Sample records for introduction tensegrity structures

  1. Genetic Optimization of a Tensegrity Structure

    NASA Technical Reports Server (NTRS)

    Taylor, Jaime R.

    2002-01-01

    Marshall Space Flight Center (MSFC) is charged with developing advanced technologies for space telescopes. The next generation of space optics will be very large and lightweight. Tensegrity structures are built of compressive members (bars), and tensile members (strings). For most materials, the tensile strength of a longitudinal member is larger than its buckling strength; therefore a large stiffness to mass ratio can be achieved by increasing the use of tensile members. Tensegrities are the epitome of lightweight structures, since they take advantage of the larger tensile strength of materials. The compressive members of tensegrity structures are disjoint allowing compact storage of the structure. The structure has the potential to eliminate the requirement for assembly by man in space; it can be deployed by adjustments in its cable tension. A tensegrity structure can be more reliably modeled since none of the individual members experience bending moments. (Members that experience deformation in more than one dimension are much harder to model.) A. Keane and S. Brown designed a satellite boom truss system with an enhanced vibration performance. They started with a standard truss system, then used a genetic algorithm to alter the design, while optimizing the vibration performance. An improvement of over 20,000% in frequency-averaged energy levels was obtained using this approach. In this report an introduction to tensegrity structures is given, along with a description of how to generate the nodal coordinates and connectivity of a multiple stage cylindrical tensegrity structure. A description of how finite elements can be used to develop a stiffness and mass matrix so that the modes of vibration can be determined from the eigenvalue problem is shown. A brief description of a micro genetic algorithm is then presented.

  2. Design of a novel wheeled tensegrity robot: a comparison of tensegrity concepts and a prototype for travelling air ducts.

    PubMed

    Carreño, Francisco; Post, Mark A

    2018-01-01

    Efforts in the research of tensegrity structures applied to mobile robots have recently been focused on a purely tensegrity solution to all design requirements. Locomotion systems based on tensegrity structures are currently slow and complex to control. Although wheeled locomotion provides better efficiency over distances there is no literature available on the value of wheeled methods with respect to tensegrity designs, nor on how to transition from a tensegrity structure to a fixed structure in mobile robotics. This paper is the first part of a larger study that aims to combine the flexibility, light weight, and strength of a tensegrity structure with the efficiency and simple control of a wheeled locomotion system. It focuses on comparing different types of tensegrity structure for applicability to a mobile robot, and experimentally finding an appropriate transitional region from a tensegrity structure to a conventional fixed structure on mobile robots. It applies this transitional structure to what is, to the authors' knowledge, the design of the world's first wheeled tensegrity robot that has been designed with the goal of traversing air ducts.

  3. Design and control of compliant tensegrity robots through simulation and hardware validation

    PubMed Central

    Caluwaerts, Ken; Despraz, Jérémie; Işçen, Atıl; Sabelhaus, Andrew P.; Bruce, Jonathan; Schrauwen, Benjamin; SunSpiral, Vytas

    2014-01-01

    To better understand the role of tensegrity structures in biological systems and their application to robotics, the Dynamic Tensegrity Robotics Lab at NASA Ames Research Center, Moffett Field, CA, USA, has developed and validated two software environments for the analysis, simulation and design of tensegrity robots. These tools, along with new control methodologies and the modular hardware components developed to validate them, are presented as a system for the design of actuated tensegrity structures. As evidenced from their appearance in many biological systems, tensegrity (‘tensile–integrity’) structures have unique physical properties that make them ideal for interaction with uncertain environments. Yet, these characteristics make design and control of bioinspired tensegrity robots extremely challenging. This work presents the progress our tools have made in tackling the design and control challenges of spherical tensegrity structures. We focus on this shape since it lends itself to rolling locomotion. The results of our analyses include multiple novel control approaches for mobility and terrain interaction of spherical tensegrity structures that have been tested in simulation. A hardware prototype of a spherical six-bar tensegrity, the Reservoir Compliant Tensegrity Robot, is used to empirically validate the accuracy of simulation. PMID:24990292

  4. Self-equilibrated Tapered Three-stage Tensegrity Mast

    NASA Astrophysics Data System (ADS)

    Oh, C. L.; Choong, K. K.; Nishimura, T.; Lee, S. W.

    2018-04-01

    Investigation of tensegrity structures for the space application is ongoing owing to the characteristics of being lightweight and flexible. Tensegrity structures consist of struts and cables are self-stressed and stable under gravitational loading. Form-finding is an important process to obtain the configuration of tensegrity structures that are in self-equilibrated state. Form-finding of tensegrity structures involves a complex computational strategy in solving the geometrical and forces of the structures. This paper aims to form-finding for a tapered three-stage tensegrity mast. The form-finding strategy involves the assemblage of the tensegrity mast, establishment of equilibrium equations and determination of one possible set of coefficient beta. Several cases of configurations with various twist angles with range of 20°-40° are investigated. A configuration with 9 struts and 42 cables satisfying the material elastic conditions was successfully found. The scalable self-equilibrated tensegrity mast is recommended for space applications.

  5. Design and control of compliant tensegrity robots through simulation and hardware validation.

    PubMed

    Caluwaerts, Ken; Despraz, Jérémie; Işçen, Atıl; Sabelhaus, Andrew P; Bruce, Jonathan; Schrauwen, Benjamin; SunSpiral, Vytas

    2014-09-06

    To better understand the role of tensegrity structures in biological systems and their application to robotics, the Dynamic Tensegrity Robotics Lab at NASA Ames Research Center, Moffett Field, CA, USA, has developed and validated two software environments for the analysis, simulation and design of tensegrity robots. These tools, along with new control methodologies and the modular hardware components developed to validate them, are presented as a system for the design of actuated tensegrity structures. As evidenced from their appearance in many biological systems, tensegrity ('tensile-integrity') structures have unique physical properties that make them ideal for interaction with uncertain environments. Yet, these characteristics make design and control of bioinspired tensegrity robots extremely challenging. This work presents the progress our tools have made in tackling the design and control challenges of spherical tensegrity structures. We focus on this shape since it lends itself to rolling locomotion. The results of our analyses include multiple novel control approaches for mobility and terrain interaction of spherical tensegrity structures that have been tested in simulation. A hardware prototype of a spherical six-bar tensegrity, the Reservoir Compliant Tensegrity Robot, is used to empirically validate the accuracy of simulation. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

  6. Design and Control of Compliant Tensegrity Robots Through Simulation and Hardware Validation

    NASA Technical Reports Server (NTRS)

    Caluwaerts, Ken; Despraz, Jeremie; Iscen, Atil; Sabelhaus, Andrew P.; Bruce, Jonathan; Schrauwen, Benjamin; Sunspiral, Vytas

    2014-01-01

    To better understand the role of tensegrity structures in biological systems and their application to robotics, the Dynamic Tensegrity Robotics Lab at NASA Ames Research Center has developed and validated two different software environments for the analysis, simulation, and design of tensegrity robots. These tools, along with new control methodologies and the modular hardware components developed to validate them, are presented as a system for the design of actuated tensegrity structures. As evidenced from their appearance in many biological systems, tensegrity ("tensile-integrity") structures have unique physical properties which make them ideal for interaction with uncertain environments. Yet these characteristics, such as variable structural compliance, and global multi-path load distribution through the tension network, make design and control of bio-inspired tensegrity robots extremely challenging. This work presents the progress in using these two tools in tackling the design and control challenges. The results of this analysis includes multiple novel control approaches for mobility and terrain interaction of spherical tensegrity structures. The current hardware prototype of a six-bar tensegrity, code-named ReCTeR, is presented in the context of this validation.

  7. Controlling Tensegrity Robots through Evolution using Friction based Actuation

    NASA Technical Reports Server (NTRS)

    Kothapalli, Tejasvi; Agogino, Adrian K.

    2017-01-01

    Traditional robotic structures have limitations in planetary exploration as their rigid structural joints are prone to damage in new and rough terrains. In contrast, robots based on tensegrity structures, composed of rods and tensile cables, offer a highly robust, lightweight, and energy efficient solution over traditional robots. In addition tensegrity robots can be highly configurable by rearranging their topology of rods, cables and motors. However, these highly configurable tensegrity robots pose a significant challenge for locomotion due to their complexity. This study investigates a control pattern for successful locomotion in tensegrity robots through an evolutionary algorithm. A twelve-rod hardware model is rapidly prototyped to utilize a new actuation method based on friction. A web-based physics simulation is created to model the twelve-rod tensegrity ball structure. Square-waves are used as control policies for the actuators of the tensegrity structure. Monte Carlo trials are run to find the most successful number of amplitudes for the square-wave control policy. From the results, an evolutionary algorithm is implemented to find the most optimized solution for locomotion of the twelve-rod tensegrity structure. The software pattern coupled with the new friction based actuation method can serve as the basis for highly efficient tensegrity robots in space exploration.

  8. A reconfigurable robot with tensegrity structure using nylon artificial muscle

    NASA Astrophysics Data System (ADS)

    Wu, Lianjun; de Andrade, Monica Jung; Brahme, Tarang; Tadesse, Yonas; Baughman, Ray H.

    2016-04-01

    This paper describes the design and experimental investigation of a self-reconfigurable icosahedral robot for locomotion. The robot consists of novel and modular tensegrity structures, which can potentially maneuver in unstructured environments while carrying a payload. Twisted and Coiled Polymer (TCP) muscles were utilized to actuate the tensegrity structure as needed. The tensegrity system has rigid struts and flexible TCP muscles that allow keeping a payload in the central region. The TCP muscles provide large actuation stroke, high mechanical power per fiber mass and can undergo millions of highly reversible cycles. The muscles are electrothermally driven, and, upon stimulus, the heated muscles reconfigure the shape of the tensegrity structure. Here, we present preliminary experimental results that determine the rolling motion of the structure.

  9. Self-stress control of real civil engineering tensegrity structures

    NASA Astrophysics Data System (ADS)

    Kłosowska, Joanna; Obara, Paulina; Gilewski, Wojciech

    2018-01-01

    The paper introduces the impact of the self-stress level on the behaviour of the tensegrity truss structures. Displacements for real civil engineering tensegrity structures are analysed. Full-scale tensegrity tower Warnow Tower which consists of six Simplex trusses is considered in this paper. Three models consisting of one, two and six modules are analysed. The analysis is performed by the second and third order theory. Mathematica software and Sofistik programme is applied to the analysis.

  10. Knowledge of damage identification about tensegrities via flexibility disassembly

    NASA Astrophysics Data System (ADS)

    Jiang, Ge; Feng, Xiaodong; Du, Shigui

    2017-12-01

    Tensegrity structures composing of continuous cables and discrete struts are under tension and compression, respectively. In order to determine the damage extents of tensegrity structures, a new method for tensegrity structural damage identification is presented based on flexibility disassembly. To decompose a tensegrity structural flexibility matrix into the matrix represention of the connectivity between degress-of-freedoms and the diagonal matrix comprising of magnitude informations. Step 1: Calculate perturbation flexibility; Step 2: Compute the flexibility connectivity matrix and perturbation flexibility parameters; Step 3: Calculate the perturbation stiffness parameters. The efficiency of the proposed method is demonstrated by a numeical example comprising of 12 cables and 4 struts with pretensioned. Accurate identification of local damage depends on the availability of good measured data, an accurate and reasonable algorithm.

  11. Design and Control of Modular Spine-Like Tensegrity Structures

    NASA Technical Reports Server (NTRS)

    Mirletz, Brian T.; Park, In-Won; Flemons, Thomas E.; Agogino, Adrian K.; Quinn, Roger D.; SunSpiral, Vytas

    2014-01-01

    We present a methodology enabled by the NASA Tensegrity Robotics Toolkit (NTRT) for the rapid structural design of tensegrity robots in simulation and an approach for developing control systems using central pattern generators, local impedance controllers, and parameter optimization techniques to determine effective locomotion strategies for the robot. Biomimetic tensegrity structures provide advantageous properties to robotic locomotion and manipulation tasks, such as their adaptability and force distribution properties, flexibility, energy efficiency, and access to extreme terrains. While strides have been made in designing insightful static biotensegrity structures, gaining a clear understanding of how a particular structure can efficiently move has been an open problem. The tools in the NTRT enable the rapid exploration of the dynamics of a given morphology, and the links between structure, controllability, and resulting gait efficiency. To highlight the effectiveness of the NTRT at this exploration of morphology and control, we will provide examples from the designs and locomotion of four different modular spine-like tensegrity robots.

  12. Tensegrity I. Cell structure and hierarchical systems biology

    NASA Technical Reports Server (NTRS)

    Ingber, Donald E.

    2003-01-01

    In 1993, a Commentary in this journal described how a simple mechanical model of cell structure based on tensegrity architecture can help to explain how cell shape, movement and cytoskeletal mechanics are controlled, as well as how cells sense and respond to mechanical forces (J. Cell Sci. 104, 613-627). The cellular tensegrity model can now be revisited and placed in context of new advances in our understanding of cell structure, biological networks and mechanoregulation that have been made over the past decade. Recent work provides strong evidence to support the use of tensegrity by cells, and mathematical formulations of the model predict many aspects of cell behavior. In addition, development of the tensegrity theory and its translation into mathematical terms are beginning to allow us to define the relationship between mechanics and biochemistry at the molecular level and to attack the larger problem of biological complexity. Part I of this two-part article covers the evidence for cellular tensegrity at the molecular level and describes how this building system may provide a structural basis for the hierarchical organization of living systems--from molecule to organism. Part II, which focuses on how these structural networks influence information processing networks, appears in the next issue.

  13. Deployable antenna kinematics using tensegrity structure design

    NASA Astrophysics Data System (ADS)

    Knight, Byron Franklin

    With vast changes in spacecraft development over the last decade, a new, cheaper approach was needed for deployable kinematic systems such as parabolic antenna reflectors. Historically, these mesh-surface reflectors have resembled folded umbrellas, with incremental redesigns utilized to save packaging size. These systems are typically over-constrained designs, the assumption being that high reliability necessary for space operations requires this level of conservatism. But with the rapid commercialization of space, smaller launch platforms and satellite buses have demanded much higher efficiency from all space equipment than can be achieved through this incremental approach. This work applies an approach called tensegrity to deployable antenna development. Kenneth Snelson, a student of R. Buckminster Fuller, invented Tensegrity structures in 1948. Such structures use a minimum number of compression members (struts); stability is maintain using tension members (ties). The novelty introduced in this work is that the ties are elastic, allowing the struts to extend or contract, and in this way changing the surface of the antenna. Previously, the University of Florida developed an approach to quantify the stability and motion of parallel manipulators. This approach was applied to deployable, tensegrity, antenna structures. Based on the kinematic analyses for the 3-3 (octahedron) and 4-4 (square anti-prism) structures, the 6-6 (hexagonal anti-prism) analysis was completed which establishes usable structural parameters. The primary objective for this work was to prove the stability of this class of deployable structures, and their potential application to space structures. The secondary objective is to define special motions for tensegrity antennas, to meet the subsystem design requirements, such as addressing multiple antenna-feed locations. This work combines the historical experiences of the artist (Snelson), the mathematician (Ball), and the space systems engineer (Wertz) to develop a new, practical design approach. This kinematic analysis of tensegrity structures blends these differences to provide the design community with a new approach to lightweight, robust, adaptive structures with the high reliability that space demands. Additionally, by applying Screw Theory, a tensegrity structure antenna can be commanded to move along a screw axis, and therefore meeting the requirement to address multiple feed locations.

  14. Controlling Tensegrity Robots Through Evolution

    NASA Technical Reports Server (NTRS)

    Iscen, Atil; Agogino, Adrian; SunSpiral, Vytas; Tumer, Kagan

    2013-01-01

    Tensegrity structures (built from interconnected rods and cables) have the potential to offer a revolutionary new robotic design that is light-weight, energy-efficient, robust to failures, capable of unique modes of locomotion, impact tolerant, and compliant (reducing damage between the robot and its environment). Unfortunately robots built from tensegrity structures are difficult to control with traditional methods due to their oscillatory nature, nonlinear coupling between components and overall complexity. Fortunately this formidable control challenge can be overcome through the use of evolutionary algorithms. In this paper we show that evolutionary algorithms can be used to efficiently control a ball-shaped tensegrity robot. Experimental results performed with a variety of evolutionary algorithms in a detailed soft-body physics simulator show that a centralized evolutionary algorithm performs 400 percent better than a hand-coded solution, while the multi-agent evolution performs 800 percent better. In addition, evolution is able to discover diverse control solutions (both crawling and rolling) that are robust against structural failures and can be adapted to a wide range of energy and actuation constraints. These successful controls will form the basis for building high-performance tensegrity robots in the near future.

  15. Potential function of element measurement for form-finding of wide sense tensegrity

    NASA Astrophysics Data System (ADS)

    Soe, C. K.; Obiya, H.; Koga, D.; Nizam, Z. M.; Ijima, K.

    2018-04-01

    Tensegrity is a unique morphological structure in which disconnected compression members and connected tension members make the whole structure in self-equilibrium. Many researches have been done on tensegrity structure because of its mysteriousness in form-finding analysis. This study is proposed to investigate the trends and to group into some patterns of the shape that a tensegrity structure can have under the same connectivity and support condition. In this study, tangent stiffness method adopts two different functions, namely power function and logarithm function to element measurement. Numerical examples are based on a simplex initial shape with statically determinate support condition to examine the pure effectiveness of two proposed methods. The tangent stiffness method that can evaluate strict rigid body displacement of elements has a superiority to define various measure potentials and to allow the use of virtual element stiffness freely. From the results of numerical examples, the finding of the dominant trends and patterns of the equilibrium solutions is achieved although it has many related solutions under the same circumstances.

  16. Hardware Design and Testing of SUPERball, A Modular Tensegrity Robot

    NASA Technical Reports Server (NTRS)

    Sabelhaus, Andrew P.; Bruce, Jonathan; Caluwaerts, Ken; Chen, Yangxin; Lu, Dizhou; Liu, Yuejia; Agogino, Adrian K.; SunSpiral, Vytas; Agogino, Alice M.

    2014-01-01

    We are developing a system of modular, autonomous "tensegrity end-caps" to enable the rapid exploration of untethered tensegrity robot morphologies and functions. By adopting a self-contained modular approach, different end-caps with various capabilities (such as peak torques, or motor speeds), can be easily combined into new tensegrity robots composed of rods, cables, and actuators of different scale (such as in length, mass, peak loads, etc). As a first step in developing this concept, we are in the process of designing and testing the end-caps for SUPERball (Spherical Underactuated Planetary Exploration Robot), a project at the Dynamic Tensegrity Robotics Lab (DTRL) within NASA Ames's Intelligent Robotics Group. This work discusses the evolving design concepts and test results that have gone into the structural, mechanical, and sensing aspects of SUPERball. This representative tensegrity end-cap design supports robust and repeatable untethered mobility tests of the SUPERball, while providing high force, high displacement actuation, with a low-friction, compliant cabling system.

  17. Trusses Of Tensegrity Type In A Concept Of Train Station Renovation In Żary

    NASA Astrophysics Data System (ADS)

    Lechocka, Paulina

    2015-09-01

    The first railway station in Żary was built in 1843 in Germany. After the Second World War and years of socialism in Poland the meaning of railway decreased and its technical condition deteriorated. Now the building needs renovation and change of function. Tensegrity structures may be useful in renovation of platforms shelter. They are strut and tie construction, in which there is self-stabilization between compressed and tensioned elements. Conception of new platform shelter is based on exemplary tensegrity module consist of three struts and nine cables (called "Simplex"). Tensegrity would make railway station more modern, but not cover its original elevation.

  18. Vibration health monitoring for tensegrity structures

    NASA Astrophysics Data System (ADS)

    Ashwear, Nasseradeen; Eriksson, Anders

    2017-02-01

    Tensegrities are assembly structures, getting their equilibrium from the interaction between tension in cables and compression in bars. During their service life, slacking in their cables and nearness to buckling in their bars need to be monitored to avoid a sudden collapse. This paper discusses how to design the tensegrities to make them feasible for vibrational health monitoring methods. Four topics are discussed; suitable finite elements formulation, pre-measurements analysis to find the locations of excitation and sensors for the interesting modes, the effects from some environmental conditions, and the pre-understanding of the effects from different slacking scenarios.

  19. Tensegrity and mechanoregulation: from skeleton to cytoskeleton

    NASA Technical Reports Server (NTRS)

    Chen, C. S.; Ingber, D. E.

    1999-01-01

    OBJECTIVE: To elucidate how mechanical stresses that are applied to the whole organism are transmitted to individual cells and transduced into a biochemical response. DESIGN: In this article, we describe fundamental design principles that are used to stabilize the musculoskeletal system at many different size scales and show that these design features are embodied in one particular form of architecture that is known as tensegrity. RESULTS: Tensegrity structures are characterized by use of continuous tension and local compression; architecture, prestress (internal stress prior to application of external force), and triangulation play the most critical roles in terms of determining their mechanical stability. In living organisms, use of a hierarchy of tensegrity networks both optimizes structural efficiency and provides a mechanism to mechanically couple the parts with the whole: mechanical stresses applied at the macroscale result in structural rearrangements at the cell and molecular level. CONCLUSION: Due to use of tensegrity architecture, mechanical stress is concentrated and focused on signal transducing molecules that physically associate with cell surface molecules that anchor cells to extracellular matrix, such as integrins, and with load-bearing elements within the internal cytoskeleton and nucleus. Mechanochemical transduction may then proceed through local stress-dependent changes in molecular mechanics, thermodynamics, and kinetics within the cell. In this manner, the entire cellular response to stress may be orchestrated and tuned by altering the prestress in the cell, just as changing muscular tone can alter mechanical stability and structural coordination throughout the whole musculoskeletal system.

  20. The analysis of tensegrity structures for the design of a morphing wing

    NASA Astrophysics Data System (ADS)

    Moored, Keith W., III; Bart-Smith, Hilary

    2005-05-01

    Tensegrity structures have become of engineering interest in recent years, but very few have found practical use. This lack of integration is attributed to the lack of a well formulated design procedure. In this paper, a preliminary procedure is presented for developing morphing tensegrity structures that include actuating elements. To do this, the virtual work method has been modified to allow for individual actuation of struts and cables. A generalized connectivity matrix for a cantilever beam constructed from either a single 4-strut cell or multiple 4-strut cells has been developed. Global deflections resulting from actuation of specific elements have been calculated. Furthermore, the force density method is expanded to include a necessary upper bound condition such that a physically feasible structure can be designed. Finally, the importance of relative force density values on the overall shape of a structure comprising of multiple unit cells is discussed.

  1. Lightweight Deployable Mirrors with Tensegrity Supports

    NASA Technical Reports Server (NTRS)

    Zeiders, Glenn W.; Bradford, Larry J.; Cleve, Richard C.

    2004-01-01

    The upper part of Figure 1 shows a small-scale prototype of a developmental class of lightweight, deployable structures that would support panels in precise alignments. In this case, the panel is hexagonal and supports disks that represent segments of a primary mirror of a large telescope. The lower part of Figure 1 shows a complete conceptual structure containing multiple hexagonal panels that hold mirror segments. The structures of this class are of the tensegrity type, which was invented five decades ago by artist Kenneth Snelson. A tensegrity structure consists of momentfree compression members (struts) and tension members (cables). The structures of this particular developmental class are intended primarily as means to erect large segmented primary mirrors of astronomical telescopes or large radio antennas in outer space. Other classes of tensegrity structures could also be designed for terrestrial use as towers, masts, and supports for general structural panels. An important product of the present development effort is the engineering practice of building a lightweight, deployable structure as an assembly of tensegrity modules like the one shown in Figure 2. This module comprises two octahedral tensegrity subunits that are mirror images of each other joined at their plane of mirror symmetry. In this case, the plane of mirror symmetry is both the upper plane of the lower subunit and the lower plane of the upper subunit, and is delineated by the midheight triangle in Figure 2. In the configuration assumed by the module to balance static forces under mild loading, the upper and lower planes of each sub-unit are rotated about 30 , relative to each other, about the long (vertical) axis of the structure. Larger structures can be assembled by joining multiple modules like this one at their sides or ends. When the module is compressed axially (vertically), the first-order effect is an increase in the rotation angle, but by virtue of the mirror arrangement, the net first-order rotation between the uppermost and lowermost planes is zero. The need to have zero net rotation between these planes under all loading conditions in a typical practical structure is what prompts the use of the mirror configuration. Force and moment loadings other than simple axial compression produce only second-order deformations through strains in the struts and cables.

  2. Biologically-Inspired Control for a Planetary Exploration Tensegrity Robot

    NASA Technical Reports Server (NTRS)

    Leroy, Marc

    2017-01-01

    Tensegrity structures are becoming increasingly popular as mechanical structures for robots. Their inherent compliance makes them extremely robust to environmental disturbances, and their design allows them to have a high strength-to-weight ratio whilst being lightweight compared to traditional robots. For these reasons they would be of interest to the aerospace industry, particularly for planetary exploration. However, being such compliant structures thanks to their network of elastic elements also means that their control is not an easy task. Relying solely on traditional control strategies to generate efficient locomotion would surely be near impossible due to the complex oscillatory motions and nonlinear interactions of its members. The goal of this project was to use bio-inspired control techniques to generate locomotion for a tensegrity icosahedron, namely the SUPERball project of the Intelligent Robotics Group of NASA Ames Research Center.

  3. Comparison of massage based on the tensegrity principle and classic massage in treating chronic shoulder pain.

    PubMed

    Kassolik, Krzysztof; Andrzejewski, Waldemar; Brzozowski, Marcin; Wilk, Iwona; Górecka-Midura, Lucyna; Ostrowska, Bożena; Krzyżanowski, Dominik; Kurpas, Donata

    2013-09-01

    The purpose of this study was to compare the clinical outcomes of classic massage to massage based on the tensegrity principle for patients with chronic idiopathic shoulder pain. Thirty subjects with chronic shoulder pain symptoms were divided into 2 groups, 15 subjects received classic (Swedish) massage to tissues surrounding the glenohumeral joint and 15 subjects received the massage using techniques based on the tensegrity principle. The tensegrity principle is based on directing treatment to the painful area and the tissues (muscles, fascia, and ligaments) that structurally support the painful area, thus treating tissues that have direct and indirect influence on the motion segment. Both treatment groups received 10 sessions over 2 weeks, each session lasted 20 minutes. The McGill Pain Questionnaire and glenohumeral ranges of motion were measured immediately before the first massage session, on the day the therapy ended 2 weeks after therapy started, and 1 month after the last massage. Subjects receiving massage based on the tensegrity principle demonstrated statistically significance improvement in the passive and active ranges of flexion and abduction of the glenohumeral joint. Pain decreased in both massage groups. This study showed increases in passive and active ranges of motion for flexion and abduction in patients who had massage based on the tensegrity principle. For pain outcomes, both classic and tensegrity massage groups demonstrated improvement. Copyright © 2013 National University of Health Sciences. Published by Mosby, Inc. All rights reserved.

  4. On the geometrically nonlinear elastic response of class θ = 1 tensegrity prisms

    NASA Astrophysics Data System (ADS)

    Mascolo, Ida; Amendola, Ada; Zuccaro, Giulio; Feo, Luciano; Fraternali, Fernando

    2018-03-01

    The present work studies the geometrically nonlinear response of class ϑ=1 tensegrity prisms modeled as a collection of elastic springs reacting in tension (strings or cables) or compression (bars), under uniform uniaxial loading. The incremental equilibrium equations of the structure are numerically solved through a path-following procedure, with the aim of modeling the mechanical behavior of the structure in the large displacement regime. Several numerical results are presented with reference to a variety of physical models, which use two different materials for the cables and the bars, and show different aspect ratios associated with either 'standard' or 'expanded' configurations. An experimental validation of the predicted constitutive response is conducted with reference to a 'thick' and a 'slender' model, observing rather good theory vs. experiment matching. The given numerical and experimental results highlight that the elastic response of the examined structures may switch from stiffening to softening, depending on the geometry of the system, the magnitude of the external load, and the applied prestress. The outcomes of the current study confirm previous literature results on the elastic response of minimal tensegrity prisms, and pave the way to the use of tensegrity systems as nonlinear spring units forming tunable mechanical metamaterials.

  5. On tensegrity in cell mechanics.

    PubMed

    Volokh, K Y

    2011-09-01

    All models are wrong, but some are useful. This famous saying mirrors the situation in cell mechanics as well. It looks like no particular model of the cell deformability can be unconditionally preferred over others and different models reveal different aspects of the mechanical behavior of living cells. The purpose of the present work is to discuss the so-called tensegrity models of the cell cytoskeleton. It seems that the role of the cytoskeleton in the overall mechanical response of the cell was not appreciated until Donald Ingber put a strong emphasis on it. It was fortunate that Ingber linked the cytoskeletal structure to the fascinating art of tensegrity architecture. This link sparked interest and argument among biologists, physicists, mathematicians, and engineers. At some point the enthusiasm regarding tensegrity perhaps became overwhelming and as a reaction to that some skepticism built up. To demystify Ingber's ideas the present work aims at pinpointing the meaning of tensegrity and its role in our understanding of the importance of the cytoskeleton for the cell deformability and motility. It should be noted also that this paper emphasizes basic ideas rather than carefully follows the chronology of the development of tensegrity models. The latter can be found in the comprehensive review by Dimitrije Stamenovic (2006) to which the present work is complementary.

  6. Mechanical behavior in living cells consistent with the tensegrity model

    NASA Technical Reports Server (NTRS)

    Wang, N.; Naruse, K.; Stamenovic, D.; Fredberg, J. J.; Mijailovich, S. M.; Tolic-Norrelykke, I. M.; Polte, T.; Mannix, R.; Ingber, D. E.

    2001-01-01

    Alternative models of cell mechanics depict the living cell as a simple mechanical continuum, porous filament gel, tensed cortical membrane, or tensegrity network that maintains a stabilizing prestress through incorporation of discrete structural elements that bear compression. Real-time microscopic analysis of cells containing GFP-labeled microtubules and associated mitochondria revealed that living cells behave like discrete structures composed of an interconnected network of actin microfilaments and microtubules when mechanical stresses are applied to cell surface integrin receptors. Quantitation of cell tractional forces and cellular prestress by using traction force microscopy confirmed that microtubules bear compression and are responsible for a significant portion of the cytoskeletal prestress that determines cell shape stability under conditions in which myosin light chain phosphorylation and intracellular calcium remained unchanged. Quantitative measurements of both static and dynamic mechanical behaviors in cells also were consistent with specific a priori predictions of the tensegrity model. These findings suggest that tensegrity represents a unified model of cell mechanics that may help to explain how mechanical behaviors emerge through collective interactions among different cytoskeletal filaments and extracellular adhesions in living cells.

  7. Optimization of a tensegrity wing for biomimetic applications

    NASA Astrophysics Data System (ADS)

    Moored, Keith W., III; Taylor, Stuart A.; Bart-Smith, Hilary

    2006-03-01

    Current attempts to build fast, efficient, and maneuverable underwater vehicles have looked to nature for inspiration. However, they have all been based on traditional propulsive techniques, i.e. rotary motors. In the current study a promising and potentially revolutionary approach is taken that overcomes the limitations of these traditional methods-morphing structure concepts with integrated actuation and sensing. Inspiration for this work comes from the manta ray (Manta birostris) and other batoid fish. These creatures are highly maneuverable but are also able to cruise at high speeds over long distances. In this paper, the structural foundation for the biomimetic morphing wing is a tensegrity structure. A preliminary procedure is presented for developing morphing tensegrity structures that include actuating elements. A shape optimization method is used that determines actuator placement and actuation amount necessary to achieve the measured biological displacement field of a ray. Lastly, an experimental manta ray wing is presented that measures the static and dynamic pressure field acting on the ray's wings during a normal flapping cycle.

  8. Design and Evolution of a Modular Tensegrity Robot Platform

    NASA Technical Reports Server (NTRS)

    Bruce, Jonathan; Caluwaerts, Ken; Iscen, Atil; Sabelhaus, Andrew P.; SunSpiral, Vytas

    2014-01-01

    NASA Ames Research Center is developing a compliant modular tensegrity robotic platform for planetary exploration. In this paper we present the design and evolution of the platform's main hardware component, an untethered, robust tensegrity strut, with rich sensor feedback and cable actuation. Each strut is a complete robot, and multiple struts can be combined together to form a wide range of complex tensegrity robots. Our current goal for the tensegrity robotic platform is the development of SUPERball, a 6-strut icosahedron underactuated tensegrity robot aimed at dynamic locomotion for planetary exploration rovers and landers, but the aim is for the modular strut to enable a wide range of tensegrity morphologies. SUPERball is a second generation prototype, evolving from the tensegrity robot ReCTeR, which is also a modular, lightweight, highly compliant 6-strut tensegrity robot that was used to validate our physics based NASA Tensegrity Robot Toolkit (NTRT) simulator. Many hardware design parameters of the SUPERball were driven by locomotion results obtained in our validated simulator. These evolutionary explorations helped constrain motor torque and speed parameters, along with strut and string stress. As construction of the hardware has finalized, we have also used the same evolutionary framework to evolve controllers that respect the built hardware parameters.

  9. A tensegrity model for hydrogen bond networks in proteins.

    PubMed

    Bywater, Robert P

    2017-05-01

    Hydrogen-bonding networks in proteins considered as structural tensile elements are in balance separately from any other stabilising interactions that may be in operation. The hydrogen bond arrangement in the network is reminiscent of tensegrity structures in architecture and sculpture. Tensegrity has been discussed before in cells and tissues and in proteins. In contrast to previous work only hydrogen bonds are studied here. The other interactions within proteins are either much stronger - covalent bonds connecting the atoms in the molecular skeleton or weaker forces like the so-called hydrophobic interactions. It has been demonstrated that the latter operate independently from hydrogen bonds. Each category of interaction must, if the protein is to have a stable structure, balance out. The hypothesis here is that the entire hydrogen bond network is in balance without any compensating contributions from other types of interaction. For sidechain-sidechain, sidechain-backbone and backbone-backbone hydrogen bonds in proteins, tensegrity balance ("closure") is required over the entire length of the polypeptide chain that defines individually folding units in globular proteins ("domains") as well as within the repeating elements in fibrous proteins that consist of extended chain structures. There is no closure to be found in extended structures that do not have repeating elements. This suggests an explanation as to why globular domains, as well as the repeat units in fibrous proteins, have to have a defined number of residues. Apart from networks of sidechain-sidechain hydrogen bonds there are certain key points at which this closure is achieved in the sidechain-backbone hydrogen bonds and these are associated with demarcation points at the start or end of stretches of secondary structure. Together, these three categories of hydrogen bond achieve the closure that is necessary for the stability of globular protein domains as well as repeating elements in fibrous proteins.

  10. Tensegrity: the architectural basis of cellular mechanotransduction

    NASA Technical Reports Server (NTRS)

    Ingber, D. E.

    1997-01-01

    Physical forces of gravity, hemodynamic stresses, and movement play a critical role in tissue development. Yet, little is known about how cells convert these mechanical signals into a chemical response. This review attempts to place the potential molecular mediators of mechanotransduction (e.g. stretch-sensitive ion channels, signaling molecules, cytoskeleton, integrins) within the context of the structural complexity of living cells. The model presented relies on recent experimental findings, which suggests that cells use tensegrity architecture for their organization. Tensegrity predicts that cells are hard-wired to respond immediately to mechanical stresses transmitted over cell surface receptors that physically couple the cytoskeleton to extracellular matrix (e.g. integrins) or to other cells (cadherins, selectins, CAMs). Many signal transducing molecules that are activated by cell binding to growth factors and extracellular matrix associate with cytoskeletal scaffolds within focal adhesion complexes. Mechanical signals, therefore, may be integrated with other environmental signals and transduced into a biochemical response through force-dependent changes in scaffold geometry or molecular mechanics. Tensegrity also provides a mechanism to focus mechanical energy on molecular transducers and to orchestrate and tune the cellular response.

  11. Biomechanics and Biotensegrity: Study Method and Frequency Response of the Simplex and 3-bar-SVD Tensegrity Configurations

    NASA Astrophysics Data System (ADS)

    Castro Arenas, C.; Ghersi, I.; Miralles, M. T.

    2016-04-01

    The purpose of this work is to study the frequency response of 3D tensegrity structures. These are structures that have been used, since the 80’s, to model biological systems of different scales. This fact led to the origin of the field of biotensegrity, which includes biomechanics as a natural field of application. In this work: a) A simple method for the analysis of frequency response of different nodes in 3D tensegrity structures was set up and tuned. This method is based on a video-analysis algorithm, which was applied to the structures, as they were vibrated along their axis of symmetry, at frequencies from 1 Hz to 60 Hz. b) Frequency-response analyses were performed, for the simplest 3D structure, the Simplex module, as well as for two towers, formed by stacking two and three Simplex modules, respectively. Resonant frequencies were detected for the Simplex module at (19.2±0.1) Hz and (50.2±0.1) Hz (the latter being an average of frequencies between homologous nodes). For the towers with two and three modules, each selected node presented a characteristic frequency response, modulated by their spatial placement in each model. Resonances for the two-stage tower were found at: (12±0.1) Hz; (16.2±0.1) Hz; (29.4±0.1) Hz and (37.2±0.1) Hz. For the tower with three Simplex modules, the main resonant frequencies were found at (12.0±0.1) Hz and (21.0±0.1) Hz. Results show that the proposed method is adequate for the study (2D) of any 3D tensegrity structure, with the potential of being generalized to the study of oscillations in three dimensions. A growing complexity and variability in the frequency response of the nodes was observed, as modules were added to the structures. These findings were compared to those found in the available literature.

  12. Tensegrity II. How structural networks influence cellular information processing networks

    NASA Technical Reports Server (NTRS)

    Ingber, Donald E.

    2003-01-01

    The major challenge in biology today is biocomplexity: the need to explain how cell and tissue behaviors emerge from collective interactions within complex molecular networks. Part I of this two-part article, described a mechanical model of cell structure based on tensegrity architecture that explains how the mechanical behavior of the cell emerges from physical interactions among the different molecular filament systems that form the cytoskeleton. Recent work shows that the cytoskeleton also orients much of the cell's metabolic and signal transduction machinery and that mechanical distortion of cells and the cytoskeleton through cell surface integrin receptors can profoundly affect cell behavior. In particular, gradual variations in this single physical control parameter (cell shape distortion) can switch cells between distinct gene programs (e.g. growth, differentiation and apoptosis), and this process can be viewed as a biological phase transition. Part II of this article covers how combined use of tensegrity and solid-state mechanochemistry by cells may mediate mechanotransduction and facilitate integration of chemical and physical signals that are responsible for control of cell behavior. In addition, it examines how cell structural networks affect gene and protein signaling networks to produce characteristic phenotypes and cell fate transitions during tissue development.

  13. State Estimation for Tensegrity Robots

    NASA Technical Reports Server (NTRS)

    Caluwaerts, Ken; Bruce, Jonathan; Friesen, Jeffrey M.; Sunspiral, Vytas

    2016-01-01

    Tensegrity robots are a class of compliant robots that have many desirable traits when designing mass efficient systems that must interact with uncertain environments. Various promising control approaches have been proposed for tensegrity systems in simulation. Unfortunately, state estimation methods for tensegrity robots have not yet been thoroughly studied. In this paper, we present the design and evaluation of a state estimator for tensegrity robots. This state estimator will enable existing and future control algorithms to transfer from simulation to hardware. Our approach is based on the unscented Kalman filter (UKF) and combines inertial measurements, ultra wideband time-of-flight ranging measurements, and actuator state information. We evaluate the effectiveness of our method on the SUPERball, a tensegrity based planetary exploration robotic prototype. In particular, we conduct tests for evaluating both the robot's success in estimating global position in relation to fixed ranging base stations during rolling maneuvers as well as local behavior due to small-amplitude deformations induced by cable actuation.

  14. Scientific Toy

    NASA Technical Reports Server (NTRS)

    1989-01-01

    Tensegritoy, inspired by the tensegrity concepts of R. Buckminster Fuller, is an erector set like toy designed to give students an understanding of structural stability. It is used by children, architects, engineers, and teachers. The manufacturer, Tensegrity Systems Corporation, also offers a collapsible point of purchase display which incorporates technology developed for space station trusses described in "NASA Tech Briefs." The tech brief described deployable trusses that can be collapsed into small packages for space shuttle transport, then unfolded in space. As a result, the display occupies a minimum amount of floor space, freight cost savings are substantial and assembly can be completed quickly.

  15. Smart Metamaterial Based on the Simplex Tensegrity Pattern.

    PubMed

    Al Sabouni-Zawadzka, Anna; Gilewski, Wojciech

    2018-04-26

    In the present paper, a novel cellular metamaterial that was based on a tensegrity pattern is presented. The material is constructed from supercells, each of which consists of eight 4-strut simplex modules. The proposed metamaterial exhibits some unusual properties, which are typical for smart structures. It is possible to control its mechanical characteristics by adjusting the level of self-stress or by changing the properties of structural members. A continuum model is used to identify the qualitative properties of the considered metamaterial, and to estimate how the applied self-stress and the characteristics of cables and struts affect the whole structure. The performed analyses proved that the proposed structure can be regarded as a smart metamaterial with orthotropic properties. One of its most important features are unique values of Poisson’s ratio, which can be either positive or negative, depending on the applied control parameters. Moreover, all of the mechanical characteristics of the proposed metamaterial are prone to structural control.

  16. The origin of cellular life.

    PubMed

    Ingber, D E

    2000-12-01

    This essay presents a scenario of the origin of life that is based on analysis of biological architecture and mechanical design at the microstructural level. My thesis is that the same architectural and energetic constraints that shape cells today also guided the evolution of the first cells and that the molecular scaffolds that support solid-phase biochemistry in modern cells represent living microfossils of past life forms. This concept emerged from the discovery that cells mechanically stabilize themselves using tensegrity architecture and that these same building rules guide hierarchical self-assembly at all size scales (Sci. Amer 278:48-57;1998). When combined with other fundamental design principles (e.g., energy minimization, topological constraints, structural hierarchies, autocatalytic sets, solid-state biochemistry), tensegrity provides a physical basis to explain how atomic and molecular elements progressively self-assembled to create hierarchical structures with increasingly complex functions, including living cells that can self-reproduce.

  17. The origin of cellular life

    NASA Technical Reports Server (NTRS)

    Ingber, D. E.

    2000-01-01

    This essay presents a scenario of the origin of life that is based on analysis of biological architecture and mechanical design at the microstructural level. My thesis is that the same architectural and energetic constraints that shape cells today also guided the evolution of the first cells and that the molecular scaffolds that support solid-phase biochemistry in modern cells represent living microfossils of past life forms. This concept emerged from the discovery that cells mechanically stabilize themselves using tensegrity architecture and that these same building rules guide hierarchical self-assembly at all size scales (Sci. Amer 278:48-57;1998). When combined with other fundamental design principles (e.g., energy minimization, topological constraints, structural hierarchies, autocatalytic sets, solid-state biochemistry), tensegrity provides a physical basis to explain how atomic and molecular elements progressively self-assembled to create hierarchical structures with increasingly complex functions, including living cells that can self-reproduce.

  18. Tensegrity, cellular biophysics, and the mechanics of living systems

    PubMed Central

    Ingber, Donald E.; Wang, Ning; Stamenović, Dimitrije

    2014-01-01

    The recent convergence between physics and biology has led many physicists to enter the fields of cell and developmental biology. One of the most exciting areas of interest has been the emerging field of mechanobiology that centers on how cells control their mechanical properties, and how physical forces regulate cellular biochemical responses, a process that is known as mechanotransduction. In this article, we review the central role that tensegrity (tensional integrity) architecture, which depends on tensile prestress for its mechanical stability, plays in biology. We describe how tensional prestress is a critical governor of cell mechanics and function, and how use of tensegrity by cells contributes to mechanotransduction. Theoretical tensegrity models are also described that predict both quantitative and qualitative behaviors of living cells, and these theoretical descriptions are placed in context of other physical models of the cell. In addition, we describe how tensegrity is used at multiple size scales in the hierarchy of life — from individual molecules to whole living organisms — to both stabilize three-dimensional form and to channel forces from the macroscale to the nanoscale, thereby facilitating mechanochemical conversion at the molecular level. PMID:24695087

  19. Parallel kinematic mechanisms for distributed actuation of future structures

    NASA Astrophysics Data System (ADS)

    Lai, G.; Plummer, A. R.; Cleaver, D. J.; Zhou, H.

    2016-09-01

    Future machines will require distributed actuation integrated with load-bearing structures, so that they are lighter, move faster, use less energy, and are more adaptable. Good examples are shape-changing aircraft wings which can adapt precisely to the ideal aerodynamic form for current flying conditions, and light but powerful robotic manipulators which can interact safely with human co-workers. A 'tensegrity structure' is a good candidate for this application due to its potentially excellent stiffness and strength-to-weight ratio and a multi-element structure into which actuators could be embedded. This paper presents results of an analysis of an example practical actuated tensegrity structure consisting of 3 ‘unit cells’. A numerical method is used to determine the stability of the structure with varying actuator length, showing how four actuators can be used to control movement in three degrees of freedom as well as simultaneously maintaining the structural pre-load. An experimental prototype has been built, in which 4 pneumatic artificial muscles (PAMs) are embedded in one unit cell. The PAMs are controlled antagonistically, by high speed switching of on-off valves, to achieve control of position and structure pre-load. Experimental and simulation results are presented, and future prospects for the approach are discussed.

  20. The Application of Tensegrity Massage in a Professionally Active Musician - Case Report.

    PubMed

    Wilk, Iwona; Kurpas, Donata; Andrzejewski, Waldemar; Okręglicka-Forysiak, Ewa; Gworys, Bohdan; Kassolik, Krzysztof

    2016-01-01

    The purpose of our study was to present options for the application of tensegrity massage to manage pain caused by the overload of soft tissues in musicians. Tensegrity massage was applied to a 34-year-old male violinist. The methodology included a correct positioning and tensegrity massage with individually designed procedure. After therapy, the patient achieved complete pain relief, and relaxation of muscles in the shoulder girdle and free part of the upper arm. The analgesic effect lasted for 6 months after the end of therapy. Massage is an effective method in eliminating pain caused by the overload of soft tissues. If used regularly before physical effort, it can prevent muscle overload. The presented massage procedure is an effective therapy in pain caused by the overload of soft tissues in musicians and it can be one of the elements of complex physiotherapy in active musicians. © 2014 Association of Rehabilitation Nurses.

  1. Application of Tensegrity Massage to Relive Complications After Mastectomy--Case Report.

    PubMed

    Wilk, Iwona; Kurpas, Donata; Mroczek, Bozena; Andrzejewski, Waldemar; Okręglicka-Forysiak, Ewa; Krawiecka-Jaworska, Ewa; Kassolik, Krzysztof

    2015-01-01

    The case study was to determine the effectiveness of tensegrity massage in a patient after mastectomy. Tensegrity massage was performed in a 50-year-old woman after mastectomy. The purpose of the massage was to normalize the tension of musculo-ligamento-fascial system in the chest, shoulder girdle, and back. The patient was subjected to a series of six massage sessions, 45 minutes each, twice a week. The applied massage therapy contributed to the reduction of the postoperative scar tenderness and painfulness, to the relaxation of the muscular tone within the shoulder girdle, and to the improvement of the patient's general feeling. Tensegrity massage is an effective therapy in the elimination of pain and abnormal tissue tension induced by extensive scarring after mastectomy. The presented massage procedure had a positive effect immediately after the therapy and after 1-month follow-up. © 2014 Association of Rehabilitation Nurses.

  2. Mechanical forces as information: an integrated approach to plant and animal development

    PubMed Central

    Hernández-Hernández, Valeria; Rueda, Denisse; Caballero, Lorena; Alvarez-Buylla, Elena R.; Benítez, Mariana

    2014-01-01

    Mechanical forces such as tension and compression act throughout growth and development of multicellular organisms. These forces not only affect the size and shape of the cells and tissues but are capable of modifying the expression of genes and the localization of molecular components within the cell, in the plasma membrane, and in the plant cell wall. The magnitude and direction of these physical forces change with cellular and tissue properties such as elasticity. Thus, mechanical forces and the mesoscopic fields that emerge from their local action constitute important sources of positional information. Moreover, physical and biochemical processes interact in non-linear ways during tissue and organ growth in plants and animals. In this review we discuss how such mechanical forces are generated, transmitted, and sensed in these two lineages of multicellular organisms to yield long-range positional information. In order to do so we first outline a potentially common basis for studying patterning and mechanosensing that relies on the structural principle of tensegrity, and discuss how tensegral structures might arise in plants and animals. We then provide some examples of morphogenesis in which mechanical forces appear to act as positional information during development, offering a possible explanation for ubiquitous processes, such as the formation of periodic structures. Such examples, we argue, can be interpreted in terms of tensegral phenomena. Finally, we discuss the hypothesis of mechanically isotropic points as a potentially generic mechanism for the localization and maintenance of stem-cell niches in multicellular organisms. This comparative approach aims to help uncovering generic mechanisms of morphogenesis and thus reach a better understanding of the evolution and development of multicellular phenotypes, focusing on the role of physical forces in these processes. PMID:24959170

  3. Mechanical forces as information: an integrated approach to plant and animal development.

    PubMed

    Hernández-Hernández, Valeria; Rueda, Denisse; Caballero, Lorena; Alvarez-Buylla, Elena R; Benítez, Mariana

    2014-01-01

    Mechanical forces such as tension and compression act throughout growth and development of multicellular organisms. These forces not only affect the size and shape of the cells and tissues but are capable of modifying the expression of genes and the localization of molecular components within the cell, in the plasma membrane, and in the plant cell wall. The magnitude and direction of these physical forces change with cellular and tissue properties such as elasticity. Thus, mechanical forces and the mesoscopic fields that emerge from their local action constitute important sources of positional information. Moreover, physical and biochemical processes interact in non-linear ways during tissue and organ growth in plants and animals. In this review we discuss how such mechanical forces are generated, transmitted, and sensed in these two lineages of multicellular organisms to yield long-range positional information. In order to do so we first outline a potentially common basis for studying patterning and mechanosensing that relies on the structural principle of tensegrity, and discuss how tensegral structures might arise in plants and animals. We then provide some examples of morphogenesis in which mechanical forces appear to act as positional information during development, offering a possible explanation for ubiquitous processes, such as the formation of periodic structures. Such examples, we argue, can be interpreted in terms of tensegral phenomena. Finally, we discuss the hypothesis of mechanically isotropic points as a potentially generic mechanism for the localization and maintenance of stem-cell niches in multicellular organisms. This comparative approach aims to help uncovering generic mechanisms of morphogenesis and thus reach a better understanding of the evolution and development of multicellular phenotypes, focusing on the role of physical forces in these processes.

  4. The effect of a single massage based on the tensegrity principle on postural stability in young women.

    PubMed

    Cieślik, Błażej; Podsiadły, Ireneusz; Kuczyński, Michał; Ostrowska, Bożena

    2017-11-06

    The aim of this study was to investigate the effects of normalized muscle tension via tensegrity-based massage on postural stability in a sample of female young adults. Nineteen females aged 21.8 ± 1.9 years were recruited presenting abnormal tension at muscles adhering to any of the following structural sites: superior iliac spine, lateral sacropelvic surface, linea aspera at 1/2 of femur length, and superior nuchal line of the occiput. Balance and postural control were assessed during bipedal stance using a force platform in multiple conditions: hard surface or soft foam surface with the head in either a neutral posture or tilted backward. Baseline and 3-min and 15-min post-treatment measures were collected while barefoot and eyes closed. Main outcomes measures included center of pressure variability, range, radius, and velocity in the anteroposterior (AP) mediolateral (ML) dimensions. In the solid surface with neutral head posture condition only AP COP measures decreased significantly (p< 0.05). In the soft surface condition, significant differences were observed in the AP and ML dimensions among most measures (p< 0.05). A single application of tensegrity-based massage positively influenced postural control in young adult females, particularly in the AP direction.

  5. 2016 Summer Series - Vytas SunSpiral - SUPERBall: A Biologically Inspired Robot for Planetary Exploration

    NASA Image and Video Library

    2016-06-14

    Nature is a major source of inspiration for robotics and aerospace engineering, giving rise to biologically inspired structures. Tensegrity robots mimic a structure similar to muscles and bones to produce a robust three-dimensional skeletal structure that is able to adapt. Vytas SunSpiral will present his work on biologically inspired robotics for advancing NASA space exploration missions.

  6. A microstructural approach to cytoskeletal mechanics based on tensegrity

    NASA Technical Reports Server (NTRS)

    Stamenovic, D.; Fredberg, J. J.; Wang, N.; Butler, J. P.; Ingber, D. E.

