The Impact of the Feminist Critique on Tests, Assessment, and Methodology.

ERIC Educational Resources Information Center

Lewin, Miriam; Wild, Cheryl L.

1991-01-01

Discusses early feminist efforts in psychological assessment, and reviews general issues related to feminist methodology. Successful impact and lack of impact of feminist criticism are illustrated by the revisions of the Strong Campbell Interest Inventory and the Minnesota Multiphasic Personality Inventory (1990), respectively. (SLD)

An Evaluation of Aircraft Emissions Inventory Methodology by Comparisons with Reported Airline Data

NASA Technical Reports Server (NTRS)

Daggett, D. L.; Sutkus, D. J.; DuBois, D. P.; Baughcum, S. L.

1999-01-01

This report provides results of work done to evaluate the calculation methodology used in generating aircraft emissions inventories. Results from the inventory calculation methodology are compared to actual fuel consumption data. Results are also presented that show the sensitivity of calculated emissions to aircraft payload factors. Comparisons of departures made, ground track miles flown and total fuel consumed by selected air carriers were made between U.S. Dept. of Transportation (DOT) Form 41 data reported for 1992 and results of simplified aircraft emissions inventory calculations. These comparisons provide an indication of the magnitude of error that may be present in aircraft emissions inventories. To determine some of the factors responsible for the errors quantified in the DOT Form 41 analysis, a comparative study of in-flight fuel flow data for a specific operator's 747-400 fleet was conducted. Fuel consumption differences between the studied aircraft and the inventory calculation results may be attributable to several factors. Among these are longer flight times, greater actual aircraft weight and performance deterioration effects for the in-service aircraft. Results of a parametric study on the variation in fuel use and NOx emissions as a function of aircraft payload for different aircraft types are also presented.

ALLOCATING ENVIRONMENTAL BURDENS ACROSS CO-PRODUCTS TO CREATE A LIFE CYCLE INVENTORY: IS THERE A BEST WAY?

EPA Science Inventory

Allocation methodology for creating life cycle inventories is frequently addressed, discussed and debated, yet the methodology continues to be in a state of flux. ISO 14041 puts perspective on the issues but its one-size fits all framework is being challenged. It is clear that ...

Component costs of foodborne illness: a scoping review

PubMed Central

2014-01-01

Background Governments require high-quality scientific evidence to prioritize resource allocation and the cost-of-illness (COI) methodology is one technique used to estimate the economic burden of a disease. However, variable cost inventories make it difficult to interpret and compare costs across multiple studies. Methods A scoping review was conducted to identify the component costs and the respective data sources used for estimating the cost of foodborne illnesses in a population. This review was accomplished by: (1) identifying the research question and relevant literature, (2) selecting the literature, (3) charting, collating, and summarizing the results. All pertinent data were extracted at the level of detail reported in a study, and the component cost and source data were subsequently grouped into themes. Results Eighty-four studies were identified that described the cost of foodborne illness in humans. Most studies (80%) were published in the last two decades (1992–2012) in North America and Europe. The 10 most frequently estimated costs were due to illnesses caused by bacterial foodborne pathogens, with non-typhoidal Salmonella spp. being the most commonly studied. Forty studies described both individual (direct and indirect) and societal level costs. The direct individual level component costs most often included were hospital services, physician personnel, and drug costs. The most commonly reported indirect individual level component cost was productivity losses due to sick leave from work. Prior estimates published in the literature were the most commonly used source of component cost data. Data sources were not provided or specifically linked to component costs in several studies. Conclusions The results illustrated a highly variable depth and breadth of individual and societal level component costs, and a wide range of data sources being used. This scoping review can be used as evidence that there is a lack of standardization in cost inventories in the cost of foodborne illness literature, and to promote greater transparency and detail of data source reporting. By conforming to a more standardized cost inventory, and by reporting data sources in more detail, there will be an increase in cost of foodborne illness research that can be interpreted and compared in a meaningful way. PMID:24885154

Cross-Continental Comparison of National Food Consumption Survey Methods—A Narrative Review

PubMed Central

De Keyzer, Willem; Bracke, Tatiana; McNaughton, Sarah A.; Parnell, Winsome; Moshfegh, Alanna J.; Pereira, Rosangela A.; Lee, Haeng-Shin; van’t Veer, Pieter; De Henauw, Stefaan; Huybrechts, Inge

2015-01-01

Food consumption surveys are performed in many countries. Comparison of results from those surveys across nations is difficult because of differences in methodological approaches. While consensus about the preferred methodology associated with national food consumption surveys is increasing, no inventory of methodological aspects across continents is available. The aims of the present review are (1) to develop a framework of key methodological elements related to national food consumption surveys, (2) to create an inventory of these properties of surveys performed in the continents North-America, South-America, Asia and Australasia, and (3) to discuss and compare these methodological properties cross-continentally. A literature search was performed using a fixed set of search terms in different databases. The inventory was completed with all accessible information from all retrieved publications and corresponding authors were requested to provide additional information where missing. Surveys from ten individual countries, originating from four continents are listed in the inventory. The results are presented according to six major aspects of food consumption surveys. The most common dietary intake assessment method used in food consumption surveys worldwide is the 24-HDR (24 h dietary recall), occasionally administered repeatedly, mostly using interview software. Only three countries have incorporated their national food consumption surveys into continuous national health and nutrition examination surveys. PMID:25984745

Inventory of U.S. greenhouse gas emissions and sinks: 1990-2008

DOT National Transportation Integrated Search

2010-04-01

An emissions inventory that identifies and quantifies a country's primary anthropogenic sources and sinks of greenhouse gases is essential for addressing climate change. This inventory adheres to both 1) a comprehensive and detailed set of methodolog...

A Methodology for Modeling the Flow of Military Personnel Across Air Force Active and Reserve Components

DTIC Science & Technology

2016-01-01

user, the model will use surplus inventory in one category to fill shortfalls in other categories. The TFBL model also has the capability to allow...the total force. As shown in Table 2.1, we used five-character AFSCs (four digits plus the suffix) to break out pilots in the current force as...Training Unit 4th digit Suffix 4th digit Suffix 4th digit 4th digit 2 or 3 Matches a specific aircraft designation 3 Does not match a specific

Tank waste remediation system baseline tank waste inventory estimates for fiscal year 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shelton, L.W., Westinghouse Hanford

1996-12-06

A set of tank-by-tank waste inventories is derived from historical waste models, flowsheet records, and analytical data to support the Tank Waste Remediation System flowsheet and retrieval sequence studies. Enabling assumptions and methodologies used to develop the inventories are discussed. These provisional inventories conform to previously established baseline inventories and are meant to serve as an interim basis until standardized inventory estimates are made available.

Emission Inventory for PFOS in China: Review of Past Methodologies and Suggestions

PubMed Central

Lim, Theodore Chao; Wang, Bin; Huang, Jun; Deng, Shubo; Yu, Gang

2011-01-01

Perfluorooctane sulfonate (PFOS) is a persistent, bioaccumulative, and toxic chemical that has the potential for long-range transport in the environment. Its use in a wide variety of consumer products and industrial processes makes a detailed characterization of its emissions sources very challenging. These varied emissions sources all contribute to PFOS' existence within nearly all environmental media. Currently, China is the only country documented to still be producing PFOS, though there is no China PFOS emission inventory available. This study reviews the inventory methodologies for PFOS in other countries to suggest a China-specific methodology framework for a PFOS emission inventory. The suggested framework combines unknowns for PFOS-containing product penetration into the Chinese market with product lifecycle assumptions, centralizing these diverse sources into municipal sewage treatment plants. Releases from industrial sources can be quantified separately using another set of emission factors. Industrial sources likely to be relevant to the Chinese environment are identified. PMID:22125449

A Multinomial Logit Approach to Estimating Regional Inventories by Product Class

Treesearch

Lawrence Teeter; Xiaoping Zhou

1998-01-01

Current timber inventory projections generally lack information on inventory by product classes. Most models available for inventory projection and linked to supply analyses are limited to projecting aggregate softwood and hardwood. The objective of this research is to develop a methodology to distribute the volume on each FIA survey plot to product classes and...

State-of-the-art methodology of forest inventory: a symposium proceedings.

Treesearch

Vernon J. LaBau; Tiberius Cunia

1990-01-01

The state-of-the-art of forest inventory methodology, being closely integrated with the fast-moving, high technology computer world, has been changing at a rapid pace over the past decade. Several successful conferences were held during the 1980s with the goal and purpose of staying abreast of such change. This symposium was conceived, not just with the idea of helping...

The Development of the Global Citizenship Inventory for Adolescents

ERIC Educational Resources Information Center

Van Gent, Marije; Carabain, Christine; De Goede, Irene; Boonstoppel, Evelien; Hogeling, Lette

2013-01-01

In this paper we report on the development of an inventory that measures global citizenship among adolescents. The methodology used consists of cognitive interviews for questionnaire design and explorative and confirmatory factor analyses among several datasets. The resulting Global Citizenship Inventory (GCI) includes a global citizenship…

A methodology and decision support tool for informing state-level bioenergy policymaking: New Jersey biofuels as a case study

NASA Astrophysics Data System (ADS)

Brennan-Tonetta, Margaret

This dissertation seeks to provide key information and a decision support tool that states can use to support long-term goals of fossil fuel displacement and greenhouse gas reductions. The research yields three outcomes: (1) A methodology that allows for a comprehensive and consistent inventory and assessment of bioenergy feedstocks in terms of type, quantity, and energy potential. Development of a standardized methodology for consistent inventorying of biomass resources fosters research and business development of promising technologies that are compatible with the state's biomass resource base. (2) A unique interactive decision support tool that allows for systematic bioenergy analysis and evaluation of policy alternatives through the generation of biomass inventory and energy potential data for a wide variety of feedstocks and applicable technologies, using New Jersey as a case study. Development of a database that can assess the major components of a bioenergy system in one tool allows for easy evaluation of technology, feedstock and policy options. The methodology and decision support tool is applicable to other states and regions (with location specific modifications), thus contributing to the achievement of state and federal goals of renewable energy utilization. (3) Development of policy recommendations based on the results of the decision support tool that will help to guide New Jersey into a sustainable renewable energy future. The database developed in this research represents the first ever assessment of bioenergy potential for New Jersey. It can serve as a foundation for future research and modifications that could increase its power as a more robust policy analysis tool. As such, the current database is not able to perform analysis of tradeoffs across broad policy objectives such as economic development vs. CO2 emissions, or energy independence vs. source reduction of solid waste. Instead, it operates one level below that with comparisons of kWh or GGE generated by different feedstock/technology combinations at the state and county level. Modification of the model to incorporate factors that will enable the analysis of broader energy policy issues as those mentioned above, are recommended for future research efforts.

Large Uncertainties in Urban-Scale Carbon Emissions

NASA Astrophysics Data System (ADS)

Gately, C. K.; Hutyra, L. R.

2017-10-01

Accurate estimates of fossil fuel carbon dioxide (FFCO2) emissions are a critical component of local, regional, and global climate agreements. Current global inventories of FFCO2 emissions do not directly quantify emissions at local scales; instead, spatial proxies like population density, nighttime lights, and power plant databases are used to downscale emissions from national totals. We have developed a high-resolution (hourly, 1 km2) bottom-up Anthropogenic Carbon Emissions System (ACES) for FFCO2, based on local activity data for the year 2011 across the northeastern U.S. We compare ACES with three widely used global inventories, finding significant differences at regional (20%) and city scales (50-250%). At a spatial resolution of 0.1°, inventories differ by over 100% for half of the grid cells in the domain, with the largest differences in urban areas and oil and gas production regions. Given recent U.S. federal policy pull backs regarding greenhouse gas emissions reductions, inventories like ACES are crucial for U.S. actions, as the impetus for climate leadership has shifted to city and state governments. The development of a robust carbon monitoring system to track carbon fluxes is critical for emissions benchmarking and verification. We show that existing downscaled inventories are not suitable for urban emissions monitoring, as they do not consider important local activity patterns. The ACES methodology is designed for easy updating, making it suitable for emissions monitoring under most city, regional, and state greenhouse gas mitigation initiatives, in particular, for the small- and medium-sized cities that lack the resources to regularly perform their own bottom-up emissions inventories.

Use of a land-use-based emissions inventory in delineating clean-air zones

Treesearch

Victor S. Fahrer; Howard A. Peters

1977-01-01

Use of a land-use-based emissions inventory from which air-pollution estimates can be projected was studied. First the methodology used to establish a land-use-based emission inventory is described. Then this inventory is used as input in a simple model that delineates clean air and buffer zones. The model is applied to the town of Burlington, Massachusetts....

Integrated payload and mission planning, phase 3. Volume 4: Optimum utilization of Spacelab racks and pallets

NASA Technical Reports Server (NTRS)

Logston, R. G.; Budris, G. D.

1977-01-01

The methodology to optimize the utilization of Spacelab racks and pallets and to apply this methodology to the early STS Spacelab missions was developed. A review was made of Spacelab Program requirements and flow plans, generic flow plans for racks and pallets were examined, and the principal optimization criteria and methodology were established. Interactions between schedule, inventory, and key optimization factors; schedule and cost sensitivity to optional approaches; and the development of tradeoff methodology were addressed. This methodology was then applied to early spacelab missions (1980-1982). Rack and pallet requirements and duty cycles were defined, a utilization assessment was made, and several trade studies performed involving varying degrees of Level IV integration, inventory level, and shared versus dedicated Spacelab racks and pallets.

Detection of counterfeit electronic components through ambient mass spectrometry and chemometrics.

PubMed

Pfeuffer, Kevin P; Caldwell, Jack; Shelley, Jake T; Ray, Steven J; Hieftje, Gary M

2014-09-21

In the last several years, illicit electronic components have been discovered in the inventories of several distributors and even installed in commercial and military products. Illicit or counterfeit electronic components include a broad category of devices that can range from the correct unit with a more recent date code to lower-specification or non-working systems with altered names, manufacturers and date codes. Current methodologies for identification of counterfeit electronics rely on visual microscopy by expert users and, while effective, are very time-consuming. Here, a plasma-based ambient desorption/ionization source, the flowing atmospheric pressure afterglow (FAPA) is used to generate a mass-spectral fingerprint from the surface of a variety of discrete electronic integrated circuits (ICs). Chemometric methods, specifically principal component analysis (PCA) and the bootstrapped error-adjusted single-sample technique (BEAST), are used successfully to differentiate between genuine and counterfeit ICs. In addition, chemical and physical surface-removal techniques are explored and suggest which surface-altering techniques were utilized by counterfeiters.

Some aspects of inventory integration

Treesearch

Jerry Leech

2000-01-01

Integrating such disparate topics as are covered by this conference is daunting, because to do it well requires in-depth expertise of many complex technical methodologies. Based on experiences in Asia and Australia, it is suggested that there can never be one inventory design or one planning system, it will increasingly be necessary to implement specialized inventories...

Toward Automated Inventory Modeling in Life Cycle Assessment: The Utility of Semantic Data Modeling to Predict Real-WorldChemical Production

EPA Science Inventory

A set of coupled semantic data models, i.e., ontologies, are presented to advance a methodology towards automated inventory modeling of chemical manufacturing in life cycle assessment. The cradle-to-gate life cycle inventory for chemical manufacturing is a detailed collection of ...

Coupling Computer-Aided Process Simulation and Estimations of Emissions and Land Use for Rapid Life Cycle Inventory Modeling

EPA Science Inventory

A methodology is described for developing a gate-to-gate life cycle inventory (LCI) of a chemical manufacturing process to support the application of life cycle assessment in the design and regulation of sustainable chemicals. The inventories were derived by first applying proces...

Timber resource statistics for the Kantishna block, Tanana inventory unit, Alaska, 1973.

Treesearch

Karl M. Hegg

1982-01-01

This report for the 2.9-million-acre Kantishna block is the second of four on the 14-million-acre Tanana Valley inventory unit. Comments are made on general landform, timber use, recreational potential, agricultural developments, forest defect, regeneration, and inventory methodology. Tables are provided for commercial forest land and for operable noncommercial forest...

Continuous inventories and the components of change

Treesearch

Frnacis A. Roesch

2004-01-01

The consequences of conducting a continuous inventory that utilizes measurements on overlapping temporal intervals of varying length on compatible estimation systems for the components of growth are explored. The time interpenetrating sample design of the USDA Forest Service Forest Inventory and Analysis Program is used as an example. I show why estimation of the...

Evaluating Plot Designs for the Tropics

Treesearch

Paul C. van Deusen; Bruce Bayle

1991-01-01

Theory and procedures are reviewed for determining the best type of plot for a given forest inventory. A general methodology is given that clarifies the relationship between different plot designs and the associated methods to produce the inventory estimates.

Ask Him or Test Him?

ERIC Educational Resources Information Center

Rose, Harriett A.; Elton, Charles F.

1970-01-01

Proposes and demonstrates methodology for investigation of relationship between expressed and inventoried interests. Additional investigations comparing scores on the Vocational Preference Inventory, the SVIB, and expressed choice might establish the comparative validities of these methods of assessing vocational interest. (Author)

High-global warming potential F-gas emissions in California: comparison of ambient-based versus inventory-based emission estimates, and implications of refined estimates.

PubMed

Gallagher, Glenn; Zhan, Tao; Hsu, Ying-Kuang; Gupta, Pamela; Pederson, James; Croes, Bart; Blake, Donald R; Barletta, Barbara; Meinardi, Simone; Ashford, Paul; Vetter, Arnie; Saba, Sabine; Slim, Rayan; Palandre, Lionel; Clodic, Denis; Mathis, Pamela; Wagner, Mark; Forgie, Julia; Dwyer, Harry; Wolf, Katy

2014-01-21

To provide information for greenhouse gas reduction policies, the California Air Resources Board (CARB) inventories annual emissions of high-global-warming potential (GWP) fluorinated gases, the fastest growing sector of greenhouse gas (GHG) emissions globally. Baseline 2008 F-gas emissions estimates for selected chlorofluorocarbons (CFC-12), hydrochlorofluorocarbons (HCFC-22), and hydrofluorocarbons (HFC-134a) made with an inventory-based methodology were compared to emissions estimates made by ambient-based measurements. Significant discrepancies were found, with the inventory-based emissions methodology resulting in a systematic 42% under-estimation of CFC-12 emissions from older refrigeration equipment and older vehicles, and a systematic 114% overestimation of emissions for HFC-134a, a refrigerant substitute for phased-out CFCs. Initial, inventory-based estimates for all F-gas emissions had assumed that equipment is no longer in service once it reaches its average lifetime of use. Revised emission estimates using improved models for equipment age at end-of-life, inventories, and leak rates specific to California resulted in F-gas emissions estimates in closer agreement to ambient-based measurements. The discrepancies between inventory-based estimates and ambient-based measurements were reduced from -42% to -6% for CFC-12, and from +114% to +9% for HFC-134a.

Accouting for Greenhouse Gas Emissions from Reservoirs

NASA Astrophysics Data System (ADS)

Beaulieu, J. J.; Deemer, B. R.; Harrison, J. A.; Nietch, C. T.; Waldo, S.

2016-12-01

Nearly three decades of research has demonstrated that the impoundment of rivers and the flooding of terrestrial ecosystems behind dams can increase rates of greenhouse gas emission, particularly methane. The 2006 IPCC Guidelines for National Greenhouse Gas Inventories includes a methodology for estimating methane emissions from flooded lands, but the methodology was published as an appendix to be used as a `basis for future methodological development' due to a lack of data. Since the 2006 Guidelines were published there has been a 6-fold increase in the number of peer reviewed papers published on the topic including reports from reservoirs in India, China, Africa, and Russia. Furthermore, several countries, including Iceland, Switzerland, and Finland, have developed country specific methodologies for including flooded lands methane emissions in their National Greenhouse Gas Inventories. This presentation will include a review of the literature on flooded land methane emissions and approaches that have been used to upscale emissions for national inventories. We will also present ongoing research in the United States to develop a country specific methodology. In the U.S., research approaches include: 1) an effort to develop predictive relationships between methane emissions and reservoir characteristics that are available in national databases, such as reservoir size and drainage area, and 2) a national-scale probabilistic survey of reservoir methane emissions linked to the National Lakes Assessment.

Accounting For Greenhouse Gas Emissions From Flooded ...

EPA Pesticide Factsheets

Nearly three decades of research has demonstrated that the inundation of rivers and terrestrial ecosystems behind dams can lead to enhanced rates of greenhouse gas emissions, particularly methane. The 2006 IPCC Guidelines for National Greenhouse Gas Inventories includes a methodology for estimating methane emissions from flooded lands, but the methodology was published as an appendix to be used a ‘basis for future methodological development’ due to a lack of data. Since the 2006 Guidelines were published there has been a 6-fold increase in the number of peer reviewed papers published on the topic including reports from reservoirs in India, China, Africa, and Russia. Furthermore, several countries, including Iceland, Switzerland, and Finland, have developed country specific methodologies for including flooded lands methane emissions in their National Greenhouse Gas Inventories. This presentation will include a review of the literature on flooded land methane emissions and approaches that have been used to upscale emissions for national inventories. We will also present ongoing research in the United States to develop a country specific methodology. The research approaches include 1) an effort to develop predictive relationships between methane emissions and reservoir characteristics that are available in national databases, such as reservoir size and drainage area, and 2) a national-scale probabilistic survey of reservoir methane emissions. To inform th

Accounting for Greenhouse Gas Emissions from Reservoirs ...

EPA Pesticide Factsheets

Nearly three decades of research has demonstrated that the impoundment of rivers and the flooding of terrestrial ecosystems behind dams can increase rates of greenhouse gas emission, particularly methane. The 2006 IPCC Guidelines for National Greenhouse Gas Inventories includes a methodology for estimating methane emissions from flooded lands, but the methodology was published as an appendix to be used as a ‘basis for future methodological development’ due to a lack of data. Since the 2006 Guidelines were published there has been a 6-fold increase in the number of peer reviewed papers published on the topic including reports from reservoirs in India, China, Africa, and Russia. Furthermore, several countries, including Iceland, Switzerland, and Finland, have developed country specific methodologies for including flooded lands methane emissions in their National Greenhouse Gas Inventories. This presentation will include a review of the literature on flooded land methane emissions and approaches that have been used to upscale emissions for national inventories. We will also present ongoing research in the United States to develop a country specific methodology. In the U.S., research approaches include: 1) an effort to develop predictive relationships between methane emissions and reservoir characteristics that are available in national databases, such as reservoir size and drainage area, and 2) a national-scale probabilistic survey of reservoir methane em

Timber resource statistics for the upper Tanana block, Tanana inventory unit, Alaska, 1974.

Treesearch

Karl M. Hegg

1983-01-01

This report for the 3.6-million-acre Upper Tanana block is the third of four on the 14-million-acre Tanana Valley forest inventory unit. Descriptions of area, climate, forest, general resource use, and inventory methodology are presented. Area and volume tables are provided for commercial and operable noncommercial forest lands. Estimates for commercial forest land...

Estimating dead wood during national forest inventories: a review of inventory methodologies and suggestions for harmonization

Treesearch

Christopher W. Woodall; Jacques Rondeux; Pieter J. Verkerk; Goran Stahl

2009-01-01

Efforts to assess forest ecosystem carbon stocks, biodiversity, and fire hazards have spurred the need for comprehensive assessments of forest ecosystem dead wood (DW) attributes around the world. Currently, information regarding the prevalence, status, and methods of DW inventories occurring in the world?s forested landscapes is scattered. The goal of this study is to...

Application of life-cycle assessment (LCA) methodology for valorization of building demolition materials and products

NASA Astrophysics Data System (ADS)

Sara, Balazs; Antonini, Ernesto; Tarantini, Mario

2001-02-01

The VAMP project (VAlorization of building demolition Materials and Products, LIFE 98/ENV/IT/33) aims to build an effective and innovative information system to support decision making in selective demolition activity and to manage the valorization (recovery-reuse-recycling) of waste flows produced by the construction and demolition (C&D) sector. The VAMP information system will be tested it in Italy in some case studies of selective demolition. In this paper the proposed demolition-valorization system will be compared to the traditional one in a life cycle perspective, applying LCA methodology to highlight the advantages of VAMP system from an eco-sustainability point of view. Within the system boundaries demolition processes, transport of demolition wastes and its recovery/treatment or disposal in landfill were included. Processes avoided due to reuse-recycling activities, such as extraction of natural resources and manufacture of building materials and components, were considered too. In this paper data collection procedure applied in inventory and impact assessment phases and a general overview about data availability for LCA studies in this sector are presented. Results of application of VAMP methodology to a case study are discussed and compared with a simulated traditional demolition of the same building. Environmental advantages of VAMP demolition-valorization system are demonstrated quantitatively emphasizing the special importance of reuse of building components with high demand of energy for manufacture.

Land Cover Mapping for the Development of Green House Gas (GHG) Inventories in the Eastern and Southern Africa Region

NASA Astrophysics Data System (ADS)

Wakhayanga, J. A.; Oduor, P.; Korme, T.; Farah, H.; Limaye, A. S.; Irwin, D.; Artis, G.

2014-12-01

Anthropogenic activities are responsible for the largest share of green house gas (GHG) emissions. Research has shown that greenhouse gases cause radioactive forcing in the stratosphere, leading to ozone depletion. Different land cover types act as sources or sinks of carbon dioxide (CO2), the most dominant GHG.Under the oversight of the United Nations Framework Convention on Climate Change (UNFCCC) the Eastern and Southern Africa (ESA) region countries are developing Sustainable National GHG Inventory Management Systems. While the countries in the ESA region are making substantial progress in setting up GHG inventories, there remains significant constraints in the development of quality and sustainable National GHG Inventory Systems. For instance, there are fundamental challenges in capacity building and technology transfer, which can affect timely and consistent reporting on the land use, land-use change and forestry (LULUCF) component of the GHG inventory development. SERVIR Eastern and Southern Africa is a partnership project between the National Aeronautics and Space Administration (NASA) and the Regional Center for Mapping of Resources for Development (RCMRD), an intergovernmental organization in Africa, with 21 member states in the ESA region. With support from the United States Agency for International Development (USAID), SERVIR ESA is implementing the GHG Project in 9 countries. The main deliverables of the project are land cover maps for the years 2000 and 2010 (also 1990 for Malawi and Rwanda), and related technical reports, as well as technical training in land cover mapping using replicable methodologies. Landsat imagery which is freely available forms the main component of earth observation input data, in addition to ancillary data collected from each country. Supervised classification using maximum likelihood algorithm is applied to the Landsat images. The work is completed for the initial 6 countries (Malawi, Zambia, Rwanda, Tanzania, Botswana, and Namibia) and ongoing in the additional 3 countries (Ethiopia, Kenya and Uganda). Our presentation focuses on the status of the GHG Project, with particular emphasis on the replicable methods adopted, dissemination mechanisms and technology transfer, as well as the database of products delivered to participating countries.

Evaluation of Life Cycle Assessment (LCA) for Roadway Drainage Systems.

PubMed

Byrne, Diana M; Grabowski, Marta K; Benitez, Amy C B; Schmidt, Arthur R; Guest, Jeremy S

2017-08-15

Roadway drainage design has traditionally focused on cost-effectively managing water quantity; however, runoff carries pollutants, posing risks to the local environment and public health. Additionally, construction and maintenance incur costs and contribute to global environmental impacts. While life cycle assessment (LCA) can potentially capture local and global environmental impacts of roadway drainage and other stormwater systems, LCA methodology must be evaluated because stormwater systems differ from wastewater and drinking water systems to which LCA is more frequently applied. To this end, this research developed a comprehensive model linking roadway drainage design parameters to LCA and life cycle costing (LCC) under uncertainty. This framework was applied to 10 highway drainage projects to evaluate LCA methodological choices by characterizing environmental and economic impacts of drainage projects and individual components (basin, bioswale, culvert, grass swale, storm sewer, and pipe underdrain). The relative impacts of drainage components varied based on functional unit choice. LCA inventory cutoff criteria evaluation showed the potential for cost-based criteria, which performed better than mass-based criteria. Finally, the local aquatic benefits of grass swales and bioswales offset global environmental impacts for four impact categories, highlighting the need to explicitly consider local impacts (i.e., direct emissions) when evaluating drainage technologies.

Constructing a Cross-Domain Resource Inventory: Key Components and Results of the EarthCube CINERGI Project.

NASA Astrophysics Data System (ADS)

Zaslavsky, I.; Richard, S. M.; Malik, T.; Hsu, L.; Gupta, A.; Grethe, J. S.; Valentine, D. W., Jr.; Lehnert, K. A.; Bermudez, L. E.; Ozyurt, I. B.; Whitenack, T.; Schachne, A.; Giliarini, A.

2015-12-01

While many geoscience-related repositories and data discovery portals exist, finding information about available resources remains a pervasive problem, especially when searching across multiple domains and catalogs. Inconsistent and incomplete metadata descriptions, disparate access protocols and semantic differences across domains, and troves of unstructured or poorly structured information which is hard to discover and use are major hindrances toward discovery, while metadata compilation and curation remain manual and time-consuming. We report on methodology, main results and lessons learned from an ongoing effort to develop a geoscience-wide catalog of information resources, with consistent metadata descriptions, traceable provenance, and automated metadata enhancement. Developing such a catalog is the central goal of CINERGI (Community Inventory of EarthCube Resources for Geoscience Interoperability), an EarthCube building block project (earthcube.org/group/cinergi). The key novel technical contributions of the projects include: a) development of a metadata enhancement pipeline and a set of document enhancers to automatically improve various aspects of metadata descriptions, including keyword assignment and definition of spatial extents; b) Community Resource Viewers: online applications for crowdsourcing community resource registry development, curation and search, and channeling metadata to the unified CINERGI inventory, c) metadata provenance, validation and annotation services, d) user interfaces for advanced resource discovery; and e) geoscience-wide ontology and machine learning to support automated semantic tagging and faceted search across domains. We demonstrate these CINERGI components in three types of user scenarios: (1) improving existing metadata descriptions maintained by government and academic data facilities, (2) supporting work of several EarthCube Research Coordination Network projects in assembling information resources for their domains, and (3) enhancing the inventory and the underlying ontology to address several complicated data discovery use cases in hydrology, geochemistry, sedimentology, and critical zone science. Support from the US National Science Foundation under award ICER-1343816 is gratefully acknowledged.

THE 1985 NAPAP EMISSIONS INVENTORY: DEVELOPMENT OF SPECIES ALLOCATION FACTORS

EPA Science Inventory

The report describes the methodologies and data bases used to develop species allocation factors and data processing software used to develop the 1985 National Acid Precipitation Assessment Program (NAPAP) Modelers' Emissions Inventory (Version 2). Species allocation factors were...

Cyber Power Potential of the Army’s Reserve Component

DTIC Science & Technology

2017-01-01

and could extend logically to include electric power, water, food, railway, gas pipelines , and so forth. One consideration to note is that in cases...29 CHAPTER FOUR Army Reserve Component Cyber Inventory Analysis .......................... 31...Background and Analytical Framework ........................................................... 31 Army Reserve Component Cyber Inventory Analysis , 2015

A novel statistical methodology to overcome sampling irregularities in the forest inventory data and to model forest changes under dynamic disturbance regimes

Treesearch

Nikolay Strigul; Jean Lienard

2015-01-01

Forest inventory datasets offer unprecedented opportunities to model forest dynamics under evolving environmental conditions but they are analytically challenging due to irregular sampling time intervals of the same plot, across the years. We propose here a novel method to model dynamic changes in forest biomass and basal area using forest inventory data. Our...

Volume equations for the Northern Research Station's Forest Inventory and Analysis Program as of 2010

Treesearch

Patrick D. Miles; Andrew D. Hill

2010-01-01

The U.S. Forest Service's Forest Inventory and Analysis (FIA) program collects sample plot data on all forest ownerships across the United States. This report documents the methodology used to estimate live-tree gross, net, and sound volume for the 24 States inventoried by the Northern Research Station's (NRS) FIA unit. Sound volume is of particular interest...

Evaluation design of New York City's regulations on nutrition, physical activity, and screen time in early child care centers.

PubMed

Breck, Andrew; Goodman, Ken; Dunn, Lillian; Stephens, Robert L; Dawkins, Nicola; Dixon, Beth; Jernigan, Jan; Kakietek, Jakub; Lesesne, Catherine; Lessard, Laura; Nonas, Cathy; O'Dell, Sarah Abood; Osuji, Thearis A; Bronson, Bernice; Xu, Ye; Kettel Khan, Laura

2014-10-16

This article describes the multi-method cross-sectional design used to evaluate New York City Department of Health and Mental Hygiene's regulations of nutrition, physical activity, and screen time for children aged 3 years or older in licensed group child care centers. The Center Evaluation Component collected data from a stratified random sample of 176 licensed group child care centers in New York City. Compliance with the regulations was measured through a review of center records, a facility inventory, and interviews of center directors, lead teachers, and food service staff. The Classroom Evaluation Component included an observational and biometric study of a sample of approximately 1,400 children aged 3 or 4 years attending 110 child care centers and was designed to complement the center component at the classroom and child level. The study methodology detailed in this paper may aid researchers in designing policy evaluation studies that can inform other jurisdictions considering similar policies.

UW Inventory of Freight Emissions (WIFE3) heavy duty diesel vehicle web calculator methodology.

DOT National Transportation Integrated Search

2013-09-01

This document serves as an overview and technical documentation for the University of Wisconsin Inventory of : Freight Emissions (WIFE3) calculator. The WIFE3 web calculator rapidly estimates future heavy duty diesel : vehicle (HDDV) roadway emission...

INTEGRATION OF POLLUTION PREVENTION TOOLS

EPA Science Inventory

A prototype computer-based decision support system was designed to provide small businesses with an integrated pollution prevention methodology. Preliminary research involved compilation of an inventory of existing pollution prevention tools (i.e., methodologies, software, etc.),...

Distribution of 137Cs on components in urban area four years after the Fukushima Dai-ichi Nuclear Power Plant accident.

PubMed

Yoshimura, K; Saito, K; Fujiwara, K

2017-11-01

Distribution of 137 Cs on components in urban areas such as roofs and roads is crucial for evaluating the behavior of radiocesium and ambient dose rates in the area. This study evaluated relative 137 Cs inventories, which are defined as the relative values of 137 Cs inventory on each component to that on a nearby permeable plane field, for 11 buildings in the evacuation zone about four years after the Fukushima Dai-ichi Nuclear Power Plant accident. The average relative inventory of paved ground accounted for 0.18 of that on permeable plane fields. Other components showed small average values of less than 0.1, indicating rapid removal of radiocesium from urban areas even without decontamination. The differences in the relative inventories on roads and roofs with those in the case of Europe suggest that human activity and component materials largely affect the reduction of radiocesium in urban area. Copyright © 2017 Elsevier Ltd. All rights reserved.

ESP v1.0: Methodology for Exploring Emission Impacts of Future Scenarios in the United States

EPA Science Inventory

This article presents a methodology for creating anthropogenic emission inventories that can be used to simulate future regional air quality. The Emission Scenario Projection (ESP) methodology focuses on energy production and use, the principal sources of many air pollutants. Emi...

A Joint Replenishment Inventory Model with Lost Sales

NASA Astrophysics Data System (ADS)

Devy, N. L.; Ai, T. J.; Astanti, R. D.

2018-04-01

This paper deals with two items joint replenishment inventory problem, in which the demand of each items are constant and deterministic. Inventory replenishment of items is conducted periodically every T time intervals. Among of these replenishments, joint replenishment of both items is possible. It is defined that item i is replenished every ZiT time intervals. Replenishment of items are instantaneous. All of shortages are considered as lost sales. The maximum allowance for lost sales of item i is Si. Mathematical model is formulated in order to determining the basic time cycle T, replenishment multiplier Zi , and maximum lost sales Si in order to minimize the total cost per unit time. A solution methodology is proposed for solve the model and a numerical example is provided for demonstrating the effectiveness of the proposed methodology.

Mapping forest inventory and analysis data attributes within the framework of double sampling for stratification design

Treesearch

David C. Chojnacky; Randolph H. Wynne; Christine E. Blinn

2009-01-01

Methodology is lacking to easily map Forest Inventory and Analysis (FIA) inventory statistics for all attribute variables without having to develop separate models and methods for each variable. We developed a mapping method that can directly transfer tabular data to a map on which pixels can be added any way desired to estimate carbon (or any other variable) for a...

Researching Reciprocal Leadership: Using the Consciousness Quotient Inventory (CQ-i) as a Pilot Methodology to Explore Leadership with the Context of a School-University Partnership

ERIC Educational Resources Information Center

Poultney, Val; Fordham, Jon

2018-01-01

This article looks at the potential of using an online self-completing inventory that measures leadership consciousness awareness. The Consciousness Quotient inventory (CQ-i) has been developed to encourage leaders to be more conscious of their ability to be accountable and responsible for their leadership practice. The CQ-i as a method for…

A comprehensive approach for the evaluation and comparison of emission inventories in Madrid

NASA Astrophysics Data System (ADS)

Vedrenne, Michel; Borge, Rafael; Lumbreras, Julio; Rodríguez, María Encarnación; de la Paz, David; Pérez, Javier; Manuel de Andrés, Juan; Quaassdorff, Christina

2016-11-01

Emission inventories provide a description of the polluting activities that occur across a specific geographic domain, and are widely used as input for air quality modelling for the assessment of compliance with environmental legislation. The spatial scale to which these inventories are referred has an influence in the representativeness of the emission estimates, as these are underpinned by a number of considerations and data with different levels of granularity. This study proposes a comprehensive framework for the evaluation of emission inventories that allows identifying methodological issues by examining differences in performance to a chemical transport model (CTM) when such inventories are used as input. To demonstrate the approach, a comparison between the national and regional emissions inventories for the Autonomous Community of Madrid (ACM) was carried out (NEI and REI respectively). The analysis revealed discrepancies in compilation methodologies for the domestic sector (SNAP 02), industrial combustion (SNAP 03), road traffic (SNAP 07) and other mobile sources (SNAP 08); most of the differences were originally caused by taking into account different activity variables, fuel mixes, and spatial disaggregation and allocation proxies. The granularity of the base data (statistics, fuel consumption, facilities, etc.) proved to be an essential limiting factor, which means that whenever bottom-up approaches were followed, the description of emission sectors tended to be more accurate.

Greenhouse gases accounting and reporting for waste management--a South African perspective.

PubMed

Friedrich, Elena; Trois, Cristina

2010-11-01

This paper investigates how greenhouse gases are accounted and reported in the waste sector in South Africa. Developing countries (including South Africa) do not have binding emission reduction targets, but many of them publish different greenhouse gas emissions data which have been accounted and reported in different ways. Results show that for South Africa, inventories at national and municipal level are the most important tools in the process of accounting and reporting greenhouse gases from waste. For the development of these inventories international initiatives were important catalysts at national and municipal levels, and assisted in developing local expertise, resulting in increased output quality. However, discrepancies in the methodology used to account greenhouse gases from waste between inventories still remain a concern. This is a challenging issue for developing countries, especially African ones, since higher accuracy methods are more data intensive. Analysis of the South African inventories shows that results from the recent inventories can not be compared with older ones due to the use of different accounting methodologies. More recently the use of Clean Development Mechanism (CDM) procedures in Africa, geared towards direct measurements of greenhouse gases from landfill sites, has increased and resulted in an improvement of the quality of greenhouse gas inventories at municipal level. Copyright © 2010 Elsevier Ltd. All rights reserved.

Information logistics: A production-line approach to information services

NASA Technical Reports Server (NTRS)

Adams, Dennis; Lee, Chee-Seng

1991-01-01

Logistics can be defined as the process of strategically managing the acquisition, movement, and storage of materials, parts, and finished inventory (and the related information flow) through the organization and its marketing channels in a cost effective manner. It is concerned with delivering the right product to the right customer in the right place at the right time. The logistics function is composed of inventory management, facilities management, communications unitization, transportation, materials management, and production scheduling. The relationship between logistics and information systems is clear. Systems such as Electronic Data Interchange (EDI), Point of Sale (POS) systems, and Just in Time (JIT) inventory management systems are important elements in the management of product development and delivery. With improved access to market demand figures, logisticians can decrease inventory sizes and better service customer demand. However, without accurate, timely information, little, if any, of this would be feasible in today's global markets. Information systems specialists can learn from logisticians. In a manner similar to logistics management, information logistics is concerned with the delivery of the right data, to the ring customer, at the right time. As such, information systems are integral components of the information logistics system charged with providing customers with accurate, timely, cost-effective, and useful information. Information logistics is a management style and is composed of elements similar to those associated with the traditional logistics activity: inventory management (data resource management), facilities management (distributed, centralized and decentralized information systems), communications (participative design and joint application development methodologies), unitization (input/output system design, i.e., packaging or formatting of the information), transportations (voice, data, image, and video communication systems), materials management (data acquisition, e.g., EDI, POS, external data bases, data entry) and production scheduling (job, staff, and project scheduling).

Principal components analysis of the Neurobehavioral Symptom Inventory in a nonclinical civilian sample.

PubMed

Sullivan, Karen A; Lurie, Janine K

2017-01-01

The study examined the component structure of the Neurobehavioral Symptom Inventory (NSI) under five different models. The evaluated models comprised the full NSI (NSI-22) and the NSI-20 (NSI minus two orphan items). A civilian nonclinical sample was used. The 575 volunteers were predominantly university students who screened negative for mild TBI. The study design was cross-sectional, with questionnaires administered online. The main measure was the Neurobehavioral Symptom Inventory. Subscale, total and embedded validity scores were derived (the Validity-10, the LOW6, and the NIM5). In both models, the principal components analysis yielded two intercorrelated components (psychological and somatic/sensory) with acceptable internal consistency (alphas > 0.80). In this civilian nonclinical sample, the NSI had two underlying components. These components represent psychological and somatic/sensory neurobehavioral symptoms.

Development of a Meiosis Concept Inventory

ERIC Educational Resources Information Center

Kalas, Pamela; O'Neill, Angie; Pollock, Carol; Birol, Gulnur

2013-01-01

We have designed, developed, and validated a 17-question Meiosis Concept Inventory (Meiosis CI) to diagnose student misconceptions on meiosis, which is a fundamental concept in genetics. We targeted large introductory biology and genetics courses and used published methodology for question development, which included the validation of questions by…

Integration of DNA barcoding into an ongoing inventory of complex tropical biodiversity

USDA-ARS?s Scientific Manuscript database

The extensive use of DNA barcoding technology in a large inventory of Macrolepidoptera and their parasitoids is documented. The methodology used and its practical applications are summarized, and numerous examples of how DNA barcoding has untangled complexes of cryptic species of butterflies, moths...

Assessment of seismic risk in Tashkent, Uzbekistan and Bishkek, Kyrgyz Republic

USGS Publications Warehouse

Erdik, M.; Rashidov, T.; Safak, E.; Turdukulov, A.

2005-01-01

The impact of earthquakes in urban centers prone to disastrous earthquakes necessitates the analysis of associated risk for rational formulation of contingency plans and mitigation strategies. In urban centers the seismic risk is best quantified and portrayed through the preparation of 'Earthquake damage and Loss Scenarios'. The components of such scenarios are the assessment of the hazard, inventories and the vulnerabilities of elements at risk. For the development of earthquake risk scenario in Tashkent-Uzbekistan and Bishkek-Kyrgyzstan an approach based on spectral displacements is utilized. This paper will present the important features of a comprehensive study, highlight the methodology, discuss the results and provide insights to the future developments. ?? 2005 Elsevier Ltd. All rights reserved.

RFID in Space: Exploring the Feasibility and Performance of Gen 2 Tags as a Means of Tracking Equipment, Supplies, and Consumable Products in Cargo Transport Bags onboard a Space Vehicle or Habitat

NASA Technical Reports Server (NTRS)

Jones, Erick C.; Richards, Casey; Herstein, Kelli; Franca, Rodrigo; Yagoda, Evan L.; Vasquez, Reuben

2008-01-01

Current inventory management techniques for consumables and supplies aboard space vehicles are burdensome and time consuming. Inventory of food, clothing, and supplies are taken periodically by manually scanning the barcodes on each item. The inaccuracy of reading barcodes and the excessive amount of time it takes for the astronauts to perform this function would be better spent doing scientific experiments. Therefore, there is a need for an alternative method of inventory control by NASA astronauts. Radio Frequency Identification (RFID) is an automatic data capture technology that has potential to create a more effective and user-friendly inventory management system (IMS). In this paper we introduce a Design for Six Sigma Research (DFSS-R) methodology that allows for reliability testing of RFID systems. The research methodology uses a modified sequential design of experiments process to test and evaluate the quality of commercially available RFID technology. The results from the experimentation are compared to the requirements provided by NASA to evaluate the feasibility of using passive Generation 2 RFID technology to improve inventory control aboard crew exploration vehicles.

A demand-centered, hybrid life-cycle methodology for city-scale greenhouse gas inventories.

PubMed

Ramaswami, Anu; Hillman, Tim; Janson, Bruce; Reiner, Mark; Thomas, Gregg

2008-09-01

Greenhouse gas (GHG) accounting for individual cities is confounded by spatial scale and boundary effects that impact the allocation of regional material and energy flows. This paper develops a demand-centered, hybrid life-cycle-based methodology for conducting city-scale GHG inventories that incorporates (1) spatial allocation of surface and airline travel across colocated cities in larger metropolitan regions, and, (2) life-cycle assessment (LCA) to quantify the embodied energy of key urban materials--food, water, fuel, and concrete. The hybrid methodology enables cities to separately report the GHG impact associated with direct end-use of energy by cities (consistent with EPA and IPCC methods), as well as the impact of extra-boundary activities such as air travel and production of key urban materials (consistent with Scope 3 protocols recommended by the World Resources Institute). Application of this hybrid methodology to Denver, Colorado, yielded a more holistic GHG inventory that approaches a GHG footprint computation, with consistency of inclusions across spatial scale as well as convergence of city-scale per capita GHG emissions (approximately 25 mt CO2e/person/year) with state and national data. The method is shown to have significant policy impacts, and also demonstrates the utility of benchmarks in understanding energy use in various city sectors.

Methodology for Airborne Quantification of NOx fluxes over Central London and Comparison to Emission Inventories

NASA Astrophysics Data System (ADS)

Vaughan, A. R.; Lee, J. D.; Lewis, A. C.; Purvis, R.; Carslaw, D.; Misztal, P. K.; Metzger, S.; Beevers, S.; Goldstein, A. H.; Hewitt, C. N.; Shaw, M.; Karl, T.; Davison, B.

2015-12-01

The emission of pollutants is a major problem in today's cities. Emission inventories are a key tool for air quality management, with the United Kingdom's National and London Atmospheric Emission Inventories (NAEI & LAEI) being good examples. Assessing the validity of such inventoried is important. Here we report on the technical methodology of matching flux measurements of NOx over a city to inventory estimates. We used an eddy covariance technique to directly measure NOx fluxes from central London on an aircraft flown at low altitude. NOx mixing ratios were measured at 10 Hz time resolution using chemiluminescence (to measure NO) and highly specific photolytic conversion of NO2 to NO (to measure NO2). Wavelet transformation was used to calculate instantaneous fluxes along the flight track for each flight leg. The transformation allows for both frequency and time information to be extracted from a signal, where we quantify the covariance between the de-trended vertical wind and concentration to derive a flux. Comparison between the calculated fluxes and emission inventory data was achieved using a footprint model, which accounts for contributing source. Using both a backwards lagrangian model and cross-wind dispersion function, we find the footprint extent ranges from 5 to 11 Km in distance from the sample point. We then calculate a relative weighting matrix for each emission inventory within the calculated footprint. The inventories are split into their contributing source sectors with each scaled using up to date emission factors, giving a month; day and hourly scaled estimate which is then compared to the measurement.

A Review of Inventories for Diagnosing School Culture

ERIC Educational Resources Information Center

Maslowski, R.

2006-01-01

Purpose: The purpose is to provide a critical review of existing school culture inventories and to provide a bibliography of questionnaires that can be used for diagnosing school culture. Design/methodology/approach: A literature search was conducted to identify school culture questionnaires in international research indexes and educational…

European Union emission inventory report 1990-2008 : under the UNECE Convention on Long-range Transboundary Air Pollution (LRTAP)

DOT National Transportation Integrated Search

2010-07-01

This report describes the EU27 emission trends for : a number of air pollutants for the period 19902008. : An improved gap-filling methodology used in : compiling this year's EU27 emission inventory : means that for the first time a complete...

Testing for change in structural elements of forest inventories

Treesearch

Melinda Vokoun; David Wear; Robert Abt

2009-01-01

In this article we develop a methodology to test for changes in the underlying relationships between measures of forest productivity (structural elements) and site characteristics, herein referred to as structural changes, using standard forest inventories. Changes in measures of forest growing stock volume and number of trees for both...

Does Gender-Specific Differential Item Functioning Affect the Structure in Vocational Interest Inventories?

