Revisiting the contemporary sea-level budget on global and regional scales.

PubMed

Rietbroek, Roelof; Brunnabend, Sandra-Esther; Kusche, Jürgen; Schröter, Jens; Dahle, Christoph

2016-02-09

Dividing the sea-level budget into contributions from ice sheets and glaciers, the water cycle, steric expansion, and crustal movement is challenging, especially on regional scales. Here, Gravity Recovery And Climate Experiment (GRACE) gravity observations and sea-level anomalies from altimetry are used in a joint inversion, ensuring a consistent decomposition of the global and regional sea-level rise budget. Over the years 2002-2014, we find a global mean steric trend of 1.38 ± 0.16 mm/y, compared with a total trend of 2.74 ± 0.58 mm/y. This is significantly larger than steric trends derived from in situ temperature/salinity profiles and models which range from 0.66 ± 0.2 to 0.94 ± 0.1 mm/y. Mass contributions from ice sheets and glaciers (1.37 ± 0.09 mm/y, accelerating with 0.03 ± 0.02 mm/y(2)) are offset by a negative hydrological component (-0.29 ± 0.26 mm/y). The combined mass rate (1.08 ± 0.3 mm/y) is smaller than previous GRACE estimates (up to 2 mm/y), but it is consistent with the sum of individual contributions (ice sheets, glaciers, and hydrology) found in literature. The altimetric sea-level budget is closed by coestimating a remaining component of 0.22 ± 0.26 mm/y. Well above average sea-level rise is found regionally near the Philippines (14.7 ± 4.39 mm/y) and Indonesia (8.3 ± 4.7 mm/y) which is dominated by steric components (11.2 ± 3.58 mm/y and 6.4 ± 3.18 mm/y, respectively). In contrast, in the central and Eastern part of the Pacific, negative steric trends (down to -2.8 ± 1.53 mm/y) are detected. Significant regional components are found, up to 5.3 ± 2.6 mm/y in the northwest Atlantic, which are likely due to ocean bottom pressure variations.

Robotics Systems Joint Project Office (RSJPO) Interoperability Profiles (IOPS) 101

DTIC Science & Technology

2012-07-01

interoperability, although they are supported by some interoperability attributes  For example, stair climbing » Stair climbing is not something that...IOPs need to specify » However, the mobility & actuation related interoperable messages can be used to provide stair climbing » Also...interoperability can enable management of different poses or modes, one of which may be stair climbing R O B O T IC S Y S T E M S J P O L e a d e r s h i p

Analysis of the rectangular resonator with butterfly MMI coupler using SOI

NASA Astrophysics Data System (ADS)

Kim, Sun-Ho; Park, Jun-Hee; Kim, Eudum; Jeon, Su-Jin; Kim, Ji-Hoon; Choi, Young-Wan

2018-02-01

We propose a rectangular resonator sensor structure with butterfly MMI coupler using SOI. It consists of the rectangular resonator, total internal reflection (TIR) mirror, and the butterfly MMI coupler. The rectangular resonator is expected to be used as bio and chemical sensors because of the advantages of using MMI coupler and the absence of bending loss unlike ring resonators. The butterfly MMI coupler can miniaturize the device compared to conventional MMI by using a linear butterfly shape instead of a square in the MMI part. The width, height, and slab height of the rib type waveguide are designed to be 1.5 μm, 1.5 μm, and 0.9 μm, respectively. This structure is designed as a single mode. When designing a TIR mirror, we considered the Goos-Hänchen shift and critical angle. We designed 3:1 MMI coupler because rectangular resonator has no bending loss. The width of MMI is designed to be 4.5 μm and we optimize the length of the butterfly MMI coupler using finite-difference time-domain (FDTD) method for higher Q-factor. It has the equal performance with conventional MMI even though the length is reduced by 1/3. As a result of the simulation, Qfactor of rectangular resonator can be obtained as 7381.

Archive interoperability in the Virtual Observatory

NASA Astrophysics Data System (ADS)

Genova, Françoise

2003-02-01

Main goals of Virtual Observatory projects are to build interoperability between astronomical on-line services, observatory archives, databases and results published in journals, and to develop tools permitting the best scientific usage from the very large data sets stored in observatory archives and produced by large surveys. The different Virtual Observatory projects collaborate to define common exchange standards, which are the key for a truly International Virtual Observatory: for instance their first common milestone has been a standard allowing exchange of tabular data, called VOTable. The Interoperability Work Area of the European Astrophysical Virtual Observatory project aims at networking European archives, by building a prototype using the CDS VizieR and Aladin tools, and at defining basic rules to help archive providers in interoperability implementation. The prototype is accessible for scientific usage, to get user feedback (and science results!) at an early stage of the project. ISO archive participates very actively to this endeavour, and more generally to information networking. The on-going inclusion of the ISO log in SIMBAD will allow higher level links for users.

Potential teratogenicity of methimazole: exposure of zebrafish embryos to methimazole causes similar developmental anomalies to human methimazole embryopathy.

PubMed

Komoike, Yuta; Matsuoka, Masato; Kosaki, Kenjiro

2013-06-01

While methimazole (MMI) is widely used in the therapy for hyperthyroidism, several groups have reported that maternal exposure to MMI results in a variety of congenital anomalies, including choanal and esophageal atresia, iridic and retinal coloboma, and delayed neurodevelopment. Thus, adverse effects of maternal exposure to MMI on fetal development have long been suggested; however, direct evidence for the teratogenicity of MMI has not been presented. Therefore, we studied the effects of MMI on early development by using zebrafish as a model organism. The fertilized eggs of zebrafish were collected immediately after spawning and grown in egg culture water containing MMI at various concentrations. External observation of the embryos revealed that exposure to high concentrations of MMI resulted in loss of pigmentation, hypoplastic hindbrain, turbid tissue in the forebrain, swelling of the notochord, and curly trunk. Furthermore, these effects occurred in a dose-dependent manner. Precise observation of the serial cross-sections of MMI-exposed embryos elucidated delayed development and hypoplasia of the whole brain and spinal cord, narrowing of the pharynx and esophagus, severe disruption of the retina, and aberrant structure of the notochord. These neuronal, pharyngeal, esophageal, and retinal anomalous morphologies have a direct analogy to the congenital anomalies observed in children exposed to MMI in utero. Here, we show the teratogenic effects of MMI on the development of zebrafish and provide the first experimental evidence for the connection between exposure to MMI and human MMI embryopathy. © 2013 Wiley Periodicals, Inc.

Mmi1, the Yeast Homologue of Mammalian TCTP, Associates with Stress Granules in Heat-Shocked Cells and Modulates Proteasome Activity

PubMed Central

Grousl, Tomas; Stradalova, Vendula; Heeren, Gino; Richter, Klaus; Breitenbach-Koller, Lore; Malinsky, Jan; Hasek, Jiri; Breitenbach, Michael

2013-01-01

As we have shown previously, yeast Mmi1 protein translocates from the cytoplasm to the outer surface of mitochondria when vegetatively growing yeast cells are exposed to oxidative stress. Here we analyzed the effect of heat stress on Mmi1 distribution. We performed domain analyses and found that binding of Mmi1 to mitochondria is mediated by its central alpha-helical domain (V-domain) under all conditions tested. In contrast, the isolated N-terminal flexible loop domain of the protein always displays nuclear localization. Using immunoelectron microscopy we confirmed re-location of Mmi1 to the nucleus and showed association of Mmi1 with intact and heat shock-altered mitochondria. We also show here that mmi1Δ mutant strains are resistant to robust heat shock with respect to clonogenicity of the cells. To elucidate this phenotype we found that the cytosolic Mmi1 holoprotein re-localized to the nucleus even in cells heat-shocked at 40°C. Upon robust heat shock at 46°C, Mmi1 partly co-localized with the proteasome marker Rpn1 in the nuclear region as well as with the cytoplasmic stress granules defined by Rpg1 (eIF3a). We co-localized Mmi1 also with Bre5, Ubp3 and Cdc48 which are involved in the protein de-ubiquitination machinery, protecting protein substrates from proteasomal degradation. A comparison of proteolytic activities of wild type and mmi1Δ cells revealed that Mmi1 appears to be an inhibitor of the proteasome. We conclude that one of the physiological functions of the multifunctional protein module, Mmi1, is likely in regulating degradation and/or protection of proteins thereby indirectly regulating the pathways leading to cell death in stressed cells. PMID:24204967

Prevention of relapse of Graves' disease by treatment with an intrathyroid injection of dexamethasone.

PubMed

Mao, Xiao-Ming; Li, Hui-Qin; Li, Qian; Li, Dong-Mei; Xie, Xiao-Jing; Yin, Guo-Ping; Zhang, Peng; Xu, Xiang-Hong; Wu, Jin-Dan; Chen, Song-Wang; Wang, Shu-Kui

2009-12-01

Antithyroid drugs are widely used in the treatment of Graves' disease (GD), but the relapse rate is very high after therapy withdrawal. We evaluated the reduction effects of intrathyroid injection of dexamethasone (IID) on the relapse rate of hyperthyroidism in patients with newly diagnosed GD. A total of 191 patients with GD completed the study. After 6 months of treatment with methimazole (MMI), the patients were randomly assigned to receive either MMI (96 patients) alone or MMI combined with IID (MMI+IID; 95 patients) treatment for 3 months, followed by continuing a dose of MMI that would maintain euthyroidism for the next 9 months in all of the patients. After withdrawal of the medical therapy, patients were followed for 24 months, and the relapse rate of hyperthyroidism was evaluated. No statistical difference was observed in the levels of serum FT(4), TSH, or TSH receptor antibodies (TR-Ab), the thyroid volume, or the TR-Ab positive rate between the two groups at month 6. After the next 3 months of treatment with MMI+IID or MMI alone, the levels of TSH increased significantly, and the levels of serum TR-Ab, the TR-Ab positive rate, and thyroid volume decreased significantly in the MMI+IID group compared with the MMI group. Seven patients (7.4%) experienced a relapse of overt hyperthyroidism in the MMI+IID group and 49 patients (51%) in MMI group during the 2-yr follow-up period (P < 0.001). MMI+IID treatment is helpful to prevent relapse of hyperthyroidism in GD after medical therapy withdrawal.

Maturity Model for Advancing Smart Grid Interoperability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Knight, Mark; Widergren, Steven E.; Mater, J.

2013-10-28

Abstract—Interoperability is about the properties of devices and systems to connect and work properly. Advancing interoperability eases integration and maintenance of the resulting interconnection. This leads to faster integration, lower labor and component costs, predictability of projects and the resulting performance, and evolutionary paths for upgrade. When specifications are shared and standardized, competition and novel solutions can bring new value streams to the community of stakeholders involved. Advancing interoperability involves reaching agreement for how things join at their interfaces. The quality of the agreements and the alignment of parties involved in the agreement present challenges that are best met withmore » process improvement techniques. The GridWise® Architecture Council (GWAC) sponsored by the United States Department of Energy is supporting an effort to use concepts from capability maturity models used in the software industry to advance interoperability of smart grid technology. An interoperability maturity model has been drafted and experience is being gained through trials on various types of projects and community efforts. This paper describes the value and objectives of maturity models, the nature of the interoperability maturity model and how it compares with other maturity models, and experiences gained with its use.« less

Anti-invasive and antiangiogenic effects of MMI-166 on malignant glioma cells

PubMed Central

2010-01-01

Background The constitutive overexpression of matrix metalloproteinases (MMPs) is frequently observed in malignant tumours. In particular, MMP-2 and MMP-9 have been reported to be closely associated with invasion and angiogenesis in malignant gliomas. Our study aimed to evaluate the antitumour effects of MMI-166 (Nalpha-[4-(2-Phenyl-2H- tetrazole-5-yl) phenyl sulfonyl]-D-tryptophan), a third generation MMP inhibitor, on three human glioma cell lines (T98G, U87MG, and ONS12) in vitro and in vivo. Methods The effects of MMI-166 on the gelatinolytic activity was analysed by gelatine zymography. The anti-invasive effect of MMI-166 was analysed by an in vitro invasion assay. An in vitro angiogenesis assay was also performed. In vitro growth inhibition of glioma cells by MMI-166 was determined by the MTT assay. The effect of MMI-166 on an orthotropic implantation model using athymic mice was also evaluated. Results Gelatine zymography revealed that MMP-2 and MMP-9 activities were suppressed by MMI-166. The invasion of glioma cells was suppressed by MMI-166. The angiogenesis assay showed that MMI-166 had a suppressive effect on glioma cell-induced angiogenesis. However, MMI-166 did not suppress glioma cell proliferation in the MTT assay. In vivo, MMI-166 suppressed tumour growth in athymic mice implanted orthotropically with T98G cells and showed an inhibitory effect on tumour-induced angiogenesis and tumour growth. This is the first report of the effect of a third generation MMP inhibitor on malignant glioma cells. Conclusions These results suggest that MMI-166 may have potentially suppressive effects on the invasion and angiogenesis of malignant gliomas. PMID:20587068

Practical image registration concerns overcome by the weighted and filtered mutual information metric

NASA Astrophysics Data System (ADS)

Keane, Tommy P.; Saber, Eli; Rhody, Harvey; Savakis, Andreas; Raj, Jeffrey

2012-04-01

Contemporary research in automated panorama creation utilizes camera calibration or extensive knowledge of camera locations and relations to each other to achieve successful results. Research in image registration attempts to restrict these same camera parameters or apply complex point-matching schemes to overcome the complications found in real-world scenarios. This paper presents a novel automated panorama creation algorithm by developing an affine transformation search based on maximized mutual information (MMI) for region-based registration. Standard MMI techniques have been limited to applications with airborne/satellite imagery or medical images. We show that a novel MMI algorithm can approximate an accurate registration between views of realistic scenes of varying depth distortion. The proposed algorithm has been developed using stationary, color, surveillance video data for a scenario with no a priori camera-to-camera parameters. This algorithm is robust for strict- and nearly-affine-related scenes, while providing a useful approximation for the overlap regions in scenes related by a projective homography or a more complex transformation, allowing for a set of efficient and accurate initial conditions for pixel-based registration.

Unsupervised Domain Adaptation with Multiple Acoustic Models

DTIC Science & Technology

2010-12-01

Discriminative MAP Adaptation Standard ML-MAP has been extended to incorporate discrim- inative training criteria such as MMI and MPE [10]. Dis- criminative MAP...smoothing variable I . For example, the MMI - MAP mean is given by ( mmi -map) jm = fnumjm (O) den jm(O)g+Djm̂jm + I (ml-map) jm f numjm den... MMI training, and Djm is the Gaussian-dependent parameter for the extended Baum-Welch (EBW) algorithm. MMI -MAP has been successfully applied in

Augmented growth inhibition of B16-BL6 melanoma by combined treatment with a selective matrix metalloproteinase inhibitor, MMI-166, and cytotoxic agents.

PubMed

Hojo, Kanji; Maki, Hideo; Sawada, Takuko Yamada; Maekawa, Ryuji; Yoshioka, Takayuki

2002-01-01

MMI-166 is a selective matrix metalloproteinase (MMP) inhibitor. The purpose of this study was to evaluate the antitumor efficacy of the combined treatment of MMI-166 with paclitaxel or carboplatin. Mice bearing B16-BL6 melanoma were treated p.o. with MMI-166 from 1 day after tumor inoculation. The mice were administered i.v. with either paclitaxel or carboplatin at the maximum tolerated dose (MTD). MMI-166 monotherapy inhibited in vivo growth of the B16-BL6 tumor to an extent similar to that of paclitaxel or carboplatin monotherapy. When MMI-166 was combined with paclitaxel or carboplatin, the antitumor efficacy was significantly (p < 0.01) augmented in comparison with either MMI-166 or each cytotoxic agent alone. The hematotoxicity study demonstrated that daily treatment with MMI-166 did not affect the blood cell number in the mice and more importantly the combination of MMI-166 with paclitaxel did not augment the hematotoxicity caused by paclitaxel. An in vitro cytotoxicity study showed that MMI-166 itself has neither direct cytotoxicity against B16-BL6 tumor cells nor does it augment the cytotoxicity of paclitaxel or carboplatin. These results indicate that augmented antitumor activity of the combination treatment was not simply due to the augmentation of direct cytotoxic activity, but was rather an additive effect of the antitumor activities of different mechanisms. They suggest the effectiveness of a combination therapy of MMI-166 with paclitaxel or carboplatin in clinical therapy.

What does the multiple mini interview have to offer over the panel interview?

PubMed

Pau, Allan; Chen, Yu Sui; Lee, Verna Kar Mun; Sow, Chew Fei; De Alwis, Ranjit

2016-01-01

This paper compares the panel interview (PI) performance with the multiple mini interview (MMI) performance and indication of behavioural concerns of a sample of medical school applicants. The acceptability of the MMI was also assessed. All applicants shortlisted for a PI were invited to an MMI. Applicants attended a 30-min PI with two faculty interviewers followed by an MMI consisting of ten 8-min stations. Applicants were assessed on their performance at each MMI station by one faculty. The interviewer also indicated if they perceived the applicant to be a concern. Finally, applicants completed an acceptability questionnaire. From the analysis of 133 (75.1%) completed MMI scoresheets, the MMI scores correlated statistically significantly with the PI scores (r=0.438, p=0.001). Both were not statistically associated with sex, age, race, or pre-university academic ability to any significance. Applicants assessed as a concern at two or more stations performed statistically significantly less well at the MMI when compared with those who were assessed as a concern at one station or none at all. However, there was no association with PI performance. Acceptability scores were generally high, and comparison of mean scores for each of the acceptability questionnaire items did not show statistically significant differences between sex and race categories. Although PI and MMI performances are correlated, the MMI may have the added advantage of more objectively generating multiple impressions of the applicant's interpersonal skill, thoughtfulness, and general demeanour. Results of the present study indicated that the MMI is acceptable in a multicultural context.

What does the multiple mini interview have to offer over the panel interview?

PubMed Central

Pau, Allan; Chen, Yu Sui; Lee, Verna Kar Mun; Sow, Chew Fei; Alwis, Ranjit De

2016-01-01

Introduction This paper compares the panel interview (PI) performance with the multiple mini interview (MMI) performance and indication of behavioural concerns of a sample of medical school applicants. The acceptability of the MMI was also assessed. Materials and methods All applicants shortlisted for a PI were invited to an MMI. Applicants attended a 30-min PI with two faculty interviewers followed by an MMI consisting of ten 8-min stations. Applicants were assessed on their performance at each MMI station by one faculty. The interviewer also indicated if they perceived the applicant to be a concern. Finally, applicants completed an acceptability questionnaire. Results From the analysis of 133 (75.1%) completed MMI scoresheets, the MMI scores correlated statistically significantly with the PI scores (r=0.438, p=0.001). Both were not statistically associated with sex, age, race, or pre-university academic ability to any significance. Applicants assessed as a concern at two or more stations performed statistically significantly less well at the MMI when compared with those who were assessed as a concern at one station or none at all. However, there was no association with PI performance. Acceptability scores were generally high, and comparison of mean scores for each of the acceptability questionnaire items did not show statistically significant differences between sex and race categories. Conclusions Although PI and MMI performances are correlated, the MMI may have the added advantage of more objectively generating multiple impressions of the applicant's interpersonal skill, thoughtfulness, and general demeanour. Results of the present study indicated that the MMI is acceptable in a multicultural context. PMID:26873337

What does the multiple mini interview have to offer over the panel interview?

PubMed

Pau, Allan; Chen, Yu Sui; Lee, Verna Kar Mun; Sow, Chew Fei; Alwis, Ranjit De

2016-01-01

Introduction This paper compares the panel interview (PI) performance with the multiple mini interview (MMI) performance and indication of behavioural concerns of a sample of medical school applicants. The acceptability of the MMI was also assessed. Materials and methods All applicants shortlisted for a PI were invited to an MMI. Applicants attended a 30-min PI with two faculty interviewers followed by an MMI consisting of ten 8-min stations. Applicants were assessed on their performance at each MMI station by one faculty. The interviewer also indicated if they perceived the applicant to be a concern. Finally, applicants completed an acceptability questionnaire. Results From the analysis of 133 (75.1%) completed MMI scoresheets, the MMI scores correlated statistically significantly with the PI scores (r=0.438, p=0.001). Both were not statistically associated with sex, age, race, or pre-university academic ability to any significance. Applicants assessed as a concern at two or more stations performed statistically significantly less well at the MMI when compared with those who were assessed as a concern at one station or none at all. However, there was no association with PI performance. Acceptability scores were generally high, and comparison of mean scores for each of the acceptability questionnaire items did not show statistically significant differences between sex and race categories. Conclusions Although PI and MMI performances are correlated, the MMI may have the added advantage of more objectively generating multiple impressions of the applicant's interpersonal skill, thoughtfulness, and general demeanour. Results of the present study indicated that the MMI is acceptable in a multicultural context.

Design and fabrication of multimode interference couplers based on digital micro-mirror system

NASA Astrophysics Data System (ADS)

Wu, Sumei; He, Xingdao; Shen, Chenbo

2008-03-01

Multimode interference (MMI) couplers, based on the self-imaging effect (SIE), are accepted popularly in integrated optics. According to the importance of MMI devices, in this paper, we present a novel method to design and fabricate MMI couplers. A technology of maskless lithography to make MMI couplers based on a smart digital micro-mirror device (DMD) system is proposed. A 1×4 MMI device is designed as an example, which shows the present method is efficient and cost-effective.

Cross border semantic interoperability for clinical research: the EHR4CR semantic resources and services

PubMed Central

Daniel, Christel; Ouagne, David; Sadou, Eric; Forsberg, Kerstin; Gilchrist, Mark Mc; Zapletal, Eric; Paris, Nicolas; Hussain, Sajjad; Jaulent, Marie-Christine; MD, Dipka Kalra

2016-01-01

With the development of platforms enabling the use of routinely collected clinical data in the context of international clinical research, scalable solutions for cross border semantic interoperability need to be developed. Within the context of the IMI EHR4CR project, we first defined the requirements and evaluation criteria of the EHR4CR semantic interoperability platform and then developed the semantic resources and supportive services and tooling to assist hospital sites in standardizing their data for allowing the execution of the project use cases. The experience gained from the evaluation of the EHR4CR platform accessing to semantically equivalent data elements across 11 European participating EHR systems from 5 countries demonstrated how far the mediation model and mapping efforts met the expected requirements of the project. Developers of semantic interoperability platforms are beginning to address a core set of requirements in order to reach the goal of developing cross border semantic integration of data. PMID:27570649

Perceptions and Cost-Analysis of a Multiple Mini-Interview in a Pharmacy School Admissions Process.

PubMed

Corelli, Robin L; Muchnik, Michael A; Beechinor, Ryan J; Fong, Gary; Vogt, Eleanor M; Cocohoba, Jennifer M; Tsourounis, Candy; Hudmon, Karen Suchanek

2015-11-25

To improve the quality of admissions interviews for a doctor of pharmacy program, using a multiple mini-interview (MMI) in place of the standard interview. Stakeholders completed an anonymous web-based survey. This study characterized perceptions of the MMI format across 3 major stakeholders (candidates, interviewers, admissions committee members) and included comparative cost estimates.Costs were estimated using human and facility resources from the 2012 cycle (standard format) and the 2013 cycle (MMI format). Most candidates (65%), interviewers (86%), and admissions committee members (79%) perceived the MMI format as effective for evaluating applicants, and most (59% of candidates, 84% of interviewers, 77% of committee members) agreed that the MMI format should be continued. Cost per candidate interviewed was $136.34 (standard interview) vs $75.30 (MMI). Perceptions of the MMI process were favorable across stakeholder groups, and this format was less costly per candidate interviewed.

Modified Mercalli Intensities (MMI) for some earthquakes in eastern North America (ENA) and empirical MMI site corrections for towns in ENA

USGS Publications Warehouse

Bakun, W.H.; Johnston, A.C.; Hopper, M.G.

2002-01-01

Modified Mercalli Intensity (MMI) assignments for earthquakes in eastern North America (ENA) were used by Bakun et al. (submitted) to develop a model for eastern North America for estimating the location and moment magnitude M of earthquakes from MMI observations. MMI assignments for most of the earthquakes considered by Bakun et al. (submitted) are published. MMI assignments for 6 other earthquakes used by Bakun et al. (submitted) are listed in this report: November 18, 1755 near Cape Ann, Massachusetts; January 5, 1843 near Marked Tree, Arkansas; October 31, 1895 in southern Illinois; November 18, 1929 on the Grand Banks, Newfoundland; September 26, 1990 in southeast Missouri; and May 4, 1991 near Risco, Missouri. MMI empirical site corrections developed and used by Bakun et al. (submitted) are also listed in this report.

Development and Assessment of the Multiple Mini-Interview in a School of Pharmacy Admissions Model

PubMed Central

McLaughlin, Jacqueline E.; Singer, David; Lewis, Margaret; Dinkins, Melissa M.

2015-01-01

Objective. To describe the development, implementation, and evaluation of the multiple mini-interview (MMI) within a doctor of pharmacy (PharmD) admissions model. Methods. Demographic data and academic indicators were collected for all candidates who participated in Candidates’ Day (n=253), along with the score for each MMI station criteria (7 stations). A survey was administered to all candidates who completed the MMI, and another survey was administered to all interviewers to examine perceptions of the MMI. Results. Analyses suggest that MMI stations assessed different attributes as designed, with Cronbach alpha for each station ranging from 0.90 to 0.95. All correlations between MMI station scores and academic indicators were negligible. No significant differences in average station scores were found based on age, gender, or race. Conclusion. This study provides additional support for the use of the MMI as an admissions tool in pharmacy education. PMID:26089562

Maternal transfer of methimazole and effects on thyroid hormone availability in embryonic tissues.

PubMed

Van Herck, Stijn L J; Geysens, Stijn; Bald, Edward; Chwatko, Grazyna; Delezie, Evelyne; Dianati, Elham; Ahmed, R G; Darras, Veerle M

2013-07-01

Methimazole (MMI) is an anti-thyroid drug used in the treatment of chronic hyperthyroidism. There is, however, some debate about its use during pregnancy as MMI is known to cross the mammalian placenta and reach the developing foetus. A similar problem occurs in birds, where MMI is deposited in the egg and taken up by the developing embryo. To investigate whether maternally derived MMI can have detrimental effects on embryonic development, we treated laying hens with MMI (0.03% in drinking water) and measured total and reduced MMI contents in the tissues of hens and embryos at different stages of development. In hens, MMI was selectively increased in the thyroid gland, while its levels in the liver and especially brain remained relatively low. Long-term MMI treatment induced a pronounced goitre with a decrease in thyroxine (T₄) content but an increase in thyroidal 3,5,3'-triiodothyronine (T₃) content. This resulted in normal T₃ levels in tissues except in the brain. In chicken embryos, MMI levels were similar in the liver and brain. They gradually decreased during development but always remained above those in the corresponding maternal tissues. Contrary to the situation in hens, T₄ availability was only moderately affected in embryos. Peripheral T₃ levels were reduced in 14-day-old embryos but normal in 18-day-old embryos, while brain T₃ content was decreased at all embryonic stages tested. We conclude that all embryonic tissues are exposed to relatively high doses of MMI and its oxidised metabolites. The effect of maternal MMI treatment on embryonic thyroid hormone availability is most pronounced for brain T₃ content, which is reduced throughout the embryonic development period.

D-ATM, a working example of health care interoperability: From dirt path to gravel road.

PubMed

DeClaris, John-William

2009-01-01

For many years, there have been calls for interoperability within health care systems. The technology currently exists and is being used in business areas like banking and commerce, to name a few. Yet the question remains, why has interoperability not been achieved in health care? This paper examines issues encountered and success achieved with interoperability during the development of the Digital Access To Medication (D-ATM) project, sponsored by the Substance Abuse and Mental Health Services Administration (SAMHSA). D-ATM is the first government funded interoperable patient management system. The goal of this paper is to provide lessons learned and propose one possible road map for health care interoperability within private industry and how government can help.

Climate-change-driven accelerated sea-level rise detected in the altimeter era.

PubMed

Nerem, R S; Beckley, B D; Fasullo, J T; Hamlington, B D; Masters, D; Mitchum, G T

2018-02-27

Using a 25-y time series of precision satellite altimeter data from TOPEX/Poseidon, Jason-1, Jason-2, and Jason-3, we estimate the climate-change-driven acceleration of global mean sea level over the last 25 y to be 0.084 ± 0.025 mm/y 2 Coupled with the average climate-change-driven rate of sea level rise over these same 25 y of 2.9 mm/y, simple extrapolation of the quadratic implies global mean sea level could rise 65 ± 12 cm by 2100 compared with 2005, roughly in agreement with the Intergovernmental Panel on Climate Change (IPCC) 5th Assessment Report (AR5) model projections. Copyright © 2018 the Author(s). Published by PNAS.

White matter damage and glymphatic dysfunction in a model of vascular dementia in rats with no prior vascular pathologies

PubMed Central

Venkat, Poornima; Chopp, Michael; Zacharek, Alex; Cui, Chengcheng; Zhang, Li; Li, Qingjiang; Lu, Mei; Zhang, Talan; Liu, Amy; Chen, Jieli

2016-01-01

We investigated cognitive function, axonal/white matter (WM) changes and glymphatic function of vascular dementia (VaD) using a multiple microinfarction (MMI) model in retired breeder (RB) rats. The MMI model induces significant (p<0.05) cognitive decline that worsens with age starting at 2 weeks, which persists until at least 6 weeks after MMI. RB rats subjected to MMI exhibit significant axonal/WM damage identified by decreased myelin thickness, oligodendrocyte progenitor cell numbers, axon density, synaptic protein expression in the cortex and striatum, cortical neuronal branching, and dendritic spine density in the cortex and hippocampus compared with age matched controls. MMI evokes significant dilation of perivascular spaces as well as water channel dysfunction indicated by decreased Aquaporin-4 (AQP-4) expression around blood vessels. MMI induced glymphatic dysfunction with delayed cerebrospinal fluid (CSF) penetration into the brain parenchyma via paravascular pathways as well as delayed waste clearance from the brain. The MMI model in RB rats decreases AQP-4 and induces glymphatic dysfunction which may play an important role in MMI induced axonal/WM damage and cognitive deficits. PMID:27940353

White matter damage and glymphatic dysfunction in a model of vascular dementia in rats with no prior vascular pathologies.

PubMed

Venkat, Poornima; Chopp, Michael; Zacharek, Alex; Cui, Chengcheng; Zhang, Li; Li, Qingjiang; Lu, Mei; Zhang, Talan; Liu, Amy; Chen, Jieli

2017-02-01

We investigated cognitive function, axonal/white matter (WM) changes and glymphatic function of vascular dementia using a multiple microinfarction (MMI) model in retired breeder (RB) rats. The MMI model induces significant (p < 0.05) cognitive decline that worsens with age starting at 2 weeks, which persists until at least 6 weeks after MMI. RB rats subjected to MMI exhibit significant axonal/WM damage identified by decreased myelin thickness, oligodendrocyte progenitor cell numbers, axon density, synaptic protein expression in the cortex and striatum, cortical neuronal branching, and dendritic spine density in the cortex and hippocampus compared with age-matched controls. MMI evokes significant dilation of perivascular spaces as well as water channel dysfunction indicated by decreased Aquaporin-4 expression around blood vessels. MMI-induced glymphatic dysfunction with delayed cerebrospinal fluid penetration into the brain parenchyma via paravascular pathways as well as delayed waste clearance from the brain. The MMI model in RB rats decreases Aquaporin-4 and induces glymphatic dysfunction which may play an important role in MMI-induced axonal/WM damage and cognitive deficits. Copyright © 2016 Elsevier Inc. All rights reserved.

OGC and Grid Interoperability in enviroGRIDS Project

NASA Astrophysics Data System (ADS)

Gorgan, Dorian; Rodila, Denisa; Bacu, Victor; Giuliani, Gregory; Ray, Nicolas

2010-05-01

EnviroGRIDS (Black Sea Catchment Observation and Assessment System supporting Sustainable Development) [1] is a 4-years FP7 Project aiming to address the subjects of ecologically unsustainable development and inadequate resource management. The project develops a Spatial Data Infrastructure of the Black Sea Catchment region. The geospatial technologies offer very specialized functionality for Earth Science oriented applications as well as the Grid oriented technology that is able to support distributed and parallel processing. One challenge of the enviroGRIDS project is the interoperability between geospatial and Grid infrastructures by providing the basic and the extended features of the both technologies. The geospatial interoperability technology has been promoted as a way of dealing with large volumes of geospatial data in distributed environments through the development of interoperable Web service specifications proposed by the Open Geospatial Consortium (OGC), with applications spread across multiple fields but especially in Earth observation research. Due to the huge volumes of data available in the geospatial domain and the additional introduced issues (data management, secure data transfer, data distribution and data computation), the need for an infrastructure capable to manage all those problems becomes an important aspect. The Grid promotes and facilitates the secure interoperations of geospatial heterogeneous distributed data within a distributed environment, the creation and management of large distributed computational jobs and assures a security level for communication and transfer of messages based on certificates. This presentation analysis and discusses the most significant use cases for enabling the OGC Web services interoperability with the Grid environment and focuses on the description and implementation of the most promising one. In these use cases we give a special attention to issues such as: the relations between computational grid and the OGC Web service protocols, the advantages offered by the Grid technology - such as providing a secure interoperability between the distributed geospatial resource -and the issues introduced by the integration of distributed geospatial data in a secure environment: data and service discovery, management, access and computation. enviroGRIDS project proposes a new architecture which allows a flexible and scalable approach for integrating the geospatial domain represented by the OGC Web services with the Grid domain represented by the gLite middleware. The parallelism offered by the Grid technology is discussed and explored at the data level, management level and computation level. The analysis is carried out for OGC Web service interoperability in general but specific details are emphasized for Web Map Service (WMS), Web Feature Service (WFS), Web Coverage Service (WCS), Web Processing Service (WPS) and Catalog Service for Web (CSW). Issues regarding the mapping and the interoperability between the OGC and the Grid standards and protocols are analyzed as they are the base in solving the communication problems between the two environments: grid and geospatial. The presetation mainly highlights how the Grid environment and Grid applications capabilities can be extended and utilized in geospatial interoperability. Interoperability between geospatial and Grid infrastructures provides features such as the specific geospatial complex functionality and the high power computation and security of the Grid, high spatial model resolution and geographical area covering, flexible combination and interoperability of the geographical models. According with the Service Oriented Architecture concepts and requirements of interoperability between geospatial and Grid infrastructures each of the main functionality is visible from enviroGRIDS Portal and consequently, by the end user applications such as Decision Maker/Citizen oriented Applications. The enviroGRIDS portal is the single way of the user to get into the system and the portal faces a unique style of the graphical user interface. Main reference for further information: [1] enviroGRIDS Project, http://www.envirogrids.net/

Hypothyroidism during antithyroid drug treatment with methimazole is a favorable prognostic indicator in patients with Graves' disease.

PubMed

Choo, Young Kwang; Yoo, Won Sang; Kim, Dong Woo; Chung, Hyun-Kyung

2010-09-01

A major problem with antithyroid drug (ATD) therapy in Graves' disease is the high relapse rate. Therefore, clinicians have sought prognostic indicators of permanent remission. Suppression of serum thyrotropin (TSH) when ATD therapy is stopped carries a poor prognosis, but little is known regarding the significance of elevated serum TSH concentrations in the course of ATD therapy. The objective of this study was to determine if elevated serum TSH concentrations during methimazole (MMI) therapy is associated with a favorable long-term prognosis. We retrospectively studied patients with Graves' disease who were initially on MMI, in whom this drug was stopped because they had undetectable thyroid-stimulating antibodies (TSAbs) or were euthyroid after at least 24 months on MMI treatment. A strategy of high MMI doses plus T4 was not used in these patients. We identified 40 patients with elevated serum TSH concentration (>10 microIU/mL) during MMI therapy (H-TSH group). Eighty-five percent of the H-TSH group had negative tests for TSAb. The H-TSH group was sex- and age-matched with 37 patients who had similar selection criteria, but did not have elevated serum TSH concentration during MMI therapy (N-TSH group). The H-TSH and N-TSH groups were similar in gross thyroid size, percentage of patients with exophthalmos, serum free thyroxine, duration of MMI treatment, TSAb status, duration that their TSAb tests remained negative, and thyroid peroxidase antibody titers. The patients were followed for 24 months after stopping MMI. In the H-TSH group, MMI-associated hypothyroidism typically occurred after 7-8 months of treatment with daily doses of 10-15 mg MMI. No patient had severe symptoms of hypothyroidism. The percentage of patients in remission at 6, 12, and 24 months after discontinuation of MMI was 90.0, 87.5, and 85.0, respectively, in the H-TSH group and 70.3, 67.6, and 54.1, respectively, in the N-TSH group (p  <  0.05 for the comparison of groups at 6 and 12 months and p  <  0.001 for comparison of the groups at 24 months). In patients with Graves' disease who are treated with MMI for at least 2 years and become euthyroid, the occurrence of elevated serum TSH concentrations during MMI treatment is a favorable indicator for long-term remission and is independent of multiple other factors including TSAb status, duration of MMI treatment, and gross parameters of goiter size.

Modified mercalli intensities for nine earthquakes in central and western Washington between 1989 and 1999

USGS Publications Warehouse

Brocher, Thomas M.; Dewey, James W.; Cassidy, John F.

2017-08-15

We determine Modified Mercalli (Seismic) Intensities (MMI) for nine onshore earthquakes of magnitude 4.5 and larger that occurred in central and western Washington between 1989 and 1999, on the basis of effects reported in postal questionnaires, the press, and professional collaborators. The earthquakes studied include four earthquakes of M5 and larger: the M5.0 Deming earthquake of April 13, 1990, the M5.0 Point Robinson earthquake of January 29, 1995, the M5.4 Duvall earthquake of May 3, 1996, and the M5.8 Satsop earthquake of July 3, 1999. The MMI are assigned using data and procedures that evolved at the U.S. Geological Survey (USGS) and its Department of Commerce predecessors and that were used to assign MMI to felt earthquakes occurring in the United States between 1931 and 1986. We refer to the MMI assigned in this report as traditional MMI, because they are based on responses to postal questionnaires and on newspaper reports, and to distinguish them from MMI calculated from data contributed by the public by way of the internet. Maximum traditional MMI documented for the M5 and larger earthquakes are VII for the 1990 Deming earthquake, V for the 1995 Point Robinson earthquake, VI for the 1996 Duvall earthquake, and VII for the 1999 Satsop earthquake; the five other earthquakes were variously assigned maximum intensities of IV, V, or VI. Starting in 1995, the Pacific Northwest Seismic Network (PNSN) published MMI maps for four of the studied earthquakes, based on macroseismic observations submitted by the public by way of the internet. With the availability now of the traditional USGS MMI interpreted for all the sites from which USGS postal questionnaires were returned, the four Washington earthquakes join a rather small group of earthquakes for which both traditional USGS MMI and some type of internet-based MMI have been assigned. The values and distributions of the traditional MMI are broadly similar to the internet-based PNSN intensities; we discuss some differences in detail that reflect differences in data-sampling procedure, differences in the procedure used to assign intensity numbers from macroseismic observations, and differences in how intensities are mapped.

Ocean Data Interoperability Platform (ODIP): developing a common framework for marine data management on a global scale

NASA Astrophysics Data System (ADS)

Schaap, D.

2015-12-01

Europe, the USA, and Australia are making significant progress in facilitating the discovery, access and long term stewardship of ocean and marine data through the development, implementation, population and operation of national, regional or international distributed ocean and marine observing and data management infrastructures such as SeaDataNet, EMODnet, IOOS, R2R, and IMOS. All of these developments are resulting in the development of standards and services implemented and used by their regional communities. The Ocean Data Interoperability Platform (ODIP) project is supported by the EU FP7 Research Infrastructures programme, National Science Foundation (USA) and Australian government and has been initiated 1st October 2012. Recently the project has been continued as ODIP 2 for another 3 years with EU HORIZON 2020 funding. ODIP includes all the major organisations engaged in ocean data management in EU, US, and Australia. ODIP is also supported by the IOC-IODE, closely linking this activity with its Ocean Data Portal (ODP) and Ocean Data Standards Best Practices (ODSBP) projects. The ODIP platform aims to ease interoperability between the regional marine data management infrastructures. Therefore it facilitates an organised dialogue between the key infrastructure representatives by means of publishing best practice, organising a series of international workshops and fostering the development of common standards and interoperability solutions. These are evaluated and tested by means of prototype projects. The presentation will give further background on the ODIP projects and the latest information on the progress of three prototype projects addressing: establishing interoperability between the regional EU, USA and Australia data discovery and access services (SeaDataNet CDI, US NODC, and IMOS MCP) and contributing to the global GEOSS and IODE-ODP portals; establishing interoperability between cruise summary reporting systems in Europe, the USA and Australia for routine harvesting of cruise data for delivery via the Partnership for Observation of Global Oceans (POGO) global portal; establishing common standards for a Sensor Observation Service (SOS) for selected sensors installed on vessels and in real-time monitoring systems using sensor web enablement (SWE)

Ocean Data Interoperability Platform (ODIP): developing a common framework for marine data management on a global scale

NASA Astrophysics Data System (ADS)

Schaap, Dick M. A.; Glaves, Helen

2016-04-01

Europe, the USA, and Australia are making significant progress in facilitating the discovery, access and long term stewardship of ocean and marine data through the development, implementation, population and operation of national, regional or international distributed ocean and marine observing and data management infrastructures such as SeaDataNet, EMODnet, IOOS, R2R, and IMOS. All of these developments are resulting in the development of standards and services implemented and used by their regional communities. The Ocean Data Interoperability Platform (ODIP) project is supported by the EU FP7 Research Infrastructures programme, National Science Foundation (USA) and Australian government and has been initiated 1st October 2012. Recently the project has been continued as ODIP II for another 3 years with EU HORIZON 2020 funding. ODIP includes all the major organisations engaged in ocean data management in EU, US, and Australia. ODIP is also supported by the IOC-IODE, closely linking this activity with its Ocean Data Portal (ODP) and Ocean Data Standards Best Practices (ODSBP) projects. The ODIP platform aims to ease interoperability between the regional marine data management infrastructures. Therefore it facilitates an organised dialogue between the key infrastructure representatives by means of publishing best practice, organising a series of international workshops and fostering the development of common standards and interoperability solutions. These are evaluated and tested by means of prototype projects. The presentation will give further background on the ODIP projects and the latest information on the progress of three prototype projects addressing: 1. establishing interoperability between the regional EU, USA and Australia data discovery and access services (SeaDataNet CDI, US NODC, and IMOS MCP) and contributing to the global GEOSS and IODE-ODP portals; 2. establishing interoperability between cruise summary reporting systems in Europe, the USA and Australia for routine harvesting of cruise data for delivery via the Partnership for Observation of Global Oceans (POGO) global portal; 3. the establishment of common standards for a Sensor Observation Service (SOS) for selected sensors installed on vessels and in real-time monitoring systems using sensor web enablement (SWE)

Qualitative analysis of MMI raters' scorings of medical school candidates: A matter of taste?

PubMed

Christensen, Mette K; Lykkegaard, Eva; Lund, Ole; O'Neill, Lotte D

2018-05-01

Recent years have seen leading medical educationalists repeatedly call for a paradigm shift in the way we view, value and use subjectivity in assessment. The argument is that subjective expert raters generally bring desired quality, not just noise, to performance evaluations. While several reviews document the psychometric qualities of the Multiple Mini-Interview (MMI), we currently lack qualitative studies examining what we can learn from MMI raters' subjectivity. The present qualitative study therefore investigates rater subjectivity or taste in MMI selection interview. Taste (Bourdieu 1984) is a practical sense, which makes it possible at a pre-reflective level to apply 'invisible' or 'tacit' categories of perception for distinguishing between good and bad. The study draws on data from explorative in-depth interviews with 12 purposefully selected MMI raters. We find that MMI raters spontaneously applied subjective criteria-their taste-enabling them to assess the candidates' interpersonal attributes and to predict the candidates' potential. In addition, MMI raters seemed to share a taste for certain qualities in the candidates (e.g. reflectivity, resilience, empathy, contact, alikeness, 'the good colleague'); hence, taste may be the result of an ongoing enculturation in medical education and healthcare systems. This study suggests that taste is an inevitable condition in the assessment of students' performance. The MMI set-up should therefore make room for MMI raters' taste and their connoisseurship, i.e. their ability to taste, to improve the quality of their assessment of medical school candidates.

An MMI-based demultiplexer with reduced cross-talk

NASA Astrophysics Data System (ADS)

Xiao, Yueyu; He, Sailing

2005-03-01

The crosstalk of a multimode interference (MMI)-based demultiplexer is reduced by connecting appropriately designed cascaded MMI filters of high-order. Numerical results show that the designed demultiplexer greatly improves the bandwidth of 20 dB cross-talk loss and has an excellent performance in terms of the insertion loss and chromatic dispersion. Formed with commonly used MMI couplers, the present structure is much easier to implement than other structures.

Relationship between dose of antithyroid drugs and adverse events in pediatric patients with Graves’ disease

PubMed Central

Yasuda, Kie; Miyoshi, Yoko; Tachibana, Makiko; Namba, Noriyuki; Miki, Kazunori; Nakata, Yukiko; Takano, Toru; Ozono, Keiichi

2017-01-01

Abstract. Graves’ disease (GD) accounts for a large proportion of pediatric hyperthyroidism, and the first-line treatment is antithyroid drug (ATD) therapy. Methimazole (MMI) is effective in most patients but is associated with significant adverse events (AEs). We reviewed the medical records of GD patients (n = 56) with onset age of <15 yr and investigated the relationship between MMI dose and AEs. The study population comprised 11 male and 45 female patients and the median age at diagnosis was 11 yr. All patients were initially treated with ATDs. Among the 52 patients initially treated with MMI, 20 received a low dose, and 32 received a high dose of MMI (< 0.7 vs ≥ 0.7 mg/kg/day, respectively). AEs occurred in 20% of the patients in the low-dose MMI group, and in 50% patients in the high-dose MMI group (p = 0.031). A greater variety of AEs was observed in the high-dose group. Neutropenia and rash were observed in both groups. With treatment transition to low-dose MMI according to the Japanese Society for Pediatric Endocrinology guidelines, we expect a decrease in the incidence of AEs in future. However, we should be careful as neutropenia and rash can occur independently of the MMI dose. PMID:28203042

Relationship between dose of antithyroid drugs and adverse events in pediatric patients with Graves' disease.

PubMed

Yasuda, Kie; Miyoshi, Yoko; Tachibana, Makiko; Namba, Noriyuki; Miki, Kazunori; Nakata, Yukiko; Takano, Toru; Ozono, Keiichi

2017-01-01

Graves' disease (GD) accounts for a large proportion of pediatric hyperthyroidism, and the first-line treatment is antithyroid drug (ATD) therapy. Methimazole (MMI) is effective in most patients but is associated with significant adverse events (AEs). We reviewed the medical records of GD patients (n = 56) with onset age of <15 yr and investigated the relationship between MMI dose and AEs. The study population comprised 11 male and 45 female patients and the median age at diagnosis was 11 yr. All patients were initially treated with ATDs. Among the 52 patients initially treated with MMI, 20 received a low dose, and 32 received a high dose of MMI (< 0.7 vs ≥ 0.7 mg/kg/day, respectively). AEs occurred in 20% of the patients in the low-dose MMI group, and in 50% patients in the high-dose MMI group (p = 0.031). A greater variety of AEs was observed in the high-dose group. Neutropenia and rash were observed in both groups. With treatment transition to low-dose MMI according to the Japanese Society for Pediatric Endocrinology guidelines, we expect a decrease in the incidence of AEs in future. However, we should be careful as neutropenia and rash can occur independently of the MMI dose.

Multiple Monochromatic Imaging (MMI) Status and Plans for LANL Campaigns on Omega and NIF

NASA Astrophysics Data System (ADS)

Wysocki, F. J.; Hsu, S. C.; Tregillis, I. L.; Schmitt, M. J.; Kyrala, G. A.; Martinson, D. D.; Murphy, T. J.; Mancini, R. C.; Nagayama, T.

2011-10-01

LANL's DIME (Defect Implosion Experiment) campaigns on Omega and NIF are aimed at obtaining improved understanding of defect-induced mix via experiments and simulations of directly driven high-Z doped plastic capsules with DD or DT gas fill. To this end, the MMI diagnostic has been identified as a key diagnostic for providing space and time-resolved density, temperature, and mix profiles. The high Z shell dopants used on Omega are Ti and V, and to be used on NIF are Ge and Se. This poster will discuss the following four areas of MMI-related work at LANL, in collaboration with UNR: (1) data and preliminary analysis of MMI data from FY11 Omega campaigns, (2) development of a capability to generate simulated MMI data from radiation- hydrodynamic simulations of ICF implosions, (3) design of an MMI instrument for NIF that will cover the photon energy range 9.5-16.9 keV which includes the Ge/Se, H- like/He-like, α/ β lines, and (4) the development of MMI data post- processing and spectroscopic analysis tools. Supported by DOE NNSA.

IT Labs Proof-of-Concept Project: Technical Data Interoperability (TDI) Pathfinder Via Emerging Standards

NASA Technical Reports Server (NTRS)

Conroy, Mike; Gill, Paul; Ingalls, John; Bengtsson, Kjell

2014-01-01

No known system is in place to allow NASA technical data interoperability throughout the whole life cycle. Life Cycle Cost (LCC) will be higher on many developing programs if action isn't taken soon to join disparate systems efficiently. Disparate technical data also increases safety risks from poorly integrated elements. NASA requires interoperability and industry standards, but breaking legacy ways is a challenge.

A Comprehensive Data Architecture for Multi-Disciplinary Marine Mammal Research

NASA Astrophysics Data System (ADS)

Palacios, D. M.; Follett, T.; Winsor, M.; Mate, B. R.

2016-02-01

The Oregon State University Marine Mammal Institute (MMI) comprises five research laboratories, each with specific research objectives, technological approaches, and data requirements. Among the types of data under management are individual photo-ID and field observations, telemetry (e.g., locations, dive characteristics, temperature, acoustics), genetics (and relatedness), stable isotope and toxicology assays, and remotely sensed environmental data. Coordinating data management that facilitates collaboration and comparative exploration among different researchers has been a longstanding challenge for our groups as well as for the greater wildlife research community. Research data are commonly stored locally in flat files or spreadsheets, with copies made and analyses performed with various packages without any common standards for interoperability, becoming a potential source of error. Database design, where it exists, is frequently arrived at ad-hoc. New types of data are generally tacked on when technological advances present them. A data management solution that can address these issues should meet the following requirements: be scalable, modular (i.e., able to incorporate new types of data as they arise), incorporate spatiotemporal dimensions, and be compliant with existing data standards such as DarwinCore. The MMI has developed a data architecture that allows the incorporation of any type of animal-associated data into a modular and portable format that can be integrated with any other dataset sharing the core format. It allows browsing, querying and visualization across any of the attributes that can be associated with individual animals, groups, sensors, or environmental datasets. We have implemented this architecture in an open-source geo-enabled relational database system (PostgreSQL, PostGIS), and have designed a suite of software tools (Python, R) to load, preprocess, visualize, analyze, and export data. This architecture could benefit organizations with similar data challenges.

a Virtual Hub Brokering Approach for Integration of Historical and Modern Maps

NASA Astrophysics Data System (ADS)

Bruno, N.; Previtali, M.; Barazzetti, L.; Brumana, R.; Roncella, R.

2016-06-01

Geospatial data are today more and more widespread. Many different institutions, such as Geographical Institutes, Public Administrations, collaborative communities (e.g., OSM) and web companies, make available nowadays a large number of maps. Besides this cartography, projects of digitizing, georeferencing and web publication of historical maps have increasingly spread in the recent years. In spite of these variety and availability of data, information overload makes difficult their discovery and management: without knowing the specific repository where the data are stored, it is difficult to find the information required and problems of interconnection between different data sources and their restricted interoperability limit a wide utilization of available geo-data. This paper aims to describe some actions performed to assure interoperability between data, in particular spatial and geographic data, gathered from different data providers, with different features and referring to different historical periods. The article summarizes and exemplifies how, starting from projects of historical map digitizing and Historical GIS implementation, respectively for the Lombardy and for the city of Parma, the interoperability is possible in the framework of the ENERGIC OD project. The European project ENERGIC OD, thanks to a specific component - the virtual hub - based on a brokering framework, copes with the previous listed problems and allows the interoperability between different data sources.

76 FR 71048 - Assistance to Firefighters Grant Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-16

... the highest-scoring applications for awards. Applications that involve interoperable communications... categories: (1) Activities designed to reach high- risk target groups and mitigate incidences of death and... communications project is consistent with the Statewide Communications Interoperability Plan (SCIP). If the State...

Comparison of the multiple mini-interview with the traditional interview for U.S. emergency medicine residency applicants: a single-institution experience.

PubMed

Soares, William E; Sohoni, Aparajita; Hern, Herbert G; Wills, Charlotte P; Alter, Harrison J; Simon, Barry C

2015-01-01

The multiple mini-interview (MMI) is a validated interview technique used primarily to evaluate medical school applicants. No study has compared MMIs with traditional interviews (TIs) in the evaluation of U.S. emergency medicine residency (EMR) applicants. During the 2011-2012 interview season, a four-station MMI was incorporated into the interview process for EMR applicants at Alameda Health System-Highland Hospital (AHS). A postinterview anonymous questionnaire was offered to all applicants after they submitted their rank lists but prior to release of National Residency Matching Program results. Respondents rated their perceptions of the MMI and TI on a five-point Likert scale. McNemar chi-square test was used to explore differences in respondents' perceptions of interview styles. One hundred ten interviewees completed the survey (73%). Overall, applicants found the TI more enjoyable than the MMI process (98 [89%] compared with 48 [44%], McNemar chi-square=28.66, P<.01) and preferred the TI process to the MMI (66 [60%] compared with 9 [10%], McNemar chi-square=40.81, P<.01). Sixteen applicants (14%) indicated that the use of the MMI would negatively affect their ranking of the program. In contrast to prior studies, U.S. EMR applicants to AHS preferred the TI to the MMI. Further investigation into the use of the MMI for selecting U.S. EMR applicants is warranted.

Ultra-short silicon MMI duplexer

NASA Astrophysics Data System (ADS)

Yi, Huaxiang; Huang, Yawen; Wang, Xingjun; Zhou, Zhiping

2012-11-01

The fiber-to-the-home (FTTH) systems are growing fast these days, where two different wavelengths are used for upstream and downstream traffic, typically 1310nm and 1490nm. The duplexers are the key elements to separate these wavelengths into different path in central offices (CO) and optical network unit (ONU) in passive optical network (PON). Multimode interference (MMI) has some benefits to be a duplexer including large fabrication tolerance, low-temperature dependence, and low-polarization dependence, but its size is too large to integrate in conventional case. Based on the silicon photonics platform, ultra-short silicon MMI duplexer was demonstrated to separate the 1310nm and 1490nm lights. By studying the theory of self-image phenomena in MMI, the first order images are adopted in order to keep the device short. A cascaded MMI structure was investigated to implement the wavelength splitting, where both the light of 1310nm and 1490nm was input from the same port, and the 1490nm light was coupling cross the first MMI and output at the cross-port in the device while the 1310nm light was coupling through the first and second MMI and output at the bar-port in the device. The experiment was carried on with the SOI wafer of 340nm top silicon. The cascaded MMI was investigated to fold the length of the duplexer as short as 117μm with the extinct ratio over 10dB.

UAS Integration in the NAS Project: DAA-TCAS Interoperability "mini" HITL Primary Results

NASA Technical Reports Server (NTRS)

Rorie, Conrad; Fern, Lisa; Shively, Jay; Santiago, Confesor

2016-01-01

At the May 2015 SC-228 meeting, requirements for TCAS II interoperability became elevated in priority. A TCAS interoperability workgroup was formed to identify and address key issues/questions. The TCAS workgroup came up with an initial list of questions and a plan to address those questions. As part of that plan, NASA proposed to run a mini HITL to address display, alerting and guidance issues. A TCAS Interoperability Workshop was held to determine potential display/alerting/guidance issues that could be explored in future NASA mini HITLS. Consensus on main functionality of DAA guidance when TCAS II RA occurs. Prioritized list of independent variables for experimental design. Set of use cases to stress TCAS Interoperability.

The validity of a behavioural multiple-mini-interview within an assessment centre for selection into specialty training

PubMed Central

2014-01-01

Background Entry into specialty training was determined by a National Assessment Centre (NAC) approach using a combination of a behavioural Multiple-Mini-Interview (MMI) and a written Situational Judgement Test (SJT). We wanted to know if interviewers could make reliable and valid decisions about the non-cognitive characteristics of candidates with the purpose of selecting them into general practice specialty training using the MMI. Second, we explored the concurrent validity of the MMI with the SJT. Methods A variance components analysis estimated the reliability and sources of measurement error. Further modelling estimated the optimal configurations for future MMI iterations. We calculated the relationship of the MMI with the SJT. Results Data were available from 1382 candidates, 254 interviewers, six MMI questions, five alternate forms of a 50-item SJT, and 11 assessment centres. For a single MMI question and one assessor, 28% of the variance between scores was due to candidate-to-candidate variation. Interviewer subjectivity, in particular the varying views that interviewer had for particular candidates accounted for 40% of the variance in scores. The generalisability co-efficient for a six question MMI was 0.7; to achieve 0.8 would require ten questions. A disattenuated correlation with the SJT (r = 0.35), and in particular a raw score correlation with the subdomain related to clinical knowledge (r = 0.25) demonstrated evidence for construct and concurrent validity. Less than two per cent of candidates would have failed the MMI. Conclusion The MMI is a moderately reliable method of assessment in the context of a National Assessment Centre approach. The largest source of error relates to aspects of interviewer subjectivity, suggesting enhanced interviewer training would be beneficial. MMIs need to be sufficiently long for precise comparison for ranking purposes. In order to justify long term sustainable use of the MMI in a postgraduate assessment centre approach, more theoretical work is required to understand how written and performance based test of non-cognitive attributes can be combined, in a way that achieves acceptable generalizability, and has validity. PMID:25123968

Employing Semantic Technologies for the Orchestration of Government Services

NASA Astrophysics Data System (ADS)

Sabol, Tomáš; Furdík, Karol; Mach, Marián

The main aim of the eGovernment is to provide efficient, secure, inclusive services for its citizens and businesses. The necessity to integrate services and information resources, to increase accessibility, to reduce the administrative burden on citizens and enterprises - these are only a few reasons why the paradigm of the eGovernment has been shifted from the supply-driven approach toward the connected governance, emphasizing the concept of interoperability (Archmann and Nielsen 2008). On the EU level, the interoperability is explicitly addressed as one of the four main challenges, including in the i2010 strategy (i2010 2005). The Commission's Communication (Interoperability for Pan-European eGovernment Services 2006) strongly emphasizes the necessity of interoperable eGovernment services, based on standards, open specifications, and open interfaces. The Pan-European interoperability initiatives, such as the European Interoperability Framework (2004) and IDABC, as well as many projects supported by the European Commission within the IST Program and the Competitiveness and Innovation Program (CIP), illustrate the importance of interoperability on the EU level.

Hypothyroidism Enhanced Ectonucleotidases and Acetylcholinesterase Activities in Rat Synaptosomes can be Prevented by the Naturally Occurring Polyphenol Quercetin.

PubMed

Baldissarelli, Jucimara; Santi, Adriana; Schmatz, Roberta; Abdalla, Fátima Husein; Cardoso, Andréia Machado; Martins, Caroline Curry; Dias, Glaecir R Mundstock; Calgaroto, Nicéia Spanholi; Pelinson, Luana Paula; Reichert, Karine Paula; Loro, Vania Lucia; Morsch, Vera Maria Melchiors; Schetinger, Maria Rosa Chitolina

2017-01-01

Thyroid hormones have an influence on the functioning of the central nervous system. Furthermore, the cholinergic and purinergic systems also are extensively involved in brain function. In this context, quercetin is a polyphenol with antioxidant and neuroprotective properties. This study investigated the effects of (MMI)-induced hypothyroidism on the NTPDase, 5'-nucleotidase, adenosine deaminase (ADA), and acetylcholinesterase (AChE) activities in synaptosomes of rats and whether the quercetin can prevent it. MMI at a concentration of 20 mg/100 mL was administered for 90 days in the drinking water. The animals were divided into six groups: control/water (CT/W), control/quercetin 10 mg/kg, control/quercetin 25 mg/kg, methimazole/water (MMI/W), methimazole/quercetin 10 mg/kg (MMI/Q10), and methimazole/quercetin 25 mg/kg (MMI/Q25). On the 30th day, hormonal dosing was performed to confirm hypothyroidism, and the animals were subsequently treated with 10 or 25 mg/kg quercetin for 60 days. NTPDase activity was not altered in the MMI/W group. However, treatment with quercetin decreased ATP and ADP hydrolysis in the MMI/Q10 and MMI/Q25 groups. 5'-nucleotidase activity increased in the MMI/W group, but treatments with 10 or 25 mg/kg quercetin decreased 5'-nucleotidase activity. ADA activity decreased in the CT/25 and MMI/Q25 groups. Furthermore, AChE activity was reduced in all groups with hypothyroidism. In vitro tests also demonstrated that quercetin per se decreased NTPDase, 5'-nucleotidase, and AChE activities. This study demonstrated changes in the 5'-nucleotidase and AChE activities indicating that purinergic and cholinergic neurotransmission are altered in this condition. In addition, quercetin can alter these parameters and may be a promising natural compound with important neuroprotective actions in hypothyroidism.

MMI attenuation and historical earthquakes in the basin and range province of western North America

USGS Publications Warehouse

Bakun, W.H.

2006-01-01

Earthquakes in central Nevada (1932-1959) were used to develop a modified Mercalli intensity (MMI) attenuation model for estimating moment magnitude M for earthquakes in the Basin and Range province of interior western North America. M is 7.4-7.5 for the 26 March 1872 Owens Valley, California, earthquake, in agreement with Beanland and Clark's (1994) M 7.6 that was estimated from geologic field observations. M is 7.5 for the 3 May 1887 Sonora, Mexico, earthquake, in agreement with Natali and Sbar's (1982) M 7.4 and Suter's (2006) M 7.5, both estimated from geologic field observations. MMI at sites in California for earthquakes in the Nevada Basin and Range apparently are not much affected by the Sierra Nevada except at sites near the Sierra Nevada where MMI is reduced. This reduction in MMI is consistent with a shadow zone produced by the root of the Sierra Nevada. In contrast, MMI assignments for earthquakes located in the eastern Sierra Nevada near the west margin of the Basin and Range are greater than predicted at sites in California. These higher MMI values may result from critical reflections due to layering near the base of the Sierra Nevada.

Turning Interoperability Operational with GST

NASA Astrophysics Data System (ADS)

Schaeben, Helmut; Gabriel, Paul; Gietzel, Jan; Le, Hai Ha

2013-04-01

GST - Geosciences in space and time is being developed and implemented as hub to facilitate the exchange of spatially and temporally indexed multi-dimensional geoscience data and corresponding geomodels amongst partners. It originates from TUBAF's contribution to the EU project "ProMine" and its perspective extensions are TUBAF's contribution to the actual EU project "GeoMol". As of today, it provides basic components of a geodata infrastructure as required to establish interoperability with respect to geosciences. Generally, interoperability means the facilitation of cross-border and cross-sector information exchange, taking into account legal, organisational, semantic and technical aspects, cf. Interoperability Solutions for European Public Administrations (ISA), cf. http://ec.europa.eu/isa/. Practical interoperability for partners of a joint geoscience project, say European Geological Surveys acting in a border region, means in particular provision of IT technology to exchange spatially and maybe additionally temporally indexed multi-dimensional geoscience data and corresponding models, i.e. the objects composing geomodels capturing the geometry, topology, and various geoscience contents. Geodata Infrastructure (GDI) and interoperability are objectives of several inititatives, e.g. INSPIRE, OneGeology-Europe, and most recently EGDI-SCOPE to name just the most prominent ones. Then there are quite a few markup languages (ML) related to geographical or geological information like GeoSciML, EarthResourceML, BoreholeML, ResqML for reservoir characterization, earth and reservoir models, and many others featuring geoscience information. Several Web Services are focused on geographical or geoscience information. The Open Geospatial Consortium (OGC) promotes specifications of a Web Feature Service (WFS), a Web Map Service (WMS), a Web Coverage Serverice (WCS), a Web 3D Service (W3DS), and many more. It will be clarified how GST is related to these initiatives, especially how it complies with existing or developing standards or quasi-standards and how it applies and extents services towards interoperability in the Earth sciences.

Temperature-driven global sea-level variability in the Common Era.

PubMed

Kopp, Robert E; Kemp, Andrew C; Bittermann, Klaus; Horton, Benjamin P; Donnelly, Jeffrey P; Gehrels, W Roland; Hay, Carling C; Mitrovica, Jerry X; Morrow, Eric D; Rahmstorf, Stefan

2016-03-15

We assess the relationship between temperature and global sea-level (GSL) variability over the Common Era through a statistical metaanalysis of proxy relative sea-level reconstructions and tide-gauge data. GSL rose at 0.1 ± 0.1 mm/y (2σ) over 0-700 CE. A GSL fall of 0.2 ± 0.2 mm/y over 1000-1400 CE is associated with ∼ 0.2 °C global mean cooling. A significant GSL acceleration began in the 19th century and yielded a 20th century rise that is extremely likely (probability [Formula: see text]) faster than during any of the previous 27 centuries. A semiempirical model calibrated against the GSL reconstruction indicates that, in the absence of anthropogenic climate change, it is extremely likely ([Formula: see text]) that 20th century GSL would have risen by less than 51% of the observed [Formula: see text] cm. The new semiempirical model largely reconciles previous differences between semiempirical 21st century GSL projections and the process model-based projections summarized in the Intergovernmental Panel on Climate Change's Fifth Assessment Report.

Temperature-driven global sea-level variability in the Common Era

PubMed Central

Kopp, Robert E.; Kemp, Andrew C.; Bittermann, Klaus; Horton, Benjamin P.; Donnelly, Jeffrey P.; Gehrels, W. Roland; Hay, Carling C.; Mitrovica, Jerry X.; Morrow, Eric D.; Rahmstorf, Stefan

2016-01-01

We assess the relationship between temperature and global sea-level (GSL) variability over the Common Era through a statistical metaanalysis of proxy relative sea-level reconstructions and tide-gauge data. GSL rose at 0.1 ± 0.1 mm/y (2σ) over 0–700 CE. A GSL fall of 0.2 ± 0.2 mm/y over 1000–1400 CE is associated with ∼0.2 °C global mean cooling. A significant GSL acceleration began in the 19th century and yielded a 20th century rise that is extremely likely (probability P≥0.95) faster than during any of the previous 27 centuries. A semiempirical model calibrated against the GSL reconstruction indicates that, in the absence of anthropogenic climate change, it is extremely likely (P=0.95) that 20th century GSL would have risen by less than 51% of the observed 13.8±1.5 cm. The new semiempirical model largely reconciles previous differences between semiempirical 21st century GSL projections and the process model-based projections summarized in the Intergovernmental Panel on Climate Change’s Fifth Assessment Report. PMID:26903659

The multiple mini-interview for selecting medical residents: first experience in the Middle East region.

PubMed

Ahmed, Ashraf; Qayed, Khalil Ibrahim; Abdulrahman, Mahera; Tavares, Walter; Rosenfeld, Jack

2014-08-01

Numerous studies have shown that multiple mini-interviews (MMI) provides a standard, fair, and more reliable method for assessing applicants. This article presents the first MMI experience for selection of medical residents in the Middle East culture and an Arab country. In 2012, we started using the MMI in interviewing applicants to the residency program of Dubai Health Authority. This interview process consisted of eight, eight-minute structured interview scenarios. Applicants rotated through the stations, each with its own interviewer and scenario. They read the scenario and were requested to discuss the issues with the interviewers. Sociodemographic and station assessment data provided for each applicant were analyzed to determine whether the MMI was a reliable assessment of the non-clinical attributes in the present setting of an Arab country. One hundred and eighty-seven candidates from 27 different countries were interviewed for Dubai Residency Training Program using MMI. They were graduates of 5 medical universities within United Arab Emirates (UAE) and 60 different universities outside UAE. With this applicant's pool, a MMI with eight stations, produced absolute and relative reliability of 0.8 and 0.81, respectively. The person × station interaction contributed 63% of the variance components, the person contributed 34% of the variance components, and the station contributed 2% of the variance components. The MMI has been used in numerous universities in English speaking countries. The MMI evaluates non-clinical attributes and this study provides further evidence for its reliability but in a different country and culture. The MMI offers a fair and more reliable assessment of applicants to medical residency programs. The present data show that this assessment technique applied in a non-western country and Arab culture still produced reliable results.

All-fiber tunable MMI fiber laser

NASA Astrophysics Data System (ADS)

Antonio-Lopez, J. E.; Castillo-Guzman, A.; May-Arrioja, D. A.; Selvas-Aguilar, R.; LiKamWa, P.

2009-05-01

We report on a novel tuning mechanism to fabricate an all-fiber tunable laser based on multimode interference (MMI) effects. It is well known that the wavelength response of MMI devices exhibits a linear dependence when the length of the multimode fiber (MMF) section. Therefore, tuning in the MMI filter is achieved using a ferrule (capillary tube of 127 μm diameter) filled with a liquid with a higher refractive index than that of the ferrule, which creates a variable liquid MMF. This liquid MMF is used to increase the effective length of the MMI filter and tuning takes place. Using this simple scheme, a tuning range of 30 nm was easily achieved, with very small insertion losses. The filter was tested within a typical Erbium doped fiber (EDF) ring laser cavity, and a tunable EDF laser covering the full C-band was demonstrated. The advantage of our laser is of course the simplicity of the tunable MMI filter, which results in an inexpensive tunable fiber laser.

Towards Cross-Organizational Innovative Business Process Interoperability Services

NASA Astrophysics Data System (ADS)

Karacan, Ömer; Del Grosso, Enrico; Carrez, Cyril; Taglino, Francesco

This paper presents the vision and initial results of the COIN (FP7-IST-216256) European project for the development of open source Collaborative Business Process Interoperability (CBPip) in cross-organisational business collaboration environments following the Software-as-a-Service Utility (SaaS-U) paradigm.

Special Topic Interoperability and EHR: Combining openEHR, SNOMED, IHE, and Continua as approaches to interoperability on national eHealth.

PubMed

Beštek, Mate; Stanimirović, Dalibor

2017-08-09

The main aims of the paper comprise the characterization and examination of the potential approaches regarding interoperability. This includes openEHR, SNOMED, IHE, and Continua as combined interoperability approaches, possibilities for their incorporation into the eHealth environment, and identification of the main success factors in the field, which are necessary for achieving required interoperability, and consequently, for the successful implementation of eHealth projects in general. The paper represents an in-depth analysis regarding the potential application of openEHR, SNOMED, IHE and Continua approaches in the development and implementation process of eHealth in Slovenia. The research method used is both exploratory and deductive in nature. The methodological framework is grounded on information retrieval with a special focus on research and charting of existing experience in the field, and sources, both electronic and written, which include interoperability concepts and related implementation issues. The paper will try to answer the following inquiries that are complementing each other: 1. Scrutiny of the potential approaches, which could alleviate the pertinent interoperability issues in the Slovenian eHealth context. 2. Analyzing the possibilities (requirements) for their inclusion in the construction process for individual eHealth solutions. 3. Identification and charting the main success factors in the interoperability field that critically influence development and implementation of eHealth projects in an efficient manner. Provided insights and identified success factors could serve as a constituent of the strategic starting points for continuous integration of interoperability principles into the healthcare domain. Moreover, the general implementation of the identified success factors could facilitate better penetration of ICT into the healthcare environment and enable the eHealth-based transformation of the health system especially in the countries which are still in an early phase of eHealth planning and development and are often confronted with differing interests, requirements, and contending strategies.

EUnetHTA information management system: development and lessons learned.

PubMed

Chalon, Patrice X; Kraemer, Peter

2014-11-01

The aim of this study was to describe the techniques used in achieving consensus on common standards to be implemented in the EUnetHTA Information Management System (IMS); and to describe how interoperability between tools was explored. Three face to face meetings were organized to identify and agree on common standards to the development of online tools. Two tools were created to demonstrate the added value of implementing interoperability standards at local levels. Developers of tools outside EUnetHTA were identified and contacted. Four common standards have been agreed on by consensus; and consequently all EUnetHTA tools have been modified or designed accordingly. RDF Site Summary (RSS) has demonstrated a good potential to support rapid dissemination of HTA information. Contacts outside EUnetHTA resulted in direct collaboration (HTA glossary, HTAi Vortal), evaluation of options for interoperability between tools (CRD HTA database) or a formal framework to prepare cooperation on concrete projects (INAHTA projects database). While being entitled a project on IT infrastructure, the work program was also about people. When having to agree on complex topics, fostering a cohesive group dynamic and hosting face to face meetings brings added value and enhances understanding between partners. The adoption of widespread standards enhanced the homogeneity of the EUnetHTA tools and should thus contribute to their wider use, therefore, to the general objective of EUnetHTA. The initiatives on interoperability of systems need to be developed further to support a general interoperable information system that could benefit the whole HTA community.

[Cost-effectiveness of the clinical treatment of Grave's disease in a public University Hospital: a retrospective analysis and prospective projection for a therapeutic approach].

PubMed

Lima, Nicolau; Knobel, Meyer; Camargo, Rosalinda Y; Tomimori, Eduardo; Medeiros-Neto, Geraldo

2005-08-01

The aim of the present study was to evaluate a new proposal for increasing compliance to the clinical management of patients with Graves' disease (GD) in a large and public University Hospital. The patients were carefully selected (no previous GD treatment, goiter volume less than 6 mL must be living in the metro area of São Paulo), received medication at no cost, were contacted frequently by the social worker and alerted for the date of consultation and only referred to a single endocrinologist during all phases of treatment. We recruited 229 patients with GD that were initially treated with methimazole (MMI--60 mg q.d) in a single daily dose followed by a combination of MMI (20 mg) plus L-T4 (100 microg) daily for 24 months. Only 83 patients (36.2%) completed the protocol and were subdivided in: Group 1 (n= 34) that were in remission for 3 years after discontinuation of the MMI and Group 2 (n= 49) that presented recurrence of GD between 2 and 36 months without MMI. Predictive factors associated with remission were: decrease of the glandular volume, serum TG< 40 ng/mL and normal TRAb values. We concluded that in spite of a careful protocol planned to increase compliance, more than 60% of patients with GD did not complete the therapeutic trial and were referred for radioiodine treatment. The solution for this low therapeutic success for GD should be the possible identification of factors that would indicate patients that are not inclined to follow a long period of clinical therapy.

Distributed Interoperable Metadata Registry; How Do Physicists Use an E-Print Archive? Implications for Institutional E-Print Services; A Framework for Building Open Digital Libraries; Implementing Digital Sanborn Maps for Ohio: OhioLINK and OPLIN Collaborative Project.

ERIC Educational Resources Information Center

Blanchi, Christophe; Petrone, Jason; Pinfield, Stephen; Suleman, Hussein; Fox, Edward A.; Bauer, Charly; Roddy, Carol Lynn

2001-01-01

Includes four articles that discuss a distributed architecture for managing metadata that promotes interoperability between digital libraries; the use of electronic print (e-print) by physicists; the development of digital libraries; and a collaborative project between two library consortia in Ohio to provide digital versions of Sanborn Fire…

Validating MMI Scores: Are We Measuring Multiple Attributes?

ERIC Educational Resources Information Center

Oliver, Tom; Hecker, Kent; Hausdorf, Peter A.; Conlon, Peter

2014-01-01

The multiple mini-interview (MMI) used in health professional schools' admission processes is reported to assess multiple non-cognitive constructs such as ethical reasoning, oral communication, or problem evaluation. Though validation studies have been performed with total MMI scores, there is a paucity of information regarding how well MMI…

Manipulating attention via mindfulness induction improves P300-based brain-computer interface performance

NASA Astrophysics Data System (ADS)

Lakey, Chad E.; Berry, Daniel R.; Sellers, Eric W.

