OPTIMIZATION OF MUD HAMMER DRILLING PERFORMANCE--A PROGRAM TO BENCHMARK THE VIABILITY OF ADVANCED MUD HAMMER DRILLING

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arnis Judzis

2004-04-01

This document details the progress to date on the OPTIMIZATION OF MUD HAMMER DRILLING PERFORMANCE--A PROGRAM TO BENCHMARK THE VIABILITY OF ADVANCED MUD HAMMER DRILLING contract for the quarter starting January 2004 through March 2004. The DOE and TerraTek continue to wait for Novatek on the optimization portion of the testing program (they are completely rebuilding their fluid hammer). The latest indication is that the Novatek tool would be ready for retesting only 3Q 2004. Smith International's hammer will be tested in April of 2004 (2Q 2004 report). Accomplishments included the following: (1) TerraTek presented a paper for publication inmore » conjunction with a peer review at the GTI Natural Gas Technologies Conference February 10, 2004. Manuscripts and associated presentation material were delivered on schedule. The paper was entitled ''Mud Hammer Performance Optimization''. (2) Shell Exploration and Production continued to express high interest in the ''cutter impact'' testing program Task 8. Hughes Christensen supplied inserts for this testing program. (3) TerraTek hosted an Industry/DOE planning meeting to finalize a testing program for ''Cutter Impact Testing--Understanding Rock Breakage with Bits'' on February 13, 2004. (4) Formal dialogue with Terralog was initiated. Terralog has recently been awarded a DOE contract to model hammer mechanics with TerraTek as a sub-contractor. (5) Novatek provided the DOE with a schedule to complete their new fluid hammer and test it at TerraTek.« less

Dynamic Analysis of Hammer Mechanism "Twin Hammer" of Impact Wrench

NASA Astrophysics Data System (ADS)

Konečný, M.; Slavík, J.

This paper describes function of the hammer mechanism "Twin hammer" the impact wrench, calculation of dynamic forces exerted on the mechanism and determining the contact pressures between the parts of the mechanism. The modelling of parts was performed in system Pro ENGINEER—standard. The simulation and finding dynamic forces was performed in advanced module Pro ENGINEER—mechanism design and finding contacts pressures in modul Pro ENGENEER—mechanica.

Optimal Control of the Valve Based on Traveling Wave Method in the Water Hammer Process

NASA Astrophysics Data System (ADS)

Cao, H. Z.; Wang, F.; Feng, J. L.; Tan, H. P.

2011-09-01

Valve regulation is an effective method for process control during the water hammer. The principle of d'Alembert traveling wave theory was used in this paper to construct the exact analytical solution of the water hammer, and the optimal speed law of the valve that can reduce the water hammer pressure in the maximum extent was obtained. Combining this law with the valve characteristic curve, the principle corresponding to the valve opening changing with time was obtained, which can be used to guide the process of valve closing and to reduce the water hammer pressure in the maximum extent.

Automatic hammering of nano-patterns on special polymer film by using a vibrating AFM tip

PubMed Central

2012-01-01

Complicated nano-patterns with linewidth less than 18 nm can be automatically hammered by using atomic force microscopy (AFM) tip in tapping mode with high speed. In this study, the special sample was thin poly(styrene-ethylene/butylenes-styrene) (SEBS) block copolymer film with hexagonal spherical microstructures. An ordinary silicon tip was used as a nano-hammer, and the entire hammering process is controlled by a computer program. Experimental results demonstrate that such structure-tailored thin films enable AFM tip hammering to be performed on their surfaces. Both imprinted and embossed nano-patterns can be generated by using a vibrating tip with a larger tapping load and by using a predefined program to control the route of tip movement as it passes over the sample’s surface. Specific details for the fabrication of structure-tailored SEBS film and the theory for auto-hammering patterns were presented in detail. PMID:22889045

Effect of hammer mass on upper extremity joint moments.

PubMed

Balendra, Nilanthy; Langenderfer, Joseph E

2017-04-01

This study used an OpenSim inverse-dynamics musculoskeletal model scaled to subject-specific anthropometrics to calculate three-dimensional intersegmental moments at the shoulder, elbow and wrist while 10 subjects used 1 and 2 lb hammers to drive nails. Motion data were collected via an optoelectronic system and the interaction of the hammer with nails was recorded with a force plate. The larger hammer caused substantial increases (50-150%) in moments, although increases differed by joint, anatomical component, and significance of the effect. Moment increases were greater in cocking and strike/follow-through phases as opposed to swinging and may indicate greater potential for injury. Compared to shoulder, absolute increases in peak moments were smaller for elbow and wrist, but there was a trend toward larger relative increases for distal joints. Shoulder rotation, elbow varus-valgus and pronation-supination, and wrist radial-ulnar deviation and rotation demonstrated large relative moment increases. Trial and phase durations were greater for the larger hammer. Changes in moments and timing indicate greater loads on musculoskeletal tissues for an extended period with the larger hammer. Additionally, greater variability in timing with the larger hammer, particularly for cocking phase, suggests differences in control of the motion. Increased relative moments for distal joints may be particularly important for understanding disorders of the elbow and wrist associated with hammer use. Copyright © 2016 Elsevier Ltd. All rights reserved.

Laboratory and field measurements and evaluations of vibration at the handles of riveting hammers

PubMed Central

McDOWELL, THOMAS W.; WARREN, CHRISTOPHER; WELCOME, DANIEL E.; DONG, REN G.

2015-01-01

The use of riveting hammers can expose workers to harmful levels of hand-transmitted vibration (HTV). As a part of efforts to reduce HTV exposures through tool selection, the primary objective of this study was to evaluate the applicability of a standardized laboratory-based riveting hammer assessment protocol for screening riveting hammers. The second objective was to characterize the vibration emissions of reduced vibration riveting hammers and to make approximations of the HTV exposures of workers operating these tools in actual work tasks. Eight pneumatic riveting hammers were selected for the study. They were first assessed in a laboratory using the standardized method for measuring vibration emissions at the tool handle. The tools were then further assessed under actual working conditions during three aircraft sheet metal riveting tasks. Although the average vibration magnitudes of the riveting hammers measured in the laboratory test were considerably different from those measured in the field study, the rank orders of the tools determined via these tests were fairly consistent, especially for the lower vibration tools. This study identified four tools that consistently exhibited lower frequency-weighted and unweighted accelerations in both the laboratory and workplace evaluations. These observations suggest that the standardized riveting hammer test is acceptable for identifying tools that could be expected to exhibit lower vibrations in workplace environments. However, the large differences between the accelerations measured in the laboratory and field suggest that the standardized laboratory-based tool assessment is not suitable for estimating workplace riveting hammer HTV exposures. Based on the frequency-weighted accelerations measured at the tool handles during the three work tasks, the sheet metal mechanics assigned to these tasks at the studied workplace are unlikely to exceed the daily vibration exposure action value (2.5 m s−2) using any of the evaluated riveting hammers. PMID:22539561

Social anxiety and the ironic effects of positive interviewer feedback.

PubMed

Budnick, Christopher J; Kowal, Marta; Santuzzi, Alecia M

2015-01-01

Positive interviewer feedback should encourage positive experiences and outcomes for interviewees. Yet, positive feedback is inconsistent with socially anxious interviewees' negative self-views. Socially anxious interviewees might experience increased self-focus while attempting to reconcile the inconsistency between their self-perceptions and that feedback. This could interfere with successful interview performance. This study used a 3 (feedback: positive, negative, no) × 2 (social anxiety: high, low) between-subjects design. Undergraduate students (N = 88) completed a measure of dispositional social anxiety. They then engaged in a simulated interview with a White confederate trained to adhere to a standardized script. Interviewees received positive, negative, or no interviewer feedback. Each interview was video recorded to code anxiety displays, impression management tactics, and interview success. Following positive feedback, socially anxious interviewees displayed more anxiety, less assertiveness, and received lower success ratings. Among anxious interviewees, increased self-focus provided an indirect path between positive feedback and lower success. Consistent with self-verification theory, anxious interviewees had poorer interview performance following positive feedback that contradicted their negative self-views. Thus, socially anxious interviewees might be at a disadvantage when interviewing, especially following positive feedback. Implications for interviewees and interviewers are discussed.

CFD Analysis of the Anti-Surge Effects by Water Hammering

NASA Astrophysics Data System (ADS)

Kim, Tae-oh; Jeong, Hyo-min; Chung, Han-shik; Lee, Sin-il; Lee, Kwang-sung

2015-09-01

Water hammering occurs due to the surge effect that comes from operating the pump, sudden stop during the operating due to a blackout and rapid open and close of the valve. By the water hammering of the pipeline and the pump, the valve are damaged. In this paper, transient analysis is conducted by CFD (Computational Fluid Dynamics). The purpose of this paper is to provide the research data about the change of the pressure and flow in the pipe that caused by the water hammering.

Effects of air vessel on water hammer in high-head pumping station

NASA Astrophysics Data System (ADS)

Wang, L.; Wang, F. J.; Zou, Z. C.; Li, X. N.; Zhang, J. C.

2013-12-01

Effects of air vessel on water hammer process in a pumping station with high-head were analyzed by using the characteristics method. The results show that the air vessel volume is the key parameter that determines the protective effect on water hammer pressure. The maximum pressure in the system declines with increasing air vessel volume. For a fixed volume of air vessel, the shape of air vessel and mounting style, such as horizontal or vertical mounting, have little effect on the water hammer. In order to obtain good protection effects, the position of air vessel should be close to the outlet of the pump. Generally, once the volume of air vessel is guaranteed, the water hammer of a entire pipeline is effectively controlled.

Percussion tool

DOEpatents

Reed, Teddy R.

2006-11-28

A percussion tool is described and which includes a housing mounting a tool bit; a reciprocally moveable hammer borne by the housing and which is operable to repeatedly strike the tool bit; and a reciprocally moveable piston enclosed within the hammer and which imparts reciprocal movement to the reciprocally moveable hammer.

OPTIMIZATION OF MUD HAMMER DRILLING PERFORMANCE - A PROGRAM TO BENCHMARK THE VIABILITY OF ADVANCED MUD HAMMER DRILLING

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alan Black; Arnis Judzis

2003-01-01

Progress during current reporting year 2002 by quarter--Progress during Q1 2002: (1) In accordance to Task 7.0 (D. No.2 Technical Publications) TerraTek, NETL, and the Industry Contributors successfully presented a paper detailing Phase 1 testing results at the February 2002 IADC/SPE Drilling Conference, a prestigious venue for presenting DOE and private sector drilling technology advances. The full reference is as follows: IADC/SPE 74540 ''World's First Benchmarking of Drilling Mud Hammer Performance at Depth Conditions'' authored by Gordon A. Tibbitts, TerraTek; Roy C. Long, US Department of Energy, Brian E. Miller, BP America, Inc.; Arnis Judzis, TerraTek; and Alan D. Black,more » TerraTek. Gordon Tibbitts, TerraTek, will presented the well-attended paper in February of 2002. The full text of the Mud Hammer paper was included in the last quarterly report. (2) The Phase 2 project planning meeting (Task 6) was held at ExxonMobil's Houston Greenspoint offices on February 22, 2002. In attendance were representatives from TerraTek, DOE, BP, ExxonMobil, PDVSA, Novatek, and SDS Digger Tools. (3) PDVSA has joined the advisory board to this DOE mud hammer project. PDVSA's commitment of cash and in-kind contributions were reported during the last quarter. (4) Strong Industry support remains for the DOE project. Both Andergauge and Smith Tools have expressed an interest in participating in the ''optimization'' phase of the program. The potential for increased testing with additional Industry cash support was discussed at the planning meeting in February 2002. Progress during Q2 2002: (1) Presentation material was provided to the DOE/NETL project manager (Dr. John Rogers) for the DOE exhibit at the 2002 Offshore Technology Conference. (2) Two meeting at Smith International and one at Andergauge in Houston were held to investigate their interest in joining the Mud Hammer Performance study. (3) SDS Digger Tools (Task 3 Benchmarking participant) apparently has not negotiated a commercial deal with Halliburton on the supply of fluid hammers to the oil and gas business. (4) TerraTek is awaiting progress by Novatek (a DOE contractor) on the redesign and development of their next hammer tool. Their delay will require an extension to TerraTek's contracted program. (5) Smith International has sufficient interest in the program to start engineering and chroming of collars for testing at TerraTek. (6) Shell's Brian Tarr has agreed to join the Industry Advisory Group for the DOE project. The addition of Brian Tarr is welcomed as he has numerous years of experience with the Novatek tool and was involved in the early tests in Europe while with Mobil Oil. (7) Conoco's field trial of the Smith fluid hammer for an application in Vietnam was organized and has contributed to the increased interest in their tool. Progress during Q3 2002: (1) Smith International agreed to participate in the DOE Mud Hammer program. (2) Smith International chromed collars for upcoming benchmark tests at TerraTek, now scheduled for 4Q 2002. (3) ConocoPhillips had a field trial of the Smith fluid hammer offshore Vietnam. The hammer functioned properly, though the well encountered hole conditions and reaming problems. ConocoPhillips plan another field trial as a result. (4) DOE/NETL extended the contract for the fluid hammer program to allow Novatek to ''optimize'' their much delayed tool to 2003 and to allow Smith International to add ''benchmarking'' tests in light of SDS Digger Tools' current financial inability to participate. (5) ConocoPhillips joined the Industry Advisors for the mud hammer program. Progress during Q4 2002: (1) Smith International participated in the DOE Mud Hammer program through full scale benchmarking testing during the week of 4 November 2003. (2) TerraTek acknowledges Smith International, BP America, PDVSA, and ConocoPhillips for cost-sharing the Smith benchmarking tests allowing extension of the contract to add to the benchmarking testing program. (3) Following the benchmark testing of the Smith International hammer, representatives from DOE/NETL, TerraTek, Smith International and PDVSA met at TerraTek in Salt Lake City to review observations, performance and views on the optimization step for 2003. (4) The December 2002 issue of Journal of Petroleum Technology (Society of Petroleum Engineers) highlighted the DOE fluid hammer testing program and reviewed last years paper on the benchmark performance of the SDS Digger and Novatek hammers. (5) TerraTek's Sid Green presented a technical review for DOE/NETL personnel in Morgantown on ''Impact Rock Breakage'' and its importance on improving fluid hammer performance. Much discussion has taken place on the issues surrounding mud hammer performance at depth conditions.« less

Air distribution system with the discharge action in the working cavity of downhole air hammer drills

NASA Astrophysics Data System (ADS)

Timonin, VV; Alekseev, SE; Kokoulin, DI; Kubanychbek, B.

2018-03-01

It is proposed to carry out pre-mine methane drainage using underground degassing holes made by downhole air hammer drills. The features of downhole air drills are described. The downhole air drill layout with the simple-shape striking part is presented with its pluses and minuses. The researchers point at available options to eliminate the shortcomings. The improved layout of the downhole air hammer drill is suggested. The paper ends with the test data on the prototype air hammer drill, its characteristics and trial drilling results.

Apollo 11 Astronaut Neil Armstrong During Lunar Rock Collection Training

NASA Technical Reports Server (NTRS)

1969-01-01

In this photograph, Apollo 11 astronaut Neil A. Armstrong uses a geologist's hammer in selecting rock specimens during a geological field trip to the Quitman Mountains area near the Fort Quitman ruins in far west Texas. Armstrong, alongside astronaut Edwin (Buzz) Aldrin, practiced gathering rock specimens using special lunar geological tools in preparation for the first Lunar landing. Mission was accomplished in July of the same year. Aboard the Marshall Space Fight center (MSFC) developed Saturn V launch vehicle, the Apollo 11 mission launched from The Kennedy Space Center, Florida on July 16, 1969 and safely returned to Earth on July 24, 1969. The 3-man crew aboard the flight consisted of Armstrong, commander; Aldrin, Lunar Module pilot; and a third astronaut Michael Collins, Command Module pilot. Armstrong was the first human to ever stand on the lunar surface, followed by Aldrin, while Collins remained in lunar orbit. The crew collected 47 pounds of lunar surface material which was returned to Earth for analysis. The lunar surface exploration was concluded in 2½ hours.

OPTIMIZATION OF MUD HAMMER DRILLING PERFORMANCE - A PROGRAM TO BENCHMARK THE VIABILITY OF ADVANCED MUD HAMMER DRILLING

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gordon Tibbitts; Arnis Judzis

2002-07-01

This document details the progress to date on the OPTIMIZATION OF MUD HAMMER DRILLING PERFORMANCE -- A PROGRAM TO BENCHMARK THE VIABILITY OF ADVANCED MUD HAMMER DRILLING contract for the quarter starting April 2002 through June 2002. Even though we are awaiting the optimization portion of the testing program, accomplishments include the following: (1) Presentation material was provided to the DOE/NETL project manager (Dr. John Rogers) for the DOE exhibit at the 2002 Offshore Technology Conference. (2) Two meeting at Smith International and one at Andergauge in Houston were held to investigate their interest in joining the Mud Hammer Performancemore » study. (3) SDS Digger Tools (Task 3 Benchmarking participant) apparently has not negotiated a commercial deal with Halliburton on the supply of fluid hammers to the oil and gas business. (4) TerraTek is awaiting progress by Novatek (a DOE contractor) on the redesign and development of their next hammer tool. Their delay will require an extension to TerraTek's contracted program. (5) Smith International has sufficient interest in the program to start engineering and chroming of collars for testing at TerraTek. (6) Shell's Brian Tarr has agreed to join the Industry Advisory Group for the DOE project. The addition of Brian Tarr is welcomed as he has numerous years of experience with the Novatek tool and was involved in the early tests in Europe while with Mobil Oil. (7) Conoco's field trial of the Smith fluid hammer for an application in Vietnam was organized and has contributed to the increased interest in their tool.« less

Break-dance: an unusual cause of hammer syndrome.

PubMed

Schneider, Frédéric; Milesi, Ilaria; Haesler, Erik; Wicky, Stephan; Schnyder, P; Denys, Alban

2002-01-01

We report the case of a young break-dancer presenting with hammer syndrome. This syndrome has been correlated with many professional and recreational activities but this is, to our knowledge, the first description of hammer syndrome caused by break-dancing. The etiology, diagnosis and treatment modalities of this rare syndrome are considered.

75 FR 48941 - Takes of Marine Mammals Incidental to Specified Activities; Piling and Structure Removal in...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-12

... subsistence uses (where relevant), and if the permissible methods of taking and requirements pertaining to the... mouth of Chapman Bay. Pilings would be removed by vibratory hammer extraction methods and structures... day would be removed via vibratory hammer extraction methods. Typically the hammer vibrates for less...

Break-Dance: An Unusual Cause of Hammer Syndrome

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schneider, Frederic; Milesi, Ilaria; Haesler, Erik

2002-08-15

We report the case of a young break-dancer presenting with hammer syndrome. This syndrome has been correlated with many professional and recreational activities but this is, to our knowledge, the first description of hammer syndrome caused by break-dancing. The etiology, diagnosis and treatment modalities of this rare syndrome are considered.

29 CFR 1926.603 - Pile driving equipment.

Code of Federal Regulations, 2012 CFR

2012-07-01

... strength. (4) Stop blocks shall be provided for the leads to prevent the hammer from being raised against the head block. (5) A blocking device, capable of safely supporting the weight of the hammer, shall be... hammer. (6) Guards shall be provided across the top of the head block to prevent the cable from jumping...

29 CFR 1926.603 - Pile driving equipment.

Code of Federal Regulations, 2013 CFR

2013-07-01

... strength. (4) Stop blocks shall be provided for the leads to prevent the hammer from being raised against the head block. (5) A blocking device, capable of safely supporting the weight of the hammer, shall be... hammer. (6) Guards shall be provided across the top of the head block to prevent the cable from jumping...

29 CFR 1926.603 - Pile driving equipment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... strength. (4) Stop blocks shall be provided for the leads to prevent the hammer from being raised against the head block. (5) A blocking device, capable of safely supporting the weight of the hammer, shall be... hammer. (6) Guards shall be provided across the top of the head block to prevent the cable from jumping...

29 CFR 1926.603 - Pile driving equipment.

Code of Federal Regulations, 2011 CFR

2011-07-01

... strength. (4) Stop blocks shall be provided for the leads to prevent the hammer from being raised against the head block. (5) A blocking device, capable of safely supporting the weight of the hammer, shall be... hammer. (6) Guards shall be provided across the top of the head block to prevent the cable from jumping...

29 CFR 1926.603 - Pile driving equipment.

Code of Federal Regulations, 2014 CFR

2014-07-01

... strength. (4) Stop blocks shall be provided for the leads to prevent the hammer from being raised against the head block. (5) A blocking device, capable of safely supporting the weight of the hammer, shall be... hammer. (6) Guards shall be provided across the top of the head block to prevent the cable from jumping...

Development of a Piezoelectric Rotary Hammer Drill

NASA Technical Reports Server (NTRS)

Domm, Lukas N.

2011-01-01

The Piezoelectric Rotary Hammer Drill is designed to core through rock using a combination of rotation and high frequency hammering powered by a single piezoelectric actuator. It is designed as a low axial preload, low mass, and low power device for sample acquisition on future missions to extraterrestrial bodies. The purpose of this internship is to develop and test a prototype of the Piezoelectric Rotary Hammer Drill in order to verify the use of a horn with helical or angled cuts as a hammering and torque inducing mechanism. Through an iterative design process using models in ANSYS Finite Element software and a Mason's Equivalent Circuit model in MATLAB, a horn design was chosen for fabrication based on the predicted horn tip motion, electromechanical coupling, and neutral plane location. The design was then machined and a test bed assembled. The completed prototype has proven that a single piezoelectric actuator can be used to produce both rotation and hammering in a drill string through the use of a torque inducing horn. Final data results include bit rotation produced versus input power, and best drilling rate achieved with the prototype.

Screening reactor steam/water piping systems for water hammer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Griffith, P.

1997-09-01

A steam/water system possessing a certain combination of thermal, hydraulic and operational states, can, in certain geometries, lead to a steam bubble collapse induced water hammer. These states, operations, and geometries are identified. A procedure that can be used for identifying whether an unbuilt reactor system is prone to water hammer is proposed. For the most common water hammer, steam bubble collapse induced water hammer, six conditions must be met in order for one to occur. These are: (1) the pipe must be almost horizontal; (2) the subcooling must be greater than 20 C; (3) the L/D must be greatermore » than 24; (4) the velocity must be low enough so that the pipe does not run full, i.e., the Froude number must be less than one; (5) there should be void nearby; (6) the pressure must be high enough so that significant damage occurs, that is the pressure should be above 10 atmospheres. Recommendations on how to avoid this kind of water hammer in both the design and the operation of the reactor system are made.« less

Hammered Dulcimer

NASA Astrophysics Data System (ADS)

Peterson, David

The hammered dulcimer, a direct ancestor of the clavichord and the pianoforte, is a folk instrument that developed from eleventh-century antecedents such as the psaltery. They are trapezoidal in shape, with a long base of 40-45 in. and height of 15-18 in. Two bridges, treble and bass, each support 11-16 courses of strings, which are struck with light wooden hammers. The treble bridge divides the strings into a musical fifth, which facilitates the fast playing of diatonic melodies. Historically, the instrument was used as a rhythmic back-up for fiddles and other lead instruments, but since being popularized in the 1970s folk revival, it has become a solo or lead instrument in ensembles. The hammered dulcimer shares many acoustic properties with the piano except that the dulcimer is smaller and undamped, and the lighter, harder hammers give a more percussive sound. A hammered dulcimer player can also play double strokes and can alter instrument timbre by changing strike location. Current instruments are lightweight, 13-30 lb, and reasonably stable, but temperature and humidity changes cause tuning problems which are related to the linear scaling that is intrinsic to the trapezoidal design.

41 CFR 301-75.100 - Must we pay all of the interviewee's pre-employment interview travel expenses?

Code of Federal Regulations, 2010 CFR

2010-07-01

... interviewee's pre-employment interview travel expenses? 301-75.100 Section 301-75.100 Public Contracts and... RESPONSIBILITIES 75-PRE-EMPLOYMENT INTERVIEW TRAVEL Travel Expenses § 301-75.100 Must we pay all of the interviewee's pre-employment interview travel expenses? If you decide to pay the interviewee per diem or common...

41 CFR 301-75.205 - Is the interviewee required to submit a travel claim to us?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 4 2010-07-01 2010-07-01 false Is the interviewee required to submit a travel claim to us? 301-75.205 Section 301-75.205 Public Contracts and Property... the interviewee required to submit a travel claim to us? No. Only if the interviewee wants to be...

41 CFR 301-75.205 - Is the interviewee required to submit a travel claim to us?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 41 Public Contracts and Property Management 4 2011-07-01 2011-07-01 false Is the interviewee required to submit a travel claim to us? 301-75.205 Section 301-75.205 Public Contracts and Property... the interviewee required to submit a travel claim to us? No. Only if the interviewee wants to be...

Pump-stopping water hammer simulation based on RELAP5

NASA Astrophysics Data System (ADS)

Yi, W. S.; Jiang, J.; Li, D. D.; Lan, G.; Zhao, Z.

2013-12-01

RELAP5 was originally designed to analyze complex thermal-hydraulic interactions that occur during either postulated large or small loss-of-coolant accidents in PWRs. However, as development continued, the code was expanded to include many of the transient scenarios that might occur in thermal-hydraulic systems. The fast deceleration of the liquid results in high pressure surges, thus the kinetic energy is transformed into the potential energy, which leads to the temporary pressure increase. This phenomenon is called water hammer. Generally water hammer can occur in any thermal-hydraulic systems and it is extremely dangerous for the system when the pressure surges become considerably high. If this happens and when the pressure exceeds the critical pressure that the pipe or the fittings along the pipeline can burden, it will result in the failure of the whole pipeline integrity. The purpose of this article is to introduce the RELAP5 to the simulation and analysis of water hammer situations. Based on the knowledge of the RELAP5 code manuals and some relative documents, the authors utilize RELAP5 to set up an example of water-supply system via an impeller pump to simulate the phenomena of the pump-stopping water hammer. By the simulation of the sample case and the subsequent analysis of the results that the code has provided, we can have a better understand of the knowledge of water hammer as well as the quality of the RELAP5 code when it's used in the water-hammer fields. In the meantime, By comparing the results of the RELAP5 based model with that of other fluid-transient analysis software say, PIPENET. The authors make some conclusions about the peculiarity of RELAP5 when transplanted into water-hammer research and offer several modelling tips when use the code to simulate a water-hammer related case.

OPTIMIZATION OF MUD HAMMER DRILLING PERFORMANCE--A PROGRAM TO BENCHMARK THE VIABILITY OF ADVANCED MUD HAMMER DRILLING

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arnis Judzis

2004-07-01

This document details the progress to date on the ''OPTIMIZATION OF MUD HAMMER DRILLING PERFORMANCE--A PROGRAM TO BENCHMARK THE VIABILITY OF ADVANCED MUD HAMMER DRILLING'' contract for the quarter starting April 2004 through June 2004. The DOE and TerraTek continue to wait for Novatek on the optimization portion of the testing program (they are completely rebuilding their fluid hammer). The latest indication is that the Novatek tool would be ready for retesting only 4Q 2004 or later. Smith International's hammer was tested in April of 2004 (2Q 2004 report). Accomplishments included the following: (1) TerraTek re-tested the ''optimized'' fluid hammermore » provided by Smith International during April 2004. Many improvements in mud hammer rates of penetration were noted over Phase 1 benchmark testing from November 2002. (2) Shell Exploration and Production in The Hague was briefed on various drilling performance projects including Task 8 ''Cutter Impact Testing''. Shell interest and willingness to assist in the test matrix as an Industry Advisor is appreciated. (3) TerraTek participated in a DOE/NETL Review meeting at Morgantown on April 15, 2004. The discussions were very helpful and a program related to the Mud Hammer optimization project was noted--Terralog modeling work on percussion tools. (4) Terralog's Dr. Gang Han witnessed some of the full-scale optimization testing of the Smith International hammer in order to familiarize him with downhole tools. TerraTek recommends that modeling first start with single cutters/inserts and progress in complexity. (5) The final equipment problem on the impact testing task was resolved through the acquisition of a high data rate laser based displacement instrument. (6) TerraTek provided Novatek much engineering support for the future re-testing of their optimized tool. Work was conducted on slip ring [electrical] specifications and tool collar sealing in the testing vessel with a reconfigured flow system on Novatek's collar.« less

Infrasound Generation from the HH Seismic Hammer.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, Kyle Richard

2014-10-01

The HH Seismic hammer is a large, "weight-drop" source for active source seismic experiments. This system provides a repetitive source that can be stacked for subsurface imaging and exploration studies. Although the seismic hammer was designed for seismological studies it was surmised that it might produce energy in the infrasonic frequency range due to the ground motion generated by the 13 metric ton drop mass. This study demonstrates that the seismic hammer generates a consistent acoustic source that could be used for in-situ sensor characterization, array evaluation and surface-air coupling studies for source characterization.

Development and validation of a method to directly measure the cable force during the hammer throw.

PubMed

Brice, Sara M; Ness, Kevin F; Rosemond, Doug; Lyons, Keith; Davis, Mark

2008-05-01

The development of cable force during hammer-throw turns is crucial to the throw distance. In this paper, we present a method that is capable of measuring cable force in real time and, as it does not interfere with technique, it is capable of providing immediate feedback to coaches and athletes during training. A strain gauge was mounted on the wires of three hammers to measure the tension in the wire and an elite male hammer thrower executed three throws with each hammer. The output from the gauges was recorded by a data logger positioned on the lower back of the thrower. The throws were captured by three high-speed video cameras and the three-dimensional position of the hammer's head was determined by digitizing the images manually. The five best throws were analysed. The force acting on the hammer's head was calculated from Newton's second law of motion and this was compared with the force measured via the strain gauge. Qualitatively the time dependence of the two forces was essentially the same, although the measured force showed more detail in the troughs of the force-time curves. Quantitatively the average difference between the measured and calculated forces over the five throws was 76 N, which corresponds to a difference of 3.8% for a cable force of 2000 N.

STUDY ON OPERATING CHARACTERISTECS OF WATER HAMMER GENERATING DEVICE FOR TREATMENT OF MICROORGANISM

NASA Astrophysics Data System (ADS)

Hamada, Tatsuhisa; Endo, Shigekatsu; Oda, Akira; Shimizu, Yasushi

The phenomenon that has been actualized due to the water quality deterioration because of the inflow of drainage and the industrial wastewater includes the phenomenon that is called water-bloom generated in the freshwater environment made a eutrophic. This is becoming a serious problem to secure the water.Mixing with the drinking water has already been confirmed, and the generation of water-bloom is becoming a big social problem, and fundamental measures have not been established yet.On the other hand, authors are proving the pressure to be a fast the pressure speed of the impact pressure by the water hammer and effective in the destruction of the blue-green algae.In this studies, the hydraulics flow characteristics of an effective water hammer pressure generator to the shredding of the water-bloom cell were examined.As a result, there was a boundary in the region where the water hammer was generated by length and the water supply head of conduit, and the water hammer pressure was able to be understood to be influenced according to the angle of the valve that generated the water hammer in addition in the water hammer generator.The demonstration in the locale was confirmed based on these and the scale etc. of an effective device to the doing water-bloom processing were able to be confirmed by continuous running.

Design of a water-powered DTH hammer for deep drilling application

NASA Astrophysics Data System (ADS)

Cho, Min Jae; Kim, Donguk; Oh, Joo Young; Yook, Se-Jin; Kim, Young Won

2017-11-01

A DTH (Down-the-hole) hammer powered by highly pressurized fluid is a drilling tool using the motion of percussion of a drill bit. In retrospect, a DTH by using compressed air as a power source has been widely used in drilling industries such as applications of mining, geothermal etc. On the other hand, another type of a DTH that uses pressurized water, called a water hammer, has recently seen deep drilling applications, while it has been rarely investigated. In this study, we designed a water-powered DTH hammer which mainly consists of several components such as a piston, a poppet valve, a cap and a bit for deep drilling applications. We optimized the components of the hammer on the basis of the results of 1D analysis using commercial software of AMESIM. An experimental study has been also conducted to investigate a performance of the designed water hammer. We measured a pressure distribution inside the hammer system as a function of time, and it thus estimates a frequency of impaction of the bit, which has been also analyzed in frequency domain. In addition, some important parameters have been discussed in conjunction with a limitation of impaction frequency as input pressure. We believe that this study provides design rules of a water-based DTH for deep drilling applications. This work is supported by KITECH of Korean government.

When Does Tool Use Become Distinctively Human? Hammering in Young Children

ERIC Educational Resources Information Center

Kahrs, Björn Alexander; Jung, Wendy P.; Lockman, Jeffrey J.

2014-01-01

This study examines the development of hammering within an ontogenetic and evolutionary framework using motion-capture technology. Twenty-four right-handed toddlers (19-35 months) wore reflective markers while hammering a peg into a peg-board. The study focuses on the motor characteristics that make tool use uniquely human: wrist involvement,…

Simulation of low pressure water hammer

NASA Astrophysics Data System (ADS)

Himr, D.; Habán, V.

2010-08-01

Numerical solution of water hammer is presented in this paper. The contribution is focused on water hammer in the area of low pressure, which is completely different than high pressure case. Little volume of air and influence of the pipe are assumed in water, which cause sound speed change due to pressure alterations. Computation is compared with experimental measurement.

The Hammer-and-Nail Phenomenon in Mathematics Education

ERIC Educational Resources Information Center

Lim, Kien H.

2012-01-01

This paper uses the hammer-and-nail metaphor to highlight the rigidity and impulsiveness that can be found in student mathematical behaviour. The hammer-and-nail phenomenon can be attributed to two plausible causes: (1) the way the human mind works; and (2) the way mathematics is traditionally taught in school. In this paper, the following aspects…

Theoretical analysis and design of hydro-hammer with a jet actuator: An engineering application to improve the penetration rate of directional well drilling in hard rock formations.

PubMed

He, Jiang-Fu; Liang, Yun-Pei; Li, Li-Jia; Luo, Yong-Jiang

2018-01-01

Rapid horizontal directional well drilling in hard or fractured formations requires efficient drilling technology. The penetration rate of conventional hard rock drilling technology in horizontal directional well excavations is relatively low, resulting in multiple overgrinding of drill cuttings in bottom boreholes. Conventional drilling techniques with reamer or diamond drill bit face difficulties due to the long construction periods, low penetration rates, and high engineering costs in the directional well drilling of hard rock. To improve the impact energy and penetration rate of directional well drilling in hard formations, a new drilling system with a percussive and rotary drilling technology has been proposed, and a hydro-hammer with a jet actuator has also been theoretically designed on the basis of the impulse hydro-turbine pressure model. In addition, the performance parameters of the hydro-hammer with a jet actuator have been numerically and experimentally analyzed, and the influence of impact stroke and pumped flow rate on the motion velocity and impact energy of the hydro-hammer has been obtained. Moreover, the designed hydro-hammer with a jet actuator has been applied to hard rock drilling in a trenchless drilling program. The motion velocity of the hydro-hammer ranges from 1.2 m/s to 3.19 m/s with diverse flow rates and impact strokes, and the motion frequency ranges from 10 Hz to 22 Hz. Moreover, the maximum impact energy of the hydro-hammer is 407 J, and the pumped flow rate is 2.3 m3/min. Thus, the average penetration rate of the optimized hydro-hammer improves by over 30% compared to conventional directional drilling in hard rock formations.

Theoretical analysis and design of hydro-hammer with a jet actuator: An engineering application to improve the penetration rate of directional well drilling in hard rock formations

PubMed Central

He, Jiang-fu; Li, Li-jia; Luo, Yong-jiang

2018-01-01

Rapid horizontal directional well drilling in hard or fractured formations requires efficient drilling technology. The penetration rate of conventional hard rock drilling technology in horizontal directional well excavations is relatively low, resulting in multiple overgrinding of drill cuttings in bottom boreholes. Conventional drilling techniques with reamer or diamond drill bit face difficulties due to the long construction periods, low penetration rates, and high engineering costs in the directional well drilling of hard rock. To improve the impact energy and penetration rate of directional well drilling in hard formations, a new drilling system with a percussive and rotary drilling technology has been proposed, and a hydro-hammer with a jet actuator has also been theoretically designed on the basis of the impulse hydro-turbine pressure model. In addition, the performance parameters of the hydro-hammer with a jet actuator have been numerically and experimentally analyzed, and the influence of impact stroke and pumped flow rate on the motion velocity and impact energy of the hydro-hammer has been obtained. Moreover, the designed hydro-hammer with a jet actuator has been applied to hard rock drilling in a trenchless drilling program. The motion velocity of the hydro-hammer ranges from 1.2 m/s to 3.19 m/s with diverse flow rates and impact strokes, and the motion frequency ranges from 10 Hz to 22 Hz. Moreover, the maximum impact energy of the hydro-hammer is 407 J, and the pumped flow rate is 2.3 m3/min. Thus, the average penetration rate of the optimized hydro-hammer improves by over 30% compared to conventional directional drilling in hard rock formations. PMID:29768421

Study on the Effect of the Impact Location and the Type of Hammer Tip on the Frequency Response Function (FRF) in Experimental Modal Analysis of Rectangular Plates

NASA Astrophysics Data System (ADS)

Mali, K. D.; Singru, P. M.

2018-03-01

In this work effect of the impact location and the type of hammer tip on the frequency response function (FRF) is studied. Experimental modal analysis of rectangular plates is carried out for this purpose by using impact hammer, accelerometer and fast Fourier transform (FFT) analyzer. It is observed that the impulse hammer hit location has, no effect on the eigenfrequency, yet a difference in amplitude of the eigenfrequencies is obtained. The effect of the hammer tip on the pulse and the force spectrum is studied for three types of tips metal, plastic and rubber. A solid rectangular plate was excited by using these tips one by one in three different tests. It is observed that for present experimental set up plastic tip excites the useful frequency range.

Voice Coil Percussive Mechanism Concept for Hammer Drill

NASA Technical Reports Server (NTRS)

Okon, Avi

2009-01-01

A hammer drill design of a voice coil linear actuator, spring, linear bearings, and a hammer head was proposed. The voice coil actuator moves the hammer head to produce impact to the end of the drill bit. The spring is used to store energy on the retraction and to capture the rebound energy after each impact for use in the next impact. The maximum actuator stroke is 20 mm with the hammer mass being 200 grams. This unit can create impact energy of 0.4 J with 0.8 J being the maximum. This mechanism is less complex than previous devices meant for the same task, so it has less mass and less volume. Its impact rate and energy are easily tunable without changing major hardware components. The drill can be driven by two half-bridges. Heat is removed from the voice coil via CO2 conduction.

The Particle Distribution in Liquid Metal with Ceramic Particles Mould Filling Process

NASA Astrophysics Data System (ADS)

Dong, Qi; Xing, Shu-ming

2017-09-01

Adding ceramic particles in the plate hammer is an effective method to increase the wear resistance of the hammer. The liquid phase method is based on the “with the flow of mixed liquid forging composite preparation of ZTA ceramic particle reinforced high chromium cast iron hammer. Preparation method for this system is using CFD simulation analysis the particles distribution of flow mixing and filling process. Taking the 30% volume fraction of ZTA ceramic composite of high chromium cast iron hammer as example, by changing the speed of liquid metal viscosity to control and make reasonable predictions of particles distribution before solidification.

WATER HAMMER OSCILLATIONS IN THE IRRIGATION FACILITIES

NASA Astrophysics Data System (ADS)

Kurata, Kouichi; Sasaki, Katsuhito; Makihata, Toshiaki

In case a gate installed at the end of discharge conduit is vibrating during discharge, or an air valve is vibrating during water-filling operation into the conduit pipe between main gate and auxiliary gate, and vibration period tv is larger than tc (water hammer propagation time) that is equivalent to the phenomenon of slow closure, there is a possibility that water hammer oscillation in the discharge conduit could be induced. In this paper, by using two case examples, vibration phenomena transmitted to each part are analyzed, on the basis of water pressure fluctuation and pressure wave propagation due to occurrence of water hammer oscillation.

Reconstruction of piano hammer force from string velocity.

PubMed

Chaigne, Antoine

2016-11-01

A method is presented for reconstructing piano hammer forces through appropriate filtering of the measured string velocity. The filter design is based on the analysis of the pulses generated by the hammer blow and propagating along the string. In the five lowest octaves, the hammer force is reconstructed by considering two waves only: the incoming wave from the hammer and its first reflection at the front end. For the higher notes, four- or eight-wave schemes must be considered. The theory is validated on simulated string velocities by comparing imposed and reconstructed forces. The simulations are based on a nonlinear damped stiff string model previously developed by Chabassier, Chaigne, and Joly [J. Acoust. Soc. Am. 134(1), 648-665 (2013)]. The influence of absorption, dispersion, and amplitude of the string waves on the quality of the reconstruction is discussed. Finally, the method is applied to real piano strings. The measured string velocity is compared to the simulated velocity excited by the reconstructed force, showing a high degree of accuracy. A number of simulations are compared to simulated strings excited by a force derived from measurements of mass and acceleration of the hammer head. One application to an historic piano is also presented.

Understanding the effect of hammering process on the vibration characteristics of cymbals

NASA Astrophysics Data System (ADS)

Kuratani, F.; Yoshida, T.; Koide, T.; Mizuta, T.; Osamura, K.

2016-09-01

Cymbals are thin domed plates used as percussion instruments. When cymbals are struck, they vibrate and radiate sound. Cymbals are made through spin forming, hammering, and lathing. The spin forming creates the basic shape of the cymbal, which determines its basic vibration characteristics. The hammering and lathing produce specific sound adjustments by changing the cymbal's vibration characteristics. In this study, we study how hammering cymbals affects their vibration characteristics. The hammering produces plastic deformation (small, shallow dents) on the cymbal's surface, generating residual stresses throughout it. These residual stresses change the vibration characteristics. We perform finite element analysis of a cymbal to obtain its stress distribution and the resulting change in vibration characteristics. To reproduce the stress distribution, we use thermal stress analysis, and then with this stress distribution we perform vibration analysis. These results show that each of the cymbal's modes has a different sensitivity to the thermal load (i.e., hammering). This difference causes changes in the frequency response and the deflection shape that significantly improves the sound radiation efficiency. In addition, we explain the changes in natural frequencies by the stress and modal strain energy distributions.

Numerical and in-situ investigations of water hammer effects in Drava river Kaplan turbine hydropower plants

NASA Astrophysics Data System (ADS)

Bergant, A.; Gregorc, B.; Gale, J.

2012-11-01

This paper deals with critical flow regimes that may induce unacceptable water hammer in Kaplan turbine hydropower plants. Water hammer analysis should be performed for normal, emergency and catastrophic operating conditions. Hydropower plants with Kaplan turbines are usually comprised of relatively short inlet and outlet conduits. The rigid water hammer theory can be used for this case. For hydropower plants with long penstocks the elastic water hammer should be used. Some Kaplan turbine units are installed in systems with long open channels. In this case, water level oscillations in the channels should be carefully investigated. Computational results are compared with results of measurements in recently rehabilitated seven Drava river hydroelectric power plants in Slovenia. Water hammer in the six power plants is controlled by appropriate adjustment of the wicket gates and runner blades closing/opening manoeuvres. Due to very long inflow and outflow open channels in Zlatoličje HPP a special vaned pressure regulating device attenuates extreme pressures in Kaplan turbine flow-passage system and controls unsteady flow in both open channels. Comparisons of results include normal operating regimes. The agreement between computed and measured results is reasonable.

Propellant Flow Actuated Piezoelectric Igniter for Combustion Engines

NASA Technical Reports Server (NTRS)

Wollen, Mark A. (Inventor)

2015-01-01

A propellant flow actuated piezoelectric igniter device using one or more hammer balls retained by one or more magnets, or other retaining method, until sufficient fluid pressure is achieved to release and accelerate the hammer ball, such that it impacts a piezoelectric crystal to produce an ignition spark. Certain preferred embodiments provide a means for repetitively capturing and releasing the hammer ball after it impacts one or more piezoelectric crystals, thereby oscillating and producing multiple, repetitive ignition sparks. Furthermore, an embodiment is presented for which oscillation of the hammer ball and repetitive impact to the piezoelectric crystal is maintained without the need for a magnet or other retaining mechanism to achieve this oscillating impact process.

Research on the water hammer protection of the long distance water supply project with the combined action of the air vessel and over-pressure relief valve

NASA Astrophysics Data System (ADS)

Li, D. D.; Jiang, J.; Zhao, Z.; Yi, W. S.; Lan, G.

2013-12-01

We take a concrete pumping station as an example in this paper. Through the calculation of water hammer protection with a specific pumping station water supply project, and the analysis of the principle, mathematical models and boundary conditions of air vessel and over-pressure relief valve we show that the air vessel can protect the water conveyance system and reduce the transient pressure damage due to various causes. Over-pressure relief valve can effectively reduce the water hammer because the water column re-bridge suddenly stops the pump and prevents pipeline burst. The paper indicates that the combination set of air vessel and over-pressure relief valve can greatly reduce the quantity of the air valve and can eliminate the water hammer phenomenon in the pipeline system due to the vaporization and water column separation and re-bridge. The conclusion could provide a reference for the water hammer protection of long-distance water supply system.

Evidence for cultural differences between neighboring chimpanzee communities.

PubMed

Luncz, Lydia V; Mundry, Roger; Boesch, Christophe

2012-05-22

The majority of evidence for cultural behavior in animals has come from comparisons between populations separated by large geographical distances that often inhabit different environments. The difficulty of excluding ecological and genetic variation as potential explanations for observed behaviors has led some researchers to challenge the idea of animal culture. Chimpanzees (Pan troglodytes verus) in the Taï National Park, Côte d'Ivoire, crack Coula edulis nuts using stone and wooden hammers and tree root anvils. In this study, we compare for the first time hammer selection for nut cracking across three neighboring chimpanzee communities that live in the same forest habitat, which reduces the likelihood of ecological variation. Furthermore, the study communities experience frequent dispersal of females at maturity, which eliminates significant genetic variation. We compared key ecological factors, such as hammer availability and nut hardness, between the three neighboring communities and found striking differences in group-specific hammer selection among communities despite similar ecological conditions. Differences were found in the selection of hammer material and hammer size in response to changes in nut resistance over time. Our findings highlight the subtleties of cultural differences in wild chimpanzees and illustrate how cultural knowledge is able to shape behavior, creating differences among neighboring social groups. Copyright © 2012 Elsevier Ltd. All rights reserved.

Optimization of Mud Hammer Drilling Performance--A Program to Benchmark the Viability of Advanced Mud Hammer Drilling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arnis Judzis

2006-03-01

Operators continue to look for ways to improve hard rock drilling performance through emerging technologies. A consortium of Department of Energy, operator and industry participants put together an effort to test and optimize mud driven fluid hammers as one emerging technology that has shown promise to increase penetration rates in hard rock. The thrust of this program has been to test and record the performance of fluid hammers in full scale test conditions including, hard formations at simulated depth, high density/high solids drilling muds, and realistic fluid power levels. This paper details the testing and results of testing two 7more » 3/4 inch diameter mud hammers with 8 1/2 inch hammer bits. A Novatek MHN5 and an SDS Digger FH185 mud hammer were tested with several bit types, with performance being compared to a conventional (IADC Code 537) tricone bit. These tools functionally operated in all of the simulated downhole environments. The performance was in the range of the baseline ticone or better at lower borehole pressures, but at higher borehole pressures the performance was in the lower range or below that of the baseline tricone bit. A new drilling mode was observed, while operating the MHN5 mud hammer. This mode was noticed as the weight on bit (WOB) was in transition from low to high applied load. During this new ''transition drilling mode'', performance was substantially improved and in some cases outperformed the tricone bit. Improvements were noted for the SDS tool while drilling with a more aggressive bit design. Future work includes the optimization of these or the next generation tools for operating in higher density and higher borehole pressure conditions and improving bit design and technology based on the knowledge gained from this test program.« less

Modelling water hammer in viscoelastic pipelines: short brief

NASA Astrophysics Data System (ADS)

Urbanowicz, K.; Firkowski, M.; Zarzycki, Z.

2016-10-01

The model of water hammer in viscoelastic pipelines is analyzed. An appropriate mathematical model of water hammer in polymer pipelines is presented. An additional term has been added to continuity equation to describe the retarded deformation of the pipe wall. The mechanical behavior of viscoelastic material is described by generalized Kelvin-Voigt model. The comparison of numerical simulation and experimental data from well known papers is presented. Short discussion about obtained results are given.

9. VIEW OF 'BLUE STREAK' HAMMER MILL (Prater Pulverizer Co., ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. VIEW OF 'BLUE STREAK' HAMMER MILL (Prater Pulverizer Co., Chicago, Illinois), LOCATED IN THE SOUTHEAST CORNER OF THE BASEMENT, WAS ADDED IN THE EARLY 1930s. THIS WAS THE MILL'S FIRST ELECTRIC-POWERED MACHINERY. THE HAMMER MILL WAS USED TO PULVERIZE OATS, ALFALFA MEAL, AND CORN. Photographer: Louise Taft Cawood, July 1986 - Alexander's Grist Mill, Lock 37 on Ohio & Erie Canal, South of Cleveland, Valley View, Cuyahoga County, OH

A Hammer-Impact, Aluminum, Shear-Wave Seismic Source

USGS Publications Warehouse

Haines, Seth

2007-01-01

Near-surface seismic surveys often employ hammer impacts to create seismic energy. Shear-wave surveys using horizontally polarized waves require horizontal hammer impacts against a rigid object (the source) that is coupled to the ground surface. I have designed, built, and tested a source made out of aluminum and equipped with spikes to improve coupling. The source is effective in a variety of settings, and it is relatively simple and inexpensive to build.

Propellant Flow Actuated Piezoelectric Igniter for Combustion Engines

NASA Technical Reports Server (NTRS)

Wollen, Mark A. (Inventor)

2018-01-01

A propellant flow actuated piezoelectric igniter device using one or more hammer balls retained by one or more magnets, or other retaining method, until sufficient fluid pressure is achieved in one or more charging chambers to release and accelerate the hammer ball, such that it impacts a piezoelectric crystal to produce an ignition spark. Certain preferred embodiments provide a means for repetitively capturing and releasing the hammer ball after it impacts one or more piezoelectric crystals, thereby oscillating and producing multiple, repetitive ignition sparks. Furthermore, an embodiment is presented for which oscillation of the hammer ball and repetitive impact to the piezoelectric crystal is maintained without the need for a magnet or other retaining mechanism to achieve this oscillating impact process.

The use of titanium alloys for details of downhole hammers

NASA Astrophysics Data System (ADS)

Popelyukh, A. I.; Repin, A. A.; Alekseev, S. E.; Martyushev, N. V.; Drozdov, Yu Yu

2016-04-01

The influence of cementation technology of titanium alloy Ti-Al-Mn on its wear resistance is studied. It is established that after lubrication a friction pair with mineral oil the wear resistance of the cemented titanium alloy is comparable to wear resistance of the tempered steel 12HN3A, and in water medium surpasses it by 1.5 times. Decrease in the tendency to seizure with steel is the main reason for increase of wear resistance of titanium alloy. Industrial tests of the ASH43 hammer have shown that the use of titanium alloys for the manufacture of hammer strikers allows to increase impact capacity by 1.5 times and to increase drilling rate by 30 % compared to hammers with steel strikers.

OPTIMIZATION OF MUD HAMMER DRILLING PERFORMANCE - A PROGRAM TO BENCHMARK THE VIABILITY OF ADVANCED MUD HAMMER DRILLING

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gordon Tibbitts; Arnis Judzis

2002-04-01

This document details the progress to date on the OPTIMIZATION OF MUD HAMMER DRILLING PERFORMANCE--A PROGRAM TO BENCHMARK THE VIABILITY OF ADVANCED MUD HAMMER DRILLING contract for the quarter starting January 2002 through March 2002. Accomplishments include the following: In accordance to Task 7.0 (D. No.2 Technical Publications) TerraTek, NETL, and the Industry Contributors successfully presented a paper detailing Phase 1 testing results at the February 2002 IADC/SPE Drilling Conference, a prestigious venue for presenting DOE and private sector drilling technology advances. The full reference is as follows: (1) IADC/SPE 74540 ''World's First Benchmarking of Drilling Mud Hammer Performance atmore » Depth Conditions'' authored by Gordon A. Tibbitts, TerraTek; Roy C. Long, US Department of Energy, Brian E. Miller, BP America, Inc.; Arnis Judzis, TerraTek; and Alan D. Black, TerraTek. Gordon Tibbitts, TerraTek, will presented the well-attended paper in February of 2002. The full text of the Mud Hammer paper was included in the last quarterly report. (2) The Phase 2 project planning meeting (Task 6) was held at ExxonMobil's Houston Greenspoint offices on February 22, 2002. In attendance were representatives from TerraTek, DOE, BP, ExxonMobil, PDVSA, Novatek, and SDS Digger Tools. (3) PDVSA has joined the advisory board to this DOE mud hammer project. PDVSA's commitment of cash and in-kind contributions were reported during the last quarter. (4) Strong Industry support remains for the DOE project. Both Andergauge and Smith Tools have expressed an interest in participating in the ''optimization'' phase of the program. The potential for increased testing with additional Industry cash support was discussed at the planning meeting in February 2002.« less

Comparison of Amplitudes and Frequencies of Explosive vs. Hammer Seismic Sources for a 1-km Seismic Line in West Texas

NASA Astrophysics Data System (ADS)

Kaip, G.; Harder, S. H.; Karplus, M. S.; Vennemann, A.