    1996-01-01

    Mechanical properties of living cells are commonly described in terms of the laws of continuum mechanics. The purpose of this report is to consider the implications of an alternative approach that emphasizes the discrete nature of stress bearing elements in the cell and is based on the known structural properties of the cytoskeleton. We have noted previously that tensegrity architecture seems to capture essential qualitative features of cytoskeletal shape distortion in adherent cells (Ingber, 1993a; Wang et al., 1993). Here we extend those qualitative notions into a formal microstructural analysis. On the basis of that analysis we attempt to identify unifying principles that might underlie the shape stability of the cytoskeleton. For simplicity, we focus on a tensegrity structure containing six rigid struts interconnected by 24 linearly elastic cables. Cables carry initial tension ("prestress") counterbalanced by compression of struts. Two cases of interconnectedness between cables and struts are considered: one where they are connected by pin-joints, and the other where the cables run through frictionless loops at the junctions. At the molecular level, the pinned structure may represent the case in which different cytoskeletal filaments are cross-linked whereas the looped structure represents the case where they are free to slip past one another. The system is then subjected to uniaxial stretching. Using the principal of virtual work, stretching force vs. extension and structural stiffness vs. stretching force relationships are calculated for different prestresses. The stiffness is found to increase with increasing prestress and, at a given prestress, to increase approximately linearly with increasing stretching force. This behavior is consistent with observations in living endothelial cells exposed to shear stresses (Wang & Ingber, 1994). At a given prestress, the pinned structure is found to be stiffer than the looped one, a result consistent with data on mechanical behavior of isolated, cross-linked and uncross-linked actin networks (Wachsstock et al., 1993). On the basis of our analysis we concluded that architecture and the prestress of the cytoskeleton might be key features that underlie a cell's ability to regulate its shape.

  7. Mandibular anterior crowding: normal or pathological?

    PubMed

    Consolaro, Alberto; Cardoso, Mauricio de Almeida

    2018-01-01

    The teeth become very close to each other when they are crowded, but their structures remain individualized and, in this situation, the role of the epithelial rests of Malassez is fundamental to release the EGF. The concept of tensegrity is fundamental to understand the responses of tissues submitted to forces in body movements, including teeth and their stability in this process. The factors of tooth position stability in the arch - or dental tensegrity - should be considered when one plans and perform an orthodontic treatment. The direct causes of the mandibular anterior crowding are decisive to decide about the correct retainer indication: Should they be applied and indicated throughout life? Should they really be permanently used for lifetime? These aspects of the mandibular anterior crowding and their implication at the orthodontic practice will be discussed here to induct reflections and insights for new researches, as well as advances in knowledge and technology on this subject.

  8. Adaptive and Resilient Soft Tensegrity Robots.

    PubMed

    Rieffel, John; Mouret, Jean-Baptiste

    2018-04-17

    Living organisms intertwine soft (e.g., muscle) and hard (e.g., bones) materials, giving them an intrinsic flexibility and resiliency often lacking in conventional rigid robots. The emerging field of soft robotics seeks to harness these same properties to create resilient machines. The nature of soft materials, however, presents considerable challenges to aspects of design, construction, and control-and up until now, the vast majority of gaits for soft robots have been hand-designed through empirical trial-and-error. This article describes an easy-to-assemble tensegrity-based soft robot capable of highly dynamic locomotive gaits and demonstrating structural and behavioral resilience in the face of physical damage. Enabling this is the use of a machine learning algorithm able to discover effective gaits with a minimal number of physical trials. These results lend further credence to soft-robotic approaches that seek to harness the interaction of complex material dynamics to generate a wealth of dynamical behaviors.

  9. Fibre cables in the lacunae of Typha leaves contribute to a tensegrity structure.

    PubMed

    Witztum, Allan; Wayne, Randy

    2014-04-01

    Cables composed of long, non-lignified fibre cells enclosed in a cover of much shorter thin-walled, crystal-containing cells traverse the air chambers (lacunae) in leaves of the taller species of Typha. The non-lignified fibre cables are anchored in diaphragms composed of stellate cells of aerenchyma tissue that segment the long air chambers into smaller compartments. Although the fibre cables are easily observed and can be pulled free from the porous-to-air diaphragms, their structure and function have been ignored or misinterpreted. Leaves of various species of Typha were dissected and fibre cables were pulled free and observed with a microscope using bright-field and polarizing optics. Maximal tensile strength of freshly removed cables was measured by hanging weights from fibre cables, and Instron analysis was used to produce curves of load versus extension until cables broke. Polarized light microscopy revealed that the cellulose microfibrils that make up the walls of the cable fibres are oriented parallel to the long axis of the fibres. This orientation ensures that the fibre cables are mechanically stiff and strong under tension. Accordingly, the measured stiffness and tensile strength of the fibre cables were in the gigapascal range. In combination with the dorsal and ventral leaf surfaces and partitions that contain lignified fibre bundles and vascular strands that are strong in compression, the very fine fibre cables that are strong under tension form a tensegrity structure. The tensegrity structure creates multiple load paths through which stresses are redistributed throughout the 1-3 m tall upright leaves of Typha angustifolia, T. latifolia, T. × glauca, T. domingensis and T. shuttleworthii. The length of the fibre cables relative to the length of the leaf blades is reduced in the last-formed leaves of flowering individuals. Fibre cables are absent in the shorter leaves of Typha minima and, if present, only extend for a few centimetres from the sheath into the leaf blade of Typha laxmannii. The advantage of the structure of the Typha leaf blade, which enables stiffness to give way to flexibility under windy conditions, is discussed for both vegetative and flowering plants.

  10. Fibre cables in the lacunae of Typha leaves contribute to a tensegrity structure

    PubMed Central

    Witztum, Allan; Wayne, Randy

    2014-01-01

    Background and Aims Cables composed of long, non-lignified fibre cells enclosed in a cover of much shorter thin-walled, crystal-containing cells traverse the air chambers (lacunae) in leaves of the taller species of Typha. The non-lignified fibre cables are anchored in diaphragms composed of stellate cells of aerenchyma tissue that segment the long air chambers into smaller compartments. Although the fibre cables are easily observed and can be pulled free from the porous-to-air diaphragms, their structure and function have been ignored or misinterpreted. Methods Leaves of various species of Typha were dissected and fibre cables were pulled free and observed with a microscope using bright-field and polarizing optics. Maximal tensile strength of freshly removed cables was measured by hanging weights from fibre cables, and Instron analysis was used to produce curves of load versus extension until cables broke. Key Results and Conclusions Polarized light microscopy revealed that the cellulose microfibrils that make up the walls of the cable fibres are oriented parallel to the long axis of the fibres. This orientation ensures that the fibre cables are mechanically stiff and strong under tension. Accordingly, the measured stiffness and tensile strength of the fibre cables were in the gigapascal range. In combination with the dorsal and ventral leaf surfaces and partitions that contain lignified fibre bundles and vascular strands that are strong in compression, the very fine fibre cables that are strong under tension form a tensegrity structure. The tensegrity structure creates multiple load paths through which stresses are redistributed throughout the 1–3 m tall upright leaves of Typha angustifolia, T. latifolia, T. × glauca, T. domingensis and T. shuttleworthii. The length of the fibre cables relative to the length of the leaf blades is reduced in the last-formed leaves of flowering individuals. Fibre cables are absent in the shorter leaves of Typha minima and, if present, only extend for a few centimetres from the sheath into the leaf blade of Typha laxmannii. The advantage of the structure of the Typha leaf blade, which enables stiffness to give way to flexibility under windy conditions, is discussed for both vegetative and flowering plants. PMID:24532647

  11. System Design and Locomotion of Superball, an Untethered Tensegrity Robot

    NASA Technical Reports Server (NTRS)

    Sabelhaus, Andrew P.; Bruce, Jonathan; Caluwaerts, Ken; Manovi, Pavlo; Firoozi, Roya Fallah; Dobi, Sarah; Agogino, Alice M.; Sunspiral, Vytas

    2015-01-01

    The Spherical Underactuated Planetary Exploration Robot ball (SUPERball) is an ongoing project within NASA Ames Research Center's Intelligent Robotics Group and the Dynamic Tensegrity Robotics Lab (DTRL). The current SUPERball is the first full prototype of this tensegrity robot platform, eventually destined for space exploration missions. This work, building on prior published discussions of individual components, presents the fully-constructed robot. Various design improvements are discussed, as well as testing results of the sensors and actuators that illustrate system performance. Basic low-level motor position controls are implemented and validated against sensor data, which show SUPERball to be uniquely suited for highly dynamic state trajectory tracking. Finally, SUPERball is shown in a simple example of locomotion. This implementation of a basic motion primitive shows SUPERball in untethered control.

  12. Systematic Image Based Optical Alignment and Tensegrity

    NASA Technical Reports Server (NTRS)

    Zeiders, Glenn W.; Montgomery, Edward E, IV (Technical Monitor)

    2001-01-01

    This presentation will review the objectives and current status of two Small Business Innovative Research being performed by the Sirius Group, under the direction of MSFC. They all relate to the development of advanced optical systems technologies for automated segmented mirror alignment techniques and fundamental design methodologies for ultralight structures. These are important to future astronomical missions in space.

  13. The effectiveness of massage based on the tensegrity principle compared with classical abdominal massage performed on patients with constipation.

    PubMed

    Kassolik, Krzysztof; Andrzejewski, Waldemar; Wilk, Iwona; Brzozowski, Marcin; Voyce, Kamila; Jaworska-Krawiecka, Ewa; Nowak, Barbara; Kurpas, Donata

    2015-01-01

    The purpose of the study was to compare the effectiveness of massage based on the tensegrity principle and classical abdominal massage performed on patients with constipation. The study group consisted of 29 subjects with a pre-existing diagnosis of constipation based on the Rome III criteria. The patients were divided into two groups: the first group was made up of 15 patients who underwent tensegrity massage (average age: 59.8 years), and the second was made up of 14 patients who were given classical abdominal massage (average age: 55.7 years). The study consisted of six massage sessions in both groups, with two sessions per week performed over 21 days. The assessment was based on a patient questionnaire, the Rome III questionnaire and a diary of bowel movements. The results were analyzed before therapy, after one week of therapy and after the third (final) week of therapy. Changes in the number of defecations were compared between the two groups; the biggest changes occurred in the first and third week of therapy (P<0.01, calculated by the Mann-Whitey test). As a result of the therapy, tension during defecation dropped from 60% to 20% in Group I, and from 42.8% to 35.7% in Group II. The influence of the applied therapy was evaluated positively by 80% of the tensegrity massage group and 29% of the classical abdominal massage group. Massage based on the tensegrity principle may have a greater positive influence on the quality and quantity of bowel movements than classical abdominal massage. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  14. Integrins, tensegrity, and mechanotransduction.

    PubMed

    Ingber, D E

    1997-06-01

    Physical forces, such as those due to gravity, play an important role in tissue development and remodeling. Yet, little is known about how individual cells sense mechanical signals or how they transduce them into a chemical response. Rather than listing the numerous signal pathways that have been found to be sensitive to mechanical stimulation, we need to place potential molecular signaling mechanisms within the context of the entire cell. The model presented is based on the concept that cells use tensegrity architecture to organize their cytoskeleton and stabilize their form. Studies with stick and string tensegrity cell models predict that living cells are hard-wired to respond immediately to external mechanical stresses. This hard-wiring exists in the form of discrete cytoskeletal filament networks that mechanically couple specific cell surface receptors, such as integrins, to nuclear matrix scaffolds and to potential transducing molecules that physically associate with the cytoskeleton. If these signaling molecules do function in a "solid-state", then mechanical stresses may be transduced into biochemical responses through force-dependent changes in cytoskeletal geometry or through local alterations in thermodynamic or kinetic parameters. Changes in cytoskeletal tension (prestress) also may play a role in signal amplification and adaptation. Recent experimental results are described which provide direct support for the tensegrity theory.

  15. Integrins, tensegrity, and mechanotransduction

    NASA Technical Reports Server (NTRS)

    Ingber, D. E.

    1997-01-01

    Physical forces, such as those due to gravity, play an important role in tissue development and remodeling. Yet, little is known about how individual cells sense mechanical signals or how they transduce them into a chemical response. Rather than listing the numerous signal pathways that have been found to be sensitive to mechanical stimulation, we need to place potential molecular signaling mechanisms within the context of the entire cell. The model presented is based on the concept that cells use tensegrity architecture to organize their cytoskeleton and stabilize their form. Studies with stick and string tensegrity cell models predict that living cells are hard-wired to respond immediately to external mechanical stresses. This hard-wiring exists in the form of discrete cytoskeletal filament networks that mechanically couple specific cell surface receptors, such as integrins, to nuclear matrix scaffolds and to potential transducing molecules that physically associate with the cytoskeleton. If these signaling molecules do function in a "solid-state", then mechanical stresses may be transduced into biochemical responses through force-dependent changes in cytoskeletal geometry or through local alterations in thermodynamic or kinetic parameters. Changes in cytoskeletal tension (prestress) also may play a role in signal amplification and adaptation. Recent experimental results are described which provide direct support for the tensegrity theory.

  16. On the mechanical modeling of tensegrity columns subject to impact loading

    NASA Astrophysics Data System (ADS)

    Amendola, Ada; Favata, Antonino; Micheletti, Andrea

    2018-04-01

    A physical model of a tensegrity columns is additively manufactured in a titanium alloy. After removing sacrificial supports, such a model is post-tensioned through suitable insertion of Spectra cables. The wave dynamics of the examined system is first experimentally investigated by recording the motion through high-speed cameras assisted by a digital image correlation algorithm, which returns time-histories of the axial displacements of the bases of each prism of the column. Next, the experimental response is mechanically simulated by means of two different models: a stick-and-spring model accounting for the presence of bending-stiff connections between the 3D-printed elements (mixed bending-stretching response), and a tensegrity model accounting for a purely stretching response. The comparison of theory and experiment reveals that the presence of bending-stiff connections weakens the nonlinearity of the wave dynamics of the system. A stretching-dominated response instead supports highly compact solitary waves in the presence of small prestress and negligible bending stiffness of connections.

  17. [Human skull development and voice disorders].

    PubMed

    Piron, A; Roch, J B

    2006-01-01

    The hominisation of the skull comes with the bipedic posture, due to a network of muscular and aponevrotic forces applied to the cranio-facial skeleton. A brief sight of the morphogenetic origine and issues of these forces help to understand more clearly the postural statement of the larynx, his functions, and his many extrinsic biomechanical bounds; then further his most frequently dysfunctions. The larynx is surrounded by several effective systems of protection: active, activo-passive, passive. The architectural features of the components of the laryngeal system allows us to consider the laryngeal function as an auto-balanced system. All the forces engaged are auto-balanced in a continuum of tension. This lead us to the concept of tensegrity system, neologism coming from tensional integrity described by Buckminster Fuller. The laryngeal employement by extrinsic system is pathological in case of chronicity. Any osteopathic treatment, which aims to restore the losses of laryngeal mobility, has to release first the peripherical structures involved in the laryngeal defense, before normalising the larynx itself Finally, the larynx recovers his functions in a tensegrity system.

  18. Super Ball Bot - Structures for Planetary Landing and Exploration, NIAC Phase 2 Final Report

    NASA Technical Reports Server (NTRS)

    SunSpiral, Vytas; Agogino, Adrian; Atkinson, David

    2015-01-01

    Small, light-weight and low-cost missions will become increasingly important to NASA's exploration goals. Ideally teams of small, collapsible, light weight robots, will be conveniently packed during launch and would reliably separate and unpack at their destination. Such robots will allow rapid, reliable in-situ exploration of hazardous destination such as Titan, where imprecise terrain knowledge and unstable precipitation cycles make single-robot exploration problematic. Unfortunately landing lightweight conventional robots is difficult with current technology. Current robot designs are delicate, requiring a complex combination of devices such as parachutes, retrorockets and impact balloons to minimize impact forces and to place a robot in a proper orientation. Instead we are developing a radically different robot based on a "tensegrity" structure and built purely with tensile and compression elements. Such robots can be both a landing and a mobility platform allowing for dramatically simpler mission profile and reduced costs. These multi-purpose robots can be light-weight, compactly stored and deployed, absorb strong impacts, are redundant against single-point failures, can recover from different landing orientations and can provide surface mobility. These properties allow for unique mission profiles that can be carried out with low cost and high reliability and which minimizes the inefficient dependance on "use once and discard" mass associated with traditional landing systems. We believe tensegrity robot technology can play a critical role in future planetary exploration.

  19. Ultralightweight Space Deployable Primary Reflector Demonstrator

    NASA Technical Reports Server (NTRS)

    Montgomery, Edward E., IV; Zeiders, Glenn W.; Smith, W. Scott (Technical Monitor)

    2002-01-01

    A concept has been developed and analyzed and several generational prototypes built for a gossamer-class deployable truss for a mirror or reflector with many smaller precisely-figured solid elements attached will, for at least the next several decades, minimize the mass of a large primary mirror assembly while still providing the high image quality essential for planet-finding and cosmological astronomical missions. Primary mirror segments are mounted in turn on ultralightweight thermally-formed plastic panels that hold clusters of mirror segments in rigid arrays whose tip/tilt and piston would be corrected over the scale of the plastic panels by the control segments. Prototype panels developed under this program are 45 cm wide and fabricated from commercially available Kaplan sheets. A three-strut octahedral tensegrity is the basis for the overall support structure. Each fundamental is composed of two such octahedrons, rotated oppositely about a common triangular face. Adjacent modules are joined at the nodes of the upper and lower triangles to form a deployable structure that could be made arbitrarily large. A seven-module dowel-and-wire prototype has been constructed. Deployment techniques based on the use of collapsing toggled struts with diagonal tensional elements allows an assembly of tensegrities to be fully collapsed and redeployed. The prototype designs will be described and results of a test program for measuring strength and deformation will be presented.

  20. Obtaining information by dynamic (effortful) touching

    PubMed Central

    Turvey, M. T.; Carello, Claudia

    2011-01-01

    Dynamic touching is effortful touching. It entails deformation of muscles and fascia and activation of the embedded mechanoreceptors, as when an object is supported and moved by the body. It is realized as exploratory activities that can vary widely in spatial and temporal extents (a momentary heft, an extended walk). Research has revealed the potential of dynamic touching for obtaining non-visual information about the body (e.g. limb orientation), attachments to the body (e.g. an object's height and width) and the relation of the body both to attachments (e.g. hand's location on a grasped object) and surrounding surfaces (e.g. places and their distances). Invariants over the exploratory activity (e.g. moments of a wielded object's mass distribution) seem to ground this ‘information about’. The conception of a haptic medium as a nested tensegrity structure has been proposed to express the obtained information realized by myofascia deformation, by its invariants and transformations. The tensegrity proposal rationalizes the relative indifference of dynamic touch to the site of mechanical contact (hand, foot, torso or probe) and the overtness of exploratory activity. It also provides a framework for dynamic touching's fractal nature, and the finding that its degree of fractality may matter to its accomplishments. PMID:21969694

  1. A DNA Crystal Designed to Contain Two Molecules per Asymmetric Unit

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    T Wang; R Sha; J Birktoft

    2011-12-31

    We describe the self-assembly of a DNA crystal that contains two tensegrity triangle molecules per asymmetric unit. We have used X-ray crystallography to determine its crystal structure. In addition, we have demonstrated control over the colors of the crystals by attaching either Cy3 dye (pink) or Cy5 dye (blue-green) to the components of the crystal, yielding crystals of corresponding colors. Attaching the pair of dyes to the pair of molecules yields a purple crystal.

  2. Cytoskeletal Mechanics

    NASA Astrophysics Data System (ADS)

    Mofrad, Mohammad R. K.; Kamm, Roger D.

    2011-08-01

    1. Introduction and the biological basis for cell mechanics Mohammad R. K. Mofrad and Roger Kamm; 2. Experimental measurements of intracellular mechanics Paul Janmey and Christoph Schmidt; 3. The cytoskeleton as a soft glassy material Jeffrey Fredberg and Ben Fabry; 4. Continuum elastic or viscoelastic models for the cell Mohammad R. K. Mofrad, Helene Karcher and Roger Kamm; 5. Multiphasic models of cell mechanics Farshid Guuilak, Mansoor A. Haider, Lori A. Setton, Tod A. Laursen and Frank P. T. Baaijens; 6. Models of cytoskeletal mechanics based on tensegrity Dimitrije Stamenovic; 7. Cells, gels and mechanics Gerald H. Pollack; 8. Polymer-based models of cytoskeletal networks F. C. MacKintosh; 9. Cell dynamics and the actin cytoskeleton James L. McGrath and C. Forbes Dewey, Jr; 10. Active cellular motion: continuum theories and models Marc Herant and Micah Dembo; 11. Summary Mohammad R. K. Mofrad and Roger Kamm.

  3. Mechanisms governing the visco-elastic responses of living cells assessed by foam and tensegrity models.

    PubMed

    Cañadas, P; Laurent, V M; Chabrand, P; Isabey, D; Wendling-Mansuy, S

    2003-11-01

    The visco-elastic properties of living cells, measured to date by various authors, vary considerably, depending on the experimental methods and/or on the theoretical models used. In the present study, two mechanisms thought to be involved in cellular visco-elastic responses were analysed, based on the idea that the cytoskeleton plays a fundamental role in cellular mechanical responses. For this purpose, the predictions of an open unit-cell model and a 30-element visco-elastic tensegrity model were tested, taking into consideration similar properties of the constitutive F-actin. The quantitative predictions of the time constant and viscosity modulus obtained by both models were compared with previously published experimental data obtained from living cells. The small viscosity modulus values (10(0)-10(3) Pa x s) predicted by the tensegrity model may reflect the combined contributions of the spatially rearranged constitutive filaments and the internal tension to the overall cytoskeleton response to external loading. In contrast, the high viscosity modulus values (10(3)-10(5) Pa x s) predicted by the unit-cell model may rather reflect the mechanical response of the cytoskeleton to the bending of the constitutive filaments and/or to the deformation of internal components. The present results suggest the existence of a close link between the overall visco-elastic response of micromanipulated cells and the underlying architecture.

  4. Geometric confinement influences cellular mechanical properties I -- adhesion area dependence.

    PubMed

    Su, Judith; Jiang, Xingyu; Welsch, Roy; Whitesides, George M; So, Peter T C

    2007-06-01

    Interactions between the cell and the extracellular matrix regulate a variety of cellular properties and functions, including cellular rheology. In the present study of cellular adhesion, area was controlled by confining NIH 3T3 fibroblast cells to circular micropatterned islands of defined size. The shear moduli of cells adhering to islands of well defined geometry, as measured by magnetic microrheometry, was found to have a significantly lower variance than those of cells allowed to spread on unpatterned surfaces. We observe that the area of cellular adhesion influences shear modulus. Rheological measurements further indicate that cellular shear modulus is a biphasic function of cellular adhesion area with stiffness decreasing to a minimum value for intermediate areas of adhesion, and then increasing for cells on larger patterns. We propose a simple hypothesis: that the area of adhesion affects cellular rheological properties by regulating the structure of the actin cytoskeleton. To test this hypothesis, we quantified the volume fraction of polymerized actin in the cytosol by staining with fluorescent phalloidin and imaging using quantitative 3D microscopy. The polymerized actin volume fraction exhibited a similar biphasic dependence on adhesion area. Within the limits of our simplifying hypothesis, our experimental results permit an evaluation of the ability of established, micromechanical models to predict the cellular shear modulus based on polymerized actin volume fraction. We investigated the "tensegrity", "cellular-solids", and "biopolymer physics" models that have, respectively, a linear, quadratic, and 5/2 dependence on polymerized actin volume fraction. All three models predict that a biphasic trend in polymerized actin volume fraction as a function of adhesion area will result in a biphasic behavior in shear modulus. Our data favors a higher-order dependence on polymerized actin volume fraction. Increasingly better experimental agreement is observed for the tensegrity, the cellular solids, and the biopolymer models respectively. Alternatively if we postulate the existence of a critical actin volume fraction below which the shear modulus vanishes, the experimental data can be equivalently described by a model with an almost linear dependence on polymerized actin volume fraction; this observation supports a tensegrity model with a critical actin volume fraction.

  5. Lattice-free prediction of three-dimensional structure of programmed DNA assemblies

    PubMed Central

    Pan, Keyao; Kim, Do-Nyun; Zhang, Fei; Adendorff, Matthew R.; Yan, Hao; Bathe, Mark

    2014-01-01

    DNA can be programmed to self-assemble into high molecular weight 3D assemblies with precise nanometer-scale structural features. Although numerous sequence design strategies exist to realize these assemblies in solution, there is currently no computational framework to predict their 3D structures on the basis of programmed underlying multi-way junction topologies constrained by DNA duplexes. Here, we introduce such an approach and apply it to assemblies designed using the canonical immobile four-way junction. The procedure is used to predict the 3D structure of high molecular weight planar and spherical ring-like origami objects, a tile-based sheet-like ribbon, and a 3D crystalline tensegrity motif, in quantitative agreement with experiments. Our framework provides a new approach to predict programmed nucleic acid 3D structure on the basis of prescribed secondary structure motifs, with possible application to the design of such assemblies for use in biomolecular and materials science. PMID:25470497

  6. Preface of "The Second Symposium on Border Zones Between Experimental and Numerical Application Including Solution Approaches By Extensions of Standard Numerical Methods"

    NASA Astrophysics Data System (ADS)

    Ortleb, Sigrun; Seidel, Christian

    2017-07-01

    In this second symposium at the limits of experimental and numerical methods, recent research is presented on practically relevant problems. Presentations discuss experimental investigation as well as numerical methods with a strong focus on application. In addition, problems are identified which require a hybrid experimental-numerical approach. Topics include fast explicit diffusion applied to a geothermal energy storage tank, noise in experimental measurements of electrical quantities, thermal fluid structure interaction, tensegrity structures, experimental and numerical methods for Chladni figures, optimized construction of hydroelectric power stations, experimental and numerical limits in the investigation of rain-wind induced vibrations as well as the application of exponential integrators in a domain-based IMEX setting.

  7. A polyhedron made of tRNAs.

    PubMed

    Severcan, Isil; Geary, Cody; Chworos, Arkadiusz; Voss, Neil; Jacovetty, Erica; Jaeger, Luc

    2010-09-01

    Supramolecular assembly is a powerful strategy used by nature to build nanoscale architectures with predefined sizes and shapes. With synthetic systems, however, numerous challenges remain to be solved before precise control over the synthesis, folding and assembly of rationally designed three-dimensional nano-objects made of RNA can be achieved. Here, using the transfer RNA molecule as a structural building block, we report the design, efficient synthesis and structural characterization of stable, modular three-dimensional particles adopting the polyhedral geometry of a non-uniform square antiprism. The spatial control within the final architecture allows the precise positioning and encapsulation of proteins. This work demonstrates that a remarkable degree of structural control can be achieved with RNA structural motifs for the construction of thermostable three-dimensional nano-architectures that do not rely on helix bundles or tensegrity. RNA three-dimensional particles could potentially be used as carriers or scaffolds in nanomedicine and synthetic biology.

  8. A polyhedron made of tRNAs

    PubMed Central

    Severcan, Isil; Geary, Cody; Chworos, Arkadiusz; Voss, Neil; Jacovetty, Erica; Jaeger, Luc

    2010-01-01

    Supra-molecular assembly is a powerful strategy used by nature for building nano-scale architectures with predefined sizes and shapes. Numerous challenges remain however to be solved in order to demonstrate precise control over the synthesis, folding and assembly of rationally designed three-dimensional (3D) nano-objects made of RNA. Using the transfer RNA molecule as a structural building block, we report the design, efficient synthesis and structural characterization of stable, modular 3D particles adopting the polyhedral geometry of a non-uniform square antiprism. The spatial control within the final architecture allows precise positioning and encapsulation of proteins. This work demonstrates that a remarkable degree of structural control can be achieved with RNA structural motifs to build thermostable 3D nano-architectures that do not rely on helix bundles or tensegrity. RNA 3D particles can potentially be used as carriers or scaffolds in nano-medicine and synthetic biology. PMID:20729899

  9. How cells (might) sense microgravity

    NASA Technical Reports Server (NTRS)

    Ingber, D.

    1999-01-01

    This article is a summary of a lecture presented at an ESA/NASA Workshop on Cell and Molecular Biology Research in Space that convened in Leuven, Belgium, in June 1998. Recent studies are reviewed which suggest that cells may sense mechanical stresses, including those due to gravity, through changes in the balance of forces that are transmitted across transmembrane adhesion receptors that link the cytoskeleton to the extracellular matrix and to other cells (e.g., integrins, cadherins, selectins). The mechanism by which these mechanical signals are transduced and converted into a biochemical response appears to be based, in part, on the finding that living cells use a tension-dependent form of architecture, known as tensegrity, to organize and stabilize their cytoskeleton. Because of tensegrity, the cellular response to stress differs depending on the level of pre-stress (pre-existing tension) in the cytoskeleton and it involves all three cytoskeletal filament systems as well as nuclear scaffolds. Recent studies confirm that alterations in the cellular force balance can influence intracellular biochemistry within focal adhesion complexes that form at the site of integrin binding as well as gene expression in the nucleus. These results suggest that gravity sensation may not result from direct activation of any single gravioreceptor molecule. Instead, gravitational forces may be experienced by individual cells in the living organism as a result of stress-dependent changes in cell, tissue, or organ structure that, in turn, alter extracellular matrix mechanics, cell shape, cytoskeletal organization, or internal pre-stress in the cell-tissue matrix.--Ingber, D. How cells (might) sense microgravity.

  10. Self-Assembly of 3D DNA Crystals Containing a Torsionally Stressed Component

    DOE PAGES

    Hernandez, Carina; Birktoft, Jens J.; Ohayon, Yoel P.; ...

    2017-10-05

    There is an increasing appreciation for structural diversity of DNA that is of interest to both DNA nanotechnology and basic biology. Here, we have explored how DNA responds to torsional stress by building on a previously reported two-turn DNA tensegrity triangle and demonstrating that we could introduce an extra nucleotide pair (np) into the original sequence without affecting assembly and crystallization. The extra np imposes a significant torsional stress, which is accommodated by global changes throughout the B-DNA duplex and the DNA lattice. Furthermore, the work reveals a near-atomic structure of naked DNA under a torsional stress of approximately 14%,more » and thus provides an example of DNA distortions that occur without a requirement for either an external energy source or the free energy available from protein or drug binding.« less

  11. Morphological communication: exploiting coupled dynamics in a complex mechanical structure to achieve locomotion

    PubMed Central

    Rieffel, John A.; Valero-Cuevas, Francisco J.; Lipson, Hod

    2010-01-01

    Traditional engineering approaches strive to avoid, or actively suppress, nonlinear dynamic coupling among components. Biological systems, in contrast, are often rife with these dynamics. Could there be, in some cases, a benefit to high degrees of dynamical coupling? Here we present a distributed robotic control scheme inspired by the biological phenomenon of tensegrity-based mechanotransduction. This emergence of morphology-as-information-conduit or ‘morphological communication’, enabled by time-sensitive spiking neural networks, presents a new paradigm for the decentralized control of large, coupled, modular systems. These results significantly bolster, both in magnitude and in form, the idea of morphological computation in robotic control. Furthermore, they lend further credence to ideas of embodied anatomical computation in biological systems, on scales ranging from cellular structures up to the tendinous networks of the human hand. PMID:19776146

  12. Self-Assembly of 3D DNA Crystals Containing a Torsionally Stressed Component.

    PubMed

    Hernandez, Carina; Birktoft, Jens J; Ohayon, Yoel P; Chandrasekaran, Arun Richard; Abdallah, Hatem; Sha, Ruojie; Stojanoff, Vivian; Mao, Chengde; Seeman, Nadrian C

    2017-11-16

    There is an increasing appreciation for structural diversity of DNA that is of interest to both DNA nanotechnology and basic biology. Here, we have explored how DNA responds to torsional stress by building on a previously reported two-turn DNA tensegrity triangle and demonstrating that we could introduce an extra nucleotide pair (np) into the original sequence without affecting assembly and crystallization. The extra np imposes a significant torsional stress, which is accommodated by global changes throughout the B-DNA duplex and the DNA lattice. The work reveals a near-atomic structure of naked DNA under a torsional stress of approximately 14%, and thus provides an example of DNA distortions that occur without a requirement for either an external energy source or the free energy available from protein or drug binding. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Self-Assembly of 3D DNA Crystals Containing a Torsionally Stressed Component

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hernandez, Carina; Birktoft, Jens J.; Ohayon, Yoel P.

    There is an increasing appreciation for structural diversity of DNA that is of interest to both DNA nanotechnology and basic biology. Here, we have explored how DNA responds to torsional stress by building on a previously reported two-turn DNA tensegrity triangle and demonstrating that we could introduce an extra nucleotide pair (np) into the original sequence without affecting assembly and crystallization. The extra np imposes a significant torsional stress, which is accommodated by global changes throughout the B-DNA duplex and the DNA lattice. Furthermore, the work reveals a near-atomic structure of naked DNA under a torsional stress of approximately 14%,more » and thus provides an example of DNA distortions that occur without a requirement for either an external energy source or the free energy available from protein or drug binding.« less

  14. Alternative Suspension System for Space Shuttle Avionics Shelf

    NASA Technical Reports Server (NTRS)

    Biele, Frank H., III

    2010-01-01

    Engineers working in the Aerospace field under deadlines and strict budgets often miss the opportunity to design something that is considered new or innovative, favoring instead to use the tried-and-true design over those that may, in fact, be more efficient. This thesis examines an electronic equipment stowage shelf suspended from a frame in the cargo bay (mid fuselage) of the United States Space Transportation System (STS), the Space Shuttle, and 3 alternative designs. Four different designs are examined and evaluated. The first design is a conventional truss, representing the tried and true approach. The second is a cable dome type structure consisting of struts and pre-stressed wiring. The third and fourth are double layer tensegrity systems consisting of contiguous struts of the order k=1 and k=2 respectively.

  15. Inter-trabecular angle: A parameter of trabecular bone architecture in the human proximal femur that reveals underlying topological motifs.

    PubMed

    Reznikov, Natalie; Chase, Hila; Ben Zvi, Yehonatan; Tarle, Victoria; Singer, Matthew; Brumfeld, Vlad; Shahar, Ron; Weiner, Steve

    2016-10-15

    Trabecular bone is an intricate 3D network of struts and plates. Although the structure-function relations in trabecular bone have been studied since the time of Julius Wolff, controversy still exists regarding the architectural parameters responsible for its stability and resilience. We present a parameter that measures the angle between two connected trabeculae - the Inter-Trabecular Angle (ITA). We studied the ITA values derived from μCT scans of different regions of the proximal femora of 5 individuals of different age and sex. We show that the ITA angle distribution of nodes with 3 connecting trabeculae has a mean close to 120°, nodes with 4 connecting trabeculae has a mean close to 109° and nodes of higher connectivity have mean ITA values around 100°. This tendency to spread the ITAs around geometrically symmetrical motifs is highly conserved. The implication is that the ITAs are optimized such that the smallest amount of material spans the maximal 3D volume, and possibly by so doing trabecular bone might be better adapted to multidirectional loading. We also draw a parallel between trabecular bone and tensegrity structures - where lightweight, resilient and stable tetrahedron-based shapes contribute to strain redistribution amongst all the elements and to collective impact dampening. The Inter-Trabecular Angle (ITA) is a new topological parameter of trabecular bone. The ITA characterizes the way trabeculae connect with each other at nodes, regardless of their thickness and shape. The mean ITA value of nodes with 3 trabeculae is close to 120°, of nodes with 4 trabeculae is just below 109°, and the mean ITA of nodes with 5 and more trabeculae is around 100°. Thus the connections of trabeculae trend towards adopting symmetrical shapes. This implies that trabeculae can maximally span 3D space using the minimal amount of material. We draw a parallel between this motif and the concept of tensegrity - an engineering premise to which many living creatures conform at multiple levels of organization. Copyright © 2016 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

  16. Spectacularly robust! Tensegrity principle explains the mechanical strength of the avian lung.

    PubMed

    Maina, J N

    2007-01-15

    Among the air-breathing vertebrates, the respiratory system of birds, the lung-air sac system, is remarkably complex and singularly efficient. The most perplexing structural property of the avian lung pertains to its exceptional mechanical strength, especially that of the minuscule terminal respiratory units, the air- and the blood capillaries. In different species of birds, the air capillaries range in diameter from 3 to 20 micro m: the blood capillaries are in all cases relatively smaller. Over and above their capacity to withstand enormous surface tension forces at the air-tissue interface, the air capillaries resist mechanical compression (parabronchial distending pressure) as high as 20 cm H(2)O (2 kPa). The blood capillaries tolerate a pulmonary arterial vascular pressure of 24.1 mmHg (3.2 kPa) and vascular resistance of 22.5 mmHg (3 kPa) without distending. The design of the avian respiratory system fundamentally stems from the rigidity (strength) of the lung. The gas exchanger (the lung) is uncoupled from the ventilator (the air sacs), allowing the lung (the paleopulmonic parabronchi) to be ventilated continuously and unidirectionally by synchronized bellows like action of the air sacs. Since during the ventilation of the lung the air capillaries do not have to be distended (dilated), i.e., surface tension force does not have to be overcome (as would be the case if the lung was compliant), extremely intense subdivision of the exchange tissue was possible. Minuscule terminal respiratory units developed, producing a vast respiratory surface area in a limited lung volume. I make a case that a firm (rigid) rib cage, a lung tightly held by the ribs and the horizontal septum, a lung directly attached to the trunk, specially formed and compactly arranged parabronchi, intertwined atrial muscles, and tightly set air capillaries and blood capillaries form an integrated hierarchy of discrete network system of tension and compression, a tensegrity (tensional integrity) array, which absorbs, transmits, and dissipates stress, stabilizing (strengthening) the lung and its various structural components.

  17. Time lapse microscopy of temperature control during self-assembly of 3D DNA crystals

    NASA Astrophysics Data System (ADS)

    Conn, Fiona W.; Jong, Michael Alexander; Tan, Andre; Tseng, Robert; Park, Eunice; Ohayon, Yoel P.; Sha, Ruojie; Mao, Chengde; Seeman, Nadrian C.

    2017-10-01

    DNA nanostructures are created by exploiting the high fidelity base-pairing interactions of double-stranded branched DNA molecules. These structures present a convenient medium for the self-assembly of macroscopic 3D crystals. In some self-assemblies in this system, crystals can be formed by lowering the temperature, and they can be dissolved by raising it. The ability to monitor the formation and melting of these crystals yields information that can be used to monitor crystal formation and growth. Here, we describe the development of an inexpensive tool that enables direct observation of the crystal growth process as a function of both time and temperature. Using the hanging-drop crystallization of the well-characterized 2-turn DNA tensegrity triangle motif for our model system, its response to temperature has been characterized visually.

  18. Microscopic and histochemical manifestations of hyaline cartilage dynamics.

    PubMed

    Malinin, G I; Malinin, T I

    1999-01-01

    Structure and function of hyaline cartilages has been the focus of many correlative studies for over a hundred years. Much of what is known regarding dynamics and function of cartilage constituents has been derived or inferred from biochemical and electron microscopic investigations. Here we show that in conjunction with ultrastructural, and high-magnification transmission light and polarization microscopy, the well-developed histochemical methods are indispensable for the analysis of cartilage dynamics. Microscopically demonstrable aspects of cartilage dynamics include, but are not limited to, formation of the intracellular liquid crystals, phase transitions of the extracellular matrix and tubular connections between chondrocytes. The role of the interchondrocytic liquid crystals is considered in terms of the tensegrity hypothesis and non-apoptotic cell death. Phase transitions of the extracellular matrix are discussed in terms of self-alignment of chondrons, matrix guidance pathways and cartilage growth in the absence of mitosis. The possible role of nonenzymatic glycation reactions in cartilage dynamics is also reviewed.

  19. Conception and development of the Second Life® Embryo Physics Course.

    PubMed

    Gordon, Richard

    2013-06-01

    The study of embryos with the tools and mindset of physics, started by Wilhelm His in the 1880s, has resumed after a hiatus of a century. The Embryo Physics Course convenes online allowing interested researchers and students, who are scattered around the world, to gather weekly in one place, the virtual world of Second Life®. It attracts people from a wide variety of disciplines and walks of life: applied mathematics, artificial life, bioengineering, biophysics, cancer biology, cellular automata, civil engineering, computer science, embryology, electrical engineering, evolution, finite element methods, history of biology, human genetics, mathematics, molecular developmental biology, molecular biology, nanotechnology, philosophy of biology, phycology, physics, self-reproducing systems, stem cells, tensegrity structures, theoretical biology, and tissue engineering. Now in its fifth year, the Embryo Physics Course provides a focus for research on the central question of how an embryo builds itself.

  20. 3D DNA Origami Crystals.

    PubMed

    Zhang, Tao; Hartl, Caroline; Frank, Kilian; Heuer-Jungemann, Amelie; Fischer, Stefan; Nickels, Philipp C; Nickel, Bert; Liedl, Tim

    2018-05-18

    3D crystals assembled entirely from DNA provide a route to design materials on a molecular level and to arrange guest particles in predefined lattices. This requires design schemes that provide high rigidity and sufficiently large open guest space. A DNA-origami-based "tensegrity triangle" structure that assembles into a 3D rhombohedral crystalline lattice with an open structure in which 90% of the volume is empty space is presented here. Site-specific placement of gold nanoparticles within the lattice demonstrates that these crystals are spacious enough to efficiently host 20 nm particles in a cavity size of 1.83 × 10 5 nm 3 , which would also suffice to accommodate ribosome-sized macromolecules. The accurate assembly of the DNA origami lattice itself, as well as the precise incorporation of gold particles, is validated by electron microscopy and small-angle X-ray scattering experiments. The results show that it is possible to create DNA building blocks that assemble into lattices with customized geometry. Site-specific hosting of nano objects in the optically transparent DNA lattice sets the stage for metamaterial and structural biology applications. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Simulated Microgravity Induced Cytoskeletal Rearrangements are Modulated by Protooncogenes

    NASA Technical Reports Server (NTRS)

    Melhado, C. D.; Sanford, G. L.; Bosah, F.; Harris-Hooker, S.

    1998-01-01

    Microgravity is the environment living systems encounter during space flight and gravitational unloading is the effect of this environment on living systems. The cell, being a multiphasic chemical system, is a useful starting point to study the potential impact of gravity unloading on physiological function. In the absence of gravity, sedimentation of organelles including chromosomes, mitochondria, nuclei, the Golgi apparatus, vacuoles, and the endoplasmic reticulum may be affected. Most of these organelles, however, are somewhat held in place by cytoskeleton. Hansen and Igber suggest that intermediate filaments act to stabilize the nuleus against rotational movement, and integrate cell and nuclear structure. The tensegrity theory supports the idea that mechanical or physical forces alters the cytoskeletal structures of a cell resulting in the changes in cell: matrix interactions and receptor-signaling coupling. This type of stress to the cytoskeleton may be largely responsible regulating cell shape, growth, movement and metabolism. Mouse MC3T3 El cells under microgravity exhibited significant cytoskeletal changes and alterations in cell growth. The alterations in cytoskeleton architecture may be due to changes in the expression of actin related proteins or integrins. Philopott and coworkers reported on changes in the distribution of microtubule and cytoskeleton elements in the cells of heart tissue from space flight rats and those centrifuged at 1.7g. Other researchers have showed that microgravity reduced EGF-induced c-fos and c-jun expression compared to 1 g controls. Since c-fos and c-jun are known regulators of cell growth, it is likely that altered signal transduction involving protooncogenes may play a crucial role in the reduced growth and alterations in cytoskeletal arrangements found during space flight. It is clear that a microgravity environment induces a number of changes in cell shape, cell surface molecules, gene expression, and cytoskeletal reorganization. However the underlying mechanism for these cellular changes have not been clearly defined. We examined alterations in endothelial migration, and cytoskeleton architecture (microfilamentous f-actin and vimentin-rich- intermediate filaments) following wounding under simulated microgravity. We also examined the possibility that altered signal transduction pathways, involving protooncogenes, may play a crucial role in microgravity-induced retardation of cell migration and alterations in cytoskeletal organization. We hypothesize that, based on the tensegrity theory, cytoskeletal organization respond to gravitational unloading and through this response, cell behavior, function and gene expression are modified.

  2. 13th Annual Conference on the Foundations of Nanoscience (FNANO 2016) Held in Snowbird Cliff Lodge, Snowbird, Utah, April 11-14, 2016

    DTIC Science & Technology

    2017-01-30

    Friedrich C . Simmel Salt and Temperature Dependence of Shape and Interhelical Spacing of DNA Origami Nanostructures Studied by Small Angle X-Ray Scattering...Nuclear Pore Complex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 Patrick D. Ellis, Qi Shen, Thomas J . Melia, C . Patrick...and C . Mao, “Tensegrity: Construction of rigid DNA triangles with flexible four-arm junctions,” J . Am. Chem. Soc., 126, 2324 (2004). [3] J . Zheng et

  3. Functionalizing Designer DNA Crystals

    NASA Astrophysics Data System (ADS)

    Chandrasekaran, Arun Richard

    Three-dimensional crystals have been self-assembled from a DNA tensegrity triangle via sticky end interaction. The tensegrity triangle is a rigid DNA motif containing three double helical edges connected pair-wise by three four-arm junctions. The symmetric triangle contains 3 unique strands combined in a 3:3:1 ratio: 3 crossover, 3 helical and 1 central. The length of the sticky end reported previously was two nucleotides (nt) (GA:TC) and the motif with 2-helical turns of DNA per edge diffracted to 4.9 A at beam line NSLS-X25 and to 4 A at beam line ID19 at APS. The purpose of these self-assembled DNA crystals is that they can be used as a framework for hosting external guests for use in crystallographic structure solving or the periodic positioning of molecules for nanoelectronics. This thesis describes strategies to improve the resolution and to incorporate guests into the 3D lattice. The first chapter describes the effect of varying sticky end lengths and the influence of 5'-phosphate addition on crystal formation and resolution. X-ray diffraction data from beam line NSLS-X25 revealed that the crystal resolution for 1-nt (G:C) sticky end was 3.4 A. Motifs with every possible combination of 1-nt and 2-nt sticky-ended phosphorylated strands were crystallized and X-ray data were collected. The position of the 5'-phosphate on either the crossover (strand 1), helical (strand 2), or central strand (3) had an impact on the resolution of the self-assembled crystals with the 1-nt 1P-2-3 system diffracting to 2.62 A at APS and 3.1 A at NSLS-X25. The second chapter describes the sequence-specific recognition of DNA motifs with triplex-forming oligonucleotides (TFOs). This study examined the feasibility of using TFOs to bind to specific locations within a 3-turn DNA tensegrity triangle motif. The TFO 5'-TTCTTTCTTCTCT was used to target the tensegrity motif containing an appropriately embedded oligopurine.oligopyrimidine binding site. As triplex formation involving cytidine nucleotides is usually pH dependent (pH < 6) four different TFOs were examined: TFO-1 was unmodified while TFOs 2-4 contained additional stabilizing analogues capable of extending triplex formation to pH 7. In addition, each of the TFOs contained a Cy5 dye at the 5'-end of the oligonucleotide to aid in characterization of TFO binding - crystals were obtained with all four variations of TFOs. Formation of DNA triplex in the motif was characterized by an electrophoretic mobility shift assay (EMSA), UV melting studies and FRET. Crystals containing TFO-1 (unmodified) and TFO-2 (with 2'-amino ethoxy modification) were isolated and flash-frozen in liquid nitrogen for X-ray data collection at beam line NSLS-X25. X-ray data was also collected for crystals of the 3-turn triangle without any TFO bound to it. Difference maps were done between the crystals with TFO against the one without to identify any additional electron density corresponding to the third strand in the triplex binding region. The data from the crystal containing TFO-2 was used to further analyze if the additional density can match the expected position of the TFO on the triangle motif. Since the additional density did not correspond to the entire binding region, 2Fo-Fc, 3Fo-2Fc and 4Fo-3Fc maps were done to check for missing pieces of the electron density. From the resulting 2Fo-Fc map, the asymmetric unit from the 3-turn triangle (31-bp duplex model based on previous structure 3UBI) was inserted into the density as a reference. However, the electron density corresponding to the TFO was still not continuous throughout the 13-nt triplex binding region and allowed only a partial fit of the TFO. The third nucleotide in positions 1, 3, 4, 6, 7 were fit into the density in the major groove of the underlying duplex with proper triplex configuration. The third chapter describes the triplex approach to position a functional group (the UV cross-linking agent psoralen) within a pre-formed DNA motif. Triplex formation and psoralen cross-linking of the motif were analyzed by native and denaturing gel electrophoresis respectively. Motifs containing the Psoralen-TFO were also successfully crystallized and the crosslinking shown by analyzing the denatured crystals on a gel. The end goal would be to form a crosslinked designed DNA crystal that can diffract to a higher resolution. The fourth chapter describes the use of serial femtosecond crystallography for structure determination of designed DNA lattices. X-ray diffraction data from self-assembled 3D DNA microcrystals were collected from a stream of crystals in solution. Serial femtosecond crystallography eliminates the need for large crystals and the need for freezing, thus overcoming any associated crystal defects and radiation damage. Self-assembled nano/microcrystals were successfully made and were diffracted at room temperature. The best diffraction was from the 1-nt SE motif to an extent of 3.5 A in resolution.

  4. Lightweight Multifunctional Planetary Probe for Extreme Environment Exploration and Locomotion

    NASA Technical Reports Server (NTRS)

    Bayandor, Javid (Principal Investigator); Schroeder, Kevin; Samareh, Jamshid

    2017-01-01

    The demand to explore new worlds requires the development of advanced technologies that enable landed science on uncertain terrains or in hard to reach locations. As a result, contemporary Entry, Descent, Landing, (EDL) and additional locomotion (EDLL) profiles are becoming increasingly more complex, with the introduction of lifting/guided entries, hazard avoidance on descent, and a plethora of landing techniques including airbags and the skycrane maneuver. The inclusion of each of these subsystems into a mission profile is associated with a substantial mass penalty. This report explores the new all-in-one entry vehicle concept, TANDEM, a new combined EDLL concept, and compares it to the current state of the art EDL systems. The explored system is lightweight and collapsible and provides the capacity for lifting/guided entry, guided descent, hazard avoidance, omnidirectional impact protection and surface locomotion without the aid of any additional subsystems. This Phase I study explored: 1. The capabilities and feasibility of the TANDEM concept as an EDLL vehicle. 2. Extensive impact analysis to ensure mission success in unfavorable landing conditions, and safe landing in Tessera regions. 3. Development of a detailed design for a conceptual mission to Venus. As a result of our work it was shown that: 1. TANDEM provides additional benefits over the Adaptive, Deployable Entry Placement Technology (ADEPT) including guided descent and surface locomotion, while reducing the mass by 38% compared to the ADEPT-VITaL mission. 2. Demonstrated that the design of tensegrity structures, and TANDEM specifically, grows linearly with an increase in velocity, which was previously unknown. 3. Investigation of surface impact revealed a promising results that suggest a properly configured TANDEM vehicle can safely land and preform science in the Tessera regions, which was previously labeled by the Decadal Survey as, largely inaccessible despite its high scientific interest. This work has already resulted in a NASA TM and will be submitted to the Journal of Spacecraft and Rockets.

  5. Gravity: one of the driving forces for evolution.

    PubMed

    Volkmann, D; Baluska, F

    2006-12-01

    Mechanical load is 10(3) larger for land-living than for water-living organisms. As a consequence, antigravitational material in form of compound materials like lignified cell walls in plants and mineralised bones in animals occurs in land-living organisms preferentially. Besides cellulose, pectic substances of plant cell walls seem to function as antigravitational material in early phases of plant evolution and development. A testable hypothesis including vesicular recycling processes into the tensegrity concept is proposed for both sensing of gravitational force and responding by production of antigravitational material at the cellular level.

  6. Electron Beam Irradiated Intercalated CNT Yarns For Aerospace Applications

    NASA Technical Reports Server (NTRS)

    Waters, Deborah L.; Gaier, James R.; Williams, Tiffany S.; Lopez Calero, Johnny E.; Ramirez, Christopher; Meador, Michael A.

    2015-01-01

    Multi-walled CNT yarns have been experimentally and commercially created to yield lightweight, high conductivity fibers with good tensile properties for application as electrical wiring and multifunctional tendons. Multifunctional tendons are needed as the cable structures in tensegrity robots for use in planetary exploration. These lightweight robust tendons can provide mechanical strength for movement of the robot in addition to power distribution and data transmission. In aerospace vehicles, such as Orion, electrical wiring and harnessing mass can approach half of the avionics mass. Use of CNT yarns as electrical power and data cables could reduce mass of the wiring by thirty to seventy percent. These fibers have been intercalated with mixed halogens to increase their specific electrical conductivity to that near copper. This conductivity, combined with the superior strength and fatigue resistance makes it an attractive alternative to copper for wiring and multifunctional tendon applications. Electron beam irradiation has been shown to increase mechanical strength in pristine CNT fibers through increased cross-linking. Both pristine and intercalated CNT yarns have been irradiated using a 5-megavolt electron beam for various durations and the conductivities and tensile properties will be discussed. Structural information obtained using a field emission scanning electron microscope, energy dispersive X-ray spectroscopy (EDS), and Raman spectroscopy will correlate microstructural details with bulk properties.

