with its radius and bulk density and constrained by these moment of inertia parameters. We estimate that the top of the liquid core is at a radius of 2020 ± 30 km, the mean density above this boundary is 3380 ± 200 kg m-3, and the density below the boundary is 6980 ± 280 kg m-3. We find that these internal structure parameters are robust across a broad range of compositional models for the core and planet as a whole. Geochemical observations of Mercury's surface by MESSENGER indicate a chemically reducing environment that would favor the partitioning of silicon or both silicon and sulfur into the metallic core during core-mantle differentiation. For a core composed of Fe-S-Si materials, the thermodynamic properties at elevated pressures and temperatures suggest that an FeS-rich layer could form at the top of the core and that a portion of it may be presently solid.

Psychometric analysis of an eating behaviour questionnaire for an overweight and obese Chinese population in Singapore.

PubMed

Chong, Mary Foong-Fong; Ayob, M Na'im M; Chong, Kok Joon; Tai, E-Shyong; Khoo, Chin Meng; Leow, Melvin Khee-Shing; Lee, Yung Seng; Tham, Kwang Wei; Venkataraman, Kavita; Meaney, Michael J; Wee, Hwee Lin; Khoo, Eric Yin-Hao

2016-06-01

Previous studies reveal that the Three-Factor Eating Questionnaire (TFEQ), which assesses eating behaviour, performs differently across population groups and cultures. We aimed to identify the factor structure that is most appropriate to capture eating behaviour in an overweight and obese Chinese population in Singapore. TFEQ-51 was administered to 444 Chinese subjects pooled from four separate studies and scored according to various alternative versions of the TFEQ. Confirmatory factor analyses and goodness of fit indices were used to determine the most appropriate factor structure. Known-group validity analyses were conducted. Niemeier's Disinhibition Factors and the TFEQ-R18 factor structures were found to be the most applicable in our population based on goodness of fit indices, with a x(2)/df ratio of <3, RMSEA of ≤ 0.6 and a CFI value of >0.9 for both. Only two of three factors (Emotional Eating and Uncontrolled Eating) of the TFEQ-R18 showed good internal consistency, while none of Niemeier's Disinhibition Factors showed good internal consistency. Known-group validity showed that Emotional Eating and Internal Disinhibition were significantly associated with higher BMI. We found that the TFEQ-R18 factor structure is the most appropriate and practical for use in measuring eating behaviour in an overweight and obese Chinese population in Singapore. Copyright © 2016 Elsevier Ltd. All rights reserved.

Negotiating Potentials and Limitations in Education in Transnational Migration Contexts: A Case Study

ERIC Educational Resources Information Center

Chamakalayil, Lalitha; Riegel, Christine

2016-01-01

Education systems reproduce social inequality based on social class, gender, and minority ethnicity ascriptions, and are organized along national structures. This paper explores, how migration and international mobility shape an individuals scope of possibilities in the context of education. We analyze how societal and institutional possibilities…

Factors Associated with Leisure Activity among Young Adults with Developmental Disabilities

ERIC Educational Resources Information Center

Van Naarden Braun, Kim; Yeargin-Allsopp, Marshalyn; Lollar, Donald

2006-01-01

The framework of the International Classification of Functioning, Disability, and Health (ICF) was applied to examine the factors associated with childhood impairment and leisure activity. Information on leisure activity was obtained using a structured questionnaire from a population-based cohort of young adults with childhood impairment. The…

Attachment Working Models as Unconscious Structures: An Experimental Test

ERIC Educational Resources Information Center

Maier, Markus A.; Bernier, Annie; Pekrun, Reinhard; Zimmermann, Peter; Grossmann, Klaus E.

2004-01-01

Internal working models of attachment (IWMs) are presumed to be largely "unconscious" representations of childhood attachment experiences. Several instruments have been developed to assess IWMs; some of them are based on self-report and others on narrative interview techniques. This study investigated the capacity of a self-report measure, the…

Dynamic Weather Routes Architecture Overview

NASA Technical Reports Server (NTRS)

Eslami, Hassan; Eshow, Michelle

2014-01-01

Dynamic Weather Routes Architecture Overview, presents the high level software architecture of DWR, based on the CTAS software framework and the Direct-To automation tool. The document also covers external and internal data flows, required dataset, changes to the Direct-To software for DWR, collection of software statistics, and the code structure.

The Dynamics of Perception and Action

ERIC Educational Resources Information Center

Warren, William H.

2006-01-01

How might one account for the organization in behavior without attributing it to an internal control structure? The present article develops a theoretical framework called behavioral dynamics that integrates an information-based approach to perception with a dynamical systems approach to action. For a given task, the agent and its environment are…

What Counts as Validity Evidence? Examples and Prevalence in a Systematic Review of Simulation-Based Assessment

ERIC Educational Resources Information Center

Cook, David A.; Zendejas, Benjamin; Hamstra, Stanley J.; Hatala, Rose; Brydges, Ryan

2014-01-01

Ongoing transformations in health professions education underscore the need for valid and reliable assessment. The current standard for assessment validation requires evidence from five sources: content, response process, internal structure, relations with other variables, and consequences. However, researchers remain uncertain regarding the types…

The German Passive: Analysis and Teaching Technique.

ERIC Educational Resources Information Center

Griffen, T. D.

1981-01-01

Proposes an analysis of German passive based upon internal structure rather than translation conventions from Latin and Greek. Claims that this approach leads to a description of the perfect participle as an adjectival complement, which eliminates the classification of a passive voice for German and simplifies the learning task. (MES)

Wheat for Kids! [and] Teacher's Guide.

ERIC Educational Resources Information Center

Idaho Wheat Commission, Boise.

"Wheat for Kids" contains information at the elementary school level about: the structure of the wheat kernel; varieties of wheat and their uses; growing wheat; making wheat dough; the U.S. Department of Agriculture Food Guide Pyramid and nutrition; Idaho's part of the international wheat market; recipes; and word games based on the…

Development and validation of a new population-based simulation model of osteoarthritis in New Zealand.

PubMed

Wilson, R; Abbott, J H

2018-04-01

To describe the construction and preliminary validation of a new population-based microsimulation model developed to analyse the health and economic burden and cost-effectiveness of treatments for knee osteoarthritis (OA) in New Zealand (NZ). We developed the New Zealand Management of Osteoarthritis (NZ-MOA) model, a discrete-time state-transition microsimulation model of the natural history of radiographic knee OA. In this article, we report on the model structure, derivation of input data, validation of baseline model parameters against external data sources, and validation of model outputs by comparison of the predicted population health loss with previous estimates. The NZ-MOA model simulates both the structural progression of radiographic knee OA and the stochastic development of multiple disease symptoms. Input parameters were sourced from NZ population-based data where possible, and from international sources where NZ-specific data were not available. The predicted distributions of structural OA severity and health utility detriments associated with OA were externally validated against other sources of evidence, and uncertainty resulting from key input parameters was quantified. The resulting lifetime and current population health-loss burden was consistent with estimates of previous studies. The new NZ-MOA model provides reliable estimates of the health loss associated with knee OA in the NZ population. The model structure is suitable for analysis of the effects of a range of potential treatments, and will be used in future work to evaluate the cost-effectiveness of recommended interventions within the NZ healthcare system. Copyright © 2018 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

Method to control residual stress in a film structure and a system thereof

DOEpatents

Parthum, Sr., Michael J.

2008-12-30

A method for controlling residual stress in a structure in a MEMS device and a structure thereof includes selecting a total thickness and an overall equivalent stress for the structure. A thickness for each of at least one set of alternating first and second layers is determined to control an internal stress with respect to a neutral axis for each of the at least alternating first and second layers and to form the structure based on the selected total thickness and the selected overall equivalent stress. Each of the at least alternating first and second layers is deposited to the determined thickness for each of the at least alternating first and second layers to form the structure.

Report on an international workshop on Cryptoexplosions and Catastrophes in the Geological Record, with a Special Focus on the Vredefort Structure

NASA Technical Reports Server (NTRS)

Reimold, W. U.

1988-01-01

Eighty-five geoscientists gathered in the heart of the Vredefort Cryptoexplosion structure to discuss and evaluate the current knowledge about mass extinctions, impact and volcanic cratering and to obtain first-hand information on the Vredefort structure and its origin. Presentations were made within 8 topical sessions: (1) the regional setting of the Vredefort structure; (2) the Vredefort structure itself; (3) deformations and microdeformations; (4) large cryptoexplosion structures; (5) the Ries Crater; (6) tektites; (7) the K-T boundary, and (8) tectonophysics of cratering. The program was rounded up by working group and plenum discussions culminating in a Workshop report emphasizing problem areas, gaps in the data base and recommendations for future research.

Development and Validation of Extract the Base: An English Derivational Morphology Test for Third through Fifth Grade Monolingual Students and Spanish-Speaking English Language Learners

ERIC Educational Resources Information Center

Goodwin, Amanda P.; Huggins, A. Corinne; Carlo, Maria; Malabonga, Valerie; Kenyon, Dorry; Louguit, Mohammed; August, Diane

2012-01-01

This study describes the development and validation of the Extract the Base test (ETB), which assesses derivational morphological awareness. Scores on this test were validated for 580 monolingual students and 373 Spanish-speaking English language learners (ELLs) in third through fifth grade. As part of the validation of the internal structure,…

Preliminary Structural Design Using Topology Optimization with a Comparison of Results from Gradient and Genetic Algorithm Methods

NASA Technical Reports Server (NTRS)

Burt, Adam O.; Tinker, Michael L.

2014-01-01

In this paper, genetic algorithm based and gradient-based topology optimization is presented in application to a real hardware design problem. Preliminary design of a planetary lander mockup structure is accomplished using these methods that prove to provide major weight savings by addressing the structural efficiency during the design cycle. This paper presents two alternative formulations of the topology optimization problem. The first is the widely-used gradient-based implementation using commercially available algorithms. The second is formulated using genetic algorithms and internally developed capabilities. These two approaches are applied to a practical design problem for hardware that has been built, tested and proven to be functional. Both formulations converged on similar solutions and therefore were proven to be equally valid implementations of the process. This paper discusses both of these formulations at a high level.

Synthesis and design of silicide intermetallic materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Petrovic, J.J.; Castro, R.G.; Butt, D.P.

1997-04-01

The overall objective of this program is to develop structural silicide-based materials with optimum combinations of elevated temperature strength/creep resistance, low temperature fracture toughness, and high temperature oxidation and corrosion resistance for applications of importance to the U.S. processing industry. A further objective is to develop silicide-based prototype industrial components. The ultimate aim of the program is to work with industry to transfer the structural silicide materials technology to the private sector in order to promote international competitiveness in the area of advanced high temperature materials and important applications in major energy-intensive U.S. processing industries. The program presently has amore » number of developing industrial connections, including a CRADA with Schuller International Inc. targeted at the area of MoSi{sub 2}-based high temperature materials and components for fiberglass melting and processing applications. The authors are also developing an interaction with the Institute of Gas Technology (IGT) to develop silicides for high temperature radiant gas burner applications, for the glass and other industries. Current experimental emphasis is on the development and characterization of MoSi{sub 2}-Si{sub 3}N{sub 4} and MoSi{sub 2}-SiC composites, the plasma spraying of MoSi{sub 2}-based materials, and the joining of MoSi{sub 2} materials to metals.« less

Fully-Enclosed Ceramic Micro-burners Using Fugitive Phase and Powder-based Processing

NASA Astrophysics Data System (ADS)

Do, Truong; Shin, Changseop; Kwon, Patrick; Yeom, Junghoon

2016-08-01

Ceramic-based microchemical systems (μCSs) are more suitable for operation under harsh environments such as high temperature and corrosive reactants compared to the more conventional μCS materials such as silicon and polymers. With the recent renewed interests in chemical manufacturing and process intensification, simple, inexpensive, and reliable ceramic manufacturing technologies are needed. The main objective of this paper is to introduce a new powder-based fabrication framework, which is a one-pot, cost-effective, and versatile process for ceramic μCS components. The proposed approach employs the compaction of metal-oxide sub-micron powders with a graphite fugitive phase that is burned out to create internal cavities and microchannels before full sintering. Pure alumina powder has been used without any binder phase, enabling more precise dimensional control and less structure shrinkage upon sintering. The key process steps such as powder compaction, graphite burnout during partial sintering, machining in a conventional machine tool, and final densification have been studied to characterize the process. This near-full density ceramic structure with the combustion chamber and various internal channels was fabricated to be used as a micro-burner for gas sensing applications.

Fully-Enclosed Ceramic Micro-burners Using Fugitive Phase and Powder-based Processing

PubMed Central

Do, Truong; Shin, Changseop; Kwon, Patrick; Yeom, Junghoon

2016-01-01

Ceramic-based microchemical systems (μCSs) are more suitable for operation under harsh environments such as high temperature and corrosive reactants compared to the more conventional μCS materials such as silicon and polymers. With the recent renewed interests in chemical manufacturing and process intensification, simple, inexpensive, and reliable ceramic manufacturing technologies are needed. The main objective of this paper is to introduce a new powder-based fabrication framework, which is a one-pot, cost-effective, and versatile process for ceramic μCS components. The proposed approach employs the compaction of metal-oxide sub-micron powders with a graphite fugitive phase that is burned out to create internal cavities and microchannels before full sintering. Pure alumina powder has been used without any binder phase, enabling more precise dimensional control and less structure shrinkage upon sintering. The key process steps such as powder compaction, graphite burnout during partial sintering, machining in a conventional machine tool, and final densification have been studied to characterize the process. This near-full density ceramic structure with the combustion chamber and various internal channels was fabricated to be used as a micro-burner for gas sensing applications. PMID:27546059

[The influence of the organizational structure on the internal controls of a foundation for cancer research, prevention and care in the interior of the state of São Paulo, Brazil].

PubMed

Bonacim, Carlos Alberto Grespam; Salgado, André Luís; Girioli, Lumila Souza; de Araujo, Adriana Maria Procópio

2011-05-01

This work focuses on a discussion about the extent to which the level of organizational structure interferes in the internal control practices of non-governmental organizations (NGOs), especially those related to health. The objective of this work was to observe the efficiency of the internal control tests applied within the organizational structure of the Foundation for Cancer Research, Prevention and Care, checking the reliability of the accounting records and operational controls. A case study in a third sector health organization was the chosen methodology. The case study involved company interviews and the analysis of confidential reports. After an evaluation of the organizational structure (of the relations between officials and volunteers) and the application of evaluation proceedings on the quality of the internal controls, the extent to which the organizational structure interferes with the internal control practices of the hospital was assessed. It was revealed that there are structured mechanisms of control in the institution, however the implementation of these controls is inadequately performed. It was further detected that the level of the organizational structure does indeed interfere in internal control practices at the entity.

Interaction of light with hematite hierarchical structures: Experiments and simulations

NASA Astrophysics Data System (ADS)

Distaso, Monica; Zhuromskyy, Oleksander; Seemann, Benjamin; Pflug, Lukas; Mačković, Mirza; Encina, Ezequiel; Taylor, Robin Klupp; Müller, Rolf; Leugering, Günter; Spiecker, Erdmann; Peschel, Ulf; Peukert, Wolfgang

2017-03-01

Mesocrystalline particles have been recognized as a class of multifunctional materials with potential applications in different fields. However, the internal organization of nanocomposite mesocrystals and its influence on the final properties have not yet been investigated. In this paper, a novel strategy based on electrodynamic simulations is developed to shed light on how the internal structure of mesocrystals influences their optical properties. In a first instance, a unified design protocol is reported for the fabrication of hematite/PVP particles with different morphologies such as pseudo-cubes, rods-like and apple-like structures and controlled particle size distributions. The optical properties of hematite/PVP mesocrystals are effectively simulated by taking their aggregate and nanocomposite structure into consideration. The superposition T-Matrix approach accounts for the aggregate nature of mesocrystalline particles and validate the effective medium approximation used in the framework of the Mie theory and electromagnetic simulation such as Finite Element Method. The approach described in our paper provides the framework to understand and predict the optical properties of mesocrystals and more general, of hierarchical nanostructured particles.

46 CFR 71.50-3 - Drydock examination, internal structural examination, underwater survey, and alternate hull exam...

Code of Federal Regulations, 2010 CFR

2010-10-01

..., underwater survey, and alternate hull exam intervals. 71.50-3 Section 71.50-3 Shipping COAST GUARD...-3 Drydock examination, internal structural examination, underwater survey, and alternate hull exam... wooden hulls must undergo two drydock and two internal structural examinations within any five year...

Compensation of Handicap and Autonomy Loss through e-Technologies and Home Automation for Elderly People in Rural Regions: An Actual Need for International Initiatives Networks

NASA Astrophysics Data System (ADS)

Billonnet, Laurent; Dumas, Jean-Michel; Desbordes, Emmanuel; Lapôtre, Bertrand

To face the problems of elderly and disabled people in a rural environment, the district of Guéret (department of Creuse, France) has set up the "Home automation and Health Pole". In association with the University of Limoges, this structure is based on the use of e-technologies together with home automation techniques. In this frame, many international collaborations attempts have started through a BSc diploma. This paper sums up these different collaborations and directions.

A finite-difference method for the variable coefficient Poisson equation on hierarchical Cartesian meshes

NASA Astrophysics Data System (ADS)

Raeli, Alice; Bergmann, Michel; Iollo, Angelo

2018-02-01

We consider problems governed by a linear elliptic equation with varying coefficients across internal interfaces. The solution and its normal derivative can undergo significant variations through these internal boundaries. We present a compact finite-difference scheme on a tree-based adaptive grid that can be efficiently solved using a natively parallel data structure. The main idea is to optimize the truncation error of the discretization scheme as a function of the local grid configuration to achieve second-order accuracy. Numerical illustrations are presented in two and three-dimensional configurations.

Research on energy stock market associated network structure based on financial indicators

NASA Astrophysics Data System (ADS)

Xi, Xian; An, Haizhong

2018-01-01

A financial market is a complex system consisting of many interacting units. In general, due to the various types of information exchange within the industry, there is a relationship between the stocks that can reveal their clear structural characteristics. Complex network methods are powerful tools for studying the internal structure and function of the stock market, which allows us to better understand the stock market. Applying complex network methodology, a stock associated network model based on financial indicators is created. Accordingly, we set threshold value and use modularity to detect the community network, and we analyze the network structure and community cluster characteristics of different threshold situations. The study finds that the threshold value of 0.7 is the abrupt change point of the network. At the same time, as the threshold value increases, the independence of the community strengthens. This study provides a method of researching stock market based on the financial indicators, exploring the structural similarity of financial indicators of stocks. Also, it provides guidance for investment and corporate financial management.

"Why Even Bother; They Are Not Going to Do It?" The Structural Roots of Racism and Discrimination in Lactation Care.

PubMed

Thomas, Erin V

2018-03-01

Through semi-structured interviews with 36 International Board Certified Lactation Consultants (IBCLCs) who assist mothers with breastfeeding, this study takes a systematic look at breastfeeding disparities. Specifically, this study documents race-based discrimination against patients in the course of lactation care and links the implicit bias literature to breastfeeding disparities. IBCLCs report instances of race-based discrimination against patients such as unequal care provided to patients of color and overt racist remarks said in front of or behind patient's backs. This study connects patient discrimination in lactation to institutional inequality and offers suggestions to address these inequities.

A dynamic structural model of expanded RNA CAG repeats: A refined X-ray structure and computational investigations using molecular dynamics and umbrella sampling simulations

PubMed Central

Yildirim, Ilyas; Park, Hajeung; Disney, Matthew D.; Schatz, George C.

2013-01-01

One class of functionally important RNA is repeating transcripts that cause disease through various mechanisms. For example, expanded r(CAG) repeats can cause Huntington’s and other disease through translation of toxic proteins. Herein, crystal structure of r[5ʹUUGGGC(CAG)3GUCC]2, a model of CAG expanded transcripts, refined to 1.65 Å resolution is disclosed that show both anti-anti and syn-anti orientations for 1×1 nucleotide AA internal loops. Molecular dynamics (MD) simulations using Amber force field in explicit solvent were run for over 500 ns on model systems r(5ʹGCGCAGCGC)2 (MS1) and r(5ʹCCGCAGCGG)2 (MS2). In these MD simulations, both anti-anti and syn-anti AA base pairs appear to be stable. While anti-anti AA base pairs were dynamic and sampled multiple anti-anti conformations, no syn-anti↔anti-anti transformations were observed. Umbrella sampling simulations were run on MS2, and a 2D free energy surface was created to extract transformation pathways. In addition, over 800 ns explicit solvent MD simulation was run on r[5ʹGGGC(CAG)3GUCC]2, which closely represents the refined crystal structure. One of the terminal AA base pairs (syn-anti conformation), transformed to anti-anti conformation. The pathway followed in this transformation was the one predicted by umbrella sampling simulations. Further analysis showed a binding pocket near AA base pairs in syn-anti conformations. Computational results combined with the refined crystal structure show that global minimum conformation of 1×1 nucleotide AA internal loops in r(CAG) repeats is anti-anti but can adopt syn-anti depending on the environment. These results are important to understand RNA dynamic-function relationships and develop small molecules that target RNA dynamic ensembles. PMID:23441937

Rotational Spectrum of 1,1-Difluoroethane: Internal Rotation Analysis and Structure

NASA Astrophysics Data System (ADS)

Villamanan, R. M.; Chen, W. D.; Wlodarczak, G.; Demaison, J.; Lesarri, A. G.; Lopez, J. C.; Alonso, J. L.