2016-12-01

In May 2016, the National Seismic Source Facility (NSSF) located at the University of Texas at El Paso (UTEP) Department of Geological Sciences collected seismic data at the Indio Ranch located 30 km southwest of Van Horn, Texas. Both hammer on an aluminum plate and explosive sources were used. The project objective was to image subsurface structures at the ranch, owned by UTEP. Selecting the appropriate seismic source is important to reach project objectives. We compare seismic sources between explosions and hammer on plate, focusing on amplitude and frequency. The seismic line was 1 km long, trending WSW to ENE, with 200 4.5 Hz geophones at 5m spacing and shot locations at 10m spacing. Clay slurry was used in shot holes to increase shot coupling around booster. Trojan Spartan cast boosters (150g) were used in explosive sources in each shot hole (1 hole per station). The end of line shots had 5 shot holes instead of 1 (750g total). The hammer source utilized a 5.5 kg hammer and an aluminum plate. Five hammer blows were stacked at each location to improve signal-to-noise ratio. Explosive sources yield higher amplitude, but lower frequency content. The explosions exhibit a higher signal-to-noise ratio, allowing us to recognize seismic energy deeper and farther from the source. Hammer sources yield higher frequencies, allowing better resolution at shallower depths but have a lower signal-to-noise ratio and lower amplitudes, even with source stacking. We analyze the details of the shot spectra from the different types of sources. A combination of source types can improve data resolution and amplitude, thereby improving imaging potential. However, cost, logistics, and complexities also have a large influence on source selection.

Kahn Bani Sa’ad Correctional Facility, Kahn Bani Sa’ad, Iraq

DTIC Science & Technology

2008-07-25

building (Building No. 07/03): 1. Ground floor columns were tested with a Schmidt hammer devise (measures the elastic properties or strength of...3. First floor columns – Schmidt hammer and ultrasonic tests were conducted on all the first floor columns. The test results showed the strength...Building Nos. 07/02 and 07/01): 1. Ground floor columns – Using a Schmidt hammer device, very few columns showed low strength. Further study and

Dizziness in discus throwers is related to motion sickness generated while spinning.

PubMed

Perrin, P; Perrot, C; Deviterne, D; Ragaru, B; Kingma, H

2000-03-01

While both discus and hammer throwing involve rotating movements resulting in the throw of an object, discus throwers sometimes report dizziness, a condition never experienced by hammer throwers. We investigated whether this susceptibility was related to the sensitivity of the thrower or to the type of throwing achieved. For the latter, we compared the determining features of gesture, gaze stabilization and projectile trajectory in both sports. A total of 22 high-level sportsmen in these 2 disciplines, half of them practising both sports, were interviewed. Slow motion video recordings of discus and hammer throwing were examined to determine the visual referential, head movements and plantar surface support area involved at each stage of the motions. Discomfort was reported by 59% of the sportsmen while throwing discus, but by none while throwing hammer. Because several individuals practised both sports, these results exclude the hypothesis of individual susceptibility to dizziness. Video analysis evidenced that during hammer throwing, visual bearings can be used more easily than during discus throwing. Moreover, there is a loss of plantar afferents and generation of head movements liable to induce motion sickness, such as Coriolis acceleration. In conclusion, although hammer and discus-throwing present numerous similarities, we demonstrate here that crucial differences in the specific execution of each sport are responsible for the dizziness experienced by discus throwers.

An Analysis of the Impact of Valve Closure Time on the Course of Water Hammer

NASA Astrophysics Data System (ADS)

Kodura, Apoloniusz

2016-06-01

The knowledge of transient flow in pressure pipelines is very important for the designing and describing of pressure networks. The water hammer is the most common example of transient flow in pressure pipelines. During this phenomenon, the transformation of kinetic energy into pressure energy causes significant changes in pressure, which can lead to serious problems in the management of pressure networks. The phenomenon is very complex, and a large number of different factors influence its course. In the case of a water hammer caused by valve closing, the characteristic of gate closure is one of the most important factors. However, this factor is rarely investigated. In this paper, the results of physical experiments with water hammer in steel and PE pipelines are described and analyzed. For each water hammer, characteristics of pressure change and valve closing were recorded. The measurements were compared with the results of calculations perfomed by common methods used by engineers - Michaud's equation and Wood and Jones's method. The comparison revealed very significant differences between the results of calculations and the results of experiments. In addition, it was shown that, the characteristic of butterfly valve closure has a significant influence on water hammer, which should be taken into account in analyzing this phenomenon. Comparison of the results of experiments with the results of calculations? may lead to new, improved calculation methods and to new methods to describe transient flow.

OPTIMIZATION OF MUD HAMMER DRILLING PERFORMANCE - A PROGRAM TO BENCHMARK THE VIABILITY OF ADVANCED MUD HAMMER DRILLING

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gordon Tibbitts; Arnis Judzis

2001-10-01

This document details the progress to date on the OPTIMIZATION OF MUD HAMMER DRILLING PERFORMANCE -- A PROGRAM TO BENCHMARK THE VIABILITY OF ADVANCED MUD HAMMER DRILLING contract for the quarter starting July 2001 through September 2001. Accomplishments to date include the following: TerraTek highlighted DOE's National Energy Technology Laboratory effort on Mud Hammer Optimization at the recent Annual Conference and Exhibition for the Society of Petroleum Engineers. The original exhibit scheduled by NETL was canceled due to events surrounding the September tragedies in the US. TerraTek has completed analysis of drilling performance (rates of penetration, hydraulics, etc.) for themore » Phase One testing which was completed at the beginning of July. TerraTek jointly with the Industry Advisory Board for this project and DOE/NETL conducted a lessons learned meeting to transfer technology vital for the next series of performance tests. Both hammer suppliers benefited from the testing program and are committed to pursue equipment improvements and ''optimization'' in accordance with the scope of work. An abstract for a proposed publication by the society of Petroleum Engineers/International Association of Drilling Contractors jointly sponsored Drilling Conference was accepted as an alternate paper. Technology transfer is encouraged by the DOE in this program, thus plans are underway to prepare the paper for this prestigious venue.« less

Do chimpanzees use weight to select hammer tools?

PubMed

Schrauf, Cornelia; Call, Josep; Fuwa, Koki; Hirata, Satoshi

2012-01-01

The extent to which tool-using animals take into account relevant task parameters is poorly understood. Nut cracking is one of the most complex forms of tool use, the choice of an adequate hammer being a critical aspect in success. Several properties make a hammer suitable for nut cracking, with weight being a key factor in determining the impact of a strike; in general, the greater the weight the fewer strikes required. This study experimentally investigated whether chimpanzees are able to encode the relevance of weight as a property of hammers to crack open nuts. By presenting chimpanzees with three hammers that differed solely in weight, we assessed their ability to relate the weight of the different tools with their effectiveness and thus select the most effective one(s). Our results show that chimpanzees use weight alone in selecting tools to crack open nuts and that experience clearly affects the subjects' attentiveness to the tool properties that are relevant for the task at hand. Chimpanzees can encode the requirements that a nut-cracking tool should meet (in terms of weight) to be effective.

"When Do I Knock on the Hotel Room Door?": The MLA Conference Job Interview.

ERIC Educational Resources Information Center

Emmerson, Richard K.

1995-01-01

Offers advice to potential interviewees attending an MLA conference. Cautions the interviewee to arrive for the appointment early, but not to knock until the time of the appointment. Advises interviewees to answer questions briefly and to let the committee set the pace of the interview. (PA)

Comparison of Electrostatic Fins with Piezoelectric Impact Hammer Techniques to Extend Impulse Calibration Range of a Torsional Thrust Stand (Preprint)

DTIC Science & Technology

2011-03-23

prac- tical max impulse to 1mNs. The newly developed Piezo - electric Impact Hammer (PIH) calibration system over- comes geometric limits of ESC...the fins to behave as part of an LRC circuit which results in voltage oscillations. By adding a resistor in series between the pulse generator and...series resistor as well as the effects of no loading on the pulse generator. III. PIEZOELECTRIC IMPACT HAMMER SYSTEM The second calibration method tested

[The ethics of ethnography revisited: learning from documentaries].

PubMed

Weber, Florence

2011-01-01

This article offers a comparison of the legal suits filed by the interviewees against the director of the documentary Être et avoir (to have and to be) with the rights of interviewees in ethnographic investigations, focusing particularly on image copyrights and labor law. To say that interviewees contribute to such investigations in anonymity does not solve the main problem - they are crucial to the investigation, marginal to the analysis, and then are assigned no publication credits. While information about the interviewees should remain confidential, this article argues, that contribution and role in the making of a publication should not be ignored.

Experimental Measurements and Mathematical Modeling of Static and Dynamic Characteristics of Water Flow in a Long Pipe

NASA Astrophysics Data System (ADS)

Jablonska, J.; Kozubkova, M.

2017-08-01

Static and dynamic characteristics of flow in technical practice are very important and serious problem and can be solved by experimental measurement or mathematical modeling. Unsteady flow presents time changes of the flow and water hammer can be an example of this phenomenon. Water hammer is caused by rapid changes in the water flow by means the closure or opening of the control valve. The authors deal with by hydraulic hammer at the multiphase flow (water and air), its one-dimensional modeling (Matlab SimHydraulics) and modeling with the use of the finite volume method (Ansys Fluent) in article. The circuit elements are defined by static and dynamic characteristics. The results are verified with measurements. The article evaluates different approaches, their advantages, disadvantages and specifics in solving of water hammer.

HammerCloud: A Stress Testing System for Distributed Analysis

NASA Astrophysics Data System (ADS)

van der Ster, Daniel C.; Elmsheuser, Johannes; Úbeda García, Mario; Paladin, Massimo

2011-12-01

Distributed analysis of LHC data is an I/O-intensive activity which places large demands on the internal network, storage, and local disks at remote computing facilities. Commissioning and maintaining a site to provide an efficient distributed analysis service is therefore a challenge which can be aided by tools to help evaluate a variety of infrastructure designs and configurations. HammerCloud is one such tool; it is a stress testing service which is used by central operations teams, regional coordinators, and local site admins to (a) submit arbitrary number of analysis jobs to a number of sites, (b) maintain at a steady-state a predefined number of jobs running at the sites under test, (c) produce web-based reports summarizing the efficiency and performance of the sites under test, and (d) present a web-interface for historical test results to both evaluate progress and compare sites. HammerCloud was built around the distributed analysis framework Ganga, exploiting its API for grid job management. HammerCloud has been employed by the ATLAS experiment for continuous testing of many sites worldwide, and also during large scale computing challenges such as STEP'09 and UAT'09, where the scale of the tests exceeded 10,000 concurrently running and 1,000,000 total jobs over multi-day periods. In addition, HammerCloud is being adopted by the CMS experiment; the plugin structure of HammerCloud allows the execution of CMS jobs using their official tool (CRAB).

Naive, captive long-tailed macaques (Macaca fascicularis fascicularis) fail to individually and socially learn pound-hammering, a tool-use behaviour

PubMed Central

Tennie, Claudio

2018-01-01

A subspecies of long-tailed macaques (Macaca fascicularis aurea; Mfa) has been reported to use stone tools and a specific technique to process nuts in Southeast Asia, a behaviour known as ‘pound-hammering’. The aim of this study was to examine the development of pound-hammering in long-tailed macaques: whether this behavioural form can be individually learnt or whether it has to rely on some forms of social learning. Given the absence of Mfa from captivity, long-tailed macaques of a highly related subspecies (Macaca fascicularis fascicularis; Mff) were experimentally tested by providing them with the ecological materials necessary to show pound-hammering. A baseline was first carried out to observe whether pound-hammering would emerge spontaneously without social information. As this was not the case, different degrees of social information, culminating in a full demonstration of the behaviour, were provided. None of the subjects (n = 31) showed pound-hammering in any of the individual or social learning conditions. Although these data do not support the hypothesis that individual learning underlies this behaviour, no evidence was found that (at least) Mff learn pound-hammering socially either. We propose that other—potentially interacting—factors may determine whether this behaviour emerges in the various subspecies of long-tailed macaques, and provide a novel methodology to test the role of social and individual learning in the development of animal tool-use. PMID:29892375

Auto-Gopher-II: an autonomous wireline rotary-hammer ultrasonic drill

NASA Astrophysics Data System (ADS)

Badescu, Mircea; Lee, Hyeong Jae; Sherrit, Stewart; Bao, Xiaoqi; Bar-Cohen, Yoseph; Jackson, Shannon; Chesin, Jacob; Zacny, Kris; Paulsen, Gale L.; Mellerowicz, Bolek; Kim, Daniel

2017-04-01

Developing technologies that would enable future NASA exploration missions to penetrate deeper into the subsurface of planetary bodies for sample collection is of great importance. Performing these tasks while using minimal mass/volume systems and with low energy consumption is another set of requirements imposed on such technologies. A deep drill, called Auto-Gopher II, is currently being developed as a joint effort between JPL's NDEAA laboratory and Honeybee Robotics Corp. The Auto-Gopher II is a wireline rotary-hammer drill that combines formation breaking by hammering using an ultrasonic actuator and cuttings removal by rotating a fluted auger bit. The hammering mechanism is based on the Ultrasonic/Sonic Drill/Corer (USDC) mechanism that has been developed as an adaptable tool for many drilling and coring applications. The USDC uses an intermediate free-flying mass to transform high frequency vibrations of a piezoelectric transducer horn tip into sonic hammering of the drill bit. The USDC concept was used in a previous task to develop an Ultrasonic/Sonic Ice Gopher and then integrated into a rotary hammer device to develop the Auto-Gopher-I. The lessons learned from these developments are being integrated into the development of the Auto- Gopher-II, an autonomous deep wireline drill with integrated cuttings and sample management and drive electronics. Subsystems of the wireline drill are being developed in parallel at JPL and Honeybee Robotics Ltd. This paper presents the development efforts of the piezoelectric actuator, cuttings removal and retention flutes and drive electronics.

Identification of characteristic frequencies of damaged railway tracks using field hammer test measurements

NASA Astrophysics Data System (ADS)

Oregui, M.; Li, Z.; Dollevoet, R.

2015-03-01

In this paper, the feasibility of the Frequency Response Function (FRF)-based statistical method to identify the characteristic frequencies of railway track defects is studied. The method compares a damaged track state to a healthy state based on non-destructive field hammer test measurements. First, a study is carried out to investigate the repeatability of hammer tests in railway tracks. By changing the excitation and measurement locations it is shown that the variability introduced by the test process is negligible. Second, following the concepts of control charts employed in process monitoring, a method to define an approximate healthy state is introduced by using hammer test measurements at locations without visual damage. Then, the feasibility study includes an investigation into squats (i.e. a major type of rail surface defect) of varying severity. The identified frequency ranges related to squats agree with those found in an extensively validated vehicle-borne detection system. Therefore, the FRF-based statistical method in combination with the non-destructive hammer test measurements has the potential to be employed to identify the characteristic frequencies of damaged conditions in railway tracks in the frequency range of 300-3000 Hz.

Astronaut David Scott watching hammer and feather fall to lunar surface

NASA Technical Reports Server (NTRS)

1971-01-01

Astronaut David R. Scott, Apollo 15 commander, watches a geological hammer and a feather hit the lunar surface simultaneously in a test of Galileo's law of motion concerning falling bodies, as seen in this color reproduction taken from a transmission made by the RCA color television camera mounted on the Lunar Roving Vehicle. Scott released the hammer from his right hand and the feather from his left at the same instant. This experiment occured toward the end of the third and final lunar surface extravehicular activity.

[On vibration hazards of chipping-hammer operators in an iron foundry. Part 2. Results of the hygienic control].

PubMed

Harada, N; Matsumoto, T; Yamada, S; Kobayashi, F

1982-01-01

We previously reported that the working and health conditions of vibrating tool operators in an iron foundry were investigated in 1975 and vibration hazards were observed to occur frequently in workers operating chipping-hammers powered by compressed air. After that, we instituted medical treatment for the afflicted workers and improvement of working conditions in the foundry, and have performed annual medical examinations for four years. In this paper, the course of hygienic control and the change in the medical findings of twenty-four chipping-hammer operators are reported. 1. The following measures were taken to improve the working conditions of chipping-hammer operators and therapy for patients (Table 1): (1) The operating time of vibrating tools, including chipping-hammer, was limited to two hours per day. The casting process was improved to diminish the flashes that are the objects of chipping-hammer operation. For the purpose of reducing the vibration transmitted to the operator, a servo-arm that has a servomechanism for the chipping-hammer was developed and introduced. (2) Infrared lamps in the foundry and air curtains at the doorway were installed for keeping the chipping-hammer operating area warm. A warm room was set up in the foundry for providing warmth during rest periods and protective clothing against the cold was provided. (3) Workers who displayed health disturbances by medical examinations were treated during the cold season from November to April by periodic visits to the clinic or extended hospitalization, or transferred to job without vibration exposure, according to their stage of disease. Preventive treatment with vasodilator and bubble bath was performed in winter for the chipping-hammer operators. 2. In order to estimate the effect of these countermeasures, annual medical examinations were conducted in March 1975, March 1976, April 1977 and March 1978. Such subjective symptoms as Raynaud's phenomenon, finger numbness, finger listlessness, heavy-headedness, forgetfulness, irritability and hearing disorder showed a tendency for improvement, but other complaints did not (Tables 2-4). The improvement of Raynaud's phenomenon is considered to be due not merely to the countermeasures but also to reducing the chance of provocation and therefore the countermeasures should not be overestimated as a factor of recovery of vibration hazards. Of the functional tests, a tendency for improvement was recognized in sensory functions and peripheral circulatory functions, but not in motor functions (Tables 5, 6). However, the course of recovery was not fast and some advanced cases, especially those using chipping-hammers for more than ten years, showed less improvement after hospital treatment (Table 7, Fig. 1). This indicates the importance of hygienic control which enables vibration hazards patients to have early diagnosis and treatment. Furthermore, in order to eradicate the vibration hazards in the cast metal industry, a drastic reform of the finishing process is considered to be necessary.

Assessment of water pipes durability under pressure surge

NASA Astrophysics Data System (ADS)

Pham Ha, Hai; Minh, Lanh Pham Thi; Tang Van, Lam; Bulgakov, Boris; Bazhenova, Soafia

2017-10-01

Surge phenomenon occurs on the pipeline by the closing valve or pump suddenly lost power. Due to the complexity of the water hammer simulation, previous researches have only considered water hammer on the single pipe or calculation of some positions on water pipe network, it have not been analysis for all of pipe on the water distribution systems. Simulation of water hammer due to closing valve on water distribution system and the influence level of pressure surge is evaluated at the defects on pipe. Water hammer on water supply pipe network are simulated by Water HAMMER software academic version and the capacity of defects are calculated by SINTAP. SINTAP developed from Brite-Euram projects in Brussels-Belgium with the aim to develop a process for assessing the integrity of the structure for the European industry. Based on the principle of mechanical fault, indicating the size of defects in materials affect the load capacity of the product in the course of work, the process has proposed setting up the diagram to fatigue assessment defect (FAD). The methods are applied for water pipe networks of Lien Chieu district, Da Nang city, Viet Nam, the results show the affected area of wave pressure by closing the valve and thereby assess the greatest pressure surge effect to corroded pipe. The SINTAP standard and finite element mesh analysis at the defect during the occurrence of pressure surge which will accurately assess the bearing capacity of the old pipes. This is one of the bases to predict the leakage locations on the water distribution systems. Amount of water hammer when identified on the water supply networks are decreasing due to local losses at the nodes as well as the friction with pipe wall, so this paper adequately simulate water hammer phenomena applying for actual water distribution systems. The research verified that pipe wall with defect is damaged under the pressure surge value.

31. FORGE, ANVIL, POWER FORGE HAMMER (FRONT TO BACK), AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

31. FORGE, ANVIL, POWER FORGE HAMMER (FRONT TO BACK), AND DOORWAY INTO MAIN SHOP-LOOKING SOUTHWEST. - W. A. Young & Sons Foundry & Machine Shop, On Water Street along Monongahela River, Rices Landing, Greene County, PA

5. VIEW OF 20TON STEAMPOWERED FORGE HAMMER Manufactured by Chambersburg ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. VIEW OF 20-TON STEAM-POWERED FORGE HAMMER Manufactured by Chambersburg Engineering Company, Chambersburg, Pennsylvania - Juniata Shops, Blacksmith Shop No. 1, East of Fourth Avenue at Second Street, Altoona, Blair County, PA

The Hammer Award is presented to KSC and 45th Space Wing.

NASA Technical Reports Server (NTRS)

1999-01-01

At a special presentation in the IMAX 2 Theater in the Kennedy Space Center Visitor Complex, KSC and 45th Space Wing employees share the honors as recipients of the Hammer Award. The Hammer Award is Vice President Al Gore's special recognition of teams of federal employees who have made significant contributions in support of the principles of the National Partnership for Reinventing Government. Morley Winograd, director of the National Partnership for Reinventing Government, presented the award to Ed Gormel and Chris Fairey, co-chairs of the Joint Base Operations and Support Contract (J-BOSC) Source Evaluation Board (SEB. This Hammer Award acknowledges the accomplishments of a joint NASA and Air Force team that established the J-BOSC SEB. The team developed and implemented the acquisition strategy for establishing a single set of base operations and support service requirements for KSC, Cape Canaveral Air Station and Patrick Air Force Base.

The Hammer Award is presented to KSC and 45th Space Wing.

NASA Technical Reports Server (NTRS)

1999-01-01

Commander of the Air Force Space Command, General Richard B. Myers (left) joins Ed Gormel (center) and Commander of the 45th Space Wing Brig. Gen. F. Randall Starbuck (right) after the presentation of the Hammer Award. The Hammer Award is Vice President Al Gore's special recognition of teams of federal employees who have made significant contributions in support of the principles of the National Partnership for Reinventing Government. Morley Winograd, director of the National Partnership for Reinventing Government, presented the award to the Joint Base Operations and Support Contract (J-BOSC) Source Evaluation Board (SEB). Gormel is a co-chair of the SEB. This Hammer Award acknowledges the accomplishments of a joint NASA and Air Force team that established the J-BOSC SEB. The team developed and implemented the acquisition strategy for establishing a single set of base operations and support service requirements for KSC, Cape Canaveral Air Station and Patrick Air Force Base.

Ulnar hammer syndrome: a systematic review of the literature.

PubMed

Vartija, Larisa; Cheung, Kevin; Kaur, Manraj; Coroneos, Christopher James; Thoma, Achilleas

2013-11-01

Ulnar hammer syndrome is an uncommon form of arterial insufficiency. Many treatments have been described, and debate continues about the best option. The goal of this systematic review was to determine whether ulnar hammer syndrome has an occupational association, to identify the most reliable diagnostic test, and to determine the best treatment modality. A comprehensive literature search was conducted using the Cochrane Database of Systematic Reviews, the Cochrane Central Register of Controlled Trials, MEDLINE, CINAHL, and EMBASE. Data from articles meeting inclusion criteria were collected in duplicate. Methodological quality of studies was assessed using the Methodological Index for Nonrandomized Studies scale. Thirty studies were included in the systematic review. No randomized controlled trials were identified. There is low-quality evidence suggestive of an association between exposure to repetitive hand trauma and vibration and ulnar hammer syndrome. Various diagnostic investigations were used, but few were compared, making it difficult to determine the most reliable diagnostic test. Numerous nonoperative and operative treatments were reported. With nonoperative treatment, 12 percent had complete resolution and 70 percent had partial resolution of their symptoms. Of patients treated operatively, 42.5 percent had complete resolution and 42.5 percent had partial resolution of their symptoms. The heterogeneity in study design and outcome measures limits definitive conclusions about occupational association, best diagnostic test, and treatment for ulnar hammer syndrome. However, there is low-quality evidence that suggests that most patients with ulnar hammer syndrome will have partial relief of symptoms with nonoperative treatment, and operative treatment results in complete or partial resolution of symptoms in the majority of cases. Therapeutic, IV.

Solenoid hammer valve developed for quick-opening requirements

NASA Technical Reports Server (NTRS)

Wrench, E. H.

1967-01-01

Quick-opening lightweight solenoid hammer valve requires a low amount of electrical energy to open, and closes by the restoring action of the mechanical springs. This design should be applicable to many quick-opening requirements in fluid systems.

Percussive Augmenter of Rotary Drills for Operating as a Rotary-Hammer Drill

NASA Technical Reports Server (NTRS)

Aldrich, Jack Barron (Inventor); Bar-Cohen, Yoseph (Inventor); Sherrit, Stewart (Inventor); Badescu, Mircea (Inventor); Bao, Xiaoqi (Inventor); Scott, James Samson (Inventor)

2014-01-01

A percussive augmenter bit includes a connection shaft for mounting the bit onto a rotary drill. In a first modality, an actuator percussively drives the bit, and an electric slip-ring provides power to the actuator while being rotated by the drill. Hammering action from the actuator and rotation from the drill are applied directly to material being drilled. In a second modality, a percussive augmenter includes an actuator that operates as a hammering mechanism that drives a free mass into the bit creating stress pulses that fracture material that is in contact with the bit.

A Universal Rig for Supporting Large Hammer Drills: Reduced Injury Risk and Improved Productivity

PubMed Central

Rempel, David; Barr, Alan

2015-01-01

Drilling holes into concrete with heavy hammer and rock drills is one of the most physically demanding tasks performed in commercial construction and poses risks for musculoskeletal disorders, noise induced hearing loss, hand arm vibration syndrome and silicosis. The aim of this study was to (1) use a participatory process to develop a rig to support pneumatic rock drills or large electric hammer drills in order to reduce the health risks and (2) evaluate the usability of the rig. Seven prototype rigs for supporting large hammer drills were developed and modified with feedback from commercial contractors and construction workers. The final design was evaluated by laborers and electricians (N=29) who performed their usual concrete drilling with the usual method and the new rig. Subjective regional fatigue was significantly less in the neck, shoulders, hands and arms, and lower back) when using the universal rig compared to the usual manual method. Usability ratings for the rig were significantly better than the usual method on stability, control, drilling, accuracy, and vibration. Drilling time was reduced by approximately 50% with the rig. Commercial construction contractors, laborers and electricians who use large hammer drills for drilling many holes should consider using such a rig to prevent musculoskeletal disorders, fatigue, and silicosis. PMID:26005290

Dynamic Leidenfrost temperature on micro-textured surfaces: Acoustic wave absorption into thin vapor layer

NASA Astrophysics Data System (ADS)

Jerng, Dong Wook; Kim, Dong Eok

2018-01-01

The dynamic Leidenfrost phenomenon is governed by three types of pressure potentials induced via vapor hydrodynamics, liquid dynamic pressure, and the water hammer effect resulting from the generation of acoustic waves at the liquid-vapor interface. The prediction of the Leidenfrost temperature for a dynamic droplet needs quantitative evaluation and definition for each of the pressure fields. In particular, the textures on a heated surface can significantly affect the vapor hydrodynamics and the water hammer pressure. We present a quantitative model for evaluating the water hammer pressure on micro-textured surfaces taking into account the absorption of acoustic waves into the thin vapor layer. The model demonstrates that the strength of the acoustic flow into the liquid droplet, which directly contributes to the water hammer pressure, depends on the magnitude of the acoustic resistance (impedance) in the droplet and the vapor region. In consequence, the micro-textures of the surface and the increased spacing between them reduce the water hammer coefficient ( kh ) defined as the ratio of the acoustic flow into the droplet to total generated flow. Aided by numerical calculations that solve the laminar Navier-Stokes equation for the vapor flow, we also predict the dynamic Leidenfrost temperature on a micro-textured surface with reliable accuracy consistent with the experimental data.

CFD simulation of reverse water-hammer induced by collapse of draft-tube cavity in a model pump-turbine during runaway process

NASA Astrophysics Data System (ADS)

Zhang, Xiaoxi; Cheng, Yongguang; Xia, Linsheng; Yang, Jiandong

2016-11-01

This paper reports the preliminary progress in the CFD simulation of the reverse water-hammer induced by the collapse of a draft-tube cavity in a model pump-turbine during the runaway process. Firstly, the Fluent customized 1D-3D coupling model for hydraulic transients and the Schnerr & Sauer cavitation model for cavity development are introduced. Then, the methods are validated by simulating the benchmark reverse water-hammer in a long pipe caused by a valve instant closure. The simulated head history at the valve agrees well with the measured data in literature. After that, the more complicated reverse water-hammer in the draft-tube of a runaway model pump-turbine, which is installed in a model pumped-storage power plant, is simulated. The dynamic processes of a vapor cavity, from generation, expansion, shrink to collapse, are shown. After the cavity collapsed, a sudden increase of pressure can be evidently observed. The process is featured by a locally expending and collapsing vapor cavity that is around the runner cone, which is different from the conventional recognition of violent water- column separation. This work reveals the possibility for simulating the reverse water-hammer phenomenon in turbines by 3D CFD.

OPTIMIZATION OF MUD HAMMER DRILLING PERFORMANCE - A PROGRAM TO BENCHMARK THE VIABILITY OF ADVANCED MUD HAMMER DRILLING

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gordon Tibbitts; Arnis Judzis

2001-04-01

This document details the progress to date on the OPTIMIZATION OF MUD HAMMER DRILLING PERFORMANCE -- A PROGRAM TO BENCHMARK THE VIABILITY OF ADVANCED MUD HAMMER DRILLING contract for the quarter starting January 2001 through March 2001. Accomplishments to date include the following: (1) On January 9th of 2001, details of the Mud Hammer Drilling Performance Testing Project were presented at a ''kick-off'' meeting held in Morgantown. (2) A preliminary test program was formulated and prepared for presentation at a meeting of the advisory board in Houston on the 8th of February. (3) The meeting was held with the advisorymore » board reviewing the test program in detail. (4) Consensus was achieved and the approved test program was initiated after thorough discussion. (5) This new program outlined the details of the drilling tests as well as scheduling the test program for the weeks of 14th and 21st of May 2001. (6) All the tasks were initiated for a completion to coincide with the test schedule. (7) By the end of March the hardware had been designed and the majority was either being fabricated or completed. (8) The rock was received and cored into cylinders.« less

Reference guide for the soil compactor analyzer.

DOT National Transportation Integrated Search

2009-07-01

The Soil Compactor Analyzer (SCA) attaches to the automatic tamper used for Test Methods Tex-113-E and 114-E and uses rapid sampling of the hammer displacement to measure impact velocity. With the known mass of the hammer and the determined velocity,...

Influence of pin and hammer mill on grinding characteristics, thermal and antioxidant properties of coriander powder.

PubMed

Barnwal, P; Singh, K K; Sharma, Alka; Choudhary, A K; Saxena, S N

2015-12-01

In present study, influence of grinding (hammer and pin mills) and moisture content (range: 6.4-13.6 % dry basis) on the quality traits of coriander powder were investigated. These include grinding parameters, colour parameters, specific heat, thermal conductivity, thermal diffusivity, glass transition temperature, essential oil, total phenolic content, total flavonoid content and DPPH scavenging (%) of coriander powder. For coriander seed, the geometric properties such as major, medium, minor dimensions, geometric mean diameter, arithmetic mean diameter, sphericity, surface area and volume of coriander seeds increased significantly with increasing moisture (6.4-13.6 % db). For coriander powder, the grinding parameters such as average particle size, volume surface mean diameter and volume mean diameter increased significantly with increasing moisture (6.4-13.6 % db). With the grinding method, the colour attributes of coriander powder such as L-value, a-value, b-value, hue angle and browning index varied significantly. It was observed that the specific heat followed second order polynomial relationship with temperature and moisture whereas thermal conductivity varied linearly with temperature and moisture content. The variation of glass transition temperature with moisture can be best represented in quadratic manner. Total flavonoid content (mg QE/g crude seed extract) and DPPH scavenging % activity of coriander powder is significantly affected by grinding methods. A lower value of specific heat was observed for hammer ground coriander powder as compared to pin mill ground coriander powder. The thermal conductivity of hammer mill ground coriander powder was higher as compared to pin mill ground coriander. It was observed that hammer mill yields more fine coriander powder in comparison to pin mill. The browning index was more in hammer mill ground coriander powder.

DE-FOA-EE0005502 Advanced Percussive Drilling Technology for Geothermal Exploration and Development Phase II Report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Su, Jiann-Cherng; Raymond, David W.; Prasad, Somuri V.

Percussive hammers are a promising advance in drilling technology for geothermal since they rely upon rock reduction mechanisms that are well-suited for use in the hard, brittle rock characteristic of geothermal formations. The project research approach and work plan includes a critical path to development of a high-temperature (HT) percussive hammer using a two- phase approach. The work completed in Phase I of the project demonstrated the viability of percussive hammers and that solutions to technical challenges in design, material technology, and performance are likely to be resolved. Work completed in Phase II focused on testing the findings from Phasemore » I and evaluating performance of the materials and designs at high- operating temperatures. A high-operating temperature (HOT) drilling facility was designed, built, and used to test the performance of the DTH under extreme conditions. Results from the testing indicate that a high-temperature capable hammer can be developed and is a viable alternative for user in the driller's toolbox.« less

Advanced Percussive Drilling Technology for Geothermal Exploration and Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Su, Jiann; Raymond, David; Prasad, Somuri

Percussive hammers are a promising advance in drilling technology for geothermal since they rely upon rock reduction mechanisms that are well-suited for use in the hard, brittle rock characteristic of geothermal formations. The project research approach and work plan includes a critical path to development of a high-temperature (HT) percussive hammer using a two phase approach. The work completed in Phase I of the project demonstrated the viability of percussive hammers and that solutions to technical challenges in design, material technology, and performance are likely to be resolved. Work completed in Phase II focused on testing the findings from Phasemore » I and evaluating performance of the materials and designs at high operating temperatures. A high-operating temperature (HOT) drilling facility was designed, built, and used to test the performance of the DTH under extreme conditions. Results from the testing indicate that a high-temperature capable hammer can be developed and is a viable alternative for use in the driller’s toolbox.« less

The effect of cryogenic grinding and hammer milling on the flavour quality of ground pepper (Piper nigrum L.).

PubMed

Liu, Hong; Zeng, Fankui; Wang, Qinghuang; Ou, Shiyi; Tan, Lehe; Gu, Fenglin

2013-12-15

In this study, we compared the effects of cryogenic grinding and hammer milling on the flavour attributes of black, white, and green pepper. The flavour attributes were analysed using headspace solid-phase micro-extraction (HS-SPME) and gas chromatography-mass spectrometry (GC/MS), sensory evaluation and electronic nose (e-nose) analysis. Cryogenic grinding resulted in minimal damage to the colour, flavour, and sensory attributes of the spices. Cryogenic grinding was also better than hammer milling at preserving the main potent aroma constituents, but the concentrations of the main aroma constituents were dramatically reduced after storing the samples at 4 °C for 6 months. Pattern matching performed by the e-nose further supported our sensory and instrumental findings. Overall, cryogenic grinding was superior to hammer milling for preserving the sensory properties and flavour attributes of pepper without significantly affecting its quality. However, we found that the flavour quality of ground pepper was reduced during storage. Copyright © 2013 Elsevier Ltd. All rights reserved.

The Hammer Award is presented to KSC and 45th Space Wing.

NASA Technical Reports Server (NTRS)

1999-01-01

KSC's Director of Public Affairs Joe Gordon (left) applauds as Ed Gormel and Chris Fairey are named recipients of the Hammer Award at a special presentation in the IMAX 2 Theater in the Kennedy Space Center Visitor Complex. Presenting the award is Morley Winograd (at the podium), director of the National Partnership for Reinventing Government. The Hammer Award is Vice President Al Gore's special recognition of teams of federal employees who have made significant contributions in support of the principles of the National Partnership for Reinventing Government. This Hammer Award acknowledges the accomplishments of a joint NASA and Air Force team that established the Joint Base Operations and Support Contract (J-BOSC) Source Evaluation Board (SEB). Gormel and Fairey are co-chairs of the SEB. The team developed and implemented the acquisition strategy for establishing a single set of base operations and support service requirements for KSC, Cape Canaveral Air Station and Patrick Air Force Base.

Impact of industrial hammer mill rotor speed on extraction efficiency and quality of extra virgin olive oil.

PubMed

Polari, Juan J; Garcí-Aguirre, David; Olmo-García, Lucía; Carrasco-Pancorbo, Alegría; Wang, Selina C

2018-03-01

Crushing is a key step during olive oil extraction. Among commercial crushers, the hammer mill is the most widely used due to its robustness and high throughput. In the present work, the impact of hammer mill rotor speed on extraction yield and overall quality of super-high-density Arbosana olive oils were assessed in an industrial facility. Our results show that increasing the rotor speed from 2400rpm to 3600rpm led to a rise in oil yield of 1.2%, while conserving quality parameters. Sensory analysis showed more pungency with increased rotation speed, while others attributes were unaffected. Volatile compounds showed little variation with the differences in crusher speed; however, total phenols content, two relevant secoiridoids, and triterpenoids levels increased with rotor speed. Hammer mill rotor speed is a processing variable that can be tuned to increase the extraction efficiency and modulate the chemical composition of extra virgin olive oil. Copyright © 2017 Elsevier Ltd. All rights reserved.

Habitat for Humanity Project Hammers Home the Importance of Volunteerism | Frederick National Laboratory for Cancer Research

Cancer.gov

BRUNSWICK, Md. -- The staccato sounds of hammers and nail guns replaced the typical morning silence of a recent sunny Saturday in Brunswick, Md., where Frederick National Laboratory volunteers, their guests, and staff from Habitat for Humanity of Fre

21 CFR 890.1450 - Powered reflex hammer.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Powered reflex hammer. 890.1450 Section 890.1450 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES PHYSICAL MEDICINE DEVICES Physical Medicine Diagnostic Devices § 890.1450 Powered reflex...

21 CFR 890.1450 - Powered reflex hammer.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Powered reflex hammer. 890.1450 Section 890.1450 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES PHYSICAL MEDICINE DEVICES Physical Medicine Diagnostic Devices § 890.1450 Powered reflex...

21 CFR 890.1450 - Powered reflex hammer.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Powered reflex hammer. 890.1450 Section 890.1450 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES PHYSICAL MEDICINE DEVICES Physical Medicine Diagnostic Devices § 890.1450 Powered reflex...

21 CFR 890.1450 - Powered reflex hammer.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Powered reflex hammer. 890.1450 Section 890.1450 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES PHYSICAL MEDICINE DEVICES Physical Medicine Diagnostic Devices § 890.1450 Powered reflex...

21 CFR 890.1450 - Powered reflex hammer.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Powered reflex hammer. 890.1450 Section 890.1450 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES PHYSICAL MEDICINE DEVICES Physical Medicine Diagnostic Devices § 890.1450 Powered reflex...

University of Maryland MRSEC - About Us: Committees

Science.gov Websites

; (we call this type of surface a vicinal surface). Modern scanned-probe microscopes, such as the STM Educational Education Pre-College Programs Homeschool Programs Undergraduate & Graduate Programs Teacher -2014 IRG 1 Donna Hammer Hammer, Donna MRSEC Associate Director & Director of Education Outreach

Numerical investigation of soil plugging effect inside sleeve of cast-in-place piles driven by vibratory hammers in clays.

PubMed

Xiao, Yong Jie; Chen, Fu Quan; Dong, Yi Zhi

2016-01-01

During driving sleeve of cast-in-place piles by vibratory hammers, soils were squeezed into sleeve and then soil plugging was formed. The physic-mechanical properties of the soil plug have direct influence on the load transmission between the sleeve wall and soil plug. Nevertheless, the researches on this issue are insufficient. In this study, finite element and infinite element coupling model was introduced, through the commercial code ABAQUS, to simulate the full penetration process of the sleeve driven from the ground surface to the desired depth by applying vibratory hammers. The research results indicated that the cyclic shearing action decreases both in soil shear strength and in granular cementation force when the sleeve is driven by vibratory hammers, which leads to a partially plugged mode of the soil plug inside the sleeve. Accordingly, the penetration resistance of sleeve driven by vibratory hammers is the smallest compared to those by other installation methods. When driving the sleeve, the annular soil arches forming in the soil plug at sleeve end induce a significant rise in the internal shaft resistance. Moreover, the influence of vibration frequencies, sleeve diameters, and soil layer properties on the soil plug was investigated in detail, and at the same time improved formulas were brought forward to describe the soil plug resistance inside vibratory driven sleeve.

Use of impact testing to predict softness, cow preference, and hardening over time of stall bases.

PubMed

Fulwider, W K; Palmer, R W

2004-09-01

The objective of this study was to assess the softness and durability of commercially available free-stall bases, and to determine the relationship of stall base softness to cow preference. Clegg impact values were recorded at the University of Wisconsin-Madison Arlington Agricultural Research Station on June 19, 2002, and again on July 24, 2003. The Clegg Impact Soil Tester (model 95051, Lafayette Instruments, Lafayette, IN) with a 20-kg hammer was used in this study. The impact of the hammer on the free-stall base results in a digital display based on peak deceleration of the hammer's impact with the free-stall base in tens of gravities (CIV/H). The CIV/H value, as measured by the Clegg Impact hammer, is based on peak deceleration of the 20-kg hammer's impact with the surface, from a height of 30 cm. Clegg impact measures were highly correlated with cow preference measurements. This relationship suggests that Clegg impact measures of compressibility were good indicators for predicting stall-base acceptance. A cork mattress, 4 foam mattresses, 4 rubber mattresses, 4 rubber mats, and a waterbed were evaluated in this study. Foam-based mattresses lost cushioning ability faster than rubber mattresses or rubber mats. Clegg impact values increased over the 13-mo time period for most stall base types, which indicated a tendency of stall bases to harden.

Application of air hammer drilling technology in igneous rocks of Junggar basin

NASA Astrophysics Data System (ADS)

Zhao, Hongshan; Feng, Guangtong; Yu, Haiye

2018-03-01

There were many technical problems such as serious well deviation, low penetration rate and long drilling cycle in igneous rocks because of its hardness, strong abrasive and poor drillability, which severely influenced the exploration and development process of Junggar basin. Through analyzing the difficulties of gas drilling with roller bits in Well HS 2, conducting the mechanics experiments about igneous rock, and deeply describing the rock-breaking mechanism of air hammer drilling and its adaptability in igneous rocks, air hammer drilling can realize deviation control and fast drilling in igneous rocks of piedmont zone and avoid the wear and fatigue fracture of drilling strings due to its characteristics of low WOB, low RPM and high frequency impact. Through firstly used in igneous rocks of Well HS 201, compared with gas drilling with cone bit, the average penetration rate and one-trip footage of air hammer drilling respectively increased by more than 2.45 times and 6.42 times while the well deviation was always controlled less than 2 degrees. Two records for Block HS were set up such as the fastest penetration rate of 14.29m/h in Φ444.5mm well hole and the highest one-trip footage of 470.62m in Φ311.2mm well hole. So air hammer drilling was an effective way to realize optimal and fast drilling in the igneous rock formation of Junggar basin.

Comparison of Piezosurgery and Hammer-Chisel in Endoscopic Dacryocystorhinostomy.

PubMed

Çukurova, Ibrahim; Bulğurcu, Suphi; Arslan, Ilker Burak; Dikilitaş, Bünyamin

2018-05-08

In this study, we compared the advantages and disadvantages of piezosurgery and hammer-chisel used in endoscopic dacryocystorhinostomy (EDCR). Between January 2012 and January 2016, 10 women and 8 men in whom piezosurgery was used (group 1) and 11 women and 7 men in whom hammer-chisel was used (group 2) during EDCR operations were compared retrospectively. Recurrence, operation time, postoperative bleeding, and operative cost were evaluated in patients who were followed for an average of 11.8 months. In addition, visual analogue scale (VAS) was used to assess pain at 6 hours postoperatively. No recurrence was observed in group 1, but recurrence was observed in 2 patients in group 2 (P = 0.685). There was no postoperative bleeding in both groups. The mean duration of operation was 30.6 ± 8.2 minutes in group 1 and 46.8 ± 9.5 minutes in group 2 (P = 0.038). The VAS score in group 1 was 2.7 ± 1.4 and the VAS score in group 2 was 5.8 ± 2.2 (P = 0.01). Piezosurgery costs an additional $325 for each patient while the use of the hammer-chisel does not incur additional costs. Piezosurgery causes shorter operation time, less recurrence, and less pain when compared with hammer-chisel.

49 CFR 230.40 - Time and method of staybolt testing.

Code of Federal Regulations, 2010 CFR

2010-10-01

... paragraph (a)(2) of this section. All staybolts also shall be hammer tested under hydrostatic pressure any time hydrostatic pressure above the MAWP specified on the boiler specification form (FRA Form No. 4... of hammer testing. If staybolts are tested while the boiler contains water, the hydrostatic pressure...

DETAIL VIEW OF INTERIOR SHOWING TWO 3,000POUND STEAM HAMMERS, CA. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

DETAIL VIEW OF INTERIOR SHOWING TWO 3,000-POUND STEAM HAMMERS, CA. 1905, CONVERTED TO COMPRESSED AIR 1985 (MANUFACTURED BY CHAMBERSBURG ENGINEERING COMPANY, CHAMBERSBURG, PENNSYLVANIA), LOCATED ON EITHER SIDE OF CAST-IRON CENTRAL SUPPORT COLUMN. - Cambria Iron Company, Blacksmith Shop, Lower Works, Johnstown, Cambria County, PA

75 FR 67951 - Takes of Marine Mammals Incidental to Specified Activities; Piling and Structure Removal in...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-04

...), and if the permissible methods of taking and requirements pertaining to the mitigation, monitoring and... vibratory hammer extraction methods and structures will be removed via cable lifting. In addition... be removed via vibratory hammer extraction methods. Operations will begin on the pilings and...

Use of pile driving analysis for assessment of axial load capacity of piles : [technical summary].

DOT National Transportation Integrated Search

2012-01-01

The dynamic response of a pile during driving is very : complex, involving the interactions of the hammer, cushion, : pile and soil during application of an impact load. : The first analysis aimed at simulating a hammer blow on : a pile was published...

Potential improvement of Schmidt-hammer exposure-age dating (SHD) of moraines in the Southern Alps, New Zealand, by application of the new electronic Schmidt-hammer (SilverSchmidt)

NASA Astrophysics Data System (ADS)

Winkler, Stefan; Corbett, David

2014-05-01

The Southern Alps of New Zealand are among the few key study sites for investigating Holocene glacier chronologies in the mid-latitudinal Southern Hemisphere. Their characteristic highly dynamic geomorphological process systems prove, however, to be a considerable challenge for all attempts to date and palaeoclimatologically interpret the existing Holocene moraines record. As a multi-proxy approach combining 10Be terrestrial cosmogenic nuclide dating (TCND) with Schmidt-hammer testing, the recently developed Schmidt-hammer exposure-age dating (SHD) has already shown its potential in this study area (cf. Winkler 2005, 2009, 2013). An electronic Schmidt-hammer (named SilverSchmidt) was introduced by the manufacturer of the original mechanical Schmidt-hammer (Proceq SA) a few years ago. It offers, in particular, facilities for much easier data processing and constitutes a major improvement and potential replacement for the mechanical Schmidt-hammer. However, its different approach to the measurement of surface hardness - based on Q-(velocity) values instead of R-(rebound) values - is a potential drawback. This difference effectively means that measurements from the two instruments are not easily interconvertible and, hence, that the instruments cannot be used interchangeably without previous comparative tests of both instruments under field conditions. Both instruments used in this comparative study were N-type models with identical impact energy of 2.207 Nm for the plunger. To compare both instruments and explore interconvertibility, parallel measurements were performed on a selected number of boulders (10 boulders per site with 5 impacts each, at least 2 sites per moraine) on moraines of homogeneous lithology but different established ages covering the entire Holocene and the Late Glacial. All moraines are located east of the Main Divide of the Southern Alps at Mueller Glacier, Tasman Glacier, and in the outer Tasman River Valley. All paired samples (n = 50) were collected so that the plunger impacts of both instruments were set close together on the rock surface (to avoid any influence of modifications to the surface by consecutive impacts on the same spot). In order to test their performance at the higher and lower end of surface hardness, similar paired sample tests were also made on the full-metal test anvil. The results of paired samples for all sites/moraines reveal that Q-/R-value pairs are closely clustered for young surfaces but more scattered for the older ones with a corresponding moderate R2 for a calculated linear trend. The greater variability of the older, weathered surfaces with greater scatter and hence higher standard deviations and broader confidence intervals has been recognised in numerous previous Schmidt-hammer studies and is elated to the effects of micro-scale lithological variability, which becomes a more pronounced influence with time exposed to subaerial weathering. But most important, Q-values and R-values are closely related and Q-values are systematically higher than R-values by c. 10 - 12 units over most of the operational range of both instruments. Linear conversion equations indicate a conversion factor in the order of + 11 units is applicable when converting R-values to Q-values. These estimates agree well with data obtained on the standard test anvil. Given the apparent interconvertibility of the two instruments, the SilverSchmidt is regarded as a potential replacement for the mechanical Schmidt hammer. This enables, moreover, continuity in study areas with existing R-value data archives. However, when comparing data sets of different age, adjustments must be made for any changes to the instrumental calibration value over time. References: Winkler, S. (2005): The 'Schmidt hammer' as a relative-age dating technique: potential and limitations of its application on Holocene moraines in Mt Cook National Park, Southern Alps, New Zealand. New Zealand Journal of Geology and Geophysics 48, 105 - 116. Winkler, S. (2009): First attempt to combine terrestrial cosmogenic nuclide (10Be) and Schmidt hammer relative-age dating: Strauchon Glacier, Southern Alps, New Zealand. Central European Journal of Geosciences 1, 274 - 290. Winkler, S. (2013): Investigation of late-Holocene moraines in the western Southern Alps, New Zealand, applying Schmidt-hammer exposure-age dating (SHD). The Holocene (online), doi: 10.1177/0959683613512169.

Pressure and wall shear stress in blood hammer - Analytical theory.

PubMed

Mei, Chiang C; Jing, Haixiao

2016-10-01

We describe an analytical theory of blood hammer in a long and stiffened artery due to sudden blockage. Based on the model of a viscous fluid in laminar flow, we derive explicit expressions of oscillatory pressure and wall shear stress. To examine the effects on local plaque formation we also allow the blood vessel radius to be slightly nonuniform. Without resorting to discrete computation, the asymptotic method of multiple scales is utilized to deal with the sharp contrast of time scales. The effects of plaque and blocking time on blood pressure and wall shear stress are studied. The theory is validated by comparison with existing water hammer experiments. Copyright © 2016. Published by Elsevier Inc.

36. SOUTHWEST TO BELTPOWERED CIRCA 1900 DROP HAMMER IN NORTHEASTERN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

36. SOUTHWEST TO BELT-POWERED CIRCA 1900 DROP HAMMER IN NORTHEASTERN QUADRANT OF FACTORY OPPOSITE FROM THE BLACKSMITH SHOP AREA. THIS MACHINE WAS USED TO SHAPE THE STEEL VANE HINGE PART AFTER IT WAS HEATED IN THE FORGE IN THE ADJACENT BLACKSMITH SHOP AREA. USE OF THE ROTATING POWER OF THE PULLEY AT THE TO MADE LIFTING THE HAMMER COMPARATIVELY QUICK AND EASY. AROUND THE MACHINE ARE WHEEL PARTS FOR ELI WINDMILLS. AT THE LEFT FOREGROUND IS A CIRCA 1900 FOUR-SPINDLE PRODUCTION DRILL PRESS WHICH WAS RELOCATED TO THIS AREA APPARENTLY AFTER THE END OF WINDMILL MANUFACTURE. - Kregel Windmill Company Factory, 1416 Central Avenue, Nebraska City, Otoe County, NE

Benefit from NASA

NASA Image and Video Library

2004-04-15

During the Apollo era Marshall Space Flight Center's engineers developed the Magnetomotive Hammer to remove distortions from Saturn V bulkhead gore segments. Using an intense magnetic field, the Hammer removed manufacturing distortions from rejected segments which otherwise would have been discarded at a cost of $30,000 each. Various automobile, ship and aircraft manufacturers adoped the technology for commercial use.

Assessing the Net Effects of Sanctions on the Proliferation of Weapons of Mass Destruction

DTIC Science & Technology

2012-12-01

354 Tabassum Zakaria and Caren Bohan, “Obama’s Olive Branch to Iran Turned into Sanctions Hammer,” Reuters, January...110 Zakaria , Tabassum and Caren Bohan, “Obama’s Olive Branch to Iran Turned into Sanctions Hammer,” Reuters, January 13, 2012, accessed on November

The Hammer Award is presented to KSC and 45th Space Wing.

NASA Technical Reports Server (NTRS)

1999-01-01

At a special presentation of the Hammer Award in the IMAX 2 Theater in the Kennedy Space Center Visitor Complex, former Apollo astronauts Neil Armstrong (left) and Edwin 'Buzz' Aldrin (second from right) applauded the recipients, Kennedy Space Center and the 45th Space Wing. The Hammer Award is Vice President Al Gore's special recognition of teams of federal employees who have made significant contributions in support of the principles of the National Partnership for Reinventing Government. This Hammer Award acknowledges the accomplishments of a joint NASA and Air Force team that established the Joint Base Operations and Support Contract (J-BOSC) Source Evaluation Board (SEB). Ed Gormel and Chris Fairey, co-chairs of the SEB, accepted the awards for the SEB. The team developed and implemented the acquisition strategy for establishing a single set of base operations and support service requirements for KSC, Cape Canaveral Air Station and Patrick Air Force Base. Armstrong and Aldrin were at KSC to attend a banquet and other activities for the 30th anniversary of the Apollo 11 mission, which landed the first man on the moon.

Exploring the experiences of EU qualified doctors working in the United Kingdom: a qualitative study.

PubMed

Legido-Quigley, Helena; Saliba, Vanessa; McKee, Martin

2015-04-01

This qualitative study of 23 doctors from other EU member states working in the UK highlights that, contrary to media reports, doctors from other member states working in the UK were well prepared and their main motivation to migrate was to learn new skills and experience a new health care system. Interviewees highlighted some aspects of their employment that work well and others that need improving. Some interviewees reported initially having language problems, but most noted that this was resolved after a few months. These doctors overwhelmingly reported having very positive experiences with patients, enjoying a NHS structure that was less hierarchical structure than in their home systems, and appreciating the emphasis on evidence-based medicine. Interviewees mostly complained about the lack of cleanliness of hospitals and gave some examples of risk to patient safety. Interviewees did not experience discrimination other than some instances of patronising and snobbish behaviour. However, a few believed that their nationality was a block to achieving senior positions. Overall, interviewees reported having enjoyable experiences with patients and appreciating what the NHS had to offer. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

'This is ordinary behaviour': categorization and culpability in Hamas leaders' accounts of the Palestinian/Israeli conflict.

