Monitoring training load, recovery-stress state, immune-endocrine responses, and physical performance in elite female basketball players during a periodized training program.

PubMed

Nunes, João A; Moreira, Alexandre; Crewther, Blair T; Nosaka, Ken; Viveiros, Luis; Aoki, Marcelo S

2014-10-01

This study investigated the effect of a periodized training program on internal training load (ITL), recovery-stress state, immune-endocrine responses, and physical performance in 19 elite female basketball players. The participants were monitored across a 12-week period before an international championship, which included 2 overloading and tapering phases. The first overloading phase (fourth to sixth week) was followed by a 1-week tapering, and the second overloading phase (eighth to 10th week) was followed by a 2-week tapering. ITL (session rating of perceived exertion method) and recovery-stress state (RESTQ-76 Sport questionnaire) were assessed weekly and bi-weekly, respectively. Pretraining and posttraining assessments included measures of salivary IgA, testosterone and cortisol concentrations, strength, jumping power, running endurance, and agility. Internal training load increased across all weeks from 2 to 11 (p ≤ 0.05). After the first tapering period (week 7), a further increase in ITL was observed during the second overloading phase (p ≤ 0.05). After the second tapering period, a decrease in ITL was detected (p ≤ 0.05). A disturbance in athlete stress-recovery state was noted during the second overloading period (p ≤ 0.05), before returning to baseline level in end of the second tapering period. The training program led to significant improvements in the physical performance parameters evaluated. The salivary measures did not change despite the fluctuations in ITL. In conclusion, a periodized training program evoked changes in ITL in elite female basketball players, which appeared to influence their recovery-stress state. The training plan was effective in preparing participants for competition, as indicated by improvements in recovery-stress state and physical performance after tapering.

Relieving dyspnoea by non-invasive ventilation decreases pain thresholds in amyotrophic lateral sclerosis.

PubMed

Dangers, Laurence; Laviolette, Louis; Georges, Marjolaine; Gonzalez-Bermejo, Jésus; Rivals, Isabelle; Similowski, Thomas; Morelot-Panzini, Capucine

2017-03-01

Dyspnoea is a threatening sensation of respiratory discomfort that presents many similarities with pain. Experimental dyspnoea in healthy subjects induces analgesia. This 'dyspnoea-pain counter-irritation' could, in reverse, imply that relieving dyspnoea in patients with chronic respiratory diseases would lower their pain thresholds. We first determined pressure pain thresholds in 25 healthy volunteers (22-31 years; 13 men; handheld algometer), during unloaded breathing (BASELINE) and during inspiratory threshold loading (ITL). Two levels of loading were used, adjusted to induce dyspnoea self-rated at 60% or 80% of a 10 cm visual analogue scale (ITL6 and ITL8). 18 patients with chronic respiratory failure due to amyotrophic lateral sclerosis (ALS) were then studied during unassisted breathing and after 30 and 60 min of non-invasive ventilation-NIV30 and NIV60-(same dyspnoea evaluation). In healthy volunteers, pressure pain thresholds increased significantly in the deltoid during ITL6 (p<0.05) and ITL8 (p<0.05) and in the trapezius during ITL8 (p<0.05), validating the use of pressure pain thresholds to study dyspnoea-pain counter-irritation. In patients with ALS, the pressure pain thresholds measured in the deltoid during unassisted breathing decreased by a median of 24.5%-33.0% of baseline during NIV30 and NIV60 (p<0.05). Relieving dyspnoea by NIV in patients with ALS having respiratory failure is associated with decreased pressure pain thresholds. Clinical implications have yet to be determined, but this observation suggests that patients with ALS could become more susceptible to pain after the institution of NIV, hence the need for reinforced attention towards potentially painful diagnostic and therapeutic interventions. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Plain and Rolled Images from Paired Fingerprint Cards

National Institute of Standards and Technology Data Gateway

NIST Plain and Rolled Images from Paired Fingerprint Cards (Web, free access)   NIST Special Database 29 is being distributed for use in development and testing fingerprint matching systems. The data consist of 216 ten-print fingerprint card pairs with both the rolled and plains (from a bottom of the fingerprint card) scanned at 19.7 pixels per mm. A newer version of the compression/decompression software on the CDROM can be found at the website http://www.nist.gov/itl/iad/ig/nigos.cfm as part of the NBIS package.

Challenges of the Cassini Test Bed Simulating the Saturnian Environment

NASA Technical Reports Server (NTRS)

Hernandez, Juan C.; Badaruddin, Kareem S.

2007-01-01

The Cassini-Huygens mission is a joint NASA and European Space Agency (ESA) mission to collect scientific data of the Saturnian system and is managed by the Jet Propulsion Laboratory (JPL). After having arrived in Saturn orbit and releasing the ESA's Huygens probe for a highly successful descent and landing mission on Saturn's moon Titan, the Cassini orbiter continues on its tour of Saturn, its satellites, and the Saturnian environment. JPL's Cassini Integrated Test laboratory (ITL) is a dedicated high fidelity test bed that verifies and validates command sequences and flight software before upload to the Cassini spacecraft. The ITL provides artificial stimuli that allow a highly accurate hardware-in-the-loop test bed model that tests the operation of the Cassini spacecraft on the ground. This enables accurate prediction and recreation of mission events and flight software and hardware behavior. As we discovered more about the Saturnian environment, a combination of creative test methods and simulation changes were necessary to simulate the harmful effect that the optical and physical environment has on the pointing performance of Cassini. This paper presents the challenges experienced and overcome in that endeavor to simulate and test the post Saturn Orbit Insertion (SOI) and Probe Relay tour phase of the Cassini mission.

U.S. EPA, Pesticide Product Label, , 04/02/1984

EPA Pesticide Factsheets

2011-04-21

... " . v' I • l , J, .I,H, , I 'tit':' ir1'''', i:~tl'nt \\.,:itl: i:.', I" .. ' I :d' :,: ~ HL ~.:\\,J(!.\\j'lil' Ar,::, · ... Tolt·f.ll1cl' .,t bttlb~ t.' ~~E!-~A(T~: {,"l'; \\".1'',' 'lt~: \\'.lIil·tit's. Test.t ~,n"lll ...

Developing dental faculty for the future: ADEA/AAL Institute for Teaching and Learning, 2006-09.

PubMed

Haden, N Karl; Hendricson, William D; Killip, John W; O'Neill, Paula N; Reed, Michael J; Weinstein, George; Williams, John N; Valachovic, Richard W

2009-11-01

This report summarizes the history and curriculum of the American Dental Education Association/Academy for Academic Leadership Institute for Teaching and Learning (ADEA/AAL ITL) Program for Dental School Faculty, describes participant feedback, and reviews how the program serves the faculty development initiatives of the American Dental Education Association. The fifty-hour program (6.5 days), conducted in two phases at collaborating dental schools, enhances core academic competencies of new and transitional faculty, including faculty members whose responsibilities include predoctoral, allied, and postdoctoral dental education. The program's mission is to prepare participants to become more effective teachers and develop other skills that will facilitate confidence, job satisfaction, and professional growth in the academic environment. From 2005 to 2009, 174 individuals graduated from the program, representing forty-three schools of dentistry in the United States and Canada and twenty-nine private practices. A total of forty scholarships have been awarded to participants by the American Academy of Periodontology Foundation, the American Academy of Pediatric Dentistry, and the American Association of Orthodontists. In an online survey completed by 75 percent of ADEA/AAL ITL participants, 99 percent indicated they were positive or highly positive about their learning experience in this faculty development program. Ninety-six percent stated that the program had been important or very important in their effectiveness as a teacher. In 2010, the program will be held at the University of North Carolina at Chapel Hill School of Dentistry, with phase I occurring on August 19-22, 2010, and phase II on October 22-24, 2010. In summary, the ADEA/AAL ITL is addressing an unmet need through a formal professional development program designed to help new and potential faculty members thrive as educators and become future leaders in academic health care.

U.S. EPA, Pesticide Product Label, VETERINARIAN TYPE DISINFECTANT, 10/22/1980

EPA Pesticide Factsheets

2011-04-14

nlR[< I Itl'\\S fOJ;: !'S! GENER,\\l CI ,\\SSl F IrATI,·" i t ',j 3 It is ;1 viol"t{"l' tf r .. rl"ral ,.~". fl' ., .. pl'~duct in aI I9I11:nnf"r in.''1l ... • . t.·:1t '.·It" It l.ht"'liny. L ...

[Cost analysis of ultrasound-guided transrectal needle biopsy in prostatic carcinoma].

PubMed

Bissoli, E; Fandella, A; La Torre, E; Faggiano, L; Anselmo, G; Frasson, F

1998-04-01

The literature mortality and morbidity rates from prostatic carcinoma prompt to the better use of some routine diagnostic tools such as transrectal ultrasound-guided biopsy. We evaluated the overall cost of transrectal ultrasound biopsy (TRUSB) of the prostate and investigated the economic impact of the procedures currently used to diagnose prostatic carcinoma. The total cost of TRUSB was calculated with reference to 247 procedures performed in 1996. The following cost factors were evaluated: personnel, materials, maintenance-equipment depreciation, energy consumption and hospital overheads. A literature review was also carried out to check if our extrapolated costs corresponded to those of other authors worldwide and to consider them in the wider framework of the cost effectiveness of the strategies for the early diagnosis of prostatic cancer. The overall cost of TRUSB was Itl. 249,000, obtained by adding together the costs of: personnel (Itl. 160,000); materials (Itl. 59,000); equipment maintenance and depreciation (Itl. 12,400); energy consumption (Itl. 100); hospital overheads (Itl. 17,500). The literature review points out TRUSB as a clinically invasive tool for diagnosing prostatic carcinoma whose cost-effectiveness is debated. Cadaver studies report the presence of cancer cells in the prostate of 50% of 70-year-old men, while extrapolations calculate a morbidity from prostatic carcinoma in 9.5% of 50-year-old men. It is therefore obvious that randomized prostatic biopsies, methods apart, are very likely to be positive. This probability varies with the patient's age, the level of prostate specific antigen (PSA), the density of PSA/cm3 of prostate volume (PSAD), and the positivity of exploration and/or transrectal ultrasound findings. Despite the strict application of all these criteria and the critical assessment of the patient's general conditions, TRUSB is indicated for 16% of the male population over 50, with obvious implications. It has been recently suggested that the ratio between free PSA (antigen fraction of the total serum PSA) and total PSA could be clinically useful as an effective predict of TRUSB positivity or negativity. Free PSA evaluation might thus help reduce the number of TRUSB.

A Fifth Year Professional Training Program for Elementary School Teachers: Its Development through Mentoring and Internship.

ERIC Educational Resources Information Center

Jablonski, Ann

This paper describes the development of an experimental, alternative, graduate-level preservice teacher education program at Fordham University, the Internship Fellowship Program. The 15-month program includes an Instructional Training Laboratory (ITL) during the first summer, which supports the intern's acquisition of cognitive and performance…

Dual Resolution Images from Paired Fingerprint Cards

National Institute of Standards and Technology Data Gateway

NIST Dual Resolution Images from Paired Fingerprint Cards (Web, free access)   NIST Special Database 30 is being distributed for use in development and testing of fingerprint compression and fingerprint matching systems. The database allows the user to develop and evaluate data compression algorithms for fingerprint images scanned at both 19.7 ppmm (500 dpi) and 39.4 ppmm (1000 dpi). The data consist of 36 ten-print paired cards with both the rolled and plain images scanned at 19.7 and 39.4 pixels per mm. A newer version of the compression/decompression software on the CDROM can be found at the website http://www.nist.gov/itl/iad/ig/nigos.cfm as part of the NBIS package.

FOXE1 Association with Differentiated Thyroid Cancer and Its Progression

PubMed Central

Penna-Martinez, Marissa; Epp, Friederike; Kahles, Heinrich; Ramos-Lopez, Elizabeth; Hinsch, Nora; Hansmann, Martin-Leo; Selkinski, Ivan; Grünwald, Frank; Holzer, Katharina; Bechstein, Wolf O.; Zeuzem, Stefan; Vorländer, Christian

2014-01-01

Background: Single nucleotide polymorphisms (SNPs) near thyroid transcription factor genes (FOXE1 rs965513/NKX2-1 rs944289) have been shown to be associated with differentiated thyroid cancer (DTC) in Caucasoid populations. We investigated the role of those SNPs in German patients with DTC and also extended our analysis to tumor stages and lymphocytic infiltration of the tumors (ITL). Methods: Patients with DTC (n=243; papillary, PTC; follicular, FTC) and healthy controls (HC; n=270) were analyzed for the rs965513 and rs944289 SNPs. Results: The case-control analysis for rs965513 SNP showed that the genotypes “AA,” “AG,” and minor allele “A” were more frequent in patients with DTC than in HC (pronounced in PTC pgenotype=0.000084, pallele=0.006 than FTC pgenotype=0.29 and pallele=0.06). Furthermore, subgroup analysis of the DTC patients stratified for primary tumor stage (T1–T2, T3–T4), the absence or presence of regional lymph node metastases (N0, N1), for distant metastases (M0, M1), as well as for ITL, showed an association of rs965513 with stages T1–T2, T1–T3, N1, and absence of ITL. The NKX2-1 SNP rs944289, however, was not associated with DTC. Conclusion: Our results confirm that the FOXE1 rs965513 SNP confers an increased risk for DTC in the German population, particularly allele “A” and the genotypes “AA” and “AG” for PTC. This increased risk was also observed in advanced tumor stages and absence of ITL, which may reflect the course of a more aggressive disease. The NKX2-1 rs944289 SNP, however, appears to play a secondary role in the development of DTC in the German population. PMID:24325646

Relationships between rating-of-perceived-exertion- and heart-rate-derived internal training load in professional soccer players: a comparison of on-field integrated training sessions.

PubMed

Campos-Vazquez, Miguel Angel; Mendez-Villanueva, Alberto; Gonzalez-Jurado, Jose Antonio; León-Prados, Juan Antonio; Santalla, Alfredo; Suarez-Arrones, Luis

2015-07-01

To describe the internal training load (ITL) of common training sessions performed during a typical week and to determine the relationships between different indicators of ITL commonly employed in professional football (soccer). Session-rating-of-perceived-exertion TL (sRPE-TL) and heart-rate- (HR) derived measurements of ITL as Edwards TL and Stagno training impulses (TRIMPMOD) were used in 9 players during 3 periods of the season. The relationships between them were analyzed in different training sessions during a typical week: skill drills/circuit training + small-sided games (SCT+SSGs), ball-possession games+technical-tactical exercises (BPG+TTE), tactical training (TT), and prematch activation (PMa). HR values obtained during SCT+SSGs and BPG+TTE were substantially greater than those in the other 2 sessions, all the ITL markers and session duration were substantially greater in SCT+SSGs than in any other session, and all ITL measures in BPG+TTE were substantially greater than in TT and PMa sessions. Large relationships were found between HR>80% HRmax and HR>90% HRmax vs sRPE-TL during BPG+TTE and TT sessions (r=.61-.68). Very large relationships were found between Edwards TL and sRPE-TL and between TRIMPMOD and sRPE-TL in sessions with BPG+TTE and TT (r=.73-.87). Correlations between the different HR-based methods were always extremely large (r=.92-.98), and unclear correlations were observed for other relationships between variables. sRPE-TL provided variable-magnitude within-individual correlations with HR-derived measures of training intensity and load during different types of training sessions typically performed during a week in professional soccer. Caution should be applied when using RPE- or HR-derived measures of exercise intensity/load in soccer training interchangeably.

78 FR 64478 - Request for Comments on the Preliminary Cybersecurity Framework

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-29

... February 26, 2013, and a series of open public workshops. The preliminary Framework was developed in..., methodologies, procedures and processes that align policy, business, and technological approaches to address....nist.gov/itl/cyberframework.cfm . DATES: Comments must be received by 5:00 p.m. Eastern Time December...

Does Abutment Collar Length Affect Abutment Screw Loosening After Cyclic Loading?

PubMed

Siadat, Hakimeh; Pirmoazen, Salma; Beyabanaki, Elaheh; Alikhasi, Marzieh

2015-07-01

A significant vertical space that is corrected with vertical ridge augmentation may necessitate selection of longer abutments, which would lead to an increased vertical cantilever. This study investigated the influence of different abutment collar heights on single-unit dental implant screw-loosening after cyclic loading. Fifteen implant-abutment assemblies each consisted of an internal hexagonal implant were randomly assigned to 3 groups: Group1, consisting of 5 abutments with 1.5 mm gingival height (GH); Group2, 5 abutments with 3.5 mm GH; and Group3, 5 abutments with 5.5 mm GH. Each specimen was mounted in transparent auto-polymerizing acrylic resin block, and the abutment screw was tightened to 35 Ncm with an electric torque wrench. After 5 minutes, initial torque loss (ITL) was recorded for all specimens. Metal crowns were fabricated with 45° occlusal surface and were placed on the abutments. A cyclic load of 75 N and frequency of 1 Hz were applied perpendicular to the long axis of each specimen. After 500 000 cycles, secondary torque loss (STL) was recorded. One-way ANOVA analysis was used to evaluate the effects of abutment collar height before and after cyclic loading. One-way ANOVA showed that ITL among the groups was not significantly different (P = .52), while STL was significantly different among the groups (P = .008). Post-hoc Tukey HSD tests showed that STL values were significantly different between the abutments with 1.5 mm GH (Group1) and with 5.5 mm GH (Group3) (P = .007). A paired comparison t-test showed that cyclic loading significantly influenced the STL in comparison with the ITL in each group. Within the limitations of this study, it can be concluded that increase in height of the abutment collar could adversely affect the torque loss of the abutment screw.

Recombinant human tripeptidyl peptidase-1 infusion to the monkey CNS: Safety, pharmacokinetics, and distribution

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vuillemenot, Brian R., E-mail: bvuillemenot@bmrn.com; Kennedy, Derek; Reed, Randall P.

CLN2 disease is caused by deficiency in tripeptidyl peptidase-1 (TPP1), leading to neurodegeneration and death. The safety, pharmacokinetics (PK), and CNS distribution of recombinant human TPP1 (rhTPP1) were characterized following a single intracerebroventricular (ICV) or intrathecal-lumbar (IT-L) infusion to cynomolgus monkeys. Animals received 0, 5, 14, or 20 mg rhTPP1, ICV, or 14 mg IT-L, in artificial cerebrospinal fluid (aCSF) vehicle. Plasma and CSF were collected for PK analysis. Necropsies occurred at 3, 7, and 14 days post-infusion. CNS tissues were sampled for rhTPP1 distribution. TPP1 infusion was well tolerated and without effect on clinical observations or ECG. A mildmore » increase in CSF white blood cells (WBCs) was detected transiently after ICV infusion. Isolated histological changes related to catheter placement and infusion were observed in ICV treated animals, including vehicle controls. The CSF and plasma exposure profiles were equivalent between animals that received an ICV or IT-L infusion. TPP1 levels peaked at the end of infusion, at which point the enzyme was present in plasma at 0.3% to 0.5% of CSF levels. TPP1 was detected in brain tissues with half-lives of 3–14 days. CNS distribution between ICV and IT-L administration was similar, although ICV resulted in distribution to deep brain structures including the thalamus, midbrain, and striatum. Direct CNS infusion of rhTPP1 was well tolerated with no drug related safety findings. The favorable nonclinical profile of ICV rhTPP1 supports the treatment of CLN2 by direct administration to the CNS. - Highlights: • TPP1 enzyme replacement therapy to the CNS is in development for CLN2 disease. • Toxicology, pharmacokinetics, and CNS distribution were assessed in monkeys. • TPP1 infusion directly to the brain did not result in any safety concerns. • A positive pharmacokinetic and distribution profile resulted from TPP1 infusion. • This study demonstrates the feasibility of ICV administered rhTPP1 to treat CLN2.« less

Equitable Estoppel: Its Genesis, Development, and Application in Government Contracting

DTIC Science & Technology

1988-09-30

NO. CCESSION NO. ,1. T:ITLE (include Security Classification) (UNCLASSIFIED) Equitable Estoppel : Its Genesis, Development, and Application in...sE.UkRm/ CLASSIFICATION OF THIS PAGE AFIT/CI’ "OVERPRINT" Equitable Estoppel : Its Genesis, Development, and Application in Government CoritractingQ By...John Cibinic,Jr. and Ralph C. Nash,Jr. Professors of Law 90 02 12 031 -Table of Contents 1. The Doctrine of Equitable Estoppel -................... 1

Moving on? Predictors of Intent to Leave among Rural and Remote RNs in Canada

ERIC Educational Resources Information Center

Stewart, Norma J.; D'Arcy, Carl; Kosteniuk, Julie; Andrews, Mary Ellen; Morgan, Debra; Forbes, Dorothy; MacLeod, Martha L. P.; Kulig, Judith C.; Pitblado, J. Roger

2011-01-01

Context: Examination of factors related to the retention or voluntary turnover of Registered Nurses (RNs) has mainly focused on urban, acute care settings. Purpose: This paper explored predictors of intent to leave (ITL) a nursing position in all rural and remote practice settings in Canada. Based on the conceptual framework developed for this…

Architecture, Design, and System; Performance Assessment and Development Methodology for Computer-Based Systems. Volume 1. Methodology Description, Discussion, and Assessment,

DTIC Science & Technology

1983-12-30

AD-Ri46 57? ARCHITECTURE DESIGN AND SYSTEM; PERFORMANCE ASSESSMENT i/i AND DEVELOPMENT ME..(U) NAVAL SURFACE WEAPONS CENTER SILYER SPRING MD J...AD-A 146 577 NSIWC TR 83-324 ARCHITECTURE , DESIGN , AND SYSTEM; PERFORMANCE ASSESSMENT AND DEVELOPMENT METHODOLOGY...REPORT NUMBER 12. GOVT ACCESSION NO.3. RECIPIENT’S CATALOG NUMBER NSWC TR 83-324 10- 1 1 51’ 4. ?ITLE (and subtitle) ARCHITECTURE , DESIGN , AND SYSTEM; S

Development of a Hospital Information System

DTIC Science & Technology

1984-01-01

4~4and overused statement but true nonrAýheless. Arid, if some- "thing is information fur one and not Cor another, what is it for the latter? It is...scheduling your projects, fantastic! Keep doing itl If you schedule your projects according to a combination of your horoscope , the stock market, and...hospital functions. It is true that knowledge of the tools used in the Systems Development Life Cycle can allow one to go into 4.. any setting and

Relationship Between Internal Load Indicators and Changes on Intermittent Performance After the Preseason in Professional Soccer Players.

PubMed

Campos-Vazquez, Miguel A; Toscano-Bendala, Francisco J; Mora-Ferrera, José C; Suarez-Arrones, Luis J

2017-06-01

The aim of this study was to examine the effects of accumulated internal training load (ITL) during the preseason (4 weeks) on changes in the intermittent performance, in a professional soccer team. Twelve professionals soccer players (Mean ± SD age: 27.7 ± 4.3 years; height: 177.1 ± 6.2 cm; body mass: 73.1 ± 5.2 kg; % body fat [Faulkner]: 10.2 ± 1.2) belonging to a Spanish second division team (2013-2014) participated in this study. The 30-15 intermittent fitness test was performed before and after the preseason, and the speed for the last period completed by each player was recorded (VIFT). During the preseason, the team alternated practice of training sessions (TRNs) with friendly matches (FMs). Session rating of perceived exertion (sRPE), heart rate (HR), and HR reserve were analyzed every TRN and FM to calculate ITL (ITL: sRPE-TL, Edward's-TL and Edward's-TLres). The players' VIFT substantially increased after the preseason period (20.1 ± 0.8 vs. 21.1 ± 0.8 km·h; effect size [ES] = 1.15 ± 0.25; almost certainly). The average value of sRPE throughout FMs was substantially greater than the value of the TRNs (7.4 ± 0.9 vs. 5.25 ± 0.2; ES = 2.31 ± 2.45; almost certainly). sRPE-TL, practice volume, and sum of RPE during the preseason were positively and largely correlated (r = 0.70-0.75) with changes on intermittent performance. No relationships were found between HR-derived measures of exercise load and changes on intermittent fitness. The present results suggest that practice volume and subjective measures of TL, related better than HR-based TL methods to changes on intermittent performance after the preseason, in professional soccer players.

Rhythmic grouping biases constrain infant statistical learning

PubMed Central

Hay, Jessica F.; Saffran, Jenny R.

2012-01-01

Linguistic stress and sequential statistical cues to word boundaries interact during speech segmentation in infancy. However, little is known about how the different acoustic components of stress constrain statistical learning. The current studies were designed to investigate whether intensity and duration each function independently as cues to initial prominence (trochaic-based hypothesis) or whether, as predicted by the Iambic-Trochaic Law (ITL), intensity and duration have characteristic and separable effects on rhythmic grouping (ITL-based hypothesis) in a statistical learning task. Infants were familiarized with an artificial language (Experiments 1 & 3) or a tone stream (Experiment 2) in which there was an alternation in either intensity or duration. In addition to potential acoustic cues, the familiarization sequences also contained statistical cues to word boundaries. In speech (Experiment 1) and non-speech (Experiment 2) conditions, 9-month-old infants demonstrated discrimination patterns consistent with an ITL-based hypothesis: intensity signaled initial prominence and duration signaled final prominence. The results of Experiment 3, in which 6.5-month-old infants were familiarized with the speech streams from Experiment 1, suggest that there is a developmental change in infants’ willingness to treat increased duration as a cue to word offsets in fluent speech. Infants’ perceptual systems interact with linguistic experience to constrain how infants learn from their auditory environment. PMID:23730217

Model Checking Temporal Logic Formulas Using Sticker Automata

PubMed Central

Feng, Changwei; Wu, Huanmei

2017-01-01

As an important complex problem, the temporal logic model checking problem is still far from being fully resolved under the circumstance of DNA computing, especially Computation Tree Logic (CTL), Interval Temporal Logic (ITL), and Projection Temporal Logic (PTL), because there is still a lack of approaches for DNA model checking. To address this challenge, a model checking method is proposed for checking the basic formulas in the above three temporal logic types with DNA molecules. First, one-type single-stranded DNA molecules are employed to encode the Finite State Automaton (FSA) model of the given basic formula so that a sticker automaton is obtained. On the other hand, other single-stranded DNA molecules are employed to encode the given system model so that the input strings of the sticker automaton are obtained. Next, a series of biochemical reactions are conducted between the above two types of single-stranded DNA molecules. It can then be decided whether the system satisfies the formula or not. As a result, we have developed a DNA-based approach for checking all the basic formulas of CTL, ITL, and PTL. The simulated results demonstrate the effectiveness of the new method. PMID:29119114

Session-RPE for quantifying the load of different youth basketball training sessions.

PubMed

Lupo, C; Tessitore, A; Gasperi, L; Gomez, Mar

2017-03-01

The aim of the study was to evaluate youth basketball training, verifying the reliability of the session-RPE method in relation to session duration (< and ≥ 80 minutes) and workout typology (reduced and high warm-up, conditioning, technical, tactical, game portions within a single session) categories. Six male youth basketball players (age, 16.5±0.5 years; height, 195.5±6.75 cm; body mass, 93.9±10.9 kg; and body mass index, 23.6±2.8 kg.m -2 ) were monitored (HR, type and duration of workouts) during 15 (66 individual) training sessions (80±26 minutes). Edwards' HR method was used as a reference measure of internal training load (ITL); the CR-10 RPE scale was administered 30 minutes after the end of each session. The results obtained showed that all comparisons between different session durations and workout portions revealed effects in term of Edwards' ITLs except for warm-up portions. Moderate to strong relationships between Edwards' and session- RPE methods emerged for all sessions (r = .85, P < .001), player's sessions (r range = .79 - .95, P < .001), session durations (< 80 minutes: r = .67, P < .001; ≥ 80 minutes: r = .75, P < .001), and workout portions (r range = .78 - .89, P range = .002 - < .001). The findings indicated that coaches of youth basketball players can successfully use session-RPE to monitor the ITL, regardless of session durations and workout portions.

A Systematic Approach for Determining Vertical Pile Depth of Embedment in Cohensionless Soils to Withstand Lateral Barge Train Impact Loads

DTIC Science & Technology

2017-01-30

dynamic structural time- history response analysis of flexible approach walls founded on clustered pile groups using Impact_Deck. In Preparation, ERDC...research (Ebeling et al. 2012) has developed simplified analysis procedures for flexible approach wall systems founded on clustered groups of vertical...history response analysis of flexible approach walls founded on clustered pile groups using Impact_Deck. In Preparation, ERDC/ITL TR-16-X. Vicksburg, MS

International Armaments Cooperation: A Case Study of the Modular Standoff Weapons

DTIC Science & Technology

1988-09-01

members of the Alliance will be in a better position to deal with the problems of removing trade barriers within NATO as a whole in order to create a...costs and responsibll - itles for any or all of the following by two or more nations or organizations: research, development, production, and follow-on...significant barriers remain. As a result of the lack of a coordinated defense posture and the numerical and qualitative gains made by the Warsaw Pact

Work week duration, work-family balance and difficulties encountered by female and male physicians: results from the French SESMAT study.

PubMed

Estryn-Behar, M; Fry, C; Guetarni, K; Aune, I; Machet, G; Doppia, M A; Lassaunière, J M; Muster, D; Pelloux, P; Prudhomme, Ch

2011-01-01

France encounters difficulties attracting physicians to work in hospitals. Organisation at work and at home may be at the heart of the problem for female as well as for male physicians. A comprehensive questionnaire was filled out online by a representative sample of 1924 French hospital physicians. We conducted gender bivariate and multivariate analysis of the risk factors for burnout and intent to leave the profession(ITL). ITL was declared by 17.4% of physicians. According to 41.3% of female physicians (FP), their profession was an obstacle to having children (versus 19.3% for male physicians (MP)). Major factors linked with burnout were Effort/Reward imbalance (FP adjOR = 5.09, MP adjOR = 5.93), Work-family conflicts (FP adjOR = 2.97, MP adjOR = 3.04), and Low quality of teamwork (FP adjOR = 1.82, MP adjOR = 2.68). Major factors linked with ITL were Low quality of teamwork (FP adjOR = 4.49, MP adjOR = 3.03), Patient-related burnout (FP adjOR = 2.10, MP adjOR = 2.35) and General burnout (FP adjOR = 1.85, MP adjOR = 1.45). Excessive job demands are linked with burnout and with work-family conflicts, conducting to difficulties in organising one's life in order to have and raise children. Potential solutions include facilitating teamwork in order to reduce departure, which increase workload on those who stay increasing their work family conflict.

Liver lipid composition and intravenous, intraperitoneal, and enteral administration of intralipid.

PubMed

Morán Penco, J M; Maciá Botejara, E; Salas Martinez, J; Mahedero Ruiz, G; Climent Mata, V; Saenz de Santamaria, J; Vinagre Velasco, L M

1994-01-01

We studied the variations arising in plasma and liver lipids after intravenous (i.v.), intraperitoneal (IP), and intragastric (IG) administration of a fat overdose on the order of 4 g.kg-1 body wt.day-1 in the form of Intralipid (ITL) 20% to 33 New Zealand rabbits for 15 days. The control group was submitted for surgery but did not receive an ITL supplement. The results show weight gain in all animals and normal liver enzyme values. There was an increase in plasma lipids in groups supplemented by the parenteral route (i.v. and IP), and fatty acids showed a similar distribution, in terms of percentages, to that for ITL. In liver tissue, there was an increase in the fractions related to ethanolamine and a decrease in phospholipids of choline and serine. In the i.v. group, neutral lipids predominated compared with other groups. The livers of all supplemented animals (i.v., IP, and IG) showed a higher content of stearic and linoleic acid and a reduction in oleic acid. Study with optical microscopy showed a microvacuolization affecting the three areas of the hepatic acini in the i.v. group, seen with electron microscopy as vacuoles lacking membranes and surrounded by mitochondria. In conclusion, there is an increase in hepatic steatosis in parenteral groups and a greater deposit of neutral lipids in the i.v. group, related to the administration route, without biochemical signs of liver dysfunction.

Descriptive Summaries of the Research, Development, Test and Evaluation, Army Appropriaion FY 1978. Supporting Data FY 1978, Budget Estimate Submitted to Congress January 1977. Volume I

DTIC Science & Technology

1977-01-01

aCca oi c o. 4) T3 a 3 a a IH o x a a a h o w a oi ■o ,* <o 0) 3 a eflpiHa-oooa...8217*’^ A^iimmn»Lißirmmmmmitn. » [m< «^n^ ffm ^^nmmmmm^^ 11 HI I 3 a s a. < El 3 f < o 91 9 u o G Ü v o c I •a 0 g > 5 o 00 01...o • in i K ON K i 00 ON ITl 00 n I i I ■ MM - I i)ii|ii, npH.i.t -’«"•W’-J.’H..I«II i wj inn« \\ ffm «.jpiLiMii in

A Review of AA Psych Corps Involvement in the Allocation of Soldiers to corps and Employment. Executive Summary

DTIC Science & Technology

1990-11-01

Compiled I Lecture Additional Iation/ _____ Testing L J week 2 week 3- 4 week 5 wee 6 week 8 -9 week 10 wee: Allocation Guide: Shows suitability -:r - n cl...the Document box only (Document) la. A R Number lb. Establishment Number 2. Document Date AR-006-388 PSRU RR 4 /90 NOVEMBER 1990 UNCLASSIFIED 3. Title 4 ...of 7 Number of EMI4IIJYM [itl Pages References Title 17 15 8 . Author(s) 9. Downgrading or Delimiting Instructions LTCOL R.C. FURRY I Oa. Corporate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mendes, J.; Bessa, R.J.; Keko, H.

Wind power forecasting (WPF) provides important inputs to power system operators and electricity market participants. It is therefore not surprising that WPF has attracted increasing interest within the electric power industry. In this report, we document our research on improving statistical WPF algorithms for point, uncertainty, and ramp forecasting. Below, we provide a brief introduction to the research presented in the following chapters. For a detailed overview of the state-of-the-art in wind power forecasting, we refer to [1]. Our related work on the application of WPF in operational decisions is documented in [2]. Point forecasts of wind power are highlymore » dependent on the training criteria used in the statistical algorithms that are used to convert weather forecasts and observational data to a power forecast. In Chapter 2, we explore the application of information theoretic learning (ITL) as opposed to the classical minimum square error (MSE) criterion for point forecasting. In contrast to the MSE criterion, ITL criteria do not assume a Gaussian distribution of the forecasting errors. We investigate to what extent ITL criteria yield better results. In addition, we analyze time-adaptive training algorithms and how they enable WPF algorithms to cope with non-stationary data and, thus, to adapt to new situations without requiring additional offline training of the model. We test the new point forecasting algorithms on two wind farms located in the U.S. Midwest. Although there have been advancements in deterministic WPF, a single-valued forecast cannot provide information on the dispersion of observations around the predicted value. We argue that it is essential to generate, together with (or as an alternative to) point forecasts, a representation of the wind power uncertainty. Wind power uncertainty representation can take the form of probabilistic forecasts (e.g., probability density function, quantiles), risk indices (e.g., prediction risk index) or scenarios (with spatial and/or temporal dependence). Statistical approaches to uncertainty forecasting basically consist of estimating the uncertainty based on observed forecasting errors. Quantile regression (QR) is currently a commonly used approach in uncertainty forecasting. In Chapter 3, we propose new statistical approaches to the uncertainty estimation problem by employing kernel density forecast (KDF) methods. We use two estimators in both offline and time-adaptive modes, namely, the Nadaraya-Watson (NW) and Quantilecopula (QC) estimators. We conduct detailed tests of the new approaches using QR as a benchmark. One of the major issues in wind power generation are sudden and large changes of wind power output over a short period of time, namely ramping events. In Chapter 4, we perform a comparative study of existing definitions and methodologies for ramp forecasting. We also introduce a new probabilistic method for ramp event detection. The method starts with a stochastic algorithm that generates wind power scenarios, which are passed through a high-pass filter for ramp detection and estimation of the likelihood of ramp events to happen. The report is organized as follows: Chapter 2 presents the results of the application of ITL training criteria to deterministic WPF; Chapter 3 reports the study on probabilistic WPF, including new contributions to wind power uncertainty forecasting; Chapter 4 presents a new method to predict and visualize ramp events, comparing it with state-of-the-art methodologies; Chapter 5 briefly summarizes the main findings and contributions of this report.« less

Isothermal thermoluminescence dating of K-feldspar from sediments to determine fault slip rates: development and assessment

NASA Astrophysics Data System (ADS)

Rhodes, E. J.; Roder, B. J.; Lawson, M. J.; Dolan, J. F.; McGill, S. F.; McAuliffe, L.

2012-04-01

Faults in California accommodate most of the relative motion between the Pacific and North American tectonic plates, along either one main strike-slip fault, - the San Andreas fault - or a network of sub-parallel faults (e.g., the San Jacinto, Elsinore and San Andreas faults). Slip is also accommodated along many other associated faults and folds, and the region suffers frequent damaging earthquakes. Contemporary movements of different fault-bounded blocks are relatively well established on decadal timescales using remote sensing and GPS, and on timescales of 106 to 107 years, by dating offset geologic features with radiometric methods. However, on timescales of decades to several hundred thousand years, determining total fault offset and mean slip rate is harder. Critical questions for understanding fault dynamics and improving earthquake risk assessment include the degree to which slip is clustered into episodes of more rapid movement, and how slip is accommodated by different sub-parallel faults. In many cases, streams with offset courses can be recognised, and in some cases offset terrace surfaces can be located, especially when using LiDAR data to complement field mapping. Radiocarbon and terrestrial cosmogenic nuclides have been used to date these features, but both have limitations of age range, sample suitability and availability. OSL (optically stimulated luminescence) and IRSL (infra-red stimulated luminescence) have great potential to complement these techniques, though the characteristics of quartz in some parts of southern California are suboptimal, displaying low sensitivity and other limitations. In order to overcome these limitations encountered using quartz OSL, we are developing a new geochronometer based on the isothermal thermoluminescence (ITL) signal of K feldspar measured at 250°C. Preliminary ITL age estimates from the paleoseismic site of El Paso Peaks on the Central Garlock fault in the Mojave Desert, California, agree well with a well-established radiocarbon chronology based on 29 samples spanning the last 7,000 years (Dawson et al., 2003). We examine the basis of this new ITL approach and assess its potential for application within California and beyond. Reference cited Dawson, T.E., McGill, S.F. and Rockwell, T.K. 2003 Irregular recurrence of paleoearthquakes along the central Garlock fault near El Paso peaks, California. Journal of Geophysical Research 108, No. B7, 2356, doi:10.1029/2001JB001744.

A Novel RNA Editing Sensor Tool and a Specific Agonist Determine Neuronal Protein Expression of RNA-Edited Glycine Receptors and Identify a Genomic APOBEC1 Dimorphism as a New Genetic Risk Factor of Epilepsy

PubMed Central

Kankowski, Svenja; Förstera, Benjamin; Winkelmann, Aline; Knauff, Pina; Wanker, Erich E.; You, Xintian A.; Semtner, Marcus; Hetsch, Florian; Meier, Jochen C.

2018-01-01

C-to-U RNA editing of glycine receptors (GlyR) can play an important role in disease progression of temporal lobe epilepsy (TLE) as it may contribute in a neuron type-specific way to neuropsychiatric symptoms of the disease. It is therefore necessary to develop tools that allow identification of neuron types that express RNA-edited GlyR protein. In this study, we identify NH4 as agonist of C-to-U RNA edited GlyRs. Furthermore, we generated a new molecular C-to-U RNA editing sensor tool that detects Apobec-1- dependent RNA editing in HEPG2 cells and rat primary hippocampal neurons. Using this sensor combined with NH4 application, we were able to identify C-to-U RNA editing-competent neurons and expression of C-to-U RNA-edited GlyR protein in neurons. Bioinformatic analysis of 1,000 Genome Project Phase 3 allele frequencies coding for human Apobec-1 80M and 80I variants showed differences between populations, and the results revealed a preference of the 80I variant to generate RNA-edited GlyR protein. Finally, we established a new PCR-based restriction fragment length polymorphism (RFLP) approach to profile mRNA expression with regard to the genetic APOBEC1 dimorphism of patients with intractable temporal lobe epilepsy (iTLE) and found that the patients fall into two groups. Patients with expression of the Apobec-1 80I variant mostly suffered from simple or complex partial seizures, whereas patients with 80M expression exhibited secondarily generalized seizure activity. Thus, our method allows the characterization of Apobec-1 80M and 80l variants in the brain and provides a new way to epidemiologically and semiologically classify iTLE according to the two different APOBEC1 alleles. Together, these results demonstrate Apobec-1-dependent expression of RNA-edited GlyR protein in neurons and identify the APOBEC1 80I/M-coding alleles as new genetic risk factors for iTLE patients. PMID:29375302

Emergency physicians accumulate more stress factors than other physicians-results from the French SESMAT study.

PubMed

Estryn-Behar, M; Doppia, M-A; Guetarni, K; Fry, C; Machet, G; Pelloux, P; Aune, I; Muster, D; Lassaunière, J-M; Prudhomme, C

2011-05-01

France is facing a shortage of available physicians due to a greying population and the lack of a proportional increase in the formation of doctors. Emergency physicians are the medical system's first line of defence. The authors prepared a comprehensive questionnaire using established scales measuring various aspects of working conditions, satisfaction and health of salaried physicians and pharmacists. It was made available online, and the two major associations of emergency physicians promoted its use. 3196 physicians filled out the questionnaire. Among them were 538 emergency physicians. To avoid bias, 1924 physicians were randomly selected from the total database to match the demographic characteristics of France's physician population: 42.5% women, 57.5% men, 8.2% < 35 years old, 33.8% 35-44 years old, 34.5% 45-54 years old and 23.6% ≥ 55 years old. The distribution of physicians in the 23 administrative regions and by speciality was also precisely taken into account. This representative sample was used to compare subgroups of physicians by speciality. The outcomes indicate that the intent to leave the profession (ITL) was quite prevalent across French physicians and even more so among emergency physicians (17.4% and 21.4% respectively), and burnout was highly prevalent (42.4% and 51.5%, respectively). Among the representative sample and among emergency physicians, work-family conflict (OR=4.47 and OR=6.14, respectively) and quality of teamwork (OR=2.21 and OR=5.44, respectively) were associated with burnout in a multivariate analysis, and these risk factors were more prevalent among emergency physicians than other types. A serious lack of quality of teamwork appears to be associated with a higher risk of ITL (OR=3.92 among the physicians in the representative sample and OR=4.35 among emergency physicians), and burnout doubled the risk of ITL in multivariate analysis. In order to prevent the premature departure of French doctors, it is important to improve work-family balance, working processes through collaboration, multidisciplinary teamwork and to develop team training approaches and ward design to facilitate teamwork.

Towards Development of Innovative Bio-Inspired Materials by Analyzing the Hydrodynamic Properties of Polyondon Spathula (Paddlefish) Rostrum

DTIC Science & Technology

2013-09-01

Factors Multiply By To Obtain cubic inches 1.6387064 E -05 cubic meters inches 0.0254 meters pounds (force) 4.448222 newtons pounds (force) per...0.45359237 kilograms pounds (mass) per cubic foot 16.01846 kilograms per cubic meter pounds (mass) per cubic inch 2.757990 E +04 kilograms per cubic...14.59390 kilograms square inches 6.4516 E -04 square meters ERDC/ITL TR-13-4 1 1 Introduction 1.1 Bio–inspiration Nature has evolved from a

Multilevel Examination of Job Satisfaction and Career Intentions of Collegiate Athletic Trainers: A Quantitative Approach.

PubMed

Eason, Christianne M; Mazerolle, Stephanie M; Denegar, Craig R; Pitney, William A; McGarry, Jennifer

2018-01-01

  Recent employment data from collegiate athletic training settings have demonstrated departure trends among men and women. These trends have been hypothesized to be related to work-life balance. However, work-life balance is only 1 aspect of a myriad of factors. Due to the complex nature of the work-life interface, a multilevel examination is needed to better understand the precipitators of departure.   To quantitatively examine factors that may influence collegiate athletic trainers' (ATs') job satisfaction and career intentions via a multilevel examination of the work-life interface.   Cross-sectional study.   Web-based questionnaire.   Athletic trainers employed in National Collegiate Athletic Association Division I, II, or III or National Association of Intercollegiate Athletics colleges or universities (N = 299: 56.5% female, 43.5% male). The average age of participants was 33.6 ± 8.3 years, and their average experience was 10.3 ± 7.6 years.   Participants responded to an online questionnaire consisting of demographic questions, 9 Likert-scale surveys, and open-ended questions. Job-satisfaction Scores (JSSs) and intention-to-leave scores (ITLSs) served as the dependent variables and factors from individual, organizational, and sociocultural levels were the independent variables. Hierarchical regression analysis was run to determine the predictability of factors.   No sex differences in ITLS or JSS were found in our sample. Independent variables explained 68.5% of the variance in JSS and 28.8% of the variance in ITLS. Additions of factor levels increased the percentage of explained variance in both scores.   A combination of individual-, organizational-, and sociocultural-level factors was able to best predict JSS and ITLS among collegiate ATs.

A Premiere example of the illusion of harm reduction cigarettes in the 1990s.

PubMed

Pollay, R W; Dewhirst, T

2003-09-01

To use the product launch of Player's Premiere as a case study for understanding the new cigarette product development process during the 1990s. We determine the (in)validity of industry claims that: (1) development of the physical product preceded the promotional promise of "less irritation"; (2) "less irritation" was actually realised; (3) advertising informed consumers; and (4) advertising regulations caused the product's failure in the marketplace. Court proceedings assessing the constitutionality of Canada's Tobacco Act, which substantially restricts cigarette advertising. The 2002 Quebec Superior Court trial yielded a new collection of internal documents from Imperial Tobacco Ltd (ITL), including several about the development and marketing of Player's Premiere. Trial testimony and corporate documents were reviewed to determine the validity of the industry representations about the new cigarette product development process, focusing on the case history of Player's Premiere. In direct contradiction to industry testimony, the documentary evidence demonstrates that (1) communications for Player's Premiere, which claimed less irritation, were developed long before finding a product that could deliver on the promise; (2) ITL did not sell a "less irritating" product that matched its promotional promise; (3) the advertising and other communications for Player's Premiere were extensive, relying on the hi-tech appearances ("tangible credibility") of a "unique" filter, yet were uninformative and vague; and (4) Player's Premiere failed in the marketplace, despite extensive advertising and retail support, because it was an inferior product that did not live up to its promotional promise, not because of regulation of commercial speech. New product development entails extensive consumer research to craft all communications tools in fine detail. In the case of Player's Premiere, this crafting created a false and misleading impression of technological advances producing a "less irritating" cigarette. This product was solely a massive marketing ploy with neither consumer benefits, nor public health benefits. The industry attempted to deceive both consumers and the court.

