Loudness perception and speech intensity control in Parkinson's disease.

PubMed

Clark, Jenna P; Adams, Scott G; Dykstra, Allyson D; Moodie, Shane; Jog, Mandar

2014-01-01

The aim of this study was to examine loudness perception in individuals with hypophonia and Parkinson's disease. The participants included 17 individuals with hypophonia related to Parkinson's disease (PD) and 25 age-equivalent controls. The three loudness perception tasks included a magnitude estimation procedure involving a sentence spoken at 60, 65, 70, 75 and 80 dB SPL, an imitation task involving a sentence spoken at 60, 65, 70, 75 and 80 dB SPL, and a magnitude production procedure involving the production of a sentence at five different loudness levels (habitual, two and four times louder and two and four times quieter). The participants with PD produced a significantly different pattern and used a more restricted range than the controls in their perception of speech loudness, imitation of speech intensity, and self-generated estimates of speech loudness. The results support a speech loudness perception deficit in PD involving an abnormal perception of externally generated and self-generated speech intensity. Readers will recognize that individuals with hypophonia related to Parkinson's disease may demonstrate a speech loudness perception deficit involving the abnormal perception of externally generated and self-generated speech intensity. Copyright © 2014 Elsevier Inc. All rights reserved.

Gypchek®: past and future strategies for use

Treesearch

J. D. Podgwaite

1985-01-01

The development of the gypsy moth nucleopolyhedrosis virus product Gypchek, and strategies for its use, have been largely patterned after conventional pesticide technology. Prior to Gypchek registration with the Environmental Protection Agency in 1978, several field tests involving variations in virus product, application hardware, dose rates, timing and formulation...

Cognate Facilitation in Sentence Context--Translation Production by Interpreting Trainees and Non-Interpreting Trilinguals

ERIC Educational Resources Information Center

Lijewska, Agnieszka; Chmiel, Agnieszka

2015-01-01

Conference interpreters form a special case of language users because the simultaneous interpretation practice requires very specific lexical processing. Word comprehension and production in respective languages is performed under strict time constraints and requires constant activation of the involved languages. The present experiment aimed at…

Neural correlates of nesting behavior in zebra finches (Taeniopygia guttata).

PubMed

Hall, Zachary J; Bertin, Marion; Bailey, Ida E; Meddle, Simone L; Healy, Susan D

2014-05-01

Nest building in birds involves a behavioral sequence (nest material collection and deposition in the nest) that offers a unique model for addressing how the brain sequences motor actions. In this study, we identified brain regions involved in nesting behavior in male and female zebra finches (Taeniopygia guttata). We used Fos immunohistochemistry to quantify production of the immediate early gene protein product Fos (a molecular indicator of neuronal activity) in the brain correlated this expression with the variation in nesting behavior. Using this technique, we found that neural circuitry involved in motor sequencing, social behavior, reward and motivation were active during nesting. Within pairs of nesting birds, the number of times a male picked up or deposited nesting material and the amount of time a female spent in the nest explained the variation in Fos expression in the anterior motor pathway, social behavior network, and reward neural circuits. Identification of the brain regions that are involved in nesting enables us to begin studying the roles of motor sequencing, context, and reward in construction behavior at the neural level. Copyright © 2014 Elsevier B.V. All rights reserved.

Neural correlates of nesting behavior in zebra finches (Taeniopygia guttata)

PubMed Central

Hall, Zachary J.; Bertin, Marion; Bailey, Ida E.; Meddle, Simone L.; Healy, Susan D.

2014-01-01

Nest building in birds involves a behavioral sequence (nest material collection and deposition in the nest) that offers a unique model for addressing how the brain sequences motor actions. In this study, we identified brain regions involved in nesting behavior in male and female zebra finches (Taeniopygia guttata). We used Fos immunohistochemistry to quantify production of the immediate early gene protein product Fos (a molecular indicator of neuronal activity) in the brain correlated this expression with the variation in nesting behavior. Using this technique, we found that neural circuitry involved in motor sequencing, social behavior, reward and motivation were active during nesting. Within pairs of nesting birds, the number of times a male picked up or deposited nesting material and the amount of time a female spent in the nest explained the variation in Fos expression in the anterior motor pathway, social behavior network, and reward neural circuits. Identification of the brain regions that are involved in nesting enables us to begin studying the roles of motor sequencing, context, and reward in construction behavior at the neural level. PMID:24508238

Time Perception in Severe Traumatic Brain Injury Patients: A Study Comparing Different Methodologies

ERIC Educational Resources Information Center

Mioni, G.; Mattalia, G.; Stablum, F.

2013-01-01

In this study, we investigated time perception in patients with traumatic brain injury (TBI). Fifteen TBI patients and 15 matched healthy controls participated in the study. Participants were tested with durations above and below 1s on three different temporal tasks that involved time reproduction, production, and discrimination tasks. Data…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anameric, B.; Kawatra, S.K.

The pig iron nugget process is gaining in importance as an alternative to the traditional blast furnace. Throughout the process, self-reducing-fluxing dried greenballs composed of iron ore concentrate, reducing-carburizing agent (coal), flux (limestone) and binder (bentonite) are heat-treated. During the heat treatment, dried greenballs are first transformed into direct reduced iron (DRI), then to transition direct reduced iron (TDRI) and finally to pig iron nuggets. The furnace temperature and/or residence time and the corresponding levels of carburization, reduction and metallization dictate these transformations. This study involved the determination of threshold furnace temperatures and residence times for completion of all ofmore » the transformation reactions and pig iron nugget production. The experiments involved the heat treatment of self-reducing-fluxing dried greenballs at various furnace temperatures and residence times. The products of these heat treatments were identified by utilizing optical microscopy, apparent density and microhardness measurements.« less

Mathematics Framework, Kindergarten-Grade 12.

ERIC Educational Resources Information Center

Texas Education Agency, Austin.

This publication should help educators provide a mathematics program that emphasizes productive time on task and active involvement of students in mathematics activities. The focus on problem solving is stressed. Time allotments are stated, followed by descriptions of essential elements for kindergarten through grade 8: understanding numbers and…

78 FR 39959 - Production of FHFA Records, Information, and Employee Testimony in Third-Party Legal Proceedings

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-03

... spending public time and money for private purposes. DATES: The effective date of this regulation is... agency employee's work schedule significantly, may involve the agency in issues unrelated to its... resources; (d) Production might assist or hinder employees in doing their work; (e) The records, information...

Behavioral and multimodal neuroimaging evidence for a deficit in brain timing networks in stuttering: a hypothesis and theory

PubMed Central

Etchell, Andrew C.; Johnson, Blake W.; Sowman, Paul F.

2014-01-01

The fluent production of speech requires accurately timed movements. In this article, we propose that a deficit in brain timing networks is one of the core neurophysiological deficits in stuttering. We first discuss the experimental evidence supporting the involvement of the basal ganglia and supplementary motor area (SMA) in stuttering and the involvement of the cerebellum as a possible mechanism for compensating for the neural deficits that underlie stuttering. Next, we outline the involvement of the right inferior frontal gyrus (IFG) as another putative compensatory locus in stuttering and suggest a role for this structure in an expanded core timing-network. Subsequently, we review behavioral studies of timing in people who stutter and examine their behavioral performance as compared to people who do not stutter. Finally, we highlight challenges to existing research and provide avenues for future research with specific hypotheses. PMID:25009487

Are known cyanotoxins involved in the toxicity of picoplanktonic and filamentous North Atlantic marine cyanobacteria?

PubMed

Frazão, Bárbara; Martins, Rosário; Vasconcelos, Vitor

2010-06-21

Eight marine cyanobacteria strains of the genera Cyanobium, Leptolyngbya, Oscillatoria, Phormidium, and Synechococcus were isolated from rocky beaches along the Atlantic Portuguese central coast and tested for ecotoxicity. Strains were identified by morphological characteristics and by the amplification and sequentiation of the 16S rDNA. Bioactivity of dichloromethane, methanol and aqueous extracts was assessed by the Artemia salina bioassay. Peptide toxin production was screened by matrix assisted laser desorption/ionization time of flight mass spectrometry. Molecular analysis of the genes involved in the production of known cyanotoxins such as microcystins, nodularins and cylindrospermopsin was also performed. Strains were toxic to the brine shrimp A. salina nauplii with aqueous extracts being more toxic than the organic ones. Although mass spectrometry analysis did not reveal the production of microcystins or other known toxic peptides, a positive result for the presence of mcyE gene was found in one Leptolyngbya strain and one Oscillatoria strain. The extensive brine shrimp mortality points to the involvement of other unknown toxins, and the presence of a fragment of genes involved in the cyanotoxin production highlight the potential risk of cyanobacteria occurrence on the Atlantic coast.

Are Known Cyanotoxins Involved in the Toxicity of Picoplanktonic and Filamentous North Atlantic Marine Cyanobacteria?

PubMed Central

Frazão, Bárbara; Martins, Rosário; Vasconcelos, Vitor

2010-01-01

Eight marine cyanobacteria strains of the genera Cyanobium, Leptolyngbya, Oscillatoria, Phormidium, and Synechococcus were isolated from rocky beaches along the Atlantic Portuguese central coast and tested for ecotoxicity. Strains were identified by morphological characteristics and by the amplification and sequentiation of the 16S rDNA. Bioactivity of dichloromethane, methanol and aqueous extracts was assessed by the Artemia salina bioassay. Peptide toxin production was screened by matrix assisted laser desorption/ionization time of flight mass spectrometry. Molecular analysis of the genes involved in the production of known cyanotoxins such as microcystins, nodularins and cylindrospermopsin was also performed. Strains were toxic to the brine shrimp A. salina nauplii with aqueous extracts being more toxic than the organic ones. Although mass spectrometry analysis did not reveal the production of microcystins or other known toxic peptides, a positive result for the presence of mcyE gene was found in one Leptolyngbya strain and one Oscillatoria strain. The extensive brine shrimp mortality points to the involvement of other unknown toxins, and the presence of a fragment of genes involved in the cyanotoxin production highlight the potential risk of cyanobacteria occurrence on the Atlantic coast. PMID:20631874

Laser-induced plasma chemistry of the explosive RDX with various metallic nanoparticles.

PubMed

Gottfried, Jennifer L

2012-03-01

The feasibility of exploiting plasma chemistry to study the chemical reactions between metallic nanoparticles and molecular explosives such as cyclotrimethylenetrinitramine (RDX) has been demonstrated. This method, based on laser-induced breakdown spectroscopy, involves the production of nanoparticles in a laser-induced plasma and the simultaneous observation of time-resolved atomic and molecular emission characteristic of the species involved in the intermediate chemical reactions of the nanoenergetic material in the plasma. Using this method, it has been confirmed that the presence of aluminum promotes the ejection process of carbon from the intermediate products of RDX. The time evolution of species formation, the effects of laser pulse energy, and the effects of trace metal content on the chemical reactions were also studied. © 2012 Optical Society of America

Temporal production and visuospatial processing.

PubMed

Benuzzi, Francesca; Basso, Gianpaolo; Nichelli, Paolo

2005-12-01

Current models of prospective timing hypothesize that estimated duration is influenced either by the attentional load or by the short-term memory requirements of a concurrent nontemporal task. In the present study, we addressed this issue with four dual-task experiments. In Exp. 1, the effect of memory load on both reaction time and temporal production was proportional to the number of items of a visuospatial pattern to hold in memory. In Exps. 2, 3, and 4, a temporal production task was combined with two visual search tasks involving either pre-attentive or attentional processing. Visual tasks interfered with temporal production: produced intervals were lengthened proportionally to the display size. In contrast, reaction times increased with display size only when a serial, effortful search was required. It appears that memory and perceptual set size, rather than nonspecific attentional or short-term memory load, can influence prospective timing.

29 CFR 785.32 - Apprenticeship training.

Code of Federal Regulations, 2010 CFR

2010-07-01

... spent in an organized program of related, supplemental instruction by employees working under bona fide apprenticeship programs may be excluded from working time if the following criteria are met: (a) The apprentice...) Such time does not involve productive work or performance of the apprentice's regular duties. If the...

Productive engagement among older Americans: prevalence, patterns, and implications for public policy.

PubMed

Hinterlong, James E

2008-01-01

This study estimates the prevalence of productive engagement among adults aged 60 and over residing in the United States over a nine-year period. We analyze three waves of data from the Americans' Changing Lives Study, which allows the findings to describe the non-institutionalized older American population. Focusing upon five activities--formal paid employment, irregular paid work, unpaid volunteerism, caregiving, and informal assistance to others--we identify changes in the engagement rates, examine the extent to which engagement occurs through single or multiple concurrent activities, and document intra-individual patterns of engagement within and across forms of productive activity, including the continuity, initiation, and cessation of involvement. The findings reveal that late-life productive engagement is widespread, with the majority of older individuals involved in multiple forms of activity concurrently. Non-market-based activities such as caregiving, informal assistance, and volunteering are most prevalent. Initiation and cessation of activities are common and yield more complex patterns and lower rates of non-participation than are revealed in cross-sectional analyses. Time spent in productive engagement is highly variable and exhibits an overall decline across time. We conclude by highlighting policy strategies to increase the availability and quality of opportunities for productive engagement and promote planning for engagement in late life.

Dexter Time: The Space, Time, and Matterings of School Absence Registration

ERIC Educational Resources Information Center

Bodén, Linnea

2016-01-01

Working with a posthumanist approach, this article explores how the computer software Dexter, used for the registration of students' absences and presences, is part of the production of different practices of time, place, space, and matter in Swedish schools. The empirical material engaged with comes from two schools, and the students involved are…

Algorithm for decision support as the tool for control system of industries with variable assortment of products

NASA Astrophysics Data System (ADS)

Ladaniuk, Anatolii; Ivashchuk, Viacheslav; Kisała, Piotr; Askarova, Nursanat; Sagymbekova, Azhar

2015-12-01

Conditions of diversification of enterprise products are involving for changes of higher levels of management hierarchy, so it's leading by tasks correcting and changing schedule for operating of production plans. Ordinary solve by combination of enterprise resource are planning and management execution system often has exclusively statistical content. So, the development of decision support system, that helps to use knowledge about subject for capabilities estimating and order of operation of production object is relevant in this time.

A manufacturer's perspective: Hewlett Packard Y2K action plan.

PubMed

Rapp, W N

1999-01-01

Medical device manufacturers must ensure that their devices are safe and effective including investigating issues involved with the century rollover. Manufacturers must begin early to evaluate their products in order to allow time to correct and distribute these product corrections and communicate to their customers so they can prepare for the Y2K event.

Method of controlling a resin curing process. [for fiber reinforced composites

NASA Technical Reports Server (NTRS)

Webster, Charles Neal (Inventor); Scott, Robert O. (Inventor)

1989-01-01

The invention relates to an analytical technique for controlling the curing process of fiber-reinforced composite materials that are formed using thermosetting resins. The technique is the percent gel method and involves development of a time-to-gel equation as a function of temperature. From this equation a rate-of-gel equation is then determined, and a percent gel is calculated which is the product of rate-of-gel times time. Percent gel accounting is used to control the proper pressure application point in an autoclave cure process to achieve desired properties in a production composite part.

When does incivility lead to counterproductive work behavior? Roles of job involvement, task interdependence, and gender.

PubMed

Welbourne, Jennifer L; Sariol, Ana M

2017-04-01

This research investigated the conditions under which exposure to incivility at work was associated with engaging in counterproductive work behavior (CWB). Drawing from stressor-strain and coping frameworks, we predicted that experienced incivility would be associated with engaging in production deviance and withdrawal behavior, and that these relationships would be strongest for employees who had high levels of job involvement and worked under task interdependent conditions. Gender differences in these effects were also investigated. A sample of 250 United States full-time employees from various occupations completed 2 waves (timed 6 weeks apart) of an online survey. Results indicate that employees with high job involvement were more likely to engage in production deviance and withdrawal behavior following exposure to incivility than were employees with low job involvement. The moderating effect of task interdependence varied by gender, such that the relationship between incivility and CWB was strengthened under high task interdependence for female employees, but weakened under high task interdependence for male employees. These findings highlight that certain work conditions can increase employees' susceptibility to the impacts of incivility, leading to harmful outcomes for organizations. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Components of the Motor Program: The Cerebellum as an Internal Clock. Cognitive Science Program, Technical Report No 86-7.

ERIC Educational Resources Information Center

Ivry, Richard B.; Keele, Steven W.

This report summarizes the initial phase of research with neurological patients on timing functions. Parkinsonian, cerebellar, cortical and peripheral neuropathy patients as well as college aged and elderly control subjects were tested on two separate measures of timing functions. The first task involved the production of timed intervals and used…

Overlapping Networks Engaged during Spoken Language Production and Its Cognitive Control

PubMed Central

Wise, Richard J.S.; Mehta, Amrish; Leech, Robert

2014-01-01

Spoken language production is a complex brain function that relies on large-scale networks. These include domain-specific networks that mediate language-specific processes, as well as domain-general networks mediating top-down and bottom-up attentional control. Language control is thought to involve a left-lateralized fronto-temporal-parietal (FTP) system. However, these regions do not always activate for language tasks and similar regions have been implicated in nonlinguistic cognitive processes. These inconsistent findings suggest that either the left FTP is involved in multidomain cognitive control or that there are multiple spatially overlapping FTP systems. We present evidence from an fMRI study using multivariate analysis to identify spatiotemporal networks involved in spoken language production in humans. We compared spoken language production (Speech) with multiple baselines, counting (Count), nonverbal decision (Decision), and “rest,” to pull apart the multiple partially overlapping networks that are involved in speech production. A left-lateralized FTP network was activated during Speech and deactivated during Count and nonverbal Decision trials, implicating it in cognitive control specific to sentential spoken language production. A mirror right-lateralized FTP network was activated in the Count and Decision trials, but not Speech. Importantly, a second overlapping left FTP network showed relative deactivation in Speech. These three networks, with distinct time courses, overlapped in the left parietal lobe. Contrary to the standard model of the left FTP as being dominant for speech, we revealed a more complex pattern within the left FTP, including at least two left FTP networks with competing functional roles, only one of which was activated in speech production. PMID:24966373

Overlapping networks engaged during spoken language production and its cognitive control.

PubMed

Geranmayeh, Fatemeh; Wise, Richard J S; Mehta, Amrish; Leech, Robert

2014-06-25

Spoken language production is a complex brain function that relies on large-scale networks. These include domain-specific networks that mediate language-specific processes, as well as domain-general networks mediating top-down and bottom-up attentional control. Language control is thought to involve a left-lateralized fronto-temporal-parietal (FTP) system. However, these regions do not always activate for language tasks and similar regions have been implicated in nonlinguistic cognitive processes. These inconsistent findings suggest that either the left FTP is involved in multidomain cognitive control or that there are multiple spatially overlapping FTP systems. We present evidence from an fMRI study using multivariate analysis to identify spatiotemporal networks involved in spoken language production in humans. We compared spoken language production (Speech) with multiple baselines, counting (Count), nonverbal decision (Decision), and "rest," to pull apart the multiple partially overlapping networks that are involved in speech production. A left-lateralized FTP network was activated during Speech and deactivated during Count and nonverbal Decision trials, implicating it in cognitive control specific to sentential spoken language production. A mirror right-lateralized FTP network was activated in the Count and Decision trials, but not Speech. Importantly, a second overlapping left FTP network showed relative deactivation in Speech. These three networks, with distinct time courses, overlapped in the left parietal lobe. Contrary to the standard model of the left FTP as being dominant for speech, we revealed a more complex pattern within the left FTP, including at least two left FTP networks with competing functional roles, only one of which was activated in speech production. Copyright © 2014 Geranmayeh et al.

Biokinetic model-based multi-objective optimization of Dunaliella tertiolecta cultivation using elitist non-dominated sorting genetic algorithm with inheritance.

PubMed

Sinha, Snehal K; Kumar, Mithilesh; Guria, Chandan; Kumar, Anup; Banerjee, Chiranjib

2017-10-01

Algal model based multi-objective optimization using elitist non-dominated sorting genetic algorithm with inheritance was carried out for batch cultivation of Dunaliella tertiolecta using NPK-fertilizer. Optimization problems involving two- and three-objective functions were solved simultaneously. The objective functions are: maximization of algae-biomass and lipid productivity with minimization of cultivation time and cost. Time variant light intensity and temperature including NPK-fertilizer, NaCl and NaHCO 3 loadings are the important decision variables. Algal model involving Monod/Andrews adsorption kinetics and Droop model with internal nutrient cell quota was used for optimization studies. Sets of non-dominated (equally good) Pareto optimal solutions were obtained for the problems studied. It was observed that time variant optimal light intensity and temperature trajectories, including optimum NPK fertilizer, NaCl and NaHCO 3 concentration has significant influence to improve biomass and lipid productivity under minimum cultivation time and cost. Proposed optimization studies may be helpful to implement the control strategy in scale-up operation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Creating Documentaries.

ERIC Educational Resources Information Center

Beasley, Augie

1994-01-01

Explains production techniques involved in making student documentaries on video. Highlights include student research; script writing; narration; the use of interviews; incorporating visual materials such as maps and photographs; camera techniques; demonstrations; editing; and time limits. (Contains six references.) (LRW)

Enterobacter gergoviae membrane modifications are involved in the adaptive response to preservatives used in cosmetic industry.

PubMed

Périamé, Marina; Pagès, Jean-Marie; Davin-Regli, Anne

2015-01-01

The objective of this study was to understand the adaptive mechanisms in Enterobacter gergoviae which are involved in recurrent contaminations in cosmetic products that are incorporated with preservatives. Bacterial strains from two backgrounds were examined for a profound understanding of the mechanisms of adaptation against preservatives. It included a series of Ent. gergoviae strain-ATCC 33028 derivatives, isolated using increasing methylisothiazolinone-chloromethylisothiazolinone (MIT-CMIT) and triclosan concentrations. The other series was of Ent. gergoviae isolates from cosmetic products exhibiting MIT-CMIT and triclosan resistance. We evaluated the outer membrane protein modifications and efflux mechanisms activities responsible for the resistant trait via immunoblotting assays. Additionally, for understanding the efflux activity real-time efflux, experiments were performed. A cross-insusceptibility between preservatives and some disinfectants was observed in MIT-CMIT-resistant derivative isolates, but antibiotics susceptibility was not altered. Resistance to EDTA was significant in all preservatives insusceptible derivative strains, indicating modifications in the LPS layer. Furthermore, an array of real-time efflux assays indicated different activity levels while no variations were detected in porins and AcrAB-TolC pumps production. Overexpression of a specific flagellin-type protein was observed in one of the MIT-CMIT- and triclosan-resistant strains. Another candidate, a 25-kDa peroxiredoxin enzyme involved in oxidative detoxification, was identified to be overexpressed in MIT-CMIT derivative. A similar profile was also observed among strains isolated from cosmetic products. Our study highlights the existence of adaptive mechanisms such as overexpression of detoxifying enzymes, flagellin, modification of membrane structure/function in Ent. gergoviae. They might be involved in recurrent episodes of contaminations occurring in the cosmetic production lines. No cross-resistance could be observed with antibiotics when MICs to preservatives were increased; however, a decrease in the disinfectants bactericidal effects was confirmed in preservative-tolerant strains. This will impact industry disinfection strategies treatment against bacteria. © 2014 The Society for Applied Microbiology.

Cerebellar contributions to motor timing: a PET study of auditory and visual rhythm reproduction.

PubMed

Penhune, V B; Zattore, R J; Evans, A C

1998-11-01

The perception and production of temporal patterns, or rhythms, is important for both music and speech. However, the way in which the human brain achieves accurate timing of perceptual input and motor output is as yet little understood. Central control of both motor timing and perceptual timing across modalities has been linked to both the cerebellum and the basal ganglia (BG). The present study was designed to test the hypothesized central control of temporal processing and to examine the roles of the cerebellum, BG, and sensory association areas. In this positron emission tomography (PET) activation paradigm, subjects reproduced rhythms of increasing temporal complexity that were presented separately in the auditory and visual modalities. The results provide support for a supramodal contribution of the lateral cerebellar cortex and cerebellar vermis to the production of a timed motor response, particularly when it is complex and/or novel. The results also give partial support to the involvement of BG structures in motor timing, although this may be more directly related to implementation of the motor response than to timing per se. Finally, sensory association areas and the ventrolateral frontal cortex were found to be involved in modality-specific encoding and retrieval of the temporal stimuli. Taken together, these results point to the participation of a number of neural structures in the production of a timed motor response from an external stimulus. The role of the cerebellum in timing is conceptualized not as a clock or counter but simply as the structure that provides the necessary circuitry for the sensory system to extract temporal information and for the motor system to learn to produce a precisely timed response.

Placing and preserving priorities: projects, productivity, progress and people

PubMed Central

Babiak, John

1998-01-01

High throughput screening (HTS) involves using automated equipment to test a large number of samples against a defined molecular target to identify a reasonable number of active molecules in a timely fashion. Major factors which can influence priorities for the limited resources of the HTS group are projects, productivity, progress and people. The challenge to the HTS group is to provide excellent and timely screening services, but still devote efforts to new technologies and personnel development. This article explains why these factors are so important. PMID:18924829

A graphic approach to include dissipative-like effects in reversible thermal cycles

NASA Astrophysics Data System (ADS)

Gonzalez-Ayala, Julian; Arias-Hernandez, Luis Antonio; Angulo-Brown, Fernando

2017-05-01

Since the decade of 1980's, a connection between a family of maximum-work reversible thermal cycles and maximum-power finite-time endoreversible cycles has been established. The endoreversible cycles produce entropy at their couplings with the external heat baths. Thus, this kind of cycles can be optimized under criteria of merit that involve entropy production terms. Meanwhile the relation between the concept of work and power is quite direct, apparently, the finite-time objective functions involving entropy production have not reversible counterparts. In the present paper we show that it is also possible to establish a connection between irreversible cycle models and reversible ones by means of the concept of "geometric dissipation", which has to do with the equivalent role of a deficit of areas between some reversible cycles and the Carnot cycle and actual dissipative terms in a Curzon-Ahlborn engine.

Power Ultrasound to Process Dairy Products

NASA Astrophysics Data System (ADS)

Bermúdez-Aguirre, Daniela; Barbosa-Cánovas, Gustavo V.

Conventional methods of pasteurizing milk involve the use of heat regardless of treatment (batch, high temperature short time - HTST or ultra high temperature - UHT sterilization), and the quality of the milk is affected because of the use of high temperatures. Consequences of thermal treatment are a decrease in nutritional properties through the destruction of vitamins or denaturation of proteins, and sometimes the flavor of milk is undesirably changed. These changes are produced at the same time that the goal of the pasteurization process is achieved, which is to have a microbiological safe product, free of pathogenic bacteria, and to reduce the load of deteriorative microorganisms and enzymes, resulting in a product with a longer storage life.

Maximal Voluntary Static Force Production Characteristics of Skeletal Muscle in Children 8-11 Years of Age.

ERIC Educational Resources Information Center

Going, Scott B.; And Others

1987-01-01

A study of maximal voluntary isometric muscle contraction force-time curves among 32 normal, healthy 8- to 11-year-olds performing tasks involving separate muscle groups found that force and maximal rate of force increase were quite reproducible, but time to selected force levels reflected considerable variations. (Author/CB)

Recycling agroindustrial waste by lactic fermentations: coffee pulp silage

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carrizales, V.; Ferrer, J.

1985-04-03

This UNIDO publication on lactic acid fermentation of coffee pulp for feed production covers (1) a process which can be adapted to existing coffee processing plants for drying the product once harvesting time has finished (2) unit operations involved: pressing (optional), silaging, liming and drying (3) experiments, results and discussion, bibliography, process statistics, and diagrams. Additional references: storage, biotechnology, lime, agricultural wastes, recycling, waste utilization.

EOS Data Products Latency and Reprocessing Evaluation

NASA Astrophysics Data System (ADS)

Ramapriyan, H. K.; Wanchoo, L.

2012-12-01

NASA's Earth Observing System (EOS) Data and Information System (EOSDIS) program has been processing, archiving, and distributing EOS data since the launch of Terra platform in 1999. The EOSDIS Distributed Active Archive Centers (DAACs) and Science-Investigator-led Processing Systems (SIPSs) are generating over 5000 unique products with a daily average volume of 1.7 Petabytes. Initially EOSDIS had requirements to make process data products within 24 hours of receiving all inputs needed for generating them. Thus, generally, the latency would be slightly over 24 and 48 hours after satellite data acquisition, respectively, for Level 1 and Level 2 products. Due to budgetary constraints these requirements were relaxed, with the requirement being to avoid a growing backlog of unprocessed data. However, the data providers have been generating these products in as timely a manner as possible. The reduction in costs of computing hardware has helped considerably. It is of interest to analyze the actual latencies achieved over the past several years in processing and inserting the data products into the EOSDIS archives for the users to support various scientific studies such as land processes, oceanography, hydrology, atmospheric science, cryospheric science, etc. The instrument science teams have continuously evaluated the data products since the launches of EOS satellites and improved the science algorithms to provide high quality products. Data providers have periodically reprocessed the previously acquired data with these improved algorithms. The reprocessing campaigns run for an extended time period in parallel with forward processing, since all data starting from the beginning of the mission need to be reprocessed. Each reprocessing activity involves more data than the previous reprocessing. The historical record of the reprocessing times would be of interest to future missions, especially those involving large volumes of data and/or computational loads due to complexity of algorithms. Evaluation of latency and reprocessing times requires some of the product metadata information, such as the beginning and ending time of data acquisition, processing date, and version number. This information for each product is made available by data providers to the ESDIS Metrics System (EMS). The EMS replaced the earlier ESDIS Data Gathering and Reporting System (EDGRS) in FY2005. Since then it has collected information about data products' ingest, archive, and distribution. The analysis of latencies and reprocessing times will provide an insight to the data provider process and identify potential areas of weakness in providing timely data to the user community. Delays may be caused by events such as system unavailability, disk failures, delay in level 0 data delivery, availability of input data, network problems, and power failures. Analysis of metrics will highlight areas for focused examination of root causes for delays. The purposes of this study are to: 1) perform a detailed analysis of latency of selected instrument products for last 6 years; 2) analyze the reprocessed data from various data providers to determine the times taken for reprocessing campaigns; 3) identify potential reasons for any anomalies in these metrics.

77 FR 40494 - Procedures for the Handling of Retaliation Complaints Under Section 219 of the Consumer Product...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-10

... cases involving important or novel legal issues, large numbers of employees, alleged violations that... computation of time before those tribunals and express filing deadlines as days rather than business days...

BGK-MD, Version 1.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haack, Jeffrey; Shohet, Gil

2016-12-02

The software implements a heterogeneous multiscale method (HMM), which involves solving a classical molecular dynamics (MD) problem and then computes the entropy production in order to compute the relaxation times towards equilibrium for use in a Bhatnagar-Gross-Krook (BGK) solver.

The severity of toxic reactions to ephedra: comparisons to other botanical products and national trends from 1993-2002.

PubMed

Woolf, Alan D; Watson, William A; Smolinske, Susan; Litovitz, Toby

2005-01-01

Ephedra is a botanical product widely used to enhance alertness, as a weight loss aide, and as a decongestant. Its reported adverse effects led the Food and Drug Administration (FDA) to ban ephedra-containing products in the United States in 2004. This study's purpose was to compare toxicity from botanical products containing ephedra to nonephedra products. The Toxic Exposure Surveillance System (TESS), a national poison center database, was utilized to determine the number and outcomes of cases involving botanical products reported from 1993-2002. Cases listing both a botanical product and any other drugs or chemicals were excluded a priori. Ten-year hazard rates (moderate outcomes + major outcomes + deaths per 1000 exposures) were used to compare botanical product categories. There were 21,533 toxic exposures with definitive medical outcomes reported over the 10 yrs where a botanical product was the only substance involved. Of these, 4306 (19.9%) had moderate or major medical outcomes and there were two deaths, for an overall hazard score of 200 per 1000 exposures. The number of ephedra reports to poison centers increased 150-fold over the 10-yr period. The hazard rate for products that contained only ephedra was 250 per 1000 exposures and 267 per 1000 exposures for products that contained ephedra and additional ingredients; whereas the hazard score for only nonephedra botanical products was 96 per 1000 exposures. The rate ratios for multibotanical products with ephedra (RR 1.33; 95% C.I. 1.27-1.40) and for single-ingredient ephedra products (RR 1.25; 95% C.I. 1.11-1.40) were both two to six times higher than those of other common botanical products. Yohimbe-containing products had the highest hazard score (417) and rate ratio (2.08; 95% C.I. 1.59-2.80). Ephedra-containing botanical products accounted for a significant number of toxic exposures with severe medical outcomes reported to poison centers. Hazard rate analysis suggests poison center-reported events involving ephedra-containing botanical products were much more likely to result in severe medical outcomes than those involving nonephedra-containing botanical products. These data support recommendations by policymakers that the sale of ephedra should be prohibited to protect consumers. Our data suggest that the botanical product, yohimbe, may also be associated with unacceptably high risks of toxicity and should receive close scrutiny from health policymakers.

Specificity and transfer effects in time production skill: examining the role of attention.

PubMed

Wohldmann, Erica L; Healy, Alice F; Bourne, Lyle E

2012-05-01

Two experiments examined transfer of a prospective, time production skill under conditions involving changes in concurrent task requirements. Positive transfer of the time production skill might be expected only when the attentional demands of the concurrent task were held constant from training to test. However, some positive transfer was found even when the concurrent task at retraining was made either easier or more difficult than the concurrent task learned during training. The amount and direction of transfer depended more on the pacing of the stimuli in the secondary task than on the difficulty of the secondary task, even though difficulty affects attentional demands more. These findings are consistent with the procedural reinstatement principle of skill learning, by which transfer from one task to another depends on an overlap in procedures required by the two skills.

Force-Manipulation Single-Molecule Spectroscopy Studies of Enzymatic Dynamics

NASA Astrophysics Data System (ADS)

Lu, H. Peter; He, Yufan; Lu, Maolin; Cao, Jin; Guo, Qing

2014-03-01

Subtle conformational changes play a crucial role in protein functions, especially in enzymatic reactions involving complex substrate-enzyme interactions and chemical reactions. We applied AFM-enhanced and magnetic tweezers-correlated single-molecule spectroscopy to study the mechanisms and dynamics of enzymatic reactions involved with kinase and lysozyme proteins. Enzymatic reaction turnovers and the associated structure changes of individual protein molecules were observed simultaneously in real-time by single-molecule FRET detections. Our single-molecule spectroscopy measurements of enzymatic conformational dynamics have revealed time bunching effect and intermittent coherence in conformational state change dynamics involving in enzymatic reaction cycles. The coherent conformational state dynamics suggests that the enzymatic catalysis involves a multi-step conformational motion along the coordinates of substrate-enzyme complex formation and product releasing. Our results support a multiple-conformational state model, being consistent with a complementary conformation selection and induced-fit enzymatic loop-gated conformational change mechanism in substrate-enzyme active complex formation.

Efficient estimation of the maximum metabolic productivity of batch systems

DOE PAGES

St. John, Peter C.; Crowley, Michael F.; Bomble, Yannick J.

2017-01-31

Production of chemicals from engineered organisms in a batch culture involves an inherent trade-off between productivity, yield, and titer. Existing strategies for strain design typically focus on designing mutations that achieve the highest yield possible while maintaining growth viability. While these methods are computationally tractable, an optimum productivity could be achieved by a dynamic strategy in which the intracellular division of resources is permitted to change with time. New methods for the design and implementation of dynamic microbial processes, both computational and experimental, have therefore been explored to maximize productivity. However, solving for the optimal metabolic behavior under the assumptionmore » that all fluxes in the cell are free to vary is a challenging numerical task. Here, previous studies have therefore typically focused on simpler strategies that are more feasible to implement in practice, such as the time-dependent control of a single flux or control variable.« less

Loss of Productivity Due to Neck/Shoulder Symptoms and Hand/Arm Symptoms: Results from the PROMO-Study

PubMed Central

IJmker, Stefan; Blatter, Birgitte M.; de Korte, Elsbeth M.

2007-01-01

Introduction The objective of the present study is to describe the extent of productivity loss among computer workers with neck/shoulder symptoms and hand/arm symptoms, and to examine associations between pain intensity, various physical and psychosocial factors and productivity loss in computer workers with neck/shoulder and hand/arm symptoms. Methods A cross-sectional design was used. The study population consisted of 654 computer workers with neck/shoulder or hand/arm symptoms from five different companies. Descriptive statistics were used to describe the occurrence of self-reported productivity loss. Logistic regression analyses were used to examine the associations. Results In 26% of all the cases reporting symptoms, productivity loss was involved, the most often in cases reporting both symptoms (36%). Productivity loss involved sickness absence in 11% of the arm/hand cases, 32% of the neck/shoulder cases and 43% of the cases reporting both symptoms. The multivariate analyses showed statistically significant odds ratios for pain intensity (OR: 1.26; CI: 1.12–1.41), for high effort/no low reward (OR: 2.26; CI: 1.24–4.12), for high effort/low reward (OR: 1.95; CI: 1.09–3.50), and for low job satisfaction (OR: 3.10; CI: 1.44–6.67). Physical activity in leisure time, full-time work and overcommitment were not associated with productivity loss. Conclusion In most computer workers with neck/shoulder symptoms or hand/arm symptoms productivity loss derives from a decreased performance at work and not from sickness absence. Favorable psychosocial work characteristics might prevent productivity loss in symptomatic workers. PMID:17636455

The impact of banners on digital television: the role of program interactivity and product involvement.

PubMed

Cauberghe, Verolien; De Pelsmacker, Patrick

2008-02-01

In a sample of 281 respondents, the effect of a noninteractive and a medium-interactive television program on recall and brand attitudes for low- and high-involvement products advertised in banners during these programs was investigated. Medium-interactive programs resulted in less product and brand recall and recognition of brands in embedded banner advertisements, but generated more positive brand attitudes than noninteractive programs. These effects were more outspoken for a high-involvement product than for a low-involvement product. The impact of perceived program interactivity on brand attitude is fully mediated program valence and involvement for low-involvement products, but not for high-involvement products, for which perceived program interactivity had a direct impact on brand attitude.

Experimental Investigation of the Interaction of Electrothermal Plasmas with Solid Propellants

DTIC Science & Technology

2007-09-14

formation increases propellant burning rate (Koleczko, et al . 2001). The experiments described here were designed to create time and spatially resolved...Pesce-Rodriguez 2004, Koleczko, et al . 2001). Most tests involving plasma propellant interactions involve higher plasma energies than the 3.1 kJ of...product that scatters light. The large jump in pressurization seen in closed bomb plasma ignition tests (Lieb, et al . 2001) during the plasma discharge

Effective Ad-Hoc Committees.

ERIC Educational Resources Information Center

Young, David G.

1983-01-01

Ad-hoc committees may be symbolic, informational, or action committees. A literature survey indicates such committees' structural components include a suprasystem and three subsystems involving linkages, production, and implementation. Other variables include size, personal factors, and timing. All the factors carry implications about ad-hoc…

The theory of active involvement: processes underlying interventions that engage adolescents in message planning and/or production.

PubMed

Greene, Kathryn

2013-01-01

Adolescence is a time of increased risk taking, and recent intervention strategies have included adolescents planning or producing antirisk messages for their peers. Although these projects may generate enthusiasm, we know little about message planning or production as a strategy for changing adolescent decision-making and behavior. This article articulates the Theory of Active Involvement (TAI) to describe and explain the processes through which these active involvement interventions influence adolescents. TAI is based on social cognitive theory's notion of self-regulation and examines multiple perspective taking and activating the self-reflection processes. The theory specifically describes the process of cognitive changes experienced by participants in active involvement interventions. The sequence is conceptualized as starting when engagement with the intervention (arousal and involvement) produces skill and knowledge gains (immediate outcomes) that lead to reflection (perceived discrepancy) and then other cognitions (expectancies, norms, intentions), with the ultimate outcome being behavior change. Engaging the target audience in a process of self-reflection is conceptualized as the crucial ingredient for meaningful and sustainable change in cognitions and behavior. This article provides valuable insight into how active involvement strategies function and how to best design these interventions, particularly those targeting adolescents.

TOXIC EXPOSURES IN CHILDREN INVOLVING LEGALLY AND ILLEGALLY COMMERCIALIZED HOUSEHOLD SANITIZERS

PubMed Central

Campos, Alessandra Marcuz de Souza; Bucaretchi, Fábio; Fernandes, Luciane Cristina Rodrigues; Fernandes, Carla Borrasca; de Capitani, Eduardo Mello; Beck, Ana Raquel Medeiros

2017-01-01

ABSTRACT Objectives: To analyze and to compare clinical repercussions of accidents involving legally and illegally commercialized household sanitizers in children under 7 years of age. Methods: A descriptive cross-sectional design was used to collect data from electronic database of a regional Poison Control Center during one year. Data were analyzed by means of descriptive non-parametric statistics and association tests. Results: The sample had 737 reported cases. Most of the accidents occurred with children under 3 years of age (median: 1 year of age; interquartile interval: 1-3 years of age), at home (92.9%), by ingestion (97.2%). Products involved were cleaning products with low toxicity and no caustic effects (38.9%); caustics (24.1%); hydrocarbons (19.3%); pesticides/rodenticides (16.6%), and other products (1.1%). Seventy accidents were due to exposures to illegal products, mainly caustics (n=47) and rodenticides (n=15). Among the 337 children presenting post-exposure clinical manifestations, the most frequent were vomiting (n=125), oral burns (n=74), cough (n=35), drooling (n=26), and abdominal pain (n=25). Clinical manifestations were significantly more frequent after illegal products exposure (55/70 versus 282/667, p<0.01). Nineteen children had to be hospitalized (caustics, n=17; illegal products, n=12; median time of hospitalization: 2 days), 22 were submitted to esophagogastroduodenoscopy (sodium hydroxide, n=14; illegal products, n=14); and 12 cases had endoscopic alterations (severe in 2). No deaths occurred. Conclusion: Toxic exposures owing to illegal household sanitizer products are associated with greater morbidity when compared with legal ones. PMID:28977311

Supplemental Conceptual Design Study of an Integrated Voice/Data Switching and Multiplexing Technique for an Access Area Exchange

DTIC Science & Technology

1976-11-11

exchange. The basis for this choice was derived from several factors . One was a timing analysis that was made for certain basic time-critical software...randidate 6jrstem designs were developed and _*xamined with respect to L their capability to demonstrate the workability of the basic concept and for factors ...algorithm recuires a bit time completion, while SOF production allows byte timing and the involved = SOF correlation procedure may be perfor-med during

Proteomic analysis of honeybee (Apis mellifera L.) pupae head development.

PubMed

Zheng, Aijuan; Li, Jianke; Begna, Desalegn; Fang, Yu; Feng, Mao; Song, Feifei

2011-01-01

The honeybee pupae development influences its future adult condition as well as honey and royal jelly productions. However, the molecular mechanism that regulates honeybee pupae head metamorphosis is still poorly understood. To further our understand of the associated molecular mechanism, we investigated the protein change of the honeybee pupae head at 5 time-points using 2-D electrophoresis, mass spectrometry, bioinformatics, quantitative real-time polymerase chain reaction and Western blot analysis. Accordingly, 58 protein spots altered their expression across the 5 time points (13-20 days), of which 36 proteins involved in the head organogenesis were upregulated during early stages (13-17 days). However, 22 proteins involved in regulating the pupae head neuron and gland development were upregulated at later developmental stages (19-20 days). Also, the functional enrichment analysis further suggests that proteins related to carbohydrate metabolism and energy production, development, cytoskeleton and protein folding were highly involved in the generation of organs and development of honeybee pupal head. Furthermore, the constructed protein interaction network predicted 33 proteins acting as key nodes of honeybee pupae head growth of which 9 and 4 proteins were validated at gene and protein levels, respectively. In this study, we uncovered potential protein species involved in the formation of honeybee pupae head development along with their specific temporal requirements. This first proteomic result allows deeper understanding of the proteome profile changes during honeybee pupae head development and provides important potential candidate proteins for future reverse genetic research on honeybee pupae head development to improve the performance of related organs.

Total quality assurance

NASA Astrophysics Data System (ADS)

Louzon, E.

1989-12-01

Quality, cost, and schedule are three factors affecting the competitiveness of a company; they require balancing so that products of acceptable quality are delivered, on time and at a competitive cost. Quality costs comprise investment in quality maintenance and failure costs which arise from failure to maintain standards. The basic principle for achieving the required quality at minimum cost is that of prevention of failures, etc., through production control, attention to manufacturing practices, and appropriate management and training. Total quality control involves attention to the product throughout its life cycle, including in-service performance evaluation, servicing, and maintenance.

Sol-gel processing with inorganic metal salt precursors

DOEpatents

Hu, Zhong-Cheng

2004-10-19

Methods for sol-gel processing that generally involve mixing together an inorganic metal salt, water, and a water miscible alcohol or other organic solvent, at room temperature with a macromolecular dispersant material, such as hydroxypropyl cellulose (HPC) added. The resulting homogenous solution is incubated at a desired temperature and time to result in a desired product. The methods enable production of high quality sols and gels at lower temperatures than standard methods. The methods enable production of nanosize sols from inorganic metal salts. The methods offer sol-gel processing from inorganic metal salts.

The Interplay of Proton, Electron, and Metabolite Supply for Photosynthetic H2 Production in Chlamydomonas reinhardtii*

PubMed Central

Doebbe, Anja; Keck, Matthias; La Russa, Marco; Mussgnug, Jan H.; Hankamer, Ben; Tekçe, Ercan; Niehaus, Karsten; Kruse, Olaf

2010-01-01

To obtain a detailed picture of sulfur deprivation-induced H2 production in microalgae, metabolome analyses were performed during key time points of the anaerobic H2 production process of Chlamydomonas reinhardtii. Analyses were performed using gas chromatography coupled to mass spectrometry (GC/MS), two-dimensional gas chromatography combined with time-of-flight mass spectrometry (GCxGC-TOFMS), lipid and starch analysis, and enzymatic determination of fermentative products. The studies were designed to provide a detailed metabolite profile of the solar Bio-H2 production process. This work reports on the differential analysis of metabolic profiles of the high H2-producing strain Stm6Glc4 and the wild-type cc406 (WT) before and during the H2 production phase. Using GCxGC-TOFMS analysis the number of detected peaks increased from 128 peaks, previously detected by GC/MS techniques, to ∼1168. More detailed analysis of the anaerobic H2 production phase revealed remarkable differences between wild-type and mutant cells in a number of metabolic pathways. Under these physiological conditions the WT produced up to 2.6 times more fatty acids, 2.2 times more neutral lipids, and up to 4 times more fermentation products compared with Stm6Glc4. Based on these results, specific metabolic pathways involving the synthesis of fatty acids, neutral lipids, and fermentation products during anaerobiosis in C. reinhardtii have been identified as potential targets for metabolic engineering to further enhance substrate supply for the hydrogenase(s) in the chloroplast. PMID:20581114

Duration judgments in children with ADHD suggest deficient utilization of temporal information rather than general impairment in timing.

PubMed

Radonovich, Krestin J; Mostofsky, Stewart H

2004-09-01

Clinicians, parents, and teachers alike have noted that individuals with ADHD often have difficulties with "time management," which has led some to suggest a primary deficit in time perception in ADHD. Previous studies have implicated the basal ganglia, cerebellum, and frontal lobes in time estimation and production, with each region purported to make different contributions to the processing and utilization of temporal information. Given the observed involvement of the frontal-subcortical networks in ADHD, we examined judgment of durations in children with ADHD (N = 27) and age- and gender-matched control subjects (N = 15). Two judgment tasks were administered: short duration (550 ms) and long duration (4 s). The two groups did not differ significantly in their judgments of short interval durations; however, subjects with ADHD performed more poorly when making judgments involving long intervals. The groups also did not differ on a judgment-of-pitch task, ruling out a generalized deficit in auditory discrimination. Selective impairment in making judgments involving long intervals is consistent with performance by patients with frontal lobe lesions and suggests that there is a deficiency in the utilization of temporal information in ADHD (possibly secondary to deficits in working memory and/or strategy utilization), rather than a problem involving a central timing mechanism.

P2 receptor stimulation induces amyloid precursor protein production and secretion in rat cortical astrocytes.

PubMed

Tran, Minh D

2011-04-04

Amyloid precursor protein (APP) is ubiquitously expressed in a variety of tissues but is predominantly expressed in the brain. The expression of APP has been well studied in neurons but little is known about its presence in astrocytes. The study presented here shows that purinergic signaling is involved in the production and secretion of APP in primary cultures of rat cortical astrocytes. Extracellular ATP caused an increase in APP production and release in a time- and concentration-dependent manner and was inhibited by antagonists of P2 receptors. Further agonist and antagonist studies revealed involvement of P2Y2 and P2Y4 receptors in nucleotide-stimulated production and release of APP. In addition, signaling studies with various protein kinase inhibitors demonstrated that blockade of mitogen-activated protein kinases, but not Akt, inhibited nucleotide-stimulated APP expression and release. These results indicate that APP production and secretion can be regulated by activation of P2Y2/4 receptors coupled to protein kinase signaling pathways and suggest that astrocytes can be a potential source of APP. Published by Elsevier Ireland Ltd.

Effect of growth temperature, surface type and incubation time on the resistance of Staphylococcus aureus biofilms to disinfectants.

PubMed

Abdallah, Marwan; Chataigne, Gabrielle; Ferreira-Theret, Pauline; Benoliel, Corinne; Drider, Djamel; Dhulster, Pascal; Chihib, Nour-Eddine

2014-03-01

The goal of this study was to investigate the effect of the environmental conditions such as the temperature change, incubation time and surface type on the resistance of Staphylococcus aureus biofilms to disinfectants. The antibiofilm assays were performed against biofilms grown at 20 °C, 30 °C and 37 °C, on the stainless steel and polycarbonate, during 24 and 48 h. The involvement of the biofilm matrix and the bacterial membrane fluidity in the resistance of sessile cells were investigated. Our results show that the efficiency of disinfectants was dependent on the growth temperature, the surface type and the disinfectant product. The increase of growth temperature from 20 °C to 37 °C, with an incubation time of 24 h, increased the resistance of biofilms to cationic antimicrobials. This change of growth temperature did not affect the major content of the biofilm matrix, but it decreased the membrane fluidity of sessile cells through the increase of the anteiso-C19 relative amount. The increase of the biofilm resistance to disinfectants, with the rise of the incubation time, was dependent on both growth temperature and disinfectant product. The increase of the biofilm age also promoted increases in the matrix production and the membrane fluidity of sessile cells. The resistance of S. aureus biofilm seems to depend on the environment of the biofilm formation and involves both extracellular matrix and membrane fluidity of sessile cells. Our study represents the first report describing the impact of environmental conditions on the matrix production, sessile cells membrane fluidity and resistance of S. aureus biofilms to disinfectants.

Determination of production run time and warranty length under system maintenance and trade credits

NASA Astrophysics Data System (ADS)

Tsao, Yu-Chung

2012-12-01

Manufacturers offer a warranty period within which they will fix failed products at no cost to customers. Manufacturers also perform system maintenance when a system is in an out-of-control state. Suppliers provide a credit period to settle the payment to manufacturers. This study considers manufacturer's production and warranty decisions for an imperfect production system under system maintenance and trade credit. Specifically, this study uses the economic production quantity to model the decisions under system maintenance and trade credit. These decisions involve how long the production run time and warranty length should be to maximise total profit. This study provides lemmas for the conditions of optimality and develops a theorem and an algorithm for solving the problems described. Numerical examples illustrate the solution procedures and provide a variety of managerial implications. Results show that simultaneously determining production and warranty decisions is superior to only determining production. This study also discusses the effects of the related parameters on manufacturer's decisions and profits. The results of this study are a useful reference for managerial decision-making and administration.

Multiperiod planning tool for multisite pig production systems.

PubMed

Nadal-Roig, E; Plà, L M

2014-09-01

This paper presents a multiperiod planning tool for multisite pig production systems based on Linear Programming (LP). The aim of the model is to help pig managers of multisite systems in making short-term decisions (mainly related to pig transfers between farms and batch management in fattening units) and mid-term or long-term decisions (according to company targets and expansion strategy). The model skeleton follows the structure of a three-site system that can be adapted to any multisite system present in the modern pig industry. There are three basic phases, namely, piglet production, rearing pigs, and fattening. Each phase involves a different set of farms; therefore, transportation between farms and delivering of pigs to the abattoir are under consideration. The model maximizes the total gross margin calculated from the income of sales to the abattoir and the production costs over the time horizon considered. Production cost depends on each type of farm involved in the process. Parameters like number of farms per phase and distance, farm capacity, reproduction management policies, feeding and veterinary expenses, and transportation costs are taken into account. The model also provides a schedule of transfers between farms in terms of animals to be transported and number of trucks involved. The use of the model is illustrated with a case study based on a real instance of a company located in Catalonia (Spain).

Simultaneous detection of Fusarium culmorum and F. graminearum in plant material by duplex PCR with melting curve analysis.

PubMed

Brandfass, Christoph; Karlovsky, Petr

2006-01-23

Fusarium head blight (FHB) is a disease of cereal crops, which has a severe impact on wheat and barley production worldwide. Apart from reducing the yield and impairing grain quality, FHB leads to contamination of grain with toxic secondary metabolites (mycotoxins), which pose a health risk to humans and livestock. The Fusarium species primarily involved in FHB are F. graminearum and F. culmorum. A key prerequisite for a reduction in the incidence of FHB is an understanding of its epidemiology. We describe a duplex-PCR-based method for the simultaneous detection of F. culmorum and F. graminearum in plant material. Species-specific PCR products are identified by melting curve analysis performed in a real-time thermocycler in the presence of the fluorescent dye SYBR Green I. In contrast to multiplex real-time PCR assays, the method does not use doubly labeled hybridization probes. PCR with product differentiation by melting curve analysis offers a cost-effective means of qualitative analysis for the presence of F. culmorum and F. graminearum in plant material. This method is particularly suitable for epidemiological studies involving a large number of samples.

The Extent of Consumer Product Involvement in Paediatric Injuries

PubMed Central

Catchpoole, Jesani; Walker, Sue; Vallmuur, Kirsten

2016-01-01

A challenge in utilising health sector injury data for Product Safety purposes is that clinically coded data have limited ability to inform regulators about product involvement in injury events, given data entry is bound by a predefined set of codes. Text narratives collected in emergency departments can potentially address this limitation by providing relevant product information with additional accompanying context. This study aims to identify and quantify consumer product involvement in paediatric injuries recorded in emergency department-based injury surveillance data. A total of 7743 paediatric injuries were randomly selected from Queensland Injury Surveillance Unit database and associated text narratives were manually reviewed to determine product involvement in the injury event. A Product Involvement Factor classification system was used to categorise these injury cases. Overall, 44% of all reviewed cases were associated with consumer products, with proximity factor (25%) being identified as the most common involvement of a product in an injury event. Only 6% were established as being directly due to the product. The study highlights the importance of utilising injury data to inform product safety initiatives where text narratives can be used to identify the type and involvement of products in injury cases. PMID:27399744

The Extent of Consumer Product Involvement in Paediatric Injuries.

PubMed

Catchpoole, Jesani; Walker, Sue; Vallmuur, Kirsten

2016-07-07

A challenge in utilising health sector injury data for Product Safety purposes is that clinically coded data have limited ability to inform regulators about product involvement in injury events, given data entry is bound by a predefined set of codes. Text narratives collected in emergency departments can potentially address this limitation by providing relevant product information with additional accompanying context. This study aims to identify and quantify consumer product involvement in paediatric injuries recorded in emergency department-based injury surveillance data. A total of 7743 paediatric injuries were randomly selected from Queensland Injury Surveillance Unit database and associated text narratives were manually reviewed to determine product involvement in the injury event. A Product Involvement Factor classification system was used to categorise these injury cases. Overall, 44% of all reviewed cases were associated with consumer products, with proximity factor (25%) being identified as the most common involvement of a product in an injury event. Only 6% were established as being directly due to the product. The study highlights the importance of utilising injury data to inform product safety initiatives where text narratives can be used to identify the type and involvement of products in injury cases.

Primary atmospheric oxidation mechanism for toluene.

PubMed

Baltaretu, Cristian O; Lichtman, Eben I; Hadler, Amelia B; Elrod, Matthew J

2009-01-08

The products of the primary OH-initiated oxidation of toluene were investigated using the turbulent flow chemical ionization mass spectrometry technique at temperatures ranging from 228 to 298 K. A major dienedial-producing pathway was detected for the first time for toluene oxidation, and glyoxal and methylglyoxal were found to be minor primary oxidation products. The results suggest that secondary oxidation processes involving dienedial and epoxide primary products are likely responsible for previous observations of glyoxal and methylglyoxal products from toluene oxidation. Because the dienedial-producing pathway is a null cycle for tropospheric ozone production and glyoxal and methylglyoxal are important secondary organic aerosol precursors, these new findings have important implications for the modeling of toluene oxidation in the atmosphere.

Advances in Breeding Management and Use of Ovulation Induction for Fixed-time AI.

PubMed

Kirkwood, R N; Kauffold, J

2015-07-01

The objective of the breeding herd is the predictable and consistent production of high quality pigs. To achieve this objective, an appropriate number of females need to be mated in each breeding week and they should maintain their pregnancy and deliver large litters. Many factors can impact achievement of optimal sow productivity, particularly breeding management. Most matings will involve artificial insemination (AI), and successful AI requires deposition into the cervix (or beyond) of sufficient viable high quality sperm at an appropriate time relative to ovulation. This is facilitated by improved knowledge of the sow's ovarian function prior to and during her oestrous period. Realization of the importance of establishing an adequate sperm reservoir in the oviduct at an appropriate time relative to ovulation has led to advances in the management of AI. The future of AI will likely involve insemination of single doses of high genetic merit semen, potentially having a reduced sperm concentration which is made possible by knowledge of the effect of site of sperm deposition on sow fertility. In particular, knowledge of when a sow is likely to ovulate during a natural or induced oestrous period will prove invaluable in the maintenance of herd productivity. This review will examine options for breeding management, including the control of oestrus and ovulation, on sow herd reproductive performance. © 2015 Blackwell Verlag GmbH.

Estimation of Fine and Oversize Particle Ratio in a Heterogeneous Compound with Acoustic Emissions.

PubMed

Nsugbe, Ejay; Ruiz-Carcel, Cristobal; Starr, Andrew; Jennions, Ian

2018-03-13

The final phase of powder production typically involves a mixing process where all of the particles are combined and agglomerated with a binder to form a single compound. The traditional means of inspecting the physical properties of the final product involves an inspection of the particle sizes using an offline sieving and weighing process. The main downside of this technique, in addition to being an offline-only measurement procedure, is its inability to characterise large agglomerates of powders due to sieve blockage. This work assesses the feasibility of a real-time monitoring approach using a benchtop test rig and a prototype acoustic-based measurement approach to provide information that can be correlated to product quality and provide the opportunity for future process optimisation. Acoustic emission (AE) was chosen as the sensing method due to its low cost, simple setup process, and ease of implementation. The performance of the proposed method was assessed in a series of experiments where the offline quality check results were compared to the AE-based real-time estimations using data acquired from a benchtop powder free flow rig. A designed time domain based signal processing method was used to extract particle size information from the acquired AE signal and the results show that this technique is capable of estimating the required ratio in the washing powder compound with an average absolute error of 6%.

One perspective on stakeholder involvement at Hanford.

PubMed

Martin, Todd

2011-11-01

The Hanford nuclear site in Washington State had a major role in the production of nuclear weapons materials during the Manhattan Project in World War II and during the Cold War that followed. The production of weapons-grade radionuclides produced a large amount of radioactive byproducts that have been stored since the mid-1900s at the Hanford Site. These by-product radionuclides have leaked from containment facilities into the groundwater, contaminated buildings used for radionuclide processing, and also contaminated the nuclear reactors used to produce weapons-grade uranium and plutonium. This issue has been a major concern to Hanford stakeholders for several decades, and the U.S. Department of Energy, the U.S. Environmental Protection Agency, and the Washington State Department of Ecology established a Tri-Party Agreement in 1989, at which time Hanford ceased production of nuclear weapons materials and began a major effort to clean up and remediate the Hanford Site's contaminated groundwater, soil, and facilities. This paper describes the concerns of stakeholders in the production of nuclear weapons, the secrecy of Hanford operations, and the potential impacts to public health and the environment from the unintended releases of weapons-grade materials and by-products associated with their production at the Hanford Site. It also describes the involvement of public stakeholders in the development and oversight by the Hanford Advisory Board of the steps that have been taken in cleanup activities at the Hanford Site that began as a major effort about two decades ago. The importance of involvement of the general public and public interest organizations in developing and implementing the Hanford cleanup strategy are described in detail.

X-ray agricultural product inspection: segmentation and classification

NASA Astrophysics Data System (ADS)

Casasent, David P.; Talukder, Ashit; Lee, Ha-Woon

1997-09-01

Processing of real-time x-ray images of randomly oriented and touching pistachio nuts for product inspection is considered. We describe the image processing used to isolate individual nuts (segmentation). This involves a new watershed transform algorithm. Segmentation results on approximately 3000 x-ray (film) and real time x-ray (linescan) nut images were excellent (greater than 99.9% correct). Initial classification results on film images are presented that indicate that the percentage of infested nuts can be reduced to 1.6% of the crop with only 2% of the good nuts rejected; this performance is much better than present manual methods and other automated classifiers have achieved.

Middle-Aged and Older Women in Print Advertisements.

ERIC Educational Resources Information Center

Hollenshead, Carol; Ingersoll, Berit

1982-01-01

Examined images of aging women depicted in periodical advertising over a 10-year period. Analyzed content for frequency, products involved, setting, value orientation, and change over time. Found older women in less than 1% of the advertisements, and no significant changes from 1967-1977. (Author/JAC)

BIODIESEL EDUCATION: GREEN-COLLAR RECRUITING AND ENVIRONMENTAL EDUCATION FOR THE NEXT-GENERATION (BE: GREEN)

EPA Science Inventory

Many high schools and high school teachers are eager to involve relevant, hands-on, project-based materials into their curricula, which address timely climate issues. Incorporating fuel production into the existing curricula and operations of a high school, however, present...

The Theory of Active Involvement: Processes Underlying Interventions that Engage Adolescents in Message Planning and/or Production

PubMed Central

Greene, Kathryn

2013-01-01

Adolescence is a time of increased risk-taking and recent intervention strategies have included adolescents planning or producing anti-risk messages for their peers. Although these projects may generate enthusiasm, we know little about message planning or production as a strategy for changing adolescent decision-making and behavior. The paper articulates the Theory of Active Involvement (TAI) to describe and explain the processes through which these active involvement interventions influence adolescents. TAI is based on social cognitive theory’s notion of self-regulation and examines multiple perspective-taking and activating the self-reflection processes. The theory specifically describes the process of cognitive changes experienced by participants in active involvement interventions. The sequence is conceptualized as starting when engagement with the intervention (arousal and involvement) produces skill and knowledge gains (immediate outcomes) that lead to reflection (perceived discrepancy) and then other cognitions (expectancies, norms, intentions), with the ultimate outcome being behavior change. Engaging the target audience in a process of self-reflection is conceptualized as the crucial ingredient for meaningful and sustainable change in cognitions and behavior. This paper provides valuable insight into how active involvement strategies function and how to best design these interventions, particularly those targeting adolescents. PMID:23980581

Design requirements for SRB production control system. Volume 4: Implementation

NASA Technical Reports Server (NTRS)

1981-01-01

The implementation plan which is presented was developed to provide the means for the successful implementation of the automated production control system. There are three factors which the implementation plan encompasses: detailed planning; phased implementation; and user involvement. The plan is detailed to the task level in terms of necessary activities as the system is developed, refined, installed, and tested. These tasks are scheduled, on a preliminary basis, over a two-and-one-half-year time frame.

Neural correlates of word production stages delineated by parametric modulation of psycholinguistic variables.

PubMed

Wilson, Stephen M; Isenberg, Anna Lisette; Hickok, Gregory

2009-11-01

Word production is a complex multistage process linking conceptual representations, lexical entries, phonological forms and articulation. Previous studies have revealed a network of predominantly left-lateralized brain regions supporting this process, but many details regarding the precise functions of different nodes in this network remain unclear. To better delineate the functions of regions involved in word production, we used event-related functional magnetic resonance imaging (fMRI) to identify brain areas where blood oxygen level-dependent (BOLD) responses to overt picture naming were modulated by three psycholinguistic variables: concept familiarity, word frequency, and word length, and one behavioral variable: reaction time. Each of these variables has been suggested by prior studies to be associated with different aspects of word production. Processing of less familiar concepts was associated with greater BOLD responses in bilateral occipitotemporal regions, reflecting visual processing and conceptual preparation. Lower frequency words produced greater BOLD signal in left inferior temporal cortex and the left temporoparietal junction, suggesting involvement of these regions in lexical selection and retrieval and encoding of phonological codes. Word length was positively correlated with signal intensity in Heschl's gyrus bilaterally, extending into the mid-superior temporal gyrus (STG) and sulcus (STS) in the left hemisphere. The left mid-STS site was also modulated by reaction time, suggesting a role in the storage of lexical phonological codes.

Methods Engineering Workshop for the Shipbuilding Industry

DTIC Science & Technology

1985-09-01

physiological process that reduces the performance capacity and motivation of humans sub- jected to excessive or repeated work stresses. fatigue allowance, Time...often involves basic business fundamentals, motivation , common sense, and the plain hard work of one person doing something. But the accomplishment that...utilize a batch mode form. ” (3) SERGE A. BIRN HAS A TRAINING SCHOOL IN CINCINNATI FOR MTM, MSD, MCD, MOTIVATION -PRODUCTIVITY , TIME STUDY, METHODS

The linear combination of vectors implies the existence of the cross and dot products

NASA Astrophysics Data System (ADS)

Pujol, Jose

2018-07-01

Given two vectors u and v, their cross product u × v is a vector perpendicular to u and v. The motivation for this property, however, is never addressed. Here we show that the existence of the cross and dot products and the perpendicularity property follow from the concept of linear combination, which does not involve products of vectors. For our proof we consider the plane generated by a linear combination of uand v. When looking for the coefficients in the linear combination required to reach a desired point on the plane, the solution involves the existence of a normal vector n = u × v. Our results have a bearing on the history of vector analysis, as a product similar to the cross product but without the perpendicularity requirement existed at the same time. These competing products originate in the work of two major nineteen-century mathematicians, W. Hamilton, and H. Grassmann. These historical aspects are discussed in some detail here. We also address certain aspects of the teaching of u × v to undergraduate students, which is known to carry some difficulties. This includes the algebraic and geometric denitions of u × v, the rule for the direction of u × v, and the pseudovectorial nature of u × v.

Dynamics of Salmonella Shedding and Welfare of Hens in Free-Range Egg Production Systems

PubMed Central

Gole, Vaibhav C.; Woodhouse, Rebecca; Caraguel, Charles; Moyle, Talia; Rault, Jean-Loup; Sexton, Margaret

2016-01-01

ABSTRACT The current study investigated the effect of environmental stressors (i.e., weather changes) on Salmonella shedding in free-range production systems and the correlations with behavioral and physiological measures (i.e., fecal glucocorticoid metabolites). This involved longitudinal and point-in-time surveys of Salmonella shedding and environmental contamination on four commercial free-range layer farms. The shedding of Salmonella was variable across free-range farms and in different seasons. There was no significant effect of season on the Salmonella prevalence during this investigation. In this study, the combined Salmonella most probable number (MPN) counts in environmental (including feces, egg belt, dust, nest box, and ramp) samples were highest in samples collected during the summer season (4th sampling, performed in February). The predominant serovars isolated during this study were Salmonella enterica serovar Mbandaka and Salmonella enterica serovar Typhimurium phage types 135 and 135a. These two phage types were involved in several egg product-related Salmonella outbreaks in humans. Multilocus variable-number tandem-repeat analysis (MLVA) results indicated that MLVA types detected from human food poisoning cases exhibited MLVA patterns similar to the strains isolated during this study. All Salmonella isolates (n = 209) were tested for 15 different genes involved in adhesion, invasion, and survival of Salmonella spp. We also observed variations for sopA, ironA, and misL. There were no positive correlations between fecal corticosterone metabolite (FCM) and Salmonella prevalence and/or shedding in feces. Also, there were no positive correlations between Salmonella prevalence and Salmonella count (log MPN) and any of the other welfare parameters. IMPORTANCE In this study, the welfare of laying hens and Salmonella shedding were compared over a prolonged period of time in field conditions. This study investigated the long-term shedding of Salmonella serovars in a free-range egg production system. Given that there is increasing demand for free-range eggs, it is essential to understand the risks associated with such a production system. PMID:28039133

Dynamics of Salmonella Shedding and Welfare of Hens in Free-Range Egg Production Systems.