PubMed

McKinlay, Andy; McVittie, Chris; Sambaraju, Rahul

2012-12-01

The present paper examines the talk of three senior figures from the Palestinian Hamas political movement. Data are drawn from a series of journalistic interviews that were conducted in the months leading up to the invasion of Gaza by Israel in December 2007. Using membership categorization analysis, we explore the membership categories and category-bound attributes that interviewers use in questions about responsibility for potentially culpable actions and the ways that these are taken up, challenged, or reworked by interviewees in presenting their own versions. The analytic findings show that interviewers deploy categories bound up with terrorism while interviewees develop alternative categorizations of resistance. Interviewers construct Palestinians as victims of Hamas' actions while interviewees construct them as victims of Israeli aggression and international indifference. In warranting these alternative constructions, the interviewees contrast current behaviours of the international community with those of the past and align current Palestinian actions with those previously taken by Western nations in resisting illegitimate occupations. Through these descriptions of categories and actions, the interviewees attribute to the wider international community responsibility for addressing the events of the ongoing conflict. ©2011 The British Psychological Society.

Grinding energy and physical properties of chopped and hammer-milled barley, wheat, oat, and canola straws

DOE Office of Scientific and Technical Information (OSTI.GOV)

J.S. Tumuluru; L.G. Tabil; Y. Song

2014-01-01

In the present study, specific energy for grinding and physical properties of wheat, canola, oat and barley straw grinds were investigated. The initial moisture content of the straw was about 0.13–0.15 (fraction total mass basis). Particle size reduction experiments were conducted in two stages: (1) a chopper without a screen, and (2) a hammer mill using three screen sizes (19.05, 25.4, and 31.75 mm). The lowest grinding energy (1.96 and 2.91 kWh t-1) was recorded for canola straw using a chopper and hammer mill with 19.05-mm screen size, whereas the highest (3.15 and 8.05 kWh t-1) was recorded for barleymore » and oat straws. The physical properties (geometric mean particle diameter, bulk, tapped and particle density, and porosity) of the chopped and hammer-milled wheat, barley, canola, and oat straw grinds measured were in the range of 0.98–4.22 mm, 36–80 kg m-3, 49–119 kg m-3, 600–1220 kg m-3, and 0.9–0.96, respectively. The average mean particle diameter was highest for the chopped wheat straw (4.22-mm) and lowest for the canola grind (0.98-mm). The canola grinds produced using the hammer mill (19.05-mm screen size) had the highest bulk and tapped density of about 80 and 119 kg m-3; whereas, the wheat and oat grinds had the lowest of about 58 and 88–90 kg m-3. The results indicate that the bulk and tapped densities are inversely proportional to the particle size of the grinds. The flow properties of the grinds calculated are better for chopped straws compared to hammer milled using smaller screen size (19.05 mm).« less

Validation of a Laboratory Method for Evaluating Dynamic Properties of Reconstructed Equine Racetrack Surfaces

PubMed Central

Setterbo, Jacob J.; Chau, Anh; Fyhrie, Patricia B.; Hubbard, Mont; Upadhyaya, Shrini K.; Symons, Jennifer E.; Stover, Susan M.

2012-01-01

Background Racetrack surface is a risk factor for racehorse injuries and fatalities. Current research indicates that race surface mechanical properties may be influenced by material composition, moisture content, temperature, and maintenance. Race surface mechanical testing in a controlled laboratory setting would allow for objective evaluation of dynamic properties of surface and factors that affect surface behavior. Objective To develop a method for reconstruction of race surfaces in the laboratory and validate the method by comparison with racetrack measurements of dynamic surface properties. Methods Track-testing device (TTD) impact tests were conducted to simulate equine hoof impact on dirt and synthetic race surfaces; tests were performed both in situ (racetrack) and using laboratory reconstructions of harvested surface materials. Clegg Hammer in situ measurements were used to guide surface reconstruction in the laboratory. Dynamic surface properties were compared between in situ and laboratory settings. Relationships between racetrack TTD and Clegg Hammer measurements were analyzed using stepwise multiple linear regression. Results Most dynamic surface property setting differences (racetrack-laboratory) were small relative to surface material type differences (dirt-synthetic). Clegg Hammer measurements were more strongly correlated with TTD measurements on the synthetic surface than the dirt surface. On the dirt surface, Clegg Hammer decelerations were negatively correlated with TTD forces. Conclusions Laboratory reconstruction of racetrack surfaces guided by Clegg Hammer measurements yielded TTD impact measurements similar to in situ values. The negative correlation between TTD and Clegg Hammer measurements confirms the importance of instrument mass when drawing conclusions from testing results. Lighter impact devices may be less appropriate for assessing dynamic surface properties compared to testing equipment designed to simulate hoof impact (TTD). Potential Relevance Dynamic impact properties of race surfaces can be evaluated in a laboratory setting, allowing for further study of factors affecting surface behavior under controlled conditions. PMID:23227183

Role of Physical Attractiveness in Peer Attribution of Psychological Disturbance

ERIC Educational Resources Information Center

Cash, Thomas F.; And Others

1977-01-01

The physical attractiveness stereotype was examined as it pertains to the attribution of psychological disturbance among peers. Consistent with the stereotype, attractive interviewees were judged as less disturbed with better prognosis than unattractive interviewees. (Author)

Managing and creating an image in the interview: the role of interviewee initial impressions.

PubMed

Swider, Brian W; Barrick, Murray R; Harris, T Brad; Stoverink, Adam C

2011-11-01

In employment interviews, individuals use impression management tactics to present themselves as suitable candidates to interviewers. However, not all impression management tactics, or the interviewees who employ them, are effective at positively influencing interview scores. Results of this study indicate that the relationship between impression management tactic usage and interview success is contingent on the type of tactic employed. Specifically, self-promotion was found to have a positive relationship (r = .20) and slight (r = -.11) and extensive (r = -.19) image creation were found to have negative relationships with end-of-interview scores. Further, the relationships between these 3 impression management tactics were moderated by interviewees' initial impressions of the interview (ΔR² ranged from .04 to .10). Interviewees who perceived they were seen as less suitable during rapport building were more effective when using any of the 3 impression management tactics. (c) 2011 APA, all rights reserved.

Psi Chi/APA Edwin B. Newman Graduate Research Award: Joseph H. Hammer

ERIC Educational Resources Information Center

American Psychologist, 2009

2009-01-01

Joseph H. Hammer, recipient of the Psi Chi/APA Edwin B. Newman Graduate Research Award, is cited for an outstanding research paper whose findings provide important evidence regarding the promise of a male-sensitive approach to mental health marketing and empirically support the inclusion of theory-driven enhancements in group-targeted mental…

Muffling Hammer Blows In A Workshop

NASA Technical Reports Server (NTRS)

Thiele, Alfred W.; Gilbert, Jeffrey L.; Gutow, David A.

1994-01-01

Sound-deadening bags placed on hammered workpieces. Useful in many workshop situations. Fabricated easily and inexpensively. Bags filled with particles of sand, metal shot, plastic, or glass, then sewn or molded shut. Tailored to fit special configurations of some workpieces. Devices used to deaden print rollers and to reduce vibrations in main-injector inlet manifold of rocket engine.

7. VIEW OF HYDRAULIC HAMMER STAMPING PRESS ON SIDE A ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. VIEW OF HYDRAULIC HAMMER STAMPING PRESS ON SIDE A OF BUILDING 883. THIS TYPE OF PRESS WAS USED FOR BOTH STAINLESS STEEL AND FOR DEPLETED URANIUM. (7/2/86) - Rocky Flats Plant, Uranium Rolling & Forming Operations, Southeast section of plant, southeast quadrant of intersection of Central Avenue & Eighth Street, Golden, Jefferson County, CO

The Effect of Venue and Wind on the Distance of a Hammer Throw

ERIC Educational Resources Information Center

Hunter, Iain

2005-01-01

In track and field, gravity and air resistance act on the hammer after it has been released. Both of these forces depend on altitude and latitude. In addition, air resistance also depends on wind, temperature, humidity, and barometric pressure. Often, air resistance and varying gravity throughout the earth are not considered when throwing…

The hammer QSD-quick stop device for high speed machining and rubbing

NASA Technical Reports Server (NTRS)

Black, J. T.; James, C. R.

1980-01-01

A quick stop device (QSD) was designed for use in orthogonal machining and rubbing experiments. QSD's are used to obtain chip root samples that are representative of the deformation taking place during dynamic (actual) cutting conditions. These 'frozen' specimens are helpful in examining the plastic deformation that occurs in the regions of compression and shear which form the chip; the secondary shear at the tool-chip interface; and the nose ploughing/flank rubbing action which operates on the newly machined surface. The Hammer QSD employs a shear pin mechanism, broken by a flying hammer, which is traveling at the same velocity as the workpiece. The device has been successfully tested up to 6000 sfpm (30.48 m/sec).

Linear or Rotary Actuator Using Electromagnetic Driven Hammer as Prime Mover

NASA Technical Reports Server (NTRS)

McMahan, Bert K. (Inventor); Sesler, Joshua J. (Inventor); Paine, Matthew T. (Inventor); McMahan, Mark C. (Inventor); Paine, Jeffrey S. N. (Inventor); Smith, Byron F. (Inventor)

2018-01-01

We claim a hammer driven actuator that uses the fast-motion, low-force characteristics of an electro-magnetic or similar prime mover to develop kinetic energy that can be transformed via a friction interface to produce a higher-force, lower-speed linear or rotary actuator by using a hammering process to produce a series of individual steps. Such a system can be implemented using a voice-coil, electro-mechanical solenoid or similar prime mover. Where a typical actuator provides limited range of motion or low force, the range of motion of a linear or rotary impact driven motor can be configured to provide large displacements which are not limited by the characteristic dimensions of the prime mover.

Water hammer prediction and control: the Green's function method

NASA Astrophysics Data System (ADS)

Xuan, Li-Jun; Mao, Feng; Wu, Jie-Zhi

2012-04-01

By Green's function method we show that the water hammer (WH) can be analytically predicted for both laminar and turbulent flows (for the latter, with an eddy viscosity depending solely on the space coordinates), and thus its hazardous effect can be rationally controlled and minimized. To this end, we generalize a laminar water hammer equation of Wang et al. (J. Hydrodynamics, B2, 51, 1995) to include arbitrary initial condition and variable viscosity, and obtain its solution by Green's function method. The predicted characteristic WH behaviors by the solutions are in excellent agreement with both direct numerical simulation of the original governing equations and, by adjusting the eddy viscosity coefficient, experimentally measured turbulent flow data. Optimal WH control principle is thereby constructed and demonstrated.

The role of the body in end-stage kidney disease in young adults: Gender, peer and intimate relationships.

PubMed

Lewis, Helen; Arber, Sara

2015-09-01

To understand how the physical body, and changes in the physical body, influence peer and intimate relationships and parenting in young adults on renal replacement therapies (RRT). Qualitative interview data from 40 young adults aged 16-30 years with end-stage kidney disease (ESKD), first diagnosed aged 0-19 years, were analysed using modified grounded theory. Alternating modalities of RRT had a 'yo-yo' effect on the bodies of interviewees, repeatedly reconstructing them as either 'transplanted' bodies, often initially obese, or as 'dialysis' bodies', often underweight. Invisible somatic changes had a major impact on gendered social identity, making intimate social relationships and parenthood problematic. Prepubertal onset interviewees were generally less successful in forming partnerships than those with postpubertal onset; and interviewees on dialysis were likely to postpone partnering until they were transplanted. Social networks were essential for finding a partner, but male interviewees had fewer networks than females. Parenthood was particularly challenging for female interviewees. In ESKD, life-saving RRT brings major changes to the body. These adversely affect social relationships and family formation during the crucial period of early adulthood. Effects vary according to age of onset, RRT modality, and gender, with those who were ill before puberty and those on dialysis worst affected. © The Author(s) 2015.

Selected properties of particleboard panels manufactured from rice straws of different geometries

Treesearch

Xianjun Li; Zhiyong Cai; Jerrold E. Winandy; Altaf H. Basta

2010-01-01

The objective is to evaluate the primary mechanical and physical properties of particleboard made from hammer-milled rice straw particles of six different categories and two types of resins. The results show the performance of straw particleboards is highly dependent upon the straw particle size controlled by the opening size of the perforated plate inside the hammer-...

Quality Assurance for Rapid Airfield Construction

DTIC Science & Technology

2008-05-01

necessary to conduct a volume-replacement density test for in-place soil. This density test, which was developed during this investigation, involves...the test both simpler and quicker. The Clegg hammer results are the primary means of judging compaction; thus, the requirements for density tests are...minimized through a stepwise acceptance procedure. Statistical criteria for evaluating Clegg hammer and density measurements are also included

An automated data collection system for a Charpy impact tester

NASA Technical Reports Server (NTRS)

Weigman, Bernard J.; Spiegel, F. Xavier

1993-01-01

A method for automated data collection has been developed for a Charpy impact tester. A potentiometer is connected to the pivot point of the hammer and measures the angular displacement of the hammer. This data is collected with a computer and, through appropriate software, accurately records the energy absorbed by the specimen. The device can be easily calibrated with minimal effort.

Genome Sequence of the Thermophile Bacillus coagulans Hammer, the Type Strain of the Species

PubMed Central

Su, Fei; Tao, Fei; Tang, Hongzhi

2012-01-01

Here we announce a 3.0-Mb assembly of the Bacillus coagulans Hammer strain, which is the type strain of the species within the genus Bacillus. Genomic analyses based on the sequence may provide insights into the phylogeny of the species and help to elucidate characteristics of the poorly studied strains of Bacillus coagulans. PMID:23105047

Genome sequence of the thermophile Bacillus coagulans Hammer, the type strain of the species.

PubMed

Su, Fei; Tao, Fei; Tang, Hongzhi; Xu, Ping

2012-11-01

Here we announce a 3.0-Mb assembly of the Bacillus coagulans Hammer strain, which is the type strain of the species within the genus Bacillus. Genomic analyses based on the sequence may provide insights into the phylogeny of the species and help to elucidate characteristics of the poorly studied strains of Bacillus coagulans.

View south of hydraulic hammer in boilermakers shop (probably the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View south of hydraulic hammer in boilermakers shop (probably the oldest piece of equipment in the yard, originally powered by steam) nameplate: United Engineers and FDRY. Co. Pittsburgh, Pa, USA Davy Brothers LTD. Patents - Aug 1, 1905, Feb, 1901, Sept 8, 1908 - 10000 lbs. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Structure Shop, League Island, Philadelphia, Philadelphia County, PA

Hypothenar hammer syndrome and basilic bypass.

PubMed

Chander, R K; Phair, J; Oza, P; Patel, M; Balar, N

2014-12-01

We report a case of hypothenar hammer syndrome. The case presents necessary diagnostic measures and discusses the etiology of this syndrome. Additionally, the case reviews treatments, which culminated in the eventual use of ulnar artery bypass with autogenous basilica vein to treat and resolve the ischemic fingers of the patient. © The Author(s) 2013 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Computerized Hammer Sounding Interpretation for Concrete Assessment with Online Machine Learning.

PubMed

Ye, Jiaxing; Kobayashi, Takumi; Iwata, Masaya; Tsuda, Hiroshi; Murakawa, Masahiro

2018-03-09

Developing efficient Artificial Intelligence (AI)-enabled systems to substitute the human role in non-destructive testing is an emerging topic of considerable interest. In this study, we propose a novel hammering response analysis system using online machine learning, which aims at achieving near-human performance in assessment of concrete structures. Current computerized hammer sounding systems commonly employ lab-scale data to validate the models. In practice, however, the response signal patterns can be far more complicated due to varying geometric shapes and materials of structures. To deal with a large variety of unseen data, we propose a sequential treatment for response characterization. More specifically, the proposed system can adaptively update itself to approach human performance in hammering sounding data interpretation. To this end, a two-stage framework has been introduced, including feature extraction and the model updating scheme. Various state-of-the-art online learning algorithms have been reviewed and evaluated for the task. To conduct experimental validation, we collected 10,940 response instances from multiple inspection sites; each sample was annotated by human experts with healthy/defective condition labels. The results demonstrated that the proposed scheme achieved favorable assessment accuracy with high efficiency and low computation load.

Simulation of systems for shock wave/compression waves damping in technological plants

NASA Astrophysics Data System (ADS)

Sumskoi, S. I.; Sverchkov, A. M.; Lisanov, M. V.; Egorov, A. F.

2016-09-01

At work of pipeline systems, flow velocity decrease can take place in the pipeline as a result of the pumps stop, the valves shutdown. As a result, compression waves appear in the pipeline systems. These waves can propagate in the pipeline system, leading to its destruction. This phenomenon is called water hammer (water hammer flow). The most dangerous situations occur when the flow is stopped quickly. Such urgent flow cutoff often takes place in an emergency situation when liquid hydrocarbons are being loaded into sea tankers. To prevent environment pollution it is necessary to stop the hydrocarbon loading urgently. The flow in this case is cut off within few seconds. To prevent an increase in pressure in a pipeline system during water hammer flow, special protective systems (pressure relief systems) are installed. The approaches to systems of protection against water hammer (pressure relief systems) modeling are described in this paper. A model of certain pressure relief system is considered. It is shown that in case of an increase in the intensity of hydrocarbons loading at a sea tanker, presence of the pressure relief system allows to organize safe mode of loading.

A Study for the Restoration of Hong Dae-Yong Honsangui - Focusing on the structure and operating mechanism

NASA Astrophysics Data System (ADS)

Lee, Yong Sam; Kim, Sang Hyuk; Park, Je Hoon

2013-09-01

Honsangui (celestial globe) which is a water-hammering method astronomical clock is recorded in "Juhaesuyong" which is Volume VI of supplement from "Damheonseo", written by Hong Dae-Yong (1731~1783). We made out the conceptual design of Hong Dae-Yong's Honsangui through the study on its structure and working mechanism. Honsangui consist of three rings and two layers, the structure of rings which correspond to outer layer is similar to his own Tongcheonui (armillary sphere) which is a kind of armillary sphere. Honsang sphere which correspond to inner layer depicts constellations and milky way and two beads hang on it as Sun and Moon respectively for realize the celestial motion. Tongcheonui is operated by the pendulum power but Honsangui is operated by water-hammering method mechanism. This Honsangui's working mechanism is the traditional way of Joseon and it was simplified the working mechanism of Shui y'n i hsiang t'ai which is a representative astronomical clock of China. This record of Honsangui is the only historical record about the water-hammering method working mechanism of Joseon Era and it provide the study of water-hammering method mechanism with a vital clue.

Organocatalytic aza-Michael/retro-aza-Michael reaction: pronounced chirality amplification in aza-Michael reaction and racemization via retro-aza-Michael reaction.

PubMed

Cai, Yong-Feng; Li, Li; Luo, Meng-Xian; Yang, Ke-Fang; Lai, Guo-Qiao; Jiang, Jian-Xiong; Xu, Li-Wen

2011-05-01

A detailed experimental investigation of an aza-Michael reaction of aniline and chalcone is presented. A series of Cinchona alkaloid-derived organocatalysts with different functional groups were prepared and used in the aza-Michael and retro-aza-Michael reaction. There was an interesting finding that a complete reversal of stereoselectivity when a benzoyl group was introduced to the cinchonine and cinchonidine. The chirality amplification vs. time proceeds in the quinine-derived organocatalyst containing silicon-based bulky group, QN-TBS, -catalyzed aza-Michael reaction under solvent-free conditions. In addition, we have demonstrated for the first time that racemization was occurred in suitable solvents under mild conditions due to retro-aza-Michael reaction of the Michael adduct of aniline with chalcone. These indicate the equilibrium of retro-aza-Michael reaction and aza-Michael reaction produce the happening of chirality amplification in aza-Michael reaction and racemization via retro-aza-Michael reaction under different conditions, which would be beneficial to the development of novel chiral catalysts for the aza-Michael reactions. Copyright © 2011 Wiley-Liss, Inc.

Anisotropy in Alpedrete granite cutting (Rift, Grain and Hardway directions) and effect on bush hammered heritage ashlars

NASA Astrophysics Data System (ADS)

Freire-Lista, David Martin; Fort, Rafael

2015-04-01

Many monuments and cities that are part of humanity's heritage have been built with carved granite ashlars. This dimension stone is one of the most used due to its abundance and durability. Traditional quarrymen have used anisotropic planes to cut granite blocks in the quarry for improved cutting performance. These planes are called Rift, Grain and Hardway (R, G, H) according to the ease of cutting. The aim of this study is to determine the response of each of the three orthogonal cutting planes R, G and H to the craft styling with bush hammer, based on their decay. Alpedrete granite was selected for this research, it is a monzogranite quarried in the Sierra de Guadarrana (Spanish Central System) foothills, in the province of Madrid, Spain. It is one of the most representative of Madrid's heritage granites. Alpedrete granite is also used as building stone in other European cities. From an Alpedrete granite bush hammered ashlar, three thin sections were cut parallel to the H plane; these thin sections cut R and G bush hammered planes. Also three thin sections have been cut parallel to the R plane at a distance of 2 mm, 10 mm and 30 mm from the bush hammered surface. All thin sections have been treated with fluorescein. In each of the thin sections a micrograph mosaic was performed covering the entire area (about 10 cm2, 300 photomicrographs) and printed with 120 increases. The length and spacing of inter-, intra- and trans-crystalline microcracks were quantified and measured. Microcracks were subdivided based on affected minerals in each R, G and H planes. Through these observations it was found that Alpedrete Granite R plane (easier to cut) is determined by exfoliation microcracks orientation. That is, R plane is parallel to the exfoliations microcracks, which are intra-crystalline and straight. The cutting of stones in the R plane is due to the coalescence of straight microcracks in the plane. This plane minimizes the effort and cost of subsequent carving so it has been used preferably as wall façades in heritage building ashlars. That is, the ashlars exposed surface. In other words, the exfoliation microcracks are oriented vertically in heritage ashlars. R planes bush hammering produces many new microcracks and propagation of exfoliation microcracks, generating significant decay with parallel and oblique microcracks to the bush hammered surface to a depth of more than 10 mm. G and H planes bush hammering generates coalescence and increased length of intra-crystalline exfoliation microcracks in the R plane; although, with less generation of new microcracks and less surface decay. To understand the decay in bush hammered granite ashlars and sculptures it is essential to study the orientation and distribution of exfoliations microcracks, which follow the R orientation stone in the quarry. This orientation should be reproduced when performing artificial accelerated ageing tests, especially with stones used in heritage buildings. Acknowledgements This study was funded by the Community of Madrid under the GEOMATERIALS 2 project (S2013/MIT-2914). The authors are members of the Complutense University of Madrid's Research Group: 'Alteración y Conservación de los Materiales Pétreos del Patrimonio' (ref. 921349)

Cavitation luminescence in a water hammer: Upscaling sonoluminescence

NASA Astrophysics Data System (ADS)

Su, C.-K.; Camara, C.; Kappus, B.; Putterman, S. J.

2003-06-01

Oscillatory acceleration and deceleration of a column of water leads to a pipe hammer as well as cavitation. With a small amount of xenon gas dissolved in the water, we can detect a stream of predominantly ultraviolet subnanosecond flashes of light which are attributed to collapsing bubbles. The observed emission can exceed 108 photons for a single collapse and has a peak power over 0.4 W.

Sliding pressure control valve for pneumatic hammer drill

DOEpatents

Polsky, Yarom [Albuquerque, NM

2011-08-30

A pneumatic device control apparatus and method comprising a ported valve slidably fitted over a feed tube of the pneumatic device, and using a compliant biasing device to constrain motion of the valve to provide asymmetric timing for extended pressurization of a power chamber and reduced pressurization of a return chamber of the pneumatic device. The pneumatic device can be a pneumatic hammer drill.

Drop Hammer Tests with Three Oleo Strut Models and Three Different Shock Strut Oils at Low Temperatures

NASA Technical Reports Server (NTRS)

Kranz, M

1954-01-01

Drop hammer tests with different shock strut models and shock strut oils were performed at temperatures ranging to -40 C. The various shock strut models do not differ essentially regarding their springing and damping properties at low temperatures; however, the influence of the different shock strut oils on the springing properties at low temperatures varies greatly.

Biography for Michael Rossol | NREL

Science.gov Websites

Biography for Michael Rossol Michael Rossol Michael Rossol Resource Data Scientist Michael.Rossol @nrel.gov | 303-275-3680 Michael Rossol is a member of the Systems Modeling team within the Systems Modeling

Sampling for Soil Carbon Stock Assessment in Rocky Agricultural Soils

NASA Technical Reports Server (NTRS)

Beem-Miller, Jeffrey P.; Kong, Angela Y. Y.; Ogle, Stephen; Wolfe, David

2016-01-01

Coring methods commonly employed in soil organic C (SOC) stock assessment may not accurately capture soil rock fragment (RF) content or soil bulk density (rho (sub b)) in rocky agricultural soils, potentially biasing SOC stock estimates. Quantitative pits are considered less biased than coring methods but are invasive and often cost-prohibitive. We compared fixed-depth and mass-based estimates of SOC stocks (0.3-meters depth) for hammer, hydraulic push, and rotary coring methods relative to quantitative pits at four agricultural sites ranging in RF content from less than 0.01 to 0.24 cubic meters per cubic meter. Sampling costs were also compared. Coring methods significantly underestimated RF content at all rocky sites, but significant differences (p is less than 0.05) in SOC stocks between pits and corers were only found with the hammer method using the fixed-depth approach at the less than 0.01 cubic meters per cubic meter RF site (pit, 5.80 kilograms C per square meter; hammer, 4.74 kilograms C per square meter) and at the 0.14 cubic meters per cubic meter RF site (pit, 8.81 kilograms C per square meter; hammer, 6.71 kilograms C per square meter). The hammer corer also underestimated rho (sub b) at all sites as did the hydraulic push corer at the 0.21 cubic meters per cubic meter RF site. No significant differences in mass-based SOC stock estimates were observed between pits and corers. Our results indicate that (i) calculating SOC stocks on a mass basis can overcome biases in RF and rho (sub b) estimates introduced by sampling equipment and (ii) a quantitative pit is the optimal sampling method for establishing reference soil masses, followed by rotary and then hydraulic push corers.

Auto-Gopher: A Wire-Line Rotary-Hammer Ultrasonic Drill

NASA Technical Reports Server (NTRS)

Badescu, Mircea; Sherrit, Stewart; Bao, Xiaogi; Bar-Cohen, Yoseph; Chen, Beck

2011-01-01

Developing technologies that would enable NASA to sample rock, soil, and ice by coring, drilling or abrading at a significant depth is of great importance for a large number of in-situ exploration missions as well as for earth applications. Proven techniques to sample Mars subsurface will be critical for future NASA astrobiology missions that will search for records of past and present life on the planet, as well as, the search for water and other resources. A deep corer, called Auto-Gopher, is currently being developed as a joint effort of the JPL's NDEAA laboratory and Honeybee Robotics Corp. The Auto-Gopher is a wire-line rotary-hammer drill that combines rock breaking by hammering using an ultrasonic actuator and cuttings removal by rotating a fluted bit. The hammering mechanism is based on the Ultrasonic/Sonic Drill/Corer (USDC) that has been developed as an adaptable tool for many of drilling and coring applications. The USDC uses an intermediate free-flying mass to transform the high frequency vibrations of the horn tip into a sonic hammering of a drill bit. The USDC concept was used in a previous task to develop an Ultrasonic/Sonic Ice Gopher. The lessons learned from testing the ice gopher were implemented into the design of the Auto-Gopher by inducing a rotary motion onto the fluted coring bit. A wire-line version of such a system would allow penetration of significant depth without a large increase in mass. A laboratory version of the corer was developed in the NDEAA lab to determine the design and drive parameters of the integrated system. The design configuration lab version of the design and fabrication and preliminary testing results are presented in this paper

Single Piezo-Actuator Rotary-Hammering (SPaRH) Drill

NASA Technical Reports Server (NTRS)

Sherrit, Stewart; Domm, Lukas; Bao, Xiaoqi; Bar-Cohen, Yoseph; Chang, Zensheu; Badescu, Mircea

2012-01-01

The search for present or past life in the Universe is one of the most important objectives of NASA's exploration missions. Drills for subsurface sampling of rocks, ice and permafrost are an essential tool for astrobiology studies on other planets. Increasingly, it is recognized that drilling via a combination of rotation and hammering offers an efficient and effective rapid penetration mechanism. The rotation provides an intrinsic method for removal of cuttings from the borehole while the impact and shear forces aids in the fracturing of the penetrated medium. Conventional drills that use a single actuator are based on a complex mechanism with many parts and their use in future mission involves greater risk of failure and/or may require lubrication that can introduce contamination. In this paper, a compact drill is reported that uses a single piezoelectric actuator to produce hammering and rotation of the bit. A horn with asymmetric grooves was design to impart a longitudinal (hammering) and transverse force (rotation) to a keyed free mass. The drill requires low axial pre-load since the hammering-impacts fracture the rock under the bit kerf and rotate the bit to remove the powdered cuttings while augmenting the rock fracture via shear forces. The vibrations 'fluidize' the powdered cuttings inside the flutes reducing the friction with the auger surface. This action reduces the consumed power and heating of the drilled medium helping to preserve the pristine content of the acquired samples. The drill consists of an actuator that simultaneously impacts and rotates the bit by applying force and torque via a single piezoelectric stack actuator without the need for a gearbox or lever mechanism. This can reduce the development/fabrication cost and complexity. In this paper, the drill mechanism will be described and the test results will be reported and discussed.

KSC-99pp0836

NASA Image and Video Library

1999-07-16

Morley Winograd (right), director of the National Partnership for Reinventing Government, presents the Hammer Award to Ed Gormel (left) and Chris Fairey (center) at a special presentation in the IMAX 2 Theater in the Kennedy Space Center Visitor Complex. The Hammer Award is Vice President Al Gore's special recognition of teams of federal employees who have made significant contributions in support of the principles of the National Partnership for Reinventing Government. This Hammer Award acknowledges the accomplishments of a joint NASA and Air Force team that established the Joint Base Operations and Support Contract (J-BOSC) Source Evaluation Board (SEB). Gormel and Fairey are co-chairs of the SEB. The team developed and implemented the acquisition strategy for establishing a single set of base operations and support service requirements for KSC, Cape Canaveral Air Station and Patrick Air Force Base

KSC-99pp0835

NASA Image and Video Library

1999-07-16

Ed Gormel (left) and Chris Fairey (center) accept the Hammer Award at a special presentation in the IMAX 2 Theater in the Kennedy Space Center Visitor Complex. Presenting the award is Morley Winograd (right), director of the National Partnership for Reinventing Government. The Hammer Award is Vice President Al Gore's special recognition of teams of federal employees who have made significant contributions in support of the principles of the National Partnership for Reinventing Government. This Hammer Award acknowledges the accomplishments of a joint NASA and Air Force team that established the Joint Base Operations and Support Contract (J-BOSC) Source Evaluation Board (SEB). Gormel and Fairey are co-chairs of the SEB. The team developed and implemented the acquisition strategy for establishing a single set of base operations and support service requirements for KSC, Cape Canaveral Air Station and Patrick Air Force Base

41 CFR 301-75.201 - May we allow the interviewee to use individual Government contractor-issued charge cards for pre...

Code of Federal Regulations, 2010 CFR

2010-07-01

... interviewee to use individual Government contractor-issued charge cards for pre-employment interview travel... System TEMPORARY DUTY (TDY) TRAVEL ALLOWANCES AGENCY RESPONSIBILITIES 75-PRE-EMPLOYMENT INTERVIEW TRAVEL... individual Government contractor-issued charge cards for pre-employment interview travel? No. ...

Managing and Creating an Image in the Interview: The Role of Interviewee Initial Impressions

ERIC Educational Resources Information Center

Swider, Brian W.; Barrick, Murray R.; Harris, T. Brad; Stoverink, Adam C.

2011-01-01

In employment interviews, individuals use impression management tactics to present themselves as suitable candidates to interviewers. However, not all impression management tactics, or the interviewees who employ them, are effective at positively influencing interview scores. Results of this study indicate that the relationship between impression…

A Dialect Survey of the Appalachian Region. Final Report.

ERIC Educational Resources Information Center

Qazilbash, A. Hussain

To determine the linguistic structure of the Appalachian region, 9 interviewees from each of 13 states (Alabama, Georgia, Mississippi, Maryland, New York, Kentucky, North Carolina, Ohio, Pennsylvania, South Carolina, Tennessee, Virginia, and West Virginia) were chosen by selected criteria. The interviewees were classified as rustic, modern, and…

Influence of Model's Race and Sex on Interviewees' Self-Disclosure.

ERIC Educational Resources Information Center

Casciani, Joseph M.

1978-01-01

Examined how a model's personal characteristics and disclosure characteristics affect White interviewees' self-disclosures. Validity of Jourard's Self-Disclosure Questionnaire was investigated. Results showed that the model's race did not affect his/her behavior or ratings of models. Self-Disclosure Questionnaire showed subjects would disclose as…

Vibration characteristics of teak wood filled steel tubes

NASA Astrophysics Data System (ADS)

Danawade, Bharatesh Adappa; Malagi, Ravindra Rachappa

2018-05-01

The objective of this paper is to determine fundamental frequency and damping ratio of teak wood filled steel tubes. Mechanically bonded teak wood filled steel tubes have been evaluated by experimental impact hammer test using modal analysis. The results of impact hammer test were verified and validated by finite element tool ANSYS using harmonic analysis. The error between the two methods was observed to be within acceptable limit.

The Hammer Award is presented to KSC and 45th Space Wing.

NASA Technical Reports Server (NTRS)

1999-01-01

At a special presentation in the IMAX 2 Theater in the Kennedy Space Center Visitor Complex, the Hammer Award is presented to Kennedy Space Center and the 45th Space Wing. Among the attendees in the audience are (center) Center Director Roy D. Bridges Jr., flanked by (at left) Commander of the 45th Space Wing Brig. Gen. F. Randall Starbuck and (at right) Commander of the Air Force Space Command General Richard B. Myers. Standing second from right is NASA Administrator Daniel S. Goldin. At the far right is Morley Winograd, director of the National Partnership for Reinventing Government, who presented the award. The Hammer Award is Vice President Al Gore's special recognition of teams of federal employees who have made significant contributions in support of the principles of the National Partnership for Reinventing Government. This Hammer Award acknowledges the accomplishments of a joint NASA and Air Force team that established the Joint Base Operations and Support Contract (J- BOSC) Source Evaluation Board (SEB). Ed Gormel and Chris Fairey, co-chairs of the SEB, accepted the awards for the SEB. The team developed and implemented the acquisition strategy for establishing a single set of base operations and support service requirements for KSC, Cape Canaveral Air Station and Patrick Air Force Base.

New Interview and Observation Measures of the Broader Autism Phenotype: Impressions of Interviewee Measure

ERIC Educational Resources Information Center

Pickles, A.; Parr, J. R.; Rutter, M. L.; De Jonge, M. V.; Wallace, S.; Le Couteur, A. S.; van Engeland, H.; Wittemeyer, K.; McConachie, H.; Roge, B.; Mantoulan, C.; Pedersen, L.; Isager, T.; Poustka, F.; Bolte, S.; Bolton, P.; Weisblatt, E.; Green, J.; Papanikolaou, K.; Bailey, A. J.

2013-01-01

A 20 item observational measure of social functioning, the Impression of Interviewee rating scale, is one of three measures devised to assess the broader autism phenotype. The sample studied included families containing at least two individuals with autism spectrum disorder; observations were undertaken by the researcher who interviewed the…

Conceptions and Contexts: On the Interpretation of Interview and Observational Data

ERIC Educational Resources Information Center

Hallden, Ola; Haglund, Liza; Stromdahl, Helge

2007-01-01

Research within a constructivist approach often relies on interview data, which are used to reveal beliefs held by the interviewee or to expose conceptions or conceptual structures that are supposed to reside within the interviewee. From a sociocultural perspective, severe criticism has been leveled against the neglect of the problems of inferring…

Exploring commonality and difference in in-depth interviewing: a case-study of researching British Asian women.

PubMed

Ramji, Hasmita

2008-03-01

This paper draws on the experience of researching British South Asian women's lives in London as a female British Asian researcher to explore how cultural commonality and difference is shaped by agency and interaction in the research process. It examines these issues through a discussion of how the shared cultural identity of the researcher and the interviewees emerged as both a point of commonality and difference in the research process; with the researcher being ;positioned' in terms of both as a result of the interviewees' agency in interpreting their cultural commonality. In particular, issues of 'Indianness' and religion emerged as points on which interviewees exercised agency and interpreted the researcher's cultural identity. This was the basis on which they claimed commonality or difference and this assessment consequently impacted on their interaction with the researcher. The article suggests that more attention needs to be given to how assumptions made by interviewees regarding the cultural identity of the researcher through their agency and interaction in the research process shapes interview dynamics.

Coal-shale interface detection system

NASA Technical Reports Server (NTRS)

Campbell, R. A.; Hudgins, J. L.; Morris, P. W.; Reid, H., Jr.; Zimmerman, J. E. (Inventor)

1979-01-01

A coal-shale interface detection system for use with coal cutting equipment consists of a reciprocating hammer on which an accelerometer is mounted to measure the impact of the hammer as it penetrates the ceiling or floor surface of a mine. A pair of reflectometers simultaneously view the same surface. The outputs of the accelerometer and reflectometers are detected and jointly registered to determine when an interface between coal and shale is being cut through.

Coal-shale interface detector

NASA Technical Reports Server (NTRS)

Reid, H., Jr. (Inventor)

1980-01-01

A coal-shale interface detector for use with coal cutting equipment is described. The detector consists of a reciprocating hammer with an accelerometer to measure the impact of the hammer as it penetrates the ceiling or floor surface of a mine. Additionally, a pair of reflectometers simultaneously view the same surface, and the outputs from the accelerometer and reflectometers are detected and jointly registered to determine when an interface between coal and shale is being cut through.

KSC-99pp0833

NASA Image and Video Library

1999-07-16

Commander of the Air Force Space Command, General Richard B. Myers (left) joins Ed Gormel (center) and Commander of the 45th Space Wing Brig. Gen. F. Randall Starbuck (right) after the presentation of the Hammer Award. The Hammer Award is Vice President Al Gore's special recognition of teams of federal employees who have made significant contributions in support of the principles of the National Partnership for Reinventing Government. Morley Winograd, director of the National Partnership for Reinventing Government, presented the award to the Joint Base Operations and Support Contract (J-BOSC) Source Evaluation Board (SEB). Gormel is a co-chair of the SEB. This Hammer Award acknowledges the accomplishments of a joint NASA and Air Force team that established the J-BOSC SEB. The team developed and implemented the acquisition strategy for establishing a single set of base operations and support service requirements for KSC, Cape Canaveral Air Station and Patrick Air Force Base

Research on Impact Stress and Fatigue Simulation of a New Down-to-the-Hole Impactor Based on ANSYS

NASA Astrophysics Data System (ADS)

Wu, Tao; Wang, Wei; Yao, Aiguo; Li, Yongbo; He, Wangyong; Fei, Dongdong

2018-06-01

In the present work, a down-to-the-hole electric hammer driven by linear motor is reported for drilling engineering. It differs from the common hydraulic or pneumatic hammers in that it can be applied to some special occasions without circulating medium due to its independence of the drilling fluid. The impact stress caused by the reciprocating motion between stator and rotor and the fatigue damage in key components of linear motor are analyzed by the ANSYS Workbench software and 3D model. Based on simulation results, the hammer's structure is optimized by using special sliding bearing, increasing the wall thickness of key and multilayer buffer gasket. Fatigue life and coefficient issues of the new structure are dramatically improved. However buffer gasket reduces the impactor's energy, different bumper structure effect on life improving and energy loss have also been elaborated.

KSC-99pp0832

NASA Image and Video Library

1999-07-16

At a special presentation in the IMAX 2 Theater in the Kennedy Space Center Visitor Complex, KSC and 45th Space Wing employees share the honors as recipients of the Hammer Award. The Hammer Award is Vice President Al Gore's special recognition of teams of federal employees who have made significant contributions in support of the principles of the National Partnership for Reinventing Government. Morley Winograd, director of the National Partnership for Reinventing Government, presented the award to Ed Gormel and Chris Fairey, co-chairs of the Joint Base Operations and Support Contract (J-BOSC) Source Evaluation Board (SEB. This Hammer Award acknowledges the accomplishments of a joint NASA and Air Force team that established the J-BOSC SEB. The team developed and implemented the acquisition strategy for establishing a single set of base operations and support service requirements for KSC, Cape Canaveral Air Station and Patrick Air Force Base

KSC-99pp0834

NASA Image and Video Library

1999-07-16

KSC's Director of Public Affairs Joe Gordon (left) applauds as Ed Gormel and Chris Fairey are named recipients of the Hammer Award at a special presentation in the IMAX 2 Theater in the Kennedy Space Center Visitor Complex. Presenting the award is Morley Winograd (at the podium), director of the National Partnership for Reinventing Government. The Hammer Award is Vice President Al Gore's special recognition of teams of federal employees who have made significant contributions in support of the principles of the National Partnership for Reinventing Government. This Hammer Award acknowledges the accomplishments of a joint NASA and Air Force team that established the Joint Base Operations and Support Contract (J-BOSC) Source Evaluation Board (SEB). Gormel and Fairey are co-chairs of the SEB. The team developed and implemented the acquisition strategy for establishing a single set of base operations and support service requirements for KSC, Cape Canaveral Air Station and Patrick Air Force Base

Astronaut David Scott watching hammer and feather fall to lunar surface

NASA Image and Video Library

1971-08-02

S71-43788 (2 Aug. 1971) --- Astronaut David R. Scott, Apollo 15 commander, watches a geological hammer and a feather hit the lunar surface simultaneously in a test of Galileo's law of motion concerning falling bodies, as seen in this color reproduction taken from a transmission made by the RCA color television camera mounted on the Lunar Roving Vehicle (LRV). Scott released the hammer from his right hand and the feather from his left at the same instant. Galileo (1564-1642) was the great Italian astronomer and physicist. This experiment occurred toward the end of the third and final lunar surface extravehicular activity (EVA) by astronauts Scott and James B. Irwin, lunar module pilot. While Scott and Irwin descended in the Lunar Module (LM) to explore the moon, astronaut Alfred M. Worden, command module pilot, remained in the Command and Service Modules (CSM) in lunar orbit.

Forwardly-placed firearm fire control assembly

DOEpatents

Frickey, Steven J.

2001-12-22

A firearm fire control assembly for disposition in a forwardly placed support-hand operative relationship within a firearm having a combination of a firing pin and a firearm hammer adapted to engage and fire a cartridge, a sear assembly to alternately engage and disengage the combination of the firearm hammer and firing pin, and a trigger assembly including a movable trigger mechanism that is operable to engage the sear assembly to cause the firearm hammer firing pin combination to fire the firearm, a fire control assembly including a fire control depression member and a fire control rod operably connected to the depression member, and being positioned in a forward disposition disposed within a forestock of the firearm, and the depression member adapted to be operably engaged and depressed by the user's conventional forwardly placed support hand to maneuver the fire control rod to provide firing control of the firing of the firearm.

KSC-99pp0831

NASA Image and Video Library

1999-07-16

Ed Gormel (left) and Chris Fairey (center) display the Hammer Award they received at a special presentation in the IMAX 2 Theater in the Kennedy Space Center Visitor Complex. The Hammer Award is Vice President Al Gore's special recognition of teams of federal employees who have made significant contributions in support of the principles of the National Partnership for Reinventing Government. At the podium is Morley Winograd director of the National Partnership for Reinventing Government, who presented the award. This Hammer Award acknowledges the accomplishments of a joint NASA and Air Force team that established the Joint Base Operations and Support Contract (J-BOSC) Source Evaluation Board (SEB). Fairey and Gormel are co-chairs of the SEB. The team developed and implemented the acquisition strategy for establishing a single set of base operations and support service requirements for KSC, Cape Canaveral Air Station and Patrick Air Force Base

Understanding the impact of genetic testing for inherited retinal dystrophy

PubMed Central

Combs, Ryan; McAllister, Marion; Payne, Katherine; Lowndes, Jo; Devery, Sophie; Webster, Andrew R; Downes, Susan M; Moore, Anthony T; Ramsden, Simon; Black, Graeme; Hall, Georgina

2013-01-01

The capability of genetic technologies is expanding rapidly in the field of inherited eye disease. New genetic testing approaches will deliver a step change in the ability to diagnose and extend the possibility of targeted treatments. However, evidence is lacking about the benefits of genetic testing to support service planning. Here, we report qualitative data about retinal dystrophy families' experiences of genetic testing in United Kingdom. The data were part of a wider study examining genetic eye service provision. Twenty interviewees from families in which a causative mutation had been identified by a genetic eye clinic were recruited to the study. Fourteen interviewees had chosen to have a genetic test and five had not; one was uncertain. In-depth telephone interviews were conducted allowing a thorough exploration of interviewees' views and experiences of the benefits of genetic counselling and testing. Transcripts were analysed using thematic analysis. Both affected and unaffected interviewees expressed mainly positive views about genetic testing, highlighting benefits such as diagnostic confirmation, risk information, and better preparation for the future. Negative consequences included the burden of knowledge, moral dilemmas around reproduction, and potential impact on insurance. The offer of genetic testing was often taken up, but was felt unnecessary in some cases. Interviewees in the study reported many benefits, suggesting genetic testing should be available to this patient group. The benefits and risks identified will inform future evaluation of models of service delivery. This research was part of a wider study exploring experiences of families with retinal dystrophy. PMID:23403902

Understanding the impact of genetic testing for inherited retinal dystrophy.

PubMed

Combs, Ryan; McAllister, Marion; Payne, Katherine; Lowndes, Jo; Devery, Sophie; Webster, Andrew R; Downes, Susan M; Moore, Anthony T; Ramsden, Simon; Black, Graeme; Hall, Georgina

2013-11-01

The capability of genetic technologies is expanding rapidly in the field of inherited eye disease. New genetic testing approaches will deliver a step change in the ability to diagnose and extend the possibility of targeted treatments. However, evidence is lacking about the benefits of genetic testing to support service planning. Here, we report qualitative data about retinal dystrophy families' experiences of genetic testing in United Kingdom. The data were part of a wider study examining genetic eye service provision. Twenty interviewees from families in which a causative mutation had been identified by a genetic eye clinic were recruited to the study. Fourteen interviewees had chosen to have a genetic test and five had not; one was uncertain. In-depth telephone interviews were conducted allowing a thorough exploration of interviewees' views and experiences of the benefits of genetic counselling and testing. Transcripts were analysed using thematic analysis. Both affected and unaffected interviewees expressed mainly positive views about genetic testing, highlighting benefits such as diagnostic confirmation, risk information, and better preparation for the future. Negative consequences included the burden of knowledge, moral dilemmas around reproduction, and potential impact on insurance. The offer of genetic testing was often taken up, but was felt unnecessary in some cases. Interviewees in the study reported many benefits, suggesting genetic testing should be available to this patient group. The benefits and risks identified will inform future evaluation of models of service delivery. This research was part of a wider study exploring experiences of families with retinal dystrophy.

41 CFR 301-75.103 - What are our responsibilities when we authorize an interviewee to use common carrier...

Code of Federal Regulations, 2010 CFR

2010-07-01

... interview travel? 301-75.103 Section 301-75.103 Public Contracts and Property Management Federal Travel Regulation System TEMPORARY DUTY (TDY) TRAVEL ALLOWANCES AGENCY RESPONSIBILITIES 75-PRE-EMPLOYMENT INTERVIEW TRAVEL Travel Expenses § 301-75.103 What are our responsibilities when we authorize an interviewee to use...

If Only I Had Known...: Young People's Participation in the Construction of Their Learning Disability Labels

ERIC Educational Resources Information Center

Savaria, Elizabeth; Underwood, Kathryn; Sinclair, Delia

2011-01-01

This study explores how young people participate in the construction of their learning disabilities and how the experience impacts their self-concept. None of the interviewees in the study participated in the Identification Placement and Review Committee (IPRC) meetings conducted in Ontario. The interviewees did participate in a variety of other…

Interviewee Perceptions of Employment Screening Interviews: Relationships among Perceptions of Communication Satisfaction, Interviewer Credibility and Trust, Interviewing Experience, and Interview Outcomes.

ERIC Educational Resources Information Center

Jablin, Fredric M.; And Others

A study examined employment screening interviews to determine the relationships between an interviewee's perceptions of interview communication satisfaction, interviewer credibility and trust, previous interviewing experiences, and a number of interview outcomes, including expectation of a second interview. Data were collected from 69 students…

Coal-shale interface detection

NASA Technical Reports Server (NTRS)

Broussard, P. H.; Burch, J. L.; Drost, E. J.; Stein, R. J. (Inventor)

1979-01-01

A penetrometer for coal-shale interface detection is presented. It is used with coal cutting equipment consisting of a reciprocating hammer, having an accelerometer mounted thereon to measure the impact of the hammer as it penetrates the ceiling or floor surface of a mine. Additionally, a pair of reflectometers simultaneously view the same surface, and the outputs from the accelerometer and reflectometers are detected and jointly registered to determine when an interface between coal and shale is being cut through.

Foot ulcer risk and location in relation to prospective clinical assessment of foot shape and mobility among persons with diabetes.

PubMed

Cowley, Matthew S; Boyko, Edward J; Shofer, Jane B; Ahroni, Jessie H; Ledoux, William R

2008-11-01

We assessed baseline clinical foot shape for 2939 feet of diabetic subjects who were monitored prospectively for foot ulceration. Assessments included hammer/claw toes, hallux valgus, hallux limitus, prominent metatarsal heads, bony prominences, Charcot deformity, plantar callus, foot type, muscle atrophy, ankle and hallux mobility, and neuropathy. Risk factors were linked to ulcer occurrence and location via a Cox proportional hazards model. Hammer/claw toes (hazard ratio [HR] (95% confidence interval [CI])=1.43 (1.06, 1.94) p=0.02), marked hammer/claw toes (HR=1.77 (1.18, 2.66) p=0.006), bony prominences (HR=1.38 (1.02, 1.88), p=0.04), and foot type (Charcot or drop foot vs. neutrally aligned) (HR=2.34 (1.33, 4.10), p=0.003) were significant risk factors for ulceration adjusting for age, body mass index, insulin medication, ulcer history and amputation history. With adjustment for neuropathy only hammer/claw toes (HR=1.40 (1.03, 1.90), p=0.03) and foot type (HR=1.76 (1.04, 3.04), p=0.05) were significantly related to ulceration. However, there was no relationship between ulcer location and foot deformity. Certain foot deformities were predictive of ulceration, although there was no relationship between clinical foot deformity and ulcer location.

Design and Analysis of a Forging Die for Manufacturing of Multiple Connecting Rods

NASA Astrophysics Data System (ADS)

Megharaj, C. E.; Nagaraj, P. M.; Jeelan Pasha, K.

2016-09-01

This paper demonstrates to utilize the hammer capacity by modifying the die design such that forging hammer can manufacture more than one connecting rod in a given forging cycle time. To modify the die design study is carried out to understand the parameters that are required for forging die design. By considering these parameters, forging die is designed using design modelling tool solid edge. This new design now can produce two connecting rods in same capacity hammer. The new design is required to validate by verifying complete filing of metal in die cavities without any defects in it. To verify this, analysis tool DEFORM 3D is used in this project. Before start of validation process it is require to convert 3D generated models in to. STL file format to import the models into the analysis tool DEFORM 3D. After importing these designs they are analysed for material flow into the cavities and energy required to produce two connecting rods in new forging die design. It is found that the forging die design is proper without any defects and also energy graph shows that the forging energy required to produce two connecting rods is within the limit of that hammer capacity. Implementation of this project increases the production of connecting rods by 200% in less than previous cycle time.

Subsurface sediment contamination during borehole drilling with an air-actuated down-hole hammer.

PubMed

Malard, Florian; Datry, Thibault; Gibert, Janine

2005-10-01

Drilling methods can severely alter physical, chemical, and biological properties of aquifers, thereby influencing the reliability of water samples collected from groundwater monitoring wells. Because of their fast drilling rate, air-actuated hammers are increasingly used for the installation of groundwater monitoring wells in unconsolidated sediments. However, oil entrained in the air stream to lubricate the hammer-actuating device can contaminate subsurface sediments. Concentrations of total hydrocarbons, heavy metals (Cu, Ni, Cr, Zn, Pb, and Cd), and nutrients (particulate organic carbon, nitrogen, and phosphorus) were measured in continuous sediment cores recovered during the completion of a 26-m deep borehole drilled with a down-hole hammer in glaciofluvial deposits. Total hydrocarbons, Cu, Ni, Cr and particulate organic carbon (POC) were all measured at concentrations far exceeding background levels in most sediment cores. Hydrocarbon concentration averaged 124 +/- 118 mg kg(-1) dry sediment (n = 78 samples) with peaks at depths of 8, 14, and 20 m below the soil surface (maximum concentration: 606 mg kg(-1)). The concentrations of hydrocarbons, Cu, Ni, Cr, and POC were positively correlated and exhibited a highly irregular vertical pattern, that probably reflected variations in air loss within glaciofluvial deposits during drilling. Because the penetration of contaminated air into the formation is unpreventable, the representativeness of groundwater samples collected may be questioned. It is concluded that air percussion drilling has strong limitations for well installation in groundwater quality monitoring surveys.

Regulating and coping with distress during police interviews of traumatized victims.

PubMed

Risan, Patrick; Binder, Per-Einar; Milne, Rebecca

2016-11-01

The aim of this study was to qualitatively explore approaches to police interviewing of traumatized victims experiencing distress. Specifically, we examined the research question: What do police investigators regard as useful approaches to regulating distress, maintaining rapport and promoting the well-being of the interviewee? To explore processes relevant to the research objective, 21 semistructured interviews were conducted of police investigators who interviewed survivors following the Utøya massacre on July 22, 2011 in Norway. To examine the relationship between the research question and the material, we used thematic analysis based on a reflexive hermeneutic-phenomenological epistemology. Following the analysis, 3 main themes emerged: (1) becoming aware of the interviewees' capacity to cope with distress by attending to nonverbal cues, (2) interviewers communicating acceptance and modeling how to cope with painful emotions, and, (3) regulating distress by responding to the interviewees' emotional needs, helping them to feel safe and promoting the positive. The findings of the study show the importance of relational processes in investigative interviewing of traumatized interviewees, particularly with regard to coping with emotions. The results suggest that if the police investigator who is conducting an investigative interview can offer a trusting, safe and compassionate relationship, or if he or she steers the relational dynamics toward safety in the present moment when distress arises, he or she may facilitate the regulation of distress. We propose that if the interviewee's emotions are managed in this way during the police interview, it may lead to increased rapport and promote psychological health. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Adults' recollections and perceptions of childhood caregiving to a parent with significant physical disability.