1995-05-01

The rotational spectrum of CH3CHF2 in its ground state was measured up to 653 GHz. Accurate rotational and centrifugal distortion constants were determined. The internal rotation splittings were analyzed using the internal axis method. An ab initio structure has been calculated and a near-equilibrium structure has been estimated using offsets derived empirically. This structure was compared to an experimental r0 structure. The four lowest excited states (including the methyl torsion) have also been assigned.

New paradigms in internal architecture design and freeform fabrication of tissue engineering porous scaffolds.

PubMed

Yoo, Dongjin

2012-07-01

Advanced additive manufacture (AM) techniques are now being developed to fabricate scaffolds with controlled internal pore architectures in the field of tissue engineering. In general, these techniques use a hybrid method which combines computer-aided design (CAD) with computer-aided manufacturing (CAM) tools to design and fabricate complicated three-dimensional (3D) scaffold models. The mathematical descriptions of micro-architectures along with the macro-structures of the 3D scaffold models are limited by current CAD technologies as well as by the difficulty of transferring the designed digital models to standard formats for fabrication. To overcome these difficulties, we have developed an efficient internal pore architecture design system based on triply periodic minimal surface (TPMS) unit cell libraries and associated computational methods to assemble TPMS unit cells into an entire scaffold model. In addition, we have developed a process planning technique based on TPMS internal architecture pattern of unit cells to generate tool paths for freeform fabrication of tissue engineering porous scaffolds. Copyright © 2012 IPEM. Published by Elsevier Ltd. All rights reserved.

Tuning algorithms for fractional order internal model controllers for time delay processes

NASA Astrophysics Data System (ADS)

Muresan, Cristina I.; Dutta, Abhishek; Dulf, Eva H.; Pinar, Zehra; Maxim, Anca; Ionescu, Clara M.

2016-03-01

This paper presents two tuning algorithms for fractional-order internal model control (IMC) controllers for time delay processes. The two tuning algorithms are based on two specific closed-loop control configurations: the IMC control structure and the Smith predictor structure. In the latter, the equivalency between IMC and Smith predictor control structures is used to tune a fractional-order IMC controller as the primary controller of the Smith predictor structure. Fractional-order IMC controllers are designed in both cases in order to enhance the closed-loop performance and robustness of classical integer order IMC controllers. The tuning procedures are exemplified for both single-input-single-output as well as multivariable processes, described by first-order and second-order transfer functions with time delays. Different numerical examples are provided, including a general multivariable time delay process. Integer order IMC controllers are designed in each case, as well as fractional-order IMC controllers. The simulation results show that the proposed fractional-order IMC controller ensures an increased robustness to modelling uncertainties. Experimental results are also provided, for the design of a multivariable fractional-order IMC controller in a Smith predictor structure for a quadruple-tank system.

Organizational capacities for health promotion implementation: results from an international hospital study.

PubMed

Röthlin, Florian; Schmied, Hermann; Dietscher, Christina

2015-06-01

In this article, organizational structures in hospitals are discussed as possible capacities for hospital health promotion (HP) implementation, based on data from the PRICES-HPH study. PRICES-HPH is a cross-sectional evaluation study of the International Network of Health Promoting Hospitals & Health Services (HPH-Network) and was conducted in 2008-2012. Data from 159 acute care hospitals were used in the analysis. Twelve organizational structures, which were denoted as possible organizational health promotion capacities in previous literature, were tested for their association with certain strategic HP implementation approaches. Four organizational structures were significantly (p = 0.05) associated with one or more elaborate and comprehensive strategic HP implementation approaches: (1) a health promotion specific quality assessment routine; (2) an official hospital health promotion team; (3) a fulltime hospital health promotion coordinator; and (4) officially documented health promotion policies, strategies or standards. The results add further evidence to the importance of organizational capacity structures for hospital health promotion and identify four tangible structures as likely candidates for organizational HP capacities in hospitals. © The Author (2013). Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

External and internal structure of weevils (Insecta: Coleoptera) investigated with phase-contrast X-ray imaging

NASA Astrophysics Data System (ADS)

Hönnicke, M. G.; Cusatis, C.; Rigon, L.; Menk, R.-H.; Arfelli, F.; Foerster, L. A.; Rosado-Neto, G. H.

2010-08-01

Weevils (Coleoptera: Curculionidae) are identified by the external structure (dorsal, ventral and lateral features) and also by internal structure. The genitalia can be used to distinguish the sex and to identify the insects when the external structure appears identical. For this purpose, a destructive dissecting microscopy procedure is usually employed. In this paper, phase contrast X-ray imaging (radiography and tomography) is employed to investigate the internal structure (genitalia) of two entire species of weevils that presents very similar external structures ( Sitophilus oryzae and Sitophilus zeamais). The detection of features, which looks like the genital structure, shows that such non-destructive technique could be used as an alternative method for identification of insects. This method is especially useful in examining the internal features of precious species from museum collections, as already described in the recent literature.

Locating the optimal internal jugular target site for central venous line placement.

PubMed

Giordano, Chris R; Murtagh, Kevin R; Mills, Jaime; Deitte, Lori A; Rice, Mark J; Tighe, Patrick J

2016-09-01

Historically, the placement of internal jugular central venous lines has been accomplished by using external landmarks to help identify target-rich locations in order to steer clear of dangerous structures. This paradigm is largely being displaced, as ultrasound has become routine practice, raising new considerations regarding target locations and risk mitigation. Most human anatomy texts depict the internal jugular vein as a straight columnar structure that exits the cranial vault the same size that it enters the thoracic cavity. We dispute the notion that the internal jugulars are cylindrical columns that symmetrically descend into the thoracic cavity, and purport that they are asymmetric conical structures. The primary aim of this study was to evaluate 100 consecutive adult chest and neck computed tomography exams that were imaged at an inpatient hospital. We measured the internal jugular on the left and right sides at three different levels to look for differences in size as the internal jugular descends into the thoracic cavity. We revealed that as the internal jugular descends into the thorax, the area of the vessel increases and geometrically resembles a conical structure. We also reconfirmed that the left internal jugular is smaller than the right internal jugular. Understanding that the largest target area for central venous line placement is the lower portion of the right internal jugular vein will help to better target vascular access for central line placement. This is the first study the authors are aware of that depicts the internal jugular as a conical structure as opposed to the commonly depicted symmetrical columnar structure frequently illustrated in anatomy textbooks. This target area does come with additional risk, as the closer you get to the thoracic cavity, the greater the chances for lung injury. Copyright © 2016 Elsevier Inc. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

The Autonomic Intelligent Cyber Sensor (AICS) provides cyber security and industrial network state awareness for Ethernet based control network implementations. The AICS utilizes collaborative mechanisms based on Autonomic Research and a Service Oriented Architecture (SOA) to: 1) identify anomalous network traffic; 2) discover network entity information; 3) deploy deceptive virtual hosts; and 4) implement self-configuring modules. AICS achieves these goals by dynamically reacting to the industrial human-digital ecosystem in which it resides. Information is transported internally and externally on a standards based, flexible two-level communication structure.

Damage Tolerance Testing of a NASA TransHab Derivative Woven Inflatable Module

NASA Technical Reports Server (NTRS)

Edgecombe, John; delaFuente, Horacio; Valle, Gerard

2009-01-01

Current options for Lunar habitat architecture include inflatable habitats and airlocks. Inflatable structures can have mass and volume advantages over conventional structures. However, inflatable structures carry different inherent risks and are at a lower Technical Readiness Level (TRL) than more conventional metallic structures. One of the risks associated with inflatable structures is in understanding the tolerance to induced damage. The Damage Tolerance Test (DTT) is designed to study the structural integrity of an expandable structure. TransHab (Figure 1) was an experimental inflatable module developed at the NASA/Johnson Space Center in the 1990 s. The TransHab design was originally envisioned for use in Mars Transits but was also studied as a potential habitat for the International Space Station (ISS). The design of the TransHab module was based on a woven design using an Aramid fabric. Testing of this design demonstrated a high level of predictability and repeatability with analytical predictions of stresses and deflections. Based on JSC s experience with the design and analysis of woven inflatable structures, the Damage Tolerance Test article was designed and fabricated using a woven design. The DTT article was inflated to 45 psig, representing 25% of the ultimate burst pressure, and one of the one-inch wide longitudinal structural members was severed by initiating a Linear Shaped Charge (LSC). Strain gage measurements, at the interface between the expandable elements (straps) and the nonexpandable metallic elements for pre-selected longitudinal straps, were taken throughout pressurization of the module and strap separation. Strain gage measurements show no change in longitudinal strap loading at the bulkhead interface after strap separation indicating loads in the restraint layer were re-distributed local to the damaged area due to the effects of friction under high internal pressure loading. The test completed all primary objectives with better than expected results. This paper will discuss space inflatable structures, damage tolerance analysis, test results, and applicability to the Lunar architecture.

Structural Measures to Track the Evolution of SNOMED CT Hierarchies

PubMed Central

Wei, Duo; Gu, Huanying (Helen); Perl, Yehoshua; Halper, Michael; Ochs, Christopher; Elhanan, Gai; Chen, Yan

2015-01-01

The Systematized Nomenclature of Medicine Clinical Terms (SNOMED CT) is an extensive reference terminology with an attendant amount of complexity. It has been updated continuously and revisions have been released semi-annually to meet users’ needs and to reflect the results of quality assurance (QA) activities. Two measures based on structural features are proposed to track the effects of both natural terminology growth and QA activities based on aspects of the complexity of SNOMED CT. These two measures, called the structural density measure and accumulated structural measure, are derived based on two abstraction networks, the area taxonomy and the partial-area taxonomy. The measures derive from attribute relationship distributions and various concept groupings that are associated with the abstraction networks. They are used to track the trends in the complexity of structures as SNOMED CT changes over time. The measures were calculated for consecutive releases of five SNOMED CT hierarchies, including the Specimen hierarchy. The structural density measure shows that natural growth tends to move a hierarchy’s structure toward a more complex state, whereas the accumulated structural measure shows that QA processes tend to move a hierarchy’s structure toward a less complex state. It is also observed that both the structural density and accumulated structural measures are useful tools to track the evolution of an entire SNOMED CT hierarchy and reveal internal concept migration within it. PMID:26260003

Infrared Fibers for Use in Space-Based Smart Structures

NASA Technical Reports Server (NTRS)

Tucker, Dennis S.; Nettles, Alan T.; Brantley, Lott W. (Technical Monitor)

2001-01-01

Infrared optical fibers are finding a number of applications including laser surgery, remote sensing, and nuclear radiation resistant links. Utilizing these fibers in space-based structures is another application, which can be exploited. Acoustic and thermal sensing are two areas in which these fibers could be utilized. In particular, fibers could be embedded in IM7/8552 toughened epoxy and incorporated into space structures both external and internal. ZBLAN optical fibers are a candidate, which have been studied extensively over the past 20 years for terrestrial applications. For the past seven years the effects of gravity on the crystallization behavior of ZBLAN optical fiber has been studied. It has been found that ZBLAN crystallization is suppressed in microgravity. This lack of crystallization leads to a fiber with better transmission characteristics than its terrestrial counterpart.

Protein Data Bank depositions from synchrotron sources.

PubMed

Jiang, Jiansheng; Sweet, Robert M

2004-07-01

A survey and analysis of Protein Data Bank (PDB) depositions from international synchrotron radiation facilities, based on the latest released PDB entries, are reported. The results (http://asdp.bnl.gov/asda/Libraries/) show that worldwide, every year since 1999, more than 50% of the deposited X-ray structures have used synchrotron facilities, reaching 75% by 2003. In this web-based database, all PDB entries among individual synchrotron beamlines are archived, synchronized with the weekly PDB release. Statistics regarding the quality of experimental data and the refined model for all structures are presented, and these are analysed to reflect the impact of synchrotron sources. The results confirm the common impression that synchrotron sources extend the size of structures that can be solved with equivalent or better quality than home sources.

Moon Exploration from "apollo" Magnetic and Gravity Field Data

NASA Astrophysics Data System (ADS)

Kharitonov, Andrey

Recently, the great value is given to various researches of the Moon, as nearest nature satellite of the Earth, because there is preparation for forthcoming starts on the Moon of the American, European, Russian, Chinese, Indian new Orbiters and Landers. Designing of International Lu-nar bases is planned also. Therefore, in the near future the series of the questions connected with placing of International Lunar bases which coordinates substantially should to be connected with heterogeneity of the internal structure of the Moon can become especially interesting. If in the Moon it will be possible to find large congestions of water ice and those chemical elements which stocks in the Earth are limited this area of the Moon can become perspective for Inter-national Lunar bases. To solve a question of research of the deep structure of the Moon in the locations of International Lunar bases, competently, without excessive expenses for start new various under the form of the Lunar orbit of automatic space vehicles (polar, equatorial, inclined to the rotation axis) and their altitude of flight, which also not always were connected with investigation programs of measured fields (video observation, radio-frequency sounding, mag-netic, gravity), is possible if already from the available information of space vehicles APOLLO, SMART1, KAGUYA, LCROSS, LRO, CHANDRAYAAN-1, CHANG'E-1 it will be possible to analyse simultaneously some various fields, at different altitudes of measuring over the surface (20-300 km) of the Moon. The experimental data of the radial component magnetic field and gravity field the Moon measured at different altitudes, in its equatorial part have been analysed for the research of the deep structure of the Moon. This data has been received as a result of start of space vehicles -APOLLO-15 and APOLLO-16 (USA), and also the Russian space vehicles "LUNOHOD". Authors had been used the data of a magnetic field of the Moon at flight altitude 160, 100, 75, 30, 0 km. All orbits of APOLLO-15 space vehicle at flight altitude from 160 to 75 km have been executed near to Moon equator, in the latitude direction round the Moon, in a strip in width about 250 km, in the range from 15 degrees of the northern latitude to 15 degrees of the southern latitude. For calculations of deep parameters according to the Moon magnetic field as much as possible high flight altitude (h=160 km), average flight altitude (h=100 km), the minimum flight altitude (h=75 km) APOLLO-15 space vehicle have been used. The data about the Moon magnetic field at 30 km flight altitude has been pre-sented by one pass APOLLO-16. The depths of several magnetic and density borders into the Moon which allow to make some assumptions of possible structure of rocks of the Moon were defined. The activity is executed at support of Russian Foundation of Basic Researh, grant 10-05-00343-a.

On the topological structure of multinationals network

NASA Astrophysics Data System (ADS)

Joyez, Charlie

2017-05-01

This paper uses a weighted network analysis to examine the structure of multinationals' implantation countries network. Based on French firm-level dataset of multinational enterprises (MNEs) the network analysis provides information on each country position in the network and in internationalization strategies of French MNEs through connectivity preferences among the nodes. The paper also details network-wide features and their recent evolution toward a more decentralized structure. While much has been said on international trade network, this paper shows that multinational firms' studies would also benefit from network analysis, notably by investigating the sensitivity of the network construction to firm heterogeneity.

Integral finite element analysis of turntable bearing with flexible rings

NASA Astrophysics Data System (ADS)

Deng, Biao; Liu, Yunfei; Guo, Yuan; Tang, Shengjin; Su, Wenbin; Lei, Zhufeng; Wang, Pengcheng

2018-03-01

This paper suggests a method to calculate the internal load distribution and contact stress of the thrust angular contact ball turntable bearing by FEA. The influence of the stiffness of the bearing structure and the plastic deformation of contact area on the internal load distribution and contact stress of the bearing is considered. In this method, the load-deformation relationship of the rolling elements is determined by the finite element contact analysis of a single rolling element and the raceway. Based on this, the nonlinear contact between the rolling elements and the inner and outer ring raceways is same as a nonlinear compression spring and bearing integral finite element analysis model including support structure was established. The effects of structural deformation and plastic deformation on the built-in stress distribution of slewing bearing are investigated on basis of comparing the consequences of load distribution, inner and outer ring stress, contact stress and other finite element analysis results with the traditional bearing theory, which has guiding function for improving the design of slewing bearing.

The application research of microwave nondestructive testing and imaging based on ω-k algorithm

NASA Astrophysics Data System (ADS)

Qi, Shengxiang; Ren, Jian; Gu, Lihua; Xu, Hui; Wang, Yuanbo

2017-07-01

The Bridges had collapsed accidents in recent years due to bridges quality problems. Therefore, concretes nondestructive testing are particularly important. At present, most applications are Ground Penetrating Radar (GPR) technology in the detection of reinforced concretes structure. GPR are used the pulse method which alongside with definitive advantages, but the testing of the internal structure of the small thickness concretes has very low resolution by this method. In this paper, it's the first time to use the ultra-wideband (UWB) stepped frequency conversion radar above problems. We use vector network analyzer and double ridged horn antenna microwave imaging system to test the reinforced concretes block. The internal structure of the concretes is reconstructed with a method of synthetic aperture of ω-k algorithm. By this method, the depth of the steel bar with the diameter of 1cm is shown exactly in the depth of 450mm×400mm×500mm and the depth error do not exceed 1cm.

Rational design of reconfigurable prismatic architected materials.

PubMed

Overvelde, Johannes T B; Weaver, James C; Hoberman, Chuck; Bertoldi, Katia

2017-01-18

Advances in fabrication technologies are enabling the production of architected materials with unprecedented properties. Most such materials are characterized by a fixed geometry, but in the design of some materials it is possible to incorporate internal mechanisms capable of reconfiguring their spatial architecture, and in this way to enable tunable functionality. Inspired by the structural diversity and foldability of the prismatic geometries that can be constructed using the snapology origami technique, here we introduce a robust design strategy based on space-filling tessellations of polyhedra to create three-dimensional reconfigurable materials comprising a periodic assembly of rigid plates and elastic hinges. Guided by numerical analysis and physical prototypes, we systematically explore the mobility of the designed structures and identify a wide range of qualitatively different deformations and internal rearrangements. Given that the underlying principles are scale-independent, our strategy can be applied to the design of the next generation of reconfigurable structures and materials, ranging from metre-scale transformable architectures to nanometre-scale tunable photonic systems.

Rational design of reconfigurable prismatic architected materials

NASA Astrophysics Data System (ADS)

Overvelde, Johannes T. B.; Weaver, James C.; Hoberman, Chuck; Bertoldi, Katia

2017-01-01

Advances in fabrication technologies are enabling the production of architected materials with unprecedented properties. Most such materials are characterized by a fixed geometry, but in the design of some materials it is possible to incorporate internal mechanisms capable of reconfiguring their spatial architecture, and in this way to enable tunable functionality. Inspired by the structural diversity and foldability of the prismatic geometries that can be constructed using the snapology origami technique, here we introduce a robust design strategy based on space-filling tessellations of polyhedra to create three-dimensional reconfigurable materials comprising a periodic assembly of rigid plates and elastic hinges. Guided by numerical analysis and physical prototypes, we systematically explore the mobility of the designed structures and identify a wide range of qualitatively different deformations and internal rearrangements. Given that the underlying principles are scale-independent, our strategy can be applied to the design of the next generation of reconfigurable structures and materials, ranging from metre-scale transformable architectures to nanometre-scale tunable photonic systems.

Structure and function of a compound eye, more than half a billion years old.

PubMed

Schoenemann, Brigitte; Pärnaste, Helje; Clarkson, Euan N K

2017-12-19

Until now, the fossil record has not been capable of revealing any details of the mechanisms of complex vision at the beginning of metazoan evolution. Here, we describe functional units, at a cellular level, of a compound eye from the base of the Cambrian, more than half a billion years old. Remains of early Cambrian arthropods showed the external lattices of enormous compound eyes, but not the internal structures or anything about how those compound eyes may have functioned. In a phosphatized trilobite eye from the lower Cambrian of the Baltic, we found lithified remnants of cellular systems, typical of a modern focal apposition eye, similar to those of a bee or dragonfly. This shows that sophisticated eyes already existed at the beginning of the fossil record of higher organisms, while the differences between the ancient system and the internal structures of a modern apposition compound eye open important insights into the evolution of vision. Copyright © 2017 the Author(s). Published by PNAS.

Data Set for Pathology Reporting of Cutaneous Invasive Melanoma

PubMed Central

Judge, Meagan J.; Evans, Alan; Frishberg, David P.; Prieto, Victor G.; Thompson, John F.; Trotter, Martin J.; Walsh, Maureen Y.; Walsh, Noreen M.G.; Ellis, David W.