PubMed

Gole, Vaibhav C; Woodhouse, Rebecca; Caraguel, Charles; Moyle, Talia; Rault, Jean-Loup; Sexton, Margaret; Chousalkar, Kapil

2017-03-01

The current study investigated the effect of environmental stressors (i.e., weather changes) on Salmonella shedding in free-range production systems and the correlations with behavioral and physiological measures (i.e., fecal glucocorticoid metabolites). This involved longitudinal and point-in-time surveys of Salmonella shedding and environmental contamination on four commercial free-range layer farms. The shedding of Salmonella was variable across free-range farms and in different seasons. There was no significant effect of season on the Salmonella prevalence during this investigation. In this study, the combined Salmonella most probable number (MPN) counts in environmental (including feces, egg belt, dust, nest box, and ramp) samples were highest in samples collected during the summer season (4th sampling, performed in February). The predominant serovars isolated during this study were Salmonella enterica serovar Mbandaka and Salmonella enterica serovar Typhimurium phage types 135 and 135a. These two phage types were involved in several egg product-related Salmonella outbreaks in humans. Multilocus variable-number tandem-repeat analysis (MLVA) results indicated that MLVA types detected from human food poisoning cases exhibited MLVA patterns similar to the strains isolated during this study. All Salmonella isolates ( n = 209) were tested for 15 different genes involved in adhesion, invasion, and survival of Salmonella spp. We also observed variations for sopA , ironA , and misL There were no positive correlations between fecal corticosterone metabolite (FCM) and Salmonella prevalence and/or shedding in feces. Also, there were no positive correlations between Salmonella prevalence and Salmonella count (log MPN) and any of the other welfare parameters. IMPORTANCE In this study, the welfare of laying hens and Salmonella shedding were compared over a prolonged period of time in field conditions. This study investigated the long-term shedding of Salmonella serovars in a free-range egg production system. Given that there is increasing demand for free-range eggs, it is essential to understand the risks associated with such a production system. Copyright © 2017 American Society for Microbiology.

Detection of cfxA and cfxA2, the β-Lactamase Genes of Prevotella spp., in Clinical Samples from Dentoalveolar Infection by Real-Time PCR

PubMed Central

Iwahara, Kaori; Kuriyama, Tomoari; Shimura, Satoshi; Williams, David W.; Yanagisawa, Maki; Nakagawa, Kiyomasa; Karasawa, Tadahiro

2006-01-01

While most bacteria involved in dentoalveolar infection are highly susceptible to penicillin, some Prevotella strains exhibit resistance to this agent through the production of β-lactamase. The production of β-lactamase by Prevotella spp. is in turn associated with the expression of the genes cfxA and cfxA2. The aim of the present study was to determine the prevalence of cfxA and cfxA2 in Prevotella strains by use of real-time PCR and to assess the performance of this molecular method for the direct detection of the genes in 87 clinical samples (pus and root canal exudates) from dentoalveolar infection. Production of β-lactamase by each isolate was determined using a nitrocefin disk. β-Lactamase production was seen in 31% of Prevotella isolates, while all isolates of other species were β-lactamase negative. The penicillin resistance of isolates strongly correlated with the production of β-lactamase. Real-time PCR was found to detect the cfxA and cfxA2 genes from at least five cells per reaction mixture (5 × 103 CFU/ml of pus). Using real-time PCR, the presence of cfxA and cfxA2 was evident for all 48 β-lactamase-positive Prevotella strains. In contrast, neither β-lactamase-negative Prevotella (n = 91) or non-Prevotella (n = 31) strains were positive for the genes. In this study, 31 of the 87 samples yielded β-lactamase-positive Prevotella results, and cfxA and cfxA2 were detected in all 31 samples. Of the 56 culture-negative samples, 8 (14%) were positive for cfxA and cfxA2 by the real-time PCR. This sensitive and specific molecular method offers a rapid clinical test for aiding in the selection of an appropriate antibiotic for treatment of dentoalveolar infection. Although penicillin remains largely effective in the treatment of dentoalveolar infection, β-lactamase-stable antibiotics should be considered in cases in which β-lactamase-positive Prevotella strains are involved. PMID:16390966

Redesigning Schools for 21st Century Technologies: A Middle School with the Power to Improve.

ERIC Educational Resources Information Center

Van Dam, Janet M.

1994-01-01

Describes the processes involved in redesigning and renovating Power Middle School (Michigan) for current and future educational technology, particularly for the media center. Topics discussed include planning; time management; wiring infrastructure; voice and video networks; teacher and student multimedia production rooms; and communications…

Reciprocity: The Key Ingredient in Humane Education Partnerships.

ERIC Educational Resources Information Center

Savesky, Kathy

1985-01-01

Central California Society for the Prevention of Cruelty to Animals (SPCA) and Fresno Unified School District cooperate to promote teacher education and use of SPCA materials in the classrooms. Timing, key persons, building/maintaining contact, teacher involvement, and mutual understanding, which have been important in this productive partnership,…

Referent Salience Affects Second Language Article Use

ERIC Educational Resources Information Center

Trenkic, Danijela; Pongpairoj, Nattama

2013-01-01

The effect of referent salience on second language (L2) article production in real time was explored. Thai (-articles) and French (+articles) learners of English described dynamic events involving two referents, one visually cued to be more salient at the point of utterance formulation. Definiteness marking was made communicatively redundant with…

Changes in Performance in a Management by Objectives Program

ERIC Educational Resources Information Center

Ivancevich, John M.

1974-01-01

Reports on empirically-based longitudinal study of performance in a manufacturing company that uses management by objectives. The performance of the subordinates of 181 MBO-involved supervisors in the production and marketing departments is analyzed. Time lag, reinforcement, and sustaining improvements in performance are considered and analyzed.…

Managing intellectual property to develop medicines for the world's poorest.

PubMed

Fonteilles-Drabek, Sylvie; Reddy, David; Wells, Timothy N C

2017-04-01

It has been argued that patents impede the development and access of medicines for tropical diseases such as malaria. However, we believe that intellectual property can be a key tool to enable timely progression of drug development projects involving multiple partners and to ensure equitable access to successful products.

Secondary Agriculture Student Awareness of International Agriculture and Factors Influencing Student Awareness.

ERIC Educational Resources Information Center

Harbstreit, Steven R.; Welton, Richard F.

1992-01-01

Responses from 1,008 of 1,398 secondary agricultural students in Kansas found (1) limited awareness of international agricultural products and policy, geography, and other cultures; and (2) awareness increased among students with higher grades, longer time in agricultural programs, or involvement in supervised occupational experience. (SK)

Clay Houses

ERIC Educational Resources Information Center

Pedro, Cathy

2011-01-01

In this article, the author describes a project designed for fourth-graders that involves making clay relief sculptures of houses. Knowing the clay houses will become a family heirloom makes this lesson even more worth the time. It takes three classes to plan and form the clay, and another two to underglaze and glaze the final products.

Genotoxic potential of montmorillonite clay mineral and alteration in the expression of genes involved in toxicity mechanisms in the human hepatoma cell line HepG2.

PubMed

Maisanaba, Sara; Hercog, Klara; Filipic, Metka; Jos, Ángeles; Zegura, Bojana

2016-03-05

Montmorillonite, also known as Cloisite(®)Na(+) (CNa(+)), is a natural clay with a wide range of well-documented and novel applications, such as pharmaceutical products or food packaging. Although considered a low toxic product, the expected increased exposure to CNa(+) arises concern on the potential consequences on human and environmental health especially as its genotoxicity has scarcely been investigated so far. Thus, we investigated, for the first time, the influence of non-cytotoxic concentrations of CNa(+) (15.65, 31.25 and 62.5 μg/mL) on genomic instability of human hepatoma cell line (HepG2) by determining the formation of micronuclei (MNi), nucleoplasmic bridges (NPBs) and nuclear buds (NBUDs) with the Cytokinesis block micronucleus cytome assay. Further on we studied the influence of CNa(+) on the expression of several genes involved in toxicity mechanisms using the real-time quantitative PCR. The results showed that CNa(+) increased the number of MNi, while the numbers of NBUDs and NPBs were not affected. In addition it deregulated genes in all the groups studied, mainly after longer time of exposure. These findings provide the evidence that CNa(+) is potentially genotoxic. Therefore further studies that will elucidate the molecular mechanisms involved in toxic activity of CNa(+) are needed for hazard identification and human safety assessment. Copyright © 2015 Elsevier B.V. All rights reserved.

Fluoroscopically guided transforaminal epidural steroid injections at a quaternary-care teaching institution: effect of trainee involvement and patient body mass index on fluoroscopy time and patient dose.

PubMed

Tiegs-Heiden, C A; Murthy, N S; Geske, J R; Diehn, F E; Schueler, B A; Wald, J T; Kaufmann, T J; Lehman, V T; Carr, C M; Amrami, K K; Morris, J M; Thielen, K R; Maus, T P

2016-01-01

To investigate whether there are differences in fluoroscopy time and patient dose for fluoroscopically guided lumbar transforaminal epidural steroid injections (TFESIs) performed by staff radiologists versus with trainees and to evaluate the effect of patient body mass index (BMI) on fluoroscopy time and patient dose, including their interactions with other variables. Single-level lumbar TFESIs (n=1844) between 1 January 2011 and 31 December 2013 were reviewed. Fluoroscopy time, reference point air kerma (Ka,r), and kerma area product (KAP) were recorded. BMI and trainee involvement were examined as predictors of fluoroscopy time, Ka,r, and KAP in models adjusted for age and gender in multivariable linear models. Stratified models of BMI groups by trainee presence were performed. Increased age was the only significant predictor of increased fluoroscopy time (p<0.0001). Ka,r and KAP were significantly higher in patients with a higher BMI (p<0.0001 and p=0.0009). When stratified by BMI, longer fluoroscopy time predicted increased Ka,r and KAP in all groups (p<0.0001). Trainee involvement was not a statistically significant predictor of fluoroscopy time or Ka,r in any BMI category. KAP was lower with trainees in the overweight group (p=0.0009) and higher in male patients for all BMI categories (p<0.02). Trainee involvement did not result in increased fluoroscopy time or patient dose. BMI did not affect fluoroscopy time; however, overweight and obese patients received significantly higher Ka,r and KAP. Male patients received a higher KAP in all BMI categories. Limiting fluoroscopy time and good collimation practices should be reinforced in these patients. Copyright © 2015 The Royal College of Radiologists. Published by Elsevier Ltd. All rights reserved.

Coalescence computations for large samples drawn from populations of time-varying sizes

PubMed Central

Polanski, Andrzej; Szczesna, Agnieszka; Garbulowski, Mateusz; Kimmel, Marek

2017-01-01

We present new results concerning probability distributions of times in the coalescence tree and expected allele frequencies for coalescent with large sample size. The obtained results are based on computational methodologies, which involve combining coalescence time scale changes with techniques of integral transformations and using analytical formulae for infinite products. We show applications of the proposed methodologies for computing probability distributions of times in the coalescence tree and their limits, for evaluation of accuracy of approximate expressions for times in the coalescence tree and expected allele frequencies, and for analysis of large human mitochondrial DNA dataset. PMID:28170404

On-Line Measurement of Heat of Combustion of Gaseous Hydrocarbon Fuel Mixtures

NASA Technical Reports Server (NTRS)

Sprinkle, Danny R.; Chaturvedi, Sushil K.; Kheireddine, Ali

1996-01-01

A method for the on-line measurement of the heat of combustion of gaseous hydrocarbon fuel mixtures has been developed and tested. The method involves combustion of a test gas with a measured quantity of air to achieve a preset concentration of oxygen in the combustion products. This method involves using a controller which maintains the fuel (gas) volumetric flow rate at a level consistent with the desired oxygen concentration in the combustion products. The heat of combustion is determined form a known correlation with the fuel flow rate. An on-line computer accesses the fuel flow data and displays the heat of combustion measurement at desired time intervals. This technique appears to be especially applicable for measuring heats of combustion of hydrocarbon mixtures of unknown composition such as natural gas.

The rate of decay of fresh fission products from a nuclear reactor

NASA Astrophysics Data System (ADS)

Dolan, David J.

Determining the rate of decay of fresh fission products from a nuclear reactor is complex because of the number of isotopes involved, different types of decay, half-lives of the isotopes, and some isotopes decay into other radioactive isotopes. Traditionally, a simplified rule of 7s and 10s is used to determine the dose rate from nuclear weapons and can be to estimate the dose rate from fresh fission products of a nuclear reactor. An experiment was designed to determine the dose rate with respect to time from fresh fission products of a nuclear reactor. The experiment exposed 0.5 grams of unenriched Uranium to a fast and thermal neutron flux from a TRIGA Research Reactor (Lakewood, CO) for ten minutes. The dose rate from the fission products was measured by four Mirion DMC 2000XB electronic personal dosimeters over a period of six days. The resulting dose rate following a rule of 10s: the dose rate of fresh fission products from a nuclear reactor decreases by a factor of 10 for every 10 units of time.

Nitric oxide production by hemocytes of the ascidian Styela plicata.

PubMed

de Barros, Cintia Monteiro; de Carvalho, Danielle Ronald; Andrade, Leonardo R; Pavão, Mauro Sérgio G; Allodi, Silvana

2009-10-01

Ascidian hemolymph contains various types of blood cells (hemocytes), which are believed to be involved in defense mechanisms. We have studied nitric-oxide (NO) synthase activity in hemocytes of the ascidian Styela plicata after exposure to lipopolysaccharide (LPS). To investigate which cell types are involved in NO production, we first identified, by electron microscopy, the types of hemocytes previously described, mainly by light microscopy, by others. Five types of blood cells could be recognized in the hemolymph: granulocytes, hemoblasts, lymphocyte-like cells, morula cells, and pigment cells. The lymphocyte-like cells produced the most NO. In agreement with studies of other invertebrates, nitrite generation did not change after LPS stimulation in assays in vitro, under either different concentrations of LPS or different time periods. Therefore, we performed an in vivo assay by injecting a known quantity of Escherichia coli into the tunic of the ascidians in order to investigate possible differences in NO levels. No increase of NO occurred accompanying the inflammatory reaction suggesting that another molecule in the pathway was involved. We found that nuclear factor kappaB (NFkappaB) was activated. Since NFkappaB is involved in the production of many substances related to immune responses, additional molecules might also be generated in response to E. coli infection. These observations may improve our understanding of the reaction of animals to eutrophic conditions.

Metric integration architecture for product development

NASA Astrophysics Data System (ADS)

Sieger, David B.

1997-06-01

Present-day product development endeavors utilize the concurrent engineering philosophy as a logical means for incorporating a variety of viewpoints into the design of products. Since this approach provides no explicit procedural provisions, it is necessary to establish at least a mental coupling with a known design process model. The central feature of all such models is the management and transformation of information. While these models assist in structuring the design process, characterizing the basic flow of operations that are involved, they provide no guidance facilities. The significance of this feature, and the role it plays in the time required to develop products, is increasing in importance due to the inherent process dynamics, system/component complexities, and competitive forces. The methodology presented in this paper involves the use of a hierarchical system structure, discrete event system specification (DEVS), and multidimensional state variable based metrics. This approach is unique in its capability to quantify designer's actions throughout product development, provide recommendations about subsequent activity selection, and coordinate distributed activities of designers and/or design teams across all design stages. Conceptual design tool implementation results are used to demonstrate the utility of this technique in improving the incremental decision making process.

Hardware Neural Network for a Visual Inspection System

NASA Astrophysics Data System (ADS)

Chun, Seungwoo; Hayakawa, Yoshihiro; Nakajima, Koji

The visual inspection of defects in products is heavily dependent on human experience and instinct. In this situation, it is difficult to reduce the production costs and to shorten the inspection time and hence the total process time. Consequently people involved in this area desire an automatic inspection system. In this paper, we propose a hardware neural network, which is expected to provide high-speed operation for automatic inspection of products. Since neural networks can learn, this is a suitable method for self-adjustment of criteria for classification. To achieve high-speed operation, we use parallel and pipelining techniques. Furthermore, we use a piecewise linear function instead of a conventional activation function in order to save hardware resources. Consequently, our proposed hardware neural network achieved 6GCPS and 2GCUPS, which in our test sample proved to be sufficiently fast.

Deployment Threats to Rapid Deployment Forces

DTIC Science & Technology

1982-12-01

may take two weeks. The same process occurs in people who move rapidly from a time zone in which they are well-adapted to a time zone that is hours...travel is a complex process involving change and transition. Some of these changes are small and apparently insignificant, others loom large in their... process of depart- ing is not innocuous. It must be viewed as a personsal transition that may have a significant potential for stress production

Hydrograph variances over different timescales in hydropower production networks

NASA Astrophysics Data System (ADS)

Zmijewski, Nicholas; Wörman, Anders

2016-08-01

The operation of water reservoirs involves a spectrum of timescales based on the distribution of stream flow travel times between reservoirs, as well as the technical, environmental, and social constraints imposed on the operation. In this research, a hydrodynamically based description of the flow between hydropower stations was implemented to study the relative importance of wave diffusion on the spectrum of hydrograph variance in a regulated watershed. Using spectral decomposition of the effluence hydrograph of a watershed, an exact expression of the variance in the outflow response was derived, as a function of the trends of hydraulic and geomorphologic dispersion and management of production and reservoirs. We show that the power spectra of involved time-series follow nearly fractal patterns, which facilitates examination of the relative importance of wave diffusion and possible changes in production demand on the outflow spectrum. The exact spectral solution can also identify statistical bounds of future demand patterns due to limitations in storage capacity. The impact of the hydraulic description of the stream flow on the reservoir discharge was examined for a given power demand in River Dalälven, Sweden, as function of a stream flow Peclet number. The regulation of hydropower production on the River Dalälven generally increased the short-term variance in the effluence hydrograph, whereas wave diffusion decreased the short-term variance over periods of <1 week, depending on the Peclet number (Pe) of the stream reach. This implies that flow variance becomes more erratic (closer to white noise) as a result of current production objectives.

The YJR127C/ZMS1 gene product is involved in glycerol-based respiratory growth of the yeast Saccharomyces cerevisiae.

PubMed

Lu, Lin; Roberts, George G; Oszust, Cynthia; Hudson, Alan P

2005-10-01

A putative yeast mitochondrial upstream activating sequence (UAS) was used in a one-hybrid screening procedure that identified the YJR127C ORF on chromosome X. This gene was previously designated ZMS1 and is listed as a transcription factor on the SGD website. Real time RT-PCR assays showed that expression of YJR127C/ZMS1 was glucose-repressible, and a deletion mutant for the gene showed a growth defect on glycerol-based but not on glucose- or ethanol-based medium. Real time RT-PCR analyses identified severely attenuated transcript levels from GUT1 and GUT2 to be the source of that growth defect, the products of GUT1 and GUT2 are required for glycerol utilization. mRNA levels from a large group of mitochondria- and respiration-related nuclear genes also were shown to be attenuated in the deletion mutant. Importantly, transcript levels from the mitochondrial OLI1 gene, which has an associated organellar UAS, were attenuated in the DeltaYJR127C mutant during glycerol-based growth, but those from COX3 (OXI2), which lacks an associated mitochondrial UAS, were not. Transcriptome analysis of the glycerol-grown deletion mutant showed that genes in several metabolic and other categories are affected by loss of this gene product, including protein transport, signal transduction, and others. Thus, the product of YJR127C/ZMS1 is involved in transcriptional control for genes in both cellular genetic compartments, many of which specify products required for glycerol-based growth, respiration, and other functions.

The Role of Sustained Attention in the Production of Conjoined Noun Phrases: An Individual Differences Study.

PubMed

Jongman, Suzanne R; Meyer, Antje S; Roelofs, Ardi

2015-01-01

It has previously been shown that language production, performed simultaneously with a nonlinguistic task, involves sustained attention. Sustained attention concerns the ability to maintain alertness over time. Here, we aimed to replicate the previous finding by showing that individuals call upon sustained attention when they plan single noun phrases (e.g., "the carrot") and perform a manual arrow categorization task. In addition, we investigated whether speakers also recruit sustained attention when they produce conjoined noun phrases (e.g., "the carrot and the bucket") describing two pictures, that is, when both the first and second task are linguistic. We found that sustained attention correlated with the proportion of abnormally slow phrase-production responses. Individuals with poor sustained attention displayed a greater number of very slow responses than individuals with better sustained attention. Importantly, this relationship was obtained both for the production of single phrases while performing a nonlinguistic manual task, and the production of noun phrase conjunctions in referring to two spatially separated objects. Inhibition and updating abilities were also measured. These scores did not correlate with our measure of sustained attention, suggesting that sustained attention and executive control are distinct. Overall, the results suggest that planning conjoined noun phrases involves sustained attention, and that language production happens less automatically than has often been assumed.

PCR screening of an African fermented pearl-millet porridge metagenome to investigate the nutritional potential of its microbiota.

PubMed

Saubade, Fabien; Humblot, Christèle; Hemery, Youna M; Guyot, Jean-Pierre

2017-03-06

Cereals are staple foods in most African countries, and many African cereal-based foods are spontaneously fermented. The nutritional quality of cereal products can be enhanced through fermentation, and traditional cereal-based fermented foods (CBFFs) are possible sources of lactic acid bacteria (LAB) with useful nutritional properties. The nutritional properties of LAB vary depending on the species and even on the strain, and the microbial composition of traditional CBFFs varies from one traditional production unit (TPU) to another. The nutritional quality of traditional CBFFs may thus vary depending on their microbial composition. As the isolation of potentially useful LAB from traditional CBFFs can be very time consuming, the aim of this study was to use PCR to assess the nutritional potential of LAB directly on the metagenomes of pearl-millet based fermented porridges (ben-saalga) from Burkina Faso. Genes encoding enzymes involved in different nutritional activities were screened in 50 metagenomes extracted from samples collected in 10 TPUs in Ouagadougou. The variability of the genetic potential was recorded. Certain genes were never detected in the metagenomes (genes involved in carotenoid synthesis) while others were frequently detected (genes involved in folate and riboflavin production, starch hydrolysis, polyphenol degradation). Highly variable microbial composition - assessed by real-time PCR - was observed among samples collected in different TPUs, but also among samples from the same TPU. The high frequency of the presence of genes did not necessarily correlate with in situ measurements of the expected products. Indeed, no significant correlation was found between the microbial variability and the variability of the genetic potential. In spite of the high rate of detection (80%) of both genes folP and folK, encoding enzymes involved in folate synthesis, the folate content in ben-saalga was rather low (median: 0.5μg/100g fresh weight basis). This work highlighted the limit of evaluating the nutritional potential of the microbiota of traditional fermented foods by the only screening of genes in metagenomes, and suggests that such a screening should be completed by a functional analysis. Copyright © 2017 Elsevier B.V. All rights reserved.

Structural brain aging and speech production: a surface-based brain morphometry study.

PubMed

Tremblay, Pascale; Deschamps, Isabelle

2016-07-01

While there has been a growing number of studies examining the neurofunctional correlates of speech production over the past decade, the neurostructural correlates of this immensely important human behaviour remain less well understood, despite the fact that previous studies have established links between brain structure and behaviour, including speech and language. In the present study, we thus examined, for the first time, the relationship between surface-based cortical thickness (CT) and three different behavioural indexes of sublexical speech production: response duration, reaction times and articulatory accuracy, in healthy young and older adults during the production of simple and complex meaningless sequences of syllables (e.g., /pa-pa-pa/ vs. /pa-ta-ka/). The results show that each behavioural speech measure was sensitive to the complexity of the sequences, as indicated by slower reaction times, longer response durations and decreased articulatory accuracy in both groups for the complex sequences. Older adults produced longer speech responses, particularly during the production of complex sequence. Unique age-independent and age-dependent relationships between brain structure and each of these behavioural measures were found in several cortical and subcortical regions known for their involvement in speech production, including the bilateral anterior insula, the left primary motor area, the rostral supramarginal gyrus, the right inferior frontal sulcus, the bilateral putamen and caudate, and in some region less typically associated with speech production, such as the posterior cingulate cortex.

The Stratospheric Water and Ozone Satellite Homogenized (SWOOSH) database: a long-term database for climate studies

NASA Astrophysics Data System (ADS)

Davis, Sean M.; Rosenlof, Karen H.; Hassler, Birgit; Hurst, Dale F.; Read, William G.; Vömel, Holger; Selkirk, Henry; Fujiwara, Masatomo; Damadeo, Robert

2016-09-01

In this paper, we describe the construction of the Stratospheric Water and Ozone Satellite Homogenized (SWOOSH) database, which includes vertically resolved ozone and water vapor data from a subset of the limb profiling satellite instruments operating since the 1980s. The primary SWOOSH products are zonal-mean monthly-mean time series of water vapor and ozone mixing ratio on pressure levels (12 levels per decade from 316 to 1 hPa). The SWOOSH pressure level products are provided on several independent zonal-mean grids (2.5, 5, and 10°), and additional products include two coarse 3-D griddings (30° long × 10° lat, 20° × 5°) as well as a zonal-mean isentropic product. SWOOSH includes both individual satellite source data as well as a merged data product. A key aspect of the merged product is that the source records are homogenized to account for inter-satellite biases and to minimize artificial jumps in the record. We describe the SWOOSH homogenization process, which involves adjusting the satellite data records to a "reference" satellite using coincident observations during time periods of instrument overlap. The reference satellite is chosen based on the best agreement with independent balloon-based sounding measurements, with the goal of producing a long-term data record that is both homogeneous (i.e., with minimal artificial jumps in time) and accurate (i.e., unbiased). This paper details the choice of reference measurements, homogenization, and gridding process involved in the construction of the combined SWOOSH product and also presents the ancillary information stored in SWOOSH that can be used in future studies of water vapor and ozone variability. Furthermore, a discussion of uncertainties in the combined SWOOSH record is presented, and examples of the SWOOSH record are provided to illustrate its use for studies of ozone and water vapor variability on interannual to decadal timescales. The version 2.5 SWOOSH data are publicly available at doi:10.7289/V5TD9VBX.

The transition of a large-scale quality improvement initiative: a bibliometric analysis of the Productive Ward: Releasing Time to Care programme.

PubMed

White, Mark; Wells, John S G; Butterworth, Tony

2014-09-01

To examine the literature related to a large-scale quality improvement initiative, the 'Productive Ward: Releasing Time to Care', providing a bibliometric profile that tracks the level of interest and scale of roll-out and adoption, discussing the implications for sustainability. Productive Ward: Releasing Time to Care (aka Productive Ward) is probably one of the most ambitious quality improvement efforts engaged by the UK-NHS. Politically and financially supported, its main driver was the NHS Institute for Innovation and Improvement. The NHS institute closed in early 2013 leaving a void of resources, knowledge and expertise. UK roll-out of the initiative is well established and has arguably peaked. International interest in the initiative however continues to develop. A comprehensive literature review was undertaken to identify the literature related to the Productive Ward and its implementation (January 2006-June 2013). A bibliometric analysis examined/reviewed the trends and identified/measured interest, spread and uptake. Overall distribution patterns identify a declining trend of interest, with reduced numbers of grey literature and evaluation publications. However, detailed examination of the data shows no reduction in peer-reviewed outputs. There is some evidence that international uptake of the initiative continues to generate publications and create interest. Sustaining this initiative in the UK will require re-energising, a new focus and financing. The transition period created by the closure of its creator may well contribute to further reduced levels of interest and publication outputs in the UK. However, international implementation, evaluation and associated publications could serve to attract professional/academic interest in this well-established, positively reported, quality improvement initiative. This paper provides nurses and ward teams involved in quality improvement programmes with a detailed, current-state, examination and analysis of the Productive Ward literature, highlighting the bibliometric patterns of this large-scale, international, quality improvement programme. It serves to disseminate updated publication information to those in clinical practice who are involved in Productive Ward or a similar quality improvement initiative. © 2014 John Wiley & Sons Ltd.

The Stratospheric Water and Ozone Satellite Homogenized (SWOOSH) database: a long-term database for climate studies

PubMed Central

Davis, Sean M.; Rosenlof, Karen H.; Hassler, Birgit; Hurst, Dale F.; Read, William G.; Vömel, Holger; Selkirk, Henry; Fujiwara, Masatomo; Damadeo, Robert

2017-01-01

In this paper, we describe the construction of the Stratospheric Water and Ozone Satellite Homogenized (SWOOSH) database, which includes vertically resolved ozone and water vapor data from a subset of the limb profiling satellite instruments operating since the 1980s. The primary SWOOSH products are zonal-mean monthly-mean time series of water vapor and ozone mixing ratio on pressure levels (12 levels per decade from 316 to 1 hPa). The SWOOSH pressure level products are provided on several independent zonal-mean grids (2.5, 5, and 10°), and additional products include two coarse 3-D griddings (30° long × 10° lat, 20° × 5°) as well as a zonal-mean isentropic product. SWOOSH includes both individual satellite source data as well as a merged data product. A key aspect of the merged product is that the source records are homogenized to account for inter-satellite biases and to minimize artificial jumps in the record. We describe the SWOOSH homogenization process, which involves adjusting the satellite data records to a “reference” satellite using coincident observations during time periods of instrument overlap. The reference satellite is chosen based on the best agreement with independent balloon-based sounding measurements, with the goal of producing a long-term data record that is both homogeneous (i.e., with minimal artificial jumps in time) and accurate (i.e., unbiased). This paper details the choice of reference measurements, homogenization, and gridding process involved in the construction of the combined SWOOSH product and also presents the ancillary information stored in SWOOSH that can be used in future studies of water vapor and ozone variability. Furthermore, a discussion of uncertainties in the combined SWOOSH record is presented, and examples of the SWOOSH record are provided to illustrate its use for studies of ozone and water vapor variability on interannual to decadal timescales. The version 2.5 SWOOSH data are publicly available at doi:10.7289/V5TD9VBX. PMID:28966693

The Stratospheric Water and Ozone Satellite Homogenized (SWOOSH) database: a long-term database for climate studies.

PubMed

Davis, Sean M; Rosenlof, Karen H; Hassler, Birgit; Hurst, Dale F; Read, William G; Vömel, Holger; Selkirk, Henry; Fujiwara, Masatomo; Damadeo, Robert

2016-01-01

In this paper, we describe the construction of the Stratospheric Water and Ozone Satellite Homogenized (SWOOSH) database, which includes vertically resolved ozone and water vapor data from a subset of the limb profiling satellite instruments operating since the 1980s. The primary SWOOSH products are zonal-mean monthly-mean time series of water vapor and ozone mixing ratio on pressure levels (12 levels per decade from 316 to 1 hPa). The SWOOSH pressure level products are provided on several independent zonal-mean grids (2.5, 5, and 10°), and additional products include two coarse 3-D griddings (30° long × 10° lat, 20° × 5°) as well as a zonal-mean isentropic product. SWOOSH includes both individual satellite source data as well as a merged data product. A key aspect of the merged product is that the source records are homogenized to account for inter-satellite biases and to minimize artificial jumps in the record. We describe the SWOOSH homogenization process, which involves adjusting the satellite data records to a "reference" satellite using coincident observations during time periods of instrument overlap. The reference satellite is chosen based on the best agreement with independent balloon-based sounding measurements, with the goal of producing a long-term data record that is both homogeneous (i.e., with minimal artificial jumps in time) and accurate (i.e., unbiased). This paper details the choice of reference measurements, homogenization, and gridding process involved in the construction of the combined SWOOSH product and also presents the ancillary information stored in SWOOSH that can be used in future studies of water vapor and ozone variability. Furthermore, a discussion of uncertainties in the combined SWOOSH record is presented, and examples of the SWOOSH record are provided to illustrate its use for studies of ozone and water vapor variability on interannual to decadal timescales. The version 2.5 SWOOSH data are publicly available at doi:10.7289/V5TD9VBX.

Examining Focused L2 Practice: From in Vitro to in Vivo

ERIC Educational Resources Information Center

Cornillie, Frederik; Van Den Noortgate, Wim; Van den Branden, Kris; Desmet, Piet

2017-01-01

Behaviour-tracking technology has been used for decades in SLA research on focused practice with an eye toward elucidating the nature of L2 automatization (e.g. DeKeyser, 1997; Robinson, 1997). This involves longitudinally capturing learners' judgments or linguistic production along with their response times in order to investigate how specific…

Technology, Talk, and Time: Patterns of Group Communication and Identity

ERIC Educational Resources Information Center

Dahl, Laura Brown

2015-01-01

The effective use of technology is increasingly important in many fields where online and digital communication, collaboration, and production have become more prevalent. Although it is clear that many higher education students come into the classroom with skills involved with consuming technology, they often are much less capable of producing…

The Acquisition of Gender Labels in Infancy: Implications for Gender-Typed Play

ERIC Educational Resources Information Center

Zosuls, Kristina M.; Ruble, Diane N.; Tamis-LeMonda, Catherine S.; Shrout, Patrick E.; Bornstein, Marc H.; Greulich, Faith K.

2009-01-01

Two aspects of children's early gender development--the spontaneous production of gender labels and gender-typed play--were examined longitudinally in a sample of 82 children. Survival analysis, a statistical technique well suited to questions involving developmental transitions, was used to investigate the timing of the onset of children's gender…

Sowing the Seeds of Transformation: The United States Military Between the Civil War and World War One

DTIC Science & Technology

2001-11-02

efficiencies of production brought into being by the Industrial Revolution . For the first time, the entire populations of each combatant were involved...killing had been enabled by three “revolutions:” the economic strength of the post- industrial revolution , its ability to mobilize society and excess

Copper Metal from Malachite Circa 4000 B.C.E.

ERIC Educational Resources Information Center

Yee, Gordon T.; Eddleton, Jeannine E.; Johnson, Cris E.

2004-01-01

The feasibility of the laboratory production of copper metal from a readily available, naturally occurring mineral malachite utilizing techniques that are consistent with the time period of around 4000 B.C.E. is presented. The starting materials are inexpensive and convenient and the procedure involves no hazardous reagents and produces no…

Teacher Scaffolding of Oral Language Production

ERIC Educational Resources Information Center

George, May G.

2011-01-01

This research involved two observational studies. It explored the scaffolding processes as part of classroom pedagogy. The research shed light on the way a teacher's instructional methodology took shape in the classroom. The target event for this study was the time in which a novice learner was engaged publicly in uttering a sentence in Arabic in…

46 CFR 201.109 - Discovery and production of documents.

Code of Federal Regulations, 2011 CFR

2011-10-01

... relevant to the subject matter involved in the pending proceeding, and which are in his possession, custody or control. The order shall specify the time, place, and manner of making the inspection and taking the copies and photographs and may prescribe such terms and conditions as are just. In lieu of such...

Fifth Graders' Creativity in Inventions with and without Creative Articulation Instruction

ERIC Educational Resources Information Center

Kress, Darcie K.; Rule, Audrey C.

2017-01-01

Industry and authors of 21st Century Skill Frameworks are calling for student proficiency in creativity, problem-solving, innovation, collaboration, and communication skills. This project involved 13 fifth grade gifted students in inventing products for a specified audience with a set of given materials, time limit, and topic constraints. The…

49 CFR 1313.7 - Contract summary for grain products-involving a port.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 9 2010-10-01 2010-10-01 false Contract summary for grain products-involving a... RAILROAD CONTRACTS FOR THE TRANSPORTATION OF AGRICULTURAL PRODUCTS § 1313.7 Contract summary for grain... grain products that involves service to or from a port must contain the following information: (1...

49 CFR 1313.8 - Contract summary for grain products-not involving a port.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 9 2010-10-01 2010-10-01 false Contract summary for grain products-not involving... RAILROAD CONTRACTS FOR THE TRANSPORTATION OF AGRICULTURAL PRODUCTS § 1313.8 Contract summary for grain... grain products that does not involve service to or from a port must contain the information specified in...

A novel pathway of direct methane production and emission by eukaryotes including plants, animals and fungi: An overview

NASA Astrophysics Data System (ADS)

Liu, Jiangong; Chen, Huai; Zhu, Qiuan; Shen, Yan; Wang, Xue; Wang, Meng; Peng, Changhui

2015-08-01

Methane (CH4) is a powerful greenhouse gas with a global warming potential 28 times that of carbon dioxide (CO2). CH4 is responsible for approximately 20% of the Earth's warming since pre-industrial times. Knowledge of the sources of CH4 is crucial due to the recent substantial interannual variability of growth rates and uncertainties regarding individual sources. The prevailing paradigm is that methanogenesis carried out by methanogenic archaea occurs primarily under strictly anaerobic conditions. However, in the past decade, studies have confirmed direct CH4 release from three important kingdoms of eukaryotes-Plantae, Animalia and Fungi-even in the presence of oxygen. This novel CH4 production pathway has been aptly termed ;aerobic CH4 production; to distinguish it from the well-known anaerobic CH4 production pathway, which involves catalytic activity by methanogenic archaeal enzymes. In this review, we collated recent experimental evidence from the published literature and documented this novel pathway of direct CH4 production and emission by eukaryotes. The mechanisms involved in this pathway may be related to protective strategies of eukaryotes in response to changing environmental stresses, with CH4 a by-product or end-product during or at the end of the process(es) that originates from organic methyl-type compounds. Based on the existing, albeit uncertain estimates, plants seem to contribute less to the global CH4 budget (3-24%) compared to previous estimates (10-37%). We still lack estimates of CH4 emissions by animals and fungi. Overall, there is an urgent need to identify the precursors for this novel CH4 source and improve our understanding of the mechanisms of direct CH4 production and the impacts of environmental stresses. An estimate of this new CH4 source, which was not considered as a CH4 source by the Intergovernmental Panel on Climate Change (IPCC) (2013), could be useful for better quantitation of the global CH4 budget.

A survey of the reformulation of Australian child-oriented food products.

PubMed

Savio, Stephanie; Mehta, Kaye; Udell, Tuesday; Coveney, John

2013-09-11

Childhood obesity is one of the most pressing public health challenges of the 21st century. Reformulating commonly eaten food products is a key emerging strategy to improve the food supply and help address rising rates of obesity and chronic disease. This study aimed to monitor reformulation of Australian child-oriented food products (products marketed specifically to children) from 2009-2011. In 2009, all child-oriented food products in a large supermarket in metropolitan Adelaide were identified. These baseline products were followed up in 2011 to identify products still available for sale. Nutrient content data were collected from Nutrient Information Panels in 2009 and 2011. Absolute and percentage change in nutrient content were calculated for energy, total fat, saturated fat, sugars, sodium and fibre. Data were descriptively analysed to examine reformulation in individual products, in key nutrients, within product categories and across all products. Two methods were used to assess the extent of reformulation; the first involved assessing percentage change in single nutrients over time, while the second involved a set of nutrient criteria to assess changes in overall healthiness of products over time. Of 120 products, 40 remained unchanged in nutrient composition from 2009-2011 and 80 underwent change. The proportions of positively and negatively reformulated products were similar for most nutrients surveyed, with the exception of sodium. Eighteen products (15%) were simultaneously positively and negatively reformulated for different nutrients. Using percentage change in nutrient content to assess extent of reformulation, nearly half (n = 53) of all products were at least moderately reformulated and just over one third (n = 42) were substantially reformulated. The nutrient criteria method revealed 5 products (6%) that were positively reformulated and none that had undergone negative reformulation. Positive and negative reformulation was observed to a similar extent within the sample indicating little overall improvement in healthiness of the child-oriented food supply from 2009-2011. In the absence of agreed reformulation standards, the extent of reformulation was assessed against criteria developed specifically for this project. While arbitrary in nature, these criteria were based on reasonable assessment of the meaningfulness of reformulation and change in nutrient composition. As well as highlighting nutrient composition changes in a number of food products directed to children, this study emphasises the need to develop comprehensive, targeted and standardised reformulation benchmarks to assess the extent of reformulation occurring in the food supply.

Culture-Independent Analysis of Probiotic Products by Denaturing Gradient Gel Electrophoresis

PubMed Central

Temmerman, R.; Scheirlinck, I.; Huys, G.; Swings, J.

2003-01-01

In order to obtain functional and safe probiotic products for human consumption, fast and reliable quality control of these products is crucial. Currently, analysis of most probiotics is still based on culture-dependent methods involving the use of specific isolation media and identification of a limited number of isolates, which makes this approach relatively insensitive, laborious, and time-consuming. In this study, a collection of 10 probiotic products, including four dairy products, one fruit drink, and five freeze-dried products, were subjected to microbial analysis by using a culture-independent approach, and the results were compared with the results of a conventional culture-dependent analysis. The culture-independent approach involved extraction of total bacterial DNA directly from the product, PCR amplification of the V3 region of the 16S ribosomal DNA, and separation of the amplicons on a denaturing gradient gel. Digital capturing and processing of denaturing gradient gel electrophoresis (DGGE) band patterns allowed direct identification of the amplicons at the species level. This whole culture-independent approach can be performed in less than 30 h. Compared with culture-dependent analysis, the DGGE approach was found to have a much higher sensitivity for detection of microbial strains in probiotic products in a fast, reliable, and reproducible manner. Unfortunately, as reported in previous studies in which the culture-dependent approach was used, a rather high percentage of probiotic products suffered from incorrect labeling and yielded low bacterial counts, which may decrease their probiotic potential. PMID:12513998

Enriching the biological space of natural products and charting drug metabolites, through real time biotransformation monitoring: The NMR tube bioreactor.

PubMed

Chatzikonstantinou, Alexandra V; Chatziathanasiadou, Maria V; Ravera, Enrico; Fragai, Marco; Parigi, Giacomo; Gerothanassis, Ioannis P; Luchinat, Claudio; Stamatis, Haralambos; Tzakos, Andreas G

2018-01-01

Natural products offer a wide range of biological activities, but they are not easily integrated in the drug discovery pipeline, because of their inherent scaffold intricacy and the associated complexity in their synthetic chemistry. Enzymes may be used to perform regioselective and stereoselective incorporation of functional groups in the natural product core, avoiding harsh reaction conditions, several protection/deprotection and purification steps. Herein, we developed a three step protocol carried out inside an NMR-tube. 1st-step: STD-NMR was used to predict the: i) capacity of natural products as enzyme substrates and ii) possible regioselectivity of the biotransformations. 2nd-step: The real-time formation of multiple-biotransformation products in the NMR-tube bioreactor was monitored in-situ. 3rd-step: STD-NMR was applied in the mixture of the biotransformed products to screen ligands for protein targets. Herein, we developed a simple and time-effective process, the "NMR-tube bioreactor", that is able to: (i) predict which component of a mixture of natural products can be enzymatically transformed, (ii) monitor in situ the transformation efficacy and regioselectivity in crude extracts and multiple substrate biotransformations without fractionation and (iii) simultaneously screen for interactions of the biotransformation products with pharmaceutical protein targets. We have developed a green, time-, and cost-effective process that provide a simple route from natural products to lead compounds for drug discovery. This process can speed up the most crucial steps in the early drug discovery process, and reduce the chemical manipulations usually involved in the pipeline, improving the environmental compatibility. Copyright © 2017 Elsevier B.V. All rights reserved.

A pediatric residency research requirement to improve collaborative resident and faculty publication productivity.

PubMed

Kurahara, David K; Kogachi, Kaitlin; Yamane, Maya; Ly, Catherine L; Foster, Jennifer H; Masaki-Tesoro, Traci; Murai, Daniel; Rudoy, Raul

2012-08-01

Involvement in a research project can teach training physicians about the scientific process involved in medicine. For this reason, the University of Hawai'i pediatrics department developed a Residency Research Requirement and Program (RRRP) in 2001. We studied a 14-year time period before and after the RRRP was initiated, and found a greater then ten-fold increase in resident publications and faculty involvement in these projects. Many of these manuscripts were the result of resident collaboration and this also increased significantly. The residents who later went into fellowship training were found to be more likely to publish their work. An RRRP encourages residents and faculty to become involved in research publications and other scholarly activities. Its development may help to motivate training physicians to learn important research skills.

Verification and Validation of NASA-Supported Enhancements to the Near Real Time Harmful Algal Blooms Observing System (HABSOS)

NASA Technical Reports Server (NTRS)

Spruce, Joseph P.; Hall, Calllie; McPherson, Terry; Spiering, Bruce; Brown, Richard; Estep, Lee; Lunde, Bruce; Guest, DeNeice; Navard, Andy; Pagnutti, Mary;

High-throughput process development: I. Process chromatography.

PubMed

Rathore, Anurag S; Bhambure, Rahul

2014-01-01

Chromatographic separation serves as "a workhorse" for downstream process development and plays a key role in removal of product-related, host cell-related, and process-related impurities. Complex and poorly characterized raw materials and feed material, low feed concentration, product instability, and poor mechanistic understanding of the processes are some of the critical challenges that are faced during development of a chromatographic step. Traditional process development is performed as trial-and-error-based evaluation and often leads to a suboptimal process. High-throughput process development (HTPD) platform involves an integration of miniaturization, automation, and parallelization and provides a systematic approach for time- and resource-efficient chromatography process development. Creation of such platforms requires integration of mechanistic knowledge of the process with various statistical tools for data analysis. The relevance of such a platform is high in view of the constraints with respect to time and resources that the biopharma industry faces today. This protocol describes the steps involved in performing HTPD of process chromatography step. It described operation of a commercially available device (PreDictor™ plates from GE Healthcare). This device is available in 96-well format with 2 or 6 μL well size. We also discuss the challenges that one faces when performing such experiments as well as possible solutions to alleviate them. Besides describing the operation of the device, the protocol also presents an approach for statistical analysis of the data that is gathered from such a platform. A case study involving use of the protocol for examining ion-exchange chromatography of granulocyte colony-stimulating factor (GCSF), a therapeutic product, is briefly discussed. This is intended to demonstrate the usefulness of this protocol in generating data that is representative of the data obtained at the traditional lab scale. The agreement in the data is indeed very significant (regression coefficient 0.93). We think that this protocol will be of significant value to those involved in performing high-throughput process development of process chromatography.

Energetic Metastable Oxygen and Nitrogen Atoms in the Terrestrial Atmosphere

NASA Technical Reports Server (NTRS)

Kharchenko, Vasili

2004-01-01

We have investigated the impact of hot metastable oxygen atoms on the product yields and rate coefficients of atmospheric reactions involving O( (sup 1)D). The contribution of the metastable oxygen atoms to the thermal balance of the terrestrial atmosphere between 50 and 200 km has been determined. We found that the presence of hot O((sup l)D) atoms in the mesosphere and lower thermosphere significantly increases the production rate of the rotationally-vibrationally excited NO molecules. The computed yield of the NO molecules in N2O+ O((sup 1)D) atmospheric collisions, involving non-Maxwellian distributions of the metastable oxygen atoms, is more than two times larger than the NO-yield at a thermal equilibrium. The calculated non-equilibrium rate and yield functions are important for ozone and nitrous oxide modeling in the stratosphere, mesosphere and lower thermosphere.

Classification of product inspection items using nonlinear features

NASA Astrophysics Data System (ADS)

Talukder, Ashit; Casasent, David P.; Lee, H.-W.

1998-03-01

Automated processing and classification of real-time x-ray images of randomly oriented touching pistachio nuts is discussed. The ultimate objective is the development of a system for automated non-invasive detection of defective product items on a conveyor belt. This approach involves two main steps: preprocessing and classification. Preprocessing locates individual items and segments ones that touch using a modified watershed algorithm. The second stage involves extraction of features that allow discrimination between damaged and clean items (pistachio nuts). This feature extraction and classification stage is the new aspect of this paper. We use a new nonlinear feature extraction scheme called the maximum representation and discriminating feature (MRDF) extraction method to compute nonlinear features that are used as inputs to a classifier. The MRDF is shown to provide better classification and a better ROC (receiver operating characteristic) curve than other methods.

UV/chlorine treatment of carbamazepine: Transformation products and their formation kinetics.

PubMed

Pan, Yanheng; Cheng, ShuangShuang; Yang, Xin; Ren, Jingyue; Fang, Jingyun; Shang, Chii; Song, Weihua; Lian, Lushi; Zhang, Xinran

2017-06-01

Carbamazepine (CBZ) is one of the pharmaceuticals most frequently detected in the aqueous environment. This study investigated the transformation products when CBZ is degraded by chlorine under ultraviolet (UV) irradiation (the UV/chlorine process). Detailed pathways for the degradation of CBZ were elucidated using ultra-high performance liquid chromatography (UHPLC)-quadrupole time-of-flight mass spectrometry (QTOF-MS). CBZ is readily degraded by hydroxyl radicals (HO) and chlorine radicals (Cl) in the UV/chlorine process, and 24 transformation products were identified. The products indicate that the 10,11-double bond and aromatic ring in CBZ are the sites most susceptible to attack by HO and Cl. Subsequent reaction produces hydroxylated and chlorinated aromatic ring products. Four specific products were quantified and their evolution was related with the chlorine dose, pH, and natural organic matter concentration. Their yields showed an increase followed by a decreasing trend with prolonged reaction time. CBZ-10,11-epoxide (I), the main quantified transformation product from HO oxidation, was observed with a peak transformation yield of 3-32% depending on the conditions. The more toxic acridine (IV) was formed involving both HO and Cl with peak transformation yields of 0.4-1%. All four quantified products together amounted to a peak transformation yield of 34.5%. The potential toxicity of the transformation products was assayed by evaluating their inhibition of the bioluminescence of the bacterium Vibrio Fischeri. The inhibition increased at first and the decreased at longer reaction times, which was in parallel with the evolution of transformation products. Copyright © 2017 Elsevier Ltd. All rights reserved.

Arrests for child pornography production: data at two time points from a national sample of U.S. law enforcement agencies.

PubMed

Wolak, Janis; Finkelhor, David; Mitchell, Kimberly J; Jones, Lisa M

2011-08-01

This study collected information on arrests for child pornography (CP) production at two points (2000-2001 and 2006) from a national sample of more than 2,500 law enforcement agencies. In addition to providing descriptive data about an understudied crime, the authors examined whether trends in arrests suggested increasing CP production, shifts in victim populations, and challenges to law enforcement. Arrests for CP production more than doubled from an estimated 402 in 2000-2001 to an estimated 859 in 2006. Findings suggest the increase was related to increased law enforcement activity rather than to growth in the population of CP producers. Adolescent victims increased, but there was no increase in the proportion of arrest cases involving very young victims or violent images. Producers distributed images in 23% of arrest cases, a proportion that did not change over time. This suggests that much CP production may be primarily for private use. Proactive law enforcement operations increased, as did other features consistent with a robust law enforcement response.

The Henry Ford Production System: LEAN Process Redesign Improves Service in the Molecular Diagnostic Laboratory

PubMed Central

Cankovic, Milena; Varney, Ruan C.; Whiteley, Lisa; Brown, Ron; D'Angelo, Rita; Chitale, Dhananjay; Zarbo, Richard J.

2009-01-01

Accurate and timely molecular test results play an important role in patient management; consequently, there is a customer expectation of short testing turnaround times. Baseline data analysis revealed that the greatest challenge to timely result generation occurred in the preanalytic phase of specimen collection and transport. Here, we describe our efforts to improve molecular testing turnaround times by focusing primarily on redesign of preanalytic processes using the principles of LEAN production. Our goal was to complete greater than 90% of the molecular tests in less than 3 days. The project required cooperation from different laboratory disciplines as well as individuals outside of the laboratory. The redesigned processes involved defining and standardizing the protocols and approaching blood and tissue specimens as analytes for molecular testing. The LEAN process resulted in fewer steps, approaching the ideal of a one-piece flow for specimens through collection/retrieval, transport, and different aspects of the testing process. The outcome of introducing the LEAN process has been a 44% reduction in molecular test turnaround time for tissue specimens, from an average of 2.7 to 1.5 days. In addition, extending LEAN work principles to the clinician suppliers has resulted in a markedly increased number of properly collected and shipped blood specimens (from 50 to 87%). These continuous quality improvements were accomplished by empowered workers in a blame-free environment and are now being sustained with minimal management involvement. PMID:19661386

Functional localization of a "Time Keeper" function separate from attentional resources and task strategy.

PubMed

Tracy, J I; Faro, S H; Mohamed, F B; Pinsk, M; Pinus, A

2000-03-01

The functional neuroanatomy of time estimation has not been well-documented. This research investigated the fMRI measured brain response to an explicit, prospective time interval production (TIP) task. The study tested for the presence of brain activity reflecting a primary time keeper function, distinct from the brain systems involved either in conscious strategies to monitor time or attentional resource and other cognitive processes to accomplish the task. In the TIP task participants were given a time interval and asked to indicate when it elapsed. Two control tasks (counting forwards, backwards) were administered, in addition to a dual task format of the TIP task. Whole brain images were collected at 1.5 Tesla. Analyses (n = 6) yielded a statistical parametric map (SPM ¿z¿) reflecting time keeping and not strategy (counting, number manipulation) or attention resource utilization. Additional SPM ¿z¿s involving activation associated with the accuracy and magnitude the of time estimation response are presented. Results revealed lateral cerebellar and inferior temporal lobe activation were associated with primary time keeping. Behavioral data provided evidence that the procedures for the explicit time judgements did not occur automatically and utilized controlled processes. Activation sites associated with accuracy, magnitude, and the dual task provided indications of the other structures involved in time estimation that implemented task components related to controlled processing. The data are consistent with prior proposals that the cerebellum is a repository of codes for time processing, but also implicate temporal lobe structures for this type of time estimation task. Copyright 2000 Academic Press.

Troubleshooting Costs

NASA Astrophysics Data System (ADS)

Kornacki, Jeffrey L.

Seventy-six million cases of foodborne disease occur each year in the United States alone. Medical and lost productivity costs of the most common pathogens are estimated to be 5.6-9.4 billion. Product recalls, whether from foodborne illness or spoilage, result in added costs to manufacturers in a variety of ways. These may include expenses associated with lawsuits from real or allegedly stricken individuals and lawsuits from shorted customers. Other costs include those associated with efforts involved in finding the source of the contamination and eliminating it and include time when lines are shut down and therefore non-productive, additional non-routine testing, consultant fees, time and personnel required to overhaul the entire food safety system, lost market share to competitors, and the cost associated with redesign of the factory and redesign or acquisition of more hygienic equipment. The cost associated with an effective quality assurance plan is well worth the effort to prevent the situations described.

Hawaii Poison Center data reveals a need for increasing hazard awareness about household products.

PubMed

Menon, P; Kodama, A M

1998-04-01

This study examined for the fiscal years 1995-1996 and 1996-1997, the frequency of calls to Hawaii Poison Center related to household products and pesticides poisoning, the frequency of the source of calls (professional versus layperson), and the patient's age distribution. The data was compared with the data recorded in 1989 which was reported earlier in the literature. We found the most frequent calls were from general public (6 to 8 times) and were related to household products (30% in 1996-97, 39% in 1995-96, and 39% in 1989) involving children less than 5 years of age. Results strongly suggest the need for increasing the awareness of hazards related to household products amongst the general public.

Paths towards Family-friendly Working Time Arrangements: Comparing Workplaces in Different Countries and Industries.

PubMed

Wiß, Tobias

2017-12-01

Although studies have examined the distribution and conditions of employer-provided work-family arrangements, we still lack a systematic investigation of how these vary for different countries and industries. Based on the European Working Conditions Survey 2010, this study examines the conditions under which firms provide family-friendly working time arrangements and what the differences are across four countries (Austria, Denmark, Italy and the UK) and four industries. The impact of employee representatives, employee involvement, manager support and female managers varies across countries and industries because of the institutional environment (prevailing family model, industrial relations) and workforce composition (gender). The impact of employee representatives depends on their co-determination rights, and the direction of their effect on the prevailing family model (e.g. negative in conservative countries such as Austria) and the gender composition of the workforce (negative in male-dominated production, but positive in services). Employee involvement in the work organization is significantly positive in Austria and Denmark (both with co-operative industrial relations), while manager support has the strongest effect in the UK (liberal regime). At the industry level, female supervisors are positively associated with family-friendly working time arrangements only in the male-dominated production industry. These findings suggest that the effects of agency variables and their direction vary depending on the institutional context.

Tunneling effects in the unimolecular decay of (CH 3) 2COO Criegee intermediates to OH radical products

DOE PAGES

Fang, Yi; Barber, Victoria P.; Klippenstein, Stephen J.; ...

2017-04-04

Unimolecular decay of the dimethyl substituted Criegee intermediate (CH 3) 2COO is observed at energies significantly below the transition state barrier associated with hydrogen atom transfer with time-resolved detection of the resultant OH radical products. (CH 3) 2COO is prepared at specific energies in the 3900-4600 cm -1 region through IR excitation of combination bands involving CH stretch and another lower frequency mode, and the OH products are detected by UV laser-induced fluorescence. OH appearance times on the order of microseconds are observed in this deep tunneling regime, which are about 100 times slower than that in the vicinity ofmore » the barrier. The experimental rates are in good accord with Rice-Ramsperger-Kassel-Marcus (RRKM) calculations of the microcanonical dissociation rates for (CH 3) 2COO that include tunneling. Master equation modeling based on these microcanonical rates is used to predict the thermal decay rate of (CH 3) 2COO to OH products under atmospheric conditions of 276 s -1 at 298 K (high pressure limit). Furthermore, thermal unimolecular decay of (CH 3) 2COO to OH products is shown to have significant contributions from tunneling at energies much below the barrier to H-atom transfer.« less

Tunneling effects in the unimolecular decay of (CH 3) 2COO Criegee intermediates to OH radical products

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fang, Yi; Barber, Victoria P.; Klippenstein, Stephen J.

Unimolecular decay of the dimethyl substituted Criegee intermediate (CH 3) 2COO is observed at energies significantly below the transition state barrier associated with hydrogen atom transfer with time-resolved detection of the resultant OH radical products. (CH 3) 2COO is prepared at specific energies in the 3900-4600 cm -1 region through IR excitation of combination bands involving CH stretch and another lower frequency mode, and the OH products are detected by UV laser-induced fluorescence. OH appearance times on the order of microseconds are observed in this deep tunneling regime, which are about 100 times slower than that in the vicinity ofmore » the barrier. The experimental rates are in good accord with Rice-Ramsperger-Kassel-Marcus (RRKM) calculations of the microcanonical dissociation rates for (CH 3) 2COO that include tunneling. Master equation modeling based on these microcanonical rates is used to predict the thermal decay rate of (CH 3) 2COO to OH products under atmospheric conditions of 276 s -1 at 298 K (high pressure limit). Furthermore, thermal unimolecular decay of (CH 3) 2COO to OH products is shown to have significant contributions from tunneling at energies much below the barrier to H-atom transfer.« less

Efficient block preconditioned eigensolvers for linear response time-dependent density functional theory

NASA Astrophysics Data System (ADS)

Vecharynski, Eugene; Brabec, Jiri; Shao, Meiyue; Govind, Niranjan; Yang, Chao

2017-12-01

We present two efficient iterative algorithms for solving the linear response eigenvalue problem arising from the time dependent density functional theory. Although the matrix to be diagonalized is nonsymmetric, it has a special structure that can be exploited to save both memory and floating point operations. In particular, the nonsymmetric eigenvalue problem can be transformed into an eigenvalue problem that involves the product of two matrices M and K. We show that, because MK is self-adjoint with respect to the inner product induced by the matrix K, this product eigenvalue problem can be solved efficiently by a modified Davidson algorithm and a modified locally optimal block preconditioned conjugate gradient (LOBPCG) algorithm that make use of the K-inner product. The solution of the product eigenvalue problem yields one component of the eigenvector associated with the original eigenvalue problem. We show that the other component of the eigenvector can be easily recovered in an inexpensive postprocessing procedure. As a result, the algorithms we present here become more efficient than existing methods that try to approximate both components of the eigenvectors simultaneously. In particular, our numerical experiments demonstrate that the new algorithms presented here consistently outperform the existing state-of-the-art Davidson type solvers by a factor of two in both solution time and storage.

Modality effects in Second Life: the mediating role of social presence and the moderating role of product involvement.

PubMed

Jin, Seung-A Annie

2009-12-01

The rapid growth of virtual worlds is one of the most recent Internet trends. Some distinguishing features of virtual environments include the employment of avatars and multimodal communication among avatars. This study examined the effects of the modality (text vs. audio) of message presentation on people's evaluation of spokes-avatar credibility and the informational value of promotional messages in avatar-based advertising inside 3D virtual environments. An experiment was conducted in the virtual Apple retail store inside Second Life, the most popular and fastest growing virtual world. The author designed a two-group (textual advertisement vs. auditory advertisement) comparison experiment by manipulating the modality of conveying advertisement messages. The author also created a spokes-avatar that represents a real-life organization (Apple) and presents promotional messages about its innovative product, the iPhone. Data analyses showed that (a) textual modality (vs. auditory modality) resulted in greater source expertise, informational value of the advertisement message, and social presence; and that (b) high product involvement (vs. low product involvement) resulted in a more positive attitude toward the product, higher buying intention, and a higher level of perceived interactivity. In addition to the main effects of product involvement and modality, results showed significant interaction between involvement and modality. Modality effects were stronger for people with low product involvement than for those with high product involvement, thus confirming the moderating effects of product involvement. Results of a path analysis also showed that social presence mediated the effects of modality on the perceived informational value of the advertisement message.

Music and Sound in Time Processing of Children with ADHD

PubMed Central

Carrer, Luiz Rogério Jorgensen

2015-01-01

ADHD involves cognitive and behavioral aspects with impairments in many environments of children and their families’ lives. Music, with its playful, spontaneous, affective, motivational, temporal, and rhythmic dimensions can be of great help for studying the aspects of time processing in ADHD. In this article, we studied time processing with simple sounds and music in children with ADHD with the hypothesis that children with ADHD have a different performance when compared with children with normal development in tasks of time estimation and production. The main objective was to develop sound and musical tasks to evaluate and correlate the performance of children with ADHD, with and without methylphenidate, compared to a control group with typical development. The study involved 36 participants of age 6–14 years, recruited at NANI-UNIFESP/SP, subdivided into three groups with 12 children in each. Data was collected through a musical keyboard using Logic Audio Software 9.0 on the computer that recorded the participant’s performance in the tasks. Tasks were divided into sections: spontaneous time production, time estimation with simple sounds, and time estimation with music. Results: (1) performance of ADHD groups in temporal estimation of simple sounds in short time intervals (30 ms) were statistically lower than that of control group (p < 0.05); (2) in the task comparing musical excerpts of the same duration (7 s), ADHD groups considered the tracks longer when the musical notes had longer durations, while in the control group, the duration was related to the density of musical notes in the track. The positive average performance observed in the three groups in most tasks perhaps indicates the possibility that music can, in some way, positively modulate the symptoms of inattention in ADHD. PMID:26441688

Music and Sound in Time Processing of Children with ADHD.

PubMed

Carrer, Luiz Rogério Jorgensen

2015-01-01

ADHD involves cognitive and behavioral aspects with impairments in many environments of children and their families' lives. Music, with its playful, spontaneous, affective, motivational, temporal, and rhythmic dimensions can be of great help for studying the aspects of time processing in ADHD. In this article, we studied time processing with simple sounds and music in children with ADHD with the hypothesis that children with ADHD have a different performance when compared with children with normal development in tasks of time estimation and production. The main objective was to develop sound and musical tasks to evaluate and correlate the performance of children with ADHD, with and without methylphenidate, compared to a control group with typical development. The study involved 36 participants of age 6-14 years, recruited at NANI-UNIFESP/SP, subdivided into three groups with 12 children in each. Data was collected through a musical keyboard using Logic Audio Software 9.0 on the computer that recorded the participant's performance in the tasks. Tasks were divided into sections: spontaneous time production, time estimation with simple sounds, and time estimation with music. (1) performance of ADHD groups in temporal estimation of simple sounds in short time intervals (30 ms) were statistically lower than that of control group (p < 0.05); (2) in the task comparing musical excerpts of the same duration (7 s), ADHD groups considered the tracks longer when the musical notes had longer durations, while in the control group, the duration was related to the density of musical notes in the track. The positive average performance observed in the three groups in most tasks perhaps indicates the possibility that music can, in some way, positively modulate the symptoms of inattention in ADHD.

Interleukin 4 receptor signaling in human monocytes and U937 cells involves the activation of a phosphatidylcholine-specific phospholipase C: a comparison with chemotactic peptide, FMLP, phospholipase D, and sphingomyelinase

PubMed Central

1994-01-01

Interleukin 4 (IL-4) diminishes cytokine activation of human macrophage. IL-4 binding to monocyte IL-4R is associated with protein kinase C (PKC) translocation to a nuclear fraction. The cleavage of diacyglycerol (DAG), an activator of PKC, from membrane phospholipids was investigated to define the proximal events of IL-4R signaling. IL-4 induced a statistically significant time-and dose-dependent generation of DAG. The IL-4-triggered production of DAG was not derived from phosphatidylinositol 4,5-bisphosphate (PIP2) hydrolysis, since neither cytosolic calcium flux nor liberation of inositol phosphates was detected in response to IL-4. Experiments were performed using [14C- methyl]choline-labeled U937 cells and monocytes to determine whether IL- 4R activated phospholipase C (PLC), PLD, or PLA2 to use membrane phosphatidylcholine (PC) to form DAG. IL-4 induced a time- and dose- dependent increase of phosphocholine (pchol) with concomitant degradation of membrane PC (p < 0.05 compared with control). The finding that the peak reduction of PC was equivalent to peak production of pchol suggested that IL-4R signaling involved the activation of a PC- specific PLC. Changes in choline (chol) or lyso-PC and glycerolphosphocholine, the respective products of PC cleavage by PLD or PLA2, were not detected in IL-4-treated cells. In contrast, exogenous PLD induced an increase in chol and concomitant loss of membrane PC. Additional investigation suggested that IL-4R signaling does not involve PLD. In cells labeled with L-lyso-3-PC 1-[1- 14C]palmitoyl, PLD but not IL-4, increased the production of phosphatidic acid (PA) and phosphatidyl-ethanol when pretreated with ethanol. Propranolol, an inhibitor of phosphatidate phosphohydrolase, and calyculin A, a phosphatase 1 and 2A inhibitor, blocked DAG production in response to FMLP but not to IL-4. In propranolol pretreated cells, PMA but not IL-4 triggered the production of PA and lowered the amount of DAG. Evidence that PLA2 is not coupled to IL-4R is the detection of arachidonate production in response to FMLP but not to IL-4. Furthermore, IL-4R is not coupled to sphingomyelinase (SMase) since IL-4, unlike exogenous SMase, did not generate ceramide but induced the hydrolysis of PC to pchol that was comparable to exogenous PLC. In summary, IL-4R signaling in monocytes and U937 cells involves PLC and not PLD, PLA2, or SMase, and it uses PC and not PIP2 to form DAG. PMID:7931078

The NOνA Module Factory Quality Assurance System

NASA Astrophysics Data System (ADS)

Smith, Alex; the NOνA Collaboration

The NOνA experiment will measure neutrino oscillations using a long-baseline beam, a ∼220-ton near detector and a ∼14-kiloton far detector. Production of ∼12500 modules to build these detectors is an industrial scale operation requiring careful quality assurance to meet the stringent technical specifications. Unlike a typical industrial operation, this project will use primarily a part time labor force of ∼200 University of Minnesota undergraduate students managed by a small team of full time employees. The quality assurance system is involved in nearly every aspect of the production: assembly, scheduling, training, payroll, materials, machine maintenance, test data, and safety compliance. The quality assurance data collected during the assembly process allows us to quickly identify and correct any problems that arise.

Solving a Production Scheduling Problem by Means of Two Biobjective Metaheuristic Procedures

NASA Astrophysics Data System (ADS)

Toncovich, Adrián; Oliveros Colay, María José; Moreno, José María; Corral, Jiménez; Corral, Rafael

2009-11-01

Production planning and scheduling problems emphasize the need for the availability of management tools that can help to assure proper service levels to customers, maintaining, at the same time, the production costs at acceptable levels and maximizing the utilization of the production facilities. In this case, a production scheduling problem that arises in the context of the activities of a company dedicated to the manufacturing of furniture for children and teenagers is addressed. Two bicriteria metaheuristic procedures are proposed to solve the sequencing problem in a production equipment that constitutes the bottleneck of the production process of the company. The production scheduling problem can be characterized as a general flow shop with sequence dependant setup times and additional inventory constraints. Two objectives are simultaneously taken into account when the quality of the candidate solutions is evaluated: the minimization of completion time of all jobs, or makespan, and the minimization of the total flow time of all jobs. Both procedures are based on a local search strategy that responds to the structure of the simulated annealing metaheuristic. In this case, both metaheuristic approaches generate a set of solutions that provides an approximation to the optimal Pareto front. In order to evaluate the performance of the proposed techniques a series of experiments was conducted. After analyzing the results, it can be said that the solutions provided by both approaches are adequate from the viewpoint of the quality as well as the computational effort involved in their generation. Nevertheless, a further refinement of the proposed procedures should be implemented with the aim of facilitating a quasi-automatic definition of the solution parameters.