  7. Cell prestress. I. Stiffness and prestress are closely associated in adherent contractile cells

    NASA Technical Reports Server (NTRS)

    Wang, Ning; Tolic-Norrelykke, Iva Marija; Chen, Jianxin; Mijailovich, Srboljub M.; Butler, James P.; Fredberg, Jeffrey J.; Stamenovic, Dimitrije; Ingber, D. E. (Principal Investigator)

    2002-01-01

    The tensegrity hypothesis holds that the cytoskeleton is a structure whose shape is stabilized predominantly by the tensile stresses borne by filamentous structures. Accordingly, cell stiffness must increase in proportion with the level of the tensile stress, which is called the prestress. Here we have tested that prediction in adherent human airway smooth muscle (HASM) cells. Traction microscopy was used to measure the distribution of contractile stresses arising at the interface between each cell and its substrate; this distribution is called the traction field. Because the traction field must be balanced by tensile stresses within the cell body, the prestress could be computed. Cell stiffness (G) was measured by oscillatory magnetic twisting cytometry. As the contractile state of the cell was modulated with graded concentrations of relaxing or contracting agonists (isoproterenol or histamine, respectively), the mean prestress ((t)) ranged from 350 to 1,900 Pa. Over that range, cell stiffness increased linearly with the prestress: G (Pa) = 0.18(t) + 92. While this association does not necessarily preclude other interpretations, it is the hallmark of systems that secure shape stability mainly through the prestress. Regardless of mechanism, these data establish a strong association between stiffness of HASM cells and the level of tensile stress within the cytoskeleton.

  8. From molecular to macroscopic via the rational design of a self-assembled 3D DNA crystal.

    PubMed

    Zheng, Jianping; Birktoft, Jens J; Chen, Yi; Wang, Tong; Sha, Ruojie; Constantinou, Pamela E; Ginell, Stephan L; Mao, Chengde; Seeman, Nadrian C

    2009-09-03

    We live in a macroscopic three-dimensional (3D) world, but our best description of the structure of matter is at the atomic and molecular scale. Understanding the relationship between the two scales requires a bridge from the molecular world to the macroscopic world. Connecting these two domains with atomic precision is a central goal of the natural sciences, but it requires high spatial control of the 3D structure of matter. The simplest practical route to producing precisely designed 3D macroscopic objects is to form a crystalline arrangement by self-assembly, because such a periodic array has only conceptually simple requirements: a motif that has a robust 3D structure, dominant affinity interactions between parts of the motif when it self-associates, and predictable structures for these affinity interactions. Fulfilling these three criteria to produce a 3D periodic system is not easy, but should readily be achieved with well-structured branched DNA motifs tailed by sticky ends. Complementary sticky ends associate with each other preferentially and assume the well-known B-DNA structure when they do so; the helically repeating nature of DNA facilitates the construction of a periodic array. It is essential that the directions of propagation associated with the sticky ends do not share the same plane, but extend to form a 3D arrangement of matter. Here we report the crystal structure at 4 A resolution of a designed, self-assembled, 3D crystal based on the DNA tensegrity triangle. The data demonstrate clearly that it is possible to design and self-assemble a well-ordered macromolecular 3D crystalline lattice with precise control.

  9. 3D MRI Modeling of Thin and Spatially Complex Soft Tissue Structures without Shrinkage: Lamprey Myosepta as an Example.

    PubMed

    Wood, Bradley M; Jia, Guang; Carmichael, Owen; McKlveen, Kevin; Homberger, Dominique G

    2018-05-12

    3D imaging techniques enable the non-destructive analysis and modeling of complex structures. Among these, MRI exhibits good soft tissue contrast, but is currently less commonly used for non-clinical research than x-ray CT, even though the latter requires contrast-staining that shrinks and distorts soft tissues. When the objective is the creation of a realistic and complete 3D model of soft tissue structures, MRI data are more demanding to acquire and visualize and require extensive post-processing because they comprise non-cubic voxels with dimensions that represent a trade-off between tissue contrast and image resolution. Therefore, thin soft tissue structures with complex spatial configurations are not always visible in a single MRI dataset, so that standard segmentation techniques are not sufficient for their complete visualization. By using the example of the thin and spatially complex connective tissue myosepta in lampreys, we developed a workflow protocol for the selection of the appropriate parameters for the acquisition of MRI data and for the visualization and 3D modeling of soft tissue structures. This protocol includes a novel recursive segmentation technique for supplementing missing data in one dataset with data from another dataset to produce realistic and complete 3D models. Such 3D models are needed for the modeling of dynamic processes, such as the biomechanics of fish locomotion. However, our methodology is applicable to the visualization of any thin soft tissue structures with complex spatial configurations, such as fasciae, aponeuroses, and small blood vessels and nerves, for clinical research and the further exploration of tensegrity. This article is protected by copyright. All rights reserved. © 2018 Wiley Periodicals, Inc.

  10. Mechanotransduction through Cytoskeleton

    NASA Technical Reports Server (NTRS)

    Ingber, Donald

    2002-01-01

    The goal of this project was to characterize the molecular mechanism by which cells recognize and respond to physical forces in their local environment. The project was based on the working hypothesis that cells sense mechanical stresses, such as those due to gravity, through their cell surface adhesion receptors (e.g., integrins) and that they respond as a result of structural arrangements with their internal cytoskeleton (CSK) which are orchestrated through use of tensegrity architecture. In this project, we carried out studies to define the architectural and molecular basis of cellular mechanotransduction. Our major goal was to define the molecular pathway that mediates mechanical force transfer between integrins and the CSK and to determine how mechanical deformation of integrin-CSK linkages is transduced into a biochemical response. Elucidation of the mechanism by which cells sense mechanical stresses through integrins and translate them into a biochemical response should help us to understand the molecular basis of the cellular response to gravity as well as many other forms of mechanosensation and tissue regulation. The specific aims of this proposal were: 1. To define the molecular basis of mechanical coupling between integrins, vinculin, and the actin CSK; 2. To develop a computer simulation of how mechanical stresses alter CSK structure and test this model in living cells; 3. To determine how mechanical deformation of integrin-CSK linkages is transduced into a biochemical response.

  11. Tensegrity and motor-driven effective interactions in a model cytoskeleton

    NASA Astrophysics Data System (ADS)

    Wang, Shenshen; Wolynes, Peter G.

    2012-04-01

    Actomyosin networks are major structural components of the cell. They provide mechanical integrity and allow dynamic remodeling of eukaryotic cells, self-organizing into the diverse patterns essential for development. We provide a theoretical framework to investigate the intricate interplay between local force generation, network connectivity, and collective action of molecular motors. This framework is capable of accommodating both regular and heterogeneous pattern formation, arrested coarsening and macroscopic contraction in a unified manner. We model the actomyosin system as a motorized cat's cradle consisting of a crosslinked network of nonlinear elastic filaments subjected to spatially anti-correlated motor kicks acting on motorized (fibril) crosslinks. The phase diagram suggests there can be arrested phase separation which provides a natural explanation for the aggregation and coalescence of actomyosin condensates. Simulation studies confirm the theoretical picture that a nonequilibrium many-body system driven by correlated motor kicks can behave as if it were at an effective equilibrium, but with modified interactions that account for the correlation of the motor driven motions of the actively bonded nodes. Regular aster patterns are observed both in Brownian dynamics simulations at effective equilibrium and in the complete stochastic simulations. The results show that large-scale contraction requires correlated kicking.

  12. Mechanotransduction as an Adaptation to Gravity

    PubMed Central

    Najrana, Tanbir; Sanchez-Esteban, Juan

    2016-01-01

    Gravity has played a critical role in the development of terrestrial life. A key event in evolution has been the development of mechanisms to sense and transduce gravitational force into biological signals. The objective of this manuscript is to review how living organisms on Earth use mechanotransduction as an adaptation to gravity. Certain cells have evolved specialized structures, such as otoliths in hair cells of the inner ear and statoliths in plants, to respond directly to the force of gravity. By conducting studies in the reduced gravity of spaceflight (microgravity) or simulating microgravity in the laboratory, we have gained insights into how gravity might have changed life on Earth. We review how microgravity affects prokaryotic and eukaryotic cells at the cellular and molecular levels. Genomic studies in yeast have identified changes in genes involved in budding, cell polarity, and cell separation regulated by Ras, PI3K, and TOR signaling pathways. Moreover, transcriptomic analysis of late pregnant rats have revealed that microgravity affects genes that regulate circadian clocks, activate mechanotransduction pathways, and induce changes in immune response, metabolism, and cells proliferation. Importantly, these studies identified genes that modify chromatin structure and methylation, suggesting that long-term adaptation to gravity may be mediated by epigenetic modifications. Given that gravity represents a modification in mechanical stresses encounter by the cells, the tensegrity model of cytoskeletal architecture provides an excellent paradigm to explain how changes in the balance of forces, which are transmitted across transmembrane receptors and cytoskeleton, can influence intracellular signaling pathways and gene expression. PMID:28083527

  13. Mechanotransduction as an Adaptation to Gravity.

    PubMed

    Najrana, Tanbir; Sanchez-Esteban, Juan

    2016-01-01

    Gravity has played a critical role in the development of terrestrial life. A key event in evolution has been the development of mechanisms to sense and transduce gravitational force into biological signals. The objective of this manuscript is to review how living organisms on Earth use mechanotransduction as an adaptation to gravity. Certain cells have evolved specialized structures, such as otoliths in hair cells of the inner ear and statoliths in plants, to respond directly to the force of gravity. By conducting studies in the reduced gravity of spaceflight (microgravity) or simulating microgravity in the laboratory, we have gained insights into how gravity might have changed life on Earth. We review how microgravity affects prokaryotic and eukaryotic cells at the cellular and molecular levels. Genomic studies in yeast have identified changes in genes involved in budding, cell polarity, and cell separation regulated by Ras, PI3K, and TOR signaling pathways. Moreover, transcriptomic analysis of late pregnant rats have revealed that microgravity affects genes that regulate circadian clocks, activate mechanotransduction pathways, and induce changes in immune response, metabolism, and cells proliferation. Importantly, these studies identified genes that modify chromatin structure and methylation, suggesting that long-term adaptation to gravity may be mediated by epigenetic modifications. Given that gravity represents a modification in mechanical stresses encounter by the cells, the tensegrity model of cytoskeletal architecture provides an excellent paradigm to explain how changes in the balance of forces, which are transmitted across transmembrane receptors and cytoskeleton, can influence intracellular signaling pathways and gene expression.

  14. Mechanotransduction across the cell surface and through the cytoskeleton

    NASA Technical Reports Server (NTRS)

    Wang, N.; Butler, J. P.; Ingber, D. E.

    1993-01-01

    Mechanical stresses were applied directly to cell surface receptors with a magnetic twisting device. The extracellular matrix receptor, integrin beta 1, induced focal adhesion formation and supported a force-dependent stiffening response, whereas nonadhesion receptors did not. The cytoskeletal stiffness (ratio of stress to strain) increased in direct proportion to the applied stress and required intact microtubules and intermediate filaments as well as microfilaments. Tensegrity models that incorporate mechanically interdependent struts and strings that reorient globally in response to a localized stress mimicked this response. These results suggest that integrins act as mechanoreceptors and transmit mechanical signals to the cytoskeleton. Mechanotransduction, in turn, may be mediated simultaneously at multiple locations inside the cell through force-induced rearrangements within a tensionally integrated cytoskeleton.

  15. Rapid flow-induced responses in endothelial cells

    NASA Technical Reports Server (NTRS)

    Stamatas, G. N.; McIntire, L. V.

    2001-01-01

    Endothelial cells alter their morphology, growth rate, and metabolism in response to fluid shear stress. To study rapid flow-induced responses in the 3D endothelial cell morphology and calcium distribution, coupled fluorescence microscopy with optical sectioning, digital imaging, and numerical deconvolution techniques have been utilized. Results demonstrate that within the first minutes of flow application nuclear calcium is increasing. In the same time frame whole cell height and nuclear height are reduced by about 1 microm. Whole cell height changes may facilitate reduction of shear stress gradients on the luminal surface, whereas nuclear structural changes may be important for modulating endothelial growth rate and metabolism. To study the role of the cytoskeleton in these responses, endothelial cells have been treated with specific disrupters (acrylamide, cytochalasin D, and colchicine) of each of the cytoskeleton elements (intermediate filaments, microfilaments, and microtubules, respectively). None of these compounds had any effect on the shear-induced calcium response. Cytochalasin D and acrylamide did not affect the shear-induced nuclear morphology changes. Colchicine, however, completely abrogated the response, indicating that microtubules may be implicated in force transmission from the plasma membrane to the nucleus. A pedagogical model based on tensegrity theory principles is presented that is consistent with the results on the 3D endothelial morphology.

  16. Design Concepts for the Generation-X Mission

    NASA Astrophysics Data System (ADS)

    Lillie, Charles F.; Dailey, D.; Danner, R.; Shropshire, D.; Pearson, D.

    2009-09-01

    The Generation-X mission, proposed by Roger Brissenden at SAO, is one of the Advanced Strategic Mission Concepts that NASA is considering for development in the post-2020 time period. As currently conceived Gen-X would be a follow-on to the International X-ray Observatory (IXO), with a collecting area ≥ 50 m^2, 60-m focal length and 0.1 arc-second spatial resolution, which would be launched in ˜2030 with an Ares V Cargo Launch Vehicle to an L2 orbit. Our design concept assumes an Ares V with a 10-m diameter, 1,400 m^3 volume fairing (or an equivalent launch vehicle) will be developed for NASA's exploration program. The key features of this design include a 16-m diameter deployable x-ray mirror provides a collecting area of 136 m^2; a 60-m deployable optical bench which utilizes a Tensegrity structure to achieve high stiffness with low mass; and adaptive grazing incidence optics. Gen-X's combination of large collecting area and high spatial resolution will provide 4 to 5 orders of magnitude greater sensitivity than IXO, enabling scientists to study the formation and growth of the first black holes at z ≈ 8-15 with 0.1 to 10 keV fluxes of ≈ 10-20 erg cm^{-2}s^{-1}.

  17. Design Concepts for the Generation-X Mission

    NASA Astrophysics Data System (ADS)

    Lillie, Charles F.; Dailey, D.; Danner, R.; Pearson, D.; Shropshire, D.

    2010-03-01

    The Generation-X mission, proposed by Roger Brissenden at SAO, is one of the Advanced Strategic Mission Concepts that NASA is considering for development in the post-2020 time period. As currently conceived Gen-X would be a follow-on to the International X-ray Observatory (IXO), with a collecting area ≥ 50 m2, 60-m focal length and 0.1 arc-second spatial resolution, which would be launched in 2030 with an Ares V Cargo Launch Vehicle to an L2 orbit. Our design concept assumes an Ares V with a 10-m diameter, 1,400 m3 volume fairing (or an equivalent launch vehicle) will be developed for NASA's exploration program. The key features of this design include a 16-m diameter deployable x-ray mirror provides a collecting area of 136 m2 a 60-m deployable optical bench which utilizes a Tensegrity structure to achieve high stiffness with low mass; and adaptive grazing incidence optics. Gen-X's combination of large collecting area and high spatial resolution will provide 4 to 5 orders of magnitude greater sensitivity than IXO, enabling scientists to study the formation and growth of the first black holes at z ≈ 8-15 with 0.1 to 10 keV fluxes of ≈ 10-20 erg cm-2s-1.

  18. 40 CFR 86.1405 - Introduction; structure of subpart.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-Duty Trucks; Certification Short Test Procedures § 86.1405 Introduction; structure of subpart. (a) This... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Introduction; structure of subpart. 86.1405 Section 86.1405 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS...

  19. 40 CFR 86.105 - Introduction; structure of subpart.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Introduction; structure of subpart. 86.105 Section 86.105 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS... Heavy-Duty Vehicles; Test Procedures § 86.105 Introduction; structure of subpart. (a) This subpart...

  20. 40 CFR 86.1305-2004 - Introduction; structure of subpart.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Introduction; structure of subpart. 86.1305-2004 Section 86.1305-2004 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Exhaust Test Procedures § 86.1305-2004 Introduction; structure of subpart. (a) This subpart describes the...

  1. 40 CFR 86.305-79 - Introduction; structure of subpart.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Introduction; structure of subpart. 86.305-79 Section 86.305-79 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR....305-79 Introduction; structure of subpart. (a) This subpart describes the equipment required and the...

  2. 40 CFR 86.1205-90 - Introduction; structure of subpart.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Introduction; structure of subpart. 86.1205-90 Section 86.1205-90 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR...-Fueled and Methanol-Fueled Heavy-Duty Vehicles § 86.1205-90 Introduction; structure of subpart. (a) This...

  3. 40 CFR 86.1305-90 - Introduction; structure of subpart.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Introduction; structure of subpart. 86.1305-90 Section 86.1305-90 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Procedures § 86.1305-90 Introduction; structure of subpart. (a) This subpart describes the equipment required...

  4. 40 CFR 86.505-78 - Introduction; structure of subpart.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Introduction; structure of subpart. 86.505-78 Section 86.505-78 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Regulations for 1978 and Later New Motorcycles; Test Procedures § 86.505-78 Introduction; structure of subpart...

  5. 40 CFR 86.1305-2010 - Introduction; structure of subpart.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Introduction; structure of subpart. 86... Exhaust Test Procedures § 86.1305-2010 Introduction; structure of subpart. (a) This subpart specifies the... use good engineering judgment when testing under this paragraph (h), and must comply with the...

  6. Rheological behavior of mammalian cells.

    PubMed

    Stamenović, D

    2008-11-01

    Rheological properties of living cells determine how cells interact with their mechanical microenvironment and influence their physiological functions. Numerous experimental studies have show that mechanical contractile stress borne by the cytoskeleton and weak power-law viscoelasticity are governing principles of cell rheology, and that the controlling physics is at the level of integrative cytoskeletal lattice properties. Based on these observations, two concepts have emerged as leading models of cytoskeletal mechanics. One is the tensegrity model, which explains the role of the contractile stress in cytoskeletal mechanics, and the other is the soft glass rheology model, which explains the weak power-law viscoelasticity of cells. While these two models are conceptually disparate, the phenomena that they describe are often closely associated in living cells for reasons that are largely unknown. In this review, we discuss current understanding of cell rheology by emphasizing the underlying biophysical mechanism and critically evaluating the existing rheological models.

  7. CRUX: a Compliant Robotic Upper-Extremity eXosuit for Lightweight, Portable, Multi-DoF Muscular Augmentation

    NASA Technical Reports Server (NTRS)

    Lessard, Steven; Pansodtee, Pattawong; Robbins, Ash; Baltaxe-Admony, Leya Breanna; Teodorescu, Mircea; Kurniawan,Sri; Agogino, Adrian; Kurniawan, Sri

    2017-01-01

    Wearable robots can potentially offer their users enhanced stability and strength. These augmentations are ideally designed to actuate harmoniously with the users movements and provide extra force as needed. The creation of such robots, however, is particularly challenging due to the complexity of the underlying human body. In this paper, we present a compliant, robotic exosuit for upper-extremities called CRUX. This exosuit, inspired by tensegrity models of the human arm, features a lightweight (1.3 kg), flexible design for portability. We also show how CRUX maintains full flexibility of the upper-extremities for its users while providing multi- DoF augmentative strength to the major muscles of the arm, as evident by tracking the heart rate of an individual exercising said arm. Exosuits such as CRUX may be useful in physical therapy and in extreme environments where users are expected to exert their bodies to the fullest extent.

  8. Mechanical signaling and the cellular response to extracellular matrix in angiogenesis and cardiovascular physiology

    NASA Technical Reports Server (NTRS)

    Ingber, Donald E.

    2002-01-01

    Great advances have been made in the identification of the soluble angiogenic factors, insoluble extracellular matrix (ECM) molecules, and receptor signaling pathways that mediate control of angiogenesis--the growth of blood capillaries. This review focuses on work that explores how endothelial cells integrate these chemical signals with mechanical cues from their local tissue microenvironment so as to produce functional capillary networks that exhibit specialized form as well as function. These studies have revealed that ECM governs whether an endothelial cell will switch between growth, differentiation, motility, or apoptosis programs in response to a soluble stimulus based on its ability to mechanically resist cell tractional forces and thereby produce cell and cytoskeletal distortion. Transmembrane integrin receptors play a key role in this mechanochemical transduction process because they both organize a cytoskeletal signaling complex within the focal adhesion and preferentially focus mechanical forces on this site. Molecular filaments within the internal cytoskeleton--microfilaments, microtubules, and intermediate filaments--also contribute to the cell's structural and functional response to mechanical stress through their role as discrete support elements within a tensegrity-stabilized cytoskeletal array. Importantly, a similar form of mechanical control also has been shown to be involved in the regulation of contractility in vascular smooth muscle cells and cardiac myocytes. Thus, the mechanism by which cells perform mechanochemical transduction and the implications of these findings for morphogenetic control are discussed in the wider context of vascular development and cardiovascular physiology.

  9. 40 CFR 86.406-78 - Introduction, structure of subpart, further information.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 19 2014-07-01 2014-07-01 false Introduction, structure of subpart..., structure of subpart, further information. (a) This subpart contains general provisions regulating the... discrete concepts are addressed: (1) Requirements. Sections 86.407 to 86.415. (2) Application for...

  10. 40 CFR 86.406-78 - Introduction, structure of subpart, further information.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 19 2012-07-01 2012-07-01 false Introduction, structure of subpart..., structure of subpart, further information. (a) This subpart contains general provisions regulating the... discrete concepts are addressed: (1) Requirements. Sections 86.407 to 86.415. (2) Application for...

  11. 40 CFR 86.406-78 - Introduction, structure of subpart, further information.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 18 2011-07-01 2011-07-01 false Introduction, structure of subpart..., structure of subpart, further information. (a) This subpart contains general provisions regulating the... discrete concepts are addressed: (1) Requirements. Sections 86.407 to 86.415. (2) Application for...

  12. 40 CFR 86.406-78 - Introduction, structure of subpart, further information.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Introduction, structure of subpart..., structure of subpart, further information. (a) This subpart contains general provisions regulating the... discrete concepts are addressed: (1) Requirements. Sections 86.407 to 86.415. (2) Application for...

  13. 40 CFR 86.406-78 - Introduction, structure of subpart, further information.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 19 2013-07-01 2013-07-01 false Introduction, structure of subpart..., structure of subpart, further information. (a) This subpart contains general provisions regulating the... discrete concepts are addressed: (1) Requirements. Sections 86.407 to 86.415. (2) Application for...

  14. Biases of STRUCTURE software when exploring introduction routes of invasive species.

    PubMed

    Lombaert, Eric; Guillemaud, Thomas; Deleury, Emeline

    2018-06-01

    Population genetic methods are widely used to retrace the introduction routes of invasive species. The unsupervised Bayesian clustering algorithm implemented in STRUCTURE is amongst the most frequently used of these methods, but its ability to provide reliable information about introduction routes has never been assessed. We simulated microsatellite datasets to evaluate the extent to which the results provided by STRUCTURE were misleading for the inference of introduction routes. We focused on an invasion scenario involving one native and two independently introduced populations, because it is the sole scenario that can be rejected when obtaining a particular clustering with a STRUCTURE analysis at K = 2 (two clusters). Results were classified as "misleading" or "non-misleading". We investigated the influence of effective size, bottleneck severity and number of loci on the type and frequency of misleading results. We showed that misleading STRUCTURE results were obtained for 10% of all simulated datasets. Our results highlighted two categories of misleading output. The first occurs when the native population has a low level of diversity. In this case, the two introduced populations may be very similar, despite their independent introduction histories. The second category results from convergence issues in STRUCTURE for K = 2, with strong bottleneck severity and/or large numbers of loci resulting in high levels of differentiation between the three populations. Overall, the risk of being misled by STRUCTURE in the context of introduction routes inferences is moderate, but it is important to remain cautious when low genetic diversity or genuine multimodality between runs are involved.

  15. 40 CFR 86.1205-90 - Introduction; structure of subpart.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...-Fueled and Methanol-Fueled Heavy-Duty Vehicles § 86.1205-90 Introduction; structure of subpart. (a) This... emission levels from gasoline-fueled, natural gas-fueled, liquefied petroleum gas-fueled and methanol...

  16. Hepatitis B virus core protein allosteric modulators can distort and disrupt intact capsids.

    PubMed

    Schlicksup, Christopher John; Wang, Joseph Che-Yen; Francis, Samson; Venkatakrishnan, Balasubramanian; Turner, William W; VanNieuwenhze, Michael; Zlotnick, Adam

    2018-01-29

    Defining mechanisms of direct-acting antivirals facilitates drug development and our understanding of virus function. Heteroaryldihydropyrimidines (HAPs) inappropriately activate assembly of hepatitis B virus (HBV) core protein (Cp), suppressing formation of virions. We examined a fluorophore-labeled HAP, HAP-TAMRA. HAP-TAMRA induced Cp assembly and also bound pre-assembled capsids. Kinetic and spectroscopic studies imply that HAP-binding sites are usually not available but are bound cooperatively. Using cryo-EM, we observed that HAP-TAMRA asymmetrically deformed capsids, creating a heterogeneous array of sharp angles, flat regions, and outright breaks. To achieve high resolution reconstruction (<4 Å), we introduced a disulfide crosslink that rescued particle symmetry. We deduced that HAP-TAMRA caused quasi-sixfold vertices to become flatter and fivefold more angular. This transition led to asymmetric faceting. That a disordered crosslink could rescue symmetry implies that capsids have tensegrity properties. Capsid distortion and disruption is a new mechanism by which molecules like the HAPs can block HBV infection. © 2017, Schlicksup et al.

  17. CRUX: A compliant robotic upper-extremity exosuit for lightweight, portable, multi-joint muscular augmentation.

    PubMed

    Lessard, Steven; Pansodtee, Pattawong; Robbins, Ash; Baltaxe-Admony, Leya Breanna; Trombadore, James M; Teodorescu, Mircea; Agogino, Adrian; Kurniawan, Sri

    2017-07-01

    Wearable robots can potentially offer their users enhanced stability and strength. These augmentations are ideally designed to actuate harmoniously with the user's movements and provide extra force as needed. The creation of such robots, however, is particularly challenging due to the underlying complexity of the human body. In this paper, we present a compliant, robotic exosuit for upper extremities called CRUX. This exosuit, inspired by tensegrity models of the human arm, features a lightweight (1.3 kg), flexible multi-joint design for portable augmentation. We also illustrate how CRUX maintains the full range of motion of the upper-extremities for its users while providing multi-DoF strength amplification to the major muscles of the arm, as evident by tracking the heart rate of an individual exercising said arm. Exosuits such as CRUX may be useful in physical therapy and in extreme environments where users are expected to exert their bodies to the fullest extent.

  18. Hepatitis B virus core protein allosteric modulators can distort and disrupt intact capsids

    PubMed Central

    Schlicksup, Christopher John; Wang, Joseph Che-Yen; Francis, Samson; Venkatakrishnan, Balasubramanian; Turner, William W; VanNieuwenhze, Michael

    2018-01-01

    Defining mechanisms of direct-acting antivirals facilitates drug development and our understanding of virus function. Heteroaryldihydropyrimidines (HAPs) inappropriately activate assembly of hepatitis B virus (HBV) core protein (Cp), suppressing formation of virions. We examined a fluorophore-labeled HAP, HAP-TAMRA. HAP-TAMRA induced Cp assembly and also bound pre-assembled capsids. Kinetic and spectroscopic studies imply that HAP-binding sites are usually not available but are bound cooperatively. Using cryo-EM, we observed that HAP-TAMRA asymmetrically deformed capsids, creating a heterogeneous array of sharp angles, flat regions, and outright breaks. To achieve high resolution reconstruction (<4 Å), we introduced a disulfide crosslink that rescued particle symmetry. We deduced that HAP-TAMRA caused quasi-sixfold vertices to become flatter and fivefold more angular. This transition led to asymmetric faceting. That a disordered crosslink could rescue symmetry implies that capsids have tensegrity properties. Capsid distortion and disruption is a new mechanism by which molecules like the HAPs can block HBV infection. PMID:29377794

  19. 40 CFR 86.505-2004 - Introduction; structure of subpart.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... procedures and the test fuel described in subpart B of this part for diesel-fueled light-duty vehicles. PM... Regulations for 1978 and Later New Motorcycles; Test Procedures § 86.505-2004 Introduction; structure of... perform exhaust emission tests on motorcycles. Subpart E sets forth the testing requirements and test...

  20. 40 CFR 86.505-2004 - Introduction; structure of subpart.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... procedures and the test fuel described in subpart B of this part for diesel-fueled light-duty vehicles. PM... Regulations for 1978 and Later New Motorcycles; Test Procedures § 86.505-2004 Introduction; structure of... perform exhaust emission tests on motorcycles. Subpart E sets forth the testing requirements and test...

  1. 40 CFR 86.505-2004 - Introduction; structure of subpart.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... procedures and the test fuel described in subpart B of this part for diesel-fueled light-duty vehicles. PM... Regulations for 1978 and Later New Motorcycles; Test Procedures § 86.505-2004 Introduction; structure of... perform exhaust emission tests on motorcycles. Subpart E sets forth the testing requirements and test...

  2. 40 CFR 86.505-2004 - Introduction; structure of subpart.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... procedures and the test fuel described in subpart B of this part for diesel-fueled light-duty vehicles. PM... Regulations for 1978 and Later New Motorcycles; Test Procedures § 86.505-2004 Introduction; structure of... perform exhaust emission tests on motorcycles. Subpart E sets forth the testing requirements and test...

  3. 40 CFR 86.505-2004 - Introduction; structure of subpart.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... procedures and the test fuel described in subpart B of this part for diesel-fueled light-duty vehicles. PM... Regulations for 1978 and Later New Motorcycles; Test Procedures § 86.505-2004 Introduction; structure of... perform exhaust emission tests on motorcycles. Subpart E sets forth the testing requirements and test...

  4. Population structure and molecular characterization of Nigerian field genebank collections of cacao, Theobroma cacao L

    USDA-ARS?s Scientific Manuscript database

    Over the last 130 years since cacao introduction into Nigeria, genetic variability in cacao cultivated which has increased as a result of further introduction and breeding activities, remain largely unknown. To determine the genetic diversity and population structure of cacao populations, 13 cacao ...

  5. "My Initial Concern Is to Get a Hearing": Exploring What Makes an Effective History Essay Introduction

    ERIC Educational Resources Information Center

    Worth, Paula

    2016-01-01

    Struck by the dullness of some of her students' essay introductions, Paula Worth reflected on the fact that she had never focused specifically on introductions. After surveying existing work by history teachers on essay structure in general and introductions in particular, she turns to the work of historians. Drawing on scholarly writing by…

  6. The Introduction of Crystallographic Concepts Using Lap-Dissolve Slide Techniques.

    ERIC Educational Resources Information Center

    Bodner, George M.; And Others

    1980-01-01

    Describes a method using lap-dissolve slide techniques with two or more slide projectors focused on a single screen for presenting visual effects that show structural features in extended arrays of atoms, or ions involving up to several hundred atoms. Presents an outline of an introduction to the structures of crystalline solids. (CS)

  7. Communication and Security Issues in Online Education: Student Self-Disclosure in Course Introductions

    ERIC Educational Resources Information Center

    McMillion, Tonya; Tucker King, Carie S.

    2017-01-01

    In designing online and hybrid courses, instructors should consider structure, student motivation, and interaction (per Moore's 1993 Theory of Transactional Distance). To motivate students to interact and to build course community, instructors may assign student introductions. However, after examining students' introductions in a hybrid…

  8. Thematicity in Applied Linguistics Textbooks: A Comparative Study of Foreword, Introduction and Preface

    ERIC Educational Resources Information Center

    Jalilifar, Alireza; Montazeri, Ebtesam Abbasi

    2017-01-01

    While identifying the generic structure of academic introductions has been the focus of extensive research over the last few decades, investigating some, if not all, of the available linguistic resources that realize the identified generic structures seems to have been largely under-focused. In order to shed light on the way that the communicative…

  9. Heterogeneous impact of Taiwan's national health insurance on labor force participation of married women by income and family structures.

    PubMed

    Liao, Pei-An

    2011-02-01

    In this study, I investigate how the impact of the National Health Insurance (NHI) introduction in Taiwan in 1995 on the labor force participation (LFP) decisions of married women varies with income and family structures. Employing the difference-in-differences (DID) approach, I find that the NHI introduction reduced LFP of married women in the twenty-fifth to fiftieth percentiles of the income distribution between 17.8 and 21.7 percentage points (33%-40%). The difference-in-differences-in-differences (DIDID) results suggest that married women in different family structures (the presence of children under 3 or less healthy elderly household members) did not respond differently to the NHI introduction.

  10. 2D-DIGE proteomic analysis of mesenchymal stem cell cultured on the elasticity-tunable hydrogels.

    PubMed

    Kuboki, Thasaneeya; Kantawong, Fahsai; Burchmore, Richard; Dalby, Matthew J; Kidoaki, Satoru

    2012-01-01

    The present study focuses on mechanotransduction in mesenchymal stem cells (MSCs) in response to matrix elasticity. By using photocurable gelatinous gels with tunable stiffness, proteomic profiles of MSCs cultured on tissue culture plastic, soft (3 kPa) and stiff (52 kPa) matrices were deciphered using 2-dimensional differential in-gel analysis (2D-DIGE). The DIGE data, tied to immunofluorescence, indicated abundance and organization changes in the cytoskeletonal proteins as well as differential regulation of important signaling-related proteins, stress-responsing proteins and also proteins involved in collagen synthesis. The major CSK proteins including actin, tubulin and vimentin of the cells cultured on the gels were remarkably changed their expressions. Significant down-regulation of α-tubulin and β-actin can be observed on gel samples in comparison to the rigid tissue culture plates. The expression abundance of vimentin appeared to be highest in the MSCs cultured on hard gels. These results suggested that the substrate stiffness significantly affects expression balances in cytoskeletal proteins of MSCs with some implications to cellular tensegrity.

  11. Rhetorical Organisation of the Subsections of Research Article Introductions in Applied Linguistics

    ERIC Educational Resources Information Center

    Öztürk, Ismet

    2018-01-01

    Since the publication of the book Genre Analysis (CUP) by Swales (1990), many studies have focused on the study of the rhetorical organisation of different sections of research articles (RAs). The organisation of RA introductions has received most of the attention. However, the focus has generally been on the structure of introductions without…

  12. Stepwise introduction of laparoscopic liver surgery: validation of guideline recommendations.

    PubMed

    van der Poel, Marcel J; Huisman, Floor; Busch, Olivier R; Abu Hilal, Mohammad; van Gulik, Thomas M; Tanis, Pieter J; Besselink, Marc G

    2017-10-01

    Uncontrolled introduction of laparoscopic liver surgery (LLS) could compromise postoperative outcomes. A stepwise introduction of LLS combined with structured training is advised. This study aimed to evaluate the impact of such a stepwise introduction. A retrospective, single-center case series assessing short term outcomes of all consecutive LLS in the period November 2006-January 2017. The technique was implemented in a stepwise fashion. To evaluate the impact of this stepwise approach combined with structured training, outcomes of LLS before and after a laparoscopic HPB fellowship were compared. A total of 135 laparoscopic resections were performed. Overall conversion rate was 4% (n = 5), clinically relevant complication rate 13% (n = 18) and mortality 0.7% (n = 1). A significant increase in patients with major LLS, multiple liver resections, previous abdominal surgery, malignancies and lesions located in posterior segments was observed after the fellowship as well as a decrease in the use of hand-assistance. Increasing complexity in the post fellowship period was reflected by an increase in operating times, but without comprising other surgical outcomes. A stepwise introduction of LLS combined with structured training reduced the clinical impact of the learning curve, thereby confirming guideline recommendations. Copyright © 2017 International Hepato-Pancreato-Biliary Association Inc. Published by Elsevier Ltd. All rights reserved.

  13. Using a Social Science--Fictional Play to Teach about Global Capitalism and Macro-Structural Systems in Introduction to Sociology

    ERIC Educational Resources Information Center

    Pelak, Cynthia Fabrizio; Duncan, Stacey

    2017-01-01

    This article explores the use of a social science-fictional play to teach macro-structural concepts related to global capitalism and surplus labor in a small and large Introduction to Sociology course. Relying on a cross-disciplinary and critical pedagogical approach that combines theory and practice to empower students to develop a critical…

  14. Surface Acoustic Wave Transducer Study.

    DTIC Science & Technology

    1978-05-01

    B. Network Analysis 48 C. Experimental Results 53 D. Conc lusions 56 VI. Analysis of SAW Propagation in Layered Structures . . . 56 A. Introduction...unLdtrect1ona~ transducer and the associated matching networks . The capacity weighted transducer consists of a layered structure in which the lower...CAPACITIVELY WEIGHTED TRANSDUCERS A. Introduction The capacitive tap weight network transducer (CNN) has been pre- .5 sented in the interim as an

  15. Introduction | Center for Cancer Research

    Cancer.gov

    Introduction The Biophysics Resource (BR) was established in January 2001. Our mission is to provide CCR investigators with access to both the latest instrumentation and expertise in characterizing the biophysical aspects of systems under structural investigation.

  16. New parasites and predators follow the introduction of two fish species to a subarctic lake: implications for food-web structure and functioning.

    PubMed

    Amundsen, Per-Arne; Lafferty, Kevin D; Knudsen, Rune; Primicerio, Raul; Kristoffersen, Roar; Klemetsen, Anders; Kuris, Armand M

    2013-04-01

    Introduced species can alter the topology of food webs. For instance, an introduction can aid the arrival of free-living consumers using the new species as a resource, while new parasites may also arrive with the introduced species. Food-web responses to species additions can thus be far more complex than anticipated. In a subarctic pelagic food web with free-living and parasitic species, two fish species (arctic charr Salvelinus alpinus and three-spined stickleback Gasterosteus aculeatus) have known histories as deliberate introductions. The effects of these introductions on the food web were explored by comparing the current pelagic web with a heuristic reconstruction of the pre-introduction web. Extinctions caused by these introductions could not be evaluated by this approach. The introduced fish species have become important hubs in the trophic network, interacting with numerous parasites, predators and prey. In particular, five parasite species and four predatory bird species depend on the two introduced species as obligate trophic resources in the pelagic web and could therefore not have been present in the pre-introduction network. The presence of the two introduced fish species and the arrival of their associated parasites and predators increased biodiversity, mean trophic level, linkage density, and nestedness; altering both the network structure and functioning of the pelagic web. Parasites, in particular trophically transmitted species, had a prominent role in the network alterations that followed the introductions.

  17. New parasites and predators follow the introduction of two fish species to a subarctic lake: implications for food-web structure and functioning

    USGS Publications Warehouse

    Amundsen, Per-Arne; Lafferty, Kevin D.; Knudsen, Rune; Primicerio, Raul; Kristoffersen, Roar; Klemetsen, Anders; Kuris, Armand M.

    2012-01-01

    Introduced species can alter the topology of food webs. For instance, an introduction can aid the arrival of free-living consumers using the new species as a resource, while new parasites may also arrive with the introduced species. Food-web responses to species additions can thus be far more complex than anticipated. In a subarctic pelagic food web with free-living and parasitic species, two fish species (arctic charr Salvelinus alpinus and three-spined stickleback Gasterosteus aculeatus) have known histories as deliberate introductions. The effects of these introductions on the food web were explored by comparing the current pelagic web with a heuristic reconstruction of the pre-introduction web. Extinctions caused by these introductions could not be evaluated by this approach. The introduced fish species have become important hubs in the trophic network, interacting with numerous parasites, predators and prey. In particular, five parasite species and four predatory bird species depend on the two introduced species as obligate trophic resources in the pelagic web and could therefore not have been present in the pre-introduction network. The presence of the two introduced fish species and the arrival of their associated parasites and predators increased biodiversity, mean trophic level, linkage density, and nestedness; altering both the network structure and functioning of the pelagic web. Parasites, in particular trophically transmitted species, had a prominent role in the network alterations that followed the introductions.

  18. Helicopter Fatigue Life Assessment

    DTIC Science & Technology

    1981-03-01

    is made to bring together alternative statistical opinions. 1. INTRODUCTION In almost arn paper on helicopter fatigue (references 1-15) a diagram is...of fatigue life calculations. In the excercise of the A.H.S., mentioned in the introduction the ratios of fatljue life, based on a cycle counting...monitoring. I INTRODUCTION The requirements for the design of structures of United Kingdom Military aeroplanes against fatigue are contained in Aviation

  19. The risks of introduction of the Amazonian palm Euterpe oleracea in the Atlantic rainforest.

    PubMed

    Tiberio, F C S; Sampaio-E-Silva, T A; Matos, D M S; Antunes, A Z

    2016-02-01

    The introduction of a species may alter ecological processes of native populations, such as pollination and dispersal patterns, leading to changes in population structure. When the introduced and the native species are congeners, interference in pollination can also lead to hybridization. We aimed to understand the ecological aspects of Euterpe oleracea introduction in the Atlantic forest and the possible consequences for the conservation of the native congener Euterpe edulis. We analysed the population structure of palm populations, including hybrids, and observed the interaction with frugivorous birds of both palm species after E. oleracea introduction. We observed that E. edulis had significantly lower density and a smaller number of seedlings when occurring with E. oleracea. Native and introduced Euterpe species shared nine frugivorous bird species. E. oleracea and hybrids had dispersed outside the original planting area. Consequently, the risks of introduction of E. oleracea may mostly be related to the disruption of interactions between E. edulis and frugivorous birds and the spontaneous production of hybrids. Finally, the cultivation of E. oleracea and hybrids in Atlantic rainforest could affect the conservation of the already endangered E. edulis.

  20. Aircraft Lightning Protection Handbook

    DTIC Science & Technology

    1989-09-01

    tape or metal braid . The shield. The effect of leakage through the connector can transfer characteristics can seldom be determined by thus be...62 REFERENCES 66 CHAPTER 4 LIGHTNING EFFECTS ON AIRCRAFT 69 4.1 Introduction 69 4.2 Direct Effects on Metal Structures 70 4.2.1 Pitting and Melt...Certification plans 112 5.8 Test Plans 113 REFERENCES 113 Chapter 6 DIRECT EFFECTS PROTECTION 115 6.1 Introduction 115 6.2 Direct Effects on Metal Structures

  1. Structural damage to periodontal tissues at varying rate of anesthetic injection.

    PubMed

    Sarapultseva, Maria; Sarapultsev, Alexey; Medvedeva, Svetlana; Danilova, Irina

    2018-04-01

    Incorrect administration of an anesthetic during local anesthesia is one of the most important causes of pain symptoms in patients scheduled for dental procedures. The current study assessed the severity of damage to periodontal tissue following different rates of anesthetic administration. The research was conducted on 50 outbred male rats with a body mass of 180-240 g. The anesthetic used was 1% articaine. The results showed that administration of the anesthetic at a rapid pace caused structural damage to the periodontal tissue. Further, signs of impaired microcirculation were noted at all rates of administration. Biochemical studies demonstrated changes in the level of glucose and enzymes with the rapid introduction of the anesthetic, indicating severe systemic stress response of the body. Injection of local anesthetic at any rate of introduction induces vascular congestion in the microcirculatory bloodstream and exudative reactions. Rapid introduction of an anesthetic causes progression of structural changes in the gingival tissue.

  2. Deterrent activity of hops flavonoids and their derivatives against stored product pests.

    PubMed

    Jackowski, J; Popłoński, J; Twardowska, K; Magiera-Dulewicz, J; Hurej, M; Huszcza, E

    2017-10-01

    Five flavonoids from hops, two of their derivatives, along with naringenin used as a model compound, were tested for their antifeedant activity against three coleopteran stored product pests: Sitophilus granarius L., Tribolium confusum Duv. and Trogoderma granarium Everts. The introduction, into the tested flavonoid molecules, of additional structural fragments such as prenyl or dimethylpyran moiety, is proposed to significantly alter the deterrent activity of the compounds. The prenyl moiety in flavonoids increased the deterrent activity of these compounds in all three of the grain feeding species used in the tests. It is also concluded that the introduction of dimethylpyran moiety to the flavonoid structure increases its deterrent activity in S. granarius and T. confusum, but in one of the test insects, T. granarium, an increased feeding was observed in response to the introduction of dimethylpyran moiety to the flavonoid structure.

  3. Impact of coastal defence structures (tetrapods) on a demersal hard-bottom fish community in the southern North Sea.

    PubMed

    Wehkamp, Stephanie; Fischer, Philipp

    2013-02-01

    In the coming decades, artificial defence structures will increase in importance worldwide for the protection of coasts against the impacts of global warming. However, the ecological effects of such structures on the natural surroundings remain unclear. We investigated the impact of experimentally introduced tetrapod fields on the demersal fish community in a hard-bottom area in the southern North Sea. The results indicated a significant decrease in fish abundance in the surrounding area caused by migration effects towards the artificial structures. Diversity (HB) and evenness (E) values exhibited greater variation after the introduction of the tetrapods. Additionally, a distinct increase in young-of-the-year (YOY) fish was observed near the structures within the second year after introduction. We suggest that the availability of adequate refuges in combination with additional food resources provided by the artificial structures has a highly species-specific attraction effect. However, these findings also demonstrate that our knowledge regarding the impact of artificial structures on temperate fish communities is still too limited to truly understand the ecological processes that are initiated by the introduction of artificial structures. Long-term investigations and additional experimental in situ work worldwide will be indispensable for a full understanding of the mechanisms by which coastal defence structures interact with the coastal environment. Copyright © 2012 Elsevier Ltd. All rights reserved.

  4. Tissue specific characterisation of Lim-kinase 1 expression during mouse embryogenesis

    PubMed Central

    Lindström, Nils O.; Neves, Carlos; McIntosh, Rebecca; Miedzybrodzka, Zosia; Vargesson, Neil; Collinson, J. Martin

    2012-01-01

    The Lim-kinase (LIMK) proteins are important for the regulation of the actin cytoskeleton, in particular the control of actin nucleation and depolymerisation via regulation of cofilin, and hence may control a large number of processes during development, including cell tensegrity, migration, cell cycling, and axon guidance. LIMK1/LIMK2 knockouts disrupt spinal cord morphogenesis and synapse formation but other tissues and developmental processes that require LIMK are yet to be fully determined. To identify tissues and cell-types that may require LIMK, we characterised the pattern of LIMK1 protein during mouse embryogenesis. We showed that LIMK1 displays an expression pattern that is temporally dynamic and tissue-specific. In several tissues LIMK1 is detected in cell-types that also express Wilms’ tumour protein 1 and that undergo transitions between epithelial and mesenchymal states, including the pleura, epicardium, kidney nephrons, and gonads. LIMK1 was also found in a subset of cells in the dorsal retina, and in mesenchymal cells surrounding the peripheral nerves. This detailed study of the spatial and temporal expression of LIMK1 shows that LIMK1 expression is more dynamic than previously reported, in particular at sites of tissue–tissue interactions guiding multiple developmental processes. PMID:21167960

  5. Correlation of Structural Analysis and Test Results for the McDonnell Douglas Stitched/RFI All-Composite Wing Stub Box

    NASA Technical Reports Server (NTRS)

    Wang, John T.; Jegley, Dawn C.; Bush, Harold G.; Hinrichs, Stephen C.

    1996-01-01

    The analytical and experimental results of an all-composite wing stub box are presented in this report. The wing stub box, which is representative of an inboard portion of a commercial transport high-aspect-ratio wing, was fabricated from stitched graphite-epoxy material with a Resin Film Infusion manufacturing process. The wing stub box was designed and constructed by the McDonnell Douglas Aerospace Company as part of the NASA Advanced Composites Technology program. The test article contained metallic load-introduction structures on the inboard and outboard ends of the graphite-epoxy wing stub box. The root end of the inboard load introduction structure was attached to a vertical reaction structure, and an upward load was applied to the outermost tip of the outboard load introduction structure to induce bending of the wing stub box. A finite element model was created in which the center portion of the wing-stub-box upper cover panel was modeled with a refined mesh. The refined mesh was required to represent properly the geometrically nonlinear structural behavior of the upper cover panel and to predict accurately the strains in the stringer webs of the stiffened upper cover panel. The analytical and experimental results for deflections and strains are in good agreement.

  6. Role of introduction history and landscape in the range expansion of brown trout (Salmo trutta L.) in the Kerguelen Islands.

    PubMed

    Launey, Sophie; Brunet, Geraldine; Guyomard, René; Davaine, Patrick

    2010-01-01

    Human-mediated biological invasions constitute interesting case studies to understand evolutionary processes, including the role of founder effects. Population expansion of newly introduced species can be highly dependant on barriers caused by landscape features, but identifying these barriers and their impact on genetic structure is a relatively recent concern in population genetics and ecology. Salmonid populations of the Kerguelen Islands archipelago are a favorable model system to address these questions as these populations are characterized by a simple history of introduction, little or no anthropogenic influence, and demographic monitoring since the first introductions. We analyzed genetic variation at 10 microsatellite loci in 19 populations of brown trout (Salmo trutta L.) in the Courbet Peninsula (Kerguelen Islands), where the species, introduced in 3 rivers only, has colonized the whole water system in 40 years. Despite a limited numbers of introductions, trout populations have maintained a genetic diversity comparable with what is found in hatchery or wild populations in Europe, but they are genetically structured. The main factor explaining the observed patterns of genetic diversity is the history of introductions, with each introduced population acting as a source for colonization of nearby rivers. Correlations between environmental and genetic parameters show that within each "source population" group, landscape characteristics (type of coast, accessibility of river mouth, distances between rivers, river length ...) play a role in shaping directions and rates of migration, and thus the genetic structure of the colonizing populations.

  7. ISST (Intercontinental Ballistic Missile Silo Superhardening Technology) Structure with SIFCON (Slurry-Infiltrated Fiber Concrete) - HFC-2 Test

    DTIC Science & Technology

    1988-04-01

    Government-related pro- curement, the United States Government incurs no responsibility or any obli -j gation whatsoever. The fact that the Government...Arizona. NIIERI then began a program to deveiop a slurry mix design for use in the structure, as well as construction techniques for placing the SIFCON in...OBJECTIVES 3 II CONSTRUCTION AND FIELDING OPERATIONS 4 INTRODUCTION 4 I DEMONSTRATION PROGRAM 4 Introduct ion 4 Procedure 4 Results 7 $ DESIGN 7 I ntrod uc

  8. Atomic Structure

    NASA Astrophysics Data System (ADS)

    Whelan, Colm T.

    2018-04-01

    A knowledge of atomic theory should be an essential part of every physicist's and chemist's toolkit. This book provides an introduction to the basic ideas that govern our understanding of microscopic matter, and the essential features of atomic structure and spectra are presented in a direct and easily accessible manner. Semi-classical ideas are reviewed and an introduction to the quantum mechanics of one and two electron systems and their interaction with external electromagnetic fields is featured. Multielectron atoms are also introduced, and the key methods for calculating their properties reviewed.

  9. Electrical resistance behavior of oxyfluorinated graphene under oxidizing and reducing gas exposure.

    PubMed

    Im, Ji Sun; Bae, Tae-Sung; Shin, Eunjeong; Lee, Young-Seak

    2014-03-01

    The electrical resistance behavior of graphene was studied under oxidizing and reducing gas exposure. The graphene surface was modified via oxyfluorination to obtain a specific surface area and oxygen functional groups. Fluorine radicals provided improved pore structure and introduction of an oxygen functional group. A high-performance gas sensor was obtained based on enlarged target gas adsorption sites and an enhanced electron charge transfer between the target gas and carbon surface via improved pore structure and the introduction of oxygen functional groups, respectively.

  10. Fish assemblage structure in an Oklahoma Ozark stream before and after rainbow trout introduction

    USGS Publications Warehouse

    Walsh, M.G.; Winkelman, D.L.

    2005-01-01

    Rainbow trout Oncorhynchus mykiss have been widely stocked throughout the United States as a popular sport fish. Our study was initiated to evaluate potential effects of rainbow trout introduction on native fishes to inform future decisions about trout stocking in northeastern Oklahoma streams. We sampled fish assemblages in pools, glides, and riffles in Brush Creek, Delaware County, Oklahoma, from February 2000 to September 2002, and experimentally stocked rainbow trout into the stream from November 2000 to March 2001 and November 2001 to March 2002. We used a combination of multivariate analyses to evaluate seasonal and habitat effects on native fish assemblages and to compare assemblage structure between prestocking, the first year of stocking, and the second year of stocking. Mesohabitat type significantly affected assemblage structure among years, whereas we did not detect an effect of season. We did not detect differences in assemblage structure among years in glide or riffle habitats. Native fish assemblage structure in pool habitats before rainbow trout introduction differed from assemblage structure in both the first and second year of stocking. Declines in seven species, including two native game fish (smallmouth bass Micropterus dolomieu and bluegill Lepomis machrochirus), contributed to assemblage dissimilarity in pool habitats between prestocking conditions and the second year of stocking. Our results indicate that stocking rainbow trout may cause local disruption in assemblage structure in pool habitats. ?? 2004 by the American Fisheries Society.