A Premiere example of the illusion of harm reduction cigarettes in the 1990s

PubMed Central

Pollay, R; Dewhirst, T

2003-01-01

Objective: To use the product launch of Player's Premiere as a case study for understanding the new cigarette product development process during the 1990s. We determine the (in)validity of industry claims that: (1) development of the physical product preceded the promotional promise of "less irritation"; (2) "less irritation" was actually realised; (3) advertising informed consumers; and (4) advertising regulations caused the product's failure in the marketplace. Setting: Court proceedings assessing the constitutionality of Canada's Tobacco Act, which substantially restricts cigarette advertising. The 2002 Quebec Superior Court trial yielded a new collection of internal documents from Imperial Tobacco Ltd (ITL), including several about the development and marketing of Player's Premiere. Method: Trial testimony and corporate documents were reviewed to determine the validity of the industry representations about the new cigarette product development process, focusing on the case history of Player's Premiere. Results: In direct contradiction to industry testimony, the documentary evidence demonstrates that (1) communications for Player's Premiere, which claimed less irritation, were developed long before finding a product that could deliver on the promise; (2) ITL did not sell a "less irritating" product that matched its promotional promise; (3) the advertising and other communications for Player's Premiere were extensive, relying on the hi-tech appearances ("tangible credibility") of a "unique" filter, yet were uninformative and vague; and (4) Player's Premiere failed in the marketplace, despite extensive advertising and retail support, because it was an inferior product that did not live up to its promotional promise, not because of regulation of commercial speech. Conclusions: New product development entails extensive consumer research to craft all communications tools in fine detail. In the case of Player's Premiere, this crafting created a false and misleading impression of technological advances producing a "less irritating" cigarette. This product was solely a massive marketing ploy with neither consumer benefits, nor public health benefits. The industry attempted to deceive both consumers and the court. PMID:12958396

77 FR 64314 - National Cybersecurity Center of Excellence (NCCoE)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-19

... Technology (NIST) Information Technology Laboratory (ITL) invites interested U.S. companies to submit letters... http://csrc.nist.gov/nccoe . SUPPLEMENTARY INFORMATION: The NCCoE, hosted by NIST, is a public- private... Information Technology (IT) systems. By accelerating dissemination and use of these integrated tools and...

U.S. EPA, Pesticide Product Label, B-NINE SP, 10/17/1973

EPA Pesticide Factsheets

2011-04-14

l APPLICATION NOTES , I _·t .tdel dddd.tl'ldl "'\\I'UlrHI :1/"'11 " ~ ... I': 1I1~~P(! I( .tt.,.., 1 f !IHJI' dt·~ " ,I 'I"tl "f It ... I\\:I· .... I,IV rt·~,Jll. Ht···: tt· .... ...

Screening Study on Feasibility of Standards of Performance ...

EPA Pesticide Factsheets

... VII ittttl w.xi Itl lln-.virc li .-illy Im 61,1, | ell to I III' ptl.rv'NS wt'l^lil | I linll.1l I"lis il|'|>l I- ^O f.'thl*' I,i fi,,,-l, M M.tir,-.-: ... 3 Industrial Factors K. Factor K is the ...

76 FR 22106 - Ocean Transportation Intermediary License Revocation

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-20

...: Failed to maintain a valid bond. License Number: 018088N. Name: ILS-International Logistics Solutions... maintain a valid bond. License Number: 019369N. Name: Independent Transport Line, LLC dba ITL. Address... bond. License Number: 022322N. Name: O.T.S. Logistics, Inc. Address: 18726 South Western Avenue, Suite...

75 FR 72824 - Ocean Transportation Intermediary License Applicants

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-26

... & OFF License. Everglory Logistics, Inc. (NVO & OFF), 440 McClellan Highway, 105F2, East Boston, MA... & Logistics (ITL) USA Inc. (NVO & OFF), 1200 Route 22 East, Suite 2000, Bridgewater, NJ 08807, Officers: Sunil... NVO License. Kinetix International Logistics, LLC (NVO & OFF), 5400 Shawnee Road, 105, Alexandria, VA...

Evaluation of Lubrication Systems for Isothermal Forging of Alpha-Beta and Beta Titanium Alloys.

DTIC Science & Technology

1977-11-01

in u i u , ’ F~~~U BEVCSR E CC’W11F.TJNG PORNI ~\\ ~ - I~JI~*lNUllS1IIl a, AccI$$IOM N ICIPIENT - ~~~~~~~~~ I _ _ _( 4 T ITL E (~~~ AOlIU ~J

Environmental Hazard Assessment of One and Two Carbon ...

EPA Pesticide Factsheets

... it'l i:i />tu-r A.'iplivxlii Mi'" (Ur.-llh/nilllJ 'f.:\\ AV lilnik Wl ... 114 ' '.'.5 i, II -m IH.O ', \\ -t'lO i,.', . 1-4! 1 1. 5 (, !H ' 4.<» 3b • !.« 47 .'i.7. 2« • n.'J l':hnni,.'s in llf ...

U.S. EPA, Pesticide Product Label, , 09/26/1996

EPA Pesticide Factsheets

2011-04-21

... '" I ,1· ~ ,,, 0'1'" ).J" !I"'I ""'( ~ 1'1 I' .. f ,'-" " I ,1!"I,t'l1I,J ,;1",,.· nl.1,.,. I·" f'\\Jp,',hitt 11'1 f"i f"l'" "r II"pr'<;'!I'111"ni ·.r ~'. ,. t" It, ·""j"l ,.': I '" "1,1",, I,."" ...

National Collegiate Athletic Association Division and Primary Job Title of Athletic Trainers and Their Job Satisfaction or Intention to Leave Athletic Training

PubMed Central

Terranova, Aaron B.; Henning, Jolene M.

2011-01-01

Context: Membership in the National Athletic Trainers' Association (NATA) has declined in recent years, generating much debate about professional commitment. Objective: To compare the contributing factors of job satisfaction and intention to leave athletic training of certified athletic trainers (ATs) employed in National Collegiate Athletic Association (NCAA) institutions. Design: Cross-sectional study. Setting: A link to a Web-based questionnaire containing the Spector Job Satisfaction Survey (JSS) and an original Intention to Leave Survey (ITLS) was distributed by e-mail to 1003 certified members of the National Athletic Trainers' Association. Patients or Other Participants: A total of 191 certified members of the NATA employed in a college or university setting in a primarily clinical capacity; representing all NCAA divisions; and having the job title of head athletic trainer, associate/assistant athletic trainer, or graduate assistant/intern athletic trainer. Main Outcome Measure(s): We used separate 3 × 3 factorial analyses of variance to compare the mean scores of each JSS subscale and of the ITLS with NCAA division and job title. A stepwise multiple regression was used to determine the strength of the relationships between the JSS subscales and the ITLS. Results: We found differences for job title in the subscales of Fringe Benefits (F2,182 = 7.82, P = .001) and Operating Conditions (F2,182 = 12.01, P < .001). The JSS subscale Nature of Work was the greatest indicator of intention to leave (β = −0.45). Conclusions: We found a strong negative correlation between various facets of job satisfaction and intention to leave athletic training. The NCAA division seemed to have no effect on an individual's job satisfaction or intention to leave the profession. In addition, only Fringe Benefits and Operating Conditions seemed to be affected by job title. The ATs had similar levels of job satisfaction regardless of NCAA division, and their job titles were not a major factor in job satisfaction. PMID:21669102

Detection of Intermediate Mediterranean Waters in the Atlantic Ocean by ARGO Floats Data

NASA Astrophysics Data System (ADS)

Filyushkin, B. N.; Lebedev, K. V.; Kozhelupova, N. G.

2017-11-01

Peculiarities of the spatial distribution of intermediate Mediterranean waters (MW), which are the main source to maintain the heat and salt budgets at depths of 600-1500 m in the Atlantic Ocean, have been studied using the ARGO floats measurements database. About 75000 temperature and salinity profiles recorded by 900 ARGO floats in 2005-2014 in the Atlantic Ocean for latitudes from 20° to 50° N were used. To process these data, we used the ARGO-Based Model for Investigation of the Global Ocean (AMIGO). This technique allowed us for the first time to obtain a complete set of oceanographic characteristics up to a depth of 2000 m for different time averaging intervals (month, season, years). Joint analysis of the temperature, salinity, and velocity distributions at 700-1000 m depths made it possible to revise the distribution of MW and their penetration into the western part of the ocean across the Mid-Atlantic Ridge (MAR). It is shown that at depths of 700 and 1000 m, the Mid-Atlantic Ridge is a barrier to advective propagation of salty waters (>35.5 PSU) to the west and is transparent to fragments of destroyed intrathermocline lenses (ITL) with lower salinity (<35.4 PSU). In the Atlantic region, from 20° to 35° N and from 30° to 70° W, individual lens profiles with an anomalous salinity distribution were sought using ARGO measurements to detect ITL and its separate fragments. About 24 000 measurements from 370 ARGO floats were analyzed, and only about 3% of them showed weak salinity anomalies at 800-1200 m depths. No ITL were found from these observations. Analysis of long-term drifting of individual floats recording temperature and salinity profiles with anomalous layers made it possible to study the nature of MW transport through the MAR.

U.S. EPA, Pesticide Product Label, RED TORPEDO USE-AS-IS RAT KILLER, 12/14/1967

EPA Pesticide Factsheets

2011-04-21

... ".dh('t'p an \\,lill\\(,ITlllJ'tt'd ,1Ippl~ of 11:111 1'11' nl.; at It'.I;t II) Ii:l\\';, fll) mil" ;\\1 it-:l"\\ 1:) '1:1:,', If kli~ I)('crill\\l'-; >(ur. m()ld~' 't!' Ot!kr\\":l'-jlOI;Cd, it .. ...

Nakeyah Ji Noshchi i (Trees on Our Reservation). A Bilingual Reader.

ERIC Educational Resources Information Center

Vicenti, Arnold; And Others

Written in Apache and English, this illustrated bilingual reader contains brief descriptions of 10 trees found on the Jicarilla reservation. Each description tells where the tree is found on the reservation and what the Jicarillas use it for. Trees described are the: cottonwood (t'oos), oak (choshch'itl'i), juniper (gah), aspen (it'aa), pinon…

U.S. EPA, Pesticide Product Label, DIAZINON AG 500 EMULSIFIABLE CONCENTRATE, 01/29/1975

EPA Pesticide Factsheets

2011-04-21

... II aflp "t!:'\\: o! DIH/lllll/! A(i:lUO ,I'Op~ ;1 .... a ~pra~· III ,I 1I .. 1Il!!lurn 01 .! ~8b 01 water Pt:1 serf' o! 10 ~.Il .... ,I! \\\\,I't'r pt'r h,lt· It'l ).':oul!d appl1('stIOll:-'. ...

8-Bit Gray Scale Images of Fingerprint Image Groups

National Institute of Standards and Technology Data Gateway

NIST 8-Bit Gray Scale Images of Fingerprint Image Groups (Web, free access)   The NIST database of fingerprint images contains 2000 8-bit gray scale fingerprint image pairs. A newer version of the compression/decompression software on the CDROM can be found at the website http://www.nist.gov/itl/iad/ig/nigos.cfm as part of the NBIS package.

Energy Input to the Auroral Ionosphere.

DTIC Science & Technology

1980-02-29

I s ionl ratev we (’tin-i Is too high; litl v lu, it woold kieep Ev itit t he ra tige of rl 40 tiV/ hi. :v.Itl!; et atl. 1 1911 1 anld (it la iI...to 170-km altitude. The Hall conductivity (solid line) is nearly always greater than the Pederson conductivity (dashed line). Fig. 6b. Calculated

Effect of air temperature and humidity on ingestive behaviour of sheep

NASA Astrophysics Data System (ADS)

Paranhos da Costa, Mateus J. R.; da Silva, Roberto Gomes; de Souza, Roberto Carlos

1992-12-01

Thirty-two Polwarth ewes, of ages up to 1 year, were observed in a climatic chamber (24 to 45° C) for eight periods of 5 h each. The observations were made through a window in the chamber wall. All animals were observed four times, then shorn and observed four times again. The animals were given weighed quantities of water and feed consisting of commercial concentrate plus Rhodes grass ( Chloris gayana) hay. The water and feed remaining after 5 h of observation were weighed. The following traits were analysed: time eating hay (TEH), time eating concentrate (TEC), time drinking water (TDW), weight of hay eaten (WHE), weight of concentrate eaten (WCE), volume of ingested water (VIW), ruminating time standing up (RTS), ruminating time lying down (RTL), idling time standing up (ITS), and idling time lying down (ITL). Shearing had a significant effect for all traits except ITS. Shearing resulted in higher values for all traits except for ITS and ITL. Ingestion of hay (TEH and WHE) decreased with increased air temperature and humidity, while the ingestion of concentrate (TEC) and WHE) and water (TDW and VIW) increased. Rumination decreased with increased air temperature and humidity, and was higher in shorn than in unshorn sheep.

Thermo Scientific Sulfur Dioxide Analyzer Instrument Handbook

DOE Office of Scientific and Technical Information (OSTI.GOV)

Springston, S. R.

The Sulfur Dioxide Analyzer measures sulfur dioxide based on absorbance of UV light at one wavelength by SO2 molecules which then decay to a lower energy state by emitting UV light at a longer wavelength. Specifically, SO2 + hυ1 →SO2 *→SO2 + hυ2 The emitted light is proportional to the concentration of SO2 in the optical cell. External communication with the analyzer is available through an Ethernet port configured through the instrument network of the AOS systems. The Model 43i-TLE is part of the i-series of Thermo Scientific instruments. The i-series instruments are designed to interface with external computers throughmore » the proprietary Thermo Scientific iPort Software. However, this software is somewhat cumbersome and inflexible. BNL has written an interface program in National Instruments LabView that both controls the Model 43i-TLE Analyzer AND queries the unit for all measurement and housekeeping data. The LabView vi (the software program written by BNL) ingests all raw data from the instrument and outputs raw data files in a uniform data format similar to other instruments in the AOS and described more fully in Section 6.0 below.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Springston, Stephen R.

The Sulfur Dioxide Analyzer measures sulfur dioxide based on absorbance of UV light at one wavelength by SO 2 molecules which then decay to a lower energy state by emitting UV light at a longer wavelength. Specifically, SO 2 + hυ1 →SO 2 *→SO 2 + hυ2 The emitted light is proportional to the concentration of SO 2 in the optical cell. External communication with the analyzer is available through an Ethernet port configured through the instrument network of the AOS systems. The Model 43i-TLE is part of the i-series of Thermo Scientific instruments. The i-series instruments are designed tomore » interface with external computers through the proprietary Thermo Scientific iPort Software. However, this software is somewhat cumbersome and inflexible. Brookhaven National Laboratory (BNL) has written an interface program in National Instruments LabView that both controls the Model 43i-TLE Analyzer AND queries the unit for all measurement and housekeeping data. The LabView vi (the software program written by BNL) ingests all raw data from the instrument and outputs raw data files in a uniform data format similar to other instruments in the AOS and described more fully in Section 6.0 below.« less

Defense Small Business Innovation Research Program (SBIR). Abstracts of Phase 2 Awards 1992

DTIC Science & Technology

1992-01-01

tV:iiisatuir packace. and 12 MNI IC itiphefilInciaiiti itl o threebitdpstier lAP RI .Sl:ARCI I INC I-opte#.1ý" M 1 )25 II0& X144RI Ali! 27()3 (U lAIR ...achieve high gain in a refraction - or nonuniformity -compensated, twin-target system, and construct a portable x-ray laser engineering prototype. This

The Impact of Bundled High Performance Human Resource Practices on Intention to Leave: Mediating Role of Emotional Exhaustion

ERIC Educational Resources Information Center

Jyoti, Jeevan; Rani, Roomi; Gandotra, Rupali

2015-01-01

Purpose: The purpose of this paper is to examine the mediating effect of emotional exhaustion (EE) in between bundled high-performance human resource practices (HPHRPs) and intention to leave (ITL) in the education sector. Design/methodology/approach: A survey questionnaire method was used to collect data from a sample of 514 teachers working in…

Building Information Modeling (BIM) Primer. Report 1: Facility Life-Cycle Process and Technology Innovation

DTIC Science & Technology

2012-08-01

Building Information Modeling ( BIM ) Primer Report 1: Facility Life-cycle Process and Technology Innovation In fo...is unlimited. ERDC/ITL TR-12-2 August 2012 Building Information Modeling ( BIM ) Primer Report 1: Facility Life-cycle Process and Technology...and to enhance the quality of projects through the design, construction, and handover phases. Building Information Modeling ( BIM ) is a

Comparison of intratesticular lidocaine, sacrococcygeal epidural lidocaine and intravenous methadone in cats undergoing castration: a prospective, randomized, investigator-blind clinical trial.

PubMed

Fernandez-Parra, Rocio; Zilberstein, Luca; Fontaine, Cyril; Adami, Chiara

2017-03-01

The objective of this study was to compare three analgesic protocols for feline castration. Prospective, randomized clinical study. Forty-nine client-owned cats. Cats were injected with intramuscular (IM) dexmedetomidine (15 μg kg -1 ) and alfaxalone (3 mg kg -1 ) and assigned randomly to one of three treatment groups. Group ITL (n = 15) were administered intratesticular 2% lidocaine (0.05 mL each testicle), group SCL (n = 15) a sacrococcygeal epidural injection of 2% lidocaine (0.1 mL kg -1 ) and group IVM (n = 19) intravenous (IV) methadone (0.3 mg kg -1 ), before surgery. Cardiorespiratory variables were recorded. In case of autonomic nociceptive response, IV fentanyl (2 μg kg -1 ) was administered. During recovery, time from IM atipamezole (75 μg kg -1 , administered at the end of surgery) to sternal recumbency and to active interaction was recorded. Quality of recovery was assessed using a simple descriptive scale. Postoperative analgesia was evaluated using a visual analogue scale and the UNESP-Botucatu multidimensional composite pain scale (MCPS) at return of active interaction and then 1, 2 and 3 hours later. The three analgesic protocols were comparable in terms of intraoperative fentanyl and propofol requirement. Cardiorespiratory variables stayed within normal ranges in the majority of the cases, although group IVM had the lowest intraoperative respiratory rate (p = 0.0009). No differences were detected between groups in UNESP-Botucatu MCPS scores (p = 0.21). However, group ITL showed higher visual analogue scale score than group IVM (p = 0.001). Four cats enrolled in group ITL, as well as three of group SCL and one of group IVM, required rescue analgesics before the completion of pain assessment. Intratesticular and sacrococcygeal epidural lidocaine injections could be regarded as good alternatives to systemic opioids in cats undergoing castration, although the benefits of these techniques seem to be of shorter duration than IV methadone. Copyright © 2017 Association of Veterinary Anaesthetists and American College of Veterinary Anesthesia and Analgesia. All rights reserved.

Career plans of primary care midwives in the Netherlands and their intentions to leave the current job.

PubMed

Warmelink, J Catja; Wiegers, Therese A; de Cock, T Paul; Spelten, Evelien R; Hutton, Eileen K

2015-05-10

In labour market policy and planning, it is important to understand the motivations of people to continue in their current job or to seek other employment. Over the last decade, besides the increasingly medical approach to pregnancy and childbirth and decreasing home births, there were additional dramatic changes and pressures on primary care midwives and midwifery care. Therefore, it is important to re-evaluate the career plans of primary care midwives and their intentions to leave their current job. All 108 primary care midwives of 20 selected midwifery care practices in the Netherlands were invited to fill out a written questionnaire with questions regarding career plans and intentions to leave. Bivariate analyses were carried out to compare career plans and work-related and personal characteristics and attitudes towards work among the group of midwives who indicated that they intended to leave their current job (ITL group) and those who indicated they had no intention to leave (NITL group). Significant predictors of ITL were included in the multiple binary logistic regression with 'intention to leave' as the dependent variable. In 2010, 32.7% of the 98 participating primary care midwives surveyed had considered an intention to leave their current type of job in the past year. Fewer ITL midwives wanted to be a self-employed practitioner with the full range of primary care tasks and work full-time. Significant predictors of the primary care midwives' intention to leave included a lower overall score on the job satisfaction scale (OR = 0.18; 95% CI = 0.06-0.58; p = 0.004) and being between 30 and 45 years old (OR = 2.69; 95% CI = 1.04-7.0; p = 0.041). Our study shows that, despite significant changes in the reproductive, maternal and newborn health service delivery that impact on independent midwifery practice, the majority of primary care midwives intended to stay in primary care. The absence of job satisfaction, and being in the age group between 30 and 45 years old, is associated with primary care midwives' intention to leave their current job. Ongoing monitoring will be important in the future.

An experimental predeployment training program improves self-reported patient treatment confidence and preparedness of Army combat medics.

PubMed

Gerhardt, Robert T; Hermstad, Erik L; Oakes, Michael; Wiegert, Richard S; Oliver, Jeffrey

2008-01-01

To develop and assess impact of a focused review of International Trauma Life Support (ITLS) and combat casualty care with hands-on procedure training for U.S. Army medics deploying to Iraq. The setting was a U.S. Army Medical Department Center and School and Camp Eagle, Iraq. Investigators developed and implemented a command-approved prospective educational intervention with a post hoc survey. Subjects completed a three-day course with simulator and live-tissue procedure laboratories. At deployment's end, medics were surveyed for experience, confidence, and preparedness in treating various casualty severity levels. Investigators used two-tailed t-test with unequal variance for continuous data and chi-square for categorical data. Twenty-nine medics deployed. Eight completed the experimental program. Twenty-one of 25 (84%) available medics completed the survey including six of the eight (75%) experimental medics. The experimental group reported significantly greater levels of preparedness and confidence treating "minimal," "delayed," and "immediate" casualties at arrival in Iraq. These differences dissipated progressively over the time course of the deployment. This experimental program increased combat medic confidence and perceived level of preparedness in treating several patient severity levels. Further research is warranted to determine if the experimental intervention objectively improves patient care quality and translates into lives saved early in deployment.

Promotor Regions Determining Over-Expression of Metalloproteinase Genes in Breast Cancer

DTIC Science & Technology

1999-06-01

G., Ph.D. 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS( ES ) 8. PERFORMING ORGANIZATION REPORT NUMBER Royal Prince Alfred Hospital Camperdown, NSW...2050, Australia 9. SPONSORING / MONITORING AGENCY NAME(S) AND ADDRESS( ES ) 10. SPONSORING / MONITORING AGENCY REPORT NUMBER U.S. Army Medical Research...BioTechniques 3 Research Reports satec , Adelaidetusralia) per reaction. Plasmids ItL of phosphate-buffered saline (PBS)When included,- co petor

Effects of Chinese medicinal herbs on a rat model of chronic Pseudomonas aeruginosa lung infection.

PubMed

Song, Z; Johansen, H K; Moser, C; Høiby, N

1996-05-01

The aim of the study was to evaluate the effects of two kinds of Chinese medicinal herbs, Isatis tinctoria L (ITL) and Daphne giraldii Nitsche (DGN), on a rat model of chronic Pseudomonas aeruginosa lung infection mimicking cystic fibrosis (CF). Compared to the control group, both drugs were able to reduce the incidence of lung abscess (p < 0.05) and to decrease the severity of the macroscopic pathology in lungs (p < 0.05). In the great majority of the rats, the herbs altered the inflammatory response in the lungs from an acute type inflammation, dominated by polymorphonuclear leukocytes (PMN), to a chronic type inflammation, dominated by mononuclear leukocytes (MN). DGN also improved the clearance of P. aeruginosa from the lungs (p < 0.03) compared with the control group. There were no significant differences between the control group and the two herbal groups with regard to serum IgG and IgA anti-P. aeruginosa sonicate antibodies. However, the IgM concentration in the ITL group was significantly lower than in the control group (p < 0.03). These results suggest that the two medicinal herbs might be helpful to CF patients with chronic P. aeruginosa lung infection, DGN being the most favorable.

Quality of work life as a predictor of nurses' intention to leave units, organisations and the profession.

PubMed

Lee, Ya-Wen; Dai, Yu-Tzu; McCreary, Linda L

2015-05-01

To examine the relationships between quality of work life (QWL) and nurses' intention to leave their unit (ITLunit), organisation (ITLorg) and profession (ITLpro). The high turnover rate among nurses presents a major challenge to health care systems across the globe. QWL plays a significant role in nurses' turnover. A descriptive cross-sectional survey design was conducted via purposive sampling of 1283 hospital nurses and administering the Chinese version of the Quality of Nursing Work Life scale (C-QNWL), a three-ITL-type scale questionnaire, and a demographic questionnaire for individual- and work-related variables. Descriptive data, correlations, and ordinal regression models were analyzed. QWL predicted ITLpro and ITLorg better than ITLunit. Three QWL dimensions (work arrangement and workload, nursing staffing and patient care, and work-home life balance) were significantly predictive of all three ITL measures. However, the dimension of teamwork and communication was only predictive for ITLunit, not for ITLorg and ITLpro. Different patterns of QWL dimensions are predictive of ITLunit, ITLorg, and ITLpro. The study provides important information to nurse administrators about the aspects of QWL that most commonly lead nurses to leave their units, organisations, and even the profession itself. © 2013 John Wiley & Sons Ltd.

Domain-General Mechanisms for Speech Segmentation: The Role of Duration Information in Language Learning

PubMed Central

2016-01-01

Speech segmentation is supported by multiple sources of information that may either inform language processing specifically, or serve learning more broadly. The Iambic/Trochaic Law (ITL), where increased duration indicates the end of a group and increased emphasis indicates the beginning of a group, has been proposed as a domain-general mechanism that also applies to language. However, language background has been suggested to modulate use of the ITL, meaning that these perceptual grouping preferences may instead be a consequence of language exposure. To distinguish between these accounts, we exposed native-English and native-Japanese listeners to sequences of speech (Experiment 1) and nonspeech stimuli (Experiment 2), and examined segmentation using a 2AFC task. Duration was manipulated over 3 conditions: sequences contained either an initial-item duration increase, or a final-item duration increase, or items of uniform duration. In Experiment 1, language background did not affect the use of duration as a cue for segmenting speech in a structured artificial language. In Experiment 2, the same results were found for grouping structured sequences of visual shapes. The results are consistent with proposals that duration information draws upon a domain-general mechanism that can apply to the special case of language acquisition. PMID:27893268

Soil-Structure Interaction Study of Red River Lock and Dam No. 1 Subjected to Sediment Loading

DTIC Science & Technology

1993-09-01

Sediment Loading by Robert M. Ebeling, Reed L. Mosher, Kevin Abraham Information Technology Laboratory John F. Peters Geotechnical Laboratory DTIC fl ELECTE...Robert M. Ebeling, Reed L. Mosher, Kevin Abraham Information Technology Laboratory John F. Peters Geotechnical Laboratory U.S. Army Corps of Engineers...Division (CAED), Informa- tion Technology Laboratory (ITL), Dr. Reed L. Mosher, Acting Chief, CAED, Mr. Kevin Abraham, Scientific and Engineering

An osprey is released at CCAFS

NASA Technical Reports Server (NTRS)

2000-01-01

Angy Chambers, senior wildlife biologist for Environmental Support Contract/Dynamac, holds a juvenile osprey before releasing it at Cape Canaveral Air Force Station. As a nestling, the osprey fell twice from its nest, located on a light pole in the ITL area of CCAFS. Chambers determined the bird might have a broken leg and gave it to the Florida Wildlife Hospital for treatment. The osprey was released the same day as the two great horned owls.

Analysis of Rotary Aircraft Alternatives for NATO SOF Organic Air Wing

DTIC Science & Technology

2012-06-01

analysis with an assumed program start in 2013 and an end in 2019 to determine the impact of short program duration on platform selection. D...FY12 GO\\ LR,~itl\\ l Sli LABOR H13 (J()VI R\\\\iFI\\TSE I AROR FY14 GOVLR\\\\iLI\\ I Sl:. LABOR H15 SI:.PO CSS FY II SII’O CSS FY 12 SEI’() CSS fY 13

U.S. EPA, Pesticide Product Label, LONZA BARDAC - 205M, 05/22/1990

EPA Pesticide Factsheets

2011-04-14

... If s.illo .... i"".di.hly ,i •• 3-4 ,hHts .f .ilt; if ..... ... O. lOt ;nduCI .'MiliA,. CH I • "ys ic i ••. ... It is •• i,liti'l ,I ftdtril liN t, .St t'is ,r,d.ct il • • , •• r inc •• sist.,t Kit' itl 1 ••• li.,. ...

KSC00pp0969

NASA Image and Video Library

2000-06-07

Angy Chambers, senior wildlife biologist for Environmental Support Contract/Dynamac, holds a juvenile osprey before releasing it at Cape Canaveral Air Force Station. As a nestling, the osprey fell twice from its nest, located on a light pole in the ITL area of CCAFS. Chambers determined the bird might have a broken leg and gave it to the Florida Wildlife Hospital for treatment. The osprey was released the same day as the two great horned owls

KSC-00pp0969

NASA Image and Video Library

2000-06-07

Angy Chambers, senior wildlife biologist for Environmental Support Contract/Dynamac, holds a juvenile osprey before releasing it at Cape Canaveral Air Force Station. As a nestling, the osprey fell twice from its nest, located on a light pole in the ITL area of CCAFS. Chambers determined the bird might have a broken leg and gave it to the Florida Wildlife Hospital for treatment. The osprey was released the same day as the two great horned owls

Research on Intense Electron Beams and Applications.

DTIC Science & Technology

1983-08-01

lITL IA-y < Tj-2 each figure, the real part of Atp- 1 in centimeters10 A-, > TL,/2’ (5 is plotted versus time in seconds. The resonance condition, Eq...Physics Division, Naval Research Laboratory. S-The report covers the period June 1981 to June 1983, during which time investigations were conducted into...areas: (1) Transverse linear beam dynamics in ’. time varying, azimuthally symmetric fields, (2) Effects of grad B0 induced drifts, (3) Orbital

An Investigation of Corrosion Mitigation Strategies for Aging Post Tensioned Cables

DTIC Science & Technology

2017-01-01

ER D C/ IT L TR -1 7- 1 Navigation Systems Research Program An Investigation of Corrosion Mitigation Strategies for Aging Post -Tensioned...for Aging Post -Tensioned Cables Ernest L. Miller, Barry C. White, Richard W. Haskins, Robert M. Ebeling, and James A. Evans Information Technology...Reduced Capacity of Multistrand Post Tensioned Ground Anchorage Due to Tendon Corrosion Work Unit number L9C833 ERDC/ITL TR-17-1 ii Abstract Over

An Investigation of Corrosion Mitigation Strategies for Aging Post-Tensioned Cables

DTIC Science & Technology

2017-01-01

ER D C/ IT L TR -1 7- 1 Navigation Systems Research Program An Investigation of Corrosion Mitigation Strategies for Aging Post -Tensioned...for Aging Post -Tensioned Cables Ernest L. Miller, Barry C. White, Richard W. Haskins, Robert M. Ebeling, and James A. Evans Information Technology...Reduced Capacity of Multistrand Post Tensioned Ground Anchorage Due to Tendon Corrosion Work Unit number L9C833 ERDC/ITL TR-17-1 ii Abstract Over

Cost Analysis of NEDU’s Helium Reclaimer.

DTIC Science & Technology

1981-09-01

T ITLE (and Subtitle) S . TYPE OF REPORT 6 PERIOD COVERED COST ANALYSIS OF NEDU’S HELIUM RECLAIMER . Survey 6 . PERFORMING ORG. REPORT NUMSER 7...telephone conversation). 5. Charles T. Horngren , "Introduction tu Management Accounting " Fourth Edition. 3 . .4m mmnssmmlm~ • FIGURE 1 PRESENT, FUTURE AND...FEET COST OF PERIODIC MAINTENANCE OF HELIUM ELECTRIiC COST COST OF TOTAL RECLAIMED POWER NEW COST PRESENT WORTH YEAR N PER YEAR ( S /1000 FT

A Critical Analysis of the U.S. Marine Corps 04XX Logistics Community

DTIC Science & Technology

2013-04-15

logistics community. Study .!Manuscript c. PAGE COUNT d . SUBJECT AREA 221 An examination of the training and readiness of a specific military...occupational field. 2. AUTHOR/SPEAKER e. NA M E (LasT. First. M iddle lnhia/J b . RANK c . T ITLE Lathers, Jolm, D. GS-12 Instructional Systems/ Training ...Specialist d. OFFICE e. AGENCY Marine Corps Combat Service Support Schools DoD, DoN, USMC, TECOM, Ground Training Branch 3 . PRESENTATION/ PUBLICA

Evaluation of Corrosion Inhibitors as Lubricity Improvers

DTIC Science & Technology

1988-07-01

IF AFWAL-TR-88-2036 I. ov EVALUATION OF CORROSION , INHIBITORS AS LUBRICITY IMPROVERS 0 T.B. Biddle W. H. Edwards United Technologies Corporation...TASK WORK UNIT ELEMENT NO. NO. NO. NO. ITL (include Security C.aulf.cal.on) 6220 F .--- 3048-_ 05 51 valuation of Corrosion Inhibitors as Lubricity...numkr) o GROUP SUB. GR. Bal12nQ ylinder Lubricity)Eva ator, BOCLE, Corrosion Inhibitor , Fuel 01 03 Lubricity, MIL!AI5017, QPL-2 17 Reverse Phase) High

Workshop on Atmospheric Transmission Modeling

DTIC Science & Technology

1975-12-01

i I ,. PAPER, P-1152 WORKSHOP ON ATMOSPHERIC TRANSMISSION MODELING Conducted Rt IDA Arlington, Virginia " • 28 January 1975 Vincent J. Corcoran...34Program Chairman WORKSHOP PROCEEDINGS .- _ December 1975 ’Ii il INSTITUTE FOR DEFENSE ANALYSES S.... SCIENCE AND TECHNOLOGY DIVISION *N.• . .. IDA Log HO...Transmission, Modeling, Optical Propagation, Attenuation 0. AIIIIftACT~~II9C- O~* l@I ~..e ~I~tl j Ai ub --ýThis is a report on a workshop on atmospheric

Gastric adenocarcinoma in common variable immunodeficiency: features of cancer and associated gastritis may be characteristic of the condition.

PubMed

De Petris, Giovanni; Dhungel, Bal M; Chen, Longwen; Chang, Yu-Hui H

2014-10-01

Common variable immunodeficiency (CVID) is associated with an increased risk of gastric cancer. The aim of the study was to determine the morphological features of CVID-associated gastric adenocarcinoma (CAGA) and of the background gastritis. The population of gastric cancer patients with CVID of Mayo Clinic in the period 2000-2010 was studied; 6 cases of CVID (2 males, 4 females, average age 47 years, age range 26-71 years) were found in 5793 patients with gastric cancer in the study period. Each patient underwent gastric resection for which histology slides were reviewed. Chronic gastritis variables, CVID-related findings, and features of the adenocarcinoma were recorded. CAGA was of intestinal type, with high number of intratumoral lymphocytes (ITLs). Cancer was diagnosed in younger patients than in the overall population of gastric cancer. Severe atrophic metaplastic pangastritis with extensive dysplasia was present in the background in 4 cases, with features of lymphocytic gastritis in 2 cases. Features of CVID (plasma cells paucity in 4 of 6 cases, lymphoid nodules prominent in four cases) could be detected. In summary, gastric adenocarcinoma at young age with ITLs, accompanied by atrophic metaplastic pangastritis, should alert the pathologist of the possibility of CAGA. It follows that, in presence of those characteristics, the search of CVID-associated abnormalities should be undertaken in the nonneoplastic tissues. © The Author(s) 2014.

Study of the thermoluminescence emission of a natural α-cristobalite

NASA Astrophysics Data System (ADS)

Correcher, V.; Garcia-Guinea, J.; Bustillo, M. A.; Garcia, R.

The thermoluminescence (TL) properties of a well-characterised natural α-cristobalite from Lanzarote (Canary Islands, Spain) have been studied. The natural blue emission (at 400 nm) of this silica polymorph of quartz reveals the appearance of three groups of components peaked at 150, 230-240 and 370 °C, which could be associated, respectively, with (i) structural defects (similar to quartz), (ii) the reversible phase transition from α-cristobalite to β-cristobalite and (iii) electron recombination with unstable holes trapped at oxygen vacancies next to Al ions linked to the formation of β-cristobalite. Similar to quartz, the induced TL (ITL) glow curves display four maxima, peaked at 90, 110, 180 and 220 °C, which could be respectively associated with (i) oxygen vacancies, (ii) recombination of electrons with (H3O4)° centres that can act as hole traps, (iii) [GeO4]- centres that are stabilised with monovalent cations (H+, Li+ or Na+) and (iv) [AlO4]° hole-like centres that are created when alkali ions are moving away from Al sites related probably to the reversible phase transition. The dose dependence of the ITL emission of β-irradiated samples at room temperature exhibits a linear increase in the glow intensity of the 180 °C maximum when increasing the dose (r=0.997) in the range 0.5-10 Gy.

Secret science: tobacco industry research on smoking behaviour and cigarette toxicity.

PubMed

Hammond, David; Collishaw, Neil E; Callard, Cynthia

2006-03-04

A lack of scientific data remains the principal obstacle to regulating cigarette toxicity. In particular, there is an immediate need to improve our understanding of the interaction between smoking behaviour and product design, and its influence on cigarette deliveries. This article reviews internal tobacco industry documents on smoking behaviour research undertaken by Imperial Tobacco Limited (ITL) and British-American Tobacco (BAT). BAT documents indicate that smokers vary their puffing behaviour to regulate nicotine levels and compensate for low-yield cigarettes by smoking them more intensely. BAT research also shows that the tar and nicotine delivered to smokers is substantially greater than the machine-smoked yields reported to consumers and regulators. Internal documents describe a strategy to maximise this discrepancy through product design. In particular, BAT developed elastic cigarettes that produced low yields under standard testing protocols, whereas in consumers' hands they elicited more intensive smoking and provided higher concentrations of tar and nicotine to smokers. Documents also show that BAT pursued this product strategy despite the health risks to consumers and ethical concerns raised by senior scientists, and paired it with an equally successful marketing campaign that promoted these cigarettes as low-tar alternatives for health-concerned smokers. Overall, the documents seem to reveal a product strategy intended to exploit the limitations of the testing protocols and to intentionally conceal from consumers and regulators the potential toxicity of BAT products revealed by BAT's own research. Tobacco industry research underscores the serious limitations of the current cigarette testing protocols and the documents describe deceptive business practices that remain in place.

Simulation of Edge Effects in Electroanalytical Experiments by Orthogonal Collocation. Part I. Two Dimensional Collocation and Theory for Chronoamperometry.

DTIC Science & Technology

1982-08-18

cselixataan has been shown to Pro, imonedimie. FIN SMCS10 tam we m Vp assuma threry. In lacd. it has been shown lor difeent oide a pouwerful method to simulate...Afortd meaden 11. ’by)W~itl 116.ttousol =odimra She delade Ia~c Ul - by she Oa SWISS INaolder 10 wAce shem. re’te" s s m rnb -bute r~ 6 X-06 CSc a I

Structural Engineering Managers - Innovation Challenges for their Skills

NASA Astrophysics Data System (ADS)

Linkeschová, D.; Tichá, A.

2015-11-01

The profession of a structural engineer is highly responsible, because the consequences of a structural engineer's errors result not only in economic damage to the property and often irreversible damage to the environment, they can also lead to direct loss of lives. In the current turbulent, dynamically developing society the managerial methods of structural engineers should not stagnate at the level of the last century applications. This paper deals with the challenges which the ongoing century poses to structural engineers and managers. It compares the results of research regarding the current state of managerial skills of structural engineers in Czech building companies to the defined skills of the 21st century's managers according to the global research programme ITL Research and according to the Vision for the Future of Structural Engineering, drawn up by Structural Engineering Institute - SEI ASCE.

Properties of tree rings in LSST sensors

DOE PAGES

Park, H. Y.; Nomerotski, A.; Tsybychev, D.

2017-05-30

Images of uniformly illuminated sensors for the Large Synoptic Survey Telescope have circular periodic patterns with an appearance similar to tree rings. Furthermore, these patterns are caused by circularly symmetric variations of the dopant concentration in the monocrystal silicon boule induced by the manufacturing process. Non-uniform charge density results in the parasitic electric field inside the silicon sensor, which may distort shapes of astronomical sources. Here, we analyzed data from fifteen LSST sensors produced by ITL to determine the main parameters of the tree rings: amplitude and period, and also variability across the sensors tested at Brookhaven National Laboratory. Treemore » ring pattern has a weak dependence on the wavelength. But the ring amplitude gets smaller as wavelength gets longer, since longer wavelengths penetrate deeper into the silicon. Tree ring amplitude gets larger as it gets closer to the outer part of the wafer, from 0.1 to 1.0%, indicating that the resistivity variation is larger for larger radii.« less

Properties of tree rings in LSST sensors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, H. Y.; Nomerotski, A.; Tsybychev, D.

Images of uniformly illuminated sensors for the Large Synoptic Survey Telescope have circular periodic patterns with an appearance similar to tree rings. Furthermore, these patterns are caused by circularly symmetric variations of the dopant concentration in the monocrystal silicon boule induced by the manufacturing process. Non-uniform charge density results in the parasitic electric field inside the silicon sensor, which may distort shapes of astronomical sources. Here, we analyzed data from fifteen LSST sensors produced by ITL to determine the main parameters of the tree rings: amplitude and period, and also variability across the sensors tested at Brookhaven National Laboratory. Treemore » ring pattern has a weak dependence on the wavelength. But the ring amplitude gets smaller as wavelength gets longer, since longer wavelengths penetrate deeper into the silicon. Tree ring amplitude gets larger as it gets closer to the outer part of the wafer, from 0.1 to 1.0%, indicating that the resistivity variation is larger for larger radii.« less

Develop a Biomedical Database on the Medical Aspects of Chemical Defense. Volume 2

DTIC Science & Technology

1981-10-23

00 I Ac .- 4)4)A4 I.4a.S r- -A 0 0 0 .6 M 00A A w z 0 -4 .4 0c -. - 02 -4 X c w.0 0 4.1> > . f5-4 C .-4 z 02!t C to to 4 C0.12.) " AC m W U’ u m 0 U...AZJUTALZA fGZ GA=1 A? AMEICANl SM(OCAZZ a RAMISLNDAN AS AUTJSIAso lw" AV A4GUILL.A IN sAm. I=L OF SA SHRl o SIMST MIDA&~ OCSI Tv I’May so ARSAWS IQ U.S...lUSCZLIA-0CG PACMfC ISLANDS 3C ZRAK is IRA 30 SEMUDA is ISRAEL BE stwium IT IT=L BF aAAMMAA. 112 IV rMol? COAST ac 31?ADUI IRAQ.4AMZ ARA3XJ I1WZRAL

The Acousto-Optic Interaction in an Infinite Slab of Isotropic Material,

DTIC Science & Technology

1980-04-01

AD-A097 202 HARRY DIAMOND LABS ADELPHI MD F/S 17/1 THE ACOUSTO - OPTIC INTERACTION IN AN INFINITE SLAB OF ISOTROPIC -- ETC(U) APR 80 S D SCHARF...611101.91A0011 .A1.A1 HOL Project: A10935 1S. KEY WONS (Cf ft "W reweee eld. It neceseeM md Io.t.Itl by block nm er) Acousto - optics Diffraction Mathieu... Acousto - Optic Interaction for Bragg Angles ...................... 13 FIGURES 1. Incident wave is split by acoustic wave into discrete diffracted orders

A Strategic Approach to the Maritime-Continental Strategy Debate

DTIC Science & Technology

1987-02-01

TYPE N/A 3. DATES COVERED - 4. TITLE AND SUBTITLE A Strategic Approach to the Maritime-Continental Strategy Debate 5a. CONTRACT NUMBER 5b...War Col ]. e C.le, Fort Les ].ey J. McNair, Washington, DC 70319-6000. ii THE NATIONAL. WAR COLLEL:iE S’I’RATEGI C S’FUDIES REF:’OR’I" ABSTRACf...cesses, and ’the study ,’-,f strategi,- the,:,ry alqd histc, ry. Itl additi,:,n to his civilian gc, verr ~r,~ent expc.ri .... ence, his rrlilitary

Fuel Cell Power System and Equipment Bay for High Altitude, Super- Pressured, Powered Aerostat (HASPA) Operational Manual

DTIC Science & Technology

1975-05-20

across the anode side of the membrane -electrode assembly. Flow distribution of the hydrogen gas from cell to cell is not a problem as that system is...DOCUMENTATION PAGE RiEAI T C OMPLETING FORM V ~i 12.BR NUMVE AccEisioN NO4 II T AAO UM811" 4. TITL[ (Wd SibItl@) ... . I YPE or REPORT I PERIOD COVERED...instructions for Fuel Cell Module FS-2. The ion exchange membrane fuel cell module is produced by the General Electric Company, Direct Energy

Tables of Optimal Allocations of Observations for Comparing Treatments with a Control.

DTIC Science & Technology

1981-01-01

variatevpp v ,p,P t-distribution (p-variate Itl-distribution) with d.f. v and equal corre- lations p = N /C (N ); tables of t are given by Krishnaiah and1 0 1...values of (tp,/) 2 tabulated for selected -d and 1-a by Krishnaiah and Armitage (1965). Entries for v = 60 1.. the tables of Hahn and Hendrickson (1971...with a Control," Multivariate Analysis - II (Ed. P.R. Krishnaiah ), New York: Academic Press, 463-473. Bechhofer, R.E. and Nocturne, D.J. (1972), "Optimal

A Design for an Interactive Videodisc Training Program for the Sun Workstation.

DTIC Science & Technology

1984-03-01

level, beginner program. A - l *" Ii. * reply was obtained by asl:ing it the, re2t any cre . t 1 1 t I.t cf -,,I-tL Five sThd thet thv did not - rv more... flowcharts . These three forms spring from the need to specify motion sequences, still frames, and the manner of interaction or branching to be implemented...but should be similar to good over- head transparencies with lots of space between lines. Branching networks or flowcharts are used to describe the

Sediments on the Southeastern Flank of the Bermuda Pedestal.