Natural methods for increasing reproductive efficiency in small ruminants.

PubMed

Martin, G B; Milton, J T B; Davidson, R H; Banchero Hunzicker, G E; Lindsay, D R; Blache, D

2004-07-01

This paper describes three strategies to improve the reproductive performance of small ruminants in ways that lead to "clean, green and ethical" animal production. The first is aimed at control of the timing of reproductive events for which we turn to the socio-sexual inputs of the "male effect" to induce synchronised ovulation in females that would otherwise be anovulatory. The second strategy, "focussed feeding", is based on our knowledge of the responses to nutrition and aims to develop short programs of nutritional supplements that are precisely timed and specifically designed for individual events in the reproductive process, such as gamete production, embryo survival, fetal programming and colostrum production. The third strategy aims to maximise offspring survival by a combination of management, nutrition and genetic selection for behavior (temperament). All of these approaches involve non-pharmacological manipulation of the endogenous control systems of the animals and complement the detailed information from ultrasound that is now becoming available. The use of such clean, green and ethical tools in the management of our animals can be cost-effective, increase productivity and, at the same time, greatly improve the image of meat and milk industries in society and the marketplace.

Update on lifetime tests results and analysis carried out on Thales Cryogenics integral coolers (RM family)

NASA Astrophysics Data System (ADS)

Cauquil, Jean-Marc; Martin, Jean-Yves; Bruins, Peter; Benschop, A. A. J.

2003-01-01

The life time tests realised on the serial production of Rotary Mmonoblock RM2 coolers show a measured MTTF of 4900 hours. The conventional test profile applied to these coolers is representative of operation in typical application. The duration of such life time tests is very long. The results of a design change and its impact on MTTF are available only several months after the assembly of the prototypes. We decided to develop a test method in order to reduce the duration of these life time tests. The principle is to define a test protocol easy to implement, more severe than typical application profile in order to accelerate life time tests. The accelerated test profile was defined and tested successfully. This new technique allows us to reduce life time tests costs and duration and thus the costs involved. As a consequence, we decided to have a screening of our production with this accelerated test. This allows us to master continuously the quality of our serial products and to collect additional data. This paper presents the results of life time tests performed on RM2 coolers according to the conventional and accelerated test profiles as well as the first results on the new RM2 design which show a calculated MTTF of 10000 hours.

Dynamic profiling of different ready-to-drink fermented dairy products: A comparative study using Temporal Check-All-That-Apply (TCATA), Temporal Dominance of Sensations (TDS) and Progressive Profile (PP).

PubMed

Esmerino, Erick A; Castura, John C; Ferraz, Juliana P; Tavares Filho, Elson R; Silva, Ramon; Cruz, Adriano G; Freitas, Mônica Q; Bolini, Helena M A

2017-11-01

Despite the several differences in ingredients, processes and nutritional values, dairy foods as yogurts, fermented milks and milk beverages are widely accepted worldwide, and although they have their sensory profiling normally covered by descriptive analyses, the temporal perception involved during the consumption are rarely considered. In this sense, the present work aimed to assess the dynamic sensory profile of three categories of fermented dairy products using different temporal methodologies: Temporal Dominance of Sensations (TDS), Progressive Profiling (PP), Temporal CATA (TCATA), and compare the results obtained. The findings showed that the different sensory characteristics among the products are basically related to their commercial identity. Regarding the methods, all of them collected the variations between samples with great correlation between data. In addition, to detect differences in intensities, TCATA showed to be the most sensitive method in detecting textural changes. When using PP, a balanced experimental design considering the number of attributes, time intervals, and food matrix must be weighed. The findings are of interest to guide sensory and consumer practitioners involved in the dairy production to formulate/reformulate their products and help them choosing the most suitable dynamic method to temporally evaluate them. Copyright © 2017 Elsevier Ltd. All rights reserved.

A program downloader and other utility software for the DATAC bus monitor unit

NASA Technical Reports Server (NTRS)

Novacki, Stanley M., III

1987-01-01

A set or programs designed to facilitate software testing on the DATAC Bus Monitor is described. By providing a means to simplify program loading, firmware generation, and subsequent testing of programs, the overhead involved in software evaluation is reduced and that time is used more productively in performance, analysis and improvement of current software.

Nano-particulate Aluminium Nitride/Al: An Efficient and Versatile Heterogeneous Catalyst for the Synthesis of Biginelli Scaffolds

NASA Astrophysics Data System (ADS)

Tekale, S. U.; Tekale, A. B.; Kanhe, N. S.; Bhoraskar, S. V.; Pawar, R. P.

2011-12-01

Nano-particulate aluminium nitride/Al (7:1) is reported as a new heterogeneous solid acid catalyst for the synthesis of 3, 4-dihydroxypyrimidi-2-(1H)-ones and their sulphur analogues using the Biginelli reaction. This method involves short reaction time, easy separation, high yields and purity of products.

Equivalence: A Crucial Financial Concept for Extension, Consumer, and Investor Education

ERIC Educational Resources Information Center

Straka, Thomas J.

2010-01-01

Equivalence is a fundamental concept that is the basis of personal financial planning. Any Extension consumer financial education program would need the concept to explain financial products that involve a series of payments over some length of time (pensions, fixed annuities, and mortgages). A table of annuity factors is presented that can be…

The ALMA Band 3 (84-116 GHz) receiver production plan

NASA Astrophysics Data System (ADS)

Yeung, Keith; Claude, Stéphane; Loop, David

2008-07-01

The NRC Herzberg Institute of Astrophysics (NRC-HIA) is currently responsible to contribute Band 3 (84-116 GHz) receivers to the international ALMA project - a partnership involving North America, Europe and, now, Asia. Not only are the technical requirements for these receivers far more stringent than those for any existing radio astronomy receivers operating at these frequencies, but the delivery schedule for these receivers is equally challenging. Since the Asian partnership joined the ALMA project in 2006, NRC-HIA has been asked to deliver an additional 11 cartridges, for a total of 73 units. Some of these new cartridges will be used for the ALMA Compact Array (ACA) and others as spares. Moreover, the project has also requested that these additional cartridges be delivered in the same time period as the original 62 units. To meet this requirement, production must increase from the existing rate of one unit every four weeks to one every two, taxing the existing production infrastructure at NRC-HIA. Additional test facilities and human resources must be planned to sustain the required production rate over the next several years. Industrial involvement is one of the important elements in our production plan. In order to supplement the existing human resources at NRC-HIA, we are planning to outsource a number of low-risk and labor-intensive tasks to industry. However, NRC-HIA will retain overall project management responsibility and will conduct all the cartridge integration and acceptance test activities in-house. This paper focuses on the resource estimation, planning and project management required to deliver the Band 3 receivers to the ALMA project on time and on budget.

Chemical models for simulating single-walled nanotube production in arc vaporization and laser ablation processes

NASA Technical Reports Server (NTRS)

Scott, Carl D.

2004-01-01

Chemical kinetic models for the nucleation and growth of clusters and single-walled carbon nanotube (SWNT) growth are developed for numerical simulations of the production of SWNTs. Two models that involve evaporation and condensation of carbon and metal catalysts, a full model involving all carbon clusters up to C80, and a reduced model are discussed. The full model is based on a fullerene model, but nickel and carbon/nickel cluster reactions are added to form SWNTs from soot and fullerenes. The full model has a large number of species--so large that to incorporate them into a flow field computation for simulating laser ablation and arc processes requires that they be simplified. The model is reduced by defining large clusters that represent many various sized clusters. Comparisons are given between these models for cases that may be applicable to arc and laser ablation production. Solutions to the system of chemical rate equations of these models for a ramped temperature profile show that production of various species, including SWNTs, agree to within about 50% for a fast ramp, and within 10% for a slower temperature decay time.

Transcriptomic analysis for genetic mechanisms of the factors related to biofilm formation in Escherichia coli O157:H7.

PubMed

Lee, Jin-Hyung; Kim, Yong-Guy; Cho, Moo Hwan; Wood, Thomas K; Lee, Jintae

2011-04-01

Two lineages of enterohemorrhagic Escherichia coli O157:H7 (EDL933, Stx1(+) and Stx2(+)) and 86-24 (Stx2(+)) were investigated to determine the genetic basis of biofilm formation on abiotic surfaces. Strain EDL933 formed a robust biofilm while strain 86-24 formed almost no biofilm on either polystyrene plates or polyethylene tubes. Whole-transcriptome profiles of EDL933 versus 86-24 revealed that in the strong biofilm-forming strain, genes involved in curli biosynthesis and cellulose production were significantly induced, whereas genes involved in indole signaling were most repressed. Additionally, 49 phage genes were highly induced and repressed between the two strains. Curli assays using Congo red plates and scanning electron microscopy corroborated the microarray data as the EDL933 strain produced a large amount of curli, while strain 86-24 formed much less curli. Moreover, EDL933 produced 19-fold more cellulose than 86-24, and indole production in EDL933 was two times lower than that of the strain 86-24. Therefore, it appears E. coli O157:H7 EDL933 produces more biofilm because of its increased curli and cellulose production and reduced indole production.

Transcriptome and Gene Ontology (GO) Enrichment Analysis Reveals Genes Involved in Biotin Metabolism That Affect L-Lysine Production in Corynebacterium glutamicum.

PubMed

Kim, Hong-Il; Kim, Jong-Hyeon; Park, Young-Jin

2016-03-09

Corynebacterium glutamicum is widely used for amino acid production. In the present study, 543 genes showed a significant change in their mRNA expression levels in L-lysine-producing C. glutamicum ATCC21300 than that in the wild-type C. glutamicum ATCC13032. Among these 543 differentially expressed genes (DEGs), 28 genes were up- or downregulated. In addition, 454 DEGs were functionally enriched and categorized based on BLAST sequence homologies and gene ontology (GO) annotations using the Blast2GO software. Interestingly, NCgl0071 (bioB, encoding biotin synthase) was expressed at levels ~20-fold higher in the L-lysine-producing ATCC21300 strain than that in the wild-type ATCC13032 strain. Five other genes involved in biotin metabolism or transport--NCgl2515 (bioA, encoding adenosylmethionine-8-amino-7-oxononanoate aminotransferase), NCgl2516 (bioD, encoding dithiobiotin synthetase), NCgl1883, NCgl1884, and NCgl1885--were also expressed at significantly higher levels in the L-lysine-producing ATCC21300 strain than that in the wild-type ATCC13032 strain, which we determined using both next-generation RNA sequencing and quantitative real-time PCR analysis. When we disrupted the bioB gene in C. glutamicum ATCC21300, L-lysine production decreased by approximately 76%, and the three genes involved in biotin transport (NCgl1883, NCgl1884, and NCgl1885) were significantly downregulated. These results will be helpful to improve our understanding of C. glutamicum for industrial amino acid production.

Nano-material and method of fabrication

DOEpatents

Menchhofer, Paul A; Seals, Roland D; Howe, Jane Y; Wang, Wei

2015-02-03

A fluffy nano-material and method of manufacture are described. At 2000.times. magnification the fluffy nanomaterial has the appearance of raw, uncarded wool, with individual fiber lengths ranging from approximately four microns to twenty microns. Powder-based nanocatalysts are dispersed in the fluffy nanomaterial. The production of fluffy nanomaterial typically involves flowing about 125 cc/min of organic vapor at a pressure of about 400 torr over powder-based nano-catalysts for a period of time that may range from approximately thirty minutes to twenty-four hours.

Analyzing the influence of manufacturing conditions of reclaimed asphalt concrete on the characteristics of the asphalt binder: development of a gradual binder extraction method

NASA Astrophysics Data System (ADS)

Navaro, J.; Bruneau, D.; Drouadaine, I.; Pouteau, B.; Colin, J.; Dony, A.

2012-05-01

When asphalt concrete is manufactured incorporating a high percentage (almost 70%) of reclaimed materials from the deconstruction of road surfaces under renovation, and when the corresponding production device is designed specifically to reduce the energy input need (lowering the production temperature), the resulting manufacturing process contributes to the protection of the environment and reduces production costs. However, to meet the quality requirements of the finished product, virgin materials of appropriate quality and quantity must also be added (mineral aggregates and new asphalt binder) and control systems set up to quantify and optimize the parameters involved (thus avoiding the guess work which still often prevails today). It was for this reason that a new experimental technique described here was devised, which will ultimately be used in asphalt concrete production plants. The technique involves lixiviating reclaimed asphalt concrete using a chlorinated solvent; the resulting solute is collected gradually, then the mixture of binders (virgin and reclaimed asphalt concrete) can be characterized and their mass fractions quantified using a combination of UV and IR spectrometry. With this experimental technique we were able to assess the extent to which the reclaimed asphalt pavement binder participates in the agglomeration and cohesion of the reclaimed asphalt concrete. This assessment was made in terms of the main parameters in the production process, temperature of the materials and mixing time.

Three-Dimensional Printing of Medicinal Products and the Challenge of Personalized Therapy.

PubMed

Zema, Lucia; Melocchi, Alice; Maroni, Alessandra; Gazzaniga, Andrea

2017-07-01

By 3-dimensional (3D) printing, solid objects of any shape are fabricated through layer-by-layer addition of materials based on a digital model. At present, such a technique is broadly exploited in many industrial fields because of major advantages in terms of reduced times and costs of development and production. In the biomedical and pharmaceutical domains, the interest in 3D printing is growing in step with the needs of personalized medicine. Printed scaffolds and prostheses have partly replaced medical devices produced by more established techniques, and more recently, 3D printing has been proposed for the manufacturing of drug products. Notably, the availability of patient-tailored pharmaceuticals would be of utmost importance for children, elderly subjects, poor and high metabolizers, and individuals undergoing multiple drug treatments. 3D printing encompasses a range of differing techniques, each involving advantages and open issues. Particularly, solidification of powder, extrusion, and stereolithography have been applied to the manufacturing of drug products. The main challenge to their exploitation for personalized pharmacologic therapy is likely to be related to the regulatory issues involved and to implementation of production models that may allow to efficiently turn the therapeutic needs of individual patients into small batches of appropriate drug products meeting preset quality requirements. Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

The Role of Sustained Attention in the Production of Conjoined Noun Phrases: An Individual Differences Study

PubMed Central

Jongman, Suzanne R.; Meyer, Antje S.; Roelofs, Ardi

2015-01-01

It has previously been shown that language production, performed simultaneously with a nonlinguistic task, involves sustained attention. Sustained attention concerns the ability to maintain alertness over time. Here, we aimed to replicate the previous finding by showing that individuals call upon sustained attention when they plan single noun phrases (e.g., "the carrot") and perform a manual arrow categorization task. In addition, we investigated whether speakers also recruit sustained attention when they produce conjoined noun phrases (e.g., "the carrot and the bucket") describing two pictures, that is, when both the first and second task are linguistic. We found that sustained attention correlated with the proportion of abnormally slow phrase-production responses. Individuals with poor sustained attention displayed a greater number of very slow responses than individuals with better sustained attention. Importantly, this relationship was obtained both for the production of single phrases while performing a nonlinguistic manual task, and the production of noun phrase conjunctions in referring to two spatially separated objects. Inhibition and updating abilities were also measured. These scores did not correlate with our measure of sustained attention, suggesting that sustained attention and executive control are distinct. Overall, the results suggest that planning conjoined noun phrases involves sustained attention, and that language production happens less automatically than has often been assumed. PMID:26335441

Consumer involvement: effects on information processing from over-the-counter medication labels.

PubMed

Sansgiry, S S; Cady, P S; Sansgiry, S

2001-01-01

The objective of this study was to evaluate the effects of consumer involvement on information processing from over-the-counter (OTC) medication labels. A sample of 256 students evaluated simulated OTC product labels for two product categories (headache and cold) in random order. Each participant evaluated labels after reading a scenario to simulate high and low involvement respectively. A questionnaire was used to collect data on variables such as label comprehension, attitude-towards-product label, product evaluation, and purchase intention. The results indicate that when consumers are involved in their purchase of OTC medications they are significantly more likely to understand information from the label and evaluate it accordingly. However, involvement does not affect attitude-towards-product label nor does it enhance purchase intention.

The supplementary motor area in motor and perceptual time processing: fMRI studies.

PubMed

Macar, Françoise; Coull, Jennifer; Vidal, Franck

2006-06-01

The neural bases of timing mechanisms in the second-to-minute range are currently investigated using multidisciplinary approaches. This paper documents the involvement of the supplementary motor area (SMA) in the encoding of target durations by reporting convergent fMRI data from motor and perceptual timing tasks. Event-related fMRI was used in two temporal procedures, involving (1) the production of an accurate interval as compared to an accurate force, and (2) a dual-task of time and colour discrimination with parametric manipulation of the level of attention attributed to each parameter. The first study revealed greater activation of the SMA proper in skilful control of time compared to force. The second showed that increasing attentional allocation to time increased activity in a cortico-striatal network including the pre-SMA (in contrast with the occipital cortex for increasing attention to colour). Further, the SMA proper was sensitive to the attentional modulation cued prior to the time processing period. Taken together, these data and related literature suggest that the SMA plays a key role in time processing as part of the striato-cortical pathway previously identified by animal studies, human neuropsychology and neuroimaging.

Pupal habitat productivity of Anopheles gambiae complex mosquitoes in a rural village in western Kenya.

PubMed

Mutuku, Francis M; Bayoh, M Nabie; Gimnig, John E; Vulule, John M; Kamau, Luna; Walker, Edward D; Kabiru, Ephantus; Hawley, William A

2006-01-01

The productivity of larval habitats of the malaria vector Anopheles gambiae for pupae (the stage preceding adult metamorphosis) is poorly known, yet adult emergence from habitats is the primary determinant of vector density. To assess it, we used absolute sampling methods in four studies involving daily sampling for 25 days in 6 habitat types in a village in western Kenya. Anopheles gambiae s.s. comprised 82.5% of emergent adults and Anopheles arabiensis the remainder. Pupal production occurred from a subset of habitats, primarily soil burrow pits, and was discontinuous in time, even when larvae occupied all habitats continuously. Habitat stability was positively associated with pupal productivity. In a dry season, pupal productivity was distributed between burrow pits and pools in streambeds. Overall, these data support the notion that source reduction measures against recognizably productive habitats would be a useful component of an integrated management program for An. gambiae in villages.

Transcriptome survey of the lipid metabolic pathways involved in energy production and ecdysteroid synthesis in the salmon louse Caligus rogercresseyi (Crustacea: Copepoda).

PubMed

Gonçalves, Ana Teresa; Farlora, Rodolfo; Gallardo-Escárate, Cristian

2014-10-01

The goal of this study was to identify and analyze the lipid metabolic pathways involved in energy production and ecdysteroid synthesis in the ectoparasite copepod Caligus rogercresseyi. Massive transcriptome sequencing analysis was performed during the infectious copepodid larval stage, during the attached chalimus larval stage, and also in female and male adults. Thirty genes were selected for describing the pathways, and these were annotated for proteins or enzymes involved in lipid digestion, absorption, and transport; fatty acid degradation; the synthesis and degradation of ketone bodies; and steroid and ecdysteroid syntheses. Differential expression of these genes was analyzed by ontogenic stage and discussed considering each stage's feeding habits and energetic needs. Copepodids showed a low expression of fatty acid digestion genes, reflected by a non-feeding behavior, and the upregulation of genes involved in steroid biosynthesis, which was consistent with a pathway for cholesterol synthesis during ecdysis. The chalimus stage showed an upregulation of genes related to fatty acid digestion, absorption, and transport, as well as to fatty acid degradation and the synthesis of ketone bodies, therefore suggesting that lipids ingested from the mucus and skin of the host fish are metabolized as important sources of energy. Adult females also showed a pattern of high lipid metabolism for energy supply and mobilization in relation to reproduction and vitellogenesis. Adult females and males revealed different lipid metabolism patterns that reflected different energetic needs. This study reports for the first time the probable lipid metabolic pathways involved in the energy production and ecdysteroid synthesis of C. rogercresseyi. Copyright © 2014 Elsevier Inc. All rights reserved.

[Consumer involvement in the Disease Management Guideline for Asthma--a background report].

PubMed

Senger, Sylvia; Lelgemann, Monika; Kopp, Ina

2006-01-01

In the past clinical guidelines were mainly developed by experts and in everyday clinical practice almost exclusively used by clinical experts, while issues that were relevant from the patients' (consumers') point of view tended to be neglected. But then, the majority of patient information has not been perceptibly connected to clinical guidelines. Connecting the development of clinical guidelines with the development of patient information publications would make good sense for both products, though. On the one hand, evidence-based treatment guidelines could be made available to the actual target group of the clinical care process--i.e. the patients or consumers--and on the other hand, patient experiences and competencies (social evidence) might inform the production of guidelines. Such a procedure demands the cooperation of clinical experts and patients. So far there are no generally accepted methods in Germany for the practical implementation of consumer involvement on both the organizational and content level with the aim of involving patients in the development process of guidelines as well as the production of the respective patient information versions. Such a methodology shall be established as part of the National Program for Disease Management Guidelines. For the first time in this program, patient involvement is being exercised within the scope of the National Disease Management Guideline for Asthma (NDM Asthma). Here, patients are involved in the NDM development process by providing the opportunity to comment on the consented guideline draft and to participate in the translation of the NDM Asthma into a patient version. The present paper is a background report describing the current state of work and indicating consequences for some future developments.

Symbiosis of Steel, Energy, and CO2 Evolution in Korea

NASA Astrophysics Data System (ADS)

Lee, Hyunjoung; Matsuura, Hiroyuki; Sohn, Il

2016-09-01

This study looks at the energy intensity of the steel industry and the greenhouse gas intensity involved with the production of steel. Using several sources of steel production data and the corresponding energy sources used provides a time-series analysis of the greenhouse gas (GHG) and energy intensity from 1990 to 2014. The impact of the steel economy with the gross domestic product (GDP) provides indirect importance of the general manufacturing sector within Korea and in particular the steel industry. Beyond 2008, the shift in excess materials production and significant increase in total imports have led to an imbalance in the Korean steel market and continue to inhibit the growth of the domestic steel market. The forecast of the GHG and energy intensity along with the steel production up to 2030 is provided using the auto regressive integrated moving average analysis.

[Productive social activities in mothers of intellectually disabled children moderate the relationship between caregiver burden and self-rated health].

PubMed

Yatsugi, Sawa; Suzukamo, Yoshimi; Izumi, Sinichi

2013-07-01

Recently, the length of time for which intellectually disabled children receive homecare has increased; hence, the mothers caring for these intellectually disabled children at home are being exposed to increasingly heavy caregiver burden. Previous studies have reported that negative psychological states, including caregiver burden, influence self-rated health status; however, when elderly people engaged in productive social activities, they experienced heightened positive psychological states. Therefore, the objective of this study was to investigate whether mothers' participation in productive social activities influenced the relationship between caregiver burden and self-rated health status. We performed a cross-sectional study using a questionnaire that included items on self-rated health, the modified Japanese version of the Zarit Caregiver Burden Interview, productive social activities, and various confounding variables. We sent the questionnaires to 270 mothers belonging to patient and family advocacy groups. We then compared the self-rated health and caregiver burden between a group of mothers involved in productive social activities and a group not involved in such activities. The relationships between self-rated health, caregiver burden, and productive social activities were analyzed using analysis of variance (ANOVA) and post-hoc testing. We obtained 120 valid responses. Mothers with greater burden had worse self-rated health than the other group (r=-0.305). According to the ANOVA results, the self-rated health of mothers involved in productive social activities did not significantly differ between caregiver burden groups (mild burden group: 3.4 vs. severe burden group: 3.12; F=1.3, P=.253), whereas the self-rated health of mothers without productive social activities showed a significant difference between caregiver burden groups (mild burden group: 3.4 vs. severe burden group: 2.7; F=5.6, P=.017). Mothers with greater burden had worse self-rated health. However, in mothers who were engaged in productive social activities, self-rated health did not differ between the mild burden and severe burden groups. Therefore, productive social activities can favorably moderate the relationship between caregiver burden and self-rated health.

Unifying three perspectives on information processing in stochastic thermodynamics.

PubMed

Barato, A C; Seifert, U

2014-03-07

So far, feedback-driven systems have been discussed using (i) measurement and control, (ii) a tape interacting with a system, or (iii) by identifying an implicit Maxwell demon in steady-state transport. We derive the corresponding second laws from one master fluctuation theorem and discuss their relationship. In particular, we show that both the entropy production involving mutual information between system and controller and the one involving a Shannon entropy difference of an information reservoir like a tape carry an extra term different from the usual current times affinity. We, thus, generalize stochastic thermodynamics to the presence of an information reservoir.

Dealing with the time-varying parameter problem of robot manipulators performing path tracking tasks

NASA Technical Reports Server (NTRS)

Song, Y. D.; Middleton, R. H.

1992-01-01

Many robotic applications involve time-varying payloads during the operation of the robot. It is therefore of interest to consider control schemes that deal with time-varying parameters. Using the properties of the element by element (or Hadarmad) product of matrices, we obtain the robot dynamics in parameter-isolated form, from which a new control scheme is developed. The controller proposed yields zero asymptotic tracking errors when applied to robotic systems with time-varying parameters by using a switching type control law. The results obtained are global in the initial state of the robot, and can be applied to rapidly varying systems.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, C.

This profile covers aseptic boxes and paper milk cartons because they are collected together in recycling programs, but statistics are given separately for each product. Aseptic boxes, more commonly known as drink boxes, are used for fruit juices and milk. Aseptic processing involves a high-temperature/short-time treatment in which liquid products are heated quickly to a temperature at which sterilization occurs. The product is then cooled and placed in a sterile container. By weight, aseptic boxes are 70% paper (used for stiffness and strength), 24% polyethylene (used in four different layers to seal the package liquid-tight), and 6% aluminum foil (usedmore » as a barrier against air and light). By weight, milk cartons are 80% paper and 20% polyethylene.« less

Evaluation of disintegration testing of different fast dissolving tablets using the texture analyzer.

PubMed

el-Arini, Silvia Kocova; Clas, Sophie-Dorothée

2002-01-01

The in vitro disintegration behavior of fast dissolving systems manufactured by the main commercialized technologies was studied using the texture analyzer (TA) instrument. Quantitative parameters were employed to characterize the effect of the major test variables on the disintegration profiles. The average disintegration profiles of the products were compared using the test conditions that minimized these effects and at the same time mimicked the in vivo situation in the patient's mouth. The differences in the disintegration mechanisms of the fast dissolving systems were reflected in the shape of their disintegration profiles and in the parameters derived from the profiles. The differences were explained in relation to the technology and/or formulation characteristics involved in the manufacture of each product. The in vitro disintegration times obtained under the simulated in vivo conditions were correlated with the reported in vivo disintegration times.

Perceived strategies and activities for successful later aging.

PubMed

Holahan, Carole K; Velasquez, Katherine S

2011-01-01

This study investigated perceived strategies and activities for successful later aging. Participants were 242 members of the Terman Study of the Gifted who responded to an open-ended question concerning how they make the most of their aging years. Data were collected in 1996 and 1999, when the participants were average ages of 84 and 86. Longitudinal analyses examined changes over time and cross-sectional analyses examined correlates of strategies and activities. Results showed that strategies emphasized emotion regulation and adaptation. Activities emphasized family involvement, social relationships, leisure, productive and intellectual activity, and health maintenance. Reports of emotion regulation and adaptation increased over time and mention of an intellectual orientation declined over time. Variations in activity mention were found according to gender, age, self-rated health, health limitations, and life satisfaction. History of higher-level occupations was related to more productive activities. Results are discussed in terms of the challenges of later aging.

Entropy production of doubly stochastic quantum channels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Müller-Hermes, Alexander, E-mail: muellerh@posteo.net; Department of Mathematical Sciences, University of Copenhagen, 2100 Copenhagen; Stilck França, Daniel, E-mail: dsfranca@mytum.de

2016-02-15

We study the entropy increase of quantum systems evolving under primitive, doubly stochastic Markovian noise and thus converging to the maximally mixed state. This entropy increase can be quantified by a logarithmic-Sobolev constant of the Liouvillian generating the noise. We prove a universal lower bound on this constant that stays invariant under taking tensor-powers. Our methods involve a new comparison method to relate logarithmic-Sobolev constants of different Liouvillians and a technique to compute logarithmic-Sobolev inequalities of Liouvillians with eigenvectors forming a projective representation of a finite abelian group. Our bounds improve upon similar results established before and as an applicationmore » we prove an upper bound on continuous-time quantum capacities. In the last part of this work we study entropy production estimates of discrete-time doubly stochastic quantum channels by extending the framework of discrete-time logarithmic-Sobolev inequalities to the quantum case.« less

Oil and gas taxation in Algeria: exploration and production activities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frilet, M.

1982-09-01

The Algerian taxation scheme for foreign companies involved in the petroleum sector is profoundly different depending on whether the company is directly involved in exploration and production or is merely acting as a service company or contractor. This article discusses Algerian taxation of foreign companies directly involved in production and exploration.

Improvement of Stand Jig Sealer and Its Increased Production Capacity

NASA Astrophysics Data System (ADS)

Soebandrija, K. E. N.; Astuti, S. W. D.

2014-03-01

This paper has the objective to prove that improvement of Stand Jig Sealer can lead to the cycle time target as part of Improvement efforts and its Productivity. Prior researches through prior journals both classics journal such as Quesnay (1766) and Solow (1957) and updated journal such as Reikard (2011) researches, are mentioned and elaborated. Precisely, the research is narrowed down and specified into automotive industry and eventually the software related of SPSS and Structural Equation Modeling ( SEM ). The analysis and its method are conducted through the calculation working time. The mentioned calculation are reinforced with the hypothesis test using SPSS Version 19 and involve parameters of production efficiency, productivity calculation, and the calculation of financial investments. The results obtained are augmented achievement of cycle time target ≤ 80 seconds posterior to improvement stand jig sealer. The result from calculation of SPSS-19 version comprise the following aspects: the one-sided hypothesis test is rejection of Ho:μ≥80 seconds, the correlation rs=0.84, regression y = 0.159+0.642x, validity R table = 0.4438, reliability value of Cronbach's alpha = 0.885>0.70, independence (Chi Square) Asymp. Sig=0.028<0.05, 95% efficiency, increase productivity 11%, financial analysis (NPV 2,340,596>0, PI 2.04>1, IRR 45.56%>i=12.68%, PP=1.86). The Mentioned calculation results support the hypothesis and ultimately align with the objective of this paper to prove that improvement of Stand Jig Sealer and its relation toward the cycle time target. Precisely, the improvement of production capacity of PT. Astra Daihatsu Motor.

Evaluation of a co-delivered training package for community mental health professionals on service user- and carer-involved care planning.

PubMed

Grundy, A C; Walker, L; Meade, O; Fraser, C; Cree, L; Bee, P; Lovell, K; Callaghan, P

2017-08-01

WHAT IS KNOWN ON THE SUBJECT?: There is consistent evidence that service users and carers feel marginalized in the process of mental health care planning. Mental health professionals have identified ongoing training needs in relation to involving service users and carers in care planning. There is limited research on the acceptability of training packages for mental health professionals which involve service users and carers as co-facilitators. WHAT DOES THIS PAPER ADD TO EXISTING KNOWLEDGE?: A co-produced and co-delivered training package on service user- and carer-involved care planning was acceptable to mental health professionals. Aspects of the training that were particularly valued were the co-production model, small group discussion and the opportunity for reflective practice. The organizational context of care planning may need more consideration in future training models. WHAT ARE THE IMPLICATIONS FOR PRACTICE?: Mental health nurses using co-production models of delivering training to other mental health professionals can be confident that such initiatives will be warmly welcomed, acceptable and engaging. On the basis of the results reported here, we encourage mental health nurses to use co-production approaches more often. Further research will show how clinically effective this training is in improving outcomes for service users and carers. Background There is limited evidence for the acceptability of training for mental health professionals on service user- and carer-involved care planning. Aim To investigate the acceptability of a co-delivered, two-day training intervention on service user- and carer-involved care planning. Methods Community mental health professionals were invited to complete the Training Acceptability Rating Scale post-training. Responses to the quantitative items were summarized using descriptive statistics (Miles, ), and qualitative responses were coded using content analysis (Weber, ). Results Of 350 trainees, 310 completed the questionnaire. The trainees rated the training favourably (median overall TARS scores = 56/63; median 'acceptability' score = 34/36; median 'perceived impact' score = 22/27). There were six qualitative themes: the value of the co-production model; time to reflect on practice; delivery preferences; comprehensiveness of content; need to consider organizational context; and emotional response. Discussion The training was found to be acceptable and comprehensive with participants valuing the co-production model. Individual differences were apparent in terms of delivery preferences and emotional reactions. There may be a need to further address the organizational context of care planning in future training. Implications for practice Mental health nurses should use co-production models of continuing professional development training that involve service users and carers as co-facilitators. © 2017 The Authors. Journal of Psychiatric and Mental Health Nursing Published by John Wiley & Sons Ltd.

2D simulation of active species and ozone production in a multi-tip DC air corona discharge

NASA Astrophysics Data System (ADS)

Meziane, M.; Eichwald, O.; Sarrette, J. P.; Ducasse, O.; Yousfi, M.

2011-11-01

The present paper shows for the first time in the literature a complete 2D simulation of the ozone production in a DC positive multi-tip to plane corona discharge reactor crossed by a dry air flow at atmospheric pressure. The simulation is undertaken until 1 ms and involves tens of successive discharge and post-discharge phases. The air flow is stressed by several monofilament corona discharges generated by a maximum of four anodic tips distributed along the reactor. The nonstationary hydrodynamics model for reactive gas mixture is solved using the commercial FLUENT software. During each discharge phase, thermal and vibrational energies as well as densities of radical and metastable excited species are locally injected as source terms in the gas medium surrounding each tip. The chosen chemical model involves 10 neutral species reacting following 24 reactions. The obtained results allow us to follow the cartography of the temperature and the ozone production inside the corona reactor as a function of the number of high voltage anodic tips.

Efficient degradation of Azo dyes by a newly isolated fungus Trichoderma tomentosum under non-sterile conditions.

PubMed

He, Xiao-Ling; Song, Chao; Li, Yuan-Yuan; Wang, Ning; Xu, Lei; Han, Xin; Wei, Dong-Sheng

2018-04-15

A fast-growing fungus with remarkable ability to degrade several azo dyes under non-sterile conditions was isolated and identified. This fungus was identified as Trichoderma tomentosum. Textile effluent of ten-fold dilution could be decolorized by 94.9% within 72h before optimization. Acid Red 3R model wastewater with a concentration of 85.5mgL -1 could be decolorized by 99.2% within the same time after optimization. High-level of manganese peroxidase and low-level of lignin peroxidase activities were detected during the process of decolorization from the culture supernatant, indicating the possible involvement of two enzymes in azo dye decolorization. No aromatic amine products were detected from the degradation products of Acid Red 3R by gas chromatography-mass spectrometry (GC/MS) analysis, indicating the possible involvement of a special symmetrical oxidative degradation pathway. Phytotoxicity assay confirmed the lower toxicity toward the test plant seeds of the degradation products when compared to the original dye. Copyright © 2017 Elsevier Inc. All rights reserved.

Your idea and your university: issues in academic technology transfer.

PubMed

Smith, Charles D

2011-06-01

Research discoveries may lead to products for commercial development. A central consideration for the researcher is how involved she or he will be in the commercialization process. In some cases, a university out-licenses the intellectual property, whereas in other cases, the investigator may want to be involved in the development process and choose to start his or her own company to develop and possibly to manufacture and sell the product. Before undertaking such a challenge, however, the investigator-turned-entrepreneur must consider a variety of issues, including career goals, financial and time commitments, potential conflicts of interest and/or commitment, start-up funding, and his or her ability to run a company or step aside to allow business experts to make necessary decisions. This paper discusses some personal considerations in deciding to start a spinout company and provides information on some of the available government grants to assist you should you decide to undertake your product's commercial development. In particular, the Small Business Innovative Research and Small Business Technology Transfer programs of federal funding agencies often are the source of early funding for new biomedical companies.

The use of expanded clay dust in paint manufacturing

NASA Astrophysics Data System (ADS)

Sverguzova, S. V.; Sapronova, Zh A.; Starostina, Yu L.; Belovodskiy, E. A.

2018-01-01

Production increase of useful products is accompanied by the formation and the accumulation of the vast amounts of industrial wastes, the bulk of which is not involved in the recycling processes. An example of such wastes is dust bag filters of ceramsite production. At the large enterprises, the volume of its formation can reach 7-8 tons of dust per day, which is 10-15% of feedstock mass. The studies on the use of ceramsite production dust as filler pigment in the composition of organic mixed primer of red-brown color are carried out in this work. For comparison, red iron oxide pigment (Pg FGM) was used. The results showed that, primer with the use of expanded clay dust is characterized by the short drying time and meets all regulatory requirements.

Managing Pain from a Broken Hip: A Guide for Adults and Their Caregivers

MedlinePlus

... to main content Health Topics Consumers Products & Tools Research Methods Get Involved Browse Products About News Contact Us ... website Submit search Health Topics Consumers Products & Tools Research Methods Get Involved Browse Products Home Managing Pain From ...

A survey of the reformulation of Australian child-oriented food products

PubMed Central

2013-01-01

Background Childhood obesity is one of the most pressing public health challenges of the 21st century. Reformulating commonly eaten food products is a key emerging strategy to improve the food supply and help address rising rates of obesity and chronic disease. This study aimed to monitor reformulation of Australian child-oriented food products (products marketed specifically to children) from 2009–2011. Methods In 2009, all child-oriented food products in a large supermarket in metropolitan Adelaide were identified. These baseline products were followed up in 2011 to identify products still available for sale. Nutrient content data were collected from Nutrient Information Panels in 2009 and 2011. Absolute and percentage change in nutrient content were calculated for energy, total fat, saturated fat, sugars, sodium and fibre. Data were descriptively analysed to examine reformulation in individual products, in key nutrients, within product categories and across all products. Two methods were used to assess the extent of reformulation; the first involved assessing percentage change in single nutrients over time, while the second involved a set of nutrient criteria to assess changes in overall healthiness of products over time. Results Of 120 products, 40 remained unchanged in nutrient composition from 2009–2011 and 80 underwent change. The proportions of positively and negatively reformulated products were similar for most nutrients surveyed, with the exception of sodium. Eighteen products (15%) were simultaneously positively and negatively reformulated for different nutrients. Using percentage change in nutrient content to assess extent of reformulation, nearly half (n = 53) of all products were at least moderately reformulated and just over one third (n = 42) were substantially reformulated. The nutrient criteria method revealed 5 products (6%) that were positively reformulated and none that had undergone negative reformulation. Conclusion Positive and negative reformulation was observed to a similar extent within the sample indicating little overall improvement in healthiness of the child-oriented food supply from 2009–2011. In the absence of agreed reformulation standards, the extent of reformulation was assessed against criteria developed specifically for this project. While arbitrary in nature, these criteria were based on reasonable assessment of the meaningfulness of reformulation and change in nutrient composition. As well as highlighting nutrient composition changes in a number of food products directed to children, this study emphasises the need to develop comprehensive, targeted and standardised reformulation benchmarks to assess the extent of reformulation occurring in the food supply. PMID:24025190

Loxoprofen sodium treatment for elderly men with refractory nocturia: effect on night-time urine production.

PubMed

Okada, Shinsuke; Watanabe, Hideki; Kojima, Yoshiyuki; Yanai, Yoshimasa; Sasaki, Shoichi; Kohri, Kenjiro

2008-05-01

We evaluated the efficacy of loxoprofen sodium for refractory nocturia. Twelve men (mean age, 75.1 +/- 5.7) with nocturia were enrolled in this study. All patients received 60 mg loxoprofen sodium prior to sleeping at night for 14 days. Nine of 12 patients (75%) felt more satisfaction than previous treatments. Patients were grouped into a loxoprofen sodium-effective (n = 7) and ineffective groups (n = 5) based on the results of the frequency-volume chart. In the effective group, interestingly, night-time urine volume showed significant reduction (P < 0.05). On the other hand, the average single voided volume at night and 24-h urine volume showed no significant change. There was a statistically significant difference in the night-time urine volume after treatment between groups (P < 0.01). Loxoprofen sodium is an effective treatment for some patients with refractory nocturia. The main effect mechanism of loxoprofen sodium may involve the reduction of night-time urine production.

Executive functioning and processing speed in age-related differences in time estimation: a comparison of young, old, and very old adults.

PubMed

Baudouin, Alexia; Isingrini, Michel; Vanneste, Sandrine

2018-01-25

Age-related differences in time estimation were examined by comparing the temporal performance of young, young-old, and old-old adults, in relation to two major theories of cognitive aging: executive decline and cognitive slowing. We tested the hypothesis that processing speed and executive function are differentially involved in timing depending on the temporal task used. We also tested the assumption of greater age-related effects in time estimation in old-old participants. Participants performed two standard temporal tasks: duration production and duration reproduction. They also completed tests measuring executive function and processing speed. Findings supported the view that executive function is the best mediator of reproduction performance and inversely that processing speed is the best mediator of production performance. They also showed that young-old participants provide relatively accurate temporal judgments compared to old-old participants. These findings are discussed in terms of compensation mechanisms in aging.

Real Time Pricing and Deregulating the Electricity Market,

DTIC Science & Technology

1980-02-01

policy is adopted, there is probably no better way to encourage innovation in the production and use of electricity. The same mechanism also...hard questions, involving both the policy objectives and the feasibility of attaining them. These fall into four broad categories: 1. Institutional...Systems; Conservation and Solar Applications; Policy ; Resource Applications; and the Energy Regulatory Administration. Technologically oriented groups

Employment Policy for the Hard-to-Employ: The Path of Progress. A Statement by the Program Committee.

ERIC Educational Resources Information Center

Committee for Economic Development, New York, NY.

At a time of high unemployment and increasingly constrained public resources, more and more attention is being focused on how to further the private sector's involvement in expanding opportunities for individuals, especially the hard-to-employ, to obtain long-term productive employment. Although at least 12 pieces of federal legislation that…

29 CFR 5.15 - Limitations, variations, tolerances, and exemptions under the Contract Work Hours and Safety...

Code of Federal Regulations, 2011 CFR

2011-07-01

...). (iii) The time in question does not involve productive work or performance of the apprentice's or... receives gross wages of not less than $300 per week regardless of the total number of hours worked in any workweek, and (B) Within any workweek the total wages which an employee receives are not less than the...

Gene–culture coevolution and the nature of human sociality

PubMed Central

Gintis, Herbert

2011-01-01

Human characteristics are the product of gene–culture coevolution, which is an evolutionary dynamic involving the interaction of genes and culture over long time periods. Gene–culture coevolution is a special case of niche construction. Gene–culture coevolution is responsible for human other-regarding preferences, a taste for fairness, the capacity to empathize and salience of morality and character virtues. PMID:21320901

Latest development in the synthesis of ursodeoxycholic acid (UDCA): a critical review

PubMed Central

Tonin, Fabio

2018-01-01

Ursodeoxycholic acid (UDCA) is a pharmaceutical ingredient widely used in clinics. As bile acid it solubilizes cholesterol gallstones and improves the liver function in case of cholestatic diseases. UDCA can be obtained from cholic acid (CA), which is the most abundant and least expensive bile acid available. The now available chemical routes for the obtainment of UDCA yield about 30% of final product. For these syntheses several protection and deprotection steps requiring toxic and dangerous reagents have to be performed, leading to the production of a series of waste products. In many cases the cholic acid itself first needs to be prepared from its taurinated and glycilated derivatives in the bile, thus adding to the complexity and multitude of steps involved of the synthetic process. For these reasons, several studies have been performed towards the development of microbial transformations or chemoenzymatic procedures for the synthesis of UDCA starting from CA or chenodeoxycholic acid (CDCA). This promising approach led several research groups to focus their attention on the development of biotransformations with non-pathogenic, easy-to-manage microorganisms, and their enzymes. In particular, the enzymatic reactions involved are selective hydrolysis, epimerization of the hydroxy functions (by oxidation and subsequent reduction) and the specific hydroxylation and dehydroxylation of suitable positions in the steroid rings. In this minireview, we critically analyze the state of the art of the production of UDCA by several chemical, chemoenzymatic and enzymatic routes reported, highlighting the bottlenecks of each production step. Particular attention is placed on the precursors availability as well as the substrate loading in the process. Potential new routes and recent developments are discussed, in particular on the employment of flow-reactors. The latter technology allows to develop processes with shorter reaction times and lower costs for the chemical and enzymatic reactions involved. PMID:29520309

The Proteome and Lipidome of Thermococcus kodakarensis across the Stationary Phase

PubMed Central

Yoshinaga, Marcos Y.; Garcia Prado, Franka; Hinrichs, Kai-Uwe; Thomm, Michael

2016-01-01

The majority of cells in nature probably exist in a stationary-phase-like state, due to nutrient limitation in most environments. Studies on bacteria and yeast reveal morphological and physiological changes throughout the stationary phase, which lead to an increased ability to survive prolonged nutrient limitation. However, there is little information on archaeal stationary phase responses. We investigated protein- and lipid-level changes in Thermococcus kodakarensis with extended time in the stationary phase. Adaptations to time in stationary phase included increased proportion of membrane lipids with a tetraether backbone, synthesis of proteins that ensure translational fidelity, specific regulation of ABC transporters (upregulation of some, downregulation of others), and upregulation of proteins involved in coenzyme production. Given that the biological mechanism of tetraether synthesis is unknown, we also considered whether any of the protein-level changes in T. kodakarensis might shed light on the production of tetraether lipids across the same period. A putative carbon-nitrogen hydrolase, a TldE (a protease in Escherichia coli) homologue, and a membrane bound hydrogenase complex subunit were candidates for possible involvement in tetraether-related reactions, while upregulation of adenosylcobalamin synthesis proteins might lend support to a possible radical mechanism as a trigger for tetraether synthesis. PMID:27274708

The Proteome and Lipidome of Thermococcus kodakarensis across the Stationary Phase.

PubMed

Gagen, Emma J; Yoshinaga, Marcos Y; Garcia Prado, Franka; Hinrichs, Kai-Uwe; Thomm, Michael

2016-01-01

The majority of cells in nature probably exist in a stationary-phase-like state, due to nutrient limitation in most environments. Studies on bacteria and yeast reveal morphological and physiological changes throughout the stationary phase, which lead to an increased ability to survive prolonged nutrient limitation. However, there is little information on archaeal stationary phase responses. We investigated protein- and lipid-level changes in Thermococcus kodakarensis with extended time in the stationary phase. Adaptations to time in stationary phase included increased proportion of membrane lipids with a tetraether backbone, synthesis of proteins that ensure translational fidelity, specific regulation of ABC transporters (upregulation of some, downregulation of others), and upregulation of proteins involved in coenzyme production. Given that the biological mechanism of tetraether synthesis is unknown, we also considered whether any of the protein-level changes in T. kodakarensis might shed light on the production of tetraether lipids across the same period. A putative carbon-nitrogen hydrolase, a TldE (a protease in Escherichia coli) homologue, and a membrane bound hydrogenase complex subunit were candidates for possible involvement in tetraether-related reactions, while upregulation of adenosylcobalamin synthesis proteins might lend support to a possible radical mechanism as a trigger for tetraether synthesis.

Contribution of student involvement in production/service unit and experience of industry practices to entrepreneurial attitude and the impact entrepeneurship readiness of vocational high school students of great Malang

NASA Astrophysics Data System (ADS)

Mukminna, Halimahtus; Isnandar, Muladi

2017-09-01

Purpose of this research was to determine the contribution of student involvement in production/ service unit (X1), experience of industry practices (X2), and entrepreneurial attitude (Y) towards readiness entrepreneurship (Z) of vocational student regional Malang. The design of the study using a quantitative approach. The samples used as many as 130 respondents. Instruments used for collecting data in the form of questionnaires. Data analysis included descriptive and test of hypothesis. The result showed: that the description of data on the level of student involvement in production/ service unit, experience of industry practices, entrepreneurial attitude and entrepreneurship readiness in the high category. The contribution student involvement in production/ service unit of entrepreneurial attitude of 10.6%. The contribution experience of industry practices of entrepreneurial attitude of 17.4%. The contribution student involvement in production/ service unit and experience of industry practices simultaneously to entrepreneurial attitude of 44.1%. The contribution student involvement in production/ service unit of readiness entrepreneurship of 4%. The contribution experience of industry practices of readiness entrepreneurship of 5%. The contribution entrepreneurial attitude of readiness entrepreneurship of 16%. Finally, the contribution student involvement in production/ service unit, experience of industry practices, and entrepreneurial attitude simultaneously to readiness entrepreneurship of 50.3%.

Cultural change--empowerment at Sweetheart Cup Company, Inc., Bakery Division.

PubMed

Altomonte, W; Mooney, W; Sheldon, D H

1999-08-01

Sweetheart Cup Company always has been associated with fun products--fast food containers, straws, ballpark drink glasses, and maybe the most fun of all--ice cream cones! But making these products of pleasantry at times has not been as festive as it would seem. Sweetheart Cup Company has had its ups and downs in terms of many of the typical manufacturing measurements, but in 1994--under the direction of newly appointed Chief Operating Officer Bill McLaughlin--Sweetheart Cup Company embarked on a new mission. This time everyone would be involved, from headquarters staff in Owings Mills to the fourth-floor oven area workers in the Dallas bakery. The new process goal, "Business Excellence," as we called it, was really an implementation of Class A ERP/MRP II.

A Practical Framework Toward Prediction of Breaking Force and Disintegration of Tablet Formulations Using Machine Learning Tools.

PubMed

Akseli, Ilgaz; Xie, Jingjin; Schultz, Leon; Ladyzhynsky, Nadia; Bramante, Tommasina; He, Xiaorong; Deanne, Rich; Horspool, Keith R; Schwabe, Robert

2017-01-01

Enabling the paradigm of quality by design requires the ability to quantitatively correlate material properties and process variables to measureable product performance attributes. Conventional, quality-by-test methods for determining tablet breaking force and disintegration time usually involve destructive tests, which consume significant amount of time and labor and provide limited information. Recent advances in material characterization, statistical analysis, and machine learning have provided multiple tools that have the potential to develop nondestructive, fast, and accurate approaches in drug product development. In this work, a methodology to predict the breaking force and disintegration time of tablet formulations using nondestructive ultrasonics and machine learning tools was developed. The input variables to the model include intrinsic properties of formulation and extrinsic process variables influencing the tablet during manufacturing. The model has been applied to predict breaking force and disintegration time using small quantities of active pharmaceutical ingredient and prototype formulation designs. The novel approach presented is a step forward toward rational design of a robust drug product based on insight into the performance of common materials during formulation and process development. It may also help expedite drug product development timeline and reduce active pharmaceutical ingredient usage while improving efficiency of the overall process. Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Numerical models for afterburning of TNT detonation products in air

NASA Astrophysics Data System (ADS)

Donahue, L.; Zhang, F.; Ripley, R. C.

2013-11-01

Afterburning occurs when fuel-rich explosive detonation products react with oxygen in the surrounding atmosphere. This energy release can further contribute to the air blast, resulting in a more severe explosion hazard particularly in confined scenarios. The primary objective of this study was to investigate the influence of the products equation of state (EOS) on the prediction of the efficiency of trinitrotoluene (TNT) afterburning and the times of arrival of reverberating shock waves in a closed chamber. A new EOS is proposed, denoted the Afterburning (AB) EOS. This EOS employs the JWL EOS in the high pressure regime, transitioning to a Variable-Gamma (VG) EOS at lower pressures. Simulations of three TNT charges suspended in a explosion chamber were performed. When compared to numerical results using existing methods, it was determined that the Afterburning EOS delays the shock arrival times giving better agreement with the experimental measurements in the early to mid time. In the late time, the Afterburning EOS roughly halved the error between the experimental measurements and results obtained using existing methods. Use of the Afterburning EOS for products with the Variable-Gamma EOS for the surrounding air further significantly improved results, both in the transient solution and the quasi-static pressure. This final combination of EOS and mixture model is recommended for future studies involving afterburning explosives, particularly those in partial and full confinement.

Prevotella intermedia induces prostaglandin E2 via multiple signaling pathways.

PubMed

Guan, S-M; Fu, S-M; He, J-J; Zhang, M

2011-01-01

Prostaglandin E(2) (PGE(2)) plays important roles in the bone resorption of inflammatory diseases such as rheumatoid arthritis and periodontitis via specific prostaglandin receptors (i.e., EP1-EP4). In this study, the authors examined whether Prevotella intermedia regulates PGE(2) production and EP expression in human periodontal ligament fibroblasts (hPDLs); they also explored the potential signaling pathways involved in PGE(2) production. P. intermedia induced PGE(2) production and cyclooxygenase-2 (COX-2) expression in a dose- and time-dependent manner. Indomethacin and NS-398 completely abrogated the P. intermedia-induced PGE(2) production without modulating COX-2 expression. Specific inhibitors of extracellular signal-regulated kinase, c-Jun N-terminal kinase, p38, phosphatidylinositol 3-kinase, and protein kinase C--but not c-AMP and protein kinase A--significantly attenuated the P. intermedia-induced COX-2 and PGE(2) expression. P. intermedia reduced EP1 expression in a concentration- and time-dependent manner. The results indicate that the COX-2-dependent induction of PGE(2) by P. intermedia in hPDLs is mediated by multiple signaling pathways.

New data products available at the IRIS DMC

NASA Astrophysics Data System (ADS)

Trabant, C. M.; Bahavar, M.; Hutko, A.; Karstens, R.

2010-12-01

The research supported by the raw data from the observatories of NSF's EarthScope project are having tremendous impact on our understanding of the structure and geologic history of North America, how and why earthquakes occur and many other areas of modern geophysics. The IRIS Data Management Center (DMC) is the primary access point for EarthScope/USArray data and has embarked on a new effort to produce higher-level data products beyond raw time series in order to assist the community in extracting the highest value possible from these data. These new products will serve many purposes: stepping-stones for future research projects, data visualizations, research result comparisons and compilation of unique data sets as well as outreach material. To ensure community involvement in the development of new products the requirements and priorities are reviewed and approved by the IRIS Data Products Working Group (DPWG). Many new products are now available at the IRIS DMC. These include two event based products generated in near real time. 1) USArray Ground Motion Visualizations, routinely generated animations showing the both the vertical and horizontal seismic wavefields sweeping across the USArray Transportable Array from earthquakes around the world. 2) Event Plots, a suite of figures automatically generated following all M6.0+ events which include phase aligned record sections, global body wave envelope stacks, regional network vespagrams and source-time functions. 3) Earth Model Collaboration, a new web repository for community-supplied regional and global tomography models with the ability to preview, request and compare models. 4) EARS, the EarthScope Automated Receiver Survey, developed at the University of South Carolina, aims to calculate crustal thickness and bulk crustal properties beneath USArray stations as well as many other broadband stations whose data are archived at the IRIS DMC. 5) Archiving and distribution of Princeton 3D SEM and 1D synthetic seismograms generated for all Global CMT events. 6) Archiving and distribution of GPS displacement time series produced by the Plate Boundary Observatory. Other data products are under consideration and will be moved to the development pipeline once approved by the IRIS DPWG. Feedback on existing products and ideas for new products are welcome at any time.

Proteins involved in difference of sorbitol fermentation rates of the toxigenic and nontoxigenic Vibrio cholerae El Tor strains revealed by comparative proteome analysis

PubMed Central

2009-01-01

Background The nontoxigenic V. cholerae El Tor strains ferment sorbitol faster than the toxigenic strains, hence fast-fermenting and slow-fermenting strains are defined by sorbitol fermentation test. This test has been used for more than 40 years in cholera surveillance and strain analysis in China. Understanding of the mechanisms of sorbitol metabolism of the toxigenic and nontoxigenic strains may help to explore the genome and metabolism divergence in these strains. Here we used comparative proteomic analysis to find the proteins which may be involved in such metabolic difference. Results We found the production of formate and lactic acid in the sorbitol fermentation medium of the nontoxigenic strain was earlier than of the toxigenic strain. We compared the protein expression profiles of the toxigenic strain N16961 and nontoxigenic strain JS32 cultured in sorbitol fermentation medium, by using fructose fermentation medium as the control. Seventy-three differential protein spots were found and further identified by MALDI-MS. The difference of product of fructose-specific IIA/FPR component gene and mannitol-1-P dehydrogenase, may be involved in the difference of sorbitol transportation and dehydrogenation in the sorbitol fast- and slow-fermenting strains. The difference of the relative transcription levels of pyruvate formate-lyase to pyruvate dehydrogenase between the toxigenic and nontoxigenic strains may be also responsible for the time and ability difference of formate production between these strains. Conclusion Multiple factors involved in different metabolism steps may affect the sorbitol fermentation in the toxigenic and nontoxigenic strains of V. cholerae El Tor. PMID:19589152

Canine and feline blood transfusions: controversies and recent advances in administration practices.

PubMed

Kisielewicz, Caroline; Self, Ian A

2014-05-01

To discuss and review blood transfusion practices in dogs and cats including collection and storage of blood and administration of products. To report new developments, controversial practices, less conventional blood product administration techniques and where applicable, describe the relevance to anaesthetists and anaesthesia. PubMed and Google Scholar using dog, cat, blood transfusion, packed red blood cells and whole blood as keywords. Blood transfusions improve oxygen carrying capacity and the clinical signs of anaemia. However there are numerous potential risks and complications possible with transfusions, which may outweigh their benefits. Storage of blood products has improved considerably over time but whilst extended storage times may improve their availability, a phenomenon known as the storage lesion has been identified which affects erythrocyte viability and survival. Leukoreduction involves removing leukocytes and platelets thereby preventing their release of cytokines and bioactive compounds which also contribute to storage lesions and certain transfusion reactions. Newer transfusion techniques are being explored such as cell salvage in surgical patients and subsequent autologous transfusion. Xenotransfusions, using blood and blood products between different species, provide an alternative to conventional blood products. © 2014 Association of Veterinary Anaesthetists and the American College of Veterinary Anesthesia and Analgesia.

The impact of breast cancer among Canadian women: disability and productivity.

PubMed

Quinlan, Elizabeth; Thomas-MacLean, Roanne; Hack, Tom; Kwan, Winkle; Miedema, Baukje; Tatemichi, Sue; Towers, Anna; Tilley, Andrea

2009-01-01

Each year over 20,000 Canadian women are diagnosed with breast cancer. Many breast cancer survivors anticipate a considerable number of years of potential participation in the paid labour market, therefore, the link between breast cancer survivorship and productivity deserves serious consideration. The hypothesis guiding this study is that arm morbidities such as lymphedema, pain, and range of motion limitations are important explanatory variables in survivors' loss of productivity. The study draws from a larger longitudinal research project involving over 600 breast cancer survivors in four geographical locations across Canada. The study's regression results indicate that, after adjusting for fatigue, breast cancer stage, and geographical location, survivors with range of motion limitations and arm pain are more than two and half times as likely to lose some productivity capacity as compared to counterparts with no arm morbidity. The findings make a compelling argument for the necessity of adequate rehabilitation programs delivered at crucial times in breast cancer survivors' recovery. The study's unexpected finding that geographical location is a highly significant predictor of changes in productivity among breast cancer survivors is interpreted as a factor of the regulatory framework governing employment relationships in the four different jurisdictions.

The purchase decision process and involvement of the elderly regarding nonprescription products.

PubMed

Reisenwitz, T H; Wimbish, G J

1997-01-01

The elderly or senior citizen is a large and growing market segment that purchases a disproportionate amount of health care products, particularly nonprescription products. This study attempts to examine the elderly's level of involvement (high versus low) and their purchase decision process regarding nonprescription or over-the-counter (OTC) products. Frequencies and percentages are calculated to indicate level of involvement as well as purchase decision behavior. Previous research is critiqued and managerial implications are discussed.

Optimization of the extraction and purification of the compatible solute ectoine from Halomonas elongate in the laboratory experiment of a commercial production project.

PubMed

Chen, Ruifeng; Zhu, Lijun; Lv, Lihuo; Yao, Su; Li, Bin; Qian, Junqing

2017-06-01

Optimization of compatible solutes (ectoine) extraction and purification from Halomonas elongata cell fermentation had been investigated in the laboratory tests of a large scale commercial production project. After culturing H. elongata cells in developed medium at 28 °C for 23-30 h, we obtained an average yield and biomass of ectoine for 15.9 g/L and 92.9 (OD 600 ), respectively. Cell lysis was performed with acid treatment at moderate high temperature (60-70 °C). The downstream processing operations were designed to be as follows: filtration, desalination, cation exchange, extraction of crude product and three times of refining. Among which the cation exchange and extraction of crude product acquired a high average recovery rate of 95 and 96%; whereas a great loss rate of 19 and 15% was observed during the filtration and desalination, respectively. Combined with the recovering of ectoine from the mother liquor of the three times refining, the average of overall yield (referring to the amount of ectoine synthesized in cells) and purity of final product obtained were 43% and over 98%, respectively. However, key factors that affected the production efficiency were not yields but the time used in the extraction of crude product, involving the crystallization step from water, which spended 24-72 h according to the production scale. Although regarding to the productivity and simplicity on laboratory scale, the method described here can not compete with other investigations, in this study we acquired higher purity of ectoine and provided downstream processes that are capable of operating on industrial scale.

Efficient block preconditioned eigensolvers for linear response time-dependent density functional theory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vecharynski, Eugene; Brabec, Jiri; Shao, Meiyue

Within this paper, we present two efficient iterative algorithms for solving the linear response eigenvalue problem arising from the time dependent density functional theory. Although the matrix to be diagonalized is nonsymmetric, it has a special structure that can be exploited to save both memory and floating point operations. In particular, the nonsymmetric eigenvalue problem can be transformed into an eigenvalue problem that involves the product of two matrices M and K. We show that, because MK is self-adjoint with respect to the inner product induced by the matrix K, this product eigenvalue problem can be solved efficiently by amore » modified Davidson algorithm and a modified locally optimal block preconditioned conjugate gradient (LOBPCG) algorithm that make use of the K-inner product. Additionally, the solution of the product eigenvalue problem yields one component of the eigenvector associated with the original eigenvalue problem. We show that the other component of the eigenvector can be easily recovered in an inexpensive postprocessing procedure. As a result, the algorithms we present here become more efficient than existing methods that try to approximate both components of the eigenvectors simultaneously. In particular, our numerical experiments demonstrate that the new algorithms presented here consistently outperform the existing state-of-the-art Davidson type solvers by a factor of two in both solution time and storage.« less

Efficient block preconditioned eigensolvers for linear response time-dependent density functional theory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vecharynski, Eugene; Brabec, Jiri; Shao, Meiyue

In this article, we present two efficient iterative algorithms for solving the linear response eigenvalue problem arising from the time dependent density functional theory. Although the matrix to be diagonalized is nonsymmetric, it has a special structure that can be exploited to save both memory and floating point operations. In particular, the nonsymmetric eigenvalue problem can be transformed into an eigenvalue problem that involves the product of two matrices M and K. We show that, because MK is self-adjoint with respect to the inner product induced by the matrix K, this product eigenvalue problem can be solved efficiently by amore » modified Davidson algorithm and a modified locally optimal block preconditioned conjugate gradient (LOBPCG) algorithm that make use of the K-inner product. The solution of the product eigenvalue problem yields one component of the eigenvector associated with the original eigenvalue problem. We show that the other component of the eigenvector can be easily recovered in an inexpensive postprocessing procedure. As a result, the algorithms we present here become more efficient than existing methods that try to approximate both components of the eigenvectors simultaneously. In particular, our numerical experiments demonstrate that the new algorithms presented here consistently outperform the existing state-of-the-art Davidson type solvers by a factor of two in both solution time and storage.« less

Efficient block preconditioned eigensolvers for linear response time-dependent density functional theory

DOE PAGES

Vecharynski, Eugene; Brabec, Jiri; Shao, Meiyue; ...

2017-12-01

In this article, we present two efficient iterative algorithms for solving the linear response eigenvalue problem arising from the time dependent density functional theory. Although the matrix to be diagonalized is nonsymmetric, it has a special structure that can be exploited to save both memory and floating point operations. In particular, the nonsymmetric eigenvalue problem can be transformed into an eigenvalue problem that involves the product of two matrices M and K. We show that, because MK is self-adjoint with respect to the inner product induced by the matrix K, this product eigenvalue problem can be solved efficiently by amore » modified Davidson algorithm and a modified locally optimal block preconditioned conjugate gradient (LOBPCG) algorithm that make use of the K-inner product. The solution of the product eigenvalue problem yields one component of the eigenvector associated with the original eigenvalue problem. We show that the other component of the eigenvector can be easily recovered in an inexpensive postprocessing procedure. As a result, the algorithms we present here become more efficient than existing methods that try to approximate both components of the eigenvectors simultaneously. In particular, our numerical experiments demonstrate that the new algorithms presented here consistently outperform the existing state-of-the-art Davidson type solvers by a factor of two in both solution time and storage.« less

Efficient block preconditioned eigensolvers for linear response time-dependent density functional theory

DOE PAGES

Vecharynski, Eugene; Brabec, Jiri; Shao, Meiyue; ...

2017-08-24

Within this paper, we present two efficient iterative algorithms for solving the linear response eigenvalue problem arising from the time dependent density functional theory. Although the matrix to be diagonalized is nonsymmetric, it has a special structure that can be exploited to save both memory and floating point operations. In particular, the nonsymmetric eigenvalue problem can be transformed into an eigenvalue problem that involves the product of two matrices M and K. We show that, because MK is self-adjoint with respect to the inner product induced by the matrix K, this product eigenvalue problem can be solved efficiently by amore » modified Davidson algorithm and a modified locally optimal block preconditioned conjugate gradient (LOBPCG) algorithm that make use of the K-inner product. Additionally, the solution of the product eigenvalue problem yields one component of the eigenvector associated with the original eigenvalue problem. We show that the other component of the eigenvector can be easily recovered in an inexpensive postprocessing procedure. As a result, the algorithms we present here become more efficient than existing methods that try to approximate both components of the eigenvectors simultaneously. In particular, our numerical experiments demonstrate that the new algorithms presented here consistently outperform the existing state-of-the-art Davidson type solvers by a factor of two in both solution time and storage.« less

Active Involvement of End Users When Developing Web-Based Mental Health Interventions.

PubMed

de Beurs, Derek; van Bruinessen, Inge; Noordman, Janneke; Friele, Roland; van Dulmen, Sandra

2017-01-01

Although many web-based mental health interventions are being released, the actual uptake by end users is limited. The marginal level of engagement of end users when developing these interventions is recognized as an important cause for uptake problems. In this paper, we offer our perceptive on how to improve user engagement. By doing so, we aim to stimulate a discourse on user involvement within the field of online mental health interventions. We shortly describe three different methods (the expert-driven method, intervention mapping, and scrum) that were currently used to develop web-based health interventions. We will focus to what extent the end user was involved in the developmental phase, and what the additional challenges were. In the final paragraph, lessons learned are summarized, and recommendations provided. Every method seems to have its trade-off: if end users are highly involved, availability of end users and means become problematic. If end users are less actively involved, the product may be less appropriate for the end user. Other challenges to consider are the funding of the more active role of technological companies, and the time it takes to process the results of shorter development cycles. Thinking about user-centered design and carefully planning, the involvement of end users should become standard in the field of web-based (mental) health. When deciding on the level of user involvement, one should balance the need for input from users with the availability of resources such as time and funding.

Ionizing radiation accelerates Drp1-dependent mitochondrial fission, which involves delayed mitochondrial reactive oxygen species production in normal human fibroblast-like cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kobashigawa, Shinko, E-mail: kobashin@nagasaki-u.ac.jp; Suzuki, Keiji; Yamashita, Shunichi

2011-11-04

Highlights: Black-Right-Pointing-Pointer We report first time that ionizing radiation induces mitochondrial dynamic changes. Black-Right-Pointing-Pointer Radiation-induced mitochondrial fission was caused by Drp1 localization. Black-Right-Pointing-Pointer We found that radiation causes delayed ROS from mitochondria. Black-Right-Pointing-Pointer Down regulation of Drp1 rescued mitochondrial dysfunction after radiation exposure. -- Abstract: Ionizing radiation is known to increase intracellular level of reactive oxygen species (ROS) through mitochondrial dysfunction. Although it has been as a basis of radiation-induced genetic instability, the mechanism involving mitochondrial dysfunction remains unclear. Here we studied the dynamics of mitochondrial structure in normal human fibroblast like cells exposed to ionizing radiation. Delayed mitochondrial O{submore » 2}{sup {center_dot}-} production was peaked 3 days after irradiation, which was coupled with accelerated mitochondrial fission. We found that radiation exposure accumulated dynamin-related protein 1 (Drp1) to mitochondria. Knocking down of Drp1 expression prevented radiation induced acceleration of mitochondrial fission. Furthermore, knockdown of Drp1 significantly suppressed delayed production of mitochondrial O{sub 2}{sup {center_dot}-}. Since the loss of mitochondrial membrane potential, which was induced by radiation was prevented in cells knocking down of Drp1 expression, indicating that the excessive mitochondrial fission was involved in delayed mitochondrial dysfunction after irradiation.« less

An Optimization of Manufacturing Systems using a Feedback Control Scheduling Model

NASA Astrophysics Data System (ADS)

Ikome, John M.; Kanakana, Grace M.