2011-04-01

In this study, we examined the effects of a short mindfulness meditation induction (MMI) on the performance of a P300-based brain-computer interface (BCI) task. We expected that MMI would harness present-moment attentional resources, resulting in two positive consequences for P300-based BCI use. Specifically, we believed that MMI would facilitate increases in task accuracy and promote the production of robust P300 amplitudes. Sixteen-channel electroencephalographic data were recorded from 18 subjects using a row/column speller task paradigm. Nine subjects participated in a 6 min MMI and an additional nine subjects served as a control group. Subjects were presented with a 6 × 6 matrix of alphanumeric characters on a computer monitor. Stimuli were flashed at a stimulus onset asynchrony (SOA) of 125 ms. Calibration data were collected on 21 items without providing feedback. These data were used to derive a stepwise linear discriminate analysis classifier that was applied to an additional 14 items to evaluate accuracy. Offline performance analyses revealed that MMI subjects were significantly more accurate than control subjects. Likewise, MMI subjects produced significantly larger P300 amplitudes than control subjects at Cz and PO7. The discussion focuses on the potential attentional benefits of MMI for P300-based BCI performance.

Novel spiroimidazopyridine derivative SAK3 improves methimazole-induced cognitive deficits in mice.

PubMed

Noreen, Husain; Yabuki, Yasushi; Fukunaga, Kohji

2017-09-01

Methimazole (MMI) is a first-line therapy used to manage hyperthyroidism and Graves' disease. Despite its therapeutic benefit, chronic MMI administration can lead to hypothyroidism and perturb brain homeostasis in patients, resulting in neuropsychiatric disorders such as depression and cognitive dysfunction. We recently developed the spiroimidazopyridine derivative SAK3 as cognitive enhancer; however, mechanisms underlying its activity remained unclear. Here, we show that SAK3 potentially improves cognitive impairment seen following MMI-induced hypothyroidism. Twenty-four hours after MMI (75 mg/kg, i.p.) treatment, we administered SAK3 (0.1, 0.5 and 1 mg/kg, p.o.) to mice daily for 7 days. MMI treatment alone disrupted olfactory bulb (OB) glomerular structure, as assessed by staining with the olfactory marker protein (OMP), reduced the number of choline acetyl transferase (ChAT)-immunoreactive neurons in medial septum (MS), and significantly impaired cognition. SAK3 (0.5 and 1 mg/kg, p.o.) administration significantly restored the number of cholinergic MS neurons in MMI-treated mice, and SAK3 treatment at a higher dose significantly improved cognitive deficits seen in MMI-treated control mice. Overall, our study suggests that SAK3 treatment could antagonize such impairment in patients with hypothyroidism. Copyright © 2017 Elsevier Ltd. All rights reserved.

The fairness, predictive validity and acceptability of multiple mini interview in an internationally diverse student population--a mixed methods study.

PubMed

Kelly, Maureen E; Dowell, Jon; Husbands, Adrian; Newell, John; O'Flynn, Siun; Kropmans, Thomas; Dunne, Fidelma P; Murphy, Andrew W

2014-12-21

International medical students, those attending medical school outside of their country of citizenship, account for a growing proportion of medical undergraduates worldwide. This study aimed to establish the fairness, predictive validity and acceptability of Multiple Mini Interview (MMI) in an internationally diverse student population. This was an explanatory sequential, mixed methods study. All students in First Year Medicine, National University of Ireland Galway 2012 were eligible to sit a previously validated 10 station MMI. Quantitative data comprised: demographics, selection tool scores and First Year Assessment scores. Qualitative data comprised separate focus groups with MMI Assessors, EU and Non-EU students. 109 students participated (45% of class). Of this 41.3% (n = 45) were Non-EU and 35.8% (n = 39) did not have English as first language. Age, gender and socioeconomic class did not impact on MMI scores. Non-EU students and those for whom English was not a first language achieved significantly lower scores on MMI than their EU and English speaking counterparts (difference in mean 11.9% and 12.2% respectively, P<0.001). MMI score was associated with English language proficiency (IELTS) (r = 0.5, P<0.01). Correlations emerged between First Year results and IELTS (r = 0.44; p = 0.006; n = 38) and EU school exit exam (r = 0.52; p<0.001; n = 56). MMI predicted EU student OSCE performance (r = 0.27; p = 0.03; n = 64). In the analysis of focus group data two overarching themes emerged: Authenticity and Cultural Awareness. MMI was considered a highly authentic assessment that offered a deeper understanding of the applicant than traditional tools, with an immediate relevance to clinical practice. Cultural specificity of some stations and English language proficiency were seen to disadvantage international students. Recommendations included cultural awareness training for MMI assessors, designing and piloting culturally neutral stations, lengthening station duration and providing high quality advance information to candidates. MMI is a welcome addition to assessment armamentarium for selection, particularly with regard to stakeholder acceptability. Understanding the mediating and moderating influences for differences in performance of international candidates is essential to ensure that MMI complies with the metrics of good assessment practice and principles of both distributive and procedural justice for all applicants, irrespective of nationality and cultural background.

Putting the School Interoperability Framework to the Test

ERIC Educational Resources Information Center

Mercurius, Neil; Burton, Glenn; Hopkins, Bill; Larsen, Hans

2004-01-01

The Jurupa Unified School District in Southern California recently partnered with Microsoft, Dell and the Zone Integration Group for the implementation of a School Interoperability Framework (SIF) database repository model throughout the district (Magner 2002). A two-week project--the Integrated District Education Applications System, better known…

Interoperability for Space Mission Monitor and Control: Applying Technologies from Manufacturing Automation and Process Control Industries

NASA Technical Reports Server (NTRS)

Jones, Michael K.

1998-01-01

Various issues associated with interoperability for space mission monitor and control are presented in viewgraph form. Specific topics include: 1) Space Project Mission Operations Control Architecture (SuperMOCA) goals and methods for achieving them; 2) Specifics on the architecture: open standards ad layering, enhancing interoperability, and promoting commercialization; 3) An advertisement; 4) Status of the task - government/industry cooperation and architecture and technology demonstrations; and 5) Key features of messaging services and virtual devices.

Clinical Study of 27 Patients with Medial Medullary Infarction.

PubMed

Akimoto, Takayoshi; Ogawa, Katsuhiko; Morita, Akihiko; Suzuki, Yutaka; Kamei, Satoshi

2017-10-01

Medial medullary infarction (MMI) is a rare ischemic stroke. Frequency of each neurological finding in MMI was different in each study. We retrospectively evaluated the medical records of patients with cerebral infarction who were admitted between March 1998 and October 2015. Patients in our study were diagnosed as having MMI by magnetic resonance image examination. Of 2727 patients with ischemic stroke, 27 patients (20 males and 7 females) had MMI. The MMI was complicated by infarcts located in the pons (n = 6), cerebellum (n = 2), and lateral medulla (n = 1). One patient had bilateral MMI. Large-artery atherosclerosis was the most common etiology. Motor weakness of the extremities was the most common neurological finding. Diminished contralateral superficial sensation was more common than diminished contralateral vibratory sensation, and these 2 types of sensory disturbance were often complicated. The patients with large MMI significantly more often accompanied diminished touch (P = .003), pain (P = .017), and vibratory (P = .019) sensation. Facial weakness was shown more common contralateral to the infarcts than ipsilateral (n = 8 contralateral, n = 1 ipsilateral). Lingual palsy was also more common contralateral to the lesions (n = 3 contralateral, n = 1 ipsilateral). One patient alone fulfilled the classical Dejerine triad. In MMI, motor weakness of extremities was commonly shown, and complication of diminished sensations indicated the large infarcts. As for facial weakness and lingual palsy, the supranuclear type was more prominent than the infranuclear type. Copyright © 2017 National Stroke Association. Published by Elsevier Inc. All rights reserved.

Global Interoperability of Broadband Networks (GIBN): Project Overview

NASA Technical Reports Server (NTRS)

DePaula, Ramon P.

1998-01-01

Various issues associated with the Global Interoperability of Broadband Networks (GIBN) are presented in viewgraph form. Specific topics include GIBN principles, objectives and goals, and background. GIBN/NASA status, the Transpacific High Definition Video experiment, GIBN experiment selection criteria, satellite industry involvement, and current experiments associated with GIBN are also discussed.

An exploration of the relationship between emotional intelligence (EI) and the Multiple Mini-Interview (MMI).

PubMed

Yen, Wendy; Hovey, Richard; Hodwitz, Kathryn; Zhang, Su

2011-03-01

The present study explored the relationship between the Multiple Mini-Interview (MMI) admissions process and the Bar-On EQ-i emotional intelligence (EI) instrument in order to investigate the potential for the EQ-i to serve as a proxy measure to the MMI. Participants were 196 health science candidates who completed both the MMI and the EQ-i as part of their admissions procedure at the Michener Institute for Applied Health Sciences. Three types of analyses were conducted to examine the relationship between the two tools: reliability analyses, correlational analyses, and a t-test. The tools were found to be moderately reliable. No significant relationships were found between the MMI and the EQ-i at the total or subscale level. The ability of the EQ-i to discriminate between accepted and not-accepted students was also not supported. These findings do not support the use of the EQ-i as a potential pre-screening tool for the MMI, but rather highlight the need to exercise caution when using emotional intelligence instruments for high-stakes admissions purposes.

Functional requirements document for NASA/MSFC Earth Science and Applications Division: Data and information system (ESAD-DIS). Interoperability, 1992

NASA Technical Reports Server (NTRS)

Stephens, J. Briscoe; Grider, Gary W.

1992-01-01

These Earth Science and Applications Division-Data and Information System (ESAD-DIS) interoperability requirements are designed to quantify the Earth Science and Application Division's hardware and software requirements in terms of communications between personal and visualization workstation, and mainframe computers. The electronic mail requirements and local area network (LAN) requirements are addressed. These interoperability requirements are top-level requirements framed around defining the existing ESAD-DIS interoperability and projecting known near-term requirements for both operational support and for management planning. Detailed requirements will be submitted on a case-by-case basis. This document is also intended as an overview of ESAD-DIs interoperability for new-comers and management not familiar with these activities. It is intended as background documentation to support requests for resources and support requirements.

Birth defects after use of antithyroid drugs in early pregnancy: a Swedish nationwide study.

PubMed

Andersen, Stine Linding; Lönn, Stefan; Vestergaard, Peter; Törring, Ove

2017-10-01

Antithyroid drugs (ATDs) may have teratogenic effects, but more evidence is needed on the risk and types of birth defects after the use of methimazole (MMI) and propylthiouracil (PTU). This study aimed to evaluate the association between the use of ATDs in early pregnancy and birth defects. Swedish nationwide register-based cohort study. The study included 684 340 children live-born in Sweden from 2006 to 2012. Exposure groups defined by maternal ATD use in early pregnancy were MMI ( n  = 162); PTU ( n  = 218); MMI and PTU ( n  = 66); ATD before or after, but not in pregnancy ( n  = 1551) and non-exposed (never ATD ( n  = 682 343)). Outcome was cumulative incidence of birth defects diagnosed before two years of age. The cumulative incidence of birth defects was not significantly different in children exposed to MMI (6.8%, P  = 0.6) or PTU (6.4%, P  = 0.4) vs non-exposed (8.0%). For subtypes of birth defects, MMI was associated with an increased incidence of septal heart defects ( P  = 0.02). PTU was associated with ear ( P  = 0.005) and obstructive urinary system malformations ( P  = 0.006). A case of choanal atresia was observed after exposure to both MMI and PTU. The incidence of birth defects in children born to mothers who received ATD before or after, but not in pregnancy, was 8.8% and not significantly different from non-exposed ( P  = 0.3), MMI exposed ( P  = 0.4) or PTU exposed ( P  = 0.2). MMI and PTU were associated with subtypes of birth defects previously reported, but the frequency of ATD exposure in early pregnancy was low and severe malformations described in the MMI embryopathy were rarely observed. © 2017 European Society of Endocrinology.

Multiple mini-interviews: same concept, different approaches.

PubMed

Knorr, Mirjana; Hissbach, Johanna

2014-12-01

Increasing numbers of educational institutions in the medical field choose to replace their conventional admissions interviews with a multiple mini-interview (MMI) format because the latter has superior reliability values and reduces interviewer bias. As the MMI format can be adapted to the conditions of each institution, the question of under which circumstances an MMI is most expedient remains unresolved. This article systematically reviews the existing MMI literature to identify the aspects of MMI design that have impact on the reliability, validity and cost-efficiency of the format. Three electronic databases (OVID, PubMed, Web of Science) were searched for any publications in which MMIs and related approaches were discussed. Sixty-six publications were included in the analysis. Forty studies reported reliability values. Generally, raising the number of stations has more impact on reliability than raising the number of raters per station. Other factors with positive influence include the exclusion of stations that are too easy, and the use of normative anchored rating scales or skills-based rater training. Data on criterion-related validities and analyses of dimensionality were found in 31 studies. Irrespective of design differences, the relationship between MMI results and academic measures is small to zero. The McMaster University MMI predicts in-programme and licensing examination performance. Construct validity analyses are mostly exploratory and their results are inconclusive. Seven publications gave information on required resources or provided suggestions on how to save costs. The most relevant cost factors that are additional to those of conventional interviews are the costs of station development and actor payments. The MMI literature provides useful recommendations for reliable and cost-efficient MMI designs, but some important aspects have not yet been fully explored. More theory-driven research is needed concerning dimensionality and construct validity, the predictive validity of MMIs other than those of McMaster University, the comparison of station types, and a cost-efficient station development process. © 2014 John Wiley & Sons Ltd.

Modified Mercalli intensities (MMI) for large earthquakes near New Madrid, Missouri, in 1811-1812 and near Charleston, South Carolina, in 1886

USGS Publications Warehouse

Bakun, W.H.; Johnston, A.C.; Hopper, M.G.

2002-01-01

Large historical earthquakes occurred in the eastern United States on December 16, 1811 near New Madrid, MO, on January 23, 1812 near New Madrid, MO, on February 7, 1812 near New Madrid, MO, and on September 1, 1886 near Charleston, SC. Modified Mercalli Intensity (MMI) assignments for these earthquakes were used by Bakun et al. (submitted) to estimate the location and moment magnitude M of these earthquakes from MMI observations. The MMI assignments used by Bakun et al. (submitted) are listed in this report.

[Multiple mini interviews before the occupation of main training posts in paediatrics].

PubMed

Hertel, Niels Thomas; Bjerager, Mia; Boas, Malene; Boisen, Kirsten A; Børch, Klaus; Frederiksen, Marianne Sjølin; Holm, Kirsten; Grum-Nymann, Anette; Johnsen, Martin M; Whitehouse, Stine; Balslev, Thomas

2013-09-09

Interviews are mandatory in Denmark when selecting doctors for training positions. We used multiple mini interviews (MMI) at four recruitment rounds for the main training posts in paediatrics. In total, 125 candidates were evaluated and assessed by CV and MMI (4-5 stations). Reliability for individual stations in MMI assessed by Cronbach's alpha was adequate (0.63-0.92). The overall reliability assessed by G-theory was lower, suggesting that different skills were tested. The acceptability was high. Our experiences with MMI suggest good feasibility and reliability. An increasing number of stations may improve the overall reliability.

A simple brain atrophy measure improves the prediction of malignant middle cerebral artery infarction by acute DWI lesion volume.

PubMed

Beck, Christoph; Kruetzelmann, Anna; Forkert, Nils D; Juettler, Eric; Singer, Oliver C; Köhrmann, Martin; Kersten, Jan F; Sobesky, Jan; Gerloff, Christian; Fiehler, Jens; Schellinger, Peter D; Röther, Joachim; Thomalla, Götz

2014-06-01

In patients with malignant middle cerebral artery infarction (MMI) decompressive surgery within 48 h improves functional outcome. In this respect, early identification of patients at risk of developing MMI is crucial. While the acute diffusion weighted imaging (DWI) lesion volume was found to predict MMI with high predictive values, the potential impact of preexisting brain atrophy on the course of space-occupying middle cerebral artery (MCA) infarction and the development of MMI remains unclear. We tested the hypothesis that the combination of the acute DWI lesion volume with simple measures of brain atrophy improves the early prediction of MMI. Data from a prospective, multicenter, observational study, which included patients with acute middle cerebral artery main stem occlusion studied by MRI within 6 h of symptom onset, was analyzed retrospectively. The development of MMI was defined according to the European randomized controlled trials of decompressive surgery. Acute DWI lesion volume, as well as brain and cerebrospinal fluid volume (CSF) were delineated. The intercaudate distance (ICD) was assessed as a linear brain atrophy marker by measuring the hemi-ICD of the intact hemisphere to account for local brain swelling. Binary logistic regression analysis was used to identify significant predictors of MMI. Cut-off values were determined by Classification and Regression Trees analysis. Sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) of the resulting models were calculated. Twenty-one (18 %) of 116 patients developed a MMI. Malignant middle cerebral artery infarctions patients had higher National Institutes of Health Stroke Scale scores on admission and presented more often with combined occlusion of the internal carotid artery and MCA. There were no differences in brain and CSF volume between the two groups. Diffusion weighted imaging lesion volume was larger (p < 0.001), while hemi-ICD was smaller (p = 0.029) in MMI patients. Inclusion of hemi-ICD improved the prediction of MMI. Best cut-off values to predict the development of MMI were DWI lesion volume > 87 ml and hemi-ICD ≤ 9.4 mm. The addition of hemi-ICD to the decision tree strongly increased PPV (0.93 vs. 0.70) resulting in a reduction of false positive findings from 7/23 (30 %) to 1/15 (7 %), while there were only slight changes in specificity, sensitivity and NPV. The absolute number of correct classifications increased by 4 (3.4 %). The integration of hemi-ICD as a linear marker of brain atrophy, that can easily be assessed in an emergency setting, may improve the prediction of MMI by lesion volume based predictive models.

Lemnos interoperable security project.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Halbgewachs, Ronald D.

2010-03-01

With the Lemnos framework, interoperability of control security equipment is straightforward. To obtain interoperability between proprietary security appliance units, one or both vendors must now write cumbersome 'translation code.' If one party changes something, the translation code 'breaks.' The Lemnos project is developing and testing a framework that uses widely available security functions and protocols like IPsec - to form a secure communications channel - and Syslog, to exchange security log messages. Using this model, security appliances from two or more different vendors can clearly and securely exchange information, helping to better protect the total system. Simplify regulatory compliance inmore » a complicated security environment by leveraging the Lemnos framework. As an electric utility, are you struggling to implement the NERC CIP standards and other regulations? Are you weighing the misery of multiple management interfaces against committing to a ubiquitous single-vendor solution? When vendors build their security appliances to interoperate using the Lemnos framework, it becomes practical to match best-of-breed offerings from an assortment of vendors to your specific control systems needs. The Lemnos project is developing and testing a framework that uses widely available open-source security functions and protocols like IPsec and Syslog to create a secure communications channel between appliances in order to exchange security data.« less

Regulation of endotoxin-induced inhibition of macrophage migration by fresh serum.

PubMed Central

Heilman, D H

1977-01-01

Purified endotoxin (LPS) caused macrophage migration inhibition (MMI) in capillary tube cultures of guinea pig peritoneal macrophages in medium prepared with 15% fresh-frozen guinea pig serum. The inactivation of serum by heating at 56 degrees C for 30 min or by zymosan absorption prevented LPS-induced MMI. LPS was fully inhibitory in fresh C4-deficient guinea pig serum. Heat treatment of normal serum at 50 to 52 degrees C for 30 min to inactivate the alternate complement (C) pathway prevented or significantly decreased LPS-induced MMI, but heating C4-deficient serum at 50 to 52 degrees C for 30 min prevented LPS-MMI in all instances. These results suggest that the reaction was effected via the alternate C pathway but that some inhibition of migration was permitted via the classical C pathway, presumably due to antibodies for LPS in some normal sera. Pretreatment of normal serum with cobra venom factor decreased or prevented LPS-MMI in most instances, but similar results were obtained with C4-deficient serum. Experiments with chelated sera were unsuccessful because of the immobilization of macrophages by 10 mM ethylenediamine-tetraacetic acid and by 10 mM Mg-ethyleneglycol-bis (beta-aminoethyl)-N,N-tetraacetic acid. Low doses of concanavalin A and staphylococcal enterotoxin B and large doses of pokeweed mitogen caused MMI in "inactivated serum" medium, but MMI was enhanced in fresh serum. PMID:330407

Antithyroid drug-related hepatotoxicity in hyperthyroidism patients: a population-based cohort study

PubMed Central

Wang, Meng-Ting; Lee, Wan-Ju; Huang, Tien-Yu; Chu, Che-Li; Hsieh, Chang-Hsun

2014-01-01

Aims The evidence of hepatotoxicity of antithyroid drugs (ATDs) is limited to case reports or spontaneous reporting. This study aimed to quantify the incidence and comparative risks of hepatotoxicity for methimazole (MMI)/carbimazole (CBM) vs. propylthiouracil (PTU) in a population-based manner. Methods We conducted a cohort study of hyperthyroidism patients initially receiving MMI/CBM or PTU between 1 January 2004 and 31 December 2008 using the Taiwan National Health Insurance Research Database. The examined hepatotoxicity consisted of cholestasis, non-infectious hepatitis, acute liver failure and liver transplant, with the incidences and relative risks being quantified by Poisson exact methods and Cox proportional hazard models, respectively. Results The study cohort comprised 71 379 ATD initiators, with a median follow-up of 196 days. MMI/CBM vs. PTU users had a higher hepatitis incidence rate (3.17/1000 vs. 1.19/1000 person-years) but a lower incidence of acute liver failure (0.32/1000 vs. 0.68/1000 person-years). The relative risk analysis indicated that any use of MMI/CBM was associated with a 2.89-fold (95% CI 1.81, 4.60) increased hepatitis risk compared with PTU, with the risk increasing to 5.08-fold for high dose MMI/CBM (95% CI 3.15, 8.18). However, any MMI/CBM use vs. PTU was not related to an increased risk of cholestasis (adjusted hazard ratio [HR] 1.14, 95% CI 0.40, 3.72) or acute liver failure (adjusted HR 0.54, 95% CI 0.24, 1.22). Conclusions MMI/CBM and PTU exert dissimilar incidence rates of hepatotoxicity. Compared to PTU, MMI/CBM are associated in a dose-dependent manner with an increased risk for hepatitis while the risks are similar for acute liver failure and cholestasis. PMID:25279406

Mode-medium instability and its correction with a Gaussian-reflectivity mirror

NASA Technical Reports Server (NTRS)

Webster, K. L.; Sung, C. C.

1992-01-01

A high-power CO2 laser beam is known to deteriorate after a few microseconds due to a mode-medium instability (MMI) which results from an intensity-dependent heating rate related to the vibrational-to-translational decay of the upper and lower CO2 lasing levels. An iterative numerical technique is developed to model the time evolution of the beam as it is affected by the MMI. The technique is used to study the MMI in an unstable CO2 resonator with a hard-edge output mirror for different parameters like the Fresnel number and the gas density. The results show that the mode of the hard edge unstable resonator deteriorates because of the diffraction ripples in the mode. A Gaussian-reflectivity mirror was used to correct the MMI. This mirror produces a smoother intensity profile which significantly reduces the effects of the MMI. Quantitative results on peak density variation and beam quality are presented.

Mode-medium instability and its correction with a Gaussian reflectivity mirror

NASA Technical Reports Server (NTRS)

Webster, K. L.; Sung, C. C.

1990-01-01

A high power CO2 laser beam is known to deteriorate after a few microseconds due to a mode-medium instability (MMI) which results from an intensity dependent heating rate related to the vibrational-to-translational decay of the upper and lower CO2 lasing levels. An iterative numerical technique is developed to model the time evolution of the beam as it is affected by the MMI. The technique is used to study the MMI in an unstable CO2 resonator with a hard-edge output mirror for different parameters like the Fresnel number and the gas density. The results show that the mode of the hard edge unstable resonator deteriorates because of the diffraction ripples in the mode. A Gaussian-reflectivity mirror was used to correct the MMI. This mirror produces a smoother intensity profile which significantly reduces the effects of the MMI. Quantitative results on peak density variation and beam quality are presented.

Can openEHR archetypes be used in a national context? The Danish archetype proof-of-concept project.

PubMed

Bernstein, Knut; Tvede, Ida; Petersen, Jan; Bredegaard, Kirsten

2009-01-01

Semantic interoperability and secondary use of data are important informatics challenges in modern healthcare. Connected Digital Health Denmark is investigating if the openEHR reference model, archetypes and templates could be used for representing and exchanging clinical content specification and could become a candidate for a national logical infrastructure for semantic interoperability. The Danish archetype proof-of-concept project has tried out some elements of the openEHR methodology in cooperation with regions and vendors. The project has pointed out benefits and challenges using archetypes, and has identified barriers that need to be addressed in the next steps.

ECITE: A Testbed for Assessment of Technology Interoperability and Integration wiht Architecture Components

NASA Astrophysics Data System (ADS)

Graves, S. J.; Keiser, K.; Law, E.; Yang, C. P.; Djorgovski, S. G.

2016-12-01

ECITE (EarthCube Integration and Testing Environment) is providing both cloud-based computational testing resources and an Assessment Framework for Technology Interoperability and Integration. NSF's EarthCube program is funding the development of cyberinfrastructure building block components as technologies to address Earth science research problems. These EarthCube building blocks need to support integration and interoperability objectives to work towards a coherent cyberinfrastructure architecture for the program. ECITE is being developed to provide capabilities to test and assess the interoperability and integration across funded EarthCube technology projects. EarthCube defined criteria for interoperability and integration are applied to use cases coordinating science problems with technology solutions. The Assessment Framework facilitates planning, execution and documentation of the technology assessments for review by the EarthCube community. This presentation will describe the components of ECITE and examine the methodology of cross walking between science and technology use cases.

Silicon Nitride Grating Coupler with Flexible Bandwidth Incorporating a Serially Concatenated Multimode Interference Filter

NASA Astrophysics Data System (ADS)

Kim, Woo-Ju; Lee, Hak-Soon; Lee, Sang-Shin

2012-04-01

A compact silicon nitride grating coupler with flexible bandwidth was demonstrated taking advantage of a basic grating integrated with a serially connected multistage multimode interference (MMI) filter. The spectral response could be tailored by varying the order of the MMI filter, without affecting the basic grating structure. The dependence of the spectral response of the proposed device on the order of the MMI stage was thoroughly investigated. As regards the fabricated grating coupler with a four-stage MMI filter, the observed spectral bandwidth was efficiently altered from 53 to 21 nm in the ˜1550 nm spectral band.

Silicon cross-connect filters using microring resonator coupled multimode-interference-based waveguide crossings.

PubMed

Xu, Fang; Poon, Andrew W

2008-06-09

We report silicon cross-connect filters using microring resonator coupled multimode-interference (MMI) based waveguide crossings. Our experiments reveal that the MMI-based cross-connect filters impose lower crosstalk at the crossing than the conventional cross-connect filters using plain crossings, while offering a nearly symmetric resonance line shape in the drop-port transmission. As a proof-of-concept for cross-connection applications, we demonstrate on a silicon-on-insulator substrate (i) a 4-channel 1 x 4 linear-cascaded MMI-based cross-connect filter, and (ii) a 2-channel 2 x 2 array-cascaded MMI-based cross-connect filter.

Dual-wavelength noise-like pulse generation in passively mode-locked all-fiber laser based on MMI effect

NASA Astrophysics Data System (ADS)

Shi, Guannan; Fu, Shijie; Sheng, Quan; Shi, Wei; Yao, Jianquan

2018-02-01

We report on the generation of dual-wavelength noise-like pulse (NLP) from a passively mode-locked all-fiber laser based on multimode interference (MMI) effect. The theory to evaluate and design transmission spectrum of MMI filter is analyzed. A homemade MMI filter was employed in an Er-doped fiber ring laser with NPE configuration and dual-wavelength NLP at 1530 and 1600 nm was obtained with 3-dB bandwidth of 18.1 and 41.9 nm, respectively. The output had a signal-to-noise ratio higher than 35 dB and can achieve self-started operation.

Comparing Simulated and Observed Spectroscopic Signatures of Mix in Omega Capsules

NASA Astrophysics Data System (ADS)

Tregillis, I. L.; Shah, R. C.; Hakel, P.; Cobble, J. A.; Murphy, T. J.; Krasheninnikova, N. S.; Hsu, S. C.; Bradley, P. A.; Schmitt, M. J.; Batha, S. H.; Mancini, R. C.

2012-10-01

The Defect-Induced Mix Experiment (DIME) campaign at Los Alamos National Laboratory uses multi-monochromatic X-ray imaging (MMI)footnotetextT. Nagayama, R.C. Mancini, R. Florido, et al, J. App. Phys. 109, 093303 (2011) to detect the migration of high-Z spectroscopic dopants into the hot core of an imploded capsule. We have developed an MMI post-processing tool for producing synthetic datasets from two- and three-dimensional Lagrangian numerical simulations of Omega and NIF shots. These synthetic datasets are of sufficient quality, and contain sufficient physics, that they can be analyzed in the same manner as actual MMI data. We have carried out an extensive comparison between simulated and observed MMI data for a series of polar direct-drive shots carried out at the Omega laser facility in January, 2011. The capsule diameter was 870 microns; the 15 micron CH ablators contained a 2 micron Ti-doped layer along the inner edge. All capsules were driven with 17 kJ; some capsules were manufactured with an equatorial ``trench'' defect. This talk will focus on the construction of spectroscopic-quality synthetic MMI datasets from numerical simulations, and their correlation with MMI measurements.

Extremely small polarization beam splitter based on a multimode interference coupler with a silicon hybrid plasmonic waveguide.

PubMed

Guan, Xiaowei; Wu, Hao; Shi, Yaocheng; Dai, Daoxin

2014-01-15

A novel polarization beam splitter (PBS) with an extremely small footprint is proposed based on a multimode interference (MMI) coupler with a silicon hybrid plasmonic waveguide. The MMI section, covered with a metal strip partially, is designed to achieve mirror imaging for TE polarization. On the other hand, for TM polarization, there is almost no MMI effect since the higher-order TM modes are hardly excited due to the hybrid plasmonic effect. With this design, the whole PBS including the 1.1 μm long MMI section as well as the output section has a footprint as small as ∼1.8 μm×2.5 μm. Besides, the fabrication process is simple since the waveguide dimension is relatively large (e.g., the input/output waveguides widths w ≥300 nm and the MMI width w(MMI)=800 nm). Numerical simulations show that the designed PBS has a broad band of ∼80 nm for an ER >10 dB as well as a large fabrication tolerance to allow a silicon core width variation of -30 nm<Δw<50 nm and a metal strip width variation of -200 nm<Δw(m)<0.

Earthquake Macro-zonation Based Peak Ground Acceleration, Modified Mercalli Intensity, And Type of Rocks around Matano Fault

NASA Astrophysics Data System (ADS)

Karnaen, Muh; Suriamihardja, D. A.; Maulana, A.; Jaya, A.

2018-03-01

This study aims to determine earthquake vulnerable zones. We conducted research on earthquake macro-zonation based on PGA, Modified Mercalli Intensity (MMI), and type of rocks around Matano Fault in the area of 1.60 S to 2.990 S and 120.50 E to 122.470 E. We have acquired Maximum PGA and Modified Mercalli Intensity (MMI) for each observation point on the ground from the four major earthquake events. The empirical model is used due to lack of acceleration data recorded. We tried some empirical methods, but the McGuire method is found to be acceptable for this area. The result gives the maximum variation of PGA which is ranged between 18.40 - 363.54 gals. While the variation of MMI using empirical Wald attenuation gives values ranging from 2.9 - 7.7 MMI. The most vulnerable zone is located around Sorowako city with PGA value of 326.55 gals and MMI value of 7.5 MMI. This area is between ultra-basic rock and metamorphic rock formation. The vulnerable zone is near largest earthquake 6.2 M on 15-02-2011.

A low-complexity region in the YTH domain protein Mmi1 enhances RNA binding.

PubMed

Stowell, James A W; Wagstaff, Jane L; Hill, Chris H; Yu, Minmin; McLaughlin, Stephen H; Freund, Stefan M V; Passmore, Lori A

2018-06-15

Mmi1 is an essential RNA-binding protein in the fission yeast Schizosaccharomyces pombe that eliminates meiotic transcripts during normal vegetative growth. Mmi1 contains a YTH domain that binds specific RNA sequences, targeting mRNAs for degradation. The YTH domain of Mmi1 uses a noncanonical RNA-binding surface that includes contacts outside the conserved fold. Here, we report that an N-terminal extension that is proximal to the YTH domain enhances RNA binding. Using X-ray crystallography, NMR, and biophysical methods, we show that this low-complexity region becomes more ordered upon RNA binding. This enhances the affinity of the interaction of the Mmi1 YTH domain with specific RNAs by reducing the dissociation rate of the Mmi1-RNA complex. We propose that the low-complexity region influences RNA binding indirectly by reducing dynamic motions of the RNA-binding groove and stabilizing a conformation of the YTH domain that binds to RNA with high affinity. Taken together, our work reveals how a low-complexity region proximal to a conserved folded domain can adopt an ordered structure to aid nucleic acid binding. © 2018 Stowell et al.

Reflections on the role of open source in health information system interoperability.

PubMed

Sfakianakis, S; Chronaki, C E; Chiarugi, F; Conforti, F; Katehakis, D G

2007-01-01

This paper reflects on the role of open source in health information system interoperability. Open source is a driving force in computer science research and the development of information systems. It facilitates the sharing of information and ideas, enables evolutionary development and open collaborative testing of code, and broadens the adoption of interoperability standards. In health care, information systems have been developed largely ad hoc following proprietary specifications and customized design. However, the wide deployment of integrated services such as Electronic Health Records (EHRs) over regional health information networks (RHINs) relies on interoperability of the underlying information systems and medical devices. This reflection is built on the experiences of the PICNIC project that developed shared software infrastructure components in open source for RHINs and the OpenECG network that offers open source components to lower the implementation cost of interoperability standards such as SCP-ECG, in electrocardiography. Open source components implementing standards and a community providing feedback from real-world use are key enablers of health care information system interoperability. Investing in open source is investing in interoperability and a vital aspect of a long term strategy towards comprehensive health services and clinical research.

Past-behavioural versus situational questions in a postgraduate admissions multiple mini-interview: a reliability and acceptability comparison.

PubMed

Yoshimura, Hiroshi; Kitazono, Hidetaka; Fujitani, Shigeki; Machi, Junji; Saiki, Takuya; Suzuki, Yasuyuki; Ponnamperuma, Gominda

2015-04-14

The Multiple Mini-Interview (MMI) mostly uses 'Situational' Questions (SQs) as an interview format within a station, rather than 'Past-Behavioural' Questions (PBQs), which are most frequently adopted in traditional single-station personal interviews (SSPIs) for non-medical and medical selection. This study investigated reliability and acceptability of the postgraduate admissions MMI with PBQ and SQ interview formats within MMI stations. Twenty-six Japanese medical graduates, first completed the two-year national obligatory initial postgraduate clinical training programme and then applied to three specialty training programmes - internal medicine, general surgery, and emergency medicine - in a Japanese teaching hospital, where they underwent the Accreditation Council for Graduate Medical Education (ACGME)-competency-based MMI. This MMI contained five stations, with two examiners per station. In each station, a PBQ, and then an SQ were asked consecutively. PBQ and SQ interview formats were not separated into two different stations, or the order of questioning of PBQs and SQs in individual stations was not changed due to lack of space and experienced examiners. Reliability was analysed for the scores of these two MMI question types. Candidates and examiners were surveyed on this experience. The PBQ and SQ formats had generalisability coefficients of 0.822 and 0.821, respectively. With one examiner per station, seven stations could produce a reliability of more than 0.80 in both PBQ and SQ formats. More than 60% of both candidates and examiners felt positive about the overall candidates' ability. All participants liked the fairness of this MMI when compared with the previously experienced SSPI. SQs were perceived more favourable by candidates; in contrast, PBQs were perceived more relevant by examiners. Both PBQs and SQs are equally reliable and acceptable as station interview formats in the postgraduate admissions MMI. However, the use of the two formats within the same station, and with a fixed order, is not the best to maximise its utility as an admission test. Future studies are required to evaluate how best the SQs and PBQs should be combined as station interview formats to enhance reliability, feasibility, acceptability and predictive validity of the MMI.

Ocean Data Interoperability Platform (ODIP): developing a common global framework for marine data management through international collaboration

NASA Astrophysics Data System (ADS)

Glaves, Helen

2015-04-01

Marine research is rapidly moving away from traditional discipline specific science to a wider ecosystem level approach. This more multidisciplinary approach to ocean science requires large amounts of good quality, interoperable data to be readily available for use in an increasing range of new and complex applications. Significant amounts of marine data and information are already available throughout the world as a result of e-infrastructures being established at a regional level to manage and deliver marine data to the end user. However, each of these initiatives has been developed to address specific regional requirements and independently of those in other regions. Establishing a common framework for marine data management on a global scale necessitates that there is interoperability across these existing data infrastructures and active collaboration between the organisations responsible for their management. The Ocean Data Interoperability Platform (ODIP) project is promoting co-ordination between a number of these existing regional e-infrastructures including SeaDataNet and Geo-Seas in Europe, the Integrated Marine Observing System (IMOS) in Australia, the Rolling Deck to Repository (R2R) in the USA and the international IODE initiative. To demonstrate this co-ordinated approach the ODIP project partners are currently working together to develop several prototypes to test and evaluate potential interoperability solutions for solving the incompatibilities between the individual regional marine data infrastructures. However, many of the issues being addressed by the Ocean Data Interoperability Platform are not specific to marine science. For this reason many of the outcomes of this international collaborative effort are equally relevant and transferable to other domains.

Future Interoperability of Camp Protection Systems (FICAPS)

NASA Astrophysics Data System (ADS)

Caron, Sylvie; Gündisch, Rainer; Marchand, Alain; Stahl, Karl-Hermann

2013-05-01

The FICAPS Project has been established as a Project of the European Defence Agency based on an initiative of Germany and France. Goal of this Project was to derive Guidelines, which by a proper implementation in future developments improve Camp Protection Systems (CPS) by enabling and improving interoperability between Camp Protection Systems and its Equipments of different Nations involved in multinational missions. These Guidelines shall allow for: • Real-time information exchange between equipments and systems of different suppliers and nations (even via SatCom), • Quick and easy replacement of equipments (even of different Nations) at run-time in the field by means of plug and play capability, thus lowering the operational and logistic costs and making the system highly available, • Enhancement of system capabilities (open and modular systems) by adding new equipment with new capabilities (just plug-in, automatic adjustment of the HMI Human Machine Interface) without costly and time consuming validation and test on system level (validation and test can be done on Equipment level), Four scenarios have been identified to summarize the interoperability requirements from an operational viewpoint. To prove the definitions given in the Guideline Document, a French and a German Demonstration System, based on existing national assets, were realized. Demonstrations, showing the capabilities given by the defined interoperability requirements with respect to the operational scenarios, were performed. Demonstrations included remote control of a CPS by another CPS, remote sensor control (Electro-Optic/InfraRed EO/IR) and remote effector control. This capability can be applied to extend the protection area or to protect distant infrastructural assets Demonstrations have been performed. The required interoperability functionality was shown successfully. Even if the focus of the FICAPS project was on camp protection, the solution found is also appropriate for other force protection and ISR (Intelligence Surveillance Reconnaissance) tasks not only due to its flexibility but also due to the chosen interfacing.

e-Infrastructures for e-Sciences 2013 A CHAIN-REDS Workshop organised under the aegis of the European Commission

NASA Astrophysics Data System (ADS)

The CHAIN-REDS Project is organising a workshop on "e-Infrastructures for e-Sciences" focusing on Cloud Computing and Data Repositories under the aegis of the European Commission and in co-location with the International Conference on e-Science 2013 (IEEE2013) that will be held in Beijing, P.R. of China on October 17-22, 2013. The core objective of the CHAIN-REDS project is to promote, coordinate and support the effort of a critical mass of non-European e-Infrastructures for Research and Education to collaborate with Europe addressing interoperability and interoperation of Grids and other Distributed Computing Infrastructures (DCI). From this perspective, CHAIN-REDS will optimise the interoperation of European infrastructures with those present in 6 other regions of the world, both from a development and use point of view, and catering to different communities. Overall, CHAIN-REDS will provide input for future strategies and decision-making regarding collaboration with other regions on e-Infrastructure deployment and availability of related data; it will raise the visibility of e-Infrastructures towards intercontinental audiences, covering most of the world and will provide support to establish globally connected and interoperable infrastructures, in particular between the EU and the developing regions. Organised by IHEP, INFN and Sigma Orionis with the support of all project partners, this workshop will aim at: - Presenting the state of the art of Cloud computing in Europe and in China and discussing the opportunities offered by having interoperable and federated e-Infrastructures; - Exploring the existing initiatives of Data Infrastructures in Europe and China, and highlighting the Data Repositories of interest for the Virtual Research Communities in several domains such as Health, Agriculture, Climate, etc.

Medical School Performance of Socioeconomically Disadvantaged and Underrepresented Minority Students Matriculating after a Multiple Mini-Interview.

PubMed

Jerant, Anthony; Henderson, Mark C; Griffin, Erin; Talamantes, Efrain; Fancher, Tonya; Sousa, Francis; Franks, Peter

2018-01-01

Multiple Mini-Interviews (MMIs) are increasingly used in medical school admissions. We previously reported that while under-represented minority (URM) status was not associated with MMI scores, self-designated disadvantaged applicants had lower MMI scores, possibly affecting their matriculation prospects. No studies have examined how URM status or socioeconomic disadvantage (SED) are associated with academic performance following admission through an MMI. We examined the adjusted associations of MMI scores, SED, and URM status with U.S. Medical Licensing Examination Steps 1 and 2 performance and third-year clerkship Honors, measures affecting residency matching. While URM status was not associated with the measures, students with greater SED had lower Step 1 scores and fewer Honors. Students with higher MMI scores had more Step 1 failures, but more Honors. The findings identify areas to address in medical school admissions, student support, and evaluation processes, which is important given the need for a more representative physician workforce.

Can the multiple mini-interview predict academic achievement in medical school?

PubMed

Kim, Ja Kyoung; Kang, Seok Hoon; Lee, Hee Jae; Yang, JeongHee

2014-09-01

The purpose of this study was to determine whether the multiple mini-interview (MMI) predicts academic achievement for subjects in a medical school curriculum. Of 49 students who were admitted in 2008, 46 students finished the entire medical education curriculum within 4 years. We calculated the Pearson correlation coefficients between the total MMI score of the 46 graduates and their academic achievements in all subjects of the curriculum. The correlation coefficients between total MMI score and academic achievement in Medical Interview and History Taking, Problem-Based Learning, Doctoring I, and Clinical Practice of Surgery ranged from 0.4 to 0.7, indicating that they were moderately related. The values between total MMI score and achievement in Research Overview, Technical and Procedural Skills, Clinical Performance Examinations 1 and 3, Clinical Practice of Laboratory Medicine and Psychiatry, Neurology, and Orthopedics ranged from 0.2 to 0.4, which meant that they were weakly related. MMI score can predict medical student' academic achievement in subjects in the medical humanities and clinical practice.

M and S supporting unmanned autonomous systems (UAxS) concept development and experimentation

NASA Astrophysics Data System (ADS)

Biagini, Marco; Scaccianoce, Alfio; Corona, Fabio; Forconi, Sonia; Byrum, Frank; Fowler, Olivia; Sidoran, James L.

2017-05-01

The development of the next generation of multi-domain unmanned semi and fully autonomous C4ISR systems involves a multitude of security concerns and interoperability challenges. Conceptual solutions to capability shortfalls and gaps can be identified through Concept Development and Experimentation (CD and E) cycles. Modelling and Simulation (M and S) is a key tool in supporting unmanned autonomous systems (UAxS) CD and E activities and addressing associated security challenges. This paper serves to illustrate the application of M and S to UAxS development and highlight initiatives made by the North Atlantic Treaty Organization (NATO) M and S Centre of Excellence (CoE) to facilitate interoperability. The NATO M and S CoE collaborates with other NATO and Nations bodies in order to develop UAxS projects such as the Allied Command for Transformation Counter Unmanned Autonomous Systems (CUAxS) project or the work of Science and Technology Organization (STO) panels. Some initiatives, such as Simulated Interactive Robotics Initiative (SIRI) made the baseline for further developments and to study emerging technologies in M and S and robotics fields. Artificial Intelligence algorithm modelling, Robot Operating Systems (ROS), network operations, cyber security, interoperable languages and related data models are some of the main aspects considered in this paper. In particular, the implementation of interoperable languages like C-BML and NIEM MilOps are discussed in relation to a Command and Control - Simulation Interoperability (C2SIM) paradigm. All these technologies are used to build a conceptual architecture to support UAxS CD and E.In addition, other projects that the NATO M and S CoE is involved in, such as the NATO Urbanization Project could provide credible future operational environments and benefit UAxS project development, as dual application of UAxS technology in large urbanized areas.In conclusion, this paper contains a detailed overview regarding how applying Modelling and Simulation to support CD and E activities is a valid approach to develop and validate future capabilities requirements in general and next generation UAxS.

Mode/Medium Instability in CO2 Laser

NASA Technical Reports Server (NTRS)

Webster, K. L.; Sung, C. C.

1992-01-01

Report discribes theoretical study of model/medium instability (MMI) in CO2 laser. Purposes of study to extend, to small Fresnel numbers, previous study of MMI restricted to large Fresnel numbers and to study methods of previous studies, to suppress MMI. Method of primary interest involves replacement of hard edge output mirror in laser resonator with mirror, local reflectivity of which decreases with radial distance from optical axis according to Gaussian profile.

Toxicological considerations for antithyroid drugs in children.

PubMed

Karras, Spiros; Tzotzas, Themistoklis; Krassas, Gerasimos E

2011-04-01

Propylthiouracil (PTU), methimazole (MMI) and carbimazole are indicated for the treatment of hyperthyroidism in adult and pediatric patients. The aim of this review is to present all the relevant information regarding the use of antithyroid drugs (ATD) in pediatric thyrotoxic cases, the pediatric toxicology of ATD and the warning which has recently been issued for PTU by the FDA. Epidemiology, diagnosis and treatment of pediatric thyrotoxicosis are all presented in this article. The authors also extensively discuss the details regarding the pharmacology, bioactivation, biodisposition, bioavailability and pharmacokinetic properties of the two main ATD (MMI and PTU). The FDA recently reported that use of PTU is associated with a higher risk for clinically serious or fatal liver injury compared to MMI in both adult and pediatric patients. They also found that congenital malformations were reported approximately three times more often with prenatal exposure to MMI compared with PTU and especially with the use of MMI during the first trimester of pregnancy. The authors believe that PTU should not be used in pediatric patients unless the patient is allergic to or intolerant of MMI, and there are no other treatment options available. That being said, PTU may be the treatment of choice during, and just before, the first trimester of pregnancy.

Simulation of the novel compact structure of an interferometric biosensor based on multimode interference waveguides

NASA Astrophysics Data System (ADS)

Xhoxhi, Moisi; Dudia, Alma; Ymeti, Aurel

2017-05-01

We propose the novel structure of an interferometric biosensor based on multimode interference (MMI) waveguides. We present the design of the biosensor using eigenmode expansion (EME) method in accordance with the requirements and standards of today's photonic technology. The MMI structures with a 90 nm Si3N4 core are used as power splitters with 5 outputs. The 5 high-resolution images at the end of the multimode region show high power balance. We analyze the coupling efficiency of the laser source with the structure, the excess loss and power imbalance for different compact MMI waveguides with widths ranging from 45 μm to 15 μm. For a laser source with a tolerance of +/-1mm in linearization we could achieve a coupling efficiency of 52%. MMI waveguides with tapered channels show excess loss values under 0.5 dB and power imbalance values under 0.08 dB. In addition, we show that for a 10 nm deviation of the source wavelength from its optimal value and for a 10 μm deviation of the MMI length from its optimal value, the performance of the MMI waveguides remains acceptable. Finally, we analyze the power budget of the whole biosensor structure and show that it is sufficient for the proper operation of this device.

Embryonic exposure to propylthiouracil disrupts left-right patterning in Xenopus embryos.

PubMed

van Veenendaal, Nicole R; Ulmer, Bärbel; Boskovski, Marko T; Fang, Xiefan; Khokha, Mustafa K; Wendler, Christopher C; Blum, Martin; Rivkees, Scott A

2013-02-01

Antithyroid medications are the preferred therapy for the treatment of Graves' disease during pregnancy. Propylthiouracil (PTU) is favored over methimazole (MMI) due to potential teratogenic concerns with MMI. This study was to determine the teratogenic potential of MMI and PTU using a validated Xenopus tropicalis embryo model. Embryos were exposed to 1 mM PTU (EC(50)=0.88 mM), 1 mM MMI, or vehicle control (water) from stages 2 to 45. Treated embryos were examined for gross morphological defects, ciliary function, and gene expression by in situ hybridization. Exposure to PTU, but not MMI, led to cardiac and gut looping defects and shortening along the anterior-posterior axis. PTU exposure during gastrulation (stage 8-12.5) was identified as the critical period of exposure leading to left-right (LR) patterning defects. Abnormal cilia polarization, abnormal cilia-driven leftward flow at the gastrocoel roof plate (GRP), and aberrant expression of both Coco and Pitx2c were associated with abnormal LR symmetry observed following PTU exposure. PTU is teratogenic during late blastula, gastrulation, and neurulation; whereas MMI is not. PTU alters ciliary-driven flow and disrupts the normal genetic program involved in LR axis determination. These studies have important implications for women taking PTU during early pregnancy.

Multiple mini-interview as a predictor of performance in the objective structured clinical examination among Physician Associates in the United Kingdom: a cohort study

PubMed Central

Kumar, Narendra; Bhardwaj, Shailaja; Rahman, Eqram

2018-01-01

Introduction Patient satisfaction and health care outcomes are directly linked to useful communication skills. Therefore, excellent interpersonal skills are imperative for health care professionals. Multiple mini-interview (MMI) is designed as a selection tool to assess the communication skills of applicants in medical schools during the admission process. However, objective structured clinical examination (OSCE) assesses students’ communication and clinical skills at the end of their academic terms. Recently, Anglia Ruskin University, Chelmsford, UK, adopted MMI in the selection process for the first cohort of MSc Physician Associate trainees for the academic year 2015–2016. This study aimed to determine the likelihood of MMI as a predictor of future performance of communication skills in the OSCE. Materials and methods The anonymous data of the average scores of communication skills attained in MMI and OSCE at the end of year 1 were collected for 30 students from the Physician Associate program team. Subsequently, Pearson’s correlation was computed to determine the relationship between the average scores of communication skills attained in MMI, and OSCE during trimester 2 and trimester 3 by the Physician Associate trainees. Results The study showed positive correlation between the scores of communication skills attained in MMI and OSCE during trimester 2 (r=0.956, n=30, p<0.001) and trimester 3 (r=0.966, n=30, p<0.001). Conclusion The study provides empirical evidence for the validity of MMI as a predictor of future performance of Physician Associate trainees’ communication skills during subsequent OSCEs. PMID:29695944

A Multispectral Micro-Imager for Lunar Field Geology

NASA Technical Reports Server (NTRS)

Nunez, Jorge; Farmer, Jack; Sellar, Glenn; Allen, Carlton

2009-01-01

Field geologists routinely assign rocks to one of three basic petrogenetic categories (igneous, sedimentary or metamorphic) based on microtextural and mineralogical information acquired with a simple magnifying lens. Indeed, such observations often comprise the core of interpretations of geological processes and history. The Multispectral Microscopic Imager (MMI) uses multi-wavelength, light-emitting diodes (LEDs) and a substrate-removed InGaAs focal-plane array to create multispectral, microscale reflectance images of geological samples (FOV 32 X 40 mm). Each pixel (62.5 microns) of an image is comprised of 21 spectral bands that extend from 470 to 1750 nm, enabling the discrimination of a wide variety of rock-forming minerals, especially Fe-bearing phases. MMI images provide crucial context information for in situ robotic analyses using other onboard analytical instruments (e.g. XRD), or for the selection of return samples for analysis in terrestrial labs. To further assess the value of the MMI as a tool for lunar exploration, we used a field-portable, tripod-mounted version of the MMI to image a variety of Apollo samples housed at the Lunar Experiment Laboratory, NASA s Johnson Space Center. MMI images faithfully resolved the microtextural features of samples, while the application of ENVI-based spectral end member mapping methods revealed the distribution of Fe-bearing mineral phases (olivine, pyroxene and magnetite), along with plagioclase feldspars within samples. Samples included a broad range of lithologies and grain sizes. Our MMI-based petrogenetic interpretations compared favorably with thin section-based descriptions published in the Lunar Sample Compendium, revealing the value of MMI images for astronaut and rover-mediated lunar exploration.

Multiple mini-interview as a predictor of performance in the objective structured clinical examination among Physician Associates in the United Kingdom: a cohort study.

PubMed

Kumar, Narendra; Bhardwaj, Shailaja; Rahman, Eqram

2018-01-01

Patient satisfaction and health care outcomes are directly linked to useful communication skills. Therefore, excellent interpersonal skills are imperative for health care professionals. Multiple mini-interview (MMI) is designed as a selection tool to assess the communication skills of applicants in medical schools during the admission process. However, objective structured clinical examination (OSCE) assesses students' communication and clinical skills at the end of their academic terms. Recently, Anglia Ruskin University, Chelmsford, UK, adopted MMI in the selection process for the first cohort of MSc Physician Associate trainees for the academic year 2015-2016. This study aimed to determine the likelihood of MMI as a predictor of future performance of communication skills in the OSCE. The anonymous data of the average scores of communication skills attained in MMI and OSCE at the end of year 1 were collected for 30 students from the Physician Associate program team. Subsequently, Pearson's correlation was computed to determine the relationship between the average scores of communication skills attained in MMI, and OSCE during trimester 2 and trimester 3 by the Physician Associate trainees. The study showed positive correlation between the scores of communication skills attained in MMI and OSCE during trimester 2 ( r =0.956, n=30, p <0.001) and trimester 3 ( r =0.966, n=30, p <0.001). The study provides empirical evidence for the validity of MMI as a predictor of future performance of Physician Associate trainees' communication skills during subsequent OSCEs.

Should efforts in favor of medical student diversity be focused during admissions or farther upstream?

PubMed

Reiter, Harold I; Lockyer, Jocelyn; Ziola, Barry; Courneya, Carol-Ann; Eva, Kevin

2012-04-01

Traditional medical school admissions assessment tools may be limiting diversity. This study investigates whether the Multiple Mini-Interview (MMI) is diversity-neutral and, if so, whether applying it with greater weight would dilute the anticipated negative impact of diversity-limiting admissions measures. Interviewed applicants to six medical schools in 2008 and 2009 underwent MMI. Predictor variables of MMI scores, grade point average (GPA), and Medical College Admission Test (MCAT) scores were correlated with diversity measures of age, gender, size of community of origin, income level, and self-declared aboriginal status. A subset of the data was then combined with variable weight assigned to predictor variables to determine whether weighting during the applicant selection process would affect diversity among chosen applicants. MMI scores were unrelated to gender, size of community of origin, and income level. They correlated positively with age and negatively with aboriginal status. GPA and MCAT correlated negatively with age and aboriginal status, GPA correlated positively with income level, and MCAT correlated positively with size of community of origin. Even extreme combinations of MMI and GPA weightings failed to increase diversity among applicants who would be selected on the basis of weighted criteria. MMI could not neutralize the diversity-limiting properties of academic scores as selection criteria to interview. Using academic scores in this way causes range restriction, counteracting attempts to enhance diversity using downstream admissions selection measures such as MMI. Diversity efforts should instead be focused upstream. These results lend further support for the development of pipeline programs.

A Spectrum of Interoperability: The Site for Science Prototype for the NSDL; Re-Inventing the Wheel? Standards, Interoperability and Digital Cultural Content; Preservation Risk Management for Web Resources: Virtual Remote Control in Cornell's Project Prism; Safekeeping: A Cooperative Approach to Building a Digital Preservation Resource; Object Persistence and Availability in Digital Libraries; Illinois Digital Cultural Heritage Community-Collaborative Interactions among Libraries, Museums and Elementary Schools.

ERIC Educational Resources Information Center

Arms, William Y.; Hillmann, Diane; Lagoze, Carl; Krafft, Dean; Marisa, Richard; Saylor, John; Terizzi, Carol; Van de Sompel, Herbert; Gill, Tony; Miller, Paul; Kenney, Anne R.; McGovern, Nancy Y.; Botticelli, Peter; Entlich, Richard; Payette, Sandra; Berthon, Hilary; Thomas, Susan; Webb, Colin; Nelson, Michael L.; Allen, B. Danette; Bennett, Nuala A.; Sandore, Beth; Pianfetti, Evangeline S.

2002-01-01

Discusses digital libraries, including interoperability, metadata, and international standards; Web resource preservation efforts at Cornell University; digital preservation at the National Library of Australia; object persistence and availability; collaboration among libraries, museums and elementary schools; Asian digital libraries; and a Web…

Advanced analysis of forest fire clustering

NASA Astrophysics Data System (ADS)

Kanevski, Mikhail; Pereira, Mario; Golay, Jean

2017-04-01

Analysis of point pattern clustering is an important topic in spatial statistics and for many applications: biodiversity, epidemiology, natural hazards, geomarketing, etc. There are several fundamental approaches used to quantify spatial data clustering using topological, statistical and fractal measures. In the present research, the recently introduced multi-point Morisita index (mMI) is applied to study the spatial clustering of forest fires in Portugal. The data set consists of more than 30000 fire events covering the time period from 1975 to 2013. The distribution of forest fires is very complex and highly variable in space. mMI is a multi-point extension of the classical two-point Morisita index. In essence, mMI is estimated by covering the region under study by a grid and by computing how many times more likely it is that m points selected at random will be from the same grid cell than it would be in the case of a complete random Poisson process. By changing the number of grid cells (size of the grid cells), mMI characterizes the scaling properties of spatial clustering. From mMI, the data intrinsic dimension (fractal dimension) of the point distribution can be estimated as well. In this study, the mMI of forest fires is compared with the mMI of random patterns (RPs) generated within the validity domain defined as the forest area of Portugal. It turns out that the forest fires are highly clustered inside the validity domain in comparison with the RPs. Moreover, they demonstrate different scaling properties at different spatial scales. The results obtained from the mMI analysis are also compared with those of fractal measures of clustering - box counting and sand box counting approaches. REFERENCES Golay J., Kanevski M., Vega Orozco C., Leuenberger M., 2014: The multipoint Morisita index for the analysis of spatial patterns. Physica A, 406, 191-202. Golay J., Kanevski M. 2015: A new estimator of intrinsic dimension based on the multipoint Morisita index. Pattern Recognition, 48, 4070-4081.

Candidate Evaluation Using Targeted Construct Assessment in the Multiple Mini-Interview: A Multifaceted Rasch Model Analysis.

PubMed

McLaughlin, Jacqueline E; Singer, David; Cox, Wendy C

2017-01-01

Construct: A 7-station multiple mini-interview (MMI) circuit was implemented and assessed for 214 candidates rated by 37 interviewers (N = 1,498 ratings). The MMI stations were designed to assess 6 specific constructs (adaptability, empathy, integrity, critical thinking, teamwork [receiving instruction], teamwork [giving instruction]) and one open station about the candidate's interest in the school. Despite the apparent benefits of the MMI, construct-irrelevant variance continues to be a topic of study. Refining the MMI to more effectively measure candidate ability is critical to improving our ability to identify and select candidates that are equipped for success within health professions education and the workforce. Each station assessed a single construct and was rated by a single interviewer who was provided only the name of the candidate and no additional information about the candidate's background, application, or prior academic performance. All interviewers received online and in-person training in the fall prior to the MMI and the morning of the MMI. A 3-facet multifaceted Rasch measurement analysis was completed to determine interviewer severity, candidate ability, and MMI station difficulty and examine how the model performed overall (e.g., rating scale). Altogether, the Rasch measures explained 62.84% of the variance in the ratings. Differences in candidate ability explained 45.28% of the variance in the data, whereas differences in interviewer severity explained 16.09% of the variance in the data. None of the interviewers had Infit or Outfit mean-square scores greater than 1.7, and only 2 (5.4%) had mean-square scores less than 0.5. The data demonstrated acceptable fit to the multifaceted Rasch measurement model. This work is the first of its kind in pharmacy and provides insight into the development of an MMI that provides useful and meaningful candidate assessment ratings for institutional decision making.

Low muscle mass and risk of type 2 diabetes in middle-aged and older adults: findings from the KoGES.

PubMed

Son, Jang Won; Lee, Seong Su; Kim, Sung Rae; Yoo, Soon Jib; Cha, Bong Yun; Son, Ho Young; Cho, Nam H

2017-05-01

Asians have a propensity to develop type 2 diabetes with a lower BMI than Western populations. This discrepancy may be due to differences in body fat and muscle mass for a given BMI. However, unlike adiposity, it is unclear whether muscle mass affects the risk of type 2 diabetes in Asian populations. We conducted a 2-yearly prospective assessment of 6895 participants who were free of diabetes at the baseline examination as part of the Korean Genome Epidemiology Study. The muscle mass index (MMI) was defined as the weight-adjusted appendicular skeletal muscle mass. Using Cox regression models, we evaluated the association between MMI and the risk of developing type 2 diabetes across sex-specific tertiles of MMI. Low muscle mass was defined as the sex-specific lowest tertile of MMI. Main covariates included age, sex, urban or rural residence, family history of diabetes, hypertension, smoking status, education level, monthly income, physical activity, alcohol consumption and diet. In addition, body fat mass, waist circumference and BMI were controlled as categorical variables. Obesity was defined as a BMI of ≥25 kg/m 2 or a waist circumference of ≥90 cm for men and ≥85 cm for women. During a median follow-up of 9.06 years, 1336 participants developed type 2 diabetes. At baseline, the mean age was 52.1 years and the mean BMI was 24.4 kg/m 2 . The mean MMI for men and women was 32.1% and 26.0%, respectively. There was an inverse association between MMI and the risk of type 2 diabetes. Multivariate-adjusted HRs for the risk of developing type 2 diabetes were 2.05 (95% CI 1.73, 2.43), 1.39 (95% CI 1.17, 1.66) and 1.0 from the lowest to highest sex-specific MMI tertile, with an HR of 1.35 (95% CI 1.26, 1.45) per SD decline in MMI. Further adjustments for fat mass, waist circumference and BMI as categorical variables did not modify the relationship (each p < 0.01). In BMI-stratified analyses, the population-attributable fraction of the lowest tertile of MMI for developing type 2 diabetes was increased by 11.9% in the non-obese group and 19.7% in the obese group. Low muscle mass as defined by MMI was associated with an increased risk of type 2 diabetes, independent of general obesity, in middle-aged and older Korean adults.

A passively mode locked thulium doped fiber laser using bismuth telluride deposited multimode interference

NASA Astrophysics Data System (ADS)

Jung, M.; Lee, J.; Song, W.; Lee, Y. L.; Lee, J. H.; Shin, W.

2016-05-01

We proposed a multimode interference (MMI) fiber based saturable absorber using bismuth telluride at  ∼2 μm region. Our MMI based saturable absorber was fabricated by fusion splicing with single mode fiber and null core fiber. The MMI functioned as both wavelength fixed filter and saturable absorber. The 3 dB bandwidth and insertion loss of MMI were 42 nm and 3.4 dB at wavelength of 1958 nm, respectively. We have also reported a passively mode locked thulium doped fiber laser operating at a wavelength of 1958 nm using a multimode interference. A temporal bandwidth of  ∼46 ps was experimentally obtained at a repetition rate of 8.58 MHz.

An optical mm-wave generation scheme by frequency octupling using a nested MMI

NASA Astrophysics Data System (ADS)

Shang, Lei; Wen, Aijun; Li, Bo; Wang, Tonggang; Chen, Yang; Li, Ming'an

2011-12-01

A novel method of a filterless optical millimeter-wave (MMW) signal generation with frequency octupling via a nested multimode interference (MMI) coupler is proposed for Radio-over-fiber systems. By setting the DC bias voltage applied to the central arms of MMI-b and MMI-c accurately, the optical carrier can be completely suppressed. The OSSR can be as high as about 58 dB without optical filter and the radio frequency spurious suppression ratio (RFSSR) exceeds 32 dB, which is the best result as we know. Simulation results suggest that when the generated optical mm-wave signal is transmitted along the standard single-mode fiber, the eye diagram is still opened after being transmitted over a 50 km fiber.

Ocean Data Interoperability Platform (ODIP): developing a common framework for global marine data management

NASA Astrophysics Data System (ADS)

Glaves, H. M.

2015-12-01

In recent years marine research has become increasingly multidisciplinary in its approach with a corresponding rise in the demand for large quantities of high quality interoperable data as a result. This requirement for easily discoverable and readily available marine data is currently being addressed by a number of regional initiatives with projects such as SeaDataNet in Europe, Rolling Deck to Repository (R2R) in the USA and the Integrated Marine Observing System (IMOS) in Australia, having implemented local infrastructures to facilitate the exchange of standardised marine datasets. However, each of these systems has been developed to address local requirements and created in isolation from those in other regions.Multidisciplinary marine research on a global scale necessitates a common framework for marine data management which is based on existing data systems. The Ocean Data Interoperability Platform project is seeking to address this requirement by bringing together selected regional marine e-infrastructures for the purposes of developing interoperability across them. By identifying the areas of commonality and incompatibility between these data infrastructures, and leveraging the development activities and expertise of these individual systems, three prototype interoperability solutions are being created which demonstrate the effective sharing of marine data and associated metadata across the participating regional data infrastructures as well as with other target international systems such as GEO, COPERNICUS etc.These interoperability solutions combined with agreed best practice and approved standards, form the basis of a common global approach to marine data management which can be adopted by the wider marine research community. To encourage implementation of these interoperability solutions by other regional marine data infrastructures an impact assessment is being conducted to determine both the technical and financial implications of deploying them alongside existing services. The associated best practice and common standards are also being disseminated to the user community through relevant accreditation processes and related initiatives such as the Research Data Alliance and the Belmont Forum.

A comparison of data interoperability approaches of fusion codes with application to synthetic diagnostics

NASA Astrophysics Data System (ADS)

Kruger, Scott; Shasharina, S.; Vadlamani, S.; McCune, D.; Holland, C.; Jenkins, T. G.; Candy, J.; Cary, J. R.; Hakim, A.; Miah, M.; Pletzer, A.

2010-11-01

As various efforts to integrate fusion codes proceed worldwide, standards for sharing data have emerged. In the U.S., the SWIM project has pioneered the development of the Plasma State, which has a flat-hierarchy and is dominated by its use within 1.5D transport codes. The European Integrated Tokamak Modeling effort has developed a more ambitious data interoperability effort organized around the concept of Consistent Physical Objects (CPOs). CPOs have deep hierarchies as needed by an effort that seeks to encompass all of fusion computing. Here, we discuss ideas for implementing data interoperability that is complementary to both the Plasma State and CPOs. By making use of attributes within the netcdf and HDF5 binary file formats, the goals of data interoperability can be achieved with a more informal approach. In addition, a file can be simultaneously interoperable to several standards at once. As an illustration of this approach, we discuss its application to the development of synthetic diagnostics that can be used for multiple codes.

INL Control System Situational Awareness Technology Annual Report 2012

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gordon Rueff; Bryce Wheeler; Todd Vollmer

The overall goal of this project is to develop an interoperable set of tools to provide a comprehensive, consistent implementation of cyber security and overall situational awareness of control and sensor network implementations. The operation and interoperability of these tools will fill voids in current technological offerings and address issues that remain an impediment to the security of control systems. This report provides an FY 2012 update on the Sophia, Mesh Mapper, Intelligent Cyber Sensor, and Data Fusion projects with respect to the year-two tasks and annual reporting requirements of the INL Control System Situational Awareness Technology report (July 2010).

Multispectral Microscopic Imager (MMI): Multispectral Imaging of Geological Materials at a Handlens Scale

NASA Astrophysics Data System (ADS)

Farmer, J. D.; Nunez, J. I.; Sellar, R. G.; Gardner, P. B.; Manatt, K. S.; Dingizian, A.; Dudik, M. J.; McDonnell, G.; Le, T.; Thomas, J. A.; Chu, K.

2011-12-01

The Multispectral Microscopic Imager (MMI) is a prototype instrument presently under development for future astrobiological missions to Mars. The MMI is designed to be a arm-mounted rover instrument for use in characterizing the microtexture and mineralogy of materials along geological traverses [1,2,3]. Such geological information is regarded as essential for interpreting petrogenesis and geological history, and when acquired in near real-time, can support hypothesis-driven exploration and optimize science return. Correlated microtexure and mineralogy also provides essential data for selecting samples for analysis with onboard lab instruments, and for prioritizing samples for potential Earth return. The MMI design employs multispectral light-emitting diodes (LEDs) and an uncooled focal plane array to achieve the low-mass (<1kg), low-cost, and high reliability (no moving parts) required for an arm-mounted instrument on a planetary rover [2,3]. The MMI acquires multispectral, reflectance images at 62 μm/pixel, in which each image pixel is comprised of a 21-band VNIR spectrum (0.46 to 1.73 μm). This capability enables the MMI to discriminate and resolve the spatial distribution of minerals and textures at the microscale [2, 3]. By extending the spectral range into the infrared, and increasing the number of spectral bands, the MMI exceeds the capabilities of current microimagers, including the MER Microscopic Imager (MI); 4, the Phoenix mission Robotic Arm Camera (RAC; 5) and the Mars Science Laboratory's Mars Hand Lens Imager (MAHLI; 6). In this report we will review the capabilities of the MMI by highlighting recent lab and field applications, including: 1) glove box deployments in the Astromaterials lab at Johnson Space Center to analyze Apollo lunar samples; 2) GeoLab glove box deployments during the 2011 Desert RATS field trials in northern AZ to characterize analog materials collected by astronauts during simulated EVAs; 3) field deployments on Mauna Kea Volcano, Hawaii, during NASA's 2010 ISRU field trials, to analyze materials at the primary feedstock mining site; 4) lab characterization of geological samples from a complex, volcanic-hydrothermal terrain in the Cady Mts., SE Mojave Desert, California. We will show how field and laboratory applications have helped drive the development and refinement of MMI capabilities, while identifying synergies with other potential payload instruments (e.g. X-ray Diffraction) for solving real geological problems.

Reliability and acceptability of six station multiple mini-interviews: past-behavioural versus situational questions in postgraduate medical admission.

PubMed

Yamada, Toru; Sato, Juichi; Yoshimura, Hiroshi; Okubo, Tomoya; Hiraoka, Eiji; Shiga, Takashi; Kubota, Tadao; Fujitani, Shigeki; Machi, Junji; Ban, Nobutaro

2017-03-16

The multiple mini-interview (MMI) is increasingly used for postgraduate medical admissions and in undergraduate settings. MMIs use mostly Situational Questions (SQs) rather than Past-Behavioural Questions (PBQs). A previous study of MMIs in this setting, where PBQs and SQs were asked in the same order, reported that the reliability of PBQs was non-inferior to SQs and that SQs were more acceptable to candidates. The order in which the questions are asked may affect reliability and acceptability of an MMI. This study investigated the reliability of an MMI using both PBQs and SQs, minimising question order bias. Acceptability of PBQs and SQs was also assessed. Forty candidates applying for a postgraduate medical admission for 2016-2017 were included; 24 examiners were used. The MMI consisted of six stations with one examiner per station; a PBQ and a SQ were asked at every station, and the order of questions was alternated between stations. Reliability was analysed for scores obtained for PBQs or SQs separately, and for both questions. A post-MMI survey was used to assess the acceptability of PBQs and SQs. The generalisability (G) coefficients for PBQs only, SQs only, and both questions were 0.87, 0.96, and 0.80, respectively. Decision studies suggested that a four-station MMI would also be sufficiently reliable (G-coefficients 0.82 and 0.94 for PBQs and SQs, respectively). In total, 83% of participants were satisfied with the MMI. In terms of face validity, PBQs were more acceptable than SQs for candidates (p = 0.01), but equally acceptable for examiners (88% vs. 83% positive responses for PBQs vs. SQs; p = 0.377). Candidates preferred PBQs to SQs when asked to choose one, though this difference was not significant (p = 0.081); examiners showed a clear preference for PBQs (p = 0.007). Reliability and acceptability of six-station MMI were good among 40 postgraduate candidates; modelling suggested that four stations would also be reliable. SQs were more reliable than PBQs. Candidates found PBQs more acceptable than SQs and examiners preferred PBQs when they had to choose between the two. Our findings suggest that it is better to ask both PBQs and SQs during an MMI to maximise acceptability.

Effect of antithyroid drug on chick embryos during the last week of development: delayed hatching and decreased cerebellar acetylcholinesterase activity.

PubMed

Haba, Gen; Nishigori, Hidekazu; Tezuka, Yu; Kagami, Keisuke; Sugiyama, Toru; Nishigori, Hideo

2011-11-01

Hypothyroid state during embryogenesis disturbs normal growth and brain development, influencing later life. To evaluate the harmful consequences of the state during embryogenesis using an animal model, we inhibited thyroid hormone biosynthesis in chick embryos by using methimazole (MMI). Typically, embryos were treated with MMI (20 µmol/egg) on day 14, and examined on specific days.  Of the control embryos, 94% hatched on day 21, whereas 0% and 60% of MMI-treated embryos hatched on days 21 and 24, respectively. MMI retarded the rates of bodyweight gain as well as liver and heart development, and delayed hatching. However, the external differences in appearance and differences in the weights of the newly hatched control chicks on day 21 and the MMI-treated chicks on day 24 were less obvious. Embryos treated with MMI exhibited increased mass in their brain parts on day 24. Most notably, the treatment resulted in a 1.35-fold increase in cerebellum weight compared to that of the untreated animals. Acetylcholinesterase activity in the cerebellum on the day of hatching decreased significantly to 0.85-fold that of the untreated controls. Thyroid hormone receptor β mRNA was detected from day 12 and dramatically expressed from day 19 to the day of hatching. The 'fertilized hen's egg-chick embryo-chick system' is an appropriate animal model for investigating the hypothyroid state during embryogenesis. Decreased cerebellar acetylcholinesterase activity after MMI treatment was assumed to relate to a mechanism of motor and cognitive deficits in congenital hypothyroidism. © 2011 The Authors. Journal of Obstetrics and Gynaecology Research © 2011 Japan Society of Obstetrics and Gynecology.

Science applications of a multispectral microscopic imager for the astrobiological exploration of Mars

USGS Publications Warehouse

Nunez, Jorge; Farmer, Jack; Sellar, R. Glenn; Swayze, Gregg A.; Blaney, Diana L.

2014-01-01

Future astrobiological missions to Mars are likely to emphasize the use of rovers with in situ petrologic capabilities for selecting the best samples at a site for in situ analysis with onboard lab instruments or for caching for potential return to Earth. Such observations are central to an understanding of the potential for past habitable conditions at a site and for identifying samples most likely to harbor fossil biosignatures. The Multispectral Microscopic Imager (MMI) provides multispectral reflectance images of geological samples at the microscale, where each image pixel is composed of a visible/shortwave infrared spectrum ranging from 0.46 to 1.73 μm. This spectral range enables the discrimination of a wide variety of rock-forming minerals, especially Fe-bearing phases, and the detection of hydrated minerals. The MMI advances beyond the capabilities of current microimagers on Mars by extending the spectral range into the infrared and increasing the number of spectral bands. The design employs multispectral light-emitting diodes and an uncooled indium gallium arsenide focal plane array to achieve a very low mass and high reliability. To better understand and demonstrate the capabilities of the MMI for future surface missions to Mars, we analyzed samples from Mars-relevant analog environments with the MMI. Results indicate that the MMI images faithfully resolve the fine-scale microtextural features of samples and provide important information to help constrain mineral composition. The use of spectral endmember mapping reveals the distribution of Fe-bearing minerals (including silicates and oxides) with high fidelity, along with the presence of hydrated minerals. MMI-based petrogenetic interpretations compare favorably with laboratory-based analyses, revealing the value of the MMI for future in situ rover-mediated astrobiological exploration of Mars.