2013-01-01

An accurate and complete pathology report is critical for the optimal management of cutaneous melanoma patients. Protocols for the pathologic reporting of melanoma have been independently developed by the Royal College of Pathologists of Australasia (RCPA), Royal College of Pathologists (United Kingdom) (RCPath), and College of American Pathologists (CAP). In this study, data sets, checklists, and structured reporting protocols for pathologic examination and reporting of cutaneous melanoma were analyzed by an international panel of melanoma pathologists and clinicians with the aim of developing a common, internationally agreed upon, evidence-based data set. The International Collaboration on Cancer Reporting cutaneous melanoma expert review panel analyzed the existing RCPA, RCPath, and CAP data sets to develop a protocol containing “required” (mandatory/core) and “recommended” (nonmandatory/noncore) elements. Required elements were defined as those that had agreed evidentiary support at National Health and Medical Research Council level III-2 level of evidence or above and that were unanimously agreed upon by the review panel to be essential for the clinical management, staging, or assessment of the prognosis of melanoma or fundamental for pathologic diagnosis. Recommended elements were those considered to be clinically important and recommended for good practice but with lesser degrees of supportive evidence. Sixteen core/required data elements for cutaneous melanoma pathology reports were defined (with an additional 4 core/required elements for specimens received with lymph nodes). Eighteen additional data elements with a lesser level of evidentiary support were included in the recommended data set. Consensus response values (permitted responses) were formulated for each data item. Development and agreement of this evidence-based protocol at an international level was accomplished in a timely and efficient manner, and the processes described herein may facilitate the development of protocols for other tumor types. Widespread utilization of an internationally agreed upon, structured pathology data set for melanoma will lead not only to improved patient management but is a prerequisite for research and for international benchmarking in health care. PMID:24061524

Transition to surgical residency: a multi-institutional study of perceived intern preparedness and the effect of a formal residency preparatory course in the fourth year of medical school.

PubMed

Minter, Rebecca M; Amos, Keith D; Bentz, Michael L; Blair, Patrice Gabler; Brandt, Christopher; D'Cunha, Jonathan; Davis, Elisabeth; Delman, Keith A; Deutsch, Ellen S; Divino, Celia; Kingsley, Darra; Klingensmith, Mary; Meterissian, Sarkis; Sachdeva, Ajit K; Terhune, Kyla; Termuhlen, Paula M; Mullan, Patricia B

2015-08-01

To evaluate interns' perceived preparedness for defined surgical residency responsibilities and to determine whether fourth-year medical school (M4) preparatory courses ("bootcamps") facilitate transition to internship. The authors conducted a multi-institutional, mixed-methods study (June 2009) evaluating interns from 11 U.S. and Canadian surgery residency programs. Interns completed structured surveys and answered open-ended reflective questions about their preparedness for their surgery internship. Analyses include t tests comparing ratings of interns who had and had not participated in formal internship preparation programs. The authors calculated Cohen d for effect size and used grounded theory to identify themes in the interns' reflections. Of 221 eligible interns, 158 (71.5%) participated. Interns self-reported only moderate preparation for most defined care responsibilities in the medical knowledge and patient care domains but, overall, felt well prepared in the professionalism, interpersonal communication, practice-based learning, and systems-based practice domains. Interns who participated in M4 preparatory curricula had higher self-assessed ratings of surgical technical skills, professionalism, interpersonal communication skills, and overall preparation, at statistically significant levels (P < .05) with medium effect sizes. Themes identified in interns' characterizations of their greatest internship challenges included anxiety or lack of preparation related to performance of technical skills or procedures, managing simultaneous demands, being first responders for critically ill patients, clinical management of predictable postoperative conditions, and difficult communications. Entering surgical residency, interns report not feeling prepared to fulfill common clinical and professional responsibilities. As M4 curricula may enhance preparation, programs facilitating transition to residency should be developed and evaluated.

Structure- and ligand-based structure-activity relationships for a series of inhibitors of aldolase.

PubMed

Ferreira, Leonardo G; Andricopulo, Adriano D

2012-12-01

Aldolase has emerged as a promising molecular target for the treatment of human African trypanosomiasis. Over the last years, due to the increasing number of patients infected with Trypanosoma brucei, there is an urgent need for new drugs to treat this neglected disease. In the present study, two-dimensional fragment-based quantitative-structure activity relationship (QSAR) models were generated for a series of inhibitors of aldolase. Through the application of leave-one-out and leave-many-out cross-validation procedures, significant correlation coefficients were obtained (r²=0.98 and q²=0.77) as an indication of the statistical internal and external consistency of the models. The best model was employed to predict pKi values for a series of test set compounds, and the predicted values were in good agreement with the experimental results, showing the power of the model for untested compounds. Moreover, structure-based molecular modeling studies were performed to investigate the binding mode of the inhibitors in the active site of the parasitic target enzyme. The structural and QSAR results provided useful molecular information for the design of new aldolase inhibitors within this structural class.

Going global in physical therapist education: International Service-Learning in US-based programmes.

PubMed

Pechak, Celia; Thompson, Mary

2011-12-01

 Internationalization is expanding its presence in higher education in the United States. Reflecting this trend that includes incorporating global perspectives in the curricula, physical therapist education programmes increasingly offer international opportunities such as International Service-Learning (ISL) to their students. Service-learning, a teaching strategy that integrates community service with structured learning activities, has gained broad acceptance in health professions education including physical therapy, and is therefore the focus of this paper. The specific purposes of this paper were to identify and analyse the commonalities that existed among established ISL programmes within physical therapist education programmes in terms of structures and processes, and to consider its broader implications for physical therapist education.   A descriptive, exploratory study was performed using grounded theory. Snowball and purposive, theoretical sampling yielded 14 faculty members with experience in international service, international learning or ISL in physical therapist education programmes. Faculty were interviewed by phone. Interview transcriptions and course documents were analysed applying grounded theory methodology. Data from eight programmes which met the operational definition of established ISL were used to address the purposes of this paper.   Five phases of establishing an ISL programme were identified: development, design, implementation, evaluation, and enhancement. Although no single model exists for ISL in physical therapist education; commonalities in structures and processes were identified in each phase. However, attention to service objectives and outcomes is lacking.   While analysis revealed that each programme shared commonalities and demonstrated differences in structures and processes compared with the other programmes, the study demonstrated a general lack of focus on formal community outcomes which raises ethical concerns. Future research and dialogue is warranted to explore ethics and good practice in ISL and other global health initiatives in physical therapy. This study may facilitate reflections and creative solutions by individual faculty and the profession. Copyright © 2010 John Wiley & Sons, Ltd.

Internal Tooth Structure and Burial Practices: Insights into the Neolithic Necropolis of Gurgy (France, 5100-4000 cal. BC).

PubMed

Le Luyer, Mona; Coquerelle, Michael; Rottier, Stéphane; Bayle, Priscilla

2016-01-01

Variations in the dental crown form are widely studied to interpret evolutionary changes in primates as well as to assess affinities among human archeological populations. Compared to external metrics of dental crown size and shape, variables including the internal structures such as enamel thickness, tissue proportions, and the three-dimensional shape of enamel-dentin junction (EDJ), have been described as powerful measurements to study taxonomy, phylogenetic relationships, dietary, and/or developmental patterns. In addition to providing good estimate of phenotypic distances within/across archeological samples, these internal tooth variables may help to understand phylogenetic, functional, and developmental underlying causes of variation. In this study, a high resolution microtomographic-based record of upper permanent second molars from 20 Neolithic individuals of the necropolis of Gurgy (France) was applied to evaluate the intrasite phenotypic variation in crown tissue proportions, thickness and distribution of enamel, and EDJ shape. The study aims to compare interindividual dental variations with burial practices and chronocultural parameters, and suggest underlying causes of these dental variations. From the non-invasive characterization of internal tooth structure, differences have been found between individuals buried in pits with alcove and those buried in pits with container and pits with wattling. Additionally, individuals from early and recent phases of the necropolis have been distinguished from those of the principal phase from their crown tissue proportions and EDJ shape. The results suggest that the internal tooth structure may be a reliable proxy to track groups sharing similar chronocultural and burial practices. In particular, from the EDJ shape analysis, individuals buried in an alcove shared a reduction of the distolingual dentin horn tip (corresponding to the hypocone). Environmental, developmental and/or functional underlying causes might be suggested for the origin of phenotypic differences shared by these individuals buried in alcoves.

A new species and new records of Pseudocephennium Reitter in Venezuela, with notes on movable endophallic structures (Coleoptera: Staphylinidae: Scydmaeninae).

PubMed

Jałoszyński, Paweł

2016-03-11

Pseudocephennium auriculatum sp. n. is described, based on a male specimen collected in north-western Venezuela. New findings of Pseudocephennium maximum Jałoszyński and P. araguanum Jałoszyński, so far known only from holotypes, are reported. The aedeagi of newly found specimens have the endophallic structures extruded to various extent which makes it possible to identify movable components of the internal aedeagal armature.

NASA Applications of Structural Health Monitoring Technology

NASA Technical Reports Server (NTRS)

Richards, W Lance; Madaras, Eric I.; Prosser, William H.; Studor, George

2013-01-01

This presentation provides examples of research and development that has recently or is currently being conducted at NASA, with a special emphasis on the application of structural health monitoring (SHM) of aerospace vehicles. SHM applications on several vehicle programs are highlighted, including Space Shuttle Orbiter, International Space Station, Uninhabited Aerial Vehicles, and Expandable Launch Vehicles. Examples of current and previous work are presented in the following categories: acoustic emission impact detection, multi-parameter fiber optic strain-based sensing, wireless sensor system development, and distributed leak detection.

NASA Applications of Structural Health Monitoring Technology

NASA Technical Reports Server (NTRS)

Richards, W Lance; Madaras, Eric I.; Prosser, William H.; Studor, George

2013-01-01

This presentation provides examples of research and development that has recently or is currently being conducted at NASA, with a special emphasis on the application of structural health monitoring (SHM) of aerospace vehicles. SHM applications on several vehicle programs are highlighted, including Space Shuttle Orbiter, the International Space Station, Uninhabited Aerial Vehicles, and Expendable Launch Vehicles. Examples of current and previous work are presented in the following categories: acoustic emission impact detection, multi-parameter fiber optic strain-based sensing, wireless sensor system development, and distributed leak detection.

Why Aren't More Primary Care Residents Going into Primary Care? A Qualitative Study.

PubMed

Long, Theodore; Chaiyachati, Krisda; Bosu, Olatunde; Sircar, Sohini; Richards, Bradley; Garg, Megha; McGarry, Kelly; Solomon, Sonja; Berman, Rebecca; Curry, Leslie; Moriarty, John; Huot, Stephen

2016-12-01

Workforce projections indicate a potential shortage of up to 31,000 adult primary care providers by the year 2025. Approximately 80 % of internal medicine residents and nearly two-thirds of primary care internal medicine residents do not plan to have a career in primary care or general internal medicine. We aimed to explore contextual and programmatic factors within primary care residency training environments that may influence career choices. This was a qualitative study based on semi-structured, in-person interviews. Three primary care internal medicine residency programs were purposefully selected to represent a diversity of training environments. Second and third year residents were interviewed. We used a survey guide developed from pilot interviews and existing literature. Three members of the research team independently coded the transcripts and developed the code structure based on the constant comparative method. The research team identified emerging themes and refined codes. ATLAS.ti was used for the analysis. We completed 24 interviews (12 second-year residents, and 12 third-year residents). The age range was 27-39 years. Four recurrent themes characterized contextual and programmatic factors contributing to residents' decision-making: resident expectations of a career in primary care, navigation of the boundary between social needs and medical needs, mentorship and perceptions of primary care, and structural features of the training program. Addressing aspects of training that may discourage residents from careers in primary care such as lack of diversity in outpatient experiences and resident frustration with their inability to address social needs of patients, and strengthening aspects of training that may encourage interests in careers in primary care such as mentorship and protected time away from inpatient responsibilities during primary care rotations, may increase the proportion of residents enrolled in primary care training programs who pursue a career in primary care.

Evaluation of non-rigid registration parameters for atlas-based segmentation of CT images of human cochlea

NASA Astrophysics Data System (ADS)

Elfarnawany, Mai; Alam, S. Riyahi; Agrawal, Sumit K.; Ladak, Hanif M.

2017-02-01

Cochlear implant surgery is a hearing restoration procedure for patients with profound hearing loss. In this surgery, an electrode is inserted into the cochlea to stimulate the auditory nerve and restore the patient's hearing. Clinical computed tomography (CT) images are used for planning and evaluation of electrode placement, but their low resolution limits the visualization of internal cochlear structures. Therefore, high resolution micro-CT images are used to develop atlas-based segmentation methods to extract these nonvisible anatomical features in clinical CT images. Accurate registration of the high and low resolution CT images is a prerequisite for reliable atlas-based segmentation. In this study, we evaluate and compare different non-rigid B-spline registration parameters using micro-CT and clinical CT images of five cadaveric human cochleae. The varying registration parameters are cost function (normalized correlation (NC), mutual information and mean square error), interpolation method (linear, windowed-sinc and B-spline) and sampling percentage (1%, 10% and 100%). We compare the registration results visually and quantitatively using the Dice similarity coefficient (DSC), Hausdorff distance (HD) and absolute percentage error in cochlear volume. Using MI or MSE cost functions and linear or windowed-sinc interpolation resulted in visually undesirable deformation of internal cochlear structures. Quantitatively, the transforms using 100% sampling percentage yielded the highest DSC and smallest HD (0.828+/-0.021 and 0.25+/-0.09mm respectively). Therefore, B-spline registration with cost function: NC, interpolation: B-spline and sampling percentage: moments 100% can be the foundation of developing an optimized atlas-based segmentation algorithm of intracochlear structures in clinical CT images.

Three-dimensional scaffolding to investigate neuronal derivatives of human embryonic stem cells.

PubMed

Soman, Pranav; Tobe, Brian T D; Lee, Jin Woo; Winquist, Alicia M; Singec, Ilyas; Vecchio, Kenneth S; Snyder, Evan Y; Chen, Shaochen

2012-10-01

Access to unlimited numbers of live human neurons derived from stem cells offers unique opportunities for in vitro modeling of neural development, disease-related cellular phenotypes, and drug testing and discovery. However, to develop informative cellular in vitro assays, it is important to consider the relevant in vivo environment of neural tissues. Biomimetic 3D scaffolds are tools to culture human neurons under defined mechanical and physico-chemical properties providing an interconnected porous structure that may potentially enable a higher or more complex organization than traditional two-dimensional monolayer conditions. It is known that even minor variations in the internal geometry and mechanical properties of 3D scaffolds can impact cell behavior including survival, growth, and cell fate choice. In this report, we describe the design and engineering of 3D synthetic polyethylene glycol (PEG)-based and biodegradable gelatin-based scaffolds generated by a free form fabrication technique with precise internal geometry and elastic stiffnesses. We show that human neurons, derived from human embryonic stem (hESC) cells, are able to adhere to these scaffolds and form organoid structures that extend in three dimensions as demonstrated by confocal and electron microscopy. Future refinements of scaffold structure, size and surface chemistries may facilitate long term experiments and designing clinically applicable bioassays.

Alterations in White Matter Integrity in Young Adults with Smartphone Dependence

PubMed Central

Hu, Yuanming; Long, Xiaojing; Lyu, Hanqing; Zhou, Yangyang; Chen, Jianxiang

2017-01-01

Smartphone dependence (SPD) is increasingly regarded as a psychological problem, however, the underlying neural substrates of SPD is still not clear. High resolution magnetic resonance imaging provides a useful tool to help understand and manage the disorder. In this study, a tract-based spatial statistics (TBSS) analysis on diffusion tensor imaging (DTI) was used to measure white matter integrity in young adults with SPD. A total of 49 subjects were recruited and categorized into SPD and control group based on their clinical behavioral tests. To localize regions with abnormal white matter integrity in SPD, the voxel-wise analysis of fractional anisotropy (FA) and mean diffusivity (MD) on the whole brain was performed by TBSS. The correlation between the quantitative variables of brain structures and the behavior measures were performed. Our result demonstrated that SPD had significantly lower white matter integrity than controls in superior longitudinal fasciculus (SLF), superior corona radiata (SCR), internal capsule, external capsule, sagittal stratum, fornix/stria terminalis and midbrain structures. Correlation analysis showed that the observed abnormalities in internal capsule and stria terminalis were correlated with the severity of dependence and behavioral assessments. Our finding facilitated a primary understanding of white matter characteristics in SPD and indicated that the structural deficits might link to behavioral impairments. PMID:29163108

NGO Partnerships in Using Ecotourism for Conservation: Systematic Review and Meta-Analysis.

PubMed

Romero-Brito, Tania P; Buckley, Ralf C; Byrne, Jason

2016-01-01

We analyse 214 cases worldwide where non-governmental organisations (NGOs) use ecotourism for conservation. Other stakeholders in these initiatives include local communities, the private sector, and government agencies. Stakeholder relationships determine NGO roles and project management structures and governance. We classified cases into 10 structural categories based on the initiating stakeholder and the NGO role, and used these categories to analyze geographic patterns and success factors. Most of the 214 cases are community-based (~170; 79%); most are in developing countries (190; 89%); and most are in protected areas (196; 91%). Frequencies of structural categories differ between continents. More cases in Latin America and Asia are initiated by NGOs and local communities, and more in Africa by the private sector. Case-study authors used a range of economic, socio-cultural and environmental criteria to judge whether projects were successful. At global scale, we found no significant association between project success and the involvement of private tourism entrepreneurs. Projects involving either local or international NGOs had higher success rates than those that involved both simultaneously. Future research could adopt political ecology approaches to examine: the factors that lead NGOs to adopt ecotourism enterprises; their internal decision-making processes and strategies; their interactions with the stakeholders involved; and their conservation goals and outcomes.

NGO Partnerships in Using Ecotourism for Conservation: Systematic Review and Meta-Analysis

PubMed Central

Romero-Brito, Tania P.; Byrne, Jason

2016-01-01

We analyse 214 cases worldwide where non-governmental organisations (NGOs) use ecotourism for conservation. Other stakeholders in these initiatives include local communities, the private sector, and government agencies. Stakeholder relationships determine NGO roles and project management structures and governance. We classified cases into 10 structural categories based on the initiating stakeholder and the NGO role, and used these categories to analyze geographic patterns and success factors. Most of the 214 cases are community-based (~170; 79%); most are in developing countries (190; 89%); and most are in protected areas (196; 91%). Frequencies of structural categories differ between continents. More cases in Latin America and Asia are initiated by NGOs and local communities, and more in Africa by the private sector. Case-study authors used a range of economic, socio-cultural and environmental criteria to judge whether projects were successful. At global scale, we found no significant association between project success and the involvement of private tourism entrepreneurs. Projects involving either local or international NGOs had higher success rates than those that involved both simultaneously. Future research could adopt political ecology approaches to examine: the factors that lead NGOs to adopt ecotourism enterprises; their internal decision-making processes and strategies; their interactions with the stakeholders involved; and their conservation goals and outcomes. PMID:27893800

Testing and Analysis of a Composite Non-Cylindrical Aircraft Fuselage Structure. Part 1; Ultimate Design Loads

NASA Technical Reports Server (NTRS)

Przekop, Adam; Jegley, Dawn C.; Lovejoy, Andrew E.; Rouse, Marshall; Wu, Hsi-Yung T.

2016-01-01

The Environmentally Responsible Aviation Project aimed to develop aircraft technologies enabling significant fuel burn and community noise reductions. Small incremental changes to the conventional metallic alloy-based 'tube and wing' configuration were not sufficient to achieve the desired metrics. One airframe concept identified by the project as having the potential to dramatically improve aircraft performance was a composite-based hybrid wing body configuration. Such a concept, however, presented inherent challenges stemming from, among other factors, the necessity to transfer wing loads through the entire center fuselage section which accommodates a pressurized cabin confined by flat or nearly flat panels. This paper discusses finite element analysis and testing of a large-scale hybrid wing body center section structure developed and constructed to demonstrate that the Pultruded Rod Stitched Efficient Unitized Structure concept can meet these challenging demands of the next generation airframes. Part I of the paper considers the five most critical load conditions, which are internal pressure only and positive and negative g-loads with and without internal pressure. Analysis results are compared with measurements acquired during testing. Performance of the test article is found to be closely aligned with predictions and, consequently, able to support the hybrid wing body design loads in pristine and barely visible impact damage conditions.

Effects of virtual reality for stroke individuals based on the International Classification of Functioning and Health: a systematic review.