ERIC Educational Resources Information Center

Beinicke, Andrea; Pässler, Katja; Hell, Benedikt

2014-01-01

The study investigates consequences of eliminating items showing gender-specific differential item functioning (DIF) on the psychometric structure of a standard RIASEC interest inventory. Holland's hexagonal model was tested for structural invariance using a confirmatory methodological approach (confirmatory factor analysis and randomization…

GIS-based regionalized life cycle assessment: how big is small enough? Methodology and case study of electricity generation.

PubMed

Mutel, Christopher L; Pfister, Stephan; Hellweg, Stefanie

2012-01-17

We describe a new methodology for performing regionalized life cycle assessment and systematically choosing the spatial scale of regionalized impact assessment methods. We extend standard matrix-based calculations to include matrices that describe the mapping from inventory to impact assessment spatial supports. Uncertainty in inventory spatial data is modeled using a discrete spatial distribution function, which in a case study is derived from empirical data. The minimization of global spatial autocorrelation is used to choose the optimal spatial scale of impact assessment methods. We demonstrate these techniques on electricity production in the United States, using regionalized impact assessment methods for air emissions and freshwater consumption. Case study results show important differences between site-generic and regionalized calculations, and provide specific guidance for future improvements of inventory data sets and impact assessment methods.

78 FR 9987 - Call for Expert Reviewers to the U.S. Government Review of the 2013 Supplement to the 2006...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-12

... . Following an invitation from the UNFCCC to ``undertake further methodological work on wetlands, focusing on... developing additional national-level inventory methodological guidance on wetlands, including default...

Pricing end-of-life components

NASA Astrophysics Data System (ADS)

Vadde, Srikanth; Kamarthi, Sagar V.; Gupta, Surendra M.

2005-11-01

The main objective of a product recovery facility (PRF) is to disassemble end-of-life (EOL) products and sell the reclaimed components for reuse and recovered materials in second-hand markets. Variability in the inflow of EOL products and fluctuation in demand for reusable components contribute to the volatility in inventory levels. To stay profitable the PRFs ought to manage their inventory by regulating the price appropriately to minimize holding costs. This work presents two deterministic pricing models for a PRF bounded by environmental regulations. In the first model, the demand is price dependent and in the second, the demand is both price and time dependent. The models are valid for single component with no inventory replenishment sale during the selling horizon . Numerical examples are presented to illustrate the models.

An AIS-based approach to calculate atmospheric emissions from the UK fishing fleet

NASA Astrophysics Data System (ADS)

Coello, Jonathan; Williams, Ian; Hudson, Dominic A.; Kemp, Simon

2015-08-01

The fishing industry is heavily reliant on the use of fossil fuel and emits large quantities of greenhouse gases and other atmospheric pollutants. Methods used to calculate fishing vessel emissions inventories have traditionally utilised estimates of fuel efficiency per unit of catch. These methods have weaknesses because they do not easily allow temporal and geographical allocation of emissions. A large proportion of fishing and other small commercial vessels are also omitted from global shipping emissions inventories such as the International Maritime Organisation's Greenhouse Gas Studies. This paper demonstrates an activity-based methodology for the production of temporally- and spatially-resolved emissions inventories using data produced by Automatic Identification Systems (AIS). The methodology addresses the issue of how to use AIS data for fleets where not all vessels use AIS technology and how to assign engine load when vessels are towing trawling or dredging gear. The results of this are compared to a fuel-based methodology using publicly available European Commission fisheries data on fuel efficiency and annual catch. The results show relatively good agreement between the two methodologies, with an estimate of 295.7 kilotons of fuel used and 914.4 kilotons of carbon dioxide emitted between May 2012 and May 2013 using the activity-based methodology. Different methods of calculating speed using AIS data are also compared. The results indicate that using the speed data contained directly in the AIS data is preferable to calculating speed from the distance and time interval between consecutive AIS data points.

Assessment of Component-level Emission Measurements ...

EPA Pesticide Factsheets

Oil and natural gas (ONG) production facilities have the potential to emit a substantial amount of greenhouse gasses, hydrocarbons and hazardous air pollutants into the atmosphere. These emissions come from a wide variety of sources including engine exhaust, combustor gases, atmospheric venting from uncontrolled tanks and leaks. Engine exhaust, combustor gases and atmospheric tank venting are included in the initial estimation of a production facilities cumulative emissions. However, there is a large amount of uncertainty associated with magnitude and composition of leaks at these facilities. In order to understand the environmental impacts of these emissions we must first be able characterize the emission flow rate and chemical composition of these leaks/venting. A number of recent publications regarding emission flow rate measurements of components at ONG production facilities have brought into question the validity of such measurements and the sampling methodology. An accurate methodology for quantifying hydrocarbon leaks/venting is needed to support both emission inventories and environmental compliance. This interim report will summarize recent results from a small leak survey completed at ONG production facilities in Utah to characterize their flow rate and chemical composition using a suite of instruments using a high volume sampler (Bacharach Hi Flow Sampler; Bacharach, Inc.), as well as infrared (IR) cameras, a photoionization detector (PID), a fl

Construct Validation of the Physics Metacognition Inventory

NASA Astrophysics Data System (ADS)

Taasoobshirazi, Gita; Farley, John

2013-02-01

The 24-item Physics Metacognition Inventory was developed to measure physics students' metacognition for problem solving. Items were classified into eight subcomponents subsumed under two broader components: knowledge of cognition and regulation of cognition. The students' scores on the inventory were found to be reliable and related to students' physics motivation and physics grade. An exploratory factor analysis provided evidence of construct validity, revealing six components of students' metacognition when solving physics problems including: knowledge of cognition, planning, monitoring, evaluation, debugging, and information management. Although women and men differed on the components, they had equivalent overall metacognition for problem solving. The implications of these findings for future research are discussed.

Learning Transfer--Validation of the Learning Transfer System Inventory in Portugal

ERIC Educational Resources Information Center

Velada, Raquel; Caetano, Antonio; Bates, Reid; Holton, Ed

2009-01-01

Purpose: The purpose of this paper is to analyze the construct validity of learning transfer system inventory (LTSI) for use in Portugal. Furthermore, it also aims to analyze whether LTSI dimensions differ across individual variables such as gender, age, educational level and job tenure. Design/methodology/approach: After a rigorous translation…

Proceedings of Plenary Session: The LACIE Symposium

NASA Technical Reports Server (NTRS)

1978-01-01

A technology assessment of the LACIE data processing and information systems was discussed during the Large Area Crop Inventory Experiment Symposium. Crop inventories of wheat yield in the United States as well as several other nations (such as the U.S.S.R., Canada, etc.) were discussed, along with the methodology involved in acquiring this data.

Rapid forest change in the interior west presents analysis opportunities and challenges

Treesearch

John D. Shaw

2007-01-01

A recent drought has caused compositional and structural changes in Interior West forests. Recent periodic and annual inventory data provide an opportunity to analyze forest changes on a grand scale. This "natural experiment" also provides opportunities to test the effectiveness of Forest Inventory and Analysis (FIA) methodologies. It also presents some...

Standardized emissions inventory methodology for open-pit mining areas.

PubMed

Huertas, Jose I; Camacho, Dumar A; Huertas, Maria E

2011-08-01

There is still interest in a unified methodology to quantify the mass of particulate material emitted into the atmosphere by activities inherent to open-pit mining. For the case of total suspended particles (TSP), the current practice is to estimate such emissions by developing inventories based on the emission factors recommended by the USEPA for this purpose. However, there are disputes over the specific emission factors that must be used for each activity and the applicability of such factors to cases quite different to the ones under which they were obtained. There is also a need for particulate matter with an aerodynamic diameter less than 10 μm (PM(10)) emission inventories and for metrics to evaluate the emission control programs implemented by open-pit mines. To address these needs, work was carried out to establish a standardized TSP and PM(10) emission inventory methodology for open-pit mining areas. The proposed methodology was applied to seven of the eight mining companies operating in the northern part of Colombia, home to the one of the world's largest open-pit coal mining operations (∼70 Mt/year). The results obtained show that transport on unpaved roads is the mining activity that generates most of the emissions and that the total emissions may be reduced up to 72% by spraying water on the unpaved roads. Performance metrics were defined for the emission control programs implemented by mining companies. It was found that coal open-pit mines are emitting 0.726 and 0.180 kg of TSP and PM(10), respectively, per ton of coal produced. It was also found that these mines are using on average 1.148 m(2) of land per ton of coal produced per year.

Joining Inventory by Parataxonomists with DNA Barcoding of a Large Complex Tropical Conserved Wildland in Northwestern Costa Rica

PubMed Central

Janzen, Daniel H.; Hallwachs, Winnie

2011-01-01

Background The many components of conservation through biodiversity development of a large complex tropical wildland, Area de Conservacion Guanacaste (ACG), thrive on knowing what is its biodiversity and natural history. For 32 years a growing team of Costa Rican parataxonomists has conducted biodiversity inventory of ACG caterpillars, their food plants, and their parasitoids. In 2003, DNA barcoding was added to the inventory process. Methodology/Principal Findings We describe some of the salient consequences for the parataxonomists of barcoding becoming part of a field biodiversity inventory process that has centuries of tradition. From the barcoding results, the parataxonomists, as well as other downstream users, gain a more fine-scale and greater understanding of the specimens they find, rear, photograph, database and deliver. The parataxonomists also need to adjust to collecting more specimens of what appear to be the “same species” – cryptic species that cannot be distinguished by eye or even food plant alone – while having to work with the name changes and taxonomic uncertainty that comes with discovering that what looked like one species may be many. Conclusions/Significance These career parataxonomists, despite their lack of formal higher education, have proven very capable of absorbing and working around the additional complexity and requirements for accuracy and detail that are generated by adding barcoding to the field base of the ACG inventory. In the process, they have also gained a greater understanding of the fine details of phylogeny, relatedness, evolution, and species-packing in their own tropical complex ecosytems. There is no reason to view DNA barcoding as incompatible in any way with tropical biodiversity inventory as conducted by parataxonomists. Their year-round on-site inventory effort lends itself well to the sampling patterns and sample sizes needed to build a thorough barcode library. Furthermore, the biological understanding that comes with barcoding increases the scientific penetrance of biodiversity information, DNA understanding, evolution, and ecology into the communities in which the parataxonomists and their families are resident. PMID:21857894

Questioning the accuracy of greenhouse gas accounting from agricultural waste: a case study.

PubMed

Chung, Matthew L; Shilton, Andrew N; Guieysse, Benoit; Pratt, Chris

2013-01-01

The New Zealand Greenhouse Gas Inventory (the NZ Inventory) uses country-specific data to quantify CH emissions from anaerobic ponds treating dairy farm effluent (315 Gg CO equivalent [CO-e] in 2009). In this study, we used literature data to: (i) evaluate the accuracy of the NZ Inventory's parameters used to quantify these CH emissions; and (ii) determine whether the NZ Inventory's scope is capturing the full spectrum of sources with bio-CH potential entering anaerobic ponds. The research indicated that the current NZ Inventory methodology is underestimating CH emissions from anaerobic ponds across New Zealand by 264 to 603 Gg CO-e annually. Moreover, the NZ Inventory is currently not accounting for (i) manure from supplementary feed pads and stand-off pads (annual CH emissions = 207-330 Gg CO-e); (ii) waste milk (153-280 Gg CO-e); and (iii) supplementary feed waste (90-216 Gg CO-e). Annual CH emissions from anaerobic ponds on dairy farms across New Zealand are thus more likely to be 1029 to 1744 Gg CO-e, indicating that the NZ Inventory is reporting as little as 18% of actual CH emissions produced by this sector. These additional wastes are not accounted for in the methodology prescribed by the Intergovernmental Panel on Climate Change for estimating CH emissions from dairy manure. Consequently, other significant dairying nations will also probably be underestimating their waste CH emissions. Our research highlights that, if governments attempt to include country-specific emission factors in their greenhouse gas inventories, these factors must be based on an assessment of the full spectrum of sources contributing to greenhouse gas emissions within any given sector. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

An Empirical Assessment of the Communication Components Inventory

ERIC Educational Resources Information Center

Keaton, Shaughan A.; Bodie, Graham D.

2012-01-01

This article attempts to demonstrate the psychometric properties and evidence of validity for a measure recently proposed in this journal, the Communication Components Inventory (CCI). Across two studies, a total of 903 undergraduate students completed one of the two response formats--dichotomous and scaled--of the CCI and the Multiple…

LIFE CYCLE ASSESSMENT: INVENTORY GUIDELINES AND PRINCIPLES

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) is describing the process, the underlying data, and the Inherent assumptions Involved in conducting the Inventory component of a life-cycle assessment (LCA) In order to facilitate understanding by potential users. This Inventory...

Estimating down deadwood from FIA forest inventory variables in Maine

Treesearch

David C. Chojnacky; Linda S. Heath

2002-01-01

Down deadwood (DDW) is a carbon component important in the function and structure of forest ecosystems, but estimating DDW is problematic because these data are not widely available in forest inventory databases. However, DDW data were collected on USDA Forest Service Forest Inventory and Analysis (FIA) plots during Maine's 1995 inventory. This study examines ways...

Estimating down dead wood from FIA forest inventory variables in Maine

Treesearch

David C. Chojnacky; Linda S. Heath

2002-01-01

Down deadwood (DDW) is a carbon component important in the function and structure of forest ecosystems, but estimating DDW is problematic because these data are not widely available in forest inventory databases. However, DDW data were collected on USDA Forest Service Forest Inventory and Analysis (FIA) plots during Maine's 1995 inventory. This study examines ways...

Paper electrodes for bioelectrochemistry: Biosensors and biofuel cells.

PubMed

Desmet, Cloé; Marquette, Christophe A; Blum, Loïc J; Doumèche, Bastien

2016-02-15

Paper-based analytical devices (PAD) emerge in the scientific community since 2007 as low-cost, wearable and disposable devices for point-of-care diagnostic due to the widespread availability, long-time knowledge and easy manufacturing of cellulose. Rapidly, electrodes were introduced in PAD for electrochemical measurements. Together with biological components, a new generation of electrochemical biosensors was born. This review aims to take an inventory of existing electrochemical paper-based biosensors and biofuel cells and to identify, at the light of newly acquired data, suitable methodologies and crucial parameters in this field. Paper selection, electrode material, hydrophobization of cellulose, dedicated electrochemical devices and electrode configuration in biosensors and biofuel cells will be discussed. Copyright © 2015 Elsevier B.V. All rights reserved.

Documentation for Emissions of Greenhouse Gases in the United States 2008

EIA Publications

2011-01-01

The Energy Policy Act of 1992 required the U.S. Energy Information Administration (EIA) to prepare an inventory of aggregate U.S. national emissions of greenhouse gases for the period 1987-1990, with annual updates thereafter. This report documents the methodology for the seventeenth annual inventory, covering national emissions over the period 1990-2008.

Assessing Experiential Learning Styles: A Methodological Reconstruction and Validation of the Kolb Learning Style Inventory

ERIC Educational Resources Information Center

Manolis, Chris; Burns, David J.; Assudani, Rashmi; Chinta, Ravi

2013-01-01

To understand experiential learning, many have reiterated the need to be able to identify students' learning styles. Kolb's Learning Style Model is the most widely accepted learning style model and has received a substantial amount of empirical support. Kolb's Learning Style Inventory (LSI), although one of the most widely utilized instruments to…

Methodological Research on Knowledge Use and School Improvement. Volume III. Measuring Knowledge Use: A Procedural Inventory.

ERIC Educational Resources Information Center

Dunn, William N.; And Others

This volume presents in one collection a systematic inventory of research and analytic procedures appropriate for generating information on knowledge production, diffusion, and utilization, gathered by the University of Pittsburgh Program for the Study of Knowledge Use. The main concern is with those procedures that focus on the utilization of…

The Learning Transfer System Inventory (LTSI) in Ukraine: The Cross-Cultural Validation of the Instrument

ERIC Educational Resources Information Center

Yamkovenko, Bogdan V.; Holton, Elwood, III; Bates, R. A.

2007-01-01

Purpose: The purpose of this research is to expand cross-cultural research and validate the Learning Transfer System Inventory in Ukraine. The researchers seek to translate the LTSI into Ukrainian and investigate the internal structure of this translated version of the questionnaire. Design/methodology/approach: The LTSI is translated into…

Optimizing the Environmental Attitudes Inventory: Establishing a Baseline of Change in Students' Attitudes

ERIC Educational Resources Information Center

Sutton, Stephen G.; Gyuris, Emma

2015-01-01

Purpose: The purpose of this study was twofold: first, to optimize the Environmental Attitudes Inventory (EAI) and second, to establish a baseline of the difference in environmental attitudes between first and final year students, taken at the start of a university's declaration of commitment to EfS. Design/methodology/approach: The…

Institutional-Level Integration of the Learning and Study Strategies Inventory (LASSI)

ERIC Educational Resources Information Center

Kwong, Theresa; Wong, Eva; Downing, Kevin

2009-01-01

Purpose: The purpose of this paper is to exhibit the integration of learning and study strategies inventory (LASSI) with the City University of Hong Kong information systems to promote teaching and learning within the university. Design/methodology/approach: From the 2006 entry cohort, all undergraduate freshmen at City University of Hong Kong are…

A comparative analysis of two highly spatially resolved European atmospheric emission inventories

NASA Astrophysics Data System (ADS)

Ferreira, J.; Guevara, M.; Baldasano, J. M.; Tchepel, O.; Schaap, M.; Miranda, A. I.; Borrego, C.

2013-08-01

A reliable emissions inventory is highly important for air quality modelling applications, especially at regional or local scales, which require high resolutions. Consequently, higher resolution emission inventories have been developed that are suitable for regional air quality modelling. This research performs an inter-comparative analysis of different spatial disaggregation methodologies of atmospheric emission inventories. This study is based on two different European emission inventories with different spatial resolutions: 1) the EMEP (European Monitoring and Evaluation Programme) inventory and 2) an emission inventory developed by the TNO (Netherlands Organisation for Applied Scientific Research). These two emission inventories were converted into three distinct gridded emission datasets as follows: (i) the EMEP emission inventory was disaggregated by area (EMEParea) and (ii) following a more complex methodology (HERMES-DIS - High-Elective Resolution Modelling Emissions System - DISaggregation module) to understand and evaluate the influence of different disaggregation methods; and (iii) the TNO gridded emissions, which are based on different emission data sources and different disaggregation methods. A predefined common grid with a spatial resolution of 12 × 12 km2 was used to compare the three datasets spatially. The inter-comparative analysis was performed by source sector (SNAP - Selected Nomenclature for Air Pollution) with emission totals for selected pollutants. It included the computation of difference maps (to focus on the spatial variability of emission differences) and a linear regression analysis to calculate the coefficients of determination and to quantitatively measure differences. From the spatial analysis, greater differences were found for residential/commercial combustion (SNAP02), solvent use (SNAP06) and road transport (SNAP07). These findings were related to the different spatial disaggregation that was conducted by the TNO and HERMES-DIS for the first two sectors and to the distinct data sources that were used by the TNO and HERMES-DIS for road transport. Regarding the regression analysis, the greatest correlation occurred between the EMEParea and HERMES-DIS because the latter is derived from the first, which does not occur for the TNO emissions. The greatest correlations were encountered for agriculture NH3 emissions, due to the common use of the CORINE Land Cover database for disaggregation. The point source emissions (energy industries, industrial processes, industrial combustion and extraction/distribution of fossil fuels) resulted in the lowest coefficients of determination. The spatial variability of SOx differed among the emissions that were obtained from the different disaggregation methods. In conclusion, HERMES-DIS and TNO are two distinct emission inventories, both very well discretized and detailed, suitable for air quality modelling. However, the different databases and distinct disaggregation methodologies that were used certainly result in different spatial emission patterns. This fact should be considered when applying regional atmospheric chemical transport models. Future work will focus on the evaluation of air quality models performance and sensitivity to these spatial discrepancies in emission inventories. Air quality modelling will benefit from the availability of appropriate resolution, consistent and reliable emission inventories.

Analysis of a Proposal to Implement the Readiness Based Sparing Process in the Brazilian Navy

DTIC Science & Technology

2017-06-01

determine inventory levels. This research investigates whether implementing the U.S. DOD readiness-based sparing (RBS) methodology could provide the...suggested by applying the methodology first for determining reparable spares initial provisioning. 14. SUBJECT TERMS reparable, system-approach...This research investigates whether implementing the U.S. DOD readiness-based sparing (RBS) methodology could provide the Brazilian Navy with greater

Allometric scaling theory applied to FIA biomass estimation

Treesearch

David C. Chojnacky

2002-01-01

Tree biomass estimates in the Forest Inventory and Analysis (FIA) database are derived from numerous methodologies whose abundance and complexity raise questions about consistent results throughout the U.S. A new model based on allometric scaling theory ("WBE") offers simplified methodology and a theoretically sound basis for improving the reliability and...

Historic Landscape Inventory for Marietta National Cemetery

DTIC Science & Technology

2017-11-14

development context, a description of current conditions, and an analysis of changes over time to the cultural landscape. All landscape features were...Factors ..................................................................................................... xxiv 1 Methodology ...yards 0.9144 meters ERDC/CERL TR-17-41 1 1 Methodology 1.1 Background The U.S. Congress codified the National Historic Preservation Act of

Inventory of research methods for librarianship and informatics.

PubMed

Eldredge, Jonathan D

2004-01-01

This article defines and describes the rich variety of research designs found in librarianship and informatics practice. Familiarity with the range of methods and the ability to make distinctions between those specific methods can enable authors to label their research reports correctly. The author has compiled an inventory of methods from a variety of disciplines, but with attention to the relevant applications of a methodology to the field of librarianship. Each entry in the inventory includes a definition and description for the particular research method. Some entries include references to resource material and examples.

Three dimensional inventories of aircraft emissions

NASA Technical Reports Server (NTRS)

Baughcum, Steven L.; Henderson, Stephen C.; Hertel, Peter S.

1994-01-01

Three dimensional inventories of fuel burned and emissions (NO(x), CO, and hydrocarbons) have been developed on a 1 deg latitude by 1 deg longitude by 1 km altitude grid for scheduled commercial air traffic (passenger jet, cargo, and turboprop aircraft) for 1990 and projected to the year 2015. Emission scenarios have also been calculated for projected fleets of Mach 2 and Mach 2.4 high speed civil transports. The methodology and results are discussed. These emission inventories are now in use in the assessment of aircraft emissions impact by NASA.

The components of change for an annual forest inventory design

Treesearch

Francis A. Roesch

2007-01-01

The sample design of the USDA Forest Service's Forest Inventory and Analysis Program (FIA) with respect to a three-dimensional population (forest area X time) of tree attributes is formally defined and evaluated. The definitions for both the traditional components of growth, as presented by Meyer (1953, Forest Mensuration), and a discrete analog to the time...

D.B.H. and Survival Analysis: A New Methodology for Assessing Forest Inventory Mortality

Treesearch

Christopher W. Woodall; Patricia L. Grambsch; William Thomas

2005-01-01

Tree mortality has typically been assessed in Forest Inventory and Analysis (FIA) studies through summaries of mortality by location, species, and causal agents. Although these methods have historically been used for most of FIA's tree mortality analyses, they are inadequate for robust assessment of mortality trends and dynamics. To offer a new method of analyzing...

Environmental impact of producing hardwood lumber using life-cycle inventory

Treesearch

Richard D. Bowe Bergman

2008-01-01

Using sustainable building materials is gaining a significant presence in the US. This study examined hardwood lumber manufacturing using life-cycle inventory methodology. Material flow and energy use were identified for hardwood sawmills in northeastern US. A hardwood log volume conversion of 43.7% to planed dry lumber was found. Values of 608 MJ/m3 of electrical and...

Comparing alternatives for increasing sampling intensity in forest inventories

Treesearch

J. Blackard; P. Patterson

2014-01-01

Each of the U.S. Forest Service’s Forest Inventory and Analysis (FIA) regions has an occasional need to intensify the national sampling grid. A variety of methodologies exist within the various FIA regions and National Forest Systems regions for constructing plot intensifications, and there is no consensus on a national procedure The primary objectives of this paper...

On the use of genetic algorithm to optimize industrial assets lifecycle management under safety and budget constraints

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lonchampt, J.; Fessart, K.

2013-07-01

The purpose of this paper is to describe the method and tool dedicated to optimize investments planning for industrial assets. These investments may either be preventive maintenance tasks, asset enhancements or logistic investments such as spare parts purchases. The two methodological points to investigate in such an issue are: 1. The measure of the profitability of a portfolio of investments 2. The selection and planning of an optimal set of investments 3. The measure of the risk of a portfolio of investments The measure of the profitability of a set of investments in the IPOP tool is synthesised in themore » Net Present Value indicator. The NPV is the sum of the differences of discounted cash flows (direct costs, forced outages...) between the situations with and without a given investment. These cash flows are calculated through a pseudo-Markov reliability model representing independently the components of the industrial asset and the spare parts inventories. The component model has been widely discussed over the years but the spare part model is a new one based on some approximations that will be discussed. This model, referred as the NPV function, takes for input an investments portfolio and gives its NPV. The second issue is to optimize the NPV. If all investments were independent, this optimization would be an easy calculation, unfortunately there are two sources of dependency. The first one is introduced by the spare part model, as if components are indeed independent in their reliability model, the fact that several components use the same inventory induces a dependency. The second dependency comes from economic, technical or logistic constraints, such as a global maintenance budget limit or a safety requirement limiting the residual risk of failure of a component or group of component, making the aggregation of individual optimum not necessary feasible. The algorithm used to solve such a difficult optimization problem is a genetic algorithm. After a description of the features of the software a test case is presented showing the influence of the optimization algorithm parameters on its efficiency to find an optimal investments planning. (authors)« less

From Models to Measurements: Comparing Downed Dead Wood Carbon Stock Estimates in the U.S. Forest Inventory

Treesearch

Grant M. Domke; Christopher W. Woodall; Brian F. Walters; James E. Smith

2013-01-01

The inventory and monitoring of coarse woody debris (CWD) carbon (C) stocks is an essential component of any comprehensive National Greenhouse Gas Inventory (NGHGI). Due to the expense and difficulty associated with conducting field inventories of CWD pools, CWD C stocks are often modeled as a function of more commonly measured stand attributes such as live tree C...

Clarifying the Content Coverage of Differing Psychopathy Inventories through Reference to the Triarchic Psychopathy Measure

PubMed Central

Drislane, Laura E.; Patrick, Christopher J.; Arsal, Güler

2014-01-01

The Triarchic Model of psychopathy (Patrick, Fowles, and Krueger, 2009) was formulated as an integrative framework for reconciling differing conceptions of psychopathy. The model characterizes psychopathy in terms of three distinguishable phenotypic components: boldness, meanness, and disinhibition. Data from a large mixed-gender undergraduate sample (N = 618) were used to examine relations of several of the best-known measures for assessing psychopathic traits with scores on the Triarchic Psychopathy Measure (TriPM), an inventory developed to operationalize the Triarchic Model through separate facet scales. Analyses revealed that established inventories of psychopathy index components of the model as indexed by the TriPM to varying degrees. While each inventory provided effective coverage of meanness and disinhibition components, instruments differed in their representation of boldness. Current results demonstrate the heuristic value of the Triarchic Model for delineating commonalities and differences among alternative measures of psychopathy, and provide support for the utility of the Triarchic Model as a framework for reconciling alternative conceptions of psychopathy. PMID:24320762

Decreasing inventory of a cement factory roller mill parts using reliability centered maintenance method

NASA Astrophysics Data System (ADS)

Witantyo; Rindiyah, Anita

2018-03-01

According to data from maintenance planning and control, it was obtained that highest inventory value is non-routine components. Maintenance components are components which procured based on maintenance activities. The problem happens because there is no synchronization between maintenance activities and the components required. Reliability Centered Maintenance method is used to overcome the problem by reevaluating maintenance activities required components. The case chosen is roller mill system because it has the highest unscheduled downtime record. Components required for each maintenance activities will be determined by its failure distribution, so the number of components needed could be predicted. Moreover, those components will be reclassified from routine component to be non-routine component, so the procurement could be carried out regularly. Based on the conducted analysis, failure happens in almost every maintenance task are classified to become scheduled on condition task, scheduled discard task, schedule restoration task and no schedule maintenance. From 87 used components for maintenance activities are evaluated and there 19 components that experience reclassification from non-routine components to routine components. Then the reliability and need of those components were calculated for one-year operation period. Based on this invention, it is suggested to change all of the components in overhaul activity to increase the reliability of roller mill system. Besides, the inventory system should follow maintenance schedule and the number of required components in maintenance activity so the value of procurement will be decreased and the reliability system will increase.

Construct Validation of the Physics Metacognition Inventory

ERIC Educational Resources Information Center

Taasoobshirazi, Gita; Farley, John

2013-01-01

The 24-item Physics Metacognition Inventory was developed to measure physics students' metacognition for problem solving. Items were classified into eight subcomponents subsumed under two broader components: knowledge of cognition and regulation of cognition. The students' scores on the inventory were found to be reliable and related to students'…

AIM-Monitoring: a component of the BLM assessment, inventory, and monitoring strategy

USDA-ARS?s Scientific Manuscript database

The “BLM Assessment, Inventory, and Monitoring Strategy for Integrated Renewable Resources Management” (AIM Strategy) was completed in 2011 in response to a request from the Office of Management and Budget. The strategy describes an approach for integrated, cross-program assessment, inventory, and m...

Updating Indiana Annual Forest Inventory and Analysis Plot Data Using Eastern Broadleaf Forest Diameter Growth Models

Treesearch

Veronica C. Lessard

2001-01-01

The Forest Inventory and Analysis (FIA) program of the North Central Research Station (NCRS), USDA Forest Service, has developed nonlinear, individual-tree, distance-independent annual diameter growth models. The models are calibrated for species groups and formulated as the product of an average diameter growth component and a modifier component. The regional models...

New methodology for modeling annual-aircraft emissions at airports

DOE Office of Scientific and Technical Information (OSTI.GOV)

Woodmansey, B.G.; Patterson, J.G.

An as-accurate-as-possible estimation of total-aircraft emissions are an essential component of any environmental-impact assessment done for proposed expansions at major airports. To determine the amount of emissions generated by aircraft using present models it is necessary to know the emission characteristics of all engines that are on all planes using the airport. However, the published data base does not cover all engine types and, therefore, a new methodology is needed to assist in estimating annual emissions from aircraft at airports. Linear regression equations relating quantity of emissions to aircraft weight using a known-fleet mix are developed in this paper. Total-annualmore » emissions for CO, NO[sub x], NMHC, SO[sub x], CO[sub 2], and N[sub 2]O are tabulated for Toronto's international airport for 1990. The regression equations are statistically significant for all emissions except for NMHC from large jets and NO[sub x] and NMHC for piston-engine aircraft. This regression model is a relatively simple, fast, and inexpensive method of obtaining an annual-emission inventory for an airport.« less

An open repository of earthquake-triggered ground-failure inventories

USGS Publications Warehouse

Schmitt, Robert G.; Tanyas, Hakan; Nowicki Jessee, M. Anna; Zhu, Jing; Biegel, Katherine M.; Allstadt, Kate E.; Jibson, Randall W.; Thompson, Eric M.; van Westen, Cees J.; Sato, Hiroshi P.; Wald, David J.; Godt, Jonathan W.; Gorum, Tolga; Xu, Chong; Rathje, Ellen M.; Knudsen, Keith L.

2017-12-20

Earthquake-triggered ground failure, such as landsliding and liquefaction, can contribute significantly to losses, but our current ability to accurately include them in earthquake-hazard analyses is limited. The development of robust and widely applicable models requires access to numerous inventories of ground failures triggered by earthquakes that span a broad range of terrains, shaking characteristics, and climates. We present an openly accessible, centralized earthquake-triggered groundfailure inventory repository in the form of a ScienceBase Community to provide open access to these data with the goal of accelerating research progress. The ScienceBase Community hosts digital inventories created by both U.S. Geological Survey (USGS) and non-USGS authors. We present the original digital inventory files (when available) as well as an integrated database with uniform attributes. We also summarize the mapping methodology and level of completeness as reported by the original author(s) for each inventory. This document describes the steps taken to collect, process, and compile the inventories and the process for adding additional ground-failure inventories to the ScienceBase Community in the future.

Examining the Factor Structure and Predictive Ability of the German-Version of the Learning Transfer Systems Inventory

ERIC Educational Resources Information Center

Bates, Reid; Kauffeld, Simone; Holton, Elwood F., III

2007-01-01

Purpose: The purpose of this research is to examine the construct and predictive ability of a German version of the Learning Transfer Systems Inventory (GLTSI), an instrument designed to assess a constellation of 16 factors known to influence the transfer of training in work settings. Design/methodology/approach: The survey data for this study was…

Historic Properties Report: Kansas Army Ammunition Plant, Parsons, Kansas

DTIC Science & Technology

1984-11-01

methodology; Chapter 2 presents an architectural, historical, and technological overview of the installation and its properties; and Chapter 3 identifies ...historic properties were identified by this source. Army records used for the field inventory included current Real Property Inventory (RPI) printouts that...text as appropriate. The objectives of the overview were to i) establish the periods of major construction at the installation, 2) identify important

VT0005 In Action: National Forest Biomass Inventory Using Airborne Lidar Sampling

NASA Astrophysics Data System (ADS)

Saatchi, S. S.; Xu, L.; Meyer, V.; Ferraz, A.; Yang, Y.; Shapiro, A.; Bastin, J. F.

2016-12-01

Tropical countries are required to produce robust and verifiable estimates of forest carbon stocks for successful implementation of climate change mitigation. Lack of systematic national inventory data due to access, cost, and infrastructure, has impacted the capacity of most tropical countries to accurately report the GHG emissions to the international community. Here, we report on the development of the aboveground forest carbon (AGC) map of Democratic Republic of Congo (DRC) by using the VCS (Verified Carbon Standard) methodology developed by Sassan Saatchi (VT0005) using high-resolution airborne LiDAR samples. The methodology provides the distribution of the carbon stocks in aboveground live trees of more than 150 million ha of forests at 1-ha spatial resolution in DRC using more than 430, 000 ha of systematic random airborne Lidar inventory samples of forest structure. We developed a LIDAR aboveground biomass allometry using more than 100 1-ha plots across forest types and power-law model with LIDAR height metrics and average landscape scale wood density. The methodology provided estimates of forest biomass over the entire country using two approaches: 1) mean, variance, and total carbon estimates for each forest type present in DRC using inventory statistical techniques, and 2) a wall-to-wall map of the forest biomass extrapolated using satellite radar (ALOS PALSAR), surface topography from SRTM, and spectral information from Landsat (TM) and machine learning algorithms. We present the methodology, the estimates of carbon stocks and the spatial uncertainty over the entire country. AcknowledgementsThe theoretical research was carried out partially at the Jet Propulsion Laboratory, California Institute of Technology, under a contract with the National Aeronautics and Space Administration, and the design and implementation in the Democratic Republic of Congo was carried out at the Institute of Environment and Sustainability at University of California Los Angeles through the support of the International Climate Initiative of the German Ministry of Environment, Conservation and Nuclear Security, and the KFW Development Bank.

Exploration of Korean Students' Scientific Imagination Using the Scientific Imagination Inventory

ERIC Educational Resources Information Center

Mun, Jiyeong; Mun, Kongju; Kim, Sung-Won

2015-01-01

This article reports on the study of the components of scientific imagination and describes the scales used to measure scientific imagination in Korean elementary and secondary students. In this study, we developed an inventory, which we call the Scientific Imagination Inventory (SII), in order to examine aspects of scientific imagination. We…

Acoustic Typology of Vowel Inventories and Dispersion Theory: Insights from a Large Cross-Linguistic Corpus

ERIC Educational Resources Information Center

Becker-Kristal, Roy

2010-01-01

This dissertation examines the relationship between the structural, phonemic properties of vowel inventories and their acoustic phonetic realization, with particular focus on the adequacy of Dispersion Theory, which maintains that inventories are structured so as to maximize perceptual contrast between their component vowels. In order to assess…

Process mining is an underutilized clinical research tool in transfusion medicine.

PubMed

Quinn, Jason G; Conrad, David M; Cheng, Calvino K

2017-03-01

To understand inventory performance, transfusion services commonly use key performance indicators (KPIs) as summary descriptors of inventory efficiency that are graphed, trended, and used to benchmark institutions. Here, we summarize current limitations in KPI-based evaluation of blood bank inventory efficiency and propose process mining as an ideal methodology for application to inventory management research to improve inventory flows and performance. The transit of a blood product from inventory receipt to final disposition is complex and relates to many internal and external influences, and KPIs may be inadequate to fully understand the complexity of the blood supply chain and how units interact with its processes. Process mining lends itself well to analysis of blood bank inventories, and modern laboratory information systems can track nearly all of the complex processes that occur in the blood bank. Process mining is an analytical tool already used in other industries and can be applied to blood bank inventory management and research through laboratory information systems data using commercial applications. Although the current understanding of real blood bank inventories is value-centric through KPIs, it potentially can be understood from a process-centric lens using process mining. © 2017 AABB.

Inventory of research methods for librarianship and informatics

PubMed Central

Eldredge, Jonathan D.

2004-01-01

This article defines and describes the rich variety of research designs found in librarianship and informatics practice. Familiarity with the range of methods and the ability to make distinctions between those specific methods can enable authors to label their research reports correctly. The author has compiled an inventory of methods from a variety of disciplines, but with attention to the relevant applications of a methodology to the field of librarianship. Each entry in the inventory includes a definition and description for the particular research method. Some entries include references to resource material and examples. PMID:14762467

Psychometric characteristics of the Mobility Inventory in a longitudinal study of anxiety disorders: Replicating and exploring a three component solution

PubMed Central

Rodriguez, Benjamin F.; Pagano, Maria E.; Keller, Martin B.

2008-01-01

Psychometric characteristics of the Mobility Inventory (MI) were examined in 216 outpatients diagnosed with panic disorder with agoraphobia participating in a longitudinal study of anxiety disorders. An exploratory principal components analysis replicated a three-component solution for the MI reported in prior studies, with components corresponding to avoidance of public spaces, avoidance of enclosed spaces, and avoidance of open spaces. Correlational analyses suggested that the components tap unique but related areas of avoidance that were remarkably stable across periods of 1,3, and 5 years between administrations. Implications of these results for future studies of agoraphobia are discussed. PMID:17079112

Biodiversity impact assessment (BIA+) - methodological framework for screening biodiversity.

PubMed

Winter, Lisa; Pflugmacher, Stephan; Berger, Markus; Finkbeiner, Matthias

2018-03-01

For the past 20 years, the life cycle assessment (LCA) community has sought to integrate impacts on biodiversity into the LCA framework. However, existing impact assessment methods still fail to do so comprehensively because they quantify only a few impacts related to specific species and regions. This paper proposes a methodological framework that will allow LCA practitioners to assess currently missing impacts on biodiversity on a global scale. Building on existing models that seek to quantify the impacts of human activities on biodiversity, the herein proposed methodological framework consists of 2 components: a habitat factor for 14 major habitat types and the impact on the biodiversity status in those major habitat types. The habitat factor is calculated by means of indicators that characterize each habitat. The biodiversity status depends on parameters from impact categories. The impact functions, relating these different parameters to a given response in the biodiversity status, rely on expert judgments. To ensure the applicability for LCA practitioners, the components of the framework can be regionalized on a country scale for which LCA inventory data is more readily available. The weighting factors for the 14 major habitat types range from 0.63 to 1.82. By means of area weighting of the major habitat types in a country, country-specific weighting factors are calculated. In order to demonstrate the main part of the framework, examples of impact functions are given for the categories "freshwater eutrophication" and "freshwater ecotoxicity" in 1 major habitat type. The results confirm suitability of the methodological framework. The major advantages are the framework's user-friendliness, given that data can be used from LCA databases directly, and the complete inclusion of all levels of biodiversity (genetic, species, and ecosystem). It is applicable for the whole world and a wide range of impact categories. Integr Environ Assess Manag 2018;14:282-297. © 2017 SETAC. © 2017 SETAC.

Empowerment of Cancer Survivors Through Information Technology: An Integrative Review.

PubMed

Groen, Wim G; Kuijpers, Wilma; Oldenburg, Hester Sa; Wouters, Michel Wjm; Aaronson, Neil K; van Harten, Wim H

2015-11-27

Patient empowerment may be an effective approach to strengthen the role of cancer survivors and to reduce the burden on health care. However, it is not well conceptualized, notably in oncology. Furthermore, it is unclear to what extent information technology (IT) services can contribute to empowerment of cancer survivors. We aim to define the conceptual components of patient empowerment of chronic disease patients, especially cancer survivors, and to explore the contribution of existing and new IT services to promote empowerment. Electronic databases were searched to identify theoretical and empirical articles regarding empowerment. We extracted and synthesized conceptual components of patient empowerment (ie, attributes, antecedents, and consequences) according to the integrated review methodology. We identified recent IT services for cancer survivors by examining systematic reviews and a proposed inventory of new services, and we related their features and effects to the identified components of empowerment. Based on 26 articles, we identified five main attributes of patient empowerment: (1) being autonomous and respected, (2) having knowledge, (3) having psychosocial and behavioral skills, (4) perceiving support from community, family, and friends, and (5) perceiving oneself to be useful. The latter two were specific for the cancer setting. Systematic reviews of IT services and our additional inventory helped us identify five main categories: (1) educational services, including electronic survivorship care plan services, (2) patient-to-patient services, (3) electronic patient-reported outcome (ePRO) services, (4) multicomponent services, and (5) portal services. Potential impact on empowerment included knowledge enhancement and, to a lesser extent, enhancing autonomy and skills. Newly developed services offer promising and exciting opportunities to empower cancer survivors, for instance, by providing tailored advice for supportive or follow-up care based on patients' input. We identified five main components of empowerment and showed that IT services may especially contribute to empowerment by providing knowledge. The components of empowerment could be used to develop IT services for cancer survivors. It is important to take into account patients' needs, follow up on these needs, and create a service that is attractive and easy to use.

Empowerment of Cancer Survivors Through Information Technology: An Integrative Review

PubMed Central

Groen, Wim G; Kuijpers, Wilma; Oldenburg, Hester SA; Wouters, Michel WJM; Aaronson, Neil K

2015-01-01

Background Patient empowerment may be an effective approach to strengthen the role of cancer survivors and to reduce the burden on health care. However, it is not well conceptualized, notably in oncology. Furthermore, it is unclear to what extent information technology (IT) services can contribute to empowerment of cancer survivors. Objective We aim to define the conceptual components of patient empowerment of chronic disease patients, especially cancer survivors, and to explore the contribution of existing and new IT services to promote empowerment. Methods Electronic databases were searched to identify theoretical and empirical articles regarding empowerment. We extracted and synthesized conceptual components of patient empowerment (ie, attributes, antecedents, and consequences) according to the integrated review methodology. We identified recent IT services for cancer survivors by examining systematic reviews and a proposed inventory of new services, and we related their features and effects to the identified components of empowerment. Results Based on 26 articles, we identified five main attributes of patient empowerment: (1) being autonomous and respected, (2) having knowledge, (3) having psychosocial and behavioral skills, (4) perceiving support from community, family, and friends, and (5) perceiving oneself to be useful. The latter two were specific for the cancer setting. Systematic reviews of IT services and our additional inventory helped us identify five main categories: (1) educational services, including electronic survivorship care plan services, (2) patient-to-patient services, (3) electronic patient-reported outcome (ePRO) services, (4) multicomponent services, and (5) portal services. Potential impact on empowerment included knowledge enhancement and, to a lesser extent, enhancing autonomy and skills. Newly developed services offer promising and exciting opportunities to empower cancer survivors, for instance, by providing tailored advice for supportive or follow-up care based on patients' input. Conclusions We identified five main components of empowerment and showed that IT services may especially contribute to empowerment by providing knowledge. The components of empowerment could be used to develop IT services for cancer survivors. It is important to take into account patients’ needs, follow up on these needs, and create a service that is attractive and easy to use. PMID:26614438

Measuring Students' Motivation: Validity Evidence for the MUSIC Model of Academic Motivation Inventory

ERIC Educational Resources Information Center

Jones, Brett D.; Skaggs, Gary

2016-01-01

This study provides validity evidence for the MUSIC Model of Academic Motivation Inventory (MUSIC Inventory; Jones, 2012), which measures college students' beliefs related to the five components of the MUSIC Model of Motivation (MUSIC model; Jones, 2009). The MUSIC model is a conceptual framework for five categories of teaching strategies (i.e.,…

Field efficiency and bias of snag inventory methods

Treesearch

Robert S. Kenning; Mark J. Ducey; John C. Brissette; Jeffery H. Gove

2005-01-01

Snags and cavity trees are important components of forests, but can be difficult to inventory precisely and are not always included in inventories because of limited resources. We tested the application of N-tree distance sampling as a time-saving snag sampling method and compared N-tree distance sampling to fixed-area sampling and modified horizontal line sampling in...

Development and application of a mechanistic model to estimate emission of nitrous oxide from UK agriculture

NASA Astrophysics Data System (ADS)

Brown, L.; Syed, B.; Jarvis, S. C.; Sneath, R. W.; Phillips, V. R.; Goulding, K. W. T.; Li, C.

A mechanistic model of N 2O emission from agricultural soil (DeNitrification-DeComposition—DNDC) was modified for application to the UK, and was used as the basis of an inventory of N 2O emission from UK agriculture in 1990. UK-specific input data were added to DNDC's database and the ability to simulate daily C and N inputs from grazing animals and applied animal waste was added to the model. The UK version of the model, UK-DNDC, simulated emissions from 18 different crop types on the 3 areally dominant soils in each county. Validation of the model at the field scale showed that predictions matched observations well. Emission factors for the inventory were calculated from estimates of N 2O emission from UK-DNDC, in order to maintain direct comparability with the IPCC approach. These, along with activity data, were included in a transparent spreadsheet format. Using UK-DNDC, the estimate of N 2O-N emission from UK current agricultural practice in 1990 was 50.9 Gg. This total comprised 31.7 Gg from the soil sector, 5.9 Gg from animals and 13.2 Gg from the indirect sector. The range of this estimate (using the range of soil organic C for each soil used) was 30.5-62.5 Gg N. Estimates of emissions in each sector were compared to those calculated using the IPCC default methodology. Emissions from the soil and indirect sectors were smaller with the UK-DNDC approach than with the IPCC methodology, while emissions from the animal sector were larger. The model runs suggested a relatively large emission from agricultural land that was not attributable to current agricultural practices (33.8 Gg in total, 27.4 Gg from the soil sector). This 'background' component is partly the result of historical agricultural land use. It is not normally included in inventories of emission, but would increase the total emission of N 2O-N from agricultural land in 1990 to 78.3 Gg.

Making Supply Chains Resilient to Floods Using a Bayesian Network

NASA Astrophysics Data System (ADS)

Haraguchi, M.

2015-12-01

Natural hazards distress the global economy by disrupting the interconnected supply chain networks. Manufacturing companies have created cost-efficient supply chains by reducing inventories, streamlining logistics and limiting the number of suppliers. As a result, today's supply chains are profoundly susceptible to systemic risks. In Thailand, for example, the GDP growth rate declined by 76 % in 2011 due to prolonged flooding. Thailand incurred economic damage including the loss of USD 46.5 billion, approximately 70% of which was caused by major supply chain disruptions in the manufacturing sector. Similar problems occurred after the Great East Japan Earthquake and Tsunami in 2011, the Mississippi River floods and droughts during 2011 - 2013, and Hurricane Sandy in 2012. This study proposes a methodology for modeling supply chain disruptions using a Bayesian network analysis (BNA) to estimate expected values of countermeasures of floods, such as inventory management, supplier management and hard infrastructure management. We first performed a spatio-temporal correlation analysis between floods and extreme precipitation data for the last 100 years at a global scale. Then we used a BNA to create synthetic networks that include variables associated with the magnitude and duration of floods, major components of supply chains and market demands. We also included decision variables of countermeasures that would mitigate potential losses caused by supply chain disruptions. Finally, we conducted a cost-benefit analysis by estimating the expected values of these potential countermeasures while conducting a sensitivity analysis. The methodology was applied to supply chain disruptions caused by the 2011 Thailand floods. Our study demonstrates desirable typical data requirements for the analysis, such as anonymized supplier network data (i.e. critical dependencies, vulnerability information of suppliers) and sourcing data(i.e. locations of suppliers, and production rates and volume), and data from previous experiences (i.e. companies' risk mitigation strategy decisions).

Warehouses information system design and development

NASA Astrophysics Data System (ADS)

Darajatun, R. A.; Sukanta

2017-12-01

Materials/goods handling industry is fundamental for companies to ensure the smooth running of their warehouses. Efficiency and organization within every aspect of the business is essential in order to gain a competitive advantage. The purpose of this research is design and development of Kanban of inventory storage and delivery system. Application aims to facilitate inventory stock checks to be more efficient and effective. Users easily input finished goods from production department, warehouse, customer, and also suppliers. Master data designed as complete as possible to be prepared applications used in a variety of process logistic warehouse variations. The author uses Java programming language to develop the application, which is used for building Java Web applications, while the database used is MySQL. System development methodology that I use is the Waterfall methodology. Waterfall methodology has several stages of the Analysis, System Design, Implementation, Integration, Operation and Maintenance. In the process of collecting data the author uses the method of observation, interviews, and literature.