Science applications of a multispectral microscopic imager for the astrobiological exploration of Mars.

PubMed

Núñez, Jorge I; Farmer, Jack D; Sellar, R Glenn; Swayze, Gregg A; Blaney, Diana L

2014-02-01

Future astrobiological missions to Mars are likely to emphasize the use of rovers with in situ petrologic capabilities for selecting the best samples at a site for in situ analysis with onboard lab instruments or for caching for potential return to Earth. Such observations are central to an understanding of the potential for past habitable conditions at a site and for identifying samples most likely to harbor fossil biosignatures. The Multispectral Microscopic Imager (MMI) provides multispectral reflectance images of geological samples at the microscale, where each image pixel is composed of a visible/shortwave infrared spectrum ranging from 0.46 to 1.73 μm. This spectral range enables the discrimination of a wide variety of rock-forming minerals, especially Fe-bearing phases, and the detection of hydrated minerals. The MMI advances beyond the capabilities of current microimagers on Mars by extending the spectral range into the infrared and increasing the number of spectral bands. The design employs multispectral light-emitting diodes and an uncooled indium gallium arsenide focal plane array to achieve a very low mass and high reliability. To better understand and demonstrate the capabilities of the MMI for future surface missions to Mars, we analyzed samples from Mars-relevant analog environments with the MMI. Results indicate that the MMI images faithfully resolve the fine-scale microtextural features of samples and provide important information to help constrain mineral composition. The use of spectral endmember mapping reveals the distribution of Fe-bearing minerals (including silicates and oxides) with high fidelity, along with the presence of hydrated minerals. MMI-based petrogenetic interpretations compare favorably with laboratory-based analyses, revealing the value of the MMI for future in situ rover-mediated astrobiological exploration of Mars. Mars-Microscopic imager-Multispectral imaging-Spectroscopy-Habitability-Arm instrument.

Should total hip arthroplasty femoral components be designed to subside? A radiostereometric analysis study of the Charnley Elite and Exeter stems.

PubMed

Alfaro-Adrián, J; Gill, H S; Murray, D W

2001-08-01

The Charnley Elite and the Exeter stems have different design concepts: The former is designed not to subside, whereas the latter is expected to subside. This radiostereometric analysis study compares the early migration of the 2 stems. For both implants, the 1st year migration was about 4 times faster than the 2nd year. The Exeter migration was predominantly distal (1 mm/y in the 1st year). It also showed slight collapse into valgus, and the head migrated slowly posteriorly (0.3 mm/y in the 1st year). In contrast, the Elite had slow distal migration (0.2 mm/y in the 1st year) and rapid posterior head migration (0.8 mm/y in the 1st year). Four Elites and no Exeters had rapid posterior head migration rates (mean 2.8 mm/y in the 1st year and 0.8 mm/y in the 2nd year). The Elite and the Exeter stems have fundamentally different early patterns of migration, which affect their long-term function; 20% of the Elites and none of the Exeters had rapid posterior head migration in the 1st year and the 2nd year and are likely to fail early. Polished, collarless, tapered designs, such as the Exeter, may be more forgiving than conventional stems designed not to subside.

Can Multiple Mini-Interviews Predict Academic Performance of Dental Students? A Two-Year Follow-Up.

PubMed

Alaki, Sumer M; Yamany, Ibrahim A; Shinawi, Lana A; Hassan, Mona H A; Tekian, Ara

2016-11-01

Prior research has shown that students' previous grade point average (GPA) is the best predictor for future academic success. However, it can only partly predict the variability in dental school performance. The aim of this study was to assess the predictive value of multiple mini-interviews (MMI) as an admission criterion by comparing them with the academic performance of dental students over a two-year period. All incoming undergraduate dental students at the King Abdulaziz University Faculty of Dentistry (KAUFD) during academic year 2013-14 were invited to participate in MMI. Students rotated through six objective structured clinical exam (OSCE)-like stations for 30 minutes total and were interviewed by two trained faculty interviewers at each station. The stations were focused on noncognitive skills thought to be essential to academic performance at KAUFD. The academic performance of these students was then followed for two years and linked to their MMI scores. A total of 146 students (71 males and 75 females) participated in an interview (response rate=92.9%). Most students scored in the acceptable range at each MMI station. Students' total MMI score, ambitions, and motives were significant predictors of GPA during the two years of follow-up (p<0.038 and p<0.001, respectively). In this study, MMI was found to be able to predict future academic performance of undergraduate dental students.

Remission of insulin autoimmune syndrome in a patient with Grave's disease by treatment with methimazole.

PubMed

Okabe, R; Inaba, M; Hosoi, M; Ishimura, E; Kumeda, Y; Nishizawa, Y; Morii, H

1999-06-01

The patient, a 24-year-old man, had suffered from hunger, sweating, tachycardia and palpitation for three years. He was diagnosed as having Graves' disease (GD) and treated with methimazole (MMI) for 3 months. He noted that palpitation and perspiration seemed to particularly occur when he was hungry, and thus he was examined to determine whether these symptoms were caused by hypoglycemia. As a markedly elevated immunoreactive insulin level and the presence of insulin antibody in serum were found, he was diagnosed as having insulin autoimmune syndrome (IAS). HLA typing revealed the patient to be positive for group Bw62/Cw4/DR4, which is reportedly a specific HLA type in MMI-treated euthyoroid GD patients with IAS. In spite of the continuation of MMI treatment, the % binding of IRI decreased and the hypoglycemic episode disappeared. In contrast to the previously reported MMI induced IAS in GD cases, MMI is unlikely to have exacerbated IAS in the present case, although his HLA combination is identical to that of the previous cases.

Proposal for fabrication-tolerant SOI polarization splitter-rotator based on cascaded MMI couplers and an assisted bi-level taper

PubMed Central

Wang, Jing; Qi, Minghao; Xuan, Yi; Huang, Haiyang; Li, You; Li, Ming; Chen, Xin; Jia, Qi; Sheng, Zhen; Wu, Aimin; Li, Wei; Wang, Xi; Zou, Shichang; Gan, Fuwan

2014-01-01

A novel silicon-on-insulator (SOI) polarization splitter-rotator (PSR) with a large fabrication tolerance is proposed based on cascaded multimode interference (MMI) couplers and an assisted mode-evolution taper. The tapers are designed to adiabatically convert the input TM0 mode into the TE1 mode, which will output as the TE0 mode after processed by the subsequent MMI mode converter, 90-degree phase shifter (PS) and MMI 3 dB coupler. The numerical simulation results show that the proposed device has a < 0.5 dB insertion loss with < −17 dB crosstalk in C optical communication band. Fabrication tolerance analysis is also performed with respect to the deviations of MMI coupler width, PS width, slab height and upper-cladding refractive index, showing that this device could work well even when affected by considerable fabrication errors. With such a robust performance with a large bandwidth, this device offers potential applications for CMOS-compatible polarization diversity, especially in the booming 100 Gb/s coherent optical communications based on silicon photonics technology. PMID:25402029

Proposal for fabrication-tolerant SOI polarization splitter-rotator based on cascaded MMI couplers and an assisted bi-level taper.

PubMed

Wang, Jing; Qi, Minghao; Xuan, Yi; Huang, Haiyang; Li, You; Li, Ming; Chen, Xin; Jia, Qi; Sheng, Zhen; Wu, Aimin; Li, Wei; Wang, Xi; Zou, Shichang; Gan, Fuwan

2014-11-17

A novel silicon-on-insulator (SOI) polarization splitter-rotator (PSR) with a large fabrication tolerance is proposed based on cascaded multimode interference (MMI) couplers and an assisted mode-evolution taper. The tapers are designed to adiabatically convert the input TM(0) mode into the TE(1) mode, which will output as the TE(0) mode after processed by the subsequent MMI mode converter, 90-degree phase shifter (PS) and MMI 3 dB coupler. The numerical simulation results show that the proposed device has a < 0.5 dB insertion loss with < -17 dB crosstalk in C optical communication band. Fabrication tolerance analysis is also performed with respect to the deviations of MMI coupler width, PS width, slab height and upper-cladding refractive index, showing that this device could work well even when affected by considerable fabrication errors. With such a robust performance with a large bandwidth, this device offers potential applications for CMOS-compatible polarization diversity, especially in the booming 100 Gb/s coherent optical communications based on silicon photonics technology.

Comparison of automatic traps to capture mosquitoes (Diptera: Culicidae) in rural areas in the tropical Atlantic rainforest

PubMed Central

de Sá, Ivy Luizi Rodrigues; Sallum, Maria Anice Mureb

2013-01-01

In several countries, surveillance of insect vectors is accomplished with automatic traps. This study addressed the performance of Mosquito Magnet® Independence (MMI) in comparison with those of CDC with CO2 and lactic acid (CDC-A) and CDC light trap (CDC-LT). The collection sites were in a rural region located in a fragment of secondary tropical Atlantic rainforest, southeastern Brazil. Limatus durhami and Limatus flavisetosus were the dominant species in the MMI, whereas Ochlerotatus scapularis was most abundant in CDC-A. Culex ribeirensis and Culex sacchettae were dominant species in the CDC-LT. Comparisons among traps were based on diversity indices. Results from the diversity analyses showed that the MMI captured a higher abundance of mosquitoes and that the species richness estimated with it was higher than with CDC-LT. Contrasting, difference between MMI and CDC-A was not statistically significant. Consequently, the latter trap seems to be both an alternative for the MMI and complementary to it for ecological studies and entomological surveillance. PMID:24402154

Enabling Interoperability in Heliophysical Domains

NASA Astrophysics Data System (ADS)

Bentley, Robert

2013-04-01

There are many aspects of science in the Solar System that are overlapping - phenomena observed in one domain can have effects in other domains. However, there are many problems related to exploiting the data in cross-disciplinary studies because of lack of interoperability of the data and services. The CASSIS project is a Coordination Action funded under FP7 that has the objective of improving the interoperability of data and services related Solar System science. CASSIS has been investigating how the data could be made more accessible with some relatively minor changes to the observational metadata. The project has been looking at the services that are used within the domain and determining whether they are interoperable with each other and if not what would be required make them so. It has also been examining all types of metadata that are used when identifying and using observations and trying to make them more compliant with techniques and standards developed by bodies such as the International Virtual Observatory Alliance (IVOA). Many of the lessons that are being learnt in the study are applicable to domains that go beyond those directly involved in heliophysics. Adopting some simple standards related to the design of the services interfaces and metadata that are used would make it much easier to investigate interdisciplinary science topics. We will report on our finding and describe a roadmap for the future. For more information about CASSIS, please visit the project Web site on cassis-vo.eu

Medical Device Plug-and-Play Interoperability Standards & Technology Leadership

DTIC Science & Technology

2011-10-01

official Department of the Army position, policy or decision unless so designated by other documentation. REPORT DOCUMENTATION PAGE Form Approved...biomedical engineering students completed their senior design project on the X-Ray / Ventilator Use Case. We worked closely with the students to...Supporting Medical Device Adverse Event Analysis in an Interoperable Clinical Environment: Design of a Data Logging and Playback System,” Publication in

Difficulties with True Interoperability in Modeling & Simulation

DTIC Science & Technology

2011-12-01

2009. Programming Scala : Scalability = Functional Programming + Ob- jects. 1 st ed. O‟Reilly Media. 2652 Gallant and Gaughan AUTHOR BIOGRAPHIES...that develops a model or simulation has a specific purpose, set of requirements and limited funding. These programs cannot afford to coordinate with...implementation. The program offices should budget for and plan for coordination across domain projects within a limited scope to improve interoperability with

Semiconductor laser using multimode interference principle

NASA Astrophysics Data System (ADS)

Gong, Zisu; Yin, Rui; Ji, Wei; Wu, Chonghao

2018-01-01

Multimode interference (MMI) structure is introduced in semiconductor laser used in optical communication system to realize higher power and better temperature tolerance. Using beam propagation method (BPM), Multimode interference laser diode (MMI-LD) is designed and fabricated in InGaAsP/InP based material. As a comparison, conventional semiconductor laser using straight single-mode waveguide is also fabricated in the same wafer. With a low injection current (about 230 mA), the output power of the implemented MMI-LD is up to 2.296 mW which is about four times higher than the output power of the conventional semiconductor laser. The implemented MMI-LD exhibits stable output operating at the wavelength of 1.52 μm and better temperature tolerance when the temperature varies from 283.15 K to 293.15 K.

The modeling of MMI structures for signal processing applications

NASA Astrophysics Data System (ADS)

Le, Thanh Trung; Cahill, Laurence W.

2008-02-01

Microring resonators are promising candidates for photonic signal processing applications. However, almost all resonators that have been reported so far use directional couplers or 2×2 multimode interference (MMI) couplers as the coupling element between the ring and the bus waveguides. In this paper, instead of using 2×2 couplers, novel structures for microring resonators based on 3×3 MMI couplers are proposed. The characteristics of the device are derived using the modal propagation method. The device parameters are optimized by using numerical methods. Optical switches and filters using Silicon on Insulator (SOI) then have been designed and analyzed. This device can become a new basic component for further applications in optical signal processing. The paper concludes with some further examples of photonic signal processing circuits based on MMI couplers.

Ocean Data Interoperability Platform (ODIP): Developing a Common Framework for Marine Data Management on a Global Scale

NASA Astrophysics Data System (ADS)

Glaves, H. M.; Schaap, D.

2014-12-01

As marine research becomes increasingly multidisciplinary in its approach there has been a corresponding rise in the demand for large quantities of high quality interoperable data. A number of regional initiatives are already addressing this requirement through the establishment of e-infrastructures to improve the discovery and access of marine data. Projects such as Geo-Seas and SeaDataNet in Europe, Rolling Deck to Repository (R2R) in the USA and IMOS in Australia have implemented local infrastructures to facilitate the exchange of standardised marine datasets. However, each of these regional initiatives has been developed to address their own requirements and independently of other regions. To establish a common framework for marine data management on a global scale these is a need to develop interoperability solutions that can be implemented across these initiatives.Through a series of workshops attended by the relevant domain specialists, the Ocean Data Interoperability Platform (ODIP) project has identified areas of commonality between the regional infrastructures and used these as the foundation for the development of three prototype interoperability solutions addressing: the use of brokering services for the purposes of providing access to the data available in the regional data discovery and access services including via the GEOSS portal the development of interoperability between cruise summary reporting systems in Europe, the USA and Australia for routine harvesting of cruise data for delivery via the Partnership for Observation of Global Oceans (POGO) portal the establishment of a Sensor Observation Service (SOS) for selected sensors installed on vessels and in real-time monitoring systems using sensor web enablement (SWE) These prototypes will be used to underpin the development of a common global approach to the management of marine data which can be promoted to the wider marine research community. ODIP is a community lead project that is currently focussed on regional initiatives in Europe, the USA and Australia but which is seeking to expand this framework to include other regional marine data infrastructures.

Ultracompact photonic crystal polarization beam splitter based on multimode interference.

PubMed

Lu, Ming-Feng; Liao, Shan-Mei; Huang, Yang-Tung

2010-02-01

We propose a theoretical design for a compact photonic crystal (PC) polarization beam splitter (PBS) based on the multimode interference (MMI) effect. The size of a conventional MMI device designed by the self-imaging principle is not compact enough; therefore, we design a compact PC PBS based on the difference of the interference effect between TE and TM modes. Within the MMI coupler, the dependence of interference of modes on propagation distance is weak for a TE wave and strong for a TM wave; as a result, the length of the MMI section can be only seven lattice constants. Simulation results show that the insertion losses are 0.32 and 0.89 dB, and the extinction ratios are 14.4 and 17.5 dB for Port 1 (TE mode) and Port 2 (TM mode), respectively.

Multimode quantum interference of photons in multiport integrated devices

PubMed Central

Peruzzo, Alberto; Laing, Anthony; Politi, Alberto; Rudolph, Terry; O'Brien, Jeremy L.

2011-01-01

Photonics is a leading approach in realizing future quantum technologies and recently, optical waveguide circuits on silicon chips have demonstrated high levels of miniaturization and performance. Multimode interference (MMI) devices promise a straightforward implementation of compact and robust multiport circuits. Here, we show quantum interference in a 2×2 MMI coupler with visibility of V=95.6±0.9%. We further demonstrate the operation of a 4×4 port MMI device with photon pairs, which exhibits complex quantum interference behaviour. We have developed a new technique to fully characterize such multiport devices, which removes the need for phase-sensitive measurements and may find applications for a wide range of photonic devices. Our results show that MMI devices can operate in the quantum regime with high fidelity and promise substantial simplification and concatenation of photonic quantum circuits. PMID:21364563

Proposal of ultra-compact NAND/NOR/XNOR all-optical logic gates based on a nonlinear 3x1 multimode interference

NASA Astrophysics Data System (ADS)

Tajaldini, Mehdi; Mat Jafri, M. Z.

2014-05-01

We present a highly miniaturized multimode interference (MMI) coupler based on nonlinear modal propagation analysis (NMPA) method as a novel design method and potential application for optical NAND, NOR and XNOR logic gates for Boolean logic signal processing devices. Crystalline polydiacetylene is used to allow the appearances of nonlinear effects in low input intensities and ultra- short length to control the MMI coupler as an active device to access light switching due to its high nonlinear susceptibility. We consider a 10x33 μm2 MMI structure with three inputs and one output. Notably, the access facets are single-mode waveguides with sub-micron width. The center input contributes to control the induced light propagation in MMI by intensity variation whereas others could be launched by particular intensity when they are ON and 0 in OFF. Output intensity is analyzed in various sets of inputs to show the capability of Boolean logic gates, the contrast between ON and OFF is calculated on mentioned gates to present the efficiency. Good operation in low intensity and highly miniaturized MMI coupler is observed. Furthermore, nonlinear effects could be realized through the modal interferences. The issue of high insertion loss is addressed with a 3×3 upgraded coupler. Furthermore, the main significant aspect of this paper is simulating an MMI coupler that is launched by three nonlinear inputs, simultaneously, whereas last presents have never studied more than one input in nonlinear regimes.

Validity evidence for the Hamburg multiple mini-interview.

PubMed

Knorr, Mirjana; Schwibbe, Anja; Ehrhardt, Maren; Lackamp, Janina; Zimmermann, Stefan; Hampe, Wolfgang

2018-05-14

Multiple mini-interviews (MMI) become increasingly popular for the selection of medical students. In this work, we examine the validity evidence for the Hamburg MMI. We conducted three follow-up studies for the 2014 cohort of applicants to medical school over the course of two years. We calculated Spearman's rank correlation (ρ) between MMI results and (1) emotional intelligence measured by the Trait Emotional Intelligence Questionnaire (TEIQue-SF) and the Situational Test of Emotion Management (STEM), (2) supervisors' and practice team members' evaluations of psychosocial competencies and suitability for the medical profession after a one-week 1:1 teaching in a general practice (GP) and (3) objective structured clinical examination (OSCE) scores. There were no significant correlations between MMI results and the TEIQue-SF (ρ = .07, p > .05) or the STEM (ρ = .05, p > .05). MMI results could significantly predict GP evaluations of psychosocial competencies (ρ = .32, p < .05) and suitability for the medical profession (ρ = .42, p < .01) as well as OSCE scores (ρ = .23, p < .05). The MMI remained a significant predictor of these outcomes in a robust regression model including gender and age as control variables. Our findings suggest that MMIs can measure competencies that are relevant in a practical context. However, these competencies do not seem to be related to emotional intelligence as measured by self-report or situational judgement test.

Clinical data interoperability based on archetype transformation.

PubMed

Costa, Catalina Martínez; Menárguez-Tortosa, Marcos; Fernández-Breis, Jesualdo Tomás

2011-10-01

The semantic interoperability between health information systems is a major challenge to improve the quality of clinical practice and patient safety. In recent years many projects have faced this problem and provided solutions based on specific standards and technologies in order to satisfy the needs of a particular scenario. Most of such solutions cannot be easily adapted to new scenarios, thus more global solutions are needed. In this work, we have focused on the semantic interoperability of electronic healthcare records standards based on the dual model architecture and we have developed a solution that has been applied to ISO 13606 and openEHR. The technological infrastructure combines reference models, archetypes and ontologies, with the support of Model-driven Engineering techniques. For this purpose, the interoperability infrastructure developed in previous work by our group has been reused and extended to cover the requirements of data transformation. Copyright © 2011 Elsevier Inc. All rights reserved.

Large scale healthcare data integration and analysis using the semantic web.

PubMed

Timm, John; Renly, Sondra; Farkash, Ariel

2011-01-01

Healthcare data interoperability can only be achieved when the semantics of the content is well defined and consistently implemented across heterogeneous data sources. Achieving these objectives of interoperability requires the collaboration of experts from several domains. This paper describes tooling that integrates Semantic Web technologies with common tools to facilitate cross-domain collaborative development for the purposes of data interoperability. Our approach is divided into stages of data harmonization and representation, model transformation, and instance generation. We applied our approach on Hypergenes, an EU funded project, where we use our method to the Essential Hypertension disease model using a CDA template. Our domain expert partners include clinical providers, clinical domain researchers, healthcare information technology experts, and a variety of clinical data consumers. We show that bringing Semantic Web technologies into the healthcare interoperability toolkit increases opportunities for beneficial collaboration thus improving patient care and clinical research outcomes.

Sharing and interoperation of Digital Dongying geospatial data

NASA Astrophysics Data System (ADS)

Zhao, Jun; Liu, Gaohuan; Han, Lit-tao; Zhang, Rui-ju; Wang, Zhi-an

2006-10-01

Digital Dongying project was put forward by Dongying city, Shandong province, and authenticated by Ministry of Information Industry, Ministry of Science and Technology and Ministry of Construction P.R.CHINA in 2002. After five years of building, informationization level of Dongying has reached to the advanced degree. In order to forward the step of digital Dongying building, and to realize geospatial data sharing, geographic information sharing standards are drawn up and applied into realization. Secondly, Digital Dongying Geographic Information Sharing Platform has been constructed and developed, which is a highly integrated platform of WEBGIS. 3S (GIS, GPS, RS), Object oriented RDBMS, Internet, DCOM, etc. It provides an indispensable platform for sharing and interoperation of Digital Dongying Geospatial Data. According to the standards, and based on the platform, sharing and interoperation of "Digital Dongying" geospatial data have come into practice and the good results have been obtained. However, a perfect leadership group is necessary for data sharing and interoperation.

The BACnet Campus Challenge - Part 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Masica, Ken; Tom, Steve

Here, the BACnet protocol was designed to achieve interoperability among building automation vendors and evolve over time to include new functionality as well as support new communication technologies such as the Ethernet and IP protocols as they became prevalent and economical in the market place. For large multi-building, multi-vendor campus environments, standardizing on the BACnet protocol as an implementation strategy can be a key component in meeting the challenge of an interoperable, flexible, and scalable building automation system. The interoperability of BACnet is especially important when large campuses with legacy equipment have DDC upgrades to facilities performed over different timemore » frames and use different contractors that install equipment from different vendors under the guidance of different campus HVAC project managers. In these circumstances, BACnet can serve as a common foundation for interoperability when potential variability exists in approaches to the design-build process by numerous parties over time. Likewise, BACnet support for a range of networking protocols and technologies can be a key strategy for achieving flexible and scalable automation systems as campuses and enterprises expand networking infrastructures using standard interoperable protocols like IP and Ethernet.« less

The BACnet Campus Challenge - Part 1

DOE PAGES

Masica, Ken; Tom, Steve

2015-12-01

Here, the BACnet protocol was designed to achieve interoperability among building automation vendors and evolve over time to include new functionality as well as support new communication technologies such as the Ethernet and IP protocols as they became prevalent and economical in the market place. For large multi-building, multi-vendor campus environments, standardizing on the BACnet protocol as an implementation strategy can be a key component in meeting the challenge of an interoperable, flexible, and scalable building automation system. The interoperability of BACnet is especially important when large campuses with legacy equipment have DDC upgrades to facilities performed over different timemore » frames and use different contractors that install equipment from different vendors under the guidance of different campus HVAC project managers. In these circumstances, BACnet can serve as a common foundation for interoperability when potential variability exists in approaches to the design-build process by numerous parties over time. Likewise, BACnet support for a range of networking protocols and technologies can be a key strategy for achieving flexible and scalable automation systems as campuses and enterprises expand networking infrastructures using standard interoperable protocols like IP and Ethernet.« less

Design and analysis of O-S-C triple band wavelength division demultiplexer using cascaded MMI couplers

NASA Astrophysics Data System (ADS)

Chack, Devendra; Kumar, V.; Raghuwanshi, Sanjeev Kumar; Singh, Dev Prakash

2017-01-01

Compact triple O-S-C band wavelength demultiplexer, which consists of series cascaded multimode interference (MMI) couplers has been carried out in this paper. The MMI coupler has been used to drop the wavelengths of 1510 nm and 1550 nm at bar port while the wavelength 1300 nm into the cross port. Then another MMI coupler has been designed to separate the wavelength 1510 nminto one port and wavelength 1550 nm into another port. The triple wavelength demultiplexer function has been performed by choosing a suitable refractive index of the guiding region and geometrical parameters such as the width and length of MMI coupler. Numerical simulation with finite difference beam propagation method (BPM) has been utilized to design and optimize the operation of the proposed triple wavelength demultiplexer. The simulation results show that insertion losses of wavelength O, S and C, bands are 1.884 dB, 1.452 dB and 2.568 dB, respectively, with isolations for each output waveguide ranging from 10 dB to 28.72 dB. The 3-dB bandwidth of insertion loss for 1300 nm, 1510 nm and 1550 nm are 80 nm, 20 nm and 10 nm, respectively.

Wide range optofluidically tunable multimode interference fiber laser

NASA Astrophysics Data System (ADS)

Antonio-Lopez, J. E.; Sanchez-Mondragon, J. J.; LiKamWa, P.; May-Arrioja, D. A.

2014-08-01

An optofluidically tunable fiber laser based on multimode interference (MMI) effects with a wide tuning range is proposed and demonstrated. The tunable mechanism is based on an MMI fiber filter fabricated using a special fiber known as no-core fiber, which is a multimode fiber (MMF) without cladding. Therefore, when the MMI filter is covered by liquid the optical properties of the no-core fiber are modified, which allow us to tune the peak wavelength response of the MMI filter. Rather than applying the liquid on the entire no-core fiber, we change the liquid level along the no-core fiber, which provides a highly linear tuning response. In addition, by selecting the adequate refractive index of the liquid we can also choose the tuning range. We demonstrate the versatility of the optofluidically tunable MMI filter by wavelength tuning two different gain media, erbium doped fiber and a semiconductor optical amplifier, achieving tuning ranges of 55 and 90 nm respectively. In both cases, we achieve side-mode suppression ratios (SMSR) better than 50 dBm with output power variations of less than 0.76 dBm over the whole tuning range.

Two kinds of novel tunable Thulium-doped fiber laser

NASA Astrophysics Data System (ADS)

Ma, Xiaowei; Chen, Daru; Feng, Gaofeng; Yang, Junyong

2014-11-01

Two kinds of tunable Thulium-doped fiber laser (TDFL) respectively using a Sagnac loop mirror and a novel tunable multimode interference (MMI) fiber filter are experimentally demonstrated. The TDFL with the Sagnac loop mirror made by a 145.5-cm polarization-maintaining fiber (PMF) can operate with stable dual-wavelength lasing or tunable single-wavelength lasing around 1860nm. Both stable dual-wavelength and tunable single-wavelength lasing are achieved by adjusting a polarization controller in the Sagnac loop mirror. The TDFL with a novel tunable MMI fiber filter formed by splicing a segment of a special no-core fiber that is an all silica fiber without fiber core to single mode fibers can achieve tuning range from 1813.52 nm to 1858.70 nm. The no-core fiber with a large diameter of 200 μm is gradually vertically covered by refractive index matching liquid, which leads to a wavelength tuning of the transmission peak of the MMI fiber filter. The relationship between the refractive index of the refractive index matching liquid and the peak wavelength shift of the MMI fiber filter is also discussed. Using the MMI fiber filter, a Thulium-doped fiber laser with a tuning range of 45.18 nm is demonstrated.

A microfluidic multi-injector for gradient generation.

PubMed

Chung, Bong Geun; Lin, Francis; Jeon, Noo Li

2006-06-01

This paper describes a microfluidic multi-injector (MMI) that can generate temporal and spatial concentration gradients of soluble molecules. Compared to conventional glass micropipette-based methods that generate a single gradient, the MMI exploits microfluidic integration and actuation of multiple pulsatile injectors to generate arbitrary overlapping gradients that have not previously been possible. The MMI device is fabricated in poly(dimethylsiloxane) (PDMS) using multi-layer soft lithography and consists of fluidic channels and control channels with pneumatically actuated on-chip barrier valves. Repetitive actuation of on-chip valves control pulsatile release of solution that establishes microscopic chemical gradients around the orifice. The volume of solution released per actuation cycle ranged from 30 picolitres to several hundred picolitres and increased linearly with the duration of valve opening. The shape of the measured gradient profile agreed closely with the simulated diffusion profile from a point source. Steady state gradient profiles could be attained within 10 minutes, or less with an optimized pulse sequence. Overlapping gradients from 2 injectors were generated and characterized to highlight the advantages of MMI over conventional micropipette assays. The MMI platform should be useful for a wide range of basic and applied studies on chemotaxis and axon guidance.

Overlapping-image multimode interference couplers with a reduced number of self-images for uniform and nonuniform power splitting

NASA Astrophysics Data System (ADS)

Bachmann, M.; Besse, P. A.; Melchior, H.

1995-10-01

Overlapping-image multimode interference (MMI) couplers, a new class of devices, permit uniform and nonuniform power splitting. A theoretical description directly relates coupler geometry to image intensities, positions, and phases. Among many possibilities of nonuniform power splitting, examples of 1 \\times 2 couplers with ratios of 15:85 and 28:72 are given. An analysis of uniform power splitters includes the well-known 2 \\times N and 1 \\times N MMI couplers. Applications of MMI couplers include mode filters, mode splitters-combiners, and mode converters.

Widely tunable erbium-doped fiber laser based on multimode interference effect.

PubMed

Castillo-Guzman, A; Antonio-Lopez, J E; Selvas-Aguilar, R; May-Arrioja, D A; Estudillo-Ayala, J; LiKamWa, P

2010-01-18

A widely tunable erbium-doped all-fiber laser has been demonstrated. The tunable mechanism is based on a novel tunable filter using multimode interference effects (MMI). The tunable MMI filter was applied to fabricate a tunable erbium-doped fiber laser via a standard ring cavity. A tuning range of 60 nm was obtained, ranging from 1549 nm to 1609 nm, with a signal to noise ratio of 40 dB. The tunable MMI filter mechanism is very simple and inexpensive, but also quite efficient as a wavelength tunable filter.

Science Applications of a Multispectral Microscopic Imager for the Astrobiological Exploration of Mars

PubMed Central

Farmer, Jack D.; Sellar, R. Glenn; Swayze, Gregg A.; Blaney, Diana L.

2014-01-01

Abstract Future astrobiological missions to Mars are likely to emphasize the use of rovers with in situ petrologic capabilities for selecting the best samples at a site for in situ analysis with onboard lab instruments or for caching for potential return to Earth. Such observations are central to an understanding of the potential for past habitable conditions at a site and for identifying samples most likely to harbor fossil biosignatures. The Multispectral Microscopic Imager (MMI) provides multispectral reflectance images of geological samples at the microscale, where each image pixel is composed of a visible/shortwave infrared spectrum ranging from 0.46 to 1.73 μm. This spectral range enables the discrimination of a wide variety of rock-forming minerals, especially Fe-bearing phases, and the detection of hydrated minerals. The MMI advances beyond the capabilities of current microimagers on Mars by extending the spectral range into the infrared and increasing the number of spectral bands. The design employs multispectral light-emitting diodes and an uncooled indium gallium arsenide focal plane array to achieve a very low mass and high reliability. To better understand and demonstrate the capabilities of the MMI for future surface missions to Mars, we analyzed samples from Mars-relevant analog environments with the MMI. Results indicate that the MMI images faithfully resolve the fine-scale microtextural features of samples and provide important information to help constrain mineral composition. The use of spectral endmember mapping reveals the distribution of Fe-bearing minerals (including silicates and oxides) with high fidelity, along with the presence of hydrated minerals. MMI-based petrogenetic interpretations compare favorably with laboratory-based analyses, revealing the value of the MMI for future in situ rover-mediated astrobiological exploration of Mars. Key Words: Mars—Microscopic imager—Multispectral imaging—Spectroscopy—Habitability—Arm instrument. Astrobiology 14, 132–169. PMID:24552233

Testbed for Satellite and Terrestrial Interoperability (TSTI)

NASA Technical Reports Server (NTRS)

Gary, J. Patrick

1998-01-01

Various issues associated with the "Testbed for Satellite and Terrestrial Interoperability (TSTI)" are presented in viewgraph form. Specific topics include: 1) General and specific scientific technical objectives; 2) ACTS experiment No. 118: 622 Mbps network tests between ATDNet and MAGIC via ACTS; 3) ATDNet SONET/ATM gigabit network; 4) Testbed infrastructure, collaborations and end sites in TSTI based evaluations; 5) the Trans-Pacific digital library experiment; and 6) ESDCD on-going network projects.

Harmonising phenomics information for a better interoperability in the rare disease field.

PubMed

Maiella, Sylvie; Olry, Annie; Hanauer, Marc; Lanneau, Valérie; Lourghi, Halima; Donadille, Bruno; Rodwell, Charlotte; Köhler, Sebastian; Seelow, Dominik; Jupp, Simon; Parkinson, Helen; Groza, Tudor; Brudno, Michael; Robinson, Peter N; Rath, Ana

2018-02-07

HIPBI-RD (Harmonising phenomics information for a better interoperability in the rare disease field) is a three-year project which started in 2016 funded via the E-Rare 3 ERA-NET program. This project builds on three resources largely adopted by the rare disease (RD) community: Orphanet, its ontology ORDO (the Orphanet Rare Disease Ontology), HPO (the Human Phenotype Ontology) as well as PhenoTips software for the capture and sharing of structured phenotypic data for RD patients. Our project is further supported by resources developed by the European Bioinformatics Institute and the Garvan Institute. HIPBI-RD aims to provide the community with an integrated, RD-specific bioinformatics ecosystem that will harmonise the way phenomics information is stored in databases and patient files worldwide, and thereby contribute to interoperability. This ecosystem will consist of a suite of tools and ontologies, optimized to work together, and made available through commonly used software repositories. The project workplan follows three main objectives: The HIPBI-RD ecosystem will contribute to the interpretation of variants identified through exome and full genome sequencing by harmonising the way phenotypic information is collected, thus improving diagnostics and delineation of RD. The ultimate goal of HIPBI-RD is to provide a resource that will contribute to bridging genome-scale biology and a disease-centered view on human pathobiology. Achievements in Year 1. Copyright © 2018. Published by Elsevier Masson SAS.

Effects of selenium on short-term control of hyperthyroidism due to Graves' disease treated with methimazole: results of a randomized clinical trial.

PubMed

Leo, M; Bartalena, L; Rotondo Dottore, G; Piantanida, E; Premoli, P; Ionni, I; Di Cera, M; Masiello, E; Sassi, L; Tanda, M L; Latrofa, F; Vitti, P; Marcocci, C; Marinò, M

2017-03-01

In spite of previous conflicting results, an adjuvant role of selenium in the treatment of Graves' disease (GD) hyperthyroidism has been proposed. To address this issue, a randomized clinical trial was carried out aimed at investigating whether selenium is beneficial on the short-term control of GD hyperthyroidism treated with methimazole (MMI). Thirty newly diagnosed hyperthyroid GD patients were randomly assigned to treatment with: (i) MMI or (ii) MMI plus selenium. Primary outcomes were: control of hyperthyroidism and clinical and biochemical manifestations of hyperthyroidism [heart rate, cholesterol, sex hormone-binding globulin (SHBG), hyperthyroidism symptoms] at 90 days. Baseline features of the two groups did not differ. Serum selenium at baseline was similar in the two groups and within the recommended range to define selenium sufficiency. Selenium increased with treatment in the MMI-selenium group and became significantly higher than in the MMI group. Serum malondialdehyde, a marker of oxidative stress, was similar in the two groups and decreased significantly with treatment, with no difference between groups. Administration of MMI was followed by a reduction of FT 3 and FT 4 , with no difference between groups. Heart rate, SHBG and symptoms of hyperthyroidism decreased, whereas total cholesterol increased in both groups with no difference between groups. Our study, carried out in a selenium-sufficient cohort of GD patients, failed to show an adjuvant role of selenium in the short-term control of hyperthyroidism. However, selenium might be beneficial in patients from selenium-deficient areas, as well as in the long-term outcome of antithyroid treatment.

Utility of a writing station in the multiple mini-interview.

PubMed

Raghavan, Malathi; Burnett, Margaret; Martin, Bruce D; Christensen, Heather; Young, Deborah G; Mackalski, Barbara; Aoki, Fred

2013-01-01

The multiple mini-interview (MMI) is a reliable and valid method of selecting applicants for admission to health professional schools on the basis of non-cognitive traits. Because the MMI is a series of short interview stations that applicants rotate through in coordinated sequence, it can potentially be resource intensive. However, the MMI design has room for innovation and efficiency. At the University of Manitoba Faculty of Medicine, a 10-minute unsupervised writing station (WS) was incorporated into the MMI to obtain a writing sample from each applicant, to increase the number of independent scores per applicant, and to increase the number of applicants interviewed per circuit without increasing interviewer numbers. One assessor evaluated all the writing samples and assigned a score ranging from 1 to 7. With the inclusion of a WS into an 11-station MMI, the faculty's capacity to interview applicants increased by 9% (from 297 to 324) without substantially increasing interviewer hours needed per day. For 1,257 applicants interviewed in 2008-2011, the mean WS score was 4.03 (SD=1.36), whereas applicants' mean of 10 oral station (OS) scores was 4.62 (SD=0.69). Correlations between WS score and mean OS score ranged from .16 to .27 (p<.01) over the four years. Because inter-station correlations for OS ranged from .01 to .37, the correlation of .21 between WS and mean OS scores for all four years combined appears reasonable. Institutions that want to effectively increase the capacity of their MMI process might consider adding a WS.

Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS) Project Subcommittee Final

NASA Technical Reports Server (NTRS)

Johnson, Chuck; Griner, James H.; Hayhurst, Kelly J.; Shively, Robert J.; Consiglio, Maria; Muller, Eric; Murphy, James; Kim, Sam

2012-01-01

UAS Integration in the NAS Project overview with details from each of the subprojects. Subprojects include: Communications, Certification, Integrated Test and Evaluation, Human Systems Integration, and Separation Assurance/Sense and Avoid Interoperability.

Thyroid organotypic rat and human cultures used to investigate drug effects on thyroid function, hormone synthesis and release pathways

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vickers, Alison E.M., E-mail: vickers_alison@allergan.com; Heale, Jason; Sinclair, John R.

Drug induced thyroid effects were evaluated in organotypic models utilizing either a rat thyroid lobe or human thyroid slices to compare rodent and human response. An inhibition of thyroid peroxidase (TPO) function led to a perturbation in the expression of key genes in thyroid hormone synthesis and release pathways. The clinically used thiourea drugs, methimazole (MMI) and 6-n-propyl-2-thioruacil (PTU), were used to evaluate thyroid drug response in these models. Inhibition of TPO occurred early as shown in rat thyroid lobes (2 h) and was sustained in both rat (24–48 h) and human (24 h) with ≥ 10 μM MMI. Thyroidmore » from rats treated with single doses of MMI (30–1000 mg/kg) exhibited sustained TPO inhibition at 48 h. The MMI in vivo thyroid concentrations were comparable to the culture concentrations (∼ 15–84 μM), thus demonstrating a close correlation between in vivo and ex vivo thyroid effects. A compensatory response to TPO inhibition was demonstrated in the rat thyroid lobe with significant up-regulation of genes involved in the pathway of thyroid hormone synthesis (Tpo, Dio1, Slc5a5, Tg, Tshr) and the megalin release pathway (Lrp2) by 24 h with MMI (≥ 10 μM) and PTU (100 μM). Similarly, thyroid from the rat in vivo study exhibited an up-regulation of Dio1, Slc5a5, Lrp2, and Tshr. In human thyroid slices, there were few gene expression changes (Slc5a5, ∼ 2-fold) and only at higher MMI concentrations (≥ 1500 μM, 24 h). Extended exposure (48 h) resulted in up-regulation of Tpo, Dio1 and Lrp2, along with Slc5a5 and Tshr. In summary, TPO was inhibited by similar MMI concentrations in rat and human tissue, however an increased sensitivity to drug treatment in rat is indicated by the up-regulation of thyroid hormone synthesis and release gene pathways at concentrations found not to affect human tissue. -- Highlights: ► Novel model of rat thyroid or human thyroid slices to evaluate pathways of injury. ► TPO inhibition by MMI or PTU altered hormone synthesis and release genes. ► Rat thyroid was more sensitive to the drug effects than human tissue.« less

A federated semantic metadata registry framework for enabling interoperability across clinical research and care domains.

PubMed

Sinaci, A Anil; Laleci Erturkmen, Gokce B

2013-10-01

In order to enable secondary use of Electronic Health Records (EHRs) by bridging the interoperability gap between clinical care and research domains, in this paper, a unified methodology and the supporting framework is introduced which brings together the power of metadata registries (MDR) and semantic web technologies. We introduce a federated semantic metadata registry framework by extending the ISO/IEC 11179 standard, and enable integration of data element registries through Linked Open Data (LOD) principles where each Common Data Element (CDE) can be uniquely referenced, queried and processed to enable the syntactic and semantic interoperability. Each CDE and their components are maintained as LOD resources enabling semantic links with other CDEs, terminology systems and with implementation dependent content models; hence facilitating semantic search, much effective reuse and semantic interoperability across different application domains. There are several important efforts addressing the semantic interoperability in healthcare domain such as IHE DEX profile proposal, CDISC SHARE and CDISC2RDF. Our architecture complements these by providing a framework to interlink existing data element registries and repositories for multiplying their potential for semantic interoperability to a greater extent. Open source implementation of the federated semantic MDR framework presented in this paper is the core of the semantic interoperability layer of the SALUS project which enables the execution of the post marketing safety analysis studies on top of existing EHR systems. Copyright © 2013 Elsevier Inc. All rights reserved.

A VO-Driven Astronomical Data Grid in China

NASA Astrophysics Data System (ADS)

Cui, C.; He, B.; Yang, Y.; Zhao, Y.

2010-12-01

With the implementation of many ambitious observation projects, including LAMOST, FAST, and Antarctic observatory at Doom A, observational astronomy in China is stepping into a brand new era with emerging data avalanche. In the era of e-Science, both these cutting-edge projects and traditional astronomy research need much more powerful data management, sharing and interoperability. Based on data-grid concept, taking advantages of the IVOA interoperability technologies, China-VO is developing a VO-driven astronomical data grid environment to enable multi-wavelength science and large database science. In the paper, latest progress and data flow of the LAMOST, architecture of the data grid, and its supports to the VO are discussed.

Bilateral Medial Medullary Infarction with Nondominant Vertebral Artery Occlusion.

PubMed

Zhang, Lei; Zhang, Gui-lian; Du, Ju-mei; Ma, Zhu-lin

2015-09-01

Bilateral medial medullary infarction (MMI) is a rare stroke subtype. Here, we report a case with bilateral MMI caused by nondominant vertebral artery occlusion confirmed by brain digital subtraction angiography and magnetic resonance imaging basi-parallel-anatomical-scanning. We highlight that anterior spinal arteries could originate from a unilateral vertebral artery (VA). Radiologists and neurologists should pay attention to the nondominant VA as bilateral MMI may be induced by occlusion of nondominant VA that supplies the bilateral anteromedial territories of the medulla. Copyright © 2015 National Stroke Association. Published by Elsevier Inc. All rights reserved.

First experience with multiple mini interview for medical school admission in Brazil: Does it work in a different cultural scenario?

PubMed

Daniel-Filho, Durval Anibal; Pires, Elda Maria Stafuzza Gonçalves; Paes, Angela Tavares; Troster, Eduardo Juan; Silva, Simone Cristina Azevedo B S; Granato, Mariana Fachini; Couto, Thomaz Bittencourt; Barreto, Joyce Kelly Silva; Campos, Alexandre Holthausen; Monte, Julio C Martins; Schvartsman, Claudio

2017-10-01

Evaluation of non-cognitive skills never has been used in Brazil. This study aims to evaluate Multiple Mini Interviews (MMI) in the admission process of a School of Medicine in São Paulo, Brazil. The population of the study comprised 240 applicants summoned for the interviews, and 96 raters. MMI contributed to 25% of the applicants' final grade. Eight scenarios were created with the aim of evaluating different non-cognitive skills, each one had two raters. At the end of the interviews, the applicants and raters described their impressions about MMI. The reliability of the MMI was analyzed using the Theory of Generalization and Many-Facet Rasch Model (MFRM). The G-study showed that the general reliability of the process was satisfactory (coefficient G = 0.743). The MMI grades were not affected by the raters' profile, time of interview (p = 0.715), and randomization group (p = 0.353). The Rasch analysis showed that there was no misfitting effects or inconsistent stations or raters. A significant majority of the applicants (98%) and all the raters believed MMIs were important in selecting students with a more adequate profile to study medicine. The general reliability of the selection process was excellent, and it was fully accepted by the applicants and raters.

Assessment of Life Cycle Information Exchanges (LCie): Understanding the Value-Added Benefit of a COBie Process

DTIC Science & Technology

2013-10-01

exchange (COBie), Building Information Modeling ( BIM ), value-added analysis, business processes, project management 16. SECURITY CLASSIFICATION OF: 17...equipment. The innovative aspect of Building In- formation Modeling ( BIM ) is that it creates a computable building descrip- tion. The ability to use a...interoperability. In order for the building information to be interoperable, it must also con- form to a common data model , or schema, that defines the class

Analysis and design of arrayed waveguide gratings with MMI couplers.

PubMed

Munoz, P; Pastor, D; Capmany, J

2001-09-24

We present an extension of the AWG model and design procedure described in [1] to incorporate multimode interference, MMI, couplers. For the first time to our knowledge, a closed formula for the passing bands bandwidth and crosstalk estimation plots are derived.

A unified structural/terminological interoperability framework based on LexEVS: application to TRANSFoRm.

PubMed

Ethier, Jean-François; Dameron, Olivier; Curcin, Vasa; McGilchrist, Mark M; Verheij, Robert A; Arvanitis, Theodoros N; Taweel, Adel; Delaney, Brendan C; Burgun, Anita

2013-01-01

Biomedical research increasingly relies on the integration of information from multiple heterogeneous data sources. Despite the fact that structural and terminological aspects of interoperability are interdependent and rely on a common set of requirements, current efforts typically address them in isolation. We propose a unified ontology-based knowledge framework to facilitate interoperability between heterogeneous sources, and investigate if using the LexEVS terminology server is a viable implementation method. We developed a framework based on an ontology, the general information model (GIM), to unify structural models and terminologies, together with relevant mapping sets. This allowed a uniform access to these resources within LexEVS to facilitate interoperability by various components and data sources from implementing architectures. Our unified framework has been tested in the context of the EU Framework Program 7 TRANSFoRm project, where it was used to achieve data integration in a retrospective diabetes cohort study. The GIM was successfully instantiated in TRANSFoRm as the clinical data integration model, and necessary mappings were created to support effective information retrieval for software tools in the project. We present a novel, unifying approach to address interoperability challenges in heterogeneous data sources, by representing structural and semantic models in one framework. Systems using this architecture can rely solely on the GIM that abstracts over both the structure and coding. Information models, terminologies and mappings are all stored in LexEVS and can be accessed in a uniform manner (implementing the HL7 CTS2 service functional model). The system is flexible and should reduce the effort needed from data sources personnel for implementing and managing the integration.

A unified structural/terminological interoperability framework based on LexEVS: application to TRANSFoRm

PubMed Central

Ethier, Jean-François; Dameron, Olivier; Curcin, Vasa; McGilchrist, Mark M; Verheij, Robert A; Arvanitis, Theodoros N; Taweel, Adel; Delaney, Brendan C; Burgun, Anita

2013-01-01

Objective Biomedical research increasingly relies on the integration of information from multiple heterogeneous data sources. Despite the fact that structural and terminological aspects of interoperability are interdependent and rely on a common set of requirements, current efforts typically address them in isolation. We propose a unified ontology-based knowledge framework to facilitate interoperability between heterogeneous sources, and investigate if using the LexEVS terminology server is a viable implementation method. Materials and methods We developed a framework based on an ontology, the general information model (GIM), to unify structural models and terminologies, together with relevant mapping sets. This allowed a uniform access to these resources within LexEVS to facilitate interoperability by various components and data sources from implementing architectures. Results Our unified framework has been tested in the context of the EU Framework Program 7 TRANSFoRm project, where it was used to achieve data integration in a retrospective diabetes cohort study. The GIM was successfully instantiated in TRANSFoRm as the clinical data integration model, and necessary mappings were created to support effective information retrieval for software tools in the project. Conclusions We present a novel, unifying approach to address interoperability challenges in heterogeneous data sources, by representing structural and semantic models in one framework. Systems using this architecture can rely solely on the GIM that abstracts over both the structure and coding. Information models, terminologies and mappings are all stored in LexEVS and can be accessed in a uniform manner (implementing the HL7 CTS2 service functional model). The system is flexible and should reduce the effort needed from data sources personnel for implementing and managing the integration. PMID:23571850

Special issue on enabling open and interoperable access to Planetary Science and Heliophysics databases and tools

NASA Astrophysics Data System (ADS)

2018-01-01

The large amount of data generated by modern space missions calls for a change of organization of data distribution and access procedures. Although long term archives exist for telescopic and space-borne observations, high-level functions need to be developed on top of these repositories to make Planetary Science and Heliophysics data more accessible and to favor interoperability. Results of simulations and reference laboratory data also need to be integrated to support and interpret the observations. Interoperable software and interfaces have recently been developed in many scientific domains. The Virtual Observatory (VO) interoperable standards developed for Astronomy by the International Virtual Observatory Alliance (IVOA) can be adapted to Planetary Sciences, as demonstrated by the VESPA (Virtual European Solar and Planetary Access) team within the Europlanet-H2020-RI project. Other communities have developed their own standards: GIS (Geographic Information System) for Earth and planetary surfaces tools, SPASE (Space Physics Archive Search and Extract) for space plasma, PDS4 (NASA Planetary Data System, version 4) and IPDA (International Planetary Data Alliance) for planetary mission archives, etc, and an effort to make them interoperable altogether is starting, including automated workflows to process related data from different sources.

A SOA-Based Platform to Support Clinical Data Sharing.

PubMed

Gazzarata, R; Giannini, B; Giacomini, M

2017-01-01

The eSource Data Interchange Group, part of the Clinical Data Interchange Standards Consortium, proposed five scenarios to guide stakeholders in the development of solutions for the capture of eSource data. The fifth scenario was subdivided into four tiers to adapt the functionality of electronic health records to support clinical research. In order to develop a system belonging to the "Interoperable" Tier, the authors decided to adopt the service-oriented architecture paradigm to support technical interoperability, Health Level Seven Version 3 messages combined with LOINC (Logical Observation Identifiers Names and Codes) vocabulary to ensure semantic interoperability, and Healthcare Services Specification Project standards to provide process interoperability. The developed architecture enhances the integration between patient-care practice and medical research, allowing clinical data sharing between two hospital information systems and four clinical data management systems/clinical registries. The core is formed by a set of standardized cloud services connected through standardized interfaces, involving client applications. The system was approved by a medical staff, since it reduces the workload for the management of clinical trials. Although this architecture can realize the "Interoperable" Tier, the current solution actually covers the "Connected" Tier, due to local hospital policy restrictions.

Understanding reliability and some limitations of the images and spectra reconstructed from a multi-monochromatic x-ray imager

DOE PAGES

Nagayama, T.; Mancini, R. C.; Mayes, D.; ...

2015-11-18

Temperature and density asymmetry diagnosis is critical to advance inertial confinement fusion (ICF) science. A multi-monochromatic x-ray imager (MMI) is an attractive diagnostic for this purpose. The MMI records the spectral signature from an ICF implosion core with time resolution, 2-D space resolution, and spectral resolution. While narrow-band images and 2-D space-resolved spectra from the MMI data constrain temperature and density spatial structure of the core, the accuracy of the images and spectra depends not only on the quality of the MMI data but also on the reliability of the post-processing tools. In this paper, we synthetically quantify the accuracymore » of images and spectra reconstructed from MMI data. Errors in the reconstructed images are less than a few percent when the space-resolution effect is applied to the modeled images. The errors in the reconstructed 2-D space-resolved spectra are also less than a few percent except those for the peripheral regions. Spectra reconstructed for the peripheral regions have slightly but systematically lower intensities by ~6% due to the instrumental spatial-resolution effects. However, this does not alter the relative line ratios and widths and thus does not affect the temperature and density diagnostics. We also investigate the impact of the pinhole size variation on the extracted images and spectra. A 10% pinhole size variation could introduce spatial bias to the images and spectra of ~10%. A correction algorithm is developed, and it successfully reduces the errors to a few percent. Finally, it is desirable to perform similar synthetic investigations to fully understand the reliability and limitations of each MMI application.« less

Deeply etched MMI-based components on 4 μm thick SOI for SOA-based optical RAM cell circuits

NASA Astrophysics Data System (ADS)

Cherchi, Matteo; Ylinen, Sami; Harjanne, Mikko; Kapulainen, Markku; Aalto, Timo; Kanellos, George T.; Fitsios, Dimitrios; Pleros, Nikos

2013-02-01

We present novel deeply etched functional components, fabricated by multi-step patterning in the frame of our 4 μm thick Silicon on Insulator (SOI) platform based on singlemode rib-waveguides and on the previously developed rib-tostrip converter. These novel components include Multi-Mode Interference (MMI) splitters with any desired splitting ratio, wavelength sensitive 50/50 splitters with pre-filtering capability, multi-stage Mach-Zehnder Interferometer (MZI) filters for suppression of Amplified Spontaneous Emission (ASE), and MMI resonator filters. These novel building blocks enable functionalities otherwise not achievable on our SOI platform, and make it possible to integrate optical RAM cell layouts, by resorting to our technology for hybrid integration of Semiconductor Optical Amplifiers (SOAs). Typical SOA-based RAM cell layouts require generic splitting ratios, which are not readily achievable by a single MMI splitter. We present here a novel solution to this problem, which is very compact and versatile and suits perfectly our technology. Another useful functional element when using SOAs is the pass-band filter to suppress ASE. We pursued two complimentary approaches: a suitable interleaved cascaded MZI filter, based on a novel suitably designed MMI coupler with pre-filtering capabilities, and a completely novel MMI resonator concept, to achieve larger free spectral ranges and narrower pass-band response. Simulation and design principles are presented and compared to preliminary experimental functional results, together with scaling rules and predictions of achievable RAM cell densities. When combined with our newly developed ultra-small light-turning concept, these new components are expected to pave the way for high integration density of RAM cells.

The effect of personality traits on undergraduate dental students' performance in multiple mini interviews.

PubMed

Shinawi, Lana Ahmed; Alaki, Sumer Madani; Yamany, Ibrahim; Hassan, Mona Hassan Ahmed

2017-05-01

Multiple mini interviews (MMI) is a structured student selection method where applicants rotate around a series of stations that do not require previously learned knowledge. The Big Five Inventory (BFI) is a tool often used to measure personality traits commonly used in applicant selection. The aim of the current study was to assess the effect of personality traits using the BFI on undergraduate dental students' performance in MMI. This research was conducted at The Faculty of Dentistry, King Abdulaziz University, Jeddah, Saudi Arabia. All undergraduates applying to the dental program at King Abdulaziz University, Faculty of Dentistry (KAUFD) in two academic years [(2014-2015) and (2015-2016)] undertook the MMI held at KAUFD and completed the BFI inventory with a total number of 350 students. The MMI consisted of five stations while the BFI contained forty-four items. Data were analysed by SPSS version 20, using independent-samples t-test, Mann-Whitney U test, Spearman's rho correlation coefficient and Chi-square test. female students scored higher than their male counterparts but scores were only significant in the empathy station (p<0.001) in the first year, and in both empathetic skills and team work abilities (p<0.05) in the second. BFI results indicate that male students scored higher on agreeableness (p<0.003) and lower on neuroticism (p<0.001) in the first year while female students scored higher on agreeableness and conscientiousness (p<0.001) in the second year. Students of private schools had higher total MMI scores compared to those of public schools (p<0.05). MMI combined with the Big Five Inventory can be a useful tool in the admission process.

Acute Treatment with T-Type Calcium Channel Enhancer SAK3 Reduces Cognitive Impairments Caused by Methimazole-Induced Hypothyroidism Via Activation of Cholinergic Signaling.

PubMed

Husain, Noreen; Yabuki, Yasushi; Shinoda, Yasuharu; Fukunaga, Kohji

2018-01-01

Hypothyroidism is a common disorder that is associated with psychological disturbances such as dementia, depression, and psychomotor disorders. We recently found that chronic treatment with the T-type calcium channel enhancer SAK3 prevents the cholinergic neurodegeneration induced by a single intraperitoneal (i.p.) injection of methimazole (MMI; 75 mg/kg), thereby improving cognition. Here, we evaluated the acute effect of SAK3 on cognitive impairments and its mechanism of action following the induction of hypothyroidism. Hypothyroidism was induced by 2 injections of MMI (75 mg/kg, i.p.) administered once per week. Four weeks after the final MMI treatment, MMI-treated mice showed reduced serum thyroxine (T4) levels and cognitive impairments without depression-like behaviors. Although acute SAK3 (1.0 mg/kg, p.o.) administration failed to ameliorate the decreased T4 levels and histochemical destruction of the glomerular structure, acute SAK3 (1.0 mg/kg, p.o.) administration significantly reduced cognitive impairments in MMI-treated mice. Importantly, the α7 nicotinic acetylcholine receptor (nAChR)-selective inhibitor methyllycaconitine (MLA; 12 mg/kg, i.p.) and T-type calcium channel-specific blocker NNC 55-0396 (25 mg/kg, i.p.) antagonized the acute effect of SAK3 on memory deficits in MMI-treated mice. We also confirmed that acute SAK3 administration does not rescue reduced olfactory marker protein or choline acetyltransferase immunoreactivity levels in the olfactory bulb or medial septum. Taken together, these results suggest that SAK3 has the ability to improve the cognitive decline caused by hypothyroidism directly through activation of nAChR signaling and T-type calcium channels. © 2018 S. Karger AG, Basel.

Low elastic modulus Ti-Ta alloys for load-bearing permanent implants: enhancing the biodegradation resistance by electrochemical surface engineering.

PubMed

Kesteven, Jazmin; Kannan, M Bobby; Walter, Rhys; Khakbaz, Hadis; Choe, Han-Choel

2015-01-01

In this study, the in vitro degradation behaviour of titanium-tantalum (Ti-Ta) alloys (10-30 wt.% Ta) was investigated and compared with conventional implant materials, i.e., commercially pure titanium (Cp-Ti) and titanium-aluminium-vanadium (Ti6Al4V) alloy. Among the three Ti-Ta alloys studied, the Ti20Ta (6.3×10(-4) mm/y) exhibited the lowest degradation rate, followed by Ti30Ta (1.2×10(-3) mm/y) and Ti10Ta (1.4×10(-3) mm/y). All the Ti-Ta alloys exhibited lower degradation rate than that of Cp-Ti (1.8×10(-3) mm/y), which suggests that Ta addition to Ti is beneficial. As compared to Ti6Al4V alloy (8.1×10(-4) mm/y), the degradation rate of Ti20Ta alloy was lower by ~22%. However, the Ti30Ta alloy, which has closer elastic modulus to that of natural bone, showed ~48% higher degradation rate than that of Ti6Al4V alloy. Hence, to improve the degradation performance of Ti30Ta alloy, an intermediate thin porous layer was formed electrochemically on the alloy followed by calcium phosphate (CaP) electrodeposition. The coated Ti30Ta alloy (3.8×10(-3) mm/y) showed ~53% lower degradation rate than that of Ti6Al4V alloy. Thus, the study suggests that CaP coated Ti30Ta alloy can be a viable material for load-bearing permanent implants. Copyright © 2014 Elsevier B.V. All rights reserved.

Double-Blind, Placebo-Controlled, Randomized Trial of Selenium in Graves Hyperthyroidism.

PubMed

Kahaly, George J; Riedl, Michaela; König, Jochem; Diana, Tanja; Schomburg, Lutz

2017-11-01

Supplemental selenium (Se) may affect the clinical course of Graves disease (GD). Evaluate efficacy of add-on Se on medical treatment in GD. Double-blind, placebo-controlled, randomized supplementation trial. Academic endocrine outpatient clinic. Seventy untreated hyperthyroid patients with GD. Additionally to methimazole (MMI), patients received for 24 weeks either sodium selenite 300 µg/d po or placebo. MMI was discontinued at 24 weeks in euthyroid patients. Response rate (week 24), recurrence rate (week 36), and safety. A response was registered in 25 of 31 patients (80%) and in 27 of 33 (82%) at week 24 [odds ratio (OR) 0.93; 95% confidence interval (CI), 0.26 to 3.25; P = 0.904] in the Se (+MMI) and placebo (+MMI) groups, respectively. During a 12-week follow-up, 11 of 23 (48%) and 12 of 27 (44%) relapsed (OR 1.13; 95% CI, 0.29 to 2.66; P = 0.81) in the Se and placebo groups, respectively. Serum concentrations of Se and selenoprotein P were unrelated to response or recurrence rates. At week 36, 12 of 29 (41%) and 15 of 33 (45%) were responders and still in remission in the Se and placebo groups, respectively (OR 0.85; 95% CI, 0.31 to 2.32; P = 0.80). Serum levels of free triiodothyronine/free tetraiodothyronine, thyroid-stimulating hormone receptor antibody, prevalence of moderate to severe Graves orbitopathy, thyroid volume, and MMI starting dose were significantly lower in responders than in nonresponders. A total of 56 and 63 adverse events occurred in the Se and placebo groups, respectively (P = 0.164), whereas only one drug-related side effect (2.9%) was noted in 35 patients on placebo + MMI. Supplemental Se did not affect response or recurrence rates in GD. Copyright © 2017 Endocrine Society

Understanding reliability and some limitations of the images and spectra reconstructed from a multi-monochromatic x-ray imager

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nagayama, T.; Mancini, R. C.; Mayes, D.

2015-11-15

Temperature and density asymmetry diagnosis is critical to advance inertial confinement fusion (ICF) science. A multi-monochromatic x-ray imager (MMI) is an attractive diagnostic for this purpose. The MMI records the spectral signature from an ICF implosion core with time resolution, 2-D space resolution, and spectral resolution. While narrow-band images and 2-D space-resolved spectra from the MMI data constrain temperature and density spatial structure of the core, the accuracy of the images and spectra depends not only on the quality of the MMI data but also on the reliability of the post-processing tools. Here, we synthetically quantify the accuracy of imagesmore » and spectra reconstructed from MMI data. Errors in the reconstructed images are less than a few percent when the space-resolution effect is applied to the modeled images. The errors in the reconstructed 2-D space-resolved spectra are also less than a few percent except those for the peripheral regions. Spectra reconstructed for the peripheral regions have slightly but systematically lower intensities by ∼6% due to the instrumental spatial-resolution effects. However, this does not alter the relative line ratios and widths and thus does not affect the temperature and density diagnostics. We also investigate the impact of the pinhole size variation on the extracted images and spectra. A 10% pinhole size variation could introduce spatial bias to the images and spectra of ∼10%. A correction algorithm is developed, and it successfully reduces the errors to a few percent. It is desirable to perform similar synthetic investigations to fully understand the reliability and limitations of each MMI application.« less

Understanding reliability and some limitations of the images and spectra reconstructed from a multi-monochromatic x-ray imager.

PubMed

Nagayama, T; Mancini, R C; Mayes, D; Tommasini, R; Florido, R

2015-11-01

Temperature and density asymmetry diagnosis is critical to advance inertial confinement fusion (ICF) science. A multi-monochromatic x-ray imager (MMI) is an attractive diagnostic for this purpose. The MMI records the spectral signature from an ICF implosion core with time resolution, 2-D space resolution, and spectral resolution. While narrow-band images and 2-D space-resolved spectra from the MMI data constrain temperature and density spatial structure of the core, the accuracy of the images and spectra depends not only on the quality of the MMI data but also on the reliability of the post-processing tools. Here, we synthetically quantify the accuracy of images and spectra reconstructed from MMI data. Errors in the reconstructed images are less than a few percent when the space-resolution effect is applied to the modeled images. The errors in the reconstructed 2-D space-resolved spectra are also less than a few percent except those for the peripheral regions. Spectra reconstructed for the peripheral regions have slightly but systematically lower intensities by ∼6% due to the instrumental spatial-resolution effects. However, this does not alter the relative line ratios and widths and thus does not affect the temperature and density diagnostics. We also investigate the impact of the pinhole size variation on the extracted images and spectra. A 10% pinhole size variation could introduce spatial bias to the images and spectra of ∼10%. A correction algorithm is developed, and it successfully reduces the errors to a few percent. It is desirable to perform similar synthetic investigations to fully understand the reliability and limitations of each MMI application.

Smart Grid Demonstration Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, Craig; Carroll, Paul; Bell, Abigail

The National Rural Electric Cooperative Association (NRECA) organized the NRECA-U.S. Department of Energy (DOE) Smart Grid Demonstration Project (DE-OE0000222) to install and study a broad range of advanced smart grid technologies in a demonstration that spanned 23 electric cooperatives in 12 states. More than 205,444 pieces of electronic equipment and more than 100,000 minor items (bracket, labels, mounting hardware, fiber optic cable, etc.) were installed to upgrade and enhance the efficiency, reliability, and resiliency of the power networks at the participating co-ops. The objective of this project was to build a path for other electric utilities, and particularly electrical cooperatives,more » to adopt emerging smart grid technology when it can improve utility operations, thus advancing the co-ops’ familiarity and comfort with such technology. Specifically, the project executed multiple subprojects employing a range of emerging smart grid technologies to test their cost-effectiveness and, where the technology demonstrated value, provided case studies that will enable other electric utilities—particularly electric cooperatives— to use these technologies. NRECA structured the project according to the following three areas: Demonstration of smart grid technology; Advancement of standards to enable the interoperability of components; and Improvement of grid cyber security. We termed these three areas Technology Deployment Study, Interoperability, and Cyber Security. Although the deployment of technology and studying the demonstration projects at coops accounted for the largest portion of the project budget by far, we see our accomplishments in each of the areas as critical to advancing the smart grid. All project deliverables have been published. Technology Deployment Study: The deliverable was a set of 11 single-topic technical reports in areas related to the listed technologies. Each of these reports has already been submitted to DOE, distributed to co-ops, and posted for universal access at www.nreca.coop/smartgrid. This research is available for widespread distribution to both cooperative members and non-members. These reports are listed in Table 1.2. Interoperability: The deliverable in this area was the advancement of the MultiSpeak™ interoperability standard from version 4.0 to version 5.0, and improvement in the MultiSpeak™ documentation to include more than 100 use cases. This deliverable substantially expanded the scope and usability of MultiSpeak, ™ the most widely deployed utility interoperability standard, now in use by more than 900 utilities. MultiSpeak™ documentation can be accessed only at www.multispeak.org. Cyber Security: NRECA’s starting point was to develop cyber security tools that incorporated succinct guidance on best practices. The deliverables were: cyber security extensions to MultiSpeak,™ which allow more security message exchanges; a Guide to Developing a Cyber Security and Risk Mitigation Plan; a Cyber Security Risk Mitigation Checklist; a Cyber Security Plan Template that co-ops can use to create their own cyber security plans; and Security Questions for Smart Grid Vendors.« less

Enabling Interoperable Space Robots With the Joint Technical Architecture for Robotic Systems (JTARS)

NASA Technical Reports Server (NTRS)

Bradley, Arthur; Dubowsky, Steven; Quinn, Roger; Marzwell, Neville

2005-01-01

Robots that operate independently of one another will not be adequate to accomplish the future exploration tasks of long-distance autonomous navigation, habitat construction, resource discovery, and material handling. Such activities will require that systems widely share information, plan and divide complex tasks, share common resources, and physically cooperate to manipulate objects. Recognizing the need for interoperable robots to accomplish the new exploration initiative, NASA s Office of Exploration Systems Research & Technology recently funded the development of the Joint Technical Architecture for Robotic Systems (JTARS). JTARS charter is to identify the interface standards necessary to achieve interoperability among space robots. A JTARS working group (JTARS-WG) has been established comprising recognized leaders in the field of space robotics including representatives from seven NASA centers along with academia and private industry. The working group s early accomplishments include addressing key issues required for interoperability, defining which systems are within the project s scope, and framing the JTARS manuals around classes of robotic systems.

Ensuring Sustainable Data Interoperability Across the Natural and Social Sciences

NASA Astrophysics Data System (ADS)

Downs, R. R.; Chen, R. S.

2015-12-01

Both the natural and social science data communities are attempting to address the long-term sustainability of their data infrastructures in rapidly changing research, technological, and policy environments. Many parts of these communities are also considering how to improve the interoperability and integration of their data and systems across natural, social, health, and other domains. However, these efforts have generally been undertaken in parallel, with little thought about how different sustainability approaches may impact long-term interoperability from scientific, legal, or economic perspectives, or vice versa, i.e., how improved interoperability could enhance—or threaten—infrastructure sustainability. Scientific progress depends substantially on the ability to learn from the legacy of previous work available for current and future scientists to study, often by integrating disparate data not previously assembled. Digital data are less likely than scientific publications to be usable in the future unless they are managed by science-oriented repositories that can support long-term data access with the documentation and services needed for future interoperability. We summarize recent discussions in the social and natural science communities on emerging approaches to sustainability and relevant interoperability activities, including efforts by the Belmont Forum E-Infrastructures project to address global change data infrastructure needs; the Group on Earth Observations to further implement data sharing and improve data management across diverse societal benefit areas; and the Research Data Alliance to develop legal interoperability principles and guidelines and to address challenges faced by domain repositories. We also examine emerging needs for data interoperability in the context of the post-2015 development agenda and the expected set of Sustainable Development Goals (SDGs), which set ambitious targets for sustainable development, poverty reduction, and environmental stewardship by 2030. These efforts suggest the need for a holistic approach towards improving and implementing strategies, policies, and practices that will ensure long-term sustainability and interoperability of scientific data repositories and networks across multiple scientific domains.

47 CFR 90.548 - Interoperability Technical Standards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Standards, approved March 3, 2000, Telecommunications Industry Association, ANSI/TIA/EIA-102.BAEA-2000..., approved March 3, 2000, Telecommunications Industry Association, ANSI/TIA/EIA-102.BAEB-2000; Project 25..., approved March 3, 2000, Telecommunications Industry Association, ANSI/TIA/EIA-102.BAEE-2000; Project 25...

Federal Task Force on the Boston Central Artery Tunnel Project. Review of Project Oversight and Costs

DOT National Transportation Integrated Search

2012-01-01

Connected vehicles have the potential to transform the way Americans travel through the creation of a safe, interoperable wireless communications networka system that includes cars, buses, trucks, trains, traffic signals, cell phones, and other de...

Development of a Benthic Macroinvertebrate Multimetric Index (MMI) for Neotropical Savanna Headwater Streams

EPA Science Inventory

Assessing the ecological impacts of anthropogenic pressures is a key task in environmental management. Multimetric indices (MMIs), based on aquatic assemblage responses to anthropogenic pressures, have been used increasingly throughout the world. The MMI approach is a low-cost, r...

Demonstration of an optical phased array using electro-optic polymer phase shifters

NASA Astrophysics Data System (ADS)

Hirano, Yoshikuni; Motoyama, Yasushi; Tanaka, Katsu; Machida, Kenji; Yamada, Toshiki; Otomo, Akira; Kikuchi, Hiroshi

2018-03-01

We have been investigating an optical phased array (OPA) using electro-optic (EO) polymers in phase shifters to achieve ultrafast optical beam steering. In this paper, we describe the basic structures of the OPA using EO polymer phase shifters and show the beam steering capability of the OPA. The designed OPA has a multimode interference (MMI) beam splitter and 8-channel polymer waveguides with EO polymer phase shifters. We compare 1 × 8 MMI and cascaded 1 × 2 MMI beam splitters numerically and experimentally, and then obtain uniform intensity outputs from the 1 × 8 beam splitter. We fabricate the EO polymer OPA with a 1 × 8 MMI beam splitter to prevent intensity dispersion due to radiation loss in bending waveguides. We also evaluate the optical beam steering capability of the fabricated OPA and found a 2.7° deflection of far-field patterns when applying a voltage difference of 25 V in adjacent phase shifters.

Seismic Intensity, PGA and PGV for the South Napa Earthquake, August 24, 2014

NASA Astrophysics Data System (ADS)

Chen, S.; Pickering, A.; Mooney, W. D.; Crewdson, E.

2014-12-01

Numerous studies have investigated the statistical relationship between Modified Mercalli Intensity (MMI) and peak ground acceleration (PGA) and peak ground velocity (PGV). The Mw 6.0 South Napa (California) earthquake of August 24, 2014 provides valuable data to examine these relationships for both urban and rural environments within northern California. The finite fault model (D. Dreger, 2014) indicates that the fault rupture propagated predominantly NNW and up-dip from a 11-km-deep hypocenter. The epicentral location was 8 km SSW of downtown Napa. Recorded PGA north of the epicenter is as high as 600 cm/s2 and PGV locally reaches 80 cm/s. Field studies by two teams of investigators were conducted on August 24-26 and September 8-11, 2014 to assign MMI values at 108 sites. The highest MMI values are strongly localized along the NNW-SSE rupture trend north of the epicenter. Parts of the city of Napa and some communities several km farther north on Dry Creek Road were found to have experienced shaking intensities of MMI VII to VIII. The observed effects include houses moved off their foundations, chimney collapse or damage, cracked foundations and/or interior walls, broken windows, and the lateral displacement of heavy furniture. Communities to the east and west of this zone of high seismic intensity reported significantly lower values of MMI, typically IV and V even at distances as close as 10 km from the mapped surface rupture. In comparison with previous estimates by Wald et al. (1999) and Dangkua and Cramer (2011), we find that MMI III-VIII uniformly correspond to significantly larger (>150%) PGA and PGV values, as reported by the Center for Engineering Strong Motion Data (2014). We attribute this observation to two primary factors: (1) improved earthquake engineering in the post-Loma Prieta earthquake era that has led to building construction, both new and retrofitted, that is more resistant to earthquake strong ground motions; and (2) a frequency band relevant to these MMI estimates that contains less energy than that leading to the PGA or PGV values. The latter would primarily be a source effect.

Thyroid organotypic rat and human cultures used to investigate drug effects on thyroid function, hormone synthesis and release pathways.

