ESA Science Archives, VO tools and remote Scientific Data reduction in Grid Architectures

NASA Astrophysics Data System (ADS)

Arviset, C.; Barbarisi, I.; de La Calle, I.; Fajersztejn, N.; Freschi, M.; Gabriel, C.; Gomez, P.; Guainazzi, M.; Ibarra, A.; Laruelo, A.; Leon, I.; Micol, A.; Parrilla, E.; Ortiz, I.; Osuna, P.; Salgado, J.; Stebe, A.; Tapiador, D.

2008-08-01

This paper presents the latest functionalities of the ESA Science Archives located at ESAC, Spain, in particular, the following archives : the ISO Data Archive (IDA {http://iso.esac.esa.int/ida}), the XMM-Newton Science Archive (XSA {http://xmm.esac.esa.int/xsa}), the Integral SOC Science Data Archive (ISDA {http://integral.esac.esa.int/isda}) and the Planetary Science Archive (PSA {http://www.rssd.esa.int/psa}), both the classical and the map-based Mars Express interfaces. Furthermore, the ESA VOSpec {http://esavo.esac.esa.int/vospecapp} spectra analysis tool is described, which allows to access and display spectral information from VO resources (both real observational and theoretical spectra), including access to Lines database and recent analysis functionalities. In addition, we detail the first implementation of RISA (Remote Interface for Science Analysis), a web service providing remote users the ability to create fully configurable XMM-Newton data analysis workflows, and to deploy and run them on the ESAC Grid. RISA makes fully use of the inter-operability provided by the SIAP (Simple Image Access Protocol) services as data input, and at the same time its VO-compatible output can directly be used by general VO-tools.

Business Model for the Security of a Large-Scale PACS, Compliance with ISO/27002:2013 Standard.

PubMed

Gutiérrez-Martínez, Josefina; Núñez-Gaona, Marco Antonio; Aguirre-Meneses, Heriberto

2015-08-01

Data security is a critical issue in an organization; a proper information security management (ISM) is an ongoing process that seeks to build and maintain programs, policies, and controls for protecting information. A hospital is one of the most complex organizations, where patient information has not only legal and economic implications but, more importantly, an impact on the patient's health. Imaging studies include medical images, patient identification data, and proprietary information of the study; these data are contained in the storage device of a PACS. This system must preserve the confidentiality, integrity, and availability of patient information. There are techniques such as firewalls, encryption, and data encapsulation that contribute to the protection of information. In addition, the Digital Imaging and Communications in Medicine (DICOM) standard and the requirements of the Health Insurance Portability and Accountability Act (HIPAA) regulations are also used to protect the patient clinical data. However, these techniques are not systematically applied to the picture and archiving and communication system (PACS) in most cases and are not sufficient to ensure the integrity of the images and associated data during transmission. The ISO/IEC 27001:2013 standard has been developed to improve the ISM. Currently, health institutions lack effective ISM processes that enable reliable interorganizational activities. In this paper, we present a business model that accomplishes the controls of ISO/IEC 27002:2013 standard and criteria of security and privacy from DICOM and HIPAA to improve the ISM of a large-scale PACS. The methodology associated with the model can monitor the flow of data in a PACS, facilitating the detection of unauthorized access to images and other abnormal activities.

Progress in revising and supplementing fundamental optical ISO standards

NASA Astrophysics Data System (ADS)

Schuhmann, Rainer

2017-11-01

This overview reflects the ISO working group activities of ISO/TC 172 Subcommittee 1 during the last years which have resulted in revisions and new ISO standards for optical components. For ISO 10110, ISO 14999 and other standards new surface forms and metrology techniques have been considered, standards about material characteristics have been consolidated, and optical drawings have been updated. Selected examples of new improvements and future work items are given.

Conformance testing strategies for DICOM protocols in a heterogenous communications system

NASA Astrophysics Data System (ADS)

Meyer, Ralph; Hewett, Andrew J.; Cordonnier, Emmanuel; Piqueras, Joachim; Jensch, Peter F.

1995-05-01

The goal of the DICOM standard is to define a standard network interface and data model for imaging devices from various vendors. It shall facilitate the development and integration of information systems and picture archiving and communication systems (PACS) in a networked environment. Current activities in Oldenburg, Germany include projects to establish cooperative work applications for radiological purposes, comprising (joined) text, data, signal and image communications, based on narrowband ISDN and ATM communication for regional and Pan European applications. In such a growing and constantly changing environment it is vital to have a solid and implementable plan to bring standards in operation. A communication standard alone cannot ensure interoperability between different vendor implementations. Even DICOM does not specify implementation-specific requirements nor does it specify a testing procedure to assess an implementation's conformance to the standard. The conformance statements defined in the DICOM standard only allow a user to determine which optional components are supported by the implementation. The goal of our work is to build a conformance test suite for DICOM. Conformance testing can aid to simplify and solve problems with multivendor systems. It will check a vendor's implementation against the DICOM standard and state the found subset of functionality. The test suite will be built in respect to the ISO 9646 Standard (OSI-Conformance Testing Methodology and Framework) which is a standard devoted to the subject of conformance testing implementations of Open Systems Interconnection (OSI) standards. For our heterogeneous communication environments we must also consider ISO 9000 - 9004 (quality management and quality assurance) to give the users the confidence in evolving applications.

Twenty new ISO standards on dosimetry for radiation processing

NASA Astrophysics Data System (ADS)

Farrar, H., IV

2000-03-01

Twenty standards on essentially all aspects of dosimetry for radiation processing were published as new ISO standards in December 1998. The standards are based on 20 standard practices and guides developed over the past 14 years by Subcommittee E10.01 of the American Society for Testing and Materials (ASTM). The transformation to ISO standards using the 'fast track' process under ISO Technical Committee 85 (ISO/TC85) commenced in 1995 and resulted in some overlap of technical information between three of the new standards and the existing ISO Standard 11137 Sterilization of health care products — Requirements for validation and routine control — Radiation sterilization. Although the technical information in these four standards was consistent, compromise wording in the scopes of the three new ISO standards to establish precedence for use were adopted. Two of the new ISO standards are specifically for food irradiation applications, but the majority apply to all forms of gamma, X-ray, and electron beam radiation processing, including dosimetry for sterilization of health care products and the radiation processing of fruit, vegetables, meats, spices, processed foods, plastics, inks, medical wastes, and paper. Most of the standards provide exact procedures for using individual dosimetry systems or for characterizing various types of irradiation facilities, but one covers the selection and calibration of dosimetry systems, and another covers the treatment of uncertainties using the new ISO Type A and Type B evaluations. Unfortunately, nine of the 20 standards just adopted by the ISO are not the most recent versions of these standards and are therefore already out of date. To help solve this problem, efforts are being made to develop procedures to coordinate the ASTM and ISO development and revision processes for these and future ASTM-originating dosimetry standards. In the meantime, an additional four dosimetry standards have recently been published by the ASTM but have not yet been submitted to the ISO, and six more dosimetry standards are under development.

Golden legacy from ESA's observatory

NASA Astrophysics Data System (ADS)

2003-07-01

ISO was the first space observatory able to see the sky in infrared light. Using its eyes, we have discovered many new phenomena that have radically changed our view of the Universe. Everybody knows that when something is heated it glows. However, things also glow with a light our eyes cannot detect at room temperature: infrared light. Infrared telescopes do not work well on the Earth’s surface because such light is absorbed by the atmosphere. ISO looked at the cold parts of the universe, usually the 'cold and dusty' parts. It peered into clouds of dust and gas where stars were being born, observing for the first time the earliest stages of star formation. It discovered, for example, that stars begin to form at temperatures as low as -250°C or less. Scientists were able to follow the evolution of dust from where it is produced (that is, old stars - the massive 'dust factories') to the regions where it forms new planetary systems. ISO found that most young stars are surrounded by discs of dust that could harbour planets. The observatory also analysed the chemical composition of cosmic dust, thereby opening up a new field of research, ‘astromineralogy’. With ISO we have been able to discover the presence of water in many different regions in space. Another new discipline, 'astrochemistry', was boosted when ISO discovered that the water molecule is common in the Universe, even in distant galaxies, and complex organic molecules like benzene readily form in the surroundings of some stars. "ISO results are impacting most fields of astronomical research, almost literally from comets to cosmology," explains Alberto Salama, ISO Project Scientist. "Some results answer questions. Others open new fields. Some are already being followed up by existing telescopes; others have to await future facilities." When ISO's operational life ended, in 1998, its observations became freely available to the world scientific community via ISO’s data archive. In May 2003 the 'milestone number' of 1000 scientific papers was reached. Even now ISO's data archive remains a valuable source of new results. For example, some of the latest papers describe the detection of water in 'protostars', which are stars in the process of being born, and studies of numerous nearby galaxies. "Of course we were confident ISO was going to do very well, but its actual productivity has been far beyond our expectations. The publication rate does not even seem to have peaked yet! We expect many more results," Salama says. Note for editors ISO's data archive contains scientific data from about 30 000 observations. Astronomers from all over the world have downloaded almost eight times the equivalent of the entire scientific archive. As much as 35% of all ISO observations have already been published at least once in prestigious scientific journals. ESA is now preparing to continue its infrared investigation of the Universe. The next generation of infrared space observatories is already in the pipeline. ISO is to be followed by the NASA SIRTF observatory to be launched later this year. Then, in 2007, ESA will follow up the pioneering work of ISO with the Herschel Space Observatory, which will become the largest imaging telescope ever put into space. ISO The Infrared Space Observatory (ISO) was launched in 1995 and operated from November that year to May 1998, when it ran out of the coolant needed to keep its detectors working. At the time it was the most sensitive infrared satellite ever launched and made particularly important studies of the dusty regions of the Universe, where visible light telescopes can see nothing. ESA will reopen its examination of the infrared Universe when Herschel is launched in 2007. Herschel Herschel will be the largest space telescope when, in 2007, it is launched on an Ariane-5 rocket, together with ESA’s cosmology mission, Planck. Herschel’s 3.5-metre diameter mirror will collect longwave infrared radiation from some of the coolest and most distant objects in the Universe. These include forming stars and galaxies.

A Generic Metadata Editor Supporting System Using Drupal CMS

NASA Astrophysics Data System (ADS)

Pan, J.; Banks, N. G.; Leggott, M.

2011-12-01

Metadata handling is a key factor in preserving and reusing scientific data. In recent years, standardized structural metadata has become widely used in Geoscience communities. However, there exist many different standards in Geosciences, such as the current version of the Federal Geographic Data Committee's Content Standard for Digital Geospatial Metadata (FGDC CSDGM), the Ecological Markup Language (EML), the Geography Markup Language (GML), and the emerging ISO 19115 and related standards. In addition, there are many different subsets within the Geoscience subdomain such as the Biological Profile of the FGDC (CSDGM), or for geopolitical regions, such as the European Profile or the North American Profile in the ISO standards. It is therefore desirable to have a software foundation to support metadata creation and editing for multiple standards and profiles, without re-inventing the wheels. We have developed a software module as a generic, flexible software system to do just that: to facilitate the support for multiple metadata standards and profiles. The software consists of a set of modules for the Drupal Content Management System (CMS), with minimal inter-dependencies to other Drupal modules. There are two steps in using the system's metadata functions. First, an administrator can use the system to design a user form, based on an XML schema and its instances. The form definition is named and stored in the Drupal database as a XML blob content. Second, users in an editor role can then use the persisted XML definition to render an actual metadata entry form, for creating or editing a metadata record. Behind the scenes, the form definition XML is transformed into a PHP array, which is then rendered via Drupal Form API. When the form is submitted the posted values are used to modify a metadata record. Drupal hooks can be used to perform custom processing on metadata record before and after submission. It is trivial to store the metadata record as an actual XML file or in a storage/archive system. We are working on adding many features to help editor users, such as auto completion, pre-populating of forms, partial saving, as well as automatic schema validation. In this presentation we will demonstrate a few sample editors, including an FGDC editor and a bare bone editor for ISO 19115/19139. We will also demonstrate the use of templates during the definition phase, with the support of export and import functions. Form pre-population and input validation will also be covered. Theses modules are available as open-source software from the Islandora software foundation, as a component of a larger Drupal-based data archive system. They can be easily installed as stand-alone system, or to be plugged into other existing metadata platforms.

System and Method for Providing a Climate Data Persistence Service

NASA Technical Reports Server (NTRS)

Schnase, John L. (Inventor); Ripley, III, William David (Inventor); Duffy, Daniel Q. (Inventor); Thompson, John H. (Inventor); Strong, Savannah L. (Inventor); McInerney, Mark (Inventor); Sinno, Scott (Inventor); Tamkin, Glenn S. (Inventor); Nadeau, Denis (Inventor)

2018-01-01

A system, method and computer-readable storage devices for providing a climate data persistence service. A system configured to provide the service can include a climate data server that performs data and metadata storage and management functions for climate data objects, a compute-storage platform that provides the resources needed to support a climate data server, provisioning software that allows climate data server instances to be deployed as virtual climate data servers in a cloud computing environment, and a service interface, wherein persistence service capabilities are invoked by software applications running on a client device. The climate data objects can be in various formats, such as International Organization for Standards (ISO) Open Archival Information System (OAIS) Reference Model Submission Information Packages, Archive Information Packages, and Dissemination Information Packages. The climate data server can enable scalable, federated storage, management, discovery, and access, and can be tailored for particular use cases.

Enhancing Technology Education Students' Understanding of ISO 9000.

ERIC Educational Resources Information Center

Harding, Kerry A.; Tesolowski, Dennis G.; Simmons, J. Bryan

2000-01-01

Defines ISO 9000, the quality control standard of the International Organization for Standardization (ISO), and looks at the benefits of ISO certification. Looks at the four levels of ISO 9000 and discusses the construction of training courses to prepare ISO documentation. (JOW)

An ISO far-infrared survey of line and continuum emission for 227 galaxies

NASA Technical Reports Server (NTRS)

Brauher, J. R.

2002-01-01

Far-infrared line and continuum fluxes are presented for a sample of 227 galaxies observed with the Long Wavelength Spectrometer on the Infrared Space Observatory, selected from the ISO Data Archive and having an IRAS 60/100 mu m color ration of 0.2-1.4 and IRAS 60 mu m flux density between 0.1 Jy and 1300 Jy.

Specification and tolerancing of bulk glass material imperfections with ISO standards

NASA Astrophysics Data System (ADS)

Krisiloff, Allen J.

2017-08-01

Standards for the specification of tolerances for glass material imperfections have been evolving over the past 40 years. Today, several individual ISO Standards for drawings and drawing notation - ISO 10110-2, ISO-10110-3, and ISO- 10110-4, which were last revised in 1996 and 1997 - are being merged and re-written to incorporate technical improvements and enhance the clarity of presentation. The new standard, tentatively numbered ISO 10110-18, is on schedule for release in 2018. It will also provide notation to directly utilize concepts and quality classes defined in ISO 12123, the newly revised standard for raw glass material. New ways to specify striae and a way to specify raw material specifications on a finished part drawing are two additional highlights of the revised versions of this set of ISO standards. This paper will discuss the old shortcomings, their corrections, and the new features incorporated into the set of standards currently under final development and whose publication is expected next year.

ISO 19115 Experiences in NASA's Earth Observing System (EOS) ClearingHOuse (ECHO)

NASA Astrophysics Data System (ADS)

Cechini, M. F.; Mitchell, A.

2011-12-01

Metadata is an important entity in the process of cataloging, discovering, and describing earth science data. As science research and the gathered data increases in complexity, so does the complexity and importance of descriptive metadata. To meet these growing needs, the metadata models required utilize richer and more mature metadata attributes. Categorizing, standardizing, and promulgating these metadata models to a politically, geographically, and scientifically diverse community is a difficult process. An integral component of metadata management within NASA's Earth Observing System Data and Information System (EOSDIS) is the Earth Observing System (EOS) ClearingHOuse (ECHO). ECHO is the core metadata repository for the EOSDIS data centers providing a centralized mechanism for metadata and data discovery and retrieval. ECHO has undertaken an internal restructuring to meet the changing needs of scientists, the consistent advancement in technology, and the advent of new standards such as ISO 19115. These improvements were based on the following tenets for data discovery and retrieval: + There exists a set of 'core' metadata fields recommended for data discovery. + There exists a set of users who will require the entire metadata record for advanced analysis. + There exists a set of users who will require a 'core' set metadata fields for discovery only. + There will never be a cessation of new formats or a total retirement of all old formats. + Users should be presented metadata in a consistent format of their choosing. In order to address the previously listed items, ECHO's new metadata processing paradigm utilizes the following approach: + Identify a cross-format set of 'core' metadata fields necessary for discovery. + Implement format-specific indexers to extract the 'core' metadata fields into an optimized query capability. + Archive the original metadata in its entirety for presentation to users requiring the full record. + Provide on-demand translation of 'core' metadata to any supported result format. Lessons learned by the ECHO team while implementing its new metadata approach to support usage of the ISO 19115 standard will be presented. These lessons learned highlight some discovered strengths and weaknesses in the ISO 19115 standard as it is introduced to an existing metadata processing system.

The CMMI Product Suite and International Standards

DTIC Science & Technology

2006-07-01

standards: “2.3 Reference Documents 2.3.1 Applicable ISO /IEC documents, including ISO /IEC 12207 and ISO /IEC 15504.” “3.1 Development User Requirements...related international standards such as ISO 9001:2000, 12207 , 15288 © 2006 by Carnegie Mellon University Page 12 Key Supplements Needed...the Measurement Framework in ISO /IEC 15504; and • the Process Reference Model included in ISO /IEC 12207 . A possible approach has been developed for

Current situation of International Organization for Standardization/Technical Committee 249 international standards of traditional Chinese medicine.

PubMed

Liu, Yu-Qi; Wang, Yue-Xi; Shi, Nan-Nan; Han, Xue-Jie; Lu, Ai-Ping

2017-05-01

To review the current situation and progress of traditional Chinese medicine (TCM) international standards, standard projects and proposals in International Organization for Standardization (ISO)/ technical committee (TC) 249. ISO/TC 249 standards and standard projects on the ISO website were searched and new standard proposals information were collected from ISO/TC 249 National Mirror Committee in China. Then all the available data were summarized in 5 closely related items, including proposed time, proposed country, assigned working group (WG), current stage and classifification. In ISO/TC 249, there were 2 international standards, 18 standard projects and 24 new standard proposals proposed in 2014. These 44 standard subjects increased year by year since 2011. Twenty-nine of them were proposed by China, 15 were assigned to WG 4, 36 were in preliminary and preparatory stage and 8 were categorized into 4 fifields, 7 groups and sub-groups based on International Classifification Standards. A rapid and steady development of international standardization in TCM can be observed in ISO/TC 249.

CMMI (Trademark) for Development, Version 1.2

DTIC Science & Technology

2006-08-01

IEC TR 12207 Information Technology—Software Life Cycle Processes, 1995. http://www.jtc1-sc7.org. ISO 1998 International Organization for...We also consult other standards as needed, including the following: • ISO 9000 [ ISO 1987] • ISO /IEC 12207 [ ISO 1995] • ISO /IEC 15504 [ ISO 2006... ISO /IEC) body of standards. CMMs focus on improving processes in an organization. They contain the essential elements of effective processes for one

Environmental Analytical Measurement Uncertainty Estimation: Nested Hierarchical Approach

DTIC Science & Technology

2001-01-01

recognized. The International Organization of Standardization ( ISO / IEC 17025 ) standard for the general requirements for competence of testing and...Uncertainty in Measurement” (GUM) was published by the International Organization of Standardization ( ISO ) in collaboration with the seven member...the American National Standards Institute (ANSI) adoption of the ISO GUM. The ANSI adoption of the ISO GUM provides the mathematical model and

[Update to ISO 15189:2012, and future prospects].

PubMed

Shimoda, Katsuji; Kubono, Katsuo

2014-06-01

ISO (the International Organization for Standardization) is a worldwide federation of national standard bodies (ISO member bodies). The work of preparing international standards is normally carried out through ISO technical committees. ISO 15189 was prepared by Technical Committee ISO/TC 212, clinical laboratory testing, and in vitro diagnostic test systems. This third edition replaces the second edition (ISO 15189:2007), which was technically revised. Medical laboratory services are essential for patient care and, therefore, have to be available to meet the needs of all patients and the clinical personnel responsible for the care of those patients.

ISO 639-1 and ISO 639-2: International Standards for Language Codes. ISO 15924: International Standard for Names of Scripts.

ERIC Educational Resources Information Center

Byrum, John D.

This paper describes two international standards for the representation of the names of languages. The first (ISO 639-1), published in 1988, provides two-letter codes for 136 languages and was produced primarily to meet terminological needs. The second (ISO 639-2) appeared in late 1998 and includes three-letter codes for 460 languages. This list…

A pilot study of reference vibrotactile perception thresholds on the fingertip obtained with Malaysian healthy people using ISO 13091-1 equipment.

PubMed

Daud, Roshada; Maeda, Setsuo; Kameel, Nur Nazmin Mustafa; Ripin, Muhamad Yunus; Bakrun, Norazman; Md Zein, Raemy; Kido, Masaharu; Higuchi, Kiyotaka

2004-04-01

The purpose of this paper is to clarify the reference vibrotactile perception thresholds (VPT) for healthy people in Malaysia. The measurement equipment standard, ISO 13091-1, of the vibrotactile perception thresholds for the assessment of nerve dysfunction and the analysis and interpretation of measurements at the fingertips standard, ISO 13091-2, were published in ISO/TC108/SC4/WG8 on 2001 and 2003 individually. In the ISO 13091-2 standard, the reference VPT data were obtained from few research papers. Malaysian people's VPT data don't include to this standard. In Malaysia, when the VPT is using to diagnose of the hand-arm vibration syndrome, the reference VPT data need to compare with the worker's ones. But, Malaysia does not have the reference VPT data yet. So, in this paper, the VPT was measured by using ISO 13091-1 standard equipment to obtain the reference data for Malaysian people. And these data were compared with the ISO reference data on the ISO 13091-2 standard. From the comparison of these data, it was clear that the Malaysian healthy people's VPT data were consistent with the reference data of the ISO 13091-2 standard.

ISO radiation sterilization standards

NASA Astrophysics Data System (ADS)

Lambert, Byron J.; Hansen, Joyce M.

1998-06-01

This presentation provides an overview of the current status of the ISO radiation sterilization standards. The ISO standards are voluntary standards which detail both the validation and routine control of the sterilization process. ISO 11137 was approved in 1994 and published in 1995. When reviewing the standard you will note that less than 20% of the standard is devoted to requirements and the remainder is guidance on how to comply with the requirements. Future standards developments in radiation sterilization are being focused on providing additional guidance. The guidance that is currently provided in informative annexes of ISO 11137 includes: device/packaging materials, dose setting methods, and dosimeters and dose measurement, currently, there are four Technical Reports being developed to provide additional guidance: 1. AAMI Draft TIR, "Radiation Sterilization Material Qualification" 2. ISO TR 13409-1996, "Sterilization of health care products — Radiation sterilization — Substantiation of 25 kGy as a sterilization dose for small or infrequent production batches" 3. ISO Draft TR, "Sterilization of health care products — Radiation sterilization Selection of a sterilization dose for a single production batch" li]4. ISO Draft TR, "Sterilization of health care products — Radiation sterilization-Product Families, Plans for Sampling and Frequency of Dose Audits."

Screw-Thread Standards for Federal Services, 1957. Handbook H28 (1957), Part 3

DTIC Science & Technology

1957-09-01

MOUNTING THREADS PHOTOGRAPHIC EQUIPMENT THREADS ISO METRIC THREADS; MISCELLANEOUS THREADS CLASS 5 INTERFERENCE-FIT THREADS, TRIAL STANDARD WRENCH...Bibliography on measurement of pitch diameter by means of wires 60 Appendix 14. Metric screw-thread standards 61 1. ISO thread profiles...61 2. Standard series for ISO metric threads 62 3. Designations for ISO metric threads 62 Tables Page Table XII. 1.—Basic

CMMI(Registered) for Acquisition, Version 1.3. CMMI-ACQ, V1.3

DTIC Science & Technology

2010-11-01

and Software Engineering – System Life Cycle Processes [ ISO 2008b] ISO /IEC 27001 :2005 Information technology – Security techniques – Information...International Organization for Standardization and International Electrotechnical Commission. ISO /IEC 27001 Information Technology – Security Techniques...International Organization for Standardization/International Electrotechnical Commission ( ISO /IEC) body of standards. CMMs focus on improving processes

A/E/C Graphics Standard: Release 2.0 (formerly titled CAD Drafting Standard)

DTIC Science & Technology

2015-08-01

Tables Table 2-1. ANSI and ISO sheet size comparison . ....................................................................................... 3... Comparison of font types. ......................................................................................................... 45 Table 5-2. Inch...used (ISO A0 may be used for large maps). Table 2-1 lists the standard sizes of ANSI and ISO sheets. Table 2-1. ANSI and ISO sheet size comparison

Standards for Prognostics and Health Management (PHM) Techniques within Manufacturing Operations

DTIC Science & Technology

2014-10-02

SOCIETY 2014 3 International Organization for Standardization (ISO), the Machinery Information Management Open Standards Alliance ( MIMOSA ), SAE...X X X X ISO TC 184/SC 4 X ISO TC 184/SC 5 X X ISO/IEC JTC 1/SC 7 X MIMOSA —— X SAE International AQPIC X SAE...THE PROGNOSTICS AND HEALTH MANAGEMENT SOCIETY 2014 4 HDBK is supported by the Machinery Information Management Open Standards Alliance ( MIMOSA ), a

CMMI(Registered) for Development, Version 1.3

DTIC Science & Technology

2010-11-01

ISO /IEC 15288:2008 Systems and Software Engineering – System Life Cycle Processes [ ISO 2008b] ISO /IEC 27001 :2005 Information technology – Security...IEC 2005 International Organization for Standardization and International Electrotechnical Commission. ISO /IEC 27001 Information Technology...International Electrotechnical Commission ( ISO /IEC) body of standards. CMMs focus on improving processes in an organization. They contain the

Sustainable development induction in organizations: a convergence analysis of ISO standards management tools' parameters.

PubMed

Merlin, Fabrício Kurman; Pereira, Vera Lúciaduarte do Valle; Pacheco, Waldemar

2012-01-01

Organizations are part of an environment in which they are pressured to meet society's demands and acting in a sustainable way. In an attempt to meet such demands, organizations make use of various management tools, among which, ISO standards are used. Although there are evidences of contributions provided by these standards, it is questionable whether its parameters converge for a possible induction for sustainable development in organizations. This work presents a theoretical study, designed on structuralism world view, descriptive and deductive method, which aims to analyze the convergence of management tools' parameters in ISO standards. In order to support the analysis, a generic framework for possible convergence was developed, based on systems approach, linking five ISO standards (ISO 9001, ISO 14001, OHSAS 18001, ISO 31000 and ISO 26000) with sustainable development and positioning them according to organization levels (strategic, tactical and operational). The structure was designed based on Brundtland report concept. The analysis was performed exploring the generic framework for possible convergence based on Nadler and Tushman model. The results found the standards can contribute to a possible sustainable development induction in organizations, as long as they meet certain minimum conditions related to its strategic alignment.

International Organization for Standardization (ISO) 15189

PubMed Central

Schneider, Frank; Friedberg, Richard C.

2017-01-01

The College of American Pathologists (CAP) offers a suite of laboratory accreditation programs, including one specific to accreditation to the international organization for standardization (ISO) 15189 standard for quality management specific to medical laboratories. CAP leaders offer an overview of ISO 15189 including its components, internal audits, occurrence management, document control, and risk management. The authors provide a comparison of its own ISO 15189 program, CAP 15189, to the CAP Laboratory Accreditation Program. The authors conclude with why laboratories should use ISO 15189. PMID:28643484

The PDS4 Information Model and its Role in Agile Science Data Curation

NASA Astrophysics Data System (ADS)

Hughes, J. S.; Crichton, D.

2017-12-01

PDS4 is an information model-driven service architecture supporting the capture, management, distribution and integration of massive planetary science data captured in distributed data archives world-wide. The PDS4 Information Model (IM), the core element of the architecture, was developed using lessons learned from 20 years of archiving Planetary Science Data and best practices for information model development. The foundational principles were adopted from the Open Archival Information System (OAIS) Reference Model (ISO 14721), the Metadata Registry Specification (ISO/IEC 11179), and W3C XML (Extensible Markup Language) specifications. These provided respectively an object oriented model for archive information systems, a comprehensive schema for data dictionaries and hierarchical governance, and rules for rules for encoding documents electronically. The PDS4 Information model is unique in that it drives the PDS4 infrastructure by providing the representation of concepts and their relationships, constraints, rules, and operations; a sharable, stable, and organized set of information requirements; and machine parsable definitions that are suitable for configuring and generating code. This presentation will provide an over of the PDS4 Information Model and how it is being leveraged to develop and evolve the PDS4 infrastructure and enable agile curation of over 30 years of science data collected by the international Planetary Science community.

EPA STANDARDS NETWORK FACT SHEET: ISO 14000: INTERNATIONAL ENVIRONMENTAL MANAGEMENT STANDARDS

EPA Science Inventory

This flyer provides an overview of the ISO 14000 series of International standards, supplying a brief history, structure of the Technical Committee (TC) 207, structure of the U.S. Technical Advisory Group (TAG) to ISO TC-207, status of the Standards development as of June 1997, w...

Implementation of ISO 10110 optics drawing standards for the National Ignition Facility

NASA Astrophysics Data System (ADS)

Wang, David Y.; English, R. Edward, Jr.; Aikens, David M.

1999-11-01

The National Ignition Facility (NIF) project elected to implement ISO 10110 standard for the specifications of NIF optics drawings in 1996. More than 7,000 NIF large optics and 20,000 NIF small optics will be manufactured based on ISO 10110 indications. ISO 10110 standard meets many of the needs of the NIF optics specifications. It allows the optical engineer to quantify and clearly communicate the desired optical specifications. While no single drawing standard specifies all the requirements of high energy laser system, a combination of ISO 10110 standard with detailed notes make it possible to apply international drawing standards to the NIF laser system. This paper will briefly describe LLNL's interpretation and implementation of the ISO 10110 drawing standard, present some examples of NIF optics drawings, and discuss pros and cons of the indications from the perspective of this application. Emphasis will be given to the surface imperfection specifications, known as 5/, for the NIF optics.

Spatial Data Transfer Standard (SDTS), part 3 : ISO 8211 encoding

DOT National Transportation Integrated Search

1997-11-20

The ISO 8211 encoding provides a representation of a Spatial Data Transfer Standard (SDTS) file set in a standardized method enabling the file set to be exported to or imported from different media by general purpose ISO 8211 software.

A Strategy for Improved System Assurance

DTIC Science & Technology

2007-06-20

Quality (Measurements Life Cycle Safety, Security & Others) ISO /IEC 12207 * Software Life Cycle Processes ISO 9001 Quality Management System...14598 Software Product Evaluation Related ISO /IEC 90003 Guidelines for the Application of ISO 9001:2000 to Computer Software IEEE 12207 Industry...Implementation of International Standard ISO /IEC 12207 IEEE 1220 Standard for Application and Management of the System Engineering Process Use in

Application-driven strategies for efficient transfer of medical images over very high speed networks

NASA Astrophysics Data System (ADS)

Alsafadi, Yasser H.; McNeill, Kevin M.; Martinez, Ralph

1993-09-01

The American College of Radiology (ACR) and the National Electrical Manufacturing Association (NEMA) in 1982 formed the ACR-NEMA committee to develop a standard to enable equipment from different vendors to communicate and participate in a picture archiving and communications system (PACS). The standard focused mostly on interconnectivity issues and communication needs of PACS. It was patterned after the international standards organization open systems interconnection (ISO/OSI) reference model. Three versions of the standard appeared, evolving from simple point-to-point specification of connection between two medical devices to a complex standard of a network environment. However, fast changes in network software and hardware technologies makes it difficult for the standard to keep pace. This paper compares two versions of the ACR-NEMA standard and then describes a system that is used at the University of Arizona Intensive Care Unit. In this system, the application should specify the interface to network services and grade of service required. These provisions are suggested to make the application independent from evolving network technology and support true open systems.

ASSIP Study of Real-Time Safety-Critical Embedded Software-Intensive System Engineering Practices

DTIC Science & Technology

2008-02-01

and assessment 2. product engineering processes 3. tooling processes 6 | CMU/SEI-2008-SR-001 Slide 1 Process Standards IEC/ ISO 12207 Software...and technical effort to align with 12207 IEC/ ISO 15026 System & Software Integrity Levels Generic Safety SAE ARP 4754 Certification Considerations...Process Frameworks in revision – ISO 9001, ISO 9004 – ISO 15288/ ISO 12207 harmonization – RTCA DO-178B, MOD Standard UK 00-56/3, … • Methods & Tools

International Organization for Standardization (ISO) 15189.

PubMed

Schneider, Frank; Maurer, Caroline; Friedberg, Richard C

2017-09-01

The College of American Pathologists (CAP) offers a suite of laboratory accreditation programs, including one specific to accreditation to the international organization for standardization (ISO) 15189 standard for quality management specific to medical laboratories. CAP leaders offer an overview of ISO 15189 including its components, internal audits, occurrence management, document control, and risk management. The authors provide a comparison of its own ISO 15189 program, CAP 15189, to the CAP Laboratory Accreditation Program. The authors conclude with why laboratories should use ISO 15189. © The Korean Society for Laboratory Medicine.

Standardization by ISO to Ensure the Sustainability of Space Activities

NASA Astrophysics Data System (ADS)

Kato, A.; Lazare, B.; Oltrogge, D.; Stokes, H.

2013-08-01

The ISO / Technical Committee 20 / Sub-committee 14 develops debris-related standards and technical reports to mitigate debris and help ensure mission and space sustainability. While UN Guidelines and the IADC Guidelines encourage national governments and agencies to promote debris mitigation design and operation, the ISO standards will help the global space industry promote and sustain its space-related business. In this paper the scope and status of each ISO standard is discussed within an overall framework. A comparison with international guidelines is also provided to demonstrate the level of consistency. Finally, as a case study, the ISO standards are applied to a CubeSat mission, thus demonstrating their usability on a relatively recent and popular class of satellite.

Effectiveness of the Department of Defense Information Assurance Accreditation Process

DTIC Science & Technology

2013-03-01

meeting the requirements of ISO 27001, Information Security Management System. ISO 27002 provides “security techniques” or best practices that can be...efforts to the next level and implement a recognized standard such as the International Organization for Standards ( ISO ) 27000 Series of standards...implemented by an organization as part of their certification effort.15 Most likely, the main motivation a company would have for achieving an ISO

Home - JSM Portal

Science.gov Websites

chain MS ISO/IEC 27001: 2007 Information Security Management Systems MS ISO 50001: 2011 Energy . Announcements Popular Standards Popular Standards MS ISO 9001 :2015 Quality Management System(QMS) MS ISO 14001 : 2015 Environmental Management Systems(EMS) MS 1722:2011 & OHSAS 18001:2007 Occupational Health and

Evaluation of DVD-R for Archival Applications

NASA Technical Reports Server (NTRS)

Martin, Michael D.; Hyon, Jason J.

2000-01-01

For more than a decade, CD-ROM and CD-R have provided an unprecedented level of reliability, low cost and cross-platform compatibility to support federal data archiving and distribution efforts. However, it should be remembered that years of effort were required to achieve the standardization that has supported the growth of the CD industry. Incompatibilities in the interpretation of the ISO-9660 standard on different operating systems had to be dealt with, and the imprecise specifications in the Orange Book Part n and Part Hi led to incompatibilities between CD-R media and CD-R recorders. Some of these issues were presented by the authors at Optical Data Storage '95. The major current problem with the use of CD technology is the growing volume of digital data that needs to be stored. CD-ROM collections of hundreds of volumes and CD-R collections of several thousand volumes are becoming almost too cumbersome to be useful. The emergence of Digital Video Disks Recorder (DVD-R) technology promises to reduce the number of discs required for archive applications by a factor of seven while providing improved reliability. It is important to identify problem areas for DVD-R media and provide guidelines to manufacturers, file system developers and users in order to provide reliable data storage and interchange. The Data Distribution Laboratory (DDL) at NASA's Jet Propulsion Laboratory began its evaluation of DVD-R technology in early 1998. The initial plan was to obtain a DVD-Recorder for preliminary testing, deploy reader hardware to user sites for compatibility testing, evaluate the quality and longevity of DVD-R media and develop proof-of-concept archive collections to test the reliability and usability of DVD-R media and jukebox hardware.

Evaluating Education Quality in Terms of ISO9000 Standards

ERIC Educational Resources Information Center

Fengchun, Cheng; Vogel, Linda R.; Zhaoyu, Zheng

2014-01-01

While nations measure the quality of educational systems by different standards, many nations, such as China, have adopted the ISO9000 quality standards to assess the quality of schools. This article explores the various elements of the the ISO9000 standards and how each element relates to the various groups that are consumers or stakeholders in…

ISO 9000: The Librarian's Role.

ERIC Educational Resources Information Center

Dobson, Chris; Ernst, Carolyn

1999-01-01

Describes the special library's role in implementing ISO 9000 (i.e., a series of international quality-assurance standards developed by the International Organization of Standards). Topics discussed include document and data control, keeping the standards current, documentation of procedures, the ISO 9000 audit, and benefits for the library. (MES)

A Model for Joint Software Reviews

DTIC Science & Technology

1998-10-01

CEPMAN 1, 1996; Gabb, 1997], and with the growing popularity of outsourcing, they are becoming more important in the commercial sector [ ISO /IEC 12207 ...technical and management reviews [MIL-STD-498, 1996; ISO /IEC 12207 , 1995]. Management reviews occur after technical reviews, and are focused on the cost...characteristics, Standard (No. ISO /IEC 9126-1). [ ISO /IEC 12207 , 1995] Information Technology Software Life Cycle Processes, Standard (No. ISO /IEC 12207

The new ISO 6579-1: A real horizontal standard for detection of Salmonella, at last!

PubMed

Mooijman, Kirsten A

2018-05-01

Up to 2016, three international standard methods existed for the detection of Salmonella spp. in food, animal feed and samples from the primary production stage: ISO 6785:2001 for milk and milk products, ISO 6579:2002 for (other) food and animal feed and Annex D of ISO 6579:2007 for samples from the primary production stage. In 2009, an ISO/CEN working group started with the revision of ISO 6579:2002 with two main aims: combining the three aforementioned standards in one document and improving the information in ISO 6579:2002. Additionally it was decided to split ISO 6579 into three parts, where part 1 describes the detection, part 2 the enumeration by mini-MPN (published in 2012) and part 3 the serotyping of Salmonella (published in 2014). This paper describes the experiments and choices made for improving the part on detection of Salmonella (ISO 6579-1). The final voting stage on (draft) ISO 6579-1 was finished by the end of December 2016, with a positive outcome. Finally, a real horizontal standard became available for detection of Salmonella in food, animal feed, environmental samples in the area of food production and food handling and in samples from the primary production stage in 2017. Copyright © 2017 Elsevier Ltd. All rights reserved.

EarthServer: a Summary of Achievements in Technology, Services, and Standards

NASA Astrophysics Data System (ADS)

Baumann, Peter

2015-04-01

Big Data in the Earth sciences, the Tera- to Exabyte archives, mostly are made up from coverage data, according to ISO and OGC defined as the digital representation of some space-time varying phenomenon. Common examples include 1-D sensor timeseries, 2-D remote sensing imagery, 3D x/y/t image timese ries and x/y/z geology data, and 4-D x/y/z/t atmosphere and ocean data. Analytics on such data requires on-demand processing of sometimes significant complexity, such as getting the Fourier transform of satellite images. As network bandwidth limits prohibit transfer of such Big Data it is indispensable to devise protocols allowing clients to task flexible and fast processing on the server. The transatlantic EarthServer initiative, running from 2011 through 2014, has united 11 partners to establish Big Earth Data Analytics. A key ingredient has been flexibility for users to ask whatever they want, not impeded and complicated by system internals. The EarthServer answer to this is to use high-level, standards-based query languages which unify data and metadata search in a simple, yet powerful way. A second key ingredient is scalability. Without any doubt, scalability ultimately can only be achieved through parallelization. In the past, parallelizing cod e has been done at compile time and usually with manual intervention. The EarthServer approach is to perform a samentic-based dynamic distribution of queries fragments based on networks optimization and further criteria. The EarthServer platform is comprised by rasdaman, the pioneer and leading Array DBMS built for any-size multi-dimensional raster data being extended with support for irregular grids and general meshes; in-situ retrieval (evaluation of database queries on existing archive structures, avoiding data import and, hence, duplication); the aforementioned distributed query processing. Additionally, Web clients for multi-dimensional data visualization are being established. Client/server interfaces are strictly based on OGC and W3C standards, in particular the Web Coverage Processing Service (WCPS) which defines a high-level coverage query language. Reviewers have attested EarthServer that "With no doubt the project has been shaping the Big Earth Data landscape through the standardization activities within OGC, ISO and beyond". We present the project approach, its outcomes and impact on standardization and Big Data technology, and vistas for the future.

Making the Business Case for Software Assurance

DTIC Science & Technology

2009-04-01

and Capability dEtermination-SPICE, ISO /IEC 15504, 1998. [ ISO 2007] International Organization for Standardization. " ISO /IEC 27001 & 27002 ...Implementing the Process Areas 6.2.7 Differences Between the CMMI and Software CMM Process Areas 6.3 The CMMI Appraisal Process 6.4 Adapting ISO 15504 to...Secure Software Assurance 6.4.1 Assessment and the Secure Life Cycle 6.4.2 ISO 15504 Capability Levels 6.5 Adapting the ISOIIEC 21287 Standard Approach to

ISO 9000 Quality Management System

NASA Astrophysics Data System (ADS)

Hadjicostas, Evsevios

The ISO 9000 series describes a quality management system applicable to any organization. In this chapter we present the requirements of the standard in a way that is as close as possible to the needs of analytical laboratories. The sequence of the requirements follows that in the ISO 9001:2008 standard. In addition, the guidelines for performance improvement set out in the ISO 9004 are reviewed. Both standards should be used as a reference as well as the basis for further elaboration.

Quality evaluation of terpinen-4-ol-type Australian tea tree oils and commercial products: an integrated approach using conventional and chiral GC/MS combined with chemometrics.

PubMed

Wang, Mei; Zhao, Jianping; Avula, Bharathi; Wang, Yan-Hong; Chittiboyina, Amar G; Parcher, Jon F; Khan, Ikhlas A

2015-03-18

GC/MS, chiral GC/MS, and chemometric techniques were used to evaluate a large set (n=104) of tea tree oils (TTO) and commercial products purported to contain TTO. Twenty terpenoids were determined in each sample and compared with the standards specified by ISO-4730-2004. Several of the oil samples that were ISO compliant when distilled did not meet the ISO standards in this study primarily due to the presence of excessive p-cymene and/or depletion of terpinenes. Forty-nine percent of the commercial products did not meet the ISO specifications. Four terpenes, viz., α-pinene, limonene, terpinen-4-ol, and α-terpineol, present in TTOs with the (+)-isomer predominant were measured by chiral GC/MS. The results clearly indicated that 28 commercial products contained excessive (+)-isomer or contained the (+)-isomer in concentrations below the norm. Of the 28 outliers, 7 met the ISO standards. There was a substantial subset of commercial products that met ISO standards but displayed unusual enantiomeric+/-ratios. A class predictive model based on the oils that met ISO standards was constructed. The outliers identified by the class predictive model coincided with the samples that displayed an abnormal chiral ratio. Thus, chiral and chemometric analyses could be used to confirm the identification of abnormal commercial products including those that met all of the ISO standards.

Rolling Deck to Repository (R2R): Big Data and Standard Services for the Fleet Community

NASA Astrophysics Data System (ADS)

Arko, R. A.; Carbotte, S. M.; Chandler, C. L.; Smith, S. R.; Stocks, K. I.

2014-12-01

The Rolling Deck to Repository (R2R; http://rvdata.us/) program curates underway environmental sensor data from the U.S. academic oceanographic research fleet, ensuring data sets are routinely and consistently documented, preserved in long-term archives, and disseminated to the science community. Currently 25 in-service vessels contribute 7 terabytes of data to R2R each year, acquired from a full suite of geophysical, oceanographic, meteorological, and navigational sensors on over 400 cruises worldwide. To accommodate this large volume and variety of data, R2R has developed highly efficient stewardship procedures. These include scripted "break out" of cruise data packages from each vessel based on standard filename and directory patterns; automated harvest of cruise metadata from the UNOLS Office via Web Services and from OpenXML-based forms submitted by vessel operators; scripted quality assessment routines that calculate statistical summaries and standard ratings for selected data types; adoption of community-standard controlled vocabularies for vessel codes, instrument types, etc, provided by the NERC Vocabulary Server, in lieu of maintaining custom local term lists; and a standard package structure based on the IETF BagIt format for delivering data to long-term archives. Documentation and standard post-field products, including quality-controlled shiptrack navigation data for every cruise, are published in multiple services and formats to satisfy a diverse range of clients. These include Catalog Service for Web (CSW), GeoRSS, and OAI-PMH discovery services via a GeoNetwork portal; OGC Web Map and Feature Services for GIS clients; a citable Digital Object Identifier (DOI) for each dataset; ISO 19115-2 standard geospatial metadata records suitable for submission to long-term archives as well as the POGO global catalog; and Linked Open Data resources with a SPARQL query endpoint for Semantic Web clients. R2R participates in initiatives such as the Ocean Data Interoperability Platform (ODIP) and the NSF EarthCube OceanLink project to promote community-standard formats, vocabularies, and services among ocean data providers.

[Accreditation of clinical laboratories based on ISO standards].

PubMed

Kawai, Tadashi

2004-11-01

International Organization for Standardization (ISO) have published two international standards (IS) to be used for accreditation of clinical laboratories; ISO/IEC 17025:1999 and ISO 15189:2003. Any laboratory accreditation body must satisfy the requirements stated in ISO/IEC Guide 58. In order to maintain the quality of the laboratory accreditation bodies worldwide, the International Laboratory Accreditation Cooperation (ILAC) has established the mutual recognition arrangement (MRA). In Japan, the International Accreditation Japan (IAJapan) and the Japan Accreditation Board for Conformity Assessment (JAB) are the members of the ILAC/MRA group. In 2003, the Japanese Committee for Clinical Laboratory Standards (JCCLS) and the JAB have established the Development Committee of Clinical Laboratory Accreditation Program (CLAP), in order to establish the CLAP, probably starting in 2005.

Corporate environmental policy statements in mainland China: to what extent do they conform to ISO 14000 documentation?

PubMed

Chung, Shan Shan; Fryxell, Gerald E; Lo, Carlos W H

2005-04-01

For decades, industry has been the main source of pollution in China. Determined to make changes, the mainland Chinese authorities have decided to promote mechanisms that incorporate environmental concerns into the internal management of enterprises. This is manifested in the rapid adoption of the ISO14000 standards, including a significant increase in ISO14001 registrations in China. Thus, this study examined the environmental policy statements of 106 certified facilities in mainland China against a strict interpretation of the mandatory requirements of the ISO 14001:1996 standard and the nonmandatory ISO14004 requirements in order to shed some light on the implementation of environmental management systems in an emerging economic giant. It was decided to analyze the environmental policy statement because such a statement is a core element in the ISO system of environmental management of each facility and there are relatively clear and specific requirements on what an environmental policy statement shall include. An analysis of the contents of the environmental policy statements shows that conformance to the relevant requirements of both the mandatory ISO14001 standard and the nonmandatory ISO14004 standard is far from impressive and that the facilities in our sample seldom went beyond the minimum requirements. By using ISO14001 and ISO14004 conformance scores as the dependent variables, we found that conformity to ISO14001 and overall conformance to ISO14000 series can be explained to some extent by the degree of top management commitment, the experience with informal environmental management systems, and the form of ownership of the facilities.

An Evaluation Methodology for the Usability and Security of Cloud-based File Sharing Technologies

DTIC Science & Technology

2012-09-01

FISMA, ISO 27001 , FIPS 140-2, and ISO 270001) indicate a cloud-based service’s compliance with industry standard security controls, management and...Information Assurance IEEE Institute of Electrical and Electronics Engineers IT Information Technology ITS Insider Threat Study ISO International...effectively, efficiently and with satisfaction” (International Organization for Standardization [ ISO ], 1998). Alternately, information security

Building Assured Systems Framework

DTIC Science & Technology

2010-09-01

of standards such as ISO 27001 as frameworks [NASCIO 2009]. In this context, a framework is a standard intended to assist in auditing and compliance...Information Security ISO /IEC 27004 Information technology – Security techniques - Information security management measurement ISO /IEC 15939, System and

Understanding and Leveraging a Supplier’s CMMI Efforts: A Guidebook for Acquirers (Revised for V1.3)

DTIC Science & Technology

2011-09-01

and SCAMPI (e.g., ISO /IEC 15288, 12207 , 15504; ISO 9001, EIA 632, and IEEE 1220), or if there are processes to be implemented that are not captured...process descriptions and tailoring as well as any formal audit results. ISO -9001:2008 is a quality management standard for development created and...maintained by the International Organisation for Standardisation ( ISO ). The American National Standard equivalent is ANSI/ ISO /ASQ Q9001-2008

Understanding and Leveraging a Supplier’s CMMI(Trademark) Efforts: A Guidebook for Acquirers

DTIC Science & Technology

2007-03-01

other than CMMI and SCAMPI (e.g., ISO /IEC 15288, 12207 , 15504; ISO 9001, EIA 632, and IEEE 1220), or if there are processes to be implemented that are...tailoring as well as any formal audit results. 40 | CMU/SEI-2007-TR-004 ISO -9001:2000 is a quality management standard for development created and...maintained by the International Organisation for Standardisation ( ISO ). The American National Standard equivalent is ANSI/ ISO /ASQ Q9001-2000

A Structured Approach for Reviewing Architecture Documentation

DTIC Science & Technology

2009-12-01

as those found in ISO 12207 [ ISO /IEC 12207 :2008] (for software engineering), ISO 15288 [ ISO /IEC 15288:2008] (for systems engineering), the Rational...Open Distributed Processing - Reference Model: Foundations ( ISO /IEC 10746-2). 1996. [ ISO /IEC 12207 :2008] International Organization for...Standardization & International Electrotechnical Commission. Sys- tems and software engineering – Software life cycle processes ( ISO /IEC 12207 ). 2008. [ ISO

Gloss uniformity measurement update for ISO/IEC 19751

NASA Astrophysics Data System (ADS)

Ng, Yee S.; Cui, Chengwu; Kuo, Chunghui; Maggard, Eric; Mashtare, Dale; Morris, Peter

2005-01-01

To address the standardization issues of perceptually based image quality for printing systems, ISO/IEC JTC1/SC28, the standardization committee for office equipment chartered the W1.1 project with the responsibility of drafting a proposal for an international standard for the evaluation of printed image quality1. An ISO draft Standard2, ISO/WD 19751-1, Office Equipment - Appearance-based image quality standards for printers - Part 1: Overview, Procedure and Common Methods, 2004 describes the overview of this multi-part appearance-based image quality standard. One of the ISO 19751 multi-part Standard"s tasks is to address the appearance-based gloss and gloss uniformity issues (in ISO 19751-2). This paper summarizes the current status and technical progress since the last two updates3, 4. In particular, we will be discussion our attempt to include 75 degree gloss (G75) objective measurement5 in differential gloss and within-page gloss uniformity. The result for a round-robin experiment involving objective measurement of differential gloss using G60 and G75 gloss measurement geometry is described. The results for two perceptual-based round-robin experiments relating to haze effect on the perception of gloss, and gloss artifacts (gloss streaks/bands, gloss graininess/mottle) are discussed.

Gloss uniformity measurement update for ISO/IEC 19751

NASA Astrophysics Data System (ADS)

Ng, Yee S.; Cui, Chengwu; Kuo, Chunghui; Maggard, Eric; Mashtare, Dale; Morris, Peter

2004-10-01

To address the standardization issues of perceptually based image quality for printing systems, ISO/IEC JTC1/SC28, the standardization committee for office equipment chartered the W1.1 project with the responsibility of drafting a proposal for an international standard for the evaluation of printed image quality1. An ISO draft Standard2, ISO/WD 19751-1, Office Equipment - Appearance-based image quality standards for printers - Part 1: Overview, Procedure and Common Methods, 2004 describes the overview of this multi-part appearance-based image quality standard. One of the ISO 19751 multi-part Standard"s tasks is to address the appearance-based gloss and gloss uniformity issues (in ISO 19751-2). This paper summarizes the current status and technical progress since the last two updates3, 4. In particular, we will be discussion our attempt to include 75 degree gloss (G75) objective measurement5 in differential gloss and within-page gloss uniformity. The result for a round-robin experiment involving objective measurement of differential gloss using G60 and G75 gloss measurement geometry is described. The results for two perceptual-based round-robin experiments relating to haze effect on the perception of gloss, and gloss artifacts (gloss streaks/bands, gloss graininess/mottle) are discussed.

Comparison of prosthetic feet prescribed to active individuals using ISO standards.

PubMed

Mason, Zachary D; Pearlman, Jon; Cooper, Rory A; Laferrier, Justin Z

2011-12-01

Little research has been done on the robustness of prosthetic feet prescribed to military personnel, and manufacturers are not required to test their products prior to sale. This is problematic because the prosthetic feet used by active individuals are subjected to loading conditions not seen in normal gait. To evaluate whether commercially available heavy-duty prosthetic feet intended for use by military personnel meet ISO 10328 standards. Bench testing of heavy-duty prosthetic feet using ISO 10328 standards. Prosthetic feet from three different manufacturers were tested according to ISO 10328 standards, using a testing frame fitted with axial load and displacement transducers. Pass/fail information was recorded as well as the stiffness and creep of each foot before and after cyclic testing. All feet passed the ISO 10328 standards at the highest loading level, and some significant differences were found within a given model of prosthesis when comparing stiffness and creep before and after cyclic testing. This study demonstrated that manufacturers of heavy-duty prosthetic feet adhere to the voluntary ISO 10328 standards. However, these standards may be insufficient because the tests simulate only idealized gait. Further development of the standards may be necessary to reproduce the circumstances that occur during extreme usage to ensure that prosthetic feet do not fail.

46 CFR 162.050-4 - Incorporation by reference: Where can I get a copy of the publications mentioned in this part?

Code of Federal Regulations, 2011 CFR

2011-10-01

... Standardization (ISO) 1, rue de Varembé, Case postale 56, CH-1211 Geneva 20, Switzerland (Internet: http://www.iso.org): (1) International Standard ISO 8217 Third edition 2005-11-01, Petroleum products—Fuels (class F)—Specifications of marine fuels (“ISO 8217”), incorporation by reference approved for § 162.050-20. (2...

46 CFR 162.050-4 - Incorporation by reference: Where can I get a copy of the publications mentioned in this part?

Code of Federal Regulations, 2010 CFR

2010-10-01

... Standardization (ISO) 1, rue de Varembé, Case postale 56, CH-1211 Geneva 20, Switzerland (Internet: http://www.iso.org): (1) International Standard ISO 8217 Third edition 2005-11-01, Petroleum products—Fuels (class F)—Specifications of marine fuels (“ISO 8217”), incorporation by reference approved for § 162.050-20. (2...

A Proposed Interpretation of the ISO 10015 and Implications for HRD Theory and Research

ERIC Educational Resources Information Center

Jacobs, Ronald L.; Wang, Bryan

2007-01-01

While recent discussions of ISO 10015- Guidelines for Training have done much to promote the need for the standard, no interpretation of the standard has been presented that would guide its actual implementation. This paper proposes an interpretation of the ISO 10015 based on the specifications of the guideline and two other standards related to…

A future Outlook: Web based Simulation of Hydrodynamic models

NASA Astrophysics Data System (ADS)

Islam, A. S.; Piasecki, M.

2003-12-01

Despite recent advances to present simulation results as 3D graphs or animation contours, the modeling user community still faces some shortcomings when trying to move around and analyze data. Typical problems include the lack of common platforms with standard vocabulary to exchange simulation results from different numerical models, insufficient descriptions about data (metadata), lack of robust search and retrieval tools for data, and difficulties to reuse simulation domain knowledge. This research demonstrates how to create a shared simulation domain in the WWW and run a number of models through multi-user interfaces. Firstly, meta-datasets have been developed to describe hydrodynamic model data based on geographic metadata standard (ISO 19115) that has been extended to satisfy the need of the hydrodynamic modeling community. The Extended Markup Language (XML) is used to publish this metadata by the Resource Description Framework (RDF). Specific domain ontology for Web Based Simulation (WBS) has been developed to explicitly define vocabulary for the knowledge based simulation system. Subsequently, this knowledge based system is converted into an object model using Meta Object Family (MOF). The knowledge based system acts as a Meta model for the object oriented system, which aids in reusing the domain knowledge. Specific simulation software has been developed based on the object oriented model. Finally, all model data is stored in an object relational database. Database back-ends help store, retrieve and query information efficiently. This research uses open source software and technology such as Java Servlet and JSP, Apache web server, Tomcat Servlet Engine, PostgresSQL databases, Protégé ontology editor, RDQL and RQL for querying RDF in semantic level, Jena Java API for RDF. Also, we use international standards such as the ISO 19115 metadata standard, and specifications such as XML, RDF, OWL, XMI, and UML. The final web based simulation product is deployed as Web Archive (WAR) files which is platform and OS independent and can be used by Windows, UNIX, or Linux. Keywords: Apache, ISO 19115, Java Servlet, Jena, JSP, Metadata, MOF, Linux, Ontology, OWL, PostgresSQL, Protégé, RDF, RDQL, RQL, Tomcat, UML, UNIX, Windows, WAR, XML

Quality Assurance through ISO 9000.

ERIC Educational Resources Information Center

Zuckerman, Amy

2000-01-01

Created in 1987 by the International Organization for Standardization, in Geneva, Switzerland, ISO 9000 is attempting to develop a world standard to help companies and other institutions measure and monitor their quality-control efforts. This article describes four school districts' successful efforts to secure ISO 9000 certification. (MLH)

Evaluation of ISO EN 13606 as a result of its implementation in XML

PubMed Central

Sun, Shanghua; Hassan, Taher; Kalra, Dipak

2013-01-01

The five parts of the ISO EN 13606 standard define a means by which health-care records can be exchanged between computer systems. Starting within the European standardisation process, it has now become internationally ratified in ISO. However, ISO standards do not require that a reference implementation be provided, and in order for ISO EN 13606 to deliver the expected benefits, it must be provided not as a document, but as an operational system that is not vendor specific. This article describes the evolution of an Extensible Markup Language (XML) Schema through three iterations, each of which emphasised one particular approach to delivering an executable equivalent to the printed standard. Developing these operational versions and incorporating feedback from users of these demonstrated where implementation compromises were needed and exposed defects in the standard. These are discussed herein. They may require a future technical revision to ISO EN 13606 to resolve the issues identified. PMID:23995217

Experimenting Design and Implementation of an Educational Services Management System Based on ISO/IEC 20000 Standard

NASA Astrophysics Data System (ADS)

Lezcano, Jean-Marc; Adachihara, Hatsuo; Prunier, Marc

European higher education organizations are encouraged to implement quality management practices. Existing quality standards and frameworks do not capitalize an important set of best practices addressing educational services delivery. The ISO/IEC 20000 standard, elaborated from IT service management issues, is widening its field of application and may represent an interesting alternative. A specific approach is needed to apprehend the particular nature of educational services, consider the systemic cooperating roles of educational system and learning system, and define ISO/IEC 20000 vocabulary and concepts adapted to the domain. ISO/IEC 20000 may provide an answer to European Standard Guideline compliance and improve educational services management. The current experimentation is expected to cast light on the complexity, practicality and effectiveness of the use of ISO/IEC 20000 in a first field of "non IT" services.

A Data Specification for Software Project Performance Measures: Results of a Collaboration on Performance Measurement

DTIC Science & Technology

2008-07-01

cycle Evolution of a system, product, service, project or other human-made entity from conception through retirement [ ISO 12207 ]. Logical line of...012 [ ISO 1995] International Organization for Standardization. ISO /IEC 12207 :1995—Information technology— Software life cycle processes. http...definitions, authors were asked to use or align with already existing standards such as those available through ISO and IEEE when possible. Literature

Cyber-Forensic Research Experimentation and Test Environment (CREATE)

DTIC Science & Technology

2002-10-01

group. The existence of this forum would tend to support the ISO 17025 provision mentioned earlier. It would also support...criteria encompass the requirements of ISO / IEC Guide 25, and the relevant requirements of ISO 9002 (ANSI/ASQC Q92-1987) as suppliers of calibration or...there are no current standards, they have decided to abide by the International Organization for Standards ( ISO ) 17025,25 which has a provision for

Clean Assembly of Genesis Collector Canister for Flight: Lessons for Planetary Sample Return

NASA Technical Reports Server (NTRS)

Allton, J. H.; Stansbery, E. K.; Allen, C. C.; Warren, J. L.; Schwartz, C. M.