2018-03-01

In complex production system that involves multiple process, unplanned disruption often turn to make the entire production system vulnerable to a number of problems which leads to customer’s dissatisfaction. However, this problem has been an ongoing problem that requires a research and methods to streamline the entire process or develop a model that will address it, in contrast to this, we have developed a feedback scheduling model that can minimize some of this problem and after a number of experiment, it shows that some of this problems can be eliminated if the correct remedial actions are implemented on time.

Pulse-Flow Microencapsulation System

NASA Technical Reports Server (NTRS)

Morrison, Dennis R.

2006-01-01

The pulse-flow microencapsulation system (PFMS) is an automated system that continuously produces a stream of liquid-filled microcapsules for delivery of therapeutic agents to target tissues. Prior microencapsulation systems have relied on batch processes that involve transfer of batches between different apparatuses for different stages of production followed by sampling for acquisition of quality-control data, including measurements of size. In contrast, the PFMS is a single, microprocessor-controlled system that performs all processing steps, including acquisition of quality-control data. The quality-control data can be used as real-time feedback to ensure the production of large quantities of uniform microcapsules.

Paths towards Family‐friendly Working Time Arrangements: Comparing Workplaces in Different Countries and Industries

PubMed Central

2016-01-01

Abstract Although studies have examined the distribution and conditions of employer‐provided work–family arrangements, we still lack a systematic investigation of how these vary for different countries and industries. Based on the European Working Conditions Survey 2010, this study examines the conditions under which firms provide family‐friendly working time arrangements and what the differences are across four countries (Austria, Denmark, Italy and the UK) and four industries. The impact of employee representatives, employee involvement, manager support and female managers varies across countries and industries because of the institutional environment (prevailing family model, industrial relations) and workforce composition (gender). The impact of employee representatives depends on their co‐determination rights, and the direction of their effect on the prevailing family model (e.g. negative in conservative countries such as Austria) and the gender composition of the workforce (negative in male‐dominated production, but positive in services). Employee involvement in the work organization is significantly positive in Austria and Denmark (both with co‐operative industrial relations), while manager support has the strongest effect in the UK (liberal regime). At the industry level, female supervisors are positively associated with family‐friendly working time arrangements only in the male‐dominated production industry. These findings suggest that the effects of agency variables and their direction vary depending on the institutional context. PMID:29242672

Impact of Auditory Context on Executed Motor Actions

PubMed Central

Yoles-Frenkel, Michal; Avron, Maayan; Prut, Yifat

2016-01-01

The auditory and motor systems are strongly coupled, as is evident in the specifically tight motor synchronization that occurs in response to regularly occurring auditory cues compared with cues of other modalities. Timing of rhythmic action is known to rely on multiple neural centers including the cerebellum and the basal-ganglia which have access to both motor cortical and spinal circuitries. To date, however, there is little information on the motor mechanisms that operate during preparation and execution of rhythmic vs. non-rhythmic movements. We measured acceleration profile and muscle activity while subjects performed tapping movements in response to auditory cues. We found that when tapping at random intervals there was a higher variability of both acceleration profile and muscle activity during motor preparation compared to rhythmic tapping. However, the specific rhythmic context (cued, self-paced, or syncopation) did not affect the motor parameters of the executed taps. Finally, during entrainment we found a gradual as opposed to episodic change in low-level motor parameters (i.e., preparatory muscle activity) that was strongly correlated with changes in high-level parameters (i.e., shift in the reaction time to negative asynchrony). These findings suggest that motor entrainment involves not only adjusting the timing of movement but also modifying parameters that are related to its production. These changes in motor output were insensitive to the specifics of the rhythmic cue: although it took subjects different times to become entrained to different types of rhythmic cues, the motor actions produced once entrainment was obtained were indistinguishable. These findings suggest that motor entrainment involves not only adjusting the timing of movement but also modifying parameters related to its production. The reduced variability of muscle activity during the preparatory period could be one mechanism used by the motor system to enhance the accuracy of motor timing. PMID:26834584

The Determination of Metals in Welding Fume by X-RaySpectrometry

NASA Astrophysics Data System (ADS)

Kuznetsova, O. V.; Begunova, L. A.; Romanenko, S. V.; Solodsky, S. A.

2018-01-01

Analysis of the current hygienic situation in the welding production showed that the intensification of welding processes involves the deterioration of air quality, which negatively affects the welders health. Respiratory effects seen in full-time welders have included bronchitis, airway irritation, lung function changes, and a possible increase in the incidence of lung cancer. The metal concentration in the air of the working area have been determined using the photometric method of analysis, which involves the stage of decomposition of the sample material before analysis. However, losses of the analyzed elements are possible when the sample is decomposed. The X-ray fluorescence method of analysis has the advantage of being nondestructive. The investigations shown the data of photometric determination of metals in welding aerosols is 1.5÷2 times lower than the results of X-ray fluorescence analysis.

Neural signatures of response planning occur midway through an incoming question in conversation

PubMed Central

Bögels, Sara; Magyari, Lilla; Levinson, Stephen C.

2015-01-01

A striking puzzle about language use in everyday conversation is that turn-taking latencies are usually very short, whereas planning language production takes much longer. This implies overlap between language comprehension and production processes, but the nature and extent of such overlap has never been studied directly. Combining an interactive quiz paradigm with EEG measurements in an innovative way, we show that production planning processes start as soon as possible, that is, within half a second after the answer to a question can be retrieved (up to several seconds before the end of the question). Localization of ERP data shows early activation even of brain areas related to late stages of production planning (e.g., syllabification). Finally, oscillation results suggest an attention switch from comprehension to production around the same time frame. This perspective from interactive language use throws new light on the performance characteristics that language competence involves. PMID:26242909

Improvement of Biogas Production by Bioaugmentation

PubMed Central

Kovács, K. L.; Ács, N.; Kovács, E.; Wirth, R.; Rákhely, G.; Strang, Orsolya; Herbel, Zsófia; Bagi, Z.

2013-01-01

Biogas production technologies commonly involve the use of natural anaerobic consortia of microbes. The objective of this study was to elucidate the importance of hydrogen in this complex microbial food chain. Novel laboratory biogas reactor prototypes were designed and constructed. The fates of pure hydrogen-producing cultures of Caldicellulosiruptor saccharolyticus and Enterobacter cloacae were followed in time in thermophilic and mesophilic natural biogas-producing communities, respectively. Molecular biological techniques were applied to study the altered ecosystems. A systematic study in 5-litre CSTR digesters revealed that a key fermentation parameter in the maintenance of an altered population balance is the loading rate of total organic solids. Intensification of the biogas production was observed and the results corroborate that the enhanced biogas productivity is associated with the increased abundance of the hydrogen producers. Fermentation parameters did not indicate signs of failure in the biogas production process. Rational construction of more efficient and sustainable biogas-producing microbial consortia is proposed. PMID:23484123

The complex dynamics of products and its asymptotic properties

PubMed Central

Cristelli, Matthieu; Zaccaria, Andrea; Pietronero, Luciano

2017-01-01

We analyse global export data within the Economic Complexity framework. We couple the new economic dimension Complexity, which captures how sophisticated products are, with an index called logPRODY, a measure of the income of the respective exporters. Products’ aggregate motion is treated as a 2-dimensional dynamical system in the Complexity-logPRODY plane. We find that this motion can be explained by a quantitative model involving the competition on the markets, that can be mapped as a scalar field on the Complexity-logPRODY plane and acts in a way akin to a potential. This explains the movement of products towards areas of the plane in which the competition is higher. We analyse market composition in more detail, finding that for most products it tends, over time, to a characteristic configuration, which depends on the Complexity of the products. This market configuration, which we called asymptotic, is characterized by higher levels of competition. PMID:28520794

Natural Products and Supplements for Geriatric Depression and Cognitive Disorders: An Evaluation of the Research

PubMed Central

Varteresian, Taya; Lavretsky, Helen

2014-01-01

Numerous geriatric patients are using Complementary and Alternative Medicine (CAM) for late-life mood and cognitive disorders. Natural products and supplements are a common CAM intervention which have risks and benefits of which patients should be appropriately advised. The data for omega-3 fatty acids, ginkgo biloba, SAMe, St John’s wort, B Vitamins and Vitamin D, huperzine, caprylidene and coconut oil will be evaluated. Since the evidence basis for natural products and supplements is limited, especially for the geriatric population. Studies involving the general adult population are included to infer effects in the aging population. Despite the data available, more rigorous studies with larger sample sizes over longer periods of time are still needed. Regardless of a physician’s preference to recommend various natural supplements and products, a physician could protect their patients by having an understanding of the side effects and indications for various natural products. PMID:24912606

29 CFR 570.64 - Occupations involved in the manufacture of brick, tile, and kindred products (Order 13).

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Occupations involved in the manufacture of brick, tile, and... Detrimental to Their Health or Well-Being § 570.64 Occupations involved in the manufacture of brick, tile, and... term clay construction products shall mean the following clay products: Brick, hollow structural tile...

29 CFR 570.64 - Occupations involved in the manufacture of brick, tile, and kindred products (Order 13).

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 3 2013-07-01 2013-07-01 false Occupations involved in the manufacture of brick, tile, and... Detrimental to Their Health or Well-Being § 570.64 Occupations involved in the manufacture of brick, tile, and... term clay construction products shall mean the following clay products: Brick, hollow structural tile...

29 CFR 570.64 - Occupations involved in the manufacture of brick, tile, and kindred products (Order 13).

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 3 2012-07-01 2012-07-01 false Occupations involved in the manufacture of brick, tile, and... Detrimental to Their Health or Well-Being § 570.64 Occupations involved in the manufacture of brick, tile, and... term clay construction products shall mean the following clay products: Brick, hollow structural tile...

29 CFR 570.64 - Occupations involved in the manufacture of brick, tile, and kindred products (Order 13).

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false Occupations involved in the manufacture of brick, tile, and... Detrimental to Their Health or Well-Being § 570.64 Occupations involved in the manufacture of brick, tile, and... term clay construction products shall mean the following clay products: Brick, hollow structural tile...

29 CFR 570.64 - Occupations involved in the manufacture of brick, tile, and kindred products (Order 13).

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Occupations involved in the manufacture of brick, tile, and... Detrimental to Their Health or Well-Being § 570.64 Occupations involved in the manufacture of brick, tile, and... term clay construction products shall mean the following clay products: Brick, hollow structural tile...

Responses to hyperthermia. Optimizing heat dissipation by convection and evaporation: Neural control of skin blood flow and sweating in humans.

PubMed

Smith, Caroline J; Johnson, John M

2016-04-01

Under normothermic, resting conditions, humans dissipate heat from the body at a rate approximately equal to heat production. Small discrepancies between heat production and heat elimination would, over time, lead to significant changes in heat storage and body temperature. When heat production or environmental temperature is high the challenge of maintaining heat balance is much greater. This matching of heat elimination with heat production is a function of the skin circulation facilitating heat transport to the body surface and sweating, enabling evaporative heat loss. These processes are manifestations of the autonomic control of cutaneous vasomotor and sudomotor functions and form the basis of this review. We focus on these systems in the responses to hyperthermia. In particular, the cutaneous vascular responses to heat stress and the current understanding of the neurovascular mechanisms involved. The available research regarding cutaneous active vasodilation and vasoconstriction is highlighted, with emphasis on active vasodilation as a major responder to heat stress. Involvement of the vasoconstrictor and active vasodilator controls of the skin circulation in the context of heat stress and nonthermoregulatory reflexes (blood pressure, exercise) are also considered. Autonomic involvement in the cutaneous vascular responses to direct heating and cooling of the skin are also discussed. We examine the autonomic control of sweating, including cholinergic and noncholinergic mechanisms, the local control of sweating, thermoregulatory and nonthermoregulatory reflex control and the possible relationship between sudomotor and cutaneous vasodilator function. Finally, we comment on the clinical relevance of these control schemes in conditions of autonomic dysfunction. Copyright © 2016 Elsevier B.V. All rights reserved.

What contributes to a technical purchasing decision maker's reliance on brand name for design decisions involving I&T products

NASA Astrophysics Data System (ADS)

Coutoumanos, Vincent

The following research is intended to develop more formal mechanisms for collection, analysis, retention and dissemination of information relating to brand influence on high-technology products. Specifically, these high-technology products are associated with the engineering applications that likely would involve the loss of human life in the advent of catastrophic failure. The results of the study lead to an extension of theory involving marketing and product selection of "highly engineered" parts within the aerospace industry. The findings were separated into three distinct areas: 1) Information load will play a large role in the final design decision. If the designer is under a high level of information load during the time of a design decision, he or she likely will gravitate to the traditional design choice, regardless of the level of brand strength. 2) Even when strong brand names, like 3M, were offered as the non-traditional design choice, engineers gravitated to the traditional design choice that was presented in a mock Society for Manufacturing Engineers article. 3) Designer self-efficacy by itself will not often contribute to a decision maker's design choice. However, these data collected indicates that a combination of high designer self-efficacy moderated by high brand strength is likely to contribute significantly to a decision maker's decision. The post-hoc finding shows that many designers having high levels of self-efficacy could be developing a sense of comfort with strong brand names (like 3M) when making a design choice.

Ejection of Coulomb Crystals from a Linear Paul Ion Trap for Ion-Molecule Reaction Studies.

PubMed

Meyer, K A E; Pollum, L L; Petralia, L S; Tauschinsky, A; Rennick, C J; Softley, T P; Heazlewood, B R

2015-12-17

Coulomb crystals are being increasingly employed as a highly localized source of cold ions for the study of ion-molecule chemical reactions. To extend the scope of reactions that can be studied in Coulomb crystals-from simple reactions involving laser-cooled atomic ions, to more complex systems where molecular reactants give rise to multiple product channels-sensitive product detection methodologies are required. The use of a digital ion trap (DIT) and a new damped cosine trap (DCT) are described, which facilitate the ejection of Coulomb-crystallized ions onto an external detector for the recording of time-of-flight (TOF) mass spectra. This enables the examination of reaction dynamics and kinetics between Coulomb-crystallized ions and neutral molecules: ionic products are typically cotrapped, thus ejecting the crystal onto an external detector reveals the masses, identities, and quantities of all ionic species at a selected point in the reaction. Two reaction systems are examined: the reaction of Ca(+) with deuterated isotopologues of water, and the charge exchange between cotrapped Xe(+) with deuterated isotopologues of ammonia. These reactions are examples of two distinct types of experiment, the first involving direct reaction of the laser-cooled ions, and the second involving reaction of sympathetically-cooled heavy ions to form a mixture of light product ions. Extensive simulations are conducted to interpret experimental results and calculate optimal operating parameters, facilitating a comparison between the DIT and DCT approaches. The simulations also demonstrate a correlation between crystal shape and image shape on the detector, suggesting a possible means for determining crystal geometry for nonfluorescing ions.

Lovastatin in Aspergillus terreus: fermented rice straw extracts interferes with methane production and gene expression in Methanobrevibacter smithii.

PubMed

Faseleh Jahromi, Mohammad; Liang, Juan Boo; Ho, Yin Wan; Mohamad, Rosfarizan; Goh, Yong Meng; Shokryazdan, Parisa; Chin, James

2013-01-01

Lovastatin, a natural byproduct of some fungi, is able to inhibit HMG-CoA (3-hydroxy-3 methyl glutaryl CoA) reductase. This is a key enzyme involved in isoprenoid synthesis and essential for cell membrane formation in methanogenic Archaea. In this paper, experiments were designed to test the hypothesis that lovastatin secreted by Aspergillus terreus in fermented rice straw extracts (FRSE) can inhibit growth and CH4 production in Methanobrevibacter smithii (a test methanogen). By HPLC analysis, 75% of the total lovastatin in FRSE was in the active hydroxyacid form, and in vitro studies confirmed that this had a stronger effect in reducing both growth and CH4 production in M. smithii compared to commercial lovastatin. Transmission electron micrographs revealed distorted morphological divisions of lovastatin- and FRSE-treated M. smithii cells, supporting its role in blocking normal cell membrane synthesis. Real-time PCR confirmed that both commercial lovastatin and FRSE increased (P < 0.01) the expression of HMG-CoA reductase gene (hmg). In addition, expressions of other gene transcripts in M. smithii. with a key involvement in methanogenesis were also affected. Experimental confirmation that CH4 production is inhibited by lovastatin in A. terreus-fermented rice straw paves the way for its evaluation as a feed additive for mitigating CH4 production in ruminants.

Lovastatin in Aspergillus terreus: Fermented Rice Straw Extracts Interferes with Methane Production and Gene Expression in Methanobrevibacter smithii

PubMed Central

Liang, Juan Boo; Ho, Yin Wan; Mohamad, Rosfarizan; Goh, Yong Meng; Shokryazdan, Parisa; Chin, James

2013-01-01

Lovastatin, a natural byproduct of some fungi, is able to inhibit HMG-CoA (3-hydroxy-3methyl glutaryl CoA) reductase. This is a key enzyme involved in isoprenoid synthesis and essential for cell membrane formation in methanogenic Archaea. In this paper, experiments were designed to test the hypothesis that lovastatin secreted by Aspergillus terreus in fermented rice straw extracts (FRSE) can inhibit growth and CH4 production in Methanobrevibacter smithii (a test methanogen). By HPLC analysis, 75% of the total lovastatin in FRSE was in the active hydroxyacid form, and in vitro studies confirmed that this had a stronger effect in reducing both growth and CH4 production in M. smithii compared to commercial lovastatin. Transmission electron micrographs revealed distorted morphological divisions of lovastatin- and FRSE-treated M. smithii cells, supporting its role in blocking normal cell membrane synthesis. Real-time PCR confirmed that both commercial lovastatin and FRSE increased (P < 0.01) the expression of HMG-CoA reductase gene (hmg). In addition, expressions of other gene transcripts in M. smithii. with a key involvement in methanogenesis were also affected. Experimental confirmation that CH4 production is inhibited by lovastatin in A. terreus-fermented rice straw paves the way for its evaluation as a feed additive for mitigating CH4 production in ruminants. PMID:23710454

Comprehensive modeling study of ozonolysis of oleic acid aerosol based on real-time, online measurements of aerosol composition

NASA Astrophysics Data System (ADS)

Gallimore, P. J.; Griffiths, P. T.; Pope, F. D.; Reid, J. P.; Kalberer, M.

2017-04-01

The chemical composition of organic aerosols profoundly influences their atmospheric properties, but a detailed understanding of heterogeneous and in-particle reactivity is lacking. We present here a combined experimental and modeling study of the ozonolysis of oleic acid particles. An online mass spectrometry (MS) method, Extractive Electrospray Ionization (EESI), is used to follow the composition of the aerosol at a molecular level in real time; relative changes in the concentrations of both reactants and products are determined during aerosol aging. The results show evidence for multiple non-first-order reactions involving stabilized Criegee intermediates, including the formation of secondary ozonides and other oligomers. Offline liquid chromatography MS is used to confirm the online MS assignment of the monomeric and dimeric products. We explain the observed EESI-MS chemical composition changes, and chemical and physical data from previous studies, using a process-based aerosol chemistry simulation, the Pretty Good Aerosol Model (PG-AM). In particular, we extend previous studies of reactant loss by demonstrating success in reproducing the time dependence of product formation and the evolving particle size. This advance requires a comprehensive chemical scheme coupled to the partitioning of semivolatile products; relevant reaction and evaporation parameters have been refined using our new measurements in combination with PG-AM.

Evaluating the Productive Ward at an acute NHS trust: experiences and implications of releasing time to care.

PubMed

Wright, Stella; McSherry, Wilfred

2014-07-01

To demonstrate how a national programme aimed to increase the amount of direct time nurses spend with patients', impacts on both staff and patient experience. The Productive Ward is an improvement programme developed by the NHS Institute for Innovation and Improvement (2007, http://www.institute.nhs.uk/quality_and_value/productivity_series/productive_ward.html) which aims to enable nurses to work more efficiently by reviewing process and practice, thus releasing more time to spend on direct patient care. However, there is little empirical published research around the programme, particularly concerning impact, sustainability and the patient perspective. This manuscript presents the findings from qualitative interviews involving both staff and patients. Semi-structured one-to-one interviews were conducted with patients (n = 8) and staff (n = 5) on five case study wards. Seven focus groups were held according to staff grade (n = 29). Despite initial scepticism, most staff embraced the opportunity and demonstrated genuine enthusiasm and energy for the programme. Patients were generally complimentary about their experience as an inpatient, reporting that staff made them feel safe, comfortable and cared for. Findings showed that the aims of the programme were partially met. The implementation of Productive Ward was associated with significant changes to the ward environment and improvements for staff. The programme equipped staff with skills and knowledge which acted as a primer for subsequent interventions. However, there was a lack of evidence to demonstrate that Productive Ward released time for direct patient care in all areas that implemented the programme. Developing robust performance indicators including a system to capture reinvestment of direct care time would enable frontline staff to demonstrate impact of the programme. Additionally, staff will need to ensure that reorganisation and instability across the NHS do not affect sustainability and viability of the Productive Ward in the long term. © 2013 John Wiley & Sons Ltd.

Enzyme inhibition studies by integrated Michaelis-Menten equation considering simultaneous presence of two inhibitors when one of them is a reaction product.

PubMed

Bezerra, Rui M F; Pinto, Paula A; Fraga, Irene; Dias, Albino A

2016-03-01

To determine initial velocities of enzyme catalyzed reactions without theoretical errors it is necessary to consider the use of the integrated Michaelis-Menten equation. When the reaction product is an inhibitor, this approach is particularly important. Nevertheless, kinetic studies usually involved the evaluation of other inhibitors beyond the reaction product. The occurrence of these situations emphasizes the importance of extending the integrated Michaelis-Menten equation, assuming the simultaneous presence of more than one inhibitor because reaction product is always present. This methodology is illustrated with the reaction catalyzed by alkaline phosphatase inhibited by phosphate (reaction product, inhibitor 1) and urea (inhibitor 2). The approach is explained in a step by step manner using an Excel spreadsheet (available as a template in Appendix). Curve fitting by nonlinear regression was performed with the Solver add-in (Microsoft Office Excel). Discrimination of the kinetic models was carried out based on Akaike information criterion. This work presents a methodology that can be used to develop an automated process, to discriminate in real time the inhibition type and kinetic constants as data (product vs. time) are achieved by the spectrophotometer. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Genetic analysis of biosurfactant production in Ustilago maydis.

PubMed

Hewald, Sandra; Josephs, Katharina; Bölker, Michael

2005-06-01

The dimorphic basidiomycete Ustilago maydis produces large amounts of surface-active compounds under conditions of nitrogen starvation. These biosurfactants consist of derivatives of two classes of amphipathic glycolipids. Ustilagic acids are cellobiose lipids in which the disaccharide is O-glycosidically linked to 15,16-dihydroxyhexadecanoic acid. Ustilipids are mannosylerythritol lipids derived from acylated beta-d-mannopyranosyl-d-erythritol. Whereas the chemical structure of these biosurfactants has been determined, the genetic basis for their biosynthesis and regulation is largely unknown. Here we report the first identification of two genes, emt1 and cyp1, that are essential for the production of fungal extracellular glycolipids. emt1 is required for mannosylerythritol lipid production and codes for a protein with similarity to prokaryotic glycosyltransferases involved in the biosynthesis of macrolide antibiotics. We suggest that Emt1 catalyzes the synthesis of mannosyl-d-erythritol by transfer of GDP-mannose. Deletion of the gene cyp1 resulted in complete loss of ustilagic acid production. Cyp1 encodes a cytochrome P450 monooxygenase which is highly related to a family of plant fatty acid hydroxylases. Therefore we assume that Cyp1 is directly involved in the biosynthesis of the unusual 15,16-dihydroxyhexadecanoic acid. We could show that mannosylerythritol lipid production is responsible for hemolytic activity on blood agar, whereas ustilagic acid secretion is required for long-range pheromone recognition. The mutants described here allow for the first time a genetic analysis of glycolipid production in fungi.

Genetic Analysis of Biosurfactant Production in Ustilago maydis

PubMed Central

Hewald, Sandra; Josephs, Katharina; Bölker, Michael

2005-01-01

The dimorphic basidiomycete Ustilago maydis produces large amounts of surface-active compounds under conditions of nitrogen starvation. These biosurfactants consist of derivatives of two classes of amphipathic glycolipids. Ustilagic acids are cellobiose lipids in which the disaccharide is O-glycosidically linked to 15,16-dihydroxyhexadecanoic acid. Ustilipids are mannosylerythritol lipids derived from acylated β-d-mannopyranosyl-d-erythritol. Whereas the chemical structure of these biosurfactants has been determined, the genetic basis for their biosynthesis and regulation is largely unknown. Here we report the first identification of two genes, emt1 and cyp1, that are essential for the production of fungal extracellular glycolipids. emt1 is required for mannosylerythritol lipid production and codes for a protein with similarity to prokaryotic glycosyltransferases involved in the biosynthesis of macrolide antibiotics. We suggest that Emt1 catalyzes the synthesis of mannosyl-d-erythritol by transfer of GDP-mannose. Deletion of the gene cyp1 resulted in complete loss of ustilagic acid production. Cyp1 encodes a cytochrome P450 monooxygenase which is highly related to a family of plant fatty acid hydroxylases. Therefore we assume that Cyp1 is directly involved in the biosynthesis of the unusual 15,16-dihydroxyhexadecanoic acid. We could show that mannosylerythritol lipid production is responsible for hemolytic activity on blood agar, whereas ustilagic acid secretion is required for long-range pheromone recognition. The mutants described here allow for the first time a genetic analysis of glycolipid production in fungi. PMID:15932999

A Web-Based Common Framework to Support the Test and Evaluation Process Any Time, Anywhere, and Anyhow

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schur, Anne; Brown, James C.; Eaton, Sharon L.

Test and evaluation (T and E) is an enterprise. For any product, large or small, performance data is desired on many aspects to evaluate the product?s effectiveness for the intended users. Representing the many T and E facets without bewildering the user is challenging when there is a range of people, from the system developers to the manager of the organization, that want specific feedback. A web-based One-Stop Evaluation Center was created to meet these needs for a particular project. The evaluation center is usable at any time in the systems development lifecycle and streamlines the T and E enterprise.more » This paper discusses a common framework that unifies the T and E process with many stakeholders involved and is flexible to accommodate each stakeholders?specific evaluative processes and content. Our success has translated to many cost savings by enabling quick responses to change and a better line of communication between the users, developers, and managers.« less

Ganoderma lucidum targeting lung cancer signaling: A review.

PubMed

Gill, Balraj Singh; Navgeet; Kumar, Sanjeev

2017-06-01

Lung cancer causes huge mortality to population, and pharmaceutical companies require new drugs as an alternative either synthetic or natural targeting lung cancer. The conventional therapies cause side effects, and therefore, natural products are used as a therapeutic candidate in lung cancer. Chemical diversity among natural products highlights the impact of evolution and survival of fittest. One such neglected natural product is Ganoderma lucidum used for promoting health and longevity for a longer time. The major bioconstituents of G. lucidum are mainly terpenes, polysaccharides, and proteins, which were explored for various activities ranging from apoptosis to autophagy. The bioconstituents of G. lucidum activate plasma membrane receptors and initiate various downstream signaling leading to nuclear factor-κB, phosphoinositide 3-kinase, Akt, and mammalian target of rapamycin in cancer. The bioconstituents regulate the expression of various genes involved in cell cycle, immune response, apoptosis, and autophagy in lung cancer. This review highlights the inextricable role of G. lucidum and its bioconstituents in lung cancer signaling for the first time.

Estimating costs and performance of systems for machine processing of remotely sensed data

NASA Technical Reports Server (NTRS)

Ballard, R. J.; Eastwood, L. F., Jr.

1977-01-01

This paper outlines a method for estimating computer processing times and costs incurred in producing information products from digital remotely sensed data. The method accounts for both computation and overhead, and may be applied to any serial computer. The method is applied to estimate the cost and computer time involved in producing Level II Land Use and Vegetative Cover Maps for a five-state midwestern region. The results show that the amount of data to be processed overloads some example computer systems, but that the processing is feasible on others.

Frequency and time resolved measurements at rotating ring-disk electrodes for studying localized corrosion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huet, F.; Keddam, M.; Takenouti, H.

1993-07-01

By conferring frequency and time resolution on the rotating rink-disk electrode technique, original information can be obtained on the mechanism of corrosion processes involving the formation of intermediate, passive, or corrosion product layers. The methodology that allows the measurement of the actual flux of chemical species generated by a localized corrosion site is described which takes into account the usual parameters of the RRDE and the location of the active spot on the disk surface. Application to pitting corrosion of iron by Cl[sup [minus

Maximum principle for a stochastic delayed system involving terminal state constraints.

PubMed

Wen, Jiaqiang; Shi, Yufeng

2017-01-01

We investigate a stochastic optimal control problem where the controlled system is depicted as a stochastic differential delayed equation; however, at the terminal time, the state is constrained in a convex set. We firstly introduce an equivalent backward delayed system depicted as a time-delayed backward stochastic differential equation. Then a stochastic maximum principle is obtained by virtue of Ekeland's variational principle. Finally, applications to a state constrained stochastic delayed linear-quadratic control model and a production-consumption choice problem are studied to illustrate the main obtained result.

Optimizing a multi-product closed-loop supply chain using NSGA-II, MOSA, and MOPSO meta-heuristic algorithms

NASA Astrophysics Data System (ADS)

Babaveisi, Vahid; Paydar, Mohammad Mahdi; Safaei, Abdul Sattar

2018-07-01

This study aims to discuss the solution methodology for a closed-loop supply chain (CLSC) network that includes the collection of used products as well as distribution of the new products. This supply chain is presented on behalf of the problems that can be solved by the proposed meta-heuristic algorithms. A mathematical model is designed for a CLSC that involves three objective functions of maximizing the profit, minimizing the total risk and shortages of products. Since three objective functions are considered, a multi-objective solution methodology can be advantageous. Therefore, several approaches have been studied and an NSGA-II algorithm is first utilized, and then the results are validated using an MOSA and MOPSO algorithms. Priority-based encoding, which is used in all the algorithms, is the core of the solution computations. To compare the performance of the meta-heuristics, random numerical instances are evaluated by four criteria involving mean ideal distance, spread of non-dominance solution, the number of Pareto solutions, and CPU time. In order to enhance the performance of the algorithms, Taguchi method is used for parameter tuning. Finally, sensitivity analyses are performed and the computational results are presented based on the sensitivity analyses in parameter tuning.

Cathepsin B plays a key role in optimal production of the influenza A virus.

PubMed

Coleman, Macon D; Ha, Soon-Duck; Haeryfar, S M Mansour; Barr, Stephen Dominic; Kim, Sung Ouk

2018-01-01

Influenza A virus (IAV) is the etiologic agent of the febrile respiratory illness, commonly referred to as 'flu'. The lysosomal protease cathepsin B (CTSB) has shown to be involved in the lifecycle of various viruses. Here, we examined the role of CTSB in the IAV lifecycle. CTSB-deficient (CTSB -/- ) macrophages and the human lung epithelial cell line A549 cells treated with CA-074Me were infected with the A/Puerto Rico/8/34 strain of IAV (IAV-PR8). Viral entry and propagation were measured through quantitative real-time RT-PCR; production and localization of hemagglutinin (HA) protein in the infected host cells were analysed by Western blots, flow cytometry and confocal microscopy; production of progeny viruses were measured by a hemagglutination assay. CTSB -/- macrophages and CA-074Me-treated A549 cells had no defects in incorporating IAV-PR8 virions and permitting viral RNA synthesis. However, these cells produced significantly lower amounts of HA protein and progeny virions than wild-type or untreated cells. These data indicate that CTSB is involved in the expression of IAV-PR8 HA protein and subsequent optimal production of IAV-PR8 progeny virions. Targeting CTSB can be a novel therapeutic strategy for treating IAV infection.

Optimizing a multi-product closed-loop supply chain using NSGA-II, MOSA, and MOPSO meta-heuristic algorithms

NASA Astrophysics Data System (ADS)

Babaveisi, Vahid; Paydar, Mohammad Mahdi; Safaei, Abdul Sattar

2017-07-01

This study aims to discuss the solution methodology for a closed-loop supply chain (CLSC) network that includes the collection of used products as well as distribution of the new products. This supply chain is presented on behalf of the problems that can be solved by the proposed meta-heuristic algorithms. A mathematical model is designed for a CLSC that involves three objective functions of maximizing the profit, minimizing the total risk and shortages of products. Since three objective functions are considered, a multi-objective solution methodology can be advantageous. Therefore, several approaches have been studied and an NSGA-II algorithm is first utilized, and then the results are validated using an MOSA and MOPSO algorithms. Priority-based encoding, which is used in all the algorithms, is the core of the solution computations. To compare the performance of the meta-heuristics, random numerical instances are evaluated by four criteria involving mean ideal distance, spread of non-dominance solution, the number of Pareto solutions, and CPU time. In order to enhance the performance of the algorithms, Taguchi method is used for parameter tuning. Finally, sensitivity analyses are performed and the computational results are presented based on the sensitivity analyses in parameter tuning.

Cathepsin B plays a key role in optimal production of the influenza A virus

PubMed Central

Coleman, Macon D.; Ha, Soon-Duck; Haeryfar, S.M. Mansour; Barr, Stephen Dominic; Kim, Sung Ouk

2017-01-01

Background Influenza A virus (IAV) is the etiologic agent of the febrile respiratory illness, commonly referred to as ‘flu’. The lysosomal protease cathepsin B (CTSB) has shown to be involved in the lifecycle of various viruses. Here, we examined the role of CTSB in the IAV lifecycle. Methods CTSB-deficient (CTSB−/−) macrophages and the human lung epithelial cell line A549 cells treated with CA-074Me were infected with the A/Puerto Rico/8/34 strain of IAV (IAV-PR8). Viral entry and propagation were measured through quantitative real-time RT-PCR; production and localization of hemagglutinin (HA) protein in the infected host cells were analysed by Western blots, flow cytometry and confocal microscopy; production of progeny viruses were measured by a hemagglutination assay. Results CTSB−/− macrophages and CA-074Me-treated A549 cells had no defects in incorporating IAV-PR8 virions and permitting viral RNA synthesis. However, these cells produced significantly lower amounts of HA protein and progeny virions than wild-type or untreated cells. Conclusion These data indicate that CTSB is involved in the expression of IAV-PR8 HA protein and subsequent optimal production of IAV-PR8 progeny virions. Targeting CTSB can be a novel therapeutic strategy for treating IAV infection. PMID:29349092

Fire Weather Products for Public and Emergency Use: Extending Professional Resources to the Public

NASA Astrophysics Data System (ADS)

Rogers, M. A.; Schranz, S.; Kriederman, L.

2012-12-01

Large wildfires require significant resources to combat, including dedicated meteorological support to provide accurate and timely forecasts to assist incident commanders in making decisions for logistical and tactical firefighting operations. Smaller fires often require the same capabilities for understanding fire and the fire weather environment, but access to needed resources and tools is often limited due to technical, training, or education limitations. Providing fire weather information and training to incident commanders for smaller wildfires should prove to enhance firefighting capabilities and improve safety for both firefighters and for the public as well. One of the premier tools used to support fire weather forecasting for the largest wildfires is the FX-Net product, a thin-client version of the Advanced Weather Interactive Processing System used by NWS incident meteorologists (IMETs) deployed to large wildfires. We present results from an ongoing project to extend the sophisticated products available from FX-Net to more accessible and mobile software platforms, such as Google Earth. The project involves input from IMETs and fire commanders to identify the key parameters used in fighting wildfires, and involves a large training component for fire responders to utilize simplified products to improve understanding of fire weather in the context of firefighting operations.

Good Housekeeping Implementation for Improving Efficiency in Cassava Starch Industry (Case Study : Margoyoso District, Pati Regency)

NASA Astrophysics Data System (ADS)

Aji, Wijayanto Setyo; Purwanto; Suherman, S.

2018-02-01

Cassava starch industry is one of the leading small-medium enterprises (SMEs) in Pati Regency. Cassava starch industry released waste that reduces the quantity of final product and potentially contamined the environment. This study was conducted to observe the feasibility of good housekeeping implementation to reduce waste and at the same time improve efficiency of production process. Good housekeeping opportunities are consideration by three aspect, technical, economy and environmental. Good housekeeping opportunities involved water conservation and waste reduction. These included reuse of water in washing process, improving workers awareness in drying section and packaging section. Implementation of these opportunities can reduce water consumption, reduce wastewater and solid waste generation also increased quantity of final product.

Study of Systems and Technology for Liquid Hydrogen Production Independent of Fossil Fuels

NASA Technical Reports Server (NTRS)

Sprafka, R. J.; Escher, W. J. D.; Foster, R. W.; Tison, R. R.; Shingleton, J.; Moore, J. S.; Baker, C. R.

1983-01-01

Based on Kennedy Space Center siting and logistics requirements and the nonfossil energy resources at the Center, a number of applicable technologies and system candidates for hydrogen production were identified and characterized. A two stage screening of these technologies in the light of specific criteria identified two leading candidates as nonfossil system approaches. Conceptual design and costing of two solar-operated, stand alone systems, one photovoltaic based on and the other involving the power tower approach reveals their technical feasibility as sited as KSC, and the potential for product cost competitiveness with conventional supply approaches in the 1990 to 1210 time period. Conventional water hydrolysis and hydrogen liquefaction subsystems are integrated with the solar subsystems.

Paper versus plastic, water versus carbon and sustainable agriculture in the US

NASA Astrophysics Data System (ADS)

Bowling, L. C.

2011-12-01

It is increasingly recognized that food and energy security are inextricably linked to climate and climate change, resulting in the so-called climate, energy, food nexus, with the water cycle at its hub. The ability to provide sufficient and consistent energy and food for this generation, while not depleting soil, climate and water resources for future generations involves interconnected feedbacks along the paths of this wheel. In the US corn belt, for example, agricultural water management in the form of subsurface drainage lowers the regional water table to enhance crop production, while at the same time providing a conduit for the more efficient export of nitrate-nitrogen to the Gulf of Mexico and increasing rates of decomposition and subsidence in organic-rich soils. The use of control structures to regulate drainage water has the potential to reduce nitrate and carbon dioxide losses, while at the same time increasing the emissions of other greenhouse gases. Increased biofuels production offers the potential to increase domestic energy security, but at the cost of increased water demand and threats to food security. Just as budding US consumer environmentalists of the last decade struggled with the question of paper versus plastic for bagging their groceries, today's informed consumers are being asked to tacitly choose between water and carbon. The local foods movement encourages consumption of locally-produced foods as a means of reducing carbon emissions associated with food transportation, among other perceived benefits. At the same time, the concept of virtual water trade recognizes that importing the water embedded in production in the form of food can balance a local water deficit. Taking into account the virtual water of food production and carbon emissions of food transportation, the spatial arrangement of the current US crop portfolio minimizes neither water nor carbon footprints. Changes in crop distribution result in trade-offs between the per capita carbon and water footprints of the typical US diet. A compromise portfolio involving interactive water management, where the local region is defined by water availability, can help to minimize both the carbon and water footprints of food production in the conterminous US.

Methodology for Physics and Engineering of Reliable Products

NASA Technical Reports Server (NTRS)

Cornford, Steven L.; Gibbel, Mark

1996-01-01

Physics of failure approaches have gained wide spread acceptance within the electronic reliability community. These methodologies involve identifying root cause failure mechanisms, developing associated models, and utilizing these models to inprove time to market, lower development and build costs and higher reliability. The methodology outlined herein sets forth a process, based on integration of both physics and engineering principles, for achieving the same goals.

Cellular Therapy to Obtain Rapid Endochondral Bone Formation

DTIC Science & Technology

2012-03-01

biological information and involves the development of a novel biomaterial that can safely house the cells expressing the bone inductive factor to... produce the new bone at which time the material is then selectively eliminated. Ultimately this system has significant applicability. Often bone graft must...hypothesis will provide a safe and efficacious material for the production of bone leading to reliable fracture healing, circumventing the need for

16 CFR 1116.7 - Scope of section 37 and its relationship to section 15(b) of the CPSA.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Safety Act (15 U.S.C. 2052(a)) defines a “consumer product” as any article, or component part thereof... otherwise. The term “consumer product” does not include any article which is not customarily produced or...). Between the time a firm learns of an incident or problem involving a product that raises safety-related...

[Vigilance for veterinary medicinal products: Reports of adverse reactions in the year 2015].

PubMed

Müntener, C; Kupper, J; Naegeli, H; Gassner, B

2016-11-01

A total of 292 adverse reactions to veterinary medicinal products were reported during the year 2015. This represents an increase of 9% compared to the previous year (268 reports). Similar to previous years, most of the reactions reported were linked to the use of antiparasitics (55.1%), non-steroidal anti-inflammatory products (8.9%) or antiinfectives (9.3%). The affected animal species were primarily dogs (198 reports) and cats (42 reports), followed by cattle (31 reports) and horses (8 reports). Additional 42 reports were provided within the frame of consultations with Tox Info Suisse in Zürich and involved mainly the excessive intake of flavored tablets. Eight signals were identified from the reports received or the periodic safety update reports. They resulted in revisions of the product information in sections addressing contraindications, adverse reactions or withdrawal times.

Possible Quorum Sensing in Marine Snow Bacteria: Production of Acylated Homoserine Lactones by Roseobacter Strains Isolated from Marine Snow

PubMed Central

Gram, Lone; Grossart, Hans-Peter; Schlingloff, Andrea; Kiørboe, Thomas

2002-01-01

We report here, for the first time, that bacteria associated with marine snow produce communication signals involved in quorum sensing in gram-negative bacteria. Four of 43 marine microorganisms isolated from marine snow were found to produce acylated homoserine lactones (AHLs) in well diffusion and thin-layer chromatographic assays based on the Agrobacterium tumefaciens reporter system. Three of the AHL-producing strains were identified by 16S ribosomal DNA gene sequence analysis as Roseobacter spp., and this is the first report of AHL production by these α-Proteobacteria. It is likely that AHLs in Roseobacter species and other marine snow bacteria govern phenotypic traits (biofilm formation, exoenzyme production, and antibiotic production) which are required mainly when the population reaches high densities, e.g., in the marine snow community. PMID:12147515

Major Contribution of Flowering Time and Vegetative Growth to Plant Production in Common Bean As Deduced from a Comparative Genetic Mapping.

PubMed

González, Ana M; Yuste-Lisbona, Fernando J; Saburido, Soledad; Bretones, Sandra; De Ron, Antonio M; Lozano, Rafael; Santalla, Marta

2016-01-01

Determinacy growth habit and accelerated flowering traits were selected during or after domestication in common bean. Both processes affect several presumed adaptive traits such as the rate of plant production. There is a close association between flowering initiation and vegetative growth; however, interactions among these two crucial developmental processes and their genetic bases remain unexplored. In this study, with the aim to establish the genetic relationships between these complex processes, a multi-environment quantitative trait locus (QTL) mapping approach was performed in two recombinant inbred line populations derived from inter-gene pool crosses between determinate and indeterminate genotypes. Additive and epistatic QTLs were found to regulate flowering time, vegetative growth, and rate of plant production. Moreover, the pleiotropic patterns of the identified QTLs evidenced that regions controlling time to flowering traits, directly or indirectly, are also involved in the regulation of plant production traits. Further QTL analysis highlighted one QTL, on the lower arm of the linkage group Pv01, harboring the Phvul.001G189200 gene, homologous to the Arabidopsis thaliana TERMINAL FLOWER1 ( TFL1 ) gene, which explained up to 32% of phenotypic variation for time to flowering, 66% for vegetative growth, and 19% for rate of plant production. This finding was consistent with previous results, which have also suggested Phvul.001G189200 (PvTFL1y ) as a candidate gene for determinacy locus. The information here reported can also be applied in breeding programs seeking to optimize key agronomic traits, such as time to flowering, plant height and an improved reproductive biomass, pods, and seed size, as well as yield.

Major Contribution of Flowering Time and Vegetative Growth to Plant Production in Common Bean As Deduced from a Comparative Genetic Mapping

PubMed Central

González, Ana M.; Yuste-Lisbona, Fernando J.; Saburido, Soledad; Bretones, Sandra; De Ron, Antonio M.; Lozano, Rafael; Santalla, Marta

2016-01-01

Determinacy growth habit and accelerated flowering traits were selected during or after domestication in common bean. Both processes affect several presumed adaptive traits such as the rate of plant production. There is a close association between flowering initiation and vegetative growth; however, interactions among these two crucial developmental processes and their genetic bases remain unexplored. In this study, with the aim to establish the genetic relationships between these complex processes, a multi-environment quantitative trait locus (QTL) mapping approach was performed in two recombinant inbred line populations derived from inter-gene pool crosses between determinate and indeterminate genotypes. Additive and epistatic QTLs were found to regulate flowering time, vegetative growth, and rate of plant production. Moreover, the pleiotropic patterns of the identified QTLs evidenced that regions controlling time to flowering traits, directly or indirectly, are also involved in the regulation of plant production traits. Further QTL analysis highlighted one QTL, on the lower arm of the linkage group Pv01, harboring the Phvul.001G189200 gene, homologous to the Arabidopsis thaliana TERMINAL FLOWER1 (TFL1) gene, which explained up to 32% of phenotypic variation for time to flowering, 66% for vegetative growth, and 19% for rate of plant production. This finding was consistent with previous results, which have also suggested Phvul.001G189200 (PvTFL1y) as a candidate gene for determinacy locus. The information here reported can also be applied in breeding programs seeking to optimize key agronomic traits, such as time to flowering, plant height and an improved reproductive biomass, pods, and seed size, as well as yield. PMID:28082996

Nursing home medication administration cost minimization analysis.

PubMed

Hamrick, Irene; Nye, Ann Marie; Gardner, Casey K

2007-03-01

To assess the time it takes nurses to administer medications in the nursing home setting, to calculate nursing cost of medication administration, and to determine whether using extended-release products are justified by decreasing nursing costs. Cost-minimization analysis using observational data from a time-motion analysis. Two 150-bed nursing homes in rural eastern North Carolina. Nurses working during first and second shifts. Nurses were timed as they each administered medications to 12 patients. The mean time required to administer each dosage form was calculated. The cost of nursing time was based on the average nursing staff salary of $20.45 per hour as reported by the directors of nursing. Time and cost to dispense one more medication during an existing medication pass and an additional medication pass are calculated. The time to administer an additional dose of an oral medication to one patient was 45.01 seconds during an already scheduled medication pass and 63.05 seconds during a new medication pass. The cost of adding an oral medication once a day for a patient will cost $7.67 per month if administered at the same time as other medications or $10.74 per month if a new medication pass is required. The administration of other dosage forms, such as crushed, percutaneous enteroscopic gastrostomy, injection, and patch was more time involved and, thus, costlier. Formulas are provided to calculate medication administration cost based on local salary. Nursing time and costs for medication administration in the nursing home are great and should be considered when selecting a product. This may justify the selection of higher cost extended-release products.

Tunable infrared laser detection of pyrolysis products of explosives in soils

NASA Astrophysics Data System (ADS)

Wormhoudt, J.; Shorter, J. H.; McManus, J. B.; Kebabian, P. L.; Zahniser, M. S.; Kolb, Charles E.; Davis, W. M.; Cespedes, E. R.

1996-07-01

A research program involving two applications of tunable infrared laser differential absorption spectroscopy (TILDAS) with multipass, long-path absorption cells to the detection of explosives contamination in soils is reported. In the first application, sensitive, specific real-time species concentration measurements by TILDAS have led to new understanding of the processes involved in explosives detection by the heating of contaminated soils and the quantification of the resulting pyrolysis gases. In the second, we present results of our calculations of the properties of astigmatic off-axis resonator absorption cells, which show that useful TILDAS path lengths can be achieved inside a cone penetrometer probe.

Improvement of Efficiency of Transportation in Harbor Physical Distribution Considering Inland Carriage

NASA Astrophysics Data System (ADS)

Hino, Hisato; Hoshino, Satoshi; Fujisawa, Tomoharu; Maruyama, Shigehisa; Ota, Jun

Currently, container ships move cargo with minimal participation from external trucks. However, there is slack time between the departure of container ships and the completion of cargo handling by container ships without the participation of external trucks; therefore, external trucks can be used to move cargo without delaying the departure time. In this paper, we propose a solution involving the control algorithms of transfer cranes (TCs) because the efficiency of yard operations depends largely on the productivity of TCs. TCs work according to heuristic rules using the forecasted arrival times of internal and external trucks. Simulation results show that the proposed method can reduce the waiting time of external trucks and meet the departure time of container ships.

Comparison of static and dynamic sensory product characterizations based on check-all-that-apply questions with consumers.

PubMed

Alcaire, Florencia; Antúnez, Lucía; Vidal, Leticia; Zorn, Shari; Giménez, Ana; Castura, John C; Ares, Gastón

2017-07-01

The aim of the present work was to compare static and dynamic sensory product characterizations based on check-all-that-apply (CATA) questions with consumers. Three studies involving a total of 310 consumers were carried out. In each study, a between-subjects experimental design was used to compare static sensory characterizations obtained using CATA questions with dynamic characterizations over a relatively short time period using temporal CATA (TCATA). Three different product categories were evaluated (orange juice, strawberry yogurt, and vanilla milk desserts) using 6-11 sensory terms. TCATA data were analysed as CATA considering fixed time periods throughout the evaluation. CATA and TCATA were compared in terms of frequency of use of the terms, sample discrimination, and sample and term configurations. Asking consumers to continuously select the attributes that applied to describe a product and to deselect those that no longer applied during the evaluation period did not substantially modify the average citation proportion of terms or the maximum citation proportion for individual terms for liquid and semi-solid products with a relatively fast oral preparatory phase. Although both methodologies provided similar information, additional insights on how similarities and differences among samples evolved during consumption were obtained with TCATA in the case of products that experience large temporal changes or attributes with strong time-dependency. CATA provided similar information as TCATA for sensory attributes that did not change substantially during the evaluation period. Results from the present work suggest that static and dynamic product sensory characterizations using CATA questions with consumers provide complementary information about consumer experiences with food products. Copyright © 2017 Elsevier Ltd. All rights reserved.

Cost minimization analysis of different growth hormone pen devices based on time-and-motion simulations

PubMed Central

2010-01-01

Background Numerous pen devices are available to administer recombinant Human Growth Hormone (rhGH), and both patients and health plans have varying issues to consider when selecting a particular product and device for daily use. Therefore, the present study utilized multi-dimensional product analysis to assess potential time involvement, required weekly administration steps, and utilization costs relative to daily rhGH administration. Methods Study objectives were to conduct 1) Time-and-Motion (TM) simulations in a randomized block design that allowed time and steps comparisons related to rhGH preparation, administration and storage, and 2) a Cost Minimization Analysis (CMA) relative to opportunity and supply costs. Nurses naïve to rhGH administration and devices were recruited to evaluate four rhGH pen devices (2 in liquid form, 2 requiring reconstitution) via TM simulations. Five videotaped and timed trials for each product were evaluated based on: 1) Learning (initial use instructions), 2) Preparation (arrange device for use), 3) Administration (actual simulation manikin injection), and 4) Storage (maintain product viability between doses), in addition to assessment of steps required for weekly use. The CMA applied micro-costing techniques related to opportunity costs for caregivers (categorized as wages), non-drug medical supplies, and drug product costs. Results Norditropin® NordiFlex and Norditropin® NordiPen (NNF and NNP, Novo Nordisk, Inc., Bagsværd, Denmark) took less weekly Total Time (p < 0.05) to use than either of the comparator products, Genotropin® Pen (GTP, Pfizer, Inc, New York, New York) or HumatroPen® (HTP, Eli Lilly and Company, Indianapolis, Indiana). Time savings were directly related to differences in new package Preparation times (NNF (1.35 minutes), NNP (2.48 minutes) GTP (4.11 minutes), HTP (8.64 minutes), p < 0.05)). Administration and Storage times were not statistically different. NNF (15.8 minutes) and NNP (16.2 minutes) also took less time to Learn than HTP (24.0 minutes) and GTP (26.0 minutes), p < 0.05). The number of weekly required administration steps was also least with NNF and NNP. Opportunity cost savings were greater in devices that were easier to prepare for use; GTP represented an 11.8% drug product savings over NNF, NNP and HTP at time of study. Overall supply costs represented <1% of drug costs for all devices. Conclusions Time-and-motion simulation data used to support a micro-cost analysis demonstrated that the pen device with the greater time demand has highest net costs. PMID:20377905

Cost minimization analysis of different growth hormone pen devices based on time-and-motion simulations.

PubMed

Nickman, Nancy A; Haak, Sandra W; Kim, Jaewhan

2010-04-08

Numerous pen devices are available to administer recombinant Human Growth Hormone (rhGH), and both patients and health plans have varying issues to consider when selecting a particular product and device for daily use. Therefore, the present study utilized multi-dimensional product analysis to assess potential time involvement, required weekly administration steps, and utilization costs relative to daily rhGH administration. Study objectives were to conduct 1) Time-and-Motion (TM) simulations in a randomized block design that allowed time and steps comparisons related to rhGH preparation, administration and storage, and 2) a Cost Minimization Analysis (CMA) relative to opportunity and supply costs. Nurses naïve to rhGH administration and devices were recruited to evaluate four rhGH pen devices (2 in liquid form, 2 requiring reconstitution) via TM simulations. Five videotaped and timed trials for each product were evaluated based on: 1) Learning (initial use instructions), 2) Preparation (arrange device for use), 3) Administration (actual simulation manikin injection), and 4) Storage (maintain product viability between doses), in addition to assessment of steps required for weekly use. The CMA applied micro-costing techniques related to opportunity costs for caregivers (categorized as wages), non-drug medical supplies, and drug product costs. Norditropin(R) NordiFlex and Norditropin(R) NordiPen (NNF and NNP, Novo Nordisk, Inc., Bagsvaerd, Denmark) took less weekly Total Time (p < 0.05) to use than either of the comparator products, Genotropin(R) Pen (GTP, Pfizer, Inc, New York, New York) or HumatroPen(R) (HTP, Eli Lilly and Company, Indianapolis, Indiana). Time savings were directly related to differences in new package Preparation times (NNF (1.35 minutes), NNP (2.48 minutes) GTP (4.11 minutes), HTP (8.64 minutes), p < 0.05)). Administration and Storage times were not statistically different. NNF (15.8 minutes) and NNP (16.2 minutes) also took less time to Learn than HTP (24.0 minutes) and GTP (26.0 minutes), p < 0.05). The number of weekly required administration steps was also least with NNF and NNP. Opportunity cost savings were greater in devices that were easier to prepare for use; GTP represented an 11.8% drug product savings over NNF, NNP and HTP at time of study. Overall supply costs represented <1% of drug costs for all devices. Time-and-motion simulation data used to support a micro-cost analysis demonstrated that the pen device with the greater time demand has highest net costs.

Unitals and ovals of symmetric block designs in LDPC and space-time coding

NASA Astrophysics Data System (ADS)

Andriamanalimanana, Bruno R.

2004-08-01

An approach to the design of LDPC (low density parity check) error-correction and space-time modulation codes involves starting with known mathematical and combinatorial structures, and deriving code properties from structure properties. This paper reports on an investigation of unital and oval configurations within generic symmetric combinatorial designs, not just classical projective planes, as the underlying structure for classes of space-time LDPC outer codes. Of particular interest are the encoding and iterative (sum-product) decoding gains that these codes may provide. Various small-length cases have been numerically implemented in Java and Matlab for a number of channel models.

Cryptochrome 2 expression level is critical for adrenocorticotropin stimulation of cortisol production in the capuchin monkey adrenal.

PubMed

Torres-Farfan, C; Abarzua-Catalan, L; Valenzuela, F J; Mendez, N; Richter, H G; Valenzuela, G J; Serón-Ferré, M

2009-06-01

Timely production of glucocorticoid hormones in response to ACTH is essential for survival by coordinating energy intake and expenditure and acting as homeostatic regulators against stress. Adrenal cortisol response to ACTH is clock time dependent, suggesting that an intrinsic circadian oscillator in the adrenal cortex contributes to modulate the response to ACTH. Circadian clock gene expression has been reported in the adrenal cortex of several species. However, there are no reports accounting for potential involvement of adrenal clock proteins on cortisol response to ACTH. Here we explored whether the clock protein cryptochrome 2 (CRY2) knockdown modifies the adrenal response to ACTH in a primate. Adrenal gland explants from adult capuchin monkey (n = 5) were preincubated for 6 h with transfection vehicle (control) or with two different Cry2 antisense and sense probes followed by 48 h incubation in medium alone (no ACTH) or with 100 nm ACTH. Under control and sense conditions, ACTH increased cortisol production, whereas CRY2 suppression inhibited ACTH-stimulated cortisol production. Expression of the steroidogenic enzymes steroidogenic acute regulatory protein and 3beta-hydroxysteroid dehydrogenase at 48 h of incubation was increased by ACTH in control explants and suppressed by Cry2 knockdown. Additionally, we found that Cry2 knockdown decreased the expression of the clock gene brain and muscle aryl hydrocarbon receptor nuclear translocator-like protein (Bmal1) at the mRNA and protein levels. Altogether these results strongly support that the clock protein CRY2 is involved in the mechanism by which ACTH increases the expression of steroidogenic acute regulatory protein and 3beta-hydroxysteroid dehydrogenase. Thus, adequate expression levels of components of the adrenal circadian clock are required for an appropriate cortisol response to ACTH.

Stochastic thermodynamics, fluctuation theorems and molecular machines.

PubMed

Seifert, Udo

2012-12-01

Stochastic thermodynamics as reviewed here systematically provides a framework for extending the notions of classical thermodynamics such as work, heat and entropy production to the level of individual trajectories of well-defined non-equilibrium ensembles. It applies whenever a non-equilibrium process is still coupled to one (or several) heat bath(s) of constant temperature. Paradigmatic systems are single colloidal particles in time-dependent laser traps, polymers in external flow, enzymes and molecular motors in single molecule assays, small biochemical networks and thermoelectric devices involving single electron transport. For such systems, a first-law like energy balance can be identified along fluctuating trajectories. For a basic Markovian dynamics implemented either on the continuum level with Langevin equations or on a discrete set of states as a master equation, thermodynamic consistency imposes a local-detailed balance constraint on noise and rates, respectively. Various integral and detailed fluctuation theorems, which are derived here in a unifying approach from one master theorem, constrain the probability distributions for work, heat and entropy production depending on the nature of the system and the choice of non-equilibrium conditions. For non-equilibrium steady states, particularly strong results hold like a generalized fluctuation-dissipation theorem involving entropy production. Ramifications and applications of these concepts include optimal driving between specified states in finite time, the role of measurement-based feedback processes and the relation between dissipation and irreversibility. Efficiency and, in particular, efficiency at maximum power can be discussed systematically beyond the linear response regime for two classes of molecular machines, isothermal ones such as molecular motors, and heat engines such as thermoelectric devices, using a common framework based on a cycle decomposition of entropy production.

Productivity associated with visual status of computer users.

PubMed

Daum, Kent M; Clore, Katherine A; Simms, Suzanne S; Vesely, Jon W; Wilczek, Dawn D; Spittle, Brian M; Good, Greg W

2004-01-01

The aim of this project is to examine the potential connection between the astigmatic refractive corrections of subjects using computers and their productivity and comfort. We hypothesize that improving the visual status of subjects using computers results in greater productivity, as well as improved visual comfort. Inclusion criteria required subjects 19 to 30 years of age with complete vision examinations before being enrolled. Using a double-masked, placebo-controlled, randomized design, subjects completed three experimental tasks calculated to assess the effects of refractive error on productivity (time to completion and the number of errors) at a computer. The tasks resembled those commonly undertaken by computer users and involved visual search tasks of: (1) counties and populations; (2) nonsense word search; and (3) a modified text-editing task. Estimates of productivity for time to completion varied from a minimum of 2.5% upwards to 28.7% with 2 D cylinder miscorrection. Assuming a conservative estimate of an overall 2.5% increase in productivity with appropriate astigmatic refractive correction, our data suggest a favorable cost-benefit ratio of at least 2.3 for the visual correction of an employee (total cost 268 dollars) with a salary of 25,000 dollars per year. We conclude that astigmatic refractive error affected both productivity and visual comfort under the conditions of this experiment. These data also suggest a favorable cost-benefit ratio for employers who provide computer-specific eyewear to their employees.

Timing in turn-taking and its implications for processing models of language

PubMed Central

Levinson, Stephen C.; Torreira, Francisco

2015-01-01

The core niche for language use is in verbal interaction, involving the rapid exchange of turns at talking. This paper reviews the extensive literature about this system, adding new statistical analyses of behavioral data where they have been missing, demonstrating that turn-taking has the systematic properties originally noted by Sacks et al. (1974; hereafter SSJ). This system poses some significant puzzles for current theories of language processing: the gaps between turns are short (of the order of 200 ms), but the latencies involved in language production are much longer (over 600 ms). This seems to imply that participants in conversation must predict (or ‘project’ as SSJ have it) the end of the current speaker’s turn in order to prepare their response in advance. This in turn implies some overlap between production and comprehension despite their use of common processing resources. Collecting together what is known behaviorally and experimentally about the system, the space for systematic explanations of language processing for conversation can be significantly narrowed, and we sketch some first model of the mental processes involved for the participant preparing to speak next. PMID:26124727

Differential Timing of Spider Mite-Induced Direct and Indirect Defenses in Tomato Plants1[w

PubMed Central

Kant, Merijn R.; Ament, Kai; Sabelis, Maurice W.; Haring, Michel A.; Schuurink, Robert C.

2004-01-01

Through a combined metabolomics and transcriptomics approach we analyzed the events that took place during the first 5 d of infesting intact tomato (Lycopersicon esculentum) plants with spider mites (Tetranychus urticae). Although the spider mites had caused little visible damage to the leaves after 1 d, they had already induced direct defense responses. For example, proteinase inhibitor activity had doubled and the transcription of genes involved in jasmonate-, salicylate-, and ethylene-regulated defenses had been activated. On day four, proteinase inhibitor activity and particularly transcript levels of salicylate-regulated genes were still maintained. In addition, genes involved in phospholipid metabolism were up-regulated on day one and those in the secondary metabolism on day four. Although transcriptional up-regulation of the enzymes involved in the biosynthesis of monoterpenes and diterpenes already occurred on day one, a significant increase in the emission of volatile terpenoids was delayed until day four. This increase in volatile production coincided with the increased olfactory preference of predatory mites (Phytoseiulus persimilis) for infested plants. Our results indicate that tomato activates its indirect defenses (volatile production) to complement the direct defense response against spider mites. PMID:15122016

Toward a Virtual Laboratory to Assess Biodiversity from Data Produced by an Underwater Microscope

NASA Astrophysics Data System (ADS)

Beaulieu, S.; Ball, M.; Futrelle, J.; Sosik, H. M.

2016-12-01

Real-time data from sensors deployed in the ocean are increasingly available online for broad use by scientists, educators, and the public. Such data have previously been limited to physical parameters, but data for biological parameters are becoming more prevalent with the development of new submersible instruments. Imaging FlowCytobot (IFCB), for example, automatically and rapidly acquires images of microscopic algae (phytoplankton) at the base of the food web in marine ecosystems. These images and products from image processing and automated classification are accessible via web services from an IFCB dashboard. However, until now, to process these data further into results representing the biodiversity of the phytoplankton required a complex workflow that could only be executed by scientists involved in the instrument development. Also, because these data have been collected near continuously for a decade, a number of "big data" challenges arise in attempting to implement and reproduce the workflow. Our research is geared toward the development of a virtual laboratory to enable other scientists and educators, as new users of data from this underwater microscope, to generate biodiversity data products. Our solution involves an electronic notebook (Jupyter Notebook) that can be re-purposed by users with some Python programming experience. However, when we scaled the virtual laboratory to accommodate a 2-month example time series (thousands of binned files each representing thousands of images), we needed to expand the execution environment to include batch processing outside of the notebook. We will share how we packaged these tools to share with other scientists to perform their own biodiversity assessment from data available on an IFCB dashboard. Additional outcomes of software development in this project include a prototype for time-series visualizations to be generated in near-real-time and recommendations for new products accessible via web services from the IFCB dashboard.

Women, family, and work in Indonesian transmigration.

PubMed

Watkins, J F; Leinbach, T R; Falconer, K F

1993-04-01

The gender contribution to employment may be a critical factor in determining household economic viability. The significance for the resettlement program of the poor and landless from Indonesia's Inner Islands to the Outer Islands is clear. The aim of this paper is to examine the nature and extent of the role of women in off-farm employment (OFE) in a sample of South Sumatra, Indonesia transmigrants during the summer of 1989 at 9 different sites with different agricultural environments, settlement histories, and access to markets. A summary is provided of the literature on women's work and peasant household economies in Indonesia. Spatial and structural characteristics of employment among transmigrant women are described as well as life course influences on men's and women's OFE. A descriptive and explanatory model is presented that characterizes women's work and includes the influences of changing family structure on time allocation. Women's work appears fundamentally different from men's; household domestic work has a degree of flexibility in timing and tasks can be accomplished simultaneously. The hypothesis is that women will try to maximize their levels of flexibility and simultaneity in their income generating efforts. Discussion focuses on several theories of peasant household economies: 1) the Chayanov peasant model which posits that labor allocation for farm production in order to satisfy consumption needs is dependent on household demographic structure and the consumer labor balance; and 2) the New Home Economics theory which emphasizes the single utility function of the household. The villages represent 3 irrigated rice-growing and double cropping areas with established infrastructures and access to markets; 3 area with tidal swamp rice production and few resources; and area with rainfed rice production and limited resources and an area with ample resources; and 2 areas with smallholder rubber production. There were 560 ethnically Javanese households included in the sample, with an average proportion of 10% in each settlement. OFE is either on scheme, which means within the transmigration scheme and involves short distances to work, or off scheme, which entails longer work trips. 61% of the sample were involved in on scheme and 42% were involved in off scheme OFE, of which 10% were heads of households and 4% were spouses.

Narrative comprehension and production in children with SLI: An eye movement study

PubMed Central

ANDREU, LLORENÇ; SANZ-TORRENT, MONICA; OLMOS, JOAN GUÀRDIA; MACWHINNEY, BRIAN

2014-01-01

This study investigates narrative comprehension and production in children with specific language impairment (SLI). Twelve children with SLI (mean age 5; 8 years) and 12 typically developing children (mean age 5; 6 years) participated in an eye-tracking experiment designed to investigate online narrative comprehension and production in Catalan- and Spanish-speaking children with SLI. The comprehension task involved the recording of eye movements during the visual exploration of successive scenes in a story, while listening to the associated narrative. With regard to production, the children were asked to retell the story, while once again looking at the scenes, as their eye movements were monitored. During narrative production, children with SLI look at the most semantically relevant areas of the scenes fewer times than their age-matched controls, but no differences were found in narrative comprehension. Moreover, the analyses of speech productions revealed that children with SLI retained less information and made more semantic and syntactic errors during retelling. Implications for theories that characterize SLI are discussed. PMID:21453036

A prediction model to forecast the cost impact from a break in the production schedule

NASA Technical Reports Server (NTRS)

Delionback, L. M.

1977-01-01

The losses which are experienced after a break or stoppage in sequence of a production cycle portends an extremely complex situation and involves numerous variables, some of uncertain quantity and quality. There are no discrete formulas to define the losses during a gap in production. The techniques which are employed are therefore related to a prediction or forecast of the losses that take place, based on the conditions which exist in the production environment. Such parameters as learning curve slope, number of predecessor units, and length of time the production sequence is halted are utilized in formulating a prediction model. The pertinent current publications related to this subject are few in number, but are reviewed to provide an understanding of the problem. Example problems are illustrated together with appropriate trend curves to show the approach. Solved problems are also given to show the application of the models to actual cases or production breaks in the real world.

A clinical tool for predicting survival in ALS.