PubMed

Vickers, Alison E M; Heale, Jason; Sinclair, John R; Morris, Stephen; Rowe, Josh M; Fisher, Robyn L

2012-04-01

Drug induced thyroid effects were evaluated in organotypic models utilizing either a rat thyroid lobe or human thyroid slices to compare rodent and human response. An inhibition of thyroid peroxidase (TPO) function led to a perturbation in the expression of key genes in thyroid hormone synthesis and release pathways. The clinically used thiourea drugs, methimazole (MMI) and 6-n-propyl-2-thioruacil (PTU), were used to evaluate thyroid drug response in these models. Inhibition of TPO occurred early as shown in rat thyroid lobes (2 h) and was sustained in both rat (24-48 h) and human (24 h) with ≥ 10 μM MMI. Thyroid from rats treated with single doses of MMI (30-1000 mg/kg) exhibited sustained TPO inhibition at 48 h. The MMI in vivo thyroid concentrations were comparable to the culture concentrations (~15-84 μM), thus demonstrating a close correlation between in vivo and ex vivo thyroid effects. A compensatory response to TPO inhibition was demonstrated in the rat thyroid lobe with significant up-regulation of genes involved in the pathway of thyroid hormone synthesis (Tpo, Dio1, Slc5a5, Tg, Tshr) and the megalin release pathway (Lrp2) by 24h with MMI (≥ 10 μM) and PTU (100 μM). Similarly, thyroid from the rat in vivo study exhibited an up-regulation of Dio1, Slc5a5, Lrp2, and Tshr. In human thyroid slices, there were few gene expression changes (Slc5a5, ~2-fold) and only at higher MMI concentrations (≥ 1500 μM, 24h). Extended exposure (48 h) resulted in up-regulation of Tpo, Dio1 and Lrp2, along with Slc5a5 and Tshr. In summary, TPO was inhibited by similar MMI concentrations in rat and human tissue, however an increased sensitivity to drug treatment in rat is indicated by the up-regulation of thyroid hormone synthesis and release gene pathways at concentrations found not to affect human tissue. Copyright © 2012 Elsevier Inc. All rights reserved.

Technical Data Interoperability (TDI) Pathfinder Via Emerging Standards

NASA Technical Reports Server (NTRS)

Conroy, Mike; Gill, Paul; Hill, Bradley; Ibach, Brandon; Jones, Corey; Ungar, David; Barch, Jeffrey; Ingalls, John; Jacoby, Joseph; Manning, Josh;

Arc-An OAI Service Provider for Digital Library Federation; Kepler-An OAI Data/Service Provider for the Individual; Information Objects and Rights Management: A Mediation-Based Approach to DRM Interoperability; Automated Name Authority Control and Enhanced Searching in the Levy Collection; Renardus Project Developments and the Wider Digital Library Context.

ERIC Educational Resources Information Center

Liu, Xiaoming; Maly, Kurt; Zubair, Mohammad; Nelson, Michael L.; Erickson, John S.; DiLauro, Tim; Choudhury, G. Sayeed; Patton, Mark; Warner, James W.; Brown, Elizabeth W.; Heery, Rachel; Carpenter, Leona; Day, Michael

2001-01-01

Includes five articles that discuss the OAI (Open Archive Initiative), an interface between data providers and service providers; information objects and digital rights management interoperability; digitizing library collections, including automated name authority control, metadata, and text searching engines; and building digital library services…

Long-wave infrared 1 × 2 MMI based on air-gap beneath silicon rib waveguides

NASA Astrophysics Data System (ADS)

Wei, Yuxin; Li, Guoyi; Hao, Yinlei; Li, Yubo; Yang, Jianyi; Wang, Minghua; Jiang, Xiaoqing

2011-08-01

The undercut long-wave infrared (LWIR) waveguide components with air-gap beneath are analyzed and fabricated on the Si-wafer with simple manufacturing process. A 1 × 2 multimode interference (MMI) splitter based on this structure is presented and measured under the 10.6μm wavelength experimental setup. The uniformity of the MMI fabricated is 0.76 dB. The relationship among the output power, slab thickness and air-gap width is also fully discussed. Furthermore, undercut straight waveguides based on SOI platform are fabricated for propagation loss evaluation. Ways to reduce the loss are discussed either.

Passive athermalization of multimode interference devices for wavelength-locking applications.

PubMed

Ruiz-Perez, Victor I; May-Arrioja, Daniel A; Guzman-Sepulveda, Jose R

2017-03-06

In this paper we demonstrate the passive, material-based athermalization of all-fiber architectures by cascading multimode interference (MMI) devices. In-line thermal compensation is achieved by including a liquid-core multimode section of variable length that allows ensuring temperature-independent operation while preserving the inherent filter-like spectral response of the MMI devices. The design of the temperature compensation unit is straightforward and its fabrication is simple. The applicability of our approach is experimentally verified by fabricating a wavelength-locked MMI laser with sensitivity of only -0.1 pm/°C, which is at least one order of magnitude lower than that achieved with other fiber optics devices.

The Talbot effect in a metamaterial

NASA Astrophysics Data System (ADS)

Nikkhah, H.; Hasan, M.; Hall, T. J.

2018-02-01

The effect of anisotropy and spatial dispersion of a metamaterial on the Talbot effect may be engineered in principle. This has profound implications for applications of the Talbot effect such as the design of a multimode interference coupler (MMI). The paper describes how a metamaterial can suppress the modal phase error which otherwise limits the scaling of MMI port dimension. A binary multilayer dielectric material described by the Kronig-Penney model is shown to provide a close approximation to the required dispersion relation. Results of simulations of a multi-slotted waveguide MMI engineered to provide a polarising beam splitter function are given as an example of the method.

Standardized exchange of clinical documents--towards a shared care paradigm in glaucoma treatment.

PubMed

Gerdsen, F; Müller, S; Jablonski, S; Prokosch, H-U

2006-01-01

The exchange of medical data from research and clinical routine across institutional borders is essential to establish an integrated healthcare platform. In this project we want to realize the standardized exchange of medical data between different healthcare institutions to implement an integrated and interoperable information system supporting clinical treatment and research of glaucoma. The central point of our concept is a standardized communication model based on the Clinical Document Architecture (CDA). Further, a communication concept between different health care institutions applying the developed document model has been defined. With our project we have been able to prove that standardized communication between an Electronic Medical Record (EMR), an Electronic Health Record (EHR) and the Erlanger Glaucoma Register (EGR) based on the established conceptual models, which rely on CDA rel.1 level 1 and SCIPHOX, could be implemented. The HL7-tool-based deduction of a suitable CDA rel.2 compliant schema showed significant differences when compared with the manually created schema. Finally fundamental requirements, which have to be implemented for an integrated health care platform, have been identified. An interoperable information system can enhance both clinical treatment and research projects. By automatically transferring screening findings from a glaucoma research project to the electronic medical record of our ophthalmology clinic, clinicians could benefit from the availability of a longitudinal patient record. The CDA as a standard for exchanging clinical documents has demonstrated its potential to enhance interoperability within a future shared care paradigm.

Incorporating Functional Image Information to rpFNA Analysis for Breast Cancer Detection in High-Risk Women

DTIC Science & Technology

2011-03-01

protocol. Unfortunately for this grant project, this approval has come too late to acquire human subjects. Nonetheless, the MMI Lab will continue to...Gaussian filter ) of 10X clinical activity concentration (0.36 µCi/mL) images acquired on Day 1 with (LEFT) VAOR, (CENTER) TPB and (RIGHT) PROJSINE...trajectories. (ROW 3) Coronal and (ROW 4) transverse slices (smoothed with a Gaussian filter ) showing the placement and size of the VOI used to

Buy Our Spares Smart Annual Report, Fiscal Year 1987.

DTIC Science & Technology

1988-01-19

by Mr. J. J. Genovese , serves as the single focal point for This annual report presents a detailed description implementing and guiding Project BOSS...participating commands or making 43 lyl’e ) p I 4COMPETITION CONTACT POINTS COMMAND ADVOCATE TELEPHONE Naval Supply Systems Command Mr. J.J. Genovese A...20) MMI Laredo Bell MM3 Frederick R. Schnieder STGI Michael D. Fleming EW3 David J. Shallo LT Jeffrey J. Grabarek BT2 Marshall L. Vorhies USS KITTY

Fabrication of 8×8 MMI optical coupler in BK7 by ion-exchange

NASA Astrophysics Data System (ADS)

Li, Xia; Li, Xi-Hua; Zhou, Qiang; Jiang, Xiao-Qing; Yang, Jian-Yi; Wang, Ming-Hua

2005-01-01

The planar waveguide optical couplers are of prime importance in optical communication and optical signal processing system. Comparing with the optical fiber coupler (OFC) which fabricated by fused biconical taper technology, the planar waveguide couplers are more compact size, lower loss, better uniformity, easier manufacture and integration. Multimode interference (MMI) couplers have many advantages, such as compact size, wavelength and polarization insensitivity, fabrication tolerances and low loss, etc., which concentrate more and more attention. Conventional MMI devices are based on the uniform index waveguides. When the number of input/output waveguides becomes larger, the intrinsic propagation constant error, which will cause bad uniformity of output power, can"t be neglected. In fact, most waveguide devices are graded-index. With the enhanced compatibility of MMI coupler, the performance can be improved at the same time. Prior study shows that graded-index MMI couplers reach the best performance under certain index contrast. Among many available materials, glass is chosen to be the substrate of the coupler, because of its good features, such as low loss, ease fabrication, cheap cost, and so on. In this paper, an 8×8 MMI optical coupler is designed based on the principle of graded-index MMI. The coupler is composed of a waveguide, which is designed to support a large number of modes, and several access (usually single-mode) waveguides, which are used to launch light into and recover light from that multimode waveguide. The total length of the device is less than 3.5 centimeter, including S-bends which lead the multiple images to the output of the device with the spacing D=250μm to make the device fiber compatible. In this paper, we describe an experimental realization of the 8×8 graded-index MMI optical coupler and the measurement of its performance with the testing laser of the wavelength of 1.55μm. The device is fabricated by ion-exchange on BK7 glass substrate. During the ion-exchange process, a melting mixture of AgNO3 : (KNO3 : NaNO3) (molar ratio, 0.001:1) is used at 350~380°C for different times (range from 8 to 18 hours) to fabricate the coupler. The experimental results show that the performance of the optical coupler is quite promising. For instance, while launching light from No.5 waveguide, the uniformity of the device is approximately 0.72dB. Optimization of design and fabrication is going on to improve the total performance of the optical coupler.

47 CFR 90.548 - Interoperability Technical Standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Specification—New Technology Standards Project—Digital Radio Technical Standards, approved March 2005. (v) ANSI/TIA-102.BAEE-B-2010, Project 25 Radio Management Protocols—New Technology Standards Project—Digital... 2003. (iii) ANSI/TIA-102.BAEA-B-2012, Project 25 Data Overview—New Technology Standards Project—Digital...

Ocean Data Interoperability Platform (ODIP): developing a common framework for marine data management on a global scale

NASA Astrophysics Data System (ADS)

Glaves, Helen; Schaap, Dick

2016-04-01

The increasingly ocean basin level approach to marine research has led to a corresponding rise in the demand for large quantities of high quality interoperable data. This requirement for easily discoverable and readily available marine data is currently being addressed by initiatives such as SeaDataNet in Europe, Rolling Deck to Repository (R2R) in the USA and the Australian Ocean Data Network (AODN) with each having implemented an e-infrastructure to facilitate the discovery and re-use of standardised multidisciplinary marine datasets available from a network of distributed repositories, data centres etc. within their own region. However, these regional data systems have been developed in response to the specific requirements of their users and in line with the priorities of the funding agency. They have also been created independently of the marine data infrastructures in other regions often using different standards, data formats, technologies etc. that make integration of marine data from these regional systems for the purposes of basin level research difficult. Marine research at the ocean basin level requires a common global framework for marine data management which is based on existing regional marine data systems but provides an integrated solution for delivering interoperable marine data to the user. The Ocean Data Interoperability Platform (ODIP/ODIP II) project brings together those responsible for the management of the selected marine data systems and other relevant technical experts with the objective of developing interoperability across the regional e-infrastructures. The commonalities and incompatibilities between the individual data infrastructures are identified and then used as the foundation for the specification of prototype interoperability solutions which demonstrate the feasibility of sharing marine data across the regional systems and also with relevant larger global data services such as GEO, COPERNICUS, IODE, POGO etc. The potential impact for the individual regional data infrastructures of implementing these prototype interoperability solutions is also being evaluated to determine both the technical and financial implications of their integration within existing systems. These impact assessments form part of the strategy to encourage wider adoption of the ODIP solutions and approach beyond the current scope of the project which is focussed on regional marine data systems in Europe, Australia, the USA and, more recently, Canada.

MMI Preparatory School Computerized Model Library.

ERIC Educational Resources Information Center

Everhart, Nancy

This booklet provides a detailed description of the computerization of the library of MMI Preparatory School, a private, non-sectarian college preparatory school in Pennsylvania for students in grades 7 through 12. Each of the following functions is investigated: (1) catalog card production; (2) online reference services; (3) circulation; (4) word…

Hidden Item Variance in Multiple Mini-Interview Scores

ERIC Educational Resources Information Center

Zaidi, Nikki L.; Swoboda, Christopher M.; Kelcey, Benjamin M.; Manuel, R. Stephen

2017-01-01

The extant literature has largely ignored a potentially significant source of variance in multiple mini-interview (MMI) scores by "hiding" the variance attributable to the sample of attributes used on an evaluation form. This potential source of hidden variance can be defined as rating items, which typically comprise an MMI evaluation…

Geoscience Information Network (USGIN) Solutions for Interoperable Open Data Access Requirements

NASA Astrophysics Data System (ADS)

Allison, M. L.; Richard, S. M.; Patten, K.

2014-12-01

The geosciences are leading development of free, interoperable open access to data. US Geoscience Information Network (USGIN) is a freely available data integration framework, jointly developed by the USGS and the Association of American State Geologists (AASG), in compliance with international standards and protocols to provide easy discovery, access, and interoperability for geoscience data. USGIN standards include the geologic exchange language 'GeoSciML' (v 3.2 which enables instant interoperability of geologic formation data) which is also the base standard used by the 117-nation OneGeology consortium. The USGIN deployment of NGDS serves as a continent-scale operational demonstration of the expanded OneGeology vision to provide access to all geoscience data worldwide. USGIN is developed to accommodate a variety of applications; for example, the International Renewable Energy Agency streams data live to the Global Atlas of Renewable Energy. Alternatively, users without robust data sharing systems can download and implement a free software packet, "GINstack" to easily deploy web services for exposing data online for discovery and access. The White House Open Data Access Initiative requires all federally funded research projects and federal agencies to make their data publicly accessible in an open source, interoperable format, with metadata. USGIN currently incorporates all aspects of the Initiative as it emphasizes interoperability. The system is successfully deployed as the National Geothermal Data System (NGDS), officially launched at the White House Energy Datapalooza in May, 2014. The USGIN Foundation has been established to ensure this technology continues to be accessible and available.

Interoperability of Electronic Health Records: A Physician-Driven Redesign.

PubMed

Miller, Holly; Johns, Lucy

2018-01-01

PURPOSE: Electronic health records (EHRs), now used by hundreds of thousands of providers and encouraged by federal policy, have the potential to improve quality and decrease costs in health care. But interoperability, although technically feasible among different EHR systems, is the weak link in the chain of logic. Interoperability is inhibited by poor understanding, by suboptimal implementation, and at times by a disinclination to dilute market share or patient base on the part of vendors or providers, respectively. The intent of this project has been to develop a series of practicable recommendations that, if followed by EHR vendors and users, can promote and enhance interoperability, helping EHRs reach their potential. METHODOLOGY: A group of 11 physicians, one nurse, and one health policy consultant, practicing from California to Massachusetts, has developed a document titled "Feature and Function Recommendations To Optimize Clinician Usability of Direct Interoperability To Enhance Patient Care" that offers recommendations from the clinician point of view. This report introduces some of these recommendations and suggests their implications for policy and the "virtualization" of EHRs. CONCLUSION: Widespread adoption of even a few of these recommendations by designers and vendors would enable a major advance toward the "Triple Aim" of improving the patient experience, improving the health of populations, and reducing per capita costs.

MyOcean Internal Information System (Dial-P)

NASA Astrophysics Data System (ADS)

Blanc, Frederique; Jolibois, Tony; Loubrieu, Thomas; Manzella, Giuseppe; Mazzetti, Paolo; Nativi, Stefano

2010-05-01

MyOcean is a three-year project (2008-2011) which goal is the development and pre-operational validation of the GMES Marine Core Service for ocean monitoring and forecasting. It's a transition project that will conduct the European "operational oceanography" community towards the operational phase of a GMES European service, which demands more European integration, more operationality, and more service. Observations, model-based data, and added-value products will be generated - and enhanced thanks to dedicated expertise - by the following production units: • Five Thematic Assembly Centers, each of them dealing with a specific set of observation data: Sea Level, Ocean colour, Sea Surface Temperature, Sea Ice & Wind, and In Situ data, • Seven Monitoring and Forecasting Centers to serve the Global Ocean, the Arctic area, the Baltic Sea, the Atlantic North-West shelves area, the Atlantic Iberian-Biscay-Ireland area, the Mediterranean Sea and the Black sea. Intermediate and final users will discover, view and get the products by means of a central web desk, a central re-active manned service desk and thematic experts distributed across Europe. The MyOcean Information System (MIS) is considering the various aspects of an interoperable - federated information system. Data models support data and computer systems by providing the definition and format of data. The possibility of including the information in the data file is depending on data model adopted. In general there is little effort in the actual project to develop a ‘generic' data model. A strong push to develop a common model is provided by the EU Directive INSPIRE. At present, there is no single de-facto data format for storing observational data. Data formats are still evolving, with their underlying data models moving towards the concept of Feature Types based on ISO/TC211 standards. For example, Unidata are developing the Common Data Model that can represent scientific data types such as point, trajectory, station, grid, etc., which will be implemented in netCDF format. SeaDataNet is recommending ODV and NetCDF formats. Another problem related to data curation and interoperability is the possibility to use common vocabularies. Common vocabularies are developed in many international initiatives, such as GEMET (promoted by INSPIRE as a multilingual thesaurus), UNIDATA, SeaDataNet, Marine Metadata Initiative (MMI). MIS is considering the SeaDataNet vocabulary as a base for interoperability. Four layers of different abstraction levels of interoperability an be defined: - Technical/basic: this layer is implemented at each TAC or MFC through internet connection and basic services for data transfer and browsing (e.g FTP, HTTP, etc). - Syntactic: allowing the interchange of metadata and protocol elements. This layer corresponds to a definition Core Metadata Set, the format of exchange/delivery for the data and associated metadata and possible software. This layer is implemented by the DIAL-P logical interface (e.g. adoption of INSPIRE compliant metadata set and common data formats). - Functional/pragmatic: based on a common set of functional primitives or on a common set of service definitions. This layer refers to the definition of services based on Web services standards. This layer is implemented by the DIAL-P logical interface (e.g. adoption of INSPIRE compliant network services). - Semantic: allowing to access similar classes of objects and services across multiple sites, with multilinguality of content as one specific aspect. This layer corresponds to MIS interface, terminology and thesaurus. Given the above requirements, the proposed solution is a federation of systems, where the individual participants are self-contained autonomous systems, but together form a consistent wider picture. A mid-tier integration layer mediates between existing systems, adapting their data and service model schema to the MIS. The developed MIS is a read-only system, i.e. does not allow updating (or inserting) data into the participant resource systems. The main advantages of the proposed approach are: • to enable information sources to join the MIS and publish their data and metadata in a secure way, without any modification to their existing resources and procedures and without any restriction to their autonomy; • to enable users to browse and query the MIS, receiving an aggregated result incorporating relevant data and metadata from across different sources; • to accommodate the growth of such a MIS, either in terms of its clients or of its information resources, as well as the evolution of the underlying data model.

76 FR 75570 - Self-Regulatory Organizations; The Depository Trust Company; Notice of Filing of Proposed Rule...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-02

... counterparty by counterparty basis. Currently, all free money market instrument (``MMI'') deliveries are routed... was built in 1990 to route money market instrument (``MMI'') transactions for receiver approval. In... orders involve no securities, only money. \\5\\ The net debit cap control is designed so that DTC may...

Development of a regional littoral benthic macroinvertebrate multi-metric index (MMI) for lakes from the National Lakes Assessment

EPA Science Inventory

During the 2007 National Lakes Assessment (NLA) benthic macroinvertebrate samples were collected from the lake littoral zone. The purpose of the sampling was to assess the feasibility of a multi-metric index (MMI) to assess the condition of the littoral benthic macroinvertebrate...

Gasohol Quality Control for Real Time Applications by Means of a Multimode Interference Fiber Sensor

PubMed Central

Rodríguez Rodríguez, Adolfo J.; Baldovino-Pantaleón, Oscar; Domínguez Cruz, Rene F.; Zamarreño, Carlos R.; Matías, Ignacio R.; May-Arrioja, Daniel A.

2014-01-01

In this work we demonstrate efficient quality control of a variety of gasoline and ethanol (gasohol) blends using a multimode interference (MMI) fiber sensor. The operational principle relies on the fact that the addition of ethanol to the gasohol blend reduces the refractive index (RI) of the gasoline. Since MMI sensors are capable of detecting small RI changes, the ethanol content of the gasohol blend is easily determined by tracking the MMI peak wavelength response. Gasohol blends with ethanol contents ranging from 0% to 50% has been clearly identified using this device, which provides a linear response with a maximum sensitivity of 0.270 nm/% EtOH. The sensor can also distinguish when water incorporated in the blend has exceeded the maximum volume tolerated by the gasohol blend, which is responsible for phase separation of the ethanol and gasoline and could cause serious engine failures. Since the MMI sensor is straightforward to fabricate and does not require any special coating it is a cost effective solution for real time and in-situ monitoring of the quality of gasohol blends. PMID:25256111

Numerical analysis of a 3D optical sensor based on single mode fiber to multimode interference graphene design

NASA Astrophysics Data System (ADS)

Mutter, Kussay N.; Jafri, Zubir M.; Tan, Kok Chooi

2016-04-01

In this paper, the simulation and design of a waveguide for water turbidity sensing are presented. The structure of the proposed sensor uses a 2x2 array of multimode interference (MMI) coupler based on micro graphene waveguide for high sensitivity. The beam propagation method (BPM) are used to efficiently design the sensor structure. The structure is consist of an array of two by two elements of sensors. Each element has three sections of single mode for field input tapered to MMI as the main core sensor without cladding which is graphene based material, and then a single mode fiber as an output. In this configuration MMI responses to any change in the environment. We validate and present the results by implementing the design on a set of sucrose solution and showing how these samples lead to a sensitivity change in the sensor based on the MMI structures. Overall results, the 3D design has a feasible and effective sensing by drawing topographical distribution of suspended particles in the water.

The Mars Express/NASA Project at JPL

NASA Technical Reports Server (NTRS)

Thompson, Thomas W.; Horttor, R. L.; Acton, C. H., Jr.; Zamani, P.; Johnson, W. T. K.; Plaut, J. J.; Holmes, D. P.; No, S.; Asmar, S. W.; Goltz, G.

2005-01-01

An overview of the Mars Express/NASA Project at JPL is presented. The topics include: 1) Mars Express Mission Experiments and Investigators; 2) Mars Advanced Radar for Subsurface and Ionospheric Soundig (MARSIS) Overview; 3) MARSIS Experiment Overview; 4) Interoperability Concept; 5) Mars Express Science Operations; 6) Mars Express Schedule (2003-2007);

Genomic organization, evolution and functional characterization of soluble toll-like receptor 5 (TLR5S) in miiuy croaker (Miichthys miiuy).

PubMed

Huo, Ruixuan; Zhao, Xueyan; Han, Jingjing; Xu, Tianjun

2018-05-30

Toll-like receptors (TLRs) play the key role in host defense of invasion of pathogens, not only in the innate immunity, but also in adaptive immunity. There are significant varieties and distinct features in fish TLRs, the TLR5 subfamily have two members (TLR5M and TLR5S). However, the exact role of TLR5 was lack of research in fish. In this study, a soluble form of TLR5 (TLR5S) was identified in miiuy croaker. The bioinformatics analysis showed that miiuy croaker TLR5S lacked the transmembrane domain and TIR domain. In other words, mmiTLR5S only has leucine-rich repeats (LRRs) domain, it is one of differences between TLR5M and TLR5S. Comparative genomic analysis showed that TLR5S might have happened an evolution between species. Expression analysis showed that mmiTLR5S was expressed in all tested miiuy croaker tissues and the mmiTLR5S expressions were significantly upregulated at 12 h in liver and kidney after Vibrio harveyi infection. Further functional experiments showed that NF-кB can be actived by mmiTLR5S, TLR5S might be an indispensable role in organism immune response. In short, the study of mmiTLR5S enriches the information of TLR5S and lays the foundation for future research on teleost TLRs system. Copyright © 2018 Elsevier Ltd. All rights reserved.

Developmental exposure to methimazole increases anxiety behavior in zebrafish.

PubMed

Reider, Masha; Connaughton, Victoria P

2015-10-01

The role of thyroid hormones in vertebrate development has been well documented for several decades. As hypothyroidism during critical periods of development can cause defects to the development of every major organ system, including brain, eye, and general morphology, we hypothesized that hypothyroidism would affect specific behaviors. To assess this, we treated zebrafish with the hypothyroid drug methimazole (MMI) and examined changes in anxiety, shoaling, vision, and locomotion. Following low-dose MMI exposure for the first 10 days of life, a time of rapid and significant development, larvae were removed from treatment and allowed to develop until 1 month of age. Comparisons between treated and controls took place between 10 and 30 days postfertilization to examine times both during and after treatment. Using the novel tank and startle response tests, we found that anxiety behaviors are significantly increased following MMI treatment. These effects persisted for several days following removal from treatment and indicate a prolonged effect of early hypothyroidism. However, permanent MMI effects on anxiety were not observed, as anxiety behaviors of early treated zebrafish recovered to control levels following 10 days out of treatment. In contrast to the strong link between MMI treatment and anxiety, shoaling and visual behaviors were not significantly affected within our experimental parameters. This indicates that disruption of thyroid system functioning early in life can differentially affect behavior by specifically altering anxiety responses without producing indiscriminate changes to overall behavioral development. (c) 2015 APA, all rights reserved).

Developing and piloting the multiple mini-interview in pre-registration student midwife selection in a UK setting.

PubMed

Callwood, Alison; Cooke, Debbie; Allan, Helen

2014-12-01

Published research has demonstrated that the multiple mini-interview (MMI) is a reliable assessment instrument in medical and nursing student selection. There is a dearth of evidence specifically relating to the advancement and subsequent evaluation of MMIs in the context of student midwife selection. To develop, pilot and examine the reliability of MMIs in pre-registration student midwife selection in a UK setting. DeVellis' framework for questionnaire development underpinned the generation of MMI scenarios. BSc (Hons) Midwifery Studies students at a Higher Education Institution in the UK volunteered to participate in 'mock' MMI circuits during the first week of their programme. An eight station model was piloted. Communication skills were rated at each station as a generic attribute. Station specific attributes assessed included: compassion and empathy; respect for difference and diversity; honesty and integrity; intellectual curiosity and reflective nature; advocacy; respect for privacy and dignity; team working and initiative; the role of the midwife and motivation to become a midwife. Participants' responses to scenario questions were rated on a 7 point scale. Cronbach's alpha scores measuring internal consistency ranged from 0.91 to 0.97 CONCLUSION: The systematic development of the MMI model and scenarios resulted in 'excellent' reliability across all stations. These findings endorse the MMI technique as a reliable alternative to the personal interview in informing final decisions in pre-registration student midwife selection. Copyright © 2014 Elsevier Ltd. All rights reserved.

Probabilistic Relationships between Ground‐Motion Parameters and Modified Mercalli Intensity in California

USGS Publications Warehouse

Worden, C.B.; Wald, David J.; Rhoades, D.A.

2012-01-01

We use a database of approximately 200,000 modified Mercalli intensity (MMI) observations of California earthquakes collected from USGS "Did You Feel It?" (DYFI) reports, along with a comparable number of peak ground-motion amplitudes from California seismic networks, to develop probabilistic relationships between MMI and peak ground velocity (PGV), peak ground acceleration (PGA), and 0.3-s, 1-s, and 3-s 5% damped pseudospectral acceleration (PSA). After associating each ground-motion observation with an MMI computed from all the DYFI responses within 2 km of the observation, we derived a joint probability distribution between MMI and ground motion. We then derived reversible relationships between MMI and each ground-motion parameter by using a total least squares regression to fit a bilinear function to the median of the stacked probability distributions. Among the relationships, the fit to peak ground velocity has the smallest errors, though linear combinations of PGA and PGV give nominally better results. We also find that magnitude and distance terms reduce the overall residuals and are justifiable on an information theoretic basis. For intensities MMI≥5, our results are in close agreement with the relations of Wald, Quitoriano, Heaton, and Kanamori (1999); for lower intensities, our results fall midway between Wald, Quitoriano, Heaton, and Kanamori (1999) and those of Atkinson and Kaka (2007). The earthquakes in the study ranged in magnitude from 3.0 to 7.3, and the distances ranged from less than a kilometer to about 400 km from the source.

Treatment of graves' disease with antithyroid drugs in the first trimester of pregnancy and the prevalence of congenital malformation.

PubMed

Yoshihara, Ai; Noh, JaedukYoshimura; Yamaguchi, Takuhiro; Ohye, Hidemi; Sato, Shiori; Sekiya, Kenichi; Kosuga, Yuka; Suzuki, Miho; Matsumoto, Masako; Kunii, Yo; Watanabe, Natsuko; Mukasa, Koji; Ito, Kunihiko; Ito, Koichi

2012-07-01

Several reports have suggested that propylthiouracil (PTU) may be safer than methimazole (MMI) for treating thyrotoxicosis during pregnancy because congenital malformations have been associated with the use of MMI during pregnancy. We investigated whether in utero exposure to antithyroid drugs resulted in a higher rate of major malformations than among the infants born to a control group of pregnant women. We reviewed the cases of women with Graves' disease who became pregnant. The pregnancy outcomes of 6744 women were known, and there were 5967 live births. MMI alone had been used to treat 1426 of the women, and 1578 women had been treated with PTU alone. The 2065 women who had received no medication for the treatment of Graves' disease during the first trimester served as the control group. The remaining women had been treated with potassium iodide, levothyroxine, or more than one drug during the first trimester. The antithyroid drugs were evaluated for associations with congenital malformations. The overall rate of major anomalies in the MMI group was 4.1% (50 of 1231), and it was significantly higher than the 2.1% (40 of 1906) in the control group (P = 0.002), but there was no increase in the overall rate of major anomalies in the PTU group in comparison with the control group (1.9%; 21 of 1399; P = 0.709). Seven of the 1231 newborns in the MMI group had aplasia cutis congenita, six had an omphalocele, seven had a symptomatic omphalomesenteric duct anomaly, and one had esophageal atresia. Hyperthyroidism in the first trimester of pregnancy did not increase the rate of congenital malformation. In utero exposure to MMI during the first trimester of pregnancy increased the rate of congenital malformations, and it significantly increased the rate of aplasia cutis congenita, omphalocele, and a symptomatic omphalomesenteric duct anomaly.

Novel Application of Quantitative Single-Photon Emission Computed Tomography/Computed Tomography to Predict Early Response to Methimazole in Graves' Disease

PubMed Central

Kim, Hyun Joo; Bang, Ji-In; Kim, Ji-Young; Moon, Jae Hoon; So, Young

2017-01-01

Objective Since Graves' disease (GD) is resistant to antithyroid drugs (ATDs), an accurate quantitative thyroid function measurement is required for the prediction of early responses to ATD. Quantitative parameters derived from the novel technology, single-photon emission computed tomography/computed tomography (SPECT/CT), were investigated for the prediction of achievement of euthyroidism after methimazole (MMI) treatment in GD. Materials and Methods A total of 36 GD patients (10 males, 26 females; mean age, 45.3 ± 13.8 years) were enrolled for this study, from April 2015 to January 2016. They underwent quantitative thyroid SPECT/CT 20 minutes post-injection of 99mTc-pertechnetate (5 mCi). Association between the time to biochemical euthyroidism after MMI treatment and %uptake, standardized uptake value (SUV), functional thyroid mass (SUVmean × thyroid volume) from the SPECT/CT, and clinical/biochemical variables, were investigated. Results GD patients had a significantly greater %uptake (6.9 ± 6.4%) than historical control euthyroid patients (n = 20, 0.8 ± 0.5%, p < 0.001) from the same quantitative SPECT/CT protocol. Euthyroidism was achieved in 14 patients at 156 ± 62 days post-MMI treatment, but 22 patients had still not achieved euthyroidism by the last follow-up time-point (208 ± 80 days). In the univariate Cox regression analysis, the initial MMI dose (p = 0.014), %uptake (p = 0.015), and functional thyroid mass (p = 0.016) were significant predictors of euthyroidism in response to MMI treatment. However, only %uptake remained significant in a multivariate Cox regression analysis (p = 0.034). A %uptake cutoff of 5.0% dichotomized the faster responding versus the slower responding GD patients (p = 0.006). Conclusion A novel parameter of thyroid %uptake from quantitative SPECT/CT is a predictive indicator of an early response to MMI in GD patients. PMID:28458607

Accounting for regional variation in both natural environment and human disturbance to improve performance of multimetric indices of lotic benthic diatoms.

PubMed

Tang, Tao; Stevenson, R Jan; Infante, Dana M

2016-10-15

Regional variation in both natural environment and human disturbance can influence performance of ecological assessments. In this study we calculated 5 types of benthic diatom multimetric indices (MMIs) with 3 different approaches to account for variation in ecological assessments. We used: site groups defined by ecoregions or diatom typologies; the same or different sets of metrics among site groups; and unmodeled or modeled MMIs, where models accounted for natural variation in metrics within site groups by calculating an expected reference condition for each metric and each site. We used data from the USEPA's National Rivers and Streams Assessment to calculate the MMIs and evaluate changes in MMI performance. MMI performance was evaluated with indices of precision, bias, responsiveness, sensitivity and relevancy which were respectively measured as MMI variation among reference sites, effects of natural variables on MMIs, difference between MMIs at reference and highly disturbed sites, percent of highly disturbed sites properly classified, and relation of MMIs to human disturbance and stressors. All 5 types of MMIs showed considerable discrimination ability. Using different metrics among ecoregions sometimes reduced precision, but it consistently increased responsiveness, sensitivity, and relevancy. Site specific metric modeling reduced bias and increased responsiveness. Combined use of different metrics among site groups and site specific modeling significantly improved MMI performance irrespective of site grouping approach. Compared to ecoregion site classification, grouping sites based on diatom typologies improved precision, but did not improve overall performance of MMIs if we accounted for natural variation in metrics with site specific models. We conclude that using different metrics among ecoregions and site specific metric modeling improve MMI performance, particularly when used together. Applications of these MMI approaches in ecological assessments introduced a tradeoff with assessment consistency when metrics differed across site groups, but they justified the convenient and consistent use of ecoregions. Copyright © 2016 Elsevier B.V. All rights reserved.

Macroseismic Intensity and Instrumental Ground Motion Parameter Correlations for Central Mexico

NASA Astrophysics Data System (ADS)

Sandoval Gómez, H.; Ramirez Guzman, L.; Espindola, V.

2012-12-01

We present instrumental intensity prediction equations for earthquakes in Central Mexico based on the correlation of observed Instrumental Ground-Motion Parameters (IGMP) and Modified Mercalli Intensity (MMI) scale reports. The goal of this study is to provide a model that can be used by the near real-time earthquake response system operated by the Institutes of Engineering and Geophysics at the National Autonomous University of Mexico (UNAM), which delivers estimates of key information associated with the societal impact due to earthquakes not available in the immediate aftermath of the event. Correlations of MMI and IGMP have been derived in other countries with different tectonic settings and built environments, but this is the first study devoted to the development of equations for the central region of Mexico. The IGMP are obtained from records of several stations for earthquakes with Mw 5.0-8.0 from the seismic networks operated by UNAM and other institutions in Mexico. The MMI observations were primarily obtained from the Did You Feel It (DYFI) report service of the U.S. Geological Survey and re-interpreted MMI reports from UNAM earthquake bulletin archives. For each instrumental observation we assigned a mean MMI intensity based on the proximity of the site where reported value are available, constrained by geological conditions and a visual inspection to guarantee that the intensity would be within one unit of the assigned value; following the procedure by Atkinson and Kaka (2006). We derived correlations for peak ground velocity (pgv) and acceleration, and three spectral acceleration periods (T=1, 2 and 3 s). In addition, we analyzed the Mw and distance dependence. We concluded that pgv and the spectral accelerations are the most useful IGMP predictors for MMI in the region of interest and the correlations differ significantly from those obtained in regions with other tectonic settings and infrastructure vulnerabilities (e.g. Wald et al, 1999; Atkinson and Kaka, 2006, Cramer and Dangkua, 2011).

ETICS: the international software engineering service for the grid

NASA Astrophysics Data System (ADS)

Meglio, A. D.; Bégin, M.-E.; Couvares, P.; Ronchieri, E.; Takacs, E.

2008-07-01

The ETICS system is a distributed software configuration, build and test system designed to fulfil the needs of improving the quality, reliability and interoperability of distributed software in general and grid software in particular. The ETICS project is a consortium of five partners (CERN, INFN, Engineering Ingegneria Informatica, 4D Soft and the University of Wisconsin-Madison). The ETICS service consists of a build and test job execution system based on the Metronome software and an integrated set of web services and software engineering tools to design, maintain and control build and test scenarios. The ETICS system allows taking into account complex dependencies among applications and middleware components and provides a rich environment to perform static and dynamic analysis of the software and execute deployment, system and interoperability tests. This paper gives an overview of the system architecture and functionality set and then describes how the EC-funded EGEE, DILIGENT and OMII-Europe projects are using the software engineering services to build, validate and distribute their software. Finally a number of significant use and test cases will be described to show how ETICS can be used in particular to perform interoperability tests of grid middleware using the grid itself.

Interoperability prototype between hospitals and general practitioners in Switzerland.

PubMed

Alves, Bruno; Müller, Henning; Schumacher, Michael; Godel, David; Abu Khaled, Omar

2010-01-01

Interoperability in data exchange has the potential to improve the care processes and decrease costs of the health care system. Many countries have related eHealth initiatives in preparation or already implemented. In this area, Switzerland has yet to catch up. Its health system is fragmented, because of the federated nature of cantons. It is thus more difficult to coordinate efforts between the existing healthcare actors. In the Medicoordination project a pragmatic approach was selected: integrating several partners in healthcare on a regional scale in French speaking Switzerland. In parallel with the Swiss eHealth strategy, currently being elaborated by the Swiss confederation, particularly medium-sized hospitals and general practitioners were targeted in Medicoordination to implement concrete scenarios of information exchange between hospitals and general practitioners with a high added value. In this paper we focus our attention on a prototype implementation of one chosen scenario: the discharge summary. Although simple in concept, exchanging release letters shows small, hidden difficulties due to the multi-partner nature of the project. The added value of such a prototype is potentially high and it is now important to show that interoperability can work in practice.

Data interoperabilty between European Environmental Research Infrastructures and their contribution to global data networks

NASA Astrophysics Data System (ADS)

Kutsch, W. L.; Zhao, Z.; Hardisty, A.; Hellström, M.; Chin, Y.; Magagna, B.; Asmi, A.; Papale, D.; Pfeil, B.; Atkinson, M.

2017-12-01

Environmental Research Infrastructures (ENVRIs) are expected to become important pillars not only for supporting their own scientific communities, but also a) for inter-disciplinary research and b) for the European Earth Observation Program Copernicus as a contribution to the Global Earth Observation System of Systems (GEOSS) or global thematic data networks. As such, it is very important that data-related activities of the ENVRIs will be well integrated. This requires common policies, models and e-infrastructure to optimise technological implementation, define workflows, and ensure coordination, harmonisation, integration and interoperability of data, applications and other services. The key is interoperating common metadata systems (utilising a richer metadata model as the `switchboard' for interoperation with formal syntax and declared semantics). The metadata characterises data, services, users and ICT resources (including sensors and detectors). The European Cluster Project ENVRIplus has developed a reference model (ENVRI RM) for common data infrastructure architecture to promote interoperability among ENVRIs. The presentation will provide an overview of recent progress and give examples for the integration of ENVRI data in global integration networks.

The e-MapScholar project—an example of interoperability in GIScience education

NASA Astrophysics Data System (ADS)

Purves, R. S.; Medyckyj-Scott, D. J.; Mackaness, W. A.

2005-03-01

The proliferation of the use of digital spatial data in learning and teaching provides a set of opportunities and challenges for the development of e-learning materials suitable for use by a broad spectrum of disciplines in Higher Education. Effective e-learning materials must both provide engaging materials with which the learner can interact and be relevant to the learners' disciplinary and background knowledge. Interoperability aims to allow sharing of data and materials through the use of common agreements and specifications. Shared learning materials can take advantage of interoperable components to provide customisable components, and must consider issues in sharing data across institutional borders. The e-MapScholar project delivers teaching materials related to spatial data, which are customisable with respect to both context and location. Issues in the provision of such interoperable materials are discussed, including suitable levels of granularity of materials, the provision of tools to facilitate customisation and mechanisms to deliver multiple data sets and the metadata issues related to such materials. The examples shown make extensive use of the OpenGIS consortium specifications in the delivery of spatial data.

A Thyroid Hormone Challenge in Hypothyroid Rats Identifies T3 Regulated Genes in the Hypothalamus and in Models with Altered Energy Balance and Glucose Homeostasis

PubMed Central

Herwig, Annika; Campbell, Gill; Mayer, Claus-Dieter; Boelen, Anita; Anderson, Richard A.; Ross, Alexander W.; Mercer, Julian G.

2014-01-01

Background: The thyroid hormone triiodothyronine (T3) is known to affect energy balance. Recent evidence points to an action of T3 in the hypothalamus, a key area of the brain involved in energy homeostasis, but the components and mechanisms are far from understood. The aim of this study was to identify components in the hypothalamus that may be involved in the action of T3 on energy balance regulatory mechanisms. Methods: Sprague Dawley rats were made hypothyroid by giving 0.025% methimazole (MMI) in their drinking water for 22 days. On day 21, half the MMI-treated rats received a saline injection, whereas the others were injected with T3. Food intake and body weight measurements were taken daily. Body composition was determined by magnetic resonance imaging, gene expression was analyzed by in situ hybridization, and T3-induced gene expression was determined by microarray analysis of MMI-treated compared to MMI-T3-injected hypothalamic RNA. Results: Post mortem serum thyroid hormone levels showed that MMI treatment decreased circulating thyroid hormones and increased thyrotropin (TSH). MMI treatment decreased food intake and body weight. Body composition analysis revealed reduced lean and fat mass in thyroidectomized rats from day 14 of the experiment. MMI treatment caused a decrease in circulating triglyceride concentrations, an increase in nonesterified fatty acids, and decreased insulin levels. A glucose tolerance test showed impaired glucose clearance in the thyroidectomized animals. In the brain, in situ hybridization revealed marked changes in gene expression, including genes such as Mct8, a thyroid hormone transporter, and Agrp, a key component in energy balance regulation. Microarray analysis revealed 110 genes to be up- or downregulated with T3 treatment (±1.3-fold change, p<0.05). Three genes chosen from the differentially expressed genes were verified by in situ hybridization to be activated by T3 in cells located at or close to the hypothalamic ventricular ependymal layer and differentially expressed in animal models of long- and short-term body weight regulation. Conclusion: This study identified genes regulated by T3 in the hypothalamus, a key area of the brain involved in homeostasis and neuroendocrine functions. These include genes hitherto not known to be regulated by thyroid status. PMID:25087834

Leveraging Python Interoperability Tools to Improve Sapphire's Usability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gezahegne, A; Love, N S

2007-12-10

The Sapphire project at the Center for Applied Scientific Computing (CASC) develops and applies an extensive set of data mining algorithms for the analysis of large data sets. Sapphire's algorithms are currently available as a set of C++ libraries. However many users prefer higher level scripting languages such as Python for their ease of use and flexibility. In this report, we evaluate four interoperability tools for the purpose of wrapping Sapphire's core functionality with Python. Exposing Sapphire's functionality through a Python interface would increase its usability and connect its algorithms to existing Python tools.

Psychometric Properties of the Multiple Mini-Interview Used for Medical Admissions: Findings from Generalizability and Rasch Analyses

ERIC Educational Resources Information Center

Sebok, Stefanie S.; Luu, King; Klinger, Don A.

2014-01-01

The multiple mini-interview (MMI) has become an increasingly popular admissions method for selecting prospective students into professional programs (e.g., medical school). The MMI uses a series of short, labour intensive simulation stations and scenario interviews to more effectively assess applicants' non-cognitive qualities such as…

77 FR 17534 - Self-Regulatory Organizations; The Depository Trust Company; Notice of Filing of Proposed Rule...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-26

... Association (``SIFMA'') formed the MMI Blue-Sky Task Force (``Task Force'') to address systemic and unique... processing. The Task Force, along other money market industry members,\\8\\ determined that DTC's current MMI... amount or proceeds after the 3 p.m. E.T. deadline for RTP instructions.\\9\\ Accordingly, DTC is proposing...

Monitoring Molecules in Neuroscience Then and Now

PubMed Central

Rice, Margaret E.

2017-01-01

The 16th International Conference on Monitoring Molecules in Neuroscience (MMiN) was held in Gothenburg, Sweden in late spring 2016. This conference originated as a methods meeting focused on in vivo voltammetric techniques and microdialysis. Over time, however, the scope has evolved to include a number of other methods for neurochemical detection that range from single-cell fluorescence in vitro and in vivo in animal models to whole-brain imaging in humans. Overall, MMiN provides a unique forum for introducing new developments in neurochemical detection, as well as for reporting exciting neurobiological insights provided by established and novel methods. This Viewpoint includes a brief history of the meeting, factors that have contributed its evolution, and some highlights of MMiN 2016. PMID:28169519

Monitoring Molecules in Neuroscience Then and Now.

PubMed

Rice, Margaret E

2017-02-15

The 16th International Conference on Monitoring Molecules in Neuroscience (MMiN) was held in Gothenburg, Sweden in late spring 2016. This conference originated as a methods meeting focused on in vivo voltammetric techniques and microdialysis. Over time, however, the scope has evolved to include a number of other methods for neurochemical detection that range from single-cell fluorescence in vitro and in vivo in animal models to whole-brain imaging in humans. Overall, MMiN provides a unique forum for introducing new developments in neurochemical detection, as well as for reporting exciting neurobiological insights provided by established and novel methods. This Viewpoint includes a brief history of the meeting, factors that have contributed its evolution, and some highlights of MMiN 2016.

The EuroGEOSS Advanced Operating Capacity

NASA Astrophysics Data System (ADS)

Nativi, S.; Vaccari, L.; Stock, K.; Diaz, L.; Santoro, M.

2012-04-01

The concept of multidisciplinary interoperability for managing societal issues is a major challenge presently faced by the Earth and Space Science Informatics community. With this in mind, EuroGEOSS project was launched on May 1st 2009 for a three year period aiming to demonstrate the added value to the scientific community and society of providing existing earth observing systems and applications in an interoperable manner and used within the GEOSS and INSPIRE frameworks. In the first period, the project built an Initial Operating Capability (IOC) in the three strategic areas of Drought, Forestry and Biodiversity; this was then enhanced into an Advanced Operating Capacity (AOC) for multidisciplinary interoperability. Finally, the project extended the infrastructure to other scientific domains (geology, hydrology, etc.). The EuroGEOSS multidisciplinary AOC is based on the Brokering Approach. This approach aims to achieve multidisciplinary interoperability by developing an extended SOA (Service Oriented Architecture) where a new type of "expert" components is introduced: the Broker. These implement all mediation and distribution functionalities needed to interconnect the distributed and heterogeneous resources characterizing a System of Systems (SoS) environment. The EuroGEOSS AOC is comprised of the following components: • EuroGEOSS Discovery Broker: providing harmonized discovery functionalities by mediating and distributing user queries against tens of heterogeneous services; • EuroGEOSS Access Broker: enabling users to seamlessly access and use heterogeneous remote resources via a unique and standard service; • EuroGEOSS Web 2.0 Broker: enhancing the capabilities of the Discovery Broker with queries towards the new Web 2.0 services; • EuroGEOSS Semantic Discovery Broker: enhancing the capabilities of the Discovery Broker with semantic query-expansion; • EuroGEOSS Natural Language Search Component: providing users with the possibilities to search for resources using natural language queries; • Service Composition Broker: allowing users to compose and execute complex Business Processes, based on the technology developed by the FP7 UncertWeb project. Recently, the EuroGEOSS Brokering framework was presented at the GEO-VIII Plenary and Exhibition in Istanbul and introduced into the GEOSS Common Infrastructure.

Robust Computation of Linear Models, or How to Find a Needle in a Haystack

DTIC Science & Technology

2012-02-17

robustly, project it onto a sphere, and then apply standard PCA. This approach is due to [LMS+99]. Maronna et al . [MMY06] recommend it as a preferred...of this form is due to Chandrasekaran et al . [CSPW11]. Given an observed matrix X, they propose to solve the semidefinite problem minimize ‖P ‖S1 + γ...regularization parameter γ negotiates a tradeoff between the two goals. Candès et al . [CLMW11] study the performance of (2.1) for robust linear

Geluidsexpositie bij Gebruik van Otoplastieken met Communicatie (Sound Exposure Level of F-16 Crew Chiefs Using Custom Molded Communications Earplugs)

DTIC Science & Technology

2008-10-01

346 35 39 77 lnfo-DenV@tno nl Datum oktober 2008 Auteur (s) dr. ir. MM..I. Houben J.A. Verhave Rubricering rapport Ongerubriceerd Vastgesteld... Auteur (s) dr. ir. M.M.J. Houben J.A. Verhave Rubricering rapport Ongerubriceerd TNO-rapport | TNO-DV 2008 A395 4/19 Summary Sound exposure level...ontwikkeld om de geluidsexpositie van CEPs te bepalen (TNO-project 032.13072, rapport TNO-DV 2008 A054) [1], In theorie kan het totale

Infrastructure for Planetary Sciences: Universal planetary database development project

NASA Astrophysics Data System (ADS)

Kasaba, Yasumasa; Capria, M. T.; Crichton, D.; Zender, J.; Beebe, R.

The International Planetary Data Alliance (IPDA), formally formed under COSPAR (Formal start: from the COSPAR 2008 at Montreal), is a joint international effort to enable global access and exchange of high quality planetary science data, and to establish archive stan-dards that make it easier to share the data across international boundaries. In 2008-2009, thanks to the many players from several agencies and institutions, we got fruitful results in 6 projects: (1) Inter-operable Planetary Data Access Protocol (PDAP) implementations [led by J. Salgado@ESA], (2) Small bodies interoperability [led by I. Shinohara@JAXA N. Hirata@U. Aizu], (3) PDAP assessment [led by Y. Yamamoto@JAXA], (4) Architecture and standards definition [led by D. Crichton@NASA], (5) Information model and data dictionary [led by S. Hughes@NASA], and (6) Venus Express Interoperability [led by N. Chanover@NMSU]. 'IPDA 2009-2010' is important, especially because the NASA/PDS system reformation is now reviewed as it develops for application at the international level. IPDA is the gate for the establishment of the future infrastructure. We are running 8 projects: (1) IPDA Assessment of PDS4 Data Standards [led by S. Hughes (NASA/JPL)], (2) IPDA Archive Guide [led by M.T. Capria (IASF/INAF) and D. Heather (ESA/PSA)], (3) IPDA Standards Identification [led by E. Rye (NASA/PDS) and G. Krishna (ISRO)], (4) Ancillary Data Standards [led by C. Acton (NASA/JPL)], (5) IPDA Registries Definition [led by D. Crichton (NASA/JPL)], (6) PDAP Specification [led by J. Salgado (ESA/PSA) and Y. Yamamoto (JAXA)], (7) In-teroperability Assessment [R. Beebe (NMSU) and D. Heather (ESA/PSA)], and (8) PDAP Geographic Information System (GIS) extension [N. Hirata (Univ. Aizu) and T. Hare (USGS: thare@usgs.gov)]. This paper presents our achievements and plans summarized in the IPDA 5th Steering Com-mittee meeting at DLR in July 2010. We are now just the gate for the establishment of the Infrastructure.

Positive train control shared network.

DOT National Transportation Integrated Search

2015-05-01

The Interoperable Train Control (ITC) Positive : Train Control (PTC) Shared Network (IPSN) : project investigated anticipated industry benefits : and the level of support for the development of : a hosted technological platform for PTC : messaging ac...

Hepatoprotective and Antioxidant Effect of Mangifera Indica Leaf Extracts against Mercuric Chloride-induced Liver Toxicity in Mice.

PubMed

Karuppanan, Muthupillai; Krishnan, Manigandan; Padarthi, Pavankumar; Namasivayam, Elangovan

2014-01-01

To explore the antioxidant and hepatoprotective effect of ethanolic Mangifera indica (EMI) and methanolic Mangifera indica (MMI) leaf extracts in mercuric chloride (HgCl 2 ) induced toxicity in Swiss albino mice. Toxicity in mice was induced with HgCl 2 (5.0 mg/kg, i.p.), followed by oral intervention with EMI and MMI extracts (25 mg and 50 mg/kg. body wt.) for 30 days. The extent of liver damage was assessed from the extents of histopathological, morphological, antioxidant and liver enzymes. Mercuric chloride-induced mice showed an increased cellular damage whereas leaf extracts of EMI and MMI-treated mice showed recovery of damaged hepatocytes. Mercuric chloride intoxicated mice exhibited a significant (p < 0.05) elevation in the liver enzymes (Aspartate amino transferase and Alanine amino transferase) and gradual decline in the cellular radical scavenging enzyme levels (Catalase, Glutathione-s-transferase and Glutathione peroxidase. The combined treatment with EMI and MMI leaf extracts significantly (p < 0.05) reversed these parameters. However, the effects of MMI leaf extract (50 mg/kg) were superior to those of EMI- treated mice possibly due to its potent radical scavenging property. These results suggest that oral supplementation of Mangifera indica extract remarkably reduces hepatotoxicity in mice possibly through its antioxidant potentials. How to cite this article: Karuppanan M, Krishnan M, Padarthi P, Namasivayam E. Hepatoprotec-tive and Antioxidant Effect of Mangifera Indica Leaf Extracts against Mercuric Chloride-induced Liver Toxicity in Mice. Euroasian J Hepato-Gastroenterol 2014;4(1):18-24.

Hepatoprotective and Antioxidant Effect of Mangifera Indica Leaf Extracts against Mercuric Chloride-induced Liver Toxicity in Mice

PubMed Central

Karuppanan, Muthupillai; Krishnan, Manigandan; Padarthi, Pavankumar

2014-01-01

ABSTRACT Background To explore the antioxidant and hepatoprotective effect of ethanolic Mangifera indica (EMI) and methanolic Mangifera indica (MMI) leaf extracts in mercuric chloride (HgCl2) induced toxicity in Swiss albino mice. Materials and methods Toxicity in mice was induced with HgCl2 (5.0 mg/kg, i.p.), followed by oral intervention with EMI and MMI extracts (25 mg and 50 mg/kg. body wt.) for 30 days. Results and discussion The extent of liver damage was assessed from the extents of histopathological, morphological, antioxidant and liver enzymes. Mercuric chloride-induced mice showed an increased cellular damage whereas leaf extracts of EMI and MMI-treated mice showed recovery of damaged hepatocytes. Mercuric chloride intoxicated mice exhibited a significant (p < 0.05) elevation in the liver enzymes (Aspartate amino transferase and Alanine amino transferase) and gradual decline in the cellular radical scavenging enzyme levels (Catalase, Glutathione-s-transferase and Glutathione peroxidase. The combined treatment with EMI and MMI leaf extracts significantly (p < 0.05) reversed these parameters. However, the effects of MMI leaf extract (50 mg/kg) were superior to those of EMI- treated mice possibly due to its potent radical scavenging property. These results suggest that oral supplementation of Mangifera indica extract remarkably reduces hepatotoxicity in mice possibly through its antioxidant potentials. How to cite this article: Karuppanan M, Krishnan M, Padarthi P, Namasivayam E. Hepatoprotec-tive and Antioxidant Effect of Mangifera Indica Leaf Extracts against Mercuric Chloride-induced Liver Toxicity in Mice. Euroasian J Hepato-Gastroenterol 2014;4(1):18-24. PMID:29264314

[Predictive model based multimetric index of macroinvertebrates for river health assessment].

PubMed

Chen, Kai; Yu, Hai Yan; Zhang, Ji Wei; Wang, Bei Xin; Chen, Qiu Wen

2017-06-18

Improving the stability of integrity of biotic index (IBI; i.e., multi-metric indices, MMI) across temporal and spatial scales is one of the most important issues in water ecosystem integrity bioassessment and water environment management. Using datasets of field-based macroinvertebrate and physicochemical variables and GIS-based natural predictors (e.g., geomorphology and climate) and land use variables collected at 227 river sites from 2004 to 2011 across the Zhejiang Province, China, we used random forests (RF) to adjust the effects of natural variations at temporal and spatial scales on macroinvertebrate metrics. We then developed natural variations adjusted (predictive) and unadjusted (null) MMIs and compared performance between them. The core me-trics selected for predictive and null MMIs were different from each other, and natural variations within core metrics in predictive MMI explained by RF models ranged between 11.4% and 61.2%. The predictive MMI was more precise and accurate, but less responsive and sensitive than null MMI. The multivariate nearest-neighbor test determined that 9 test sites and 1 most degraded site were flagged outside of the environmental space of the reference site network. We found that combination of predictive MMI developed by using predictive model and the nearest-neighbor test performed best and decreased risks of inferring type I (designating a water body as being in poor biological condition, when it was actually in good condition) and type II (designating a water body as being in good biological condition, when it was actually in poor condition) errors. Our results provided an effective method to improve the stability and performance of integrity of biotic index.

The RICORDO approach to semantic interoperability for biomedical data and models: strategy, standards and solutions

PubMed Central

2011-01-01

Background The practice and research of medicine generates considerable quantities of data and model resources (DMRs). Although in principle biomedical resources are re-usable, in practice few can currently be shared. In particular, the clinical communities in physiology and pharmacology research, as well as medical education, (i.e. PPME communities) are facing considerable operational and technical obstacles in sharing data and models. Findings We outline the efforts of the PPME communities to achieve automated semantic interoperability for clinical resource documentation in collaboration with the RICORDO project. Current community practices in resource documentation and knowledge management are overviewed. Furthermore, requirements and improvements sought by the PPME communities to current documentation practices are discussed. The RICORDO plan and effort in creating a representational framework and associated open software toolkit for the automated management of PPME metadata resources is also described. Conclusions RICORDO is providing the PPME community with tools to effect, share and reason over clinical resource annotations. This work is contributing to the semantic interoperability of DMRs through ontology-based annotation by (i) supporting more effective navigation and re-use of clinical DMRs, as well as (ii) sustaining interoperability operations based on the criterion of biological similarity. Operations facilitated by RICORDO will range from automated dataset matching to model merging and managing complex simulation workflows. In effect, RICORDO is contributing to community standards for resource sharing and interoperability. PMID:21878109

MRML: an extensible communication protocol for interoperability and benchmarking of multimedia information retrieval systems

NASA Astrophysics Data System (ADS)

Mueller, Wolfgang; Mueller, Henning; Marchand-Maillet, Stephane; Pun, Thierry; Squire, David M.; Pecenovic, Zoran; Giess, Christoph; de Vries, Arjen P.

2000-10-01

While in the area of relational databases interoperability is ensured by common communication protocols (e.g. ODBC/JDBC using SQL), Content Based Image Retrieval Systems (CBIRS) and other multimedia retrieval systems are lacking both a common query language and a common communication protocol. Besides its obvious short term convenience, interoperability of systems is crucial for the exchange and analysis of user data. In this paper, we present and describe an extensible XML-based query markup language, called MRML (Multimedia Retrieval markup Language). MRML is primarily designed so as to ensure interoperability between different content-based multimedia retrieval systems. Further, MRML allows researchers to preserve their freedom in extending their system as needed. MRML encapsulates multimedia queries in a way that enable multimedia (MM) query languages, MM content descriptions, MM query engines, and MM user interfaces to grow independently from each other, reaching a maximum of interoperability while ensuring a maximum of freedom for the developer. For benefitting from this, only a few simple design principles have to be respected when extending MRML for one's fprivate needs. The design of extensions withing the MRML framework will be described in detail in the paper. MRML has been implemented and tested for the CBIRS Viper, using the user interface Snake Charmer. Both are part of the GNU project and can be downloaded at our site.

Molecular responses of cells to 2-mercapto-1-methylimidazole gold nanoparticles (AuNPs)-mmi: investigations of histone methylation changes

NASA Astrophysics Data System (ADS)

Polverino, Arianna; Longo, Angela; Donizetti, Aldo; Drongitis, Denise; Frucci, Maria; Schiavo, Loredana; Carotenuto, Gianfranco; Nicolais, Luigi; Piscopo, Marina; Vitale, Emilia; Fucci, Laura

2014-07-01

While nanomedicine has an enormous potential to improve the precision of specific therapy, the ability to efficiently deliver these materials to regions of disease in vivo remains limited. In this study, we describe analyses of (AuNPs)-mmi cellular intake via fluorescence microscopy and its effects on H3K4 and H3K9 histone dimethylation. Specifically, we studied the level of H3K4 dimethylation in serving the role of an epigenetic marker of euchromatin, and of H3K9 dimethylation as a marker of transcriptional repression in four different cell lines. We analyzed histone di-methyl-H3K4 and di-methyl-H3K9 using either variable concentrations of nanoparticles or variable time points after cellular uptake. The observed methylation effects decreased consistently with decreasing (AuNPs)-mmi concentrations. Fluorescent microscopy and a binarization algorithm based on a thresholding process with RGB input images demonstrated the continued presence of (AuNPs)-mmi in cells at the lowest concentration used. Furthermore, our results show that the treated cell line used is able to rescue the untreated cell phenotype.

Management of hyperthyroidism during pregnancy and lactation.

PubMed

Azizi, Fereidoun; Amouzegar, Atieh

2011-06-01

Poorly treated or untreated maternal overt hyperthyroidism may affect pregnancy outcome. Fetal and neonatal hypo- or hyper-thyroidism and neonatal central hypothyroidism may complicate health issues during intrauterine and neonatal periods. To review articles related to appropriate management of hyperthyroidism during pregnancy and lactation. A literature review was performed using MEDLINE with the terms 'hyperthyroidism and pregnancy', 'antithyroid drugs and pregnancy', 'radioiodine and pregnancy', 'hyperthyroidism and lactation', and 'antithyroid drugs and lactation', both separately and in conjunction with the terms 'fetus' and 'maternal.' Antithyroid drugs are the main therapy for maternal hyperthyroidism. Both methimazole (MMI) and propylthiouracil (PTU) may be used during pregnancy; however, PTU is preferred in the first trimester and should be replaced by MMI after this trimester. Choanal and esophageal atresia of fetus in MMI-treated and maternal hepatotoxicity in PTU-treated pregnancies are of utmost concern. Maintaining free thyroxine concentration in the upper one-third of each trimester-specific reference interval denotes success of therapy. MMI is the mainstay of the treatment of post partum hyperthyroidism, in particular during lactation. Management of hyperthyroidism during pregnancy and lactation requires special considerations and should be carefully implemented to avoid any adverse effects on the mother, fetus, and neonate.

Central nervous system vasculitis after starting methimazole in a woman with Graves' disease.

PubMed

Tripodi, Pier Francesco; Ruggeri, Rosaria M; Campennì, Alfredo; Cucinotta, Mariapaola; Mirto, Angela; Lo Gullo, Renato; Baldari, Sergio; Trimarchi, Francesco; Cucinotta, Domenico; Russo, Giuseppina T

2008-09-01

Graves' disease (GD), a prototypical autoimmune disorder, is associated with other autoimmune diseases, including vasculitis. Antithyroid drugs, despite their postulated immunosuppressive effects, may cause several autoimmune disorders. Here we describe the first patient with central nervous system (CNS) vasculitis that developed shortly after the start of methimazole (MMI) treatment for GD. CNS vasculitis was suspected on the basis of the clinical features and neurologic examination, showing a reinforcement of deep reflexes, especially of the left knee and Achilles reflexes. The diagnosis was confirmed by a brain magnetic resonance imaging (MRI), which showed some hyperintensive spots in the subcortical substantia alba and in the parietal area bilaterally, and by a single-photon emission computed tomography (SPECT) imaging, which showed a nonhomogenous distribution of the blood flow in the brain, with a reduced perfusion on the left side of the frontotemporal and parietal regions, and on the right side of the frontotemporal area. MMI was stopped before total thyroidectomy, and symptoms resolved in the next 5 weeks. Six months after MMI was stopped, the brain MRI and SPECT had become normal. To our knowledge, this is the first report of CNS vasculitis related to MMI therapy.

EarthCube Cyberinfrastructure: The Importance of and Need for International Strategic Partnerships to Enhance Interconnectivity and Interoperability

NASA Astrophysics Data System (ADS)

Ramamurthy, M. K.; Lehnert, K.; Zanzerkia, E. E.

2017-12-01

The United States National Science Foundation's EarthCube program is a community-driven activity aimed at transforming the conduct of geosciences research and education by creating a well-connected cyberinfrastructure for sharing and integrating data and knowledge across all geoscience disciplines in an open, transparent, and inclusive manner and to accelerate our ability to understand and predict the Earth system. After five years of community engagement, governance, and development activities, EarthCube is now transitioning into an implementation phase. In the first phase of implementing the EarthCube architecture, the project leadership has identified the following architectural components as the top three priorities, focused on technologies, interfaces and interoperability elements that will address: a) Resource Discovery; b) Resource Registry; and c) Resource Distribution and Access. Simultaneously, EarthCube is exploring international partnerships to leverage synergies with other e-infrastructure programs and projects in Europe, Australia, and other regions and discuss potential partnerships and mutually beneficial collaborations to increase interoperability of systems for advancing EarthCube's goals in an efficient and effective manner. In this session, we will present the progress of EarthCube on a number of fronts and engage geoscientists and data scientists in the future steps toward the development of EarthCube for advancing research and discovery in the geosciences. The talk will underscore the importance of strategic partnerships with other like eScience projects and programs across the globe.

A new macroseismic intensity prediction equation and magnitude estimates of the 1811-1812 New Madrid and 1886 Charleston, South Carolina, earthquakes

NASA Astrophysics Data System (ADS)

Boyd, O. S.; Cramer, C. H.

2013-12-01

We develop an intensity prediction equation (IPE) for the Central and Eastern United States, explore differences between modified Mercalli intensities (MMI) and community internet intensities (CII) and the propensity for reporting, and estimate the moment magnitudes of the 1811-1812 New Madrid, MO, and 1886 Charleston, SC, earthquakes. We constrain the study with North American census data, the National Oceanic and Atmospheric Administration MMI dataset (responses between 1924 and 1985), and the USGS ';Did You Feel It?' CII dataset (responses between June, 2000 and August, 2012). The combined intensity dataset has more than 500,000 felt reports for 517 earthquakes with magnitudes between 2.5 and 7.2. The IPE has the basic form, MMI=c1+c2M+c3exp(λ)+c4λ. where M is moment magnitude and λ is mean log hypocentral distance. Previous IPEs use a limited dataset of MMI, do not differentiate between MMI and CII data in the CEUS, nor account for spatial variations in population. These factors can have an impact at all magnitudes, especially the last factor at large magnitudes and small intensities where the population drops to zero in the Atlantic Ocean and Gulf of Mexico. We assume that the number of reports of a given intensity have hypocentral distances that are log-normally distributed, the distribution of which is modulated by population and the propensity for individuals to report their experience. We do not account for variations in stress drop, regional variations in Q, or distance-dependent geometrical spreading. We simulate the distribution of reports of a given intensity accounting for population and use a grid search method to solve for the fraction of population to report the intensity, the standard deviation of the log-normal distribution and the mean log hypocentral distance, which appears in the above equation. We find that lower intensities, both CII and MMI, are less likely to be reported than greater intensities. Further, there are strong spatial variations in the level of CII reporting. For example, large metropolitan areas appear to have a lower level of reporting relative to rural areas. In general, we find that intensities decrease with increasing distance and decreasing magnitude, as expected. Coefficients for the IPE are c1=1.98×0.13 c2=1.76×0.02 c3=-0.0027×0.0004, and c4=-1.26×0.03. We find significant differences in mean log hypocentral distance between MMI- and CII-based reporting, particularly at smaller mean log distance and higher intensity. Values of mean log distance for CII at high intensity tend to be smaller than for MMI at the same value of intensity. The new IPE leads to magnitude estimates for the 1811-1812 New Madrid earthquakes that are within the broad range of those determined previously. Using three MMI datasets for the New Madrid mainshocks, the new relation results in estimates for the moment magnitudes of the December 16th, 1811, January 23rd, 1812, and February 7th, 1812 mainshocks and December 16th dawn aftershock of 7.1¬¬-7.4, 7.2, 7.5-7.7, and 6.7-7.2, respectively, with a magnitude uncertainty of about ×0.4 units. We estimate a magnitude of 7.0×0.3 for the 1886 Charleston, SC earthquake.

Quaternary Basalts in Grand Canyon: Correlation of Flows Using Lidar, 40Ar/39Ar Dating, Geochemical Correlation, Neotectonic Studies, and History of Lava Dams

NASA Astrophysics Data System (ADS)

Crow, R. S.; Karlstrom, K. E.; McIntosh, W. C.; Dunbar, N. W.; Peters, L.; Raucci, J.; Umhoefer, P. J.

2005-12-01

In western Grand Canyon, basalts flowed into the already existing canyon from at least 719 ka to present. These basalts provide a key for deciphering Quaternary rates of incision, neotectonic slip rates on the Toroweap and Hurricane faults, and the history of lava dams. Stratigraphy and/or inset relationships between basalt flows is exceedingly complex because of the multiple eruptions, extreme topography, long transport distance, and incomplete preservation. Correlation of flows using 40Ar/39Ar dating, LIDAR data, orthophotography, and geochemical analysis, as well as structural and geomorphic studies, lead to a working hypothesis for four major episodes of basaltic eruptive activity. From 719 to 484 Ma major volcanoes erupted near the Toroweap fault zone. The extent of the remnants and presence of 527 ka dikes indicates that cones where built within Grand Canyon during this phase. These flows had the longest outflow (719 ka flow at mile 246). At 349 to 296 ka flows seem to have entered the canyon at Whitmore Wash, north rim. The two remaining episodes, dated at 199-193 ka and 109-97 ka are interpreted to have cascaded into the canyon at and upstream from Whitmore Wash. LIDAR/orthophotography interpretation of the tops and bottoms of the flows and geochemical analysis of phenocrysts aid in correlation of undated remnants and reconstructing the shape of volcanic edifices. Flows dated from 720-450 ka include Prospect, Black Ledge, D-Dam, and Toroweap flows, thus Black Ledge flows are considerably older than previously thought. The 350 to 300 flows include Whitmore, Layered Diabase, Massive Diabase, and 177-mile flows. All the dated 200 and 100 ka flows have been called Grey Ledge flows, suggesting that the Grey Ledge represents two distinct events. Basalt data indicate an interaction of canyon incision and Quaternary fault slip. Bedrock incision rates are calculated using dated flows that overly bedrock straths. Rates vary across active faults indicating fault dampening of apparent river incision rates. Incision rates for eastern Grand Canyon are 127 m/my over 387 ka. Similar rates just east of the Toroweap faults (136 m/my over 349 ka and 153 m/my over 484 ka) suggest that a fairly uniform regional rate of ~ 140 m/my can be considered the average rate for Grand Canyon incision east of the Toroweap fault. This is subequal to the sum of apparent incision rate just below the Toroweap fault (56 m/my over 484 ka) plus fault slip rate (90 m/my over 550 ka). Similarly, apparent incision rates below the Hurricane fault (66 m/my over 527 ka and 76 m/my over 604 ka, near Granite Park) plus fault slip rate (~80±20 m/my over 185 ka) is subequal to the far field incision rate. Accumulating data suggests that apparent incision rates are lowest adjacent to faults in the hanging wall and highest adjacent to faults in the footwall, with rates varying systematically across fault blocks. This suggests that faulting is taking place by domino rotation of blocks bounded by normal faults with mild listric character. These new empirical data help constrain physical models for Quaternary fault slip across the active Colorado Plateau- Basin and Range bounding structures.

Evaluation results of xTCA equipment for HEP experiments at CERN

NASA Astrophysics Data System (ADS)

Di Cosmo, M.; Bobillier, V.; Haas, S.; Joos, M.; Mico, S.; Vasey, F.; Vichoudis, P.

2013-12-01

The MicroTCA and AdvancedTCA industry standards are candidate modular electronic platforms for the upgrade of the current generation of high energy physics experiments. The PH-ESE group at CERN launched in 2011 the xTCA evaluation project with the aim of performing technical evaluations and eventually providing support for commercially available components. Different devices from different vendors have been acquired, evaluated and interoperability tests have been performed. This paper presents the test procedures and facilities that have been developed and focuses on the evaluation results including electrical, thermal and interoperability aspects.

IEEE Smart Grid Series of Standards IEEE 2030 (Interoperability) and IEEE 1547 (Interconnection) Status: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Basso, T.; DeBlasio, R.

The IEEE American National Standards smart grid publications and standards development projects IEEE 2030, which addresses smart grid interoperability, and IEEE 1547TM, which addresses distributed resources interconnection with the grid, have made substantial progress since 2009. The IEEE 2030TM and 1547 standards series focus on systems-level aspects and cover many of the technical integration issues involved in a mature smart grid. The status and highlights of these two IEEE series of standards, which are sponsored by IEEE Standards Coordinating Committee 21 (SCC21), are provided in this paper.

The reliability and validity of multiple mini interviews (MMIs) in values based recruitment to nursing, midwifery and paramedic practice programmes: Findings from an evaluation study.

PubMed

Callwood, Alison; Cooke, Debbie; Bolger, Sarah; Lemanska, Agnieszka; Allan, Helen

2018-01-01

Universities in the United Kingdom (UK) are required to incorporate values based recruitment (VBR) into their healthcare student selection processes. This reflects an international drive to strengthen the quality of healthcare service provision. This paper presents novel findings in relation to the reliability and predictive validity of multiple mini interviews (MMIs); one approach to VBR widely being employed by universities. To examine the reliability (internal consistency) and predictive validity of MMIs using end of Year One practice outcomes of under-graduate pre-registration adult, child, mental health nursing, midwifery and paramedic practice students. Cross-discipline evaluation study. One university in the United Kingdom. Data were collected in two streams: applicants to A) The September 2014 and 2015 Midwifery Studies programmes; B) September 2015 adult; Child and Mental Health Nursing and Paramedic Practice programmes. Fifty-seven midwifery students commenced their programme in 2014 and 69 in 2015; 47 and 54 agreed to participate and completed Year One respectively. 333 healthcare students commenced their programmes in September 2015. Of these, 281 agreed to participate and completed their first year (180 adult, 33 child and 34 mental health nursing and 34 paramedic practice students). Stream A featured a seven station four-minute model with one interviewer at each station and in Stream B a six station model was employed. Cronbach's alpha was used to assess MMI station internal consistency and Pearson's moment correlation co-efficient to explore associations between participants' admission MMI score and end of Year one clinical practice outcomes (OSCE and mentor grading). Stream A: Significant correlations are reported between midwifery applicant's MMI scores and end of Year One practice outcomes. A multivariate linear regression model demonstrated that MMI score significantly predicted end of Year One practice outcomes controlling for age and academic entry level: coefficients 0.195 (p=0.002) and 0.116 (p=0.002) for OSCE and mentor grading respectively. In Stream B no significant correlations were found between MMI score and practice outcomes measured by mentor grading. Internal consistency for each MMI station was 'excellent' with values ranging from 0.966-0.974 across Streams A and B. This novel, cross-discipline study shows that MMIs are reliable VBR tools which have predictive validity when a seven station model is used. These data are important given the current international use of different MMI models in healthcare student selection processes. Copyright © 2017. Published by Elsevier Ltd.

Large Scale eHealth Deployment in Europe: Insights from Concurrent Use of Standards.

PubMed

Eichelberg, Marco; Chronaki, Catherine

2016-01-01

Large-scale eHealth deployment projects face a major challenge when called to select the right set of standards and tools to achieve sustainable interoperability in an ecosystem including both legacy systems and new systems reflecting technological trends and progress. There is not a single standard that would cover all needs of an eHealth project, and there is a multitude of overlapping and perhaps competing standards that can be employed to define document formats, terminology, communication protocols mirroring alternative technical approaches and schools of thought. eHealth projects need to respond to the important question of how alternative or inconsistently implemented standards and specifications can be used to ensure practical interoperability and long-term sustainability in large scale eHealth deployment. In the eStandards project, 19 European case studies reporting from R&D and large-scale eHealth deployment and policy projects were analyzed. Although this study is not exhaustive, reflecting on the concepts, standards, and tools for concurrent use and the successes, failures, and lessons learned, this paper offers practical insights on how eHealth deployment projects can make the most of the available eHealth standards and tools and how standards and profile developing organizations can serve the users embracing sustainability and technical innovation.