2007-01-01

Measurement of solar composition in the Genesis collectors requires not only high sensitivity but very low blanks; thus, very strict collector contamination minimization was required beginning with mission planning and continuing through hardware design, fabrication, assembly and testing. Genesis started with clean collectors and kept them clean inside of a canister. The mounting hardware and container for the clean collectors were designed to be cleanable, with access to all surfaces for cleaning. Major structural components were made of aluminum and cleaned with megasonically energized ultrapure water (UPW). The UPW purity was >18 M resistivity. Although aluminum is relatively difficult to clean, the Genesis protocol achieved level 25 and level 50 cleanliness on large structural parts; however, the experience suggests that surface treatments may be helpful on future missions. All cleaning was performed in an ISO Class 4 (Class 10) cleanroom immediately adjacent to an ISO Class 4 assembly room; thus, no plastic packaging was required for transport. Persons assembling the canister were totally enclosed in cleanroom suits with face shield and HEPA filter exhaust from suit. Interior canister materials, including fasteners, were installed, untouched by gloves, using tweezers and other stainless steel tools. Sealants/lubricants were not exposed inside the canister, but vented to the exterior and applied in extremely small amounts using special tools. The canister was closed in ISO Class 4, not to be opened until on station at Earth-Sun L1. Throughout the cleaning and assembly, coupons of reference materials that were cleaned at the same time as the flight hardware were archived for future reference and blanks. Likewise reference collectors were archived. Post-mission analysis of collectors has made use of these archived reference materials.

An assessment model for quality management

NASA Astrophysics Data System (ADS)

Völcker, Chr.; Cass, A.; Dorling, A.; Zilioli, P.; Secchi, P.

2002-07-01

SYNSPACE together with InterSPICE and Alenia Spazio is developing an assessment method to determine the capability of an organisation in the area of quality management. The method, sponsored by the European Space Agency (ESA), is called S9kS (SPiCE- 9000 for SPACE). S9kS is based on ISO 9001:2000 with additions from the quality standards issued by the European Committee for Space Standardization (ECSS) and ISO 15504 - Process Assessments. The result is a reference model that supports the expansion of the generic process assessment framework provided by ISO 15504 to nonsoftware areas. In order to be compliant with ISO 15504, requirements from ISO 9001 and ECSS-Q-20 and Q-20-09 have been turned into process definitions in terms of Purpose and Outcomes, supported by a list of detailed indicators such as Practices, Work Products and Work Product Characteristics. In coordination with this project, the capability dimension of ISO 15504 has been revised to be consistent with ISO 9001. As contributions from ISO 9001 and the space quality assurance standards are separable, the stripped down version S9k offers organisations in all industries an assessment model based solely on ISO 9001, and is therefore interesting to all organisations, which intend to improve their quality management system based on ISO 9001.

Quality Systems and ISO 9000 in Higher Education.

ERIC Educational Resources Information Center

Lundquist, Robert

1997-01-01

Examines quality assurance systems in higher education in general and of ISO 9000, a set of international quality standards, in particular. Reports on a survey of 23 institutions worldwide concerning implementation of quality systems and application of the ISO 9000 standards. Concludes that while institutions have found the quality assurance…

ISO 9001 in a neonatal intensive care unit (NICU).

PubMed

Vitner, Gad; Nadir, Erez; Feldman, Michael; Yurman, Shmuel

2011-01-01

The aim of this paper is to present the process for approving and certifying a neonatal intensive care unit to ISO 9001 standards. The process started with the department head's decision to improve services quality before deciding to achieve ISO 9001 certification. Department processes were mapped and quality management mechanisms were developed. Process control and performance measurements were defined and implemented to monitor the daily work. A service satisfaction review was conducted to get feedback from families. In total, 28 processes and related work instructions were defined. Process yields showed service improvements. Family satisfaction improved. The paper is based on preparing only one neonatal intensive care unit to the ISO 9001 standard. The case study should act as an incentive for hospital managers aiming to improve service quality based on the ISO 9001 standard. ISO 9001 is becoming a recommended tool to improve clinical service quality.

CrossTalk: The Journal of Defense Software Engineering. Volume 21, Number 12

DTIC Science & Technology

2008-12-01

that provide recognized certifications, and examples of how these standards relate. The first qual- ification ( ISO 27000 ) should be strongly considered...Several ISO 20000 requirements relate to ISO 27000 and ISO 9001. As a result, achieving ISO 20000 cer- tification helps an organization to also...achieve ISO 9001 and ISO 27000 certifica- tion. ISO 20000 certification can also help organizations with CMMI® appraisals. Table 1 also shows some of the

Validation of the RisingSun RS-651 Blood Pressure Monitor Based on Auscultation in Adults According to the ANSI/AAMI/ISO 81060-2:2013 Standard.

PubMed

She, Jin; Guan, Xizhou; Liu, Yanyong; Xiang, Haiyan

2016-12-01

This study validated the RisingSun RS-651 blood pressure (BP) monitor based on auscultation in adults according to the American National Standards Institute/Association for the Advancement of Medical Instrumentation/International Organization for Standardization (ANSI/AAMI/ISO) 81060-2:2013 standard. The RS-651 device was evaluated in a study of 97 participants. The same arm simultaneous method, as defined in the ANSI/AAMI/ISO standard, was used. The mean differences±standard deviation for criterion 1 were 0.8±2.3 mm Hg for systolic BP (SBP) and -0.1±2.9 mm Hg for diastolic BP (DBP). Analysis for criterion 2 resulted in values of 0.8±1.5 mm Hg for SBP and -0.1±2.1 mm Hg for DBP. All of the data fulfilled the ANSI/AAMI/ISO 81060-2:2013 standard requirements to pass the validation. The RisingSun RS-651 device can be recommended for both clinical and self/home use in adults according to the ANSI/AAMI/ISO 81060-2:2013 standard. © 2016 The Authors. The Journal of Clinical Hypertension Published by Wiley Periodicals, Inc.

A data types profile suitable for use with ISO EN 13606.

PubMed

Sun, Shanghua; Austin, Tony; Kalra, Dipak

2012-12-01

ISO EN 13606 is a five part International Standard specifying how Electronic Healthcare Record (EHR) information should be communicated between different EHR systems and repositories. Part 1 of the standard defines an information model for representing the EHR information itself, including the representation of types of data value. A later International Standard, ISO 21090:2010, defines a comprehensive set of models for data types needed by all health IT systems. This latter standard is vast, and duplicates some of the functions already handled by ISO EN 13606 part 1. A profile (sub-set) of ISO 21090 would therefore be expected to provide EHR system vendors with a more specially tailored set of data types to implement and avoid the risk of providing more than one modelling option for representing the information properties. This paper describes the process and design decisions made for developing a data types profile for EHR interoperability.

Standardization: colorfull or dull?

NASA Astrophysics Data System (ADS)

van Nes, Floris L.

2003-01-01

After mentioning the necessity of standardization in general, this paper explains how human factors, or ergonomics standardization by ISO and the deployment of information technology were linked. Visual display standardization is the main topic; the present as well as the future situation in this field are treated, mainly from an ISO viewpoint. Some observations are made about the necessary and interesting co-operation between physicists and psychologists, of different nationality, who both may be employed by either private enterprise or governmental institutions, in determining visual display requirements. The display standard that is to succeed the present ISO standards in this area: ISO 9241-3, -7, -8 and ISO 13406-1, -2, will have a scope that is not restricted to office tasks. This means a large extension of the contexts for which display requirements have to be investigated and specified especially if mobile use of displays, under outdoor lighting conditions, is included. The new standard will be structured in such a way that it is better accessible than the present ones for different categories of standards users. The subject color in the new standard is elaborated here. A number of questions are asked as to which requirements on color rendering should be made, taking new research results into account, and how far the new standard should go in making recommendations to the display user.

The American Association for Laboratory Accreditation

DTIC Science & Technology

2011-03-28

ISO / IEC 17025 ...Information Technology A2LA DoD ELAP Program n All labs are assessed to ISO / IEC 17025 :2005 as the base standard. n In addition, the requirements of 2003...n Inspection Body Accreditation ( ISO / IEC 17020) n Proficiency Testing Providers ( ISO / IEC 17043) n Reference Materials Producers ( ISO Guide

The Value of Harmonizing Multiple Improvement Technologies: A Process Improvement Professional’s View

DTIC Science & Technology

2008-03-01

maturity models and ISO standards, specifically CMMI, CMMI-ACQ and ISO 12207 . Also, the improvement group supplemented their selection of these...compliant with the technologies and standards that are important to the business. Lockheed Martin IS&GS has integrated CMMI, EIA 632, ISO 12207 , and Six...geographically dispersed organization. [Siviy 07-1] Northrop Grumman Mission Systems has integrated CMMI, ISO 9001, AS9100, and Six Sigma, as well as a

ISO 9000 and Malcolm Baldrige: In Training and Education. A Practical Application Guide.

ERIC Educational Resources Information Center

Russo, C. W. Russ

This book is addressed to educators and work-place trainers interested in applying the Malcolm Baldrige award criteria and/or the International Organization for Standardization (ISO) 9000 training guidelines for program improvement. An initial section compares and contrasts the ISO standards and the Malcolm Baldrige National Quality Award…

A universal standard for the validation of blood pressure measuring devices: Association for the Advancement of Medical Instrumentation/European Society of Hypertension/International Organization for Standardization (AAMI/ESH/ISO) Collaboration Statement.

PubMed

Stergiou, George S; Alpert, Bruce; Mieke, Stephan; Asmar, Roland; Atkins, Neil; Eckert, Siegfried; Frick, Gerhard; Friedman, Bruce; Graßl, Thomas; Ichikawa, Tsutomu; Ioannidis, John P; Lacy, Peter; McManus, Richard; Murray, Alan; Myers, Martin; Palatini, Paolo; Parati, Gianfranco; Quinn, David; Sarkis, Josh; Shennan, Andrew; Usuda, Takashi; Wang, Jiguang; Wu, Colin O; O'Brien, Eoin

2018-03-01

: In the last 30 years, several organizations, such as the US Association for the Advancement of Medical Instrumentation (AAMI), the British Hypertension Society, the European Society of Hypertension (ESH) Working Group on Blood Pressure (BP) Monitoring and the International Organization for Standardization (ISO) have developed protocols for clinical validation of BP measuring devices. However, it is recognized that science, as well as patients, consumers and manufacturers would be best served if all BP measuring devices were assessed for accuracy according to an agreed single validation protocol that had global acceptance. Therefore, an international initiative was taken by AAMI, ESH and ISO experts who agreed to develop a universal standard for device validation. This statement presents the key aspects of a validation procedure, which were agreed by the AAMI, ESH and ISO representatives as the basis for a single universal validation protocol. As soon as the AAMI/ESH/ISO standard is fully developed, this will be regarded as the single universal standard and will replace all other previous standards/protocols.

A Universal Standard for the Validation of Blood Pressure Measuring Devices: Association for the Advancement of Medical Instrumentation/European Society of Hypertension/International Organization for Standardization (AAMI/ESH/ISO) Collaboration Statement.

PubMed

Stergiou, George S; Alpert, Bruce; Mieke, Stephan; Asmar, Roland; Atkins, Neil; Eckert, Siegfried; Frick, Gerhard; Friedman, Bruce; Graßl, Thomas; Ichikawa, Tsutomu; Ioannidis, John P; Lacy, Peter; McManus, Richard; Murray, Alan; Myers, Martin; Palatini, Paolo; Parati, Gianfranco; Quinn, David; Sarkis, Josh; Shennan, Andrew; Usuda, Takashi; Wang, Jiguang; Wu, Colin O; O'Brien, Eoin

2018-03-01

In the past 30 years, several organizations, such as the US Association for the Advancement of Medical Instrumentation (AAMI), the British Hypertension Society, the European Society of Hypertension (ESH) Working Group on Blood Pressure (BP) Monitoring, and the International Organization for Standardization (ISO), have developed protocols for clinical validation of BP measuring devices. However, it is recognized that science, as well as patients, consumers, and manufacturers, would be best served if all BP measuring devices were assessed for accuracy according to an agreed single validation protocol that had global acceptance. Therefore, an international initiative was taken by the AAMI, ESH, and ISO experts who agreed to develop a universal standard for device validation. This statement presents the key aspects of a validation procedure, which were agreed by the AAMI, ESH, and ISO representatives as the basis for a single universal validation protocol. As soon as the AAMI/ESH/ISO standard is fully developed, this will be regarded as the single universal standard and will replace all other previous standards/protocols. © 2018 American Heart Association, Inc., and Wolters Kluwer Health, Inc.

A new approach in the development of quality management systems for (micro)electronics

NASA Astrophysics Data System (ADS)

Bacivarov, Ioan C.; Bacivarov, Angelica; Gherghina, Cǎtǎlina

2016-12-01

This paper presents the new approach in the analysis of the Quality Management Systems (QMS) of companies, based on the revised standard ISO 9001:2015. In the first part of the paper, QMS based on ISO 9001 certification are introduced; the changes and the updates proposed for the new version of ISO 9001:2015 are critically analyzed, based on the documents elaborated by ISO/TC 176. The approach based on ISO 9001:2015 could be considered as "beginning of a new era in development of quality management systems". A comparison between the between the "old" standard ISO 9001:2008 and the "new" standard ISO 9001:2015 is made. In the second part of the paper, steps to be followed in a company to implement this new standard are presented. A peculiar attention is given to the new concept of risk-based thinking in order to support and improve application of the process based approach. The authors conclude that, by considering risk throughout the organization the likelihood of achieving stated objectives is improved, output is more consistent and customers can be confident that they will receive the expected results. Finally, the benefits of the new approach in the development of quality management systems are outlined, as well as how they are reflected in the management of companies in general and those in electronics field, in particular. As demonstrated in this paper, well understood and properly applied, the new approach based on the revised standard ISO9001:2015 could offer a better quality management for companies operating in electronics and beyond.

Synergistic relationships between Analytical Chemistry and written standards.

PubMed

Valcárcel, Miguel; Lucena, Rafael

2013-07-25

This paper describes the mutual impact of Analytical Chemistry and several international written standards (norms and guides) related to knowledge management (CEN-CWA 14924:2004), social responsibility (ISO 26000:2010), management of occupational health and safety (OHSAS 18001/2), environmental management (ISO 14001:2004), quality management systems (ISO 9001:2008) and requirements of the competence of testing and calibration laboratories (ISO 17025:2004). The intensity of this impact, based on a two-way influence, is quite different depending on the standard considered. In any case, a new and fruitful approach to Analytical Chemistry based on these relationships can be derived. Copyright © 2013 Elsevier B.V. All rights reserved.

[ISO 15189 accreditation in clinical microbiology laboratory: general concepts and the status in our laboratory].

PubMed

Akyar, Işin

2009-10-01

One important trend in the laboratory profession and quality management is the global convergence of laboratory operations. The goal of an accredited medical laboratory is to continue "offering useful laboratory service for diagnosis and treatment of the patients and also aid to the health of the nation". An accredited clinical laboratory is managed by a quality control system, it is competent technically and the laboratory service meets the needs of all its patients and physicians by taking the responsibility of all the medical tests and therapies. For this purpose, ISO 15189 international standard has been prepared by 2003. ISO 15189 standard is originated from the arrangement of ISO 17025 and ISO 9001:2000 standards. Many countries such as England, Germany, France, Canada and Australia have preferred ISO 15189 as their own laboratory accreditation programme, meeting all the requirements of their medical laboratories. The accreditation performance of a clinical microbiology laboratory is mainly based on five essential points; preanalytical, analytical, postanalytical, quality control programmes (internal, external, interlaboratory) and audits (internal, external). In this review article, general concepts on ISO 15189 accreditation standards for the clinical microbiology laboratories have been summarized and the status of a private laboratory (Acibadem LabMed, Istanbul) in Turkey has been discussed.

Critical features of an auditable management system for an ISO 9000-compatible occupational health and safety standard.

PubMed

Levine, S; Dyjack, D T

1997-04-01

An International Organization for Standardization (ISO) 9001: 1994-harmonized occupational health and safety (OHS) management system has been written at the University of Michigan, and reviewed, revised, and accepted under the direction of the American Industrial Hygiene Association (AIHA) Occupational Health and Safety Management Systems (OHSMS) Task Force and the Board of Directors. This system is easily adaptable to the ISO 14001 format and to both OHS and environmental management system applications. As was the case with ISO 9001: 1994, this system is expected to be compatible with current production quality and OHS quality systems and standards, have forward compatibility for new applications, and forward flexibility, with new features added as needed. Since ISO 9001: 1987 and 9001: 1994 have been applied worldwide, the incorporation of harmonized OHS and environmental management system components should be acceptable to business units already performing first-party (self-) auditing, and second-party (contract qualification) auditing. This article explains the basis of this OHS management system, its relationship to ISO 9001 and 14001 standards, the philosophy and methodology of an ISO-harmonized system audit, the relationship of these systems to traditional OHS audit systems, and the authors' vision of the future for application of such systems.

[Accreditation of medical laboratories].

PubMed

Horváth, Andrea Rita; Ring, Rózsa; Fehér, Miklós; Mikó, Tivadar

2003-07-27

In Hungary, the National Accreditation Body was established by government in 1995 as an independent, non-profit organization, and has exclusive rights to accredit, amongst others, medical laboratories. The National Accreditation Body has two Specialist Advisory Committees in the health care sector. One is the Health Care Specialist Advisory Committee that accredits certifying bodies, which deal with certification of hospitals. The other Specialist Advisory Committee for Medical Laboratories is directly involved in accrediting medical laboratory services of health care institutions. The Specialist Advisory Committee for Medical Laboratories is a multidisciplinary peer review group of experts from all disciplines of in vitro diagnostics, i.e. laboratory medicine, microbiology, histopathology and blood banking. At present, the only published International Standard applicable to laboratories is ISO/IEC 17025:1999. Work has been in progress on the official approval of the new ISO 15189 standard, specific to medical laboratories. Until the official approval of the International Standard ISO 15189, as accreditation standard, the Hungarian National Accreditation Body has decided to progress with accreditation by formulating explanatory notes to the ISO/IEC 17025:1999 document, using ISO/FDIS 15189:2000, the European EC4 criteria and CPA (UK) Ltd accreditation standards as guidelines. This harmonized guideline provides 'explanations' that facilitate the application of ISO/IEC 17025:1999 to medical laboratories, and can be used as a checklist for the verification of compliance during the onsite assessment of the laboratory. The harmonized guideline adapted the process model of ISO 9001:2000 to rearrange the main clauses of ISO/IEC 17025:1999. This rearrangement does not only make the guideline compliant with ISO 9001:2000 but also improves understanding for those working in medical laboratories, and facilitates the training and education of laboratory staff. With the official acceptance of ISO 15189 the clauses of this harmonized guideline fulfill the requirements of the new international standard as well. Accreditation of medical laboratories in Hungary may not only facilitate quality improvement of laboratory services, but also the development of a quality-based purchasing and reimbursement policy of the health insurance fund.

KSC Center Director Bridges accepts an ISO 9001 certificate from DNV

NASA Technical Reports Server (NTRS)

1998-01-01

Center Director Roy Bridges displays the ISO 9001 certificate he was awarded by Det Norske Veritas (DNV), Inc., an international ISO certification organization, at a ceremony at KSC. Dalton Lyon of DNV made the presentation, which included a 2000th ISO Certificate Plaque. ISO 9001 comprises the most detailed, comprehensive set of standard requirements for quality programs established by the International Standards Organization. The presentation followed a successful independent audit by DNV of the KSC Management System in May of this year. The third-party auditors examined about 20 elements of KSC's system, including management responsibility, design control, documentation, test and inspection, and corrective action procedures. DNV found that KSC met or exceeded the stringent quality standards in all areas. KSC will use this certification as a tool to improve an already world-class team. All NASA centers are required by NASA Administrator Daniel S. Goldin to be ISO 9001 registered by September 1999. NASA is the first federal agency to seek the quality certification.

CMMI(Registered) for Services, Version 1.3

DTIC Science & Technology

2010-11-01

ISO 2008b] ISO /IEC 27001 :2005 Information technology – Security techniques – Information Security Management Systems – Requirements [ ISO /IEC 2005...Commission. ISO /IEC 27001 Information Technology – Security Techniques – Information Security Management Systems – Requirements, 2005. http...CMM or International Organization for Standardization ( ISO ) 9001, you will immediately recognize many similarities in their structure and content

Implementing the DoD Joint Operation Planning Process for Private Industry Enterprise Security

DTIC Science & Technology

2011-09-01

Standards Organization’s ( ISO ) ISO 27001 ( ISO 27002 defines the controls), and the IT Service Management Forum’s Information Technology Infrastructure...27001 certification. 24 Alberto Bastos and Rosangela Caubit, ISO 27001 and 27002 : Information...includes: 90,000 records lost from Booz Allen Hamilton; 90,000,000 26 ISO /IEC 27002 , 19 December

Putting ISO 9000 Standards and Baldrige Quality Criteria To Work Now in Public Education.

ERIC Educational Resources Information Center

Clark, Don

1999-01-01

The National Association for Industry-Education Cooperation (NAIEC) creates an approach for school system improvement that combines the necessary standards for achieving mileposts of the Baldrige Quality Criteria and the International Organization of Standardization (ISO) 9000 Standards for Education. Together, the Baldrige Criteria and ISO…

49 CFR 173.121 - Class 3-Assignment of packing group.

Code of Federal Regulations, 2011 CFR

2011-10-01

... packing group must be determined by applying the following criteria: Flash point (closed-cup) Initial... (73.4 °F) using the ISO standard cup with a 4 mm (0.16 inch) jet as set forth in ISO 2431 (IBR, see... using the ISO standard cup with a 6 mm (0.24 inch) jet. (ii) Solvent Separation Test. This test is...

Application of ISO 9000 Standards to Education and Training. Interpretation and Guidelines in a European Perspective. CEDEFOP Document.

ERIC Educational Resources Information Center

Van den Berghe, Wouter

This report brings together European experience on the interpretation and implementation of ISO 9000 in education and training (ET) environments. Chapter 1 discusses the importance of quality concepts in ET and summarizes key concepts of total quality management (TQM) and its relevance for ET. Chapter 2 introduces the ISO 9000 standards. It…

Audit and Certification Process for Science Data Digital Repositories

NASA Astrophysics Data System (ADS)

Hughes, J. S.; Giaretta, D.; Ambacher, B.; Ashley, K.; Conrad, M.; Downs, R. R.; Garrett, J.; Guercio, M.; Lambert, S.; Longstreth, T.; Sawyer, D. M.; Sierman, B.; Tibbo, H.; Waltz, M.

2011-12-01

Science data digital repositories are entrusted to ensure that a science community's data are available and useful to users both today and in the future. Part of the challenge in meeting this responsibility is identifying the standards, policies and procedures required to accomplish effective data preservation. Subsequently a repository should be evaluated on whether or not they are effective in their data preservation efforts. This poster will outline the process by which digital repositories are being formally evaluated in terms of their ability to preserve the digitally encoded information with which they have been entrusted. The ISO standards on which this is based will be identified and the relationship of these standards to the Open Archive Information System (OAIS) reference model will be shown. Six test audits have been conducted with three repositories in Europe and three in the USA. Some of the major lessons learned from these test audits will be briefly described. An assessment of the possible impact of this type of audit and certification on the practice of preserving digital information will also be provided.

Applying and extending ISO/TC42 digital camera resolution standards to mobile imaging products

NASA Astrophysics Data System (ADS)

Williams, Don; Burns, Peter D.

2007-01-01

There are no fundamental differences between today's mobile telephone cameras and consumer digital still cameras that suggest many existing ISO imaging performance standards do not apply. To the extent that they have lenses, color filter arrays, detectors, apertures, image processing, and are hand held, there really are no operational or architectural differences. Despite this, there are currently differences in the levels of imaging performance. These are driven by physical and economic constraints, and image-capture conditions. Several ISO standards for resolution, well established for digital consumer digital cameras, require care when applied to the current generation of cell phone cameras. In particular, accommodation of optical flare, shading non-uniformity and distortion are recommended. We offer proposals for the application of existing ISO imaging resolution performance standards to mobile imaging products, and suggestions for extending performance standards to the characteristic behavior of camera phones.

Axial Tension Testing Forged Horizontal Connectors for Use with Intermodal ISO (International Organization for Standardization) Containers

DTIC Science & Technology

1985-09-01

Standardization (ISO). Horizontal connectors are used to couple these containers for shipping by sea, highway, or rail . To determine whether a certain...capacity rating of 50,000 pounds. The Marine Corps requirement is 48,000 pounds (page 69 of Ref 3). Longitudinal restraint in the rail mode is the...the standard 96 inches. The quad will be certified in the marine, highway, and rail modes of transportation in accordance with ISO 1496/1-1978(E) (Ref 4

Naval Open Architecture Contract Guidebook for Program Managers

DTIC Science & Technology

2010-06-30

a whole, transform inputs into outputs. [IEEE/EIA Std. 12207 /1997] “APP233/ ISO 10303” – APP233 an “Application Protocol” for Systems Engineering...Language Metadata Interchange (XMI) and AP233/ ISO 10303). The contractor shall identify the proposed standards and formats to be used. The contractor...ANSI ISO /IEC 9075-1, ISO /IEC 9075-2, ISO /IEC 9075-3, ISO /IEC 9075-4, ISO /IEC 9075-5) 2. HTML for presentation layer (e.g., XML 1.0

Analysis of Implementing Lifetime Energy Cost, Including Fully Burdened Cost of Fuel and Energy Footprints of Contractors, as Mandatory Decision Factors in Navy Acquisition

DTIC Science & Technology

2010-06-01

7 Table 2. ISO 14001 versus ISO 50001 (From: Integrated Renewable Energy , 2010...the ISO is expected to release ISO 50001 , Management System for Energy (MSE) at the end of 2010 (Pinero, 2009, pp. 18–22). Standard 50001 is based...35 Table 2. ISO 14001 versus ISO 50001 (From: Integrated Renewable Energy , 2010) 36 ISO 50001 will focus a company’s attention on

Assessing the Value of Regulation Resources Based on Their Time Response Characteristics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Makarov, Yuri V.; Lu, Shuai; Ma, Jian

2008-06-01

Fast responsive regulation resources are potentially more valuable as a power system regulation resource (more efficient) because they allow applying controls at the exact moment and in the exact amount as needed. Faster control is desirable because it facilitates more reliable compliance with the NERC Control Performance Standards at relatively lesser regulation capacity procurements. The current California ISO practices and markets do not provide a differentiation among the regulation resources based on their speed of response (with the exception of some minimum ramping capabilities). Some demand response technologies, including some generation and energy storage resources, can provide quicker control actions.more » California ISO practices and markets could be updated to welcome more fast regulation resources into the California ISO service area. The project work reported in this work was pursuing the following objectives: • Develop methodology to assess the relative value of generation resources used for regulation and load following California ISO functions • This assessment should be done based on physical characteristics including the ability to quickly change their output following California ISO signals • Evaluate what power is worth on different time scales • Analyze the benefits of new regulation resources to provide effective compliance with the mandatory NERC Control Performance Standards • Evaluate impacts of the newly proposed BAAL and FRR standards on the potential value of fast regulation and distributed regulation resources • Develop a scope for the follow-up projects to pave a road for the new efficient types of balancing resources in California. The work included the following studies: • Analysis of California ISO regulating units characteristics • California ISO automatic generation system (AGC) analysis • California ISO regulation procurement and market analysis • Fast regulation efficiency analysis • Projection of the California ISO load following and regulation requirements into the future • Value of fast responsive resources depending on their ramping capability • Potential impacts of the balancing authority area control error limit (BAAL), which is a part of the newly proposed NERC standard “Balancing Resources and Demand” • Potential impacts of the Western Electricity Coordinating Council (WECC) frequency responsive reserve (FRR) standard • Recommendations for the next phase of the project. The following main conclusions and suggestions for the future have been made: • The analysis of regulation ramping requirements shows that the regulation system should be able to provide ramps of at least 40-60 MW per minute for a period up to 6 minutes. • Evaluate if changes are needed in the California ISO AGC system to effectively accommodate new types of fast regulation resources and minimize the California ISO regulation procurement. • California ISO may consider creating better market opportunities for and incentives for fast responsive resources. • An additional study of low probability high ramp events can be recommended to the California ISO. • The California ISO may be willing to consider establishing a more relaxed target CPS2 compliance level. • A BAAL-related study can be recommended for the California ISO as soon as more clarity is achieved concerning the actual enforcement of the BAAL standard and its numerical values for the California ISO. The study may involve an assessment of advantages of the distributed frequency-based control for the California ISO system. The market-related issues that arise in this connection can be also investigated. • A FRR-related study can be recommended for the California ISO as soon as more clarity is achieved concerning the actual enforcement of the FRR standard and its numerical values for the California ISO.« less

Accreditation - ISO/IEC 17025

NASA Astrophysics Data System (ADS)

Kaus, Rüdiger

This chapter gives the background on the accreditation of testing and calibration laboratories according to ISO/IEC 17025 and sets out the requirements of this international standard. ISO 15189 describes similar requirements especially tailored for medical laboratories. Because of these similarities ISO 15189 is not separately mentioned throughout this lecture.

Framework for establishing records control in hospitals as an ISO 9001 requirement.

PubMed

Al-Qatawneh, Lina

2017-02-13

Purpose The purpose of this paper is to present the process followed to control records in a Jordanian private community hospital as an ISO 9001:2008 standard requirement. Design/methodology/approach Under the hospital quality council's supervision, the quality management and development office staff were responsible for designing, planning and implementing the quality management system (QMS) using the ISO 9001:2008 standard. A policy for records control was established. An action plan for establishing the records control was developed and implemented. On completion, a coding system for records was specified to be used by hospital staff. Finally, an internal audit was performed to verify conformity to the ISO 9001:2008 standard requirements. Findings Successful certification by a neutral body ascertained that the hospital's QMS conformed to the ISO 9001:2008 requirements. A framework was developed that describes the records controlling process, which can be used by staff in any healthcare organization wanting to achieve ISO 9001:2008 accreditation. Originality/value Given the increased interest among healthcare organizations to achieve the ISO 9001 certification, the proposed framework for establishing records control is developed and is expected to be a valuable management tool to improve and sustain healthcare quality.

Measuring Operational Resilience Using the CERT(Registered) Resilience Management Model

DTIC Science & Technology

2010-09-01

such as ISO 27002 [ ISO 2005]) and then measure the implementation and performance of practices contained in the standard. This checklist-based ap...Security techniques – Code of practice for information security management. ISO /IEC 27002 :2005, June 2005. Also known as ISO /IEC 17799:2005. [ ISO 2007...Table 23: ISO 15939 Process Activities and Tasks 54 Table 24: CERT-RMM Measurement and Analysis Process Area Goals and Practices 55 CMU/SEI

Implementation of the OECD principles of good laboratory practice in test facilities complying with a quality system accredited to the ISO/IEC 17025 standard.

PubMed

Feller, Etty

2008-01-01

Laboratories with a quality system accredited to the ISO/IEC 17025 standard have a definite advantage, compared to non-accredited laboratories, when preparing their facilities for the implementation of the principles of good laboratory practice (GLP) of the Organisation for Economic Co-operation and Development (OECD). Accredited laboratories have an established quality system covering the administrative and technical issues specified in the standard. The similarities and differences between the ISO/IEC 17025 standard and the OECD principles of GLP are compared and discussed.

ISO 15859 Propellant and Fluid Specifications: A Review and Comparison with Military and NASA Specifications

NASA Technical Reports Server (NTRS)

Greene, Ben; McClure, Mark B.; Baker, David L.

2006-01-01

This work presents an overview of the International Organization for Standardization (ISO) 15859 International Standard for Space Systems Fluid Characteristics, Sampling and Test Methods Parts 1 through 13 issued in June 2004. These standards establish requirements for fluid characteristics, sampling, and test methods for 13 fluids of concern to the propellant community and propellant characterization laboratories: oxygen, hydrogen, nitrogen, helium, nitrogen tetroxide, monomethylhydrazine, hydrazine, kerosene, argon, water, ammonia, carbon dioxide, and breathing air. A comparison of the fluid characteristics, sampling, and test methods required by the ISO standards to the current military and NASA specifications, which are in use at NASA facilities and elsewhere, is presented. Many ISO standards composition limits and other content agree with those found in the applicable parts of NASA SE-S-0073, NASA SSP 30573, military performance standards and details, and Compressed Gas Association (CGA) commodity specifications. The status of a current project managed at NASA Johnson Space Center White Sands Test Facility (WSTF) to rewrite these documents is discussed.

Metadata for WIS and WIGOS: GAW Profile of ISO19115 and Draft WIGOS Core Metadata Standard

NASA Astrophysics Data System (ADS)

Klausen, Jörg; Howe, Brian

2014-05-01

The World Meteorological Organization (WMO) Integrated Global Observing System (WIGOS) is a key WMO priority to underpin all WMO Programs and new initiatives such as the Global Framework for Climate Services (GFCS). The development of the WIGOS Operational Information Resource (WIR) is central to the WIGOS Framework Implementation Plan (WIGOS-IP). The WIR shall provide information on WIGOS and its observing components, as well as requirements of WMO application areas. An important aspect is the description of the observational capabilities by way of structured metadata. The Global Atmosphere Watch is the WMO program addressing the chemical composition and selected physical properties of the atmosphere. Observational data are collected and archived by GAW World Data Centres (WDCs) and related data centres. The Task Team on GAW WDCs (ET-WDC) have developed a profile of the ISO19115 metadata standard that is compliant with the WMO Information System (WIS) specification for the WMO Core Metadata Profile v1.3. This profile is intended to harmonize certain aspects of the documentation of observations as well as the interoperability of the WDCs. The Inter-Commission-Group on WIGOS (ICG-WIGOS) has established the Task Team on WIGOS Metadata (TT-WMD) with representation of all WMO Technical Commissions and the objective to define the WIGOS Core Metadata. The result of this effort is a draft semantic standard comprising of a set of metadata classes that are considered to be of critical importance for the interpretation of observations relevant to WIGOS. The purpose of the presentation is to acquaint the audience with the standard and to solicit informal feed-back from experts in the various disciplines of meteorology and climatology. This feed-back will help ET-WDC and TT-WMD to refine the GAW metadata profile and the draft WIGOS metadata standard, thereby increasing their utility and acceptance.

Maximizing your Process Improvement ROI through Harmonization

DTIC Science & Technology

2008-03-01

ISO 12207 ) provide comprehensive guidance on what system and software engineering processes are needed. The frameworks of Six Sigma provide specific...reductions. Their veloci-Q Enterprise integrated system, includes ISO 9001, CMM, P-CMM, TL9000, British Standard 7799, and Six Sigma. They estimate a 30...at their discretion. And, they chose to blend process maturity models and ISO standards to support their objective regarding the establishment of

ISO Standards Update

EPA Science Inventory

This presentation provides a brief update on activities of ISO (International Organization for Standardization) TC (Technical Committee) 285, Clean Cooking Solutions. Slides include information on: (1) Working Group project status updates, (2) background on laboratory and field ...

FREIGHT CONTAINER LIFTING STANDARD

DOE Office of Scientific and Technical Information (OSTI.GOV)

POWERS DJ; SCOTT MA; MACKEY TC

2010-01-13

This standard details the correct methods of lifting and handling Series 1 freight containers following ISO-3874 and ISO-1496. The changes within RPP-40736 will allow better reading comprehension, as well as correcting editorial errors.

Contact lens disinfecting solutions antibacterial efficacy: comparison between clinical isolates and the standard ISO ATCC strains of Pseudomonas aeruginosa and Staphylococcus aureus.

PubMed

Mohammadinia, M; Rahmani, S; Eslami, G; Ghassemi-Broumand, M; Aghazadh Amiri, M; Aghaie, Gh; Tabatabaee, S M; Taheri, S; Behgozin, A

2012-02-01

To evaluate the disinfectant properties of the three multipurpose contact lens disinfecting solutions available in Iran, against clinical isolates and the standard ISO ATCC strains of Pseudomonas aeruginosa and Staphylococcus aureus, based on the international organization for standardization (ISO) 14729 guidelines. Three multipurpose solutions that were tested were ReNu Multiplus, Solo Care Aqua and All-Clean Soft. The test solutions were challenged with clinical isolates and the standard strains of P. aeruginosa(ATCC 9027) and S. aureus(ATCC 6538), based on the ISO Stand-alone procedure for disinfecting products. Solutions were sampled for surviving microorganisms at manufacturer's minimum recommended disinfection time. The number of viable organisms was determined and log reductions calculated. All of the three test solutions in this study provided a reduction greater than the required mean 3.0 logarithmic reduction against the recommended standard ATCC strains of P. aeruginosa and S. aureus. Antibacterial effectiveness of Solo Care Aqua and All-Clean Soft against clinical isolates of P. aeruginosa and S. aureus were acceptable based on ISO 14729 Stand-alone test. ReNu MultiPlus showed a minimum acceptable efficacy against the clinical isolate of S. aureus, but did not reduce the clinical isolate by the same amount. Although the contact lens disinfecting solutions meet/exceed the ISO 14729 Stand-alone primary acceptance criteria for standard strains of P. aeruginosa and S. aureus, their efficacy may be insufficient against clinical isolates of these organisms.

Contact lens disinfecting solutions antibacterial efficacy: comparison between clinical isolates and the standard ISO ATCC strains of Pseudomonas aeruginosa and Staphylococcus aureus

PubMed Central

Mohammadinia, M; Rahmani, S; Eslami, G; Ghassemi-Broumand, M; Aghazadh Amiri, M; Aghaie, Gh; Tabatabaee, S M; Taheri, S; Behgozin, A

2012-01-01

Purpose To evaluate the disinfectant properties of the three multipurpose contact lens disinfecting solutions available in Iran, against clinical isolates and the standard ISO ATCC strains of Pseudomonas aeruginosaand Staphylococcus aureus, based on the international organization for standardization (ISO) 14729 guidelines. Methods Three multipurpose solutions that were tested were ReNu Multiplus, Solo Care Aqua and All-Clean Soft. The test solutions were challenged with clinical isolates and the standard strains of P. aeruginosa(ATCC 9027) and S. aureus(ATCC 6538), based on the ISO Stand-alone procedure for disinfecting products. Solutions were sampled for surviving microorganisms at manufacturer's minimum recommended disinfection time. The number of viable organisms was determined and log reductions calculated. Results All of the three test solutions in this study provided a reduction greater than the required mean 3.0 logarithmic reduction against the recommended standard ATCC strains of P. aeruginosaand S. aureus. Antibacterial effectiveness of Solo Care Aqua and All-Clean Soft against clinical isolates of P. aeruginosaand S. aureuswere acceptable based on ISO 14729 Stand-alone test. ReNu MultiPlus showed a minimum acceptable efficacy against the clinical isolate of S. aureus, but did not reduce the clinical isolate by the same amount. Conclusions Although the contact lens disinfecting solutions meet/exceed the ISO 14729 Stand-alone primary acceptance criteria for standard strains of P. aeruginosaand S. aureus, their efficacy may be insufficient against clinical isolates of these organisms. PMID:22094301

Research and analysis on new test lenses for calibration of focimeters used for measuring contact lenses

NASA Astrophysics Data System (ADS)

Zhang, Jiyan; Wang, Liru; Ma, Zhenya

2006-11-01

A focimeter is one of the basic ophthalmic instruments used in every optometric practice, and verification of the accuracy and calibration of the instrument are of the utmost importance. For many years the International Standardization for Organization requires that calibrations for all kinds of focimeters shall be accomplished by using test lenses described in ISO 9342:1996. These test lenses must be of high quality and of nominal back vertex power that is known with high accuracy. With the development of science and technology, ISO 9342 was revised in 2005. A new part ISO 9342-2 had been drafted for test lenses used to calibrate focimeters with contact lens measurement, and the original ISO 9342 was turned into the current ISO 9342-1, which could only be used to calibrate fociemters with spectacle lens measurement. As one of the standard drafters, the background for the newly published ISO 9342-2 is introduced in this study, and comparison between test lenses of ISO 9342-1 and ISO 9342-2 is made. Further, the influence of tolerance and uncertainty in design and production of standard test lenses of ISO 9342-2 is analyzed. The paraxial approximation is used to relate the lens parameters with back vertex power and to calculate the uncertainty budget. Moreover, one set of test lenses conforming to ISO 9342-2 is manufactured and experiments are done with it. Results show that test lenses described in ISO 9342-2 can correct the measurement errors of focimeters used for measuring contact lenses well, especially for spherical aberration, and the correction is more effective for spherical contact lenses with high back vertex power.

NASA's Earth Observing System Data and Information System - Many Mechanisms for On-Going Evolution

NASA Astrophysics Data System (ADS)

Ramapriyan, H. K.

2012-12-01

NASA's Earth Observing System Data and Information System has been serving a broad user community since August 1994. As a long-lived multi-mission system serving multiple scientific disciplines and a diverse user community, EOSDIS has been evolving continuously. It has had and continues to have many forms of community input to help with this evolution. Early in its history, it had inputs from the EOSDIS Advisory Panel, benefited from the reviews by various external committees and evolved into the present distributed architecture with discipline-based Distributed Active Archive Centers (DAACs), Science Investigator-led Processing Systems and a cross-DAAC search and data access capability. EOSDIS evolution has been helped by advances in computer technology, moving from an initially planned supercomputing environment to SGI workstations to Linux Clusters for computation and from near-line archives of robotic silos with tape cassettes to RAID-disk-based on-line archives for storage. The network capacities have increased steadily over the years making delivery of data on media almost obsolete. The advances in information systems technologies have been having an even greater impact on the evolution of EOSDIS. In the early days, the advent of the World Wide Web came as a game-changer in the operation of EOSDIS. The metadata model developed for the EOSDIS Core System for representing metadata from EOS standard data products has had an influence on the Federal Geographic Data Committee's metadata content standard and the ISO metadata standards. The influence works both ways. As ISO 19115 metadata standard has developed in recent years, EOSDIS is reviewing its metadata to ensure compliance with the standard. Improvements have been made in the cross-DAAC search and access of data using the centralized metadata clearing house (EOS Clearing House - ECHO) and the client Reverb. Given the diversity of the Earth science disciplines served by the DAACs, the DAACs have developed a number of software tools tailored to their respective user communities. Web services play an important part in improved access to data products including some basic analysis and visualization capabilities. A coherent view into all capabilities available from EOSDIS is evolving through the "Coherent Web" effort. Data are being made available in near real-time for scientific research as well as time-critical applications. On-going community inputs for infusion for maintaining vitality of EOSDIS come from technology developments by NASA-sponsored community data system programs - Advancing Collaborative Connections for Earth System Science (ACCESS), Making Earth System Data Records for Use in Research Environments (MEaSUREs) and Applied Information System Technology (AIST), as well as participation in Earth Science Data System Working Groups, the Earth Science Information Partners Federation and other interagency/international activities. An important source of community needs is the annual American Customer Satisfaction Index survey of EOSDIS users. Some of the key areas in which improvements are required and incremental progress is being made are: ease of discovery and access; cross-organizational interoperability; data inter-use; ease of collaboration; ease of citation of datasets; preservation of provenance and context and making them conveniently available to users.

Environmental management practices in the Lebanese pharmaceutical industries: implementation strategies and challenges.

PubMed

Massoud, May A; Makarem, N; Ramadan, W; Nakkash, R

2015-03-01

This research attempts to provide an understanding of the Lebanese pharmaceutical industries' environmental management strategies, priorities, and perceptions as well as drivers, barriers, and incentives regarding the implementation of the voluntary ISO 14001 Environmental Management System. Accordingly, a semistructured in-depth interview was conducted with the pharmaceutical industries. The findings revealed a significant lack of knowledge about the standard among the industries. The main perceived drivers for adopting the ISO 14001 are improving the companies' image and overcoming international trade. The main perceived barriers for acquiring the standard are the lack of government support and the fact that ISO 14001 is not being legally required or enforced by the government. Moreover, results revealed that adopting the ISO 14001 standard is not perceived as a priority for the Lebanese pharmaceutical industries. Although the cost of certification was not considered as a barrier for the implementation of ISO 14001, the majority of the pharmaceutical industries are neither interested nor willing to adopt the Standard if they are not exposed to any regulatory pressure or external demand. They are more concerned with quality and safety issues with the most adopted international standard among the industries being the ISO 9001 quality management system. This study highlights the aspect that financial barriers are not always the hurdles for implementing environmental management strategies in developing countries and underscores the need for regulatory frameworks and enforcement.

Information Model Translation to Support a Wider Science Community

NASA Astrophysics Data System (ADS)

Hughes, John S.; Crichton, Daniel; Ritschel, Bernd; Hardman, Sean; Joyner, Ronald

2014-05-01

The Planetary Data System (PDS), NASA's long-term archive for solar system exploration data, has just released PDS4, a modernization of the PDS architecture, data standards, and technical infrastructure. This next generation system positions the PDS to meet the demands of the coming decade, including big data, international cooperation, distributed nodes, and multiple ways of analysing and interpreting data. It also addresses three fundamental project goals: providing more efficient data delivery by data providers to the PDS, enabling a stable, long-term usable planetary science data archive, and enabling services for the data consumer to find, access, and use the data they require in contemporary data formats. The PDS4 information architecture is used to describe all PDS data using a common model. Captured in an ontology modeling tool it supports a hierarchy of data dictionaries built to the ISO/IEC 11179 standard and is designed to increase flexibility, enable complex searches at the product level, and to promote interoperability that facilitates data sharing both nationally and internationally. A PDS4 information architecture design requirement stipulates that the content of the information model must be translatable to external data definition languages such as XML Schema, XMI/XML, and RDF/XML. To support the semantic Web standards we are now in the process of mapping the contents into RDF/XML to support SPARQL capable databases. We are also building a terminological ontology to support virtually unified data retrieval and access. This paper will provide an overview of the PDS4 information architecture focusing on its domain information model and how the translation and mapping are being accomplished.

Role of standard documents in advancing the standardization of microfluidics connectors

NASA Astrophysics Data System (ADS)

Tantra, Ratna; van Heeren, Henne; Jarman, John

2016-04-01

An emerging trend within the microfluidic community is to standardize common parts in order to facilitate design and production activities. The goal is clear: to enhance interoperability and promote plug-and-play. A recent launch of a pan-European project, Microfluidic (MF) Manufacturing, has identified an item that is in immediate need of standardization: having in place geometrical specifications for MF connectors. In order to accelerate the adoption of such standards, there is a need to consider the pivotal role of standard documents. The purpose of this paper is to provide background information on document standards development. In addition, the future implications related to the MF manufacturing project will be discussed. A strengths, weaknesses, opportunities, and threats analysis has been carried out to identify points of action. The findings show that although there is a need to publish under International Organization for Standardization (ISO), the actual realization of a full ISO standard document is not feasible. The recommendation is to initially publish via an ISO Workshop Agreement. Parallel to such activity, there is a need to encourage stakeholders help kick start a currently dormant working group that supports microfluidics under ISO to help pave the way for future standardization activities in the microfluidics community.

ANSI-ASQ National Accreditation Board /ACLASS

DTIC Science & Technology

2011-03-28

unclassified c. THIS PAGE unclassified Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18  Laboratories – ISO / IEC 17025  Inspection...Bodies – ISO / IEC 17020  RMPs – ISO Guide 34 (Reference Materials)  PT Providers – ISO 17043  Product Certifiers – ISO Guide 65  Government...Programs: DoD ELAP, EPA Energy Star, CPSC Toy Safety, NRC, NIST IPV6, NLLAP, NEFAP  TRAINING Programs  Certification Bodies – ISO / IEC 17021

Protecting Privacy of Genomic Information.

PubMed

Delgado, Jaime; Llorente, Silvia; Naro, Daniel

2017-01-01

The ISO/IEC committee in charge of standardizing the well-known MPEG audiovisual standards has launched, in cooperation with the ISO committee on Biotechnology, a new activity for efficient compressed storage and transmission of genomic information. The paper presents proposals for adding privacy and security to such in-progress standards.

The Master Archive Collection Inventory (MACI)

NASA Astrophysics Data System (ADS)

Lief, C. J.; Arnfield, J.; Sprain, M.

2014-12-01

The Master Archive Collection Inventory (MACI) project at the NOAA National Climatic Data Center (NCDC) is an effort to re-inventory all digital holdings to streamline data set and product titles and update documentation to discovery level ISO 199115-2. Subject Matter Experts (SME) are being identified for each of the holdings and will be responsible for creating and maintaining metadata records. New user-friendly tools are available for the SMEs to easily create and update this documentation. Updated metadata will be available for retrieval by other aggregators and discovery tools, increasing the usability of NCDC data and products.

Promoting Strong ISO 50001 Outcomes with Supportive National Infrastructure

DOE Office of Scientific and Technical Information (OSTI.GOV)

McKane, Aimee, T.; Siciliano, Graziella; de los Reyes, Pamela

The ISO 50001 standard is a key mechanism for reducing greenhouse gas emissions and improving energy efficiency globally. An increasing number of companies are seeking certification, creating the need for personnel that are competent to conduct ISO 50001 certification audits. The growth of ISO 50001 is expected to accelerate as more companies integrate ISO 50001 into their corporate sustainability strategies and supplier requirements. Robust implementation of ISO 50001 represents an important tool for countries with climate change mitigation goals. Because of its dual focus on continual improvement of an organization’s energy management system (EnMS) and its energy performance improvement, ISOmore » 50001 requires skills of both implementers and certification auditors that are not well-supported by current credentials and training. This paper describes an effort to address skill gaps of certification auditors, a critical factor to ensure that ISO 50001 implementations are robust and result in continued energy performance improvement. A collaboration of governments through the Energy Management Working Group (EMWG), formerly under Global Superior Energy Performance (GSEP), has formed to build workforce capacity for ISO 50001 certification audits. The EMWG is leading the development of an internationally-relevant certification scheme for ISO 50001 Lead Auditor that meets requirements for ISO/IEC 17024 accreditation and ISO 50003 for defining ISO 50001 Lead Auditor competency. Wider availability of competent ISO 50001 Lead Auditors will ultimately increase the impact and market value of ISO 50001 certification and improve consistency of ISO 50001 certification outcomes by establishing a standardized and high level of knowledge and skills globally.« less

KSC Center Director Bridges accepts an ISO 9001 certification plaque from DNV

NASA Technical Reports Server (NTRS)

1998-01-01

Center Director Roy Bridges (right) displays the 2000th ISO Certificate Plaque he was given by Dalton Lyon (left) of Det Norske Veritas (DNV), Inc., an international ISO certification organization, at a ceremony at KSC. The plaque is a representation of the ISO 9001 certification awarded to KSC by DNV. ISO 9001 comprises the most detailed, comprehensive set of standard requirements for quality programs established by the International Standards Organization. The presentation followed a successful independent audit by DNV of the KSC Management System in May of this year. The third-party auditors examined about 20 elements of KSC's system, including management responsibility, design control, documentation, test and inspection, and corrective action procedures. DNV found that KSC met or exceeded the stringent quality standards in all areas. KSC will use this certification as a tool to improve an already world- class team. All NASA centers are required by NASA Administrator Daniel S. Goldin to be ISO 9001 registered by September 1999. NASA is the first federal agency to seek the quality certification.

Certification standards transfer: from committee to laboratory.

PubMed

Lehmann, H P

1998-12-01

The ISO 9000 Standards series were developed to provide the international manufacturing industry with a framework to ensure purchased products meet quality criteria. Section 4 of ISO 9001, Quality System Model for Quality Assurance in Design, Development, Production, Installation and Servicing, contains 20 aspects of a quality system that must be addressed by an organization in order to receive ISO 9001 certification. This concept is extended to the clinical laboratory, where a quality system program establishes for the customer (patient/clinician) that the purchased product (requested information on a submitted specimen-test result) meets established quality norms. In order to satisfy the customer, the providing organization must have policies and procedures in place that ensure a quality product, and be certified. To become certified the organization must, through an inspection process, demonstrate to an independent accrediting agency that it meets defined standards. In the United States, the government through the Clinical Laboratory Improvement Amendment (CLIA) 1988 established quality standards for the clinical laboratory. The College of American Pathologists (CAP), through its Laboratory Accreditation Program (LAP), serves as an independent agency that certifies that laboratories meet standards. To demonstrate the applicability of an established clinical laboratory accreditation program to ISO 9001 certification, the standards and checklists of CLIA 1988 and the CAP LAP will be examined to determine their conformance to ISO 9001, Section 4.

Workflows for ingest of research data into digital archives - tests with Archivematica

NASA Astrophysics Data System (ADS)

Kirchner, I.; Bertelmann, R.; Gebauer, P.; Hasler, T.; Hirt, M.; Klump, J. F.; Peters-Kotting, W.; Rusch, B.; Ulbricht, D.

2013-12-01

Publication of research data and future re-use of measured data require the long-term preservation of digital objects. The ISO OAIS reference model defines responsibilities for long-term preservation of digital objects and although there is software available to support preservation of digital data, there are still problems remaining to be solved. A key task in preservation is to make the datasets ready for ingest into the archive, which is called the creation of Submission Information Packages (SIPs) in the OAIS model. This includes the creation of appropriate preservation metadata. Scientists need to be trained to deal with different types of data and to heighten their awareness for quality metadata. Other problems arise during the assembly of SIPs and during ingest into the archive because file format validators may produce conflicting output for identical data files and these conflicts are difficult to resolve automatically. Also, validation and identification tools are notorious for their poor performance. In the project EWIG Zuse-Institute Berlin acts as an infrastructure facility, while the Institute for Meteorology at FU Berlin and the German research Centre for Geosciences GFZ act as two different data producers. The aim of the project is to develop workflows for the transfer of research data into digital archives and the future re-use of data from long-term archives with emphasis on data from the geosciences. The technical work is supplemented by interviews with data practitioners at several institutions to identify problems in digital preservation workflows and by the development of university teaching materials to train students in the curation of research data and metadata. The free and open-source software Archivematica [1] is used as digital preservation system. The creation and ingest of SIPs has to meet several archival standards and be compatible to the Metadata Encoding and Transmission Standard (METS). The two data producers use different software in their workflows to test the assembly of SIPs and ingest of SIPs into the archive. GFZ Potsdam uses a combination of eSciDoc [2], panMetaDocs [3], and bagit [4] to collect research data and assemble SIPs for ingest into Archivematica, while the Institute for Meteorology at FU Berlin evaluates a variety of software solutions to describe data and publications and to generate SIPs. [1] http://www.archivematica.org [2] http://www.escidoc.org [3] http://panmetadocs.sf.net [4] http://sourceforge.net/projects/loc-xferutils/

Introduction to ISO 15189: a blueprint for quality systems in veterinary laboratories.

PubMed

Freeman, Kathleen P; Bauer, Natali; Jensen, Asger L; Thoresen, Stein

2006-06-01

A trend in human and veterinary medical laboratory management is to achieve accreditation based on international standards. The International Organization for Standardization (ISO) 15189 standard is the first developed especially for accreditation of medical laboratories, and emphasizes the laboratory-client interface. European veterinary laboratories seeking to train candidates for the certification examination of the European College of Veterinary Clinical Pathology (ECVCP) require approval by the ECVCP Laboratory Standards Committee, which bases its evaluation in part on adherence to quality systems described in the ISO 15189 standards. The purpose of this article was to introduce the latest ISO quality standard and describe its application to veterinary laboratories in Europe, specifically as pertains to accreditation of laboratories involved in training veterinary clinical pathologists. Between 2003 and 2006, the Laboratory Standards Committee reviewed 12 applications from laboratories (3 commercial and 9 university) involved in training veterinary clinical pathologists. Applicants were asked to provide a description of the facilities for training and testing, current methodology and technology, health and safety policy, quality assurance policy (including internal quality control and participation in an external quality assurance program), written standard operating procedures (SOPs) and policies, a description of the laboratory information system, and personnel and training. Also during this time period multiple informal and formal discussions among ECVCP diplomates took place as to current practices and perceived areas of concern with regard to laboratory accreditation requirements. Areas in which improvement most often was needed in veterinary laboratories applying for ECVCP accreditation were the written quality plan, defined quality requirements for the tests performed, written SOPs and policies, training records, ongoing audits and competency assessments, and processes for identifying and addressing opportunities for improvement. Recommendations were developed for a stepwise approach towards achieving ISO 15189 standards, including 3 levels of quality components. The ISO 15189 standard provides a sound framework for veterinary laboratories aspiring to meet international quality standards.

Verification of the ISO calibration method for field pyranometers under tropical sky conditions

NASA Astrophysics Data System (ADS)

Janjai, Serm; Tohsing, Korntip; Pattarapanitchai, Somjet; Detkhon, Pasakorn

2017-02-01

Field pyranomters need to be annually calibrated and the International Organization for Standardization (ISO) has defined a standard method (ISO 9847) for calibrating these pyranometers. According to this standard method for outdoor calibration, the field pyranometers have to be compared to a reference pyranometer for the period of 2 to 14 days, depending on sky conditions. In this work, the ISO 9847 standard method was verified under tropical sky conditions. To verify the standard method, calibration of field pyranometers was conducted at a tropical site located in Nakhon Pathom (13.82o N, 100.04o E), Thailand under various sky conditions. The conditions of the sky were monitored by using a sky camera. The calibration results for different time periods used for the calibration under various sky conditions were analyzed. It was found that the calibration periods given by this standard method could be reduced without significant change in the final calibration result. In addition, recommendation and discussion on the use of this standard method in the tropics were also presented.

The standards process: X3 information processing systems

NASA Technical Reports Server (NTRS)

Emard, Jean-Paul

1993-01-01

The topics are presented in viewgraph form and include the following: International Organization for Standards (ISO); International Electrotechnical Committee (IEC); ISO/IEC Joint Technical Committee 1 (JTC-1); U.S. interface to JTC-1; ANSI; national organizations; U.S. standards development processes; national and international standards developing organizations; regional organizations; and X3 information processing systems.

Health and safety management systems: liability or asset?

PubMed

Bennett, David

2002-01-01

Health and safety management systems have a background in theory and in various interests among employers and workplace health and safety professionals. These have resulted in a number of national systems emanating from national standard-writing centres and from employers' organizations. In some cases these systems have been recognized as national standards. The contenders for an international standard have been the International Organization of Standardization (ISO) and the International Labour Organization (ILO). The quality and environmental management systems of ISO indicate what an ISO health and safety management standard would look like. The ILO Guidelines on Safety and Health Management Systems, by contrast, are stringent, specific and potentially effective in improving health and safety performance in the workplace.

Quality Management Systems in the Clinical Laboratories in Latin America

PubMed Central

2015-01-01

The implementation of management systems in accordance with standards like ISO 9001:2008 (1,2) in the clinical laboratories has conferred and added value of reliability and therefore a very significant input to patient safety. As we know the ISO 9001:2008 (1) a certification standard, and ISO 15189:2012 (2) an accreditation standard, both, at the time have generated institutional memory where they have been implemented, the transformation of culture focused on correct execution, control and following, evidence needed and the importance of register. PMID:27683495

Risk Management Considerations for Interoperable Acquisition

DTIC Science & Technology

2006-08-01

Electronics Engineers (IEEE) to harmonize the standards for software (IEEE 12207 ) and system (IEEE 15288) life-cycle processes. A goal of this harmonization...management ( ISO /IEC 16085) is being generalized to apply to the systems level. The revised, generalized standard will add require- ments and guidance for the...risk management. The documents include the following: • ISO /IEC Guide 73: Risk Management—Vocabulary—Guidelines for use in stan- dards [ ISO 02

Common Methods for Security Risk Analysis

DTIC Science & Technology

2005-01-12

recognized in the others. In Canada, three firms have been accredited as IT Security Evaluation and Testing (ITSET) Facility, under ISO / IEC 17025 -1999...harmonized security standards such as the Common Criteria and ISO 17799 may further increase the applicability of TRA approach. 3.4.8 MOST AUTOMATION...create something more suitable, the Common Criteria with Mutual Recognition Agreement (MRA) signed in October 1998. The CC became an ISO standard

Information Technology: Critical Infrastructure and Key Resources Sector-Specific Plan as Input to the National Infrastructure Protection Plan

DTIC Science & Technology

2007-05-01

services by implementing a disaster recovery plan to restore an organization’s critical business functions. (DRII 2004). ISO 27001 An information...the International Organization for Standardization ( ISO )), the IT SSP bases the terms and definitions on those in the NIPP because the SSP is an annex...International Organization for Standardization/International Electrotechnical Commission ( ISO /IEC) 27000 Series, Information technology—Security

78 FR 16044 - Hazardous Materials Packaging-Composite Cylinder Standards; Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-13

.... PHMSA-2013-0017; Notice No. 13-02] Hazardous Materials Packaging--Composite Cylinder Standards; Public..., marking, sale and use of non-DOT specification composite cylinders. The non-DOT specification cylinders... Organization (ISO) standards for composite cylinders ISO 11119 Parts - 1, -2, -3 incorporated by reference into...

The Technical Writer in the Global Marketplace.