  11. Aircraft Dynamic Loads due to Flow Separation (Les Contraintes Aerodynamiques Imposees aux Aeronefs par le Decollement de l’Ecoulement)

    DTIC Science & Technology

    1990-09-01

    the 70th meeting of the AGARD Structures and Materials Panel. Some conclusions are drawn and recommendations made for future research. 1. INTRODUCTION ...angle of incidence INTRODUCTION Modern combat aircraft must be capable of flying under conditions of separated flows in order to achieve high...symbol means PSD. Background an Introduction One of the earliest buffet investigations, by Frazer and Duncan, Reference 1, concerned an accident that

  12. Quarks, Leptons, and Bosons: A Particle Physics Primer.

    ERIC Educational Resources Information Center

    Wagoner, Robert; Goldsmith, Donald

    1983-01-01

    Presented is a non-technical introduction to particle physics. The material is adapted from chapter 3 of "Cosmic Horizons," (by Robert Wagoner and Don Goldsmith), a lay-person's introduction to cosmology. Among the topics considered are elementary particles, forces and motion, and higher level structures. (JN)

  13. Introductions in Research Articles: Variation across Disciplines.

    ERIC Educational Resources Information Center

    Samraj, B.

    2002-01-01

    Reports on an analysis of research article introductions from two related fields, Wildlife Behavior and Conservation Biology, using Swales' (1990), "Genre Analysis. English in Academic and Research Settings." Results of the analysis reveal disciplinary variation in the structure of this genre, which has important pedagogical implications.…

  14. [Synthesis and spectral characteristic of Ga-Fe3O4 at room temperature].

    PubMed

    Wang, Jing; Deng, Tong; Yang, Cai-Qin; Lin, Yu-Long; Wang, Wei; Wu, Hai-Yan

    2008-03-01

    Gallium bearing ferrites with different gallium content were synthesized by oxidation of ferrous and gallium ions under alkaline condition and room temperature. The samples were subjected to IR, XRD, Mossbauer spectral analysis and magnetization characterization. The results indicated that the green-rust intermediate phase would be produced during the procedure of Ga-Fe3O4 formation, and the green-rust intermediate phase was converted to ferrites with spinel structure during the drying under hot-N2 atmosphere. With the introduction of gallium into the spinel structure, the interplanar crystal spacing of the spinel structure decreased, as indicated from XRD spectra, and the lattice vibration of M(T)-O-M(o) moved to the high-frequency resulting from IR spectra. A small amount gallium introduction entered the tetrahedral sites preferentially rather than the octahedral sites, and increasing gallium introduction would enhance the occupation of octahedral sites. Furthermore, a small content of gallium in the initial solution could prevent the formation of non-magnetic Fe2O3.

  15. IR Cards: Inquiry-Based Introduction to Infrared Spectroscopy

    ERIC Educational Resources Information Center

    Bennett, Jacqueline; Forster, Tabetha

    2010-01-01

    As infrared spectroscopy (IR) is frequently used in undergraduate organic chemistry courses, an inductive introduction to IR spectroscopy that uses index cards printed with spectra, structures, and chemical names is described. Groups of students are given an alphabetized deck of these "IR cards" to sort into functional groups. The students then…

  16. German Ambulatory Care Physicians' Perspectives on Continuing Medical Education--A National Survey

    ERIC Educational Resources Information Center

    Kempkens, Daniela; Dieterle, Wilfried E.; Butzlaff, Martin; Wilson, Andrew; Bocken, Jan; Rieger, Monika A.; Wilm, Stefan; Vollmar, Horst C.

    2009-01-01

    Introduction: This survey aimed to investigate German ambulatory physicians' opinions about mandatory continuing medical education (CME) and CME resources shortly before the introduction of mandatory CME in 2004. Methods: A structured national telephone survey of general practitioners and specialists was conducted. Main outcome measures were…

  17. A LEARNER'S SYNOPSIS OF SWAHILI STRUCTURE.

    ERIC Educational Resources Information Center

    Foreign Service (Dept. of State), Washington, DC. Foreign Service Inst.

    WRITTEN SPECIFICALLY TO HELP STUDENTS LEARN TO READ SWAHILI NEWSPAPERS, THIS BRIEF INTRODUCTION TO THAT LANGUAGE EMPHASIZES VOCABULARY AND GRAMMAR PATTERNS MOST COMMONLY FOUND IN EAST AFRICAN NEWSWRITING. IT ASSUMES NO PRIOR KNOWLEDGE OF SWAHILI AND IS DESIGNED TO BE USED WITH LESSONS 1-25 OF "AN ACTIVE INTRODUCTION TO NEWSPAPER…

  18. 40 CFR 86.205-11 - Introduction; structure of this subpart.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES Emission Regulations for 1994 and Later Model Year Gasoline-Fueled New Light-Duty Vehicles, New Light-Duty Trucks and New Medium-Duty Passenger Vehicles; Cold Temperature Test Procedures § 86.205-11 Introduction...

  19. 40 CFR 86.205-94 - Introduction; structure of this subpart.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES Emission Regulations for 1994 and Later Model Year Gasoline-Fueled New Light-Duty Vehicles, New Light-Duty Trucks and New Medium-Duty Passenger Vehicles; Cold Temperature Test Procedures § 86.205-94 Introduction...

  20. Authorized Course of Instruction for the Quinmester Program. Science: Cell Biology, Introduction to Life Science.

    ERIC Educational Resources Information Center

    Dade County Public Schools, Miami, FL.

    This instructional package contains two biological units developed for the Dade County Florida Quinmester Program. "Introduction to Life Sciences" develops student understandings of cell structure and function, and compares different levels of cellular organization. "Cell Biology" investigates the origin of modern cellular…

  1. Structuralism: Its Implications for the Performance of Prose Fiction

    ERIC Educational Resources Information Center

    Hopkins, Mary Francis

    1977-01-01

    Discusses the implications of structuralism by examining "Introduction to The Structural Analysis of Narrative", a contemporary writing by Roland Barthes. Explains Barthes' terms and concepts by using Virginia Woolf's Mrs. Dalloway character for an example. (MH)

  2. Controlled Detonation Dynamics in Additively Manufactured High Explosives

    NASA Astrophysics Data System (ADS)

    Schmalzer, Andrew; Tappan, Bryce; Bowden, Patrick; Manner, Virginia; Clements, Brad; Menikoff, Ralph; Ionita, Axinte; Branch, Brittany; Dattelbaum, Dana; Espy, Michelle; Patterson, Brian; Wu, Ruilian; Mueller, Alexander

    2017-06-01

    The effect of structure in explosives has long been a subject of interest to explosives engineers and scientists. Through structure, detonation dynamics in explosives can be manipulated, introducing a new level of safety and directed performance into these previously difficult to control materials. New advances in additive manufacturing (AM) allow the deliberate introduction of exact internal structures at dimensions approaching the mesoscale of these energetic materials. We show through simulation and experiment that this structure can be used to control detonation behavior by manipulating complex shockwave interactions. We use high-speed video and shorting mag-wires to determine the detonation velocity in AM generated explosive structures, demonstrating, for the first time, a method of controlling the directional propagation of reactive flow through the controlled introduction of structure within a high explosive. With ongoing improvement in the AM methods available coupled with guidance through modeling and simulations, more complex interactions are being explored. LANL LDRD Office.

  3. Workshop on Design Loads for Advanced Fighters: Meeting of the Structures and Materials Panel of AGARD (64th) Held in Madrid (Spain) on 27 April-1 May 1987.

    DTIC Science & Technology

    1988-02-01

    capabilities at the start of a programme. ,Z _ 1. Introduction The flight manoeuvre loads are major design criteria for agile aircraft (aerobatic...E. Van Patten, Ph.D. Armstrong Aerospace Medical Research Laboratory Wright-Patterson AFB, OH 45433-6573 USA INTRODUCTION ~ urrent Fighter...anticipated usage. Also, compliance with each condition mit he verified by analysis, model test, or full scale measurement. INTRODUCTION During the

  4. Heat-affected zone and phase composition of 0.09 C-2 Mn-1 Si-Fe steel depending on welding technique

    NASA Astrophysics Data System (ADS)

    Popova, Natalya; Ozhiganov, Eugeniy; Nikonenko, Elena; Ababkov, Nikolay; Smirnov, Aleksander; Koneva, Nina

    2017-11-01

    The paper presents the transmission electron microscopy (TEM) investigations of the structure and phase composition of the heat-affected zone (HAZ) in welded joint modified by four types of welding, namely: electrode welding and electropercussive welding both with and without the introduction of artificial flaws. Artificial flows are aluminum pieces. TEM investigations are carried out within HAZ between the deposited and base metal at 1 mm distance to the latter. The type 0.09C-2Mn-1Si-Fe steel is used as weld material. It is shown that the welding process has an effect on the material morphology, phase composition, faulted structure and its parameters. Long-range stresses are divided into plastic and elastic components. It is demonstrated that the type of welding does not change the structural quality of welded joint represented by perlite and ferrite as contrasted with their volume fraction. According to observations, any type of welding with the introduction of artificial flaws results in the destruction of perlite. Polarization of the dislocation structure occurs. The amplitude of mean internal stresses does not practically depend on the welding type. It is shown that the introduction of artificial flaws both during electrode and electropercussive welding reduce the quantitative parameters of the faulted structure.

  5. A prospective interrupted time series study of interventions to improve the quality, rating, framing and structure of goal-setting in community-based brain injury rehabilitation.

    PubMed

    Hassett, Leanne; Simpson, Grahame; Cotter, Rachel; Whiting, Diane; Hodgkinson, Adeline; Martin, Diane

    2015-04-01

    To investigate whether the introduction of an electronic goals system followed by staff training improved the quality, rating, framing and structure of goals written by a community-based brain injury rehabilitation team. Interrupted time series design. Two interventions were introduced six months apart. The first intervention comprised the introduction of an electronic goals system. The second intervention comprised a staff goal training workshop. An audit protocol was devised to evaluate the goals. A random selection of goal statements from the 12 months prior to the interventions (Time 1 baseline) were compared with all goal statements written after the introduction of the electronic goals system (Time 2) and staff training (Time 3). All goals were de-identified for client and time-period, and randomly ordered. A total of 745 goals (Time 1 n = 242; Time 2 n = 283; Time 3 n = 220) were evaluated. Compared with baseline, the introduction of the electronic goals system alone significantly increased goal rating, framing and structure (χ(2) tests 144.7, 18.9, 48.1, respectively, p < 0.001). The addition of staff training meant that the improvement in goal quality, which was only a trend at Time 2, was statistically significant at Time 3 (χ(2) 15.0, p ≤ 001). The training also led to a further significant increase in the framing and structuring of goals over the electronic goals system (χ(2) 11.5, 12.5, respectively, p ≤ 0.001). An electronic goals system combined with staff training improved the quality, rating, framing and structure of goal statements. © The Author(s) 2014.

  6. Estimation of the efficiency of the introduction of a porous layer into a silicon-on-sapphire structure substrate to enhance the reliability of devices under irradiation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Aleksandrov, P. A., E-mail: Alexandrov-PA@nrcki.ru; Baranova, E. K.; Budaragin, V. V.

    2016-08-15

    We investigate the efficiency of the introduction of a porous layer into the substrate of a silicon-onsapphire structure by the implantation of He ions to enhance the radiation resistance of devices. The properties of the introduced layer and its parameters affecting the concentration of minority charge carriers generated by irradiation are analyzed. The reported results of the analysis and calculations can be used to optimize He-ion implantation conditions during the formation of a porous layer.

  7. The Structures of Life

    ERIC Educational Resources Information Center

    National Institute of General Medical Sciences (NIGMS), 2007

    2007-01-01

    This booklet reveals how structural biology provides insight into health and disease and is useful in developing new medications. It contains a general introduction to proteins, coverage of the techniques used to determine protein structures, and a chapter on structure-based drug design. The booklet features "Student Snapshots," designed to…

  8. Introduction to Film.

    ERIC Educational Resources Information Center

    Burns, Gary

    There are numerous ways to structure the introduction to film course so as to meet the needs of the different types of students who typically enroll. Assuming there is no production component in the course, the teacher is left with two major approaches to choose from--historical and aesthetic. The units in the course will typically be built around…

  9. Non-native fish introductions and the reversibility of amphibian declines in the Sierra Nevada

    Treesearch

    Roland A. Knapp

    2004-01-01

    Amphibians are declining worldwide for a variety of reasons, including habitat alteration, introduction of non-native species, disease, climate change, and environmental contaminants. Amphibians often play important roles in structuring ecosystems, and, as a result, amphibian population declines or extinctions are likely to affect other trophic levels (Matthews and...

  10. An Introduction to Graphene and Carbon Nanotubes John Edward Proctor, Daniel Alfonso Melendrez Armada, and Aravind Vijayaraghavan

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Devanathan, Ram

    There is growing scientific interest in graphene because of its potential applications in a variety of energy and environmental technologies. This book provides a good introduction to the structure, properties, synthesis and applications of graphene and carbon nanotubes. The volume has twelve chapters and three appendices.

  11. Masonry Specialist I & II, 3-19. Military Curriculum Materials for Vocational and Technical Education.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. National Center for Research in Vocational Education.

    These military-developed curriculum materials consist of a course description, plan of instruction, study guides, and workbooks for use in training masonry specialists. Covered in the course blocks are an introduction to masonry and rigid concrete structures. The introduction to masonry, course block I, deals with safety, mathematics and…

  12. Computer-Based National Information Systems. Technology and Public Policy Issues.

    ERIC Educational Resources Information Center

    Congress of the U.S., Washington, DC. Office of Technology Assessment.

    A general introduction to computer based national information systems, and the context and basis for future studies are provided in this report. Chapter One, the introduction, summarizes computers and information systems and their relation to society, the structure of information policy issues, and public policy issues. Chapter Two describes the…

  13. An Assessment of Reliability and Validity of a Rubric for Grading APA-Style Introductions

    ERIC Educational Resources Information Center

    Stellmack, Mark A.; Konheim-Kalkstein, Yasmine L.; Manor, Julia E.; Massey, Abigail R.; Schmitz, Julie Ann P.

    2009-01-01

    This article describes the empirical evaluation of the reliability and validity of a grading rubric for grading APA-style introductions of undergraduate students. Levels of interrater agreement and intrarater agreement were not extremely high but were similar to values reported in the literature for comparably structured rubrics. Rank-order…

  14. Introduction to Atomic Structure: Demonstrations and Labs.

    ERIC Educational Resources Information Center

    Ciparick, Joseph D.

    1988-01-01

    Demonstrates a variety of electrical phenomena to help explain atomic structure. Topics include: establishing electrical properties, electrochemistry, and electrostatic charges. Recommends demonstration equipment needed and an explanation of each. (MVL)

  15. Method for facilitating the introduction of material into cells

    DOEpatents

    Holcomb, David E.; McKnight, Timothy E.

    2000-01-01

    The present invention is a method for creating a localized disruption within a boundary of a cell or structure by exposing a boundary of a cell or structure to a set of energetically charged particles while regulating the energy of the charged particles so that the charged particles have an amount of kinetic energy sufficient to create a localized disruption within an area of the boundary of the cell or structure, then upon creation of the localized disruption, the amount of kinetic energy decreases to an amount insufficient to create further damage within the cell or structure beyond the boundary. The present invention is also a method for facilitating the introduction of a material into a cell or structure using the same methodology then further exciting the area of the boundary of the cell or structure where the localized disruption was created so to create a localized temporary opening within the boundary then further introducing the material through the temporary opening into the cell or structure.

  16. An Interactive Introduction to Protein Structure

    ERIC Educational Resources Information Center

    Lee, W. Theodore

    2004-01-01

    To improve student understanding of protein structure and the significance of noncovalent interactions in protein structure and function, students are assigned a project to write a paper complemented with computer-generated images. The assignment provides an opportunity for students to select a protein structure that is of interest and detail…

  17. Application of Wikis with Scaffolding Structure in Laboratory Reporting

    ERIC Educational Resources Information Center

    Ge, Changfeng

    2012-01-01

    This work demonstrates how a Wiki can be mapped into different learning stages during group-based lab reporting via an adequate scaffolding structure. The scaffolding structure of the Wiki-based group report is comprised of six constructs in sequence: Appendix, Methods, Results, Analysis, Introduction and Conclusion. The scaffolding structure was…

  18. Materials Substitution and Recycling. Proceedings of the Meeting of the Structures and Materials Panel (57th) Held at Vimeiro, Portugal on 14-19 October 1983.

    DTIC Science & Technology

    1984-04-01

    34Substitution et Recyclage die Mattrisux Hautes Tinpiraturic- Ar. r T~I __ T-71 01t -Jo PREFACE IM Rdeence SESSION I - INTRODUCTION THE NATURE OF THE...hafnium, manganese, niobium, titanium, tungsten and vanadium are all considered to a degree a! risk. 1. INTRODUCTION Much simplistic polemic has...action is improved scrap separation at all steps of the material cycle. The influence of no-scrap-technologies is discussed. 1. INTRODUCTION The

  19. Evaluation of introduction of the Haemophilus influenzae vaccine in Côte d’Ivoire

    PubMed

    Yohou, Kévin Sylvestre; Aka, Nicaise Lepri; Noufe, Soualihou; Douba, Alfred; Assi Assi, Bernard; Dagnan, Simplice N Cho

    2016-11-25

    Introduction: Côte d’Ivoire introduced the Haemophilus influenzae type b vaccine into the EPI in March 2009. Following this introduction, an evaluation was conducted in 2012 in order to evaluate the vaccine introduction process. Methods: Data collection methods consisted of document review, structured interviews and direct observation. This study collected information from six health region officials, 12 health districts and 36 healthcare institutions. Seventy-two mothers or child carers were also interviewed. Collected data were processed and analysed by Excel, Epi Info and SPSS. Results: A vaccine introduction plan was developed, but was not communicated at the operational level. The planned training for district health care providers was conducted eighteen months after introduction of the vaccine. None of the vaccinating centres had communication support about the new vaccine. Temperature recording was regularly performed in 92% of district deposits and 68% of vaccinating centres. Deteriorated vaccines were observed in 6% of vaccinating centres. Only 3.5% of parents had been informed about introduction of the vaccine. Increased immunization coverage for the third dose of pentavalent vaccine was observed in one half of health districts. Conclusion: Evaluation of the introduction of Haemophilus influenzae type b vaccine highlightsthe strengths and weaknesses of the health system and provides lessons for the introduction of other vaccines into the expanded programme on immunization.

  20. Nuclear and Chloroplast Microsatellites Show Multiple Introductions in the Worldwide Invasion History of Common Ragweed, Ambrosia artemisiifolia

    PubMed Central

    Gaudeul, Myriam; Giraud, Tatiana; Kiss, Levente; Shykoff, Jacqui A.

    2011-01-01

    Background Ambrosia artemisiifolia is a North American native that has become one of the most problematic invasive plants in Europe and Asia. We studied its worldwide population genetic structure, using both nuclear and chloroplast microsatellite markers and an unprecedented large population sampling. Our goals were (i) to identify the sources of the invasive populations; (ii) to assess whether all invasive populations were founded by multiple introductions, as previously found in France; (iii) to examine how the introductions have affected the amount and structure of genetic variation in Europe; (iv) to document how the colonization of Europe proceeded; (v) to check whether populations exhibit significant heterozygote deficiencies, as previously observed. Principal Findings We found evidence for multiple introductions of A. artemisiifolia, within regions but also within populations in most parts of its invasive range, leading to high levels of diversity. In Europe, introductions probably stem from two different regions of the native area: populations established in Central Europe appear to have originated from eastern North America, and Eastern European populations from more western North America. This may result from differential commercial exchanges between these geographic regions. Our results indicate that the expansion in Europe mostly occurred through long-distance dispersal, explaining the absence of isolation by distance and the weak influence of geography on the genetic structure in this area in contrast to the native range. Last, we detected significant heterozygote deficiencies in most populations. This may be explained by partial selfing, biparental inbreeding and/or a Wahlund effect and further investigation is warranted. Conclusions This insight into the sources and pathways of common ragweed expansion may help to better understand its invasion success and provides baseline data for future studies on the evolutionary processes involved during range expansion in novel environments. PMID:21423697

  1. Motivation within Role-Playing as a Means to Intensify College Students' Educational Activity

    ERIC Educational Resources Information Center

    Burenkova, Olga Mikhailovna; Arkhipova, Irina Vladimirovna; Semenov, Sergei Aleksandrovich; Samarenkina, Saniya Zakirzyanovna

    2015-01-01

    This article covers college students' educational activity issues while studying a foreign language; analyzes special aspects of motivation introduction, their specific features. It also defines role and structure of role-playing. The authors come to the conclusion that introduction of role-playing in an educational process will bring it closer to…

  2. Curriculum Outline for Introduction to Engineering Chemistry. Second Edition. Review Cycle-Annual.

    ERIC Educational Resources Information Center

    Schlenker, Richard M.

    Introduction to Engineering Chemistry is a four-credit hour (one semester) course designed to introduce marine engineering students to the rudiments of basic (introductory) inorganic chemistry. The course consists of 18 units (numbered 1.0 through 18.0) focusing on these subject areas: fundamental concepts; structure of the atom and the periodic…

  3. Optical versus Virtual: Teaching Assistant Perceptions of the Use of Virtual Microscopy in an Undergraduate Human Anatomy Course

    ERIC Educational Resources Information Center

    Collier, Larissa; Dunham, Stacey; Braun, Mark W.; O'Loughlin, Valerie Dean

    2012-01-01

    Many studies that evaluate the introduction of technology in the classroom focus on student performance and student evaluations. This study focuses on instructor evaluation of the introduction of virtual microscopy into an undergraduate anatomy class. Semi-structured interviews were conducted with graduate teaching assistants (TA) and analyzed…

  4. Introduction to multifractal detrended fluctuation analysis in matlab.

    PubMed

    Ihlen, Espen A F

    2012-01-01

    Fractal structures are found in biomedical time series from a wide range of physiological phenomena. The multifractal spectrum identifies the deviations in fractal structure within time periods with large and small fluctuations. The present tutorial is an introduction to multifractal detrended fluctuation analysis (MFDFA) that estimates the multifractal spectrum of biomedical time series. The tutorial presents MFDFA step-by-step in an interactive Matlab session. All Matlab tools needed are available in Introduction to MFDFA folder at the website www.ntnu.edu/inm/geri/software. MFDFA are introduced in Matlab code boxes where the reader can employ pieces of, or the entire MFDFA to example time series. After introducing MFDFA, the tutorial discusses the best practice of MFDFA in biomedical signal processing. The main aim of the tutorial is to give the reader a simple self-sustained guide to the implementation of MFDFA and interpretation of the resulting multifractal spectra.

  5. Introduction to Multifractal Detrended Fluctuation Analysis in Matlab

    PubMed Central

    Ihlen, Espen A. F.

    2012-01-01

    Fractal structures are found in biomedical time series from a wide range of physiological phenomena. The multifractal spectrum identifies the deviations in fractal structure within time periods with large and small fluctuations. The present tutorial is an introduction to multifractal detrended fluctuation analysis (MFDFA) that estimates the multifractal spectrum of biomedical time series. The tutorial presents MFDFA step-by-step in an interactive Matlab session. All Matlab tools needed are available in Introduction to MFDFA folder at the website www.ntnu.edu/inm/geri/software. MFDFA are introduced in Matlab code boxes where the reader can employ pieces of, or the entire MFDFA to example time series. After introducing MFDFA, the tutorial discusses the best practice of MFDFA in biomedical signal processing. The main aim of the tutorial is to give the reader a simple self-sustained guide to the implementation of MFDFA and interpretation of the resulting multifractal spectra. PMID:22675302

  6. Matrix Management Structures in Higher Education. Coombe Lodge Working Paper. Information Bank Number 1394.

    ERIC Educational Resources Information Center

    Cuthbert, Rob

    The matrix structure as an alternative to the departmental structure for colleges and universities is discussed, and the matrix system at Middlesex Polytechnic in England is used as illustration. The major impact of the introduction of a matrix structure is its effect on teaching activities within the institution. The matrix structure formally…

  7. ITS logical architecture : traceability matrix.

    DOT National Transportation Integrated Search

    2003-11-01

    This document provides information to aid in understanding and using the Long-Term Pavement Performance (LTPP) program pavement performance database. This document provides an introduction to the structure of the LTPP program, the relational structur...

  8. Structure formation control of foam concrete

    NASA Astrophysics Data System (ADS)

    Steshenko, Aleksei; Kudyakov, Aleksander; Konusheva, Viktoriya; Syrkin, Oleg

    2017-01-01

    The process of predetermined foam concrete structure formation is considered to be a crucial issue from the point of process control and it is currently understudied thus defining the need for additional research. One of the effective ways of structure formation control in naturally hardening foam concrete is reinforcement with dispersed fibers or introduction of plasticizers. The paper aims at studying the patterns of influence of microreinforcing and plasticizing additives on the structure and performance properties of foam concrete. Preparation of foam concrete mix has been conducted using one-step technology. The structure of modified foam concrete has been studied by means of electron microscopy. The cellular structure of foam concrete samples with the additives is homogeneous; the pores are uniformly distributed over the total volume. It has been revealed that introduction of the Neolas 5.2 plasticizer and microreinforcing fibers in the foam concrete mixture in the amount of 0.4 - 0.1 % by weight of cement leads to reduction of the average pore diameter in the range of 45.3 to 30.2 microns and the standard deviation of the pore average diameter from 23.6 to 9.2 in comparison with the sample without additive. Introduction of modifying additives has stimulated formation of a large number of closed pores. Thus porosity of conditionally closed pores has increased from 16.06 % to 34.48 %, which has lead to increase of frost resistance brand of foam concrete from F15 to F50 and to reduction of its water absorption by weight by 20 %.

  9. Spatial dynamics of invasion: the geometry of introduced species.

    PubMed

    Korniss, Gyorgy; Caraco, Thomas

    2005-03-07

    Many exotic species combine low probability of establishment at each introduction with rapid population growth once introduction does succeed. To analyse this phenomenon, we note that invaders often cluster spatially when rare, and consequently an introduced exotic's population dynamics should depend on locally structured interactions. Ecological theory for spatially structured invasion relies on deterministic approximations, and determinism does not address the observed uncertainty of the exotic-introduction process. We take a new approach to the population dynamics of invasion and, by extension, to the general question of invasibility in any spatial ecology. We apply the physical theory for nucleation of spatial systems to a lattice-based model of competition between plant species, a resident and an invader, and the analysis reaches conclusions that differ qualitatively from the standard ecological theories. Nucleation theory distinguishes between dynamics of single- and multi-cluster invasion. Low introduction rates and small system size produce single-cluster dynamics, where success or failure of introduction is inherently stochastic. Single-cluster invasion occurs only if the cluster reaches a critical size, typically preceded by a number of failed attempts. For this case, we identify the functional form of the probability distribution of time elapsing until invasion succeeds. Although multi-cluster invasion for sufficiently large systems exhibits spatial averaging and almost-deterministic dynamics of the global densities, an analytical approximation from nucleation theory, known as Avrami's law, describes our simulation results far better than standard ecological approximations.

  10. Multiple introductions boosted genetic diversity in the invasive range of black cherry (Prunus serotina; Rosaceae)

    PubMed Central

    Pairon, Marie; Petitpierre, Blaise; Campbell, Michael; Guisan, Antoine; Broennimann, Olivier; Baret, Philippe V.; Jacquemart, Anne-Laure; Besnard, Guillaume

    2010-01-01

    Background and Aims Black cherry (Prunus serotina) is a North American tree that is rapidly invading European forests. This species was introduced first as an ornamental plant then it was massively planted by foresters in many countries but its origins and the process of invasion remain poorly documented. Based on a genetic survey of both native and invasive ranges, the invasion history of black cherry was investigated by identifying putative source populations and then assessing the importance of multiple introductions on the maintenance of gene diversity. Methods Genetic variability and structure of 23 populations from the invasive range and 22 populations from the native range were analysed using eight nuclear microsatellite loci and five chloroplast DNA regions. Key Results Chloroplast DNA diversity suggests there were multiple introductions from a single geographic region (the north-eastern United States). A low reduction of genetic diversity was observed in the invasive range for both nuclear and plastid genomes. High propagule pressure including both the size and number of introductions shaped the genetic structure in Europe and boosted genetic diversity. Populations from Denmark, The Netherlands, Belgium and Germany showed high genetic diversity and low differentiation among populations, supporting the hypothesis that numerous introduction events, including multiple individuals and exchanges between sites, have taken place during two centuries of plantation. Conclusions This study postulates that the invasive black cherry has originated from east of the Appalachian Mountains (mainly the Allegheny plateau) and its invasiveness in north-western Europe is mainly due to multiple introductions containing high numbers of individuals. PMID:20400456

  11. Reward-Modulated Hebbian Plasticity as Leverage for Partially Embodied Control in Compliant Robotics

    PubMed Central

    Burms, Jeroen; Caluwaerts, Ken; Dambre, Joni

    2015-01-01

    In embodied computation (or morphological computation), part of the complexity of motor control is offloaded to the body dynamics. We demonstrate that a simple Hebbian-like learning rule can be used to train systems with (partial) embodiment, and can be extended outside of the scope of traditional neural networks. To this end, we apply the learning rule to optimize the connection weights of recurrent neural networks with different topologies and for various tasks. We then apply this learning rule to a simulated compliant tensegrity robot by optimizing static feedback controllers that directly exploit the dynamics of the robot body. This leads to partially embodied controllers, i.e., hybrid controllers that naturally integrate the computations that are performed by the robot body into a neural network architecture. Our results demonstrate the universal applicability of reward-modulated Hebbian learning. Furthermore, they demonstrate the robustness of systems trained with the learning rule. This study strengthens our belief that compliant robots should or can be seen as computational units, instead of dumb hardware that needs a complex controller. This link between compliant robotics and neural networks is also the main reason for our search for simple universal learning rules for both neural networks and robotics. PMID:26347645

  12. Introduction to bioinformatics.

    PubMed

    Can, Tolga

    2014-01-01

    Bioinformatics is an interdisciplinary field mainly involving molecular biology and genetics, computer science, mathematics, and statistics. Data intensive, large-scale biological problems are addressed from a computational point of view. The most common problems are modeling biological processes at the molecular level and making inferences from collected data. A bioinformatics solution usually involves the following steps: Collect statistics from biological data. Build a computational model. Solve a computational modeling problem. Test and evaluate a computational algorithm. This chapter gives a brief introduction to bioinformatics by first providing an introduction to biological terminology and then discussing some classical bioinformatics problems organized by the types of data sources. Sequence analysis is the analysis of DNA and protein sequences for clues regarding function and includes subproblems such as identification of homologs, multiple sequence alignment, searching sequence patterns, and evolutionary analyses. Protein structures are three-dimensional data and the associated problems are structure prediction (secondary and tertiary), analysis of protein structures for clues regarding function, and structural alignment. Gene expression data is usually represented as matrices and analysis of microarray data mostly involves statistics analysis, classification, and clustering approaches. Biological networks such as gene regulatory networks, metabolic pathways, and protein-protein interaction networks are usually modeled as graphs and graph theoretic approaches are used to solve associated problems such as construction and analysis of large-scale networks.

  13. The Structures of Life.

    ERIC Educational Resources Information Center

    National Inst. of General Medical Sciences (NIH), Bethesda, MD.

    This booklet, geared toward an advanced high school or early college-level audience, explains how structural biology provides insight into health and disease and is useful in developing new medications. This publication contains a general introduction to proteins, coverage of the techniques used to determine protein structures, and a chapter on…

  14. The effects of sudden oak death on foliar moisture content and crown fire potential in tanoak

    Treesearch

    H. Kuljian; J.M. Varner

    2010-01-01

    The introduction of non-native pathogens can have profound effects on forest ecosystems resulting in loss of species, changes in species composition, and altered fuel structure. The introduction of Phytophthora ramorum, the pathogen recognized as causing Sudden Oak Death (SOD), leads to rapid decline and mortality of tanoak (Lithocarpus densiflorus) in forests of...

  15. Changing School Autonomy: Academy Schools and Their Introduction to England's Education. CEE DP 123

    ERIC Educational Resources Information Center

    Machin, Stephen; Vernoit, James

    2011-01-01

    In this paper, we study a high profile case--the introduction of academy schools into the English secondary school sector--that has allowed schools to gain more autonomy and flexible governance by changing their school structure. We consider the impact of an academy school conversion on their pupil intake and pupil performance and possible…

  16. Genetic Diversity in Introduced Golden Mussel Populations Corresponds to Vector Activity

    PubMed Central

    Ghabooli, Sara; Zhan, Aibin; Sardiña, Paula; Paolucci, Esteban; Sylvester, Francisco; Perepelizin, Pablo V.; Briski, Elizabeta; Cristescu, Melania E.; MacIsaac, Hugh J.

    2013-01-01

    We explored possible links between vector activity and genetic diversity in introduced populations of Limnoperna fortunei by characterizing the genetic structure in native and introduced ranges in Asia and South America. We surveyed 24 populations: ten in Asia and 14 in South America using the mitochondrial cytochrome c oxidase subunit I (COI) gene, as well as eight polymorphic microsatellite markers. We performed population genetics and phylogenetic analyses to investigate population genetic structure across native and introduced regions. Introduced populations in Asia exhibit higher genetic diversity (H E = 0.667–0.746) than those in South America (H E = 0.519–0.575), suggesting higher introduction effort for the former populations. We observed pronounced geographical structuring in introduced regions, as indicated by both mitochondrial and nuclear markers based on multiple genetic analyses including pairwise ФST, F ST, Bayesian clustering method, and three-dimensional factorial correspondence analyses. Pairwise F ST values within both Asia (F ST = 0.017–0.126, P = 0.000–0.009) and South America (F ST = 0.004–0.107, P = 0.000–0.721) were lower than those between continents (F ST = 0.180–0.319, P = 0.000). Fine-scale genetic structuring was also apparent among introduced populations in both Asia and South America, suggesting either multiple introductions of distinct propagules or strong post-introduction selection and demographic stochasticity. Higher genetic diversity in Asia as compared to South America is likely due to more frequent propagule transfers associated with higher shipping activities between source and donor regions within Asia. This study suggests that the intensity of human-mediated introduction vectors influences patterns of genetic diversity in non-indigenous species. PMID:23533614

  17. Loss of functional diversity and network modularity in introduced plant–fungal symbioses

    PubMed Central

    Cooper, Jerry A.; Bufford, Jennifer L.; Hulme, Philip E.; Bates, Scott T.

    2017-01-01

    The introduction of alien plants into a new range can result in the loss of co-evolved symbiotic organisms, such as mycorrhizal fungi, that are essential for normal plant physiological functions. Prior studies of mycorrhizal associations in alien plants have tended to focus on individual plant species on a case-by-case basis. This approach limits broad scale understanding of functional shifts and changes in interaction network structure that may occur following introduction. Here we use two extensive datasets of plant–fungal interactions derived from fungal sporocarp observations and recorded plant hosts in two island archipelago nations: New Zealand (NZ) and the United Kingdom (UK). We found that the NZ dataset shows a lower functional diversity of fungal hyphal foraging strategies in mycorrhiza of alien when compared with native trees. Across species this resulted in fungal foraging strategies associated with alien trees being much more variable in functional composition compared with native trees, which had a strikingly similar functional composition. The UK data showed no functional difference in fungal associates of alien and native plant genera. Notwithstanding this, both the NZ and UK data showed a substantial difference in interaction network structure of alien trees compared with native trees. In both cases, fungal associates of native trees showed strong modularity, while fungal associates of alien trees generally integrated into a single large module. The results suggest a lower functional diversity (in one dataset) and a simplification of network structure (in both) as a result of introduction, potentially driven by either limited symbiont co-introductions or disruption of habitat as a driver of specificity due to nursery conditions, planting, or plant edaphic-niche expansion. Recognizing these shifts in function and network structure has important implications for plant invasions and facilitation of secondary invasions via shared mutualist populations. PMID:28039116

  18. Recent Advances in Long Range and Long Endurance Operation of Aircraft (Les Progres Recents dans le Domaine des Operations Aeriennes a Longue Distance et de Longdue Duree)

    DTIC Science & Technology

    1993-11-01

    REPORT by F. MARY 23, Rue de la Croix du Val F-92190 MEUDON FRANCE 1. SUMMARY 3. INTRODUCTION This report reviews the lectures presented at the The...the aircraft drove the design to a stiffness critical structure. INTRODUCTION : During the late eighties and early nineties a number of government...at all with any other existing means. terms of payload and endurance. 3.1.1 Earth monitoring 2. Introduction In this role HALE-UMA aircraft can be

  19. The Internship Report.

    ERIC Educational Resources Information Center

    Corey, Jim; Killingsworth, M. Jimmie

    1987-01-01

    Recommends a four-part structure for retrospective internship reports: (1) introduction, (2) narrative, (3) analysis and evaluation, and (4) appendix. Advises teachers to present the report form to the student before the internship begins to add structure to the internship experience. (SKC)

  20. Enrollment Management: An Introduction to Concepts and Structures

    ERIC Educational Resources Information Center

    Bontrager, Bob

    2004-01-01

    In the increasingly complex world of managing enrollments, success or failure hinges on building a solid foundation of concepts, structures, and strategies. This first of a two-part series reviews the core concepts and structural considerations that underlie successful enrollment management organizations. The purpose of this article is to…

  1. Technologies for Future Precision Strike Missile Systems - Missile Aeromechanics Technology

    DTIC Science & Technology

    2001-07-01

    structure materials, composite structure materials, hypersonic insulation materials, multi-spectral domes, and reduced parts count structure. Introduction...high control effectiveness. An inherent disadvantage of a forward swept surface is increased potential for aeroelastic instability. Composite structure...is synergistic with forward swept surfaces because the higher stiffness of composites mitigates aeroelastic instability. Composite material may also

  2. Control of interfacial properties of Pr-oxide/Ge gate stack structure by introduction of nitrogen

    NASA Astrophysics Data System (ADS)

    Kato, Kimihiko; Kondo, Hiroki; Sakashita, Mitsuo; Nakatsuka, Osamu; Zaima, Shigeaki

    2011-06-01

    We have demonstrated the control of interfacial properties of Pr-oxide/Ge gate stack structure by the introduction of nitrogen. From C- V characteristics of Al/Pr-oxide/Ge 3N 4/Ge MOS capacitors, the interface state density decreases without the change of the accumulation capacitance after annealing. The TEM and TED measurements reveal that the crystallization of Pr-oxide is enhanced with annealing and the columnar structure of cubic-Pr 2O 3 is formed after annealing. From the depth profiles measured using XPS with Ar sputtering for the Pr-oxide/Ge 3N 4/Ge stack structure, the increase in the Ge component is not observed in a Pr-oxide film and near the interface between a Pr-oxide film and a Ge substrate. In addition, the N component segregates near the interface region, amorphous Pr-oxynitride (PrON) is formed at the interface. As a result, Pr-oxide/PrON/Ge stacked structure without the Ge-oxynitride interlayer is formed.

  3. The RCSB PDB “Molecule of the Month”: Inspiring a Molecular View of Biology

    PubMed Central

    Goodsell, David S.; Dutta, Shuchismita; Zardecki, Christine; Voigt, Maria; Berman, Helen M.; Burley, Stephen K.

    2015-01-01

    The Research Collaboratory for Structural Bioinformatics (RCSB) Molecule of the Month series provides a curated introduction to the 3-D biomolecular structures available in the Protein Data Bank archive and the tools that are available at the RCSB website for accessing and exploring them. A variety of educational materials, such as articles, videos, posters, hands-on activities, lesson plans, and curricula, build on this series for use in a variety of educational settings as a general introduction to key topics, such as enzyme action, protein synthesis, and viruses. The series and associated educational materials are freely available at www.rcsb.org. PMID:25942442

  4. The RCSB PDB "Molecule of the Month": Inspiring a Molecular View of Biology.

    PubMed

    Goodsell, David S; Dutta, Shuchismita; Zardecki, Christine; Voigt, Maria; Berman, Helen M; Burley, Stephen K

    2015-05-01

    The Research Collaboratory for Structural Bioinformatics (RCSB) Molecule of the Month series provides a curated introduction to the 3-D biomolecular structures available in the Protein Data Bank archive and the tools that are available at the RCSB website for accessing and exploring them. A variety of educational materials, such as articles, videos, posters, hands-on activities, lesson plans, and curricula, build on this series for use in a variety of educational settings as a general introduction to key topics, such as enzyme action, protein synthesis, and viruses. The series and associated educational materials are freely available at www.rcsb.org.

  5. Exploring the Development of Competence in Lean Management through Action Learning Groups: A Study of the Introduction of Lean to a Facilities Management Function

    ERIC Educational Resources Information Center

    Wyton, Paul; Payne, Robin

    2014-01-01

    The introduction of a Lean approach to management requires the development of understanding and capability. This in turn requires a structured training intervention and other supporting activities. This paper explores, through a case study, the way in which action learning groups (ALGs) supported the development of Lean capabilities in the…

  6. Quinolone-based IMPDH inhibitors: introduction of basic residues on ring D and SAR of the corresponding mono, di and benzofused analogues.

    PubMed

    Dhar, T G Murali; Watterson, Scott H; Chen, Ping; Shen, Zhongqi; Gu, Henry H; Norris, Derek; Carlsen, Marianne; Haslow, Kristin D; Pitts, William J; Guo, Junqing; Chorba, John; Fleener, Catherine A; Rouleau, Katherine A; Townsend, Robert; Hollenbaugh, Diane; Iwanowicz, Edwin J

    2003-02-10

    The synthesis and the structure-activity relationships (SAR) of analogues derived from the introduction of basic residues on ring D of quinolone-based inhibitors of IMPDH are described. This led to the identification of compound 27 as a potent inhibitor of IMPDH with significantly improved aqueous solubility over the lead compound 1.

  7. A method for introduction of Al2O3 nanofiber into aluminum alloy

    NASA Astrophysics Data System (ADS)

    Chen, Yijin; Qin, He; Kurganova, Y. A.; Gaaze, V. K.

    2018-04-01

    Experimental samples of aluminum matrix composites (AMCs) reinforced with Al2O3 nanofibers were obtained. In order to increase the wettability in liquid phase combination conditions, it is proposed to use copper powder as a carrier of nanofiber. When studying the structure of the samples, a modifying effect of the introduction of reinforcement, demonstrated by grinding the grain, was revealed.

  8. A Pragmatic Approach to the Macro-Structure and Metadiscoursal Features of Research Article Introductions in the Field of Agricultural Sciences

    ERIC Educational Resources Information Center

    Rubio, M. Milagros del Saz

    2011-01-01

    Using (Swales, 1990) and (Swales, 2004) Create-A-Research-Space model (CARS) as an investigative tool and Hyland's (2005) model of metadiscourse, this article reports on a pragmatic two-level rhetorical analysis of the constituent moves and steps of research article introductions and focuses on the identification and mapping of the metadiscoursal…

  9. Project FOOTPRINT: Substation modeling and simulations for E1 pulses

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Nelson, Scott D.; Larson, D. J.; Kirkendall, B. A.

    This report includes a presentation with an: Introduction to CW coupling; Introduction to single-pulse coupling; Description of E1 waveforms; Structures in a substation yard --articulated (as part of the substation's defined electrical functionality)--unarticulated (not as part of the substation's defined electrical functionality); Coupling --electrical coupling (capacitive coupling) --magnetic coupling (inductive coupling); Connectivity to long-line transmission lines; Control infrastructure; Summary; and References.

  10. Linguistics, Structuralism, and Semiology Approaches to the Cinema With a Bibliography

    ERIC Educational Resources Information Center

    Harpole, Charles H.; Hanhardt, John G.

    1973-01-01

    An introduction to linguistics, structuralism, and semiology, with special emphasis on how these fields affect and can be applied in the study of cinema. The extensive bibliography includes books and articles in five languages. (CH)

  11. Influence of N-Oxide Introduction on the Stability of Nitrogen-Rich Heteroaromatic Rings: A Quantum Chemical Study.

    PubMed

    Yuan, Jia; Long, Xinping; Zhang, Chaoyang

    2016-12-01

    N-Oxidization is an important strategy for enhancing the density and energy of energetic materials. Nevertheless, the influence of N + -O - introduction on molecular stability remains relatively unknown. Thus, the present work comprehensively studied 102 basic N-rich ring structures, including azoles, furazans, and azines, as well as their N-oxides by quantum chemical calculations. The introduction of N + -O - weakens molecular stability in most cases because the process elongates chemical bonds, decreases ring aromaticity, narrows the gaps between the highest occupied and lowest unoccupied molecular orbitals, and increases the photochemical reactivity. Besides, the easy H transfer to the neighboring O atom, which forms a N-OH isomer in azoles, renders the stabilization by N-oxide introduction ineffective. However, N-oxide introduction can enhance the molecular stability of 1,2,3,4-tetrazine-1,3-dioxide and tetrazino-tetrazine 1,3,6,8-tetraoxide by promoting σ-π separation and relieving lone-pair repulsion. Moreover, the alternate arrangement of positive and negative charges is another factor stabilizing the 1,2,3,4-tetrazine ring by 1,3-dioxidation. Finally, we assess the accessibility of N-oxidized azoles and azines by regarding N 2 O and H 2 O 2 as oxidizers. We find that all the oxidations were exothermic, thermodynamically spontaneous, and kinetically feasible. After an overall evaluation, we propose 19 N-oxides as basic structures for high-energy materials with considerable stability.

  12. Investigation of Nonlinear Pressurization and Model Restart in MSC/NASTRAN for Modeling Thin Film Inflatable Structures

    NASA Technical Reports Server (NTRS)

    Smalley, Kurt B.; Tinker, Michael L.; Fischer, Richard T.

    2001-01-01

    This paper is written for the purpose of providing an introduction and set of guidelines for the use of a methodology for NASTRAN eigenvalue modeling of thin film inflatable structures. It is hoped that this paper will spare the reader from the problems and headaches the authors were confronted with during their investigation by presenting here not only an introduction and verification of the methodology, but also a discussion of the problems that this methodology can ensue. Our goal in this investigation was to verify the basic methodology through the creation and correlation of a simple model. An overview of thin film structures, their history, and their applications is given. Previous modeling work is then briefly discussed. An introduction is then given for the method of modeling. The specific mechanics of the method are then discussed in parallel with a basic discussion of NASTRAN s implementation of these mechanics. The problems encountered with the method are then given along with suggestions for their work-a-rounds. The methodology is verified through the correlation between an analytical model and modal test results of a thin film strut. Recommendations are given for the needed advancement of our understanding of this method and ability to accurately model thin film structures. Finally, conclusions are drawn regarding the usefulness of the methodology.

  13. The structural adjustment programme and the elderly in Nigeria.

    PubMed

    Ekpenyong, S

    1995-01-01

    The article analyzes the impact of recent economic changes accompanying the introduction of the Structural Adjustment Programme (SAP) and ongoing cultural styles on the aged in Nigeria. It argues that during the one decade preceding the introduction of SAP in 1986, Nigeria experienced significant social and economic transformations made possible by the rise in oil prices in the 1970s. The introduction of SAP has also been accompanied by significant social, cultural, and economic changes. Here the effects of these changes on the situation of the elderly in Nigeria are examined using data pooled from observations and surveys in both the pre- and post-SAP years. Findings reveal that compared to the younger generations, the relative position of the elderly has not changed significantly, although the latter's position has deteriorated on dimensions such as access to economic and health resources. Regional and individual differentials in the situation of old people are significant during both the pre- and post-SAP era.

  14. Integral blow moulding for cycle time reduction of CFR-TP aluminium contour joint processing

    NASA Astrophysics Data System (ADS)

    Barfuss, Daniel; Würfel, Veit; Grützner, Raik; Gude, Maik; Müller, Roland

    2018-05-01

    Integral blow moulding (IBM) as a joining technology of carbon fibre reinforced thermoplastic (CFR-TP) hollow profiles with metallic load introduction elements enables significant cycle time reduction by shortening of the process chain. As the composite part is joined to the metallic part during its consolidation process subsequent joining steps are omitted. In combination with a multi-scale structured load introduction element its form closure function enables to pass very high loads and is capable to achieve high degrees of material utilization. This paper first shows the process set-up utilizing thermoplastic tape braided preforms and two-staged press and internal hydro formed load introduction elements. Second focuses on heating technologies and process optimization. Aiming at cycle time reduction convection and induction heating in regard to the resulting product quality is inspected by photo micrographs and computer tomographic scans. Concluding remarks give final recommendations for the process design in regard to the structural design.

  15. Applications of artificial neural nets in structural mechanics

    NASA Technical Reports Server (NTRS)

    Berke, Laszlo; Hajela, Prabhat

    1990-01-01

    A brief introduction to the fundamental of Neural Nets is given, followed by two applications in structural optimization. In the first case, the feasibility of simulating with neural nets the many structural analyses performed during optimization iterations was studied. In the second case, the concept of using neural nets to capture design expertise was studied.

  16. Applications of artificial neural nets in structural mechanics

    NASA Technical Reports Server (NTRS)

    Berke, L.; Hajela, P.

    1992-01-01

    A brief introduction to the fundamental of Neural Nets is given, followed by two applications in structural optimization. In the first case, the feasibility of simulating with neural nets the many structural analyses performed during optimization iterations was studied. In the second case, the concept of using neural nets to capture design expertise was studied.

  17. Introduction to Protein Structure through Genetic Diseases

    ERIC Educational Resources Information Center

    Schneider, Tanya L.; Linton, Brian R.

    2008-01-01

    An illuminating way to learn about protein function is to explore high-resolution protein structures. Analysis of the proteins involved in genetic diseases has been used to introduce students to protein structure and the role that individual mutations can play in the onset of disease. Known mutations can be correlated to changes in protein…

  18. German Basic Course. Volume II, Lessons 16-25. Revised.

    ERIC Educational Resources Information Center

    Defense Language Inst., Monterey, CA.

    This is the second volume of the intermediate phase of the German Basic Course. The objective of the intermediate phase is mastery of the structural elements of the German language. Accordingly, each lesson contains the following elements: (1) introduction of new structure through "structure perception drills"; (2) a basic dialog dealing with a…

  19. General introduction: Liquid and solid (materials, main properties and applications …)

    NASA Astrophysics Data System (ADS)

    Zabler, Simon

    2014-10-01

    A general introduction about the diversity of foam structures is given with focus onto the structural, mechanical and dynamical properties at hand. Two classes of materials are addressed: liquid and semi-solid foams, on the one hand, solid foams, on the other hand. The latter can be subdivided into metallic, ceramic and organic foams, depending on the nature of the solid skeleton that supports the overall cell structure. Solid foams generally stem from the concept of mechanical light-weight structures, but they can just as well be employed for their large surface area as well as for their acoustic and thermal properties. Modern biomaterials use tailored ceramic or organo-ceramic foams as bone scaffolds, whereas hierarchically micro- and nanoporous structures are being used by chemistry to control catalytic reactions. Future materials design and development is going to rely increasingly on natural and synthetic foam structures and properties, be it food, thermal insulators or car frames, thus giving a promising outlook onto the foam research and development that is about to come. xml:lang="fr"

  20. Structured pathology reporting improves the macroscopic assessment of rectal tumour resection specimens.

    PubMed

    King, Simon; Dimech, Margaret; Johnstone, Susan

    2016-06-01

    We examined whether introduction of a structured macroscopic reporting template for rectal tumour resection specimens improved the completeness and efficiency in collecting key macroscopic data elements. Fifty free text (narrative) macroscopic reports retrieved from 2012 to 2014 were compared with 50 structured macroscopic reports from 2013 to 2015, all of which were generated at John Hunter Hospital, Newcastle, NSW. The six standard macroscopic data elements examined in this study were reported in all 50 anatomical pathology reports using a structured macroscopic reporting dictation template. Free text reports demonstrated significantly impaired data collection when recording intactness of mesorectum (p<0.001), relationship to anterior peritoneal reflection (p=0.028) and distance of tumour to the non-peritonealised circumferential margin (p<0.001). The number of words used was also significantly (p<0.001) reduced using pre-formatted structured reports compared to free text reports. The introduction of a structured reporting dictation template improves data collection and may reduce the subsequent administrative burden when macroscopically evaluating rectal resections. Copyright © 2016 Royal College of Pathologists of Australasia. Published by Elsevier B.V. All rights reserved.

  1. Structural Counterfactuals: A Brief Introduction

    ERIC Educational Resources Information Center

    Pearl, Judea

    2013-01-01

    Recent advances in causal reasoning have given rise to a computational model that emulates the process by which humans generate, evaluate, and distinguish counterfactual sentences. Contrasted with the "possible worlds" account of counterfactuals, this "structural" model enjoys the advantages of representational economy,…

  2. An Introduction to Causal Inference

    DTIC Science & Technology

    2009-11-02

    Introduction The questions that motivate most studies in the health, social and behavioral sciences are not associational but causal in nature. For example...what is the efficacy of a given drug in a given population? Whether data can prove an employer guilty of hiring discrimination? What fraction of past...a unifying theory, called “structural,” within which most (if not all) aspects of causation can be formulated, analyzed and compared, thirdly

  3. Genetic structure and invasion history of the house mouse (Mus musculus domesticus) in Senegal, West Africa: a legacy of colonial and contemporary times.