Before you make the data interoperable you have to make the people interoperable

NASA Astrophysics Data System (ADS)

Jackson, I.

2008-12-01

In February 2006 a deceptively simple concept was put forward. Could we use the International Year of Planet Earth 2008 as a stimulus to begin the creation of a digital geological map of the planet at a target scale of 1:1 million? Could we design and initiate a project that uniquely mobilises geological surveys around the world to act as the drivers and sustainable data providers of this global dataset? Further, could we synergistically use this geoscientist-friendly vehicle of creating a tangible geological map to accelerate progress of an emerging global geoscience data model and interchange standard? Finally, could we use the project to transfer know-how to developing countries and reduce the length and expense of their learning curve, while at the same time producing geoscience maps and data that could attract interest and investment? These aspirations, plus the chance to generate a global digital geological dataset to assist in the understanding of global environmental problems and the opportunity to raise the profile of geoscience as part of IYPE seemed more than enough reasons to take the proposal to the next stage. In March 2007, in Brighton, UK, 81 delegates from 43 countries gathered together to consider the creation of this global interoperable geological map dataset. The participants unanimously agreed the Brighton "Accord" and kicked off "OneGeology", an initiative that now has the support of more than 85 nations. Brighton was never designed to be a scientific or technical meeting: it was overtly about people and their interaction - would these delegates, with their diverse cultural and technical backgrounds, be prepared to work together to achieve something which, while technically challenging, was not complex in the context of leading edge geoscience informatics. Could we scale up what is a simple informatics model at national level, to deliver global coverage and access? The major challenges for OneGeology (and the deployment of interoperability) are rarely scientific or technical; they were and are the significantly more difficult logistical and "geopolitical - cultural" issues. OneGeology has grown and progressed rapidly to be an international project. It has not only achieved its first phase scientific and technical goals in launching its web map portal with map data from 30 nations at the International Geological Congress in August 2008, but has also attracted substantial scientific, public and media interest around the world. OneGeology is, in every sense, a child of its time - an agile Internet paradigm - a project whose informatics interoperability goals are in reality the total project ethos. The project has been allowed to grow and extend just as fast and as wide as its actors agree to take it, for the most part free from the territoriality and bureaucracy that all too often inhibit such initiatives. It is beyond doubt that a conventionally run (and thus constrained) OneGeology would not have achieved its goals. The OneGeology team has taken enormous strides in a very short space of time and the achievements are considerable. But some new challenges now arise. How will we sustain the project? Where do we take it next? Can OneGeology continue its "liberal" modus operandi? How should we fund and provide continuity for a growing and thus more demanding infrastructure and user base. Should we expand the portal to include map data from academia, commerce and the public (and how to maintain authentication if one does that?) How fast do we increase the sophistication of the informatics and the resolution and diversity of the data? The presentation will describe OneGeology, its current status and the technical and cultural issues involved in trying to move forward interoperability on a global scale.

Nonlinear Structural Health Monitoring of the Responsive Space Satellite Systems Using Magneto Elastic Active Sensors (MEAS)

DTIC Science & Technology

2011-11-30

detection of fatigue damage at early stage, well before onset of fracture and crack development. Analytical and numerical models of MEAS and MMI are...stage, well before onset of fracture and crack development. Analytical and numerical models of MEAS and MMI are suggested. Finally, MEAS capability...47  2.4.1  Far-Field Crack Detection

Acceleration in U.S. Mean Sea Level? A New Insight using Improved Tools

NASA Astrophysics Data System (ADS)

Watson, Phil J.

2016-08-01

The detection of acceleration in mean sea level around the data-rich margins of the United States has been a keen endeavour of sea-level researchers following the seminal work of Bruce Douglas in 1992. Over the past decade, such investigations have taken on greater prominence given mean sea level remains a key proxy by which to measure a changing climate system. The physics-based climate projection models are forecasting that the current global average rate of mean sea-level rise (≈3 mm/y) might climb to rates in the range of 10020 mm/y by 2100. Most research in this area has centred on reconciling current rates of rise with the significant accelerations required to meet the forecast projections of climate models. The analysis in this paper is based on a recently developed analytical package titled "msltrend," specifically designed to enhance estimates of trend, real-time velocity and acceleration in the relative mean sea-level signal derived from long annual average ocean-water-level time series. Key findings are that at the 95% confidence level, no consistent or substantial evidence (yet) exists that recent rates of rise are higher or abnormal in the context of the historical records available for the United States, nor does any evidence exist that geocentric rates of rise are above the global average. It is likely that a further 20 years of data will identify whether recent increases east of Galveston and along the east coast are evidence of the onset of climate change induced acceleration.

Intensity distribution and isoseismal maps for the Nisqually, Washington, earthquake of 28 February 2001

USGS Publications Warehouse

Dewey, James W.; Hopper, Margaret G.; Wald, David J.; Quitoriano, Vincent; Adams, Elizabeth R.

2002-01-01

We present isoseismal maps, macroseismic intensities, and community summaries of damage for the MW=6.8 Nisqually, Washington, earthquake of 28 February, 2001. For many communities, two types of macroseismic intensity are assigned, the traditional U.S. Geological Survey Modified Mercalli Intensities (USGS MMI) and a type of intensity newly introduced with this paper, the USGS Reviewed Community Internet Intensity (RCII). For most communities, the RCII is a reviewed version of the Community Internet Intensity (CII) of Wald and others (1999). For some communities, RCII is assigned from such non-CII sources as press reports, engineering reports, and field reconnaissance observations. We summarize differences between procedures used to assign RCII and USGS MMI, and we show that the two types of intensity are nonetheless very similar for the Nisqually earthquake. We do not see evidence for systematic differences between RCII and USGS MMI that would approach one intensity unit, at any level of shaking, but we document a tendency for the RCII to be slightly lower than MMI in regions of low intensity and slightly higher than MMI in regions of high intensity. The highest RCII calculated for the Nisqually earthquake is 7.6, calculated for zip code 98134, which includes the ?south of downtown? (Sodo) area of Seattle and Harbor Island. By comparison, we assigned a traditional USGS MMI 8 to the Sodo area of Seattle. In all, RCII of 6.5 and higher were assigned to 58 zip-code regions. At the lowest intensities, the Nisqually earthquake was felt over an area of approximately 350,000 square km (approximately 135,000 square miles) in Washington, Oregon, Idaho, Montana, and southern British Columbia, Canada. On the basis of macroseismic effects, we infer that shaking in the southern Puget Sound region was somewhat less for the 2001 Nisqually earthquake than for the Puget Sound earthquake of April 13, 1949, which had nearly the same hypocenter and magnitude. Allowing for differences in hypocenter, shaking in the 2001 earthquake was very similar to that produced by the Puget Sound earthquake of April 25, 1965. First-person accounts of the effects of the 2001 earthquake on individual households are given for some communities.

Promoting A-Priori Interoperability of HLA-Based Simulations in the Space Domain: The SISO Space Reference FOM Initiative

NASA Technical Reports Server (NTRS)

Moller, Bjorn; Garro, Alfredo; Falcone, Alberto; Crues, Edwin Z.; Dexter, Daniel E.

2016-01-01

Distributed and Real-Time Simulation plays a key-role in the Space domain being exploited for missions and systems analysis and engineering as well as for crew training and operational support. One of the most popular standards is the 1516-2010 IEEE Standard for Modeling and Simulation (M&S) High Level Architecture (HLA). HLA supports the implementation of distributed simulations (called Federations) in which a set of simulation entities (called Federates) can interact using a Run-Time Infrastructure (RTI). In a given Federation, a Federate can publish and/or subscribes objects and interactions on the RTI only in accordance with their structures as defined in a FOM (Federation Object Model). Currently, the Space domain is characterized by a set of incompatible FOMs that, although meet the specific needs of different organizations and projects, increases the long-term cost for interoperability. In this context, the availability of a reference FOM for the Space domain will enable the development of interoperable HLA-based simulators for related joint projects and collaborations among worldwide organizations involved in the Space domain (e.g. NASA, ESA, Roscosmos, and JAXA). The paper presents a first set of results achieved by a SISO standardization effort that aims at providing a Space Reference FOM for international collaboration on Space systems simulations.

Integrating technology to improve medication administration.

PubMed

Prusch, Amanda E; Suess, Tina M; Paoletti, Richard D; Olin, Stephen T; Watts, Starann D

2011-05-01

The development, implementation, and evaluation of an i.v. interoperability program to advance medication safety at the bedside are described. I.V. interoperability integrates intelligent infusion devices (IIDs), the bar-code-assisted medication administration system, and the electronic medication administration record system into a bar-code-driven workflow that populates provider-ordered, pharmacist-validated infusion parameters on IIDs. The purpose of this project was to improve medication safety through the integration of these technologies and decrease the potential for error during i.v. medication administration. Four key phases were essential to developing and implementing i.v. interoperability: (a) preparation, (b) i.v. interoperability pilot, (c) preliminary validation, and (d) expansion. The establishment of pharmacy involvement in i.v. interoperability resulted in two additional safety checks: pharmacist infusion rate oversight and nurse independent validation of the autoprogrammed rate. After instituting i.v. interoperability, monthly compliance to the telemetry drug library increased to a mean ± S.D. of 72.1% ± 2.1% from 56.5% ± 1.5%, and the medical-surgical nursing unit's drug library monthly compliance rate increased to 58.6% ± 2.9% from 34.1% ± 2.6% (p < 0.001 for both comparisons). The number of manual pump edits decreased with both telemetry and medical-surgical drug libraries, demonstrating a reduction from 56.9 ± 12.8 to 14.2 ± 3.9 and from 61.2 ± 15.4 to 14.7 ± 3.8, respectively (p < 0.001 for both comparisons). Through the integration and incorporation of pharmacist oversight for rate changes, the telemetry and medical-surgical patient care areas demonstrated a 32% reduction in reported monthly errors involving i.v. administration of heparin. By integrating two stand-alone technologies, i.v. interoperability was implemented to improve medication administration. Medication errors were reduced, nursing workflow was simplified, and pharmacists became involved in checking infusion rates of i.v. medications.

Do Multiple Mini-Interview and Traditional Interview Scores Differ in Their Associations With Acceptance Offers Within and Across Five California Medical Schools?

PubMed

Jerant, Anthony; Henderson, Mark C; Griffin, Erin; Hall, Theodore R; Kelly, Carolyn J; Peterson, Ellena M; Wofsy, David; Franks, Peter

2018-03-20

In single-school studies, multiple mini-interview (MMI) and traditional interview (TI) scores are associated with acceptance offers. Unexamined is whether scores at one school are associated with acceptance at other schools; such analyses would mitigate single-school design biases and better estimate how well interviews capture desired applicant attributes. Using data from the five California Longitudinal Evaluation of Admissions Practices (CA-LEAP) public medical schools, the authors examined associations of MMI and TI scores with acceptance offers within and across schools. The analyses included applicants who interviewed at ≥1 CA-LEAP school during the 2011-2013 admissions cycles, when three CA-LEAP schools employed TIs and two employed MMIs. Interview scores were standardized (z-scores: mean = 0, SD = 1) and associations with acceptance offers were examined within and across schools in analyses stratified by school, adjusting for applicant sociodemographics, academic metrics, year, and total number of interviews. Of 4,993 applicants interviewed, 428 (8.6%) interviewed at both MMI schools, 681 (13.6%) at ≥2 TI schools, and 1,327 (26.6%) at ≥1 MMI and ≥1 TI school. For each school, acceptance was associated with interview score at that school and also with interview scores at the other four schools. Cross-school associations of MMI versus TI scores with acceptance did not differ statistically. Interview score at a given CA-LEAP school was associated with acceptance at the other four schools, with no significant differences in associations for MMIs versus TIs. The findings suggest both MMIs and TIs captured attributes valued by admissions teams across CA-LEAP schools.

Dose-responses for mortality from cerebrovascular and heart diseases in atomic bomb survivors: 1950-2003.

PubMed

Schöllnberger, Helmut; Eidemüller, Markus; Cullings, Harry M; Simonetto, Cristoforo; Neff, Frauke; Kaiser, Jan Christian

2018-03-01

The scientific community faces important discussions on the validity of the linear no-threshold (LNT) model for radiation-associated cardiovascular diseases at low and moderate doses. In the present study, mortalities from cerebrovascular diseases (CeVD) and heart diseases from the latest data on atomic bomb survivors were analyzed. The analysis was performed with several radio-biologically motivated linear and nonlinear dose-response models. For each detrimental health outcome one set of models was identified that all fitted the data about equally well. This set was used for multi-model inference (MMI), a statistical method of superposing different models to allow risk estimates to be based on several plausible dose-response models rather than just relying on a single model of choice. MMI provides a more accurate determination of the dose response and a more comprehensive characterization of uncertainties. It was found that for CeVD, the dose-response curve from MMI is located below the linear no-threshold model at low and medium doses (0-1.4 Gy). At higher doses MMI predicts a higher risk compared to the LNT model. A sublinear dose-response was also found for heart diseases (0-3 Gy). The analyses provide no conclusive answer to the question whether there is a radiation risk below 0.75 Gy for CeVD and 2.6 Gy for heart diseases. MMI suggests that the dose-response curves for CeVD and heart diseases in the Lifespan Study are sublinear at low and moderate doses. This has relevance for radiotherapy treatment planning and for international radiation protection practices in general.

Single voxel magnetic resonance spectroscopy at 3 Tesla in a memory disorders clinic: early right hippocampal NAA/Cr loss in mildly impaired subjects.

PubMed

Caserta, Maria T; Ragin, Ann; Hermida, Adriana P; Ahrens, R John; Wise, Leon

2008-11-30

In this study, we use magnetic resonance spectroscopy (MRS) at 3 Tesla to measure N-acetyl aspartate (NAA), myo-inositol (mI) and choline (Cho) to creatine (Cr) ratios in R (right) and L (left) hippocampi (H) in 8 mildly memory impaired (MMI), 6 probable Alzheimer's Disease (PRAD), and 17 control subjects. NAA/Cr was significantly reduced in the RH in the MMI group and bilaterally in the PRAD group vs. controls. No other metabolite differences were noted between the three groups. Five MMI subjects have converted to PRAD in follow-up. These findings suggest that RH NAA/Cr ratios measured at 3 Tesla may be a sensitive marker of future progression to dementia in a clinically defined population with isolated memory complaints.

High performace silicon 2x2 optical switch based on a thermo-optically tunable multimode interference coupler and efficient electrodes.

PubMed

Rosa, Álvaro; Gutiérrez, Ana; Brimont, Antoine; Griol, Amadeu; Sanchis, Pablo

2016-01-11

Optical switches based on tunable multimode interference (MMI) couplers can simultaneously reduce the footprint and increase the tolerance against fabrication deviations. Here, a compact 2x2 silicon switch based on a thermo-optically tunable MMI structure with a footprint of only 0.005 mm(2) is proposed and demonstrated. The MMI structure has been optimized using a silica trench acting as a thermal isolator without introducing any substantial loss penalty or crosstalk degradation. Furthermore, the electrodes performance have significantly been improved via engineering the heater geometry and using two metallization steps. Thereby, a drastic power consumption reduction of around 90% has been demonstrated yielding to values as low as 24.9 mW. Furthermore, very fast switching times of only 1.19 µs have also been achieved.

A compact thermo-optical multimode-interference silicon-based 1 × 4 nano-photonic switch.

PubMed

Zhou, Haifeng; Song, Junfeng; Chee, Edward K S; Li, Chao; Zhang, Huijuan; Lo, Guoqiang

2013-09-09

An ultra-compact multimode-interference (MMI)-based 1 × 4 nano-photonic switch is demonstrated by employing silicon thermo-optical effect on SOI platform. The device performance is systematically characterized by comprehensively investigating the constituent building blocks, including 1 × 4 power splitter, 4 × 4 MMI coupler and groove-isolated thermo-optical heaters. An instructive model is established to statistically estimate the required power consumption and investigate the influence of the power imbalance of the 4 × 4 MMI coupler on the switching performance. At the designed wavelength of 1550 nm, the average insertion loss of different switching states is 1.7 dB, and the transmission imbalance is 1.05 dB. The worst extinction ratio and crosstalk of all the output ports reach 11.48 dB and -11.38 dB, respectively.

Launching an EarthCube Interoperability Workbench for Constructing Workflows and Employing Service Interfaces

NASA Astrophysics Data System (ADS)

Fulker, D. W.; Pearlman, F.; Pearlman, J.; Arctur, D. K.; Signell, R. P.

2016-12-01

A major challenge for geoscientists—and a key motivation for the National Science Foundation's EarchCube initiative—is to integrate data across disciplines, as is necessary for complex Earth-system studies such as climate change. The attendant technical and social complexities have led EarthCube participants to devise a system-of-systems architectural concept. Its centerpiece is a (virtual) interoperability workbench, around which a learning community can coalesce, supported in their evolving quests to join data from diverse sources, to synthesize new forms of data depicting Earth phenomena, and to overcome immense obstacles that arise, for example, from mismatched nomenclatures, projections, mesh geometries and spatial-temporal scales. The full architectural concept will require significant time and resources to implement, but this presentation describes a (minimal) starter kit. With a keep-it-simple mantra this workbench starter kit can fulfill the following four objectives: 1) demonstrate the feasibility of an interoperability workbench by mid-2017; 2) showcase scientifically useful examples of cross-domain interoperability, drawn, e.g., from funded EarthCube projects; 3) highlight selected aspects of EarthCube's architectural concept, such as a system of systems (SoS) linked via service interfaces; 4) demonstrate how workflows can be designed and used in a manner that enables sharing, promotes collaboration and fosters learning. The outcome, despite its simplicity, will embody service interfaces sufficient to construct—from extant components—data-integration and data-synthesis workflows involving multiple geoscience domains. Tentatively, the starter kit will build on the Jupyter Notebook web application, augmented with libraries for interfacing current services (at data centers involved in EarthCube's Council of Data Facilities, e.g.) and services developed specifically for EarthCube and spanning most geoscience domains.

Greater Yellowstone regional traveler and weather information system evaluation plan

DOT National Transportation Integrated Search

2002-04-19

The ITS Integration Program is being conducted to accelerate the integration and interoperability of intelligent transportation systems in metropolitan and rural areas. Projects approved for funding have been assessed as supporting the improvements o...

Numerical simulations for active tectonic processes: increasing interoperability and performance

NASA Technical Reports Server (NTRS)

Donnellan, A.; Fox, G.; Rundle, J.; McLeod, D.; Tullis, T.; Grant, L.

2002-01-01

The objective of this project is to produce a system to fully model earthquake-related data. This task develops simulation and analysis tools to study the physics of earthquakes using state-of-the-art modeling.

OAI and NASA's Scientific and Technical Information

NASA Technical Reports Server (NTRS)

Nelson, Michael L.; Rocker, JoAnne; Harrison, Terry L.

2002-01-01

The Open Archives Initiative Protocol for Metadata Harvesting (OAI-PMH) is an evolving protocol and philosophy regarding interoperability for digital libraries (DLs). Previously, "distributed searching" models were popular for DL interoperability. However, experience has shown distributed searching systems across large numbers of DLs to be difficult to maintain in an Internet environment. The OAI-PMH is a move away from distributed searching, focusing on the arguably simpler model of "metadata harvesting". We detail NASA s involvement in defining and testing the OAI-PMH and experience to date with adapting existing NASA distributed searching DLs (such as the NASA Technical Report Server) to use the OAI-PMH and metadata harvesting. We discuss some of the entirely new DL projects that the OAI-PMH has made possible, such as the Technical Report Interchange project. We explain the strategic importance of the OAI-PMH to the mission of NASA s Scientific and Technical Information Program.

Sustainable ubiquitous home health care--architectural considerations and first practical experiences.

PubMed

Marschollek, Michael; Wolf, Klaus-H; Bott, Oliver-J; Geisler, Mirko; Plischke, Maik; Ludwig, Wolfram; Hornberger, Andreas; Haux, Reinhold

2007-01-01

Despite the abundance of past home care projects and the maturity of the technologies used, there is no widespread dissemination as yet. The absence of accepted standards and thus interoperability and the inadequate integration into transinstitutional health information systems (tHIS) are perceived as key factors. Based on the respective literature and previous experiences in home care projects we propose an architectural model for home care as part of a transinstitutional health information system using the HL7 clinical document architecture (CDA) as well as the HL7 Arden Syntax for Medical Logic Systems. In two short case studies we describe the practical realization of the architecture as well as first experiences. Our work can be regarded as a first step towards an interoperable - and in our view sustainable - home care architecture based on a prominent document standard from the health information system domain.

Comparing spatial regression to random forests for large ...

EPA Pesticide Factsheets

Environmental data may be “large” due to number of records, number of covariates, or both. Random forests has a reputation for good predictive performance when using many covariates, whereas spatial regression, when using reduced rank methods, has a reputation for good predictive performance when using many records. In this study, we compare these two techniques using a data set containing the macroinvertebrate multimetric index (MMI) at 1859 stream sites with over 200 landscape covariates. Our primary goal is predicting MMI at over 1.1 million perennial stream reaches across the USA. For spatial regression modeling, we develop two new methods to accommodate large data: (1) a procedure that estimates optimal Box-Cox transformations to linearize covariate relationships; and (2) a computationally efficient covariate selection routine that takes into account spatial autocorrelation. We show that our new methods lead to cross-validated performance similar to random forests, but that there is an advantage for spatial regression when quantifying the uncertainty of the predictions. Simulations are used to clarify advantages for each method. This research investigates different approaches for modeling and mapping national stream condition. We use MMI data from the EPA's National Rivers and Streams Assessment and predictors from StreamCat (Hill et al., 2015). Previous studies have focused on modeling the MMI condition classes (i.e., good, fair, and po

Intravenous methimazole in the treatment of refractory hyperthyroidism.

PubMed

Hodak, Steven P; Huang, Caroline; Clarke, Donna; Burman, Kenneth D; Jonklaas, Jacqueline; Janicic-Kharic, Natasa

2006-07-01

Management of a hyperthyroid patient unable to take oral or rectal medication is a difficult clinical problem. The need for an alternative parenteral route of antithyroid medication administration in thyrotoxic patients occurs in certain rare cases, such as emergent gastrointestinal surgery, bowel ileus or obstruction, or severe vomiting and diarrhea. We report a simple and successful protocol for the preparation and use of intravenous methimazole (MMI) for treatment of hyperthyroidism in patients intolerant of orally and rectally administered thionamides. Five hundred milligrams of methimazole USP powder was reconstituted with pH-neutral 0.9% sodium chloride solution to a final volume of 50 mL using aseptic technique, then filtered through a 0.22-microm filter. MMI injection was administered as a slow intravenous push over 2 minutes and followed by a saline flush. A 76-year-old man, intolerant of oral and rectal medications because of an ileus and intractable diarrhea, who developed worsening thyrotoxicosis after an emergent spinal cord decompression, and a 42-year-old man with chronic liver disease and hyperthyroidism, requiring emergent exploratory laparotomy and maintenance of complete bowel rest because of persistent gastrointestinal bleeding were rendered euthyroid using intravenous MMI. Two cases of hyperthyroidism successfully treated with a preparation of intravenous MMI are described.

Individual differences in media multitasking and performance on the n-back.

PubMed

Ralph, Brandon C W; Smilek, Daniel

2017-02-01

A number of studies have recently examined the link between individual differences in media multitasking (using the MMI) and performance on working memory paradigms. However, these studies have yielded mixed results. Here we examine the relation between media multitasking and one particular working memory paradigm-the n-back (2- and 3-back)-improving upon previous research by (a) treating media multitasking as a continuous variable and adopting a correlational approach as well as (b) using a large sample of participants. First, we found that higher scores on the MMI were associated with a greater proportion of omitted trials on both the 2-back and 3-back, indicating that heavier media multitaskers were more disengaged during the n-back. In line with such a claim, heavier media multitaskers were also more likely to confess to responding randomly during various portions of the experiment, and to report media multitasking during the experiment itself. Importantly, when controlling for the relation between MMI scores and omissions, higher scores on the MMI were associated with an increase in false alarms, but not with a change in hits. These findings refine the extant literature on media multitasking and working memory performance (specifically, performance on the n-back), and suggest that media multitasking may be related to the propensity to disengage from ongoing tasks.

NASA UAS Integration into the NAS Project: Human Systems Integration

NASA Technical Reports Server (NTRS)

Shively, Jay

2016-01-01

This presentation provides an overview of the work the Human Systems Integration (HSI) sub-project has done on detect and avoid (DAA) displays while working on the UAS (Unmanned Aircraft System) Integration into the NAS project. The most recent simulation on DAA interoperability with Traffic Collision Avoidance System (TCAS) is discussed in the most detail. The relationship of the work to the larger UAS community and next steps are also detailed.

Contribution of Clinical Archetypes, and the Challenges, towards Achieving Semantic Interoperability for EHRs.

PubMed

Tapuria, Archana; Kalra, Dipak; Kobayashi, Shinji

2013-12-01

The objective is to introduce 'clinical archetype' which is a formal and agreed way of representing clinical information to ensure interoperability across and within Electronic Health Records (EHRs). The paper also aims at presenting the challenges building quality labeled clinical archetypes and the challenges towards achieving semantic interoperability between EHRs. Twenty years of international research, various European healthcare informatics projects and the pioneering work of the openEHR Foundation have led to the following results. The requirements for EHR information architectures have been consolidated within ISO 18308 and adopted within the ISO 13606 EHR interoperability standard. However, a generic EHR architecture cannot ensure that the clinical meaning of information from heterogeneous sources can be reliably interpreted by receiving systems and services. Therefore, clinical models called 'clinical archetypes' are required to formalize the representation of clinical information within the EHR. Part 2 of ISO 13606 defines how archetypes should be formally represented. The current challenge is to grow clinical communities to build a library of clinical archetypes and to identify how evidence of best practice and multi-professional clinical consensus should best be combined to define archetypes at the optimal level of granularity and specificity and quality label them for wide adoption. Standardizing clinical terms within EHRs using clinical terminology like Systematized Nomenclature of Medicine Clinical Terms is also a challenge. Clinical archetypes would play an important role in achieving semantic interoperability within EHRs. Attempts are being made in exploring the design and adoption challenges for clinical archetypes.

Mobile Inquiry Learning in Sweden: Development Insights on Interoperability, Extensibility and Sustainability of the LETS GO Software System

ERIC Educational Resources Information Center

Vogel, Bahtijar; Kurti, Arianit; Milrad, Marcelo; Johansson, Emil; Müller, Maximilian

2014-01-01

This paper presents the overall lifecycle and evolution of a software system we have developed in relation to the "Learning Ecology through Science with Global Outcomes" (LETS GO) research project. One of the aims of the project is to support "open inquiry learning" using mobile science collaboratories that provide open…

UAS in the NAS Flight Test Series 3 Overview

NASA Technical Reports Server (NTRS)

Murphy, James R.

2015-01-01

The UAS Integration in the NAS Project is conducting a series of flight tests to acheive the following objectives: 1.) Validate results previously collected during project simulations with live data 2.) Evaluate TCAS IISS interoperability 3.) Test fully integrated system in a relevant live test environment 4.) Inform final DAA and C2 MOPS 5.) Reduce risk for Flight Test Series 4.

The Athabasca University eduSource Project: Building an Accessible Learning Object Repository

ERIC Educational Resources Information Center

Cleveland-Innes, Martha; McGreal, Rory; Anderson, Terry; Friesen, Norm; Ally, Mohamed; Tin, Tony; Graham, Rodger; Moisey, Susan; Petrinjak, Anita; Schafer, Steve

2005-01-01

Athabasca University--Canada's Open University (AU) made the commitment to put all of its courses online as part of its Strategic University Plan. In pursuit of this goal, AU participated in the eduSource project, a pan-Canadian effort to build the infrastructure for an interoperable network of learning object repositories. AU acted as a leader in…

Dietary, anthropometric, and biochemical determinants of uric acid in free-living adults

PubMed Central

2013-01-01

Background High plasma uric acid (UA) is a prerequisite for gout and is also associated with the metabolic syndrome and its components and consequently risk factors for cardiovascular diseases. Hence, the management of UA serum concentrations would be essential for the treatment and/or prevention of human diseases and, to that end, it is necessary to know what the main factors that control the uricemia increase. The aim of this study was to evaluate the main factors associated with higher uricemia values analyzing diet, body composition and biochemical markers. Methods 415 both gender individuals aged 21 to 82 years who participated in a lifestyle modification project were studied. Anthropometric evaluation consisted of weight and height measurements with later BMI estimation. Waist circumference was also measured. The muscle mass (Muscle Mass Index – MMI) and fat percentage were measured by bioimpedance. Dietary intake was estimated by 24-hour recalls with later quantification of the servings on the Brazilian food pyramid and the Healthy Eating Index. Uric acid, glucose, triglycerides (TG), total cholesterol, urea, creatinine, gamma-GT, albumin and calcium and HDL-c were quantified in serum by the dry-chemistry method. LDL-c was estimated by the Friedewald equation and ultrasensitive C-reactive protein (CRP) by the immunochemiluminiscence method. Statistical analysis was performed by the SAS software package, version 9.1. Linear regression (odds ratio) was performed with a 95% confidence interval (CI) in order to observe the odds ratio for presenting UA above the last quartile (♂UA > 6.5 mg/dL and ♀ UA > 5 mg/dL). The level of significance adopted was lower than 5%. Results Individuals with BMI ≥ 25 kg/m2 OR = 2.28(1.13-4.6) and lower MMI OR = 13.4 (5.21-34.56) showed greater chances of high UA levels even after all adjustments (gender, age, CRP, gamma-gt, LDL, creatinine, urea, albumin, HDL-c, TG, arterial hypertension and glucose). As regards biochemical markers, higher triglycerides OR = 2.76 (1.55-4.90), US-CRP OR = 2.77 (1.07-7.21) and urea OR = 2.53 (1.19-5.41) were associated with greater chances of high UA (adjusted for gender, age, BMI, waist circumference, MMI, glomerular filtration rate, and MS). No association was found between diet and UA. Conclusions The main factors associated with UA increase were altered BMI (overweight and obesity), muscle hypotrophy (MMI), higher levels of urea, triglycerides, and CRP. No dietary components were found among uricemia predictors. PMID:23311699

Electronic toll collection/electronic screening interoperability pilot project : final report synthesis

DOT National Transportation Integrated Search

2005-12-02

In 1998, ITS America established a Blue Ribbon Panel on electronic commerce to study the convergence of transportation and electronic payment systems. Panel members included senior managers from government, toll agencies, motor carrier industry, and ...

Kalman approach to accuracy management for interoperable heterogeneous model abstraction within an HLA-compliant simulation

NASA Astrophysics Data System (ADS)

Leskiw, Donald M.; Zhau, Junmei

2000-06-01

This paper reports on results from an ongoing project to develop methodologies for representing and managing multiple, concurrent levels of detail and enabling high performance computing using parallel arrays within distributed object-based simulation frameworks. At this time we present the methodology for representing and managing multiple, concurrent levels of detail and modeling accuracy by using a representation based on the Kalman approach for estimation. The Kalman System Model equations are used to represent model accuracy, Kalman Measurement Model equations provide transformations between heterogeneous levels of detail, and interoperability among disparate abstractions is provided using a form of the Kalman Update equations.

Ocean Data Interoperability Platform (ODIP): using regional data systems for global ocean research

NASA Astrophysics Data System (ADS)

Schaap, D.; Thijsse, P.; Glaves, H.

2017-12-01

Ocean acidification, loss of coral reefs, sustainable exploitation of the marine environment are just a few of the challenges researchers around the world are currently attempting to understand and address. However, studies of these ecosystem level challenges are impossible unless researchers can discover and re-use the large volumes of interoperable multidisciplinary data that are currently only accessible through regional and global data systems that serve discreet, and often discipline specific, user communities. The plethora of marine data systems currently in existence are also using different standards, technologies and best practices making re-use of the data problematic for those engaged in interdisciplinary marine research. The Ocean Data Interoperability Platform (ODIP) is responding to this growing demand for discoverable, accessible and reusable data by establishing the foundations for a common global framework for marine data management. But creation of such an infrastructure is a major undertaking, and one that needs to be achieved in part by establishing different levels of interoperability across existing regional and global marine e-infrastructures. Workshops organised by ODIP II facilitate dialogue between selected regional and global marine data systems in an effort to identify potential solutions that integrate these marine e-infrastructures. The outcomes of these discussions have formed the basis for a number of prototype development tasks that aim to demonstrate effective sharing of data across multiple data systems, and allow users to access data from more than one system through a single access point. The ODIP II project is currently developing four prototype solutions that are establishing interoperability between selected regional marine data management infrastructures in Europe, the USA, Canada and Australia, and with the global POGO, IODE Ocean Data Portal (ODP) and GEOSS systems. The potential impact of implementing these solutions for the individual marine data infrastructures is also being evaluated to determine both the technical and financial implications of their integration within existing systems. These impact assessments form part of the strategy to encourage wider adoption of the ODIP solutions and approach beyond the current scope of the project.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Halbgewachs, Ronald D.; Chavez, Adrian R.

Process Control System (PCS) and Industrial Control System (ICS) security is critical to our national security. But there are a number of technological, economic, and educational impediments to PCS owners implementing effective security on their systems. Sandia National Laboratories has performed the research and development of the OPSAID (Open PCS Security Architecture for Interoperable Design), a project sponsored by the US Department of Energy Office of Electricity Delivery and Energy Reliability (DOE/OE), to address this issue. OPSAID is an open-source architecture for PCS/ICS security that provides a design basis for vendors to build add-on security devices for legacy systems, whilemore » providing a path forward for the development of inherently-secure PCS elements in the future. Using standardized hardware, a proof-of-concept prototype system was also developed. This report describes the improvements and capabilities that have been added to OPSAID since an initial report was released. Testing and validation of this architecture has been conducted in another project, Lemnos Interoperable Security Project, sponsored by DOE/OE and managed by the National Energy Technology Laboratory (NETL).« less

A novel wavelength multiplexer/demutiplexer based on side-port multimode interference coupler

NASA Astrophysics Data System (ADS)

Wei, Shile; Jian, Wu; Zhao, Lingjuan; Qiu, Jifang; Yin, Zuoshan; Hui, Rongqing

2014-05-01

Based on side-port multimode interference coupler, a novel design of 1.31/1.55-μm wavelength multiplexer/demutiplexer on SOI platform with conventional channel waveguides is proposed and analyzed by using wide-angle beam propagation method. With a 25.9μm long ultra-short MMI section, nearly an order of magnitude shorter than that of the previously reported 1.31/1.55-μm wavelength MMI splitters on SOI, simulation results exhibit contrasts of 28dB and 25dB at wavelength 1.31 and 1.55 μm, respectively, and the insertion losses are both below 0.55dB. Meanwhile, the analysis shows that the proposed structure has larger fabrication tolerances than restricted MMI based structures and the present design methodology also applies to split other wavelengths and in different material platforms, such as InP, GaAs and PLC guides, etc.

Temporally and spatially uniform rates of erosion in the southern Appalachian Great Smoky Mountains

USGS Publications Warehouse

Matmon, A.; Bierman, P.R.; Larsen, J.; Southworth, S.; Pavich, M.; Caffee, M.

2003-01-01

We measured 10Be in fluvial sediment samples (n = 27) from eight Great Smoky Mountain drainages (1-330 km2). Results suggest spatially homogeneous sediment generation (on the 104-105 yr time scale and > 100 km2 spatial scale) at 73 ?? 11 t km-2 yr-1, equivalent to 27 ?? 4 m/m.y. of bedrock erosion. This rate is consistent with rates derived from fission-track, long-term sediment budget, and sediment yield data, all of which indicate that the Great Smoky Mountains and the southern Appalachians eroded during the Mesozoic and Cenozoic at ???30 m/m.y. In contrast, unroofing rates during the Paleozoic orogenic events that formed the Appalachian Mountains were higher (???102 m/m.y.). Erosion rates decreased after termination of tectonically driven uplift, enabling the survival of this ancient mountain belt with its deep crustal root as an isostatically maintained feature in the contemporary landscape.

A case of methimazole-induced hypothyroidism in a patient with endemic goiter: effects of endogenous TSH hyperstimulation after discontinuation of the drug.

PubMed

Messina, M; Manieri, C; Spagnuolo, F; Sardi, E; Allegramente, L; Monaco, A; Ciccarelli, E

1989-04-01

Serum thyroid hormone and TSH concentrations were monitored in a patient with multinodular endemic goiter and severe methimazole (MMI) induced hypothyrodism up to 190 days after drug withdrawal. Serum concentrations of TT3, TT4 and TSH returned to normal values at the 6th., the 140th, and the 120th. day respectively. Within the first 20 days after MMI withdrawal the increase of serum T3 levels was correlated with the observed decrease of serum TSH concentrations. Successively T3 values decreased and T4 levels progressively increased. Six months after MMI withdrawal basal serum TSH concentration was normal while an exaggerated response to TRH was observed. We think that this peculiar hormone pattern is due to iodine depletion. In this case TSH hyperstimulation increases predominantly T3 secretion demonstrating the reduced thyroidal ability to produce T4 when hyperstimulated.

Slot silicon-gallium nitride waveguide in MMI structures based 1x8 wavelength demultiplexer

NASA Astrophysics Data System (ADS)

Ben Zaken, Bar Baruch; Zanzury, Tal; Malka, Dror

2017-06-01

We propose a novel 8-channel wavelength multimode interference (MMI) demultiplexer in slot waveguide structures that operated at 1530 nm, 1535 nm, 1540 nm, 1545 nm, 1550 nm, 1555 nm, 1560 nm and 1565 nm wavelengths. Gallium nitride (GaN) surrounded by silicon (Si) was founded as suitable materials for the slot-waveguide structures. The proposed device was designed by seven 1x2 MMI couplers, fourteen S-band and one input taper. Numerical investigations were carried out on the geometrical parameters by using a full vectorial-beam propagation method (FVBPM). Simulation results show that the proposed device can transmit 8-channel that works in the whole C-band (1530- 1565 nm) with low crosstalk ((-19.97)-(-13.77) dB) and bandwidth (1.8-3.6 nm). Thus, the device can be very useful in optical networking systems that work on dense wavelength division multiplexing (DWDM) technology.

Next Generation Air Quality Platform: Openness and Interoperability for the Internet of Things.

PubMed

Kotsev, Alexander; Schade, Sven; Craglia, Massimo; Gerboles, Michel; Spinelle, Laurent; Signorini, Marco

2016-03-18

The widespread diffusion of sensors, mobile devices, social media and open data are reconfiguring the way data underpinning policy and science are being produced and consumed. This in turn is creating both opportunities and challenges for policy-making and science. There can be major benefits from the deployment of the IoT in smart cities and environmental monitoring, but to realize such benefits, and reduce potential risks, there is an urgent need to address current limitations, including the interoperability of sensors, data quality, security of access and new methods for spatio-temporal analysis. Within this context, the manuscript provides an overview of the AirSensEUR project, which establishes an affordable open software/hardware multi-sensor platform, which is nonetheless able to monitor air pollution at low concentration levels. AirSensEUR is described from the perspective of interoperable data management with emphasis on possible use case scenarios, where reliable and timely air quality data would be essential.

Next Generation Air Quality Platform: Openness and Interoperability for the Internet of Things

PubMed Central

Kotsev, Alexander; Schade, Sven; Craglia, Massimo; Gerboles, Michel; Spinelle, Laurent; Signorini, Marco

2016-01-01

The widespread diffusion of sensors, mobile devices, social media and open data are reconfiguring the way data underpinning policy and science are being produced and consumed. This in turn is creating both opportunities and challenges for policy-making and science. There can be major benefits from the deployment of the IoT in smart cities and environmental monitoring, but to realize such benefits, and reduce potential risks, there is an urgent need to address current limitations, including the interoperability of sensors, data quality, security of access and new methods for spatio-temporal analysis. Within this context, the manuscript provides an overview of the AirSensEUR project, which establishes an affordable open software/hardware multi-sensor platform, which is nonetheless able to monitor air pollution at low concentration levels. AirSensEUR is described from the perspective of interoperable data management with emphasis on possible use case scenarios, where reliable and timely air quality data would be essential. PMID:26999160

Challenges and Approaches to Make Multidisciplinary Team Meetings Interoperable - The KIMBo Project.

PubMed

Krauss, Oliver; Holzer, Karl; Schuler, Andreas; Egelkraut, Reinhard; Franz, Barbara

2017-01-01

Multidisciplinary team meetings (MDTMs) are already in use for certain areas in healthcare (e.g. treatment of cancer). Due to the lack of common standards and accessibility for the applied IT systems, their potential is not yet completely exploited. Common requirements for MDTMs shall be identified and aggregated into a process definition to be automated by an application architecture utilizing modern standards in electronic healthcare, e.g. HL7 FHIR. To identify requirements, an extensive literature review as well as semi-structured expert interviews were conducted. Results showed, that interoperability and flexibility in terms of the process are key requirements to be addressed. An architecture blueprint as well as an aggregated process definition were derived from the insights gained. To evaluate the feasibility of identified requirements, methods of explorative prototyping in software engineering were used. MDTMs will become an important part of modern and future healthcare but the need for standardization in terms of interoperability is imminent.

Leveraging Available Technologies for Improved Interoperability and Visualization of Remote Sensing and In-situ Oceanographic data at the PO.DAAC

NASA Astrophysics Data System (ADS)

Tsontos, V. M.; Arms, S. C.; Thompson, C. K.; Quach, N.; Lam, T.

2016-12-01

Earth science applications increasingly rely on the integration of multivariate data from diverse observational platforms. Whether for satellite mission cal/val, science or decision support, the coupling of remote sensing and in-situ field data is integral also to oceanographic workflows. This has prompted archives such as the PO.DAAC, NASA's physical oceanographic data archive, that historically has had a remote sensing focus, to adapt to better accommodate complex field campaign datasets. However, the inherent heterogeneity of in-situ datasets and their variable adherence to meta/data standards poses a significant impediment to interoperability, a problem originating early in the data lifecycle and significantly impacting stewardship and usability of these data long-term. Here we introduce a new initiative underway at PO.DAAC that seeks to catalyze efforts to address these challenges. It involves the enhancement and integration of available high TRL (Technology Readiness level) components for improved interoperability and support of in-situ data with a focus on a novel yet representative class of oceanographic field data: data from electronic tags deployed on a variety of marine species as biological sampling platforms in support of fisheries management and ocean observation efforts. This project seeks to demonstrate, deliver and ultimately sustain operationally a reusable and accessible set of tools to: 1) mediate reconciliation of heterogeneous source data into a tractable number of standardized formats consistent with earth science data standards; 2) harmonize existing metadata models for satellite and field datasets; 3) demonstrate the value added of integrated data access via a range of available tools and services hosted at the PO.DAAC, including a web-based visualization tool for comprehensive mapping of satellite and in-situ data. An innovative part of our project plan involves partnering with the leading electronic tag manufacturer to promote the adoption of appropriate data standards in their processing software. The proposed project thus adopts a model lifecycle approach complimented by broadly applicable technologies to address key data management and interoperability issues for in-situ data

The GEOSS solution for enabling data interoperability and integrative research.

PubMed

Nativi, Stefano; Mazzetti, Paolo; Craglia, Max; Pirrone, Nicola

2014-03-01

Global sustainability research requires an integrative research effort underpinned by digital infrastructures (systems) able to harness data and heterogeneous information across disciplines. Digital data and information sharing across systems and applications is achieved by implementing interoperability: a property of a product or system to work with other products or systems, present or future. There are at least three main interoperability challenges a digital infrastructure must address: technological, semantic, and organizational. In recent years, important international programs and initiatives are focusing on such an ambitious objective. This manuscript presents and combines the studies and the experiences carried out by three relevant projects, focusing on the heavy metal domain: Global Mercury Observation System, Global Earth Observation System of Systems (GEOSS), and INSPIRE. This research work recognized a valuable interoperability service bus (i.e., a set of standards models, interfaces, and good practices) proposed to characterize the integrative research cyber-infrastructure of the heavy metal research community. In the paper, the GEOSS common infrastructure is discussed implementing a multidisciplinary and participatory research infrastructure, introducing a possible roadmap for the heavy metal pollution research community to join GEOSS as a new Group on Earth Observation community of practice and develop a research infrastructure for carrying out integrative research in its specific domain.

An open platform for promoting interoperability in solar system sciences

NASA Astrophysics Data System (ADS)

Csillaghy, André; Aboudarham, Jean; Berghmans, David; Jacquey, Christian

2013-04-01

The European coordination project CASSIS is promoting the creation of an integrated data space that will facilitate science across community boundaries in solar system sciences. Many disciplines may need to use the same data set to support scientific research, although the way they are used may depend on the project and on the particular piece of science. Often, access is hindered because of differences in the way the different communities describe, store their data, as well as how they make them accessible. Working towards this goal, we have set up an open collaboration platform, www.explorespace.eu, that can serve as a hub for discovering and developing interoperability resources in the communities involved. The platform is independent of the project and will be maintained well after the end of the funding. As a first step, we have captured the description of services already provided by the community. The openness of the collaboration platform should allow to discuss with all stakeholders ways to make key types of metadata and derived products more complete and coherent and thus more usable across the domain boundaries. Furthermore, software resources and discussions should help facilitating the development of interoperable services. The platform, along with the database of services, address the following questions, which we consider crucial for promoting interoperability: • Current extent of the data space coverage: What part of the common data space is already covered by the existing interoperable services in terms of data access. In other words, what data, from catalogues as well as from raw data, can be reached by an application through standard protocols today? • Needed extension of the data space coverage: What would be needed to extend the data space coverage? In other words, how can the currently accessible data space be extended by adding services? • Missing services: What applications / services are still missing and need to be developed? This is not a trivial question, as the generation of the common data space in itself creates new requirements on overarching applications that might be necessary to provide a unified access to all the services. As an example, one particular aspect discussed in the platform is the design of web services. Applications of today are mainly human centred while interoperability must happen one level below and the back ends (databases) must be generic, i.e. independent from the applications. We intent our effort to provide to developers resources that disentangle user interfaces from data services. Many activities are challenging and we hope they will be discussed on our platform. In particular, the quality of the services, the data space and the needs of interdisciplinary approaches are serious concerns for instruments such as ATST and EST or the ones onboard SDO and, in the future, Solar Orbiter. We believe that our platform might be useful as a kind of guide that would allow groups of not having to reinvent the wheel for each new instrument.

The 26 January 2001 M 7.6 Bhuj, India, earthquake: Observed and predicted ground motions

USGS Publications Warehouse

Hough, S.E.; Martin, S.; Bilham, R.; Atkinson, G.M.

2002-01-01

Although local and regional instrumental recordings of the devastating 26, January 2001, Bhuj earthquake are sparse, the distribution of macroseismic effects can provide important constraints on the mainshock ground motions. We compiled available news accounts describing damage and other effects and interpreted them to obtain modified Mercalli intensities (MMIs) at >200 locations throughout the Indian subcontinent. These values are then used to map the intensity distribution throughout the subcontinent using a simple mathematical interpolation method. Although preliminary, the maps reveal several interesting features. Within the Kachchh region, the most heavily damaged villages are concentrated toward the western edge of the inferred fault, consistent with western directivity. Significant sediment-induced amplification is also suggested at a number of locations around the Gulf of Kachchh to the south of the epicenter. Away from the Kachchh region, intensities were clearly amplified significantly in areas that are along rivers, within deltas, or on coastal alluvium, such as mudflats and salt pans. In addition, we use fault-rupture parameters inferred from teleseismic data to predict shaking intensity at distances of 0-1000 km. We then convert the predicted hard-rock ground-motion parameters to MMI by using a relationship (derived from Internet-based intensity surveys) that assigns MMI based on the average effects in a region. The predicted MMIs are typically lower by 1-3 units than those estimated from news accounts, although they do predict near-field ground motions of approximately 80%g and potentially damaging ground motions on hard-rock sites to distances of approximately 300 km. For the most part, this discrepancy is consistent with the expected effect of sediment response, but it could also reflect other factors, such as unusually high building vulnerability in the Bhuj region and a tendency for media accounts to focus on the most dramatic damage, rather than the average effects. The discrepancy may also be partly attributable to the inadequacy of the empirical relationship between MMI and peak ground acceleration (PGA), when applied to India. The MMI-PGA relationship was developed using data from California earthquakes, which might have a systematically different stress drop and therefore, a different frequency content than intraplate events. When a relationship between response spectra and MMI is used, we obtain larger predicted MMI values, in better agreement with the observations.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garzoglio, Gabriele

The Fermilab Grid and Cloud Computing Department and the KISTI Global Science experimental Data hub Center propose a joint project. The goals are to enable scientific workflows of stakeholders to run on multiple cloud resources by use of (a) Virtual Infrastructure Automation and Provisioning, (b) Interoperability and Federat ion of Cloud Resources , and (c) High-Throughput Fabric Virtualization. This is a matching fund project in which Fermilab and KISTI will contribute equal resources .

The GIIDA (Management of the CNR Environmental Data for Interoperability) project

NASA Astrophysics Data System (ADS)

Nativi, S.

2009-04-01

This work presents the GIIDA (Gestione Integrata e Interoperativa dei Dati Ambientali del CNR) inter-departimental project of the Italian National Research Council (CNR). The project is an initiative of the Earth and Environment Department (Dipartimento Terra e Ambiente) of the CNR. GIIDA mission is "To implement the Spatial Information Infrastructure (SII) of CNR for Environmental and Earth Observation data". The project aims to design and develop a multidisciplinary cyber-infrastructure for the management, processing and evaluation of Earth and environmental data. This infrastructure will contribute to the Italian presence in international projects and initiatives, such as: INSPIRE, GMES, GEOSS and SEIS. The main GIIDA goals are: • Networking: To create a network of CNR Institutes for implementing a common information space and sharing spatial resources. • Observation: Re-engineering the environmental observation system of CNR • Modeling: Re-engineering the environmental modeling system del CNR • Processing: Re-engineering the environmental processing system del CNR • Mediation: To define mediation methods and instruments for implementing the international interoperability standards. The project started in July 2008 releasing a specification document of the GIIDA architecture for interoperability and security. Based on these documents, a Call for Proposals was issued in September 2008. GIIDA received 23 proposed pilots from 16 different Institutes belonging to five CNR Departments and from 15 non-CNR Institutions (e.g. three Italian regional administrations, three national research centers, four universities, some SMEs). These pilot were divided into thematic areas. In fact, GIIDA considers seven main thematic areas/domains: • Biodiversity; • Climate Changes; • Air Quality; • Soil and Water Quality; • Risks; • Infrastructures for Research and Public Administrations; • Sea and Marine resources Each of these thematic areas is covered by a Working Group which coordinates the activities and the achievements of the respective pilots. Working Groups are called to develop for each area: 1) a specific Web Portal; 2) a thematic catalog service; 3) a thematic thesaurus service; 4) a thematic Wiki; 5) standard access and view services for thematic resources -such as: datasets, models, and processing services; 6) a couple of significant use scenarios to be demonstrated.

Human factor engineering based design and modernization of control rooms with new I and C systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larraz, J.; Rejas, L.; Ortega, F.

2012-07-01

Instrumentation and Control (I and C) systems of the latest nuclear power plants are based on the use of digital technology, distributed control systems and the integration of information in data networks (Distributed Control and Instrumentation Systems). This has a repercussion on Control Rooms (CRs), where the operations and monitoring interfaces correspond to these systems. These technologies are also used in modernizing I and C systems in currently operative nuclear power plants. The new interfaces provide additional capabilities for operation and supervision, as well as a high degree of flexibility, versatility and reliability. An example of this is the implementationmore » of solutions such as compact stations, high level supervision screens, overview displays, computerized procedures, new operational support systems or intelligent alarms processing systems in the modernized Man-Machine Interface (MMI). These changes in the MMI are accompanied by newly added Software (SW) controls and new solutions in automation. Tecnatom has been leading various projects in this area for several years, both in Asian countries and in the United States, using in all cases international standards from which Tecnatom own methodologies have been developed and optimized. The experience acquired in applying this methodology to the design of new control rooms is to a large extent applicable also to the modernization of current control rooms. An adequate design of the interface between the operator and the systems will facilitate safe operation, contribute to the prompt identification of problems and help in the distribution of tasks and communications between the different members of the operating shift. Based on Tecnatom experience in the field, this article presents the methodological approach used as well as the most relevant aspects of this kind of project. (authors)« less

Modified Mercalli intensity assignments for the May 16, 1909, Northern Plains earthquake

USGS Publications Warehouse

Bakun, W.H.; Stickney, M.C.; Rogers, G.; Ristau, J.

2010-01-01

We use newspaper accounts from the United States and Canada to assign modified Mercalli intensity (MMI) at 90 towns for the May 16, 1909 Northern Plains earthquake. Our MMI assignments generally are consistent with those plotted on Nuttli's (1976) isoseiemal map. The earthquake was felt over more than 1,500,000 km2 in the states of Minnesota, Montana, North Dakota, South Dakota, and Wyoming and the provinces of Alberta, Manitoba, Ontario, and Saskatchewan.

gene GIS: Computational Tools for Spatial Analyses of DNA Profiles with Associated Photo-Identification and Telemetry Records of Marine Mammals

DTIC Science & Technology

2011-09-30

DNA profiles. Referred to as geneGIS, the program will provide the ability to display, browse, select, filter and summarize spatial or temporal...of the SPLASH photo-identification records and available DNA profiles is underway through integration and crosschecking by Cascadia and MMI . An...Darwin Core standards where possible and can accommodate the current databases developed for telemetry data at MMI and SPLASH collection records at

geneGIS: Computational Tools for Spatial Analyses of DNA Profiles with Associated Photo-Identification and Telemetry Records of Marine Mammals

DTIC Science & Technology

2012-09-30

computational tools provide the ability to display, browse, select, filter and summarize spatio-temporal relationships of these individual-based...her research assistant at Esri, Shaun Walbridge, and members of the Marine Mammal Institute ( MMI ), including Tomas Follet and Debbie Steel. This...Genomics Laboratory, MMI , OSU. 4 As part of the geneGIS initiative, these SPLASH photo-identification records and the geneSPLASH DNA profiles

Unusual Synchronous Methimazole-Induced Agranulocytosis and Severe Hepatotoxicity in Patient with Hyperthyroidism: A Case Report and Review of the Literature

PubMed Central

Yang, Jun; Zhang, Jun; Xu, Qin; Sheng, Guo-ping; Weng, Wan-wen; Dong, Meng-jie

2015-01-01

Context. To report a patient with hyperthyroidism who developed concurrent occurrence of agranulocytosis and severe hepatotoxicity after taking methimazole (MMI). Case. A 51-year-old Chinese male was diagnosed as hyperthyroidism with normal white blood count and liver function. After 4 weeks' treatment with MMI 20 mg/d, it developed to agranulocytosis and severe cholestatic hepatotoxicity. The patient's symptoms and laboratory abnormalities disappeared after the withdrawal of MMI; his white blood count and liver function recover to normal in 2 weeks and 5 weeks, respectively. 296 MBq dose of 131I was given to the patient 3 weeks after the withdrawal of MMI and his thyroid function was back to normal in 6 months. As we know through literature review, only 5 previous cases reported the synchronous ATD-induced agranulocytosis and severe hepatotoxicity in patients with hyperthyroidism. Methods. Review of the patient's clinical course. Literature review of cases of hyperthyroidism with agranulocytosis and severe hepatotoxicity demonstrated that these complications occurred after taking antithyroid drug (ATD). Conclusions. Patient with hyperthyroidism can have synchronous ATD-induced agranulocytosis and severe hepatotoxicity. This case is extremely rare, but the adverse effects with ATDs is clinically significant. The clinicians need to be careful about this and monitor biochemical of patients who take ATDs. PMID:26060496

Development of a thyroperoxidase inhibition assay for high ...

EPA Pesticide Factsheets

High-throughput screening (HTPS) assays to detect inhibitors of thyroperoxidase (TPO), the enzymatic catalyst for thyroid hormone (TH) synthesis, are not currently available. Herein we describe the development of a HTPS TPO inhibition assay. Rat thyroid microsomes and a fluorescent peroxidase substrate, Amplex UltraRed (AUR, LifeTechnologies), were employed in an endpoint assay for comparison to the existing kinetic guaiacol (GUA) oxidation assay. Following optimization of assay metrics including Z’, dynamic range, and activity using methimazole (MMI), the assay was tested with a 21-chemical training set. The potency of MMI-induced TPO inhibition was greater with AUR compared to GUA. The dynamic range and Z’ score with MMI were as follows: 127-fold and 0.62 for the GUA assay, 18-fold and 0.86 for the 96-well AUR assay, and 11.5-fold and 0.93 for the 384-well AUR assay. The 384-well AUR assay drastically reduced animal use, requiring one-tenth of the rat thyroid microsomal protein needed for the GUA 96-well format assay. Fourteen chemicals inhibited TPO, with a relative potency ranking of MMI > ethylene thiourea > 6-propylthiouracil > 2,2’,4,4’-tetrahydroxy-benzophenone > 2-mercaptobenzothiazole > 3-amino-1,2,4-triazole > genistein > 4-propoxyphenol > sulfamethazine > daidzein > 4-nonylphenol > triclosan > iopanoic acid > resorcinol. These data demonstrate the capacity of this assay to detect diverse TPO inhibitors. Seven chemicals acted as negati

Contribution of Clinical Archetypes, and the Challenges, towards Achieving Semantic Interoperability for EHRs

PubMed Central

Kalra, Dipak; Kobayashi, Shinji

2013-01-01

Objectives The objective is to introduce 'clinical archetype' which is a formal and agreed way of representing clinical information to ensure interoperability across and within Electronic Health Records (EHRs). The paper also aims at presenting the challenges building quality labeled clinical archetypes and the challenges towards achieving semantic interoperability between EHRs. Methods Twenty years of international research, various European healthcare informatics projects and the pioneering work of the openEHR Foundation have led to the following results. Results The requirements for EHR information architectures have been consolidated within ISO 18308 and adopted within the ISO 13606 EHR interoperability standard. However, a generic EHR architecture cannot ensure that the clinical meaning of information from heterogeneous sources can be reliably interpreted by receiving systems and services. Therefore, clinical models called 'clinical archetypes' are required to formalize the representation of clinical information within the EHR. Part 2 of ISO 13606 defines how archetypes should be formally represented. The current challenge is to grow clinical communities to build a library of clinical archetypes and to identify how evidence of best practice and multi-professional clinical consensus should best be combined to define archetypes at the optimal level of granularity and specificity and quality label them for wide adoption. Standardizing clinical terms within EHRs using clinical terminology like Systematized Nomenclature of Medicine Clinical Terms is also a challenge. Conclusions Clinical archetypes would play an important role in achieving semantic interoperability within EHRs. Attempts are being made in exploring the design and adoption challenges for clinical archetypes. PMID:24523993

Clinical data integration model. Core interoperability ontology for research using primary care data.

PubMed

Ethier, J-F; Curcin, V; Barton, A; McGilchrist, M M; Bastiaens, H; Andreasson, A; Rossiter, J; Zhao, L; Arvanitis, T N; Taweel, A; Delaney, B C; Burgun, A

2015-01-01

This article is part of the Focus Theme of METHODS of Information in Medicine on "Managing Interoperability and Complexity in Health Systems". Primary care data is the single richest source of routine health care data. However its use, both in research and clinical work, often requires data from multiple clinical sites, clinical trials databases and registries. Data integration and interoperability are therefore of utmost importance. TRANSFoRm's general approach relies on a unified interoperability framework, described in a previous paper. We developed a core ontology for an interoperability framework based on data mediation. This article presents how such an ontology, the Clinical Data Integration Model (CDIM), can be designed to support, in conjunction with appropriate terminologies, biomedical data federation within TRANSFoRm, an EU FP7 project that aims to develop the digital infrastructure for a learning healthcare system in European Primary Care. TRANSFoRm utilizes a unified structural / terminological interoperability framework, based on the local-as-view mediation paradigm. Such an approach mandates the global information model to describe the domain of interest independently of the data sources to be explored. Following a requirement analysis process, no ontology focusing on primary care research was identified and, thus we designed a realist ontology based on Basic Formal Ontology to support our framework in collaboration with various terminologies used in primary care. The resulting ontology has 549 classes and 82 object properties and is used to support data integration for TRANSFoRm's use cases. Concepts identified by researchers were successfully expressed in queries using CDIM and pertinent terminologies. As an example, we illustrate how, in TRANSFoRm, the Query Formulation Workbench can capture eligibility criteria in a computable representation, which is based on CDIM. A unified mediation approach to semantic interoperability provides a flexible and extensible framework for all types of interaction between health record systems and research systems. CDIM, as core ontology of such an approach, enables simplicity and consistency of design across the heterogeneous software landscape and can support the specific needs of EHR-driven phenotyping research using primary care data.

Attachment 1 : appendices : electronic toll collection/electronic screening interoperability pilot project, supplement to the final report

DOT National Transportation Integrated Search

2005-07-29

In 1998, ITS America established a Blue Ribbon Panel on electronic commerce to study the convergence of transportation and electronic payment systems. Panel members included senior managers from government, toll agencies, motor carrier industry, and ...

Analysis of 90 cases of antithyroid drug-induced severe hepatotoxicity over 13 years in China.

PubMed

Yang, Jun; Li, Lin-Fa; Xu, Qin; Zhang, Jun; Weng, Wan-Wen; Zhu, Yang-Jun; Dong, Meng-Jie

2015-03-01

Antithyroid drug (ATD)-induced severe hepatotoxicity is a rare but serious complication of ATD therapy. The characteristics of severe hepatotoxicity have been reported in only a small number of patients. Ninety patients with ATD-induced severe hepatotoxicity presenting during a 13 year period (2000-2013) who were about to undergo nuclear medicine therapy with (131)I from a sample of 8864 patients with hyperthyroidism were studied, and the outcomes were evaluated. The mean age of the patients with ATD-induced severe hepatotoxicity was 41.6±12.5 years (mean±standard deviation), and the female to male ratio was 2.2:1. The methimazole (MMI) dose given at the onset was 19.1±7.4 mg/day. The propylthiouracil (PTU) dose given at the onset was 212.8±105.0 mg/day. ATD-induced severe hepatotoxicity occurred in 63.3%, 75.6%, and 81.1% of patients within 4, 8, and 12 weeks of the onset of ATD therapy, respectively. The types of severe hepatotoxicity did not differ significantly between the MMI and PTU groups (p=0.188). The frequency of the cholestatic type in the MMI group (35.3%, 18/51) was higher than that in the PTU group (17.9%, 7/39), but these frequencies were not significantly different (p=0.069). The patients who were treated with (131)I received an average dose of 279.1±86.1 MBq (n=84). Therapy was successful in 60 of the 67 patients (89.6%). The success rate was equivalent (p=0.696) between the groups receiving MMI (91.7%, 33/36) and PTU (87.1%, 27/31). Severe hepatotoxicity tends to occur within the first three months after the onset of ATD therapy. The type of ATD-induced severe hepatotoxicity did not differ between the MMI and PTU groups. (131)I therapy is an effective treatment approach for patients with ATD-induced severe hepatotoxicity.

A new design approach to MMI-based (de)multiplexers

NASA Astrophysics Data System (ADS)

Yueyu, Xiao; Sailing, He

2004-09-01

A novel design method of the wavelength (de)multiplexer is presented. The output spectral response of a (de)multiplexer is designed from the view of FIR filters. Avoiding laborious mathematic analysis, the (de)multiplexer is analyzed and designed in this explicit and simple method. A four channel (de)multiplexer based on multimode interference (MMI) is designed as an example. The result obtained agrees with that of the commonly used method, and is verified by a finite difference beam propagation method (FDBPM) simulation.

Classification VIA Information-Theoretic Fusion of Vector-Magnetic and Acoustic Sensor Data

DTIC Science & Technology

2007-04-01

10) where tBsBtBsBtBsBtsB zzyyxx, . (11) The operation in (10) may be viewed as a vector matched- filter on to estimate )(tB CPARv . In summary...choosing to maximize the classification information in Y are described in Section 3.2. A 3.2. Maximum mutual information ( MMI ) features We begin with a...review of several desirable properties of features that maximize a mutual information ( MMI ) criterion. Then we review a particular algorithm [2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stewart, John; Halbgewachs, Ron; Chavez, Adrian

The manner in which the control systems are being designed and operated in the energy sector is undergoing some of the most significant changes in history due to the evolution of technology and the increasing number of interconnections to other system. With these changes however come two significant challenges that the energy sector must face; 1) Cyber security is more important than ever before, and 2) Cyber security is more complicated than ever before. A key requirement in helping utilities and vendors alike in meeting these challenges is interoperability. While interoperability has been present in much of the discussions relatingmore » to technology utilized within the energy sector and especially the Smart Grid, it has been absent in the context of cyber security. The Lemnos project addresses these challenges by focusing on the interoperability of devices utilized within utility control systems which support critical cyber security functions. In theory, interoperability is possible with many of the cyber security solutions available to utilities today. The reality is that the effort required to achieve cyber security interoperability is often a barrier for utilities. For example, consider IPSec, a widely-used Internet Protocol to define Virtual Private Networks, or tunnels , to communicate securely through untrusted public and private networks. The IPSec protocol suite has a significant number of configuration options and encryption parameters to choose from, which must be agreed upon and adopted by both parties establishing the tunnel. The exercise in getting software or devices from different vendors to interoperate is labor intensive and requires a significant amount of security expertise by the end user. Scale this effort to a significant number of devices operating over a large geographical area and the challenge becomes so overwhelming that it often leads utilities to pursue solutions from a single vendor. These single vendor solutions may inadvertently lock utilities into proprietary and closed systems.« less

Data Publication and Interoperability for Long Tail Researchers via the Open Data Repository's (ODR) Data Publisher.

NASA Astrophysics Data System (ADS)

Stone, N.; Lafuente, B.; Bristow, T.; Keller, R.; Downs, R. T.; Blake, D. F.; Fonda, M.; Pires, A.

2016-12-01

Working primarily with astrobiology researchers at NASA Ames, the Open Data Repository (ODR) has been conducting a software pilot to meet the varying needs of this multidisciplinary community. Astrobiology researchers often have small communities or operate individually with unique data sets that don't easily fit into existing database structures. The ODR constructed its Data Publisher software to allow researchers to create databases with common metadata structures and subsequently extend them to meet their individual needs and data requirements. The software accomplishes these tasks through a web-based interface that allows collaborative creation and revision of common metadata templates and individual extensions to these templates for custom data sets. This allows researchers to search disparate datasets based on common metadata established through the metadata tools, but still facilitates distinct analyses and data that may be stored alongside the required common metadata. The software produces web pages that can be made publicly available at the researcher's discretion so that users may search and browse the data in an effort to make interoperability and data discovery a human-friendly task while also providing semantic data for machine-based discovery. Once relevant data has been identified, researchers can utilize the built-in application programming interface (API) that exposes the data for machine-based consumption and integration with existing data analysis tools (e.g. R, MATLAB, Project Jupyter - http://jupyter.org). The current evolution of the project has created the Astrobiology Habitable Environments Database (AHED)[1] which provides an interface to databases connected through a common metadata core. In the next project phase, the goal is for small research teams and groups to be self-sufficient in publishing their research data to meet funding mandates and academic requirements as well as fostering increased data discovery and interoperability through human-readable and machine-readable interfaces. This project is supported by the Science-Enabling Research Activity (SERA) and NASA NNX11AP82A, MSL. [1] B. Lafuente et al. (2016) AGU, submitted.

Academic Research Library as Broker in Addressing Interoperability Challenges for the Geosciences

NASA Astrophysics Data System (ADS)

Smith, P., II

2015-12-01

Data capture is an important process in the research lifecycle. Complete descriptive and representative information of the data or database is necessary during data collection whether in the field or in the research lab. The National Science Foundation's (NSF) Public Access Plan (2015) mandates the need for federally funded projects to make their research data more openly available. Developing, implementing, and integrating metadata workflows into to the research process of the data lifecycle facilitates improved data access while also addressing interoperability challenges for the geosciences such as data description and representation. Lack of metadata or data curation can contribute to (1) semantic, (2) ontology, and (3) data integration issues within and across disciplinary domains and projects. Some researchers of EarthCube funded projects have identified these issues as gaps. These gaps can contribute to interoperability data access, discovery, and integration issues between domain-specific and general data repositories. Academic Research Libraries have expertise in providing long-term discovery and access through the use of metadata standards and provision of access to research data, datasets, and publications via institutional repositories. Metadata crosswalks, open archival information systems (OAIS), trusted-repositories, data seal of approval, persistent URL, linking data, objects, resources, and publications in institutional repositories and digital content management systems are common components in the library discipline. These components contribute to a library perspective on data access and discovery that can benefit the geosciences. The USGS Community for Data Integration (CDI) has developed the Science Support Framework (SSF) for data management and integration within its community of practice for contribution to improved understanding of the Earth's physical and biological systems. The USGS CDI SSF can be used as a reference model to map to EarthCube Funded projects with academic research libraries facilitating the data and information assets components of the USGS CDI SSF via institutional repositories and/or digital content management. This session will explore the USGS CDI SSF for cross-discipline collaboration considerations from a library perspective.

Forcing Interoperability: An Intentionally Fractured Approach

NASA Astrophysics Data System (ADS)

Gallaher, D. W.; Brodzik, M.; Scambos, T.; Stroeve, J.

2008-12-01

The NSIDC is attempting to rebuild a significant portion of its public-facing cyberinfrastructure to better meet the needs expressed by the cryospheric community. The project initially addresses a specific science need - understanding Greenland's contribution to global sea level rise through comparison and analysis of variables such as temperature, albedo, melt, ice velocity and surface elevation. This project will ultimately be expanded to cover most of NSIDC's cryospheric data. Like many organizations, we need to provide users with data discovery interfaces, collaboration tools and mapping services. Complicating this effort is the need to reduce the volume of raw data delivered to the user. Data growth, especially with time-series data, will overwhelm our software, processors and network like never before. We need to provide the users the ability to perform first level analysis directly on our site. In order to accomplish this, the users should be free to modify the behavior of these tools as well as incorporate their own tools and analysis to meet their needs. Rather than building one monolithic project to build this system, we have chosen to build three semi-independent systems. One team is building a data discovery and web based distribution system, the second is building an advanced analysis and workflow system and the third is building a customized web mapping service. These systems will use the same underlying data structures and services but will employ different technologies and teams to build their objectives, schedules and user interfaces. Obviously, we are adding complexity and risk to the overall project however this may be the best method to achieve interoperability because the development teams will be required to build off each others work. The teams will be forced to design with other users in mind as opposed to building interoperability as an afterthought, which a tendency in monolithic systems. All three teams will take advantage of preexisting software and standards whenever possible. We present this topic to stimulate discussion within the development, operational and research communities on how best to proceed.

The Human Phenotype Ontology project: linking molecular biology and disease through phenotype data

PubMed Central

Köhler, Sebastian; Doelken, Sandra C.; Mungall, Christopher J.; Bauer, Sebastian; Firth, Helen V.; Bailleul-Forestier, Isabelle; Black, Graeme C. M.; Brown, Danielle L.; Brudno, Michael; Campbell, Jennifer; FitzPatrick, David R.; Eppig, Janan T.; Jackson, Andrew P.; Freson, Kathleen; Girdea, Marta; Helbig, Ingo; Hurst, Jane A.; Jähn, Johanna; Jackson, Laird G.; Kelly, Anne M.; Ledbetter, David H.; Mansour, Sahar; Martin, Christa L.; Moss, Celia; Mumford, Andrew; Ouwehand, Willem H.; Park, Soo-Mi; Riggs, Erin Rooney; Scott, Richard H.; Sisodiya, Sanjay; Vooren, Steven Van; Wapner, Ronald J.; Wilkie, Andrew O. M.; Wright, Caroline F.; Vulto-van Silfhout, Anneke T.; de Leeuw, Nicole; de Vries, Bert B. A.; Washingthon, Nicole L.; Smith, Cynthia L.; Westerfield, Monte; Schofield, Paul; Ruef, Barbara J.; Gkoutos, Georgios V.; Haendel, Melissa; Smedley, Damian; Lewis, Suzanna E.; Robinson, Peter N.

2014-01-01

The Human Phenotype Ontology (HPO) project, available at http://www.human-phenotype-ontology.org, provides a structured, comprehensive and well-defined set of 10,088 classes (terms) describing human phenotypic abnormalities and 13,326 subclass relations between the HPO classes. In addition we have developed logical definitions for 46% of all HPO classes using terms from ontologies for anatomy, cell types, function, embryology, pathology and other domains. This allows interoperability with several resources, especially those containing phenotype information on model organisms such as mouse and zebrafish. Here we describe the updated HPO database, which provides annotations of 7,278 human hereditary syndromes listed in OMIM, Orphanet and DECIPHER to classes of the HPO. Various meta-attributes such as frequency, references and negations are associated with each annotation. Several large-scale projects worldwide utilize the HPO for describing phenotype information in their datasets. We have therefore generated equivalence mappings to other phenotype vocabularies such as LDDB, Orphanet, MedDRA, UMLS and phenoDB, allowing integration of existing datasets and interoperability with multiple biomedical resources. We have created various ways to access the HPO database content using flat files, a MySQL database, and Web-based tools. All data and documentation on the HPO project can be found online. PMID:24217912

Exchange of Computable Patient Data between the Department of Veterans Affairs (VA) and the Department of Defense (DoD): Terminology Mediation Strategy

PubMed Central

Bouhaddou, Omar; Warnekar, Pradnya; Parrish, Fola; Do, Nhan; Mandel, Jack; Kilbourne, John; Lincoln, Michael J.

2008-01-01

Complete patient health information that is available where and when it is needed is essential to providers and patients and improves healthcare quality and patient safety. VA and DoD have built on their previous experience in patient data exchange to establish data standards and terminology services to enable real-time bi-directional computable (i.e., encoded) data exchange and achieve semantic interoperability in compliance with recommended national standards and the eGov initiative. The project uses RxNorm, UMLS, and SNOMED CT terminology standards to mediate codified pharmacy and allergy data with greater than 92 and 60 percent success rates respectively. Implementation of the project has been well received by users and is being expanded to multiple joint care sites. Stable and mature standards, mediation strategies, and a close relationship between healthcare institutions and Standards Development Organizations are recommended to achieve and maintain semantic interoperability in a clinical setting. PMID:18096911

Effect of time variation on coating characteristic of Ti-6Al-4V alloy coated with TiO2 by dip coating method

NASA Astrophysics Data System (ADS)

Hashim Aneed, Shaymaa

2018-05-01

In this reserch samples of Ti-6Al-4V alloy was coated with TiO2 layer by dip coating method in solution consist of 8 gm TiO2 nanoparticle dissolved in 100 ml. ethanol absolute (99%) and 1 gm P2O5, with various coating periods (1,2,3) minuts. The corrosion characteristics was investigated using (parstat 2273,USA made),the corrosion rate reach to 7.047 × 10-4 mm/y for sample coated at 3 minutes compared with 8.266 × 10-3mm/y for uncoated sample. Then the samples immersed in simulated body fluid (SBF) synthesized in the laboratory for one month in order to investigate the osseointegration from hydroxyapatite biomimatically formed, the corrosion charactaristics also invistigated after immirsing in (SBF) and it was 1.479 × 10-4 mm/y. For each part of reaserch we test the optical microscopic images,XRD and SEM in order to evaluate the results.