ERIC Educational Resources Information Center

Ronayne, Deborah Washburn

The International Standards Organization (ISO) has developed standards to provide a uniform framework for quality assurance in organizations' products and services. Commonly referred to as ISO 9000, these standards focus on achieving and sustaining the quality of the product or service produced to continuously meet purchasers' needs, and give…

[Osaka Medical Laboratory ISO15189 Study Group: History and Future Prospects of the Group].

PubMed

Iguchi, Ken

2016-02-01

The IS015189 "Medical laboratories: Specific requirements regarding quality and competence" is an international standard issued by the International Organization for Standardization (ISO) in February 2003. In October 2004, pilot surveys were initiated in Japan prior to accreditation surveys scheduled to be started in 2005. In September 2005, the first ever ISO15189-accredited facility was established in Japan. With the background of limited information about and few opportunities to study ISO15189 in 2004, we established the Osaka Medical Laboratory ISO15189 Study Group as a unique association that anyone interested in the ISO is able to join. Approximately 900 people have participated in group meetings, which have been held a total of 11 times. Thus, our group has played a major role in ISO development in Japan. To date, approximately 100 facilities have been ISO15189-accredited in Japan, suggesting the need to take new steps regarding its accreditation. As our group has achieved our initial objective, we are planning to work towards taking new steps, such as interaction with accredited facilities.

Developing a Framework for Evaluating Organizational Information Assurance Metrics Programs

DTIC Science & Technology

2007-03-01

least cost.  Standards  such as  ISO /IEC 17799 and  ISO /IEC  27001  provide guidance on the domains that  security management should consider when... ISO /IEC 17799, 2000;  ISO /IEC  27001 ,  2005).        6    In order to attempt to find this optimal mix, organizations can make risk  decisions weighing...Electronic version].     International Organization of Standards.  (2000).   ISO /IEC  27001 .  Information  Technology Security Techniques:  Information

ISO9000 and the quality management system in the digital hospital.

PubMed

Liu, Yalan; Yao, Bin; Zhang, Zigang

2002-01-01

ISO9000 quality management system (ISO9000QMS) emphasize on the customer-oriented, managers' leadership and all staff's joining, adopt the process method and system management, spread the taking facts as a basis to make decision and improve consistently, and establish win-win relation with the suppliers. So, the digital hospital can adopt the ISO9000QMS. In order to establish the ISO9000QMS, the digital hospital should: (1) Design integrally, including analyzing the operation procedure, clarifying the job duties, setting up the spreading team and setting the quality policy and objectives: (2) Learning the ISO9000 quality standards; (3) Drawing up the documents, including the quality manual, program files and operation guiding files; (4) Training according the documents; (5) Executing the quality standard, including the service quality auditing, quality record auditing and quality system auditing; (6) Improving continually. With the establishment of ISO900QMS, the digital hospital can appraise more accurately, analyze quality matters statistically and avoid the interference of artificial factors.

46 CFR 162.017-1 - Incorporation by reference.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Standardization (ISO), Case postal 56, CH-1211 Geneva 20, Switzerland: (1) ISO 15364, Ships and Marine Technology—Pressure/Vacuum Valves for Cargo Tanks, First Edition (Sep. 1, 2000) (“ISO 15364”), 162.017-3; and (2...

46 CFR 162.017-1 - Incorporation by reference.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Standardization (ISO), Case postal 56, CH-1211 Geneva 20, Switzerland: (1) ISO 15364, Ships and Marine Technology—Pressure/Vacuum Valves for Cargo Tanks, First Edition (Sep. 1, 2000) (“ISO 15364”), 162.017-3; and (2...

Report of official foreign travel to France, June 7--20, 2000

DOE Office of Scientific and Technical Information (OSTI.GOV)

J.D. Mason

2000-07-11

The Department of Energy (DOE) has moved rapidly toward electronic production, management, and dissemination of scientific and technical information. The World-Wide Web (WWW) has become a primary means of information dissemination. Electronic commerce (EC) is becoming the preferred means of procurement. DOE, like other government agencies, depends on and encourages the use of international standards in data communications. Like most government agencies, DOE has expressed a preference for openly developed standards over proprietary designs promoted as ``standards'' by vendors. In particular, there is a preference for standards developed by organizations such as the International Organization for Standardization (ISO) and themore » American National Standards Institute (ANSI) that use open, public processes to develop their standards. Among the most widely adopted international standards is the Standard Generalized Markup Language (SGML, ISO 8879:1986, FIPS 152), to which DOE long ago made a commitment. Besides the official commitment, which has resulted in several specialized projects, DOE makes heavy use of coding derived from SGML: Most documents on the WWW are coded in HTML (Hypertext Markup Language), which is an application of SGML. The World-Wide Web Consortium (W3C), with the backing of major software houses like Adobe, IBM, Microsoft, Netscape, Oracle, and Sun, is promoting XML (eXtensible Markup Language), a class of SGML applications, for the future of the WWW and the basis for EC. In support of DOE's use of these standards, the authors has served since 1985 as Chairman of the international committee responsible for SGML and related standards, ISO/IEC JTC1/SC34 (SC34) and its predecessor organizations. During his June 2000 trip, he chaired the spring 2000 meeting of SC34 in Paris, France. He also attended a major conference on the use of SGML and XML and led a meeting of the International SGML/XML Users' Group (ISUG). In addition to the widespread use of the WWW among DOE's plants and facilities in Oak Ridge and among DOE sites across the nation, there are several SGML-based projects at the Oak Ridge Y-12 Plant. The local project team developed an SGML-based publications system that has been used for several major reports at the Y-12 Plant and Oak Ridge National Laboratory (ORNL). SGML is a component of the Weapons Records Archiving and Preservation (WRAP) project at the Y-12 Plant and is the format for catalog metadata chosen for weapons records by the Nuclear Weapons Information Group (NWIG). The Ferret system for automated classification analysis will use XML to structure its knowledge base. Supporting standards development allows DOE and the Y-12 plant the opportunity both to provide input into the process and to benefit from contact with some of the leading experts in the subject matter. Oak Ridge has been for some years the location to which other DOE sites turn for expertise in SGML and related topics.« less

Reduction of Noise from the J-52 and F-404 Jet Engines During Static Testing Using the Noise Attenuation Device (NAD)

DTIC Science & Technology

2009-06-01

Filters, Order 3, Type 0-C, Optional Range B.2.2 Sound Level Meter Calibration • ISO / IEC 17025 :2005 General requirements for the competence of...noise levels − NCSL -National Conference of Standards Laboratories − ISO - International Standards Organization − IEC - The International...testing and calibration laboratories • ISO 10012:2003 Measurement management systems -- Requirements for measurement processes and measuring

DOD ELAP Lab Uncertainties

DTIC Science & Technology

2012-03-01

ISO / IEC   17025  Inspection Bodies – ISO / IEC  17020  RMPs – ISO  Guide 34 (Reference...certify to :  ISO  9001 (QMS),  ISO  14001 (EMS),   TS 16949 (US Automotive)  etc. 2 3 DoD QSM 4.2 standard   ISO / IEC   17025 :2005  Each has uncertainty...IPV6, NLLAP, NEFAP  TRAINING Programs  Certification Bodies – ISO / IEC  17021  Accreditation for  Management System 

Usability evaluation of mobile applications using ISO 9241 and ISO 25062 standards.

PubMed

Moumane, Karima; Idri, Ali; Abran, Alain

2016-01-01

This paper presents an empirical study based on a set of measures to evaluate the usability of mobile applications running on different mobile operating systems, including Android, iOS and Symbian. The aim is to evaluate empirically a framework that we have developed on the use of the Software Quality Standard ISO 9126 in mobile environments, especially the usability characteristic. To do that, 32 users had participated in the experiment and we have used ISO 25062 and ISO 9241 standards for objective measures by working with two widely used mobile applications: Google Apps and Google Maps. The QUIS 7.0 questionnaire have been used to collect measures assessing the users' level of satisfaction when using these two mobile applications. By analyzing the results we highlighted a set of mobile usability issues that are related to the hardware as well as to the software and that need to be taken into account by designers and developers in order to improve the usability of mobile applications.

KSC-98pc907

NASA Image and Video Library

1998-08-11

Center Director Roy Bridges displays the ISO 9001 certificate he was awarded by Det Norske Veritas (DNV), Inc., an international ISO certification organization, at a ceremony at KSC. Dalton Lyon of DNV made the presentation, which included a 2000th ISO Certificate Plaque. ISO 9001 comprises the most detailed, comprehensive set of standard requirements for quality programs established by the International Standards Organization. The presentation followed a successful independent audit by DNV of the KSC Management System in May of this year. The third-party auditors examined about 20 elements of KSC's system, including management responsibility, design control, documentation, test and inspection, and corrective action procedures. DNV found that KSC met or exceeded the stringent quality standards in all areas. KSC will use this certification as a tool to improve an already world-class team. All NASA centers are required by NASA Administrator Daniel S. Goldin to be ISO 9001 registered by September 1999. NASA is the first federal agency to seek the quality certification

KSC-98pc908

NASA Image and Video Library

1998-08-11

Center Director Roy Bridges (right) displays the 2000th ISO Certificate Plaque he was given by Dalton Lyon (left) of Det Norske Veritas (DNV), Inc., an international ISO certification organization, at a ceremony at KSC. The plaque is a representation of the ISO 9001 certification awarded to KSC by DNV. ISO 9001 comprises the most detailed, comprehensive set of standard requirements for quality programs established by the International Standards Organization. The presentation followed a successful independent audit by DNV of the KSC Management System in May of this year. The third-party auditors examined about 20 elements of KSC's system, including management responsibility, design control, documentation, test and inspection, and corrective action procedures. DNV found that KSC met or exceeded the stringent quality standards in all areas. KSC will use this certification as a tool to improve an already worldclass team. All NASA centers are required by NASA Administrator Daniel S. Goldin to be ISO 9001 registered by September 1999. NASA is the first federal agency to seek the quality certification

Managing the Life Cycle Risks of Nanomaterials

DTIC Science & Technology

2009-07-01

ISO International Organization for Standardization ISN Institute for Soldier Nanotechnologies LCA Life Cycle Assessment LCCA Life Cycle Cost Analysis...similar to their smaller Existing ISO /TS 27687:2008 Nanotechnologies -- Terminology and definitions for nano-objects -- Nanoparticle, nanofibre and...Nanotechnology Under Development ISO /CD TR 80004-1 Nanotechnologies - Terminology and definitions – Framework ISO /AWI TS 80004-2 Nanotechnologies

ISO 9000 and Creativity: Potential Advantages of Implementing ISO in Community Colleges

ERIC Educational Resources Information Center

Alkeaid, Adel

2007-01-01

The purpose of this paper is to examine the relationship between the ISO 9000 standard and creativity. In this paper, the researcher tries to answer the following questions: Which learning theories best foster creative thought? Is creativity more behaviorist or constructivist? Where does ISO 9000 fit in the continuum from behaviorism to…

The Relationship between the Training Function and ISO-9000 Registration.

ERIC Educational Resources Information Center

Maxwell, Randy C.; Jost, Karen L.

ISO 9000 is one of a series of international standards providing guidelines and governing quality of products and services. The ISO 9000 certification demonstrates the capability of a supplier to control the processes that determine the acceptability of the product or service being supplied. This paper focuses on the training aspects of ISO 9000…

Standardization of Laser Methods and Techniques for Vibration Measurements and Calibrations

NASA Astrophysics Data System (ADS)

von Martens, Hans-Jürgen

2010-05-01

The realization and dissemination of the SI units of motion quantities (vibration and shock) have been based on laser interferometer methods specified in international documentary standards. New and refined laser methods and techniques developed by national metrology institutes and by leading manufacturers in the past two decades have been swiftly specified as standard methods for inclusion into in the series ISO 16063 of international documentary standards. A survey of ISO Standards for the calibration of vibration and shock transducers demonstrates the extended ranges and improved accuracy (measurement uncertainty) of laser methods and techniques for vibration and shock measurements and calibrations. The first standard for the calibration of laser vibrometers by laser interferometry or by a reference accelerometer calibrated by laser interferometry (ISO 16063-41) is on the stage of a Draft International Standard (DIS) and may be issued by the end of 2010. The standard methods with refined techniques proved to achieve wider measurement ranges and smaller measurement uncertainties than that specified in the ISO Standards. The applicability of different standardized interferometer methods to vibrations at high frequencies was recently demonstrated up to 347 kHz (acceleration amplitudes up to 350 km/s2). The relative deviations between the amplitude measurement results of the different interferometer methods that were applied simultaneously, differed by less than 1% in all cases.

Report of Official Foreign Travel to France May 8-27, 1998

DOE Office of Scientific and Technical Information (OSTI.GOV)

mason, j d

1998-06-11

The Department of Energy (DOE) has moved ever more rapidly towards electronic production, management, and dissemination of scientific and technical information. The World-Wide Web (WWW) has become a primary means of information dissemination. Electronic commerce (EC) is becoming the preferred means of procurement. DOE, like other government agencies, depends on and encourages the use of international standards in data communications. Among the most widely adopted standards is the Standard Generalized Markup Language (SGML, ISO 8879:1986, FIPS 152), which DOE has selected as the basis of its electronic management of documents. Besides the official commitment, which has resulted in several specializedmore » projects, DOE makes heavy use of coding derived from SGML, and its use is likely to increase in the future. Most documents on the WWW are coded in HTML (Hypertext Markup Language), which is an application of SGML. The World-Wide Web Consortium (W3C), with the backing of major software houses like Microsoft, Adobe, and Netscape, is promoting XML (eXtensible Markup Language), a class of SGML applications, for the future of the WWW and the basis for EC. In support of DOE's use of these standards, I have served since 1985 as Convenor of the international committee responsible for SGML and related standards, ISO/IEC JTC1/WG4 (WG4). During this trip I convened the spring 1998 meeting of WG4 in Paris, France. I also attended a major conference on the use of SGML and XML. At the close of the conference, I chaired a workshop of standards developers looking at ways of improving online searching of electronic documents. Note: Since the end of the meetings in France, JTC1 has raised the level of WG4 to a full Subcommittee; its designator is now ISO/IEC JTC1/SC34. WG4 maintains and continues to enhance several standards. In addition to SGML, which is the basis of HTML and XML, WG4 also works on the Document Style Semantics and Specification Language (DSSSL), which is the basis for the W3C's XSL (eXtensible Style Language, to be used with XML) and the Hypermedia/Time-based Document Structuring Language (HyTime), which is a major influence on the W3C's XLink (XML Linking Language). WG4 is also involved in work with the ISO's TC184, Industrial Data, on the linking of STEP (the standard for the interchange of product model data) with SGML. In addition to the widespread use of the WWW among DOE's plants and facilities in Oak Ridge and among DOE sites across the nation, there are several SGML-based projects at the Y-12 Plant. My project team in Information Technology Services has developed an SGML-based publications system that has been used for several major reports at the Y-12 Plant and Oak Ridge National Laboratory (ORNL). SGML is a component of the Weapons Records Archiving and Preservation (WRAP) project at Y-12 and is the format for catalog metadata chosen for weapons records by the Nuclear Weapons Information Group (NWIG). Supporting standards development allows DOE and Y-12 both input into the process and the opportunity to benefit from contact with some of the leading experts in the subject matter. Oak Ridge has been for some years the location to which other DOE sites turn for expertise in SGML and related topics.« less

30 CFR 74.9 - Quality assurance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... registration under ISO Q9001-2000, American National Standard, Quality Management Systems-Requirements... ISO Q9001-2000, American National Standard, Quality Management Systems-Requirements. The Director of... management audits. Upon request, applicants or approval holders must allow NIOSH to inspect the quality...

30 CFR 74.9 - Quality assurance.

Code of Federal Regulations, 2011 CFR

2011-07-01

... specifications and are reliable, safe, effective, and otherwise suitable for their intended use. To establish and... registration under ISO Q9001-2000, American National Standard, Quality Management Systems-Requirements... ISO Q9001-2000, American National Standard, Quality Management Systems-Requirements. The Director of...

30 CFR 74.9 - Quality assurance.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH COAL MINE... registration under ISO Q9001-2000, American National Standard, Quality Management Systems-Requirements... ISO Q9001-2000, American National Standard, Quality Management Systems-Requirements. The Director of...

Sensitivity of the ISO 6579:2002/Amd 1:2007 Standard Method for Detection of Salmonella spp. on Mesenteric Lymph Nodes from Slaughter Pigs

PubMed Central

Mainar-Jaime, R. C.; Andrés, S.; Vico, J. P.; San Román, B.; Garrido, V.

2013-01-01

The ISO 6579:2002/Amd 1:2007 (ISO) standard has been the bacteriological standard method used in the European Union for the detection of Salmonella spp. in pig mesenteric lymph nodes (MLN), but there are no published estimates of the diagnostic sensitivity (Se) of the method in this matrix. Here, the Se of the ISO (SeISO) was estimated on 675 samples selected from two populations with different Salmonella prevalences (14 farms with a ≥20% prevalence and 13 farms with a <20% prevalence) and through the use of latent-class models in concert with Bayesian inference, assuming 100% ISO specificity, and an invA-based PCR as the second diagnostic method. The SeISO was estimated to be close to 87%, while the sensitivity of the PCR reached up to 83.6% and its specificity was 97.4%. Interestingly, the bacteriological reanalysis of 33 potential false-negative (PCR-positive) samples allowed isolation of 19 (57.5%) new Salmonella strains, improving the overall diagnostic accuracy of the bacteriology. Considering the usual limitations of bacteriology regarding Se, these results support the adequacy of the ISO for the detection of Salmonella spp. from MLN and also that of the PCR-based method as an alternative or complementary (screening) test for the diagnosis of pig salmonellosis, particularly considering the cost and time benefits of the molecular procedure. PMID:23100334

The rate commitment to ISO 214 standard among the persian abstracts of approved research projects at school of health management and medical informatics, Isfahan University of Medical Sciences, Isfahan, Iran.

PubMed

Papi, Ahmad; Khalaji, Davoud; Rizi, Hasan Ashrafi; Shabani, Ahmad; Hassanzadeh, Akbar

2014-01-01

Commitment to abstracting standards has a very significant role in information retrieval. The present research aimed to evaluate the rate of Commitment to ISO 214 Standard among the Persian abstracts of approved research projects at School of Health Management and Medical Informatics, Isfahan University of Medical Sciences, Isfahan, Iran. This descriptive study used a researcher-made checklist to collect data, which was then analyzed through content analysis. The studied population consisted of 227 approved research projects in the School of Health Management and Medical Informatics, Isfahan University of Medical Sciences during 2001-2010. The validity of the checklist was measured by face and content validity. Data was collected through direct observations. Statistical analyzes including descriptive (frequency distribution and percent) and inferential statistics (Chi-square test) were performed in SPSS-16. The highest and lowest commitment rates to ISO 214 standard were in using third person pronouns (100%) and using active verbs (34/4%), respectively. In addition, the highest commitment rates to ISO 214 standard (100%) related to mentioning third person pronouns, starting the abstract with a sentence to explain the subject of the research, abstract placement, and including keyword in 2009. On the other hand, during 2001-2003, the lowest commitment rate was observed in reporting research findings (16/7%). Moreover, various educational groups differed significantly only in commitment to study goals, providing research findings, and abstaining from using abbreviations, signs, and acronyms. Furthermore, educational level of the corresponding author was significantly related with extracting the keywords from the text. Other factors of ISO 214 standard did not have significant relations with the educational level of the corresponding author. In general, a desirable rate of commitment to ISO 214 standard was observed among the Persian abstracts of approved research projects at the School of Health Management and Medical Informatics of Isfahan University of Medical Sciences. However, commitment rates differed between years. In addition, commitment to ISO 214 standard was not significantly related with educational group and level.

Information risk and security modeling

NASA Astrophysics Data System (ADS)

Zivic, Predrag

2005-03-01

This research paper presentation will feature current frameworks to addressing risk and security modeling and metrics. The paper will analyze technical level risk and security metrics of Common Criteria/ISO15408, Centre for Internet Security guidelines, NSA configuration guidelines and metrics used at this level. Information IT operational standards view on security metrics such as GMITS/ISO13335, ITIL/ITMS and architectural guidelines such as ISO7498-2 will be explained. Business process level standards such as ISO17799, COSO and CobiT will be presented with their control approach to security metrics. Top level, the maturity standards such as SSE-CMM/ISO21827, NSA Infosec Assessment and CobiT will be explored and reviewed. For each defined level of security metrics the research presentation will explore the appropriate usage of these standards. The paper will discuss standards approaches to conducting the risk and security metrics. The research findings will demonstrate the need for common baseline for both risk and security metrics. This paper will show the relation between the attribute based common baseline and corporate assets and controls for risk and security metrics. IT will be shown that such approach spans over all mentioned standards. The proposed approach 3D visual presentation and development of the Information Security Model will be analyzed and postulated. Presentation will clearly demonstrate the benefits of proposed attributes based approach and defined risk and security space for modeling and measuring.

KSC Center Director Bridges addresses the audience at an ISO 9001 certification ceremony

NASA Technical Reports Server (NTRS)

1998-01-01

Center Director Roy Bridges speaks to KSC employees at the ISO certification ceremony held at the Training Auditorium. Bridges was presented an ISO 9001 certificate and plaque awarded to KSC by Det Norske Veritas (DNV), Inc., an international ISO certification organization. ISO 9001 comprises the most detailed, comprehensive set of standard requirements for quality programs established by the International Standards Organization. The presentation followed a successful independent audit by DNV of the KSC Management System in May of this year. The third-party auditors examined about 20 elements of KSC's system, including management responsibility, design control, documentation, test and inspection, and corrective action procedures. DNV found that KSC met or exceeded the stringent quality standards in all areas. KSC will use this certification as a tool to improve an already world- class team. All NASA centers are required by NASA Administrator Daniel S. Goldin to be ISO 9001 registered by September 1999. NASA is the first federal agency to seek the quality certification. Next to Bridges is Heidi Hollingsworth, with the Center for Independent Living, who uses American Sign Language for any hearing-impaired employees in the audience.

[ISO 15189 medical laboratory accreditation].

PubMed

Aoyagi, Tsutomu

2004-10-01

This International Standard, based upon ISO/IEC 17025 and ISO 9001, provides requirements for competence and quality that are particular to medical laboratories. While this International Standard is intended for use throughout the currently recognized disciplines of medical laboratory services, those working in other services and disciplines will also find it useful and appropriate. In addition, bodies engaged in the recognition of the competence of medical laboratories will be able to use this International Standard as the basis for their activities. The Japan Accreditation Board for Conformity Assessment (AB) and the Japanese Committee for Clinical Laboratory Standards (CCLS) are jointly developing the program of accreditation of medical laboratories. ISO 15189 requirements consist of two parts, one is management requirements and the other is technical requirements. The former includes the requirements of all parts of ISO 9001, moreover it includes the requirement of conformity assessment body, for example, impartiality and independence from any other party. The latter includes the requirements of laboratory competence (e.g. personnel, facility, instrument, and examination methods), moreover it requires that laboratories shall participate proficiency testing(s) and laboratories' examination results shall have traceability of measurements and implement uncertainty of measurement. Implementation of ISO 15189 will result in a significant improvement in medical laboratories management system and their technical competence. The accreditation of medical laboratory will improve medical laboratory service and be useful for patients.

Analysis on the precision of the dimensions of self-ligating brackets.

PubMed

Erduran, Rackel Hatice Milhomens Gualberto; Maeda, Fernando Akio; Ortiz, Sandra Regina Mota; Triviño, Tarcila; Fuziy, Acácio; Carvalho, Paulo Eduardo Guedes

2016-12-01

The present study aimed to evaluate the precision of the torque applied by 0.022" self-ligating brackets of different brands, the precision of parallelism between the inner walls of their slots, and precision of their slot height. Eighty brackets for upper central incisors of eight trademarked models were selected: Abzil, GAC, American Orthodontics, Morelli, Orthometric, Ormco, Forestadent, and Ortho Organizers. Images of the brackets were obtained using a scanning electron microscope (SEM) and these were measured using the AutoCAD 2011 software. The tolerance parameters stated in the ISO 27020 standard were used as references. The results showed that only the Orthometric, Morelli, and Ormco groups showed results inconsistent with the ISO standard. Regarding the parallelism of the internal walls of the slots, most of the models studied had results in line with the ISO prescription, except the Morelli group. In assessing bracket slot height, only the Forestadent, GAC, American Orthodontics, and Ormco groups presented results in accordance with the ISO standard. The GAC, Forestadent, and American Orthodontics groups did not differ in relation to the three factors of the ISO 27020 standard. Great variability of results is observed in relation to all the variables. © 2016 Wiley Periodicals, Inc.

Software And Systems Engineering Risk Management

DTIC Science & Technology

2010-04-01

RSKM 2004 COSO Enterprise RSKM Framework 2006 ISO/IEC 16085 Risk Management Process 2008 ISO/IEC 12207 Software Lifecycle Processes 2009 ISO/IEC...1 Software And Systems Engineering Risk Management John Walz VP Technical and Conferences Activities, IEEE Computer Society Vice-Chair Planning...Software & Systems Engineering Standards Committee, IEEE Computer Society US TAG to ISO TMB Risk Management Working Group Systems and Software

Systems Security Engineering

DTIC Science & Technology

2010-08-22

practice for information security management ( ISO /IEC 27002 ),” “Information technology — Security techniques — Information security management...systems —Requirements ( ISO /IEC 27002 ),”, “Information technology — Security techniques — Information security risk management ( ISO /IEC 27005).” from...associated practice aids. Perhaps the most germane discovery from this effort was a draft ISO standard on Systems and software engineering, Systems and

SGML and Related Standards: New Directions as the Second Decade Begins.

ERIC Educational Resources Information Center

Mason, James David

1997-01-01

ISO--International Organization for Standards highlights the activities of WG8 (Working Group 8 of ISO) in the alignment of standards for a common tree model and common query languages. Examines the how Document Style Semantics and Specification Language (DSSSL) and HyTime make documents easier to work with and more powerful in their ability to…

A model-driven approach to information security compliance

NASA Astrophysics Data System (ADS)

Correia, Anacleto; Gonçalves, António; Teodoro, M. Filomena

2017-06-01

The availability, integrity and confidentiality of information are fundamental to the long-term survival of any organization. Information security is a complex issue that must be holistically approached, combining assets that support corporate systems, in an extended network of business partners, vendors, customers and other stakeholders. This paper addresses the conception and implementation of information security systems, conform the ISO/IEC 27000 set of standards, using the model-driven approach. The process begins with the conception of a domain level model (computation independent model) based on information security vocabulary present in the ISO/IEC 27001 standard. Based on this model, after embedding in the model mandatory rules for attaining ISO/IEC 27001 conformance, a platform independent model is derived. Finally, a platform specific model serves the base for testing the compliance of information security systems with the ISO/IEC 27000 set of standards.

OntoCR: A CEN/ISO-13606 clinical repository based on ontologies.

PubMed

Lozano-Rubí, Raimundo; Muñoz Carrero, Adolfo; Serrano Balazote, Pablo; Pastor, Xavier

2016-04-01

To design a new semantically interoperable clinical repository, based on ontologies, conforming to CEN/ISO 13606 standard. The approach followed is to extend OntoCRF, a framework for the development of clinical repositories based on ontologies. The meta-model of OntoCRF has been extended by incorporating an OWL model integrating CEN/ISO 13606, ISO 21090 and SNOMED CT structure. This approach has demonstrated a complete evaluation cycle involving the creation of the meta-model in OWL format, the creation of a simple test application, and the communication of standardized extracts to another organization. Using a CEN/ISO 13606 based system, an indefinite number of archetypes can be merged (and reused) to build new applications. Our approach, based on the use of ontologies, maintains data storage independent of content specification. With this approach, relational technology can be used for storage, maintaining extensibility capabilities. The present work demonstrates that it is possible to build a native CEN/ISO 13606 repository for the storage of clinical data. We have demonstrated semantic interoperability of clinical information using CEN/ISO 13606 extracts. Copyright © 2016 Elsevier Inc. All rights reserved.

Nanotechnology Standardization Activities – Support of U.S. Representation on ISO/TC 229 Nanotechnologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Benko, Heather

In carrying out its responsibilities on behalf of the United States, ANSI provides comprehensive, administrative support and expertise on international protocols and procedures to: (1) the U.S. Technical Advisory Group (TAG) to the International Organization for Standardization’s (ISO) Technical Committee (TC) 229 Nanotechnologies, and (2) the corresponding U.S. TAG Working Groups tasked with formulating U.S. positions on topics relevant to nanotechnology standardization. Additionally, secretariat and procedural support is provided for the ISO/TC 229 WG 3 on health, safety and environment, for which the United States was assigned leadership by the participating national body members of ISO/TC 229. As the officialmore » entity that serves as the U.S. representative to ISO, ANSI provides not only expert coordination of U.S. positions and representation at ISO but also strategic direction, advice and procedural expertise to facilitate navigation of international issues to promote U.S. positions for incorporation into the ISO/TC 229 program of work necessary to support U.S. objectives.« less

ISO 14001 ENVIRONMENTL MANAGEMENT SYSTEMS IN GOVERNMENT AND INDUSTRY

EPA Science Inventory

Two new USEPA documents address environmental management systems (EMS) from the perspectives of government and industry and are offered as tools for understanding the process of the ISO 14000 Standards development and usefulness of an EMS approach. The first document, ISO 14001 -...

Maximizing Value for Training with ISO 9000.

ERIC Educational Resources Information Center

Russo, C. W. Russ; Russo, Tracy Callaway

1996-01-01

The International Organization for Standardization (ISO) has created quality assurance guidelines that help technology trainers and educators manage and organize training programs. This article briefly outlines program design principles, emphasizing needs analysis and outcome evaluation, performance documentation, and process management. ISO 9000…

Comparative analysis of international standards for the fatigue testing of posterior spinal fixation systems: the importance of preload in ISO 12189.

PubMed

La Barbera, Luigi; Ottardi, Claudia; Villa, Tomaso

2015-10-01

Preclinical evaluation of the mechanical reliability of fixation devices is a mandatory activity before their introduction into market. There are two standardized protocols for preclinical testing of spinal implants. The American Society for Testing Materials (ASTM) recommends the F1717 standard, which describes a vertebrectomy condition that is relatively simple to implement, whereas the International Organization for Standardization (ISO) suggests the 12189 standard, which describes a more complex physiological anterior support-based setup. Moreover, ASTM F1717 is nowadays well established, whereas ISO 12189 has received little attention: A few studies tried to accurately describe the ISO experimental procedure through numeric models, but these studies totally neglect the recommended precompression step. This study aimed to build up a reliable, validated numeric model capable of describing the stress on the rods of a spinal fixator assembled according to ISO 12189 standard procedure. Such a model would more adequately represent the in vitro testing condition. This study used finite element (FE) simulations and experimental validation testing. An FE model of the ISO setup was built to calculate the stress on the rods. Simulation was validated by comparison with experimental strain gauges measurements. The same fixator has been previously virtually mounted in an L2-L4 FE model of the lumbar spine, and stresses in the rods were calculated when the spine was subjected to physiological forces and moments. The comparison between the FE predictions and experimental measurements is in good agreement, thus confirming the suitability of the FE method to evaluate the stresses in the device. The initial precompression induces a significant extension of the assembled construct. As the applied load increases, the initial extension is gradually compensated, so that at peak load the rods are bent in flexion: The final stress value predicted is thus reduced to about 50%, if compared with the previous model where the precompression was not considered. Neglecting the initial preload due to the assembly of the overall construct according to ISO 12189 standard could lead to an overestimation of the stress on the rods up to 50%. To correctly describe the state of stress on the posterior spinal fixator, tested according to the ISO procedure, it is important to take into account the initial preload due to the assembly of the overall construct. Copyright © 2015 Elsevier Inc. All rights reserved.

Iso standardization of theoretical activity evaluation method for low and intermediate level activated waste generated at nuclear power plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Makoto Kashiwagi; Garamszeghy, Mike; Lantes, Bertrand

Disposal of low-and intermediate-level activated waste generated at nuclear power plants is being planned or carried out in many countries. The radioactivity concentrations and/or total quantities of long-lived, difficult-to-measure nuclides (DTM nuclides), such as C-14, Ni-63, Nb-94, α emitting nuclides etc., are often restricted by the safety case for a final repository as determined by each country's safety regulations, and these concentrations or amounts are required to be known and declared. With respect to waste contaminated by contact with process water, the Scaling Factor method (SF method), which is empirically based on sampling and analysis data, has been applied asmore » an important method for determining concentrations of DTM nuclides. This method was standardized by the International Organization for Standardization (ISO) and published in 2007 as ISO21238 'Scaling factor method to determine the radioactivity of low and intermediate-level radioactive waste packages generated at nuclear power plants' [1]. However, for activated metal waste with comparatively high concentrations of radioactivity, such as may be found in reactor control rods and internal structures, direct sampling and radiochemical analysis methods to evaluate the DTM nuclides are limited by access to the material and potentially high personnel radiation exposure. In this case, theoretical calculation methods in combination with empirical methods based on remote radiation surveys need to be used to best advantage for determining the disposal inventory of DTM nuclides while minimizing exposure to radiation workers. Pursuant to this objective a standard for the theoretical evaluation of the radioactivity concentration of DTM nuclides in activated waste, is in process through ISO TC85/SC5 (ISO Technical Committee 85: Nuclear energy, nuclear technologies, and radiological protection; Subcommittee 5: Nuclear fuel cycle). The project team for this ISO standard was formed in 2011 and is composed of experts from 11 countries. The project team has been conducting technical discussions on theoretical methods for determining concentrations of radioactivity, and has developed the draft International Standard of ISO16966 'Theoretical activation calculation method to evaluate the radioactivity of activated waste generated at nuclear reactors' [2]. This paper describes the international standardization process developed by the ISO project team, and outlines the following two theoretical activity evaluation methods:? Point method? Range method. (authors)« less

A Systems Engineering Capability Maturity Model, Version 1.1,

DTIC Science & Technology

1995-11-01

of a sequence of actions to be taken to perform a given task. [SECMM] 1. A set of activities ( ISO 12207 ). 2. A set of practices that address the...standards One of the design goals of the SE-CMM effort was to capture the salient concepts from emerging standards and initiatives (e.g.; ISO 9001...history for the SE-CMM: Version Designator Content Change Notes Release 1 • architecture rationale • Process Areas • ISO (SPICE) BPG 0.05 summary

49 CFR 173.121 - Class 3-Assignment of packing group.

Code of Federal Regulations, 2010 CFR

2010-10-01

...-cup) Initial boiling point I ≤35°C (95 °F) II 35 °C (95 °F) III ≥23 °C, ≤60 °C (≥73 °F, ≤140 °F) >35... determined at 23 °C (73.4 °F) using the ISO standard cup with a 4 mm (0.16 inch) jet as set forth in ISO 2431... carried out using the ISO standard cup with a 6 mm (0.24 inch) jet. (ii) Solvent Separation Test. This...

The ISO Standard Guide for the Evaluation of Human Exposure to Whole- Body Vibration

DTIC Science & Technology

1975-11-01

Wright-Patterson Air Force Base AFTER 10 YEARS of intensive work of Subcom- broad support for a document, which tries to mittee 4, "Human Expost -re to...The ISO member ber of clarifying studies directed to fill in bodies of 20 countries interested in this sub- gaps in our krowledge or to support or...standard. As Chairman of the tions incorporating the all-important expo- ISO subcommittee, which prepared this document, sure time as a factor . I can

Implementing ISO/IEEE 11073: proposal of two different strategic approaches.

PubMed

Martínez-Espronceda, M; Serrano, L; Martínez, I; Escayola, J; Led, S; Trigo, J; García, J

2008-01-01

This paper explains the challenges encountered during the ISO/IEEE 11073 standard implementation process. The complexity of the standard and the consequent heavy requirements, which have not encouraged software engineers to adopt the standard. The developing complexity evaluation drives us to propose two possible implementation strategies that cover almost all possible use cases and eases handling the standard by non-expert users. The first one is focused on medical devices (MD) and proposes a low-memory and low-processor usage technique. It is based on message patterns that allow simple functions to generate ISO/IEEE 11073 messages and to process them easily. In this way a framework for MDs can be obtained. Second one is focused on more powerful machines such as data loggers or gateways (aka. computer engines (CE)), which do not have the MDs' memory and processor usage constraints. For CEs a more intelligent and adaptative Plug&Play (P&P) solution is provided. It consists on a general platform that can access to any device supported by the standard. Combining both strategies will cut developing time for applications based on ISO/EEE 11073.

Validation of standard method EN ISO 11290-part 2 for the enumeration of Listeria monocytogenes in food.

PubMed

Rollier, Patricia; Lombard, Bertrand; Guillier, Laurent; François, Danièle; Romero, Karol; Pierru, Sylvie; Bouhier, Laurence; Gnanou Besse, Nathalie

2018-05-01

The reference method for the detection and enumeration of L. monocytogenes in food (Standards EN ISO 11290-1&2) have been validated by inter-laboratory studies in the frame of the Mandate M381 from European Commission to CEN. In this paper, the inter-laboratory studies led in 2013 on 5 matrices (cold-smoked salmon, milk powdered infant food formula, vegetables, environment, and cheese) to validate Standard EN ISO 11290-2 are reported. According to the results obtained, the method of the revised Standard EN ISO 11290-2 can be considered as a good method for the enumeration of L. monocytogenes in foods and food processing environment, in particular for the matrices included in the study. Values of repeatability and reproducibility standard deviations can be considered satisfactory for this type of method with a confirmation stage, since most of them were below 0.3 log 10 , also at low levels, close to the regulatory limit of 100 CFU/g. Copyright © 2018 Elsevier B.V. All rights reserved.

International Standardization of the Clinical Dosimetry of Beta Radiation Brachytherapy Sources: Progress of an ISO Standard

NASA Astrophysics Data System (ADS)

Soares, Christopher

2006-03-01

In 2004 a new work item proposal (NWIP) was accepted by the International Organization for Standardization (ISO) Technical Committee 85 (TC85 -- Nuclear Energy), Subcommittee 2 (Radiation Protection) for the development of a standard for the clinical dosimetry of beta radiation sources used for brachytherapy. To develop this standard, a new Working Group (WG 22 - Ionizing Radiation Dosimetry and Protocols in Medical Applications) was formed. The standard is based on the work of an ad-hoc working group initiated by the Dosimetry task group of the Deutsches Insitiut für Normung (DIN). Initially the work was geared mainly towards the needs of intravascular brachytherapy, but with the decline of this application, more focus has been placed on the challenges of accurate dosimetry for the concave eye plaques used to treat ocular melanoma. Guidance is given for dosimetry formalisms, reference data to be used, calibrations, measurement methods, modeling, uncertainty determinations, treatment planning and reporting, and clinical quality control. The document is currently undergoing review by the ISO member bodies for acceptance as a Committee Draft (CD) with publication of the final standard expected by 2007. There are opportunities for other ISO standards for medical dosimetry within the framework of WG22.

Specification of Energy Assessment Methodologies to Satisfy ISO 50001 Energy Management Standard

NASA Astrophysics Data System (ADS)

Kanneganti, Harish

Energy management has become more crucial for industrial sector as a way to lower their cost of production and in reducing their carbon footprint. Environmental regulations also force the industrial sector to increase the efficiency of their energy usage. Hence industrial sector started relying on energy management consultancies for improvements in energy efficiency. With the development of ISO 50001 standard, the entire energy management took a new dimension involving top level management and getting their commitment on energy efficiency. One of the key requirements of ISO 50001 is to demonstrate continual improvement in their (industry) energy efficiency. The major aim of this work is to develop an energy assessment methodology and reporting format to tailor the needs of ISO 50001. The developed methodology integrates the energy reduction aspect of an energy assessment with the requirements of sections 4.4.3 (Energy Review) to 4.4.6 (Objectives, Targets and Action Plans) in ISO 50001 and thus helping the facilities in easy implementation of ISO 50001.

The ISOPHOT 170 μm Serendipity Survey. IV. The far-infrared sky atlas

NASA Astrophysics Data System (ADS)

Stickel, M.; Krause, O.; Klaas, U.; Lemke, D.

2007-05-01

Aims:To further increase the scientific utilization of the strip scanning measurements of the ISOPHOT Serendipity Survey (ISOSS), the slew data has been assembled to a sky atlas with ≈15% sky coverage in the hitherto unobserved far-infrared wavelength band around 170 μm. Methods: The redundant information of the brightnesses at slew crossings has been used to globally rescale and homogenize the slew brightnesses, leading to significantly increased photometric accuracy and reproducibility as well as the homogeneity of the maps. The corrected slew data were mapped with a constant grid size of 22.4 arcsec and are presented in 124 maps in galactic coordinates. Results: The collection of image plates represents the ISOSS Sky Atlas, which will become available from major data archives. Exemplary scientific results are described, which show the scientific potential of the data set combined with far-infrared imaging data from previous and upcoming missions. Based on observations with ISO, an ESA project with instruments funded by ESA Member States (especially the PI countries: France, Germany, The Netherlands and the United Kingdom) and with the participation of ISAS and NASA. Members of the Consortium on the ISOPHOT Serendipity Survey (CISS) are MPIA Heidelberg, ESAC Villafranca, AIP Potsdam, IPAC Pasadena, Imperial College London. Image files (FITS files) are available in electronic form at the CDS via anonymous ftp to cdsarc.u-strasbg.fr (130.79.128.5) or via http://cdsweb.u-strasbg.fr/cgi-bin/qcat?J/A+A/466/1205 and the ISO Data Archive www.iso.vilspa.esa.es/

Quality assurance and management in microelectronics companies: ISO 9000 versus Six Sigma

NASA Astrophysics Data System (ADS)

Lupan, Razvan; Kobi, Abdessamad; Robledo, Christian; Bacivarov, Ioan; Bacivarov, Angelica

2009-01-01

A strategy for the implementation of the Six Sigma method as an improvement solution for the ISO 9000:2000 Quality Standard is proposed. Our approach is focused on integrating the DMAIC cycle of the Six Sigma method with the PDCA process approach, highly recommended by the standard ISO 9000:2000. The Six Sigma steps applied to each part of the PDCA cycle are presented in detail, giving some tools and training examples. Based on this analysis the authors conclude that applying Six Sigma philosophy to the Quality Standard implementation process is the best way to achieve the optimal results in quality progress and therefore in customers satisfaction.

The Effect of ISO 9001 and the EFQM Model on Improving Hospital Performance: A Systematic Review.

PubMed

Yousefinezhadi, Taraneh; Mohamadi, Efat; Safari Palangi, Hossein; Akbari Sari, Ali

2015-12-01

This study aimed to explore the effect of the International Organization for Standardization (ISO) ISO 9001 standard and the European foundation for quality management (EFQM) model on improving hospital performance. PubMed, Embase and the Cochrane Library databases were searched. In addition, Elsevier and Springer were searched as main publishers in the field of health sciences. We included empirical studies with any design that had used ISO 9001 or the EFQM model to improve the quality of healthcare. Data were collected and tabulated into a data extraction sheet that was specifically designed for this study. The collected data included authors' names, country, year of publication, intervention, improvement aims, setting, length of program, study design, and outcomes. Seven out of the 121 studies that were retrieved met the inclusion criteria. Three studies assessed the EFQM model and four studies assessed the ISO 9001 standard. Use of the EFQM model increased the degree of patient satisfaction and the number of hospital admissions and reduced the average length of stay, the delay on the surgical waiting list, and the number of emergency re-admissions. ISO 9001 also increased the degree of patient satisfaction and patient safety, increased cost-effectiveness, improved the hospital admissions process, and reduced the percentage of unscheduled returns to the hospital. Generally, there is a lack of robust and high quality empirical evidence regarding the effects of ISO 9001 and the EFQM model on the quality care provided by and the performance of hospitals. However, the limited evidence shows that ISO 9001 and the EFQM model might improve hospital performance.

KSC-98pc909

NASA Image and Video Library

1998-08-11

Center Director Roy Bridges speaks to KSC employees at the ISO certification ceremony held at the Training Auditorium. Bridges was presented an ISO 9001 certificate and plaque awarded to KSC by Det Norske Veritas (DNV), Inc., an international ISO certification organization. ISO 9001 comprises the most detailed, comprehensive set of standard requirements for quality programs established by the International Standards Organization. The presentation followed a successful independent audit by DNV of the KSC Management System in May of this year. The third-party auditors examined about 20 elements of KSC's system, including management responsibility, design control, documentation, test and inspection, and corrective action procedures. DNV found that KSC met or exceeded the stringent quality standards in all areas. KSC will use this certification as a tool to improve an already worldclass team. All NASA centers are required by NASA Administrator Daniel S. Goldin to be ISO 9001 registered by September 1999. NASA is the first federal agency to seek the quality certification. Next to Bridges is Heidi Hollingsworth, with the Center for Independent Living, who uses American Sign Language for any hearing-impaired employees in the audience

ISO and US Standards for Thermal Cutting and Joint Preparation (U)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kautz, D.; Hochanadel, P.

The summary of this presentation is: (1) There is a lot of shared space between AWS and ISO documents; (2) Several areas use the same specifications and standards, especially true in process materials; and (3) Equipment is one area with very little overlap.

CERT Resilience Management Model (CERT-RMM) V1.1: NIST Special Publication Crosswalk Version 1

DTIC Science & Technology

2011-11-01

Organization for Standards ( ISO ) and International Electrotechnical Commission (IEC) 27000 series, COBIT, the British Standards Institution’s BS 25999...and ISO 24762 • includes quantitative process measurements that can be used to ensure operational resilience processes are performing as intended

Interoperability in digital electrocardiography: harmonization of ISO/IEEE x73-PHD and SCP-ECG.

PubMed

Trigo, Jesús D; Chiarugi, Franco; Alesanco, Alvaro; Martínez-Espronceda, Miguel; Serrano, Luis; Chronaki, Catherine E; Escayola, Javier; Martínez, Ignacio; García, José

2010-11-01

The ISO/IEEE 11073 (x73) family of standards is a reference frame for medical device interoperability. A draft for an ECG device specialization (ISO/IEEE 11073-10406-d02) has already been presented to the Personal Health Device (PHD) Working Group, and the Standard Communications Protocol for Computer-Assisted ElectroCardioGraphy (SCP-ECG) Standard for short-term diagnostic ECGs (EN1064:2005+A1:2007) has recently been approved as part of the x73 family (ISO 11073-91064:2009). These factors suggest the coordinated use of these two standards in foreseeable telecardiology environments, and hence the need to harmonize them. Such harmonization is the subject of this paper. Thus, a mapping of the mandatory attributes defined in the second draft of the ISO/IEEE 11073-10406-d02 and the minimum SCP-ECG fields is presented, and various other capabilities of the SCP-ECG Standard (such as the messaging part) are also analyzed from an x73-PHD point of view. As a result, this paper addresses and analyzes the implications of some inconsistencies in the coordinated use of these two standards. Finally, a proof-of-concept implementation of the draft x73-PHD ECG device specialization is presented, along with the conversion from x73-PHD to SCP-ECG. This paper, therefore, provides recommendations for future implementations of telecardiology systems that are compliant with both x73-PHD and SCP-ECG.

21 CFR 26.60 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Vocabulary of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC)” (ISO/IEC Guide 2) (1996 edition), which is incorporated by reference in accordance with 5 U...://www.iso.ch or may be examined at the Food and Drug Administration's Medical Library, 5600 Fishers Lane...

[Laboratory accreditation and proficiency testing].

PubMed

Kuwa, Katsuhiko

2003-05-01

ISO/TC 212 covering clinical laboratory testing and in vitro diagnostic test systems will issue the international standard for medical laboratory quality and competence requirements, ISO 15189. This standard is based on the ISO/IEC 17025, general requirements for competence of testing and calibration laboratories and ISO 9001, quality management systems-requirements. Clinical laboratory services are essential to patient care and therefore should be available to meet the needs of all patients and clinical personnel responsible for human health care. If a laboratory seeks accreditation, it should select an accreditation body that operates according to this international standard and in a manner which takes into account the particular requirements of clinical laboratories. Proficiency testing should be available to evaluate the calibration laboratories and reference measurement laboratories in clinical medicine. Reference measurement procedures should be of precise and the analytical principle of measurement applied should ensure reliability. We should be prepared to establish a quality management system and proficiency testing in clinical laboratories.

[The design and development of a quality system for the diagnosis of exotic animal diseases at the National Centre for Animal and Plant Health in Cuba].

PubMed

de Oca, N Montes; Villoch, A; Pérez Ruano, M

2004-12-01

A quality system for the diagnosis of exotic animal diseases was developed at the national centre for animal and plant health (CENSA), responsible for coordinating the clinical, epizootiological and laboratory diagnosis of causal agents of exotic animal diseases in Cuba. A model was designed on the basis of standard ISO 9001:2000 of the International Organization for Standardization (ISO), standard ISO/IEC 17025:1999 of ISO and the International Electrotechnical Commission, recommendations of the World Organisation for Animal Health (OIE) and other regulatory documents from international and national organisations that deal specifically with the treatment of emerging diseases. Twenty-nine standardised operating procedures were developed, plus 13 registers and a checklist to facilitate the evaluation of the system. The effectiveness of the quality system was confirmed in the differential diagnosis of classical swine fever at an animal virology laboratory in Cuba.

Software Quality Evaluation Models Applicable in Health Information and Communications Technologies. A Review of the Literature.

PubMed

Villamor Ordozgoiti, Alberto; Delgado Hito, Pilar; Guix Comellas, Eva María; Fernandez Sanchez, Carlos Manuel; Garcia Hernandez, Milagros; Lluch Canut, Teresa

2016-01-01

Information and Communications Technologies in healthcare has increased the need to consider quality criteria through standardised processes. The aim of this study was to analyse the software quality evaluation models applicable to healthcare from the perspective of ICT-purchasers. Through a systematic literature review with the keywords software, product, quality, evaluation and health, we selected and analysed 20 original research papers published from 2005-2016 in health science and technology databases. The results showed four main topics: non-ISO models, software quality evaluation models based on ISO/IEC standards, studies analysing software quality evaluation models, and studies analysing ISO standards for software quality evaluation. The models provide cost-efficiency criteria for specific software, and improve use outcomes. The ISO/IEC25000 standard is shown as the most suitable for evaluating the quality of ICTs for healthcare use from the perspective of institutional acquisition.

Performance of Cleared Blood Glucose Monitors.

PubMed

Klonoff, David C; Prahalad, Priya

2015-07-01

Cleared blood glucose monitor (BGM) systems do not always perform as accurately for users as they did to become cleared. We performed a literature review of recent publications between 2010 and 2014 that present data about the frequency of inaccurate performance using ISO 15197 2003 and ISO 15197 2013 as target standards. We performed an additional literature review of publications that present data about the clinical and economic risks of inaccurate BGMs for making treatment decisions or calibrating continuous glucose monitors (CGMs). We found 11 publications describing performance of 98 unique BGM systems. 53 of these 98 (54%) systems met ISO 15197 2003 and 31 of the 98 (32%) tested systems met ISO 15197 2013 analytical accuracy standards in all studies in which they were evaluated. Of the tested systems, 33 were identified by us as FDA-cleared. Among these FDA-cleared BGM systems, 24 out of 32 (75%) met ISO 15197 2003 and 15 out of 31 (48.3%) met ISO 15197 2013 in all studies in which they were evaluated. Among the non-FDA-cleared BGM systems, 29 of 65 (45%) met ISO 15197 2003 and 15 out of 65 (23%) met ISO 15197 2013 in all studies in which they were evaluated. It is more likely that an FDA-cleared BGM system, compared to a non-FDA-cleared BGM system, will perform according to ISO 15197 2003 (χ(2) = 6.2, df = 3, P = 0.04) and ISO 15197 2013 (χ(2) = 11.4, df = 3, P = 0.003). We identified 7 articles about clinical risks and 3 articles about economic risks of inaccurate BGMs. We conclude that a significant proportion of cleared BGMs do not perform at the level for which they were cleared or according to international standards of accuracy. Such poor performance leads to adverse clinical and economic consequences. © 2015 Diabetes Technology Society.

Hip contact forces in asymptomatic total hip replacement patients differ from normal healthy individuals: Implications for preclinical testing.

PubMed

Li, Junyan; Redmond, Anthony C; Jin, Zhongmin; Fisher, John; Stone, Martin H; Stewart, Todd D

2014-08-01

Preclinical durability testing of hip replacement implants is standardised by ISO-14242-1 (2002) which is based on historical inverse dynamics analysis using data obtained from a small sample of normal healthy individuals. It has not been established whether loading cycles derived from normal healthy individuals are representative of loading cycles occurring in patients following total hip replacement. Hip joint kinematics and hip contact forces derived from multibody modelling of forces during normal walking were obtained for 15 asymptomatic total hip replacement patients and compared to 38 normal healthy individuals and to the ISO standard for pre-clinical testing. Hip kinematics in the total hip replacement patients were comparable to the ISO data and the hip contact force in the normal healthy group was also comparable to the ISO cycles. Hip contact forces derived from the asymptomatic total hip replacement patients were comparable for the first part of the stance period but exhibited 30% lower peak loads at toe-off. Although the ISO standard provides a representative kinematic cycle, the findings call into question whether the hip joint contact forces in the ISO standard are representative of those occurring in the joint following total hip replacement. Copyright © 2014. Published by Elsevier Ltd.

Association between the application of ISO 9001:2008 alone or in combination with health-specific standards and quality-related activities in Hungarian hospitals.

PubMed

Dombrádi, Viktor; Csenteri, Orsolya Karola; Sándor, János; Godény, Sándor

2017-04-01

To investigate how International Organization for Standardization (ISO) 9001 and the Hungarian Health Care Standards (HHCS) certifications are associated with quality management, patient safety, patient rights and human resource management activities. A cross-sectional study was implemented using the 2009 Hungarian hospital survey's database. Hungary. Fifty-three general hospitals were included in the statistical analysis. No intervention was carried out in the study. The outcomes included the percentage of compliance in the dimensions of quality management, patient safety, patient rights, human resource management and the overall score for each hospital, and they were grouped according to the hospitals' certifications. Sixteen hospitals did not have either ISO 9001 or HHCS certifications, 19 had ISO 9001 certification only and 18 had both. Hospitals with ISO 9001 alone or in combination with the HHCS significantly outperformed hospitals with no certifications in terms of quality management and human resource management activities but not in terms of patient safety or patient rights activities. Combined, the two models provided the highest median levels in all cases. Nevertheless, no significant differences were observed when the hospitals with both certifications were compared with hospitals with ISO 9001 only. Although the combination of ISO 9001 and the HHCS showed the best results, the benefits were not decisive. Furthermore, although the HHCS include standards addressing patient safety, no direct association was found with regard to compliance. Thus, further investigation is required to understand this enigma. © The Author 2017. Published by Oxford University Press in association with the International Society for Quality in Health Care. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

The use of computerized image guidance in lumbar disk arthroplasty.

PubMed

Smith, Harvey E; Vaccaro, Alexander R; Yuan, Philip S; Papadopoulos, Stephen; Sasso, Rick

2006-02-01

Surgical navigation systems have been increasingly studied and applied in the application of spinal instrumentation. Successful disk arthroplasty requires accurate midline and rotational positioning for optimal function and longevity. A surgical simulation study in human cadaver specimens was done to evaluate and compare the accuracy of standard fluoroscopy, computer-assisted fluoroscopic image guidance, and Iso-C3D image guidance in the placement of lumbar intervertebral disk replacements. Lumbar intervertebral disk prostheses were placed using three different image guidance techniques in three human cadaver spine specimens at multiple levels. Postinstrumentation accuracy was assessed with thin-cut computed tomography scans. Intervertebral disk replacements placed using the StealthStation with Iso-C3D were more accurately centered than those placed using the StealthStation with FluoroNav and standard fluoroscopy. Intervertebral disk replacements placed with Iso-C3D and FluoroNav had improved rotational divergence compared with standard fluoroscopy. Iso-C3D and FluoroNav had a smaller interprocedure variance than standard fluoroscopy. These results did not approach statistical significance. Relative to both virtual and standard fluoroscopy, use of the StealthStation with Iso-C3D resulted in improved accuracy in centering the lumbar disk prosthesis in the coronal midline. The StealthStation with FluoroNav appears to be at least equivalent to standard fluoroscopy and may offer improved accuracy with rotational alignment while minimizing radiation exposure to the surgeon. Surgical guidance systems may offer improved accuracy and less interprocedure variation in the placement of intervertebral disk replacements than standard fluoroscopy. Further study regarding surgical navigation systems for intervertebral disk replacement is warranted.

ISO 9001 certification for hospitals in Bulgaria: does it help service?

PubMed

Stoimenova, Assena; Stoilova, Ani; Petrova, Guenka

2014-03-04

The aim of our study is to review the published literature on establishment and implementation of ISO 9001 QMS in European hospitals, to study the availability of International Organization for Standardization (ISO) quality management systems (QMS) in Bulgarian hospitals and to outline the main advantages of ISO implementation in the hospitals in Bulgaria. The information on availability of ISO QMS in the hospitals in Bulgaria was gathered via Bulgarian certification register, the registries of various quality associations, websites of hospitals and certification companies presented in Bulgaria. A total number of 312 hospitals in Bulgaria were screened for the availability of QMS certified against the ISO 9001 requirements. The experience of European hospitals that implemented QMS is positive and the used approaches to improve the processes and the demonstrated effects from ISO implementation are analysed by the researchers. Unlike other European Union member states, the establishment of quality management systems in Bulgaria is not compulsory. However, our study revealed that 14.42% of the hospitals in Bulgaria have implemented and have certified quality systems against the requirements of ISO 9001. Our study confirmed that a quality management system using the ISO 9001 standard is useful for the hospitals as it can help to increase the operational efficiencies, to reduce errors, improve patient safety and produce a more preventive approach instead of a reactive environment.

Report of Official foreign Travel to Spain April 17-29, 1999. (in English;)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mason, j.d.

The Department of Energy (DOE) has moved rapidly toward electronic production, management, and dissemination of scientific and technical information. The World-Wide Web (WWW) has become a primary means of information dissemination. Electronic commerce (EC) is becoming the preferred means of procurement. DOE, like other government agencies, depends on and encourages the use of international standards in data communications. Like most government agencies, DOE has expressed a preference for openly developed standards in preference to proprietary designs promoted as "standards" by vendors. In particular, there is a preference for standards developed by organizations such as the International Organization for Standardization (ISO)more » and the American National Standards Institute (ANSI) that use open, public processes to develop their standards. Among the most widely adopted international standards is the Standard Generalized Markup Language (SGML, ISO 8879:1986, FIPS 152), which DOE has selected as the basis of its electronic management of documents. Besides the official commitment, which has resulted in several specialized projects, DOE makes heavy use of coding derived from SGML, and its use is likely to increase in the future. Most documents on the WWW are coded in HTML ("Hypertext Markup Language"), which is an application of SGML. The World-Wide Web Consortium (W3C), with the backing of major software houses like Microsoft, Adobe, and Netscape, is promoting XML ("eXtensible Markup Language"), a class of SGML applications, for the future of the WWW and the basis for EC. W3C has announced its intention of discontinuing future development of HTML and replacing it with XHTML, an application of XML. In support of DOE's use of these standards, I have served since 1985 as Chairman of the international committee responsible for SGML and related standards, ISO/IEC JTC1/SC34 (SC34) and its predecessor organizations. During my April 1999 trip, I convened the spring 1999 meeting of SC34 in Granada, Spain. I also attended a major conference on the use of SGML and XML. SC34 maintains and continues to enhance several standards. In addition to SGML, which is the basis of HTML and XML, SC34 also works on the Document Style Semantics and Specification Language (DSSSL), which is the basis for W3C's XSL ("eXtensible Style Language," to be used with XML) and the Hypermedia/Time-based Document Structuring Language (HyTime), which is a major influence on W3C's XLink ("XML Linking Language"). SC34 is also involved in work with ISO's TC184, Industrial Data, on the linking of STEP (the standard for the interchange of product model data) with SGML. In addition to the widespread use of the WWW among DOE's plants and facilities in Oak Ridge and among DOE sites across the nation, there are several SGML-based projects at the Y-12 Plant. My project team in Information Technology Services developed an SGML-based publications system that has been used for several major reports at the Y-12 Plant and Oak Ridge National Laboratory (ORNL). SGML is a component of the Weapons Records Archiving and Preservation (WRAP) project at the Y-12 Plant and is the format for catalog metadata chosen for weapons records by the Nuclear Weapons Information Group (NWIG). Supporting standards development allows DOE and the Y-12 plant both input into the process and the opportunity to benefit from contact with some of the leading experts in the subject matter. Oak Ridge has been for some years the location to which other DOE sites turn for expertise in SGML and related topics.« less

ISO 9000 Quality Systems: Application to Higher Education.

ERIC Educational Resources Information Center

Clery, Roger G.

This paper describes and explains the 20 elements of the International Organization for Standards 9000 (ISO 9000) series, a model for quality assurance in the business processes of design/development, production, installation and servicing. The standards were designed in 1987 to provide a common denominator for business quality particularly to…

Quality Assurance Systems, TQM, and the New Collegialism.