PubMed

Iezzoni, Lisa I; Wint, Amy J; Kuhlthau, Karen A; Boudreau, Alexy Arauz

2016-04-01

Caregiving roles of children <18 years of age living with parents with health conditions or disability have been studied extensively abroad, but little U.S. research has examined the caregiving activities and perceptions of children with parents with significant physical disability. To examine children's caregiving activities for their disabled parent, childhood perceptions of these activities, and adult views of this caregiving. We conducted 1-h, semi-structured, open-ended interviews with 20 persons age ≥21 years who as children (age < 18 years) had a parent with significant mobility disability. We used conventional content analysis to identify themes. Interviewees' mean (standard deviation) age was 36.7 (13.8) years; 4 were male. As children, most interviewees assisted their disabled parent with activities of daily living (ADLs) and instrumental ADLs; some children provided more medical supports. Several parents, especially of older interviewees, did not seek their children's care. Interviewees reported both positive and negative childhood attitudes about caregiving. Roughly half recalled as children feeling proud, special, or otherwise positively toward caregiving activities, while about one-third viewed caregiving as just part of their daily reality (i.e., simply needing to be done). Approximately half remembered also feeling resentful, primarily from time demands, insufficient appreciation, and being different from their peers. Interviewees reported gender and cultural factors affecting their caregiving roles and perceptions. Children can provide significant care to parents with physical disability. Understanding better their roles and perceptions could suggest ways to improve these experiences for both child and parent. Copyright © 2016 Elsevier Inc. All rights reserved.

Michael Ulsh | NREL

Science.gov Websites

Michael Ulsh Photo of Michael Ulsh Michael Ulsh Manufacturing R&D Project Lead Michael.Ulsh -line quality control, the study of the performance and durability effects of manufacturing defects, and lead for a multi-lab consortium on solution processing and roll-to-roll manufacturing, and is involved

Creating an Effective Multi-Domain Wide-Area Surveillance Platform to Enhance Border Security

DTIC Science & Technology

2008-03-01

SWOT ANALYSIS ........................................................................................43 I. ANALYSIS OF PROS AND CONS ...weaknesses and opportunities and SWOT analysis was also used to build pros and cons for the platform. All the interviewees liked unmanned platforms...because of the reduced night hour’s operations and SWOT analysis was also used to build pros and cons for the platform. All the interviewees really

The Auto-Gopher Deep Drill

NASA Technical Reports Server (NTRS)

Badescu, Mircea

2014-01-01

Subsurface penetration by coring, drilling or abrading is of great importance for a large number of space and earth applications. An Ultrasonic/Sonic Drill/Corer (USDC) has been in development at JPL's Nondestructive Evaluation and Advanced Actuators (NDEAA) lab as an adaptable tool for many of these applications. The USDC uses a novel drive mechanism to transform the high frequency ultrasonic or sonic vibrations of the tip of a horn into a lower frequency sonic hammering of a drill bit through an intermediate free-flying mass. The USDC device idea has been implemented at various scales from handheld drills to large diameter coring devices. A series of computer programs that model the function and performance of the USDC device were developed and were later integrated into an automated modeling package. The USDC has also evolved from a purely hammering drill to a rotary hammer drill as the design requirements increased form small diameter shallow drilling to large diameter deep coring. A synthesis of the Auto-Gopher development is presented in this paper.

Energy based simulation of a Timoshenko beam in non-forced rotation. Influence of the piano hammer shank flexibility on the sound

NASA Astrophysics Data System (ADS)

Chabassier, Juliette; Duruflé, Marc

2014-12-01

A nonlinear model for a vibrating Timoshenko beam in non-forced unknown rotation is derived from the virtual work principle applied to a system of beam with mass at the end. The system represents a piano hammer shank coupled to a hammer head. An energy-based numerical scheme is then provided, obtained by non-classical approaches. A major difficulty for time discretization comes from the nonlinear behavior of the kinetic energy of the system. This new numerical scheme is then coupled to a global energy-preserving numerical solution for the whole piano. The obtained numerical simulations show that the pianistic touch clearly influences the spectrum of the piano sound of equally loud isolated notes. These differences do not come from a possible shock excitation on the structure, or from a changing impact point, or a “longitudinal rubbing motion” on the string, since neither of these features is modeled in our study.

Milling of rice grains. The degradation on three structural levels of starch in rice flour can be independently controlled during grinding.

PubMed

Tran, Thuy T B; Shelat, Kinnari J; Tang, Daniel; Li, Enpeng; Gilbert, Robert G; Hasjim, Jovin

2011-04-27

Whole polished rice grains were ground using cryogenic and hammer milling to understand the mechanisms of degradation of starch granule structure, whole (branched) molecular structure, and individual branches of the molecules during particle size reduction (grinding). Hammer milling caused greater degradation to starch granules than cryogenic milling when the grains were ground to a similar volume-median diameter. Molecular degradation of starch was not evident in the cryogenically milled flours, but it was observed in the hammer-milled flours with preferential cleavage of longer (amylose) branches. This can be attributed to the increased grain brittleness and fracturability at cryogenic temperatures, reducing the mechanical energy required to diminish the grain size and thus reducing the probability of chain scission. The results indicate, for the first time, that branching, whole molecule, and granule structures of starch can be independently altered by varying grinding conditions, such as grinding force and temperature.

Research on natural frequency based on modal test for high speed vehicles

NASA Astrophysics Data System (ADS)

Ma, Guangsong; He, Guanglin; Guo, Yachao

2018-04-01

High speed vehicle as a vibration system, resonance generated in flight may be harmful to high speed vehicles. It is possible to solve the resonance problem by acquiring the natural frequency of the high-speed aircraft and then taking some measures to avoid the natural frequency of the high speed vehicle. Therefore, In this paper, the modal test of the high speed vehicle was carried out by using the running hammer method and the PolyMAX modal parameter identification method. Firstly, the total frequency response function, coherence function of the high speed vehicle are obtained by the running hammer stimulation test, and through the modal assurance criterion (MAC) to determine the accuracy of the estimated parameters. Secondly, the first three order frequencies, the pole steady state diagram of the high speed vehicles is obtained by the PolyMAX modal parameter identification method. At last, the natural frequency of the vibration system was accurately obtained by the running hammer method.

KSC-99pp0837

NASA Image and Video Library

1999-07-16

At a special presentation in the IMAX 2 Theater in the Kennedy Space Center Visitor Complex, the Hammer Award is presented to Kennedy Space Center and the 45th Space Wing. Present for the awards are (left to right) Commander of the Air Force Space Command General Richard B. Myers, Ed Gormel, Chris Fairey, NASA Administrator Daniel Goldin, and Director of the National Partnership for Reinventing Government, Morley Winograd, who presented the award. The Hammer Award is Vice President Al Gore's special recognition of teams of federal employees who have made significant contributions in support of the principles of the National Partnership for Reinventing Government. This Hammer Award acknowledges the accomplishments of a joint NASA and Air Force team that established the Joint Base Operations and Support Contract (J-BOSC) Source Evaluation Board (SEB). Gormel and Fairey are co-chairs of the SEB. The team developed and implemented the acquisition strategy for establishing a single set of base operations and support service requirements for KSC, Cape Canaveral Air Station and Patrick Air Force Base

Method and apparatus for subsurface exploration

NASA Technical Reports Server (NTRS)

Wilcox, Brian (Inventor)

2002-01-01

A subsurface explorer (SSX) for exploring beneath the terrestrial surface of planetary bodies such as the Earth, Mars, or comets. This exploration activity utilizes appropriate sensors and instrument to evaluate the composition, structure, mineralogy and possibly biology of the subsurface medium, as well as perhaps the ability to return samples of that medium back to the surface. The vehicle comprises an elongated skin or body having a front end and a rear end, with a nose piece at the front end for imparting force to composition material of the planetary body. Force is provided by a hammer mechanism to the back side of a nose piece from within the body of the vehicle. In the preferred embodiment, a motor spins an intermediate shaft having two non-uniform threads along with a hammer which engages these threads with two conical rollers. A brake assembly halts the rotation of the intermediate shaft, causing the conical roller to spin down the non-uniform thread to rapidly and efficiently convert the rotational kinetic energy of the hammer into translational energy.

Numerical simulation of water hammer in low pressurized pipe: comparison of SimHydraulics and Lax-Wendroff method with experiment

NASA Astrophysics Data System (ADS)

Himr, D.

2013-04-01

Article describes simulation of unsteady flow during water hammer with two programs, which use different numerical approaches to solve ordinary one dimensional differential equations describing the dynamics of hydraulic elements and pipes. First one is Matlab-Simulink-SimHydraulics, which is a commercial software developed to solve the dynamics of general hydraulic systems. It defines them with block elements. The other software is called HYDRA and it is based on the Lax-Wendrff numerical method, which serves as a tool to solve the momentum and continuity equations. This program was developed in Matlab by Brno University of Technology. Experimental measurements were performed on a simple test rig, which consists of an elastic pipe with strong damping connecting two reservoirs. Water hammer is induced with fast closing the valve. Physical properties of liquid and pipe elasticity parameters were considered in both simulations, which are in very good agreement and differences in comparison with experimental data are minimal.

Analysis on shock wave speed of water hammer of lifting pipes for deep-sea mining

NASA Astrophysics Data System (ADS)

Zhou, Zhi-jin; Yang, Ning; Wang, Zhao

2013-04-01

Water hammer occurs whenever the fluid velocity in vertical lifting pipe systems for deep-sea mining suddenly changes. In this work, the shock wave was proven to play an important role in changing pressures and periods, and mathematical and numerical modeling technology was presented for simulated transient pressure in the abnormal pump operation. As volume concentrations were taken into account of shock wave speed, the experiment results about the pressure-time history, discharge-time history and period for the lifting pipe system showed that: as its concentrations rose up, the maximum transient pressure went down, so did its discharges; when its volume concentrations increased gradually, the period numbers of pressure decay were getting less and less, and the corresponding shock wave speed decreased. These results have highly coincided with simulation results. The conclusions are important to design lifting transporting system to prevent water hammer in order to avoid potentially devastating consequences, such as damage to components and equipment and risks to personnel.

Improved ATLAS HammerCloud Monitoring for Local Site Administration

NASA Astrophysics Data System (ADS)

Böhler, M.; Elmsheuser, J.; Hönig, F.; Legger, F.; Mancinelli, V.; Sciacca, G.

2015-12-01

Every day hundreds of tests are run on the Worldwide LHC Computing Grid for the ATLAS, and CMS experiments in order to evaluate the performance and reliability of the different computing sites. All this activity is steered, controlled, and monitored by the HammerCloud testing infrastructure. Sites with failing functionality tests are auto-excluded from the ATLAS computing grid, therefore it is essential to provide a detailed and well organized web interface for the local site administrators such that they can easily spot and promptly solve site issues. Additional functionality has been developed to extract and visualize the most relevant information. The site administrators can now be pointed easily to major site issues which lead to site blacklisting as well as possible minor issues that are usually not conspicuous enough to warrant the blacklisting of a specific site, but can still cause undesired effects such as a non-negligible job failure rate. This paper summarizes the different developments and optimizations of the HammerCloud web interface and gives an overview of typical use cases.

Oral chemotherapy in paediatric oncology in the UK: problems, perceptions and information needs of parents.

PubMed

Christiansen, Nanna; Taylor, Kevin M G; Duggan, Catherine

2008-10-01

To identify problems, perceptions and information needs of parents and carers regarding oral chemotherapy. Two Paediatric Oncology Centres in the UK. A semi-structured questionnaire was developed in consultation with professionals working within paediatric oncology. Questionnaires were administered in face-to-face interviews with parents of patients attending clinic appointments. Responses to questions were coded and entered into a database for descriptive and inferential analyses. Responses to open questions were coded using simple thematic analysis whereby codes and themes emerged from the data and were compared and contrasted between respondents. Findings were further validated by quotes from interviewees to open questions. Awareness and knowledge of medicines, information needs and handling procedures. Fifty-five interviews were conducted. Most interviewees viewed oral and intravenous chemotherapy as equally important and potent. Three-quarters of parents were aware of the adverse effects chemotherapy could have on them, worryingly three-quarters of the same group of parents did not use all the handling precaution methods advised by health care professionals. Knowledge of acute lymphoblastic leukaemia maintenance treatment was assessed in 47 interviewees; 31 parents were able to explain the reasons for maintenance chemotherapy. Interviewees felt well informed by the hospital and found it easy to access information they needed. The data suggest the majority of parents had a great interest in understanding the disease and treatment, with 91% using the internet to access further information. Three-quarters of parents faced some kind of difficulty when dealing with oral chemotherapy, including problems with the patient not taking the drug, technical and supply problems and problems following the drug regimen. Self-reported compliance in this study was high with 69.1% of interviewees stating they never forgot a single dose. 72.2% of interviewees used a reminder method, of which 81.6% were written reminders. This study highlights that although the support systems offered by the paediatric oncology centres were good, certain areas need improvement, specifically the manner in which parents/carers are educated and informed.

Dynamic Brazilian Test of Rock Under Intermediate Strain Rate: Pendulum Hammer-Driven SHPB Test and Numerical Simulation

NASA Astrophysics Data System (ADS)

Zhu, W. C.; Niu, L. L.; Li, S. H.; Xu, Z. H.

2015-09-01

The tensile strength of rock subjected to dynamic loading constitutes many engineering applications such as rock drilling and blasting. The dynamic Brazilian test of rock specimens was conducted with the split Hopkinson pressure bar (SHPB) driven by pendulum hammer, in order to determine the indirect tensile strength of rock under an intermediate strain rate ranging from 5.2 to 12.9 s-1, which is achieved when the incident bar is impacted by pendulum hammer with different velocities. The incident wave excited by pendulum hammer is triangular in shape, featuring a long rising time, and it is considered to be helpful for achieving a constant strain rate in the rock specimen. The dynamic indirect tensile strength of rock increases with strain rate. Then, the numerical simulator RFPA-Dynamics, a well-recognized software for simulating the rock failure under dynamic loading, is validated by reproducing the Brazilian test of rock when the incident stress wave retrieved at the incident bar is input as the boundary condition, and then it is employed to study the Brazilian test of rock under the higher strain rate. Based on the numerical simulation, the strain-rate dependency of tensile strength and failure pattern of the Brazilian disc specimen under the intermediate strain rate are numerically simulated, and the associated failure mechanism is clarified. It is deemed that the material heterogeneity should be a reason for the strain-rate dependency of rock.

On the prediction of impact noise, V: The noise from drop hammers

NASA Astrophysics Data System (ADS)

Richards, E. J.; Carr, I.; Westcott, M.

1983-06-01

In earlier papers in this series, the concepts of "acceleration" and "ringing" noise have been studied in relation to impact machines, and values of radiation efficiency have been obtained for the various types of structural components. In the work reported in this paper the predicted and measured noise radiation from a drop hammer, both in full-scale and in {1}/{3}- scale model form, were examined. It is found that overall noise levels ( Leq per event) can be predicted from vibration measurements to within ± 1·5 dB, and to within ±2·5 dB in one-third octave bands. In turn this has permitted noise reduction techniques to be examined by studies of local component vibration levels rather than overall noise, a method which provides considerable enlightenment at the design stage. It is shown that on one particular drop hammer, the noise energy is shared surprisingly uniformly over four or five sources, and that when these have been reduced, the overall noise reduction is severely limited by the "acceleration" noise from the "tup" or "hammer" itself. As this is difficult to eliminate without a basic change in forging technology, it follows that "tup" enclosure or modification of the sharpness of the final "hard" impact are the only means available for any serious noise reduction. Also indicated is the reliability of using model techniques, suitably scaled in frequency and impulse magnitude, in developing machinery with impact characteristics.

The Marble-Hand Illusion

PubMed Central

Senna, Irene; Maravita, Angelo; Bolognini, Nadia; Parise, Cesare V.

2014-01-01

Our body is made of flesh and bones. We know it, and in our daily lives all the senses constantly provide converging information about this simple, factual truth. But is this always the case? Here we report a surprising bodily illusion demonstrating that humans rapidly update their assumptions about the material qualities of their body, based on their recent multisensory perceptual experience. To induce a misperception of the material properties of the hand, we repeatedly gently hit participants' hand with a small hammer, while progressively replacing the natural sound of the hammer against the skin with the sound of a hammer hitting a piece of marble. After five minutes, the hand started feeling stiffer, heavier, harder, less sensitive, unnatural, and showed enhanced Galvanic skin response (GSR) to threatening stimuli. Notably, such a change in skin conductivity positively correlated with changes in perceived hand stiffness. Conversely, when hammer hits and impact sounds were temporally uncorrelated, participants did not spontaneously report any changes in the perceived properties of the hand, nor did they show any modulation in GSR. In two further experiments, we ruled out that mere audio-tactile synchrony is the causal factor triggering the illusion, further demonstrating the key role of material information conveyed by impact sounds in modulating the perceived material properties of the hand. This novel bodily illusion, the ‘Marble-Hand Illusion', demonstrates that the perceived material of our body, surely the most stable attribute of our bodily self, can be quickly updated through multisensory integration. PMID:24621793

Propellant-Flow-Actuated Rocket Engine Igniter

NASA Technical Reports Server (NTRS)

Wollen, Mark

2013-01-01

A rocket engine igniter has been created that uses a pneumatically driven hammer that, by specialized geometry, is induced into an oscillatory state that can be used to either repeatedly impact a piezoelectric crystal with sufficient force to generate a spark capable of initiating combustion, or can be used with any other system capable of generating a spark from direct oscillatory motion. This innovation uses the energy of flowing gaseous propellant, which by means of pressure differentials and kinetic motion, causes a hammer object to oscillate. The concept works by mass flows being induced through orifices on both sides of a cylindrical tube with one or more vent paths. As the mass flow enters the chamber, the pressure differential is caused because the hammer object is supplied with flow on one side and the other side is opened with access to the vent path. The object then crosses the vent opening and begins to slow because the pressure differential across the ball reverses due to the geometry in the tube. Eventually, the object stops because of the increasing pressure differential on the object until all of the kinetic energy has been transferred to the gas via compression. This is the point where the object reverses direction because of the pressure differential. This behavior excites a piezoelectric crystal via direct impact from the hammer object. The hammer strikes a piezoelectric crystal, then reverses direction, and the resultant high voltage created from the crystal is transferred via an electrode to a spark gap in the ignition zone, thereby providing a spark to ignite the engine. Magnets, or other retention methods, might be employed to favorably position the hammer object prior to start, but are not necessary to maintain the oscillatory behavior. Various manifestations of the igniter have been developed and tested to improve device efficiency, and some improved designs are capable of operation at gas flow rates of a fraction of a gram per second (0.001 lb/s) and pressure drops on the order of 30 to 50 kilopascal (a few psi). An analytical model has been created and tested in conjunction with a precisely calibrated reference model. The analytical model accurately captures the overall behavior of this innovation. The model is a simple "volume-orifice" concept, with each chamber considered a single temperature and pressure "node" connected to adjacent nodes, or to vent paths through flow control orifices. Mass and energy balances are applied to each node, with gas flow predicted using simple compressible flow equations.

Reasons and remedies for under-representation of women in medical leadership roles: a qualitative study from Australia

PubMed Central

Bismark, Marie; Morris, Jennifer; Thomas, Laura; Loh, Erwin; Phelps, Grant; Dickinson, Helen

2015-01-01

Objective To elicit medical leaders’ views on reasons and remedies for the under-representation of women in medical leadership roles. Design Qualitative study using semistructured interviews with medical practitioners who work in medical leadership roles. Interviews were transcribed verbatim and transcripts were analysed using thematic analysis. Setting Public hospitals, private healthcare providers, professional colleges and associations and government organisations in Australia. Participants 30 medical practitioners who hold formal medical leadership roles. Results Despite dramatic increases in the entry of women into medicine in Australia, there remains a gross under-representation of women in formal, high-level medical leadership positions. The male-dominated nature of medical leadership in Australia was widely recognised by interviewees. A small number of interviewees viewed gender disparities in leadership roles as a ‘natural’ result of women's childrearing responsibilities. However, most interviewees believed that preventable gender-related barriers were impeding women's ability to achieve and thrive in medical leadership roles. Interviewees identified a range of potential barriers across three broad domains—perceptions of capability, capacity and credibility. As a counter to these, interviewees pointed to a range of benefits of women adopting these roles, and proposed a range of interventions that would support more women entering formal medical leadership roles. Conclusions While women make up more than half of medical graduates in Australia today, significant barriers restrict their entry into formal medical leadership roles. These constraints have internalised, interpersonal and structural elements that can be addressed through a range of strategies for advancing the role of women in medical leadership. These findings have implications for individual medical practitioners and health services, as well as professional colleges and associations. PMID:26576814

Rationing in the emergency department: the good, the bad, and the unacceptable.

PubMed

Cross, E; Goodacre, S; O'Cathain, A; Arnold, J

2005-03-01

Waiting times in emergency departments (EDs) are an important government priority. Although substantial efforts are currently being made to reduce waiting times, little attention has been paid to the patients' view. We used qualitative methods to explore patients' perspectives on waiting times and other approaches to rationing and prioritisation. Face to face, in depth, qualitative interviews (n = 11) explored how patients valued waiting times for non-urgent ED care. The framework approach (identifying a thematic framework through repeated re-reading) was used to analyse transcripts. Interviewees found some forms of rationing and prioritisation acceptable. They expected rationing by delay, but required explanations or information on the reason for their wait. They valued prioritisation by triage (rationing by selection) and thought that this role could be expanded for the re-direction of non-urgent patients elsewhere (rationing by deflection). Interviewees were mainly unwilling or unable to engage in prioritisation of different types of patients, openly prioritising only those with obvious clinical need, and children. However, some interviewees were willing to ration implicitly, labelling some attenders as inappropriate, such as those causing a nuisance. Others felt it was unacceptable to blame "inappropriate" attenders, as their attendance may relate to lack of information or awareness of service use. Explicit rationing between services was not acceptable, although some believed there were more important priorities for NHS resources than ED waiting times. Interviewees disagreed with the hypothetical notion of paying to be seen more quickly in the ED (rationing by charging). Interviewees expected to wait and accepted the need for prioritisation, although they were reluctant to engage in judgements regarding prioritisation. They supported the re-direction of patients with certain non-urgent complaints. However, they perceived a need for more explanation and information about their wait, the system, and alternative services.

Process for making diamonds

NASA Technical Reports Server (NTRS)

Rasquin, J. R.; Estes, M. F. (Inventor)

1973-01-01

A description is given of a device and process for making industrial diamonds. The device is composed of an exponential horn tapering from a large end to a small end, with a copper plate against the large end. A magnetic hammer abuts the copper plate. The copper plate and magnetic hammer function together to create a shock wave at the large end of the horn. As the wave propagates to the small end, the extreme pressure and temperature caused by the wave transforms the graphite, present in an anvil pocket at the small end, into diamonds.

How to HAMMER home hazardous materials training

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ollero, J.

1994-10-01

This article describes HAMMER - the Hazardous Materials Management and Emergency Response Training - program being developed at the Hanford Reservation. The program uses true-to-life props and facilities to simulate emergencies and hazardous conditions. Topics covered include the set-up of the facility and training; the demand for such training; the involvement of the Army Corps of Engineers; the props to be constructed; the educational involvement of Tulane and Xavier Univerisities of Louisiana; temporary facility for the program; partnership with Indian Nations and Stakeholders; and budget plans and constriction. 9 figs.

Noise Control: Pile Driver Demonstration Project, Waterloo, Iowa.

DTIC Science & Technology

1981-07-01

SCHOMER CERL-08684--00-10 UNCLASSIFIED CERL-TR-N-111 Na MEuuIllllImN IiMMEIIMMMM . i ljj.25 fL l1. MICROCOP )IY RLSOUtiION TLSI CIIARi construction Unte...cycle the hammer is assisted by steam or air pressure, the hammer is called "double-acting," " compound ," or "differential" according to its specific... compound was applied in an unconstrained form in rings about 0.025 m (1 in.) thick at 2.4-m (8-ft.) intervals on the piles. As discussed in a later

Vertebrobasilar Dolichoectasia Induced Hydrocephalus: the Water-Hammer Effect

PubMed Central

Zisimopoulou, Vaso; Ntouniadaki, Aikaterini; Aggelidakis, Panagiotis; Siatouni, Anna; Gatzonis, Stylianos; Tavernarakis, Antonios

2015-01-01

Vertebrobasilar dolichoectasia is a clinical entity associated rarely with obstructive hydrocephalus. We present a 48-year old male with a profound dilatation of the ventricular system due to a dolichoectatic basilar artery, as appeared in imaging studies. The patient suffered from longstanding hydrocephalus and presenile dementia. The underlying mechanism for obstructive hydrocephalus due to vertebrobasilar dolichoectasia is considered to be both a water-hammer effect and a direct compression of adjacent structures. We suggest prompt surgical intervention upon diagnosis as a first choice treatment in order to avoid further complications. PMID:26236456

Vertebrobasilar Dolichoectasia Induced Hydrocephalus: the Water-Hammer Effect.

PubMed

Zisimopoulou, Vaso; Ntouniadaki, Aikaterini; Aggelidakis, Panagiotis; Siatouni, Anna; Gatzonis, Stylianos; Tavernarakis, Antonios

2015-04-24

Vertebrobasilar dolichoectasia is a clinical entity associated rarely with obstructive hydrocephalus. We present a 48-year old male with a profound dilatation of the ventricular system due to a dolichoectatic basilar artery, as appeared in imaging studies. The patient suffered from longstanding hydrocephalus and presenile dementia. The underlying mechanism for obstructive hydrocephalus due to vertebrobasilar dolichoectasia is considered to be both a water-hammer effect and a direct compression of adjacent structures. We suggest prompt surgical intervention upon diagnosis as a first choice treatment in order to avoid further complications.

Enlargement of basilar artery aneurysms following balloon occlusion--"water-hammer effect". Report of two cases.

PubMed

Kwan, E S; Heilman, C B; Shucart, W A; Klucznik, R P

1991-12-01

Two patients with distal basilar aneurysms were treated with intra-aneurysmal balloon occlusion. After apparently successful therapy, follow-up angiograms demonstrated aneurysm enlargement with balloon migration distally in the sac. Geometric mismatch between the base of the balloons and the aneurysm neck together with transmitted pulsation through the 2-hydroxyl-ethylmethacrylate (HEMA)-filled balloon directly contributed to aneurysm enlargement. In this report, the authors discuss the problems of progressive aneurysm enlargement due to a "water-hammer effect" and the possibility of hemorrhage following subtotal occlusion.

Recommendations for a Standardized Program Management Office (PMO) Time Compliance Network Order (TCNO) Patching Process

DTIC Science & Technology

2007-03-01

self -reporting. The interview process and resulting data analysis may be impacted by research bias since both were conducted by the same individual...the processes you employ? Answer: 97 MAJCOM CONTACTS RESPOSIBLE FOR GENERAL TCNO PROCEDURES SECTION 1: INTERVIEWEE INFO Question 1: Please...BASE-LEVEL NCC CONTACTS RESPOSIBLE FOR GENERAL TCNO PROCEDURES SECTION 1: INTERVIEWEE INFO Question 1: Please provide your general job description

[Social intelligence deficits in autistic children and adolescents--subjective theories of psychosocial health care professionals].

PubMed

Krech, M; Probst, P

1998-10-01

The paper is concerned with personal theories of health care professionals about deficiencies in social intelligence of autistic persons. In the component-model of social intelligence means the ability of individuals or groups, to interact with each other in social situations. This contains social perception, social behavior as well as social conceptions and refers to emotional, cognitive and normative aspects. 33 interviewees, working as psychologists or teachers in kindergartens, schools or therapy institutions, are questioned by a half-standardized single interview concerning their beliefs about nonverbal social abilities, social perspective taking, and construction of a theory of mind in autistic persons. The major finding is: The impairments can be found in all aspects of social intelligence. Especially emotional handicaps, which are quoted by more than 80% of the interviewees, and low cognitive preconditions of mastering social stimuli, which are quoted by nearly all interviewees, are relevant. The subjective theories of the interviewees are in accordance to the models of parents as well as the models of the leading experts. The professional relationship to autistic persons and the practical experiences of the health care professionals lead to their specific personal theories of deficiencies in social intelligence of autistic people with wide consequences in respect to the professional contact with the autistic children and young adults.

"Functional foods compensate for an unhealthy lifestyle". Some Swedish consumers' impressions and perceived need of functional foods.

PubMed

Landström, Eva; Hursti, Ulla-Kaisa Koivisto; Magnusson, Maria

2009-08-01

The aim of the present study was to explore some Swedish consumers' impressions of and perceived need of functional foods. Data were collected through 10 focus groups. A total of 46 individuals participated (31 females, 18-75 years, and 16 males, 18-78 years). The interviews were transcribed verbatim and analysed by the use of content analysis. Uncertainties--e.g., if functional foods are normal foods or medicines, if the foods would give additional physiological effects and/or if the ingredients and substances could cause harm--caused questions among the interviewees of trustworthiness and a feeling of losing control. The interviewees debated on the necessity of functional foods. Apart from perceiving functional foods as unnatural, the interviewees thought that functional foods would falsely compensate for an unhealthy lifestyle. The use of functional foods was considered to be justified when a healthy lifestyle is incapable of improving people's health. The interviewees perceived themselves to be in no need of functional foods. They thought that the foods were meant for others, for those in unquestionable need. We conclude that the impressions of FF among Swedish consumers are complex and versatile. The necessity of FF was justified unless no other lifestyle changes were able to improve a person's state of health.

Prenatal HIV testing: the compartmentalization of women's sexual risk exposure and the return of the maternal fetal conflict.

PubMed

Kelly, Kristin; Hampson, Sarah Cote; Huff, Jamie

2012-01-01

The purpose of the researchers in this study was to investigate how women who were being tested for HIV during their pregnancies were evaluating, conceptualizing, and negotiating their risk of infection. The study included two focus groups and 20 in-depth interviews with 30 patients, ages 17-38 years, from diverse ethnic/racial, social, and economic backgrounds. Qualitative analyses of the interview transcripts revealed support for the idea that pregnant women have a responsibility to minimize risks to their fetus, with all interviewees describing actions to minimize those risks while pregnant. Two sub-themes emerged that were related to the presence of differences in how interviewees conceptualized risk depending on the type of risk being discussed. In the case of diet and lifestyle influences, interviewees framed their health and the health of the fetus as connected. In contrast, when the issue of HIV risk and testing was raised, the interviewees described the risk of HIV to themselves and their fetuses as separate concerns and, with few exceptions, reported no effort to reduce the risk of becoming infected while pregnant (beyond consenting to HIV screening while receiving prenatal care). Findings suggest the importance of developing HIV prevention messages that counter the compartmentalization of risk during pregnancy.

[Adam hammer (1818 - 1878) - remarks on a forgotten pioneer of ether anaesthesia in obstetrics].

PubMed

Goerig, M; Streckfuss, W

2004-05-01

Adam Hammer, born in 1818, and working as a doctor for the poor since 1847 in Mannheim, was the first person in the German speaking world to use ether for pain relief during labor on February 18th 1847. He took part in the abortive April 1848 Revolution in Mannheim - a pinnacle of German liberalism and later of political radicalism, which attented to abolish the Monarchy and introduce a democratic Republic. After the revolution was put down, Hammer emigrated to the United States and settled down in St. Louis, Missouri. Remaining politically active, he joined the Republican Party, founded in 1854 and served as a military surgeon in the Union Army during the American Civil War. Even before the war, he was engaged in efforts to improve the level of medical training in America and was involved with the foundation of High Schools which offered training courses along the lines of German universities. His ideas and innovations were not introduced immediately, but had a significant impact on medical training methology later on in the US. During a visit in Europe in 1876, he was the first to diagnose a coronary thombosis as the cause of a heart attack on a live patient. The diagnosis was later confirmed by post-morten autopsy on the patient. In 1877 he returned to Germany and died one year later. The biography of Adam Hammer mirrows that of many other German-Americans whose emigration proved to be a gain for America but a loss for Germany. This story was destinated to be repeated in terrible circumstances some decades later.

Long-term clinical outcomes in patients diagnosed with severe digital ischemia.

PubMed

Keo, Hong H; Umer, Melika; Baumgartner, Iris; Willenberg, Torsten; Gretener, Silvia B

2011-02-18

To investigate the aetiology and long-term clinical outcomes of patients diagnosed with digital ischemia. Data of 36 consecutive patients presenting with digital ischemia were collected in July 2000 to June 2001 from a vascular referral centre. Demographic data, aetiology, medication and treatment were abstracted from the medical records. Clinical outcomes were assessed at 5 year follow-up including ulcer healing, digital amputation and mortality. Of the 36 patients, 69.4% were male and the mean age was 55±14 years. In 15 patients (41.7%) a systemic disease was present and of those 53.3% was due to connective tissue disease. Twelve patients (33.3%) had hypothenar hammer syndrome and in 8 patients (22.2%) no apparent cause was found. Whereas 13 patients (36.1%) presented with rest pain or trophic lesions at baseline, no patients presented with these symptoms at follow-up. At follow-up, 18 (62.1%) patients had symptoms on provocation and 5 patients (4 patients with systemic disease and 1 with no apparent cause) had died. Digital amputation was performed in one patient at initial presentation and no digital amputation was performed at follow-up. No ulcer reoccurred and no workers' insurance compensation was applied. Of those with hypothenar hammer syndrome, 80.0% had symptoms on provocation at follow-up. Among patients with digital ischemia, systemic disease and hypothenar hammer syndrome were the most frequent aetiologies. In patients with hypothenar hammer syndrome the clinical outcome was remarkably benign, although symptoms may persist with provocation, whereas patients with systemic disease have a high mortality rate.

Confronting the Terrorism of Boko Haram in Nigeria

DTIC Science & Technology

2012-05-01

the blight of corruption greatly weakens the strands of trust between the state and the citizens it aims to govern. One interviewee used a medical ... medical doc- tors, scientists, and academics to leave their professions and go into politics just to make money. For example, as a May 2011 article in...nor a functioning insurance system in the country. As one interviewee recounted, “You can purchase medical , health, life, automobile or other kinds of

The Attitudes of Indian Palliative-care Nurses and Physicians to Pain Control and Palliative Sedation.

PubMed

Gielen, Joris; Gupta, Harmala; Rajvanshi, Ambika; Bhatnagar, Sushma; Mishra, Seema; Chaturvedi, Arvind K; den Branden, Stef Van; Broeckaert, Bert

2011-01-01

We wanted to assess Indian palliative-care nurses and physicians' attitudes toward pain control and palliative sedation. From May to September 2008, we interviewed 14 physicians and 13 nurses working in different palliative-care programs in New Delhi, using a semi-structured questionnaire, and following grounded-theory methodology (Glaser and Strauss). The interviewees did not consider administration of painkillers in large doses an ethical problem, provided the pain killers are properly titrated. Mild palliative sedation was considered acceptable. The interviewees disagreed whether palliative sedation can also be deep and continuous. Arguments mentioned against deep continuous palliative sedation were the conviction that it may cause unacceptable side effects, and impedes basic daily activities and social contacts. A few interviewees said that palliative sedation may hasten death. Due to fears and doubts regarding deep continuous palliative sedation, it may sometimes be too easily discarded as a treatment option for refractory symptoms.

Improving Non-Destructive Concrete Strength Tests Using Support Vector Machines

PubMed Central

Shih, Yi-Fan; Wang, Yu-Ren; Lin, Kuo-Liang; Chen, Chin-Wen

2015-01-01

Non-destructive testing (NDT) methods are important alternatives when destructive tests are not feasible to examine the in situ concrete properties without damaging the structure. The rebound hammer test and the ultrasonic pulse velocity test are two popular NDT methods to examine the properties of concrete. The rebound of the hammer depends on the hardness of the test specimen and ultrasonic pulse travelling speed is related to density, uniformity, and homogeneity of the specimen. Both of these two methods have been adopted to estimate the concrete compressive strength. Statistical analysis has been implemented to establish the relationship between hammer rebound values/ultrasonic pulse velocities and concrete compressive strength. However, the estimated results can be unreliable. As a result, this research proposes an Artificial Intelligence model using support vector machines (SVMs) for the estimation. Data from 95 cylinder concrete samples are collected to develop and validate the model. The results show that combined NDT methods (also known as SonReb method) yield better estimations than single NDT methods. The results also show that the SVMs model is more accurate than the statistical regression model. PMID:28793627

Nuts, nut cracking, and pitted stones at Gesher Benot Ya‘aqov, Israel

PubMed Central

Goren-Inbar, Naama; Sharon, Gonen; Melamed, Yoel; Kislev, Mordechai

2002-01-01

The Acheulian site of Gesher Benot Ya‘aqov (Israel) has revealed a unique association of edible nuts with pitted hammers and anvils. Located in the Dead Sea rift, on the boundary between the Arabian and African plates, the site dates to the Early-Middle Pleistocene, oxygen isotope stage 19. In a series of strata, seven species of nuts, most of which can be cracked open only by a hard hammer, were uncovered. Five of the species are extant terrestrial nuts, and two are aquatic nuts now extinct in the Levant. In addition, the site yielded an assemblage of pitted hammers and anvils similar in pit morphology to those used by chimpanzees and contemporary hunter–gatherers. This is the first time, to our knowledge, that a site has offered both paleobotanical and lithic evidence of plant foods eaten by early hominins and technologies used for processing these foods. The evidence also sheds light on the structure of the community: ethnographic analogies suggest that mixedgender groups may have been active on the shores of paleoLake Hula. PMID:11854536

KSC-99pp0839

NASA Image and Video Library

1999-07-16

At a special presentation of the Hammer Award in the IMAX 2 Theater in the Kennedy Space Center Visitor Complex, former Apollo astronauts Neil Armstrong (left) and Edwin "Buzz" Aldrin (second from right) applauded the recipients, Kennedy Space Center and the 45th Space Wing. The Hammer Award is Vice President Al Gore's special recognition of teams of federal employees who have made significant contributions in support of the principles of the National Partnership for Reinventing Government. This Hammer Award acknowledges the accomplishments of a joint NASA and Air Force team that established the Joint Base Operations and Support Contract (J-BOSC) Source Evaluation Board (SEB). Ed Gormel and Chris Fairey, co-chairs of the SEB, accepted the awards for the SEB. The team developed and implemented the acquisition strategy for establishing a single set of base operations and support service requirements for KSC, Cape Canaveral Air Station and Patrick Air Force Base. Armstrong and Aldrin were at KSC to attend a banquet and other activities for the 30th anniversary of the Apollo 11 mission, which landed the first man on the moon

The Learning Preferences of Applicants Who Interview for General Surgery Residency: A Multiinstitutional Study.

PubMed

Kim, Roger H; Kurtzman, Scott H; Collier, Ashley N; Shabahang, Mohsen M

Learning styles theory posits that learners have distinct preferences for how they assimilate new information. The VARK model categorizes learners based on combinations of 4 learning preferences: visual (V), aural (A), read/write (R), and kinesthetic (K). A previous single institution study demonstrated that the VARK preferences of applicants who interview for general surgery residency are different from that of the general population and that learning preferences were associated with performance on standardized tests. This multiinstitutional study was conducted to determine the distribution of VARK preferences among interviewees for general surgery residency and the effect of those preferences on United States Medical Licensing Examination (USMLE) scores. The VARK learning inventory was administered to applicants who interviewed at 3 general surgery programs during the 2014 to 2015 academic year. The distribution of VARK learning preferences among interviewees was compared with that of the general population of VARK respondents. Performance on USMLE Step 1 and Step 2 Clinical Knowledge was analyzed for associations with VARK learning preferences. Chi-square, analysis of variance, and Dunnett's test were used for statistical analysis, with p < 0.05 considered statistically significant. The VARK inventory was completed by a total of 140 residency interviewees. Sixty-four percent of participants were male, and 41% were unimodal, having a preference for a single learning modality. The distribution of VARK preferences of interviewees was different than that of the general population (p = 0.02). By analysis of variance, there were no overall differences in USMLE Step 1 and Step 2 Clinical Knowledge scores by VARK preference (p = 0.06 and 0.21, respectively). However, multiple comparison analysis using Dunnett's test revealed that interviewees with R preferences had significantly higher scores than those with multimodal preferences on USMLE Step 1 (239 vs. 222, p = 0.02). Applicants who interview for general surgery residency have a different pattern of VARK preferences than that of the general population. Interviewees with preferences for read/write learning modalities have higher scores on the USMLE Step 1 than those with multimodal preferences. Learning preferences may have impact on residency applicant selection and represents a topic that warrants further investigation. Copyright © 2016 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

What can we learn from trial decliners about improving recruitment? Qualitative study.

PubMed

Hughes-Morley, Adwoa; Young, Bridget; Hempel, Roelie J; Russell, Ian T; Waheed, Waquas; Bower, Peter

2016-10-12

Trials increasingly experience problems in recruiting participants. Understanding the causes of poor recruitment is critical to developing solutions. We interviewed people who had declined a trial of an innovative psychological therapy for depression (REFRAMED) about their response to the trial invitation, in order to understand their decision and identify ways to improve recruitment. Of 214 people who declined the trial, 35 (16 %) gave permission to be contacted about a qualitative study to explore their decision. Analysis of transcripts of semi-structured interviews was informed by grounded theory. We interviewed 20 informants: 14 women and six men, aged 18 to 77 years. Many interviewees had prior experience of research participation and positive views of the trial. Interviewees' decision making resembled a four-stage sequential process; in each stage they either decided not to participate in the trial or progressed to the next stage. In stage 1, interviewees assessed the invitation in the context of their experiences and attitudes; we term those who opted out at this stage 'prior decliners' as they had an established position of declining trials. In stage 2, interviewees assessed their own eligibility; those who judged themselves ineligible and opted out at this stage are termed 'self-excluders'. In stage 3, interviewees assessed their need for the trial therapy and potential to benefit; we term those who decided they did not need the trial therapy and opted out at this stage 'treatment decliners'. In stage 4, interviewees deliberated the benefits and costs of trial participation; those who opted out after judging that disadvantages outweighed advantages are termed 'trial decliners'. Across all stages, most individuals declined because they judged themselves ineligible or not in need of the trial therapy. While 'prior decliners' are unlikely to respond to any trial recruitment initiative, the factors leading others to decline are amenable to amelioration as they do not arise from a rejection of trials or a personal stance. To improve recruitment in similar trials, the most successful interventions are likely to address patients' assessments of their eligibility and their potential to benefit from the trial treatment, rather than reducing trial burden. International Standard Randomised Controlled Trial Number: ISRCTN85784627 . Registration date 10 August 2011.

76 FR 55904 - Michael J. Donahue; Notice of Termination of Exemption By Implied Surrender and Soliciting...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-09

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 6649-008] Michael J.... Date Initiated: September 1, 2011. d. Exemptee: Michael J. Donahue. e. Name and Location of Project.... Initiated Pursuant to: 18 CFR 4.106. g. Exemptee Contact Information: Mr. Michael J. Donahue, Route 3, Box...

76 FR 58264 - Michael J. Donahue; Notice of Termination of Exemption by Implied Surrender and Soliciting...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-20

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 6649-008] Michael J.... Date Initiated: September 13, 2011. d. Exemptee: Michael J. Donahue. e. Name and Location of Project.... Initiated Pursuant to: 18 CFR 4.106. g. Exemptee Contact Information: Mr. Michael J. Donahue, Route 3, Box...

75 FR 62635 - Proposed Information Collection (Patient Satisfaction Survey Michael E. DeBakey Home Care Program...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-12

... Collection (Patient Satisfaction Survey Michael E. DeBakey Home Care Program) Activity: Comment Request... determine patients' satisfaction with services provided by or through the Michael E. DeBakey Home Care...: Patient Satisfaction Survey Michael E. DeBakey Home Care Program, VA Form 10-0476. OMB Control Number...

77 FR 69550 - Proposed Information Collection (Patient Satisfaction Survey Michael E. DeBakey Home Care Program...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-19

... (Patient Satisfaction Survey Michael E. DeBakey Home Care Program) Activity: Comment Request AGENCY... information needed to determine patients' satisfaction with services provided by or through the Michael E...: Patient Satisfaction Survey Michael E. DeBakey Home Care Program, VA Form 10-0476. OMB Control Number...

Strength trapped within weakness/ weakness trapped within strength: the influence of family of origin experiences on the lives of abused women.

PubMed

Buchbinder, Eli; Birnbaum, Liora

2010-06-01

By conceptualizing abused women as victims or survivors, the literature offers two contradictory narratives of abused women. The aim of this article is to show that these two narratives are not mutually exclusive but rather can be used simultaneously to represent battered women's existential experiences. The study sample was comprised of 20 Israeli battered women. Three in-depth interviews were conducted with each participant-twice for data collection purposes and once for validating the themes that emerged from the content analysis. "Strength trapped in weakness/weakness trapped in strength" was found to be a dominant theme in the life narratives of the interviewees. Most interviewees grew up in families of origin in distress; most were abused physically and emotionally. Although this anguish colored their lives with pain and turmoil, their experiences were the key to their ability to overcome difficulties. From the onset, interviewees' lives were marked by a sense of threat and deprivation, but these very difficulties were also the source of a sense of power that emerged from the women's struggle with their past. In their attempts to cope with and transcend the legacies of their past, interviewees' feelings oscillated continuously between past and present, creating a unique powerful sense of simultaneously being victims and survivors. Implications for intervention are suggested.

"And now for the good news..." the impact of negative and positive messages in self-management education for people with Type 2 diabetes: A qualitative study in an ethnically diverse population.

PubMed

Eborall, Helen C; Virdee, Satnam K; Patel, Naina; Redwood, Sabi; Greenfield, Sheila M; Stone, Margaret A

2016-03-01

To explore the impact of Diabetes Education and Self Management for Ongoing and Newly Diagnosed (DESMOND) Foundation education, particularly from interviewees' narratives regarding recall of good and bad news messages and behaviour changes. In-depth, semi-structured interviews were conducted with a purposive sample (n=19) of people who had attended education sessions as part of a randomised controlled trial in two UK sites with ethnically diverse populations. Data collection and analysis were informed by the constant comparative approach and facilitated through charting. Findings were similar in people from different ethnic backgrounds. Exploration of levels of recall of the sessions suggested that this was variable and sometimes very limited, but that interviewees had all assimilated some relevant learning. Key themes emerged relating to the way in which interviewees recalled and had been influenced by positive (good news) and negative (bad news) messages within the education sessions, including biomedical explanations. Both types of message appeared to have an important role in terms of motivation to change behaviour, but a notable observation was that none of the interviewees recalled receiving bad news messages when diagnosed. Our findings have highlighted the importance of providing and combining both negative and positive messages within education designed to promote self-management behaviour change. © The Author(s) 2015.

Maniac Talk - Michael Mishchenko

NASA Image and Video Library

2015-01-26

Michael Mishchenko Maniac Lecture, January 26, 2015 NASA climate scientist Dr. Michael I. Mishchenko presented a Maniac Talk entitled "How much first-principle physics do we need in remote-sensing and atmospheric-radiation research." Michael explained his skepticism and how it has shaped his contributions to the disciplines of electromagnetic scattering, radiative transfer, and remote sensing, which have found widespread use.

Reasons and remedies for under-representation of women in medical leadership roles: a qualitative study from Australia.

PubMed

Bismark, Marie; Morris, Jennifer; Thomas, Laura; Loh, Erwin; Phelps, Grant; Dickinson, Helen

2015-11-16

To elicit medical leaders' views on reasons and remedies for the under-representation of women in medical leadership roles. Qualitative study using semistructured interviews with medical practitioners who work in medical leadership roles. Interviews were transcribed verbatim and transcripts were analysed using thematic analysis. Public hospitals, private healthcare providers, professional colleges and associations and government organisations in Australia. 30 medical practitioners who hold formal medical leadership roles. Despite dramatic increases in the entry of women into medicine in Australia, there remains a gross under-representation of women in formal, high-level medical leadership positions. The male-dominated nature of medical leadership in Australia was widely recognised by interviewees. A small number of interviewees viewed gender disparities in leadership roles as a 'natural' result of women's childrearing responsibilities. However, most interviewees believed that preventable gender-related barriers were impeding women's ability to achieve and thrive in medical leadership roles. Interviewees identified a range of potential barriers across three broad domains-perceptions of capability, capacity and credibility. As a counter to these, interviewees pointed to a range of benefits of women adopting these roles, and proposed a range of interventions that would support more women entering formal medical leadership roles. While women make up more than half of medical graduates in Australia today, significant barriers restrict their entry into formal medical leadership roles. These constraints have internalised, interpersonal and structural elements that can be addressed through a range of strategies for advancing the role of women in medical leadership. These findings have implications for individual medical practitioners and health services, as well as professional colleges and associations. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Mixed-methods investigation of women's experiences with second-trimester abortion care in the Midwest and Northeast United States.

PubMed

Blanchard, Kelly; Meadows, Jill L; Gutierrez, Hialy R; Hannum, Curtiss Ps; Douglas-Durham, Ella F; Dennis, Amanda J

2017-12-01

We studied women's experiences seeking and receiving second-trimester abortion care in two geographically and legislatively different settings to inform ways to improve abortion care access and services. We conducted in-depth interviews with women who obtained second-trimester abortion care. Themes from the interviews were then used to inform a self-administered survey, which was completed by 108 women who received second-trimester abortion care in the Northeast and Midwest. We calculated descriptive statistics and used chi-squared and t-tests to compare responses. We interviewed eight women and surveyed 108 women. Most interviewees and 65.2% of survey respondents reported difficulties accessing care. Although most interview and survey respondents had insurance, a slight majority reported difficulty funding care. All interviewees and 57.9% of survey respondents reported positive experiences with providers, with many interviewees and 62.0% of survey respondents saying their abortion care was better than their usual health care. Most interviewees and 75.8% of survey respondents reported pain as low to moderate, and the majority of participants reported it was the same or less than expected. Knowledge about abortion restrictions was low. Most interviewees and 68.4% survey respondents disagreed with restrictions on insurance coverage of abortion. Common recommendations to improve experiences were to ensure travel and financial support and to decrease wait times at clinics. There were few regional differences among outcomes. Women seeking second-trimester abortion in these locations reported positive abortion experiences. However, they had to overcome significant obstacles to obtain care. This is the first study to systematically research women's second-trimester care experiences in two different regions of the United States. Regardless of location, women experienced barriers due to policies that impose gestational age restrictions, limit provider availability (consequently increasing wait times), and increase costs. Policy change to reduce these barriers is critical to improve access to and experiences with second trimester abortion care. Copyright © 2017 Elsevier Inc. All rights reserved.

Ground hardness and injury in community level Australian football.

PubMed

Twomey, Dara M; Finch, Caroline F; Lloyd, David G; Elliott, Bruce C; Doyle, Tim L A

2012-07-01

To describe the risk and details of injuries associated with ground hardness in community level Australian football (AF). Prospective injury surveillance with periodic objective ground hardness measurement. 112 ground hardness assessments were undertaken using a Clegg hammer at nine locations across 20 grounds, over the 2007 and 2008 AF seasons. Details of 352 injuries sustained by community level players on those grounds were prospectively collected as part of a large randomised controlled trial. The ground location of the injury was matched to the nearest corresponding ground hardness Clegg hammer readings, in gravities (g), which were classified from unacceptably low (<30 g) to unacceptably high hardness (>120 g). Clegg hammer readings ranged from 25 to 301 g. Clegg hammer hardness categories from low/normal to high/normal were associated with the majority of injuries, with only 3.7% (13 injuries) on unacceptably high hardness and 0.3% (1 injury) on the unacceptably low hardness locations. Relative to the preferred range of hardness, the risk of sustaining an injury on low/normal hardness locations was 1.31 (95%CI: 1.06-1.62) times higher and 1.82 (95%CI: 1.17-2.85) times higher on locations with unacceptably high hardness. The more severe injuries occurred with low/normal ground hardness. Despite the low number of injuries, the risk of sustaining an injury on low/normal and unacceptably hard grounds was significantly greater than on the preferred range of hardness. Notably, the severity of the injuries sustained on unacceptably hard grounds was lower than for other categories of hardness. Copyright © 2012 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Numerical Hydraulic Study on Seawater Cooling System of Combined Cycle Power Plant

NASA Astrophysics Data System (ADS)

Kim, J. Y.; Park, S. M.; Kim, J. H.; Kim, S. W.

2010-06-01

As the rated flow and pressure increase in pumping facilities, a proper design against surges and severe cavitations in the pipeline system is required. Pressure surge due to start-up, shut-down process and operation failure causes the water hammer in upstream of the closing valve and the cavitational hammer in downstream of the valve. Typical cause of water hammer is the urgent closure of valves by breakdown of power supply and unexpected failure of pumps. The abrupt changes in the flow rate of the liquid results in high pressure surges in upstream of the valves, thus kinetic energy is transformed into potential energy which leads to the sudden increase of the pressure that is called as water hammer. Also, by the inertia, the liquid continues to flow downstream of the valve with initial speed. Accordingly, the pressure decreases and an expanding vapor bubble known as column separation are formed near the valve. In this research, the hydraulic study on the closed cooling water heat exchanger line, which is the one part of the power plant, is introduced. The whole power plant consists of 1,200 MW combined power plant and 220,000 m3/day desalination facility. Cooling water for the plant is supplied by sea water circulating system with a capacity of 29 m3/s. The primary focus is to verify the steady state hydraulic capacity of the system. The secondary is to quantify transient issues and solutions in the system. The circuit was modeled using a commercial software. The stable piping network was designed through the hydraulic studies using the simulation for the various scenarios.