    PubMed

    Lippens, C; Estoup, A; Hima, M K; Loiseau, A; Tatard, C; Dalecky, A; Bâ, K; Kane, M; Diallo, M; Sow, A; Niang, Y; Piry, S; Berthier, K; Leblois, R; Duplantier, J-M; Brouat, C

    2017-08-01

    Knowledge of the genetic make-up and demographic history of invasive populations is critical to understand invasion mechanisms. Commensal rodents are ideal models to study whether complex invasion histories are typical of introductions involving human activities. The house mouse Mus musculus domesticus is a major invasive synanthropic rodent originating from South-West Asia. It has been largely studied in Europe and on several remote islands, but the genetic structure and invasion history of this taxon have been little investigated in several continental areas, including West Africa. In this study, we focussed on invasive populations of M. m. domesticus in Senegal. In this focal area for European settlers, the distribution area and invasion spread of the house mouse is documented by decades of data on commensal rodent communities. Genetic variation at one mitochondrial locus and 16 nuclear microsatellite markers was analysed from individuals sampled in 36 sites distributed across the country. A combination of phylogeographic and population genetics methods showed that there was a single introduction event on the northern coast of Senegal, from an exogenous (probably West European) source, followed by a secondary introduction from northern Senegal into a coastal site further south. The geographic locations of these introduction sites were consistent with the colonial history of Senegal. Overall, the marked microsatellite genetic structure observed in Senegal, even between sites located close together, revealed a complex interplay of different demographic processes occurring during house mouse spatial expansion, including sequential founder effects and stratified dispersal due to human transport along major roads.

  4. STRUCTURE-ACTIVITY RELATIONSHIPS (SARS) AMONG MUTAGENS AND CARCINOGENS: A REVIEW

    EPA Science Inventory

    The review is an introduction to methods for evaluating structure-activity relationships (SARs), and, in particular, to those methods that have been applied to study mutagenicity and carcinogenicity. A brief history and some background material on the earliest attempts to correla...

  5. Contemporary Issues of Occupational Education in Finland.

    ERIC Educational Resources Information Center

    Lasonen, Johanna, Ed.; Stenstrom, Marja-Leena, Ed.

    This book contains 28 papers about the current status of occupational education in Finland, with special emphasis on context factors, structural and pedagogical reform, and quality management. The following papers are included: "Introduction of Educational Structure in Finland" (Johanna Lasonen, Marja-Leena Stenstrom); "Vocational…

  6. Chemical structure and biological activity of the diazepines

    PubMed Central

    Danneberg, P.; Weber, K. H.

    1983-01-01

    1 Since the introduction of chlordiazepoxide and diazepam many diazepines have been developed. Use of these drugs is increasing and considerable knowledge has accumulated about their mechanisms of action. 2 The structural and pharmacological properties of these drugs are surveyed briefly. PMID:6140944

  7. Characteristics of the 2011 Tohoku Tsunami and introduction of two level tsunamis for tsunami disaster mitigation

    PubMed Central

    SATO, Shinji

    2015-01-01

    Characteristics of the 2011 Tohoku Tsunami have been revealed by collaborative tsunami surveys extensively performed under the coordination of the Joint Tsunami Survey Group. The complex behaviors of the mega-tsunami were characterized by the unprecedented scale and the low occurrence frequency. The limitation and the performance of tsunami countermeasures were described on the basis of tsunami surveys, laboratory experiments and numerical analyses. These findings contributed to the introduction of two-level tsunami hazards to establish a new strategy for tsunami disaster mitigation, combining structure-based flood protection designed by the Level-1 tsunami and non-structure-based damage reduction planned by the Level-2 tsunami. PMID:26062739

  8. Characteristics of the 2011 Tohoku Tsunami and introduction of two level tsunamis for tsunami disaster mitigation.

    PubMed

    Sato, Shinji

    2015-01-01

    Characteristics of the 2011 Tohoku Tsunami have been revealed by collaborative tsunami surveys extensively performed under the coordination of the Joint Tsunami Survey Group. The complex behaviors of the mega-tsunami were characterized by the unprecedented scale and the low occurrence frequency. The limitation and the performance of tsunami countermeasures were described on the basis of tsunami surveys, laboratory experiments and numerical analyses. These findings contributed to the introduction of two-level tsunami hazards to establish a new strategy for tsunami disaster mitigation, combining structure-based flood protection designed by the Level-1 tsunami and non-structure-based damage reduction planned by the Level-2 tsunami.

  9. Recent advances in approximation concepts for optimum structural design

    NASA Technical Reports Server (NTRS)

    Barthelemy, Jean-Francois M.; Haftka, Raphael T.

    1991-01-01

    The basic approximation concepts used in structural optimization are reviewed. Some of the most recent developments in that area since the introduction of the concept in the mid-seventies are discussed. The paper distinguishes between local, medium-range, and global approximations; it covers functions approximations and problem approximations. It shows that, although the lack of comparative data established on reference test cases prevents an accurate assessment, there have been significant improvements. The largest number of developments have been in the areas of local function approximations and use of intermediate variable and response quantities. It also appears that some new methodologies are emerging which could greatly benefit from the introduction of new computer architecture.

  10. Fluid control structures in microfluidic devices

    DOEpatents

    Mathies, Richard A.; Grover, William H.; Skelley, Alison; Lagally, Eric; Liu, Chung N.

    2008-11-04

    Methods and apparatus for implementing microfluidic analysis devices are provided. A monolithic elastomer membrane associated with an integrated pneumatic manifold allows the placement and actuation of a variety of fluid control structures, such as structures for pumping, isolating, mixing, routing, merging, splitting, preparing, and storing volumes of fluid. The fluid control structures can be used to implement a variety of sample introduction, preparation, processing, and storage techniques.

  11. Fluid control structures in microfluidic devices

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mathies, Richard A.; Grover, William H.; Skelley, Alison

    2017-05-09

    Methods and apparatus for implementing microfluidic analysis devices are provided. A monolithic elastomer membrane associated with an integrated pneumatic manifold allows the placement and actuation of a variety of fluid control structures, such as structures for pumping, isolating, mixing, routing, merging, splitting, preparing, and storing volumes of fluid. The fluid control structures can be used to implement a variety of sample introduction, preparation, processing, and storage techniques.

  12. Fluid control structures in microfluidic devices

    NASA Technical Reports Server (NTRS)

    Skelley, Alison (Inventor); Mathies, Richard A. (Inventor); Lagally, Eric (Inventor); Grover, William H. (Inventor); Liu, Chung N. (Inventor)

    2008-01-01

    Methods and apparatus for implementing microfluidic analysis devices are provided. A monolithic elastomer membrane associated with an integrated pneumatic manifold allows the placement and actuation of a variety of fluid control structures, such as structures for pumping, isolating, mixing, routing, merging, splitting, preparing, and storing volumes of fluid. The fluid control structures can be used to implement a variety of sample introduction, preparation, processing, and storage techniques.

  13. Durability of Structural Adhesively Bonded System.

    DTIC Science & Technology

    1981-06-01

    Composites , Finite Element Method. II DURABILITY OF STRUCTURAL ADHESIVELY BONDED SYSTEMS TABLE OF CONTENTS 1. Introduction...That investigation was mainly devoted to the temperature effects in time on the mechanical behavior of fiber-reinforced plastic (FRP) composites and...ervironmental-loading history on the mechanical performance of similar FRP composites (which may serve as adherends in structural bcnded systems). That

  14. The Systemic-Structural Theory of Activity: Applications to the Study of Human Work

    ERIC Educational Resources Information Center

    Bedny, Gregory Z.; Harris, Steven Robert

    2005-01-01

    This article offers an introduction to the central concepts and principles of the Systemic-Structural Theory of Activity (SSTA), an activity-theoretical approach specifically tailored to the analysis and design of human work. In activity theory, cognition is understood both as a process and as a structured system of actions. Building on the…

  15. Review of Preliminary Analysis Techniques for Tension Structures.

    DTIC Science & Technology

    1984-02-01

    INTRODUCTION. .. ..... ....... ....... .... 1 1.1 Purpose of Study .. .. ........ ......... 1I 1.2 Motivation for Study . .. ..... ....... ... 2 1.3 Scope...of Study .. .. ....... ........... 5 Chapter 2. MECHANICS OF TENSION STRUCTURES .. ...... ......... 6 2.1 Deployment Phase...Purpose of Study Tension structures are ones in which the main load-carrying members trans- mit applied loads to the foundations or other supporting

  16. Assessing introduction risk using species’ rank-abundance distributions

    PubMed Central

    Chan, Farrah T.; Bradie, Johanna; Briski, Elizabeta; Bailey, Sarah A.; Simard, Nathalie; MacIsaac, Hugh J.

    2015-01-01

    Mixed-species assemblages are often unintentionally introduced into new ecosystems. Analysing how assemblage structure varies during transport may provide insights into how introduction risk changes before propagules are released. Characterization of introduction risk is typically based on assessments of colonization pressure (CP, the number of species transported) and total propagule pressure (total PP, the total abundance of propagules released) associated with an invasion vector. Generally, invasion potential following introduction increases with greater CP or total PP. Here, we extend these assessments using rank-abundance distributions to examine how CP : total PP relationships change temporally in ballast water of ocean-going ships. Rank-abundance distributions and CP : total PP patterns varied widely between trans-Atlantic and trans-Pacific voyages, with the latter appearing to pose a much lower risk than the former. Responses also differed by taxonomic group, with invertebrates experiencing losses mainly in total PP, while diatoms and dinoflagellates sustained losses mainly in CP. In certain cases, open-ocean ballast water exchange appeared to increase introduction risk by uptake of new species or supplementation of existing ones. Our study demonstrates that rank-abundance distributions provide new insights into the utility of CP and PP in characterizing introduction risk. PMID:25473007

  17. Contrasting introduction scenarios among continents in the worldwide invasion of the banana fungal pathogen Mycosphaerella fijiensis.

    PubMed

    Robert, S; Ravigne, V; Zapater, M-F; Abadie, C; Carlier, J

    2012-03-01

    Reconstructing and characterizing introduction routes is a key step towards understanding the ecological and evolutionary factors underlying successful invasions and disease emergence. Here, we aimed to decipher scenarios of introduction and stochastic demographic events associated with the global spread of an emerging disease of bananas caused by the destructive fungal pathogen Mycosphaerella fijiensis. We analysed the worldwide population structure of this fungus using 21 microsatellites and 8 sequence-based markers on 735 individuals from 37 countries. Our analyses designated South-East Asia as the source of the global invasion and supported the location of the centre of origin of M. fijiensis within this area. We confirmed the occurrence of bottlenecks upon introduction into other continents followed by widespread founder events within continents. Furthermore, this study suggested contrasting introduction scenarios of the pathogen between the African and American continents. While potential signatures of admixture resulting from multiple introductions were detected in America, all the African samples examined seem to descend from a single successful founder event. In combination with historical information, our study reveals an original and unprecedented global scenario of invasion for this recently emerging disease caused by a wind-dispersed pathogen. © 2012 Blackwell Publishing Ltd.

  18. Three Essays on Bureaucracy at American Research Universities

    ERIC Educational Resources Information Center

    Taggart, Gabel

    2017-01-01

    The three essays in this dissertation each examine how aspects of contemporary administrative structure within American research universities affect faculty outcomes. Specific aspects of administrative structure tested in this dissertation include the introduction of new administrative roles, administrative intensity (i.e., relative size of…

  19. Molecular modification of coumarin dyes for more efficient dye sensitized solar cells

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sanchez-de-Armas, Rocio; San-Miguel, Miguel A.; Oviedo, Jaime

    2012-05-21

    In this work, new coumarin based dyes for dye sensitized solar cells (DSSC) have been designed by introducing several substituent groups in different positions of the NKX-2311 structure. Two types of substitutions have been considered: the introduction of three electron-donating groups (-OH, -NH{sub 2}, and -OCH{sub 3}) and two different substituents with steric effect: -CH{sub 2}-CH{sub 2}-CH{sub 2}- and -CH{sub 2}-HC=CH-. The electronic absorption spectra (position and width of the first band and absorption threshold) and the position of the LUMO level related to the conduction band have been used as theoretical criteria to evaluate the efficiency of the newmore » dyes. The introduction of a -NH{sub 2} group produces a redshift of the absorption maximum position and the absorption threshold, which could improve the cell efficiency. In contrast, the introduction of -CH{sub 2}-CH{sub 2}-CH{sub 2}- does not modify significantly the electronic structure of NKX-2311, but it might prevent aggregation. Finally, -CH{sub 2}-HC=CH- produces important changes both in the electronic spectrum and in the electronic structure of the dye, and it would be expected as an improvement of cell efficiency for these dyes.« less

  20. The Social Computer

    NASA Astrophysics Data System (ADS)

    Serugendo, Giovanna Di Marzo; Risoldi, Matteo; Solemayni, Mohammad

    The following sections are included: * Introduction * Problem and Research Questions * State of the Art * TSC Structure and Computational Awareness * Methodology and Research Directions * Case Study: Democracy * Conclusions

  1. NASA Tech Briefs, August 2004

    NASA Technical Reports Server (NTRS)

    2004-01-01

    Topics covered include: Data Relay Board with Protocol for High-Speed, Free-Space Optical Communications; Software and Algorithms for Biomedical Image Data Processing and Visualization; Rapid Chemometric Filtering of Spectral Data; Prioritizing Scientific Data for Transmission; Determining Sizes of Particles in a Flow from DPIV Data; Faster Processing for Inverting GPS Occultation Data; FPGA-Based, Self-Checking, Fault-Tolerant Computers; Ultralow-Power Digital Correlator for Microwave Polarimetry; Grounding Headphones for Protection Against ESD; Lightweight Stacks of Direct Methanol Fuel Cells; Highly Efficient Vector-Inversion Pulse Generators; Estimating Basic Preliminary Design Performances of Aerospace Vehicles; Framework for Development of Object-Oriented Software; Analyzing Spacecraft Telecommunication Systems; Collaborative Planning of Robotic Exploration; Tools for Administration of a UNIX-Based Network; Preparing and Analyzing Iced Airfoils; Evaluating Performance of Components; Fuels Containing Methane of Natural Gas in Solution; Direct Electrolytic Deposition of Mats of MnxOy Nanowires; Bubble Eliminator Based on Centrifugal Flow; Inflatable Emergency Atmospheric-Entry Vehicles; Lightweight Deployable Mirrors with Tensegrity Supports; Centrifugal Adsorption Cartridge System; Ultrasonic Apparatus for Pulverizing Brittle Material; Transplanting Retinal Cells using Bucky Paper for Support; Using an Ultrasonic Instrument to Size Extravascular Bubbles; Coronagraphic Notch Filter for Raman Spectroscopy; On-the-Fly Mapping for Calibrating Directional Antennas; Working Fluids for Increasing Capacities of Heat Pipes; Computationally-Efficient Minimum-Time Aircraft Routes in the Presence of Winds; Liquid-Metal-Fed Pulsed Plasma Thrusters; Personal Radiation Protection System; and Attitude Control for a Solar-Sail Spacecraft.

  2. Evidence For Rapid Spatiotemporal Changes in Genetic Structure of an Alien Whitefly During Initial Invasion

    PubMed Central

    Chu, Dong; Guo, Dong; Tao, Yunli; Jiang, Defeng; Li, Jie; Zhang, Youjun

    2014-01-01

    The sweetpotato whitefly Bemisia tabaci Q species is a recent invader and important pest of agricultural crops in China. This research tested the hypothesis that the Q populations that establish in agricultural fields in northern China each year are derived from multiple secondary introductions and/or local populations that overwinter in greenhouses (the pest cannot survive winters in the field in northern China). Here, we report the evidence that the Q populations in agricultural fields mainly derive from multiple secondary introductions. In addition, the common use of greenhouses during the winter in certain locations in northern China helps increase the genetic diversity and the genetic structure of the pest. The genetic structure information generated from this long-term and large-scale field analysis increases our understanding of B. tabaci Q as an invasive pest and has important implications for B. tabaci Q management. PMID:24637851

  3. DIVWAG Model Documentation. Volume II. Programmer/Analyst Manual. Part 4.

    DTIC Science & Technology

    1976-07-01

    Model Constant Data Deck Structure . .. .... IV-13-A-40 Appendix B. Movement Model Program Descriptions . .. .. . .IV-13-B-1 1. Introduction...Data ................ IV-15-A-17 11. Airmobile Constant Data Deck Structure .. ...... .. IV-15-A-30 Appendix B. Airmobile Model Program Descriptions...Make no changes. 12. AIRMOBILE CONSTANT DATA DECK STRUCTURE . The deck structure required by the Airmobile Model constant data load program and the data

  4. Active control of large space structures: An introduction and overview

    NASA Technical Reports Server (NTRS)

    Doane, G. B., III; Tollison, D. K.; Waites, H. B.

    1985-01-01

    An overview of the large space structure (LSS) control system design problem is presented. The LSS is defined as a class of system, and LSS modeling techniques are discussed. Model truncation, control system objectives, current control law design techniques, and particular problem areas are discussed.

  5. Fracture of Structural Materials under Dynamic Loading

    DTIC Science & Technology

    1981-03-25

    in character- izing the dynamic fracture resistance of materials, and in designing equipment and procedures for measuring dynamic fracture toughness...useful in assessing the safety of structures under dynamic loads, in characterizing the dyraamic fracture resistance of materials, and in designing ...I INTRODUCTION Structures used by the United States Air Force must be designed to resist catastrophic fracture when subjected ti dynamic loads. For

  6. Succeeding in New Vaccine Introduction: Lessons Learned From the Introduction of Inactivated Poliovirus Vaccine in Cameroon, Kenya, and Nigeria

    PubMed Central

    Snidal, Sarah; Saidu, Yauba; Ojumu, Abiola; Ngatia, Antony; Bagana, Murtala; Mutuku, Faith; Sobngwi, Joelle; Efe-Aluta, Oniovo; Roper, Julia; LeTallec, Yann; Kang’ethe, Alice

    2017-01-01

    Abstract Introducing a new vaccine is a large-scale endeavor that can face many challenges, resulting in introduction delays and inefficiencies. The development of national task teams and tools, such as prelaunch trackers, for the introduction of new vaccines (hereafter, “new vaccine introductions” [NVIs]) can help countries implement robust project management systems, front-load critical preparatory activities, and ensure continuous communication around vaccine supply and financing. In addition, implementing postlaunch assessments to take rapid corrective action accelerates the uptake of the new vaccines. NVIs can provide an opportunity to strengthen routine immunization, through strengthening program management systems or by reinforcing local immunization managers’ abilities, among others. This article highlights key lessons learned during the introduction of inactivated poliovirus vaccine in 3 countries that would make future NVIs more successful. The article concludes by considering how the Immunization Systems Management Group of the Global Polio Eradication Initiative has been useful to the NVI process and how such global structures could be further enhanced. PMID:28838156

  7. Tropical fish community does not recover 45 years after predator introduction.

    PubMed

    Sharpe, D M T; De León, L F; González, R; Torchin, M E

    2017-02-01

    Predation is considered to be an important factor structuring natural communities. However, it is often difficult to determine how it may influence long-term, broad-scale, diversity patterns, particularly in diverse tropical systems. Biological introductions can provide powerful insight to test the sustained consequences of predation in natural communities, if pre-introduction data are available. Half a century ago, Zaret and Paine demonstrated strong and immediate community-level effects following the introduction of a novel apex predator (peacock bass, Cichla monoculus) into Lake Gatun, Panama. To test for long-term changes associated with this predator introduction, we followed up on their classic study by replicating historical sampling methods and examining changes in the littoral fish community at two sites in Lake Gatun 45 years post-introduction. To broaden our inference, we complemented this temporal comparison with a spatial analysis, wherein we compared the fish communities from two lakes with and one lake without peacock bass. Comparisons with historical data revealed that the peacock bass remains the most abundant predator in Lake Gatun. Furthermore, the collapse of the littoral prey community observed immediately following the invasion has been sustained over the past 45 years. The mean abundance of native littoral fish is now 96% lower than it was prior to the introduction. Diversity (rarefied species richness) declined by 64% post-introduction, and some native species appear to have been locally extirpated. We observed a similar pattern across invaded and uninvaded lakes: the mean abundance of native fishes was 5-40 times lower in lakes with (Gatun, Alajuela) relative to the lake without peacock bass (Bayano). In particular, small-bodied native fishes (Characidae, Peociliidae), which are common prey of the peacock bass, were more than two orders of magnitude (307 times) less abundant in Gatun and one order of magnitude (28 times) less abundant in Alajuela than in Bayano. However, total native fish diversity did not differ significantly across lakes, suggesting that while many native species have declined in abundance, few have been completely extirpated. Introduced predators can have strong effects on community structure and functional diversity, even in highly diverse tropical communities, and these effects can persist over multiple decades. © 2016 by the Ecological Society of America.

  8. Electronic Reliability Design Handbook. Volume 1

    DTIC Science & Technology

    1988-10-12

    greater use of proven designs , more design attention to non -random failures, design sim- plicity, improved quality control , more effective development and...RELIABILITY ENGINEERING DESIGN GUIDELINES 7-1 7.1 INTRODUCTION 7-1 7.2 PART SELECTION AND CONTROL 7-1 7.3 DERATING 7-4 7.3.1 DERATING OF MECHANICAL STRUCTURAL...11-58 11.3.1 INTRODUCTION 11-58 11.3.2 MAINTAINABILITY DESIGN ATTRIBUTES 11-59 11.3.3 MAINTAINABILITY CONTROL PARAMETERS 11-59 11.3.4 MAINTAINABILITY

  9. The Structural Adjustment Programme and the Elderly in Nigeria.

    ERIC Educational Resources Information Center

    Ekpenyong, Stephen

    1995-01-01

    Analyzes the impact of recent economic changes accompanying the introduction of the Structural Adjustment Programme (SAP) and ongoing cultural styles on the aged in Nigeria. Compared to younger generations, the relative position of the elderly has not changed significantly, although the latter's position has deteriorated on dimensions such as…

  10. An Investigation of the Intellectual Structure of Opinion Mining Research

    ERIC Educational Resources Information Center

    Zhu, Yongjun; Kim, Meen Chul; Chen, Chaomei

    2017-01-01

    Introduction: Opinion mining has been receiving increasing attention from a broad range of scientific communities since early 2000s. The present study aims to systematically investigate the intellectual structure of opinion mining research. Method: Using topic search, citation expansion, and patent search, we collected 5,596 bibliographic records…

  11. The Millennial Generation: Common Experience Guiding Them into Adulthood

    ERIC Educational Resources Information Center

    Cecere, Donna-Marie

    2017-01-01

    The Millennial Generation, those born from 1980-2000, see the world from a different viewpoint. This distinctive cohort has structured their lives in a different manner than preceding generations. The introduction and influence of social, political, and technological changes over the past few decades have structured Millennials' unique and…

  12. Geographic population structure in an outcrossing plant invasion after centuries of cultivation and recent founding events

    USDA-ARS?s Scientific Manuscript database

    Population structure and genetic diversity of invasions are the result of evolutionary processes such as natural selection, drift, and founding events. Some invasions are also molded by additional human activities such as selection for cultivars and intentional introduction of desired phenotypes, wh...

  13. Hidden Myth: Structure & Symbolism in Advertising.

    ERIC Educational Resources Information Center

    Leymore, Varda Langholz

    This discussion of advertising treats it as a communication system analyzable in structuralist terms. Building on the approaches of Levi-Strauss and others, the discussion begins with a general introduction to structuralism and goes on to outline the specific methodology adopted in this study. The approach is illustrated in two contexts: static…

  14. Riparian ecosystems and buffers - multiscale structure, function, and management: introduction

    Treesearch

    Kathleen A. Dwire; Richard R. Lowrance

    2006-01-01

    Given the importance of issues related to improved understanding and management of riparian ecosystems and buffers, the American Water Resources Association (AWRA) sponsored a Summer Specialty Conference in June 2004 at Olympic Valley, California, entitled 'Riparian Ecosystems and Buffers: Multiscale Structure, Function, and Management.' The primary objective...

  15. "Information in Context": Co-Designing Workplace Structures and Systems for Organizational Learning

    ERIC Educational Resources Information Center

    Somerville, Mary M.; Howard, Zaana

    2010-01-01

    Introduction: This paper discusses an "information in context" design project at Auraria Library in Denver, Colorado which aims to collaboratively create organizational structures and communication systems with and for library employees. Method: This action research project is founded within shared leadership, informed learning and…

  16. Forward Skirt Structural Testing on the Space Launch System (SLS) Program

    NASA Technical Reports Server (NTRS)

    Lohrer, Joe; Wright, R. D.

    2016-01-01

    Introduction: (a) Structural testing was performed to evaluate Space Shuttle heritage forward skirts for use on the Space Launch System (SLS) program, (b) Testing was required because SLS loads are approximately 35% greater than shuttle loads; and (c) Two forwards skirts were tested to failure.

  17. THE STRUCTURE OF COCHABAMBA QUECHUA.

    ERIC Educational Resources Information Center

    LASTRA, YOLANDA; SOLA, DONALD F.

    THE PURPOSE OF THIS STUDY IS TO DESCRIBE THE MAIN STRUCTURAL ASPECTS OF COCHABAMBA QUECHUA. IT IS INTENDED TO SERVE AS A REFERENCE BOOK FOR LINGUISTS AND THOSE LEARNING THIS DIALECT. THE INTRODUCTION DISCUSSES THE STUDY'S PURPOSE, INFORMANTS, METHODS, TERMINOLOGY, AND NOTATION. THE AUTHORS THEN EXAMINE IN SEPARATE CHAPTERS PHONOLOGY,…

  18. Systematic documentation of new vaccine introduction in selected countries of the Latin American Region.

    PubMed

    de Oliveira, Lúcia H; Toscano, Cristiana M; Sanwogou, N Jennifer; Ruiz-Matus, Cuauhtémoc; Tambini, Gina; Roses-Periago, Mirta; Andrus, Jon K

    2013-07-02

    Countries in Latin America were among the first developing countries to introduce new vaccines, particularly rotavirus (RV) and pneumococcal conjugate vaccines (PCVs), into their national immunization schedules. Experiences and lessons learned from these countries are valuable to donors, immunization partners, and policy makers in other countries wishing to make informed decisions on vaccine introduction. In order to enhance knowledge and promote understanding of the process of new vaccine introduction in the Latin American Region, with particular focus on RV and PCV, we conducted a systematic qualitative assessment. We evaluated the decision-making process, documented the structure in place, and reviewed key factors pertaining to new vaccine introduction. These include country morbidity and mortality data available prior to vaccine introduction, funding sources and mechanisms for vaccine introduction, challenges of implementation, and assessment of vaccine impact. From March 2010 to April 2011, we evaluated a subset of countries that had introduced RV and/or PCV in the past five years through interviews with key informants at the country level and through a systematic review of published data, gray literature, official technical documents, and country-specific health indicators. Countries evaluated were Bolivia, Brazil, Nicaragua, Peru, and Venezuela. In all countries, the potential of new vaccines to reduce mortality, as established by Millennium Development Goal 4, was an important consideration leading to vaccine introduction. Several factors-the availability of funds, the existence of sufficient evidence for vaccine introduction, and the feasibility of sustainable financing-were identified as crucial components of the decision-making process in the countries evaluated. The decision making process regarding new vaccine introduction in the countries evaluated does not follow a systematic approach. Nonetheless, existing evidence on efficacy, potential impact, and cost-effectiveness of vaccine introduction, even if not local data, was important in the decision making process for vaccine introduction. Copyright © 2013 Elsevier Ltd. All rights reserved.

  19. Supramolecular structure of polymer binders and composites: targeted control based on the hierarchy

    NASA Astrophysics Data System (ADS)

    Matveeva, Larisa; Belentsov, Yuri

    2017-10-01

    The article discusses the problem of targeted control over properties by modifying the supramolecular structure of polymer binders and composites based on their hierarchy. Control over the structure formation of polymers and introduction of modifying additives should be tailored to the specific hierarchical structural levels. Characteristics of polymer materials are associated with structural defects, which also display a hierarchical pattern. Classification of structural defects in polymers is presented. The primary structural level (nano level) of supramolecular formations is of great importance to the reinforcement and regulation of strength characteristics.

  20. Introduction of structural health and safety monitoring warning systems for Shenzhen-Hong Kong Western Corridor Shenzhen Bay Bridge

    NASA Astrophysics Data System (ADS)

    Li, N.; Zhang, X. Y.; Zhou, X. T.; Leng, J.; Liang, Z.; Zheng, C.; Sun, X. F.

    2008-03-01

    Though the brief introduction of the completed structural health and safety monitoring warning systems for Shenzhen-Hongkong western corridor Shenzhen bay highway bridge (SZBHMS), the self-developed system frame, hardware and software scheme of this practical research project are systematically discussed in this paper. The data acquisition and transmission hardware and the basic software based on the NI (National Instruments) Company virtual instruments technology were selected in this system, which adopted GPS time service receiver technology and so on. The objectives are to establish the structural safety monitoring and status evaluation system to monitor the structural responses and working conditions in real time and to analyze the structural working statue using information obtained from the measured data. It will be also provided the scientific decision-making bases for the bridge management and maintenance. Potential technical approaches to the structural safety warning systems, status identification and evaluation method are presented. The result indicated that the performance of the system has achieved the desired objectives, ensure the longterm high reliability, real time concurrence and advanced technology of SZBHMS. The innovate achievement which is the first time to implement in domestic, provide the reference for long-span bridge structural health and safety monitoring warning systems design.

  1. Homooligomeric β3 (R)-valine peptides: Transformation between C14 and C12 helical structures induced by a guest Aib residue.

    PubMed

    Vasantha, Basavalingappa; George, Gijo; Raghothama, Srinivasarao; Balaram, Padmanabhan

    2017-01-01

    Novel helical, structures unprecedented in the chemistry of α-polypeptides, may be found in polypeptides containing β and γ amino acids. The structural characterization of C 12 and C 14 -helices in oligo β-peptides was originally achieved using conformationally constrained cyclic β-residues. This study explores the conformational characteristics of proteinogenic β 3 residues in homooligomeric sequences and addresses the issue of inducing a transition between C 14 and C 12 helices by the introduction of a guest α-residue. Folded C 14 -helical structures are demonstrated for the nonapeptide Boc-[β 3 (R)Val] 9 -OMe by NMR methods in CDCl 3 -DMSO mixtures, while the peptide was found to be aggregated in CDCl 3 . The insertion of a guest Aib residue into an oligo-β-valine sequence in the octapeptide model Boc-[(β 3 (R)Val) 3 -Aib-(β 3 (R)Val] 4 -OMe results in well dispersed NH region in the NMR spectrum indicating folded structures in CDCl 3 . Structure calculations for both the peptides using NOE distance constraints support a C 14 helical structure in the homooligomer which transform into a C 12 helix on introduction of the guest Aib residue. © 2016 Wiley Periodicals, Inc.

  2. TALC: a new deployable concept for a 20m far-infrared space telescope

    NASA Astrophysics Data System (ADS)

    Durand, Gilles; Sauvage, Marc; Bonnet, Aymeric; Rodriguez, Louis; Ronayette, Samuel; Chanial, Pierre; Scola, Loris; Révéret, Vincent; Aussel, Hervé; Carty, Michael; Durand, Matthis; Durand, Lancelot; Tremblin, Pascal; Pantin, Eric; Berthe, Michel; Martignac, Jérôme; Motte, Frédérique; Talvard, Michel; Minier, Vincent; Bultel, Pascal

    2014-08-01

    TALC, Thin Aperture Light Collector is a 20 m space observatory project exploring some unconventional optical solutions (between the single dish and the interferometer) allowing the resolving power of a classical 27 m telescope. With TALC, the principle is to remove the central part of the prime mirror dish, cut the remaining ring into 24 sectors and store them on top of one-another. The aim of this far infrared telescope is to explore the 600 μm to 100 μm region. With this approach we have shown that we can store a ring-telescope of outer diameter 20m and ring thickness of 3m inside the fairing of Ariane 5 or Ariane 6. The general structure is the one of a bicycle wheel, whereas the inner sides of the segments are in compression to each other and play the rule of a rim. The segments are linked to each other using a pantograph scissor system that let the segments extend from a pile of dishes to a parabolic ring keeping high stiffness at all time during the deployment. The inner corners of the segments are linked to a central axis using spokes as in a bicycle wheel. The secondary mirror and the instrument box are built as a solid unit fixed at the extremity of the main axis. The tensegrity analysis of this structure shows a very high stiffness to mass ratio, resulting into 3 Hz Eigen frequency. The segments will consist of two composite skins and honeycomb CFRP structure build by replica process. Solid segments will be compared to deformable segments using the controlled shear of the rear surface. The adjustment of the length of the spikes and the relative position of the side of neighbor segments let control the phasing of the entire primary mirror. The telescope is cooled by natural radiation. It is protected from sun radiation by a large inflatable solar screen, loosely linked to the telescope. The orientation is performed by inertia-wheels. This telescope carries a wide field bolometer camera using cryocooler at 0.3K as one of the main instruments. This telescope may be launched with an Ariane 6 rocket up to 800 km altitude, and use a plasma stage to reach the Lagrange 2 point within 18 month. The plasma propulsion stage is a serial unit also used in commercial telecommunication satellites. When the plasma launch is completed, the solar panels will be used to provide the power for communication, orientation and power the cryo-coolers for the instruments. The guide-line for development of this telescope is to use similar techniques and serial subsystems developed for the satellite industry. This is the only way to design and manufacture a large telescope at a reasonable cost.

  3. High Power Combiner/Divider with Coupled Lines for Broadband Applications

    DTIC Science & Technology

    2017-03-20

    novel isolation structure will also be presented. I. INTRODUCTION Power divider/combiners are traditionally used in the development of high power ...a novel Gysel divider/combiner structure have been demonstrated. The divider/combiner are applicable to various high- power , broadband radar, EW...Gysel Power Divider With Arbitrary Power Ratios and Filtering Responses Using Coupling Structure ,” IEEE Transactions on Microwave Theory and Tech., vol

  4. Applying Massively Parallel Kinetic Monte Carlo Methods to Simulate Grain Growth and Sintering in Powdered Metals

    DTIC Science & Technology

    2011-09-01

    Structure Evolution During Sintering From [19]. ...................................20 Figure 10. Ising Model Configuration With Eight Nearest Neighbors...INTRODUCTION A. MOTIVATION The ability to fabricate structural components from metals with a fine (micron- sized), controlled grain size is one of the...hallmarks of modern, structural metallurgy. Powder metallurgy, in particular, consists of powder manufacture, powder blending, compacting, and sintering

  5. Fog collectors and collection techniques

    NASA Astrophysics Data System (ADS)

    Höhler, I.; Suau, C.

    2010-07-01

    The earth sciences taught that due to the occurrence of water in three phases: gas, liquid and solid, solar energy keeps the hydrological cycle going, shaping the earth surface while regulating the climate and thus allowing smart technologies to interfere in the natural process by rerouting water and employing its yield for natural and human environments’ subsistence. This is the case of traditional fog collectors implemented by several researchers along the Atacama Desert since late ’50s such as vertical tensile mesh or macro-diamonds structures. Nevertheless, these basic prototypes require to be upgraded, mainly through new shapes, fabrics and frameworks’ types by following the principles of lightness, transformability, portability and polyvalence. The vertical canvas of conventional fog collectors contain too much stressed at each joints and as result it became vulnerable. Our study constitutes a research by design of two fog-trap devices along the Atacama Desert. Different climatic factors influence the efficiency of fog harvesting. In order to increase yield of collected fog water, we need to establish suitable placements that contain high rates of fog’s accumulation. As important as the location is also the building reliability of these collectors that will be installed. Their frames and skins have to be adjustable to the wind direction and resistant against strong winds and rust. Its fabric need to be more hydrophobic, elastic and with light colours to ease dripping/drainage and avoid ultra-violet deterioration. In addition, meshes should be well-tensed and frames well-embraced too. In doing so we have conceived two fog collectors: DropNet© (Höhler) and FogHive© (Suau). These designs explore climatic design parameters combined with the agile structural principles of Tensegrity and Geodesic widely developed by Bucky Fuller and Frei Otto. The research methods mainly consisted of literature review; fieldwork; comparative analysis of existing fog collection’s techniques and climatic design simulations. DropNet© is a lightweight fog collector kit -a standing-alone web- resistant against very strong winds. It is constructed with an elastic mesh according to the required tension. Apart from this, it is ease to be transported, assemble and relocated due to its tent-like construction. As a flexible construction it can be installed on flatten or uneven grounds. FogHive© is a modular space-frame, fully wrapped with a light waxy mesh, that can collect water fog and also performs like a shading/cooling device and a soil humidifier for greenery and potential inhabitation. Its body consists of a deployable polygonal structure with an adjustable polyvalent membrane which performs as water repellent skin (facing prevailing winds) and shading device facing Equator. In addition, a domestic wind turbine is installed within the structural frame to provide autonomous electrification. Both models have great applicability to provide drinking water in remote place and also irrigating water to repair or re-establish flora. Water collector, filtering (purification) and irrigation network are designed with appropriate materials and techniques.

  6. Introduction to the Special Issue: Drugs, Wars, Military Personnel, and Veterans

    PubMed Central

    Golub, Andrew; Bennett, Alexander S.

    2013-01-01

    This special issue examines major structural, sociocultural, and behavioral issues surrounding substance use and misuse among US military personnel and veterans who served in recent military conflicts in Iraq and Afghanistan. This introduction provides a brief historical review of the US’s experiences of the linkages between war and substance use, misuse, and abuse. It then describes how the various topics covered in this issue span the military-veteran life course and explains the significance of each contribution. PMID:23869453

  7. Essential Elements of Geologic Reports.

    ERIC Educational Resources Information Center

    Webb, Elmer James

    1988-01-01

    Described is a report outline for geologic reports. Essential elements include title; abstract; introduction; stratigraphy; petrography; geochemistry; petrology; geophysics; structural geology; geologic history; modeling; economics; conclusions; and recommendations. (Author/CW)

  8. Ecosystem management, forest health, and silviculture

    Treesearch

    Merrill R. Kaufmann; Claudia M. Regan

    1995-01-01

    Forest health issues include the effects of fire suppression and grazing on forest stands, reduction in amount of old-growth forests, stand structural changes associated with even-aged management, .changes in structure of the landscape mosaic, loss of habitat for threatened species, and the introduction of exotic species. The consequences of these impacts can be...

  9. Journal Clubs and Case Conferences: From Academic Tradition to Communities of Practice

    ERIC Educational Resources Information Center

    Price, David W.; Felix, Kate G.

    2008-01-01

    Introduction: As small group learning sessions, Journal Clubs (JCs) and Case Conferences (CCs), if structured interactively, have potential as educational formats that can change practice. However, the degree to which these formats, as currently typically structured, lead to practice change is unknown. Methods: We used concepts of communities of…

  10. Navigation and Comprehension of Digital Expository Texts: Hypertext Structure, Previous Domain Knowledge, and Working Memory Capacity

    ERIC Educational Resources Information Center

    Burin, Debora I.; Barreyro, Juan P.; Saux, Gastón; Irrazábal, Natalia C.

    2015-01-01

    Introduction: In contemporary information societies, reading digital text has become pervasive. One of the most distinctive features of digital texts is their internal connections via hyperlinks, resulting in non-linear hypertexts. Hypertext structure and previous knowledge affect navigation and comprehension of digital expository texts. From the…

  11. Discussion Tool Effects on Collaborative Learning and Social Network Structure

    ERIC Educational Resources Information Center

    Tomsic, Astrid; Suthers, Daniel D.

    2006-01-01

    This study investigated the social network structure of booking officers at the Honolulu Police Department and how the introduction of an online discussion tool affected knowledge about operation of a booking module. Baseline data provided evidence for collaboration among officers in the same district using e-mail, telephone and face-to-face media…

  12. The Microscope: I--Structure. Health Occupations Education Module.

    ERIC Educational Resources Information Center

    Temple Univ., Philadelphia, PA. Div. of Vocational Education.

    This module on the structure of the microscope is one of 17 modules designed for individualized instruction in health occupations education programs at both the secondary and postsecondary levels. This module consists of an introduction to the module topic, a list of resources needed, and two learning experiences. Each learning experience contains…

  13. Unit: The Earth, Inspection Pack, National Trial Print.

    ERIC Educational Resources Information Center

    Australian Science Education Project, Toorak, Victoria.

    The core portion of this trial unit prepared by the Australian Science Education Project provides an introduction to the structure of the earth, volcanic activity, the types of igneous rocks, earthquakes, and seismology, with an emphasis on the techniques of inference used to relate external evidence to internal structure. The optional activities…

  14. A Structural Equation Model for Predicting Business Student Performance

    ERIC Educational Resources Information Center

    Pomykalski, James J.; Dion, Paul; Brock, James L.

    2008-01-01

    In this study, the authors developed a structural equation model that accounted for 79% of the variability of a student's final grade point average by using a sample size of 147 students. The model is based on student grades in 4 foundational business courses: introduction to business, macroeconomics, statistics, and using databases. Educators and…

  15. One-dimensional Confinement Effect on the Self-assembly of Symmetric H-shaped Copolymers in a Thin Film.

    PubMed

    Mu, Dan; Li, Jian-Quan; Feng, Sheng-Yu

    2017-10-19

    The self-assembly of a reformed symmetric H-shaped copolymer with four hydrophilic branches and one hydrophobic stem was systematically investigated. The existence of vacancies is vital to regulate the sizes of self-assembled cylinders to be able to form a hexagonal arrangement. With the introduction of horizontal-orientated confinement, a micellar structure is formed through a coalescence mechanism. The short acting distance and large influencing area of the confinement produces numerous small-sized micelles. Additionally, the cycled "contraction-expansion" change helps achieve hexagonal arrangement. In contrast, the introduction of lateral-oriented confinement with long acting distance and small influencing area cannot change the cylindrical structure. Under the fission mechanism, in which the larger cylinder splits into smaller ones, it is quite efficient to generate hierarchical-sized cylinders from larger-sized cylinders in the middle region and smaller-sized cylinders near both walls. The results indicate the possibility of regulating the characteristics of a nanomaterial by tuning the molecular structure of the copolymer and the parameters of the introduced confinement, which are closely related to the self-assembly structure.

  16. The Reader Effect (Instruction/Awareness of Text Structure) and Text Effect (Well-Structured vs. Bad-Structured Texts) on First and Second/Foreign Language Reading Comprehension and Recall--What Does Research Teach Us?

    ERIC Educational Resources Information Center

    Chang, Carrie

    This paper first gives a brief chronological overview of reading theory development and a short introduction to schema theory, and then comprehensively reviews, comments, and synthesizes research-based studies, published between 1980 and 2002, that examined the effect of text structure (reader effect and text effect) on L1 and L2 reading…

  17. 5.0 Aerodynamic and Propulsive Decelerator Systems

    NASA Technical Reports Server (NTRS)

    Cruz, Juan R.; Powell, Richard; Masciarelli, James; Brown, Glenn; Witkowski, Al; Guernsey, Carl

    2005-01-01

    Contents include the following: Introduction. Capability Breakdown Structure. Decelerator Functions. Candidate Solutions. Performance and Technology. Capability State-of-the-Art. Performance Needs. Candidate Configurations. Possible Technology Roadmaps. Capability Roadmaps.

  18. Brain Time and Physical Time

    NASA Astrophysics Data System (ADS)

    Fidelman, Uri

    The hemispheric paradigm verifies Kant's suggestion that time and space are our subjective modes of perceiving experience. Time and space are two modes of organizing the sensory input by the l- and right-hemispheric neural mechanisms, respectively. The neural structures of the l- and right-hemispheric mechanisms force our consciousness to perceive time as one-dimensional and propagating from the past towards the future, and space as a simultaneously perceived multidimensional structure. The introduction of temporal propagation from the future towards the past by Feynman and other physicists caused the transfer of the concept time from the l hemisphere (which cannot perceive this change of the temporal direction) to the right one. This transfer requires and allows for the introduction of additional temporal axes in order to solve paradoxes in physics.

  19. The landscape of nonlinear structural dynamics: an introduction

    PubMed Central

    Butlin, T.; Woodhouse, J.; Champneys, A. R.

    2015-01-01

    Nonlinear behaviour is ever-present in vibrations and other dynamical motions of engineering structures. Manifestations of nonlinearity include amplitude-dependent natural frequencies, buzz, squeak and rattle, self-excited oscillation and non-repeatability. This article primarily serves as an extended introduction to a theme issue in which such nonlinear phenomena are highlighted through diverse case studies. More ambitiously though, there is another goal. Both the engineering context and the mathematical techniques that can be used to identify, analyse, control or exploit these phenomena in practice are placed in the context of a mind-map, which has been created through expert elicitation. This map, which is available in software through the electronic supplementary material, attempts to provide a practitioner’s guide to what hitherto might seem like a vast and complex research landscape. PMID:26303925

  20. The landscape of nonlinear structural dynamics: an introduction.

    PubMed

    Butlin, T; Woodhouse, J; Champneys, A R

    2015-09-28

    Nonlinear behaviour is ever-present in vibrations and other dynamical motions of engineering structures. Manifestations of nonlinearity include amplitude-dependent natural frequencies, buzz, squeak and rattle, self-excited oscillation and non-repeatability. This article primarily serves as an extended introduction to a theme issue in which such nonlinear phenomena are highlighted through diverse case studies. More ambitiously though, there is another goal. Both the engineering context and the mathematical techniques that can be used to identify, analyse, control or exploit these phenomena in practice are placed in the context of a mind-map, which has been created through expert elicitation. This map, which is available in software through the electronic supplementary material, attempts to provide a practitioner's guide to what hitherto might seem like a vast and complex research landscape. © 2015 The Authors.

  1. Time Spent on Dedicated Patient Care and Documentation Tasks Before and After the Introduction of a Structured and Standardized Electronic Health Record.

    PubMed

    Joukes, Erik; Abu-Hanna, Ameen; Cornet, Ronald; de Keizer, Nicolette F

    2018-01-01

    Physicians spend around 35% of their time documenting patient data. They are concerned that adopting a structured and standardized electronic health record (EHR) will lead to more time documenting and less time for patient care, especially during consultations. This study measures the effect of the introduction of a structured and standardized EHR on documentation time and time for dedicated patient care during outpatient consultations. We measured physicians' time spent on four task categories during outpatient consultations: documentation, patient care, peer communication, and other activities. Physicians covered various specialties from two university hospitals that jointly implemented a structured and standardized EHR. Preimplementation, one hospital used a legacy-EHR, and one primarily paper-based records. The same physicians were observed 2 to 6 months before and 6 to 8 months after implementation.We analyzed consultation duration, and percentage of time spent on each task category. Differences in time distribution before and after implementation were tested using multilevel linear regression. We observed 24 physicians (162 hours, 439 consultations). We found no significant difference in consultation duration or number of consultations per hour. In the legacy-EHR center, we found the implementation associated with a significant decrease in time spent on dedicated patient care (-8.5%). In contrast, in the previously paper-based center, we found a significant increase in dedicated time spent on documentation (8.3%) and decrease in time on combined patient care and documentation (-4.6%). The effect on dedicated documentation time significantly differed between centers. Implementation of a structured and standardized EHR was associated with 8.5% decrease in time for dedicated patient care during consultations in one center and 8.3% increase in dedicated documentation time in another center. These results are in line with physicians' concerns that the introduction of a structured and standardized EHR might lead to more documentation burden and less time for dedicated patient care. Schattauer GmbH Stuttgart.

  2. A Program on Biochemical and Biomedical Engineering.

    ERIC Educational Resources Information Center

    San, Ka-Yiu; McIntire, Larry V.

    1989-01-01

    Presents an introduction to the Biochemical and Biomedical Engineering program at Rice University. Describes the development of the academic and enhancement programs, including organizational structure and research project titles. (YP)

  3. Pivotal debates and controversies on the structure and function of the avian respiratory system: setting the record straight.

    PubMed

    Maina, John N

    2017-08-01

    Among the extant air-breathing vertebrates, the avian respiratory system is structurally the most complex and functionally the most efficient gas exchanger. Having been investigated for over four centuries, some aspects of its biology have been extremely challenging and highly contentious and others still remain unresolved. Here, while assessing the most recent findings, four notable aspects of the structure and function of the avian respiratory system are examined critically to highlight the questions, speculations, controversies and debates that have arisen from past research. The innovative techniques and experiments that were performed to answer particular research questions are emphasised. The features that are outlined here concern the arrangement of the airways, the path followed by the inspired air, structural features of the lung and the air and blood capillaries, and the level of cellular defence in the avian respiratory system. Hitherto, based on association with the proven efficiency of naturally evolved and human-made counter-current exchange systems rather than on definite experimental evidence, a counter-current gas exchange system was suggested to exist in the avian respiratory system and was used to explain its exceptional efficiency. However, by means of an elegant experiment in which the direction of the air-flow in the lung was reversed, a cross-current system was shown to be in operation instead. Studies of the arrangement of the airways and the blood vessels corroborated the existence of a cross-current system in the avian lung. While the avian respiratory system is ventilated tidally, like most other invaginated gas exchangers, the lung, specifically the paleopulmonic parabronchi, is ventilated unidirectionally and continuously in a caudocranial (back-to-front) direction by synchronized actions of the air sacs. The path followed by the inspired air in the lung-air sac system is now known to be controlled by a mechanism of aerodynamic valving and not by anatomical valves or sphincters, as was previously supposed. The structural strength of the air and blood capillaries is derived from: the interdependence between the air and blood capillaries; a tethering effect between the closely entwined respiratory units; the presence of epithelial-epithelial cell connections (retinacula or cross-bridges) that join the blood capillaries while separating the air capillaries; the abundance and intricate arrangement of the connective tissue elements, i.e. collagen, elastin, and smooth muscle fibres; the presence of type-IV collagen, especially in the basement membranes of the blood-gas barrier and the epithelial-epithelial cell connections; and a putative tensegrity state in the lung. Notwithstanding the paucity of free surface pulmonary macrophages, the respiratory surface of the avian lung is well protected from pathogens and particulates by an assortment of highly efficient phagocytic cells. In commercial poultry production, instead of weak pulmonary cellular defence, stressful husbandry practices such as overcrowding, force-feeding, and intense genetic manipulation for rapid weight gain and egg production may account for the reported susceptibility of birds to aerosol-transmitted diseases. © 2016 Cambridge Philosophical Society.

  4. Development of Scaffolds for Light Harvesting and Photocatalysis from the Coat Protein of Tobacco Mosaic Virus

    NASA Astrophysics Data System (ADS)

    Dedeo, Michel Toussaint

    The utility of a previously developed TMV-based light harvesting system has been dramatically expanded through the introduction of reactive handles for the site-specific modification of the interior and exterior surfaces. Further experiments to reengineer the coat protein have produced structures with unique, unexpected, and useful assembly properties that complement the newly available surface modifications. Energy transfer from chromophores in the RNA channel of self-assembled TMV structures to the exterior was made possible by conjugation of acceptor dyes and porphyrins to the N-terminus. By repositioning the N-terminus to the pore through circular permutation, this process was repeated to create structures that mimic the light harvesting 1 complex of photosynthetic bacteria. To study and improve upon natural photosynthesis, closely packed chromophore arrays and gold nanoparticles were tethered to the pore of stabilized TMV disks through introduction of a uniquely reactive lysine. Finally, a dimeric TMV coat protein was produced to control the distribution and arrangement of synthetic groups with synergistic activity.

  5. Determinants of performance failure in the nursing home industry☆

    PubMed Central

    Zinn, Jacqueline; Mor, Vincent; Feng, Zhanlian; Intrator, Orna

    2013-01-01

    This study investigates the determinants of performance failure in U.S. nursing homes. The sample consisted of 91,168 surveys from 10,901 facilities included in the Online Survey Certification and Reporting system from 1996 to 2005. Failed performance was defined as termination from the Medicare and Medicaid programs. Determinants of performance failure were identified as core structural change (ownership change), peripheral change (related diversification), prior financial and quality of care performance, size and environmental shock (Medicaid case mix reimbursement and prospective payment system introduction). Additional control variables that could contribute to the likelihood of performance failure were included in a cross-sectional time series generalized estimating equation logistic regression model. Our results support the contention, derived from structural inertia theory, that where in an organization’s structure change occurs determines whether it is adaptive or disruptive. In addition, while poor prior financial and quality performance and the introduction of case mix reimbursement increases the risk of failure, larger size is protective, decreasing the likelihood of performance failure. PMID:19128865

  6. Introduction of structural affinity handles as a tool in selective nucleic acid separations

    NASA Technical Reports Server (NTRS)

    Willson, III, Richard Coale (Inventor); Cano, Luis Antonio (Inventor)

    2011-01-01

    The method is used for separating nucleic acids and other similar constructs. It involves selective introduction, enhancement, or stabilization of affinity handles such as single-strandedness in the undesired (or desired) nucleic acids as compared to the usual structure (e.g., double-strandedness) of the desired (or undesired) nucleic acids. The undesired (or desired) nucleic acids are separated from the desired (or undesired) nucleic acids due to capture by methods including but not limited to immobilized metal affinity chromatography, immobilized single-stranded DNA binding (SSB) protein, and immobilized oligonucleotides. The invention is useful to: remove contaminating genomic DNA from plasmid DNA; remove genomic DNA from plasmids, BACs, and similar constructs; selectively separate oligonucleotides and similar DNA fragments from their partner strands; purification of aptamers, (deoxy)-ribozymes and other highly structured nucleic acids; Separation of restriction fragments without using agarose gels; manufacture recombinant Taq polymerase or similar products that are sensitive to host genomic DNA contamination; and other applications.