ERIC Educational Resources Information Center

Harvey, Lee

This report discusses the application of the International Organization for Standards's ISO9000 quality assurance standard and Total Quality Management (TQM) to higher education in light of the "new collegialism." It defines the basic elements of ISO9000 and TQM, reviews the strengths and weaknesses of both approaches, and notes efforts…

ISO 9000 and Higher Education: Can This Approach to Quality Work on Campus?

ERIC Educational Resources Information Center

Bennett, Charles

1997-01-01

The most widely recognized quality management standard in the world, the International Organization for Standardization's ISO 9000, is considered by some in higher education to have much potential for college administration. Its advantages include its focus on organizational infrastructure, adaptability, articulation of tangible requirements for…

CERT (registered trademark) Resilience Management Model (CERT (registered trademark)-RMM) V1.1: NIST Special Publication Crosswalk Version 2

DTIC Science & Technology

2014-06-01

27000 series, COBIT, the British Standards Institution’s BS 25999, and ISO 24762  includes quantitative process measurements that can be used to...the NIST special publications 800 series, the International Organization for Standards ( ISO ) and International Electrotechnical Commission (IEC

Checklist of Standards Applicable to the Preservation of Archives and Manuscripts.

ERIC Educational Resources Information Center

Walch, Victoria Irons, Comp.

1990-01-01

Presents a checklist of more than 150 standards that have been identified by the Society of American Archivists (SAA) Task Force on Archival Standards as applicable to the preservation of archives and manuscripts. The organizations that developed the standards are described, and increased archival participation in the standards development process…

International development of methods of analysis for the presence of products of modern biotechnology.

PubMed

Cantrill, Richard C

2008-01-01

Methods of analysis for products of modern biotechnology are required for national and international trade in seeds, grain and food in order to meet the labeling or import/export requirements of different nations and trading blocks. Although many methods were developed by the originators of transgenic events, governments, universities, and testing laboratories, trade is less complicated if there exists a set of international consensus-derived analytical standards. In any analytical situation, multiple methods may exist for testing for the same analyte. These methods may be supported by regional preferences and regulatory requirements. However, tests need to be sensitive enough to determine low levels of these traits in commodity grain for regulatory purposes and also to indicate purity of seeds containing these traits. The International Organization for Standardization (ISO) and its European counterpart have worked to produce a suite of standards through open, balanced and consensus-driven processes. Presently, these standards are approaching the time for their first review. In fact, ISO 21572, the "protein standard" has already been circulated for systematic review. In order to expedite the review and revision of the nucleic acid standards an ISO Technical Specification (ISO/TS 21098) was drafted to set the criteria for the inclusion of precision data from collaborative studies into the annexes of these standards.

On the Effect of Thermophysical Properties of Clothing on the Heat Strain Predicted by PHS Model.

PubMed

d'Ambrosio Alfano, Francesca Romana; Palella, Boris Igor; Riccio, Giuseppe; Malchaire, Jacques

2016-03-01

Procedures and equations reported in ISO 9920 for the correction of basic thermophysical clothing properties taking into account pumping effect and air movement are very different from those used by the Predicted Heat Strain (PHS) model in ISO 7933. To study the effect of these differences on the assessment of hot environments using the PHS model, an analysis focusing on the modelling of the dynamic thermal insulation and the vapour resistance of the clothing reported in ISO 9920 and ISO 7933 standards will be discussed in this paper. The results are useful evidence to start a discussion on the best practice for dealing with clothing thermophysical properties and underline the need to harmonize the entire set of standards in the field of the Ergonomics of the Thermal Environment. ISO 7933 is presently under revision. © The Author 2015. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

The Quality Adaptation Model: Adaptation and Adoption of the Quality Standard ISO/IEC 19796-1 for Learning, Education, and Training

ERIC Educational Resources Information Center

Pawlowski, Jan M.

2007-01-01

In 2005, the new quality standard for learning, education, and training, ISO/IEC 19796-1, was published. Its purpose is to help educational organizations to develop quality systems and to improve the quality of their processes, products, and services. In this article, the standard is presented and compared to existing approaches, showing the…

Standardization of Assistive Products with Robotic Technology - From a Perspective of ISO/TC173.

PubMed

Inoue, Takenobu; Yamauchi, Shigeru; Westman, Karl-Erik

2017-01-01

ISO/TC173 is a technical committee, in charge of international standardization of assistive products (APs). Robotic technology (RT) is currently an important topic in this field. APs with RT will be included in future revisions of the scope of TC173. Cooperation between the AP and RT space is essential to reach suitable solutions of future standardization.

Assessing eco-toxicological effects of industrial 2,4-D acid iso-octylester herbicide on rat pancreas and liver.

PubMed

Kalipci, E; Ozdemir, C; Oztas, H

2013-05-01

We studied the eco-toxic and carcinogenic effects of a commonly used 2,4-D acid iso-octylester herbicide on rat liver and pancreas. The rats in Group 1 were fed a standard feed and the rats in Group 2 were fed with standard feed to which was added 200 mg/kg/day 2,4-D acid iso-octylester for 16 weeks. Azaserine, 30 mg/kg/body weight, was injected into rats of Groups 3 and 4 to investigate the effects of 2,4-D acid iso-octylester on the development of neoplasms. After feeding the rats with neoplasms in Group 4 with food including 200 mg/kg/day 2,4-D acid iso-octylester for 16 weeks, an autopsy was carried out on all animals. We found that 2,4-D acid iso-octylester caused the formation of atypical cell foci (ACF) in the pancreata and livers of rats. ACF that were formed experimentally by exposure to azaserine had increased diameter, volume and number of atypical cell foci/mm(2) and mm(3) after exposure to 2,4-D acid iso-octylester. Our observations indicated that this herbicide potentially is a cancer initiator.

Experience of Implementing ISO 15189 Accreditation at a University Laboratory

PubMed Central

2015-01-01

The present article summarizes the authors’ experience with the implementation of a quality management system based on ISO 17025 and ISO 15189 standards at university laboratories. The accreditation of the analytical procedures at the Universidad Mariano Gálvez represented a challenge due to the unique nature of an educational institution and the difference in nature to the standards implemented. Sample handling and care of the patient were combined to achieve an integrated management system. We explain the development of the management system, the obstacles and benefits of the system and concluding that it is possible to design a management system based on ISO 15189 for the university lab that allowed delivering results assuring technical competence to patient care and welfare. PMID:27683499

A case study of ISO 11064 in control centre design in the Norwegian petroleum industry.

PubMed

Aas, Andreas Lumbe; Skramstad, Torbjørn

2010-12-01

In 2006-2008 we performed a case study for the purpose of assessing the industrial application of the seven part Control Centre (CC) design standard ISO 11064 to identify positive and negative experiences among stakeholders in the Norwegian petroleum sector. We mainly focussed on ISO 11064 Part 1, because this was the most commonly used among the identified stakeholders. ISO 11064 is generally appreciated and applied in the industry, but we did observe a significant variance in use between the different parts of the standard. We also identified potential areas for improvements, like scope and application adaptation. Thus we suggest a more goal-based approach based on one normative part only. Copyright © 2010 Elsevier Ltd. All rights reserved.

Biometric identity management for standard mobile medical networks.

PubMed

Egner, Alexandru; Soceanu, Alexandru; Moldoveanu, Florica

2012-01-01

The explosion of healthcare costs over the last decade has prompted the ICT industry to respond with solutions for reducing costs while improving healthcare quality. The ISO/IEEE 11073 family of standards recently released is the first step towards interoperability of mobile medical devices used in patient environments. The standards do not, however, tackle security problems, such as identity management, or the secure exchange of medical data. This paper proposes an enhancement of the ISO/IEEE 11073-20601 protocol with an identity management system based on biometry. The paper describes a novel biometric-based authentication process, together with the biometric key generation algorithm. The proposed extension of the ISO/IEEE 11073-20601 is also presented.

The Effect of ISO 9001 and the EFQM Model on Improving Hospital Performance: A Systematic Review

PubMed Central

Yousefinezhadi, Taraneh; Mohamadi, Efat; Safari Palangi, Hossein; Akbari Sari, Ali

2015-01-01

Context: This study aimed to explore the effect of the International Organization for Standardization (ISO) ISO 9001 standard and the European foundation for quality management (EFQM) model on improving hospital performance. Evidence Acquisition: PubMed, Embase and the Cochrane Library databases were searched. In addition, Elsevier and Springer were searched as main publishers in the field of health sciences. We included empirical studies with any design that had used ISO 9001 or the EFQM model to improve the quality of healthcare. Data were collected and tabulated into a data extraction sheet that was specifically designed for this study. The collected data included authors’ names, country, year of publication, intervention, improvement aims, setting, length of program, study design, and outcomes. Results: Seven out of the 121 studies that were retrieved met the inclusion criteria. Three studies assessed the EFQM model and four studies assessed the ISO 9001 standard. Use of the EFQM model increased the degree of patient satisfaction and the number of hospital admissions and reduced the average length of stay, the delay on the surgical waiting list, and the number of emergency re-admissions. ISO 9001 also increased the degree of patient satisfaction and patient safety, increased cost-effectiveness, improved the hospital admissions process, and reduced the percentage of unscheduled returns to the hospital. Conclusions: Generally, there is a lack of robust and high quality empirical evidence regarding the effects of ISO 9001 and the EFQM model on the quality care provided by and the performance of hospitals. However, the limited evidence shows that ISO 9001 and the EFQM model might improve hospital performance. PMID:26756012

An Agile Systems Engineering Process: The Missing Link?

DTIC Science & Technology

2011-05-01

has a num- ber of standards available such as ISO 12207 , ISO 9001 and the Capability Maturity Model Integrated (CMMI®) [24,25,26]. The CMMI was a...addressing activities throughout the products lifecycle [24]. ISO 12207 “contains processes, activities and tasks that are to be applied during...the acquisition of a system that contains software” [26]. A limitation identified within ISO 12207 is that it does not specify details on how to

CrossTalk: The Journal of Defense Software Engineering. Volume 20, Number 3, March 2007

DTIC Science & Technology

2007-03-01

Capability Maturity Model ® Integration (CMMI®). CMU Software Engineering Institute <www.sei.cmu.edu/cmmi>. 5. ISO /IEC 27001 :2005. Information Security...international standards bodies – International Organization for Standardi- zation ( ISO ) and International Electro- technical Commission (IEC) – are working on a...number of projects that affect soft- ware security: • The ISO Technical Management Board (TMB) performs strategic planning and coordination for ISO

49 CFR 173.469 - Tests for special form Class 7 (radioactive) materials.

Code of Federal Regulations, 2010 CFR

2010-10-01

... prescribed in the International Organization for Standardization document ISO 9978-1992(E): “Radiation... not less than 90%. (v) The process in paragraphs (c)(2)(i), (c)(2)(ii), and (c)(2)(iii) of this... International Organization for Standardization document ISO 2919-1980(e), “Sealed Radioactive Sources...

77 FR 16036 - Guidance for Industry, Third Parties and Food and Drug Administration Staff; Medical Device ISO...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-19

... comments to the Division of Dockets Management (HFA-305), Food and Drug Administration, 5630 Fishers Lane... Organization for Standardization (ISO) 13485:2003 ``Medical devices--Quality management systems--Requirements... management systems--Requirements for regulatory purposes,'' (ISO 13485:2003) or a national adoption of this...

The Strengths and Weaknesses of ISO 9000 in Vocational Education

ERIC Educational Resources Information Center

Bevans-Gonzales, Theresa L.; Nair, Ajay T.

2004-01-01

ISO 9000 is a set of quality standards that assists an organization to identify, correct and prevent errors, and to promote continual improvement. Educational institutions worldwide are implementing ISO 9000 as they face increasing external pressure to maintain accountability for funding. Similar to other countries, in the United States vocational…

Synthesis and low temperature characterization of iso-oleic ester derivatives

USDA-ARS?s Scientific Manuscript database

Three new iso-oleic ester derivatives (i.e., isopropyl esters (IOA-iPrE), n-butyl esters (IOA-n-BuE), and 2-ethylhexyl esters (IOA-2-EHE)) were synthesized from iso-oleic acid (IOA) using a standard esterification method. These esterified alcohols were chosen because of their bulky and branched-cha...

Organizational leadership: A study on the affects of certification to International Organization for Standardization (ISO)

NASA Astrophysics Data System (ADS)

Cowart, Jewel S.

Compliance to requirements of ISO is an important leadership problem for the International Aerospace Quality Group (IAQG) and the Aviation, Space and Defense (AS&D) companies. Furthermore, the IAQG seeks to understand the valuation of ISO/AS9100 requirements (2009), audit practices, management functions, business performance, customer satisfaction, and potential future concepts for the standard to assure quality. Since the release of the AS9100C total certification growth surpassed 1,100,000 organizations in 2010 with ISO 9001 series adoption and implementation governing business operations (ASQ, 2012b; ISO, 2011; Bernardo, Llach, & Marimon, 2011). Historians such as Crosby, Juran, Deming, and others established the foundation for quality assurance. Several researchers explored the issues which complicate overall benefits of ISO certification (Iwaro & Mwasha, 2012; Karthi et al., 2012; Sampaio et al., 2009). This study examined the effects on AS&D industries from ISO compliance to identify the implications (of ever-changing requirements) through an online survey of 15,000 practitioners. The research illuminated how ISO affects AS&D industries with current and future requirements for certification. The data showed that 75% of survey respondents report implementation of the AS9100C requirements still has benefits that outweigh the cost. Findings suggest that AS&D industries perceive significant value in the AS9100C document as part of the overall ISO 9000 series. In general, the comments from the survey can provide insight into the affects of ISO certification. The study concludes by recommending continued research to learn of further impacts from ISO certification within AS&D industries to improve the AS9100 document requirements for quality management systems.

Review of Special Standards in Quality Management Systems Audits in Automotive Production

NASA Astrophysics Data System (ADS)

Šurinová, Yulia

2013-12-01

Quality management systems (QMS) in automotive industry generally have several differences in comparison with other industrial branches. Different customers have their own specific requirements, including requirements for quality audits. Audits are one of the coretools of quality management to make the PDCA (Plan - Do - Check - Act) cycle work. As a matter of fact, compliance with ISO/TS 16949:2009 requirements is a condition for supplying the automotive industry. However, there are some standards which co-exist together with the ISO 9001 based management systems and technical specification for QMS in automotive ISO/TS16949. Which are those specific standards in automotive industry and what standard to use and why - those are the questions to be answered in this paper. The aim of the paper is to review what standards are used for audits implementation in automotive industry in the Slovak Republic, and why the organizations keep following those "extra" standards even if certification for ISO/TS 16949 is required by all the car makers. The paper is structured as follows: after short introduction to the topic and related terms, presented is our methodology. . In the third section, the achieved results are discussed. And finally, the principal findings of the paper, limitations and conclusions are presented.

A Structure Standard for Archival Context: EAC-CPF Is Here

ERIC Educational Resources Information Center

Dryden, Jean

2010-01-01

The archival community's new descriptive standard, "Encoded Archival Context" for Corporate Bodies, Persons, and Families (EAC-CPF), supports the sharing of descriptions of records creators and is a significant addition to the suite of standards for archival description. EAC-CPF is a data structure standard similar to its older sibling EAD…

Validation of a smartphone auscultatory blood pressure kit Accutension XYZ-110 in adults according to the ANSI/AAMI/ISO 81060-2: 2013 standard.

PubMed

Chu, Guang; Zhang, Zhi; Xu, Mengdan; Huang, Daini; Dai, Qiuyan

2017-10-01

The aim of this study was to validate the accuracy of the Accutension XYZ-110 blood pressure (BP) kit according to the American National Standards Institute/Association for the Advancement of Medical Instrumentation/International Organization for Standardization (ANSI/AAMI/ISO) 81060-2:2013 standard. Systolic blood pressure (SBP) and diastolic blood pressure (DBP) were measured simultaneously on the same arm in 85 Chinese adults (female : male=48 : 37) with a mean age of 43.2 years using the mercury sphygmomanometer (two observers) and the Accutension XYZ-110 device (one supervisor). The ANSI/AAMI/ISO 81060-2:2013 standard for the validation of BP-measuring devices in adults was followed precisely. A total of 255 comparison pairs were obtained for analysis. The mean device-observer difference in the 255 separate BP data pairs was 2.45±2.24 mmHg for SBP and 0.69±2.09 mmHg for DBP. The data were in accordance with the criterion 1 of the ANSI/AAMI/ISO 81060-2:2013 standard requirements (≤5±8 mmHg). In addition, the mean device-observer difference of the 85 participants was 2.45±1.47 mmHg for SBP and 0.69±1.36 mmHg for DBP. The device accuracy also fulfilled the criterion 2 with the SD of less than or equal to 6.47 for SBP and less than or equal to 6.90 mmHg for DBP. The Accutension XYZ-110 BP kit fulfilled the requirements of the ANSI/AAMI/ISO 81060-2:2013 standard, and hence could be recommended for both clinical and self/home BP measurement in adults.

Flammability of gas mixtures. Part 1: fire potential.

PubMed

Schröder, Volkmar; Molnarne, Maria

2005-05-20

International and European dangerous substances and dangerous goods regulations refer to the standard ISO 10156 (1996). This standard includes a test method and a calculation procedure for the determination of the flammability of gases and gas mixtures in air. The substance indices for the calculation, the so called "Tci values", which characterise the fire potential, are provided as well. These ISO Tci values are derived from explosion diagrams of older literature sources which do not take into account the test method and the test apparatus. However, since the explosion limits are influenced by apparatus parameters, the Tci values and lower explosion limits, given by the ISO tables, are inconsistent with those measured according to the test method of the same standard. In consequence, applying the ISO Tci values can result in wrong classifications. In this paper internationally accepted explosion limit test methods were evaluated and Tci values were derived from explosion diagrams. Therefore, an "open vessel" method with flame propagation criterion was favoured. These values were compared with the Tci values listed in ISO 10156. In most cases, significant deviations were found. A detailed study about the influence of inert gases on flammability is the objective of Part 2.

System Accuracy Evaluation of Four Systems for Self-Monitoring of Blood Glucose Following ISO 15197 Using a Glucose Oxidase and a Hexokinase-Based Comparison Method.

PubMed

Link, Manuela; Schmid, Christina; Pleus, Stefan; Baumstark, Annette; Rittmeyer, Delia; Haug, Cornelia; Freckmann, Guido

2015-04-14

The standard ISO (International Organization for Standardization) 15197 is widely accepted for the accuracy evaluation of systems for self-monitoring of blood glucose (SMBG). Accuracy evaluation was performed for 4 SMBG systems (Accu-Chek Aviva, ContourXT, GlucoCheck XL, GlucoMen LX PLUS) with 3 test strip lots each. To investigate a possible impact of the comparison method on system accuracy data, 2 different established methods were used. The evaluation was performed in a standardized manner following test procedures described in ISO 15197:2003 (section 7.3). System accuracy was assessed by applying ISO 15197:2003 and in addition ISO 15197:2013 criteria (section 6.3.3). For each system, comparison measurements were performed with a glucose oxidase (YSI 2300 STAT Plus glucose analyzer) and a hexokinase (cobas c111) method. All 4 systems fulfilled the accuracy requirements of ISO 15197:2003 with the tested lots. More stringent accuracy criteria of ISO 15197:2013 were fulfilled by 3 systems (Accu-Chek Aviva, ContourXT, GlucoMen LX PLUS) when compared to the manufacturer's comparison method and by 2 systems (Accu-Chek Aviva, ContourXT) when compared to the alternative comparison method. All systems showed lot-to-lot variability to a certain degree; 2 systems (Accu-Chek Aviva, ContourXT), however, showed only minimal differences in relative bias between the 3 evaluated lots. In this study, all 4 systems complied with the evaluated test strip lots with accuracy criteria of ISO 15197:2003. Applying ISO 15197:2013 accuracy limits, differences in the accuracy of the tested systems were observed, also demonstrating that the applied comparison method/system and the lot-to-lot variability can have a decisive influence on accuracy data obtained for a SMBG system. © 2015 Diabetes Technology Society.

Establishing an ISO 10001-based promise in inpatients care.

PubMed

Khan, Mohammad Ashiqur Rahman; Karapetrovic, Stanislav

2015-01-01

The purpose of this paper is to explore ISO 10001:2007 in planning, designing and developing a customer satisfaction promise (CSP) intended for inpatients care. Through meetings and interviews with research participants, who included a program manager, unit managers and registered nurses, information about potential promises and their implementation was obtained and analyzed. A number of promises were drafted and one was finally selected to be developed as a CSP. Applying the standard required adaptation and novel interpretation. Additionally, ISO 10002:2004 (Clause 7) was used to design the feedback handling activities. A promise initially chosen for development turned out to be difficult to implement, experience that helped in selecting and developing the final promise. Research participants found the ISO 10001-based method useful and comprehensible. This paper presents a specific health care example of how to adapt a standard's guideline in establishing customer promises. The authors show how a promise can be used in alleviating an existing issue (i.e. communication between carers and patients). The learning can be beneficial in various health care settings. To the knowledge, this paper shows the first example of applying ISO 10001:2007 in a health care case. A few activities suggested by the standard are further detailed, and a new activity is introduced. The integrated use of ISO 10001:2007 and 10002:2004 is presented and how one can be "augmented" by the other is demonstrated.

Report of Official Foreign Travel to Germany, May 16-June 1, 2001

DOE Office of Scientific and Technical Information (OSTI.GOV)

J. D. Mason

2001-06-18

The Department of Energy (DOE) and associated agencies have moved rapidly toward electronic production, management, and dissemination of scientific and technical information. The World-Wide Web (WWW) has become a primary means of information dissemination. Electronic commerce (EC) is becoming the preferred means of procurement. DOE, like other government agencies, depends on and encourages the use of international standards in data communications. Like most government agencies, DOE has expressed a preference for openly developed standards over proprietary designs promoted as ''standards'' by vendors. In particular, there is a preference for standards developed by organizations such as the International Organization for Standardizationmore » (ISO) and the American National Standards Institute (ANSI) that use open, public processes to develop their standards. Among the most widely adopted international standards is the Standard Generalized Markup Language (SGML, ISO 8879:1986, FIPS 152), to which DOE long ago made a commitment. Besides the official commitment, which has resulted in several specialized projects, DOE makes heavy use of coding derived from SGML: Most documents on the WWW are coded in HTML (Hypertext Markup Language), which is an application of SGML. The World-Wide Web Consortium (W3C), with the backing of major software houses like Adobe, IBM, Microsoft, Netscape, Oracle, and Sun, is promoting XML (eXtensible Markup Language), a class of SGML applications, for the future of the WWW and the basis for EC. In support of DOE's use of these standards, I have served since 1985 as Chairman of the international committee responsible for SGML and related standards, ISO/IEC JTC1/SC34 (SC34) and its predecessor organizations. During my May 2001 trip, I chaired the spring 2001 meeting of SC34 in Berlin, Germany. I also attended XML Europe 2001, a major conference on the use of SGML and XML sponsored by the Graphic Communications Association (GCA), and chaired a meeting of the International SGML/XML Users' Group (ISUG). In addition to the widespread use of the WWW among DOE's plants and facilities in Oak Ridge and among DOE sites across the nation, there have been several past and present SGML- and XML-based projects at the Y-12 National Security Complex (Y-12). Our local project team has done SGML and XML development at Y-12 and Oak Ridge National Laboratory (ORNL) since the late 1980s. SGML is a component of the Weapons Records Archiving and Preservation (WRAP) project at Y-12 and is the format for catalog metadata chosen for weapons records by the Nuclear Weapons Information Group (NWIG). The ''Ferret'' system for automated classification analysis uses XML to structure its knowledge base. The Ferret team also provides XML consulting to OSTI and DOE Headquarters, particularly the National Nuclear Security Administration (NNSA). Supporting standards development allows DOE and Y-12 the opportunity both to provide input into the process and to benefit from contact with some of the leading experts in the subject matter. Oak Ridge has been for some years the location to which other DOE sites turn for expertise in SGML, XML, and related topics.« less

Transportation Systems: Critical Infrastructure and Key Resources Sector-Specific Plan as Input to the National Infrastructure Protection Plan

DTIC Science & Technology

2007-05-01

partners will be encouraged to use the assessment methodologies referenced above, or ISO 27001 and ISO 17799, which are intended to be used together...the Information Systems Audit and Control Association (ISACA), the International Organization for Standardization ( ISO ), and a number of other...programs are aligned with NCSD’s goals for the IT sector and follow best practices developed by NIST and the ISO . The cyber protective programs

Standard-compliant real-time transmission of ECGs: harmonization of ISO/IEEE 11073-PHD and SCP-ECG.

PubMed

Trigo, Jesús D; Chiarugi, Franco; Alesanco, Alvaro; Martínez-Espronceda, Miguel; Chronaki, Catherine E; Escayola, Javier; Martínez, Ignacio; García, José

2009-01-01

Ambient assisted living and integrated care in an aging society is based on the vision of the lifelong Electronic Health Record calling for HealthCare Information Systems and medical device interoperability. For medical devices this aim can be achieved by the consistent implementation of harmonized international interoperability standards. The ISO/IEEE 11073 (x73) family of standards is a reference standard for medical device interoperability. In its Personal Health Device (PHD) version several devices have been included, but an ECG device specialization is not yet available. On the other hand, the SCP-ECG standard for short-term diagnostic ECGs (EN1064) has been recently approved as an international standard ISO/IEEE 11073-91064:2009. In this paper, the relationships between a proposed x73-PHD model for an ECG device and the fields of the SCP-ECG standard are investigated. A proof-of-concept implementation of the proposed x73-PHD ECG model is also presented, identifying open issues to be addressed by standards development for the wider interoperability adoption of x73-PHD standards.

The most common nonconformities encountered during the assessments of medical laboratories in Hong Kong using ISO 15189 as accreditation criteria

PubMed Central

Ho, Bella; Ho, Eric

2012-01-01

Introduction: ISO 15189 was a new standard published in 2003 for accrediting medical laboratories. We believe that some requirements of the ISO 15189 standard are especially difficult to meet for majority of laboratories. The aim of this article was to present the frequency of nonconformities to requirements of the ISO 15189 accreditation standard, encountered during the assessments of medical laboratories in Hong Kong, during 2004 to 2009. Materials and methods: Nonconformities reported in assessments based on ISO 15189 were analyzed in two periods – from 2004 to 2006 and in 2009. They are categorized according to the ISO 15189 clause numbers. The performance of 27 laboratories initially assessed between 2004 and 2006 was compared to their performance in the second reassessment in 2009. Results: For management requirements, nonconformities were most frequently reported against quality management system, quality and technical records and document control; whereas for technical requirements, they were reported against examination procedures, equipment, and assuring quality of examination procedures. There was no major difference in types of common nonconformities reported in the two study periods. The total number of nonconformities reported in the second reassessment of 27 laboratories in 2009 was almost halved compared to their initial assessments. The number of significant nonconformities per laboratory significantly decreased (P = 0.023). Conclusion: Similar nonconformities were reported in the two study periods though the frequency encountered decreased. The significant decrease in number of significant nonconformities encountered in the same group of laboratories in the two periods substantiated that ISO15189 contributed to quality improvement of accredited laboratories. PMID:22838190

Minutes. Accredited Standards Committee on Noise, S12. U.S. Tag for ISO/ TC 43/S1 Noise and ISO/TC 94/SC12 Hearing Protection, Held in Denver, Colorado on 7 October 1993

DTIC Science & Technology

1993-10-07

study at a special session sponsored by the Technical Committee on Noise, on Tuesday afternoon at the Denver, ASA. On Thursday of ASA week (October 7...COMMITTEE ON NOISE. S12 U.S. TAG FOR ISO/TC 43/SCI NOISE and ISO/TC 94/SC1 2 HEARING PP"OTECTION Denver, Colorado 7 October 1993 2As,,,MNUTES 94-03976 )4 2...r AVAIL BRENIG. D. P I, ’,I-pho’e (2? 2428 0373 STANDARDS MANAGER r,4 f’A, (2121 24A0146 S1 2/284 MINUTES OF S12 MEETING HELD IN DENVER, COLORADO, ON

INTERNATIONAL REPORTS: New International Standards for Quantities and Units

NASA Astrophysics Data System (ADS)

Thor, A. J.

1994-01-01

Each coherent system of units is based on a system of quantities in such a way that the equations between the numerical values expressed in coherent units have exactly the same form, including numerical factors, as the corresponding equations between the quantities. The highest international body responsible for the International System of Units (SI) is the Conférence Générale des Poids et Mesures (CGPM). However, the CGPM is not concerned with quantities or systems of quantities. That question lies within the scope of Technical Committee number twelve of the International Organization for Standardization (ISO/TC 12). Quantities, units, symbols, conversion factors. To fulfil its responsibility, ISO/TC 12 has prepared the International Standard ISO 31, Quantities and Units, which consists of fourteen parts. The new editions of the different parts of the International Standard are briefly presented here.

16 CFR Figure 2 to Part 1203 - ISO Headform-Basic, Reference, and Median Planes

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false ISO Headform-Basic, Reference, and Median Planes 2 Figure 2 to Part 1203 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR BICYCLE HELMETS Pt. 1203, Fig. 2 Figure 2 to Part 1203—ISO...

Systems Security Engineering

DTIC Science & Technology

2010-08-22

Commission (IEC). “Information technology — Security techniques — Code of practice for information security management ( ISO /IEC 27002 ...Information technology — Security techniques — Information security management systems —Requirements ( ISO /IEC 27002 ),”, “Information technology — Security...was a draft ISO standard on Systems and software engineering, Systems and software assurance [18]. Created by systems engineers for systems

The ISO 50001 Impact Estimator Tool (IET 50001 V1.1.4) - User Guide and Introduction to the ISO 50001 Impacts Methodology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Therkelsen, Peter L.; Rao, Prakash; Aghajanzadeh, Arian

ISO 50001-Energy management systems – Requirements with guidance for use, is an internationally developed standard that provides organizations with a flexible framework for implementing an energy management system (EnMS) with the goal of continual energy performance improvement. The ISO 50001 standard was first published in 2011 and has since seen growth in the number of certificates issued around the world, primarily in the industrial (agriculture, manufacturing, and mining) and service (commercial) sectors. Policy makers in many regions and countries are looking to or are already using ISO 50001 as a basis for energy efficiency, carbon reduction, and other energy performancemore » improvement schemes. The Impact Estimator Tool 50001 (IET 50001 Tool) is a computational model developed to assist researchers and policy makers determine the potential impact of ISO 50001 implementation in the industrial and service (commercial) sectors for a given region or country. The IET 50001 Tool is based upon a methodology initially developed by the Lawrence Berkeley National Laboratory that has been improved upon and vetted by a group of international researchers. By using a commonly accepted and transparent methodology, users of the IET 50001 Tool can easily and clearly communicate the potential impact of ISO 50001 for a region or country.« less

International Organization of Standardization (ISO) and Cambridge Filter Test (CFT) Smoking Regimen Data Comparisons in Tobacco Product Marketing Applications.

PubMed

Chae, Changyu; Walters, Matthew J; Holman, Matthew R

2017-07-01

We investigated the differences in TNCO (tar, nicotine, and carbon monoxide) smoke yields generated under the International Organization of Standardization (ISO) and Federal Trade Commission (FTC) Cambridge Filter Test (CFT) smoking regimens. Twenty-nine commercial cigarette products from the US marketplace were acquired in 2015 and tested by measuring the TNCO smoke yields generated under these 2 nonintense smoking regimens. Data obtained demonstrated a linear relationship between the TNCO yields produced under the 2 smoking regimens (R 2 > 0.99). TNCO yields produced by each product were higher under the CFT smoking regimen than the ISO smoking regimen. We found that tar, nicotine, and carbon monoxide yields were consistently 10% to 13% higher under the CFT smoking regimen than under the ISO smoking regimen. This strong correlation indicates that the 2 smoking regimens can be used to apply a correlation correction to CFT TNCO data and allow its comparison to ISO TNCO data in tobacco product marketing applications.

Department of Defense Standard Family of Tactical Shelters (Rigid/Soft/Hybrid)

DTIC Science & Technology

2012-05-01

01-092-0892 Shelter, Electrical Equipment, S-280(C)/G, EMI Shielded 5411-01-304-3069 Shelter, Electrical Equipment, Lightweight, S-788/G Type I 5411...Electrical Equipment, S-250/G, Unshielded 5411-00-999-4935 Shelter, Electrical Equipment, S-250/G, EMI Shielded 5411-00-489-6076 MARINE CORPS (LEGACY) ISO...10 Foot, General Purpose 5411-01-287-4341 ISO, 10 Foot, EMI Shielded 5411-01-206-6079 ISO, 20 Foot, General Purpose 5411-01-209-3451 ISO, 20 Foot

ISO Key Project: Exploring the Full Range of Quasar/Agn Properties

NASA Technical Reports Server (NTRS)

Wilkes, Belinda; Oliversen, Ronald J. (Technical Monitor)

2003-01-01

While most of the work on this program has been completed, as previously reported, the portion of the program dealing with the subtopic of ISO LWS data analysis and reduction for the LWS Extragalactic Science Team and its leader, Dr. Howard Smith, is still active. This program in fact continues to generate results, and newly available computer modeling has extended the value of the datasets. As a result the team requests a one-year no-cost extension to this program, through 31 December 2004. The essence of the proposal is to perform ISO spectroscopic studies, including data analysis and modeling, of star-formation regions using an ensemble of archival space-based data from the Infrared Space Observatory's Long Wavelength Spectrometer and Short Wavelength Spectrometer, but including as well some other spectroscopic databases. Four kinds of regions are considered in the studies: (1) disks around more evolved objects; (2) young, low or high mass pre-main sequence stars in star-formation regions; (3) star formation in external, bright IR galaxies; and (4) the galactic center. One prime focus of the program is the OH lines in the far infrared. The program has the following goals: 1) Refine the data analysis of ISO observations to obtain deeper and better SNR results on selected sources. The ISO data itself underwent 'pipeline 10' reductions in early 2001, and additional 'hands-on data reduction packages' were supplied by the ISO teams in 2001. The Fabry-Perot database is particularly sensitive to noise and slight calibration errors; 2) Model the atomic and molecular line shapes, in particular the OH lines, using revised Monte-Carlo techniques developed by the SWAS team at the Center for Astrophysics; 3) Attend scientific meetings and workshops; 4) Perform E&PO activities related to infrared astrophysics and/or spectroscopy.

ISO 9000 quality standards: a model for blood banking?

PubMed

Nevalainen, D E; Lloyd, H L

1995-06-01

The recent American Association of Blood Banks publications Quality Program and Quality Systems in the Blood Bank and Laboratory Environment, the FDA's draft guidelines, and recent changes in the GMP regulations all discuss the benefits of implementing quality systems in blood center and/or manufacturing operations. While the medical device GMPs in the United States have been rewritten to accommodate a quality system approach similar to ISO 9000, the Center for Biologics Evaluation and Research of the FDA is also beginning to make moves toward adopting "quality systems audits" as an inspection process rather than using the historical approach of record reviews. The approach is one of prevention of errors rather than detection after the fact (Tourault MA, oral communication, November 1994). The ISO 9000 series of standards is a quality system that has worldwide scope and can be applied in any industry or service. The use of such international standards in blood banking should raise the level of quality within an organization, among organizations on a regional level, within a country, and among nations on a worldwide basis. Whether an organization wishes to become registered to a voluntary standard or not, the use of such standards to become ISO 9000-compliant would be a move in the right direction and would be a positive sign to the regulatory authorities and the public that blood banking is making a visible effort to implement world-class quality systems in its operations. Implementation of quality system standards such as the ISO 9000 series will provide an organized approach for blood banks and blood bank testing operations. With the continued trend toward consolidation and mergers, resulting in larger operational units with more complexity, quality systems will become even more important as the industry moves into the future.(ABSTRACT TRUNCATED AT 250 WORDS)

Calibration of laser vibrometers at frequencies up to 100 kHz and higher

NASA Astrophysics Data System (ADS)

Silva Pineda, Guillermo; von Martens, Hans-Jürgen; Rojas, Sergio; Ruiz, Arturo; Muñiz, Lorenzo

2008-06-01

Manufacturers and users of laser vibrometers exploit the wide frequency and intensity ranges of laser techniques, ranging over many decades (e.g., from 0.1 Hz to 100 MHz). Traceability to primary measurement standards is demanded over the specified measurement ranges of any measurement instrumentation. As the primary documentary standard ISO 16063-11 for the calibration of vibration transducers is restricted to 10 kHz, a new international standard for the calibration of laser vibrometers, ISO 16063-41, is under development. The current stage of the 2nd Committee Draft (CD) of the ISO standard specifies calibration methods for frequencies from 0.4 Hz to 50 kHz which does not meet the demand for providing traceability at higher frequencies. New investigations will be presented which demonstrate the applicability of the laser interferometer methods specified in ISO 16063-11 and in the 2nd CD also at higher frequencies of 100 kHz and beyond. The three standard methods were simultaneously used for vibration displacement and acceleration measurements up to 100 kHz, and a fourth high-accuracy method has been developed and used. Their results in displacement and acceleration measurements deviated by less than 1 % from each other at vibration displacement amplitudes in the order of 100 nm. In addition to the three interferometer methods specified in ISO 16063-11 and 16063-15, and in the 2nd Committee Draft of 16063-41 as well, measurement results will be presented. Examples of laser vibrometer calibrations will bedemonstrated. Further investigations are aimed

Evaluating Software Assurance Knowledge and Competency of Acquisition Professionals

DTIC Science & Technology

2014-10-01

of ISO 12207 -2008, both internationally and in the United States [7]. That standard documents a comprehensive set of activities and supporting...grows, organizations must ensure that their procurement agents acquire high quality, secure software. ISO 12207 and the Software Assurance Competency...cyberattacks grows, organizations must ensure that their procurement agents acquire high quality, secure software. ISO 12207 and the Software Assurance

Revision of ISO 15859 Aerospace Fluid Standards

NASA Technical Reports Server (NTRS)

Greene, Benjamin; McClure, Mark B.

2012-01-01

A detailed review of ISO 15859 "Space Systems - Fluid Characteristics, Sampling and Test Methods" was performed An approach to revising Parts 1-9 and 11-13 was developed and concurred by the NASA Technical Standards Program Office. The approach was to align them with the highest level source documents, and not to program-specific requirements. The updated documents were prepared and presented.

Strength evaluation of prosthetic check sockets, copolymer sockets, and definitive laminated sockets.

PubMed

Gerschutz, Maria J; Haynes, Michael L; Nixon, Derek; Colvin, James M

2012-01-01

A prosthesis encounters loading through forces and torques exerted by the person with amputation. International Organization for Standardization (ISO) standard 10328 was designed to test most lower-limb prosthetic components. However, this standard does not include prosthetic sockets. We measured static failure loads of prosthetic sockets using a modified ISO 10328 and then compared them with the criteria set by this standard for other components. Check socket (CS) strengths were influenced by thickness, material choice, and fabrication method. Copolymer socket (CP) strengths depended on thickness and fabrication methods. A majority of the CSs and all of the CPs failed to pass the ISO 10328 ductile loading criterion. In contrast, the strengths of definitive laminated sockets (DLs) were influenced more by construction material and technique. A majority of the DLs failed to pass the ISO 10328 brittle loading criterion. Analyzing prosthetic sockets from a variety of facilities demonstrated that socket performance varies considerably between and within facilities. The results from this article provide a foundation for understanding the quality of prosthetic sockets, some insight into possible routes for improving the current care delivered to patients, and a comparative basis for future technology.

Quality management in European screening laboratories in blood establishments: A view of current approaches and trends.

PubMed

Pereira, Paulo; Westgard, James O; Encarnação, Pedro; Seghatchian, Jerard; de Sousa, Gracinda

2015-04-01

The screening laboratory has a critical role in the post-transfusion safety. The success of its targets and efficiency depends on the management system used. Even though the European Union directive 2002/98/EC requires a quality management system in blood establishments, its requirements for screening laboratories are generic. Complementary approaches are needed to implement a quality management system focused on screening laboratories. This article briefly discusses the current good manufacturing practices and good laboratory practices, as well as the trends in quality management system standards. ISO 9001 is widely accepted in some European Union blood establishments as the quality management standard, however this is not synonymous of its successful application. The ISO "risk-based thinking" is interrelated with the quality risk-management process of the EuBIS "Standards and criteria for the inspection of blood establishments". ISO 15189 should be the next step on the quality assurance of a screening laboratory, since it is focused on medical laboratory. To standardize the quality management systems in blood establishments' screening laboratories, new national and European claims focused on technical requirements following ISO 15189 is needed. Copyright © 2015 Elsevier Ltd. All rights reserved.

Manufacturing of microcomponents in a research institute under DIN EN ISO 9001

NASA Astrophysics Data System (ADS)

Maas, Dieter; Karl, Bernhard; Saile, Volker; Schulz, Joachim

2000-08-01

The Institute for Microstructure Technology at Forschungszentrum Karlsruhe has implemented a rigorous quality management system and was certified according to the DIN ISO EN 9001 standard in January 2000.

ISO 50001 for US Commercial Buildings - Current Status and Opportunities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Jingjing; Sheaffer, Paul

''ISO 50001: 2011 Energy management systems – Requirements with guidance for use'' is a voluntary International Standard which provides organizations a proven framework to manage energy and continuously improve their energy performance. Implementing ISO 50001 in the commercial building sector has its unique opportunities and challenges in comparison with the industrial sector. The energy footprint of a portfolio of commercial buildings can be just as significant as a large industrial facility in comparison. There are many energy-saving opportunities in commercial buildings that can be addressed without capital investments, and the perceived risks for making energy improvements can be lower thanmore » in the industrial sector. In addition, the energy-consuming systems in commercial buildings are limited in types and have many similarities across buildings, which makes it much easier to standardize many ISO 50001 required processes, 5 procedures and documents to simplify implementation. There are also some sector-unique challenges, such as less familiar with ISO systems and the certification process. Another challenge arises from the complexity in some buildings’ ownership, tenancy, and O&M responsibilities. This whitepaper discusses these opportunities and issues in detail. The paper also recommends the characteristics of organizations in the commercial building sector that can benefit the most from adopting the ISO 50001 standard – namely the “suitable market”. Eight segments (education, food sales, retail, inpatient health care, hospitality, office buildings, laboratories and data centers) within the commercial building sector are highlighted.« less

Metrology for hydrogen energy applications: a project to address normative requirements

NASA Astrophysics Data System (ADS)

Haloua, Frédérique; Bacquart, Thomas; Arrhenius, Karine; Delobelle, Benoît; Ent, Hugo

2018-03-01

Hydrogen represents a clean and storable energy solution that could meet worldwide energy demands and reduce greenhouse gases emission. The joint research project (JRP) ‘Metrology for sustainable hydrogen energy applications’ addresses standardisation needs through pre- and co-normative metrology research in the fast emerging sector of hydrogen fuel that meet the requirements of the European Directive 2014/94/EU by supplementing the revision of two ISO standards that are currently too generic to enable a sustainable implementation of hydrogen. The hydrogen purity dispensed at refueling points should comply with the technical specifications of ISO 14687-2 for fuel cell electric vehicles. The rapid progress of fuel cell technology now requires revising this standard towards less constraining limits for the 13 gaseous impurities. In parallel, optimized validated analytical methods are proposed to reduce the number of analyses. The study aims also at developing and validating traceable methods to assess accurately the hydrogen mass absorbed and stored in metal hydride tanks; this is a research axis for the revision of the ISO 16111 standard to develop this safe storage technique for hydrogen. The probability of hydrogen impurity presence affecting fuel cells and analytical techniques for traceable measurements of hydrogen impurities will be assessed and new data of maximum concentrations of impurities based on degradation studies will be proposed. Novel validated methods for measuring the hydrogen mass absorbed in hydrides tanks AB, AB2 and AB5 types referenced to ISO 16111 will be determined, as the methods currently available do not provide accurate results. The outputs here will have a direct impact on the standardisation works for ISO 16111 and ISO 14687-2 revisions in the relevant working groups of ISO/TC 197 ‘Hydrogen technologies’.

Intraoperative CT in the assessment of posterior wall acetabular fracture stability.

PubMed

Cunningham, Brian; Jackson, Kelly; Ortega, Gil

2014-04-01

Posterior wall acetabular fractures that involve 10% to 40% of the posterior wall may or may not require an open reduction and internal fixation. Dynamic stress examination of the acetabular fracture under fluoroscopy has been used as an intraoperative method to assess joint stability. The aim of this study was to demonstrate the value of intraoperative ISO computed tomography (CT) examination using the Siemens ISO-C imaging system (Siemens Corp, Malvern, Pennsylvania) in the assessment of posterior wall acetabular fracture stability during stress examination under anesthesia. In 5 posterior wall acetabular fractures, standard fluoroscopic images (including anteroposterior pelvis and Judet radiographs) with dynamic stress examinations were compared with the ISO-C CT imaging system to assess posterior wall fracture stability during stress examination. After review of standard intraoperative fluoroscopic images under dynamic stress examination, all 5 cases appeared to demonstrate posterior wall stability; however, when the intraoperative images from the ISO-C CT imaging system demonstrated that 1 case showed fracture instability of the posterior wall segment during stress examination, open reduction and internal fixation was performed. The use of intraoperative ISO CT imaging has shown an initial improvement in the surgeon's ability to assess the intraoperative stability of posterior wall acetabular fractures during stress examination when compared with standard fluoroscopic images. Copyright 2014, SLACK Incorporated.

Comparison and Analysis of ISO/IEEE 11073, IHE PCD-01, and HL7 FHIR Messages for Personal Health Devices

PubMed Central

Do, Hyoungho

2018-01-01

Objectives Increasing use of medical devices outside of healthcare facilities inevitably requires connectivity and interoperability between medical devices and healthcare information systems. To this end, standards have been developed and used to provide interoperability between personal health devices (PHDs) and external systems. ISO/IEEE 11073 standards and IHE PCD-01 standard messages have been used the most in the exchange of observation data of health devices. Recently, transmitting observation data using the HL7 FHIR standard has been devised in the name of DoF (Devices on FHIR) and adopted very fast. We compare and analyze these standards and suggest that which standard will work best at the different environments of device usage. Methods We generated each message/resource of the three standards for observed vital signs from blood pressure monitor and thermometer. Then, the size, the contents, and the exchange processes of these messages are compared and analyzed. Results ISO/IEEE 11073 standard message has the smallest data size, but it has no ability to contain the key information, patient information. On the other hand, PCD-01 messages and FHIR standards have the fields for patient information. HL7 DoF standards provide reusing of information unit known as resource, and it is relatively easy to parse DoF messages since it uses widely known XML and JSON. Conclusions ISO/IEEE 11073 standards are suitable for devices having very small computing power. IHE PCD-01 and HL7 DoF messages can be used for the devices that need to be connected to hospital information systems that require patient information. When information reuse is frequent, DoF is advantageous over PCD-01. PMID:29503752

Comparison and Analysis of ISO/IEEE 11073, IHE PCD-01, and HL7 FHIR Messages for Personal Health Devices.

PubMed

Lee, Sungkee; Do, Hyoungho

2018-01-01

Increasing use of medical devices outside of healthcare facilities inevitably requires connectivity and interoperability between medical devices and healthcare information systems. To this end, standards have been developed and used to provide interoperability between personal health devices (PHDs) and external systems. ISO/IEEE 11073 standards and IHE PCD-01 standard messages have been used the most in the exchange of observation data of health devices. Recently, transmitting observation data using the HL7 FHIR standard has been devised in the name of DoF (Devices on FHIR) and adopted very fast. We compare and analyze these standards and suggest that which standard will work best at the different environments of device usage. We generated each message/resource of the three standards for observed vital signs from blood pressure monitor and thermometer. Then, the size, the contents, and the exchange processes of these messages are compared and analyzed. ISO/IEEE 11073 standard message has the smallest data size, but it has no ability to contain the key information, patient information. On the other hand, PCD-01 messages and FHIR standards have the fields for patient information. HL7 DoF standards provide reusing of information unit known as resource, and it is relatively easy to parse DoF messages since it uses widely known XML and JSON. ISO/IEEE 11073 standards are suitable for devices having very small computing power. IHE PCD-01 and HL7 DoF messages can be used for the devices that need to be connected to hospital information systems that require patient information. When information reuse is frequent, DoF is advantageous over PCD-01.

The New world of ';Big Data' Analytics and High Performance Data: A Paradigm shift in the way we interact with very large Earth Observation datasets (Invited)

NASA Astrophysics Data System (ADS)

Purss, M. B.; Lewis, A.; Ip, A.; Evans, B.

2013-12-01

The next decade promises an exponential increase in volumes of open data from Earth observing satellites. The ESA Sentinels, the Japan Meteorological Agency's Himawari 8/9 geostationary satellites, various NASA missions, and of course the many EO satellites planned from China, will produce petabyte scale datasets of national and global significance. It is vital that we develop new ways of managing, accessing and using this ';big-data' from satellites, to produce value added information within realistic timeframes. A paradigm shift is required away from traditional ';scene based' (and labour intensive) approaches with data storage and delivery for processing at local sites, to emerging High Performance Data (HPD) models where the data are organised and co-located with High Performance Computational (HPC) infrastructures in a way that enables users to bring themselves, their algorithms and the HPC processing power to the data. Automated workflows, that allow the entire archive of data to be rapidly reprocessed from raw data to fully calibrated products, are a crucial requirement for the effective stewardship of these datasets. New concepts such as arranging and viewing data as ';data objects' which underpin the delivery of ';information as a service' are also integral to realising the transition into HPD analytics. As Australia's national remote sensing and geoscience agency, Geoscience Australia faces a pressing need to solve the problems of ';big-data', in particular around the 25-year archive of calibrated Landsat data. The challenge is to ensure standardised information can be extracted from the entire archive and applied to nationally significant problems in hazards, water management, land management, resource development and the environment. Ultimately, these uses justify government investment in these unique systems. A key challenge was how best to organise the archive of calibrated Landsat data (estimated to grow to almost 1 PB by the end of 2014) in a way that supports HPD applications yet with the ability to trace each observation (pixel) back to its original satellite acquisition. The approach taken was to develop a multi-dimensional array (a data cube) underpinned by the partitioning the data into tiles, without any temporal aggregation. This allows for flexible spatio-temporal queries of the archive whilst minimising the need to perform geospatial processing just to locate the pixels of interest. Equally important is the development and implementation of international data interoperability standards (such as OGC web services and ISO metadata standards) that will provide advanced access for users to interact with and query the data cube without needing to download any data or to go through specialised data portals. This new approach will vastly improve access to, and the impact of, Australia's Landsat archive holdings.

Meta-audit of laboratory ISO accreditation inspections: measuring the old emperor's clothes.

PubMed

Wilson, Ian G; Smye, Michael; Wallace, Ian J C

2016-02-01

Accreditation to ISO/IEC 17025 is required for EC official food control and veterinary laboratories by Regulation (EC) No. 882/2004. Measurements in hospital laboratories and clinics are increasingly accredited to ISO/IEC 15189. Both of these management standards arose from command and control military standards for factory inspection during World War II. They rely on auditing of compliance and have not been validated internally as assessment bodies require of those they accredit. Neither have they been validated to criteria outside their own ideology such as the Cochrane principles of evidence-based medicine which might establish whether any benefit exceeds their cost. We undertook a retrospective meta-audit over 14 years of internal and external laboratory audits that checked compliance with ISO 17025 in a public health laboratory. Most noncompliances arose solely from clauses in the standard and would not affect users. No effect was likely from 91% of these. Fewer than 1% of noncompliances were likely to have consequences for the validity of results or quality of service. The ISO system of compliance auditing has the performance characteristics of a poor screening test. It adds substantially to costs and generates more noise (false positives) than informative signal. Ethical use of resources indicates that management standards should not be used unless proven to deliver the efficacy, effectiveness, and value required of modern healthcare interventions. © 2015 The Authors. MicrobiologyOpen published by John Wiley & Sons Ltd.

Air kerma to Hp(3) conversion coefficients for a new cylinder phantom for photon reference radiation qualities.

PubMed

Behrens, R

2012-09-01

The International Organization for Standardization (ISO) has issued a standard series on photon reference radiation qualities (ISO 4037). In this series, no conversion coefficients are contained for the quantity personal dose equivalent at a 3 mm depth, H(p)(3). In the past, for this quantity, a slab phantom was recommended as a calibration phantom; however, a cylinder phantom much better approximates the shape of a human head than a slab phantom. Therefore, in this work, the conversion coefficients from air kerma to H(p)(3) for the cylinder phantom are supplied for X- and gamma radiation qualities defined in ISO 4037.

A review of the latest guidelines for NIBP device validation.

PubMed

Alpert, Bruce S; Quinn, David E; Friedman, Bruce A

2013-12-01

The current ISO Standard is accepted as the National Standard in almost every industrialized nation. An overview of the most recently adopted standards is provided. Standards writing groups including the Advancement of Medical Instrumentation Sphygmomanometer Committee and ISO JWG7 are working to expand standardized evaluation methods to include the evaluation of devices intended for use in environments where motion artifact is common. An Association for the Advancement of Medical Instrumentation task group on noninvasive blood pressure measurement in the presence of motion artifact has published a technical information report containing research and standardized methods for the evaluation of blood pressure device performance in the presence of motion artifact.

Experimental investigations and guidelines for PCB design for a fuel injection ECU to meet automotive environmental, EMI/EMC and ESD standards

NASA Astrophysics Data System (ADS)

Kalyankar-Narwade, Supriya; Kumar, C. Ramesh; Patil, Sanjay A.

2017-11-01

Engine Management ECU plays a vital role in controlling different important features related to the engine performance. ECU is an embedded system which includes hardware and firmware platform for control logics. However, it is necessary to verify its smooth performance by its functionality testing in the Electromagnetic environment for approval. If these requirements are not known at earlier stages, then ECU may not fulfil functional requirements during required automotive electronic test standards. Hence, focusing on EMS ECU, this paper highlights hardware, layout and software guidelines for solving problems related with Electromagnetic Interference (EMI) to comply ISO 7637, CISPR 25 standard, Electromagnetic Compatibility (EMC) to comply ISO 11452-4,5 standard, Electrostatic Discharge (ESD) to comply ISO 10605 standard and Environmental Testing to comply standards as per IEC standards. This paper specifies initially the importance, need and guidelines for reducing the EMI effect on PCB i.e. making ECU more electromagnetically compatible as per automotive standards. The guidelines are useful for the designers to avoid pitfalls at the later stage. After mentioned modifications in the paper, ECU successfully passed the requirements for all standard tests.

Situation analysis of occupational and environmental health laboratory accreditation in Thailand.

PubMed

Sithisarankul, Pornchai; Santiyanont, Rachana; Wongpinairat, Chongdee; Silva, Panadda; Rojanajirapa, Pinnapa; Wangwongwatana, Supat; Srinetr, Vithet; Sriratanaban, Jiruth; Chuntutanon, Swanya

2002-06-01

The objective of this study was to analyze the current situation of laboratory accreditation (LA) in Thailand, especially on occupational and environmental health. The study integrated both quantitative and qualitative approaches. The response rate of the quantitative questionnaires was 54.5% (226/415). The majority of the responders was environmental laboratories located outside hospital and did not have proficiency testing. The majority used ISO 9000, ISO/IEC 17025 or ISO/ EEC Guide 25, and hospital accreditation (HA) as their quality system. However, only 30 laboratories were currently accredited by one of these systems. Qualitative research revealed that international standard for laboratory accreditation for both testing laboratory and calibration laboratory was ISO/IEC Guide 25, which has been currently revised to be ISO/IEC 17025. The National Accreditation Council (NAC) has authorized 2 organizations as Accreditation Bodies (ABs) for LA: Thai Industrial Standards Institute, Ministry of Industry, and Bureau of Laboratory Quality Standards, Department of Medical Sciences, Ministry of Public Health. Regarding LA in HA, HA considered clinical laboratory as only 1 of 31 items for accreditation. Obtaining HA might satisfy the hospital director and his management team, and hence might actually be one of the obstacles for the hospital to further improve their laboratory quality system and apply for ISO/IEC 17025 which was more technically oriented. On the other hand, HA may be viewed as a good start or even a pre-requisite for laboratories in the hospitals to further improve their quality towards ISO/IEC 17025. Interviewing the director of NAC and some key men in some large laboratories revealed several major problems of Thailand's LA. Both Thai Industrial Standards Institute and Bureau of Laboratory Quality Standards did not yet obtain Mutual Recognition Agreement (MRA) with other international ABs. Several governmental bodies had their own standards and accreditation systems, and did not accept other bodies' standards and systems. This put a burden to private laboratories because they had to apply and get accredited from several governmental bodies, but still had to apply and get accredited from international ABs especially for those dealing with exports. There were only few calibration laboratories, not enough for supporting the calibration required for the equipment in testing laboratories' LA. Purchasing proficiency testing specimens from abroad was very expensive, and often got into troubles with the customs duty procedures. The authors recommend some strategies and activities to improve laboratory accreditation in Thailand. Improvement in occupational and environmental health laboratories would essentially be beneficial to laboratory accreditation of other areas such as clinical laboratory.

ISO/IEC 17025 laboratory accreditation of NRC Acoustical Standards Program

NASA Astrophysics Data System (ADS)

Wong, George S. K.; Wu, Lixue; Hanes, Peter; Ohm, Won-Suk

2004-05-01

Experience gained during the external accreditation of the Acoustical Standards Program at the Institute for National Measurement Standards of the National Research Council is discussed. Some highlights include the preparation of documents for calibration procedures, control documents with attention to reducing future paper work and the need to maintain documentation or paper trails to satisfy the external assessors. General recommendations will be given for laboratories that are contemplating an external audit in accordance to the requirements of ISO/IEC 17025.

ISO, FGDC, DIF and Dublin Core - Making Sense of Metadata Standards for Earth Science Data

NASA Astrophysics Data System (ADS)

Jones, P. R.; Ritchey, N. A.; Peng, G.; Toner, V. A.; Brown, H.

2014-12-01

Metadata standards provide common definitions of metadata fields for information exchange across user communities. Despite the broad adoption of metadata standards for Earth science data, there are still heterogeneous and incompatible representations of information due to differences between the many standards in use and how each standard is applied. Federal agencies are required to manage and publish metadata in different metadata standards and formats for various data catalogs. In 2014, the NOAA National Climatic data Center (NCDC) managed metadata for its scientific datasets in ISO 19115-2 in XML, GCMD Directory Interchange Format (DIF) in XML, DataCite Schema in XML, Dublin Core in XML, and Data Catalog Vocabulary (DCAT) in JSON, with more standards and profiles of standards planned. Of these standards, the ISO 19115-series metadata is the most complete and feature-rich, and for this reason it is used by NCDC as the source for the other metadata standards. We will discuss the capabilities of metadata standards and how these standards are being implemented to document datasets. Successful implementations include developing translations and displays using XSLTs, creating links to related data and resources, documenting dataset lineage, and establishing best practices. Benefits, gaps, and challenges will be highlighted with suggestions for improved approaches to metadata storage and maintenance.

National Environmental Field Activities Program

DTIC Science & Technology

2011-03-31

holder community. –It is one of a kind! –Written for any type of field sampling  and testing  • Builds of the foundation of  ISO / IEC   17025 ! Why TNI...Why chose the TNI standard and not others – ISO  9000 – ISO / IEC  17020 – ISO  14000 – ASTM, USGS, EPA, Etc. – XXXXXX, XXX or XXXX REDUCE DATA VARIABILITY

So You Want to Be Trustworthy: A Repository's Guide to Taking Reasonable Steps Towards Achieving ISO 16363

NASA Astrophysics Data System (ADS)

Stall, S.

2016-12-01

To be trustworthy is to be reliable, dependable, honest, principled, ethical, incorruptible, and more. A trustworthy person demonstrates these qualities over time and under all circumstances. A trustworthy repository demonstrates these qualities through the team that manages the repository and its responsible organization. The requirements of a Trusted Digital Repository (TDR) in ISO 16363 can be tough to reach and tough to maintain. Challenges include: limited funds, limited resources and/or skills, and an unclear path to successfully achieve the requirements. The ISO standard defines each requirement separately, but a successful certification recognizes that there are many cross-dependencies among the requirements. Understanding these dependencies leads to a more efficient path towards success. At AGU we recognize that reaching the goal of the TDR ISO standard, or any set of data management objectives defined by an organization, has a better chance at success if the organization clearly knows their current capability, the improvements that are needed, and the best way to make (and maintain) those changes. AGU has partnered with the CMMI® Institute to adapt their Data Management Maturity (DMM)SM model within the Earth and space sciences. Using the DMM, AGU developed a new Data Management Assessment Program aimed at helping data repositories, large and small, domain-specific to general, assess and improve data management practices to meet their goals - including becoming a Trustworthy Digital Repository. The requirements to achieve the TDR ISO standard are aligned to the data management best practices defined in the Data Management Maturity (DMM)SM model. Using the DMM as a process improvement tool in conjunction with the Data Management Assessment method, a team seeking the objective of the TDR ISO standard receives a clear road map to achieving their goal as an outcome of the assessment. Publishers and agencies are beginning to recommend or even require that repositories demonstrate that they are practicing best practices or meeting certain standards. Data preserved in a data facility that is working on achieving a TDR standard will have the level of care desired by the publishing community as well as the science community. Better Data Management results in Better Science.