Cavitation phenomena in mechanical heart valves: studied by using a physical impinging rod system.

PubMed

Lo, Chi-Wen; Chen, Sheng-Fu; Li, Chi-Pei; Lu, Po-Chien

2010-10-01

When studying mechanical heart valve cavitation, a physical model allows direct flow field and pressure measurements that are difficult to perform with actual valves, as well as separate testing of water hammer and squeeze flow effects. Movable rods of 5 and 10 mm diameter impinged same-sized stationary rods to simulate squeeze flow. A 24 mm piston within a tube simulated water hammer. Adding a 5 mm stationary rod within the tube generated both effects simultaneously. Charged-coupled device (CCD) laser displacement sensors, strobe lighting technique, laser Doppler velocimetry (LDV), particle image velocimetry (PIV) and high fidelity piezoelectric pressure transducers measured impact velocities, cavitation images, squeeze flow velocities, vortices, and pressure changes at impact, respectively. The movable rods created cavitation at critical impact velocities of 1.6 and 1.2 m/s; squeeze flow velocities were 2.8 and 4.64 m/s. The isolated water hammer created cavitation at 1.3 m/s piston speed. The combined piston and stationary rod created cavitation at an impact speed of 0.9 m/s and squeeze flow of 3.2 m/s. These results show squeeze flow alone caused cavitation, notably at lower impact velocity as contact area increased. Water hammer alone also caused cavitation with faster displacement. Both effects together were additive. The pressure change at the vortex center was only 150 mmHg, which cannot generate the magnitude of pressure drop required for cavitation bubble formation. Cavitation occurred at 3-5 m/s squeeze flow, significantly different from the 14 m/s derived by Bernoulli's equation; the temporal acceleration of unsteady flow requires further study.

77 FR 67020 - Performance Review Board Appointments

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-08

..., Tommy Beck, Richard Belin, Alletta Berrigan, Michael Black, Michael Black, Steven Blanchard, Mary Josie..., Robert Reidenbach, Dennis Reynolds, Michael Rice, Bryan Roberson, Edwin Rountree, Carl Russ, David...

Documentation in a Software Maintenance Environment.

DTIC Science & Technology

1987-08-28

Michael Jackson Diagrams 0...8217 ." " . ." ." ""’, " , "" " - . -’" ,," ’" " " "’" d t Review of Documentation Techniques Michael Jackson Diagrams Michael Jackson diagrams show data...coupling and cohesion. Logic is not represented in this technique, which thus is of limited value. Advantages: Michael Jackson diagrams are similar

Barriers to higher education: commonalities and contrasts in the experiences of Hindu and Muslim young women in urban Bengaluru

PubMed Central

Sahu, Biswamitra; Jeffery, Patricia; Nakkeeran, N.

2017-01-01

Abstract Gender inequalities in educational attainment have attracted considerable attention and this article aims to contribute to our understanding of young women’s access to higher education. The article is based on our in-depth interviews with 26 Hindu and Muslim young women attending colleges in urban Bengaluru (formerly Bangalore), south India, and explores the barriers they confronted in fulfilling their aspirations. We highlight the similarities amongst the young women, as well as the distinctive experiences of the Hindu and Muslim interviewees. Financial constraints, lack of safety for women in public space, and gender bias, gossip and social control within the family and the local community affected Hindu and Muslim interviewees in substantially similar ways. For the Muslim interviewees, however, gender disadvantage was compounded by their minority status. This both underlines the importance of incorporating communal politics into our analysis and undermines popular discourses that stereotype Muslims in India as averse to girls’ and young women’s education. PMID:28392620

The Attitudes of Indian Palliative-care Nurses and Physicians to Pain Control and Palliative Sedation

PubMed Central

Gielen, Joris; Gupta, Harmala; Rajvanshi, Ambika; Bhatnagar, Sushma; Mishra, Seema; Chaturvedi, Arvind K; den Branden, Stef Van; Broeckaert, Bert

2011-01-01

Aim: We wanted to assess Indian palliative-care nurses and physicians’ attitudes toward pain control and palliative sedation. Materials and Methods: From May to September 2008, we interviewed 14 physicians and 13 nurses working in different palliative-care programs in New Delhi, using a semi-structured questionnaire, and following grounded-theory methodology (Glaser and Strauss). Results: The interviewees did not consider administration of painkillers in large doses an ethical problem, provided the pain killers are properly titrated. Mild palliative sedation was considered acceptable. The interviewees disagreed whether palliative sedation can also be deep and continuous. Arguments mentioned against deep continuous palliative sedation were the conviction that it may cause unacceptable side effects, and impedes basic daily activities and social contacts. A few interviewees said that palliative sedation may hasten death. Conclusion: Due to fears and doubts regarding deep continuous palliative sedation, it may sometimes be too easily discarded as a treatment option for refractory symptoms. PMID:21633619

Barriers to higher education: commonalities and contrasts in the experiences of Hindu and Muslim young women in urban Bengaluru.

PubMed

Sahu, Biswamitra; Jeffery, Patricia; Nakkeeran, N

2017-03-04

Gender inequalities in educational attainment have attracted considerable attention and this article aims to contribute to our understanding of young women's access to higher education. The article is based on our in-depth interviews with 26 Hindu and Muslim young women attending colleges in urban Bengaluru (formerly Bangalore), south India, and explores the barriers they confronted in fulfilling their aspirations. We highlight the similarities amongst the young women, as well as the distinctive experiences of the Hindu and Muslim interviewees. Financial constraints, lack of safety for women in public space, and gender bias, gossip and social control within the family and the local community affected Hindu and Muslim interviewees in substantially similar ways. For the Muslim interviewees, however, gender disadvantage was compounded by their minority status. This both underlines the importance of incorporating communal politics into our analysis and undermines popular discourses that stereotype Muslims in India as averse to girls' and young women's education.

African Immigrants in Low-Wage Direct Health Care: Motivations, Job Satisfaction, and Occupational Mobility.

PubMed

Covington-Ward, Yolanda

2017-06-01

This study explores motivations, job satisfaction, and overall perceived occupational mobility for African immigrants working in low-wage direct health care occupations. The study uses qualitative semi-structured interviews with a sample of thirty African immigrant workers in the greater Pittsburgh metropolitan area. Results show that four major themes captured the motivations of interviewees for doing direct care work: passion for care work, quick money, easily obtained employment, and direct care work as a pathway to other health occupations. The majority of the interviewees were satisfied with their jobs, yet almost all of them saw their occupations as temporary or transitional employment. Most of the interviewees also saw their jobs as lacking occupational mobility. In light of the increased national demand for direct care workers, the growing numbers of immigrants in the direct care labor force, and the high turnover and low retention rates of direct care workers overall, the study suggests that more must be done to make direct care work attractive and rewarding for African immigrant workers.

Concrete density estimation by rebound hammer method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ismail, Mohamad Pauzi bin, E-mail: pauzi@nm.gov.my; Masenwat, Noor Azreen bin; Sani, Suhairy bin

Concrete is the most common and cheap material for radiation shielding. Compressive strength is the main parameter checked for determining concrete quality. However, for shielding purposes density is the parameter that needs to be considered. X- and -gamma radiations are effectively absorbed by a material with high atomic number and high density such as concrete. The high strength normally implies to higher density in concrete but this is not always true. This paper explains and discusses the correlation between rebound hammer testing and density for concrete containing hematite aggregates. A comparison is also made with normal concrete i.e. concrete containingmore » crushed granite.« less

James Nasmyth, Engineer

NASA Astrophysics Data System (ADS)

Nasmyth, James; Smiles, Samuel

2010-06-01

Preface; 1. My ancestry; 2. Alexander Nasmyth; 3. An artist's family; 4. My early years; 5. My school-days; 6. Mechanical beginnings; 7. Henry Maudsley, London; 8. Maudsley's private assistant; 9. Holiday in the manufacturing districts; 10. Begin business at Manchester; 11. Bridgewater Foundry - partnership; 12. Free trade in ability - the strike - death of my father; 13. My marriage - the steam hammer; 14. Travels in France and Italy; 15. Steam hammer pile driver; 16. Nuremberg - St. Petersburg - Dannemora; 17. More about Bridgewater Foundry - Woolwich Arsenal; 18. Astronomical pursuits; 19. More about astronomy; 20. Retirement from business; 21. Active leisure; Chronological list of inventions and contrivances; Sun-ray origin of the pyramids, and cuneiform character; Index.

[The study of M dwarf spectral classification].

PubMed

Yi, Zhen-Ping; Pan, Jing-Chang; Luo, A-Li

2013-08-01

As the most common stars in the galaxy, M dwarfs can be used to trace the structure and evolution of the Milky Way. Besides, investigating M dwarfs is important for searching for habitability of extrasolar planets orbiting M dwarfs. Spectral classification of M dwarfs is a fundamental work. The authors used DR7 M dwarf sample of SLOAN to extract important features from the range of 600-900 nm by random forest method. Compared to the features used in Hammer Code, the authors added three new indices. Our test showed that the improved Hammer with new indices is more accurate. Our method has been applied to classify M dwarf spectra of LAMOST.

Pressure signature and evaluation of hammer pulses during underwater implosion in confining environments.

PubMed

Gupta, Sachin; Matos, Helio; Shukla, Arun; LeBlanc, James M

2016-08-01

The fluid structure interaction phenomenon occurring in confined implosions is investigated using high-speed three-dimensional digital image correlation (DIC) experiments. Aluminum tubular specimens are placed inside a confining cylindrical structure that is partially open to a pressurized environment. These specimens are hydrostatically loaded until they naturally implode. The implosion event is viewed, and recorded, through an acrylic window on the confining structure. The velocities captured through DIC are synchronized with the pressure histories to understand the effects of confining environment on the implosion process. Experiments show that collapse of the implodable volume inside the confining tube leads to strong oscillating water hammer waves. The study also reveals that the increasing collapse pressure leads to faster implosions. Both peak and average structural velocities increase linearly with increasing collapse pressure. The effects of the confining environment are better seen in relatively lower collapse pressure implosion experiments in which a long deceleration phase is observed following the peak velocity until wall contact initiates. Additionally, the behavior of the confining environment can be viewed and understood through classical water hammer theory. A one-degree-of-freedom theoretical model was created to predict the impulse pressure history for the particular problem studied.

Child health in the workplace: the Supreme Court in Hammer v. Dagenhart (1918).

PubMed

Berger, L R; Johansson, S R

1980-01-01

Exploitation of children in the labor force at the beginning of this century gave rise to a national campaign leading to congressional passage of the Keating-Owen Act in 1916. The act prohibited from interstate commerce goods produced in factories or mines that employed children who either were under fourteen years of age or who were under sixteen years of age and worked more than eight hours a day. Despite its popular support, the Act was declared unconstitutional by the Supreme Court in Hammer v. Dagenhart (1918). The Court's decision involved several major issues: interpretation of the Fifth and Fourteenth Amendments to the Constitution, freedom of contract, police power of the states, and the interstate commerce clause. Review of previous Court decisions suggests that the justices were on less than solid legal ground in reaching their decision. Examination of the historical context of the decision, however, suggests other factors that may have played a more important role than judicial precedents. The debate prompted by Hammer v. Dagenhart has much relevance to such current issues as young agricultural workers, sex discrimination in industry, and the powers of the federal government vis-a-vis states and individual citizens.

4. Photocopy of inkandwatercolor drawing (from St. Michael's Church) Rambusch, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. Photocopy of ink-and-watercolor drawing (from St. Michael's Church) Rambusch, illustrator ca. 1932-37 INTERIOR, LOOKING NORTHEAST - St. Michael's Catholic Church, 519 East Third Street, Madison, Jefferson County, IN

Michael J. Fox: Spurring Research on Parkinson's

MedlinePlus

... on. Feature: Parkinson's Disease Michael J. Fox: Spurring Research on Parkinson's Past Issues / Winter 2014 Table of ... founded the Michael J. Fox Foundation for Parkinson's Research in the year 2000. Photo courtesy of Shutterstock " ...

Dignital Biological Converter

DTIC Science & Technology

2014-01-03

DARPA Contracting Officer: Michael Blackstone Submitted by: HEATHER GOUVIS Synthetic Genomics, Inc. 11149 NORTH TORREY PINES RD LA JOLLA, CA...Contracting Officer Representative (COR) Email: salit@nist.gov Michael Blackstone DARPA Contracting Officer Michael.Blackstone@darpa.mil DARPA

Biomimetically inspired asymmetric total synthesis of (+)-19-dehydroxyl arisandilactone A

NASA Astrophysics Data System (ADS)

Han, Yi-Xin; Jiang, Yan-Long; Li, Yong; Yu, Hai-Xin; Tong, Bing-Qi; Niu, Zhe; Zhou, Shi-Jie; Liu, Song; Lan, Yu; Chen, Jia-Hua; Yang, Zhen

2017-01-01

Complex natural products are a proven and rich source of disease-modulating drugs and of efficient tools for the study of chemical biology and drug discovery. The architectures of complex natural products are generally considered to represent significant barriers to efficient chemical synthesis. Here we describe a concise and efficient asymmetric synthesis of 19-dehydroxyl arisandilactone A--which belongs to a family of architecturally unique, highly oxygenated nortriterpenoids isolated from the medicinal plant Schisandra arisanensis. This synthesis takes place by means of a homo-Michael reaction, a tandem retro-Michael/Michael reaction, and Cu-catalysed intramolecular cyclopropanation as key steps. The proposed mechanisms for the homo-Michael and tandem retro-Michael/Michael reactions are supported by density functional theory (DFT) calculation. The developed chemistry may find application for the synthesis of its other family members of Schisandraceae nortriterpenoids.

Catalytic asymmetric Michael reactions promoted by a lithium-free lanthanum-BINOL complex

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sasai, Hiroaki; Arai, Takayoshi; Shibasaki, Masakatsu

1994-02-23

In this communication, we report about a new lithium-free BINOL-lanthanum complex, which is quite effective in catalytic asymmetric Michael reaction. We have succeeded in developing effective asymmetric base catalysts, in particular, asymmetric ester enolate catalysts for asymmetric Michael reactions. Two asymmetric lanthanum complexes are now available, namely, BINOL-lanthanum-lithium complex, which is quite effective in catalytic asymmetric nitrosaldol reactions, and a new lithium-free BINOL-lanthanum ester enolate complex, that is very effective in catalytic asymmetric Michael reactions. The two complexes complement each other in their ability to catalyze asymmetric nitroaldol and asymmetric Michael reactions. 14 refs., 1 fig., 2 tabs.

Chain Dynamic Formulations for Multibody System Tracked Vehicles (Preprint)

DTIC Science & Technology

2013-03-06

Michael Wallin 1 Ahmed K. Aboubakr 1 Paramsothy Jayakumar 2 Michael D. Letherwood 2 Ashraf Hamed 1 Ahmed A. Shabana 1...5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Michael Wallin; Ahmed Aboubakr; Paramsothy Jayakumar ; Michael Letherwood; Ashraf Hamed 5d...Taylor & Francis/CRC, Boca Raton, Florida. 16. Shabana, A. A., Hamed, A. M., Mohamed, A. A., Jayakumar , P., and Letherwood, M. D. 2012, “Use of B

Michael E. Himmel | NREL

Science.gov Websites

E. Himmel Photo of Michael E. Himmel Michael Himmel Senior Research Fellow I-Molecular Biology ;Towards a molecular-level theory of carbohydrate processivity," Curr. Opinion Biotechnol. (2014 University, Department of Biochem. & Molecular Biol., Distinguished Alumnus (2014) Battelle Memorial

The stomatopod dactyl club: a formidable damage-tolerant biological hammer.

PubMed

Weaver, James C; Milliron, Garrett W; Miserez, Ali; Evans-Lutterodt, Kenneth; Herrera, Steven; Gallana, Isaias; Mershon, William J; Swanson, Brook; Zavattieri, Pablo; DiMasi, Elaine; Kisailus, David

2012-06-08

Nature has evolved efficient strategies to synthesize complex mineralized structures that exhibit exceptional damage tolerance. One such example is found in the hypermineralized hammer-like dactyl clubs of the stomatopods, a group of highly aggressive marine crustaceans. The dactyl clubs from one species, Odontodactylus scyllarus, exhibit an impressive set of characteristics adapted for surviving high-velocity impacts on the heavily mineralized prey on which they feed. Consisting of a multiphase composite of oriented crystalline hydroxyapatite and amorphous calcium phosphate and carbonate, in conjunction with a highly expanded helicoidal organization of the fibrillar chitinous organic matrix, these structures display several effective lines of defense against catastrophic failure during repetitive high-energy loading events.

Impacting device for testing insulation

NASA Technical Reports Server (NTRS)

Redmon, J. W. (Inventor)

1984-01-01

An electro-mechanical impacting device for testing the bonding of foam insulation to metal is descirbed. The device lightly impacts foam insulation attached to metal to determine whether the insulation is properly bonded to the metal and to determine the quality of the bond. A force measuring device, preferably a load cell mounted on the impacting device, measures the force of the impact and the duration of the time the hammer head is actually in contact with the insulation. The impactor is designed in the form of a handgun having a driving spring which can propel a plunger forward to cause a hammer head to impact the insulation. The device utilizes a trigger mechanism which provides precise adjustements, allowing fireproof operation.

The Stomatopod Dactyl Club: A Formidable Damage-Tolerant Biological Hammer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weaver J. C.; DiMasi E.; Milliron, G.W.

2012-06-08

Nature has evolved efficient strategies to synthesize complex mineralized structures that exhibit exceptional damage tolerance. One such example is found in the hypermineralized hammer-like dactyl clubs of the stomatopods, a group of highly aggressive marine crustaceans. The dactyl clubs from one species, Odontodactylus scyllarus, exhibit an impressive set of characteristics adapted for surviving high-velocity impacts on the heavily mineralized prey on which they feed. Consisting of a multiphase composite of oriented crystalline hydroxyapatite and amorphous calcium phosphate and carbonate, in conjunction with a highly expanded helicoidal organization of the fibrillar chitinous organic matrix, these structures display several effective lines ofmore » defense against catastrophic failure during repetitive high-energy loading events.« less

A Study of Specific Fracture Energy at Percussion Drilling

NASA Astrophysics Data System (ADS)

A, Shadrina; T, Kabanova; V, Krets; L, Saruev

2014-08-01

The paper presents experimental studies of rock failure provided by percussion drilling. Quantification and qualitative analysis were carried out to estimate critical values of rock failure depending on the hammer pre-impact velocity, types of drill bits and cylindrical hammer parameters (weight, length, diameter), and turn angle of a drill bit. Obtained data in this work were compared with obtained results by other researchers. The particle-size distribution in granite-cutting sludge was analyzed in this paper. Statistical approach (Spearmen's rank-order correlation, multiple regression analysis with dummy variables, Kruskal-Wallis nonparametric test) was used to analyze the drilling process. Experimental data will be useful for specialists engaged in simulation and illustration of rock failure.

Comparing early signs and basic symptoms as methods for predicting psychotic relapse in clinical practice.

PubMed

Eisner, Emily; Drake, Richard; Lobban, Fiona; Bucci, Sandra; Emsley, Richard; Barrowclough, Christine

2018-02-01

Early signs interventions show promise but could be further developed. A recent review suggested that 'basic symptoms' should be added to conventional early signs to improve relapse prediction. This study builds on preliminary evidence that basic symptoms predict relapse and aimed to: 1. examine which phenomena participants report prior to relapse and how they describe them; 2. determine the best way of identifying pre-relapse basic symptoms; 3. assess current practice by comparing self- and casenote-reported pre-relapse experiences. Participants with non-affective psychosis were recruited from UK mental health services. In-depth interviews (n=23), verbal checklists of basic symptoms (n=23) and casenote extracts (n=208) were analysed using directed content analysis and non-parametric statistical tests. Three-quarters of interviewees reported basic symptoms and all reported conventional early signs and 'other' pre-relapse experiences. Interviewees provided rich descriptions of basic symptoms. Verbal checklist interviews asking specifically about basic symptoms identified these experiences more readily than open questions during in-depth interviews. Only 5% of casenotes recorded basic symptoms; interviewees were 16 times more likely to report basic symptoms than their casenotes did. The majority of interviewees self-reported pre-relapse basic symptoms when asked specifically about these experiences but very few casenotes reported these symptoms. Basic symptoms may be potent predictors of relapse that clinicians miss. A self-report measure would aid monitoring of basic symptoms in routine clinical practice and would facilitate a prospective investigation comparing basic symptoms and conventional early signs as predictors of relapse. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Patient-perceived acceptability and behaviour change benefits of inhaler reminders and adherence feedback: A qualitative study.

PubMed

Foster, Juliet M; Reddel, Helen K; Usherwood, Tim; Sawyer, Susan M; Smith, Lorraine

2017-08-01

Little is known about patients' perceptions of electronic inhaler reminders, which have emerged in recent years as adherence promotion aids. This study explored asthma patients' attitudes toward the acceptability and utility of inhaler reminders. Participants from a 6-month cluster randomized controlled trial who received reminders for missed doses via SmartTrack adherence monitors (Adherium Ltd) were interviewed to explore their perceptions; interviews were audio-recorded, transcribed and analysed thematically. 18 participants (50% male, mean age 39 years [range 17-68]) were interviewed. Three themes were identified. Acceptability and Feasibility: Interviewees found the monitor easy to use. For some, concerns about the monitor itself affected adherence, e.g. leaving it at home to avoid breakage. Positive features included that reminders played only for missed doses, and the choice of reminder tunes. Utility and Behavioural Impact: Interviewees described reminders as an effective "training" tool for adherence, encouraging habit-formation, behaviour change and attitude change. Reminders were considered less acceptable or useful by participants who preferred taking medication only when symptomatic or who doubted the necessity or safety of their medication. Sustainability: Some interviewees reported sustained behaviour change, supported by reminders, through the establishment of routine or via experiential learning that good adherence improved their asthma. Other interviewees wanted ongoing support (i.e. reminders or substitute adherence cues) after study end. Patients with asthma found 6-months' use of reminders and adherence feedback acceptable and useful for improving their adherence attitudes, adherence behaviours and confidence in asthma self-management. Some patients may benefit from ongoing adherence support. Copyright © 2017 Elsevier Ltd. All rights reserved.

Adults’ Recollections and Perceptions of Childhood Caregiving to a Parent with Significant Physical Disability

PubMed Central

Iezzoni, Lisa I.; Wint, Amy J.; Kuhlthau, Karen A.; Boudreau, Alexy Arauz

2015-01-01

Background Caregiving roles of children < 18 years of age living with parents with health conditions or disability have been studied extensively abroad, but little U.S. research has examined the caregiving activities and perceptions of children with parents with significant physical disability. Objective To examine children’s caregiving activities for their disabled parent, childhood perceptions of these activities, and adult views of this caregiving. Methods We conducted one-hour, semi-structured, open-ended interviews with 20 persons age ≥ 21 years who as children (age < 18 years) had a parent with significant mobility disability. We used conventional content analysis to identify themes. Results Interviewees’ mean (standard deviation) age was 36.7 (13.8) years; 4 were male. As children, most interviewees assisted their disabled parent with activities of daily living (ADLs) and instrumental ADLs; some children provided more medical supports. Several parents, especially of older interviewees, did not seek their children’s care. Interviewees reported both positive and negative childhood attitudes about caregiving. Roughly half recalled as children feeling proud, special, or otherwise positively toward caregiving activities, while about one-third viewed caregiving as just part of their daily reality (i.e., simply needing to be done). Approximately half remembered also feeling resentful, primarily from time demands, insufficient appreciation, and being different from their peers. Interviewees reported gender and cultural factors affecting their caregiving roles and perceptions. Conclusions Children can provide significant care to parents with physical disability. Understanding better their roles and perceptions could suggest ways to improve these experiences for both child and parent. PMID:26712460

78 FR 42748 - Virginia Resource Advisory Committee Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-17

... each meeting, contact: Michael Williams, Public Affairs Specialist, Supervisor's Office, 540-265-5173... building in order to view comments. FOR FURTHER INFORMATION CONTACT: Michael Williams, Public Affairs... for time for oral comments must be sent to Michael Williams, Public Affairs Specialist, George...

Synthesis of Triazole Derivatives of Levoglucosenone As Promising Anticancer Agents: Effective Exploration of the Chemical Space through retro-aza-Michael//aza-Michael Isomerizations.

PubMed

Tsai, Yi-Hsuan; Borini Etichetti, Carla M; Di Benedetto, Carolina; Girardini, Javier E; Martins, Felipe Terra; Spanevello, Rolando A; Suárez, Alejandra G; Sarotti, Ariel M

2018-04-06

The design and synthesis of biomass-derived triazoles and the in vitro evaluation as potential anticancer agents are described. The discovery of base-catalyzed retro-aza-Michael//aza-Michael isomerizations allowed the exploration of the chemical space by affording novel types of triazoles, difficult to obtain otherwise. Following this strategy, 2,4-disubstituted 1,2,3-triazoles could be efficiently obtained from the corresponding 1,4-disubstituted analogues.

The process audit.

PubMed

Hammer, Michael

2007-04-01

Few executives question the idea that by redesigning business processes--work that runs from end to end across an enterprise--they can achieve extraordinary improvements in cost, quality, speed, profitability, and other key areas Yet in spite of their intentions and investments, many executives flounder, unsure about what exactly needs to be changed, by how much, and when. As a result, many organizations make little progress--if any at all--in their attempts to transform business processes. Michael Hammer has spent the past five years working with a group of leading companies to develop the Process and Enterprise Maturity Model (PEMM), a new framework that helps executives comprehend, formulate, and assess process-based transformation efforts. He has identified two distinct groups of characteristics that are needed for business processes to perform exceptionally well over a long period of time. Process enablers, which affect individual processes, determine how well a process is able to function. They are mutually interdependent--if any are missing, the others will be ineffective. However, enablers are not enough to develop high-performance processes; they only provide the potential to deliver high performance. A company must also possess or establish organizational capabilities that allow the business to offer a supportive environment. Together, the enablers and the capabilities provide an effective way for companies to plan and evaluate process-based transformations. PEMM is different from other frameworks, such as Capability Maturity Model Integration (CMMI), because it applies to all industries and all processes. The author describes how several companies--including Michelin, CSAA, Tetra Pak, Shell, Clorox, and Schneider National--have successfully used PEMM in various ways and at different stages to evaluate the progress of their process-based transformation efforts.

[Perception and attitude of rural community to the construction of Asian elephant conservation corridors in Xishuangbanna].

PubMed

Li, Zheng-Ling; Chen, Ming-Yong; Wu, Zhao-Lu; Wang, Qian; Dong, Yong-Hua

2009-06-01

By using contingent valuation method (CVM), an investigation was made from November 2007 to March 2008 on the perception and attitude of 196 households in 5 villages within 2 planned Asian elephant conservation corridors in Xishuangbanna to the construction of the corridors. 80.61% of the interviewees conditionally supported the corridors construction. The main factors affecting the interviewees' support willingness included their education level, per capita income, and perceptions to Asian elephant protection, human-elephant relations, and corridor utilization patterns and its beneficiaries, among which, the interviewees' awareness of Asian elephant conservation, corridor utilization patterns, and corridor beneficiaries had strong influence on the support willingness, with the correlation coefficient being 0.231, 0.236, and -0.304, respectively. The rural community holding the land tenure played a key role in the corridors construction. To effectively design and planning the construction of biological conservation corridor, it is necessary to have a deep understanding on the perceptions and attitudes of rural community to the construction of the corridor and to obtain their support and participation for this construction.

Definitions of Violence: Narratives of Survivors From the War in Bosnia and Herzegovina.

PubMed

Basic, Goran

2018-07-01

Previous research on violence during the war in Bosnia and Herzegovina has resulted in a one-sided presentation of the phenomenon of "war violence." Researchers have emphasized the importance of narratives in general but have not analyzed stories on war violence that were the product of interpersonal interaction and meaning-making activity. The aim of this article is to fill this knowledge gap by analyzing survivor narratives of the 1990s war in northwestern Bosnia. The focus is on analyzing interviewees' descriptions of wartime violence and the discursive patterns that contribute to constructing the phenomenon of "war violence." My analysis reveals an intimate relationship between how an interviewee interprets the biographical consequences of war violence and the individual's own war experiences. All interviewees described war violence as something that is morally reprehensible. These narratives, from both perpetrators of violence and those subjected to violence, recount violent situations that not only exist as mental constructions but also live on even after the war; thus, they have real consequences for the individuals and their society.

Shopping with Acquired Brain Injuries, Coping Strategies and Maslowian Principles.

PubMed

Andersson, Jonas E; Skehan, Terry; Rydén, Monica; Lagerkrans, Elisabeth

2016-01-01

A positive outcome of the modern welfare state is prolonged life expectancy. In Sweden, the expected life span has increased with approximatively 25 years during the 20th century [Statistics Sweden]. However, ageing is associated with an increased risk for acquiring cognitive and physical disabilities. This study is based on anonymized interviews with groups of older persons who experience cognitive problems and relatives. The interviewees were asked about everyday activities like shopping groceries, clothes or other necessities. The interviewees identified problems and described a series of strategies for coping. This paper uses fictionalized characters to present problems and coping strategies that the interviewees use to overcome cognitive challenges when shopping groceries. The strategies range from complete withdrawal, an increased dependency on proxies to the development of elaborate techniques to mask their problem and obtain assistance. Following the current trend in the design of the Swedish sales environment - large scale, abundance of goods and Maslowian strategies for making people stay longer (and spend more money) - accessibility in the built environment is often an absent friend.

Surface Modified Particles By Multi-Step Michael-Type Addition And Process For The Preparation Thereof

DOEpatents

Cook, Ronald Lee; Elliott, Brian John; Luebben, Silvia DeVito; Myers, Andrew William; Smith, Bryan Matthew

2005-05-03

A new class of surface modified particles and a multi-step Michael-type addition surface modification process for the preparation of the same is provided. The multi-step Michael-type addition surface modification process involves two or more reactions to compatibilize particles with various host systems and/or to provide the particles with particular chemical reactivities. The initial step comprises the attachment of a small organic compound to the surface of the inorganic particle. The subsequent steps attach additional compounds to the previously attached organic compounds through reactive organic linking groups. Specifically, these reactive groups are activated carbon—carbon pi bonds and carbon and non-carbon nucleophiles that react via Michael or Michael-type additions.

SESAME/CASSE listening to the insertion of the MUPUS PEN at Abydos site, 67P/Churyumov-Gerasimenko

NASA Astrophysics Data System (ADS)

Knapmeyer, M.; Fischer, H.-H.; Knollenberg, J.; Seidensticker, K. J.; Thiel, K.; Arnold, W.; Faber, C.; Möhlmann, D.

2015-10-01

SESAME is a suite of three instruments (the Comet Acoustic Surface Sounding Experiment CASSE, the Dust Impact Monitor DIM, and the electrical Permittivity Probe PP) that have sensors and transmitters distributed all over the Philae lander, but share common electronics for commanding and processing. SESAME is conducted by a consortium of DLR, the Max Planck Institute for Solar System Research (Göttingen), and the Finnish Meteorological Institute (Helsinki, [1]). The Multi-Purpose Sensor MUPUS, run also by DLR, combines a thermal conductivity and heat flow experiment with a mechanical properties experiment associated with the anchoring harpoons of the lander ([2]). It was recognized early in the preparation of both the SESAME and MUPUS experiments that the hammering mechanism of the latter, which drives the thermal probe into the ground, might as well serve as source of elastic waves for the CASSE experiment. To support the CASSE experiment, the MUPUS flight software provides information on its hammering process in a shared memory of the lander data management system. CASSE listening to the MUPUS PEN hammer mechanism proved to be the first active seismic experiment conducted on a celestial body other than Earth since the Lunar Seismic Profiling Experiment, which was carried out on the Moon by the Apollo 17 astronauts in 1972 (e.g. [3]).

Validation of finite element computations for the quantitative prediction of underwater noise from impact pile driving.

PubMed

Zampolli, Mario; Nijhof, Marten J J; de Jong, Christ A F; Ainslie, Michael A; Jansen, Erwin H W; Quesson, Benoit A J

2013-01-01

The acoustic radiation from a pile being driven into the sediment by a sequence of hammer strikes is studied with a linear, axisymmetric, structural acoustic frequency domain finite element model. Each hammer strike results in an impulsive sound that is emitted from the pile and then propagated in the shallow water waveguide. Measurements from accelerometers mounted on the head of a test pile and from hydrophones deployed in the water are used to validate the model results. Transfer functions between the force input at the top of the anvil and field quantities, such as acceleration components in the structure or pressure in the fluid, are computed with the model. These transfer functions are validated using accelerometer or hydrophone measurements to infer the structural forcing. A modeled hammer forcing pulse is used in the successive step to produce quantitative predictions of sound exposure at the hydrophones. The comparison between the model and the measurements shows that, although several simplifying assumptions were made, useful predictions of noise levels based on linear structural acoustic models are possible. In the final part of the paper, the model is used to characterize the pile as an acoustic radiator by analyzing the flow of acoustic energy.

Lead sheathing of ship hulls in the Roman period: Archaeometallurgical characterisation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kahanov, Yaacov, E-mail: yak@research.haifa.ac.il; Ashkenazi, Dana

An archaeometallurgical analysis of samples of lead sheathing from five ships of the Roman period was carried out in order to determine their composition and microstructure, and to obtain a better understanding of their manufacturing processes. The examinations included optical microscopy of metallographic cross-sections, microhardness tests, scanning electron microscopy, including energy dispersive spectroscopy, and X-ray photoelectron spectroscopy. The results show that the samples were all composed of lead covered with an oxide layer. The sheet thicknesses, microhardness values and microhardness distribution, as well as the grain size distribution, led to the conclusion that all of the sheets were produced bymore » the same technology, using hammering, and were probably used for the same purpose. The presence of antimony was observed in the sample from the Roman ship from Caesarea, which may hint at an Italian (Sardinian) origin of the material, and perhaps of the ship. - Research Highlights: {yields} During the Roman period ship hulls were sheathed with lead. {yields} Five samples have been analysed for their characteristics and manufacturing process. {yields} The process was cold-working (strain-hardening) using hammering. {yields} The lead was open-casted on a flat stone, and later hammered at room temperature. {yields} Antimony in the Caesarea shipwreck may indicate an Italian origin of construction.« less

The Effect of Intraoperative Sounds of Saw and Hammer on Psychological Condition in Patients with Total Knee Arthroplasty: Prospective Randomized Study

PubMed Central

Kömürcü, Erkam; Kaymaz, Burak; Gölge, Umut Hatay; Nusran, Gürdal; Göksel, Ferdi; Şahin, Hasan; Ömür, Dilek; Hancı, Volkan

2015-01-01

Purpose. Surgical procedures are likely to be stressful for patients and their families. Total knee arthroplasty (TKA) is a major surgical procedure used in the treatment of osteoarthritis. During this procedure the sounds of the saw and hammer may irritate the patient and adversely affect mood. The present study examines the effect of these intraoperative sounds during TKA on postoperative mood and anxiety, by comparing two different anesthetic procedures. Methods. A total of 40 patients who underwent TKA for grade IV gonarthrosis participated in the study. Patients were randomly divided into two groups: 20 patients in the general anesthesia group and 20 patients in the spinal anesthesia group. Mood and anxiety changes were evaluated using the Profile of Mood States (POMS) and State-Trait Anxiety Inventory (STAI) instruments, respectively. Results. The postoperative POMS value in the spinal anesthesia group was definitively higher than the general anesthesia group, though the difference in preoperative and postoperative POMS and STAI scores between the two groups was not significant. Conclusion. It would seem that sounds of hammer and saw have no evident negative effect on patient's mood. Regional anesthesia is advisable for TKA patients and appropriate sedation can be administered during the operation if needed. PMID:25793222

KSC-99pp0838

NASA Image and Video Library

1999-07-16

At a special presentation in the IMAX 2 Theater in the Kennedy Space Center Visitor Complex, the Hammer Award is presented to Kennedy Space Center and the 45th Space Wing. Among the attendees in the audience are (center) Center Director Roy D. Bridges Jr., flanked by (at left) Commander of the 45th Space Wing Brig. Gen. F. Randall Starbuck and (at right) Commander of the Air Force Space Command General Richard B. Myers. Standing second from right is NASA Administrator Daniel S. Goldin. At the far right is Morley Winograd, director of the National Partnership for Reinventing Government, who presented the award. The Hammer Award is Vice President Al Gore's special recognition of teams of federal employees who have made significant contributions in support of the principles of the National Partnership for Reinventing Government. This Hammer Award acknowledges the accomplishments of a joint NASA and Air Force team that established the Joint Base Operations and Support Contract (J-BOSC) Source Evaluation Board (SEB). Ed Gormel and Chris Fairey, co-chairs of the SEB, accepted the awards for the SEB. The team developed and implemented the acquisition strategy for establishing a single set of base operations and support service requirements for KSC, Cape Canaveral Air Station and Patrick Air Force Base

Analysis of laboratory compaction methods of roller compacted concrete

NASA Astrophysics Data System (ADS)

Trtík, Tomáš; Chylík, Roman; Bílý, Petr; Fládr, Josef

2017-09-01

Roller-Compacted Concrete (RCC) is an ordinary concrete poured and compacted with machines typically used for laying of asphalt road layers. One of the problems connected with this technology is preparation of representative samples in the laboratory. The aim of this work was to analyse two methods of preparation of RCC laboratory samples with bulk density as the comparative parameter. The first method used dynamic compaction by pneumatic hammer. The second method of compaction had a static character. The specimens were loaded by precisely defined force in laboratory loading machine to create the same conditions as during static rolling (in the Czech Republic, only static rolling is commonly used). Bulk densities obtained by the two compaction methods were compared with core drills extracted from real RCC structure. The results have shown that the samples produced by pneumatic hammer tend to overestimate the bulk density of the material. For both compaction methods, immediate bearing index test was performed to verify the quality of compaction. A fundamental difference between static and dynamic compaction was identified. In static compaction, initial resistance to penetration of the mandrel was higher, after exceeding certain limit the resistance was constant. This means that the samples were well compacted just on the surface. Specimens made by pneumatic hammer actively resisted throughout the test, the whole volume was uniformly compacted.

Water hammer reduces fouling during natural water ultrafiltration.

PubMed

Broens, F; Menne, D; Pothof, I; Blankert, B; Roesink, H D W; Futselaar, H; Lammertink, R G H; Wessling, M

2012-03-15

Today's ultrafiltration processes use permeate flow reversal to remove fouling deposits on the feed side of ultrafiltration membranes. We report an as effective method: the opening and rapid closing of a valve on the permeate side of an ultrafiltration module. The sudden valve closure generates pressure fluctuations due to fluid inertia and is commonly known as "water hammer". Surface water was filtrated in hollow fiber ultrafiltration membranes with a small (5%) crossflow. Filtration experiments above sustainable flux levels (>125 l (m2h)(-1)) show that a periodic closure of a valve on the permeate side improves filtration performance as a consequence of reduced fouling. It was shown that this effect depends on flux and actuation frequency of the valve. The time period that the valve was closed proved to have no effect on filtration performance. The pressure fluctuations generated by the sudden stop in fluid motion due to the valve closure are responsible for the effect of fouling reduction. High frequency recording of the dynamic pressure evolution shows water hammer related pressure fluctuations to occur in the order of 0.1 bar. The pressure fluctuations were higher at higher fluxes (higher velocities) which is in agreement with the theory. They were also more effective at higher fluxes with respect to fouling mitigation. Copyright © 2011 Elsevier Ltd. All rights reserved.

Acute effects of vibration from a chipping hammer and a grinder on the hand-arm system.

PubMed Central

Kihlberg, S; Attebrant, M; Gemne, G; Kjellberg, A

1995-01-01

OBJECTIVES--The purpose of this study was to compare various effects on the hand-arm system of vibration exposure from a chipping hammer and a grinder with the same frequency weighted acceleration. Grip and push forces were measured and monitored during the exposure. The various effects were: muscle activity (measured with surface electrodes), discomfort ratings for different parts of the hand-arm system (made during and after exposure), and vibration perception threshold (for 10 minutes before and 10 minutes after the exposure). RESULTS--No increase in muscle activity due to exposure to vibration was found in the hand muscle studied. In the forearm, conversely, there was an increase in both muscle studied. For the upper arm the muscle activity only increased when exposed to impact vibration. Subjective ratings in the hand and shift in vibration perception threshold were effected more by the grinder than the hammer exposure. CONCLUSION--These results show that the reaction of the hand-arm system to vibration varies with frequency quantitatively as well as qualitatively. They do not support the notion that one single frequency weighted curve would be valid for the different health effects of hand-arm vibration (vascular, musculoskeletal, neurological, and psychophysiological). PMID:8535492

Auto Indexer Auto-Indexer for Percussive Hammers: Vane Motor Dynamometer Testing

DOE Data Explorer

Su, Jiann

2012-01-01

Objectives Options associated with geothermal drilling operations are generally limited by factors such as formation temperature and rock strength. The objective of the research is to expand the "tool box" available to the geothermal driller by furthering the development of a high-temperature drilling motor that can be used in directional drilling applications for drilling high temperature geothermal formations. The motor is specifically designed to operate in conjunction with a pneumatic down-the-hole-hammer. It provides a more compact design compared to traditional drilling motors such as PDMs (positive displacement motors). The packaging can help to enhance directional drilling capabilities. It uses no elastomeric components, which enables it to operate in higher temperatures ( >250 °F). Current work on the motor has shown that is a capable of operating under pneumatic power with a down-the-hole-hammer. Further development work will include continued testing and refining motor components and evaluating motor capabilities. Targets/Milestones Complete testing current motor - 12/31/2010 Make final material and design decisions - 01/31/2011 Build and test final prototype - 04/31/2011 Final demonstration - 07/31/2011 Impacts The development of the motor will help to achieve program technical objectives by improving well construction capabilities. This includes enabling high-temperature drilling as well as enhancing directional drilling. A key component in the auto indexer is the drive motor. It is an air-driven vane motor that converts the energy stored in the compressed air to mechanical energy. The motor is attached to hammer-like components which impart an impulsive load onto the drive shaft. The impulsive force on the drive shaft in turn creates an indexing action. A controlled test was performed to characterize the performance of the the vane motor for a given pressure. The Sandia dynamometer test station was used to determine the performance of the motor for a given input pressure.

Variable Step Integration Coupled with the Method of Characteristics Solution for Water-Hammer Analysis, A Case Study

NASA Technical Reports Server (NTRS)

Turpin, Jason B.

2004-01-01

One-dimensional water-hammer modeling involves the solution of two coupled non-linear hyperbolic partial differential equations (PDEs). These equations result from applying the principles of conservation of mass and momentum to flow through a pipe, and usually the assumption that the speed at which pressure waves propagate through the pipe is constant. In order to solve these equations for the interested quantities (i.e. pressures and flow rates), they must first be converted to a system of ordinary differential equations (ODEs) by either approximating the spatial derivative terms with numerical techniques or using the Method of Characteristics (MOC). The MOC approach is ideal in that no numerical approximation errors are introduced in converting the original system of PDEs into an equivalent system of ODEs. Unfortunately this resulting system of ODEs is bound by a time step constraint so that when integrating the equations the solution can only be obtained at fixed time intervals. If the fluid system to be modeled also contains dynamic components (i.e. components that are best modeled by a system of ODEs), it may be necessary to take extremely small time steps during certain points of the model simulation in order to achieve stability and/or accuracy in the solution. Coupled together, the fixed time step constraint invoked by the MOC, and the occasional need for extremely small time steps in order to obtain stability and/or accuracy, can greatly increase simulation run times. As one solution to this problem, a method for combining variable step integration (VSI) algorithms with the MOC was developed for modeling water-hammer in systems with highly dynamic components. A case study is presented in which reverse flow through a dual-flapper check valve introduces a water-hammer event. The predicted pressure responses upstream of the check-valve are compared with test data.

76 FR 10352 - Keyser, Michael J.; Notice of Filing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-24

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. ID-6495-000] Keyser, Michael J.; Notice of Filing Take notice that on February 15, 2011, Michael J. Keyser submitted for filing, an application for authority to hold interlocking positions, pursuant to section 305(b) of the...

Method for promoting Michael addition reactions

DOEpatents

Shah, Pankaj V.; Vietti, David E.; Whitman, David William

2010-09-21

Homogeneously dispersed solid reaction promoters having an average particle size from 0.01 .mu.m to 500 .mu.m are disclosed for preparing curable mixtures of at least one Michael donor and at least one Michael acceptor. The resulting curable mixtures are useful as coatings, adhesives, sealants and elastomers.

Validity of the Water Hammer Formula for Determining Regional Aortic Pulse Wave Velocity: Comparison of One-Point and Two-Point (Foot-to-Foot) Measurements Using a Multisensor Catheter in Human.

PubMed

Hanya, Shizuo

2013-01-01

Lack of high-fidelity simultaneous measurements of pressure and flow velocity in the aorta has impeded the direct validation of the water-hammer formula for estimating regional aortic pulse wave velocity (AO-PWV1) and has restricted the study of the change of beat-to-beat AO-PWV1 under varying physiological conditions in man. Aortic pulse wave velocity was derived using two methods in 15 normotensive subjects: 1) the conventional two-point (foot-to-foot) method (AO-PWV2) and 2) a one-point method (AO-PWV1) in which the pressure velocity-loop (PV-loop) was analyzed based on the water hammer formula using simultaneous measurements of flow velocity (Vm) and pressure (Pm) at the same site in the proximal aorta using a multisensor catheter. AO-PWV1 was calculated from the slope of the linear regression line between Pm and Vm where wave reflection (Pb) was at a minimum in early systole in the PV-loop using the water hammer formula, PWV1 = (Pm/Vm)/ρ, where ρ is the blood density. AO-PWV2 was calculated using the conventional two-point measurement method as the distance/traveling time of the wave between 2 sites for measuring P in the proximal aorta. Beat-to-beat alterations of AO-PWV1 in relationship to aortic pressure and linearity of the initial part of the PV-loop during a Valsalva maneuver were also assessed in one subject. The initial part of the loop became steeper in association with the beat-to-beat increase in diastolic pressure in phase 4 during the Valsalva maneuver. The linearity of the initial part of the PV-loop was maintained consistently during the maneuver. Flow velocity vs. pressure in the proximal aorta was highly linear during early systole, with Pearson's coefficients ranging from 0.9954 to 0.9998. The average values of AO-PWV1 and AO-PWV2 were 6.3 ± 1.2 and 6.7 ± 1.3 m/s, respectively. The regression line of AO-PWV1 on AO-PWV2 was y = 0.95x + 0.68 (r = 0.93, p <0.001). This study concluded that the water-hammer formula (one-point method) provides a reliable and conventional estimate of beat-to-beat aortic regional pulse wave velocity consistently regardless of the changes in physiological states in human clinically. (English Translation of J Jpn Coll Angiol 2011; 51: 215-221).

Validity of the Water Hammer Formula for Determining Regional Aortic Pulse Wave Velocity: Comparison of One-Point and Two-Point (Foot-to-Foot) Measurements Using a Multisensor Catheter in Human

PubMed Central

2013-01-01

Background: Lack of high-fidelity simultaneous measurements of pressure and flow velocity in the aorta has impeded the direct validation of the water-hammer formula for estimating regional aortic pulse wave velocity (AO-PWV1) and has restricted the study of the change of beat-to-beat AO-PWV1 under varying physiological conditions in man. Methods: Aortic pulse wave velocity was derived using two methods in 15 normotensive subjects: 1) the conventional two-point (foot-to-foot) method (AO-PWV2) and 2) a one-point method (AO-PWV1) in which the pressure velocity-loop (PV-loop) was analyzed based on the water hammer formula using simultaneous measurements of flow velocity (Vm) and pressure (Pm) at the same site in the proximal aorta using a multisensor catheter. AO-PWV1 was calculated from the slope of the linear regression line between Pm and Vm where wave reflection (Pb) was at a minimum in early systole in the PV-loop using the water hammer formula, PWV1 = (Pm/Vm)/ρ, where ρ is the blood density. AO-PWV2 was calculated using the conventional two-point measurement method as the distance/traveling time of the wave between 2 sites for measuring P in the proximal aorta. Beat-to-beat alterations of AO-PWV1 in relationship to aortic pressure and linearity of the initial part of the PV-loop during a Valsalva maneuver were also assessed in one subject. Results: The initial part of the loop became steeper in association with the beat-to-beat increase in diastolic pressure in phase 4 during the Valsalva maneuver. The linearity of the initial part of the PV-loop was maintained consistently during the maneuver. Flow velocity vs. pressure in the proximal aorta was highly linear during early systole, with Pearson’s coefficients ranging from 0.9954 to 0.9998. The average values of AO-PWV1 and AO-PWV2 were 6.3 ± 1.2 and 6.7 ± 1.3 m/s, respectively. The regression line of AO-PWV1 on AO-PWV2 was y = 0.95x + 0.68 (r = 0.93, p <0.001). Conclusion: This study concluded that the water-hammer formula (one-point method) provides a reliable and conventional estimate of beat-to-beat aortic regional pulse wave velocity consistently regardless of the changes in physiological states in human clinically. (*English Translation of J Jpn Coll Angiol 2011; 51: 215-221) PMID:23825494

Ultrasonic/Sonic Rotary-Hammer Drills

NASA Technical Reports Server (NTRS)

Badescu, Mircea; Sherrit, Stewart; Bar-Cohen, Yoseph; Bao, Xiaoqi; Kassab, Steve

2010-01-01

Ultrasonic/sonic rotary-hammer drill (USRoHD) is a recent addition to the collection of apparatuses based on ultrasonic/sonic drill corer (USDC). As described below, the USRoHD has several features, not present in a basic USDC, that increase efficiency and provide some redundancy against partial failure. USDCs and related apparatuses were conceived for boring into, and/or acquiring samples of, rock or other hard, brittle materials of geological interest. They have been described in numerous previous NASA Tech Briefs articles. To recapitulate: A USDC can be characterized as a lightweight, lowpower, piezoelectrically driven jackhammer in which ultrasonic and sonic vibrations are generated and coupled to a tool bit. A basic USDC includes a piezoelectric stack, an ultrasonic transducer horn connected to the stack, a free mass ( free in the sense that it can bounce axially a short distance between hard stops on the horn and the bit), and a tool bit. The piezoelectric stack creates ultrasonic vibrations that are mechanically amplified by the horn. The bouncing of the free mass between the hard stops generates the sonic vibrations. The combination of ultrasonic and sonic vibrations gives rise to a hammering action (and a resulting chiseling action at the tip of the tool bit) that is more effective for drilling than is the microhammering action of ultrasonic vibrations alone. The hammering and chiseling actions are so effective that unlike in conventional twist drilling, little applied axial force is needed to make the apparatus advance into the material of interest. There are numerous potential applications for USDCs and related apparatuses in geological exploration on Earth and on remote planets. In early USDC experiments, it was observed that accumulation of cuttings in a drilled hole causes the rate of penetration of the USDC to decrease steeply with depth, and that the rate of penetration can be increased by removing the cuttings. The USRoHD concept provides for removal of cuttings in the same manner as that of a twist drill: An USRoHD includes a USDC and a motor with gearhead (see figure). The USDC provides the bit hammering and the motor provides the bit rotation. Like a twist drill bit, the shank of the tool bit of the USRoHD is fluted. As in the operation of a twist drill, the rotation of the fluted drill bit removes cuttings from the drilled hole. The USRoHD tool bit is tipped with a replaceable crown having cutting teeth on its front surface. The teeth are shaped to promote fracturing of the rock face through a combination of hammering and rotation of the tool bit. Helical channels on the outer cylindrical surface of the crown serve as a continuation of the fluted surface of the shank, helping to remove cuttings. In the event of a failure of the USDC, the USRoHD can continue to operate with reduced efficiency as a twist drill. Similarly, in the event of a failure of the gearmotor, the USRoHD can continue to operate with reduced efficiency as a USDC.

Doing It All: Michael Sullivan--Weeks Public Library, NH

ERIC Educational Resources Information Center

Library Journal, 2005

2005-01-01

Michael Sullivan is a juggler--not a metaphorical one, a real one. He's also a library director, storyteller, competitive chess player, poet, speaker, and former children's librarian who continues to work with the kids in his community. This article summarizes the accomplishments and work of Michael Sullivan.

Michael J. Meaney: Award for Distinguished Scientific Contributions

ERIC Educational Resources Information Center

American Psychologist, 2012

2012-01-01

Presents Michael J. Meaney as one of the winners of the American Psychological Association's Award for Distinguished Scientific Contributions (2012). Michael J. Meaney has taken the phenomenon of "handling" of newborn rats and opened a new area of investigation that has given new meaning to epigenetics via his work demonstrating transgenerational…

Jack Michael's Motivation

ERIC Educational Resources Information Center

Miguel, Caio F.

2013-01-01

Among many of Jack Michael's contributions to the field of behavior analysis is his behavioral account of motivation. This paper focuses on the concept of "motivating operation" (MO) by outlining its development from Skinner's (1938) notion of "drive." Conceptually, Michael's term helped us change our focus on…

75 FR 22436 - Michael Williams-Control Exemption-St. Maries River Railroad, Inc.

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-28

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35365] Michael Williams-Control Exemption-St. Maries River Railroad, Inc. Michael Williams (applicant),\\1\\ a noncarrier, has filed a verified notice of exemption to acquire control of St. Maries River Railroad, Inc. (STMA), a Class...

Studying Teachers and Schools: Michael Pressley's Legacy and Directions for Future Research

ERIC Educational Resources Information Center

Mohan, Lindsey; Lundeberg, Mary A.; Reffitt, Kelly

2008-01-01

Much of Michael Pressley's work during the past decade focused on the nature of highly effective, engaging literacy instruction. Michael Pressley believed that studying effective teachers and schools had the potential to influence more engaging and effective teaching, especially in underresourced schools. First, we describe the grounded…

Language and Intercultural Education: An Interview with Michael Byram

ERIC Educational Resources Information Center

Porto, Melina

2013-01-01

This article reports an interview with Michael Byram, Professor Emeritus, University of Durham in the United Kingdom, during his visit to Argentina in September 2011. Michael Byram is one of the main international referents in intercultural education. The interview addresses issues such as language education, intercultural and citizenship…

Racemic hemiacetals as oxygen-centered pronucleophiles triggering cascade 1,4-addition/Michael reaction through dynamic kinetic resolution under iminium catalysis. Development and mechanistic insights† †Electronic supplementary information (ESI) available: Detailed experimental procedures and characterization of all new compounds, including copies of NMR spectra and HPLC chromatograms traces, computational details and Cartesian coordinates of all stationary points. CCDC 1525188 (4l), 1525189 (6a) and 1525190 (9a). For ESI and crystallographic data in CIF or other electronic format see DOI: 10.1039/c7sc00009j Click here for additional data file. Click here for additional data file.