Multi-monochromatic imaging of defect-induced mix experiments at OMEGA

NASA Astrophysics Data System (ADS)

Mancini, Roberto; Johns, Heather; Joshi, Tirtha; Mayes, Daniel; Durmaz, Tunay; Nagayama, Taisuke; Hsu, Scott; Tregillis, Ian; Krasheninnikova, Natalia; Cobble, James; Murphy, Thomas; Shah, Rahul; Kyrala, George; Hakel, Peter; Bradley, Paul; Schmitt, Mark

2012-10-01

In a series of polar-drive implosions performed at OMEGA for the defect-induced mix experiment (DIME) campaign of Los Alamos National Laboratory, two identical multi-monochromatic imager (MMI) instruments were fielded to record gated, x-ray spectrally-resolved images of D-filled Ti-doped plastic shells. The shells included a defect on the equatorial plane to study defect-induced mix while no-defect shells were employed in reference shots. The MMI data recorded simultaneously along quasi-orthogonal lines-of-sight afforded unique observations of the implosion based on the K-shell spectral signatures of the Ti tracer. Several analysis techniques have been used to process the MMI data (T. Nagayama et al, J. App. Phys. 109, 093303 (2011)) in order to study defect-induced mixing by tracking the spatial distribution and state of the tracer. Comparisons were made with results from post-processed 2D and 3D simulations to provide further insight into the interpretation of the experimental results and to constrain the simulation physics model.

Bi-directional triplexer with butterfly MMI coupler using SU-8 polymer waveguides

NASA Astrophysics Data System (ADS)

Mareš, David; Jeřábek, Vítězslav; Prajzler, Václav

2015-01-01

We report about a design of a bi-directional planar optical multiplex/demultiplex filter (triplexer) for the optical part of planar hybrid WDM bi-directional transceiver in fiber-to-the-home (FTTH) PON applications. The triplex lightwave circuit is based on the Epoxy Novolak Resin SU-8 waveguides on the silica-on-silicon substrate with Polymethylmethacrylate cladding layer. The triplexer is comprised of a linear butterfly concept of multimode interference (MMI) coupler separating downstream optical signals of 1490 nm and 1550 nm. For the upstream channel of 1310 nm, an additional directional coupler (DC) is used to add optical signal of 1310 nm propagating in opposite direction. The optical triplexer was designed and optimized using beam propagation method. The insertion losses, crosstalk attenuation, and extinction ratio for all three inputs/outputs were investigated. The intended triplexer was designed using the parameters of the separated DC and MMI filter to approximate the idealized direct connection of both devices.

Resolution improvement in positron emission tomography using anatomical Magnetic Resonance Imaging.

PubMed

Chu, Yong; Su, Min-Ying; Mandelkern, Mark; Nalcioglu, Orhan

2006-08-01

An ideal imaging system should provide information with high-sensitivity, high spatial, and temporal resolution. Unfortunately, it is not possible to satisfy all of these desired features in a single modality. In this paper, we discuss methods to improve the spatial resolution in positron emission imaging (PET) using a priori information from Magnetic Resonance Imaging (MRI). Our approach uses an image restoration algorithm based on the maximization of mutual information (MMI), which has found significant success for optimizing multimodal image registration. The MMI criterion is used to estimate the parameters in the Sharpness-Constrained Wiener filter. The generated filter is then applied to restore PET images of a realistic digital brain phantom. The resulting restored images show improved resolution and better signal-to-noise ratio compared to the interpolated PET images. We conclude that a Sharpness-Constrained Wiener filter having parameters optimized from a MMI criterion may be useful for restoring spatial resolution in PET based on a priori information from correlated MRI.

Corrosion control when using passively treated abandoned mine drainage as alternative makeup water for cooling systems.

PubMed

Hsieh, Ming-Kai; Chien, Shih-Hsiang; Li, Heng; Monnell, Jason D; Dzombak, David A; Vidic, Radisav D

2011-09-01

Passively treated abandoned mine drainage (AMD) is a promising alternative to fresh water as power plant cooling water system makeup water in mining regions where such water is abundant. Passive treatment and reuse of AMD can avoid the contamination of surface water caused by discharge of abandoned mine water, which typically is acidic and contains high concentrations of metals, especially iron. The purpose of this study was to evaluate the feasibility of reusing passively treated AMD in cooling systems with respect to corrosion control through laboratory experiments and pilot-scale field testing. The results showed that, with the addition of the inhibitor mixture orthophosphate and tolyltriazole, mild steel and copper corrosion rates were reduced to acceptable levels (< 0.127 mm/y and < 0.0076 mm/y, respectively). Aluminum had pitting corrosion problems in every condition tested, while cupronickel showed that, even in the absence of any inhibitor and in the presence of the biocide monochloramine, its corrosion rate was still very low (0.018 mm/y).

Congenital anomalies in children exposed to antithyroid drugs in-utero: a meta-analysis of cohort studies.

PubMed

Li, Huixia; Zheng, Jianfei; Luo, Jiayou; Zeng, Rong; Feng, Na; Zhu, Na; Feng, Qi

2015-01-01

Hyperthyroidism affects about 0.2%-2.7% of all pregnancies, and is commonly managed with antithyroid drugs (ATDs). However, previous studies about the effects of ATDs on congenital anomalies are controversial. Therefore, the present meta-analysis was performed to explore the risk of congenital anomalies in children exposed to ATDs in-utero. Embase, Pubmed, Web of Knowledge, and BIOSIS Citation Index were searched to find out studies about congenital anomalies in children exposed to ATDs in-utero reported up to May 2014. The references cited by the retrieved articles were also searched. The relative risks (RRs) and confidence intervals (CIs) for the individual studies were pooled by fixed effects models, and heterogeneity was analyzed by chi-square and I2 tests. Eight studies met the inclusion criteria. Exposure to propylthiouracil (PTU), methimazole/carbimazole (MMI/CMZ), and PTU & MMI/CMZ was investigated in 7, 7 and 2 studies, respectively. The pooled RR was 1.20 (95%CI: 1.02-1.42), 1.64 (95%CI: 1.39-1.92), and 1.83 (95%CI: 1.30-2.56) for congenital anomalies after exposure to PTU, MMI/CMZ, and PTU & MMI/CMZ, respectively. The meta-analysis suggests that exposure to ATDs in-utero increases the risk of congenital anomalies. The use of ATDs in pregnancy should be limited when possible. Further research is needed to delineate the exact teratogenic risk for particular congenital anomaly.

Congenital Anomalies in Children Exposed to Antithyroid Drugs In-Utero: A Meta-Analysis of Cohort Studies

PubMed Central

Luo, Jiayou; Zeng, Rong; Feng, Na; Zhu, Na; Feng, Qi

2015-01-01

Background Hyperthyroidism affects about 0.2%-2.7% of all pregnancies, and is commonly managed with antithyroid drugs (ATDs). However, previous studies about the effects of ATDs on congenital anomalies are controversial. Therefore, the present meta-analysis was performed to explore the risk of congenital anomalies in children exposed to ATDs in-utero. Methods Embase, Pubmed, Web of Knowledge, and BIOSIS Citation Index were searched to find out studies about congenital anomalies in children exposed to ATDs in-utero reported up to May 2014. The references cited by the retrieved articles were also searched. The relative risks (RRs) and confidence intervals (CIs) for the individual studies were pooled by fixed effects models, and heterogeneity was analyzed by chi-square and I 2 tests. Results Eight studies met the inclusion criteria. Exposure to propylthiouracil (PTU), methimazole/carbimazole (MMI/CMZ), and PTU & MMI/CMZ was investigated in 7, 7 and 2 studies, respectively. The pooled RR was 1.20 (95%CI: 1.02-1.42), 1.64 (95%CI: 1.39-1.92), and 1.83 (95%CI: 1.30-2.56) for congenital anomalies after exposure to PTU, MMI/CMZ, and PTU & MMI/CMZ, respectively. Conclusions The meta-analysis suggests that exposure to ATDs in-utero increases the risk of congenital anomalies. The use of ATDs in pregnancy should be limited when possible. Further research is needed to delineate the exact teratogenic risk for particular congenital anomaly. PMID:25974033

Using Modified Mercalli Intensities to estimate acceleration response spectra for the 1906 San Francisco earthquake

USGS Publications Warehouse

Boatwright, J.; Bundock, H.; Seekins, L.C.

2006-01-01

We derive and test relations between the Modified Mercalli Intensity (MMI) and the pseudo-acceleration response spectra at 1.0 and 0.3 s - SA(1.0 s) and SA(0.3 s) - in order to map response spectral ordinates for the 1906 San Francisco earthquake. Recent analyses of intensity have shown that MMI ??? 6 correlates both with peak ground velocity and with response spectra for periods from 0.5 to 3.0 s. We use these recent results to derive a linear relation between MMI and log SA(1.0 s), and we refine this relation by comparing the SA(1.0 s) estimated from Boatwright and Bundock's (2005) MMI map for the 1906 earthquake to the SA(1.0 s) calculated from recordings of the 1989 Loma Prieta earthquake. South of San Jose, the intensity distributions for the 1906 and 1989 earthquakes are remarkably similar, despite the difference in magnitude and rupture extent between the two events. We use recent strong motion regressions to derive a relation between SA(1.0 s) and SA(0.3 s) for a M7.8 strike-slip earthquake that depends on soil type, acceleration level, and source distance. We test this relation by comparing SA(0.3 s) estimated for the 1906 earthquake to SA(0.3 s) calculated from recordings of both the 1989 Loma Prieta and 1994 Northridge earthquakes, as functions of distance from the fault. ?? 2006, Earthquake Engineering Research Institute.

Which Assessment Method of Malnutrition in Head and Neck Cancer?

PubMed

Saroul, Nicolas; Pastourel, Rémy; Mulliez, Aurélien; Farigon, Nicolas; Dupuch, Vincent; Mom, Thierry; Boirie, Yves; Gilain, Laurent

2018-06-01

Objective To assess the value of several diagnostic methods of nutritional status during the initial management of a head and neck cancer. Study Design Single-center prospective study. Setting Tertiary referral center. Subjects and Methods Ninety patients with head and neck cancer participated in the study. Assessment of their nutritional status was made with anthropometric, biological, body, and muscle measurements (the last by computed tomography: L3 muscle mass index [L3MMI]). Assessment of muscle performance (functional reflection of nutritional status) was made via the Short Physical Performance Battery test. The malnutrition thresholds were set according to the literature. Results Mean body mass index (BMI) was 24.6 ± 5.4 kg/m 2 . Mean weight loss and albumin levels were -4.5 ± 10.5 kg and 37.1 ± 5.2 g/L, respectively. Fourteen percent of patients were diagnosed as malnourished on the basis of BMI, 54% according to the Nutritional Risk Index (NRI), and 58% by L3MMI. There was 64% agreement between NRI and L3MMI ( P < .001). All patients identified as malnourished by BMI were considered as such by the other assessment methods; however, many malnourished patients had normal or high BMI. The Short Physical Performance Battery score was low particularly among patients considered to be the most undernourished by the other methods. Conclusion NRI and L3MMI are the best methods to identify patients as being malnourished. Functional muscle assessment can determine the severity of malnutrition.

OR.NET: a service-oriented architecture for safe and dynamic medical device interoperability.

PubMed

Kasparick, Martin; Schmitz, Malte; Andersen, Björn; Rockstroh, Max; Franke, Stefan; Schlichting, Stefan; Golatowski, Frank; Timmermann, Dirk

2018-02-23

Modern surgical departments are characterized by a high degree of automation supporting complex procedures. It recently became apparent that integrated operating rooms can improve the quality of care, simplify clinical workflows, and mitigate equipment-related incidents and human errors. Particularly using computer assistance based on data from integrated surgical devices is a promising opportunity. However, the lack of manufacturer-independent interoperability often prevents the deployment of collaborative assistive systems. The German flagship project OR.NET has therefore developed, implemented, validated, and standardized concepts for open medical device interoperability. This paper describes the universal OR.NET interoperability concept enabling a safe and dynamic manufacturer-independent interconnection of point-of-care (PoC) medical devices in the operating room and the whole clinic. It is based on a protocol specifically addressing the requirements of device-to-device communication, yet also provides solutions for connecting the clinical information technology (IT) infrastructure. We present the concept of a service-oriented medical device architecture (SOMDA) as well as an introduction to the technical specification implementing the SOMDA paradigm, currently being standardized within the IEEE 11073 service-oriented device connectivity (SDC) series. In addition, the Session concept is introduced as a key enabler for safe device interconnection in highly dynamic ensembles of networked medical devices; and finally, some security aspects of a SOMDA are discussed.

The National Capital Region closed circuit television video interoperability project.

PubMed

Contestabile, John; Patrone, David; Babin, Steven

2016-01-01

The National Capital Region (NCR) includes many government jurisdictions and agencies using different closed circuit TV (CCTV) cameras and video management software. Because these agencies often must work together to respond to emergencies and events, a means of providing interoperability for CCTV video is critically needed. Video data from different CCTV systems that are not inherently interoperable is represented in the "data layer." An "integration layer" ingests the data layer source video and normalizes the different video formats. It then aggregates and distributes this video to a "presentation layer" where it can be viewed by almost any application used by other agencies and without any proprietary software. A native mobile video viewing application is also developed that uses the presentation layer to provide video to different kinds of smartphones. The NCR includes Washington, DC, and surrounding counties in Maryland and Virginia. The video sharing architecture allows one agency to see another agency's video in their native viewing application without the need to purchase new CCTV software or systems. A native smartphone application was also developed to enable them to share video via mobile devices even when they use different video management systems. A video sharing architecture has been developed for the NCR that creates an interoperable environment for sharing CCTV video in an efficient and cost effective manner. In addition, it provides the desired capability of sharing video via a native mobile application.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Magee, Thoman

The Consolidated Edison, Inc., of New York (Con Edison) Secure Interoperable Open Smart Grid Demonstration Project (SGDP), sponsored by the United States (US) Department of Energy (DOE), demonstrated that the reliability, efficiency, and flexibility of the grid can be improved through a combination of enhanced monitoring and control capabilities using systems and resources that interoperate within a secure services framework. The project demonstrated the capability to shift, balance, and reduce load where and when needed in response to system contingencies or emergencies by leveraging controllable field assets. The range of field assets includes curtailable customer loads, distributed generation (DG), batterymore » storage, electric vehicle (EV) charging stations, building management systems (BMS), home area networks (HANs), high-voltage monitoring, and advanced metering infrastructure (AMI). The SGDP enables the seamless integration and control of these field assets through a common, cyber-secure, interoperable control platform, which integrates a number of existing legacy control and data systems, as well as new smart grid (SG) systems and applications. By integrating advanced technologies for monitoring and control, the SGDP helps target and reduce peak load growth, improves the reliability and efficiency of Con Edison’s grid, and increases the ability to accommodate the growing use of distributed resources. Con Edison is dedicated to lowering costs, improving reliability and customer service, and reducing its impact on the environment for its customers. These objectives also align with the policy objectives of New York State as a whole. To help meet these objectives, Con Edison’s long-term vision for the distribution grid relies on the successful integration and control of a growing penetration of distributed resources, including demand response (DR) resources, battery storage units, and DG. For example, Con Edison is expecting significant long-term growth of DG. The SGDP enables the efficient, flexible integration of these disparate resources and lays the architectural foundations for future scalability. Con Edison assembled an SGDP team of more than 16 different project partners, including technology vendors, and participating organizations, and the Con Edison team provided overall guidance and project management. Project team members are listed in Table 1-1.« less

SMART on FHIR: a standards-based, interoperable apps platform for electronic health records

PubMed Central

Kreda, David A; Mandl, Kenneth D; Kohane, Isaac S; Ramoni, Rachel B

2016-01-01

Objective In early 2010, Harvard Medical School and Boston Children’s Hospital began an interoperability project with the distinctive goal of developing a platform to enable medical applications to be written once and run unmodified across different healthcare IT systems. The project was called Substitutable Medical Applications and Reusable Technologies (SMART). Methods We adopted contemporary web standards for application programming interface transport, authorization, and user interface, and standard medical terminologies for coded data. In our initial design, we created our own openly licensed clinical data models to enforce consistency and simplicity. During the second half of 2013, we updated SMART to take advantage of the clinical data models and the application-programming interface described in a new, openly licensed Health Level Seven draft standard called Fast Health Interoperability Resources (FHIR). Signaling our adoption of the emerging FHIR standard, we called the new platform SMART on FHIR. Results We introduced the SMART on FHIR platform with a demonstration that included several commercial healthcare IT vendors and app developers showcasing prototypes at the Health Information Management Systems Society conference in February 2014. This established the feasibility of SMART on FHIR, while highlighting the need for commonly accepted pragmatic constraints on the base FHIR specification. Conclusion In this paper, we describe the creation of SMART on FHIR, relate the experience of the vendors and developers who built SMART on FHIR prototypes, and discuss some challenges in going from early industry prototyping to industry-wide production use. PMID:26911829

The DBCLS BioHackathon: standardization and interoperability for bioinformatics web services and workflows. The DBCLS BioHackathon Consortium*.

PubMed

Katayama, Toshiaki; Arakawa, Kazuharu; Nakao, Mitsuteru; Ono, Keiichiro; Aoki-Kinoshita, Kiyoko F; Yamamoto, Yasunori; Yamaguchi, Atsuko; Kawashima, Shuichi; Chun, Hong-Woo; Aerts, Jan; Aranda, Bruno; Barboza, Lord Hendrix; Bonnal, Raoul Jp; Bruskiewich, Richard; Bryne, Jan C; Fernández, José M; Funahashi, Akira; Gordon, Paul Mk; Goto, Naohisa; Groscurth, Andreas; Gutteridge, Alex; Holland, Richard; Kano, Yoshinobu; Kawas, Edward A; Kerhornou, Arnaud; Kibukawa, Eri; Kinjo, Akira R; Kuhn, Michael; Lapp, Hilmar; Lehvaslaiho, Heikki; Nakamura, Hiroyuki; Nakamura, Yasukazu; Nishizawa, Tatsuya; Nobata, Chikashi; Noguchi, Tamotsu; Oinn, Thomas M; Okamoto, Shinobu; Owen, Stuart; Pafilis, Evangelos; Pocock, Matthew; Prins, Pjotr; Ranzinger, René; Reisinger, Florian; Salwinski, Lukasz; Schreiber, Mark; Senger, Martin; Shigemoto, Yasumasa; Standley, Daron M; Sugawara, Hideaki; Tashiro, Toshiyuki; Trelles, Oswaldo; Vos, Rutger A; Wilkinson, Mark D; York, William; Zmasek, Christian M; Asai, Kiyoshi; Takagi, Toshihisa

2010-08-21

Web services have become a key technology for bioinformatics, since life science databases are globally decentralized and the exponential increase in the amount of available data demands for efficient systems without the need to transfer entire databases for every step of an analysis. However, various incompatibilities among database resources and analysis services make it difficult to connect and integrate these into interoperable workflows. To resolve this situation, we invited domain specialists from web service providers, client software developers, Open Bio* projects, the BioMoby project and researchers of emerging areas where a standard exchange data format is not well established, for an intensive collaboration entitled the BioHackathon 2008. The meeting was hosted by the Database Center for Life Science (DBCLS) and Computational Biology Research Center (CBRC) and was held in Tokyo from February 11th to 15th, 2008. In this report we highlight the work accomplished and the common issues arisen from this event, including the standardization of data exchange formats and services in the emerging fields of glycoinformatics, biological interaction networks, text mining, and phyloinformatics. In addition, common shared object development based on BioSQL, as well as technical challenges in large data management, asynchronous services, and security are discussed. Consequently, we improved interoperability of web services in several fields, however, further cooperation among major database centers and continued collaborative efforts between service providers and software developers are still necessary for an effective advance in bioinformatics web service technologies.

The DBCLS BioHackathon: standardization and interoperability for bioinformatics web services and workflows. The DBCLS BioHackathon Consortium*

PubMed Central

2010-01-01

Web services have become a key technology for bioinformatics, since life science databases are globally decentralized and the exponential increase in the amount of available data demands for efficient systems without the need to transfer entire databases for every step of an analysis. However, various incompatibilities among database resources and analysis services make it difficult to connect and integrate these into interoperable workflows. To resolve this situation, we invited domain specialists from web service providers, client software developers, Open Bio* projects, the BioMoby project and researchers of emerging areas where a standard exchange data format is not well established, for an intensive collaboration entitled the BioHackathon 2008. The meeting was hosted by the Database Center for Life Science (DBCLS) and Computational Biology Research Center (CBRC) and was held in Tokyo from February 11th to 15th, 2008. In this report we highlight the work accomplished and the common issues arisen from this event, including the standardization of data exchange formats and services in the emerging fields of glycoinformatics, biological interaction networks, text mining, and phyloinformatics. In addition, common shared object development based on BioSQL, as well as technical challenges in large data management, asynchronous services, and security are discussed. Consequently, we improved interoperability of web services in several fields, however, further cooperation among major database centers and continued collaborative efforts between service providers and software developers are still necessary for an effective advance in bioinformatics web service technologies. PMID:20727200

Quantitative analysis of the tectonic subsidence in the Potiguar Basin (NE Brazil)

NASA Astrophysics Data System (ADS)

Lopes, Juliana A. G.; de Castro, David L.; Bertotti, Giovanni

2018-06-01

The Potiguar Basin, located in the Brazilian Equatorial Margin, evolved from a complex rifting process implemented during the Atlantic Ocean opening in the Jurassic/Cretaceous. Different driving mechanisms were responsible for the onset of an aborted onshore rift and an offshore rift that initiated crustal rupture and the formation of a continental transform margin. Therefore, we applied the backstripping method to quantify the tectonic subsidence during the rift and post-rift phases of Potiguar Basin formation and to analyze the spatial variation of subsidence during the two successive and distinct tectonic events responsible for the basin evolution. The parameters required to apply this methodology were extracted from 2D seismic lines and exploratory well data. The tectonic subsidence curves present periods with moderate subsidence rates (up to 300 m/My), which correspond to the evolution of the onshore Potiguar Rift (∼141 to 128 Ma). From 128-118 Ma, the tectonic subsidence curves show no subsidence in the onshore Potiguar Basin, whereas subsidence occurred at high rates (over 300 m/My) in the offshore rift. The post-rift phase began ca. 118 Ma (Aptian), when the tectonic subsidence drastically slowed to less than 35 m/My, probably related to thermal relaxation. The tectonic subsidence rates in the various sectors of the Potiguar Rift, during the different rift phases, indicate that more intense faulting occurred in the southern portion of the onshore rift, along the main border faults, and in the southeastern portion of the offshore rift. During the post-rift phase, the tectonic subsidence rates increased from the onshore portion towards the offshore portion until the continental slope. The highest rates of post-rift subsidence (up to 35 m/My) are concentrated in the central region of the offshore portion and may be related to lithospheric processes related to the continental crust rupture and oceanic seafloor spreading. The variation in subsidence rates and the pattern of tectonic subsidence curves allowed us to interpret the tectonic signature recorded by the sedimentary sequences of the Potiguar Basin during its evolution. In the onshore rift area, the tectonic subsidence curves presented subsidence rates up to 300 m/My during a long-term rift phase (13 Ma), which confirmed that this portion had an extensional tectonic regime. In the offshore rift, the curves presented high subsidence rates of over 300 m/My in a shorter period (5-10 My), typical of basins formed in a transtensional tectonic regime.

Improving the Interoperability and Usability of NASA Earth Observation Data

NASA Astrophysics Data System (ADS)

Walter, J.; Berrick, S. W.; Murphy, K. J.; Mitchell, A. E.; Tilmes, C.

2014-12-01

NASA's Earth Science Data and Information System Project (ESDIS) is charged with managing, maintaining, and evolving NASA's Earth Observing System Data and Information System (EOSDIS) and is responsible for processing, archiving, and distributing NASA Earth Science data. The system supports a multitude of missions and serves diverse science research and other user communities. While NASA has made, and continues to make, great strides in the discoverability and accessibility of its earth observation data holdings, issues associated with data interoperability and usability still present significant challenges to realizing the full scientific and societal benefits of these data. This concern has been articulated by multiple government agencies, both U.S. and international, as well as other non-governmental organizations around the world. Among these is the White House Office of Science and Technology Policy who, in response, has launched the Big Earth Data Initiative and the Climate Data Initiative to address these concerns for U.S. government agencies. This presentation will describe NASA's approach for addressing data interoperability and usability issues with our earth observation data.

On the Execution Control of HLA Federations using the SISO Space Reference FOM

NASA Technical Reports Server (NTRS)

Moller, Bjorn; Garro, Alfredo; Falcone, Alberto; Crues, Edwin Z.; Dexter, Daniel E.

2017-01-01

In the Space domain the High Level Architecture (HLA) is one of the reference standard for Distributed Simulation. However, for the different organizations involved in the Space domain (e.g. NASA, ESA, Roscosmos, and JAXA) and their industrial partners, it is difficult to implement HLA simulators (called Federates) able to interact and interoperate in the context of a distributed HLA simulation (called Federation). The lack of a common FOM (Federation Object Model) for the Space domain is one of the main reasons that precludes a-priori interoperability between heterogeneous federates. To fill this lack a Product Development Group (PDG) has been recently activated in the Simulation Interoperability Standards Organization (SISO) with the aim to provide a Space Reference FOM (SRFOM) for international collaboration on Space systems simulations. Members of the PDG come from several countries and contribute experiences from projects within NASA, ESA and other organizations. Participants represent government, academia and industry. The paper presents an overview of the ongoing Space Reference FOM standardization initiative by focusing on the solution provided for managing the execution of an SRFOM-based Federation.

Uganda's National Transmission Backbone Infrastructure Project: Technical Challenges and the Way Forward

NASA Astrophysics Data System (ADS)

Bulega, T.; Kyeyune, A.; Onek, P.; Sseguya, R.; Mbabazi, D.; Katwiremu, E.

2011-10-01

Several publications have identified technical challenges facing Uganda's National Transmission Backbone Infrastructure project. This research addresses the technical limitations of the National Transmission Backbone Infrastructure project, evaluates the goals of the project, and compares the results against the technical capability of the backbone. The findings of the study indicate a bandwidth deficit, which will be addressed by using dense wave division multiplexing repeaters, leasing bandwidth from private companies. Microwave links for redundancy, a Network Operation Center for operation and maintenance, and deployment of wireless interoperability for microwave access as a last-mile solution are also suggested.

Recce NG: from Recce sensor to image intelligence (IMINT)

NASA Astrophysics Data System (ADS)

Larroque, Serge

2001-12-01

Recce NG (Reconnaissance New Generation) is presented as a complete and optimized Tactical Reconnaissance System. Based on a new generation Pod integrating high resolution Dual Band sensors, the system has been designed with the operational lessons learnt from the last Peace Keeping Operations in Bosnia and Kosovo. The technical solutions retained as component modules of a full IMINT acquisition system, take benefit of the state of art in the following key technologies: Advanced Mission Planning System for long range stand-off Manned Recce, Aircraft and/or Pod tasking, operating sophisticated back-up software tools, high resolution 3D geo data and improved/combat proven MMI to reduce planning delays, Mature Dual Band sensors technology to achieve the Day and Night Recce Mission, including advanced automatic operational functions, as azimuth and roll tracking capabilities, low risk in Pod integration and in carrier avionics, controls and displays upgrades, to save time in operational turn over and maintenance, High rate Imagery Down Link, for Real Time or Near Real Time transmission, fully compatible with STANAG 7085 requirements, Advanced IMINT Exploitation Ground Segment, combat proven, NATO interoperable (STANAG 7023), integrating high value software tools for accurate location, improved radiometric image processing and open link to the C4ISR systems. The choice of an industrial Prime contractor mastering across the full system, all the prior listed key products and technologies, is mandatory to a successful delivery in terms of low Cost, Risk and Time Schedule.

A facetless regrowth-free single mode laser based on MMI couplers

NASA Astrophysics Data System (ADS)

Caro, Ludovic; Kelly, Niall P.; Dernaika, Mohamad; Shayesteh, Maryam; Morrissey, Padraic E.; Alexander, Justin K.; Peters, Frank H.

2017-09-01

This paper presents a facetless, tunable laser operating near 1575 nm, as well as a theoretical model predicting spectral features of the laser. The lasers were fabricated without regrowth or advanced lithography techniques, and are based on MMI couplers and etched facets. Coarse vernier tuning was achieved over a range of 25 nm, while fine, thermal tuning was also demonstrated over a range of 1.5 nm. SMSR values of 25 dB and higher were observed, with a measured laser linewidth of 600 kHz.

Ontology Research and Development. Part 1-A Review of Ontology Generation.

ERIC Educational Resources Information Center

Ding, Ying; Foo, Schubert

2002-01-01

Discusses the role of ontology in knowledge representation, including enabling content-based access, interoperability, communications, and new levels of service on the Semantic Web; reviews current ontology generation studies and projects as well as problems facing such research; and discusses ontology mapping, information extraction, natural…

--No Title--

Science.gov Websites

interoperability emerging infrastructure for data management on computational grids Software Packages Services : ATLAS: Management and Steering: Computing Management Board Software Project Management Board Database Model Group Computing TDR: 4.5 Event Data 4.8 Database and Data Management Services 6.3.4 Production and

A Model Performance

ERIC Educational Resources Information Center

Thornton, Bradley D.; Smalley, Robert A.

2008-01-01

Building information modeling (BIM) uses three-dimensional modeling concepts, information technology and interoperable software to design, construct and operate a facility. However, BIM can be more than a tool for virtual modeling--it can provide schools with a 3-D walkthrough of a project while it still is on the electronic drawing board. BIM can…

Irvine Smart Grid Demonstration, a Regional Smart Grid Demonstration Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yinger, Robert; Irwin, Mark

ISGD was a comprehensive demonstration that spanned the electricity delivery system and extended into customer homes. The project used phasor measurement technology to enable substation-level situational awareness, and demonstrated SCE’s next-generation substation automation system. It extended beyond the substation to evaluate the latest generation of distribution automation technologies, including looped 12-kV distribution circuit topology using URCIs. The project team used DVVC capabilities to demonstrate CVR. In customer homes, the project evaluated HAN devices such as smart appliances, programmable communicating thermostats, and home energy management components. The homes were also equipped with energy storage, solar PV systems, and a number ofmore » energy efficiency measures (EEMs). The team used one block of homes to evaluate strategies and technologies for achieving ZNE. A home achieves ZNE when it produces at least as much renewable energy as the amount of energy it consumes annually. The project also assessed the impact of device-specific demand response (DR), as well as load management capabilities involving energy storage devices and plug-in electric vehicle charging equipment. In addition, the ISGD project sought to better understand the impact of ZNE homes on the electric grid. ISGD’s SENet enabled end-to-end interoperability between multiple vendors’ systems and devices, while also providing a level of cybersecurity that is essential to smart grid development and adoption across the nation. The ISGD project includes a series of sub-projects grouped into four logical technology domains: Smart Energy Customer Solutions, Next-Generation Distribution System, Interoperability and Cybersecurity, and Workforce of the Future. Section 2.3 provides a more detailed overview of these domains.« less

Arbitrary-ratio power splitter based on nonlinear multimode interference coupler

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tajaldini, Mehdi; Young Researchers and Elite Club, Baft Branch, Islamic Azad University, Baft; Jafri, Mohd Zubir Mat

2015-04-24

We propose an ultra-compact multimode interference (MMI) power splitter based on nonlinear effects from simulations using nonlinear modal propagation analysis (NMPA) cooperation with finite difference Method (FDM) to access free choice of splitting ratio. Conventional multimode interference power splitter could only obtain a few discrete ratios. The power splitting ratio may be adjusted continuously while the input set power is varying by a tunable laser. In fact, using an ultra- compact MMI with a simple structure that is launched by a tunable nonlinear input fulfills the problem of arbitrary-ratio in integrated photonics circuits. Silicon on insulator (SOI) is used asmore » the offered material due to the high contrast refractive index and Centro symmetric properties. The high-resolution images at the end of the multimode waveguide in the simulated power splitter have a high power balance, whereas access to a free choice of splitting ratio is not possible under the linear regime in the proposed length range except changes in the dimension for any ratio. The compact dimensions and ideal performance of the device are established according to optimized parameters. The proposed regime can be extended to the design of M×N arbitrary power splitters ratio for programmable logic devices in all optical digital signal processing. The results of this study indicate that nonlinear modal propagation analysis solves the miniaturization problem for all-optical devices based on MMI couplers to achieve multiple functions in a compact planar integrated circuit and also overcomes the limitations of previously proposed methods for nonlinear MMI.« less

Differences in Femoral Head Penetration Between Highly Cross-Linked Polyethylene Cemented Sockets and Uncemented Liners.

PubMed

Morita, Daigo; Seki, Taisuke; Higuchi, Yoshitoshi; Takegami, Yasuhiko; Ishiguro, Naoki

2017-12-01

This study aimed at investigating differences in femoral head penetration between highly cross-linked polyethylene (HXLPE) cemented sockets and uncemented liners during 5 years postoperatively. Ninety-six patients (106 hips) with a mean age of 64.4 (range, 35-83) years underwent total hip arthroplasty using a HXLPE cemented socket or liner and were respectively divided into cemented (35 patients [37 hips]) and uncemented (61 patients [69 hips]) groups. Femoral head penetrations were evaluated on both anteroposterior (AP)-view and Lauenstein-view radiographs, and mean polyethylene (PE) wear rates were calculated based on femoral head penetration from 2 to 5 years. Multivariate analyses were performed to assess risk factors for PE wear. At 5 years postoperatively, the cemented and uncemented groups exhibited proximal direction femoral head penetrations of 0.103 mm and 0.124 mm (P = .226) and anterior direction penetrations of 0.090 mm and 0.151 mm (P = .002), respectively. The corresponding mean PE wear rates were 0.004 mm/y and 0.009 mm/y in the AP-view (P = .286) and 0.005 mm/y and 0.012 mm/y in the Lauenstein-view (P = .168), respectively. Left-side operation and high activity were independent risk factors for PE wear on AP-view. When HXLPE was used, all mean PE wear rates were very low and those of cemented sockets and uncemented liners were very similar. PE particle theory suggests that the occurrence of osteolysis and related aseptic loosening might consequently decrease. Copyright © 2017 Elsevier Inc. All rights reserved.

Bilateral medial medullary infarction: a systematic review.

PubMed

Pongmoragot, Jitphapa; Parthasarathy, Sujatha; Selchen, Daniel; Saposnik, Gustavo

2013-08-01

Bilateral infarction of the medial medulla (MMI) is rare. Limited information is available on clinical characteristics, etiology, and prognosis. High-resolution neuroimaging has a major role in elucidating the underlying stroke mechanism. The aim of this systematic review was to analyze the clinical presentations, stroke mechanisms, and outcomes in patients with bilateral MMI. We performed a systematic review of the literature from 1992-2011 that reported on clinical presentations, stroke mechanism, and/or outcomes in patients with magnetic resonance imaging-proven bilateral MMI. Medline, EMBASE, and Web of Science Scholars Portal were searched without language restriction. Two reviewers independently assessed identified studies to determine eligibility, validity, and quality. The primary outcome was inpatient mortality; a secondary outcome was case fatality at 12 months. We identified 138 articles from Medline, EMBASE, and Scholars Portal including the MeSH terms "brainstem infarction," "medulla," and "bilateral." Twenty-nine articles met our inclusion criteria, including a total of 38 cases with bilateral MMI, and included in our study. These 38 patients had a mean age of 62.2 years and were predominately male (74.2%). The most common clinical presentations were motor weakness in 78.4%, dysarthria in 48.6%, and hypoglossal palsy in 40.5%. The most common vascular pathology was vertebral artery atherosclerosis, in 38.5%. The clinical outcome was poor (mortality, 23.8%; dependency, 61.9%). Bilateral medial medullary infarction is a rare stroke syndrome. Clinical presentations were mostly rostral medullary lesions. Large-artery atherosclerosis and branch disease were the most common stroke mechanisms. The clinical outcome was usually poor. Copyright © 2013 National Stroke Association. Published by Elsevier Inc. All rights reserved.

Multi-disciplinary interoperability challenges (Ian McHarg Medal Lecture)

NASA Astrophysics Data System (ADS)

Annoni, Alessandro

2013-04-01

Global sustainability research requires multi-disciplinary efforts to address the key research challenges to increase our understanding of the complex relationships between environment and society. For this reason dependence on ICT systems interoperability is rapidly growing but, despite some relevant technological improvement is observed, in practice operational interoperable solutions are still lacking. Among the causes is the absence of a generally accepted definition of "interoperability" in all its broader aspects. In fact the concept of interoperability is just a concept and the more popular definitions are not addressing all challenges to realize operational interoperable solutions. The problem become even more complex when multi-disciplinary interoperability is required because in that case solutions for interoperability of different interoperable solution should be envisaged. In this lecture the following definition will be used: "interoperability is the ability to exchange information and to use it". In the lecture the main challenges for addressing multi-disciplinary interoperability will be presented and a set of proposed approaches/solutions shortly introduced.

SOI ring resonators with controllable MMI coupler sections

NASA Astrophysics Data System (ADS)

Hu, Youfang; Gardes, Frédéric Y.; Mashanovich, Goran Z.; Reed, Graham T.

2011-01-01

A ring resonator using a single 2×2 MMI as the coupler section has the distinct advantages of low sensitivity to fabrication error, temperature, wavelength and polarisation. However, the coupling coefficient of the 2×2 MMI coupler is fixed; hence, the performance of this type of device is limited, e.g. transmission spectrum with high extinction ratio is difficult to achieve. We have designed and simulated ring resonators with coupler sections consisting of two 2×2 MMIs and phase shifters, so that the coupling efficiency can be varied from 0% to 100% with relative ease. For a single ring resonator, the transmission spectrum can be controlled to achieve an extinction ratio of >20dB and a spectral bandwidth of <1nm. For a multiple ring filter, the transmission spectrum can be controlled to achieve an extinction ratio of >30dB and a bandwidth of <1nm in addition, a flat-top transmission spectrum is also achievable. The whole device has a footprint of approximately 200μm by 100μm.

Tunable multiwavelength Tm-doped fiber laser based on the multimode interference effect.

PubMed

Zhang, Peng; Wang, Tianshu; Ma, Wanzhuo; Dong, Keyan; Jiang, Huilin

2015-05-20

A simple multiwavelength Tm-doped fiber laser at the 2 μm band based on multimode interference (MMI) is proposed and experimentally demonstrated. In this scheme, a 4 m Tm-doped single-mode fiber is pumped by a 1568 nm laser, and a single-mode-multimode-single-mode (SMS) fiber structure is used as an MMI filter in which the multimode fiber is used to tune the laser. Laser operation of up to three wavelengths is obtained based on the MMI filter. The wavelengths can be tuned by adjusting the polarization controller and rotating the multimode fiber in the SMS structure, and the tuning region is about 24 nm, i.e., 1892-1916 nm. The side-mode suppression ratio of the laser is about 54 dB. The 3 dB linewidth is less than 0.04 nm. Peak fluctuation at each wavelength is analyzed, and the results show that the power fluctuation is less than 3 dB around the average power.

Application of ESE Data and Tools to Air Quality Management: Services for Helping the Air Quality Community use ESE Data (SHAirED)

NASA Technical Reports Server (NTRS)

Falke, Stefan; Husar, Rudolf

2011-01-01

The goal of this REASoN applications and technology project is to deliver and use Earth Science Enterprise (ESE) data and tools in support of air quality management. Its scope falls within the domain of air quality management and aims to develop a federated air quality information sharing network that includes data from NASA, EPA, US States and others. Project goals were achieved through a access of satellite and ground observation data, web services information technology, interoperability standards, and air quality community collaboration. In contributing to a network of NASA ESE data in support of particulate air quality management, the project will develop access to distributed data, build Web infrastructure, and create tools for data processing and analysis. The key technologies used in the project include emerging web services for developing self describing and modular data access and processing tools, and service oriented architecture for chaining web services together to assemble customized air quality management applications. The technology and tools required for this project were developed within DataFed.net, a shared infrastructure that supports collaborative atmospheric data sharing and processing web services. Much of the collaboration was facilitated through community interactions through the Federation of Earth Science Information Partners (ESIP) Air Quality Workgroup. The main activities during the project that successfully advanced DataFed, enabled air quality applications and established community-oriented infrastructures were: develop access to distributed data (surface and satellite), build Web infrastructure to support data access, processing and analysis create tools for data processing and analysis foster air quality community collaboration and interoperability.

Interoperability challenges in river discharge modelling: A cross domain application scenario

NASA Astrophysics Data System (ADS)

Santoro, Mattia; Andres, Volker; Jirka, Simon; Koike, Toshio; Looser, Ulrich; Nativi, Stefano; Pappenberger, Florian; Schlummer, Manuela; Strauch, Adrian; Utech, Michael; Zsoter, Ervin

2018-06-01

River discharge is a critical water cycle variable, as it integrates all the processes (e.g. runoff and evapotranspiration) occurring within a river basin and provides a hydrological output variable that can be readily measured. Its prediction is of invaluable help for many water-related tasks including water resources assessment and management, flood protection, and disaster mitigation. Observations of river discharge are important to calibrate and validate hydrological or coupled land, atmosphere and ocean models. This requires using datasets from different scientific domains (Water, Weather, etc.). Typically, such datasets are provided using different technological solutions. This complicates the integration of new hydrological data sources into application systems. Therefore, a considerable effort is often spent on data access issues instead of the actual scientific question. This paper describes the work performed to address multidisciplinary interoperability challenges related to river discharge modeling and validation. This includes definition and standardization of domain specific interoperability standards for hydrological data sharing and their support in global frameworks such as the Global Earth Observation System of Systems (GEOSS). The research was developed in the context of the EU FP7-funded project GEOWOW (GEOSS Interoperability for Weather, Ocean and Water), which implemented a "River Discharge" application scenario. This scenario demonstrates the combination of river discharge observations data from the Global Runoff Data Centre (GRDC) database and model outputs produced by the European Centre for Medium-Range Weather Forecasts (ECMWF) predicting river discharge based on weather forecast information in the context of the GEOSS.

Extending the GI Brokering Suite to Support New Interoperability Specifications

NASA Astrophysics Data System (ADS)

Boldrini, E.; Papeschi, F.; Santoro, M.; Nativi, S.

2014-12-01

The GI brokering suite provides the discovery, access, and semantic Brokers (i.e. GI-cat, GI-axe, GI-sem) that empower a Brokering framework for multi-disciplinary and multi-organizational interoperability. GI suite has been successfully deployed in the framework of several programmes and initiatives, such as European Union funded projects, NSF BCube, and the intergovernmental coordinated effort Global Earth Observation System of Systems (GEOSS). Each GI suite Broker facilitates interoperability for a particular functionality (i.e. discovery, access, semantic extension) among a set of brokered resources published by autonomous providers (e.g. data repositories, web services, semantic assets) and a set of heterogeneous consumers (e.g. client applications, portals, apps). A wide set of data models, encoding formats, and service protocols are already supported by the GI suite, such as the ones defined by international standardizing organizations like OGC and ISO (e.g. WxS, CSW, SWE, GML, netCDF) and by Community specifications (e.g. THREDDS, OpenSearch, OPeNDAP, ESRI APIs). Using GI suite, resources published by a particular Community or organization through their specific technology (e.g. OPeNDAP/netCDF) can be transparently discovered, accessed, and used by different Communities utilizing their preferred tools (e.g. a GIS visualizing WMS layers). Since Information Technology is a moving target, new standards and technologies continuously emerge and are adopted in the Earth Science context too. Therefore, GI Brokering suite was conceived to be flexible and accommodate new interoperability protocols and data models. For example, GI suite has recently added support to well-used specifications, introduced to implement Linked data, Semantic Web and precise community needs. Amongst the others, they included: DCAT: a RDF vocabulary designed to facilitate interoperability between Web data catalogs. CKAN: a data management system for data distribution, particularly used by public administrations. CERIF: used by CRIS (Current Research Information System) instances. HYRAX Server: a scientific dataset publishing component. This presentation will discuss these and other latest GI suite extensions implemented to support new interoperability protocols in use by the Earth Science Communities.

The International Planetary Data Alliance (IPDA)

NASA Astrophysics Data System (ADS)

Stein, Thomas; Gopala Krishna, Barla; Crichton, Daniel J.

2016-07-01

The International Planetary Data Alliance (IPDA) is a close association of partners with the aim of improving the quality of planetary science data and services to the end users of space based instrumentation. The specific mission of the IPDA is to facilitate global access to, and exchange of, high quality scientific data products managed across international boundaries. Ensuring proper capture, accessibility and availability of the data is the task of the individual member space agencies. The IPDA is focused on developing an international standard that allows discovery, query, access, and usage of such data across international planetary data archive systems. While trends in other areas of space science are concentrating on the sharing of science data from diverse standards and collection methods, the IPDA concentrates on promoting governing data standards that drive common methods for collecting and describing planetary science data across the international community. This approach better supports the long term goal of easing data sharing across system and agency boundaries. An initial starting point for developing such a standard will be internationalization of NASA's Planetary Data System's (PDS) PDS4 standard. The IPDA was formed in 2006 with the purpose of adopting standards and developing collaborations across agencies to ensure data is captured in common formats. It has grown to a dozen member agencies represented by a number of different groups through the IPDA Steering Committee. Member agencies include: Armenian Astronomical Society, China National Space Agency (CNSA), European Space Agency (ESA), German Aerospace Center (DLR), Indian Space Research Organization (ISRO), Italian Space Agency (ASI), Japanese Aerospace Exploration Agency (JAXA), National Air and Space Administration (NASA), National Centre for Space Studies (CNES), Space Research Institute (IKI), UAE Space Agency, and UK Space Agency. The IPDA Steering Committee oversees the execution of projects and coordinates international collaboration. In executing its mission, the IPDA conducts a number of focused projects to enable interoperability, construction of compatible archives, and the operation of the IPDA as a whole. These projects have helped to establish the IPDA and to move the collaboration forward. A key project that is currently underway is the implementation of the PDS4 data standard. Given the international focus, it has been critical that the PDS and the IPDA collaborate on its development. Also, many other projects have been conducted successfully, including the IPDA Requirements Document, Data Dictionary Modelling, ESA Registry Integration, the Tools Registry, and several demonstrations of interoperability protocols applied to specific missions and data sets (PDS4/PDAP (Planetary Data Access Protocol), Venus Express Interoperability). The IPDA has grown significantly since its first meetings back in November 2006. The steering committee is composed today of 28 members from 24 countries or international organizations. In addition, a technical expert group composed of 20 members from participating countries provides supportive input on technical and compatibility issues. A number of IPDA projects are ongoing, including the creation of the Memorandum of Understanding (MOU) template for international missions; the investigation of IVOA/IPDA (International Virtual Observatory Alliance-IVOA) interaction; PDS4 implementation project; the development of international registries to enable registration and search of data, tools and services; and Chandrayaan-1 interoperability project with PDAP. In addition, the IPDA continues with outreach activities, being present or represented at national and international levels and at meetings such as COSPAR, AGU, EPSC, and EGU. Further information on IPDA activities, standards, and tools are available at the web page http://www.planetarydata.org. Tool and service developers are encouraged to register their products at the IPDA web site.

Tool and data interoperability in the SSE system

NASA Technical Reports Server (NTRS)

Shotton, Chuck

1988-01-01

Information is given in viewgraph form on tool and data interoperability in the Software Support Environment (SSE). Information is given on industry problems, SSE system interoperability issues, SSE solutions to tool and data interoperability, and attainment of heterogeneous tool/data interoperability.

Designing a Distributed Space Systems Simulation in Accordance with the Simulation Interoperability Standards Organization (SISO)

NASA Technical Reports Server (NTRS)

Cowen, Benjamin

2011-01-01

Simulations are essential for engineering design. These virtual realities provide characteristic data to scientists and engineers in order to understand the details and complications of the desired mission. A standard development simulation package known as Trick is used in developing a source code to model a component (federate in HLA terms). The runtime executive is integrated into an HLA based distributed simulation. TrickHLA is used to extend a Trick simulation for a federation execution, develop a source code for communication between federates, as well as foster data input and output. The project incorporates international cooperation along with team collaboration. Interactions among federates occur throughout the simulation, thereby relying on simulation interoperability. Communication through the semester went on between participants to figure out how to create this data exchange. The NASA intern team is designing a Lunar Rover federate and a Lunar Shuttle federate. The Lunar Rover federate supports transportation across the lunar surface and is essential for fostering interactions with other federates on the lunar surface (Lunar Shuttle, Lunar Base Supply Depot and Mobile ISRU Plant) as well as transporting materials to the desired locations. The Lunar Shuttle federate transports materials to and from lunar orbit. Materials that it takes to the supply depot include fuel and cargo necessary to continue moon-base operations. This project analyzes modeling and simulation technologies as well as simulation interoperability. Each team from participating universities will work on and engineer their own federate(s) to participate in the SISO Spring 2011 Workshop SIW Smackdown in Boston, Massachusetts. This paper will focus on the Lunar Rover federate.

Architectural approaches for HL7-based health information systems implementation.

PubMed

López, D M; Blobel, B

2010-01-01

Information systems integration is hard, especially when semantic and business process interoperability requirements need to be met. To succeed, a unified methodology, approaching different aspects of systems architecture such as business, information, computational, engineering and technology viewpoints, has to be considered. The paper contributes with an analysis and demonstration on how the HL7 standard set can support health information systems integration. Based on the Health Information Systems Development Framework (HIS-DF), common architectural models for HIS integration are analyzed. The framework is a standard-based, consistent, comprehensive, customizable, scalable methodology that supports the design of semantically interoperable health information systems and components. Three main architectural models for system integration are analyzed: the point to point interface, the messages server and the mediator models. Point to point interface and messages server models are completely supported by traditional HL7 version 2 and version 3 messaging. The HL7 v3 standard specification, combined with service-oriented, model-driven approaches provided by HIS-DF, makes the mediator model possible. The different integration scenarios are illustrated by describing a proof-of-concept implementation of an integrated public health surveillance system based on Enterprise Java Beans technology. Selecting the appropriate integration architecture is a fundamental issue of any software development project. HIS-DF provides a unique methodological approach guiding the development of healthcare integration projects. The mediator model - offered by the HIS-DF and supported in HL7 v3 artifacts - is the more promising one promoting the development of open, reusable, flexible, semantically interoperable, platform-independent, service-oriented and standard-based health information systems.

Tunable multimode-interference bandpass fiber filter.

PubMed

Antonio-Lopez, J E; Castillo-Guzman, A; May-Arrioja, D A; Selvas-Aguilar, R; Likamwa, P

2010-02-01

We report on a wavelength-tunable filter based on multimode interference (MMI) effects. A typical MMI filter consists of a multimode fiber (MMF) spliced between two single-mode fibers (SMF). The peak wavelength response of the filter exhibits a linear dependence when the length of the MMF is modified. Therefore a capillary tube filled with refractive-index-matching liquid is used to effectively increase the length of the MMF, and thus wavelength tuning is achieved. Using this filter a ring-based tunable erbium-doped fiber laser is demonstrated with a tunability of 30 nm, covering the full C-band.

Thyroid hypoechogenicity after methimazole withdrawal in Graves' disease: a useful index for predicting recurrence?

PubMed

Zingrillo, M; D'Aloiso, L; Ghiggi, M R; Di Cerbo, A; Chiodini, I; Torlontano, M; Liuzzi, A

1996-08-01

A characteristic thyroid ultrasonographic picture with diffuse or scattered low echogenicity has been described in Graves' disease (GD). Thyroid hypoechogenicity in GD at onset has been considered a prognostic index of relapse after medical treatment; moreover, thyroid hypoechogenicity is regularly observed in GD at the onset, but not in patients with 'burned-out' disease. The aim of this study was to evaluate the usefulness of thyroid hypoechogenicity changes in predicting GD relapse. Longitudinal prospective study of previously untreated patients with GD. Thirty-nine consecutive patients aged 10-72 years were treated with methimazole (MMI) for 12-24 months on a titration regimen. Evaluation of patients in remission or with relapse was done 12 and 24 months after MMI withdrawal. Thyroid ultrasonography and TSH receptor antibodies (TRAb) were evaluated in basal conditions and then one month after MMI withdrawal. Thyroid hypoechogenicity score (assessed by the same observer with the same equipment) was graded as: 0 absent; 1 mild; 2 moderate; 3 marked. At the withdrawal evaluation a score < 2 and a TRAb value < 10 U/l were considered as normal. Twelve and 24 months after withdrawal, there were 10 (25.6%) and 17 (44.7%) relapses, respectively. Neither thyroid hypoechogenicity score nor TRAb values evaluated in basal conditions, showed significant differences between patients remaining euthyroid and those who became again hyperthyroid. In the whole group, the thyroid hypoechogenicity score was significantly lower at the withdrawal than in basal conditions (1.1 +/- 1.1 vs 2 +/- 0.8; P < 0.0001); it was significantly lower in patients in remission (P < 0.001), but not in those who relapsed. The thyroid hypoechogenicity score at withdrawal was normal in 23/29 (79.3%) of patients still euthyroid and in 4/10 (40%) of those who relapsed up to the 12th month (P < 0.05); it was normal in 19/21 (90.4%) of patients still euthyroid and in 7/17 (41.2%) of those who relapsed up to the 24th month (P < 0.05). A normal thyroid hypoechogenicity score at withdrawal of MMI had a higher specificity (0.95) and sensitivity (0.59) with respect to TRAb values (0.86 and 0.53, respectively) for the prediction of the relapse of hyperthyroidism at the 24th month. Basal thyroid hypoechogenicity cannot be used as an index of relapse of GD. MMI treatment induces evident changes in thyroid hypoechogenicity, mainly in patients who subsequently go into remission. The absence or a low grade of thyroid hypoechogenicity after MMI treatment seems to be a favourable prognostic index of remission of hyperthyroidism in GD.

UHF (Ultra High Frequency) Military Satellite Communications Ground Equipment Interoperability.

DTIC Science & Technology

1986-10-06

crisis management requires interoperability between various services. These short-term crises often arise from unforeseen circumstances in which...Scheduler Qualcomm has prepared an interoperability study for the JTC3A (Reference 15) as a TA/CE for USCINCLANT ROC 5-84 requirements. It has defined a...interoperability is fundamental. A number of operational crises have occurred where interoperable communications or the lack of interoperable

HDOMO: Smart Sensor Integration for an Active and Independent Longevity of the Elderly.

PubMed

Frontoni, Emanuele; Pollini, Rama; Russo, Paola; Zingaretti, Primo; Cerri, Graziano

2017-11-13

The aim of this paper is to present the main results of HDOMO, an Ambient Assisted Living (AAL) project that involved 16 Small and Medium Enterprises (SMEs) and 2 research institutes. The objective of the project was to create an autonomous and automated domestic environment, primarily for elderly people and people with physical and motor disabilities. A known and familiar environment should help users in their daily activities and it should act as a virtual caregiver by calling, if necessary, relief efforts. Substantially, the aim of the project is to simplify the life of people in need of support, while keeping them autonomous in their private environment. From a technical point of view, the project provides the use of different Smart Objects (SOs), able to communicate among each other, in a cloud base infrastructure, and with the assisted users and their caregivers, in a perspective of interoperability and standardization of devices, usability and effectiveness of alarm systems. In the state of the art there are projects that achieve only a few of the elements listed. The HDOMO project aims to achieve all of them in one single project effectively. The experimental trials performed in a real scenario demonstrated the accuracy and efficiency of the system in extracting and processing data in real time to promptly acting, and in providing timely response to the needs of the user by integrating and confirming main alarms with different interoperable smart sensors. The article proposes a new technique to improve the accuracy of the system in detecting alarms using a multi-SO approach with information fusion between different devices, proving that this architecture can provide robust and reliable results on real environments.

HDOMO: Smart Sensor Integration for an Active and Independent Longevity of the Elderly

PubMed Central

2017-01-01

The aim of this paper is to present the main results of HDOMO, an Ambient Assisted Living (AAL) project that involved 16 Small and Medium Enterprises (SMEs) and 2 research institutes. The objective of the project was to create an autonomous and automated domestic environment, primarily for elderly people and people with physical and motor disabilities. A known and familiar environment should help users in their daily activities and it should act as a virtual caregiver by calling, if necessary, relief efforts. Substantially, the aim of the project is to simplify the life of people in need of support, while keeping them autonomous in their private environment. From a technical point of view, the project provides the use of different Smart Objects (SOs), able to communicate among each other, in a cloud base infrastructure, and with the assisted users and their caregivers, in a perspective of interoperability and standardization of devices, usability and effectiveness of alarm systems. In the state of the art there are projects that achieve only a few of the elements listed. The HDOMO project aims to achieve all of them in one single project effectively. The experimental trials performed in a real scenario demonstrated the accuracy and efficiency of the system in extracting and processing data in real time to promptly acting, and in providing timely response to the needs of the user by integrating and confirming main alarms with different interoperable smart sensors. The article proposes a new technique to improve the accuracy of the system in detecting alarms using a multi-SO approach with information fusion between different devices, proving that this architecture can provide robust and reliable results on real environments. PMID:29137174

Towards technical interoperability in telemedicine.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Craft, Richard Layne, II

2004-05-01

For telemedicine to realize the vision of anywhere, anytime access to care, the question of how to create a fully interoperable technical infrastructure must be addressed. After briefly discussing how 'technical interoperability' compares with other types of interoperability being addressed in the telemedicine community today, this paper describes reasons for pursuing technical interoperability, presents a proposed framework for realizing technical interoperability, identifies key issues that will need to be addressed if technical interoperability is to be achieved, and suggests a course of action that the telemedicine community might follow to accomplish this goal.

Integrated multi-sensor package (IMSP) for unmanned vehicle operations

NASA Astrophysics Data System (ADS)

Crow, Eddie C.; Reichard, Karl; Rogan, Chris; Callen, Jeff; Seifert, Elwood

2007-10-01

This paper describes recent efforts to develop integrated multi-sensor payloads for small robotic platforms for improved operator situational awareness and ultimately for greater robot autonomy. The focus is on enhancements to perception through integration of electro-optic, acoustic, and other sensors for navigation and inspection. The goals are to provide easier control and operation of the robot through fusion of multiple sensor outputs, to improve interoperability of the sensor payload package across multiple platforms through the use of open standards and architectures, and to reduce integration costs by embedded sensor data processing and fusion within the sensor payload package. The solutions investigated in this project to be discussed include: improved capture, processing and display of sensor data from multiple, non-commensurate sensors; an extensible architecture to support plug and play of integrated sensor packages; built-in health, power and system status monitoring using embedded diagnostics/prognostics; sensor payload integration into standard product forms for optimized size, weight and power; and the use of the open Joint Architecture for Unmanned Systems (JAUS)/ Society of Automotive Engineers (SAE) AS-4 interoperability standard. This project is in its first of three years. This paper will discuss the applicability of each of the solutions in terms of its projected impact to reducing operational time for the robot and teleoperator.

Advancement of the Artificial Pancreas through the Development of Interoperability Standards

PubMed Central

Picton, Peter E.; Yeung, Melanie; Hamming, Nathaniel; Desborough, Lane; Dassau, Eyal; Cafazzo, Joseph A.

2013-01-01

Despite advancements in the development of the artificial pancreas, barriers in the form of proprietary data and communication protocols of diabetes devices have made the integration of these components challenging. The Artificial Pancreas Standards and Technical Platform Project is an initiative funded by the JDRF Canadian Clinical Trial Network with the goal of developing device communication standards for the interoperability of diabetes devices. Stakeholders from academia, industry, regulatory agencies, and medical and patient communities have been engaged in advancing this effort. In this article, we describe this initiative along with the process involved in working with the standards organizations and stakeholders that are key to ensuring effective standards are developed and adopted. Discussion from a special session of the 12th Annual Diabetes Technology Meeting is also provided. PMID:23911190

Dealing with Diversity in Computational Cancer Modeling

PubMed Central

Johnson, David; McKeever, Steve; Stamatakos, Georgios; Dionysiou, Dimitra; Graf, Norbert; Sakkalis, Vangelis; Marias, Konstantinos; Wang, Zhihui; Deisboeck, Thomas S.

2013-01-01

This paper discusses the need for interconnecting computational cancer models from different sources and scales within clinically relevant scenarios to increase the accuracy of the models and speed up their clinical adaptation, validation, and eventual translation. We briefly review current interoperability efforts drawing upon our experiences with the development of in silico models for predictive oncology within a number of European Commission Virtual Physiological Human initiative projects on cancer. A clinically relevant scenario, addressing brain tumor modeling that illustrates the need for coupling models from different sources and levels of complexity, is described. General approaches to enabling interoperability using XML-based markup languages for biological modeling are reviewed, concluding with a discussion on efforts towards developing cancer-specific XML markup to couple multiple component models for predictive in silico oncology. PMID:23700360

National Geothermal Data System (USA): an Exemplar of Open Access to Data

NASA Astrophysics Data System (ADS)

Allison, M. Lee; Richard, Stephen; Blackman, Harold; Anderson, Arlene; Patten, Kim

2014-05-01

The National Geothermal Data System's (NGDS - www.geothermaldata.org) formal launch in April, 2014 will provide open access to millions of data records, sharing -relevant geoscience and longer term to land use data to propel geothermal development and production. NGDS serves information from all of the U.S. Department of Energy's sponsored development and research projects and geologic data from all 50 states, using free and open source software. This interactive online system is opening new exploration opportunities and potentially shortening project development by making data easily discoverable, accessible, and interoperable. We continue to populate our prototype functional data system with multiple data nodes and nationwide data online and available to the public. Data from state geological surveys and partners includes more than 6 million records online, including 1.72 million well headers (oil and gas, water, geothermal), 670,000 well logs, and 497,000 borehole temperatures and is growing rapidly. There are over 312 interoperable Web services and another 106 WMS (Web Map Services) registered in the system as of January, 2014. Companion projects run by Southern Methodist University and U.S. Geological Survey (USGS) are adding millions of additional data records. The DOE Geothermal Data Repository, currently hosted on OpenEI, is a system node and clearinghouse for data from hundreds of U.S. DOE-funded geothermal projects. NGDS is built on the US Geoscience Information Network (USGIN) data integration framework, which is a joint undertaking of the USGS and the Association of American State Geologists (AASG). NGDS complies with the White House Executive Order of May 2013, requiring all federal agencies to make their data holdings publicly accessible online in open source, interoperable formats with common core and extensible metadata. The National Geothermal Data System is being designed, built, deployed, and populated primarily with support from the US Department of Energy, Geothermal Technologies Office. To keep this system operational after the original implementation will require four core elements: continued serving of data and applications by providers; maintenance of system operations; a governance structure; and an effective business model. Each of these presents a number of challenges currently under consideration.

Orchestrating high-throughput genomic analysis with Bioconductor

PubMed Central

Huber, Wolfgang; Carey, Vincent J.; Gentleman, Robert; Anders, Simon; Carlson, Marc; Carvalho, Benilton S.; Bravo, Hector Corrada; Davis, Sean; Gatto, Laurent; Girke, Thomas; Gottardo, Raphael; Hahne, Florian; Hansen, Kasper D.; Irizarry, Rafael A.; Lawrence, Michael; Love, Michael I.; MacDonald, James; Obenchain, Valerie; Oleś, Andrzej K.; Pagès, Hervé; Reyes, Alejandro; Shannon, Paul; Smyth, Gordon K.; Tenenbaum, Dan; Waldron, Levi; Morgan, Martin

2015-01-01

Bioconductor is an open-source, open-development software project for the analysis and comprehension of high-throughput data in genomics and molecular biology. The project aims to enable interdisciplinary research, collaboration and rapid development of scientific software. Based on the statistical programming language R, Bioconductor comprises 934 interoperable packages contributed by a large, diverse community of scientists. Packages cover a range of bioinformatic and statistical applications. They undergo formal initial review and continuous automated testing. We present an overview for prospective users and contributors. PMID:25633503

Final Report for DOE Project: Portal Web Services: Support of DOE SciDAC Collaboratories

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mary Thomas, PI; Geoffrey Fox, Co-PI; Gannon, D

2007-10-01

Grid portals provide the scientific community with familiar and simplified interfaces to the Grid and Grid services, and it is important to deploy grid portals onto the SciDAC grids and collaboratories. The goal of this project is the research, development and deployment of interoperable portal and web services that can be used on SciDAC National Collaboratory grids. This project has four primary task areas: development of portal systems; management of data collections; DOE science application integration; and development of web and grid services in support of the above activities.

A SOA-Based Platform to Support Clinical Data Sharing

PubMed

Gazzarata, R; Giannini, B; Giacomini, M

2017-01-01

The eSource Data Interchange Group, part of the Clinical Data Interchange Standards Consortium, proposed five scenarios to guide stakeholders in the development of solutions for the capture of eSource data. The fifth scenario was subdivided into four tiers to adapt the functionality of electronic health records to support clinical research. In order to develop a system belonging to the “Interoperable” Tier, the authors decided to adopt the service-oriented architecture paradigm to support technical interoperability, Health Level Seven Version 3 messages combined with LOINC (Logical Observation Identifiers Names and Codes) vocabulary to ensure semantic interoperability, and Healthcare Services Specification Project standards to provide process interoperability. The developed architecture enhances the integration between patient-care practice and medical research, allowing clinical data sharing between two hospital information systems and four clinical data management systems/clinical registries. The core is formed by a set of standardized cloud services connected through standardized interfaces, involving client applications. The system was approved by a medical staff, since it reduces the workload for the management of clinical trials. Although this architecture can realize the “Interoperable” Tier, the current solution actually covers the “Connected” Tier, due to local hospital policy restrictions. © 2017 R. Gazzarata et al.

A SOA-Based Platform to Support Clinical Data Sharing

PubMed Central

Gazzarata, R.; Giannini, B.

2017-01-01

The eSource Data Interchange Group, part of the Clinical Data Interchange Standards Consortium, proposed five scenarios to guide stakeholders in the development of solutions for the capture of eSource data. The fifth scenario was subdivided into four tiers to adapt the functionality of electronic health records to support clinical research. In order to develop a system belonging to the “Interoperable” Tier, the authors decided to adopt the service-oriented architecture paradigm to support technical interoperability, Health Level Seven Version 3 messages combined with LOINC (Logical Observation Identifiers Names and Codes) vocabulary to ensure semantic interoperability, and Healthcare Services Specification Project standards to provide process interoperability. The developed architecture enhances the integration between patient-care practice and medical research, allowing clinical data sharing between two hospital information systems and four clinical data management systems/clinical registries. The core is formed by a set of standardized cloud services connected through standardized interfaces, involving client applications. The system was approved by a medical staff, since it reduces the workload for the management of clinical trials. Although this architecture can realize the “Interoperable” Tier, the current solution actually covers the “Connected” Tier, due to local hospital policy restrictions. PMID:29065576

SHIWA Services for Workflow Creation and Sharing in Hydrometeorolog

NASA Astrophysics Data System (ADS)

Terstyanszky, Gabor; Kiss, Tamas; Kacsuk, Peter; Sipos, Gergely

2014-05-01

Researchers want to run scientific experiments on Distributed Computing Infrastructures (DCI) to access large pools of resources and services. To run these experiments requires specific expertise that they may not have. Workflows can hide resources and services as a virtualisation layer providing a user interface that researchers can use. There are many scientific workflow systems but they are not interoperable. To learn a workflow system and create workflows may require significant efforts. Considering these efforts it is not reasonable to expect that researchers will learn new workflow systems if they want to run workflows developed in other workflow systems. To overcome it requires creating workflow interoperability solutions to allow workflow sharing. The FP7 'Sharing Interoperable Workflow for Large-Scale Scientific Simulation on Available DCIs' (SHIWA) project developed the Coarse-Grained Interoperability concept (CGI). It enables recycling and sharing workflows of different workflow systems and executing them on different DCIs. SHIWA developed the SHIWA Simulation Platform (SSP) to implement the CGI concept integrating three major components: the SHIWA Science Gateway, the workflow engines supported by the CGI concept and DCI resources where workflows are executed. The science gateway contains a portal, a submission service, a workflow repository and a proxy server to support the whole workflow life-cycle. The SHIWA Portal allows workflow creation, configuration, execution and monitoring through a Graphical User Interface using the WS-PGRADE workflow system as the host workflow system. The SHIWA Repository stores the formal description of workflows and workflow engines plus executables and data needed to execute them. It offers a wide-range of browse and search operations. To support non-native workflow execution the SHIWA Submission Service imports the workflow and workflow engine from the SHIWA Repository. This service either invokes locally or remotely pre-deployed workflow engines or submits workflow engines with the workflow to local or remote resources to execute workflows. The SHIWA Proxy Server manages certificates needed to execute the workflows on different DCIs. Currently SSP supports sharing of ASKALON, Galaxy, GWES, Kepler, LONI Pipeline, MOTEUR, Pegasus, P-GRADE, ProActive, Triana, Taverna and WS-PGRADE workflows. Further workflow systems can be added to the simulation platform as required by research communities. The FP7 'Building a European Research Community through Interoperable Workflows and Data' (ER-flow) project disseminates the achievements of the SHIWA project to build workflow user communities across Europe. ER-flow provides application supports to research communities within (Astrophysics, Computational Chemistry, Heliophysics and Life Sciences) and beyond (Hydrometeorology and Seismology) to develop, share and run workflows through the simulation platform. The simulation platform supports four usage scenarios: creating and publishing workflows in the repository, searching and selecting workflows in the repository, executing non-native workflows and creating and running meta-workflows. The presentation will outline the CGI concept, the SHIWA Simulation Platform, the ER-flow usage scenarios and how the Hydrometeorology research community runs simulations on SSP.

Application of Coalition Battle Management Language (C-BML) and C-BML Services to Live, Virtual, and Constructive (LVC) Simulation Environments

DTIC Science & Technology

2011-12-01

Task Based Approach to Planning.” Paper 08F- SIW -033. In Proceed- ings of the Fall Simulation Interoperability Workshop. Simulation Interoperability...Paper 06F- SIW -003. In Proceed- 2597 Blais ings of the Fall Simulation Interoperability Workshop. Simulation Interoperability Standards Organi...MSDL).” Paper 10S- SIW -003. In Proceedings of the Spring Simulation Interoperability Workshop. Simulation Interoperability Standards Organization

Maturity model for enterprise interoperability

NASA Astrophysics Data System (ADS)

Guédria, Wided; Naudet, Yannick; Chen, David

2015-01-01

Historically, progress occurs when entities communicate, share information and together create something that no one individually could do alone. Moving beyond people to machines and systems, interoperability is becoming a key factor of success in all domains. In particular, interoperability has become a challenge for enterprises, to exploit market opportunities, to meet their own objectives of cooperation or simply to survive in a growing competitive world where the networked enterprise is becoming a standard. Within this context, many research works have been conducted over the past few years and enterprise interoperability has become an important area of research, ensuring the competitiveness and growth of European enterprises. Among others, enterprises have to control their interoperability strategy and enhance their ability to interoperate. This is the purpose of the interoperability assessment. Assessing interoperability maturity allows a company to know its strengths and weaknesses in terms of interoperability with its current and potential partners, and to prioritise actions for improvement. The objective of this paper is to define a maturity model for enterprise interoperability that takes into account existing maturity models while extending the coverage of the interoperability domain. The assessment methodology is also presented. Both are demonstrated with a real case study.

Chiral spiral waveguides based on MMI crossings: theory and experiments

NASA Astrophysics Data System (ADS)

Cherchi, Matteo; Ylinen, Sami; Harjanne, Mikko; Kapulainen, Markku; Vehmas, Tapani; Aalto, Timo

2016-03-01

We introduce a novel type of chiral spiral waveguide where the usual waveguide crossings are replaced by 100:0 Multimode Interferometers (MMIs), i.e. 2x2 splitters that couple all the input light in the cross output port. Despite the topological equivalence with the standard configuration, we show how resorting to long MMIs has non-trivial advantages in terms of footprint and propagation length. An accurate analytic model is also introduced to show the impact of nonidealities on the spiral performances, including propagation loss and cross-talk. We have designed and fabricated three chiral spirals on our platform, based on 3 μm thick silicon strip waveguides with 0.13 dB/cm propagation loss, and 1.58 mm long MMIs. The fabricated spirals have 7, 13 and 49 loops respectively, corresponding to the effective lengths 6.6 cm, 12.5 cm and 47.9 cm. The proposed model is successfully applied to the experimental results, highlighting MMI extinction ratio of about 16.5 dB and MMI loss of about 0.08 dB, that are much worse compared to the simulated 50 dB extinction and 0.01 dB loss. This imposes an upper limit to the number of rounds, because light takes shortcuts through the bar MMI ports. Nevertheless, the novel chiral spiral waveguides outperform what is achievable in mainstream silicon photonics platforms based on submicron waveguides in terms of length and propagation losses, and they are promising candidates for the realization of integrated gyroscopes. They can be significantly further improved by replacing the MMIs with adiabatic 100:0 splitters, ensuring lower cross-talk and broader bandwidth.

The incidence of ophthalmopathy after radioiodine therapy for Graves` disease: Prognostic factors and the role of methimazole

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kung, A.W.C.; Cheng, A.

1994-08-01

Radioactive iodine-131 (RAI) has been reported to be associated with a high incidence of development or exacerbation of Graves` ophthalmopathy (GO). This is thought to be associated with a surge of autoantibodies after RAI therapy. The role of methimazole (MMI), which possesses immunomodulatory action, in the prevention of GO was explored by studying 114 patients with Graves` disease. They were assigned randomly to receive either RAI alone or adjunctive antithyroid drugs, which consisted of MMI and L-T{sub 4} as a block-replacement therapy for 12 months and were followed for 2 yr. Thirty-five patients (30.7%) had GO at presentation. Twenty-one (18%)more » patients developed new GO, and six had worsening of preexisting GO. The development of hypothyroidism (P < 0.01) and an elevation of TSH (P < 0.05) were associated with increased risk of development or exacerbation of GO. The chance of development or exacerbation of GO is higher in those with no ophthalmopathy than in those with preexisting GO at presentation (P = 0.002). The incidence of development or exacerbation of GO was similar in the two treatment groups (RAI, 22.8%; adjunctive antithyroid drugs, 23.7%; P = NS). MMI was able to suppress the surge of TSH receptor antibody (TRAB) after RAI, but a surge in TRAB was not of prognostic significance for the development of GO after RAI. Patients who developed or had exacerbation of GO actually had lower TRAB at presentation (P = 0.02). The authors conclude that hypothyroidism with elevated TSH is an important adverse factor for the development or exacerbation of GO, and MMI was unable to prevent the development or exacerbation of GO after RAI. 35 refs., 4 tabs.« less

Mentor-mentee interaction and laboratory social environment: Do they matter in doctoral students' publication productivity?

PubMed

Ynalvez, Marcus Antonius; Ynalvez, Ruby A; Ramírez, Enrique

2017-03-04

We explored the social shaping of science at the micro-level reality of face-to-face interaction in one of the traditional places for scientific activities-the scientific lab. We specifically examined how doctoral students' perception of their: (i) interaction with doctoral mentors (MMI) and (ii) lab social environment (LSE) influenced productivity. Construed as the production of peer-reviewed articles, we measured productivity using total number of articles (TOTAL), number of articles with impact factor greater than or equal to 4.00 (IFGE4), and number of first-authored articles (NFA). Via face-to-face interviews, we obtained data from n = 210 molecular biology Ph.D. students in selected universities in Japan, Singapore, and Taiwan. Additional productivity data (NFA) were obtained from online bibliometric databases. To summarize the original 13 MMI and 13 LSE semantic-differential items which we used to measure students' perceptions, principal component (PC) analyses were performed. The results were smaller sets of 4 MMI PCs and 4 LSE PCs. To identify which PCs influenced publication counts, we performed Poisson regression analyses. Although perceived MMI was not linked to productivity, perceived LSE was linked: Students who perceived their LSE as intellectually stimulating reported high levels of productivity in both TOTAL and IFGE4, but not in NFA. Our findings not only highlight how students' perception of their training environment factors in the production of scientific output, our findings also carry important implications for improving mentoring programs in science. © 2016 by The International Union of Biochemistry and Molecular Biology, 45(2):130-144, 2017. © 2016 The International Union of Biochemistry and Molecular Biology.