15 CFR 287.2 - Definitions. 1

Code of Federal Regulations, 2011 CFR

2011-01-01

... International Organization for Standardization (ISO)/International Electrotechnical Commission (IEC), Guide 2 (1996). In certain industrial sectors, it is recognized that organizations other than ISO or IEC may...; supplier's declaration of conformity; certification; and quality and environmental management system...

Enhanced definition and required examples of common datum imposed by ISO standard

NASA Astrophysics Data System (ADS)

Yan, Yiqing; Bohn, Martin

2017-12-01

According to the ISO Geometrical Product Specifications (GPS), the establishment and definition of common datum for geometrical components are not fully defined. There are two main limitations of this standard. Firstly: the explications of ISO examples of common datums are not matched with their corresponding definitions, and secondly: a full definition of common datum is missing. This paper suggests a new approach for an enhanced definition and concrete examples of common datum and proposes a holistic methodology for establishment of common datum for each geometrical component. This research is based on the analysis of physical behaviour of geometrical components, orientation constraints and invariance classes of datums. This approach fills the definition gaps of common datum based on ISO GPS, thereby eliminating those deficits. As a result, an improved methodology for a fully functional defined definition of common datum was formulated.

High resolution global gridded data for use in population studies

NASA Astrophysics Data System (ADS)

Lloyd, Christopher T.; Sorichetta, Alessandro; Tatem, Andrew J.

2017-01-01

Recent years have seen substantial growth in openly available satellite and other geospatial data layers, which represent a range of metrics relevant to global human population mapping at fine spatial scales. The specifications of such data differ widely and therefore the harmonisation of data layers is a prerequisite to constructing detailed and contemporary spatial datasets which accurately describe population distributions. Such datasets are vital to measure impacts of population growth, monitor change, and plan interventions. To this end the WorldPop Project has produced an open access archive of 3 and 30 arc-second resolution gridded data. Four tiled raster datasets form the basis of the archive: (i) Viewfinder Panoramas topography clipped to Global ADMinistrative area (GADM) coastlines; (ii) a matching ISO 3166 country identification grid; (iii) country area; (iv) and slope layer. Further layers include transport networks, landcover, nightlights, precipitation, travel time to major cities, and waterways. Datasets and production methodology are here described. The archive can be downloaded both from the WorldPop Dataverse Repository and the WorldPop Project website.

High resolution global gridded data for use in population studies.

PubMed

Lloyd, Christopher T; Sorichetta, Alessandro; Tatem, Andrew J

2017-01-31

Recent years have seen substantial growth in openly available satellite and other geospatial data layers, which represent a range of metrics relevant to global human population mapping at fine spatial scales. The specifications of such data differ widely and therefore the harmonisation of data layers is a prerequisite to constructing detailed and contemporary spatial datasets which accurately describe population distributions. Such datasets are vital to measure impacts of population growth, monitor change, and plan interventions. To this end the WorldPop Project has produced an open access archive of 3 and 30 arc-second resolution gridded data. Four tiled raster datasets form the basis of the archive: (i) Viewfinder Panoramas topography clipped to Global ADMinistrative area (GADM) coastlines; (ii) a matching ISO 3166 country identification grid; (iii) country area; (iv) and slope layer. Further layers include transport networks, landcover, nightlights, precipitation, travel time to major cities, and waterways. Datasets and production methodology are here described. The archive can be downloaded both from the WorldPop Dataverse Repository and the WorldPop Project website.

MUSQA: a CS method to build a multi-standard quality management system

NASA Astrophysics Data System (ADS)

Cros, Elizabeth; Sneed, Isabelle

2002-07-01

CS Communication & Systèmes, through its long quality management experience, has been able to build and evolve its Quality Management System according to clients requirements, norms, standards and models (ISO, DO178, ECSS, CMM, ...), evolving norms (transition from ISO 9001:1994 to ISO 9001:2000) and the TQM approach, being currently deployed. The aim of this paper is to show how, from this enriching and instructive experience, CS has defined and formalised its method: MuSQA (Multi-Standard Quality Approach). This method allows to built a new Quality Management System or simplify and unify an existing one. MuSQA objective is to provide any organisation with an open Quality Management System, which is able to evolve easily and turns to be a useful instrument for everyone, operational as well as non-operational staff.

The most common nonconformities encountered during the assessments of medical laboratories in Hong Kong using ISO 15189 as accreditation criteria.

PubMed

Ho, Bella; Ho, Eric

2012-01-01

ISO 15189 was a new standard published in 2003 for accrediting medical laboratories. We believe that some requirements of the ISO 15189 standard are especially difficult to meet for majority of laboratories. The aim of this article was to present the frequency of nonconformities to requirements of the ISO 15189 accreditation standard, encountered during the assessments of medical laboratories in Hong Kong, during 2004 to 2009. Nonconformities reported in assessments based on ISO 15189 were analyzed in two periods - from 2004 to 2006 and in 2009. They are categorized according to the ISO 15189 clause numbers. The performance of 27 laboratories initially assessed between 2004 and 2006 was compared to their performance in the second reassessment in 2009. For management requirements, nonconformities were most frequently reported against quality management system, quality and technical records and document control; whereas for technical requirements, they were reported against examination procedures, equipment, and assuring quality of examination procedures. There was no major difference in types of common nonconformities reported in the two study periods. The total number of nonconformities reported in the second reassessment of 27 laboratories in 2009 was almost halved compared to their initial assessments. The number of significant nonconformities per laboratory significantly decreased (P = 0.023). Similar nonconformities were reported in the two study periods though the frequency encountered decreased. The significant decrease in number of significant nonconformities encountered in the same group of laboratories in the two periods substantiated that 15015189 contributed to quality improvement of accredited laboratories.

Core Logistics Capability Policy Applied to USAF Combat Aircraft Avionics Software: A Systems Engineering Analysis

DTIC Science & Technology

2010-06-01

cannot make a distinction between software maintenance and development” (Sharma, 2004). ISO /IEC 12207 Software Lifecycle Processes offers a guide to...synopsis of ISO /IEC 12207 , Raghu Singh of the Federal Aviation Administration states “Whenever a software product needs modifications, the development...Corporation. Singh, R. (1998). International Standard ISO /IEC 12207 Software Life Cycle Processes. Washington: Federal Aviation Administration. The Joint

Application of the user-centred design process according ISO 9241-210 in air traffic control.

PubMed

König, Christina; Hofmann, Thomas; Bruder, Ralph

2012-01-01

Designing a usable human machine interface for air traffic control is challenging and should follow approved methods. The ISO 9241-210 standard promises high usability of products by integrating future users and following an iterative process. This contribution describes the proceeding and first results of the analysis and application of ISO 9241-210 to develop a planning tool for air traffic controllers.

Polymerase recognition of 2-thio-iso-guanine·5-methyl-4-pyrimidinone (iGs·P)--A new DD/AA base pair.

PubMed

Lee, Dong-Kye; Switzer, Christopher

2016-02-15

Polymerase specificity is reported for a previously unknown base pair with a non-standard DD/AA hydrogen bonding pattern: 2-thio-iso-guanine·5-methyl-4-pyrimidinone. Our findings suggest that atomic substitution may provide a solution for low fidelity previously associated with enzymatic copying of iso-guanine. Copyright © 2016 Elsevier Ltd. All rights reserved.

International standards on working postures and movements ISO 11226 and EN 1005-4.

PubMed

Delleman, N J; Dul, J

2007-11-01

Standards organizations have given considerable attention to the problem of work-related musculoskeletal disorders. The publication of international standards for evaluating working postures and movements, ISO 11,226 in 2000 and EN 1,005-4 in 2005, may be considered as a support for those involved in preventing and controlling these disorders. The first one is a tool for evaluation of existing work situations, whereas the latter one is a tool for evaluation during a design/engineering process. Key publications and considerations that led to the content of the standards are presented, followed by examples of application.

Using the ACR/NEMA standard with TCP/IP and Ethernet

NASA Astrophysics Data System (ADS)

Chimiak, William J.; Williams, Rodney C.

1991-07-01

There is a need for a consolidated picture archival and communications system (PACS) in hospitals. At the Bowman Gray School of Medicine of Wake Forest University (BGSM), the authors are enhancing the ACR/NEMA Version 2 protocol using UNIX sockets and TCP/IP to greatly improve connectivity. Initially, nuclear medicine studies using gamma cameras are to be sent to PACS. The ACR/NEMA Version 2 protocol provides the functionality of the upper three layers of the open system interconnection (OSI) model in this implementation. The images, imaging equipment information, and patient information are then sent in ACR/NEMA format to a software socket. From there it is handed to the TCP/IP protocol, which provides the transport and network service. TCP/IP, in turn, uses the services of IEEE 802.3 (Ethernet) to complete the connectivity. The advantage of this implementation is threefold: (1) Only one I/O port is consumed by numerous nuclear medicine cameras, instead of a physical port for each camera. (2) Standard protocols are used which maximize interoperability with ACR/NEMA compliant PACSs. (3) The use of sockets allows a migration path to the transport and networking services of OSIs TP4 and connectionless network service as well as the high-performance protocol being considered by the American National Standards Institute (ANSI) and the International Standards Organization (ISO) -- the Xpress Transfer Protocol (XTP). The use of sockets also gives access to ANSI's Fiber Distributed Data Interface (FDDI) as well as other high-speed network standards.

Noise producing toys and the efficacy of product standard criteria to protect health and education outcomes.

PubMed

McLaren, Stuart J; Page, Wyatt H; Parker, Lou; Rushton, Martin

2013-12-19

An evaluation of 28 commercially available toys imported into New Zealand revealed that 21% of these toys do not meet the acoustic criteria in the ISO standard, ISO 8124-1:2009 Safety of Toys, adopted by Australia and New Zealand as AS/NZS ISO 8124.1:2010. While overall the 2010 standard provided a greater level of protection than the earlier 2002 standard, there was one high risk toy category where the 2002 standard provided greater protection. A secondary set of toys from the personal collections of children known to display atypical methods of play with toys, such as those with autism spectrum disorders (ASD), was part of the evaluation. Only one of these toys cleanly passed the 2010 standard, with the remainder failing or showing a marginal-pass. As there is no tolerance level stated in the standards to account for interpretation of data and experimental error, a value of +2 dB was used. The findings of the study indicate that the current standard is inadequate in providing protection against excessive noise exposure. Amendments to the criteria have been recommended that apply to the recently adopted 2013 standard. These include the integration of the new approaches published in the recently amended European standard (EN 71) on safety of toys.

Noise Producing Toys and the Efficacy of Product Standard Criteria to Protect Health and Education Outcomes

PubMed Central

McLaren, Stuart J.; Page, Wyatt H.; Parker, Lou; Rushton, Martin

2013-01-01

An evaluation of 28 commercially available toys imported into New Zealand revealed that 21% of these toys do not meet the acoustic criteria in the ISO standard, ISO 8124-1:2009 Safety of Toys, adopted by Australia and New Zealand as AS/NZS ISO 8124.1:2010. While overall the 2010 standard provided a greater level of protection than the earlier 2002 standard, there was one high risk toy category where the 2002 standard provided greater protection. A secondary set of toys from the personal collections of children known to display atypical methods of play with toys, such as those with autism spectrum disorders (ASD), was part of the evaluation. Only one of these toys cleanly passed the 2010 standard, with the remainder failing or showing a marginal-pass. As there is no tolerance level stated in the standards to account for interpretation of data and experimental error, a value of +2 dB was used. The findings of the study indicate that the current standard is inadequate in providing protection against excessive noise exposure. Amendments to the criteria have been recommended that apply to the recently adopted 2013 standard. These include the integration of the new approaches published in the recently amended European standard (EN 71) on safety of toys. PMID:24452254

CERT Resilience Management Model, Version 1.0

DTIC Science & Technology

2010-05-01

practice such as ISO 27000 , COBIT, or ITIL. If you are a member of an established process improvement community, particularly one centered on CMMI...Systems Audit and Control Association ISO International Organization for Standardization ISSA Information Systems Security Association IT

Comparison of direct and indirect methods of measuring airborne chrysotile fibre concentration.

PubMed

Eypert-Blaison, Celine; Veissiere, Sylvie; Rastoix, Olivier; Kauffer, Edmond

2010-01-01

Transmission electron microscopy observations most frequently form a basis for estimating asbestos fibre concentration in the environment and in buildings with asbestos-containing materials. Sampled fibres can be transferred to microscope grids by applying either a direct [ISO (1995) Draft International ISO/DIS 10312. Ambient air. Determination of asbestos fibres. Direct transfer transmission electron microscopy procedure. Geneva, Switzerland: International Standardization Organization] or an indirect [AFNOR (1996) Détermination de la concentration en fibres d'amiante par microscopie électronique à transmission-Méthode indirecte. Cedex, France: AFNOR, p. 42; ISO (1997) Draft International ISO/DIS 13794. Ambient air. Determination of asbestos fibres. Indirect-transfer transmission electron microscopy procedure. Geneva, Switzerland: International Standardization Organization] method. In the latter case, ISO Standard 13794 recommends filtering calcination residues either on a polycarbonate (PC) filter (PC indirect method) or on a cellulose ester (CE) membrane (CE indirect method). The PC indirect method requires that fibres deposited on a PC filter be covered by a carbon layer, whereas in the CE indirect method, the CE membrane has to be directly processed using a method described in ISO Standard 10312. The purpose of this study was to compare results obtained using, on the one hand, direct preparation methods and, on the other hand, PC indirect or CE indirect methods, for counting asbestos fibres deposited on filters as a result of liquid filtration or air sampling. In direct method-based preparation, we observed that an etching time of 6-14 min does not affect the measured densities, except for fibres <1 microm deposited by liquid filtration. Moreover, in all cases, the direct method gives higher densities than the PC indirect method because of possible fibre disappearance when using the carbon evaporator implemented in the PC indirect method. The CE membrane used for sample preparation in the CE indirect method is collapsed prior to passing it through the carbon evaporator, so the fibres are less likely to disappear at this stage. We then note that the resulting fibre densities for chrysotile-loaded filters prepared using the direct method are close to those obtained with filters prepared using the CE indirect method. Our study therefore shows that, under the implemented experimental conditions, the PC and CE indirect preparation methods described in ISO Standard 13794 are not equivalent.

International Metadata Standards and Enterprise Data Quality Metadata Systems

NASA Astrophysics Data System (ADS)

Habermann, T.

2016-12-01

Well-documented data quality is critical in situations where scientists and decision-makers need to combine multiple datasets from different disciplines and collection systems to address scientific questions or difficult decisions. Standardized data quality metadata could be very helpful in these situations. Many efforts at developing data quality standards falter because of the diversity of approaches to measuring and reporting data quality. The "one size fits all" paradigm does not generally work well in this situation. The ISO data quality standard (ISO 19157) takes a different approach with the goal of systematically describing how data quality is measured rather than how it should be measured. It introduces the idea of standard data quality measures that can be well documented in a measure repository and used for consistently describing how data quality is measured across an enterprise. The standard includes recommendations for properties of these measures that include unique identifiers, references, illustrations and examples. Metadata records can reference these measures using the unique identifier and reuse them along with details (and references) that describe how the measure was applied to a particular dataset. A second important feature of ISO 19157 is the inclusion of citations to existing papers or reports that describe quality of a dataset. This capability allows users to find this information in a single location, i.e. the dataset metadata, rather than searching the web or other catalogs. I will describe these and other capabilities of ISO 19157 with examples of how they are being used to describe data quality across the NASA EOS Enterprise and also compare these approaches with other standards.

Enabling conformity to international standards within SeaDataNet

NASA Astrophysics Data System (ADS)

Schaap, Dick M. A.; Boldrini, Enrico; de Korte, Arjen; Santoro, Mattia; Manzella, Giuseppe; Nativi, Stefano

2010-05-01

SeaDataNet objective is to construct a standardized system for managing the large and diverse data sets collected by the oceanographic fleets and the new automatic observation systems. The aim is to network and enhance the currently existing infrastructures, which are the national oceanographic data centres and satellite data centres of 36 countries, active in data collection. The networking of these professional data centres, in a unique virtual data management system will provide integrated data sets of standardized quality on-line. The Common Data Index (CDI) is the middleware service adopted by SeaDataNet for discovery and access of the available data. In order to develop an interoperable and effective system, the use of international de facto and de jure standards is required. In particular the new goal object of this presentation is to introduce and discuss the solutions for making SeaDataNet compliant with the European Union (EU) INSPIRE directive and in particular with its Implementing Rules (IR). The European INSPIRE directive aims to rule the creation of an European Spatial Data Infrastructure (ESDI). This will enable the sharing of environmental spatial information among public sector organisations and better facilitate public access to spatial information across Europe. To ensure that the spatial data infrastructures of the European Member States are compatible and usable in a community and transboundary context, the directive requires that common IRs are adopted in a number of specific areas (Metadata, Data Specifications, Network Services, Data and Service Sharing and Monitoring and Reporting). Often the use of already approved digital geographic information standards is mandated, drawing from international organizations like the Open Geospatial Consortium (OGC) and the International Organization for Standardization (ISO), the latter by means of its Technical Committee 211 (ISO/TC 211). In the context of geographic data discovery a set of mandatory metadata information is identified by INSPIRE metadata regulations and recommended implementations appear in IRs, in particular the use of ISO 19139 Application Profile (ISO AP) of OGC Catalogue Service for the Web 2.0.2 (CSW), as well as the use of ISO19139 XML schemas (along with additional constraints) to encode and distribute the required INSPIRE metadata. SeaDataNet started its work in 2006, basing its metadata schema upon the ISO 19115 DTD, the available schema at that time. Overtime this was replaced with the present CDI v.1 XML schema, based on ISO 19115 abstract model with community specific features and constraints. In order to assure the INSPIRE conformity a GI-cat based solution was developed. GI-cat is a broker service able to mediate from different metadata sources and publish them through a consistent and unified interface. In this case GI-cat is used as a front end to the SeaDataNet portal publishing the available data, based on CDI v.1, through a CSW AP ISO interface. The first step consisted in the precise definition of a community profile of ISO19115, containing both INSPIRE and CDI driven constraints and extensions. This abstract model is ready to be implemented both in CDI v.1 and in ISO 19139; to this aim, guidelines were drafted. Then a mapping from the CDI v.1 to the ISO 19139 implementation was ready to be produced. The work resulted in the creation of a new CDI accessor within GI-cat. These type of components play the role of data model mediators within the framework. While a replacement of the CDI v.1 format with the ISO 19139 solution is planned for SeaDataNet in the future, this front-end solution make data discovery readily effective by clients within the INSPIRE community.

Quality assurance in military medical research and medical radiation accident management.

PubMed

Hotz, Mark E; Meineke, Viktor

2012-08-01

The provision of quality radiation-related medical diagnostic and therapeutic treatments cannot occur without the presence of robust quality assurance and standardization programs. Medical laboratory services are essential in patient treatment and must be able to meet the needs of all patients and the clinical personnel responsible for the medical care of these patients. Clinical personnel involved in patient care must embody the quality assurance process in daily work to ensure program sustainability. In conformance with the German Federal Government's concept for modern departmental research, the international standard ISO 9001, one of the relevant standards of the International Organization for Standardization (ISO), is applied in quality assurance in military medical research. By its holistic approach, this internationally accepted standard provides an excellent basis for establishing a modern quality management system in line with international standards. Furthermore, this standard can serve as a sound basis for the further development of an already established quality management system when additional standards shall apply, as for instance in reference laboratories or medical laboratories. Besides quality assurance, a military medical facility must manage additional risk events in the context of early recognition/detection of health risks of military personnel on deployment in order to be able to take appropriate preventive and protective measures; for instance, with medical radiation accident management. The international standard ISO 31000:2009 can serve as a guideline for establishing risk management. Clear organizational structures and defined work processes are required when individual laboratory units seek accreditation according to specific laboratory standards. Furthermore, international efforts to develop health laboratory standards must be reinforced that support sustainable quality assurance, as in the exchange and comparison of test results within the scope of external quality assurance, but also in the exchange of special diagnosis data among international research networks. In summary, the acknowledged standard for a quality management system to ensure quality assurance is the very generic standard ISO 9001.Health Phys. 103(2):221-225; 2012.

Human-centered design of a personal health record system for metabolic syndrome management based on the ISO 9241-210:2010 standard.

PubMed

Farinango, Charic D; Benavides, Juan S; Cerón, Jesús D; López, Diego M; Álvarez, Rosa E

2018-01-01

Previous studies have demonstrated the effectiveness of information and communication technologies to support healthy lifestyle interventions. In particular, personal health record systems (PHR-Ss) empower self-care, essential to support lifestyle changes. Approaches such as the user-centered design (UCD), which is already a standard within the software industry (ISO 9241-210:2010), provide specifications and guidelines to guarantee user acceptance and quality of eHealth systems. However, no single PHR-S for metabolic syndrome (MS) developed following the recommendations of the ISO 9241-210:2010 specification has been found in the literature. The aim of this study was to describe the development of a PHR-S for the management of MS according to the principles and recommendations of the ISO 9241-210 standard. The proposed PHR-S was developed using a formal software development process which, in addition to the traditional activities of any software process, included the principles and recommendations of the ISO 9241-210 standard. To gather user information, a survey sample of 1,187 individuals, eight interviews, and a focus group with seven people were performed. Throughout five iterations, three prototypes were built. Potential users of each system evaluated each prototype. The quality attributes of efficiency, effectiveness, and user satisfaction were assessed using metrics defined in the ISO/IEC 25022 standard. The following results were obtained: 1) a technology profile from 1,187 individuals at risk for MS from the city of Popayan, Colombia, identifying that 75.2% of the people use the Internet and 51% had a smartphone; 2) a PHR-S to manage MS developed (the PHR-S has the following five main functionalities: record the five MS risk factors, share these measures with health care professionals, and three educational modules on nutrition, stress management, and a physical activity); and 3) usability tests on each prototype obtaining the following results: 100% effectiveness, 100% efficiency, and 84.2 points in the system usability scale. The software development methodology used was based on the ISO 9241-210 standard, which allowed the development team to maintain a focus on user's needs and requirements throughout the project, which resulted in an increased satisfaction and acceptance of the system. Additionally, the establishment of a multidisciplinary team allowed the application of considerations not only from the disciplines of software engineering and health sciences but also from other disciplines such as graphical design and media communication. Finally, usability testing allowed the observation of flaws in the designs, which helped to improve the solution.

2011 ESTCP Live Site Demonstrations, Vallejo CA, ESTCP MR-1165, Demonstration Data Report, Former Mare Island Naval Shipyard, MTADS Discrimination Array, (TEMTADS) Survey

DTIC Science & Technology

2012-04-05

small Industry Standard Object ( ISO ) is a 1-in nominal, 4-in long pipe nipple1 that has been described previously [15]. The SuperISO is similar to...the small ISO , but 8” long2. Table 5-2 – Details of Former Mare Island Naval Shipyard IVS Target Description Easting (m) Northing (m) Depth to...13 Horizontal Along ~320 3 Small ISO 565,255.82 4,215,461.00 10 Horizontal Along ~320 All data sets for each of the emplaced IVS items were

Security Certification Challenges in a Cloud Computing Delivery Model

DTIC Science & Technology

2010-04-27

Relevant Security Standards, Certifications, and Guidance  NIST SP 800 series  ISO /IEC 27001 framework  Cloud Security Alliance  Statement of...CSA Domains / Cloud Features ISO 27001 Cloud Service Provider Responsibility Government Agency Responsibility Analyze Security gaps Compensating

36 CFR 1237.3 - What standards are incorporated by reference in this part?

Code of Federal Regulations, 2010 CFR

2010-07-01

... at http://webstore.ansi.org. (1) ISO 18906: 2000 (“ISO 18906”), Imaging Materials—Photographic Films.... Box 9109, Quincy, MA 02269-9101, phone number (617) 770-3000 or online at http://catalog.nfpa.org. (1...

The Energy Industry Profile of ISO/DIS 19115-1: Facilitating Discovery and Evaluation of, and Access to Distributed Information Resources

NASA Astrophysics Data System (ADS)

Hills, S. J.; Richard, S. M.; Doniger, A.; Danko, D. M.; Derenthal, L.; Energistics Metadata Work Group

2011-12-01

A diverse group of organizations representative of the international community involved in disciplines relevant to the upstream petroleum industry, - energy companies, - suppliers and publishers of information to the energy industry, - vendors of software applications used by the industry, - partner government and academic organizations, has engaged in the Energy Industry Metadata Standards Initiative. This Initiative envisions the use of standard metadata within the community to enable significant improvements in the efficiency with which users discover, evaluate, and access distributed information resources. The metadata standard needed to realize this vision is the initiative's primary deliverable. In addition to developing the metadata standard, the initiative is promoting its adoption to accelerate realization of the vision, and publishing metadata exemplars conformant with the standard. Implementation of the standard by community members, in the form of published metadata which document the information resources each organization manages, will allow use of tools requiring consistent metadata for efficient discovery and evaluation of, and access to, information resources. While metadata are expected to be widely accessible, access to associated information resources may be more constrained. The initiative is being conducting by Energistics' Metadata Work Group, in collaboration with the USGIN Project. Energistics is a global standards group in the oil and natural gas industry. The Work Group determined early in the initiative, based on input solicited from 40+ organizations and on an assessment of existing metadata standards, to develop the target metadata standard as a profile of a revised version of ISO 19115, formally the "Energy Industry Profile of ISO/DIS 19115-1 v1.0" (EIP). The Work Group is participating on the ISO/TC 211 project team responsible for the revision of ISO 19115, now ready for "Draft International Standard" (DIS) status. With ISO 19115 an established, capability-rich, open standard for geographic metadata, EIP v1 is expected to be widely acceptable within the community and readily sustainable over the long-term. The EIP design, also per community requirements, will enable discovery, evaluation, and access to types of information resources considered important to the community, including structured and unstructured digital resources, and physical assets such as hardcopy documents and material samples. This presentation will briefly review the development of this initiative as well as the current and planned Work Group activities. More time will be spent providing an overview of the EIP v1, including the requirements it prescribes, design efforts made to enable automated metadata capture and processing, and the structure and content of its documentation, which was written to minimize ambiguity and facilitate implementation. The Work Group considers EIP v1 a solid initial design for interoperable metadata, and first step toward the vision of the Initiative.

Panel C report: Standards needed for the use of ISO Open Systems Interconnection - basic reference model

NASA Technical Reports Server (NTRS)

1981-01-01

The use of an International Standards Organization (ISO) Open Systems Interconnection (OSI) Reference Model and its relevance to interconnecting an Applications Data Service (ADS) pilot program for data sharing is discussed. A top level mapping between the conjectured ADS requirements and identified layers within the OSI Reference Model was performed. It was concluded that the OSI model represents an orderly architecture for the ADS networking planning and that the protocols being developed by the National Bureau of Standards offer the best available implementation approach.

ISO WD 1856. Guideline for radiation exposure of nonmetallic materials. Present status

NASA Astrophysics Data System (ADS)

Briskman, B. A.

In the framework of the International Organization for Standardization (ISO) activity we started development of international standard series for space environment simulation at on-ground tests of materials. The proposal was submitted to ISO Technical Committee 20 (Aircraft and Space Vehicles), Subcommittee 14 (Space Systems and Operations) and was approved as Working Draft 15856 at the Los-Angeles meeting (1997). A draft of the first international standard "Space Environment Simulation for Radiation Tests of Materials" (1st version) was presented at the 7th International Symposium on Materials in Space Environment (Briskman et al, 1997). The 2nd version of the standard was limited to nonmetallic materials and presented at the 20th Space Simulation Conference (Briskman and Borson, 1998). It covers the testing of nonmetallic materials embracing also polymer composite materials including metal components (metal matrix composites) to simulated space radiation. The standard does not cover semiconductor materials. The types of simulated radiation include charged particles (electrons and protons), solar ultraviolet radiation, and soft X-radiation of solar flares. Synergistic interactions of the radiation environment are covered only for these natural and some induced environmental effects. This standard outlines the recommended methodology and practices for the simulation of space radiation on materials. Simulation methods are used to reproduce the effects of the space radiation environment on materials that are located on surfaces of space vehicles and behind shielding. It was discovered that the problem of radiation environment simulation is very complex and the approaches of different specialists and countries to the problem are sometimes quite opposite. To the present moment we developed seven versions of the standard. The last version is a compromise between these approaches. It was approved at the last ISO TC20/SC14/WG4 meeting in Houston, October 2002. At a splinter meeting of Int. Conference on Materials in a Space Environment, Noordwijk, Netherlands, ESA, June 2003, the experts from ESA, USA, France, Russia and Japan discussed the last version of the draft and approved it with a number of notes. A revised version of the standard will be presented this May at ISO TC20/SC14 meeting in Russia.

Military Petroleum Pipeline Systems

DTIC Science & Technology

1978-06-01

miodes of trunsportu-"tion conforming to tile cross-section for International Orounizations for Standardizu-tion ( ISO ) und American National Standards...along the I 00-ni lie length of’ thle pipleline., Facli pumlp stat ion wouli operate at a inuxu~inai discharge pressuro of’ ISO lb/in2 delivering...difficult, it would be possible to install 4-Inch, ISO - and 300-pound-class valves and 6-Inch, 150-pound-class valves without tile aid of materials handling

Laboratory Evaluation of Light Obscuration Particle Counter Contamination Limits for Aviation Fuel

DTIC Science & Technology

2015-11-01

diesel product for ground use (1). At a minimum free water and particulate by color (as specified in the appendix of ASTM D2276) are checked daily...used in the hydraulics/hydraulic fluid industry. In 1999 ISO adopted ISO 11171 Hydraulic fluid power — Calibration of automatic particle counters...for liquids, replacing ISO 4402, as an international standard for the calibration of liquid particle counters giving NIST traceability to particle

Light Obscuration Particle Counter Fuel Contamination Limits

DTIC Science & Technology

2015-10-08

or up to 10 mg/L for product used as a diesel product for ground use (1). At a minimum free water and particulate by color (as specified in the...contamination is frequently used in the hydraulics/hydraulic fluid industry. In 1999 ISO adopted ISO 11171 Hydraulic fluid power — Calibration of automatic...particle counters for liquids, replacing ISO 4402, as an international standard for the calibration of liquid particle counters giving NIST

Crosstalk: The Journal of Defense Software Engineering. Volume 22, Number 3

DTIC Science & Technology

2009-04-01

international standard for information security management systems like ISO /IEC 27001 :2005 [1] existed. Since that time, the organization has developed control...of ISO /IEC 27001 and the desire to make decisions based on business value and risk has prompted Ford’s IT Security and Controls organi- zation to begin...their conventional application security operation.u References 1. ISO /IEC 27001 :2005. “Information Technology – Security Techniques – Information

Report from the First CERT-RMM Users Group Workshop Series

DTIC Science & Technology

2012-04-01

deploy processes to support our programs – Benchmark our programs to determine current gaps – Complements current work in CMMI® and ISO 27001 19...benchmarking program performance through process analytics and Lean/Six Sigma activities to ensure Performance Excellence. • Provides ISO Standards...Office www.cmu.edu/ iso 29 Carnegie Mellon University • Est 1967 in Pittsburgh, PA • Global, private research university • Ranked 22nd • 15,000

Using a logical information model-driven design process in healthcare.

PubMed

Cheong, Yu Chye; Bird, Linda; Tun, Nwe Ni; Brooks, Colleen

2011-01-01

A hybrid standards-based approach has been adopted in Singapore to develop a Logical Information Model (LIM) for healthcare information exchange. The Singapore LIM uses a combination of international standards, including ISO13606-1 (a reference model for electronic health record communication), ISO21090 (healthcare datatypes), SNOMED CT (healthcare terminology) and HL7 v2 (healthcare messaging). This logic-based design approach also incorporates mechanisms for achieving bi-directional semantic interoperability.

An approach for the semantic interoperability of ISO EN 13606 and OpenEHR archetypes.

PubMed

Martínez-Costa, Catalina; Menárguez-Tortosa, Marcos; Fernández-Breis, Jesualdo Tomás

2010-10-01

The communication between health information systems of hospitals and primary care organizations is currently an important challenge to improve the quality of clinical practice and patient safety. However, clinical information is usually distributed among several independent systems that may be syntactically or semantically incompatible. This fact prevents healthcare professionals from accessing clinical information of patients in an understandable and normalized way. In this work, we address the semantic interoperability of two EHR standards: OpenEHR and ISO EN 13606. Both standards follow the dual model approach which distinguishes information and knowledge, this being represented through archetypes. The solution presented here is capable of transforming OpenEHR archetypes into ISO EN 13606 and vice versa by combining Semantic Web and Model-driven Engineering technologies. The resulting software implementation has been tested using publicly available collections of archetypes for both standards.

Accuracy in planar cutting of bones: an ISO-based evaluation.

PubMed

Cartiaux, Olivier; Paul, Laurent; Docquier, Pierre-Louis; Francq, Bernard G; Raucent, Benoît; Dombre, Etienne; Banse, Xavier

2009-03-01

Computer- and robot-assisted technologies are capable of improving the accuracy of planar cutting in orthopaedic surgery. This study is a first step toward formulating and validating a new evaluation methodology for planar bone cutting, based on the standards from the International Organization for Standardization. Our experimental test bed consisted of a purely geometrical model of the cutting process around a simulated bone. Cuts were performed at three levels of surgical assistance: unassisted, computer-assisted and robot-assisted. We measured three parameters of the standard ISO1101:2004: flatness, parallelism and location of the cut plane. The location was the most relevant parameter for assessing cutting errors. The three levels of assistance were easily distinguished using the location parameter. Our ISO methodology employs the location to obtain all information about translational and rotational cutting errors. Location may be used on any osseous structure to compare the performance of existing assistance technologies.

Comparison of Chromogenic Selective Media for the Detection of Cronobacter spp. (Enterobacter sakazakii).

PubMed

Teramura, Hajime; Fukuda, Noriko; Okada, Yumiko; Ogihara, Hirokazu

2018-01-01

　The four types of chromogenic selective media that are commercially available in Japan were compared for establishing a Japanese standard method for detecting Cronobacter spp. based on ISO/TS 22964:2006. When assessed using 9 standard Cronobacter spp. strains and 29 non-Cronobacter strains, Enterobacter sakazakii isolation agar, Chromocult TM Enterobacter sakazakii agar, CHROMagar TM E. sakazakii, and XM-sakazakii agar demonstrated excellent inclusivity and exclusivity. Using the ISO/TS 22964:2006 method, the recovered numbers of 38 Cronobacter spp. strains, including 29 C. sakazakii isolates obtained from each medium, were equivalent, indicating that there was no significant difference (p > 0.05) among the four types of chromogenic selective media. Thus, we demonstrated that these four chromogenic selective media are suitable alternatives when using the standard method for detecting Cronobacter spp. in Japan, based on the ISO/TS 22964:2006.

Computational Fluid Dynamics Assessment Associated with Transcatheter Heart Valve Prostheses: A Position Paper of the ISO Working Group.

PubMed

Wei, Zhenglun Alan; Sonntag, Simon Johannes; Toma, Milan; Singh-Gryzbon, Shelly; Sun, Wei

2018-04-19

The governing international standard for the development of prosthetic heart valves is International Organization for Standardization (ISO) 5840. This standard requires the assessment of the thrombus potential of transcatheter heart valve substitutes using an integrated thrombus evaluation. Besides experimental flow field assessment and ex vivo flow testing, computational fluid dynamics is a critical component of this integrated approach. This position paper is intended to provide and discuss best practices for the setup of a computational model, numerical solving, post-processing, data evaluation and reporting, as it relates to transcatheter heart valve substitutes. This paper is not intended to be a review of current computational technology; instead, it represents the position of the ISO working group consisting of experts from academia and industry with regards to considerations for computational fluid dynamic assessment of transcatheter heart valve substitutes.

ANAB, Certification and Scope of Accreditation (ISO/IEC 17025:2005) for the National Vehicle and Fuel Emissions Laboratory

EPA Pesticide Factsheets

This document certifies that the EPA National Vehicle and Fuel Emissions Laboratory has been assessed by the ANSI-ASQ National Accredation Board and accredited in meeting ISO-IEC 17025:2005 quality standards.

Performance of two updated blood glucose monitoring systems: an evaluation following ISO 15197:2013.

PubMed

Pleus, Stefan; Baumstark, Annette; Rittmeyer, Delia; Jendrike, Nina; Haug, Cornelia; Freckmann, Guido

2016-05-01

Objective For patients with diabetes, regular self-monitoring of blood glucose (SMBG) is essential to ensure adequate glycemic control. Therefore, accurate and reliable blood glucose measurements with SMBG systems are necessary. The international standard ISO 15197 describes requirements for SMBG systems, such as limits within which 95% of glucose results have to fall to reach acceptable system accuracy. The 2013 version of this standard sets higher demands, especially regarding system accuracy, than the currently still valid edition. ISO 15197 can be applied by manufacturers to receive a CE mark for their system. Research design and methods This study was an accuracy evaluation following ISO 15197:2013 section 6.3 of two recently updated SMBG systems (Contour * and Contour TS; Bayer Consumer Care AG, Basel, Switzerland) with an improved algorithm to investigate whether the systems fulfill the requirements of the new standard. For this purpose, capillary blood samples of approximately 100 participants were measured with three test strip lots of both systems and deviations from glucose values obtained with a hexokinase-based comparison method (Cobas Integra † 400 plus; Roche Instrument Center, Rotkreuz, Switzerland) were determined. Percentages of values within the acceptance criteria of ISO 15197:2013 were calculated. This study was registered at clinicaltrials.gov (NCT02358408). Main outcome Both updated systems fulfilled the system accuracy requirements of ISO 15197:2013 as 98.5% to 100% of the results were within the stipulated limits. Furthermore, all results were within the clinically non-critical zones A and B of the consensus error grid for type 1 diabetes. Conclusions The technical improvement of the systems ensured compliance with ISO 15197 in the hands of healthcare professionals even in its more stringent 2013 version. Alternative presentation of system accuracy results in radar plots provides additional information with certain advantages. In addition, the surveillance error grid offers a modern tool to assess a system's clinical performance.

Multivariate Statistical Analysis of Cigarette Design Feature Influence on ISO TNCO Yields.

PubMed

Agnew-Heard, Kimberly A; Lancaster, Vicki A; Bravo, Roberto; Watson, Clifford; Walters, Matthew J; Holman, Matthew R

2016-06-20

The aim of this study is to explore how differences in cigarette physical design parameters influence tar, nicotine, and carbon monoxide (TNCO) yields in mainstream smoke (MSS) using the International Organization of Standardization (ISO) smoking regimen. Standardized smoking methods were used to evaluate 50 U.S. domestic brand cigarettes and a reference cigarette representing a range of TNCO yields in MSS collected from linear smoking machines using a nonintense smoking regimen. Multivariate statistical methods were used to form clusters of cigarettes based on their ISO TNCO yields and then to explore the relationship between the ISO generated TNCO yields and the nine cigarette physical design parameters between and within each cluster simultaneously. The ISO generated TNCO yields in MSS are 1.1-17.0 mg tar/cigarette, 0.1-2.2 mg nicotine/cigarette, and 1.6-17.3 mg CO/cigarette. Cluster analysis divided the 51 cigarettes into five discrete clusters based on their ISO TNCO yields. No one physical parameter dominated across all clusters. Predicting ISO machine generated TNCO yields based on these nine physical design parameters is complex due to the correlation among and between the nine physical design parameters and TNCO yields. From these analyses, it is estimated that approximately 20% of the variability in the ISO generated TNCO yields comes from other parameters (e.g., filter material, filter type, inclusion of expanded or reconstituted tobacco, and tobacco blend composition, along with differences in tobacco leaf origin and stalk positions and added ingredients). A future article will examine the influence of these physical design parameters on TNCO yields under a Canadian Intense (CI) smoking regimen. Together, these papers will provide a more robust picture of the design features that contribute to TNCO exposure across the range of real world smoking patterns.

The American Archival Profession and Information Technology Standards.

ERIC Educational Resources Information Center

Cox, Richard J.

1992-01-01

Discussion of the use of standards by archivists highlights the U.S. MARC AMC (Archives-Manuscript Control) format for reporting archival records and manuscripts; their interest in specific standards being developed for the OSI (Open Systems Interconnection) reference model; and the management of records in electronic formats. (16 references) (LAE)

The Quantitative Relationship Between ISO 15197 Accuracy Criteria and Mean Absolute Relative Difference (MARD) in the Evaluation of Analytical Performance of Self-Monitoring of Blood Glucose (SMBG) Systems.

PubMed

Pardo, Scott; Simmons, David A

2016-09-01

The relationship between International Organization for Standardization (ISO) accuracy criteria and mean absolute relative difference (MARD), 2 methods for assessing the accuracy of blood glucose meters, is complex. While lower MARD values are generally better than higher MARD values, it is not possible to define a particular MARD value that ensures a blood glucose meter will satisfy the ISO accuracy criteria. The MARD value that ensures passing the ISO accuracy test can be described only as a probabilistic range. In this work, a Bayesian model is presented to represent the relationship between ISO accuracy criteria and MARD. Under the assumptions made in this work, there is nearly a 100% chance of satisfying ISO 15197:2013 accuracy requirements if the MARD value is between 3.25% and 5.25%. © 2016 Diabetes Technology Society.

Peccei-Quinn symmetry for Dirac seesaw and leptogenesis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gu, Pei-Hong

We extend the DFSZ invisible axion model to simultaneously explain small Dirac neutrino masses and cosmic matter-antimatter asymmetry. After the Peccei-Quinn and electroweak symmetry breaking, the effective Yukawa couplings of the Dirac neutrinos to the standard model Higgs scalar can be highly suppressed by the ratio of the vacuum expectation value of an iso-triplet Higgs scalar over the masses of some heavy gauge-singlet fermions, iso-doublet Higgs scalars or iso-triplet fermions. The iso-triplet fields can carry a zero or nonzero hypercharge. Through the decays of the heavy gauge-singlet fermions, iso-doublet scalars or iso-triplet fermions, we can obtain a lepton asymmetry inmore » the left-handed leptons and an opposite lepton asymmetry in the right-handed neutrinos. Since the right-handed neutrinos do not participate in the sphaleron processes, the left-handed lepton asymmetry can be partially converted to a baryon asymmetry.« less

Prediction of Regulation Reserve Requirements in California ISO Control Area based on BAAL Standard

DOE Office of Scientific and Technical Information (OSTI.GOV)

Etingov, Pavel V.; Makarov, Yuri V.; Samaan, Nader A.

This paper presents new methodologies developed at Pacific Northwest National Laboratory (PNNL) to estimate regulation capacity requirements in the California ISO control area. Two approaches have been developed: (1) an approach based on statistical analysis of actual historical area control error (ACE) and regulation data, and (2) an approach based on balancing authority ACE limit control performance standard. The approaches predict regulation reserve requirements on a day-ahead basis including upward and downward requirements, for each operating hour of a day. California ISO data has been used to test the performance of the proposed algorithms. Results show that software tool allowsmore » saving up to 30% on the regulation procurements cost .« less

ISO Key Project: Exploring The Full Range of Quasar/AGN Properties

NASA Technical Reports Server (NTRS)

Wilkes, Belinda; West, Donald K. (Technical Monitor)

2002-01-01

While most of the work on this program has been completed, as previously reported, the portion of the program dealing with the sub topic of ISO LWS data analysis and reduction for the LWS Extragalactic Science Team and its leader, Dr. Howard Smith, is still active. This program in fact continues to generate results, and newly available computer modeling has extended the value of the datasets, As a result the team has requested and been granted an obtained a no-cost extension to this program, through December 31, 2003. The essence of the proposal is to perform ISO spectroscopic studies, including data analysis and modeling, of star formation regions using an ensemble of archival space-based data from the Infrared Space Observatory's Long Wavelength Spectrometer and Short Wavelength Spectrometer, but including as well some other spectroscopic data bases. Four kinds of regions are considered in the studies: (1) disks around more evolved objects; (2) young, low or high mass pre-main sequence stars in star formation regions; (3) star formation in external, bright IR galaxies; and (4) the galactic center. One prime focus of the program is the OH lines in the far infrared. The program has the following goals: (1) refine the data analysis of ISO observations, to obtain deeper and better SNR results on selected sources. The ISO data itself underwent "pipeline 10" reductions in early 2001, and additional "hands-on data reduction packages" were supplied by the ISO teams in 2001. The Fabry-Perot database in particularly sensitive to noise can slight calibration errors. (2) model the atomic and molecular line shapes, in particular the OH lines, using revised Monte-Carlo techniques developed by the SWAS team at the Center for Astrophysics; (3) attend scientific meetings and workshops; (4) do E&PO activities related to infrared astrophysics and/or spectroscopy.

A comparative presentation of implementation of ISO 22000 versus HACCP and FMEA in a small size Greek factory producing smoked trout: a case study.

PubMed

Arvanitoyannis, Ioannis S; Palaiokostas, Christos; Panagiotaki, Panagiota

2009-02-01

ISO 22000 is the new standard bound to replace HACCP on issues related to food safety. Although several companies, especially the big ones, have either implemented or are on the point of implementing ISO 22000, there are many others which are rather timid and/or reluctant to implement it. The main reason behind that is the lack of information and the fear that the new standard is too demanding in terms of bureaucratic work. This paper aims at making a comparative presentation of how the two systems can be applied to a small smoked salmon producing company thereby facilitating the emergence of the differences. The main difference is that in ISO 22000 systems like Good Manufacturing Practice and Good Hygiene Practice are prerequisites thus leading to lower number of CCPs. In this case study for example, the number of CCPs dropped from eight (8) in HACCP to four (4) in ISO 22000. Furthermore, the Failure Mode and Effect Analysis was applied to the smoked trout manufacturing process in an attempt to calculate quantitatively the Risk Priority Number (RPN) and to find out whether it can be effectively correlated to ISO 22000 and/or HACCP. RPN was found to be higher than 130 for eight steps, in close agreement with HACCP, thereby indicating that corrective actions will have to be undertaken.

Information model for digital exchange of soil-related data - potential modifications on ISO 28258

NASA Astrophysics Data System (ADS)

Schulz, Sina; Eberhardt, Einar; Reznik, Tomas

2017-04-01

ABSTRACT The International Standard ISO 28258 "Digital exchange of soil-related data" provides an information model that describes the organization of soil data to facilitate data transfer between data producers, holders and users. The data model contains a fixed set of "core" soil feature types, data types and properties, whereas its customization is on the data provider level, e.g. by adding user-specific properties. Rules for encoding these information are given by a customized XML-based format (called "SoilML"). Some technical shortcomings are currently under consideration in the ISO working group. Directly after publication of ISO 28258 in 2013, also several conceptual and implementation issues concerning the information model had been identified, such as renaming of feature types, modification of data types, and enhancement of definitions or addition of super-classes are part of the current revision process. Conceptual changes for the current ISO data model that are compatible with the Australian/New Zealand soil data model ANZSoilML and the EU INSPIRE Data Specifications Soil are also discussed. The concept of a model with a limited set of properties that can be extended by the data provider should remain unaffected. This presentation aims to introduce and comment on the current ISO soil information model and the proposed modifications. Moreover, we want to discuss these adjustments with respect to enhanced applicability of this International Standard.

49 CFR 178.71 - Specifications for UN pressure receptacles.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) [Reserved] (g) Design and construction requirements for UN refillable seamless steel cylinders. In addition to the general requirements of this section, UN refillable seamless steel cylinders must conform to the following ISO standards, as applicable: (1) ISO 9809-1: Gas cylinders—Refillable seamless steel...

75 FR 54804 - Safety and Health Management Programs for Mines

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-09

... regulations, and include participation of everyone from the Chief Executive Officer (CEO) to workers and... involvement of workers from the development of the program through implementation to evaluation. Requests to... Standards Organization's (ISO's) ISO 9001:2008 (E), Quality management systems--Requirements; and The...

The Technical Communicator and ISO 9000.

ERIC Educational Resources Information Center

Weiss, Edmond H.

1993-01-01

Describes the complexities of ISO 9000, a set of generic quality standards to which any commercial firm wishing to do business with a member firm of the European Economic Community will have to comply. Describes opportunities for professional technical communicators in providing the required product documentation. (SR)

Application of ISO 9000 Standards to Education and Training.

ERIC Educational Resources Information Center

Van den Berghe, Wouter

1998-01-01

ISO 9000 certification has the advantages of a measurable framework for quality efforts, continuous improvement, and better customer service. Drawbacks for education and training providers include volume of paperwork, ongoing cost, risk of a growing bureaucracy, and the difficulty of making changes quickly. (SK)

Prosody and Intonation of Western Cham

ERIC Educational Resources Information Center

Ueki, Kaori

2011-01-01

This dissertation investigates the prosodic and intonational characteristics of Western Cham (three letter code for International Organization for Standardization's ISO 639-3 code: [iso=cja]), an Austronesian language in the Chamic sub-group. I examine acoustic variables of prominence at word and postlexical levels: syllable duration, pitch…

Providing comprehensive and consistent access to astronomical observatory archive data: the NASA archive model

NASA Astrophysics Data System (ADS)

McGlynn, Thomas; Fabbiano, Giuseppina; Accomazzi, Alberto; Smale, Alan; White, Richard L.; Donaldson, Thomas; Aloisi, Alessandra; Dower, Theresa; Mazzerella, Joseph M.; Ebert, Rick; Pevunova, Olga; Imel, David; Berriman, Graham B.; Teplitz, Harry I.; Groom, Steve L.; Desai, Vandana R.; Landry, Walter

2016-07-01

Since the turn of the millennium a constant concern of astronomical archives have begun providing data to the public through standardized protocols unifying data from disparate physical sources and wavebands across the electromagnetic spectrum into an astronomical virtual observatory (VO). In October 2014, NASA began support for the NASA Astronomical Virtual Observatories (NAVO) program to coordinate the efforts of NASA astronomy archives in providing data to users through implementation of protocols agreed within the International Virtual Observatory Alliance (IVOA). A major goal of the NAVO collaboration has been to step back from a piecemeal implementation of IVOA standards and define what the appropriate presence for the US and NASA astronomy archives in the VO should be. This includes evaluating what optional capabilities in the standards need to be supported, the specific versions of standards that should be used, and returning feedback to the IVOA, to support modifications as needed. We discuss a standard archive model developed by the NAVO for data archive presence in the virtual observatory built upon a consistent framework of standards defined by the IVOA. Our standard model provides for discovery of resources through the VO registries, access to observation and object data, downloads of image and spectral data and general access to archival datasets. It defines specific protocol versions, minimum capabilities, and all dependencies. The model will evolve as the capabilities of the virtual observatory and needs of the community change.

Providing Comprehensive and Consistent Access to Astronomical Observatory Archive Data: The NASA Archive Model

NASA Technical Reports Server (NTRS)

McGlynn, Thomas; Guiseppina, Fabbiano A; Accomazzi, Alberto; Smale, Alan; White, Richard L.; Donaldson, Thomas; Aloisi, Alessandra; Dower, Theresa; Mazzerella, Joseph M.; Ebert, Rick;

Towards a World Catalogue of Standards

ERIC Educational Resources Information Center

Kuiper, Barteld E.

1973-01-01

The International Organization for Standardization (ISO) efforts to develop a uniform catalog of integrated standard indexes from around the world are described. The purpose is to facilitate the search for standards. (SM)

Interoperability at ESA Heliophysics Science Archives: IVOA, HAPI and other implementations

NASA Astrophysics Data System (ADS)

Martinez-Garcia, B.; Cook, J. P.; Perez, H.; Fernandez, M.; De Teodoro, P.; Osuna, P.; Arnaud, M.; Arviset, C.

2017-12-01

The data of ESA heliophysics science missions are preserved at the ESAC Science Data Centre (ESDC). The ESDC aims for the long term preservation of those data, which includes missions such as Ulysses, Soho, Proba-2, Cluster, Double Star, and in the future, Solar Orbiter. Scientists have access to these data through web services, command line and graphical user interfaces for each of the corresponding science mission archives. The International Virtual Observatory Alliance (IVOA) provides technical standards that allow interoperability among different systems that implement them. By adopting some IVOA standards, the ESA heliophysics archives are able to share their data with those tools and services that are VO-compatible. Implementation of those standards can be found in the existing archives: Ulysses Final Archive (UFA) and Soho Science Archive (SSA). They already make use of VOTable format definition and Simple Application Messaging Protocol (SAMP). For re-engineered or new archives, the implementation of services through Table Access Protocol (TAP) or Universal Worker Service (UWS) will leverage this interoperability. This will be the case for the Proba-2 Science Archive (P2SA) and the Solar Orbiter Archive (SOAR). We present here which IVOA standards were already used by the ESA Heliophysics archives in the past and the work on-going.

Ride quality criteria and the design process. [standards for ride comfort

NASA Technical Reports Server (NTRS)

Ravera, R. J.

1975-01-01

Conceptual designs for advanced ground transportation systems often hinge on obtaining acceptable vehicle ride quality while attempting to keep the total guideway cost (initial and subsequent maintenance) as low as possible. Two ride quality standards used extensively in work sponsored by the U.S. Department of Transportation (DOT) are the DOT-Urban Tracked Air Cushion Vehicle (UTACV) standard and the International Standards Organization (ISO) reduced ride comfort criteria. These standards are reviewed and some of the deficiencies, which become apparent when trying to apply them in practice, are noted. Through the use of a digital simulation, the impact of each of these standards on an example design process is examined. It is shown that meeting the ISO specification for the particular vehicle/guideway case investigated is easier than meeting the UTACV standard.

6-Iso-chlortetracycline or keto form of chlortetracycline? Need for clarification for relevant monitoring of chlortetracycline residues in food.

PubMed

Gaugain, Murielle; Gautier, Sophie; Bourcier, Sophie; Jacques, Anne-Marie; Laurentie, Michel; Abjean, Jean-Pierre; Hurtaud-Pessel, Dominique; Verdon, Eric

2015-01-01

Chlortetracycline (CTC) is a broad-spectrum antibiotic used in veterinary medicine for pulmonary or digestive infections and having a regulatory maximum residue limit (MRL) necessitating an official analytical control method. The purpose of this study was to clarify the identification of different forms of CTC observed in standard solution, in spiked muscle samples and in naturally incurred muscle samples of pigs analysed by LC-MS/MS and to demonstrate the in vivo formation of 6-iso-chlortetracycline and 4-epi-6-iso-CTC as a metabolite of CTC and 4-epi-CTC in muscle. The six following forms were identified, all being isobaric with a protonated molecule at m/z 479 (precursor ion): the keto-enol forms of CTC and the keto-enol forms of 4-epi-chlortetracycline (4-epi-CTC), 6-iso-chlortetracycline (6-iso-CTC) and 4-epi-6-iso-chlortetracycline (4-epi-6-iso-CTC). The 6-iso-CTC and 4-epi-6-iso-CTC were observed only in incurred pig samples so were identified for the first time as metabolites of CTC and 4-epi-CTC. Identification of the different forms was obtained by comparing incurred muscle samples with standard solutions and with spiked samples. Then the differences between the features of the chromatograms obtained by LC-TQ-MS and the fragmentation study of the different forms of CTC obtained by LC-Q-TOF-MS helped us to support this identification. The extraction steps and the LC-MS/MS conditions developed to analyse muscle tissue samples are described. This clarification concerning the rigorous identification of chromatographic peaks allowed us to evaluate the relevance of our monitoring method with regard to the regulations in place in the European Union and could be of help to laboratories involved in official control of antibiotic residues in food of animal origin. Additional results are also presented highlighting the transformation of the CTC when prepared in a mixture with other antibiotics.

[Migration of eight harmful elements from household products made with synthetic resin that infants may swallow by mistake].

PubMed

Isama, Kazuo; Kawakami, Tsuyoshi; Nishimura, Tetsuji

2011-01-01

Harmful elements are used as stabilizers and colorants in synthetic resin products. Accidental ingestion of harmful elements from such synthetic resins by infants is a dangerous health hazard. The Japanese Food Sanitation Law and the International Standard ISO 8124-3 "Safety of toys-Part 3: Migration of certain elements" control the levels of migrated harmful elements, such as lead or cadmium, from infants toys. However, the levels of migrated harmful elements from household products that are not infants toys are not controlled, since they are not covered by the law or standard. Therefore, we investigated the level of eight harmful elements (antimony, arsenic, barium, cadmium, chromium, lead, mercury and selenium) migrated from household products made of synthetic resin that infants may swallow by mistake. The extraction test of ISO 8124-3: 2010 was executed in 135 products (total 150 specimens), and the concentration of these elements was measured by inductively coupled plasma mass spectroscopy (ICP-MS). As a result, 1810 mg/kg and 1660 mg/kg of lead, exceeding the maximum acceptable level of the ISO standard, migrated from two products. In addition, lead and/or chromium at levels more than 1/10 of the maximum acceptable levels of the ISO standard migrated from four products. Household products that infants may swallow by mistake should ideally not release harmful elements such as lead and chromium.

INTERNATIONAL STANDARDS ON FOOD AND ENVIRONMENTAL RADIOACTIVITY MEASUREMENT FOR RADIOLOGICAL PROTECTION: STATUS AND PERSPECTIVES.

PubMed

Calmet, D; Ameon, R; Bombard, A; Brun, S; Byrde, F; Chen, J; Duda, J-M; Forte, M; Fournier, M; Fronka, A; Haug, T; Herranz, M; Husain, A; Jerome, S; Jiranek, M; Judge, S; Kim, S B; Kwakman, P; Loyen, J; LLaurado, M; Michel, R; Porterfield, D; Ratsirahonana, A; Richards, A; Rovenska, K; Sanada, T; Schuler, C; Thomas, L; Tokonami, S; Tsapalov, A; Yamada, T

2017-04-01

Radiological protection is a matter of concern for members of the public and thus national authorities are more likely to trust the quality of radioactivity data provided by accredited laboratories using common standards. Normative approach based on international standards aims to ensure the accuracy or validity of the test result through calibrations and measurements traceable to the International System of Units. This approach guarantees that radioactivity test results on the same types of samples are comparable over time and space as well as between different testing laboratories. Today, testing laboratories involved in radioactivity measurement have a set of more than 150 international standards to help them perform their work. Most of them are published by the International Standardization Organization (ISO) and the International Electrotechnical Commission (IEC). This paper reviews the most essential ISO standards that give guidance to testing laboratories at different stages from sampling planning to the transmission of the test report to their customers, summarizes recent activities and achievements and present the perspectives on new standards under development by the ISO Working Groups dealing with radioactivity measurement in connection with radiological protection. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Information Asymmetries as Trade Barriers: ISO 9000 Increases International Commerce

ERIC Educational Resources Information Center

Potoski, Matthew; Prakash, Aseem

2009-01-01

Spatial, cultural, and linguistic barriers create information asymmetries between buyers and sellers that impede international trade. The International Organization for Standardization's ISO 9000 program is designed to reduce these information asymmetries by providing assurance about the product quality of firms that receive its certification.…

78 FR 14654 - Standards for Business Practices and Communication Protocols for Public Utilities

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-07

... also require each regional transmission organization (RTO) and independent system operator (ISO) to... 20426, (202) 502-6404. Mindi Sauter (legal issues), Office of the General Counsel, Federal Energy... require each regional transmission organization (RTO) and independent system operator (ISO) to address in...

Quality Assurance in Engineering Education: Comparison of Accreditation Schemes and ISO 9001.

ERIC Educational Resources Information Center

Karapetrovic, Stanislav; Rajamani, Divakar; Willborn, Walter

1998-01-01

Outlines quality assurance schemes for distance-education technologies that are based on the ISO 9000 family of international quality-assurance standards. Argues that engineering faculties can establish such systems on the basis of and integrated with accreditation schemes. Contains 34 references. (DDR)

Test Report, BioLite HomeStove with Wood Fuel, Air Pollutant Emissions and Fuel Efficiency

EPA Science Inventory

Test results were obtained in accordance with ISO (International Organization for Standardization) IWA (International Workshop Agreement) 11:2012 that was unanimously affirmed by more than 90 stakeholders at the ISO International Workshop on Cookstoves on February 28-29, 2012 in ...

Test Report, BioLite Home Stove with Wood Fuel, Air Pollutant Emissions and Fuel Efficiency

EPA Science Inventory

Test results were obtained in accordance with ISO (International Organization for Standardization) IWA (International Workshop Agreement) 11:2012 that was unanimously affirmed by more than 90 stakeholders at the ISO International Workshop on Cookstoves on February 28-29, 2012 in ...

Analysis of the quality of hospital information systems Audit Trails.