PubMed

Knibb, Jonathan A; Keren, Noa; Kulka, Anna; Leigh, P Nigel; Martin, Sarah; Shaw, Christopher E; Tsuda, Miho; Al-Chalabi, Ammar

2016-12-01

Amyotrophic lateral sclerosis (ALS) is a progressive and usually fatal neurodegenerative disease. Survival from diagnosis varies considerably. Several prognostic factors are known, including site of onset (bulbar or limb), age at symptom onset, delay from onset to diagnosis and the use of riluzole and non-invasive ventilation (NIV). Clinicians and patients would benefit from a practical way of using these factors to provide an individualised prognosis. 575 consecutive patients with incident ALS from a population-based registry in South-East England register for ALS (SEALS) were studied. Their survival was modelled as a two-step process: the time from diagnosis to respiratory muscle involvement, followed by the time from respiratory involvement to death. The effects of predictor variables were assessed separately for each time interval. Younger age at symptom onset, longer delay from onset to diagnosis and riluzole use were associated with slower progression to respiratory involvement, and NIV use was associated with lower mortality after respiratory involvement, each with a clinically significant effect size. Riluzole may have a greater effect in younger patients and those with longer delay to diagnosis. A patient's survival time has a roughly 50% chance of falling between half and twice the predicted median. A simple and clinically applicable graphical method of predicting an individual patient's survival from diagnosis is presented. The model should be validated in an independent cohort, and extended to include other important prognostic factors. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Age-related differences in time-based prospective memory: The role of time estimation in the clock monitoring strategy.

PubMed

Vanneste, Sandrine; Baudouin, Alexia; Bouazzaoui, Badiâa; Taconnat, Laurence

2016-07-01

Time-based prospective memory (TBPM) is required when it is necessary to remember to perform an action at a specific future point in time. This type of memory has been found to be particularly sensitive to ageing, probably because it requires a self-initiated response at a specific time. In this study, we sought to examine the involvement of temporal processes in the time monitoring strategy, which has been demonstrated to be a decisive factor in TBPM efficiency. We compared the performance of young and older adults in a TBPM task in which they had to press a response button every minute while categorising words. The design allowed participants to monitor time by checking a clock whenever they decided. Participants also completed a classic time-production task and several executive tasks assessing inhibition, updating and shifting processes. Our results confirm an age-related lack of accuracy in prospective memory performance, which seems to be related to a deficient strategic use of time monitoring. This could in turn be partially explained by age-related temporal deficits, as evidenced in the duration production task. These findings suggest that studies designed to investigate the age effect in TBPM tasks should consider the contribution of temporal mechanisms.

Wastes and by-products - alternatives for agricultural use

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boles, J.L.; Craft, D.J.; Parker, B.R.

1994-10-01

Top address a growing national problem with generation of wastes and by-products, TVA has been involved for several years with developing and commercializing environmentally responsible practices for eliminating, minimizing, or utilizing various wastes/by-products. In many cases, reducing waste generation is impractical, but the wastes/by-products can be converted into other environmentally sound products. In some instances, conversion of safe, value-added agricultural products in the best or only practical alternative. TVA is currently involved with a diversity of projects converting wastes/by-products into safe, economical, and agriculturally beneficial products. Environmental improvement projects have involved poultry litter, cellulosic wastes, used battery acid, ammonium sulfatemore » fines, lead smelting effluents, deep-welled sulfuric acid/ammonium bisulfate solutions, wood ash, waste magnesium ammonium sulfate slurry from recording tape production, and ammunition plant waste sodium nitrate/ammonium nitrate streams.« less

Algorithmic Management for Improving Collective Productivity in Crowdsourcing.

PubMed

Yu, Han; Miao, Chunyan; Chen, Yiqiang; Fauvel, Simon; Li, Xiaoming; Lesser, Victor R

2017-10-02

Crowdsourcing systems are complex not only because of the huge number of potential strategies for assigning workers to tasks, but also due to the dynamic characteristics associated with workers. Maximizing social welfare in such situations is known to be NP-hard. To address these fundamental challenges, we propose the surprise-minimization-value-maximization (SMVM) approach. By analysing typical crowdsourcing system dynamics, we established a simple and novel worker desirability index (WDI) jointly considering the effect of each worker's reputation, workload and motivation to work on collective productivity. Through evaluating workers' WDI values, SMVM influences individual workers in real time about courses of action which can benefit the workers and lead to high collective productivity. Solutions can be produced in polynomial time and are proven to be asymptotically bounded by a theoretical optimal solution. High resolution simulations based on a real-world dataset demonstrate that SMVM significantly outperforms state-of-the-art approaches. A large-scale 3-year empirical study involving 1,144 participants in over 9,000 sessions shows that SMVM outperforms human task delegation decisions over 80% of the time under common workload conditions. The approach and results can help engineer highly scalable data-driven algorithmic management decision support systems for crowdsourcing.

Report on electrocutions, electric shock, and electric burn injuries involving consumer products. final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1984-09-01

This report provides direction to a project to reduce the number of electrocution, electric shock and electric burn injuries. The first section uses CPSC data to rank the consumer products involved in these accidents on the basis of frequency, severity, and number of products in use. It also analyzes demographic and accident characteristics. The second section contains a technical review of accidents occurring in eight product groups: Portable Power Tools; Welders, Battery Chargers and Inverters; Personal Hygiene Products; Entertainment Products; Lawn and Garden Tools; Installed Stoves, Ranges and Cook Tops; Refrigerators and Freezers; and Fans. This section also includes amore » review of the relevant Underwriters Laboratories (UL) standards and suggestions for potential action to reduce the accidents involving these eight product groups.« less

Testing single point incremental forming moulds for rotomoulding operations

NASA Astrophysics Data System (ADS)

Afonso, Daniel; de Sousa, Ricardo Alves; Torcato, Ricardo

2017-10-01

Low pressure polymer processes as thermoforming or rotational moulding use much simpler moulds than high pressure processes like injection. However, despite the low forces involved in the process, moulds manufacturing for these applications is still a very material, energy and time consuming operation. Particularly in rotational moulding there is no standard for the mould manufacture and very different techniques are applicable. The goal of this research is to develop and validate a method for manufacturing plastically formed sheet metal moulds by single point incremental forming (SPIF) for rotomoulding and rotocasting operations. A Stewart platform based SPIF machine allow the forming of thick metal sheets, granting the required structural stiffness for the mould surface, and keeping a short manufacture lead time and low thermal inertia. The experimental work involves the proposal of a hollow part, design and fabrication of a sheet metal mould using dieless incremental forming techniques and testing its operation in the production of prototype parts.

Automated Flight Dynamics Product Generation for the EOS AM-1 Spacecraft

NASA Technical Reports Server (NTRS)

Matusow, Carla

1999-01-01

As part of NASA's Earth Science Enterprise, the Earth Observing System (EOS) AM-1 spacecraft is designed to monitor long-term, global, environmental changes. Because of the complexity of the AM-1 spacecraft, the mission operations center requires more than 80 distinct flight dynamics products (reports). To create these products, the AM-1 Flight Dynamics Team (FDT) will use a combination of modified commercial software packages (e.g., Analytical Graphic's Satellite ToolKit) and NASA-developed software applications. While providing the most cost-effective solution to meeting the mission requirements, the integration of these software applications raises several operational concerns: (1) Routine product generation requires knowledge of multiple applications executing on variety of hardware platforms. (2) Generating products is a highly interactive process requiring a user to interact with each application multiple times to generate each product. (3) Routine product generation requires several hours to complete. (4) User interaction with each application introduces the potential for errors, since users are required to manually enter filenames and input parameters as well as run applications in the correct sequence. Generating products requires some level of flight dynamics expertise to determine the appropriate inputs and sequencing. To address these issues, the FDT developed an automation software tool called AutoProducts, which runs on a single hardware platform and provides all necessary coordination and communication among the various flight dynamics software applications. AutoProducts, autonomously retrieves necessary files, sequences and executes applications with correct input parameters, and deliver the final flight dynamics products to the appropriate customers. Although AutoProducts will normally generate pre-programmed sets of routine products, its graphical interface allows for easy configuration of customized and one-of-a-kind products. Additionally, AutoProducts has been designed as a mission-independent tool, and can be easily reconfigured to support other missions or incorporate new flight dynamics software packages. After the AM-1 launch, AutoProducts will run automatically at pre-determined time intervals . The AutoProducts tool reduces many of the concerns associated with the flight dynamics product generation. Although AutoProducts required a significant effort to develop because of the complexity of the interfaces involved, its use will provide significant cost savings through reduced operator time and maximum product reliability. In addition, user satisfaction is significantly improved and flight dynamics experts have more time to perform valuable analysis work. This paper will describe the evolution of the AutoProducts tool, highlighting the cost savings and customer satisfaction resulting from its development. It will also provide details about the tool including its graphical interface and operational capabilities.

[Collaborative application of BEPS at different time steps.

PubMed

Lu, Wei; Fan, Wen Yi; Tian, Tian

2016-09-01

BEPSHourly is committed to simulate the ecological and physiological process of vegetation at hourly time steps, and is often applied to analyze the diurnal change of gross primary productivity (GPP), net primary productivity (NPP) at site scale because of its more complex model structure and time-consuming solving process. However, daily photosynthetic rate calculation in BEPSDaily model is simpler and less time-consuming, not involving many iterative processes. It is suitable for simulating the regional primary productivity and analyzing the spatial distribution of regional carbon sources and sinks. According to the characteristics and applicability of BEPSDaily and BEPSHourly models, this paper proposed a method of collaborative application of BEPS at daily and hourly time steps. Firstly, BEPSHourly was used to optimize the main photosynthetic parameters: the maximum rate of carboxylation (V c max ) and the maximum rate of photosynthetic electron transport (J max ) at site scale, and then the two optimized parameters were introduced into BEPSDaily model to estimate regional NPP at regional scale. The results showed that optimization of the main photosynthesis parameters based on the flux data could improve the simulate ability of the model. The primary productivity of different forest types in descending order was deciduous broad-leaved forest, mixed forest, coniferous forest in 2011. The collaborative application of carbon cycle models at different steps proposed in this study could effectively optimize the main photosynthesis parameters V c max and J max , simulate the monthly averaged diurnal GPP, NPP, calculate the regional NPP, and analyze the spatial distribution of regional carbon sources and sinks.

Production, concentration and titration of pseudotyped HIV-1-based lentiviral vectors.

PubMed

Kutner, Robert H; Zhang, Xian-Yang; Reiser, Jakob

2009-01-01

Over the past decade, lentiviral vectors have emerged as powerful tools for transgene delivery. The use of lentiviral vectors has become commonplace and applications in the fields of neuroscience, hematology, developmental biology, stem cell biology and transgenesis are rapidly emerging. Also, lentiviral vectors are at present being explored in the context of human clinical trials. Here we describe improved protocols to generate highly concentrated lentiviral vector pseudotypes involving different envelope glycoproteins. In this protocol, vector stocks are prepared by transient transfection using standard cell culture media or serum-free media. Such stocks are then concentrated by ultracentrifugation and/or ion exchange chromatography, or by precipitation using polyethylene glycol 6000, resulting in vector titers of up to 10(10) transducing units per milliliter and above. We also provide reliable real-time PCR protocols to titrate lentiviral vectors based on proviral DNA copies present in genomic DNA extracted from transduced cells or on vector RNA. These production/concentration methods result in high-titer vector preparations that show reduced toxicity compared with lentiviral vectors produced using standard protocols involving ultracentrifugation-based methods. The vector production and titration protocol described here can be completed within 8 d.

Biodegradation Mechanisms of Patulin in Candida guilliermondii: An iTRAQ-Based Proteomic Analysis

PubMed Central

Chen, Yong; Peng, Huai-Min; Wang, Xiao; Li, Bo-Qiang; Long, Man-Yuan; Tian, Shi-Ping

2017-01-01

Patulin, a potent mycotoxin, contaminates fruits and derived products worldwide, and is a serious health concern. Several yeast strains have shown the ability to effectively degrade patulin. However, the mechanisms of its biodegradation still remain unclear at this time. In the present study, biodegradation and involved mechanisms of patulin by an antagonistic yeast Candida guilliermondii were investigated. The results indicated that C. guilliermondii was capable of not only multiplying to a high population in medium containing patulin, but also effectively reducing patulin content in culture medium. Degradation of patulin by C. guilliermondii was dependent on the yeast cell viability, and mainly occurred inside cells. E-ascladiol was the main degradation product of patulin. An iTRAQ-based proteomic analysis revealed that the responses of C. guilliermondii to patulin were complex. A total of 30 differential proteins involved in 10 biological processes were identified, and more than two-thirds of the differential proteins were down-accumulated. Notably, a short-chain dehydrogenase (gi|190348612) was markedly induced by patulin at both the protein and mRNA levels. Our findings will provide a foundation to help enable the commercial development of an enzyme formulation for the detoxification of patulin in fruit-derived products. PMID:28208714

Direct Visualization of Mucus Production by the Cold-Water Coral Lophelia pertusa with Digital Holographic Microscopy

PubMed Central

Zetsche, Eva-Maria; Baussant, Thierry; Meysman, Filip J. R.; van Oevelen, Dick

2016-01-01

Lophelia pertusa is the dominant reef-building organism of cold-water coral reefs, and is known to produce significant amounts of mucus, which could involve an important metabolic cost. Mucus is involved in particle removal and feeding processes, yet the triggers and dynamics of mucus production are currently still poorly described because the existing tools to study these processes are not appropriate. Using a novel microscopic technique—digital holographic microscopy (DHM)–we studied the mucus release of L. pertusa under various experimental conditions. DHM technology permits μm-scale observations and allows the visualization of transparent mucoid substances in real time without staining. Fragments of L. pertusa were first maintained in flow-through chambers without stressors and imaged with DHM, then exposed to various stressors (suspended particles, particulate food and air exposure) and re-imaged. Under non-stressed conditions no release of mucus was observed, whilst mucus strings and sheaths were produced in response to suspended particles (activated charcoal and drill cuttings sediment) i.e. in a stressed condition. Mucus strings and so-called ‘string balls’ were also observed in response to exposure to particulate food (brine shrimp Artemia salina). Upon air-exposure, mucus production was clearly visible once the fragments were returned to the flow chamber. Distinct optical properties such as optical path length difference (OPD) were measured with DHM in response to the various stimuli suggesting that different mucus types are produced by L. pertusa. Mucus produced to reject particles is similar in refractive index to the surrounding seawater, suggesting that the energy content of this mucus is low. In contrast, mucus produced in response to either food particle addition or air exposure had a higher refractive index, suggesting a higher metabolic investment in the production of these mucoid substances. This paper shows for the first time the potential of DHM technology for the detection, characterization and quantification of mucus production through OPD measurements in L. pertusa. PMID:26840074

[The public perception of information about the potential risks of genetically modified crops in the food chain].

PubMed

Furnival, Ariadne Chloë; Pinheiro, Sônia Maria

2008-01-01

At a time when genetically modified (GM) crops are entering the Brazilian food chain, we present the findings of a study that makes use of a qualitative technique involving focal groups to look into the public's interpretation of the information available about this biotechnological innovation. This methodology produced results that revealed the interconnections drawn by the research subjects between this form of biotechnology, changes to the environment, and food production in general. The mistrust expressed about GM crops was particularly attributed by the participants to the non-availability of comprehensible information in the mass media or on product labels.

On-line measurement of heat of combustion

NASA Technical Reports Server (NTRS)

Chaturvedi, S. K.; Chegini, H.

1988-01-01

An experimental method for an on-line measurement of heat of combustion of a gaseous hydrocarbon fuel mixture of unknown composition is developed. It involves combustion of a test gas with a known quantity of air to achieve a predetermined oxygen concentration level in the combustion products. This is accomplished by a feedback controller which maintains the gas volumetric flow rate at a level consistent with the desired oxygen concentration in the products. The heat of combustion is determined from a known correlation with the gas volumetric flow rate. An on-line microcomputer accesses the gas volumetric flow data, and displays the heat of combustion values at desired time intervals.

Can helminths or helminth-derived products be used in humans to prevent or treat allergic diseases?

PubMed

Erb, Klaus J

2009-02-01

Recent epidemiological and experimental data indicate that infection with helminths can protect humans from the development of allergic disorders by immunosuppressive mechanisms that involve the induction of IL-10 and/or regulatory T cells. Furthermore, helminth-derived immune modulators suppress allergic responses in mice. Trichuris suis therapy has been shown to be safe and efficacious in treating inflammatory bowel disease in humans. Has the time come to treat patients who have allergic diseases or healthy humans who are at risk of developing these diseases with helminths or helminth-derived products? Here, I discuss the pros and cons of such an approach.

Circadian expression of steroidogenic cytochromes P450 in the mouse adrenal gland--involvement of cAMP-responsive element modulator in epigenetic regulation of Cyp17a1.

PubMed

Košir, Rok; Zmrzljak, Ursula Prosenc; Bele, Tanja; Acimovic, Jure; Perse, Martina; Majdic, Gregor; Prehn, Cornelia; Adamski, Jerzy; Rozman, Damjana

2012-05-01

The cytochrome P450 (CYP) genes Cyp51, Cyp11a1, Cyp17a1, Cyb11b1, Cyp11b2 and Cyp21a1 are involved in the adrenal production of corticosteroids, whose circulating levels are circadian. cAMP signaling plays an important role in adrenal steroidogenesis. By using cAMP responsive element modulator (Crem) knockout mice, we show that CREM isoforms contribute to circadian expression of steroidogenic CYPs in the mouse adrenal gland. Most striking was the CREM-dependent hypomethylation of the Cyp17a1 promoter at zeitgeber time 12, which resulted in higher Cyp17a1 mRNA and protein expression in the knockout adrenal glands. The data indicate that products of the Crem gene control the epigenetic repression of Cyp17 in mouse adrenal glands. © 2011 The Authors Journal compilation © 2011 FEBS.

A role for the JAK-STAT1 pathway in blocking replication of HSV-1 in dendritic cells and macrophages

PubMed Central

Mott, Kevin R; UnderHill, David; Wechsler, Steven L; Town, Terrence; Ghiasi, Homayon

2009-01-01

Background Macrophages and dendritic cells (DCs) play key roles in host defense against HSV-1 infection. Although macrophages and DCs can be infected by herpes simplex virus type 1 (HSV-1), both cell types are resistant to HSV-1 replication. The aim of our study was to determine factor (s) that are involved in the resistance of DCs and macrophages to productive HSV-1 infection. Results We report here that, in contrast to bone marrow-derived DCs and macrophages from wild type mice, DCs and macrophages isolated from signal transducers and activators of transcription-1 deficient (STAT1-/-) mice were susceptible to HSV-1 replication and the production of viral mRNAs and DNA. There were differences in expression of immediate early, early, and late gene transcripts between STAT1+/+ and STAT1-/- infected APCs. Conclusion These results suggest for the first time that the JAK-STAT1 pathway is involved in blocking replication of HSV-1 in DCs and macrophages. PMID:19439086

Method and apparatus for iterative lysis and extraction of algae

DOEpatents

Chew, Geoffrey; Boggs, Tabitha; Dykes, Jr., H. Waite H.; Doherty, Stephen J.

2015-12-01

A method and system for processing algae involves the use of an ionic liquid-containing clarified cell lysate to lyse algae cells. The resulting crude cell lysate may be clarified and subsequently used to lyse algae cells. The process may be repeated a number of times before a clarified lysate is separated into lipid and aqueous phases for further processing and/or purification of desired products.

Preparation of nitrogen-doped carbon tubes

DOEpatents

Chung, Hoon Taek; Zelenay, Piotr

2015-12-22

A method for synthesizing nitrogen-doped carbon tubes involves preparing a solution of cyanamide and a suitable transition metal-containing salt in a solvent, evaporating the solvent to form a solid, and pyrolyzing the solid under an inert atmosphere under conditions suitable for the production of nitrogen-doped carbon tubes from the solid. Pyrolyzing for a shorter period of time followed by rapid cooling resulted in a tubes with a narrower average diameter.

Crafting the Department of Defense Energy Strategy

DTIC Science & Technology

2010-03-01

various biomasses – corn, cellulose, and algae for example – with varying costs and with varying degrees of net greenhouse gas emission. 54 These same...have varying degrees of net emissions. Because corn ethanol production uses a tremendous amount of petroleum to fertilize, cultivate , transport and...lengthy periods of time. Other techniques involve using excess carbon dioxide to feed biofuel feedstocks such as algae at a co- located energy

Industry Versus DoD: A Comparative Study of Software Reuse

DTIC Science & Technology

1994-09-01

development costs and production time. By no means have they perfected reuse, but some corporations are starting to reap the benefits of their reuse...and cultural resistance (Garry, 1992). Reusable code is not a cure-all for programmers and does not always provide significant benefits . Quite often...and benefits , quality, achievable reuse goals, domain analysis, staff experience, development, and recognition of the effort involved (IEEE Software

Microbe Detector

NASA Technical Reports Server (NTRS)

1985-01-01

Under NASA contracts, McDonnell Douglas developed a microbial load monitor to detect bacterial contamination. Vitek Systems, Inc., a subsidiary, was created to commercialize the product for analyzing body fluids. With the AutoMicrobic System, infections may be treated more quickly. The process involves injecting the fluid into identification cards and screening the reaction. Antibiotic treatments are also suggested. Time in hospital and human error is reduced. There are also possible industrial and environmental applications.

Onchocerciasis-related epilepsy? Prospects at a time of uncertainty.

PubMed

Marin, Benoît; Boussinesq, Michel; Druet-Cabanac, Michel; Kamgno, Joseph; Bouteille, Bernard; Preux, Pierre-Marie

2006-01-01

Epilepsy and onchocerciasis (river blindness) constitute serious public health problems in several tropical countries. There are four main mechanisms that might explain a relationship between these two diseases: (i) the presence of Onchocerca volvulus in the central nervous system; (ii) the pathogenicity of various O. volvulus strains; (iii) immunological mechanisms involving cross-reactive immunization or cytokine production during infection; and (iv) the triggering role of insomnia due to itching.

Applying Japanese management tips to patient accounts.

PubMed

Groenevelt, C J

1990-04-01

"Just in time," a Japanese management philosophy that has been applied successfully in manufacturing operations, also can be used to improve management of patient accounts departments. Under its principles, healthcare organizations would develop standardized procedures; involve workers in decision making; set up training and education programs aimed at creating a multi-skilled pool of workers; establish smooth production schedules; and foster cooperation and commitment to the philosophy throughout the organization.

Multivariate Adaptive Regression Splines (Preprint)

DTIC Science & Technology

1990-08-01

fold cross -validation would take about ten time as long, and MARS is not all that fast to begin with. Friedman has a number of examples showing...standardized mean squared error of prediction (MSEP), the generalized cross validation (GCV), and the number of selected terms (TERMS). In accordance with...and mi= 10 case were almost exclusively spurious cross product terms and terms involving the nuisance variables x6 through xlo. This large number of

Single-Molecule Spectroscopy and Imaging Studies of Protein Dynamics

NASA Astrophysics Data System (ADS)

Lu, H. Peter

2012-04-01

Enzymatic reactions and protein-protein interactions are traditionally studied at the ensemble level, despite significant static and dynamic inhomogeneities. Subtle conformational changes play a crucial role in protein functions, and these protein conformations are highly dynamic rather than being static. We applied AFM-enhanced single-molecule spectroscopy to study the mechanisms and dynamics of enzymatic reactions involved with kinase and lysozyme proteins. Enzymatic reaction turnovers and the associated structure changes of individual protein molecules were observed simultaneously in real-time by single-molecule FRET detections. Our single-molecule spectroscopy measurements of T4 lysozyme and HPPK enzymatic conformational dynamics have revealed time bunching effect and intermittent coherence in conformational state change dynamics involving in enzymatic reaction cycles. The coherent conformational state dynamics suggests that the enzymatic catalysis involves a multi-step conformational motion along the coordinates of substrate-enzyme complex formation and product releasing, presenting as an extreme dynamic behavior intrinsically related to the time bunching effect that we have reported previously. Our results of HPPK interaction with substrate support a multiple-conformational state model, being consistent with a complementary conformation selection and induced-fit enzymatic loop-gated conformational change mechanism in substrate-enzyme active complex formation. Our new approach is applicable to a wide range of single-molecule FRET measurements for protein conformational changes under enzymatic reactions.

Effects of practice on variability in an isochronous serial interval production task: asymptotical levels of tapping variability after training are similar to those of musicians.

PubMed

Madison, Guy; Karampela, Olympia; Ullén, Fredrik; Holm, Linus

2013-05-01

Timing permeates everyday activities such as walking, dancing and music, yet the effect of short-term practice in this ubiquitous activity is largely unknown. In two training experiments involving sessions spread across several days, we examined short-term practice effects on timing variability in a sequential interval production task. In Experiment 1, we varied the mode of response (e.g., drumstick and finger tapping) and the level of sensory feedback. In Experiment 2 we varied the interval in 18 levels ranging from 500 ms to 1624 ms. Both experiments showed a substantial decrease in variability within the first hour of practice, but little thereafter. This effect was similar across mode of response, amount of feedback, and interval duration, and was manifested as a reduction in both local variability (between neighboring intervals) and drift (fluctuation across multiple intervals). The results suggest mainly effects on motor implementation rather than on cognitive timing processes, and have methodological implications for timing studies that have not controlled for practice. Copyright © 2013 Elsevier B.V. All rights reserved.

An Ime2-like mitogen-activated protein kinase is involved in cellulase expression in the filamentous fungus Trichoderma reesei.

PubMed

Chen, Fei; Chen, Xiu-Zhen; Su, Xiao-Yun; Qin, Li-Na; Huang, Zhen-Bang; Tao, Yong; Dong, Zhi-Yang

2015-10-01

Eukaryotic mitogen-activated protein kinases (MAPKs) play crucial roles in transducing environmental and developmental signals inside the cell and regulating gene expression, however, the roles of MAPKs remain largely unknown in Trichoderma reesei. T. reesei ime2 (TrIme2) encodes an Ime2-like MAPK in T. reesei. The deletion of the TrIme2 gene led to 90% increase in cellulase activity against filter paper during earlier period time of cellulase induction as well as the extracellular protein production. Compared to the parent strain, the transcriptional levels of the three major cellulase genes cbh1,cbh2, egl1 were increased by about 9 times, 4 times, 2 times, respectively, at 8 h after cellulase induction in the ΔTrIme2 mutant. In addition, the disruption of TrIme2 caused over 50% reduction of the transcript levels of cellulase transcriptional regulators cre1 and xyr1. TrIme2 functions in regulation of the expression of cellulase gene in T.reesei, and is a good candidate for genetically engineering of T. reesei for higher cellulase production.

"Everybody Gotta Have a Dream": Rap-centered Aspirations among Young Black Males Involved in Rap Music Production - A Qualitative Study.

PubMed

Foster, B Brian

Youth express diverse desires for their educational and occupational futures. Sometimes these aspirations are directed towards somewhat unconventional careers such as rapping and other types of involvement in rap music production. Although many studies have examined traditional educational and occupational aspirations, less is known about the factors that give rise to rap-centered aspirations and how individuals pursue them, particularly as they transition to early adulthood. Drawing on 54 semi- and unstructured interviews with 29 black young men involved in rap music production, I find that rap-centered aspirations are shaped by a range of factors, most notably feedback regarding one's rap skills, access to recording and production equipment, and the financial means to maintain involvement in rap music production while also ensuring personal and family economic stability. The young men in the study attached different meanings to their aspirations and sometimes recast their motivations for participating in rap music production in response to various social and economic factors.

Carbon Sources Influence Fumonisin Production in Fusarium proliferatum.

PubMed

Li, Taotao; Gong, Liang; Jiang, Guoxiang; Wang, Yong; Gupta, Vijai Kumar; Qu, Hongxia; Duan, Xuewu; Wang, Jiasheng; Jiang, Yueming

2017-10-01

Fusarium proliferatum is a worldwide fungal pathogen that produces fumonisins which are harmful to animal and human health. However, environmental factors affecting fumonisin biosynthesis in F. proliferatum are not well understood. Based on our preliminary results, in this study, we investigated the effect of sucrose or mannose as the sole carbon source on fumonisin B (FB) production by F. proliferatum and studied their underlying mechanisms via proteome and gene expression analysis. Our results showed that mannose, used as the sole carbon source, significantly blocked fumonisin B 1 and B 2 production by F. proliferatum as compared with the use of sucrose. Fifty-seven differentially expressed proteins were successfully identified. The downregulated proteins in the mannose-cultured strain were mainly involved in carbon metabolism, response to stress, and methionine metabolism, as compared with the sucrose-cultured strain. Moreover, quantitative real-time PCR analysis indicated that expression of several key genes involved in FB biosynthetic pathway and in transcription regulation were significantly downregulated in the mannose-cultured F. proliferatum, whereas expression of histone deacetylation-related genes were significantly upregulated. These results suggested that the blockage of FB biosynthesis by mannose was associated with the decreases in conversion of acetyl-CoA to polyketide, methionine biosynthesis, and NADPH regeneration. More importantly, milder oxidative stress, downregulated expression of genes involved in biosynthetic pathway and transcription regulation, and upregulated expression of genes with histone deacetylation possibly were responsible for the blockage of FB biosynthesis in F. proliferatum. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Collecting a sample of loggerhead sea turtle hatchlings before a natural emergence does not reduce nest productivity

USGS Publications Warehouse

Salmon, Michael; Carthy, Raymond R.; Lohmann, Catherine M. F.; Lohmann, Kenneth J.; Wyneken, Jeanette

2012-01-01

 In numerous studies involving hatchling sea turtles, researchers have collected small numbers of hatchlings from nests a few hours before the turtles would otherwise have emerged naturally. This procedure makes it possible to do experiments in which the behavioral or physiological responses of numerous hatchlings must be tested in a limited period of time, and also allows hatchlings to be released back into the sea in time to migrate offshore before dawn. In principle, however, the procedure might inadvertently reduce nest productivity (the number of hatchlings that successfully leave the nest), if digging into a nest prior to emergence somehow reduces the ability of the remaining turtles to emerge. We compared nest productivity in 67 experimental loggerhead nests, from which we removed 10 hatchlings before a natural emergence, to 95 control nests left undisturbed before a natural emergence. The 2 groups showed no statistical differences in productivity. We conclude that taking a few hatchlings from a loggerhead nest shortly before a natural emergence has no negative impact on hatchling production if sampling is done with care at locations where there are few nest predators, and at sites where an emergence can be predicted because nest deposition dates are known.

Investigation of a submerged membrane reactor for continuous biomass hydrolysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Malmali, Mohammadmahdi; Stickel, Jonathan; Wickramasinghe, S. Ranil

Enzymatic hydrolysis of cellulose is one of the most costly steps in the bioconversion of lignocellulosic biomass. Use of a submerged membrane reactor has been investigated for continuous enzymatic hydrolysis of cellulose thus allowing for greater use of the enzyme compared to a batch process. Moreover, the submerged 0.65 μm polyethersulfone microfiltration membrane avoids the need to pump a cellulose slurry through an external loop. Permeate containing glucose is withdrawn at pressures slightly below atmospheric pressure. The membrane rejects cellulose particles and cellulase enzyme bound to cellulose. Our proof-of-concept experiments have been conducted using a modified, commercially available membrane filtrationmore » cell under low fluxes around 75 L/(m2 h). The operating flux is determined by the rate of glucose production. Maximizing the rate of glucose production involves optimizing mixing, reactor holding time, and the time the feed is held in the reactor prior to commencement of membrane filtration and continuous operation. When we maximize glucose production rates it will require that we operate it at low glucose concentration in order to minimize the adverse effects of product inhibition. Consequently practical submerged membrane systems will require a combined sugar concentration step in order to concentrate the product sugar stream prior to fermentation.« less

Energy yields in the prebiotic synthesis of hydrogen cyanide and formaldehyde

NASA Technical Reports Server (NTRS)

Stribling, R.; Miller, S. L.

1986-01-01

Prebiotic experiments are usually reported in terms of carbon yields, i.e., the yield of product based on the total carbon in the system. These experiments usually involve a large input of energy and are designed to maximize the yields of product. However, large inputs of energy result in multiple activation of the reactants and products. A more realistic prebiotic experiment is to remove the products of the activation step so they are not exposed a second time to the energy source. This is equivalent to transporting the products synthesized in the primitive atmosphere to the ocean, and thereby protecting them from destruction by atmospheric energy sources. Experiments of this type, using lower inputs of energy, give energy yields (moles of products/joule) which can be used to estimate the relative importance of the different energy sources on the primitive earth. Simulated prebiotic atmospheres containing either CH4, CO or CO2 with N2, H2O and variable amounts of H2 were subjected to a high frequency Tesla coil. Samples of the aqueous phase were taken at various time intervals from 1 hr to 7 days, and the energy yields were obtained by extrapolation to zero time. The samples were analyzed for HCN with the cyanide electrode and for H2CO by chromotropic acid. The spark energy was estimated by calorimetry. The temperature rise in an insulated discharge flask was compared with the temperature rise from a resistance heater in the same flask. These results will be compared with calculated production rates of HCN and H2CO from lightning and a number of photochemical processes on the primitive Earth.

Impaired motor inhibition in adults who stutter - evidence from speech-free stop-signal reaction time tasks.

PubMed

Markett, Sebastian; Bleek, Benjamin; Reuter, Martin; Prüss, Holger; Richardt, Kirsten; Müller, Thilo; Yaruss, J Scott; Montag, Christian

2016-10-01

Idiopathic stuttering is a fluency disorder characterized by impairments during speech production. Deficits in the motor control circuits of the basal ganglia have been implicated in idiopathic stuttering but it is unclear how these impairments relate to the disorder. Previous work has indicated a possible deficiency in motor inhibition in children who stutter. To extend these findings to adults, we designed two experiments to probe executive motor control in people who stutter using manual reaction time tasks that do not rely on speech production. We used two versions of the stop-signal reaction time task, a measure for inhibitory motor control that has been shown to rely on the basal ganglia circuits. We show increased stop-signal reaction times in two independent samples of adults who stutter compared to age- and sex-matched control groups. Additional measures involved simple reaction time measurements and a task-switching task where no group difference was detected. Results indicate a deficiency in inhibitory motor control in people who stutter in a task that does not rely on overt speech production and cannot be explained by general deficits in executive control or speeded motor execution. This finding establishes the stop-signal reaction time as a possible target for future experimental and neuroimaging studies on fluency disorders and is a further step towards unraveling the contribution of motor control deficits to idiopathic stuttering. Copyright © 2016 Elsevier Ltd. All rights reserved.

HIV gp120- and methamphetamine-mediated oxidative stress induces astrocyte apoptosis via cytochrome P450 2E1

PubMed Central

Shah, A; Kumar, S; Simon, S D; Singh, D P; Kumar, A

2013-01-01

HIV-1 glycoprotein 120 (gp120) is known to cause neurotoxicity via several mechanisms including production of proinflammatory cytokines/chemokines and oxidative stress. Likewise, drug abuse is thought to have a direct impact on the pathology of HIV-associated neuroinflammation through the induction of proinflammatory cytokines/chemokines and oxidative stress. In the present study, we demonstrate that gp120 and methamphetamine (MA) causes apoptotic cell death by inducing oxidative stress through the cytochrome P450 (CYP) and NADPH oxidase (NOX) pathways. The results showed that both MA and gp120 induced reactive oxygen species (ROS) production in concentration- and time-dependent manners. The combination of gp120 and MA also induced CYP2E1 expression at both mRNA (1.7±0.2- and 2.8±0.3-fold in SVGA and primary astrocytes, respectively) and protein (1.3±0.1-fold in SVGA and 1.4±0.03-fold in primary astrocytes) levels, suggesting the involvement of CYP2E1 in ROS production. This was further confirmed by using a selective inhibitor of CYP2E1, diallylsulfide (DAS), and CYP2E1 knockdown using siRNA, which significantly reduced ROS production (30–60%). As the CYP pathway is known to be coupled with the NOX pathway, including Fenton–Weiss–Haber (FWH) reaction, we examined whether the NOX pathway is also involved in ROS production induced by either gp120 or MA. Our results showed that selective inhibitors of NOX, diphenyleneiodonium (DPI), and FWH reaction, deferoxamine (DFO), also significantly reduced ROS production. These findings were further confirmed using specific siRNAs against NOX2 and NOX4 (NADPH oxidase family). We then showed that gp120 and MA both induced apoptosis (caspase-3 activity and DNA lesion using TUNEL (terminal deoxynucleotidyltransferase-mediated dUTP nick-end labeling) assay) and cell death. Furthermore, we showed that DAS, DPI, and DFO completely abolished apoptosis and cell death, suggesting the involvement of CYP and NOX pathways in ROS-mediated apoptotic cell death. In conclusion, this is the first report on the involvement of CYP and NOX pathways in gp120/MA-induced oxidative stress and apoptotic cell death in astrocytes, which has clinical implications in neurodegenerative diseases, including neuroAIDS. PMID:24113184

Commercial opportunities in bioseparations and physiological testing aboard Space Station Freedom

NASA Technical Reports Server (NTRS)

Hymer, W. C.

1992-01-01

The Center for Cell Research (CCR) is a NASA Center for the Commercial Development of Space which has as its main goal encouraging industry-driven biomedical/biotechnology space projects. Space Station Freedom (SSF) will provide long duration, crew-tended microgravity environments which will enhance the opportunities for commercial biomedical/biotechnology projects in bioseparations and physiological testing. The CCR bioseparations program, known as USCEPS (for United States Commercial Electrophoresis Program in Space), is developing access for American industry to continuous-flow electrophoresis aboard SSF. In space, considerable scale-up of continuous free-flow electrophoresis is possible for cells, sub cellular particles, proteins, growth factors, and other biological products. The lack of sedemination and buoyancy-driven convection flow enhances purity of separations and the amount of material processed/time. Through the CCR's physiological testing program, commercial organizations will have access aboard SSF to physiological systems experiments (PSE's); the Penn State Biomodule; and telemicroscopy. Physiological systems experiments involve the use of live animals for pharmaceutical product testing and discovery research. The Penn State Biomodule is a computer-controlled mini lab useful for projects involving live cells or tissues and macro molecular assembly studies, including protein crystallization. Telemicroscopy will enable staff on Earth to manipulate and monitor microscopic specimens on SSF for product development and discovery research or for medical diagnosis of astronaut health problems. Space-based product processing, testing, development, and discovery research using USCEPS and CCR's physiological testing program offer new routes to improved health on Earth. Direct crew involvement-in biomedical/biotechnology projects aboard SSF will enable better experimental outcomes. The current data base shows that there is reason for considerable optimism regarding what the CCDS program and the biomedical/biotechnology industry can expect to gain from a permanent manned presence in space.

Quercetin manipulates the expression of genes involved in the reactive oxygen species (ROS) processin chicken heterophils.

PubMed

Nambooppha, Boondarika; Photichai, Kornravee; Wongsawan, Kanreuthai; Chuammitri, Phongsakorn

2018-06-06

Chicken heterophils generate reactive oxygen species (ROS) molecules to defend against invading pathogens. The present study examined effects of quercetin on chicken heterophils. Heterophils were stimulated with PBS, 50 μM quercetin (QH), PMA or Escherichia coli (EC) and the resulting intracellular ROS molecules were determined. Flow cytometry results showed that cells stimulated with QH, PMA and EC had a higher ROS production. Increases in intracellular ROS molecules were identified in all treatment groups by fluorescence microscopy. Determination of the ability of quercetin to manipulate mRNA expression of ROS subunits was assessed using real-time RT-PCR. Quercetin and other stimulants up-regulated the majority of genes involved in ROS production: CYBB (NOX2), NCF1 (p47 phox ), NCF2 (p67 phox ), NOX1 and RAC2. The antioxidant property of QH was explored by measuring mRNA expression of CAT and SOD1. The data indicate increased levels of CAT with all treatments; however, only QH attenuated the expression ofthe SOD1 gene. To further investigate the effects of ROS-driven inflammation or cell death, IL6, CASP8, and MCL1 genes were preferentially tested. The inflammatory gene (IL6) was profoundly down-regulated in the QH- and PMA-treated groups while EC induced a strikingly high IL6 expression level. Investigation of the known apoptotic (CASP8) and anti-apoptotic (MCL1) genes found down-regulation of CASP8 in the QH- and PMA-treated groups which were contradicted to the MCL1 gene. In conclusion, quercetin can enhance ROS production by regulating the expression of genes involved in ROS production as well as in subsequent processes.

Gene expression in developing watermelon fruit

PubMed Central

Wechter, W Patrick; Levi, Amnon; Harris, Karen R; Davis, Angela R; Fei, Zhangjun; Katzir, Nurit; Giovannoni, James J; Salman-Minkov, Ayelet; Hernandez, Alvaro; Thimmapuram, Jyothi; Tadmor, Yaakov; Portnoy, Vitaly; Trebitsh, Tova

2008-01-01

Background Cultivated watermelon form large fruits that are highly variable in size, shape, color, and content, yet have extremely narrow genetic diversity. Whereas a plethora of genes involved in cell wall metabolism, ethylene biosynthesis, fruit softening, and secondary metabolism during fruit development and ripening have been identified in other plant species, little is known of the genes involved in these processes in watermelon. A microarray and quantitative Real-Time PCR-based study was conducted in watermelon [Citrullus lanatus (Thunb.) Matsum. & Nakai var. lanatus] in order to elucidate the flow of events associated with fruit development and ripening in this species. RNA from three different maturation stages of watermelon fruits, as well as leaf, were collected from field grown plants during three consecutive years, and analyzed for gene expression using high-density photolithography microarrays and quantitative PCR. Results High-density photolithography arrays, composed of probes of 832 EST-unigenes from a subtracted, fruit development, cDNA library of watermelon were utilized to examine gene expression at three distinct time-points in watermelon fruit development. Analysis was performed with field-grown fruits over three consecutive growing seasons. Microarray analysis identified three hundred and thirty-five unique ESTs that are differentially regulated by at least two-fold in watermelon fruits during the early, ripening, or mature stage when compared to leaf. Of the 335 ESTs identified, 211 share significant homology with known gene products and 96 had no significant matches with any database accession. Of the modulated watermelon ESTs related to annotated genes, a significant number were found to be associated with or involved in the vascular system, carotenoid biosynthesis, transcriptional regulation, pathogen and stress response, and ethylene biosynthesis. Ethylene bioassays, performed with a closely related watermelon genotype with a similar phenotype, i.e. seeded, bright red flesh, dark green rind, etc., determined that ethylene levels were highest during the green fruit stage followed by a decrease during the white and pink fruit stages. Additionally, quantitative Real-Time PCR was used to validate modulation of 127 ESTs that were differentially expressed in developing and ripening fruits based on array analysis. Conclusion This study identified numerous ESTs with putative involvement in the watermelon fruit developmental and ripening process, in particular the involvement of the vascular system and ethylene. The production of ethylene during fruit development in watermelon gives further support to the role of ethylene in fruit development in non-climacteric fruits. PMID:18534026

Benefits of mass customized products: moderating role of product involvement and fashion innovativeness.

PubMed

Park, Minjung; Yoo, Jungmin

2018-02-01

The objective of this study was to explore impacts and benefits of mass customized products on emotional product attachment, favorable attitudes toward a mass customization program, and the ongoing effect on loyalty intentions. This study further investigated how benefits, attachment, attitudes, and loyalty intentions differed as a function of involvement and fashion innovativeness. 290 female online shoppers in South Korea participated in an online survey. Results of this study revealed that perceived benefits positively influenced emotional product attachment and attitudes toward a mass customization program. In addition, attachment positively influenced attitudes, which in turn affected loyalty intentions. This study also found that benefits, attachment, attitudes, and loyalty intentions were all higher in highly involved consumers (high fashion innovators) than those in less involved consumers (low fashion innovators). This study concludes with theoretical and practical implications for mass customization programs.

Modeling Production Plant Forming Processes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rhee, M; Becker, R; Couch, R

2004-09-22

Engineering has simulation tools and experience in modeling forming processes. Y-12 personnel have expressed interest in validating our tools and experience against their manufacturing process activities such as rolling, casting, and forging etc. We have demonstrated numerical capabilities in a collaborative DOE/OIT project with ALCOA that is nearing successful completion. The goal was to use ALE3D to model Alcoa's slab rolling process in order to demonstrate a computational tool that would allow Alcoa to define a rolling schedule that would minimize the probability of ingot fracture, thus reducing waste and energy consumption. It is intended to lead to long-term collaborationmore » with Y-12 and perhaps involvement with other components of the weapons production complex. Using simulations to aid in design of forming processes can: decrease time to production; reduce forming trials and associated expenses; and guide development of products with greater uniformity and less scrap.« less

Hydrogen production from coal using a nuclear heat source

NASA Technical Reports Server (NTRS)

Quade, R. N.

1976-01-01

A strong candidate for hydrogen production in the intermediate time frame of 1985 to 1995 is a coal-based process using a high-temperature gas-cooled reactor (HTGR) as a heat source. Expected process efficiencies in the range of 60 to 70% are considerably higher than all other hydrogen production processes except steam reforming of a natural gas. The process involves the preparation of a coal liquid, hydrogasification of that liquid, and steam reforming of the resulting gaseous or light liquid product. A study showing process efficiency and cost of hydrogen vs nuclear reactor core outlet temperature has been completed, and shows diminishing returns at process temperatures above about 1500 F. A possible scenario combining the relatively abundant and low-cost Western coal deposits with the Gulf Coast hydrogen users is presented which provides high-energy density transportation utilizing coal liquids and uranium.

Efficacy of the RADPAD protective drape during real world complex percutaneous coronary intervention procedures.

PubMed

Murphy, John C; Darragh, Karen; Walsh, Simon J; Hanratty, Colm G

2011-11-15

The RADPAD is a lead-free surgical drape containing bismuth and barium that has been demonstrated to reduce scatter radiation exposure to primary operators during fluoroscopic procedures. It is not known to what degree the RADPAD reduces radiation exposure in operators who perform highly complex percutaneous coronary intervention (PCI) requiring prolonged fluoroscopic screening times. Sixty consecutive patients due to undergo elective complex PCI involving rotational atherectomy, multivessel PCI, or chronic total occlusions were randomized in a 1:1 pattern to have their procedures performed with and without the RADPAD drape in situ. Dosimetry was performed on the left arm of the primary operator. There were 40 cases of chronic total occlusion, including 28 with contralateral injections; 15 cases involving rotational atherectomy; and 5 cases of multivessel PCI. There was no significant difference in screening times or dose-area products between the 2 patient groups. Primary operator radiation dose relative to screening time (RADPAD: slope = 1.44, R² = 0.25; no RADPAD: slope = 4.60, R² = 0.26; analysis of covariance F = 4.81, p = 0.032) and dose-area product (RADPAD: slope = 0.003, R² = 0.26; no RADPAD: slope = 0.011, R² = 0.52; analysis of covariance F = 12.54, p = 0.008) was significantly smaller in the RADPAD cohort compared to the no-RADPAD group. In conclusion, the RADPAD significantly reduces radiation exposure to primary operators during prolonged, complex PCI cases. Copyright © 2011 Elsevier Inc. All rights reserved.

Cosmogenic isotope beryllium-7 in the atmosphere: Production versus transport

NASA Astrophysics Data System (ADS)

Pacini, Alessandra; Usoskin, Ilya; Evangelista, Heitor; Echer, Ezequiel; Mursula, Kalevi; Leppanen, Ari-Pekka

Cosmogenic isotope 7 Be measured near the ground can provide information about its produc-tion (that occurs in the atmosphere due to the interaction of cosmic rays and atmospheric constituents) and its deposition processes (that involves air mass dynamics, stratosphere-troposphere coupling and local climatic conditions). We present the results of an investigation of the atmospheric 7 Be temporal variations at different geographic locations (Finland and Brazil). This study was based on an analysis of three time series of 7 Be concentration measured in near-surface air samples from Rovaniemi and Loviisa (Finland) and Rio de Janeiro (Brazil) for the last decades. We made use of the wavelet spectral method to identify the frequency-temporal features of the 7 Be temporal variations that allowed us to determine the relative importance of production and deposition process for the observed data. By comparing these time series with climatic indices and the values of 7 Be concentration expected from the model for the same period, we found that the climate system is the main driver of the surface isotopic modulation, while the imprints of the production variations are geographically dependent. Thus,7 Be can be considered a good tool to monitor the large-scale air mass dynamics.

DNA-based authentication method for detection of yak (Bos grunniens) in meat products.

PubMed

Wang, Ping; Hu, Yue; Yang, Hairong; Han, Jiangxun; Zhao, Yongsheng; Chen, Ying

2013-01-01

A TaqMan probe real-time PCR method was developed for rapid detection of yak component in raw and cooked meat products. Specific primers and TaqMan probes of yak (Bos grunniens) were designed in the cytochrome b gene. The specificity of the method was evaluated using pure meat of eight yak breeds (Jiulong, Qinghai plateau, Maiwa, Gannan, Bazhou, Sibu, Zhongdian, and Jiali) samples and nine non-Bos grunniens animals (sheep, goat, pig, chicken, cattle, water buffalo, donkey, horse, and rabbit). DNA showed no cross-reaction with non-Bos grunniens animal DNA. This method proved to be sensitive in detecting the presence of low levels of target DNA obtained from 0.001% (w/w) component in a mixed meat sample. The method also successfully identified commercial yak meat products. The results showed that some yak meat might be involved in business fraud by using cattle meat (in this paper, cattle meat means meat of Bos taurus) instead of yak meat. In conclusion, real-time PCR assay used in this study was shown to be a rapid and sensitive method for detection of yak DNA in fresh meat and cooked meat products.

Additive Manufacturing of Tooling for Refrigeration Cabinet Foaming Processes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Post, Brian K; Nuttall, David; Cukier, Michael

The primary objective of this project was to leverage the Big Area Additive Manufacturing (BAAM) process and materials into a long term, quick change tooling concept to drastically reduce product lead and development timelines and costs. Current refrigeration foam molds are complicated to manufacture involving casting several aluminum parts in an approximate shape, machining components of the molds and post fitting and shimming of the parts in an articulated fixture. The total process timeline can take over 6 months. The foaming process is slower than required for production, therefore multiple fixtures, 10 to 27, are required per refrigerator model. Moldsmore » are particular to a specific product configuration making mixed model assembly challenging for sequencing, mold changes or auto changeover features. The initial goal was to create a tool leveraging the ORNL materials and additive process to build a tool in 4 to 6 weeks or less. A secondary goal was to create common fixture cores and provide lightweight fixture sections that could be revised in a very short time to increase equipment flexibility reduce lead times, lower the barriers to first production trials, and reduce tooling costs.« less

Recent developments in high efficient freeze-drying of fruits and vegetables assisted by microwave: A review.

PubMed

Fan, Kai; Zhang, Min; Mujumdar, Arun S

2018-01-10

Microwave heating has been applied in the drying of high-value solids as it affords a number of advantages, including shorter drying time and better product quality. Freeze-drying at cryogenic temperature and extremely low pressure provides the advantage of high product quality, but at very high capital and operating costs due partly to very long drying time. Freeze-drying coupled with a microwave heat source speeds up the drying rate and yields good quality products provided the operating unit is designed and operated to achieve the potential for an absence of hot spot developments. This review is a survey of recent developments in the modeling and experimental results on microwave-assisted freeze-drying (MFD) over the past decade. Owing to the high costs involved, so far all applications are limited to small-scale operations for the drying of high-value foods such as fruits and vegetables. In order to promote industrial-scale applications for a broader range of products further research and development efforts are needed to offset the current limitations of the process. The needs and opportunities for future research and developments are outlined.

Simple and efficient production of embryonic stem cell-embryo chimeras by coculture.

PubMed Central

Wood, S A; Pascoe, W S; Schmidt, C; Kemler, R; Evans, M J; Allen, N D

1993-01-01

A method for the production of embryonic stem (ES) cell-embryo chimeras was developed that involves the simple coculture of eight-cell embryos on a lawn of ES cells. After coculture, the embryos with ES cells attached are transferred to normal embryo culture medium and allowed to develop to the blastocyst stage before reimplantation into foster mothers. Although the ES cells initially attach to the outside of the embryos, they primarily colonize the inner cell mass and its derivatives. This method results in the efficient production of chimeras with high levels of chimerism including the germ line. As embryos are handled en masse and manipulative steps are minimal, this method should greatly reduce the time and effort required to produce chimeric mice. Images Fig. 1 Fig. 2 PMID:8506303

76 FR 34715 - Draft Guidance for Industry; Considering Whether an FDA-Regulated Product Involves the...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-14

... Nanotechnology; Availability AGENCY: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food and... ``Considering Whether an FDA-Regulated Product Involves the Application of Nanotechnology''. This guidance is... nanomaterials or otherwise involve the application of nanotechnology. The points to consider are intended to be...

iTRAQ-based quantitative proteomic analysis reveals potential factors associated with the enhancement of phenazine-1-carboxamide production in Pseudomonas chlororaphis P3

PubMed Central

Jin, Xue-Jie; Peng, Hua-Song; Hu, Hong-Bo; Huang, Xian-Qing; Wang, Wei; Zhang, Xue-Hong

2016-01-01

Phenazine-1-carboxamide (PCN), a phenazine derivative, is strongly antagonistic to fungal phytopathogens. Pseudomonas chlororaphis HT66 is a PCN-producing, non-pathogenic biocontrol strain, and we obtained the mutant P. chlororaphis P3, which produces 4.7 times more PCN than the wild-type HT66 strain. To reveal the cause of PCN production enhancement in P3 and find potential factors related to PCN biosynthesis, an iTRAQ-based quantitative proteomic analysis was used to study the expression changes between the two strains. Of the 452 differentially expressed proteins, most were functionally mapped into PCN biosynthesis pathway or other related metabolisms. The upregulation of proteins, including PhzA/B, PhzD, PhzF, PhzG, and PhzH, involved in PCN biosynthesis was in agreement with the efficient production of PCN in P3. A number of proteins that function primarily in energy production, amino acid metabolism, and secondary metabolism played important roles in PCN biosynthesis. Notably, proteins involved in the uptake and conversion of phosphate, inorganic nitrogen sources, and iron improved the PCN production. Furthermore, the type VI secretion system may participate in the secretion or/and indirect biosynthetic regulation of PCN in P. chlororaphis. This study provides valuable clues to better understand the biosynthesis, excretion and regulation of PCN in Pseudomonas and also provides potential gene targets for further engineering high-yield strains. PMID:27273243

Integrated Analysis of the Transcriptome and Metabolome of Corynebacterium glutamicum during Penicillin-Induced Glutamic Acid Production.

PubMed

Hirasawa, Takashi; Saito, Masaki; Yoshikawa, Katsunori; Furusawa, Chikara; Shmizu, Hiroshi

2018-05-01

Corynebacterium glutamicum is known for its ability to produce glutamic acid and has been utilized for the fermentative production of various amino acids. Glutamic acid production in C. glutamicum is induced by penicillin. In this study, the transcriptome and metabolome of C. glutamicum is analyzed to understand the mechanism of penicillin-induced glutamic acid production. Transcriptomic analysis with DNA microarray revealed that expression of some glycolysis- and TCA cycle-related genes, which include those encoding the enzymes involved in conversion of glucose to 2-oxoglutaric acid, is upregulated after penicillin addition. Meanwhile, expression of some TCA cycle-related genes, encoding the enzymes for conversion of 2-oxoglutaric acid to oxaloacetic acid, and the anaplerotic reactions decreased. In addition, expression of NCgl1221 and odhI, encoding proteins involved in glutamic acid excretion and inhibition of the 2-oxoglutarate dehydrogenase, respectively, is upregulated. Functional category enrichment analysis of genes upregulated and downregulated after penicillin addition revealed that genes for signal transduction systems are enriched among upregulated genes, whereas those for energy production and carbohydrate and amino acid metabolisms are enriched among the downregulated genes. As for the metabolomic analysis using capillary electrophoresis time-of-flight mass spectrometry, the intracellular content of most metabolites of the glycolysis and the TCA cycle decreased dramatically after penicillin addition. Overall, these results indicate that the cellular metabolism and glutamic acid excretion are mainly optimized at the transcription level during penicillin-induced glutamic acid production by C. glutamicum. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Catalytic Activity of the Anaerobic Tyrosine Lyase Required for Thiamine Biosynthesis in Escherichia coli*

PubMed Central

Challand, Martin R.; Martins, Filipa T.; Roach, Peter L.

2010-01-01

Thiazole synthase in Escherichia coli is an αβ heterodimer of ThiG and ThiH. ThiH is a tyrosine lyase that cleaves the Cα–Cβ bond of tyrosine, generating p-cresol as a by-product, to form dehydroglycine. This reactive intermediate acts as one of three substrates for the thiazole cyclization reaction catalyzed by ThiG. ThiH is a radical S-adenosylmethionine (AdoMet) enzyme that utilizes a [4Fe-4S]+ cluster to reductively cleave AdoMet, forming methionine and a 5′-deoxyadenosyl radical. Analysis of the time-dependent formation of the reaction products 5′-deoxyadenosine (DOA) and p-cresol has demonstrated catalytic behavior of the tyrosine lyase. The kinetics of product formation showed a pre-steady state burst phase, and the involvement of DOA in product inhibition was identified by the addition of 5′-methylthioadenosine/S-adenosylhomocysteine nucleosidase to activity assays. This hydrolyzed the DOA and changed the rate-determining step but, in addition, substantially increased the uncoupled turnover of AdoMet. Addition of glyoxylate and ammonium inhibited the tyrosine cleavage reaction, but the reductive cleavage of AdoMet continued in an uncoupled manner. Tyrosine analogues were incubated with ThiGH, which showed a strong preference for phenolic substrates. 4-Hydroxyphenylpropionic acid analogues allowed uncoupled AdoMet cleavage but did not result in further reaction (Cα–Cβ bond cleavage). The results of the substrate analogue studies and the product inhibition can be explained by a mechanistic hypothesis involving two reaction pathways, a product-forming pathway and a futile cycle. PMID:19923213

Morphosyntactic Production and Verbal Working Memory: Evidence From Greek Aphasia and Healthy Aging.

PubMed

Fyndanis, Valantis; Arcara, Giorgio; Christidou, Paraskevi; Caplan, David

2018-05-17

The present work investigated whether verbal working memory (WM) affects morphosyntactic production in configurations that do not involve or favor similarity-based interference and whether WM interacts with verb-related morphosyntactic categories and/or cue-target distance (locality). It also explored whether the findings related to the questions above lend support to a recent account of agrammatic morphosyntactic production: Interpretable Features' Impairment Hypothesis (Fyndanis, Varlokosta, & Tsapkini, 2012). A sentence completion task testing production of subject-verb agreement, tense/time reference, and aspect in local and nonlocal conditions and two verbal WM tasks were administered to 8 Greek-speaking persons with agrammatic aphasia (PWA) and 103 healthy participants. The 3 morphosyntactic categories dissociated in both groups (agreement > tense > aspect). A significant interaction emerged in both groups between the 3 morphosyntactic categories and WM. There was no main effect of locality in either of the 2 groups. At the individual level, all 8 PWA exhibited dissociations between agreement, tense, and aspect, and effects of locality were contradictory. Results suggest that individuals with WM limitations (both PWA and healthy older speakers) show dissociations between the production of verb-related morphosyntactic categories. WM affects performance shaping the pattern of morphosyntactic production (in Greek: subject-verb agreement > tense > aspect). The absence of an effect of locality suggests that executive capacities tapped by WM tasks are involved in morphosyntactic processing of demanding categories even when the cue is adjacent to the target. Results are consistent with the Interpretable Features' Impairment Hypothesis (Fyndanis et al., 2012). https://doi.org/10.23641/asha.6024428.

Free nicotine content and strategic marketing of moist snuff tobacco products in the United States: 2000-2006.

PubMed

Alpert, H R; Koh, H; Connolly, G N

2008-10-01

From 2000 to 2006, moist snuff sales have increased and now account for 71% of the smokeless tobacco market. Previous research has shown that major manufacturers of smokeless tobacco products manipulated free nicotine, the form most readily absorbed, to promote tolerance and addiction. This study examines the possibility that company-specific and brand-specific strategies of the major moist snuff manufacturers involve controlling free nicotine content and ease of dosing with products that are designed and targeted to specific groups. This study looks at the current total US moist snuff market with product design data from the Massachusetts Department of Public Health; moist snuff use from the National Survey on Drug Use and Health; market data from ACNielsen; and magazine advertising expenditures from TNS Media Intelligence. (1) The levels of free nicotine of moist snuff products have increased over time for several major manufacturers; (2) the number and variety of sub-brands have increased over time; (3) changes in design, as reflected by variation in free nicotine associated with pH or tobacco leaf, or both, have enhanced the ease and uniformity of dosing; (4) marketing through price and advertising has increased; and (5) youth use has increased. A combination of factors including brand proliferation, control of free nicotine and product design has most likely resulted in the expanded consumption of moist snuff, particularly among young people.

Insecticide discovery: an evaluation and analysis.

PubMed

Sparks, Thomas C

2013-09-01

There is an on-going need for the discovery and development of new insecticides due to the loss of existing products through the development of resistance, the desire for products with more favorable environmental and toxicological profiles, shifting pest spectrums, and changing agricultural practices. Since 1960, the number of research-based companies in the US and Europe involved in the discovery of new insecticidal chemistries has been declining. In part this is a reflection of the increasing costs of the discovery and development of new pesticides. Likewise, the number of compounds that need to be screened for every product developed has, until recently, been climbing. In the past two decades the agrochemical industry has been able to develop a range of new products that have more favorable mammalian vs. insect selectivity. This review provides an analysis of the time required for the discovery, or more correctly the building process, for a wide range of insecticides developed during the last 60 years. An examination of the data around the time requirements for the discovery of products based on external patents, prior internal products, or entirely new chemistry provides some unexpected observations. In light of the increasing costs of discovery and development, coupled with fewer companies willing or able to make the investment, insecticide resistance management takes on greater importance as a means to preserve existing and new insecticides. Copyright © 2013 Elsevier Inc. All rights reserved.

Application of the airborne ocean color imager for commercial fishing

NASA Technical Reports Server (NTRS)

Wrigley, Robert C.

1993-01-01

The objective of the investigation was to develop a commercial remote sensing system for providing near-real-time data (within one day) in support of commercial fishing operations. The Airborne Ocean Color Imager (AOCI) had been built for NASA by Daedalus Enterprises, Inc., but it needed certain improvements, data processing software, and a delivery system to make it into a commercial system for fisheries. Two products were developed to support this effort: the AOCI with its associated processing system and an information service for both commercial and recreational fisheries to be created by Spectro Scan, Inc. The investigation achieved all technical objectives: improving the AOCI, creating software for atmospheric correction and bio-optical output products, georeferencing the output products, and creating a delivery system to get those products into the hands of commercial and recreational fishermen in near-real-time. The first set of business objectives involved Daedalus Enterprises and also were achieved: they have an improved AOCI and new data processing software with a set of example data products for fisheries applications to show their customers. Daedalus' marketing activities showed the need for simplification of the product for fisheries, but they successfully marketed the current version to an Italian consortium. The second set of business objectives tasked Spectro Scan to provide an information service and they could not be achieved because Spectro Scan was unable to obtain necessary venture capital to start up operations.

Climate impact of beef: an analysis considering multiple time scales and production methods without use of global warming potentials

NASA Astrophysics Data System (ADS)

Pierrehumbert, R. T.; Eshel, G.

2015-08-01

An analysis of the climate impact of various forms of beef production is carried out, with a particular eye to the comparison between systems relying primarily on grasses grown in pasture (‘grass-fed’ or ‘pastured’ beef) and systems involving substantial use of manufactured feed requiring significant external inputs in the form of synthetic fertilizer and mechanized agriculture (‘feedlot’ beef). The climate impact is evaluated without employing metrics such as {{CO}}2{{e}} or global warming potentials. The analysis evaluates the impact at all time scales out to 1000 years. It is concluded that certain forms of pastured beef production have substantially lower climate impact than feedlot systems. However, pastured systems that require significant synthetic fertilization, inputs from supplemental feed, or deforestation to create pasture, have substantially greater climate impact at all time scales than the feedlot and dairy-associated systems analyzed. Even the best pastured system analyzed has enough climate impact to justify efforts to limit future growth of beef production, which in any event would be necessary if climate and other ecological concerns were met by a transition to primarily pasture-based systems. Alternate mitigation options are discussed, but barring unforseen technological breakthroughs worldwide consumption at current North American per capita rates appears incompatible with a 2 °C warming target.

"Clean, green and ethical" animal production. Case study: reproductive efficiency in small ruminants.

PubMed

Martin, Graeme B; Kadokawa, Hiroya

2006-02-01

In response to changes in society and thus the marketplace, we need a vision for the future of our animal industries, including both on-farm and off-farm activities, that is "clean, green and ethical". Using small ruminants as a case study, we describe three "clean, green and ethical" strategies that farmers could use to improve reproductive performance. The first allows control of the timing of reproductive events by using socio-sexual signals (the "male effect") to induce synchronised ovulation in females. The second strategy, "focus feeding", is based on using short periods of nutritional supplements that are precisely timed and specifically designed for each event in the reproductive process (eg, gamete production, embryo survival, fetal programming, colostrum production). The third strategy aims to maximize offspring survival by a combination of management, nutrition and genetic selection for behaviour (temperament). All of these approaches involve non-pharmacological manipulation of the endogenous control systems of the animals and complement the detailed information from ultrasound that is now becoming available. Importantly, these approaches all have a solid foundation in reproductive biology. In several cases, they are currently used in commercial practice, but there is still room for improvement through both basic and applied research. Ultimately, these "clean, green and ethical" tools can be cost-effective, increase productivity and, at the same time, greatly improve the image of meat and milk industries in society and the marketplace.

Evaluation and simultaneous optimization of bio-hydrogen production using 3 2 factorial design and the desirability function

NASA Astrophysics Data System (ADS)

Cuetos, M. J.; Gómez, X.; Escapa, A.; Morán, A.

Various mixtures incorporating a simulated organic fraction of municipal solid wastes and blood from a poultry slaughterhouse were used as substrate in a dark fermentation process for the production of hydrogen. The individual and interactive effects of hydraulic retention time (HRT), solid content in the feed (%TS) and proportion of residues (%Blood) on bio-hydrogen production were studied in this work. A central composite design and response surface methodology were employed to determine the optimum conditions for the hydrogen production process. Experimental results were approximated to a second-order model with the principal effects of the three factors considered being statistically significant (P < 0.05). The production of hydrogen obtained from the experimental point at conditions close to best operability was 0.97 L Lr -1 day -1. Moreover, a desirability function was employed in order to optimize the process when a second, methanogenic, phase is coupled with it. In this last case, the optimum conditions lead to a reduction in the production of hydrogen when the optimization process involves the maximization of intermediary products.

Flutter optimization in fighter aircraft design

NASA Technical Reports Server (NTRS)

Triplett, W. E.

1984-01-01

The efficient design of aircraft structure involves a series of compromises among various engineering disciplines. These compromises are necessary to ensure the best overall design. To effectively reconcile the various technical constraints requires a number of design iterations, with the accompanying long elapsed time. Automated procedures can reduce the elapsed time, improve productivity and hold the promise of optimum designs which may be missed by batch processing. Several examples are given of optimization applications including aeroelastic constraints. Particular attention is given to the success or failure of each example and the lessons learned. The specific applications are shown. The final two applications were made recently.

Numerical grid generation in computational field simulations. Volume 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Soni, B.K.; Thompson, J.F.; Haeuser, J.

1996-12-31

To enhance the CFS technology to its next level of applicability (i.e., to create acceptance of CFS in an integrated product and process development involving multidisciplinary optimization) the basic requirements are: rapid turn-around time, reliable and accurate simulation, affordability and appropriate linkage to other engineering disciplines. In response to this demand, there has been a considerable growth in the grid generation related research activities involving automization, parallel processing, linkage with the CAD-CAM systems, CFS with dynamic motion and moving boundaries, strategies and algorithms associated with multi-block structured, unstructured, hybrid, hexahedral, and Cartesian grids, along with its applicability to various disciplinesmore » including biomedical, semiconductor, geophysical, ocean modeling, and multidisciplinary optimization.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yang, Jiayue; Zhang, Dong; Chen, Zhen

The vibrationally excited reaction of F + CHD{sub 3}(ν{sub 1} = 1) → DF + CHD{sub 2} at a collision energy of 9.0 kcal/mol is investigated using the crossed-beams and time-sliced velocity map imaging techniques. Detailed and quantitative information of the CH stretching excitation effects on the reactivity and dynamics of the title reaction is extracted with the help of an accurate determination of the fraction of the excited CHD{sub 3} reagent in the crossed-beam region. It is found that all vibrational states of the CHD{sub 2} products observed in the ground-state reaction, which mainly involve the excitation of themore » umbrella mode of the CHD{sub 2} products, are severely suppressed by the CH stretching excitation. However, there are four additional vibrational states of the CHD{sub 2} products appearing in the excited-state reaction which are not presented in the ground-state reaction. These vibrational states either have the CH stretching excitation retained or involve one quantum excitation in the CH stretching and the excitation of the umbrella mode. Including all observed vibrational states, the overall cross section of the excited-state reaction is estimated to be 66.6% of that of the ground-state one. Experimental results also show that when the energy of CH stretching excitation is released during the reaction, it is deposited almost exclusively as the rovibrational energy of the DF products, with little portion in the translational degree of freedom. For vibrational states of the CHD{sub 2} products observed in both ground- and excited-state reactions, the CH stretching excitation greatly suppresses the forward scattered products, causing a noticeable change in the product angular distributions.« less

Characterization of comQ and comX, Two Genes Required for Production of ComX Pheromone in Bacillus subtilis

PubMed Central

Schneider, Katherine Bacon; Palmer, Tanya M.; Grossman, Alan D.