PubMed Central

Orue, Ane; Uria, Uxue; Roca-López, David; Delso, Ignacio; Reyes, Efraím; Carrillo, Luisa

2017-01-01

2-Hydroxydihydropyran-5-ones behave as excellent polyfunctional reagents able to react with enals through oxa-Michael/Michael process cascade under the combination of iminium and enamine catalysis. These racemic hemiacetalic compounds are used as unconventional O-pronucleophiles in the initial oxa-Michael reaction, also leading to the formation of a single stereoisomer under a dynamic kinetic resolution (DKR) process. Importantly, by using β-aryl or β-alkyl substituted α,β-unsaturated substrates as initial Michael acceptors either kinetically or thermodynamically controlled diastereoisomers were formed with high stereoselection through the careful selection of the reaction conditions. Finally, a complete experimental and computational study confirmed the initially proposed DKR process during the catalytic oxa-Michael/Michael cascade reaction and also explained the kinetic/thermodynamic pathway operating in each case. PMID:28451356

Yaruss, Coleman, and Hammer (2006): an exemplar of non-evidence-based practice in stuttering treatment.

PubMed

Ingham, Roger J

2007-07-01

This letter is a response to a recent report by J. S. Yaruss, C. Coleman, and D. Hammer (2006) that described a treatment program for preschool children who stutter. Problems with the Yaruss et al. study fall into four domains: (a) failure to provide clinicians with replicable procedures, (b) failure to collect valid and reliable speech performance data, (c) failure to control for predictable improvement in children who have been stuttering for less than 15 months, and (d) the advocacy of procedures for which there is no credible research evidence. The claims made for the efficacy of this treatment are problematic and essentially violate the principles of evidence-based practice as recommended by the American Speech-Language-Hearing Association (ASHA).

Hazardous Materials Management and Emergency Response Training Center at Hanford

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ollero, J.; Muth, G.; Bergland, R.

1994-12-31

The Hanford Site will provide high-fidelity training using simulated job-site situations to prepare workers for known and unknown hazards. Hanford is developing the Hazardous Materials Management and Emergency Response (HAMMER) Training Center to operate as a user facility for the site, region and international labor unions. The center will focus on providing hands-on, realistic training situations. The Training Center is a partnership among U.S. Department of Energy (DOE); its contractors; labor; local, state, and tribal governments; Xavier and Tulane Universities of Louisiana and other Federal agencies. The hands-on training aids at HAMMER is justified based on regulatory training requirements, themore » desire for enhanced safety, and the commitment to continuous improvement of training quality.« less

Impact of self-funding on patient experience of oral anticoagulation self-monitoring: a qualitative study

PubMed Central

Tompson, Alice; Heneghan, Carl; Sutton, Stephen; Fitzmaurice, David; Ward, Alison

2016-01-01

Objective To explore the impact self-funding has on patient experience of oral anticoagulation therapy self-monitoring. Design Semistructured, qualitative interviews were conducted. Transcripts were analysed thematically using constant comparison. Setting England. Participants Interviewees were participants of the Cohort Study of Anticoagulation Self-Monitoring (CASM). Cohort members were recruited as they bought a monitor from the major manufacturer in the UK. A purposive sample was invited to be interviewed on completion of the 12-month cohort follow-up. Data Patient narratives on their experiences of self-monitoring their oral anticoagulation therapy in non-trial conditions. Results 26 interviews were completed. Interviewees viewed purchasing the monitoring device as a long-term commitment balancing the limitations of clinic-based monitoring against the cost. They were unable to try out the monitor prior to purchase and therefore had to be confident in their own ability to use it. The variable provision of self-monitoring equipment caused resentment, and interviewees were uncomfortable negotiating with healthcare professionals. High test strip usage while learning how to use the monitor caused anxiety that was exacerbated by worries about their cost. However, self-funding did mean that interviewees felt a sense of ownership and were determined to persevere to overcome problems. Conclusions Self-funding has negative implications in terms of equity of access; however, the money invested acts as a barrier to discontinuation. If oral anticoagulation therapy self-monitoring devices and consumables were provided free of charge in routine care, the training and support available in England may need to be reviewed to prevent discontinuation rates rising to those observed in clinical trials. PMID:28011812

Use of strategies to improve retention in primary care randomised trials: a qualitative study with in-depth interviews.

PubMed

Brueton, V C; Stevenson, F; Vale, C L; Stenning, S P; Tierney, J F; Harding, S; Nazareth, I; Meredith, S; Rait, G

2014-01-24

To explore the strategies used to improve retention in primary care randomised trials. Qualitative in-depth interviews and thematic analysis. 29 UK primary care chief and principal investigators, trial managers and research nurses. In-depth face-to-face interviews. Primary care researchers use incentive and communication strategies to improve retention in trials, but were unsure of their effect. Small monetary incentives were used to increase response to postal questionnaires. Non-monetary incentives were used although there was scepticism about the impact of these on retention. Nurses routinely used telephone communication to encourage participants to return for trial follow-up. Trial managers used first class post, shorter questionnaires and improved questionnaire designs with the aim of improving questionnaire response. Interviewees thought an open trial design could lead to biased results and were negative about using behavioural strategies to improve retention. There was consensus among the interviewees that effective communication and rapport with participants, participant altruism, respect for participant's time, flexibility of trial personnel and appointment schedules and trial information improve retention. Interviewees noted particular challenges with retention in mental health trials and those involving teenagers. The findings of this qualitative study have allowed us to reflect on research practice around retention and highlight a gap between such practice and current evidence. Interviewees describe acting from experience without evidence from the literature, which supports the use of small monetary incentives to improve the questionnaire response. No such evidence exists for non-monetary incentives or first class post, use of which may need reconsideration. An exploration of barriers and facilitators to retention in other research contexts may be justified.

Use of strategies to improve retention in primary care randomised trials: a qualitative study with in-depth interviews

PubMed Central

Brueton, V C; Stevenson, F; Vale, C L; Stenning, S P; Tierney, J F; Harding, S; Nazareth, I; Meredith, S; Rait, G

2014-01-01

Objective To explore the strategies used to improve retention in primary care randomised trials. Design Qualitative in-depth interviews and thematic analysis. Participants 29 UK primary care chief and principal investigators, trial managers and research nurses. Methods In-depth face-to-face interviews. Results Primary care researchers use incentive and communication strategies to improve retention in trials, but were unsure of their effect. Small monetary incentives were used to increase response to postal questionnaires. Non-monetary incentives were used although there was scepticism about the impact of these on retention. Nurses routinely used telephone communication to encourage participants to return for trial follow-up. Trial managers used first class post, shorter questionnaires and improved questionnaire designs with the aim of improving questionnaire response. Interviewees thought an open trial design could lead to biased results and were negative about using behavioural strategies to improve retention. There was consensus among the interviewees that effective communication and rapport with participants, participant altruism, respect for participant's time, flexibility of trial personnel and appointment schedules and trial information improve retention. Interviewees noted particular challenges with retention in mental health trials and those involving teenagers. Conclusions The findings of this qualitative study have allowed us to reflect on research practice around retention and highlight a gap between such practice and current evidence. Interviewees describe acting from experience without evidence from the literature, which supports the use of small monetary incentives to improve the questionnaire response. No such evidence exists for non-monetary incentives or first class post, use of which may need reconsideration. An exploration of barriers and facilitators to retention in other research contexts may be justified. PMID:24464427

Current use of wild plants with edible underground storage organs in a rural population of Patagonia: between tradition and change.

PubMed

Ochoa, Juan José; Ladio, Ana Haydee

2015-09-25

Edible plants with underground storage organs (USOs) are neglected resources. We studied the local ecological knowledge edible plants with (USOs) in rural populations of North-Patagonia in order to establish how people are utilizing these plants. Some aspect of corpus-praxis-cosmos complex associated to the local ecological knowledge was documented and discussed. In addition, variation in this ecological knowledge due to age, gender, family structure, ethnic self-determination was also evaluated. Semi-structured interviews were conducted with 51 inhabitants in order to study the relationship between the current use of plants with USOs and the age, sex, family group composition and ethnic self-identification of interviewees. In addition, the Cultural Importance Index for each species was calculated. The current richness of known species in these populations is a total of 9 plants. Plants with USOs tend to be used more frequently as the age of the interviewee increases. Women and men showed no differences in the average richness of species cited. The interviewees who share their homes with other generations use these plants more frequently than those who live alone. Our results indicate that the interviewees who identified themselves as belonging to the Mapuche people use these plants more frequently. For the Mapuche people, wild plants have constituted material and symbolic resources of great importance in their historical subsistence. In addition, they are currently being redefined as elements which present a connection with ancestral practices, produce a strong relationship with the 'land', and become markers which identify the 'natural' (historical) ways of their people; these are key elements in the current political processes of identity revaluation. This research is valuable to stimulate cultural revival and health promotion programs in the communities with their own local, cultural food.

Expertise among professional magicians: an interview study.

PubMed

Rissanen, Olli; Pitkänen, Petteri; Juvonen, Antti; Kuhn, Gustav; Hakkarainen, Kai

2014-01-01

The purpose of the present investigation was to analyse interviews of highly regarded Finnish magicians. Social network analysis (N = 120) was used to identify Finland's most highly regarded magicians (N = 16). The selected participants' careers in professional magic and various aspects of their professional conduct were examined by relying on semi-structured interviews. The results revealed that cultivation of professional level competence in magic usually requires an extensive period of time compared with other domains of expertise. Magic is a unique performing art and it differs from other professions focusing on deceiving the audience. A distinctive feature of magical expertise is that the process takes place entirely through informal training supported by communities of magical practitioners. Three interrelated aspects of magical activity were distinguished: magic tricks, performance, and audience. Although magic tricks constitute a central aspect of magic activity, the participants did not talk about their tricks extensively; this is in accordance with the secretive nature of magic culture. The interviews revealed that a core aspect of the magicians' activity is performance in front of an audience that repeatedly validates competence cultivated through years of practice. The interviewees reported investing a great deal of effort in planning, orchestrating, and reflecting on their performances. Close interaction with the audience plays an important role in most interviewees' activity. Many participants put a great deal of effort in developing novel magic tricks. It is common to borrow magic effects from fellow magicians and develop novel methods of implementation. Because magic tricks or programs are not copyrighted, many interviewees considered "stealing" an unacceptable and unethical aspect of magical activity. The interviewees highlighted the importance of personality and charisma in the successful pursuit of magic activity.

Developing a speciality: regearing the specialist public health workforce.

PubMed

Chapman, J; Abbott, S; Carter, Y H

2005-03-01

To identify issues surrounding the future training needs of the specialist public health workforce following the most recent restructuring of the National Health Service (NHS) in England. All directors of public health (DsPH) based in strategic health authorities and nine senior staff working in public health at the regional level were invited to participate in a semi-structured telephone interview. Twenty-six people were interviewed. Many interviewees expressed concern that because consultants and specialists in public health will be working in much smaller teams than hitherto, they will have to generalize their skills to cover a much wider range of functions (including board-level duties). This may result in a loss of specialist expertise. Successful public health practice in the new structures will require new ways of interorganizational working that will add an administrative burden to specialists in public health. Also, the creation of a board-level post in each primary care trust (PCT) has resulted in more time spent on corporate responsibilities and less on public health for DsPH, who are often the only fully trained specialist in public health in their PCT. Furthermore, interviewees expressed their anxiety about the lack of diversity in the posts available to specialists in public health and particularly to those newly completing their specialist training. Generally, interviewees felt that traditional public health roles and responsibilities were being eclipsed by corporate and managerial ones. Professional development activities were being carried out, but in a rather ad-hoc fashion. Interviewees were hopeful that public health networks would lead professional development initiatives once they were more established. It is important that excellence in public health is maintained through a set of accreditable standards, whilst corporate skills, essential to successful public health practice in the new UK NHS, are developed among specialists in public health.

Expertise among professional magicians: an interview study

PubMed Central

Rissanen, Olli; Pitkänen, Petteri; Juvonen, Antti; Kuhn, Gustav; Hakkarainen, Kai

2014-01-01

The purpose of the present investigation was to analyse interviews of highly regarded Finnish magicians. Social network analysis (N = 120) was used to identify Finland's most highly regarded magicians (N = 16). The selected participants' careers in professional magic and various aspects of their professional conduct were examined by relying on semi-structured interviews. The results revealed that cultivation of professional level competence in magic usually requires an extensive period of time compared with other domains of expertise. Magic is a unique performing art and it differs from other professions focusing on deceiving the audience. A distinctive feature of magical expertise is that the process takes place entirely through informal training supported by communities of magical practitioners. Three interrelated aspects of magical activity were distinguished: magic tricks, performance, and audience. Although magic tricks constitute a central aspect of magic activity, the participants did not talk about their tricks extensively; this is in accordance with the secretive nature of magic culture. The interviews revealed that a core aspect of the magicians' activity is performance in front of an audience that repeatedly validates competence cultivated through years of practice. The interviewees reported investing a great deal of effort in planning, orchestrating, and reflecting on their performances. Close interaction with the audience plays an important role in most interviewees' activity. Many participants put a great deal of effort in developing novel magic tricks. It is common to borrow magic effects from fellow magicians and develop novel methods of implementation. Because magic tricks or programs are not copyrighted, many interviewees considered “stealing” an unacceptable and unethical aspect of magical activity. The interviewees highlighted the importance of personality and charisma in the successful pursuit of magic activity. PMID:25566156

78 FR 2391 - CAlifornians for Renewable Energy, Inc., Michael E. Boyd, Robert M. Sarvey v. Pacific Gas and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-11

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. RP13-436-000] CAlifornians for Renewable Energy, Inc., Michael E. Boyd, Robert M. Sarvey v. Pacific Gas and Electric Company... Energy Regulatory Commission (FERC); CAlifornians for Renewable Energy, Inc., Michael E. Boyd, and Robert...

Interview with Michael Apple: The Biography of a Public Intellectual

ERIC Educational Resources Information Center

Peters, Michael A.

2015-01-01

Michael W. Apple is the John Bascom Professor of Curriculum and Instruction and Educational Policy Studies in the Departments of Curriculum and Instruction (CI) and Educational Policy Studies (EPS) at the University of Wisconsin-Madison School of Education where he has taught since 1970. Michael Apple is one of the foremost educational theorists…

Markets, Marx, Modernity and Mathematics Education: A Response to Michael Apple.

ERIC Educational Resources Information Center

Gates, Peter

This paper is a response to Michael Apple's paper, "What Postmodernists Forget: Cultural Capital and Official Knowledge." The paper advocates Michael's identification of the current dangers and processes of the growth of new right ideologies in the development of subjectivity, society, and education. The differences in success in the education…

77 FR 61596 - Wheatley, Michael I.; Garrison, Drummond E.; Notice of Filing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-10

...] Wheatley, Michael I.; Garrison, Drummond E.; Notice of Filing Take notice that on September 28, 2012, Michael I. Wheatley and Drummond E. Garrison submitted for filing, an application for authority to hold... the ``eFiling'' link at http://www.ferc.gov . Persons unable to file electronically should submit an...

76 FR 624 - Proposed Information Collection (Patient Satisfaction Survey Michael E. DeBakey Home Care Program...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-05

... Collection (Patient Satisfaction Survey Michael E. DeBakey Home Care Program) Activity: Comment Request... Form 10-0476).'' SUPPLEMENTARY INFORMATION: Title: Patient Satisfaction Survey Michael E. DeBakey Home... satisfaction with the quality of services/care provided by home care program staff. An agency may not conduct...

NASA Catches Tropical Storm Leslie and Hurricane Michael in the Atlantic

NASA Image and Video Library

2017-12-08

This visible image of Tropical Storm Leslie and Hurricane Michael was taken by the MODIS instrument aboard both NASA's Aqua and Terra satellites on Sept. 9 at 12:50 p.m. EDT. Credit: NASA Goddard/MODIS Rapid Response Team -- Satellite images from two NASA satellites were combined to create a full picture of Tropical Storm Leslie and Hurricane Michael spinning in the Atlantic Ocean. Imagery from NASA's Aqua and Terra satellites showed Leslie now past Bermuda and Michael in the north central Atlantic, and Leslie is much larger than the smaller, more powerful Michael. Images of each storm were taken by the Moderate Resolution Imaging Spectroradiometer, or MODIS instrument that flies onboard both the Aqua and Terra satellites. Both satellites captured images of both storms on Sept. 7 and Sept. 10. The image from Sept. 7 showed a much more compact Michael with a visible eye. By Sept. 10, the eye was no longer visible in Michael and the storm appeared more elongated from south to north. To continue reading go to: 1.usa.gov/NkUPqn NASA image use policy. NASA Goddard Space Flight Center enables NASA’s mission through four scientific endeavors: Earth Science, Heliophysics, Solar System Exploration, and Astrophysics. Goddard plays a leading role in NASA’s accomplishments by contributing compelling scientific knowledge to advance the Agency’s mission. Follow us on Twitter Like us on Facebook Find us on Instagram

Interview with J. Michael Thompson

ERIC Educational Resources Information Center

Randall, Mary Elisabeth

2004-01-01

J. Michael Thompson is the Vice Provost for Enrollment Management and Dean of Admission and Financial Aid at the University of Southern California. J. Michael has worked in higher education for more than 30 years in a variety of roles at small private and mid-sized and large public universities, and now at USC, a large private university. He has…

Veteran’s Health Care Issues

DTIC Science & Technology

2007-11-30

Affairs Dr. Michael J. Kussman , in U.S. Congress, House Committee on Veterans’ Affairs Subcommittee on Oversight and Investigations, hearing on...Health, Department of Veterans Affairs, Michael Kussman , in U.S. Congress, House Committee on Appropriations, Subcommittee on Military Construction...Department of Veterans Affairs Dr. Michael J. Kussman , in U.S. Congress, House Committee on Veterans’ Affairs Subcommittee on Oversight and

78 FR 6851 - Proposed Information Collection (Patient Satisfaction Survey Michael E. DeBakey Home Care Program...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-31

... (Patient Satisfaction Survey Michael E. DeBakey Home Care Program) Activity: Comment Request AGENCY... Satisfaction Survey Michael E. DeBakey Home Care Program, VA Form 10-0476. OMB Control Number: 2900-0775. Type... gather feedback from patients regarding their satisfaction with the quality of services/care provided by...

Michael Young and the Curriculum Field in South Africa

ERIC Educational Resources Information Center

Hoadley, Ursula

2015-01-01

The paper addresses the question of what we should make of Michael Young's recent work with respect to curriculum theory by considering the particular case of South African curriculum reform. The paper thus traces two trajectories: the evolution of Michael Young's ideas over time and South African curriculum reform in the post-apartheid period.…

Incentives and intrinsic motivation in healthcare.

PubMed

Berdud, Mikel; Cabasés, Juan M; Nieto, Jorge

It has been established in the literature that workers within public organisations are intrinsically motivated. This paper is an empirical study of the healthcare sector using methods of qualitative analysis research, which aims to answer the following hypotheses: 1) doctors are intrinsically motivated; 2) economic incentives and control policies may undermine doctors' intrinsic motivation; and 3) well-designed incentives may encourage doctors' intrinsic motivation. We conducted semi-structured interviews à-la-Bewley with 16 doctors from Navarre's Healthcare Service (Servicio Navarro de Salud-Osasunbidea), Spain. The questions were based on current theories of intrinsic motivation and incentives to test the hypotheses. Interviewees were allowed to respond openly without time constraints. Relevant information was selected, quantified and analysed by using the qualitative concepts of saturation and codification. The results seem to confirm the hypotheses. Evidence supporting hypotheses 1 and 2 was gathered from all interviewees, as well as indications of the validity of hypothesis 3 based on interviewees' proposals of incentives. The conclusions could act as a guide to support the optimal design of incentive policies and schemes within health organisations when healthcare professionals are intrinsically motivated. Copyright © 2016 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

Metamodeling and optimization of the THF process with pulsating pressure

NASA Astrophysics Data System (ADS)

Bucconi, Marco; Strano, Matteo

2018-05-01

Tube hydroforming is a process used in various applications to form the tube in a desired complex shape, by combining the use of internal pressure, which provides the required stress to yield the material, and axial feeding, which helps the material to flow towards the bulging zone. In many studies it has been demonstrated how wrinkling and bursting defects can be severely reduced by means of a pulsating pressure, and how the so-called hammering hydroforming enhances the formability of the material. The definition of the optimum pressure and axial feeding profiles represent a daunting challenge in the designing phase of the hydroforming operation of a new part. The quality of the formed part is highly dependent on the amplitude and the peak value of the pulsating pressure, along with the axial stroke. In this paper, a research is reported, conducted by means of explicit finite element simulations of a hammering THF operation and metamodeling techniques aimed at optimizing the process parameters for the production of a complex part. The improved formability is explored for different factors and an optimization strategy is used to determine the most convenient pressure and axial feed profile curves for the hammering THF process of the examined part. It is shown how the pulsating pressure allows the minimization of the energy input in the process, still respecting final quality requirements.

A comparison of impact force reduction by polymer materials used for mouthguard fabrication.

PubMed

Gawlak, Dominika; Mańka-Malara, Katarzyna; Mierzwińska-Nastalska, Elżbieta; Gieleta, Roman; Kamiński, Tomasz; Łuniewska, Magdalena

2017-01-01

The essential function of mouthguards is protection against the effects of injuries sustained during sports activities. This purpose will be successfully achieved if appropriate materials ensuring sufficient reduction of the injury force are used for mouthguard fabrication. The objective of the study was to investigate the force reduction capability of selected materials as well as to identify which material reduces the impact force to the highest degree. The material for the study were samples of polymers (6 samples in total), obtained during the process of deep pressing (2 samples), flasking (3 samples) and thermal injection (1 sample), which were tested for impact force damping using an impact device - Charpy impact hammer. The control group comprised of the ceramic material samples subjected to the hammer impact. The statistical analysis applied in this study were one-way Welch ANOVA with post-hoc Games-Howell pairwise comparisons. The test materials reduced the impact force of the impact hammer to varying degrees. The greatest damping capability was demonstrated for the following materials: Impak with 1:1 powder-to-liquid weight ratio polymerized with the conventional flasking technique, and Corflex Orthodontic used in the thermal injection technique of mouthguard fabrication. Impak with 1:1 weight ratio and Corflex Orthodontic should be recommended for the fabrication of mouthguards since they demonstrated the most advantageous damping properties.

Guided earth boring tool

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mc Donald, W.J.; Pittard, G.T.; Maurer, W.C.

A controllable tool for drilling holes in the earth is described comprising a hollow elongated rigid supporting drill pipe having a forward end for entering the earth, means supporting the drill pipe for earth boring or piercing movement, including means for moving the drill pipe longitudinally for penetrating the earth, the drill pipe moving means being constructed to permit addition and removal of supporting drill pipe during earth penetrating operation, a boring mole supported on the forward end of the hollow low drill pipe comprising a cylindrical housing supported on and open to the forward end of the drill pipe,more » a first means on the front end for applying a boring force to the soil comprising an anvil having a striking surface inside the housing and a boring surface outside the housing, a second means comprising a reciprocally movable hammer positioned in the housing to apply a percussive force to the anvil striking surface for transmitting a percussive force to the boring force applying means, and means permitting introduction of air pressure supplied through the hollow pipe into the housing for operating the hammer and for discharging spent air from the housing to the hole being bored, and the tool being operable to penetrate the earth upon longitudinal movement of the drill rod by the longitudinal rod moving means and operation of the mole by reciprocal movement of the hammer.« less

Production of a high-velocity water slug using an impacting technique.

PubMed

Dehkhoda, S; Bourne, N K

2014-02-01

A pulsed water jet consists of a series of discrete water slugs travelling at high velocity. Immediately after striking a target, these slugs apply high-intensity, short-duration transient stress pulses reaching an amplitude known as the water hammer pressure, followed by low-intensity, long-duration stationary stress at a lower stagnation pressure. The magnitude and duration of the water hammer and stagnation pressures are controlled by the size and quality of the water slugs. The use of water jets for rock cutting in mining operations is a centuries-old technology; however, practical methods for producing high-energy water slugs repeatedly have proven difficult. This can be partly due to the fact that the geometrical properties of a jet and so its effectiveness in creating damage is controlled and influenced by the method that is employed to generate the water slugs. This paper investigates the quality of a single water slug produced using an impacting technique where a hammer strikes a piston, resting on top of a water-filled chamber. The coherence and integrity of the jet core was of concern in this study. The impact impulse of the formed water jet was measured in a Kel-F target material using an embedded PVDF (Polyvinylidene fluoride) shock gauge. The recorded stress waveform was then used to determine the unity and endurance of the water slug stream once travelled through air.

Production of a high-velocity water slug using an impacting technique

NASA Astrophysics Data System (ADS)

Dehkhoda, S.; Bourne, N. K.

2014-02-01

A pulsed water jet consists of a series of discrete water slugs travelling at high velocity. Immediately after striking a target, these slugs apply high-intensity, short-duration transient stress pulses reaching an amplitude known as the water hammer pressure, followed by low-intensity, long-duration stationary stress at a lower stagnation pressure. The magnitude and duration of the water hammer and stagnation pressures are controlled by the size and quality of the water slugs. The use of water jets for rock cutting in mining operations is a centuries-old technology; however, practical methods for producing high-energy water slugs repeatedly have proven difficult. This can be partly due to the fact that the geometrical properties of a jet and so its effectiveness in creating damage is controlled and influenced by the method that is employed to generate the water slugs. This paper investigates the quality of a single water slug produced using an impacting technique where a hammer strikes a piston, resting on top of a water-filled chamber. The coherence and integrity of the jet core was of concern in this study. The impact impulse of the formed water jet was measured in a Kel-F target material using an embedded PVDF (Polyvinylidene fluoride) shock gauge. The recorded stress waveform was then used to determine the unity and endurance of the water slug stream once travelled through air.

Covalent Modifiers: A Chemical Perspective on the Reactivity of α,β-Unsaturated Carbonyls with Thiols via Hetero-Michael Addition Reactions.

PubMed

Jackson, Paul A; Widen, John C; Harki, Daniel A; Brummond, Kay M

2017-02-09

Although Michael acceptors display a potent and broad spectrum of bioactivity, they have largely been ignored in drug discovery because of their presumed indiscriminate reactivity. As such, a dearth of information exists relevant to the thiol reactivity of natural products and their analogues possessing this moiety. In the midst of recently approved acrylamide-containing drugs, it is clear that a good understanding of the hetero-Michael addition reaction and the relative reactivities of biological thiols with Michael acceptors under physiological conditions is needed for the design and use of these compounds as biological tools and potential therapeutics. This Perspective provides information that will contribute to this understanding, such as kinetics of thiol addition reactions, bioactivities, as well as steric and electronic factors that influence the electrophilicity and reversibility of Michael acceptors. This Perspective is focused on α,β-unsaturated carbonyls given their preponderance in bioactive natural products.

Golfer's Elbow

MedlinePlus

... your elbow can cause golfer's elbow. This includes painting, raking, hammering, chopping wood, using a computer, doing ... using older golfing irons, consider upgrading to lighter graphite clubs. If you play tennis, a racket with ...

77 FR 30047 - Notice of Opportunity for Public Comment on Surplus Property Release at Michael J Smith Field...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-21

... Comment on Surplus Property Release at Michael J Smith Field, Beaufort, NC AGENCY: Federal Aviation... J Smith Field, be used for aeronautical purposes. DATES: Comments must be received on or before June... property at the Michael J Smith Field. The property consists of one parcel located on the north side of...

Fundamental Research on Percussion Drilling: Improved rock mechanics analysis, advanced simulation technology, and full-scale laboratory investigations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michael S. Bruno

This report summarizes the research efforts on the DOE supported research project Percussion Drilling (DE-FC26-03NT41999), which is to significantly advance the fundamental understandings of the physical mechanisms involved in combined percussion and rotary drilling, and thereby facilitate more efficient and lower cost drilling and exploration of hard-rock reservoirs. The project has been divided into multiple tasks: literature reviews, analytical and numerical modeling, full scale laboratory testing and model validation, and final report delivery. Literature reviews document the history, pros and cons, and rock failure physics of percussion drilling in oil and gas industries. Based on the current understandings, a conceptualmore » drilling model is proposed for modeling efforts. Both analytical and numerical approaches are deployed to investigate drilling processes such as drillbit penetration with compression, rotation and percussion, rock response with stress propagation, damage accumulation and failure, and debris transportation inside the annulus after disintegrated from rock. For rock mechanics modeling, a dynamic numerical tool has been developed to describe rock damage and failure, including rock crushing by compressive bit load, rock fracturing by both shearing and tensile forces, and rock weakening by repetitive compression-tension loading. Besides multiple failure criteria, the tool also includes a damping algorithm to dissipate oscillation energy and a fatigue/damage algorithm to update rock properties during each impact. From the model, Rate of Penetration (ROP) and rock failure history can be estimated. For cuttings transport in annulus, a 3D numerical particle flowing model has been developed with aid of analytical approaches. The tool can simulate cuttings movement at particle scale under laminar or turbulent fluid flow conditions and evaluate the efficiency of cutting removal. To calibrate the modeling efforts, a series of full-scale fluid hammer drilling tests, as well as single impact tests, have been designed and executed. Both Berea sandstone and Mancos shale samples are used. In single impact tests, three impacts are sequentially loaded at the same rock location to investigate rock response to repetitive loadings. The crater depth and width are measured as well as the displacement and force in the rod and the force in the rock. Various pressure differences across the rock-indentor interface (i.e. bore pressure minus pore pressure) are used to investigate the pressure effect on rock penetration. For hammer drilling tests, an industrial fluid hammer is used to drill under both underbalanced and overbalanced conditions. Besides calibrating the modeling tool, the data and cuttings collected from the tests indicate several other important applications. For example, different rock penetrations during single impact tests may reveal why a fluid hammer behaves differently with diverse rock types and under various pressure conditions at the hole bottom. On the other hand, the shape of the cuttings from fluid hammer tests, comparing to those from traditional rotary drilling methods, may help to identify the dominant failure mechanism that percussion drilling relies on. If so, encouraging such a failure mechanism may improve hammer performance. The project is summarized in this report. Instead of compiling the information contained in the previous quarterly or other technical reports, this report focuses on the descriptions of tasks, findings, and conclusions, as well as the efforts on promoting percussion drilling technologies to industries including site visits, presentations, and publications. As a part of the final deliveries, the 3D numerical model for rock mechanics is also attached.« less

INTERIOR VIEW OF ENTRANCE TO LABORATORY, SHOWING HANDHAMMERED ALUMINUM DOORS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

INTERIOR VIEW OF ENTRANCE TO LABORATORY, SHOWING HAND-HAMMERED ALUMINUM DOORS AND MARBLE. NOTE ALUMINUM LIGHT FIXTURE - Alcoa Research Laboratory, Freeport Road, New Kensington, Westmoreland County, PA

Elbow replacement - discharge

MedlinePlus

... hammering. Do impact sports, such as boxing or football. Do physical activities that need quick stop and ... herein should not be used during any medical emergency or for the diagnosis or treatment of any ...

DefenseLink Feature: Chairman Visits Japan and Republic of Korea, Nov. 5-8,

Science.gov Websites

Staff Navy Adm. Michael G. Mullen answers questions at a press availability with local media following Staff Navy Adm. Michael G. Mullen visits greets marines and staff assigned to the U.S. Embassy, Tokyo the Joint Chiefs of Staff U.S. Navy Adm. Michael G. Mullen, right, and Japanese Chief of Defense Adm

Institutional Conservation Program evaluation project: Results of higher education survey pretest

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bernard, M.J. III; Collins, N.E.; Ettinger, G.

Teams from Argonne National Laboratory, Lawrence Berkeley Laboratory, and the US Department of Energy visited 14 colleges and universities to pretest a survey instrument that will be mailed to all US colleges and universities to solicit information about energy conservation activities and decision-making processes. The results of the pretest, the final higher education questionnaire, and implications for an elementary and secondary education questionnaire are the primary subjects of this report. Because interviewees offered anecdotes and advice about equipment, management, finances, and maintenance that may be useful to others, narrative summaries of each visit are included. The report also contains themore » interviewees' responses to the pretest questions.« less

Theme: Employee Ownership.

ERIC Educational Resources Information Center

Gordon, Michael E.; And Others

1991-01-01

Includes "Introduction" (Gordon); "Employee Ownership: Opportunities for Unions" (Blasi, Kruse); "Participation, Control, and Performance" (Rosen); Beyond the Contract: Taking on Ownership" (Mackin); "Worker Participation on Boards of Directors" (Hammer); and "Case Study of Employee Ownership and…

Covalent Modifiers: A Chemical Perspective on the Reactivity of α,β-Unsaturated Carbonyls with Thiols via Hetero-Michael Addition Reactions

PubMed Central

Jackson, Paul A.; Widen, John C.; Harki, Daniel A.; Brummond, Kay M.

2017-01-01

Although Michael acceptors display a potent and broad spectrum of bioactivity, they have largely been ignored in drug discovery because of their presumed indiscriminate reactivity. As such, a dearth of information exists relevant to the thiol reactivity of natural products and their analogs possessing this moiety. In the midst of recently approved acrylamide-containing drugs, it is clear that a good understanding of the hetero-Michael addition reaction and the relative reactivities of biological thiols with Michael acceptors under physiological conditions is needed for the design and use of these compounds as biological tools and potential therapeutics. This perspective provides information that will contribute to this understanding, such as kinetics of thiol addition reactions, bioactivities, as well as steric and electronic factors that influence the electrophilicity and reversibility of Michael acceptors. This perspective is focused on α,β-unsaturated carbonyls given their preponderance in bioactive natural products. PMID:27996267

Strategic Studies Quarterly. Volume 8, Number 3, Fall 2014

DTIC Science & Technology

2014-01-01

Michael Guillot Measuring Military Power James Jay Carafano Strategy and Force Planning in a Time of Austerity BG Michael J . Meese, USA, Retired...Hudson, PhD Nori Katagiri, PhD Paul J . Springer, PhD Zachary J . Zwald, PhD Strategic Studies Quarterly (SSQ) (ISSN 1936-1815) is published quarterly...19 BG Michael J . Meese, USA, Retired Pensive Sword: Educating Officers in Austere Times ...................... 30 Stephen D. Chiabotti Feature

DefenseLink.mil - Pentagon Memorial Dedication

Science.gov Websites

Dept. photo by Army Staff Sgt. Michael J. Carden An entry stone at the Pentagon Memorial lists the their lives during the Sept. 11 terrorist attack on the Pentagon. Photo by Staff Sgt. Michael J. Carden Staff Sgt. Michael J. Carden A member of The United States Air Force Band practices before the start of

Hearts-and-Minds: A Strategy of Conciliation, Coercion, or Commitment?

DTIC Science & Technology

2012-09-01

benefits to modern conflicts remains problematic. According to Colonel (retired) Michael Crawshaw writing on evolution of British COIN for the United...Richmond, UK: Curzon Press, 2002), 11. 9. Michael Crawshaw , “The Evolution of British COIN,” Se- curity and Stabilisation: The Military Contribution...Afghanistan” (Cahier de la Recherche, France: November 2011), 42. 12. Ibid., 43. 13. Michael Crawshaw , “The Evolution of British COIN,” Se- curity and

Development and Implementation of an Interactive Uniform Regulations Manual for the United States Marine Corps

DTIC Science & Technology

2006-09-01

IMPLEMENTATION OF AN INTERACTIVE UNIFORM REGULATIONS MANUAL FOR THE UNITED STATES MARINE CORPS by Michael H. Villar Carsten Krause...SUBTITLE: Development and Implementation of an Interactive Uniform Regulations Manual for the United States Marine Corps 6. AUTHOR(S) Michael H. Villar...IMPLEMENTATION OF AN INTERACTIVE UNIFORM REGULATIONS MANUAL FOR THE UNITED STATES MARINE CORPS Michael H. Villar Major, United States Marine Corps B.A

Understanding a Complex World: Why an Emphasis on Empathy Could Better Enable Army Leaders to Win

DTIC Science & Technology

2016-06-10

complexity and speed of human interactions. Through the analysis of case studies involving General Stanley McChrystal and Colonel Michael Steele , this...Future; Win; Dilemma; Leadership; McChrystal, Stanley; Steele , Michael 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT 18. NUMBER OF...Stanley McChrystal and Colonel Michael Steele , this thesis describes how each individual’s empathetic mindset resulted in both favorable and

Combat Service Support MOD II Design (CSS MOD II). Volume 2. Appendixes

DTIC Science & Technology

1986-10-01

through contractual aoreement with Michael Jackson , Ltd. London. The spelling, syntax, and word usage adopted throughout the document have been made...to conform to army standards. The design teas members wish to thank the followin, individuals for their assistances Mr. John Cameron, Michael Jackson , Ltd...JSP) methodology is a product of Michael Jackson Systems, Ltd., London, England. In 1984, Dr. Wilbur Payne, Director, TRADOC Operations Research

Psychological Analyses of Courageous Performance in Military Personnel

DTIC Science & Technology

1990-08-01

British Columbia ARI Scientific Coordination Office, London Milton Katz, Chief Office of Basic Research Michael Kaplan , Director OTIC August1990 ELECTE...For NTIS Ri University of British Columbia DTic TAB Just fitIcat lo Technical review by Dy __Dttibut ton/ Michael Kaplan Avallability CodesDIst...22c. OFFICE SYMBOL Michael Kaplan (202) 274-8722 PERT-BR DD Form 1473, JUN 86 Previous editions are obsolete. SECURITY CLASSIFICATION OF THIS PAGE

Development and Implementation of Low-Cost Mobile Sensor Platforms Within a Wireless Sensor Network

DTIC Science & Technology

2010-09-01

WIRELESS SENSOR NETWORK by Michael Jay Tozzi September 2010 Thesis Advisor: Rachel Goshorn Second Reader: Duane Davis Approved for...Platforms Within a Wireless Sensor Network 6. AUTHOR(S) Tozzi, Michael Jay 5. FUNDING NUMBERS 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Naval...IMPLEMENTATION OF LOW-COST MOBILE SENSOR PLATFORMS WITHIN A WIRELESS SENSOR NETWORK Michael Jay Tozzi Lieutenant, United States Navy B.S., United

Hammer toe repair

MedlinePlus

... causing: Pain Irritation Sores Problems finding shoes that fit Skin infections Surgery may not be advised if: Treatment with paddings and strapping works You can still straighten your toe Changing to different shoe types can alleviate symptoms

Application of image processing technology to problems in manuscript encapsulation. [Codex Hammer

NASA Technical Reports Server (NTRS)

Glackin, D. L.; Korsmo, E. P.

1983-01-01

The long term effects of encapsulation individual sheets of the Codex Hammer were investigated. The manuscript was simulated with similar sheets of paper which were photographed under repeatable raking light conditions to enhance their surface texture, encapsulated in plexiglas, cycled in an environmental test chamber, and rephotographed at selected intervals. The film images were digitized, contrast enhanced, geometrically registered, and apodized. An FFT analysis of a control sheet and two experimental sheets indicates no micro-burnishing, but reveals that the ""mesoscale'' deformations with sizes 8mm are degrading monotonically, which is of no concern. Difference image analysis indicates that the sheets were increasingly stressed with time and that the plexiglas did not provide a sufficient environmental barrier under the simulation conditions. The relationship of these results to the Codex itself is to be determined.

Hypothenar Hammer Syndrome Caused by Recreational Sports Activities and Muscle Anomaly in the Wrist

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kreitner, Karl-Friedrich; Dueber, Christoph; Mueller, Lars-Peter

1996-09-15

A 34-year-old man with digital ischemia is reported. Angiography revealed thromboembolic occlusions of the proper digital arteries of the index, middle, and ring fingers and a tortuous ulnar artery in Guyon's canal. Though hypothenar hammer syndrome was suspected, there was no relevant occupational history. Magnetic resonance imaging and magnetic resonance angiography demonstrated an anomalous muscular sling around the ulnar artery immediately adjacent to the hook of the hamate. The ulnar artery showed mural thrombi in its tortuous segment. These findings were confirmed during operative exploration. After thrombectomy and embolectomy the involved segment of the ulnar artery was replaced by anmore » autologous vein graft. Postoperatively there was complete resolution of the symptoms. Only during convalescence did it become clear that the patient was a passionate golfer.« less

Comparison of the analytical and simulation results of the equilibrium beam profile

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Z. J.; Zhu Shaoping; Cao, L. H.

2007-10-15

The evolution of high current electron beams in dense plasmas has been investigated by using two-dimensional particle-in-cell (PIC) simulations with immobile ions. It is shown that electron beams are split into many filaments at the beginning due to the Weibel instability, and then different filamentation beams attract each other and coalesce. The profile of the filaments can be described by formulas. Hammer et al. [Phys. Fluids 13, 1831 (1970)] developed a self-consistent relativistic electron beam model that allows the propagation of relativistic electron fluxes in excess of the Alfven-Lawson critical-current limit for a fully neutralized beam. The equilibrium solution hasmore » been observed in the simulation results, but the electron distribution function assumed by Hammer et al. is different from the simulation results.« less

Weathering Grade Classification of Granite Stone Monument Using Reflectance Spectroscopy

NASA Astrophysics Data System (ADS)

Hyun, C.; Roh, T.; Choi, M.; Park, H.

2009-05-01

Stone monument has been placed in field and exposed to rain and wind. This outdoor environment and air pollution induced weathering of stone monument. Weathering grade classification is necessary to manage and conserve stone monuments. Visual interpretation by geologist and laboratory experiments using specimens fallen off from the monument to avoid damage on the monument have been applied to classify weathering grade conventionally. Rocks and minerals absorb some particular wavelength ranges of electromagnetic energy by electronic process and vibrational process of composing elements and these phenomena produce intrinsic diagnostic spectral reflectance curve. Non-destructive technique for weathering degree assessment measures those diagnostic absorption features of weathering products and converts the depths of features related to abundance of the materials to relative weathering degree. We selected granite outcrop to apply conventional six folded weathering grade classification method using Schmidt hammer rebound teste. The correlations between Schmidt hammer rebound values and absorption depths of iron oxides such as ferric oxide in the vicinity of 0.9 micrometer wavelength and clay minerals such as illite and kaolinite in the vicinity of 2.2 micrometer wavelength, representative weathering products of granite, were analyzed. The Schmidt hammer rebound value decreased according to increase of absorption depths induced from those weathering products. Weathering grade classification on the granite stone monument was conducted by using absorption depths of weathering products This research is supported from National Research Institute of Cultural Heritage and we appreciate for this.

Hypothenar hammer syndrome: a case and brief review.

PubMed

Swanson, Keith E; Bartholomew, John R; Paulson, Rolf

2012-04-01

Hypothenar hammer syndrome is an uncommon cause of upper-extremity ischemia that is often overlooked in the absence of a thorough occupational and recreational history. Importantly, it is a reversible cause of hand ischemia that, if missed, can lead to significant morbidity and even amputation. The occupational ramifications and quality of life of those affected can be significant. Its relative rarity, set against the ubiquitous use of the hand as a 'hammer' is noteworthy. Several other causes of hand ischemia can present similarly; therefore, consideration of other etiologies must be thoroughly investigated. Key distinguishing clinical features, in addition to a detailed occupational and recreational history, may include characteristic sparing of the thumb, the absence of a hyperemic phase in 'Raynaud's phenomenon', and a positive Allen's sign. Both non-invasive and invasive diagnostic studies, including bilateral upper-limb segmental pulse volume recordings (PVR), arterial duplex examination, and upper-extremity angiography, are complementary to a thorough history and physical examination. Optimal management strategies are not well defined because of its rarity and resultant lack of quality, evidence-based data. Though most cases can be successfully managed non-operatively, micrographic arterial reconstruction may be limb saving in severe or recalcitrant cases. Newer, experimental strategies including selective sympathetic blockage using botulinum toxin A have been reported in a few recalcitrant cases. The brief case description illustrates the typical presentation and potential treatment strategies employed in a difficult case. A review of relevant literature is also presented.

Testing as a Service with HammerCloud

NASA Astrophysics Data System (ADS)

Medrano Llamas, Ramón; Barrand, Quentin; Elmsheuser, Johannes; Legger, Federica; Sciacca, Gianfranco; Sciabà, Andrea; van der Ster, Daniel

2014-06-01

HammerCloud was designed and born under the needs of the grid community to test the resources and automate operations from a user perspective. The recent developments in the IT space propose a shift to the software defined data centres, in which every layer of the infrastructure can be offered as a service. Testing and monitoring is an integral part of the development, validation and operations of big systems, like the grid. This area is not escaping the paradigm shift and we are starting to perceive as natural the Testing as a Service (TaaS) offerings, which allow testing any infrastructure service, such as the Infrastructure as a Service (IaaS) platforms being deployed in many grid sites, both from the functional and stressing perspectives. This work will review the recent developments in HammerCloud and its evolution to a TaaS conception, in particular its deployment on the Agile Infrastructure platform at CERN and the testing of many IaaS providers across Europe in the context of experiment requirements. The first section will review the architectural changes that a service running in the cloud needs, such an orchestration service or new storage requirements in order to provide functional and stress testing. The second section will review the first tests of infrastructure providers on the perspective of the challenges discovered from the architectural point of view. Finally, the third section will evaluate future requirements of scalability and features to increase testing productivity.

Integrity of high-velocity water slug generated by an impacting technique

NASA Astrophysics Data System (ADS)

Dehkhoda, Sevda; Bourne, Neil

2013-06-01

A pulsed water jet is a series of discrete water slugs travelling at high velocity. Immediately after striking a target, these slugs apply high-intensity, short-duration transient stress known as the water hammer pressure, followed by low-intensity, long-duration stationary stress at the stagnation pressure. The magnitude and duration of the water hammer and stagnation pressures are controlled by the size and quality of the water slugs. The use of water jets for rock cutting in mining operations is a centuries-old technology; however, practical methods for producing high-energy water slugs repeatedly have proven difficult. This can be partly due to the fact that the geometrical properties of a jet and so its effectiveness in creating damage is controlled and influenced by the method that is employed to generate the water slugs. This paper investigates the integrity of a single water slug produced using an impacting technique where a hammer strikes a piston, resting on top of a water-filled chamber. The coherence of the generated water pulse was of concern in this study. If repeated shock reflections within the chamber were transmitted or were carried into the internal geometry of nozzle, the emerging jet could pulsate. The impact impulse of the formed water jet was measured in a Kel-F target material using an embedded PVDF (Polyvinylidene fluoride) shock gauge. The recorded stress waveform was then used to study the quality and endurance of the water pulse stream as it travelled through air.

Religion and organ donation: the views of UK faith leaders.

PubMed

Randhawa, Gurch; Brocklehurst, Anna; Pateman, Ruth; Kinsella, Suzannah; Parry, Vivienne

2012-09-01

This article reports the findings from the one-to-one interviews with the main UK faith and belief leaders which were commissioned by the Organ Donation Taskforce as part of its evidence gathering. Interviews were arranged with the main faith and belief organisations within the UK. Interviews covered a range of issues related to organ donation. Although some faith groups had some reservations regarding organ donation, interviews with these leaders demonstrated that none of these faith groups have reached a consensus against organ donation. The interviewees stated that the majority opinion in their faith or belief group is to permit organ donation, with some actively supporting it. Interviewees were keen to stress that there is a broad spectrum of opinion on organ transplantation within each faith and belief group and that consequently it is difficult to speak on behalf of an entire group. One complication mentioned by interviewees is that as organ transplantation is a relatively new medical procedure, there is no explicit reference to it in many original religious texts. Consequently, positions on the receipt and donation of organs are based on interpretation. It was felt that a much greater level of engagement is needed, as organ donation is currently not a priority for many faith and belief groups.

Reasons for self-medication and perceptions of risk among Mexican migrant farm workers.

PubMed

Horton, Sarah; Stewart, Analisia

2012-08-01

Although the frequency of self-medication among Mexican migrants has been well-documented in the public health literature, the multiple reasons for this practice are poorly understood. Most studies point to migrants' cultural preferences for Mexican medications, their prior experiences in countries where antibiotics are loosely regulated, and their lack of access to health care as the primary factors behind their self-medication. Based on participant observation and in-depth interviews with 23 Mexican migrants in a farm working community in the interior of California, we argue that occupational vulnerability is an equally important factor that encourages self-medication. All 23 of our interviewees reported having engaged in some degree of self-medication, notable in this location 8 h from the US-Mexico border. Among interviewees, occupational vulnerability represented an even more important factor influencing self-medication than lack of health insurance or lack of legal documentation. While interviewees did express a preference for Mexican medications as more potent and effective, this did not necessarily translate to a preference for using them without a doctor's supervision. Finally, we show that rather than remaining unaware of the risks of following this custom "transported from Latin America", Mexican migrants devised an elaborate hierarchy of resort of the safest self-medication practices to follow.

Using Electronic Health Records to Support Clinical Trials: A Report on Stakeholder Engagement for EHR4CR

PubMed Central

McCowan, Colin; Thomson, Elizabeth; Szmigielski, Cezary A.; Kalra, Dipak; Sullivan, Frank M.; Prokosch, Hans-Ulrich; Dugas, Martin; Ford, Ian

2015-01-01

Background. The conduct of clinical trials is increasingly challenging due to greater complexity and governance requirements as well as difficulties with recruitment and retention. Electronic Health Records for Clinical Research (EHR4CR) aims at improving the conduct of trials by using existing routinely collected data, but little is known about stakeholder views on data availability, information governance, and acceptable working practices. Methods. Senior figures in healthcare organisations across Europe were provided with a description of the project and structured interviews were subsequently conducted to elicit their views. Results. 37 structured interviewees in Germany, UK, Switzerland, and France indicated strong support for the proposed EHR4CR platform. All interviewees reported that using the platform for assessing feasibility would enhance the conduct of clinical trials and the majority also felt it would reduce workloads. Interviewees felt the platform could enhance trial recruitment and adverse event reporting but also felt it could raise either ethical or information governance concerns in their country. Conclusions. There was clear support for EHR4CR and a belief that it could reduce workloads and improve the conduct and quality of trials. However data security, privacy, and information governance issues would need to be carefully managed in the development of the platform. PMID:26539523

Knowledge, attitude and practice of mammography among women users of public health services.

PubMed

Marinho, Luiz Alberto Barcelos; Cecatti, José Guilherme; Osis, Maria José Duarte; Gurgel, Maria Salete Costa

2008-04-01

To evaluate knowledge, attitude and practice related to mammography among women users of local health services, identifying barriers to its performance. A total of 663 women were interviewed at 13 local health centers in a city of Southeastern Brazil, in 2001. Interviewees were randomly selected at each center and they were representative from different socioeconomic conditions. The number of interviewees at each center was proportional to monthly mean appointments. For data analysis, answers were described as knowledge, attitude, practice and their respective adequacies and then they were correlated with control variables through the chi-square test. Only 7.4% of the interviewees had adequate knowledge on mammography, while 97.1% of women had an adequate attitude. The same was seen for the practice of mammography that was adequate in 35.7% of the cases. The main barrier to mammography was lack of referral by physicians working at the health center (81.8%). There was an association between adequacy of attitude and five years or more of education and being married. There was also an association between adequacy of mammography practice and being employed and family income up to four minimum wages. Women users of local health services had no adequate knowledge and practice related to mammography despite having an adequate attitude about this exam.

Using Electronic Health Records to Support Clinical Trials: A Report on Stakeholder Engagement for EHR4CR.

PubMed

McCowan, Colin; Thomson, Elizabeth; Szmigielski, Cezary A; Kalra, Dipak; Sullivan, Frank M; Prokosch, Hans-Ulrich; Dugas, Martin; Ford, Ian

2015-01-01

The conduct of clinical trials is increasingly challenging due to greater complexity and governance requirements as well as difficulties with recruitment and retention. Electronic Health Records for Clinical Research (EHR4CR) aims at improving the conduct of trials by using existing routinely collected data, but little is known about stakeholder views on data availability, information governance, and acceptable working practices. Senior figures in healthcare organisations across Europe were provided with a description of the project and structured interviews were subsequently conducted to elicit their views. 37 structured interviewees in Germany, UK, Switzerland, and France indicated strong support for the proposed EHR4CR platform. All interviewees reported that using the platform for assessing feasibility would enhance the conduct of clinical trials and the majority also felt it would reduce workloads. Interviewees felt the platform could enhance trial recruitment and adverse event reporting but also felt it could raise either ethical or information governance concerns in their country. There was clear support for EHR4CR and a belief that it could reduce workloads and improve the conduct and quality of trials. However data security, privacy, and information governance issues would need to be carefully managed in the development of the platform.