PubMed

Cruz-Correia, Ricardo; Boldt, Isabel; Lapão, Luís; Santos-Pereira, Cátia; Rodrigues, Pedro Pereira; Ferreira, Ana Margarida; Freitas, Alberto

2013-08-06

Audit Trails (AT) are fundamental to information security in order to guarantee access traceability but can also be used to improve Health information System's (HIS) quality namely to assess how they are used or misused. This paper aims at analysing the existence and quality of AT, describing scenarios in hospitals and making some recommendations to improve the quality of information. The responsibles of HIS for eight Portuguese hospitals were contacted in order to arrange an interview about the importance of AT and to collect audit trail data from their HIS. Five institutions agreed to participate in this study; four of them accepted to be interviewed, and four sent AT data. The interviews were performed in 2011 and audit trail data sent in 2011 and 2012. Each AT was evaluated and compared in relation to data quality standards, namely for completeness, comprehensibility, traceability among others. Only one of the AT had enough information for us to apply a consistency evaluation by modelling user behaviour. The interviewees in these hospitals only knew a few AT (average of 1 AT per hospital in an estimate of 21 existing HIS), although they all recognize some advantages of analysing AT. Four hospitals sent a total of 7 AT - 2 from Radiology Information System (RIS), 2 from Picture Archiving and Communication System (PACS), 3 from Patient Records. Three of the AT were understandable and three of the AT were complete. The AT from the patient records are better structured and more complete than the RIS/PACS. Existing AT do not have enough quality to guarantee traceability or be used in HIS improvement. Its quality reflects the importance given to them by the CIO of healthcare institutions. Existing standards (e.g. ASTM:E2147, ISO/TS 18308:2004, ISO/IEC 27001:2006) are still not broadly used in Portugal.

Analysis of the quality of hospital information systems audit trails

PubMed Central

2013-01-01

Background Audit Trails (AT) are fundamental to information security in order to guarantee access traceability but can also be used to improve Health information System’s (HIS) quality namely to assess how they are used or misused. This paper aims at analysing the existence and quality of AT, describing scenarios in hospitals and making some recommendations to improve the quality of information. Methods The responsibles of HIS for eight Portuguese hospitals were contacted in order to arrange an interview about the importance of AT and to collect audit trail data from their HIS. Five institutions agreed to participate in this study; four of them accepted to be interviewed, and four sent AT data. The interviews were performed in 2011 and audit trail data sent in 2011 and 2012. Each AT was evaluated and compared in relation to data quality standards, namely for completeness, comprehensibility, traceability among others. Only one of the AT had enough information for us to apply a consistency evaluation by modelling user behaviour. Results The interviewees in these hospitals only knew a few AT (average of 1 AT per hospital in an estimate of 21 existing HIS), although they all recognize some advantages of analysing AT. Four hospitals sent a total of 7 AT – 2 from Radiology Information System (RIS), 2 from Picture Archiving and Communication System (PACS), 3 from Patient Records. Three of the AT were understandable and three of the AT were complete. The AT from the patient records are better structured and more complete than the RIS/PACS. Conclusions Existing AT do not have enough quality to guarantee traceability or be used in HIS improvement. Its quality reflects the importance given to them by the CIO of healthcare institutions. Existing standards (e.g. ASTM:E2147, ISO/TS 18308:2004, ISO/IEC 27001:2006) are still not broadly used in Portugal. PMID:23919501

Comparative analysis of international standards for the fatigue testing of posterior spinal fixation systems.

PubMed

Villa, Tomaso; La Barbera, Luigi; Galbusera, Fabio

2014-04-01

Preclinical evaluation of the long-term reliability of devices for lumbar fixation is a mandatory activity before they are put into market. The experimental setups are described in two different standards edited by the International Organization for Standardization (ISO) and the American Society for Testing Materials (ASTM), but the evaluation of the suitability of such tests to simulate the actual loading with in vivo situations has never been performed. To calculate through finite element (FE) simulations the stress in the rods of the fixator when subjected to ASTM and ISO standards. To compare the calculated stresses arising in the same fixator once it has been virtually mounted in a physiological environment and loaded with physiological forces and moments. FE simulations and validation experimental tests. FE models of the ISO and ASTM setups were created to conduct simulations of the tests prescribed by standards and calculate stresses in the rods. Validation of the simulations were performed through experimental tests; the same fixator was virtually mounted in an L2-L4 FE model of the lumbar spine and stresses in the rods were calculated when the spine was subjected to physiological forces and moments. The comparison between FE simulations and experimental tests showed good agreement between results obtained using the two methodologies, thus confirming the suitability of the FE method to evaluate stresses in the device in different loading situations. The usage of a physiological load with ASTM standard is impossible due to the extreme severity of the ASTM configuration; in this circumstance, the presence of an anterior support is suggested. Also, ISO prescriptions, although the choice of the setup correctly simulates the mechanical contribution of the discs, seem to overstress the device as compared with a physiological loading condition. Some daily activities, other than walking, can induce a further state of stress in the device that should be taken into account in setting up new experimental procedures. ISO standard loading prescriptions seems to be more severe than the expected physiological ones. The ASTM standard should be completed by including some anterior supporting device and declaring the value of the load to be imposed. Moreover, a further enhancement of standards would be simulating other movements representative of daily activities different from walking. Copyright © 2014 Elsevier Inc. All rights reserved.

Analysis and evaluation of the Electronic Health Record standard in China: a comparison with the American national standard ASTM E 1384.

PubMed

Xu, Wei; Guan, Zhiyu; Cao, Hongxin; Zhang, Haiyan; Lu, Min; Li, Tiejun

2011-08-01

To analyze and evaluate the newly issued Electronic Health Record (EHR) Architecture and Data Standard of China (Chinese EHR Standard) and identify areas of improvement for future revisions. We compared the Chinese EHR Standard with the standard of the American Society for Testing and Materials Standard Practice for Content and Structure of Electronic Health Records in the United States (ASTM E 1384 Standard). The comparison comprised two steps: (1) comparing the conformance of the two standards to the international standard: Health Informatics-Requirements for an Electronic Health Record Architecture (ISO/TS 18308), and showing how the architectures of the two standards satisfy or deviate from the ISO requirements and (2) comparing the detailed data structures between the two standards. Of the 124 requirement items in ISO/TS 18308, the Chinese EHR Standard and the ASTM E 1384 Standard conformed to 77 (62.1%) and 111 (89.5%), respectively. The Chinese EHR Standard conformed to 34 of 50 Structure requirements (68.0%), 22 of 24 Process requirements (91.7%), and 21 of 50 Other requirements (42.0%). The ASTM E 1384 Standard conformed to 49 of 50 Structure requirements (98.0%), 23 of 24 Process requirements (95.8%), and 39 of 40 Other requirements (78.0%). Further development of the Chinese EHR Standard should focus on supporting privacy and security mechanism, diverse data types, more generic and extensible lower level data structures, and relational attributes for data elements. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Specialty Engineering Supplement to IEEE-15288.1

DTIC Science & Technology

2015-05-15

receiver required to work in a dense EMI environment. (15) Any RF receiver with a burnout level of less than 30 dBm (1 mW). b. A summary of all...Context 2.1 ISO-IEC-IEEE-15288: 2015, Systems and Software Engineering — System life cycle processes ISO-IEC-IEEE 15288 is the DOD-adopted standard for...to ISO-15288 for application of systems engineering on defense programs that was developed by a joint services working group under the auspices of the

Model for integrated management of quality, labor risks prevention, environment and ethical aspects, applied to R&D&I and production processes in an organization

NASA Astrophysics Data System (ADS)

González, M. R.; Torres, F.; Yoldi, V.; Arcega, F.; Plaza, I.

2012-04-01

It is proposed an integrated management model for an organization. This model is based on the continuous improvement Plan-Do-Check-Act cycle and it intends to integrate the environmental, risk prevention and ethical aspects as well as research, development and innovation projects management in the general quality management structure proposed by ISO 9001:2008. It aims to fulfill the standards ISO 9001, ISO 14001, OSHAS 18001, SGE 21 y 166002.

Human-centered design of a personal health record system for metabolic syndrome management based on the ISO 9241-210:2010 standard

PubMed Central

Farinango, Charic D; Benavides, Juan S; Cerón, Jesús D; López, Diego M; Álvarez, Rosa E

2018-01-01

Background Previous studies have demonstrated the effectiveness of information and communication technologies to support healthy lifestyle interventions. In particular, personal health record systems (PHR-Ss) empower self-care, essential to support lifestyle changes. Approaches such as the user-centered design (UCD), which is already a standard within the software industry (ISO 9241-210:2010), provide specifications and guidelines to guarantee user acceptance and quality of eHealth systems. However, no single PHR-S for metabolic syndrome (MS) developed following the recommendations of the ISO 9241-210:2010 specification has been found in the literature. Objective The aim of this study was to describe the development of a PHR-S for the management of MS according to the principles and recommendations of the ISO 9241-210 standard. Methods The proposed PHR-S was developed using a formal software development process which, in addition to the traditional activities of any software process, included the principles and recommendations of the ISO 9241-210 standard. To gather user information, a survey sample of 1,187 individuals, eight interviews, and a focus group with seven people were performed. Throughout five iterations, three prototypes were built. Potential users of each system evaluated each prototype. The quality attributes of efficiency, effectiveness, and user satisfaction were assessed using metrics defined in the ISO/IEC 25022 standard. Results The following results were obtained: 1) a technology profile from 1,187 individuals at risk for MS from the city of Popayan, Colombia, identifying that 75.2% of the people use the Internet and 51% had a smartphone; 2) a PHR-S to manage MS developed (the PHR-S has the following five main functionalities: record the five MS risk factors, share these measures with health care professionals, and three educational modules on nutrition, stress management, and a physical activity); and 3) usability tests on each prototype obtaining the following results: 100% effectiveness, 100% efficiency, and 84.2 points in the system usability scale. Conclusion The software development methodology used was based on the ISO 9241-210 standard, which allowed the development team to maintain a focus on user’s needs and requirements throughout the project, which resulted in an increased satisfaction and acceptance of the system. Additionally, the establishment of a multidisciplinary team allowed the application of considerations not only from the disciplines of software engineering and health sciences but also from other disciplines such as graphical design and media communication. Finally, usability testing allowed the observation of flaws in the designs, which helped to improve the solution. PMID:29386903

IEEE Std 730 Software Quality Assurance: Supporting CMMI-DEV v1.3, Product and Process Quality Assurance

DTIC Science & Technology

2011-05-27

frameworks 4 CMMI-DEV IEEE / ISO / IEC 15288 / 12207 Quality Assurance ©2011 Walz IEEE Life Cycle Processes & Artifacts • Systems Life Cycle Processes...TAG to ISO TC 176 Quality Management • Quality: ASQ, work experience • Software: three books, consulting, work experience • Systems: Telecom & DoD...and IEEE 730 SQA need to align. The P730 IEEE standards working group has expanded the scope of the SQA process standard to align with IS 12207

Justification of system of assessment of ecological safety degree of housing construction objects

NASA Astrophysics Data System (ADS)

Kankhva, Vadim

2017-10-01

In article characteristics and properties of competitiveness of housing construction objects are investigated, criteria and points of national systems of ecological building’s standardization are structured, the compliance assessment form on stages of life cycle of a capital construction project is developed. The main indicators of level of ecological safety considering requirements of the international ISO standards 9000 and ISO 14000 and which are based on the basic principles of general quality management (TQM) are presented.

CMMI on the Web: Remastered

DTIC Science & Technology

2009-09-01

Patrick Kirwin: www.sei.cmu.edu/library/abstracts/webinars/18jul2008.cfm  Also see: www.sei.cmu.edu/prime  ISO 9001/15504/ 12207 /15288 Process...Improvement with CMMI V1.2 and ISO Standards by Boris Mutafelija and Harvey Stromberg (Book)  www.sei.cmu.edu/library/abstracts/presentations/Mutafelija

ISO-IEC MPEG-2 software video codec

NASA Astrophysics Data System (ADS)

Eckart, Stefan; Fogg, Chad E.

1995-04-01

Part 5 of the International Standard ISO/IEC 13818 `Generic Coding of Moving Pictures and Associated Audio' (MPEG-2) is a Technical Report, a sample software implementation of the procedures in parts 1, 2 and 3 of the standard (systems, video, and audio). This paper focuses on the video software, which gives an example of a fully compliant implementation of the standard and of a good video quality encoder, and serves as a tool for compliance testing. The implementation and some of the development aspects of the codec are described. The encoder is based on Test Model 5 (TM5), one of the best, published, non-proprietary coding models, which was used during MPEG-2 collaborative stage to evaluate proposed algorithms and to verify the syntax. The most important part of the Test Model is controlling the quantization parameter based on the image content and bit rate constraints under both signal-to-noise and psycho-optical aspects. The decoder has been successfully tested for compliance with the MPEG-2 standard, using the ISO/IEC MPEG verification and compliance bitstream test suites as stimuli.

Test Report - StoveTeam International, Ecocina Stove with Wood Fuel - Air Pollutant Emissions and Fuel Efficiency

EPA Science Inventory

Test results were obtained in accordance with ISO (International Organization for Standardization) IWA (International Workshop Agreement) 11:2012 that was unanimously affirmed by more than 90 stakeholders at the ISO International Workshop on Cookstoves on February 28-29, 2012 in ...

Using Performance Analysis for Training in an Organization Implementing ISO-9000 Manufacturing Practices: A Case Study.

ERIC Educational Resources Information Center

Kunneman, Dale E.; Sleezer, Catherine M.

2000-01-01

This case study examines the application of the Performance Analysis for Training (PAT) Model in an organization that was implementing ISO-9000 (International Standards Organization) processes for manufacturing practices. Discusses the interaction of organization characteristics, decision maker characteristics, and analyst characteristics to…

Test Report - CleanCook Model A1 Stove with Alcohol Fuel - Air Pollutant Emissions and Fuel Efficiency

EPA Science Inventory

Test results were obtained in accordance with ISO (International Organization for Standardization) IWA (International Workshop Agreement) 11:2012 that was unanimously affirmed by more than 90 stakeholders at the ISO International Workshop on Cookstoves on February 28-29, 2012 in ...

Using ISO 25040 standard for evaluating electronic health record systems.

PubMed

Oliveira, Marília; Novaes, Magdala; Vasconcelos, Alexandre

2013-01-01

Quality of electronic health record systems (EHR-S) is one of the key points in the discussion about the safe use of this kind of system. It stimulates creation of technical standards and certifications in order to establish the minimum requirements expected for these systems. [1] In other side, EHR-S suppliers need to invest in evaluation of their products to provide systems according to these requirements. This work presents a proposal of use ISO 25040 standard, which focuses on the evaluation of software products, for define a model of evaluation of EHR-S in relation to Brazilian Certification for Electronic Health Record Systems - SBIS-CFM Certification. Proposal instantiates the process described in ISO 25040 standard using the set of requirements that is scope of the Brazilian certification. As first results, this research has produced an evaluation model and a scale for classify an EHR-S about its compliance level in relation to certification. This work in progress is part for the acquisition of the degree of master in Computer Science at the Federal University of Pernambuco.

Test Report - In Stove 60-Liter Institutional Stove with Wood Fuel - Air Pollutant Emissions and Fuel Efficiency

EPA Science Inventory

Test results were obtained in accordance with ISO (International Organization for Standardization) IWA (International Workshop Agreement) 11:2012 that was unanimously affirmed by more than 90 stakeholders at the ISO International Workshop on Cookstoves on February 28-29, 2012 in ...

Endoscope field of view measurement.

PubMed

Wang, Quanzeng; Khanicheh, Azadeh; Leiner, Dennis; Shafer, David; Zobel, Jurgen

2017-03-01

The current International Organization for Standardization (ISO) standard (ISO 8600-3: 1997 including Amendment 1: 2003) for determining endoscope field of view (FOV) does not accurately characterize some novel endoscopic technologies such as endoscopes with a close focus distance and capsule endoscopes. We evaluated the endoscope FOV measurement method (the FOV WS method) in the current ISO 8600-3 standard and proposed a new method (the FOV EP method). We compared the two methods by measuring the FOV of 18 models of endoscopes (one device for each model) from seven key international manufacturers. We also estimated the device to device variation of two models of colonoscopes by measuring several hundreds of devices. Our results showed that the FOV EP method was more accurate than the FOV WS method, and could be used for all endoscopes. We also found that the labelled FOV values of many commercial endoscopes are significantly overstated. Our study can help endoscope users understand endoscope FOV and identify a proper method for FOV measurement. This paper can be used as a reference to revise the current endoscope FOV measurement standard.

Endoscope field of view measurement

PubMed Central

Wang, Quanzeng; Khanicheh, Azadeh; Leiner, Dennis; Shafer, David; Zobel, Jurgen

2017-01-01

The current International Organization for Standardization (ISO) standard (ISO 8600-3: 1997 including Amendment 1: 2003) for determining endoscope field of view (FOV) does not accurately characterize some novel endoscopic technologies such as endoscopes with a close focus distance and capsule endoscopes. We evaluated the endoscope FOV measurement method (the FOVWS method) in the current ISO 8600-3 standard and proposed a new method (the FOVEP method). We compared the two methods by measuring the FOV of 18 models of endoscopes (one device for each model) from seven key international manufacturers. We also estimated the device to device variation of two models of colonoscopes by measuring several hundreds of devices. Our results showed that the FOVEP method was more accurate than the FOVWS method, and could be used for all endoscopes. We also found that the labelled FOV values of many commercial endoscopes are significantly overstated. Our study can help endoscope users understand endoscope FOV and identify a proper method for FOV measurement. This paper can be used as a reference to revise the current endoscope FOV measurement standard. PMID:28663840

Photovoltaic Calibrations at the National Renewable Energy Laboratory and Uncertainty Analysis Following the ISO 17025 Guidelines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Emery, Keith

The measurement of photovoltaic (PV) performance with respect to reference conditions requires measuring current versus voltage for a given tabular reference spectrum, junction temperature, and total irradiance. This report presents the procedures implemented by the PV Cell and Module Performance Characterization Group at the National Renewable Energy Laboratory (NREL) to achieve the lowest practical uncertainty. A rigorous uncertainty analysis of these procedures is presented, which follows the International Organization for Standardization (ISO) Guide to the Expression of Uncertainty in Measurement. This uncertainty analysis is required for the team’s laboratory accreditation under ISO standard 17025, “General Requirements for the Competence ofmore » Testing and Calibration Laboratories.” The report also discusses additional areas where the uncertainty can be reduced.« less

Postoperative plasma 8-iso-prostaglandin F2α levels are associated with delirium and cognitive dysfunction in elderly patients after hip fracture surgery.

PubMed

Zheng, Yuan-Bo; Ruan, Guo-Mo; Fu, Jia-Xing; Su, Zhong-Liang; Cheng, Peng; Lu, Jian-Zuo

2016-04-01

Oxidative stress may be involved in occurrence of postoperative delirium (POD) and cognitive dysfunction (POCD). 8-iso-Prostaglandin F2α (8-iso-PGF2α), an isoprostane derived from arachidonic acid via lipid peroxidation, is considered a gold standard for measuring oxidative stress. The present study aimed to investigate the ability of postoperative plasma 8-iso-PGF2α levels to predict POD and POCD in elderly patients undergoing hip fracture surgery. Postoperative plasma 8-iso-PGF2α levels of 182 patients were measured by an enzyme-linked immunosorbent assay. We assessed the relationships between plasma 8-iso-PGF2α levels and the risk of POD and POCD using a multivariate analysis. Plasma 8-iso-PGF2α levels and age were identified as the independent predictors for POD and POCD. Based on areas under receiver operating characteristic curve, the predictive values of 8-iso-PGF2α were obviously higher than those of age for POD and POCD. In a combined logistic-regression model, 8-iso-PGF2α significantly enhanced the areas under curve of age for prediction of POD and POCD. Postoperative plasma 8-iso-PGF2α levels may have the potential to predict POD and POCD in elder patients undergoing hip fracture surgery. Copyright © 2016 Elsevier B.V. All rights reserved.

New options for optical quality tolerances

NASA Astrophysics Data System (ADS)

Aikens, Dave

2017-11-01

The optics community has long recognized the problems of misinterpretation of the surface quality specification and the potential for conflict1-2. Finally in 2017 there are new versions of the ISO and ANSI standards for surface imperfection tolerances which provide vastly improved alternatives to the existing options, especially the use of the US Military standard for specifying optical quality tolerances. This paper will review the existing standards in common use for specifying surface imperfections, and then describe in detail the new versions of the ISO and ANSI standards which are available in 2017. The details of the notations and inspection methods for each of the optics specifications will be provided, and the differences between the various alternatives will be discussed.

Theoretical considerations and measurements for phoropters

NASA Astrophysics Data System (ADS)

Zhang, Jiyan; Liu, Wenli; Sun, Jie

2008-10-01

A phoropter is one of the most popular ophthalmic instruments used in current optometry practice. The quality and verification of the instrument are of the utmost importance. In 1997, International Organization for Standardization published the first ISO standard for requirements of phoropters. However, in China, few standard and test method are suggested for phoropters. Research work on test method for phoropters was carried out early in 2004 by China National Institute of Metrology. In this paper, first, structure of phoropters is described. Then, theoretical considerations for its optical design are analyzed. Next, a newly developed instrument is introduced and measurements are taken. By calibration, the indication error of the instrument is not over 0.05m-1. Finally, measurement results show that the quality situation of phoropters is not as good as expected because of production and assembly error. Optical design shall be improved especially for combinations of both spherical and cylindrical lenses with higher power. Besides, optical requirements specified in ISO standard are found to be a little strict and hard to meet. A proposal for revision of this international standard is drafted and discussed on ISO meeting of 2007 held in Tokyo.

High resolution global gridded data for use in population studies

PubMed Central

Lloyd, Christopher T.; Sorichetta, Alessandro; Tatem, Andrew J.

2017-01-01

Recent years have seen substantial growth in openly available satellite and other geospatial data layers, which represent a range of metrics relevant to global human population mapping at fine spatial scales. The specifications of such data differ widely and therefore the harmonisation of data layers is a prerequisite to constructing detailed and contemporary spatial datasets which accurately describe population distributions. Such datasets are vital to measure impacts of population growth, monitor change, and plan interventions. To this end the WorldPop Project has produced an open access archive of 3 and 30 arc-second resolution gridded data. Four tiled raster datasets form the basis of the archive: (i) Viewfinder Panoramas topography clipped to Global ADMinistrative area (GADM) coastlines; (ii) a matching ISO 3166 country identification grid; (iii) country area; (iv) and slope layer. Further layers include transport networks, landcover, nightlights, precipitation, travel time to major cities, and waterways. Datasets and production methodology are here described. The archive can be downloaded both from the WorldPop Dataverse Repository and the WorldPop Project website. PMID:28140386

Java-Library for the Access, Storage and Editing of Calibration Metadata of Optical Sensors

NASA Astrophysics Data System (ADS)

Firlej, M.; Kresse, W.

2016-06-01

The standardization of the calibration of optical sensors in photogrammetry and remote sensing has been discussed for more than a decade. Projects of the German DGPF and the European EuroSDR led to the abstract International Technical Specification ISO/TS 19159-1:2014 "Calibration and validation of remote sensing imagery sensors and data - Part 1: Optical sensors". This article presents the first software interface for a read- and write-access to all metadata elements standardized in the ISO/TS 19159-1. This interface is based on an xml-schema that was automatically derived by ShapeChange from the UML-model of the Specification. The software interface serves two cases. First, the more than 300 standardized metadata elements are stored individually according to the xml-schema. Secondly, the camera manufacturers are using many administrative data that are not a part of the ISO/TS 19159-1. The new software interface provides a mechanism for input, storage, editing, and output of both types of data. Finally, an output channel towards a usual calibration protocol is provided. The interface is written in Java. The article also addresses observations made when analysing the ISO/TS 19159-1 and compiles a list of proposals for maturing the document, i.e. for an updated version of the Specification.

Comparison of ICare and IOPen vs Goldmann applanation tonometry according to international standards 8612 in glaucoma patients.

PubMed

Pahlitzsch, Milena; Brünner, Jeanette; Gonnermann, Johannes; Maier, Anna-Karina B; Torun, Necip; Bertelmann, Eckart; Klamann, Matthias Kj

2016-01-01

To compare IOPen and ICare rebound tonometry to Goldmann applanation tonometry (GAT) according to International Standards Organization (ISO) 8612 criteria. Totally 191 eyes ( n =107 individuals) were included. Criteria of ISO 8612 were fulfilled: 3 clusters of IOP, measured by GAT, were formed. The GAT results were given as mean±standard deviation. GAT (19.7±0.5 mm Hg) showed a significant correlation to ICare (19.8±0.5 mm Hg) ( r =0.547, P <0.001) and IOPen (19.5±0.5 mm Hg) ( r =0.526, P <0.001). According to ISO 8612 criteria in all 3 IOP groups the number of outliers (of the 95% limits of agreement) exceeded 5% for ICare and IOPen vs GAT: No.1 ( n =68) 29.4% and 22.1%, No.2 ( n =62) 35.5% and 37.1%, No.3 ( n =61) 26.2% and 42.6%, respectively. The strict requirements of the ISO 8612 are not fulfilled in a glaucoma collective by ICare and IOPen at present. As long as the Goldmann tonometry is applicable it should be used first of all for reproducible IOP readings. ICare and IOPen tonometry should be considered as an alternative tool, if application of Goldmann tonometry is not possible.

Enabling interoperability in planetary sciences and heliophysics: The case for an information model

NASA Astrophysics Data System (ADS)

Hughes, J. Steven; Crichton, Daniel J.; Raugh, Anne C.; Cecconi, Baptiste; Guinness, Edward A.; Isbell, Christopher E.; Mafi, Joseph N.; Gordon, Mitchell K.; Hardman, Sean H.; Joyner, Ronald S.

2018-01-01

The Planetary Data System has developed the PDS4 Information Model to enable interoperability across diverse science disciplines. The Information Model is based on an integration of International Organization for Standardization (ISO) level standards for trusted digital archives, information model development, and metadata registries. Where controlled vocabularies provides a basic level of interoperability by providing a common set of terms for communication between both machines and humans the Information Model improves interoperability by means of an ontology that provides semantic information or additional related context for the terms. The information model was defined by team of computer scientists and science experts from each of the diverse disciplines in the Planetary Science community, including Atmospheres, Geosciences, Cartography and Imaging Sciences, Navigational and Ancillary Information, Planetary Plasma Interactions, Ring-Moon Systems, and Small Bodies. The model was designed to be extensible beyond the Planetary Science community, for example there are overlaps between certain PDS disciplines and the Heliophysics and Astrophysics disciplines. "Interoperability" can apply to many aspects of both the developer and the end-user experience, for example agency-to-agency, semantic level, and application level interoperability. We define these types of interoperability and focus on semantic level interoperability, the type of interoperability most directly enabled by an information model.

Research into alternative network approaches for space operations

NASA Technical Reports Server (NTRS)

Kusmanoff, Antone L.; Barton, Timothy J.

1990-01-01

The main goal is to resolve the interoperability problem of applications employing DOD TCP/IP (Department of Defence Transmission Control Protocol/Internet Protocol) family of protocols on a CCITT/ISO based network. The objective is to allow them to communicate over the CCITT/ISO protocol GPLAN (General Purpose Local Area Network) network without modification to the user's application programs. There were two primary assumptions associated with the solution that was actually realized. The first is that the solution had to allow for future movement to the exclusive use of the CCITT/ISO standards. The second is that the solution had to be software transparent to the currently installed TCP/IP and CCITT/ISO user application programs.

Natural wrapping paper from banana (Musa paradisiaca Linn) peel waste with additive essential oils

NASA Astrophysics Data System (ADS)

Widiastuti Agustina, E. S.; Elfi Susanti, V. H.

2018-05-01

The research aimed to produce natural wrapping paper from banana (Musa Paradisiaca Linn.) peel waste with additive essentials oils. The method used in this research was alkalization. The delignification process is done with the use of NaOH 4% at the temperature of 100°C for 1.5 hours. Additive materials in the form of essential oils are added as a preservative and aroma agent, namely cinnamon oil, lemon oil, clove oil and lime oil respectively 2% and 3%. Chemical and physical properties of the produced papers are tested included water content (dry-oven method SNI ISO 287:2010), pH (SNI ISO 6588-1.2010), grammage (SNI ISO 536:2010) and brightness (SNI ISO 2470:2010). Testing results of each paper were compared with commercial wrapping paper. The result shows that the natural paper from banana peel waste with additive essential oil meets the standard of ISO 6519:2016 about Basic Paper for Laminated Plastic Wrapping Paper within the parameter of pH and water content. The paper produced also meet the standard of ISO 8218:2015 about Food Paper and Cardboard within the grammage parameter (high-grade grammage), except the paper with 2% lemon oil. The paper which is closest to the characteristic of commercial wrapping paper is the paper with the additive of 2% cinnamon oil, with pH of 6.95, the water content of 7.14%, grammage of 347.6 gram/m2 and the brightness level of 24.68%.

EMODnet Physics: open and free marine physical data for science and for society

NASA Astrophysics Data System (ADS)

Nolan, G.; Novellino, A.; Gorringe, P.; Manzella, G. M. R., Sr.; Schaap, D.; Pouliquen, S.; Richards, L.

2016-02-01

Europe is sustaining a long term strategy on Blue Growth, looking at seas and oceans as drivers for innovation and growth. A number of weaknesses have been identified, among which gaps in knowledge and data about the state of our oceans, seabed resources, marine life and risks to habitats and ecosystems. European Marine Observation and Data Network (EMODnet) has been created to improve the usefulness to European users for scientific, regulatory and commercial purposes of observations and the resulting marine data collected and held by European public and private bodies. EMODNet Physics is providing access to archived and real time data catalog on the physical condition in Europe's seas and oceans. The overall objectives are to provide access to archived and near real-time data on physical conditions in Europe's seas and oceans by means of a dedicated portal and to determine how well the data meet the needs of users from industry, public authorities and scientists. EMODnet Physics is contributing to the broader initiative 'Marine Knowledge 2020', and in particular to the implementation of the European Copernicus programme, an EU-wide programme that aims to support policymakers, business, and citizens with improved environmental information. In the global context, Copernicus is an integral part of the Global Earth Observation System of Systems. Near real time data and metadata are populated by data owners, organized at EuroGOOS level according its regional operational systems (ROOSs) infrastructure and conventions and made available with the EMODnet Physics user interface. Latest 60 days are freely viewable and downloadable while the access to older data (monthly archives) request credentials. Archived data series and metadata are organized according and in collaboration with NODCs network (SeaDataNet). Access to data and metadata consider measurements on winds at the sea surface, waves, temperature and salinity, water velocities, light attenuation, sea level and ice coverage. EMODnet Physics has the specific objective of processing physical data into interoperable formats which includes agreed standards, common baselines or reference conditions; assessments of their accuracy and precision. The data and metadata are accessible through an ISO, OGC, INSPIRE compliant portal that is operational 24/7.

Epidemiological evidence for new frequency weightings of hand-transmitted vibration.

PubMed

Bovenzi, Massimo

2012-01-01

This paper provides an overview of the exposure-response relationship for the vascular component of the hand-arm vibration syndrome, called vibration-induced white finger (VWF). Over the past two decades, several epidemiological studies have shown a poor agreement between the risk for VWF observed in various occupational groups and that predicted by models included in annexes to International Standard ISO 5349 (ISO 5349:1986, ISO 5349-1:2001). Either overestimation or underestimation of the occurrence of VWF have been reported by investigators. It has been argued that the current ISO frequency-weighting curve for hand-transmitted vibration, which assumes that vibration-induced adverse health effects are inversely related to the frequency of vibration between 16 and 1250 Hz, may be unsuitable for the assessment of VWF. To investigate this issue, a prospective cohort study was carried out to explore the performance of four alternative frequency weightings for hand-transmitted vibration to predict the incidence of VWF in groups of forestry and stone workers. The findings of this study suggested that measures of vibration exposure which give relatively more weight to intermediate and high frequency vibration produced better predictions of the incidence of VWF than that obtained with the frequency weighting currently recommended in International Standard ISO 5349-1:2001.

Environmental Health Standards for Human Spacecraft

NASA Technical Reports Server (NTRS)

James John T.

2010-01-01

The discussion of air and water quality standards includes evidence-based standards, factors unique to spaceflight, effects from exposures to combinations of compounds, contingency versus nominal standards, tables of ISO standards for air quality (ppm) and water quality (mg/L), and updating of standards.

Evaluation of Whole-Body Vibration in Vehicles

NASA Astrophysics Data System (ADS)

PADDAN, G. S.; GRIFFIN, M. J.

2002-05-01

The vibration in 100 different vehicles has been measured, evaluated and assessed according to British Standard BS 6841 (1987) and International Standard ISO 2631 (1997). Vibration was measured in 14 categories of vehicle including cars, lift trucks, tractors, lorries, vans and buses. In each vehicle, the vibration was measured in five axes: vertical vibration beneath the seat, fore-and-aft, lateral and vertical vibration on the seat pan and fore-and-aft vibration at the backrest. The alternative methods of evaluating the vibration (use of different frequency weightings, different averaging methods, the inclusion of different axes, vibration dose values and equivalent r.m.s. acceleration) as defined in the standards have been compared. BS 6841 (1987) suggests that an equivalent acceleration magnitude is calculated using vibration measured at four locations around the seat (x -, y -, z -seat and x -backrest); ISO 2631 (1997) suggests that vibration is measured in the three translational axes only on the seat pan but only the axis with the most severe vibration is used to assess vibration severity. Assessments made using the procedure defined in ISO 2631 tend to underestimate any risks from exposure to whole-body vibration compared to an evaluation made using the guidelines specified in BS 6841; the measurements indicated that the 17 m/s1.75 “health guidance caution zone” in ISO 2631 was less likely to be exceeded than the 15 m/s1.75 “action level” in BS 6841. Consequently, ISO 2631 “allows” appreciably longer daily exposures to whole-body vibration than BS 6841.

Inter-laboratory trial of a standardized sediment contact test with the aquatic plant Myriophyllum aquaticum (ISO 16191).

PubMed

Feiler, Ute; Ratte, Monika; Arts, Gertie; Bazin, Christine; Brauer, Frank; Casado, Carmen; Dören, Laszlo; Eklund, Britta; Gilberg, Daniel; Grote, Matthias; Gonsior, Guido; Hafner, Christoph; Kopf, Willi; Lemnitzer, Bernd; Liedtke, Anja; Matthias, Uwe; Okos, Ewa; Pandard, Pascal; Scheerbaum, Dirk; Schmitt-Jansen, Mechthild; Stewart, Kathleen; Teodorovic, Ivana; Wenzel, Andrea; Pluta, Hans-Jürgen

2014-03-01

A whole-sediment toxicity test with Myriophyllum aquaticum has been developed by the German Federal Institute of Hydrology and standardized within the International Organization for Standardization (ISO; ISO 16191). An international ring-test was performed to evaluate the precision of the test method. Four sediments (artificial, natural) were tested. Test duration was 10 d, and test endpoint was inhibition of growth rate (r) based on fresh weight data. Eighteen of 21 laboratories met the validity criterion of r ≥ 0.09 d(-1) in the control. Results from 4 tests that did not conform to test-performance criteria were excluded from statistical evaluation. The inter-laboratory variability of growth rates (20.6%-25.0%) and inhibition (26.6%-39.9%) was comparable with the variability of other standardized bioassays. The mean test-internal variability of the controls was low (7% [control], 9.7% [solvent control]), yielding a high discriminatory power of the given test design (median minimum detectable differences [MDD] 13% to 15%). To ensure these MDDs, an additional validity criterion of CV ≤ 15% of the growth rate in the controls was recommended. As a positive control, 90 mg 3,5-dichlorophenol/kg sediment dry mass was tested. The range of the expected growth inhibition was proposed to be 35 ± 15%. The ring test results demonstrated the reliability of the ISO 16191 toxicity test and its suitability as a tool to assess the toxicity of sediment and dredged material. © 2013 SETAC.

36 CFR 1238.14 - What are the microfilming requirements for permanent and unscheduled records?

Code of Federal Regulations, 2014 CFR

2014-07-01

... accordance with ISO 18901 (incorporated by reference, see § 1238.5) and use the processing procedures in ANSI... § 1238.5). (2) Background density of images. Agencies must use the background ISO standard visual diffuse... transmission density. (i) Recommended visual diffuse transmission background densities for images of documents...

36 CFR 1238.14 - What are the microfilming requirements for permanent and unscheduled records?

Code of Federal Regulations, 2011 CFR

2011-07-01

... accordance with ISO 18901 (incorporated by reference, see § 1238.5) and use the processing procedures in ANSI... § 1238.5). (2) Background density of images. Agencies must use the background ISO standard visual diffuse... transmission density. (i) Recommended visual diffuse transmission background densities for images of documents...

36 CFR 1238.14 - What are the microfilming requirements for permanent and unscheduled records?

Code of Federal Regulations, 2012 CFR

2012-07-01

... accordance with ISO 18901 (incorporated by reference, see § 1238.5) and use the processing procedures in ANSI... § 1238.5). (2) Background density of images. Agencies must use the background ISO standard visual diffuse... transmission density. (i) Recommended visual diffuse transmission background densities for images of documents...

Using TQM and ISO 9000 Principles in Assuring Education Service Quality.

ERIC Educational Resources Information Center

Kabashkin, Igor; Michnev, Boris; Utchin, Georgy

1998-01-01

Describes Riga Aviation University's movement from a controlled professional-education program to a system of contract relations with students as education service customers. Discusses a study of students' demands, requirements, and issues and the development of a quality assurance system based on Total Quality Management and ISO 9000 standards.…

Diversifying the Department of Defense Network Enterprise with Linux

DTIC Science & Technology

2010-03-01

Cyberspace, Cyberwar, Legacy, Inventory, Acquisition, Competitive Advantage, Coalition Communications, Ubiquitous, Strategic, Centricity, Kaizen , ISO... Kaizen , ISO, Outsource CLASSIFICATION: Unclassified Historically, the United States and its closest allies have grown increasingly reliant...control through the use of continuous improvement processes ( Kaizen )34. In choosing the Linux client operating system, the move encourages open standards

[ISO 9002 at the Center of Pediatric Intensive Care at the Albert Einstein Israeli Hospital].

PubMed

Gé Lacerda, D P; Rocha, M L; Santos, R P

2000-01-01

This study shows the process of implementation of a quality program in Pediatric Intensive Therapy Center of "Hospital Israelita Albert Einstein" which resulted in the certification of this service for the Standards ISO 9002/94. It points out the nurse's role as a leader in this process.

Determination of Compressive Properties of Fibre Composites in the In-plane Direction According to ISO 14126. Part 1: A Round Robin Test

NASA Astrophysics Data System (ADS)

Schneider, Konrad

2007-01-01

Over the years different tests are established to characterise the compressive properties of composites in the in-plane direction. The international standard ISO 14126 (2000) (Fibre-reinforced plastic composites — determination of compressive properties in the in-plane direction, ISO 14126: 1999 (E), Faserverstärkte Kunststoffe, Bestimmung der Druckeigenschaften in der Laminatebene, DIN EN ISO 14126: 2000-12) tries to standardise these tests. The described wide range of arrangements enables to continue with the present practice to a large extent. But the standard doesn’t say anything about the precision of the method. Four labs performed a round robin test to check the precision and reproducibility of the Celanese-type arrangement for different composite materials, structures and dimensions. The test procedure is critically discussed and some proposals for the applicability of the method are derived. Mainly the advantages of optical monitoring the overall as well as the local strain of the specimen are demonstrated for the characterisation the failure process. By this method some of the reasons of unsatisfying reproducibility can be cleared up.

A comparative analysis of quality management standards for contract research organisations in clinical trials.

PubMed

Murray, Elizabeth; McAdam, Rodney

2007-01-01

This article compares and contrasts the main quality standards in the highly regulated pharmaceutical industry with specific focus on Good Clinical Practice (GCP), the standard for designing, conducting, recording and reporting clinical trials involving human participants. Comparison is made to ISO quality standards, which can be applied to all industries and types of organisation. The study is then narrowed to that of contract research organisations (CROs) involved in the conduct of clinical trials. The paper concludes that the ISO 9000 series of quality standards can act as a company-wide framework for quality management within such organisations by helping to direct quality efforts on a long-term basis without any loss of compliance. This study is valuable because comparative analysis in this domain is uncommon.

77 FR 60629 - Administrative Simplification: Adoption of a Standard for a Unique Health Plan Identifier...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-04

... International Organization for Standardization (ISO) Standard, we inadvertently mischaracterized a public... Secretary finds, for good cause, that the notice and comment process is impracticable, unnecessary, or...

The Implications of ISO 9000 and the European Community on the U.S. Construction Industry.

DTIC Science & Technology

1992-08-01

center in the world: the U.S., Japan, and finally the EC. History and Development The EC began as an organization following World War II along with...benefit to participate in the standard development process (Dorris 1990). ISO 9000 History Quality has been an issue for many years both in the U.S...5750:1987 Italy UN/EN 29000 USA ANSI/ASQC Q90 Japan JIB Z 9900 Yugoslavia JUS-ISO 9000 Malaysia NS-I80 9000 Zimbabwe SAZ 300 EQUIVALENT China GB/T

Compact, Lightweight, Smart Battery Charger

DTIC Science & Technology

2005-10-26

with MIL-l- 45208A, ANSI/NCSL Z540-1-1994 and ISO / IEC 17025 :1999. I... lii i ... ...... , .00 0z .E 0 cc z0 E -𔃺’ 200-076 Temperature Honeywell...Institute of Standards and Technology, and in accordance with MIL-I- 45208A, ANSI/NCSL Z540-1-1994 and ISO / IEC 17025 :1999. Recorder 200-202 Temperature JO...1994 and ISO / IEC 17025 :1999. Recorder 200-214 Temperature Watlow F4 7/17/2003 7/18/2005 -200 to +80~0°C Controller 500-061 Thermal Cincinnati VTS-3.3

A pan-European ring trial to validate an International Standard for detection of Vibrio cholerae, Vibrio parahaemolyticus and Vibrio vulnificus in seafoods.

PubMed

Hartnell, R E; Stockley, L; Keay, W; Rosec, J-P; Hervio-Heath, D; Van den Berg, H; Leoni, F; Ottaviani, D; Henigman, U; Denayer, S; Serbruyns, B; Georgsson, F; Krumova-Valcheva, G; Gyurova, E; Blanco, C; Copin, S; Strauch, E; Wieczorek, K; Lopatek, M; Britova, A; Hardouin, G; Lombard, B; In't Veld, P; Leclercq, A; Baker-Austin, C

2018-02-10

Globally, vibrios represent an important and well-established group of bacterial foodborne pathogens. The European Commission (EC) mandated the Comite de European Normalisation (CEN) to undertake work to provide validation data for 15 methods in microbiology to support EC legislation. As part of this mandated work programme, merging of ISO/TS 21872-1:2007, which specifies a horizontal method for the detection of V. parahaemolyticus and V. cholerae, and ISO/TS 21872-2:2007, a similar horizontal method for the detection of potentially pathogenic vibrios other than V. cholerae and V. parahaemolyticus was proposed. Both parts of ISO/TS 21872 utilized classical culture-based isolation techniques coupled with biochemical confirmation steps. The work also considered simplification of the biochemical confirmation steps. In addition, because of advances in molecular based methods for identification of human pathogenic Vibrio spp. classical and real-time PCR options were also included within the scope of the validation. These considerations formed the basis of a multi-laboratory validation study with the aim of improving the precision of this ISO technical specification and providing a single ISO standard method to enable detection of these important foodborne Vibrio spp.. To achieve this aim, an international validation study involving 13 laboratories from 9 countries in Europe was conducted in 2013. The results of this validation have enabled integration of the two existing technical specifications targeting the detection of the major foodborne Vibrio spp., simplification of the suite of recommended biochemical identification tests and the introduction of molecular procedures that provide both species level identification and discrimination of putatively pathogenic strains of V. parahaemolyticus by the determination of the presence of theromostable direct and direct related haemolysins. The method performance characteristics generated in this have been included in revised international standard, ISO 21872:2017, published in July 2017. Copyright © 2018. Published by Elsevier B.V.

Integrated management system: The integration of ISO 9001, ISO 14001, OHSAS 18001 and ISO 31000

NASA Astrophysics Data System (ADS)

Muzaimi, Hafizzudin; Chew, Boon Cheong; Hamid, Syaiful Rizal

2017-03-01

The implementation of integrated management system (IMS) for better quality management has become a preference for many organizations. This can be seen as many organizations used the combination of quality ISO 9001, an environment ISO 14001 and occupational health and safety management system OHSAS 18001 as a core for the IMS that largely implemented. Besides, the linked between quality management with risk management system need to be identified as the management system that enhance the effectiveness of IMS. Therefore, the risk management system ISO 31000 also presented as a part of integration. In nowadays competitive environment, the increasing pressure and needs from customer or stakeholders make it compulsory for the organization to propose the new system and standards. This paper presents and discusses about the benefit of integration, the management system components that can be converged and the implementation approach. A series of interview was conducted through in-depth interviews with 8 experts in this field, while data collected were analyzed qualitatively. The results consist of 16 factors of IMS implementation that have been identified and the use of PDCA approach for an effective implementation of IMS. As a conclusion, the paper proposes the integration of four management systems (ISO 9001, ISO 14001, OHSAS 18001 and ISO 31000) and on how the IMS can be used to structure the process of management for quality management towards sustainability practices in the organization.

Best Practices for International Collaboration and Applications of Interoperability within a NASA Data Center

NASA Astrophysics Data System (ADS)

Moroni, D. F.; Armstrong, E. M.; Tauer, E.; Hausman, J.; Huang, T.; Thompson, C. K.; Chung, N.

2013-12-01

The Physical Oceanographic Distributed Active Archive Center (PO.DAAC) is one of 12 data centers sponsored by NASA's Earth Science Data and Information System (ESDIS) project. The PO.DAAC is tasked with archival and distribution of NASA Earth science missions specific to physical oceanography, many of which have interdisciplinary applications for weather forecasting/monitoring, ocean biology, ocean modeling, and climate studies. PO.DAAC has a 20-year history of cross-project and international collaborations with partners in Europe, Japan, Australia, and the UK. Domestically, the PO.DAAC has successfully established lasting partners with non-NASA institutions and projects including the National Oceanic and Atmospheric Administration (NOAA), United States Navy, Remote Sensing Systems, and Unidata. A key component of these partnerships is PO.DAAC's direct involvement with international working groups and science teams, such as the Group for High Resolution Sea Surface Temperature (GHRSST), International Ocean Vector Winds Science Team (IOVWST), Ocean Surface Topography Science Team (OSTST), and the Committee on Earth Observing Satellites (CEOS). To help bolster new and existing collaborations, the PO.DAAC has established a standardized approach to its internal Data Management and Archiving System (DMAS), utilizing a Data Dictionary to provide the baseline standard for entry and capture of dataset and granule metadata. Furthermore, the PO.DAAC has established an end-to-end Dataset Lifecycle Policy, built upon both internal and external recommendations of best practices toward data stewardship. Together, DMAS, the Data Dictionary, and the Dataset Lifecycle Policy provide the infrastructure to enable standardized data and metadata to be fully ingested and harvested to facilitate interoperability and compatibility across data access protocols, tools, and services. The Dataset Lifecycle Policy provides the checks and balances to help ensure all incoming HDF and netCDF-based datasets meet minimum compliance requirements with the Lawrence Livermore National Laboratory's actively maintained Climate and Forecast (CF) conventions with additional goals toward metadata standards provided by the Attribute Convention for Dataset Discovery (ACDD), the International Organization for Standardization (ISO) 19100-series, and the Federal Geographic Data Committee (FGDC). By default, DMAS ensures all datasets are compliant with NASA's Global Change Master Directory (GCMD) and NASA's Reverb data discovery clearinghouse (also known as ECHO). For data access, PO.DAAC offers several widely-used technologies, including File Transfer Protocol (FTP), Open-source Project for a Network Data Access Protocol (OPeNDAP), and Thematic Realtime Environmental Distributed Data Services (THREDDS). These access technologies are available directly to users or through PO.DAAC's web interfaces, specifically the High-level Tool for Interactive Data Extraction (HiTIDE), Live Access Server (LAS), and PO.DAAC's set of search, image, and Consolidated Web Services (CWS). Lastly, PO.DAAC's newly introduced, standards-based CWS provide singular endpoints for search, imaging, and extraction capabilities, respectively, across L2/L3/L4 datasets. Altogether, these tools, services and policies serve to provide flexible, interoperable functionality for both users and data providers.

Reinterpreting the best biomarker of oxidative stress: The 8-iso-PGF(2α)/PGF(2α) ratio distinguishes chemical from enzymatic lipid peroxidation.

PubMed

van 't Erve, Thomas J; Lih, Fred B; Kadiiska, Maria B; Deterding, Leesa J; Eling, Thomas E; Mason, Ronald P

2015-06-01

The biomarker 8-iso-prostaglandin F2α (8-iso-PGF2α) is regarded as the gold standard for detection of excessive chemical lipid peroxidation in humans. However, biosynthesis of 8-iso-PGF2α via enzymatic lipid peroxidation by prostaglandin-endoperoxide synthases (PGHSs), which are significantly induced in inflammation, could lead to incorrect biomarker interpretation. To resolve the ambiguity with this biomarker, the ratio of 8-iso-PGF2α to prostaglandin F2α (PGF2α) is established as a quantitative measure to distinguish enzymatic from chemical lipid peroxidation in vitro, in animal models, and in humans. Using this method, we find that chemical lipid peroxidation contributes only 3% to the total 8-iso-PGF2α in the plasma of rats. In contrast, the 8-iso-PGF2α levels in plasma of human males are generated >99% by chemical lipid peroxidation. This establishes the potential for an alternate pathway of biomarker synthesis, and draws into question the source of increases in 8-iso-PGF2α seen in many human diseases. In conclusion, increases in 8-iso-PGF2α do not necessarily reflect increases in oxidative stress; therefore, past studies using 8-iso-PGF2α as a marker of oxidative stress may have been misinterpreted. The 8-iso-PGF2α/PGF2α ratio can be used to distinguish biomarker synthesis pathways and thus confirm the potential change in oxidative stress in the myriad of disease and chemical exposures known to induce 8-iso-PGF2α. Published by Elsevier Inc.

Systems Engineering and Management Applications of ISO 9001:2015 for Government

NASA Technical Reports Server (NTRS)

Shepherd, Christena C.

2016-01-01

The manufacturing segment of the business world is busy assessing the impact of ISO 9001:2015, and updating their management systems to meet the required compliance date. What does the new revision mean for government agencies that deliver large engineering projects rather than mass production? In fact, the standard, especially the new revision, can be used quite readily for government agencies, or applied to specific projects, once it is understood in terms of the similarities with systems engineering and project management. From there it can be extrapolated to "mission realization" systems, and a Quality Management System (QMS) is a logical result that can bring order to processes and systems that likely already exist in some fashion. ISO 9001:2015 is less product-oriented than previous versions. It can be more broadly applied to public organizations as well as private; and to services (missions) as well as products. The emphasis on risk management in the revised standard provides the needed balance for weighing decisions with respect to cost, schedule, technical, safety, and regulatory compliance; so if this is not part of agency governance already, this is a good place to start, especially for large engineering projects. The Systems Engineering standard used for this analysis is from NASA's NPR 7123.1 NASA Systems Engineering Processes and Requirements; however, those who are more familiar with ISO/IEC 26702 Systems Engineering-application and management of the systems engineering process, or SAE/EIA 632 Processes for Engineering a System will also recognize the similarities. In reality, the QMS outlined by ISO 9001 reinforces the systems engineering processes, and serves to ensure that they are adequately implemented, although most of the ISO 9001 literature emphasizes the production and process aspects of the standard. Rather than beginning with ISO 9001and getting lost in the vocabulary, it is useful to begin with the systems engineering lifecycle. Identification of stakeholder expectations, identifying solutions, creating specific product or service designs, production of the product or service, delivery to the public, and the associated management, planning, and control processes, are a familiar place to begin thinking of the overall system of identifying, designing, and competing a project or mission. Lining up this lifecycle with the ISO requirements (see Figure 1) illustrates how a quality management system is concerned with the same processes, and provides a governance and assurance function. If implemented properly, there are cost savings resulting from less rework, repair, reprocessing, failures, misplaced documents, and similar types of deficiencies1. Starting with an organization's systems engineering processes allows the organization to use their own terminology for a QMS plan, and tailor the plan to their own project or organization, so that it is more easily developed, understood, and implemented.

From ISO 9001:2008 to ISO 9001:2015: Significant changes and their impacts to aspiring organizations

NASA Astrophysics Data System (ADS)

Sari, Y.; Wibisono, E.; Wahyudi, R. D.; Lio, Y.

2017-11-01

ISO 9001:2015 is the latest version of ISO Quality Management System standard that has been updated recently from ISO 9001:2008. It is necessary for all organizations that have implemented and been certified with ISO 9001:2008 to prepare the transition and upgrade their Quality Management System because the certification will expire by September 2018. This paper attempts to provide knowledge on the significant changes from ISO 9001:2008 to ISO 9001:2015, what new requirements are added, and how they would impact the organizations. An exploratory and applied research was chosen as the research approach and aimed to explore what transition designs are needed to anticipate the changes as well as their impacts. The research applied a methodology of Plan-Do-Check-Action (PDCA) cycle into four organizations and their results were compared and discussed to explain the transition designs. Some qualitative methods such as observation and interview were used to collect the data. By addressing the new requirements, three transition designs that should be prepared are: (i) identifying needs from interested parties, (ii) analyzing internal and external factors of the organizations to formulate relevant strategies and quality objectives, and (iii) registering risks associated to business processes as well as organizational strategies.

Collaborative Preservation of At-Risk Data at NOAA's National Centers for Environmental Information

NASA Astrophysics Data System (ADS)

Casey, K. S.; Collins, D.; Cooper, J. M.; Ritchey, N. A.

2017-12-01

The National Centers for Environmental Information (NCEI) serves as the official long term archive of NOAA's environmental data. Adhering to the principles and responsibilities of the Open Archival Information System (OAIS, ISO 14721), and backed by both agency policies and formal legislation, NCEI ensures that these irreplaceable environmental data are preserved and made available for current users and future generations. These goals are achieved through regional, national, and international collaborative efforts like the ICSU World Data System, the Intergovernmental Oceanographic Commission's International Oceanographic Data and Information Exchange (IODE) program, NSF's DataOne, and through specific data preservation projects with partners such as the NOAA Cooperative Institutes, ESIP, and even retired federal employees. Through efforts like these, at-risk data with poor documentation, on aging media, and of unknown format and content are being rescued and made available to the public for widespread reuse.

Advanced Acoustic Model Technical Reference and User Manual

DTIC Science & Technology

2010-09-01

loss (point source). Aatm = ANSI/ ISO atmospheric absorption standard.28 Agrd = Ground reflection and attenuation losses, caused by the ground and the...433.2 1,021.8 25000 788 429.6 1,017.6 26000 754 426.1 1,013.4 27000 722 422.5 1,009.2 28000 691 418.9 1,004.9 29000 660 415.4 1,000.6 30000 631...ANSI/ ISO standard.28 Examples of the weather effects are described here. Consider a situation with winds approximately blowing from NW to SE. Figure 2

U.S. Geological Survey, remote sensing, and geoscience data: Using standards to serve us all

USGS Publications Warehouse

Benson, Michael G.; Faundeen, John L.

2000-01-01

The U.S. Geological Survey (USGS) advocates the use of standards with geosciences and remotely sensed data and metadata for its own purposes and those of its customers. In activities that range from archiving data to making a product, the incorporation of standards makes these functions repeatable and understandable. More important, when accepted standards are followed, data discovery and sharing can be more efficient and the overall value to society can be expanded. The USGS archives many terabytes of digital geoscience and remotely sensed data. Several million photographs are also available to the research community. To manage these vast holdings and ensure that strict preservation and high usability criteria are observed, the USGS uses standards within the archival, data management, public access and ordering, and data distribution areas. The USGS uses Federal and international standards in performing its role as the U.S. National Satellite Land Remote Sensing Data Archive and in its mission as the long-term archive and production center for aerial photographs and cartographic data covering the United States.

ESO science data product standard for 1D spectral products

NASA Astrophysics Data System (ADS)

Micol, Alberto; Arnaboldi, Magda; Delmotte, Nausicaa A. R.; Mascetti, Laura; Retzlaff, Joerg

2016-07-01

The ESO Phase 3 process allows the upload, validation, storage, and publication of reduced data through the ESO Science Archive Facility. Since its introduction, 2 million data products have been archived and published; 80% of them are one-dimensional extracted and calibrated spectra. Central to Phase3 is the ESO science data product standard that defines metadata and data format of any product. This contribution describes the ESO data standard for 1d-spectra, its adoption by the reduction pipelines of selected instrument modes for in-house generation of reduced spectra, the enhanced archive legacy value. Archive usage statistics are provided.

Defining the Core Archive Data Standards of the International Planetary Data Alliance (IPDA)

NASA Technical Reports Server (NTRS)

Hughes, J. Steven; Crichton, Dan; Beebe, Reta; Guinness, Ed; Heather, David; Zender, Joe

2007-01-01

A goal of the International Planetary Data Alliance (lPDA) is to develop a set of archive data standards that enable the sharing of scientific data across international agencies and missions. To help achieve this goal, the IPDA steering committee initiated a six month proj ect to write requirements for and draft an information model based on the Planetary Data System (PDS) archive data standards. The project had a special emphasis on data formats. A set of use case scenarios were first developed from which a set of requirements were derived for the IPDA archive data standards. The special emphasis on data formats was addressed by identifying data formats that have been used by PDS nodes and other agencies in the creation of successful data sets for the Planetary Data System (PDS). The dependency of the IPDA information model on the PDS archive standards required the compilation of a formal specification of the archive standards currently in use by the PDS. An ontology modelling tool was chosen to capture the information model from various sources including the Planetary Science Data Dictionary [I] and the PDS Standards Reference [2]. Exports of the modelling information from the tool database were used to produce the information model document using an object-oriented notation for presenting the model. The tool exports can also be used for software development and are directly accessible by semantic web applications.

Comparative Evaluations of Randomly Selected Four Point-of-Care Glucometer Devices in Addis Ababa, Ethiopia.

PubMed

Wolde, Mistire; Tarekegn, Getahun; Kebede, Tedla

2018-05-01

Point-of-care glucometer (PoCG) devices play a significant role in self-monitoring of the blood sugar level, particularly in the follow-up of high blood sugar therapeutic response. The aim of this study was to evaluate blood glucose test results performed with four randomly selected glucometers on diabetes and control subjects versus standard wet chemistry (hexokinase) methods in Addis Ababa, Ethiopia. A prospective cross-sectional study was conducted on randomly selected 200 study participants (100 participants with diabetes and 100 healthy controls). Four randomly selected PoCG devices (CareSens N, DIAVUE Prudential, On Call Extra, i-QARE DS-W) were evaluated against hexokinase method and ISO 15197:2003 and ISO 15197:2013 standards. The minimum and maximum blood sugar values were recorded by CareSens N (21 mg/dl) and hexokinase method (498.8 mg/dl), respectively. The mean sugar values of all PoCG devices except On Call Extra showed significant differences compared with the reference hexokinase method. Meanwhile, all four PoCG devices had strong positive relationship (>80%) with the reference method (hexokinase). On the other hand, none of the four PoCG devices fulfilled the minimum accuracy measurement set by ISO 15197:2003 and ISO 15197:2013 standards. In addition, the linear regression analysis revealed that all four selected PoCG overestimated the glucose concentrations. The overall evaluation of the selected four PoCG measurements were poorly correlated with standard reference method. Therefore, before introducing PoCG devices to the market, there should be a standardized evaluation platform for validation. Further similar large-scale studies on other PoCG devices also need to be undertaken.

Restoration, Enhancement, and Distribution of the ATLAS-1 Imaging Spectrometric Observatory (ISO) Space Science Data Set

NASA Technical Reports Server (NTRS)

Germany, G. A.

2001-01-01

The primary goal of the funded task was to restore and distribute the ISO ATLAS-1 space science data set with enhanced software and database utilities. The first year was primarily dedicated to physically transferring the data from its original format to its initial CD archival format. The remainder of the first year was devoted to the verification of the restored data set and database. The second year was devoted to the enhancement of the data set, especially the development of IDL utilities and redesign of the database and search interface as needed. This period was also devoted to distribution of the rescued data set, principally the creation and maintenance of a web interface to the data set. The final six months was dedicated to working with NSSDC to create a permanent, off site, hive of the data set and supporting utilities. This time was also used to resolve last minute quality and design issues.

[A particular anthropometric method for the study of accessibility of a workstation].

PubMed

Molinaro, V; Del Ferraro, S

2008-01-01

One of the main factors which can involve musculo-skeletal disorders is the assumption of awkward postures. These lasts can be caused, in some cases, by a no-suitable collocation of some devices which are indispensable for the work. It is possible to evaluate if the chosen collocation is adequate or not by studying the accessibility of the workstation with a special regard for the accessibility of the devices placed inside the workstation. EN ISO 14738:2002 is a specific standard which has been adopted in Italy as UNI EN ISO 14738:2004. This standard gives some useful requirements, in terms of accessibility, to design a workstation at no-mobile machinery. In this study, the authors have analyzed a check out workstation by following the requirements described in UNI EN ISO 14738:2004. Critical aspects, related to the organization both of the work activities either of the workstation, have been highlighted taking into account standard criteria. Finally the authors make a new design of the check out workstation trying to optimize device collocation in order to reduce awkward postures. The new configuration has been investigated by applying the criteria mentioned in the standard.