2002-01-01

Many microbes use secreted peptide-signaling molecules to stimulate changes in gene expression in response to high population density, a process called quorum sensing. ComX pheromone is a modified 10-amino-acid peptide used by Bacillus subtilis to modulate changes in gene expression in response to crowding. comQ and comX are required for production of ComX pheromone. We found that accumulation of ComX pheromone in culture supernatant paralleled cell growth, indicating that there was no autoinduction of production of ComX pheromone. We overexpressed comQ and comX separately and together and found that overexpression of comX alone was sufficient to cause an increase in production of ComX pheromone and early induction of a quorum-responsive promoter. These results indicate that the extracellular concentration of ComX pheromone plays a major role in determining the timing of the quorum response and that expression of comX is limiting for production of ComX pheromone. We made alanine substitutions in the residues that comprise the peptide backbone of ComX pheromone. Analysis of these mutants highlighted the importance of the modification for ComX pheromone function and identified three residues (T50, G54, and D55) that are unlikely to interact with proteins involved in production of or response to ComX pheromone. We have also identified and mutated a putative isoprenoid binding domain of ComQ. Mutations in this domain eliminated production of ComX pheromone, consistent with the hypothesis that ComQ is involved in modifying ComX pheromone and that the modification is likely to be an isoprenoid. PMID:11751817

Rapid fingerprinting of spilled petroleum products using fluorescence spectroscopy coupled with parallel factor and principal component analysis.

PubMed

Mirnaghi, Fatemeh S; Soucy, Nicholas; Hollebone, Bruce P; Brown, Carl E

2018-05-19

The characterization of spilled petroleum products in an oil spill is necessary for identifying the spill source, selection of clean-up strategies, and evaluating potential environmental and ecological impacts. Existing standard methods for the chemical characterization of spilled oils are time-consuming due to the lengthy sample preparation for analysis. The main objective of this study is the development of a rapid screening method for the fingerprinting of spilled petroleum products using excitation/emission matrix (EEM) fluorescence spectroscopy, thereby delivering a preliminary evaluation of the petroleum products within hours after a spill. In addition, the developed model can be used for monitoring the changes of aromatic compositions of known spilled oils over time. This study involves establishing a fingerprinting model based on the composition of polycyclic and heterocyclic aromatic hydrocarbons (PAH and HAHs, respectively) of 130 petroleum products at different states of evaporative weathering. The screening model was developed using parallel factor analysis (PARAFAC) of a large EEM dataset. The significant fluorescing components for each sample class were determined. After which, through principal component analysis (PCA), the variation of scores of their modeled factors was discriminated based on the different classes of petroleum products. This model was then validated using gas chromatography-mass spectrometry (GC-MS) analysis. The rapid fingerprinting and the identification of unknown and new spilled oils occurs through matching the spilled product with the products of the developed model. Finally, it was shown that HAH compounds in asphaltene and resins contribute to ≥4-ring PAHs compounds in petroleum products. Copyright © 2018. Published by Elsevier Ltd.

Postprandial glycaemic response: how is it influenced by characteristics of cereal products?

PubMed

Meynier, Alexandra; Goux, Aurélie; Atkinson, Fiona; Brack, Olivier; Vinoy, Sophie

2015-06-28

Cereal products exhibit a wide range of glycaemic indexes (GI), but the interaction of their different nutrients and starch digestibility on blood glucose response is not well known. The objective of this analysis was to evaluate how cereal product characteristics can contribute to GI and insulinaemic index and to the parameters describing glycaemic or insulinaemic responses (incremental AUC, maximum concentration and Δpeak). Moreover, interactions between the different cereal products characteristics and glycaemic response parameters were assessed for the first time. Relationships between the cereal products characteristics and the glycaemic response were analysed by partial least square regressions, followed by modelling. A database including 190 cereal products tested by the usual GI methodology was used. The model on glycaemic responses showed that slowly digestible starch (SDS), rapidly digestible starch (RDS) and fat and fibres, and several interactions involving them, significantly explain GI by 53 % and Δpeak of glycaemia by 60 %. Fat and fibres had important contributions to glycaemic response at low and medium SDS contents in cereal products, but this effect disappears at high SDS levels. We showed also for the first time that glycaemic response parameters are dependent on interactions between starch digestibility (interaction between SDS and RDS) and nutritional composition (interaction between fat and fibres) of the cereal products. We also demonstrated the non-linear effect of fat and fibres (significant effect of their quadratic terms). Hence, optimising both the formula and the manufacturing process of cereal products can improve glucose metabolism, which is recognised as strongly influential on human health.

Simulation and Validation of Injection-Compression Filling Stage of Liquid Moulding with Fast Curing Resins

NASA Astrophysics Data System (ADS)

Martin, Ffion A.; Warrior, Nicholas A.; Simacek, Pavel; Advani, Suresh; Hughes, Adrian; Darlington, Roger; Senan, Eissa

2018-03-01

Very short manufacture cycle times are required if continuous carbon fibre and epoxy composite components are to be economically viable solutions for high volume composite production for the automotive industry. Here, a manufacturing process variant of resin transfer moulding (RTM), targets a reduction of in-mould manufacture time by reducing the time to inject and cure components. The process involves two stages; resin injection followed by compression. A flow simulation methodology using an RTM solver for the process has been developed. This paper compares the simulation prediction to experiments performed using industrial equipment. The issues encountered during the manufacturing are included in the simulation and their sensitivity to the process is explored.

Organizational management practices for achieving software process improvement

NASA Technical Reports Server (NTRS)

Kandt, Ronald Kirk

2004-01-01

The crisis in developing software has been known for over thirty years. Problems that existed in developing software in the early days of computing still exist today. These problems include the delivery of low-quality products, actual development costs that exceed expected development costs, and actual development time that exceeds expected development time. Several solutions have been offered to overcome out inability to deliver high-quality software, on-time and within budget. One of these solutions involves software process improvement. However, such efforts often fail because of organizational management issues. This paper discusses business practices that organizations should follow to improve their chances of initiating and sustaining successful software process improvement efforts.

Early and Late Trisporoids Differentially Regulate β-Carotene Production and Gene Transcript Levels in the Mucoralean Fungi Blakeslea trispora and Mucor mucedo

PubMed Central

Sahadevan, Yamuna; Richter-Fecken, Mareike; Kaerger, Kerstin; Voigt, Kerstin

2013-01-01

The multistep cleavage of carotenoids in Mucorales during the sexual phase results in a cocktail of trisporic acid (C18) sex pheromones. We hypothesized that the C18 trisporoid intermediates have a specific regulatory function for sex pheromone production and carotenogenesis that varies with genus/species and vegetative and sexual phases of their life cycles. Real-time quantitative PCR kinetics determined for Blakeslea trispora displayed a very high transcript turnover in the gene for carotenoid cleavage dioxygenase, tsp3, during the sexual phase. An in vivo enzyme assay and chromatographic analysis led to the identification of β-apo-12′-carotenal as the first apocarotenoid involved in trisporic acid biosynthesis in B. trispora. Supplementation of C18 trisporoids, namely D'orenone, methyl trisporate C, and trisporin C, increased tsp3 transcripts in the plus compared to minus partners. Interestingly, the tsp1 gene, which is involved in trisporic acid biosynthesis, was downregulated compared to tsp3 irrespective of asexual or sexual phase. Only the minus partners of both B. trispora and Mucor mucedo had enhanced β-carotene production after treatment with C20 apocarotenoids, 15 different trisporoids, and their analogues. We conclude that the apocarotenoids and trisporoids influence gene transcription and metabolite production, depending upon the fungal strain, corresponding genus, and developmental phase, representing a “chemical dialect” during sexual communication. PMID:24056470

Diel variability of mercury phase and species distributions in the Florida Everglades

USGS Publications Warehouse

Krabbenhoft, D.P.; Hurley, J.P.; Olson, M.L.; Cleckner, L.B.

1998-01-01

Preliminary studies of mercury (Hg) cycling in the Everglades revealed that dissolved gaseous mercury (DGM), total mercury (Hg(T)), and reactive mercury (Hg(R)) show reproducible, diel trends. Peak water-column DGM concentrations were observed on or about noon, with a 3 to 7 fold increase over night-time concentrations. Production of DGM appears to cease during dark periods, with nearly constant water column concentrations that were at or near saturation with respect to the overlying air. A simple mass balance shows that the flux of Hg to the atmosphere from diel DGM production and evasion represents about 10% of the annual input from atmospheric deposition. Production of DGM is likely the result of an indirect photolysis reaction that involves the production of reductive species and/or reduction by electron transfer. Diel variability in Hg(T) and Hg(R) appears to be controlled by two factors: inputs from rainfall and photolytic sorption/desorption processes. A possible mechanism involves photolysis of chromophores on the surface of a solid substrate (e.g., the periphyton mat) giving rise to destabilization of sorbed mercury and net desorption during daylight. At night, the sorption reactions predominate and the water-column Hg(T) decreases. Methylmercury (MeHg) also showed diel trends in concentration but were not clearly linked to the solar cycle or rainfall at the study site.

Introducing the productive operating theatre programme in urology theatre suites.

PubMed

Ahmed, Kamran; Khan, Nuzhath; Anderson, Deirdre; Watkiss, Jonathan; Challacombe, Ben; Khan, Mohammed Shamim; Dasgupta, Prokar; Cahill, Declan

2013-01-01

The Productive Operating Theatre (TPOT) is a theatre improvement programme designed by the UK National Health Service. The aim of this study was to evaluate the implementation of TPOT in urology operating theatres and identify obstacles to running an ideal operating list. TPOT was introduced in two urology operating theatres in September 2010. A multidisciplinary team identified and audited obstacles to the running of an ideal operating list. A brief/debrief system was introduced and patient satisfaction was recorded via a structured questionnaire. The primary outcome measure was the effect of TPOT on start and overrun times. Start times: 39-41% increase in operating lists starting on time from September 2010 to June 2011, involving 1,365 cases. Overrun times: Declined by 832 min between March 2010 and March 2011. The cost of monthly overrun decreased from September 2010 to June 2011 by GBP 510-3,030. Patient experience: A high degree of satisfaction regarding level of care (77%), staff hygiene (71%) and information provided (72%), while negative comments regarding staff shortages and environment/facilities were recorded. TPOT has helped identify key obstacles and shown improvements in efficiency measures such as start/overrun times. Copyright © 2013 S. Karger AG, Basel.

Cortisol production patterns in young children living with birth parents vs children placed in foster care following involvement of Child Protective Services.

PubMed

Bernard, Kristin; Butzin-Dozier, Zachary; Rittenhouse, Joseph; Dozier, Mary

2010-05-01

To examine differences in waking to bedtime cortisol production between children who remained with birth parents vs children placed in foster care following involvement of Child Protective Services (CPS). Between-subject comparison of cortisol patterns among 2 groups of children. Children referred from the child welfare system. Three hundred thirty-nine children aged 2.9 to 31.4 months who were living with birth parents (n = 155) or placed in foster care (n = 184) following CPS involvement as well as 96 unmatched children from low-risk environments. Main Exposures Involvement by CPS and foster care. Main Outcome Measure Salivary cortisol samples obtained at waking and bedtime for children on 2 days. Child Protective Services-involved children who continued to live with birth parents and CPS-involved children placed in foster care differed in cortisol production, with children living with their birth parents showing flatter slopes in waking to bedtime values. Continuing to live with birth parents following involvement of CPS is associated with greater perturbation to the diurnal pattern of cortisol production than living with foster parents. Foster care may have a regulating influence on children's cortisol among children who have experienced maltreatment.

"Seeing" the Difference: The Importance of Visibility and Action as a Mark of "Authenticity" in Co-production

PubMed Central

Cooke, Jo; Langley, Joe; Wolstenholme, Dan; Hampshaw, Susan

2017-01-01

The Rycroft-Malone paper states that co-production relies on ‘authentic’ collaboration as a context for action. Our commentary supports and extends this assertion. We suggest that ‘authentic’ co-production involves processes where participants can ‘see’ the difference that they have made within the project and beyond. We provide examples including: the use of design in health projects which seek to address power issues and make contributions visible through iteration and prototyping; and the development of ‘actionable outputs’ from research that are the physical embodiment of co-production. Finally, we highlight the elements of the Collaboration for Leadership in Applied Health Research and Care (CLAHRC) architecture that enables the inclusion of such collaborative techniques that demonstrate visible co-production. We reinforce the notion that maintaining collaboration requires time, flexible resources, blurring of knowledge producer-user boundaries, and leaders who promote epistemological tolerance and methodological exploration. PMID:28812827

Characterization and quantitation of polyolefin microplastics in personal-care products using high-temperature gel-permeation chromatography.

PubMed

Hintersteiner, Ingrid; Himmelsbach, Markus; Buchberger, Wolfgang W

2015-02-01

In recent years, the development of reliable methods for the quantitation of microplastics in different samples, including evaluating the particles' adverse effects in the marine environment, has become a great concern. Because polyolefins are the most prevalent type of polymer in personal-care products containing microplastics, this study presents a novel approach for their quantitation. The method is suitable for aqueous and hydrocarbon-based products, and includes a rapid sample clean-up involving twofold density separation and a subsequent quantitation with high-temperature gel-permeation chromatography. In contrast with previous procedures, both errors caused by weighing after insufficient separation of plastics and matrix and time-consuming visual sorting are avoided. In addition to reliable quantitative results, in this investigation a comprehensive characterization of the polymer particles isolated from the product matrix, covering size, shape, molecular weight distribution and stabilization, is provided. Results for seven different personal-care products are presented. Recoveries of this method were in the range of 92-96 %.

Case history of Yakin field: its development and sand control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sawolo, N.; Krueger, R.F.; Maly, G.P.

1983-01-01

This paper deals with the development of the Yakin field in East Kalimantan, Indonesia, with emphasis on the sand control methods used. Implementation of an effective sand control program ensured the successful development of this field. Gravel-packed wells had substantially lower production decline rates than the initial completions without gravel packs. Control of sand production also has been demonstrated by the lack of sand problems during the 4 1/2 years since the sand control program was initiated. During this time there have been no submersible pump failures associated with sand production. The successful sand control program was achieved by amore » well-coordinated and cooperative effort of drilling, reservoir engineering, production research, and service company personnel. Establishment of communication among all people involved, starting early in the planning process and continuing through the rig operations to the final production phase, coupled with intensive training at all levels of responsibility, on-site supervision, and quality control were important factors in the success of the development program.« less

Prehospital Blood Product Administration Opportunities in Ground Transport ALS EMS - A Descriptive Study.

PubMed

Mix, Felicia M; Zielinski, Martin D; Myers, Lucas A; Berns, Kathy S; Luke, Anurahda; Stubbs, James R; Zietlow, Scott P; Jenkins, Donald H; Sztajnkrycer, Matthew D

2018-06-01

IntroductionHemorrhage remains the major cause of preventable death after trauma. Recent data suggest that earlier blood product administration may improve outcomes. The purpose of this study was to determine whether opportunities exist for blood product transfusion by ground Emergency Medical Services (EMS). This was a single EMS agency retrospective study of ground and helicopter responses from January 1, 2011 through December 31, 2015 for adult trauma patients transported from the scene of injury who met predetermined hemodynamic (HD) parameters for potential transfusion (heart rate [HR]≥120 and/or systolic blood pressure [SBP]≤90). A total of 7,900 scene trauma ground transports occurred during the study period. Of 420 patients meeting HD criteria for transfusion, 53 (12.6%) had a significant mechanism of injury (MOI). Outcome data were available for 51 patients; 17 received blood products during their emergency department (ED) resuscitation. The percentage of patients receiving blood products based upon HD criteria ranged from 1.0% (HR) to 5.9% (SBP) to 38.1% (HR+SBP). In all, 74 Helicopter EMS (HEMS) transports met HD criteria for blood transfusion, of which, 28 patients received prehospital blood transfusion. Statistically significant total patient care time differences were noted for both the HR and the SBP cohorts, with HEMS having longer time intervals; no statistically significant difference in mean total patient care time was noted in the HR+SBP cohort. In this study population, HD parameters alone did not predict need for ED blood product administration. Despite longer transport times, only one-third of HEMS patients meeting HD criteria for blood administration received prehospital transfusion. While one-third of ground Advanced Life Support (ALS) transport patients manifesting HD compromise received blood products in the ED, this represented 0.2% of total trauma transports over the study period. Given complex logistical issues involved in prehospital blood product administration, opportunities for ground administration appear limited within the described system. MixFM, ZielinskiMD, MyersLA, BernsKS, LukeA, StubbsJR, ZietlowSP, JenkinsDH, SztajnkrycerMD. Prehospital blood product administration opportunities in ground transport ALS EMS - a descriptive study. Prehosp Disaster Med. 2018;33(3):230-236.

Operational space weather product development and validation at the joint SMC-AFRL Rapid Prototyping Center

NASA Astrophysics Data System (ADS)

Quigley, S.

The Air Force Research Laboratory (AFRL/VSB) and Detachment 11, Space &Missile Systems Center (SMC, Det 11/CIT) have combined efforts to design, develop, test, and implement graphical products for the Air Force's space weather operations center. These products are generated to analyze, specify, and forecast the effects of the near-earth space environment on Department of Defense systems and communications. Jointly-developed products that have been, or will soon be added to real-time operations include: 1) the Operational Space Environment Network Display (OpSEND) suit - a set of four products that address HF communication, UHF satellite communication scintillation, radar auroral clutter, and GP S single- frequency errors; 2) a solar radio background and burst effects (SoRBE) product suite; and C) a meteor effects (ME) product suite. The RPC is also involved in a rather substantial "V&V" effort to produce multiple operational product verifications and validations, with an added end goal of a generalized validation software package. The presentation will provide a general overview of the RPC and each of the products mentioned above, to include background science, operational history, inputs, outputs, dissemination, and customer uses for each.

Effect of Streamflow Forecast Uncertainty on Real-Time Reservoir Operation

NASA Astrophysics Data System (ADS)

Zhao, T.; Cai, X.; Yang, D.

2010-12-01

Various hydrological forecast products have been applied to real-time reservoir operation, including deterministic streamflow forecast (DSF), DSF-based probabilistic streamflow forecast (DPSF), and ensemble streamflow forecast (ESF), which represent forecast uncertainty in the form of deterministic forecast error, deterministic forecast error-based uncertainty distribution, and ensemble forecast errors, respectively. Compared to previous studies that treat these forecast products as ad hoc inputs for reservoir operation models, this paper attempts to model the uncertainties involved in the various forecast products and explores their effect on real-time reservoir operation decisions. In hydrology, there are various indices reflecting the magnitude of streamflow forecast uncertainty; meanwhile, few models illustrate the forecast uncertainty evolution process. This research introduces Martingale Model of Forecast Evolution (MMFE) from supply chain management and justifies its assumptions for quantifying the evolution of uncertainty in streamflow forecast as time progresses. Based on MMFE, this research simulates the evolution of forecast uncertainty in DSF, DPSF, and ESF, and applies the reservoir operation models (dynamic programming, DP; stochastic dynamic programming, SDP; and standard operation policy, SOP) to assess the effect of different forms of forecast uncertainty on real-time reservoir operation. Through a hypothetical single-objective real-time reservoir operation model, the results illustrate that forecast uncertainty exerts significant effects. Reservoir operation efficiency, as measured by a utility function, decreases as the forecast uncertainty increases. Meanwhile, these effects also depend on the type of forecast product being used. In general, the utility of reservoir operation with ESF is nearly as high as the utility obtained with a perfect forecast; the utilities of DSF and DPSF are similar to each other but not as efficient as ESF. Moreover, streamflow variability and reservoir capacity can change the magnitude of the effects of forecast uncertainty, but not the relative merit of DSF, DPSF, and ESF. Schematic diagram of the increase in forecast uncertainty with forecast lead-time and the dynamic updating property of real-time streamflow forecast

Effects of Breakwater Construction of Tedious Creek Small Craft Harbor and Estuary, Maryland

DTIC Science & Technology

2006-09-01

an area that provides excellent access to many productive fishing grounds in Chesapeake Bay. Tedious Creek Harbor provides anchorage to over 100...vessels involved in commercial and/or recreational fishing . The orientation of Tedious Creek allows the transmission of storm waves that, at times...entering the estuary. Due to the orientation of Tedious Creek to Fishing Bay, storm waves from the northeast, east, and southeast entered the

Immune Response to Electromagnetic Fields through Cybernetic Modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Godina-Nava, J. J.; Segura, M. A. Rodriguez; Cadena, S. Reyes

We study the optimality of the humoral immune response through a mathematical model, which involves the effect of electromagnetic fields over the large lymphocytes proliferation. Are used the so called cybernetic variables in the context of the matching law of microeconomics or mathematical psychology, to measure the large lymphocytes population and to maximize the instantaneous antibody production rate in time during the immunologic response in order to most efficiently inactivate the antigen.

Immune Response to Electromagnetic Fields through Cybernetic Modeling

NASA Astrophysics Data System (ADS)

Godina-Nava, J. J.; Segura, M. A. Rodríguez; Cadena, S. Reyes; Sierra, L. C. Gaitán

2008-08-01

We study the optimality of the humoral immune response through a mathematical model, which involves the effect of electromagnetic fields over the large lymphocytes proliferation. Are used the so called cybernetic variables in the context of the matching law of microeconomics or mathematical psychology, to measure the large lymphocytes population and to maximize the instantaneous antibody production rate in time during the immunologic response in order to most efficiently inactivate the antigen.

JPRS Report, East Europe.

DTIC Science & Technology

1990-01-29

especially those involving consumer would not solve the problem. Only the combined effect electronics and tourism . If today we are selling roughly of...were obtained in most of the No 10, 1989pp 20-29 important industries and branches, as well as in key products of a classic industrial character such as...year it was on the industrial output during the first three postwar decades agenda of the CC CPCZ economic commission, subse- was about 2.5-3 times

Work performed on velocity profiles in a hot jet by simplified RELIEF

NASA Technical Reports Server (NTRS)

Miles, Richard B.; Lempert, Walter R.

1991-01-01

The Raman Excitation + Laser Induced Electronic Fluorescence (RELIEF) velocity measurement method is based on vibrationally tagging oxygen molecules and observing their displacement after a short period of time. Two papers that discuss the use and implementation of the RELIEF technique are presented in this final report. Additionally, the end of the report contains a listing of the personnel involved and the reference documents used in the production of this final report.

Exogenous fatty acids and niacin on acute prostaglandin D2 production in human myeloid cells.

PubMed

Montserrat-de la Paz, Sergio; Bermudez, Beatriz; Lopez, Sergio; Naranjo, Maria C; Romero, Yolanda; Bando-Hidalgo, Maria J; Abia, Rocio; Muriana, Francisco J G

2017-01-01

Niacin activates HCA 2 receptor that results in the release of PGD 2 . However, little is known on PGD 2 -producing cells and the role of fatty acids. Notably M-CSF macrophages exhibited a timely dependent PGD 2 production upon niacin challenge. Short pretreatment of M-CSF macrophages with autologous postprandial TRLs induced the down-regulation of HCA 2 gene and up-regulation of genes encoding COX1 and COX2 enzymes in a fatty acid-dependent manner. These effects were paralleled by a higher PGD 2 production with postprandial TRL-SFAs. The niacin-mediated transcriptional activity of all genes involved in PGD 2 biosynthesis was desensitized in a time-dependent manner by postprandial TRLs, leading to a decreased PGD 2 release. In vivo, the net excursions of PGD 2 in plasma followed similar fatty acid-dependent patterns as those found for PGD 2 release in vitro. The predominant fatty acid class in the diet acutely modulates PGD 2 biosynthetic pathway both in vitro and in vivo. Copyright © 2016 Elsevier Inc. All rights reserved.

Plan for compensating full-time physicians involved in medical education.

PubMed

Milad, M P; Hendricks, S K; Williford, L E

1999-04-01

In response to growing financial pressures, many academic institutions have begun rewarding full-time faculty primarily on the basis of productivity. This formula often overrewards procedure-oriented specialists while poorly compensating primary care physicians. Collections have little to do with clinical effort, and rewarding productivity alone ignores the many other qualities important to the academic mission. We developed a simple, adjustable plan for quantifying and rewarding faculty behavior consistent with the goals of the institution. Eight categories are weighed by the departmental chairperson or committee, including previous year's salary, productivity, patient satisfaction, administration, academic rank, teaching, research, and quality of care. This plan is flexible and rewards behavior consistent with departmental priorities. It also allows for individual members of the department to increase their salaries by adjusting their behavior. As federal funds for training continue to decrease, teaching, research, and other scholarly activities might not be fairly compensated. Unless each institution prospectively develops a program that rewards those activities that the institution values, many important scientific and educational activities will be completely replaced by the more tangible efforts of patient care.

Effects of the fluid flows on enzymatic chemical oscillations

NASA Astrophysics Data System (ADS)

Shklyaev, Oleg; Yashin, Victor; Balazs, Anna

2017-11-01

Chemical oscillations are ubiquitous in nature and have a variety of promising applications. Usually, oscillating chemical systems are analyzed within the context of a reaction-diffusion framework. Here, we examine how fluid flows carrying the reactants can be utilized to modulate the negative feedback loops and time delays that promote chemical oscillations. We consider a model where a chemical reaction network involves two species, X and Y, which undergo transformations catalyzed by respective enzymes immobilized at the bottom wall of a fluid-filled microchamber. The reactions with the enzymes provide a negative feedback in the chemically oscillating system. In particular, the first enzyme, localized on the first patch, promotes production of chemical X, while the second enzyme, immobilized on the second patch, promotes production of chemical Y, which inhibits the production of chemical X. The separation distance between the enzyme-coated patches sets the time delay required for the transportation of X and Y. The chemical transport is significantly enhanced if convective fluxes accompany the diffusive ones. Therefore, the parameter region where oscillations are present is modified. The findings provide guidance to designing micro-scale chemical reactors with improved functionalities.

Dissociation and Re-Aggregation of Multicell-Ensheathed Fragments Responsible for Rapid Production of Massive Clumps of Leptothrix Sheaths

PubMed Central

Kunoh, Tatsuki; Nagaoka, Noriyuki; McFarlane, Ian R.; Tamura, Katsunori; El-Naggar, Mohamed Y.; Kunoh, Hitoshi; Takada, Jun

2016-01-01

Species of the Fe/Mn-oxidizing bacteria Leptothrix produce tremendous amounts of microtubular, Fe/Mn-encrusted sheaths within a few days in outwells of groundwater that can rapidly clog water systems. To understand this mode of rapid sheath production and define the timescales involved, behaviors of sheath-forming Leptothrix sp. strain OUMS1 were examined using time-lapse video at the initial stage of sheath formation. OUMS1 formed clumps of tangled sheaths. Electron microscopy confirmed the presence of a thin layer of bacterial exopolymer fibrils around catenulate cells (corresponding to the immature sheath). In time-lapse videos, numerous sheath filaments that extended from the periphery of sheath clumps repeatedly fragmented at the apex of the same fragment, the fragments then aggregated and again elongated, eventually forming a large sheath clump comprising tangled sheaths within two days. In this study, we found that fast microscopic fragmentation, dissociation, re-aggregation and re-elongation events are the basis of the rapid, massive production of Leptothrix sheaths typically observed at macroscopic scales. PMID:27490579

DOE Office of Scientific and Technical Information (OSTI.GOV)

S.K. Kawatra; B. Anamerie; T.C. Eisele

The pig iron nugget process was developed as an alternative to the traditional blast furnace process by Kobe Steel. The process aimed to produce pig iron nuggets, which have similar chemical and physical properties to blast furnace pig iron, in a single step. The pig iron nugget process utilizes coal instead of coke and self reducing and fluxing dried green balls instead of pellets and sinters. In this process the environmental emissions caused by coke and sinter production, and energy lost between pellet induration (heat hardening) and transportation to the blast furnace can be eliminated. The objectives of this researchmore » were to (1) produce pig iron nuggets in the laboratory, (2) characterize the pig iron nugget produced and compare them with blast furnace pig iron, (3) investigate the furnace temperature and residence time effects on the pig iron nugget production, and (4) optimize the operational furnace temperatures and residence times. The experiments involved heat treatment of self reducing and fluxing dried green balls at various furnace temperatures and residence times. Three chemically and physically different products were produced after the compete reduction of iron oxides to iron depending on the operational furnace temperatures and/or residence times. These products were direct reduced iron (DRI), transition direct reduced iron (TDRI), and pig iron nuggets. The increase in the carbon content of the system as a function of furnace temperature and/or residence time dictated the formation of these products. The direct reduced iron, transition direct reduced iron, and pig iron nuggets produced were analyzed for their chemical composition, degree of metallization, apparent density, microstructure and microhardness. In addition, the change in the carbon content of the system with the changing furnace temperature and/or residence time was detected by optical microscopy and Microhardness measurements. The sufficient carbon dissolution required for the production of pig iron nuggets was determined. It was determined that pig iron nuggets produced had a high apparent density (6.7-7.2 gr/cm3), highly metallized, slag free structure, high iron content (95-97%), high microhardness values (> 325 HVN) and microstructure similar to white cast iron. These properties made them a competitive alternative to blast furnace pig iron.« less

Effects of Copper on Hemocyte Apoptosis, ROS Production, and Gene Expression in White Shrimp Litopenaeus vannamei.

PubMed

Guo, Hui; Li, Kexu; Wang, Wei; Wang, Chenggui; Shen, Yuchun

2017-10-01

Copper, a common chemical contaminant in aquatic environment, is known to be toxic to aquatic life at high concentrations. In the present study, we evaluated the apoptotic cell ratio and ROS production in hemocytes of the white shrimp Litopenaeus vannamei exposed to 1 or 5 mg L -1 Cu for 0, 3, 6, 12, 24, and 48 h. The expression changes of antioxidant biomarker genes, i.e., copper-zinc superoxide dismutase (Cu-Zn SOD) and catalase (CAT), apoptosis-related genes, i.e., caspase-3 and inhibitor of apoptosis protein (IAP), and a specific biomarker gene of heavy metal pollution, i.e., metallothionein (MT), were also determined in hemocytes. Significant increases in ROS production were observed in both treatment groups at each time points. The apoptotic cell ratios were significantly increased at 6-48 h among shrimp exposed to 1 mg L -1 Cu and at each time points in 5 mg L -1 Cu group. These results indicated that Cu would induce oxidative stress and apoptosis in the hemocyte of L. vannamei. Quantitative real-time PCR analysis revealed that the relative expression levels of Cu-Zn SOD, CAT, caspase-3, IAP, and MT were upregulated in a dose-dependent and time-dependent manner, suggesting the involvement of these genes in stress response against Cu exposure.

Patterns of activity and use of time in rural Bangladesh: class, gender, and seasonal variations.

PubMed

Zaman, H

1995-04-01

Tarapur is a village in the district of Rajshahi, Bangladesh, covering an area of 821.05 acres. 342 households with a total population of 1981 were identified in the village by the 1985 census. The author investigated the use of time during 1984 and 1985 in busy, intermediate, and slack seasons among the village population to examine the variation in time use by gender and social class. Activity patterns were found to vary from one season to another, and also across social classes. The study highlights the need to refine some of the conceptual and methodological issues in the collection of data on women and work. The study also presents useful data on home-based production and market-oriented work. It could be useful to adopt an anthropological approach in order to understand the allocation of time by men and women from the perspective of household production and the local economy and culture. Study findings focus upon the following policy issues: the need for a better understanding and recognition of the significant role of women in field agriculture and postharvest processing, creation of further nontraditional employment and business opportunities for poor women in rural areas, and consciousness-raising and the challenge of cultural barriers affecting women. Rural women, especially those in need of employment and involved in market-oriented production, should be the target of mainstream development activities in future planning.

Employee Involvement, Attitudes, and Productivity in High Technology Manufacturing: A Two-Year, Experimental Study.

ERIC Educational Resources Information Center

Stinnett, William D.; And Others

To investigate methods of improving both employees' productivity and the quality of their work life, workers from four businesses were surveyed before and after their organizations implemented a total employees involvement program. Survey questions covered employees' perceptions of (1) the quality of the product produced, (2) the leadership's…

A Neuroimaging Study of Premotor Lateralization and Cerebellar Involvement in the Production of Phonemes and Syllables

ERIC Educational Resources Information Center

Ghosh, Satrajit S.; Tourville, Jason A.; Guenther, Frank H.

2008-01-01

Purpose: This study investigated the network of brain regions involved in overt production of vowels, monosyllables, and bisyllables to test hypotheses derived from the Directions Into Velocities of Articulators (DIVA) model of speech production (Guenther, Ghosh, & Tourville, 2006). The DIVA model predicts left lateralized activity in inferior…

Product involvement and consumer food-elicited emotional associations: Insights from emoji questionnaires.

PubMed

Jaeger, Sara R; Lee, Pui-Yee; Ares, Gastón

2018-04-01

Individual differences in food-related consumer behaviour are well documented, but lack thorough exploration in relation to product-elicited emotional associations. In this research, focus is directed to product involvement as a factor that modulates emotional associations to tasted products (dried fruit, n = 4) and written descriptions of consumption situations (drinking red wine, cooking dinner using seafood). Emoji questionnaires were used (as check-all-that-apply questions: CATA), and across two studies with consumers in New Zealand (n = 352) and China (n = 450), higher levels of involvement were associated with more positive emotional associations. For example, consumers with higher involvement for dried fruit used emoji with positive meanings (e.g., face savouring delicious food (), smiling face with heart-shaped eyes () and smiling face with smiling eyes () more frequently than those with lower levels of involvement. Conversely, emoji with negative or neutral meanings (e.g., confused face (), confounded face (), neutral face ()), were more frequently used by consumers with lower levels of product involvement. The number of significant differences between the samples of dried fruit were lower in the less involved consumer segment, and these consumers, on average, used less emoji to characterise the samples. A similar pattern of results were established for the written stimuli, which were used with Chinese consumers. For example, in the segment with greater involvement with seafood, associations to emoji with positive meanings were higher when responding to the situation "cooking dinner using frozen seafood as one of the ingredients." In the case of "drinking French red wine," the strategy used to define segments (median vs. triadic split of summed involvement scores) additionally influenced the results, and bigger differences were established when comparing more discrete segments (two extreme groups following triadic split). Copyright © 2018 Elsevier Ltd. All rights reserved.

“Everybody Gotta Have a Dream”: Rap-centered Aspirations among Young Black Males Involved in Rap Music Production – A Qualitative Study

PubMed Central

Foster, B. Brian

2015-01-01

Youth express diverse desires for their educational and occupational futures. Sometimes these aspirations are directed towards somewhat unconventional careers such as rapping and other types of involvement in rap music production. Although many studies have examined traditional educational and occupational aspirations, less is known about the factors that give rise to rap-centered aspirations and how individuals pursue them, particularly as they transition to early adulthood. Drawing on 54 semi- and unstructured interviews with 29 black young men involved in rap music production, I find that rap-centered aspirations are shaped by a range of factors, most notably feedback regarding one’s rap skills, access to recording and production equipment, and the financial means to maintain involvement in rap music production while also ensuring personal and family economic stability. The young men in the study attached different meanings to their aspirations and sometimes recast their motivations for participating in rap music production in response to various social and economic factors. PMID:26005703

Acceptability of formulations and application methods for vaginal microbicides among drug-involved women: results of product trials in three cities.

PubMed

Hammett, T M; Mason, T H; Joanis, C L; Foster, S E; Harmon, P; Robles, R R; Finlinson, H A; Feudo, R; Vining-Bethea, S; Jeter, G; Mayer, K H; Doherty-Iddings, P; Seage, G R

2000-02-01

Female-controlled methods of HIV prevention, such as vaginal microbicides, are urgently needed, particularly among drug-involved women. Acceptability research is critical to product development. To assess the acceptability of forms and application methods for future microbicides. Eighty-four drug-involved women were introduced in groups to three lubricant products, asked to try each for 3 weeks, and scheduled for individual follow-up interviews. Participants and their partners felt positive about the products, and expressed willingness to use microbicides if they were shown to be effective against HIV. Women agreed on product characteristics that influenced their reactions (e.g. ease of insertion, degree of "messiness"), but often disagreed on whether their reactions to these characteristics were positive or negative. Development of acceptable and effective HIV-prevention products depends on understanding the interaction between characteristics of the products and the characteristics and perceptions of women. Levels of sexual risk and acceptability factors based on drug-use patterns, race and ethnicity, culture, age, and types and attitudes of male partners suggest that a "one size fits all" approach will not win broad acceptance among drug-involved women.

A meta-analysis of cambium phenology and growth: linear and non-linear patterns in conifers of the northern hemisphere.

PubMed

Rossi, Sergio; Anfodillo, Tommaso; Cufar, Katarina; Cuny, Henri E; Deslauriers, Annie; Fonti, Patrick; Frank, David; Gricar, Jozica; Gruber, Andreas; King, Gregory M; Krause, Cornelia; Morin, Hubert; Oberhuber, Walter; Prislan, Peter; Rathgeber, Cyrille B K

2013-12-01

Ongoing global warming has been implicated in shifting phenological patterns such as the timing and duration of the growing season across a wide variety of ecosystems. Linear models are routinely used to extrapolate these observed shifts in phenology into the future and to estimate changes in associated ecosystem properties such as net primary productivity. Yet, in nature, linear relationships may be special cases. Biological processes frequently follow more complex, non-linear patterns according to limiting factors that generate shifts and discontinuities, or contain thresholds beyond which responses change abruptly. This study investigates to what extent cambium phenology is associated with xylem growth and differentiation across conifer species of the northern hemisphere. Xylem cell production is compared with the periods of cambial activity and cell differentiation assessed on a weekly time scale on histological sections of cambium and wood tissue collected from the stems of nine species in Canada and Europe over 1-9 years per site from 1998 to 2011. The dynamics of xylogenesis were surprisingly homogeneous among conifer species, although dispersions from the average were obviously observed. Within the range analysed, the relationships between the phenological timings were linear, with several slopes showing values close to or not statistically different from 1. The relationships between the phenological timings and cell production were distinctly non-linear, and involved an exponential pattern. The trees adjust their phenological timings according to linear patterns. Thus, shifts of one phenological phase are associated with synchronous and comparable shifts of the successive phases. However, small increases in the duration of xylogenesis could correspond to a substantial increase in cell production. The findings suggest that the length of the growing season and the resulting amount of growth could respond differently to changes in environmental conditions.

Streamlining a blood center and hospital transfusion service supply chain with an informatics vendor-managed inventory solution: development, implementation, and 3-month follow-up.

PubMed

Tsang, Hamilton C; Garcia, Adam; Scott, Robert; Lancaster, David; Geary, Dianne; Nguyen, Anh-Thu; Shankar, Raina; Buchanan, Leslie; Pham, Tho D

2018-05-16

The ordering process at Stanford Health Care involved twice-daily shipments predicated upon current stock levels from the blood center to the hospital transfusion service. Manual census determination is time consuming and error prone. We aimed to enhance inventory management by developing an informatics platform to streamline the ordering process and reallocate staff productivity. The general inventory accounts for more than 50 product categories based on characteristics including component, blood type, irradiation status, and cytomegalovirus serology status. Over a 5-month calibration period, inventory levels were determined algorithmically and electronically. An in-house software program was created to determine inventory levels, optimize the electronic ordering process, and reduce labor time. A 3-month pilot period was implemented using this program. This system showed noninferiority while saving labor time. The average weekly transfused:stocked ratios for cryoprecipitate, plasma, and red blood cells, respectively, were 1.03, 1.21, and 1.48 before the pilot period, compared with 0.88, 1.17, and 1.40 during (p = 0.28). There were 27 (before) and 31 (during) average STAT units ordered per week (p = 0.86). The number of monthly wasted products due to expiration was 226 (before) and 196 (during) units, respectively (p = 0.28). An estimated 7 hours per week of technologist time was reallocated to other tasks. An in-house electronic ordering system can enhance information fidelity, reallocate and optimize valuable staff productivity, and further standardize ordering. This system showed noninferiority to the labor-intensive manual system while freeing up over 360 hours of staff time per year. © 2018 AABB.

Emergence of semiology in epileptic seizures.

PubMed

Chauvel, Patrick; McGonigal, Aileen

2014-09-01

Semiology, the manifestation of epilepsy, is dependent upon electrical activity produced by epileptic seizures that are organized within existing neural pathways. Clinical signs evolve as the epileptic discharge spreads in both time and space. Studying the relation between these, of which the temporal component is at least as important as the spatial one, is possible using anatomo-electro-clinical correlations of stereoelectroencephalography (SEEG) data. The period of semiology production occurs with variable time lag after seizure onset and signs then emerge more or less rapidly depending on seizure type (temporal seizures generally propagating more slowly and frontal seizures more quickly). The subset of structures involved in semiological production, the "early spread network", is tightly linked to those constituting the epileptogenic zone. The level of complexity of semiological features varies according to the degree of involvement of the primary or associative cortex, with the former having a direct relation to peripheral sensory and motor systems with production of hallucinations (visual and auditory) or elementary sensorimotor signs. Depending on propagation pattern, these signs can occur in a "march" fashion as described by Jackson. On the other hand, seizures involving the associative cortex, having a less direct relation with the peripheral nervous system, and necessarily involving more widely distributed networks manifest with altered cognitive and/or behavioral signs whose neural substrate involves a network of cortical structures, as has been observed for normal cognitive processes. Other than the anatomical localization of these structures, the frequency of the discharge is a crucial determinant of semiological effect since a fast (gamma) discharge will tend to deactivate normal function, whereas a slower theta discharge can mimic physiological function. In terms of interaction between structures, the degree of synchronization plays a key role in clinical expression, as evidenced, for example, by studies of ictal fear-related behavior (decorrelation of activity between structures inducing "release" phenomena) and of déjà vu (increased synchronization). Studies of functional coupling within networks underlying complex ictal behavior indicate that the clinical semiology of a given seizure depends upon neither the anatomical origin of ictal discharge nor the target areas of its propagation alone but on the dynamic interaction between these. Careful mapping of the ictal network in its full spread offers essential information as to the localization of seizure onset, by deducing that a given network configuration could only be generated by a given area or group of areas. Copyright © 2013. Published by Elsevier Inc.

[Coauthorship networks and institutional collaboration in Revista de Neurología].

PubMed

González-Alcaide, G; Alonso-Arroyo, A; González de Dios, J; Sempere, A P; Valderrama-Zurián, J C; Aleixandre-Benavent, R

Scientific cooperation is essential for the advance of science. Bibliometrics and social network analysis offer evaluation indicators to analyse collaboration in scientific papers. The aim of this study is to characterize scientific collaboration patterns in Revista de Neurología between 2002 and 2006. Coauthorships and institutional relationships of papers published in Revista de Neurología have been identified. Collaboration Index, the most productive authors' and institutional collaboration patterns and the types of institutional collaborations have been quantified. Also, it has been constructed the coauthorship networks and the institutional collaboration network. Networks have been identified and represented using Access and Pajek software tools. The Collaboration Index was 4.01. 56.54% of papers involved institutional collaboration. The collaboration between institutions of the same country prevails (52.7%), followed by collaborations between departments, services or units of the same institution (40.47%) and international collaboration (6.83%). 45 coauthorship networks involving 149 investigators with a high intensity of collaboration and a large institutional network involved 80 centres were observed. Revista de Neurología covers scientific production of a high number of research groups. It has been observed a positive evolution in the collaboration patterns over the time. Nevertheless, it is essential to encourage inter-regional and international collaboration.

The effect of music performance on the transcriptome of professional musicians.

PubMed

Kanduri, Chakravarthi; Kuusi, Tuire; Ahvenainen, Minna; Philips, Anju K; Lähdesmäki, Harri; Järvelä, Irma

2015-03-25

Music performance by professional musicians involves a wide-spectrum of cognitive and multi-sensory motor skills, whose biological basis is unknown. Several neuroscientific studies have demonstrated that the brains of professional musicians and non-musicians differ structurally and functionally and that musical training enhances cognition. However, the molecules and molecular mechanisms involved in music performance remain largely unexplored. Here, we investigated the effect of music performance on the genome-wide peripheral blood transcriptome of professional musicians by analyzing the transcriptional responses after a 2-hr concert performance and after a 'music-free' control session. The up-regulated genes were found to affect dopaminergic neurotransmission, motor behavior, neuronal plasticity, and neurocognitive functions including learning and memory. Particularly, candidate genes such as SNCA, FOS and DUSP1 that are involved in song perception and production in songbirds, were identified, suggesting an evolutionary conservation in biological processes related to sound perception/production. Additionally, modulation of genes related to calcium ion homeostasis, iron ion homeostasis, glutathione metabolism, and several neuropsychiatric and neurodegenerative diseases implied that music performance may affect the biological pathways that are otherwise essential for the proper maintenance of neuronal function and survival. For the first time, this study provides evidence for the candidate genes and molecular mechanisms underlying music performance.

Professional experience and traffic accidents/near-miss accidents among truck drivers.

PubMed

Girotto, Edmarlon; Andrade, Selma Maffei de; González, Alberto Durán; Mesas, Arthur Eumann

2016-10-01

To investigate the relationship between the time working as a truck driver and the report of involvement in traffic accidents or near-miss accidents. A cross-sectional study was performed with truck drivers transporting products from the Brazilian grain harvest to the Port of Paranaguá, Paraná, Brazil. The drivers were interviewed regarding sociodemographic characteristics, working conditions, behavior in traffic and involvement in accidents or near-miss accidents in the previous 12 months. Subsequently, the participants answered a self-applied questionnaire on substance use. The time of professional experience as drivers was categorized in tertiles. Statistical analyses were performed through the construction of models adjusted by multinomial regression to assess the relationship between the length of experience as a truck driver and the involvement in accidents or near-miss accidents. This study included 665 male drivers with an average age of 42.2 (±11.1) years. Among them, 7.2% and 41.7% of the drivers reported involvement in accidents and near-miss accidents, respectively. In fully adjusted analysis, the 3rd tertile of professional experience (>22years) was shown to be inversely associated with involvement in accidents (odds ratio [OR] 0.29; 95% confidence interval [CI] 0.16-0.52) and near-miss accidents (OR 0.17; 95% CI 0.05-0.53). The 2nd tertile of professional experience (11-22 years) was inversely associated with involvement in accidents (OR 0.63; 95% CI 0.40-0.98). An evident relationship was observed between longer professional experience and a reduction in reporting involvement in accidents and near-miss accidents, regardless of age, substance use, working conditions and behavior in traffic. Copyright © 2016 Elsevier Ltd. All rights reserved.

Costs of Alcohol-Involved Crashes, United States, 2010

PubMed Central

Zaloshnja, Eduard; Miller, Ted R.; Blincoe, Lawrence J.

2013-01-01

This paper estimates total and unit costs of alcohol-involved crashes in the U.S. in 2010. With methods from earlier studies, we estimated costs per crash survivor by MAIS, body part, and fracture/dislocation involvement. We multiplied them times 2010 crash incidence estimates from NHTSA data sets, with adjustments for underreporting of crashes and their alcohol involvement. The unit costs are lifetime costs discounted at 3%. To develop medical costs, we combined 2008 Health Care Utilization Program national data for hospitalizations and ED visits of crash survivors with prior estimates of post-discharge costs. Productivity losses drew on Current Population Survey and American Time Use Survey data. Quality of life losses came from a 2011 AAAM paper and property damage from insurance data. We built a hybrid incidence file comprised of 2008–2010 and 1984–86 NHTSA crash surveillance data, weighted with 2010 General Estimates System weights. Fatality data came from the 2010 FARS. An estimated 12% of 2010 crashes but only 0.9% of miles driven were alcohol-involved (BAC > .05). Alcohol-involved crashes cost an estimated $125 billion. That is 22.5% of the societal cost of all crashes. Alcohol-attributable crashes accounted for an estimated 22.5% of US auto liability insurance payments. Alcohol-involved crashes cost $0.86 per drink. Above the US BAC limit of .08, crash costs were $8.37 per mile driven; 1 in 788 trips resulted in a crash and 1 in 1,016 trips in an arrest. Unit costs for crash survivors by severity are higher for impaired driving than for other crashes. That suggests national aggregate impaired driving cost estimates in other countries are substantial underestimates if they are based on all-crash unit costs. PMID:24406941

Development of web tools to disseminate space geodesy data-related products

NASA Astrophysics Data System (ADS)

Soudarin, Laurent; Ferrage, Pascale; Mezerette, Adrien

2015-04-01

In order to promote the products of the DORIS system, the French Space Agency CNES has developed and implemented on the web site of the International DORIS Service (IDS) a set of plot tools to interactively build and display time series of site positions, orbit residuals and terrestrial parameters (scale, geocenter). An interactive global map is also available to select sites, and to get access to their information. Besides the products provided by the CNES Orbitography Team and the IDS components, these tools allow comparing time evolutions of coordinates for collocated DORIS and GNSS stations, thanks to the collaboration with the Terrestrial Frame Combination Center of the International GNSS Service (IGS). A database was created to improve robustness and efficiency of the tools, with the objective to propose a complete web service to foster data exchange with the other geodetic services of the International Association of Geodesy (IAG). The possibility to visualize and compare position time series of the four main space geodetic techniques DORIS, GNSS, SLR and VLBI is already under way at the French level. A dedicated version of these web tools has been developed for the French Space Geodesy Research Group (GRGS). It will give access to position time series provided by the GRGS Analysis Centers involved in DORIS, GNSS, SLR and VLBI data processing for the realization of the International Terrestrial Reference Frame. In this presentation, we will describe the functionalities of these tools, and we will address some aspects of the time series (content, format).

Sterile products: advances and challenges in formulation, manufacturing and regulatory aspects--a regulatory review perspective.

PubMed

Hussong, David

2010-09-01

For several decades, the FDA has undertaken many initiatives to improve the quality and safety of sterile drug products. In recent years, efforts have also been undertaken to accelerate the rate for application approval by adding earlier involvement of microbiology reviewers in drug development. Product and manufacturing process development, as well as safe use and product design, are among the elements of enhanced technical involvement. An overview of the product quality microbiology aspects for sterile drugs is provided.

Structures of Degradation Products and Degradation Pathways of Aflatoxin B1 by High-Voltage Atmospheric Cold Plasma (HVACP) Treatment.

PubMed

Shi, Hu; Cooper, Bruce; Stroshine, Richard L; Ileleji, Klein E; Keener, Kevin M

2017-08-02

High-voltage atmospheric cold plasma (HVACP) is a novel nonthermal decontamination technology that has potential for use in the food industry. In this study, HVACP was applied to treat pure aflatoxin B 1 (AFB 1 ) powder on a glass slide. AFB 1 was degraded by 76% using a 5 min HVACP treatment in air having 40% relative humidity. The degradation products of AFB 1 were separated, and their molecular formulas were elucidated using liquid-chromatography time-of-flight mass spectrometry (HPLC-TOF-MS). Six main degradation products were observed. The structures of the degradation products were further clarified via orbitrap mass spectrometry by means of fragmentation of the parental ions. Two degradation pathways were proposed on the basis of the structure of the degradation products. Among the six degradation products, two were ozonolysis products of AFB 1 . The appearance of the other four degradation products indicates that AFB 1 was degraded by other reactive species besides ozone that were generated during HVACP treatment. Reactive oxygen gas species are suggested as the major agents for aflatoxin degradation during HVACP treatment. Two degradation pathways of AFB 1 by HVACP treatment were proposed. One pathway involves reactions in which H • , OH • , CHO • radicals are added. The other involves epoxidation by HO 2 • radicals and oxidation of AFB 1 by the combined effects of the oxidative species OH • , H 2 O 2 , and O 3 . According to the structure-bioactivity relationship of AFB 1 , the bioactivity of the AFB 1 samples subjected to HVACP treatment is significantly reduced because of the disappearance of the C8═C9 double bond in the furofuran ring in all of the major degradation products as well as the modification of the lactone ring, cyclopentanone, and the methoxyl group.

Strain improvement of Trichoderma viride for increased cellulase production by irradiation of electron and (12)C(6+)-ion beams.

PubMed

Li, Zhaozhou; Chen, Xiujin; Li, Zhili; Li, Daomin; Wang, Yao; Gao, Hongli; Cao, Li; Hou, Yuze; Li, Songbiao; Liang, Jianping

2016-06-01

To improve cellulase production and activity, Trichoderma viride GSICC 62010 was subjected to mutation involving irradiation with an electron beam and subsequently with a (12)C(6+)-ion beam. Mutant CIT 626 was the most promising cellulase producer after preliminary and secondary screening. Soluble protein production and cellulase activities were increased mutifold. The optimum temperature, pH and culture time for the maximum cellulase production of the selected mutant were 35 °C, pH 5 and 6 days. The highest cellulase production was obtained using wheat bran. The prepared cellulases from T. viride CIT 626 had twice the hydrolytic performance with sawdust (83 %) than that from the parent strain (42.5 %). Furthermore, molecular studies demonstrated that there were some key mutation sites suggesting that some amino acid changes in the protein caused by base mutations had led to the enhanced cellulase production and activity. Mutagenesis with electron and (12)C(6+)-ion beams could be developed as an effective tool for improvement of cellulase producing strains.

Development and application of a crossbreeding simulation model for goat production systems in tropical regions.

PubMed

Tsukahara, Y; Oishi, K; Hirooka, H

2011-12-01

A deterministic simulation model was developed to estimate biological production efficiency and to evaluate goat crossbreeding systems under tropical conditions. The model involves 5 production systems: pure indigenous, first filial generations (F1), backcross (BC), composite breeds of F1 (CMP(F1)), and BC (CMP(BC)). The model first simulates growth, reproduction, lactation, and energy intakes of a doe and a kid on a 1-d time step at the individual level and thereafter the outputs are integrated into the herd dynamics program. The ability of the model to simulate individual performances was tested under a base situation. The simulation results represented daily BW changes, ME requirements, and milk yield and the estimates were within the range of published data. Two conventional goat production scenarios (an intensive milk production scenario and an integrated goat and oil palm production scenario) in Malaysia were examined. The simulation results of the intensive milk production scenario showed the greater production efficiency of the CMP(BC) and CMP(F1) systems and decreased production efficiency of the F1 and BC systems. The results of the integrated goat and oil palm production scenario showed that the production efficiency and stocking rate were greater for the indigenous goats than for the crossbreeding systems.

The future of oil: unconventional fossil fuels.

PubMed

Chew, Kenneth J

2014-01-13

Unconventional fossil hydrocarbons fall into two categories: resource plays and conversion-sourced hydrocarbons. Resource plays involve the production of accumulations of solid, liquid or gaseous hydro-carbons that have been generated over geological time from organic matter in source rocks. The character of these hydrocarbons may have been modified subsequently, especially in the case of solids and extra-heavy liquids. These unconventional hydrocarbons therefore comprise accumulations of hydrocarbons that are trapped in an unconventional manner and/or whose economic exploitation requires complex and technically advanced production methods. This review focuses primarily on unconventional liquid hydro-carbons. The future potential of unconventional gas, especially shale gas, is also discussed, as it is revolutionizing the energy outlook in North America and elsewhere.

Towards a service bus for distributed manufacturing

NASA Astrophysics Data System (ADS)

Delgado-Gomes, Vasco; Oliveira-Lima, José A.; Martins, João F.; Jardim-Gonçalves, Ricardo

2013-10-01

The electronic exchange of data between industrial equipment, manufacturing and information systems of companies is becoming increasingly important with the current trend of reducing products' life cycle, wide range of diversified products, and the need to answer the specific needs of each consumer. In this context, quality, time, costs involved in integrating information over the company's internal processes, and in the interaction of these processes with their customers, suppliers and other business partners are in many sectors, far beyond what the current technology and communications solutions enable. This paper presents a communication infrastructure to integrate several companies from different sectors of the supply chain, to exchange their heterogeneous information using a data model which is composed by different standards.

Surface Support Systems for Co-Operative and Integrated Human/Robotic Lunar Exploration

NASA Technical Reports Server (NTRS)

Mueller, Robert P.

2006-01-01

Human and robotic partnerships to realize space goals can enhance space missions and provide increases in human productivity while decreasing the hazards that the humans are exposed to. For lunar exploration, the harsh environment of the moon and the repetitive nature of the tasks involved with lunar outpost construction, maintenance and operation as well as production tasks associated with in-situ resource utilization, make it highly desirable to use robotic systems in co-operation with human activity. A human lunar outpost is functionally examined and concepts for selected human/robotic tasks are discussed in the context of a lunar outpost which will enable the presence of humans on the moon for extended periods of time.

[Alteration of cholera toxin biosynthesis in Vibrio cholerae 01 as a result of temperate phage 139 integration into bacterial chromosome].

PubMed

Eroshenko, G A; Smirnova, N I

2002-01-01

Infection of V. cholerae 01 (classical and eltor biovars) cells with the temperate cholera phage 139 derived from V. cholerae serogroup 0139 followed by integration of the phage genome into the bacterial chromosome significantly increased the production of cholera toxin, the main virulence factor. The level of toxin biosynthesis in the lysogenic V. cholerae classical strain increased 3-fold and that in V. eltor thirty times in comparison with the parental strains. Increased production of cholera toxin was not associated with an increase in the number of copies of genes involved in its biosynthesis but seemed to be due to changes in toxinogenesis regulation.

Producing (in) Europe and Asia, 1750-1850.

PubMed

Roberts, Lissa

2015-12-01

This essay argues for understanding and investigating the history of production, not primarily as a quantifiable economic phenomenon, but as a history of practice that involves the human senses, culture, governance, and material engagement. The vehicle it uses to make its case focuses on a brief examination of production cycles involving salts in various parts of Eurasia during the century that runs from approximately 1750 to 1850. The essay's approach suggests a history of production in Eurasia that was both locally variegated and transregionally networked. It further involved the interaction between people and their sociomaterial environments, the latter understood as the evolving outcome of interplay between material elements and processes; culturally rooted tastes and values; and variously organized efforts to stimulate, manage, and pursue cycles of production and use. This essay further reflects on how contemporary commentators and present-day historians have (re)configured the geography of these practices in a way that emphasizes divergence between Europe and Asia. Part of this reflection involves looking at what can happen when the historical investigation of production is based on economic analysis. So too does it involve thinking about the potential pitfalls of framing comparative histories.

Metabolic Engineering of Saccharomyces cerevisiae

PubMed Central

Ostergaard, Simon; Olsson, Lisbeth; Nielsen, Jens

2000-01-01

Comprehensive knowledge regarding Saccharomyces cerevisiae has accumulated over time, and today S. cerevisiae serves as a widley used biotechnological production organism as well as a eukaryotic model system. The high transformation efficiency, in addition to the availability of the complete yeast genome sequence, has facilitated genetic manipulation of this microorganism, and new approaches are constantly being taken to metabolicially engineer this organism in order to suit specific needs. In this paper, strategies and concepts for metabolic engineering are discussed and several examples based upon selected studies involving S. cerevisiae are reviewed. The many different studies of metabolic engineering using this organism illustrate all the categories of this multidisciplinary field: extension of substrate range, improvements of producitivity and yield, elimination of byproduct formation, improvement of process performance, improvements of cellular properties, and extension of product range including heterologous protein production. PMID:10704473

Production and delivery of polarized Xenon-129 for in vivo MRS/MRI.

NASA Astrophysics Data System (ADS)

Rosen, Matthew S.; Chupp, Timothy E.; Coulter, Kevin P.; Welsh, Robert C.; Swanson, Scott

1998-05-01

Laser polarized ^129Xe can be used as an entirely new magnetic tracer, and is a powerful enhancement to currently existing MRI techniques. Inert laser polarized ^129Xe is inhaled and transported via blood flow where it is detected using MR spectroscopy and imaging techniques. The time-dependent distribution patterns of ^129Xe signal intensity directly reflect local blood volume, blood flow rates, and the efficiency of perfusion and diffusive transport in tissues. We have developed a uniquely constructed laser polarized ^129Xe production and delivery system that is used in both our in vitro and in vivo imaging experiments with rats. This reliable, effective, and relatively simple production method for large volumes of laser polarized ^129Xe is the key to all other areas of research involving use of laser polarized gases.

Microbial enzymes: industrial progress in 21st century.

PubMed

Singh, Rajendra; Kumar, Manoj; Mittal, Anshumali; Mehta, Praveen Kumar

2016-12-01

Biocatalytic potential of microorganisms have been employed for centuries to produce bread, wine, vinegar and other common products without understanding the biochemical basis of their ingredients. Microbial enzymes have gained interest for their widespread uses in industries and medicine owing to their stability, catalytic activity, and ease of production and optimization than plant and animal enzymes. The use of enzymes in various industries (e.g., food, agriculture, chemicals, and pharmaceuticals) is increasing rapidly due to reduced processing time, low energy input, cost effectiveness, nontoxic and eco-friendly characteristics. Microbial enzymes are capable of degrading toxic chemical compounds of industrial and domestic wastes (phenolic compounds, nitriles, amines etc.) either via degradation or conversion. Here in this review, we highlight and discuss current technical and scientific involvement of microorganisms in enzyme production and their present status in worldwide enzyme market.

Pharmaceutical new product development: the increasing role of in-licensing.

PubMed

Edwards, Nancy V

2008-12-01

Many pharmaceutical companies are facing a pipeline gap because of the increasing economic burden and uncertainty associated with internal research and development programs designed to develop new pharmaceutical products. To fill this pipeline gap, pharmaceutical companies are increasingly relying on in-licensing opportunities. New business development identifies new pharmaceuticals that satisfy unmet needs and are a good strategic fit for the company, completes valuation models and forecasts, evaluates the ability of the company to develop and launch products, and pursues in-licensing agreements for pharmaceuticals that cannot be developed internally on a timely basis. These agreements involve the transfer of access rights for patents, trademarks, or similar intellectual property from an outside company in exchange for payments. Despite the risks, in-licensing is increasingly becoming the preferred method for pharmaceutical companies with pipeline gaps to bring new pharmaceuticals to the clinician.

[A delayed motor production of open chains of linear strokes presented visually in static and dynamic modes: a comparison between 9 to 11 years old children and adults].

PubMed

Antonova, A A; Absatova, K A; Korneev, A A; Kurgansky, A V

2015-01-01

The production of drawing movements was studied in 29 right-handed children of 9-to-11 years old. The movements were the sequences of horizontal and vertical linear stokes conjoined at right angle (open polygonal chains) referred to throughout the paper as trajectories. The length of a trajectory varied from 4 to 6. The trajectories were presented visually to a subject in static (linedrawing) and dynamic (moving cursor that leaves no trace) modes. The subjects were asked to draw (copy) a trajectory in response to delayed go-signal (short click) as fast as possible without lifting the pen. The production latency time, the average movement duration along a trajectory segment, and overall number of errors committed by a subject during trajectory production were analyzed. A comparison of children's data with similar data in adults (16 subjects) shows the following. First, a substantial reduction in error rate is observed in the age range between 9 and 11 years old for both static and dynamic modes of trajectory presentation, with children of 11 still committing more error than adults. Second, the averaged movement duration shortens with age while the latency time tends to increase. Third, unlike the adults, the children of 9-11 do not show any difference in latency time between static and dynamic modes of visual presentation of trajectories. The difference in trajectory production between adult and children is attributed to the predominant involvement of on-line programming in children and pre-programming in adults.

Alternariol induce toxicity via cell death and mitochondrial damage on Caco-2 cells.

PubMed

Fernández-Blanco, Celia; Juan-García, Ana; Juan, Cristina; Font, Guillermina; Ruiz, Maria-Jose

2016-02-01

Alternariol (AOH), a mycotoxin produced by Alternaria sp, appears as food contaminant in fruit, vegetables and cereal products. Its toxicity has been demonstrated, but the mechanisms involved have not been elucidated yet. In this study, the pathways triggered by AOH and degradation products generated on Caco-2 cells were evaluated. Cells were exposed to AOH sub-cytotoxic concentrations of 15, 30 and 60 μM. Cell cycle disruption, the induction of apoptosis/necrosis and changes in mitochondrial membrane potential (Δψm) after 24 and 48 h was asses by flow cytometry. Also, AOH and its degradation products were evaluated after 24 and 48 h by high-performance liquid chromatography with tandem mass spectrometric (LC-MS/MS) to detect and quantify its levels. Cell cycle was significantly decreased at G1 phase and increased at S and G2/M phase at the time of exposure. AOH induced necrosis, apoptosis/necrosis and loss of Δψm in a dose and time-dependent manner. The concentrations of AOH quantified in the culture media exposed to AOH decreased as the exposure time was increased. In conclusion, AOH caused cytotoxic effects supported by blocking cell cycle, decreasing cell proliferation and increasing apoptosis/necrosis cells. Copyright © 2015 Elsevier Ltd. All rights reserved.

The role of leukotoxin (9,10-epoxy-12-octadecenoate) in the genesis of coagulation abnormalities.

PubMed

Sugiyama, S; Hayakawa, M; Hanaki, Y; Hieda, N; Asai, J; Ozawa, T

1988-01-01

This study was designed to clarify whether or not leukotoxin (9, 10-epoxy-12-octadecenoate), which is biosynthesized by neutrophils, might be involved in the genesis of coagulating abnormalities. Twelve dogs were divided into 2 groups. In the test group (n = 6), 100 mumol/kg of leukotoxin was injected intravenously, and in the control group (n = 6), 100 mumol/kg of linoleate was injected. In each group, a series of blood samples were collected and used for coagulation studies. After the end of the experimental period, a histological study was performed on organs removed from the dogs. In the leukotoxin group, fibrin and fibrinogen degradation products (FDP) was increased time-dependently. Fibrinogen was decreased, and prothrombin time and activated partial thromboplastin time were prolonged in parallel with the increase in FDP. A decrease in number of platelets was also observed. Intravascular coagulation was observed in sections of lung. These data were compatible with a diagnosis of disseminated intravascular coagulation (DIC). No significant changes in these parameters were observed in the linoleate group. Leukotoxin has been confirmed to show antifungal and antibacterial activity, and its production might be a defensive response to infection. Over-production of leukotoxin associated with severe infection might therefore account for infection-induced DIC.

Production of biomethane from palm oil mill effluent (POME) with fed batch system in beam-shaped digester

NASA Astrophysics Data System (ADS)

Aznury, Martha; Amin, Jaksen M.; Hasan, Abu; Himmatuliza, Astinesia

2017-05-01

Palm oil mill effluent (POME) is the biggest liquid waste which is produced from palm oil production. POME are containing organic matter, high levels of biological oxygen demand (BOD) and chemical oxygen demand (COD) were 28000 mg/L and 48000 mg/L. To reduce the levels of pollution caused by POME, is necessary to do stages of processing using a biological process that involves aerobic and anaerobic bacteria so that it can be utilized as a new product that has economic value, one is biogas. The processing into biogas in anaerobic performed by fed batch system. In the ratio between POME and activated microorganismes are 70:30%. The process of anaerobic fermentation in fed batch is done by time variation of the addition of the substrate. The mixture of POME and activated microorganismes were fermented for a month and then after one month substrates were added gradually as much as 1 liter into the digester with a variety of additional time are 1, 2, and 5 days. The interval of addition of the substrate give effect to the pH and the quantity of biogas produced. The highest increasing of the quantity of biomethane was 25.14 mol% at the time the addition of substrate every fifth day.

Phytoplankton Diversity and Geologically Relevant Carbon: Using metagenomics to determine phytoplankton biomarker production

NASA Astrophysics Data System (ADS)

Kodner, R. B.; Armbrust, E.

2008-12-01

Phytoplankton play an important role in the global carbon cycle, on short and long time scales. On long time scales, organic carbon, especially recalcitrant forms of biomass such as lipids, can be preserved and thus sequestered in sediments and rocks on geologic time scales. If the preserved lipids have some taxonomic specificity, they can be used as fossil biomarkers to characterize the community of organisms that contributed to ancient carbon sinks. Currently, it is not well understood how well the complex mixture of organic compounds preserved in geological carbon sinks represents the original community that produced those molecules or how the diversity of organism in a community is reflected in the lipid biomarkers they collectively synthesize. We have begun to investigate these questions by characterizing lipid biomarker production in modern phytoplankton communities with metagenomic data sets. Here we evaluate the information on community biomarker biosynthesis gathered from this type of data set using sterols as a case study. We have identified genes involved in sterol biosynthesis in a number of metagenomes and placed these genes in a phylogenetic context using a method designed to deal with short metagenomic sequences. The degree of taxonomic diversity of biomarker production measured with gene sequences can be more specific than lipid analysis alone.