Inventory-driven costs.

PubMed

Callioni, Gianpaolo; de Montgros, Xavier; Slagmulder, Regine; Van Wassenhove, Luk N; Wright, Linda

2005-03-01

In the 199os, Hewlett-Packard's PC business was struggling to turn a dollar, despite the company's success in winning market share. By 1997, margins on its PCs were as thin as a silicon wafer, and some product lines hadn't turned a profit since 1993. The problem had everything to do with the PC industry's notoriously short product cycles and brutal product and component price deflation. A common rule of thumb was that the value of a fully assembled PC decreased 1% a week. In such an environment, inventory costs become critical. But not just the inventory costs companies traditionally track, HP found, after a thorough review of the problem. The standard "holding cost of inventory"--the capital and physical costs of inventory--accounted for only about 10% of HP's inventory costs. The greater risks, it turned out, resided in four other, essentially hidden costs, which stemmed from mismatches between demand and supply: Component devaluation costs for components still held in production; Price protection costs incurred when product prices drop on the goods distributors still have on their shelves; Product return costs that have to be absorbed when distributors return and receive refunds on overstock items, and; Obsolescence costs for products still unsold when new models are introduced. By developing metrics to track those costs in a consistent way throughout the PC division, HP has found it can manage its supply chains with much more sophistication. Gone are the days of across-the-board measures such as,"Everyone must cut inventories by 20% by the end of the year," which usually resulted in a flurry of cookie-cutter lean production and just-in-time initiatives. Now, each product group is free to choose the supply chain configuration that best suits its needs. Other companies can follow HP's example.

Product environmental footprint in policy and market decisions: Applicability and impact assessment.

PubMed

Lehmann, Annekatrin; Bach, Vanessa; Finkbeiner, Matthias

2015-07-01

In April 2013, the European Commission published the Product and Organisation Environmental Footprint (PEF/OEF) methodology--a life cycle-based multicriteria measure of the environmental performance of products, services, and organizations. With its approach of "comparability over flexibility," the PEF/OEF methodology aims at harmonizing existing methods, while decreasing the flexibility provided by the International Organization for Standardization (ISO) standards regarding methodological choices. Currently, a 3-y pilot phase is running, aiming at testing the methodology and developing product category and organization sector rules (PEFCR/OEFSR). Although a harmonized method is in theory a good idea, the PEF/OEF methodology presents challenges, including a risk of confusion and limitations in applicability to practice. The paper discusses the main differences between the PEF and ISO methodologies and highlights challenges regarding PEF applicability, with a focus on impact assessment. Some methodological aspects of the PEF and PEFCR Guides are found to contradict the ISO 14044 (2006) and ISO 14025 (2006). Others, such as prohibition of inventory cutoffs, are impractical. The evaluation of the impact assessment methods proposed in the PEF/OEF Guide showed that the predefined methods for water consumption, land use, and abiotic resources are not adequate because of modeling artefacts, missing inventory data, or incomplete characterization factors. However, the methods for global warming and ozone depletion perform very well. The results of this study are relevant for the PEF (and OEF) pilot phase, which aims at testing the PEF (OEF) methodology (and potentially adapting it) as well as addressing challenges and coping with them. © 2015 SETAC.

Automatic water inventory, collecting, and dispensing unit

NASA Technical Reports Server (NTRS)

Hall, J. B., Jr.; Williams, E. F.

1972-01-01

Two cylindrical tanks with piston bladders and associated components for automatic filling and emptying use liquid inventory readout devices in control of water flow. Unit provides for adaptive water collection, storage, and dispensation in weightlessness environment.

Sampling protocol, estimation, and analysis procedures for the down woody materials indicator of the FIA program

Treesearch

Christopher W. Woodall; Vicente J. Monleon

2008-01-01

The USDA Forest Service's Forest Inventory and Analysis program conducts an inventory of forests of the United States including down woody materials (DWM). In this report we provide the rationale and context for a national inventory of DWM, describe the components sampled, discuss the sampling protocol used and corresponding estimation procedures, and provide...

Development of the B.C. Vegetation Inventory Training Program

Treesearch

Norm Shaw

2000-01-01

During the development of the B.C. Vegetation Resources Inventory, it was recognized that success would depend on the ability to implement and actually carry out the design. It was accepted that a training program would be an integral component of the inventory process. A formal process tied to basic principles of committee structure and recognition of work well done...

Inventory of nanotechnology companies in Mexico

NASA Astrophysics Data System (ADS)

Appelbaum, Richard; Zayago Lau, Edgar; Foladori, Guillermo; Parker, Rachel; Vazquez, Laura Liliana Villa; Belmont, Eduardo Robles; Figueroa, Edgar Ramón Arteaga

2016-02-01

This study presents an inventory of 139 nanotechnology companies in Mexico, identifying their geographic distribution, economic sector classification, and position in the nanotechnology value chain. We find that the principal economic sector of nanotechnology-engaged firms involves the manufacture of chemical products, which largely serve as means of production (primary or intermediate materials; instruments and equipment) for industrial processes. The methodology used in this analysis could be replicated in other countries without major modifications.

Evaluation and recommendations concerning the visual resource inventory and evaluation systems used within the forest service and the bureau of land management

Treesearch

Blaise George Grden

1979-01-01

This paper is an investigation of the Visual Management System (VMS) and the Visual Resource Inventory and Evaluation Process (VRIEP). Questionnaires were developed and sent to persons who were experienced with VMS and/or VRIEP. VMS has been found easier to under-stand and apply than VRIEP. The methodology of VRIEP has been found to he a more complete approach than...

Estimated inventory of radionuclides in former Soviet Union naval reactors dumped in the Kara Sea

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mount, M.E.; Sheaffer, M.K.; Abbott, D.T.

1993-07-01

Radionuclide inventories have been estimated for the reactor cores, reactor components, and primary system corrosion products in the former Soviet Union naval reactors dumped at the Abrosimov Inlet, Tsivolka Inlet, Stepovoy Inlet, Techeniye Inlet, and Novaya Zemlya Depression sites in the Kara Sea between 1965 and 1988. For the time of disposal, the inventories are estimated at 69 to 111 kCi of actinides plus daughters and 3,053 to 7,472 kCi of fission products in the reactor cores, 917 to 1,127 kCi of activation products in the reactor components, and 1.4 to 1.6 kCi of activation products in the primary systemmore » corrosion products. At the present time, the inventories are estimated to have decreased to 23 to 38 kCi of actinides plus daughters and 674 to 708 kCi of fission products in the reactor cores, 124 to 126 kCi of activation products in the reactor components, and 0.16 to 0.17 kCi of activation products in the primary system corrosion products. Twenty years from now, the inventories are projected to be 11 to 18 kCi of actinides plus daughters and 415 to 437 kCi of fission products in the reactor cores, 63.5 to 64 kCi of activation products in the reactor components, and 0.014 to 0.015 kCi of activation products in the primary system corrosion products. All actinide activities are estimated to be within a factor of two.« less

Rapid classification of landsat TM imagery for phase 1 stratification using the automated NDVI threshold supervised classification (ANTSC) methodology

Treesearch

William H. Cooke; Dennis M. Jacobs

2002-01-01

FIA annual inventories require rapid updating of pixel-based Phase 1 estimates. Scientists at the Southern Research Station are developing an automated methodology that uses a Normalized Difference Vegetation Index (NDVI) for identifying and eliminating problem FIA plots from the analysis. Problem plots are those that have questionable land useiland cover information....

From Models to Measurements: Comparing Downed Dead Wood Carbon Stock Estimates in the U.S. Forest Inventory

PubMed Central

Domke, Grant M.; Woodall, Christopher W.; Walters, Brian F.; Smith, James E.

2013-01-01

The inventory and monitoring of coarse woody debris (CWD) carbon (C) stocks is an essential component of any comprehensive National Greenhouse Gas Inventory (NGHGI). Due to the expense and difficulty associated with conducting field inventories of CWD pools, CWD C stocks are often modeled as a function of more commonly measured stand attributes such as live tree C density. In order to assess potential benefits of adopting a field-based inventory of CWD C stocks in lieu of the current model-based approach, a national inventory of downed dead wood C across the U.S. was compared to estimates calculated from models associated with the U.S.’s NGHGI and used in the USDA Forest Service, Forest Inventory and Analysis program. The model-based population estimate of C stocks for CWD (i.e., pieces and slash piles) in the conterminous U.S. was 9 percent (145.1 Tg) greater than the field-based estimate. The relatively small absolute difference was driven by contrasting results for each CWD component. The model-based population estimate of C stocks from CWD pieces was 17 percent (230.3 Tg) greater than the field-based estimate, while the model-based estimate of C stocks from CWD slash piles was 27 percent (85.2 Tg) smaller than the field-based estimate. In general, models overestimated the C density per-unit-area from slash piles early in stand development and underestimated the C density from CWD pieces in young stands. This resulted in significant differences in CWD C stocks by region and ownership. The disparity in estimates across spatial scales illustrates the complexity in estimating CWD C in a NGHGI. Based on the results of this study, it is suggested that the U.S. adopt field-based estimates of CWD C stocks as a component of its NGHGI to both reduce the uncertainty within the inventory and improve the sensitivity to potential management and climate change events. PMID:23544112

From models to measurements: comparing downed dead wood carbon stock estimates in the U.S. forest inventory.

PubMed

Domke, Grant M; Woodall, Christopher W; Walters, Brian F; Smith, James E

2013-01-01

The inventory and monitoring of coarse woody debris (CWD) carbon (C) stocks is an essential component of any comprehensive National Greenhouse Gas Inventory (NGHGI). Due to the expense and difficulty associated with conducting field inventories of CWD pools, CWD C stocks are often modeled as a function of more commonly measured stand attributes such as live tree C density. In order to assess potential benefits of adopting a field-based inventory of CWD C stocks in lieu of the current model-based approach, a national inventory of downed dead wood C across the U.S. was compared to estimates calculated from models associated with the U.S.'s NGHGI and used in the USDA Forest Service, Forest Inventory and Analysis program. The model-based population estimate of C stocks for CWD (i.e., pieces and slash piles) in the conterminous U.S. was 9 percent (145.1 Tg) greater than the field-based estimate. The relatively small absolute difference was driven by contrasting results for each CWD component. The model-based population estimate of C stocks from CWD pieces was 17 percent (230.3 Tg) greater than the field-based estimate, while the model-based estimate of C stocks from CWD slash piles was 27 percent (85.2 Tg) smaller than the field-based estimate. In general, models overestimated the C density per-unit-area from slash piles early in stand development and underestimated the C density from CWD pieces in young stands. This resulted in significant differences in CWD C stocks by region and ownership. The disparity in estimates across spatial scales illustrates the complexity in estimating CWD C in a NGHGI. Based on the results of this study, it is suggested that the U.S. adopt field-based estimates of CWD C stocks as a component of its NGHGI to both reduce the uncertainty within the inventory and improve the sensitivity to potential management and climate change events.

Practical guide: Tools and methodologies for an oil and gas industry emission inventory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thompson, C.C.; Killian, T.L.

1996-12-31

During the preparation of Title V Permit applications, the quantification and speciation of emission sources from oil and gas facilities were reevaluated to determine the {open_quotes}potential-to-emit.{close_quotes} The existing emissions were primarily based on EPA emission factors such as AP-42, for tanks, combustion sources, and fugitive emissions from component leaks. Emissions from insignificant activities and routine operations that are associated with maintenance, startups and shutdowns, and releases to control devices also required quantification. To reconcile EPA emission factors with test data, process knowledge, and manufacturer`s data, a careful review of other estimation options was performed. This paper represents the results ofmore » this analysis of emission sources at oil and gas facilities, including exploration and production, compressor stations and gas plants.« less

Analysis of Fission Products on the AGR-1 Capsule Components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Paul A. Demkowicz; Jason M. Harp; Philip L. Winston

2013-03-01

The components of the AGR-1 irradiation capsules were analyzed to determine the retained inventory of fission products in order to determine the extent of in-pile fission product release from the fuel compacts. This includes analysis of (i) the metal capsule components, (ii) the graphite fuel holders, (iii) the graphite spacers, and (iv) the gas exit lines. The fission products most prevalent in the components were Ag-110m, Cs 134, Cs 137, Eu-154, and Sr 90, and the most common location was the metal capsule components and the graphite fuel holders. Gamma scanning of the graphite fuel holders was also performed tomore » determine spatial distribution of Ag-110m and radiocesium. Silver was released from the fuel components in significant fractions. The total Ag-110m inventory found in the capsules ranged from 1.2×10 2 (Capsule 3) to 3.8×10 1 (Capsule 6). Ag-110m was not distributed evenly in the graphite fuel holders, but tended to concentrate at the axial ends of the graphite holders in Capsules 1 and 6 (located at the top and bottom of the test train) and near the axial center in Capsules 2, 3, and 5 (in the center of the test train). The Ag-110m further tended to be concentrated around fuel stacks 1 and 3, the two stacks facing the ATR reactor core and location of higher burnup, neutron fluence, and temperatures compared with Stack 2. Detailed correlation of silver release with fuel type and irradiation temperatures is problematic at the capsule level due to the large range of temperatures experienced by individual fuel compacts in each capsule. A comprehensive Ag 110m mass balance for the capsules was performed using measured inventories of individual compacts and the inventory on the capsule components. For most capsules, the mass balance was within 11% of the predicted inventory. The Ag-110m release from individual compacts often exhibited a very large range within a particular capsule.« less

Emissions from ships in the northwestern United States.

PubMed

Corbett, James J

2002-03-15

Recent inventory efforts have focused on developing nonroad inventories for emissions modeling and policy insights. Characterizing these inventories geographically and explicitly treating the uncertaintiesthat result from limited emissions testing, incomplete activity and usage data, and other important input parameters currently pose the largest methodological challenges. This paper presents a commercial marine vessel (CMV) emissions inventory for Washington and Oregon using detailed statistics regarding fuel consumption, vessel movements, and cargo volumes for the Columbia and Snake River systems. The inventory estimates emissions for oxides of nitrogen (NOx), particulate matter (PM), and oxides of sulfur (SOx). This analysis estimates that annual NOx emissions from marine transportation in the Columbia and Snake River systems in Washington and Oregon equal 6900 t of NOx (as NO2) per year, 2.6 times greater than previous NO, inventories for this region. Statewide CMV NO, emissions are estimated to be 9,800 t of NOx per year. By relying on a "bottom-up" fuel consumption model that includes vessel characteristics and transit information, the river system inventory may be more accurate than previous estimates. This inventory provides modelers with bounded parametric inputs for sensitivity analysis in pollution modeling. The ability to parametrically model the uncertainty in commercial marine vessel inventories also will help policy-makers determine whether better policy decisions can be enabled through further vessel testing and improved inventory resolution.

Integrating remote sensing and local vegetation information for a high-resolution biogenic emissions inventory--application to an urbanized, semiarid region.

PubMed

Diem, J E; Comrie, A C

2000-11-01

This paper presents a methodology for the development of a high-resolution (30-m), standardized biogenic volatile organic compound (BVOC) emissions inventory and a subsequent application of the methodology to Tucson, AZ. The region's heterogeneous vegetation cover cannot be modeled accurately with low-resolution (e.g., 1-km) land cover and vegetation information. Instead, local vegetation data are used in conjunction with multispectral satellite data to generate a detailed vegetation-based land-cover database of the region. A high-resolution emissions inventory is assembled by associating the vegetation data with appropriate emissions factors. The inventory reveals a substantial variation in BVOC emissions across the region, resulting from the region's diversity of both native and exotic vegetation. The importance of BVOC emissions from forest lands, desert lands, and the urban forest changes according to regional, metropolitan, and urban scales. Within the entire Tucson region, the average isoprene, monoterpene, and OVOC fluxes observed were 454, 248, and 91 micrograms/m2/hr, respectively, with forest and desert lands emitting nearly all of the BVOCs. Within the metropolitan area, which does not include the forest lands, the average fluxes were 323, 181, and 70 micrograms/m2/hr, respectively. Within the urban area, the average fluxes were 801, 100, and 100 micrograms/m2/hr, respectively, with exotic trees such as eucalyptus, pine, and palm emitting most of the urban BVOCs. The methods presented in this paper can be modified to create detailed, standardized BVOC emissions inventories for other regions, especially those with spatially complex vegetation patterns.

Long and short term changes in the forests of the Cumberland Plateau and Mountains using large scale forest inventory data

Treesearch

Christopher M. Oswalt; Andrew J. Hartsell

2012-01-01

The Cumberland Plateau and Mountains (CPM) are a significant component of the eastern deciduous forest with biological and cultural resources strongly connected to and dependent upon the forest resources of the region. As a result, continuous inventory and monitoring is critical. The USDA Forest Service Forest Inventory and Analysis (FIA) program has been collecting...

The enhanced forest inventory and analysis program of the USDA forest service: historical perspective and announcements of statistical documentation

Treesearch

Ronald E. McRoberts; William A. Bechtold; Paul L. Patterson; Charles T. Scott; Gregory A. Reams

2005-01-01

The Forest Inventory and Analysis (FIA) program of the USDA Forest Service has initiated a transition from regional, periodic inventories to an enhanced national FIA program featuring annual measurement of a proportion of plots in each state, greater national consistency, and integration with the ground sampling component of the Forest Health Monitoring (FHM) program...

Implementation of Advanced Inventory Management Functionality in Automated Dispensing Cabinets

PubMed Central

Webb, Aaron; Lund, Jim

2015-01-01

Background: Automated dispensing cabinets (ADCs) are an integral component of distribution models in pharmacy departments across the country. There are significant challenges to optimizing ADC inventory management while minimizing use of labor and capital resources. The role of enhanced inventory control functionality is not fully defined. Objective: The aim of this project is to improve ADC inventory management by leveraging dynamic inventory standards and a low inventory alert platform. Methods: Two interventional groups and 1 historical control were included in the study. Each intervention group consisted of 6 ADCs that tested enhanced inventory management functionality. Interventions included dynamic inventory standards and a low inventory alert messaging system. Following separate implementation of each platform, dynamic inventory and low inventory alert systems were applied concurrently to all 12 ADCs. Outcome measures included number and duration of daily stockouts, ADC inventory turns, and number of phone calls related to stockouts received by pharmacy staff. Results: Low inventory alerts reduced both the number and duration of stockouts. Dynamic inventory standards reduced the number of daily stockouts without changing the inventory turns and duration of stockouts. No change was observed in number of calls related to stockouts made to pharmacy staff. Conclusions: Low inventory alerts and dynamic inventory standards are feasible mechanisms to help optimize ADC inventory management while minimizing labor and capital resources. PMID:26448672

Effects of land use/cover change and harvests on forest carbon dynamics in northern states of the United States from remote sensing and inventory data: 1992-2001

Treesearch

Daolan Zheng; Linda S. Heath; Mark J. Ducey; James E. Smith

2011-01-01

We examined spatial patterns of changes in forest area and nonsoil carbon (C) dynamics affected by land use/cover change (LUC) and harvests in 24 northern states of the United States using an integrated methodology combining remote sensing and ground inventory data between 1992 and 2001. We used the Retrofit Change Product from the Multi-Resolution Land Characteristics...

Estimated inventory of radionuclides in Former Soviet Union Naval Reactors dumped in the Kara Sea and their associated health risk

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mount, M.E.; Layton, D.W.; Schwertz, N.L.

1993-05-01

Radionuclide inventories have bin estimated for the reactor cores, reactor components, and primary system corrosion products in the former Soviet Union naval reactors dumped at the Abrosimov Inlet, Tsivolka Inlet, Stepovoy Inlet, Techeniye Inlet, and Novaya Zemlya Depression sites in the Kara Sea between 1965 and 1988. For the time of disposal, the inventories are estimated at 17 to 66 kCi of actinides plus daughters and 1695 to 4782 kCi of fission products in the reactor cores, 917 to 1127 kCi of activation products in the reactor components, and 1.4 to 1.6 kCi of activation products in the primary systemmore » corrosion products. At the present time, the inventories are estimated to have decreased to 6 to 24 kCi of actinides plus daughters and 492 to 540 kCi of fission products in the reactor cores, 124 to 126 kCi of activation products in the reactor components, and 0.16 to 0.17 kCi of activation products in the primary system corrosion products. All actinide activities are estimated to be within a factor of two.« less

Verifying the UK agricultural N2O emission inventory with tall tower measurements

NASA Astrophysics Data System (ADS)

Carnell, E. J.; Meneguz, E.; Skiba, U. M.; Misselbrook, T. H.; Cardenas, L. M.; Arnold, T.; Manning, A.; Dragosits, U.

2016-12-01

Nitrous oxide (N2O) is a key greenhouse gas (GHG), with a global warming potential 300 times greater than that of CO2. N2O is emitted from a variety of sources, predominantly from agriculture. Annual UK emission estimates are reported, to comply with government commitments under the United Nations Framework Convention on Climate Change (UNFCCC). The UK N2O inventory follows internationally agreed protocols and emission estimates are derived by applying emission factors to estimates of (anthropogenic) emission sources. This approach is useful for comparing anthropogenic emissions from different countries, but does not capture regional differences and inter-annual variability associated with environmental factors (such as climate and soils) and agricultural management. In recent years, the UK inventory approach has been refined to include regional information into its emissions estimates, in an attempt to reduce uncertainty. This study attempts to assess the difference between current published inventory methodology (default IPCC methodology) and an alternative approach, which incorporates the latest thinking, using data from recent work. For 2013, emission estimates made using the alternative approach were 30 % lower than those made using default IPCC methodology, due to the use of lower emission factors suggested by recent projects (Defra projects: AC0116, AC0213 and MinNO). The 2013 emissions estimates were disaggregated on a monthly basis using agricultural management (e.g. sowing dates), climate data and soil properties. The temporally disaggregated emission maps were used as input to the Met Office atmospheric dispersion model NAME, for comparison with measured N2O concentrations, at three observation stations (Tacolneston, E. England; Ridge Hill, W. England; Mace Head, W. Ireland) in the UK DECC network (Deriving Emissions linked to Climate Change). The Mace Head site, situated on the west coast of Ireland, was used to establish baseline concentrations. The trends in the modelled data were found to correspond with the observational data trends, with concentration peaks coinciding with periods of land spreading of manures and fertiliser application. The model run using the default IPCC methodology was found to correspond with the observed data more closely than the alternative approach.

Rapid Classification of Landsat TM Imagery for Phase 1 Stratification Using the Automated NDVI Threshold Supervised Classification (ANTSC) Methodology

Treesearch

William H. Cooke; Dennis M. Jacobs

2005-01-01

FIA annual inventories require rapid updating of pixel-based Phase 1 estimates. Scientists at the Southern Research Station are developing an automated methodology that uses a Normalized Difference Vegetation Index (NDVI) for identifying and eliminating problem FIA plots from the analysis. Problem plots are those that have questionable land use/land cover information....

2017 Workplace and Gender Relations Survey of Reserve Component Members: Statistical Methodology Report

DTIC Science & Technology

2018-04-30

2017 Workplace and Gender Relations Survey of Reserve Component Members Statistical Methodology Report Additional copies of this report...Survey of Reserve Component Members Statistical Methodology Report Office of People Analytics (OPA) 4800 Mark Center Drive, Suite...RESERVE COMPONENT MEMBERS STATISTICAL METHODOLOGY REPORT Introduction The Office of People Analytics’ Center for Health and Resilience (OPA[H&R

Spare parts management for nuclear power generation facilities

NASA Astrophysics Data System (ADS)

Scala, Natalie Michele

With deregulation, utilities in the power sector face a much more urgent imperative to emphasize cost efficiencies as compared to the days of regulation. One major opportunity for cost savings is through reductions in spare parts inventories. Most utilities are accustomed to carrying large volumes of expensive, relatively slow-moving parts because of a high degree of risk-averseness. This attitude towards risk is rooted in the days of regulation. Under regulation, companies recovered capital inventory costs by incorporating them into the base rate charged to their customers. In a deregulated environment, cost recovery is no longer guaranteed. Companies must therefore reexamine their risk profile and develop policies for spare parts inventory that are appropriate for a competitive business environment. This research studies the spare parts inventory management problem in the context of electric utilities, with a focus on nuclear power. It addresses three issues related to this problem: criticality, risk, and policy. With respect to criticality and risk, a methodology is presented that incorporates the use of influence diagrams and the Analytic Hierarchy Process (AHP). A new method is developed for group aggregation in the AHP when Saaty and Vargas' (2007) dispersion test fails and decision makers are unwilling or unable to revise their judgments. With respect to policy, a quantitative model that ranks the importance of keeping a part in inventory and recommends a corresponding stocking policy through the use of numerical simulation is developed. This methodology and its corresponding models will enable utilities that have transitioned from a regulated to a deregulated environment become more competitive in their operations while maintaining safety and reliability standards. Furthermore, the methodology developed is general enough so that other utility plants, especially those in the nuclear sector, will be able to use this approach. In addition to regulated utilities, other industries, such as aerospace, and the military can also benefit from extensions to these models, as risk profiles and subsequent policies can be adjusted to align with the business environment in which each industry or company operates.

Exploration of Korean Students' Scientific Imagination Using the Scientific Imagination Inventory

NASA Astrophysics Data System (ADS)

Mun, Jiyeong; Mun, Kongju; Kim, Sung-Won

2015-09-01

This article reports on the study of the components of scientific imagination and describes the scales used to measure scientific imagination in Korean elementary and secondary students. In this study, we developed an inventory, which we call the Scientific Imagination Inventory (SII), in order to examine aspects of scientific imagination. We identified three conceptual components of scientific imagination, which were composed of (1) scientific sensitivity, (2) scientific creativity, and (3) scientific productivity. We administered SII to 662 students (4th-8th grades) and confirmed validity and reliability using exploratory factor analysis and Cronbach α coefficient. The characteristics of Korean elementary and secondary students' overall scientific imagination and difference across gender and grade level are discussed in the results section.

Examination of Success Factors in Obtaining and Sustaining Clean Audit Opinions Within DoD Components

DTIC Science & Technology

2006-12-01

inventories …Further, unreliable cost and budget information related to nearly a reported $1 trillion of liabilities and about $347 billion of net costs...produce the financial reports required by the auditing entity. From counting inventory to preparing the financial statements themselves...financial sections within the agency count inventories , research acquisition histories or enter data; and did the agency spend money on contractors and

A land manager's guide to point counts of birds in the Southeast

USGS Publications Warehouse

Hamel, P.B.; Smith, W.P.; Twedt, D.J.; Woehr, J.R.; Morris, E.; Hamilton, R.B.; Cooper, R.J.

1996-01-01

Current widespread concern for the status of neotropical migratory birds has sparked interest in techniques for inventorying and monitoring populations of these and other birds in southeastern forest habitats. The present guide gives detailed instructions for conducting point counts of birds. It further presents a detailed methodology for the design and conduct of inventorial and monitoring surveys based on point counts, including discussion of sample size determination, distribution of counts among habitats, cooperation among neighboring land managers, vegetation sampling, standard data format, and other topics. Appendices provide additional information, making this guide a stand-alone text for managers interested in developing inventories of bird populations on their lands.

Future of Assurance: Ensuring that a System is Trustworthy

NASA Astrophysics Data System (ADS)

Sadeghi, Ahmad-Reza; Verbauwhede, Ingrid; Vishik, Claire

Significant efforts are put in defining and implementing strong security measures for all components of the comput-ing environment. It is equally important to be able to evaluate the strength and robustness of these measures and establish trust among the components of the computing environment based on parameters and attributes of these elements and best practices associated with their production and deployment. Today the inventory of techniques used for security assurance and to establish trust -- audit, security-conscious development process, cryptographic components, external evaluation - is somewhat limited. These methods have their indisputable strengths and have contributed significantly to the advancement in the area of security assurance. However, shorter product and tech-nology development cycles and the sheer complexity of modern digital systems and processes have begun to decrease the efficiency of these techniques. Moreover, these approaches and technologies address only some aspects of security assurance and, for the most part, evaluate assurance in a general design rather than an instance of a product. Additionally, various components of the computing environment participating in the same processes enjoy different levels of security assurance, making it difficult to ensure adequate levels of protection end-to-end. Finally, most evaluation methodologies rely on the knowledge and skill of the evaluators, making reliable assessments of trustworthiness of a system even harder to achieve. The paper outlines some issues in security assurance that apply across the board, with the focus on the trustworthiness and authenticity of hardware components and evaluates current approaches to assurance.

Safety evaluation -- Spent water treatment system components inventory release

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dodd, E.N. Jr.

1995-01-24

Over the past few years various impediments to shipment of generated spent basin water treatment system components have resulted in the accumulation of quantities of these waste items at 100K. Specifically, there are (as of 01/01/95) 13 grout/culvert packaged cartridge filters (CF), four unpackaged cartridge filters, 60 spent ion exchange columns (IXC) and seven ion exchange modules (IXM) at 100K awaiting shipment for final waste disposal. As a result of the accumulation of this waste, the question has arisen regarding the consequences of potential releases of the inventory of radionuclides in these waste items relative to the K Area safetymore » envelope. The purpose of this paper is to address this question. The initial step evaluating the consequences of potential release of material from the spent water treatment system components was to determine the individual and total radionuclide inventories of concern. Generally the radioisotopes of concern to the dose consequences were Sr/Y-90, Cs-137, and the transuranic (TRU) isotopes. The loading of these radioisotopes needed to be determined for each of the components of the total number of accumulated IXCs, IXMs and CFs. This evaluation examines four potential releases of material from the spent water treatment system components. These releases are: the release of material from all 39 IXCs stored in 183-KW; the release of material from the IXCs, IXMs and CFs at 105-KE and 105-KW; the release of material from the 13 CFs stored behind 105-KE; and the non-mechanistic release of the total stored waste inventory.« less

ELER software - a new tool for urban earthquake loss assessment

NASA Astrophysics Data System (ADS)

Hancilar, U.; Tuzun, C.; Yenidogan, C.; Erdik, M.

2010-12-01

Rapid loss estimation after potentially damaging earthquakes is critical for effective emergency response and public information. A methodology and software package, ELER-Earthquake Loss Estimation Routine, for rapid estimation of earthquake shaking and losses throughout the Euro-Mediterranean region was developed under the Joint Research Activity-3 (JRA3) of the EC FP6 Project entitled "Network of Research Infrastructures for European Seismology-NERIES". Recently, a new version (v2.0) of ELER software has been released. The multi-level methodology developed is capable of incorporating regional variability and uncertainty originating from ground motion predictions, fault finiteness, site modifications, inventory of physical and social elements subjected to earthquake hazard and the associated vulnerability relationships. Although primarily intended for quasi real-time estimation of earthquake shaking and losses, the routine is also equally capable of incorporating scenario-based earthquake loss assessments. This paper introduces the urban earthquake loss assessment module (Level 2) of the ELER software which makes use of the most detailed inventory databases of physical and social elements at risk in combination with the analytical vulnerability relationships and building damage-related casualty vulnerability models for the estimation of building damage and casualty distributions, respectively. Spectral capacity-based loss assessment methodology and its vital components are presented. The analysis methods of the Level 2 module, i.e. Capacity Spectrum Method (ATC-40, 1996), Modified Acceleration-Displacement Response Spectrum Method (FEMA 440, 2005), Reduction Factor Method (Fajfar, 2000) and Coefficient Method (ASCE 41-06, 2006), are applied to the selected building types for validation and verification purposes. The damage estimates are compared to the results obtained from the other studies available in the literature, i.e. SELENA v4.0 (Molina et al., 2008) and ATC-55 (Yang, 2005). An urban loss assessment exercise for a scenario earthquake for the city of Istanbul is conducted and physical and social losses are presented. Damage to the urban environment is compared to the results obtained from similar software, i.e. KOERILoss (KOERI, 2002) and DBELA (Crowley et al., 2004). The European rapid loss estimation tool is expected to help enable effective emergency response, on both local and global level, as well as public information.

BLACK Carbon Emissions from Diesel Sources in the Largest Arctic City: Case Study of Murmansk

NASA Astrophysics Data System (ADS)

Evans, M.; Kholod, N.; Malyshev, V.; Tretyakova, S.; Gusev, E.; Yu, S.; Barinov, A.

2014-12-01

Russia has very little data on its black carbon (BC) emissions. Because Russia makes up such a large share of the Arctic, understanding Russian emissions will improve our understanding of overall BC levels, BC in the Arctic and the link between BC and climate change. This paper provides a detailed, bottom-up inventory of BC emissions from diesel sources in Murmansk, Russia, along with uncertainty estimates associated with these emissions. The research team developed a detailed data collection methodology. The methodology involves assessing the vehicle fleet and activity in Murmansk using traffic, parking lot and driver surveys combined with an existing database from a vehicle inspection station and statistical data. The team also assessed the most appropriate emission factors, drawing from both Russian and international inventory methodologies. The researchers also compared fuel consumption using statistical data and bottom-up fuel calculations. They then calculated emissions for on-road transportation, off-road transportation (including mines), diesel generators, fishing and other sources. The article also provides a preliminary assessment of Russia-wide emissions of black carbon from diesel sources.

Multi-scale landslide hazard assessment: Advances in global and regional methodologies

NASA Astrophysics Data System (ADS)

Kirschbaum, Dalia; Peters-Lidard, Christa; Adler, Robert; Hong, Yang

2010-05-01

The increasing availability of remotely sensed surface data and precipitation provides a unique opportunity to explore how smaller-scale landslide susceptibility and hazard assessment methodologies may be applicable at larger spatial scales. This research first considers an emerging satellite-based global algorithm framework, which evaluates how the landslide susceptibility and satellite derived rainfall estimates can forecast potential landslide conditions. An analysis of this algorithm using a newly developed global landslide inventory catalog suggests that forecasting errors are geographically variable due to improper weighting of surface observables, resolution of the current susceptibility map, and limitations in the availability of landslide inventory data. These methodological and data limitation issues can be more thoroughly assessed at the regional level, where available higher resolution landslide inventories can be applied to empirically derive relationships between surface variables and landslide occurrence. The regional empirical model shows improvement over the global framework in advancing near real-time landslide forecasting efforts; however, there are many uncertainties and assumptions surrounding such a methodology that decreases the functionality and utility of this system. This research seeks to improve upon this initial concept by exploring the potential opportunities and methodological structure needed to advance larger-scale landslide hazard forecasting and make it more of an operational reality. Sensitivity analysis of the surface and rainfall parameters in the preliminary algorithm indicates that surface data resolution and the interdependency of variables must be more appropriately quantified at local and regional scales. Additionally, integrating available surface parameters must be approached in a more theoretical, physically-based manner to better represent the physical processes underlying slope instability and landslide initiation. Several rainfall infiltration and hydrological flow models have been developed to model slope instability at small spatial scales. This research investigates the potential of applying a more quantitative hydrological model to larger spatial scales, utilizing satellite and surface data inputs that are obtainable over different geographic regions. Due to the significant role that data and methodological uncertainties play in the effectiveness of landslide hazard assessment outputs, the methodology and data inputs are considered within an ensemble uncertainty framework in order to better resolve the contribution and limitations of model inputs and to more effectively communicate the model skill for improved landslide hazard assessment.

AdaNET Dynamic Software Inventory (DSI) prototype component acquisition plan

NASA Technical Reports Server (NTRS)

Hanley, Lionel

1989-01-01

A component acquisition plan contains the information needed to evaluate, select, and acquire software and hardware components necessary for successful completion of the AdaNET Dynamic Software Inventory (DSI) Management System Prototype. This plan will evolve and be applicable to all phases of the DSI prototype development. Resources, budgets, schedules, and organizations related to component acquisition activities are provided. A purpose and description of a software or hardware component which is to be acquired are presented. Since this is a plan for acquisition of all components, this section is not applicable. The procurement activities and events conducted by the acquirer are described and who is responsible is identified, where the activity will be performed, and when the activities will occur for each planned procurement. Acquisition requirements describe the specific requirements and standards to be followed during component acquisition. The activities which will take place during component acquisition are described. A list of abbreviations and acronyms, and a glossary are contained.

Measuring Competitive Foods in Schools: An Inventory Approach. Nutrition Assistance Program Report Series. Report No. CN-04-CFABT.

ERIC Educational Resources Information Center

Crepinsek, Mary Kay; Cole, Nancy; Golding, Joanna

2004-01-01

This Feasibility Study to Develop a Methodology to Monitor the Impact of Changes in Competitive Food Policies had two main goals: (1) Design and test a plan for collecting and analyzing data about competitive food policies and all foods offered and served to students at school; and (2) Provide a methodology for assessing the impact of changes in…

Railroad Classification Yard Technology Manual: Volume II : Yard Computer Systems

DOT National Transportation Integrated Search

1981-08-01

This volume (Volume II) of the Railroad Classification Yard Technology Manual documents the railroad classification yard computer systems methodology. The subjects covered are: functional description of process control and inventory computer systems,...

Draft federal GHG accounting and reporting : technical support document

DOT National Transportation Integrated Search

2010-07-01

This is a technical support document (TSD) that accompanies the Federal Greenhouse Gas Accounting and Reporting Guidance (or Guidance). This document provides detailed information on the inventory reporting process and accepted calculation methodolog...

Spatial inter-comparison of Top-down emission inventories in European urban areas

NASA Astrophysics Data System (ADS)

Trombetti, Marco; Thunis, Philippe; Bessagnet, Bertrand; Clappier, Alain; Couvidat, Florian; Guevara, Marc; Kuenen, Jeroen; López-Aparicio, Susana

2018-01-01

This paper presents an inter-comparison of the main Top-down emission inventories currently used for air quality modelling studies at the European level. The comparison is developed for eleven European cities and compares the distribution of emissions of NOx, SO2, VOC and PPM2.5 from the road transport, residential combustion and industry sectors. The analysis shows that substantial differences in terms of total emissions, sectorial emission shares and spatial distribution exist between the datasets. The possible reasons in terms of downscaling approaches and choice of spatial proxies are analysed and recommendations are provided for each inventory in order to work towards the harmonisation of spatial downscaling and proxy calibration, in particular for policy purposes. The proposed methodology may be useful for the development of consistent and harmonised European-wide inventories with the aim of reducing the uncertainties in air quality modelling activities.

An empirical approach to estimate soil erosion risk in Spain.

PubMed

Martín-Fernández, Luis; Martínez-Núñez, Margarita

2011-08-01

Soil erosion is one of the most important factors in land degradation and influences desertification worldwide. In 2001, the Spanish Ministry of the Environment launched the 'National Inventory of Soil Erosion (INES) 2002-2012' to study the process of soil erosion in Spain. The aim of the current article is to assess the usefulness of this National Inventory as an instrument of control, measurement and monitoring of soil erosion in Spain. The methodology and main features of this National Inventory are described in detail. The results achieved as of the end of May 2010 are presented, together with an explanation of the utility of the Inventory as a tool for planning forest hydrologic restoration, soil protection, erosion control, and protection against desertification. Finally, the authors make a comparative analysis of similar initiatives for assessing soil erosion in other countries at the national and European levels. Copyright © 2011 Elsevier B.V. All rights reserved.

Model Package Report: Hanford Soil Inventory Model SIM v.2 Build 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nichols, Will E.; Zaher, U.; Mehta, S.

The Hanford Soil Inventory Model (SIM) is a tool for the estimation of inventory of contaminants that were released to soil from liquid discharges during the U.S. Department of Energy’s Hanford Site operations. This model package report documents the construction and development of a second version of SIM (SIM-v2) to support the needs of Hanford Site Composite Analysis. The SIM-v2 is implemented using GoldSim Pro®1 software with a new model architecture that preserves the uncertainty in inventory estimates while reducing the computational burden (compared to the previous version) and allowing more traceability and transparency in calculation methodology. The calculation architecturemore » is designed in such a manner that future updates to the waste stream composition along with addition or deletion of waste sites can be performed with relative ease. In addition, the new computational platform allows for continued hardware upgrade.« less

The USA Nr Inventory: Dominant Sources and Primary Transport Pathways

NASA Astrophysics Data System (ADS)

Sabo, R. D.; Clark, C.; Sobota, D. J.; Compton, J.; Cooter, E. J.; Schwede, D. B.; Bash, J. O.; Rea, A.; Dobrowolski, J. P.

2016-12-01

Efforts to mitigate the deleterious effects of excess reactive nitrogen (Nr) on human health and ecosystem goods and service while ensuring food, biofuel, and fiber availability, is one of the most pressing environmental management challenges of this century. Effective management of Nr requires up to date inventories that quantitatively characterize the sources, transport, and transformation of Nr through the environment. The inherent complexity of the nitrogen cycle, however, through multiple exchange points across air, water, and terrestrial media, renders such inventories difficult to compile and manage. Previous Nr Inventories are for 2002 and 2007, and used data sources that have since been improved. Thus, this recent inventory will substantially advance the methodology across many sectors of the inventory (e.g. deposition and biological fixation in crops and natural systems) and create a recent snapshot that is sorely needed for policy planning and trends analysis. Here we use a simple mass balance approach to estimate the input-output budgets for all United States Geologic Survey Hydrologic Unit Code-8 watersheds. We focus on a recent year (i.e. 2012) to update the Nr Inventory, but apply the analytical approach for multiple years where possible to assess trends through time. We also compare various sector estimates using multiple methodologies. Assembling datasets that account for new Nr inputs into watersheds (e.g., atmospheric NOy deposition, food imports, biologic N fixation) and internal fluxes of recycled Nr (e.g., manure, Nr emmissions/volatilization) provide an unprecedented, data driven computation of N flux. Input-output budgets will offer insight into 1) the dominant sources of Nr in a watershed (e.g., food imports, atmospheric N deposition, or fertilizer), 2) the primary loss pathways for Nr (e.g., crop N harvest, volatilization/emissions), and 3) what watersheds are net sources versus sinks of Nr. These insights will provide needed clarity for managers looking to minimize the loss of Nr to atmospheric and aquatic compartments, while also providing a foundational database for researchers assessing the dominant controls of N retention and loss in natural and anthropogenically dominated ecosystems. Disclaimer: Views expressed are the authors' and not views or polices of the U.S.EPA.

48 CFR 245.608-5 - Special items screening.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Disposal of Contractor Inventory 245.608-5 Special items screening. (a) Special test equipment with standard components. (1) The contractor shall report any excess special test equipment (STE) using SF 1432, Inventory Schedule D (Special Tooling and Special Test Equipment). The contractor shall list and describe on...

Development of the Academic Stereotype Threat Inventory

ERIC Educational Resources Information Center

Pseekos, A. Chantelle; Dahlen, Eric R.; Levy, Jacob J.

2008-01-01

The authors describe the development and preliminary validation of the Academic Stereotype Threat Inventory, a self-report measurement of math-related stereotype threat among women. A preliminary version of the instrument was administered to 308 undergraduate women. Principal component analysis yielded a 3-factor solution. Convergent and…

Construction of a Physician Skills Inventory

ERIC Educational Resources Information Center

Richard, George V.; Zarconi, Joseph; Savickas, Mark L.

2012-01-01

The current study applied Holland's RIASEC typology to develop a "Physician Skills Inventory". We identified the transferable skills and abilities that are critical to effective performance in medicine and had 140 physicians in 25 different specialties rate the importance of those skills. Principal component analysis of their responses produced…

The 2014 National Emission Inventory for Rangeland Fires and Crop Residue Burning

EPA Science Inventory

Biomass burning has been identified as an important contributor to the degradation of air quality because of its impact on ozone and particulate matter. One component of the biomass burning inventory, crop residue burning, has been poorly characterized in the National Emissions I...

Data compilation, synthesis, and calculations used for organic-carbon storage and inventory estimates for mineral soils of the Mississippi River Basin

USGS Publications Warehouse

Buell, Gary R.; Markewich, Helaine W.

2004-01-01

U.S. Geological Survey investigations of environmental controls on carbon cycling in soils and sediments of the Mississippi River Basin (MRB), an area of 3.3 x 106 square kilometers (km2), have produced an assessment tool for estimating the storage and inventory of soil organic carbon (SOC) by using soil-characterization data from Federal, State, academic, and literature sources. The methodology is based on the linkage of site-specific SOC data (pedon data) to the soil-association map units of the U.S. Department of Agriculture State Soil Geographic (STATSGO) and Soil Survey Geographic (SSURGO) digital soil databases in a geographic information system. The collective pedon database assembled from individual sources presently contains 7,321 pedon records representing 2,581 soil series. SOC storage, in kilograms per square meter (kg/m2), is calculated for each pedon at standard depth intervals from 0 to 10, 10 to 20, 20 to 50, and 50 to 100 centimeters. The site-specific storage estimates are then regionalized to produce national-scale (STATSGO) and county-scale (SSURGO) maps of SOC to a specified depth. Based on this methodology, the mean SOC storage for the top meter of mineral soil in the MRB is approximately 10 kg/m2, and the total inventory is approximately 32.3 Pg (1 petagram = 109 metric tons). This inventory is from 2.5 to 3 percent of the estimated global mineral SOC pool.

What is in the flask? Going beyond inventories

NASA Astrophysics Data System (ADS)

Andres, R. J.; Patra, P. K.; Piper, S.

2010-12-01

Compiling accurate inventories is tough work. Spatial, temporal, and altitudinal constraints all impact inventory accuracy and utility. However, while there is considerable challenge in creating inventories, the creation process needs to be mindful of inventory utilization. No inventory is perfect for all needs, yet inventories can be constructed to meet many needs. This presentation focuses on the use of a global, monthly, fossil-fuel carbon dioxide inventory. This inventory serves as one input into an atmospheric general circulation model (AGCM) based chemistry-transport model (ACTM). The inquiry centers on if fossil fuel emissions significantly impact the seasonal cycle of measured atmospheric carbon dioxide concentrations. Model results will be compared to Scripps Institution of Oceanography (SIO) flask and continuous analyzer data. Primary metrics to be used in the comparison are slope and correlation analyses. Slope analysis will help assess the degree to which model results agree with SIO data. Correlation analysis will help assess the degree to which the various model components (i.e., fossil fuels, terrestrial biosphere, oceans) contribute to the overall seasonal cycle. The importance of this example is that it couples inventory creation with inventory utilization. This demonstration of a new inventory data set shows the utility of carefully crafted inventory data sets to the broader community.

39 CFR 501.14 - Postage Evidencing System inventory control processes.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 39 Postal Service 1 2010-07-01 2010-07-01 false Postage Evidencing System inventory control processes. 501.14 Section 501.14 Postal Service UNITED STATES POSTAL SERVICE POSTAGE PROGRAMS AUTHORIZATION... affect Postal Service revenues, or of any memory component, or that affects the accuracy of the registers...

A Factor Analytic Validation of Holland's Vocational Preference Inventory

ERIC Educational Resources Information Center

Di Scipio, William J.

1974-01-01

A principal components analysis was applied to a 135-item pool of the Holland Vocational Preference Inventory, Sixth Revision. The a priori clinical scales were partially upheld with differences attributed to the characteristics of the sample and sociopolitical time context during which the test was administered. (Author)

Relationships Between the Vocational Preference Inventory and the Edwards Personal Preference Schedule

ERIC Educational Resources Information Center

Wakefield, James A., Jr.; Cunningham, Claude H.

1975-01-01

The Vocational Preference Inventory and the Edwards Personal Preference Schedule were administered to 372 undergraduates. The two instruments were compared using canonical analysis. The analysis revealed three significant relationships between components of the two instruments. The relationships were viewed as supportive of Holland's theory of…

Evidence for the Criterion Validity and Clinical Utility of the Pathological Narcissism Inventory

ERIC Educational Resources Information Center

Thomas, Katherine M.; Wright, Aidan G. C.; Lukowitsky, Mark R.; Donnellan, M. Brent; Hopwood, Christopher J.

2012-01-01

In this study, the authors evaluated aspects of criterion validity and clinical utility of the grandiosity and vulnerability components of the Pathological Narcissism Inventory (PNI) using two undergraduate samples (N = 299 and 500). Criterion validity was assessed by evaluating the correlations of narcissistic grandiosity and narcissistic…

The Career Futures Inventory-Revised: Measuring Dimensions of Career Adaptability

ERIC Educational Resources Information Center

Rottinghaus, Patrick J.; Buelow, Kristine L.; Matyja, Anna; Schneider, Madalyn R.

2012-01-01

This study reports the development and initial validation of the "Career Futures Inventory-Revised" (CFI-R) in two large samples of university students. The 28-item CFI-R assesses aspects of career adaptability, including positive career planning attitudes, general outcome expectations, and components of Parsons' tripartite model and…

The Circumplex Pattern of the Life Styles Inventory: A Reanalysis.

ERIC Educational Resources Information Center

Levin, Joseph

1991-01-01

A reanalysis of the intercorrelation matrix from a principal components analysis of the Life Styles Inventory was conducted using a Canadian sample. Using nonmetric multidimensional scaling, analyses show an almost perfect circumplex pattern. Results illustrate the inadequacy of factor analytic procedures for the analysis and representation of a…

Structural and Discriminant Validity of the Career Factors Inventory

ERIC Educational Resources Information Center

Dickinson, Josephine; Tokar, David M.