ISO 9002 as Literacy Practice: Coping with Quality-Control Documents in a High-Tech Company

ERIC Educational Resources Information Center

Kleifgen, Jo Anne

2005-01-01

This study describes the process by which a circuit board manufacturing company became certified in an international quality control program known as ISO 9002. Particular attention is paid to how quality documents were made and used in actual practice and to the relationship between these standardized procedures (official literacies) and…

Developing product quality standards for wheelchairs used in less-resourced environments

PubMed Central

McCambridge, Matt; Reese, Norman; Schoendorfer, Don; Wunderlich, Eric; Rushman, Chris; Mahilo, Dave

2017-01-01

Background Premature failures of wheelchairs in less-resourced environments (LREs) may be because of shortcomings in product regulation and quality standards. The standards published by the International Organization for Standardization (ISO) specify wheelchair tests for durability, safety and performance, but their applicability to products used in the rugged conditions of LREs is unclear. Because of this, wheelchair-related guidelines published by the World Health Organization recommended developing more rigorous durability tests for wheelchairs. Objectives This study was performed to identify the additional tests needed for LREs. Methods First, a literature review of the development of ISO test standards, wheelchair standards testing studies and wheelchair evaluations in LREs was performed. Second, expert advice from members of the Standards Working Group of the International Society of Wheelchair Professionals (ISWP) was compiled and reviewed. Results A total of 35 articles were included in the literature review. Participation from LREs was not observed in the ISO standards development. As per wheelchair testing study evidence, wheelchair models delivered in LREs did not meet the minimum standards requirement. Multiple part failures and repairs were observed with reviewed field evaluation studies. ISWP experts noted that several testing factors responsible for premature failures with wheelchair parts are not included in the standards and accordingly provided advice for additional test development. Conclusion The study findings indicate the need to develop a wide range of tests, with specific tests for measuring corrosion resistance of the entire wheelchair, rolling resistance of castors and rear wheels, and durability of whole wheelchair and castor assemblies. PMID:28936410

Correction factors for the ISO rod phantom, a cylinder phantom, and the ICRU sphere for reference beta radiation fields of the BSS 2

NASA Astrophysics Data System (ADS)

Behrens, R.

2015-03-01

The International Organization for Standardization (ISO) requires in its standard ISO 6980 that beta reference radiation fields for radiation protection be calibrated in terms of absorbed dose to tissue at a depth of 0.07 mm in a slab phantom (30 cm x 30 cm x 15 cm). However, many beta dosemeters are ring dosemeters and are, therefore, irradiated on a rod phantom (1.9 cm in diameter and 30 cm long), or they are eye dosemeters possibly irradiated on a cylinder phantom (20 cm in diameter and 20 cm high), or area dosemeters irradiated free in air with the conventional quantity value (true value) being defined in a sphere (30 cm in diameter, made of ICRU tissue (International Commission on Radiation Units and Measurements)). Therefore, the correction factors for the conventional quantity value in the rod, the cylinder, and the sphere instead of the slab (all made of ICRU tissue) were calculated for the radiation fields of 147Pm, 85Kr, 90Sr/90Y, and, 106Ru/106Rh sources of the beta secondary standard BSS 2 developed at PTB. All correction factors were calculated for 0° up to 75° (in steps of 15°) radiation incidence. The results are ready for implementation in ISO 6980-3 and have recently been (partly) implemented in the software of the BSS 2.

FDA-sunlamp recommended Maximum Timer Interval And Exposure Schedule: consensus ISO/CIE dose equivalence.

PubMed

Dowdy, John C; Czako, Eugene A; Stepp, Michael E; Schlitt, Steven C; Bender, Gregory R; Khan, Lateef U; Shinneman, Kenneth D; Karos, Manuel G; Shepherd, James G; Sayre, Robert M

2011-09-01

The authors compared calculations of sunlamp maximum exposure times following current USFDA Guidance Policy on the Maximum Timer Interval and Exposure Schedule, with USFDA/CDRH proposals revising these to equivalent erythemal exposures of ISO/CIE Standard Erythema Dose (SED). In 2003, [USFDA/CDRH proposed replacing their unique CDRH/Lytle] erythema action spectrum with the ISO/CIE erythema action spectrum and revising the sunlamp maximum exposure timer to 600 J m(-2) ISO/CIE effective dose, presented as being biologically equivalent. Preliminary analysis failed to confirm said equivalence, indicating instead ∼38% increased exposure when applying these proposed revisions. To confirm and refine this finding, a collaboration of tanning bed and UV lamp manufacturers compiled 89 UV spectra representing a broad sampling of U.S. indoor tanning equipment. USFDA maximum recommended exposure time (Te) per current sunlamp guidance and CIE erythemal effectiveness per ISO/CIE standard were calculated. The CIE effective dose delivered per Te averaged 456 J(CIE) m(-2) (SD = 0.17) or ∼4.5 SED. The authors found that CDRH's proposed 600 J(CIE) m(-2) recommended maximum sunlamp exposure exceeds current Te erythemal dose by ∼33%. The current USFDA 0.75 MED initial exposure was ∼0.9 SED, consistent with 1.0 SED initial dose in existing international sunlamp standards. As no sunlamps analyzed exceeded 5 SED, a revised maximum exposure of 500 J(CIE) m(-2) (∼80% of CDRH's proposal) should be compatible with existing tanning equipment. A tanning acclimatization schedule is proposed beginning at 1 SED thrice-weekly, increasing uniformly stepwise over 4 wk to a 5 SED maximum exposure in conjunction with a tan maintenance schedule of twice-weekly 5 SED sessions, as biologically equivalent to current USFDA sunlamp policy.

Protective effects of the standardized extract of Zingiber officinale on myocardium against isoproterenol-induced biochemical and histopathological alterations in rats.

PubMed

Amran, Athirah Z; Jantan, Ibrahim; Dianita, Roza; Buang, Fhataheya

2015-01-01

Ginger [Zingiber officinale Roscoe. (Zingiberaceae)] has been universally used as a spice as well as for its health benefits. The present study evaluates the protective effect of the standardized extract of ginger against isoproterenol (ISO)-induced myocardial infarction (MI) in rats. Wistar rats were pretreated orally with three doses of standardized ginger extract (100, 200, and 400 mg/kg of body weight) or propranolol (5 mg/mL) for 28 d prior to ISO (85 mg/kg) induced MI in two doses on days 29 and 30. The rats were sacrificed 48 h after the first induction; serum and hearts were collected for biochemical and histopathological analysis. Gingerols and shogaols were identified and quantitatively analyzed in the extracts using validated reversed phase HPLC methods. Pretreatment with ginger extract at 400 mg/kg showed a significant decrease (p < 0.05) in all the cardiac enzyme activities, i.e., cardiac troponin I (cTnI) (0.57 ng/mL), creatine kinase MB isoenzyme (CK-MB) (10.34 pg/mL), lactate dehydrogenase (LDH) (115.22 U/L), alanine transaminase (ALT) (15.79 U/L), and aspartate transaminase (AST) (46.72 U/L) when compared with ISO-control rats. There were significant rises (p < 0.05) in the activity of glutathione peroxide (GPx) (53.16 U/L), catalase (CAT) (210.41 U/L), and superoxide dismutase (SOD) (280.89 U/mL) of the pretreated rats when compared with the ISO-control. Histopathological examination showed an improvement in membrane cell integrity in pretreated rats compared with untreated rats. The ethanol extract of ginger exhibited cardioprotective potential in treating myocardial injury following ISO administration.

Assessment of Safety Standards for Automotive Electronic Control Systems

DOT National Transportation Integrated Search

2016-06-01

This report summarizes the results of a study that assessed and compared six industry and government safety standards relevant to the safety and reliability of automotive electronic control systems. These standards include ISO 26262 (Road Vehicles - ...

The international development of forensic science standards - A review.

PubMed

Wilson-Wilde, Linzi

2018-04-16

Standards establish specifications and procedures designed to ensure products, services and systems are safe, reliable and consistently perform as intended. Standards can be used in the accreditation of forensic laboratories or facilities and in the certification of products and services. In recent years there have been various international activities aiming at developing forensic science standards and guidelines. The most significant initiative currently underway within the global forensic community is the development of International Organization for Standardization (ISO) standards. This paper reviews the main bodies working on standards for forensic science, the processes used and the implications for accreditation. This paper specifically discusses the work of ISO Technical Committee TC272, the future TC272 work program for the development of forensic science standards and associated timelines. Also discussed, are the lessons learnt to date in navigating the complex environment of multi-country stakeholder deliberations in standards development. Crown Copyright © 2018. Published by Elsevier B.V. All rights reserved.

A generative tool for building health applications driven by ISO 13606 archetypes.

PubMed

Menárguez-Tortosa, Marcos; Martínez-Costa, Catalina; Fernández-Breis, Jesualdo Tomás

2012-10-01

The use of Electronic Healthcare Records (EHR) standards in the development of healthcare applications is crucial for achieving the semantic interoperability of clinical information. Advanced EHR standards make use of the dual model architecture, which provides a solution for clinical interoperability based on the separation of the information and knowledge. However, the impact of such standards is biased by the limited availability of tools that facilitate their usage and practical implementation. In this paper, we present an approach for the automatic generation of clinical applications for the ISO 13606 EHR standard, which is based on the dual model architecture. This generator has been generically designed, so it can be easily adapted to other dual model standards and can generate applications for multiple technological platforms. Such good properties are based on the combination of standards for the representation of generic user interfaces and model-driven engineering techniques.

METADATA REGISTRY, ISO/IEC 11179

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pon, R K; Buttler, D J

2008-01-03

ISO/IEC-11179 is an international standard that documents the standardization and registration of metadata to make data understandable and shareable. This standardization and registration allows for easier locating, retrieving, and transmitting data from disparate databases. The standard defines the how metadata are conceptually modeled and how they are shared among parties, but does not define how data is physically represented as bits and bytes. The standard consists of six parts. Part 1 provides a high-level overview of the standard and defines the basic element of a metadata registry - a data element. Part 2 defines the procedures for registering classification schemesmore » and classifying administered items in a metadata registry (MDR). Part 3 specifies the structure of an MDR. Part 4 specifies requirements and recommendations for constructing definitions for data and metadata. Part 5 defines how administered items are named and identified. Part 6 defines how administered items are registered and assigned an identifier.« less

Minutes. Accredited Standards Committee on Bioacoustics, S3, U.S. Tag for ISO/TC43, Acoustics, IEC/TC 29 Electroacoustics, and ISO/TC108/SC4 Human Exposure to Mechanical Vibration and Shock Held in Baltimore, Maryland on 2 May 1991.

DTIC Science & Technology

1991-05-02

grouos : (i) $3/Advisory-Advisory Planning Committee to S3 - J.L. Fletcher, Chair (ii) $3/WG81 Assistive Listening Devices - R. Kasten, Chair -3- S3/327...international meetings. It was decided at previous ASACOS meeting (21 May 1990), that this standard should be developed under S3, with an S3 designation . Mr...ASACOS decided at its meeting held on 21 May 1990, to continue this standard under S3 jurisdiction, with its S3 designation , until such time as it is

An analysis of Indonesia’s information security index: a case study in a public university

NASA Astrophysics Data System (ADS)

Yustanti, W.; Qoiriah, A.; Bisma, R.; Prihanto, A.

2018-01-01

Ministry of Communication and Informatics of the Republic of Indonesia has issued the regulation number 4-2016 about Information Security Management System (ISMS) for all kind organizations. Public university as a government institution must apply this standard to assure its level of information security has complied ISO 27001:2013. This research is a preliminary study to evaluate the readiness of university IT services (case study in a public university) meets the requirement of ISO 27001:2013 using the Indonesia’s Information Security Index (IISI). There are six parameters used to measure the level of information security, these are the ICT role, governance, risk management, framework, asset management and technology. Each parameter consists of serial questions which must be answered and convert to a numeric value. The result shows the level of readiness and maturity to apply ISO 27001 standard.

New Tools to Document and Manage Data/Metadata: Example NGEE Arctic and ARM

NASA Astrophysics Data System (ADS)

Crow, M. C.; Devarakonda, R.; Killeffer, T.; Hook, L.; Boden, T.; Wullschleger, S.

2017-12-01

Tools used for documenting, archiving, cataloging, and searching data are critical pieces of informatics. This poster describes tools being used in several projects at Oak Ridge National Laboratory (ORNL), with a focus on the U.S. Department of Energy's Next Generation Ecosystem Experiment in the Arctic (NGEE Arctic) and Atmospheric Radiation Measurements (ARM) project, and their usage at different stages of the data lifecycle. The Online Metadata Editor (OME) is used for the documentation and archival stages while a Data Search tool supports indexing, cataloging, and searching. The NGEE Arctic OME Tool [1] provides a method by which researchers can upload their data and provide original metadata with each upload while adhering to standard metadata formats. The tool is built upon a Java SPRING framework to parse user input into, and from, XML output. Many aspects of the tool require use of a relational database including encrypted user-login, auto-fill functionality for predefined sites and plots, and file reference storage and sorting. The Data Search Tool conveniently displays each data record in a thumbnail containing the title, source, and date range, and features a quick view of the metadata associated with that record, as well as a direct link to the data. The search box incorporates autocomplete capabilities for search terms and sorted keyword filters are available on the side of the page, including a map for geo-searching. These tools are supported by the Mercury [2] consortium (funded by DOE, NASA, USGS, and ARM) and developed and managed at Oak Ridge National Laboratory. Mercury is a set of tools for collecting, searching, and retrieving metadata and data. Mercury collects metadata from contributing project servers, then indexes the metadata to make it searchable using Apache Solr, and provides access to retrieve it from the web page. Metadata standards that Mercury supports include: XML, Z39.50, FGDC, Dublin-Core, Darwin-Core, EML, and ISO-19115.

Guide to solar reference spectra and irradiance models

NASA Astrophysics Data System (ADS)

Tobiska, W. Kent

The international standard for determining solar irradiances was published by the International Standards Organization (ISO) in May 2007. The document, ISO 21348 Space Environment (natural and artificial) - Process for determining solar irradiances, describes the process for representing solar irradiances. We report on the next progression of standards work, i.e., the development of a guide that identifies solar reference spectra and irradiance models for use in engineering design or scientific research. This document will be produced as an AIAA Guideline and ISO Technical Report. It will describe the content of the reference spectra and models, uncertainties and limitations, technical basis, data bases from which the reference spectra and models are formed, publication references, and sources of computer code for reference spectra and solar irradiance models, including those which provide spectrally-resolved lines as well as solar indices and proxies and which are generally recognized in the solar sciences. The document is intended to assist aircraft and space vehicle designers and developers, heliophysicists, geophysicists, aeronomers, meteorologists, and climatologists in understanding available models, comparing sources of data, and interpreting engineering and scientific results based on different solar reference spectra and irradiance models.

From Distillation to Standardization: A French Perspective on the Shaping of Turpentine Spirit (1909-1976).

PubMed

Krasnodebski, Marcin

2016-11-01

Turpentine is a complex substance of pine resin origin, widely used as a solvent in multiple industries. Attempts to define it, even when elaborated by scientists, have been marked by a whole range of extra-scientific market considerations. While the Pine Institute, a resin chemistry research centre in Bordeaux, succeeded in stabilizing the meaning of the word "turpentine" on the national level in France, its expertise was contested abroad. When the International Organization for Standardization (ISO) Committee 35 tried to establish a new international standard for turpentine, France was accused of protecting its industry by twisting scientific definitions for its own needs. The ISO members clashed over the relationship between trade standards and scientific definitions, at the same time highlighting the epistemological difficulties in constructing both categories.

TOPICAL REVIEW: Trend report on international and Japanese standardization activities for bioceramics and tissue engineered medical products

NASA Astrophysics Data System (ADS)

Tsutsumi, Sadami

2010-02-01

Since porous and injectable bioceramics have recently been utilized often as scaffolds for bone regenerative medicine, the need for their standardization has increased. One of the standard proposals in ISO/TC150 and JIS has been a draft for characterization of the porous bioceramic scaffolds in both micro- and macro-scopic aspects. ISO/TC150/SC7 (Tissue engineered medical products) has been co-chaired by Professor J E Lemons, Department of Surgery, University of Alabama at Birmingham and Dr R Nakaoka, Division of Medical Devices, National Institute of Health Sciences, Japan. The scope of SC7 has been specified as 'Standardization for the general requirements and performance of tissue engineered medical products with the exclusion of gene therapy, transplantation and transfusion'.

apART: system for the acquisition, processing, archiving, and retrieval of digital images in an open, distributed imaging environment

NASA Astrophysics Data System (ADS)

Schneider, Uwe; Strack, Ruediger

1992-04-01

apART reflects the structure of an open, distributed environment. According to the general trend in the area of imaging, network-capable, general purpose workstations with capabilities of open system image communication and image input are used. Several heterogeneous components like CCD cameras, slide scanners, and image archives can be accessed. The system is driven by an object-oriented user interface where devices (image sources and destinations), operators (derived from a commercial image processing library), and images (of different data types) are managed and presented uniformly to the user. Browsing mechanisms are used to traverse devices, operators, and images. An audit trail mechanism is offered to record interactive operations on low-resolution image derivatives. These operations are processed off-line on the original image. Thus, the processing of extremely high-resolution raster images is possible, and the performance of resolution dependent operations is enhanced significantly during interaction. An object-oriented database system (APRIL), which can be browsed, is integrated into the system. Attribute retrieval is supported by the user interface. Other essential features of the system include: implementation on top of the X Window System (X11R4) and the OSF/Motif widget set; a SUN4 general purpose workstation, inclusive ethernet, magneto optical disc, etc., as the hardware platform for the user interface; complete graphical-interactive parametrization of all operators; support of different image interchange formats (GIF, TIFF, IIF, etc.); consideration of current IPI standard activities within ISO/IEC for further refinement and extensions.

Why SGML? Why Now?

ERIC Educational Resources Information Center

Marcoux, Yves; Sevigny, Martin

1997-01-01

Defines Standard Generalized Markup Language (SGML), a format for electronic documents that provides documentary information for efficient accessibility, dissemination, and preservation. Compares SGML to Open Document Architecture (ODA) based on standards by the International Organization for Standardization (ISO), and describes the principles and…

The new standard of fluids for hemodialysis in Japan.

PubMed

Kawanishi, Hideki; Masakane, Ikuto; Tomo, Tadashi

2009-01-01

The standard of fluids for hemodialysis is being evaluated by the International Organization for Standardization (ISO), and will be decided within a few years. In 2008, the Japanese Society for Dialysis Therapy (JSDT) proposed the standard of fluids for hemodialysis by taking the draft ISO standard into consideration and the circumstances in Japan. It was characteristically a standard for Japan, where the central dialysis fluid delivery system (CDDS) is routinely used. In addition, the therapeutic application of each dialysis fluid is clarified. Since high-performance dialyzers are frequently employed in Japan, the standard recommends that ultrapure dialysis fluid be used for all dialysis modalities at all dialysis facilities. It also recommends that the dialysis equipment safety management committee at each facility validate the microbiological qualities of online-prepared substitution fluid, making the responsibility of the dialysis facility clear. This standard is more rigid than those of other countries, and is expected to contribute to improvements in the survival outcome of dialysis patients. (c) 2009 S. Karger AG, Basel.

The Impact of ISO Quality Management Systems on Primary and Secondary Schools in Spain

ERIC Educational Resources Information Center

Arribas Díaz, Jorge Antonio; Martínez-Mediano, Catalina

2018-01-01

Purpose: The purpose of this study is to evaluate the application of quality management systems (QMS) based on international standards of quality in education (ISO 9001:2008) and ascertain the influence of this quality model on primary and secondary schools in Spain. Design/methodology/approach: The study was conducted in 26 publicly funded,…

Commitment to Quality Education Services through ISO 9000: A Case Study of Romania

ERIC Educational Resources Information Center

Paunescu, Carmen; Fok, Wing

2005-01-01

The paper discusses a model of quality management system for higher education. One of the main objectives of this paper is to highlight the challenges facing the school during implementation of the ISO 9001 standard and the benefits of successfully implementing such a quality system can bring to higher education. Based on the experience of a…

Data Processing and Measuring System for Studying the Cooling Capacity of Quenchants

NASA Astrophysics Data System (ADS)

Tsaplin, S. V.; Bolychev, S. A.; Shemanaev, D. V.; Mishagin, B. S.

2014-09-01

A domestically produced device for determining the cooling capacity of quenchants is developed on the basis of the ISO 9001, ISO 9950, ASTM D6200-01, and ASTM D6482-01 standards. Acomparison of the results of a determination of the parameters of cooling environments obtained by means of the present device and a foreign counterpart is carried out.

Orifice Mass Flow Calculation in NASA's W-8 Single Stage Axial Compressor Facility

NASA Technical Reports Server (NTRS)

Bozak, Richard F.

2018-01-01

Updates to the orifice mass flow calculation for the W-8 Single Stage Axial Compressor Facility at NASA Glenn Research Center are provided to include the effect of humidity and incorporate ISO 5167. A methodology for including the effect of humidity into the inlet orifice mass flow calculation is provided. Orifice mass flow calculations provided by ASME PTC-19.5-2004, ASME MFC-3M-2004, ASME Fluid Meters, and ISO 5167 are compared for W-8's atmospheric inlet orifice plate. Differences in expansion factor and discharge coefficient given by these standards give a variation of about +/- 75% mass flow except for a few cases. A comparison of the calculations with an inlet static pressure mass flow correlation and a fan exit mass flow integration using test data from a 2017 turbofan rotor test in W-8 show good agreement between the inlet static pressure mass flow correlation, ISO 5167, and ASME Fluid Meters. While W-8's atmospheric inlet orifice plate violates the pipe diameter limit defined by each of the standards, the ISO 5167 is chosen to be the primary orifice mass flow calculation to use in the W-8 facility.

16 CFR § 1203.3 - Referenced documents.

Code of Federal Regulations, 2013 CFR

2013-01-01

... OCT88, Instrumentation for Impact Tests, are available from Society of Automotive Engineers, 400... follows. Copies of the draft ISO/DIS Standard 6220-1983 are available from American National Standards...

Future Direction of IMIA Standardization

PubMed Central

Kimura, M.; Ogishima, S.; Shabo, A.; Kim, I. K.; Parisot, C.; de Faria Leao, B.

2014-01-01

Summary Objectives Standardization in the field of health informatics has increased its importance and global alliance for establishing interoperability and compatibility internationally. Standardization has been organized by standard development organizations (SDOs) such as ISO (International Organization for Standardization), CEN (European Committee for Standardization), IHE (Integrating the Healthcare Enterprise), and HL7 (Health Level 7), etc. This paper reports the status of these SDOs’ activities. Methods In this workshop, we reviewed the past activities and the current situation of standardization in health care informatics with the standard development organizations such as ISO, CEN, IHE, and HL7. Then we discussed the future direction of standardization in health informatics toward “future medicine” based on standardized technologies. Results We could share the status of each SDO through exchange of opinions in the workshop. Some WHO members joined our discussion to support this constructive activity. Conclusion At this meeting, the workshop speakers have been appointed as new members of the IMIA working groups of Standards in Health Care Informatics (WG16). We could reach to the conclusion that we collaborate for the international standardization in health informatics toward “future medicine”. PMID:25123729

Metadata registry and management system based on ISO 11179 for cancer clinical trials information system

PubMed Central

Park, Yu Rang; Kim*, Ju Han

2006-01-01

Standardized management of data elements (DEs) for Case Report Form (CRF) is crucial in Clinical Trials Information System (CTIS). Traditional CTISs utilize organization-specific definitions and storage methods for Des and CRFs. We developed metadata-based DE management system for clinical trials, Clinical and Histopathological Metadata Registry (CHMR), using international standard for metadata registry (ISO 11179) for the management of cancer clinical trials information. CHMR was evaluated in cancer clinical trials with 1625 DEs extracted from the College of American Pathologists Cancer Protocols for 20 major cancers. PMID:17238675

RBS as a new primary direct reference method for measuring quantity of material

NASA Astrophysics Data System (ADS)

Jeynes, C.

2017-09-01

The quantity of material in thin films can be measured reliably, non-destructively, and at an absolute traceable accuracy with a combined standard uncertainty of 1% by Rutherford backscattering spectrometry (RBS). We have demonstrated a measurement protocol for the determination of quantity of material by RBS that has been accredited at this accuracy to the ISO 17025 standard by the United Kingdom Accreditation Service (UKAS). The method is entirely traceable to SI units relying on no artefacts, and thus qualifies as a primary direct reference method as defined by the ISO Guide 35:1985 (paragraph 9.4.1).

Recommendations for a service framework to access astronomical archives

NASA Technical Reports Server (NTRS)

Travisano, J. J.; Pollizzi, J.

1992-01-01

There are a large number of astronomical archives and catalogs on-line for network access, with many different user interfaces and features. Some systems are moving towards distributed access, supplying users with client software for their home sites which connects to servers at the archive site. Many of the issues involved in defining a standard framework of services that archive/catalog suppliers can use to achieve a basic level of interoperability are described. Such a framework would simplify the development of client and server programs to access the wide variety of astronomical archive systems. The primary services that are supplied by current systems include: catalog browsing, dataset retrieval, name resolution, and data analysis. The following issues (and probably more) need to be considered in establishing a standard set of client/server interfaces and protocols: Archive Access - dataset retrieval, delivery, file formats, data browsing, analysis, etc.; Catalog Access - database management systems, query languages, data formats, synchronous/asynchronous mode of operation, etc.; Interoperability - transaction/message protocols, distributed processing mechanisms (DCE, ONC/SunRPC, etc), networking protocols, etc.; Security - user registration, authorization/authentication mechanisms, etc.; Service Directory - service registration, lookup, port/task mapping, parameters, etc.; Software - public vs proprietary, client/server software, standard interfaces to client/server functions, software distribution, operating system portability, data portability, etc. Several archive/catalog groups, notably the Astrophysics Data System (ADS), are already working in many of these areas. In the process of developing StarView, which is the user interface to the Space Telescope Data Archive and Distribution Service (ST-DADS), these issues and the work of others were analyzed. A framework of standard interfaces for accessing services on any archive system which would benefit archive user and supplier alike is proposed.

Image dissemination and archiving.

PubMed

Robertson, Ian

2007-08-01

Images generated as part of the sonographic examination are an integral part of the medical record and must be retained according to local regulations. The standard medical image format, known as DICOM (Digital Imaging and COmmunications in Medicine) makes it possible for images from many different imaging modalities, including ultrasound, to be distributed via a standard internet network to distant viewing workstations and a central archive in an almost seamless fashion. The DICOM standard is a truly universal standard for the dissemination of medical images. When purchasing an ultrasound unit, the consumer should research the unit's capacity to generate images in a DICOM format, especially if one wishes interconnectivity with viewing workstations and an image archive that stores other medical images. PACS, an acronym for Picture Archive and Communication System refers to the infrastructure that links modalities, workstations, the image archive, and the medical record information system into an integrated system, allowing for efficient electronic distribution and storage of medical images and access to medical record data.

ISO 15189 accreditation: Requirements for quality and competence of medical laboratories, experience of a laboratory I.

PubMed

Guzel, Omer; Guner, Ebru Ilhan

2009-03-01

Medical laboratories are the key partners in patient safety. Laboratory results influence 70% of medical diagnoses. Quality of laboratory service is the major factor which directly affects the quality of health care. The clinical laboratory as a whole has to provide the best patient care promoting excellence. International Standard ISO 15189, based upon ISO 17025 and ISO 9001 standards, provides requirements for competence and quality of medical laboratories. Accredited medical laboratories enhance credibility and competency of their testing services. Our group of laboratories, one of the leading institutions in the area, had previous experience with ISO 9001 and ISO 17025 Accreditation at non-medical sections. We started to prepared for ISO 15189 Accreditation at the beginning of 2006 and were certified in March, 2007. We spent more than a year to prepare for accreditation. Accreditation scopes of our laboratory were as follows: clinical chemistry, hematology, immunology, allergology, microbiology, parasitology, molecular biology of infection serology and transfusion medicine. The total number of accredited tests is 531. We participate in five different PT programs. Inter Laboratory Comparison (ILC) protocols are performed with reputable laboratories. 82 different PT Program modules, 277 cycles per year for 451 tests and 72 ILC program organizations for remaining tests have been performed. Our laboratory also organizes a PT program for flow cytometry. 22 laboratories participate in this program, 2 cycles per year. Our laboratory has had its own custom made WEB based LIS system since 2001. We serve more than 500 customers on a real time basis. Our quality management system is also documented and processed electronically, Document Management System (DMS), via our intranet. Preparatory phase for accreditation, data management, external quality control programs, personnel related issues before, during and after accreditation process are presented. Every laboratory has to concentrate on patient safety issues related to laboratory testing and should perform quality improvement projects.

ZAP-70 expression in B-cell chronic lymphocytic leukemia: evaluation by external (isotypic) or internal (T/NK cells) controls and correlation with IgV(H) mutations.

PubMed

Zucchetto, Antonella; Bomben, Riccardo; Bo, Michele Dal; Nanni, Paola; Bulian, Pietro; Rossi, Francesca Maria; Del Principe, Maria Ilaria; Santini, Simone; Del Poeta, Giovanni; Degan, Massimo; Gattei, Valter

2006-07-15

Expression of T cell specific zeta-associated protein 70 (ZAP-70) by B-cell chronic lymphocytic leukemia (B-CLL) cells, as investigated by flow cytometry, has both prognostic relevance and predictive power as surrogate for immunoglobulin heavy chain variable region (IgV(H)) mutations, although a standardization of the cytometric protocol is still lacking. Flow cytometric analyses for ZAP-70 were performed in peripheral blood samples from 145 B-CLL (124 with IgV(H) mutations) by a standard three-color protocol. Identification of ZAP-70(+) cell population was based on an external negative control, i.e., the isotypic control (ISO method) or an internal positive control, i.e., the population of residual normal T/NK cells (TNK method). A comparison between these two approaches was performed. While 86/145 cases were concordant as for ZAP-70 expression according to the two methods (ISO(+)TNK(+) or ISO(-)TNK(-)), 59/145 cases had discordant ZAP-70 expression, mainly (56/59) showing a ISO(+)TNK(-) profile. These latter cases express higher levels of ZAP-70 in their normal T cell component. Moreover, discordant ISO(+)TNK(-) cases had a IgV(H) gene mutation profile similar to that of concordantly positive cases and different from ZAP-70 concordantly negative B-CLL. Analysis of ZAP-70 expression by B-CLL cells by using the ISO method allows to overcome the variability in the expression of ZAP-70 by residual T cells and yields a better correlation with IgV(H) gene mutations. A receiver operating characteristic analysis suggests to employ a higher cut-off than the commonly used 20%. A parallel evaluation of the prognostic value of ZAP-70 expression, as determined according to the ISO and TNK methods, is still needed. (c) 2006 International Society for Analytical Cytology.

Effects of Cooking End-point Temperature and Muscle Part on Sensory 'Hardness' and 'Chewiness' Assessed Using Scales Presented in ISO11036:1994.

PubMed

Sasaki, Keisuke; Motoyama, Michiyo; Narita, Takumi; Chikuni, Koichi

2013-10-01

Texture and 'tenderness' in particular, is an important sensory characteristic for consumers' satisfaction of beef. Objective and detailed sensory measurements of beef texture have been needed for the evaluation and management of beef quality. This study aimed to apply the sensory scales defined in ISO11036:1994 to evaluate the texture of beef. Longissimus and Semitendinosus muscles of three Holstein steers cooked to end-point temperatures of 60°C and 72°C were subjected to sensory analyses by a sensory panel with expertise regarding the ISO11036 scales. For the sensory analysis, standard scales of 'chewiness' (9-points) and 'hardness' (7-points) were presented to the sensory panel with reference materials defined in ISO11036. As a result, both 'chewiness' and 'hardness' assessed according to the ISO11036 scales increased by increasing the cooking end-point temperature, and were different between Longissimus and Semitendinosus muscles. The sensory results were in good agreement with instrumental texture measurements. However, both texture ratings in this study were in a narrower range than the full ISO scales. For beef texture, ISO11036 scales for 'chewiness' and 'hardness' are useful for basic studies, but some alterations are needed for practical evaluation of muscle foods.

Making Interoperability Easier with the NASA Metadata Management Tool

NASA Astrophysics Data System (ADS)

Shum, D.; Reese, M.; Pilone, D.; Mitchell, A. E.

2016-12-01

ISO 19115 has enabled interoperability amongst tools, yet many users find it hard to build ISO metadata for their collections because it can be large and overly flexible for their needs. The Metadata Management Tool (MMT), part of NASA's Earth Observing System Data and Information System (EOSDIS), offers users a modern, easy to use browser based tool to develop ISO compliant metadata. Through a simplified UI experience, metadata curators can create and edit collections without any understanding of the complex ISO-19115 format, while still generating compliant metadata. The MMT is also able to assess the completeness of collection level metadata by evaluating it against a variety of metadata standards. The tool provides users with clear guidance as to how to change their metadata in order to improve their quality and compliance. It is based on NASA's Unified Metadata Model for Collections (UMM-C) which is a simpler metadata model which can be cleanly mapped to ISO 19115. This allows metadata authors and curators to meet ISO compliance requirements faster and more accurately. The MMT and UMM-C have been developed in an agile fashion, with recurring end user tests and reviews to continually refine the tool, the model and the ISO mappings. This process is allowing for continual improvement and evolution to meet the community's needs.

ISO/GUM UNCERTAINTIES AND CIAAW (UNCERTAINTY TREATMENT FOR RECOMMENDED ATOMIC WEIGHTS AND ISOTOPIC ABUNDANCES)

DOE Office of Scientific and Technical Information (OSTI.GOV)

HOLDEN,N.E.

2007-07-23

The International Organization for Standardization (ISO) has published a Guide to the expression of Uncertainty in Measurement (GUM). The IUPAC Commission on Isotopic Abundance and Atomic Weight (CIAAW) began attaching uncertainty limits to their recommended values about forty years ago. CIAAW's method for determining and assigning uncertainties has evolved over time. We trace this evolution to their present method and their effort to incorporate the basic ISO/GUM procedures into evaluations of these uncertainties. We discuss some dilemma the CIAAW faces in their present method and whether it is consistent with the application of the ISO/GUM rules. We discuss the attemptmore » to incorporate variations in measured isotope ratios, due to natural fractionation, into the ISO/GUM system. We make some observations about the inconsistent treatment in the incorporation of natural variations into recommended data and uncertainties. A recommendation for expressing atomic weight values using a tabulated range of values for various chemical elements is discussed.« less

How ISO/IEC 17799 can be used for base lining information assurance among entities using data mining for defense, homeland security, commercial, and other civilian/commercial domains

NASA Astrophysics Data System (ADS)

Perry, William G.

2006-04-01

One goal of database mining is to draw unique and valid perspectives from multiple data sources. Insights that are fashioned from closely-held data stores are likely to possess a high degree of reliability. The degree of information assurance comes into question, however, when external databases are accessed, combined and analyzed to form new perspectives. ISO/IEC 17799, Information technology-Security techniques-Code of practice for information security management, can be used to establish a higher level of information assurance among disparate entities using data mining in the defense, homeland security, commercial and other civilian/commercial domains. Organizations that meet ISO/IEC information security standards have identified and assessed risks, threats and vulnerabilities and have taken significant proactive steps to meet their unique security requirements. The ISO standards address twelve domains: risk assessment and treatment, security policy, organization of information security, asset management, human resources security, physical and environmental security, communications and operations management, access control, information systems acquisition, development and maintenance, information security incident management and business continuity management and compliance. Analysts can be relatively confident that if organizations are ISO 17799 compliant, a high degree of information assurance is likely to be a characteristic of the data sets being used. The reverse may be true. Extracting, fusing and drawing conclusions based upon databases with a low degree of information assurance may be wrought with all of the hazards that come from knowingly using bad data to make decisions. Using ISO/IEC 17799 as a baseline for information assurance can help mitigate these risks.

Proposed Reference Spectral Irradiance Standards to Improve Photovoltaic Concentrating System Design and Performance Evaluation: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Myers, D. R.; Emery, K. E.; Gueymard, C.

2002-05-01

This conference paper describes the American Society for Testing and Materials (ASTM), the International Electrotechnical Commission (IEC), and the International Standards Organization (ISO) standard solar terrestrial spectra (ASTM G-159, IEC-904-3, ISO 9845-1) provide standard spectra for photovoltaic performance applications. Modern terrestrial spectral radiation models and knowledge of atmospheric physics are applied to develop suggested revisions to update the reference spectra. We use a moderately complex radiative transfer model (SMARTS2) to produce the revised spectra. SMARTS2 has been validated against the complex MODTRAN radiative transfer code and spectral measurements. The model is proposed as an adjunct standard to reproduce the referencemore » spectra. The proposed spectra represent typical clear sky spectral conditions associated with sites representing reasonable photovoltaic energy production and weathering and durability climates. The proposed spectra are under consideration by ASTM.« less

Standardization of noncontact 3D measurement

NASA Astrophysics Data System (ADS)

Takatsuji, Toshiyuki; Osawa, Sonko; Sato, Osamu

2008-08-01

As the global R&D competition is intensified, more speedy measurement instruments are required both in laboratories and production process. In machinery areas, while contact type coordinate measuring machines (CMM) have been widely used, noncontact type CMMs are growing its market share which are capable of measuring enormous number of points at once. Nevertheless, since no industrial standard concerning an accuracy test of noncontact CMMs exists, each manufacturer writes the accuracy of their product according to their own rules, and this situation gives confusion to customers. The working group ISO/TC 213/WG 10 is trying to make a new ISO standard which stipulates an accuracy test of noncontact CMMs. The concept and the situation of discussion of this new standard will be explained. In National Metrology Institute of Japan (NMIJ), we are collecting measurement data which serves as a technical background of the standards together with a consortium formed by users and manufactures. This activity will also be presented.

ISO 50001 and SEP Faster and Cheaper - Exploring the Enterprise-Wide Approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Jingjing; Rao, Prakash; Therkelsen, Peter

ISO 50001 and other management systems (e.g., ISO 9001 and ISO 14001) allow for implementation and certification at the enterprise level. The "Central Office" concept, which allows a small group of employees to manage and facilitate the organization’s energy management system (EnMS) at the enterprise level, was introduced within the ISO 50003 standard to provide guidance to ISO 50001 certification bodies. Four industrial companies have partnered with the United States Department of Energy to pilot the enterprise-wide ISO 50001/SEP concept under the Better Buildings Superior Energy Performance (SEP) Enterprise-wide Accelerator. Each organization developed a Central Office to host their EnMSmore » while implementing ISO 50001/SEP at multiple physically separated sites. The four corporate partners tailored their Central Office implementation model to meet their own specific circumstances and needs. This paper reviews the commonalities, differences, and benefits of each of these enterprise-wide implementation models, including organizational structures, Central Office staff responsibilities, and key strategies. The cost savings and benefits of using the enterprise-wide approach were assessed, including the cost per site compared with that of a conventional, single-site ISO 50001/SEP implementation approach. This paper also discusses the drivers for the cost reductions realized through these enterprise-wide approaches. The four partner companies worked with 30 total sites. On average, these 30 sites improved energy performance by 5% annually over their SEP achievement periods, saved more than $600,000 annually in energy costs and reduced implementation cost for ISO 50001 and SEP by $19,000 and 0.8 Full Time Equivalent × years (FTE-yr) of staff time per site. The results can inform other organizations seeking to implement enterprise-wide ISO 50001/SEP, as well as energy efficiency organizations seeking to promote wider adoption of ISO 50001 implementation.« less

Another HISA--the new standard: health informatics--service architecture.

PubMed

Klein, Gunnar O; Sottile, Pier Angelo; Endsleff, Frederik

2007-01-01

In addition to the meaning as Health Informatics Society of Australia, HISA is the acronym used for the new European Standard: Health Informatics - Service Architecture. This EN 12967 standard has been developed by CEN - the federation of 29 national standards bodies in Europe. This standard defines the essential elements of a Service Oriented Architecture and a methodology for localization particularly useful for large healthcare organizations. It is based on the Open Distributed Processing (ODP) framework from ISO 10746 and contains the following parts: Part 1: Enterprise viewpoint. Part 2: Information viewpoint. Part 3: Computational viewpoint. This standard is now also the starting point for the consideration for an International standard in ISO/TC 215. The basic principles with a set of health specific middleware services as a common platform for various applications for regional health information systems, or large integrated hospital information systems, are well established following a previous prestandard. Examples of large scale deployments in Sweden, Denmark and Italy are described.

Interpreting international governance standards for health IT use within general medical practice.

PubMed

Mahncke, Rachel J; Williams, Patricia A H

2014-01-01

General practices in Australia recognise the importance of comprehensive protective security measures. Some elements of information security governance are incorporated into recommended standards, however the governance component of information security is still insufficiently addressed in practice. The International Organistion for Standardisation (ISO) released a new global standard in May 2013 entitled, ISO/IEC 27014:2013 Information technology - Security techniques - Governance of information security. This standard, applicable to organisations of all sizes, offers a framework against which to assess and implement the governance components of information security. The standard demonstrates the relationship between governance and the management of information security, provides strategic principles and processes, and forms the basis for establishing a positive information security culture. An analysis interpretation of this standard for use in Australian general practice was performed. This work is unique as such interpretation for the Australian healthcare environment has not been undertaken before. It demonstrates an application of the standard at a strategic level to inform existing development of an information security governance framework.

Evaluation of seatback vibration based on ISO 2631-1 (1997) standard method: The influence of vehicle seat structural resonance.

PubMed

Ittianuwat, R; Fard, M; Kato, K

2017-01-01

Although much research has been done in developing the current ISO 2631-1 (1997) standard method for assessment seat vibration comfort, little consideration has been given to the influence of vehicle seat structural dynamics on comfort assessment. Previous research has shown that there are inconsistencies between standard methods and subjective evaluation of comfort at around vehicle seat twisting resonant frequencies. This study reports the frequency-weighted r.m.s. accelerations in [Formula: see text], [Formula: see text] and [Formula: see text] axes and the total vibration (point vibration total value) at five locations on seatback surface at around vehicle seat twisting resonant frequencies. The results show that the vibration measured at the centre of seatback surface, suggested by current ISO 2631-1 (1997), at around twisting resonant frequencies was the least for all tested vehicle seats. The greatest point vibration total value on the seatback surface varies among vehicle seats. The variations in vibration measured at different locations on seatback surface at around twisting resonant frequencies were sufficiently great that might affect the comfort assessment of vehicle seat.Practitioner Summary: The influence of vehicle seat structural dynamics has not been considered in current ISO 2631-1 (1997). The results of this study show that the vibration measures on seatback surface at around vehicle seat twisting resonant frequency depends on vehicle seats and dominate at the top or the bottom of seatback but not at the centre.

On the seamless, harmonized use of ISO/IEEE11073 and openEHR.

PubMed

Trigo, Jesús D; Kohl, Christian D; Eguzkiza, Aitor; Martínez-Espronceda, Miguel; Alesanco, Álvaro; Serrano, Luis; García, José; Knaup, Petra

2014-05-01

Standardized exchange of clinical information is a key factor in the provision of high quality health care systems. In this context, the openEHR specification facilitates the management of health data in electronic health records (EHRs), while the ISO/IEEE11073 (also referred to as X73PHD) family of standards provides a reference framework for medical device interoperability. Hospitals and health care providers using openEHR require flawless integration of data coming from external sources, such as X73PHD. Hence, a harmonization process is crucial for achieving a seamless, coherent use of those specifications in real scenarios. Such harmonization is the aim of this paper. Thus, the classes and attributes of a representative number of X73PHD specializations for medical devices--weight, temperature, blood pressure, pulse and heart rate, oximetry, and electrocardiograph--along with the X73PHD core document--ISO/IEEE11073-20601--have been analyzed and mapped to openEHR archetypes. The proposed methodology reuses the existing archetypes when possible and suggests new ones--or appropriate modifications--otherwise. As a result, this paper analyzes the inconsistencies found and the implications thereof in the coordinated use of these two standards. The procedure has also shown how existing standards are able to influence the archetype development process, enhancing the existing archetype corpus.

Air Force Space Command. Space and Missile Systems Center Standard. Configuration Management

DTIC Science & Technology

2008-06-13

Aerospace Corporation report number TOR-2006( 8583 )-1. 3. Beneficial comments (recommendations, additions, deletions) and any pertinent data that...Engineering Drawing Practices IEEE STD 610.12 Glossary of Software Engineering Terminology, September 28,1990 ISO /IEC 12207 Software Life...item, regardless of media, formally designated and fixed at a specific time during the configuration item’s life cycle. (Source: ISO /IEC 12207

NASA Glenn's Acoustical Testing Laboratory Awarded Accreditation by the National Voluntary Laboratory Accreditation Program

NASA Technical Reports Server (NTRS)

Akers, James C.; Cooper, Beth A.

2004-01-01

NASA Glenn Research Center's Acoustical Testing Laboratory (ATL) provides a comprehensive array of acoustical testing services, including sound pressure level, sound intensity level, and sound-power-level testing per International Standards Organization (ISO)1 3744. Since its establishment in September 2000, the ATL has provided acoustic emission testing and noise control services for a variety of customers, particularly microgravity space flight hardware that must meet International Space Station acoustic emission requirements. The ATL consists of a 23- by 27- by 20-ft (height) convertible hemi/anechoic test chamber and a separate sound-attenuating test support enclosure. The ATL employs a personal-computer-based data acquisition system that provides up to 26 channels of simultaneous data acquisition with real-time analysis (ref. 4). Specialized diagnostic tools, including a scanning sound-intensity system, allow the ATL's technical staff to support its clients' aggressive low-noise design efforts to meet the space station's acoustic emission requirement. From its inception, the ATL has pursued the goal of developing a comprehensive ISO 17025-compliant quality program that would incorporate Glenn's existing ISO 9000 quality system policies as well as ATL-specific technical policies and procedures. In March 2003, the ATL quality program was awarded accreditation by the National Voluntary Laboratory Accreditation Program (NVLAP) for sound-power-level testing in accordance with ISO 3744. The NVLAP program is administered by the National Institutes of Standards and Technology (NIST) of the U.S. Department of Commerce and provides third-party accreditation for testing and calibration laboratories. There are currently 24 NVLAP-accredited acoustical testing laboratories in the United States. NVLAP accreditation covering one or more specific testing procedures conducted in accordance with established test standards is awarded upon successful completion of an intensive onsite assessment that includes proficiency testing and documentation review. The ATL NVLAP accreditation currently applies specifically to its ISO 3744 soundpower- level determination procedure (see the photograph) and supporting ISO 17025 quality system, although all ATL operations are conducted in accordance with its quality system. The ATL staff is currently developing additional procedures to adapt this quality system to the testing of space flight hardware in accordance with International Space Station acoustic emission requirements.<

Results of the performance verification of the CoaguChek XS system.

PubMed

Plesch, W; Wolf, T; Breitenbeck, N; Dikkeschei, L D; Cervero, A; Perez, P L; van den Besselaar, A M H P

2008-01-01

This is the first paper reporting a performance verification study of a point-of-care (POC) monitor for prothrombin time (PT) testing according to the requirements given in chapter 8 of the International Organization for Standardization (ISO) 17593:2007 standard "Clinical laboratory testing and in vitro medical devices - Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy". The monitor under investigation was the new CoaguChek XS system which is designed for use in patient self testing. Its detection principle is based on the amperometric measurement of the thrombin activity generated by starting the coagulation cascade using a recombinant human thromboplastin. The system performance verification study was performed at four study centers using venous and capillary blood samples on two test strip lots. Laboratory testing was performed from corresponding frozen plasma samples with six commercial thromboplastins. Samples from 73 normal donors and 297 patients on oral anticoagulation therapy were collected. Results were assessed using a refined data set of 260 subjects according to the ISO 17593:2007 standard. Each of the two test strip lots met the acceptance criteria of ISO 17593:2007 versus all thromboplastins (bias -0.19 to 0.18 INR; >97% of data within accuracy limits). The coefficient of variation for imprecision of the PT determinations in INR ranged from 2.0% to 3.2% in venous, and from 2.9% to 4.0% in capillary blood testing. Capillary versus venous INR data showed agreement of results with regression lines equal to the line of identity. The new system demonstrated a high level of trueness and accuracy, and low imprecision in INR testing. It can be concluded that the CoaguChek XS system complies with the requirements in chapter 8 of the ISO standard 17593:2007.

Standards for the calibration of extensometers

NASA Astrophysics Data System (ADS)

Loveday, Malcolm S.

1991-10-01

The consequences of the impending publication of a new European Standard, BS EN 10002 Pt 4 'Metallic Materials: Verification of Extensometers Used in Uniaxial Testing', which was based on the equivalent International Standard ISO 9513, are considered within the context of the new standard superceding the present British Standard, BS 3846. The three standards are compared and the differences are highlighted.

International Micrographics Standards: Report of the 1979 Paris Meeting of ISO/TC171.

ERIC Educational Resources Information Center

Heynen, Jeffrey

1980-01-01

Describes a meeting of the technical committee on micrographics of the International Organization for Standardization, and fcuses on the committee's work relating to the reproduction of library materials within the general context of international standards-making activities. (FM)

Use of disinfectants in open-air dairying.

PubMed

Hutchinson, R E

1995-06-01

Disinfection systems are essential in providing dairy foods which are safe for consumption by all sectors and age groups of the human population. The New Zealand dairy industry ensures quality competition under International Organisation for Standardisation (ISO) general systems standards (ISO 9002 and ISO Guide 25) and is subject to food safety assurance legislation (Dairy Industry Regulations 1990). This latter regulation requires that safe foods be produced in accordance with Product Safety Programmes approved by the Ministry of Agriculture and Fisheries. Safety can be demonstrated by compliance with the Codes of Practice of the industry. Farm dairy detergents and sanitisers must be approved for use. These disinfection systems are described.

Travel Survey Manual

DOT National Transportation Integrated Search

2012-11-01

Harmonization Task Groups 1 and 3 (HTG1 and 3) were established by the EU-US International Standards Harmonization Working Group to attempt to harmonize standards (including ISO, CEN, ETSI, IEEE) on security (HTG1) and communications protocols (HTG3)...

Comparison of different measurement methods for transmittance haze

NASA Astrophysics Data System (ADS)

Yu, Hsueh-Ling; Hsaio, Chin-Chai

2009-08-01

Transmittance haze is increasingly important to the LCD and solar cell industry. Most commercial haze measurement instruments are designed according to the method recommended in the documentary standards like ASTM D 1003 (ASTM 2003 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics), JIS K 7361 (JIS 1997 Plastics—Determination of the Total Luminous Transmittance of Transparent Materials—Part 1: Single Beam Instrument) and ISO 14782 (ISO 1997 Plastics—Determination of Haze of Transparent Materials). To improve the measurement accuracy of the current standards, a new apparatus was designed by the Center for Measurement Standards (Yu et al 2006 Meas. Sci. Technol. 17 N29-36). Besides the methods mentioned above, a double-beam method is used in the design of some instruments. There are discrepancies between the various methods. But no matter which method is used, a white standard is always needed. This paper compares the measurement results from different methods, presents the effect of the white standard, and analyses the measurement uncertainty.

Assesment of access to bibliographic databases and telemetry databases in Astronomy: A groundswell for development.

NASA Astrophysics Data System (ADS)

Diaz-Merced, Wanda Liz; Casado, Johanna; Garcia, Beatriz; Aarnio, Alicia; Knierman, Karen; Monkiewicz, Jacqueline; Alicia Aarnio.

2018-01-01

Big Data" is a subject that has taken special relevance today, particularly in Astrophysics, where continuous advances in technology are leading to ever larger data sets. A multimodal approach in perception of astronomical data data (achieved through sonification used for the processing of data) increases the detection of signals in very low signal-to-noise ratio limits and is of special importance to achieve greater inclusion in the field of Astronomy. In the last ten years, different software tools have been developed that perform the sonification of astronomical data from tables or databases, among them the best known and in multiplatform development are Sonification Sandbox, MathTrack, and xSonify.In order to determine the accessibility of software we propose to start carrying out a conformity analysis of ISO (International Standard Organization) 9241-171171: 2008. This standard establishes the general guidelines that must be taken into account for accessibility in software design, and it is applied to software used in work, public places, and at home. To analyze the accessibility of web databases, we take into account the "Web Content Content Accessibility Guidelines (WCAG) 2.0", accepted and published by ISO in the ISO / IEC 40500: 2012 standard.In this poster, we present a User Centered Design (UCD), Human Computer Interaction (HCI), and User Experience (UX) framework to address a non-segregational provision of access to bibliographic databases and telemetry databases in Astronomy. Our framework is based on an ISO evaluation on a selection of data bases such as ADS, Simbad and SDSS. The WCAG 2.0 and ISO 9241-171171: 2008 should not be taken as absolute accessibility standards: these guidelines are very general, are not absolute, and do not address particularities. They are not to be taken as a substitute for UCD, HCI, UX design and evaluation. Based on our results, this research presents the framework for a focus group and qualitative data analysis aimed to lay the foundations for the employment of UCD functionalities on astronomical databases.

MOLES Information Model

NASA Astrophysics Data System (ADS)

Ventouras, Spiros; Lawrence, Bryan; Woolf, Andrew; Cox, Simon

2010-05-01

The Metadata Objects for Linking Environmental Sciences (MOLES) model has been developed within the Natural Environment Research Council (NERC) DataGrid project [NERC DataGrid] to fill a missing part of the ‘metadata spectrum'. It is a framework within which to encode the relationships between the tools used to obtain data, the activities which organised their use, and the datasets produced. MOLES is primarily of use to consumers of data, especially in an interdisciplinary context, to allow them to establish details of provenance, and to compare and contrast such information without recourse to discipline-specific metadata or private communications with the original investigators [Lawrence et al 2009]. MOLES is also of use to the custodians of data, providing an organising paradigm for the data and metadata. The work described in this paper is a high-level view of the structure and content of a recent major revision of MOLES (v3.3) carried out as part of a NERC DataGrid extension project. The concepts of MOLES v3.3 are rooted in the harmonised ISO model [Harmonised ISO model] - particularly in metadata standards (ISO 19115, ISO 19115-2) and the ‘Observations and Measurements' conceptual model (ISO 19156). MOLES exploits existing concepts and relationships, and specialises information in these standards. A typical sequence of data capturing involves one or more projects under which a number of activities are undertaken, using appropriate tools and methods to produce the datasets. Following this typical sequence, the relevant metadata can be partitioned into the following main sections - helpful in mapping onto the most suitable standards from the ISO 19100 series. • Project section • Activity section (including both observation acquisition and numerical computation) • Observation section (metadata regarding the methods used to obtained the data, the spatial and temporal sampling regime, quality etc.) • Observation collection section The key concepts in MOLES v3.3 are: a) the result of an observation is defined uniquely from the property (of a feature-of-interest), the sampling-feature (carrying the targeted property values), the procedure used to obtain the result and the time (discrete instant or period) at which the observation takes place. b) an ‘Acquisition' and a ‘Computation' can serve as the basis for describing any observation process chain (procedure). The ‘Acquisition' uses an instrument - sensor or human being - to produce the results and is associated with field trips, flights, cruises etc., whereas the ‘Computation' class involves specific processing steps. A process chain may consist of any combination of ‘Acquisitions' and/or ‘Computations' occurring in parallel or in any order during the data capturing sequence. c) The results can be organised in collections with significantly more flexibility than if one used the original project alone d) the structure of individual observation collections may be domain-specific, in general; however we are investigating the use of CSML (Climate Science Modelling Language) for atmospheric data The model has been tested as a desk exercise by constructing object models for scenarios from various disciplines. References NERC DATAGRID: http://ndg.nerc.ac.uk LAWRENCE ET. AL. ,Information in environmental data grids, Phil. Trans. R. Soc. A, March 2009 vol. 367 no. 1890 1003-1014 ISO HARMONISED MODEL: All relevant ISO standards for geographic metadata from the TC211 series (eg. ISO 19xxx), and is harmonised within a formal UML description in the ‘HollowWorld' packages available at https://www.seegrid.csiro.au/twiki/bin/view/AppSchemas/HollowWorld

a Comparison of Evaluations and Assessments Obtained Using Alternative Standards for Predicting the Hazards of Whole-Body Vibration and Repeated Shocks

NASA Astrophysics Data System (ADS)

Lewis, C. H.; Griffin, M. J.

1998-08-01

There are three current standards that might be used to assess the vibration and shock transmitted by a vehicle seat with respect to possible effects on human health: ISO 2631/1 (1985), BS 6841 (1987) and ISO 2631-1 (1997). Evaluations have been performed on the seat accelerations measured in nine different transport environments (bus, car, mobile crane, fork-lift truck, tank, ambulance, power boat, inflatable boat, mountain bike) in conditions that might be considered severe. For each environment, limiting daily exposure durations were estimated by comparing the frequency weighted root mean square (i.e., r.m.s.) accelerations and the vibration dose values (i.e.,VDV), calculated according to each standard with the relevant exposure limits, action level and health guidance caution zones. Very different estimates of the limiting daily exposure duration can be obtained using the methods described in the three standards. Differences were observed due to variations in the shapes of the frequency weightings, the phase responses of the frequency weighting filters, the method of combining multi-axis vibration, the averaging method, and the assessment method. With the evaluated motions, differences in the shapes of the weighting filters results in up to about 31% difference in r.m.s. acceleration between the “old” and the “new” ISO standard and up to about 14% difference between BS 6841 and the “new” ISO 2631. There were correspondingly greater differences in the estimates of safe daily exposure durations. With three of the more severe motions there was a difference of more than 250% between estimated safe daily exposure durations based on r.m.s. acceleration and those based on fourth power vibration dose values. The vibration dose values provided the more cautious assessments of the limiting daily exposure duration.

[ISO 9001certification of a quality management system in a clinical investigation center].

PubMed

Chesnais, Jimmy; Fougerou-Leurent, Claire; Laforest, Claire; Renault, Alain; Bellissant, Eric; Laviolle, Bruno

2018-05-03

Beyond the application of legal requirements, clinical trials must have a permanent approach of quality control. The clinical investigation centers (CICs) are academic structures of clinical research certified by the French National institute of health and medical research (Inserm) and whose functioning relies on recommendations of good practice. It is important to accompany this standardization of practices by the implementation of a quality management system. This article presents the process that enabled the CIC of Rennes to become certified ISO 9001 by French standards association (Afnor) certification in May, 2016. The application of the fundamental principles of the standard ISO 9001 in the domain of clinical research is approached. The problem of the perimeter for the certification and the related process mapping are exposed. The activities of methodology, management and analysis of clinical studies were chosen for the initial certification of the CIC of Rennes. The perspectives for the extension of the perimeter of certification are also approached at the end of article. Copyright © 2018 Société française de pharmacologie et de thérapeutique. Published by Elsevier Masson SAS. All rights reserved.

Evaluation of cold workplaces: an overview of standards for assessment of cold stress.

PubMed

Holmér, Ingvar

2009-07-01

Many persons world wide are exposed to cold environments, either indoors for example in cold stores, or outdoors. Cold is a hazard to health and may affect safety and performance of work. Basis for the creation of safe and optimal working conditions may be obtained by the application of relevant international standards. ISO 11079 presents a method for evaluation of whole body heat balance. On the basis of climate and activity a required clothing insulation (IREQ) for heat balance is determined. For clothing with known insulation value an exposure time limited is calculated. ISO 11079 also includes criteria for assessment of local cooling. Finger temperatures should not be below 24 degrees C during prolonged exposures or 15 degrees C occasionally. Wind chill temperature indicates the risk of bare skin to freeze for combinations of wind and low temperatures. Special protection of airways is recommended at temperatures below -20 degrees C, in particular during heavy work. Additional standards are available describing evaluation strategies, work place observation checklists and checklist for medical screening. Risks associated with contact with cold surfaces can be evaluated with ISO 13732. The strategy and principles for assessment and prevention of cold stress are reviewed in this paper.

Applying ISO 11929:2010 Standard to detection limit calculation in least-squares based multi-nuclide gamma-ray spectrum evaluation

NASA Astrophysics Data System (ADS)

Kanisch, G.

2017-05-01

The concepts of ISO 11929 (2010) are applied to evaluation of radionuclide activities from more complex multi-nuclide gamma-ray spectra. From net peak areas estimated by peak fitting, activities and their standard uncertainties are calculated by weighted linear least-squares method with an additional step, where uncertainties of the design matrix elements are taken into account. A numerical treatment of the standard's uncertainty function, based on ISO 11929 Annex C.5, leads to a procedure for deriving decision threshold and detection limit values. The methods shown allow resolving interferences between radionuclide activities also in case of calculating detection limits where they can improve the latter by including more than one gamma line per radionuclide. The co"mmon single nuclide weighted mean is extended to an interference-corrected (generalized) weighted mean, which, combined with the least-squares method, allows faster detection limit calculations. In addition, a new grouped uncertainty budget was inferred, which for each radionuclide gives uncertainty budgets from seven main variables, such as net count rates, peak efficiencies, gamma emission intensities and others; grouping refers to summation over lists of peaks per radionuclide.