DTIC Science & Technology

1983-03-01

clustered on the southeastern edge of the platform. Around the remainder of the platform lie carbonate banks and submerged and lithified dune ridges covered...extends seaward I from the reef to the edge of the platform. * Based on bathymetry (Fig. 2), there is a discernible pattern of slopes on the Bermuda...Challenger Ba / Plantagenet B do FIUR 2. BahmtyofteBrud emu 6 OF +-- ¢s M sI AN o "_., /’- * SNOALS.,_ _ITlH C(3LALCAL ] I# MM IN filOl FIGURE 3. The Bermuda

SUS Source Level Error Analysis

DTIC Science & Technology

1978-01-20

RIECIP1IEN’ CATALOG NUMBER * ITLE (and SubaltIe) S. TYP aof REPORT & _V9RCO SUS~ SOURCE LEVEL ERROR ANALYSIS & Fia 1.r,. -. pAURWORONTIUMm N (s)$S...Fourier Transform (FFTl) SUS Signal model ___ 10 TRA&C (CeEOINIMII1& ro"* *140O tidat n9#*#*Y a"d 0e~ntiff 6T 69*.4 apbt The report provides an analysis ...of major terms which contribute to signal analysis error in a proposed experiment to c-librate sourr - I levels of SUS (Signal Underwater Sound). A

Simulation and Advanced Second Moment Reliability Analyses of Pile Groups Using CPGA-R: Formulation, User’s Guide, and Example Problems

DTIC Science & Technology

2013-09-01

that are going to be defined below. Card 3 – Variable data (repeated NUMVARS times): DATATYPE ERDC/ITL TR-13-2 120 DATAID DATACONSTITUENTID...DISTDATA1 DISTDATA2 DISTDATA3 DISTDATA4 DISTTYPE This card is repeated for as many variables specified in Card 2. DATATYPE is a string variable that...CPGA table that is being referenced. For instance, if LOAD is the DATATYPE , then px is the constituent force in the x direction for the specified

Mated Fingerprint Card Pairs (Volumes 1-5)

National Institute of Standards and Technology Data Gateway

NIST Mated Fingerprint Card Pairs (Volumes 1-5) (Web, free access)   The NIST database of mated fingerprint card pairs (Special Database 9) consists of multiple volumes. Currently five volumes have been released. Each volume will be a 3-disk set with each CD-ROM containing 90 mated card pairs of segmented 8-bit gray scale fingerprint images (900 fingerprint image pairs per CD-ROM). A newer version of the compression/decompression software on the CDROM can be found at the website http://www.nist.gov/itl/iad/ig/nigos.cfm as part of the NBIS package.

Radioluminescence of polyester resin modified with acrylic acid and its salts

NASA Astrophysics Data System (ADS)

Szalińska, H.; Wypych, M.; Pietrzak, M.; Szadkowska-Nicze, M.

Polimal-109 polyester resin and its compounds containing acrylic acid and its salts such as: sodium, potassium, magnesium, calcium, barium, iron, cobalt, copper and manganese acrylates were studied by the radioluminescence method, including isothermal luminescence (ITL) at a radiation temperature of 77 K, thermoluminescence (RTL) and spectral distributions of isothermal luminescence. Measurements of optical absorption at 77 K before and after irradiation of the investigated samples were also carried out. The results obtained have shown that metal ions play a significant part in the processes taking place in the polyester matrix under the influence of γ 60Co radiation.

Simplified Analysis Procedures for Flexible Approach Wall Systems Founded on Groups of Piles and Subjected to Barge Train Impact

DTIC Science & Technology

2012-09-01

be seen that the constant of horizontal subgrade reaction is lower for submerged sites than for “dry” (or more precisely, moist) sites. This is...constant of horizontal subgrade reaction for submerged sites and dry or moist sites can be seen in Figure 3-4. ERDC/ITL TR-12-3 46 Table 3-2...moist sand, proposed values for nh tcf 7 21 56 pcf 14,000 42,000 112,000 pci 8.10 24.31 64.81 Submerged sand, proposed values for nh tcf 4 14 34

Strategically Leapfrogging Education in Prehospital Trauma Management: Four-Tiered Training Protocols

PubMed Central

Abraham, Rohit; Vyas, Dinesh; Narayan, Mayur; Vyas, Arpita

2016-01-01

Trauma-related injury in fast developing countries are linked to 90% of international mortality rates, which can be greatly reduced by improvements in often non-existent or non-centralized emergency medical systems (EMS)—particularly in the pre-hospital care phase. Traditional trauma training protocols—such as Advanced Trauma Life Support (ATLS), International Trauma Life Support (ITLS), and Basic Life Support (BLS)—have failed to produce an effective pre-hospital ground force of medical first responders. To overcome these barriers, we propose a new four-tiered set of trauma training protocols: Massive Open Online Course (MOOC) Trauma Training, Acute Trauma Training (ATT), Broad Trauma Training (BTT), and Cardiac and Trauma Training (CTT). These standards are specifically differentiated to accommodate the educational and socioeconomic diversity found in fast developing settings, where each free course is taught in native, lay language while ensuring the education standards are maintained by fully incorporating high-fidelity simulation, video-recorded debriefing, and retraining. The innovative pedagogy of this trauma education program utilizes MOOC for global scalability and a “train-the-trainer” approach for exponential growth—both components help fast developing countries reach a critical mass of first responders needed for the base of an evolving EMS. PMID:27419222

Strategically Leapfrogging Education in Prehospital Trauma Management: Four-Tiered Training Protocols.

PubMed

Abraham, Rohit; Vyas, Dinesh; Narayan, Mayur; Vyas, Arpita

2015-12-01

Trauma-related injury in fast developing countries are linked to 90% of international mortality rates, which can be greatly reduced by improvements in often non-existent or non-centralized emergency medical systems (EMS)-particularly in the pre-hospital care phase. Traditional trauma training protocols-such as Advanced Trauma Life Support (ATLS), International Trauma Life Support (ITLS), and Basic Life Support (BLS)-have failed to produce an effective pre-hospital ground force of medical first responders. To overcome these barriers, we propose a new four-tiered set of trauma training protocols: Massive Open Online Course (MOOC) Trauma Training, Acute Trauma Training (ATT), Broad Trauma Training (BTT), and Cardiac and Trauma Training (CTT). These standards are specifically differentiated to accommodate the educational and socioeconomic diversity found in fast developing settings, where each free course is taught in native, lay language while ensuring the education standards are maintained by fully incorporating high-fidelity simulation, video-recorded debriefing, and retraining. The innovative pedagogy of this trauma education program utilizes MOOC for global scalability and a "train-the-trainer" approach for exponential growth-both components help fast developing countries reach a critical mass of first responders needed for the base of an evolving EMS.

Electromagnetic-field dependence of the internal excited state of the polaron and the qubit in quantum dot with thickness

NASA Astrophysics Data System (ADS)

Bai, Xu-Fang; Xin, Wei; Yin, Hong-Wu; Eerdunchaolu

2017-06-01

The electromagnetic-field dependence of the ground and the first excited-state (GFES) energy eigenvalues and eigenfunctions of the strong-coupling polaron in a quantum dot (QD) was studied for various QD thicknesses by using the variational method of the Pekar type (VMPT). On this basis, we construct a qubit in the quantum dot (QQD) by taking a two-level structure of the polaron as the carrier. The results of numerical calculations indicate that the oscillation period of the qubit, {itT}{in0}, increases with increasing the thickness of the quantum dot (TQD) {itL}, but decreases with increasing the cyclotron frequency of the magnetic field (CFMF) ω{in{itc}}, electric-field strength {itF}, and electron-phonon coupling strength (EPCS) α. The probability density of the qubit |Ψ({itρ}, {itz}, {itt})|{su2} presents a normal distribution of the electronic transverse coordinate ρ, significantly influenced by the TQD and effective radius of the quantum dot (ERQD) {itR}{in0}, and shows a periodic oscillation with variations in the electronic longitudinal coordinate {itz}, polar angle φ and time {itt}. The decoherence time τ and the quality factor {itQ} of the free rotation increase with increasing the CFMF ω{in{itc}}, dispersion coefficient η, and EPCS α, but decrease with increasing the electric-field strength {itF}, TQD {itL}, and ERQD {itR}{in0}. The TQD is an important parameter of the qubit. Theoretically, the target, which is to regulate the oscillation period, decoherence time and quality factor of the free rotation of the qubit, can be achieved by designing different TQDs and regulating the strength of the electromagnetic field.

An Exploration of Rhythmic Grouping of Speech Sequences by French- and German-Learning Infants

PubMed Central

Abboub, Nawal; Boll-Avetisyan, Natalie; Bhatara, Anjali; Höhle, Barbara; Nazzi, Thierry

2016-01-01

Rhythm in music and speech can be characterized by a constellation of several acoustic cues. Individually, these cues have different effects on rhythmic perception: sequences of sounds alternating in duration are perceived as short-long pairs (weak-strong/iambic pattern), whereas sequences of sounds alternating in intensity or pitch are perceived as loud-soft, or high-low pairs (strong-weak/trochaic pattern). This perceptual bias—called the Iambic-Trochaic Law (ITL)–has been claimed to be an universal property of the auditory system applying in both the music and the language domains. Recent studies have shown that language experience can modulate the effects of the ITL on rhythmic perception of both speech and non-speech sequences in adults, and of non-speech sequences in 7.5-month-old infants. The goal of the present study was to explore whether language experience also modulates infants’ grouping of speech. To do so, we presented sequences of syllables to monolingual French- and German-learning 7.5-month-olds. Using the Headturn Preference Procedure (HPP), we examined whether they were able to perceive a rhythmic structure in sequences of syllables that alternated in duration, pitch, or intensity. Our findings show that both French- and German-learning infants perceived a rhythmic structure when it was cued by duration or pitch but not intensity. Our findings also show differences in how these infants use duration and pitch cues to group syllable sequences, suggesting that pitch cues were the easier ones to use. Moreover, performance did not differ across languages, failing to reveal early language effects on rhythmic perception. These results contribute to our understanding of the origin of rhythmic perception and perceptual mechanisms shared across music and speech, which may bootstrap language acquisition. PMID:27378887

ExoMars Trace Gas Orbiter Instrument Modelling Approach to Streamline Science Operations

NASA Astrophysics Data System (ADS)

Munoz Fernandez, Michela; Frew, David; Ashman, Michael; Cardesin Moinelo, Alejandro; Garcia Beteta, Juan Jose; Geiger, Bernhard; Metcalfe, Leo; Nespoli, Federico; Muniz Solaz, Carlos

2018-05-01

ExoMars Trace Gas Orbiter (TGO) science operations activities are centralised at ESAC's Science Operations Centre (SOC). The SOC receives the inputs from the principal investigators (PIs) in order to implement and deliver the spacecraft pointing requests and instrument timelines to the Mission Operations Centre (MOC). The high number of orbits per planning cycle has made it necessary to abstract the planning interactions between the SOC and the PI teams at the observation level. This paper describes the modelling approach we have conducted for TGOís instruments to streamline science operations. We have created dynamic observation types that scale to adapt to the conditions specified by the PI teams including observation timing, and pointing block parameters calculated from observation geometry. This approach is considered and improvement with respect to previous missions where the generation of the observation pointing and commanding requests was performed manually by the instrument teams. Automation software assists us to effectively handle the high density of planned orbits with increasing volume of scientific data and to successfully meet opportunistic scientific goals and objectives. Our planning tool combines the instrument observation definition files provided by the PIs together with the flight dynamics products to generate the Pointing Requests and the instrument timeline (ITL). The ITL contains all the validated commands at the TC sequence level and computes the resource envelopes (data rate, power, data volume) within the constraints. At the SOC, our main goal is to maximise the science output while minimising the number of iterations among the teams, ensuring that the timeline does not violate the state transitions allowed in the Mission Operations Rules and Constraints Document.

Neurocognitive enhancement in older adults: comparison of three cognitive training tasks to test a hypothesis of training transfer in brain connectivity.

PubMed

Strenziok, Maren; Parasuraman, Raja; Clarke, Ellen; Cisler, Dean S; Thompson, James C; Greenwood, Pamela M

2014-01-15

The ultimate goal of cognitive enhancement as an intervention for age-related cognitive decline is transfer to everyday cognitive functioning. Development of training methods that transfer broadly to untrained cognitive tasks (far transfer) requires understanding of the neural bases of training and far transfer effects. We used cognitive training to test the hypothesis that far transfer is associated with altered attentional control demands mediated by the dorsal attention network and trained sensory cortex. In an exploratory study, we randomly assigned 42 healthy older adults to six weeks of training on Brain Fitness (BF-auditory perception), Space Fortress (SF-visuomotor/working memory), or Rise of Nations (RON-strategic reasoning). Before and after training, cognitive performance, diffusion-derived white matter integrity, and functional connectivity of the superior parietal cortex (SPC) were assessed. We found the strongest effects from BF training, which transferred to everyday problem solving and reasoning and selectively changed integrity of occipito-temporal white matter associated with improvement on untrained everyday problem solving. These results show that cognitive gain from auditory perception training depends on heightened white matter integrity in the ventral attention network. In BF and SF (which also transferred positively), a decrease in functional connectivity between SPC and inferior temporal lobe (ITL) was observed compared to RON-which did not transfer to untrained cognitive function. These findings highlight the importance for cognitive training of top-down control of sensory processing by the dorsal attention network. Altered brain connectivity - observed in the two training tasks that showed far transfer effects - may be a marker for training success. © 2013 Elsevier Inc. All rights reserved.

Program Listings for EOSAEL 80-B and Ancillary Codes AGAUS and FLASH. Volume II. User’s Manual Supplement.

DTIC Science & Technology

1982-02-01

FORMAT(1X,39NINVALID INPUTS TO CWIC. IERR-1 RETURNED) CWC01450 IERR=1 CWCO01460 RETURN CWC6OI470 20 TInE=RV 1) CWCOI4SO XO=RV( 2) CJC 01490 H3=RV( 3...ERROR CHECKS AGXO1910 IF (IT.LE.0) IT=I AGXO192o IF (IT.GT.JDIMCK(1)) CALL DIMER( ) AGX01930 IF(JDIMCKcI).LT.65) WRITE(IOUT, 1295 AGX0940 C CHECK FOR...Office System Planning Corporation ATTN: DACS -BMT (Colonel Harry F. Ennis) ATTN: COL Hank Shelton 5001 Eisenhower Avenue 1500 Wilson Boulevard

Supplemental Fingerprint Card Data (SFCD) for NIST Special Database 9

National Institute of Standards and Technology Data Gateway

Supplemental Fingerprint Card Data (SFCD) for NIST Special Database 9 (Web, free access)   NIST Special Database 10 (Supplemental Fingerprint Card Data for Special Database 9 - 8-Bit Gray Scale Images) provides a larger sample of fingerprint patterns that have a low natural frequency of occurrence and transitional fingerprint classes in NIST Special Database 9. The software is the same code used with NIST Special Database 4 and 9. A newer version of the compression/decompression software on the CDROM can be found at the website http://www.nist.gov/itl/iad/ig/nigos.cfm as part of the NBIS package.

Operation Dominic, Shot Sword Fish. Project Officers Report-Project 1.2 Surface Phenomena

DTIC Science & Technology

1985-04-01

8 78 4 . -.. =. . t...DMIAL SPRAY-DOW VELOMCE3 4 - % 8 0m o __D __ oC 400 o W0Z 02 I- 0 ) 0 -"I 6~~O,,, ’ _ _ _ _ _ _0 cs w Q00 2 . Q itl 0 0 0 0 0 0 0l0 0 02 0 0 0 0 0 0 0 0 0...8217 ’.,. " " _.. _ _ _... .. -\\. , .,. .’ ’,-,- •.-. ’-...-.’ ..,.’ USS BAUSELL 0.17 SECONDS 2 4 / 4 0.70 SECONDS FILM NO. A-IB- 8 I PRIMARY SHOCK WAVE SLICK 2 CENTRAL SPRAY AREA 3 OUTER EDGE OF SPRAY DOME 4

Limiting Impact Force Due to Yielding and Buckling of the Plates and Internal Structural Frame at the Bow of a Barge during Its Head-on Impact with a Bullnose or Cellular Structure

DTIC Science & Technology

2009-08-01

Locks and Dam. ERDC/ITL TR-09-3 16 The proposed flexible approach walls at Lock and Dams 22 and 25 consist of precast concrete beams supported...Figures 2.3 and 2.5. The rounded hull plate connecting the front and side hull plates (in blue) is shown in brown in Figures 2.2 and 2.3. Figure 2.4...approach angle column in Table 3.1 is of no consequence for these analyses. Table 3.1. Three design load condition categories, frequency of loadings

Study to Modify the Vulnerability Model of the Risk Management System

DTIC Science & Technology

1980-02-01

Willar~d W ery’William P./ Azico1l ____________ 9. Performing Organization Name and Address 10 . Work Unit No. (TRAIS) Enviro Control, Inc. One Central...I ItIi 1i 1 T ii t 1 1 SIG j- i"j U’ 1Ilm 1111 ~ 1 jI I-.-I• . --•’ • ~ ~ll l itl [ rl / /l t jIe IIst I. !oia iii•’ I II III u ii U •It : p l f Pit i...and their results are fully described and dis- cussed in Chapter 5. ŕ- 10 5. Additional VN Program Hodificatlons In the process of performing the

A Method for Determining Spiral-Bevel Gear Tooth Geometry for Finite Element Analysis

DTIC Science & Technology

1991-08-01

to0itated Ins.pecttion aind Pceci.i’i (;Irtdtite Lit Spiral Betel pp 1i7 33;4. Gear.. NA.SA- CR 4083.AASCONI FR 87 -C’ 1 1,I98-1 4 ((taint. SB H...ti-io..n. NASA 1t) 27115. A .NSC( (Nt IR [,It\\. 1ii. 1... ei al, Nietlid 1h1 irCiciteatin Lit Spiral Betel Gear.. W%’itl 86 (’-42. 1987. C𔃻...P.C , Silrlace Geiiiitetr. ’I StraiLght lintl Spiril A.SM1 ilpaper X4-DET:- 169. Oct. 1984 Betel Gear... j NCIec trait.. Nutittlat. Dc... .o iIlt

National Program for Inspection of Non-Federal Dams. Plymouth Reservoir Dam (CT 00286), Naugatuck River Basin, Plymouth, Connecticut. Phase I Inspection Report.

DTIC Science & Technology

1981-05-01

de DAM4 -3;- \\ 1 I P 671 1Vt Pon& 7-9M k JXRA- A ’ /’xz , , n: :v K’LSEP...RESERVOIR A4~ Concrete Sp’lwa Stone Approach El . 192.0 Gt os P - ate Well ra . 67 l4.0 la E . 69 . Masnr Tj Te a h Welles and (a Catchp ilsn 48 RACP .e...ITl-43 El 670.1Da Gaale: -- 8 1- E. 7 . 692.c0B - C - ~ Fl. 672.4 -1-. . 694 70 2" ie e Stoney Masnn S-I Ba 318 ’Ln Ccete - npE. 72Loe ’ El . El

A Simulation Model of the Common Strategic Rotary Launcher for Availability.

DTIC Science & Technology

1984-11-01

8217.iii . QI) I-;IC! SY ’.*,O[Q I, OF MUNI10HIN-G 0hf-,ANiZATIO𔃾 _) 110( C rri C’ir If apr-Ue __fAF IT/L,.S 11 It, Sluie arid / - ,,dc Th ,70)FL7, fc~fy...importaUnt dimce 0-cmt clodhis CREATE oRESAT. TONISL . M.VM. Nabe ube o ets ntte t h crrn tm SELEN ON. mAK(N. OLILS;) mltied from t il mouererai ucto...032 23.195 .!00 .25075 .L0734 c., ’ i3F 1.529 .307 4.972 .045 .53239 .1337) SY L V.L 377 .193 3.313 .)52 .6579 .23 15 𔃺lSfAqf 74.919 5.974 157.303

[Longitudinal follow-up of contact subjects of cases of tuberculosis in Paris].

PubMed

Fournier, A; Antoun, F; Charlois Ou, C; Muller, G; Ezri, L; Morin, P; Faure, A; Marteau, D; Keshtmand, H; Quelet, S

2015-09-01

To our knowledge, the proportion of active tuberculosis diagnosed after 12-18 months during a screening tuberculosis process in a specialized centre (centre de lutte antituberculeuse [CLAT]) has not been described in France. The majority of other countries do not have any recommendation to screen at this time. We evaluated the number of treated or not treated latent tuberculosis infections (LTI) identified during tuberculosis screening. We identified the causes of ITL non-treatment, the number of active disease cases and the proportion of subjects lost to follow-up after 12-18 months. Among the 1066 contact subjects, 159 (15 %) had a positive QuantiFERON-TB-Gold In-Tube(®) test. A prophylactic treatment with Rifinah(®) was given to 97 (61 %) subjects, 7 (7.3 %) having developed side effects that led to treatment interruption. A high proportion (56 %) of contact subjects were lost of follow-up and the main reason for no prophylactic treatment (20/52, 38 %) was due to these losses. No active disease cases were identified among the 474 (44 %) contact subjects who had a chest X-ray after 12-18 months follow-up by the CLAT. The low level of positive QuantiFERON-TB-Gold In-Tube(®) tests (15 %) could be explained by the high specificity of this test and the strong proportion of occupational contacts, of whom a probably significant number were not exposed to active disease. The absence of active disease at 12-18 months and a majority (56 %) of contact subjects lost from follow-up at this period let us propose not to recall contact subjects at 12-18 months with the exception of those living under the same roof as the index case and/or those having a cumulative contact time of greater than 100 hours during the theoretical infectious period. This proposal remains to be confirmed by other studies, particularly including possible secondary cases diagnosed outside the screening periods by the CLAT. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Systematic Assessment of Strategies for Lung-targeted Delivery of MicroRNA Mimics

PubMed Central

Schlosser, Kenny; Taha, Mohamad; Stewart, Duncan J.

2018-01-01

There is considerable interest in the use of synthetic miRNA mimics (or inhibitors) as potential therapeutic agents in pulmonary vascular disease; however, the optimal delivery method to achieve high efficiency, selective lung targeting has not been determined. Here, we sought to investigate the relative merits of different lung-targeted strategies for delivering miRNA mimics in rats. Methods: Tissue levels of a synthetic miRNA mimic, cel-miR-39-3p (0.5 nmol in 50 µL invivofectamine/PBS vehicle) were compared in male rats (n=3 rats/method) after delivery by commonly used lung-targeting strategies including intratracheal liquid instillation (IT-L), intratracheal aerosolization with (IT-AV) or without ventilator assistance (IT-A), intranasal liquid instillation (IN-L) and intranasal aerosolization (IN-A). Intravenous (IV; via jugular vein), intraperitoneal (IP) and subcutaneous (SC) delivery served as controls. Relative levels of cel-miR-39 were quantified by RT-qPCR. Results: At 2 h post delivery, IT-L showed the highest lung mimic level, which was significantly higher than levels achieved by all other methods (from ~10- to 10,000-fold, p<0.05). Mimic levels remained detectable in the lung 24 h after delivery, but were 10- to 100-fold lower. The intrapulmonary distribution of cel-miR-39 was comparable when delivered as either a liquid or aerosol, with evidence of mimic distribution to both the left and right lung lobes and penetration to distal regions. All lung-targeted strategies showed lung-selective mimic uptake, with mimic levels 10- to 100-fold lower in heart and 100- to 10,000-fold lower in liver, kidney and spleen. In contrast, IV, SC and IP routes showed comparable or higher mimic levels in non-pulmonary tissues. Conclusions: miRNA uptake in the lungs differed markedly by up to 4 orders of magnitude, demonstrating that the choice of delivery strategy could have a significant impact on potential therapeutic outcomes in preclinical investigations of miRNA-based drug candidates. PMID:29507615

The Influence of Task and Personality Characteristics on Employee Turnover and Absenteeism Incidents.

DTIC Science & Technology

1981-01-01

E oc vc li.’ r .IIuaJry 1.981 Office of’ Nav;il Rcs,.il vh Q# ,. 4 ,lL1 , 0r4i gT...Ic It, toil ill Who, (-, o) r i n partC ~S lort’Iic L o i f. 111V llll~ of tIc Ul ilLI7 )LA . .. L: 0 I [Ile:; . Sb c ~ T c It A I 1’: 1 w1 -iid ex...UlmA ioctlt.y Vc v jn- Ilic . P’or c v i ) L c1) 1 W I S I I t’,.ItL IV e y 10r- ILI I L v J c o 1) t, )I c rflv or ind ah- - tce isi - W 4i e L

Cultural Resources Survey of the White Castle Revetment Item, Iberville, Parish, Louisiana.

DTIC Science & Technology

1987-03-06

I~ 14 iles10 1i~A’ Figue Exerp fro May ’ s 887 a2 2 th Stae o Louiiana sho ing he C nno Stoe T ~i7O -i*iion Libray Conress) 38 P 6 5 Lmr-%v o N*.-N ve...4 WJ ... , .1 K.1"c, 4 1, rr ,x -, -.’" 1-€ -MA Y’ . N.- - L / l ..h, S - CA .IS • r •---- s . eo l xaa sh.e,. Xh an nSo e (lp D v so ," ’ Libray of...ACCIPtCAT’S CATALOG NUMOEaR COELMN/PD-86/02 qAC~. I 4.L tITL9 (o &aWeWaJ* s . Type Or mEpOwr & PamIOo COvemeO Cultural Resources Survey of the White

Word Criticality Analysis. MOS: 57H. Skill Levels 1 & 2.

DTIC Science & Technology

1981-09-01

systul 642 SYSUOIJMP 641 * VSLTI 2’.1l 0 32 3136 FR Ps 140 UATAK3 SYS 711 0 -A4 n 01-9ni17 *yul PASJ1 0 a 111 131 F PS f%44 SYS97DII.7O?5A45.Rtvnnmf.𔃾FF...1- 21, 2 1-191, 1o slip S G 3- 131 , I c, 3- 12. 1 - SSt.IticlINr. 3- 68,7 3- 7,1 t Sw ITL - 3- 9,2 0o 41 I I 1-111 1 , W 3- )0:3 TILF 3A 11,1 1- 7, 1...4 1 r *,*9 4HASP-11.z,,-+I...Z ..END JCI 1 ..... 1.12.54 +,M 7 FEA 07 .... ROOM 540 .... TMERC1I7 .... L I5’.’T~jF .............. " r

Technology Insertion (TI)/Industrial Process Improvement (IPI). Task Order no. 1 (Misc Manufacturing). Book 3. Database Documentation Book for OO-ALC MANPWW. Main Landing Gear Except C5 - WCD’s

DTIC Science & Technology

1989-12-15

PIROIN ICt _IN6 tNUMooR 14 "PUN 1*0R1UE ARM ir~~Is 17-T - s gAraNO WORK~ t* *tACC@NPUSNCO66 MECHANIC -A * ~C/p MOVE 00201" 003iBEG 26 :060 STRIP CRM ...25SET UP SALLIEOIWILATHE -PRAW 0 4 ?ART 04962 0-143 0020 E AA-- 2.00 1ST PART IN-OUT SCLL OWC � .023 0030 R ITL-N1 2,00 NIKE 011 2 FLAT SIRFACES...13SEP83 NEW INPUT-NO OCC FACTOR HISTORY 0011 14NOV84 2 YR REVIEW W/NO CHANGE 0012 1811AR85 DOWN GRADED NOT MARKET BASKET 0013 25NOV85 CHANGED SUBOPS TO

Multi Jet Induced Forces and Moments on VTOL Aircraft Hovering in and Out of Ground Effect

DTIC Science & Technology

1977-06-19

It e01 L. h; Lilt’ IFe 1𔃺t MI 111)4t , tIpo Ia 1p ra’ue o r 11Iii (’t l I I ’ll I lit V 101 Of it I r, frinm. mit’ kd.own Fot) en us oeu t (I frOe-.1...protX 1111;1 L VIN, M( 0.25. Re fvrenru 5 de ITinus the ecl of ITle roa fcI Low rugilon andic tilL bg n 111lug Of t~he lXIsymmetnriC ca rgi a a11 I’oMtC...impIngement polnt. bC des .! gned as () Thtis dens:1ty Is used to determine NSI in Equation (31). lhe tLotti mass F-.ow il the madi a wo3. ~lcjet in an

On the half-life of luminescence signals in dosimetric applications: A unified presentation

NASA Astrophysics Data System (ADS)

Pagonis, V.; Kitis, G.; Polymeris, G. S.

2018-06-01

Luminescence signals from natural and man-made materials are widely used in dosimetric and dating applications. In general, there are two types of half-lives of luminescence signals which are of importance to experimental and modeling work in this research area. The first type of half-life is the time required for the population of the trapped charge in a single trap to decay to half its initial value. The second type of half-life is the time required for the luminescence intensity to drop to half of its initial value. While there a handful of analytical expressions available in the literature for the first type of half-life, there are no corresponding analytical expressions for the second type. In this work new analytical expressions are derived for the half-life of luminescence signals during continuous wave optical stimulation luminescence (CW-OSL) or isothermal luminescence (ITL) experiments. The analytical expressions are derived for several commonly used luminescence models which are based on delocalized transitions involving the conduction band: first and second order kinetics, empirical general order kinetics (GOK), mixed order kinetics (MOK) and the one-trap one-recombination center (OTOR) model. In addition, half-life expressions are derived for a different type of luminescence model, which is based on localized transitions in a random distribution of charges. The new half-life expressions contain two parts. The first part is inversely proportional to the thermal or optical excitation rate, and depends on the experimental conditions and on the cross section of the relevant luminescence process. The second part is characteristic of the optical and/or thermal properties of the material, as expressed by the parameters in the model. A new simple and quick method for analyzing luminescence signals is developed, and examples are given of applying the new method to a variety of dosimetric materials. The new test allows quick determination of whether a set of experimentally measured luminescence signals originate in a single trap, or in multiple traps.

A hydroclimatic threshold for landslide initiation on the North Shore Mountains of Vancouver, British Columbia

NASA Astrophysics Data System (ADS)

Jakob, Matthias; Weatherly, Hamish

2003-09-01

Landslides triggered by rainfall are the cause of thousands of deaths worldwide every year. One possible approach to limit the socioeconomic consequences of such events is the development of climatic thresholds for landslide initiation. In this paper, we propose a method that incorporates antecedent rainfall and streamflow data to develop a landslide initiation threshold for the North Shore Mountains of Vancouver, British Columbia. Hydroclimatic data were gathered for 18 storms that triggered landslides and 18 storms that did not. Discriminant function analysis separated the landslide-triggering storms from those storms that did not trigger landslides and selected the most meaningful variables that allow this separation. Discriminant functions were also developed for the landslide-triggering and nonlandslide-triggering storms. The difference of the discriminant scores, ΔCS, for both groups is a measure of landslide susceptibility during a storm. The variables identified that optimize the separation of the two storm groups are 4-week rainfall prior to a significant storm, 6-h rainfall during a storm, and the number of hours 1 m 3/s discharge was exceeded at Mackay Creek during a storm. Three thresholds were identified. The Landslide Warning Threshold (LWT) is reached when ΔCS is -1. The Conditional Landslide Initiation Threshold (CTL I) is reached when ΔCS is zero, and it implies that landslides are likely if 4 mm/h rainfall intensity is exceeded at which point the Imminent Landslide Initiation Threshold (ITL I) is reached. The LWT allows time for the issuance of a landslide advisory and to move personnel out of hazardous areas. The methodology proposed in this paper can be transferred to other regions worldwide where type and quality of data are appropriate for this type of analysis.

Chloride channels in cancer: Focus on chloride intracellular channel 1 and 4 (CLIC1 AND CLIC4) proteins in tumor development and as novel therapeutic targets.

PubMed

Peretti, Marta; Angelini, Marina; Savalli, Nicoletta; Florio, Tullio; Yuspa, Stuart H; Mazzanti, Michele

2015-10-01

In recent decades, growing scientific evidence supports the role of ion channels in the development of different cancers. Both potassium selective pores and chloride permeabilities are considered the most active channels during tumorigenesis. High rate of proliferation, active migration, and invasiveness into non-neoplastic tissues are specific properties of neoplastic transformation. All these actions require partial or total involvement of chloride channel activity. In this context, this class of membrane proteins could represent valuable therapeutic targets for the treatment of resistant tumors. However, this encouraging premise has not so far produced any valid new channel-targeted antitumoral molecule for cancer treatment. Problematic for drug design targeting ion channels is their vital role in normal cells for essential physiological functions. By targeting these membrane proteins involved in pathological conditions, it is inevitable to cause relevant side effects in healthy organs. In light of this, a new protein family, the chloride intracellular channels (CLICs), could be a promising class of therapeutic targets for its intrinsic individualities: CLIC1 and CLIC4, in particular, not only are overexpressed in specific tumor types or their corresponding stroma but also change localization and function from hydrophilic cytosolic to integral transmembrane proteins as active ionic channels or signal transducers during cell cycle progression in certain cases. These changes in intracellular localization, tissue compartments, and channel function, uniquely associated with malignant transformation, may offer a unique target for cancer therapy, likely able to spare normal cells. This article is part of a special issue itled "Membrane Channels and Transporters in Cancers." Copyright © 2015 Elsevier B.V. All rights reserved.

Steam sterilization effect on the accuracy of friction-style mechanical torque limiting devices.

PubMed

Sadr, Seyed Jalil; Fayyaz, Ali; Mahshid, Minoo; Saboury, Aboulfazl; Ansari, Ghassem

2014-01-01

This study was aimed to evaluate the effect of steam sterilization on the accuracy (within 10%) of friction-style mechanical torque limiting devices (F-S MTLDs) to achieve their target torque values. Fifteen new F-S MTLDs were selected from Astra Tech (25 Ncm, Hader SA, La Chaux-de-Fonds, Switzerland), BioHorizons (30 Ncm, Dynatorq ITL, Irvine, California, USA), Dr. Idhe (15-60 Ncm, Dr. Idhe Dental, Eching/Munich, Germany). Every peak torque measurement was tested ten times before steam sterilization using Tohnichi torque gauge (6Tohnichi-BTG (-S), Japan). Steam sterilization was performed using a 100 cycle autoclave. Preparation steps were carried out for the devices before each autoclave sterilization cycle. Peak torque measurements were repeated after every sterilization cycle. Mean difference between the measured and the targeted torque values were evaluated before and after aging. Repeated-measures of ANOVA were used to compare the differences of accuracy between subjects. Bonferroni post-hoc test was used for pairwise comparison. Autoclaving resulted in an increase in the error values (the difference between peak torque and target torque values) in all the three groups studied (P < 0.05), with only Astra Tech devices showing >10% (maximum 12%) difference from their torque values in 5% of the measurements. Steam sterilization effect differs between target torque and measured peak values with an increase trend. The peak torque values showed a significant decrease for BioHorizons, while a significant increase was noted for Astra Tech and no significant change in Dr. Idhe group after sterilization. Within the limitation of this study the torque output of each individual device deviated in varying degrees from target torque values. However, the majority of the new frictional-style devices tested in this study, delivered fairly consistent torque output within 10% of their preset target values after sterilization. Astra Tech devices were the only one showing more than 10% difference from their torque values in 5% of the measurements. Combined effects of sterilization and aging still needs to be determined.

Thermal and electron stimulated luminescence of natural bones, commercial hydroxyapatite and collagen.

PubMed

Roman-Lopez, J; Correcher, V; Garcia-Guinea, J; Rivera, T; Lozano, I B

2014-01-01

The luminescence (cathodoluminescence and thermoluminescence) properties of natural bones (Siberian mammoth and adult elephant), commercial hydroxyapatite and collagen were analyzed. Chemical analyses of the natural bones were determined using by Electron Probe Micro-Analysis (EMPA). Structural, molecular and thermal characteristics were determined by X-ray Diffraction (XRD), Raman spectroscopy and Differential Thermal and Thermogravimetric analysis (DTA-TG). Cathodoluminescence (CL) spectra of natural bones and collagen showed similar intense broad bands at 440 and 490 nm related to luminescence of the tetrahedral anion [Formula: see text] or structural defects. A weaker luminescence exhibited at 310 nm could be attributed to small amount of rare earth elements (REEs). Four luminescent bands at 378, 424, 468 and 576 nm were observed in the commercial hydroxyapatite (HAP). Both natural bones and collagen samples exhibited natural thermoluminescence (NTL) with well-defined glow curves whereas that the induced thermoluminescence (ITL) only appears in the samples of commercial hydroxyapatite and collagen. Additional explanations for the TL anomalous fading of apatite, as a crucial difficulty performing dosimetry and dating, are also considered. Copyright © 2013 Elsevier B.V. All rights reserved.

Geological setting of the Concordia Trench-Lake system in East Antarctica

NASA Astrophysics Data System (ADS)

Cianfarra, P.; Forieri, A.; Salvini, F.; Tabacco, I. E.; Zirizotti, A.

2009-06-01

This study presents the interpretation of radio echo-sounding (RES) data collected during the 2003 geophysical campaign of PNRA (Italian National Research Project in Antarctica), which focused on the exploration of the Concordia Trench-Lake system in East Antarctica. The data allow us to identify a new lake (ITL-28) at the southern edge of the Concordia Trench and a series of N-S trending subglacial troughs cutting through the Belgica Highlands. We have mapped the bedrock morphology at 3 km resolution, which led to an improved geographical and geomorphological characterization of the Concordia Trench, Concordia Ridge, Concordia Lake and South Hills. Improved knowledge of the Concordia Trench allowed us to model the 3-D geometry of the Concordia fault, suggesting that it played a role in governing the morpho-tectonic evolution of the bedrock in the Dome C region, and to propose a Cenozoic age for its activity. We recognize the importance of catchment basin morphology in hosting subglacial lakes, and discuss the role played by tectonics, glacial scouring and volcanism in the origin of the trench lakes, basin lakes and relief lakes, respectively.

[Building an effective nonlinear three-dimensional finite-element model of human thoracolumbar spine].

PubMed

Zeng, Zhi-Li; Cheng, Li-Ming; Zhu, Rui; Wang, Jian-Jie; Yu, Yan

2011-08-23

To build an effective nonlinear three-dimensional finite-element (FE) model of T(11)-L(3) segments for a further biomechanical study of thoracolumbar spine. The CT (computed tomography) scan images of healthy adult T(11)-L(3) segments were imported into software Simpleware 2.0 to generate a triangular mesh model. Using software Geomagic 8 for model repair and optimization, a solid model was generated into the finite element software Abaqus 6.9. The reasonable element C3D8 was selected for bone structures. Created between bony endplates, the intervertebral disc was subdivided into nucleus pulposus and annulus fibrosus (44% nucleus, 56% annulus). The nucleus was filled with 5 layers of 8-node solid elements and annulus reinforced by 8 crisscross collagenous fiber layers. The nucleus and annulus were meshed by C3D8RH while the collagen fibers meshed by two node-truss elements. The anterior (ALL) and posterior (PLL) longitudinal ligaments, flavum (FL), supraspinous (SSL), interspinous (ISL) and intertransverse (ITL) ligaments were modeled with S4R shell elements while capsular ligament (CL) was modeled with 3-node shell element. All surrounding ligaments were represented by envelope of 1 mm uniform thickness. The discs and bone structures were modeled with hyper-elastic and elasto-plastic material laws respectively while the ligaments governed by visco-elastic material law. The nonlinear three-dimensional finite-element model of T(11)-L(3) segments was generated and its efficacy verified through validating the geometric similarity and disc load-displacement and stress distribution under the impact of violence. Using ABAQUS/ EXPLICIT 6.9 the explicit dynamic finite element solver, the impact test was simulated in vitro. In this study, a 3-dimensional, nonlinear FE model including 5 vertebrae, 4 intervertebral discs and 7 ligaments consisted of 78 887 elements and 71 939 nodes. The model had good geometric similarity under the same conditions. The results of FEM intervertebral disc load-displacement curve were similar to those of in vitro test. The stress distribution results of vertebral cortical bone, posterior complex and cancellous bone were similar to those of other static experiments in a dynamic impact test under the observation of stress cloud. With the advantages of high geometric and mechanical similarity and complete thoracolumbar, hexahedral meshes, nonlinear finite element model may facilitate the impact loading test for a further dynamic analysis of injury mechanism for thoracolumbar burst fracture.

The dating and interpretation of a Mode 1 site in the Luangwa Valley, Zambia.

PubMed

Barham, Lawrence; Phillips, William M; Maher, Barbara A; Karloukovski, Vassil; Duller, Geoff A T; Jain, Mayank; Wintle, Ann G

2011-05-01

Flake based assemblages (Mode 1) comprise the earliest stone technologies known, with well-dated Oldowan sites occurring in eastern Africa between ~2.6-1.7 Ma, and in less securely dated contexts in central, southern and northern Africa. Our understanding of the spread and local development of this technology outside East Africa remains hampered by the lack of reliable numerical dating techniques applicable to non-volcanic deposits. This study applied the still relatively new technique of cosmogenic nuclide burial dating ((10)Be/(26)Al) to calculate burial ages for fluvial gravels containing Mode 1 artefacts in the Luangwa Valley, Zambia. The Manzi River, a tributary of the Luangwa River, has exposed a 4.7 m deep section of fluvial sands with discontinuous but stratified gravel layers bearing Mode 1, possibly Oldowan, artefacts in the basal layers. An unconformity divides the Manzi section, separating Mode 1 deposits from overlying gravels containing Mode 3 (Middle Stone Age) artefacts. No diagnostic Mode 2 (Acheulean) artefacts were found. Cosmogenic nuclide burial dating was attempted for the basal gravels as well as exposure ages for the upper Mode 3 gravels, but was unsuccessful. The complex depositional history of the site prevented the calculation of reliable age models. A relative chronology for the full Manzi sequence was constructed, however, from the magnetostratigraphy of the deposit (N>R>N sequence). Isothermal thermoluminescence (ITL) dating of the upper Mode 3 layers also provided consistent results (~78 ka). A coarse but chronologically coherent sequence now exists for the Manzi section with the unconformity separating probable mid- or early Pleistocene deposits below from late Pleistocene deposits above. The results suggest Mode 1 technology in the Luangwa Valley may post-date the Oldowan in eastern and southern Africa. The dating programme has contributed to a clearer understanding of the geomorphological processes that have shaped the valley and structured its archaeological record. Copyright © 2010 Elsevier Ltd. All rights reserved.

The dating and interpretation of a Mode 1 site in the Luangwa Valley, Zambia

USGS Publications Warehouse

Barham, L.; Phillips, W.M.; Maher, B.A.; Karloukovski, V.; Duller, G.A.T.; Jain, M.; Wintle, A.G.

2011-01-01

Flake based assemblages (Mode 1) comprise the earliest stone technologies known, with well-dated Oldowan sites occurring in eastern Africa between ??? 2.6-1.7 Ma, and in less securely dated contexts in central, southern and northern Africa. Our understanding of the spread and local development of this technology outside East Africa remains hampered by the lack of reliable numerical dating techniques applicable to non-volcanic deposits. This study applied the still relatively new technique of cosmogenic nuclide burial dating (10Be/26Al) to calculate burial ages for fluvial gravels containing Mode 1 artefacts in the Luangwa Valley, Zambia. The Manzi River, a tributary of the Luangwa River, has exposed a 4.7 m deep section of fluvial sands with discontinuous but stratified gravel layers bearing Mode 1, possibly Oldowan, artefacts in the basal layers. An unconformity divides the Manzi section, separating Mode 1 deposits from overlying gravels containing Mode 3 (Middle Stone Age) artefacts. No diagnostic Mode 2 (Acheulean) artefacts were found. Cosmogenic nuclide burial dating was attempted for the basal gravels as well as exposure ages for the upper Mode 3 gravels, but was unsuccessful. The complex depositional history of the site prevented the calculation of reliable age models. A relative chronology for the full Manzi sequence was constructed, however, from the magnetostratigraphy of the deposit (N>R>N sequence). Isothermal thermoluminescence (ITL) dating of the upper Mode 3 layers also provided consistent results (???78 ka). A coarse but chronologically coherent sequence now exists for the Manzi section with the unconformity separating probable mid- or early Pleistocene deposits below from late Pleistocene deposits above. The results suggest Mode 1 technology in the Luangwa Valley may post-date the Oldowan in eastern and southern Africa. The dating programme has contributed to a clearer understanding of the geomorphological processes that have shaped the valley and structured its archaeological record. ?? 2010 Elsevier Ltd.

Activity concentrations of ²²⁶Ra, ²³²Th and ⁴⁰K in brands of fertilisers used in Nigeria.

PubMed

Jibiri, N N; Fasae, K P

2012-01-01

The activity concentration of naturally occurring radionuclides ⁴⁰K, ²²⁶Ra and ²³²Th have been measured in different brands of fertiliser samples sold to farmers in retail markets in six commercial cities in southwestern Nigeria. Gamma ray spectroscopy was employed in the measurements of these radionuclides. The results of measurements showed that the average activity concentration of ⁴⁰K in the nitrogen, phosphorus and potassium fertilisers across the cities varied from 3972.0 ± 416.9 to 5089.3 ± 111.3 Bq kg⁻¹, 9.9 ± 7.3 to 450.6 ± 14.3 Bq kg⁻¹ for ²²⁶Ra, while for ²³²Th it varied from less than lower limit of detection to 15.1 ± 2.8 Bq kg⁻¹. The activity concentrations of ⁴⁰K, ²²⁶Ra and ²³²Th in single super phosphate (SSP) fertilisers and phosphate rocks were also determined. However, high activity concentrations of ²²⁶Ra were obtained in the SSP fertiliser and phosphate rocks and in particular, two brands of fertilisers from ITL/TAK and F & C companies. The values of the activity concentration of the radionuclides in the brands of fertilisers used in Nigeria are within the range of values reported in several other countries except ⁴⁰K.

Surface composition XPS analysis of a plasma treated polystyrene: Evolution over long storage periods.