  7. Determinants of performance failure in the nursing home industry.

    PubMed

    Zinn, Jacqueline; Mor, Vincent; Feng, Zhanlian; Intrator, Orna

    2009-03-01

    This study investigates the determinants of performance failure in U.S. nursing homes. The sample consisted of 91,168 surveys from 10,901 facilities included in the Online Survey Certification and Reporting system from 1996 to 2005. Failed performance was defined as termination from the Medicare and Medicaid programs. Determinants of performance failure were identified as core structural change (ownership change), peripheral change (related diversification), prior financial and quality of care performance, size and environmental shock (Medicaid case mix reimbursement and prospective payment system introduction). Additional control variables that could contribute to the likelihood of performance failure were included in a cross-sectional time series generalized estimating equation logistic regression model. Our results support the contention, derived from structural inertia theory, that where in an organization's structure change occurs determines whether it is adaptive or disruptive. In addition, while poor prior financial and quality performance and the introduction of case mix reimbursement increases the risk of failure, larger size is protective, decreasing the likelihood of performance failure.

  8. Conflict of interest and FCTC implementation in China.

    PubMed

    Wan, Xia; Ma, Shaojun; Hoek, Janet; Yang, Jie; Wu, Lanyan; Zhou, Jiushun; Yang, Gonghuan

    2012-07-01

    To critically review the structure of tobacco control policy making in China, examine conflicts of interest within this structure, and consider how these affected the introduction of on-pack warnings. Government policy documents and warning labels were obtained and critically reviewed. Few differences exist between the on-pack warnings formerly used in China and those introduced ostensibly to meet Framework Convention on Tobacco Control (FCTC) obligations. Comparison with tobacco manufactured for export or overseas consumption shows the new Chinese domestic on-pack warnings are demonstrably inferior to those required internationally. The inherent conflict of interest in the Chinese tobacco control agency structure, which must meet commercial and public health objectives, undermined the introduction of new health warnings. To promote more effective tobacco control policies, the conflict of interest inhibiting the public health function of the State Tobacco Monopoly Administration (STMA) must be removed. Specifically, the public health function must be separated from oversight of commercial production, and packaging must be redesigned with pictorial warnings and messages compliant with Article 11 of the FCTC.

  9. (NZ)CH...O contacts assist crystallization of a ParB-like nuclease.

    PubMed

    Shaw, Neil; Cheng, Chongyun; Tempel, Wolfram; Chang, Jessie; Ng, Joseph; Wang, Xin-Yu; Perrett, Sarah; Rose, John; Rao, Zihe; Wang, Bi-Cheng; Liu, Zhi-Jie

    2007-07-07

    The major bottleneck for determination of 3 D structures of proteins using X-rays is the production of diffraction quality crystals. Often proteins are subjected to chemical modification to improve the chances of crystallization Here, we report the successful crystallization of a nuclease employing a reductive methylation protocol. The key to crystallization was the successful introduction of 44 new cohesive (NZ) CH...O contacts (3.2-3.7 A) by the addition of 2 methyl groups to the side chain amine nitrogen (NZ) of 9 lysine residues of the nuclease. The new contacts dramatically altered the crystallization properties of the protein, resulting in crystals that diffracted to 1.2 A resolution. Analytical ultracentrifugation analysis and thermodynamics results revealed a more compact protein structure with better solvent exclusion of buried Trp residues in the folded state of the methylated protein, assisting crystallization. In this study, introduction of novel cohesive (NZ)CH...O contacts by reductive methylation resulted in the crystallization of a protein that had previously resisted crystallization in spite of extensive purification and crystallization space screening. Introduction of (NZ)CH...O contacts could provide a solution to crystallization problems for a broad range of protein targets.

  10. Multi-Phase US Spread and Habitat Switching of a Post-Columbian Invasive, Sorghum halepense

    PubMed Central

    Barney, Jacob N.; Atwater, Daniel Z.; Pederson, Gary A.; Pederson, Jeffrey F.; Chandler, J. Mike; Cox, T. Stan; Cox, Sheila; Dotray, Peter; Kopec, David; Smith, Steven E.; Schroeder, Jill; Wright, Steven D.; Jiao, Yuannian; Kong, Wenqian; Goff, Valorie; Auckland, Susan; Rainville, Lisa K.; Pierce, Gary J.; Lemke, Cornelia; Compton, Rosana; Phillips, Christine; Kerr, Alexandra; Mettler, Matthew; Paterson, Andrew H.

    2016-01-01

    Johnsongrass (Sorghum halepense) is a striking example of a post-Columbian founder event. This natural experiment within ecological time-scales provides a unique opportunity for understanding patterns of continent-wide genetic diversity following range expansion. Microsatellite markers were used for population genetic analyses including leaf-optimized Neighbor-Joining tree, pairwise FST, mismatch analysis, principle coordinate analysis, Tajima’s D, Fu’s F and Bayesian clusterings of population structure. Evidence indicates two geographically distant introductions of divergent genotypes, which spread across much of the US in <200 years. Based on geophylogeny, gene flow patterns can be inferred to have involved five phases. Centers of genetic diversity have shifted from two introduction sites separated by ~2000 miles toward the middle of the range, consistent with admixture between genotypes from the respective introductions. Genotyping provides evidence for a ‘habitat switch’ from agricultural to non-agricultural systems and may contribute to both Johnsongrass ubiquity and aggressiveness. Despite lower and more structured diversity at the invasion front, Johnsongrass continues to advance northward into cooler and drier habitats. Association genetic approaches may permit identification of alleles contributing to the habitat switch or other traits important to weed/invasive management and/or crop improvement. PMID:27755565

  11. Five Factor Model personality disorder scales: An introduction to a special section on assessment of maladaptive variants of the five factor model.

    PubMed

    Bagby, R Michael; Widiger, Thomas A

    2018-01-01

    The Five-Factor Model (FFM) is a dimensional model of general personality structure, consisting of the domains of neuroticism (or emotional instability), extraversion versus introversion, openness (or unconventionality), agreeableness versus antagonism, and conscientiousness (or constraint). The FFM is arguably the most commonly researched dimensional model of general personality structure. However, a notable limitation of existing measures of the FFM has been a lack of coverage of its maladaptive variants. A series of self-report inventories has been developed to assess for the maladaptive personality traits that define Diagnostic and Statistical Manual of Mental Disorders (fifth edition; DSM-5) Section II personality disorders (American Psychiatric Association [APA], 2013) from the perspective of the FFM. In this paper, we provide an introduction to this Special Section, presenting the rationale and empirical support for these measures and placing them in the historical context of the recent revision to the APA diagnostic manual. This introduction is followed by 5 papers that provide further empirical support for these measures and address current issues within the personality assessment literature. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  12. Genetic Status and Timing of a Weevil Introduction to Santa Cruz Island, Galápagos

    PubMed Central

    2014-01-01

    Successful invasive species can overcome or circumvent the potential genetic loss caused by an introduction bottleneck through a rapid population expansion and admixture from multiple introductions. We explore the genetic makeup and the timing of a species introduction to Santa Cruz Island in the Galápagos archipelago. We investigate the presence of processes that can maintain genetic diversity in populations of the broad-nosed weevil Galapaganus howdenae howdenae. Analyses of combined genotypes for 8 microsatellite loci showed evidence of past population size reductions through moment and likelihood-based estimators. No evidence of admixture through multiple introductions was found, but substantial current population sizes (N0 298, 95% credible limits 50–2300), genetic diversity comparable with long-established endemics (Mean number of alleles = 3.875), and lack of genetic structure across the introduced range (F ST = 0.01359) could suggest that foundations are in place for populations to rapidly recover any loss of genetic variability. The time estimates for the introduction into Santa Cruz support an accidental transfer during the colonization period (1832–1959) predating the spurt in human population growth. Our evaluation of the genetic status of G. h. howdenae suggests potential for population growth in addition to our field observations of a concurrent expansion in range and feeding preferences towards protected areas and endemic host plants. PMID:24399746

  13. Junior High School Science: A Manual for Teachers. A Search for Structure. Grade 7.

    ERIC Educational Resources Information Center

    Baltimore County Public Schools, Towson, MD.

    GRADES OR AGES: Grade 7. SUBJECT MATTER: Science. ORGANIZATION AND PHYSICAL APPEARANCE: The introduction describes the development of the junior high school science program. The main text is divided into three phases: Processes and Skills, Developing a Model of Matter, and Human Structure and Function. Phase I contains two subcategories: Rocks and…

  14. Unboiling an Egg: An Introduction to Circular Dichroism and Protein Refolding

    ERIC Educational Resources Information Center

    Hoben, John P.; Wang, Jianing; Miller, Anne-Frances

    2017-01-01

    A signature of life is that biological molecules occur as a single stereoisomer with respect to each chiral center, and this is echoed in the structures of biological polymers. Thus, circular dichroism (CD) has emerged as a hallmark of biomolecular structures. The tangible and familiar phenomenon of raw egg white's conversion from transparent…

  15. On the Half Shell: An Introduction to Oysters and Their Unique Structures and Function

    ERIC Educational Resources Information Center

    Frederick, J. Adam; Haines, Sarah; Romano, Christina; Takacs, Jacqueline

    2017-01-01

    The eastern oyster, "Crassostrea virginica," is an ecologically and economically important species in Chesapeake Bay. Oysters are ecologically unique in the Chesapeake Bay because they build a structure known as a bar or reef by attaching to one another over a 45 long period of time. They have been coined the "Ecological Engineers…

  16. An Introduction to Loads Acting on Structures. Grades 6-8.

    ERIC Educational Resources Information Center

    Rushton, Erik; Ryan, Emily; Swift, Charles

    In this activity, students conduct several simple lab activities to learn about the five fundamental load types that can act on structures: tension, compression, shear, bending, and torsion. In Part One, students play the role of molecules in a beam subject to various loading schemes. In Part Two, students break foam insulation blocks by applying…

  17. Introduction to session on materials and structures

    NASA Technical Reports Server (NTRS)

    Vosteen, L. F.

    1978-01-01

    A review was given of the development of composites for aircraft. Supporting base technology and the Aircraft Energy Efficiency Composites Program are included. Specific topics discussed include: (1) environmental effects on materials; (2) material quality and chemical characterization; (3) design and analysis methods; (4) structural durability; (5) impact sensitivity; (6) carbon fiber electrical effects; and (7) composite components.

  18. Loss of foundation species: consequences for the structure and dynamics of forested ecosystems

    Treesearch

    Aaron M. Ellison; Michael S. Bank; Barton D. Clinton; Elizabeth A. Colburn; Katherine Elliott; Chelcy Rae Ford; David R. Foster; Brian D. Kloeppel; Jennifer D. Knoepp; Gary M. Lovett; Jacqueline Mohan; David A. Orwig; Nicholas L. Rodenhouse; William V. Sobczak; Kristina A. Stinson; Jeffrey K. Stone; Christopher M. Swan; Jill Thompson; Betsy Von Holle; Jackson R. Webster

    2005-01-01

    In many forested ecosystems, the architecture and functional ecology of certain tree species define forest structure and their species-specific traits control ecosystem dynamics. Such foundation tree species are declining throughout the world due to introductions and outbreaks of pests and pathogens, selective removal of individual taxa, and over-harvesting. Through a...

  19. 77 FR 42533 - Self-Regulatory Organizations; NYSE Arca, Inc.; Order Granting Approval of Proposed Rule Change...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-19

    ...-Regulatory Organizations; NYSE Arca, Inc.; Order Granting Approval of Proposed Rule Change Amending Its Rules... Ownership Structure of the Exchange July 13, 2012. I. Introduction On May 14, 2012, NYSE Arca, Inc. (``NYSE... Holdings from the ownership structure of the Exchange (the ``Merger''). The proposed rule changes were...

  20. The Representation of Anatomical Structures through Computer Animation for Scientific, Educational and Artistic Applications.

    ERIC Educational Resources Information Center

    Stredney, Donald Larry

    An overview of computer animation and the techniques involved in its creation is provided in the introduction to this masters thesis, which focuses on the problems encountered by students in learning the forms and functions of complex anatomical structures and ways in which computer animation can address these problems. The objectives for,…

  1. Introduction to LISREL: A Demonstration Using Students' Commitment to an Institution. ASHE 1987 Annual Meeting Paper.

    ERIC Educational Resources Information Center

    Stage, Frances K.

    The nature and use of LISREL (LInear Structural RELationships) analysis are considered, including an examination of college students' commitment to a university. LISREL is a fairly new causal analysis technique that has broad application in the social sciences and that employs structural equation estimation. The application examined in this paper…

  2. Regional impacts of technical change: the case of structural particleboard in the United States.

    Treesearch

    Zhi Xu; David N. Bengston; Hans M. Gregersen; Allen L. Lundgren

    1992-01-01

    Analyzes the regional impacts of research benefits in the United States due to the introduction of structural particleboard. The distribution of consumer benefits, producer benefits, direct employment impacts, and changes in wood requirements are analyzed for the four census regions. The distribution of benefits is found to differ widely between regions, indicating...

  3. Part I: Cognitive Development in Children--Piaget Development and Learning

    ERIC Educational Resources Information Center

    Piaget, Jean

    2003-01-01

    In this article, the author gives a general introduction of a few ideas on cognitive development in children. In the first part, he deals with the topic of development, a process which concerns the totality of the structures of knowledge. He reviews the stages of development of operational structures, distinguishes four main stages of development,…

  4. Data management in engineering

    NASA Technical Reports Server (NTRS)

    Browne, J. C.

    1976-01-01

    An introduction to computer based data management is presented with an orientation toward the needs of engineering application. The characteristics and structure of data management systems are discussed. A link to familiar engineering applications of computing is established through a discussion of data structure and data access procedures. An example data management system for a hypothetical engineering application is presented.

  5. Optimism and Pessimism of Physical Education and Non-Physical Education Students: Invariance of Structure

    ERIC Educational Resources Information Center

    Abu-Hilal, Maher M.; Zayed, Kashef

    2011-01-01

    Introduction: Optimism and pessimism are two psychological constructs that play a significant role in human mental and psychological hygiene. The two construct are strongly but negatively correlated. Optimism and pessimism can be influenced by culture and the environment. The present study attempts to test the structure of optimism and pessimism…

  6. Solitons in Crystalline Processes; Statistical thermodynamics of structural phase transitions and mesoscopic disorder

    NASA Astrophysics Data System (ADS)

    Fujimoto, Minoru

    2017-11-01

    Solitons in Crystalline Processes is an introduction to the statistical thermodynamics of phase transitions in crystallized solids. This book is written as an introductory treatise with respect to the soliton concept, from structural transitions where the crystal symmetry changes, to magnets and superconductors, describing the role of nonlinear excitations in detail.

  7. Brief Analysis of Application of Objective Structured Clinical Examination (OSCE) in Graduation Exams of Clinical Medical Students

    ERIC Educational Resources Information Center

    Du, Yihua; Yu, Ke; Li, Xiaohong; Wang, Feng; Wang, Tingting

    2011-01-01

    This article gives a brief introduction to the Objective Structured Clinical Examination (OSCE) and analyzes developmental progress of OSCE at both home and abroad and standardized patients' application in OSCE. Also, this article expounds application of OSCE in graduation exam of clinical medical students. Finally, this article summarizes…

  8. Genetic Epistemology and the Structure of Belief Systems: An Introduction to Piaget for Political Scientists.

    ERIC Educational Resources Information Center

    Ward, Dana

    Suggesting that the concept of structure employed by political scientists in the analysis of belief systems is inadequate and misleading, the paper discusses Jean Piaget's concept of egocentrism as a theoretical alternative to belief systems analysis. The purpose of the paper is to provide political scientists with a short but comprehensive…

  9. Finite element modeling of truss structures with frequency-dependent material damping

    NASA Technical Reports Server (NTRS)

    Lesieutre, George A.

    1991-01-01

    A physically motivated modelling technique for structural dynamic analysis that accommodates frequency dependent material damping was developed. Key features of the technique are the introduction of augmenting thermodynamic fields (AFT) to interact with the usual mechanical displacement field, and the treatment of the resulting coupled governing equations using finite element analysis methods. The AFT method is fully compatible with current structural finite element analysis techniques. The method is demonstrated in the dynamic analysis of a 10-bay planar truss structure, a structure representative of those contemplated for use in future space systems.

  10. LAVA Applications to Open Rotors

    NASA Technical Reports Server (NTRS)

    Kiris, Cetin C.; Housman, Jeff; Barad, Mike; Brehm, Christoph

    2015-01-01

    Outline: LAVA (Launch Ascent Vehicle Aerodynamics); Introduction; Acoustics Related Applications; LAVA Applications to Open Rotor; Structured Overset Grids; Cartesian Grid with Immersed Boundary; High Speed Case; High Speed Case with Plate Low Speed Case.

  11. Synthesis of Potential Trypanocides

    DTIC Science & Technology

    1987-12-01

    0188 Ia. REPORT SECURITY CLASSIFICATION 1b RESTRICTIVE MARKINGS Unclassified 2a. SECURITY CLASSIFICATION AUTHORITY 3 . DISTRIBUTION /AVAILABILITY OF...and the phenyl ring, ring structures 2 and 3 , introduction of a -CH:CII- group between the phenyl ring and its 4’-substituent, ring structure 4...imidazole (9, 15) thiazole (11) and pyridine (12-14) into ether-linked and vinyl-linked structures. 3 t % SCHEME 1 HETEROAROMATIC RINGS OHw Ch3 CH3 +1 N% f

  12. Executive overview and introduction to the SMAP information system life-cycle and documentation standards

    NASA Technical Reports Server (NTRS)

    1989-01-01

    An overview of the five volume set of Information System Life-Cycle and Documentation Standards is provided with information on its use. The overview covers description, objectives, key definitions, structure and application of the standards, and document structure decisions. These standards were created to provide consistent NASA-wide structures for coordinating, controlling, and documenting the engineering of an information system (hardware, software, and operational procedures components) phase by phase.

  13. Introduction to Using Native Plant Community on Dredge Material Placement Areas

    DTIC Science & Technology

    2017-05-01

    following: • providing wildlife habitat • inhibiting invasive species establishment • enhancing, structural stability of dikes • providing...areas. Typically, a diked structure is constructed and then filled with dredged material over an extended period of time (i.e., 10–50 years) until...Bourne, Tosin Sekoni, and David Price ERDC/TN EWN-17-2 May 2017 2 DMPA/CDF and are more cost effective to establish than other structural

  14. [Environmental health: the evolution of Colombia's current regulatory framework].

    PubMed

    García-Ubaque, Cesar A; García-Ubaque, Juan C; Vaca-Bohórquez, Martha L

    2013-01-01

    This essay presents an analysis of the evolution of environmental health management in Colombia, covering the period from the introduction of the Colombian Healthcare Code (1979) to laws 99 and 100 in 1993 and the introduction of Environmental Health Policy in Bogotá DC (2011). It proposes a conceptual model for environmental health management at three levels: proximal (physical, chemical and biological setting), intermediate (natural and cultural environment) and distal (economic, political and social structures). Relevant aspects of environmental health policy in Bogotá are analysed based on the proposed model.

  15. Introduction to SQL. Ch. 1

    NASA Technical Reports Server (NTRS)

    McGlynn, T.; Santisteban, M.

    2007-01-01

    This chapter provides a very brief introduction to the Structured Query Language (SQL) for getting information from relational databases. We make no pretense that this is a complete or comprehensive discussion of SQL. There are many aspects of the language the will be completely ignored in the presentation. The goal here is to provide enough background so that users understand the basic concepts involved in building and using relational databases. We also go through the steps involved in building a particular astronomical database used in some of the other presentations in this volume.

  16. Quantum Chemistry; A concise introduction for students of physics, chemistry, biochemistry and materials science

    NASA Astrophysics Data System (ADS)

    Thakkar, Ajit J.

    2017-09-01

    This book provides non-specialists with a basic understanding of the underlying concepts of quantum chemistry. It is both a text for second- or third-year undergraduates and a reference for researchers who need a quick introduction or refresher. All chemists and many biochemists, materials scientists, engineers, and physicists routinely use spectroscopic measurements and electronic structure computations in their work. The emphasis of Quantum Chemistry on explaining ideas rather than enumerating facts or presenting procedural details makes this an excellent foundation text/reference.

  17. Step-Tapered Active-Region Mid-Infrared Quantum Cascade Lasers and Novel Fabrication Processes for Buried Heterostructures

    DTIC Science & Technology

    2015-07-28

    up, g, IFR , E54 (or E43), and 54 (or 43) in STA-DPR, STA-SPR, and shallow-well QCL structures. 1 CHAPTER ONE INTRODUCTION 1.1 Introduction...much less transition diagonality than in shallow-well TA-QCL devices. To that effect, when calculating the IFR factor, summed over all transition...219 Å2 ps vs. 239 Å2 ps). However, when calculating the IFR factor, summed over all transition energies, affecting the EL linewidth [i.e., Eqn. (1

  18. Course 1: Physics of Protein-DNA Interaction

    NASA Astrophysics Data System (ADS)

    Bruinsma, R. F.

    1 Introduction 1.1 The central dogma and bacterial gene expression 1.2 Molecular structure 2 Thermodynamics and kinetics of repressor-DNA interaction 2.1 Thermodynamics and the lac repressor 2.2 Kinetics of repressor-DNA interaction 3 DNA deformability and protein-DNA interaction 3.1 Introduction 3.2 The worm-like chain 3.3 The RST model 4 Electrostatics in water and protein-DNA interaction 4.1 Macro-ions and aqueous electrostatics 4.2 The primitive model 4.3 Manning condensation 4.4 Counter-ion release and non-specific protein-DNA interaction

  19. The BepiColombo Spacecraft: The Mercury Transfer Module Structure Qualification Test Campaign Description

    NASA Astrophysics Data System (ADS)

    Martin Zurdo, M. J.

    2012-07-01

    The BepiColombo is a space mission to Mercury (ESA in cooperation with Japan Aerospace Exploration Agency). The spacecraft consist of three different structures: two orbiters responsible for the scientific mission (MPO and MMO) and one service module, Mercury Transfer Module (MTM), which provides propulsion and services during the journey to Mercury. Taking into account only the MTM structure, the companies involved are ASTRIUM GERMANY acting as the prime contractor and ASTRIUM UK acting as the co- prime contractor company. EADS CASA Espacio (ECE) in Spain is the company responsible for the final design, manufacturing and qualification of the MTM structure. The test campaign specimen is the MTM core structure, which corresponds to the central cone with the structure floors, shear panels and tank support structure. This test campaign qualifies the primary load path and its primary interfaces; the rest of the MTM structure is qualified by system level vibration test. In order to qualify the MTM structure, three different kinds of qualification tests have been performed: stiffness test, global strength test and local tests in different specific areas. The most relevant test during the campaign is the global strength test case, in which several external loads are introduced (different interfaces) simulating the load introduction for a selected critical flight case. There are two important items in the qualification test campaign: 1. The instrumentation of the structure, with two main functions: to control the specimen under test loads, and to demonstrate the qualification of the structure. 2. The set-up structure, designed by ECE to allow the correct load introduction on each testing case during the whole test campaign. This paper describes the MTM structure test campaign from the definition of the loads applied in each test to the qualification of the complete structure.

  20. Transracial Communication.

    ERIC Educational Resources Information Center

    Smith, Arthur L.

    This book explores and explains communication among different racial groups within the scope of existing communication theory. Following a brief introduction, chapters cover "Directions in Transracial Communication" (definitions, process, structurization, and purpose); "Culture and Transracial Communication" (a viewpoint on…

  1. 40 CFR 86.1505 - Introduction; structure of subpart.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Regulations for Otto-Cycle Heavy-Duty Engines, New Methanol-Fueled Natural Gas-Fueled, and Liquefied Petroleum Gas-Fueled Diesel-Cycle Heavy-Duty Engines, New Otto-Cycle Light-Duty Trucks, and New Methanol-Fueled...

  2. An introduction to NMR-based approaches for measuring protein dynamics

    PubMed Central

    Kleckner, Ian R; Foster, Mark P

    2010-01-01

    Proteins are inherently flexible at ambient temperature. At equilibrium, they are characterized by a set of conformations that undergo continuous exchange within a hierarchy of spatial and temporal scales ranging from nanometers to micrometers and femtoseconds to hours. Dynamic properties of proteins are essential for describing the structural bases of their biological functions including catalysis, binding, regulation and cellular structure. Nuclear magnetic resonance (NMR) spectroscopy represents a powerful technique for measuring these essential features of proteins. Here we provide an introduction to NMR-based approaches for studying protein dynamics, highlighting eight distinct methods with recent examples, contextualized within a common experimental and analytical framework. The selected methods are (1) Real-time NMR, (2) Exchange spectroscopy, (3) Lineshape analysis, (4) CPMG relaxation dispersion, (5) Rotating frame relaxation dispersion, (6) Nuclear spin relaxation, (7) Residual dipolar coupling, (8) Paramagnetic relaxation enhancement. PMID:21059410

  3. Chemical Modification of Polysaccharides

    PubMed Central

    Cumpstey, Ian

    2013-01-01

    This review covers methods for modifying the structures of polysaccharides. The introduction of hydrophobic, acidic, basic, or other functionality into polysaccharide structures can alter the properties of materials based on these substances. The development of chemical methods to achieve this aim is an ongoing area of research that is expected to become more important as the emphasis on using renewable starting materials and sustainable processes increases in the future. The methods covered in this review include ester and ether formation using saccharide oxygen nucleophiles, including enzymatic reactions and aspects of regioselectivity; the introduction of heteroatomic nucleophiles into polysaccharide chains; the oxidation of polysaccharides, including oxidative glycol cleavage, chemical oxidation of primary alcohols to carboxylic acids, and enzymatic oxidation of primary alcohols to aldehydes; reactions of uronic-acid-based polysaccharides; nucleophilic reactions of the amines of chitosan; and the formation of unsaturated polysaccharide derivatives. PMID:24151557

  4. Soluble Dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene Derivatives for Solution-Processed Organic Field-Effect Transistors.

    PubMed

    Sawamoto, Masanori; Kang, Myeong Jin; Miyazaki, Eigo; Sugino, Hiroyoshi; Osaka, Itaru; Takimiya, Kazuo

    2016-02-17

    We demonstrate a new approach to solution-processable dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT) derivatives that can afford good thin-film transistors having mobilities higher than 0.1 cm(2) V(-1) s(-1). The key molecular design strategy is the introduction of one branched alkyl group at the edge of the DNTT core, which improves solubility while retaining semiconducting characteristics in the thin-film state. Dialkylation, i.e., the introduction of two branched alkyl groups on the DNTT core, had a detrimental effect on the semiconducting properties. Although the physicochemical properties of the mono- and dialkylated derivatives at the molecular level were almost the same, the thin-film absorption spectra and the ionization potentials (IPs) were markedly different, indicating that the intermolecular interaction in the thin-film state was affected by the number of alkyl groups. Indeed, the packing structures of the monoalkylated DNTTs in the thin-film state, which were estimated from the XRD patterns, were similar to that of parent DNTT, indicating the existence of the lamella structure with the herringbone packing motif. In sharp contrast, the XRD patterns of the dialkylated DNTT thin films showed poor crystallinity, and the packing structures were significantly different from that of parent DNTT. All the results of structural characterization in the thin-film state and evaluation of device characteristics of the DNTT derivatives with branched alkyl groups indicate that the introduction of a branched alkyl group in the molecular long-axis direction is an effective way to solubilize the rigid, largely π-extended organic semiconducting core without interfering with the semiconducting characteristics in the thin-film state.

  5. Patterns of genetic diversity reveal multiple introductions and recurrent founder effects during range expansion in invasive populations of Geranium carolinianum (Geraniaceae)

    PubMed Central

    Shirk, R Y; Hamrick, J L; Zhang, C; Qiang, S

    2014-01-01

    Genetic diversity, and thus the adaptive potential of invasive populations, is largely based on three factors: patterns of genetic diversity in the species' native range, the number and location of introductions and the number of founding individuals per introduction. Specifically, reductions in genetic diversity (‘founder effects') should be stronger for species with low within-population diversity in their native range and few introductions of few individuals to the invasive range. We test these predictions with Geranium carolinianum, a winter annual herb native to North America and invasive in China. We measure the extent of founder effects using allozymes and microsatellites, and ask whether this is consistent with its colonization history and patterns of diversity in the native range. In the native range, genetic diversity is higher and structure is lower than expected based on life history traits. In China, our results provide evidence for multiple introductions near Nanjing, Jiangsu province, with subsequent range expansion to the west and south. Patterns of genetic diversity across China reveal weak founder effects that are driven largely by low-diversity populations at the expansion front, away from the introduction location. This suggests that reduced diversity in China has resulted from successive founder events during range expansion, and that the loss of genetic diversity in the Nanjing area was mitigated by multiple introductions from diverse source populations. This has implications for the future of G. carolinianum in China, as continued gene flow among populations should eventually increase genetic diversity within the more recently founded populations. PMID:24346497

  6. Bird migratory flyways influence the phylogeography of the invasive brine shrimp Artemia franciscana in its native American range

    PubMed Central

    Muñoz, Joaquín; Amat, Francisco; Green, Andy J.; Figuerola, Jordi

    2013-01-01

    Since Darwin’s time, waterbirds have been considered an important vector for the dispersal of continental aquatic invertebrates. Bird movements have facilitated the worldwide invasion of the American brine shrimp Artemia franciscana, transporting cysts (diapausing eggs), and favouring rapid range expansions from introduction sites. Here we address the impact of bird migratory flyways on the population genetic structure and phylogeography of A. franciscana in its native range in the Americas. We examined sequence variation for two mitochondrial gene fragments (COI and 16S for a subset of the data) in a large set of population samples representing the entire native range of A. franciscana. Furthermore, we performed Mantel tests and redundancy analyses (RDA) to test the role of flyways, geography and human introductions on the phylogeography and population genetic structure at a continental scale. A. franciscana mitochondrial DNA was very diverse, with two main clades, largely corresponding to Pacific and Atlantic populations, mirroring American bird flyways. There was a high degree of regional endemism, with populations subdivided into at least 12 divergent, geographically restricted and largely allopatric mitochondrial lineages, and high levels of population structure (ΦST of 0.92), indicating low ongoing gene flow. We found evidence of human-mediated introductions in nine out of 39 populations analysed. Once these populations were removed, Mantel tests revealed a strong association between genetic variation and geographic distance (i.e., isolation-by-distance pattern). RDA showed that shared bird flyways explained around 20% of the variance in genetic distance between populations and this was highly significant, once geographic distance was controlled for. The variance explained increased to 30% when the factor human introduction was included in the model. Our findings suggest that bird-mediated transport of brine shrimp propagules does not result in substantial ongoing gene flow; instead, it had a significant historical role on the current species phylogeography, facilitating the colonisation of new aquatic environments as they become available along their main migratory flyways. PMID:24255814

  7. Analysis of HIV Type 1 BF Recombinant Sequences from South America Dates the Origin of CRF12_BF to a Recombination Event in the 1970s

    PubMed Central

    Dilernia, Dario A.; Jones, Leandro R.; Pando, Maria A.; Rabinovich, Roberto D.; Damilano, Gabriel D.; Turk, Gabriela; Rubio, Andrea E.; Pampuro, Sandra; Gomez-Carrillo, Manuel

    2011-01-01

    Abstract HIV-1 epidemics in South America are believed to have originated in part from the subtype B epidemic initiated in the Caribbean/North America region. However, circulation of BF recombinants in similar proportions was extensively reported. Information currently shows that many BF recombinants share a recombination structure similar to that found in the CRF12_BF. In the present study, analyzing a set of 405 HIV sequences, we identified the most likely origin of the BF epidemic in an early event of recombination. We found that the subtype B epidemics in South America analyzed in the present study were initiated by a founder event that occurred in the early 1970s, a few years after the introduction of these strains in the Americas. Regarding the F/BF recombinant epidemics, by analyzing a subtype F genomic segment within the viral gene gag present in the majority of the BF recombinants, we found evidence of a geographic divergence very soon after the introduction of subtype F strains in South America. Moreover, through analysis of a subtype B segment present in all the CRF12_BF-like recombination structure, we estimated the circulation of the subtype B strain that gave rise to that recombinant structure around the same time period estimated for the introduction of subtype F strains. The HIV epidemics in South America were initiated in part through a founder event driven by subtype B strains coming from the previously established epidemic in the north of the continent. A second introduction driven by subtype F strains is likely to have encountered the incipient subtype B epidemic that soon after their arrival recombined with them, originating the BF epidemic in the region. These results may explain why in South America the majority of F sequences are found as BF recombinants. PMID:20919926

  8. Evaluating the physiological and behavioral response of a male and female gorilla (Gorilla gorilla gorilla) during an introduction.

    PubMed

    Jacobs, Raechel M; Ross, Stephen R; Wagner, Katherine E; Leahy, Maureen; Meiers, Susan T; Santymire, Rachel M

    2014-01-01

    Prolonged stress responses can lead to infertility and death; therefore monitoring respective indicators like stress-related hormones and behaviors is an important tool in ensuring the health and well-being among zoo-housed animal populations. Changes in social structure, such as the introduction of a new conspecific, can be a source of stress. In April 2010, a sexually mature female western lowland gorilla (Gorilla gorilla gorilla) was brought to Lincoln Park Zoo (LPZ; Chicago, IL) from the Chicago Zoological Park (Brookfield, IL) for a breeding recommendation from the Gorilla Species Survival Plan. Fecal glucocorticoid metabolites (FGMs) were monitored in two gorillas prior to, during and immediately following the social introduction. Reproduction events, such ovarian cyclicity and pregnancy, were monitored using behavior and fecal progestagen metabolite (FPM; female) and fecal androgen metabolite (FAM; male) analyses. Mean (± standard error) FGM concentrations for the male were elevated (P = 0.002) during the introduction (20.61 ± 0.83 ng/g) compared to the pre- and post-introduction phases (11.31 ± 0.48 ng/g and 12.42 ± 0.65 ng/g, respectively). For the female, mean FGM concentrations were lower (P < 0.001) during the post-introduction (17.91 ± 1.07 ng/g) than during the pre- and introduction phases (30.50 ± 3.42 and 27.38 ± 1.51 ng/g, respectively). The female maintained normal FPM cyclicity throughout the study and became pregnant in the post-introduction phase. These results suggest the importance of both behavioral and physiological monitoring of zoo animals and demonstrate the potential stress that can occur during social introductions. Zoo Biol. 33:394-402, 2014. © 2014 Wiley Periodicals Inc. © 2014 Wiley Periodicals, Inc.

  9. Exploring the Structure of Library and Information Science Web Space Based on Multivariate Analysis of Social Tags

    ERIC Educational Resources Information Center

    Joo, Soohyung; Kipp, Margaret E. I.

    2015-01-01

    Introduction: This study examines the structure of Web space in the field of library and information science using multivariate analysis of social tags from the Website, Delicious.com. A few studies have examined mathematical modelling of tags, mainly examining tagging in terms of tripartite graphs, pattern tracing and descriptive statistics. This…

  10. A Participant-Oriented, Research-Based Approach for Design of a Biochemistry Workshop for Faculty at Undergraduate Institutions

    ERIC Educational Resources Information Center

    Owen, Rebecca L.; Breyer, Emelita D.

    2005-01-01

    The Molecular Genetics and Protein Structure and Function workshop is one of a series of workshops offered by the National Science Foundation-funded Center for Workshops in the Chemical Sciences. The workshop provides a hands-on introduction to current topics and techniques in molecular genetics and protein structure/function as applied to…

  11. Bonding and Structure. Independent Learning Project for Advanced Chemistry (ILPAC). Unit S4.

    ERIC Educational Resources Information Center

    Inner London Education Authority (England).

    This unit on chemical bonding is one of 10 first year units produced by the Independent Learning Project for Advanced Chemistry (ILPAC). The unit, which consists of two levels, provides an introduction to the main types of chemical bonding and important aspects of structure. The main emphasis is placed on such topics as ionic and covalent bonding,…

  12. Effectively Serving the Needs of Today's Business Student: The Product Life Cycle Approach to Class Organization

    ERIC Educational Resources Information Center

    Eastman, Jacqueline K.; Aviles, Maria; Hanna, Mark

    2012-01-01

    We illustrate a class organization process utilizing the concept of the Product Life Cycle to meet the needs of today's millennial student. In the Introduction stage of a business course, professors need to build structure to encourage commitment. In the Growth stage, professors need to promote the structure through multiple, brief activities that…

  13. Introduction to natural disturbances and historic range of variation: type, frequency, severity, and post-disturbance structure in central hardwood forests

    Treesearch

    Katie Greenberg; Beverly S. Collins; Henry McNab; Douglas K. Miller; Gary R. Wein

    2015-01-01

    EXCERPT FROM: Natural Disturbances and Historic Range Variation 2015. Throughout the history of upland hardwood forests of the Central Hardwood Region, natural disturbances have been integral to shaping forest structure and composition, and essential in maintaining diverse biotic...

  14. Engagement, empowerment, and job satisfaction before implementing an academic model of shared governance.

    PubMed

    Owen, D C; Boswell, C; Opton, L; Franco, L; Meriwether, C

    2018-06-01

    Baseline information was obtained from a School of Nursing faculty and staff about perceptions of job satisfaction, empowerment, and engagement in the workplace before the introduction of an integrated faculty and staff shared governance system. Governance structure in schools of nursing has the potential to enhance or impose constraints on the work environment for faculty, staff, and stakeholders. RESULTS: Faculty and staff perceptions of job satisfaction and engagement in the workplace before the introduction of a new model of shared governance are presented. Statistical differences were found between faculty and staff responses on the overall or total scales and select subscales, and group patterns of relationships differed. We provided a description of the first shared governance structure derived from the perspective of shared governance as defined and operationalized in Magnet Hospital health care systems and includes administrators, faculty, and staff in decision-making councils. As academia embarks on this change in governance structure from hierarchical to a more flattened approach findings support examining levels of work engagement, structural and psychological empowerment, and job satisfaction as key monitors of the work environment. Copyright © 2018 Elsevier Inc. All rights reserved.

  15. A 125 year history of topographic mapping and GIS in the U.S. Geological Survey 1884-2009, part 2: 1980-2009

    USGS Publications Warehouse

    Usery, E. Lynn; Varanka, Dalia; Finn, Michael P.

    2009-01-01

    The United States Geological Survey (USGS) entered the mainstream of developments in computer-assisted technology for mapping during the 1970s. The introduction by USGS of digital line graphs (DLGs), digital elevation models (DEMs), and land use data analysis (LUDA) nationwide land-cover data provided a base for the rapid expansion of the use of GIS in the 1980s. Whereas USGS had developed the topologically structured DLG data and the Geographic Information Retrieval and Analysis System (GIRAS) for land-cover data, the Map Overlay Statistical System (MOSS), a nontopologically structured GIS software package developed by Autometric, Inc., under contract to the U.S. Fish and Wildlife Service, dominated the use of GIS by federal agencies in the 1970s. Thus, USGS data was used in MOSS, but the topological structure, which later became a requirement for GIS vector datasets, was not used in early GIS applications. The introduction of Esri's ARC/INFO in 1982 changed that, and by the end of the 1980s, topological structure for vector data was essential, and ARC/INFO was the dominant GIS software package used by federal agencies.

  16. Basic Mycology

    ERIC Educational Resources Information Center

    Goodwin, Lilla M.

    1970-01-01

    Discusses activities that can be carried out on a field trip study of mushrooms; follow-up activities in the classroom are suggested. Mushrooms are selected as an introduction to mycology mainly because of their large size and prominent reproductive structures. (BR)

  17. An Unusual Apporach to the Elementary Qualitative Physics Course: Introduction to Space Science

    ERIC Educational Resources Information Center

    Moore, E. Neal

    1975-01-01

    Describes a course, without laboratory, using rudimentary algebra and covering such topics as gravitation, orbital mechanics, atomic structure, geomagnetism, electromagnetic spectrum, theory of relativity, extraterrestrial life, and interstellar travel. (GH)

  18. Impact of water regimes on an experimental community of four desert arbuscular mycorrhizal fungal (AMF) species, as affected by the introduction of a non-native AMF species.

    PubMed

    Symanczik, Sarah; Courty, Pierre-Emmanuel; Boller, Thomas; Wiemken, Andres; Al-Yahya'ei, Mohamed N

    2015-11-01

    Field studies have revealed the impact of changing water regimes on the structure of arbuscular mycorrhizal fungal (AMF) communities, but it is not known what happens to the abundance of individual AMF species within the community when the water conditions in the rhizosphere change. The behavior of four AMF species isolated from the Arabian desert (Diversispora aurantia, Diversispora omaniana, Septoglomus africanum, and an undescribed Paraglomus species) was investigated when assembled in microcosms containing Sorghum bicolor as host plant, and treated with various water regimes. Furthermore, the impact of invasion of these assemblages by Rhizophagus irregularis, an AMF species widely used in commercial inocula, was studied. The abundance of each AMF species in sorghum roots was measured by determining the transcript numbers of their large ribosomal subunit (rLSU) by real-time PCR, using cDNA and species-specific primers. Plant biomass and length of AMF extraradical hyphae were also measured. The abundance of each AMF species within the sorghum roots was influenced by both the water regime and the introduction of R. irregularis. Under dry conditions, the introduction of R. irregularis reduced the total abundance of all native AMF species in roots and also led to a reduction in the amount of extraradical mycelium, as well as to a partial decrease in plant biomass. The results indicate that both water regime and the introduction of an invasive AMF species can strongly alter the structure of an AMF native assemblage with a consequent impact on the entire symbiotic mycorrhizal relationship.

  19. Structural Studies on Varicella Zoster Virus

    DTIC Science & Technology

    1990-08-20

    TABLE OF CONTENTS INTRODUCTION 1 The VZV Genome , 8 VZV Proteins 12 VZV Transcription 14 The Structure of HSV 15 Herpesvirus Expression 16...VZV virion . . . 4 Figure 2. A drawing of the VZV nucleocapsid 6 Figure 3. A comparison of the structure of the genomes of HSV - 1 and VZV 9 Figure 4...VZV, and purified VZ virions probed with antibody against VZV IE62 (the HSV - 1 ICP4 equivalent) . . . 154 xii Figure 48. Autoradiograph of VZV IE62

  20. NDE: An effective approach to improved reliability and safety. A technology survey. [nondestructive testing of aircraft structures

    NASA Technical Reports Server (NTRS)

    Carpenter, J. L., Jr.; Stuhrke, W. F.

    1976-01-01

    Technical abstracts are presented for about 100 significant documents relating to nondestructive testing of aircraft structures or related structural testing and the reliability of the more commonly used evaluation methods. Particular attention is directed toward acoustic emission; liquid penetrant; magnetic particle; ultrasonics; eddy current; and radiography. The introduction of the report includes an overview of the state-of-the-art represented in the documents that have been abstracted.

  1. Structure and Dynamics of End-to-End Loop Formation of the Penta-Peptide Cys-Ala-Gly-Gln-Trp in Implicit Solvents

    DTIC Science & Technology

    2009-01-01

    implicit solvents on peptide structure and dynamics , we performed extensive molecular dynamics simulations on the penta-peptide Cys-Ala-Gly-Gln-Trp. Two...end-to-end distances and dihedral angles obtained from molecular dynamics simulations with implicit solvent models were in a good agreement with those...to maintain the temperature of the systems. Introduction Molecular dynamics (MD) simulation techniques are widely used to study structure and

  2. Standardization of Clinical Skill Evaluation in Physical/Occupational Therapist Education –Effects of Introduction of an Education System Using OSCE–

    PubMed Central

    Sakurai, Hiroaki; Kanada, Yoshikiyo; Sugiura, Yoshito; Motoya, Ikuo; Yamada, Masayuki; Tomita, Masao; Naka, Toru; Teranishi, Toshio; Tanabe, Shigeo; Tsujimura, Toru; Okanishi, Tetsuo

    2013-01-01

    [Purpose] A major issue in physical/occupational therapist education is the improvement of students' clinical techniques. In this study, we introduced an education system using an Objective Structured Clinical Examination (OSCE), and made an attempt at standardization of its evaluation. [Subjects] The subjects were 227 students in the classes of 2008 to 2010 who enrolled at our university between 2004 and 2006, before the introduction of the education system using OSCE, and 221 students in the classes of 2011 to 2013 who enrolled between 2007 and 2009, after the introduction. [Methods] Performances in attitude and skills (performance in clinical training and OSCE) were compared between before and after the introduction of OSCE. OSCE results were compared between before and after clinical trainings at each OSCE Level; and the correlation of between performances in clinical training and OSCE was examined. [Results] Performances in OSCE and clinical training (attitude, skills) were improved by the introduction of the education system using OSCE, but no significant correlation was observed in the relationship between performances in OSCE and clinical training. [Conclusion] Further studies should be conducted aiming at the standardization of clinical skill evaluation in postgraduate education to establish an education system using OSCE. PMID:24259918

  3. Comparison of Health Service Utilization for Febrile Children Before and After Introduction of Malaria Rapid Diagnostic Tests and Artemisinin-Based Combination Therapy in Rural Papua New Guinea.

    PubMed

    Tsukahara, Takahiro; Sugahara, Takuma; Furusawa, Takuro; Hombhanje, Francis Wanak

    2018-01-01

    In Papua New Guinea (PNG), a malaria treatment policy using rapid diagnostic tests (RDTs) plus artemisinin-based combination therapy (ACT) was widely introduced to rural communities in 2012. The objectives of the study were to evaluate the effect of this RDT/ACT introduction to a rural PNG population on health service utilization and to compare factors associated with health service utilization before and after the RDT/ACT introduction. Household surveys with structured questionnaires were conducted before and after the introduction of RDT/ACT in a catchment area of a health center in East Sepik Province, PNG. We interviewed caregivers with children less than 15 years of age and collected data on fever episodes in the preceding 2 weeks. Using propensity score matching, febrile children before the introduction of RDT/ACT were matched to febrile children after the introduction. Then, the adjusted difference in the proportion of health service utilization [i.e., the average treatment effect (ATE) of the introduction of RDT/ACT on health service utilization] was estimated. We also employed a multilevel Poisson regression model to investigate factors influencing the use of health services. Of 4,690 children, 911 (19%) were reported to have a fever episode. The unadjusted proportion of health service utilization was 51.7 and 57.2% before and after the RDT/ACT introduction, respectively. After matching, no significant difference in the health service utilization was observed before and after the introduction of RDT/ACT (ATE: 0.063, 95% confidence interval -0.024 to 0.150). Multilevel regression analysis showed that the consistent factors associated with a higher utilization of health services were severe illness and being female. The utilization of health services was not significantly different before and after the introduction of RDT/ACT. Villagers may have neither sufficient informations on the new protocol nor high acceptance of RDT/ACT. The observed gender bias in health service utilization could be due to female caregivers' preferences toward girls.

  4. On Some Interesting Trends in Research of Steel and Composite Structures

    NASA Astrophysics Data System (ADS)

    Marcinowski, Jakub

    2017-06-01

    This paper is a kind of introduction to the special issue of CEER devoted to metal and composite structures. Papers collected in this issue were ordered from Authors who took part in International Conference on Metal Structures which was held in Zielona Góra in 2016. Selection of Authors and theme of ordered papers were done in cooperation with Metal Structures Section of the Civil Engineering Committee of the Polish Academy of Sciences. Selected papers included in this special issue of CEER were shortly presented in this editorial.

  5. Introduction of inappropriate complementary feeding in the first year of life and associated factors in children with low socioeconomic status.

    PubMed

    Dallazen, Camila; Silva, Sara Araújo da; Gonçalves, Vivian Siqueira Santos; Nilson, Eduardo Augusto Fernandes; Crispim, Sandra Patricia; Lang, Regina Maria Ferreira; Moreira, Júlia Dubois; Tietzmann, Daniela Cardoso; Vítolo, Márcia Regina

    2018-02-19

    The study aimed to identify factors associated with the introduction of inappropriate complementary feeding in the first year of life in children living in municipalities (counties) with low socioeconomic statusl. This was a cross-sectional multicenter study in 1,567 children 12 to 59 months of age in 48 municipalities participating in the Brazil Without Poverty plan in the South of Brazil. A structured questionnaire was applied to the children's parents to obtain socio-demographic information and the age at which inappropriate complementary foods were introduced for the first time in complementary feeding. Prevalence of introduction of sugar before four months of age was 35.5% (n = 497; 95%CI: 33.1-38.0). The prevalence rates for the introduction of cookies/crackers, creamy yogurt, and jelly before six months of age were 20.4% (n = 287; 95%CI: 18.3-22.3), 24.8% (n = 349; 95%CI: 22.4-27.1), and 13.8% (n = 192; 95%CI: 12.0-15.7), respectively. Associations were identified between low maternal schooling (PR = 1.25; 95%CI: 1.03-1.51) and low monthly family income (PR = 1.22; CI95%: 1.01-1.48) and the introduction of inappropriate complementary feeding. The study identified the introduction of inappropriate complementary feeding in the first year of life among children in municipalities with high socioeconomic vulnerability in the South of Brazil, associated with low maternal schooling and low monthly family income.

  6. Fourier Analysis and Structure Determination: Part I: Fourier Transforms.

    ERIC Educational Resources Information Center

    Chesick, John P.

    1989-01-01

    Provides a brief introduction with some definitions and properties of Fourier transforms. Shows relations, ways of understanding the mathematics, and applications. Notes proofs are not included but references are given. First of three part series. (MVL)

  7. INVESTIGATOIN OF CYANOBACTERIA TOXINS IN WATER

    EPA Science Inventory

    Introduction:

    Approximately 80 alkaloid and cyclic peptide toxins produced by various freshwater and marine cyanobacteria (blue-green algae) have been identified and their structures determined. The U. S. Environmental Protection Agency has identified two neurotoxin alkalo...

  8. Information flow and work productivity through integrated information technology

    NASA Technical Reports Server (NTRS)

    Wigand, R. T.

    1985-01-01

    The work environment surrounding integrated office systems is reviewed. The known effects of automated office technologies is synthesized and their known impact on work efficiency is reviewed. These effects are explored with regard to their impact on networks, work flow/processes, as well as organizational structure and power. Particular emphasis is given to structural changes due to the introduction of newer information technologies in organizations. The new information technologies have restructed the average organization's middle banks and, as a consequence, they have shrunk drastically. Organizational pyramids have flattened with fewer levels since executives have realized that they can get ahold of the needed information via the new technologies quicker and directly and do not have to rely on middle-level managers. Power shifts are typically accompanied with the introduction of these technologies resulting in the generation of a new form of organizational power.

  9. Combinatorial games with a pass: a dynamical systems approach.

    PubMed

    Morrison, Rebecca E; Friedman, Eric J; Landsberg, Adam S

    2011-12-01

    By treating combinatorial games as dynamical systems, we are able to address a longstanding open question in combinatorial game theory, namely, how the introduction of a "pass" move into a game affects its behavior. We consider two well known combinatorial games, 3-pile Nim and 3-row Chomp. In the case of Nim, we observe that the introduction of the pass dramatically alters the game's underlying structure, rendering it considerably more complex, while for Chomp, the pass move is found to have relatively minimal impact. We show how these results can be understood by recasting these games as dynamical systems describable by dynamical recursion relations. From these recursion relations, we are able to identify underlying structural connections between these "games with passes" and a recently introduced class of "generic (perturbed) games." This connection, together with a (non-rigorous) numerical stability analysis, allows one to understand and predict the effect of a pass on a game.