Determination of Labeled Fatty Acids Content in Milk Products, Infant Formula, and Adult/Pediatric Nutritional Formula by Capillary Gas Chromatography: Collaborative Study, Final Action 2012.13.

PubMed

Golay, Pierre-Alain; Moulin, Julie

2016-01-01

A collaborative study was conducted on AOAC First Action Method 2012.13 "Determination of Labeled Fatty Acids Content in Milk Products and Infant Formula by Capillary Gas Chromatography," which is based on an initial International Organization for Standardization (ISO)-International Dairy Federation (IDF) New Work Item that has been moved forward to ISO 16958:2015|IDF 231:2015 in November 2015. It was decided to merge the two activities after the agreement signed between ISO and AOAC in June 2012 to develop common standards and to avoid duplicate work. The collaborative study was performed after having provided highly satisfactory single-laboratory validation results [Golay, P.A., & Dong, Y. (2015) J. AOAC Int. 98, 1679-1696] that exceeded the performance criteria defined in AOAC Standard Method Performance Requirement (SMPR(®)) 2012.011 (September 29, 2012) on 12 products selected by the AOAC Stakeholder Panel on Infant Formula (SPIFAN). After a qualification period of 1 month, 18 laboratories participated in the fatty acids analysis of 12 different samples in duplicate. Six samples were selected to meet AOAC SPIFAN requirements (i.e., infant formula and adult nutritionals in powder and liquid formats), and the other Six samples were selected to meet ISO-IDF requirements (i.e., dairy products such as milk powder, liquid milk, cream, butter, infant formula with milk, and cheese). The fatty acids were analyzed directly in all samples without preliminary fat extraction, except in one sample (cheese). Powdered samples were analyzed after dissolution (i.e., reconstitution) in water, whereas liquid samples (or extracted fat) were analyzed directly. After addition of the internal standards solution [C11:0 fatty acid methyl ester (FAME) and C13:0 triacylglycerols (TAG)] to the samples, fatty acids attached to lipids were transformed into FAMEs by direct transesterification using methanolic sodium methoxide. FAMEs were separated using highly polar capillary GLC and were identified by comparison with the retention times of pure analytical standards. Quantification of fatty acids was done relative to C11:0 FAME as internal standard and to instrument response factors (determined separately using calibration standards mixture). The performance of the method (i.e., transesterification) was monitored in all samples using the second internal standard, C13:0 TAG. RSDR values were summarized separately for labeled fatty acids in SPIFAN materials and ISO-IDF materials due to different expression of results. This method was applied to representative dairy, infant formula, and adult/pediatric nutritional products and demonstrated global acceptable reproducibility precision for all fatty acids analyzed (i.e., 46 individuals and/or groups) for these categories of products.

A comprehensive evaluation of strip performance in multiple blood glucose monitoring systems.

PubMed

Katz, Laurence B; Macleod, Kirsty; Grady, Mike; Cameron, Hilary; Pfützner, Andreas; Setford, Steven

2015-05-01

Accurate self-monitoring of blood glucose is a key component of effective self-management of glycemic control. Accurate self-monitoring of blood glucose results are required for optimal insulin dosing and detection of hypoglycemia. However, blood glucose monitoring systems may be susceptible to error from test strip, user, environmental and pharmacological factors. This report evaluated 5 blood glucose monitoring systems that each use Verio glucose test strips for precision, effect of hematocrit and interferences in laboratory testing, and lay user and system accuracy in clinical testing according to the guidelines in ISO15197:2013(E). Performance of OneTouch(®) VerioVue™ met or exceeded standards described in ISO15197:2013 for precision, hematocrit performance and interference testing in a laboratory setting. Performance of OneTouch(®) Verio IQ™, OneTouch(®) Verio Pro™, OneTouch(®) Verio™, OneTouch(®) VerioVue™ and Omni Pod each met or exceeded accuracy standards for user performance and system accuracy in a clinical setting set forth in ISO15197:2013(E).

DOD Information Technology Standard Guidance (ITSG) Version 3.1

DTIC Science & Technology

1997-04-07

from NGSBs later (e.g., OSFs Motif specification became the basis for IEEE 1295 . 1). Most consortia specifications are available now, do not overlap...Illumination) CIM Center for Information Management (DISA) CINC Conumnder in Chief CIS CASE Integration Services CJCS Chairman of the Joint Chiefs of...Compound Text Encoding CUA Common User Access DAC Discretionary Access Controls DAD Draft Addendum (ISO) DAM Draft Amendment (ISO) DAP Document

Combat Helmet-Headform Coupling Characterized from Blunt Impact Events

DTIC Science & Technology

2011-11-01

Testing was completed on a monorail drop tower to analyze the effect of helmet/headform coupling on the blunt impact behavior of ACH helmets using FMVSS...designates its own methods and test equipment: a drop tower ( monorail or twin- wire), headform (DOT, ISO, NOCSAE), headform CG accelerometer (single or...the more anthropomorphic International Standard Organization (ISO) half headform. Testing was completed on a monorail drop tower to analyze the effect

Announcing a Community Effort to Create an Information Model for Research Software Archives

NASA Astrophysics Data System (ADS)

Million, C.; Brazier, A.; King, T.; Hayes, A.

2018-04-01

An effort has started to create recommendations and standards for the archiving of planetary science research software. The primary goal is to define an information model that is consistent with OAIS standards.

Simultaneous validation of the Grandway MD2301 digital automatic blood pressure monitor by the British Hypertension Society and the Association for the Advancement of Medical Instrumentation/the International Organization for Standardization protocols.

PubMed

Huang, Jinhua; Wang, Yun; Liu, Zhaoying; Wang, Yuling

2017-02-01

The aim of this study was to determine the accuracy of the Grandway MD2301 digital automatic blood pressure monitor by the British Hypertension Society (BHS) and the Association for the Advancement of Medical Instrumentation (AAMI)/the International Organization for Standardization (ISO) protocols. A total of 85 participants were included for evaluation based on the requirements of the BHS and the AAMI/ISO protocols. The validation procedure and data analysis followed the protocols precisely. The device achieved A/A grading for the BHS protocol and maintained A/A grading throughout the low, medium and high blood pressure ranges. The device also fulfilled the requirement of the AAMI/ISO protocol with device-observer differences of -0.9±5.6 and 0.8±5.2 mmHg for systolic and diastolic blood pressure, respectively, for criterion 1, and -0.9±4.7 and 0.8±4.2 mmHg, respectively, for criterion 2. The Grandway MD2301 digital automatic blood pressure monitor achieved A/A grade of the BHS protocol and passed the requirements of the AAMI/ISO protocol in adults.

Enumeration of total aerobic microorganisms in foods by SimPlate Total Plate Count-Color Indicator methods and conventional culture methods: collaborative study.

PubMed

Feldsine, Philip T; Leung, Stephanie C; Lienau, Andrew H; Mui, Linda A; Townsend, David E

2003-01-01

The relative efficacy of the SimPlate Total Plate Count-Color Indicator (TPC-CI) method (SimPlate 35 degrees C) was compared with the AOAC Official Method 966.23 (AOAC 35 degrees C) for enumeration of total aerobic microorganisms in foods. The SimPlate TPC-CI method, incubated at 30 degrees C (SimPlate 30 degrees C), was also compared with the International Organization for Standardization (ISO) 4833 method (ISO 30 degrees C). Six food types were analyzed: ground black pepper, flour, nut meats, frozen hamburger patties, frozen fruits, and fresh vegetables. All foods tested were naturally contaminated. Nineteen laboratories throughout North America and Europe participated in the study. Three method comparisons were conducted. In general, there was <0.3 mean log count difference in recovery among the SimPlate methods and their corresponding reference methods. Mean log counts between the 2 reference methods were also very similar. Repeatability (Sr) and reproducibility (SR) standard deviations were similar among the 3 method comparisons. The SimPlate method (35 degrees C) and the AOAC method were comparable for enumerating total aerobic microorganisms in foods. Similarly, the SimPlate method (30 degrees C) was comparable to the ISO method when samples were prepared and incubated according to the ISO method.

Accuracy Evaluation of 19 Blood Glucose Monitoring Systems Manufactured in the Asia-Pacific Region: A Multicenter Study.

PubMed

Yu-Fei, Wang; Wei-Ping, Jia; Ming-Hsun, Wu; Miao-O, Chien; Ming-Chang, Hsieh; Chi-Pin, Wang; Ming-Shih, Lee

2017-09-01

System accuracy of current blood glucose monitors (BGMs) in the market has already been evaluated extensively, yet mostly focused on European and North American manufacturers. Data on BGMs manufactured in the Asia-Pacific region remain to be established. In this study, we sought to assess the accuracy performance of 19 BGMs manufactured in the Asia-pacific region. A total of 19 BGMs were obtained from local pharmacies in China. The study was conducted at three hospitals located in the Asia-Pacific region. Measurement results of each system were compared with results of the reference instrument (YSI 2300 PLUS Glucose Analyzer), and accuracy evaluation was performed in accordance to the ISO 15197:2003 and updated 2015 guidelines. Radar plots, which is a new method, are described herein to visualize the analytical performance of the 19 BGMs evaluated. Consensus error grid is a tool for evaluating the clinical significance of the results. The 19 BGMs resulted in a satisfaction rate between 83.5% and 100.0% within ISO 15197:2003 error limits, and between 71.3% and 100.0% within EN ISO 15197:2015 (ISO 15197:2013) error limits. Of the 19 BGMs evaluated, 12 met the minimal accuracy requirement of the ISO 15197:2003 standard, whereas only 4 met the tighter EN ISO 15197:2015 (ISO 15197:2013) requirements. Accuracy evaluation of BGMs should be performed regularly to maximize patient safety.

Dietary Phenolic Acids of Macrotyloma uniflorum (Horse Gram) Protect the Rat Heart Against Isoproterenol-Induced Myocardial Infarction.

PubMed

Panda, Vandana; Laddha, Ankit; Nandave, Mukesh; Srinath, Sudhamani

2016-07-01

The present study investigates the cardioprotective activity of the Macrotyloma uniflorum seed extract (MUSE) and its phenolic acids (p-coumaric acid and ferulic acid) in isoproterenol (ISO)-induced myocardial infarction in rats. The previously mentioned phenolic acids were isolated and quantified from MUSE by HPLC. Pretreatment of gemfibrozil (reference standard), MUSE (250 and 500 mg/kg) and the phenolic acids for 30 days to rats treated with ISO (85 mg/kg) on the last 2 days resulted in a significant attenuation of the ISO-elevated levels of serum marker enzymes (aspartate aminotransferase, lactate dehydrogenase and creatine phosphokinase MB), total cholesterol, triglycerides, uric acid, C-reactive protein and malondialdehyde and a restoration of the levels of the ISO-depleted marker enzymes, reduced glutathione and the antioxidant enzymes-superoxide dismutase, catalase, glutathione peroxidase and glutathione reductase in heart. Restoration of the ISO-altered electrocardiogram pattern and haemodynamic parameters (left ventricular end diastolic pressure, heart rate, systolic, diastolic and mean arterial pressure) was also brought about by treatment with MUSE and the phenolic acids. It may be concluded that MUSE treatment to ISO-challenged rats exhibits a significant cardioprotective effect probably because of the potent antioxidant activity of its phenolic acids that salvage the myocardium from the deleterious effects of ISO. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

A generic archive protocol and an implementation

NASA Technical Reports Server (NTRS)

Jordan, J. M.; Jennings, D. G.; Mcglynn, T. A.; Ruggiero, N. G.; Serlemitsos, T. A.

1992-01-01

Archiving vast amounts of data has become a major part of every scientific space mission today. The Generic Archive/Retrieval Services Protocol (GRASP) addresses the question of how to archive the data collected in an environment where the underlying hardware archives may be rapidly changing. GRASP is a device independent specification defining a set of functions for storing and retrieving data from an archive, as well as other support functions. GRASP is divided into two levels: the Transfer Interface and the Action Interface. The Transfer Interface is computer/archive independent code while the Action Interface contains code which is dedicated to each archive/computer addressed. Implementations of the GRASP specification are currently available for DECstations running Ultrix, Sparcstations running SunOS, and microVAX/VAXstation 3100's. The underlying archive is assumed to function as a standard Unix or VMS file system. The code, written in C, is a single suite of files. Preprocessing commands define the machine unique code sections in the device interface. The implementation was written, to the greatest extent possible, using only ANSI standard C functions.

Analytical methods for determining fire resistance of timber members

Treesearch

Robert H. White

2008-01-01

The fire resistance ratings of wood members and assemblies, as of other materials, have traditionally been obtained by testing the assembly in a furnace in accordance with ASTM International (ASTM) Standard E119, International Organization for Standardization (ISO) Standard 834, and similar standards. These ratings are published in listings, such as Underwriters...

Digitized Archival Primary Sources in STEM: A Selected Webliography

ERIC Educational Resources Information Center

Jankowski, Amy

2017-01-01

Accessibility and findability of digitized archival resources can be a challenge, particularly for students or researchers not familiar with archival formats and digital interfaces, which adhere to different descriptive standards than more widely familiar library resources. Numerous aggregate archival collection databases exist, which provide a…

Characterization of HANARO neutron radiography facility in accordance with ASTM standard E545-91/E803-91 for KOLAS/ISO17025.

PubMed

Cheul-Muu, Sim; Ki-Yong, Nam; In-Cheol, Lim; Chang-Hee, Lee; Ha-Lim, Choi

2004-10-01

As neutron radiography is even more in demand for industrial applications of aircraft, turbine blade, automobile, explosive igniters, etc, it is necessary to review the standards which are the most appropriate for preparing the procedures for setting up the QA system. Recently, Korea Of Lab Accreditation Scheme (KOLAS) was originated from ISO 17025. It is widely recognized by research peer groups for conducting valid tests. The neutron radiography facility (NRF) of High Flux Advanced Neutron Application Reactor (HANARO), which started ion 1996, is the preliminary stages of KOLAS. The HANARO NRF is not only characterized using ASTM standards E545-91/E803-91 to satisfy the requirements of KOLAS, but in the design phase of the tomography system.

How to obtain traceability on optical radiation measurements?

NASA Astrophysics Data System (ADS)

Matamoros García, Carlos H.

2006-02-01

Traceability to national standards provides confidence in measurements results, granting a guaranty when carrying out governmental rules and when demonstrating conformity with quality requirements such as ISO 9000 or ISO/IEC 17025 (and the Mexican equivalent standards). The appropriate traceability contributes with confidence of the quality of products or services. This paper presents different ways to obtain traceability in Mexico for the optical radiation measurements, mentioning some applications, and highlighting the necessity of having traceability to the appropriate units of the SI. Additionally it present the national standards maintained by Centro Nacional de Metrologia (CENAM), the national metrology institute in Mexico, that give the technical support to Mexican measurements in this field and the international recognition that the personal of the Optics and Radiometry Division had gained in 10 years of development.

Evaluation of Blood Glucose Monitoring System in Screening for Neonatal Hypoglycemia: Tighter Accuracy Standard.

PubMed

Tsao, Mei-Fen; Chang, Hui-Wen; Chang, Chien-Hsi; Cheng, Chi-Hsuan; Lin, Hsiu-Chen

2017-05-01

Neonatal hypoglycemia may cause severe neurological damages; therefore, tight glycemic control is crucial to identify neonate at risk. Previous blood glucose monitoring system (BGMS) failed to perform well in neonates; there are calls for the tightening of accuracy requirements. It remains a need for accurate BGMS for effective bedside diabetes management in neonatal care within a hospital population. A total of 300 neonates were recruited from local hospitals. Accuracy performance of a commercially available BGMS was evaluated against reference instrument in screening for neonatal hypoglycemia, and assessment was made based on the ISO15197:2013 and a tighter standard. At blood glucose level < 47 mg/dl, BGMS assessed met the minimal accuracy requirement of ISO 15197:2013 and tighter standard at 100% and 97.2%, respectively.

Hydrogen Fuel Quality

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rockward, Tommy

2012-07-16

For the past 6 years, open discussions and/or meetings have been held and are still on-going with OEM, Hydrogen Suppliers, other test facilities from the North America Team and International collaborators regarding experimental results, fuel clean-up cost, modeling, and analytical techniques to help determine levels of constituents for the development of an international standard for hydrogen fuel quality (ISO TC197 WG-12). Significant progress has been made. The process for the fuel standard is entering final stages as a result of the technical accomplishments. The objectives are to: (1) Determine the allowable levels of hydrogen fuel contaminants in support of themore » development of science-based international standards for hydrogen fuel quality (ISO TC197 WG-12); and (2) Validate the ASTM test method for determining low levels of non-hydrogen constituents.« less

Assessment of opacimeter calibration according to International Standard Organization 10155.

PubMed

Gomes, J F

2001-01-01

This paper compares the calibration method for opacimeters issued by the International Standard Organization (ISO) 10155 with the manual reference method for determination of dust content in stack gases. ISO 10155 requires at least nine operational measurements, corresponding to three operational measurements per each dust emission range within the stack. The procedure is assessed by comparison with previous calibration methods for opacimeters using only two operational measurements from a set of measurements made at stacks from pulp mills. The results show that even if the international standard for opacimeter calibration requires that the calibration curve is to be obtained using 3 x 3 points, a calibration curve derived using 3 points could be, at times, acceptable in statistical terms, provided that the amplitude of individual measurements is low.

Validation of a rapid micellar electrokinetic capillary chromatographic method for the simultaneous determination of isoniazid and pyridoxine hydrochloride in pharmaceutical formulation.

PubMed

Nemutlu, E; Celebier, M; Uyar, B; Altinöz, S

2007-07-01

An efficient and reliable micellar electrokinetic capillary chromatography (MEKC) method has been developed for the simultaneous determination of isoniazid (ISO) and pyridoxine hydrochloride (PYR) in pharmaceutical formulations. A chemometric two level full factorial design approach was used to search for the optimum conditions of separation. Three parameters were selected for this study: the buffer pH, the buffer concentration and sodium dodecyl sulphate (SDS) concentrations. Resolution, peak symmetry and analysis time were established as response. The two analytes were separated within 6 min with the optimized conditions: 50 mM borate buffer, 25 mM SDS pH 7.8, 35 degrees C, at 50 mbar 4s injection and 30 kV by using a fused silica capillary (72 cm effective length, 50 microm i.d.). The detection wavelength was set to 205 nm. Meloxicam was used as internal standard. The method was validated with respect to stability, linearity range, limit of quantitation and detection, precision, accuracy, specificity and robustness. The detection limits of the method were 1.0 microg mL(-1) for ISO and 0.40 microg mL(-1) for PYR and the method was linear at least in the range of 3.0-100 microg mL(-1) for ISO and 1.0-100 microg mL(-1) for PYR with excellent correlation coefficients (0.9995 for ISO and 0.9998 for PYR). Relative standard deviations (R.S.D.s) of the described method ranged between 0.54 and 2.27% for intra-day precision and between 0.65 and 2.69% for inter-day precision. The developed method was applied to the tablet form of ISO and PYR-containing the pharmaceutical preparations and the data were compared with obtained from the standard addition method. No statistically significant difference was found.

Strengthening the regulatory system through the implementation and use of a quality management system.

PubMed

Eisner, Reinhold; Patel, Rakeshkumar

2017-04-20

Quality management systems (QMS), based on ISO 9001 requirements, are applicable to government service organizations such as Health Canada's Biologics and Genetic Therapies Directorate (BGTD). This communication presents the process that the BGTD followed since the early 2000s to implement a quality management system and describes how the regulatory system was improved as a result of this project. BGTD undertook the implementation of a quality management system based on ISO 9001 and containing aspects of ISO 17025 with the goal of strengthening the regulatory system through improvements in the people, processes, and services of the organization. We discuss the strategy used by BGTD to implement the QMS and the benefits that were realized from the various stages of implementation. The eight quality principals upon which the QMS standards of the ISO 9000 series are based were used by senior management as a framework to guide QMS implementation.

Traffic volume trends 1998

DOT National Transportation Integrated Search

2012-11-01

Harmonization Task Groups 1 and 3 (HTG1 and 3) were established by the EU-US International Standards Harmonization Working Group to attempt to harmonize standards (including ISO, CEN, ETSI, IEEE) on security (HTG1) and communications protocols (HTG3)...

Transportation users' views of quality

DOT National Transportation Integrated Search

2012-11-01

Harmonization Task Groups 1 and 3 (HTG1 and 3) were established by the EU-US International Standards Harmonization Working Group to attempt to harmonize standards (including ISO, CEN, ETSI, IEEE) on security (HTG1) and communications protocols (HTG3)...

Educational Labeling System for Atmospheres (ELSA): Python Tool Development for Archiving Under the PDS4 Standard

NASA Astrophysics Data System (ADS)

Neakrase, Lynn; Hornung, Danae; Sweebe, Kathrine; Huber, Lyle; Chanover, Nancy J.; Stevenson, Zena; Berdis, Jodi; Johnson, Joni J.; Beebe, Reta F.

2017-10-01

The Research and Analysis programs within NASA’s Planetary Science Division now require archiving of resultant data with the Planetary Data System (PDS) or an equivalent archive. The PDS Atmospheres Node is developing an online environment for assisting data providers with this task. The Educational Labeling System for Atmospheres (ELSA) is being designed with Django/Python coding to provide an easier environment for facilitating not only communication with the PDS node, but also streamlining the process of learning, developing, submitting, and reviewing archive bundles under the new PDS4 archiving standard. Under the PDS4 standard, data are archived in bundles, collections, and basic products that form an organizational hierarchy of interconnected labels that describe the data and relationships between the data and its documentation. PDS4 labels are implemented using Extensible Markup Language (XML), which is an international standard for managing metadata. Potential data providers entering the ELSA environment can learn more about PDS4, plan and develop label templates, and build their archive bundles. ELSA provides an interface to tailor label templates aiding in the creation of required internal Logical Identifiers (URN - Uniform Resource Names) and Context References (missions, instruments, targets, facilities, etc.). The underlying structure of ELSA uses Django/Python code that make maintaining and updating the interface easy to do for our undergraduate/graduate students. The ELSA environment will soon provide an interface for using the tailored templates in a pipeline to produce entire collections of labeled products, essentially building the user’s archive bundle. Once the pieces of the archive bundle are assembled, ELSA provides options for queuing the completed bundle for peer review. The peer review process has also been streamlined for online access and tracking to help make the archiving process with PDS as transparent as possible. We discuss the current status of ELSA and provide examples of its implementation.

Comprehensive outsourcing biobanking facility to serve the international research community.

PubMed

Diaferia, Giuseppe R; Biunno, Ida; DeBlasio, Pasquale

2011-06-01

The validity of results from biomarker studies using archived specimens depends on the integrity of the specimens and the manner in which they are collected, processed, and stored. The management of a huge amount of biomaterial generated from research studies and clinical trials is becoming a very demanding task and many organizations are facing the choice between in-house storage and processing and outsourcing some activities. Storage and logistic functions are the prime targets for outsourcing, because to sustain these critical assets organizations must have the expertise, the dedicated qualified personnel, the proper quality control programs, and available resources to fulfill the mandatory requirements to maintain the integrity of the samples. External biobanks are dedicated and certified infrastructures (ISO, GMP, etc.) that apply efficient logistic and shipping activities, use validated standard operating procedures, install appropriate monitoring back-up systems, and, most of all, have room for expansion. Thus, the choice between in-house biobanking and outsourcing cannot be exclusively based on a financial decision; it must also consider (i) type of collection/project, (ii) logistic complexity (number and locations of collection sites), (iii) safety requirements, (iv) functional expertise, and (v) business priorities.

Definition and evaluation of the data-link layer of PACnet

NASA Astrophysics Data System (ADS)

Alsafadi, Yasser H.; Martinez, Ralph; Sanders, William H.

1991-07-01

PACnet is a 200-500 Mbps dual-ring fiber optic network designed to implement a picture archiving and communication system (PACS) in a hospital environment. The network consists of three channels: an image transfer channel, a command and control channel, and a real-time data channel. An initial network interface unit (NIU) design for PACnet consisted of a functional description of the protocols and NIU major components. In order to develop a demonstration prototype, additional definition of protocol algorithms of each channel is necessary. Using the International Standards Organization/Open Systems Interconnection (ISO/OSI) reference model as a guide, the definition of the data link layer is extended. This definition covers interface service specifications for the two constituent sublayers: logical link control (LLC) and medium access control (MAC). Furthermore, it describes procedures for data transfer, mechanisms of error detection and fault recovery. A performance evaluation study was then made to determine how the network performs under various application scenarios. The performance evaluation study was performed using stochastic activity networks, which can formally describe the network behavior. The results of the study demonstrate the feasibility of PACnet as an integrated image, data, and voice network for PACS.

ANZSoilML: An Australian - New Zealand standard for exchange of soil data

NASA Astrophysics Data System (ADS)

Simons, Bruce; Wilson, Peter; Ritchie, Alistair; Cox, Simon

2013-04-01

The Australian-New Zealand soil information exchange standard (ANZSoilML) is a GML-based standard designed to allow the discovery, query and delivery of soil and landscape data via standard Open Geospatial Consortium (OGC) Web Feature Services. ANZSoilML modifies the Australian soil exchange standard (OzSoilML), which is based on the Australian Soil Information Transfer and Evaluation System (SITES) database design and exchange protocols, to meet the New Zealand National Soils Database requirements. The most significant change was the removal of the lists of CodeList terms in OzSoilML, which were based on the field methods specified in the 'Australian Soil and Land Survey Field Handbook'. These were replaced with empty CodeLists as placeholders to external vocabularies to allow the use of New Zealand vocabularies without violating the data model. Testing of the use of these separately governed Australian and New Zealand vocabularies has commenced. ANZSoilML attempts to accommodate the proposed International Organization for Standardization ISO/DIS 28258 standard for soil quality. For the most part, ANZSoilML is consistent with the ISO model, although major differences arise as a result of: • The need to specify the properties appropriate for each feature type; • The inclusion of soil-related 'Landscape' features; • Allowing the mapping of soil surfaces, bodies, layers and horizons, independent of the soil profile; • Allowing specifying the relationships between the various soil features; • Specifying soil horizons as specialisations of soil layers; • Removing duplication of features provided by the ISO Observation & Measurements standard. The International Union of Soil Sciences (IUSS) Working Group on Soil Information Standards (WG-SIS) aims to develop, promote and maintain a standard to facilitate the exchange of soils data and information. Developing an international exchange standard that is compatible with existing and emerging national and regional standards is a considerable challenge. ANZSoilML is proposed as a profile of the more generalised SoilML model being progressed through the IUSS Working Group.

CM and DM in an ISO R and D Environment

NASA Technical Reports Server (NTRS)

Crowley, Sandra L.

2000-01-01

ISO 9000 - a common buzz word in industry is making inroads to government agencies. The National Aeronautics and Space Agency (NASA) achieved ISO 9001 certification at each of its nine (9) Centers and Headquarters in 1998-1999. NASA Glenn Research Center (GRC) was recommended for certification in September 1999. Since then, each of the Centers has been going through the semi-annual surveillance audits. Growing out of the manufacturing industry, successful application of the international quality standard to a research and development (R&D) environment has had its challenges. This paper will address how GRC applied Configuration Management (CM) and Data (or Document) Management (DM) to meet challenges to achieve ISO certification. One of the first challenges was to fit the ISO 9001-1994 elements to the GRC environment. Some of the elements fit well-Management Responsibility (4.1), Internal Audits (4.17), Document and Data Control (4.5). Other elements were not suited or applied easily to the R&D environment-Servicing (4.19), Statistical Techniques (4.20). Since GRC "builds" only one or two items at a time, these elements were considered not applicable to the environment.

Transforming an EPA QA/R-2 quality management plan into an ISO 9002 quality management system.

PubMed

Kell, R A; Hedin, C M; Kassakhian, G H; Reynolds, E S

2001-01-01

The Environmental Protection Agency's (EPA) Office of Emergency and Remedial Response (OERR) requires environmental data of known quality to support Superfund hazardous waste site projects. The Quality Assurance Technical Support (QATS) Program is operated by Shaw Environmental and Infrastructure, Inc. to provide EPA's Analytical Operations Center (AOC) with performance evaluation samples, reference materials, on-site laboratory auditing capabilities, data audits (including electronic media data audits), methods development, and other support services. The new QATS contract awarded in November 2000 required that the QATS Program become ISO 9000 certified. In a first for an EPA contractor, the QATS staff and management successfully transformed EPA's QA/R-2 type Quality Management Plan into a Quality Management System (QMS) that complies with the requirements of the internationally recognized ISO 9002 standard and achieved certification in the United States, Canada, and throughout Europe. The presentation describes how quality system elements of ISO 9002 were implemented on an already existing quality system. The psychological and organizational challenges of the culture change in QATS' day-to-day operations will be discussed for the benefit of other ISO 9000 aspirants.

Evaluation of the performance of the OneTouch Select Plus blood glucose test system against ISO 15197:2013.

PubMed

Setford, Steven; Smith, Antony; McColl, David; Grady, Mike; Koria, Krisna; Cameron, Hilary

2015-01-01

Assess laboratory and in-clinic performance of the OneTouch Select(®) Plus test system against ISO 15197:2013 standard for measurement of blood glucose. System performance assessed in laboratory against key patient, environmental and pharmacologic factors. User performance was assessed in clinic by system-naïve lay-users. Healthcare professionals assessed system accuracy on diabetes subjects in clinic. The system demonstrated high levels of performance, meeting ISO 15197:2013 requirements in laboratory testing (precision, linearity, hematocrit, temperature, humidity and altitude). System performance was tested against 28 interferents, with an adverse interfering effect only being recorded for pralidoxime iodide. Clinic user performance results fulfilled ISO 15197:2013 accuracy criteria. Subjects agreed that the color range indicator clearly showed if they were low, in-range or high and helped them better understand glucose results. The system evaluated is accurate and meets all ISO 15197:2013 requirements as per the tests described. The color range indicator helped subjects understand glucose results and supports patients in following healthcare professional recommendations on glucose targets.

PRESENTATION TYPE: Round Table Discussion (80 minutes) TITLE: Unlocking the ‘Omics Archive: Enabling Toxicogenomic/Proteomic Investigation from Archival Samples

EPA Science Inventory

Formalin fixation and paraffin embedding (FFPE) is a cross-industry gold standard for preparing nonclinical and clinical samples for histopathological assessment which preserves tissue architecture and enables storage of tissue in archival banks. These archival banks are an untap...

Resources for Archives: Developing Collections, Constituents, Colleagues, and Capital

ERIC Educational Resources Information Center

Primer, Ben

2009-01-01

The essential element for archival success is to be found in the quality of management decisions made and public services provided. Archivists can develop first-class archives operations through understanding the organizational context; planning; hiring, retaining, and developing staff; meeting archival standards for storage and access; and…

Role of inspectors in external review mechanisms: criteria for selection, training and appraisal.

PubMed

Plebani, M

2001-07-20

There is a wide consensus that an external review mechanism, both in the form of a peer review, accreditation and certification according to the ISO 9000 series, is more than its standards. The survey process, the role of inspectors and standard interpretation contribute to the essence of the programme itself. Above all, the criteria used for the selection, training and appraisal of inspectors are of paramount importance. While the ISO norms do not require certification bodies to employ "peer reviewers" for the healthcare sector, experience in this sector is the main criterion for recruiting inspectors in accreditation and peer review programmes. However, the ISO/IEC Guide 58, for the setting up and operation of a laboratory accreditation body, specifies that inspectors should have appropriate technical knowledge of the specific calibrations, tests or types of calibration or tests for which accreditation is sought. Training, updating and assessment of inspectors are clearly defined under ISO, but are also systematic under accreditation programmes. Part-time inspectors who are professionals currently practising in a healthcare facility and are in touch with the day-to-day work reality are preferred for accreditation programmes which have self-regulation, education and quality improvement as their main concerns, while full-time and external inspectors are used in external review mechanisms with registration and certification as their main concerns. As well as harmonising the standards for accreditation, it is important to obtain consensus on the criteria to use for the selection, training and assessment of inspectors in order to ensure that different national or international programmes gain mutual recognition.

The fourth radiation transfer model intercomparison (RAMI-IV): Proficiency testing of canopy reflectance models with ISO-13528

NASA Astrophysics Data System (ADS)

Widlowski, J.-L.; Pinty, B.; Lopatka, M.; Atzberger, C.; Buzica, D.; Chelle, M.; Disney, M.; Gastellu-Etchegorry, J.-P.; Gerboles, M.; Gobron, N.; Grau, E.; Huang, H.; Kallel, A.; Kobayashi, H.; Lewis, P. E.; Qin, W.; Schlerf, M.; Stuckens, J.; Xie, D.

2013-07-01

The radiation transfer model intercomparison (RAMI) activity aims at assessing the reliability of physics-based radiative transfer (RT) models under controlled experimental conditions. RAMI focuses on computer simulation models that mimic the interactions of radiation with plant canopies. These models are increasingly used in the development of satellite retrieval algorithms for terrestrial essential climate variables (ECVs). Rather than applying ad hoc performance metrics, RAMI-IV makes use of existing ISO standards to enhance the rigor of its protocols evaluating the quality of RT models. ISO-13528 was developed "to determine the performance of individual laboratories for specific tests or measurements." More specifically, it aims to guarantee that measurement results fall within specified tolerance criteria from a known reference. Of particular interest to RAMI is that ISO-13528 provides guidelines for comparisons where the true value of the target quantity is unknown. In those cases, "truth" must be replaced by a reliable "conventional reference value" to enable absolute performance tests. This contribution will show, for the first time, how the ISO-13528 standard developed by the chemical and physical measurement communities can be applied to proficiency testing of computer simulation models. Step by step, the pre-screening of data, the identification of reference solutions, and the choice of proficiency statistics will be discussed and illustrated with simulation results from the RAMI-IV "abstract canopy" scenarios. Detailed performance statistics of the participating RT models will be provided and the role of the accuracy of the reference solutions as well as the choice of the tolerance criteria will be highlighted.

Why did ISO 9001:2008 system fail to deliver?

PubMed

Langford, Melvyn

2014-02-01

This article is based on an actual investigation undertaken, and summarises the subsequent report's findings and observations. It has been anonymised for obvious reasons. In May 2013 an analysis was undertaken by a multidisciplinary team that compared an NHS Trust estates department's managerial systems against the NHS national recommendations. The conclusions stated that: 'There was a systemic failure across a large number of topics generating intolerable/substantial risks to the organisation, its staff, and patients; this despite the department's managerial systems being accredited to the International Standard ISO 9001:2008'. The natural question raised when presented with this demonstrable and auditable evidence was: 'Why did the ISO 9001:2008 system fail?'

Influence of Solar and Thermal Radiation on Future Heat Stress Using CMIP5 Archive Driving the Community Land Model Version 4.5

NASA Astrophysics Data System (ADS)

Buzan, J. R.; Huber, M.

2015-12-01

The summer of 2015 has experienced major heat waves on 4 continents, and heat stress left ~4000 people dead in India and Pakistan. Heat stress is caused by a combination of meteorological factors: temperature, humidity, and radiation. The International Organization for Standardization (ISO) uses Wet Bulb Globe Temperature (WBGT)—an empirical metric this is calibrated with temperature, humidity, and radiation—for determining labor capacity during heat stress. Unfortunately, most literature studying global heat stress focuses on extreme temperature events, and a limited number of studies use the combination of temperature and humidity. Recent global assessments use WBGT, yet omit the radiation component without recalibrating the metric.Here we explicitly calculate future WBGT within a land surface model, including radiative fluxes as produced by a modeled globe thermometer. We use the Community Land Model version 4.5 (CLM4.5), which is a component model of the Community Earth System Model (CESM), and is maintained by the National Center for Atmospheric Research (NCAR). To drive our CLM4.5 simulations, we use greenhouse gasses Representative Concentration Pathway 8.5 (business as usual), and atmospheric output from the CMIP5 Archive. Humans work in a variety of environments, and we place the modeled globe thermometer in a variety of environments. We modify CLM4.5 code to calculate solar and thermal radiation fluxes below and above canopy vegetation, and in bare ground. To calculate wet bulb temperature, we implemented the HumanIndexMod into CLM4.5. The temperature, wet bulb temperature, and radiation fields are calculated at every model time step and are outputted 4x Daily. We use these fields to calculate WBGT and labor capacity for two time slices: 2026-2045 and 2081-2100.

How do gait frequency and serum-replacement interval affect polyethylene wear in knee-wear simulator tests?

PubMed

Reinders, Jörn; Sonntag, Robert; Kretzer, Jan Philippe

2014-11-01

Polyethylene wear (PE) is known to be a limiting factor in total joint replacements. However, a standardized wear test (e.g. ISO standard) can only replicate the complex in vivo loading condition in a simplified form. In this study, two different parameters were analyzed: (a) Bovine serum, as a substitute for synovial fluid, is typically replaced every 500,000 cycles. However, a continuous regeneration takes place in vivo. How does serum-replacement interval affect the wear rate of total knee replacements? (b) Patients with an artificial joint show reduced gait frequencies compared to standardized testing. What is the influence of a reduced frequency? Three knee wear tests were run: (a) reference test (ISO), (b) testing with a shortened lubricant replacement interval, (c) testing with reduced frequency. The wear behavior was determined based on gravimetric measurements and wear particle analysis. The results showed that the reduced test frequency only had a small effect on wear behavior. Testing with 1 Hz frequency is therefore a valid method for wear testing. However, testing with a shortened replacement interval nearly doubled the wear rate. Wear particle analysis revealed only small differences in wear particle size between the different tests. Wear particles were not linearly released within one replacement interval. The ISO standard should be revised to address the marked effects of lubricant replacement interval on wear rate.

[Implementation of the technical requirements of the UNE-EN-ISO 15189 quality standard in a mycobacterial laboratory].

PubMed

Guna Serrano, M del Remedio; Ocete Mochón, M Dolores; Lahiguera, M José; Bresó, M Carmen; Gimeno Cardona, Concepción

2013-02-01

The UNE-EN-ISO 15189:2007 standard defines the requirements for quality and competence that must be met by medical laboratories. These laboratories should use this international standard to develop their own quality management systems and to evaluate their own competencies; in turn, this standard will be used by accreditation bodies to confirm or recognize the laboratories' competence. In clinical microbiology laboratories, application of the standard implies the implementation of the technical and specific management requirements that must be met to achieve optimal quality when carrying out microbiological tests. In Spain, accreditation is granted by the Spanish Accreditation Body (Entidad Nacional de Acreditación). This review aims to discuss the practical application of the standard's technical requirements in mycobacterial laboratory. Firstly, we define the scope of accreditation. Secondly, we specify how the items of the standard on personnel management, control of equipment, environmental facilities, method validation, internal controls and customer satisfaction surveys were developed and implemented in our laboratory. Copyright © 2013 Elsevier España, S.L. All rights reserved.

Determination of dissolved bromate in drinking water by ion chromatography and post column reaction: interlaboratory study.

PubMed

Cordeiro, Fernando; Robouch, Piotr; de la Calle, Maria Beatriz; Emteborg, Håkan; Charoud-Got, Jean; Schmitz, Franz

2011-01-01

A collaborative study, International Evaluation Measurement Programme-25a, was conducted in accordance with international protocols to determine the performance characteristics of an analytical method for the determination of dissolved bromate in drinking water. The method should fulfill the analytical requirements of Council Directive 98/83/EC (referred to in this work as the Drinking Water Directive; DWD). The new draft standard method under investigation is based on ion chromatography followed by post-column reaction and UV detection. The collaborating laboratories used the Draft International Organization for Standardization (ISO)/Draft International Standard (DIS) 11206 document. The existing standard method (ISO 15061:2001) is based on ion chromatography using suppressed conductivity detection, in which a preconcentration step may be required for the determination of bromate concentrations as low as 3 to 5 microg/L. The new method includes a dilution step that reduces the matrix effects, thus allowing the determination of bromate concentrations down to 0.5 microg/L. Furthermore, the method aims to minimize any potential interference of chlorite ions. The collaborative study investigated different types of drinking water, such as soft, hard, and mineral water. Other types of water, such as raw water (untreated), swimming pool water, a blank (named river water), and a bromate standard solution, were included as test samples. All test matrixes except the swimming pool water were spiked with high-purity potassium bromate to obtain bromate concentrations ranging from 1.67 to 10.0 microg/L. Swimming pool water was not spiked, as this water was incurred with bromate. Test samples were dispatched to 17 laboratories from nine different countries. Sixteen participants reported results. The repeatability RSD (RSD(r)) ranged from 1.2 to 4.1%, while the reproducibility RSD (RSDR) ranged from 2.3 to 5.9%. These precision characteristics compare favorably with those of ISO 15601. A thorough comparison of the performance characteristics is presented in this report. All method performance characteristics obtained in the frame of this collaborative study indicate that the draft ISO/DIS 11206 standard method meets the requirements set down by the DWD. It can, therefore, be considered to fit its intended analytical purpose.

Dredged Material Evaluations: Review of Zooplankton Toxicity Test Methods for Marine Water Quality Evaluations

DTIC Science & Technology

2016-09-01

Standardization (ISO). 2015. Water quality - calanoid copepod early- life stage test with Acartia tonsa. ISO 16778:2015. International Organization for...Toxicity Test Methods for Marine Water Quality Evaluations by Alan J Kennedy, Guilherme Lotufo, Jennifer G. Laird, and J. Daniel Farrar PURPOSE: The...MPRSA evaluations in some regions. The organisms used in these test methods are not planktonic for most of their life cycles (juveniles and adults

Infrared Analysis of Gasoline/Alcohol Blends.

DTIC Science & Technology

1981-02-01

in storage, routine handling and distribution. As a result, other oxygenates such as methanol , iso-propanol, t-butanoA, methyl -t- butyl ether, and...Table 1 lists TABLE 1. ALCOHOL ANALYTE BAND NUMBERS -1 Component Analytical Frequency, cm Gasoline 967 Methanol 1030 Ethanol 882 iso-propanol 952 t...of varying concen- trations of each alcohol in a gasoline were obtained, with Figure 4 showing a low and high standard for methanol . The net peak

The National SShipbuilding Research Program. 1997 Ship Production Symposium. Proceedings

DTIC Science & Technology

1997-04-01

continues to advance the value and potential benefit of an ISO style process management system will increase. ISO provides the framework that is...understanding of systemic management beyond the buzzword level. In fairness , this probably is attributed to the fact that middle managers often perceive they...common or accepted practice. In the United States, the phrase of laisse - faire , or freedom of choice coupled with a lack of uniform standards continues to

ISO 55000: Creating an asset management system.

PubMed

Bradley, Chris; Main, Kevin

2015-02-01

In the October 2014 issue of HEJ, Keith Hamer, group vice-president, Asset Management & Engineering at Sodexo, and marketing director at Asset Wisdom, Kevin Main, argued that the new ISO 55000 standards present facilities managers with an opportunity to create 'a joined-up, whole lifecycle approach' to managing and delivering value from assets. In this article, Kevin Main and Chris Bradley, who runs various asset management projects, examine the process of creating an asset management system.

Predicting the quantifiable impacts of ISO 50001 on climate change mitigation

DOE Office of Scientific and Technical Information (OSTI.GOV)

McKane, Aimee; Therkelsen, Peter; Scodel, Anna

The ISO 50001-Energy management standard provides a continual improvement framework for organizations to reduce their energy consumption, which in the industrial and commercial (service) sectors, accounts for nearly 40% of global greenhouse gas emissions. Reducing this energy consumption will be critical for countries to achieve their national greenhouse gas reduction commitments. Several national policies already support ISO 50001; however, there is no transparent, consistent process to estimate the potential impacts of its implementation. This paper presents the ISO 50001 Impacts Methodology, an internationally-developed methodology to calculate these impacts at a national, regional, or global scale suitable for use by policymakers.more » The recently-formed ISO 50001 Global Impacts Research Network provides a forum for policymakers to refine and encourage use of the methodology. Using this methodology, a scenario with 50% of projected global industrial and service sector energy consumption under ISO 50001 management by 2030 would generate cumulative primary energy savings of approximately 105 EJ, cost savings of nearly US $700 billion (discounted to 2016 net present value), and 6500 million metric tons (Mt) of avoided CO 2 emissions. The avoided annual CO 2 emissions in 2030 alone are equivalent to removing 210 million passenger vehicles from the road.« less

Evaluation of ISO CRS Envelopes Relative to U.S. Vehicles and Child Restraint Systems.

PubMed

Hu, Jingwen; Manary, Miriam A; Klinich, Kathleen D; Reed, Matthew P

2015-01-01

The objectives of this study are to use computer simulation to evaluate the International Organization for Standardization (ISO) 13216-3:2006(E) child restraint system (CRS) envelopes relative to rear seat compartments from vehicles and CRSs in the U.S. market, investigate the potential compatibility issues of U.S. vehicles and CRSs, and demonstrate whether necessary modifications can be made to introduce such a system into compatibility evaluations between U.S. vehicles and CRSs. Three-dimensional geometry models for 26 vehicles and 16 convertible CRS designs developed previously were used. Geometry models of 3 forward-facing and 3 rear-facing CRS envelopes provided by the ISO were built in the current study. The virtual fit process closely followed the physical procedures described in the ISO standards. The results showed that the current ISO rear-facing envelopes can provide reasonable classifications for CRSs and vehicles, but the forward-facing envelopes do not represent products currently in the U.S. market. In particular, all of the selected vehicles could accommodate the largest forward-facing CRS envelope at the second-row seat location behind the driver seat. In contrast, half of the selected CRSs could not fit within any of the forward-facing ISO CRS envelopes, mainly due to protrusion at the rear-top corner of the envelope. The results also indicate that the rear seat compartment in U.S. vehicles often cannot accommodate a large portion of convertible CRSs in the rear-facing position. The increased demand for vehicle fuel economy and the recommendation to keep children rear-facing longer may lead to smaller cars and larger CRSs, which may increase the potential for fit problems. The virtual classifications indicated that contact between the forward-facing CRSs and the head restraints in the rear seats as well as that between the rear-facing CRSs and the back of the front seats is a main concern regarding the compatibility between the vehicles and the CRSs. Therefore, modification of the current ISO forward-facing CRS envelopes will likely to be necessary to ensure that they are useful for the U.S. market.

The Gaia Archive at ESAC: a VO-inside archive

NASA Astrophysics Data System (ADS)

Gonzalez-Nunez, J.

2015-12-01

The ESDC (ESAC Science Data Center) is one of the active members of the IVOA (International Virtual Observatory Alliance) that have defined a set of standards, libraries and concepts that allows to create flexible,scalable and interoperable architectures on the data archives development. In the case of astronomy science that involves the use of big catalogues, as in Gaia or Euclid, TAP, UWS and VOSpace standards can be used to create an architecture that allows the explotation of this valuable data from the community. Also, new challenges arise like the implementation of the new paradigm "move code close to the data", what can be partially obtained by the extension of the protocols (TAP+, UWS+, etc) or the languages (ADQL). We explain how we have used VO standards and libraries for the Gaia Archive that, not only have producing an open and interoperable archive but, also, minimizing the developement on certain areas. Also we will explain how we have extended these protocols and the future plans.

R-matrix electron-impact excitation data for the Li-like iso-electronic sequence including Auger and radiation damping

NASA Astrophysics Data System (ADS)

Liang, G. Y.; Badnell, N. R.

2011-04-01

We present results for the electron-impact excitation of all Li-like ions from Be+ to Kr33+ which we obtained using the radiation- and Auger-damped intermediate-coupling frame transformation R-matrix approach. We have included both valence- and core-electron excitations up to the 1s25l and 1s2l4l' levels, respectively. A detailed comparison of the target structure and collision data has been made for four specific ions (O5+, Ar15+, Fe23+ and Kr33+) spanning the sequence so as to assess the accuracy for the entire sequence. Effective collision strengths (Υs) are presented at temperatures ranging from 2 × 102(z + 1)2 K to 2 × 106(z + 1)2 K (where z is the residual charge of the ions, i.e. Z - 3). Detailed comparisons for the Υs are made with the results of previous calculations for several ions which span the sequence. The radiation and Auger damping effects were explored for core-excitations along the iso-electronic sequence. Furthermore, we examined the iso-electronic trends of effective collision strengths as a function of temperature. These data are made available in the archives of APAP via http://www.apap-network.org, OPEN-ADAS via http://open.adas.ac.uk, as well as anonymous ftp to cdsarc.u-strasbg.fr (130.79.128.5) or via http://cdsweb.u-strasbg.fr/cgi-bin/qcat?J/A+A/528/A69

Automated surface quality inspection with ARGOS: a case study

NASA Astrophysics Data System (ADS)

Kiefhaber, Daniel; Etzold, Fabian; Warken, Arno F.; Asfour, Jean-Michel

2017-06-01

The commercial availability of automated inspection systems for optical surfaces specified according to ISO 10110-7 promises unsupervised and automated quality control with reproducible results. In this study, the classification results of the ARGOS inspection system are compared to the decisions by well-trained inspectors based on manual-visual inspection. Both are found to agree in 93.6% of the studied cases. Exemplary cases with differing results are studied, and shown to be partly caused by shortcomings of the ISO 10110-7 standard, which was written for the industry standard manual-visual inspection. Applying it to high resolution images of the whole surface of objective machine vision systems brings with it a few challenges which are discussed.

Datacube Interoperability, Encoding Independence, and Analytics

NASA Astrophysics Data System (ADS)

Baumann, Peter; Hirschorn, Eric; Maso, Joan

2017-04-01

Datacubes are commonly accepted as an enabling paradigm which provides a handy abstraction for accessing and analyzing the zillions of image files delivered by the manifold satellite instruments and climate simulations, among others. Additionally, datacubes are the classic model for statistical and OLAP datacubes, so a further information category can be integrated. From a standards perspective, spatio-temporal datacubes naturally are included in the concept of coverages which encompass regular and irregular grids, point clouds, and general meshes - or, more abstractly, digital representations of spatio-temporally varying phenomena. ISO 19123, which is identical to OGC Abstract Topic 6, gives a high-level abstract definition which is complemented by the OGC Coverage Implementation Schema (CIS) which is an interoperable, yet format independent concretization of the abstract model. Currently, ISO is working on adopting OGC CIS as ISO 19123-2; the existing ISO 19123 standard is under revision by one of the abstract authors and will become ISO 19123-1. The roadmap agreed by ISO further foresees adoption of the OGC Web Coverage Service (WCS) as an ISO standard so that a complete data and service model will exist. In 2016, INSPIRE has adopted WCS as Coverage Download Service, including the datacube analytics language Web Coverage Processing Service (WCPS). The rasdaman technology (www.rasdaman.org) is both OGC and INSPIRE Reference Implementation. In the global EarthServer initiative rasdaman database sizes are exceeding 250 TB today, heading for the Petabyte frontier well in 2017. Technically, CIS defines a compact, efficient model for representing multi-dimensional datacubes in several ways. The classical coverage cube defines a domain set (where are values?), a range set (what are these values?), and range type (what do the values mean?), as well as a "bag" for arbitrary metadata. With CIS 1.1, coordinate/value pair sequences have been added, as well as tiled representations. Further, CIS 1.1 offers a unified model for any kind of regular and irregular grids, also allowing sensor models as per SensorML. Encodings include ASCII formats like GML, JSON, RDF as well as binary formats like GeoTIFF, NetCDF, JPEG2000, and GRIB2; further, a container concept allows mixed representations within one coverage file utilizing zip or other convenient package formats. Through the tight integration with the Sensor Web Enablement (SWE), a lossless "transport" from sensor into coverage world is ensured. The corresponding service model of WCS supports datacube operations ranging from simple data extraction to complex ad-hoc analytics with WPCS. Notably, W3C is working has set out on a coverage model as well; it has been designed relatively independently from the abovementioned standards, but there is informal agreement to link it into the CIS universe (which allows for different, yet interchangeable representations). Particularly interesting in the W3C proposal is the detailed semantic modeling of metadata; as CIS 1.1 supports RDF, a tight coupling seems feasible.

Our Nation's Travel: 1995 NPTS Early Results Report

DOT National Transportation Integrated Search

2012-11-01

Harmonization Task Groups 1 and 3 (HTG1 and 3) were established by the EU-US International Standards Harmonization Working Group to attempt to harmonize standards (including ISO, CEN, ETSI, IEEE) on security (HTG1) and communications protocols (HTG3)...

A hybrid design methodology for structuring an Integrated Environmental Management System (IEMS) for shipping business.

PubMed

Celik, Metin

2009-03-01

The International Safety Management (ISM) Code defines a broad framework for the safe management and operation of merchant ships, maintaining high standards of safety and environmental protection. On the other hand, ISO 14001:2004 provides a generic, worldwide environmental management standard that has been utilized by several industries. Both the ISM Code and ISO 14001:2004 have the practical goal of establishing a sustainable Integrated Environmental Management System (IEMS) for shipping businesses. This paper presents a hybrid design methodology that shows how requirements from both standards can be combined into a single execution scheme. Specifically, the Analytic Hierarchy Process (AHP) and Fuzzy Axiomatic Design (FAD) are used to structure an IEMS for ship management companies. This research provides decision aid to maritime executives in order to enhance the environmental performance in the shipping industry.

Evaluation of thermal cameras in quality systems according to ISO 9000 or EN 45000 standards

NASA Astrophysics Data System (ADS)

Chrzanowski, Krzysztof

2001-03-01

According to the international standards ISO 9001-9004 and EN 45001-45003 the industrial plants and the accreditation laboratories that implemented the quality systems according to these standards are required to evaluate an uncertainty of measurements. Manufacturers of thermal cameras do not offer any data that could enable estimation of measurement uncertainty of these imagers. Difficulties in determining the measurement uncertainty is an important limitation of thermal cameras for applications in the industrial plants and the cooperating accreditation laboratories that have implemented these quality systems. A set of parameters for characterization of commercial thermal cameras, a measuring set, some results of testing of these cameras, a mathematical model of uncertainty, and a software that enables quick calculation of uncertainty of temperature measurements with thermal cameras are presented in this paper.

[Description of the ISO 9001/2000 certification process in the parenteral nutrition area].

PubMed

Miana Mena, M T; Fontanals Martínez, S; López Púa, Y; López Suñé, E; Codina Jané, C; Ribas Sala, J

2007-01-01

In order to guarantee quality and safety and to increase user satisfaction, healthcare organisations have integrated quality management systems into their structures. This study describes the process for introducing the UNE-EN-ISO-9001/2000 standard in the parenteral nutrition area. A multidisciplinary group established the scope of the standard, focusing on transcription, preparation, dispensation and microbiological control. A detailed procedure describing the sequences of circuits and associated activities, the responsible staff and the action guidelines to be followed was established. Quality and activity markers were also established. This process has enabled a standard system to be implemented, with its operation perfectly described and documented, allowing its stages to be traceable and supervised. As there is no record of the data obtained beforehand, no direct comparison can be made; its evolution must therefore be analysed in the future.

A document centric metadata registration tool constructing earth environmental data infrastructure

NASA Astrophysics Data System (ADS)

Ichino, M.; Kinutani, H.; Ono, M.; Shimizu, T.; Yoshikawa, M.; Masuda, K.; Fukuda, K.; Kawamoto, H.

2009-12-01

DIAS (Data Integration and Analysis System) is one of GEOSS activities in Japan. It is also a leading part of the GEOSS task with the same name defined in GEOSS Ten Year Implementation Plan. The main mission of DIAS is to construct data infrastructure that can effectively integrate earth environmental data such as observation data, numerical model outputs, and socio-economic data provided from the fields of climate, water cycle, ecosystem, ocean, biodiversity and agriculture. Some of DIAS's data products are available at the following web site of http://www.jamstec.go.jp/e/medid/dias. Most of earth environmental data commonly have spatial and temporal attributes such as the covering geographic scope or the created date. The metadata standards including these common attributes are published by the geographic information technical committee (TC211) in ISO (the International Organization for Standardization) as specifications of ISO 19115:2003 and 19139:2007. Accordingly, DIAS metadata is developed with basing on ISO/TC211 metadata standards. From the viewpoint of data users, metadata is useful not only for data retrieval and analysis but also for interoperability and information sharing among experts, beginners and nonprofessionals. On the other hand, from the viewpoint of data providers, two problems were pointed out after discussions. One is that data providers prefer to minimize another tasks and spending time for creating metadata. Another is that data providers want to manage and publish documents to explain their data sets more comprehensively. Because of solving these problems, we have been developing a document centric metadata registration tool. The features of our tool are that the generated documents are available instantly and there is no extra cost for data providers to generate metadata. Also, this tool is developed as a Web application. So, this tool does not demand any software for data providers if they have a web-browser. The interface of the tool provides the section titles of the documents and by filling out the content of each section, the documents for the data sets are automatically published in PDF and HTML format. Furthermore, the metadata XML file which is compliant with ISO19115 and ISO19139 is created at the same moment. The generated metadata are managed in the metadata database of the DIAS project, and will be used in various ISO19139 compliant metadata management tools, such as GeoNetwork.

IMEKO TC1-TC7 Symposium in London: The assurance as a result of blood chemical analysis by ISO-GUM and QE

NASA Astrophysics Data System (ADS)

Iwaki, Y.

2010-07-01

The Quality Assurance (QA) of measurand has been discussed over many years by Quality Engineering (QE). It is need to more discuss about ISO standard. It is mining to find out root fault element for improvement of measured accuracy, and it remove. The accuracy assurance needs to investigate the Reference Material (RM) for calibration and an improvement accuracy of data processing. This research follows the accuracy improvement in field of data processing by how to improve of accuracy. As for the fault element relevant to measurement accuracy, in many cases, two or more element is buried exist. The QE is to assume the generating frequency of fault state, and it is solving from higher ranks for fault factor first by "Failure Mode and Effects Analysis (FMEA)". Then QE investigate the root cause over the fault element by "Root Cause Analysis (RCA)" and "Fault Tree Analysis (FTA)" and calculate order to the generating element of assume specific fault. These days comes, the accuracy assurance of measurement result became duty in the Professional Test (PT). ISO standard was legislated by ISO-GUM (Guide of express Uncertainty in Measurement) as guidance of an accuracy assurance in 1993 [1] for QA. Analysis method of ISO-GUM is changed into Exploratory Data Analysis (EDA) from Analysis of Valiance (ANOVA). EDA calculate one by one until an assurance performance is obtained according to "Law of the propagation of uncertainty". If the truth value was unknown, ISO-GUM is changed into reference value. A reference value set up by the EDA and it does check with a Key Comparison (KC) method. KC is comparing between null hypothesis and frequency hypothesis. It performs operation of assurance by ISO-GUM in order of standard uncertainty, the combined uncertainty of many fault elements and an expansion uncertain for assurance. An assurance value is authorized by multiplying the final expansion uncertainty [2] by K of coverage factor. K-value is calculated from the Effective Free Degree (EFD) which thought the number of samples is important. Free degree is based on maximum likelihood method of an improved information criterion (AIC) for a Quality Control (QC). The assurance performance of ISO-GUM is come out by set up of the confidence interval [3] and is decided. The result of research of "Decided level/Minimum Detectable Concentration (DL/MDC)" was able to profit by the operation. QE has developed for the QC of industry. However, these have been processed by regression analysis by making frequency probability of a statistic value into normalized distribution. The occurrence probability of the statistics value of a fault element which is accompanied element by a natural phenomenon becomes an abnormal distribution in many cases. The abnormal distribution needs to obtain an assurance value by other method than statistical work of type B in ISO-GUM. It is tried fusion the improvement of worker by QE became important for reservation of the reliability of measurement accuracy and safety. This research was to make the result of Blood Chemical Analysis (BCA) in the field of clinical test.

Archiving for Rosetta: Lessons for IPDA

NASA Astrophysics Data System (ADS)

Heather, David

The Rosetta Project is unusual, possibly unique, in that all data must be archived both in NASA's Planetary Data System (PDS), and in ESA's Planetary Science Archive (PSA), ac-cording to an inter-agency agreement that predates the existence of ESA's PSA. This requires that all data are formatted according to NASA's PDS3 Standards. Scientific peer reviews of the data content for Rosetta have been carried out both in the US and in Europe and there was a very large overlap of the issues raised, illustrating the general scientific agreement, independent of geography, in what an archive must contain to be useful to the broader community of planetary scientists. However, validation of the data against the PDS Standards using both PSA and PDS devel-oped software has led to the discovery that many of the items that are validated are unstated assumptions in the written PDS Standards and are related, at least in large part, to how the two archiving systems operate rather than to the actual content that a scientist needs to use the data. The talk will illustrate some of these discrepancies with examples and suggest how to avoid such issues in future, optimizing the scientific return on the investment in archiving while minimizing the costs.