PubMed

Ba, Ousmane M; Marmey, Pascal; Anselme, Karine; Duncan, Anthony C; Ponche, Arnaud

2016-09-01

A polystyrene surface (PS) was initially treated by cold nitrogen and oxygen plasma in order to incorporate in particular amine and hydroxyl functions, respectively. The evolution of the chemical nature of the surface was further monitored over a long time period (580 days) by chemical assay, XPS and contact angle measurements. Surface density quantification of primary amine groups was performed using three chemical amine assays: 4-nitrobenzaldehyde (4-NBZ), Sulfo succinimidyl 6-[3'(2 pyridyldithio)-pionamido] hexanoate (Sulfo-LC-SPDP) and iminothiolane (ITL). The results showed amine densities were in the range of 2 per square nanometer (comparable to the results described in the literature) after 5min of nitrogen plasma treatment. Over the time period investigated, chemical assays, XPS and contact angles suggest a drastic significant evolution of the chemical nature of the surface within the first two weeks. Beyond that time period and up to almost two years, nitrogen plasma modified substrates exhibits a slow and continuous oxidation whereas oxygen plasma modifed polystyrene surface is chemically stable after two weeks of storage. The latter appeared to "ease of" showing relatively mild changes within the one year period. Our results suggest that it may be preferable to wait for a chemical "stabilization" period of two weeks before subsequent covalent immobilization of proteins onto the surface. The originality of this work resides in the study of the plasma treated surface chemistry evolution over long periods of storage time (580 days) considerably exceeding those described in the literature. Copyright © 2016 Elsevier B.V. All rights reserved.

Surgical anatomy and histology of the levator palpebrae superioris muscle for blepharoptosis correction.

PubMed

Djordjević, Boban; Novaković, Marijan; Milisavljević, Milan; Milićević, Sasa; Maliković, Aleksandar

2013-12-01

The detailed knowledge of the architecture of the upper eyelid is very important in numerous upper eyelid corrective surgeries. The article deals with the detailed anatomy of the major components of the upper lid, which are commonly seen in surgical practice. This study was conducted on 19 human cadavers (12 adults and 7 infants) without pathologic changes in the orbital region and eyelids. Anatomic microdissection of the contents of the orbita was performed bilaterally on 12 orbits from 6 unfixed cadavers (3 male and 3 female). Micromorphologic investigations of the orbital tissue were performed on 8 en bloc excised and formalin-fixed orbits of infant cadavers. Specimens were fixed according to the Duvernoy method. An intra-arterial injection of 5% mixture of melt formalin and black ink was administered into the carotid arterial system. Using routine fixation, decalcination, dehydration, illumination, impregnation and molding procedures in paraplast, specimens were prepared for cross-sections. The measurement of the muscle length and diameter in situ in 6 nonfixed cadavers (12 orbits) showed an average length of the levator palpbrae superioris (LPS) muscle body of the 42.0 +/- 1.41 mm on the right, and 40.3 +/- 1.63 mm on the left side. In all the cases, the LPS had blood supply from 4 different arterial systems: the lacrimal, supratrochlear, and supraorbital artery and muscle branches of the ophthalmic artery. The LPS muscle in all the specimens was supplied by the superior medial branch of the oculomotor nerve. The connective tissue associated with the LPS muscle contains two transverse ligaments: the superior (Whitnall's) and intermuscular transverse ligaments (ITL). The orbital septum in all the specimens originated from the arcus marginalis of the frontal bone, and consisted of two layers--the superficial and the inner layer. In addition, a detailed histological analysis revealed that the upper eyelid's crease was formed by the conjoined fascia including the fascia of the orbicularis muscle, the superficial layer of the orbital septum, and the aponeurosis of the LPS muscle, as well as the pretarsal fascia. The conducted study provided a valuable morphological basis for biomechanical and clinical considerations regarding blepharoptosis surgery.

Recursive least-squares learning algorithms for neural networks

NASA Astrophysics Data System (ADS)

Lewis, Paul S.; Hwang, Jenq N.

1990-11-01

This paper presents the development of a pair of recursive least squares (ItLS) algorithms for online training of multilayer perceptrons which are a class of feedforward artificial neural networks. These algorithms incorporate second order information about the training error surface in order to achieve faster learning rates than are possible using first order gradient descent algorithms such as the generalized delta rule. A least squares formulation is derived from a linearization of the training error function. Individual training pattern errors are linearized about the network parameters that were in effect when the pattern was presented. This permits the recursive solution of the least squares approximation either via conventional RLS recursions or by recursive QR decomposition-based techniques. The computational complexity of the update is 0(N2) where N is the number of network parameters. This is due to the estimation of the N x N inverse Hessian matrix. Less computationally intensive approximations of the ilLS algorithms can be easily derived by using only block diagonal elements of this matrix thereby partitioning the learning into independent sets. A simulation example is presented in which a neural network is trained to approximate a two dimensional Gaussian bump. In this example RLS training required an order of magnitude fewer iterations on average (527) than did training with the generalized delta rule (6 1 BACKGROUND Artificial neural networks (ANNs) offer an interesting and potentially useful paradigm for signal processing and pattern recognition. The majority of ANN applications employ the feed-forward multilayer perceptron (MLP) network architecture in which network parameters are " trained" by a supervised learning algorithm employing the generalized delta rule (GDIt) [1 2]. The GDR algorithm approximates a fixed step steepest descent algorithm using derivatives computed by error backpropagatiori. The GDII algorithm is sometimes referred to as the backpropagation algorithm. However in this paper we will use the term backpropagation to refer only to the process of computing error derivatives. While multilayer perceptrons provide a very powerful nonlinear modeling capability GDR training can be very slow and inefficient. In linear adaptive filtering the analog of the GDR algorithm is the leastmean- squares (LMS) algorithm. Steepest descent-based algorithms such as GDR or LMS are first order because they use only first derivative or gradient information about the training error to be minimized. To speed up the training process second order algorithms may be employed that take advantage of second derivative or Hessian matrix information. Second order information can be incorporated into MLP training in different ways. In many applications especially in the area of pattern recognition the training set is finite. In these cases block learning can be applied using standard nonlinear optimization techniques [3 4 5].

Fuel Cell Development and Test Laboratory | Energy Systems Integration

Science.gov Websites

Facility | NREL Fuel Cell Development and Test Laboratory Fuel Cell Development and Test Laboratory The Energy System Integration Facility's Fuel Cell Development and Test Laboratory supports fuel a fuel cell test in the Fuel Cell Development and Test Laboratory. Capability Hubs The Fuel Cell

Test Analysis Guidelines

NASA Technical Reports Server (NTRS)

Jeng, Frank F.

2007-01-01

Development of analysis guidelines for Exploration Life Support (ELS) technology tests was completed. The guidelines were developed based on analysis experiences gained from supporting Environmental Control and Life Support System (ECLSS) technology development in air revitalization systems and water recovery systems. Analyses are vital during all three phases of the ELS technology test: pre-test, during test and post test. Pre-test analyses of a test system help define hardware components, predict system and component performances, required test duration, sampling frequencies of operation parameters, etc. Analyses conducted during tests could verify the consistency of all the measurements and the performance of the test system. Post test analyses are an essential part of the test task. Results of post test analyses are an important factor in judging whether the technology development is a successful one. In addition, development of a rigorous model for a test system is an important objective of any new technology development. Test data analyses, especially post test data analyses, serve to verify the model. Test analyses have supported development of many ECLSS technologies. Some test analysis tasks in ECLSS technology development are listed in the Appendix. To have effective analysis support for ECLSS technology tests, analysis guidelines would be a useful tool. These test guidelines were developed based on experiences gained through previous analysis support of various ECLSS technology tests. A comment on analysis from an experienced NASA ECLSS manager (1) follows: "Bad analysis was one that bent the test to prove that the analysis was right to begin with. Good analysis was one that directed where the testing should go and also bridged the gap between the reality of the test facility and what was expected on orbit."

Ares I Integrated Test Approach

NASA Technical Reports Server (NTRS)

Taylor, Jim

2008-01-01

This slide presentation reviews the testing approach that NASA is developing for the Ares I launch vehicle. NASA is planning a complete series of development, qualification and verification tests. These include: (1) Upper stage engine sea-level and altitude testing (2) First stage development and qualification motors (3) Upper stage structural and thermal development and qualification test articles (4) Main Propulsion Test Article (MPTA) (5) Upper stage green run testing (6) Integrated Vehicle Ground Vibration Testing (IVGVT) and (7) Aerodynamic characterization testing.

Advanced Turbine Technology Applications Project (ATTAP)

NASA Technical Reports Server (NTRS)

1993-01-01

The Advanced Turbine Technologies Application Project (ATTAP) is in the fifth year of a multiyear development program to bring the automotive gas turbine engine to a state at which industry can make commercialization decisions. Activities during the past year included reference powertrain design updates, test-bed engine design and development, ceramic component design, materials and component characterization, ceramic component process development and fabrication, ceramic component rig testing, and test-bed engine fabrication and testing. Engine design and development included mechanical design, combustion system development, alternate aerodynamic flow testing, and controls development. Design activities included development of the ceramic gasifier turbine static structure, the ceramic gasifier rotor, and the ceramic power turbine rotor. Material characterization efforts included the testing and evaluation of five candidate high temperature ceramic materials. Ceramic component process development and fabrication, with the objective of approaching automotive volumes and costs, continued for the gasifier turbine rotor, gasifier turbine scroll, extruded regenerator disks, and thermal insulation. Engine and rig fabrication, testing, and development supported improvements in ceramic component technology. Total test time in 1992 amounted to 599 hours, of which 147 hours were engine testing and 452 were hot rig testing.

Test development and use in five Iberian Latin American countries.

PubMed

Wechsler, Solange M; Oakland, Thomas; León, Carmem; Vivas, Eleonora; de Almeida, Leandro; Franco, Amanda; Pérez-Solís, María; Contini, Norma

2014-08-01

The abundance of scholarship on test development and use generally is higher in English-speaking than in Iberian Latin American countries. The purpose of this article is to help overcome this imbalance by describing and identifying similarities and differences in test development and use in two Iberian (Portugal and Spain) and three of the largest Latin American (Argentina, Brazil, and Venezuela) countries. The stages of test development in each country, roles of professional associations, presence of standards for test use, professionals' educational training, commonly used tests, together with prominent challenges to continued progress are discussed. Test development and use in these five countries are transitioning from a dependence on the use of translated tests to greater reliance on adapted and finally nationally constructed tests. Continued growth requires adherence to international standards guiding test development and use. Stronger alliance among professional associations in the Iberian Latin American countries could serve as a catalyst to promote test development in these regions. © 2014 International Union of Psychological Science.

Spacecraft Testing Programs: Adding Value to the Systems Engineering Process

NASA Technical Reports Server (NTRS)

Britton, Keith J.; Schaible, Dawn M.

2011-01-01

Testing has long been recognized as a critical component of spacecraft development activities - yet many major systems failures may have been prevented with more rigorous testing programs. The question is why is more testing not being conducted? Given unlimited resources, more testing would likely be included in a spacecraft development program. Striking the right balance between too much testing and not enough has been a long-term challenge for many industries. The objective of this paper is to discuss some of the barriers, enablers, and best practices for developing and sustaining a strong test program and testing team. This paper will also explore the testing decision factors used by managers; the varying attitudes toward testing; methods to develop strong test engineers; and the influence of behavior, culture and processes on testing programs. KEY WORDS: Risk, Integration and Test, Validation, Verification, Test Program Development

MBTA Green Line Tests - Riverside Line, December 1972 : Volume 1. Description.

DOT National Transportation Integrated Search

1973-09-01

The Urban Rail Supporting Technology Program emphasizes three major task areas; facilities development, technology development, and test program development. The test program development is composed of three sub-areas; vehicle testing, ways and struc...

MBTA Green Line Tests - Riverside Line, December 1972 : Volume 5. Gage Computer Printout.

DOT National Transportation Integrated Search

1973-01-01

The Urban Rail Supporting Technology Program emphasizes three major task areas; facilities development, technology development, and test program development. The test program development is composed of three sub-areas; vehicle testing, ways and struc...

MBTA Green Line Tests - Riverside Line, December 1972 : Volume 4. Westbound Track Profile.

DOT National Transportation Integrated Search

1973-01-01

The Urban Rail Supporting Technology Program emphasizes three major task areas; facilities development, technology development, and test program development. The test program development is composed of three sub-areas; vehicle testing, ways and struc...

MBTA Green Line Tests - Riverside Line, December 1972 : Volume 3. Eastbound Track Profile.

DOT National Transportation Integrated Search

1973-01-01

The Urban Rail Supporting Technology Program emphasizes three major task areas; facilities development, technology development, and test program development. The test program development is composed of three sub-areas; vehicle testing, ways and struc...

Investigation of the Factors Affecting the Pre-Test Effect in National Curriculum Science Assessment Development in England

ERIC Educational Resources Information Center

Pyle, Katie; Jones, Emily; Williams, Chris; Morrison, Jo

2009-01-01

Background: All national curriculum tests in England are pre-tested as part of the development process. Differences in pupil performance between pre-test and live test are consistently found. This difference has been termed the pre-test effect. Understanding the pre-test effect is essential in the test development and selection processes and in…

MBTA Green Line Tests - Riverside Line, December 1972 : Volume 2. Track Geometry Data Plots.

DOT National Transportation Integrated Search

1973-09-01

The Urban Rail Supporting Technology Program emphasizes three major task areas; facilities development, technology development, and test program development. The test program development is composed of three sub-areas; vehicle testing, ways and struc...

Agile Acceptance Test-Driven Development of Clinical Decision Support Advisories: Feasibility of Using Open Source Software.

PubMed

Basit, Mujeeb A; Baldwin, Krystal L; Kannan, Vaishnavi; Flahaven, Emily L; Parks, Cassandra J; Ott, Jason M; Willett, Duwayne L

2018-04-13

Moving to electronic health records (EHRs) confers substantial benefits but risks unintended consequences. Modern EHRs consist of complex software code with extensive local configurability options, which can introduce defects. Defects in clinical decision support (CDS) tools are surprisingly common. Feasible approaches to prevent and detect defects in EHR configuration, including CDS tools, are needed. In complex software systems, use of test-driven development and automated regression testing promotes reliability. Test-driven development encourages modular, testable design and expanding regression test coverage. Automated regression test suites improve software quality, providing a "safety net" for future software modifications. Each automated acceptance test serves multiple purposes, as requirements (prior to build), acceptance testing (on completion of build), regression testing (once live), and "living" design documentation. Rapid-cycle development or "agile" methods are being successfully applied to CDS development. The agile practice of automated test-driven development is not widely adopted, perhaps because most EHR software code is vendor-developed. However, key CDS advisory configuration design decisions and rules stored in the EHR may prove amenable to automated testing as "executable requirements." We aimed to establish feasibility of acceptance test-driven development of clinical decision support advisories in a commonly used EHR, using an open source automated acceptance testing framework (FitNesse). Acceptance tests were initially constructed as spreadsheet tables to facilitate clinical review. Each table specified one aspect of the CDS advisory's expected behavior. Table contents were then imported into a test suite in FitNesse, which queried the EHR database to automate testing. Tests and corresponding CDS configuration were migrated together from the development environment to production, with tests becoming part of the production regression test suite. We used test-driven development to construct a new CDS tool advising Emergency Department nurses to perform a swallowing assessment prior to administering oral medication to a patient with suspected stroke. Test tables specified desired behavior for (1) applicable clinical settings, (2) triggering action, (3) rule logic, (4) user interface, and (5) system actions in response to user input. Automated test suite results for the "executable requirements" are shown prior to building the CDS alert, during build, and after successful build. Automated acceptance test-driven development and continuous regression testing of CDS configuration in a commercial EHR proves feasible with open source software. Automated test-driven development offers one potential contribution to achieving high-reliability EHR configuration. Vetting acceptance tests with clinicians elicits their input on crucial configuration details early during initial CDS design and iteratively during rapid-cycle optimization. ©Mujeeb A Basit, Krystal L Baldwin, Vaishnavi Kannan, Emily L Flahaven, Cassandra J Parks, Jason M Ott, Duwayne L Willett. Originally published in JMIR Medical Informatics (http://medinform.jmir.org), 13.04.2018.

An Analysis and Plan of Test Development for the Law Enforcement Basic Training Course.

ERIC Educational Resources Information Center

Vineberg, Robert; Taylor, John E.

A test development plan is described to evaluate police enrolled in the law enforcement basic training course developed by California's Commission on Peace Officer Standards and Training (POST). Some general test methodologies are discussed: performance tests, knowledge tests, and situational tests, including role playing simulations and…

Development of a Work Control System for Propulsion Testing at Stennis Space Center (SSC)

NASA Technical Reports Server (NTRS)

Messer, Elizabeth A.

2004-01-01

In 1996, Stennis Space Center was given management authority for all Propulsion Testing for NASA. Over the next few years several research and development (R&D) test facilities were completed and brought up to full operation in what is known as the E-Complex Test Facility at Stennis Space Center. This paper will explain the requirements and steps taken to develop the current Test Operations' electronic work control system. The Work Control System developed includes work authorization documents such as test preparation sheets, discrepancy reports, pre-test briefing reports, and test requests.

Morpheus Lander Testing Campaign

NASA Technical Reports Server (NTRS)

Hart, Jeremy J.; Mitchell, Jennifer D.

2011-01-01

NASA s Morpheus Project has developed and tested a prototype planetary lander capable of vertical takeoff and landing designed to serve as a testbed for advanced spacecraft technologies. The Morpheus vehicle has successfully performed a set of integrated vehicle test flights including hot-fire and tether tests, ultimately culminating in an un-tethered "free-flight" This development and testing campaign was conducted on-site at the Johnson Space Center (JSC), less than one year after project start. Designed, developed, manufactured and operated in-house by engineers at JSC, the Morpheus Project represents an unprecedented departure from recent NASA programs and projects that traditionally require longer development lifecycles and testing at remote, dedicated testing facilities. This paper documents the integrated testing campaign, including descriptions of test types (hot-fire, tether, and free-flight), test objectives, and the infrastructure of JSC testing facilities. A major focus of the paper will be the fast pace of the project, rapid prototyping, frequent testing, and lessons learned from this departure from the traditional engineering development process at NASA s Johnson Space Center.

The Development and Structure of Professional Examinations Planned for National Use.

ERIC Educational Resources Information Center

Hecht, James T.

The process typically employed by testing services in developing professional tests for national use is described: (1) determination of professional standards; (2) development of test specifications; (3) test construction; (4) test registration and administration; and (5) scoring, analysis, and reporting. To determine professional standards, input…

International Guidelines on Computer-Based and Internet-Delivered Testing

ERIC Educational Resources Information Center

International Journal of Testing, 2006

2006-01-01

Developed by the International Test Commission, the International Guidelines on Computer-Based and Internet-Delivered Testing are a set of guidelines specifically developed to highlight good practice issues in relation to computer/Internet tests and testing. These guidelines have been developed from an international perspective and are directed at…

Integrated System Test Approaches for the NASA Ares I Crew Launch Vehicle

NASA Technical Reports Server (NTRS)

Cockrell, Charles

2008-01-01

NASA is maturing test and evaluation plans leading to flight readiness of the Ares I crew launch vehicle. Key development, qualification, and verification tests are planned . Upper stage engine sea-level and altitude testing. First stage development and qualification motors. Upper stage structural and thermal development and qualification test articles. Main Propulsion Test Article (MPTA). Upper stage green run testing. Integrated Vehicle Ground Vibration Testing (IVGVT). Aerodynamic characterization testing. Test and evaluation supports initial validation flights (Ares I-Y and Orion 1) and design certification.

Real time test bed development for power system operation, control and cyber security

NASA Astrophysics Data System (ADS)

Reddi, Ram Mohan

The operation and control of the power system in an efficient way is important in order to keep the system secure, reliable and economical. With advancements in smart grid, several new algorithms have been developed for improved operation and control. These algorithms need to be extensively tested and validated in real time before applying to the real electric power grid. This work focuses on the development of a real time test bed for testing and validating power system control algorithms, hardware devices and cyber security vulnerability. The test bed developed utilizes several hardware components including relays, phasor measurement units, phasor data concentrator, programmable logic controllers and several software tools. Current work also integrates historian for power system monitoring and data archiving. Finally, two different power system test cases are simulated to demonstrate the applications of developed test bed. The developed test bed can also be used for power system education.

27 CFR 25.196 - Removals for research, development or testing.

Code of Federal Regulations, 2010 CFR

2010-04-01

... beer removed for research, development, or testing in daily records under § 25.292 and on the Brewer's... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Removals for research... Analysis, Research, Development Or Testing § 25.196 Removals for research, development or testing. (a) A...

27 CFR 25.196 - Removals for research, development or testing.

Code of Federal Regulations, 2011 CFR

2011-04-01

... beer removed for research, development, or testing in daily records under § 25.292 and on the Brewer's... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Removals for research... Analysis, Research, Development Or Testing § 25.196 Removals for research, development or testing. (a) A...

Development of wheelchair caster testing equipment and preliminary testing of caster models

PubMed Central

Mhatre, Anand; Ott, Joseph

2017-01-01

Background Because of the adverse environmental conditions present in less-resourced environments (LREs), the World Health Organization (WHO) has recommended that specialised wheelchair test methods may need to be developed to support product quality standards in these environments. A group of experts identified caster test methods as a high priority because of their common failure in LREs, and the insufficiency of existing test methods described in the International Organization for Standardization (ISO) Wheelchair Testing Standards (ISO 7176). Objectives To develop and demonstrate the feasibility of a caster system test method. Method Background literature and expert opinions were collected to identify existing caster test methods, caster failures common in LREs and environmental conditions present in LREs. Several conceptual designs for the caster testing method were developed, and through an iterative process using expert feedback, a final concept and a design were developed and a prototype was fabricated. Feasibility tests were conducted by testing a series of caster systems from wheelchairs used in LREs, and failure modes were recorded and compared to anecdotal reports about field failures. Results The new caster testing system was developed and it provides the flexibility to expose caster systems to typical conditions in LREs. Caster failures such as stem bolt fractures, fork fractures, bearing failures and tire cracking occurred during testing trials and are consistent with field failures. Conclusion The new caster test system has the capability to incorporate necessary test factors that degrade caster quality in LREs. Future work includes developing and validating a testing protocol that results in failure modes common during wheelchair use in LRE. PMID:29062762

Development of protocols for confined extension/creep testing of geosynthetics for highway applications

DOT National Transportation Integrated Search

1998-03-01

This report presents the development and verification of a testing protocol and protocol equipment for confined extension testing and confined creep testing for geosynthetic reinforcement materials. The developed data indicate that confined response ...

Promoting the hydrostatic conceptual change test (HCCT) with four-tier diagnostic test item

NASA Astrophysics Data System (ADS)

Purwanto, M. G.; Nurliani, R.; Kaniawati, I.; Samsudin, A.

2018-05-01

Hydrostatic Conceptual Change Test (HCCT) is a diagnostic test instrument to identify students’ conception on Hydrostatic field. It is very important to support the learning process in the classroom. Based on that point of view, the researcher decided to develop HCCT instrument test into four-tier test diagnostic items. The resolve of this research is planned as the first step of four-tier test-formatted HCCT development as one of investigative test instrument on Hydrostatic. The research method used the 4D model which has four comprehensive steps: 1) defining, 2) designing, 3) developing and 4) disseminating. The instrument developed has been tried to 30 students in one of senior high schools. The data showed that four-tier- test-formatted HCCT is able to identify student’s conception level of Hydrostatic. In conclusion, the development of four-tier test-formatted HCCT is one of potential diagnostic test instrument that able to classify the category of students who misconception, no understanding, understanding, partial understanding and no codeable about concept of Hydrostatic.

Development of diagnostic test instruments to reveal level student conception in kinematic and dynamics

NASA Astrophysics Data System (ADS)

Handhika, J.; Cari, C.; Suparmi, A.; Sunarno, W.; Purwandari, P.

2018-03-01

The purpose of this research was to develop a diagnostic test instrument to reveal students' conceptions in kinematics and dynamics. The diagnostic test was developed based on the content indicator the concept of (1) displacement and distance, (2) instantaneous and average velocity, (3) zero and constant acceleration, (4) gravitational acceleration (5) Newton's first Law, (6) and Newton's third Law. The diagnostic test development model includes: Diagnostic test requirement analysis, formulating test-making objectives, developing tests, checking the validity of the content and the performance of reliability, and application of tests. The Content Validation Index (CVI) results in the category are highly relevant, with a value of 0.85. Three questions get negative Content Validation Ratio CVR) (-0.6), after revised distractors and clarify visual presentation; the CVR become 1 (highly relevant). This test was applied, obtained 16 valid test items, with Cronbach Alpha value of 0.80. It can conclude that diagnostic test can be used to reveal the level of students conception in kinematics and dynamics.

Advanced Turbine Technology Applications Project (ATTAP)

NASA Technical Reports Server (NTRS)

1992-01-01

ATTAP activities during the past year included test-bed engine design and development, ceramic component design, materials and component characterization, ceramic component process development and fabrication, ceramic component rig testing, and test-bed engine fabrication and testing. Significant technical challenges remain, but all areas exhibited progress. Test-bed engine design and development included engine mechanical design, combustion system design, alternate aerodynamic designs of gasifier scrolls, and engine system integration aimed at upgrading the AGT-5 from a 1038 C (1900 F) metal engine to a durable 1372 C (2500 F) structural ceramic component test-bed engine. ATTAP-defined ceramic and associated ceramic/metal component design activities completed include the ceramic gasifier turbine static structure, the ceramic gasifier turbine rotor, ceramic combustors, the ceramic regenerator disk, the ceramic power turbine rotors, and the ceramic/metal power turbine static structure. The material and component characterization efforts included the testing and evaluation of seven candidate materials and three development components. Ceramic component process development and fabrication proceeded for the gasifier turbine rotor, gasifier turbine scroll, gasifier turbine vanes and vane platform, extruded regenerator disks, and thermal insulation. Component rig activities included the development of both rigs and the necessary test procedures, and conduct of rig testing of the ceramic components and assemblies. Test-bed engine fabrication, testing, and development supported improvements in ceramic component technology that permit the achievement of both program performance and durability goals. Total test time in 1991 amounted to 847 hours, of which 128 hours were engine testing, and 719 were hot rig testing.

Fidelity of test development process within a national science grant

NASA Astrophysics Data System (ADS)

Brumfield, Teresa E.

In 2002, a math-science partnership (MSP) program was initiated by a national science grant. The purpose of the MSP program was to promote the development, implementation, and sustainability of promising partnerships among institutions of higher education, K-12 schools and school systems, as well as other important stakeholders. One of the funded projects included a teacher-scientist collaborative that instituted a professional development system to prepare teachers to use inquiry-based instructional modules. The MSP program mandated evaluations of its funded projects. One of the teacher-scientist collaborative project's outcomes specifically focused on teacher and student science content and process skills. In order to provide annual evidence of progress and to measure the impact of the project's efforts, and because no appropriate science tests were available to measure improvements in content knowledge of participating teachers and their students, the project contracted for the development of science tests. This dissertation focused on the process of test development within an evaluation and examined planned (i.e., expected) and actual (i.e., observed) test development, specifically concentrating on the factors that affected the actual test development process. Planned test development was defined as the process of creating tests according to the well-established test development procedures recommended by the AERA/APA/NCME 1999 Standards for Educational and Psychological Testing. Actual test development was defined as the process of creating tests as it actually took place. Because case study provides an in-depth, longitudinal examination of an event (i.e., case) in a naturalistic setting, it was selected as the appropriate methodology to examine the difference between planned and actual test development. The case (or unit of analysis) was the test development task, a task that was bounded by the context in which it occurred---and over which this researcher had no control---and by time. The purpose for studying the case was to gain a more in-depth, holistic understanding of the real-life test development task that took place within a project evaluation context. In particular, this case study investigated how the actual test development process was affected by: (1) the national and state (i.e., NC) science standards, (2) the NSF's definition of "evidence" in a project evaluation, (3) the MSP project's understanding of the role of the to-be-developed tests in their project evaluation, (4) the MSP project's understanding of the test development process, and (5) the MSP project's participants (e.g., teacher item-writers and scientists). From an investigation of this case, it was concluded that: (a) constructing psychometrically sound tests within an evaluation is not easy, (b) sufficient time and resources to construct such measures properly are seldom provided, and (c) test construction---at least within an evaluation---is not routine and unproblematic. Based upon the results from this case study, it was recommended that stakeholders (i.e., program managers, project directors, and evaluators) be familiar with the steps and standards used to develop psychometrically sound tests. Additionally, it was recommended that, for future research, a meta-analysis that examines only the test development process be conducted of all other MSP projects. A second suggested future research area was to establish a protocol that provides a systematic means by which to examine an existing or proposed MSP project for alignment with state science standards. Such a protocol would be cost-effective in that demonstrated alignment with state science standards would enable projects to use existing state science assessments, which must be in place, according to NCLB, by the 2007-2008 school year, to demonstrate student achievement. In this way, project directors and evaluators, typically with limited familiarity with the steps and standards by which psychometrically sound assessments are created, would not be placed in the role of test developer.

Job Specific Tests and an Overview of Research on Alternatives.

ERIC Educational Resources Information Center

MacLane, Charles N.; O'Leary, Brian S.

The development of job-specific tests (JSTs) for two occupations is discussed. A reading comprehension test and a mathematical reasoning test were developed for Customs Inspectors, and a reading comprehension test was developed for Social Security Claims workers. JST items incorporated reading samples or math problems from those found on the job.…

Development and testing of the Shenandoah collector

NASA Technical Reports Server (NTRS)

Kinoshita, G. S.

1981-01-01

The test and development of the 7-meter Shenandoah parabolic dish collector incorporating an FEK-244 film reflective surface and cavity receiver are described. Four prototypes tested in the midtemperature Solar System Test Facility indicate, with changes incorporated from these development tests, that the improvements should lead to predicted performance levels in the production collectors.

Developing energy and momentum conceptual survey (EMCS) with four-tier diagnostic test items

NASA Astrophysics Data System (ADS)

Afif, Nur Faadhilah; Nugraha, Muhammad Gina; Samsudin, Achmad

2017-05-01

Students' conceptions of work and energy are important to support the learning process in the classroom. For that reason, a diagnostic test instrument is needed to diagnose students' conception of work and energy. As a result, the researcher decided to develop Energy and Momentum Conceptual Survey (EMCS) instrument test into four-tier test diagnostic items. The purpose of this research is organized as the first step of four-tier test-formatted EMCS development as one of diagnostic test instruments on work and Energy. The research method used the 4D model (Defining, Designing, Developing and Disseminating). The instrument developed has been tested to 39 students in one of Senior High Schools. The resulting research showed that four-tier test-formatted EMCS is able to diagnose students' conception level of work and energy concept. It can be concluded that the development of four-tier test-formatted EMCS is one of potential diagnostic test instruments that able to obtain the category of students who understand concepts, misconceptions and do not understand about Work and Energy concept at all.

Overview of software development at the parabolic dish test site

NASA Technical Reports Server (NTRS)

Miyazono, C. K.

1985-01-01

The development history of the data acquisition and data analysis software is discussed. The software development occurred between 1978 and 1984 in support of solar energy module testing at the Jet Propulsion Laboratory's Parabolic Dish Test Site, located within Edwards Test Station. The development went through incremental stages, starting with a simple single-user BASIC set of programs, and progressing to the relative complex multi-user FORTRAN system that was used until the termination of the project. Additional software in support of testing is discussed including software in support of a meteorological subsystem and the Test Bed Concentrator Control Console interface. Conclusions and recommendations for further development are discussed.

Unmet clinical needs in cervical cancer screening.

PubMed

Rao, Jianyu; Escobar-Hoyos, Luisa; Shroyer, Kenneth R

2016-01-01

Cancer rates worldwide are expected to increase disproportionally in coming decades relative to the projected increase in population, especially in the developing world. The general unavailability of the Pap test and the cost of the HPV test in the developing world have precluded the deployment of effective cervical cancer screening programs in many developing countries. Recent improvements in testing technology arise from a need to overcome the significant limitations of the Pap test and HPV test, but results require first-world technology and validation. Developing countries, where cervical cancer remains one of the most important causes of cancer death, have the greatest need for an affordable, easy-to-use, and highly reliable cancer screening method that can return a diagnosis through efficient laboratory analysis or, more easily, at a woman's point of care. While research, testing, and vaccine improvements in recent years continue to lower the incidence of cervical cancer in some developed countries such as the U.S., HPV testing research needs to do more than test for the presence of virus. The tests must determine the presence and progression of cervical disease. Tests should be more sensitive and specific than Pap tests and Pap-related tests, and should be accurate in more than 90 percent of cases. Tests also need to be low-cost, objective, and easy to perform so screening programs can be widely implemented in developing countries where the need for a better cervical cancer screening test is highest. Such tests may be available through the recent advances in specific biomarkers of cervical cancer and multiplex detection technologies. Development of the next generation of cervical cancer tests that are more specific, sensitive, and informative than the traditional Pap or HPV test will make a significant impact on the reduction of cervical cancer worldwide.

The Design and Development of the Phillips-Patterson Test of Inference Ability in Reading Comprehension.

ERIC Educational Resources Information Center

Phillips, Linda M.

The design and development of a test of inference ability in reading comprehension for grades 6, 7, and 8 (the Phillips-Patterson Test of Inference Ability in Reading Comprehension) are described. After development of a contemporary theoretical framework for the test of inference ability in reading comprehension, the design, item development, and…

The 11th Space Simulation Conference

NASA Technical Reports Server (NTRS)

Bond, A. C. (Editor)

1980-01-01

Subject areas range from specialized issues dealing with the space and entry environments to the environmental testing of systems and complete spacecraft of present-day vintage. Various papers consider: the test and development of several key systems of the orbiter vehicle; integrated tests of complete satellites; new and unique test facilities developed to meet the demanding requirements of high fidelity simulation of test environments; and contamination species, including the instrumentation for detection and measurement of such. Special topics include improved thermal protection methodologies and approaches, sophisticated sensor developments, and other related testing and development areas.

Robotic Lunar Lander Development Project Status

NASA Technical Reports Server (NTRS)

Hammond, Monica; Bassler, Julie; Morse, Brian

2010-01-01

This slide presentation reviews the status of the development of a robotic lunar lander. The goal of the project is to perform engineering tests and risk reduction activities to support the development of a small lunar lander for lunar surface science. This includes: (1) risk reduction for the flight of the robotic lander, (i.e., testing and analyzing various phase of the project); (2) the incremental development for the design of the robotic lander, which is to demonstrate autonomous, controlled descent and landing on airless bodies, and design of thruster configuration for 1/6th of the gravity of earth; (3) cold gas test article in flight demonstration testing; (4) warm gas testing of the robotic lander design; (5) develop and test landing algorithms; (6) validate the algorithms through analysis and test; and (7) tests of the flight propulsion system.

78 FR 64153 - Policy Statement on the Principles for Development and Distribution of Annual Stress Test Scenarios

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-28

.... OCC-2012-0016] Policy Statement on the Principles for Development and Distribution of Annual Stress... in developing and distributing the stress test scenarios for the annual stress test required by the... by the Annual Stress Test final rule (Stress Test Rule) published on October 9, 2012. Under the...

Comparison of Psychomotor Development Screening Test and Clinical Assessment of Psychomotor Development

PubMed

Radmilović, Goranka; Matijević, Valentina; Zavoreo, Iris

2016-12-01

Numerous adverse factors are acting in the prenatal, perinatal and postnatal period of life and may be the cause of later mild or severe deviations from normal psychomotor development. Therefore, it is crucial to identify infants with neurological risk factors and infants that already have a delay from orderly development, in order to immediately initiate the rehabilitation process. The aim of this study was to determine whether there is difference in the assessment of psychomotor development in neurological risk children based on the psychomotor development test (Croatian, Razvoj psihomotorike, RPM test) and clinical evaluation of neuromotor development. RPM test is designed for rough estimate of psychomotor development in children in the first two years of life. The study included 15 full term children (8 male and 7 female) with clinical diagnosis of mild paraparesis and mild deviation from normal psychological and social development, and 15 full term children (8 male and 7 female) without neurological risk factors and deviations from normal psychomotor development, all at the age of 12-24 months. Of the 15 children diagnosed with mild paraparesis, none had delayed psychomotor development, 6.7% had suspect development and 93.3% had normal development on RPM test. All children in the control group had normal development on RPM test. According to the results, the RPM test is not sensitive enough to detect mild neurodevelopmental disorders.

Development and Application of a Two-Tier Diagnostic Test for High School Students' Understanding of Flowering Plant Growth and Development

ERIC Educational Resources Information Center

Lin, Sheau-Wen

2004-01-01

This study involved the development and application of a two-tier diagnostic test measuring students' understanding of flowering plant growth and development. The instrument development procedure had three general steps: defining the content boundaries of the test, collecting information on students' misconceptions, and instrument development.…

Design and development of a prototype wet oxidation system for the reclamation of water and the disposition of waste residues onboard space vehicles

NASA Technical Reports Server (NTRS)

Jagow, R. B.

1972-01-01

Laboratory investigations to define optimum process conditions for oxidation of fecal/urine slurries were conducted in a one-liter batch reactor. The results of these tests formed the basis for the design, fabrication, and testing of an initial prototype system, including a 100-hour design verification test. Areas of further development were identified during this test. Development of a high pressure slurry pump, materials corrosion studies, oxygen supply trade studies, comparison of salt removal water recovery devices, ammonia removal investigation, development of a solids grinder, reactor design studies and bearing life tests, and development of shutoff valves and a back pressure regulator were undertaken. The development work has progressed to the point where a prototype system suitable for manned chamber testing can be fabricated and tested with a high degree of confidence of success.

Interfacial strength development in thermoplastic resins and fiber-reinforced thermoplastic composites

NASA Technical Reports Server (NTRS)

Howes, Jeremy C.; Loos, Alfred C.

1987-01-01

An experimental program to develop test methods to be used to characterize interfacial (autohesive) strength development in polysulfone thermoplastic resin and graphite-polysulfone prepreg during processing is reported. Two test methods were used to examine interfacial strength development in neat resin samples. These included an interfacial tension test and a compact tension (CT) fracture toughness test. The interfacial tensile test proved to be very difficult to perform with a considerable amount of data scatter. Thus, the interfacial test was discarded in favor of the fracture toughness test. Interfacial strength development was observed by measuring the refracture toughness of precracked compact tension specimens that were rehealed at a given temperature and contact time. The measured refracture toughness was correlated with temperature and contact time. Interfacial strength development in graphite-polysulfone unidirectional composites was measured using a double cantilever beam (DCB) interlaminar fracture toughness test. The critical strain energy release rate of refractured composite specimens was measured as a function of healing temperature and contact time.

Test Driven Development of Scientific Models

NASA Technical Reports Server (NTRS)

Clune, Thomas L.

2012-01-01

Test-Driven Development (TDD) is a software development process that promises many advantages for developer productivity and has become widely accepted among professional software engineers. As the name suggests, TDD practitioners alternate between writing short automated tests and producing code that passes those tests. Although this overly simplified description will undoubtedly sound prohibitively burdensome to many uninitiated developers, the advent of powerful unit-testing frameworks greatly reduces the effort required to produce and routinely execute suites of tests. By testimony, many developers find TDD to be addicting after only a few days of exposure, and find it unthinkable to return to previous practices. Of course, scientific/technical software differs from other software categories in a number of important respects, but I nonetheless believe that TDD is quite applicable to the development of such software and has the potential to significantly improve programmer productivity and code quality within the scientific community. After a detailed introduction to TDD, I will present the experience within the Software Systems Support Office (SSSO) in applying the technique to various scientific applications. This discussion will emphasize the various direct and indirect benefits as well as some of the difficulties and limitations of the methodology. I will conclude with a brief description of pFUnit, a unit testing framework I co-developed to support test-driven development of parallel Fortran applications.

Space Shuttle SRM development. [Solid Rocket Motors

NASA Technical Reports Server (NTRS)

Brinton, B. C.; Kilminster, J. C.

1979-01-01

The successful static test of the fourth Development Space Shuttle Solid Rocket Motor (SRM) in February 1979 concluded the development testing phase of the SRM Project. Qualification and flight motors are currently being fabricated, with the first qualification motor to be static tested. Delivered thrust-time traces on all development motors were very close to predicted values, and both specific and total impulse exceeded specification requirements. 'All-up' static tests conducted with a solid rocket booster equipment on development motors achieved all test objectives. Transportation and support equipment concepts have been proven, baselining is complete, and component reusability has been demonstrated. Evolution of the SRM transportation support equipment, and special test equipment designs are reviewed, and development activities discussed. Handling and processing aspects of large, heavy components are described.

Brake testing methodology study : driver effects testing

DOT National Transportation Integrated Search

1999-03-01

The National Highway Traffic Safety Administration (NHTSA) is exploring the feasibility of developing brake tests to measure brake system performance of light vehicles. Developing test procedures requires controlling test variability so that measured...

CPAS Preflight Drop Test Analysis Process

NASA Technical Reports Server (NTRS)

Englert, Megan E.; Bledsoe, Kristin J.; Romero, Leah M.

2015-01-01

Throughout the Capsule Parachute Assembly System (CPAS) drop test program, the CPAS Analysis Team has developed a simulation and analysis process to support drop test planning and execution. This process includes multiple phases focused on developing test simulations and communicating results to all groups involved in the drop test. CPAS Engineering Development Unit (EDU) series drop test planning begins with the development of a basic operational concept for each test. Trajectory simulation tools include the Flight Analysis and Simulation Tool (FAST) for single bodies, and the Automatic Dynamic Analysis of Mechanical Systems (ADAMS) simulation for the mated vehicle. Results are communicated to the team at the Test Configuration Review (TCR) and Test Readiness Review (TRR), as well as at Analysis Integrated Product Team (IPT) meetings in earlier and intermediate phases of the pre-test planning. The ability to plan and communicate efficiently with rapidly changing objectives and tight schedule constraints is a necessity for safe and successful drop tests.

SWI 1.10 Testing Process

NASA Technical Reports Server (NTRS)

Stokes, LeBarian

2009-01-01

This procedure establishes a system for performing testing in the Six-Degree-Of-Freedom Dynamic Test System (SDTS). Testing includes development and verification testing of customer supplied Test Articles (TAs) and other testing requirements, as requested. This procedure applies to all SDTS testing operations and equipment. The procedure provides an overview of testing performed in the SDTS including test identification requirements, test planning and procedure development, test and performance inspection, test data analysis, and test report generation.

The development of a Flight Test Engineer's Workstation for the Automated Flight Test Management System

NASA Technical Reports Server (NTRS)

Tartt, David M.; Hewett, Marle D.; Duke, Eugene L.; Cooper, James A.; Brumbaugh, Randal W.

1989-01-01

The Automated Flight Test Management System (ATMS) is being developed as part of the NASA Aircraft Automation Program. This program focuses on the application of interdisciplinary state-of-the-art technology in artificial intelligence, control theory, and systems methodology to problems of operating and flight testing high-performance aircraft. The development of a Flight Test Engineer's Workstation (FTEWS) is presented, with a detailed description of the system, technical details, and future planned developments. The goal of the FTEWS is to provide flight test engineers and project officers with an automated computer environment for planning, scheduling, and performing flight test programs. The FTEWS system is an outgrowth of the development of ATMS and is an implementation of a component of ATMS on SUN workstations.

Draft Test Guideline: Daphnid Chronic Toxicity Test

EPA Pesticide Factsheets

The following draft test guideline is part of a series of test guidelines that have been developed by EPA for use in the testing of pesticides and toxic substances, and the development of test data for submission to the Agency for review.

Draft Test Guideline: Gammarid Acute Toxicity Test

EPA Pesticide Factsheets

The following draft test guideline is part of a series of test guidelines that have been developed by EPA for use in the testing of pesticides and toxic substances, and the development of test data for submission to the Agency for review.

Draft Test Guideline: Chironomid Sediment Toxicity Test

EPA Pesticide Factsheets

The following draft test guideline is part of a series of test guidelines that have been developed by EPA for use in the testing of pesticides and toxic substances, and the development of test data for submission to the Agency for review.

Draft Test Guideline: Mysid Acute Toxicity Test

EPA Pesticide Factsheets

The following draft test guideline is part of a series of test guidelines that have been developed by EPA for use in the testing of pesticides and toxic substances, and the development of test data for submission to the Agency for review.

Draft Test Guideline: Penaeid Acute Toxicity Test

EPA Pesticide Factsheets

The following draft test guideline is part of a series of test guidelines that have been developed by EPA for use in the testing of pesticides and toxic substances, and the development of test data for submission to the Agency for review.

Draft Test Guideline: Mysid Chronic Toxicity Test

EPA Pesticide Factsheets

The following draft test guideline is part of a series of test guidelines that have been developed by EPA for use in the testing of pesticides and toxic substances, and the development of test data for submission to the Agency for review.

Development of NASA's Sample Cartridge Assembly: Summary of GEDS Design, Development Testing, and Thermal Analyses

NASA Technical Reports Server (NTRS)

O'Connor, Brian; Hernandez, Deborah; Hornsby, Linda; Brown, Maria; Horton-Mullins, Kathryn

2017-01-01

Outline: Background of ISS (International Space Station) Material Science Research Rack; NASA SCA (Sample Cartridge Assembly) Design; GEDS (Gravitational Effects in Distortion in Sintering) Experiment Ampoule Design; Development Testing Summary; Thermal Modeling and Analysis. Summary: GEDS design development challenging (GEDS Ampoule design developed through MUGS (Microgravity) testing; Short duration transient sample processing; Unable to measure sample temperatures); MUGS Development testing used to gather data (Actual LGF (Low Gradient Furnace)-like furnace response; Provided sample for sintering evaluation); Transient thermal model integral to successful GEDS experiment (Development testing provided furnace response; PI (Performance Indicator) evaluation of sintering anchored model evaluation of processing durations; Thermal transient model used to determine flight SCA sample processing profiles).

Review of Motor Development, Perceptual-Motor and Physical Fitness Testing.

ERIC Educational Resources Information Center

Bundschuh, Ernest; And Others

Tests of motor development, perceptual-motor coordination, and physical fitness, for the retarded and non-retarded, are reviewed regarding their usage and administration. The tests reviewed are the: Denver Developmental Screening Test, Bayley Scales of Infant Development, Dayton Sensory Motor Awareness Survey, Minnetonka Physical Performance…

76 FR 27016 - Evaluating Test Procedures for Voting Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-10

...-02] Evaluating Test Procedures for Voting Systems AGENCY: National Institute of Standards and... Assistance Commission for use by NIST in research to develop and assess NIST's test procedures for voting... develop and assess NIST test protocols for voting equipment. NIST research is designed to: (1) Develop...