Unconventional Counterinsurgency: Leveraging Traditional Social Networks and Irregular Forces in Remote and Ungoverned Areas

DTIC Science & Technology

2010-05-13

Identity: Why We Are Losing Our Wars”, Michael Vlahos argues that today’s wars with non-state enemies are “above all, wars of identity.”29 Moreover, he...together these manuals powerfully reinforce Michael Vlahos ’ imperative to reshape the population and enemy narrative by co-opting identity.34...29 Michael Vlahos , "Fighting Identity: Why We Are Losing Our Wars," Military Review (United States

Topological Privacy: Lattice Structures and Information Bubbles for Inference and Obfuscation

DTIC Science & Technology

2016-12-19

AFRL-AFOSR-VA-TR-2017-0036 Topological Privacy Michael Erdmann CARNEGIE MELLON UNIVERSITY 5000 FORBES AVENUE PITTSBURGH, PA 15213-3815 02/22/2017...PERSON 19b. TELEPHONE NUMBER (Include area code) 19-12-2016 Final 15-10-2013 - 14-10-2016 Topological Privacy Erdmann, Michael, A. Carnegie Mellon...Michael Erdmann Carnegie Mellon University me@cs.cmu.edu December 19, 2016 Abstract Information has intrinsic geometric and topological structure, arising

Description and Evaluation of GDEM-V 3.0

DTIC Science & Technology

2009-02-06

Description and Evaluation of GDEM -V 3.0 Michael R. caRnes Ocean Sciences Branch Oceanography Division February 6, 2009 i REPORT DOCUMENTATION PAGE Form...include area code) b. ABSTRACT c. THIS PAGE 18. NUMBER OF PAGES 17. LIMITATION OF ABSTRACT Description and Evaluation of GDEM -V 3.0 Michael R. Carnes...unlimited. Unclassified Unclassified Unclassified UL 24 Michael R. Carnes (228) 688-5648 The GDEM (Generalized Digital Environment Model) has served as

Novel Array-Based Target Identification for Synergistic Sensitization of Breast Cancer to Herceptin

DTIC Science & Technology

2010-05-01

Tatsuya Azum, Eileen Adamson, Ryan Alipio, Becky Pio, Frank Jones, Dan Mercola. Chip- on- chip analysis of mechanism of action of HER2 inhibition in...Munawar, Kutbuddin S. Doctor, Michael Birrer, Michael McClelland, Eileen Adamson, Dan Mercola. Egr1 regulates the coordinated expression of numerous...Kemal Korkmaz, Mashide Ohmichi, Eileen Adamson, Michael McClelland, Dan Mercola. Identification of genes bound and regulated by ATF2/c-Jun

Structuring Z Specifications with Views

DTIC Science & Technology

1994-03-01

Gregory Abowd, Michael Jackson , Jeannette Wing, Michal Young and Pamela Zave, who gave me helpful comments on drafts of this pa- per. I am also grateful to...1988. Uac94] Michael Jackson , "Software Development Method", in A Classical Mind: Essays in Honour of C.A.R Hoare, ed. A.W Roscoe, Prentice Hall...International, 1994. ,0 26 [Jon86] Cliff B. Jones, Systematic Software Development Using VDM, Prentice Hall International, 1986. [JZ93] Michael Jackson and

Test and Evaluation of the Navy Occupational Health Information Management System (NOHIMS).

DTIC Science & Technology

1986-07-01

Naval Shipyard for NOHIMS with the assistance of Todd Merrill from the University of Washington and Michael Jackson , another industrial hygienist...initialize NOHIMS and learn how to use the system. As the industrial component of NOHIMS became operational in Bremerton, Michael Jackson assumed the role...interacting with the system. Since NO|IIMS was introduced at Bremerton, Michael Jackson has been involved in all aspects of system start-up and maintenance

The role of primary health care services to better meet the needs of Aboriginal Australians transitioning from prison to the community.

PubMed

Lloyd, Jane E; Delaney-Thiele, Dea; Abbott, Penny; Baldry, Eileen; McEntyre, Elizabeth; Reath, Jennifer; Indig, Devon; Sherwood, Juanita; Harris, Mark F

2015-07-22

Aboriginal Australians are more likely than other Australians to cycle in and out of prison on remand or by serving multiple short sentences-a form of serial incarceration and institutionalisation. This cycle contributes to the over-representation of Aboriginal Australians in prison and higher rates of recidivism. Our research examined how primary health care can better meet the health care and social support needs of Aboriginal Australians transitioning from prison to the community. Purposive sampling was used to identify 30 interviewees. Twelve interviews were with Aboriginal people who had been in prison; ten were with family members and eight with community service providers who worked with former inmates. Thematic analysis was conducted on the interviewees' description of their experience of services provided to prisoners both during incarceration and on transition to the community. Interviewees believed that effective access to primary health care on release and during transition was positively influenced by providing appropriate healthcare to inmates in custody and by properly planning for their release. Further, interviewees felt that poor communication between health care providers in custody and in the community prior to an inmate's release, contributed to a lack of comprehensive management of chronic conditions. System level barriers to timely communication between in-custody and community providers included inmates being placed on remand which contributed to uncertainty regarding release dates and therefore difficulties planning for release, cycling in and out of prison on short sentences and being released to freedom without access to support services. For Aboriginal former inmates and family members, release from prison was a period of significant emotional stress and commonly involved managing complex needs. To support their transition into the community, Aboriginal former inmates would benefit from immediate access to culturally- responsive community -primary health care services. At present, however, pre-release planning is not always available, especially for Aboriginal inmates who are more likely to be on remand or in custody for less than six months.

Equity in interviews: do personal characteristics impact on admission interview scores?

PubMed

Lumb, Andrew B; Homer, Matthew; Miller, Amy

2010-11-01

Research indicates that some social groups are disadvantaged by medical school selection systems. The stage(s) of a selection process at which this occurs is unknown, but at interview, when applicant and interviewer are face-to-face, there is potential for social bias to occur. We performed a detailed audit of the interview process for a single-entry year to a large UK medical school. Our audit included investigating the personal characteristics of both interviewees and interviewers to find out whether any of these factors, including the degree of social matching between individual pairs of interviewees and interviewers, influenced the interview scores awarded. A total of 320 interviewers interviewed 734 applicants, providing complete data for 2007 interviewer-interviewee interactions. The reliability of the interview process was estimated using generalisability theory at 0.82-0.87. For both interviewers and interviewees, gender, ethnic background, socio-economic group and type of school attended had no influence on the interview scores awarded or achieved. Staff and student interviewer marks did not differ significantly. Although numbers in each group of staff interviewers were too small for formal statistical analysis, there were no obvious differences in marks awarded between different medical specialties or between interviewers with varying amounts of interviewing experience. Our data provide reassurance that the interview does not seem to be the stage of selection at which some social groups are disadvantaged. These results support the continued involvement of senior medical students in the interview process. Despite the lack of evidence that an interview is useful for predicting future academic or clinical success, most medical schools continue to use interviews as a fundamental component of their selection process. Our study has shown that at least this arguably misplaced reliance upon interviewing is not introducing further social bias into the selection system. © Blackwell Publishing Ltd 2010.

Life after a lung transplant: a balance of joy and challenges.

PubMed

Graarup, Jytte; Mogensen, Elin Lindberg; Missel, Malene; Berg, Selina Kikkenborg

2017-11-01

To describe patients' experiences throughout the first four months post-lung transplant. Health professionals are familiar with the fact that patients' average survival after a lung transplant is about seven years and that 74% of these patients reject new organs within the first two years. By contrast, knowledge of these patients' perspectives after lung transplantation is scant. A qualitative study was conducted between May 2013-May 2014 in which 26 interviewees participated - four months post-transplant - based on a semistructured interview guide. The data were inductively analysed using a content thematic approach within a phenomenological and hermeneutic frame. The main findings in the study reveal that (1) having a lung transplant is an overwhelming experience, which for some patients includes (2) troubling physical and psychological challenges. The interviewees were happy to get another chance to live, although some of them suffered from medical side effects, postoperative complications and psychological problems. When asked about the future, interviewees stated that life could be described as (3) a balance of joy and challenges. They had received a new chance in life and were eager to fulfil their life hopes and dreams. At the same time, they were worried about the future. Having a lung transplant implies rules that have to be followed. What are the healthy choices they are supposed to make? And will there be a tomorrow? Having a lung transplant is described as an overwhelming experience because of the improvement in the physical function of the body. Patients were grateful to family, friends and healthcare professionals for supporting them. The first four months post-transplantation were described as both physically and psychologically challenging. Interviewees were aware of the prognosis for patients following lung transplantation. They expressed feelings of worry and insecurity but still had hopes and dreams. The patients are troubled by both physical and psychological challenges after lung transplantation. Several areas call for interventions from healthcare professionals during the early post-transplant period. © 2017 John Wiley & Sons Ltd.

Detail of motor control cabinet and field breakers. Control cabinet ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Detail of motor control cabinet and field breakers. Control cabinet and breaker panel built by Cutler-Hammer - Wellton-Mohawk Irrigation System, Pumping Plant No. 3, South of Interstate 8, Wellton, Yuma County, AZ

24. INTERIOR VIEW, WILLIAM GRAY AT SIZING GUAGE ADJACENT TO ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

24. INTERIOR VIEW, WILLIAM GRAY AT SIZING GUAGE ADJACENT TO BRADLEY HAMMER; NOTE THIS IS THE SAME TOOL AS BEING FORGED ABOVE - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio County, WV

Searching for a Different Understanding of Operational Art

DTIC Science & Technology

2016-05-26

that “hampered by 35 Bruce Menning, “Operational Art’s Origins,” in Historical Perspectives of the Operational Art, ed. Michael D. Krause and R. Cody...war or theater of 43 Clayton Newell, “Introduction,” in On Operational Art, ed. Clayton Newell and Michael Krause (Washington, DC: US Army Center of...Menning, Bruce. “Operational Art’s Origins.” In Historical Perspectives of the Operational Art, edited by Michael D. Krause and R. Cody Phillips, 3

Preparing Brigade Combat Team Soldiers for Mission Readiness Through Research on Intangible Psychological Constructs and their Applications: Validation and Pilot

DTIC Science & Technology

2015-01-01

and their Applications: Validation and Pilot Steven N. Aude Kenneth Nicely Michael A. Lodato ICF International Christopher L. Vowels...CONTRACT OR GRANT NUMBER W5J9CQ-11-0009 5b. PROGRAM ELEMENT NUMBER 622785 6. AUTHOR(S) Steven N. Aude, Kenneth Nicely, Michael A... Michael A. Lodato ICF International Christopher L. Vowels U.S. Army Research Institute Fort Hood Research Unit Brian T. Crabb

Gas Control and Thermal Modeling Methods for Pressed Pellet and Fast Rise Thin-Film Thermal Batteries

DTIC Science & Technology

2015-09-01

Thin-Film Thermal Batteries by Frank C Krieger and Michael S Ding Approved for public release; distribution unlimited...Laboratory Gas Control and Thermal Modeling Methods for Pressed Pellet and Fast Rise Thin-Film Thermal Batteries by Frank C Krieger and Michael S...Batteries 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Frank C Krieger and Michael S Ding 5d. PROJECT NUMBER

Production of a Novel OX40 Ligand for Clinical Use

DTIC Science & Technology

2012-10-01

inhibitory to the detection of mycoplasma. 19.0 TECHNICAL REFERENCES 19.1 Barile , Michael F. and McGarrity, Gerard J. (1983). "Isolation of Mycoplasmas from...Edition, Section 2.6.7, Mycoplasmas. 19.4 McGarrity, Gerard J. and Barile , Michael F. (1983). "Use of Indicator Cell Lines for Recovery and...test material will be discarded following study completion unless otherwise requested by Sponsor. 20.0 REFERENCES 20.1 Barile , Michael F. and

Magnetic Insulation in Coaxial Transmission Lines with an External Magnetic Field

DTIC Science & Technology

1980-03-13

A. Mostrom, Michael E. Jones, and Lester E. Thode SUBMITTED TO: Physical Review Letters March 13, 1980 SöKOK_Kä^MJ!L;; ÄgEie?©d tea gas &c...Number Assigned by Contract Monitor: SLL 81- 262 Comments on Document: Archive, RRI, DEW . From Physical Review Letters Descriptors, Keywords: Magnetic...Source of Document: DEW MAGNETIC INSULATION IN COAXIAL TRANSMISSION LINES WITH AN EXTERNAL MAGNETIC FIELD Michael A. Mostrom, Michael E. Jones, and

The Russo-Japanese War, Lessons Not Learned

DTIC Science & Technology

2003-05-06

USACGSC, August, 2002), CR3.7-1--CR3.7-14; Michael Howard , “Men Against Fire, Expectations of War in 1914,” International Security (Summer 1984): 41-57...169; Carl von Clausewitz, On War, trans. and ed. Michael Howard and Peter Paret (Princeton: Princeton University Press, 1984), 37-38. 8Service in...Cleator, P. Weapons of War. New York: Thomas Y. Crowell Company, 1967. Clausewitz, Carl von. On War. Edited and translated by Michael Howard and

Evaluating perceptions of the effectiveness of the community advisory panel model for enhancing service delivery to marginalized populations.

PubMed

Ramsay, Jason T; Smith, Peter; Thompson, Alison; O'Campo, Patricia; Nisenbaum, Rosane; Watson, Priya; Park-Wylie, Laura; Bryant, Toba; Tandon, Reena; Farah, Mohammed

2012-01-01

The objective of this study was to evaluate perceptions of the effectiveness of the community advisory panels (CAPs) at St. Michael's Hospital, in Toronto, Canada. A qualitative design was employed. Participants included hospital staff, patients, Community Advisory Panel chairs, and key informants from community services in the St. Michael's Hospital catchment area. An online survey about awareness of the CAPs and CAP accomplishments; (2) Key informants interviews; and (3) Review of memos and meeting minutes of the CAPs to assess their impact in the hospital and the community. St. Michael's Hospital was the setting of the study. Descriptive statistics were generated for the survey data. Qualitative interview data were coded for major themes. Participants included hospital staff, patients, CAP chairs, and key informants from community services in the St. Michael's Hospital catchment area. Although the CAPs initiated and implemented an array of programs and services at St. Michael's Hospital, the visibility of the CAPs and their service to the hospital and community were very low. Themes that emerged from the semistructured interviews involved the visibility, effectiveness, and role of the CAPs in the hospital. Although the CAPs at St. Michael's Hospital appear to be an effective model for community responsiveness, the visibility of their work in the hospital and community was very low. © 2012 Wiley Periodicals, Inc.

Michael Griffin House Science Committee Hearing

NASA Image and Video Library

2005-06-27

NASA Administrator Michael Griffin prepares to testify at a hearing before the House Science Committee, Tuesday, June 28, 2005, Rayburn House Office building, Washington. Photo Credit: (NASA/Bill Ingalls)

Geophysicists

NASA Astrophysics Data System (ADS)

2004-06-01

In Memoriam: James R. Holton, Buford K. Meade, Mikhail I. Pudovkin; Honors: Michel Blanc, Alberto Borges, Paola Vannucchi, Michael A. Hapgood, Subir Banerjee, Lev Vinnik, John Wahr, Forrest Mozer, Vladimir N. Zharkov, Michael Ghil

Synthesis, chemical reactivity as Michael acceptors, and biological potency of monocyclic cyanoenones, novel and highly potent anti-inflammatory and cytoprotective agents.

PubMed

Zheng, Suqing; Santosh Laxmi, Y R; David, Emilie; Dinkova-Kostova, Albena T; Shiavoni, Katherine H; Ren, Yanqing; Zheng, Ying; Trevino, Isaac; Bumeister, Ronald; Ojima, Iwao; Wigley, W Christian; Bliska, James B; Mierke, Dale F; Honda, Tadashi

2012-05-24

Novel monocyclic cyanoenones examined to date display unique features regarding chemical reactivity as Michael acceptors and biological potency. Remarkably, in some biological assays, the simple structure is more potent than pentacyclic triterpenoids (e.g., CDDO and bardoxolone methyl) and tricycles (e.g., TBE-31). Among monocyclic cyanoenones, 1 is a highly reactive Michael acceptor with thiol nucleophiles. Furthermore, an important feature of 1 is that its Michael addition is reversible. For the inhibition of NO production, 1 shows the highest potency. Notably, its potency is about three times higher than CDDO, whose methyl ester (bardoxolone methyl) is presently in phase III clinical trials. For the induction of NQO1, 1 also demonstrated the highest potency. These results suggest that the reactivity of these Michael acceptors is closely related to their biological potency. Interestingly, in LPS-stimulated macrophages, 1 causes apoptosis and inhibits secretion of TNF-α and IL-1β with potencies that are higher than those of bardoxolone methyl and TBE-31.

Michael Griffin House Science Committee Hearing

NASA Image and Video Library

2005-06-27

Rep. Bart Gordon, D-TN., questions NASA Administrator Michael Griffin during a House Science Committee hearing, Tuesday, June 28, 2005, Rayburn House Office building, Washington. Photo Credit: (NASA/Bill Ingalls)

ASK Talks with Dr. Michael Hecht

NASA Technical Reports Server (NTRS)

Hecht, Michael

2003-01-01

Michael Hecht has been a member of NASA's Jet Propulsion Laboratory (JPL) staff since 1982. He is currently Project Manager and co-investigator for the Mars Environmental Compatibility Assessment (MECA)

Michael Thackeray on Lithium-air Batteries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thackeray, Michael

2009-01-01

Michael Thackeray, Distinguished Fellow at Argonne National Laboratory, speaks on the new technology Lithium-air batteries, which could potentially increase energy density by 5-10 times over lithium-ion batteries.

Michael Thackeray on Lithium-air Batteries

ScienceCinema

Thackeray, Michael

2018-02-06

Michael Thackeray, Distinguished Fellow at Argonne National Laboratory, speaks on the new technology Lithium-air batteries, which could potentially increase energy density by 5-10 times over lithium-ion batteries.

Dr Michaels® product family (also branded as Soratinex®) versus Methylprednisolone aceponate - a comparative study of the effectiveness for the treatment of plaque psoriasis.

PubMed

Hercogovấ, J; Fioranelli, M; Gianfaldoni, S; Chokoeva, A A; Tchernev, G; Wollina, U; Tirant, M; Novotny, F; Roccia, M G; Maximov, G K; França, K; Lotti, T

2016-01-01

As one of the most common dermatologic chronic-recurrent disease, variable therapeutic options are available today for management of psoriasis. Although topical high potency corticosteroids, alone or in association with salicylic acid or vitamin D analogues, are still considered the best treatment, they do not seem to possess the capability for a long-term control of the disease or prevent recurrences, as their side effects are major contraindications for continuative use. The aim of this study was to investigate whether Dr. Michaels® product family is comparable to methylprednisolone aceponate (MPA) as a viable alternative treatment option for the treatment and management of stable chronic plaque psoriasis. Thirty adults (13 male, 17 female, mean age 40 years) with mild to severe stable chronic plaque psoriasis, were included in the study. Patients were advised to treat the lesions of the two sides of their body (left and right) with two different unknown modalities for 8 weeks; the pack of Dr. Michaels® products on the left side (consisting of a cleansing gel, an ointment and a skin conditioner) and a placebo pack on the right side, consisting of a cleansing gel, methylprednisolone ointment and a placebo conditioner. Assessment was done using the Psoriasis Activity Severity Index (PASI) scores before treatment and after 2, 4, 6 and 8 weeks. The results achieved with the Dr. Michaels® (Soratinex®) product family for the treatment of chronic plaque psoriasis were better than the results achieved with methylprednisolone aceponate (MPA), even though quicker resolution was achieved with the steroid with 45% of patients achieving resolution within 8-10 days in comparison to 5-6 weeks in the Dr. Michaels® (Soratinex®) group. Before therapy, the mean PASI score of the LHS in Dr. Michaels® (Soratinex®) group was 13.8±4.1 SD and 14.2±4.2 SD in the RHS methylprednisolone aceponate (MPA) group. After 8 weeks of treatment 62% of the Dr. Michaels® (Soratinex®) group had achieved resolution whilst in the methylprednisolone aceponate (MPA) group, the figure remained at 45%. The mean PASI score after 8 weeks of treatment was calculated and in the LHS Dr. Michaels® (Soratinex®) group it was 2.8±1.6 SD and 6.8±2.4 SD in the RHS methylprednisolone aceponate group. In the RHS -methylprednisolone aceponate (MPA) group, 22% of patients failed to respond to the treatment in comparison to 6% in the LHS Dr. Michaels® (Soratinex®) group. Based on the results of this study, Dr. Michaels® products are a more effective treatment option, with insignificant side effects, compared to local treatment with methylprednisolone aceponate (MPA).

Evaluation of concrete pavement patching techniques.

DOT National Transportation Integrated Search

1989-01-01

This final report presents the results of a study undertaken to improve in concrete pavement patching techniques. Activities included an evaluation of the suitability of the impact hammer and maturity calculations for determining when a patch is read...

49 CFR 174.103 - Disposition of damaged or astray shipments.

Code of Federal Regulations, 2013 CFR

2013-10-01

... spark is produced by contact of metal or other hard surfaces which could ignite loose particles of... thoroughly swept, and washed with a plentiful supply of water. Iron-wheel trucks, metal hammers, or other...

49 CFR 174.103 - Disposition of damaged or astray shipments.

Code of Federal Regulations, 2014 CFR

2014-10-01

... spark is produced by contact of metal or other hard surfaces which could ignite loose particles of... thoroughly swept, and washed with a plentiful supply of water. Iron-wheel trucks, metal hammers, or other...

49 CFR 174.103 - Disposition of damaged or astray shipments.

Code of Federal Regulations, 2012 CFR

2012-10-01

... spark is produced by contact of metal or other hard surfaces which could ignite loose particles of... thoroughly swept, and washed with a plentiful supply of water. Iron-wheel trucks, metal hammers, or other...

49 CFR 174.103 - Disposition of damaged or astray shipments.

Code of Federal Regulations, 2010 CFR

2010-10-01

... spark is produced by contact of metal or other hard surfaces which could ignite loose particles of... thoroughly swept, and washed with a plentiful supply of water. Iron-wheel trucks, metal hammers, or other...

49 CFR 174.103 - Disposition of damaged or astray shipments.

Code of Federal Regulations, 2011 CFR

2011-10-01

... spark is produced by contact of metal or other hard surfaces which could ignite loose particles of... thoroughly swept, and washed with a plentiful supply of water. Iron-wheel trucks, metal hammers, or other...

Single Piezo-Actuator Rotary-Hammering (SPaRH) Drill

NASA Technical Reports Server (NTRS)

Sherrit, Stewart (Inventor); Bao, Xiaoqi (Inventor); Badescu, Mircea (Inventor); Bar-Cohen, Yoseph (Inventor)

2014-01-01

A Single Piezo-Actuator Rotary-Hammering (SPaRH) Drill includes a horn actuator having high power piezoelectric materials and a flexure pre-stress to increase the actuators effectiveness. The drill is a low mass, low power, compact coring drill measuring 20-cm high by 7-cm diameter and having a total weight of 2 kg including drive electronics. Using an average power of 50-Watts, the drill basalt is expected to cut basalt at a rate of 0.2 cm/min down to depth of 10-cm and create cuttings and an intact core. The drill is expected to operate under different environments including Martian ambient (6 Torr and down to -50 degree C), and liquid nitrogen temperatures (77 K) and low pressure (<<1 Torr) to simulate lunar polar and Europa conditions. Materials expected to be sampled include Kaolinite, Saddleback Basalt, Limestone, Volcanic Breccia, Siltstone, ice, permafrost and layered rocks with different hardness.

Synchrony and motor mimicking in chimpanzee observational learning

PubMed Central

Fuhrmann, Delia; Ravignani, Andrea; Marshall-Pescini, Sarah; Whiten, Andrew

2014-01-01

Cumulative tool-based culture underwrote our species' evolutionary success, and tool-based nut-cracking is one of the strongest candidates for cultural transmission in our closest relatives, chimpanzees. However the social learning processes that may explain both the similarities and differences between the species remain unclear. A previous study of nut-cracking by initially naïve chimpanzees suggested that a learning chimpanzee holding no hammer nevertheless replicated hammering actions it witnessed. This observation has potentially important implications for the nature of the social learning processes and underlying motor coding involved. In the present study, model and observer actions were quantified frame-by-frame and analysed with stringent statistical methods, demonstrating synchrony between the observer's and model's movements, cross-correlation of these movements above chance level and a unidirectional transmission process from model to observer. These results provide the first quantitative evidence for motor mimicking underlain by motor coding in apes, with implications for mirror neuron function. PMID:24923651

Underwater noise from geotechnical drilling and standard penetration testing.

PubMed

Erbe, Christine; McPherson, Craig

2017-09-01

Geotechnical site investigations prior to marine construction typically involve shallow, small-core drilling and standard penetration testing (SPT), during which a small tube is hammered into the ground at the bottom of the borehole. Drilling (120 kW, 83 mm diameter drillbit, 1500 rpm, 16-17 m drill depth in sand and mudstone) and SPT (50 mm diameter test tube, 15 mm wall thickness, 100 kg hammer, 1 m drop height) by a jack-up rig in 7-13 m of water were recorded with a drifting hydrophone at 10-50 m range. Source levels were 142-145 dB re 1 μPa rms @ 1 m (30-2000 Hz) for drilling and 151-160 dB re 1 μPa 2 s @ 1 m (20-24 000 Hz) for SPT.

Determine the Compressive Strength of Calcium Silicate Bricks by Combined Nondestructive Method

PubMed Central

2014-01-01

The paper deals with the application of combined nondestructive method for assessment of compressive strength of calcium silicate bricks. In this case, it is a combination of the rebound hammer method and ultrasonic pulse method. Calibration relationships for determining compressive strength of calcium silicate bricks obtained from nondestructive parameter testing for the combined method as well as for the L-type Schmidt rebound hammer and ultrasonic pulse method are quoted here. Calibration relationships are known for their close correlation and are applicable in practice. The highest correlation between parameters from nondestructive measurement and predicted compressive strength is obtained using the SonReb combined nondestructive method. Combined nondestructive SonReb method was proved applicable for determination of compressive strength of calcium silicate bricks at checking tests in a production plant and for evaluation of bricks built in existing masonry structures. PMID:25276864

Synchrony and motor mimicking in chimpanzee observational learning.

PubMed

Fuhrmann, Delia; Ravignani, Andrea; Marshall-Pescini, Sarah; Whiten, Andrew

2014-06-13

Cumulative tool-based culture underwrote our species' evolutionary success, and tool-based nut-cracking is one of the strongest candidates for cultural transmission in our closest relatives, chimpanzees. However the social learning processes that may explain both the similarities and differences between the species remain unclear. A previous study of nut-cracking by initially naïve chimpanzees suggested that a learning chimpanzee holding no hammer nevertheless replicated hammering actions it witnessed. This observation has potentially important implications for the nature of the social learning processes and underlying motor coding involved. In the present study, model and observer actions were quantified frame-by-frame and analysed with stringent statistical methods, demonstrating synchrony between the observer's and model's movements, cross-correlation of these movements above chance level and a unidirectional transmission process from model to observer. These results provide the first quantitative evidence for motor mimicking underlain by motor coding in apes, with implications for mirror neuron function.

Insulation bonding test system

NASA Technical Reports Server (NTRS)

Beggs, J. M.; Johnston, G. D.; Coleman, A. D.; Portwood, J. N.; Saunders, J. M.; Redmon, J. W.; Porter, A. C. (Inventor)

1984-01-01

A method and a system for testing the bonding of foam insulation attached to metal is described. The system involves the use of an impacter which has a calibrated load cell mounted on a plunger and a hammer head mounted on the end of the plunger. When the impacter strikes the insulation at a point to be tested, the load cell measures the force of the impact and the precise time interval during which the hammer head is in contact with the insulation. This information is transmitted as an electrical signal to a load cell amplifier where the signal is conditioned and then transmitted to a fast Fourier transform (FFT) analyzer. The FFT analyzer produces energy spectral density curves which are displayed on a video screen. The termination frequency of the energy spectral density curve may be compared with a predetermined empirical scale to determine whether a igh quality bond, good bond, or debond is present at the point of impact.

Computation of water hammer protection of modernized pumping station

NASA Astrophysics Data System (ADS)

Himr, Daniel

2014-03-01

Pumping station supplies water for irrigation. Maximal capacity 2 × 1.2m3·s-1 became insufficient, thus it was upgraded to 2 × 2m3·s-1. Paper is focused on design of protection against water hammer in case of sudden pumps trip. Numerical simulation of the most dangerous case (when pumps are giving the maximal flow rate) showed that existing air vessels were not able to protect the system and it would be necessary to add new vessels. Special care was paid to influence of their connection to the main pipeline, because the resistance of the connection has a significant impact on the scale of pressure pulsations. Finally, the pump trip was performed to verify if the system worked correctly. The test showed that pressure pulsations are lower (better) than computation predicted. This discrepancy was further analysed.

Grafting-Density Effects, Optoelectrical Properties and Nano-Patterning of Poly(para-Phenylene) Brushes

DTIC Science & Technology

2013-01-01

NAME OF RESPONSIBLE PERSON 19b. TELEPHONE NUMBER S. Michael Kilbey Dawen Li, Jimmy W. Mays , S. Michael Kilbey II, Jihua Chen, Jose Alonzo, Xiang Yu...Dawen Li,d Jimmy W. Mays ,be Bobby G. Sumpteraf and S. Michael Kilbey II*eg Well-defined conjugated polymers in confined geometries are chal- lenging to...relationships of conned thin lms and may serve as a basis to understand polymer micelles, polymer-stabilized colloid particles, or interfaces compatibi

A Parametric Regression of the Cost of Base Realignment Action (COBRA) Model

DTIC Science & Technology

1993-09-20

Douglas D. Hardman , Captain, USAF Michael S. Nelson, Captain, USAF AFIT/GEE/ENS/93S-03 93 P’ 8 143 Approved for public release, distribution unlimited 93... Hardman CLASS: GEE 93S Captain Michael Nelson TITLE: A Parametric Regression of the Cost of Base Realignment Action (COBRA) Model DEFENSE DATE: 20...Science in Engineering and Environmental Management Douglas D. Hardman , B.S.E.E. Michael S. Nelson, B.S.C.E Captain, USAF Captain, USAF September 1993

Deception in Covert Nuclear Weapons Development: A Framework to Identify, Analyze, and Mitigate Future Long-Term Deception Efforts

DTIC Science & Technology

2016-03-01

In March, shortly after the BJP’s electoral victory, senior foreign policy advisor N . N . Jha informed U.S. embassy officials in New Delhi that the...College, 1998. Barker, Brian, Michael Clark, Peter Davis, Mark Fisk, Michael Hedlin, Hans Israelsson, Vitaly Khalturin, et al. "Monitoring Nuclear...Pretoria, South Africa, 1981. Mihalka, Michael, German Strategic Deception in the 1930’s, Santa Monica, Calif.: RAND Corporation, N -1557-NA, 1980

Michael Polanyi: Science as Personal Knowledge and Social Practice.

PubMed

Nye, Mary Jo

2017-03-20

Tacit knowing: 2016 marked the 125th anniversary of the birth of the physical chemist Michael Polanyi, as well as the 40th of his death. This essay discusses his philosophy of science-in particular, his most significant work in this area, Personal Knowledge-from the perspective of his personal biography, as well as its lasting influence on the social sciences. In the photograph: Michael Polanyi at the Fritz Haber Institute in 1968. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Proceedings, Conference and Training Workshop on Wildlife Hazards to Aircraft Held at Charleston, South Carolina on 22-25 May 1984

DTIC Science & Technology

1984-05-25

Aircraft ~.Aut@i~Michael J . Harrison/Sidney A. Gauthreaux, Jr., -Lilia A. Abron-Robinson .WeUi’N.(TiS 9. Pordoni,mg Ogon.m,t,. Nome and AdOda.0...Michael J . Harrison (AAS-330) 16. A4049ract , /-7hese proceedings were developed to enhance information exchange and improve understanding and control of...Wildlife Hazards to Aircraft S Conference and Training Workshop Edited by: Michael J . Harrison Federal Aviation Administration . Dr. Sidney A

Maniac Talk - Michael Kurylo

NASA Image and Video Library

2016-11-16

Michael Kurylo Maniac Lecture, November 16, 2016 NASA climate scientist Michael Kurylo presented a Maniac lecture entitled, "An Uncharted Journey: How I Became an Atmospheric Scientist Rather than a Cowboy or a Farmer." Mike described the path that took him from post-WW II housing projects to and through a rural Connecticut neighborhood, how he became convinced about the unrealistic nature of some early naive career dreams, and how he eventually arrived at a career in atmospheric science (research and program management, and their interface with international environmental policy).

"Anti-Michael addition" of Grignard reagents to sulfonylacetylenes: synthesis of alkynes.

PubMed

Esteban, Francisco; Boughani, Lazhar; García Ruano, José L; Fraile, Alberto; Alemán, José

2017-05-10

In this work, the addition of Grignard reagents to arylsulfonylacetylenes, which undergoes an "anti-Michael addition", resulting in their alkynylation under very mild conditions is described. The simplicity of the experimental procedure and the functional group tolerance are the main features of this methodology. This is an important advantage over the use of organolithium at -78 °C that we previously reported. Moreover, the synthesis of diynes and other examples showing functional group tolerance in this anti-Michael reaction is also presented.

78 FR 4406 - Notice of Commission Staff Attendance

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-22

... Carolina Electric & Gas Company For more information, contact Michael Lee, Office of Energy Market Regulation, Federal Energy Regulatory Commission at (202) 502-8658 or Michael.Lee@ferc.gov . Dated: January...

Goddard Queen Visit

NASA Image and Video Library

2007-05-07

Prince Philip greets astronauts from STS-125 L to R Andrew J Feustel, Michael T Goode, K. Megan McArthur, Michael J. Massimino, Gregory C. Johnson, and Commander Scott D. Altman. Photo Credit: (NASA/Chris Gunn)

78 FR 36183 - Notice of Commission Staff Attendance

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-17

... Electric & Gas Company For More Information Contact: Michael Lee, Office of Energy Market Regulation, Federal Energy Regulatory Commission at (202) 502-8658 or Michael.Lee@ferc.gov . Dated: June 11, 2013...

Experience in Grid Site Testing for ATLAS, CMS and LHCb with HammerCloud

NASA Astrophysics Data System (ADS)

Elmsheuser, Johannes; Medrano Llamas, Ramón; Legger, Federica; Sciabà, Andrea; Sciacca, Gianfranco; Úbeda García, Mario; van der Ster, Daniel

2012-12-01

Frequent validation and stress testing of the network, storage and CPU resources of a grid site is essential to achieve high performance and reliability. HammerCloud was previously introduced with the goals of enabling VO- and site-administrators to run such tests in an automated or on-demand manner. The ATLAS, CMS and LHCb experiments have all developed VO plugins for the service and have successfully integrated it into their grid operations infrastructures. This work will present the experience in running HammerCloud at full scale for more than 3 years and present solutions to the scalability issues faced by the service. First, we will show the particular challenges faced when integrating with CMS and LHCb offline computing, including customized dashboards to show site validation reports for the VOs and a new API to tightly integrate with the LHCbDIRAC Resource Status System. Next, a study of the automatic site exclusion component used by ATLAS will be presented along with results for tuning the exclusion policies. A study of the historical test results for ATLAS, CMS and LHCb will be presented, including comparisons between the experiments’ grid availabilities and a search for site-based or temporal failure correlations. Finally, we will look to future plans that will allow users to gain new insights into the test results; these include developments to allow increased testing concurrency, increased scale in the number of metrics recorded per test job (up to hundreds), and increased scale in the historical job information (up to many millions of jobs per VO).

Water hammer caused by closure of turbine safety spherical valves

NASA Astrophysics Data System (ADS)

Karadžić, U.; Bergant, A.; Vukoslavčević, P.

2010-08-01

This paper investigates water hammer effects caused by closure of spherical valves against the discharge. During the first phase of modernisation of Perućica high-head hydropower plant (HPP), Montenegro, safety spherical valves (inlet turbine valves) have been refurbished on the first two Pelton turbine units. The valve closure is controlled by the valve actuator (hydraulic servomotor). Because the torque acting on the valve body is dependent on flow conditions the valve closing time may vary significantly for different flow velocities (passive valve). For the passive valve the torques acting on the valve body should be considered in the valve model. The valve closing time results from numerical simulation. On the contrary, for the active valve the valve closing time is assumed prior to simulation. The spherical valve boundary condition is incorporated into the method of characteristics (MOC) algorithm. The staggered (diamond) grid in applying the MOC is used in this paper. The passive valve boundary condition is described by the water hammer equations, the valve equation that relates discharge to pressure head drop and the dynamic equation of the valve body motion (torque equation). The active valve boundary condition is described by the first two equations, respectively. Standard quasi-steady friction model is used for estimating friction losses in plant's tunnel and penstocks. Numerical results using both the active and the passive spherical valve models are compared with results of measurements. It has been found that the influence of flow conditions on the spherical valve closing time is minor for the cases considered. Computed and measured results agree reasonably well.

Investigation of transient cavitating flow in viscoelastic pipes

NASA Astrophysics Data System (ADS)

Keramat, A.; Tijsseling, A. S.; Ahmadi, A.

2010-08-01

A study on water hammer in viscoelastic pipes when the fluid pressure drops to liquid vapour pressure is performed. Two important concepts including column separation and the effects of retarded strains in the pipe wall on the fluid response have been investigated separately in recent works, but there is some curiosity as to how the results for pressure and discharge are when column separation occurs in a viscoelastic pipe. For pipes made of plastic such as polyethylene (PE) and polyvinyl chloride (PVC), viscoelasticity is a crucial mechanical property which changes the hydraulic and structural transient responses. Based on previous developments in the analysis of water hammer, a model which is capable of analysing column separation in viscoelastic pipes is presented and used for solving the selected case studies. For the column-separation modelling the Discrete Vapour Cavity Model (DVCM) is utilised and the viscoelasticity property of the pipe wall is modelled by Kelvin-Voigt elements. The effects of viscoelasticity play an important role in the column separation phenomenon because it changes the water hammer fundamental frequency and so affects the time of opening or collapse of the cavities. Verification of the implemented computer code is performed for the effects of viscoelasticity and column separation - separately and simultaneously - using experimental results from the literature. In the provided examples the focus is placed on the simultaneous effect of viscoelasticity and column separation on the hydraulic transient response. The final conclusions drawn are that if rectangular grids are utilised the DVCM gives acceptable predictions of the phenomenon and that the pipe wall material's retarded behaviour strongly dampens the pressure spikes caused by column separation.

Information Technology Governance Domains in Hospitals: A Case Study in Iran

PubMed Central

Shahi, Mehraban; Sadoughi, Farahnaz; Ahmadi, Maryam

2015-01-01

IT governance is a set of organizational structures ensuring decision-making rights and responsibilities with regard to the organization’s IT assets. This qualitative study was carried out to identify the IT governance domains in teaching hospitals affiliated to Iran University of Medical Sciences. There were 10 heads of IT departments and 10 hospital directors. Semi structured interviews used for data collection. To analyze the data content analysis was applied. All the interviewees (100%) believed that decisions upon hospital software needs could be made in a decentralized fashion by the IT department of the university. Most of the interviewees (90%) believed that there were policies for logistics and maintenance of networks, purchase and maintenance, standards and general policies in the direction of the policies of the ministry of health and medical education. About 80% of the interviewees believed that the current emphasis of the hospital’s IT unit and the hospital management for outsourcing of services were in the format of specialized contracts and under supervision of the university Statistic and IT department. A hospital strategic committee is an official organizational group consisting of hospital executives, heads of IT and multiple functional areas and business units in a hospital. In this committee, “the head of hospital” acts as the director of IT activities and ensures that IT strategies are alignment with the hospital business strategies. PMID:25948446

Near-death states reported in a sample of 50 misusers.

PubMed

Corazza, Ornella; Schifano, Fabrizio

2010-05-01

Increase in recreational ketamine use may be a cause for concern. We aimed here at assessing, in a sample of ketamine misusers, concordance between the typical near-death experience (NDE) features and the on-drug psychoactive effects the subjects experienced. In 2003-2005, a sample of previous ketamine misusers recollecting a ketamine-related NDE were recruited through snowballing and screened with the means of the Greyson NDE Scale; 125 participants made an initial contact with the researcher and 50 reported a minimum score of seven at the "Greyson NDE Scale". Interviewees were in the range 21-66 years old; 27 participants (54%) were educated at BA level, 18 (36%) had an MSc, and 5 (10%) a PhD. Eight (16%) interviewees had a definite religious background. An average lifetime ketamine intake of 140 occasions was reported by the interviewees, who typically presented with a polydrug, including cannabis and MDMA/ecstasy, misuse history. In 45 (90%) cases, the NDE occurred during the first few occasions of intake. Most frequent features of reported NDE states included: altered perception of time (90%), strong sense of detaching from own physical body (88%), and a sense of peace/joy (76% of subjects). Although results here described were elicited from a self-selected, nonrandomized, limited size sample of misusers, we suggest that recreational ketamine intake may be associated with occurrence of near-death related states.

Information technology governance domains in hospitals: a case study in Iran.

PubMed

Shahi, Mehraban; Sadoughi, Farahnaz; Ahmadi, Maryam

2014-11-30

IT governance is a set of organizational structures ensuring decision-making rights and responsibilities with regard to the organization's IT assets. This qualitative study was carried out to identify the IT governance domains in teaching hospitals affiliated to Iran University of Medical Sciences. There were 10 heads of IT departments and 10 hospital directors. Semi structured interviews used for data collection. To analyze the data content analysis was applied. All the interviewees (100%) believed that decisions upon hospital software needs could be made in a decentralized fashion by the IT department of the university. Most of the interviewees (90%) believed that there were policies for logistics and maintenance of networks, purchase and maintenance, standards and general policies in the direction of the policies of the ministry of health and medical education. About 80% of the interviewees believed that the current emphasis of the hospital's IT unit and the hospital management for outsourcing of services were in the format of specialized contracts and under supervision of the university Statistic and IT department. A hospital strategic committee is an official organizational group consisting of hospital executives, heads of IT and multiple functional areas and business units in a hospital. In this committee, "the head of hospital" acts as the director of IT activities and ensures that IT strategies are alignment with the hospital business strategies.

Michael Griffin House Science Committee Hearing

NASA Image and Video Library

2005-06-27

Members of the media photograph NASA Administrator Michael Griffin as he testifies at a hearing before the House Science Committee, Tuesday, June 28, 2005, Rayburn House Office building, Washington. Photo Credit: (NASA/Bill Ingalls)

Michael Lawson | NREL

Science.gov Websites

NREL's Ocean Energy team, Dr. Michael Lawson focuses on the areas of wave and water current energy goal of developing an open source design and analysis tool for wave energy conversion (WEC) devices

Transportation

DTIC Science & Technology

2006-01-01

Ports. Logistics Today, Vol.46. Issue 9. 43. Maloni, Michael ., Jackson , Eric. (2005, Spring). North American Container Port Capacity: A...Literature Review. Transportation Journal, Spring 2005. 16-36. Maloni, Michael ., Jackson , Eric. (2005, Summer). North American Container Port Capacity: An

Design phase identification of high pile rebound soils : final report

DOT National Transportation Integrated Search

2010-12-15

An engineering problem has occurred when installing displacement piles in certain soils. During driving, piles are rebounding excessively during each hammer blow, causing delay and as a result may not achieve the required design capacities. Piles dri...

Rotary Percussive Auto-Gopher for Deep Drilling and Sampling

NASA Technical Reports Server (NTRS)

Bar-Cohen, Yoseph; Badescu, Mircea; Sherrit, Stewart

2009-01-01

The term "rotary percussive auto-gopher" denotes a proposed addition to a family of apparatuses, based on ultrasonic/ sonic drill corers (USDCs), that have been described in numerous previous NASA Tech Briefs articles. These apparatuses have been designed, variously, for boring into, and/or acquiring samples of, rock or other hard, brittle materials of geological interest. In the case of the rotary percussive autogopher, the emphasis would be on developing an apparatus capable of penetrating to, and acquiring samples at, depths that could otherwise be reached only by use of much longer, heavier, conventional drilling-and-sampling apparatuses. To recapitulate from the prior articles about USDCs: A USDC can be characterized as a lightweight, low-power jackhammer in which a piezoelectrically driven actuator generates ultrasonic vibrations and is coupled to a tool bit through a free mass. The bouncing of the free mass between the actuator horn and the drill bit converts the actuator ultrasonic vibrations into sonic hammering of the drill bit. The combination of ultrasonic and sonic vibrations gives rise to a hammering action (and a resulting chiseling action at the tip of the tool bit) that is more effective for drilling than is the microhammering action of ultrasonic vibrations alone. The hammering and chiseling actions are so effective that the size of the axial force needed to make the tool bit advance into soil, rock, or another material of interest is much smaller than in ordinary rotary drilling, ordinary hammering, or ordinary steady pushing. The predecessor of the rotary percussive auto-gopher is an apparatus, now denoted an ultrasonic/sonic gopher and previously denoted an ultrasonic gopher, described in "Ultrasonic/ Sonic Mechanism for Drilling and Coring" (NPO-30291), NASA Tech Briefs Vol. 27, No. 9 (September 2003), page 65. The ultrasonic/sonic gopher is intended for use mainly in acquiring cores. The name of the apparatus reflects the fact that, like a gopher, it periodically stops advancing at the end of the hole to bring excavated material (in this case, a core sample) to the surface, then re-enters the hole to resume the advance of the end of the hole. By use of a cable suspended from a reel on the surface, the gopher is lifted from the hole to remove a core sample, then lowered into the hole to resume the advance and acquire the next core sample.

Employment programs and professionals with a disability.

PubMed

Donelly, Michelle; Given, Fiona

2010-01-01

It is unclear whether or not open (competitive) employment programs are meeting the needs of the growing numbers of people with a disability seeking professional employment. To understand and describe the experience of a newly graduated professional (Michael) who was seeking open employment support and to analyze those experiences in relation to principles of effective open employment support. Michael a recently graduated accountant who also has a physical disability. A review of the literature was undertaken to identify recommended principles and practices for the conduct of effective open employment and career development programs. A case study was used to describe Michael's experiences as he sought professional employment. Michael's experiences were analysed in relation to recommended principles and practice. The analysis confirmed that the concerns Michael experienced about the supported employment program compromised the effectiveness of the support he received. Employment services based on models of independent living, disability service standards and remediation are likely to focus on the 'pathology' or performance 'deficits' of the person with a disability. Successful open employment models are more likely to place pre-eminence on the perspective of the person with a disability and effective practices for securing employment.

Meet EPA Scientist Michael Nye, Ph.D.

EPA Pesticide Factsheets

Michael Nye, Ph.D., is a social scientist who studies natural risk, socio-demographic change and sustainable behavior. Prior to joining EPA, he worked for the UK Environment Agency in flood risk management and emergency preparedness

Thin Film Thermoelectric Metal-Organic Framework with High Seebeck Coefficient and Low Thermal Conductivity. Supporting Information

DTIC Science & Technology

2015-04-28

François Léonard, Vitalie Stavila, Michael E. Foster, Catalin D. Spataru, Reese E. Jones, Brian M. Foley, Patrick E. Hopkins, Mark D. Allendorf, A. Alec...Léonard, Vitalie Stavila, Michael E. Foster, Catalin D. Spataru, Reese E. Jones, Brian M. Foley, Patrick E. Hopkins, Mark D. Allendorf, and A. Alec Talin...Kristopher J. Erickson, François Léonard, Vitalie Stavila, Michael E. Foster, Catalin D. Spataru, Reese E. Jones, Brian M. Foley, Patrick E. Hopkins, Mark D

Biennial Guidance Test Symposium (16th) Held in Holloman Air Force Base, New Mexico on October 5-7, 1993. Volume 1

DTIC Science & Technology

1993-10-01

Michael Swamp, Contraves Inc., Pittsburgh PA; Dr. Michael D. Hooser, CIGTF, Holloman AFB NM Hig h Stability Large Centrifuge Test Bed 305 Dr. Louis A...DeMore, Robert Anticole, and Hans Riggenbach, Contraves Inc, Pittsburgh PA; Dr. Michael D. Hooser, CIGTF, Holloman AFB NM vi SESSION V-A: WEAPONS...power spectral density of input are also frozen out, allowing very low loss referred noise) of 10’ HzŖ below 100 Hz. springs. The input coils are

Hammer toe repair - discharge

MedlinePlus

... first to achieve this important distinction for online health information and services. Learn more about A.D.A. ... Ethics and subscribes to the principles of the Health on the Net Foundation (www.hon.ch). The information provided herein should not be used during any ...

Improving design phase evaluations for high pile rebound sites [summary].

DOT National Transportation Integrated Search

2016-05-01

In Florida, many structures are built on driven piles. Though it seems straightforward, pile : driving involves complex interactions between the pile, the hammer, the soil, and driving : procedures. Soils can even rebound, or push back, after each ha...

Toys for Preschool Children

ERIC Educational Resources Information Center

Stephenson, Audrey

1977-01-01

In emphasizing the importance of play and toys in a child's development, this article describes the kinds of toys suitable for preschool children of all ages. Floor toys, building and hammering toys, transport, and imaginative and creative play are some of the topics covered. (JK)

Demonstrating Sound Impulses in Pipes.

ERIC Educational Resources Information Center

Raymer, M. G.; Micklavzina, Stan

1995-01-01

Describes a simple, direct method to demonstrate the effects of the boundary conditions on sound impulse reflections in pipes. A graphical display of the results can be made using a pipe, cork, small hammer, microphone, and fast recording electronics. Explains the principles involved. (LZ)

Detail view of the concrete arched balustrade railing and bushhammered ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Detail view of the concrete arched balustrade railing and bush-hammered inset posts - North Fork Butter Creek Bridge, Spanning North Fork Butter Creek Bridge at Milepost 76.63 on Heppner Highway (Oregon Route 74), Pilot Rock, Umatilla County, OR

Genetics Home Reference: Parkes Weber syndrome

MedlinePlus

... JB, Enjolras O, Cordisco MR, Burrows PE, Clapuyt P, Hammer F, Dubois J, Baselga E, Brancati F, Carder R, Quintal JM, Dallapiccola B, Fischer G, Frieden IJ, Garzon M, Harper J, Johnson-Patel J, Labrèze C, Martorell L, Paltiel HJ, Pohl ...

Presidential Search: Selecting the Top Candidates.

ERIC Educational Resources Information Center

Stead, Ronald S.

1988-01-01

The winnowing of a large number of presidential candidates to a smaller, more manageable group is discussed. Initial screening, candidate information, evaluation form, reference checking, and selecting interviewees are described. (MLW)

Book review: Black bass diversity: Multidisciplinary science for conservation

USGS Publications Warehouse

Jelks, Howard L.

2016-01-01

Review info: Black bass diversity: Multidisciplinary science for conservation. Edited by Michael D. Tringali, James M. Long, Timothy W. Birdsong, and Michael S. Allen, 2015. ISBN: 978-1-934874-40-0, 685 pp.

MIDWEST STRUCTURAL SCIENCES CENTER 2011 ANNUAL REPORT

DTIC Science & Technology

2011-10-01

S. MICHAEL SPOTTSWOOD MICHAEL J. SHEPARD , Chief Senior Aerospace Engineer Analytical Mechanics Branch Analytical...49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Confe- rence, Chicago , IL, Apr. 7-10, 2008. AIAA 2008-2077. Efstathiou C

76 FR 25378 - Arts and Artifacts Indemnity Panel Advisory; Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-04

... Officer, Michael McDonald, 1100 Pennsylvania Avenue, NW., Washington, DC 20506, or call 202/606-8322. Michael P. McDonald, Management Officer, Advisory Committee. [FR Doc. 2011-10789 Filed 5-3-11; 8:45 am...

Michael Akam and the rise of evolutionary developmental biology

PubMed Central

Stern, David L.; Dawes-Hoang, Rachel E.

2010-01-01

Michael Akam has been awarded the 2007 Kowalevsky medal for his many research accomplishments in the area of evolutionary developmental biology. We highlight three tributaries of Michael’s contribution to evolutionary developmental biology. First, he has made major contributions to our understanding of development of the fruit fly, Drosophila melanogaster. Second, he has maintained a consistent focus on several key problems in evolutionary developmental biology, including the evolving role of Hox genes in arthropods and, more recently, the evolution of segmentation mechanisms. Third, Michael has written a series of influential reviews that have integrated progress in developmental biology into an evolutionary perspective. Michael has also made a large impact on the field through his effective mentorship style, his selfless promotion of younger colleagues, and his leadership of the University Museum of Zoology at Cambridge and the European community of evolutionary developmental biologists. PMID:20209429

Asymmetric synthesis of α-amino acids via homologation of Ni(II) complexes of glycine Schiff bases. Part 3: Michael addition reactions and miscellaneous transformations.

PubMed

Aceña, José Luis; Sorochinsky, Alexander E; Soloshonok, Vadim

2014-09-01

The major goal of this review is a critical discussion of the literature data on asymmetric synthesis of α-amino acids via Michael addition reactions involving Ni(II)-complexes of amino acids. The material covered is divided into two conceptually different groups dealing with applications of: (a) Ni(II)-complexes of glycine as C-nucleophiles and (b) Ni(II)-complexes of dehydroalanine as Michael acceptors. The first group is significantly larger and consequently subdivided into four chapters based on the source of stereocontrolling element. Thus, a chiral auxiliary can be used as a part of nucleophilic glycine Ni(II) complex, Michael acceptor or both, leading to the conditions of matching vs. mismatching stereochemical preferences. The particular focus of the review is made on the practical aspects of the methodology under discussion and mechanistic considerations.

Michael acceptor containing drugs are a novel class of 5-lipoxygenase inhibitor targeting the surface cysteines C416 and C418.

PubMed

Maucher, Isabelle V; Rühl, Michael; Kretschmer, Simon B M; Hofmann, Bettina; Kühn, Benjamin; Fettel, Jasmin; Vogel, Anja; Flügel, Karsten T; Manolikakes, Georg; Hellmuth, Nadine; Häfner, Ann-Kathrin; Golghalyani, Vahid; Ball, Ann-Katrin; Piesche, Matthias; Matrone, Carmela; Geisslinger, Gerd; Parnham, Michael J; Karas, Michael; Steinhilber, Dieter; Roos, Jessica; Maier, Thorsten J

2017-02-01

Recently, we published that nitro-fatty acids (NFA) are potent electrophilic molecules which inhibit 5-lipoxygenase (5-LO) by interacting catalytically with cysteine residues next to a substrate entry channel. The electrophilicity is derived from an intramolecular Michael acceptor moiety consisting of an electron-withdrawing group in close proximity to a double bond. The potential of the Michael acceptor moiety to interact with functionally relevant cysteines of proteins potentially renders them effective and sustained enzyme activity modulators. We screened a large library of naturally derived and synthetic electrophilic compounds to investigate whether other types of Michael acceptor containing drugs suppress 5-LO enzyme activity. The activity was measured by assessing the effect on the 5-LO product formation of intact human polymorphonuclear leukocytes. We demonstrated that a number of structurally different compounds were suppressive in the activity assays and showed that Michael acceptors of the quinone and nitro-alkene group produced the strongest inhibition of 5-LO product formation. Reactivity with the catalytically relevant cysteines 416 and 418 was confirmed using mutated recombinant 5-LO and mass spectrometric analysis (MALDI-MS). In the present study, we show for the first time that a number of well-recognized naturally occurring or synthetic anti-inflammatory compounds carrying a Michael acceptor, such as thymoquinone (TQ), the paracetamol metabolite NAPQI, the 5-LO inhibitor AA-861, and bardoxolone methyl (also known as RTA 402 or CDDO-methyl ester) are direct covalent 5-LO enzyme inhibitors that target the catalytically relevant cysteines 416 and 418. Copyright © 2016 Elsevier Inc. All rights reserved.