  10. The Acceptance Strategy for Nuclear Power Plant In Indonesia

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Suhaemi, Tjipta; Syaukat, Achmad

    2010-06-22

    Indonesia has planned to build nuclear power plants. Some feasibility studies have been conducted intensively. However, the processes of NPP introduction are still uncertain. National Energy Plan in Indonesia, which has been made by some governmental agencies, does not yet give positive impact to the government decision to construct the nuclear power plant (NPP). This paper discusses the process of NPP introduction in Indonesia, which has been colored with debate of stakeholder and has delayed decision for go-nuclear. The technology paradigm is used to promote NPP as an alternative of reliable energy resources. This paradigm should be complemented with internationalmore » politic-economic point of view. The international politic-economic point of view shows that structural powers, consisting of security, production, finance, and knowledge structures, within which the NPP is introduced, have dynamic characteristics. The process of NPP introduction in Indonesia contains some infrastructure development (R and D, legislation, regulation, energy planning, site study, public acceptance efforts, etc), but they need a better coherent NPP implementation program and NPP Acceptance Program. Strategic patterns for NPP acceptance described in this paper are made by considering nuclear regulation development and the interest of basic domestic participation. The first NPP program in Indonesia having proven technology and basic domestic participation is and important milestone toward and optimal national energy-mix.« less

  11. Superporous thermo-responsive hydrogels by combination of cellulose fibers and aligned micropores.

    PubMed

    Halake, Kantappa S; Lee, Jonghwi

    2014-05-25

    In the area of artificial hydrogels, simultaneous engineering of the volume transition characteristics and mechanical properties of stimuli-responsive hydrogels is an important subject. By unrestricted architecting of hierarchical structures, natural hydrogels are able to provide a wide range of swelling and mechanical properties, beyond the limits of artificial hydrogels. Herein, a combination of nanostructures and microstructures was developed to construct superporous hydrogels. Fibers of microfibrillated cellulose (MFC), an eco-friendly reinforcing material, were used as nanostructures, aligned micropores were used as microstructures, and in situ photopolymerization was used to immobilize the two structures together within the gel networks of poly(N-isopropyl acrylamide) (PNIPAm). The introduction of MFC distinctly enhanced volume transition, mainly by decreasing the swelling ratios above the transition. The introduction of directional micropores increased the swelling ratio below the transition and decreased the swelling ratio above the transition, thereby also enhancing the volume transition. Additionally, the formation of aligned micropores achieved fast water infiltration, which is beneficial for superabsorbent applications. The introduction of aligned micropores reduced the elastic modulus, but this could partially be compensated for by reinforcement with MFC. This combination of crystalline nanofibers and aligned micropores has great potential for the development of stimuli-responsive superporous hydrogels outperforming current artificial hydrogels. Copyright © 2014 Elsevier Ltd. All rights reserved.

  12. Interaction of exogenous refractory nanophases with antimony dissolved in liquid iron

    NASA Astrophysics Data System (ADS)

    Burtsev, V. T.; Anuchkin, S. N.; Samokhin, A. V.

    2017-07-01

    The heterophase interaction of Al2O3 refractory nanoparticles with a surfactant impurity (antimony) in the Fe-Sb (0.095 wt %)-O (0.008 wt %) system is studied. It is shown that the introduction of 0.06-0.18 wt % Al2O3 nanoparticles (25-83 nm) into a melt during isothermal holding for up to 1200 s leads to a decrease in the antimony content: the maximum degree of antimony removal is 26 rel %. The sessile drop method is used to investigate the surface tension and the density of Fe, Fe-Sb, and Fe-Sb-Al2O3 melts. The polytherms of the surface tension of these melts have a linear character, the removal of antimony from the Fe-Sb-Al2O3 melts depends on the time of melting in a vacuum induction furnace, and the experimental results obtained reveal the kinetic laws of the structure formation in the surface layers of the melts. The determined melt densities demonstrate that the introduction of antimony into the Fe-O melt causes an increase in its compression by 47 rel %. The structure of the Fe-Sb-O melt after the introduction of Al2O3 nanoparticles depends on the time of melting in a vacuum induction furnace.

  13. Feeding practices of infants through the first year of life in Italy.

    PubMed

    Giovannini, M; Riva, E; Banderali, G; Scaglioni, S; Veehof, S H E; Sala, M; Radaelli, G; Agostoni, C

    2004-04-01

    To investigate infant feeding practices through the first year of life in Italy, and to identify factors associated with the duration of breastfeeding and early introduction of solid foods. Structured phone interviews on feeding practices were conducted with 2450 Italian-speaking mothers randomly selected among women who delivered a healthy-term singleton infant in November 1999 in Italy. Interviews were performed 30 d after delivery and when the infants were aged 3, 6, 9 and 12 mo. Type of breastfeeding was classified according to the WHO criteria. Breastfeeding started in 91.1% of infants. At the age of 6 and 12 mo, respectively, 46.8% and 11.8% of the infants was still breastfed, 68.4% and 27.7% received formula, and 18.3% and 65.2% were given cow's milk. Solids were introduced at the mean age of 4.3 mo (range 1.6-6.5 mo). Introduction of solids occurred before age 3 and 4 mo in 5.6% and 34.2% of infants, respectively. The first solids introduced were fruit (73.1%) and cereals (63.9%). The main factors (negatively) associated with the duration of breastfeeding were pacifier use (p < 0.0001), early introduction of formula (p < 0.0001), lower mother's age (p < 0.01) and early introduction of solids (p = 0.05). Factors (negatively) associated with the introduction of solids foods before the age of 3 mo were mother not having breastfed (p < 0.01), early introduction of formula (p < 0.01), lower infant bodyweight at the age of 1 mo (p = 0.05) and mother smoking (p = 0.05). The duration of breastfeeding in Italy is still inadequate, as well as compliance with international recommendations for timing of introduction of complementary foods. National guidelines, public messages and educational campaigns should be promoted in Italy.

  14. The MRI-Linear Accelerator Consortium: Evidence-Based Clinical Introduction of an Innovation in Radiation Oncology Connecting Researchers, Methodology, Data Collection, Quality Assurance, and Technical Development.

    PubMed

    Kerkmeijer, Linda G W; Fuller, Clifton D; Verkooijen, Helena M; Verheij, Marcel; Choudhury, Ananya; Harrington, Kevin J; Schultz, Chris; Sahgal, Arjun; Frank, Steven J; Goldwein, Joel; Brown, Kevin J; Minsky, Bruce D; van Vulpen, Marco

    2016-01-01

    An international research consortium has been formed to facilitate evidence-based introduction of MR-guided radiotherapy (MR-linac) and to address how the MR-linac could be used to achieve an optimized radiation treatment approach to improve patients' survival, local, and regional tumor control and quality of life. The present paper describes the organizational structure of the clinical part of the MR-linac consortium. Furthermore, it elucidates why collaboration on this large project is necessary, and how a central data registry program will be implemented.

  15. Introduction to molecular topology: basic concepts and application to drug design.

    PubMed

    Gálvez, Jorge; Gálvez-Llompart, María; García-Domenech, Ramón

    2012-09-01

    In this review it is dealt the use of molecular topology (MT) in the selection and design of new drugs. After an introduction of the actual methods used for drug design, the basic concepts of MT are defined, including examples of calculation of topological indices, which are numerical descriptors of molecular structures. The goal is making this calculation familiar to the potential students and allowing a straightforward comprehension of the topic. Finally, the achievements obtained in this field are detailed, so that the reader can figure out the great interest of this approach.

  16. Disease management programs in Germany's statutory health insurance system.

    PubMed

    Busse, Reinhard

    2004-01-01

    The introduction in 1996 of free choice among sickness funds in Germany was accompanied by a "risk structure compensation" (RSC) mechanism based on average spending by age and sex. Because chronically ill people were not adequately taken into account, competition for newly insured consumers concentrated on the healthy. The introduction in 2002 of disease management programs addresses this problem: Insured people in such programs are treated as a separate RSC category, making them a more "attractive" group that no longer generates a deficit. The degree of sickness fund activities and the fierce dispute with physicians are valid indicators that the incentives work.

  17. Experimental Investigation of Free Field and Shock-Initiated Implosion of Composite Structures

    DTIC Science & Technology

    2017-02-06

    From- To) 06 - 02 - 2017 Final Report Nov . 2013 - De c . 2016 4. TITLE AND SUBTITLE Sa. CONTRACT NUMBER Experimental I nvestigation of Free Fie l d...of experimental studies is perfor med to study the implos i on behavior of a variety of different composite structures under varying loading...Introduction Materials Experimental Procedure DIC Technique Collapse Pressure Predictions Specific and Total Impulse

  18. A Structural Health Monitoring Software Tool for Optimization, Diagnostics and Prognostics

    DTIC Science & Technology

    2011-01-01

    A Structural Health Monitoring Software Tool for Optimization, Diagnostics and Prognostics Seth S . Kessler1, Eric B. Flynn2, Christopher T...technology more accessible, and commercially practical. 1. INTRODUCTION Currently successful laboratory non- destructive testing and monitoring...PROGRAM ELEMENT NUMBER 6. AUTHOR( S ) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME( S ) AND ADDRESS(ES

  19. Iranian Naval Forces: A Tale of Two Navies

    DTIC Science & Technology

    2017-02-01

    3 TABLE OF CONTENTS Executive Summary 5 INTRODUCTION A Brief History of Iran’s Naval Forces 7 CHAPTER 1 Organization, Leadership and Personnel...Outlook 42 Additional resources: Posters of Leadership Structure and IRIN/IRGCN Recognition Guide enclosed in inside back pocket. Published by the... leadership and structural changes to improve command and control within their respective areas of responsibility (AOR). The basic elements of these

  20. Interactive Nonlinear Structural Analysis: Enhancement.

    DTIC Science & Technology

    1981-07-31

    3251 Hanover Street Palo Alto, California 94304 i "඙ 8 17 040 . G IS T GRAPHICS- INTERACTIVE STRUCTURAL ANALYSIS VIA THE GIFTS /STAGS SOFTWARE ASSEMBLY...GIST Software Components Page Section 3.0 Introduction * 2 3.1 GIFTS Architecture . . . . . . . . . . . . . 4 3.2 STAGS Architecture . . . 5 3.3 The... GIFTS ->STAGS Adaptor . . . . . . . . . . 6 3.4 The STAGS-> GIFTS Adaptor . . . . . . . . . . 37 3.5 The GIST Control Module . . . . . . . . . . 55 GIST

  1. Economic implications for management of structural retention on harvest units at the Blue River Ranger District, Willamette National Forest, Oregon.

    Treesearch

    James F. Weigand; A. Lynn Burditt

    1992-01-01

    Timber sales offered at the Blue River Ranger District since the 1988 introduction of management for stand structural retention were studied to describe and quantify, where possible, economic implications of that management. Values for the potential lumber from merchantable green trees ranged from $102 to $1114 per acre among the harvest units surveyed thus far....

  2. Dental Corps Structure: Past, Present, and Future

    DTIC Science & Technology

    1993-04-01

    improvement in dental care in Vietnam was the introduction of the modern dental unit with high speed air turbine handpiece . New portable X-ray...not be emW for opt pubilicalsm uati it hua beew defed by Se app•opriate mlitary MVnice ot goveeinit qlay. DENTAL CORPS STRUCTURE: PAST, PRESENT, AND... Dental Corps Structure: Past, Present, and Future Richard D. Shipley, COL, USA a,. :󈧎E CF REPORT ŗb . %:ME CZ’.E.E:,) L; ;F EPCR7 1erMonrn. Oa 5

  3. An effective introduction to structural crystallography using 1D Gaussian atoms

    NASA Astrophysics Data System (ADS)

    Smith, Emily; Evans, Gwyndaf; Foadi, James

    2017-11-01

    The most important quantitative aspects of computational structural crystallography can be introduced in a satisfactory way using 1D truncated and periodic Gaussian functions to represent the atoms in a crystal lattice. This paper describes in detail and demonstrates 1D structural crystallography starting with the definition of such truncated Gaussians. The availability of the computer programme CRONE makes possible the repetition of the examples provided in the paper as well as the creation of new ones.

  4. An Introduction to Structural Reliability Theory

    DTIC Science & Technology

    1989-01-01

    Test Samples psi COV Distribution Remarks Yield stress 66 (XX 0.09 assumed lognormal mill test I containment vesel SA537 GrB Yield stress 󈧗 6W8...straightened shape Tension :32 57.909 0.089 cold straightened shape Tension 9 84.039 0.1124 annealed , alloy steel Tension 9 124,9 0.1796 . quenched...alloys, annealed and quenched, and drawn samples Tension 22 29.50 X 103 0.0072 .. structural steel Compression 22 29.49 X 103 0.0146 ... structural

  5. Theoretical, Experimental, and Computational Evaluation of Several Vane-Type Slow-Wave Structures

    NASA Technical Reports Server (NTRS)

    Wallett, Thomas M.; Qureshi, A. Haq

    1994-01-01

    Several types of periodic vane slow-wave structures were fabricated. The dispersion characteristics were found by theoretical analysis, experimental testing, and computer simulation using the MAFIA code. Computer-generated characteristics agreed to approximately within 2 percent of the experimental characteristics for all structures. The theoretical characteristics, however, deviated increasingly as the width to height ratio became smaller. Interaction impedances were also computed based on the experimental and computer-generated resonance frequency shifts due to the introduction of a perturbing dielectric rod.

  6. Dynamic Stiffness Modeling of Composite Plate and Shell Assemblies

    DTIC Science & Technology

    2013-12-09

    FA8655-10-1-3084 Report 6 Dynamic Stiffness Modelling of Plate and Shell Assemblies 4 Introduction Aerospace structures are generally made up of thin ...Sound and Vibration, 294(1- 2):131–161, 2006. [23] Y. F. Xing and B. Liu. New exact solutions for free vibrations of thin orthotropic rectangular plates ...Structures, 89(5–6):467–475, 2011. [80] A.Y.T. Leung. Dynamic stiffness analysis of laminated composite plates . Thin - Walled Structures, 25:109–133, 1996

  7. History from the ground up: bugs, political economy, and God in Kirby and Spence's Introduction to Entomology (1815-1856).

    PubMed

    Clark, J F M

    2006-03-01

    William Kirby and William Spence's Introduction to Entomology is generally recognized as one of the founding texts of entomological science in English. This essay examines the ideological allegiances of the coauthors of the Introduction. In particular, it analyzes the ideological implications of their divergent opinions on animal instinct. Different vocational pursuits shaped each man's natural history. Spence, a political economist, pursued fact-based science that was shorn of references to religion. Kirby, a Tory High Churchman, placed revelation at the very heart of his natural history. His strong commitment to partisan sectarianism cautions against reference to a homogeneous "natural theology" that was an agent of mediation. Fissures in the "common intellectual context" reached beyond the clash between natural theologians and radical anatomists to render the intellectual edifice of natural theology structurally less sound for the future.

  8. Wide-Field Infrared Survey Telescope (WFIRST) Integrated Modeling

    NASA Technical Reports Server (NTRS)

    Liu, Kuo-Chia; Blaurock, Carl

    2017-01-01

    Contents: introduction to WFIRST (Wide-Field Infrared Survey Telescope) and integrated modeling; WFIRST stability requirement summary; instability mitigation strategies; dynamic jitter results; STOP (structural-thermal-optical performance) (thermal distortion) results; STOP and jitter capability limitations; model validation philosophy.

  9. Soak Up the Rain New England Webinar Series: National Stormwater Calculator

    EPA Science Inventory

    Presenters will provide an introduction to the most recent EPA green infrastructure tools to R1 stakeholders; and their use in making decisions about implementing green infrastructure. We will discuss structuring your green infrastructure decision, finding appropriate information...

  10. Relating Functional Groups to the Periodic Table

    ERIC Educational Resources Information Center

    Struyf, Jef

    2009-01-01

    An introduction to organic chemistry functional groups and their ionic variants is presented. Functional groups are ordered by the position of their specific (hetero) atom in the periodic table. Lewis structures are compared with their corresponding condensed formulas. (Contains 5 tables.)

  11. An Introduction to Database Structure and Database Machines.

    ERIC Educational Resources Information Center

    Detweiler, Karen

    1984-01-01

    Enumerates principal management objectives of database management systems (data independence, quality, security, multiuser access, central control) and criteria for comparison (response time, size, flexibility, other features). Conventional database management systems, relational databases, and database machines used for backend processing are…

  12. INDOOR AIR VAPOR INTRUSION SEMINAR INTRODUCTION

    EPA Science Inventory

    This seminar is sponsored by the ORD in collaboration with the Office of Solid Waste and Emergency Response. The goal of this seminar is to present information and guidance to evaluate, assess and characterize chemical vapor pathways migrating into structures resulting from conta...

  13. Curriculum Reform and Supporting Structures at Schools: Challenges for Life Skills Planning for Secondary School Students in China (with Particular Reference to Hong Kong)

    ERIC Educational Resources Information Center

    Lee, John Chi-Kin

    2017-01-01

    Demand has risen for the introduction of career education in senior secondary schooling to enhance students' transition from study to work. Against such a background, this paper aims to discuss the curriculum reforms and supporting structures in schools and to explore the challenges of life skills planning for secondary school students in China…

  14. Novel Routes to Tune Thermal Conductivities and Thermoelectric Properties of Materials

    DTIC Science & Technology

    2012-11-15

    expand the possibilities of borides as functional compou nds. A series of indium-free novel TCO compounds with novel crystal structures, has...powerful methods for modification were demonstrated in the borides , silicides and oxides. Introduction: The goal of this project is to...the possibility to modify the crystal structures can expand the possibilities of borides as functional compounds. A series of indium-free novel TCO

  15. Guided Bone Regeneration in Long-Bone Defects with a Structural Hydroxyapatite Graft and Collagen Membrane

    DTIC Science & Technology

    2013-01-01

    Praetorius, F. Guided tissue regeneration using de- gradable and nondegradable membranes in rabbit tibia. Clin Oral Implants Res 4, 172, 1993. 8. Queiroz... Regeneration of periodontal tissues : combinations of barrier membranes and grafting materials–biological foundation and preclinical evi- dence: a...structural graft provides benefits for bone tissue regeneration in terms of early interfacial integration. Introduction The treatment of large-bone defects

  16. Ada in Introductory Computer Science Courses

    DTIC Science & Technology

    1993-01-01

    Ada by Daniel F. Stubbs and Neil W. Webre Course Objective: To introduce the students to the basic classical data structures of computer science...Introduction to Ada, Chapman & Hall, 1993, London Dale/Weems/McCormick, Programming and Problem Solving with Ada, D. C. Heath and Company, 1994, MA Feldman...Daniel F. Stubbs and Neil W. Webre - Course Objective: To introduce the students to the basic classical data structures of computer science

  17. Introduction to Solid Rocket Propulsion

    DTIC Science & Technology

    2004-01-01

    totally valid. Fluid-“ structure ” coupling: structure is understood here as the assembly of all the solid parts of the motor: restrictors, grain, case...Conference and Exhibit, San Diego, CA, July 12, 1995. ASSM/POP Program [10] Fonctionnement des moteurs à propergol solide segmentés pour lanceurs ...spatiaux, Colloque CNES/ONERA, Châtillon, FR, Dec. 8-9, 1992. [11] Fonctionnement des moteurs à propergol solide segmentés pour lanceurs spatiaux

  18. QCD studies in ep collisions

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Smith, W.H.

    1997-06-01

    These lectures describe QCD physics studies over the period 1992--1996 from data taken with collisions of 27 GeV electrons and positrons with 820 GeV protons at the HERA collider at DESY by the two general-purpose detectors H1 and ZEUS. The focus of these lectures is on structure functions and jet production in deep inelastic scattering, photoproduction, and diffraction. The topics covered start with a general introduction to HERA and ep scattering. Structure functions are discussed. This includes the parton model, scaling violation, and the extraction of F{sub 2}, which is used to determine the gluon momentum distribution. Both low andmore » high Q{sup 2} regimes are discussed. The low Q{sup 2} transition from perturbative QCD to soft hadronic physics is examined. Jet production in deep inelastic scattering to measure {alpha}{sub s}, and in photoproduction to study resolved and direct photoproduction, is also presented. This is followed by a discussion of diffraction that begins with a general introduction to diffraction in hadronic collisions and its relation to ep collisions, and moves on to deep inelastic scattering, where the structure of diffractive exchange is studied, and in photoproduction, where dijet production provides insights into the structure of the Pomeron. 95 refs., 39 figs.« less

  19. Investigation on the electromagnetic centring technique in compressor with labyrinth seal structure

    NASA Astrophysics Data System (ADS)

    Zhang, W.; Feng, C.; Cheng, J.; Feng, Q.; Wu, W.

    2017-08-01

    At present, the piston of compressors with labyrinth seal structure generally runs eccentrically, which causes uneven radial clearance, serious leakages and lower volumetric efficiency. This has become an urgent problem in the development of labyrinth compressors. In this study, electromagnetic levitation technology was introduced to achieve concentric centering between the piston and cylinder, and the conventional cantilever structure for the piston centering was replaced by a simple support structure using the through-piston rod. Furthermore, the simulation model of the electromagnetic centering system was established and the experimental prototype was built. The mathematical simulation model was verified by comparing simulated and tested results. Then, the centering effect of the system was assessed and the variation of the leakage in the compressor was studied by models using dynamic mesh technology. The results showed that the radial clearance between piston and cylinder can be maintained in the range of -0.3 mm to 0.3 mm through the electromagnetic centering control. In addition, the inner leakage of the compressor was quite appreciable without the electromagnetic control. However, it was reduced by 1.8 times with the introduction of the electromagnetic control. Thus, it can be concluded that the precise centering between the piston and the cylinder can be achieved by the introduction of the electromagnetic centering technique.

  20. Parallel computations and control of adaptive structures

    NASA Technical Reports Server (NTRS)

    Park, K. C.; Alvin, Kenneth F.; Belvin, W. Keith; Chong, K. P. (Editor); Liu, S. C. (Editor); Li, J. C. (Editor)

    1991-01-01

    The equations of motion for structures with adaptive elements for vibration control are presented for parallel computations to be used as a software package for real-time control of flexible space structures. A brief introduction of the state-of-the-art parallel computational capability is also presented. Time marching strategies are developed for an effective use of massive parallel mapping, partitioning, and the necessary arithmetic operations. An example is offered for the simulation of control-structure interaction on a parallel computer and the impact of the approach presented for applications in other disciplines than aerospace industry is assessed.

  1. Structure and anti-structure in the culture-bound syndromes: The Malay case.

    PubMed

    Lee, R L

    1981-09-01

    Turner's concepts of structure and anti-structure are applied to the culture-bound syndromes to demonstrate that they are dialectical aspects of cultural reality, The Malay cases of amok, latah and possession hysteria are discussed as instances of anti-structural behaviors that dramatize role-reversals and role-enhancement. The performers of these behaviors are not subjected to the Malay code of moral conduct. The supernatural ethos in Malay culture plays an important role in shaping tolerance towards them. Although this tolerance has been gradually eroded as a result of the introduction of Western psychiatry, the anti-structural status of these syndromes has not faded away but has assumed new meanings in terms of psychopathology.

  2. An Introduction to Biological NMR Spectroscopy*

    PubMed Central

    Marion, Dominique

    2013-01-01

    NMR spectroscopy is a powerful tool for biologists interested in the structure, dynamics, and interactions of biological macromolecules. This review aims at presenting in an accessible manner the requirements and limitations of this technique. As an introduction, the history of NMR will highlight how the method evolved from physics to chemistry and finally to biology over several decades. We then introduce the NMR spectral parameters used in structural biology, namely the chemical shift, the J-coupling, nuclear Overhauser effects, and residual dipolar couplings. Resonance assignment, the required step for any further NMR study, bears a resemblance to jigsaw puzzle strategy. The NMR spectral parameters are then converted into angle and distances and used as input using restrained molecular dynamics to compute a bundle of structures. When interpreting a NMR-derived structure, the biologist has to judge its quality on the basis of the statistics provided. When the 3D structure is a priori known by other means, the molecular interaction with a partner can be mapped by NMR: information on the binding interface as well as on kinetic and thermodynamic constants can be gathered. NMR is suitable to monitor, over a wide range of frequencies, protein fluctuations that play a crucial role in their biological function. In the last section of this review, intrinsically disordered proteins, which have escaped the attention of classical structural biology, are discussed in the perspective of NMR, one of the rare available techniques able to describe structural ensembles. This Tutorial is part of the International Proteomics Tutorial Programme (IPTP 16 MCP). PMID:23831612

  3. Clonal sets of a binary relation

    NASA Astrophysics Data System (ADS)

    Zedam, Lemnaouar; Pérez-Fernández, Raúl; Bouremel, Hassane; De Baets, Bernard

    2018-05-01

    In a recent paper, we have introduced the notion of clone relation of a given binary relation. Intuitively, two elements are said to be "clones" if they are related in the same way w.r.t. every other element. In this paper, we generalize this notion from pairs of elements to sets of elements of any cardinality, resulting in the introduction of clonal sets. We investigate the most important properties of clonal sets, paying particular attention to the introduction of the clonal closure operator, to the analysis of the (lattice) structure of the set of clonal sets and to a distance metric expressing how close two elements are to being clones.

  4. Zika Virus: The Agent and Its Biology, With Relevance to Pathology.

    PubMed

    Medin, Carey L; Rothman, Alan L

    2017-01-01

    Once obscure, Zika virus (ZIKV) has attracted significant medical and scientific attention in the past year because of large outbreaks associated with the recent introduction of this virus into the Western hemisphere. In particular, the occurrence of severe congenital infections and cases of Guillain-Barré syndrome has placed this virus squarely in the eyes of clinical and anatomic pathologists. This review article provides a basic introduction to ZIKV, its genetics, its structural characteristics, and its biology. A multidisciplinary effort will be essential to establish clinicopathologic correlations of the basic virology of ZIKV in order to advance development of diagnostics, therapeutics, and vaccines.

  5. Cell prestress. II. Contribution of microtubules

    NASA Technical Reports Server (NTRS)

    Stamenovic, Dimitrije; Mijailovich, Srboljub M.; Tolic-Norrelykke, Iva Marija; Chen, Jianxin; Wang, Ning; Ingber, D. E. (Principal Investigator)

    2002-01-01

    The tensegrity model hypothesizes that cytoskeleton-based microtubules (MTs) carry compression as they balance a portion of cell contractile stress. To test this hypothesis, we used traction force microscopy to measure traction at the interface of adhering human airway smooth muscle cells and a flexible polyacrylamide gel substrate. The prediction is that if MTs balance a portion of contractile stress, then, upon their disruption, the portion of stress balanced by MTs would shift to the substrate, thereby causing an increase in traction. Measurements were done first in maximally activated cells (10 microM histamine) and then again after MTs had been disrupted (1 microM colchicine). We found that after disruption of MTs, traction increased on average by approximately 13%. Because in activated cells colchicine induced neither an increase in intracellular Ca(2+) nor an increase in myosin light chain phosphorylation as shown previously, we concluded that the observed increase in traction was a result of load shift from MTs to the substrate. In addition, energy stored in the flexible substrate was calculated as work done by traction on the deformation of the substrate. This result was then utilized in an energetic analysis. We assumed that cytoskeleton-based MTs are slender elastic rods supported laterally by intermediate filaments and that MTs buckle as the cell contracts. Using the post-buckling equilibrium theory of Euler struts, we found that energy stored during buckling of MTs was quantitatively consistent with the measured increase in substrate energy after disruption of MTs. This is further evidence supporting the idea that MTs are intracellular compression-bearing elements.

  6. The ETD-like fragmentation for small molecules

    USDA-ARS?s Scientific Manuscript database

    Introduction (137) Flavonoids are a class of plant and fungus secondary metabolites (three-ring structure C6-C3-C6 with various substitutions) involved in many functions such as pigmentation, UV filtration, symbiotic nitrogen fixation, cell cycle inhibitors, and defense mechanisms. These polyphenoli...

  7. Comparison of burbot populations across adjacent native and introduced ranges

    USGS Publications Warehouse

    Walters, Annika W.; Mandeville, Elizabeth G.; Saunders, W. Carl; Gerrity, Paul C.; Skorupski, Joseph A.; Underwood, Zachary E.; Gardunio, Eric I.

    2017-01-01

    Introduced species are a threat to biodiversity. Burbot, Lota lota, a fish native to the Wind River Drainage, Wyoming and a species of conservation concern, have been introduced into the nearby Green River Drainage, Wyoming, where they are having negative effects on native fish species. We compared these native and introduced burbot populations to evaluate potential mechanisms that could be leading to introduction success. We examined genetic ancestry, physical habitat characteristics, community composition, and burbot abundance, relative weight, and size structure between the native and introduced range to elucidate potential differences. The origin of introduced burbot in Flaming Gorge Reservoir is most likely Boysen Reservoir and several nearby river populations in the native Wind River Drainage. Burbot populations did not show consistent differences in abundance, size structure, and relative weight between drainages, though Fontenelle Reservoir, in the introduced drainage, had the largest burbot. There were also limited environmental and community composition differences, though reservoirs in the introduced drainage had lower species richness and a higher percentage of non-native fish species than the reservoir in the native drainage. Burbot introduction in the Green River Drainage is likely an example of reservoir construction creating habitat with suitable environmental conditions to allow a southwards range expansion of this cold-water species. An understanding of the factors driving introduction success can allow better management of species, both in their introduced and native range.

  8. Nanoporous microbead supported bilayers: stability, physical characterization, and incorporation of functional transmembrane proteins.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Davis, Ryan W.; Brozik, James A.; Brozik, Susan Marie

    2007-03-01

    The introduction of functional transmembrane proteins into supported bilayer-based biomimetic systems presents a significant challenge for biophysics. Among the various methods for producing supported bilayers, liposomal fusion offers a versatile method for the introduction of membrane proteins into supported bilayers on a variety of substrates. In this study, the properties of protein containing unilamellar phosphocholine lipid bilayers on nanoporous silica microspheres are investigated. The effects of the silica substrate, pore structure, and the substrate curvature on the stability of the membrane and the functionality of the membrane protein are determined. Supported bilayers on porous silica microspheres show a significant increasemore » in surface area on surfaces with structures in excess of 10 nm as well as an overall decrease in stability resulting from increasing pore size and curvature. Comparison of the liposomal and detergent-mediated introduction of purified bacteriorhodopsin (bR) and the human type 3 serotonin receptor (5HT3R) are investigated focusing on the resulting protein function, diffusion, orientation, and incorporation efficiency. In both cases, functional proteins are observed; however, the reconstitution efficiency and orientation selectivity are significantly enhanced through detergent-mediated protein reconstitution. The results of these experiments provide a basis for bulk ionic and fluorescent dye-based compartmentalization assays as well as single-molecule optical and single-channel electrochemical interrogation of transmembrane proteins in a biomimetic platform.« less

  9. Synthesis, activity, and structure--activity relationship studies of novel cationic lipids for DNA transfer.

    PubMed

    Byk, G; Dubertret, C; Escriou, V; Frederic, M; Jaslin, G; Rangara, R; Pitard, B; Crouzet, J; Wils, P; Schwartz, B; Scherman, D

    1998-01-15

    We have designed and synthesized original cationic lipids for gene delivery. A synthetic method on solid support allowed easy access to unsymmetrically monofunctionalized polyamine building blocks of variable geometries. These polyamine building blocks were introduced into cationic lipids. To optimize the transfection efficiency in the novel series, we have carried out structure-activity relationship studies by introduction of variable-length lipids, of variable-length linkers between lipid and cationic moiety, and of substituted linkers. We introduce the concept of using the linkers within cationic lipids molecules as carriers of side groups harboring various functionalities (side chain entity), as assessed by the introduction of a library composed of cationic entities, additional lipid chains, targeting groups, and finally the molecular probes rhodamine and biotin for cellular traffic studies. The transfection activity of the products was assayed in vitro on Hela carcinoma, on NIH3T3, and on CV1 fibroblasts and in vivo on the Lewis Lung carcinoma model. Products from the series displayed high transfection activities. Results indicated that the introduction of a targeting side chain moiety into the cationic lipid is permitted. A primary physicochemical characterization of the DNA/lipid complexes was demonstrated with this leading compound. Selected products from the series are currently being developed for preclinical studies, and the labeled lipopolyamines can be used to study the intracellular traffic of DNA/cationic lipid complexes.

  10. The Acceptance Strategy for Nuclear Power Plant In Indonesia

    NASA Astrophysics Data System (ADS)

    Suhaemi, Tjipta; Syaukat, Achmad

    2010-06-01

    THE ACCEPTANCE STRATEGY FOR NUCLEAR POWER PLANT IN INDONESIA. Indonesia has planned to build nuclear power plants. Some feasibility studies have been conducted intensively. However, the processes of NPP introduction are still uncertain. National Energy Plan in Indonesia, which has been made by some governmental agencies, does not yet give positive impact to the government decision to construct the nuclear power plant (NPP). This paper discusses the process of NPP introduction in Indonesia, which has been colored with debate of stakeholder and has delayed decision for go-nuclear. The technology paradigm is used to promote NPP as an alternative of reliable energy resources. This paradigm should be complemented with international politic-economic point of view. The international politic-economic point of view shows that structural powers, consisting of security, production, finance, and knowledge structures, within which the NPP is introduced, have dynamic characteristics. The process of NPP introduction in Indonesia contains some infrastructure development (R&D, legislation, regulation, energy planning, site study, public acceptance efforts, etc), but they need a better coherent NPP implementation program and NPP Acceptance Program. Strategic patterns for NPP acceptance described in this paper are made by considering nuclear regulation development and the interest of basic domestic participation. The first NPP program in Indonesia having proven technology and basic domestic participation is and important milestone toward and optimal national energy-mix.

  11. Rational Design of Orthogonal Multipolar Interactions with Fluorine in Protein–Ligand Complexes

    DOE PAGES

    Pollock, Jonathan; Borkin, Dmitry; Lund, George; ...

    2015-08-19

    Multipolar interactions involving fluorine and the protein backbone have been frequently observed in protein–ligand complexes. Such fluorine–backbone interactions may substantially contribute to the high affinity of small molecule inhibitors. Here we found that introduction of trifluoromethyl groups into two different sites in the thienopyrimidine class of menin–MLL inhibitors considerably improved their inhibitory activity. In both cases, trifluoromethyl groups are engaged in short interactions with the backbone of menin. In order to understand the effect of fluorine, we synthesized a series of analogues by systematically changing the number of fluorine atoms, and we determined high-resolution crystal structures of the complexes withmore » menin. Here, we found that introduction of fluorine at favorable geometry for interactions with backbone carbonyls may improve the activity of menin–MLL inhibitors as much as 5- to 10-fold. In order to facilitate the design of multipolar fluorine–backbone interactions in protein–ligand complexes, we developed a computational algorithm named FMAP, which calculates fluorophilic sites in proximity to the protein backbone. We demonstrated that FMAP could be used to rationalize improvement in the activity of known protein inhibitors upon introduction of fluorine. Furthermore, FMAP may also represent a valuable tool for designing new fluorine substitutions and support ligand optimization in drug discovery projects. Analysis of the menin–MLL inhibitor complexes revealed that the backbone in secondary structures is particularly accessible to the interactions with fluorine. Lastly, considering that secondary structure elements are frequently exposed at protein interfaces, we postulate that multipolar fluorine–backbone interactions may represent a particularly attractive approach to improve inhibitors of protein–protein interactions.« less

  12. Structure models: From shell model to ab initio methods. A brief introduction to microscopic theories for exotic nuclei

    NASA Astrophysics Data System (ADS)

    Bacca, Sonia

    2016-04-01

    A brief review of models to describe nuclear structure and reactions properties is presented, starting from the historical shell model picture and encompassing modern ab initio approaches. A selection of recent theoretical results on observables for exotic light and medium-mass nuclei is shown. Emphasis is given to the comparison with experiment and to what can be learned about three-body forces and continuum properties.

  13. Preliminary Design of a Consultation Knowledge-Based System for the Minimization of Distortion in Welded Structures

    DTIC Science & Technology

    1989-02-01

    which capture the knowledge of such experts. These Expert Systems, or Knowledge-Based Systems’, differ from the usual computer programming techniques...their applications in the fields of structural design and welding is reviewed. 5.1 Introduction Expert Systems, or KBES, are computer programs using Al...procedurally constructed as conventional computer programs usually are; * The knowledge base of such systems is executable, unlike databases 3 "Ill

  14. Estimating the Effects of Damping Treatments on the Vibration of Complex Structures

    DTIC Science & Technology

    2012-09-26

    26 4.3 Literature review 26 4.3.1 CLD Theory 26 4.3.2 Temperature Profiling 28 4.4 Constrained Layer Damping Analysis 29 4.5 Results 35...Coordinate systems and length scales are noted. Constraining layer, viscoelastic layer and base layer pertain to the nomenclature used through CLD ...for vibrational damping 4.1 Introduction Constrained layer damping ( CLD ) treatment systems are widely used in complex structures to dissipate

  15. Holographic Structuring of Elastomer Actuator: First True Monolithic Tunable Elastomer Optics.

    PubMed

    Ryabchun, Alexander; Kollosche, Matthias; Wegener, Michael; Sakhno, Oksana

    2016-12-01

    Volume diffraction gratings (VDGs) are inscribed selectively by diffusive introduction of benzophenone and subsequent UV-holographic structuring into an electroactive dielectric elastomer actuator (DEA), to afford a continuous voltage-controlled grating shift of 17%. The internal stress coupling of DEA and optical domain allows for a new generation of true monolithic tunable elastomer optics with voltage controlled properties. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. From structure to structural dynamics: Ahmed Zewail's legacy.

    PubMed

    Chergui, Majed; Thomas, John Meurig

    2017-07-01

    In this brief tribute to Ahmed Zewail, we highlight and place in the historical context, several of the major achievements that he and his colleagues have made in Femtochemistry (of which he was the principal instigator) and his introduction of ultrafast electron scattering, diffraction, microscopy and spectroscopy. By achieving a sub-picosecond temporal resolution, coupled with a picometer spatial resolution, he revolutionised our understanding of the corpus of chemical, physical, biological and materials science systems.

  17. A New Interface Specification Methodology and its Application to Transducer Synthesis

    DTIC Science & Technology

    1988-05-01

    structural, and physical. Within each domain descriptive methods are distinguished by the level of abstraction they emphasize. The Gajski -Kuhn Y...4.2. The Gajski -Kuhn Y-chart’s three axes correspond to three different domains for describing designs: behavioral, structural, and physical. The...Gajski83] D. Gajski , R. Kuhn, Guest Editors’ Introduction: New VLSI Tools, IEEE Computer, Vol. 16, No. 12, December 1983. [Girczyc85] E. Girczyc, R

  18. Engineering glycoside hydrolase stability by the introduction of zinc binding

    DOE PAGES

    Ellinghaus, Thomas L.; Pereira, Jose H.; McAndrew, Ryan P.; ...

    2018-06-27

    The development of robust enzymes, in particular cellulases, is a key step in the success of biological routes to `second-generation' biofuels. The typical sources of the enzymes used to degrade biomass include mesophilic and thermophilic organisms. The endoglucanase J30 from glycoside hydrolase family 9 was originally identified through metagenomic analyses of compost-derived bacterial consortia. These studies, which were tailored to favor growth on targeted feedstocks, have already been shown to identify cellulases with considerable thermal tolerance. The amino-acid sequence of J30 shows comparably low identity to those of previously analyzed enzymes. As an enzyme that combines a well measurable activitymore » with a relatively low optimal temperature (50°C) and a modest thermal tolerance, it offers the potential for structural optimization aimed at increased stability. Here, the crystal structure of wild-type J30 is presented along with that of a designed triple-mutant variant with improved characteristics for industrial applications. Through the introduction of a structural Zn 2+ site, the thermal tolerance was increased by more than 10°C and was paralleled by an increase in the catalytic optimum temperature by more than 5°C.« less

  19. Engineering glycoside hydrolase stability by the introduction of zinc binding

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ellinghaus, Thomas L.; Pereira, Jose H.; McAndrew, Ryan P.

    The development of robust enzymes, in particular cellulases, is a key step in the success of biological routes to `second-generation' biofuels. The typical sources of the enzymes used to degrade biomass include mesophilic and thermophilic organisms. The endoglucanase J30 from glycoside hydrolase family 9 was originally identified through metagenomic analyses of compost-derived bacterial consortia. These studies, which were tailored to favor growth on targeted feedstocks, have already been shown to identify cellulases with considerable thermal tolerance. The amino-acid sequence of J30 shows comparably low identity to those of previously analyzed enzymes. As an enzyme that combines a well measurable activitymore » with a relatively low optimal temperature (50°C) and a modest thermal tolerance, it offers the potential for structural optimization aimed at increased stability. Here, the crystal structure of wild-type J30 is presented along with that of a designed triple-mutant variant with improved characteristics for industrial applications. Through the introduction of a structural Zn 2+ site, the thermal tolerance was increased by more than 10°C and was paralleled by an increase in the catalytic optimum temperature by more than 5°C.« less

  20. Analysis and Design of the NASA Langley Cryogenic Pressure Box

    NASA Technical Reports Server (NTRS)

    Glass, David E.; Stevens, Jonathan C.; Vause, R. Frank; Winn, Peter M.; Maguire, James F.; Driscoll, Glenn C.; Blackburn, Charles L.; Mason, Brian H.

    1999-01-01

    A cryogenic pressure box was designed and fabricated for use at NASA Langley Research Center (LaRC) to subject 72 in. x 60 in. curved panels to cryogenic temperatures and biaxial tensile loads. The cryogenic pressure box is capable of testing curved panels down to -423 F (20K) with 54 psig maximum pressure on the concave side, and elevated temperatures and atmospheric pressure on the convex surface. The internal surface of the panel is cooled by high pressure helium as that is cooled to -423 F by liquid helium heat exchangers. An array of twelve independently controlled fans circulate the high pressure gaseous helium to provide uniform cooling on the panel surface. The load introduction structure, consisting of four stainless steel load plates and numerous fingers attaching the load plates to the test panel, is designed to introduce loads into the test panel that represent stresses that will he observed in the actual tank structure. The load plates are trace cooled with liquid nitrogen to reduce thermal gradients that may result in bending the load plates, and thus additional stresses in the test panel. The design of the cryogenic systems, load introduction structure, and control system are discussed in this report.

  1. Hybrid Organic-Inorganic Perovskite Photodetectors.

    PubMed

    Tian, Wei; Zhou, Huanping; Li, Liang

    2017-11-01

    Hybrid organic-inorganic perovskite materials garner enormous attention for a wide range of optoelectronic devices. Due to their attractive optical and electrical properties including high optical absorption coefficient, high carrier mobility, and long carrier diffusion length, perovskites have opened up a great opportunity for high performance photodetectors. This review aims to give a comprehensive summary of the significant results on perovskite-based photodetectors, focusing on the relationship among the perovskite structures, device configurations, and photodetecting performances. An introduction of recent progress in various perovskite structure-based photodetectors is provided. The emphasis is placed on the correlation between the perovskite structure and the device performance. Next, recent developments of bandgap-tunable perovskite and hybrid photodetectors built from perovskite heterostructures are highlighted. Then, effective approaches to enhance the stability of perovskite photodetector are presented, followed by the introduction of flexible and self-powered perovskite photodetectors. Finally, a summary of the previous results is given, and the major challenges that need to be addressed in the future are outlined. A comprehensive summary of the research status on perovskite photodetectors is hoped to push forward the development of this field. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. SWAHILI LANGUAGE HANDBOOK.

    ERIC Educational Resources Information Center

    POLOME, EDGAR C.

    THIS INTRODUCTION TO THE STRUCTURE AND BACKGROUND OF THE SWAHILI LANGUAGE WAS WRITTEN FOR THE NON-SPECIALIST. ALTHOUGH THE LINGUISTIC TERMINOLOGY USED IN THE DESCRIPTION OF THE LANGUAGE ASSUMES THE READER HAS HAD SOME TRAINING IN LINGUISTICS, THIS HANDBOOK PROVIDES BASIC LINGUISTIC AND SOCIOLINGUISTIC INFORMATION FOR STUDENTS OF AFRICAN CULTURE…

  3. Carpentry Specialist.

    ERIC Educational Resources Information Center

    Air Force Training Command, Sheppard AFB, TX.

    This instructional package is intended for use in training Air Force personnel enrolled in a program for apprentice carpenters. Training includes an introduction to carpentry and provides instruction in the use of carpentry hand, portable power, and shop tools; construction and maintenance of wood structures; installation of building hardware; and…

  4. Introduction to light and optical theories

    USDA-ARS?s Scientific Manuscript database

    Light scattering occurs as a result of the interaction of photons with matter, and it is dependent on the structure and chemical composition of the material. Over the past 15 years, significant progress and numerous applications in light scattering have been made for assessing properties, quality an...

  5. Developing a methodology to inspect and assess conditions of short span structures on county roads in Wyoming.

    DOT National Transportation Integrated Search

    2015-12-01

    Ever since the introduction of the National Bridge Inspection Standards (NBIS) in 1971, there has been a : tremendous amount of effort put into bridge rehabilitation programs and safety inspections. The : Wyoming Department of Transportation (WYDOT) ...

  6. An Introduction to Greenhouse Production. Second Edition.

    ERIC Educational Resources Information Center

    McMahon, Robert W.

    This student manual is presented in its first revision, providing a current, basic text for those preparing for greenhouse and floriculture work. Its fourteen chapters are: Overview of the Greenhouse Industry; Greenhouse Structures; Controlling the Greenhouse Environment; Greenhouse Equipment and Lighting; Greenhouse Irrigation Systems; Root Media…

  7. Volcanoes.

    ERIC Educational Resources Information Center

    Tilling, Robert I.

    One of a series of general interest publications on science topics, this booklet provides a non-technical introduction to the subject of volcanoes. Separate sections examine the nature and workings of volcanoes, types of volcanoes, volcanic geological structures such as plugs and maars, types of eruptions, volcanic-related activity such as geysers…

  8. Publications 1 & 2 (Yearbook) Curriculum Guide. Bulletin 1816.

    ERIC Educational Resources Information Center

    Louisiana State Dept. of Education, Baton Rouge.

    This guide for teachers is intended to establish a standard curriculum for teaching yearbook production in Louisiana high schools through two courses (Publications 1 and Publications 2) structured as academically oriented electives. Following a foreword, acknowledgements, philosophy, introduction, and course descriptions, the sections are as…

  9. Development Challenges and Opportunities Confronting Economies in Transition

    ERIC Educational Resources Information Center

    Estes, Richard J.

    2007-01-01

    "Economies in Transition" (hereafter EIT or EITs) are countries in the process of shifting from "command" to "more open", liberalized, free market economic systems. In addition to achieving major structural adjustments to their economies, the transformational process requires the introduction of a high degree of…

  10. 24 CFR 200.934 - User fee system for the technical suitability of products program.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... COMMISSIONER, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT GENERAL INTRODUCTION TO FHA PROGRAMS Minimum Property... section establishes fee requirements for the issuance of Structural Engineering Bulletins (SEBs), Mechanical Engineering Bulletins (MEBs), Truss Connector Bulletins (TCBs), Area Letters of Acceptance (ALAs...

  11. PUBLIC SOURCES OF MUTAGENICITY AND CARCINOGENICITY DATA: USE IN STRUCTURE-ACTIVITY RELATIONSHIP MODELS

    EPA Science Inventory

    No Abstract - first paragraph of INTRODUCTION

    Publicly supported compilations of mutagenicity and carcinogenicity data are available
    for a significant number and variety of environmental and industrial chemicals and, to a lesser
    extent, pharmaceutical chemicals. T...

  12. A Tentative Application Of Morphological Filters To Time-Varying Images

    NASA Astrophysics Data System (ADS)

    Billard, D.; Poquillon, B.

    1989-03-01

    In this paper, morphological filters, which are commonly used to process either 2D or multidimensional static images, are generalized to the analysis of time-varying image sequence. The introduction of the time dimension induces then interesting prop-erties when designing such spatio-temporal morphological filters. In particular, the specification of spatio-temporal structuring ele-ments (equivalent to time-varying spatial structuring elements) can be adjusted according to the temporal variations of the image sequences to be processed : this allows to derive specific morphological transforms to perform noise filtering or moving objects discrimination on dynamic images viewed by a non-stationary sensor. First, a brief introduction to the basic principles underlying morphological filters will be given. Then, a straightforward gener-alization of these principles to time-varying images will be pro-posed. This will lead us to define spatio-temporal opening and closing and to introduce some of their possible applications to process dynamic images. At last, preliminary results obtained us-ing a natural forward looking infrared (FUR) image sequence are presented.

  13. Geographic Population Structure of the Sugarcane Borer, Diatraea saccharalis (F.) (Lepidoptera: Crambidae), in the Southern United States

    PubMed Central

    Joyce, Andrea L.; White, William H.; Nuessly, Gregg S.; Solis, M. Alma; Scheffer, Sonja J.; Lewis, Matthew L.; Medina, Raul F.

    2014-01-01

    The sugarcane borer moth, Diatraea saccharalis, is widespread throughout the Western Hemisphere, and is considered an introduced species in the southern United States. Although this moth has a wide distribution and is a pest of many crop plants including sugarcane, corn, sorghum and rice, it is considered one species. The objective was to investigate whether more than one introduction of D. saccharalis had occurred in the southern United States and whether any cryptic species were present. We field collected D. saccharalis in Texas, Louisiana and Florida in the southern United States. Two molecular markers, AFLPs and mitochondrial COI, were used to examine genetic variation among these regional populations and to compare the sequences with those available in GenBank and BOLD. We found geographic population structure in the southern United States which suggests two introductions and the presence of a previously unknown cryptic species. Management of D. saccharalis would likely benefit from further investigation of population genetics throughout the range of this species. PMID:25337705

  14. Site-selective oxidation, amination and epimerization reactions of complex polyols enabled by transfer hydrogenation

    NASA Astrophysics Data System (ADS)

    Hill, Christopher K.; Hartwig, John F.

    2017-12-01

    Polyoxygenated hydrocarbons that bear one or more hydroxyl groups comprise a large set of natural and synthetic compounds, often with potent biological activity. In synthetic chemistry, alcohols are important precursors to carbonyl groups, which then can be converted into a wide range of oxygen- or nitrogen-based functionality. Therefore, the selective conversion of a single hydroxyl group in natural products into a ketone would enable the selective introduction of unnatural functionality. However, the methods known to convert a simple alcohol, or even an alcohol in a molecule that contains multiple protected functional groups, are not suitable for selective reactions of complex polyol structures. We present a new ruthenium catalyst with a unique efficacy for the selective oxidation of a single hydroxyl group among many in unprotected polyol natural products. This oxidation enables the introduction of nitrogen-based functional groups into such structures that lack nitrogen atoms and enables a selective alcohol epimerization by stepwise or reversible oxidation and reduction.

  15. Effect of gallium environment on infrared emission in Er3+-doped gallium– antimony– sulfur glasses

    PubMed Central

    Jiao, Qing; Li, Ge; Li, Lini; Lin, Changgui; Wang, Guoxiang; Liu, Zijun; Dai, Shixun; Xu, Tiefeng; Zhang, Qinyuan

    2017-01-01

    Gallium-based Ga–Sb–S sulfide glasses was elaborated and studied. A relationship between the structure, composition, and optical properties of the glass has been established. The effects of the introduction of Ga on the structure using infrared and Raman spectroscopies and on the Er3+-doped IR emission have been discussed. The results show that incorporation of Ga induced the dissociation of [SbS3] pyramids units and the formation of tetrahedral [GaS4] units. The dissolved rare earth ions are separated around the Ga–S bonding and the infrared emission quenching are controlled. Moreover, continuous introduction of Er ions into the glass forms more Er–S bonds through the further aggregation surrounding the [GaS4] units. In return, the infrared emission intensity decreased with excessive Er ion addition. This phenomenon is correlated with the recurrence concentration quenching effect induced by the increase of [GaS4] units. PMID:28106143

  16. Comparison of historical bottleneck effects and genetic consequences of re-introduction in a critically endangered island passerine.

    PubMed

    Bristol, Rachel M; Tucker, Rachel; Dawson, Deborah A; Horsburgh, Gavin; Prys-Jones, Robert P; Frantz, Alain C; Krupa, Andy; Shah, Nirmal J; Burke, Terry; Groombridge, Jim J

    2013-09-01

    Re-introduction is an important tool for recovering endangered species; however, the magnitude of genetic consequences for re-introduced populations remains largely unknown, in particular the relative impacts of historical population bottlenecks compared to those induced by conservation management. We characterize 14 microsatellite loci developed for the Seychelles paradise flycatcher and use them to quantify temporal and spatial measures of genetic variation across a 134-year time frame encompassing a historical bottleneck that reduced the species to ~28 individuals in the 1960s, through the initial stages of recovery and across a second contemporary conservation-introduction-induced bottleneck. We then evaluate the relative impacts of the two bottlenecks, and finally apply our findings to inform broader re-introduction strategy. We find a temporal trend of significant decrease in standard measures of genetic diversity across the historical bottleneck, but only a nonsignificant downward trend in number of alleles across the contemporary bottleneck. However, accounting for the different timescales of the two bottlenecks (~40 historical generations versus <1 contemporary generation), the loss of genetic diversity per generation is greater across the contemporary bottleneck. Historically, the flycatcher population was genetically structured; however, extinction on four of five islands has resulted in a homogeneous contemporary population. We conclude that severe historical bottlenecks can leave a large footprint in terms of sheer quantity of genetic diversity lost. However, severely depleted genetic diversity does not render a species immune to further genetic erosion upon re-introduction. In some cases, the loss of genetic diversity per generation can, initially at least, be greater across re-introduction-induced bottlenecks. © 2013 John Wiley & Sons Ltd.

  17. Autonomy and structure can enhance motivation of volunteers in sport organizations.

    PubMed

    Hsu, Wei Ting; Wu, Kou Hsien; Wang, Yi Ching; Hsiao, Chia Huei; Wu, Hui Chin

    2013-12-01

    The goal was better understanding of the motivational factors of volunteers in non-profit sport organizations. The roles of two factors provided by supervisors to their subordinates were examined: autonomy support, i.e., the encouragement of self-initiation and emphasis on choice rather than control, and structure, i.e., the introduction of order, definite procedures, and rules. 489 sport volunteers (289 men, 200 women; M age = 31.2 yr., SD = 7.4) were administered questionnaires assessing their perceived autonomy support, structure, and motivation. Regression analysis indicated that perceived autonomy support predicted motivation. Structure also mediated the effect of perceived autonomy support on motivation. Supervisors of sport organizations should provide adequate structure for their volunteers.