Developing a Measure of Behavior Change in a Program to Help Low-Income Parents Prevent Unhealthful Weight Gain in Children

ERIC Educational Resources Information Center

Dickin, Katherine L.; Lent, Megan; Lu, Angela H.; Sequeira, Joran; Dollahite, Jamie S.

2012-01-01

Objective: To develop and test a brief measure of changes in eating, active play, and parenting practices after an intervention to help parents shape children's choices and home environments. Design: Sequential phases of development and testing: expert panel review, cognitive testing interviews, field testing, test-retest study, and assessment of…

Automation of Flight Software Regression Testing

NASA Technical Reports Server (NTRS)

Tashakkor, Scott B.

2016-01-01

NASA is developing the Space Launch System (SLS) to be a heavy lift launch vehicle supporting human and scientific exploration beyond earth orbit. SLS will have a common core stage, an upper stage, and different permutations of boosters and fairings to perform various crewed or cargo missions. Marshall Space Flight Center (MSFC) is writing the Flight Software (FSW) that will operate the SLS launch vehicle. The FSW is developed in an incremental manner based on "Agile" software techniques. As the FSW is incrementally developed, testing the functionality of the code needs to be performed continually to ensure that the integrity of the software is maintained. Manually testing the functionality on an ever-growing set of requirements and features is not an efficient solution and therefore needs to be done automatically to ensure testing is comprehensive. To support test automation, a framework for a regression test harness has been developed and used on SLS FSW. The test harness provides a modular design approach that can compile or read in the required information specified by the developer of the test. The modularity provides independence between groups of tests and the ability to add and remove tests without disturbing others. This provides the SLS FSW team a time saving feature that is essential to meeting SLS Program technical and programmatic requirements. During development of SLS FSW, this technique has proved to be a useful tool to ensure all requirements have been tested, and that desired functionality is maintained, as changes occur. It also provides a mechanism for developers to check functionality of the code that they have developed. With this system, automation of regression testing is accomplished through a scheduling tool and/or commit hooks. Key advantages of this test harness capability includes execution support for multiple independent test cases, the ability for developers to specify precisely what they are testing and how, the ability to add automation, and the ability of the harness and cases to be executed continually. This test concept is an approach that can be adapted to support other projects.

Test Driven Development of Scientific Models

NASA Technical Reports Server (NTRS)

Clune, Thomas L.

2014-01-01

Test-Driven Development (TDD), a software development process that promises many advantages for developer productivity and software reliability, has become widely accepted among professional software engineers. As the name suggests, TDD practitioners alternate between writing short automated tests and producing code that passes those tests. Although this overly simplified description will undoubtedly sound prohibitively burdensome to many uninitiated developers, the advent of powerful unit-testing frameworks greatly reduces the effort required to produce and routinely execute suites of tests. By testimony, many developers find TDD to be addicting after only a few days of exposure, and find it unthinkable to return to previous practices.After a brief overview of the TDD process and my experience in applying the methodology for development activities at Goddard, I will delve more deeply into some of the challenges that are posed by numerical and scientific software as well as tools and implementation approaches that should address those challenges.

Development of a computerized visual search test.

PubMed

Reid, Denise; Babani, Harsha; Jon, Eugenia

2009-09-01

Visual attention and visual search are the features of visual perception, essential for attending and scanning one's environment while engaging in daily occupations. This study describes the development of a novel web-based test of visual search. The development information including the format of the test will be described. The test was designed to provide an alternative to existing cancellation tests. Data from two pilot studies will be reported that examined some aspects of the test's validity. To date, our assessment of the test shows that it discriminates between healthy and head-injured persons. More research and development work is required to examine task performance changes in relation to task complexity. It is suggested that the conceptual design for the test is worthy of further investigation.

Development and Characterization of Reference Materials for Genetic Testing: Focus on Public Partnerships.

PubMed

Kalman, Lisa V; Datta, Vivekananda; Williams, Mickey; Zook, Justin M; Salit, Marc L; Han, Jin Yeong

2016-11-01

Characterized reference materials (RMs) are needed for clinical laboratory test development and validation, quality control procedures, and proficiency testing to assure their quality. In this article, we review the development and characterization of RMs for clinical molecular genetic tests. We describe various types of RMs and how to access and utilize them, especially focusing on the Genetic Testing Reference Materials Coordination Program (Get-RM) and the Genome in a Bottle (GIAB) Consortium. This review also reinforces the need for collaborative efforts in the clinical genetic testing community to develop additional RMs.

On thermomechanical testing in support of constitutive equation development for high temperature alloys

NASA Technical Reports Server (NTRS)

Robinson, D. N.

1985-01-01

Three major categories of testing are identified that are necessary to provide support for the development of constitutive equations for high temperature alloys. These are exploratory, charactrization and verification tests. Each category is addressed and specific examples of each are given. An extensive, but not exhaustive, set of references is provided concerning pertinent experimental results and their relationships to theoretical development. This guide to formulating a meaningful testing effort in support of consitutive equation development can also aid in defining the necessary testing equipment and instrumentation for the establishment of a deformation and structures testing laboratory.

Agile Acceptance Test–Driven Development of Clinical Decision Support Advisories: Feasibility of Using Open Source Software

PubMed Central

Baldwin, Krystal L; Kannan, Vaishnavi; Flahaven, Emily L; Parks, Cassandra J; Ott, Jason M; Willett, Duwayne L

2018-01-01

Background Moving to electronic health records (EHRs) confers substantial benefits but risks unintended consequences. Modern EHRs consist of complex software code with extensive local configurability options, which can introduce defects. Defects in clinical decision support (CDS) tools are surprisingly common. Feasible approaches to prevent and detect defects in EHR configuration, including CDS tools, are needed. In complex software systems, use of test–driven development and automated regression testing promotes reliability. Test–driven development encourages modular, testable design and expanding regression test coverage. Automated regression test suites improve software quality, providing a “safety net” for future software modifications. Each automated acceptance test serves multiple purposes, as requirements (prior to build), acceptance testing (on completion of build), regression testing (once live), and “living” design documentation. Rapid-cycle development or “agile” methods are being successfully applied to CDS development. The agile practice of automated test–driven development is not widely adopted, perhaps because most EHR software code is vendor-developed. However, key CDS advisory configuration design decisions and rules stored in the EHR may prove amenable to automated testing as “executable requirements.” Objective We aimed to establish feasibility of acceptance test–driven development of clinical decision support advisories in a commonly used EHR, using an open source automated acceptance testing framework (FitNesse). Methods Acceptance tests were initially constructed as spreadsheet tables to facilitate clinical review. Each table specified one aspect of the CDS advisory’s expected behavior. Table contents were then imported into a test suite in FitNesse, which queried the EHR database to automate testing. Tests and corresponding CDS configuration were migrated together from the development environment to production, with tests becoming part of the production regression test suite. Results We used test–driven development to construct a new CDS tool advising Emergency Department nurses to perform a swallowing assessment prior to administering oral medication to a patient with suspected stroke. Test tables specified desired behavior for (1) applicable clinical settings, (2) triggering action, (3) rule logic, (4) user interface, and (5) system actions in response to user input. Automated test suite results for the “executable requirements” are shown prior to building the CDS alert, during build, and after successful build. Conclusions Automated acceptance test–driven development and continuous regression testing of CDS configuration in a commercial EHR proves feasible with open source software. Automated test–driven development offers one potential contribution to achieving high-reliability EHR configuration. Vetting acceptance tests with clinicians elicits their input on crucial configuration details early during initial CDS design and iteratively during rapid-cycle optimization. PMID:29653922

Development of a preprototype times wastewater recovery subsystem: Appendices

NASA Technical Reports Server (NTRS)

Roebelen, G. J., Jr.; Dehner, G. F.

1984-01-01

This Master Test Plan outlines the test program to be performed by Hamilton Standard during the Urine Water Recovery Subsystem Program. Testing is divided into three phases: (1) design support testing; development component testing; and acceptance testing. The completion of this test program verifies the subsystem operation.

A Study of Facilities and Infrastructure Planning, Prioritization, and Assessment at Federal Security Laboratories

DTIC Science & Technology

2012-11-01

Research , Development, Test , and Evaluation (RDT&E) Appropriations The RDT&E appropriation consists of the mission program budgets for all... research , development, test and evaluation work performed by contractors and government installations and includes an installations and activities budget...than $4,000,000. 9 f. Research , Development, Test , and Evaluation Appropriations The Research , Development, Test , and Evaluation (RDT&E

Draft Test Guideline: Tadpole/Sediment Subchronic Toxicity Test

EPA Pesticide Factsheets

The following draft test guideline is part of a series of test guidelines that have been developed by EPA for use in the testing of pesticides and toxic substances, and the development of test data for submission to the Agency for review.

Draft Test Guideline: Bivalve Acute Toxicity Test (Embryo Larval)

EPA Pesticide Factsheets

The following draft test guideline is part of a series of test guidelines that have been developed by EPA for use in the testing of pesticides and toxic substances, and the development of test data for submission to the Agency for review.

Draft Test Guideline: Field Testing For Aquatic Organisms

EPA Pesticide Factsheets

The following draft test guideline is part of a series of test guidelines that have been developed by EPA for use in the testing of pesticides and toxic substances, and the development of test data for submission to the Agency for review.

Draft Test Guideline: Oyster Acute Toxicity Test (Shell Deposition)

EPA Pesticide Factsheets

The following draft test guideline is part of a series of test guidelines that have been developed by EPA for use in the testing of pesticides and toxic substances, and the development of test data for submission to the Agency for review.

Draft Test Guideline: Site-Specific Aquatic Microcosm Test, Laboratory

EPA Pesticide Factsheets

The following draft test guideline is part of a series of test guidelines that have been developed by EPA for use in the testing of pesticides and toxic substances, and the development of test data for submission to the Agency for review.

Draft Test Guideline: Generic Freshwater Microcosm Test, Laboratory

EPA Pesticide Factsheets

The following draft test guideline is part of a series of test guidelines that have been developed by EPA for use in the testing of pesticides and toxic substances, and the development of test data for submission to the Agency for review.

Draft Test Guideline: Fish Early-Life Stage Toxicity Test

EPA Pesticide Factsheets

The following draft test guideline is part of a series of test guidelines that have been developed by EPA for use in the testing of pesticides and toxic substances, and the development of test data for submission to the Agency for review.

10 CFR 1021.212 - Research, development, demonstration, and testing.

Code of Federal Regulations, 2014 CFR

2014-01-01

... testing. (a) This section applies to the adoption and application of programs that involve research, development, demonstration, and testing for new technologies (40 CFR 1502.4(c)(3)). Adoption of such programs... 10 Energy 4 2014-01-01 2014-01-01 false Research, development, demonstration, and testing. 1021...

10 CFR 1021.212 - Research, development, demonstration, and testing.

Code of Federal Regulations, 2012 CFR

2012-01-01

... testing. (a) This section applies to the adoption and application of programs that involve research, development, demonstration, and testing for new technologies (40 CFR 1502.4(c)(3)). Adoption of such programs... 10 Energy 4 2012-01-01 2012-01-01 false Research, development, demonstration, and testing. 1021...

10 CFR 1021.212 - Research, development, demonstration, and testing.

Code of Federal Regulations, 2013 CFR

2013-01-01

... testing. (a) This section applies to the adoption and application of programs that involve research, development, demonstration, and testing for new technologies (40 CFR 1502.4(c)(3)). Adoption of such programs... 10 Energy 4 2013-01-01 2013-01-01 false Research, development, demonstration, and testing. 1021...

10 CFR 1021.212 - Research, development, demonstration, and testing.

Code of Federal Regulations, 2011 CFR

2011-01-01

... testing. (a) This section applies to the adoption and application of programs that involve research, development, demonstration, and testing for new technologies (40 CFR 1502.4(c)(3)). Adoption of such programs... 10 Energy 4 2011-01-01 2011-01-01 false Research, development, demonstration, and testing. 1021...

10 CFR 1021.212 - Research, development, demonstration, and testing.

Code of Federal Regulations, 2010 CFR

2010-01-01

... testing. (a) This section applies to the adoption and application of programs that involve research, development, demonstration, and testing for new technologies (40 CFR 1502.4(c)(3)). Adoption of such programs... 10 Energy 4 2010-01-01 2010-01-01 false Research, development, demonstration, and testing. 1021...

Summary of CPAS Gen II Parachute Analysis

NASA Technical Reports Server (NTRS)

Morris, Aaron L.; Bledsoe, Kristin J.; Fraire, Usbaldo, Jr.; Moore, James W.; Olson, Leah M.; Ray, Eric

2011-01-01

The Orion spacecraft is currently under development by NASA and Lockheed Martin. Like Apollo, Orion will use a series of parachutes to slow its descent and splashdown safely. The Orion parachute system, known as the CEV Parachute Assembly System (CPAS), is being designed by NASA, the Engineering and Science Contract Group (ESCG), and Airborne Systems. The first generation (Gen I) of CPAS testing consisted of thirteen tests and was executed in the 2007-2008 timeframe. The Gen I tests provided an initial understanding of the CPAS parachutes. Knowledge gained from Gen I testing was used to plan the second generation of testing (Gen II). Gen II consisted of six tests: three singleparachute tests, designated as Main Development Tests, and three Cluster Development Tests. Gen II required a more thorough investigation into parachute performance than Gen I. Higher fidelity instrumentation, enhanced analysis methods and tools, and advanced test techniques were developed. The results of the Gen II test series are being incorporated into the CPAS design. Further testing and refinement of the design and model of parachute performance will occur during the upcoming third generation of testing (Gen III). This paper will provide an overview of the developments in CPAS analysis following the end of Gen I, including descriptions of new tools and techniques as well as overviews of the Gen II tests.

Analog Design for Digital Deployment of a Serious Leadership Game

NASA Technical Reports Server (NTRS)

Maxwell, Nicholas; Lang, Tristan; Herman, Jeffrey L.; Phares, Richard

2012-01-01

This paper presents the design, development, and user testing of a leadership development simulation. The authors share lessons learned from using a design process for a board game to allow for quick and inexpensive revision cycles during the development of a serious leadership development game. The goal of this leadership simulation is to accelerate the development of leadership capacity in high-potential mid-level managers (GS-15 level) in a federal government agency. Simulation design included a mixed-method needs analysis, using both quantitative and qualitative approaches to determine organizational leadership needs. Eight design iterations were conducted, including three user testing phases. Three re-design iterations followed initial development, enabling game testing as part of comprehensive instructional events. Subsequent design, development and testing processes targeted digital application to a computer- and tablet-based environment. Recommendations include pros and cons of development and learner testing of an initial analog simulation prior to full digital simulation development.

Test Review: TestDaF

ERIC Educational Resources Information Center

Norris, John; Drackert, Anastasia

2018-01-01

The Test of German as a Foreign Language (TestDaF) plays a critical role as a standardized test of German language proficiency. Developed and administered by the Society for Academic Study Preparation and Test Development (g.a.s.t.), TestDaF was launched in 2001 and has experienced persistent annual growth, with more than 44,000 test takers in…

Development and Implementation of NASA's Lead Center for Rocket Propulsion Testing

NASA Technical Reports Server (NTRS)

Dawson, Michael C.

2001-01-01

With the new millennium, NASA's John C. Stennis Space Center (SSC) continues to develop and refine its role as rocket test service provider for NASA and the Nation. As Lead Center for Rocket Propulsion Testing (LCRPT), significant progress has been made under SSC's leadership to consolidate and streamline NASA's rocket test infrastructure and make this vital capability truly world class. NASA's Rocket Propulsion Test (RPT) capability consists of 32 test positions with a replacement value in excess of $2B. It is dispersed at Marshall Space Flight Center (MSFC), Johnson Space Center (JSC)-White Sands Test Facility (WSTF), Glenn Research Center (GRC)-Plum Brook (PB), and SSC and is sized appropriately to minimize duplication and infrastructure costs. The LCRPT also provides a single integrated point of entry into NASA's rocket test services. The RPT capability is managed through the Rocket Propulsion Test Management Board (RPTMB), chaired by SSC with representatives from each center identified above. The Board is highly active, meeting weekly, and is key to providing responsive test services for ongoing operational and developmental NASA and commercial programs including Shuttle, Evolved Expendable Launch Vehicle, and 2nd and 3rd Generation Reusable Launch Vehicles. The relationship between SSC, the test provider, and the hardware developers, like MSFC, is critical to the implementation of the LCRPT. Much effort has been expended to develop and refine these relationships with SSC customers. These efforts have met with success and will continue to be a high priority to SSC for the future. To data in the exercise of its role, the LCRPT has made 22 test assignments and saved or avoided approximately $51M. The LCRPT directly manages approximately $30M annually in test infrastructure costs including facility maintenance and upgrades, direct test support, and test technology development. This annual budges supports rocket propulsion test programs which have an annual budget in excess of $150M. As the LCRPT continues to develop, customer responsiveness and lower cost test services will be major themes. In that light, SSC is embarking on major test technology development activities ensuring long range goals of safer, more responsive, and more cost effective test services are realized. The LCRPT is also focusing on the testing requirements for advanced propulsion systems. This future planning is key to defining and fielding the ability to test these new technologies in support of the hardware developers.

New techniques for test development for tactical auto-pilots using microprocessors

NASA Astrophysics Data System (ADS)

Shemeta, E. H.

1980-07-01

This paper reports on a demonstration of the application of the method to generate system level tests for a typical tactical missile autopilot. The test algorithms are based on the autopilot control law. When loaded on the tester with appropriate control information, the complete autopilot is tested to establish if the specified control law requirements are met. Thus, the test procedure not only checks to see if the hardware is functional, but also checks the operational software. The technique also uses a 'learning' mode to allow minor timing or functional deviations from the expected responses to be incorporated in the test procedures. A potential application of this test development technique is the extraction of production test data for the various subassemblies. The technique will 'learn' the input-output patterns forming the basis for developement and production tests. If successful, these new techniques should allow the test development process to keep pace with semiconductor progress.

Draft Test Guideline: Aquatic Invetebrate Acute Toxicity, Test, Freshwater Daphnids

EPA Pesticide Factsheets

The following draft test guideline is part of a series of test guidelines that have been developed by EPA for use in the testing of pesticides and toxic substances, and the development of test data for submission to the Agency for review.

Draft Test Guideline: Fish Acute Toxicity Test, Freshwater And Marine

EPA Pesticide Factsheets

The following draft test guideline is part of a series of test guidelines that have been developed by EPA for use in the testing of pesticides and toxic substances, and the development of test data for submission to the Agency for review.

40 CFR 86.1829-01 - Durability and emission testing requirements; waivers.

Code of Federal Regulations, 2013 CFR

2013-07-01

... manufacturer's engineering evaluation of appropriate high-altitude emission testing, all light-duty vehicles... tests, development tests, or other appropriate information and good engineering judgment. (B) In lieu of... emission tests, development tests, or other appropriate information and good engineering judgment. (C) A...

A Boilerplate Capsule Test Technique for the Orion Parachute Test Program

NASA Technical Reports Server (NTRS)

Moore, James W.; Fraire, Usbaldo, Jr.

2013-01-01

The test program developing parachutes for the Orion/MPCV includes drop tests of a Parachute Test Vehicle designed to emulate the wake of the Orion capsule. Delivery of this test vehicle to the initial velocity, altitude, and orientation required for the test is a difficult problem involving multiple engineering disciplines. The available delivery of aircraft options imposed constraints on the test vehicle development and concept of operations. This paper describes the development of this test technique. The engineering challenges include the extraction from an aircraft and separation of two aerodynamically unstable vehicles, one of which will be delivered to a specific orientation with reasonably small rates. The desired attitude is achieved by precisely targeting the separation point using on-board monitoring of the motion. The design of the test vehicle is described. The trajectory simulations and other analyses used to develop this technique and predict the behavior of the test article are reviewed in detail. The application of the technique on several successful drop tests is summarized.

Miniature penetrator (MinPen) acceleration recorder development test

DOE Office of Scientific and Technical Information (OSTI.GOV)

Franco, R.J.; Platzbecker, M.R.

1998-08-01

The Telemetry Technology Development Department at Sandia National Laboratories actively develops and tests acceleration recorders for penetrating weapons. This new acceleration recorder (MinPen) utilizes a microprocessor-based architecture for operational flexibility while maintaining electronics and packaging techniques developed over years of penetrator testing. MinPen has been demonstrated to function in shock environments up to 20,000 Gs. The MinPen instrumentation development has resulted in a rugged, versatile, miniature acceleration recorder and is a valuable tool for penetrator testing in a wide range of applications.

To Develop and Test Improved Procedures for the Development and Distribution of Quality Individualized Mediated Instructional Materials in Vocational Education. Final Report.

ERIC Educational Resources Information Center

State Fair Community Coll., Sedalia, MO.

Five objectives are reported for a project to develop and test effective procedures for designing, field testing, reproducing, and disseminating individualized mediated instructional materials: (1) improvement of teacher input, (2) development of individualized instruction modules, (3) development of methodology for evaluating the effectiveness of…

Development and flight test of an experimental maneuver autopilot for a highly maneuverable aircraft

NASA Technical Reports Server (NTRS)

Duke, Eugene L.; Jones, Frank P.; Roncoli, Ralph B.

1986-01-01

This report presents the development of an experimental flight test maneuver autopilot (FTMAP) for a highly maneuverable aircraft. The essence of this technique is the application of an autopilot to provide precise control during required flight test maneuvers. This newly developed flight test technique is being applied at the Dryden Flight Research Facility of NASA Ames Research Center. The FTMAP is designed to increase the quantity and quality of data obtained in test flight. The technique was developed and demonstrated on the highly maneuverable aircraft technology (HiMAT) vehicle. This report describes the HiMAT vehicle systems, maneuver requirements, FTMAP development process, and flight results.

A high order approach to flight software development and testing

NASA Technical Reports Server (NTRS)

Steinbacher, J.

1981-01-01

The use of a software development facility is discussed as a means of producing a reliable and maintainable ECS software system, and as a means of providing efficient use of the ECS hardware test facility. Principles applied to software design are given, including modularity, abstraction, hiding, and uniformity. The general objectives of each phase of the software life cycle are also given, including testing, maintenance, code development, and requirement specifications. Software development facility tools are summarized, and tool deficiencies recognized in the code development and testing phases are considered. Due to limited lab resources, the functional simulation capabilities may be indispensable in the testing phase.

An Airborne Parachute Compartment Test Bed for the Orion Parachute Test Program

NASA Technical Reports Server (NTRS)

Moore, James W.; Romero, Leah M.

2013-01-01

The test program developing parachutes for the Orion/MPCV includes drop tests with parachutes deployed from an Orion-like parachute compartment at a wide range of dynamic pressures. Aircraft and altitude constraints precluded the use of an Orion boilerplate capsule for several test points. Therefore, a dart-shaped test vehicle with a hi-fidelity mock-up of the Orion parachute compartment has been developed. The available aircraft options imposed constraints on the test vehicle development and concept of operations. Delivery of this test vehicle to the desired velocity, altitude, and orientation required for the test is a di cult problem involving multiple engineering disciplines. This paper describes the development of the test technique. The engineering challenges include extraction from an aircraft, reposition of the extraction parachute, and mid-air separation of two vehicles, neither of which has an active attitude control system. The desired separation behavior is achieved by precisely controlling the release point using on-board monitoring of the motion. The design of the test vehicle is also described. The trajectory simulations and other analyses used to develop this technique and predict the behavior of the test vehicle are reviewed in detail. The application of the technique on several successful drop tests is summarized.

Development of delineator testing standard.

DOT National Transportation Integrated Search

2015-02-01

The objective of this project was to develop a new test method for evaluating the impact performance : of delineators for given applications. The researchers focused on developing a test method that was : reproducible and attempted to reproduce failu...

Development of a Computerized Visual Search Test

ERIC Educational Resources Information Center

Reid, Denise; Babani, Harsha; Jon, Eugenia

2009-01-01

Visual attention and visual search are the features of visual perception, essential for attending and scanning one's environment while engaging in daily occupations. This study describes the development of a novel web-based test of visual search. The development information including the format of the test will be described. The test was designed…

Identification and detection of anomalies through SSME data analysis

NASA Technical Reports Server (NTRS)

Pereira, Lisa; Ali, Moonis

1990-01-01

The goal of the ongoing research described in this paper is to analyze real-time ground test data in order to identify patterns associated with the anomalous engine behavior, and on the basis of this analysis to develop an expert system which detects anomalous engine behavior in the early stages of fault development. A prototype of the expert system has been developed and tested on the high frequency data of two SSME tests, namely Test #901-0516 and Test #904-044. The comparison of our results with the post-test analyses indicates that the expert system detected the presence of the anomalies in a significantly early stage of fault development.

Phase 2 STS new user development program. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Mcdowell, J. R.

1976-01-01

A methodology for developing new users for STS other than NASA and DoD, thereby maximizing the use of the STS system was developed. The approach to user development, reflected in the implementation plan, and attendant informational material to be used were evaluated by conducting a series of test cases with selected user organizations. These test case organizations were, in effect, used as consultants to evaluate the effectiveness, the needs, the completeness, and the adequacy of the user development approach and informational material. The selection of the test cases provided a variety of potential STS users covering industry, other government agencies, and the educational sector. The test cases covered various use areas and provided a mix of user organization types. A summary of the actual test cases conducted is given. The conduct of the test cases verified the general approach of the implementation plan, the validity of the user development strategy prepared for each test case organization and the effectiveness of the STS basic and user customized informational material.

One tool - one team: the marriage of test and operations in a low-budget spacecraft development

NASA Astrophysics Data System (ADS)

Finley, Charles J.

2006-05-01

The Air Force Research Laboratory's Space Vehicles Directorate (AFRL/VS) and the Department of Defense Space Test Program (STP) are two organizations that have partnered on more than 85 missions since 1968 to develop, launch, and operate Research and Development, Test and Evaluation space missions. As valuable as these missions have been to the follow-on generation of Operational systems, they are consistently under-funded and forced to execute on excessively ambitious development schedules. Due to these constraints, space mission development teams that serve the RDT&E community are faced with a number of unique technical and programmatic challenges. AFRL and STP have taken various approaches throughout the mission lifecycle to accelerate their development schedules, without sacrificing cost or system reliability. In the areas of test and operations, they currently employ one of two strategies. Historically, they have sought to avoid the added cost and complexity associated with coupled development schedules and segregated the spacecraft development and test effort from the ground operations system development and test effort. However, because these efforts have far more in common than they have differences, they have more recently attempted to pursue parallel I&T and Operations development and readiness efforts. This paper seeks to compare and contrast the "decoupled test and operations" approach, used by such missions as C/NOFS and Coriolis, with the "coupled test and operations" approach, adopted by the XSS-11 and TacSat-2 missions.

Thermal Vacuum Test of GLAS Propylene Loop Heat Pipe Development Model

NASA Technical Reports Server (NTRS)

Baker, Charles; Butler, Dan; Ku, Jentung; Kaya, Tarik; Nikitkin, Michael

2000-01-01

This paper presents viewgraphs on Thermal Vacuum Tests of the GLAS (Geoscience Laser Altimeter System) Propylene Loop Heat Pipe Development Model. The topics include: 1) Flight LHP System (Laser); 2) Test Design and Objectives; 3) DM (Development Model) LHP (Loop Heat Pipe) Test Design; 4) Starter Heater and Coupling Blocks; 5) CC Control Heaters and PRT; 6) Heater Plates (Shown in Reflux Mode); 7) Startup Tests; 8) CC Control Heater Power Tests for CC Temperature Control; and 9) Control Temperature Stability.

Advanced Turbine Technology Applications Project (ATTAP)

NASA Technical Reports Server (NTRS)

1990-01-01

Advanced Turbine Technology Application Project (ATTAP) activities during the past year were highlighted by test-bed engine design and development activities; ceramic component design; materials and component characterization; ceramic component process development and fabrication; component rig testing; and test-bed engine fabrication and testing. Although substantial technical challenges remain, all areas exhibited progress. Test-bed engine design and development activity included engine mechanical design, power turbine flow-path design and mechanical layout, and engine system integration aimed at upgrading the AGT-5 from a 1038 C metal engine to a durable 1371 C structural ceramic component test-bed engine. ATTAP-defined ceramic and associated ceramic/metal component design activities include: the ceramic combustor body, the ceramic gasifier turbine static structure, the ceramic gasifier turbine rotor, the ceramic/metal power turbine static structure, and the ceramic power turbine rotors. The materials and component characterization efforts included the testing and evaluation of several candidate ceramic materials and components being developed for use in the ATTAP. Ceramic component process development and fabrication activities are being conducted for the gasifier turbine rotor, gasifier turbine vanes, gasifier turbine scroll, extruded regenerator disks, and thermal insulation. Component rig testing activities include the development of the necessary test procedures and conduction of rig testing of the ceramic components and assemblies. Four-hundred hours of hot gasifier rig test time were accumulated with turbine inlet temperatures exceeding 1204 C at 100 percent design gasifier speed. A total of 348.6 test hours were achieved on a single ceramic rotor without failure and a second ceramic rotor was retired in engine-ready condition at 364.9 test hours. Test-bed engine fabrication, testing, and development supported improvements in ceramic component technology that will permit the achievement of program performance and durability goals. The designated durability engine accumulated 359.3 hour of test time, 226.9 of which were on the General Motors gas turbine durability schedule.

Test selection, adaptation, and evaluation: a systematic approach to assess nutritional influences on child development in developing countries.

PubMed

Prado, Elizabeth L; Hartini, Sri; Rahmawati, Atik; Ismayani, Elfa; Hidayati, Astri; Hikmah, Nurul; Muadz, Husni; Apriatni, Mandri S; Ullman, Michael T; Shankar, Anuraj H; Alcock, Katherine J

2010-03-01

Evaluating the impact of nutrition interventions on developmental outcomes in developing countries can be challenging since most assessment tests have been produced in and for developed country settings. Such tests may not be valid measures of children's abilities when used in a new context. We present several principles for the selection, adaptation, and evaluation of tests assessing the developmental outcomes of nutrition interventions in developing countries where standard assessment tests do not exist. We then report the application of these principles for a nutrition trial on the Indonesian island of Lombok. Three hundred children age 22-55 months in Lombok participated in a series of pilot tests for the purpose of test adaptation and evaluation. Four hundred and eighty-seven 42-month-old children in Lombok were tested on the finalized test battery. The developmental assessment tests were adapted to the local context and evaluated for a number of psychometric properties, including convergent and discriminant validity, which were measured based on multiple regression models with maternal education, depression, and age predicting each test score. The adapted tests demonstrated satisfactory psychometric properties and the expected pattern of relationships with the three maternal variables. Maternal education significantly predicted all scores but one, maternal depression predicted socio-emotional competence, socio-emotional problems, and vocabulary, while maternal age predicted socio-emotional competence only. Following the methodological principles we present resulted in tests that were appropriate for children in Lombok and informative for evaluating the developmental outcomes of nutritional supplementation in the research context. Following this approach in future studies will help to determine which interventions most effectively improve child development in developing countries.

Draft Test Guideline: Fish Bioconcentration Factor (BCF)

EPA Pesticide Factsheets

The following draft test guideline is part of a series of test guidelines that have been developed by EPA for use in the testing of pesticides and toxic substances, and the development of test data for submission to the Agency for review.

Draft Test Guideline: Oyster Bioconcentration Factor (BCF)

EPA Pesticide Factsheets

The following draft test guideline is part of a series of test guidelines that have been developed by EPA for use in the testing of pesticides and toxic substances, and the development of test data for submission to the Agency for review.

Draft Test Guideline: Fish Life Cycle Toxicity

EPA Pesticide Factsheets

The following draft test guideline is part of a series of test guidelines that have been developed by EPA for use in the testing of pesticides and toxic substances, and the development of test data for submission to the Agency for review.

Draft Test Guideline: Aquatic Food Chain Transfer

EPA Pesticide Factsheets

The following draft test guideline is part of a series of test guidelines that have been developed by EPA for use in the testing of pesticides and toxic substances, and the development of test data for submission to the Agency for review.

Hot-spot heating susceptibility due to reverse bias operating conditions

NASA Technical Reports Server (NTRS)

Gonzalez, C. C.

1985-01-01

Because of field experience (indicating that cell and module degradation could occur as a result of hot spot heating), a laboratory test was developed at JPL to determine hot spot susceptibility of modules. The initial hot spot testing work at JPL formed a foundation for the test development. Test parameters are selected as follows. For high shunt resistance cells, the applied back bias test current is set equal to the test cell current at maximum power. For low shunt resistance cells, the test current is set equal to the cell short circuit current. The shadow level is selected to conform to that which would lead to maximum back bias voltage under the appropriate test current level. The test voltage is determined by the bypass diode frequency. The test conditions are meant to simulate the thermal boundary conditions for 100 mW/sq cm, 40C ambient environment. The test lasts 100 hours. A key assumption made during the development of the test is that no current imbalance results from the connecting of multiparallel cell strings. Therefore, the test as originally developed was applicable for single string case only.

77 FR 13329 - Pandemic Influenza Vaccines-Amendment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-06

... Secretary must consider the desirability of encouraging the design, development, clinical testing or... manufacture, testing, development, distribution, administration, or use of one or more Covered Countermeasures... in the design, development, clinical testing, investigation or manufacturing of a Covered...

Computerized Adaptive Screening Test (CAST): Development for Use in Military Recruiting Stations

DTIC Science & Technology

1984-01-01

testing ( CAT ) 20. ABSTRACT (Continuo on rover .. efdo II neco .. ., ond Identity bJ’ 11/oclr -llor) The Computerized Adaptive Screening Test (CAST...effort is in progress to develop a computerized adaptive testing ( CAT ) system and to evaluate its potential for use in the military entrance...U.S. Marine Corps) has been designated as lead service for CAT system development; and the Navy Personnel Research and Development Center, as lead

Development and Evaluation of Reproductive and Developmental Toxicity Tests for Assessing the Hazards of Environmental Contaminants

DTIC Science & Technology

1997-08-01

AL/EQ-TR-1997-0050 DEVELOPMENT AND EVALUATION OF REPRODUCTIVE AND DEVELOPMENT TOXICITY TESTS FOR ASSESSING THE HAZARDS OF ENVIRONMENTAL...SUBTITLE Development and Evaluation of Reproductive and Developmental Toxicity Tests for Assessing the Hazards of Environmental Contaminants 6...pd in testing toxicity in surface waters, ground waters and H- ™t™j£J^^^M hazard assessment when used in conjunction in sediments. FETAX can be usea

The development, design and test of a 66 W/kg (30-W/lb) roll-up solar array

NASA Technical Reports Server (NTRS)

Hasbach, W. A.; Ross, R. G., Jr.

1972-01-01

A program to develop a 250 square foot roll-up solar array with a power-to-weight ratio exceeding 30 watts per pound is described. The system design and fabrication of a full scale engineering development model are discussed. The system and development test program results are presented. Special test equipment and test procedures are included, together with comparisons of experimental and analytical results.

Manned remote work station development article. Volume 3: Development test plan. Appendix A: Manufacturing requirements/schedule

NASA Technical Reports Server (NTRS)

1979-01-01

The tests and procedures for the manned remote work station (MRWS) open cherry picker (OCP) development test article (DTA) are described to validate systems requirements and performance specifications. A development test program is outlined to evaluate key design issues and man/machine interfaces when the MRWS OCP is used in a shuttle support role of satellite servicing and in orbit construction of large structures.

Advanced Control Surface Seal Development at NASA GRC for Future Space Launch Vehicles

NASA Technical Reports Server (NTRS)

Dunlap, Patrick H., Jr.; Steinetz, Bruce M.; DeMange, Jeffrey J.

2003-01-01

NASA s Glenn Research Center (GRC) is developing advanced control surface seal technologies for future space launch vehicles as part of the Next Generation Launch Technology project (NGLT). New resilient seal designs are currently being fabricated and high temperature seal preloading devices are being developed as a means of improving seal resiliency. GRC has designed several new test rigs to simulate the temperatures, pressures, and scrubbing conditions that seals would have to endure during service. A hot compression test rig and hot scrub test rig have been developed to perform tests at temperatures up to 3000 F. Another new test rig allows simultaneous seal flow and scrub tests at room temperature to evaluate changes in seal performance with scrubbing. These test rigs will be used to evaluate the new seal designs. The group is also performing tests on advanced TPS seal concepts for Boeing using these new test facilities.

Integrated Vehicle Ground Vibration Testing of Manned Spacecraft: Historical Precedent

NASA Technical Reports Server (NTRS)

Lemke, Paul R.; Tuma, Margaret L.; Askins, Bruce R.

2008-01-01

For the first time in nearly 30 years, NASA is developing a new manned space flight launch system. The Ares I will carry crew and cargo to not only the International Space Station, but onward for the future exploration of the Moon and Mars. The Ares I control system and structural designs use complex computer models for their development. An Integrated Vehicle Ground Vibration Test (IVGVT) will validate the efficacy of these computer models. The IVGVT will reduce the technical risk of unexpected conditions that could place the vehicle or crew in jeopardy. The Ares Project Office's Flight and Integrated Test Office commissioned a study to determine how historical programs, such as Saturn and Space Shuttle, validated the structural dynamics of an integrated flight vehicle. The study methodology was to examine the historical record and seek out members of the engineering community who recall the development of historic manned launch vehicles. These records and interviews provided insight into the best practices and lessons learned from these historic development programs. The information that was gathered allowed the creation of timelines of the historic development programs. The timelines trace the programs from the development of test articles through test preparation, test operations, and test data reduction efforts. These timelines also demonstrate how the historical tests fit within their overall vehicle development programs. Finally, the study was able to quantify approximate staffing levels during historic development programs. Using this study, the Flight and Integrated Test Office was able to evaluate the Ares I Integrated Vehicle Ground Vibration Test schedule and workforce budgets in light of the historical precedents to determine if the test had schedule or cost risks associated with it.

Stirling Space Engine Program. Volume 2; Appendixes A, B, C and D

NASA Technical Reports Server (NTRS)

Dhar, Manmohan

1999-01-01

The objective of this program was to develop the technology necessary for operating Stirling power converters in a space environment and to demonstrate this technology in full-scale engine tests. Volume 2 of the report includes the following appendices: Appendix A: Heater Head Development (Starfish Heater Head Program, 1/10th Segment and Full-Scale Heat Pipes, and Sodium Filling and Processing); Appendix B: Component Test Power Converter (CTPC) Component Development (High-temperature Organic Materials, Heat Exchanger Fabrication, Beryllium Issues, Sodium Issues, Wear Couple Tests, Pressure Boundary Penetrations, Heating System Heaters, and Cooler Flow Test); Appendix C: Udimet Testing (Selection of the Reference Material for the Space Stirling Engine Heater Head, Udimet 720LI Creep Test Result Update, Final Summary of Space Stirling Endurance Engine Udimet 720L1 Fatigue Testing Results, Udimet 720l1 Weld Development Summary, and Udimet 720L1 Creep Test Final Results Summary), and Appendix D: CTPC Component Development Photos.

Test Driven Development: Lessons from a Simple Scientific Model

NASA Astrophysics Data System (ADS)

Clune, T. L.; Kuo, K.

2010-12-01

In the commercial software industry, unit testing frameworks have emerged as a disruptive technology that has permanently altered the process by which software is developed. Unit testing frameworks significantly reduce traditional barriers, both practical and psychological, to creating and executing tests that verify software implementations. A new development paradigm, known as test driven development (TDD), has emerged from unit testing practices, in which low-level tests (i.e. unit tests) are created by developers prior to implementing new pieces of code. Although somewhat counter-intuitive, this approach actually improves developer productivity. In addition to reducing the average time for detecting software defects (bugs), the requirement to provide procedure interfaces that enable testing frequently leads to superior design decisions. Although TDD is widely accepted in many software domains, its applicability to scientific modeling still warrants reasonable skepticism. While the technique is clearly relevant for infrastructure layers of scientific models such as the Earth System Modeling Framework (ESMF), numerical and scientific components pose a number of challenges to TDD that are not often encountered in commercial software. Nonetheless, our experience leads us to believe that the technique has great potential not only for developer productivity, but also as a tool for understanding and documenting the basic scientific assumptions upon which our models are implemented. We will provide a brief introduction to test driven development and then discuss our experience in using TDD to implement a relatively simple numerical model that simulates the growth of snowflakes. Many of the lessons learned are directly applicable to larger scientific models.

Test Planning Approach and Lessons

NASA Technical Reports Server (NTRS)

Parkinson, Douglas A.; Brown, Kendall K.

2004-01-01

As NASA began technology risk reduction activities and planning for the next generation launch vehicle under the Space Launch Initiative (SLI), now the Next Generation Launch Technology (NGLT) Program, a review of past large liquid rocket engine development programs was performed. The intent of the review was to identify any significant lessons from the development testing programs that could be applied to current and future engine development programs. Because the primary prototype engine in design at the time of this study was the Boeing-Rocketdyne RS-84, the study was slightly biased towards LOX/RP-1 liquid propellant engines. However, the significant lessons identified are universal. It is anticipated that these lessons will serve as a reference for test planning in the Engine Systems Group at Marshall Space Flight Center (MSFC). Towards the end of F-1 and J-2 engine development testing, NASA/MSFC asked Rocketdyne to review those test programs. The result was a document titled, Study to Accelerate Development by Test of a Rocket Engine (R-8099). The "intent (of this study) is to apply this thinking and learning to more efficiently develop rocket engines to high reliability with improved cost effectivenes" Additionally, several other engine programs were reviewed - such as SSME, NSTS, STME, MC-1, and RS-83- to support or refute the R-8099. R-8099 revealed two primary lessons for test planning, which were supported by the other engine development programs. First, engine development programs can benefit from arranging the test program for engine system testing as early as feasible. The best test for determining environments is at the system level, the closest to the operational flight environment. Secondly, the component testing, which tends to be elaborate, should instead be geared towards reducing risk to enable system test. Technical risk can be reduced at the component level, but the design can only be truly verified and validated after engine system testing.

The challenge of cross-cultural assessment--The Test of Ability To Explain for Zulu-speaking Children.

PubMed

Solarsh, Barbara; Alant, Erna

2006-01-01

A culturally appropriate test, The Test of Ability To Explain for Zulu-speaking Children (TATE-ZC), was developed to measure verbal problem solving skills of rural, Zulu-speaking, primary school children. Principles of 'non-biased' assessment, as well as emic (culture specific) and etic (universal) aspects of intelligence formed the theoretical backdrop. In addition, specific principles relating to test translation; test content; culturally appropriate stimulus material; scoring procedures and test administration were applied. Five categories of abstract thinking skills formed the basis of the TATE-ZC. These were: (a) Explaining Inferences, (b) Determining Cause, (c) Negative Why Questions, (d) Determining Solutions and (e) Avoiding Problem. The process of test development underwent three pilot studies. Results indicate that the TATE-ZC is a reliable and valid test for the target population. A critical analysis of the efficacy of creating a test of verbal reasoning for children from the developing world concludes the article. As a result of this activity (1) the participant will have a clearer understanding of the principles that need to be followed when developing culturally appropriate test material; (2) the participant will understand the process of developing culturally appropriate test material for non-mainstream cultures; (3) the participant will be able to apply the process and principles to other cross-cultural testing situations.

Draft Test Guideline: Whole Sediment Acute Toxicity Invertebrates, Freshwater

EPA Pesticide Factsheets

The following draft test guideline is part of a series of test guidelines that have been developed by EPA for use in the testing of pesticides and toxic substances, and the development of test data for submission to the Agency for review.

Draft Test Guideline: Whole Sediment Acute Toxicity Invertebrates, Marine

EPA Pesticide Factsheets

The following draft test guideline is part of a series of test guidelines that have been developed by EPA for use in the testing of pesticides and toxic substances, and the development of test data for submission to the Agency for review.

Testability, Test Automation and Test Driven Development for the Trick Simulation Toolkit

NASA Technical Reports Server (NTRS)

Penn, John

2014-01-01

This paper describes the adoption of a Test Driven Development approach and a Continuous Integration System in the development of the Trick Simulation Toolkit, a generic simulation development environment for creating high fidelity training and engineering simulations at the NASA Johnson Space Center and many other NASA facilities. It describes the approach, and the significant benefits seen, such as fast, thorough and clear test feedback every time code is checked into the code repository. It also describes an approach that encourages development of code that is testable and adaptable.

The International English Language Testing System (IELTS): Its Nature and Development.

ERIC Educational Resources Information Center

Ingram, D. E.

The nature and development of the recently released International English Language Testing System (IELTS) instrument are described. The test is the result of a joint Australian-British project to develop a new test for use with foreign students planning to study in English-speaking countries. It is expected that the modular instrument will become…

Operational Test and Evaluation Manual

DTIC Science & Technology

2011-06-28

Fiscal Office manages all funds received throughout the year for Operations and Maintenance Marine Corps (O&MMC); Research , Development, Test, and... Research , Development, and Acquisition) Assistant Secretary of the Navy ( Research , Development, and Acquisition) (ASN (RDA)) is the DOD’s Component...entire acquisition cycle (SECNAV 2008). This accumulation of data starts with early research and developmental testing and Other tests and

Development of a Questionnaire in Order To Identify Test Anxiety in Nursing Students.

ERIC Educational Resources Information Center

Carraway, Cassandra Todd

It has been repeatedly demonstrated that persons who experience a high degree of test anxiety also experience decrements in performance in evaluative situations. A study was conducted to develop a test anxiety questionnaire for student nurses in order to identify test anxiety. A 40-item, self-report questionaire was developed by two panels of…

Development of a high-frequency and large-stroke fatigue testing system for rubber

NASA Astrophysics Data System (ADS)

Chen, Gang; Wu, Hao; Gao, Jianwen; Lin, Qiang

2017-04-01

The limited capabilities of current fatigue testing machines have resulted in studies on the fatigue behavior of rubber under large-displacement amplitude and high frequency being very sparse. In this study, a fatigue testing system that can carry out large-displacement amplitude and high-frequency fatigue tests on rubber was developed using a moving magnet voice coil motor (MMVCM) actuator, with finite element analysis applied to analyze the thrust of the MMVCM actuator. The results of a series of cyclic tension tests conducted on vulcanized natural rubber specimens using the developed fatigue testing system verify that it has high precision, low noise, large-stroke, and high-frequency characteristics. Further, the load frame with the developed MMVCM actuator is feasible for material testing, especially for large-stroke and high-frequency fatigue tests.