PubMed

Palma, Gisele Carla Dos Santos; Freitas, Tatiana Beline; Bonuzzi, Giordano Márcio Gatinho; Soares, Marcos Antonio Arlindo; Leite, Paulo Henrique Wong; Mazzini, Natália Araújo; Almeida, Murilo Ruas Groschitz; Pompeu, José Eduardo; Torriani-Pasin, Camila

2017-05-01

This review determines the effects of virtual reality interventions for stroke subjects based on the International Classification of Functioning, Disability,and Health (ICF) framework. Virtual reality is a promising tool for therapy for stroke rehabilitation, but the effects of virtual reality interventions on post-stroke patients based on the specific ICF domains (Body Structures, Body Functions, Activity, and Participation) have not been investigated. A systematic review was conducted, including trials with adults with a clinical diagnosis of a chronic, subacute, or acute stroke. Eligible trials had to include studies with an intervention protocol and follow-up, with a focus on upper limbs and/or lower limbs and/or balance. The Physiotherapy Evidence Database (PEDro) was used to assess the methodological quality of randomized controlled trials. Each trial was separated according to methodological quality into a high-quality trial (PEDro ≥ 6) and a low-quality trial (PEDro ≤ 6). Only high-quality trials were analyzed specifically based on the outcome of these trials. In total, 54 trials involving 1811 participants were included. Of the papers included and considered high quality, 14 trials evaluated areas of the Body Structures component, 20 trials of the Body Functions domain, 17 trials of the Activity component, and 8 trials of the Participation domain. In relation to ICF Part 2, four trials evaluated areas of the Personal Factors component and one trial evaluated domains of the Environmental Factors component. The effects of virtual reality on stroke rehabilitation based on the ICF framework are positive in Body Function and Body Structure. However, the results in the domains Activity and Participation are inconclusive. More high-quality clinical trials are needed to confirm the effectiveness of virtual reality in the domains of Activity and Participation.

Near-surface energy transfers from internal tide beams to smaller vertical scale motions

NASA Astrophysics Data System (ADS)

Chou, S.; Staquet, C.; Carter, G. S.; Luther, D. S.

2016-02-01

Mechanical energy capable of causing diapycnal mixing in the ocean is transferred to the internal wave field when barotropic tides pass over underwater topography and generate internal tides. The resulting internal tide energy is confined in vertically limited structures, or beams. As internal tide beams (ITBs) propagate through regions of non-uniform stratification in the upper ocean, wave energy can be scattered through multiple reflections and refractions, be vertically trapped, or transferred to non-tidal frequencies through different nonlinear processes. Various observations have shown that ITBs are no longer detectable in horizontal kinetic energy beyond the first surface reflection. Importantly, this implies that some of the internal tide energy no longer propagates in to the abyssal ocean and consequently will not be available to maintain the density stratification. Using the NHM, a nonlinear and nonhydrostatic model based on the MITgcm, simulations of an ITB propagating up to the sea surface are examined in order to quantify the transformation of ITB energy to other motions. We compare and contrast the transformations enabled by idealized, smoothly-varying stratification with transformations enabled by realistic stratification containing a broad-band vertical wavenumber spectrum of variations. Preliminary two-dimensional results show that scattering due to small-scale structure in realistic stratification profiles from Hawaii can lead to energy being vertically trapped near the surface. Idealized simulations of "locally" generated internal solitary waves are analyzed in terms of energy flux transfers from the ITB to solitary waves, higher harmonics, and mean flow. The amount of internal tide energy which propagates back down after near-surface reflection of the ITB in different environments is quantified.

Cultural, Social, and Economic Capital Constructs in International Assessments: An Evaluation Using Exploratory Structural Equation Modeling

ERIC Educational Resources Information Center

Caro, Daniel H.; Sandoval-Hernández, Andrés; Lüdtke, Oliver

2014-01-01

The article employs exploratory structural equation modeling (ESEM) to evaluate constructs of economic, cultural, and social capital in international large-scale assessment (LSA) data from the Progress in International Reading Literacy Study (PIRLS) 2006 and the Programme for International Student Assessment (PISA) 2009. ESEM integrates the…

Trajectory-Based Loads for the Ares I-X Test Flight Vehicle

NASA Technical Reports Server (NTRS)

Vause, Roland F.; Starr, Brett R.

2011-01-01

In trajectory-based loads, the structural engineer treats each point on the trajectory as a load case. Distributed aero, inertial, and propulsion forces are developed for the structural model which are equivalent to the integrated values of the trajectory model. Free-body diagrams are then used to solve for the internal forces, or loads, that keep the applied aero, inertial, and propulsion forces in dynamic equilibrium. There are several advantages to using trajectory-based loads. First, consistency is maintained between the integrated equilibrium equations of the trajectory analysis and the distributed equilibrium equations of the structural analysis. Second, the structural loads equations are tied to the uncertainty model for the trajectory systems analysis model. Atmosphere, aero, propulsion, mass property, and controls uncertainty models all feed into the dispersions that are generated for the trajectory systems analysis model. Changes in any of these input models will affect structural loads response. The trajectory systems model manages these inputs as well as the output from the structural model over thousands of dispersed cases. Large structural models with hundreds of thousands of degrees of freedom would execute too slowly to be an efficient part of several thousand system analyses. Trajectory-based loads provide a means for the structures discipline to be included in the integrated systems analysis. Successful applications of trajectory-based loads methods for the Ares I-X vehicle are covered in this paper. Preliminary design loads were based on 2000 trajectories using Monte Carlo dispersions. Range safety loads were tied to 8423 malfunction turn trajectories. In addition, active control system loads were based on 2000 preflight trajectories using Monte Carlo dispersions.

Controlled etching of internal and external structures of SiO2 nanoparticles using hydrogen bond of polyelectrolytes.

PubMed

Islam, Md Shahinul; Choi, Won San; Lee, Ha-Jin

2014-06-25

We have demonstrated a novel strategy for the synthesis of mesoporous silica nanoparticles (MSNPs) using a surfactant-free method under ambient conditions. By the simple addition of an amine-based polymer (polyethylenimine; PEI) with a high molecular weight to a silica nanoparticle (SNP) solution, two types of MSNPs, including rambutan-like MSNPs (R-MSNPs) and hollow MSNPs (H-MSNPs), were produced. The structural changes of the MSNPs were systematically studied using various reaction conditions (reaction time, molar ratio and molecular weight of PEI, etc.) and were observed using electron microscopic techniques. The formation mechanisms of both MSNPs were carefully investigated using XPS, Raman, and IR spectroscopies. Because the synthesized MSNPs are highly porous materials that contain internal organic/inorganic networks, we investigated the removal/adsorption properties of these MSNPs with respect to pollutants toward possible future use in environmental remediation applications. The H-MSNPs exhibited better environmental remediation capabilities relative to the R-MSNPs because PEI is present between the cobweb-like internal structures of the H-MSNPs, thereby providing a significant number of reaction sites for the adsorption of pollutants. The approach presented here can also be used as a direct method for the preparation of intraconnected networks within the substructures.

Applying Rasch model analysis in the development of the cantonese tone identification test (CANTIT).

PubMed

Lee, Kathy Y S; Lam, Joffee H S; Chan, Kit T Y; van Hasselt, Charles Andrew; Tong, Michael C F

2017-01-01

Applying Rasch analysis to evaluate the internal structure of a lexical tone perception test known as the Cantonese Tone Identification Test (CANTIT). A 75-item pool (CANTIT-75) with pictures and sound tracks was developed. Respondents were required to make a four-alternative forced choice on each item. A short version of 30 items (CANTIT-30) was developed based on fit statistics, difficulty estimates, and content evaluation. Internal structure was evaluated by fit statistics and Rasch Factor Analysis (RFA). 200 children with normal hearing and 141 children with hearing impairment were recruited. For CANTIT-75, all infit and 97% of outfit values were < 2.0. RFA revealed 40.1% of total variance was explained by the Rasch measure. The first residual component explained 2.5% of total variance in an eigenvalue of 3.1. For CANTIT-30, all infit and outfit values were < 2.0. The Rasch measure explained 38.8% of total variance, the first residual component explained 3.9% of total variance in an eigenvalue of 1.9. The Rasch model provides excellent guidance for the development of short forms. Both CANTIT-75 and CANTIT-30 possess satisfactory internal structure as a construct validity evidence in measuring the lexical tone identification ability of the Cantonese speakers.

Internal state variable plasticity-damage modeling of AISI 4140 steel including microstructure-property relations: temperature and strain rate effects

NASA Astrophysics Data System (ADS)

Nacif el Alaoui, Reda

Mechanical structure-property relations have been quantified for AISI 4140 steel. under different strain rates and temperatures. The structure-property relations were used. to calibrate a microstructure-based internal state variable plasticity-damage model for. monotonic tension, compression and torsion plasticity, as well as damage evolution. Strong stress state and temperature dependences were observed for the AISI 4140 steel. Tension tests on three different notched Bridgman specimens were undertaken to study. the damage-triaxiality dependence for model validation purposes. Fracture surface. analysis was performed using Scanning Electron Microscopy (SEM) to quantify the void. nucleation and void sizes in the different specimens. The stress-strain behavior exhibited. a fairly large applied stress state (tension, compression dependence, and torsion), a. moderate temperature dependence, and a relatively small strain rate dependence.

Synthesis of Ag{sub 9}(SiO{sub 4}){sub 2}NO{sub 3} through a reactive flux method and its visible-light photocatalytic performances

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhu, Xianglin; Wang, Zeyan, E-mail: wangzeyan@sdu.edu.cn, E-mail: bbhuang@sdu.edu.cn; Huang, Baibiao, E-mail: wangzeyan@sdu.edu.cn, E-mail: bbhuang@sdu.edu.cn

2015-10-01

Ag{sub 9}(SiO{sub 4}){sub 2}NO{sub 3} was prepared by a reactive flux method. The structures, morphologies, and light absorption properties were investigated. Owing to the polar crystal structure, an internal electric field can be formed inside the material, which can facilitate the photogenerated charge separation during the photocatalytic process. Based on both the wide light absorption spectra and high charge separation efficiency originated from the polarized internal electric field, Ag{sub 9}(SiO{sub 4}){sub 2}NO{sub 3} exhibit higher efficiency over Ag{sub 3}PO{sub 4} during the degradation of organic dyes under visible light irradiation, which is expected to be a potential material for solarmore » energy harvest and conversion.« less

Motor skills in kindergarten: Internal structure, cognitive correlates and relationships to background variables.

PubMed

Oberer, Nicole; Gashaj, Venera; Roebers, Claudia M

2017-04-01

The present study aimed to contribute to the discussion about the relation between motor coordination and executive functions in preschool children. Specifically, the relation between gross and fine motor skills and executive functions as well as the relation to possible background variables (SES, physical activity) were investigated. Based on the data of N=156 kindergarten children the internal structure of motor skills was investigated and confirmed the theoretically assumed subdivision of gross and fine motor skills. Both, gross and fine motor skills correlated significantly with executive functions, whereas the background variables seemed to have no significant impact on the executive functions and motor skills. Higher order control processes are discussed as an explanation of the relation between executive functions and motor skills. Copyright © 2017 Elsevier B.V. All rights reserved.

Nonlinear Analysis and Scaling Laws for Noncircular Composite Structures Subjected to Combined Loads

NASA Technical Reports Server (NTRS)

Hilburger, Mark W.; Rose, Cheryl A.; Starnes, James H., Jr.

2001-01-01

Results from an analytical study of the response of a built-up, multi-cell noncircular composite structure subjected to combined internal pressure and mechanical loads are presented. Nondimensional parameters and scaling laws based on a first-order shear-deformation plate theory are derived for this noncircular composite structure. The scaling laws are used to design sub-scale structural models for predicting the structural response of a full-scale structure representative of a portion of a blended-wing-body transport aircraft. Because of the complexity of the full-scale structure, some of the similitude conditions are relaxed for the sub-scale structural models. Results from a systematic parametric study are used to determine the effects of relaxing selected similitude conditions on the sensitivity of the effectiveness of using the sub-scale structural model response characteristics for predicting the full-scale structure response characteristics.

Education for Global Citizenship: Teacher Agency and Curricular Structure in Ontario Schools

ERIC Educational Resources Information Center

Schweisfurth, Michele

2006-01-01

As a multicultural nation with aspirations to an international peacekeeping role, Canada makes an interesting context in which to study global citizenship education. This article is based on research conducted in Ontario schools. It examines how individual teachers have prioritized global citizenship issues in their teaching, in the context of…

The Preferences of University Instructors Regarding Research and Teaching Duties

ERIC Educational Resources Information Center

Kozmina, Ia. Ia.

2015-01-01

The author assesses the preferences of the faculty and teaching staff at Russian universities with regard to their research and teaching duties. She investigates how they structure their work schedule and academic productivity, and how universities with and without special status differ. The study is based on data from two international studies…

Tackling Social Inequality and Exclusion in Education: From Human Capital to Capabilities

ERIC Educational Resources Information Center

Vandekinderen, Caroline; Roets, Griet; Van Keer, Hilde; Roose, Rudi

2018-01-01

Both in the international context and in Flanders (the Dutch-speaking part of Belgium), research shows that many young people experience social exclusion in relation to education. However, research evidence concerning structural social inequality in education is predominantly underpinned by an outcome-based approach, since educational policies and…

Delivering an Alternative Medicine Resource to the User's Desktop via World Wide Web.

ERIC Educational Resources Information Center

Li, Jie; Wu, Gang; Marks, Ellen; Fan, Weiyu

1998-01-01

Discusses the design and implementation of a World Wide Web-based alternative medicine virtual resource. This homepage integrates regional, national, and international resources and delivers library services to the user's desktop. Goals, structure, and organizational schemes of the system are detailed, and design issues for building such a…

Discursive Positioning in Norwegian Teacher Education: Shifting from Cross-Curricularity to Skills-Based Subject Specialisation

ERIC Educational Resources Information Center

Braathe, Hans Jorgen

2012-01-01

Late and limited organisational differentiation is a characteristic which has, until now, distinguished the structure of education -- including teacher education - in the Nordic countries from that of the rest of Europe. However, this tradition is now challenged by utilitarian ideologies, supported by international comparison tests such as PISA…

78 FR 26639 - Proposed Collection; 60-Day Comment Request: Financial Sustainability of Human Tissue Biobanking...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-07

... and tailored support for national and international biobanks. The survey will collect a combination of structured, quantitative, and free-text descriptive data that characterize the type and maturity of... Collection: The purpose of this web- based survey is to collect information regarding the challenges that...

Learning for Living: Environmental Education in Scotland.

ERIC Educational Resources Information Center

Smyth, J. C., Ed.

The development and progress of environmental education in Scotland since the Gilbert report of 1974 are charted and reviewed in this publication. Environmental education is viewed as opening all disciplines and affecting all age groups. Emphasis is placed on the need for a central resource base where an internal conceptual structure could be…

Classroom Environments and Student Empowerment: An Analysis of Elementary and Secondary Teacher Beliefs

ERIC Educational Resources Information Center

Nichols, Joe D.; Zhang, Guanglan

2011-01-01

This project explored a classroom model of motivation in which the source of student motivation is based on internal mechanisms or structures and classroom student/instructor interactions. It also extended earlier research in which beliefs of veteran, entry level, and preservice teachers have been explored. For this project, 117 elementary…

Culture, Identity, and Structure in Social Exchange: A Web-Based Trust Experiment in the United States and Japan

ERIC Educational Resources Information Center

Kuwabara, Ko; Willer, Robb; Macy, Michael W.; Mashima, Rie; Terai, Shigeru; Yamagishi, Toshio

2007-01-01

Cross-cultural trust and cooperation are important concerns for international markets, political cooperation, and cultural exchange. Until recently, this problem was difficult to study under controlled conditions due to the inability to conduct experiments involving interaction between participants located in physically distant locations. We…

Optimal Robust Motion Controller Design Using Multiobjective Genetic Algorithm

PubMed Central

Svečko, Rajko

2014-01-01

This paper describes the use of a multiobjective genetic algorithm for robust motion controller design. Motion controller structure is based on a disturbance observer in an RIC framework. The RIC approach is presented in the form with internal and external feedback loops, in which an internal disturbance rejection controller and an external performance controller must be synthesised. This paper involves novel objectives for robustness and performance assessments for such an approach. Objective functions for the robustness property of RIC are based on simple even polynomials with nonnegativity conditions. Regional pole placement method is presented with the aims of controllers' structures simplification and their additional arbitrary selection. Regional pole placement involves arbitrary selection of central polynomials for both loops, with additional admissible region of the optimized pole location. Polynomial deviation between selected and optimized polynomials is measured with derived performance objective functions. A multiobjective function is composed of different unrelated criteria such as robust stability, controllers' stability, and time-performance indexes of closed loops. The design of controllers and multiobjective optimization procedure involve a set of the objectives, which are optimized simultaneously with a genetic algorithm—differential evolution. PMID:24987749

A balanced scorecard approach in assessing IT value in healthcare sector: an empirical examination.

PubMed

Wu, Ing-Long; Kuo, Yi-Zu

2012-12-01

Healthcare sector indicates human-based and knowledge-intensive property. Massive IT investments are necessary to maintain competitiveness in this sector. The justification of IT investments is the major concern of senior management. Empirical studies examining IT value have found inconclusive results with little or no improvement in productivity. Little research has been conducted in healthcare sector. The balanced scorecard (BSC) strikes a balance between financial and non-financial measure and has been applied in evaluating organization-based performance. Moreover, healthcare organizations often consider their performance goal at customer satisfaction in addition to financial performance. This research thus proposed a new hierarchical structure for the BSC with placing both finance and customer at the top, internal process at the next, and learning and growth at the bottom. Empirical examination has found the importance of the new BSC structure in assessing IT investments. Learning and growth plays the initial driver for reaching both customer and financial performance through the mediator of internal process. This can provide deep insight into effectively managing IT resources in the hospitals.

[Factor structure of the German version of the BIS/BAS Scales in a population-based sample].

PubMed

Müller, A; Smits, D; Claes, L; de Zwaan, M

2013-02-01

The Behavioural Inhibition System/Behavioural Activation System Scale (BIS/BAS-Scales) developed by Carver and White 1 is a self-rating instrument to assess the dispositional sensitivity to punishment and reward. The present work aims to examine the factor structure of the German version of the BIS/BAS-Scales. In a large German population-based sample (n = 1881) the model fit of several factor models was tested by using confirmatory factor analyses. The best model fit was found for the 5-factor model with two BIS (anxiety, fear) and three BAS (drive, reward responsiveness, fun seeking) scales, whereas the BIS-fear, the BAS-reward responsiveness, and the BAS-fun seeking subscales showed low internal consistency. The BIS/BAS scales were negatively correlated with age, and women reported higher BIS subscale scores than men. Confirmatory factor analyses suggest a 5-factor model. However, due to the low internal reliability of some of the subscales the use of this model is questionable. © Georg Thieme Verlag KG Stuttgart · New York.

Damage Arresting Composites for Shaped Vehicles

NASA Technical Reports Server (NTRS)

Velicki, Alex

2009-01-01

This report describes the development of a novel structural solution that addresses the demanding fuselage loading requirements for the Hybrid Wing or Blended Wing Body configurations that are described in NASA NRA subtopic A2A.3, "Materials and Structures for Wing Components and Non-Circular Fuselage." The phase I portion of this task includes a comprehensive finite element model-based structural sizing exercise performed using the BWB airplane configuration to generate internal loads and fuselage panel weights for an advanced Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) structural concept. An accompanying element-level test program is also described which substantiates the analytical results and calculation methods used in the trade study. The phase II plan for the continuation of this research is also included herein.

An active seismic experiment at Tenerife Island (Canary Island, Spain): Imaging an active volcano edifice

NASA Astrophysics Data System (ADS)

Garcia-Yeguas, A.; Ibañez, J. M.; Rietbrock, A.; Tom-Teidevs, G.

2008-12-01

An active seismic experiment to study the internal structure of Teide Volcano was carried out on Tenerife, a volcanic island in Spain's Canary Islands. The main objective of the TOM-TEIDEVS experiment is to obtain a 3-dimensional structural image of Teide Volcano using seismic tomography and seismic reflection/refraction imaging techniques. At present, knowledge of the deeper structure of Teide and Tenerife is very limited, with proposed structural models mainly based on sparse geophysical and geological data. This multinational experiment which involves institutes from Spain, Italy, the United Kingdom, Ireland, and Mexico will generate a unique high resolution structural image of the active volcano edifice and will further our understanding of volcanic processes.

Imaging an Active Volcano Edifice at Tenerife Island, Spain

NASA Astrophysics Data System (ADS)

Ibáñez, Jesús M.; Rietbrock, Andreas; García-Yeguas, Araceli

2008-08-01

An active seismic experiment to study the internal structure of Teide volcano is being carried out on Tenerife, a volcanic island in Spain's Canary Islands archipelago. The main objective of the Tomography at Teide Volcano Spain (TOM-TEIDEVS) experiment, begun in January 2007, is to obtain a three-dimensional (3-D) structural image of Teide volcano using seismic tomography and seismic reflection/refraction imaging techniques. At present, knowledge of the deeper structure of Teide and Tenerife is very limited, with proposed structural models based mainly on sparse geophysical and geological data. The multinational experiment-involving institutes from Spain, the United Kingdom, Italy, Ireland, and Mexico-will generate a unique high-resolution structural image of the active volcano edifice and will further our understanding of volcanic processes.