2004-01-01

Using a sample of 350 college students, this study examined the structural and discriminant validity of the Career Factors Inventory (CFI; Chartrand, Robbins, Morrill, & Boggs, 1990), a multidimensional measure of career indecision intended to be scored for two informational indecision components (Need for Career Information and Need for…

Physics Metacognition Inventory Part Ii: Confirmatory Factor Analysis and Rasch Analysis

ERIC Educational Resources Information Center

Taasoobshirazi, Gita; Bailey, MarLynn; Farley, John

2015-01-01

The Physics Metacognition Inventory was developed to measure physics students' metacognition for problem solving. In one of our earlier studies, an exploratory factor analysis provided evidence of preliminary construct validity, revealing six components of students' metacognition when solving physics problems including knowledge of cognition,…

Regional Earthquake Shaking and Loss Estimation

NASA Astrophysics Data System (ADS)

Sesetyan, K.; Demircioglu, M. B.; Zulfikar, C.; Durukal, E.; Erdik, M.

2009-04-01

This study, conducted under the JRA-3 component of the EU NERIES Project, develops a methodology and software (ELER) for the rapid estimation of earthquake shaking and losses in the Euro-Mediterranean region. This multi-level methodology developed together with researchers from Imperial College, NORSAR and ETH-Zurich is capable of incorporating regional variability and sources of uncertainty stemming from ground motion predictions, fault finiteness, site modifications, inventory of physical and social elements subjected to earthquake hazard and the associated vulnerability relationships. GRM Risk Management, Inc. of Istanbul serves as sub-contractor tor the coding of the ELER software. The methodology encompasses the following general steps: 1. Finding of the most likely location of the source of the earthquake using regional seismotectonic data base and basic source parameters, and if and when possible, by the estimation of fault rupture parameters from rapid inversion of data from on-line stations. 2. Estimation of the spatial distribution of selected ground motion parameters through region specific ground motion attenuation relationships and using shear wave velocity distributions.(Shake Mapping) 4. Incorporation of strong ground motion and other empirical macroseismic data for the improvement of Shake Map 5. Estimation of the losses (damage, casualty and economic) at different levels of sophistication (0, 1 and 2) that commensurate with the availability of inventory of human built environment (Loss Mapping) Both Level 0 (similar to PAGER system of USGS) and Level 1 analyses of the ELER routine are based on obtaining intensity distributions analytically and estimating total number of casualties and their geographic distribution either using regionally adjusted intensity-casualty or magnitude-casualty correlations (Level 0) of using regional building inventory data bases (Level 1). Level 0 analysis is similar to the PAGER system being developed by USGS. For given basis source parameters the intensity distributions can be computed using: a)Regional intensity attenuation relationships, b)Intensity correlations with attenuation relationship based PGV, PGA, and Spectral Amplitudes and, c)Intensity correlations with synthetic Fourier Amplitude Spectrum. In Level 1 analysis EMS98 based building vulnerability relationships are used for regional estimates of building damage and the casualty distributions. Results obtained from pilot applications of the Level 0 and Level 1 analysis modes of the ELER software to the 1999 M 7.4 Kocaeli, 1995 M 6.1 Dinar, and 2007 M 5.4 Bingol earthquakes in terms of ground shaking and losses are presented and comparisons with the observed losses are made. The regional earthquake shaking and loss information is intented for dissemination in a timely manner to related agencies for the planning and coordination of the post-earthquake emergency response. However the same software can also be used for scenario earthquake loss estimation and related Monte-Carlo type simulations.

Fast and optimized methodology to generate road traffic emission inventories and their uncertainties

NASA Astrophysics Data System (ADS)

Blond, N.; Ho, B. Q.; Clappier, A.

2012-04-01

Road traffic emissions are one of the main sources of air pollution in the cities. They are also the main sources of uncertainties in the air quality numerical models used to forecast and define abatement strategies. Until now, the available models for generating road traffic emission always required a big effort, money and time. This inhibits decisions to preserve air quality, especially in developing countries where road traffic emissions are changing very fast. In this research, we developed a new model designed to fast produce road traffic emission inventories. This model, called EMISENS, combines the well-known top-down and bottom-up approaches to force them to be coherent. A Monte Carlo methodology is included for computing emission uncertainties and the uncertainty rate due to each input parameters. This paper presents the EMISENS model and a demonstration of its capabilities through an application over Strasbourg region (Alsace), France. Same input data as collected for Circul'air model (using bottom-up approach) which has been applied for many years to forecast and study air pollution by the Alsatian air quality agency, ASPA, are used to evaluate the impact of several simplifications that a user could operate . These experiments give the possibility to review older methodologies and evaluate EMISENS results when few input data are available to produce emission inventories, as in developing countries and assumptions need to be done. We show that same average fraction of mileage driven with a cold engine can be used for all the cells of the study domain and one emission factor could replace both cold and hot emission factors.

Assembly line performance and modeling

NASA Astrophysics Data System (ADS)

Rane, Arun B.; Sunnapwar, Vivek K.

2017-09-01

Automobile sector forms the backbone of manufacturing sector. Vehicle assembly line is important section in automobile plant where repetitive tasks are performed one after another at different workstations. In this thesis, a methodology is proposed to reduce cycle time and time loss due to important factors like equipment failure, shortage of inventory, absenteeism, set-up, material handling, rejection and fatigue to improve output within given cost constraints. Various relationships between these factors, corresponding cost and output are established by scientific approach. This methodology is validated in three different vehicle assembly plants. Proposed methodology may help practitioners to optimize the assembly line using lean techniques.

Global or local construction materials for post-disaster reconstruction? Sustainability assessment of 20 post-disaster shelter designs

PubMed Central

Zea Escamilla, E.; Habert, G.

2015-01-01

This data article presents the life cycle inventories of 20 transitional shelter solutions. The data was gathered from the reports 8 shelter designs [1]; 10 post-disaster shelter designs [2]; the environmental impact of brick production outside of Europe [3]; and the optimization of bamboo-based post-disaster housing units for tropical and subtropical regions using LCA methodologies [4]. These reports include bill of quantities, plans, performance analysis, and lifespan of the studied shelters. The data from these reports was used to develop the Life Cycle Inventories (LCI). All the amounts were converted from their original units (length, volume and amount) into mass (kg) units and the transport distance into ton×km. These LCIs represent the production phases of each shelter and the transportation distances for the construction materials. Two types of distances were included, local (road) and international (freight ship), which were estimated based on the area of the country of study. Furthermore, the digital visualization of the shelters is presented for each of the 20 designs. Moreover, this data article presents a summary of the results for the categories Environment, Cost and Risk and the contribution to the environmental impact from the different building components of each shelter. These results are related to the article “Global or local construction materials for post-disaster reconstruction? Sustainability assessment of 20 post-disaster shelter designs”[5] PMID:26217807

Global or local construction materials for post-disaster reconstruction? Sustainability assessment of 20 post-disaster shelter designs.

PubMed

Zea Escamilla, E; Habert, G

2015-09-01

This data article presents the life cycle inventories of 20 transitional shelter solutions. The data was gathered from the reports 8 shelter designs [1]; 10 post-disaster shelter designs [2]; the environmental impact of brick production outside of Europe [3]; and the optimization of bamboo-based post-disaster housing units for tropical and subtropical regions using LCA methodologies [4]. These reports include bill of quantities, plans, performance analysis, and lifespan of the studied shelters. The data from these reports was used to develop the Life Cycle Inventories (LCI). All the amounts were converted from their original units (length, volume and amount) into mass (kg) units and the transport distance into ton×km. These LCIs represent the production phases of each shelter and the transportation distances for the construction materials. Two types of distances were included, local (road) and international (freight ship), which were estimated based on the area of the country of study. Furthermore, the digital visualization of the shelters is presented for each of the 20 designs. Moreover, this data article presents a summary of the results for the categories Environment, Cost and Risk and the contribution to the environmental impact from the different building components of each shelter. These results are related to the article "Global or local construction materials for post-disaster reconstruction? Sustainability assessment of 20 post-disaster shelter designs"[5].

Ragweed (Ambrosia) pollen source inventory for Austria.

PubMed

Karrer, G; Skjøth, C A; Šikoparija, B; Smith, M; Berger, U; Essl, F

2015-08-01

This study improves the spatial coverage of top-down Ambrosia pollen source inventories for Europe by expanding the methodology to Austria, a country that is challenging in terms of topography and the distribution of ragweed plants. The inventory combines annual ragweed pollen counts from 19 pollen-monitoring stations in Austria (2004-2013), 657 geographical observations of Ambrosia plants, a Digital Elevation Model (DEM), local knowledge of ragweed ecology and CORINE land cover information from the source area. The highest mean annual ragweed pollen concentrations were generally recorded in the East of Austria where the highest densities of possible growth habitats for Ambrosia were situated. Approximately 99% of all observations of Ambrosia populations were below 745m. The European infection level varies from 0.1% at Freistadt in Northern Austria to 12.8% at Rosalia in Eastern Austria. More top-down Ambrosia pollen source inventories are required for other parts of Europe. A method for constructing top-down pollen source inventories for invasive ragweed plants in Austria, a country that is challenging in terms of topography and ragweed distribution. Crown Copyright © 2015. Published by Elsevier B.V. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khaleel, R.; Mehta, S.; Nichols, W. E.

This annual review provides the projected dose estimates of radionuclide inventories disposed in the active 200 West Area Low-Level Burial Grounds (LLBGs) since September 26, 1988. These estimates area calculated using the original does methodology developed in the performance assessment (PA) analysis (WHC-EP-0645).

Stakeholder Meetings on Black Carbon from Diesel Sources in the Russian Arctic

EPA Pesticide Factsheets

From January 28-February 1, 2013, EPA and its partners held meetings in Murmansk and Moscow with key Russian stakeholders to gather input into the project’s emissions inventory methodologies and potential pilot project ideas.

78 FR 23735 - Analysis of Service Contract Inventory for FY 2011 and the Planned Analysis of the FY 2012...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-22

...;and investigations, committee meetings, agency decisions and rulings, #0;delegations of authority... Interest Functions Product Service Codes (PSCs) studied by the Agency; (2) The methodology used by the...

Stirling Convertor Fasteners Reliability Quantification

NASA Technical Reports Server (NTRS)

Shah, Ashwin R.; Korovaichuk, Igor; Kovacevich, Tiodor; Schreiber, Jeffrey G.

2006-01-01

Onboard Radioisotope Power Systems (RPS) being developed for NASA s deep-space science and exploration missions require reliable operation for up to 14 years and beyond. Stirling power conversion is a candidate for use in an RPS because it offers a multifold increase in the conversion efficiency of heat to electric power and reduced inventory of radioactive material. Structural fasteners are responsible to maintain structural integrity of the Stirling power convertor, which is critical to ensure reliable performance during the entire mission. Design of fasteners involve variables related to the fabrication, manufacturing, behavior of fasteners and joining parts material, structural geometry of the joining components, size and spacing of fasteners, mission loads, boundary conditions, etc. These variables have inherent uncertainties, which need to be accounted for in the reliability assessment. This paper describes these uncertainties along with a methodology to quantify the reliability, and provides results of the analysis in terms of quantified reliability and sensitivity of Stirling power conversion reliability to the design variables. Quantification of the reliability includes both structural and functional aspects of the joining components. Based on the results, the paper also describes guidelines to improve the reliability and verification testing.

NCCN Mountain Lakes Monitoring Strategy: Guidelines to Resolution

USGS Publications Warehouse

Hoffman, Robert L.; Huff, Mark H.

2008-01-01

The North Coast and Cascades Network (NCCN) Inventory and Monitoring Program provides funds to its Network Parks to plan and implement the goals and objectives of the National Park Services? (NPS) Inventory and Monitoring (I&M) Program. The primary purpose of the I&M program is to develop and implement a long-term monitoring program in each network. The purpose of this document is to describe the outcome of a meeting held to find solutions to obstacles inhibiting development of a unified core design and methodology for mountain lake monitoring.

The Factor Structure of the Beck Depression Inventory-II: An Evaluation

ERIC Educational Resources Information Center

Vanheule, Stijn; Desmet, Mattias; Groenvynck, Hans; Rosseel, Yves; Fontaine, Johnny

2008-01-01

The Beck Depression Inventory-II (BDI-II) is a frequently used scale for measuring depressive severity. BDI-II data (404 clinical; 695 nonclinical adults) were analyzed by means of confirmatory factor analysis to test whether the factor structure model with a somatic-affective and cognitive component of depression, formulated by Beck and…

A tree biomass and carbon estimation system

Treesearch

Emily B. Schultz; Thomas G. Matney; Donald L. Grebner

2013-01-01

Appropriate forest management decisions for the developing woody biofuel and carbon credit markets require inventory and growth-and-yield systems reporting component tree dry weight biomass estimates. We have developed an integrated growth-and-yield and biomass/carbon calculator. The objective was to provide Mississippi’s State inventory system with bioenergy economic...

Development of the crop residue and rangeland burning in the 2014 National Emissions Inventory using information from multiple sources

EPA Science Inventory

Biomass burning has been identified as an important contributor to the degradation of air quality because of its impact on ozone and particulate matter. One component of the biomass burning inventory, crop residue burning, has been poorly characterized in the National Emissions I...

A Critical Analysis of Eight Informal Reading Inventories

ERIC Educational Resources Information Center

Nilsson, Nina L.

2008-01-01

For this content analysis study, the author examined and cross-compared the various ways in which eight informal reading inventories (IRIs) published from 2004 to 2008 address key issues relevant to new U.S. federal guidelines and the National Reading Panel's five critical components of reading instruction. Results suggest the IRIs range in…

A model for inventory of ammonia emissions from agriculture in the Netherlands

NASA Astrophysics Data System (ADS)

Velthof, G. L.; van Bruggen, C.; Groenestein, C. M.; de Haan, B. J.; Hoogeveen, M. W.; Huijsmans, J. F. M.

2012-01-01

Agriculture is the major source of ammonia (NH 3). Methodologies are needed to quantify national NH 3 emissions and to identify the most effective options to mitigate NH 3 emissions. Generally, NH 3 emissions from agriculture are quantified using a nitrogen (N) flow approach, in which the NH 3 emission is calculated from the N flows and NH 3 emission factors. Because of the direct dependency between NH 3 volatilization and Total Ammoniacal N (TAN; ammonium-N + N compounds readily broken down to ammonium) an approach based on TAN is preferred to calculate NH 3 emission instead of an approach based on total N. A TAN-based NH 3-inventory model was developed, called NEMA (National Emission Model for Ammonia). The total N excretion and the fraction of TAN in the excreted N are calculated from the feed composition and N digestibility of the components. TAN-based emission factors were derived or updated for housing systems, manure storage outside housing, manure application techniques, N fertilizer types, and grazing. The NEMA results show that the total NH 3 emission from agriculture in the Netherlands in 2009 was 88.8 Gg NH 3-N, of which 50% from housing, 37% from manure application, 9% from mineral N fertilizer, 3% from outside manure storage, and 1% from grazing. Cattle farming was the dominant source of NH 3 in the Netherlands (about 50% of the total NH 3 emission). The NH 3 emission expressed as percentage of the excreted N was 22% of the excreted N for poultry, 20% for pigs, 15% for cattle, and 12% for other livestock, which is mainly related to differences in emissions from housing systems. The calculated ammonia emission was most sensitive to changes in the fraction of TAN in the excreted manure and to the emission factor of manure application. From 2011, NEMA will be used as official methodology to calculate the national NH 3 emission from agriculture in the Netherlands.

Software for Managing Inventory of Flight Hardware

NASA Technical Reports Server (NTRS)

Salisbury, John; Savage, Scott; Thomas, Shirman

2003-01-01

The Flight Hardware Support Request System (FHSRS) is a computer program that relieves engineers at Marshall Space Flight Center (MSFC) of most of the non-engineering administrative burden of managing an inventory of flight hardware. The FHSRS can also be adapted to perform similar functions for other organizations. The FHSRS affords a combination of capabilities, including those formerly provided by three separate programs in purchasing, inventorying, and inspecting hardware. The FHSRS provides a Web-based interface with a server computer that supports a relational database of inventory; electronic routing of requests and approvals; and electronic documentation from initial request through implementation of quality criteria, acquisition, receipt, inspection, storage, and final issue of flight materials and components. The database lists both hardware acquired for current projects and residual hardware from previous projects. The increased visibility of residual flight components provided by the FHSRS has dramatically improved the re-utilization of materials in lieu of new procurements, resulting in a cost savings of over $1.7 million. The FHSRS includes subprograms for manipulating the data in the database, informing of the status of a request or an item of hardware, and searching the database on any physical or other technical characteristic of a component or material. The software structure forces normalization of the data to facilitate inquiries and searches for which users have entered mixed or inconsistent values.

Summary for Stakeholder Meetings on Black Carbon from Diesel Sources in the Russian Arctic

EPA Pesticide Factsheets

From January 28-February 1, 2013, EPA and its partners held meetings in Murmansk and Moscow with key Russian stakeholders to gather input into the project’s emissions inventory methodologies and potential pilot project ideas.

REVISED EMISSIONS ESTIMATION METHODOLOGIES FOR INDUSTRIAL, RESIDENTIAL, AND ELECTRIC UTILITY STATIONARY COMBUSTION SOURCES

EPA Science Inventory

The report describes the development of improved and streamlined EPA emission estimation methods for stationary combustion area sources by the Joint Emissions Inventory Oversight Group (JEIOG) research program. These sources include categories traditionally labeled "other statio...

The Cylindrical Component Methodology Evaluation Module for MUVES-S2

DTIC Science & Technology

2017-04-01

ARL-TR-7990 ● APR 2017 US Army Research Laboratory The Cylindrical Component Methodology Evaluation Module for MUVES-S2 by...Laboratory The Cylindrical Component Methodology Evaluation Module for MUVES-S2 by David S Butler, Marianne Kunkel, and Brian G Smith...Methodology Evaluation Module for MUVES-S2 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) David S Butler, Marianne

Analysis of Turbulent Boundary-Layer over Rough Surfaces with Application to Projectile Aerodynamics

DTIC Science & Technology

1988-12-01

12 V. APPLICATION IN COMPONENT BUILD-UP METHODOLOGIES ....................... 12 1. COMPONENT BUILD-UP IN DRAG...dimensional roughness. II. CLASSIFICATION OF PREDICTION METHODS Prediction methods can be classified into two main approache-: 1) Correlation methodologies ...data are availaNe. V. APPLICATION IN COMPONENT BUILD-UP METHODOLOGIES 1. COMPONENT BUILD-UP IN DRAG The new correlation can be used for an engine.ring

Ten-Ecosystem Study. [Grand and Weld Counties, Colorado; Warren County, Pennsylvania; St. Louis County, Minnesota; Sandoval County, New Mexico; Kershaw County, South Carolina; Fort Yukon, Alaska; Grays Harbor County, Washington; and Washington County, Missouri.

NASA Technical Reports Server (NTRS)

Mazade, A. V. (Principal Investigator)

1981-01-01

Remote sensing methodology developed for the Nationwide Forestry Applications Program utilize computer data processing procedures for performing inventories from satellite imagery. The Ten-Ecosystem Study (TES) was developed to test the processing procedures in an intermediate-sized application study. The results of TES indicate that LANDSAT multispectral imagery and associated automatic data processing techniques can be used to distinguish softwood, hardwood, grassland, and water and make inventory of these classes with an accuracy of 70 percent or better. The technical problems encountered during the TES and the solutions and insights to these problems are discussed. The TES experience is useful in planning subsequent inventories utilizing remote sensing technology.

Automatic Estimation of the Radiological Inventory for the Dismantling of Nuclear Facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garcia-Bermejo, R.; Felipe, A.; Gutierrez, S.

The estimation of the radiological inventory of Nuclear Facilities to be dismantled is a process that included information related with the physical inventory of all the plant and radiological survey. Estimation of the radiological inventory for all the components and civil structure of the plant could be obtained with mathematical models with statistical approach. A computer application has been developed in order to obtain the radiological inventory in an automatic way. Results: A computer application that is able to estimate the radiological inventory from the radiological measurements or the characterization program has been developed. In this computer applications has beenmore » included the statistical functions needed for the estimation of the central tendency and variability, e.g. mean, median, variance, confidence intervals, variance coefficients, etc. This computer application is a necessary tool in order to be able to estimate the radiological inventory of a nuclear facility and it is a powerful tool for decision taken in future sampling surveys.« less

A new vehicle emission inventory for China with high spatial and temporal resolution

NASA Astrophysics Data System (ADS)

Zheng, B.; Huo, H.; Zhang, Q.; Yao, Z. L.; Wang, X. T.; Yang, X. F.; Liu, H.; He, K. B.

2013-12-01

This study is the first in a series of papers that aim to develop high-resolution emission databases for different anthropogenic sources in China. Here we focus on on-road transportation. Because of the increasing impact of on-road transportation on regional air quality, developing an accurate and high-resolution vehicle emission inventory is important for both the research community and air quality management. This work proposes a new inventory methodology to improve the spatial and temporal accuracy and resolution of vehicle emissions in China. We calculate, for the first time, the monthly vehicle emissions (CO, NMHC, NOx, and PM2.5) for 2008 in 2364 counties (an administrative unit one level lower than city) by developing a set of approaches to estimate vehicle stock and monthly emission factors at county-level, and technology distribution at provincial level. We then introduce allocation weights for the vehicle kilometers traveled to assign the county-level emissions onto 0.05° × 0.05° grids based on the China Digital Road-network Map (CDRM). The new methodology overcomes the common shortcomings of previous inventory methods, including neglecting the geographical differences between key parameters and using surrogates that are weakly related to vehicle activities to allocate vehicle emissions. The new method has great advantages over previous methods in depicting the spatial distribution characteristics of vehicle activities and emissions. This work provides a better understanding of the spatial representation of vehicle emissions in China and can benefit both air quality modeling and management with improved spatial accuracy.

Applying GRADE-CERQual to qualitative evidence synthesis findings-paper 3: how to assess methodological limitations.

PubMed

Munthe-Kaas, Heather; Bohren, Meghan A; Glenton, Claire; Lewin, Simon; Noyes, Jane; Tunçalp, Özge; Booth, Andrew; Garside, Ruth; Colvin, Christopher J; Wainwright, Megan; Rashidian, Arash; Flottorp, Signe; Carlsen, Benedicte

2018-01-25

The GRADE-CERQual (Confidence in Evidence from Reviews of Qualitative research) approach has been developed by the GRADE (Grading of Recommendations Assessment, Development and Evaluation) Working Group. The approach has been developed to support the use of findings from qualitative evidence syntheses in decision-making, including guideline development and policy formulation. CERQual includes four components for assessing how much confidence to place in findings from reviews of qualitative research (also referred to as qualitative evidence syntheses): (1) methodological limitations, (2) coherence, (3) adequacy of data and (4) relevance. This paper is part of a series providing guidance on how to apply CERQual and focuses on CERQual's methodological limitations component. We developed the methodological limitations component by searching the literature for definitions, gathering feedback from relevant research communities and developing consensus through project group meetings. We tested the CERQual methodological limitations component within several qualitative evidence syntheses before agreeing on the current definition and principles for application. When applying CERQual, we define methodological limitations as the extent to which there are concerns about the design or conduct of the primary studies that contributed evidence to an individual review finding. In this paper, we describe the methodological limitations component and its rationale and offer guidance on how to assess methodological limitations of a review finding as part of the CERQual approach. This guidance outlines the information required to assess methodological limitations component, the steps that need to be taken to assess methodological limitations of data contributing to a review finding and examples of methodological limitation assessments. This paper provides guidance for review authors and others on undertaking an assessment of methodological limitations in the context of the CERQual approach. More work is needed to determine which criteria critical appraisal tools should include when assessing methodological limitations. We currently recommend that whichever tool is used, review authors provide a transparent description of their assessments of methodological limitations in a review finding. We expect the CERQual approach and its individual components to develop further as our experiences with the practical implementation of the approach increase.

Psychometric properties of the Swedish childbirth self-efficacy inventory (Swe-CBSEI)

PubMed Central

2014-01-01

Background Previous research has reported that women who are admitted to delivery wards in early labour process before an active stage of labour has started run an increased risk of instrumental deliveries. Therefore, it is essential to focus on factors such as self-efficacy that can enhance a woman’s own ability to cope with the first stage of labour. However, there was no Swedish instrument measuring childbirth self-efficacy available. Thus, the aim of the study was to translate the Childbirth Self-efficacy Inventory and to psychometrically test the Swedish version on first- time mothers within the Swedish culture. Methods The method included a forward-backward translation with face and content validity. The psychometric properties were evaluated using a Principal Component Analysis and by using Cronbach’s alpha coefficient and inter-item correlations. Descriptive statistics and non-parametric tests were used to describe and compare the scales. All data were collected from January 2011 to June 2012, from 406 pregnant women during the gestational week 35-42. Results The Swedish version of the Childbirth Self-Efficacy Inventory indicated good reliability and the Principal Component Analysis showed a three-component structure. The Wilcoxon Signed-Ranks Test indicated that the women could differentiate between the concepts outcome expectancy and self-efficacy expectatancy and between the two labour stages, active stage and the second stage of labour. Conclusions The Swedish version of Childbirth Self-efficacy Inventory is a reliable and valid instrument. The inventory can act as a tool to identify those women who need extra support and to evaluate the efforts of improving women’s self-efficacy during pregnancy. PMID:24383788

OIL AND GAS FIELD EMISSIONS SURVEY

EPA Science Inventory

The report gives results of an oil and gas field emissions survey. The production segment of the oil and gas industry has been identified as a source category that requires the development of more reliable emissions inventory methodologies. The overall purpose of the project was ...

Evaluation of the service performance of bridge components.

DOT National Transportation Integrated Search

2004-08-01

This study was initiated to provide review of common bridges to determine the performance of their components. Seven bridge types were selected that constituted 85 % of the Kentucky Transportation Cabinet (KYTC) bridge inventory. 319 bridges were ins...

The new Brazilian national forest inventory

Treesearch

Joberto V. de Freitas; Yeda M. M. de Oliveira; Doadi A. Brena; Guilherme L.A. Gomide; Jose Arimatea Silva; < i> et al< /i>

2009-01-01

The new Brazilian national forest inventory (NFI) is being planned to be carried out through five components: (1) general coordination, led by the Brazilian Forest Service; (2) vegetation mapping, which will serve as the basis for sample plot location; (3) field data collection; (4) landscape data collection of 10 x 10-km sample plots, based on high-resolution...

The Inventory of Pre-Marital Conflict: Clinical and Educational Applications.

ERIC Educational Resources Information Center

Fournier, David G.; And Others

The Inventory of Pre-Marital Conflict (IPMC) is a systematic procedure for the diagnosis and assessment of pre-marital conflict and related issues. The self-report component of the IPMC involves a series of 18 hypothetical conflict situations. The individual responds to each of these by evaluating who is primarily responsible for the problem, and…

Driving While Impaired (DWI) Intervention Service Provider Orientations: The Scales of the DWI Therapeutic Educator Inventory (DTEI)

ERIC Educational Resources Information Center

DeMuro, Scott; Wanberg, Kenneth; Anderson, Rachel

2011-01-01

The therapeutic educator who provides services to driving while impaired (DWI) offenders is a unique professional hybrid, combining education and therapeutic service delivery. In an effort to understand and address this service provider, a 69-item DWI Therapeutic Educator Inventory (DTEI) was constructed. Using principal components and common…

The combination of simulation and response methodology and its application in an aggregate production plan

NASA Astrophysics Data System (ADS)

Chen, Zhiming; Feng, Yuncheng

1988-08-01

This paper describes an algorithmic structure for combining simulation and optimization techniques both in theory and practice. Response surface methodology is used to optimize the decision variables in the simulation environment. A simulation-optimization software has been developed and successfully implemented, and its application to an aggregate production planning simulation-optimization model is reported. The model's objective is to minimize the production cost and to generate an optimal production plan and inventory control strategy for an aircraft factory.

Short-term energy outlook. Volume 2. Methodology

NASA Astrophysics Data System (ADS)

1983-05-01

Recent changes in forecasting methodology for nonutility distillate fuel oil demand and for the near-term petroleum forecasts are discussed. The accuracy of previous short-term forecasts of most of the major energy sources published in the last 13 issues of the Outlook is evaluated. Macroeconomic and weather assumptions are included in this evaluation. Energy forecasts for 1983 are compared. Structural change in US petroleum consumption, the use of appropriate weather data in energy demand modeling, and petroleum inventories, imports, and refinery runs are discussed.

Supply chain optimization at an academic medical center.

PubMed

Labuhn, Jonathan; Almeter, Philip; McLaughlin, Christopher; Fields, Philip; Turner, Benjamin

2017-08-01

A successful supply chain optimization project that leveraged technology, engineering principles, and a technician workflow redesign in the setting of a growing health system is described. With continued rises in medication costs, medication inventory management is increasingly important. Proper management of central pharmacy inventory and floor-stock inventory in automated dispensing cabinets (ADCs) can be challenging. In an effort to improve control of inventory costs in the central pharmacy of a large academic medical center, the pharmacy department implemented a supply chain optimization project in collaboration with the medical center's inhouse team of experts on process improvement and industrial engineering. The project had 2 main components: (1) upgrading and reconfiguring carousel technology within an expanded central pharmacy footprint to generate accurate floor-stock inventory replenishment reports, which resulted in efficiencies within the medication-use system, and (2) implementing a technician workflow redesign and algorithm to right-size the ADC inventory, which decreased inventory stockouts (i.e., incidents of depletion of medication stock) and improved ADC user satisfaction. Through a multifaceted approach to inventory management, the number of stockouts per month was decreased and ADC inventory was optimized, resulting in a one-time inventory cost savings of $220,500. Copyright © 2017 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

Design Optimization Method for Composite Components Based on Moment Reliability-Sensitivity Criteria

NASA Astrophysics Data System (ADS)

Sun, Zhigang; Wang, Changxi; Niu, Xuming; Song, Yingdong

2017-08-01

In this paper, a Reliability-Sensitivity Based Design Optimization (RSBDO) methodology for the design of the ceramic matrix composites (CMCs) components has been proposed. A practical and efficient method for reliability analysis and sensitivity analysis of complex components with arbitrary distribution parameters are investigated by using the perturbation method, the respond surface method, the Edgeworth series and the sensitivity analysis approach. The RSBDO methodology is then established by incorporating sensitivity calculation model into RBDO methodology. Finally, the proposed RSBDO methodology is applied to the design of the CMCs components. By comparing with Monte Carlo simulation, the numerical results demonstrate that the proposed methodology provides an accurate, convergent and computationally efficient method for reliability-analysis based finite element modeling engineering practice.

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This report compares the energy use, oil use and emissions of electric vehicles (EVs) with those of conventional, gasoline- powered vehicles (CVs) over the total life cycle of the vehicles. The various stages included in the vehicles` life cycles include vehicle manufacture, fuel production, and vehicle operation. Disposal is not included. An inventory of the air emissions associated with each stage of the life cycle is estimated. Water pollutants and solid wastes are reported for individual processes, but no comprehensive inventory is developed. Volume II contains additional details on the vehicle, utility, and materials analyses and discusses several details ofmore » the methodology.« less

Verifying the UK N_{2}O emission inventory with tall tower measurements

NASA Astrophysics Data System (ADS)

Carnell, Ed; Meneguz, Elena; Skiba, Ute; Misselbrook, Tom; Cardenas, Laura; Arnold, Tim; Manning, Alistair; Dragosits, Ulli

2016-04-01

Nitrous oxide (N2O) is a key greenhouse gas (GHG), with a global warming potential ˜300 times greater than that of CO2. N2O is emitted from a variety of sources, predominantly from agriculture. Annual UK emission estimates are reported, to comply with government commitments under the United Nations Framework Convention on Climate Change (UNFCCC). The UK N2O inventory follows internationally agreed protocols and emission estimates are derived by applying emission factors to estimates of (anthropogenic) emission sources. This approach is useful for comparing anthropogenic emissions from different countries, but does not capture regional differences and inter-annual variability associated with environmental factors (such as climate and soils) and agricultural management. In recent years, the UK inventory approach has been refined to include regional information into its emissions estimates (e.g. agricultural management data), in an attempt to reduce uncertainty. This study attempts to assess the difference between current published inventory methodology (default IPCC methodology) and a revised approach, which incorporates the latest thinking, using data from recent work. For 2013, emission estimates made using the revised approach were 30 % lower than those made using default IPCC methodology, due to the use of lower emission factors suggested by recent projects (www.ghgplatform.org.uk, Defra projects: AC0116, AC0213 and MinNO). The 2013 emissions estimates were disaggregated on a monthly basis using agricultural management (e.g. sowing dates), climate data and soil properties. The temporally disaggregated emission maps were used as input to the Met Office atmospheric dispersion model NAME, for comparison with measured N2O concentrations, at three observation stations (Tacolneston, E England; Ridge Hill, W England; Mace Head, W Ireland) in the UK DECC network (Deriving Emissions linked to Climate Change). The Mace Head site, situated on the west coast of Ireland, was used to establish baseline concentrations. The trends in the modelled data were found to fit with the observational data trends, with concentration peaks coinciding with periods of fertiliser application and land spreading of manures. The model run using the 'experimental' approach was found to give a closer agreement with the observed data.

10 CFR 300.9 - Reporting and recordkeeping requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... these guidelines, all reports must conform to the measurement methods established by the Technical... justification. (3) If a change in calculation methods (for inventories or reductions) is made for a particular year, the reporting entity must, if feasible, revise its base value to assure methodological...

10 CFR 300.9 - Reporting and recordkeeping requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... these guidelines, all reports must conform to the measurement methods established by the Technical... justification. (3) If a change in calculation methods (for inventories or reductions) is made for a particular year, the reporting entity must, if feasible, revise its base value to assure methodological...

10 CFR 300.9 - Reporting and recordkeeping requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... these guidelines, all reports must conform to the measurement methods established by the Technical... justification. (3) If a change in calculation methods (for inventories or reductions) is made for a particular year, the reporting entity must, if feasible, revise its base value to assure methodological...

10 CFR 300.9 - Reporting and recordkeeping requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... these guidelines, all reports must conform to the measurement methods established by the Technical... justification. (3) If a change in calculation methods (for inventories or reductions) is made for a particular year, the reporting entity must, if feasible, revise its base value to assure methodological...

10 CFR 300.9 - Reporting and recordkeeping requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... these guidelines, all reports must conform to the measurement methods established by the Technical... justification. (3) If a change in calculation methods (for inventories or reductions) is made for a particular year, the reporting entity must, if feasible, revise its base value to assure methodological...

Training and Farmers' Organizations' Performance

ERIC Educational Resources Information Center

Miiro, Richard F.; Matsiko, Frank B.; Mazur, Robert E.

2014-01-01

Purpose: This study sought to determine the influence of training transfer factors and actual application of training on organization level outcomes among farmer owned produce marketing organizations in Uganda. Design/methodology/approach: Interviews based on the Learning Transfer Systems Inventory (LTSI) were conducted with 120 PMO leaders…

Load capacity of hollowed timber piles.

DOT National Transportation Integrated Search

1998-12-01

The goal of this study was to develop a reliable load-rating methodology for timber piles based on the level of documented damage. Louisiana currently has over 4,000 timber bridges in its inventory of over 13,800 bridges. A quarter of these 4,000 tim...

Current Methodologies in Preparing Mobile Source Port-Related Emission Inventories Final Report April 2009

EPA Pesticide Factsheets

This report focuses on mobile emission sources at ports, including oceangoing vessels (OGVs), harbor craft, and cargo handling equipment (CHE), as well as other land-side mobile emission sources at ports, such as locomotives and on-highway vehicles.

The factor structure of the Values in Action Inventory of Strengths (VIA-IS): An item-level exploratory structural equation modeling (ESEM) bifactor analysis.

PubMed

Ng, Vincent; Cao, Mengyang; Marsh, Herbert W; Tay, Louis; Seligman, Martin E P

2017-08-01

The factor structure of the Values in Action Inventory of Strengths (VIA-IS; Peterson & Seligman, 2004) has not been well established as a result of methodological challenges primarily attributable to a global positivity factor, item cross-loading across character strengths, and questions concerning the unidimensionality of the scales assessing character strengths. We sought to overcome these methodological challenges by applying exploratory structural equation modeling (ESEM) at the item level using a bifactor analytic approach to a large sample of 447,573 participants who completed the VIA-IS with all 240 character strengths items and a reduced set of 107 unidimensional character strength items. It was found that a 6-factor bifactor structure generally held for the reduced set of unidimensional character strength items; these dimensions were justice, temperance, courage, wisdom, transcendence, humanity, and an overarching general factor that is best described as dispositional positivity. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

External Correlates of the MMPI-2 Content Component Scales in Mental Health Inpatients

ERIC Educational Resources Information Center

Green, Bradley A.; Handel, Richard W.; Archer, Robert P.

2006-01-01

External correlates of the Minnesota Multiphasic Personality Inventory-2 (MMPI-2) Content Component Scales were identified using an inpatient sample of 544 adults. The Brief Psychiatric Rating Scale (BPRS) and Symptom Checklist 90-Revised (SCL-90-R) produced correlates of the Content Component Scales, demonstrating external validity with…

CARBON CONTAINING COMPONENT OF THE LOS ANGELES AEROSOL: SOURCE APPORTIONMENT AND CONTRIBUTIONS TO THE VISIBILITY BUDGET

EPA Science Inventory

Source resolution of the organic component of the fine fraction of the ambient aerosol (d(sub p) < 3.5 micrometers) has been carried out by combining source information from the organic component with thermal analysis and local emission inventories. The primary and secondary carb...

Comparative analysis of the life cycle impact assessment of available cement inventories in the EU

DOE Office of Scientific and Technical Information (OSTI.GOV)

Josa, Alejandro; Aguado, Antonio; Cardim, Arnaldo

Life cycle impact assessment (LCIA) is one of basic steps in life cycle assessment methodology (LCA). This paper presents a comparative study of the LCIA of different life cycle inventories (LCI) for EU cements. The analysis unit used is the manufacture of 1 kg of cement, from 'cradle to gate'. The impact categories considered are those resulting from the manufacture of cement and include greenhouse effects, acidification, eutrophication and summer and winter smog, amongst others. The results of the study highlighted some inconsistencies in existing inventories. As for the LCIA, the main environmental interventions related to cement manufacture were classifiedmore » and characterised and their effect on different impact categories analysed. Differences observed in evaluation of the impact of cement type were essentially related to their clinker content.« less

Urban Earthquake Shaking and Loss Assessment

NASA Astrophysics Data System (ADS)

Hancilar, U.; Tuzun, C.; Yenidogan, C.; Zulfikar, C.; Durukal, E.; Erdik, M.

2009-04-01

This study, conducted under the JRA-3 component of the EU NERIES Project, develops a methodology and software (ELER) for the rapid estimation of earthquake shaking and losses the Euro-Mediterranean region. This multi-level methodology developed together with researchers from Imperial College, NORSAR and ETH-Zurich is capable of incorporating regional variability and sources of uncertainty stemming from ground motion predictions, fault finiteness, site modifications, inventory of physical and social elements subjected to earthquake hazard and the associated vulnerability relationships. GRM Risk Management, Inc. of Istanbul serves as sub-contractor tor the coding of the ELER software. The methodology encompasses the following general steps: 1. Finding of the most likely location of the source of the earthquake using regional seismotectonic data base and basic source parameters, and if and when possible, by the estimation of fault rupture parameters from rapid inversion of data from on-line stations. 2. Estimation of the spatial distribution of selected ground motion parameters through region specific ground motion attenuation relationships and using shear wave velocity distributions.(Shake Mapping) 4. Incorporation of strong ground motion and other empirical macroseismic data for the improvement of Shake Map 5. Estimation of the losses (damage, casualty and economic) at different levels of sophistication (0, 1 and 2) that commensurate with the availability of inventory of human built environment (Loss Mapping) Level 2 analysis of the ELER Software (similar to HAZUS and SELENA) is essentially intended for earthquake risk assessment (building damage, consequential human casualties and macro economic loss quantifiers) in urban areas. The basic Shake Mapping is similar to the Level 0 and Level 1 analysis however, options are available for more sophisticated treatment of site response through externally entered data and improvement of the shake map through incorporation of accelerometric and other macroseismic data (similar to the USGS ShakeMap System). The building inventory data for the Level 2 analysis will consist of grid (geo-cell) based urban building and demographic inventories. For building grouping the European building typology developed within the EU-FP5 RISK-EU project is used. The building vulnerability/fragility relationships to be used can be user selected from a list of applicable relationships developed on the basis of a comprehensive study, Both empirical and analytical relationships (based on the Coefficient Method, Equivalent Linearization Method and the Reduction Factor Method of analysis) can be employed. Casualties in Level 2 analysis are estimated based on the number of buildings in different damaged states and the casualty rates for each building type and damage level. Modifications to the casualty rates can be used if necessary. ELER Level 2 analysis will include calculation of direct monetary losses as a result building damage that will allow for repair-cost estimations and specific investigations associated with earthquake insurance applications (PML and AAL estimations). ELER Level 2 analysis loss results obtained for Istanbul for a scenario earthquake using different techniques will be presented with comparisons using different earthquake damage assessment software. The urban earthquake shaking and loss information is intented for dissemination in a timely manner to related agencies for the planning and coordination of the post-earthquake emergency response. However the same software can also be used for scenario earthquake loss estimation, related Monte-Carlo type simulations and eathquake insurance applications.

Influence of cognitive function on quality of life in anorexia nervosa patients.

PubMed

Hamatani, Sayo; Tomotake, Masahito; Takeda, Tomoya; Kameoka, Naomi; Kawabata, Masashi; Kubo, Hiroko; Tada, Yukio; Tomioka, Yukiko; Watanabe, Shinya; Inoshita, Masatoshi; Kinoshita, Makoto; Ohta, Masashi; Ohmori, Tetsuro

2017-05-01

The purpose of this study was to elucidate determinants of quality of life (QOL) in anorexia nervosa (AN) patients. Twenty-one female patients with AN participated in the study. QOL was assessed with the 36-Item Short Form Health Survey (SF-36), and cognitive function was evaluated using the Wisconsin Card Sorting Test Keio version, the Rey Complex Figure Test, and the Social Cognition Screening Questionnaire. Clinical symptoms were evaluated with the Beck Depression Inventory-II, the State-Trait Anxiety Inventory-Form JYZ (STAI-JYZ), and the Maudsley Obsessive Compulsive Inventory. The Difficulty Maintaining Set score of the Wisconsin Card Sorting Test Keio version was negatively correlated to the SF-36 Physical Component Summary. Scores of the Beck Depression Inventory-II and the STAI-JYZ State and Trait were negatively correlated to the SF-36 Mental Component Summary (MCS), and the Central Coherence Index 30-min Delayed Recall score of the Rey Complex Figure Test was positively correlated with the MCS. Stepwise regression analysis showed that the Difficulty Maintaining Set score was an independent predictor of the Physical Component Summary and scores for Central Coherence Index 30-min Delayed Recall and the STAI-JYZ Trait-predicted MCS. These results suggest that not only trait anxiety but also poor central coherence and impaired ability to maintain new rule worsen AN patients' QOL. © 2016 The Authors. Psychiatry and Clinical Neurosciences © 2016 Japanese Society of Psychiatry and Neurology.

Low aerial imagery - an assessment of georeferencing errors and the potential for use in environmental inventory

NASA Astrophysics Data System (ADS)

Smaczyński, Maciej; Medyńska-Gulij, Beata

2017-06-01

Unmanned aerial vehicles are increasingly being used in close range photogrammetry. Real-time observation of the Earth's surface and the photogrammetric images obtained are used as material for surveying and environmental inventory. The following study was conducted on a small area (approximately 1 ha). In such cases, the classical method of topographic mapping is not accurate enough. The geodetic method of topographic surveying, on the other hand, is an overly precise measurement technique for the purpose of inventorying the natural environment components. The author of the following study has proposed using the unmanned aerial vehicle technology and tying in the obtained images to the control point network established with the aid of GNSS technology. Georeferencing the acquired images and using them to create a photogrammetric model of the studied area enabled the researcher to perform calculations, which yielded a total root mean square error below 9 cm. The performed comparison of the real lengths of the vectors connecting the control points and their lengths calculated on the basis of the photogrammetric model made it possible to fully confirm the RMSE calculated and prove the usefulness of the UAV technology in observing terrain components for the purpose of environmental inventory. Such environmental components include, among others, elements of road infrastructure, green areas, but also changes in the location of moving pedestrians and vehicles, as well as other changes in the natural environment that are not registered on classical base maps or topographic maps.

77 FR 59348 - Revisions to Page 700 of FERC Form No. 6

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-27

.... The components of an oil pipeline's rate base are governed by the Trended Original Cost Methodology... ratemaking methodology to the Trended Original Cost methodology as adopted in Opinion 154-B. The SRB was to... trended original cost methodology divides the nominal return on equity component of the cost of service...

[Comparative analysis of the efficacy of a playful-narrative program to teach mathematics at pre-school level].

PubMed

Gil Llario, M D; Vicent Catalá, Consuelo

2009-02-01

Comparative analysis of the efficacy of a playful-narrative program to teach mathematics at pre-school level. In this paper, the effectiveness of a programme comprising several components that are meant to consolidate mathematical concepts and abilities at the pre-school level is analyzed. The instructional methodology of this programme is compared to other methodologies. One-hundred 5-6 year-old children made up the sample that was distributed in the following conditions: (1) traditional methodology; (2) methodology with perceptual and manipulative components, and (3) methodology with language and playful components. Mathematical competence was assessed with the Mathematical Criterial Pre-school Test and the subtest of quantitative-numeric concepts of BADyG. Participants were evaluated before and after the academic course during which they followed one of these methodologies. The results show that the programme with language and playful components is more effective than the traditional methodology (p<.000) and also more effective than the perceptual and manipulative methodology (p<.000). Implications of the results for instructional practices are analyzed.

Vegetation resources inventory of southwest Alaska: development and application of an innovative, extensive sampling design.

Treesearch

Willem W.S. van Hees

1999-01-01

An assessment of the vegetation resources of southwest Alaska was made by using an inventory design developed by the Pacific Northwest Research Station. Satellite imagery (LANDSAT MSS), high-altitude aerial photography, and ground sampling were the major components of the design. Estimates of area for all land cover classes in the southwest region were produced....

Further Validation of the Inventory of Mental Toughness Factors in Sport (IMTF-S)

ERIC Educational Resources Information Center

Stonkus, Mark A.; Royal, Kenneth D.

2015-01-01

The purpose of this study was to provide further validation a new measure of mental toughness in sport. The Inventory of Mental Toughness Factors in Sport (IMTF-S) was originally developed and validated using principal component analysis. For the present study, the psychometric properties of the IMTF-S were again evaluated, but by way of the Rasch…

An empirical assessment of forest floor carbon stock components across the United States

Treesearch

Christopher W. Woodall; Charles H. Perry; James A. Westfall

2012-01-01

Despite its prevalent reporting in regional/national greenhouse gas inventories (NGHGI), forest floor (FF) carbon (C) stocks (including litter, humus, and fine woody debris [FWD]) have not been empirically measured using a consistent approach across forests of the US. The goal of this study was to use the first national field inventory of litter and humic layer depths...

Construction and Validation of the Career and Educational Decision Self-Efficacy Inventory for Secondary Students (CEDSIS)

ERIC Educational Resources Information Center

Ho, Esther Sui Chu; Sum, Kwok Wing

2018-01-01

This study aims to construct and validate the Career and Educational Decision Self-Efficacy Inventory for Secondary Students (CEDSIS) by using a sample of 2,631 students in Hong Kong. Principal component analysis yielded a three-factor structure, which demonstrated good model fit in confirmatory factor analysis. High reliability was found for the…

External validation of a forest inventory and analysis volume equation and comparisons with estimates from multiple stem-profile models

Treesearch

Christopher M. Oswalt; Adam M. Saunders

2009-01-01

Sound estimation procedures are desideratum for generating credible population estimates to evaluate the status and trends in resource conditions. As such, volume estimation is an integral component of the U.S. Department of Agriculture, Forest Service, Forest Inventory and Analysis (FIA) program's reporting. In effect, reliable volume estimation procedures are...

A stem-map model for predicting tree canopy cover of Forest Inventory and Analysis (FIA) plots

Treesearch

Chris Toney; John D. Shaw; Mark D. Nelson

2009-01-01

Tree canopy cover is an important stand characteristic that affects understory light, fuel moisture, decomposition rates, wind speed, and wildlife habitat. Canopy cover also is a component of most definitions of forest land used by US and international agencies. The USDA Forest Service Forest Inventory and Analysis (FIA) Program currently does not provide a national...

Mothers' questionnaire of preschoolers' language and motor skills: a validation study.