Development of design parameters for virtual cement and concrete testing.

DOT National Transportation Integrated Search

2013-12-01

The development, testing, and certification of new concrete mix designs is an expensive and time-consuming aspect : of the concrete industry. A software package, named the Virtual Concrete and Cement Testing Laboratory (VCCTL), : has been developed b...

Army Job Training Development and Testing Practices Compared to the Instructional Systems Development Model.

ERIC Educational Resources Information Center

Oxford-Carpenter, Rebecca L.; And Others

This paper presents an evaluation of Army job training development and testing practices, with a focus on Advanced Individual Testing. Information comes from intensive interviews with school instructors and from observations in the schools. Results indicate that some aspects of the Instructional Systems Development (ISD) model have been…

Large Liquid Rocket Testing: Strategies and Challenges

NASA Technical Reports Server (NTRS)

Rahman, Shamim A.; Hebert, Bartt J.

2005-01-01

Rocket propulsion development is enabled by rigorous ground testing in order to mitigate the propulsion systems risks that are inherent in space flight. This is true for virtually all propulsive devices of a space vehicle including liquid and solid rocket propulsion, chemical and non-chemical propulsion, boost stage and in-space propulsion and so forth. In particular, large liquid rocket propulsion development and testing over the past five decades of human and robotic space flight has involved a combination of component-level testing and engine-level testing to first demonstrate that the propulsion devices were designed to meet the specified requirements for the Earth to Orbit launchers that they powered. This was followed by a vigorous test campaign to demonstrate the designed propulsion articles over the required operational envelope, and over robust margins, such that a sufficiently reliable propulsion system is delivered prior to first flight. It is possible that hundreds of tests, and on the order of a hundred thousand test seconds, are needed to achieve a high-reliability, flight-ready, liquid rocket engine system. This paper overviews aspects of earlier and recent experience of liquid rocket propulsion testing at NASA Stennis Space Center, where full scale flight engines and flight stages, as well as a significant amount of development testing has taken place in the past decade. The liquid rocket testing experience discussed includes testing of engine components (gas generators, preburners, thrust chambers, pumps, powerheads), as well as engine systems and complete stages. The number of tests, accumulated test seconds, and years of test stand occupancy needed to meet varying test objectives, will be selectively discussed and compared for the wide variety of ground test work that has been conducted at Stennis for subscale and full scale liquid rocket devices. Since rocket propulsion is a crucial long-lead element of any space system acquisition or development, the appropriate plan and strategy must be put in place at the outset of the development effort. A deferment of this test planning, or inattention to strategy, will compromise the ability of the development program to achieve its systems reliability requirements and/or its development milestones. It is important for the government leadership and support team, as well as the vehicle and propulsion development team, to give early consideration to this aspect of space propulsion and space transportation work.

Automotive Stirling engine development program

NASA Technical Reports Server (NTRS)

Ernst, W.; Richey, A.; Farrell, R.; Riecke, G.; Smith, G.; Howarth, R.; Cronin, M.; Simetkosky, M.; Meacher, J.

1986-01-01

This is the ninth Semiannual Technical Progress Report prepared under the Automotive Stirling Engine Development Program. It covers the twenty-eighth and twenty-ninth quarters of activity after award of the contract. Quarterly Technical Progress Reports related program activities from the first through the thirteenth quarters; thereafter, reporting was changed to a Semiannual format. This report summarizes the study of higher-power kinematic Stirling engines for transportation use, development testing of Mod I Stirling engines, and component development activities. Component development testing included successful conical fuel nozzle testing and functional checkout of Mod II controls and auxiliaries on Mod I engine test beds. Overall program philosophy is outlined and data and test results are presented.

RF Testing Of Microwave Integrated Circuits

NASA Technical Reports Server (NTRS)

Romanofsky, R. R.; Ponchak, G. E.; Shalkhauser, K. A.; Bhasin, K. B.

1988-01-01

Fixtures and techniques are undergoing development. Four test fixtures and two advanced techniques developed in continuing efforts to improve RF characterization of MMIC's. Finline/waveguide test fixture developed to test submodules of 30-GHz monolithic receiver. Universal commercially-manufactured coaxial test fixture modified to enable characterization of various microwave solid-state devices in frequency range of 26.5 to 40 GHz. Probe/waveguide fixture is compact, simple, and designed for non destructive testing of large number of MMIC's. Nondestructive-testing fixture includes cosine-tapered ridge, to match impedance wavequide to microstrip. Advanced technique is microwave-wafer probing. Second advanced technique is electro-optical sampling.

The Audiovisual Vocational Preferences Test: A Research Note on Test Development.

ERIC Educational Resources Information Center

Wilgosh, Lorraine

1992-01-01

This paper reports on the development of the Audiovisual Vocational Preferences Test to facilitate career planning for adolescents and young adults with mild to moderate intellectual impairments. The strategies involved in test construction, data on initial use of the test, and improvements in format and content after pilot testing are discussed.…

X-33/RLV Program Aerospike Engines

NASA Technical Reports Server (NTRS)

1999-01-01

Substantial progress was made during the past year in support of the X-33/RLV program. X-33 activity was directed towards completing the remaining design work and building hardware to support test activities. RLV work focused on the nozzle ramp and powerpack technology tasks and on supporting vehicle configuration studies. On X-33, the design activity was completed to the detail level and the remainder of the drawings were released. Component fabrication and engine assembly activity was initiated, and the first two powerpacks and the GSE and STE needed to support powerpack testing were completed. Components fabrication is on track to support the first engine assembly schedule. Testing activity included powerpack testing and component development tests consisting of thrust cell single cell testing, CWI system spider testing, and EMA valve flow and vibration testing. Work performed for RLV was divided between engine system and technology development tasks. Engine system activity focused on developing the engine system configuration and supporting vehicle configuration studies. Also, engine requirements were developed, and engine performance analyses were conducted. In addition, processes were developed for implementing reliability, mass properties, and cost controls during design. Technology development efforts were divided between powerpack and nozzle ramp technology tasks. Powerpack technology activities were directed towards the development of a prototype powerpack and a ceramic turbine technology demonstrator (CTTD) test article which will allow testing of ceramic turbines and a close-coupled gas generator design. Nozzle technology efforts were focused on the selection of a composite nozzle supplier and on the fabrication and test of composite nozzle coupons.

ESTA Exit Report

NASA Technical Reports Server (NTRS)

Lundebjerg, Kristen

2016-01-01

The Energy Test System's Area (ESTA) provides test capabilities and facilities to develop, evaluate or certify hardware in support of human spaceflight. The branch has a few different technical areas including pyrotechnics, batteries, electrical systems, power systems, propulsion and fluids. I will be mainly worked in the propulsion and fluids area. The tests/activities include testing the fluid and energy conversion systems that are required for the exploration and development of space. This group includes function and vibration tests, as well as thermal and vacuum tests. I was trained and certified as an ESTA test director in order to work on tests and sub tests with my mentor as well as the rest of the ESTA team. As a test director, I had the responsibility and authority for planning, developing, safety, execution and reporting on assigned test programs.

Criterion-Referenced Measurement in the Army: Development of a Research- Based, Practical, Test Construction Manual

DTIC Science & Technology

1978-09-01

iE ARI TECHNICAL REPORT S~ TR-78-A31 M CCriterion-Reforencod Loasurement In the Army: Development of a Research-Based, Practical, Test Construction ...conducted to develop a Criterion- 1 Referenced Tests (CRTs) Construction Manual. Major accomplishments were the preparation of a written review of the...survey of the literature on Criterion-Referenced Testing’ conducted in order to provide an information base for development of the CRT Construction

Draft Test Guideline: Fish Acute Toxicity Mitigated By Humic Acid

EPA Pesticide Factsheets

The following draft test guideline is part of a series of test guidelines that have been developed by EPA for use in the testing of pesticides and toxic substances, and the development of test data for submission to the Agency for review.

Draft Test Guideline: Special Considerations for Conducting Aquatic Laboratory Studies

EPA Pesticide Factsheets

The following draft test guideline is part of a series of test guidelines that have been developed by EPA for use in the testing of pesticides and toxic substances, and the development of test data for submission to the Agency for review.

Use of power analysis to develop detectable significance criteria for sea urchin toxicity tests

USGS Publications Warehouse

Carr, R.S.; Biedenbach, J.M.

1999-01-01

When sufficient data are available, the statistical power of a test can be determined using power analysis procedures. The term “detectable significance” has been coined to refer to this criterion based on power analysis and past performance of a test. This power analysis procedure has been performed with sea urchin (Arbacia punctulata) fertilization and embryological development data from sediment porewater toxicity tests. Data from 3100 and 2295 tests for the fertilization and embryological development tests, respectively, were used to calculate the criteria and regression equations describing the power curves. Using Dunnett's test, a minimum significant difference (MSD) (β = 0.05) of 15.5% and 19% for the fertilization test, and 16.4% and 20.6% for the embryological development test, for α ≤ 0.05 and α ≤ 0.01, respectively, were determined. The use of this second criterion reduces type I (false positive) errors and helps to establish a critical level of difference based on the past performance of the test.

Advanced Turbine Technology Applications Project (ATTAP)

NASA Technical Reports Server (NTRS)

1989-01-01

ATTAP activities during the past year were highlighted by an extensive materials assessment, execution of a reference powertrain design, test-bed engine design and development, ceramic component design, materials and component characterization, ceramic component process development and fabrication, component rig design and fabrication, test-bed engine fabrication, and hot gasifier rig and engine testing. Materials assessment activities entailed engine environment evaluation of domestically supplied radial gasifier turbine rotors that were available at the conclusion of the Advanced Gas Turbine (AGT) Technology Development Project as well as an extensive survey of both domestic and foreign ceramic suppliers and Government laboratories performing ceramic materials research applicable to advanced heat engines. A reference powertrain design was executed to reflect the selection of the AGT-5 as the ceramic component test-bed engine for the ATTAP. Test-bed engine development activity focused on upgrading the AGT-5 from a 1038 C (1900 F) metal engine to a durable 1371 C (2500 F) structural ceramic component test-bed engine. Ceramic component design activities included the combustor, gasifier turbine static structure, and gasifier turbine rotor. The materials and component characterization efforts have included the testing and evaluation of several candidate ceramic materials and components being developed for use in the ATTAP. Ceramic component process development and fabrication activities were initiated for the gasifier turbine rotor, gasifier turbine vanes, gasifier turbine scroll, extruded regenerator disks, and thermal insulation. Component rig development activities included combustor, hot gasifier, and regenerator rigs. Test-bed engine fabrication activities consisted of the fabrication of an all-new AGT-5 durability test-bed engine and support of all engine test activities through instrumentation/build/repair. Hot gasifier rig and test-bed engine testing activities were performed.

QUEST/Ada (Query Utility Environment for Software Testing of Ada): The development of a prgram analysis environment for Ada, task 1, phase 2

NASA Technical Reports Server (NTRS)

Brown, David B.

1990-01-01

The results of research and development efforts are described for Task one, Phase two of a general project entitled The Development of a Program Analysis Environment for Ada. The scope of this task includes the design and development of a prototype system for testing Ada software modules at the unit level. The system is called Query Utility Environment for Software Testing of Ada (QUEST/Ada). The prototype for condition coverage provides a platform that implements expert system interaction with program testing. The expert system can modify data in the instrument source code in order to achieve coverage goals. Given this initial prototype, it is possible to evaluate the rule base in order to develop improved rules for test case generation. The goals of Phase two are the following: (1) to continue to develop and improve the current user interface to support the other goals of this research effort (i.e., those related to improved testing efficiency and increased code reliable); (2) to develop and empirically evaluate a succession of alternative rule bases for the test case generator such that the expert system achieves coverage in a more efficient manner; and (3) to extend the concepts of the current test environment to address the issues of Ada concurrency.

The Positive and Negative Effects of Science Concept Tests on Student Conceptual Understanding

NASA Astrophysics Data System (ADS)

Chang, Chun-Yen; Yeh, Ting-Kuang; Barufaldi, James P.

2010-01-01

This study explored the phenomenon of testing effect during science concept assessments, including the mechanism behind it and its impact upon a learner's conceptual understanding. The participants consisted of 208 high school students, in either the 11th or 12th grade. Three types of tests (traditional multiple-choice test, correct concept test, and incorrect concept test) related to the greenhouse effect and global warming were developed to explore the mechanisms underlining the test effect. Interview data analyzed by means of the flow-map method were used to examine the two-week post-test consequences of taking one of these three tests. The results indicated: (1) Traditional tests can affect participants' long-term memory, both positively and negatively; in addition, when students ponder repeatedly and think harder about highly distracting choices during a test, they may gradually develop new conceptions; (2) Students develop more correct conceptions when more true descriptions are provided on the tests; on the other hand, students develop more misconceptions while completing tests in which more false descriptions of choices are provided. Finally, the results of this study revealed a noteworthy phenomenon that tests, if employed appropriately, may be also an effective instrument for assisting students' conceptual understanding.

Development of Environmental Profiles for Testing Equipment Installed in Naval Aircraft (Fixed Wing).

DTIC Science & Technology

1979-02-01

A 0 ’A099 7 1 3 tAU N A E R O S P A C E C O R P B E T H P A G E N Y F / 6 ~ ~ i DEVELOPMENT OF ENVIRONMENTAL. PROFILES FOR TESTING EQUIPMENT...IHIlia- ’ -Q IIIII.L25 MICROCOPY RESOLUTION’ TEST CHART C RMS-9-R-1 DEVELOPMENT OF ENVIRONMENTAL PROFILES FOR TESTING EQUIPMENT INSTALLED IN NAVAL... Development of Environmental Profiles for Testing ,’~ Final j quipment Installed in Naval Aircraft (Fixed Wing), e 7- e* 8 S. PERFORMING ORGANIZATION

Development and Evaluation of Vocational Competency Measures. Final Report.

ERIC Educational Resources Information Center

Chalupsky, Albert B.; And Others

A series of occupational competency tests representing all seven vocational education curriculum areas were developed, field tested, and validated. Seventeen occupations were selected for competency test development: agricultural chemicals applications technician, farm equipment mechanic, computer operator, word processing specialist, apparel…

Test Program for Stirling Radioisotope Generator Hardware at NASA Glenn Research Center

NASA Technical Reports Server (NTRS)

Lewandowski, Edward J.; Bolotin, Gary S.; Oriti, Salvatore M.

2015-01-01

Stirling-based energy conversion technology has demonstrated the potential of high efficiency and low mass power systems for future space missions. This capability is beneficial, if not essential, to making certain deep space missions possible. Significant progress was made developing the Advanced Stirling Radioisotope Generator (ASRG), a 140-W radioisotope power system. A variety of flight-like hardware, including Stirling convertors, controllers, and housings, was designed and built under the ASRG flight development project. To support future Stirling-based power system development NASA has proposals that, if funded, will allow this hardware to go on test at the NASA Glenn Research Center. While future flight hardware may not be identical to the hardware developed under the ASRG flight development project, many components will likely be similar, and system architectures may have heritage to ASRG. Thus, the importance of testing the ASRG hardware to the development of future Stirling-based power systems cannot be understated. This proposed testing will include performance testing, extended operation to establish an extensive reliability database, and characterization testing to quantify subsystem and system performance and better understand system interfaces. This paper details this proposed test program for Stirling radioisotope generator hardware at NASA Glenn. It explains the rationale behind the proposed tests and how these tests will meet the stated objectives.

Test Program for Stirling Radioisotope Generator Hardware at NASA Glenn Research Center

NASA Technical Reports Server (NTRS)

Lewandowski, Edward J.; Bolotin, Gary S.; Oriti, Salvatore M.

2014-01-01

Stirling-based energy conversion technology has demonstrated the potential of high efficiency and low mass power systems for future space missions. This capability is beneficial, if not essential, to making certain deep space missions possible. Significant progress was made developing the Advanced Stirling Radioisotope Generator (ASRG), a 140-watt radioisotope power system. A variety of flight-like hardware, including Stirling convertors, controllers, and housings, was designed and built under the ASRG flight development project. To support future Stirling-based power system development NASA has proposals that, if funded, will allow this hardware to go on test at the NASA Glenn Research Center (GRC). While future flight hardware may not be identical to the hardware developed under the ASRG flight development project, many components will likely be similar, and system architectures may have heritage to ASRG. Thus the importance of testing the ASRG hardware to the development of future Stirling-based power systems cannot be understated. This proposed testing will include performance testing, extended operation to establish an extensive reliability database, and characterization testing to quantify subsystem and system performance and better understand system interfaces. This paper details this proposed test program for Stirling radioisotope generator hardware at NASA GRC. It explains the rationale behind the proposed tests and how these tests will meet the stated objectives.

Current State of Test Development, Administration, and Analysis: A Study of Faculty Practices.

PubMed

Bristol, Timothy J; Nelson, John W; Sherrill, Karin J; Wangerin, Virginia S

Developing valid and reliable test items is a critical skill for nursing faculty. This research analyzed the test item writing practice of 674 nursing faculty. Relationships between faculty characteristics and their test item writing practices were analyzed. Findings reveal variability in practice and a gap in implementation of evidence-based standards when developing and evaluating teacher-made examinations.

Automated Item Banking and Test Development. Final Technical Paper for Period October 1987-April 1988.

ERIC Educational Resources Information Center

Lee, William M.; And Others

Projects to develop an automated item banking and test development system have been undertaken on several occasions at the Air Force Human Resources Laboratory (AFHRL) throughout the past 10 years. Such a system permits the construction of tests in far less time and with a higher degree of accuracy than earlier test construction procedures. This…

Confirmatory Factor Analysis of the Test of Gross Motor Development-2

ERIC Educational Resources Information Center

Wong, Ka Yee Allison; Cheung, Siu Yin

2010-01-01

The purpose of this study was to examine the underlying structure of the second edition of the Test of Gross Motor Development-2 (Ulrich, 2000) as applied to Chinese children. The Test of Gross Motor Development-2 was administered to 626 Hong Kong Chinese children. The outlier test with standard scoring was utilized. After data screening, a total…

40 Years of AEDC Development, Evolution and Application of Numerical Simulations for Integrated Test and Evaluation of Turbine Engine Turbomachinery Operability Issues

DTIC Science & Technology

2010-03-01

distribution is unlimited.  Provide pretest prediction and posttest assessment of aircraft test matrix to optimize wind tunnel inlet testing...Development of Production Simulations ........................................................... 417 A.4 Research and Development Activities...174 Figure 3.175 Two-Stage HTSC as Tested at the Compressor Research Facility [3.125] ........ 174

New method for rapid testing of bond strength for wood adhesives

Treesearch

James M. Wescott; Michael J. Birkeland; Amy E. Traska; Charles R. Frihart; Brice N. Dally

2007-01-01

In developing new adhesives for wood bonding, the testing of bond performance can often be a limiting factor in the development process. Evaluating the bond performance of an adhesive that can be prepared in less than a day often takes several days using standard performance tests. This testing slows the development process and may cause a company to abandon a...

24 CFR 3280.209 - Fire testing.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 5 2011-04-01 2011-04-01 false Fire testing. 3280.209 Section 3280... DEVELOPMENT MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS Fire Safety § 3280.209 Fire testing. All fire testing conducted in accordance with this subpart shall be performed by nationally recognized testing...

24 CFR 3280.209 - Fire testing.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 5 2012-04-01 2012-04-01 false Fire testing. 3280.209 Section 3280... DEVELOPMENT MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS Fire Safety § 3280.209 Fire testing. All fire testing conducted in accordance with this subpart shall be performed by nationally recognized testing...

24 CFR 3280.209 - Fire testing.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Fire testing. 3280.209 Section 3280... DEVELOPMENT MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS Fire Safety § 3280.209 Fire testing. All fire testing conducted in accordance with this subpart shall be performed by nationally recognized testing...

24 CFR 3280.209 - Fire testing.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 24 Housing and Urban Development 5 2013-04-01 2013-04-01 false Fire testing. 3280.209 Section 3280... DEVELOPMENT MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS Fire Safety § 3280.209 Fire testing. All fire testing conducted in accordance with this subpart shall be performed by nationally recognized testing...

Exposure Control Using Adaptive Multi-Stage Item Bundles.

ERIC Educational Resources Information Center

Luecht, Richard M.

This paper presents a multistage adaptive testing test development paradigm that promises to handle content balancing and other test development needs, psychometric reliability concerns, and item exposure. The bundled multistage adaptive testing (BMAT) framework is a modification of the computer-adaptive sequential testing framework introduced by…

Ultra high vacuum test setup for electron gun

NASA Astrophysics Data System (ADS)

Pandiyar, M. L.; Prasad, M.; Jain, S. K.; Kumar, R.; Hannurkar, P. R.

2008-05-01

Ultra High Vacuum (UHV) test setup for electron gun testing has been developed. The development of next generation light sources and accelerators require development of klystron as a radio frequency power source, and in turn electron gun. This UHV electron gun test setup can be used to test the electron guns ranging from high average current, quasi-continuous wave to high peak current, single pulse etc. An electron gun has been designed, fabricated, assembled and tested for insulation up to 80 kV under the programme to develop high power klystron for future accelerators. Further testing includes the electron emission parameters characterization of the cathode, as it determines the development of a reliable and efficient electron gun with high electron emission current and high life time as well. This needs a clean ultra high vacuum to study these parameters particularly at high emission current. The cathode emission current, work function and vapour pressure of cathode surface material at high temperature studies will further help in design and development of high power electron gun The UHV electron gun test setup consists of Turbo Molecular Pump (TMP), Sputter Ion Pump (SIP), pressure gauge, high voltage and cathode power supplies, current measurement device, solenoid magnet and its power supply, residual gas analyser etc. The ultimate vacuum less than 2×10-9 mbar was achieved. This paper describes the UHV test setup for electron gun testing.

Development and Application of a Two-Tier Multiple-Choice Diagnostic Test for High School Students' Understanding of Cell Division and Reproduction

ERIC Educational Resources Information Center

Sesli, Ertugrul; Kara, Yilmaz

2012-01-01

This study involved the development and application of a two-tier diagnostic test for measuring students' understanding of cell division and reproduction. The instrument development procedure had three general steps: defining the content boundaries of the test, collecting information on students' misconceptions, and instrument development.…

40 CFR 80.1000 - What are the requirements for obtaining an exemption for gasoline used for research, development...

Code of Federal Regulations, 2010 CFR

2010-07-01

... obtaining an exemption for gasoline used for research, development or testing purposes? 80.1000 Section 80... obtaining an exemption for gasoline used for research, development or testing purposes? Gasoline used for research, development or testing purposes is exempt from the requirements of this subpart if it is exempted...

40 CFR 79.4 - Requirement of registration.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) in a research, development, or test status; (ii) sold to automobile, engine, or component manufacturers for research, development, or test purposes; or (iii) sold to automobile manufacturers for factory... research, development, or test status or (ii) sold to petroleum, automobile, engine, or component...

40 CFR 79.4 - Requirement of registration.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) in a research, development, or test status; (ii) sold to automobile, engine, or component manufacturers for research, development, or test purposes; or (iii) sold to automobile manufacturers for factory... research, development, or test status or (ii) sold to petroleum, automobile, engine, or component...

40 CFR 79.4 - Requirement of registration.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) in a research, development, or test status; (ii) sold to automobile, engine, or component manufacturers for research, development, or test purposes; or (iii) sold to automobile manufacturers for factory... research, development, or test status or (ii) sold to petroleum, automobile, engine, or component...

40 CFR 79.4 - Requirement of registration.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) in a research, development, or test status; (ii) sold to automobile, engine, or component manufacturers for research, development, or test purposes; or (iii) sold to automobile manufacturers for factory... research, development, or test status or (ii) sold to petroleum, automobile, engine, or component...

40 CFR 79.4 - Requirement of registration.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) in a research, development, or test status; (ii) sold to automobile, engine, or component manufacturers for research, development, or test purposes; or (iii) sold to automobile manufacturers for factory... research, development, or test status or (ii) sold to petroleum, automobile, engine, or component...

Florida alternative NTCIP testing software (ANTS) for actuated signal controllers.

DOT National Transportation Integrated Search

2009-01-01

The scope of this research project did include the development of a software tool to test devices for NTCIP compliance. Development of the Florida Alternative NTCIP Testing Software (ANTS) was developed by the research team due to limitations found w...

Space Launch System Base Heating Test: Sub-Scale Rocket Engine/Motor Design, Development & Performance Analysis

NASA Technical Reports Server (NTRS)

Mehta, Manish; Seaford, Mark; Kovarik, Brian; Dufrene, Aaron; Solly, Nathan

2014-01-01

ATA-002 Technical Team has successfully designed, developed, tested and assessed the SLS Pathfinder propulsion systems for the Main Base Heating Test Program. Major Outcomes of the Pathfinder Test Program: Reach 90% of full-scale chamber pressure Achieved all engine/motor design parameter requirements Reach steady plume flow behavior in less than 35 msec Steady chamber pressure for 60 to 100 msec during engine/motor operation Similar model engine/motor performance to full-scale SLS system Mitigated nozzle throat and combustor thermal erosion Test data shows good agreement with numerical prediction codes Next phase of the ATA-002 Test Program Design & development of the SLS OML for the Main Base Heating Test Tweak BSRM design to optimize performance Tweak CS-REM design to increase robustness MSFC Aerosciences and CUBRC have the capability to develop sub-scale propulsion systems to meet desired performance requirements for short-duration testing.

Development of knowledge tests for multi-disciplinary emergency training: a review and an example.

PubMed

Sørensen, J L; Thellesen, L; Strandbygaard, J; Svendsen, K D; Christensen, K B; Johansen, M; Langhoff-Roos, P; Ekelund, K; Ottesen, B; Van Der Vleuten, C

2015-01-01

The literature is sparse on written test development in a post-graduate multi-disciplinary setting. Developing and evaluating knowledge tests for use in multi-disciplinary post-graduate training is challenging. The objective of this study was to describe the process of developing and evaluating a multiple-choice question (MCQ) test for use in a multi-disciplinary training program in obstetric-anesthesia emergencies. A multi-disciplinary working committee with 12 members representing six professional healthcare groups and another 28 participants were involved. Recurrent revisions of the MCQ items were undertaken followed by a statistical analysis. The MCQ items were developed stepwise, including decisions on aims and content, followed by testing for face and content validity, construct validity, item-total correlation, and reliability. To obtain acceptable content validity, 40 out of originally 50 items were included in the final MCQ test. The MCQ test was able to distinguish between levels of competence, and good construct validity was indicated by a significant difference in the mean score between consultants and first-year trainees, as well as between first-year trainees and medical and midwifery students. Evaluation of the item-total correlation analysis in the 40 items set revealed that 11 items needed re-evaluation, four of which addressed content issues in local clinical guidelines. A Cronbach's alpha of 0.83 for reliability was found, which is acceptable. Content and construct validity and reliability were acceptable. The presented template for the development of this MCQ test could be useful to others when developing knowledge tests and may enhance the overall quality of test development. © 2014 The Acta Anaesthesiologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

Progress Towards the Development of a Fathead Minnow Embryo Test and Comparison to the Zebrafish Embryo Test for Assessing Acute Fish Toxicity

EPA Science Inventory

The Zebrafish Embryo Test (ZFET) for acute fish toxicity is a well developed method nearing adoption as an OECD Test Guideline. Early drafts of the test guideline (TG) envisioned a suite of potential test species to be covered including zebrafish, fathead minnow, Japanese Medaka...

History and Benefits of Engine Level Testing Throughout the Space Shuttle Main Engine Program

NASA Technical Reports Server (NTRS)

VanHooser, Katherine; Kan, Kenneth; Maddux, Lewis; Runkle, Everett

2010-01-01

Rocket engine testing is important throughout a program s life and is essential to the overall success of the program. Space Shuttle Main Engine (SSME) testing can be divided into three phases: development, certification, and operational. Development tests are conducted on the basic design and are used to develop safe start and shutdown transients and to demonstrate mainstage operation. This phase helps form the foundation of the program, demands navigation of a very steep learning curve, and yields results that shape the final engine design. Certification testing involves multiple engine samples and more aggressive test profiles that explore the boundaries of the engine to vehicle interface requirements. The hardware being tested may have evolved slightly from that in the development phase. Operational testing is conducted with mature hardware and includes acceptance testing of flight assets, resolving anomalies that occur in flight, continuing to expand the performance envelope, and implementing design upgrades. This paper will examine these phases of testing and their importance to the SSME program. Examples of tests conducted in each phase will also be presented.

Advanced Concept

NASA Image and Video Library

2003-12-01

This photo gives an overhead look at an RS-88 development rocket engine being test fired at NASA's Marshall Space Flight Center in Huntsville, Alabama, in support of the Pad Abort Demonstration (PAD) test flights for NASA's Orbital Space Plane (OSP). The tests could be instrumental in developing the first crew launch escape system in almost 30 years. Paving the way for a series of integrated PAD test flights, the engine tests support development of a system that could pull a crew safely away from danger during liftoff. A series of 16 hot fire tests of a 50,000-pound thrust RS-88 rocket engine were conducted, resulting in a total of 55 seconds of successful engine operation. The engine is being developed by the Rocketdyne Propulsion and Power unit of the Boeing Company. Integrated launch abort demonstration tests in 2005 will use four RS-88 engines to separate a test vehicle from a test platform, simulating pulling a crewed vehicle away from an aborted launch. Four 156-foot parachutes will deploy and carry the vehicle to landing. Lockheed Martin is building the vehicles for the PAD tests. Seven integrated tests are plarned for 2005 and 2006.

Advanced Concept

NASA Image and Video Library

2003-12-01

In this photo, an RS-88 development rocket engine is being test fired at NASA's Marshall Space Flight Center in Huntsville, Alabama, in support of the Pad Abort Demonstration (PAD) test flights for NASA's Orbital Space Plane (OSP). The tests could be instrumental in developing the first crew launch escape system in almost 30 years. Paving the way for a series of integrated PAD test flights, the engine tests support development of a system that could pull a crew safely away from danger during liftoff. A series of 16 hot fire tests of a 50,000-pound thrust RS-88 rocket engine were conducted, resulting in a total of 55 seconds of successful engine operation. The engine is being developed by the Rocketdyne Propulsion and Power unit of the Boeing Company. Integrated launch abort demonstration tests in 2005 will use four RS-88 engines to separate a test vehicle from a test platform, simulating pulling a crewed vehicle away from an aborted launch. Four 156-foot parachutes will deploy and carry the vehicle to landing. Lockheed Martin is building the vehicles for the PAD tests. Seven integrated tests are plarned for 2005 and 2006.

Structural and thermal testing of lightweight reflector panels

NASA Technical Reports Server (NTRS)

Mcgregor, J.; Helms, R.; Hill, T.

1992-01-01

The paper describes the test facility developed for testing large lightweight reflective panels with very accurate and stable surfaces, such as the mirror panels of composite construction developed for the NASA's Precision Segmented Reflector (PSR). Special attention is given to the panel construction and the special problems posed by the characteristics of these panels; the design of the Optical/Thermal Vacuum test facility for structural and thermal testing, developed at the U.S. AFPL; and the testing procedure. The results of the PSR panel test program to date are presented. The test data showed that the analytical approaches used for the panel design and for the prediction of the on-orbit panel behavior were adequate.

Liquid Rocket Engine Testing Overview

NASA Technical Reports Server (NTRS)

Rahman, Shamim

2005-01-01

Contents include the following: Objectives and motivation for testing. Technology, Research and Development Test and Evaluation (RDT&E), evolutionary. Representative Liquid Rocket Engine (LRE) test compaigns. Apollo, shuttle, Expandable Launch Vehicles (ELV) propulsion. Overview of test facilities for liquid rocket engines. Boost, upper stage (sea-level and altitude). Statistics (historical) of Liquid Rocket Engine Testing. LOX/LH, LOX/RP, other development. Test project enablers: engineering tools, operations, processes, infrastructure.

Formal functional test designs with a test representation language

NASA Technical Reports Server (NTRS)

Hops, J. M.

1993-01-01

The application of the category-partition method to the test design phase of hardware, software, or system test development is discussed. The method provides a formal framework for reducing the total number of possible test cases to a minimum logical subset for effective testing. An automatic tool and a formal language were developed to implement the method and produce the specification of test cases.

Visit from JAXA to NASA MSFC: The Engines Element & Ideas for Collaboration

NASA Technical Reports Server (NTRS)

Greene, William D.

2013-01-01

System Design, Development, and Fabrication: Design, develop, and fabricate or procure MB-60 component hardware compliant with the imposed technical requirements and in sufficient quantities to fulfill the overall MB-60 development effort. System Development, Assembly, and Test: Manage the scope of the development, assembly, and test-related activities for MB-60 development. This scope includes engine-level development planning, engine assembly and disassembly, test planning, engine testing, inspection, anomaly resolution, and development of necessary ground support equipment and special test equipment. System Integration: Provide coordinated integration in the realms of engineering, safety, quality, and manufacturing disciplines across the scope of the MB-60 design and associated products development Safety and Mission Assurance, structural design, fracture control, materials and processes, thermal analysis. Systems Engineering and Analysis: Manage and perform Systems Engineering and Analysis to provide rigor and structure to the overall design and development effort for the MB-60. Milestone reviews, requirements management, system analysis, program management support Program Management: Manage, plan, and coordinate the activities across all portions of the MB-60 work scope by providing direction for program administration, business management, and supplier management.

Transcription and the IELTS Speaking Test: Facilitating Development

ERIC Educational Resources Information Center

Stones, Thomas P.

2013-01-01

This article describes a transcription task cycle that was designed to facilitate the development of skills for the IELTS (International English Language Testing System) speaking test at a language school in Japan. The cycle involved practice test, transcription, student correction, teacher correction, and retrial of the original test and…

Test Technical Manual 2014 GED® Test

ERIC Educational Resources Information Center

GED Testing Service, 2014

2014-01-01

This manual was written to provide technical information regarding the General Educational Development (GED®) test as evidence that the GED® test is technically sound. Throughout this manual, documentation is provided regarding the development of the GED® test and data collection activities, as well as evidence of reliability and validity. This…

Factors Affecting Item Difficulty in English Listening Comprehension Tests

ERIC Educational Resources Information Center

Sung, Pei-Ju; Lin, Su-Wei; Hung, Pi-Hsia

2015-01-01

Task difficulty is a critical issue affecting test developers. Controlling or balancing the item difficulty of an assessment improves its validity and discrimination. Test developers construct tests from the cognitive perspective, by making the test constructing process more scientific and efficient; thus, the scores obtained more precisely…

Development of multiple choice pictorial test for measuring the dimensions of knowledge

NASA Astrophysics Data System (ADS)

Nahadi, Siswaningsih, Wiwi; Erna

2017-05-01

This study aims to develop a multiple choice pictorial test as a tool to measure dimension of knowledge in chemical equilibrium subject. The method used is Research and Development and validation that was conducted in the preliminary studies and model development. The product is multiple choice pictorial test. The test was developed by 22 items and tested to 64 high school students in XII grade. The quality of test was determined by value of validity, reliability, difficulty index, discrimination power, and distractor effectiveness. The validity of test was determined by CVR calculation using 8 validators (4 university teachers and 4 high school teachers) with average CVR value 0,89. The reliability of test has very high category with value 0,87. Discrimination power of items with a very good category is 32%, 59% as good category, and 20% as sufficient category. This test has a varying level of difficulty, item with difficult category is 23%, the medium category is 50%, and the easy category is 27%. The distractor effectiveness of items with a very poor category is 1%, poor category is 1%, medium category is 4%, good category is 39%, and very good category is 55%. The dimension of knowledge that was measured consist of factual knowledge, conceptual knowledge, and procedural knowledge. Based on the questionnaire, students responded quite well to the developed test and most of the students like this kind of multiple choice pictorial test that include picture as evaluation tool compared to the naration tests was dominated by text.

Decision curve analysis for assessing the usefulness of tests for making decisions to treat: an application to tests for prodromal psychosis.

PubMed

Pulleyblank, Ryan; Chuma, Jefter; Gilbody, Simon M; Thompson, Carl

2013-09-01

For a test to be considered useful for making treatment decisions, it is necessary that making treatment decisions based on the results of the test be a preferable strategy to making treatment decisions without the test. Decision curve analysis is a framework for assessing when a test would be expected to be useful, which integrates evidence of a test's performance characteristics (sensitivity and specificity), condition prevalence among at-risk patients, and patient preferences for treatment. We describe decision curve analysis generally and illustrate its potential through an application to tests for prodromal psychosis. Clinical psychosis is often preceded by a prodromal phase, but not all those with prodromal symptoms proceed to develop full psychosis. Patients identified as at risk for developing psychosis may be considered for proactive treatment to mitigate development of clinically defined psychosis. Tests exist to help identify those at-risk patients most likely to develop psychosis, but it is uncertain when these tests would be considered useful for making proactive treatment decisions. We apply decision curve analysis to results from a systematic review of studies investigating clinical tests for predicting the development of psychosis in at-risk populations, and present resulting decision curves that illustrate when the tests may be expected to be useful for making proactive treatment decisions.

More Than Just Accuracy: A Novel Method to Incorporate Multiple Test Attributes in Evaluating Diagnostic Tests Including Point of Care Tests.

PubMed

Thompson, Matthew; Weigl, Bernhard; Fitzpatrick, Annette; Ide, Nicole

2016-01-01

Current frameworks for evaluating diagnostic tests are constrained by a focus on diagnostic accuracy, and assume that all aspects of the testing process and test attributes are discrete and equally important. Determining the balance between the benefits and harms associated with new or existing tests has been overlooked. Yet, this is critically important information for stakeholders involved in developing, testing, and implementing tests. This is particularly important for point of care tests (POCTs) where tradeoffs exist between numerous aspects of the testing process and test attributes. We developed a new model that multiple stakeholders (e.g., clinicians, patients, researchers, test developers, industry, regulators, and health care funders) can use to visualize the multiple attributes of tests, the interactions that occur between these attributes, and their impacts on health outcomes. We use multiple examples to illustrate interactions between test attributes (test availability, test experience, and test results) and outcomes, including several POCTs. The model could be used to prioritize research and development efforts, and inform regulatory submissions for new diagnostics. It could potentially provide a way to incorporate the relative weights that various subgroups or clinical settings might place on different test attributes. Our model provides a novel way that multiple stakeholders can use to visualize test attributes, their interactions, and impacts on individual and population outcomes. We anticipate that this will facilitate more informed decision making around diagnostic tests.

Development, evaluation and application of performance-based brake testing technologies field test : executive summary

DOT National Transportation Integrated Search

1999-09-01

This report presents the results of the field test portion of the Development, Evaluation, and Application of Performance-Based Brake Testing Technologies sponsored by the Federal Highway Administrations (FHWA) Office of Motor Carriers.

Glossary of testing terminology for rechargeable batteries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Butler, P.C.

1988-10-01

The Battery Test Working Task Force was formed in 1983 for the purpose of coordinating the evaluation of development rechargeable batteries by DOE-funded labs. The Task Force developed this glossary of testing terminology to improve the accuracy of communication and to permit meaningful comparisons of test results. It consists of a section of technical terms and a separate section of programmatic phrases and acronyms. The glossary emphasizes terms related to electric vehicle batteries due to the significant development and testing activities in this area. 8 refs.

Developing Tests for the Assessment of Traditional Language Skill: A Case Study in an Indigenous Australian Community

ERIC Educational Resources Information Center

Loakes, Deborah; Moses, Karin; Simpson, Jane; Wigglesworth, Gillian

2012-01-01

This article reports on the development and piloting of a vocabulary recognition test designed for Indigenous Australian children. The research is both application oriented and development oriented. The aims of the article are to determine how well the test is used as a test instrument and the extent to which children recognize vocabulary items in…

Systematic evaluation of non-animal test methods for skin sensitisation safety assessment.

PubMed

Reisinger, Kerstin; Hoffmann, Sebastian; Alépée, Nathalie; Ashikaga, Takao; Barroso, Joao; Elcombe, Cliff; Gellatly, Nicola; Galbiati, Valentina; Gibbs, Susan; Groux, Hervé; Hibatallah, Jalila; Keller, Donald; Kern, Petra; Klaric, Martina; Kolle, Susanne; Kuehnl, Jochen; Lambrechts, Nathalie; Lindstedt, Malin; Millet, Marion; Martinozzi-Teissier, Silvia; Natsch, Andreas; Petersohn, Dirk; Pike, Ian; Sakaguchi, Hitoshi; Schepky, Andreas; Tailhardat, Magalie; Templier, Marie; van Vliet, Erwin; Maxwell, Gavin

2015-02-01

The need for non-animal data to assess skin sensitisation properties of substances, especially cosmetics ingredients, has spawned the development of many in vitro methods. As it is widely believed that no single method can provide a solution, the Cosmetics Europe Skin Tolerance Task Force has defined a three-phase framework for the development of a non-animal testing strategy for skin sensitization potency prediction. The results of the first phase – systematic evaluation of 16 test methods – are presented here. This evaluation involved generation of data on a common set of ten substances in all methods and systematic collation of information including the level of standardisation, existing test data,potential for throughput, transferability and accessibility in cooperation with the test method developers.A workshop was held with the test method developers to review the outcome of this evaluation and to discuss the results. The evaluation informed the prioritisation of test methods for the next phase of the non-animal testing strategy development framework. Ultimately, the testing strategy – combined with bioavailability and skin metabolism data and exposure consideration – is envisaged to allow establishment of a data integration approach for skin sensitisation safety assessment of cosmetic ingredients.

Model-Based Development of Automotive Electronic Climate Control Software

NASA Astrophysics Data System (ADS)

Kakade, Rupesh; Murugesan, Mohan; Perugu, Bhupal; Nair, Mohanan

With increasing complexity of software in today's products, writing and maintaining thousands of lines of code is a tedious task. Instead, an alternative methodology must be employed. Model-based development is one candidate that offers several benefits and allows engineers to focus on the domain of their expertise than writing huge codes. In this paper, we discuss the application of model-based development to the electronic climate control software of vehicles. The back-to-back testing approach is presented that ensures flawless and smooth transition from legacy designs to the model-based development. Simulink report generator to create design documents from the models is presented along with its usage to run the simulation model and capture the results into the test report. Test automation using model-based development tool that support the use of unique set of test cases for several testing levels and the test procedure that is independent of software and hardware platform is also presented.

Test Selection, Adaptation, and Evaluation: A Systematic Approach to Assess Nutritional Influences on Child Development in Developing Countries

ERIC Educational Resources Information Center

Prado, Elizabeth L.; Hartini, Sri; Rahmawati, Atik; Ismayani, Elfa; Hidayati, Astri; Hikmah, Nurul; Muadz, Husni; Apriatni, Mandri S.; Ullman, Michael T.; Shankar, Anuraj H.; Alcock, Katherine J.

2010-01-01

Background: Evaluating the impact of nutrition interventions on developmental outcomes in developing countries can be challenging since most assessment tests have been produced in and for developed country settings. Such tests may not be valid measures of children's abilities when used in a new context. Aims: We present several principles for the…

An Overview of Models of Speaking Performance and Its Implications for the Development of Procedural Framework for Diagnostic Speaking Tests

ERIC Educational Resources Information Center

Zhao, Zhongbao

2013-01-01

This paper aims at developing a procedural framework for the development and validation of diagnostic speaking tests. The researcher reviews the current available models of speaking performance, analyzes the distinctive features and then points out the implications for the development of a procedural framework for diagnostic speaking tests. On…

System reliability analysis through corona testing

NASA Technical Reports Server (NTRS)

Lalli, V. R.; Mueller, L. A.; Koutnik, E. A.

1975-01-01

In the Reliability and Quality Engineering Test Laboratory at the NASA Lewis Research Center a nondestructive, corona-vacuum test facility for testing power system components was developed using commercially available hardware. The test facility was developed to simulate operating temperature and vacuum while monitoring corona discharges with residual gases. This facility is being used to test various high voltage power system components.

Hypersonic Flight Test Windows for Technology Development Testing

DTIC Science & Technology

2013-11-01

used. 2.1 Propulsion and Controls Test Window The technologies dealing with scramjet propulsion (inlets, fuel injection, etc.) and hypersonic ...AFRL-RQ-WP-TM-2013-0260 HYPERSONIC FLIGHT TEST WINDOWS FOR TECHNOLOGY DEVELOPMENT TESTING Barry M. Hellman Vehicle Technology Branch...DATES COVERED (From - To) November 2013 Final 01 November 2013 – 25 November 2013 4. TITLE AND SUBTITLE HYPERSONIC FLIGHT TEST WINDOWS FOR

Development of An Advanced JP-8 Fuel

DTIC Science & Technology

1993-12-01

included the Microthermal Precipitation Test (MTP), Fuel Reactor Test, Hot Liquid Process Simulator (HLPS), and Isothermal Corrosion Oxidation Test (ICOT... Microthermal Precipitation Test The impetus for this development effort was the need for a screening test that could discriminate between fuels of...varying propensity to produce thermally induced insoluble particulate material in the bulk fuel. The Microthermal Precipitation (MTP) test thermally

Development of a Work Control System for Propulsion Testing at NASA Stennis

NASA Technical Reports Server (NTRS)

Messer, Elizabeth A.

2005-01-01

In 1996 Stennis Space Center was given management authority for all Propulsion Testing for NASA. Over the next few years several research and development (R&D) test facilities were completed and brought up to full operation in what is known as the E-Complex Test Facility at Stennis Space Center. To construct, activate and operate these test facilities, a manual paper-based work control system was created. After utilizing this paper-based work control system for approximately three years, it became apparent that the research and development test area needed a better method to execute, monitor, and report on tasks required to further propulsion testing. The paper based system did not provide the engineers adequate visibility into work tasks or the tracking of testing or hardware discrepancies. This system also restricted the engineer s ability to utilize and access past knowledge and experiences given the severe schedule limitations for most R&D propulsion testing projects. Therefore a system was developed to meet the growing need of Test Operations called the Propulsion Test Directorate (PTD) Work Control System. This system is used to plan, perform, and track tasks that support testing and also to capture lessons learned while doing so.