  18. Introduction of rubella-containing-vaccine to Madagascar: implications for roll-out and local elimination

    PubMed Central

    Wesolowski, Amy; Mensah, Keitly; Brook, Cara E.; Andrianjafimasy, Miora; Winter, Amy; Buckee, Caroline O.; Razafindratsimandresy, Richter; Tatem, Andrew J.; Heraud, Jean-Michel; Metcalf, C. Jessica E.

    2016-01-01

    Few countries in Africa currently include rubella-containing vaccination (RCV) in their immunization schedule. The Global Alliance for Vaccines Initiative (GAVI) recently opened a funding window that has motivated more widespread roll-out of RCV. As countries plan RCV introductions, an understanding of the existing burden, spatial patterns of vaccine coverage, and the impact of patterns of local extinction and reintroduction for rubella will be critical to developing effective programmes. As one of the first countries proposing RCV introduction in part with GAVI funding, Madagascar provides a powerful and timely case study. We analyse serological data from measles surveillance systems to characterize the epidemiology of rubella in Madagascar. Combining these results with data on measles vaccination delivery, we develop an age-structured model to simulate rubella vaccination scenarios and evaluate the dynamics of rubella and the burden of congenital rubella syndrome (CRS) across Madagascar. We additionally evaluate the drivers of spatial heterogeneity in age of infection to identify focal locations where vaccine surveillance should be strengthened and where challenges to successful vaccination introduction are expected. Our analyses indicate that characteristics of rubella in Madagascar are in line with global observations, with an average age of infection near 7 years, and an impact of frequent local extinction with reintroductions causing localized epidemics. Modelling results indicate that introduction of RCV into the routine programme alone may initially decrease rubella incidence but then result in cumulative increases in the burden of CRS in some regions (and transient increases in this burden in many regions). Deployment of RCV with regular supplementary campaigns will mitigate these outcomes. Results suggest that introduction of RCV offers a potential for elimination of rubella in Madagascar, but also emphasize both that targeted vaccination is likely to be a lynchpin of this success, and the public health vigilance that this introduction will require. PMID:27122178

  19. Rubella vaccination in India: identifying broad consequences of vaccine introduction and key knowledge gaps.

    PubMed

    Winter, A K; Pramanik, S; Lessler, J; Ferrari, M; Grenfell, B T; Metcalf, C J E

    2018-01-01

    Rubella virus infection typically presents as a mild illness in children; however, infection during pregnancy may cause the birth of an infant with congenital rubella syndrome (CRS). As of February 2017, India began introducing rubella-containing vaccine (RCV) into the public-sector childhood vaccination programme. Low-level RCV coverage among children over several years can result in an increase in CRS incidence by increasing the average age of infection without sufficiently reducing rubella incidence. We evaluated the impact of RCV introduction on CRS incidence across India's heterogeneous demographic and epidemiological contexts. We used a deterministic age-structured model that reflects Indian states' rural and urban area-specific demography and vaccination coverage levels to simulate rubella dynamics and estimate CRS incidence with and without RCV introduction to the public sector. Our analysis suggests that current low-level private-sector vaccination has already slightly increased the burden of CRS in India. We additionally found that the effect of public-sector RCV introduction depends on the basic reproductive number, R 0, of rubella. If R 0 is five, a value empirically estimated from an array of settings, CRS incidence post-RCV introduction will likely decrease. However, if R 0 is seven or nine, some states may experience short-term or annual increases in CRS, even if a long-term total reduction in cases (30 years) is expected. Investment in population-based serological surveys and India's fever/rash surveillance system will be key to monitoring the success of the vaccination programme.

  20. Alien Insects in Italy: Comparing Patterns from the Regional to European Level

    PubMed Central

    Inghilesi, Alberto F.; Mazza, Giuseppe; Cervo, Rita; Gherardi, Francesca; Sposimo, Paolo; Tricarico, Elena; Zapparoli, Marzio

    2013-01-01

    The introduction of species outside their native range contributes to the loss of biodiversity, alters the structure and functioning of ecosystems, and damages economy and human health. Insects are one of the taxa with the highest frequency of introduction due to their high diversity, biological properties, and close association with human activities. Here, the allodiversity of Italian entomofauna was analyzed, with a focus on Tuscany (Central Italy). A list of alien insects in Tuscany is included. The status of the alien entomofauna in Italy was updated. The number of alien insects amounts to 122 in Tuscany and 923 in Italy. An introduction rate of 98 species per decade was estimated in Italy. In Tuscany, alien insects belong to 10 orders, mostly Coleoptera (38%), Hemiptera (Sternorrhyncha and Auchenorrhyncha) (23%), and Hymenoptera (13%). They have been most often introduced through vegetable items (ornamental plants or crops). Most species come from the Nearctic region (26%) and are both phytophagous (63%) and amphigonic (80%). Differences and similarities in introduction patterns and in insect abundances across orders among regional, national, and European scales, also considering worldwide abundances, are discussed. Finally, a paucity of information regarding the negative impacts of many species, except for economic pests, phytosanitary threats, and vectors of disease, is underlined. A deeper understanding of the alien insects' ecological impact might help designate policies aimed at preventing further introductions and control the invasive populations of already established species. PMID:24219427

  1. Using machine learning to identify structural breaks in single-group interrupted time series designs.

    PubMed

    Linden, Ariel; Yarnold, Paul R

    2016-12-01

    Single-group interrupted time series analysis (ITSA) is a popular evaluation methodology in which a single unit of observation is being studied, the outcome variable is serially ordered as a time series and the intervention is expected to 'interrupt' the level and/or trend of the time series, subsequent to its introduction. Given that the internal validity of the design rests on the premise that the interruption in the time series is associated with the introduction of the treatment, treatment effects may seem less plausible if a parallel trend already exists in the time series prior to the actual intervention. Thus, sensitivity analyses should focus on detecting structural breaks in the time series before the intervention. In this paper, we introduce a machine-learning algorithm called optimal discriminant analysis (ODA) as an approach to determine if structural breaks can be identified in years prior to the initiation of the intervention, using data from California's 1988 voter-initiated Proposition 99 to reduce smoking rates. The ODA analysis indicates that numerous structural breaks occurred prior to the actual initiation of Proposition 99 in 1989, including perfect structural breaks in 1983 and 1985, thereby casting doubt on the validity of treatment effects estimated for the actual intervention when using a single-group ITSA design. Given the widespread use of ITSA for evaluating observational data and the increasing use of machine-learning techniques in traditional research, we recommend that structural break sensitivity analysis is routinely incorporated in all research using the single-group ITSA design. © 2016 John Wiley & Sons, Ltd.

  2. Non-melanoma Skin Cancer in Canada Chapter 1: Introduction to the Guidelines.

    PubMed

    Guenther, Lyn C; Barber, Kirk; Searles, Gordon E; Lynde, Charles W; Janiszewski, Peter; Ashkenas, John

    2015-01-01

    Non-melanoma skin cancer (NMSC), including basal and squamous cell carcinoma, represents the most common malignancy. The aim of this document is to provide guidance to Canadian health care practitioners on NMSC management. After conducting a literature review, the group developed recommendations for prevention, management, and treatment of basal cell carcinomas, squamous cell carcinomas, and actinic keratoses. These tumour types are considered separately in the accompanying articles. The Grading of Recommendations Assessment, Development and Evaluation system was used to assign strength to each recommendation. This introduction describes the scope and structure of the guidelines and the methods used to develop them. The epidemiology of NMSC is reviewed, as are the pathophysiologic changes occurring with damage to the skin, which lead to the formation of actinic keratoses and invasive squamous or basal cell carcinomas. This introduction describes the need for primary prevention and offers an overview of treatment options that are discussed in later chapters of the guidelines. © The Author(s) 2015.

  3. Introduction to quantized LIE groups and algebras

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Tjin, T.

    1992-10-10

    In this paper, the authors give a self-contained introduction to the theory of quantum groups according to Drinfeld, highlighting the formal aspects as well as the applications to the Yang-Baxter equation and representation theory. Introductions to Hopf algebras, Poisson structures and deformation quantization are also provided. After defining Poisson Lie groups the authors study their relation to Lie bialgebras and the classical Yang-Baxter equation. Then the authors explain in detail the concept of quantization for them. As an example the quantization of sl[sub 2] is explicitly carried out. Next, the authors show how quantum groups are related to the Yang-Baxtermore » equation and how they can be used to solve it. Using the quantum double construction, the authors explicitly construct the universal R matrix for the quantum sl[sub 2] algebra. In the last section, the authors deduce all finite-dimensional irreducible representations for q a root of unity. The authors also give their tensor product decomposition (fusion rules), which is relevant to conformal field theory.« less

  4. Application of modern tensor calculus to engineered domain structures. 1. Calculation of tensorial covariants.

    PubMed

    Kopský, Vojtech

    2006-03-01

    This article is a roadmap to a systematic calculation and tabulation of tensorial covariants for the point groups of material physics. The following are the essential steps in the described approach to tensor calculus. (i) An exact specification of the considered point groups by their embellished Hermann-Mauguin and Schoenflies symbols. (ii) Introduction of oriented Laue classes of magnetic point groups. (iii) An exact specification of matrix ireps (irreducible representations). (iv) Introduction of so-called typical (standard) bases and variables -- typical invariants, relative invariants or components of the typical covariants. (v) Introduction of Clebsch-Gordan products of the typical variables. (vi) Calculation of tensorial covariants of ascending ranks with consecutive use of tables of Clebsch-Gordan products. (vii) Opechowski's magic relations between tensorial decompositions. These steps are illustrated for groups of the tetragonal oriented Laue class D(4z) -- 4(z)2(x)2(xy) of magnetic point groups and for tensors up to fourth rank.

  5. Cysteine-specific, covalent anchoring of transition organometallic complexes to the protein papain from Carica papaya.

    PubMed

    Haquette, Pierre; Salmain, Michèle; Svedlung, Karolina; Martel, Annie; Rudolf, Bogna; Zakrzewski, Janusz; Cordier, Stéphane; Roisnel, Thierry; Fosse, Céline; Jaouen, Gérard

    2007-01-22

    Site-directed and covalent introduction of various transition metal-organic entities to the active site of the cysteine endoproteinase, papain, was achieved by treatment of this enzyme with a series of organometallic maleimide derivatives specially designed for the purpose. Kinetic studies made it clear that time-dependent irreversible inactivation of papain occurred in the presence of these organometallic maleimides as a result of Michael addition of the sulfhydryl of Cys25. The rate and mechanism of inactivation were highly dependent on the structure of the organometallic entity attached to the maleimide group. Combined ESI-MS and IR analysis indicated that all the resulting papain adducts contained one organometallic moiety per protein molecule. This confirmed that chemospecific introduction of the metal complexes was indeed achieved. Thus, three novel reagents for heavy-atom derivatization of protein crystals, which include ruthenium, rhenium and tungsten, are now available for the introduction of electron-dense scatterers for phasing of X-ray crystallographic data.

  6. A PIV Study of Slotted Air Injection for Jet Noise Reduction

    NASA Technical Reports Server (NTRS)

    Henderson, Brenda S.; Wernet, Mark P.

    2012-01-01

    Results from acoustic and Particle Image Velocimetry (PIV) measurements are presented for single and dual-stream jets with fluidic injection on the core stream. The fluidic injection nozzles delivered air to the jet through slots on the interior of the nozzle at the nozzle trailing edge. The investigations include subsonic and supersonic jet conditions. Reductions in broadband shock noise and low frequency mixing noise were obtained with the introduction of fluidic injection on single stream jets. Fluidic injection was found to eliminate shock cells, increase jet mixing, and reduce turbulent kinetic energy levels near the end of the potential core. For dual-stream subsonic jets, the introduction of fluidic injection reduced low frequency noise in the peak jet noise direction and enhanced jet mixing. For dual-stream jets with supersonic fan streams and subsonic core streams, the introduction of fluidic injection in the core stream impacted the jet shock cell structure but had little effect on mixing between the core and fan streams.

  7. What Is Technological Pedagogical Content Knowledge (TPACK)?

    ERIC Educational Resources Information Center

    Koehler, Mathew J.; Mishra, Punya; Cain, William

    2013-01-01

    This paper describes TPACK, technological pedagogical content knowledge (originally TPCK), a teacher knowledge framework for technology integration that builds on Lee S. Shulman's construct of pedagogical content knowledge to include technology knowledge. The paper begins with a brief introduction to the complex, ill-structured nature of teaching.…

  8. Coordinated Home Care Training Manual.

    ERIC Educational Resources Information Center

    Michigan Univ., Ann Arbor. Home Care Training Center.

    This manual is intended as a source of information and assistance in the planning, organization, implementation, and evaluation of home care programs. There are ten major sections: (1) Introduction (review of the history of home care and definition of pertinent terms), (2) Program Planning, (3) Organizational Structure, (4) Coordination and…

  9. Smoot Cosmology Group

    Science.gov Websites

    History of COBE project Structure in the COBE differential microwave radiometer first-year maps. Smoot, et (Wilkinson Microwave Anisotropy Probe) CMB satellite 5 year data papers Introduction NASA's COBE (Cosmic compare the spectrum of the cosmic microwave background radiation with that from a precise blackbody. Data

  10. Masonry Specialist.

    ERIC Educational Resources Information Center

    Air Force Training Command, Sheppard AFB, TX.

    This instructional package is intended for use in training Air Force personnel enrolled in a program for apprentice masons. Training includes an introduction to masonry and provides instruction in the use of masons' hand, portable power, and shop tools; construction and maintenance of masonry structures using brick, concrete block, and tile;…

  11. Scholarly Use of Information: Graduate Students' Information Seeking Behaviour

    ERIC Educational Resources Information Center

    George, Carole; Bright, Alice; Hurlbert, Terry; Linke, Erika C.; St. Clair, Gloriana; Stein, Joan

    2006-01-01

    Introduction: This study explored graduate students' information behaviour related to their process of inquiry and scholarly activities. Method: In depth, semi-structured interviews were conducted with one hundred graduate students representing all disciplines and departments from Carnegie Mellon University. Analysis: Working in pairs, we coded…

  12. Potentialities of Participatory Pedagogy in the Women's Studies Classroom

    ERIC Educational Resources Information Center

    Guillard, Julianne

    2012-01-01

    In this article Julianne Guillard describes her loosely structured approach to student participation in her Introduction to Gender, Sexuality, and Women's Studies course. She describes this approach toward participation (which helps create a welcoming, "safe space" environment) along with feedback, both positive and negative, from…

  13. Gender Inequality at Work.

    ERIC Educational Resources Information Center

    Jacobs, Jerry A., Ed.

    These 14 papers address many dimensions of gender inequality at work. The empirical studies include examinations of original surveys, secondary analyses of large data sets, and historical reports assaying the significance of personal, family, and structural factors with regard to gender in the workplace. An introduction (Jacobs) sketches how sex…

  14. A Software Laboratory Environment for Computer-Based Problem Solving.

    ERIC Educational Resources Information Center

    Kurtz, Barry L.; O'Neal, Micheal B.

    This paper describes a National Science Foundation-sponsored project at Louisiana Technological University to develop computer-based laboratories for "hands-on" introductions to major topics of computer science. The underlying strategy is to develop structured laboratory environments that present abstract concepts through the use of…

  15. The Logistics Planning Process of the Far East Air Material Command during the Korean War

    DTIC Science & Technology

    1988-09-01

    Figures . . ........... ........ vii Abstract ........... ........................ viii I. Introduction to the Research ............. 1 Overview ...31 Particular Method . . . ........... 32 II. The National Defense Planning Structure. . . ... 34 Overview ...Air Materiel Command’s Logistics Plans and Policy Making Response to Korean Tasking . . . . ........ 83 Overview

  16. How the Gifted Brain Learns.

    ERIC Educational Resources Information Center

    Sousa, David A.

    This book is designed to help teachers turn research on the brain function of intellectually and artistically advanced students into practical classroom activities and strategies. Following an introduction that discuses the myths and realities about giftedness, chapter 1 discusses basic brain structures and their functions. Chapter 2 looks at…

  17. Teachers as Public Speakers: Training Teachers to Lecture.

    ERIC Educational Resources Information Center

    Cooper, Pamela J.

    Focusing on public speaking as a major instructional tool for teachers, this paper contains suggestions for more effective lecturing. In the introduction, classroom communication is analyzed according to four moves: structuring, soliciting, responding, and reacting. The paper then discusses four problems in studying learning from meaningful verbal…

  18. Marketing.

    ERIC Educational Resources Information Center

    Foskett, Nick

    This document is a chapter in "The Principles and Practice of Educational Management," which aims to provide a systematic and analytical introduction to the study of educational management. The structure of the book reflects the main substantive areas of educational leadership and management, and most of the major themes are covered in the…

  19. Understanding Quality.

    ERIC Educational Resources Information Center

    West-Burnham, John

    This document is a chapter in "The Principles and Practice of Educational Management," which aims to provide a systematic and analytical introduction to the study of educational management. The structure of the book reflects the main substantive areas of educational leadership and management, and most of the major themes are covered in…

  20. TD4020: College and University Organization and Administration.

    ERIC Educational Resources Information Center

    Hankin, Joseph

    This document is a course syllabus for "College and University Organization and Administration." The purpose of the course is to provide an overview of the organizational structure and administrative nature of U.S. colleges, universities, and other learning organizations. Course objectives include: (1) an introduction of selected…

  1. Structures to Resist the Effects of Accidental Explosions. Volume 1. Introduction

    DTIC Science & Technology

    1987-12-01

    Biology and Problem Areas in Relating Physical and Biological Parameters, Lovelace Foundation for Medical Education and Research, Albuquerque, New Mexico...ARAED-TR-87033, U.S. Army Armament Research, Development and Engineering Center, Dover, N.J., October, 1987. 42 DISTRIDUTON LIST Commander Annment Researh

  2. The Essence of Montessori in the Elementary Years. Spotlight: Cosmic Education.

    ERIC Educational Resources Information Center

    Loeffler, Margaret H.

    2002-01-01

    Discusses the introduction of Cosmic Education to Montessori elementary school children, focusing on the way the curriculum is structured around five "great stories": Creation, The Coming of Life, The Coming of Humans, and the stories of the development of Language and Mathematics. (JPB)

  3. Global population genetic structure of the starlet anemone Nematostella vectensis: multiple introductions and implications for conservation policy

    EPA Science Inventory

    Distinguishing natural versus anthropogenic dispersal of organisms is essential for determining the native range of a species and implementing an effective conservation strategy. For cryptogenic species with limited historical records, molecular data can help to identify introduc...

  4. Virtual Bridge Design Challenge

    ERIC Educational Resources Information Center

    Mitts, Charles R.

    2013-01-01

    This design/problem-solving activity challenges students to design a replacement bridge for one that has been designated as either structurally deficient or functionally obsolete. The Aycock MS Technology/STEM Magnet Program Virtual Bridge Design Challenge is an authentic introduction to the engineering design process. It is a socially relevant…

  5. The Physics and Chemistry of Materials

    NASA Astrophysics Data System (ADS)

    Gersten, Joel I.; Smith, Frederick W.

    2001-06-01

    A comprehensive introduction to the structure, properties, and applications of materials This title provides the first unified treatment for the broad subject of materials. Authors Gersten and Smith use a fundamental approach to define the structure and properties of a wide range of solids on the basis of the local chemical bonding and atomic order present in the material. Emphasizing the physical and chemical origins of material properties, the book focuses on the most technologically important materials being utilized and developed by scientists and engineers. Appropriate for use in advanced materials courses, The Physics and Chemistry of Materials provides the background information necessary to assimilate the current academic and patent literature on materials and their applications. Problem sets, illustrations, and helpful tables complete this well-rounded new treatment. Five sections cover these important topics: * Structure of materials, including crystal structure, bonding in solids, diffraction and the reciprocal lattice, and order and disorder in solids * Physical properties of materials, including electrical, thermal, optical, magnetic, and mechanical properties * Classes of materials, including semiconductors, superconductors, magnetic materials, and optical materials in addition to metals, ceramics, polymers, dielectrics, and ferroelectrics * A section on surfaces, thin films, interfaces, and multilayers discusses the effects of spatial discontinuities in the physical and chemical structure of materials * A section on synthesis and processing examines the effects of synthesis on the structure and properties of various materials This book is enhanced by a Web-based supplement that offers advanced material together with an entire electronic chapter on the characterization of materials. The Physics and Chemistry of Materials is a complete introduction to the structure and properties of materials for students and an excellent reference for scientists and engineers.

  6. Permeability and flammability study of composite sandwich structures for cryogenic applications

    NASA Astrophysics Data System (ADS)

    Bubacz, Monika

    Fiber reinforced plastics offer advantageous specific strength and stiffness compared to metals and has been identified as candidates for the reusable space transportation systems primary structures including cryogenic tanks. A number of carbon and aramid fiber reinforced plastics have been considered for the liquid hydrogen tanks. Materials selection is based upon mechanical properties and containment performance (long and short term) and upon manufacturing considerations. The liquid hydrogen tank carries shear, torque, end load, and bending moment due to gusts, maneuver, take-off, landing, lift, drag, and fuel sloshing. The tank is pressurized to about 1.5 atmosphere (14.6psi or 0.1 MPa) differential pressure and on ascent maintains the liquid hydrogen at a temperature of 20K. The objective of the research effort into lay the foundation for developing the technology required for reliable prediction of the effects of various design, manufacturing, and service parameters on the susceptibility of composite tanks to develop excessive permeability to cryogenic fuels. Efforts will be expended on developing the materials and structural concepts for the cryogenic tanks that can meet the functional requirements. This will include consideration for double wall composite sandwich structures, with inner wall to meet the cryogenic requirements. The structure will incorporate nanoparticles for properties modifications and developing barriers. The main effort will be extended to tank wall's internal skin design. The main requirements for internal composite stack are: (1) introduction of barrier film (e.g. honeycomb material paper sheet) to reduce the wall permeability to hydrogen, (2) introduction of nanoparticles into laminate resin to prevent micro-cracking or crack propagation. There is a need to characterize and analyze composite sandwich structural damage due to burning and explosion. Better understanding of the flammability and blast resistance of the composite structures needs to be evaluated.

  7. Six characteristics of effective structured reporting and the inevitable integration with speech recognition.

    PubMed

    Liu, David; Zucherman, Mark; Tulloss, William B

    2006-03-01

    The reporting of radiological images is undergoing dramatic changes due to the introduction of two new technologies: structured reporting and speech recognition. Each technology has its own unique advantages. The highly organized content of structured reporting facilitates data mining and billing, whereas speech recognition offers a natural succession from the traditional dictation-transcription process. This article clarifies the distinction between the process and outcome of structured reporting, describes fundamental requirements for any effective structured reporting system, and describes the potential development of a novel, easy-to-use, customizable structured reporting system that incorporates speech recognition. This system should have all the advantages derived from structured reporting, accommodate a wide variety of user needs, and incorporate speech recognition as a natural component and extension of the overall reporting process.

  8. Aircraft Structural Design Handbook for Lower Cost Maintenance and Repair

    DTIC Science & Technology

    1977-03-01

    Structure Repair and Maintenance program under Air Force contract F33615-74-C-3101, Project No. 1368, Task No. 136802. The work was performed by...Interchangeability 6.4.5.3 Work Area Consideration 6.5 Life Cycle Cost Impact Considerati ons 6.5.1 Introduction 6.5.2 Objective 6.5.3 Life Cycle Cost...engine sonic vibration, ^auses working of the vane assemblies and their inboard and outboard attach members resulting in fatigue cracks. The constant

  9. InAs1-xSbx Alloys with Native Llattice Parameters Grown on Compositionally Graded Buffers: Structural and Optical Properties

    DTIC Science & Technology

    2013-08-15

    InAsSb, compositionally graded buffer, MBE, infrared, minority carrier lifetime, reciprocal space mapping Ding Wang, Dmitry Donetsky, Youxi Lin, Gela...infrared, minority carrier lifetime; reciprocal space mapping . Introduction GaSb based Ill-Y materials are widely used in the development of mid... space mapping (RSM) at the symmetric (004) and asymmetric (335) Bragg reflections. Figure 3 presents a set of RSM measurements for a structure

  10. Building Habitats on the Moon: Engineering Approaches to Lunar Settlements

    NASA Astrophysics Data System (ADS)

    Benaroya, H.

    This book provides an overview of various concepts for lunar habitats and structural designs and characterizes the lunar environment - the technical and the nontechnical. The designs take into consideration psychological comfort, structural strength against seismic and thermal activity, as well as internal pressurization and 1/6 g. Also discussed are micrometeoroid modelling, risk and redundancy as well as probability and reliability, with an introduction to analytical tools that can be useful in modelling uncertainties.

  11. Instabilities of Damage and Surface Degradation Mechanisms in Brittle Material Structural Systems

    DTIC Science & Technology

    1992-03-15

    I INTRODUCTION AND SCOPE 1.1 General Brittle materials such as rock and concrete contain a multitude of defects in the form of micro-voids and/or...micro-cracks even before any external load is applied. The term "structure" is associated with such defects . During a loading- unloading process, these...voids/cracks may undergo irreversible growth and new ones may nucleate. The ultimate coalescence of such defects may result in macro- crack initiation

  12. Heavyweight cement concrete with high stability of strength parameters

    NASA Astrophysics Data System (ADS)

    Kudyakov, Konstantin; Nevsky, Andrey; Danke, Ilia; Kudyakov, Aleksandr; Kudyakov, Vitaly

    2016-01-01

    The present paper establishes regularities of basalt fibers distribution in movable cement concrete mixes under different conditions of their preparation and their selective introduction into mixer during the mixing process. The optimum content of basalt fibers was defined as 0.5% of the cement weight, which provides a uniform distribution of fibers in the concrete volume. It allows increasing compressive strength up to 51.2% and increasing tensile strength up to 28.8%. Micro-structural analysis identified new formations on the surface of basalt fibers, which indicates the good adhesion of hardened cement paste to the fibers. Stability of concrete strength parameters has significantly increased with introduction of basalt fibers into concrete mix.

  13. Introducing New Peer Worker Roles into Mental Health Services in England: Comparative Case Study Research Across a Range of Organisational Contexts.

    PubMed

    Gillard, Steve; Holley, Jess; Gibson, Sarah; Larsen, John; Lucock, Mike; Oborn, Eivor; Rinaldi, Miles; Stamou, Elina

    2015-11-01

    A wide variety of peer worker roles is being introduced into mental health services internationally. Empirical insight into whether conditions supporting role introduction are common across organisational contexts is lacking. A qualitative, comparative case study compared the introduction of peer workers employed in the statutory sector, voluntary sector and in organisational partnerships. We found good practice across contexts in structural issues including recruitment and training, but differences in expectations of the peer worker role in different organisational cultures. Issues of professionalism and practice boundaries were important everywhere but could be understood very differently, sometimes eroding the distinctiveness of the role.

  14. The importance of scaling for detecting community patterns: success and failure in assemblages of introduced species

    USGS Publications Warehouse

    Allen, Craig R.; Angeler, David G.; Moulton, Michael P.; Holling, Crawford S.

    2015-01-01

    Community saturation can help to explain why biological invasions fail. However, previous research has documented inconsistent relationships between failed invasions (i.e., an invasive species colonizes but goes extinct) and the number of species present in the invaded community. We use data from bird communities of the Hawaiian island of Oahu, which supports a community of 38 successfully established introduced birds and where 37 species were introduced but went extinct (failed invasions). We develop a modified approach to evaluate the effects of community saturation on invasion failure. Our method accounts (1) for the number of species present (NSP) when the species goes extinct rather than during its introduction; and (2) scaling patterns in bird body mass distributions that accounts for the hierarchical organization of ecosystems and the fact that interaction strength amongst species varies with scale. We found that when using NSP at the time of extinction, NSP was higher for failed introductions as compared to successful introductions, supporting the idea that increasing species richness and putative community saturation mediate invasion resistance. Accounting for scale-specific patterns in body size distributions further improved the relationship between NSP and introduction failure. Results show that a better understanding of invasion outcomes can be obtained when scale-specific community structure is accounted for in the analysis.

  15. Introduction of software tools for epidemiological surveillance in infection control in Colombia

    PubMed Central

    Motoa, Gabriel; Vallejo, Marta; Blanco, Víctor M; Correa, Adriana; de la Cadena, Elsa; Villegas, María Virginia

    2015-01-01

    Introduction: Healthcare-Associated Infections (HAI) are a challenge for patient safety in the hospitals. Infection control committees (ICC) should follow CDC definitions when monitoring HAI. The handmade method of epidemiological surveillance (ES) may affect the sensitivity and specificity of the monitoring system, while electronic surveillance can improve the performance, quality and traceability of recorded information. Objective: To assess the implementation of a strategy for electronic surveillance of HAI, Bacterial Resistance and Antimicrobial Consumption by the ICC of 23 high-complexity clinics and hospitals in Colombia, during the period 2012-2013. Methods: An observational study evaluating the introduction of electronic tools in the ICC was performed; we evaluated the structure and operation of the ICC, the degree of incorporation of the software HAI Solutions and the adherence to record the required information. Results: Thirty-eight percent of hospitals (8/23) had active surveillance strategies with standard criteria of the CDC, and 87% of institutions adhered to the module of identification of cases using the HAI Solutions software. In contrast, compliance with the diligence of the risk factors for device-associated HAIs was 33%. Conclusions: The introduction of ES could achieve greater adherence to a model of active surveillance, standardized and prospective, helping to improve the validity and quality of the recorded information. PMID:26309340

  16. Philosophy and Sociology of Science Evolution and History

    NASA Astrophysics Data System (ADS)

    Rosen, Joe

    The following sections are included: * Concrete Versus Abstract Theoretical Models * Introduction: concrete and abstract in kepler's contribution * Einstein's theory of gravitation and mach's principle * Unitary symmetry and the structure of hadrons * Conclusion * Dedication * Symmetry, Entropy and Complexity * Introduction * Symmetry Implies Abstraction and Loss of Information * Broken Symmetries - Imposed or Spontaneous * Symmetry, Order and Information * References * Cosmological Surrealism: More Than "Eternal Reality" Is Needed * Pythagoreanism in atomic, nuclear and particle physics * Introduction: Pythagoreanism as part of the Greek scientific world view — and the three questions I will tackle * Point 1: the impact of Gersonides and Crescas, two scientific anti-Aristotelian rebels * Point 2: Kepler's spheres to Bohr's orbits — Pythagoreanisms at last! * Point 3: Aristotle to Maupertuis, Emmy Noether, Schwinger * References * Paradigm Completion For Generalized Evolutionary Theory With Application To Epistemology * Evolution Fully Generalized * Entropy: Gravity as Model * Evolution and Entropy: Measures of Complexity * Extinctions and a Balanced Evolutionary Paradigm * The Evolution of Human Society - the Age of Information as example * High-Energy Physics and the World Wide Web * Twentieth Century Epistemology has Strong (de facto) Evolutionary Elements * The discoveries towards the beginning of the XXth Century * Summary and Conclusions * References * Evolutionary Epistemology and Invalidation * Introduction * Extinctions and A New Evolutionary Paradigm * Evolutionary Epistemology - Active Mutations * Evolutionary Epistemology: Invalidation as An Extinction * References

  17. Overcoming perceptions of financial barriers to rotavirus vaccine introduction in Asia

    PubMed Central

    Nelson, E Anthony S; de Quadros, Ciro A; Santosham, Mathuram; Parashar, Umesh D; Steele, A Duncan

    2013-01-01

    Despite a WHO recommendation in 2009, reaffirmed in 2013, that all countries should consider introducing rotavirus vaccines into their National Immunization Programs, as of June 2013 only 45 have done so. One major consideration appears to have been the costs of the vaccine to countries. Of concern, is that Asian countries have been slow to introduce rotavirus vaccines despite having robust data that could inform the decision-making process. Although decisions on new vaccine introduction are very complex and vary by country and region, economic evaluations are often pivotal once vaccine efficacy and safety has been established, and disease burden documented and communicated. Unfortunately, with private sector list prices of vaccines often used in economic evaluations, rather than a potential public health sector pricing structure, policy-makers may defer decisions on rotavirus vaccine introduction based on the belief that “the vaccine price is too high,” even though this might be based on erroneous data. The Pan American Health Organization’s Revolving Fund provides one example of how vaccine price can be made more competitive and transparent through a regional tendering process. Other mechanisms, such as tiered pricing and UNICEF procurement, also exist that could help Asian and other countries move forward more quickly with rotavirus vaccine introduction. PMID:23955246

  18. Factors Associated with the Early Introduction of Complementary Feeding in Saudi Arabia.

    PubMed

    Alzaheb, Riyadh A

    2016-07-12

    Mothers' instigation of complementary feeding before their infant reaches 6 months old risks shortening their breastfeeding duration, and high morbidity and mortality for their child. Complementary feeding practices require further investigation in Saudi Arabia. The present study aims to evaluate complementary feeding practices, and to establish which factors are associated with the early introduction of complementary feeding in the Saudi Arabian context. Cross-sectional research was conducted with 632 mothers of infants aged between 4 and 24 months attending five primary health care centers (PHCCs) between July and December 2015 in Saudi Arabia. Data on participants' socio-demographic characteristics and complementary feeding practices were collected via structured questionnaires. A regression analysis identified the factors associated with the early introduction of solid foods, defined as before 17 weeks. 62.5% of the study's infants received solid foods before reaching 17 weeks old. The maternal factors at higher risk of early introduction of solids were: younger age; Saudi nationality; shorter education; employment within 6 months post-birth; caesareans; not breastfeeding fully for six weeks post-birth, and living in low-income households. Complementary feeding prior to 6 months postpartum was common in Saudi Arabia. Public health interventions are needed to reduce early complementary feeding, focusing on mothers at highest risk of giving solids too early.

  19. Overcoming perceptions of financial barriers to rotavirus vaccine introduction in Asia.

    PubMed

    Nelson, E Anthony S; de Quadros, Ciro A; Santosham, Mathuram; Parashar, Umesh D; Steele, Duncan

    2013-11-01

    Despite a WHO recommendation in 2009, reaffirmed in 2013, that all countries should consider introducing rotavirus vaccines into their National Immunization Programs, as of June 2013 only 45 have done so. One major consideration appears to have been the costs of the vaccine to countries. Of concern, is that Asian countries have been slow to introduce rotavirus vaccines despite having robust data that could inform the decision-making process. Although decisions on new vaccine introduction are very complex and vary by country and region, economic evaluations are often pivotal once vaccine efficacy and safety has been established, and disease burden documented and communicated. Unfortunately, with private sector list prices of vaccines often used in economic evaluations, rather than a potential public health sector pricing structure, policy-makers may defer decisions on rotavirus vaccine introduction based on the belief that "the vaccine price is too high," even though this might be based on erroneous data. The Pan American Health Organization's Revolving Fund provides one example of how vaccine price can be made more competitive and transparent through a regional tendering process. Other mechanisms, such as tiered pricing and UNICEF procurement, also exist that could help Asian and other countries move forward more quickly with rotavirus vaccine introduction.

  20. Fuzzy Structures Analysis of Aircraft Panels in NASTRAN

    NASA Technical Reports Server (NTRS)

    Sparrow, Victor W.; Buehrle, Ralph D.

    2001-01-01

    This paper concerns an application of the fuzzy structures analysis (FSA) procedures of Soize to prototypical aerospace panels in MSC/NASTRAN, a large commercial finite element program. A brief introduction to the FSA procedures is first provided. The implementation of the FSA methods is then disclosed, and the method is validated by comparison to published results for the forced vibrations of a fuzzy beam. The results of the new implementation show excellent agreement to the benchmark results. The ongoing effort at NASA Langley and Penn State to apply these fuzzy structures analysis procedures to real aircraft panels is then described.

  1. Potassium-argon (argon-argon), structural fabrics

    USGS Publications Warehouse

    Cosca, Michael A.; Rink, W. Jack; Thompson, Jereon

    2014-01-01

    Definition: 40Ar/39Ar geochronology of structural fabrics: The application of 40Ar/39Ar methods to date development of structural fabrics in geologic samples. Introduction: Structural fabrics develop during rock deformation at variable pressures (P), temperatures (T), fluid compositions (X), and time (t). Structural fabrics are represented in rocks by features such as foliations and shear zones developed at the mm to km scale. In ideal cases, the P-T-X history of a given structural fabric can be constrained using stable isotope, cation exchange, and/or mineral equilibria thermobarometry (Essene 1989). The timing of structural fabric development can be assessed qualitatively using geologic field observations or quantitatively using isotope-based geochronology. High-precision geochronology of the thermal and fluid flow histories associated with structural fabric development can answer fundamental geologic questions including (1) when hydrothermal fluids transported and deposited ore minerals, ...

  2. New Partnerships for Improvement.

    ERIC Educational Resources Information Center

    Bell, Les

    This document is a chapter in "The Principles and Practice of Educational Management," which aims to provide a systematic and analytical introduction to the study of educational management. The structure of the book reflects the main substantive areas of educational leadership and management, and most of the major themes are covered in the…

  3. Graduate Students' Interest in Immunology as a Discipline

    ERIC Educational Resources Information Center

    Kwarteng, Alexander; Frimpong, Michael; Sylverken, Augustina Angelina; Arthur, Yarhands D.; Ahuno, Samuel T.; Owusu-Dabo, Ellis

    2017-01-01

    Interest and motivation significantly influence achievement; however, interest in immunology remains to be determined. Using a structured questionnaire, the current study assessed for the first time interest in immunology among biomedical graduate students in Ghana after a one-week introduction to immunology course. Our results revealed that…

  4. The Impact of Hypermedia Instructional Materials on Study Self-Regulation in College Students.

    ERIC Educational Resources Information Center

    Nelms, Keith R.

    The metacognition "calibration of comprehension" research paradigm is used to investigate the question of whether the introduction of hypertext and hypermedia into college instruction impacts students' ability to regulate their own learning processes. Presentation technology (paper or computer) and content structure (linear or nonlinear) were…

  5. Historic Structure Assessment for Building 839, Carlisle Barracks: Carlisle, Pennsylvania

    DTIC Science & Technology

    2017-10-01

    Ratings 3 Conditions Assessment Survey Introduction Site Visit Summary of Findings Building Feature Master List Condition Assessment Reports...that guide the project; 4. Condition Assessment Survey : architectural fabric survey and assessment, summary of condition ratings, and maintenance...Barracks September 2017 End of Chapter 2 Condition Assessment Survey

  6. Theory of Holors

    NASA Astrophysics Data System (ADS)

    Hiram Moon, Parry; Eberle Spencer, Domina

    2005-09-01

    Preface; Nomenclature; Historical introduction; Part I. Holors: 1. Index notation; 2. Holor algebra; 3. Gamma products; Part II. Transformations: 4. Tensors; 5. Akinetors; 6. Geometric spaces; Part III. Holor Calculus: 7. The linear connection; 8. The Riemann-Christoffel tensors; Part IV. Space Structure: 9. Non-Riemannian spaces; 10. Riemannian space; 11. Euclidean space; References; Index.

  7. Protein Condensation

    NASA Astrophysics Data System (ADS)

    Gunton, James D.; Shiryayev, Andrey; Pagan, Daniel L.

    2007-09-01

    Preface; 1. Introduction; 2. Globular protein structure; 3. Experimental methods; 4. Thermodynamics and statistical mechanics; 5. Protein-protein interactions; 6. Theoretical studies of equilibrium; 7. Nucleation theory; 8. Experimental studies of nucleation; 9. Lysozyme; 10. Some other globular proteins; 11. Membrane proteins; 12. Crystallins and cataracts; 13. Sickle hemoglobin and sickle cell anemia; 14, Alzheimer's disease; Index.

  8. Antimicrobial and cold plasma treatments for inactivation of listeria monocytogenes on whole apple surface

    USDA-ARS?s Scientific Manuscript database

    Introduction: Produce and bacterial cell surface structure play an important role as to where and how bacteria attach to produce surfaces. The efficacy of a novel antimicrobial solution developed in our laboratory was investigated in combination with cold plasma treatments for inactivation of Liste...

  9. Structures of Technological Education and Contributing Social Factors.

    ERIC Educational Resources Information Center

    Fishwick, Wilfred, Ed.

    This book presents five case studies on the development of post-secondary engineering education in Canada, Japan, Venezuela, Pakistan, and Scotland. An introduction to the case studies take a long, historical and sociological look at the development of technical education and in particular reviews the industrial revolution and education, and the…

  10. The Cool and Belkin Faceted Classification of Information Interactions Revisited

    ERIC Educational Resources Information Center

    Huvila, Isto

    2010-01-01

    Introduction: The complexity of human information activity is a challenge for both practice and research in information sciences and information management. Literature presents a wealth of approaches to analytically structure and make sense of human information activity including a faceted classification model of information interactions published…

  11. The Expansion of Dreissena and Long-term Shifts in Benthic Macroinvertebrate Community Structure in Lake Ontario, 1998-2008

    EPA Science Inventory

    The introduction of Dreissena to the Great lakes has profoundly impacted benthic ecosystems, resulting in the decline of native species and dramatic community restructuring. In Lake Ontario, long-term monitoring has yielded a wealth of detailed information regarding both the exp...

  12. III. Insects

    Treesearch

    Jose F. Negron

    2011-01-01

    RMRS research on insect pests focuses mostly on conifer pests. There is a long history of invasive insects causing significant impacts, mortality, and changes in forest ecosystem structure in North America. Perhaps the most evident example is the introduction of the gypsy moth, Lymantria dispar, into eastern North America in the 1860s (Forbush and Frenald 1896)....

  13. Tanzanian Swahili: Special Skills Handbook. Peace Corps Language Handbook Series.

    ERIC Educational Resources Information Center

    Hawkinson, Annie K.

    This handbook contains two types of materials: (1) texts in Swahili with English translations, and (2) vocabulary lists. The introduction of the book provides numerous suggestions for using the texts and lists to expand vocabulary, improve ability in using grammatical structures, developing writing and speaking ability, and improving listening…

  14. Swahili. An Active Introduction. General Conversation.

    ERIC Educational Resources Information Center

    Indakwa, John; And Others

    This textbook is aimed towards the beginning student of Swahili and is designed to cover almost all the main features of Swahili structure. The course is divided into 87 "cycles," each of which begins with an "M" phase (mimicry, meaning, manipulation, memorization), and ends with a "C" phase (conversation and…

  15. Introduction: Forest restoration in temperate and boreal zones

    Treesearch

    Emile Gardiner; Katrine Hahn; Magnus Löf

    2003-01-01

    The past decade has witnessed an acceleration of forest restoration activities around the globe. Afforestation of former agricultural land, rehabilitation of natural forest processes and structures at the stand and landscape levels, and conversion of single-species plantations to mixed-species stands are among the prominent types of restoration practices currently...

  16. The Stability and Structure of Lean Hydrogen-Air Flames: Effects of Gravity

    DTIC Science & Technology

    1990-05-17

    INTRODUCTION ................................................................................................. 1 MULTIDIMENSIONAL FLAME MODEL ...combustion, molecular diffusion between the reactants, intermediates, and products, thermal conduction, convection, and gravity. Such a detailed model allows...instabil- ity, generally called the Rayleigh-Taylor instability5 . A numerical model of the premixed hydrogen flame that includes all the physical

  17. Introduction to the JASIST Special Topic Issue on Web Retrieval and Mining: A Machine Learning Perspective.

    ERIC Educational Resources Information Center

    Chen, Hsinchun

    2003-01-01

    Discusses information retrieval techniques used on the World Wide Web. Topics include machine learning in information extraction; relevance feedback; information filtering and recommendation; text classification and text clustering; Web mining, based on data mining techniques; hyperlink structure; and Web size. (LRW)

  18. Protein Condensation

    NASA Astrophysics Data System (ADS)

    Gunton, James D.; Shiryayev, Andrey; Pagan, Daniel L.

    2014-07-01

    Preface; 1. Introduction; 2. Globular protein structure; 3. Experimental methods; 4. Thermodynamics and statistical mechanics; 5. Protein-protein interactions; 6. Theoretical studies of equilibrium; 7. Nucleation theory; 8. Experimental studies of nucleation; 9. Lysozyme; 10. Some other globular proteins; 11. Membrane proteins; 12. Crystallins and cataracts; 13. Sickle hemoglobin and sickle cell anemia; 14, Alzheimer's disease; Index.

  19. The Policy Context.

    ERIC Educational Resources Information Center

    Bell, Les; Bush, Tony

    This document is a chapter in "The Principles and Practice of Educational Management," which aims to provide a systematic and analytical introduction to the study of educational management. The structure of the book reflects the main substantive areas of educational leadership and management, and most of the major themes are covered in the…

  20. THE USE OF NON-TUMOR DATA IN CANCER RISK ASSESSMENT: REFLECTIONS ON BENZENE, BUTADIENE AND VINYL CHLORIDE

    EPA Science Inventory



    1.0 Introduction. Quantitative estimation of human cancer risk from exposure to chemicals has traditionally been almost exclusively based on tumor incidence in experimental animals. While improvements in carcinogenicity testing in experimental animals (1,2) and structure-...

  1. Investing in Our Future: A Guide to Child Care Financing.

    ERIC Educational Resources Information Center

    Stoney, Louise; Groginsky, Scott; Poppe, Julie

    This book investigates the innovative ways being used to ensure and finance high quality care for children. Chapter 1, "Introduction," discusses the government's role in helping to structure, build, and finance the system, as well as financing strategies. Chapter 2, "Financing Child Care Supply," addresses center-based child…

  2. Design for a Communication Course for Health Professionals.

    ERIC Educational Resources Information Center

    Kreps, Gary L.

    An approach to structuring and teaching health communication to health practitioners is presented in this paper. Following an introduction to the need for instruction in health communication, a general course description is provided, the course's purposes are discussed, and course goals are listed. The remainder of the paper contains descriptions…

  3. "Te Whariki", the New Zealand Early Childhood Curriculum: Is It Effective?

    ERIC Educational Resources Information Center

    Blaiklock, Ken

    2010-01-01

    "Te Whariki", the New Zealand early childhood curriculum, has received much praise since its introduction in 1996. There is, however, little research evidence about the implementation or effectiveness of the curriculum in early childhood centres. This article raises questions about the structure and content of "Te Whariki". The…

  4. Student Success Progress Report.

    ERIC Educational Resources Information Center

    Fresno City Coll., CA.

    The Student Success Project at Fresno City College (FCC), in California, is structured around 13 student success core indicators for which activities and completion timelines are developed annually. This report presents data on the status of the indicators as of 1994 and describes activities planned for 1995. Following an introduction, a list of…

  5. Poorly Performing Physicians: Does the Script Concordance Test Detect Bad Clinical Reasoning?

    ERIC Educational Resources Information Center

    Goulet, Francois; Jacques, Andre; Gagnon, Robert; Charlin, Bernard; Shabah, Abdo

    2010-01-01

    Introduction: Evaluation of poorly performing physicians is a worldwide concern for licensing bodies. The College des Medecins du Quebec currently assesses the clinical competence of physicians previously identified with potential clinical competence difficulties through a day-long procedure called the Structured Oral Interview (SOI). Two peer…

  6. "ELI"--The Educational Futures Game.

    ERIC Educational Resources Information Center

    Mahoney, V. L. Mike; Grantham, Lex

    This report describes ELI, a computer-based educational game that gives participants, as citizens of fictitious cities, the opportunity to examine a variety of typical community issues relating to education within the context of broader city and regional problems. After a brief introduction, the game structure is described, including the setting…

  7. Investigation of fiber tilt in paperboard

    Treesearch

    John M. Considine; David W. Vahey

    2008-01-01

    The introduction of short, tilted rods to reinforce polymer composite laminates has resulted in near doubling the strength of lap shear specimens. Paperboard is predominantly a multi-layered structure, similar to composite laminates in many ways. Improved bonding between layers should have a positive influence on mechanical performance. Tilted fibers, or z-direction...

  8. Problem Orientation in Physical Geography Teaching.

    ERIC Educational Resources Information Center

    Church, Michael

    1988-01-01

    States that the introduction of real, quantitative problems in classroom and field teaching improves scientific rigor and leads more directly to applied studies. Examines the use of problems in an introductory hydrology course, presenting teaching objectives and the full course structure to illustrate their integration with other teaching modes.…

  9. (Re)Thinking (Trans)Formation in South African (Higher) Education

    ERIC Educational Resources Information Center

    Le Grange, Lesley

    2011-01-01

    In this article I outline two broad sets of changes characterising the South African higher education landscape. The first relates to, among other things, structural changes (such as mergers and incorporations), the reorganisation of teaching programmes (influenced by the mode 2 knowledge), and the introduction of performativity regimes, most…

  10. The Scientific Attitude.

    ERIC Educational Resources Information Center

    Grinnell, Frederick

    Science is many things to many people: a way of thinking and an activity of individuals in the laboratory; a highly structured institution that recruits, instructs, and regulates its members; and a sensitive, interactive, and integrated segment of modern culture and society. This book presents an introduction to these aspects of science from the…

  11. Advancing knowledge for proactive drought planning and enhancing adaptive management for drought on rangelands: Introduction to a special issue

    USDA-ARS?s Scientific Manuscript database

    Drought is a prolonged period of abnormally low rainfall that adversely affects vegetation growth and negatively impacts land managers, ranching enterprises, and pastoral systems. As an ecological driver, drought historically shaped vegetation composition, structure, diversity, and productivity of r...

  12. Solid State Recrystallization of Single Crystal Ce:LSO Scintillator Crystals for High Resolution Detectors

    DTIC Science & Technology

    2012-06-01

    this report. The property measurements that have been focused on were the assessment of density ( Archimedes ). grain structure {optical and SEM...Scintillator", Materials Letters 60 1960-1963 (2006) [15] J.S. Reed, Forming Processes, Chapter 20 in Introduction to the Principles of Ceramic

  13. The Influence of Need-Supportive Teacher Behavior on the Motivation of Students with Congenital Deafblindness

    ERIC Educational Resources Information Center

    Haakma, Ineke; Janssen, Marleen; Minnaert, Alexander

    2017-01-01

    Introduction: Research has indicated that need-supportive learning environments positively influence students' motivation. According to self-determination theory, a need-supportive learning environment is one in which teachers provide structure, autonomy support, and involvement, and thereby support their students' psychological needs for…

  14. Transforming School Climate: Educational and Psychoanalytic Perspectives: Introduction

    ERIC Educational Resources Information Center

    Cohen, Jonathan

    2009-01-01

    School climate refers to the character and quality of school life. It is based on these patterns and reflects norms, goals, values, interpersonal relationships, teaching, learning, leadership practices, and organizational structures. School climate is at the nexus of individual and group experience. School climate is based on the individual's…

  15. Molecular genetics of Asian longhorned beetles: introduction, invasion, and spread in North America

    Treesearch

    M. D. Ginzel; L. M. Hanks; K. N. Paige

    2003-01-01

    We have used molecular techniques to study the genetic structure of Asian longhorned beetle (ALB) populations in North America, allowing us to assess the dispersal behavior of the adult beetles, the extent to which populations have spread in urban areas, and the potential for future spread.

  16. Chemical Literature Exercises and Resources (CLEAR).

    ERIC Educational Resources Information Center

    Hostettler, John D.; And Others

    These materials were developed to make the structure and use of the chemical literature clear to chemistry students and to help them become independent and intelligent users of the library. The design of Chemical Literature Exercises and Resources (CLEAR) includes a users' note and five main parts: introduction to chemical literature, chemical…

  17. Financial management in leading health care systems.

    PubMed

    Smith, D G; Wheeler, J R; Rivenson, H L; Reiter, K L

    2000-01-01

    To understand better the financial management practices and strategies of modern health care organizations, we conducted interviews with chief financial officers (CFOs) of several leading health care systems. In this introduction, we present an overview of the project and summary responses on corporate financial structures and strategic challenges facing CFOs.

  18. Appraisal and Performance Management.

    ERIC Educational Resources Information Center

    Middlewood, David

    This document is a chapter in "The Principles and Practice of Educational Management," which aims to provide a systematic and analytical introduction to the study of educational management. The structure of the book reflects the main substantive areas of educational leadership and management, and most of the major themes are covered in…

  19. Managing the Curriculum for Student Learning.

    ERIC Educational Resources Information Center

    Preedy, Margaret

    This document is a chapter in "The Principles and Practice of Educational Management," which aims to provide a systematic and analytical introduction to the study of educational management. The structure of the book reflects the main substantive areas of educational leadership and management, and most of the major themes are covered in the…

  20. Professional Development and Professionalism.

    ERIC Educational Resources Information Center

    Bolam, Ray

    This document is a chapter in "The Principles and Practice of Educational Management," which aims to provide a systematic and analytical introduction to the study of educational management. The structure of the book reflects the main substantive areas of educational leadership and management, and most of the major themes are covered in…

Top