PubMed

Gudmundsson, E; Gretarsson, S J

2013-03-01

Parent questionnaires of child motor and language skills are useful in many contexts. This study validates one such measure, the Preschool Child Development Inventory (PCDI), a mother-answered standardized measure of motor (fine and gross) and language (expression and comprehension) skills of 3-6-year-old children. Eighty-one mothers answered the inventory and their children were concurrently tested on six verbal subtests of WPPSI-R(IS). The six language and motor subtests of the PCDI revealed the predicted convergent and divergent correlations with the verbal subtests of the WPPSI-R(IS). As predicted, the motor subtests diverged and the language subtests converged with the expected WPPSI-R(IS) subtests. Principal components analysis of all the measures (the PCDI and the WPPSI-R(IS) subtests) revealed two components, verbal and motor in content. The findings support the validity of a mother-answered inventory to assess language and motor development. It is pointed out that such inventories are a viable brief and cost effective alternative to individual testing, both to supplement such measures in clinical practice and as main information in research, for example on determinants of development. Some suggestions are made for future research and applications. © 2012 Blackwell Publishing Ltd.

Use of system code to estimate equilibrium tritium inventory in fusion DT machines, such as ARIES-AT and components testing facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

C.P.C. Wong; B. Merrill

2014-10-01

ITER is under construction and will begin operation in 2020. This is the first 500 MWfusion class DT device, and since it is not going to breed tritium, it will consume most of the limited supply of tritium resources in the world. Yet, in parallel, DT fusion nuclear component testing machines will be needed to provide technical data for the design of DEMO. It becomes necessary to estimate the tritium burn-up fraction and corresponding initial tritium inventory and the doubling time of these machines for the planning of future supply and utilization of tritium. With the use of a systemmore » code, tritium burn-up fraction and initial tritium inventory for steady state DT machines can be estimated. Estimated tritium burn-up fractions of FNSF-AT, CFETR-R and ARIES-AT are in the range of 1–2.8%. Corresponding total equilibrium tritium inventories of the plasma flow and tritium processing system, and with the DCLL blanket option are 7.6 kg, 6.1 kg, and 5.2 kg for ARIES-AT, CFETR-R and FNSF-AT, respectively.« less

Tungsten fiber reinforced superalloy composite high temperature component design considerations

NASA Technical Reports Server (NTRS)

Winsa, E. A.

1982-01-01

Tungsten fiber reinforced superalloy composites (TFRS) are intended for use in high temperature turbine components. Current turbine component design methodology is based on applying the experience, sometimes semiempirical, gained from over 30 years of superalloy component design. Current composite component design capability is generally limited to the methodology for low temperature resin matrix composites. Often the tendency is to treat TFRS as just another superalloy or low temperature composite. However, TFRS behavior is significantly different than that of superalloys, and the high environment adds consideration not common in low temperature composite component design. The methodology used for preliminary design of TFRS components are described. Considerations unique to TFRS are emphasized.

A hybrid life cycle inventory of nano-scale semiconductor manufacturing.

PubMed

Krishnan, Nikhil; Boyd, Sarah; Somani, Ajay; Raoux, Sebastien; Clark, Daniel; Dornfeld, David

2008-04-15

The manufacturing of modern semiconductor devices involves a complex set of nanoscale fabrication processes that are energy and resource intensive, and generate significant waste. It is important to understand and reduce the environmental impacts of semiconductor manufacturing because these devices are ubiquitous components in electronics. Furthermore, the fabrication processes used in the semiconductor industry are finding increasing application in other products, such as microelectromechanical systems (MEMS), flat panel displays, and photovoltaics. In this work we develop a library of typical gate-to-gate materials and energy requirements, as well as emissions associated with a complete set of fabrication process models used in manufacturing a modern microprocessor. In addition, we evaluate upstream energy requirements associated with chemicals and materials using both existing process life cycle assessment (LCA) databases and an economic input-output (EIO) model. The result is a comprehensive data set and methodology that may be used to estimate and improve the environmental performance of a broad range of electronics and other emerging applications that involve nano and micro fabrication.

Rapid earthquake hazard and loss assessment for Euro-Mediterranean region

NASA Astrophysics Data System (ADS)

Erdik, Mustafa; Sesetyan, Karin; Demircioglu, Mine; Hancilar, Ufuk; Zulfikar, Can; Cakti, Eser; Kamer, Yaver; Yenidogan, Cem; Tuzun, Cuneyt; Cagnan, Zehra; Harmandar, Ebru

2010-10-01

The almost-real time estimation of ground shaking and losses after a major earthquake in the Euro-Mediterranean region was performed in the framework of the Joint Research Activity 3 (JRA-3) component of the EU FP6 Project entitled "Network of Research Infra-structures for European Seismology, NERIES". This project consists of finding the most likely location of the earthquake source by estimating the fault rupture parameters on the basis of rapid inversion of data from on-line regional broadband stations. It also includes an estimation of the spatial distribution of selected site-specific ground motion parameters at engineering bedrock through region-specific ground motion prediction equations (GMPEs) or physical simulation of ground motion. By using the Earthquake Loss Estimation Routine (ELER) software, the multi-level methodology developed for real time estimation of losses is capable of incorporating regional variability and sources of uncertainty stemming from GMPEs, fault finiteness, site modifications, inventory of physical and social elements subjected to earthquake hazard and the associated vulnerability relationships.

Dealing with Emergy Algebra in the Life Cycle Assessment Framework

EPA Science Inventory

The Life Cycle Inventory (LCI) represents one of the four steps of the Life Cycle Assessment (LCA) methodology, which is a standardized procedure (ISO 14040:2006) to estimate the environmental impacts generated by the production, use and disposal of goods and services. In this co...

Developing a Research Agenda for Assisted Living

ERIC Educational Resources Information Center

Kane, Rosalie A.; Wilson, Keren Brown; Spector, William

2007-01-01

Purpose: We describe an approach to identifying knowledge gaps, research questions, and methodological issues for assisted living (AL) research. Design and Methods: We undertook an inventory of AL literature and research in progress and commissioned background papers critiquing knowledge on selected subtopics. With an advisory committee, we…

Conflict Management Styles of Turkish Managers

ERIC Educational Resources Information Center

Ozkalp, Enver; Sungur, Zerrin; Ozdemir, Aytul Ayse

2009-01-01

Purpose: The aim of this study is to determine Turkish managers conflict styles in different sectors, namely durable consumer goods, aviation, automotive and banking. Design/methodology/approach: A total of 130 managers conflict management styles were assessed by applying the Rahim's 1983 Organizational Conflict Inventory-II. Findings: First,…

IPCC Methodologies for the Waste Sector: Past, Present, and Future

USDA-ARS?s Scientific Manuscript database

The reporting of national greenhouse gas (GHG) emissions began more than a decade ago by the signatory countries of the United Nations Framework Convention on Climate Change (UNFCCC). National GHG inventories rely on the evolving Intergovernmental Panel on Climate Change (IPCC) national GHG inventor...

Developing high-resolution urban scale heavy-duty truck emission inventory using the data-driven truck activity model output

NASA Astrophysics Data System (ADS)

Perugu, Harikishan; Wei, Heng; Yao, Zhuo

2017-04-01

Air quality modelers often rely on regional travel demand models to estimate the vehicle activity data for emission models, however, most of the current travel demand models can only output reliable person travel activity rather than goods/service specific travel activity. This paper presents the successful application of data-driven, Spatial Regression and output optimization Truck model (SPARE-Truck) to develop truck-related activity inputs for the mobile emission model, and eventually to produce truck specific gridded emissions. To validate the proposed methodology, the Cincinnati metropolitan area in United States was selected as a case study site. From the results, it is found that the truck miles traveled predicted using traditional methods tend to underestimate - overall 32% less than proposed model- truck miles traveled. The coefficient of determination values for different truck types range between 0.82 and 0.97, except the motor homes which showed least model fit with 0.51. Consequently, the emission inventories calculated from the traditional methods were also underestimated i.e. -37% for NOx, -35% for SO2, -43% for VOC, -43% for BC, -47% for OC and - 49% for PM2.5. Further, the proposed method also predicted within ∼7% of the national emission inventory for all pollutants. The bottom-up gridding methodology used in this paper could allocate the emissions to grid cell where more truck activity is expected, and it is verified against regional land-use data. Most importantly, using proposed method it is easy to segregate gridded emission inventory by truck type, which is of particular interest for decision makers, since currently there is no reliable method to test different truck-category specific travel-demand management strategies for air pollution control.

Coupling Computer-Aided Process Simulation and ...

EPA Pesticide Factsheets

A methodology is described for developing a gate-to-gate life cycle inventory (LCI) of a chemical manufacturing process to support the application of life cycle assessment in the design and regulation of sustainable chemicals. The inventories were derived by first applying process design and simulation of develop a process flow diagram describing the energy and basic material flows of the system. Additional techniques developed by the U.S. Environmental Protection Agency for estimating uncontrolled emissions from chemical processing equipment were then applied to obtain a detailed emission profile for the process. Finally, land use for the process was estimated using a simple sizing model. The methodology was applied to a case study of acetic acid production based on the Cativa tm process. The results reveal improvements in the qualitative LCI for acetic acid production compared to commonly used databases and top-down methodologies. The modeling techniques improve the quantitative LCI results for inputs and uncontrolled emissions. With provisions for applying appropriate emission controls, the proposed method can provide an estimate of the LCI that can be used for subsequent life cycle assessments. As part of its mission, the Agency is tasked with overseeing the use of chemicals in commerce. This can include consideration of a chemical's potential impact on health and safety, resource conservation, clean air and climate change, clean water, and sustainable

Calibration and Application of FOREST-BGC in NorthWestern of Portugal

NASA Astrophysics Data System (ADS)

Rodrigues, M. A.; Lopes, D. M.; Leite, M. S.; Tabuada, V. M.

2010-05-01

Net primary production (NPP) is one of the most important variables in terms of ecosystems inventory and management, because it quantifies its growth and reflects the impact of biotic and abiotic factors, which could affect it. Interest in NP has increased recently because of the increasing interesting in climate change and the need in understanding its impact on the environment. There are ecophysiologic models, as Forest-BGC that allow for estimating NPP. The types of models offer a possible methodology to test these phenomena, beyond temporal and spatial scales, not available with tradicional inventory methodologies. To analyze the Forest-BGC performance, NPP data obtained with model were compared with collected data in the field, in the same sampling plots. For a parameterization and validation of the FOREST-BGC, this study was carried on based on 500m2 sampling plots from the National Forest Inventory 2006 and are located in several County Halls of the district of Vila Real, Portugal (Montalegre, Chaves, Valpaços, Boticas, Vila Pouca de Aguiar, Murça, Mondim de Basto, Alijó, Sabrosa and Vila Real). In order to quantify Biomass dinamics, we have selected 45 sampling plots: 19 from Pinus pinaster stands, 17 from Quercus pyreneica and 10 from mixed of Quercus with Pinus. Adaptation strategies for climate change impacts can be proposed based on these research results.

Reducing uncertainty for estimating forest carbon stocks and dynamics using integrated remote sensing, forest inventory and process-based modeling

NASA Astrophysics Data System (ADS)

Poulter, B.; Ciais, P.; Joetzjer, E.; Maignan, F.; Luyssaert, S.; Barichivich, J.

2015-12-01

Accurately estimating forest biomass and forest carbon dynamics requires new integrated remote sensing, forest inventory, and carbon cycle modeling approaches. Presently, there is an increasing and urgent need to reduce forest biomass uncertainty in order to meet the requirements of carbon mitigation treaties, such as Reducing Emissions from Deforestation and forest Degradation (REDD+). Here we describe a new parameterization and assimilation methodology used to estimate tropical forest biomass using the ORCHIDEE-CAN dynamic global vegetation model. ORCHIDEE-CAN simulates carbon uptake and allocation to individual trees using a mechanistic representation of photosynthesis, respiration and other first-order processes. The model is first parameterized using forest inventory data to constrain background mortality rates, i.e., self-thinning, and productivity. Satellite remote sensing data for forest structure, i.e., canopy height, is used to constrain simulated forest stand conditions using a look-up table approach to match canopy height distributions. The resulting forest biomass estimates are provided for spatial grids that match REDD+ project boundaries and aim to provide carbon estimates for the criteria described in the IPCC Good Practice Guidelines Tier 3 category. With the increasing availability of forest structure variables derived from high-resolution LIDAR, RADAR, and optical imagery, new methodologies and applications with process-based carbon cycle models are becoming more readily available to inform land management.

Methodology Evaluation Framework for Component-Based System Development.

ERIC Educational Resources Information Center

Dahanayake, Ajantha; Sol, Henk; Stojanovic, Zoran

2003-01-01

Explains component-based development (CBD) for distributed information systems and presents an evaluation framework, which highlights the extent to which a methodology is component oriented. Compares prominent CBD methods, discusses ways of modeling, and suggests that this is a first step towards a components-oriented systems development…

Different approaches to assess the environmental performance of a cow manure biogas plant

NASA Astrophysics Data System (ADS)

Torrellas, Marta; Burgos, Laura; Tey, Laura; Noguerol, Joan; Riau, Victor; Palatsi, Jordi; Antón, Assumpció; Flotats, Xavier; Bonmatí, August

2018-03-01

In intensive livestock production areas, farmers must apply manure management systems to comply with governmental regulations. Biogas plants, as a source of renewable energy, have the potential to reduce environmental impacts comparing with other manure management practices. Nevertheless, manure processing at biogas plants also incurs in non-desired gas emissions that should be considered. At present, available emission calculation methods cover partially emissions produced at a biogas plant, with the subsequent difficulty in the preparation of life cycle inventories. The objective of this study is to characterise gaseous emissions: ammonia (NH3-N), methane (CH4), nitrous oxide (N2Oindirect, and N2Odirect) and hydrogen sulphide (H2S) from the anaerobic co-digestion of cow manure by using different approaches for preparing gaseous emission inventories, and to compare the different methodologies used. The chosen scenario for the study is a biogas plant located next to a dairy farm in the North of Catalonia, Spain. Emissions were calculated by two methods: field measurements and estimation, following international guidelines. International Panel on Climate Change (IPCC) guidelines were adapted to estimate emissions for the specific situation according to Tier 1, Tier 2 and Tier 3 approaches. Total air emissions at the biogas plant were calculated from the emissions produced at the three main manure storage facilities on the plant: influent storage, liquid fraction storage, and the solid fraction storage of the digestate. Results showed that most of the emissions were produced in the liquid fraction storage. Comparing measured emissions with estimated emissions, NH3, CH4, N2Oindirect and H2S total emission results were in the same order of magnitude for both methodologies, while, N2Odirect total measured emissions were one order of magnitude higher than the estimates. A Monte Carlo analysis was carried out to examine the uncertainties of emissions determined from experimental data, providing probability distribution functions. Four emission inventories were developed with the different methodologies used. Estimation methods proved to be a useful tool to determine emissions when field sampling is not possible. Nevertheless, it was not possible to establish which methodology is more reliable. Therefore, more measurements at different biogas plants should be evaluated to validate the methodologies more precisely.

Psychometric properties of the Interpersonal Relationship Inventory-Short Form for active duty female service members.

PubMed

Nayback-Beebe, Ann M; Yoder, Linda H

2011-06-01

The Interpersonal Relationship Inventory-Short Form (IPRI-SF) has demonstrated psychometric consistency across several demographic and clinical populations; however, it has not been psychometrically tested in a military population. The purpose of this study was to psychometrically evaluate the reliability and component structure of the IPRI-SF in active duty United States Army female service members (FSMs). The reliability estimates were .93 for the social support subscale and .91 for the conflict subscale. Principal component analysis demonstrated an obliquely rotated three-component solution that accounted for 58.9% of the variance. The results of this study support the reliability and validity of the IPRI-SF for use in FSMs; however, a three-factor structure emerged in this sample of FSMs post-deployment that represents "cultural context." Copyright © 2011 Wiley Periodicals, Inc.

Characterizing forest composition of the Allegheny Mountains using extensive forest inventory data

Treesearch

W. H. McWilliams; R. Riemann Hershey; D. A. Drake; C. L. Alerich

1993-01-01

There is a general lack of information that describes forest composition at the landscape level, e.g. for entire physiographic provinces. Studies in the ecological literature usually are local in scope and combining data from such studies is questionable due to different design methodology.

Developing a New Field-Validated Methodology for Landfill Methane Emissions in California

USDA-ARS?s Scientific Manuscript database

This project was initiated in the US by the California Energy Commission (CEC) in cooperation with the California Integrated Waste Management Board (CIWMB) to develop improved methods for landfill methane emissions for the California greenhouse gas inventory. This 3-year project (2007-2010) is devel...

77 FR 14482 - Petroleum Reduction and Alternative Fuel Consumption Requirements for Federal Fleets

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-12

... agencies to use this methodology to determine fleet inventory targets and to prepare fleet management plans.... Department of Energy, Office of Energy Efficiency and Renewable Energy, Federal Energy Management Program (EE... DOE receives will be made available on the Federal Energy Management Program's Federal Fleet...

Factors Influencing Continuing Professional Development: A Delphi Study among Nursing Experts

ERIC Educational Resources Information Center

Brekelmans, Gerard; Poell, Rob F.; van Wijk, Kees

2013-01-01

Purpose: The aim of this paper is to present an inventory of expert opinions on the factors that influence the participation of registered nurses in continuing professional development (CPD) activities. Design/methodology/approach: A Delphi study was conducted among 38 Dutch experts (nursing employers, managers, education institutions, and…

Testing Crites' Model of Career Maturity: A Hierarchical Strategy.

ERIC Educational Resources Information Center

Wallbrown, Fred H.; And Others

1986-01-01

Investigated the construct validity of Crites' model of career maturity and the Career Maturity Inventory (CMI). Results from a nationwide sample of adolescents, using hierarchical factor analytic methodology, indicated confirmatory support for the multidimensionality of Crites' model of career maturity, and the construct validity of the CMI as a…

Construct Definition Methodology and Generalizability Theory Applied to Career Education Measurement.

ERIC Educational Resources Information Center

Stenner, A. Jackson; Rohlf, Richard J.

The merits of generalizability theory in the formulation of construct definitions and in the determination of reliability estimates are discussed. The broadened conceptualization of reliability brought about by Cronbach's generalizability theory is reviewed. Career Maturity Inventory data from a sample of 60 ninth grade students is used to…

LIFE CYCLE DESIGN OF AIR INTAKE MANIFOLDS; PHASE I: 2.0 L FORD CONTOUR AIR INTAKE MANIFOLD

EPA Science Inventory

The project team applied the life cycle design methodology to the design analysis of three alternative air intake manifolds: a sand cast aluminum, brazed aluminum tubular, and nylon composite. The design analysis included a life cycle inventory analysis, environmental regulatory...

Estimating forest characteristics using NAIP imagery and ArcObjects

Treesearch

John S Hogland; Nathaniel M. Anderson; Woodam Chung; Lucas Wells

2014-01-01

Detailed, accurate, efficient, and inexpensive methods of estimating basal area, trees, and aboveground biomass per acre across broad extents are needed to effectively manage forests. In this study we present such a methodology using readily available National Agriculture Imagery Program imagery, Forest Inventory Analysis samples, a two stage classification and...

Organizing the Diagnostics of Multicultural Personality in College Students

ERIC Educational Resources Information Center

Begaliyeva, Saule; Issabekova, Gulnur; Saudabaeva, Gulmira; Zhanna, Axakalova; Abdildaev, Abdikhalyk Kosherbayuly

2016-01-01

The aim of present study is to reveal the actual state of multicultural personality development in college students, based on a specially selected diagnostic inventory. The problem of multicultural personality development on the level of present pedagogics development allows taking the leading methodologic theories and approaches as the bases.…

Simplified bridge load rating methodology using the national bridge inventory file : user manual

DOT National Transportation Integrated Search

1988-08-01

The purpose of this research was to develop a computerized system to determine the adequacy of a bridge or group of bridges to carry specified overload vehicles. The system utilizes two levels of analysis. The Level 1 analysis is the basic rating sys...

Simplified bridge load rating methodology using the national bridge inventory file : program listing

DOT National Transportation Integrated Search

1987-08-01

The purpose of this research was to develop a computerized system to determine the adequacy of a bridge or group of bridges to carry specified overload vehicles. The system utilizes two levels of analysis. The Level 1 analysis is the basic rating sys...

Differences in Identity Style and Process: Can Less Be More

ERIC Educational Resources Information Center

Reio, Thomas G., Jr.; Portes, Pedro R.; Nixon, Casey B.

2014-01-01

This study examines relationships between identity status and process measure scores that advance our understanding of methodological characteristics in the context of gender and age. A sample of 391 adolescents and adults (215 males, 176 females) completed the Identity Style Inventory (ISI; Berzonsky, 1992) and Ego Identity Process Questionnaire…

The Nebulous, Essential Dimensions in Effective University Teaching: The Ethic of Care and Relational Acumen

ERIC Educational Resources Information Center

Scott, Donald E.

2015-01-01

This paper examines the interrelationships between teaching beliefs and approaches, instructional design, relationships with students, and academics' and students' perceptions of effective teaching and learning. Mixed methodology was utilised and included interviews with academics and students, and questionnaires, inventories, and learning…

(The Androgyny Dimension: A Comment on Stokes, Childs, and Fuehrer: And a Response.)

ERIC Educational Resources Information Center

Lubinski, David; Stokes, Joseph

1983-01-01

Suggests a critical methodological flaw in a study done about the relationship between the Bem Sex-Role Inventory and certain indices of self-disclosure (Stokes, et al.). Notes that multiple regression analysis was not performed in appropriate hierarchical fashion. Includes Stokes reply to the critique. (PAS)

Forest growth of Mississippi's north unit - A case study of the Southern Forest surveys growth estimation procedures

Treesearch

Dennis M. May

1988-01-01

This report presents the procedures by which the Southern Forest Inventory and Analysis unit estimates forest growth from permanent horizontal point samples. Inventory data from the 1977-87 survey of Mississippi's north unit were used to demonstrate how trees on the horizontal point samples are classified into one of eight components of growth and, in turn, how...

Psychometric Evaluation of the Social Problem-Solving Inventory-Revised among Overweight or Obese Adults

ERIC Educational Resources Information Center

Wang, Jing; Matthews, Judith T.; Sereika, Susan M.; Chasens, Eileen R.; Ewing, Linda J.; Burke, Lora E.

2013-01-01

Problem solving is a key component of weight loss programs. The Social Problem Solving Inventory-Revised (SPSI-R) has not been evaluated in weight loss studies. The purpose of this study was to evaluate the psychometrics of the SPSI-R. Cronbach's a (0.95 for total score; 0.67-0.92 for subscales) confirmed internal consistency reliability. The…

Comparing the STEMS and AFIS growth models with respect to the uncertainty of predictions

Treesearch

Ronald E. McRoberts; Margaret R. Holdaway; Veronica C. Lessard

2000-01-01

The uncertainty in 5-, 10-, and 20-year diameter growth predictions is estimated using Monte Carlo simulations for four Lake States tree species. Two sets of diameter growth models are used: recalibrations of the STEMS models using forest inventory and analysis data, and new growth models developed as a component of an annual forest inventory system for the North...

Integrating forest inventory and analysis data into a LIDAR-based carbon monitoring system

Treesearch

Kristofer D. Johnson; Richard Birdsey; Andrew O Finley; Anu Swantaran; Ralph Dubayah; Craig Wayson; Rachel Riemann

2014-01-01

Forest Inventory and Analysis (FIA) data may be a valuable component of a LIDAR-based carbon monitoring system, but integration of the two observation systems is not without challenges. To explore integration methods, two wall-to-wall LIDAR-derived biomass maps were compared to FIA data at both the plot and county levels in Anne Arundel and Howard Counties in Maryland...

Measuring and modeling carbon stock change estimates for US forests and uncertainties from apparent inter-annual variability

Treesearch

James E. Smith; Linda S. Heath

2015-01-01

Our approach is based on a collection of models that convert or augment the USDA Forest Inventory and Analysis program survey data to estimate all forest carbon component stocks, including live and standing dead tree aboveground and belowground biomass, forest floor (litter), down deadwood, and soil organic carbon, for each inventory plot. The data, which include...

Psychometric Evaluation of the Theory of Mind Inventory (ToMI): A Study of Typically Developing Children and Children with Autism Spectrum Disorder

ERIC Educational Resources Information Center

Hutchins, Tiffany L.; Prelock, Patricia A.; Bonazinga, Laura

2012-01-01

Two studies examined the psychometric properties of the Theory of Mind Inventory (ToMI). In Study One, 135 caregivers completed the ToMI for children (ages 3 through 17) with autism spectrum disorder (ASD). Findings revealed excellent test-retest reliability and internal consistency. Principle Components Analysis revealed three subscales related…

Development of the MCNPX depletion capability: A Monte Carlo linked depletion method that automates the coupling between MCNPX and CINDER90 for high fidelity burnup calculations

NASA Astrophysics Data System (ADS)

Fensin, Michael Lorne

Monte Carlo-linked depletion methods have gained recent interest due to the ability to more accurately model complex 3-dimesional geometries and better track the evolution of temporal nuclide inventory by simulating the actual physical process utilizing continuous energy coefficients. The integration of CINDER90 into the MCNPX Monte Carlo radiation transport code provides a high-fidelity completely self-contained Monte-Carlo-linked depletion capability in a well established, widely accepted Monte Carlo radiation transport code that is compatible with most nuclear criticality (KCODE) particle tracking features in MCNPX. MCNPX depletion tracks all necessary reaction rates and follows as many isotopes as cross section data permits in order to achieve a highly accurate temporal nuclide inventory solution. This work chronicles relevant nuclear history, surveys current methodologies of depletion theory, details the methodology in applied MCNPX and provides benchmark results for three independent OECD/NEA benchmarks. Relevant nuclear history, from the Oklo reactor two billion years ago to the current major United States nuclear fuel cycle development programs, is addressed in order to supply the motivation for the development of this technology. A survey of current reaction rate and temporal nuclide inventory techniques is then provided to offer justification for the depletion strategy applied within MCNPX. The MCNPX depletion strategy is then dissected and each code feature is detailed chronicling the methodology development from the original linking of MONTEBURNS and MCNP to the most recent public release of the integrated capability (MCNPX 2.6.F). Calculation results of the OECD/NEA Phase IB benchmark, H. B. Robinson benchmark and OECD/NEA Phase IVB are then provided. The acceptable results of these calculations offer sufficient confidence in the predictive capability of the MCNPX depletion method. This capability sets up a significant foundation, in a well established and supported radiation transport code, for further development of a Monte Carlo-linked depletion methodology which is essential to the future development of advanced reactor technologies that exceed the limitations of current deterministic based methods.

Steamer II: Steamer prototype component inventory and user interface commands. Technical report, 1988-1989

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dickieson, J.L.; Thode, W.F.; Newbury, K.

1988-12-01

Over the last several years, Navy Personnel Research and Development has produced a prototype simulation of a 1200-psi steam plant. This simulation, called Steamer, is installed on an expensive Symbolics minicomputer at the Surface Warfare Officers School, Pacific Coronado, California. The fundamental research goal of the Steamer prototype system was to evaluate the potential of, what was then, new artificial intelligence (AI) hardware and software technology for supporting the construction of computer-based training systems using graphic representations of complex, dynamic systems. The area of propulsion engineering was chosen for a number of reasons. This document describes the Steamer prototype systemmore » components and user interface commands and establishes a starting point for designing, developing, and implementing Steamer II. Careful examination of the actual program code produced an inventory that describes the hardware, system software, application software, and documentation for the Steamer prototype system. Exercising all menu options systematically produced an inventory of all Steamer prototype user interface commands.« less

Inventory of File gfs.t06z.pgrb2.0p25.anl

Science.gov Websites

UGRD analysis U-Component of Wind [m/s] 005 10 mb VGRD analysis V-Component of Wind [m/s] 006 10 mb -Component of Wind [m/s] 011 20 mb VGRD analysis V-Component of Wind [m/s] 012 20 mb ABSV analysis Absolute UGRD analysis U-Component of Wind [m/s] 018 30 mb VGRD analysis V-Component of Wind [m/s] 019 30 mb

Inventory of File gfs.t06z.pgrb2.0p50.anl

Science.gov Websites

UGRD analysis U-Component of Wind [m/s] 005 10 mb VGRD analysis V-Component of Wind [m/s] 006 10 mb -Component of Wind [m/s] 011 20 mb VGRD analysis V-Component of Wind [m/s] 012 20 mb ABSV analysis Absolute UGRD analysis U-Component of Wind [m/s] 018 30 mb VGRD analysis V-Component of Wind [m/s] 019 30 mb

The AVI project: A bibliographical and archive inventory of landslides and floods in Italy

NASA Astrophysics Data System (ADS)

Guzzetti, Fausto; Cardinali, Mauro; Reichenbach, Paola

1994-07-01

The AVI project was commissioned by the Minister of Civil Protection to the National Group for Prevention of Hydrogeologic Hazards to complete an inventory of areas historically affected by landslides and floods in Italy. More than 300 people, divided into 15 research teams and two support groups, worked for one year on the project. Twenty-two journals were systematically searched for the period 1918 1990, 350,000 newspaper issues were screened, and 39,953 articles were collected. About 150 experts on mass movement and floods were interviewed and 1482 published and unpublished technical and scientific reports were reviewed. The results of the AVI project, in spite of the limitations, represent the most comprehensive archiving of mass movement and floods ever prepared in Italy. The type and quality of the information collected and the methodologies and techniques used to make the inventory are discussed. Possible applications and future developments are also presented.

THE DEVELOPMENT OF A 1990 GLOBAL INVENTORY FOR SO(X) AND NO(X) ON A 1(DEGREE) X 1(DEGREE) LATITUDE-LONGITUDE GRID.

DOE Office of Scientific and Technical Information (OSTI.GOV)

VAN HEYST,B.J.

1999-10-01

Sulfur and nitrogen oxides emitted to the atmosphere have been linked to the acidification of water bodies and soils and perturbations in the earth's radiation balance. In order to model the global transport and transformation of SO{sub x} and NO{sub x}, detailed spatial and temporal emission inventories are required. Benkovitz et al. (1996) published the development of an inventory of 1985 global emissions of SO{sub x} and NO{sub x} from anthropogenic sources. The inventory was gridded to a 1{degree} x 1{degree} latitude-longitude grid and has served as input to several global modeling studies. There is now a need to providemore » modelers with an update of this inventory to a more recent year, with a split of the emissions into elevated and low level sources. This paper describes the development of a 1990 update of the SO{sub x} and NO{sub x} global inventories that also includes a breakdown of sources into 17 sector groups. The inventory development starts with a gridded global default EDGAR inventory (Olivier et al, 1996). In countries where more detailed national inventories are available, these are used to replace the emissions for those countries in the global default. The gridded emissions are distributed into two height levels (0-100m and >100m) based on the final plume heights that are estimated to be typical for the various sectors considered. The sources of data as well as some of the methodologies employed to compile and develop the 1990 global inventory for SO{sub x} and NO{sub x} are discussed. The results reported should be considered to be interim since the work is still in progress and additional data sets are expected to become available.« less

What makes astronomical heritage valuable? Identifying potential Outstanding Universal Value in cultural properties relating to astronomy

NASA Astrophysics Data System (ADS)

Cotte, Michel

2015-08-01

The communication will present the today situation of astronomical and archaeo-astronomical heritage related to the World Heritage Convention along the past years till today. Some parallel events and works promoted strongly as the IAU - UNESCO initiative for the “year of astronomy” (2009). It was followed by a joint program by IAU and ICOMOS who is an official advisory body assessing the World Heritage Committee for the evaluation of nomination dossiers. Result of that works is an important publication by around 40 authors coming from 20 different countries all around the World: Heritage Sites of Astronomy and Archaeoastronomy in context of the UNESCO World Heritage Convention (2010-2011). A second volume is under preparation (2015). It was also accompanied by some initiatives like “Windows to the Universe” organisation and parallel constitution of local “Starlight Reserves”. Some regional meetings studying specific facets or regional heritage in the field giving significant knowledge progresses also accompanied global trend for astronomical heritage.WH assessment is defined by a relatively strict format and methodology. Key word is “demonstration of an Outstanding Universal Value” to justify the WH Listing by the Committee. Communication first examines requirements and evaluation practices about of the OUV demonstration for a given place in context of astronomical or archaeo-astronomical heritage. That means examination of the tangible attributes, inventory of the property in terms of unmoveable and moveable components and inventory of intangible issues related to the history (history of the place in context of the history of astronomy and cultural history). That is also related to apply to the site concept of integrity and authenticity level of the place and comparison with other similar places (WH site already listed, national WH Tentative List, other similar places in the region).Second issue of the communication is to give a glimpse on the today WH listing, inventory of some difficulties with failure sometime, and trend and promising approaches.

76 FR 24054 - Agency Information Collection Activities: Proposed Collection; Comments Requested: Registrants...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-29

... Collection; Comments Requested: Registrants Inventory of Drugs Surrendered; DEA Form 41 AGENCY: Department of...), Drug Enforcement Administration (DEA) will be submitting the following information collection request... component of the Department sponsoring the collection: Form number: DEA Form 41; component: Office of...

Methane Leakage from Oil & Gas Operations. What have we learned from recent studies in the U.S.?

NASA Astrophysics Data System (ADS)

Zavala-Araiza, Daniel; Hamburg, Steven

2016-04-01

Methane, the principal component of natural gas, is a powerful greenhouse gas. Methane losses from the natural gas supply chain erode the climate benefits of fuel switching to natural gas from other fossil fuels, reducing or eliminating them for several decades or longer. Global data on methane emissions from the oil and gas sector is uncertain and as a consequence, measuring and characterizing methane emissions is critical to the design of effective mitigation strategies. In this work, we synthesize lessons learned from dozens of U.S. studies that characterized methane emissions along each stage of the natural gas supply chain. These results are relevant to the design of methane measurement campaigns outside the U.S. A recurring theme in the research conducted in the U.S. is that public emissions inventories (e.g., The U.S. Environmental Protection Agency's National Greenhouse gas Inventory) tend to underestimate emissions for two key reasons: (1) use of non-representative emission factors and (2) inaccurate activity data (incomplete counts of facilities and equipment). Similarly, the accuracy of emission factors and the effectiveness of mitigation strategies are heavily affected by the existence of low-probability, unpredictable high emitters-which have been observed all along the supply chain- and are spatiotemporally variable. We conducted a coordinated campaign to measure methane emissions in a major gas producing region of the U.S. (Barnett Shale region of Texas) using a diversity of approaches. As part of this study we identified methods for effective quantification of regional fossil methane emissions using atmospheric data (through replicate mass balance flights and source apportionment using methane to ethane ratios) as well as how to build an accurate inventory that includes a statistical estimator that more rigorously captures the magnitude and frequency of high emitters. We found agreement between large-scale atmospheric sampling estimates and source-based estimates (custom inventory). With measured oil and gas methane being roughly twice what estimates based on the U.S. Environmental Protection Agency's National Greenhouse gas Inventory would suggest. Ten percent of oil and gas facilities in the region -the high emitters or fat tail of the distribution- account for 90% of the emissions. We observed significant regional heterogeneity (e.g., local practices, technologies used, physical properties of the reservoirs) during the production, processing, transportation, and use of natural gas, describing this heterogeneity is critical to constructing accurate methane emission inventories. The lessons learned in the U.S. provide robust methodological guidelines that can be used to extend our understanding of the climatic implications of global oil and gas methane emissions with regards to, accurate quantification, reporting, and mitigation of methane emissions.

Methodology for modeling the devolatilization of refuse-derived fuel from thermogravimetric analysis of municipal solid waste components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fritsky, K.J.; Miller, D.L.; Cernansky, N.P.

1994-09-01

A methodology was introduced for modeling the devolatilization characteristics of refuse-derived fuel (RFD) in terms of temperature-dependent weight loss. The basic premise of the methodology is that RDF is modeled as a combination of select municipal solid waste (MSW) components. Kinetic parameters are derived for each component from thermogravimetric analyzer (TGA) data measured at a specific set of conditions. These experimentally derived parameters, along with user-derived parameters, are inputted to model equations for the purpose of calculating thermograms for the components. The component thermograms are summed to create a composite thermogram that is an estimate of the devolatilization for themore » as-modeled RFD. The methodology has several attractive features as a thermal analysis tool for waste fuels. 7 refs., 10 figs., 3 tabs.« less

Therapeutic horticulture in clinical depression: a prospective study of active components.

PubMed

Gonzalez, Marianne Thorsen; Hartig, Terry; Patil, Grete Grindal; Martinsen, Egil W; Kirkevold, Marit

2010-09-01

This paper is a report of a study conducted to assess change in depression severity, perceived attentional capacity and rumination (brooding) in individuals with clinical depression during a therapeutic horticulture programme and to investigate if the changes were mediated by experiences of being away and fascination. Individuals with clinical depression suffer from distortion of attention and rumination. Interventions can help to disrupt maladaptive rumination and promote restoration of depleted attentional capacity. A single-group study was conducted with a convenience sample of 28 people with clinical depression in 2009. Data were collected before, twice during, and immediately after a 12-week therapeutic horticulture programme, and at 3-month follow-up. Assessment instruments were the Beck Depression Inventory, Attentional Function Index, Brooding Scale, and Being Away and Fascination subscales from the Perceived Restorativeness Scale. Mean Beck Depression Inventory scores declined by 4.5 points during the intervention (F = 5.49, P = 0.002). The decline was clinically relevant for 50% of participants. Attentional Function Index scores increased (F = 4.14, P = 0.009), while Brooding scores decreased (F = 4.51, P = 0.015). The changes in Beck Depression Inventory and Attentional Function Index scores were mediated by increases in Being Away and Fascination, and decline in Beck Depression Inventory scores was also mediated by decline in Brooding. Participants maintained their improvements in Beck Depression Inventory scores at 3-month follow-up. Being away and fascination appear to work as active components in a therapeutic horticulture intervention for clinical depression.

Inventory of File sref_em.t03z.pgrb212.ctl.grib2

Science.gov Websites

UGRD analysis U-Component of Wind [m/s] 006 10 m above ground VGRD analysis V-Component of Wind [m/s of Wind [m/s] 018 250 mb VGRD analysis V-Component of Wind [m/s] 019 500 mb HGT analysis Geopotential Height [gpm] 020 500 mb UGRD analysis U-Component of Wind [m/s] 021 500 mb VGRD analysis V-Component of

Inventory of File sref_nmm.t03z.pgrb132.ctl.grib2

Science.gov Websites

UGRD analysis U-Component of Wind [m/s] 006 10 m above ground VGRD analysis V-Component of Wind [m/s of Wind [m/s] 018 250 mb VGRD analysis V-Component of Wind [m/s] 019 500 mb HGT analysis Geopotential Height [gpm] 020 500 mb UGRD analysis U-Component of Wind [m/s] 021 500 mb VGRD analysis V-Component of

Inventory of File sref_nmm.t03z.pgrb221.ctl.grib2

Science.gov Websites

UGRD analysis U-Component of Wind [m/s] 006 10 m above ground VGRD analysis V-Component of Wind [m/s of Wind [m/s] 018 250 mb VGRD analysis V-Component of Wind [m/s] 019 500 mb HGT analysis Geopotential Height [gpm] 020 500 mb UGRD analysis U-Component of Wind [m/s] 021 500 mb VGRD analysis V-Component of

Inventory of File sref_em.t03z.pgrb132.ctl.grib2

Science.gov Websites

UGRD analysis U-Component of Wind [m/s] 006 10 m above ground VGRD analysis V-Component of Wind [m/s of Wind [m/s] 018 250 mb VGRD analysis V-Component of Wind [m/s] 019 500 mb HGT analysis Geopotential Height [gpm] 020 500 mb UGRD analysis U-Component of Wind [m/s] 021 500 mb VGRD analysis V-Component of

Inventory of File sref_nmm.t03z.pgrb243.ctl.grib2

Science.gov Websites

UGRD analysis U-Component of Wind [m/s] 006 10 m above ground VGRD analysis V-Component of Wind [m/s of Wind [m/s] 018 250 mb VGRD analysis V-Component of Wind [m/s] 019 500 mb HGT analysis Geopotential Height [gpm] 020 500 mb UGRD analysis U-Component of Wind [m/s] 021 500 mb VGRD analysis V-Component of

Inventory of File sref_em.t03z.pgrb243.ctl.grib2

Science.gov Websites

UGRD analysis U-Component of Wind [m/s] 006 10 m above ground VGRD analysis V-Component of Wind [m/s of Wind [m/s] 018 250 mb VGRD analysis V-Component of Wind [m/s] 019 500 mb HGT analysis Geopotential Height [gpm] 020 500 mb UGRD analysis U-Component of Wind [m/s] 021 500 mb VGRD analysis V-Component of

Inventory of File sref_em.t03z.pgrb221.ctl.grib2

Science.gov Websites

UGRD analysis U-Component of Wind [m/s] 006 10 m above ground VGRD analysis V-Component of Wind [m/s of Wind [m/s] 018 250 mb VGRD analysis V-Component of Wind [m/s] 019 500 mb HGT analysis Geopotential Height [gpm] 020 500 mb UGRD analysis U-Component of Wind [m/s] 021 500 mb VGRD analysis V-Component of

Inventory of File sref_nmm.t03z.pgrb212.ctl.grib2

Science.gov Websites

UGRD analysis U-Component of Wind [m/s] 006 10 m above ground VGRD analysis V-Component of Wind [m/s of Wind [m/s] 018 250 mb VGRD analysis V-Component of Wind [m/s] 019 500 mb HGT analysis Geopotential Height [gpm] 020 500 mb UGRD analysis U-Component of Wind [m/s] 021 500 mb VGRD analysis V-Component of

Inventory of File sref_nmm.t03z.pgrb216.ctl.grib2

Science.gov Websites

UGRD analysis U-Component of Wind [m/s] 006 10 m above ground VGRD analysis V-Component of Wind [m/s of Wind [m/s] 018 250 mb VGRD analysis V-Component of Wind [m/s] 019 500 mb HGT analysis Geopotential Height [gpm] 020 500 mb UGRD analysis U-Component of Wind [m/s] 021 500 mb VGRD analysis V-Component of

Inventory of File sref_em.t03z.pgrb216.ctl.grib2

Science.gov Websites

UGRD analysis U-Component of Wind [m/s] 006 10 m above ground VGRD analysis V-Component of Wind [m/s of Wind [m/s] 018 250 mb VGRD analysis V-Component of Wind [m/s] 019 500 mb HGT analysis Geopotential Height [gpm] 020 500 mb UGRD analysis U-Component of Wind [m/s] 021 500 mb VGRD analysis V-Component of

Gap Analysis of Benthic Mapping at Three National Parks: Assateague Island National Seashore, Channel Islands National Park, and Sleeping Bear Dunes National Lakeshore

USGS Publications Warehouse

Rose, Kathryn V.; Nayegandhi, Amar; Moses, Christopher S.; Beavers, Rebecca; Lavoie, Dawn; Brock, John C.

2012-01-01

The National Park Service (NPS) Inventory and Monitoring (I&M) Program initiated a benthic habitat mapping program in ocean and coastal parks in 2008-2009 in alignment with the NPS Ocean Park Stewardship 2007-2008 Action Plan. With more than 80 ocean and Great Lakes parks encompassing approximately 2.5 million acres of submerged territory and approximately 12,000 miles of coastline (Curdts, 2011), this Servicewide Benthic Mapping Program (SBMP) is essential. This report presents an initial gap analysis of three pilot parks under the SBMP: Assateague Island National Seashore (ASIS), Channel Islands National Park (CHIS), and Sleeping Bear Dunes National Lakeshore (SLBE) (fig. 1). The recommended SBMP protocols include servicewide standards (for example, gap analysis, minimum accuracy, final products) as well as standards that can be adapted to fit network and park unit needs (for example, minimum mapping unit, mapping priorities). The SBMP requires the inventory and mapping of critical components of coastal and marine ecosystems: bathymetry, geoforms, surface geology, and biotic cover. In order for a park unit benthic inventory to be considered complete, maps of bathymetry and other key components must be combined into a final report (Moses and others, 2010). By this standard, none of the three pilot parks are mapped (inventoried) to completion with respect to submerged resources. After compiling the existing benthic datasets for these parks, this report has concluded that CHIS, with 49 percent of its submerged area mapped, has the most complete benthic inventory of the three. The ASIS submerged inventory is 41 percent complete, and SLBE is 17.5 percent complete.

DEMONSTRATION OF LONG-TERM STORAGE CAPABILITY FOR SPENT NUCLEAR FUEL IN L BASIN

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sindelar, R.; Deible, R.

2011-04-27

The U.S. Department of Energy decisions for the ultimate disposition of its inventory of used nuclear fuel presently in, and to be received and stored in, the L Basin at the Savannah River Site, and schedule for project execution have not been established. A logical decision timeframe for the DOE is following the review of the overall options for fuel management and disposition by the Blue Ribbon Commission on America's Nuclear Future (BRC). The focus of the BRC review is commercial fuel; however, the BRC has included the DOE fuel inventory in their review. Even though the final report bymore » the BRC to the U.S. Department of Energy is expected in January 2012, no timetable has been established for decisions by the U.S. Department of Energy on alternatives selection. Furthermore, with the imminent lay-up and potential closure of H-canyon, no ready path for fuel disposition would be available, and new technologies and/or facilities would need to be established. The fuel inventory in wet storage in the 3.375 million gallon L Basin is primarily aluminum-clad, aluminum-based fuel of the Materials Test Reactor equivalent design. An inventory of non-aluminum-clad fuel of various designs is also stored in L Basin. Safe storage of fuel in wet storage mandates several high-level 'safety functions' that would be provided by the Structures, Systems, and Components (SSCs) of the storage system. A large inventory of aluminum-clad, aluminum-based spent nuclear fuel, and other nonaluminum fuel owned by the U.S. Department of Energy is in wet storage in L Basin at the Savannah River Site. An evaluation of the present condition of the fuel, and the Structures, Systems, or Components (SSCs) necessary for its wet storage, and the present programs and storage practices for fuel management have been performed. Activities necessary to validate the technical bases for, and verify the condition of the fuel and the SSCs under long-term wet storage have also been identified. The overall conclusion is that the fuel can be stored in L Basin, meeting general safety functions for fuel storage, for an additional 50 years and possibly beyond contingent upon continuation of existing fuel management activities and several augmented program activities. It is concluded that the technical bases and well-founded technologies have been established to store spent nuclear fuel in the L Basin. Methodologies to evaluate the fuel condition and characteristics, and systems to prepare fuel, isolate damaged fuel, and maintain water quality storage conditions have been established. Basin structural analyses have been performed against present NPH criteria. The aluminum fuel storage experience to date, supported by the understanding of the effects of environmental variables on materials performance, demonstrates that storage systems that minimize degradation and provide full retrievability of the fuel up to and greater than 50 additional years will require maintaining the present management programs, and with the recommended augmented/additional activities in this report.« less

Special Analysis: Disposal of ETF Activated Carbon Vessels in Slit Trenches at the E-Area Low-Level Waste Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Collard, L.B.

2003-08-25

This Special Analysis (SA) addresses two contaminants of concern, H-3 and I-129, in three Effluent Treatment Facility (ETF) Activated Carbon Vessels awaiting disposal as solid waste. The Unreviewed Disposal Question (UDQ) evaluation listed two options for disposal of this waste, disposal as Components-in-Grout (CIG) or disposal in Slit Trenches with sealed openings to restrict release of H-3 form the vessels. Consumption of the CIG inventory limit and consumption of CIG facility volume are shown for the ETF vessels to allow easy comparison with the consumption of Slit Trench inventory limit and consumption of the Slit Trench facility volume . Themore » inventory projections are based on doubling the inventory of the three ETF vessels in the E-Area to account for the unknown inventory of three ETF vessels in the ETF. When the grout ultimately is assumed to degrade hydraulically, the water movement is not impeded as much as the release is accelerated by the presence of the grout. Under these conditions for the CIG trenches relative to the Slit Trenches, the well concentrations are higher, the inventory limit is lower and for a given inventory the inventory limit consumption is higher.« less

Data-driven systems and system-driven data: the story of the Flanders Heritage Inventory (1995-2015)

NASA Astrophysics Data System (ADS)

Van Daele, K.; Meganck, L.; Mortier, S.

2015-08-01

Over the past 20 years, heritage inventories in Flanders (Belgium) have evolved from printed books to digital inventories. It is obvious that a system that publishes a digital inventory needs to adapt to the user requirements. But, after years of working with a digital inventory system, it has become apparent that not only has the system been developed to the users needs, but also that user practice and the resulting data have been shaped by the system. Thinking about domain models and thesauri influenced our thinking about our methodology of surveying. Seeing our data projected on a common basemap led us to realise how intertwined and interdependent different types of heritage can be. The need for structured metadata has impressed upon us the need for good quality data, guaranteed by data entry standards, validation tools, and a strict editing workflow. Just as the researchers have transitioned from seeing their respective inventories as being significantly different to actually seeing the similarities between them, the information specialists have come to the realisation that there are synergies that can be achieved with other systems, both within and outside of our organisation. Deploying our inventories on the web has also changed how we communicate with the general public. Newer channels such as email and social media have enabled a more interactive way of communicating. But throughout the years, one constant has remained. While we do not expect the systems to live on, we do want the data in them to be available to future generations.