The Analysis of Weak Rock Using the Pressuremeter

NASA Astrophysics Data System (ADS)

Dafni, Jacob

The pressuremeter is a versatile in situ testing instrument capable of testing a large range of materials from very soft clay to weak rock. Due to limitations of other testing devices, the pressuremeter is one of the few instruments capable of capturing stiffness and strength properties of weak rock. However, data collected is only useful if the material tested is properly modeled and desirable material properties can be obtained. While constitutive models with various flows rules have been developed for pressuremeter analysis in soil, less research has been directed at model development for pressuremeter tests in weak rock. The result is pressuremeter data collected in rock is typically analyzed using models designed for soil. The aim of this study was to explore constitutive rock models for development into a pressuremeter framework. Three models were considered, with two of those three implemented for pressuremeter analysis. A Mohr-Coulomb model with a tensile cutoff developed by Haberfield (1987) and a Hoek-Brown model initiated by Yang et al (2011) and further developed by the author were implemented and calibrated against a data set of pressuremeter tests from 5 project test sites including a total of 115 pressuremeter tests in a number of different rock formations. Development of a multiscale damage model established by Kondo et al (2008) was explored. However, this model requires further development to be used for pressuremeter data analysis.

The Interrelationship of Ego, Moral, and Conceptual Development in a College Group.

ERIC Educational Resources Information Center

Lutwak, Nita

1984-01-01

Compared three personality theories (ego development, moral development, and conceptual systems theory) in 102 college students who completed the Sentence Completion Test, This I Believe Test, and Defining Issues Test. Results indicated a significant relationship between all three pairs of theories. (JAC)

Cell module and fuel conditioner development

NASA Technical Reports Server (NTRS)

Hoover, D. Q., Jr.

1981-01-01

The design features and plans for fabrication of Stacks 564 and 800 are described. The results of the OS/IES loop testing of Stack 562, endurance testing of Stack 560 and the post test analysis of Stack 561 are reported. Progress on construction and modification of the fuel cell test facilities and the 10 kW reformer test station is described. Efforts to develop the technical data base for the fuel conditioning system included vendor contacts, packed bed heat transfer tests, development of the BOLTAR computer program, and work on the detailed design of the 10 kW reformer are described.

FETAX assay for evaluation of developmental toxicity.

PubMed

Mouche, Isabelle; Malesic, Laure; Gillardeaux, Olivier

2011-01-01

The Frog Embryo Teratogenesis Assay Xenopus (FETAX) test is a development toxicity screening test. Due to the small amount of compound needed and the capability to study organogenesis in a short period of time (96 h), FETAX test constitutes an efficient development toxicity alert test when performed early in drug safety development. The test is conducted on fertilized Xenopus laevis mid-blastula stage eggs over the organogenesis period. Compound teratogenic potential is determined after analysis of the mortality and malformation observations on larva. In parallel, FETAX test provides also information concerning embryotoxic effect based on larva length.

FETAX Assay for Evaluation of Developmental Toxicity.

PubMed

Mouche, Isabelle; Malésic, Laure; Gillardeaux, Olivier

2017-01-01

The frog embryo teratogenesis assay Xenopus (FETAX) test is a development toxicity screening test. Due to the small amount of compound needed and the capability to study organogenesis in a short period of time (96 h), FETAX test constitutes an efficient development toxicity alert test when performed early in drug safety development. The test is conducted on fertilized Xenopus laevis mid-blastula-stage eggs over the organogenesis period. Compound teratogenic potential is determined after analysis of the mortality and malformation observations on larvae. In parallel, FETAX test provides also information concerning embryotoxic effect based on larva length.

Behavior driven testing in ALMA telescope calibration software

NASA Astrophysics Data System (ADS)

Gil, Juan P.; Garces, Mario; Broguiere, Dominique; Shen, Tzu-Chiang

2016-07-01

ALMA software development cycle includes well defined testing stages that involves developers, testers and scientists. We adapted Behavior Driven Development (BDD) to testing activities applied to Telescope Calibration (TELCAL) software. BDD is an agile technique that encourages communication between roles by defining test cases using natural language to specify features and scenarios, what allows participants to share a common language and provides a high level set of automated tests. This work describes how we implemented and maintain BDD testing for TELCAL, the infrastructure needed to support it and proposals to expand this technique to other subsystems.

The X-33 Extended Flight Test Range

NASA Technical Reports Server (NTRS)

Mackall, Dale A.; Sakahara, Robert; Kremer, Steven E.

1998-01-01

Development of an extended test range, with range instrumentation providing continuous vehicle communications, is required to flight-test the X-33, a scaled version of a reusable launch vehicle. The extended test range provides vehicle communications coverage from California to landing at Montana or Utah. This paper provides an overview of the approaches used to meet X-33 program requirements, including using multiple ground stations, and methods to reduce problems caused by reentry plasma radio frequency blackout. The advances used to develop the extended test range show other hypersonic and access-to-space programs can benefit from the development of the extended test range.

SLS Flight Software Testing: Using a Modified Agile Software Testing Approach

NASA Technical Reports Server (NTRS)

Bolton, Albanie T.

2016-01-01

NASA's Space Launch System (SLS) is an advanced launch vehicle for a new era of exploration beyond earth's orbit (BEO). The world's most powerful rocket, SLS, will launch crews of up to four astronauts in the agency's Orion spacecraft on missions to explore multiple deep-space destinations. Boeing is developing the SLS core stage, including the avionics that will control vehicle during flight. The core stage will be built at NASA's Michoud Assembly Facility (MAF) in New Orleans, LA using state-of-the-art manufacturing equipment. At the same time, the rocket's avionics computer software is being developed here at Marshall Space Flight Center in Huntsville, AL. At Marshall, the Flight and Ground Software division provides comprehensive engineering expertise for development of flight and ground software. Within that division, the Software Systems Engineering Branch's test and verification (T&V) team uses an agile test approach in testing and verification of software. The agile software test method opens the door for regular short sprint release cycles. The idea or basic premise behind the concept of agile software development and testing is that it is iterative and developed incrementally. Agile testing has an iterative development methodology where requirements and solutions evolve through collaboration between cross-functional teams. With testing and development done incrementally, this allows for increased features and enhanced value for releases. This value can be seen throughout the T&V team processes that are documented in various work instructions within the branch. The T&V team produces procedural test results at a higher rate, resolves issues found in software with designers at an earlier stage versus at a later release, and team members gain increased knowledge of the system architecture by interfacing with designers. SLS Flight Software teams want to continue uncovering better ways of developing software in an efficient and project beneficial manner. Through agile testing, there has been increased value through individuals and interactions over processes and tools, improved customer collaboration, and improved responsiveness to changes through controlled planning. The presentation will describe agile testing methodology as taken with the SLS FSW Test and Verification team at Marshall Space Flight Center.

Automotive Stirling engine development program

NASA Technical Reports Server (NTRS)

Ernst, W.; Piller, S.; Richey, A.; Simetkosky, M.; Antonelli, M. (Editor)

1982-01-01

Activities performed on Mod I engine testing and test results, progress in manufacturing, assembling and testing of a Mod I engine in the United States, P40 Stirling engine dynamometer and multifuels testing, analog/digital controls system testing, Stirling reference engine manufacturing and reduced size studies, components and subsystems, and computer code development are summarized.

Lean Development with the Morpheus Simulation Software

NASA Technical Reports Server (NTRS)

Brogley, Aaron C.

2013-01-01

The Morpheus project is an autonomous robotic testbed currently in development at NASA's Johnson Space Center (JSC) with support from other centers. Its primary objectives are to test new 'green' fuel propulsion systems and to demonstrate the capability of the Autonomous Lander Hazard Avoidance Technology (ALHAT) sensor, provided by the Jet Propulsion Laboratory (JPL) on a lunar landing trajectory. If successful, these technologies and lessons learned from the Morpheus testing cycle may be incorporated into a landing descent vehicle used on the moon, an asteroid, or Mars. In an effort to reduce development costs and cycle time, the project employs lean development engineering practices in its development of flight and simulation software. The Morpheus simulation makes use of existing software packages where possible to reduce the development time. The development and testing of flight software occurs primarily through the frequent test operation of the vehicle and incrementally increasing the scope of the test. With rapid development cycles, risk of loss of the vehicle and loss of the mission are possible, but efficient progress in development would not be possible without that risk.

Bioregenerative Planetary Life Support Systems Test Complex (BIO-Plex): NASA's Next Human-Rated Testing Facility

NASA Technical Reports Server (NTRS)

Tri, Terry O.

1999-01-01

As a key component in its ground test bed capability, NASA's Advanced Life Support Program has been developing a large-scale advanced life support test facility capable of supporting long-duration evaluations of integrated bioregenerative life support systems with human test crews. This facility-targeted for evaluation of hypogravity compatible life support systems to be developed for use on planetary surfaces such as Mars or the Moon-is called the Bioregenerative Planetary Life Support Systems Test Complex (BIO-Plex) and is currently under development at the Johnson Space Center. This test bed is comprised of a set of interconnected chambers with a sealed internal environment which are outfitted with systems capable of supporting test crews of four individuals for periods exceeding one year. The advanced technology systems to be tested will consist of both biological and physicochemical components and will perform all required crew life support functions. This presentation provides a description of the proposed test "missions" to be supported by the BIO-Plex and the planned development strategy for the facility.

Development of a full-scale transmission testing procedure to evaluate advanced lubricants

NASA Technical Reports Server (NTRS)

Lewicki, David G.; Decker, Harry J.; Shimski, John T.

1992-01-01

Experimental tests were performed on the OH-58A helicopter main rotor transmission in the NASA Lewis 500-hp Helicopter Transmission Test Stand. The testing was part of a joint Navy/NASA/Army lubrication program. The objective of the program was to develop a separate lubricant for gearboxes and demonstrate an improved performance in life and load-carrying capacity. The goal of the experiments was to develop a testing procedure to fail certain transmission components using a MIL-L-23699 base reference oil, then run identical tests with improved lubricants and demonstrate performance. The tests were directed at failing components that the Navy has had problems with due to marginal lubrication. These failures included mast shaft bearing micropitting, sun gear and planet bearing fatigue, and spiral bevel gear scoring. A variety of tests were performed and over 900 hours of total run time accumulated for these tests. Some success was achieved in developing a testing procedure to produce sun gear and planet bearing fatigue failures. Only marginal success was achieved in producing mast shaft bearing micropitting and spiral bevel gear scoring.

Implementation of Wireless and Intelligent Sensor Technologies in the Propulsion Test Environment

NASA Technical Reports Server (NTRS)

Solano, Wanda M.; Junell, Justin C.; Shumard, Kenneth

2003-01-01

From the first Saturn V rocket booster (S-II-T) testing in 1966 and the routine Space Shuttle Main Engine (SSME) testing beginning in 1975, to more recent test programs such as the X-33 Aerospike Engine, the Integrated Powerhead Development (IPD) program, and the Hybrid Sounding Rocket (HYSR), Stennis Space Center (SSC) continues to be a premier location for conducting large-scale propulsion testing. Central to each test program is the capability for sensor systems to deliver reliable measurements and high quality data, while also providing a means to monitor the test stand area to the highest degree of safety and sustainability. As part of an on-going effort to enhance the testing capabilities of Stennis Space Center, the Test Technology and Development group is developing and applying a number of wireless and intelligent sensor technologies in ways that are new to the test existing test environment.

Product assurance technology for procuring reliable, radiation-hard, custom LSI/VLSI electronics

NASA Technical Reports Server (NTRS)

Buehler, M. G.; Allen, R. A.; Blaes, B. R.; Hicks, K. A.; Jennings, G. A.; Lin, Y.-S.; Pina, C. A.; Sayah, H. R.; Zamani, N.

1989-01-01

Advanced measurement methods using microelectronic test chips are described. These chips are intended to be used in acquiring the data needed to qualify Application Specific Integrated Circuits (ASIC's) for space use. Efforts were focused on developing the technology for obtaining custom IC's from CMOS/bulk silicon foundries. A series of test chips were developed: a parametric test strip, a fault chip, a set of reliability chips, and the CRRES (Combined Release and Radiation Effects Satellite) chip, a test circuit for monitoring space radiation effects. The technical accomplishments of the effort include: (1) development of a fault chip that contains a set of test structures used to evaluate the density of various process-induced defects; (2) development of new test structures and testing techniques for measuring gate-oxide capacitance, gate-overlap capacitance, and propagation delay; (3) development of a set of reliability chips that are used to evaluate failure mechanisms in CMOS/bulk: interconnect and contact electromigration and time-dependent dielectric breakdown; (4) development of MOSFET parameter extraction procedures for evaluating subthreshold characteristics; (5) evaluation of test chips and test strips on the second CRRES wafer run; (6) two dedicated fabrication runs for the CRRES chip flight parts; and (7) publication of two papers: one on the split-cross bridge resistor and another on asymmetrical SRAM (static random access memory) cells for single-event upset analysis.

Amorphous-silicon module hot-spot testing

NASA Technical Reports Server (NTRS)

Gonzalez, C. C.

1985-01-01

Hot spot heating occurs when cell short-circuit current is lower than string operating current. Amorphous cell hot spot are tested to develop the techniques required for performing reverse bias testing of amorphous cells. Also, to quantify the response of amorphous cells to reverse biasing. Guidelines are developed from testing for reducing hot spot susceptibility of amorphous modules and to develop a qualification test for hot spot testing of amorphous modules. It is concluded that amorphous cells undergo hot spot heating similarly to crystalline cells. Comparison of results obtained with submodules versus actual modules indicate heating levels lower in actual modules. Module design must address hot spot testing and hot spot qualification test conducted on modules showed no instabilities and minor cell erosion.

Halbach Magnetic Rotor Development

NASA Technical Reports Server (NTRS)

Gallo, Christopher A.

2008-01-01

The NASA John H. Glenn Research Center has a wealth of experience in Halbach array technology through the Fundamental Aeronautics Program. The goals of the program include improving aircraft efficiency, reliability, and safety. The concept of a Halbach magnetically levitated electric aircraft motor will help reduce harmful emissions, reduce the Nation s dependence on fossil fuels, increase efficiency and reliability, reduce maintenance and decrease operating noise levels. Experimental hardware systems were developed in the GRC Engineering Development Division to validate the basic principles described herein and the theoretical work that was performed. A number of Halbach Magnetic rotors have been developed and tested under this program. A separate test hardware setup was developed to characterize each of the rotors. A second hardware setup was developed to test the levitation characteristics of the rotors. Each system focused around a unique Halbach array rotor. Each rotor required original design and fabrication techniques. A 4 in. diameter rotor was developed to test the radial levitation effects for use as a magnetic bearing. To show scalability from the 4 in. rotor, a 1 in. rotor was developed to also test radial levitation effects. The next rotor to be developed was 20 in. in diameter again to show scalability from the 4 in. rotor. An axial rotor was developed to determine the force that could be generated to position the rotor axially while it is rotating. With both radial and axial magnetic bearings, the rotor would be completely suspended magnetically. The purpose of this report is to document the development of a series of Halbach magnetic rotors to be used in testing. The design, fabrication and assembly of the rotors will be discussed as well as the hardware developed to test the rotors.

The Comparison Of In-Flight Pitot Static Calibration Method By Using Radio Altimeter As Reference with GPS and Tower Fly By Methods On CN235-100 MPA

NASA Astrophysics Data System (ADS)

Derajat; Hariowibowo, Hindawan

2018-04-01

The new proposed In-Flight Pitot Static Calibration Method has been carried out during Development and Qualification of CN235-100 MPA (Military Patrol Aircraft). This method is expected to reduce flight hours, less human resources required, no additional special equipment, simple analysis calculation and finally by using this method it is expected to automatically minimized operational cost. At The Indonesian Aerospace (IAe) Flight Test Center Division, the development and updating of new flight test technique and data analysis method as specially for flight physics test subject are still continued to be developed as long as it safety for flight and give additional value for the industrial side. More than 30 years, Flight Test Data Engineers at The Flight Test center Division work together with the Air Crew (Test Pilots, Co-Pilots, and Flight Test Engineers) to execute the flight test activity with standard procedure for both the existance or development test techniques and test data analysis. In this paper the approximation of mathematical model, data reduction and flight test technique of The In-Flight Pitot Static Calibration by using Radio Altimeter as reference will be described and the test results had been compared with another methods ie. By using Global Position System (GPS) and the traditional method (Tower Fly By Method) which were used previously during this Flight Test Program (Ref. [10]). The flight test data case are using CN235-100 MPA flight test data during development and Qualification Flight Test Program at Cazaux Airport, France, in June-November 2009 (Ref. [2]).

Portable Health Algorithms Test System

NASA Technical Reports Server (NTRS)

Melcher, Kevin J.; Wong, Edmond; Fulton, Christopher E.; Sowers, Thomas S.; Maul, William A.

2010-01-01

A document discusses the Portable Health Algorithms Test (PHALT) System, which has been designed as a means for evolving the maturity and credibility of algorithms developed to assess the health of aerospace systems. Comprising an integrated hardware-software environment, the PHALT system allows systems health management algorithms to be developed in a graphical programming environment, to be tested and refined using system simulation or test data playback, and to be evaluated in a real-time hardware-in-the-loop mode with a live test article. The integrated hardware and software development environment provides a seamless transition from algorithm development to real-time implementation. The portability of the hardware makes it quick and easy to transport between test facilities. This hard ware/software architecture is flexible enough to support a variety of diagnostic applications and test hardware, and the GUI-based rapid prototyping capability is sufficient to support development execution, and testing of custom diagnostic algorithms. The PHALT operating system supports execution of diagnostic algorithms under real-time constraints. PHALT can perform real-time capture and playback of test rig data with the ability to augment/ modify the data stream (e.g. inject simulated faults). It performs algorithm testing using a variety of data input sources, including real-time data acquisition, test data playback, and system simulations, and also provides system feedback to evaluate closed-loop diagnostic response and mitigation control.

Airworthiness and Flight Characteristics Test (A&FC) of the CH-47D helicopter

DTIC Science & Technology

1984-02-01

Development Specification which were evaluated during this test. The Advanced Flight Control System heading select capability and the pressure refueling...determine compliance with the CH-47D Prime Item Development Specification (PIDS). 2. This Directorate agrees with the report conclusions and...Evaluations (PAE) (refs 1 and 2. app A), climatic laboratory tests (ref 3), and icing tests (ref 4). The US Army Aviation Research and Development

When the Test Developer Does Not Speak the Target Language: The Use of Language Informants in the Test Development Process

ERIC Educational Resources Information Center

Ryan, Ève; Brunfaut, Tineke

2016-01-01

It is not unusual for tests in less-commonly taught languages (LCTLs) to be developed by an experienced item writer with no proficiency in the language being tested, in collaboration with a language informant who is a speaker of the target language, but lacks language assessment expertise. How this approach to item writing works in practice, and…

Evaluating Maintenance Performance: The Development and Tryout of Criterion Referenced Job Task Performance Tests for Electronic Maintenance. Final Report for Period January 1969-May 1974.

ERIC Educational Resources Information Center

Shriver, Edgar L.; Foley, John P., Jr.

A battery of criterion referenced job task performance tests (JIPT) for typical electronic maintenance activities were developed. The construction of a battery of such tests together with an appropriate scoring for reporting the results is detailed. The development of a Test Administrators Handbook also is described. This battery is considered to…

Advanced NSTS propulsion system verification study

NASA Technical Reports Server (NTRS)

Wood, Charles

1989-01-01

The merits of propulsion system development testing are discussed. The existing data base of technical reports and specialists is utilized in this investigation. The study encompassed a review of all available test reports of propulsion system development testing for the Saturn stages, the Titan stages, and the Space Shuttle main propulsion system. The knowledge on propulsion system development and system testing available from specialists and managers was also 'tapped' for inclusion.

Affordable Development and Optimization of CERMET Fuels for NTP Ground Testing

NASA Technical Reports Server (NTRS)

Hickman, Robert R.; Broadway, Jeramie W.; Mireles, Omar R.

2014-01-01

CERMET fuel materials for Nuclear Thermal Propulsion (NTP) are currently being developed at NASA's Marshall Space Flight Center. The work is part of NASA's Advanced Space Exploration Systems Nuclear Cryogenic Propulsion Stage (NCPS) Project. The goal of the FY12-14 project is to address critical NTP technology challenges and programmatic issues to establish confidence in the affordability and viability of an NTP system. A key enabling technology for an NCPS system is the fabrication of a stable high temperature nuclear fuel form. Although much of the technology was demonstrated during previous programs, there are currently no qualified fuel materials or processes. The work at MSFC is focused on developing critical materials and process technologies for manufacturing robust, full-scale CERMET fuels. Prototypical samples are being fabricated and tested in flowing hot hydrogen to understand processing and performance relationships. As part of this initial demonstration task, a final full scale element test will be performed to validate robust designs. The next phase of the project will focus on continued development and optimization of the fuel materials to enable future ground testing. The purpose of this paper is to provide a detailed overview of the CERMET fuel materials development plan. The overall CERMET fuel development path is shown in Figure 2. The activities begin prior to ATP for a ground reactor or engine system test and include materials and process optimization, hot hydrogen screening, material property testing, and irradiation testing. The goal of the development is to increase the maturity of the fuel form and reduce risk. One of the main accomplishmens of the current AES FY12-14 project was to develop dedicated laboratories at MSFC for the fabrication and testing of full length fuel elements. This capability will enable affordable, near term development and optimization of the CERMET fuels for future ground testing. Figure 2 provides a timeline of the development and optimization tasks for the AES FY15-17 follow on program.

48 CFR 225.7016 - Restriction on Ballistic Missile Defense research, development, test, and evaluation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Restriction on Ballistic Missile Defense research, development, test, and evaluation. 225.7016 Section 225.7016 Federal Acquisition... Acquisition 225.7016 Restriction on Ballistic Missile Defense research, development, test, and evaluation. [68...

75 FR 15443 - Advancing the Development of Diagnostic Tests and Biomarkers for Tuberculosis; Public Workshop...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-29

...] Advancing the Development of Diagnostic Tests and Biomarkers for Tuberculosis; Public Workshop; Request for... workshop entitled ``Advancing the Development of Diagnostic Tests and Biomarkers for Tuberculosis (TB... Tuberculosis in the United States, Committee on the Elimination of Tuberculosis in the United States, Division...

Development of a National Item Bank for Tests of Driving Knowledge.

ERIC Educational Resources Information Center

Pollock, William T.; McDole, Thomas L.

Materials intended for driving knowledge test development use by operational licensing and education agencies were prepared. Candidate test items were developed, using literature and operational practice sources, to reflect current state-of-knowledge with respect to principles of safe, efficient driving, to legal regulations, and to traffic…

Script Concordance Testing in Continuing Professional Development: Local or International Reference Panels?

ERIC Educational Resources Information Center

Pleguezuelos, E. M.; Hornos, E.; Dory, V.; Gagnon, R.; Malagrino, P.; Brailovsky, C. A.; Charlin, B.

2013-01-01

Context: The PRACTICUM Institute has developed large-scale international programs of on-line continuing professional development (CPD) based on self-testing and feedback using the Practicum Script Concordance Test© (PSCT). Aims: To examine the psychometric consequences of pooling the responses of panelists from different countries (composite…

78 FR 3019 - Privacy Act of 1974; Science & Technology Directorate-001 Research, Development, Test, and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-15

... biomedical and life sciences research; and subject matter experts who voluntarily consent to be included in a... 1974; Science & Technology Directorate-001 Research, Development, Test, and Evaluation Records System.../Science and Technology Directorate-001 Research, Development, Test, and Evaluation System of Records...

Developing a Drug Testing Policy at a Public University: Participant Perspectives.

ERIC Educational Resources Information Center

Griffin, Stephen O.; Keller, Adrienne; Cohn, Alan

2001-01-01

Although employee drug testing is widespread among private employers, the development of programs in the public sector has been slower due to constitutional law constraints. A qualitative approach presenting various participant perspectives may aid in developing an employee drug testing program. (Contains 41 references/notes.) (JOW)

INDOOR AIR EMISSIONS FROM OFFICE EQUIPMENT: TEST METHOD DEVELOPMENT AND POLLUTION PREVENTION OPPORTUNITIES

EPA Science Inventory

The report describes the development and evaluation of a large chamber test method for measuring emissions from dry-process photocopiers. The test method was developed in two phases. Phase 1 was a single-laboratory evaluation at Research Triangle Institute (RTI) using four, mid-r...

Alternatives to the fish early life-stage test: Developing a conceptual model for early fish development

EPA Science Inventory

Chronic fish toxicity is a key parameter for hazard classification and environmental risk assessment of chemicals, and the OECD 210 fish early life-stage (FELS) test is the primary guideline test used for various international regulatory programs. There exists a need to develop ...

Curriculum enrichment with self-testing activities in development of fundamental movement skills of first-grade children in Greece.

PubMed

Karabourniotis, Dimitrios; Evaggelinou, Christina; Tzetzis, George; Kourtessis, Thomas

2002-06-01

The purpose of this study was to investigate the effect of self-testing activities on the development of fundamental movement skills in first-grade children in Greece. Two groups of children were tested. The Control group (n = 23 children) received the regular 12-wk. physical education school program and the Experimental group (n = 22 children) received a 12-wk. skill-oriented program with an increasing allotment of self-testing activities. The Test of Gross Motor Development was used to assess fundamental movement skills, while the content areas of physical education courses were estimated with an assessment protocol, based on the interval recording system called the Academic Learning Time-Physical Education. A 2 x 2 repeated measures analysis of variance with group as the between factor and testing time (pretest vs posttest) as the repeated-measures factor was performed to assess differences between the two groups. A significant interaction of group with testing time was found for the Test of Gross Motor Development total score, with the Experimental group scoring higher then the Control group. A significant main effect was also found for test but not for group. This study provides evidence supporting the notion that a balanced allotment of the self-testing and game activities beyond the usual curriculum increases the fundamental motor-skill development of children. Also, it stresses the necessity for content and performance standards for the fundamental motor skills in educational programs. Finally, it seems that the Test of Gross Motor Development is a useful tool for the assessment of children's fundamental movement skills.

Extinguishing agent for magnesium fire, phases 5 and 6

NASA Astrophysics Data System (ADS)

Beeson, H. D.; Tapscott, R. E.; Mason, B. E.

1987-07-01

This report documents the validation testing of the extinguishing system for metal fires developed as part of Phases 1 to 4. The results of this validation testing form the basis of information from which draft military specifications necessary to procure the agent and the agent delivery system may be developed. The developed system was tested against a variety of large-scale metal fire scenarios and the capabilities of the system were assessed. In addition the response of the system to storage and to changes in ambient conditions was tested. Results of this testing revealed that the developed system represented a reliable metal fire extinguishing system that could control and extinguish very large metal fires. The specifications developed for the agent and for the delivery system are discussed in detail.

What factors are associated with good performance in children with cochlear implants? From the outcome of various language development tests, research on sensory and communicative disorders project in Japan: nagasaki experience.

PubMed

Kanda, Yukihiko; Kumagami, Hidetaka; Hara, Minoru; Sainoo, Yuzuru; Sato, Chisei; Yamamoto-Fukuda, Tomomi; Yoshida, Haruo; Ito, Akiko; Tanaka, Chiharu; Baba, Kyoko; Nakata, Ayaka; Tanaka, Hideo; Fukushima, Kunihiro; Kasai, Norio; Takahashi, Haruo

2012-04-01

We conducted multi-directional language development tests as a part of the Research on Sensory and Communicative Disorders (RSVD) in Japan. This report discusses findings as well as factors that led to better results in children with severe-profound hearing loss. We evaluated multiple language development tests in 33 Japanese children with cochlear implants (32 patients) and hearing aid (1 patient), including 1) Test for question and answer interaction development, 2) Word fluency test, 3) Japanese version of the Peabody picture vocabulary test-revised, 4) The standardized comprehension test of abstract words, 5) The screening test of reading and writing for Japanese primary school children, 6) The syntactic processing test of aphasia, 7) Criterion-referenced testing (CRT) for Japanese language and mathematics, 8) Pervasive development disorders ASJ rating scales, and 9) Raven's colored progressive matrices. Furthermore, we investigated the factors believed to account for the better performances in these tests. The first group, group A, consisted of 14 children with higher scores in all tests than the national average for children with hearing difficulty. The second group, group B, included 19 children that scored below the national average in any of the tests. Overall, the results show that 76.2% of the scores obtained by the children in these tests exceeded the national average scores of children with hearing difficulty. The children who finished above average on all tests had undergone a longer period of regular habilitation in our rehabilitation center, had their implants earlier in life, were exposed to more auditory verbal/oral communication in their education at affiliated institutions, and were more likely to have been integrated in a regular kindergarten before moving on to elementary school. In this study, we suggest that taking the above four factors into consideration will have an affect on the language development of children with severe-profound hearing loss.

Design development of graphite primary structures enables SSTO success

NASA Astrophysics Data System (ADS)

Biagiotti, V. A.; Yahiro, J. S.; Suh, Daniel E.; Hodges, Eric R.; Prior, Donald J.

1997-01-01

This paper describes the development of a graphite composite wing and a graphite composite intertank primary structure for application toward Single-Stage to Orbit space vehicles such as those under development in NASA's X-33/Reusable Launch Vehicle (RLV) Program. The trade study and designs are based on a Rockwell vertical take-off and horizontal landing (VTHL) wing-body RLV vehicle. Northrop Grumman's approach using a building block development technique is described. Composite Graphite/Bismaleimide (Gr/BMI) material characterization test results are presented. Unique intertank and wing composite subcomponent test article designs are described and test results to date are presented. Wing and intertank Full Scale Section Test Article (FSTA) objectives and designs are outlined. Trade studies, supporting building block testing, and FSTA demonstrations combine to develop graphite primary structure composite technology that enables developing X-33/RLV design programs to meet critical SSTO structural weight and operations performance criteria.

Development and testing of the infrared radiometer for the Mariner Venus/Mercury 1973 spacecraft

NASA Technical Reports Server (NTRS)

Clarke, T. C.

1975-01-01

The science objectives, development history, functional description, and testing of the Mariner Venus/Mercury 1973 infrared radiometer are discussed. Included in the functional description section is a thorough discussion of the IRR optical system, electronic operation, and thermal control. Signal development and its conversion to engineering units is traced, starting with the radiant space object, passing through the IRR optics and electronics, and culminating with data number development and interpretation. The test program section includes discussion of IRR calibration and alignment verification. Finally, the problems and failures encountered by the IRR during the period of its development and testing are reviewed.

The history and development of FETAX (ASTM standard guide, E-1439 on conducting the frog embryo teratogenesis Assay-Xenopus)

USGS Publications Warehouse

Dumont, J.N.; Bantle, J.A.; Linder, G.; ,

2003-01-01

The energy crisis of the 1970's and 1980's prompted the search for alternative sources of fuel. With development of alternate sources of energy, concerns for biological resources potentially adversely impacted by these alternative technologies also heightened. For example, few biological tests were available at the time to study toxic effects of effluents on surface waters likely to serve as receiving streams for energy-production facilities; hence, we began to use Xenopus laevis embryos as test organisms to examine potential toxic effects associated with these effluents upon entering aquatic systems. As studies focused on potential adverse effects on aquatic systems continued, a test procedure was developed that led to the initial standardization of FETAX. Other .than a limited number of aquatic toxicity tests that used fathead minnows and cold-water fishes such as rainbow trout, X. laevis represented the only other aquatic vertebrate test system readily available to evaluate complex effluents. With numerous laboratories collaborating, the test with X. laevis was refined, improved, and developed as ASTM E-1439, Standard Guide for the Conducting Frog Embryo Teratogenesis Assay-Xenopus (FETAX). Collabrative work in the 1990s yielded procedural enhancements, for example, development of standard test solutions and exposure methods to handle volatile organics and hydrophobic compounds. As part of the ASTM process, a collaborative interlaboratory study was performed to determine the repeatability and reliability of FETAX. Parallel to these efforts, methods were also developed to test sediments and soils, and in situ test methods were developed to address "lab-to-field extrapolation errors" that could influence the method's use in ecological risk assessments. Additionally, a metabolic activation system composed of rat liver microsomes was developed which made FETAX more relevant to mammalian studies.

Design, analysis, and test verification of advanced encapsulation systems

NASA Technical Reports Server (NTRS)

Mardesich, N.; Minning, C.

1982-01-01

Design sensitivities are established for the development of photovoltaic module criteria and the definition of needed research tasks. The program consists of three phases. In Phase I, analytical models were developed to perform optical, thermal, electrical, and structural analyses on candidate encapsulation systems. From these analyses several candidate systems will be selected for qualification testing during Phase II. Additionally, during Phase II, test specimens of various types will be constructed and tested to determine the validity of the analysis methodology developed in Phase I. In Phse III, a finalized optimum design based on knowledge gained in Phase I and II will be developed. All verification testing was completed during this period. Preliminary results and observations are discussed. Descriptions of the thermal, thermal structural, and structural deflection test setups are included.

Halogen occultation experiment intergrated test plan

NASA Technical Reports Server (NTRS)

Mauldin, L. E., III; Butterfield, A. J.

1986-01-01

The test program plan is presented for the Halogen Occultation Experiment (HALOE) instrument, which is being developed in-house at the Langley Research Center for the Upper Atmosphere Research Satellite (UARS). This comprehensive test program was developed to demonstrate that the HALOE instrument meets its performance requirements and maintains integrity through UARS flight environments. Each component, subsystem, and system level test is described in sufficient detail to allow development of the necessary test setups and test procedures. Additionally, the management system for implementing this test program is given. The HALOE instrument is a gas correlation radiometer that measures vertical distribution of eight upper atmospheric constituents: O3, HC1, HF, NO, CH4, H2O, NO2, and CO2.

Development and testing of a source subsystem for the supporting development PMAD DC test bed

NASA Technical Reports Server (NTRS)

Button, Robert M.

1991-01-01

The supporting Development Power Management and Distribution (PMAD) DC Test Bed is described. Its benefits to the Space Station Freedom Electrical Power System design are discussed along with a short description of how the PMAD DC Test Bed was systematically integrated. The Source Subsystem of the PMAD DC Test Bed consisting of a Sequential Shunt Unit (SSU) and a Battery Charge/Discharge Unit (BCDU) is introduced. The SSU is described in detail and component level test data is presented. Next, the BCDU's operation and design is given along with component level test data. The Source Subsystem is then presented and early data given to demonstrate an effective subsystem design.

The Implications of Family Size and Birth Order for Test Scores and Behavioral Development

ERIC Educational Resources Information Center

Silles, Mary A.

2010-01-01

This article, using longitudinal data from the National Child Development Study, presents new evidence on the effects of family size and birth order on test scores and behavioral development at age 7, 11 and 16. Sibling size is shown to have an adverse causal effect on test scores and behavioral development. For any given family size, first-borns…

Mobility Research and Development (Briefing charts)

DTIC Science & Technology

2016-03-17

Mobility Research & Development Dr. Paramsothy Jayakumar, STE, Analytics Tank Automotive Research, Development and Engineering Center Research...Mobility Model (NRMM) • Dr. M. G. Bekker of TARDEC is the “Father of Terrain-Vehicle Systems ” • NRMM was developed in 1960-70 by TARDEC and ERDC...Blocks: Scaled Experiments Particle Image Velocimetry Pressure – Sinkage Test Direct Shear Test Simulations Single Wheel Test Plate width = 50 mm

USL/DBMS NASA/PC R and D project system testing standards

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Kavi, Srinu; Moreau, Dennis R.; Yan, Lin

1984-01-01

A set of system testing standards to be used in the development of all C software within the NASA/PC Research and Development Project is established. Testing will be considered in two phases: the program testing phase and the system testing phase. The objective of these standards is to provide guidelines for the planning and conduct of program and software system testing.

Development of an accelerated reliability test schedule for terrestrial solar cells

NASA Technical Reports Server (NTRS)

Lathrop, J. W.; Prince, J. L.

1981-01-01

An accelerated test schedule using a minimum amount of tests and a minimum number of cells has been developed on the basis of stress test results obtained from more than 1500 cells of seven different cell types. The proposed tests, which include bias-temperature, bias-temperature-humidity, power cycle, thermal cycle, and thermal shock tests, use as little as 10 and up to 25 cells, depending on the test type.

Development and Evaluation of a Performance Modeling Flight Test Approach Based on Quasi Steady-State Maneuvers

NASA Technical Reports Server (NTRS)

Yechout, T. R.; Braman, K. B.

1984-01-01

The development, implementation and flight test evaluation of a performance modeling technique which required a limited amount of quasisteady state flight test data to predict the overall one g performance characteristics of an aircraft. The concept definition phase of the program include development of: (1) the relationship for defining aerodynamic characteristics from quasi steady state maneuvers; (2) a simplified in flight thrust and airflow prediction technique; (3) a flight test maneuvering sequence which efficiently provided definition of baseline aerodynamic and engine characteristics including power effects on lift and drag; and (4) the algorithms necessary for cruise and flight trajectory predictions. Implementation of the concept include design of the overall flight test data flow, definition of instrumentation system and ground test requirements, development and verification of all applicable software and consolidation of the overall requirements in a flight test plan.

Turbopumps for cryogenic upper stage engines. [fabrication and evaluation of turbine pumps for liquid hydrogen and liquid oxygen

NASA Technical Reports Server (NTRS)

Zachary, A. T.; Csomor, A.; Tignac, L. L.

1973-01-01

Small, high-performance LO2 and LH2 turbopump assembly configurations were selected, detail designs were prepared and two of each unit were fabricated with each unit consisting of pump, turbine gas generator, and appropriate controls. Following fabrication, development testing was conducted on each type to demonstrate performance, durability, transient characteristics, and heat transfer under simulated altitude conditions. Following successful completion of development effort, the two LO2 turbopump units and one LH2 turbopump unit were acceptance tested as specified. Inspection of the units following development testing revealed no deleterious effects of testing. The test results of LO2 turbopump assembly testing correlated well with predicted performance while the LH2 turbopump test results, though generally consistent with predicted values, did show lower than anticipated developed head at the design point and in the high flow range of operation.

Performance and Environmental Test Results of the High Voltage Hall Accelerator Engineering Development Unit

NASA Technical Reports Server (NTRS)

Kamhawi, Hani; Haag, Thomas; Huang, Wensheng; Shastry, Rohit; Pinero, Luis; Peterson, Todd; Mathers, Alex

2012-01-01

NASA Science Mission Directorate's In-Space Propulsion Technology Program is sponsoring the development of a 3.5 kW-class engineering development unit Hall thruster for implementation in NASA science and exploration missions. NASA Glenn and Aerojet are developing a high fidelity high voltage Hall accelerator that can achieve specific impulse magnitudes greater than 2,700 seconds and xenon throughput capability in excess of 300 kilograms. Performance, plume mappings, thermal characterization, and vibration tests of the high voltage Hall accelerator engineering development unit have been performed. Performance test results indicated that at 3.9 kW the thruster achieved a total thrust efficiency and specific impulse of 58%, and 2,700 sec, respectively. Thermal characterization tests indicated that the thruster component temperatures were within the prescribed material maximum operating temperature limits during full power thruster operation. Finally, thruster vibration tests indicated that the thruster survived the 3-axes qualification full-level random vibration test series. Pre and post-vibration test performance mappings indicated almost identical thruster performance. Finally, an update on the development progress of a power processing unit and a xenon feed system is provided.

Structural Benchmark Creep Testing for Microcast MarM-247 Advanced Stirling Convertor E2 Heater Head Test Article SN18

NASA Technical Reports Server (NTRS)

Krause, David L.; Brewer, Ethan J.; Pawlik, Ralph

2013-01-01

This report provides test methodology details and qualitative results for the first structural benchmark creep test of an Advanced Stirling Convertor (ASC) heater head of ASC-E2 design heritage. The test article was recovered from a flight-like Microcast MarM-247 heater head specimen previously used in helium permeability testing. The test article was utilized for benchmark creep test rig preparation, wall thickness and diametral laser scan hardware metrological developments, and induction heater custom coil experiments. In addition, a benchmark creep test was performed, terminated after one week when through-thickness cracks propagated at thermocouple weld locations. Following this, it was used to develop a unique temperature measurement methodology using contact thermocouples, thereby enabling future benchmark testing to be performed without the use of conventional welded thermocouples, proven problematic for the alloy. This report includes an overview of heater head structural benchmark creep testing, the origin of this particular test article, test configuration developments accomplished using the test article, creep predictions for its benchmark creep test, qualitative structural benchmark creep test results, and a short summary.

Performance Testing of a Trace Contaminant Control Subassembly for the International Space Station

NASA Technical Reports Server (NTRS)

Perry, J. L.; Curtis, R. E.; Alexandre, K. L.; Ruggiero, L. L.; Shtessel, N.

1998-01-01

As part of the International Space Station (ISS) Trace Contaminant Control Subassembly (TCCS) development, a performance test has been conducted to provide reference data for flight verification analyses. This test, which used the U.S. Habitation Module (U.S. Hab) TCCS as the test article, was designed to add to the existing database on TCCS performance. Included in this database are results obtained during ISS development testing; testing of functionally similar TCCS prototype units; and bench scale testing of activated charcoal, oxidation catalyst, and granular lithium hydroxide (LiOH). The present database has served as the basis for the development and validation of a computerized TCCS process simulation model. This model serves as the primary means for verifying the ISS TCCS performance. In order to mitigate risk associated with this verification approach, the U.S. Hab TCCS performance test provides an additional set of data which serve to anchor both the process model and previously-obtained development test data to flight hardware performance. The following discussion provides relevant background followed by a summary of the test hardware, objectives, requirements, and facilities. Facility and test article performance during the test is summarized, test results are presented, and the TCCS's performance relative to past test experience is discussed. Performance predictions made with the TCCS process model are compared with the U.S. Hab TCCS test results to demonstrate its validation.

Pre- and post-test evaluation of a project to facilitate research development in practice in a hospital setting.

PubMed

Clifford, C; Murray, S

2001-12-01

This paper describes a project designed to facilitate the use of research in nursing practice in one acute hospital. A university team worked in collaboration with staff from the hospital to develop and evaluate the impact of development work designed to enhance knowledge and use of research in practice. A research utilization questionnaire was administered as a pre-test (stage 1); a development phase was implemented (stage 2) and a post-test survey (stage 3) was administered to evaluate the impact of the development work. In stage 1, the total population of nursing and midwifery staff in the hospital (n=473) were targeted and 235 returned the questionnaire, giving a response rate of 50%. Data from the pre-test and focus group discussions with staff were used to plan stage 2 of the project. The development stage involved an educational strand in which open learning research materials were made available to staff, who were also offered tutorial support in their learning. A second strand supported the development of clinical research projects and funds were identified for clinical staff to apply for project development awards to enable them to develop skills in research and development activity under the supervision of a research fellow. Stage 3 involved a post-test survey of staff who had completed the questionnaire in stage 1 (n=81). There were no significant differences in findings between the pre-test and post-test. Qualitative data from those involved in the clinical projects in stage 2 indicated factors impacting on the feasibility of undertaking research in practice.

Automated Formal Testing of C API Using T2C Framework

NASA Astrophysics Data System (ADS)

Khoroshilov, Alexey V.; Rubanov, Vladimir V.; Shatokhin, Eugene A.

A problem of automated test development for checking basic functionality of program interfaces (API) is discussed. Different technologies and corresponding tools are surveyed. And T2C technology developed in ISPRAS is presented. The technology and associated tools facilitate development of "medium quality" (and "medium cost") tests. An important feature of T2C technology is that it enforces that each check in a developed test is explicitly linked to the corresponding place in the standard. T2C tools provide convenient means to create such linkage. The results of using T2C are considered by example of a project for testing interfaces of Linux system libraries defined by the LSB standard.

A software framework for developing measurement applications under variable requirements.

PubMed

Arpaia, Pasquale; Buzio, Marco; Fiscarelli, Lucio; Inglese, Vitaliano

2012-11-01

A framework for easily developing software for measurement and test applications under highly and fast-varying requirements is proposed. The framework allows the software quality, in terms of flexibility, usability, and maintainability, to be maximized. Furthermore, the development effort is reduced and finalized, by relieving the test engineer of development details. The framework can be configured for satisfying a large set of measurement applications in a generic field for an industrial test division, a test laboratory, or a research center. As an experimental case study, the design, the implementation, and the assessment inside the application to a measurement scenario of magnet testing at the European Organization for Nuclear Research is reported.

MCC/shuttle test plan. Volume 1: Philosophy and guidelines

NASA Technical Reports Server (NTRS)

1976-01-01

The Mission Control Center/Shuttle Test Plan is defined from development through operations to a level of detail which will support the National Aeronautics and Space Administration and contractor management in the following areas: test management, test tool development, and resource and schedule planning.

24 CFR 3280.810 - Electrical testing.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 24 Housing and Urban Development 5 2014-04-01 2014-04-01 false Electrical testing. 3280.810... URBAN DEVELOPMENT MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS Electrical Systems § 3280.810 Electrical testing. (a) Dielectric strength test. The wiring of each manufactured home shall be subjected to...

24 CFR 3280.810 - Electrical testing.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 5 2012-04-01 2012-04-01 false Electrical testing. 3280.810... URBAN DEVELOPMENT MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS Electrical Systems § 3280.810 Electrical testing. (a) Dielectric strength test. The wiring of each manufactured home shall be subjected to...

24 CFR 3280.810 - Electrical testing.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 24 Housing and Urban Development 5 2013-04-01 2013-04-01 false Electrical testing. 3280.810... URBAN DEVELOPMENT MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS Electrical Systems § 3280.810 Electrical testing. (a) Dielectric strength test. The wiring of each manufactured home shall be subjected to...

Status of the Flooding Fragility Testing Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pope, C. L.; Savage, B.; Bhandari, B.