Copernicus Rising

NASA Astrophysics Data System (ADS)

Rose, Michael A.

2007-08-01

Copernicus Rising began as a historical biography when it was first conceived, but as the writing progressed it quickly became a rather absurd play that took historical research and twisted it through the lens of my own wit, philosophy and personal affection for the characters. When working with historical figures--characters who existed in a very tangible way in our own history--the playwriting process opens a dialogue between different points in time and space. The difficulty lies in finding a unique and clear voice amongst the discordant personalities involved in this time and space overlap, both in the writing and production processes, in order to get to the heart of what the play is really all about. This thesis follows the journey of the play from its historical roots through the creation of an absurd journey both insides and outside time, space and the human mind. The first part of the thesis explains the beginnings of the concept and outlines much of the research and development that went into the play. The next part outlines the process of production and integrating the world on paper with that of moving bodies on stage. In the final part, post-production discussions and audience feedback sessions shape the play into the draft included in this thesis.

Search for the Evolution of Steroid Biosynthesis in the Geological Record

NASA Astrophysics Data System (ADS)

Brocks, J. J.

2004-12-01

To study the evolution of the structure of organisms we can directly examine fossilized shells, skeletons and petrified cells. In contrast, for the tentative reconstruction of the phylogeny of biosynthetic pathways, such as steroid anabolism, we rely entirely on the comparative molecular biology of living organisms. Thus, without fossil evidence, the times in geological history when successive steps of a metabolic pathway evolved remain particularly elusive. Molecular clocks of genes coding for the enzymes involved in a biosynthetic pathway might provide a rough guess when a natural product first appeared in geological time, but they are intrinsically unreliable without calibration points in the distant past. However, it might be possible to trace the evolutionary history of some biosynthetic pathways directly in the geological record by searching for hydrocarbon biomarkers of anabolic intermediates. Biomarkers are molecular fossils of natural products. They often retain the diagnostic carbon skeleton of their biological precursor and remain stable over hundreds of millions of years enclosed in organic-rich sedimentary rocks. Sterane hydrocarbons are particularly abundant biomarkers and potentially suitable for the search of biosynthetic intermediates. Steranes are the fossil equivalents of functionalized steroids found in eukaryotes and certain bacteria. The biosynthesis of typical eukaryotic steroids such as cholesterol (C27), ergosterol (C28) and sitosterol (C29) from the acyclic precursor squalene (C30) involves more than 20 enzymatic steps. The most crucial steps include modification of the carbon skeleton by removal of several methyl groups from the ring system and addition of alkyl groups to the steroid side chain. The evolution of this complex pathway must have occurred over geologically significant periods of time and likely involved several preadaptive intermediates that represented structurally less derived but fully functional lipids. Thus, if a molecular corollary of `ontogeny recapitulates phylogeny' applies, it might be possible to detect a sequence of increasingly modified fossil steroids in the geological record and to create a time frame for the evolution of this fundamental biosynthetic pathway. Here we present first results of an extensive search for the fossil remains of evolutionary intermediate steroids in sedimentary successions of Precambrian age.

Throughput Enhancement of Car Exhaust Fabrication Line by Applying MOST

NASA Astrophysics Data System (ADS)

Hanash, E. A. H.; Karim, A. N. M.; Tanjong Tuan, Saravanan; Mohiuddin, A. K. M.

2017-03-01

In the fiercely competitive world market of today, manufacturers are facing increasingly tougher challenges and are compelled to find ways for productivity enhancement wherever possible in the whole supply chain. Nevertheless there are many facets in business process which can be explored for possible improvement, an immediate focus goes for the involved processes to re-engineer the activities in different workstations for an efficient and balanced assembly or fabrication line. In this paper an industrial case on fabrication line of a car exhaust system is presented to illustrate the scope of improvement by applying the MOST (Maynard’s Operation Sequence Technique) in streamlining the activities followed by assembly line balancing (ALB). The whole process of conducting various tasks is investigated to find out the lapses or wastes, to search for better option and to set the standard times for the tasks. Then individual workstation time is worked out by summing up the standard times of the involved tasks or activities and the concept of ALB is attempted to balance the fabrication line. So by possible reduction or elimination of the identified wastes or lapses workstation times including the bottleneck station are lowered. As a result the throughput of car exhaust systems is enhanced. According to the current practice, the Takt time is set at 3 minutes. However, upon an analysis through use of the MOST, the bottleneck station time is found to be as low as 1.27 minutes. Thus an opportunity of meeting the current level of demand with significantly lower workforce (with 2 operators instead of 5) is revealed. Alternatively, if necessary, an increased workload can be assigned for the current level of workforce. Moreover, with proper distribution of activities among the workstations using the concept of ALB, the line efficiency is found to be improved. So the line balance loss in the current setup of production line is also possible to be largely reduced. Thus daily production of car exhaust, if modified with suggested changes with the current workforce, could be more than double compared to the current daily output. Hence, effectiveness of the MOST followed by ALB applications to expose and remove the operational wastes in the work flow is reiterated with enhanced throughput.

Using Multiorder Time-Correlation Functions (TCFs) To Elucidate Biomolecular Reaction Pathways from Microsecond Single-Molecule Fluorescence Experiments.

PubMed

Phelps, Carey; Israels, Brett; Marsh, Morgan C; von Hippel, Peter H; Marcus, Andrew H

2016-12-29

Recent advances in single-molecule fluorescence imaging have made it possible to perform measurements on microsecond time scales. Such experiments have the potential to reveal detailed information about the conformational changes in biological macromolecules, including the reaction pathways and dynamics of the rearrangements involved in processes, such as sequence-specific DNA "breathing" and the assembly of protein-nucleic acid complexes. Because microsecond-resolved single-molecule trajectories often involve "sparse" data, that is, they contain relatively few data points per unit time, they cannot be easily analyzed using the standard protocols that were developed for single-molecule experiments carried out with tens-of-millisecond time resolution and high "data density." Here, we describe a generalized approach, based on time-correlation functions, to obtain kinetic information from microsecond-resolved single-molecule fluorescence measurements. This approach can be used to identify short-lived intermediates that lie on reaction pathways connecting relatively long-lived reactant and product states. As a concrete illustration of the potential of this methodology for analyzing specific macromolecular systems, we accompany the theoretical presentation with the description of a specific biologically relevant example drawn from studies of reaction mechanisms of the assembly of the single-stranded DNA binding protein of the T4 bacteriophage replication complex onto a model DNA replication fork.

Predictable 'meta-mechanisms' emerge from feedbacks between transpiration and plant growth and cannot be simply deduced from short-term mechanisms.

PubMed

Tardieu, François; Parent, Boris

2017-06-01

Growth under water deficit is controlled by short-term mechanisms but, because of numerous feedbacks, the combination of these mechanisms over time often results in outputs that cannot be deduced from the simple inspection of individual mechanisms. It can be analysed with dynamic models in which causal relationships between variables are considered at each time-step, allowing calculation of outputs that are routed back to inputs for the next time-step and that can change the system itself. We first review physiological mechanisms involved in seven feedbacks of transpiration on plant growth, involving changes in tissue hydraulic conductance, stomatal conductance, plant architecture and underlying factors such as hormones or aquaporins. The combination of these mechanisms over time can result in non-straightforward conclusions as shown by examples of simulation outputs: 'over production of abscisic acid (ABA) can cause a lower concentration of ABA in the xylem sap ', 'decreasing root hydraulic conductance when evaporative demand is maximum can improve plant performance' and 'rapid root growth can decrease yield'. Systems of equations simulating feedbacks over numerous time-steps result in logical and reproducible emergent properties that can be viewed as 'meta-mechanisms' at plant level, which have similar roles as mechanisms at cell level. © 2016 John Wiley & Sons Ltd.

Iron Fertilization and Productivity in the Panama Basin

NASA Astrophysics Data System (ADS)

Loveley, M. R.; Marcantonio, F.; Lyle, M. W.; Hertzberg, J. E.

2016-12-01

The Panama Basin, located in the Eastern Equatorial Pacific, is a high-nutrient low-chlorophyll zone (HNLC). HNLC zones are thought to be iron limited, and thus have low rates of primary productivity. Iron can be delivered to the ocean by continental dust, and times of increased dust flux are thought to be correlated with increased productivity. However, few studies have addressed the relationship between dust flux and primary productivity in the Panama Basin. We use xs230Th-derived 232Th accumulation rates as a dust flux proxy, and excess Ba, and authigenic U to reconstruct primary productivity in the basin. We focus on these proxies' differences between glacial and interglacial times for the last five marine isotope stages, during which glacial times are dustier. Our study involves two marine sediment cores, one retrieved from the northern part of the Panama Basin at the Cocos Ridge, (MV1014-01-"8JC", 6° 14.0'N 86° 2.6' W, 1993 m depth), and one from the southern part of the basin at the Carnegie Ridge, (MV1014-02-"17JC" 0° 10.8'S 85° 52.0' W, 2846 m depth). Both cores record high sedimentation rates (between 4 and 20 cm kyr-1) which allow us to present a high-resolution study of the basin. However, sediment focusing and the preferential transport of fine grained material have been identified in these cores. In the Panama Basin, the lithogenic dust fraction is part of the fine fraction (<4 µm) influenced by sediment focusing. Our recent research has shown that 230Th-normalized MARs of the fine-grained fraction remain relatively unaffected by the redistribution process. Our preliminary findings show that dust flux may not have played a major role in influencing primary productivity during glacial periods in the Panama Basin. Other factors, such as nutrient consumption or nutrient supply from upwelled deep water, may have had a more dominant role during these times.

The construct of food involvement in behavioral research: scale development and validation.

PubMed

Bell, Rick; Marshall, David W

2003-06-01

The construct of involvement has been found to influence brand loyalty, product information search processing, responses to advertising communications, diffusion of innovations, and ultimately, product choice decisions. Traditionally, involvement has been defined as being a characteristic of either a product or of an individual. In the present research, we make an assumption that an individual's 'food involvement' is a somewhat stable characteristic and we hypothesized that involvement with foods would vary between individuals, that individuals who are more highly involved with food would be better able to discriminate between a set of food samples than would less food involved individuals, and that this discrimination would operate both in affective and perceptive relative judgments. Using standard scale construction techniques, we developed a measure of the characteristic of food involvement, based on activities relating to food acquisition, preparation, cooking, eating and disposal. After several iterations, a final 12-item measure was found to have good test-retest reliability and internal consistency within two subscales. A behavioral validation study demonstrated that measures of food involvement were associated with discrimination and hedonic ratings for a range of foods in a laboratory setting. These findings suggest that food involvement, as measured by the Food Involvement Scale, may be an important mediator to consider when undertaking research with food and food habits.

Transcriptional activator Cat8 is involved in regulation of xylose alcoholic fermentation in the thermotolerant yeast Ogataea (Hansenula) polymorpha.

PubMed

Ruchala, Justyna; Kurylenko, Olena O; Soontorngun, Nitnipa; Dmytruk, Kostyantyn V; Sibirny, Andriy A

2017-02-28

Efficient xylose alcoholic fermentation is one of the key to a successful lignocellulosic ethanol production. However, regulation of this process in the native xylose-fermenting yeasts is poorly understood. In this work, we paid attention to the transcriptional factor Cat8 and its possible role in xylose alcoholic fermentation in Ogataea (Hansenula) polymorpha. In Saccharomyces cerevisiae, organism, which does not metabolize xylose, gene CAT8 encodes a Zn-cluster transcriptional activator necessary for expression of genes involved in gluconeogenesis, respiration, glyoxylic cycle and ethanol utilization. Xylose is a carbon source that could be fermented to ethanol and simultaneously could be used in gluconeogenesis for hexose synthesis. This potentially suggests involvement of CAT8 in xylose metabolism. Here, the role of CAT8 homolog in the natural xylose-fermenting thermotolerant yeast O. polymorpha was characterized. The CAT8 ortholog was identified in O. polymorpha genome and deleted both in the wild-type strain and in advanced ethanol producer from xylose. Constructed cat8Δ strain isolated from wild strain showed diminished growth on glycerol, ethanol and xylose as well as diminished respiration on the last substrate. At the same time, cat8Δ mutant isolated from the best available O. polymorpha ethanol producer showed only visible defect in growth on ethanol. CAT8 deletant was characterized by activated transcription of genes XYL3, DAS1 and RPE1 and slight increase in the activity of several enzymes involved in xylose metabolism and alcoholic fermentation. Ethanol production from xylose in cat8Δ mutants in the background of wild-type strain and the best available ethanol producer from xylose increased for 50 and 30%, respectively. The maximal titer of ethanol during xylose fermentation was 12.5 g ethanol/L at 45 °C. Deletion of CAT8 did not change ethanol production from glucose. Gene CAT8 was also overexpressed under control of the strong constitutive promoter GAP of glyceraldehyde-3-phosphate dehydrogenase. Corresponding strains showed drop in ethanol production in xylose medium whereas glucose alcoholic fermentation remained unchanged. Available data suggest on specific role of Cat8 in xylose alcoholic fermentation. The CAT8 gene is one of the first identified genes specifically involved in regulation of xylose alcoholic fermentation in the natural xylose-fermenting yeast O. polymorpha.

Implications of intensification of pastoral animal production on animal welfare.

PubMed

Stafford, Kj; Gregory, Ng

2008-12-01

The intensification of pastoral animal production results from several major developments including increased forage production and utilisation, diet supplementation, breeding animals to increase milk, meat or wool production, and changes in management. The impact of increased intensification on welfare will differ across species and systems. More intensive-grazing systems and the feeding of novel forages will underpin all moves to intensification. More intensive grazing generally reduces opportunities for shade and shelter. Improved nutrition will generally benefit welfare but competition for available feed may cause increased social pressure. Increased flock and herd size will be associated with a reduction in the human:animal ratio and less time to observe individual animals. Remote monitoring of activity and health might counter this impact. Intensification of dairy production will result in larger herds, more year-round milking, robotic milking, use of housing and yards year round, and total mixed-ration feeding. Larger herds mean longer distances to walk to and from the dairy shed, and more lameness and less time to spend on self-maintenance activities such as grooming. Holding and feeding dairy cows on yards will cause an increase in lameness and mastitis and perhaps an increase in agonistic behaviour but will reduce time spent walking. Intensification of sheep production will involve increased flock size, increased fecundity, breeding from hoggets, and breeding ewes all year round. Housing during lambing might be considered appropriate, as would feeding to lift milk yields. Increased fecundity with an increase in triplets will increase lamb mortality rates, but housing ewes, when managed well, will result in reduced lamb mortality. Intensification of lamb finishing will be by improved nutrition. Intensification of beef production will include more breeding of heifers at 15 months, and more problems with dystocia. Intensification of pastoral production will have positive and negative effects on animal welfare. The balance will be determined by the quality of management and stockmanship, and the pressure on businesses to be profitable.

Detection of bovine central nervous system tissues in rendered animal by-products by one-step real-time reverse transcription PCR assay.

PubMed

Andrievskaia, Olga; Tangorra, Erin

2014-12-01

Contamination of rendered animal byproducts with central nervous system tissues (CNST) from animals with bovine spongiform encephalopathy is considered one of the vehicles of disease transmission. Removal from the animal feed chain of CNST originated from cattle of a specified age category, species-labeling of rendered meat products, and testing of rendered products for bovine CNST are tasks associated with the epidemiological control of bovine spongiform encephalopathy. A single-step TaqMan real-time reverse transcriptase (RRT) PCR assay was developed and evaluated for specific detection of bovine glial fibrillary acidic protein (GFAP) mRNA, a biomarker of bovine CNST, in rendered animal by-products. An internal amplification control, mammalian b -actin mRNA, was coamplified in the duplex RRT-PCR assay to monitor amplification efficiency, normalize amplification signals, and avoid false-negative results. The functionality of the GFAP mRNA RRT-PCR was assessed through analysis of laboratory-generated binary mixtures of bovine central nervous system (CNS) and muscle tissues treated under various thermal settings imitating industrial conditions. The assay was able to detect as low as 0.05 % (wt/wt) bovine brain tissue in binary mixtures heat treated at 110 to 130°C for 20 to 60 min. Further evaluation of the GFAP mRNA RRT-PCR assay involved samples of industrial rendered products of various species origin and composition obtained from commercial sources and rendering plants. Low amounts of bovine GFAP mRNA were detected in several bovine-rendered products, which was in agreement with declared species composition. An accurate estimation of CNS tissue content in industrial-rendered products was complicated due to a wide range of temperature and time settings in rendering protocols. Nevertheless, the GFAP mRNA RRT-PCR assay may be considered for bovine CNS tissue detection in rendered products in combination with other available tools (for example, animal age verification) in inspection programs.

Techno-economic analysis and climate change impacts of sugarcane biorefineries considering different time horizons.

PubMed

Junqueira, Tassia L; Chagas, Mateus F; Gouveia, Vera L R; Rezende, Mylene C A F; Watanabe, Marcos D B; Jesus, Charles D F; Cavalett, Otavio; Milanez, Artur Y; Bonomi, Antonio

2017-01-01

Ethanol production from lignocellulosic feedstocks (also known as 2nd generation or 2G ethanol process) presents a great potential for reducing both ethanol production costs and climate change impacts since agricultural residues and dedicated energy crops are used as feedstock. This study aimed at the quantification of the economic and environmental impacts considering the current and future scenarios of sugarcane biorefineries taking into account not only the improvements of the industrial process but also of biomass production systems. Technology assumptions and scenarios setup were supported by main companies and stakeholders, involved in the lignocellulosic ethanol production chain from Brazil and abroad. For instance, scenarios considered higher efficiencies and lower residence times for pretreatment, enzymatic hydrolysis, and fermentation (including pentoses fermentation); higher sugarcane yields; and introduction of energy cane (a high fiber variety of cane). Ethanol production costs were estimated for different time horizons. In the short term, 2G ethanol presents higher costs compared to 1st generation (1G) ethanol. However, in the long term, 2G ethanol is more competitive, presenting remarkable lower production cost than 1G ethanol, even considering some uncertainties regarding technology and market aspects. In addition, environmental assessment showed that both 1G (in the medium and long term) and 2G ethanol can reduce climate change impacts by more than 80% when compared to gasoline. This work showed the great potential of 2G ethanol production in terms of economic and environmental aspects. These results can support new research programs and public policies designed to stimulate both production and consumption of 2G ethanol in Brazil, accelerating the path along the learning curve. Some examples of mechanisms include: incentives to the establishment of local equipment and enzyme suppliers; and specific funding programs for the development and use of energy cane.

Heparanase induced by advanced glycation end products (AGEs) promotes macrophage migration involving RAGE and PI3K/AKT pathway

PubMed Central

2013-01-01

Background Advanced glycation end products (AGEs), inflammatory-associated macrophage migration and accumulation are crucial for initiation and progression of diabetic vascular complication. Enzymatic activity of heparanase (HPA) is implicated strongly in dissemination of metastatic tumor cells and cells of the immune system. In addition, HPA enhances the phosphorylation of selected signaling molecules including AKT pathway independent of enzymatic activity. However, virtually nothing is presently known the role of HPA during macrophage migration exposed to AGEs involving signal pathway. Methods These studies were carried out in Ana-1 macrophages. Macrophage viability was measured by MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assays. HPA and AKT protein expression in macrophages are analysed by Western blotting and HPA mRNA expression by real time quantitative RT-PCR. Release of HPA was determined by ELISA. Macrophage migration was assessed by Transwell assays. Results HPA protein and mRNA were found to be increased significantly in AGEs-treated macrophages. Pretreatment with anti-HPA antibody which recognizes the nonenzymatic terminal of HPA prevented AGEs-induced AKT phosphorylation and macrophage migration. LY294002 (PI3k/AKT inhibitor) inhibited AGEs-induced macrophage migration. Furthermore, pretreatment with anti-receptor for advanced glycation end products (RAGE) antibody attenuated AGEs-induced HPA expression, AKT phosphorylation and macrophage migration. Conclusions These data indicate that AGEs-induced macrophage migration is dependent on HPA involving RAGE-HPA-PI3K/AKT pathway. The nonenzymatic activity of HPA may play a key role in AGEs-induced macrophage migration associated with inflammation in diabetic vascular complication. PMID:23442498

Remarkable Reproducibility of Enzyme Activity Profiles in Tomato Fruits Grown under Contrasting Environments Provides a Roadmap for Studies of Fruit Metabolism1[W][OPEN

PubMed Central

Biais, Benoît; Bénard, Camille; Beauvoit, Bertrand; Colombié, Sophie; Prodhomme, Duyên; Ménard, Guillaume; Bernillon, Stéphane; Gehl, Bernadette; Gautier, Hélène; Ballias, Patricia; Mazat, Jean-Pierre; Sweetlove, Lee; Génard, Michel; Gibon, Yves

2014-01-01

To assess the influence of the environment on fruit metabolism, tomato (Solanum lycopersicum ‘Moneymaker’) plants were grown under contrasting conditions (optimal for commercial, water limited, or shaded production) and locations. Samples were harvested at nine stages of development, and 36 enzyme activities of central metabolism were measured as well as protein, starch, and major metabolites, such as hexoses, sucrose, organic acids, and amino acids. The most remarkable result was the high reproducibility of enzyme activities throughout development, irrespective of conditions or location. Hierarchical clustering of enzyme activities also revealed tight relationships between metabolic pathways and phases of development. Thus, cell division was characterized by high activities of fructokinase, glucokinase, pyruvate kinase, and tricarboxylic acid cycle enzymes, indicating ATP production as a priority, whereas cell expansion was characterized by enzymes involved in the lower part of glycolysis, suggesting a metabolic reprogramming to anaplerosis. As expected, enzymes involved in the accumulation of sugars, citrate, and glutamate were strongly increased during ripening. However, a group of enzymes involved in ATP production, which is probably fueled by starch degradation, was also increased. Metabolites levels seemed more sensitive than enzymes to the environment, although such differences tended to decrease at ripening. The integration of enzyme and metabolite data obtained under contrasting growth conditions using principal component analysis suggests that, with the exceptions of alanine amino transferase and glutamate and malate dehydrogenase and malate, there are no links between single enzyme activities and metabolite time courses or levels. PMID:24474652

Interactome analysis of longitudinal pharyngeal infection of cynomolgus macaques by group A Streptococcus.

PubMed

Shea, Patrick R; Virtaneva, Kimmo; Kupko, John J; Porcella, Stephen F; Barry, William T; Wright, Fred A; Kobayashi, Scott D; Carmody, Aaron; Ireland, Robin M; Sturdevant, Daniel E; Ricklefs, Stacy M; Babar, Imran; Johnson, Claire A; Graham, Morag R; Gardner, Donald J; Bailey, John R; Parnell, Michael J; Deleo, Frank R; Musser, James M

2010-03-09

Relatively little is understood about the dynamics of global host-pathogen transcriptome changes that occur during bacterial infection of mucosal surfaces. To test the hypothesis that group A Streptococcus (GAS) infection of the oropharynx provokes a distinct host transcriptome response, we performed genome-wide transcriptome analysis using a nonhuman primate model of experimental pharyngitis. We also identified host and pathogen biological processes and individual host and pathogen gene pairs with correlated patterns of expression, suggesting interaction. For this study, 509 host genes and seven biological pathways were differentially expressed throughout the entire 32-day infection cycle. GAS infection produced an initial widespread significant decrease in expression of many host genes, including those involved in cytokine production, vesicle formation, metabolism, and signal transduction. This repression lasted until day 4, at which time a large increase in expression of host genes was observed, including those involved in protein translation, antigen presentation, and GTP-mediated signaling. The interactome analysis identified 73 host and pathogen gene pairs with correlated expression levels. We discovered significant correlations between transcripts of GAS genes involved in hyaluronic capsule production and host endocytic vesicle formation, GAS GTPases and host fibrinolytic genes, and GAS response to interaction with neutrophils. We also identified a strong signal, suggesting interaction between host gammadelta T cells and genes in the GAS mevalonic acid synthesis pathway responsible for production of isopentenyl-pyrophosphate, a short-chain phospholipid that stimulates these T cells. Taken together, our results are unique in providing a comprehensive understanding of the host-pathogen interactome during mucosal infection by a bacterial pathogen.

Determination of Microalgal Lipid Content and Fatty Acid for Biofuel Production

PubMed Central

Chen, Zhipeng; Wang, Lingfeng

2018-01-01

Biofuels produced from microalgal biomass have received growing worldwide recognition as promising alternatives to conventional petroleum-derived fuels. Among the processes involved, the downstream refinement process for the extraction of lipids from biomass greatly influences the sustainability and efficiency of the entire biofuel system. This review summarizes and compares the current techniques for the extraction and measurement of microalgal lipids, including the gravimetric methods using organic solvents, CO2-based solvents, ionic liquids and switchable solvents, Nile red lipid visualization method, sulfo-phospho-vanillin method, and the thin-layer chromatography method. Each method has its own competitive advantages and disadvantages. For example, the organic solvents-based gravimetric method is mostly used and frequently employed as a reference standard to validate other methods, but it requires large amounts of samples and is time-consuming and expensive to recover solvents also with low selectivity towards desired products. The pretreatment approaches which aimed to disrupt cells and support subsequent lipid extraction through bead beating, microwave, ultrasonication, chemical methods, and enzymatic disruption are also introduced. Moreover, the principles and procedures for the production and quantification of fatty acids are finally described in detail, involving the preparation of fatty acid methyl esters and their quantification and composition analysis by gas chromatography.

Electrophysiological study of the basal temporal language area: a convergence zone between language perception and production networks.

PubMed

Trébuchon-Da Fonseca, Agnès; Bénar, Christian-G; Bartoloméi, Fabrice; Régis, Jean; Démonet, Jean-François; Chauvel, Patrick; Liégeois-Chauvel, Catherine

2009-03-01

Regions involved in language processing have been observed in the inferior part of the left temporal lobe. Although collectively labelled 'the Basal Temporal Language Area' (BTLA), these territories are functionally heterogeneous and are involved in language perception (i.e. reading or semantic task) or language production (speech arrest after stimulation). The objective of this study was to clarify the role of BTLA in the language network in an epileptic patient who displayed jargonaphasia. Intracerebral evoked related potentials to verbal and non-verbal stimuli in auditory and visual modalities were recorded from BTLA. Time-frequency analysis was performed during ictal events. Evoked potentials and induced gamma-band activity provided direct evidence that BTLA is sensitive to language stimuli in both modalities, 350 ms after stimulation. In addition, spontaneous gamma-band discharges were recorded from this region during which we observed phonological jargon. The findings emphasize the multimodal nature of this region in speech perception. In the context of transient dysfunction, the patient's lexical semantic processing network is disrupted, reducing spoken output to meaningless phoneme combinations. This rare opportunity to study the BTLA "in vivo" demonstrates its pivotal role in lexico-semantic processing for speech production and its multimodal nature in speech perception.

Real Time Monitoring of Dissolved Organic Carbon Concentration and Disinfection By-Product Formation Potential in a Surface Water Treatment Plant with Simulaneous UV-VIS Absorbance and Fluorescence Excitation-Emission Mapping

NASA Astrophysics Data System (ADS)

Gilmore, A. M.

2015-12-01

This study describes a method based on simultaneous absorbance and fluorescence excitation-emission mapping for rapidly and accurately monitoring dissolved organic carbon concentration and disinfection by-product formation potential for surface water sourced drinking water treatment. The method enables real-time monitoring of the Dissolved Organic Carbon (DOC), absorbance at 254 nm (UVA), the Specific UV Absorbance (SUVA) as well as the Simulated Distribution System Trihalomethane (THM) Formation Potential (SDS-THMFP) for the source and treated water among other component parameters. The method primarily involves Parallel Factor Analysis (PARAFAC) decomposition of the high and lower molecular weight humic and fulvic organic component concentrations. The DOC calibration method involves calculating a single slope factor (with the intercept fixed at 0 mg/l) by linear regression for the UVA divided by the ratio of the high and low molecular weight component concentrations. This method thus corrects for the changes in the molecular weight component composition as a function of the source water composition and coagulation treatment effects. The SDS-THMFP calibration involves a multiple linear regression of the DOC, organic component ratio, chlorine residual, pH and alkalinity. Both the DOC and SDS-THMFP correlations over a period of 18 months exhibited adjusted correlation coefficients with r2 > 0.969. The parameters can be reported as a function of compliance rules associated with required % removals of DOC (as a function of alkalinity) and predicted maximum contaminant levels (MCL) of THMs. The single instrument method, which is compatible with continuous flow monitoring or grab sampling, provides a rapid (2-3 minute) and precise indicator of drinking water disinfectant treatability without the need for separate UV photometric and DOC meter measurements or independent THM determinations.

Aquatic Sciences and Its Appeal for Expeditionary Research Science Education

NASA Astrophysics Data System (ADS)

Aguilar, C.; Cuhel, R. L.

2016-02-01

Our multi-program team studies aim to develop specific "hard" and "soft" STEM skills that integrate, literally, both disciplinary and socio-economic aspects of students lives to include peer mentoring, advisement, enabling, and professional mentorship, as well as honestly productive, career-developing hands-on research. Specifically, we use Interdependent, multidisciplinary research experiences; Development and honing of specific disciplinary skill (you have to have something TO network); Use of skill in a team to produce big picture product; Interaction with varied, often outside professionals; in order to Finish with self-confidence and a marketable skill. In a given year our umbrella projects involve linked aquatic science disciplines: Analytical Chemistry; Geology; Geochemistry; Microbiology; Engineering (Remotely Operated Vehicles); and recently Policy (scientist-public engagement). We especially use expeditionary research activities aboard our research vessel in Lake Michigan, during which (a dozen at a time, from multiple programs) students: Experience ocean-scale research cruise activities; Apply a learned skill in real time to characterize a large lake; Participate in interdisciplinary teamwork; Learn interactions among biology, chemistry, geology, optics, physics for diverse aquatic habitats; and, importantly, Experience leadership as "Chief Scientist-for-a-station". These team efforts achieve beneficial outcomes: Develop self-confidence in application of skills; Enable expression of leadership capabilities; Provide opportunity to assess "love of big water"; Produce invaluable long-term dataset for the studied region (our benefit); and they are Often voted as a top influence for career decisions. These collectively have led to some positive outcomes for "historical" undergraduate participants - more than half in STEM graduate programs, only a few not still involved in a STEM career at some level, or involved as for example a lawyer in environmental policy.

Neutrophil elastase enhances IL-12p40 production by lipopolysaccharide-stimulated macrophages via transactivation of the PAR-2/EGFR/TLR4 signaling pathway.

PubMed

Yamaguchi, Rui; Yamamoto, Takatoshi; Sakamoto, Arisa; Narahara, Shinji; Sugiuchi, Hiroyuki; Yamaguchi, Yasuo

2016-07-01

Proteinase-activated receptor 2 (PAR-2) and toll-like receptor 4 (TLR4) are involved in innate immune responses and signaling cross-talk between these receptor molecules has the potential to augment an ongoing inflammatory response. The aim of this study was to evaluate the possible cooperative influence of PAR-2 and TLR4 on IL-12p40 production by macrophages after stimulation with lipopolysaccharide (LPS). During culture, GM-CSF upregulated PAR-2 expression by macrophages in a time-dependent manner. Stimulation with LPS enhanced IL-12p40 production by macrophages in a concentration-dependent manner. While human neutrophil elastase (HNE) did not induce IL-12p40 production, pretreatment of macrophages with HNE synergistically increased the IL-12p40 protein level after LPS exposure. Silencing of TLR4 with small interfering RNA blunted the synergistic enhancement of IL-12p40 by HNE combined with LPS. Silencing of β-arrestin 2, p22phox, or ERK1/2 also inhibited an increase of IL-12p40. Interestingly, transfection of macrophages with small interfering RNA duplexes for DUOX-2, EGFR, TLR4, or TRAF6 significantly blunted the increase of IL-12p40 in response to treatment with HNE plus LPS. U73122 and Rottlerin also inhibited the increased production of IL-12p40. In conclusion, HNE is involved in transactivation of TLR4 through activation of DUOX-2/EGFR and synergistically enhances IL-12p40 production by macrophages stimulated with LPS. Copyright © 2016 Elsevier Inc. All rights reserved.

Search for Double Higgs Production in the Final State with Two Photons and Two Bottom Quarks at the CMS Detector

NASA Astrophysics Data System (ADS)

Hebda, Philip Robert

A search for the production of Higgs pairs in the decay channel with two photons and two bottom quarks is reported for both resonant and nonresonant cases. The data corresponds to an integrated luminosity of 19.7 /fb of proton-proton collisions at a center-of-mass energy of 8 TeV collected by the CMS detector at the CERN Large Hardron Collider. The candidate events are selected by requiring two photons and two jets and are classified according to the number of jets tagged as coming from the hadronization of a bottom quark. The search for resonance production of two Higgs bosons through a new particle as hypothesized in extensions to the Standard Model involving a Radion or KK-graviton from models with warped extra dimensions or involving a heavy Higgs from models with supersymmetry, is performed on the resonant mass range from 260 GeV to 1100 GeV. The search for Standard Model nonresonant production of two Higgs bosons is performed; in addition a theoretical framework is explored for the analysis of anomalous values of the couplings tt¯H, HHH, and tt¯HH. The observations are consistent with background expectations. Upper limits at the 95% confidence level are extracted on the production cross section of resonant and SM nonresonant production. In particular, the Radion with a vacuum expectation of 1 TeV is observed (expected) to be excluded with masses below 0.97 TeV (0.88 TeV), while the analysis is not sensitive to the Radion with a vacuum expectation of 3 TeV. The nonresonant double Higgs cross section is observed (expected) to be excluded at 1.91 fb (1.59 fb) or 72.9 (60.7) times the NNLO Standard Model value.

Future supply chains enabled by continuous processing--opportunities and challenges. May 20-21, 2014 Continuous Manufacturing Symposium.

PubMed

Srai, Jagjit Singh; Badman, Clive; Krumme, Markus; Futran, Mauricio; Johnston, Craig

2015-03-01

This paper examines the opportunities and challenges facing the pharmaceutical industry in moving to a primarily "continuous processing"-based supply chain. The current predominantly "large batch" and centralized manufacturing system designed for the "blockbuster" drug has driven a slow-paced, inventory heavy operating model that is increasingly regarded as inflexible and unsustainable. Indeed, new markets and the rapidly evolving technology landscape will drive more product variety, shorter product life-cycles, and smaller drug volumes, which will exacerbate an already unsustainable economic model. Future supply chains will be required to enhance affordability and availability for patients and healthcare providers alike despite the increased product complexity. In this more challenging supply scenario, we examine the potential for a more pull driven, near real-time demand-based supply chain, utilizing continuous processing where appropriate as a key element of a more "flow-through" operating model. In this discussion paper on future supply chain models underpinned by developments in the continuous manufacture of pharmaceuticals, we have set out; The significant opportunities to moving to a supply chain flow-through operating model, with substantial opportunities in inventory reduction, lead-time to patient, and radically different product assurance/stability regimes. Scenarios for decentralized production models producing a greater variety of products with enhanced volume flexibility. Production, supply, and value chain footprints that are radically different from today's monolithic and centralized batch manufacturing operations. Clinical trial and drug product development cost savings that support more rapid scale-up and market entry models with early involvement of SC designers within New Product Development. The major supply chain and industrial transformational challenges that need to be addressed. The paper recognizes that although current batch operational performance in pharma is far from optimal and not necessarily an appropriate end-state benchmark for batch technology, the adoption of continuous supply chain operating models underpinned by continuous production processing, as full or hybrid solutions in selected product supply chains, can support industry transformations to deliver right-first-time quality at substantially lower inventory profiles. © 2015 Wiley Periodicals, Inc. and the American Pharmacists Association.

Grammatical Planning Units During Real-Time Sentence Production in Speakers With Agrammatic Aphasia and Healthy Speakers.

PubMed

Lee, Jiyeon; Yoshida, Masaya; Thompson, Cynthia K

2015-08-01

Grammatical encoding (GE) is impaired in agrammatic aphasia; however, the nature of such deficits remains unclear. We examined grammatical planning units during real-time sentence production in speakers with agrammatic aphasia and control speakers, testing two competing models of GE. We queried whether speakers with agrammatic aphasia produce sentences word by word without advanced planning or whether hierarchical syntactic structure (i.e., verb argument structure; VAS) is encoded as part of the advanced planning unit. Experiment 1 examined production of sentences with a predefined structure (i.e., "The A and the B are above the C") using eye tracking. Experiment 2 tested production of transitive and unaccusative sentences without a predefined sentence structure in a verb-priming study. In Experiment 1, both speakers with agrammatic aphasia and young and age-matched control speakers used word-by-word strategies, selecting the first lemma (noun A) only prior to speech onset. However, in Experiment 2, unlike controls, speakers with agrammatic aphasia preplanned transitive and unaccusative sentences, encoding VAS before speech onset. Speakers with agrammatic aphasia show incremental, word-by-word production for structurally simple sentences, requiring retrieval of multiple noun lemmas. However, when sentences involve functional (thematic to grammatical) structure building, advanced planning strategies (i.e., VAS encoding) are used. This early use of hierarchical syntactic information may provide a scaffold for impaired GE in agrammatism.

Development of real-time PCR methods to quantify patulin-producing molds in food products.

PubMed

Rodríguez, Alicia; Luque, M Isabel; Andrade, María J; Rodríguez, Mar; Asensio, Miguel A; Córdoba, Juan J

2011-09-01

Patulin is a mycotoxin produced by different Penicillium and Aspergillus strains isolated from food products. To improve food safety, the presence of patulin-producing molds in foods should be quantified. In the present work, two real-time (RTi) PCR protocols based on SYBR Green and TaqMan were developed. Thirty four patulin producers and 28 non-producers strains belonging to different species usually reported in food products were used. The patulin production was tested by mycellar electrokinetic capillary electrophoresis (MECE) and high-pressure liquid chromatography-mass spectrometry (HPLC-MS). A primer pair F-idhtrb/R-idhtrb and the probe IDHprobe were designed from the isoepoxydon dehydrogenase (idh) gene, involved in patulin biosynthesis. The functionality of the developed method was demonstrated by the high linear relationship of the standard curves constructed with the idh gene copy number and Ct values for the different patulin producers tested. The ability to quantify patulin producers of the developed SYBR Green and TaqMan assays in artificially inoculated food samples was successful, with a minimum threshold of 10 conidia g(-1) per reaction. The developed methods quantified with high efficiency fungal load in foods. These RTi-PCR protocols, are proposed to be used to quantify patulin-producing molds in food products and to prevent patulin from entering the food chain. Copyright © 2011 Elsevier Ltd. All rights reserved.

Rapid production of positron emitting labeled compounds for use in cardiology PET studies

NASA Astrophysics Data System (ADS)

Bolomey, Leonard

1985-05-01

Large scale clinical application of positron emission tomography requires a variety of short-lived positron emitting radionuclides to be produced in Curie quantities up to 20 times per day. Rapid routine production of these radiopharmaceuticals requires the collaboration of engineers and chemists to achieve production targetry compatible with high beam current (up to 100 μA) and radionuclide production in a chemical form compatible with the rapid radiochemical synthesis. Chemical processing is further complicated by the need to repeat the procedures several times per day and maintain sterility within the shielded area. At our cyclotron facility primary production targets for 11C, 13N, 15O, and 18F (half lives from 2 min to 2 h) are mounted on a vertical gantr that indexes to position the required target on the beam line. Target changes are handled under microprocessor control remotely from the control room such that all valves, cooling, evacuation of target manifold, and testing of interlocks are handled automatically. This system enables us to change targets, energy and particles in less than five minutes. Since the installation of the cyclotron up to fifteen batches of routine radiopharmaceuticals have been produced per day with very low radiation doses to all personnel involved. These radiopharmaceuticals will be used to measure perfusion, metabolism and other biochemical functions in man non invasively with PET.

The amount of ergonomics and user involvement in 151 design processes.

PubMed

Kok, Barbara N E; Slegers, Karin; Vink, Peter

2012-01-01

Ergonomics, usability and user-centered design are terms that are well known among designers. Yet, products often seem to fail to meet the users' needs, resulting in a gap between expected and experienced usability. To understand the possible causes of this gap the actions taken by the designer during the design process are studied in this paper. This can show whether and how certain actions influence the user-friendliness of the design products. The aim of this research was to understand whether ergonomic principles and methods are included in the design process, whether users are involved in this process and whether the experience of the designer (in ergonomics/user involvement) has an effect on the end product usability. In this study the design processes of 151 tangible products of students in design were analyzed. It showed that in 75% of the cases some ergonomic principles were applied. User involvement was performed in only 1/3 of the design cases. Hardly any correlation was found between the designers' experience in ergonomic principles and the way they applied it and no correlations were found between the designers' experience in user involvement and the users' involvement in the design process.

Contributions of knowledge products to health policy: a case study on the Public Health Status and Forecasts Report 2010

PubMed Central

Kok, Maarten O.; Janssen, Susan W.J.; Schuit, Albertine J.; van Oers, Hans A.M.

2016-01-01

Background: The Dutch Public Health Status and Forecasts report (PHSF Report) integrates research data and identifies future trends affecting public health in the Netherlands. To investigate how PHSF contributions to health policy can be enhanced, we analysed the development process whereby the PHSF Report for 2010 was produced (PHSF-2010). Method: To collect data, a case study approach was used along the lines of Contribution Mapping including analysis of documents from the PHSF-2010 process and interviews with actors involved. All interviews were recorded and transcribed ad verbatim and coded using an inductive code list. Results: The PHSF-2010 process included activities aimed at alignment between researchers and policy-makers, such as informal meetings. However, we identified three issues that are easily overlooked in knowledge development, but provide suggestions for enhancing contributions: awareness of divergent; continuously changing actor scenarios; vertical alignment within organizations involved and careful timing of draft products to create early adopters. Conclusion: To enhance the contributions made by an established public health report, such as the PHSF Report, it is insufficient to raise the awareness of potential users. The knowledge product must be geared to policy-makers’ needs and must be introduced into the scenarios of actors who may be less familiar. The demand for knowledge product adaptations has to be considered. This requires continuous alignment efforts in all directions: horizontal and vertical, external and internal. The findings of this study may be useful to researchers who aim to enhance the contributions of their knowledge products to health policy. PMID:27452890

Incorporating risk communication into highly pathogenic avian influenza preparedness and response efforts.

PubMed

Voss, Shauna J; Malladi, Sasidhar; Sampedro, Fernando; Snider, Tim; Goldsmith, Timothy; Hueston, William D; Lauer, Dale C; Halvorson, David A

2012-12-01

A highly pathogenic avian influenza (HPAI) outbreak in the United States will initiate a federal emergency response effort that will consist of disease control and eradication efforts, including quarantine and movement control measures. These movement control measures will not only apply to live animals but also to animal products. However, with current egg industry "just-in-time" production practices, limited storage is available to hold eggs. As a result, stop movement orders can have significant unintended negative consequences, including severe disruptions to the food supply chain. Because stakeholders' perceptions of risk vary, waiting to initiate communication efforts until an HPAI event occurs can hinder disease control efforts, including the willingness of producers to comply with the response, and also can affect consumers' demand for the product. A public-private-academic partnership was formed to assess actual risks involved in the movement of egg industry products during an HPAI event through product specific, proactive risk assessments. The risk analysis process engaged a broad representation of stakeholders and promoted effective risk management and communication strategies before an HPAI outbreak event. This multidisciplinary team used the risk assessments in the development of the United States Department of Agriculture, Highly Pathogenic Avian Influenza Secure Egg Supply Plan, a comprehensive response plan that strives to maintain continuity of business. The collaborative approach that was used demonstrates how a proactive risk communication strategy that involves many different stakeholders can be valuable in the development of a foreign animal disease response plan and build working relationships, trust, and understanding.

A series of forensic toxicology and drug seizure cases involving illicit fentanyl alone and in combination with heroin, cocaine or heroin and cocaine.

PubMed

Marinetti, Laureen J; Ehlers, Brooke J

2014-10-01

The Montgomery County Coroner's Office Toxicology Section and the Miami Valley Regional Crime Lab (MVRCL) Drug Chemistry Section have been receiving case work in drug seizures, death cases and human performance cases involving products marketed as heroin or as illicit fentanyl. Upon analysis by the Drug Chemistry Section, these products were found to contain various drug(s) including illicit fentanyl only, illicit fentanyl and heroin, illicit fentanyl and cocaine and illicit fentanyl, heroin and cocaine. Both the Chemistry and Toxicology Sections began seeing these combinations starting in late October 2013. The percentage of the combinations encountered by the MVRCL as well as the physical appearance of the product, and the results of presumptive screening tests will be discussed. The demographics of the users and the results of toxicology and autopsy findings on the decedents will also be discussed. According to regional drug task force undercover agents, there is evidence that some of the products are being sold as illicit fentanyl and not just as a heroin product. Also, there is no evidence to support that the fentanyl source is being diverted from pharmaceutical grade fentanyl. The chemistry section currently has over 109 confirmed cases, and the toxicology section currently has 81 confirmed drug deaths, 8 driving under the influence of drugs and 1 suicidal hanging. Both sections are continuing to see these cases at the present time. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Photographic and photometric enhancement of Lunar Orbiter products, projects A, B and C

NASA Technical Reports Server (NTRS)

1972-01-01

A detailed discussion is presented of the framelet joining, photometric data improvement, and statistical error analysis. The Lunar Orbiter film handling system, readout system, and the digitization are described, along with the technique of joining adjacent framelets by a using a digital computer. Time and cost estimates are given. The problems and techniques involved in improving the digitized data are discussed. It was found that spectacular improvements are possible. Program documentations are included.

A Wireless Sensor System for Real-Time Measurement of Pressure Profiles at Lower Limb Protheses to Ensure Proper Fitting

DTIC Science & Technology

2011-10-01

been developed. The next step is to develop a the base technology into a grid like mapping sensor, construct the excitation and detection circuits...the project involves advancing the base technology into a grid -like mapping se nsor, constructing the excitation and detection circuits, modifying and...further. In conclusion, the screen printing and etching process allows for precise repeat able production of sensing elements for grid fabrication

Refined Source Terms in Wave Watch 3 with Wave Breaking and Sea Spray Forecasts

DTIC Science & Technology

2016-08-05

Farmer at IOS Canada involved a novel scale analysis of breaking waves. This was motivated by the results of the model study of wave breaking onset by...timely development that needs careful examination. 4.11 Highlights of the SPANDEX study SPANDEX, the Spray Production and Dynamics Experiment, is...speed alone. To accomplish this goal, a parallel laboratory study (SPANDEX II) was undertaken to parameterize sea spray flux dependences on breaking

Gas Diffusion in Fluids Containing Bubbles

NASA Technical Reports Server (NTRS)

Zak, M.; Weinberg, M. C.

1982-01-01

Mathematical model describes movement of gases in fluid containing many bubbles. Model makes it possible to predict growth and shrink age of bubbles as function of time. New model overcomes complexities involved in analysis of varying conditions by making two simplifying assumptions. It treats bubbles as point sources, and it employs approximate expression for gas concentration gradient at liquid/bubble interface. In particular, it is expected to help in developing processes for production of high-quality optical glasses in space.

A dynamic model of soil salinity and drainage generation in irrigated agriculture: A framework for policy analysis

NASA Astrophysics Data System (ADS)

Dinar, Ariel; Aillery, Marcel P.; Moore, Michael R.

1993-06-01

This paper presents a dynamic model of irrigated agriculture that accounts for drainage generation and salinity accumulation. Critical model relationships involving crop production, soil salinity, and irrigation drainage are based on newly estimated functions derived from lysimeter field tests. The model allocates land and water inputs over time based on an intertemporal profit maximization objective function and soil salinity accumulation process. The model is applied to conditions in the San Joaquin Valley of California, where environmental degradation from irrigation drainage has become a policy issue. Findings indicate that in the absence of regulation, drainage volumes increase over time before reaching a steady state as increased quantities of water are allocated to leaching soil salts. The model is used to evaluate alternative drainage abatement scenarios involving drainage quotas and taxes, water supply quotas and taxes, and irrigation technology subsidies. In our example, direct drainage policies are more cost-effective in reducing drainage than policies operating indirectly through surface water use, although differences in cost efficiency are relatively small. In some cases, efforts to control drainage may result in increased soil salinity accumulation, with implications for long-term cropland productivity. While policy adjustments may alter the direction and duration of convergence to a steady state, findings suggest that a dynamic model specification may not be necessary due to rapid convergence to a comon steady state under selected scenarios.

Integrated Practice Improvement Solutions-Practical Steps to Operating Room Management.

PubMed

Chernov, Mikhail; Pullockaran, Janet; Vick, Angela; Leyvi, Galina; Delphin, Ellise

2016-10-01

Perioperative productivity is a vital concern for surgeons, anesthesiologists, and administrators as the OR is a major source of hospital elective admissions and revenue. Based on elements of existing Practice Improvement Methodologies (PIMs), "Integrated Practice Improvement Solutions" (IPIS) is a practical and simple solution incorporating aspects of multiple management approaches into a single open source framework to increase OR efficiency and productivity by better utilization of existing resources. OR efficiency was measured both before and after IPIS implementation using the total number of cases versus room utilization, OR/anesthesia revenue and staff overtime (OT) costs. Other parameters of efficiency, such as the first case on-time start and the turnover time (TOT) were measured in parallel. IPIS implementation resulted in increased numbers of surgical procedures performed by an average of 10.7%, and OR and anesthesia revenue increases of 18.5% and 6.9%, respectively, with a simultaneous decrease in TOT (15%) and OT for anesthesia staff (26%). The number of perioperative adverse events was stable during the two-year study period which involved a total of 20,378 patients. IPIS, an effective and flexible practice improvement model, was designed to quickly, significantly, and sustainably improve OR efficiency by better utilization of existing resources. Success of its implementation directly correlates with the involvement of and acceptance by the entire OR team and hospital administration.

Remote Sensing of Alpha and Beta Sources - Modeling Summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dignon, J; Frank, M; Cherepy, N

Evaluating the potential for optical detection of the products of interactions of energetic electrons or other particles with the background atmosphere depends on predictions of change in atmospheric concentrations of species which would generate detectable spectral signals within the range of observation. The solar blind region of the spectrum, in the ultra violet, would be the logical band for outdoor detection (see Figure 1). The chemistry relevant to these processes is composed of ion-molecule reactions involving the initially created N{sub 2}{sup +} and O{sub 2}{sup +} ions, and their subsequent interactions with ambient trace atmospheric constituents. Effective modeling of themore » atmospheric chemical system acted upon by energetic particles requires knowledge of the dominant mechanism that exchange charge and associate it with atmospheric constituents, kinetic parameters of the individual processes (see e.g. Brasseur and Solomon, 1995), and a solver for the coupled differential equations that is accurate for the very stiff set of time constants involved. The LLNL box model, VOLVO, simulates the diel cycle of trace constituent photochemistry for any point on the globe over the wide range of time scales present using a stiff Gear-type ODE solver, i.e. LSODE. It has been applied to problems such as tropospheric and stratospheric nitrogen oxides, stratospheric ozone production and loss, and tropospheric hydrocarbon oxidation. For this study we have included the appropriate ion flux.« less

Temporal Prediction Errors Affect Short-Term Memory Scanning Response Time.

PubMed

Limongi, Roberto; Silva, Angélica M

2016-11-01

The Sternberg short-term memory scanning task has been used to unveil cognitive operations involved in time perception. Participants produce time intervals during the task, and the researcher explores how task performance affects interval production - where time estimation error is the dependent variable of interest. The perspective of predictive behavior regards time estimation error as a temporal prediction error (PE), an independent variable that controls cognition, behavior, and learning. Based on this perspective, we investigated whether temporal PEs affect short-term memory scanning. Participants performed temporal predictions while they maintained information in memory. Model inference revealed that PEs affected memory scanning response time independently of the memory-set size effect. We discuss the results within the context of formal and mechanistic models of short-term memory scanning and predictive coding, a Bayes-based theory of brain function. We state the hypothesis that our finding could be associated with weak frontostriatal connections and weak striatal activity.

Stimulation of IFN-γ production by garlic lectin in mouse spleen cells: involvement of IL-12 via activation of p38 MAPK and ERK in macrophages.

PubMed

Dong, Qing; Sugiura, Tsutomu; Toyohira, Yumiko; Yoshida, Yasuhiro; Yanagihara, Nobuyuki; Karasaki, Yuji

2011-02-15

Several lectins, present in beans and edible plant products, have immuno-potentiating and anti-tumor activities. We here report the effects of garlic lectin purified from garlic bulbs on the production of cytokines such as interleukin-12 (IL-12) and interferon-γ (IFN-γ) in the mouse. Garlic lectin induced IFN-γ production in spleen cells in a bell-shaped time (24-60 h)- and concentration (0.25-2.0 mg/ml)-dependent manner. The maximal enhancement was observed at 36 h with 0.5 mg/ml of garlic lectin. The stimulatory effect of garlic lectin on IFN-γ production was completely inhibited by both actinomycin D and cycloheximide, an inhibitor of ribosomal protein synthesis and DNA-dependent RNA polymerase, respectively, and was associated with an increase in IFN-γ mRNA level. Garlic lectin also induced IL-12 production in mouse peritoneal macrophages in a concentration (0.25-1.0 mg/ml)- and bell-shaped time (3-24 h)-dependent manner. The lectin increased the phosphorylation of extracellular signal-regulated kinases (ERK) and p38 mitogen-activated protein kinase (p38 MAPK) in macrophages. Furthermore, specific pharmacological inhibitors of ERK kinase (U0126) and p38 MAPK (SB203580) also suppressed the production of IL-12 induced by garlic lectin. The present findings suggest that garlic lectin induces IL-12 production via activation of p38 MAPK and ERK in mouse macrophages, which, in turn, stimulates IFN-γ production through an increase in IFN-γ mRNA in the spleen cells. Copyright © 2010 Elsevier GmbH. All rights reserved.

Applications and Lessons Learned using Data from the Atmospheric Infrared Sounder

NASA Astrophysics Data System (ADS)

Ray, S. E.; Fetzer, E. J.; Olsen, E. T.; Lambrigtsen, B.; Pagano, T. S.; Teixeira, J.; Licata, S. J.; Hall, J. R.

2016-12-01

Applications and Lessons Learned using Data from the Atmospheric Infrared SounderSharon Ray, Jet Propulsion Laboratory, California Institute of Technology The Atmospheric Infrared Sounder (AIRS) on NASA's Aqua spacecraft has been returning daily global observations of Earth's atmospheric constituents and properties since 2002. With a 12-year data record and daily, global observations in near real-time, AIRS can play a role in applications that fall under many of the NASA Applied Sciences focus areas. AIRS' involvement in applications is two years in, so what have we learned and what are the pitfalls? AIRS has made gains in drought applications with products under consideration for inclusion in the U.S. Drought Monitor national map, as also with volcano rapid response with an internal alert system and automated products to help characterize plume extent. Efforts are underway with cold air aloft for aviation, influenza outbreak prediction, and vector borne disease. But challenges have occurred both in validation and in crossing the "valley of death" between products and decision makers. AIRS now has improved maps of standard products to be distributed in near real-time via NASA LANCE and by the Goddard DAAC as part of the Obama's administration Big Earth Data Initiative. In addition internal tools have been developed to support development and distribution of our application products. This talk will communicate the status of the AIRS applications effort along with lessons learned, and provide examples of new product imagery designed to best communicate AIRS data.

Coarse-Grained Models for Protein-Cell Membrane Interactions

PubMed Central

Bradley, Ryan; Radhakrishnan, Ravi

2015-01-01

The physiological properties of biological soft matter are the product of collective interactions, which span many time and length scales. Recent computational modeling efforts have helped illuminate experiments that characterize the ways in which proteins modulate membrane physics. Linking these models across time and length scales in a multiscale model explains how atomistic information propagates to larger scales. This paper reviews continuum modeling and coarse-grained molecular dynamics methods, which connect atomistic simulations and single-molecule experiments with the observed microscopic or mesoscale properties of soft-matter systems essential to our understanding of cells, particularly those involved in sculpting and remodeling cell membranes. PMID:26613047

Temperature dependence of the photodissociation of CO2 from high vibrational levels: 205-230 nm imaging studies of CO(X1Σ+) and O(3P, 1D) products

NASA Astrophysics Data System (ADS)

Sutradhar, S.; Samanta, B. R.; Samanta, A. K.; Reisler, H.

2017-07-01

The 205-230 nm photodissociation of vibrationally excited CO2 at temperatures up to 1800 K was studied using Resonance Enhanced Multiphoton Ionization (REMPI) and time-sliced Velocity Map Imaging (VMI). CO2 molecules seeded in He were heated in an SiC tube attached to a pulsed valve and supersonically expanded to create a molecular beam of rotationally cooled but vibrationally hot CO2. Photodissociation was observed from vibrationally excited CO2 with internal energies up to about 20 000 cm-1, and CO(X1Σ+), O(3P), and O(1D) products were detected by REMPI. The large enhancement in the absorption cross section with increasing CO2 vibrational excitation made this investigation feasible. The internal energies of heated CO2 molecules that absorbed 230 nm radiation were estimated from the kinetic energy release (KER) distributions of CO(X1Σ+) products in v″ = 0. At 230 nm, CO2 needs to have at least 4000 cm-1 of rovibrational energy to absorb the UV radiation and produce CO(X1Σ+) + O(3P). CO2 internal energies in excess of 16 000 cm-1 were confirmed by observing O(1D) products. It is likely that initial absorption from levels with high bending excitation accesses both the A1B2 and B1A2 states, explaining the nearly isotropic angular distributions of the products. CO(X1Σ+) product internal energies were estimated from REMPI spectroscopy, and the KER distributions of the CO(X1Σ+), O(3P), and O(1D) products were obtained by VMI. The CO product internal energy distributions change with increasing CO2 temperature, suggesting that more than one dynamical pathway is involved when the internal energy of CO2 (and the corresponding available energy) increases. The KER distributions of O(1D) and O(3P) show broad internal energy distributions in the CO(X1Σ+) cofragment, extending up to the maximum allowed by energy but peaking at low KER values. Although not all the observations can be explained at this time, with the aid of available theoretical studies of CO2 VUV photodissociation and O + CO recombination, it is proposed that following UV absorption, the two lowest lying triplet states, a3B2 and b3A2, and the ground electronic state are involved in the dynamical pathways that lead to product formation.

Testing two temporal upscaling schemes for the estimation of the time variability of the actual evapotranspiration

NASA Astrophysics Data System (ADS)

Maltese, A.; Capodici, F.; Ciraolo, G.; La Loggia, G.

2015-10-01

Temporal availability of grapes actual evapotranspiration is an emerging issue since vineyards farms are more and more converted from rainfed to irrigated agricultural systems. The manuscript aims to verify the accuracy of the actual evapotranspiration retrieval coupling a single source energy balance approach and two different temporal upscaling schemes. The first scheme tests the temporal upscaling of the main input variables, namely the NDVI, albedo and LST; the second scheme tests the temporal upscaling of the energy balance output, the actual evapotranspiration. The temporal upscaling schemes were implemented on: i) airborne remote sensing data acquired monthly during a whole irrigation season over a Sicilian vineyard; ii) low resolution MODIS products released daily or weekly; iii) meteorological data acquired by standard gauge stations. Daily MODIS LST products (MOD11A1) were disaggregated using the DisTrad model, 8-days black and white sky albedo products (MCD43A) allowed modeling the total albedo, and 8-days NDVI products (MOD13Q1) were modeled using the Fisher approach. Results were validated both in time and space. The temporal validation was carried out using the actual evapotranspiration measured in situ using data collected by a flux tower through the eddy covariance technique. The spatial validation involved airborne images acquired at different times from June to September 2008. Results aim to test whether the upscaling of the energy balance input or output data performed better.

The scientific production in trauma of an emerging country

PubMed Central

2012-01-01

Background The study aims to examine whether the end of specialty in trauma surgery in 2003 influenced the scientific productivity of the area in Brazil. Methods We identified and classified the manuscripts and their authors, from databases such as PubMed, Scielo and Plataforma Lattes and sites like Google, in addition to the list of members of SBAIT, the sole society in Brazil to congregate surgeons involved in trauma care in the country. We applied statistical tests to compare the periods of 1997-2003 and 2004-2010. We also analyzed the following variables: impact factor of journals in which manuscripts were published, journals, regional origin of authors, time since graduation, and conducting post-doctorate abroad. Results We observed a significant increase in publication rates of the analyzed groups over the years. There was a predominance of quantitative studies from the Southeast (especially the state of São Paulo). More time elapsed after graduation and the realization of postdoctoral studies abroad influenced the individual scientific productivity. Conclusion The number of articles published by authors from the area of trauma has been growing over the past 14 years in Brazil. The end of the specialty in trauma surgery in the country did not influence the scientific productivity in the area. PMID:23531364

Biochemical Modulation of Lipid Pathway in Microalgae Dunaliella sp. for Biodiesel Production

PubMed Central

Talebi, Ahmad Farhad; Tohidfar, Masoud; Mousavi Derazmahalleh, Seyedeh Mahsa; Sulaiman, Alawi; Baharuddin, Azhari Samsu; Tabatabaei, Meisam

2015-01-01

Exploitation of renewable sources of energy such as algal biodiesel could turn energy supplies problem around. Studies on a locally isolated strain of Dunaliella sp. showed that the mean lipid content in cultures enriched by 200 mg L−1 myoinositol was raised by around 33% (1.5 times higher than the control). Similarly, higher lipid productivity values were achieved in cultures treated by 100 and 200 mg L−1 myoinositol. Fluorometry analyses (microplate fluorescence and flow cytometry) revealed increased oil accumulation in the Nile red-stained algal samples. Moreover, it was predicted that biodiesel produced from myoinositol-treated cells possessed improved oxidative stability, cetane number, and cloud point values. From the genomic point of view, real-time analyses revealed that myoinositol negatively influenced transcript abundance of AccD gene (one of the key genes involved in lipid production pathway) due to feedback inhibition and that its positive effect must have been exerted through other genes. The findings of the current research are not to interprete that myoinositol supplementation could answer all the challenges faced in microalgal biodiesel production but instead to show that “there is a there there” for biochemical modulation strategies, which we achieved, increased algal oil quantity and enhanced resultant biodiesel quality. PMID:26146623

Biochemical Modulation of Lipid Pathway in Microalgae Dunaliella sp. for Biodiesel Production.

PubMed

Talebi, Ahmad Farhad; Tohidfar, Masoud; Mousavi Derazmahalleh, Seyedeh Mahsa; Sulaiman, Alawi; Baharuddin, Azhari Samsu; Tabatabaei, Meisam

2015-01-01

Exploitation of renewable sources of energy such as algal biodiesel could turn energy supplies problem around. Studies on a locally isolated strain of Dunaliella sp. showed that the mean lipid content in cultures enriched by 200 mg L(-1) myoinositol was raised by around 33% (1.5 times higher than the control). Similarly, higher lipid productivity values were achieved in cultures treated by 100 and 200 mg L(-1) myoinositol. Fluorometry analyses (microplate fluorescence and flow cytometry) revealed increased oil accumulation in the Nile red-stained algal samples. Moreover, it was predicted that biodiesel produced from myoinositol-treated cells possessed improved oxidative stability, cetane number, and cloud point values. From the genomic point of view, real-time analyses revealed that myoinositol negatively influenced transcript abundance of AccD gene (one of the key genes involved in lipid production pathway) due to feedback inhibition and that its positive effect must have been exerted through other genes. The findings of the current research are not to interprete that myoinositol supplementation could answer all the challenges faced in microalgal biodiesel production but instead to show that "there is a there there" for biochemical modulation strategies, which we achieved, increased algal oil quantity and enhanced resultant biodiesel quality.

Improving the Production of L-Phenylalanine by Identifying Key Enzymes Through Multi-Enzyme Reaction System in Vitro

PubMed Central

Ding, Dongqin; Liu, Yongfei; Xu, Yiran; Zheng, Ping; Li, Haixing; Zhang, Dawei; Sun, Jibin

2016-01-01

L-Phenylalanine (L-Phe) is an important amino acid used in both food and medicinal applications. We developed an in vitro system that allowed a direct, quantitative investigation of phenylalanine biosynthesis in E. coli. Here, the absolute concentrations of six enzymes (AroK, AroL, AroA, AroC, PheA and TyrB) involved in the shikimate (SHIK) pathway were determined by a quantitative proteomics approach and in vitro enzyme titration experiments. The reconstitution of an in vitro reaction system for these six enzymes was established and their effects on the phenylalanine production were tested. The results showed that the yield of phenylalanine increased 3.0 and 2.1 times when the concentrations of shikimate kinase (AroL) and 5-enolpyruvoyl shikimate 3-phosphate (EPSP) synthase (AroA) were increased 2.5 times. Consistent results were obtained from in vivo via the overexpression of AroA in a phenylalanine-producing strain, and the titer of phenylalanine reached 62.47 g/l after 48 h cultivation in a 5-liter jar fermentor. Our quantitative findings provide a practical method to detect the potential bottleneck in a specific metabolic pathway to determine which gene products should be targeted to improve the yield of the desired product. PMID:27558633

Agronomic viability of New Zealand spinach and kale intercropping.

PubMed

Cecílio, Arthur B; Bianco, Matheus S; Tardivo, Caroline F; Pugina, Gabriel C M

2017-01-01

The intercropping is a production system that aims to provide increased yield with less environmental impact, due to greater efficiency in the use of natural resources and inputs involved in the production process. An experiment was carried out to evaluate the agronomic viability of kale and New Zealand spinach intercropping as a function of the spinach transplanting time. (0, 14, 28, 42, 56, 70, 84 and 98 days after transplanting of the kale). The total yield (TY) and yield per harvest (YH) of the kale in intercropping did not differ from those obtained in monoculture. The spinach TY was influenced by the transplanting time, the earlier the transplanting, the higher the TY. The spinach YH was not influenced by the transplanting time, but rather by the cultivation system. In intercropping, the spinach YH was 13.5% lower than in monoculture. The intercropping was agronomically feasible, since the land use efficiency index, which was not influenced by the transplanting time, had an average value of 1.71, indicating that the intercropping produced 71% more kale and spinach than the same area in monoculture. Competitiveness coefficient, aggressiveness and yield loss values showed that kale is the dominating species and spinach is the dominated.

Quantifying The Food And Drug Administration's rulemaking delays highlights the need for transparency.

PubMed

Hwang, Thomas J; Avorn, Jerry; Carpenter, Daniel; Kesselheim, Aaron S

2014-02-01

The Food and Drug Administration (FDA) frequently uses its rulemaking process to establish or modify the way it regulates drugs, medical devices, and other medical products. The federal agency's rulemaking is controversial because of its perceived complexity, lack of transparency, and lengthy duration. To shed light on the FDA's rulemaking process, we examined the evolution of significant rules that the agency published during 2000-12 for drugs, devices, and other medical products. We found that the rules' median time to finalization was 7.3 years, with the pre-rule phase and postreview deliberation within the FDA accounting for the majority of that time. Rules that involved mandatory cost-benefit analyses were associated with an additional delay of approximately two years. We also found that longer review times were significantly associated with a reduction in the stringency of final rules, compared to the originally proposed versions. We recommend improving FDA's rulemaking by allocating additional resources to increase efficiency and by embarking on initiatives to promote transparency by the FDA and other parts of the executive branch.

Causes and types of health effects during the use of crop protection chemicals: data from a survey of over 6,300 smallholder applicators in 24 different countries.

PubMed

Tomenson, John A; Matthews, Graham A

2009-08-01

The present investigation looks in detail at the causes and types of health incidents reported by 6,300 mainly smallholder agrochemical users in 24 countries during 2005 and 2006. The investigation is based on a questionnaire survey of knowledge, attitude and practice that concentrated on the sequence of events from purchasing the pesticide to disposal. Information was also collected about health problems experienced while using agrochemicals. The survey targeted mainly smallholder knapsack spray operators who were expected to be at a highest risk of exposure. In the 12 months prior to interview, 1.2% of users reported an agrochemical-related incident that required hospital treatment, 5.8% reported an incident requiring at least trained medical treatment but not hospitalisation and 19.8% reported only a minor sign or symptom. Users who had experienced an incident involving agricultural equipment were 3.38 (95% CI 2.29-4.99) times more likely to experience an agrochemical-related health incident, but confident users who felt that their use of personal protective equipment while spraying was best practice were 0.60 (95% CI 0.44-0.84) times less likely to experience such an incident. Over 80% of product-related incidents were caused by insecticides and the incidence rate per spraying time for incidents linked to insecticides was significantly higher than that for fungicides or herbicides. Headache/dizziness and nausea/vomiting, often smell related, were the most common symptoms reported by users who listed agrochemical products that had caused them health problems (52 and 38% of product mentions, respectively). In most countries, the incidence of serious health effects was low; however, there was a high incidence of minor signs and symptoms in a few countries, especially in Africa. A disproportionate number of incidents occurred during insecticide use relative to the time that they were sprayed. Failure to exercise caution as indicated by whether users had incidents involving agricultural equipment or livestock, and lack of confidence in their practices were the most important predictors of agrochemical-related incidents.