76 FR 74753 - Authority To Manufacture and Distribute Postage Evidencing Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-01

... revision of the rules governing the inventory control processes of Postage Evidencing Systems (PES... destruction or disposal of all Postage Evidencing Systems and their components to enable accurate accounting...) Postage Evidencing System repair process--any physical or electronic access to the internal components of...

Effects of Mental Practice on Tank Gunnery Performance

DTIC Science & Technology

1990-02-01

psychometrically sound measures of imagery vividness. The original 150-item inventory was shortened by Sheehan (1967), who found correlations in excess of .90...Vocational Aptitude Battery (ASVAB), which was retrieved from unit records. GT consists of three ASVAB components (Word Knowledge , Paragraph Comprehension...perceive outcomes as being dependent upon their behavior. The version of the I/E inventory used here was the 2g-item, two-alternative, forced choice test

Use of damage surveys and field inventories to evaluate oak and sugar maple health in the northern United States

Treesearch

Randall S Morin; Christopher W. Woodall; Jim Steinman; Charles H. Perry

2009-01-01

Oak species (Quercus spp.) and sugar maple (Acer saccharum) are substantial components of the forest ecosystems in the 24-state region spanning the northern U.S. During recent decades, both damage surveys and forest inventories have documented declines of sugar maple and oak health. In order to more fully assess the status of oak and sugar maple health, we examined...

A Brief Report of the Diagnostic Accuracy of Oral Reading Fluency and Reading Inventory Levels for Reading Failure Risk among Second- and Third-Grade Students

ERIC Educational Resources Information Center

Parker, David C.; Zaslofsky, Anne F.; Burns, Matthew K.; Kanive, Rebecca; Hodgson, Jennifer; Scholin, Sarah E.; Klingbeil, David A.

2015-01-01

The availability of psychometrically sound and usable universal screeners is a key component to successful early identification within a response-to-intervention model. The purpose of this study was to compare the diagnostic accuracy of oral reading fluency (ORF) and an informal reading inventory for identifying students considered at risk for…

Big sagebrush in pinyon-juniper woodlands: Using forest inventory and analysis data as a management tool for quantifying and monitoring mule deer habitat

Treesearch

Chris Witt; Paul L. Patterson

2011-01-01

We used Interior West Forest Inventory and Analysis (IW-FIA) data to identify conditions where pinyon-juniper woodlands provide security cover, thermal cover, and suitable amounts of big sagebrush (Artemisia tridentata spp.) forage to mule deer in Utah. Roughly one quarter of Utah's pinyon-juniper woodlands had a big sagebrush component in their understory....

Change detection for soil carbon in the forest inventory and analysis

Treesearch

An-Min Wu; Edward A. Nater; Charles H. Perry; Brent J. Dalzell; Barry T. Wilson

2015-01-01

Estimates of carbon stocks and stock changes in the U.S. Department of Agriculture Forest Service’s Forest Inventory and Analysis (FIA) Program are reported as the official United States submission to the UN Framework Convention on Climate Change. Soil, as a critical component of the forest carbon stocks, has been sampled in about 10-year intervals in FIA with the re-...

Timber resource statistics for the Tuxedni Bay inventory unit, Alaska, 1971

Treesearch

Karl M. Hegg

1979-01-01

Area and volume data are given for the first intensive inventory of a 188,000-acre unit on the west side of Cook Inlet, 130 miles southwest of Anchorage. Commercial forest land totaled 45 thousand acres with a total cubic volume of 105 million feet. The major species component is a hybrid mixture of Sitka and white spruce. An introductory section has comments on this...

Enhanced ant colony optimization for inventory routing problem

NASA Astrophysics Data System (ADS)

Wong, Lily; Moin, Noor Hasnah

2015-10-01

The inventory routing problem (IRP) integrates and coordinates two important components of supply chain management which are transportation and inventory management. We consider a one-to-many IRP network for a finite planning horizon. The demand for each product is deterministic and time varying as well as a fleet of capacitated homogeneous vehicles, housed at a depot/warehouse, delivers the products from the warehouse to meet the demand specified by the customers in each period. The inventory holding cost is product specific and is incurred at the customer sites. The objective is to determine the amount of inventory and to construct a delivery routing that minimizes both the total transportation and inventory holding cost while ensuring each customer's demand is met over the planning horizon. The problem is formulated as a mixed integer programming problem and is solved using CPLEX 12.4 to get the lower and upper bound (best integer) for each instance considered. We propose an enhanced ant colony optimization (ACO) to solve the problem and the built route is improved by using local search. The computational experiments demonstrating the effectiveness of our approach is presented.

Inventory of File nam.t00z.grbgrd00.tm00.grib2

Science.gov Websites

Humidity [kg/kg] 009.1 1 hybrid level UGRD analysis U-Component of Wind [m/s] 009.2 1 hybrid level VGRD analysis V-Component of Wind [m/s] 010 1 hybrid level TKE analysis Turbulent Kinetic Energy [J/kg] 011.1 2 hybrid level UGRD analysis U-Component of Wind [m/s] 011.2 2 hybrid level VGRD analysis V-Component of

Regression to fuzziness method for estimation of remaining useful life in power plant components

NASA Astrophysics Data System (ADS)

Alamaniotis, Miltiadis; Grelle, Austin; Tsoukalas, Lefteri H.

2014-10-01

Mitigation of severe accidents in power plants requires the reliable operation of all systems and the on-time replacement of mechanical components. Therefore, the continuous surveillance of power systems is a crucial concern for the overall safety, cost control, and on-time maintenance of a power plant. In this paper a methodology called regression to fuzziness is presented that estimates the remaining useful life (RUL) of power plant components. The RUL is defined as the difference between the time that a measurement was taken and the estimated failure time of that component. The methodology aims to compensate for a potential lack of historical data by modeling an expert's operational experience and expertise applied to the system. It initially identifies critical degradation parameters and their associated value range. Once completed, the operator's experience is modeled through fuzzy sets which span the entire parameter range. This model is then synergistically used with linear regression and a component's failure point to estimate the RUL. The proposed methodology is tested on estimating the RUL of a turbine (the basic electrical generating component of a power plant) in three different cases. Results demonstrate the benefits of the methodology for components for which operational data is not readily available and emphasize the significance of the selection of fuzzy sets and the effect of knowledge representation on the predicted output. To verify the effectiveness of the methodology, it was benchmarked against the data-based simple linear regression model used for predictions which was shown to perform equal or worse than the presented methodology. Furthermore, methodology comparison highlighted the improvement in estimation offered by the adoption of appropriate of fuzzy sets for parameter representation.

Discriminating Emotional Intelligence-Based Competencies of IT Employees and Salespeople

ERIC Educational Resources Information Center

Yildirim, Osman

2007-01-01

Purpose: This study aims at investigating emotional intelligence based on competencies for sales and IT people. Design/methodology/approach: A study was conducted on 111 employees of 12 firms from four different sectors in which firms benefited extensively from IT and sales activities. Findings: Emotional Competency Inventory (ECI, 2.0) was used…

Masculinity, Femininity and Androgyny: A Methodological and Theoretical Critique.

ERIC Educational Resources Information Center

Marsh, Herbert W.; Myers, Margaret

The three primary purposes of this investigation were: (1) to apply confirmatory factor analysis (CFA) to responses from three instruments--Bem Sex Role Inventory (BSRI), Comrey Personality Scales (CPS), and Australian Sex-Role Scale (ASRS)--designed to measure masculinity (M) and femininity (F); (2) to determine the correlation between M and F on…

How Teachers' Personality Affect on Their Behavioral Intention to Use Tablet PC

ERIC Educational Resources Information Center

Camadan, Fatih; Reisoglu, Ilknur; Ursavas, Ömer Faruk; Mcilroy, David

2018-01-01

Purpose: The purpose of this paper is to explore the effects of personality traits on teachers' technology acceptance. Design/methodology/approach To this end, a demographic information survey, Five-Factor inventory, and technology acceptance measure were used for data collection. The data were analyzed via structural equation modeling. Findings:…

Maintenance Resources Evaluation Technique.

DTIC Science & Technology

1999-03-01

variable Z; P-6 BIBLIOGRAPHY Argentine Air Force. Reglamento de Conduction Logistica RAC 9 (Logistics Management Regulation). Estado Mayor General de ...other hand, too many resources are expensive to acquire and maintain and difficult to transport . 1-1 Sizing the means needed to accomplish its...functional areas (maintenance, supply/inventory, transportation , etc), methodologies of operations research (simulation, mathematical programming

Optimal Diameter Growth Equations for Major Tree Species of the Midsouth

Treesearch

Don C. Bragg

2003-01-01

Optimal diameter growth equations for 60 major tree species were fit using the potential relative increment (PRI) methodology. Almost 175,000 individuals from the Midsouth (Arkansas, Louisiana, Missouri, Oklahoma, and Texas) were selected from the USDA Forest Service's Eastwide Forest Inventory Database (EFIDB). These records were then reduced to the individuals...

STUDYING THE EFFECT ON SYSTEM PREFERENCE BY VARYING CO-PRODUCT ALLOCATION IN CREATING LIFE CYCLE INVENTORY

EPA Science Inventory

How one models the input and output data for a life cycle assessment can greatly affect the results. Although much attention has been paid to allocation methodology by researchers in the field, general guidance is still lacking. Current research investigated the effect of applyin...

Preliminary results of the global forest biomass survey

Treesearch

S. Healey; E. Lindquist

2014-01-01

Many countries do not yet have well-established national forest inventories, and among those that do, significant methodological differences exist, particularly in the estimation of standing forest biomass. Global space-based LiDAR (Light Detection and Ranging) from NASA’s now-completed ICESat mission provided consistent, high-quality measures of canopy height and...

Assessing Instructional Leadership: A Longitudinal Study of New Principals

ERIC Educational Resources Information Center

Brown, Gavin T. L.; Chai, Constance

2012-01-01

Purpose: The purpose of this paper is to evaluate the psychometric properties of the Self Assessment of Leadership of Teaching and Learning (SALTAL) inventory, in conditions of repeated administration. Design/methodology/approach: In 2006 and 2007, nearly all of New Zealand's newly-appointed school principals participated in an 18 month induction…

50 CFR 86.115 - How should I administer the survey?

Code of Federal Regulations, 2014 CFR

2014-10-01

... (BIG) PROGRAM How States Will Complete Access Needs Surveys § 86.115 How should I administer the survey... methodology to collect data, which may include telephone, mail, fax, or other inventory means. We do not expect you to use automated, electronic, mechanical, or similar means of information collection. (d) Data...

50 CFR 86.115 - How should I administer the survey?

Code of Federal Regulations, 2013 CFR

2013-10-01

... (BIG) PROGRAM How States Will Complete Access Needs Surveys § 86.115 How should I administer the survey... methodology to collect data, which may include telephone, mail, fax, or other inventory means. We do not expect you to use automated, electronic, mechanical, or similar means of information collection. (d) Data...

A Sustainability Initiative to Quantify Carbon Sequestration by Campus Trees

ERIC Educational Resources Information Center

Cox, Helen M.

2012-01-01

Over 3,900 trees on a university campus were inventoried by an instructor-led team of geography undergraduates in order to quantify the carbon sequestration associated with biomass growth. The setting of the project is described, together with its logistics, methodology, outcomes, and benefits. This hands-on project provided a team of students…

The Relationship between Kolb's Learning Styles and StrengthsFinder's Talent Themes

ERIC Educational Resources Information Center

Caldwell, Adonna B.

2009-01-01

The purpose of this study was to investigate if there were relationships between college students' talent themes as defined by the Clifton StrengthsFinder(TM) Instrument and their learning style as defined by Kolb Learning Styles Inventory. Logistical regression methodology was utilized to assess the relationship between learning styles and talent…

Inventory of File sref.t03z.pgrb216.mean_3hrly.grib2

Science.gov Websites

UGRD analysis U-Component of Wind [m/s] wt ens-mean 002 10 m above ground VGRD analysis V-Component of Wind [m/s] wt ens-mean 003 1000 mb UGRD analysis U-Component of Wind [m/s] wt ens-mean 004 850 mb UGRD analysis U-Component of Wind [m/s] wt ens-mean 005 700 mb UGRD analysis U-Component of Wind [m/s] wt ens

Inventory of File sref.t03z.pgrb212.spread_3hrly.grib2

Science.gov Websites

ground UGRD analysis U-Component of Wind [m/s] std dev 002 10 m above ground VGRD analysis V-Component of Wind [m/s] std dev 003 1000 mb UGRD analysis U-Component of Wind [m/s] std dev 004 850 mb UGRD analysis U-Component of Wind [m/s] std dev 005 700 mb UGRD analysis U-Component of Wind [m/s] std dev 006 600

Inventory of File sref.t03z.pgrb243.mean_3hrly.grib2

Science.gov Websites

UGRD analysis U-Component of Wind [m/s] wt ens-mean 002 10 m above ground VGRD analysis V-Component of Wind [m/s] wt ens-mean 003 1000 mb UGRD analysis U-Component of Wind [m/s] wt ens-mean 004 850 mb UGRD analysis U-Component of Wind [m/s] wt ens-mean 005 700 mb UGRD analysis U-Component of Wind [m/s] wt ens

Inventory of File sref.t03z.pgrb216.spread_3hrly.grib2

Science.gov Websites

ground UGRD analysis U-Component of Wind [m/s] std dev 002 10 m above ground VGRD analysis V-Component of Wind [m/s] std dev 003 1000 mb UGRD analysis U-Component of Wind [m/s] std dev 004 850 mb UGRD analysis U-Component of Wind [m/s] std dev 005 700 mb UGRD analysis U-Component of Wind [m/s] std dev 006 600

Inventory of File sref.t03z.pgrb243.spread_3hrly.grib2

Science.gov Websites

ground UGRD analysis U-Component of Wind [m/s] std dev 002 10 m above ground VGRD analysis V-Component of Wind [m/s] std dev 003 1000 mb UGRD analysis U-Component of Wind [m/s] std dev 004 850 mb UGRD analysis U-Component of Wind [m/s] std dev 005 700 mb UGRD analysis U-Component of Wind [m/s] std dev 006 600

Inventory of File sref.t03z.pgrb212.mean_3hrly.grib2

Science.gov Websites

UGRD analysis U-Component of Wind [m/s] wt ens-mean 002 10 m above ground VGRD analysis V-Component of Wind [m/s] wt ens-mean 003 1000 mb UGRD analysis U-Component of Wind [m/s] wt ens-mean 004 850 mb UGRD analysis U-Component of Wind [m/s] wt ens-mean 005 700 mb UGRD analysis U-Component of Wind [m/s] wt ens

Inventory of File sref.t03z.pgrb132.spread_3hrly.grib2

Science.gov Websites

ground UGRD analysis U-Component of Wind [m/s] std dev 002 10 m above ground VGRD analysis V-Component of Wind [m/s] std dev 003 1000 mb UGRD analysis U-Component of Wind [m/s] std dev 004 850 mb UGRD analysis U-Component of Wind [m/s] std dev 005 700 mb UGRD analysis U-Component of Wind [m/s] std dev 006 600

Inventory of File sref.t03z.pgrb132.mean_3hrly.grib2

Science.gov Websites

UGRD analysis U-Component of Wind [m/s] wt ens-mean 002 10 m above ground VGRD analysis V-Component of Wind [m/s] wt ens-mean 003 1000 mb UGRD analysis U-Component of Wind [m/s] wt ens-mean 004 850 mb UGRD analysis U-Component of Wind [m/s] wt ens-mean 005 700 mb UGRD analysis U-Component of Wind [m/s] wt ens

PREDICTORS OF QUALITY OF LIFE IN 165 PATIENTS WITH ACROMEGALY: RESULTS FROM A SINGLE-CENTER STUDY.

PubMed

Kreitschmann-Andermahr, Ilonka; Buchfelder, Michael; Kleist, Bernadette; Kohlmann, Johannes; Menzel, Christa; Buslei, Rolf; Kołtowska-Häggsträm, Maria; Strasburger, Christian; Siegel, Sonja

2017-01-01

Even if treated, acromegaly has a considerable impact on patient quality of life (QoL); despite this, the exact clinical determinants of QoL in acromegaly are unknown. This study retrospectively examines a cohort of treated patients with acromegaly, with the aim of identifying these determinants. Retrospective survey analysis, with 165 patients included in the study. All patients completed a survey, which included demographic data and the clinical details of their disease, the Short Form-36 Health Survey (SF-36), the revised Beck Depression Inventory (BDI-II), and the Bern Embitterment Inventory (BEI). Stepwise regression was used to identify predictors of QoL. The strongest predictors of the physical component score of the SF-36 were (in order of declining strength of association): Delay between first presentation of the disease and diagnosis, body mass index (BMI), number of doctors visited before the diagnosis of acromegaly, and age at diagnosis. For the mental component score, the strongest predictors were: number of doctors visited, previous radiotherapy, and age at study entry; and, for the BDI-II score: number of doctors visited, previous radiotherapy, age at study entry, and employment status at the time of diagnosis. The following were predictors of the BEI score: number of doctors visited, and age at study entry. Diagnostic delay and lack of diagnostic acumen in medical care provision are strong predictors of poor QoL in patients with acromegaly. Other identified parameters are radiotherapy, age, BMI, and employment status. An efficient acromegaly service should address these aspects when devising disease management plans. BDI-II = Beck Depression Inventory II BEI = Bern Embitterment Inventory BMI = body mass index IGF-1 = insulin-like growth factor 1 MCS = mental component summary (score) PCS = physical component summary (score) QoL = quality of life SDS = standard deviation score SF-36 = Short Form-36 Health Survey.

High-resolution mapping of vehicle emissions in China in 2008

NASA Astrophysics Data System (ADS)

Zheng, B.; Huo, H.; Zhang, Q.; Yao, Z. L.; Wang, X. T.; Yang, X. F.; Liu, H.; He, K. B.

2014-09-01

This study is the first in a series of papers that aim to develop high-resolution emission databases for different anthropogenic sources in China. Here we focus on on-road transportation. Because of the increasing impact of on-road transportation on regional air quality, developing an accurate and high-resolution vehicle emission inventory is important for both the research community and air quality management. This work proposes a new inventory methodology to improve the spatial and temporal accuracy and resolution of vehicle emissions in China. We calculate, for the first time, the monthly vehicle emissions for 2008 in 2364 counties (an administrative unit one level lower than city) by developing a set of approaches to estimate vehicle stock and monthly emission factors at county-level, and technology distribution at provincial level. We then introduce allocation weights for the vehicle kilometers traveled to assign the county-level emissions onto 0.05° × 0.05° grids based on the China Digital Road-network Map (CDRM). The new methodology overcomes the common shortcomings of previous inventory methods, including neglecting the geographical differences between key parameters and using surrogates that are weakly related to vehicle activities to allocate vehicle emissions. The new method has great advantages over previous methods in depicting the spatial distribution characteristics of vehicle activities and emissions. This work provides a better understanding of the spatial representation of vehicle emissions in China and can benefit both air quality modeling and management with improved spatial accuracy.

Automatic Road Sign Inventory Using Mobile Mapping Systems

NASA Astrophysics Data System (ADS)

Soilán, M.; Riveiro, B.; Martínez-Sánchez, J.; Arias, P.

2016-06-01

The periodic inspection of certain infrastructure features plays a key role for road network safety and preservation, and for developing optimal maintenance planning that minimize the life-cycle cost of the inspected features. Mobile Mapping Systems (MMS) use laser scanner technology in order to collect dense and precise three-dimensional point clouds that gather both geometric and radiometric information of the road network. Furthermore, time-stamped RGB imagery that is synchronized with the MMS trajectory is also available. In this paper a methodology for the automatic detection and classification of road signs from point cloud and imagery data provided by a LYNX Mobile Mapper System is presented. First, road signs are detected in the point cloud. Subsequently, the inventory is enriched with geometrical and contextual data such as orientation or distance to the trajectory. Finally, semantic content is given to the detected road signs. As point cloud resolution is insufficient, RGB imagery is used projecting the 3D points in the corresponding images and analysing the RGB data within the bounding box defined by the projected points. The methodology was tested in urban and road environments in Spain, obtaining global recall results greater than 95%, and F-score greater than 90%. In this way, inventory data is obtained in a fast, reliable manner, and it can be applied to improve the maintenance planning of the road network, or to feed a Spatial Information System (SIS), thus, road sign information can be available to be used in a Smart City context.

Physics Metacognition Inventory Part II: Confirmatory factor analysis and Rasch analysis

NASA Astrophysics Data System (ADS)

Taasoobshirazi, Gita; Bailey, MarLynn; Farley, John

2015-11-01

The Physics Metacognition Inventory was developed to measure physics students' metacognition for problem solving. In one of our earlier studies, an exploratory factor analysis provided evidence of preliminary construct validity, revealing six components of students' metacognition when solving physics problems including knowledge of cognition, planning, monitoring, evaluation, debugging, and information management. The college students' scores on the inventory were found to be reliable and related to students' physics motivation and physics grade. However, the results of the exploratory factor analysis indicated that the questionnaire could be revised to improve its construct validity. The goal of this study was to revise the questionnaire and establish its construct validity through a confirmatory factor analysis. In addition, a Rasch analysis was applied to the data to better understand the psychometric properties of the inventory and to further evaluate the construct validity. Results indicated that the final, revised inventory is a valid, reliable, and efficient tool for assessing student metacognition for physics problem solving.

A Five-Year CMAQ PM2.5 Model Performance for Wildfires and Prescribed Fires

NASA Astrophysics Data System (ADS)

Wilkins, J. L.; Pouliot, G.; Foley, K.; Rappold, A.; Pierce, T. E.

2016-12-01

Biomass burning has been identified as an important contributor to the degradation of air quality because of its impact on ozone and particulate matter. Two components of the biomass burning inventory, wildfires and prescribed fires are routinely estimated in the national emissions inventory. However, there is a large amount of uncertainty in the development of these emission inventory sectors. We have completed a 5 year set of CMAQ model simulations (2008-2012) in which we have simulated regional air quality with and without the wildfire and prescribed fire inventory. We will examine CMAQ model performance over regions with significant PM2.5 and Ozone contribution from prescribed fires and wildfires. We will also review plume rise to see how it affects model bias and compare CMAQ current fire emissions input to an hourly dataset from FLAMBE.

Activation, decay heat, and waste classification studies of the European DEMO concept

NASA Astrophysics Data System (ADS)

Gilbert, M. R.; Eade, T.; Bachmann, C.; Fischer, U.; Taylor, N. P.

2017-04-01

Inventory calculations have a key role to play in designing future fusion power plants because, for a given irradiation field and material, they can predict the time evolution in chemical composition, activation, decay heat, gamma-dose, gas production, and even damage (dpa) dose. For conceptual designs of the European DEMO fusion reactor such calculations provide information about the neutron shielding requirements, maintenance schedules, and waste disposal prospects; thereby guiding future development. Extensive neutron-transport and inventory calculations have been performed for a reference DEMO reactor model with four different tritium-breeding blanket concepts. The results have been used to chart the post-operation variation in activity and decay heat from different vessel components, demonstrating that the shielding performance of the different blanket concepts—for a given blanket thickness—varies significantly. Detailed analyses of the simulated nuclide inventories for the vacuum vessel (VV) and divertor highlight the most dominant radionuclides, potentially suggesting how changes in material composition could help to reduce activity. Minor impurities in the raw composition of W used in divertor tiles, for example, are shown to produce undesirable long-lived radionuclides. Finally, waste classifications, based on UK regulations, and a recycling potential limit, have been applied to estimate the time-evolution in waste masses for both the entire vessel (including blanket modules, VV, divertor, and some ex-vessel components) and individual components, and also to suggest when a particular component might be suitable for recycling. The results indicate that the large mass of the VV will not be classifiable as low level waste on the 100 year timescale, but the majority of the divertor will be, and that both components will be potentially recyclable within that time.

Retrospective dream components and musical preferences.

PubMed

Kroth, Jerry; Lamas, Jasmin; Pisca, Nicholas; Bourret, Kristy; Kollath, Miranda

2008-08-01

Retrospective dream components endorsed on the KJP Dream Inventory were correlated with those on the Short Test of Musical Preference for 68 graduate students in counseling psychology (11 men). Among 40 correlations, 6 were significant between preferences for Heavy Metal and Dissociative avoidance dreams (.32), Dreaming that you are dreaming (.40), Dreaming that you have fallen unconscious or asleep (.41), Recurring pleasantness (.31), and Awakening abruptly from a dream (-.31); between preferences for Rap/Hip-Hop and Sexual dreams (.27); and between preferences for Jazz and Recurring pleasantness in dreams (.33). Subjects preferring Classical music reported a higher incidence of Dreams of flying (.33) and rated higher Discontentedness in dreams (-.26). The meaning of these low values awaits research based on personality inventories and full dream reports.

Inventory of File sref_nmb.t03z.pgrb221.ctl.grib2

Science.gov Websites

006 10 m above ground UGRD analysis U-Component of Wind [m/s] ENS=low-res ctl 007 10 m above ground VGRD analysis V-Component of Wind [m/s] ENS=low-res ctl 008 surface WEASD analysis Water Equivalent of -Component of Wind [m/s] ENS=low-res ctl 021 250 mb VGRD analysis V-Component of Wind [m/s] ENS=low-res ctl

Inventory of File sref_nmb.t03z.pgrb132.ctl.grib2

Science.gov Websites

006 10 m above ground UGRD analysis U-Component of Wind [m/s] ENS=low-res ctl 007 10 m above ground VGRD analysis V-Component of Wind [m/s] ENS=low-res ctl 008 surface WEASD analysis Water Equivalent of -Component of Wind [m/s] ENS=low-res ctl 021 250 mb VGRD analysis V-Component of Wind [m/s] ENS=low-res ctl

Inventory of File sref_nmb.t03z.pgrb243.ctl.grib2

Science.gov Websites

006 10 m above ground UGRD analysis U-Component of Wind [m/s] ENS=low-res ctl 007 10 m above ground VGRD analysis V-Component of Wind [m/s] ENS=low-res ctl 008 surface WEASD analysis Water Equivalent of -Component of Wind [m/s] ENS=low-res ctl 021 250 mb VGRD analysis V-Component of Wind [m/s] ENS=low-res ctl

Inventory of File SN.2012091412.grib6th.f18.grib2

Science.gov Websites

ground UGRD 18 hour fcst U-Component of Wind [m/s] 003.2 35 m above ground VGRD 18 hour fcst V-Component of Wind [m/s] 004 surface TMP 18 hour fcst Temperature [K] 005 0.5 m underground TMP 18 hour fcst ] 008.1 10 mb UGRD 18 hour fcst U-Component of Wind [m/s] 008.2 10 mb VGRD 18 hour fcst V-Component of

Inventory of File sref_nmb.t03z.pgrb216.ctl.grib2

Science.gov Websites

006 10 m above ground UGRD analysis U-Component of Wind [m/s] ENS=low-res ctl 007 10 m above ground VGRD analysis V-Component of Wind [m/s] ENS=low-res ctl 008 surface WEASD analysis Water Equivalent of -Component of Wind [m/s] ENS=low-res ctl 021 250 mb VGRD analysis V-Component of Wind [m/s] ENS=low-res ctl

Developing a Self-Scoring Comprehensive Instrument to Measure Rest's Four-Component Model of Moral Behavior: The Moral Skills Inventory.

PubMed

Chambers, David W

2011-01-01

One of the most extensively studied constructs in dental education is the four-component model of moral behavior proposed by James Rest and the set of instruments for measuring it developed by Rest, Muriel Bebeau, and others. Although significant associations have been identified between the four components Rest proposed (called here Moral Sensitivity, Moral Reasoning, Moral Integrity, and Moral Courage) and dental ethics courses and practitioners with disciplined licenses, there is no single instrument that measures all four components, and existing single component instruments require professional scoring. This article describes the development and validation of a short, self-scoring instrument, the Moral Skills Inventory, that measures all four components. Evidence of face validity, test/retest reliability, and concurrent convergent and divergent predictive validity are demonstrated in three populations: dental students, clinical dental faculty members, and regents and officers of the American College of Dentists. Significant issues remain in developing the Rest four-component model for use in dental education and practice. Specifically, further construct validation research is needed to understand the nature of the components. In particular, it remains undetermined whether moral constructs are characteristics of individuals that drive behavior in specific situations or whether particular patterns of moral behavior learned and used in response to individual circumstances are summarized by researchers and then imputed to practitioners.

Collecting and validating experiential expertise is doable but poses methodological challenges.

PubMed

Burda, Marika H F; van den Akker, Marjan; van der Horst, Frans; Lemmens, Paul; Knottnerus, J André

2016-04-01

To give an overview of important methodological challenges in collecting, validating, and further processing experiential expertise and how to address these challenges. Based on our own experiences in studying the concept, operationalization, and contents of experiential expertise, we have formulated methodological issues regarding the inventory and application of experiential expertise. The methodological challenges can be categorized in six developmental research stages, comprising the conceptualization of experiential expertise, methods to harvest experiential expertise, the validation of experiential expertise, evaluation of the effectiveness, how to translate experiential expertise into acceptable guidelines, and how to implement these. The description of methodological challenges and ways to handle those are illustrated using diabetes mellitus as an example. Experiential expertise can be defined and operationalized in terms of successful illness-related behaviors and translated into recommendations regarding life domains. Pathways have been identified to bridge the gaps between the world of patients' daily lives and the medical world. Copyright © 2016 Elsevier Inc. All rights reserved.

Historical (1750–2014) anthropogenic emissions of reactive gases and aerosols from the Community Emissions Data System (CEDS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoesly, Rachel M.; Smith, Steven J.; Feng, Leyang

Here, we present a new data set of annual historical (1750–2014) anthropogenic chemically reactive gases (CO, CH 4, NH 3, NO x, SO 2, NMVOCs), carbonaceous aerosols (black carbon – BC, and organic carbon – OC), and CO 2 developed with the Community Emissions Data System (CEDS). We improve upon existing inventories with a more consistent and reproducible methodology applied to all emission species, updated emission factors, and recent estimates through 2014. The data system relies on existing energy consumption data sets and regional and country-specific inventories to produce trends over recent decades. All emission species are consistently estimated using the samemore » activity data over all time periods. Emissions are provided on an annual basis at the level of country and sector and gridded with monthly seasonality. These estimates are comparable to, but generally slightly higher than, existing global inventories. Emissions over the most recent years are more uncertain, particularly in low- and middle-income regions where country-specific emission inventories are less available. Future work will involve refining and updating these emission estimates, estimating emissions' uncertainty, and publication of the system as open-source software.« less

Historical (1750–2014) anthropogenic emissions of reactive gases and aerosols from the Community Emissions Data System (CEDS)

DOE PAGES

Hoesly, Rachel M.; Smith, Steven J.; Feng, Leyang; ...

2018-01-29

Here, we present a new data set of annual historical (1750–2014) anthropogenic chemically reactive gases (CO, CH 4, NH 3, NO x, SO 2, NMVOCs), carbonaceous aerosols (black carbon – BC, and organic carbon – OC), and CO 2 developed with the Community Emissions Data System (CEDS). We improve upon existing inventories with a more consistent and reproducible methodology applied to all emission species, updated emission factors, and recent estimates through 2014. The data system relies on existing energy consumption data sets and regional and country-specific inventories to produce trends over recent decades. All emission species are consistently estimated using the samemore » activity data over all time periods. Emissions are provided on an annual basis at the level of country and sector and gridded with monthly seasonality. These estimates are comparable to, but generally slightly higher than, existing global inventories. Emissions over the most recent years are more uncertain, particularly in low- and middle-income regions where country-specific emission inventories are less available. Future work will involve refining and updating these emission estimates, estimating emissions' uncertainty, and publication of the system as open-source software.« less

Genetic Inventory Task Final Report. Volume 2

NASA Technical Reports Server (NTRS)

Venkateswaran, Kasthuri; LaDuc, Myron T.; Vaishampayan, Parag

2012-01-01

Contaminant terrestrial microbiota could profoundly impact the scientific integrity of extraterrestrial life-detection experiments. It is therefore important to know what organisms persist on spacecraft surfaces so that their presence can be eliminated or discriminated from authentic extraterrestrial biosignatures. Although there is a growing understanding of the biodiversity associated with spacecraft and cleanroom surfaces, it remains challenging to assess the risk of these microbes confounding life-detection or sample-return experiments. A key challenge is to provide a comprehensive inventory of microbes present on spacecraft surfaces. To assess the phylogenetic breadth of microorganisms on spacecraft and associated surfaces, the Genetic Inventory team used three technologies: conventional cloning techniques, PhyloChip DNA microarrays, and 454 tag-encoded pyrosequencing, together with a methodology to systematically collect, process, and archive nucleic acids. These three analysis methods yielded considerably different results: Traditional approaches provided the least comprehensive assessment of microbial diversity, while PhyloChip and pyrosequencing illuminated more diverse microbial populations. The overall results stress the importance of selecting sample collection and processing approaches based on the desired target and required level of detection. The DNA archive generated in this study can be made available to future researchers as genetic-inventory-oriented technologies further mature.

The North American Forest Database: going beyond national-level forest resource assessment statistics.

PubMed

Smith, W Brad; Cuenca Lara, Rubí Angélica; Delgado Caballero, Carina Edith; Godínez Valdivia, Carlos Isaías; Kapron, Joseph S; Leyva Reyes, Juan Carlos; Meneses Tovar, Carmen Lourdes; Miles, Patrick D; Oswalt, Sonja N; Ramírez Salgado, Mayra; Song, Xilong Alex; Stinson, Graham; Villela Gaytán, Sergio Armando

2018-05-21

Forests cannot be managed sustainably without reliable data to inform decisions. National Forest Inventories (NFI) tend to report national statistics, with sub-national stratification based on domestic ecological classification systems. It is becoming increasingly important to be able to report statistics on ecosystems that span international borders, as global change and globalization expand stakeholders' spheres of concern. The state of a transnational ecosystem can only be properly assessed by examining the entire ecosystem. In global forest resource assessments, it may be useful to break national statistics down by ecosystem, especially for large countries. The Inventory and Monitoring Working Group (IMWG) of the North American Forest Commission (NAFC) has begun developing a harmonized North American Forest Database (NAFD) for managing forest inventory data, enabling consistent, continental-scale forest assessment supporting ecosystem-level reporting and relational queries. The first iteration of the database contains data describing 1.9 billion ha, including 677.5 million ha of forest. Data harmonization is made challenging by the existence of definitions and methodologies tailored to suit national circumstances, emerging from each country's professional forestry development. This paper reports the methods used to synchronize three national forest inventories, starting with a small suite of variables and attributes.

Optimising multi-product multi-chance-constraint inventory control system with stochastic period lengths and total discount under fuzzy purchasing price and holding costs

NASA Astrophysics Data System (ADS)

Allah Taleizadeh, Ata; Niaki, Seyed Taghi Akhavan; Aryanezhad, Mir-Bahador

2010-10-01

While the usual assumptions in multi-periodic inventory control problems are that the orders are placed at the beginning of each period (periodic review) or depending on the inventory level they can happen at any time (continuous review), in this article, we relax these assumptions and assume that the periods between two replenishments of the products are independent and identically distributed random variables. Furthermore, assuming that the purchasing price are triangular fuzzy variables, the quantities of the orders are of integer-type and that there are space and service level constraints, total discount are considered to purchase products and a combination of back-order and lost-sales are taken into account for the shortages. We show that the model of this problem is a fuzzy mixed-integer nonlinear programming type and in order to solve it, a hybrid meta-heuristic intelligent algorithm is proposed. At the end, a numerical example is given to demonstrate the applicability of the proposed methodology and to compare its performance with one of the existing algorithms in real world inventory control problems.

Two-warehouse partial backlogging inventory model for deteriorating items with linear trend in demand under inflationary conditions

NASA Astrophysics Data System (ADS)

Jaggi, Chandra K.; Khanna, Aditi; Verma, Priyanka

2011-07-01

In today's business transactions, there are various reasons, namely, bulk purchase discounts, re-ordering costs, seasonality of products, inflation induced demand, etc., which force the buyer to order more than the warehouse capacity. Such situations call for additional storage space to store the excess units purchased. This additional storage space is typically a rented warehouse. Inflation plays a very interesting and significant role here: It increases the cost of goods. To safeguard from the rising prices, during the inflation regime, the organisation prefers to keep a higher inventory, thereby increasing the aggregate demand. This additional inventory needs additional storage space, which is facilitated by a rented warehouse. Ignoring the effects of the time value of money and inflation might yield misleading results. In this study, a two-warehouse inventory model with linear trend in demand under inflationary conditions having different rates of deterioration has been developed. Shortages at the owned warehouse are also allowed subject to partial backlogging. The solution methodology provided in the model helps to decide on the feasibility of renting a warehouse. Finally, findings have been illustrated with the help of numerical examples. Comprehensive sensitivity analysis has also been provided.

Historical (1750-2014) anthropogenic emissions of reactive gases and aerosols from the Community Emissions Data System (CEDS)

NASA Astrophysics Data System (ADS)

Hoesly, Rachel M.; Smith, Steven J.; Feng, Leyang; Klimont, Zbigniew; Janssens-Maenhout, Greet; Pitkanen, Tyler; Seibert, Jonathan J.; Vu, Linh; Andres, Robert J.; Bolt, Ryan M.; Bond, Tami C.; Dawidowski, Laura; Kholod, Nazar; Kurokawa, June-ichi; Li, Meng; Liu, Liang; Lu, Zifeng; Moura, Maria Cecilia P.; O'Rourke, Patrick R.; Zhang, Qiang

2018-01-01

We present a new data set of annual historical (1750-2014) anthropogenic chemically reactive gases (CO, CH4, NH3, NOx, SO2, NMVOCs), carbonaceous aerosols (black carbon - BC, and organic carbon - OC), and CO2 developed with the Community Emissions Data System (CEDS). We improve upon existing inventories with a more consistent and reproducible methodology applied to all emission species, updated emission factors, and recent estimates through 2014. The data system relies on existing energy consumption data sets and regional and country-specific inventories to produce trends over recent decades. All emission species are consistently estimated using the same activity data over all time periods. Emissions are provided on an annual basis at the level of country and sector and gridded with monthly seasonality. These estimates are comparable to, but generally slightly higher than, existing global inventories. Emissions over the most recent years are more uncertain, particularly in low- and middle-income regions where country-specific emission inventories are less available. Future work will involve refining and updating these emission estimates, estimating emissions' uncertainty, and publication of the system as open-source software.

What Data to Use for Forest Conservation Planning? A Comparison of Coarse Open and Detailed Proprietary Forest Inventory Data in Finland

PubMed Central

Lehtomäki, Joona; Tuominen, Sakari; Toivonen, Tuuli; Leinonen, Antti

2015-01-01

The boreal region is facing intensifying resource extraction pressure, but the lack of comprehensive biodiversity data makes operative forest conservation planning difficult. Many countries have implemented forest inventory schemes and are making extensive and up-to-date forest databases increasingly available. Some of the more detailed inventory databases, however, remain proprietary and unavailable for conservation planning. Here, we investigate how well different open and proprietary forest inventory data sets suit the purpose of conservation prioritization in Finland. We also explore how much priorities are affected by using the less accurate but open data. First, we construct a set of indices for forest conservation value based on quantitative information commonly found in forest inventories. These include the maturity of the trees, tree species composition, and site fertility. Secondly, using these data and accounting for connectivity between forest types, we investigate the patterns in conservation priority. For prioritization, we use Zonation, a method and software for spatial conservation prioritization. We then validate the prioritizations by comparing them to known areas of high conservation value. We show that the overall priority patterns are relatively consistent across different data sources and analysis options. However, the coarse data cannot be used to accurately identify the high-priority areas as it misses much of the fine-scale variation in forest structures. We conclude that, while inventory data collected for forestry purposes may be useful for forest conservation purposes, it needs to be detailed enough to be able to account for more fine-scaled features of high conservation value. These results underline the importance of making detailed inventory data publicly available. Finally, we discuss how the prioritization methodology we used could be integrated into operative forest management, especially in countries in the boreal zone. PMID:26317227

What Data to Use for Forest Conservation Planning? A Comparison of Coarse Open and Detailed Proprietary Forest Inventory Data in Finland.

PubMed

Lehtomäki, Joona; Tuominen, Sakari; Toivonen, Tuuli; Leinonen, Antti

2015-01-01

The boreal region is facing intensifying resource extraction pressure, but the lack of comprehensive biodiversity data makes operative forest conservation planning difficult. Many countries have implemented forest inventory schemes and are making extensive and up-to-date forest databases increasingly available. Some of the more detailed inventory databases, however, remain proprietary and unavailable for conservation planning. Here, we investigate how well different open and proprietary forest inventory data sets suit the purpose of conservation prioritization in Finland. We also explore how much priorities are affected by using the less accurate but open data. First, we construct a set of indices for forest conservation value based on quantitative information commonly found in forest inventories. These include the maturity of the trees, tree species composition, and site fertility. Secondly, using these data and accounting for connectivity between forest types, we investigate the patterns in conservation priority. For prioritization, we use Zonation, a method and software for spatial conservation prioritization. We then validate the prioritizations by comparing them to known areas of high conservation value. We show that the overall priority patterns are relatively consistent across different data sources and analysis options. However, the coarse data cannot be used to accurately identify the high-priority areas as it misses much of the fine-scale variation in forest structures. We conclude that, while inventory data collected for forestry purposes may be useful for forest conservation purposes, it needs to be detailed enough to be able to account for more fine-scaled features of high conservation value. These results underline the importance of making detailed inventory data publicly available. Finally, we discuss how the prioritization methodology we used could be integrated into operative forest management, especially in countries in the boreal zone.

Development of a high temporal-spatial resolution vehicle emission inventory based on NRT traffic data and its impact on air pollution in Beijing - Part 1: Development and evaluation of vehicle emission inventory

NASA Astrophysics Data System (ADS)

Jing, B. Y.; Wu, L.; Mao, H. J.; Gong, S. L.; He, J. J.; Zou, C.; Song, G. H.; Li, X. Y.; Wu, Z.

2015-10-01

As the ownership of vehicles and frequency of utilization increase, vehicle emissions have become an important source of air pollution in Chinese cities. An accurate emission inventory for on-road vehicles is necessary for numerical air quality simulation and the assessment of implementation strategies. This paper presents a bottom-up methodology based on the local emission factors, complemented with the widely used emission factors of Computer Programme to Calculate Emissions from Road Transport (COPERT) model and near real time (NRT) traffic data on road segments to develop a high temporal-spatial resolution vehicle emission inventory (HTSVE) for the urban Beijing area. To simulate real-world vehicle emissions accurately, the road has been divided into segments according to the driving cycle (traffic speed) on this road segment. The results show that the vehicle emissions of NOx, CO, HC and PM were 10.54 × 104, 42.51 × 104 and 2.13 × 104 and 0.41 × 104 Mg, respectively. The vehicle emissions and fuel consumption estimated by the model were compared with the China Vehicle Emission Control Annual Report and fuel sales thereafter. The grid-based emissions were also compared with the vehicular emission inventory developed by the macro-scale approach. This method indicates that the bottom-up approach better estimates the levels and spatial distribution of vehicle emissions than the macro-scale method, which relies on more information. Additionally, the on-road vehicle emission inventory model and control effect assessment system in Beijing, a vehicle emission inventory model, was established based on this study in a companion paper (He et al., 2015).

Identification of the odour and chemical composition of alumina refinery air emissions.

PubMed

Coffey, P S; Ioppolo-Armanios, M

2004-01-01

Alcoa World Alumina Australia has undertaken comprehensive air emissions monitoring aimed at characterising and quantifying the complete range of emissions to the atmosphere from Bayer refining of alumina at its Western Australian refineries. To the best of our knowledge, this project represents the most complete air emissions inventory of a Bayer refinery conducted in the worldwide alumina industry. It adds considerably to knowledge of air emission factors available for use in emissions estimation required under national pollutant release and transfer registers (NPRTs), such as the Toxic Releases Inventory, USA, and the National Pollutant Inventory, Australia. It also allows the preliminary identification of the key chemical components responsible for characteristic alumina refinery odours and the contribution of these components to the quality, or hedonic tone, of the odours. The strength and acceptability of refinery odours to employees and neighbours appears to be dependent upon where and in what proportion the odorous gases have been emitted from the refineries. This paper presents the results of the programme and develops a basis for classifying the odour properties of the key emission sources in the alumina-refining process.

Validation of the Rational and Experiential Multimodal Inventory in the Italian Context.

PubMed

Monacis, Lucia; de Palo, Valeria; Di Nuovo, Santo; Sinatra, Maria

2016-08-01

The unfavorable relations of the Rational and Experiential Inventory Experiential scale with objective criterion measures and its limited content validity led Norris and Epstein to propose a more content-valid measure of the experiential thinking style, the Rational and Experiential Multimodal Inventory (REIm), in order to assess the several facets of a broader experiential system consisting of interrelated components. This study aimed to provide the Italian validation of the inventory by examining its psychometric features, its factor structure (Study 1, N = 545), and its convergent and discriminant validity (Study 2, N = 257). Study 1 supported the 2- and 4-factor solutions, and multi-group analyses confirmed the invariance measurement across age and gender for both models. Study 2 provided evidence for both the convergent validity by supporting the theoretical associations among Rational and Experiential Multimodal Inventory scores and similar and related measures, and the discriminant validity by showing associations between the two thinking styles and a different but conceptually related construct, i.e., identity formation. No associations between Rational and Experiential Multimodal Inventory scores and social desirability were found. The Italian version of the Rational and Experiential Multimodal Inventory showed satisfactory psychometric properties, thus confirming its validity. © The Author(s) 2016.

78 FR 33392 - Public Availability of Consumer Product Safety Commission FY 2012 Service Contract Inventory

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-04

... made through a contract or task order; (B) The organizational component of the executive agency administering the contract, and the organizational component of the agency whose requirements are being met through contractor performance of the service; (C) The total dollar amount obligated for services under...

77 FR 8818 - Public Availability of Consumer Product Safety Commission FY 2011 Service Contract Inventory

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-15

... through a contract or task order; (B) The organizational component of the executive agency administering the contract, and the organizational component of the agency whose requirements are being met through contractor performance of the service; (C) The total dollar amount obligated for services under the contract...

A Critical Analysis of Football Bowl Subdivision Coaching Contract Components

ERIC Educational Resources Information Center

Nichols, Justin Keith

2012-01-01

This exploratory study is designed to inventory and analyze contract components used by Football Bowl Subdivision (FBS) institutions in the National Collegiate Athletic Association (NCAA) to further contribute to the body research. The FBS is comprised of 120 institutions and 94 of those institutions submitted contracts to "USA Today"…

Strategies for assessing inter- and intra-specific variation in tree biomass in the interior west

Treesearch

David L.R. Affleck; John M. Goodburn; John D. Shaw

2012-01-01

Wildfire hazard mitigation and bioenergy harvesting have emerged as forest management priorities throughout the Interior West (IW) of the USA. Regional forest inventory and forecasting applications are therefore increasingly focused on tree biomass, including biomass in traditionally non-merchantable components. Yet accurate biomass equations for the latter components...

2010-2012 Minneapolis - St. Paul Travel Behavior Inventory |

Science.gov Websites

-St. Paul area conducted the survey. Methodology The TBI consists of a paper-based survey and a wearable global positioning system (GPS) survey. The data-collection process for these two surveys was independent, and the results are not intended to function together. Survey Records Survey records include

Using adjunct forest inventory methodology to quantify pinyon jay habitat in the great basin

Treesearch

Christopher Witt

2015-01-01

Pinyon jays (Gymnorhinus cyanocephalus) are the principal dispersal agent for pinyon pine seeds in the Great Basin region of the Intermountain West. However, Pinyon jays have exhibited significant population declines over much their range in recent decades, even as pinyon-juniper woodlands appear to have been expanding over the past 150 years. In...

Optimal tree increment models for the Northeastern United Statesq

Treesearch

Don C. Bragg

2003-01-01

used the potential relative increment (PRI) methodology to develop optimal tree diameter growth models for the Northeastern United States. Thirty species from the Eastwide Forest Inventory Database yielded 69,676 individuals, which were then reduced to fast-growing subsets for PRI analysis. For instance, only 14 individuals from the greater than 6,300-tree eastern...

Harvested wood products : basis for future methodological development

Treesearch

Kenneth E. Skog

2003-01-01

The IPCC Guidelines (IPCC 1997) provide an outline of how harvested wood could be treated in national greenhouse gas (GHG) inventories. This section shows the relation of that outline to the approaches and estimation methods to be presented in this Appendix. Wood and paper products are referred to as harvested wood products (HWP). It does not include carbon in...