Considerations in comparing the U.S. Geological Survey one‐year induced‐seismicity hazard models with “Did You Feel It?” and instrumental data

USGS Publications Warehouse

White, Isabel; Liu, Taojun; Luco, Nicolas; Liel, Abbie

2017-01-01

The recent steep increase in seismicity rates in Oklahoma, southern Kansas, and other parts of the central United States led the U.S. Geological Survey (USGS) to develop, for the first time, a probabilistic seismic hazard forecast for one year (2016) that incorporates induced seismicity. In this study, we explore a process to ground‐truth the hazard model by comparing it with two databases of observations: modified Mercalli intensity (MMI) data from the “Did You Feel It?” (DYFI) system and peak ground acceleration (PGA) values from instrumental data. Because the 2016 hazard model was heavily based on earthquake catalogs from 2014 to 2015, this initial comparison utilized observations from these years. Annualized exceedance rates were calculated with the DYFI and instrumental data for direct comparison with the model. These comparisons required assessment of the options for converting hazard model results and instrumental data from PGA to MMI for comparison with the DYFI data. In addition, to account for known differences that affect the comparisons, the instrumental PGA and DYFI data were declustered, and the hazard model was adjusted for local site conditions. With these adjustments, examples at sites with the most data show reasonable agreement in the exceedance rates. However, the comparisons were complicated by the spatial and temporal completeness of the instrumental and DYFI observations. Furthermore, most of the DYFI responses are in the MMI II–IV range, whereas the hazard model is oriented toward forecasts at higher ground‐motion intensities, usually above about MMI IV. Nevertheless, the study demonstrates some of the issues that arise in making these comparisons, thereby informing future efforts to ground‐truth and improve hazard modeling for induced‐seismicity applications.

Characteristics of stroke mechanisms in patients with medullary infarction.

PubMed

Lee, M J; Park, Y G; Kim, S J; Lee, J J; Bang, O Y; Kim, J S

2012-11-01

Few studies have focused on the mechanisms underlying medullary infarctions. Our aim in this study was to investigate stroke mechanisms in patients with medullary infarctions and to determine the clinical, radiological and laboratory characteristics of these patients with different underlying stroke etiologies. Consecutive patients with medullary infarction were analysed. Stroke mechanisms were classified as large artery disease (LAD), cardiogenic embolism (CE), small vessel disease (SVD), arterial dissection or undetermined etiology. Clinical, radiological and laboratory factors were analysed according to the location of the lesion and stroke mechanisms. A total of 77 patients were enrolled in this study. Amongst them, 53 (68.8%) patients had lateral medullary infarction (LMI), 22 (28.6%) had medial medullary infarction (MMI), and the remaining 2 (2.6%) had hemimedullary infarction. In both LMI and MMI patients, LAD was the most frequently encountered stroke mechanism. Arterial dissection was the second most common cause followed by SVD and CE in patients with LMI, whereas SVD was more frequently observed (P < 0.001) and dissection and CE were less prevalent (P < 0.001 and P = 0.024, respectively) in MMI than in LMI. Regarding differences amongst stroke etiologies, patients with dissection were younger and had a significantly lower incidence of metabolic syndrome (P = 0.002 and P = 0.009, respectively) than patients with LAD and SVD. Patients in the LAD (19/34, 60%) and dissection groups (12/14, 75%) had abnormal perfusion-weighted MRI (PWI) findings, whereas all patients with SVD (9/9) had normal PWI findings (P < 0.001). Stroke mechanisms in medullary infarction differ between LMI and MMI. Clinical and radiological characteristics, especially PWI features, are helpful in discriminating the etiologies of stroke in these patients. © 2012 The Author(s) European Journal of Neurology © 2012 EFNS.

Development of a diatom-based multimetric index for acid mine drainage impacted depressional wetlands.

PubMed

Riato, Luisa; Leira, Manel; Della Bella, Valentina; Oberholster, Paul J

2018-01-15

Acid mine drainage (AMD) from coal mining in the Mpumalanga Highveld region of South Africa has caused severe chemical and biological degradation of aquatic habitats, specifically depressional wetlands, as mines use these wetlands for storage of AMD. Diatom-based multimetric indices (MMIs) to assess wetland condition have mostly been developed to assess agricultural and urban land use impacts. No diatom MMI of wetland condition has been developed to assess AMD impacts related to mining activities. Previous approaches to diatom-based MMI development in wetlands have not accounted for natural variability. Natural variability among depressional wetlands may influence the accuracy of MMIs. Epiphytic diatom MMIs sensitive to AMD were developed for a range of depressional wetland types to account for natural variation in biological metrics. For this, we classified wetland types based on diatom typologies. A range of 4-15 final metrics were selected from a pool of ~140 candidate metrics to develop the MMIs based on their: (1) broad range, (2) high separation power and (3) low correlation among metrics. Final metrics were selected from three categories: similarity to reference sites, functional groups, and taxonomic composition, which represent different aspects of diatom assemblage structure and function. MMI performances were evaluated according to their precision in distinguishing reference sites, responsiveness to discriminate reference and disturbed sites, sensitivity to human disturbances and relevancy to AMD-related stressors. Each MMI showed excellent discriminatory power, whether or not it accounted for natural variation. However, accounting for variation by grouping sites based on diatom typologies improved overall performance of MMIs. Our study highlights the usefulness of diatom-based metrics and provides a model for the biological assessment of depressional wetland condition in South Africa and elsewhere. Copyright © 2017 Elsevier B.V. All rights reserved.

Operator Variability in Scan Positioning is a Major Component of HR-pQCT Precision Error and is Reduced by Standardized Training

PubMed Central

Bonaretti, Serena; Vilayphiou, Nicolas; Chan, Caroline Mai; Yu, Andrew; Nishiyama, Kyle; Liu, Danmei; Boutroy, Stephanie; Ghasem-Zadeh, Ali; Boyd, Steven K.; Chapurlat, Roland; McKay, Heather; Shane, Elizabeth; Bouxsein, Mary L.; Black, Dennis M.; Majumdar, Sharmila; Orwoll, Eric S.; Lang, Thomas F.; Khosla, Sundeep; Burghardt, Andrew J.

2017-01-01

Introduction HR-pQCT is increasingly used to assess bone quality, fracture risk and anti-fracture interventions. The contribution of the operator has not been adequately accounted in measurement precision. Operators acquire a 2D projection (“scout view image”) and define the region to be scanned by positioning a “reference line” on a standard anatomical landmark. In this study, we (i) evaluated the contribution of positioning variability to in vivo measurement precision, (ii) measured intra- and inter-operator positioning variability, and (iii) tested if custom training software led to superior reproducibility in new operators compared to experienced operators. Methods To evaluate the operator in vivo measurement precision we compared precision errors calculated in 64 co-registered and non-co-registered scan-rescan images. To quantify operator variability, we developed software that simulates the positioning process of the scanner’s software. Eight experienced operators positioned reference lines on scout view images designed to test intra- and inter-operator reproducibility. Finally, we developed modules for training and evaluation of reference line positioning. We enrolled 6 new operators to participate in a common training, followed by the same reproducibility experiments performed by the experienced group. Results In vivo precision errors were up to three-fold greater (Tt.BMD and Ct.Th) when variability in scan positioning was included. Inter-operator precision errors were significantly greater than short-term intra-operator precision (p<0.001). New trained operators achieved comparable intra-operator reproducibility to experienced operators, and lower inter-operator reproducibility (p<0.001). Precision errors were significantly greater for the radius than for the tibia. Conclusion Operator reference line positioning contributes significantly to in vivo measurement precision and is significantly greater for multi-operator datasets. Inter-operator variability can be significantly reduced using a systematic training platform, now available online (http://webapps.radiology.ucsf.edu/refline/). PMID:27475931

Integrating Technologies, Methodologies, and Databases into a Comprehensive Terminology Management Environment to Support Interoperability among Clinical Information Systems

ERIC Educational Resources Information Center

Shakib, Shaun Cameron

2013-01-01

Controlled clinical terminologies are essential to realizing the benefits of electronic health record systems. However, implementing consistent and sustainable use of terminology has proven to be both intellectually and practically challenging. First, this project derives a conceptual understanding of the scope and intricacies of the challenge by…

Putting Interoperability to the Test: Building a Large Reusable Assessment Item Bank

ERIC Educational Resources Information Center

Sclater, Niall; MacDonald, Mary

2004-01-01

The COLA project has been developing a large bank of assessment items for units across the Scottish further education curriculum since May 2003. These will be made available to learners mainly via colleges' virtual learning environments (VLEs). Many people have been involved in the development of the COLA assessment item bank to ensure a high…

Delivery of QTIiv2 Question Types

ERIC Educational Resources Information Center

Wills, Gary B.; Davis, Hugh C.; Gilbert, Lester; Hare, Jonathon; Howard, Yvonne; Jeyes, Steve; Millard, David; Sherratt, Robert

2009-01-01

The IMS Question and Test Interoperability (QTI) standard identifies 16 different question types which may be used in online assessment. While some partial implementations exist, the R2Q2 project has developed a complete solution that renders and responds to all 16 question types as specified. In addition, care has been taken in the R2Q2 project…

OPSAID Initial Design and Testing Report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hurd, Steven A.; Stamp, Jason Edwin; Chavez, Adrian R.

2007-11-01

Process Control System (PCS) security is critical to our national security. Yet, there are a number of technological, economic, and educational impediments to PCS owners implementing effective security on their systems. OPSAID (Open PCS Security Architecture for Interoperable Design), a project sponsored by the US Department of Energy's Office of Electricity Delivery and Reliability, aims to address this issue through developing and testing an open source architecture for PCS security. Sandia National Laboratories, along with a team of PCS vendors and owners, have developed and tested this PCS security architecture. This report describes their progress to date.2 AcknowledgementsThe authors acknowledgemore » and thank their colleagues for their assistance with the OPSAID project.Sandia National Laboratories: Alex Berry, Charles Perine, Regis Cassidy, Bryan Richardson, Laurence PhillipsTeumim Technical, LLC: Dave TeumimIn addition, the authors are greatly indebted to the invaluable help of the members of the OPSAID Core Team. Their assistance has been critical to the success and industry acceptance of the OPSAID project.Schweitzer Engineering Laboratory: Rhett Smith, Ryan Bradetich, Dennis GammelTelTone: Ori Artman Entergy: Dave Norton, Leonard Chamberlin, Mark AllenThe authors would like to acknowledge that the work that produced the results presented in this paper was funded by the U.S. Department of Energy/Office of Electricity Delivery and Energy Reliability (DOE/OE) as part of the National SCADA Test Bed (NSTB) Program. Executive SummaryProcess control systems (PCS) are very important for critical infrastructure and manufacturing operations, yet cyber security technology in PCS is generally poor. The OPSAID (Open PCS (Process Control System) Security Architecture for Interoperable Design) program is intended to address these security shortcomings by accelerating the availability and deployment of comprehensive security technology for PCS, both for existing PCS and inherently secure PCS in the future. All activities are closely linked to industry outreach and advisory efforts.Generally speaking, the OPSAID project is focused on providing comprehensive security functionality to PCS that communicate using IP. This is done through creating an interoperable PCS security architecture and developing a reference implementation, which is tested extensively for performance and reliability.This report first provides background on the PCS security problem and OPSAID, followed by goals and objectives of the project. The report also includes an overview of the results, including the OPSAID architecture and testing activities, along with results from industry outreach activities. Conclusion and recommendation sections follow. Finally, a series of appendices provide more detailed information regarding architecture and testing activities.Summarizing the project results, the OPSAID architecture was defined, which includes modular security functionality and corresponding component modules. The reference implementation, which includes the collection of component modules, was tested extensively and proved to provide more than acceptable performance in a variety of test scenarios. The primary challenge in implementation and testing was correcting initial configuration errors.OPSAID industry outreach efforts were very successful. A small group of industry partners were extensively involved in both the design and testing of OPSAID. Conference presentations resulted in creating a larger group of potential industry partners.Based upon experience implementing and testing OPSAID, as well as through collecting industry feedback, the OPSAID project has done well and is well received. Recommendations for future work include further development of advanced functionality, refinement of interoperability guidance, additional laboratory and field testing, and industry outreach that includes PCS owner education. 4 5 --This page intentionally left blank --« less

Integrated-optic current sensors with a multimode interference waveguide device.

PubMed

Kim, Sung-Moon; Chu, Woo-Sung; Kim, Sang-Guk; Oh, Min-Cheol

2016-04-04

Optical current sensors based on polarization-rotated reflection interferometry are demonstrated using polymeric integrated optics and various functional optical waveguide devices. Interferometric sensors normally require bias feedback control for maintaining the operating point, which increases the cost. In order to resolve this constraint of feedback control, a multimode interference (MMI) waveguide device is integrated onto the current-sensor optical chip in this work. From the multiple outputs of the MMI, a 90° phase-shifted transfer function is obtained. Using passive quadrature demodulation, we demonstrate that the sensor could maintain the output signal regardless of the drift in the operating bias-point.

Spatial mode filters realized with multimode interference couplers

NASA Astrophysics Data System (ADS)

Leuthold, J.; Hess, R.; Eckner, J.; Besse, P. A.; Melchior, H.

1996-06-01

Spatial mode filters based on multimode interference couplers (MMI's) that offer the possibility of splitting off antisymmetric from symmetric modes are presented, and realizations of these filters in InGaAsP / InP are demonstrated. Measured suppression of the antisymmetric first-order modes at the output for the symmetric mode is better than 18 dB. Such MMI's are useful for monolithically integrating mode filters with all-optical devices, which are controlled through an antisymmetric first-order mode. The filtering out of optical control signals is necessary for cascading all-optical devices. Another application is the improvement of on-off ratios in optical switches.

The distribution of modified mercalli intensity in the 18 April 1906 San Francisco earthquake

USGS Publications Warehouse

Boatwright, J.; Bundock, H.

2008-01-01

We analyze Boatwright and Bundock's (2005) modified Mercalli intensity (MMI) map for the 18 April 1906 San Francisco earthquake, reviewing their interpretation of the MMI scale and testing their correlation of 1906 cemetery damage with MMI intensity. We consider in detail four areas of the intensity map where Boatwright and Bundock (2005) added significantly to the intensity descriptions compiled by Lawson (1908). We show that the distribution of off-fault damage in Sonoma County suggests that the rupture velocity approached the P-wave velocity along Tomales Bay. In contrast, the falloff of intensity with distance from the fault appears approximately constant throughout Mendocino County. The intensity in Humboldt County appears somewhat higher than the intensity in Mendocino County, suggesting that the rupture process at the northern end of the rupture was relatively energetic and that there was directivity consistent with a subsonic rupture velocity on the section of the fault south of Shelter Cove. Finally, we show that the intensity sites added in Santa Cruz County change the intensity distribution so that it decreases gradually along the southeastern section of rupture from Corralitos to San Juan Bautista and implies that the stress release on this section of rupture was relatively low.

All-optical universal logic gates on nonlinear multimode interference coupler using tunable input intensity

NASA Astrophysics Data System (ADS)

Tajaldini, Mehdi; Jafri, Mohd Zubir Mat

2015-04-01

The theory of Nonlinear Modal Propagation Analysis Method (NMPA) have shown significant features of nonlinear multimode interference (MMI) coupler with compact dimension and when launched near the threshold of nonlinearity. Moreover, NMPA have the potential to allow studying the nonlinear MMI based the modal interference to explorer the phenomenon that what happen due to the natural of multimode region. Proposal of all-optical switch based NMPA has approved its capability to achieving the all-optical gates. All-optical gates have attracted increasing attention due to their practical utility in all-optical signal processing networks and systems. Nonlinear multimode interference devices could apply as universal all-optical gates due to significant features that NMPA introduce them. In this Paper, we present a novel Ultra-compact MMI coupler based on NMPA method in low intensity compared to last reports either as a novel design method and potential application for optical NAND, NOR as universal gates on single structure for Boolean logic signal processing devices and optimize their application via studding the contrast ratio between ON and OFF as a function of output width. We have applied NMPA for several applications so that the miniaturization in low nonlinear intensities is their main purpose.

Effect of cloric acid concentration on corrosion behavior of Ni/Cr coated on carbon steel

NASA Astrophysics Data System (ADS)

Desiati, Resetiana Dwi; Sugiarti, Eni; Thosin, K. A. Zaini

2018-05-01

Corrosion is one of the causes of metal degradation. Carbon steel (Fe) is easy to corrode in the extreme environment. Coating on carbon steel is required to improve corrosion resistance owing to protection or hindrance to extreme environmental conditions. In this present work, carbon steel was coated by electroplating techniques for nickel and pack cementation for chrome. The corrosion rate test was performed by Weight Loss method on FeNiCr, FeNi, FeCr and uncoated Fe as comparator which was dyed in 37% HCl and 25% HCl which had previously been measured dimension and mass. The immersion test result of FeNiCr and FeNi specimen were better than FeCr and uncoated Fe in terms of increasing corrosion resistance. The corrosion rate for 56 hours in 37% HCl for FeNiCr was 1.592 mm/y and FeNi was 3.208 mm/y, FeCr only lasted within 32 hours with corrosion rate was 6.494 mm/y. Surface of the sample after the corrosion test there was pitting, crevice corrosion and alloy cracking caused by chloride. The higher the concentration of HCl the faster the corrosion rate.

Mayaro Virus Infection in Amazonia: A Multimodel Inference Approach to Risk Factor Assessment

PubMed Central

de Paula, Vanessa S.; Figueiredo, Luiz T. M.; Braga, Wornei S. M.; Luz, Sérgio L. B.

2012-01-01

Background Arboviral diseases are major global public health threats. Yet, our understanding of infection risk factors is, with a few exceptions, considerably limited. A crucial shortcoming is the widespread use of analytical methods generally not suited for observational data – particularly null hypothesis-testing (NHT) and step-wise regression (SWR). Using Mayaro virus (MAYV) as a case study, here we compare information theory-based multimodel inference (MMI) with conventional analyses for arboviral infection risk factor assessment. Methodology/Principal Findings A cross-sectional survey of anti-MAYV antibodies revealed 44% prevalence (n = 270 subjects) in a central Amazon rural settlement. NHT suggested that residents of village-like household clusters and those using closed toilet/latrines were at higher risk, while living in non-village-like areas, using bednets, and owning fowl, pigs or dogs were protective. The “minimum adequate” SWR model retained only residence area and bednet use. Using MMI, we identified relevant covariates, quantified their relative importance, and estimated effect-sizes (β±SE) on which to base inference. Residence area (β Village = 2.93±0.41; β Upland = −0.56±0.33, β Riverbanks = −2.37±0.55) and bednet use (β = −0.95±0.28) were the most important factors, followed by crop-plot ownership (β = 0.39±0.22) and regular use of a closed toilet/latrine (β = 0.19±0.13); domestic animals had insignificant protective effects and were relatively unimportant. The SWR model ranked fifth among the 128 models in the final MMI set. Conclusions/Significance Our analyses illustrate how MMI can enhance inference on infection risk factors when compared with NHT or SWR. MMI indicates that forest crop-plot workers are likely exposed to typical MAYV cycles maintained by diurnal, forest dwelling vectors; however, MAYV might also be circulating in nocturnal, domestic-peridomestic cycles in village-like areas. This suggests either a vector shift (synanthropic mosquitoes vectoring MAYV) or a habitat/habits shift (classical MAYV vectors adapting to densely populated landscapes and nocturnal biting); any such ecological/adaptive novelty could increase the likelihood of MAYV emergence in Amazonia. PMID:23071852

Lowering Entry Barriers for Multidisciplinary Cyber(e)-Infrastructures

NASA Astrophysics Data System (ADS)

Nativi, S.

2012-04-01

Multidisciplinarity is more and more important to study the Earth System and address Global Changes. To achieve that, multidisciplinary cyber(e)-infrastructures are an important instrument. In the last years, several European, US and international initiatives have been started to carry out multidisciplinary infrastructures, including: the Spatial Information in the European Community (INSPIRE), the Global Monitoring for Environment and Security (GMES), the Data Observation Network for Earth (DataOne), and the Global Earth Observation System of Systems (GEOSS). The majority of these initiatives are developing service-based digital infrastructures asking scientific Communities (i.e. disciplinary Users and data Producers) to implement a set of standards for information interoperability. For scientific Communities, this has represented an entry barrier which has proved to be high, in several cases. In fact, both data Producers and Users do not seem to be willing to invest precious resources to become expert on interoperability solutions -on the contrary, they are focused on developing disciplinary and thematic capacities. Therefore, an important research topic is lowering entry barriers for joining multidisciplinary cyber(e)-Infrastructures. This presentation will introduce a new approach to achieve multidisciplinary interoperability underpinning multidisciplinary infrastructures and lowering the present entry barriers for both Users and data Producers. This is called the Brokering approach: it extends the service-based paradigm by introducing a new a Brokering layer or cloud which is in charge of managing all the interoperability complexity (e.g. data discovery, access, and use) thus easing Users' and Producers' burden. This approach was successfully experimented in the framework of several European FP7 Projects and in GEOSS.

Interoperability after deployment: persistent challenges and regional strategies in Denmark.

PubMed

Kierkegaard, Patrick

2015-04-01

The European Union has identified Denmark as one of the countries who have the potential to provide leadership and inspiration for other countries in eHealth implementation and adoption. However, Denmark has historically struggled to facilitate data exchange between their public hospitals' electronic health records (EHRs). Furthermore, state-led projects failed to adequately address the challenges of interoperability after deployment. Changes in the organizational setup and division of responsibilities concerning the future of eHealth implementations in hospitals took place, which granted the Danish regions the full responsibility for all hospital systems, specifically the consolidation of EHRs to one system per region. The regions reduced the number of different EHRs to six systems by 2014. Additionally, the first version of the National Health Record was launched to provide health care practitioners with an overview of a patient's data stored in all EHRs across the regions and within the various health sectors. The governance of national eHealth implementation plays a crucial role in the development and diffusion of interoperable technologies. Changes in the organizational setup and redistribution of responsibilities between the Danish regions and the state play a pivotal role in producing viable and coherent solutions in a timely manner. Interoperability initiatives are best managed on a regional level or by the authorities responsible for the provision of local health care services. Cross-regional communication is essential during the initial phases of planning in order to set a common goal for countrywide harmonization, coherence and collaboration. © The Author 2015. Published by Oxford University Press in association with the International Society for Quality in Health Care; all rights reserved.

Current Efforts in European Projects to Facilitate the Sharing of Scientific Observation Data

NASA Astrophysics Data System (ADS)

Bredel, Henning; Rieke, Matthes; Maso, Joan; Jirka, Simon; Stasch, Christoph

2017-04-01

This presentation is intended to provide an overview of currently ongoing efforts in European projects to facilitate and promote the interoperable sharing of scientific observation data. This will be illustrated through two examples: a prototypical portal developed in the ConnectinGEO project for matching available (in-situ) data sources to the needs of users and a joint activity of several research projects to harmonise the usage of the OGC Sensor Web Enablement standards for providing access to marine observation data. ENEON is an activity initiated by the European ConnectinGEO project to coordinate in-situ Earth observation networks with the aim to harmonise the access to observations, improve discoverability, and identify/close gaps in European earth observation data resources. In this context, ENEON commons has been developed as a supporting Web portal for facilitating discovery, access, re-use and creation of knowledge about observations, networks, and related activities (e.g. projects). The portal is based on developments resulting from the European WaterInnEU project and has been extended to cover the requirements for handling knowledge about in-situ earth observation networks. A first prototype of the portal was completed in January 2017 which offers functionality for interactive discussion, information exchange and querying information about data delivered by different observation networks. Within this presentation, we will introduce the presented prototype and initiate a discussion about potential future work directions. The second example concerns the harmonisation of data exchange in the marine domain. There are many organisation who operate ocean observatories or data archives. In recent years, the application of the OGC Sensor Web Enablement (SWE) technology has become more and more popular to increase the interoperability between marine observation networks. However, as the SWE standards were intentionally designed in a domain independent manner, there are still a significant degrees of freedom how the same information could be handled in the SWE framework. Thus, further domain-specific agreements are necessary to describe more precisely, how SWE standards shall be applied in specific contexts. Within this presentation we will report the current status of the marine SWE profiles initiative which has the aim to develop guidance and recommendations for the application of SWE standards for ocean observation data. This initiative which is supported by projects such as NeXOS, FixO3, ODIP 2, BRIDGES and SeaDataCloud has already lead to first results, which will be introduced in the proposed presentation. In summary we will introduce two different building blocks how earth observation networks can be coordinated to ensure better discoverability through intelligent portal solutions and to ensure a common, interoperable exchange of the collected data through dedicated domain profiles of Sensor Web standard.

Easy research data handling with an OpenEarth DataLab for geo-monitoring research

NASA Astrophysics Data System (ADS)

Vanderfeesten, Maurice; van der Kuil, Annemiek; Prinčič, Alenka; den Heijer, Kees; Rombouts, Jeroen

2015-04-01

OpenEarth DataLab is an open source-based collaboration and processing platform to enable streamlined research data management from raw data ingest and transformation to interoperable distribution. It enables geo-scientists to easily synchronise, share, compute and visualise the dynamic and most up-to-date research data, scripts and models in multi-stakeholder geo-monitoring programs. This DataLab is developed by the Research Data Services team of TU Delft Library and 3TU.Datacentrum together with coastal engineers of Delft University of Technology and Deltares. Based on the OpenEarth software stack an environment has been developed to orchestrate numerous geo-related open source software components that can empower researchers and increase the overall research quality by managing research data; enabling automatic and interoperable data workflows between all the components with track & trace, hit & run data transformation processing in cloud infrastructure using MatLab and Python, synchronisation of data and scripts (SVN), and much more. Transformed interoperable data products (KML, NetCDF, PostGIS) can be used by ready-made OpenEarth tools for further analyses and visualisation, and can be distributed via interoperable channels such as THREDDS (OpenDAP) and GeoServer. An example of a successful application of OpenEarth DataLab is the Sand Motor, an innovative method for coastal protection in the Netherlands. The Sand Motor is a huge volume of sand that has been applied along the coast to be spread naturally by wind, waves and currents. Different research disciplines are involved concerned with: weather, waves and currents, sand distribution, water table and water quality, flora and fauna, recreation and management. Researchers share and transform their data in the OpenEarth DataLab, that makes it possible to combine their data and to see influence of different aspects of the coastal protection on their models. During the project the data are available only for the researchers involved. After the project a large part of the data and scripts will be published with DOI in the Data Archive of 3TU.Datacentrum for reuse in new research. For the 83 project members of the Sand Motor, the OpenEarth DataLab is available on www.zandmotordata.nl. The OpenEarth DataLab not only saves time and increases quality, but has the potential to open new frontiers for exploring cross-domain analysis and visualisations, revealing new scientific insights.

An assessment of NASA master directory/catalog interoperability for interdisciplinary study of the global water cycle

NASA Technical Reports Server (NTRS)

Peuquet, Donna J.

1991-01-01

The most important issue facing science is understanding global change; the causes, the processes involved and their consequences. The key to success in this massive Earth science research effort will depend on efficient identification and access to the most data available across the atmospheric, oceanographic, and land sciences. Current mechanisms used by earth scientists for accessing these data fall far short of meeting this need. Scientists must as a result frequently rely on a priori knowledge and informal person to person networks to find relevant data. The Master Directory/Catalog Interoperability Program (MC/CI) undertaken by NASA is an important step in overcoming these problems. The stated goal of the MD project is to enable researchers to efficiently identify, locate, and obtain access to space and Earth science data.

Solar-Terrestrial Ontology Development

NASA Astrophysics Data System (ADS)

McGuinness, D.; Fox, P.; Middleton, D.; Garcia, J.; Cinquni, L.; West, P.; Darnell, J. A.; Benedict, J.

2005-12-01

The development of an interdisciplinary virtual observatory (the Virtual Solar-Terrestrial Observatory; VSTO) as a scalable environment for searching, integrating, and analyzing databases distributed over the Internet requires a higher level of semantic interoperability than here-to-fore required by most (if not all) distributed data systems or discipline specific virtual observatories. The formalization of semantics using ontologies and their encodings for the internet (e.g. OWL - the Web Ontology Language), as well as the use of accompanying tools, such as reasoning, inference and explanation, open up both a substantial leap in options for interoperability and in the need for formal development principles to guide ontology development and use within modern, multi-tiered network data environments. In this presentation, we outline the formal methodologies we utilize in the VSTO project, the currently developed use-cases, ontologies and their relation to existing ontologies (such as SWEET).

Designing learning management system interoperability in semantic web

NASA Astrophysics Data System (ADS)

Anistyasari, Y.; Sarno, R.; Rochmawati, N.

2018-01-01

The extensive adoption of learning management system (LMS) has set the focus on the interoperability requirement. Interoperability is the ability of different computer systems, applications or services to communicate, share and exchange data, information, and knowledge in a precise, effective and consistent way. Semantic web technology and the use of ontologies are able to provide the required computational semantics and interoperability for the automation of tasks in LMS. The purpose of this study is to design learning management system interoperability in the semantic web which currently has not been investigated deeply. Moodle is utilized to design the interoperability. Several database tables of Moodle are enhanced and some features are added. The semantic web interoperability is provided by exploited ontology in content materials. The ontology is further utilized as a searching tool to match user’s queries and available courses. It is concluded that LMS interoperability in Semantic Web is possible to be performed.

Medical Device Plug-and-Play Interoperability Standards and Technology Leadership

DTIC Science & Technology

2017-10-01

Award Number: W81XWH-09-1-0705 TITLE: “Medical Device Plug-and-Play Interoperability Standards and Technology Leadership” PRINCIPAL INVESTIGATOR...Sept 2016 – 20 Sept 2017 4. TITLE AND SUBTITLE “Medical Device Plug-and-Play Interoperability 5a. CONTRACT NUMBER Standards and Technology ...efficiency through interoperable medical technologies . We played a leadership role on interoperability safety standards (AAMI, AAMI/UL Joint

Method for modeling social care processes for national information exchange.

PubMed

Miettinen, Aki; Mykkänen, Juha; Laaksonen, Maarit

2012-01-01

Finnish social services include 21 service commissions of social welfare including Adoption counselling, Income support, Child welfare, Services for immigrants and Substance abuse care. This paper describes the method used for process modeling in the National project for IT in Social Services in Finland (Tikesos). The process modeling in the project aimed to support common national target state processes from the perspective of national electronic archive, increased interoperability between systems and electronic client documents. The process steps and other aspects of the method are presented. The method was developed, used and refined during the three years of process modeling in the national project.

Latest developments for the IAGOS database: Interoperability and metadata

NASA Astrophysics Data System (ADS)

Boulanger, Damien; Gautron, Benoit; Thouret, Valérie; Schultz, Martin; van Velthoven, Peter; Broetz, Bjoern; Rauthe-Schöch, Armin; Brissebrat, Guillaume

2014-05-01

In-service Aircraft for a Global Observing System (IAGOS, http://www.iagos.org) aims at the provision of long-term, frequent, regular, accurate, and spatially resolved in situ observations of the atmospheric composition. IAGOS observation systems are deployed on a fleet of commercial aircraft. The IAGOS database is an essential part of the global atmospheric monitoring network. Data access is handled by open access policy based on the submission of research requests which are reviewed by the PIs. Users can access the data through the following web sites: http://www.iagos.fr or http://www.pole-ether.fr as the IAGOS database is part of the French atmospheric chemistry data centre ETHER (CNES and CNRS). The database is in continuous development and improvement. In the framework of the IGAS project (IAGOS for GMES/COPERNICUS Atmospheric Service), major achievements will be reached, such as metadata and format standardisation in order to interoperate with international portals and other databases, QA/QC procedures and traceability, CARIBIC (Civil Aircraft for the Regular Investigation of the Atmosphere Based on an Instrument Container) data integration within the central database, and the real-time data transmission. IGAS work package 2 aims at providing the IAGOS data to users in a standardized format including the necessary metadata and information on data processing, data quality and uncertainties. We are currently redefining and standardizing the IAGOS metadata for interoperable use within GMES/Copernicus. The metadata are compliant with the ISO 19115, INSPIRE and NetCDF-CF conventions. IAGOS data will be provided to users in NetCDF or NASA Ames format. We also are implementing interoperability between all the involved IAGOS data services, including the central IAGOS database, the former MOZAIC and CARIBIC databases, Aircraft Research DLR database and the Jülich WCS web application JOIN (Jülich OWS Interface) which combines model outputs with in situ data for intercomparison. The optimal data transfer protocol is being investigated to insure the interoperability. To facilitate satellite and model validation, tools will be made available for co-location and comparison with IAGOS. We will enhance the JOIN application in order to properly display aircraft data as vertical profiles and along individual flight tracks and to allow for graphical comparison to model results that are accessible through interoperable web services, such as the daily products from the GMES/Copernicus atmospheric service.

Applying Registry Services to Spaceflight Technologies to Aid in the Assignment of Assigned Numbers to Disparate Systems and Their Technologies to Further Enable Interoperability

NASA Technical Reports Server (NTRS)

Bradford, Robert N.; Nichols, Kelvin F.

2006-01-01

To date very little effort has been made to provide interoperability between various space agency projects. To effectively get to the Moon and beyond systems must interoperate. To provide interoperability, standardization and registries of various technologies will be required. These registries will be created as they relate to space flight. With the new NASA Moon/Mars initiative a requirement to standardize and control the naming conventions of very disparate systems and technologies are emerging. The need to provide numbering to the many processes, schemas, vehicles, robots, space suits and technologies (e.g. versions), to name a few, in the highly complex Constellation Initiative is imperative. The number of corporations, developer personnel, system interfaces, people interfaces will require standardization and registries on a scale not currently envisioned. It would only take one exception (stove piped system development) to weaken, if not, destroy interoperability. To start, a standardized registry process must be defined that allows many differing engineers, organizations and operators the ability to easily access disparate registry information across numerous technological and scientific disciplines. Once registries are standardized the need to provide registry support in terms of setup and operations, resolution of conflicts between registries and other issues will need to be addressed. Registries should not be confused with repositories. No end user data is "stored" in a registry nor is it a configuration control system. Once a registry standard is created and approved, the technologies that should be registered must be identified and prioritized. In this paper, we will identify and define a registry process that is compatible with the Constellation Initiative and other non related space activities and organizations. We will then identify and define the various technologies that should use a registry to provide interoperability. The first set of technologies will be those that are currently in need of expansion namely the assignment of satellite designations and the process which controls assignments. Second, we will analyze the technologies currently standardized under the Consultative Committee for Space Data Systems (CCSDS) banner. Third, we will analyze the current CCSDS working group and birds of a feather activities to ascertain registry requirements. Lastly, we will identify technologies that are either currently under the auspices of another

Trans-Pacific Astronomy Experiment Project Status

NASA Technical Reports Server (NTRS)

Hsu, Eddie

2000-01-01

The Trans-Pacific Astronomy Experiment is Phase 2 of the Trans-Pacific High Data Rate Satcom Experiments following the Trans-Pacific High Definition Video Experiment. It is a part of the Global Information Infrastructure-Global Interoperability for Broadband Networks Project (GII-GIBN). Provides global information infrastructure involving broadband satellites and terrestrial networks and access to information by anyone, anywhere, at any time. Collaboration of government, industry, and academic organizations demonstrate the use of broadband satellite links in a global information infrastructure with emphasis on astronomical observations, collaborative discussions and distance learning.

Reflections on Descriptive Psychology: NASA, Media and Technology, Observation

NASA Technical Reports Server (NTRS)

Aucoin, Paschal J., Jr.

1999-01-01

At NASA, we have used methods of Descriptive Psychology (DP) to solve problems in several areas: Simulation of proposed Lunar/Mars missions at high level to assess feasibility and needs in the robotics and automation areas. How we would go about making a "person-like" robot. Design and implementation of Systems Engineering practices on behalf of future projects with emphasis on interoperability. Design of a Question and Answer dialog system to handle student questions about Advanced Life Support (ALS) systems - students learn biology by applying it to ALS projects.

Maritime In Situ Sensing Inter-Operable Networks (MISSION)

DTIC Science & Technology

2013-09-30

creating acoustic communications (acomms) technologies enabling underwater sensor networks and distributed systems. Figure 1. Project MISSION...Marn, S. Ramp, F. Bahr, “Implementation of an Underwater Wireless Sensor Network in San Francisco Bay,” Proc. 10th International Mine Warfare...NILUS – An Underwater Acoustic Sensor Network Demonstrator System,” Proc. 10th International Mine Warfare Technology Symposium, Monterey, CA, May 7

The importance of using open source technologies and common standards for interoperability within eHealth: Perspectives from the Millennium Villages Project

PubMed Central

Borland, Rob; Barasa, Mourice; Iiams-Hauser, Casey; Velez, Olivia; Kaonga, Nadi Nina; Berg, Matt

2013-01-01

The purpose of this paper is to illustrate the importance of using open source technologies and common standards for interoperability when implementing eHealth systems and illustrate this through case studies, where possible. The sources used to inform this paper draw from the implementation and evaluation of the eHealth Program in the context of the Millennium Villages Project (MVP). As the eHealth Team was tasked to deploy an eHealth architecture, the Millennium Villages Global-Network (MVG-Net), across all fourteen of the MVP sites in Sub-Saharan Africa, the team recognized the need for standards and uniformity but also realized that context would be an important factor. Therefore, the team decided to utilize open source solutions. The MVP implementation of MVG-Net provides a model for those looking to implement informatics solutions across disciplines and countries. Furthermore, there are valuable lessons learned that the eHealth community can benefit from. By sharing lessons learned and developing an accessible, open-source eHealth platform, we believe that we can more efficiently and rapidly achieve the health-related and collaborative Millennium Development Goals (MDGs). PMID:22894051

Assessment of the impact of sea-level rise due to climate change on coastal groundwater discharge.

PubMed

Masciopinto, Costantino; Liso, Isabella Serena

2016-11-01

An assessment of sea intrusion into coastal aquifers as a consequence of local sea-level rise (LSLR) due to climate change was carried out at Murgia and Salento in southern Italy. The interpolation of sea-level measurements at three tide-gauge stations was performed during the period of 2000 to 2014. The best fit of measurements shows an increasing rate of LSLR ranging from 4.4mm/y to 8.8mm/y, which will result in a maximum LSLR of approximately 2m during the 22nd century. The local rate of sea-level rise matches recent 21st and 22nd century projections of mean global sea-level rise determined by other researchers, which include increased melting rates of the Greenland and Antarctic ice sheets, the effect of ocean thermal expansion, the melting of glaciers and ice caps, and changes in the quantity of stored land water. Subsequently, Ghyben-Herzberg's equation for the freshwater/saltwater interface was rewritten in order to determine the decrease in groundwater discharge due to the maximum LSLR. Groundwater flow simulations and ArcGIS elaborations of digital elevation models of the coast provided input data for the Ghyben-Herzberg calculation under the assumption of head-controlled systems. The progression of seawater intrusion due to LSLR suggests an impressive depletion of available groundwater discharge during the 22nd century, perhaps as much as 16.1% of current groundwater pumping for potable water in Salento. Copyright © 2016 Elsevier B.V. All rights reserved.

The Osseus platform: a prototype for advanced web-based distributed simulation

NASA Astrophysics Data System (ADS)

Franceschini, Derrick; Riecken, Mark

2016-05-01

Recent technological advances in web-based distributed computing and database technology have made possible a deeper and more transparent integration of some modeling and simulation applications. Despite these advances towards true integration of capabilities, disparate systems, architectures, and protocols will remain in the inventory for some time to come. These disparities present interoperability challenges for distributed modeling and simulation whether the application is training, experimentation, or analysis. Traditional approaches call for building gateways to bridge between disparate protocols and retaining interoperability specialists. Challenges in reconciling data models also persist. These challenges and their traditional mitigation approaches directly contribute to higher costs, schedule delays, and frustration for the end users. Osseus is a prototype software platform originally funded as a research project by the Defense Modeling & Simulation Coordination Office (DMSCO) to examine interoperability alternatives using modern, web-based technology and taking inspiration from the commercial sector. Osseus provides tools and services for nonexpert users to connect simulations, targeting the time and skillset needed to successfully connect disparate systems. The Osseus platform presents a web services interface to allow simulation applications to exchange data using modern techniques efficiently over Local or Wide Area Networks. Further, it provides Service Oriented Architecture capabilities such that finer granularity components such as individual models can contribute to simulation with minimal effort.

Designing for Change: Interoperability in a scaling and adapting environment

NASA Astrophysics Data System (ADS)

Yarmey, L.

2015-12-01

The Earth Science cyberinfrastructure landscape is constantly changing. Technologies advance and technical implementations are refined or replaced. Data types, volumes, packaging, and use cases evolve. Scientific requirements emerge and mature. Standards shift while systems scale and adapt. In this complex and dynamic environment, interoperability remains a critical component of successful cyberinfrastructure. Through the resource- and priority-driven iterations on systems, interfaces, and content, questions fundamental to stable and useful Earth Science cyberinfrastructure arise. For instance, how are sociotechnical changes planned, tracked, and communicated? How should operational stability balance against 'new and shiny'? How can ongoing maintenance and mitigation of technical debt be managed in an often short-term resource environment? The Arctic Data Explorer is a metadata brokering application developed to enable discovery of international, interdisciplinary Arctic data across distributed repositories. Completely dependent on interoperable third party systems, the Arctic Data Explorer publicly launched in 2013 with an original 3000+ data records from four Arctic repositories. Since then the search has scaled to 25,000+ data records from thirteen repositories at the time of writing. In the final months of original project funding, priorities shift to lean operations with a strategic eye on the future. Here we present lessons learned from four years of Arctic Data Explorer design, development, communication, and maintenance work along with remaining questions and potential directions.

Micro ring cavity resonator incorporating total internal reflection mirrors

NASA Astrophysics Data System (ADS)

Kim, Doo Gun; Choi, Woon Kyung; Choi, Young Wan; Yi, Jong Chang; Chung, Youngchul; Dagli, Nadir

2007-02-01

We investigate the properties of a multimode-interference (MMI) coupled micro ring cavity resonator with total-internal-reflection (TIR) mirrors and a semiconductor optical amplifier (SOA). The TIR mirrors were fabricated by the self-aligned process with a loss of 0.7 dB per mirror. The length and width of an MMI are 142 μm and 10 μm, respectively. The resulting free spectral range (FSR) of the resonator was approximately 1.698 nm near 1571 nm and the extinction ratio was about 17 dB. These devices might be useful as optical switching and add-drop filters in a photonic integrated circuit or as small and fast resonator devices.

Design optimization of integrated BiDi triplexer optical filter based on planar lightwave circuit.

PubMed

Xu, Chenglin; Hong, Xiaobin; Huang, Wei-Ping

2006-05-29

Design optimization of a novel integrated bi-directional (BiDi) triplexer filter based on planar lightwave circuit (PLC) for fiber-to-the premise (FTTP) applications is described. A multi-mode interference (MMI) device is used to filter the up-stream 1310nm signal from the down-stream 1490nm and 1555nm signals. An array waveguide grating (AWG) device performs the dense WDM function by further separating the two down-stream signals. The MMI and AWG are built on the same substrate with monolithic integration. The design is validated by simulation, which shows excellent performance in terms of filter spectral characteristics (e.g., bandwidth, cross-talk, etc.) as well as insertion loss.

Design optimization of integrated BiDi triplexer optical filter based on planar lightwave circuit

NASA Astrophysics Data System (ADS)

Xu, Chenglin; Hong, Xiaobin; Huang, Wei-Ping

2006-05-01

Design optimization of a novel integrated bi-directional (BiDi) triplexer filter based on planar lightwave circuit (PLC) for fiber-to-the premise (FTTP) applications is described. A multi-mode interference (MMI) device is used to filter the up-stream 1310nm signal from the down-stream 1490nm and 1555nm signals. An array waveguide grating (AWG) device performs the dense WDM function by further separating the two down-stream signals. The MMI and AWG are built on the same substrate with monolithic integration. The design is validated by simulation, which shows excellent performance in terms of filter spectral characteristics (e.g., bandwidth, cross-talk, etc.) as well as insertion loss.

Synthesis of Hadamard transformers by use of multimode interference optical waveguides.

PubMed

Gupta, Atma Ram; Tsutsumi, Kiyoshi; Nakayama, Junichi

2003-05-20

We propose a synthesis method of optical Hadamard transformer using multimode interference (MMI) couplers. By using the signal transfer matrix of 2 x 2, 4 x 4, and 8 x 8 MMI couplers, we show that sum and difference units of input signals can be synthesized. An interchange unit of two signals can also be synthesized. One synthesis method of Hadamard transformers is a combination of only 2 x 2 units, and the other is a combination of N x N(N > or = 4) units as well as 2 x 2 units. The design examples of operation units are shown, and the size and the output power of Hadamard transformers are estimated.

Microgrid and Inverter Control and Simulator Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

2012-09-13

A collection of software that can simulate the operation of an inverter on a microgrid or control a real inverter. In addition, it can simulate the control of multiple nodes on a microgrid." Application: Simulation of inverters and microgrids; control of inverters on microgrids." The MMI submodule is designed to control custom inverter hardware, and to simulate that hardware. The INVERTER submodule is only the simulator code, and is of an earlier generation than the simulator in MMI. The MICROGRID submodule is an agent-based simulator of multiple nodes on a microgrid which presents a web interface. The WIND submodule producesmore » movies of wind data with a web interface.« less

Medical treatment of hyperthyroidism: state of the art.

PubMed

Fumarola, A; Di Fiore, A; Dainelli, M; Grani, G; Calvanese, A

2010-11-01

Methimazole (MMI) and propylthiouracil (PTU) are the main antithyroid drugs used for hyperthyroidism. They inhibit the synthesis of thyroid hormone at various levels and are used as the primary treatment for hyperthyroidism or as a preparation before radioiodine therapy or thyroidectomy. MMI is the drug of choice because of its widespread availability, longer half-life and small number of severe side effects. Drugs of second choice are potassium perchlorate, beta blockers, iodine, lithium carbonate and glucocorticoids. Rituximab, a monoclonal antibody directed against human CD20, was recently proposed as a biological therapy for cases of Graves' disease unresponsive to traditional drugs. © J. A. Barth Verlag in Georg Thieme Verlag KG Stuttgart · New York.

Transient polyuria related to central diabetes insipidus caused by lymphocytic infundibulo-neurohypophysitis in a patient treated for Graves' disease.

PubMed

Yamazaki, Masanori; Sato, Ai; Nishio, Shin-ichi; Uehara, Takeshi; Komatsu, Mitsuhisa

2010-01-01

A 45-year-old man was hospitalized because of weight loss, finger tremor, thirst, polydipsia and increased urinary frequency. He was diagnosed with Graves' disease (GD) and central diabetes insipidus (CDI). Magnetic resonance imaging revealed the enlarged posterior pituitary with thickened stalk. Histological examination obtained from biopsy of the pituitary revealed lymphocytic infundibulo-neurohypophysitis. He received treatment with thiamazole (MMI) for GD and desmopressin acetate (DDAVP) for CDI. However, DDAVP administration could be discontinued as GD was gradually improved. This course indicates that not only the recovered renal response to arginine-vasopressin but also the immunomodulative effects of MMI might attribute to the improvement of polyuria.

Supply Chain Interoperability Measurement

DTIC Science & Technology

2015-06-19

Supply Chain Interoperability Measurement DISSERTATION June 2015 Christos E. Chalyvidis, Major, Hellenic Air...ENS-DS-15-J-001 SUPPLY CHAIN INTEROPERABILITY MEASUREMENT DISSERTATION Presented to the Faculty Department of Operational Sciences...INTEROPERABILITY MEASUREMENT Christos E. Chalyvidis, BS, MSc. Major, Hellenic Air Force Committee Membership: Dr. A.W. Johnson Chair

Interoperability and information discovery

USGS Publications Warehouse

Christian, E.

2001-01-01

In the context of information systems, there is interoperability when the distinctions between separate information systems are not a barrier to accomplishing a task that spans those systems. Interoperability so defined implies that there are commonalities among the systems involved and that one can exploit such commonalities to achieve interoperability. The challenge of a particular interoperability task is to identify relevant commonalities among the systems involved and to devise mechanisms that exploit those commonalities. The present paper focuses on the particular interoperability task of information discovery. The Global Information Locator Service (GILS) is described as a policy, standards, and technology framework for addressing interoperable information discovery on a global and long-term basis. While there are many mechanisms for people to discover and use all manner of data and information resources, GILS initiatives exploit certain key commonalities that seem to be sufficient to realize useful information discovery interoperability at a global, long-term scale. This paper describes ten of the specific commonalities that are key to GILS initiatives. It presents some of the practical implications for organizations in various roles: content provider, system engineer, intermediary, and searcher. The paper also provides examples of interoperable information discovery as deployed using GILS in four types of information communities: bibliographic, geographic, environmental, and government.

80 FR 46010 - Promoting Semantic Interoperability of Laboratory Data; Public Workshop; Request for Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2015-08-03

...] Promoting Semantic Interoperability of Laboratory Data; Public Workshop; Request for Comments AGENCY: Food... workshop entitled ``FDA/CDC/NLM Workshop on Promoting Semantic Interoperability of Laboratory Data.'' The... to promoting the semantic interoperability of laboratory data between in vitro diagnostic devices and...

The value of personal health record (PHR) systems.

PubMed

Kaelber, David; Pan, Eric C

2008-11-06

Personal health records (PHRs) are a rapidly growing area of health information technology despite a lack of significant value-based assessment.Here we present an assessment of the potential value of PHR systems, looking at both costs and benefits.We examine provider-tethered, payer-tethered, and third-party PHRs, as well as idealized interoperable PHRs. An analytical model was developed that considered eight PHR application and infrastructure functions. Our analysis projects the initial and annual costs and annual benefits of PHRs to the entire US over the next 10 years.This PHR analysis shows that all forms of PHRs have initial net negative value. However, at the end of 10 years, steady state annual net value ranging from$13 billion to -$29 billion. Interoperable PHRs provide the most value, followed by third-party PHRs and payer-tethered PHRs also showing positive net value. Provider-tethered PHRs constantly demonstrating negative net value.

Bridging data models and terminologies to support adverse drug event reporting using EHR data.

PubMed

Declerck, G; Hussain, S; Daniel, C; Yuksel, M; Laleci, G B; Twagirumukiza, M; Jaulent, M-C

2015-01-01

This article is part of the Focus Theme of METHODs of Information in Medicine on "Managing Interoperability and Complexity in Health Systems". SALUS project aims at building an interoperability platform and a dedicated toolkit to enable secondary use of electronic health records (EHR) data for post marketing drug surveillance. An important component of this toolkit is a drug-related adverse events (AE) reporting system designed to facilitate and accelerate the reporting process using automatic prepopulation mechanisms. To demonstrate SALUS approach for establishing syntactic and semantic interoperability for AE reporting. Standard (e.g. HL7 CDA-CCD) and proprietary EHR data models are mapped to the E2B(R2) data model via SALUS Common Information Model. Terminology mapping and terminology reasoning services are designed to ensure the automatic conversion of source EHR terminologies (e.g. ICD-9-CM, ICD-10, LOINC or SNOMED-CT) to the target terminology MedDRA which is expected in AE reporting forms. A validated set of terminology mappings is used to ensure the reliability of the reasoning mechanisms. The percentage of data elements of a standard E2B report that can be completed automatically has been estimated for two pilot sites. In the best scenario (i.e. the available fields in the EHR have actually been filled), only 36% (pilot site 1) and 38% (pilot site 2) of E2B data elements remain to be filled manually. In addition, most of these data elements shall not be filled in each report. SALUS platform's interoperability solutions enable partial automation of the AE reporting process, which could contribute to improve current spontaneous reporting practices and reduce under-reporting, which is currently one major obstacle in the process of acquisition of pharmacovigilance data.

75 FR 63462 - Smart Grid Interoperability Standards; Notice of Docket Designation for Smart Grid...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-15

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. RM11-2-000] Smart Grid Interoperability Standards; Notice of Docket Designation for Smart Grid Interoperability Standards October 7, 2010... directs the development of a framework to achieve interoperability of smart grid devices and systems...

81 FR 68435 - Workshop on Promoting Semantic Interoperability of Laboratory Data; Public Workshop; Request for...

Federal Register 2010, 2011, 2012, 2013, 2014

2016-10-04

...] Workshop on Promoting Semantic Interoperability of Laboratory Data; Public Workshop; Request for Comments... Semantic Interoperability of Laboratory Data.'' The purpose of this public workshop is to receive and... Semantic Interoperability of Laboratory Data.'' Received comments will be placed in the docket and, except...

Interoperability Barriers in NASA Earth Science Data Systems from the Perspective of a Science User (Invited)

NASA Astrophysics Data System (ADS)

Kuo, K.

2010-12-01

As a practitioner in the field of atmospheric remote sensing, the author, like many other similar science users, depends on and uses heavily NASA Earth Science remote sensing data. Thus the author is asked by the NASA Earth Science Data Information System Project (ESDIS) to assess the capabilities of the Earth Observing System Data and Information System (EOSDIS) in order to provide suggestions and recommendations for the evolution of EOSDIS in the path towards its 2015 Vision Tenets. As NASA's Earth science data system, EOSDIS provides data processing and data archiving and distribution services for EOS missions. The science operations of EOSDIS are the focus of this report, i.e. data archiving and distribution, which are performed within a distributed system of many interconnected nodes, namely the Science Investigator-led Processing Systems, or SIPS, and distributed data centers. Since its inception in the early 1990s, EOSDIS has represented a democratization of data, a break from the past when data dissemination was at the discretion of project scientists. Its “open data” policy is so highly valued and well received by its user communities that it has influenced other agencies, even those of other countries, to adopt the same open policy. In the last ~10 years EOSDIS has matured to serve very well users of any given science community in which the varieties of data being used change infrequently. The unpleasant effects of interoperability barriers are now more often felt by users who try to use new data outside their existing familiar set. This paper first defines interoperability and identifies the purposes for achieving interoperability. The sources of interoperability barriers, classified by the author into software, hardware, and human categories, are examined. For a subset of issues related to software, it presents diagnoses obtained from experience of the author and his survey of the EOSDIS data finding, ordering, retrieving, and extraction services. it also reports on an analysis of his survey regarding tools provided by EOSDIS or its user communities and intended to make routine data manipulations easier. Barriers in the hardware category are those resulting from differences in orbit configurations of the spacecrafts and differences in remote sensing modality (active or passive), spectral and spatial resolutions, scanning strategies, etc. of the instruments. Such differences are best understood by considering the nature of remotely sensed observations. Human factors are further classified into institutional and individual subcategories. The former includes factors such as NASA’s funding practices and the latter relates to individuals’ propensity in adopting new technologies. Finally, a strategy for overcoming these barriers is proposed.

Advanced ASON prototyping research activities in China

NASA Astrophysics Data System (ADS)

Hu, WeiSheng; Jin, Yaohui; Guo, Wei; Su, Yikai; He, Hao; Sun, Weiqiang

2005-02-01

This paper provides an overview of prototyping research activities of automatically switched optical networks and transport networks (ASONs/ASTNs) in China. In recent years, China has recognized the importance and benefits of the emerging ASON/ASTN techniques. During the period of 2001 and 2002, the national 863 Program of China started the preliminary ASON research projects with the main objectives to build preliminary ASON testbeds, develop control plane protocols and test their performance in the testbeds. During the period of 2003 and 2004, the 863 program started ASTN prototyping equipment projects for more practical applications. Totally 12 ASTN equipments are being developed by three groups led by Chinese venders: ZTE with Beijing University of Posts and Telecommunications (BUPT), Wuhan Research Institute of Posts and Telecommunication (WRI) with Shanghai Jiao Tong University (SJTU), and Huawei Inc. Meanwhile, as the ASTN is maturing, some of the China"s carries are participating in the OIF"s World Interoperability Demonstration, carrying out ASTN test, or deploying ASTN backbone networks. Finally, several ASTN backbone networks being tested or deployed now will be operated by the carries in 2005. The 863 Program will carry out an ASTN field trail in Yangtse River Delta, and finally deploy the 3TNET. 3TNET stands for Tbps transmission, Tbps switching, and Tbps routing, as well as a network integrating the above techniques. A task force under the "863" program is responsible for ASTN equipment specifications and interoperation agreements, technical coordination among all the participants, schedule of the whole project during the project undergoing, and organization of internetworking of all the equipments in the laboratories and field trials.

Early return to work in workers' compensation patients after arthroscopic full-thickness rotator cuff repair.

PubMed

Bhatia, Sanjeev; Piasecki, Dana P; Nho, Shane Jay; Romeo, Anthony A; Cole, Brian J; Nicholson, Gregory P; Boniquit, Nicole; Verma, Nikhil N

2010-08-01

The purpose of this study was to investigate the ability of patients to return to their preoperative work level and to identify functional prognostic factors in a group of Workers' Compensation (WC) patients after arthroscopic repair of full-thickness rotator cuff tears at a minimum follow-up of 1 year. Seventy-eight consecutive WC patients underwent arthroscopic rotator cuff repair (ARCR) and were retrospectively reviewed. Potential predictors of occupational outcomes were recorded. The primary outcomes included work level at the time of discharge, time to maximum medical improvement (MMI), and failures requiring revision rotator cuff repair. Secondary outcomes including physical examination and subjective scoring scales were also recorded. Overall, 88.5% of patients (n = 69) returned to their preoperative level of work at a mean time to MMI of 7.6 +/- 2.6 months. Of the WC patients, 55 (70.5%) were followed up for purposes of assessing shoulder function, with a mean follow-up of 33.6 +/- 13.9 months. The mean American Shoulder and Elbow Surgeons score at this time was 82.3 +/- 20.9, and the mean score on a visual analog scale was 1.7 +/- 2.3. An association was found between patients who underwent ARCR with open biceps tenodesis and delay in MMI (P = .01). WC patients undergoing ARCR may expect a high likelihood of return to full duty at a mean time to MMI of 7.6 months. At the time of follow-up, patients reported good outcomes using validated scoring scales, but subjective outcomes remained inferior to non-WC patients based on historical controls. Alcohol use was the only prognostic factor to show a significant association with return to restricted-duty employment and repair failure. Level IV, therapeutic case series. 2010 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Anti-glutamic acid decarboxylase antibody in Graves' disease is a possible indicator for the unlikelihood of going into remission with antithyroid agents.

PubMed

Yoshihara, Ai; Isozaki, Osamu; Okubo, Yumiko; Takano, Kazue

2009-01-01

The prevalence and titer of glutamic acid decarboxylase antibody (GADAb) in type 1 diabetes mellitus (T1DM) has been reported to be higher in patients with autoimmune thyroid diseases (AITD) than those without them. However, we have no data about the influence of GADAb on AITD. We therefore studied the clinical characteristics of Graves' disease (GD) with GADAb in order to clarify the influence of GADAb on GD. Twelve GD patients with GADAb were enrolled and were compared to 40 GD patients without DM. The male to female ratio and age of onset of GD showed no statistical difference. The titer of TSH receptor antibody (TRAb) at the onset of GD was similar in both groups. Initial treatment with methimazole (MMI) was started in all patients with GADAb but radioactive iodine (RI) therapy was carried out in five patients because of adverse effects of MMI or poor control of hyperthyroidism. The initial titer of TRAb was significantly lower in patients treated with MMI alone compared to that in RI treated patients but none of the patients treated with MMI alone went into remission after more than 3-years of follow up. We also compared these GADAb-positive patients with 14 patients with diabetes mellitus who had matched clinical features. The number of diabetic patients who remained in possible remission was significantly higher than that of GADAb-positive patients (5 in 14 vs 0 in 12). Moreover, the rate of remission in the diabetic patients was no different from that of 21 control patients without diabetes followed for more than 7 years (5 in 14 vs 7 in 21). These data suggested that GADAb-positive patients are unlikely to go into remission with antithyroid agents. Therefore, definitive therapies might be preferable for the initial treatment of GADAb-positive patients.

Antithyroid Drugs and Congenital Malformations: A Nationwide Korean Cohort Study.

PubMed

Seo, Gi Hyeon; Kim, Tae Hyuk; Chung, Jae Hoon

2018-03-20

Untreated or insufficiently treated Graves disease in pregnancy may pose risks to both mother and fetus. Antithyroid drugs (ATDs) are the treatment mainstay, but the potential teratogenic effect of these drugs has prompted clinicians to question the safe management of this vulnerable population. To examine the association between maternal prescriptions for ATDs and congenital malformations in live births. Nationwide cohort study. Korean National Health Insurance database. A cohort of 2 886 970 completed pregnancies linked to live-born infants in 2 210 253 women between 2008 and 2014. Maternal prescriptions for ATDs in the first trimester. The risk for overall and organ-specific congenital malformations in offspring, with logistic regression models used to control for potential confounders. 12 891 pregnancies (0.45%) were exposed to ATDs during the first trimester. The prevalence of malformations in exposed offspring was 7.27%, compared with 5.94% in offspring of women who were not prescribed ATDs during pregnancy (P < 0.001) (adjusted odds ratio, 1.19 [95% CI, 1.12 to 1.28]). Absolute increases in the prevalence of congenital malformations per 1000 live births were 8.81 cases (CI, 3.92 to 13.70 cases) for propylthiouracil alone, 17.05 cases (CI, 1.94 to 32.15 cases) for methimazole (MMI) alone, and 16.53 cases (CI, 4.73 to 28.32 cases) for propylthiouracil and MMI, compared with pregnancies without ATD prescriptions. In the MMI group, a high cumulative dose (>495 mg) during the first trimester was associated with an increased risk for malformations compared with a low dose (1 to 126 mg) (adjusted odds ratio, 1.87 [CI, 1.06 to 3.30]). The study used a prescription claims database to assess ATD exposure. Exposure to ATDs during the first trimester was associated with increased risk for congenital malformations, particularly for pregnancies in which women received prescriptions for MMI or both ATDs. None.

Mechanical Structural Design of a MEMS-Based Piezoresistive Accelerometer for Head Injuries Monitoring: A Computational Analysis by Increments of the Sensor Mass Moment of Inertia †

PubMed Central

Messina, Marco; Njuguna, James; Palas, Chrysovalantis

2018-01-01

This work focuses on the proof-mass mechanical structural design improvement of a tri-axial piezoresistive accelerometer specifically designed for head injuries monitoring where medium-G impacts are common; for example, in sports such as racing cars or American Football. The device requires the highest sensitivity achievable with a single proof-mass approach, and a very low error (<1%) as the accuracy for these types of applications is paramount. The optimization method differs from previous work as it is based on the progressive increment of the sensor proof-mass mass moment of inertia (MMI) in all three axes. Three different designs are presented in this study, where at each step of design evolution, the MMI of the sensor proof-mass gradually increases in all axes. The work numerically demonstrates that an increment of MMI determines an increment of device sensitivity with a simultaneous reduction of cross-axis sensitivity in the particular axis under study. This is due to the linkage between the external applied stress and the distribution of mass (of the proof-mass), and therefore of its mass moment of inertia. Progressively concentrating the mass on the axes where the piezoresistors are located (i.e., x- and y-axis) by increasing the MMI in the x- and y-axis, will undoubtedly increase the longitudinal stresses applied in that areas for a given external acceleration, therefore increasing the piezoresistors fractional resistance change and eventually positively affecting the sensor sensitivity. The final device shows a sensitivity increase of about 80% in the z-axis and a reduction of cross-axis sensitivity of 18% respect to state-of-art sensors available in the literature from a previous work of the authors. Sensor design, modelling, and optimization are presented, concluding the work with results, discussion, and conclusion. PMID:29351221

SARCOSPA - Sarcopenia in spondyloarthritis patients.

PubMed

Aguiar, R; Sequeira, J; Meirinhos, T; Ambrósio, C; Barcelos, A

2014-01-01

The loss of muscle mass (MM) is a serious problem which has been demonstrated in patients with rheumatoid arthritis. There are few studies about the loss of MM in patients with spondyloarthritis (Spa). To assess muscle mass index (MMI) in a cohort of patients with Spa and compare it with a control group of healthy individuals; to verify if a higher risk of sarcopenia is related with disease activity, functional impairment, duration of the illness and radiological damage. Case control study. Muscle mass index (MMI) was determined, from the value of MM, using Lee's equation, in a cohort of patients with spondyloarthritis and in a control group. Bath Ankylosing Spondylitis Disease Activity and Function Indexes (BASDAI and BASFI), Ankylosing Spondylitis Quality of Life (ASQoL) and Modified Stoke Ankylosing Spondylitis Spinal Score (mSASSS) were assessed in a cohort of patients with axial Spa, as well as Health Assessment Questionnaire (HAQ) and Disease Activity Score 28 (DAS28) in patients with peripheral disease. Data were treated using SPSS version 17.0. Values of p<0,05 were considered with statistical significance. 60 patients were enrolled; 48.2% were males, mean age 45.5±13.4 years, mean disease duration 10.9±11.6 years; 36 had ankylosing spondylitis and 24 had psoriatic arthritis. 62% of patients had sarcopenia and there was a significant difference in mean MMI between patients and controls (7.65±0.98 vs 8.25±0.92; p=0.001, OR =5.23. In male patients, there was a statistically significant moderate negative correlation between MMI and BASDAI and BASFI (p=-0.536 and p=-0.445). No other significant correlations were identified. Our study supports the hypothesis of a greater prevalence of sarcopenia in patients with Spa compared to healthy controls. Some limitations included the sample size, potential confounding factor such the bias of measurement and the use of a non-validated equation to Portuguese population to calculate MM.

Modelling and approaching pragmatic interoperability of distributed geoscience data

NASA Astrophysics Data System (ADS)

Ma, Xiaogang

2010-05-01

Interoperability of geodata, which is essential for sharing information and discovering insights within a cyberinfrastructure, is receiving increasing attention. A key requirement of interoperability in the context of geodata sharing is that data provided by local sources can be accessed, decoded, understood and appropriately used by external users. Various researchers have discussed that there are four levels in data interoperability issues: system, syntax, schematics and semantics, which respectively relate to the platform, encoding, structure and meaning of geodata. Ontology-driven approaches have been significantly studied addressing schematic and semantic interoperability issues of geodata in the last decade. There are different types, e.g. top-level ontologies, domain ontologies and application ontologies and display forms, e.g. glossaries, thesauri, conceptual schemas and logical theories. Many geodata providers are maintaining their identified local application ontologies in order to drive standardization in local databases. However, semantic heterogeneities often exist between these local ontologies, even though they are derived from equivalent disciplines. In contrast, common ontologies are being studied in different geoscience disciplines (e.g., NAMD, SWEET, etc.) as a standardization procedure to coordinate diverse local ontologies. Semantic mediation, e.g. mapping between local ontologies, or mapping local ontologies to common ontologies, has been studied as an effective way of achieving semantic interoperability between local ontologies thus reconciling semantic heterogeneities in multi-source geodata. Nevertheless, confusion still exists in the research field of semantic interoperability. One problem is caused by eliminating elements of local pragmatic contexts in semantic mediation. Comparing to the context-independent feature of a common domain ontology, local application ontologies are closely related to elements (e.g., people, time, location, intention, procedure, consequence, etc.) of local pragmatic contexts and thus context-dependent. Elimination of these elements will inevitably lead to information loss in semantic mediation between local ontologies. Correspondingly, understanding and effect of exchanged data in a new context may differ from that in its original context. Another problem is the dilemma on how to find a balance between flexibility and standardization of local ontologies, because ontologies are not fixed, but continuously evolving. It is commonly realized that we cannot use a unified ontology to replace all local ontologies because they are context-dependent and need flexibility. However, without coordination of standards, freely developed local ontologies and databases will bring enormous work of mediation between them. Finding a balance between standardization and flexibility for evolving ontologies, in a practical sense, requires negotiations (i.e. conversations, agreements and collaborations) between different local pragmatic contexts. The purpose of this work is to set up a computer-friendly model representing local pragmatic contexts (i.e. geodata sources), and propose a practical semantic negotiation procedure for approaching pragmatic interoperability between local pragmatic contexts. Information agents, objective facts and subjective dimensions are reviewed as elements of a conceptual model for representing pragmatic contexts. The author uses them to draw a practical semantic negotiation procedure approaching pragmatic interoperability of distributed geodata. The proposed conceptual model and semantic negotiation procedure were encoded with Description Logic, and then applied to analyze and manipulate semantic negotiations between different local ontologies within the National Mineral Resources Assessment (NMRA) project of China, which involves multi-source and multi-subject geodata sharing.

Building a Community Infrastructure for Scalable On-Line Performance Analysis Tools around Open|Speedshop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, Barton

2014-06-30

Peta-scale computing environments pose significant challenges for both system and application developers and addressing them required more than simply scaling up existing tera-scale solutions. Performance analysis tools play an important role in gaining this understanding, but previous monolithic tools with fixed feature sets have not sufficed. Instead, this project worked on the design, implementation, and evaluation of a general, flexible tool infrastructure supporting the construction of performance tools as “pipelines” of high-quality tool building blocks. These tool building blocks provide common performance tool functionality, and are designed for scalability, lightweight data acquisition and analysis, and interoperability. For this project, wemore » built on Open|SpeedShop, a modular and extensible open source performance analysis tool set. The design and implementation of such a general and reusable infrastructure targeted for petascale systems required us to address several challenging research issues. All components needed to be designed for scale, a task made more difficult by the need to provide general modules. The infrastructure needed to support online data aggregation to cope with the large amounts of performance and debugging data. We needed to be able to map any combination of tool components to each target architecture. And we needed to design interoperable tool APIs and workflows that were concrete enough to support the required functionality, yet provide the necessary flexibility to address a wide range of tools. A major result of this project is the ability to use this scalable infrastructure to quickly create tools that match with a machine architecture and a performance problem that needs to be understood. Another benefit is the ability for application engineers to use the highly scalable, interoperable version of Open|SpeedShop, which are reassembled from the tool building blocks into a flexible, multi-user interface set of tools. This set of tools targeted at Office of Science Leadership Class computer systems and selected Office of Science application codes. We describe the contributions made by the team at the University of Wisconsin. The project built on the efforts in Open|SpeedShop funded by DOE/NNSA and the DOE/NNSA Tri-Lab community, extended Open|Speedshop to the Office of Science Leadership Class Computing Facilities, and addressed new challenges found on these cutting edge systems. Work done under this project at Wisconsin can be divided into two categories, new algorithms and techniques for debugging, and foundation infrastructure work on our Dyninst binary analysis and instrumentation toolkits and MRNet scalability infrastructure.« less

ISAIA: Interoperable Systems for Archival Information Access

NASA Technical Reports Server (NTRS)

Hanisch, Robert J.

2002-01-01

The ISAIA project was originally proposed in 1999 as a successor to the informal AstroBrowse project. AstroBrowse, which provided a data location service for astronomical archives and catalogs, was a first step toward data system integration and interoperability. The goals of ISAIA were ambitious: '...To develop an interdisciplinary data location and integration service for space science. Building upon existing data services and communications protocols, this service will allow users to transparently query hundreds or thousands of WWW-based resources (catalogs, data, computational resources, bibliographic references, etc.) from a single interface. The service will collect responses from various resources and integrate them in a seamless fashion for display and manipulation by the user.' Funding was approved only for a one-year pilot study, a decision that in retrospect was wise given the rapid changes in information technology in the past few years and the emergence of the Virtual Observatory initiatives in the US and worldwide. Indeed, the ISAIA pilot study was influential in shaping the science goals, system design, metadata standards, and technology choices for the virtual observatory. The ISAIA pilot project also helped to cement working relationships among the NASA data centers, US ground-based observatories, and international data centers. The ISAIA project was formed as a collaborative effort between thirteen institutions that provided data to astronomers, space physicists, and planetary scientists. Among the fruits we ultimately hoped would come from this project would be a central site on the Web that any space scientist could use to efficiently locate existing data relevant to a particular scientific question. Furthermore, we hoped that the needed technology would be general enough to allow smaller, more-focused community within space science could use the same technologies and standards to provide more specialized services. A major challenge to searching for data across a broad community is that information that describe some data products are either not relevant to other data or not applicable in the same way. Some previous metadata standard development efforts (e.g., in the earth science and library communities) have produced standards that are very large and difficult to support. To address this problem, we studied how a standard may be divided into separable pieces. Data providers that wish to participate in interoperable searches can support only those parts of the standard that are relevant to them. We prototyped a top-level metadata standard that was small and applicable to all space science data.

The Role of Standards in Cloud-Computing Interoperability

DTIC Science & Technology

2012-10-01

services are not shared outside the organization. CloudStack, Eucalyptus, HP, Microsoft, OpenStack , Ubuntu, and VMWare provide tools for building...center requirements • Developing usage models for cloud ven- dors • Independent IT consortium OpenStack http://www.openstack.org • Open-source...software for running private clouds • Currently consists of three core software projects: OpenStack Compute (Nova), OpenStack Object Storage (Swift

Exploring the Lack of Interoperability of Databases within Department of Homeland Security Interagency Environment Concerning Maritime Port Security

DTIC Science & Technology

2009-03-01

37 Figure 8 New Information Sharing Model from United States Intelligence Community Information Sharing...PRIDE while the Coast Guard has MISSLE and the newly constructed WATCHKEEPER. All these databases contain intelligence on incoming vessels...decisions making. Experts rely heavily on future projections as hallmarks of skilled performance." (Endsley et al. 2006) The SA model above

OTF CCSDS Mission Operations Prototype. Directory and Action Service. Phase I: Exit Presentation

NASA Technical Reports Server (NTRS)

Reynolds, Walter F.; Lucord, Steven A.; Stevens, John E.

2009-01-01

This slide presentation describes the phase I directory and action service prototype for the CCSDS system. The project goals are to: (1) Demonstrate the use of Mission Operations standards to implement Directory and Action Services (2) Investigate Mission Operations language neutrality (3) Investigate C3I XML interoperability concepts (4) Integrate applicable open source technologies in a Service Oriented Architecture

Optofluidic devices for biomolecule sensing and multiplexing

NASA Astrophysics Data System (ADS)

Ozcelik, Damla

Optofluidics which integrates photonics and microfluidics, has led to highly compact, sensitive and adaptable biomedical sensors. Optofluidic biosensors based on liquid-core anti-resonant reflecting optical waveguides (LC-ARROWs), have proven to be a highly sensitive, portable, and reconfigurable platform for fluorescence spectroscopy and detection of single biomolecules such as proteins, nucleic acids, and virus particles. However, continued improvements in sensitivity remain a major goal as we approach the ultimate limit of detecting individual bio-particles labeled by single or few fluorophores. Additionally, the ability to simultaneously detect and identify multiple biological particles or biomarkers is one of the key requirements for molecular diagnostic tests. The compactness and adaptability of these platforms can further be advanced by introducing tunability, integrating off-chip components, designing reconfigurable and customizable devices, which makes these platforms very good candidates for many different applications. The goal of this thesis was to introduce new elements in these LC-ARROW optofluidics platforms that provide major enhancements in their functionality, making them more sensitive, compact, customizable and multiplexed. First, a novel integrated tunable spectral filter that achieves effective elimination of background noise on the ARROW platform was demonstrated. A unique dual liquid-core design enabled the independent multi-wavelength tuning of the spectral filter by adjusting the refractive index and chemical properties of the liquid. In order to enhance the detection sensitivity of the platform, Y-splitter waveguides were integrated to create multiple excitation spots for each target molecule. A powerful signal processing algorithm was used to analyze the data to improve the signal-to-noise ratio (SNR) of the collected data. Next, the design, optimization and characterization of the Y-splitter waveguides are presented; and single influenza virus detection with an improved SNR was demonstrated using this platform. Finally, multiplexing capacity is introduced to the ARROW detection platform by integrating multi-mode interference (MMI) waveguides. MMI waveguides create wavelength dependent multiple excitation spots at the excitation region, allowing the spectral multiplexed detection of multiple different target molecules based on the excitation pattern, without the need for additional spectral filters. Successful spectral multiplexed detection of three different types of influenza viruses is achieved by using separate wavelengths and combination of wavelengths. This multiplexing capacity is further enhanced by taking advantage of the spatial properties of the MMI pattern, designing triple liquid-core waveguides that intersect the MMI waveguide in different locations. Furthermore, the spectral and spatial multiplexing capacities are combined in these triple liquid-core MMI platforms, allowing these devices to distinguish multiple different targets and samples simultaneously.

Slow Long-Term Erosion Rates of Banks Peninsula, New Zealand

NASA Astrophysics Data System (ADS)

Dudunake, T.; Nichols, K. K.; Pugsley, E.; Nelson, S.; Colton, J.