The Role of Mesopontine NGF in Sleep and Wakefulness

PubMed Central

Ramos, Oscar V.; Torterolo, Pablo; Lim, Vincent; Chase, Michael H.; Sampogna, Sharon; Yamuy, Jack

2011-01-01

The microinjection of nerve growth factor (NGF) into the cat pontine tegmentum rapidly induces rapid eye movement (REM) sleep. To determine if NGF is involved in naturally-occurring REM sleep, we examined whether it is present in mesopontine cholinergic structures that promote the initiation of REM sleep, and whether the blockade of NGF production in these structures suppresses REM sleep. We found that cholinergic neurons in the cat dorsolateral mesopontine tegmentum exhibited NGF-like immunoreactivity. In addition, the microinjection of an oligodeoxyribonucleotide (OD) directed against cat NGF mRNA into this region resulted in a reduction in the time spent in REM sleep in conjunction with an increase in the time spent in wakefulness. Sleep and wakefulness returned to baseline conditions 2 to 5 days after antisense OD administration. The preceding antisense OD-induced effects occurred in conjunction with the suppression of NGF-like immunoreactivity within the site of antisense OD injection. These data support the hypothesis that NGF is involved in the modulation of naturally-occurring sleep and wakefulness. PMID:21840513

Cytomegalovirus infection in the bone marrow transplant patient.

PubMed

Bhat, Vivek; Joshi, Amit; Sarode, Rahul; Chavan, Preeti

2015-12-24

Cytomegalovirus (CMV) infection is an important contributor to the morbidity and mortality associated with bone marrow transplantation (BMT). Infection may lead to CMV disease involving multiple organs such as pneumonia, gastroenteritis, retinitis, central nervus system involvement and others. CMV seropositivity is an important risk factor and approximately half of BMT recipients will develop clinically significant infection most commonly in the first 100 d post-transplant. The commonly used tests to diagnose CMV infection in these patients include the pp65 antigenemia test and the CMV DNA polymerase chain reaction (PCR) assay. Because of its greater sensitivity and lesser turnaround time, the CMV PCR is nowadays the preferred test and serves as a main guide for pre-emptive therapy. Methods of CMV prevention include use of blood products from seronegative donors or leukodepleted products. Prophylaxis or pre-emptive therapy strategies for CMV prevention may be used post-transplant with the latter becoming more common. The commonly used antivirals for pre-emptive therapy and CMV disease management include intravenous gancyclovir and foscarnet. The role of intravenous immunoglobulin, although used commonly in CMV pneumonia is not clear.

Identification and expression pattern analysis of BoMYB51 involved in indolic glucosinolate biosynthesis from broccoli (Brassica oleracea var. italica).

PubMed

Yu, Qingyue; Hao, Guodong; Zhou, Jianxin; Wang, Jingying; Evivie, Ejiroghene Ruona; Li, Jing

2018-06-22

Glucosinolates are a class of amino acid-derived specialized metabolites characteristic of the Brassicales order. Trp derived indolic glucosinolates are essential for the effective plant defense responses to a wide range of pathogens and herbivores. In Arabidopsis, MYB51 is the key transcription factor positively regulates indolic glucosinolate production by activating certain biosynthetic genes. In this study, we report the isolation and identification of a MYB51 from broccoli designated as BoMYB51. Overexpression of BoMYB51 in Arabidopsis increased indolic glucosinolate production by upregulating biosynthetic genes and resulted in enhanced flagellin22 (Flg22) induced callose deposition. The spatial expression pattern and responsive expression of BoMYB51 to several hormones and stress treatments were investigated by expressing the β-glucuronidase (GUS) reporter gene driven by BoMYB51 promotor in Arabidopsis and quantitative real-time PCR analysis in broccoli. Our study provides information on molecular characteristics of BoMYB51 and possible physiological process BoMYB51 may involve. Copyright © 2018 Elsevier Inc. All rights reserved.

Inferring difficulty: Flexibility in the real-time processing of disfluency

PubMed Central

Heller, Daphna; Arnold, Jennifer E.; Klein, Natalie M.; Tanenhaus, Michael K.

2015-01-01

Upon hearing a disfluent referring expression, listeners expect the speaker to refer to an object that is previously-unmentioned, an object that does not have a straightforward label, or an object that requires a longer description. Two visual-world eye-tracking experiments examined whether listeners directly associate disfluency with these properties of objects, or whether disfluency attribution is more flexible and involves situation-specific inferences. Since in natural situations reference to objects that do not have a straightforward label or that require a longer description is correlated with both production difficulty and with disfluency, we used a mini artificial lexicon to dissociate difficulty from these properties, building on the fact that recently-learned names take longer to produce than existing words in one’s mental lexicon. The results demonstrate that disfluency attribution involves situation-specific inferences; we propose that in new situations listeners spontaneously infer what may cause production difficulty. However, the results show that these situation-specific inferences are limited in scope: listeners assessed difficulty relative to their own experience with the artificial names, and did not adapt to the assumed knowledge of the speaker. PMID:26677642

Molecular interactions between the olive and the fruit fly Bactrocera oleae

PubMed Central

2012-01-01

Background The fruit fly Bactrocera oleae is the primary biotic stressor of cultivated olives, causing direct and indirect damages that significantly reduce both the yield and the quality of olive oil. To study the olive-B. oleae interaction, we conducted transcriptomic and proteomic investigations of the molecular response of the drupe. The identifications of genes and proteins involved in the fruit response were performed using a Suppression Subtractive Hybridisation technique and a combined bi-dimensional electrophoresis/nanoLC-ESI-LIT-MS/MS approach, respectively. Results We identified 196 ESTs and 26 protein spots as differentially expressed in olives with larval feeding tunnels. A bioinformatic analysis of the identified non-redundant EST and protein collection indicated that different molecular processes were affected, such as stress response, phytohormone signalling, transcriptional control and primary metabolism, and that a considerable proportion of the ESTs could not be classified. The altered expression of 20 transcripts was also analysed by real-time PCR, and the most striking differences were further confirmed in the fruit of a different olive variety. We also cloned the full-length coding sequences of two genes, Oe-chitinase I and Oe-PR27, and showed that these are wound-inducible genes and activated by B. oleae punctures. Conclusions This study represents the first report that reveals the molecular players and signalling pathways involved in the interaction between the olive fruit and its most damaging biotic stressor. Drupe response is complex, involving genes and proteins involved in photosynthesis as well as in the production of ROS, the activation of different stress response pathways and the production of compounds involved in direct defence against phytophagous larvae. Among the latter, trypsin inhibitors should play a major role in drupe resistance reaction. PMID:22694925

Enhancement in production of recombinant two-chain Insulin Glargine by over-expression of Kex2 protease in Pichia pastoris.

PubMed

Sreenivas, Suma; Krishnaiah, Sateesh M; Govindappa, Nagaraja; Basavaraju, Yogesh; Kanojia, Komal; Mallikarjun, Niveditha; Natarajan, Jayaprakash; Chatterjee, Amarnath; Sastry, Kedarnath N

2015-01-01

Glargine is an analog of Insulin currently being produced by recombinant DNA technology using two different hosts namely Escherichia coli and Pichia pastoris. Production from E. coli involves the steps of extraction of inclusion bodies by cell lysis, refolding, proteolytic cleavage and purification. In P. pastoris, a single-chain precursor with appropriate disulfide bonding is secreted to the medium. Downstream processing currently involves use of trypsin which converts the precursor into two-chain final product. The use of trypsin in the process generates additional impurities due to presence of Lys and Arg residues in the Glargine molecule. In this study, we describe an alternate approach involving over-expression of endogenous Kex2 proprotein convertase, taking advantage of dibasic amino acid sequence (Arg-Arg) at the end of B-chain of Glargine. KEX2 gene over-expression in Pichia was accomplished by using promoters of varying strengths to ensure production of greater levels of fully functional two-chain Glargine product, confirmed by HPLC and mass analysis. In conclusion, this new production process involving Kex2 protease over-expression improves the downstream process efficiency, reduces the levels of impurities generated and decreases the use of raw materials.

Metabolic Engineering of Microalgal Based Biofuel Production: Prospects and Challenges.

PubMed

Banerjee, Chiranjib; Dubey, Kashyap K; Shukla, Pratyoosh

2016-01-01

The current scenario in renewable energy is focused on development of alternate and sustainable energy sources, amongst which microalgae stands as one of the promising feedstock for biofuel production. It is well known that microalgae generate much larger amounts of biofuels in a shorter time than other sources based on plant seeds. However, the greatest challenge in a transition to algae-based biofuel production is the various other complications involved in microalgal cultivation, its harvesting, concentration, drying and lipid extraction. Several green microalgae accumulate lipids, especially triacylglycerols (TAGs), which are main precursors in the production of lipid. The various aspects on metabolic pathway analysis of an oleaginous microalgae i.e., Chlamydomonas reinhardtii have elucidated some novel metabolically important genes and this enhances the lipid production in this microalgae. Adding to it, various other aspects in metabolic engineering using OptFlux and effectual bioprocess design also gives an interactive snapshot of enhancing lipid production which ultimately improvises the oil yield. This article reviews the current status of microalgal based technologies for biofuel production, bioreactor process design, flux analysis and it also provides various strategies to increase lipids accumulation via metabolic engineering.

Ergonomic factors and production target evaluation in eucalyptus timber harvesting operations in mountainous terrains.

PubMed

de Souza, Amaury Paulo; Minette, Luciano José; Sanches, André Luis Petean; da Silva, Emília Pio; Rodrigues, Valéria Antônia Justino; de Oliveira, Luciana Aparecida

2012-01-01

There are several forest operations involved in Eucalyptus timber harvesting. This study was carried out during brush-cutting; tree felling, bucking, delimbing, piling and manual extraction operations, with the following objectives: a) analyzing, ergonomically, two systems of brush-cutting: one manual and the other semi-mechanized, using two different machines; b) ergonomically evaluating three different brands of pruner machines used in delimbing felled trees. c) determining the feasible target of productivity as a function of ergonomic factors relevant to establish the time of resting pauses for workers in manual and semi-mechanized timber harvesting systems in mountainous terrain. Brush-cutting, either manual or semimechanized, is an activity carried out prior to timber harvesting. It is usually a hard work, with low productivity when compared with mechanized systems. Pruner machines have been used by forest companies, due to the great possibilities to improve productivity, quality and the health of workers. Ergonomics is a discipline that promotes the adequacy of work to the physical and mental characteristics of human beings, seeking to design production systems and products considering relevant aspects, including social, organizational and environmental factors. Companies should consider the ergonomic factor in the determination of daily worker production targets.

Spatio-temporal Dynamics of Referential and Inferential Naming: Different Brain and Cognitive Operations to Lexical Selection.

PubMed

Fargier, Raphaël; Laganaro, Marina

2017-03-01

Picture naming tasks are largely used to elicit the production of specific words and sentences in psycholinguistic and neuroimaging research. However, the generation of lexical concepts from a visual input is clearly not the exclusive way speech production is triggered. In inferential speech encoding, the concept is not provided from a visual input, but is elaborated though semantic and/or episodic associations. It is therefore likely that the cognitive operations leading to lexical selection and word encoding are different in inferential and referential expressive language. In particular, in picture naming lexical selection might ensue from a simple association between a perceptual visual representation and a word with minimal semantic processes, whereas richer semantic associations are involved in lexical retrieval in inferential situations. Here we address this hypothesis by analyzing ERP correlates during word production in a referential and an inferential task. The participants produced the same words elicited from pictures or from short written definitions. The two tasks displayed similar electrophysiological patterns only in the time-period preceding the verbal response. In the stimulus-locked ERPs waveform amplitudes and periods of stable global electrophysiological patterns differed across tasks after the P100 component and until 400-500 ms, suggesting the involvement of different, task-specific neural networks. Based on the analysis of the time-windows affected by specific semantic and lexical variables in each task, we conclude that lexical selection is underpinned by a different set of conceptual and brain processes, with semantic processes clearly preceding word retrieval in naming from definition whereas the semantic information is enriched in parallel with word retrieval in picture naming.

Stochastic dynamics of time correlation in complex systems with discrete time

NASA Astrophysics Data System (ADS)

Yulmetyev, Renat; Hänggi, Peter; Gafarov, Fail

2000-11-01

In this paper we present the concept of description of random processes in complex systems with discrete time. It involves the description of kinetics of discrete processes by means of the chain of finite-difference non-Markov equations for time correlation functions (TCFs). We have introduced the dynamic (time dependent) information Shannon entropy Si(t) where i=0,1,2,3,..., as an information measure of stochastic dynamics of time correlation (i=0) and time memory (i=1,2,3,...). The set of functions Si(t) constitute the quantitative measure of time correlation disorder (i=0) and time memory disorder (i=1,2,3,...) in complex system. The theory developed started from the careful analysis of time correlation involving dynamics of vectors set of various chaotic states. We examine two stochastic processes involving the creation and annihilation of time correlation (or time memory) in details. We carry out the analysis of vectors' dynamics employing finite-difference equations for random variables and the evolution operator describing their natural motion. The existence of TCF results in the construction of the set of projection operators by the usage of scalar product operation. Harnessing the infinite set of orthogonal dynamic random variables on a basis of Gram-Shmidt orthogonalization procedure tends to creation of infinite chain of finite-difference non-Markov kinetic equations for discrete TCFs and memory functions (MFs). The solution of the equations above thereof brings to the recurrence relations between the TCF and MF of senior and junior orders. This offers new opportunities for detecting the frequency spectra of power of entropy function Si(t) for time correlation (i=0) and time memory (i=1,2,3,...). The results obtained offer considerable scope for attack on stochastic dynamics of discrete random processes in a complex systems. Application of this technique on the analysis of stochastic dynamics of RR intervals from human ECG's shows convincing evidence for a non-Markovian phenomemena associated with a peculiarities in short- and long-range scaling. This method may be of use in distinguishing healthy from pathologic data sets based in differences in these non-Markovian properties.

Monitoring N2O Production Using a cNOR Modeled Active Site

NASA Astrophysics Data System (ADS)

Griffiths, Z. G.; Hegg, E. L.; Finders, C.; Haslun, J. A.

2017-12-01

Nitrous oxide (N2O) is a potent greenhouse gas with a 100-year global warming potential 265-296 times greater than carbon dioxide (CO2). It is the leading contributor to ozone depletion and can persist in the stratosphere for approximately 114 years. Hence, understanding the sources of atmospheric N2O emissions is critical to remediating the effects of climate change. Agricultural activities are the largest contributor to N2O emissions in the U.S. with microbial nitrification and denitrification as the dominating soil processes. The enzyme cytochrome c nitric oxide reductase (cNOR) is involved in bacterial denitrification. It is often difficult to study the enzymes involved in biotic N2O production, hence, model enzymes are a useful tool. The enzyme I107EFeBMb, a sperm whale myoglobin derivative, models the active site of cNOR and was used to simulate the anaerobic reduction of NO to N2O by cNOR. Dithionite was used to induce the catalytic activity of I107EFeBMb by reducing the enzyme. However, dithionite is a strong reductant that is capable of reducing NO to N2O directly. Therefore, the dithionite-enzyme mixture was passed through a size-exclusion column to isolate the reduced enzyme. This reduced and purified enzyme was then utilized to investigate N2O production from NO. This project will provide both an enzymatic and abiotic model to study N2O production.

sxtA-Based Quantitative Molecular Assay To Identify Saxitoxin-Producing Harmful Algal Blooms in Marine Waters ▿ †

PubMed Central

Murray, Shauna A.; Wiese, Maria; Stüken, Anke; Brett, Steve; Kellmann, Ralf; Hallegraeff, Gustaaf; Neilan, Brett A.

2011-01-01

The recent identification of genes involved in the production of the potent neurotoxin and keystone metabolite saxitoxin (STX) in marine eukaryotic phytoplankton has allowed us for the first time to develop molecular genetic methods to investigate the chemical ecology of harmful algal blooms in situ. We present a novel method for detecting and quantifying the potential for STX production in marine environmental samples. Our assay detects a domain of the gene sxtA that encodes a unique enzyme putatively involved in the sxt pathway in marine dinoflagellates, sxtA4. A product of the correct size was recovered from nine strains of four species of STX-producing Alexandrium and Gymnodinium catenatum and was not detected in the non-STX-producing Alexandrium species, other dinoflagellate cultures, or an environmental sample that did not contain known STX-producing species. However, sxtA4 was also detected in the non-STX-producing strain of Alexandrium tamarense, Tasmanian ribotype. We investigated the copy number of sxtA4 in three strains of Alexandrium catenella and found it to be relatively constant among strains. Using our novel method, we detected and quantified sxtA4 in three environmental blooms of Alexandrium catenella that led to STX uptake in oysters. We conclude that this method shows promise as an accurate, fast, and cost-effective means of quantifying the potential for STX production in marine samples and will be useful for biological oceanographic research and harmful algal bloom monitoring. PMID:21841034

[Cytokines and their role in reproductive system].

PubMed

Ianchiĭ, R I; Voznesens'ka, T Iu; Shepel', O A

2007-01-01

In this review we analyze the involvement of cytokines in regulation of ovarian function. A growing body of evidence suggests that the ovary is a site of inflammatory reactions. Immune-competent cells present within the ovary may constitute potential in-situ modulators of ovarian function that act through local secretion of regulatory soluble factors cytokines. In addition many over cell in the ovary also produce cytokines independently of the presence of leukocytes, thus ovaries are sites of cytokine action and production. There are many evidences that cytokines are involved in the ovarian control of follicular development and are surveyed as the important regulators of steroidogenesis and gamete production. It is established that cytokines generally inhibit gonadotropin-stimulated production of steroids. However ovarian steroids, in turn, reduce the cytokine production by immunecompetent cells. There are some data about participation of cytokines in regulating the proliferation and differentiation of granulose cells. Most cytokines appear in mammalian follicles only a short time before ovulation and play the important role in process of ovulation and luteinization. Thus a variety of clinical situations may be due to cytokine action in the gonads, and therapeutic manipulation of the immune system may affect reproductive function. Moreover the findings about the expression of some cytokines by oocytes and their presence in follicular fluid provide further evidence and substantiate the physiologic role for their in ovarian function, and may lead to clinical applications in programs of in vitro fertilization and in diagnosis and treatment of infertility in women, especially in cases attributed to ovarian dysfunction.

Increasing productivity by matching farming system management and genotype in water-limited environments.

PubMed

Kirkegaard, J A; Hunt, J R

2010-10-01

Improvements in water productivity and yield arise from interactions between varieties (G) and their management (M). Most G×M interactions considered by breeders and physiologists focus on in-crop management (e.g. sowing time, plant density, N management). However, opportunities exist to capture more water and use it more effectively that involve judicious management of prior crops and fallows (e.g. crop sequence, weed control, residue management). The dry-land wheat production system of southern Australia, augmented by simulation studies, is used to demonstrate the relative impacts and interactions of a range of pre-crop and in-crop management decisions on water productivity. A specific case study reveals how a novel genetic trait, long coleoptiles that enable deeper sowing, can interact with different management options to increase the water-limited yield of wheat from 1.6 t ha(-1) to 4.5 t ha(-1), reflecting the experience of leading growers. Understanding such interactions will be necessary to capture benefits from new varieties within the farming systems of the future.

Application of near infrared spectroscopy to the analysis and fast quality assessment of traditional Chinese medicinal products

PubMed Central

Zhang, Chao; Su, Jinghua

2014-01-01

Near infrared spectroscopy (NIRS) has been widely applied in both qualitative and quantitative analysis. There is growing interest in its application to traditional Chinese medicine (TCM) and a review of recent developments in the field is timely. To present an overview of recent applications of NIRS to the identification, classification and analysis of TCM products, studies describing the application of NIRS to TCM products are classified into those involving qualitative and quantitative analysis. In addition, the application of NIRS to the detection of illegal additives and the rapid assessment of quality of TCMs by fast inspection are also described. This review covers over 100 studies emphasizing the application of NIRS in different fields. Furthermore, basic analytical principles and specific examples are used to illustrate the feasibility and effectiveness of NIRS in pattern identification. NIRS provides an effective and powerful tool for the qualitative and quantitative analysis of TCM products. PMID:26579382

High-rate synthesis of phosphine-stabilized undecagold nanoclusters using a multilayered micromixer.

PubMed

Jin, Hyung Dae; Garrison, Anna; Tseng, T; Paul, Brian K; Chang, Chih-Hung

2010-11-05

Growth in the potential applications of nanomaterials has led to a focus on the development of new manufacturing approaches for these materials. In particular, an increased demand due to the unique properties of nanomaterials requires a substantial yield of high-performance materials and a simultaneous reduction in the environmental impact of these processes. In this paper, a high-rate production of phosphine-stabilized undecagold nanoclusters was achieved using a layer-up strategy which involves the use of microlamination architectures; the patterning and bonding of thin layers of material (laminae) to create a multilayered micromixer in the range of 25-250 µm thick was used to step up the production of phosphine-stabilized undecagold nanoclusters. The continuous production of highly monodispersed phosphine-stabilized undecagold nanoclusters at a rate of about 11.8 (mg s(-1)) was achieved using a microreactor with a size of 1.687 cm(3). This result is about 500 times over conventional batch syntheses based on the production rate per reactor volume.

High-rate synthesis of phosphine-stabilized undecagold nanoclusters using a multilayered micromixer

NASA Astrophysics Data System (ADS)

Jin, Hyung Dae; Garrison, Anna; Tseng, T.; Paul, Brian K.; Chang, Chih-Hung

2010-11-01

Growth in the potential applications of nanomaterials has led to a focus on the development of new manufacturing approaches for these materials. In particular, an increased demand due to the unique properties of nanomaterials requires a substantial yield of high-performance materials and a simultaneous reduction in the environmental impact of these processes. In this paper, a high-rate production of phosphine-stabilized undecagold nanoclusters was achieved using a layer-up strategy which involves the use of microlamination architectures; the patterning and bonding of thin layers of material (laminae) to create a multilayered micromixer in the range of 25-250 µm thick was used to step up the production of phosphine-stabilized undecagold nanoclusters. The continuous production of highly monodispersed phosphine-stabilized undecagold nanoclusters at a rate of about 11.8 (mg s - 1) was achieved using a microreactor with a size of 1.687 cm3. This result is about 500 times over conventional batch syntheses based on the production rate per reactor volume.

Trends in the biosynthesis and production of the immunosuppressant tacrolimus (FK506).

PubMed

Barreiro, Carlos; Martínez-Castro, Miriam

2014-01-01

The current off-patent state of tacrolimus (FK506) has opened the hunting season for new generic pharmaceutical formulations of this immunosuppressant. This fact has boosted the scientific and industrial research on tacrolimus for the last 5 years in order to improve its production. The fast discovery of tacrolimus producer strains has generated a huge number of producers, which presents the biosynthetic cluster of FK506 as a high promiscuous genetic region. For the first time, the current state-of-the-art on the tacrolimus biosynthesis, production improvements and drug purification is reviewed. On one hand, all the genes involved in the tacrolimus biosynthesis, in addition to the traditional PKS/NRPS, as well as their regulation are analysed. On the other hand, tacrolimus direct and indirect precursors are reviewed as a straight manner to improve the final yield, which is a current trend in the field. Twenty years of industrial and scientific improvements on tacrolimus production are summarised, whereas future trends are also drafted.

Post Processing Methods used to Improve Surface Finish of Products which are Manufactured by Additive Manufacturing Technologies: A Review

NASA Astrophysics Data System (ADS)

Kumbhar, N. N.; Mulay, A. V.

2016-08-01

The Additive Manufacturing (AM) processes open the possibility to go directly from Computer-Aided Design (CAD) to a physical prototype. These prototypes are used as test models before it is finalized as well as sometimes as a final product. Additive Manufacturing has many advantages over the traditional process used to develop a product such as allowing early customer involvement in product development, complex shape generation and also save time as well as money. Additive manufacturing also possess some special challenges that are usually worth overcoming such as Poor Surface quality, Physical Properties and use of specific raw material for manufacturing. To improve the surface quality several attempts had been made by controlling various process parameters of Additive manufacturing and also applying different post processing techniques on components manufactured by Additive manufacturing. The main objective of this work is to document an extensive literature review in the general area of post processing techniques which are used in Additive manufacturing.

Combined Landsat-8 and Sentinel-2 Burned Area Mapping

NASA Astrophysics Data System (ADS)

Huang, H.; Roy, D. P.; Zhang, H.; Boschetti, L.; Yan, L.; Li, Z.

2017-12-01

Fire products derived from coarse spatial resolution satellite data have become an important source of information for the multiple user communities involved in fire science and applications. The advent of the MODIS on NASA's Terra and Aqua satellites enabled systematic production of 500m global burned area maps. There is, however, an unequivocal demand for systematically generated higher spatial resolution burned area products, in particular to examine the role of small-fires for various applications. Moderate spatial resolution contemporaneous satellite data from Landsat-8 and the Sentinel-2A and -2B sensors provide the opportunity for detailed spatial mapping of burned areas. Combined, these polar-orbiting systems provide 10m to 30m multi-spectral global coverage more than once every three days. This NASA funded research presents results to prototype a combined Landsat-8 Sentinel-2 burned area product. The Landsat-8 and Sentinel-2 pre-processing, the time-series burned area mapping algorithm, and preliminary results and validation using high spatial resolution commercial satellite data over Africa are presented.

Evaluation of anaerobic degradation, biogas and digestate production of cereal silages using nylon-bags.

PubMed

Negri, Marco; Bacenetti, Jacopo; Fiala, Marco; Bocchi, Stefano

2016-06-01

In this study, the degradation efficiency and the biogas and digestate production during anaerobic digestion were evaluated for the cereal silages most used to feed biogas plants. To this purpose, silages of: maize from the whole plant, maize from the ear, triticale and wheat were digested, inside of nylon bags, in laboratory scale digesters, for 75days. Overall, the test involved 288 nylon bags. After 75days of digestion, the maize ear silage shows the highest degradation efficiency (about 98%) while wheat silage the lowest (about 83%). The biogas production ranges from 438 to 852Nm(3)/t of dry matter for wheat and ear maize silage, respectively. For all the cereal silages, the degradation as well as the biogas production are faster at the beginning of the digestion time. Digestate mass, expressed as percentage of the fresh matter, ranges from 38% to 84% for wheat and maize ear silage, respectively. Copyright © 2016 Elsevier Ltd. All rights reserved.

Chitosan multiple addition enhances laccase production from Trametes versicolor.

PubMed

Adekunle, Abiodun Emmanuel; Wang, Feng; Hu, Jianhua; Ma, Anzhou; Guo, Chen; Zhuang, Guoqiang; Liu, Chun-Zhao

2015-10-01

Chitosan multiple addition strategy was developed to improve laccase production from Trametes versicolor cultures. The optimized multiple addition strategy was carried out by two-time addition of 0.1 g L(-1) chitosan to a 2-day-old culture media, with 24-h interval between the treatments. Under these conditions, laccase activity of 644.9 U l(-1) was achieved on the seventh day and laccase production was improved by 93.5 % higher than the control. Chitosan treatment increased reactive oxygen species generation and extracellular protein concentration in the treated mycelia. In contrast, the inducer inhibited the mycelia growth. The result of the quantitative reverse transcription polymerase chain reaction showed that the copy number of the laccase gene transcript increased by 16.7-fold in the treated mycelia relative to the control. This study provides insight into some of the intrinsic metabolic processes involved in the upregulation of laccase production in the presence of chitosan inducer in fungal culture.

Remotely Sensed Imagery from USGS: Update on Products and Portals

NASA Astrophysics Data System (ADS)

Lamb, R.; Lemig, K.

2016-12-01

The USGS Earth Resources Observation and Science (EROS) Center has recently implemented a number of additions and changes to its existing suite of products and user access systems. Together, these changes will enhance the accessibility, breadth, and usability of the remotely sensed image products and delivery mechanisms available from USGS. As of late 2016, several new image products are now available for public download at no charge from USGS/EROS Center. These new products include: (1) global Level 1T (precision terrain-corrected) products from Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER), provided via NASA's Land Processes Distributed Active Archive Center (LP DAAC); and (2) Sentinel-2 Multispectral Instrument (MSI) products, available through a collaborative effort with the European Space Agency (ESA). Other new products are also planned to become available soon. In an effort to enable future scientific analysis of the full 40+ year Landsat archive, the USGS also introduced a new "Collection Management" strategy for all Landsat Level 1 products. This new archive and access schema involves quality-based tier designations that will support future time series analysis of the historic Landsat archive at the pixel level. Along with the quality tier designations, the USGS has also implemented a number of other Level 1 product improvements to support Landsat science applications, including: enhanced metadata, improved geometric processing, refined quality assessment information, and angle coefficient files. The full USGS Landsat archive is now being reprocessed in accordance with the new `Collection 1' specifications. Several USGS data access and visualization systems have also seen major upgrades. These user interfaces include a new version of the USGS LandsatLook Viewer which was released in Fall 2017 to provide enhanced functionality and Sentinel-2 visualization and access support. A beta release of the USGS Global Visualization Tool ("GloVis Next") was also released in Fall 2017, with many new features including data visualization at full resolution. The USGS also introduced a time-enabled web mapping service (WMS) to support time-based access to the existing LandsatLook "natural color" full-resolution browse image services.

Genetic Manipulation of Palmitoylethanolamide Production and Inactivation in Saccharomyces cerevisiae

PubMed Central

Muccioli, Giulio G.; Sia, Angela; Muchowski, Paul J.; Stella, Nephi

2009-01-01

Background Lipids can act as signaling molecules, activating intracellular and membrane-associated receptors to regulate physiological functions. To understand how a newly discovered signaling lipid functions, it is necessary to identify and characterize the enzymes involved in their production and inactivation. The signaling lipid N-palmitoylethanolamine (PEA) is known to activate intracellular and membrane-associated receptors and regulate physiological functions, but little is known about the enzymes involved in its production and inactivation. Principal Findings Here we show that Saccharomyces cerevisiae produce and inactivate PEA, suggesting that genetic manipulations of this lower eukaryote may be used to identify the enzymes involved in PEA metabolism. Accordingly, using single gene deletion mutants, we identified yeast genes that control PEA metabolism, including SPO14 (a yeast homologue of the mammalian phospholipase D) that controls PEA production and YJU3 (a yeast homologue of the mammalian monoacylglycerol lipase) that controls PEA inactivation. We also found that PEA metabolism is affected by heterologous expression of two mammalian proteins involved in neurodegenerative diseases, namely huntingtin and α-synuclein. Significance Together these findings show that forward and reverse genetics in S. cerevisiae can be used to identify proteins involved in PEA production and inactivation, and suggest that mutated proteins causing neurodegenerative diseases might affect the metabolism of this important signaling lipid. PMID:19529773

Effects of consumer motives on search behavior using internet advertising.

PubMed

Yang, Kenneth C C

2004-08-01

Past studies on uses and gratifications theory suggested that consumer motives affect how they will use media and media contents. Recent advertising research has extended the theory to study the use of Internet advertising. The current study explores the effects of consumer motives on their search behavior using Internet advertising. The study employed a 2 by 2 between-subjects factorial experiment design. A total of 120 subjects were assigned to an experiment condition that contains an Internet advertisement varying by advertising appeals (i.e., rational vs. emotional) and product involvement levels (high vs. low). Consumer search behavior (measured by the depth, breadth, total amount of search), demographics, and motives were collected by post-experiment questionnaires. Because all three dependent variables measuring search behavior were conceptually related to each other, MANCOVA procedures were employed to examine the moderating effects of consumer motives on the dependent variables in four product involvement-advertising appeal conditions. Results indicated that main effects for product involvements and advertising appeals were statistically significant. Univariate ANOVA also showed that advertising appeals and product involvement levels influenced the total amount of search. Three-way interactions among advertising appeals, product involvement levels, and information motive were also statistically significant. Implications and future research directions are discussed.

The importance of male partner involvement for women's acceptability and adherence to female-initiated HIV prevention methods in Zimbabwe.

PubMed

Montgomery, Elizabeth T; van der Straten, Ariane; Chidanyika, Agnes; Chipato, Tsungai; Jaffar, Shabbar; Padian, Nancy

2011-07-01

Enlisting male partner involvement is perceived as an important component of women's successful uptake of female-initiated HIV prevention methods. We conducted a longitudinal study among a cohort of 955 Zimbabwean women participating in a clinical trial of the effectiveness of a female-initiated HIV prevention method (the diaphragm and lubricant gel) to: (a) describe the extent to which women involved their male partners in the decision to use the study products, and (b) measure the effect perceived male partner support had on their acceptability and consistent use of these methods. Reported levels of male partner involvement in discussions and decisions regarding: joining the study, study activities, the outcome of HIV/STI test results, and product use were very high. In multivariate analyses, regular disclosure of study product use and partner approval for the diaphragm and gel were significantly associated with women's acceptability and consistent use of the products; an essential component for determining efficacy of investigational prevention methods. These results support the need for more sophisticated measurement of how couples interact to make decisions that impact study participation and investigational product use as well as more rigorous adaptations and evaluations of existing strategies to involve male partners in female-initiated HIV prevention trials.

Hepatic gene expression involved in glucose and lipid metabolism in transition cows: effects of fat mobilization during early lactation in relation to milk performance and metabolic changes.

PubMed

Weber, C; Hametner, C; Tuchscherer, A; Losand, B; Kanitz, E; Otten, W; Sauerwein, H; Bruckmaier, R M; Becker, F; Kanitz, W; Hammon, H M

2013-09-01

Insufficient feed intake during early lactation results in elevated body fat mobilization to meet energy demands for milk production. Hepatic energy metabolism is involved by increasing endogenous glucose production and hepatic glucose output for milk synthesis and by adaptation of postcalving fuel oxidation. Given that cows differ in their degree of fat mobilization around parturition, indicated by variable total liver fat concentration (LFC), the study investigated the influence of peripartum fat mobilization on hepatic gene expression involved in gluconeogenesis, fatty acid oxidation, ketogenesis, and cholesterol synthesis, as well as transcriptional factors referring to energy metabolism. German Holstein cows were grouped according to mean total LFC on d 1, 14, and 28 after parturition as low [<200mg of total fat/g of dry matter (DM); n=10], medium (200-300 mg of total fat/g of DM; n=10), and high (>300 mg of total fat/g of DM; n=7), indicating fat mobilization during early lactation. Cows were fed total mixed rations ad libitum and held under equal conditions. Liver biopsies were taken at d 56 and 15 before and d 1, 14, 28, and 49 after parturition to measure mRNA abundances of pyruvate carboxylase (PC); phosphoenolpyruvate carboxykinase; glucose-6-phosphatase; propionyl-coenzyme A (CoA) carboxylase α; carnitine palmitoyl-transferase 1A (CPT1A); acyl-CoA synthetase, long chain 1 (ASCL1); acyl-CoA dehydrogenase, very long chain; 3-hydroxy-3-methylglutaryl-CoA synthase 1 and 2; sterol regulatory element-binding factor 1; and peroxisome proliferator-activated factor α. Total LFC postpartum differed greatly among cows, and the mRNA abundance of most enzymes and transcription factors changed with time during the experimental period. Abundance of PC mRNA increased at parturition to a greater extent in high- and medium-LFC groups than in the low-LFC group. Significant LFC × time interactions for ACSL1 and CPT1A during the experimental period indicated variable gene expression depending on LFC after parturition. Correlations between hepatic gene expression and performance data and plasma concentrations of metabolites and hormones showed time-specific relations during the transition period. Elevated body fat mobilization during early lactation affected gene expression involved in gluconeogenesis to a greater extent than gene expression involved in lipid metabolism, indicating the dependence of hepatic glucose metabolism on hepatic lipid status and fat mobilization during early lactation. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Role of excited N2 in the production of nitric oxide

NASA Astrophysics Data System (ADS)

Campbell, L.; Cartwright, D. C.; Brunger, M. J.

2007-08-01

Excited N2 plays a role in a number of atmospheric processes, including auroral and dayglow emissions, chemical reactions, recombination of free electrons, and the production of nitric oxide. Electron impact excitation of N2 is followed by radiative decay through a series of excited states, contributing to auroral and dayglow emissions. These processes are intertwined with various chemical reactions and collisional quenching involving the excited and ground state vibrational levels. Statistical equilibrium and time step atmospheric models are used to predict N2 excited state densities and emissions (as a test against previous models and measurements) and to investigate the role of excited nitrogen in the production of nitric oxide. These calculations predict that inclusion of the reaction N2[A3Σu +] + O, to generate NO, produces an increase by a factor of up to three in the calculated NO density at some altitudes.

A case study on open innovation on Procter & Gamble. Part I: Innovation strategy over years

NASA Astrophysics Data System (ADS)

Agafitei, I. G.; Avasilcai, S.

2015-11-01

The purpose of the present paper is to analyse how product innovation process has been organized by a multinational company, such as Procter & Gamble. Since open innovation is a new approach on the local market, we have chosen to conduct a research in form of a case study showing the steps that the company has taken in order to involve other organizations to contribute to the development of new products. The paper will first describe what innovation management theory is suggesting. Following this, the mission and vision of Procter & Gamble will be analysed emphasizing its innovation efforts in time. The approach that the company has nowadays, related to development of new products, has its roots in several complex initiatives in the past, initiatives that have in their central attention the customer. Finally, it provides the research limitations and implications for future analysis on the case of Procter & Gamble open innovation approach.

Ultrasound-assisted oxidative process for sulfur removal from petroleum product feedstock.

PubMed

Mello, Paola de A; Duarte, Fábio A; Nunes, Matheus A G; Alencar, Mauricio S; Moreira, Elizabeth M; Korn, Mauro; Dressler, Valderi L; Flores, Erico M M

2009-08-01

A procedure using ultrasonic irradiation is proposed for sulfur removal of a petroleum product feedstock. The procedure involves the combination of a peroxyacid and ultrasound-assisted treatment in order to comply with the required sulfur content recommended by the current regulations for fuels. The ultrasound-assisted oxidative desulfurization (UAOD) process was applied to a petroleum product feedstock using dibenzothiophene as a model sulfur compound. The influence of ultrasonic irradiation time, oxidizing reagents amount, kind of solvent for the extraction step and kind of organic acid were investigated. The use of ultrasonic irradiation allowed higher efficiency for sulfur removal in comparison to experiments performed without its application, under the same reactional conditions. Using the optimized conditions for UAOD, the sulfur removal was about 95% after 9min of ultrasonic irradiation (20kHz, 750W, run at 40%), using hydrogen peroxide and acetic acid, followed by extraction with methanol.

Experimental evidence of {alpha}-olefin readsorption in Fischer-Tropsch synthesis on ruthenium-supported ETS-10 titanium silicate catalysts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bianchi, C.L.; Ragaini, V.

1997-05-01

Fischer-Tropsch synthesis seems to develop the following two consecutive paths: a primary process that involves the formation of {alpha}-olefin products and a secondary process leading to the production of branched isomers and paraffins and requiring the readsorption of primary {alpha}-olefin products. It was already shown by Iglesia et al. that such readsorption steps are of fundamental importance for Ru catalysts and that they occur due to the slow diffusive removal of {alpha}-olefins when the molecular size increases, this resulting in a long intraparticle residence time. In the present paper {alpha}-olefins readsorption was enhanced by changing the metal distribution inside themore » pores of a titanium silicate (ETS-10), modified by ion exchange with alkali metal ions, used as a support for Ru-based catalysts. 24 refs., 5 figs., 3 tabs.« less

Media attention to GM food cases: An innovation perspective.

PubMed

Flipse, Steven M; Osseweijer, Patricia

2013-02-01

Media attention to genetically modified (GM) foods has been described as negative, especially in Europe. At the turn of the century appreciation of GM foods was at an all-time low in Europe. Food manufacturers are still careful in the use, development and communication of GM based food products, and their caution influences innovation processes. In this study we explore the link between media attention and innovation practice. Media attention to three specific high-profile GM food cases is described and linked to innovation practice. We elucidate the order of events in these cases and show that publics could only to a limited extent have formed an opinion on GM based food products based on scientifically valid data through written English media. Innovators in food biotechnology may benefit from this knowledge for future product development and marketing, and we suggest that innovation may benefit from early stakeholder involvement and communication activities.

Differential effects of grammatical gender and gender inflection in bare noun production.

PubMed

Paolieri, Daniela; Lotto, Lorella; Leoncini, Debora; Cubelli, Roberto; Job, Remo

2011-02-01

In a new series of experiments with the picture-word interference paradigm, we replicated the grammatical gender interference effect in bare noun production in Italian: naming times are slower to picture-word noun pairs sharing the same gender. This effect is independent from the morphological transparency for gender, but responses are significantly slower when the distracters are transparent for gender. Overall, the pattern of results supports the assumption that in bare noun production grammatical gender is always selected, at least in languages like Italian. We assume that the differential effects of the nominal endings are due to the mechanisms involved in the recognition of grammatical gender of the distracter nouns which are sensitive to the morphological transparency for gender: lexical representation of transparent written words leads to a higher level of activation, thus resulting in stronger gender interference. ©2010 The British Psychological Society.

Yeast ecology of Kombucha fermentation.

PubMed

Teoh, Ai Leng; Heard, Gillian; Cox, Julian

2004-09-01

Kombucha is a traditional fermentation of sweetened tea, involving a symbiosis of yeast species and acetic acid bacteria. Despite reports of different yeast species being associated with the fermentation, little is known of the quantitative ecology of yeasts in Kombucha. Using oxytetracycline-supplemented malt extract agar, yeasts were isolated from four commercially available Kombucha products and identified using conventional biochemical and physiological tests. During the fermentation of each of the four products, yeasts were enumerated from both the cellulosic pellicle and liquor of the Kombucha. The number and diversity of species varied between products, but included Brettanomyces bruxellensis, Candida stellata, Schizosaccharomyces pombe, Torulaspora delbrueckii and Zygosaccharomyces bailii. While these yeast species are known to occur in Kombucha, the enumeration of each species present throughout fermentation of each of the four Kombucha cultures demonstrated for the first time the dynamic nature of the yeast ecology. Kombucha fermentation is, in general, initiated by osmotolerant species, succeeded and ultimately dominated by acid-tolerant species.

Cleaner production in a remanufacturing process of air compressors.

PubMed

Esquer, Javier; Arvayo, Jose Angel; Alvarez-Chavez, Clara Rosalia; Munguia-Vega, Nora Elba; Velazquez, Luis

2017-03-01

This article provides relevant results of a cleaner production program conducted in a company dedicated to remanufacturing air compressors in the city of Hermosillo, Sonora, Mexico. The overall study design was based on an integration of acknowledged cleaner production and pollution prevention programs. Although this kind of program also involves environmental issues, this study focused on occupational health and safety by addressing different aspects of the work environment: ergonomic, physical (noise and lighting), and chemical. Particularly, ergonomic aspects were evaluated through the Modular Arrangement of Predetermined Time Standards (MODAPTS) method. For physical aspects, noise and lighting were addressed through Standard No. NOM-011-STPS-2001 and Standard No. NOM-025-STPS-2008 respectively. In addition, chemical aspects were analyzed through material safety data sheets and different search tools. Root causes of each risk were identified, and options to prevent, eliminate, and/or reduce each risk have been provided.

Optimization to the Culture Conditions for Phellinus Production with Regression Analysis and Gene-Set Based Genetic Algorithm

PubMed Central

Li, Zhongwei; Xin, Yuezhen; Wang, Xun; Sun, Beibei; Xia, Shengyu; Li, Hui

2016-01-01

Phellinus is a kind of fungus and is known as one of the elemental components in drugs to avoid cancers. With the purpose of finding optimized culture conditions for Phellinus production in the laboratory, plenty of experiments focusing on single factor were operated and large scale of experimental data were generated. In this work, we use the data collected from experiments for regression analysis, and then a mathematical model of predicting Phellinus production is achieved. Subsequently, a gene-set based genetic algorithm is developed to optimize the values of parameters involved in culture conditions, including inoculum size, PH value, initial liquid volume, temperature, seed age, fermentation time, and rotation speed. These optimized values of the parameters have accordance with biological experimental results, which indicate that our method has a good predictability for culture conditions optimization. PMID:27610365

Pupillary dynamics reveal computational cost in sentence planning.

PubMed

Sevilla, Yamila; Maldonado, Mora; Shalóm, Diego E

2014-01-01

This study investigated the computational cost associated with grammatical planning in sentence production. We measured people's pupillary responses as they produced spoken descriptions of depicted events. We manipulated the syntactic structure of the target by training subjects to use different types of sentences following a colour cue. The results showed higher increase in pupil size for the production of passive and object dislocated sentences than for active canonical subject-verb-object sentences, indicating that more cognitive effort is associated with more complex noncanonical thematic order. We also manipulated the time at which the cue that triggered structure-building processes was presented. Differential increase in pupil diameter for more complex sentences was shown to rise earlier as the colour cue was presented earlier, suggesting that the observed pupillary changes are due to differential demands in relatively independent structure-building processes during grammatical planning. Task-evoked pupillary responses provide a reliable measure to study the cognitive processes involved in sentence production.

Procedure for calculating estimated ultimate recoveries of Bakken and Three Forks Formations horizontal wells in the Williston Basin

USGS Publications Warehouse

Cook, Troy A.

2013-01-01

Estimated ultimate recoveries (EURs) are a key component in determining productivity of wells in continuous-type oil and gas reservoirs. EURs form the foundation of a well-performance-based assessment methodology initially developed by the U.S. Geological Survey (USGS; Schmoker, 1999). This methodology was formally reviewed by the American Association of Petroleum Geologists Committee on Resource Evaluation (Curtis and others, 2001). The EUR estimation methodology described in this paper was used in the 2013 USGS assessment of continuous oil resources in the Bakken and Three Forks Formations and incorporates uncertainties that would not normally be included in a basic decline-curve calculation. These uncertainties relate to (1) the mean time before failure of the entire well-production system (excluding economics), (2) the uncertainty of when (and if) a stable hyperbolic-decline profile is revealed in the production data, (3) the particular formation involved, (4) relations between initial production rates and a stable hyperbolic-decline profile, and (5) the final behavior of the decline extrapolation as production becomes more dependent on matrix storage.

Age- and diabetes-related nonenzymatic crosslinks in collagen fibrils: candidate amino acids involved in Advanced Glycation End-products.

PubMed

Gautieri, Alfonso; Redaelli, Alberto; Buehler, Markus J; Vesentini, Simone

2014-02-01

Ageing and diabetes share a common deleterious phenomenon, the formation of Advanced Glycation Endproducts (AGEs), which accumulate predominantly in collagen due to its low turnover. Though the general picture of glycation has been identified, the detailed knowledge of which collagen amino acids are involved in AGEs is still missing. In this work we use an atomistic model of a collagen fibril to pinpoint, for the first time, the precise location of amino acids involved in the most relevant AGE, glucosepane. The results show that there are 14 specific lysine-arginine pairs that, due to their relative position and configuration, are likely to form glucosepane. We find that several residues involved in AGE crosslinks are within key collagen domains, such as binding sites for integrins, proteoglycans and collagenase, hence providing molecular-level explanations of previous experimental results showing decreased collagen affinity for key molecules. Altogether, these findings reveal the molecular mechanism by which glycation affects the biological properties of collagen tissues, which in turn contribute to age- and diabetes-related pathological states. © 2013.

ASPEN Version 3.0

NASA Technical Reports Server (NTRS)

Rabideau, Gregg; Chien, Steve; Knight, Russell; Schaffer, Steven; Tran, Daniel; Cichy, Benjamin; Sherwood, Robert

2006-01-01

The Automated Scheduling and Planning Environment (ASPEN) computer program has been updated to version 3.0. ASPEN is a modular, reconfigurable, application software framework for solving batch problems that involve reasoning about time, activities, states, and resources. Applications of ASPEN can include planning spacecraft missions, scheduling of personnel, and managing supply chains, inventories, and production lines. ASPEN 3.0 can be customized for a wide range of applications and for a variety of computing environments that include various central processing units and random access memories.

TACITUS: Text Understanding for Strategic Computing

DTIC Science & Technology

1990-11-01

using TACITUS for the OPREPs was like driving a Porsche in America. Moreover, an enormous amount of time had to be spent in taking care of very minor...characters to which [a] can correspond that does not include [b]. A comparison of each system’s third type of rule involves compostion of rules and is the...production. For a significant number of examples (34), it did not matter where the attachment was made. For instance, in John made coffee for Mary

Development of web tools to disseminate space geodesy data-related products

NASA Astrophysics Data System (ADS)

Soudarin, L.; Ferrage, P.; Mezerette, A.

2014-12-01

In order to promote the products of the DORIS system, the French Space Agency CNES has developed and implemented on the web site of the International DORIS Service (IDS) a set of plot tools to interactively build and display time series of site positions, orbit residuals and terrestrial parameters (scale, geocenter). An interactive global map is also available to select sites, and to get access to their information. Besides the products provided by the CNES Orbitography Team and the IDS components, these tools allow comparing time evolutions of coordinates for collocated DORIS and GNSS stations, thanks to the collaboration with the Terrestrial Frame Combination Center of the International GNSS Service (IGS). The next step currently in progress is the creation of a database to improve robustness and efficiency of the tools, with the objective to propose a complete web service to foster data exchange with the other geodetic services of the International Association of Geodesy (IAG). The possibility to visualize and compare position time series of the four main space geodetic techniques DORIS, GNSS, SLR and VLBI is already under way at the French level. A dedicated version of these web tools has been developed for the French Space Geodesy Research Group (GRGS). It will give access to position time series provided by the GRGS Analysis Centers involved in DORIS, GNSS, SLR and VLBI data processing for the realization of the International Terrestrial Reference Frame. In this presentation, we will describe the functionalities of these tools, and we will address some aspects of the time series (content, format).

Spectral-element simulations of carbon dioxide (CO2) sequestration time-lapse monitoring

NASA Astrophysics Data System (ADS)

Morency, C.; Luo, Y.; Tromp, J.

2009-12-01

Geologic sequestration of CO2, a green house gas, represents an effort to reduce the large amount of CO2 generated as a by-product of fossil fuels combustion and emitted into the atmosphere. This process of sequestration involves CO2 storage deep underground. There are three main storage options: injection into hydrocarbon reservoirs, injection into methane-bearing coal beds, or injection into deep saline aquifers, that is, highly permeable porous media. The key issues involve accurate monitoring of the CO2, from the injection stage to the prediction & verification of CO2 movement over time for environmental considerations. A natural non-intrusive monitoring technique is referred to as ``4D seismics'', which involves 3D time-lapse seismic surveys. The success of monitoring the CO2 movement is subject to a proper description of the physics of the problem. We propose to realize time-lapse migrations comparing acoustic, elastic, and poroelastic simulations of 4D seismic imaging to characterize the storage zone. This approach highlights the influence of using different physical theories on interpreting seismic data, and, more importantly, on extracting the CO2 signature from the seismic wave field. Our simulations are performed using a spectral-element method, which allows for highly accurate results. Biot's equations are implemented to account for poroelastic effects. Attenuation associated with the anelasticity of the rock frame and frequency-dependent viscous resistance of the pore fluid are accommodated based upon a memory variable approach. The sensitivity of observables to the model parameters is quantified based upon finite-frequency sensitivity kernels calculated using an adjoint method.

Did Jews avoid using products made of pigs as medical materials? "And the swine ... it is unclean unto you" (Deut. 14 : 8).

PubMed

Shemesh, Abraham Ofir

2014-01-01

Medical and halakhic literature in medieval and modern times teach us that healing by porcine produce was used quite extensively. Medical materials made of pig were mentioned in Jewish manuscripts in Christian and Islamic territories. We assume that, in fact, they were in wider usage in Europe, where the pig was common. Much of the permitted uses seem to involve external application and there was little ingestion orally unless there were compelling reasons. The Jewish medical literature mentions many treatments using pig products, such as: the fat for skin diseases, diaphoresis; bile for gynecologic problems; dung to stop bleeding in circumcision and drinking urine for kidney stones.

Removal of copper ions from aqueous solutions by a steel-making by-product.

PubMed

López, F A; Martín, M I; Pérez, C; López-Delgado, A; Alguacil, F J

2003-09-01

A study is made of the use of a steel-making by-product (rolling mill scale) as a material for removing Cu(2+) ions from aqueous solutions. The influence of contact time, initial copper ion concentration and temperature on removal capability is considered. The removal of Cu(2+) ions from an aqueous solution involves two processes: on the one hand, the adsorption of Cu(2+) ions on the surface of mill scale due to the iron oxides present in the latter; and on the other hand, the cementation of Cu(2+) onto metallic iron contained in the mill scale. Rolling mill scale is seen to be an effective material for the removal of copper ions from aqueous solutions.

Synthetic microbial ecosystems for biotechnology.

PubMed

Pandhal, Jagroop; Noirel, Josselin

2014-06-01

Most highly controlled and specific applications of microorganisms in biotechnology involve pure cultures. Maintaining single strain cultures is important for industry as contaminants can reduce productivity and lead to longer "down-times" during sterilisation. However, microbes working together provide distinct advantages over pure cultures. They can undertake more metabolically complex tasks, improve efficiency and even expand applications to open systems. By combining rapidly advancing technologies with ecological theory, the use of microbial ecosystems in biotechnology will inevitably increase. This review provides insight into the use of synthetic microbial communities in biotechnology by applying the engineering paradigm of measure, model, manipulate and manufacture, and illustrate the emerging wider potential of the synthetic ecology field. Systems to improve biofuel production using microalgae are also discussed.

Preparation and storage of isotopically labeled reduced nicotinamide adenine dinucleotide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Northrop, D.B.; Duggleby, R.G.

1987-09-01

A method for obtaining highly purified NADH in a dry, solid, and stable form is described. The method involves improvements of the ion-exchange and reversed-phase chromatographic procedures of C. J. Newton and S. M. Faynor, and D. B. Northrop. The necessary time to prepare pure NADH has been reduced to a few hours. The final product, obtained by drying the nucleotide from absolute ethanol, shows no detectable decomposition either during the drying procedure or during storage under nitrogen gas at -20 degrees C for several months. Using dry product prepared from fixed volumes of ethanolic solution, standardized solutions of knownmore » amounts of the highly purified and stored NADH can be obtained in a few seconds.« less

Citizens’ juries in planning research priorities: process, engagement and outcome

PubMed Central

Gooberman‐Hill, Rachael; Horwood, Jeremy; Calnan, Michael

2008-01-01

Abstract Background  Involving members of the public in setting priorities for health research in becoming increasingly common practice. One method used in public involvement exercises is the citizens' jury. Objective  This article examines some challenges and benefits of citizens' juries, including issues relating to process, public engagement and outcome. Design  In Bristol, UK, a citizens' jury was held with the aim of identifying local priorities for research into health and social care. This jury is used as an example through which key issues in public involvement and jury processes are explored. Setting and Participants  The Bristol Citizens' Jury comprised 20 members of the public (`jurors'), an oversight panel and a steering group. The jurors met at 11 consecutive sessions during 2006 over a period of 16 weeks, which culminated in a written report. All the sessions were audio‐recorded, five sessions were observed and video‐recorded, and 16 jurors completed written feedback forms at the end of the jury process. Findings and conclusion  In this article we discuss degree and timing of public involvement in the process of health research; the role of context; representation of communities; processes of deliberation and knowledge production; and how constraints of time and cost may affect public involvement. It was clear that jurors who took part in the Bristol Citizens' Jury were engaged and committed. This engagement may be related to jurors' belief in their ability to shape future research alongside concern about the relevance of the issues under discussion. Opposing emotions of tension and harmony are a crucial part of the deliberation process. PMID:18816323

Direct bioethanol production by amylolytic yeast Candida albicans.

PubMed

Aruna, A; Nagavalli, M; Girijashankar, V; Ponamgi, S P D; Swathisree, V; Rao, L Venkateswar

2015-03-01

An attempt was made to produce bioethanol using optimized fermentation parameters and mutationally improved strain of Candida albicans. The mutant strain OMC3E6 obtained by UV irradiation followed by ethidium bromide successive mutations showed 2.6 times more glucoamylase secretion and 1.5 times more bioethanol production via direct conversion of starch. Enhanced hydrolysis of insoluble starch (72%) and potato starch (70%) was achieved with glucoamylase enzyme preparation from mutant C. albicans. In fermentation medium, the use of maltose, corn steep liquor, NaH2 PO4 , NaCl + MgSO4 and Triton X-100 has increased the glucoamylase production by the microbe. Under optimized conditions, C. albicans eventually produced 437 g ethanol kg(-1) potatoes. Earlier reports mentioned the use of thrice the quantity of starch as reported by us followed by more fermentation period (3-4 days) and demanded pretreatment of starch sources with alpha-amylase as well. Here, we simplified these three steps and obtained 73% conversion of insoluble starch into ethanol via direct conversion method in a period of 2 days without the involvement of cell immobilizations or enzyme pretreatment steps. Due to fast depletion of fossil fuels in the modern world, bioethanol usage as an alternate energy source is the need of the hour. For the first time, we report bioethanol production by Candida albicans via direct conversion of starchy biomass into ethanol along with enhanced starch-hydrolysing capacity and ethanol conversion ratio. So far, C. albicans was dealt in the field of clinical pathology, but here we successfully employed this organism to produce bioethanol from starchy agri-substrates. Optimizing fermentation parameters and improving the microbial strains through successive mutagenesis can improve the end product yield. © 2014 The Society for Applied Microbiology.

Fentanyl Law Enforcement Submissions and Increases in Synthetic Opioid-Involved Overdose Deaths - 27 States, 2013-2014.

PubMed

Gladden, R Matthew; Martinez, Pedro; Seth, Puja

2016-08-26

In March and October 2015, the Drug Enforcement Administration (DEA) and CDC, respectively, issued nationwide alerts identifying illicitly manufactured fentanyl (IMF) as a threat to public health and safety (1,2). IMF is unlawfully produced fentanyl, obtained through illicit drug markets, includes fentanyl analogs, and is commonly mixed with or sold as heroin (1,3,4). Starting in 2013, the production and distribution of IMF increased to unprecedented levels, fueled by increases in the global supply, processing, and distribution of fentanyl and fentanyl-precursor chemicals by criminal organizations (3). Fentanyl is a synthetic opioid 50-100 times more potent than morphine (2).* Multiple states have reported increases in fentanyl-involved overdose (poisoning) deaths (fentanyl deaths) (2). This report examined the number of drug products obtained by law enforcement that tested positive for fentanyl (fentanyl submissions) and synthetic opioid-involved deaths other than methadone (synthetic opioid deaths), which include fentanyl deaths and deaths involving other synthetic opioids (e.g., tramadol). Fentanyl deaths are not reported separately in national data. Analyses also were conducted on data from 27 states(†) with consistent death certificate reporting of the drugs involved in overdoses. Nationally, the number of fentanyl submissions and synthetic opioid deaths increased by 426% and 79%, respectively, during 2013-2014; among the 27 analyzed states, fentanyl submission increases were strongly correlated with increases in synthetic opioid deaths. Changes in fentanyl submissions and synthetic opioid deaths were not correlated with changes in fentanyl prescribing rates, and increases in fentanyl submissions and synthetic opioid deaths were primarily concentrated in eight states (high-burden states). Reports from six of the eight high-burden states indicated that fentanyl-involved overdose deaths were primarily driving increases in synthetic opioid deaths. Increases in synthetic opioid deaths among high-burden states disproportionately involved persons aged 15-44 years and males, a pattern consistent with previously documented IMF-involved deaths (5). These findings, combined with the approximate doubling in fentanyl submissions during 2014-2015 (from 5,343 to 13,882) (6), underscore the urgent need for a collaborative public health and law enforcement response.

Effect of herd cues and product involvement on bidder online choices.

PubMed

Chen, Yi-Fen; Wang, Ya-Ju

2010-08-01

Previous works have shown that consumers are influenced by others in decision making. Herd behavior is common in situations in which consumers infer product quality from other consumer choices and incorporate that information into their own decision making. This research presents two studies examining herd effect and the moderating role of product involvement on bidder choices in online auctions. The two studies addressed the influence on bidder online choices of herd cues frequently found in online auctions, including feedback ratings and number of questions and answers. The experimental results demonstrated that bidders use online herd cues when making decisions in online auctions. Additionally, the effects of herd cues on bidder online choices were stronger in high-involvement than low-involvement participants. Results and implications are discussed.

The Decadal Climate Prediction Project (DCPP) contribution to CMIP6

DOE PAGES

Boer, George J.; Smith, Douglas M.; Cassou, Christophe; ...

2016-01-01

The Decadal Climate Prediction Project (DCPP) is a coordinated multi-model investigation into decadal climate prediction, predictability, and variability. The DCPP makes use of past experience in simulating and predicting decadal variability and forced climate change gained from the fifth Coupled Model Intercomparison Project (CMIP5) and elsewhere. It builds on recent improvements in models, in the reanalysis of climate data, in methods of initialization and ensemble generation, and in data treatment and analysis to propose an extended comprehensive decadal prediction investigation as a contribution to CMIP6 (Eyring et al., 2016) and to the WCRP Grand Challenge on Near Term Climate Predictionmore » (Kushnir et al., 2016). The DCPP consists of three components. Component A comprises the production and analysis of an extensive archive of retrospective forecasts to be used to assess and understand historical decadal prediction skill, as a basis for improvements in all aspects of end-to-end decadal prediction, and as a basis for forecasting on annual to decadal timescales. Component B undertakes ongoing production, analysis and dissemination of experimental quasi-real-time multi-model forecasts as a basis for potential operational forecast production. Component C involves the organization and coordination of case studies of particular climate shifts and variations, both natural and naturally forced (e.g. the “hiatus”, volcanoes), including the study of the mechanisms that determine these behaviours. Furthermore, groups are invited to participate in as many or as few of the components of the DCPP, each of which are separately prioritized, as are of interest to them.The Decadal Climate Prediction Project addresses a range of scientific issues involving the ability of the climate system to be predicted on annual to decadal timescales, the skill that is currently and potentially available, the mechanisms involved in long timescale variability, and the production of forecasts of benefit to both science and society.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boer, George J.; Smith, Douglas M.; Cassou, Christophe

The Decadal Climate Prediction Project (DCPP) is a coordinated multi-model investigation into decadal climate prediction, predictability, and variability. The DCPP makes use of past experience in simulating and predicting decadal variability and forced climate change gained from the fifth Coupled Model Intercomparison Project (CMIP5) and elsewhere. It builds on recent improvements in models, in the reanalysis of climate data, in methods of initialization and ensemble generation, and in data treatment and analysis to propose an extended comprehensive decadal prediction investigation as a contribution to CMIP6 (Eyring et al., 2016) and to the WCRP Grand Challenge on Near Term Climate Predictionmore » (Kushnir et al., 2016). The DCPP consists of three components. Component A comprises the production and analysis of an extensive archive of retrospective forecasts to be used to assess and understand historical decadal prediction skill, as a basis for improvements in all aspects of end-to-end decadal prediction, and as a basis for forecasting on annual to decadal timescales. Component B undertakes ongoing production, analysis and dissemination of experimental quasi-real-time multi-model forecasts as a basis for potential operational forecast production. Component C involves the organization and coordination of case studies of particular climate shifts and variations, both natural and naturally forced (e.g. the “hiatus”, volcanoes), including the study of the mechanisms that determine these behaviours. Furthermore, groups are invited to participate in as many or as few of the components of the DCPP, each of which are separately prioritized, as are of interest to them.The Decadal Climate Prediction Project addresses a range of scientific issues involving the ability of the climate system to be predicted on annual to decadal timescales, the skill that is currently and potentially available, the mechanisms involved in long timescale variability, and the production of forecasts of benefit to both science and society.« less

Multi-timescale analysis of a metabolic network in synthetic biology: a kinetic model for 3-hydroxypropionic acid production via beta-alanine.

PubMed

Dalwadi, Mohit P; King, John R; Minton, Nigel P

2018-07-01

A biosustainable production route for 3-hydroxypropionic acid (3HP), an important platform chemical, would allow 3HP to be produced without using fossil fuels. We are interested in investigating a potential biochemical route to 3HP from pyruvate through [Formula: see text]-alanine and, in this paper, we develop and solve a mathematical model for the reaction kinetics of the metabolites involved in this pathway. We consider two limiting cases, one where the levels of pyruvate are never replenished, the other where the levels of pyruvate are continuously replenished and thus kept constant. We exploit the natural separation of both the time scales and the metabolite concentrations to make significant asymptotic progress in understanding the system without resorting to computationally expensive parameter sweeps. Using our asymptotic results, we are able to predict the most important reactions to maximize the production of 3HP in this system while reducing the maximum amount of the toxic intermediate compound malonic semi-aldehyde present at any one time, and thus we are able to recommend which enzymes experimentalists should focus on manipulating.

Analysis on flexible manufacturing system layout using arena simulation software

NASA Astrophysics Data System (ADS)

Fadzly, M. K.; Saad, Mohd Sazli; Shayfull, Z.

2017-09-01

Flexible manufacturing system (FMS) was defined as highly automated group technology machine cell, consisting of a group of processing stations interconnected by an automated material handling and storage system, and controlled by an integrated computer system. FMS can produce parts or products are in the mid-volume, mid-variety production range. The layout system in FMS is an important criterion to design the FMS system to produce a part or product. This facility layout of an FMS involves the positioning of cells within given boundaries, so as to minimize the total projected travel time between cells. Defining the layout includes specifying the spatial coordinates of each cell, its orientation in either a horizontal or vertical position, and the location of its load or unloads point. There are many types of FMS layout such as In-line, loop ladder and robot centered cell layout. The research is concentrating on the design and optimization FMS layout. The final conclusion can be summarized that the objective to design and optimisation of FMS layout for this study is successful because the FMS In-line layout is the best layout based on effective time and cost using ARENA simulation software.

Sustained attention in language production: an individual differences investigation.

PubMed

Jongman, Suzanne R; Roelofs, Ardi; Meyer, Antje S

2015-01-01

Whereas it has long been assumed that most linguistic processes underlying language production happen automatically, accumulating evidence suggests that these processes do require some form of attention. Here we investigated the contribution of sustained attention: the ability to maintain alertness over time. In Experiment 1, participants' sustained attention ability was measured using auditory and visual continuous performance tasks. Subsequently, employing a dual-task procedure, participants described pictures using simple noun phrases and performed an arrow-discrimination task while their vocal and manual response times (RTs) and the durations of their gazes to the pictures were measured. Earlier research has demonstrated that gaze duration reflects language planning processes up to and including phonological encoding. The speakers' sustained attention ability correlated with the magnitude of the tail of the vocal RT distribution, reflecting the proportion of very slow responses, but not with individual differences in gaze duration. This suggests that sustained attention was most important after phonological encoding. Experiment 2 showed that the involvement of sustained attention was significantly stronger in a dual-task situation (picture naming and arrow discrimination) than in simple naming. Thus, individual differences in maintaining attention on the production processes become especially apparent when a simultaneous second task also requires attentional resources.

Corporate Involvement in C AI

ERIC Educational Resources Information Center

Baker, Justine C.

1978-01-01

Historic perspective of computer manufacturers and their contribution to CAI. Corporate CAI products and services are mentioned, as is a forecast for educational involvement by computer corporations. A chart of major computer corporations shows gross sales, net earnings, products and services offered, and other corporate information. (RAO)

Development of polymer nano composite patterns using fused deposition modeling for rapid investment casting process

NASA Astrophysics Data System (ADS)

Vivek, Tiwary; Arunkumar, P.; Deshpande, A. S.; Vinayak, Malik; Kulkarni, R. M.; Asif, Angadi

2018-04-01

Conventional investment casting is one of the oldest and most economical manufacturing techniques to produce intricate and complex part geometries. However, investment casting is considered economical only if the volume of production is large. Design iterations and design optimisations in this technique proves to be very costly due to time and tooling cost for making dies for producing wax patterns. However, with the advent of Additive manufacturing technology, plastic patterns promise a very good potential to replace the wax patterns. This approach can be very useful for low volume production & lab requirements, since the cost and time required to incorporate the changes in the design is very low. This research paper discusses the steps involved for developing polymer nanocomposite filaments and checking its suitability for investment castings. The process parameters of the 3D printer machine are also optimized using the DOE technique to obtain mechanically stronger plastic patterns. The study is done to develop a framework for rapid investment casting for lab as well as industrial requirements.