Students' Knowledge about the Internal Structure of Mice and Cockroaches in Their Environment

ERIC Educational Resources Information Center

Kilic, Selda

2013-01-01

The aim of this study is to determine 9th class students knowledge about the internal structures of mice and cockroaches using drawings. Drawings of 122 students from the 9th class of a high school in the center of Konya about the internal structures of mice and cockroaches have been analyzed. Drawings were analyzed independently by two…

Roles of dynamical symmetry breaking in driving oblate-prolate transitions of atomic clusters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oka, Yurie, E-mail: ok-yu@fuji.waseda.jp; Yanao, Tomohiro, E-mail: yanao@waseda.jp; Koon, Wang Sang, E-mail: koon@cds.caltech.edu

2015-04-07

This paper explores the driving mechanisms for structural transitions of atomic clusters between oblate and prolate isomers. We employ the hyperspherical coordinates to investigate structural dynamics of a seven-atom cluster at a coarse-grained level in terms of the dynamics of three gyration radii and three principal axes, which characterize overall mass distributions of the cluster. Dynamics of gyration radii is governed by two kinds of forces. One is the potential force originating from the interactions between atoms. The other is the dynamical forces called the internal centrifugal forces, which originate from twisting and shearing motions of the system. The internalmore » centrifugal force arising from twisting motions has an effect of breaking the symmetry between two gyration radii. As a result, in an oblate isomer, activation of the internal centrifugal force that has the effect of breaking the symmetry between the two largest gyration radii is crucial in triggering structural transitions into prolate isomers. In a prolate isomer, on the other hand, activation of the internal centrifugal force that has the effect of breaking the symmetry between the two smallest gyration radii is crucial in triggering structural transitions into oblate isomers. Activation of a twisting motion that switches the movement patterns of three principal axes is also important for the onset of structural transitions between oblate and prolate isomers. Based on these trigger mechanisms, we finally show that selective activations of specific gyration radii and twisting motions, depending on the isomer of the cluster, can effectively induce structural transitions of the cluster. The results presented here could provide further insights into the control of molecular reactions.« less

Structure Matters: The Role of Clique Hierarchy in the Relationship Between Adolescent Social Status and Aggression and Prosociality.

PubMed

Pattiselanno, Kim; Dijkstra, Jan Kornelis; Steglich, Christian; Vollebergh, Wilma; Veenstra, René

2015-12-01

Peer cliques form an important context for the social development of adolescents. Although clique members are often similar in social status, also within cliques, status differences exist. How differences in social status between clique members are related to behaviors of its individual members is rather unknown. This study examined to what extent the relationship of individual social status (i.e., perceived popularity) with aggression and prosocial behavior depends on the level of internal clique hierarchy. The sample consists of 2674 adolescents (49.8% boys), with a mean age of 14.02. We focused specifically on physical and relational aggression, and practical and emotional support, because these behaviors have shown to be of great importance for social relationships and social standing among adolescents. The internal status hierarchy of cliques was based on the variation in individual social status between clique members (i.e., clique hierarchization) and the structure of status scores within a clique (pyramid shape, inverted pyramid, or equal distribution of social status scores) (i.e., clique status structure). The results showed that differences in aggressive and prosocial behaviors were particularly moderated by clique status structure: aggression was stronger related to individual social status in (girls') cliques where the clique status structure reflected an inverted pyramid with relatively more high status adolescents within the clique than low status peers, and prosocial behavior showed a significant relationship with individual social status, again predominantly in inverted pyramid structured (boys' and girls') cliques. Furthermore, these effects differed by types of gender cliques: the associations were found in same gender but not mixed-gender cliques. The findings stress the importance of taking into account internal clique characteristics when studying adolescent social status in relationship to aggression and prosociality.

Nanoscale Phase-Separated Structure in Core-Shell Nanoparticles of SiO2-Si1-xGexO2 Glass Revealed by Electron Microscopy.

PubMed

Kubo, Yugo; Yonezawa, Kazuhiro

2017-09-05

SiO 2 -based optical fibers are indispensable components of modern information communication technologies. It has recently become increasingly important to establish a technique for visualizing the nanoscale phase-separated structure inside SiO 2 -GeO 2 glass nanoparticles during the manufacturing of SiO 2 -GeO 2 fibers. This is because the rapidly increasing price of Ge has made it necessary to improve the Ge yield by clarifying the detailed mechanism of Ge diffusion into SiO 2 . However, direct observation of the internal nanostructure of glass particles has been extremely difficult, mainly due to electrostatic charging and the damage induced by electron and X-ray irradiation. In the present study, we used state-of-the-art scanning electron microscopy (SEM), scanning transmission electron microscopy (STEM), and energy dispersive X-ray spectroscopy (EDX) to examine cross-sectional samples of SiO 2 -GeO 2 particles embedded in an epoxy resin, which were fabricated using a broad Ar ion beam and a focused Ga ion beam. These advanced techniques enabled us to observe the internal phase-separated structure of the nanoparticles. We have for the first time clearly determined the SiO 2 -Si 1-x Ge x O 2 core-shell structure of such particles, the element distribution, the degree of crystallinity, and the quantitative chemical composition of microscopic regions, and we discuss the formation mechanism for the observed structure. The proposed imaging protocol is highly promising for studying the internal structure of various core-shell nanoparticles, which affects their catalytic, optical, and electronic properties.

Loss of G-A base pairs is insufficient for achieving a large opening of U4 snRNA K-turn motif.

PubMed

Cojocaru, Vlad; Klement, Reinhard; Jovin, Thomas M

2005-01-01

Upon binding to the 15.5K protein, two tandem-sheared G-A base pairs are formed in the internal loop of the kink-turn motif of U4 snRNA (Kt-U4). We have reported that the folding of Kt-U4 is assisted by protein binding. Unstable interactions that contribute to a large opening of the free RNA ('k-e motion') were identified using locally enhanced sampling molecular dynamics simulations, results that agree with experiments. A detailed analysis of the simulations reveals that the k-e motion in Kt-U4 is triggered both by loss of G-A base pairs in the internal loop and backbone flexibility in the stems. Essential dynamics show that the loss of G-A base pairs is correlated along the first mode but anti-correlated along the third mode with the k-e motion. Moreover, when enhanced sampling was confined to the internal loop, the RNA adopted an alternative conformation characterized by a sharper kink, opening of G-A base pairs and modified stacking interactions. Thus, loss of G-A base pairs is insufficient for achieving a large opening of the free RNA. These findings, supported by previously published RNA structure probing experiments, suggest that G-A base pair formation occurs upon protein binding, thereby stabilizing a selective orientation of the stems.

The Impact of Internal Wave Seasonality on the Continental Shelf Energy Budget

NASA Astrophysics Data System (ADS)

Wihsgott, Juliane U.; Sharples, Jonathan; Hopkins, Joanne; Palmer, Matthew R.; Mattias Green, J. A.

2017-04-01

Heating-stirring models are widely used to simulate the timing and strength of stratification in continental shelf environments. Such models are based on bulk potential energy (PE) budgets: the loss of PE due to thermal stratification is balanced by wind and tidal mixing. The model often fails to accurately predict the observed vertical structure, as it only considers forces acting on the surface and bottom boundary of the water column. This highlights the need for additional internal energy sources to close this budget, and produce an accurate seasonal cycle of stratification. We present new results that test the impact of boundary layer and internal wave forcing on stratification and vertical density structure in continental shelves. A new series of continuous measurements of full water depth vertical structure, dynamics and meteorological data spanning 17 months (March'14-July'15) provide unprecedented coverage over a full seasonal cycle at a station 120 km north-east from the continental shelf break. We observe a highly variable but energetic internal wave field from the onset of stratification that suggests a continuous supply of internal PE. The heating-stirring model reproduces bulk characteristics of the seasonal cycle. While it accurately predicts the timing of the onset in spring and peak stratification in late summer there is a persistent 20 J m-3 positive offset between the model and observations throughout this period. By including a source of internal energy in the model we improve the prediction for the strength of stratification and the vertical distribution of heat. Yet a constant source of PE seems to result in a seasonal discrepancy resulting in too little mixing during strong stratification and too much mixing during transient periods. The discrepancy seen in the model is consistent with the seasonality observed in the internal wave field. We will establish the role that changing stratification (N2) exerts on the internal wave field and vice versa. Ultimately, we will demonstrate how the strength and vertical range of shear varies seasonally and what effect it has on supplying PE to midwater mixing.

[Innovative educational technology in the teaching of propaedeutic of internal diseases].

PubMed

Тusupbekova, К; Bakirova, R; Nursultanova, S

2015-03-01

This article presents analysis of the results of inculcation of innovative learning technologies in teaching on propaedeutic of internal diseases which is first clinical discipline faced by medical students of the University. Credit-modular training included integration of propaedeutic of internal diseases with basic disciplines of the third year (the normal anatomy, physiology, pathological anatomy, histology, pathophysiology, visual diagnostics and pharmacology). There are 8 models on following systems: respiratory, cardiovascular, musculoskeletal, endocrine, urogenital, hematopoietic, nervous, digestive. The innovative implementation of learning technologies (Problem-based learning, clinical cases, team-oriented teaching, lectures, symposium lectures, discussions, role plays, etc.) and knowledge control (mini-clinical examination, objective structured clinical exam, comprehensive testing) help students to acquire clinical skills, team working and skills of researching work.

Impurity engineering of Czochralski silicon used for ultra large-scaled-integrated circuits

NASA Astrophysics Data System (ADS)

Yang, Deren; Chen, Jiahe; Ma, Xiangyang; Que, Duanlin

2009-01-01

Impurities in Czochralski silicon (Cz-Si) used for ultra large-scaled-integrated (ULSI) circuits have been believed to deteriorate the performance of devices. In this paper, a review of the recent processes from our investigation on internal gettering in Cz-Si wafers which were doped with nitrogen, germanium and/or high content of carbon is presented. It has been suggested that those impurities enhance oxygen precipitation, and create both denser bulk microdefects and enough denuded zone with the desirable width, which is benefit of the internal gettering of metal contamination. Based on the experimental facts, a potential mechanism of impurity doping on the internal gettering structure is interpreted and, a new concept of 'impurity engineering' for Cz-Si used for ULSI is proposed.

Structure and Development of the List of Prohibited Substances and Methods.

PubMed

Kinahan, Audrey; Budgett, Richard; Mazzoni, Irene

2017-01-01

The list of prohibited substances and methods (the List) is the international standard that determines what is prohibited in sport both in- and out-of-competition. Since 2004, the official text of the List is produced by the World Anti-Doping Agency (WADA), the international independent organization responsible for promoting, coordinating, and monitoring the fight against doping in sport. Originally based on the prohibited lists established by the International Olympic Committee, the List has evolved to incorporate new doping trends, distinguish permitted from prohibited routes of administration, and adjust to new analytical and pharmacological breakthroughs. In this chapter, the elements that compose the List as well as the updates over the years are presented. © 2017 S. Karger AG, Basel.

Monitoring of changes in cluster structures in water under AC magnetic field

NASA Astrophysics Data System (ADS)

Usanov, A. D.; Ulyanov, S. S.; Ilyukhina, N. S.; Usanov, D. A.

2016-01-01

A fundamental possibility of visualizing cluster structures formed in distilled water by an optical method based on the analysis of dynamic speckle structures is demonstrated. It is shown for the first time that, in contrast to the existing concepts, water clusters can be rather large (up to 200 -m in size), and their lifetime is several tens of seconds. These clusters are found to have an internal spatially inhomogeneous structure, constantly changing in time. The properties of magnetized and non-magnetized water are found to differ significantly. In particular, the number of clusters formed in magnetized water is several times larger than that formed in the same volume of non-magnetized water.

Compton imaging tomography technique for NDE of large nonuniform structures

NASA Astrophysics Data System (ADS)

Grubsky, Victor; Romanov, Volodymyr; Patton, Ned; Jannson, Tomasz

2011-09-01

In this paper we describe a new nondestructive evaluation (NDE) technique called Compton Imaging Tomography (CIT) for reconstructing the complete three-dimensional internal structure of an object, based on the registration of multiple two-dimensional Compton-scattered x-ray images of the object. CIT provides high resolution and sensitivity with virtually any material, including lightweight structures and organics, which normally pose problems in conventional x-ray computed tomography because of low contrast. The CIT technique requires only one-sided access to the object, has no limitation on the object's size, and can be applied to high-resolution real-time in situ NDE of large aircraft/spacecraft structures and components. Theoretical and experimental results will be presented.

Laser ultrasonic techniques for assessment of tooth structure

NASA Astrophysics Data System (ADS)

Blodgett, David W.; Baldwin, Kevin C.

2000-06-01

Dental health care and research workers require a means of imaging the structures within teeth in vivo. For example, there is a need to image the margins of a restoration for the detection of poor bonding or voids between the restorative material and the dentin. With conventional x-ray techniques, it is difficult to detect cracks and to visualize interfaces between hard media. This due to the x-ray providing only a 2 dimensional projection of the internal structure (i.e. a silhouette). In addition, a high resolution imaging modality is needed to detect tooth decay in its early stages. If decay can be detected early enough, the process can be monitored and interventional procedures, such as fluoride washes and controlled diet, can be initiated which can help the tooth to re-mineralize itself. Currently employed x-ray imaging is incapable of detecting decay at a stage early enough to avoid invasive cavity preparation followed by a restoration with a synthetic material. Other clinical applications include the visualization of periodontal defects, the localization of intraosseous lesions, and determining the degree of osseointegration between a dental implant and the surrounding bone. A means of assessing the internal structure of the tooth based upon use of high frequency, highly localized ultrasound (acoustic waves) generated by a laser pulse is discussed. Optical interferometric detection of ultrasound provides a complementary technique with a very small detection footprint. Initial results using laser-based ultrasound for assessment of dental structures are presented. Discussion will center on the adaptability of this technique to clinical applications.

[New idea of traditional Chinese medicine quality control based on "composition structure" theory].

PubMed

Liu, Dan; Jia, Xiaobin; Yu, Danhong

2012-03-01

On the road of the modern Chinese medicine developing internationally, there is a key issues that setting up a reasonable, accurate and be quantified quality evaluation system which is comply with the basic theory of Chinese medicine. Based on the overall understanding of the role of traditional Chinese medicine components, author suggested that the idea of "structural components" theory should be embedded into the system and thought the Chinese medicine play a multi-target, multi-channel pharmacodynamic effects founded on the specific microcosmic structural relationship between the components and the components within the group. At present, the way of Chinese pharmacopoeia checking the quality of Chinese medicine is mainly depends on controlling the single or multiple targets of ingredients. In fact, this way is out of the overall effectiveness of the Chinese medicine, so we can not thoroughly controlling the quality of Chinese medicine from the essence of the Chinese medicine. Secondly, it's only macro-structural quantity that the Chinese pharmacopoeia just controlling the less effective ingredients, this is not enough to reflect the internal microstructure of the integrity and systematic. In other words, this cannot reflect the structural components of the Chinese medicine (the essence of traditional Chinese medicine). In view of above mentioned reasons, the author propose the new idea on the quality control in the medicine that quantify the ratio structural relationship in component and the ingredients of the components, set the optimal controlling proportion between the components and ingredients. At the same time, author thought we should conduct the depth study in the micro-quantified the multi-component and multi-ingredient, in the process of studying the material basis of Chinese medicine. Therefore, it could establish a more rational basis for the Chinese medicine quality controlling system.

Understanding the Potential Content and Structure of an International Convention on the Human Rights of People with Disabilities: Sample Treaty Provisions Drawn from Existing International Instruments. A Reference Tool.

ERIC Educational Resources Information Center

Lord, Janet E.

This document is designed to prepare advocates in the international disability community for productive participation in the development of international conventions on the human rights of people with disabilities. Knowledge of the standard categories of international law provisions will help participants address issues related to the structure of…

Reliability and Validity of Assessing User Satisfaction With Web-Based Health Interventions

PubMed Central

Lehr, Dirk; Reis, Dorota; Vis, Christiaan; Riper, Heleen; Berking, Matthias; Ebert, David Daniel

2016-01-01

Background The perspective of users should be taken into account in the evaluation of Web-based health interventions. Assessing the users’ satisfaction with the intervention they receive could enhance the evidence for the intervention effects. Thus, there is a need for valid and reliable measures to assess satisfaction with Web-based health interventions. Objective The objective of this study was to analyze the reliability, factorial structure, and construct validity of the Client Satisfaction Questionnaire adapted to Internet-based interventions (CSQ-I). Methods The psychometric quality of the CSQ-I was analyzed in user samples from 2 separate randomized controlled trials evaluating Web-based health interventions, one from a depression prevention intervention (sample 1, N=174) and the other from a stress management intervention (sample 2, N=111). At first, the underlying measurement model of the CSQ-I was analyzed to determine the internal consistency. The factorial structure of the scale and the measurement invariance across groups were tested by multigroup confirmatory factor analyses. Additionally, the construct validity of the scale was examined by comparing satisfaction scores with the primary clinical outcome. Results Multigroup confirmatory analyses on the scale yielded a one-factorial structure with a good fit (root-mean-square error of approximation =.09, comparative fit index =.96, standardized root-mean-square residual =.05) that showed partial strong invariance across the 2 samples. The scale showed very good reliability, indicated by McDonald omegas of .95 in sample 1 and .93 in sample 2. Significant correlations with change in depressive symptoms (r=−.35, P<.001) and perceived stress (r=−.48, P<.001) demonstrated the construct validity of the scale. Conclusions The proven internal consistency, factorial structure, and construct validity of the CSQ-I indicate a good overall psychometric quality of the measure to assess the user’s general satisfaction with Web-based interventions for depression and stress management. Multigroup analyses indicate its robustness across different samples. Thus, the CSQ-I seems to be a suitable measure to consider the user’s perspective in the overall evaluation of Web-based health interventions. PMID:27582341

Reliability and Validity of Assessing User Satisfaction With Web-Based Health Interventions.

PubMed

Boß, Leif; Lehr, Dirk; Reis, Dorota; Vis, Christiaan; Riper, Heleen; Berking, Matthias; Ebert, David Daniel

2016-08-31

The perspective of users should be taken into account in the evaluation of Web-based health interventions. Assessing the users' satisfaction with the intervention they receive could enhance the evidence for the intervention effects. Thus, there is a need for valid and reliable measures to assess satisfaction with Web-based health interventions. The objective of this study was to analyze the reliability, factorial structure, and construct validity of the Client Satisfaction Questionnaire adapted to Internet-based interventions (CSQ-I). The psychometric quality of the CSQ-I was analyzed in user samples from 2 separate randomized controlled trials evaluating Web-based health interventions, one from a depression prevention intervention (sample 1, N=174) and the other from a stress management intervention (sample 2, N=111). At first, the underlying measurement model of the CSQ-I was analyzed to determine the internal consistency. The factorial structure of the scale and the measurement invariance across groups were tested by multigroup confirmatory factor analyses. Additionally, the construct validity of the scale was examined by comparing satisfaction scores with the primary clinical outcome. Multigroup confirmatory analyses on the scale yielded a one-factorial structure with a good fit (root-mean-square error of approximation =.09, comparative fit index =.96, standardized root-mean-square residual =.05) that showed partial strong invariance across the 2 samples. The scale showed very good reliability, indicated by McDonald omegas of .95 in sample 1 and .93 in sample 2. Significant correlations with change in depressive symptoms (r=-.35, P<.001) and perceived stress (r=-.48, P<.001) demonstrated the construct validity of the scale. The proven internal consistency, factorial structure, and construct validity of the CSQ-I indicate a good overall psychometric quality of the measure to assess the user's general satisfaction with Web-based interventions for depression and stress management. Multigroup analyses indicate its robustness across different samples. Thus, the CSQ-I seems to be a suitable measure to consider the user's perspective in the overall evaluation of Web-based health interventions.

Case study of inclined sporadic E layers in the Earth's ionosphere observed by CHAMP/GPS radio occultations: Coupling between the tilted plasma layers and internal waves

NASA Astrophysics Data System (ADS)

Gubenko, Vladimir N.; Pavelyev, A. G.; Kirillovich, I. A.; Liou, Y.-A.

2018-04-01

We have used the radio occultation (RO) satellite data CHAMP/GPS (Challenging Minisatellite Payload/Global Positioning System) for studying the ionosphere of the Earth. A method for deriving the parameters of ionospheric structures is based upon an analysis of the RO signal variations in the phase path and intensity. This method allows one to estimate the spatial displacement of a plasma layer with respect to the ray perigee, and to determine the layer inclination and height correction values. In this paper, we focus on the case study of inclined sporadic E (Es) layers in the high-latitude ionosphere based on available CHAMP RO data. Assuming that the internal gravity waves (IGWs) with the phase-fronts parallel to the ionization layer surfaces are responsible for the tilt angles of sporadic plasma layers, we have developed a new technique for determining the parameters of IGWs linked with the inclined Es structures. A small-scale internal wave may be modulating initially horizontal Es layer in height and causing a direction of the plasma density gradient to be rotated and aligned with that of the wave propagation vector k. The results of determination of the intrinsic wave frequency and period, vertical and horizontal wavelengths, intrinsic vertical and horizontal phase speeds, and other characteristics of IGWs under study are presented and discussed.

Environmentally Compatible Vapor-Phase Corrosion Inhibitor for Space Shuttle Hardware

NASA Technical Reports Server (NTRS)

Novak, Howard L.; Hall, Phillip B.