Optimal Tree Increment Models for the Northeastern United States

Treesearch

Don C. Bragg

2005-01-01

I used the potential relative increment (PRI) methodology to develop optimal tree diameter growth models for the Northeastern United States. Thirty species from the Eastwide Forest Inventory Database yielded 69,676 individuals, which were then reduced to fast-growing subsets for PRI analysis. For instance, only 14 individuals from the greater than 6,300-tree eastern...

A Land Manager's Guide to Point Counts of Birds in the Southeast

Treesearch

Paul B. Hamel; Winston P. Smith; Daniel J. Twedt; James R. Woehr; Eddie Morris; Robert B. Hamilton; Robert J. Cooper

1996-01-01

Current widespread concern for the status of neotropical migratory birds has sparked interest in techniques for inventorying and monitoring populations of these and other birds in southeastern forest habitats. The present guide gives detailed instructions for conducting point counts of birds. It further presents a detailed methodology for the design and conduct of...

Forest Resources of East Oklahoma, 2008

Treesearch

Richard A. Harper; Tony G. Johnson

2012-01-01

The Forest Inventory and Analysis Program conducted the seventh survey of east Oklahoma forests. This was the establishment of the annual plot methodology and closeout of the prism remeasurement plots. Forest land area remained stable at 5.7 million acres and covered almost 57 percent of the land area. About 5.1 million acres of forest land was considered timberland...

Exploration of the Factorial Structure of the Revised Personal Functions of the Volunteerism Scale for Chinese Adolescents

ERIC Educational Resources Information Center

Law, Ben M F.; Shek, Daniel T. L.; Ma, Cecilia M. S.

2011-01-01

Participation in volunteer services can be regarded as an indicator of quality of life among adolescents. The Volunteer Functions Inventory (VFI) has long been used to assess the underlying motives of volunteers. Owing to conceptual, methodological and empirical limitations, the VFI could not be fully endorsed to understand Chinese adolescent…

"Peer Review: Nonroad (NR) Updates to Population Growth, Compression Ignition (CI) Criteria, Toxic Emission Factors and Speciation Profiles"

EPA Science Inventory

This report focuses on the methodology for estimating growth in NR engine populations as used in the MOVES201X-NONROAD emission inventory model. MOVES NR growth rates start with base year engine populations and estimate growth in the populations of NR engines, while applying cons...

Survival analysis for a large scale forest health issue: Missouri oak decline

Treesearch

C.W. Woodall; P.L. Grambsch; W. Thomas; W.K. Moser

2005-01-01

Survival analysis methodologies provide novel approaches for forest mortality analysis that may aid in detecting, monitoring, and mitigating of large-scale forest health issues. This study examined survivor analysis for evaluating a regional forest health issue - Missouri oak decline. With a statewide Missouri forest inventory, log-rank tests of the effects of...

Remote Sensing for Tropical Forest Assessment

Treesearch

AJR Gillespie

1994-01-01

The purpose of this workshop was to allow remote sensing experts from Latin America, the U.S.A., and FAO to discuss state-of-the-art methodology in remote sensing of forest environments, and to develop plans on how to better incorporate this technology into FAO and national forest inventory efforts. The workshop included numerous presentations of ongoing activities, as...

Using Module Analysis for Multiple Choice Responses: A New Method Applied to Force Concept Inventory Data

ERIC Educational Resources Information Center

Brewe, Eric; Bruun, Jesper; Bearden, Ian G.

2016-01-01

We describe "Module Analysis for Multiple Choice Responses" (MAMCR), a new methodology for carrying out network analysis on responses to multiple choice assessments. This method is used to identify modules of non-normative responses which can then be interpreted as an alternative to factor analysis. MAMCR allows us to identify conceptual…

Predicting bird habitat quality from a geospatial analysis of FIA data

Treesearch

John M. Tirpak; D. Todd Jones-Farrand; Frank R., III Thompson; Daniel J. Twedt; Mark D. Nelson; William B., III Uihlein

2009-01-01

The ability to assess the influence of site-scale forest structure on avian habitat suitability at an ecoregional scale remains a major methodological constraint to effective biological planning for forest land birds in North America. We evaluated the feasibility of using forest inventory and analysis (FIA) data to define vegetation structure within forest patches,...

Measuring Knowledge of Natural Selection: A Comparison of the CINS, an Open-Response Instrument, and an Oral Interview

ERIC Educational Resources Information Center

Nehm, Ross H.; Schonfeld, Irvin Sam

2008-01-01

Growing recognition of the central importance of fostering an in-depth understanding of natural selection has, surprisingly, failed to stimulate work on the development and rigorous evaluation of instruments that measure knowledge of it. We used three different methodological tools, the Conceptual Inventory of Natural Selection (CINS), a modified…

Validation of Virtual Learning Team Competencies for Individual Students in a Distance Education Setting

ERIC Educational Resources Information Center

Topchyan, Ruzanna; Zhang, Jie

2014-01-01

The purpose of this study was twofold. First, the study aimed to validate the scale of the Virtual Team Competency Inventory in distance education, which had initially been designed for a corporate setting. Second, the methodological advantages of Exploratory Structural Equation Modeling (ESEM) framework over Confirmatory Factor Analysis (CFA)…

The Use of the Internet in Collecting CDI Data -- An Example from Norway

ERIC Educational Resources Information Center

Kristoffersen, Kristian E.; Simonsen, Hanne Gram; Bleses, Dorthe; Wehberg, Sonja; Jorgensen, Rune Norgard; Eiesland, Eli Anne; Henriksen, Laila Yvonne

2013-01-01

This article presents the methodology used in a population-based study of early communicative development in Norwegian children using an adaptation of the MacArthur-Bates communicative development inventories (CDI), comprising approximately 6500 children aged between 0 ; 8 and 3 ; 0. To our knowledge, this is the first CDI study collecting data…

Retooling for the future.

PubMed

Andrews, D

1999-04-01

Several trends will accelerate changes in the industry initiated by Medicare's change in payment methodology, including explosive growth fueled by changing demographics, patient preferences, and technological advances; altered customer buying incentives created by managed care organization-provider partnerships; and accelerated consolidation. Home care agencies should "take inventory" of current practices and systems to determine capability gaps for competing in the new environment.

Advancing Grassroots Climate Change Awareness in Botswana: BCA Campus Greenhouse Gas Baseline Inventory

ERIC Educational Resources Information Center

Batisani, Nnyaladzi; Ndiane, Abijah

2014-01-01

Purpose: This paper aims to report on the results of a case study in Botswana, aimed at raising awareness on climate issues. Higher-education institutions play a leading role in sustainability efforts, as their research role often lays the groundwork for social transformation. Design/methodology/approach: The Clean Air-Cool Planet (CACP) campus…

Inventory on the dietary assessment tools available and needed in africa: a prerequisite for setting up a common methodological research infrastructure for nutritional surveillance, research, and prevention of diet-related non-communicable diseases.

PubMed

Pisa, Pedro T; Landais, Edwige; Margetts, Barrie; Vorster, Hester H; Friedenreich, Christine M; Huybrechts, Inge; Martin-Prevel, Yves; Branca, Francesco; Lee, Warren T K; Leclercq, Catherine; Jerling, Johann; Zotor, Francis; Amuna, Paul; Al Jawaldeh, Ayoub; Aderibigbe, Olaide Ruth; Amoussa, Waliou Hounkpatin; Anderson, Cheryl A M; Aounallah-Skhiri, Hajer; Atek, Madjid; Benhura, Chakare; Chifamba, Jephat; Covic, Namukolo; Dary, Omar; Delisle, Hélène; El Ati, Jalila; El Hamdouchi, Asmaa; El Rhazi, Karima; Faber, Mieke; Kalimbira, Alexander; Korkalo, Liisa; Kruger, Annamarie; Ledo, James; Machiweni, Tatenda; Mahachi, Carol; Mathe, Nonsikelelo; Mokori, Alex; Mouquet-Rivier, Claire; Mutie, Catherine; Nashandi, Hilde Liisa; Norris, Shane A; Onabanjo, Oluseye Olusegun; Rambeloson, Zo; Saha, Foudjo Brice U; Ubaoji, Kingsley Ikechukwu; Zaghloul, Sahar; Slimani, Nadia

2018-01-02

To carry out an inventory on the availability, challenges, and needs of dietary assessment (DA) methods in Africa as a pre-requisite to provide evidence, and set directions (strategies) for implementing common dietary methods and support web-research infrastructure across countries. The inventory was performed within the framework of the "Africa's Study on Physical Activity and Dietary Assessment Methods" (AS-PADAM) project. It involves international institutional and African networks. An inventory questionnaire was developed and disseminated through the networks. Eighteen countries responded to the dietary inventory questionnaire. Various DA tools were reported in Africa; 24-Hour Dietary Recall and Food Frequency Questionnaire were the most commonly used tools. Few tools were validated and tested for reliability. Face-to-face interview was the common method of administration. No computerized software or other new (web) technologies were reported. No tools were standardized across countries. The lack of comparable DA methods across represented countries is a major obstacle to implement comprehensive and joint nutrition-related programmes for surveillance, programme evaluation, research, and prevention. There is a need to develop new or adapt existing DA methods across countries by employing related research infrastructure that has been validated and standardized in other settings, with the view to standardizing methods for wider use.

Utilizing Radiofrequency Identification Technology to Improve Safety and Management of Blood Bank Supply Chains.

PubMed

Coustasse, Alberto; Meadows, Pamela; Hall, Robert S; Hibner, Travis; Deslich, Stacie

2015-11-01

The importance of efficiency in the supply chain of perishable products, such as the blood products used in transfusion services, cannot be overstated. Many problems can occur, such as the outdating of products, inventory management issues, patient misidentification, and mistransfusion. The purpose of this article was to identify the benefits and barriers associated with radiofrequency identification (RFID) usage in improving the blood bank supply chain. The methodology for this study was a qualitative literature review following a systematic approach. The review was limited to sources published from 2000 to 2014 in the English language. Sixty-five sources were found, and 56 were used in this research study. According to the finding of the present study, there are numerous benefits and barriers to RFID utilization in blood bank supply chains. RFID technology offers several benefits with regard to blood bank product management, including decreased transfusion errors, reduction of product loss, and more efficient inventory management. Barriers to RFID implementation include the cost associated with system implementation and patient privacy issues. Implementation of an RFID system can be a significant investment. However, when observing the positive impact that such systems may have on transfusion safety and inventory management, the cost associated with RFID systems can easily be justified. RFID in blood bank inventory management is vital to ensuring efficient product inventory management and positive patient outcomes.

Inventory of File gfs.t06z.pgrb2.1p00.f000

Science.gov Websites

analysis U-Component of Wind [m/s] 002 planetary boundary layer VGRD analysis V-Component of Wind [m/s] 003 planetary boundary layer VRATE analysis Ventilation Rate [m^2/s] 004 surface GUST analysis Wind Speed (Gust mb RH analysis Relative Humidity [%] 008 10 mb UGRD analysis U-Component of Wind [m/s] 009 10 mb VGRD

Inventory of File gfs.t06z.pgrb2.0p50.f000

Science.gov Websites

analysis U-Component of Wind [m/s] 002 planetary boundary layer VGRD analysis V-Component of Wind [m/s] 003 planetary boundary layer VRATE analysis Ventilation Rate [m^2/s] 004 surface GUST analysis Wind Speed (Gust mb RH analysis Relative Humidity [%] 008 10 mb UGRD analysis U-Component of Wind [m/s] 009 10 mb VGRD

Inventory of File gfs.t06z.pgrb2.0p25.f000

Science.gov Websites

analysis U-Component of Wind [m/s] 002 planetary boundary layer VGRD analysis V-Component of Wind [m/s] 003 planetary boundary layer VRATE analysis Ventilation Rate [m^2/s] 004 surface GUST analysis Wind Speed (Gust mb RH analysis Relative Humidity [%] 008 10 mb UGRD analysis U-Component of Wind [m/s] 009 10 mb VGRD

Inventory of File gfs.t06z.pgrb2.2p50.f000

Science.gov Websites

analysis U-Component of Wind [m/s] 002 planetary boundary layer VGRD analysis V-Component of Wind [m/s] 003 planetary boundary layer VRATE analysis Ventilation Rate [m^2/s] 004 surface GUST analysis Wind Speed (Gust mb RH analysis Relative Humidity [%] 008 10 mb UGRD analysis U-Component of Wind [m/s] 009 10 mb VGRD

OpenSimulator Interoperability with DRDC Simulation Tools: Compatibility Study

DTIC Science & Technology

2014-09-01

into two components: (1) backend data services consisting of user accounts, login service, assets, and inventory; and (2) the simulator server which...components are combined into a single OpenSimulator process. In grid mode, the two components are separated, placing the backend services into a ROBUST... mobile devices. Potential points of compatibility between Unity and OpenSimulator include: a Unity-based desktop computer OpenSimulator viewer; a

48 CFR 208.7302 - Policy.

Code of Federal Regulations, 2010 CFR

2010-10-01

... DEFENSE ACQUISITION PLANNING REQUIRED SOURCES OF SUPPLIES AND SERVICES Use of Government-Owned Precious.... DoD components shall furnish recovered precious metals contained in the DSCP inventory to production...

48 CFR 208.7302 - Policy.

Code of Federal Regulations, 2014 CFR

2014-10-01

... DEFENSE ACQUISITION PLANNING REQUIRED SOURCES OF SUPPLIES AND SERVICES Use of Government-Owned Precious.... DoD components shall furnish recovered precious metals contained in the DSCP inventory to production...

48 CFR 208.7302 - Policy.

Code of Federal Regulations, 2013 CFR

2013-10-01

... DEFENSE ACQUISITION PLANNING REQUIRED SOURCES OF SUPPLIES AND SERVICES Use of Government-Owned Precious.... DoD components shall furnish recovered precious metals contained in the DSCP inventory to production...

48 CFR 208.7302 - Policy.

Code of Federal Regulations, 2011 CFR

2011-10-01

... DEFENSE ACQUISITION PLANNING REQUIRED SOURCES OF SUPPLIES AND SERVICES Use of Government-Owned Precious.... DoD components shall furnish recovered precious metals contained in the DSCP inventory to production...

48 CFR 208.7302 - Policy.

Code of Federal Regulations, 2012 CFR

2012-10-01

... DEFENSE ACQUISITION PLANNING REQUIRED SOURCES OF SUPPLIES AND SERVICES Use of Government-Owned Precious.... DoD components shall furnish recovered precious metals contained in the DSCP inventory to production...

Inventory of File sref.t03z.pgrb212.spread_1hrly.grib2

Science.gov Websites

UGRD 1 hour fcst U-Component of Wind [m/s] std dev 002 10 m above ground VGRD 1 hour fcst V-Component of Wind [m/s] std dev 003 1000 mb UGRD 1 hour fcst U-Component of Wind [m/s] std dev 004 850 mb UGRD 1 hour fcst U-Component of Wind [m/s] std dev 005 700 mb UGRD 1 hour fcst U-Component of Wind [m/s

Inventory of File sref.t03z.pgrb212.mean_1hrly.grib2

Science.gov Websites

hour fcst U-Component of Wind [m/s] wt ens-mean 002 10 m above ground VGRD 1 hour fcst V-Component of Wind [m/s] wt ens-mean 003 1000 mb UGRD 1 hour fcst U-Component of Wind [m/s] wt ens-mean 004 850 mb UGRD 1 hour fcst U-Component of Wind [m/s] wt ens-mean 005 700 mb UGRD 1 hour fcst U-Component of Wind

[Psychometric properties of the Polish version of the Oldenburg Burnout Inventory (OLBI)].

PubMed

Baka, Łukasz; Basińska, Beata A

2016-01-01

The objective of this study was to test the psychometric properties of the Polish version of the Oldenburg Burnout Inventory (OLBI) - its factor structure, reliability, validity and standard norms. The study was conducted on 3 independent samples of 1804, 366 and 48 workers employed in social service and general service professions. To test the OLBI structure the exploratory factor analysis was conducted. The reliability was assessed by means of Cronbach's α coefficient (the internal consistent) and test-retest (the stability over time) method, with a 6-week follow-up. The construct validity of the OLBI was tested by means of correlation analysis, using perceived stress and work engagement as the criterion variables. The result of the factor analysis confirmed a 2-factor structure of the Inventory but the construction of each factor differed from that in the OLBI original version. Therefore, 2 separate factor analyses - each for the single component of job burnout (exhaustion and disengagement from work) - were conducted. The analyses revealed that each of the components consisted of 2 subscales. The reliability of the OLBI was supported by 2 methods. It was also proved that job burnout and its 2 components, exhaustion and disengagement from work, were positively correlated with perceived stress and negatively correlated with work engagement and its 3 components - vigor, absorption and dedication. Despite certain limitations the Polish version of the OLBI shows satisfactory psychometric properties and it can be used to measure job burnout in Polish conditions. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Inventory of File gfs.t06z.pgrb2b.0p25.f000

Science.gov Websites

UGRD analysis U-Component of Wind [m/s] 005 1 mb VGRD analysis V-Component of Wind [m/s] 006 1 mb ABSV Temperature [K] 011 2 mb RH analysis Relative Humidity [%] 012 2 mb UGRD analysis U-Component of Wind [m/s ] 013 2 mb VGRD analysis V-Component of Wind [m/s] 014 2 mb ABSV analysis Absolute Vorticity [1/s] 015 2

Inventory of File gfs.t06z.pgrb2b.1p00.f000

Science.gov Websites

UGRD analysis U-Component of Wind [m/s] 005 1 mb VGRD analysis V-Component of Wind [m/s] 006 1 mb ABSV Temperature [K] 011 2 mb RH analysis Relative Humidity [%] 012 2 mb UGRD analysis U-Component of Wind [m/s ] 013 2 mb VGRD analysis V-Component of Wind [m/s] 014 2 mb ABSV analysis Absolute Vorticity [1/s] 015 2

Inventory of File gfs.t06z.pgrb2b.0p50.f000

Science.gov Websites

UGRD analysis U-Component of Wind [m/s] 005 1 mb VGRD analysis V-Component of Wind [m/s] 006 1 mb ABSV Temperature [K] 011 2 mb RH analysis Relative Humidity [%] 012 2 mb UGRD analysis U-Component of Wind [m/s ] 013 2 mb VGRD analysis V-Component of Wind [m/s] 014 2 mb ABSV analysis Absolute Vorticity [1/s] 015 2

Optimizing Multi-Product Multi-Constraint Inventory Control Systems with Stochastic Replenishments

NASA Astrophysics Data System (ADS)

Allah Taleizadeh, Ata; Aryanezhad, Mir-Bahador; Niaki, Seyed Taghi Akhavan

Multi-periodic inventory control problems are mainly studied employing two assumptions. The first is the continuous review, where depending on the inventory level orders can happen at any time and the other is the periodic review, where orders can only happen at the beginning of each period. In this study, we relax these assumptions and assume that the periodic replenishments are stochastic in nature. Furthermore, we assume that the periods between two replenishments are independent and identically random variables. For the problem at hand, the decision variables are of integer-type and there are two kinds of space and service level constraints for each product. We develop a model of the problem in which a combination of back-order and lost-sales are considered for the shortages. Then, we show that the model is of an integer-nonlinear-programming type and in order to solve it, a search algorithm can be utilized. We employ a simulated annealing approach and provide a numerical example to demonstrate the applicability of the proposed methodology.

Development of parametric material, energy, and emission inventories for wafer fabrication in the semiconductor industry.

PubMed

Murphy, Cynthia F; Kenig, George A; Allen, David T; Laurent, Jean-Philippe; Dyer, David E

2003-12-01

Currently available data suggest that most of the energy and material consumption related to the production of an integrated circuit is due to the wafer fabrication process. The complexity of wafer manufacturing, requiring hundreds of steps that vary from product to product and from facility to facility and which change every few years, has discouraged the development of material, energy, and emission inventory modules for the purpose of insertion into life cycle assessments. To address this difficulty, a flexible, process-based system for estimating material requirements, energy requirements, and emissions in wafer fabrication has been developed. The method accounts for mass and energy use atthe unit operation level. Parametric unit operation modules have been developed that can be used to predict changes in inventory as the result of changes in product design, equipment selection, or process flow. A case study of the application of the modules is given for energy consumption, but a similar methodology can be used for materials, individually or aggregated.

Trait Variance and Response Style Variance in the Scales of the Personality Inventory for DSM-5 (PID-5).

PubMed

Ashton, Michael C; de Vries, Reinout E; Lee, Kibeom

2017-01-01

Using self- and observer reports on the Personality Inventory for DSM-5 (PID-5) and the HEXACO Personality Inventory-Revised (HEXACO-PI-R), we identified for each inventory several trait dimensions (each defined by both self- and observer reports on the facet-level scales belonging to the same domain) and 2 source dimensions (each defined by self-reports or by observer reports, respectively, on all facet-level scales). Results (N = 217) showed that the source dimensions of the PID-5 were very large (much larger than those of the HEXACO-PI-R), and suggest that self-report (or observer report) response styles substantially inflate the intercorrelations and the alpha reliabilities of the PID-5 scales. We discuss the meaning and the implications of the large PID-5 source components, and we suggest some methods of controlling their influence.

Applications of Landsat data and the data base approach

USGS Publications Warehouse

Lauer, D.T.

1986-01-01

A generalized methodology for applying digital Landsat data to resource inventory and assessment tasks is currently being used by several bureaux and agencies within the US Department of the Interior. The methodology includes definition of project objectives and output, identification of source materials, construction of the digital data base, performance of computer-assisted analyses, and generation of output. The USGS, Bureau of Land Management, US Fish and Wildlife Service, Bureau of Indian Affairs, Bureau of Reclamation, and National Park Service have used this generalized methodology to assemble comprehensive digital data bases for resource management. Advanced information processing techniques have been applied to these data bases for making regional environmental surveys on millions of acres of public lands at costs ranging from $0.01 to $0.08 an acre.-Author

Event-related brain potentials and the study of reward processing: Methodological considerations.

PubMed

Krigolson, Olave E

2017-11-14

There is growing interest in using electroencephalography and specifically the event-related brain potential (ERP) methodology to study human reward processing. Since the discovery of the feedback related negativity (Miltner et al., 1997) and the development of theories associating the feedback related negativity and more recently the reward positivity with reinforcement learning, midbrain dopamine function, and the anterior cingulate cortex (i.e., Holroyd and Coles, 2002) researchers have used the ERP methodology to probe the neural basis of reward learning in humans. However, examination of the feedback related negativity and the reward positivity cannot be done without an understanding of some key methodological issues that must be taken into account when using ERPs and examining these ERP components. For example, even the component name - the feedback related negativity - is a source of debate within the research community as some now strongly feel that the component should be named the reward positivity (Proudfit, 2015). Here, ten key methodological issues are discussed - confusion in component naming, the reward positivity, component identification, peak quantification and the use of difference waveforms, frequency (the N200) and component contamination (the P300), the impact of feedback timing, action, and task learnability, and how learning results in changes in the amplitude of the feedback-related negativity/reward positivity. The hope here is to not provide a definitive approach for examining the feedback related negativity/reward positivity, but instead to outline the key issues that must be taken into account when examining this component to assist researchers in their study of human reward processing with the ERP methodology. Copyright © 2017 Elsevier B.V. All rights reserved.

Methodological reporting in qualitative, quantitative, and mixed methods health services research articles.

PubMed

Wisdom, Jennifer P; Cavaleri, Mary A; Onwuegbuzie, Anthony J; Green, Carla A

2012-04-01

Methodologically sound mixed methods research can improve our understanding of health services by providing a more comprehensive picture of health services than either method can alone. This study describes the frequency of mixed methods in published health services research and compares the presence of methodological components indicative of rigorous approaches across mixed methods, qualitative, and quantitative articles. All empirical articles (n = 1,651) published between 2003 and 2007 from four top-ranked health services journals. All mixed methods articles (n = 47) and random samples of qualitative and quantitative articles were evaluated to identify reporting of key components indicating rigor for each method, based on accepted standards for evaluating the quality of research reports (e.g., use of p-values in quantitative reports, description of context in qualitative reports, and integration in mixed method reports). We used chi-square tests to evaluate differences between article types for each component. Mixed methods articles comprised 2.85 percent (n = 47) of empirical articles, quantitative articles 90.98 percent (n = 1,502), and qualitative articles 6.18 percent (n = 102). There was a statistically significant difference (χ(2) (1) = 12.20, p = .0005, Cramer's V = 0.09, odds ratio = 1.49 [95% confidence interval = 1,27, 1.74]) in the proportion of quantitative methodological components present in mixed methods compared to quantitative papers (21.94 versus 47.07 percent, respectively) but no statistically significant difference (χ(2) (1) = 0.02, p = .89, Cramer's V = 0.01) in the proportion of qualitative methodological components in mixed methods compared to qualitative papers (21.34 versus 25.47 percent, respectively). Few published health services research articles use mixed methods. The frequency of key methodological components is variable. Suggestions are provided to increase the transparency of mixed methods studies and the presence of key methodological components in published reports. © Health Research and Educational Trust.

Methodological Reporting in Qualitative, Quantitative, and Mixed Methods Health Services Research Articles

PubMed Central

Wisdom, Jennifer P; Cavaleri, Mary A; Onwuegbuzie, Anthony J; Green, Carla A

2012-01-01

Objectives Methodologically sound mixed methods research can improve our understanding of health services by providing a more comprehensive picture of health services than either method can alone. This study describes the frequency of mixed methods in published health services research and compares the presence of methodological components indicative of rigorous approaches across mixed methods, qualitative, and quantitative articles. Data Sources All empirical articles (n = 1,651) published between 2003 and 2007 from four top-ranked health services journals. Study Design All mixed methods articles (n = 47) and random samples of qualitative and quantitative articles were evaluated to identify reporting of key components indicating rigor for each method, based on accepted standards for evaluating the quality of research reports (e.g., use of p-values in quantitative reports, description of context in qualitative reports, and integration in mixed method reports). We used chi-square tests to evaluate differences between article types for each component. Principal Findings Mixed methods articles comprised 2.85 percent (n = 47) of empirical articles, quantitative articles 90.98 percent (n = 1,502), and qualitative articles 6.18 percent (n = 102). There was a statistically significant difference (χ2(1) = 12.20, p = .0005, Cramer's V = 0.09, odds ratio = 1.49 [95% confidence interval = 1,27, 1.74]) in the proportion of quantitative methodological components present in mixed methods compared to quantitative papers (21.94 versus 47.07 percent, respectively) but no statistically significant difference (χ2(1) = 0.02, p = .89, Cramer's V = 0.01) in the proportion of qualitative methodological components in mixed methods compared to qualitative papers (21.34 versus 25.47 percent, respectively). Conclusion Few published health services research articles use mixed methods. The frequency of key methodological components is variable. Suggestions are provided to increase the transparency of mixed methods studies and the presence of key methodological components in published reports. PMID:22092040

Redox proteomics for the assessment of redox-related posttranslational regulation in plants.

PubMed

Mock, Hans-Peter; Dietz, Karl-Josef

2016-08-01

The methodological developments of in vivo and in vitro protein labeling and subsequent detection enable sensitive and specific detection of redox modifications. Such methods are presently applied to diverse cells and tissues, subproteomes and developmental as well as environmental conditions. The chloroplast proteome is particularly suitable for such kind of studies, because redox regulation of chloroplast proteins is well established, many plastid proteins are abundant, redox network components have been inventoried in great depth, and functional consequences explored. Thus the repertoire of redox-related posttranslational modifications on the one hand side and their abundance on the other pose a challenge for the near future to understand their contribution to physiological regulation. The various posttranslational redox modifications are introduced, followed by a description of the available proteomics methods. The significance of the redox-related posttranslational modification is exemplarily worked out using established examples from photosynthesis. This article is part of a Special Issue entitled: Plant Proteomics--a bridge between fundamental processes and crop production, edited by Dr. Hans-Peter Mock. Copyright © 2016. Published by Elsevier B.V.

Inventory of File gfs.t06z.pgrb2b.1p00.f006

Science.gov Websites

mb UGRD 6 hour fcst U-Component of Wind [m/s] 005 1 mb VGRD 6 hour fcst V-Component of Wind [m/s] 006 hour fcst U-Component of Wind [m/s] 013 2 mb VGRD 6 hour fcst V-Component of Wind [m/s] 014 2 mb ABSV 6 fcst U-Component of Wind [m/s] 021 3 mb VGRD 6 hour fcst V-Component of Wind [m/s] 022 3 mb ABSV 6 hour

Inventory of File gfs.t06z.pgrb2b.0p25.f006

Science.gov Websites

mb UGRD 6 hour fcst U-Component of Wind [m/s] 005 1 mb VGRD 6 hour fcst V-Component of Wind [m/s] 006 hour fcst U-Component of Wind [m/s] 013 2 mb VGRD 6 hour fcst V-Component of Wind [m/s] 014 2 mb ABSV 6 fcst U-Component of Wind [m/s] 021 3 mb VGRD 6 hour fcst V-Component of Wind [m/s] 022 3 mb ABSV 6 hour

Inventory of File gfs.t06z.pgrb2b.0p50.f006

Science.gov Websites

mb UGRD 6 hour fcst U-Component of Wind [m/s] 005 1 mb VGRD 6 hour fcst V-Component of Wind [m/s] 006 hour fcst U-Component of Wind [m/s] 013 2 mb VGRD 6 hour fcst V-Component of Wind [m/s] 014 2 mb ABSV 6 fcst U-Component of Wind [m/s] 021 3 mb VGRD 6 hour fcst V-Component of Wind [m/s] 022 3 mb ABSV 6 hour

HTGR plant availability and reliability evaluations. Volume I. Summary of evaluations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cadwallader, G.J.; Hannaman, G.W.; Jacobsen, F.K.

1976-12-01

The report (1) describes a reliability assessment methodology for systematically locating and correcting areas which may contribute to unavailability of new and uniquely designed components and systems, (2) illustrates the methodology by applying it to such components in a high-temperature gas-cooled reactor (Public Service Company of Colorado's Fort St. Vrain 330-MW(e) HTGR), and (3) compares the results of the assessment with actual experience. The methodology can be applied to any component or system; however, it is particularly valuable for assessments of components or systems which provide essential functions, or the failure or mishandling of which could result in relatively largemore » economic losses.« less

Assessing Satellite-Based Fire Data for use in the National Emissions Inventory

NASA Technical Reports Server (NTRS)

Soja, Amber J.; Al-Saadi, Jassim; Giglio, Louis; Randall, Dave; Kittaka, Chieko; Pouliot, George; Kordzi, Joseph J.; Raffuse, Sean; Pace, Thompson G.; Pierce, Thomas E.;

Inventory of File sref_nmb.t03z.pgrb212.p1.f00.grib2

Science.gov Websites

Relative Humidity [%] 014.1 10 m above ground UGRD analysis U-Component of Wind [m/s] 014.2 10 m above ground VGRD analysis V-Component of Wind [m/s] 015 surface WEASD analysis Water Equivalent of Accumulated Relative Humidity [%] 033.1 30-0 mb above ground UGRD analysis U-Component of Wind [m/s] 033.2 30-0 mb

Inventory of File sref_nmm.t03z.pgrb212.p1.f00.grib2

Science.gov Websites

Relative Humidity [%] 014.1 10 m above ground UGRD analysis U-Component of Wind [m/s] 014.2 10 m above ground VGRD analysis V-Component of Wind [m/s] 015 surface WEASD analysis Water Equivalent of Accumulated Relative Humidity [%] 033.1 30-0 mb above ground UGRD analysis U-Component of Wind [m/s] 033.2 30-0 mb

Permafrost Favourability Index: Spatial modelling in the French Alps using a Rock Glacier Inventory

NASA Astrophysics Data System (ADS)

Marcer, Marco; Bodin, Xavier; Brenning, Alexander; Schoeneich, Philippe; Charvet, Raphaële; Gottardi, Frédéric

2017-12-01

In the present study we used the first rock glacier inventory for the entire French Alps to model spatial permafrost distribution in the region. The inventory, which does not originally belong to this study, was revised by the authors in order to obtain a database suitable for statistical modelling. Climatic and topographic data evaluated at the rock glacier locations were used as predictor variables in a Generalized Linear Model. Model performances are strong, suggesting that, in agreement with several previous studies, this methodology is able to model accurately rock glacier distribution. A methodology to estimate model uncertainties is proposed, revealing that the subjectivity in the interpretation of rock glacier activity and contours may substantially bias the model. The model highlights a North-South trend in the regional pattern of permafrost distribution which is attributed to the climatic influences of the Atlantic and Mediterranean climates. Further analysis suggest that lower amounts of precipitation in the early winter and a thinner snow cover, as typically found in the Mediterranean area, could contribute to the existence of permafrost at higher temperatures compared to the Northern Alps. A comparison with the Alpine Permafrost Index Map (APIM) shows no major differences with our model, highlighting the very good predictive power of the APIM despite its tendency to slightly overestimate permafrost extension with respect to our database. The use of rock glaciers as indicators of permafrost existence despite their time response to climate change is discussed and an interpretation key is proposed in order to ensure the proper use of the model for research as well as for operational purposes.

C-Based Design Methodology and Topological Change for an Indian Agricultural Tractor Component

NASA Astrophysics Data System (ADS)

Matta, Anil Kumar; Raju, D. Ranga; Suman, K. N. S.; Kranthi, A. S.

2018-06-01

The failure of tractor components and their replacement has now become very common in India because of re-cycling, re-sale, and duplication. To over come the problem of failure we propose a design methodology for topological change co-simulating with software's. In the proposed Design methodology, the designer checks Paxial, Pcr, Pfailue, τ by hand calculations, from which refined topological changes of R.S.Arm are formed. We explained several techniques employed in the component for reduction, removal of rib material to change center of gravity and centroid point by using system C for mixed level simulation and faster topological changes. The design process in system C can be compiled and executed with software, TURBO C7. The modified component is developed in proE and analyzed in ANSYS. The topologically changed component with slot 120 × 4.75 × 32.5 mm at the center showed greater effectiveness than the original component.

C-Based Design Methodology and Topological Change for an Indian Agricultural Tractor Component

NASA Astrophysics Data System (ADS)

Matta, Anil Kumar; Raju, D. Ranga; Suman, K. N. S.; Kranthi, A. S.

2018-02-01

The failure of tractor components and their replacement has now become very common in India because of re-cycling, re-sale, and duplication. To over come the problem of failure we propose a design methodology for topological change co-simulating with software's. In the proposed Design methodology, the designer checks Paxial, Pcr, Pfailue, τ by hand calculations, from which refined topological changes of R.S.Arm are formed. We explained several techniques employed in the component for reduction, removal of rib material to change center of gravity and centroid point by using system C for mixed level simulation and faster topological changes. The design process in system C can be compiled and executed with software, TURBO C7. The modified component is developed in proE and analyzed in ANSYS. The topologically changed component with slot 120 × 4.75 × 32.5 mm at the center showed greater effectiveness than the original component.

Advancing individual tree biomass prediction: assessment and alternatives to the component ratio method

Treesearch

Aaron Weiskittel; Jereme Frank; David Walker; Phil Radtke; David Macfarlane; James Westfall

2015-01-01

Prediction of forest biomass and carbon is becoming important issues in the United States. However, estimating forest biomass and carbon is difficult and relies on empirically-derived regression equations. Based on recent findings from a national gap analysis and comprehensive assessment of the USDA Forest Service Forest Inventory and Analysis (USFS-FIA) component...

Psychometric Evaluation of a Triage Decision Making Inventory

DTIC Science & Technology

2011-06-27

the correlation matrix and inter-item correlations were reviewed. The Bartlett’s test of sphericity and the Kaiser - Meyer Olkin (KMO) were examined to...nursing experience. Principal component factor analysis with Varimax rotation was conducted using SPSS version 16. The Kaiser - Meyer - Olkin Measure of...Component Analysis. Rotation Method: Varimax with Kaiser Normalization. a. Rotation converged in 7 iterations

Cabruca agroforests of southern Bahia Brazil: tree component, management, species conservation and sustainability

USDA-ARS?s Scientific Manuscript database

In southern Bahia, cabruca is the agroforestry system in which cocoa is cultivated under the shade of sparse native forest trees. Aiming to characterize the tree component of this system and its management practices, we conducted an inventory of the non-cocoa trees in 16 ha of cabruca and do intervi...

Stress, burnout, and strategies for reducing them: what's the situation among Canadian family physicians?

PubMed

Lee, F Joseph; Stewart, Moira; Brown, Judith Belle

2008-02-01

To ascertain Canadian family physicians' levels of stress and burnout and the strategies they use to reduce these problems. Census survey. Kitchener-Waterloo, an urban area with a population of approximately 300 000 in southwestern Ontario. Family physicians. Scores on the Family Physician Stress Inventory, scores on strategies to reduce personal stress, scores on strategies to reduce stress on the job, and scores on the Maslach Burnout Inventory. Participation rate was 77.8% (123 of 158 surveys returned). About 42.5% of participants had high stress levels. Burnout was defined by 3 components: emotional exhaustion, depersonalization (going through the day like an "automaton"), and perceived lack of personal accomplishment. Many respondents scored high on the burnout inventory, and almost half had high levels of emotional exhaustion and depersonalization (47.9% and 46.3%, respectively). No demographic factors were associated with high scores on these components. Use of strategies to reduce personal and occupational stress was associated with lower levels of burnout. Scores on the Family Physician Stress Inventory correlated highly with scores on the Maslach Burnout Inventory. Regardless of demographic factors, family physicians are at risk of having high levels of stress and burnout. Classic burnout is related to stress brought on by factors such as too much paperwork, long waits for specialists and tests, feeling undervalued, feeling unsupported, and having to abide by rules and regulations. Common strategies for reducing personal stress included eating nutritiously and spending time with family and friends. Common strategies for reducing stress on the job included valuing relationships with patients and participating in continuing medical education. Stress and burnout are related to the desire to give up practice and are, therefore, a human resources issue for the entire health care system.

Negative emotions affect postoperative scores for evaluating functional knee recovery and quality of life after total knee replacement.

PubMed

Qi, A; Lin, C; Zhou, A; Du, J; Jia, X; Sun, L; Zhang, G; Zhang, L; Liu, M

2016-01-01

This study aimed to determine whether psychological factors affect health-related quality of life (HRQL) and recovery of knee function in total knee replacement (TKR) patients. A total of 119 TKR patients (male: 38; female: 81) completed the Beck Anxiety Inventory (BAI), Beck Depression Inventory (BDI), State Trait Anxiety Inventory (STAI), Eysenck Personality Questionnaire-revised (EPQR-S), Knee Society Score (KSS), and HRQL (SF-36). At 1 and 6 months after surgery, anxiety, depression, and KSS scores in TKR patients were significantly better compared with those preoperatively (P<0.05). SF-36 scores at the sixth month after surgery were significantly improved compared with preoperative scores (P<0.001). Preoperative Physical Component Summary Scale (PCS) and Mental Component Summary Scale (MCS) scores were negatively associated with extraversion (E score) (B=-0.986 and -0.967, respectively, both P<0.05). Postoperative PCS and State Anxiety Inventory (SAI) scores were negatively associated with neuroticism (N score; B=-0.137 and -0.991, respectively, both P<0.05). Postoperative MCS, SAI, Trait Anxiety Inventory (TAI), and BAI scores were also negatively associated with the N score (B=-0.367, -0.107, -0.281, and -0.851, respectively, all P<0.05). The KSS function score at the sixth month after surgery was negatively associated with TAI and N scores (B=-0.315 and -0.532, respectively, both P<0.05), but positively associated with the E score (B=0.215, P<0.05). The postoperative KSS joint score was positively associated with postoperative PCS (B=0.356, P<0.05). In conclusion, for TKR patients, the scores used for evaluating recovery of knee function and HRQL after 6 months are inversely associated with the presence of negative emotions.

Natural resources inventory system ASVT project

NASA Technical Reports Server (NTRS)

Joyce, A. T. (Principal Investigator)

1978-01-01

The author has identified the following significant results. One of the main advantages, both cost-wise and time-wise, of the natural resource inventory system involved the use of LANDSAT-acquired digital data for the land cover information component; thereby, eliminating the need to digitize such dynamic information from a map or aerial photo base. It was thought that the utility and the cost of information as derived from LANDSAT data for the various applications justified the operational use of data generated by LANDSAT.

Development of the Sri Lankan early teenagers' violence inventory: an instrument to measure peer violence in schools.

PubMed

Wijeratne, Monika; Seneviratne, Rohini; Gunawardena, Nalika; Østbye, Truls; Lynch, Catherine; Sandøy, Ingvild Fossgard

2014-01-01

This study was designed to develop an inventory to measure peer violence among early teens (13-15 years of age) in schools in Sri Lanka. Development of SLETVI was carried out in two phases. In phase I, development of an operational definition for peer violence, identification, and finalizing violent acts for inventory was done by a combination of qualitative methods: a comprehensive literature review, focus group discussions among 13-15-year-old adolescents, their teachers and parents, and consultative meetings with experts in the field. Inventory was then pretested. In phase II, elaboration of SLETVI was carried out by administering it to a sample of 1700 adolescents (13-15 years old). Exploratory factor analysis using principal component analysis was performed separately for experiences of victimization and perpetration. Test-retest reliability of SLETVI was assessed. SLETVI included 37 items in three factors: "less severe violence," "severe physical," and "severe relational" violence. Combined use of qualitative and quantitative methods enabled development of a culturally valid and reliable operational inventory to assess early teenagers' peer violence in Sri Lankan and other South Asian schools.

Sidney Blatt's Object Relations Inventory: Contributions and Future Directions.

PubMed

Huprich, Steven K; Auerbach, John S; Porcerelli, John H; Bupp, Lindsey L

2016-01-01

In this article, we provide a historical overview of the Object Relations Inventory (ORI) and related methods for the assessment of object relations constructed by Sidney Blatt and colleagues (e.g., Blatt, Bers, & Schaffer, 1992 ; Blatt, Wein, Chevron, & Quinlan, 1979 ; Diamond, Kaslow, Coonerty, & Blatt, 1990 ). We clarify terminology that has been used inconsistently in the literature, especially by way of differentiating the methods used to collect descriptions of significant figures, such as the ORI and its predecessor, the Parental Description (PD) task, and the rating scales that Blatt and colleagues constructed to rate those descriptions. We provide a tabular summary of empirical studies of the measure and offer a critical review of those aspects of the instrument that require further empirical investigation and methodological rigor.

Defining Responsibility in Maintaining Financial Accounting Systems.

DTIC Science & Technology

1995-01-01

acquisition and issuance of materials, original cost , location, etc., KAR 2 (Property and Inventory Accounting )." (3:10) The final methodology used in...PROFESSIONAL MILITARY COMPTROLLER SCHOOL IDEA PAPER TITLE DEFINING RESPONSIBILITY IN MAINTAINING FINANCIAL ACCOUNTING SYSTEMS AUTHOR . :.a EFANIE B...or the Department of the Air Force. DIC tiJ.[ In.,,- B . . . .. . PMCS IDEA PAPER TITLE: Defining Responsibility in Maintaining Financial Accounting

Cultura, Comunicacion e interaccion: Hacia el contexto total del lenguage y el hombre hispanicos (Culture, Communication and Interaction: Towards a Total Context of the Spanish Language and Speaker)

ERIC Educational Resources Information Center

Poyatos, Fernando

1974-01-01

Described the methodological problems in setting up a kinesic inventory. Concludes that it is highly unrealistic to study language by itself without analyzing the formal and semantic make-up of the triple basic structure of language-paralanguage-kinesics. (Text is in Spanish.) (DS)

Inventory and Assessment of Aquatic Plant Management Methodologies.

DTIC Science & Technology

1983-01-01

waterhyacinth (Eichhornia crassipes (Mart.) Solms.),* and fra- grant waterlily ( Nymphaea odorata Ait.). Other important herbicides used for treatment of problem...Lemna minor L.) SAMl Fragrant waterlily ( Nymphaea LMN odorata Ait.) Endothall Brazilian elodea SAC, NAO Eurasian watermilfoil NPS (Myriophyllum...Cattail Tgpha spp. Fragrant waterlily Nymphaea odorata Ait. Frog’s bit Lininobium spongia (Bosc.) Steud. Pickerelweed Pantederia spp. -.1 Slender

Methodology in the assessment of stress among air traffic control specialists (ATCS) : normative adult data for the State-Trait Anxiety Inventory from non-ATCS populations.

DOT National Transportation Integrated Search

1981-03-01

STAI scores of adult men and women within the age range of 25 through 59 years were generally equal to or slightly less than scores of the college undergraduate normative group. This suggests that the previous use of undergraduate norms to evaluate A...

A Critical Survey of Aircraft Maintenance Officer Training and Career Development.

DTIC Science & Technology

1982-09-01

RESEARCH DESIGN AND METHODOLOGY ............ ... 52 Introduction ...... ................. ... 52 Data Collection Plan .... ............. ... 52 v CHAPTER...1,981 of whom held an AMO AFSC. The occupational data collected was used to develop job tasks inventories, demographic pro- files, organizational...Specifically, it addresses the data collection plans we used, the statistical tests we designed and applied, and the assumptions and limitations we

Using Landsat Thematic Mapper and SPOT Satellite Imagery to inventory wetland plants of the Coeur d'Alene Floodplain

Treesearch

F. M. Roberts; P. E. Gessler

2000-01-01

Landsat Thematic Mapper (TM) and SPOT Satellite Imagery were used to map wetland plant species in thc Coeur d'Alene floodplain in northern Idaho. This paper discusses the methodology used to create a wetland plant species map for the floodplain. Species mapped included common cattail (Typha latifolia); water horse-tail (Equisetum...

Small-scale monitoring - can it be integrated with large-scale programs?

Treesearch

C. M. Downes; J. Bart; B. T. Collins; B. Craig; B. Dale; E. H. Dunn; C. M. Francis; S. Woodley; P. Zorn

2005-01-01

There are dozens of programs and methodologies for monitoring and inventory of bird populations, differing in geographic scope, species focus, field methods and purpose. However, most of the emphasis has been placed on large-scale monitoring programs. People interested in assessing bird numbers and long-term trends in small geographic areas such as a local birding area...

The Incorporation of Market Orientation in the School Culture: An Essential Aspect of School Marketing

ERIC Educational Resources Information Center

Oplatka, Izhar; Hemsley-Brown, Jane

2007-01-01

Purpose: The purpose of this paper is to present the major features of market orientation (MO) and its benefits for schools, suggests an inventory to measure the degree of MO in a school, and provides strategies to incorporate elements of MO into the school culture. Design/methodology/approach: An instructional, technical approach which is based…

Response of Scots pine stand vitality to changes in environmental factors in Poland, 1991-1995

Treesearch

Jerzy Wawrzoniak

1998-01-01

Vitality inventories of Scots pine stands, the most common species in Poland, have been done since 1991 by using the ICP-Forest methodology. In Scots pine stands older than 40 years, 1,040 observation plots were established. Defoliation was used as the primary indicator of stand vitality. During 1991 to 1995, SO2 and NOx...

A Decision Tool to Evaluate Budgeting Methodologies for Estimating Facility Recapitalization Requirements

DTIC Science & Technology

2008-03-01

1 . Maintenance Practices Influence Service Life .......................................................... 11 2 . Expectations or Standards May...BRB, 1991, p. 1 - 2 ) Additionally, public sector organizations typically have a larger inventory of facilities to maintain, making asset management...questions were answered. 1 . What are the long term causes and effects of under-funding the maintenance of facilities? 2 . What methods currently

DNA in a bottle-Rapid metabarcoding survey for early alerts of invasive species in ports.

PubMed

Borrell, Yaisel J; Miralles, Laura; Do Huu, Hoang; Mohammed-Geba, Khaled; Garcia-Vazquez, Eva

2017-01-01

Biota monitoring in ports is increasingly needed for biosecurity reasons and safeguarding marine biodiversity from biological invasion. Present and future international biosecurity directives can be accomplished only if the biota acquired by maritime traffic in ports is controlled. Methodologies for biota inventory are diverse and now rely principally on extensive and labor-intensive sampling along with taxonomic identification by experts. In this study, we employed an extremely simplified environmental DNA (eDNA) sampling methodology from only three 1-L bottles of water per port, followed by metabarcoding (high-throughput sequencing and DNA-based species identification) using 18S rDNA and Cytochrome oxidase I as genetic barcodes. Eight Bay of Biscay ports with available inventory of fouling invertebrates were employed as a case study. Despite minimal sampling efforts, three invasive invertebrates were detected: the barnacle Austrominius modestus, the tubeworm Ficopomatus enigmaticus and the polychaete Polydora triglanda. The same species have been previously found from visual and DNA barcoding (genetic identification of individuals) surveys in the same ports. The current costs of visual surveys, conventional DNA barcoding and this simplified metabarcoding protocol were compared. The results encourage the use of metabarcoding for early biosecurity alerts.

Greenhouse gas emissions from municipal solid waste management in Indian mega-cities: a case study of Chennai landfill sites.