Sport Management Interns--Selection Qualifications.

ERIC Educational Resources Information Center

Cuneen, Jacquelyn; Sidwell, M. Joy

1993-01-01

Examines and rates the background qualifications and qualities, identified by sport management practitioners through an examination of paper credentials, that are desired in interviewees vying for selection into sport management internship positions. (GLR)

The insights of health and welfare professionals on hurdles that impede economic evaluations of welfare interventions.

PubMed

Schepers, J; Plaete, J; De Bourdeaudhuij, I; Annemans, L; Simoens, S

2017-08-01

Four hurdles associated with economic evaluations in welfare interventions were identified and discussed in a previous published literature review. These hurdles include (i) 'Ignoring the impact of condition-specific outcomes', (ii) 'Ignoring the impact of QoL externalities', (iii) 'Calculation of costs from a too narrow perspective' and (iv) 'The lack of well-described & standardized interventions'. This study aims to determine how healthcare providers and social workers experience and deal with these hurdles in practice and what solutions or new insights they would suggest. Twenty-two professionals of welfare interventions carried out in Flanders, were interviewed about the four described hurdles using a semi-structured interview. A thematic framework was developed to enable the qualitative analysis. The analysis of the semi-structured interviews was facilitated through the use of the software program QRS NVivo 10. The interviews revealed a clear need to tackle these hurdles. The interviewees confirmed that further study of condition-specific outcomes in economic evaluations are needed, especially in the field of mental health and stress. The proposed dimensions for the condition-specific questionnaires varied however between the groups of interviewees (i.e. general practitioners vs social workers). With respect to QoL externalities, the interviewees confirmed that welfare interventions have an impact on the social environment of the patient (friends and family). There was however no consensus on how this impact of QoL externalities should be taken into account in welfare interventions. Professionals also suggested that besides health care costs, the impact of welfare interventions on work productivity, the patients' social life and other items should be incorporated. Standardization appears to be of limited added value for most of the interviewees because they need a certain degree of freedom to interpret the intervention. Furthermore, the target population of the interventions is diverse which requires a tailor-made approach. This qualitative research demonstrated that these hurdles occur in practice. The proposed solutions for these hurdles can contribute to the improvement of the methodological quality of economic evaluations of welfare interventions.

Digital science games' impact on sixth and eighth graders' perceptions of science

NASA Astrophysics Data System (ADS)

Peng, Li-Wei

2009-12-01

The quasi-experimental study investigated sixth and eighth graders' perceptions of science with gender, grade levels, and educational experiences as the variables. The Theory of Planned Behavior (Ajzen, 1985) claims that attitude toward the behavior, subjective norm, and perceived behavioral control play a major role in people's intentions, and these intentions ultimately impact their behavior. The study adopted a quantitative research approach by conducting a science perceptions survey for examining students' self-efficacy in learning science (i.e., perceived behavioral control), value of science (i.e., attitude toward the behavior), motivation in science (i.e., attitude toward the behavior), and perceptions of digital science games in science classes (i.e., perceived behavioral control). A total of 255 participants' responses from four rural Appalachian middle school science classrooms in southeastern Ohio were analyzed through a three-way ANCOVA factorial pre-test and post-test data analysis with experimental and comparison groups. Additionally, the study applied a semi-structured, in-depth interview as a qualitative research approach to further examine STEAM digital science games' and Fellows' impact on students' perceptions of science. Eight students in the experimental group were interviewed. Interview data were analyzed with an inductive method. The results found in the three-way ANCOVA data analysis indicated that the diversity of educational experiences was a significant factor that impacted sixth and eighth graders' perceptions of science. Additionally, the interaction of gender and educational experiences was another significant factor that impacted sixth and eighth graders' perceptions of science. The findings of the two short-answer questions identified the reasons why the participants liked or disliked science, as well as why the participants would or would not choose a career in science. The conclusions of the semi-structured, in-depth interview supported that the interviewees' perceptions of the STEAM digital science games and Fellows ranged from neutral to positive. Seven out of eight of the interviewees commented that the STEAM digital science games and Fellows enhanced the interviewees' perceptions of science and their choice of careers. Five out of eight of the interviewees intended to have careers in science.

Getting added value from using qualitative research with randomized controlled trials: a qualitative interview study

PubMed Central

2014-01-01

Background Qualitative research is undertaken with randomized controlled trials of health interventions. Our aim was to explore the perceptions of researchers with experience of this endeavour to understand the added value of qualitative research to the trial in practice. Methods A telephone semi-structured interview study with 18 researchers with experience of undertaking the trial and/or the qualitative research. Results Interviewees described the added value of qualitative research for the trial, explaining how it solved problems at the pretrial stage, explained findings, and helped to increase the utility of the evidence generated by the trial. From the interviews, we identified three models of relationship of the qualitative research to the trial. In ‘the peripheral’ model, the trial was an opportunity to undertake qualitative research, with no intention that it would add value to the trial. In ‘the add-on’ model, the qualitative researcher understood the potential value of the qualitative research but it was viewed as a separate and complementary endeavour by the trial lead investigator and wider team. Interviewees described how this could limit the value of the qualitative research to the trial. Finally ‘the integral’ model played out in two ways. In ‘integral-in-theory’ studies, the lead investigator viewed the qualitative research as essential to the trial. However, in practice the qualitative research was under-resourced relative to the trial, potentially limiting its ability to add value to the trial. In ‘integral-in-practice’ studies, interviewees described how the qualitative research was planned from the beginning of the study, senior qualitative expertise was on the team from beginning to end, and staff and time were dedicated to the qualitative research. In these studies interviewees described the qualitative research adding value to the trial although this value was not necessarily visible beyond the original research team due to the challenges of publishing this research. Conclusions Health researchers combining qualitative research and trials viewed this practice as strengthening evaluative research. Teams viewing the qualitative research as essential to the trial, and resourcing it in practice, may have a better chance of delivering its added value to the trial. PMID:24913438

Getting added value from using qualitative research with randomized controlled trials: a qualitative interview study.

PubMed

O'Cathain, Alicia; Goode, Jackie; Drabble, Sarah J; Thomas, Kate J; Rudolph, Anne; Hewison, Jenny

2014-06-09

Qualitative research is undertaken with randomized controlled trials of health interventions. Our aim was to explore the perceptions of researchers with experience of this endeavour to understand the added value of qualitative research to the trial in practice. A telephone semi-structured interview study with 18 researchers with experience of undertaking the trial and/or the qualitative research. Interviewees described the added value of qualitative research for the trial, explaining how it solved problems at the pretrial stage, explained findings, and helped to increase the utility of the evidence generated by the trial. From the interviews, we identified three models of relationship of the qualitative research to the trial. In 'the peripheral' model, the trial was an opportunity to undertake qualitative research, with no intention that it would add value to the trial. In 'the add-on' model, the qualitative researcher understood the potential value of the qualitative research but it was viewed as a separate and complementary endeavour by the trial lead investigator and wider team. Interviewees described how this could limit the value of the qualitative research to the trial. Finally 'the integral' model played out in two ways. In 'integral-in-theory' studies, the lead investigator viewed the qualitative research as essential to the trial. However, in practice the qualitative research was under-resourced relative to the trial, potentially limiting its ability to add value to the trial. In 'integral-in-practice' studies, interviewees described how the qualitative research was planned from the beginning of the study, senior qualitative expertise was on the team from beginning to end, and staff and time were dedicated to the qualitative research. In these studies interviewees described the qualitative research adding value to the trial although this value was not necessarily visible beyond the original research team due to the challenges of publishing this research. Health researchers combining qualitative research and trials viewed this practice as strengthening evaluative research. Teams viewing the qualitative research as essential to the trial, and resourcing it in practice, may have a better chance of delivering its added value to the trial.

Capture and commercialization of blue land crabs ("guaiamum") Cardisoma guanhumi (Lattreille, 1825) along the coast of Bahia State, Brazil: an ethnoecological approach.

PubMed

Firmo, Angélica M S; Tognella, Mônica M P; Silva, Saulo R; Barboza, Raynner R R D; Alves, Rômulo R N

2012-03-19

Blue Land Crab (Cardisoma guanhumi) is one of the most important crustacean species captured and commercialized in Brazil. Although this species is not considered to be threatened with extinction, populations of C. guanhumi are known to be rapidly diminishing due to heavy harvesting pressures and degradation of their natural habitats, highlighting the necessity of developing and implanting management and protection strategies for their populations. There have been no ethnozoological publications that have focused specifically on C. guanhumi, in spite of importance of this type of information for developing efficient management plans of resource utilization. So, the present work describes the ethnoecological aspects of the capture and commercialization of C. guanhumi by a fishing community in northeastern Brazil. Field work was carried out in the municipality of Mucuri, Bahia in Brazil, between the months of January and March/2011 through the use of open semi-structured interviews with all of the crustacean harvesters in city who acknowledged their work in capturing this species, totaling 12 interviewees. The informants were identified through the use of the "snowball" sampling technique. In addition to the interviews themselves, the "guided tour" technique and direct observations was employed. According all the interviewees, the C. guanhumi is popularly called "guaiamum" and is collected in "apicum" zones. They recognize sexual dimorphism in the species based on three morphological characteristics and the harvesters also pointed two stages in the reproductive cycle during the year and another phase mentioned by the interviewees was ecdysis. All of the interviewed affirmed that the size and the quantities C. guanhumi stocks in Mucuri have been diminishing. All of the interviewees agreed that the species and other mangrove resources constituted their principal source of income. The harvesters dedicated three to five days a week to collect Blue Land Crabs and the principal technique utilized for capturing is a trap called a "ratoeira" (rat-trap). The results of the present work demonstrated that the community retains a vast and important volume of knowledge about C. guanhumi that could subsidize both scientific studies and the elaboration of viable management and conservation strategies for this species.

Dr. Michael DeBakey "is a magician of the heart…"

MedlinePlus

... Dr. DeBakey with NLM's David Nash and admiring students from the Michael E. DeBakey High School for ... medical research as the means of discovering improved methods of diagnosis, treatment, prevention, and cure. As far ...

Michael Griffin Oath Of Office

NASA Image and Video Library

2005-04-14

John H. Marburger, Science Adviser to the President and Director of the Office of Science and Technology Policy (OSTP), left, shakes hands with NASA Administrator Michael Griffin following his swearing-in, Thursday, April 14, 2005, in Washington. Photo Credit: (NASA/Renee Bouchard)

Midwest Structural Sciences Center 2010 Annual Report

DTIC Science & Technology

2011-06-01

S. MICHAEL SPOTTSWOOD MICHAEL J. SHEPARD , Chief Senior Aerospace Engineer Analytical Mechanics Branch Analytical Mechanics Branch Structures...Structural Dynamics & Materials Confe- rence, Chicago , IL, Apr. 7-10, 2008. AIAA 2008-2077. Efstathiou C., Carroll J., Sehitoglu H., Lambros J

Specification Technology Guidebook.

DTIC Science & Technology

1985-08-01

1. General Aspects A. Identification JSD - Jackson System Development -. Michael Jackson Systems Limited 17 Conduit Street London, England WIROTD Tel...USER MANAGER ORGANIZATION ə X _ _ _ _ 1-3__ 3-6 X > 6 _ _ D. Primary Source of Document ation Michael Jackson Systems Limited Also see: References

Detail of field breakers in the motor control cabinet for ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Detail of field breakers in the motor control cabinet for unit 3. Control cabinet and breaker panel built by Cutler-Hammer - Wellton-Mohawk Irrigation System, Pumping Plant No. 1, Bounded by Gila River & Union Pacific Railroad, Wellton, Yuma County, AZ

Video Clip of a Rover Rock-Drilling Demonstration at JPL

NASA Image and Video Library

2013-02-20

This frame from a video clip shows moments during a demonstration of drilling into a rock at NASA JPL, Pasadena, Calif., with a test double of the Mars rover Curiosity. The drill combines hammering and rotation motions of the bit.

Hammer toe

MedlinePlus

... by: C. Benjamin Ma, MD, Assistant Professor, Chief, Sports Medicine and Shoulder Service, UCSF Department of Orthopaedic Surgery, San Francisco, CA. Also reviewed by David Zieve, MD, MHA, Isla Ogilvie, PhD, and the A.D.A.M. Editorial team. Toe Injuries and Disorders Read more NIH MedlinePlus ...

The Expansion of Explosives Safety Education for the 21st Century

DTIC Science & Technology

2010-07-01

shape charges, explosive welding, thermite reaction – Sensitivity testing: drop hammer, electrospark discharge, friction – Physics of explosives, history... ATF ) • Phytoremediation workers use plants to remove explosives from soil and render the explosives harmless • Sales of explosives detection

Evaluating Work-Life Balance in the Department of Defense

DTIC Science & Technology

2011-04-18

flextime, telework , paternity leave, and daycare (Frye & Breaugh, 2004; Kossek, Pichler, Bodner, & Hammer, in press). Durand et al. (2003) found that...extended maternity leave, paternity leave, and opportunities for telework . References Adams, G.A., Jex, S.M., & Cunningham, C.J.L. (2006

INTERIOR VIEW OF DEBITEUSE ROOM. MONORAIL USED TO MOVE DEBIS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

INTERIOR VIEW OF DEBITEUSE ROOM. MONORAIL USED TO MOVE DEBIS IS FROM ORIGINAL CLAY HOUSE. VIEW SHOWS WORKER USING AIR HAMMER TO BEGIN FINISH ON DEBI. - Chambers-McKee Window Glass Company, Debiteuse, Clay Avenue Extension, Jeannette, Westmoreland County, PA

Footwear

MedlinePlus

... the Big Toe Ailments of the Smaller Toes Diabetic Foot Treatments Injections and other Procedures Treatments of the ... Shoe IQ How to "Read" Your Shoes Custom Diabetic Shoes 10 Points of Proper Shoe Fit ... Footwear Page Content Do you experience disabling foot problems like bunions, corns, calluses or hammer toes? ...

Effect of pile-driving induced vibrations on nearby structures and other assets.

DOT National Transportation Integrated Search

2013-11-01

The work described here represents an attempt to understand the mechanisms of energy : transfer from steel H-piles driven with diesel hammers to the surrounding soil and the energy : attenuation through the soil by measuring ground motion vibrations ...

Genetics Home Reference: capillary malformation-arteriovenous malformation syndrome

MedlinePlus

... JB, Enjolras O, Cordisco MR, Burrows PE, Clapuyt P, Hammer F, Dubois J, Baselga E, Brancati F, Carder R, Quintal JM, Dallapiccola B, Fischer G, Frieden IJ, Garzon M, Harper J, Johnson-Patel J, Labrèze C, Martorell L, Paltiel HJ, Pohl ...

33 CFR 110.173 - Port of Charleston, SC.

Code of Federal Regulations, 2010 CFR

2010-07-01

... located 1800 yards, 118° true from St. Michaels Church Spire and has a diameter of 500 yards. Vessels...°30′ true, 1375 yards from St. Michaels Church Spire and has a diameter of 1400 feet. The use of this...

Operational Leadership in Kosovo

DTIC Science & Technology

2004-02-09

ARRC) LGEN Michael Jackson Allied Air Forces North (COMAIRNORTH) GEN John Jumper Allied Naval Forces North (COMNAVNORTH) U.K. Allied Naval Forces South... Michael Jackson reportedly told the US commander (Clark) during one heated exchange. When General Jackson refused, General Clark asked Admiral James

Highly convergent synthesis of chiral bicyclophosphinates by domino hydrophosphinylation/Michael/Michael reaction.

PubMed

Fourgeaud, Pierre; Daydé, Bénédicte; Volle, Jean-Noël; Vors, Jean-Pierre; Van der Lee, Arie; Pirat, Jean-Luc; Virieux, David

2011-10-07

Diastereoselective domino reactions of iminoalcohols and allenyl H-phosphinates produce chiral phosphorus bicycles in a regio- and stereoselective fashion. A predictive model for diastereoselection is used for these new chiral phosphinic esters. © 2011 American Chemical Society

Michael Tomasello: Award for Distinguished Scientific Contributions.

PubMed

2015-11-01

The APA Awards for Distinguished Scientific Contributions are presented to persons who, in the opinion of the Committee on Scientific Awards, have made distinguished theoretical or empirical contributions to basic research in psychology. One of the 2015 award winners is Michael Tomasello, who received this award for "outstanding empirical and theoretical contributions to understanding what makes the human mind unique. Michael Tomasello's pioneering research on the origins of social cognition has led to revolutionary insights in both developmental psychology and primate cognition." Tomasello's award citation, biography, and a selected bibliography are presented here. (c) 2015 APA, all rights reserved).

Reliability of the Achilles tendon tap reflex evoked during stance using a pendulum hammer.

PubMed

Mildren, Robyn L; Zaback, Martin; Adkin, Allan L; Frank, James S; Bent, Leah R

2016-01-01

The tendon tap reflex (T-reflex) is often evoked in relaxed muscles to assess spinal reflex circuitry. Factors contributing to reflex excitability are modulated to accommodate specific postural demands. Thus, there is a need to be able to assess this reflex in a state where spinal reflex circuitry is engaged in maintaining posture. The aim of this study was to determine whether a pendulum hammer could provide controlled stimuli to the Achilles tendon and evoke reliable muscle responses during normal stance. A second aim was to establish appropriate stimulus parameters for experimental use. Fifteen healthy young adults stood on a forceplate while taps were applied to the Achilles tendon under conditions in which postural sway was constrained (by providing centre of pressure feedback) or unconstrained (no feedback) from an invariant release angle (50°). Twelve participants repeated this testing approximately six months later. Within one experimental session, tap force and T-reflex amplitude were found to be reliable regardless of whether postural sway was constrained (tap force ICC=0.982; T-reflex ICC=0.979) or unconstrained (tap force ICC=0.968; T-reflex ICC=0.964). T-reflex amplitude was also reliable between experimental sessions (constrained ICC=0.894; unconstrained ICC=0.890). When a T-reflex recruitment curve was constructed, optimal mid-range responses were observed using a 50° release angle. These results demonstrate that reliable Achilles T-reflexes can be evoked in standing participants without the need to constrain posture. The pendulum hammer provides a simple method to allow researchers and clinicians to gather information about reflex circuitry in a state where it is involved in postural control. Copyright © 2015 Elsevier B.V. All rights reserved.

Development of size reduction equations for calculating power input for grinding pine wood chips using hammer mill

DOE Office of Scientific and Technical Information (OSTI.GOV)

Naimi, Ladan J.; Collard, Flavien; Bi, Xiaotao

Size reduction is an unavoidable operation for preparing biomass for biofuels and bioproduct conversion. Yet, there is considerable uncertainty in power input requirement and the uniformity of ground biomass. Considerable gains are possible if the required power input for a size reduction ratio is estimated accurately. In this research three well-known mechanistic equations attributed to Rittinger, Kick, and Bond available for predicting energy input for grinding pine wood chips were tested against experimental grinding data. Prior to testing, samples of pine wood chips were conditioned to 11.7% wb, moisture content. The wood chips were successively ground in a hammer millmore » using screen sizes of 25.4 mm, 10 mm, 6.4 mm, and 3.2 mm. The input power and the flow of material into the grinder were recorded continuously. The recorded power input vs. mean particle size showed that the Rittinger equation had the best fit to the experimental data. The ground particle sizes were 4 to 7 times smaller than the size of installed screen. Geometric mean size of particles were calculated using two methods (1) Tyler sieves and using particle size analysis and (2) Sauter mean diameter calculated from the ratio of volume to surface that were estimated from measured length and width. The two mean diameters agreed well, pointing to the fact that either mechanical sieving or particle imaging can be used to characterize particle size. In conclusion, specific energy input to the hammer mill increased from 1.4 kWh t –1 (5.2 J g –1) for large 25.1-mm screen to 25 kWh t –1 (90.4 J g –1) for small 3.2-mm screen.« less

Measuring the Seismic and Acoustic Time of Flight - Lessons in Earthquakes and Thunder

NASA Astrophysics Data System (ADS)

Leeman, J.; Ammon, C. J.

2016-12-01

When teaching the fundamentals of waves and wave propagation, students must appreciate and understand that different waves travel through different materials at different speeds. We describe a simple experiment to explore acoustic wave propagation through the ground and the air and how to use those observations to locate the source of the waves. The experiment that can be performed with a geophone, a microphone, and an oscilloscope. For this activity, students will strike a metal plate, equipped with a vibration trigger, with a hammer. The blow triggers an oscilloscope to begin recording data in a "single-shot" mode. The two channels of the oscilloscope record the output of the microphone (measuring the energy of sound waves in the air) and the geophone (measuring the seismic wave energy in the ground). Seismic waves reach the geophone earlier than the sound waves since they travel at approximately ten times the speed. Students can measure the travel time on the oscilloscope, or using data downloaded to a computer. With measurements of the travel time and distance to the hammer, students can calculate the velocity of each wave. Then, the hammer can be used at other distances from the sensors and by measuring the difference in arrival time of the two waves, students can estimate the distance to the source which they check by direct measurement. This exercise can be directly connected to common observations such as seeing lighting before hearing thunder. The activity also connects directly to concepts related to earthquake location. We describe pedagogical materials, including experiment instructions, videos and data for those who do not have access to the equipment, and simple exercise suggestions for classroom activities.

Technical report for a fluidless directional drilling system demonstrated at Solid Waste Storage Area 6 shallow buried waste sites

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The purpose of the research was to demonstrate a fluidless directional drilling and monitoring system (FDD) specifically tailored to address environmental drilling concerns for shallow buried wasted. The major concerns are related to worker exposure, minimizing waste generation, and confining the spread of contamination. The FDD is potentially applicable to Environmental Restoration (ER) activities for the Oak Ridge National Laboratory Waste Area Grouping 6 (WAG 6) shallow buried waste disposed in unlined trenches. Major ER activities for directional drilling are to develop a drilling system for leachate collection directly beneath trenches, and to provide localized control over leachate release tomore » the environment. Other ER FDD activities could include vadose zone and groundwater monitoring of contaminant transport. The operational constraints pointed the research in the direction of purchasing a steerable impact hammer, or mole, manufactured by Steer-Rite Ltd. of Racine, Wisconsin. This drill was selected due to the very low cost ($25,000) associated with procuring the drill, steering module, instrumentation and service lines. The impact hammer is a self propelled drill which penetrates the soil by compacting cut material along the sidewalls of the borehole. Essentially, it forces its way through the subsurface. Although the pneumatic hammer exhausts compressed air which must be handled at the borehole collar, it does not generate soil cuttings or liquids. This is the basis for the term fluidless. A stub casing muffler was attached to the entrance hole for controlling exhaust gas and any airborne releases. Other environmental compliance modifications made to the equipment included operating the tool without lubrication, and using water instead of hydraulic fluid to actuate the steering fins on the tool.« less

Impact of process conditions on the density and durability of wheat, oat, canola, and barley straw briquettes

DOE PAGES

Tumuluru, J. S.; Tabil, L. G.; Song, Y.; ...

2014-10-01

The present study is to understand the impact of process conditions on the quality attributes of wheat oat, barley, and canola straw briquettes. Analysis of variance indicated that briquette moisture content and initial density immediately after compaction and final density after 2 weeks of storage are strong functions of feedstock moisture content and compression pressure, whereas durability rating is influenced by die temperature and feedstock moisture content. Briquettes produced at a low feedstock moisture content of 9 % (w.b.) yielded maximum densities >700 kg/m3 for wheat, oat, canola, and barley straws. Lower feedstock moisture content of <10 % (w.b.) andmore » higher die temperatures >110 °C and compression pressure >10 MPa minimized the briquette moisture content and maximized densities and durability rating based on surface plots observations. Optimal process conditions indicated that a low feedstock moisture content of about 9 % (w.b.), high die temperature of 120–130 °C, medium-to-large hammer mill screen sizes of about 24 to 31.75 mm, and low to high compression pressures of 7.5 to 12.5 MPa minimized briquette moisture content to <8 % (w.b.) and maximized density to >700 kg/m3. Durability rating >90 % is achievable at higher die temperatures of >123 °C, lower to medium feedstock moisture contents of 9 to 12 % (w.b.), low to high compression pressures of 7.5 to 12.5 MPa, and large hammer mill screen size of 31.75 mm, except for canola where a lower compression pressure of 7.5 to 8.5 MPa and a smaller hammer mill screen size of 19 mm for oat maximized the durability rating values.« less

Vascular hand-arm vibration syndrome--magnetic resonance angiography.

PubMed

Poole, C J M; Cleveland, T J

2016-01-01

The diagnosis of vascular hand-arm vibration syndrome (HAVS) requires consistent symptoms, photographic evidence of digital blanching and sufficient exposure to hand-transmitted vibration (HTV; A(8) > 2.5 m/s2). There is no reliable quantitative investigation for distinguishing HAVS from other causes of Raynaud's phenomenon and from normal individuals. Hypothenar and thenar hammer syndromes produce similar symptoms to HAVS but are difficult to diagnose clinically and may be confused with HAVS. Magnetic resonance angiography (MRA) is a safe and minimally invasive method of visualizing blood vessels. Three cases of vascular HAVS are described in which MRA revealed occlusions of the ulnar, radial and superficial palmar arteries. It is proposed that HTV was the cause of these occlusions, rather than blows to the hand unrelated to vibration, the assumed mechanism for the hammer syndromes. All three cases were advised not to expose their hands to HTV despite one of them being at Stockholm vascular stage 2 (early). MRA should be the investigation of choice for stage 2 vascular HAVS or vascular HAVS with unusual features or for a suspected hammer syndrome. The technique is however technically challenging and best done in specialist centres in collaboration with an occupational physician familiar with the examination of HAVS cases. Staging for HAVS should be developed to include anatomical arterial abnormalities as well as symptoms and signs of blanching. Workers with only one artery supplying a hand, or with only one palmar arch, may be at increased risk of progression and therefore should not be exposed to HTV irrespective of their Stockholm stage. © The Author 2015. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Shock-induced nanobubble collapse and its applications

NASA Astrophysics Data System (ADS)

Vedadi, Mohammad Hossein

The shock-induced collapse of nanobubbles in water is investigated using molecular dynamics simulations based on a reactive force field. Monitoring the collapse of a cavitation nanobubble, we observe a focused nanojet at the onset of bubble shrinkage and a water hammer shock wave upon bubble collapse. The nanojet length scales linearly with the nanobubble radius, as observed in experiments on micron-to-millimeter size bubbles. The shock induces dramatic structural changes, including an ice-VII-like structural motif at a particle velocity of approximately 1 km/s. The incipient ice VII formation and the calculated Hugoniot curve are in good agreement with experimental results. Moreover, a substantial number of positive and negative ions appear when the nanojet hits the distal side of the nanobubble and the water hammer shock forms. Furthermore, two promising applications of shock-induced nanobubble collapse have been explored. Our simulations of poration in lipid bilayers due to shock-induced collapse of nanobubbles reveal penetration of nanojets into lipid bilayers. The nanojet impact generates shear flow of water on bilayer leaflets and pressure gradients across them, which transiently enhance the bilayer permeability by creating nanopores through which water molecules translocate across the bilayer. The effects of nanobubble size and temperature on the porosity of lipid bilayers are examined. Finally, the shock-induced collapse of CO2-filled nanobubbles in water is investigated. The energetic nanojet and high-pressure water hammer shock formed during and after collapse of the nanobubble trigger mechano-chemical H2O-CO2 reactions, some of which lead to splitting of water molecules. The dominant pathways through which splitting of water molecules occur are identified.

Development of size reduction equations for calculating power input for grinding pine wood chips using hammer mill

DOE PAGES

Naimi, Ladan J.; Collard, Flavien; Bi, Xiaotao; ...

2016-01-05

Size reduction is an unavoidable operation for preparing biomass for biofuels and bioproduct conversion. Yet, there is considerable uncertainty in power input requirement and the uniformity of ground biomass. Considerable gains are possible if the required power input for a size reduction ratio is estimated accurately. In this research three well-known mechanistic equations attributed to Rittinger, Kick, and Bond available for predicting energy input for grinding pine wood chips were tested against experimental grinding data. Prior to testing, samples of pine wood chips were conditioned to 11.7% wb, moisture content. The wood chips were successively ground in a hammer millmore » using screen sizes of 25.4 mm, 10 mm, 6.4 mm, and 3.2 mm. The input power and the flow of material into the grinder were recorded continuously. The recorded power input vs. mean particle size showed that the Rittinger equation had the best fit to the experimental data. The ground particle sizes were 4 to 7 times smaller than the size of installed screen. Geometric mean size of particles were calculated using two methods (1) Tyler sieves and using particle size analysis and (2) Sauter mean diameter calculated from the ratio of volume to surface that were estimated from measured length and width. The two mean diameters agreed well, pointing to the fact that either mechanical sieving or particle imaging can be used to characterize particle size. In conclusion, specific energy input to the hammer mill increased from 1.4 kWh t –1 (5.2 J g –1) for large 25.1-mm screen to 25 kWh t –1 (90.4 J g –1) for small 3.2-mm screen.« less

41 CFR 301-1.3 - Who is eligible for TDY allowances?

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Interviewees performing pre-employment interview travel; (c) Employees who must interrupt official business travel to perform emergency travel as a result of an incapacitating illness or injury or a personal...

Why do young adults with Type 1 diabetes find it difficult to manage diabetes in the workplace?

PubMed

Balfe, Myles; Brugha, Ruairi; Smith, Diarmuid; Sreenan, Seamus; Doyle, Frank; Conroy, Ronan

2014-03-01

This article explores how and why workplace environments impact diabetes management for adults people with Type 1 diabetes, 23-30 years of age. Interviews were conducted with 35 young adults, 29 women and 6 men. The majority of these interviewees worked in sectors such as banking, technology and administration. Young adults found it difficult to manage diabetes in the workplace for two main reasons: work-related time pressures and the non-routine nature of interviewees' work and working environment. Young adults also found it difficult to get the time to exercise both inside and outside of work. Young adults with Type 1 diabetes need to be provided with the tools and technologies that they need to manage diabetes in modern flexible workplaces. Copyright © 2014 Elsevier Ltd. All rights reserved.

A window of opportunity: declining rates of hepatitis B virus infection among injection drug users in Rio de Janeiro, and prospects for targeted hepatitis B vaccination.

PubMed

Oliveira, Sabrina A N; Hacker, Mariana A; Oliveira, M Lourdes A; Yoshida, Clara F T; Telles, Paulo R; Bastos, Francisco I

2005-01-01

To measure hepatitis B virus (HBV) infection rates among injection drug users in Rio de Janeiro, Brazil, and to report their knowledge of and attitudes toward hepatitis and HBV vaccination. 609 injection drug users recruited in Rio de Janeiro between 1999 and 2001 answered a questionnaire and were tested for hepatitis B and other blood-borne infections. Questions covered sociodemographic information, alcohol and illicit drug consumption, drug injection and sexual practices, medical history, and knowledge about HIV, AIDS and viral hepatitis. The prevalence of HBV infection was 27.1%, with 3.4% of the sample positive for HbsAg (active infection) and 0.8% positive for anti-HBs (indicating previous HBV vaccination). Most interviewees (81.3%) were aware of at least one form of viral hepatitis and received information from many different sources. In agreement with laboratory findings, 96.7% of the interviewees stated they had never been vaccinated against hepatitis B, but almost all unvaccinated interviewees (97.8%) said they would volunteer to be vaccinated if HBV vaccination were available. Few of the injection drug users surveyed had ever been vaccinated against HBV. Although most were aware of the risks posed by viral hepatitis, this awareness seldom translated into consistent behavioral change. The participants' willingness to be vaccinated against HBV suggests that the implementation of vaccination for this population may help decrease rates of hepatitis B infection.

Effect of knowledge and economic status on sandfly control activities by householders at risk of cutaneous leishmaniasis in the subandean region of Huila department, Colombia.

PubMed

Pardo, Raúl H; Carvajal, Alexander; Ferro, Cristina; Davies, Clive R

2006-10-01

Householder vector control measures can be encouraged by health promotion campaigns which take into account peoples' attitudes and focus on key gaps in knowledge. To describe household sandfly control practices in an endemic area of cutaneous leishmaniasis in the department of Huila, Colombia, and determine how these are influenced by attitudes, knowledge and socioeconomic status. A household questionnaire was applied to collect information on: demography, socioeconomic status, knowledge of cutaneous leishmaniasis and of sandflies and their role in transmission, and the control activities practiced. Indoor sandfly abundance was estimated by light trap collections. Amongst 249 interviewees, 86% knew about cutaneous leishmaniasis and 98% sand flies. 35% of interviewees who knew about cutaneous leishmaniasis practiced measures with the purpose of its control. This practice was higher amongst the 32% who knew that sand flies transmit cutaneous leishmaniasis. However, 82% of interviewees practiced sand fly control measures, and these were significantly associated with high sand fly abundance. Measures included smoke, bednets, and house spraying with insecticide or non-insecticidal substances. Householders using the high cost measures (bednets and insecticide) had the highest economic status. Health education programmes should note that sand fly nuisance can initiate control measures, but that knowledge of the role of sand flies in transmission could enhance activities. The socioeconomic findings indicate that targeted bednet subsidies could reduce inequities in health status amongst cutaneous leishmaniasis endemic communities.

Mental and behavioral health environments: critical considerations for facility design.

PubMed

Shepley, Mardelle McCuskey; Watson, Angela; Pitts, Francis; Garrity, Anne; Spelman, Elizabeth; Kelkar, Janhawi; Fronsman, Andrea

2016-01-01

The purpose of the study was to identify features in the physical environment that are believed to positively impact staff and patients in psychiatric environments and use these features as the foundation for future research regarding the design of mental and behavioral health facilities. Pursuant to a broad literature review that produced an interview script, researchers conducted 19 interviews of psychiatric staff, facility administrators and architects. Interview data were analyzed using the highly structured qualitative data analysis process authored by Lincoln and Guba (1985). Seventeen topics were addressed ranging from the importance of a deinstitutionalized environment to social interaction and autonomy. The interviewees reinforced the controversy that exists around the implications of a deinstitutionalized environment, when the resulting setting diminishes patient and staff safety. Respondents tended to support open nurse stations vs. enclosed stations. Support for access to nature and the provision of an aesthetic environment was strong. Most interviewees asserted that private rooms were highly desirable because lower room density reduces the institutional character of a unit. However, a few interviewees adamantly opposed private rooms because they considered the increased supervision of one patient by another to be a deterrent to self-harm. The need to address smoking rooms in future research received the least support of all topics. Responses of interviews illustrate current opinion regarding best practice in the design of psychiatric facilities. The findings emphasize the need for more substantive research on appropriate physical environments in mental and behavioral health settings. Copyright © 2016 Elsevier Inc. All rights reserved.

Unconventional natural gas development and public health: toward a community-informed research agenda

PubMed Central

Korfmacher, Katrina Smith; Elam, Sarah; Gray, Kathleen M.; Haynes, Erin; Hughes, Megan Hoert

2015-01-01

Unconventional natural gas development (UNGD) using high-volume horizontal hydraulic fracturing (“fracking”) has vastly increased the potential for domestic natural gas production in recent years. However, the rapid expansion of UNGD has also raised concerns about its potential impacts on public health. Academics and government agencies are developing research programs to explore these concerns. Community involvement in activities such as planning, conducting, and communicating research is widely recognized as having an important role in promoting environmental health. Historically, however, communities most often engage in research after environmental health concerns have emerged. This community information needs assessment took a prospective approach to integrating community leaders' knowledge, perceptions, and concerns into the research agenda prior to initiation of local UNGD. We interviewed community leaders about their views on environmental health information needs in three states (New York, North Carolina, and Ohio) prior to widespread UNGD. Interviewees emphasized the cumulative, long-term, and indirect determinants of health, as opposed to specific disease outcomes. Responses focused not only on information needs, but also on communication and transparency with respect to research processes and funding. Interviewees also prioritized investigation of policy approaches to effectively protect human health over the long term. Although universities were most often cited as a credible source of information, interviewees emphasized the need for multiple strategies for disseminating information. By including community leaders' concerns, insights, and questions from the outset, the research agenda on UNGD is more likely to effectively inform decision making that ultimately protects public health. PMID:25204212

[Study of the healthcare background and psychosocial environment of the Maghrebian immigrant population in Catalonia [Spain

PubMed

Saura, Rosa Maria; Suñol, Rosa; Vallejo, Paula; Lahoz, Sonia; Atxotegui, Joseba; El Manouari, Mohamed

2008-01-01

The aim of this study was to gather information on the healthcare background and social environment of the Maghrebian immigrant population in Catalonia in order to guide the management and provision of social services and the work of the organizations supporting this collective. To gather data, we used a questionnaire exploring healthcare and social variables, including stressors and social support. Data collection was performed by pollsters in Arabic. We performed 403 interviews. Most interviewees had a health card providing access to public healthcare and knew where to access healthcare. The most frequently used services were primary care and emergency departments. In primary care, almost all of the interviewees were provided explanations, but 30% were unable to understand them properly. Health professionals seemed to have inadequate awareness of cultural and religious differences. Work, housing, distance from the family, and legal status were stressful factors for more than half of this population. Social support was low. Three quarters of the interviewees felt lonely. More than half of this population had completely or partially fulfilled their expectations of migration, while 11% felt they were in a worse situation. The main areas for improvement are the provision of information on conditions of healthcare access, promotion of social interaction, the use of associations for immigrants especially during the first phases of the migration process and facilitating religious activities. Health professionals should be provided with training in intercultural issues.

77 FR 20820 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-06

... Trust, and Gloria Foley, all of Lovington, Illinois, and Paul Michael Hrvol, Jr. and Paul Michael Hrvol... Bancorp, Inc. and thereby indirectly control Hardware State Bank, both of Lovington, Illinois. Board of...

76 FR 59416 - Senior Executive Service Performance Review Board

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-26

... Anderson, Gary Anderson, Penny Andrews, John Armstrong, Charles R. Armstrong, Sue Athmann, Ronald Ayala, Janice Barber, Delores Baroukh, Nader Bartoldus, Charles Bathurst, Donald Bauhs, Kim Beagles, James... Butcher, Michael Button, Christopher Byrne, Michael Byrne, Sean J. Cahill, Donna L. Callahan, Mary Ellen...

MICHAEL "RUDI" RUDOLPHI SPEAKING AT MISSION SUCCESS FORUM

NASA Image and Video Library

2016-06-16

MICHAEL "RUDI" RUDOLPHI GESTURES DURING A "MISSION SUCCESS IS IN OUR HANDS" SHARED EXPERIENCES FORUM JUNE 16, WHERE HE SPOKE ABOUT HIS "UNFORGETTABLE" EXPERIENCES AS A SENIOR NASA REPRESENTATIVE OVERSEEING DEBRIS RECOVERY EFFORTS FOLLOWING THE LOSS OF SPACE SHUTTLE COLUMBIA AND ITS CREW.

Michael Griffin Meets with Elon Musk

NASA Image and Video Library

2005-04-19

NASA Administrator Michael Griffin, left, meets with CEO of SpaceX Elon Musk, right, Wednesday, April 20, 2005 at NASA Headquarters in Washington. Looking on in the background are Larry Williams, NASA astronaut Marsha Ivins and NASA manager Christopher Shank. Photo Credit: (NASA/Renee Bouchard)

A Perspective on Research Challenges in Information Security

DTIC Science & Technology

2011-11-01

UNCLASSIFIED A Perspective on Research Challenges in Information Security Tamas Abraham, David Adie, Angela Billard, Paul Buckland, Michael Frangos ...Abstract (U) 4. AUTHORS Tamas Abraham, David Adie, Angela Billard, Paul Buckland, Michael Frangos , Ben Long, Mar- tin Lucas, Paul Montague, Dean Philp

Astronaut Michael Clifford takes a break during bailout training

NASA Technical Reports Server (NTRS)

1993-01-01

Astronaut Michael R.U. (Rich) Clifford takes a break while video taping crew mates in training in the JSC Weightless Environment Training Facility (WETF). He is pictured with Trent G. Keeple, a member of the training staff assigned to STS-59.

The Northern Ireland Framework for Peace: Terrorism and its Aftermath

DTIC Science & Technology

2012-04-10

Manchester University Press, 2000. Crawshaw , Colonel (Retd) Michael. The Evolution of British COIN. Joint Doctrine Publication 3-40: 19...Margaret E. McGuinness (Maryland: Rowman & Littlefield, 2000), 206. 35 Colonel (Retd) Michael Crawshaw , “The Evolution of British COIN”. Joint

Meet EPA Ecologist Michael Murrell, Ph.D.

EPA Pesticide Factsheets

Michael Murrel, Ph.D., is a EPA research ecologist working on the Gulf of Mexico Hypoxia Project, helping develop models of the northern Gulf to quantify the links between freshwater flowing into the Gulf from the land, nutrients, and hypoxia—“dead zones”

Medical Command in the Contingency Force

DTIC Science & Technology

1992-04-15

briefing. 36. Foust, interview. 37. Interviews with Michael J. Kussman , Carlisle, PA, 10 December 1991 and 5 February 1992. 38. Timboe, interview. 39... Kussman , Michael J., Internal Medicine Consultant to the Army Surgeon General, Office of Medical Corps Affairs, 1989-91. Interviews by author, 10

77 FR 62490 - Performance Review Board Appointments

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-15

...; Gutter, Karis T.; Harden, Krysta.; Hipp, Janie; Holtzman, Max T.; Jett, Carole E.; Jones, Carmen....; Chasteen, G. Taylor; Christian, Lisa A.; Clanton, Michael W.; Coffee, Richard; Farington, Kim S.; Foster....; Watts, Michael; White, John S.; White, Sharmian L.; Wilburn, Curtis; Wilusz, Lisa; Young, Benjamin...

STS-34 Pilot Michael J. McCulley uses ARRIFLEX camera equipment

NASA Image and Video Library

1989-04-13

STS-34 Atlantis, Orbiter Vehicle (OV) 104, Pilot Michael J. McCulley squints while looking through ARRIFLEX camera eye piece during camera briefing at JSC. McCulley rests part of the camera on his shoulder as he operates it.

Michael Sadler and the German Connection.

ERIC Educational Resources Information Center

Higginson, J. H.

1990-01-01

Chronicles works of Michael Sadler who compared British and German educational systems, emphasizing Germany's contributions in technical education. Presents Sadler's 1912 recommendations--eight lessons premised upon powerful centralized government's ability to implement policy. Reflects on how World War I and Nazism influenced Sadler's thought and…

Michael F. Vaccaro Honors Attorney Fellowship Program in our Philadelphia (Region 3) Office

EPA Pesticide Factsheets

The Michael F. Vaccaro Honors Attorney Fellowship provides a unique opportunity to practice law in a major governmental environmental organization, and to receive extensive training in and exposure to environmental law and policy work in the public sector.

Enantioselective Michael Addition of Pyrroles with Nitroalkenes in Aqueous Media Catalyzed by a Water-soluble Catalyst.

PubMed

Gui, Yang; Li, Yanan; Sun, Jianan; Zha, Zhenggen; Wang, Zhiyong

2018-06-11

A new water-soluble catalytic system were developed and therefor used in an enantioselective Michael addition of pyrroles with nitroalkenes in water to afford the nitroethylpyrrole derivatives with both excellent yields and ee values.

Michael Griffin Senate Hearing

NASA Image and Video Library

2005-05-17

NASA Administrator Dr. Michael Griffin speaks in front of the Senate Commerce Committee Science and Space Subcommittee hearing on Human Space Flight: The Space Shuttle and Beyond, Wednesday, May 18, 2005, in the Russell Senate Office Building on Capitol Hill in Washington. Photo Credit: (NASA/Bill Ingalls)

Full Spectrum Operations: A Running Start

DTIC Science & Technology

2009-03-31

looking like nails. —MAJ Curt Taylor , S3 2-8 IN, Diwaniyah, Iraq, August 2006. To avoid the hammer and nails dynamic that may plague maneuver...Gasification System from Princeton Environmental Group; the AgriPower system, based on the “open” Brayton Cycle technology; and Thermogenics

Implementation of the soil compactor analyzer into test method TEX-113-E : technical report.

DOT National Transportation Integrated Search

2012-04-01

Test method Tex-113-E prepares laboratory aggregate base test specimens with an impact hammer : compactor. These specimens are used for compaction characteristics and design tests. Although the : historical Tex-113-E required a certain amount of comp...

Preparing Tomorrow's Science Teachers

ERIC Educational Resources Information Center

Hammer, Margaret; Polnick, Barbara

2007-01-01

Many undergraduates seeking elementary teaching certification are uncomfortable with or uninterested in science; however, these future teachers are charged with the responsibility of teaching science to young students. Hammer and Polnick surveyed science methods students at Sam Houston State University and found that only about half of them rated…

Facility Accounting: Hammering Out a Capital Replacement Budget.

ERIC Educational Resources Information Center

Readinger, Jay

1996-01-01

Most facility and finance managers cannot adequately handle school infrastructure issues because they lack the tools to describe the problem appropriately. Facility accounting gives managers accurate deferral and projected replacement costs, using nationally recognized life-cycle and cost data. Facility accounting enables proper management of…

Underwater acoustic noise generation and propagation resulting from pile driving for Oregon bridge construction.

DOT National Transportation Integrated Search

2014-06-01

There is growing concern about noise levels from pile driving activities associated with the : construction of highway bridges and other in-water structures. It has been demonstrated that noise : generated from pile driving with an impact hammer can ...

7 CFR 1944.405 - Authorized use of grant funds.

Code of Federal Regulations, 2011 CFR

2011-01-01

...'s Compensation, employer's share of social security, health benefits, and a reasonable tax deferred... as hammers and handsaws. (f) Payment of liability insurance and special purpose audit costs... general liability insurance cost and the cost of audits for the organization are generally indirect costs...

Mitochondrial DNA, restoring Beethovens music.

PubMed

Merheb, Maxime; Vaiedelich, Stéphane; Maniguet, Thiérry; Hänni, Catherine

2016-01-01

Great ancient composers have endured many obstacles and constraints which are very difficult to understand unless we perform the restoration process of ancient music. Species identification in leather used during manufacturing is the key step to start such a restoration process in order to produce a facsimile of a museum piano. Our study reveals the species identification in the leather covering the hammer head in a piano created by Erard in 1802. This is the last existing piano similar to the piano that Beethoven used with its leather preserved in its original state. The leather sample was not present in a homogeneous piece, yet combined with glue. Using a DNA extraction method that avoids PCR inhibitors; we discovered that sheep and cattle are the origin of the combination. To identify the species in the leather, we focused on the amounts of mitochondrial DNA in both leather and glue and results have led us to the conclusion that the leather used to cover the hammer head in this piano was made of cattle hide.

The design of a simulated forcible entry test for fire fighters.

PubMed

Pelot, R P; Dwyer, J W; Deakin, J M; McCabe, J F

1999-04-01

This study investigated the physiological responses and performances for 20 fire fighters when completing simulated forcible entry tests. The purpose was to establish the validity of using a tire striking test and to examine the effects of varying the test parameters. The tests consisted of striking a reinforced structure and a weighted truck tire on a plywood covered table with either a 4.54 or a 5.60 kg sledge hammer. The results indicate that the simulated forcible entry tests are short in duration (range = 8.0-17.6 s), but are also physically demanding in terms of cardiovascular response (range = 86.5-97.2 for a percentage of heart rate reserve). The differences in striking a reinforced structure versus hitting a tire were insignificant according to most of the measures taken. The parameters for the simulated forcible entry test that were determined to be most appropriate were to move the tire 30 cm and use the 4.54 kg sledge hammer.

Stable sonoluminescence within a water hammer tube.

PubMed

Chakravarty, Avik; Georghiou, Theo; Phillipson, Tacye E; Walton, Alan J

2004-06-01

The sonoluminescence (SL) from the collapse of a single gas bubble within a liquid can be produced repetitively using an acoustic resonator. An alternative technique using a water hammer tube, producing SL from bubbles of greater size, is described here. A sealed vertical tube partly filled with a liquid and a gas at low pressure is subjected to vertical vibrations. The oscillation of the pressure within the liquid column, due to inertial forces, excites cavitation bubbles to grow and collapse. Rotation is used to confine the bubbles to the axis of the tube. Bright SL emissions were observed in a number of liquids. Repetitive emission was produced from bubbles in condensed phosphoric acid. Bubbles of 0.4 mm ambient radius (containing 2x 10(14) xenon atoms) were excited by vibration at 35 Hz. Approximately 10(12) photons were emitted per collapse in the range 400-700 nm (over four orders of magnitude greater than the brightest SL reported previously), corresponding to a 1% efficiency of the conversion of mechanical energy into light.

Shock waves from non-spherically collapsing cavitation bubbles

NASA Astrophysics Data System (ADS)

Supponen, Outi; Obreschkow, Danail; Farhat, Mohamed

2017-11-01

Combining simultaneous high-speed imaging and hydrophone measurements, we uncover details of the multiple shock wave emission from laser-induced cavitation bubbles collapsing in a non-spherical way. For strongly deformed bubbles collapsing near a free surface, we identify the distinct shock waves caused by the jet impact onto the opposite bubble wall and by the individual collapses of the remaining bubble segments. The energy carried by each of these shocks depends on the level of bubble deformation, quantified by the anisotropy parameter ζ, the dimensionless equivalent of the Kelvin impulse. For jetting bubbles, at ζ < 0.01 , the jet impact hammer pressure is found to be the most energetic shock. Through statistical analysis of the experimental data and theoretical derivations, and by comparing bubbles deformed by different sources (variable gravity achieved on parabolic flights, and neighboring free and rigid surfaces), we find that the shock peak pressure may be approximated as the jet impact-induced water hammer as ph = 0.45 (ρc2 Δp) 1 / 2ζ-1 .

Mapreduce is Good Enough? If All You Have is a Hammer, Throw Away Everything That's Not a Nail!

PubMed

Lin, Jimmy

2013-03-01

Hadoop is currently the large-scale data analysis "hammer" of choice, but there exist classes of algorithms that aren't "nails" in the sense that they are not particularly amenable to the MapReduce programming model. To address this, researchers have proposed MapReduce extensions or alternative programming models in which these algorithms can be elegantly expressed. This article espouses a very different position: that MapReduce is "good enough," and that instead of trying to invent screwdrivers, we should simply get rid of everything that's not a nail. To be more specific, much discussion in the literature surrounds the fact that iterative algorithms are a poor fit for MapReduce. The simple solution is to find alternative, noniterative algorithms that solve the same problem. This article captures my personal experiences as an academic researcher as well as a software engineer in a "real-world" production analytics environment. From this combined perspective, I reflect on the current state and future of "big data" research.

Podcasting the Anthropocene: Student engagement, storytelling and the rise of a new model for outreach and interdisciplinary science communication training

NASA Astrophysics Data System (ADS)

Osborne, M. C.; Traer, M. M.; Hayden, T.

2012-12-01

Generation Anthropocene is a student-driven audio podcast series and ongoing project initiated by Michael Osborne, co-produced by Miles Traer, and overseen by Thomas Hayden, all from Stanford University's School of Earth Sciences. The project began as a seminar course where students conducted long-form one-on-one interviews with faculty at Stanford's college radio station, KZSU. Conversation topics covered a range of interdisciplinary issues related to the proposed new geologic boundary delineating "the age of man," including biodiversity loss, historical perceptions of the environment, urban design, agricultural systems, and human-environment interaction. Students researched and selected their own interview subjects, proposed interviewees and questions to the group and solicited critical feedback through small-group work-shopping. Students then prepared interview questionnaires, vetted by the instructors, and conducted in-depth, in-person interviews. Students work-shopped and edited the recorded interviews in a collaborative setting. The format of each interview is conversational, inter-generational, and driven by student interest. In addition to learning areas of academic expertise, advanced interviewing techniques and elements of audio production, the students also explored the diversity of career trajectories in the Earth sciences and allied fields, and the power of human-based stories to communicate complexity and uncertainty for a general audience. The instructors produced the final pieces, and released them online for general public consumption (http://www.stanford.edu/group/anthropocene/cgi-bin/wordpress/). Following the initial release, the Generation Anthropocene podcast series has subsequently been aired weekly at the leading environmental news outlet Grist (grist.org). The program has also expanded to include interviews with non-Stanford subjects, and is currently expanding to other campuses. The Generation Anthropocene program serves as a model for both interdisciplinary curriculum development and science communication outreach. We offer a conceptual framework for establishing similar programs at other institutions.

After This Nothing Happened

ERIC Educational Resources Information Center

Alsop, Steve; Fawcett, Leesa

2010-01-01

In response to Michiel van Eijck and Wolff-Michael Roth's article and Michael Mueller and Deborah Tippin's rejoinder, we explore traditional ecological knowledges as science education. Adopting a stance of situated partial perspectives, and drawing on selected literature in science and technology studies and feminist postcolonial theories, we…

Theory and practice in action: the contributions of Michael Perkins to clinical linguistics.

PubMed

Damico, Jack S; Lynch, Karen E

2013-01-01

This article reviews the scholarly contributions of Michael R. Perkins in the discipline of clinical linguistics and provides some indication of the reasons that he has been so successful. Three primary attributes were described through an analysis of his publications.

Operational Art in Cyber Defense

DTIC Science & Technology

2013-04-16

a personal curiosity. I used the masculine when referring to the Commander and the adversary throughout this paper for brevity. Alanis 1...issue 63, (4th quarter 2011): 70-73. 13 Carl von Clausewitz, On War, ed. Michael Howard and Peter Paret, trans . Michael Howard and Peter Paret