2003-01-01

USA-SRB Element is responsible for the assembly and refurbishment of the non-motor components of the SRB as part of Space Shuttle. Thrust Vector Control (TVC) frames structurally support components of the TVC system located in the aft skirt of the SRB. TVC frames are exposed to the seacoast environment after refurbishment and, also, to seawater immersion after splashdown, and during tow-back to CCAFS-Hangar AF refurbishment facilities. During refurbishment operations it was found that numerous TVC frames were experiencing internal corrosion and coating failures, both from salt air and seawater intrusions. Inspectors using borescopes would visually examine the internal cavities of the complicated aluminum alloy welded tubular structure. It was very difficult for inspectors to examine cavity corners and tubing intersections and particularly, to determine the extent of the corrosion and coating anomalies. Physical access to TVC frame internal cavities for corrosion removal and coating repair was virtually impossible, and an improved method using a Liquid (water based) Vapor-phase Corrosion Inhibitor (LVCI) for preventing initiation of new corrosion, and mitigating and/or stopping existing corrosion growth was recommended in lieu of hazardous paint solvents and high VOC / solvent based corrosion inhibitors. In addition, the borescopic inspection method used to detect corrosion, and/or coating anomalies had severe limitations because of part geometry, and an improved non-destructive inspection (NDI) method using Neutron Radiography (N-Ray) was also recommended.

Environmentally Compatible Vapor-Phase Corrosion Inhibitor for Space Shuttle Hardware

NASA Technical Reports Server (NTRS)

Novak, Howard L.; Hall, Phillip B.; Martin, David (Technical Monitor)

2002-01-01

USA-SRB Element is responsible for the assembly and refurbishment of the non-motor components of the SRB as part of Space Shuttle. Thrust Vector Control (TVC) frames structurally support components of the TVC system located in the aft skirt of the SRB (Solid Rocket Booster). TVC frames are exposed to the seacoast environment after refurbishment and, also, to seawater immersion after splashdown, and during tow-back to CCAFS-Hangar AF refurbishment facilities. During refurbishment operations it was found that numerous TVC frames were experiencing internal corrosion and coating failures, both from salt air and seawater intrusions. Inspectors using borescopes would visually examine the internal cavities of the complicated aluminum alloy welded tubular structure. It was very difficult for inspectors to examine cavity corners and tubing intersections and particularly. to determine the extent of the corrosion and coating anomalies. Physical access to TVC frame internal cavities for corrosion removal and coating repair was virtually impossible, and an improved method using a Liquid (water based) Vapor-phase Corrosion Inhibitor (LVCI) for preventing initiation of new corrosion, and mitigating and/or stopping existing corrosion growth was recommended in lieu of hazardous paint solvents and high VOC/solvent based corrosion inhibitors. In addition, the borescopic inspection method used to detect corrosion, and/or coating anomalies had severe limitations because of part geometry, and an improved non-destructive inspection (NDI) method using Neutron Radiography (N-Ray) was also recommended.

Environmentally Compatible Vapor-Phase Corrosion Inhibitor for Space Shuttle Hardware

NASA Technical Reports Server (NTRS)

Novak, Howard L.; Hall, Phillip B.; McCool, Alex (Technical Monitor)

2001-01-01

USA-SRB Element is responsible for the assembly and refurbishment of the non-motor components of the SRB as part of Space Shuttle. Thrust Vector Control (TVC) frames structurally support components of the TVC system located in the aft skirt of the SRB. TVC frames are exposed to the seacoast environment after refurbishment and, also, to seawater immersion after splashdown, and during tow-back to CCAFS-Hangar AF refurbishment facilities. During refurbishment operations it was found that numerous TVC frames were experiencing internal corrosion and coating failures, both from salt air and seawater intrusions. Inspectors using borescopes would visually examine the internal cavities of the complicated aluminum alloy welded tubular structure. It was very difficult for inspectors to examine cavity corners and tubing intersections and particularly, to determine the extent of the corrosion and coating anomalies. Physical access to TVC frame internal cavities for corrosion removal and coating repair was virtually impossible, and an improved method using a Liquid (water based) Vapor-phase Corrosion Inhibitor (LVCI) for preventing initiation of new corrosion, and mitigating and/or stopping existing corrosion growth was recommended in lieu of hazardous paint solvents and high VOC/solvent based corrosion inhibitors. In addition, the borescopic inspection method used to detect corrosion, and/or coating anomalies had severe limitations because of part geometry, and an improved non-destructive inspection (NDI) method using Neutron Radiography (N-Ray) was also recommended.

Probing a 2-Aminobenzimidazole Library for Binding to RNA Internal Loops via Two-Dimensional Combinatorial Screening

PubMed Central

Velegapudi, Sai Pradeep; Pushechnikov, Alexei; Labuda, Lucas P.; French, Jonathan M.; Disney, Matthew D.

2012-01-01

There are many potential RNA drug targets in bacterial, viral, and the human transcriptomes. However, there are few small molecules that modulate RNA function. This is due, in part, to a lack of fundamental understanding about RNA-ligand interactions including the types of small molecules that bind to RNA structural elements and the RNA structural elements that bind to small molecules. In an effort to better understand RNA-ligand interactions, we diversified the 2-aminobenzimidazole core (2AB) and probed the resulting library for binding to a library of RNA internal loops. We chose the 2AB core for these studies because it is a privileged scaffold for binding RNA based on previous reports. These studies identified that N-methyl pyrrolidine, imidazole, and propylamine diversity elements at the R1 position increase binding to internal loops; variability at the R2 position is well tolerated. The preferred RNA loop space was also determined for five ligands using a statistical approach and identified trends that lead to selective recognition. PMID:22958065

Factor Structure, Internal Consistency, and Screening Sensitivity of the GARS-2 in a Developmental Disabilities Sample

PubMed Central

Volker, Martin A.; Dua, Elissa H.; Lopata, Christopher; Thomeer, Marcus L.; Toomey, Jennifer A.; Smerbeck, Audrey M.; Rodgers, Jonathan D.; Popkin, Joshua R.; Nelson, Andrew T.; Lee, Gloria K.

2016-01-01

The Gilliam Autism Rating Scale-Second Edition (GARS-2) is a widely used screening instrument that assists in the identification and diagnosis of autism. The purpose of this study was to examine the factor structure, internal consistency, and screening sensitivity of the GARS-2 using ratings from special education teaching staff for a sample of 240 individuals with autism or other significant developmental disabilities. Exploratory factor analysis yielded a correlated three-factor solution similar to that found in 2005 by Lecavalier for the original GARS. Though the three factors appeared to be reasonably consistent with the intended constructs of the three GARS-2 subscales, the analysis indicated that more than a third of the GARS-2 items were assigned to the wrong subscale. Internal consistency estimates met or exceeded standards for screening and were generally higher than those in previous studies. Screening sensitivity was .65 and specificity was .81 for the Autism Index using a cut score of 85. Based on these findings, recommendations are made for instrument revision. PMID:26981279

Climate change influence on the internal structure of talus slopes in the Arctic - A case study from the southern Spitsbergen, Norway

NASA Astrophysics Data System (ADS)

Senderak, K.; Kondracka, M.; Gądek, B.

2017-12-01

Talus slopes are present in all geographical altitudes, but the most active and dynamic slopes occur in high-mountain and polar areas. Spitsbergen, Norwegian archipelago in the Arctic, combines these two environments, therefore, the talus slopes develop in specific environmental conditions that have changed since the beginning of deglaciation. On Spitsbergen, which is 60% glaciated, talus slope evolution depends frequently on the interaction with glaciers, as well as the size of sediment supply area, the lithology, and the intensive of rock weathering. The warming of climate in the Arctic cause the identifiable changes in the internal structures of talus slopes associated with i.e. the melting of glaciers and the high activity of many morphogenetic processes on slope surface. The identification of these changes is a key to understanding of climate change influence (direct and indirect influence) on talus slope evolution. Our work presents the results of research, mainly based on the measurements using electrical resistivity tomography method (ERT) and ground-penetrating radar method (GPR), which were made on the talus slopes of southern Spitsbergen in the vicinity of Polish Polar Station in Hornsund. The geophysical surveys and geomorphological observations show that the climatic factor plays the significant role in the development of slopes, what is clearly visible when analyzing the whole slope systems in the selected glacial valleys (partly glaciated). The differences in the internal structure can depend on distance from the glacier and age of form. This mainly concerns the volume of buried glacial ice in slope material, the thickness of talus slopes, the depth of permafrost and active layer, the stored sedimentological structures including e.g. the traces of fresh material supply. New data on the internal structure of talus slopes developing in the present glaciated area allow for discussions on the talus slope evolution, which, according to the authors, needs to be detailed.

Intramolecular energy transfer and the driving mechanisms for large-amplitude collective motions of clusters

NASA Astrophysics Data System (ADS)

Yanao, Tomohiro; Koon, Wang Sang; Marsden, Jerrold E.

2009-04-01

This paper uncovers novel and specific dynamical mechanisms that initiate large-amplitude collective motions in polyatomic molecules. These mechanisms are understood in terms of intramolecular energy transfer between modes and driving forces. Structural transition dynamics of a six-atom cluster between a symmetric and an elongated isomer is highlighted as an illustrative example of what is a general message. First, we introduce a general method of hyperspherical mode analysis to analyze the energy transfer among internal modes of polyatomic molecules. In this method, the (3n-6) internal modes of an n-atom molecule are classified generally into three coarse level gyration-radius modes, three fine level twisting modes, and (3n-12) fine level shearing modes. We show that a large amount of kinetic energy flows into the gyration-radius modes when the cluster undergoes structural transitions by changing its mass distribution. Based on this fact, we construct a reactive mode as a linear combination of the three gyration-radius modes. It is shown that before the reactive mode acquires a large amount of kinetic energy, activation or inactivation of the twisting modes, depending on the geometry of the isomer, plays crucial roles for the onset of a structural transition. Specifically, in a symmetric isomer with a spherical mass distribution, activation of specific twisting modes drives the structural transition into an elongated isomer by inducing a strong internal centrifugal force, which has the effect of elongating the mass distribution of the system. On the other hand, in an elongated isomer, inactivation of specific twisting modes initiates the structural transition into a symmetric isomer with lower potential energy by suppressing the elongation effect of the internal centrifugal force and making the effects of the potential force dominant. This driving mechanism for reactions as well as the present method of hyperspherical mode analysis should be widely applicable to molecular reactions in which a system changes its overall mass distribution in a significant way.

Factor structure of the functional movement screen in marine officer candidates.

PubMed

Kazman, Josh B; Galecki, Jeffrey M; Lisman, Peter; Deuster, Patricia A; OʼConnor, Francis G

2014-03-01

Functional movement screening (FMS) is a musculoskeletal assessment that is intended to fill a gap between preparticipation examinations and performance tests. Functional movement screening consists of 7 standardized movements involving multiple muscle groups that are rated 0-3 during performance; scores are combined into a final score, which is intended to predict injury risk. This use of a sum-score in this manner assumes that the items are unidimensional and scores are internally consistent, which are measures of internal reliability. Despite research into the FMS' predictive value and interrater reliability, research has not assessed its psychometric properties. The present study is a standard psychometric analysis of the FMS and is the first to assess the internal consistency and factor structure of the FMS, using Cronbach's alpha and exploratory factor analysis (EFA). Using a cohort of 877 male and 57 female Marine officer candidates who performed the FMS, EFA of polychoric correlations with varimax rotation was conducted to explore the structure of the FMS. Tests were repeated on the original scores, which integrated feelings of pain during movement (0-3), and then on scores discounting the pain instruction and based only on the performance (1-3), to determine whether pain ratings affected the factor structure. The average FMS score was 16.7 ± 1.8. Cronbach's alpha was 0.39. Exploratory factor analysis availed 2 components accounting for 21 and 17% and consisting of separate individual movements (shoulder mobility and deep squat, respectively). Analysis on scores discounting pain showed similar results. The factor structures were not interpretable, and the low Cronbach's alpha suggests a lack of internal consistency in FMS sum scores. Results do not offer support for validity of the FMS sum score as a unidimensional construct. In the absence of additional psychometric research, caution is warranted when using the FMS sum score.

Validity and measurement invariance of the Physical Restraint Use Questionnaire (PRUQ) in nursing staff.

PubMed

Penelo, Eva; Estévez-Guerra, Gabriel J; Fariña-López, Emilio

2018-03-01

To study the internal structure and measurement invariance of the Physical Restraint Use Questionnaire and to compare perceptions, experience and training, regarding use of physical restraint on the older people between nursing staff working in hospitals and nursing homes. Physical restraint of patients is still common in many countries, and thus, it is important to study the attitudes of nursing staff. One of the most common tools used to assess perceptions regarding its use is the Physical Restraint Use Questionnaire. However, gaps exist in its internal structure and measurement invariance across different groups of respondents. Cross-sectional multicentre survey. Data were collected from nurses working in eight Spanish hospitals and 19 nursing homes. All registered nurses and nurse assistants (N = 3,838) were contacted, of whom 1,635 agreed to participate. Confirmatory factor analysis was performed to determine internal structure and measurement invariance of Physical Restraint Use Questionnaire, after which scale scores and other measures of experience and training were compared between hospital-based (n = 855) and nursing homes-based (n = 780) nurses. The Physical Restraint Use Questionnaire showed three invariant factors across type of facility, and also professional category and sex. Nursing staff working in both types of facility scored similarly; prevention of therapy disruption and prevention of falls were rated more important. Nurses working in nursing homes reported using restraint "many times" more frequently (52.9% vs. 38.6%), less severe lack of training (18.2% vs. 58.7%) being perceived as more adequate (33.4% vs. 17.7%), than hospital-based nurses. These findings support Physical Restraint Use Questionnaire as a valid and reliable tool for assessing the importance given to the use of physical restraint in the older people by nursing professionals, regardless of the setting being studied. The information would help design more specifically the physical restraint training of nursing staff and to plan institutional interventions aimed at reducing its use. © 2018 John Wiley & Sons Ltd.

Static internal pressure capacity of Hanford Single-Shell Waste Tanks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Julyk, L.J.

1994-07-19

Underground single-shell waste storage tanks located at the Hanford Site in Richland, Washington, generate gaseous mixtures that could be ignited, challenging the structural integrity of the tanks. The structural capacity of the single-shell tanks to internal pressure is estimated through nonlinear finite-element structural analyses of the reinforced concrete tank. To determine their internal pressure capacity, designs for both the million-gallon and the half-million-gallon tank are evaluated on the basis of gross structural instability.

Grand canonical validation of the bipartite international trade network.

PubMed

Straka, Mika J; Caldarelli, Guido; Saracco, Fabio

2017-08-01

Devising strategies for economic development in a globally competitive landscape requires a solid and unbiased understanding of countries' technological advancements and similarities among export products. Both can be addressed through the bipartite representation of the International Trade Network. In this paper, we apply the recently proposed grand canonical projection algorithm to uncover country and product communities. Contrary to past endeavors, our methodology, based on information theory, creates monopartite projections in an unbiased and analytically tractable way. Single links between countries or products represent statistically significant signals, which are not accounted for by null models such as the bipartite configuration model. We find stable country communities reflecting the socioeconomic distinction in developed, newly industrialized, and developing countries. Furthermore, we observe product clusters based on the aforementioned country groups. Our analysis reveals the existence of a complicated structure in the bipartite International Trade Network: apart from the diversification of export baskets from the most basic to the most exclusive products, we observe a statistically significant signal of an export specialization mechanism towards more sophisticated products.

Grand canonical validation of the bipartite international trade network

NASA Astrophysics Data System (ADS)

Straka, Mika J.; Caldarelli, Guido; Saracco, Fabio

2017-08-01

Devising strategies for economic development in a globally competitive landscape requires a solid and unbiased understanding of countries' technological advancements and similarities among export products. Both can be addressed through the bipartite representation of the International Trade Network. In this paper, we apply the recently proposed grand canonical projection algorithm to uncover country and product communities. Contrary to past endeavors, our methodology, based on information theory, creates monopartite projections in an unbiased and analytically tractable way. Single links between countries or products represent statistically significant signals, which are not accounted for by null models such as the bipartite configuration model. We find stable country communities reflecting the socioeconomic distinction in developed, newly industrialized, and developing countries. Furthermore, we observe product clusters based on the aforementioned country groups. Our analysis reveals the existence of a complicated structure in the bipartite International Trade Network: apart from the diversification of export baskets from the most basic to the most exclusive products, we observe a statistically significant signal of an export specialization mechanism towards more sophisticated products.

Geo-located Twitter as proxy for global mobility patterns.

PubMed

Hawelka, Bartosz; Sitko, Izabela; Beinat, Euro; Sobolevsky, Stanislav; Kazakopoulos, Pavlos; Ratti, Carlo

2014-05-27

Pervasive presence of location-sharing services made it possible for researchers to gain an unprecedented access to the direct records of human activity in space and time. This article analyses geo-located Twitter messages in order to uncover global patterns of human mobility. Based on a dataset of almost a billion tweets recorded in 2012, we estimate the volume of international travelers by country of residence. Mobility profiles of different nations were examined based on such characteristics as mobility rate, radius of gyration, diversity of destinations, and inflow-outflow balance. Temporal patterns disclose the universally valid seasons of increased international mobility and the particular character of international travels of different nations. Our analysis of the community structure of the Twitter mobility network reveals spatially cohesive regions that follow the regional division of the world. We validate our result using global tourism statistics and mobility models provided by other authors and argue that Twitter is exceptionally useful for understanding and quantifying global mobility patterns.

Constraining the volatile fraction of planets from transit observations

NASA Astrophysics Data System (ADS)

Alibert, Y.

2016-06-01

Context. The determination of the abundance of volatiles in extrasolar planets is very important as it can provide constraints on transport in protoplanetary disks and on the formation location of planets. However, constraining the internal structure of low-mass planets from transit measurements is known to be a degenerate problem. Aims: Using planetary structure and evolution models, we show how observations of transiting planets can be used to constrain their internal composition, in particular the amount of volatiles in the planetary interior, and consequently the amount of gas (defined in this paper to be only H and He) that the planet harbors. We first explore planets that are located close enough to their star to have lost their gas envelope. We then concentrate on planets at larger distances and show that the observation of transiting planets at different evolutionary ages can provide statistical information on their internal composition, in particular on their volatile fraction. Methods: We computed the evolution of low-mass planets (super-Earths to Neptune-like) for different fractions of volatiles and gas. We used a four-layer model (core, silicate mantle, icy mantle, and gas envelope) and computed the internal structure of planets for different luminosities. With this internal structure model, we computed the internal and gravitational energy of planets, which was then used to derive the time evolution of the planet. Since the total energy of a planet depends on its heat capacity and density distribution and therefore on its composition, planets with different ice fractions have different evolution tracks. Results: We show for low-mass gas-poor planets that are located close to their central star that assuming evaporation has efficiently removed the entire gas envelope, it is possible to constrain the volatile fraction of close-in transiting planets. We illustrate this method on the example of 55 Cnc e and show that under the assumption of the absence of gas, the measured mass and radius imply at least 20% of volatiles in the interior. For planets at larger distances, we show that the observation of transiting planets at different evolutionary ages can be used to set statistical constraints on the volatile content of planets. Conclusions: These results can be used in the context of future missions like PLATO to better understand the internal composition of planets, and based on this, their formation process and potential habitability.

Finite Element Modeling of the NASA Langley Aluminum Testbed Cylinder

NASA Technical Reports Server (NTRS)

Grosveld, Ferdinand W.; Pritchard, Joselyn I.; Buehrle, Ralph D.; Pappa, Richard S.

2002-01-01

The NASA Langley Aluminum Testbed Cylinder (ATC) was designed to serve as a universal structure for evaluating structural acoustic codes, modeling techniques and optimization methods used in the prediction of aircraft interior noise. Finite element models were developed for the components of the ATC based on the geometric, structural and material properties of the physical test structure. Numerically predicted modal frequencies for the longitudinal stringer, ring frame and dome component models, and six assembled ATC configurations were compared with experimental modal survey data. The finite element models were updated and refined, using physical parameters, to increase correlation with the measured modal data. Excellent agreement, within an average 1.5% to 2.9%, was obtained between the predicted and measured modal frequencies of the stringer, frame and dome components. The predictions for the modal frequencies of the assembled component Configurations I through V were within an average 2.9% and 9.1%. Finite element modal analyses were performed for comparison with 3 psi and 6 psi internal pressurization conditions in Configuration VI. The modal frequencies were predicted by applying differential stiffness to the elements with pressure loading and creating reduced matrices for beam elements with offsets inside external superelements. The average disagreement between the measured and predicted differences for the 0 psi and 6 psi internal pressure conditions was less than 0.5%. Comparably good agreement was obtained for the differences between the 0 psi and 3 psi measured and predicted internal pressure conditions.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Podoskin, A. A., E-mail: podoskin@mail.ioffe.ru; Shashkin, I. S.; Slipchenko, S. O.