PubMed

Jha, Arvind K; Sharma, C; Singh, Nahar; Ramesh, R; Purvaja, R; Gupta, Prabhat K

2008-03-01

Municipal solid waste generation rate is over-riding the population growth rate in all mega-cities in India. Greenhouse gas emission inventory from landfills of Chennai has been generated by measuring the site specific emission factors in conjunction with relevant activity data as well as using the IPCC methodologies for CH4 inventory preparation. In Chennai, emission flux ranged from 1.0 to 23.5mg CH4m(-2)h(-1), 6 to 460microg N2Om(-2)h(-1) and 39 to 906mg CO2m(2)h(-1) at Kodungaiyur and 0.9 to 433mg CH4m(-2)h(-1), 2.7 to 1200microg N2Om(-2)h(-1) and 12.3 to 964.4mg CO2m(-2)h(-1) at Perungudi. CH4 emission estimates were found to be about 0.12Gg in Chennai from municipal solid waste management for the year 2000 which is lower than the value computed using IPCC, 1996 [IPCC, 1996. Report of the 12th session of the intergovernmental panel of climate change, Mexico City, 1996] methodologies.

Psychometric Properties of Questionnaires on Functional Health Status in Oropharyngeal Dysphagia: A Systematic Literature Review

PubMed Central

Speyer, Renée; Cordier, Reinie; Kertscher, Berit; Heijnen, Bas J

2014-01-01

Introduction. Questionnaires on Functional Health Status (FHS) are part of the assessment of oropharyngeal dysphagia. Objective. To conduct a systematic review of the literature on the psychometric properties of English-language FHS questionnaires in adults with oropharyngeal dysphagia. Methods. A systematic search was performed using the electronic databases Pubmed and Embase. The psychometric properties of the questionnaires were determined based on the COSMIN taxonomy of measurement properties and definitions for health-related patient-reported outcomes and the COSMIN checklist using preset psychometric criteria. Results. Three questionnaires were included: the Eating Assessment Tool (EAT-10), the Swallowing Outcome after Laryngectomy (SOAL), and the Self-report Symptom Inventory. The Sydney Swallow Questionnaire (SSQ) proved to be identical to the Modified Self-report Symptom Inventory. All FHS questionnaires obtained poor overall methodological quality scores for most measurement properties. Conclusions. The retrieved FHS questionnaires need psychometric reevaluation; if the overall methodological quality shows satisfactory improvement on most measurement properties, the use of the questionnaires in daily clinic and research can be justified. However, in case of insufficient validity and/or reliability scores, new FHS questionnaires need to be developed using and reporting on preestablished psychometric criteria as recommended in literature. PMID:24877095

DNA in a bottle—Rapid metabarcoding survey for early alerts of invasive species in ports

PubMed Central

Miralles, Laura; Do Huu, Hoang; Mohammed-Geba, Khaled; Garcia-Vazquez, Eva

2017-01-01

Biota monitoring in ports is increasingly needed for biosecurity reasons and safeguarding marine biodiversity from biological invasion. Present and future international biosecurity directives can be accomplished only if the biota acquired by maritime traffic in ports is controlled. Methodologies for biota inventory are diverse and now rely principally on extensive and labor-intensive sampling along with taxonomic identification by experts. In this study, we employed an extremely simplified environmental DNA (eDNA) sampling methodology from only three 1-L bottles of water per port, followed by metabarcoding (high-throughput sequencing and DNA-based species identification) using 18S rDNA and Cytochrome oxidase I as genetic barcodes. Eight Bay of Biscay ports with available inventory of fouling invertebrates were employed as a case study. Despite minimal sampling efforts, three invasive invertebrates were detected: the barnacle Austrominius modestus, the tubeworm Ficopomatus enigmaticus and the polychaete Polydora triglanda. The same species have been previously found from visual and DNA barcoding (genetic identification of individuals) surveys in the same ports. The current costs of visual surveys, conventional DNA barcoding and this simplified metabarcoding protocol were compared. The results encourage the use of metabarcoding for early biosecurity alerts. PMID:28873426

A spatial ammonia emission inventory for pig farming

NASA Astrophysics Data System (ADS)

Rebolledo, Boris; Gil, Antonia; Pallarés, Javier

2013-01-01

Atmospheric emissions of ammonia (NH3) from the agricultural sector have become a significant environmental and public concern as they have impacts on human health and ecosystems. This work proposes an improved methodology in order to identify administrative regions with high NH3 emissions from pig farming and calculates an ammonia density map (kg NH3-N ha-1), based on the number of pigs and available agricultural land, terrain slopes, groundwater bodies, soil permeability, zones sensitive to nitrate pollution and surface water buffer zones. The methodology has been used to construct a general tool for locating ammonia emissions from pig farming when detailed information of livestock farms is not available.

Optimization of location routing inventory problem with transshipment

NASA Astrophysics Data System (ADS)

Ghani, Nor Edayu Abd; Shariff, S. Sarifah Radiah; Zahari, Siti Meriam

2015-05-01

Location Routing Inventory Problem (LRIP) is a collaboration of the three components in the supply chain. It is confined by location-allocation, vehicle routing and inventory management. The aim of the study is to minimize the total system cost in the supply chain. Transshipment is introduced in order to allow the products to be shipped to a customer who experiences a shortage, either directly from the supplier or from another customer. In the study, LRIP is introduced with the transshipment (LRIPT) and customers act as the transshipment points. We select the transshipment point by using the p-center and we present the results in two divisions of cases. Based on the analysis, the results indicated that LRIPT performed well compared to LRIP.

ALTERNATIVES TO DUPLICATE DIET METHODOLOGY

EPA Science Inventory

Duplicate Diet (DD) methodology has been used to collect information about the dietary exposure component in the context of total exposure studies. DD methods have been used to characterize the dietary exposure component in the NHEXAS pilot studies. NERL desired to evaluate it...

Application of China's National Forest Continuous Inventory database.

PubMed

Xie, Xiaokui; Wang, Qingli; Dai, Limin; Su, Dongkai; Wang, Xinchuang; Qi, Guang; Ye, Yujing

2011-12-01

The maintenance of a timely, reliable and accurate spatial database on current forest ecosystem conditions and changes is essential to characterize and assess forest resources and support sustainable forest management. Information for such a database can be obtained only through a continuous forest inventory. The National Forest Continuous Inventory (NFCI) is the first level of China's three-tiered inventory system. The NFCI is administered by the State Forestry Administration; data are acquired by five inventory institutions around the country. Several important components of the database include land type, forest classification and ageclass/ age-group. The NFCI database in China is constructed based on 5-year inventory periods, resulting in some of the data not being timely when reports are issued. To address this problem, a forest growth simulation model has been developed to update the database for years between the periodic inventories. In order to aid in forest plan design and management, a three-dimensional virtual reality system of forest landscapes for selected units in the database (compartment or sub-compartment) has also been developed based on Virtual Reality Modeling Language. In addition, a transparent internet publishing system for a spatial database based on open source WebGIS (UMN Map Server) has been designed and utilized to enhance public understanding and encourage free participation of interested parties in the development, implementation, and planning of sustainable forest management.

A component modes projection and assembly model reduction methodology for articulated, multi-flexible body structures

NASA Technical Reports Server (NTRS)

Lee, Allan Y.; Tsuha, Walter S.

1993-01-01

A two-stage model reduction methodology, combining the classical Component Mode Synthesis (CMS) method and the newly developed Enhanced Projection and Assembly (EP&A) method, is proposed in this research. The first stage of this methodology, called the COmponent Modes Projection and Assembly model REduction (COMPARE) method, involves the generation of CMS mode sets, such as the MacNeal-Rubin mode sets. These mode sets are then used to reduce the order of each component model in the Rayleigh-Ritz sense. The resultant component models are then combined to generate reduced-order system models at various system configurations. A composite mode set which retains important system modes at all system configurations is then selected from these reduced-order system models. In the second stage, the EP&A model reduction method is employed to reduce further the order of the system model generated in the first stage. The effectiveness of the COMPARE methodology has been successfully demonstrated on a high-order, finite-element model of the cruise-configured Galileo spacecraft.

Probabilistic structural analysis methods for space propulsion system components

NASA Technical Reports Server (NTRS)

Chamis, C. C.

1986-01-01

The development of a three-dimensional inelastic analysis methodology for the Space Shuttle main engine (SSME) structural components is described. The methodology is composed of: (1) composite load spectra, (2) probabilistic structural analysis methods, (3) the probabilistic finite element theory, and (4) probabilistic structural analysis. The methodology has led to significant technical progress in several important aspects of probabilistic structural analysis. The program and accomplishments to date are summarized.

A methodology to annotate systems biology markup language models with the synthetic biology open language.

PubMed

Roehner, Nicholas; Myers, Chris J

2014-02-21

Recently, we have begun to witness the potential of synthetic biology, noted here in the form of bacteria and yeast that have been genetically engineered to produce biofuels, manufacture drug precursors, and even invade tumor cells. The success of these projects, however, has often failed in translation and application to new projects, a problem exacerbated by a lack of engineering standards that combine descriptions of the structure and function of DNA. To address this need, this paper describes a methodology to connect the systems biology markup language (SBML) to the synthetic biology open language (SBOL), existing standards that describe biochemical models and DNA components, respectively. Our methodology involves first annotating SBML model elements such as species and reactions with SBOL DNA components. A graph is then constructed from the model, with vertices corresponding to elements within the model and edges corresponding to the cause-and-effect relationships between these elements. Lastly, the graph is traversed to assemble the annotating DNA components into a composite DNA component, which is used to annotate the model itself and can be referenced by other composite models and DNA components. In this way, our methodology can be used to build up a hierarchical library of models annotated with DNA components. Such a library is a useful input to any future genetic technology mapping algorithm that would automate the process of composing DNA components to satisfy a behavioral specification. Our methodology for SBML-to-SBOL annotation is implemented in the latest version of our genetic design automation (GDA) software tool, iBioSim.

Inventory of File gfs.t06z.pgrb2.1p00.f006

Science.gov Websites

fcst U-Component of Wind [m/s] 002 planetary boundary layer VGRD 6 hour fcst V-Component of Wind [m/s Wind Speed (Gust) [m/s] 005 10 mb HGT 6 hour fcst Geopotential Height [gpm] 006 10 mb TMP 6 hour fcst Temperature [K] 007 10 mb RH 6 hour fcst Relative Humidity [%] 008 10 mb UGRD 6 hour fcst U-Component of Wind

Inventory of File gfs.t06z.pgrb2.0p25.f006

Science.gov Websites

fcst U-Component of Wind [m/s] 002 planetary boundary layer VGRD 6 hour fcst V-Component of Wind [m/s Wind Speed (Gust) [m/s] 005 10 mb HGT 6 hour fcst Geopotential Height [gpm] 006 10 mb TMP 6 hour fcst Temperature [K] 007 10 mb RH 6 hour fcst Relative Humidity [%] 008 10 mb UGRD 6 hour fcst U-Component of Wind

Inventory of File sref_em.t03z.pgrb212.p1.f00.grib2

Science.gov Websites

Relative Humidity [%] 014.1 10 m above ground UGRD analysis U-Component of Wind [m/s] 014.2 10 m above ground VGRD analysis V-Component of Wind [m/s] 015 surface WEASD analysis Water Equivalent of Accumulated Wind [m/s] 032.2 30-0 mb above ground VGRD analysis V-Component of Wind [m/s] 033 30-0 mb above ground

Inventory of File sref_em.t09z.pgrb212.ctl.grib2

Science.gov Websites

Temperature [K] 002 10 m above ground UGRD 3 hour fcst U-Component of Wind [m/s] 003 10 m above ground VGRD 3 hour fcst V-Component of Wind [m/s] 004 mean sea level PRMSL 3 hour fcst Pressure Reduced to MSL [Pa mb HGT 3 hour fcst Geopotential Height [gpm] 012 250 mb UGRD 3 hour fcst U-Component of Wind [m/s

Inventory of File sref_em.t03z.pgrb221.p1.f00.grib2

Science.gov Websites

Relative Humidity [%] 014.1 10 m above ground UGRD analysis U-Component of Wind [m/s] 014.2 10 m above ground VGRD analysis V-Component of Wind [m/s] 015 surface WEASD analysis Water Equivalent of Accumulated Wind [m/s] 032.2 30-0 mb above ground VGRD analysis V-Component of Wind [m/s] 033 30-0 mb above ground

Inventory of File gfs.t06z.pgrb2.0p50.f006

Science.gov Websites

fcst U-Component of Wind [m/s] 002 planetary boundary layer VGRD 6 hour fcst V-Component of Wind [m/s Wind Speed (Gust) [m/s] 005 10 mb HGT 6 hour fcst Geopotential Height [gpm] 006 10 mb TMP 6 hour fcst Temperature [K] 007 10 mb RH 6 hour fcst Relative Humidity [%] 008 10 mb UGRD 6 hour fcst U-Component of Wind

Inventory of File gfs.t06z.pgrb2.2p50.f006

Science.gov Websites

fcst U-Component of Wind [m/s] 002 planetary boundary layer VGRD 6 hour fcst V-Component of Wind [m/s Wind Speed (Gust) [m/s] 005 10 mb HGT 6 hour fcst Geopotential Height [gpm] 006 10 mb TMP 6 hour fcst Temperature [K] 007 10 mb RH 6 hour fcst Relative Humidity [%] 008 10 mb UGRD 6 hour fcst U-Component of Wind

Inventory of File nam.t00z.awp21100.tm00.grib2

Science.gov Websites

analysis Pressure Reduced to MSL [Pa] 002 surface GUST analysis Wind Speed (Gust) [m/s] 003 100 mb HGT -Component of Wind [m/s] 007.2 100 mb VGRD analysis V-Component of Wind [m/s] 008 150 mb HGT analysis Wind [m/s] 012.2 150 mb VGRD analysis V-Component of Wind [m/s] 013 200 mb HGT analysis Geopotential

Evaluating BC and NOx emission inventories for the Paris region from MEGAPOLI aircraft measurements

NASA Astrophysics Data System (ADS)

Petetin, H.; Beekmann, M.; Colomb, A.; Denier van der Gon, H. A. C.; Dupont, J.-C.; Honoré, C.; Michoud, V.; Morille, Y.; Perrussel, O.; Schwarzenboeck, A.; Sciare, J.; Wiedensohler, A.; Zhang, Q. J.

2015-09-01

High uncertainties affect black carbon (BC) emissions, and, despite its important impact on air pollution and climate, very few BC emissions evaluations are found in the literature. This paper presents a novel approach, based on airborne measurements across the Paris, France, plume, developed in order to evaluate BC and NOx emissions at the scale of a whole agglomeration. The methodology consists in integrating, for each transect, across the plume observed and simulated concentrations above background. This allows for several error sources (e.g., representativeness, chemistry, plume lateral dispersion) to be minimized in the model used. The procedure is applied with the CHIMERE chemistry-transport model to three inventories - the EMEP inventory and the so-called TNO and TNO-MP inventories - over the month of July 2009. Various systematic uncertainty sources both in the model (e.g., boundary layer height, vertical mixing, deposition) and in observations (e.g., BC nature) are discussed and quantified, notably through sensitivity tests. Large uncertainty values are determined in our results, which limits the usefulness of the method to rather strongly erroneous emission inventories. A statistically significant (but moderate) overestimation is obtained for the TNO BC emissions and the EMEP and TNO-MP NOx emissions, as well as for the BC / NOx emission ratio in TNO-MP. The benefit of the airborne approach is discussed through a comparison with the BC / NOx ratio at a ground site in Paris, which additionally suggests a spatially heterogeneous error in BC emissions over the agglomeration.

Military, Charter, Unreported Domestic Traffic and General Aviation 1976, 1984, 1992, and 2015 Emission Scenarios

NASA Technical Reports Server (NTRS)

Mortlock, Alan; VanAlstyne, Richard

1998-01-01

The report describes development of databases estimating aircraft engine exhaust emissions for the years 1976 and 1984 from global operations of Military, Charter, historic Soviet and Chinese, Unreported Domestic traffic, and General Aviation (GA). These databases were developed under the National Aeronautics and Space Administration's (NASA) Advanced Subsonic Assessment (AST). McDonnell Douglas Corporation's (MDC), now part of the Boeing Company has previously estimated engine exhaust emissions' databases for the baseline year of 1992 and a 2015 forecast year scenario. Since their original creation, (Ward, 1994 and Metwally, 1995) revised technology algorithms have been developed. Additionally, GA databases have been created and all past NIDC emission inventories have been updated to reflect the new technology algorithms. Revised data (Baughcum, 1996 and Baughcum, 1997) for the scheduled inventories have been used in this report to provide a comparison of the total aviation emission forecasts from various components. Global results of two historic years (1976 and 1984), a baseline year (1992) and a forecast year (2015) are presented. Since engine emissions are directly related to fuel usage, an overview of individual aviation annual global fuel use for each inventory component is also given in this report.

Compatible estimators of the components of change for a rotating panel forest inventory design

Treesearch

Francis A. Roesch

2007-01-01

This article presents two approaches for estimating the components of forest change utilizing data from a rotating panel sample design. One approach uses a variant of the exponentially weighted moving average estimator and the other approach uses mixed estimation. Three general transition models were each combined with a single compatibility model for the mixed...

Defense Demilitarization Manual

DTIC Science & Technology

1991-10-01

dichloroethyl) sulfide ( Mustard Gas , HD or H). 16. Component. See subparagraph 32. (3) Ethyldichloroarsine. (ED). 17. Controlled Item Inventory Code (CIIC). A... Gas Cylinder Components, Grinding/ W elding for Drill Purposes ............................... A7-65 75 Rifle, Cal. .30, MI, Receiver Rail, Welding...U.S. Munitions List. (except tear gas formulations containing 1 percent or less CN or CS), sternutators and irritant smoke, CATEGORY XIX - DEFENSE

Attributes of standing dead trees in forests of the United States

Treesearch

Christopher W. Woodall; James E. Smith; Patrick D. Miles

2009-01-01

Standing dead trees in forests of the United States serve as wildlife habitat, a fuel loading component, and carbon stocks. Although standing dead trees are a vital component of forest ecosystems, information regarding this resource across the Nation is lacking. The first annual inventory of standing dead trees across the United States was initiated in 1999, resulting...

SARA Reading Components Tests, RISE Forms: Technical Adequacy and Test Design, 2nd Edition. Research Report. ETS RR-15-32

ERIC Educational Resources Information Center

Sabatini, John; Bruce, Kelly; Steinberg, Jonathan; Weeks, Jonathan

2015-01-01

This technical report describes the conceptual foundation and measurement properties of the Reading Inventory and Scholastic Evaluation (RISE). The RISE is a 6-subtest, Web-administered reading skills components battery. The theoretical and empirical foundations of each subtest in the battery are reviewed, as well as item designs. The results…

Methodology to identify risk-significant components for inservice inspection and testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, M.T.; Hartley, R.S.; Jones, J.L. Jr.

1992-08-01

Periodic inspection and testing of vital system components should be performed to ensure the safe and reliable operation of Department of Energy (DOE) nuclear processing facilities. Probabilistic techniques may be used to help identify and rank components by their relative risk. A risk-based ranking would allow varied DOE sites to implement inspection and testing programs in an effective and cost-efficient manner. This report describes a methodology that can be used to rank components, while addressing multiple risk issues.

An Empirical Comparison of Maslow's and Murray's Needs Systems

ERIC Educational Resources Information Center

Cunningham, Claude H.; And Others

1975-01-01

Attempts to establish the corresponding dimensions of needs measured by the Work Motivation Inventory and the Edwards Personal Preference Schedule. Three significant relationships were found between the two components. (Author/DEP)

A Methodology for the Hybridization Based in Active Components: The Case of cGA and Scatter Search.

PubMed

Villagra, Andrea; Alba, Enrique; Leguizamón, Guillermo

2016-01-01

This work presents the results of a new methodology for hybridizing metaheuristics. By first locating the active components (parts) of one algorithm and then inserting them into second one, we can build efficient and accurate optimization, search, and learning algorithms. This gives a concrete way of constructing new techniques that contrasts the spread ad hoc way of hybridizing. In this paper, the enhanced algorithm is a Cellular Genetic Algorithm (cGA) which has been successfully used in the past to find solutions to such hard optimization problems. In order to extend and corroborate the use of active components as an emerging hybridization methodology, we propose here the use of active components taken from Scatter Search (SS) to improve cGA. The results obtained over a varied set of benchmarks are highly satisfactory in efficacy and efficiency when compared with a standard cGA. Moreover, the proposed hybrid approach (i.e., cGA+SS) has shown encouraging results with regard to earlier applications of our methodology.

Global Gridded Emission Inventories of Pentabrominated Diphenyl Ether (PeBDE)

NASA Astrophysics Data System (ADS)

Li, Yi-Fan; Tian, Chongguo; Yang, Meng; Jia, Hongliang; Ma, Jianmin; Li, Dacheng

2010-05-01

Polybrominated diphenyl ethers (PBDEs) are flame retardants widely used in many everyday products such as cars, furniture, textiles, and other electronic equipment. The commercial PBDEs have three major technical mixtures: penta-(PeBDE), octa-(OBDE) and decabromodiphenyl ethers (DeBDE). PeBDE is a mixture of several BDE congeners, such as BDE-47, -99, and -100, and has been included as a new member of persistent organic pollutants (POPs) under the 2009 Stockholm Convention. In order to produce gridded emission inventories of PeBDE on a global scale, information of production, consumption, emission, and physiochemical properties of PeBDE have been searched for published papers, government reports, and internet publications. A methodology to estimate the emissions of PeBDE has been developed and global gridded emission inventories of 2 major congener in PeBDE mixture, BDE-47 and -99, on a 1 degree by 1degree latitude/longitude resolution for 2005 have been compiled. Using these emission inventories as input data, the Canadian Model for Environmental Transport of Organochlorine Pesticides (CanMETOP) model was used to simulate the transport of these chemicals and their concentrations in air were calculated for the year of 2005. The modeled air concentration of BDE-47 and -99 were compared with the monitoring air concentrations of these two congeners in the same year obtained from renowned international/national monitoring programs, such as Global Atmospheric Passive Sampling (GAPS), the Integrated Atmospheric Deposition Network (IADN), and the Chinese POPs Soil and Air Monitoring Program (SAMP), and significant correlations between the modeled results and the monitoring data were found, indicating the high quality of the produced emission inventories of BDE-47 and -99. Keywords: Pentabrominated Diphenyl Ether (PeBDE), Emission Inventories, Global, Model

Multidimensional Approach for Tsunami Vulnerability Assessment: Framing the Territorial Impacts in Two Municipalities in Portugal.

PubMed

Tavares, Alexandre Oliveira; Barros, José Leandro; Santos, Angela

2017-04-01

This study presents a new multidimensional methodology for tsunami vulnerability assessment that combines the morphological, structural, social, and tax component of vulnerability. This new approach can be distinguished from previous methodologies that focused primarily on the evaluation of potentially affected buildings and did not use tsunami numerical modeling. The methodology was applied to the Figueira da Foz and Vila do Bispo municipalities in Portugal. For each area, the potential tsunami-inundated areas were calculated considering the 1755 Lisbon tsunami, which is the greatest disaster caused by natural hazards that ever occurred in Portugal. Furthermore, the four components of the vulnerability were calculated to obtain a composite vulnerability index. This methodology enables us to differentiate the two areas in their vulnerability, highlighting the characteristics of the territory components. This methodology can be a starting point for the creation of a local assessment framework at the municipal scale related to tsunami risk. In addition, the methodology is an important support for the different local stakeholders. © 2016 Society for Risk Analysis.

A decomposition model and voxel selection framework for fMRI analysis to predict neural response of visual stimuli.

PubMed

Raut, Savita V; Yadav, Dinkar M

2018-03-28

This paper presents an fMRI signal analysis methodology using geometric mean curve decomposition (GMCD) and mutual information-based voxel selection framework. Previously, the fMRI signal analysis has been conducted using empirical mean curve decomposition (EMCD) model and voxel selection on raw fMRI signal. The erstwhile methodology loses frequency component, while the latter methodology suffers from signal redundancy. Both challenges are addressed by our methodology in which the frequency component is considered by decomposing the raw fMRI signal using geometric mean rather than arithmetic mean and the voxels are selected from EMCD signal using GMCD components, rather than raw fMRI signal. The proposed methodologies are adopted for predicting the neural response. Experimentations are conducted in the openly available fMRI data of six subjects, and comparisons are made with existing decomposition models and voxel selection frameworks. Subsequently, the effect of degree of selected voxels and the selection constraints are analyzed. The comparative results and the analysis demonstrate the superiority and the reliability of the proposed methodology.

Forest Cover Estimation in Ireland Using Radar Remote Sensing: A Comparative Analysis of Forest Cover Assessment Methodologies.

PubMed

Devaney, John; Barrett, Brian; Barrett, Frank; Redmond, John; O Halloran, John

2015-01-01

Quantification of spatial and temporal changes in forest cover is an essential component of forest monitoring programs. Due to its cloud free capability, Synthetic Aperture Radar (SAR) is an ideal source of information on forest dynamics in countries with near-constant cloud-cover. However, few studies have investigated the use of SAR for forest cover estimation in landscapes with highly sparse and fragmented forest cover. In this study, the potential use of L-band SAR for forest cover estimation in two regions (Longford and Sligo) in Ireland is investigated and compared to forest cover estimates derived from three national (Forestry2010, Prime2, National Forest Inventory), one pan-European (Forest Map 2006) and one global forest cover (Global Forest Change) product. Two machine-learning approaches (Random Forests and Extremely Randomised Trees) are evaluated. Both Random Forests and Extremely Randomised Trees classification accuracies were high (98.1-98.5%), with differences between the two classifiers being minimal (<0.5%). Increasing levels of post classification filtering led to a decrease in estimated forest area and an increase in overall accuracy of SAR-derived forest cover maps. All forest cover products were evaluated using an independent validation dataset. For the Longford region, the highest overall accuracy was recorded with the Forestry2010 dataset (97.42%) whereas in Sligo, highest overall accuracy was obtained for the Prime2 dataset (97.43%), although accuracies of SAR-derived forest maps were comparable. Our findings indicate that spaceborne radar could aid inventories in regions with low levels of forest cover in fragmented landscapes. The reduced accuracies observed for the global and pan-continental forest cover maps in comparison to national and SAR-derived forest maps indicate that caution should be exercised when applying these datasets for national reporting.

Forest Cover Estimation in Ireland Using Radar Remote Sensing: A Comparative Analysis of Forest Cover Assessment Methodologies

PubMed Central

Devaney, John; Barrett, Brian; Barrett, Frank; Redmond, John; O`Halloran, John

2015-01-01

Quantification of spatial and temporal changes in forest cover is an essential component of forest monitoring programs. Due to its cloud free capability, Synthetic Aperture Radar (SAR) is an ideal source of information on forest dynamics in countries with near-constant cloud-cover. However, few studies have investigated the use of SAR for forest cover estimation in landscapes with highly sparse and fragmented forest cover. In this study, the potential use of L-band SAR for forest cover estimation in two regions (Longford and Sligo) in Ireland is investigated and compared to forest cover estimates derived from three national (Forestry2010, Prime2, National Forest Inventory), one pan-European (Forest Map 2006) and one global forest cover (Global Forest Change) product. Two machine-learning approaches (Random Forests and Extremely Randomised Trees) are evaluated. Both Random Forests and Extremely Randomised Trees classification accuracies were high (98.1–98.5%), with differences between the two classifiers being minimal (<0.5%). Increasing levels of post classification filtering led to a decrease in estimated forest area and an increase in overall accuracy of SAR-derived forest cover maps. All forest cover products were evaluated using an independent validation dataset. For the Longford region, the highest overall accuracy was recorded with the Forestry2010 dataset (97.42%) whereas in Sligo, highest overall accuracy was obtained for the Prime2 dataset (97.43%), although accuracies of SAR-derived forest maps were comparable. Our findings indicate that spaceborne radar could aid inventories in regions with low levels of forest cover in fragmented landscapes. The reduced accuracies observed for the global and pan-continental forest cover maps in comparison to national and SAR-derived forest maps indicate that caution should be exercised when applying these datasets for national reporting. PMID:26262681

A Hybrid Coarse-graining Approach for Lipid Bilayers at Large Length and Time Scales

PubMed Central

Ayton, Gary S.; Voth, Gregory A.

2009-01-01

A hybrid analytic-systematic (HAS) coarse-grained (CG) lipid model is developed and employed in a large-scale simulation of a liposome. The methodology is termed hybrid analyticsystematic as one component of the interaction between CG sites is variationally determined from the multiscale coarse-graining (MS-CG) methodology, while the remaining component utilizes an analytic potential. The systematic component models the in-plane center of mass interaction of the lipids as determined from an atomistic-level MD simulation of a bilayer. The analytic component is based on the well known Gay-Berne ellipsoid of revolution liquid crystal model, and is designed to model the highly anisotropic interactions at a highly coarse-grained level. The HAS CG approach is the first step in an “aggressive” CG methodology designed to model multi-component biological membranes at very large length and timescales. PMID:19281167

CINERGI: Community Inventory of EarthCube Resources for Geoscience Interoperability

NASA Astrophysics Data System (ADS)

Zaslavsky, Ilya; Bermudez, Luis; Grethe, Jeffrey; Gupta, Amarnath; Hsu, Leslie; Lehnert, Kerstin; Malik, Tanu; Richard, Stephen; Valentine, David; Whitenack, Thomas

2014-05-01

Organizing geoscience data resources to support cross-disciplinary data discovery, interpretation, analysis and integration is challenging because of different information models, semantic frameworks, metadata profiles, catalogs, and services used in different geoscience domains, not to mention different research paradigms and methodologies. The central goal of CINERGI, a new project supported by the US National Science Foundation through its EarthCube Building Blocks program, is to create a methodology and assemble a large inventory of high-quality information resources capable of supporting data discovery needs of researchers in a wide range of geoscience domains. The key characteristics of the inventory are: 1) collaboration with and integration of metadata resources from a number of large data facilities; 2) reliance on international metadata and catalog service standards; 3) assessment of resource "interoperability-readiness"; 4) ability to cross-link and navigate data resources, projects, models, researcher directories, publications, usage information, etc.; 5) efficient inclusion of "long-tail" data, which are not appearing in existing domain repositories; 6) data registration at feature level where appropriate, in addition to common dataset-level registration, and 7) integration with parallel EarthCube efforts, in particular focused on EarthCube governance, information brokering, service-oriented architecture design and management of semantic information. We discuss challenges associated with accomplishing CINERGI goals, including defining the inventory scope; managing different granularity levels of resource registration; interaction with search systems of domain repositories; explicating domain semantics; metadata brokering, harvesting and pruning; managing provenance of the harvested metadata; and cross-linking resources based on the linked open data (LOD) approaches. At the higher level of the inventory, we register domain-wide resources such as domain catalogs, vocabularies, information models, data service specifications, identifier systems, and assess their conformance with international standards (such as those adopted by ISO and OGC, and used by INSPIRE) or de facto community standards using, in part, automatic validation techniques. The main level in CINERGI leverages a metadata aggregation platform (currently Geoportal Server) to organize harvested resources from multiple collections and contributed by community members during EarthCube end-user domain workshops or suggested online. The latter mechanism uses the SciCrunch toolkit originally developed within the Neuroscience Information Framework (NIF) project and now being extended to other communities. The inventory is designed to support requests such as "Find resources with theme X in geographic area S", "Find datasets with subject Y using query concept expansion", "Find geographic regions having data of type Z", "Find datasets that contain property P". With the added LOD support, additional types of requests, such as "Find example implementations of specification X", "Find researchers who have worked in Domain X, dataset Y, location L", "Find resources annotated by person X", will be supported. Project's website (http://workspace.earthcube.org/cinergi) provides access to the initial resource inventory, a gallery of EarthCube researchers, collections of geoscience models, metadata entry forms, and other software modules and inventories being integrated into the CINERGI system. Support from the US National Science Foundation under award NSF ICER-1343816 is gratefully acknowledged.

FORCARB2: An updated version of the U.S. Forest Carbon Budget Model

Treesearch

Linda S. Heath; Michael C. Nichols; James E. Smith; John R. Mills

2010-01-01

FORCARB2, an updated version of the U.S. FORest CARBon Budget Model (FORCARB), produces estimates of carbon stocks and stock changes for forest ecosystems and forest products at 5-year intervals. FORCARB2 includes a new methodology for carbon in harvested wood products, updated initial inventory data, a revised algorithm for dead wood, and now includes public forest...

An automatic method for retrieving and indexing catalogues of biomedical courses.

PubMed

Maojo, Victor; de la Calle, Guillermo; García-Remesal, Miguel; Bankauskaite, Vaida; Crespo, Jose

2008-11-06

Although there is wide information about Biomedical Informatics education and courses in different Websites, information is usually not exhaustive and difficult to update. We propose a new methodology based on information retrieval techniques for extracting, indexing and retrieving automatically information about educational offers. A web application has been developed to make available such information in an inventory of courses and educational offers.

An economic order quantity model with shortage and inflation

NASA Astrophysics Data System (ADS)

Wulan, Elis Ratna; Nurjaman, Wildan

2015-09-01

The effect of inflation has become a persistent characteristic and more significant problem of many developing economies especially in the third world countries. While making effort to achieve optimal quantity of product to be produced or purchased using the simplest and on the shelf classical EOQ model, the non-inclusion of conflicting economic realities as shortage and inflation has rendered its result quite uneconomical and hence the purpose for this study. Mathematical expression was developed for each of the cost components the sum of which become the total inventory model over the period (0,L) ((TIC(0,L)). L is planning horizon and TIC(0,L) is total inventory cost over a period of (0,L). Significant savings with increase in quantity was achieved based on deference in the varying price regime. With the assumptions considered and subject to the availability of reliable inventory cost element, the developed model is found to produce a feasible, and economic inventory stock-level with the numerical example of a material supply of a manufacturing company.

Integrated Data Base Program: a status report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Notz, K.J.; Klein, J.A.

1984-06-01

The Integrated Data Base (IDB) Program provides official Department of Energy (DOE) data on spent fuel and radioactive waste inventories, projections, and characteristics. The accomplishments of FY 1983 are summarized for three broad areas: (1) upgrading and issuing of the annual report on spent fuel and radioactive waste inventories, projections, and characteristics, including ORIGEN2 applications and a quality assurance plan; (2) creation of a summary data file in user-friendly format for use on a personal computer and enhancing user access to program data; and (3) optimizing and documentation of the data handling methodology used by the IDB Program and providingmore » direct support to other DOE programs and sites in data handling. Plans for future work in these three areas are outlined. 23 references, 11 figures.« less

A semi-automatic traffic sign detection, classification, and positioning system

NASA Astrophysics Data System (ADS)

Creusen, I. M.; Hazelhoff, L.; de With, P. H. N.

2012-01-01

The availability of large-scale databases containing street-level panoramic images offers the possibility to perform semi-automatic surveying of real-world objects such as traffic signs. These inventories can be performed significantly more efficiently than using conventional methods. Governmental agencies are interested in these inventories for maintenance and safety reasons. This paper introduces a complete semi-automatic traffic sign inventory system. The system consists of several components. First, a detection algorithm locates the 2D position of the traffic signs in the panoramic images. Second, a classification algorithm is used to identify the traffic sign. Third, the 3D position of the traffic sign is calculated using the GPS position of the photographs. Finally, the results are listed in a table for quick inspection and are also visualized in a web browser.

Frequency-area distribution of earthquake-induced landslides

NASA Astrophysics Data System (ADS)

Tanyas, H.; Allstadt, K.; Westen, C. J. V.

2016-12-01

Discovering the physical explanations behind the power-law distribution of landslides can provide valuable information to quantify triggered landslide events and as a consequence to understand the relation between landslide causes and impacts in terms of environmental settings of landslide affected area. In previous studies, the probability of landslide size was utilized for this quantification and the developed parameter was called a landslide magnitude (mL). The frequency-area distributions (FADs) of several landslide inventories were modelled and theoretical curves were established to identify the mL for any landslide inventory. In the observed landslide inventories, a divergence from the power-law distribution was recognized for the small landslides, referred to as the rollover, and this feature was taken into account in the established model. However, these analyses are based on a relatively limited number of inventories, each with a different triggering mechanism. Existing definition of the mL include some subjectivity, since it is based on a visual comparison between the theoretical curves and the FAD of the medium and large landslides. Additionally, the existed definition of mL introduces uncertainty due to the ambiguity in both the physical explanation of the rollover and its functional form. Here we focus on earthquake-induced landslides (EQIL) and aim to provide a rigorous method to estimate the mL and total landslide area of EQIL. We have gathered 36 EQIL inventories from around the globe. Using these inventories, we have evaluated existing explanations of the rollover and proposed an alternative explanation given the new data. Next, we propose a method to define the EQIL FAD curves, mL and to estimate the total landslide area. We utilize the total landslide areas obtained from inventories to compare them with our estimations and to validate our methodology. The results show that we calculate landslide magnitudes more accurately than previous methods.

Identifying and characterizing major emission point sources as a basis for geospatial distribution of mercury emissions inventories

NASA Astrophysics Data System (ADS)

Steenhuisen, Frits; Wilson, Simon J.

2015-07-01

Mercury is a global pollutant that poses threats to ecosystem and human health. Due to its global transport, mercury contamination is found in regions of the Earth that are remote from major emissions areas, including the Polar regions. Global anthropogenic emission inventories identify important sectors and industries responsible for emissions at a national level; however, to be useful for air transport modelling, more precise information on the locations of emission is required. This paper describes the methodology applied, and the results of work that was conducted to assign anthropogenic mercury emissions to point sources as part of geospatial mapping of the 2010 global anthropogenic mercury emissions inventory prepared by AMAP/UNEP. Major point-source emission sectors addressed in this work account for about 850 tonnes of the emissions included in the 2010 inventory. This work allocated more than 90% of these emissions to some 4600 identified point source locations, including significantly more point source locations in Africa, Asia, Australia and South America than had been identified during previous work to geospatially-distribute the 2005 global inventory. The results demonstrate the utility and the limitations of using existing, mainly public domain resources to accomplish this work. Assumptions necessary to make use of selected online resources are discussed, as are artefacts that can arise when these assumptions are applied to assign (national-sector) emissions estimates to point sources in various countries and regions. Notwithstanding the limitations of the available information, the value of this procedure over alternative methods commonly used to geo-spatially distribute emissions, such as use of 'proxy' datasets to represent emissions patterns, is illustrated. Improvements in information that would facilitate greater use of these methods in future work to assign emissions to point-sources are discussed. These include improvements to both national (geo-referenced) emission inventories and also to other resources that can be employed when such national inventories are lacking.

Inventory of File gfs.t06z.wafs_grb45f06.nouswafs.grib

Science.gov Websites

Wind [m/s] 004 100 mb VGRD 6 hour fcst V-Component of Wind [m/s] 005 125 mb HGT 6 hour fcst Wind [m/s] 008 125 mb VGRD 6 hour fcst V-Component of Wind [m/s] 009 150 mb HGT 6 hour fcst Wind [m/s] 012 150 mb VGRD 6 hour fcst V-Component of Wind [m/s] 013 175 mb HGT 6 hour fcst

Inventory of File sref_nmb.t03z.pgrb212.ctl.grib2

Science.gov Websites

10 m above ground UGRD 3 hour fcst U-Component of Wind [m/s] ENS=low-res ctl 004 10 m above ground VGRD 3 hour fcst V-Component of Wind [m/s] ENS=low-res ctl 005 mean sea level PRMSL 3 hour fcst 250 mb UGRD 3 hour fcst U-Component of Wind [m/s] ENS=low-res ctl 014 500 mb UGRD 3 hour fcst U

The Joint Logistics-Over-the-Shore (LOTS) Test and Evaluation Report. Volume I. Conduct of the Test.

DTIC Science & Technology

1979-01-05

and deployed with available Military Sealift Command (MSC) shipping. The Army LOTS equipment inventory includes DeLong barges/piers which exceed all...main components of the facility, all items in the Army inventory , can be seen in Figure 2.17. They are: 0 The B DeLong barge, * The 300-ton capacity P&H...only) (1) 8-9 Preliminary Operatio s. The administrative move from Ft. Eustis to the Norfolk Naval Suppiy Center for ship loading and the subsequent

Western redcedar—a forest resource in transition.

Treesearch

Charles L. Bolsinger

1979-01-01

Available information on inventory, growth, price, and consumption trends for western redcedar in Western United States is compiled. The future of western redcedar as a product resource and component of the forest is discussed.

Development of a statewide landslide inventory program.

DOT National Transportation Integrated Search

2003-02-01

Development of a comprehensive geotechnical database for risk management of highway landslide problems is described. Computer software selected to program the client/server application in a data window, components and structure of the geotechnical da...

An Inventory of Ohio's Land Use/Land Cover as Seen by Landsat

NASA Technical Reports Server (NTRS)

Schaal, Gary M.

1977-01-01

LANDSAT 2 (Land Satellite) was launched at Vandenburg, AFB, California on January 22, 1975. The satellite orbits the earth at an altitude of about 920 km (570 miles) and scans the earth's surface in a continuous track 185 km (115 miles) wide. LANDSAT 2 passes over the same spot every 18 days transmitting scanned data to receiving stations scattered around the globe. LANDSAT's continuously-scanning sensors provide useful information about the earth, one of the most important categories being land use. The statistics contained in the appendices of this report represent acreage and percentage of seven types of land cover in Ohio as seen by LANDSAT. The inventory represents a trial effort at determining the Sate's land cover by a method which is inexpensive, reliable, accurate and rapid. Given a successful method, the inventory and periodic updates could provide information to land use decision-makers and, over a period of time, would reveal patterns of land use change. Technical aspects of the project (process, methodology, and verification) are discussed in Schaal (1977) and Schmidt (1976).

Reading the Complex Skipper Butterfly Fauna of One Tropical Place

PubMed Central

Janzen, Daniel H.; Hallwachs, Winnie; Burns, John M.; Hajibabaei, Mehrdad; Bertrand, Claudia; Hebert, Paul D. N.

2011-01-01

Background An intense, 30-year, ongoing biodiversity inventory of Lepidoptera, together with their food plants and parasitoids, is centered on the rearing of wild-caught caterpillars in the 120,000 terrestrial hectares of dry, rain, and cloud forest of Area de Conservacion Guanacaste (ACG) in northwestern Costa Rica. Since 2003, DNA barcoding of all species has aided their identification and discovery. We summarize the process and results for a large set of the species of two speciose subfamilies of ACG skipper butterflies (Hesperiidae) and emphasize the effectiveness of barcoding these species (which are often difficult and time-consuming to identify). Methodology/Principal Findings Adults are DNA barcoded by the Biodiversity Institute of Ontario, Guelph, Canada; and they are identified by correlating the resulting COI barcode information with more traditional information such as food plant, facies, genitalia, microlocation within ACG, caterpillar traits, etc. This process has found about 303 morphologically defined species of eudamine and pyrgine Hesperiidae breeding in ACG (about 25% of the ACG butterfly fauna) and another 44 units indicated by distinct barcodes (n = 9,094), which may be additional species and therefore may represent as much as a 13% increase. All but the members of one complex can be identified by their DNA barcodes. Conclusions/Significance Addition of DNA barcoding to the methodology greatly improved the inventory, both through faster (hence cheaper) accurate identification of the species that are distinguishable without barcoding, as well as those that require it, and through the revelation of species “hidden” within what have long been viewed as single species. Barcoding increased the recognition of species-level specialization. It would be no more appropriate to ignore barcode data in a species inventory than it would be to ignore adult genitalia variation or caterpillar ecology. PMID:21857895

Los Alamos National Laboratory: A guide to records series supporting epidemiologic studies conducted for the Department of Energy

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-01-01

The purpose of this guide is to describe each series of records that pertains to the epidemiologic studies conducted by the Epidemiology Section of the Occupational Medicine Group (ESH-2) at the Department of Energy`s (DOE) Los Alamos National Laboratory (LANL) in Los Alamos, New Mexico. The records described in this guide relate to occupational studies performed by the Epidemiology Section, including those pertaining to workers at LANL, Mound Plant, Oak Ridge Reservation, Pantex Plant, Rocky Flats Plant, and Savannah River Site. Also included are descriptions of other health-related records generated or collected by the Epidemiology Section and a small setmore » of records collected by the Industrial Hygiene and Safety Group. This guide is not designed to describe the universe of records generated by LANL which may be used for epidemiologic studies of the LANL work force. History Associates Incorporated (HAI) prepared this guide as part of its work as the support services contractor for DOE`s Epidemiologic Records Inventory Project. This introduction briefly describes the Epidemiologic Records Inventory Project, HAI`s role in the project, the history of LANL the history and functions of LANL`s Health Division and Epidemiology Section, and the various epidemiologic studies performed by the Epidemiology Section. It provides information on the methodology that HAI used to inventory and describe records housed in the offices of the LANL Epidemiology Section in Technical Area 59 and at the LANL Records Center. Other topics include the methodology used to produce the guide, the arrangement of the detailed record series descriptions, and information concerning access to records repositories.« less

Annual land cover change mapping using MODIS time series to improve emissions inventories.

NASA Astrophysics Data System (ADS)

López Saldaña, G.; Quaife, T. L.; Clifford, D.

2014-12-01

Understanding and quantifying land surface changes is necessary for estimating greenhouse gas and ammonia emissions, and for meeting air quality limits and targets. More sophisticated inventories methodologies for at least key emission source are needed due to policy-driven air quality directives. Quantifying land cover changes on an annual basis requires greater spatial and temporal disaggregation of input data. The main aim of this study is to develop a methodology for using Earth Observations (EO) to identify annual land surface changes that will improve emissions inventories from agriculture and land use/land use change and forestry (LULUCF) in the UK. First goal is to find the best sets of input features that describe accurately the surface dynamics. In order to identify annual and inter-annual land surface changes, a times series of surface reflectance was used to capture seasonal variability. Daily surface reflectance images from the Moderate Resolution Imaging Spectroradiometer (MODIS) at 500m resolution were used to invert a Bidirectional Reflectance Distribution Function (BRDF) model to create the seamless time series. Given the limited number of cloud-free observations, a BRDF climatology was used to constrain the model inversion and where no high-scientific quality observations were available at all, as a gap filler. The Land Cover Map 2007 (LC2007) produced by the Centre for Ecology & Hydrology (CEH) was used for training and testing purposes. A prototype land cover product was created for 2006 to 2008. Several machine learning classifiers were tested as well as different sets of input features going from the BRDF parameters to spectral Albedo. We will present the results of the time series development and the first exercises when creating the prototype land cover product.

Development of the Sri Lankan Early Teenagers' Violence Inventory: An Instrument to Measure Peer Violence in Schools

PubMed Central

Seneviratne, Rohini; Østbye, Truls; Lynch, Catherine; Sandøy, Ingvild Fossgard

2014-01-01

This study was designed to develop an inventory to measure peer violence among early teens (13–15 years of age) in schools in Sri Lanka. Development of SLETVI was carried out in two phases. In phase I, development of an operational definition for peer violence, identification, and finalizing violent acts for inventory was done by a combination of qualitative methods: a comprehensive literature review, focus group discussions among 13–15-year-old adolescents, their teachers and parents, and consultative meetings with experts in the field. Inventory was then pretested. In phase II, elaboration of SLETVI was carried out by administering it to a sample of 1700 adolescents (13–15 years old). Exploratory factor analysis using principal component analysis was performed separately for experiences of victimization and perpetration. Test-retest reliability of SLETVI was assessed. SLETVI included 37 items in three factors: “less severe violence,” “severe physical,” and “severe relational” violence. Combined use of qualitative and quantitative methods enabled development of a culturally valid and reliable operational inventory to assess early teenagers' peer violence in Sri Lankan and other South Asian schools. PMID:25061607

Inventory of File sref.t03z.pgrb212_SPC.prob_3hrly.gri

Science.gov Websites

-GWD analysis Zonal Flux of Gravity Wave Stress [prob] prob =1 002 entire atmosphere (considered as a as a single layer) VUCSH analysis Vertical U-Component Shear [prob] prob =2 004 entire atmosphere (considered as a single layer) VUCSH analysis Vertical U-Component Shear [prob] prob =3 005 surface APCP 0-3

Inventory of File sref.t03z.pgrb216_SPC.prob_3hrly.gri

Science.gov Websites

-GWD analysis Zonal Flux of Gravity Wave Stress [prob] prob =1 002 entire atmosphere (considered as a as a single layer) VUCSH analysis Vertical U-Component Shear [prob] prob =2 004 entire atmosphere (considered as a single layer) VUCSH analysis Vertical U-Component Shear [prob] prob =3 005 surface APCP 0-3

Inventory of File sref.t03z.pgrb243_SPC.prob_3hrly.gri

Science.gov Websites

-GWD analysis Zonal Flux of Gravity Wave Stress [prob] prob =1 002 entire atmosphere (considered as a as a single layer) VUCSH analysis Vertical U-Component Shear [prob] prob =2 004 entire atmosphere (considered as a single layer) VUCSH analysis Vertical U-Component Shear [prob] prob =3 005 surface APCP 0-3