2017-12-01

Banks Peninsula, located south of Christchurch, New Zealand, is composed of a multi-aged complex of volcanic centers. The oldest, Lyttelton Volcano is 12 to 10 Ma, and 350 km3. The largest volcano, Akaroa Volcano, is 9 to 8 Ma and 1200 km3. Both of these volcanoes have large embayments (Lyttelton Harbour and Akaroa Harbour) that connect the central volcano (the location of the former volcanic summits) to the ocean. The other eruptive centers, Mt. Herbert ( 9.5 to 8 Ma) and Diamond Harbor (7 to 5.8 Ma), have not eroded to sea level. We used inferred original surfaces and present day topography to calculate the volume of rock eroded from river valleys draining the flanks of Lyttelton (n=11) and Akaroa (n=26) volcanoes and from the large embayments that penetrate the eroding Lyttelton (n=8) and Akaroa (n=25) volcanoes. We used the youngest age of the eruptions as the start of erosion (Lyttelton = 10 Ma and Akaroa = 8 Ma) to determine erosion rates. Preliminary data suggest average erosion rates of 8.2 ± 2.4 m/My (averaged over 10 Ma) on the flanks of Lyttelton Volcano and 12 ± 5.1 m/My (averaged over 8 Ma) on the flanks of Akaroa Volcano. Dating control and formation processes of Lyttelton Harbour and Akaroa Harbour are poorly constrained. The youngest lava flows, Diamond Harbor, are 5.7 Ma and flow into the Lyttelton Harbour embayment. Using endmembers of embayment age for Lyttelton Harbour (10 Ma to 5.7 Ma) the erosion rates range between 18 ± 5.8 m/My and 31 ± 10 m/My. Similarly, the hillslopes of Akaroa Harbour have slow erosion rates (based on endmember ages of 8 Ma and 5.7 Ma) and range between 22 ± 18 and 31 ± 25 m/My. Even the fastest erosion rates on Banks Peninsula are an order of magnitude slower than the erosion rates of other basalt volcanoes in the world's oceans. Using a similar methodology, Tahiti is eroding between 1200 and 2700 m/Ma (Hildenbrand et al., 2008). Other erosion rates, based on sediment yields and water chemistry for La Reunion (400 to 3000 m/Ma; Louvat and Allegre, 1997), Guadeloupe (400 to 1700 m/Ma; Ricci et al., 2014), and Martinique (800 m/Ma; Germa et al., 2010) are also significantly faster than erosion rates of Banks Peninsula.

Brokerage services for Earth Science data: the EuroGEOSS legacy (Invited)

NASA Astrophysics Data System (ADS)

Nativi, S.; Craglia, M.; Pearlman, J.

2013-12-01

Global sustainability research requires an integrated multidisciplinary effort underpinned by a collaborative environment discovering and accessing heterogeneous data across disciplines. Traditionally, interoperability has been achieved by implementing federation of systems. The federating approach entails the adoption of a set of common technologies and standards. This presentation argues that for complex (and uncontrolled) environments (such as global, multidisciplinary, and voluntary-based infrastructures) federated solutions must be completed and enhanced by a brokering approach -making available a set of brokerage services. In fact, brokerage services allows a cyber-infrastructure to lower entry barriers (for both data producers and users) and to better address the different domain specificities. The brokering interoperability approach was successfully experimented by the EuroGEOSS project, funded by the European Commission in the FP7 framework (see http://www.eurogeoss.eu). The EuroGEOSS Brokering framework provided the EuroGEOSS Capacity with multidisciplinary interoperability functionalities. This platform was developed applying several of the principles/requirements that characterize the System of Systems (SoS) approach and the Internet of Services (IoS) philosophy. The framework consists of three main brokers (middleware components implementing intermediation and harmonization services): a basic Discovery Broker, an advanced Semantic Discovery Broker, and an Access Broker. They are empowered by a suite of tools developed by the ESSI-lab of the CNR-IIA, called: GI-cat, GI-sem, and GI-axe. The EuroGEOSS brokering framework was considered and successfully adopted by cross-disciplinary initiatives (notably GEOSS: Global Earth Observation System of Systems). The brokerage services have been advanced and extended; the new brokering framework is called GEO DAB (Discovery and Access Broker). New brokerage services have been developed in the framework of other European Commission funded projects (e.g. GeoViQua). More recently, the NSF EarthCube initiative decided to fund a project dealing with brokerage services. In the framework of the GEO AIP-6 (Architecture Implementation Pilot -phase 6), the presented brokerage platform has been used by the Water Working Group to carry out improved data access for parameterization and model development.

76 FR 66040 - NIST Framework and Roadmap for Smart Grid Interoperability Standards, Release 2.0 (Draft...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-25

...-01] NIST Framework and Roadmap for Smart Grid Interoperability Standards, Release 2.0 (Draft... draft version of the NIST Framework and Roadmap for Smart Grid Interoperability Standards, Release 2.0... Roadmap for Smart Grid Interoperability Standards, Release 2.0 (Release 2.0) (Draft) for public review and...

Warfighter IT Interoperability Standards Study

DTIC Science & Technology

2012-07-22

data (e.g. messages) between systems ? ii) What process did you used to validate and certify semantic interoperability between your...other systems at this time There was no requirement to validate and certify semantic interoperability The DLS program exchanges data with... semantics Testing for System Compliance with Data Models Verify and Certify Interoperability Using Data

Enabling interoperability in planetary sciences and heliophysics: The case for an information model

NASA Astrophysics Data System (ADS)

Hughes, J. Steven; Crichton, Daniel J.; Raugh, Anne C.; Cecconi, Baptiste; Guinness, Edward A.; Isbell, Christopher E.; Mafi, Joseph N.; Gordon, Mitchell K.; Hardman, Sean H.; Joyner, Ronald S.

2018-01-01

The Planetary Data System has developed the PDS4 Information Model to enable interoperability across diverse science disciplines. The Information Model is based on an integration of International Organization for Standardization (ISO) level standards for trusted digital archives, information model development, and metadata registries. Where controlled vocabularies provides a basic level of interoperability by providing a common set of terms for communication between both machines and humans the Information Model improves interoperability by means of an ontology that provides semantic information or additional related context for the terms. The information model was defined by team of computer scientists and science experts from each of the diverse disciplines in the Planetary Science community, including Atmospheres, Geosciences, Cartography and Imaging Sciences, Navigational and Ancillary Information, Planetary Plasma Interactions, Ring-Moon Systems, and Small Bodies. The model was designed to be extensible beyond the Planetary Science community, for example there are overlaps between certain PDS disciplines and the Heliophysics and Astrophysics disciplines. "Interoperability" can apply to many aspects of both the developer and the end-user experience, for example agency-to-agency, semantic level, and application level interoperability. We define these types of interoperability and focus on semantic level interoperability, the type of interoperability most directly enabled by an information model.

76 FR 51271 - Implementing a Nationwide, Broadband, Interoperable Public Safety Network in the 700 MHz Band

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-18

... Docket 07-100; FCC 11-6] Implementing a Nationwide, Broadband, Interoperable Public Safety Network in the... interoperable public safety broadband network. The establishment of a common air interface for 700 MHz public safety broadband networks will create a foundation for interoperability and provide a clear path for the...

Political, policy and social barriers to health system interoperability: emerging opportunities of Web 2.0 and 3.0.

PubMed

Juzwishin, Donald W M

2009-01-01

Achieving effective health informatics interoperability in a fragmented and uncoordinated health system is by definition not possible. Interoperability requires the simultaneous integration of health care processes and information across different types and levels of care (systems thinking). The fundamental argument of this paper is that information system interoperability will remain an unfulfilled hope until health reforms effectively address the governance (accountability), structural and process barriers to interoperability of health care delivery. The ascendency of Web 2.0 and 3.0, although still unproven, signals the opportunity to accelerate patients' access to health information and their health record. Policy suggestions for simultaneously advancing health system delivery and information system interoperability are posited.

Silicon-on-insulator multimode-interference waveguide-based arrayed optical tweezers (SMART) for two-dimensional microparticle trapping and manipulation.

PubMed

Lei, Ting; Poon, Andrew W

2013-01-28

We demonstrate two-dimensional optical trapping and manipulation of 1 μm and 2.2 μm polystyrene particles in an 18 μm-thick fluidic cell at a wavelength of 1565 nm using the recently proposed Silicon-on-insulator Multimode-interference (MMI) waveguide-based ARrayed optical Tweezers (SMART) technique. The key component is a 100 μm square-core silicon waveguide with mm length. By tuning the fiber-coupling position at the MMI waveguide input facet, we demonstrate various patterns of arrayed optical tweezers that enable optical trapping and manipulation of particles. We numerically simulate the physical mechanisms involved in the arrayed trap, including the optical force, the heat transfer and the thermal-induced microfluidic flow.

Realization of an ultra-compact polarization beam splitter using asymmetric MMI based on silicon nitride / silicon-on-insulator platform.

PubMed

Sun, Xiao; Aitchison, J Stewart; Mojahedi, Mo

2017-04-03

We have experimentally demonstrated a compact polarization beam splitter (PBS) based on the silicon nitride/silicon-on-insulator platform using the recently proposed augmented-low-index-guiding (ALIG) waveguide structure. The two orthogonal polarizations are split in an asymmetric multimode interference (MMI) section, which was 1.6 μm wide and 4.8 μm long. The device works well over the entire C-band wavelength range and has a measured low insertion loss of less than 1 dB. The polarization extinction ratio at the Bar Port is approximately 17 dB and at the Cross Port is approximately 25 dB. The design of the device is robust and has a good fabrication tolerance.

Multimodal transmission property in a liquid-filled photonic crystal fiber

NASA Astrophysics Data System (ADS)

Lin, Wei; Miao, Yinping; Song, Binbin; Zhang, Hao; Liu, Bo; Liu, Yange; Yan, Donglin

2015-02-01

The multimode interference (MMI) effect in a liquid-filled photonic crystal fiber (PCF) has been experimentally demonstrated by fully infiltrating the air-hole cladding of a solid-core PCF with the refractive index (RI) matching liquid whose RI is close to the silica background. Due to the weak mode confinement capability of the cladding region, several high-order modes are excited to establish the multimode interference effect. The multimode interferometer shows a good temperature tunability of 12.30 nm/K, which makes it a good candidate for a highly tunable optical filtering as well as temperature sensing applications. Furthermore, this MMI effect would have great promise in various applications such as highly sensitive multi-parameter sensing, tunable optically filtering, and surface-enhanced Raman scattering.

3D Mueller-matrix mapping of biological optically anisotropic networks

NASA Astrophysics Data System (ADS)

Ushenko, O. G.; Ushenko, V. O.; Bodnar, G. B.; Zhytaryuk, V. G.; Prydiy, O. G.; Koval, G.; Lukashevich, I.; Vanchuliak, O.

2018-01-01

The paper consists of two parts. The first part presents short theoretical basics of the method of azimuthally-invariant Mueller-matrix description of optical anisotropy of biological tissues. It was provided experimentally measured coordinate distributions of Mueller-matrix invariants (MMI) of linear and circular birefringences of skeletal muscle tissue. It was defined the values of statistic moments, which characterize the distributions of amplitudes of wavelet coefficients of MMI at different scales of scanning. The second part presents the data of statistic analysis of the distributions of amplitude of wavelet coefficients of the distributions of linear birefringence of myocardium tissue died after the infarction and ischemic heart disease. It was defined the objective criteria of differentiation of the cause of death.

Multiscale polarization diagnostics of birefringent networks in problems of necrotic changes diagnostics

NASA Astrophysics Data System (ADS)

Sakhnovskiy, M. Yu.; Ushenko, Yu. O.; Ushenko, V. O.; Besaha, R. N.; Pavlyukovich, N.; Pavlyukovich, O.

2018-01-01

The paper consists of two parts. The first part presents short theoretical basics of the method of azimuthally-invariant Mueller-matrix description of optical anisotropy of biological tissues. It was provided experimentally measured coordinate distributions of Mueller-matrix invariants (MMI) of linear and circular birefringences of skeletal muscle tissue. It was defined the values of statistic moments, which characterize the distributions of amplitudes of wavelet coefficients of MMI at different scales of scanning. The second part presents the data of statistic analysis of the distributions of amplitude of wavelet coefficients of the distributions of linear birefringence of myocardium tissue died after the infarction and ischemic heart disease. It was defined the objective criteria of differentiation of the cause of death.

Wavelet analysis of birefringence images of myocardium tissue

NASA Astrophysics Data System (ADS)

Sakhnovskiy, M. Yu.; Ushenko, Yu. O.; Kushnerik, L.; Soltys, I. V.; Pavlyukovich, N.; Pavlyukovich, O.

2018-01-01

The paper consists of two parts. The first part presents short theoretical basics of the method of azimuthally-invariant Mueller-matrix description of optical anisotropy of biological tissues. It was provided experimentally measured coordinate distributions of Mueller-matrix invariants (MMI) of linear and circular birefringences of skeletal muscle tissue. It was defined the values of statistic moments, which characterize the distributions of amplitudes of wavelet coefficients of MMI at different scales of scanning. The second part presents the data of statistic analysis of the distributions of amplitude of wavelet coefficients of the distributions of linear birefringence of myocardium tissue died after the infarction and ischemic heart disease. It was defined the objective criteria of differentiation of the cause of death.

Data Management challenges in Astronomy and Astroparticle Physics

NASA Astrophysics Data System (ADS)

Lamanna, Giovanni

2015-12-01

Astronomy and Astroparticle Physics domains are experiencing a deluge of data with the next generation of facilities prioritised in the European Strategy Forum on Research Infrastructures (ESFRI), such as SKA, CTA, KM3Net and with other world-class projects, namely LSST, EUCLID, EGO, etc. The new ASTERICS-H2020 project brings together the concerned scientific communities in Europe to work together to find common solutions to their Big Data challenges, their interoperability, and their data access. The presentation will highlight these new challenges and the work being undertaken also in cooperation with e-infrastructures in Europe.

A framework for evaluating and utilizing medical terminology mappings.

PubMed

Hussain, Sajjad; Sun, Hong; Sinaci, Anil; Erturkmen, Gokce Banu Laleci; Mead, Charles; Gray, Alasdair J G; McGuinness, Deborah L; Prud'Hommeaux, Eric; Daniel, Christel; Forsberg, Kerstin

2014-01-01

Use of medical terminologies and mappings across them are considered to be crucial pre-requisites for achieving interoperable eHealth applications. Built upon the outcomes of several research projects, we introduce a framework for evaluating and utilizing terminology mappings that offers a platform for i) performing various mappings strategies, ii) representing terminology mappings together with their provenance information, and iii) enabling terminology reasoning for inferring both new and erroneous mappings. We present the results of the introduced framework from SALUS project where we evaluated the quality of both existing and inferred terminology mappings among standard terminologies.

Towards a single seismological service infrastructure in Europe

NASA Astrophysics Data System (ADS)

Spinuso, A.; Trani, L.; Frobert, L.; Van Eck, T.

2012-04-01

In the last five year services and data providers, within the seismological community in Europe, focused their efforts in migrating the way of opening their archives towards a Service Oriented Architecture (SOA). This process tries to follow pragmatically the technological trends and available solutions aiming at effectively improving all the data stewardship activities. These advancements are possible thanks to the cooperation and the follow-ups of several EC infrastructural projects that, by looking at general purpose techniques, combine their developments envisioning a multidisciplinary platform for the earth observation as the final common objective (EPOS, Earth Plate Observation System) One of the first results of this effort is the Earthquake Data Portal (http://www.seismicportal.eu), which provides a collection of tools to discover, visualize and access a variety of seismological data sets like seismic waveform, accelerometric data, earthquake catalogs and parameters. The Portal offers a cohesive distributed search environment, linking data search and access across multiple data providers through interactive web-services, map-based tools and diverse command-line clients. Our work continues under other EU FP7 projects. Here we will address initiatives in two of those projects. The NERA, (Network of European Research Infrastructures for Earthquake Risk Assessment and Mitigation) project will implement a Common Services Architecture based on OGC services APIs, in order to provide Resource-Oriented common interfaces across the data access and processing services. This will improve interoperability between tools and across projects, enabling the development of higher-level applications that can uniformly access the data and processing services of all participants. This effort will be conducted jointly with the VERCE project (Virtual Earthquake and Seismology Research Community for Europe). VERCE aims to enable seismologists to exploit the wealth of seismic data within a data-intensive computation framework, which will be tailored to the specific needs of the community. It will provide a new interoperable infrastructure, as the computational backbone laying behind the publicly available interfaces. VERCE will have to face the challenges of implementing a service oriented architecture providing an efficient layer between the Data and the Grid infrastructures, coupling HPC data analysis and HPC data modeling applications through the execution of workflows and data sharing mechanism. Online registries of interoperable worklflow components, storage of intermediate results and data provenance are those aspects that are currently under investigations to make the VERCE facilities usable from a large scale of users, data and service providers. For such purposes the adoption of a Digital Object Architecture, to create online catalogs referencing and describing semantically all these distributed resources, such as datasets, computational processes and derivative products, is seen as one of the viable solution to monitor and steer the usage of the infrastructure, increasing its efficiency and the cooperation among the community.

Interoperability of Information Systems Managed and Used by the Local Health Departments.

PubMed

Shah, Gulzar H; Leider, Jonathon P; Luo, Huabin; Kaur, Ravneet

2016-01-01

In the post-Affordable Care Act era marked by interorganizational collaborations and availability of large amounts of electronic data from other community partners, it is imperative to assess the interoperability of information systems used by the local health departments (LHDs). To describe the level of interoperability of LHD information systems and identify factors associated with lack of interoperability. This mixed-methods research uses data from the 2015 Informatics Capacity and Needs Assessment Survey, with a target population of all LHDs in the United States. A representative sample of 650 LHDs was drawn using a stratified random sampling design. A total of 324 completed responses were received (50% response rate). Qualitative data were used from a key informant interview study of LHD informatics staff from across the United States. Qualitative data were independently coded by 2 researchers and analyzed thematically. Survey data were cleaned, bivariate comparisons were conducted, and a multivariable logistic regression was run to characterize factors associated with interoperability. For 30% of LHDs, no systems were interoperable, and 38% of LHD respondents indicated some of the systems were interoperable. Significant determinants of interoperability included LHDs having leadership support (adjusted odds ratio [AOR] = 3.54), control of information technology budget allocation (AOR = 2.48), control of data systems (AOR = 2.31), having a strategic plan for information systems (AOR = 1.92), and existence of business process analysis and redesign (AOR = 1.49). Interoperability of all systems may be an informatics goal, but only a small proportion of LHDs reported having interoperable systems, pointing to a substantial need among LHDs nationwide.

National electronic health record interoperability chronology.

PubMed

Hufnagel, Stephen P

2009-05-01

The federal initiative for electronic health record (EHR) interoperability began in 2000 and set the stage for the establishment of the 2004 Executive Order for EHR interoperability by 2014. This article discusses the chronology from the 2001 e-Government Consolidated Health Informatics (CHI) initiative through the current congressional mandates for an aligned, interoperable, and agile DoD AHLTA and VA VistA.

On the formal definition of the systems' interoperability capability: an anthropomorphic approach

NASA Astrophysics Data System (ADS)

Zdravković, Milan; Luis-Ferreira, Fernando; Jardim-Goncalves, Ricardo; Trajanović, Miroslav

2017-03-01

The extended view of enterprise information systems in the Internet of Things (IoT) introduces additional complexity to the interoperability problems. In response to this, the problem of systems' interoperability is revisited by taking into the account the different aspects of philosophy, psychology, linguistics and artificial intelligence, namely by analysing the potential analogies between the processes of human and system communication. Then, the capability to interoperate as a property of the system, is defined as a complex ability to seamlessly sense and perceive a stimulus from its environment (assumingly, a message from any other system), make an informed decision about this perception and consequently, articulate a meaningful and useful action or response, based on this decision. Although this capability is defined on the basis of the existing interoperability theories, the proposed approach to its definition excludes the assumption on the awareness of co-existence of two interoperating systems. Thus, it establishes the links between the research of interoperability of systems and intelligent software agents, as one of the systems' digital identities.

Empowering open systems through cross-platform interoperability

NASA Astrophysics Data System (ADS)

Lyke, James C.

2014-06-01

Most of the motivations for open systems lie in the expectation of interoperability, sometimes referred to as "plug-and-play". Nothing in the notion of "open-ness", however, guarantees this outcome, which makes the increased interest in open architecture more perplexing. In this paper, we explore certain themes of open architecture. We introduce the concept of "windows of interoperability", which can be used to align disparate portions of architecture. Such "windows of interoperability", which concentrate on a reduced set of protocol and interface features, might achieve many of the broader purposes assigned as benefits in open architecture. Since it is possible to engineer proprietary systems that interoperate effectively, this nuanced definition of interoperability may in fact be a more important concept to understand and nurture for effective systems engineering and maintenance.

The International Planetary Data Alliance

NASA Astrophysics Data System (ADS)

Stein, T.; Arviset, C.; Crichton, D. J.

2017-12-01

The International Planetary Data Alliance (IPDA) is an association of partners with the aim of improving the quality of planetary science data and services to the end users of space based instrumentation. The specific mission of the IPDA is to facilitate global access to, and exchange of, high quality scientific data products managed across international boundaries. Ensuring proper capture, accessibility and availability of the data is the task of the individual member space agencies. The IPDA was formed in 2006 with the purpose of adopting standards and developing collaborations across agencies to ensure data is captured in common formats. Member agencies include: Armenian Astronomical Society, China National Space Agency (CNSA), European Space Agency (ESA), German Aerospace Center (DLR), Indian Space Research Organization (ISRO), Italian Space Agency (ASI), Japanese Aerospace Exploration Agency (JAXA), National Air and Space Administration (NASA), National Centre for Space Studies (CNES), Space Research Institute (IKI), UAE Space Agency, and UK Space Agency. The IPDA Steering Committee oversees the execution of projects and coordinates international collaboration. The IPDA conducts a number of focused projects to enable interoperability, construction of compatible archives, and the operation of the IPDA as a whole. These projects have helped to establish the IPDA and to move the collaboration forward. A key project that is currently underway is the implementation of the PDS4 data standard. Given the international focus, it has been critical that the PDS and the IPDA collaborate on its development. Also, other projects have been conducted successfully, including developing the IPDA architecture and corresponding requirements, developing shared registries for data and tools across international boundaries, and common templates for supporting agreements for archiving and sharing data for international missions. Several projects demonstrating interoperability across systems have been applied to specific missions and data sets. IPDA membership is open to space agencies and scientific research institutes. Representatives who are interested in joining the IPDA should contact the author or use the contact form on the web page http://www.planetarydata.org.

A Community-Based Approach to Leading the Nation in Smart Energy Use

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

2013-12-31

Project Objectives The AEP Ohio gridSMART® Demonstration Project (Project) achieved the following objectives: • Built a secure, interoperable, and integrated smart grid infrastructure in northeast central Ohio that demonstrated the ability to maximize distribution system efficiency and reliability and consumer use of demand response programs that reduced energy consumption, peak demand, and fossil fuel emissions. • Actively attracted, educated, enlisted, and retained consumers in innovative business models that provided tools and information reducing consumption and peak demand. • Provided the U.S. Department of Energy (DOE) information to evaluate technologies and preferred smart grid business models to be extended nationally. Projectmore » Description Ohio Power Company (the surviving company of a merger with Columbus Southern Power Company), doing business as AEP Ohio (AEP Ohio), took a community-based approach and incorporated a full suite of advanced smart grid technologies for 110,000 consumers in an area selected for its concentration and diversity of distribution infrastructure and consumers. It was organized and aligned around: • Technology, implementation, and operations • Consumer and stakeholder acceptance • Data management and benefit assessment Combined, these functional areas served as the foundation of the Project to integrate commercially available products, innovative technologies, and new consumer products and services within a secure two-way communication network between the utility and consumers. The Project included Advanced Metering Infrastructure (AMI), Distribution Management System (DMS), Distribution Automation Circuit Reconfiguration (DACR), Volt VAR Optimization (VVO), and Consumer Programs (CP). These technologies were combined with two-way consumer communication and information sharing, demand response, dynamic pricing, and consumer products, such as plug-in electric vehicles and smart appliances. In addition, the Project incorporated comprehensive cyber security capabilities, interoperability, and a data assessment that, with grid simulation capabilities, made the demonstration results an adaptable, integrated solution for AEP Ohio and the nation.« less

Defense Modeling and Simulation Initiative

DTIC Science & Technology

1992-05-01

project solicitation and priority ranking process, and reviewing policy issues . The activities of the DMSO and MSWG are also supported by a series of... issues have been raised for discussion, including: *Proumulgation of standards for the interoperability of models and simulations " Modeling and...have been completed or will be completed in the near term. The policy issues should be defined at a high level in the near term, although their

OneSAF as an In-Stride Mission Command Asset

DTIC Science & Technology

2014-06-01

implementation approach. While DARPA began with a funded project to complete the capability as a “ big bang ” approach the approach here is based on reuse and...Command (MC), Modeling and Simulation (M&S), Distributed Interactive Simulation (DIS) ABSTRACT: To provide greater interoperability and integration...within Mission Command (MC) Systems the One Semi-Automated Forces (OneSAF) entity level simulation is evolving from a tightly coupled client server

Automated Demand Response for Energy Sustainability Cost and Performance Report

DTIC Science & Technology

2015-09-01

Install solar thermal system for pool heating in fitness Bldg 325 2022 $ 21,359 $ 7,199 3.6 yrs Renewable energy project p. 124- 126 Note: All data...and R. Bienert, 2011. Smart Grid Standards and Systems Interoperability: A Precedent with OpenADR, Lawrence Berkeley National Laboratory, LBNL...response (DR) system at Fort Irwin, CA. This demonstration employed industry-standard OpenADR (Open Automated Demand Response) technology to perform

OTF CCSDS Mission Operations Prototype Parameter Service. Phase I: Exit Presentation

NASA Technical Reports Server (NTRS)

Reynolds, Walter F.; Lucord, Steven A.; Stevens, John E.

2009-01-01

This slide presentation reviews the prototype of phase 1 of the parameter service design of the CCSDS mission operations. The project goals are to: (1) Demonstrate the use of Mission Operations standards to implement the Parameter Service (2) Demonstrate interoperability between Houston MCC and a CCSDS Mission Operations compliant mission operations center (3) Utilize Mission Operations Common Architecture. THe parameter service design, interfaces, and structures are described.

Meeting People's Needs in a Fully Interoperable Domotic Environment

PubMed Central

Miori, Vittorio; Russo, Dario; Concordia, Cesare

2012-01-01

The key idea underlying many Ambient Intelligence (AmI) projects and applications is context awareness, which is based mainly on their capacity to identify users and their locations. The actual computing capacity should remain in the background, in the periphery of our awareness, and should only move to the center if and when necessary. Computing thus becomes ‘invisible’, as it is embedded in the environment and everyday objects. The research project described herein aims to realize an Ambient Intelligence-based environment able to improve users' quality of life by learning their habits and anticipating their needs. This environment is part of an adaptive, context-aware framework designed to make today's incompatible heterogeneous domotic systems fully interoperable, not only for connecting sensors and actuators, but for providing comprehensive connections of devices to users. The solution is a middleware architecture based on open and widely recognized standards capable of abstracting the peculiarities of underlying heterogeneous technologies and enabling them to co-exist and interwork, without however eliminating their differences. At the highest level of this infrastructure, the Ambient Intelligence framework, integrated with the domotic sensors, can enable the system to recognize any unusual or dangerous situations and anticipate health problems or special user needs in a technological living environment, such as a house or a public space. PMID:22969322

Archetype Model-Driven Development Framework for EHR Web System.

PubMed

Kobayashi, Shinji; Kimura, Eizen; Ishihara, Ken

2013-12-01

This article describes the Web application framework for Electronic Health Records (EHRs) we have developed to reduce construction costs for EHR sytems. The openEHR project has developed clinical model driven architecture for future-proof interoperable EHR systems. This project provides the specifications to standardize clinical domain model implementations, upon which the ISO/CEN 13606 standards are based. The reference implementation has been formally described in Eiffel. Moreover C# and Java implementations have been developed as reference. While scripting languages had been more popular because of their higher efficiency and faster development in recent years, they had not been involved in the openEHR implementations. From 2007, we have used the Ruby language and Ruby on Rails (RoR) as an agile development platform to implement EHR systems, which is in conformity with the openEHR specifications. We implemented almost all of the specifications, the Archetype Definition Language parser, and RoR scaffold generator from archetype. Although some problems have emerged, most of them have been resolved. We have provided an agile EHR Web framework, which can build up Web systems from archetype models using RoR. The feasibility of the archetype model to provide semantic interoperability of EHRs has been demonstrated and we have verified that that it is suitable for the construction of EHR systems.

Supporting interoperability of collaborative networks through engineering of a service-based Mediation Information System (MISE 2.0)

NASA Astrophysics Data System (ADS)

Benaben, Frederick; Mu, Wenxin; Boissel-Dallier, Nicolas; Barthe-Delanoe, Anne-Marie; Zribi, Sarah; Pingaud, Herve

2015-08-01

The Mediation Information System Engineering project is currently finishing its second iteration (MISE 2.0). The main objective of this scientific project is to provide any emerging collaborative situation with methods and tools to deploy a Mediation Information System (MIS). MISE 2.0 aims at defining and designing a service-based platform, dedicated to initiating and supporting the interoperability of collaborative situations among potential partners. This MISE 2.0 platform implements a model-driven engineering approach to the design of a service-oriented MIS dedicated to supporting the collaborative situation. This approach is structured in three layers, each providing their own key innovative points: (i) the gathering of individual and collaborative knowledge to provide appropriate collaborative business behaviour (key point: knowledge management, including semantics, exploitation and capitalisation), (ii) deployment of a mediation information system able to computerise the previously deduced collaborative processes (key point: the automatic generation of collaborative workflows, including connection with existing devices or services) (iii) the management of the agility of the obtained collaborative network of organisations (key point: supervision of collaborative situations and relevant exploitation of the gathered data). MISE covers business issues (through BPM), technical issues (through an SOA) and agility issues of collaborative situations (through EDA).

Meeting people's needs in a fully interoperable domotic environment.

PubMed

Miori, Vittorio; Russo, Dario; Concordia, Cesare

2012-01-01

The key idea underlying many Ambient Intelligence (AmI) projects and applications is context awareness, which is based mainly on their capacity to identify users and their locations. The actual computing capacity should remain in the background, in the periphery of our awareness, and should only move to the center if and when necessary. Computing thus becomes 'invisible', as it is embedded in the environment and everyday objects. The research project described herein aims to realize an Ambient Intelligence-based environment able to improve users' quality of life by learning their habits and anticipating their needs. This environment is part of an adaptive, context-aware framework designed to make today's incompatible heterogeneous domotic systems fully interoperable, not only for connecting sensors and actuators, but for providing comprehensive connections of devices to users. The solution is a middleware architecture based on open and widely recognized standards capable of abstracting the peculiarities of underlying heterogeneous technologies and enabling them to co-exist and interwork, without however eliminating their differences. At the highest level of this infrastructure, the Ambient Intelligence framework, integrated with the domotic sensors, can enable the system to recognize any unusual or dangerous situations and anticipate health problems or special user needs in a technological living environment, such as a house or a public space.

Archetype modeling methodology.

PubMed

Moner, David; Maldonado, José Alberto; Robles, Montserrat

2018-03-01

Clinical Information Models (CIMs) expressed as archetypes play an essential role in the design and development of current Electronic Health Record (EHR) information structures. Although there exist many experiences about using archetypes in the literature, a comprehensive and formal methodology for archetype modeling does not exist. Having a modeling methodology is essential to develop quality archetypes, in order to guide the development of EHR systems and to allow the semantic interoperability of health data. In this work, an archetype modeling methodology is proposed. This paper describes its phases, the inputs and outputs of each phase, and the involved participants and tools. It also includes the description of the possible strategies to organize the modeling process. The proposed methodology is inspired by existing best practices of CIMs, software and ontology development. The methodology has been applied and evaluated in regional and national EHR projects. The application of the methodology provided useful feedback and improvements, and confirmed its advantages. The conclusion of this work is that having a formal methodology for archetype development facilitates the definition and adoption of interoperable archetypes, improves their quality, and facilitates their reuse among different information systems and EHR projects. Moreover, the proposed methodology can be also a reference for CIMs development using any other formalism. Copyright © 2018 Elsevier Inc. All rights reserved.

Antithyroid Drug Use in Pregnancy and Birth Defects: Why Some Studies Find Clear Associations, and Some Studies Report None.

PubMed

Laurberg, Peter; Andersen, Stine Linding

2015-11-01

Rare cases of birth defects after the use of methimazole (MMI) or carbimazole to treat hyperthyroidism in early pregnancy have been reported since 1972, whereas propylthiouracil (PTU) has not been considered teratogenic. Recently, two studies reported birth defects after the use of MMI in early pregnancy to affect 2-4% of exposed children, and one study also found birth defects after the use of PTU. On the other hand, some published studies did not find associations between the use of thionamides and birth defects. The methods used in the two positive and the four negative reports are reviewed. The two positive studies included a sufficient number of children exposed to MMI (n = 1231 and 1097) to evaluate the studied outcomes, whereas the four negative studies included a much lower number of exposed children (n = 73, 108, 30, and 124). Considering PTU, the birth defects observed in one study were in general milder and tended to be diagnosed and registered only when they resulted in complications and led to surgery after one year of age. None of the negative studies has investigated outcomes after one year of age. Studies finding no associations between early pregnancy exposure to antithyroid drugs and birth defects were either not sufficiently powered or did not study outcomes at optimal ages.

Pharmacokinetics-on-a-Chip Using Label-Free SERS Technique for Programmable Dual-Drug Analysis.

PubMed

Fei, Jiayuan; Wu, Lei; Zhang, Yizhi; Zong, Shenfei; Wang, Zhuyuan; Cui, Yiping

2017-06-23

Synergistic effects of dual or multiple drugs have attracted great attention in medical fields, especially in cancer therapies. We provide a programmable microfluidic platform for pharmacokinetic detection of multiple drugs in multiple cells. The well-designed microfluidic platform includes two 2 × 3 microarrays of cell chambers, two gradient generators, and several pneumatic valves. Through the combined use of valves and gradient generators, each chamber can be controlled to infuse different kinds of living cells and drugs with specific concentrations as needed. In our experiments, 6-mercaptopurine (6MP) and methimazole (MMI) were chosen as two drug models and their pharmacokinetic parameters in different living cells were monitored through intracellular SERS spectra, which reflected the molecular structure of these drugs. The dynamic change of SERS fingerprints from 6MP and MMI molecules were recorded during drug metabolism in living cells. The results indicated that both 6MP and MMI molecules were diffused into the cells within 4 min and excreted out after 36 h. Moreover, the intracellular distribution of these drugs was monitored through SERS mapping. Thus, our microfluidic platform simultaneously accomplishes the functions to monitor pharmacokinetic action, distribution, and fingerprint of multiple drugs in multiple cells. Owing to its real-time, rapid-speed, high-precision, and programmable capability of multiple-drug and multicell analysis, such a microfluidic platform has great potential in drug design and development.

Managing Interoperability for GEOSS - A Report from the SIF

NASA Astrophysics Data System (ADS)

Khalsa, S. J.; Actur, D.; Nativi, S.; Browdy, S.; Eglitis, P.

2009-04-01

The Global Earth Observation System of Systems (GEOSS) is a coordinating and integrating framework for Earth observing and information systems, which are contributed on a voluntary basis by Members and Participating Organizations of the intergovernmental Group on Earth Observations (GEO). GEOSS exists to support informed decision making for the benefit of society, including the implementation of international environmental treaty obligations. GEO Members and Participating organizations use the GEOSS Common Infrastructure (GCI) to register their Earth observation resources, thereby making them discoverable and consumable by both humans and client applications. Essential to meeting GEO user needs is a process for supporting interoperability of observing, processing, modeling and dissemination capabilities. The GEO Standards and Interoperability Forum (SIF) was created to develop, implement and oversee this process. The SIF supports GEO organizations contributing resources to the GEOSS by helping them understand and work with the GEOSS interoperability guidelines and encouraging them to register their "interoperability arrangements" (standards or other ad hoc arrangements for interoperability) in the GEOSS standards registry, which is part of the GCI. These registered interoperability arrangements support the actual services used to achieve interoperability of systems. By making information about these interoperability arrangements available to users of the GEOSS the SIF enhances the understanding and utility of contributed resources. We describe the procedures that the SIF has enacted to carry out its work. To operate effectively the SIF uses a workflow system and is establishing a set of regional teams and domain experts. In the near term our work has focused on population and review of the GEOSS Standards Registry, but we are also developing approaches to achieving progressive convergence on, and uptake of, an optimal set of interoperability arrangements for all of GEOSS.

Interoperability of Information Systems Managed and Used by the Local Health Departments

PubMed Central

Leider, Jonathon P.; Luo, Huabin; Kaur, Ravneet

2016-01-01

Background: In the post-Affordable Care Act era marked by interorganizational collaborations and availability of large amounts of electronic data from other community partners, it is imperative to assess the interoperability of information systems used by the local health departments (LHDs). Objectives: To describe the level of interoperability of LHD information systems and identify factors associated with lack of interoperability. Data and Methods: This mixed-methods research uses data from the 2015 Informatics Capacity and Needs Assessment Survey, with a target population of all LHDs in the United States. A representative sample of 650 LHDs was drawn using a stratified random sampling design. A total of 324 completed responses were received (50% response rate). Qualitative data were used from a key informant interview study of LHD informatics staff from across the United States. Qualitative data were independently coded by 2 researchers and analyzed thematically. Survey data were cleaned, bivariate comparisons were conducted, and a multivariable logistic regression was run to characterize factors associated with interoperability. Results: For 30% of LHDs, no systems were interoperable, and 38% of LHD respondents indicated some of the systems were interoperable. Significant determinants of interoperability included LHDs having leadership support (adjusted odds ratio [AOR] = 3.54), control of information technology budget allocation (AOR = 2.48), control of data systems (AOR = 2.31), having a strategic plan for information systems (AOR = 1.92), and existence of business process analysis and redesign (AOR = 1.49). Conclusion: Interoperability of all systems may be an informatics goal, but only a small proportion of LHDs reported having interoperable systems, pointing to a substantial need among LHDs nationwide. PMID:27684616

Investigating interoperability of the LSST data management software stack with Astropy

NASA Astrophysics Data System (ADS)

Jenness, Tim; Bosch, James; Owen, Russell; Parejko, John; Sick, Jonathan; Swinbank, John; de Val-Borro, Miguel; Dubois-Felsmann, Gregory; Lim, K.-T.; Lupton, Robert H.; Schellart, Pim; Krughoff, K. S.; Tollerud, Erik J.

2016-07-01

The Large Synoptic Survey Telescope (LSST) will be an 8.4m optical survey telescope sited in Chile and capable of imaging the entire sky twice a week. The data rate of approximately 15TB per night and the requirements to both issue alerts on transient sources within 60 seconds of observing and create annual data releases means that automated data management systems and data processing pipelines are a key deliverable of the LSST construction project. The LSST data management software has been in development since 2004 and is based on a C++ core with a Python control layer. The software consists of nearly a quarter of a million lines of code covering the system from fundamental WCS and table libraries to pipeline environments and distributed process execution. The Astropy project began in 2011 as an attempt to bring together disparate open source Python projects and build a core standard infrastructure that can be used and built upon by the astronomy community. This project has been phenomenally successful in the years since it has begun and has grown to be the de facto standard for Python software in astronomy. Astropy brings with it considerable expectations from the community on how astronomy Python software should be developed and it is clear that by the time LSST is fully operational in the 2020s many of the prospective users of the LSST software stack will expect it to be fully interoperable with Astropy. In this paper we describe the overlap between the LSST science pipeline software and Astropy software and investigate areas where the LSST software provides new functionality. We also discuss the possibilities of re-engineering the LSST science pipeline software to build upon Astropy, including the option of contributing affliated packages.

Approaching semantic interoperability in Health Level Seven

PubMed Central

Alschuler, Liora

2010-01-01

‘Semantic Interoperability’ is a driving objective behind many of Health Level Seven's standards. The objective in this paper is to take a step back, and consider what semantic interoperability means, assess whether or not it has been achieved, and, if not, determine what concrete next steps can be taken to get closer. A framework for measuring semantic interoperability is proposed, using a technique called the ‘Single Logical Information Model’ framework, which relies on an operational definition of semantic interoperability and an understanding that interoperability improves incrementally. Whether semantic interoperability tomorrow will enable one computer to talk to another, much as one person can talk to another person, is a matter for speculation. It is assumed, however, that what gets measured gets improved, and in that spirit this framework is offered as a means to improvement. PMID:21106995

Towards semantic interoperability for electronic health records.

PubMed

Garde, Sebastian; Knaup, Petra; Hovenga, Evelyn; Heard, Sam

2007-01-01

In the field of open electronic health records (EHRs), openEHR as an archetype-based approach is being increasingly recognised. It is the objective of this paper to shortly describe this approach, and to analyse how openEHR archetypes impact on health professionals and semantic interoperability. Analysis of current approaches to EHR systems, terminology and standards developments. In addition to literature reviews, we organised face-to-face and additional telephone interviews and tele-conferences with members of relevant organisations and committees. The openEHR archetypes approach enables syntactic interoperability and semantic interpretability -- both important prerequisites for semantic interoperability. Archetypes enable the formal definition of clinical content by clinicians. To enable comprehensive semantic interoperability, the development and maintenance of archetypes needs to be coordinated internationally and across health professions. Domain knowledge governance comprises a set of processes that enable the creation, development, organisation, sharing, dissemination, use and continuous maintenance of archetypes. It needs to be supported by information technology. To enable EHRs, semantic interoperability is essential. The openEHR archetypes approach enables syntactic interoperability and semantic interpretability. However, without coordinated archetype development and maintenance, 'rank growth' of archetypes would jeopardize semantic interoperability. We therefore believe that openEHR archetypes and domain knowledge governance together create the knowledge environment required to adopt EHRs.

Cyberinfrastructure Initiatives of the Committee on Earth Observation Satellites (CEOS) Working Group on Information Systems and Services (WGISS)

NASA Astrophysics Data System (ADS)

McDonald, K. R.; Faundeen, J. L.; Petiteville, I.

2005-12-01

The Committee on Earth Observation Satellites (CEOS) was established in 1984 in response to a recommendation from the Economic Summit of Industrialized Nations Working Group on Growth, Technology, and Employment's Panel of Experts on Satellite Remote Sensing. CEOS participants are Members, who are national or international governmental organizations who operate civil spaceborne Earth observation satellites, and Associates who are governmental organizations with civil space programs in development or international scientific or governmental bodies who have an interest in and support CEOS objectives. The primary objective of CEOS is to optimize benefits of satellite Earth observations through cooperation of its participants in mission planning and in development of compatible data products, formats, services, applications and policies. To pursue its objectives, CEOS establishes working groups and associated subgroups that focus on relevant areas of interest. While the structure of CEOS has evolved over its lifetime, today there are three permanent working groups. One is the Working Group on Calibration and Validation that addresses sensor-specific calibration and validation and geophysical parameter validation. A second is the Working Group on Education, Training, and Capacity Building that facilitates activities that enhance international education and training in Earth observation techniques, data analysis, interpretation and applications, with a particular focus on developing countries. The third permanent working group is the Working Group on Information Systems and Services (WGISS). The purpose of WGISS is to promote collaboration in the development of the systems and services based on international standards that manage and supply the Earth observation data and information from participating agencies' missions. WGISS places great emphasis on the use of demonstration projects involving user groups to solve the critical interoperability issues associated with the achievement of global services and its structure reflects that objective. The Technology and Services Subgroup initiates tasks to explore emerging technologies that can be employed to create data and information systems and to develop interoperable services. The interests of the subgroup span the full range of the information processing chain from the initial ingestion of satellite data into archives through to the incorporation of derived information into end-user applications. The subgroup has overseen the creation of an Interoperable Directory Network and an Interoperable Catalog System and has tasks that are investigating the use of new technologies such as Web Services, Grid, and Open Geographical Information Systems to provide enhanced capabilities. The WGISS Projects and Applications Subgroup works with outside organizations to understand their requirements and then helps them to exploit the tools and services available through WGISS and its members and associates. WGISS has instituted the concept of a WGISS Test Facility to test and develop information systems and services prototypes collaboratively with these organizations to meet their specific requirements. This approach has the dual benefit of addressing real information systems and services needs of science and applications projects and helping WGISS to expand and improve its capabilities based on the experience and lessons learned from working with the projects.

Interoperability challenges for the Sustainable Management of seagrass meadows (Invited)

NASA Astrophysics Data System (ADS)

Nativi, S.; Pastres, R.; Bigagli, L.; Venier, C.; Zucchetta, M.; Santoro, M.

2013-12-01

Seagrass meadows (marine angiosperm plants) occupy less than 0.2% of the global ocean surface, annually store about 10-18% of the so-called 'Blue Carbon', i.e. the Carbon stored in coastal vegetated areas. Recent literature estimates that the flux to the long-term carbon sink in seagrasses represents 10-20% of seagrasses global average production. Such figures can be translated into economic benefits, taking into account that a ton of carbon dioxide in Europe is paid at around 15 € in the carbon market. This means that the organic carbon retained in seagrass sediments in the Mediterranean is worth 138 - 1128 billion €, which represents 6-23 € per square meter. This is 9-35 times more than one square meter of tropical forest soil (0.66 € per square meter), or 5-17 times when considering both the above and the belowground compartments in tropical forests. According the most conservative estimations, about 10% of the Mediterranean meadows have been lost during the last century. In the framework of the GEOSS (Global Earth Observation System of Systems) initiative, the MEDINA project (funded by the European Commission and coordinated by the University of Ca'Foscari in Venice) prepared a showcase as part of the GEOSS Architecture Interoperability Pilot -phase 6 (AIP-6). This showcase aims at providing a tool for the sustainable management of seagrass meadows along the Mediterranean coastline. The application is based on an interoperability framework providing a set of brokerage services to easily ingest and run a Habitat Suitability model (a model predicting the probability a given site to provide a suitable habitat for the development of seagrass meadow and the average coverage expected). The presentation discusses such a framework explaining how the input data is discovered, accessed and processed to ingest the model (developed in the MEDINA project). Furthermore, the brokerage framework provides the necessary services to run the model and visualize results with a low entry barrier for Scientists.

Study and Simulation of Enhancements for TCP (Transmission Control Protocol) Performance Over Noisy, High-Latency Links

NASA Technical Reports Server (NTRS)

Shepard, Timothy J.; Partridge, Craig; Coulter, Robert

1997-01-01

The designers of the TCP/IP protocol suite explicitly included support of satellites in their design goals. The goal of the Internet Project was to design a protocol which could be layered over different networking technologies to allow them to be concatenated into an internet. The results of this project included two protocols, IP and TCP. IP is the protocol used by all elements in the network and it defines the standard packet format for IP datagrams. TCP is the end-to-end transport protocol commonly used between end systems on the Internet to derive a reliable bi-directional byte-pipe service from the underlying unreliable IP datagram service. Satellite links are explicitly mentioned in Vint Cerf's 2-page article which appeared in 1980 in CCR [2] to introduce the specifications for IP and TCP. In the past fifteen years, TCP has been demonstrated to work over many differing networking technologies, including over paths including satellites links. So if satellite links were in the minds of the designers from the beginning, what is the problem? The problem is that the performance of TCP has in some cases been disappointing. A goal of the authors of the original specification of TCP was to specify only enough behavior to ensure interoperability. The specification left a number of important decisions, in particular how much data is to be sent when, to the implementor. This was deliberately' done. By leaving performance-related decisions to the implementor, this would allow the protocol TCP to be tuned and adapted to different networks and situations in the future without the need to revise the specification of the protocol, or break interoperability. Interoperability would continue while future implementations would be allowed flexibility to adapt to needs which could not be anticipated at the time of the original protocol design.

The Health Service Bus: an architecture and case study in achieving interoperability in healthcare.

PubMed

Ryan, Amanda; Eklund, Peter

2010-01-01

Interoperability in healthcare is a requirement for effective communication between entities, to ensure timely access to up to-date patient information and medical knowledge, and thus facilitate consistent patient care. An interoperability framework called the Health Service Bus (HSB), based on the Enterprise Service Bus (ESB) middleware software architecture is presented here as a solution to all three levels of interoperability as defined by the HL7 EHR Interoperability Work group in their definitive white paper "Coming to Terms". A prototype HSB system was implemented based on the Mule Open-Source ESB and is outlined and discussed, followed by a clinically-based example.

PACS/information systems interoperability using Enterprise Communication Framework.

PubMed

alSafadi, Y; Lord, W P; Mankovich, N J

1998-06-01

Interoperability among healthcare applications goes beyond connectivity to allow components to exchange structured information and work together in a predictable, coordinated fashion. To facilitate building an interoperability infrastructure, an Enterprise Communication Framework (ECF) was developed by the members of the Andover Working Group for Healthcare Interoperability (AWG-OHI). The ECF consists of four models: 1) Use Case Model, 2) Domain Information Model (DIM), 3) Interaction Model, and 4) Message Model. To realize this framework, a software component called the Enterprise Communicator (EC) is used. In this paper, we will demonstrate the use of the framework in interoperating a picture archiving and communication system (PACS) with a radiology information system (RIS).

The role of architecture and ontology for interoperability.

PubMed

Blobel, Bernd; González, Carolina; Oemig, Frank; Lopéz, Diego; Nykänen, Pirkko; Ruotsalainen, Pekka

2010-01-01

Turning from organization-centric to process-controlled or even to personalized approaches, advanced healthcare settings have to meet special interoperability challenges. eHealth and pHealth solutions must assure interoperability between actors cooperating to achieve common business objectives. Hereby, the interoperability chain also includes individually tailored technical systems, but also sensors and actuators. For enabling corresponding pervasive computing and even autonomic computing, individualized systems have to be based on an architecture framework covering many domains, scientifically managed by specialized disciplines using their specific ontologies in a formalized way. Therefore, interoperability has to advance from a communication protocol to an architecture-centric approach mastering ontology coordination challenges.

High bandwidth all-optical 3×3 switch based on multimode interference structures

NASA Astrophysics Data System (ADS)

Le, Duy-Tien; Truong, Cao-Dung; Le, Trung-Thanh

2017-03-01

A high bandwidth all-optical 3×3 switch based on general interference multimode interference (GI-MMI) structure is proposed in this study. Two 3×3 multimode interference couplers are cascaded to realize an all-optical switch operating at both wavelengths of 1550 nm and 1310 nm. Two nonlinear directional couplers at two outer-arms of the structure are used as all-optical phase shifters to achieve all switching states and to control the switching states. Analytical expressions for switching operation using the transfer matrix method are presented. The beam propagation method (BPM) is used to design and optimize the whole structure. The optimal design of the all-optical phase shifters and 3×3 MMI couplers are carried out to reduce the switching power and loss.

Fast Computation of Ground Motion Shaking Map base on the Modified Stochastic Finite Fault Modeling

NASA Astrophysics Data System (ADS)

Shen, W.; Zhong, Q.; Shi, B.

2012-12-01

Rapidly regional MMI mapping soon after a moderate-large earthquake is crucial to loss estimation, emergency services and planning of emergency action by the government. In fact, many countries show different degrees of attention on the technology of rapid estimation of MMI , and this technology has made significant progress in earthquake-prone countries. In recent years, numerical modeling of strong ground motion has been well developed with the advances of computation technology and earthquake science. The computational simulation of strong ground motion caused by earthquake faulting has become an efficient way to estimate the regional MMI distribution soon after earthquake. In China, due to the lack of strong motion observation in network sparse or even completely missing areas, the development of strong ground motion simulation method has become an important means of quantitative estimation of strong motion intensity. In many of the simulation models, stochastic finite fault model is preferred to rapid MMI estimating for its time-effectiveness and accuracy. In finite fault model, a large fault is divided into N subfaults, and each subfault is considered as a small point source. The ground motions contributed by each subfault are calculated by the stochastic point source method which is developed by Boore, and then summed at the observation point to obtain the ground motion from the entire fault with a proper time delay. Further, Motazedian and Atkinson proposed the concept of Dynamic Corner Frequency, with the new approach, the total radiated energy from the fault and the total seismic moment are conserved independent of subfault size over a wide range of subfault sizes. In current study, the program EXSIM developed by Motazedian and Atkinson has been modified for local or regional computations of strong motion parameters such as PGA, PGV and PGD, which are essential for MMI estimating. To make the results more reasonable, we consider the impact of V30 for the ground shaking intensity, and the results of the comparisons between the simulated and observed MMI for the 2004 Mw 6.0 Parkfield earthquake, the 2008 Mw 7.9Wenchuan earthquake and the 1976 Mw 7.6Tangshan earthquake is fairly well. Take Parkfield earthquake as example, the simulative result reflect the directivity effect and the influence of the shallow velocity structure well. On the other hand, the simulative data is in good agreement with the network data and NGA (Next Generation Attenuation). The consumed time depends on the number of the subfaults and the number of the grid point. For the 2004 Mw 6.0 Parkfield earthquake, the grid size we calculated is 2.5° × 2.5°, the grid space is 0.025°, and the total time consumed is about 1.3hours. For the 2008 Mw 7.9 Wenchuan earthquake, the grid size calculated is 10° × 10°, the grid space is 0.05°, the total number of grid point is more than 40,000, and the total time consumed is about 7.5 hours. For t the 1976 Mw 7.6 Tangshan earthquake, the grid size we calculated is 4° × 6°, the grid space is 0.05°, and the total time consumed is about 2.1 hours. The CPU we used is 3.40GHz, and such computational time could further reduce by using GPU computing technique and other parallel computing technique. This is also our next focus.

Building a portable data and information interoperability infrastructure-framework for a standard Taiwan Electronic Medical Record Template.

PubMed

Jian, Wen-Shan; Hsu, Chien-Yeh; Hao, Te-Hui; Wen, Hsyien-Chia; Hsu, Min-Huei; Lee, Yen-Liang; Li, Yu-Chuan; Chang, Polun

2007-11-01

Traditional electronic health record (EHR) data are produced from various hospital information systems. They could not have existed independently without an information system until the incarnation of XML technology. The interoperability of a healthcare system can be divided into two dimensions: functional interoperability and semantic interoperability. Currently, no single EHR standard exists that provides complete EHR interoperability. In order to establish a national EHR standard, we developed a set of local EHR templates. The Taiwan Electronic Medical Record Template (TMT) is a standard that aims to achieve semantic interoperability in EHR exchanges nationally. The TMT architecture is basically composed of forms, components, sections, and elements. Data stored in the elements which can be referenced by the code set, data type, and narrative block. The TMT was established with the following requirements in mind: (1) transformable to international standards; (2) having a minimal impact on the existing healthcare system; (3) easy to implement and deploy, and (4) compliant with Taiwan's current laws and regulations. The TMT provides a basis for building a portable, interoperable information infrastructure for EHR exchange in Taiwan.

Temperature-dependent transitions between normal and inverse isotope effects pertaining to the interaction of H-H and C-H bonds with transition metal centers.

PubMed

Parkin, Gerard

2009-02-17

Deuterium kinetic isotope effects (KIEs) serve as versatile tools to infer details about reaction mechanisms and the nature of transition states, while equilibrium isotope effects (EIEs) associated with the site preferences of hydrogen and deuterium enable researchers to study aspects of molecular structure. Researchers typically interpret primary deuterium isotope effects based on two simple guidelines: (i) the KIE for an elementary reaction is normal (k(H)/k(D) > 1) and (ii) the EIE is dictated by deuterium preferring to be located in the site corresponding to the highest frequency oscillator. In this Account, we evaluate the applicability of these rules to the interactions of H-H and C-H bonds with a transition metal center. Significantly, experimental and computational studies question the predictability of primary EIEs in these systems based on the notion that deuterium prefers to occupy the highest frequency oscillator. In particular, the EIEs for (i) formation of sigma-complexes by coordination of H-H and C-H bonds and (ii) oxidative addition of dihydrogen exhibit unusual temperature dependencies, such that the same system may demonstrate both normal (i.e., K(H)/K(D) > 1) and inverse (i.e., K(H)/K(D) < 1) values. The transition between a normal and inverse EIE indicates that these systems do not demonstrate the typical monotonic variation predicted by the van't Hoff relationship. Instead, the calculated EIEs in these systems are 0 at 0 K, increase to a value greater than 1, and then decrease to unity at infinite temperature. This unusual behavior may be rationalized by considering the individual factors that contribute to the EIE. Specifically, the EIE may be expressed in the form EIE = SYM x MMI x EXC x ZPE (where SYM is the symmetry factor, MMI is the mass-moment of inertia term, EXC is the excitation term, and ZPE is the zero-point energy term), and the distinctive temperature profile results from the inverse ZPE (enthalpy) and normal [SYM x MMI x EXC] (entropy) components opposing each other and having different temperature dependencies. At low temperatures, the ZPE component dominates and the EIE is inverse, while at high temperatures, the [SYM x MMI x EXC] component dominates and the EIE is normal. The inverse nature of the ZPE term is a consequence of the rotational and translational degrees of freedom of RH (R = H, CH(3)) becoming low-energy isotopically sensitive vibrations in the product, while the normal nature of the [SYM x MMI x EXC] component results from deuterium substitution having a larger impact on the moment of inertia of the smaller molecule.

System and methods of resource usage using an interoperable management framework

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heileman, Gregory L.; Jamkhedkar, Pramod A.; Lamb, Christopher C.

Generic rights expression language allowing interoperability across different computing environments including resource usage of different applications. A formal framework for usage management provides scaffolding upon which interoperable usage management systems can be built. Certain features of the framework are standardized, such as the operational semantics, including areas free of standards that necessitate choice and innovation to achieve a balance of flexibility and usability for interoperability in usage management systems.

Information Management Challenges in Achieving Coalition Interoperability

DTIC Science & Technology

2001-12-01

by J. Dyer SESSION I: ARCHITECTURES AND STANDARDS: FUNDAMENTAL ISSUES Chairman: Dr I. WHITE (UK) Planning for Interoperability 1 by W.M. Gentleman...framework – a crucial step toward achieving coalition C4I interoperability. TOPICS TO BE COVERED: 1 ) Maintaining secure interoperability 2) Command...d’une coalition. SUJETS À EXAMINER : 1 ) Le maintien d’une interopérabilité sécurisée 2) Les interfaces des systèmes de commandement : 2a

DOE Office of Scientific and Technical Information (OSTI.GOV)

Widergren, Steven E.; Knight, Mark R.; Melton, Ronald B.

The Interoperability Strategic Vision whitepaper aims to promote a common understanding of the meaning and characteristics of interoperability and to provide a strategy to advance the state of interoperability as applied to integration challenges facing grid modernization. This includes addressing the quality of integrating devices and systems and the discipline to improve the process of successfully integrating these components as business models and information technology improve over time. The strategic vision for interoperability described in this document applies throughout the electric energy generation, delivery, and end-use supply chain. Its scope includes interactive technologies and business processes from bulk energy levelsmore » to lower voltage level equipment and the millions of appliances that are becoming equipped with processing power and communication interfaces. A transformational aspect of a vision for interoperability in the future electric system is the coordinated operation of intelligent devices and systems at the edges of grid infrastructure. This challenge offers an example for addressing interoperability concerns throughout the electric system.« less

Space Network Interoperability Panel (SNIP) study

NASA Technical Reports Server (NTRS)

Ryan, Thomas; Lenhart, Klaus; Hara, Hideo

1991-01-01

The Space Network Interoperability Panel (SNIP) study is a tripartite study that involves the National Aeronautics and Space Administration (NASA), the European Space Agency (ESA), and the National Space Development Agency (NASDA) of Japan. SNIP involves an ongoing interoperability study of the Data Relay Satellite (DRS) Systems of the three organizations. The study is broken down into two parts; Phase one deals with S-band (2 GHz) interoperability and Phase two deals with Ka-band (20/30 GHz) interoperability (in addition to S-band). In 1987 the SNIP formed a Working Group to define and study operations concepts and technical subjects to assure compatibility of the international data relay systems. Since that time a number of Panel and Working Group meetings have been held to continue the study. Interoperability is of interest to the three agencies because it offers a number of potential operation and economic benefits. This paper presents the history and status of the SNIP study.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dirske, R.D.; Hauck, P.C.; Kachmar, R.P.

In 1990, the federal government enacted the Clean Air Amendment. This required many public power utilities across the country to make modifications to their fossil fueled power plants to comply with the mandated emission levels by May 1995. At Pennsylvania Electric Company`s (PENELEC) Shawville Station, Units 3 and 4, the mandates established maximum nitrogen oxides (NOx) emission levels at 0.45 lbs/MMBTU. In an effort to comply with the new reduced emission levels, PENELEC chose to implement the Asea Brown Boveri-Combustion Engineering`s (ABB-CE) Low NOx Concentric Firing System III (LNCFS-III). PENELEC also took this opportunity to replace other controls because theirmore » implementation would have relatively little impact on the overall cost of the project and would enhance the ability of the operators to better control NOx emissions. This paper discusses the implementation of the new controls in a distributed control system (DCS), interfacing the DCS with the existing pneumatic combustion controls, and maintaining the boiler control benchboard as the primary operator interface, thereby, reducing the impact of the changes to the MMI and the overall cost of the project.« less

The Blue Button Project: Engaging Patients in Healthcare by a Click of a Button.

PubMed

Mohsen, Mona Omar; Aziz, Hassan A

2015-01-01

The Blue Button project has become a way for many Americans to download their health records by just a click in any way that suits them, such as in print, on a thumb drive, or on their mobile devices and smartphones. Several organizations have developed and applied Blue Buttons on their websites to allow beneficiaries to securely access and view personal medical information and claims. The purpose of this literature review is to highlight the significance of the Blue Button project in the field of health information management. Findings suggest that the project could empower and engage consumers and patients in a healthcare system by allowing access to medical records, thereby promoting better management and overall improvement of their healthcare. To date, the project has gained wide support from insurers, technology companies, and health providers despite the challenges of standardization and interoperability.

The Blue Button Project: Engaging Patients in Healthcare by a Click of a Button

PubMed Central

Mohsen, Mona Omar; Aziz, Hassan A.

2015-01-01

The Blue Button project has become a way for many Americans to download their health records by just a click in any way that suits them, such as in print, on a thumb drive, or on their mobile devices and smartphones. Several organizations have developed and applied Blue Buttons on their websites to allow beneficiaries to securely access and view personal medical information and claims. The purpose of this literature review is to highlight the significance of the Blue Button project in the field of health information management. Findings suggest that the project could empower and engage consumers and patients in a healthcare system by allowing access to medical records, thereby promoting better management and overall improvement of their healthcare. To date, the project has gained wide support from insurers, technology companies, and health providers despite the challenges of standardization and interoperability. PMID:26755898

Implementing Interoperability in the Seafood Industry: Learning from Experiences in Other Sectors.

PubMed

Bhatt, Tejas; Gooch, Martin; Dent, Benjamin; Sylvia, Gilbert

2017-08-01

Interoperability of communication and information technologies within and between businesses operating along supply chains is being pursued and implemented in numerous industries worldwide to increase the efficiency and effectiveness of operations. The desire for greater interoperability is also driven by the need to reduce business risk through more informed management decisions. Interoperability is achieved by the development of a technology architecture that guides the design and implementation of communication systems existing within individual businesses and between businesses comprising the supply chain. Technology architectures are developed through a purposeful dialogue about why the architecture is required, the benefits and opportunities that the architecture offers the industry, and how the architecture will translate into practical results. An assessment of how the finance, travel, and health industries and a sector of the food industry-fresh produce-have implemented interoperability was conducted to identify lessons learned that can aid the development of interoperability in the seafood industry. The findings include identification of the need for strong, effective governance during the establishment and operation of an interoperability initiative to ensure the existence of common protocols and standards. The resulting insights were distilled into a series of principles for enabling syntactic and semantic interoperability in any industry, which we summarize in this article. Categorized as "structural," "operational," and "integrative," the principles describe requirements and solutions that are pivotal to enabling businesses to create and capture value from full chain interoperability. The principles are also fundamental to allowing governments and advocacy groups to use traceability for public good. © 2017 Institute of Food Technologists®.

Health Care IT Collaboration in Massachusetts: The Experience of Creating Regional Connectivity

PubMed Central

Halamka, John; Aranow, Meg; Ascenzo, Carl; Bates, David; Debor, Greg; Glaser, John; Goroll, Allan; Stowe, Jim; Tripathi, Micky; Vineyard, Gordon

2005-01-01

The state of Massachusetts has significant early experience in planning for and implementing interoperability networks for exchange of clinical and financal data. Members of our evolving data-sharing organizations gained valuable experience that is of potential benefit to others regarding the governance, policies, and technologies underpinning regional health information organizations. We describe the history, roles, and evolution of organizations and their plans for and success with pilot projects. PMID:16049225

C3I and Modelling and Simulation (M&S) Interoperability

DTIC Science & Technology

2004-03-01

customised Open Source products. The technical implementation is based on the use of the eXtendend Markup Language (XML) and Python . XML is developed...to structure, store and send information. The language is focus on the description of data. Python is a portable, interpreted, object-oriented...programming language. A huge variety of usable Open Source Projects were issued by the Python Community. 3.1 Phase 1: Feasibility Studies Phase 1 was

A multi-service data management platform for scientific oceanographic products

NASA Astrophysics Data System (ADS)

D'Anca, Alessandro; Conte, Laura; Nassisi, Paola; Palazzo, Cosimo; Lecci, Rita; Cretì, Sergio; Mancini, Marco; Nuzzo, Alessandra; Mirto, Maria; Mannarini, Gianandrea; Coppini, Giovanni; Fiore, Sandro; Aloisio, Giovanni

2017-02-01

An efficient, secure and interoperable data platform solution has been developed in the TESSA project to provide fast navigation and access to the data stored in the data archive, as well as a standard-based metadata management support. The platform mainly targets scientific users and the situational sea awareness high-level services such as the decision support systems (DSS). These datasets are accessible through the following three main components: the Data Access Service (DAS), the Metadata Service and the Complex Data Analysis Module (CDAM). The DAS allows access to data stored in the archive by providing interfaces for different protocols and services for downloading, variables selection, data subsetting or map generation. Metadata Service is the heart of the information system of the TESSA products and completes the overall infrastructure for data and metadata management. This component enables data search and discovery and addresses interoperability by exploiting widely adopted standards for geospatial data. Finally, the CDAM represents the back-end of the TESSA DSS by performing on-demand complex data analysis tasks.

Science friction: data, metadata, and collaboration.

PubMed

Edwards, Paul N; Mayernik, Matthew S; Batcheller, Archer L; Bowker, Geoffrey C; Borgman, Christine L

2011-10-01

When scientists from two or more disciplines work together on related problems, they often face what we call 'science friction'. As science becomes more data-driven, collaborative, and interdisciplinary, demand increases for interoperability among data, tools, and services. Metadata--usually viewed simply as 'data about data', describing objects such as books, journal articles, or datasets--serve key roles in interoperability. Yet we find that metadata may be a source of friction between scientific collaborators, impeding data sharing. We propose an alternative view of metadata, focusing on its role in an ephemeral process of scientific communication, rather than as an enduring outcome or product. We report examples of highly useful, yet ad hoc, incomplete, loosely structured, and mutable, descriptions of data found in our ethnographic studies of several large projects in the environmental sciences. Based on this evidence, we argue that while metadata products can be powerful resources, usually they must be supplemented with metadata processes. Metadata-as-process suggests the very large role of the ad hoc, the incomplete, and the unfinished in everyday scientific work.

Adapting the design of Anesthesia Information Management Systems to innovations depicted in Industrial Property documents.

PubMed

Spyropoulos, B; Tzavaras, A; Zogogianni, D; Botsivaly, M

2013-01-01

The purpose of this paper is to present the design and the current development status of an Anesthesia Information Management System (AIMS). For this system, the physical and technical advances, depicted in relevant, recently published Industrial Property documents, have been taken into account. Additional innovative sensors create further data-load to be managed. Novel wireless data-transmission modes demand eventually compliance to further proper standards, so that interoperability between AIMS and the existing Hospital Information Systems is being sustained. We attempted to define, the state-of-the-art concerning the functions, the design-prerequisites and the relevant standards and of an "emerging" AIMS that is combining hardware innovation, real-time data acquisition, processing and displaying and lastly enabling the necessary interoperability with the other components of the existing Hospital Information Systems. Finally, we report based on this approach, about the design and implementation status, of our "real-world" system under development and discuss the multifarious obstacles encountered during this still on-going project.

BioHackathon series in 2011 and 2012: penetration of ontology and linked data in life science domains

PubMed Central

2014-01-01

The application of semantic technologies to the integration of biological data and the interoperability of bioinformatics analysis and visualization tools has been the common theme of a series of annual BioHackathons hosted in Japan for the past five years. Here we provide a review of the activities and outcomes from the BioHackathons held in 2011 in Kyoto and 2012 in Toyama. In order to efficiently implement semantic technologies in the life sciences, participants formed various sub-groups and worked on the following topics: Resource Description Framework (RDF) models for specific domains, text mining of the literature, ontology development, essential metadata for biological databases, platforms to enable efficient Semantic Web technology development and interoperability, and the development of applications for Semantic Web data. In this review, we briefly introduce the themes covered by these sub-groups. The observations made, conclusions drawn, and software development projects that emerged from these activities are discussed. PMID:24495517

Using Citygml to Deploy Smart-City Services for Urban Ecosystems

NASA Astrophysics Data System (ADS)

Prandi, F.; De Amicis, R.; Piffer, S.; Soave, M.; Cadzow, S.; Gonzalez Boix, E.; D'Hont, E.

2013-05-01

The rapid technological evolution, which is characterizing all the disciplines involved within the wide concept of smart cities, becomes a key factor to trigger true user-driven innovation. In this context 3D city models will play an increasingly important role in our daily lives and become an essential part of the modern city information infrastructure (Spatial Data Infrastructure). The goal of this paper is to introduce the i-SCOPE (interoperable Smart City services through an Open Platform for urban Ecosystems) project methodology and implementations together with key technologies and open standards. Based on interoperable 3D CityGML UIMs, the aim of i-Scope is to deliver an open platform on top of which it possible to develop, within different domains, various "smart city" services. Moreover, in i-SCOPE different issues, transcending the mere technological domain, are being tackled, including aspects dealing with social and environmental issues. Indeed several tasks including citizen awareness, crowd source and voluntary based data collection as well as privacy issue concerning involved people should be considered.

SOAP based web services and their future role in VO projects

NASA Astrophysics Data System (ADS)

Topf, F.; Jacquey, C.; Génot, V.; Cecconi, B.; André, N.; Zhang, T. L.; Kallio, E.; Lammer, H.; Facsko, G.; Stöckler, R.; Khodachenko, M.

2011-10-01

Modern state-of-the-art web services are from crucial importance for the interoperability of different VO tools existing in the planetary community. SOAP based web services assure the interconnectability between different data sources and tools by providing a common protocol for communication. This paper will point out a best practice approach with the Automated Multi-Dataset Analysis Tool (AMDA) developed by CDPP, Toulouse and the provision of VEX/MAG data from a remote database located at IWF, Graz. Furthermore a new FP7 project IMPEx will be introduced with a potential usage example of AMDA web services in conjunction with simulation models.

An Intelligent Man-Machine Interface—Multi-Robot Control Adapted for Task Engagement Based on Single-Trial Detectability of P300

PubMed Central

Kirchner, Elsa A.; Kim, Su K.; Tabie, Marc; Wöhrle, Hendrik; Maurus, Michael; Kirchner, Frank

2016-01-01

Advanced man-machine interfaces (MMIs) are being developed for teleoperating robots at remote and hardly accessible places. Such MMIs make use of a virtual environment and can therefore make the operator immerse him-/herself into the environment of the robot. In this paper, we present our developed MMI for multi-robot control. Our MMI can adapt to changes in task load and task engagement online. Applying our approach of embedded Brain Reading we improve user support and efficiency of interaction. The level of task engagement was inferred from the single-trial detectability of P300-related brain activity that was naturally evoked during interaction. With our approach no secondary task is needed to measure task load. It is based on research results on the single-stimulus paradigm, distribution of brain resources and its effect on the P300 event-related component. It further considers effects of the modulation caused by a delayed reaction time on the P300 component evoked by complex responses to task-relevant messages. We prove our concept using single-trial based machine learning analysis, analysis of averaged event-related potentials and behavioral analysis. As main results we show (1) a significant improvement of runtime needed to perform the interaction tasks compared to a setting in which all subjects could easily perform the tasks. We show that (2) the single-trial detectability of the event-related potential P300 can be used to measure the changes in task load and task engagement during complex interaction while also being sensitive to the level of experience of the operator and (3) can be used to adapt the MMI individually to the different needs of users without increasing total workload. Our online adaptation of the proposed MMI is based on a continuous supervision of the operator's cognitive resources by means of embedded Brain Reading. Operators with different qualifications or capabilities receive only as many tasks as they can perform to avoid mental overload as well as mental underload. PMID:27445742

Silicon Mach-Zehnder interferometer racetrack microring for sensing

NASA Astrophysics Data System (ADS)

Xiong, Yule; Ye, Winnie N.

2014-03-01

SOI-based microring resonators (MRRs) have attracted extensive attentions as ultra-compact sensors. Recently, a new structure design combining a ring and a Mach-Zehnder interferometer (MZI) was proposed as sensors for biomedical applications, and as modulators for communications applications. In this design, the MZI uses two identical couplers, where one arm is formed by connecting the access waveguide of the couplers, while the other arm is part of the microring. Such a device may have only one major resonance with a high extinction ratio in a very broad wavelength span (quasi-free spectral range, quasi-FSR), which offers a very large measurement range for sensing applications. 2×2 multimode interference (MMI) couplers are used to couple the microring and the bus waveguides as MMI couplers have broader wavelength responses. We present the first experimental demonstration of the MMI-coupled MZI racetrack microrings for sensing applications. Two types of MMI-coupled MZI racetrack microrings are discussed: one with wire waveguides, and the other using slotted waveguides. For the MZI racetrack microring using wire waveguides, we achieve a quasi-FSR of 34.3 nm near the wavelength of 1520 nm. The corresponding major resonance of the MZI racetrack microring demonstrates a high extinction ratio of ~22.4 dB with a full-width-half-maximum (FWHM) of 1.94 nm, and a quality factor Q of ~800. On the other hand, the quasi-FSR of the MZI racetrack microring with slot waveguides is 23.2 nm near the wavelength of 1540 nm; and the extinction ratio of the major resonance is ~24.5 dB with λFWHM=0.82 nm and Q=~1,900. To demonstrate the uses for sensing applications, we measure the resonance shifts corresponding to the concentration change of the ambient aqueous solutions of sucrose. DI water is used as the reference for calibration to avoid any other variations, e.g. temperature change. Experiments show that the sensitivities of the MZI racetrack microring sensors with wire and slot waveguides are 101.7 nm/RIU and 166.7 nm/RIU, respectively.

INcreasing Security and Protection through Infrastructure REsilience: The INSPIRE Project

NASA Astrophysics Data System (ADS)

D'Antonio, Salvatore; Romano, Luigi; Khelil, Abdelmajid; Suri, Neeraj

The INSPIRE project aims at enhancing the European potential in the field of security by ensuring the protection of critical information infrastructures through (a) the identification of their vulnerabilities and (b) the development of innovative techniques for securing networked process control systems. To increase the resilience of such systems INSPIRE will develop traffic engineering algorithms, diagnostic processes and self-reconfigurable architectures along with recovery techniques. Hence, the core idea of the INSPIRE project is to protect critical information infrastructures by appropriately configuring, managing, and securing the communication network which interconnects the distributed control systems. A working prototype will be implemented as a final demonstrator of selected scenarios. Controls/Communication Experts will support project partners in the validation and demonstration activities. INSPIRE will also contribute to standardization process in order to foster multi-operator interoperability and coordinated strategies for securing lifeline systems.