A model describing the operation of a completely optical cell, based on the competition of lasing of Fabry-Perot cavity modes and the high-Q closed mode in high-power semiconductor lasers is proposed. Based on rate equations, the conditions of lasing switching between Fabry-Perot modes for ground and excited lasing levels and the closed mode are considered in the case of increasing internal optical loss under conditions of high current pump levels. The optical-cell operation conditions in the mode of a high-power laser radiation switch (reversible mode-structure switching) and in the mode of a memory cell with bistable irreversible lasing switching betweenmore » mode structures with various Q-factors are considered.« less

Clinical profiles of stigma experiences, self-esteem and social relationships among people with schizophrenia, depressive, and bipolar disorders.

PubMed

Oliveira, Sandra E H; Esteves, Francisco; Carvalho, Helena

2015-09-30

Some mental illnesses and certain mental health care environments can be severely stigmatizing, which seems to be related to decreased self-esteem and a deterioration of the quality of social relationships for people with mental illness. This study aims to identify clinical profiles characterized by clinical diagnoses more strongly associated with the treatment settings and related to internalized stigma, self-esteem and satisfaction with social relationships. It also aimed to analyze associations between clinical profiles and socio-demographic indicators. Multiple correspondence analysis and cluster analysis were performed on a sample of 261 individuals with schizophrenia and mood disorders, from hospital-based and community-based facilities. MCA showed four distinct clinical profiles allowing a differentiation among levels of: internalized stigma, social relationship satisfaction and self-esteem. Overall, results revealed that internalized stigma remains a pervasive problem for some people with schizophrenia and mood disorders. Particularly, internalized stigma and social relationships dissatisfaction and associated socio-demographic indicators appear to be a risk factor for social isolation for individuals with schizophrenia, which may worsen the course of the disorder. Our findings highlight the importance to develop structured interventions aimed to reduce internalized stigma, and exclusion of those who suffer the loss of their social roles and networks. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Processes and experiences of Portugal's international recruitment scheme of Colombian physicians: Did it work?

PubMed

Masanet, Erika

2017-08-01

The Portuguese Ministry of Health performed five international recruitment rounds of Latin American physicians due to the need for physicians in certain geographic areas of the country and in some specialties, as a temporary solution to shortages. Among these recruitments is that of Colombian physicians in 2011 that was the largest of the five groups. This paper presents an evaluation of the international recruitment procedure of Colombian physicians based on the criteria of procedural outcomes and health system outcomes. The methodology used is qualitative, based on semi-structured interviews with key informants and Colombian physicians recruited in Portugal and also on documentary analysis of secondary sources. International recruitment of Colombian physicians coincided with a period of political change and severe economic crisis in Portugal that caused some problems in the course of this recruitment, mainly family reunification in the later group of Colombian physicians and non-compliance of the salary originally agreed upon. Furthermore, due to the continuous resignations of Colombian physicians throughout the 3-year contract, procedural outcomes and health system outcomes of this international recruitment were not fulfilled and therefore the expected results to meet the temporary needs for medical personnel in some areas of the country were not accomplished. Copyright © 2017 Elsevier B.V. All rights reserved.

Catalytic allylic oxidation of internal alkenes to a multifunctional chiral building block

NASA Astrophysics Data System (ADS)

Bayeh, Liela; Le, Phong Q.; Tambar, Uttam K.

2017-07-01

The stereoselective oxidation of hydrocarbons is one of the most notable advances in synthetic chemistry over the past fifty years. Inspired by nature, enantioselective dihydroxylations, epoxidations and other oxidations of unsaturated hydrocarbons have been developed. More recently, the catalytic enantioselective allylic carbon-hydrogen oxidation of alkenes has streamlined the production of pharmaceuticals, natural products, fine chemicals and other functional materials. Allylic functionalization provides a direct path to chiral building blocks with a newly formed stereocentre from petrochemical feedstocks while preserving the olefin functionality as a handle for further chemical elaboration. Various metal-based catalysts have been discovered for the enantioselective allylic carbon-hydrogen oxidation of simple alkenes with cyclic or terminal double bonds. However, a general and selective allylic oxidation using the more common internal alkenes remains elusive. Here we report the enantioselective, regioselective and E/Z-selective allylic oxidation of unactivated internal alkenes via a catalytic hetero-ene reaction with a chalcogen-based oxidant. Our method enables non-symmetric internal alkenes to be selectively converted into allylic functionalized products with high stereoselectivity and regioselectivity. Stereospecific transformations of the resulting multifunctional chiral building blocks highlight the potential for rapidly converting internal alkenes into a broad range of enantioenriched structures that can be used in the synthesis of complex target molecules.

Adaptive Modeling, Engineering Analysis and Design of Advanced Aerospace Vehicles

NASA Technical Reports Server (NTRS)

Mukhopadhyay, Vivek; Hsu, Su-Yuen; Mason, Brian H.; Hicks, Mike D.; Jones, William T.; Sleight, David W.; Chun, Julio; Spangler, Jan L.; Kamhawi, Hilmi; Dahl, Jorgen L.

2006-01-01

This paper describes initial progress towards the development and enhancement of a set of software tools for rapid adaptive modeling, and conceptual design of advanced aerospace vehicle concepts. With demanding structural and aerodynamic performance requirements, these high fidelity geometry based modeling tools are essential for rapid and accurate engineering analysis at the early concept development stage. This adaptive modeling tool was used for generating vehicle parametric geometry, outer mold line and detailed internal structural layout of wing, fuselage, skin, spars, ribs, control surfaces, frames, bulkheads, floors, etc., that facilitated rapid finite element analysis, sizing study and weight optimization. The high quality outer mold line enabled rapid aerodynamic analysis in order to provide reliable design data at critical flight conditions. Example application for structural design of a conventional aircraft and a high altitude long endurance vehicle configuration are presented. This work was performed under the Conceptual Design Shop sub-project within the Efficient Aerodynamic Shape and Integration project, under the former Vehicle Systems Program. The project objective was to design and assess unconventional atmospheric vehicle concepts efficiently and confidently. The implementation may also dramatically facilitate physics-based systems analysis for the NASA Fundamental Aeronautics Mission. In addition to providing technology for design and development of unconventional aircraft, the techniques for generation of accurate geometry and internal sub-structure and the automated interface with the high fidelity analysis codes could also be applied towards the design of vehicles for the NASA Exploration and Space Science Mission projects.

Internalized stigma and quality of life domains among people with mental illness: the mediating role of self-esteem.

PubMed

Oliveira, Sandra E H; Carvalho, Helena; Esteves, Francisco

2016-01-01

People with mental illness who internalize stigma often experience reduced self-esteem and impaired quality of life (QOL). To propose a theoretical model in which self-esteem mediates the effects of internalized stigma on the multidimensional domains comprising QOL. In 403 inpatients and outpatients (DSM-IV, American Psychiatric Association, 1994), from hospital-based and community mental health facilities, self-report measures of internalized stigma (ISMI), self-esteem (RSES) and QOL (WHOQOL-Bref) were administrated. Structural equation modeling results supported the proposed model. Self-esteem fully mediated the relation between internalized stigma and the physical and the social relationships domains, and partially mediated the relationship between internalized stigma and psychological, environment and level of independence QOL domains. Such results provided empirical support and shed light upon previous research. Specifically the results emphasize the mediating role that self-esteem plays in the degree to which internalized stigma exerts a negative effect on specific QOL domains. Self-esteem appears to be a core element in reducing the negative effects of internalized stigma on aspects of QOL among people with mental illness. These findings suggest there is a crucial impact regarding clinical mental health interventions along with important theoretical implications.

10,000 - A reason to study granular heat convection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Einav, I.; Rognon, P.; Gan, Y.

2013-06-18

In sheared granular media, particle motion is characterized by vortex-like structures; here this is demonstrated experimentally for disks system undergoing indefinite deformation during simple shear, as often imposed by the rock masses hosting earthquake fault gouges. In traditional fluids it has been known for years that vortices represent a major factor of heat transfer enhancement via convective internal mixing, but in analyses of heat transfer through earthquake faults and base planes of landslides this has been continuously neglected. Can research proceed by neglecting heat convection by internal mixing? Our answer is astonishingly far from being yes.

Optical Control of Internal Electric Fields in Band Gap-Graded InGaN Nanowires

NASA Astrophysics Data System (ADS)

Erhard, N.; Sarwar, A. T. M. Golam; Yang, F.; McComb, D. W.; Myers, R. C.; Holleitner, A. W.

2015-01-01

InGaN nanowires are suitable building blocks for many future optoelectronic devices. We show that a linear grading of the indium content along the nanowire axis from GaN to InN introduces an internal electric field evoking a photocurrent. Consistent with quantitative band structure simulations we observe a sign change in the measured photocurrent as a function of photon flux. This negative differential photocurrent opens the path to a new type of nanowire-based photodetector. We demonstrate that the photocurrent response of the nanowires is as fast as 1.5 ps.

Unfolding and folding internal friction of β-hairpins is smaller than that of α-helices.

PubMed

Schulz, Julius C F; Miettinen, Markus S; Netz, R R

2015-04-02

By the forced unfolding of polyglutamine and polyalanine homopeptides in competing α-helix and β-hairpin secondary structures, we disentangle equilibrium free energetics from nonequilibrium dissipative effects. We find that α-helices are characterized by larger friction or dissipation upon unfolding, regardless of whether they are free energetically preferred over β-hairpins or not. Our analysis, based on MD simulations for atomistic peptide models with explicit water, suggests that this difference is related to the internal friction and mostly caused by the different number of intrapeptide hydrogen bonds in the α-helix and β-hairpin states.

Surface and Internal Structure of Pristine Presolar Silicon Carbide

NASA Astrophysics Data System (ADS)

Stroud, R. M.; Bernatowicz, T. J.

2005-03-01

We report results from transmission electron microcopy studies of the surface and internal structure of two pristine presolar SiC grains, including definitive evidence of an oxide rim on one grain, and the presence of internal TiC and AlN grains.

Developing leading indicators from OHS management audit data: Determining the measurement properties of audit data from the field.

PubMed

Robson, Lynda S; Ibrahim, Selahadin; Hogg-Johnson, Sheilah; Steenstra, Ivan A; Van Eerd, Dwayne; Amick, Benjamin C

2017-06-01

OHS management audits are one means of obtaining data that may serve as leading indicators. The measurement properties of such data are therefore important. This study used data from Workwell audit program in Ontario, a Canadian province. The audit instrument consisted of 122 items related to 17 OHS management elements. The study sought answers regarding (a) the ability of audit-based scores to predict workers' compensation claims outcomes, (b) structural characteristics of the data in relation to the organization of the audit instrument, and (c) internal consistency of items within audit elements. The sample consisted of audit and claims data from 1240 unique firms that had completed one or two OHS management audits during 2007-2010. Predictors derived from the audit results were used in multivariable negative binomial regression modeling of workers' compensation claims outcomes. Confirmatory factor analyses were used to examine the instrument's structural characteristics. Kuder-Richardson coefficients of internal consistency were calculated for each audit element. The ability of audit scores to predict subsequent claims data could not be established. Factor analysis supported the audit instrument's element-based structure. KR-20 values were high (≥0.83). The Workwell audit data display structural validity and high internal consistency, but not, to date, construct validity, since the audit scores are generally not predictive of subsequent firm claim experience. Audit scores should not be treated as leading indicators of workplace OHS performance without supporting empirical data. Analyses of the measurement properties of audit data can inform decisionmakers about the operation of an audit program, possible future directions in audit instrument development, and the appropriate use of audit data. In particular, decision-makers should be cautious in their use of audit scores as leading indicators, in the absence of supporting empirical data. Copyright © 2017 Elsevier Ltd and National Safety Council. All rights reserved.

Characterizing the interior of 67P in the vicinity of Abydos

NASA Astrophysics Data System (ADS)

Ciarletti, V.; Lasue, J.; Lemonnier, F.; Herique, A.; Kofman, W. W.; Guiffaut, C.; Levasseur-Regourd, A. C.; Plettemeier, D.

2016-12-01

Since the arrival of Rosetta at comet 67P, numerous pictures have been delivered by the cameras onboard both the main spacecraft and the Philae lander. They revealed, at the nucleus' surface and inside the walls of the deep pits, few-meters scale repeating structures, thus providing hints about the internal structure of the nucleus, and suggesting that primordial 'cometesimals' may be objects around 3m in size. The CONSERT (Comet Nucleus Sounding Experiment by Radiowave Transmission) experiment is a radar that has been designed to specifically sound the interior of the nucleus and to provide information on the nucleus internal structure. The work presented here is based on the CONSERT data collected during the First Science Sequence (FSS) and marginally during Philae's Separation Descent and Landing (SDL) for comparison. During FFS, the smaller lobe of the nucleus in the vicinity of Abydos has been actually sounded by CONSERT's electromagnetic waves at 90 MHz with a spatial resolution around 10 m. The propagation delays measured during FSS are consistent with a very low bulk permittivity value for the investigated cometary material, which confirms the high porosity of the nucleus. The sharp shape of the received pulses indicates that the electromagnetic waves suffered weak scattering when propagating through the nucleus. This suggests that the sounded part nucleus is thus fairly homogeneous on a spatial scale of tens of meters. We will present further results on the variation of the CONSERT's pulse shape transmitted through the small lobe of the nucleus. For a more accurate analysis and interpretation of the data, we split the FSS data into two distinct sets corresponding to soundings performed West and East of Philae in order to investigate potential differences. Tentative interpretation in terms of nucleus internal structure based on propagation simulations performed in non-homogeneous nucleus numerical models will be presented.

International Space Station Model Correlation Analysis

NASA Technical Reports Server (NTRS)

Laible, Michael R.; Fitzpatrick, Kristin; Hodge, Jennifer; Grygier, Michael

2018-01-01

This paper summarizes the on-orbit structural dynamic data and the related modal analysis, model validation and correlation performed for the International Space Station (ISS) configuration ISS Stage ULF7, 2015 Dedicated Thruster Firing (DTF). The objective of this analysis is to validate and correlate the analytical models used to calculate the ISS internal dynamic loads and compare the 2015 DTF with previous tests. During the ISS configurations under consideration, on-orbit dynamic measurements were collected using the three main ISS instrumentation systems; Internal Wireless Instrumentation System (IWIS), External Wireless Instrumentation System (EWIS) and the Structural Dynamic Measurement System (SDMS). The measurements were recorded during several nominal on-orbit DTF tests on August 18, 2015. Experimental modal analyses were performed on the measured data to extract modal parameters including frequency, damping, and mode shape information. Correlation and comparisons between test and analytical frequencies and mode shapes were performed to assess the accuracy of the analytical models for the configurations under consideration. These mode shapes were also compared to earlier tests. Based on the frequency comparisons, the accuracy of the mathematical models is assessed and model refinement recommendations are given. In particular, results of the first fundamental mode will be discussed, nonlinear results will be shown, and accelerometer placement will be assessed.

International development and psychometric properties of the Child and Adolescent Trauma Screen (CATS).

PubMed

Sachser, Cedric; Berliner, Lucy; Holt, Tonje; Jensen, Tine K; Jungbluth, Nathaniel; Risch, Elizabeth; Rosner, Rita; Goldbeck, Lutz

2017-03-01

Systematic screening is a powerful means by which children and adolescents with posttraumatic stress symptoms (PTSS) can be detected. Reliable and valid measures based on current diagnostic criteria are needed. To investigate the internal consistency and construct validity of the Child and Adolescent Trauma Screen (CATS) in three samples of trauma-exposed children in the US (self-reports: n=249; caregiver reports: n=267; pre-school n=190), in Germany (self-reports: n=117; caregiver reports: n=95) and in Norway (self-reports: n=109; caregiver reports: n=62). Internal consistency was calculated using Cronbach's α. Convergent-discriminant validity was investigated using bivariate correlation coefficients with measures of depression, anxiety and externalizing symptoms. CFA was used to investigate the DSM-5 factor structure. In all three language samples the 20 item symptom score of the self-report and the caregiver report proved good to excellent reliability with α ranging between .88 and .94. The convergent-discriminant validity pattern showed medium to strong correlations with measures of depression (r =.62-.82) and anxiety (r =.40-.77) and low to medium correlations with externalizing symptoms (r =-.15-.43) within informants in all language versions. Using CFA the underlying DSM-5 factor structure with four symptom clusters (re-experiencing, avoidance, negative alterations in mood and cognitions, hyperarousal) was supported (n =475 for self-report; n =424 for caregiver reports). The external validation of the CATS with a DSM-5 based semi-structured clinical interview and corresponding determination of cut-points is pending. The CATS has satisfactory psychometric properties. Clinicians may consider the CATS as a screening tool and for symptom monitoring. Copyright © 2016 Elsevier B.V. All rights reserved.

[Master trainer concept "structured specialist further education" : A joint project of the German Professional Associations of Internal Medicine, Surgeons and Orthopedic/Trauma Surgeons].

PubMed

Siebolds, M; Ansorg, J; Dittmar, R; Hennes, N; Radau, T; Ruff, S; Denkinger, M D

2017-10-01

The quality requirements in the practice of postgradual medical further education below the normal level of the further education regulations is a barely developed scientific field in Germany. A systematic use of internationally accepted scientific evidence barely exists. This research and development project was initiated in 2001 in order to be able to implement a practical but evidence-based model compatible with the existing structure of postgradual medical education. This project has been supported since 2013 by the Professional Associations of Internal Medicine (BDI), Surgeons (BDC) and Orthopedic and Trauma surgeons (BVOU). The development phase of this complex intervention was based on three stages involving stakeholder interviews from relevant groups, the identification of a theoretical model for the construction and systematic literature reviews to identify the relevant evidence. The basic model for structured specialist further education developed included the creation and implementation of a simple core curriculum for every department, a tool for systematic feedback within the framework of the annual further education interviews and a simple clinical assessment to evaluate the actual clinical performance of physicians in further education. A pilot test of this model was carried out in 150 specialist departments in Germany and continually developed. The project shows that such a program can be systematically developed and pilot studies can be carried out. The central problems in implementation involve the traditional informal further education culture, which as a rule does not implement a systematic elicitation of the state of learning continuously distributed over the whole period of further education and the practical testing of competence development.

A Comprehensive Approach to Convert a Radiology Department From Coding Based on International Classification of Diseases, Ninth Revision, to Coding Based on International Classification of Diseases, Tenth Revision.

PubMed

McBee, Morgan P; Laor, Tal; Pryor, Rebecca M; Smith, Rachel; Hardin, Judy; Ulland, Lisa; May, Sally; Zhang, Bin; Towbin, Alexander J

2018-02-01

The purpose of this study was to adapt our radiology reports to provide the documentation required for specific International Classification of Diseases, tenth rev (ICD-10) diagnosis coding. Baseline data were analyzed to identify the reports with the greatest number of unspecified ICD-10 codes assigned by computer-assisted coding software. A two-part quality improvement initiative was subsequently implemented. The first component involved improving clinical histories by utilizing technologists to obtain information directly from the patients or caregivers, which was then imported into the radiologist's report within the speech recognition software. The second component involved standardization of report terminology and creation of four different structured report templates to determine which yielded the fewest reports with an unspecified ICD-10 code assigned by an automated coding engine. In all, 12,077 reports were included in the baseline analysis. Of these, 5,151 (43%) had an unspecified ICD-10 code. The majority of deficient reports were for radiographs (n = 3,197; 62%). Inadequacies included insufficient clinical history provided and lack of detailed fracture descriptions. Therefore, the focus was standardizing terminology and testing different structured reports for radiographs obtained for fractures. At baseline, 58% of radiography reports contained a complete clinical history with improvement to >95% 8 months later. The total number of reports that contained an unspecified ICD-10 code improved from 43% at baseline to 27% at completion of this study (P < .0001). The number of radiology studies with a specific ICD-10 code can be improved through quality improvement methodology, specifically through the use of technologist-acquired clinical histories and structured reporting. Copyright © 2017 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Lactose-modified DNA tile nanostructures as drug carriers.

PubMed

Akkus Sut, Pinar; Tunc, Cansu Umran; Culha, Mustafa

2016-09-01

DNA hybridization allows the preparation of nanoscale DNA structures with desired shape and size. DNA structures using simple base pairing can be used for the delivery of drug molecules into the cells. Since DNA carries multiple negative charges, their cellular uptake efficiency is low. Thus, the modification of the DNA structures with molecules that may enhance the cellular internalization may be an option. The objective of this study is to construct DNA-based nanocarrier system and to investigate the cellular uptake of DNA tile with/without lactose modification. Doxorubicin was intercalated to DNA tile and cellular uptake of drug-loaded DNA-based carrier with/without lactose modification was investigated in vitro. HeLa, BT-474, and MDA-MB-231 cancer cells were used for cellular uptake studies and cytotoxicity assays. Using fluorescence spectroscopy, flow cytometry, and confocal microscopy, cellular uptake behavior of DNA tile was investigated. The cytotoxicity of DNA tile structures was determined with WST-1 assay. The results show that modification with lactose effectively increases the intracellular uptake of doxorubicin loaded DNA tile structure by cancer cells compared with the unmodified DNA tile. The findings of this study suggest that DNA-based nanostructures modified with carbohydrates can be used as suitable multifunctional nanocarriers with simple chemical modifications.

International migration from non-endemic settings as a protective factor for HIV/STI risk among female sex workers in Vancouver, Canada.

PubMed

Goldenberg, Shira M; Liu, Vivian; Nguyen, Paul; Chettiar, Jill; Shannon, Kate

2015-02-01

Given heterogeneous evidence regarding the impacts of migration on HIV/sexually transmitted infections (STIs) among female sex workers (FSWs), we explored factors associated with international migration among FSWs in Vancouver, Canada. We draw on baseline questionnaire and HIV/STI testing data from a community-based cohort, AESHA, from 2010-2012. Logistic regression identified correlates of international migration. Of 650 FSWs, 163 (25.1%) were international migrants, who primarily worked in formal indoor establishments. HIV/STI prevalence was lower among migrants than Canadian-born women (5.5 vs. 25.9%). In multivariate analysis, international migration was positively associated with completing high school, supporting dependents, and paying a third party, and negatively associated with HIV, injecting drugs and inconsistent condom use with clients. Although migrants experience lower workplace harms and HIV risk than Canadian-born women, they face concerning levels of violence, police harassment, and HIV/STIs. Research exploring structural and socio-cultural factors shaping risk mitigation and migrants' access to support remains needed.

A curved RNA helix incorporating an internal loop with G·A and A·A non-Watson–Crick base pairing

PubMed Central

Baeyens, Katrien J.; De Bondt, Hendrik L.; Pardi, Arthur; Holbrook, Stephen R.

1996-01-01

The crystal structure of the RNA dodecamer 5′-GGCC(GAAA)GGCC-3′ has been determined from x-ray diffraction data to 2.3-Å resolution. In the crystal, these oligomers form double helices around twofold symmetry axes. Four consecutive non-Watson–Crick base pairs make up an internal loop in the middle of the duplex, including sheared G·A pairs and novel asymmetric A·A pairs. This internal loop sequence produces a significant curvature and narrowing of the double helix. The helix is curved by 34° from end to end and the diameter is narrowed by 24% in the internal loop. A Mn2+ ion is bound directly to the N7 of the first guanine in the Watson–Crick region following the internal loop and the phosphate of the preceding residue. This Mn2+ location corresponds to a metal binding site observed in the hammerhead catalytic RNA. PMID:8917508

Measurement of total acid number (TAN) and TAN boiling point distribution in petroleum products by electrospray ionization mass spectrometry.

PubMed

Qian, Kuangnan; Edwards, Kathleen E; Dechert, Gary J; Jaffe, Stephen B; Green, Larry A; Olmstead, William N

2008-02-01

We report a new method for rapid measurement of total acid number (TAN) and TAN boiling point (BP) distribution for petroleum crude and products. The technology is based on negative ion electrospray ionization mass spectrometry (ESI-MS) for selective ionization of petroleum acid and quantification of acid structures and molecular weight distributions. A chip-based nanoelectrospray system enables microscale (<200 mg) and higher throughput (20 samples/h) measurement. Naphthenic acid structures were assigned based on nominal masses of a set of predefined acid structures. Stearic acid is used as an internal standard to calibrate ESI-MS response factors for quantification purposes. With the use of structure-property correlations, boiling point distributions of TAN values can be calculated from the composition. The rapid measurement of TAN BP distributions by ESI is demonstrated for a series of high-TAN crudes and distillation cuts. TAN values determined by the technique agree well with those by the titration method. The distributed properties compare favorably with those measured by distillation and measurement of TAN of corresponding cuts.

Advanced seismic imaging of overdeepened alpine valleys

NASA Astrophysics Data System (ADS)

Burschil, Thomas; Buness, Hermann; Tanner, David; Gabriel, Gerald; Krawczyk, Charlotte M.

2017-04-01

Major European alpine valleys and basins are densely populated areas with infrastructure of international importance. To protect the environment by, e.g., geohazard assessment or groundwater estimation, understanding of the geological structure of these valleys is essential. The shape and deposits of a valley can clarify its genesis and allows a prediction of behaviour in future glaciations. The term "overdeepened" refers to valleys and basins, in which pressurized melt-water under the glacier erodes the valley below the fluvial level. Most overdeepened valleys or basins were thus refilled during the ice melt or remain in the form of lakes. The ICDP-project Drilling Overdeepened Alpine Valleys (DOVE) intends to correlate the sedimentary succession from boreholes between valleys in the entire alpine range. Hereby, seismic exploration is essential to predict the most promising well path and drilling site. In a first step, this DFG-funded project investigates the benefit of multi-component techniques for seismic imaging. At two test sites, the Tannwald Basin and the Lienz Basin, the Leibniz Institute for Applied Geophysics acquired P-wave reflection profiles to gain structural and facies information. Built on the P-wave information, several S-wave reflection profiles were acquired in the pure SH-wave domain as well as 6-C reflection profiles using a horizontal S-wave source in inline and crossline excitation and 3-C receivers. Five P-wave sections reveal the structure of the Tannwald Basin, which is a distal branch basin of the Rhine Glacier. Strong reflections mark the base of the basin, which has a maximum depth of 240 metres. Internal structures and facies vary strongly and spatially, but allow a seismic facies characterization. We distinguish lacustrine, glacio-fluvial, and deltaic deposits, which make up the fill of the Tannwald Basin. Elements of the SH-wave and 6-C seismic imaging correlate with major structures in the P-wave image, but vary in detail. Based on the interpretation, two possible drilling sites are suggested for DOVE that will also prove the seismic interpretation and explain differences in P- and S-wave imaging. First results for the intermountain Lienz Basin are available from four parallel P-wave sections which show the asymmetric basin shape. The sedimentary base is well imaged down to ca. 0.6 km depth, and internal reflectors point to a diverse fill. Here, S-wave imaging produces less distinct sections and requires more sophisticated processing. In summary, P-wave imaging is suitable to map overdeepened structures in the Alps while S-wave imaging can contribute additional information.

Large enhancement of light extraction efficiency in AlGaN-based nanorod ultraviolet light-emitting diode structures.

PubMed

Ryu, Han-Youl

2014-02-04

Light extraction efficiency (LEE) of AlGaN-based nanorod deep ultraviolet (UV) light-emitting diodes (LEDs) is numerically investigated using three-dimensional finite-difference time-domain simulations. LEE of deep UV LEDs is limited by strong light absorption in the p-GaN contact layer and total internal reflection. The nanorod structure is found to be quite effective in increasing LEE of deep UV LEDs especially for the transverse magnetic (TM) mode. In the nanorod LED, strong dependence of LEE on structural parameters such as the diameter of a nanorod and the p-GaN thickness is observed, which can be attributed to the formation of resonant modes inside the nanorod structure. Simulation results show that, when the structural parameters of the nanorod LED are optimized, LEE can be higher than 50% and 60% for the transverse electric (TE) and TM modes, respectively. The nanorod structure is expected to be a good candidate for the application to future high-efficiency deep UV LEDs. PACS: 41.20.Jb; 42.72.Bj; 85.60.Jb.

Large enhancement of light extraction efficiency in AlGaN-based nanorod ultraviolet light-emitting diode structures

PubMed Central

2014-01-01

Light extraction efficiency (LEE) of AlGaN-based nanorod deep ultraviolet (UV) light-emitting diodes (LEDs) is numerically investigated using three-dimensional finite-difference time-domain simulations. LEE of deep UV LEDs is limited by strong light absorption in the p-GaN contact layer and total internal reflection. The nanorod structure is found to be quite effective in increasing LEE of deep UV LEDs especially for the transverse magnetic (TM) mode. In the nanorod LED, strong dependence of LEE on structural parameters such as the diameter of a nanorod and the p-GaN thickness is observed, which can be attributed to the formation of resonant modes inside the nanorod structure. Simulation results show that, when the structural parameters of the nanorod LED are optimized, LEE can be higher than 50% and 60% for the transverse electric (TE) and TM modes, respectively. The nanorod structure is expected to be a good candidate for the application to future high-efficiency deep UV LEDs. PACS 41.20.Jb; 42.72.Bj; 85.60.Jb PMID:24495598

A compact Dopplergraph/magnetograph suitable for space-based measurements of solar oscillations and magnetic fields

NASA Technical Reports Server (NTRS)

Rhodes, E. J., Jr.; Cacciani, A.; Tomczyk, S.; Ulrich, R. K.; Blamont, J.; Howard, R. F.; Dumont, P.; Smith, E. J.

1984-01-01

A compact Dopplergraph/magnetograph placed in a continuous solar-viewing orbit will allow us to make major advancements in our understanding of solar internal structure and dynamics. An international program is currently being conducted at JPL and Mt. Wilson to develop such an instrument. By combining a unique magneto-optical resonance filter with CID and CCD cameras we have been able to obtain full- and partial-disk Dopplergrams and magnetograms. Time series of the velocity images are converted into k-omega power spectra which show clear- the solar nonradial p-mode oscilations. Magnetograms suitable for studying the long-term evolution of solar active regions have also been obtained with this instrument. A flight instrument based on this concept is being studied for possible inclusion in the SOHO mission.

A theoretical examination of the rights of nurses.

PubMed

Kangasniemi, Mari; Viitalähde, Kirsi; Porkka, Sanna

2010-09-01

Nurses' duties and patients' rights have been important foci in nursing. Nurses' rights legitimate the power and responsibility of the profession. There are few published articles on this subject in the nursing science literature. This article is a theoretical examination of nurses' rights that aims to structure (i.e. show the internal logic of) those that have been little studied. It is based on the philosophical literature and published research. Nurses' rights can be divided into: human and civil rights, rights based on health care legislation, professional rights, and earned rights. In this context, professional rights relate to nursing and also to tasks shared with other health care professions. Analyzing nurses' rights will help to promote these rights, improve nurses' position both nationally and internationally, and provide possibilities for enhancing patient care.

Turning limited experimental information into 3D models of RNA.

PubMed

Flores, Samuel Coulbourn; Altman, Russ B

2010-09-01

Our understanding of RNA functions in the cell is evolving rapidly. As for proteins, the detailed three-dimensional (3D) structure of RNA is often key to understanding its function. Although crystallography and nuclear magnetic resonance (NMR) can determine the atomic coordinates of some RNA structures, many 3D structures present technical challenges that make these methods difficult to apply. The great flexibility of RNA, its charged backbone, dearth of specific surface features, and propensity for kinetic traps all conspire with its long folding time, to challenge in silico methods for physics-based folding. On the other hand, base-pairing interactions (either in runs to form helices or isolated tertiary contacts) and motifs are often available from relatively low-cost experiments or informatics analyses. We present RNABuilder, a novel code that uses internal coordinate mechanics to satisfy user-specified base pairing and steric forces under chemical constraints. The code recapitulates the topology and characteristic L-shape of tRNA and obtains an accurate noncrystallographic structure of the Tetrahymena ribozyme P4/P6 domain. The algorithm scales nearly linearly with molecule size, opening the door to the modeling of significantly larger structures.

Structural studies of G protein-coupled receptors.

PubMed

Lu, Mengjie; Wu, Beili

2016-11-01

G protein-coupled receptors (GPCRs) comprise the largest membrane protein family. These receptors sense a variety of signaling molecules, activate multiple intracellular signal pathways, and act as the targets of over 40% of marketed drugs. Recent progress on GPCR structural studies provides invaluable insights into the structure-function relationship of the GPCR superfamily, deepening our understanding about the molecular mechanisms of GPCR signal transduction. Here, we review recent breakthroughs on GPCR structure determination and the structural features of GPCRs, and take the structures of chemokine receptor CCR5 and purinergic receptors P2Y 1 R and P2Y 12 R as examples to discuss the importance of GPCR structures on functional studies and drug discovery. In addition, we discuss the prospect of GPCR structure-based drug discovery. © 2016 IUBMB Life, 68(11):894-903, 2016. © 2016 International Union of Biochemistry and Molecular Biology.

IMGT/3Dstructure-DB and IMGT/StructuralQuery, a database and a tool for immunoglobulin, T cell receptor and MHC structural data

PubMed Central

Kaas, Quentin; Ruiz, Manuel; Lefranc, Marie-Paule

2004-01-01

IMGT/3Dstructure-DB and IMGT/Structural-Query are a novel 3D structure database and a new tool for immunological proteins. They are part of IMGT, the international ImMunoGenetics information system®, a high-quality integrated knowledge resource specializing in immunoglobulins (IG), T cell receptors (TR), major histocompatibility complex (MHC) and related proteins of the immune system (RPI) of human and other vertebrate species, which consists of databases, Web resources and interactive on-line tools. IMGT/3Dstructure-DB data are described according to the IMGT Scientific chart rules based on the IMGT-ONTOLOGY concepts. IMGT/3Dstructure-DB provides IMGT gene and allele identification of IG, TR and MHC proteins with known 3D structures, domain delimitations, amino acid positions according to the IMGT unique numbering and renumbered coordinate flat files. Moreover IMGT/3Dstructure-DB provides 2D graphical representations (or Collier de Perles) and results of contact analysis. The IMGT/StructuralQuery tool allows search of this database based on specific structural characteristics. IMGT/3Dstructure-DB and IMGT/StructuralQuery are freely available at http://imgt.cines.fr. PMID:14681396

A Novel and Freely Available Interactive 3d Model of the Internal Carotid Artery.

PubMed

Valera-Melé, Marc; Puigdellívol-Sánchez, Anna; Mavar-Haramija, Marija; Juanes-Méndez, Juan A; San-Román, Luis; de Notaris, Matteo; Prats-Galino, Alberto

2018-03-05

We describe a new and freely available 3D interactive model of the intracranial internal carotid artery (ICA) and the skull base that also allows to display and compare its main segment classifications. High-resolution 3D human angiography (isometric voxel's size 0.36 mm) and Computed Tomography angiography images were exported to Virtual Reality Modeling Language (VRML) format for processing in a 3D software platform and embedding in a 3D Portable Document Format (PDF) document that can be freely downloaded at http://diposit.ub.edu/dspace/handle/2445/112442 and runs under Acrobat Reader on Mac and Windows computers and Windows 10 tablets. The 3D-PDF allows for visualisation and interaction through JavaScript-based functions (including zoom, rotation, selective visualization and transparentation of structures or a predefined sequence view of the main segment classifications if desired). The ICA and its main branches and loops, the Gasserian ganglion, the petrolingual ligament and the proximal and distal dural rings within the skull base environment (anterior and posterior clinoid processes, silla turcica, ethmoid and sphenoid bones, orbital fossae) may be visualized from different perspectives. This interactive 3D-PDF provides virtual views of the ICA and becomes an innovative tool to improve the understanding of the neuroanatomy of the ICA and surrounding structures.

Currency co-movement and network correlation structure of foreign exchange market

NASA Astrophysics Data System (ADS)

Mai, Yong; Chen, Huan; Zou, Jun-Zhong; Li, Sai-Ping

2018-02-01

We study the correlations of exchange rate volatility in the global foreign exchange(FX) market based on complex network graphs. Correlation matrices (CM) and the theoretical information flow method (Infomap) are employed to analyze the modular structure of the global foreign exchange network. The analysis demonstrates that there exist currency modules in the network, which is consistent with the geographical nature of currencies. The European and the East Asian currency modules in the FX network are most significant. We introduce a measure of the impact of individual currency based on its partial correlations with other currencies. We further incorporate an impact elimination method to filter out the impact of core nodes and construct subnetworks after the removal of these core nodes. The result reveals that (i) the US Dollar has prominent global influence on the FX market while the Euro has great impact on European currencies; (ii) the East Asian currency module is more strongly correlated than the European currency module. The strong correlation is a result of the strong co-movement of currencies in the region. The co-movement of currencies is further used to study the formation of international monetary bloc and the result is in good agreement with the consideration based on international trade.

Informing clinical policy decision-making practices in ambulance services.

PubMed

Muecke, Sandy; Curac, Nada; Binks, Darryn

2013-12-01

This study aims to identify the processes and frameworks that support an evidence-based approach to clinical policy decision-making practices in ambulance services. This literature review focused on: (i) the setting (pre-hospital); and (ii) the process of evidence translation, for studies published after the year 2000. Searches of Medline, CINAHL and Google were undertaken. Reference lists of eligible publications were searched for relevant articles. A total of 954 articles were identified. Of these, 20 full text articles were assessed for eligibility and seven full text articles met the inclusion criteria. Three provided detailed descriptions of the evidence-based practice processes used to inform ambulance service protocol or guideline development or review. There is little published literature that describes the processes involved, and frameworks required, to inform clinical policy decision making within ambulance services. This review found that processes were iterative and involved collaborations across many internal and external stakeholders. In several jurisdictions, these were coordinated by a dedicated team. Success appears dependent on committed leadership and purposive human and structural resources. Although time consuming, structured processes have been developed in some jurisdictions to assist decision-making processes. Further insight is likely to be obtained from literature published by those from other disciplines. © 2013 The Authors. International Journal of Evidence-Based Healthcare © 2013 The Joanna Briggs Institute.

Competing Intramolecular vs. Intermolecular Hydrogen Bonds in Solution

PubMed Central

Nagy, Peter I.

2014-01-01

A hydrogen bond for a local-minimum-energy structure can be identified according to the definition of the International Union of Pure and Applied Chemistry (IUPAC recommendation 2011) or by finding a special bond critical point on the density map of the structure in the framework of the atoms-in-molecules theory. Nonetheless, a given structural conformation may be simply favored by electrostatic interactions. The present review surveys the in-solution competition of the conformations with intramolecular vs. intermolecular hydrogen bonds for different types of small organic molecules. In their most stable gas-phase structure, an intramolecular hydrogen bond is possible. In a protic solution, the intramolecular hydrogen bond may disrupt in favor of two solute-solvent intermolecular hydrogen bonds. The balance of the increased internal energy and the stabilizing effect of the solute-solvent interactions regulates the new conformer composition in the liquid phase. The review additionally considers the solvent effects on the stability of simple dimeric systems as revealed from molecular dynamics simulations or on the basis of the calculated potential of mean force curves. Finally, studies of the solvent effects on the type of the intermolecular hydrogen bond (neutral or ionic) in acid-base complexes have been surveyed. PMID:25353178

Enhancement of white light OLED efficiency by combining both internal and external light extraction structures

NASA Astrophysics Data System (ADS)

Kao, I.-Ling; Ku, Chun-Neng; Chen, Yi-Ping; Lin, Ding-Zheng

2012-09-01

We proposed an internal nanostructure with a high reflective index planarization layer to solve the optical loss due to the reflective index mismatch between ITO and glass substrate. In our experiments, we found the electrical property of OLED device was significantly influenced by the internal nanostructures without planarization layer. Moreover, the internal extraction structure (IES) is not necessarily beneficial for light extraction. Therefore, we proposed a new substrate combine both internal and external extraction structure (EES) to extract trapping light. We successfully developed a high refractive index (N 1.7) planarization material with flat surface (RMS roughness < 2 nm), and improved about 70% device efficiency compared to traditional glass substrate.

The development and exploratory analysis of the Back Pain Attitudes Questionnaire (Back-PAQ)

PubMed Central

Darlow, Ben; Perry, Meredith; Mathieson, Fiona; Stanley, James; Melloh, Markus; Marsh, Reginald; Baxter, G David; Dowell, Anthony

2014-01-01

Objectives To develop an instrument to assess attitudes and underlying beliefs about back pain, and subsequently investigate its internal consistency and underlying structures. Design The instrument was developed by a multidisciplinary team of clinicians and researchers based on analysis of qualitative interviews with people experiencing acute and chronic back pain. Exploratory analysis was conducted using data from a population-based cross-sectional survey. Setting Qualitative interviews with community-based participants and subsequent postal survey. Participants Instrument development informed by interviews with 12 participants with acute back pain and 11 participants with chronic back pain. Data for exploratory analysis collected from New Zealand residents and citizens aged 18 years and above. 1000 participants were randomly selected from the New Zealand Electoral Roll. 602 valid responses were received. Measures The 34-item Back Pain Attitudes Questionnaire (Back-PAQ) was developed. Internal consistency was evaluated by the Cronbach α coefficient. Exploratory analysis investigated the structure of the data using Principal Component Analysis. Results The 34-item long form of the scale had acceptable internal consistency (α=0.70; 95% CI 0.66 to 0.73). Exploratory analysis identified five two-item principal components which accounted for 74% of the variance in the reduced data set: ‘vulnerability of the back’; ‘relationship between back pain and injury’; ‘activity participation while experiencing back pain’; ‘prognosis of back pain’ and ‘psychological influences on recovery’. Internal consistency was acceptable for the reduced 10-item scale (α=0.61; 95% CI 0.56 to 0.66) and the identified components (α between 0.50 and 0.78). Conclusions The 34-item long form of the scale may be appropriate for use in future cross-sectional studies. The 10-item short form may be appropriate for use as a screening tool, or an outcome assessment instrument. Further testing of the 10-item Back-PAQ's construct validity, reliability, responsiveness to change and predictive ability needs to be conducted. PMID:24860003