2016-06-01

This report provides an update on research addressing nuclear power plant component reliability under flooding conditions. The research includes use of the Component Flooding Evaluation Laboratory (CFEL) where individual components and component subassemblies will be tested to failure under various flooding conditions. The resulting component reliability data can then be incorporated with risk simulation strategies to provide a more thorough representation of overall plant risk. The CFEL development strategy consists of four interleaved phases. Phase 1 addresses design and application of CFEL with water rise and water spray capabilities allowing testing of passive and active components including fully electrified components.more » Phase 2 addresses research into wave generation techniques followed by the design and addition of the wave generation capability to CFEL. Phase 3 addresses methodology development activities including small scale component testing, development of full scale component testing protocol, and simulation techniques including Smoothed Particle Hydrodynamic (SPH) based computer codes. Phase 4 involves full scale component testing including work on full scale component testing in a surrogate CFEL testing apparatus.« less

Development and Simulation Testing of a Computerized Adaptive Version of the Philadelphia Naming Test

ERIC Educational Resources Information Center

Hula, William D.; Kellough, Stacey; Fergadiotis, Gerasimos

2015-01-01

Purpose: The purpose of this study was to develop a computerized adaptive test (CAT) version of the Philadelphia Naming Test (PNT; Roach, Schwartz, Martin, Grewal, & Brecher, 1996), to reduce test length while maximizing measurement precision. This article is a direct extension of a companion article (Fergadiotis, Kellough, & Hula, 2015),…

Validation of laboratory-scale recycling test method of paper PSA label products

Treesearch

Carl Houtman; Karen Scallon; Richard Oldack

2008-01-01

Starting with test methods and a specification developed by the U.S. Postal Service (USPS) Environmentally Benign Pressure Sensitive Adhesive Postage Stamp Program, a laboratory-scale test method and a specification were developed and validated for pressure-sensitive adhesive labels, By comparing results from this new test method and pilot-scale tests, which have been...

Effects of L1 Definitions and Cognate Status of Test Items on the Vocabulary Size Test

ERIC Educational Resources Information Center

Elgort, Irina

2013-01-01

This study examines the development and evaluation of a bilingual Vocabulary Size Test (VST, Nation, 2006). A bilingual (English-Russian) test was developed and administered to 121 intermediate proficiency EFL learners (native speakers of Russian), alongside the original monolingual (English-only) version of the test. A comparison of the bilingual…

78 FR 72534 - Policy Statement on the Principles for Development and Distribution of Annual Stress Test Scenarios

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-03

... Development and Distribution of Annual Stress Test Scenarios AGENCY: Federal Deposit Insurance Corporation... (``covered banks'') to conduct annual stress tests, report the results of such stress tests to the... summary of the results of the stress tests. On October 15, 2012, the FDIC published in the Federal...

77 FR 69553 - Policy Statement on the Principles for Development and Distribution of Annual Stress Test Scenarios

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-20

... Development and Distribution of Annual Stress Test Scenarios AGENCY: Federal Deposit Insurance Corporation... distributing the stress test scenarios for the annual stress tests required by the Dodd- Frank Wall Street Reform and Consumer Protection Act of 2010 as implemented by the Annual Stress Test final rule (``Stress...

"MSTGen": Simulated Data Generator for Multistage Testing

ERIC Educational Resources Information Center

Han, Kyung T.

2013-01-01

Multistage testing, or MST, was developed as an alternative to computerized adaptive testing (CAT) for applications in which it is preferable to administer a test at the level of item sets (i.e., modules). As with CAT, the simulation technique in MST plays a critical role in the development and maintenance of tests. "MSTGen," a new MST…

Early Education Screening Test Battery of Basic Skills Development: Criteria for Personalizing Programs.

ERIC Educational Resources Information Center

University City School District, MO.

The development and content of the Early Education Screening Test Battery are described elsewhere (TM 000 184). This report provides norms for the Gross Motor Test (GMO), Visual-Motor Integration (VMI), four scales of the Illinois Test of Psycholinguistic Abilities (ITPA), Peabody Picture Vocabulary Test (PPVT), and the Behavior Rating Scale…

EHR based Genetic Testing Knowledge Base (iGTKB) Development

PubMed Central

2015-01-01

Background The gap between a large growing number of genetic tests and a suboptimal clinical workflow of incorporating these tests into regular clinical practice poses barriers to effective reliance on advanced genetic technologies to improve quality of healthcare. A promising solution to fill this gap is to develop an intelligent genetic test recommendation system that not only can provide a comprehensive view of genetic tests as education resources, but also can recommend the most appropriate genetic tests to patients based on clinical evidence. In this study, we developed an EHR based Genetic Testing Knowledge Base for Individualized Medicine (iGTKB). Methods We extracted genetic testing information and patient medical records from EHR systems at Mayo Clinic. Clinical features have been semi-automatically annotated from the clinical notes by applying a Natural Language Processing (NLP) tool, MedTagger suite. To prioritize clinical features for each genetic test, we compared odds ratio across four population groups. Genetic tests, genetic disorders and clinical features with their odds ratios have been applied to establish iGTKB, which is to be integrated into the Genetic Testing Ontology (GTO). Results Overall, there are five genetic tests operated with sample size greater than 100 in 2013 at Mayo Clinic. A total of 1,450 patients who was tested by one of the five genetic tests have been selected. We assembled 243 clinical features from the Human Phenotype Ontology (HPO) for these five genetic tests. There are 60 clinical features with at least one mention in clinical notes of patients taking the test. Twenty-eight clinical features with high odds ratio (greater than 1) have been selected as dominant features and deposited into iGTKB with their associated information about genetic tests and genetic disorders. Conclusions In this study, we developed an EHR based genetic testing knowledge base, iGTKB. iGTKB will be integrated into the GTO by providing relevant clinical evidence, and ultimately to support development of genetic testing recommendation system, iGenetics. PMID:26606281

EHR based Genetic Testing Knowledge Base (iGTKB) Development.

PubMed

Zhu, Qian; Liu, Hongfang; Chute, Christopher G; Ferber, Matthew

2015-01-01

The gap between a large growing number of genetic tests and a suboptimal clinical workflow of incorporating these tests into regular clinical practice poses barriers to effective reliance on advanced genetic technologies to improve quality of healthcare. A promising solution to fill this gap is to develop an intelligent genetic test recommendation system that not only can provide a comprehensive view of genetic tests as education resources, but also can recommend the most appropriate genetic tests to patients based on clinical evidence. In this study, we developed an EHR based Genetic Testing Knowledge Base for Individualized Medicine (iGTKB). We extracted genetic testing information and patient medical records from EHR systems at Mayo Clinic. Clinical features have been semi-automatically annotated from the clinical notes by applying a Natural Language Processing (NLP) tool, MedTagger suite. To prioritize clinical features for each genetic test, we compared odds ratio across four population groups. Genetic tests, genetic disorders and clinical features with their odds ratios have been applied to establish iGTKB, which is to be integrated into the Genetic Testing Ontology (GTO). Overall, there are five genetic tests operated with sample size greater than 100 in 2013 at Mayo Clinic. A total of 1,450 patients who was tested by one of the five genetic tests have been selected. We assembled 243 clinical features from the Human Phenotype Ontology (HPO) for these five genetic tests. There are 60 clinical features with at least one mention in clinical notes of patients taking the test. Twenty-eight clinical features with high odds ratio (greater than 1) have been selected as dominant features and deposited into iGTKB with their associated information about genetic tests and genetic disorders. In this study, we developed an EHR based genetic testing knowledge base, iGTKB. iGTKB will be integrated into the GTO by providing relevant clinical evidence, and ultimately to support development of genetic testing recommendation system, iGenetics.

Development Instrument’s Learning of Physics Through Scientific Inquiry Model Based Batak Culture to Improve Science Process Skill and Student’s Curiosity

NASA Astrophysics Data System (ADS)

Nasution, Derlina; Syahreni Harahap, Putri; Harahap, Marabangun

2018-03-01

This research aims to: (1) developed a instrument’s learning (lesson plan, worksheet, student’s book, teacher’s guide book, and instrument test) of physics learning through scientific inquiry learning model based Batak culture to achieve skills improvement process of science students and the students’ curiosity; (2) describe the quality of the result of develop instrument’s learning in high school using scientific inquiry learning model based Batak culture (lesson plan, worksheet, student’s book, teacher’s guide book, and instrument test) to achieve the science process skill improvement of students and the student curiosity. This research is research development. This research developed a instrument’s learning of physics by using a development model that is adapted from the development model Thiagarajan, Semmel, and Semmel. The stages are traversed until retrieved a valid physics instrument’s learning, practical, and effective includes :(1) definition phase, (2) the planning phase, and (3) stages of development. Test performed include expert test/validation testing experts, small groups, and test classes is limited. Test classes are limited to do in SMAN 1 Padang Bolak alternating on a class X MIA. This research resulted in: 1) the learning of physics static fluid material specially for high school grade 10th consisted of (lesson plan, worksheet, student’s book, teacher’s guide book, and instrument test) and quality worthy of use in the learning process; 2) each component of the instrument’s learning meet the criteria have valid learning, practical, and effective way to reach the science process skill improvement and curiosity in students.

PSK Shift Timing Information Detection Using Image Processing and a Matched Filter

DTIC Science & Technology

2009-09-01

phase shifts are enhanced.  Develop, design, and test the resulting phase shift identification scheme. xx  Develop, design, and test an optional...and the resulting phase shift identification algorithm is investigated for SNR levels in the range -2dB to 12 dB. Detection performances are derived...test the resulting phase shift identification scheme.  Develop, design, and test an optional analysis window overlapping technique to improve phase

Development of robotics facility docking test hardware

NASA Technical Reports Server (NTRS)

Loughead, T. E.; Winkler, R. V.

1984-01-01

Design and fabricate test hardware for NASA's George C. Marshall Space Flight Center (MSFC) are reported. A docking device conceptually developed was fabricated, and two docking targets which provide high and low mass docking loads were required and were represented by an aft 61.0 cm section of a Hubble space telescope (ST) mockup and an upgrading of an existing multimission modular spacecraft (MSS) mockup respectively. A test plan is developed for testing the hardware.

HIV testing updates and challenges: when regulatory caution and public health imperatives collide.

PubMed

Branson, Bernard M

2015-03-01

Numerous improvements in HIV testing technology led recently to the first revision of recommendations for diagnostic laboratory testing in the USA in 25 years. Developments in HIV testing continue to produce tests that identify HIV infection earlier with faster turnaround times for test results. These play an important role in identifying HIV infection during the highly infectious acute phase, which has implication for both patient management and public health interventions to control the spread of HIV. Access to these developments, however, is often delayed by the regulatory apparatus for approval and oversight of HIV testing in the USA. This article summarizes recent developments in HIV diagnostic testing technology, outlines their implications for clinical management and public health, describes current systems of regulatory oversight for HIV testing in the USA, and proposes alternatives that could expedite access to improved tests as they become available.

Antimicrobial Testing Methods & Procedures Developed by EPA's Microbiology Laboratory

EPA Pesticide Factsheets

We develop antimicrobial testing methods and standard operating procedures to measure the effectiveness of hard surface disinfectants against a variety of microorganisms. Find methods and procedures for antimicrobial testing.

Continuing challenges for computer-based neuropsychological tests.

PubMed

Letz, Richard

2003-08-01

A number of issues critical to the development of computer-based neuropsychological testing systems that remain continuing challenges to their widespread use in occupational and environmental health are reviewed. Several computer-based neuropsychological testing systems have been developed over the last 20 years, and they have contributed substantially to the study of neurologic effects of a number of environmental exposures. However, many are no longer supported and do not run on contemporary personal computer operating systems. Issues that are continuing challenges for development of computer-based neuropsychological tests in environmental and occupational health are discussed: (1) some current technological trends that generally make test development more difficult; (2) lack of availability of usable speech recognition of the type required for computer-based testing systems; (3) implementing computer-based procedures and tasks that are improvements over, not just adaptations of, their manually-administered predecessors; (4) implementing tests of a wider range of memory functions than the limited range now available; (5) paying more attention to motivational influences that affect the reliability and validity of computer-based measurements; and (6) increasing the usability of and audience for computer-based systems. Partial solutions to some of these challenges are offered. The challenges posed by current technological trends are substantial and generally beyond the control of testing system developers. Widespread acceptance of the "tablet PC" and implementation of accurate small vocabulary, discrete, speaker-independent speech recognition would enable revolutionary improvements to computer-based testing systems, particularly for testing memory functions not covered in existing systems. Dynamic, adaptive procedures, particularly ones based on item-response theory (IRT) and computerized-adaptive testing (CAT) methods, will be implemented in new tests that will be more efficient, reliable, and valid than existing test procedures. These additional developments, along with implementation of innovative reporting formats, are necessary for more widespread acceptance of the testing systems.

Carbon-carbon primary structure for SSTO vehicles

NASA Astrophysics Data System (ADS)

Croop, Harold C.; Lowndes, Holland B.

1997-01-01

A hot structures development program is nearing completion to validate use of carbon-carbon composite structure for primary load carrying members in a single-stage-to-orbit, or SSTO, vehicle. A four phase program was pursued which involved design development and fabrication of a full-scale wing torque box demonstration component. The design development included vehicle and component selection, design criteria and approach, design data development, demonstration component design and analysis, test fixture design and analysis, demonstration component test planning, and high temperature test instrumentation development. The fabrication effort encompassed fabrication of structural elements for mechanical property verification as well as fabrication of the demonstration component itself and associated test fixturing. The demonstration component features 3D woven graphite preforms, integral spars, oxidation inhibited matrix, chemical vapor deposited (CVD) SiC oxidation protection coating, and ceramic matrix composite fasteners. The demonstration component has been delivered to the United States Air Force (USAF) for testing in the Wright Laboratory Structural Test Facility, WPAFB, OH. Multiple thermal-mechanical load cycles will be applied simulating two atmospheric cruise missions and one orbital mission. This paper discusses the overall approach to validation testing of the wing box component and presents some preliminary analytical test predictions.

Development and Initial Testing of the Tiltrotor Test Rig

NASA Technical Reports Server (NTRS)

Acree, C. W., Jr.; Sheikman, A. L.

2018-01-01

The NASA Tiltrotor Test Rig (TTR) is a new, large-scale proprotor test system, developed jointly with the U.S. Army and Air Force, to develop a new, large-scale proprotor test system for the National Full-Scale Aerodynamics Complex (NFAC). The TTR is designed to test advanced proprotors up to 26 feet in diameter at speeds up to 300 knots, and even larger rotors at lower airspeeds. This combination of size and speed is unprecedented and is necessary for research into 21st-century tiltrotors and other advanced rotorcraft concepts. The TTR will provide critical data for validation of state-of-the-art design and analysis tools.

Black Box Testing: Experiments with Runway Incursion Advisory Alerting System

NASA Technical Reports Server (NTRS)

Mukkamala, Ravi

2005-01-01

This report summarizes our research findings on the Black box testing of Runway Incursion Advisory Alerting System (RIAAS) and Runway Safety Monitor (RSM) system. Developing automated testing software for such systems has been a problem because of the extensive information that has to be processed. Customized software solutions have been proposed. However, they are time consuming to develop. Here, we present a less expensive, and a more general test platform that is capable of performing complete black box testing. The technique is based on the classification of the anomalies that arise during Monte Carlo simulations. In addition, we also discuss a generalized testing tool (prototype) that we have developed.

Development of a Dielectric-Loaded Accelerator Test Facility Based on an X-Band Magnicon Amplifier

NASA Astrophysics Data System (ADS)

Gold, S. H.; Kinkead, A. K.; Gai, W.; Power, J. G.; Konecny, R.; Jing, C.; Tantawi, S. G.; Nantista, C. D.; Hu, Y.; Du, X.; Tang, C.; Lin, Y.; Bruce, R. W.; Bruce, R. L.; Fliflet, A. W.; Lewis, D.

2006-01-01

The Naval Research Laboratory (NRL) and Argonne National Laboratory (ANL), in collaboration with the Stanford Linear Accelerator Center (SLAC), are developing a dielectric-loaded accelerator (DLA) test facility powered by the 11.424-GHz magnicon amplifier that was developed jointly by NRL and Omega-P, Inc. Thus far, DLA structures developed by ANL have been tested at the NRL Magnicon Facility without injected electrons, including tests of alumina and magnesium calcium titanate structures at gradients up to ˜8 MV/m. The next step is to inject electrons in order to build a compact DLA test accelerator. The Accelerator Laboratory of Tsinghua University in Beijing, China has developed a 5-MeV electron injector for the accelerator, and SLAC is developing a means to combine the two magnicon output arms, and to drive the injector and an accelerator section with separate control of the power ratio and relative phase. Also, RWBruce Associates, working with NRL, is developing a means to join ceramic tubes to produce long accelerating sections using a microwave brazing process. The installation and commissioning of the first dielectric-loaded test accelerator, including injector, DLA structure, and spectrometer, should take place within the next year.

Robotic Lunar Lander Development Status

NASA Technical Reports Server (NTRS)

Ballard, Benjamin; Cohen, Barbara A.; McGee, Timothy; Reed, Cheryl

2012-01-01

NASA Marshall Space Flight Center and John Hopkins University Applied Physics Laboratory have developed several mission concepts to place scientific and exploration payloads ranging from 10 kg to more than 200 kg on the surface of the moon. The mission concepts all use a small versatile lander that is capable of precision landing. The results to date of the lunar lander development risk reduction activities including high pressure propulsion system testing, structure and mechanism development and testing, and long cycle time battery testing will be addressed. The most visible elements of the risk reduction program are two fully autonomous lander flight test vehicles. The first utilized a high pressure cold gas system (Cold Gas Test Article) with limited flight durations while the subsequent test vehicle, known as the Warm Gas Test Article, utilizes hydrogen peroxide propellant resulting in significantly longer flight times and the ability to more fully exercise flight sensors and algorithms. The development of the Warm Gas Test Article is a system demonstration and was designed with similarity to an actual lunar lander including energy absorbing landing legs, pulsing thrusters, and flight-like software implementation. A set of outdoor flight tests to demonstrate the initial objectives of the WGTA program was completed in Nov. 2011, and will be discussed.

NASA's Robotic Lunar Lander Development Program

NASA Technical Reports Server (NTRS)

Ballard, Benjamin W.; Reed, Cheryl L. B.; Artis, David; Cole, Tim; Eng, Doug S.; Kubota, Sanae; Lafferty, Paul; McGee, Timothy; Morese, Brian J.; Chavers, Gregory;

Recent advances in testing of microsphere drug delivery systems.

PubMed

Andhariya, Janki V; Burgess, Diane J

2016-01-01

This review discusses advances in the field of microsphere testing. In vitro release-testing methods such as sample and separate, dialysis membrane sacs and USP apparatus IV have been used for microspheres. Based on comparisons of these methods, USP apparatus IV is currently the method of choice. Accelerated in vitro release tests have been developed to shorten the testing time for quality control purposes. In vitro-in vivo correlations using real-time and accelerated release data have been developed, to minimize the need to conduct in vivo performance evaluation. Storage stability studies have been conducted to investigate the influence of various environmental factors on microsphere quality throughout the product shelf life. New tests such as the floating test and the in vitro wash-off test have been developed along with advancement in characterization techniques for other physico-chemical parameters such as particle size, drug content, and thermal properties. Although significant developments have been made in microsphere release testing, there is still a lack of guidance in this area. Microsphere storage stability studies should be extended to include microspheres containing large molecules. An agreement needs to be reached on the use of particle sizing techniques to avoid inconsistent data. An approach needs to be developed to determine total moisture content of microspheres.

Application of separate pressure test in oilfield development

NASA Astrophysics Data System (ADS)

Jingjun, Guo

2018-06-01

Based on the analysis of separate pressure testing data of injection wells and the actual situations of oilfield development, this paper discusses several application examples of these testing data in evaluating the effect of reservoir development, optimizating injection wells scheme adjustment, guiding oil and water wells to increase production and injection and preventing casing damage.

Development of a State-Wide Competency Test for Marketing Education. Final Report.

ERIC Educational Resources Information Center

Smith, Clifton L.

A project was conducted to develop a valid, competency-referenced test on the core competencies identified for the Missouri Fundamentals of Marketing curriculum. During the project: (1) multiple-choice test items based on the core competencies in the Fundamentals of Marketing curriculum were developed; (2) instructions for onsite administration of…

Development and Validation of a Computer Adaptive EFL Test

ERIC Educational Resources Information Center

He, Lianzhen; Min, Shangchao

2017-01-01

The first aim of this study was to develop a computer adaptive EFL test (CALT) that assesses test takers' listening and reading proficiency in English with dichotomous items and polytomous testlets. We reported in detail on the development of the CALT, including item banking, determination of suitable item response theory (IRT) models for item…

75 FR 39954 - Oversight of Laboratory Developed Tests; Public Meeting; Change of Meeting Location

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-13

...] Oversight of Laboratory Developed Tests; Public Meeting; Change of Meeting Location AGENCY: Food and Drug... location for the upcoming public meeting entitled ``Oversight of Laboratory Developed Tests.'' A new... the public meeting, FDA is announcing in this notice a new location for the public meeting. II. New...

Commercial versus Internally Developed Standardized Tests: Lessons from a Small Regional School

ERIC Educational Resources Information Center

Hadjicharalambous, Costas

2014-01-01

The author compares the efficacy of commercially available and internally developed standardized tests and evaluates their strengths and weakness in assessing student learning outcomes. The author shares the experience of a regional school in developing a standardized test to assess business knowledge. Data from a sample of 268 students were used…

Testing and evaluation of tactical electro-optical sensors

NASA Astrophysics Data System (ADS)

Middlebrook, Christopher T.; Smith, John G.

2002-07-01

As integrated electro-optical sensor payloads (multi- sensors) comprised of infrared imagers, visible imagers, and lasers advance in performance, the tests and testing methods must also advance in order to fully evaluate them. Future operational requirements will require integrated sensor payloads to perform missions at further ranges and with increased targeting accuracy. In order to meet these requirements sensors will require advanced imaging algorithms, advanced tracking capability, high-powered lasers, and high-resolution imagers. To meet the U.S. Navy's testing requirements of such multi-sensors, the test and evaluation group in the Night Vision and Chemical Biological Warfare Department at NAVSEA Crane is developing automated testing methods, and improved tests to evaluate imaging algorithms, and procuring advanced testing hardware to measure high resolution imagers and line of sight stabilization of targeting systems. This paper addresses: descriptions of the multi-sensor payloads tested, testing methods used and under development, and the different types of testing hardware and specific payload tests that are being developed and used at NAVSEA Crane.

Integrating non-animal test information into an adaptive testing strategy - skin sensitization proof of concept case.

PubMed

Jaworska, Joanna; Harol, Artsiom; Kern, Petra S; Gerberick, G Frank

2011-01-01

There is an urgent need to develop data integration and testing strategy frameworks allowing interpretation of results from animal alternative test batteries. To this end, we developed a Bayesian Network Integrated Testing Strategy (BN ITS) with the goal to estimate skin sensitization hazard as a test case of previously developed concepts (Jaworska et al., 2010). The BN ITS combines in silico, in chemico, and in vitro data related to skin penetration, peptide reactivity, and dendritic cell activation, and guides testing strategy by Value of Information (VoI). The approach offers novel insights into testing strategies: there is no one best testing strategy, but the optimal sequence of tests depends on information at hand, and is chemical-specific. Thus, a single generic set of tests as a replacement strategy is unlikely to be most effective. BN ITS offers the possibility of evaluating the impact of generating additional data on the target information uncertainty reduction before testing is commenced.

Development and Application of a Portable Health Algorithms Test System

NASA Technical Reports Server (NTRS)

Melcher, Kevin J.; Fulton, Christopher E.; Maul, William A.; Sowers, T. Shane

2007-01-01

This paper describes the development and initial demonstration of a Portable Health Algorithms Test (PHALT) System that is being developed by researchers at the NASA Glenn Research Center (GRC). The PHALT System was conceived as a means of evolving the maturity and credibility of algorithms developed to assess the health of aerospace systems. Comprising an integrated hardware-software environment, the PHALT System allows systems health management algorithms to be developed in a graphical programming environment; to be tested and refined using system simulation or test data playback; and finally, to be evaluated in a real-time hardware-in-the-loop mode with a live test article. In this paper, PHALT System development is described through the presentation of a functional architecture, followed by the selection and integration of hardware and software. Also described is an initial real-time hardware-in-the-loop demonstration that used sensor data qualification algorithms to diagnose and isolate simulated sensor failures in a prototype Power Distribution Unit test-bed. Success of the initial demonstration is highlighted by the correct detection of all sensor failures and the absence of any real-time constraint violations.

Integration of optical measurement methods with flight parameter measurement systems

NASA Astrophysics Data System (ADS)

Kopecki, Grzegorz; Rzucidlo, Pawel

2016-05-01

During the AIM (advanced in-flight measurement techniques) and AIM2 projects, innovative modern techniques were developed. The purpose of the AIM project was to develop optical measurement techniques dedicated for flight tests. Such methods give information about aircraft elements deformation, thermal loads or pressure distribution, etc. In AIM2 the development of optical methods for flight testing was continued. In particular, this project aimed at the development of methods that could be easily applied in flight tests in an industrial setting. Another equally important task was to guarantee the synchronization of the classical measuring system with cameras. The PW-6U glider used in flight tests was provided by the Rzeszów University of Technology. The glider had all the equipment necessary for testing the IPCT (image pattern correlation technique) and IRT (infrared thermometry) methods. Additionally, equipment adequate for the measurement of typical flight parameters, registration and analysis has been developed. This article describes the designed system, as well as presenting the system’s application during flight tests. Additionally, the results obtained in flight tests show certain limitations of the IRT method as applied.

Ground test challenges in the development of the Space Shuttle orbiter auxiliary power unit

NASA Technical Reports Server (NTRS)

Chaffee, N. H.; Lance, R. J.; Weary, D. P.

1984-01-01

A conventional aircraft hydraulic system design approach was selected to provide fluid power for the Space Shuttle Orbiter. Developing the power unit, known as the Auxiliary Power Unit (APU), to drive the hydraulic pumps presented a major technological challenge. A small, high speed turbine drive unit powered by catalytically decomposed hydrazine and operating in the pulse mode was selected to meet the requirement. Because of limitations of vendor test facilities, significant portions of the development, flight qualification, and postflight anomaly testing of the Orbiter APU were accomplished at the Johnson Space Center (JSC) test facilities. This paper discusses the unique requirements of attitude, gravity forces, pressure profiles, and thermal environments which had to be satisfied by the APU, and presents the unique test facility and simulation techniques employed to meet the ground test requirements. In particular, the development of the zero-g lubrication system, the development of necessary APU thermal control techniques, the accomplishment of integrated systems tests, and the postflight investigation of the APU lube oil cooler behavior are discussed.

Detection and avoidance of errors in computer software

NASA Technical Reports Server (NTRS)

Kinsler, Les

1989-01-01

The acceptance test errors of a computer software project to determine if the errors could be detected or avoided in earlier phases of development. GROAGSS (Gamma Ray Observatory Attitude Ground Support System) was selected as the software project to be examined. The development of the software followed the standard Flight Dynamics Software Development methods. GROAGSS was developed between August 1985 and April 1989. The project is approximately 250,000 lines of code of which approximately 43,000 lines are reused from previous projects. GROAGSS had a total of 1715 Change Report Forms (CRFs) submitted during the entire development and testing. These changes contained 936 errors. Of these 936 errors, 374 were found during the acceptance testing. These acceptance test errors were first categorized into methods of avoidance including: more clearly written requirements; detail review; code reading; structural unit testing; and functional system integration testing. The errors were later broken down in terms of effort to detect and correct, class of error, and probability that the prescribed detection method would be successful. These determinations were based on Software Engineering Laboratory (SEL) documents and interviews with the project programmers. A summary of the results of the categorizations is presented. The number of programming errors at the beginning of acceptance testing can be significantly reduced. The results of the existing development methodology are examined for ways of improvements. A basis is provided for the definition is a new development/testing paradigm. Monitoring of the new scheme will objectively determine its effectiveness on avoiding and detecting errors.

Development flight tests of the Viking decelerator system.

NASA Technical Reports Server (NTRS)

Murrow, H. N.; Eckstrom, C. V.; Henke, D. W.

1973-01-01

Significant aspects of a low altitude flight test phase of the overall Viking decelerator system development are given. This test series included nine aircraft drop tests that were conducted at the Joint Parachute Test Facility, El Centro, California, between September 1971 and May 1972. The test technique and analytical planning method utilized to best simulate loading conditions in a low density environment are presented and some test results are shown to assess their adequacy. Performance effects relating to suspension line lengths of 1.7 D sub o with different canopy loadings are noted. System hardware developments are described, in particular the utilization of a fabric deployment mortar cover which remained attached to the parachute canopy. Finally, the contribution of this test series to the overall program is assessed.

An Analysis of Minimum System Requirements to Support Computerized Adaptive Testing.

DTIC Science & Technology

1986-09-01

adaptive test ( CAT ); adaptive test ing A;4SRAC:’ (Continue on reverie of necessary and ident4f by block number) % This pape-r discusses the minimum system...requirements needed to develop a computerized adaptive test ( CAT ). It lists some of the benefits of adaptive testing, establishes a set of...discusses the minimum system requirements needed to develop a computerized adaptive test ( CAT ). It lists some of the benefits of adaptive testing

Implementing ICAO Language Proficiency Requirements in the Versant Aviation English Test

ERIC Educational Resources Information Center

Van Moere, Alistair; Suzuki, Masanori; Downey, Ryan; Cheng, Jian

2009-01-01

This paper discusses the development of an assessment to satisfy the International Civil Aviation Organization (ICAO) Language Proficiency Requirements. The Versant Aviation English Test utilizes speech recognition technology and a computerized testing platform, such that test administration and scoring are fully automated. Developed in…

Development of a Valid Volleyball Skills Test Battery.

ERIC Educational Resources Information Center

Bartlett, Jackie; And Others

1991-01-01

Describes the development of the North Carolina State University Volleyball Skills Test Battery which offers accurate measurement of three volleyball skills (serve, forearm pass, and set). When physical educators tested 313 students, the battery objectively measured their abilities, providing a gamelike means of teaching, testing, grouping, and…

Development and Validation of a Translation Test.

ERIC Educational Resources Information Center

Ghonsooly, Behzad

1993-01-01

Translation testing methodology has been criticized for its subjective character. No real strides have so far been made in developing an objective translation test. In this paper, certain detailed procedures including various phases of pretesting have been performed to achieve objectivity and scorability in translation testing methodology. In…

COMPARATIVE TOXICITY TESTING OF SELECTED BENTHIC AND EPIBENTHIC ORGANISMS FOR THE DEVELOPMENT OF SEDIMENT QUALITY TEST PROTOCOLS

EPA Science Inventory

Sediment contamination has resulted in the need to develop an appropriate suite of toxicity tests to assess ecotoxicological impacts on estuarine ecosystems. Existing Environmental Protection Agency (EPA) protocols recommend a number of test organisms, including amphipods, polych...

Overview of CEV Thermal Protection System Seal Development

NASA Technical Reports Server (NTRS)

DeMange, Jeff; Taylor, Shawn; Dunlap, Patrick; Steinetz, Bruce; Delgado, Irebert; Finkbeiner, Josh; Mayer, John

2009-01-01

NASA GRC supporting design, development, and implementation of numerous seal systems for the Orion CEV: a) HS-to-BS interface. b) Compression pad. HS-to-BS Interface Seal System: a) design has evolved as a result of changes with the CEV TPS. b) Seal system is currently under development/evaluation. Coupon level tests, Arc jet tests, and Validation test development. Compression Pad: a) Finalizing design options. b) Evaluating material candidates.

Developing a Non-Language Related Span Test for the Use in Language-Specific and Cross-Language Studies

ERIC Educational Resources Information Center

Shahnazari-Dorcheh, Mohammadtaghi; Roshan, Saeed

2012-01-01

Due to the lack of span test for the use in language-specific and cross-language studies, this study provides L1 and L2 researchers with a reliable language-independent span test (math span test) for the measurement of working memory capacity. It also describes the development, validation, and scoring method of this test. This test included 70…

Southern Impact Testing Alliance (SITA)

NASA Technical Reports Server (NTRS)

Hubbs, Whitney; Roebuck, Brian; Zwiener, Mark; Wells, Brian

2009-01-01

Efforts to form this Alliance began in 2008 to showcase the impact testing capabilities within the southern United States. Impact testing customers can utilize SITA partner capabilities to provide supporting data during all program phases-materials/component/ flight hardware design, development, and qualification. This approach would allow programs to reduce risk by providing low cost testing during early development to flush out possible problems before moving on to larger scale1 higher cost testing. Various SITA partners would participate in impact testing depending on program phase-materials characterization, component/subsystem characterization, full-scale system testing for qualification. SITA partners would collaborate with the customer to develop an integrated test approach during early program phases. Modeling and analysis validation can start with small-scale testing to ensure a level of confidence for the next step large or full-scale conclusive test shots. Impact Testing Facility (ITF) was established and began its research in spacecraft debris shielding in the early 1960's and played a malor role in the International Space Station debris shield development. As a result of return to flight testing after the loss of STS-107 (Columbia) MSFC ITF realized the need to expand their capabilities beyond meteoroid and space debris impact testing. MSFC partnered with the Department of Defense and academic institutions as collaborative efforts to gain and share knowledge that would benefit the Space Agency as well as the DoD. MSFC ITF current capabilities include: Hypervelocity impact testing, ballistic impact testing, and environmental impact testing.

Interfacing and Verifying ALHAT Safe Precision Landing Systems with the Morpheus Vehicle

NASA Technical Reports Server (NTRS)

Carson, John M., III; Hirsh, Robert L.; Roback, Vincent E.; Villalpando, Carlos; Busa, Joseph L.; Pierrottet, Diego F.; Trawny, Nikolas; Martin, Keith E.; Hines, Glenn D.

2015-01-01

The NASA Autonomous precision Landing and Hazard Avoidance Technology (ALHAT) project developed a suite of prototype sensors to enable autonomous and safe precision landing of robotic or crewed vehicles under any terrain lighting conditions. Development of the ALHAT sensor suite was a cross-NASA effort, culminating in integration and testing on-board a variety of terrestrial vehicles toward infusion into future spaceflight applications. Terrestrial tests were conducted on specialized test gantries, moving trucks, helicopter flights, and a flight test onboard the NASA Morpheus free-flying, rocket-propulsive flight-test vehicle. To accomplish these tests, a tedious integration process was developed and followed, which included both command and telemetry interfacing, as well as sensor alignment and calibration verification to ensure valid test data to analyze ALHAT and Guidance, Navigation and Control (GNC) performance. This was especially true for the flight test campaign of ALHAT onboard Morpheus. For interfacing of ALHAT sensors to the Morpheus flight system, an adaptable command and telemetry architecture was developed to allow for the evolution of per-sensor Interface Control Design/Documents (ICDs). Additionally, individual-sensor and on-vehicle verification testing was developed to ensure functional operation of the ALHAT sensors onboard the vehicle, as well as precision-measurement validity for each ALHAT sensor when integrated within the Morpheus GNC system. This paper provides some insight into the interface development and the integrated-systems verification that were a part of the build-up toward success of the ALHAT and Morpheus flight test campaigns in 2014. These campaigns provided valuable performance data that is refining the path toward spaceflight infusion of the ALHAT sensor suite.

Developing product quality standards for wheelchairs used in less-resourced environments

PubMed Central

McCambridge, Matt; Reese, Norman; Schoendorfer, Don; Wunderlich, Eric; Rushman, Chris; Mahilo, Dave

2017-01-01

Background Premature failures of wheelchairs in less-resourced environments (LREs) may be because of shortcomings in product regulation and quality standards. The standards published by the International Organization for Standardization (ISO) specify wheelchair tests for durability, safety and performance, but their applicability to products used in the rugged conditions of LREs is unclear. Because of this, wheelchair-related guidelines published by the World Health Organization recommended developing more rigorous durability tests for wheelchairs. Objectives This study was performed to identify the additional tests needed for LREs. Methods First, a literature review of the development of ISO test standards, wheelchair standards testing studies and wheelchair evaluations in LREs was performed. Second, expert advice from members of the Standards Working Group of the International Society of Wheelchair Professionals (ISWP) was compiled and reviewed. Results A total of 35 articles were included in the literature review. Participation from LREs was not observed in the ISO standards development. As per wheelchair testing study evidence, wheelchair models delivered in LREs did not meet the minimum standards requirement. Multiple part failures and repairs were observed with reviewed field evaluation studies. ISWP experts noted that several testing factors responsible for premature failures with wheelchair parts are not included in the standards and accordingly provided advice for additional test development. Conclusion The study findings indicate the need to develop a wide range of tests, with specific tests for measuring corrosion resistance of the entire wheelchair, rolling resistance of castors and rear wheels, and durability of whole wheelchair and castor assemblies. PMID:28936410

Voyager Development Test Model

NASA Image and Video Library

2017-07-05

This archival photo shows the encapsulation of the Voyager Development Test Model at NASA's Kennedy Space Center's Eastern Test Range. The picture was taken on October 8, 1976. https://photojournal.jpl.nasa.gov/catalog/PIA21730

TPS In-Flight Health Monitoring Project Progress Report

NASA Technical Reports Server (NTRS)

Kostyk, Chris; Richards, Lance; Hudston, Larry; Prosser, William

2007-01-01

Progress in the development of new thermal protection systems (TPS) is reported. New approaches use embedded lightweight, sensitive, fiber optic strain and temperature sensors within the TPS. Goals of the program are to develop and demonstrate a prototype TPS health monitoring system, develop a thermal-based damage detection algorithm, characterize limits of sensor/system performance, and develop ea methodology transferable to new designs of TPS health monitoring systems. Tasks completed during the project helped establish confidence in understanding of both test setup and the model and validated system/sensor performance in a simple TPS structure. Other progress included complete initial system testing, commencement of the algorithm development effort, generation of a damaged thermal response characteristics database, initial development of a test plan for integration testing of proven FBG sensors in simple TPS structure, and development of partnerships to apply the technology.

pFUnit 3.0 Tutorial Advanced

NASA Technical Reports Server (NTRS)

Clune, Tom

2014-01-01

This tutorial will introduce Fortran developers to unit-testing and test-driven development (TDD) using pFUnit. As with other unit-testing frameworks, pFUnit, simplifies the process of writing, collecting, and executing tests while providing clear diagnostic messages for failing tests. pFUnit specifically targets the development of scientific-technical software written in Fortran and includes customized features such as: assertions for multi-dimensional arrays, distributed (MPI) and thread-based (OpenMP) parallellism, and flexible parameterized tests.These sessions will include numerous examples and hands-on exercises that gradually build in complexity. Attendees are expected to have working knowledge of F90, but familiarity with object-oriented syntax in F2003 and MPI will be of benefit for the more advanced examples. By the end of the tutorial the audience should feel comfortable in applying pFUnit within their own development environment.

Selection of a discriminant and biorelevant in vitro dissolution test for the development of fenofibrate self-emulsifying lipid-based formulations.

PubMed

Pestieau, Aude; Krier, Fabrice; Brouwers, Adeline; Streel, Bruno; Evrard, Brigitte

2016-09-20

Fenofibrate, a BCS class II compound, has a low bioavailability especially when taken orally on an empty stomach. The challenge to find a new formulation for providing bioavailability, independent of food, is still ongoing. If the development of a suitable oral delivery formulation of BCS class II compounds is a frequent and great challenge to formulation scientists, the in vitro evaluation of these new formulations is also a great challenge. The purpose of this study was therefore to select an in vitro dissolution test that would be useful and as biorelevant as possible for the development of fenofibrate self-emulsifying lipid-based formulations. In this context, three different fenofibrate formulations, for which in vivo data are available in the literature, were tested using different dissolution tests until we found the one that was the most suitable. As part of this approach, we started with the simplest in vitro dissolution tests and progressed to tests that were increasingly more complex. The first tests were different single phase dissolution tests: a test under sink conditions based on the USP monograph, and different tests under non-sink conditions in non-biorelevant and biorelevant media. Given the inconclusive results obtained with these tests, biphasic dissolution systems were then tested: one with USP apparatus type II alone and another which combined USP apparatus types II and IV. This last combined test seemed the most suitable in vitro dissolution test for the development of the future fenofibrate lipid-based formulations we intend to develop in our own laboratory. Copyright © 2016 Elsevier B.V. All rights reserved.

Logistical Consideration in Computer-Based Screening of Astronaut Applicants

NASA Technical Reports Server (NTRS)

Galarza, Laura

2000-01-01

This presentation reviews the logistical, ergonomic, and psychometric issues and data related to the development and operational use of a computer-based system for the psychological screening of astronaut applicants. The Behavioral Health and Performance Group (BHPG) at the Johnson Space Center upgraded its astronaut psychological screening and selection procedures for the 1999 astronaut applicants and subsequent astronaut selection cycles. The questionnaires, tests, and inventories were upgraded from a paper-and-pencil system to a computer-based system. Members of the BHPG and a computer programmer designed and developed needed interfaces (screens, buttons, etc.) and programs for the astronaut psychological assessment system. This intranet-based system included the user-friendly computer-based administration of tests, test scoring, generation of reports, the integration of test administration and test output to a single system, and a complete database for past, present, and future selection data. Upon completion of the system development phase, four beta and usability tests were conducted with the newly developed system. The first three tests included 1 to 3 participants each. The final system test was conducted with 23 participants tested simultaneously. Usability and ergonomic data were collected from the system (beta) test participants and from 1999 astronaut applicants who volunteered the information in exchange for anonymity. Beta and usability test data were analyzed to examine operational, ergonomic, programming, test administration and scoring issues related to computer-based testing. Results showed a preference for computer-based testing over paper-and -pencil procedures. The data also reflected specific ergonomic, usability, psychometric, and logistical concerns that should be taken into account in future selection cycles. Conclusion. Psychological, psychometric, human and logistical factors must be examined and considered carefully when developing and using a computer-based system for psychological screening and selection.

Physical employment standards for U.K. fire and rescue service personnel.

PubMed

Blacker, S D; Rayson, M P; Wilkinson, D M; Carter, J M; Nevill, A M; Richmond, V L

2016-01-01

Evidence-based physical employment standards are vital for recruiting, training and maintaining the operational effectiveness of personnel in physically demanding occupations. (i) Develop criterion tests for in-service physical assessment, which simulate the role-related physical demands of UK fire and rescue service (UK FRS) personnel. (ii) Develop practical physical selection tests for FRS applicants. (iii) Evaluate the validity of the selection tests to predict criterion test performance. Stage 1: we conducted a physical demands analysis involving seven workshops and an expert panel to document the key physical tasks required of UK FRS personnel and to develop 'criterion' and 'selection' tests. Stage 2: we measured the performance of 137 trainee and 50 trained UK FRS personnel on selection, criterion and 'field' measures of aerobic power, strength and body size. Statistical models were developed to predict criterion test performance. Stage 3: matter experts derived minimum performance standards. We developed single person simulations of the key physical tasks required of UK FRS personnel as criterion and selection tests (rural fire, domestic fire, ladder lift, ladder extension, ladder climb, pump assembly, enclosed space search). Selection tests were marginally stronger predictors of criterion test performance (r = 0.88-0.94, 95% Limits of Agreement [LoA] 7.6-14.0%) than field test scores (r = 0.84-0.94, 95% LoA 8.0-19.8%) and offered greater face and content validity and more practical implementation. This study outlines the development of role-related, gender-free physical employment tests for the UK FRS, which conform to equal opportunities law. © The Author 2015. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Development history of the Hybrid Test Vehicle

NASA Technical Reports Server (NTRS)

Trummel, M. C.; Burke, A. F.

1983-01-01

Phase I of a joint Department of Energy/Jet Propulsion Laboratory Program undertook the development of the Hybrid Test Vehicle (HTV), which has subsequently progressed through design, fabrication, and testing and evaluation phases. Attention is presently given to the design and test experience gained during the HTV development program, and a discussion is presented of the design features and performance capabilities of the various 'mule' vehicles, devoted to the separate development of engine microprocessor control, vehicle structure, and mechanical components, whose elements were incorporated into the final HTV design. Computer projections of the HTV's performance are given.

Office of the Secretary of Defense Research, Development Test and Evaluation, Development and Test Evaluation, Defense, Director of Operational Test and Evaluation Defense, FY 1994 Budget Estimates, Justification of Estimates Submitted to Congress April 1993

DTIC Science & Technology

1993-04-01

separation capability. o Demonstrate advanced KKVs in the 6-20 KG weight class. o Test planning for SRAM/LEAP and PATRIOT/LEAP integrated technology...packaging techniques to reduce satellite size, weight , power, and total system costs. Further development of these technologies are absolutely 4...1993 o Developed a master plan with a delivery schedule for each light- weight subassembly in the sensor integration payload. o Finalized a contract for

Thermal Protection System Aerothermal Screening Tests in HYMETS Facility

NASA Technical Reports Server (NTRS)

Szalai, Christine E.; Beck, Robin A. S.; Gasch, Matthew J.; Alumni, Antonella I.; Chavez-Garcia, Jose F.; Splinter, Scott C.; Gragg, Jeffrey G.; Brewer, Amy

2011-01-01

The Entry, Descent, and Landing (EDL) Technology Development Project has been tasked to develop Thermal Protection System (TPS) materials for insertion into future Mars Entry Systems. A screening arc jet test of seven rigid ablative TPS material candidates was performed in the Hypersonic Materials Environmental Test System (HYMETS) facility at NASA Langley Research Center, in both an air and carbon dioxide test environment. Recession, mass loss, surface temperature, and backface thermal response were measured for each test specimen. All material candidates survived the Mars aerocapture relevant heating condition, and some materials showed a clear increase in recession rate in the carbon dioxide test environment. These test results supported subsequent down-selection of the most promising material candidates for further development.

Test Rack Development for Extended Operation of Advanced Stirling Convertors at NASA Glenn Research Center

NASA Technical Reports Server (NTRS)

Dugala, Gina M.

2010-01-01

The U.S. Department of Energy, Lockheed Martin Space Systems Company, Sunpower Inc., and NASA Glenn Research Center (GRC) have been developing an Advanced Stirling Radioisotope Generator (ASRG) for use as a power system on space science missions. This generator will make use of free-piston Stirling convertors to achieve higher conversion efficiency than with currently available alternatives. One part of NASA GRC's support of ASRG development includes extended operation testing of Advanced Stirling Convertors (ASCs) developed by Sunpower Inc. and GRC. The ASC consists of a free-piston Stirling engine integrated with a linear alternator. NASA GRC has been building test facilities to support extended operation of the ASCs for several years. Operation of the convertors in the test facility provides convertor performance data over an extended period of time. One part of the test facility is the test rack, which provides a means for data collection, convertor control, and safe operation. Over the years, the test rack requirements have changed. The initial ASC test rack utilized an alternating-current (AC) bus for convertor control; the ASRG Engineering Unit (EU) test rack can operate with AC bus control or with an ASC Control Unit (ACU). A new test rack is being developed to support extended operation of the ASC-E2s with higher standards of documentation, component selection, and assembly practices. This paper discusses the differences among the ASC, ASRG EU, and ASC-E2 test racks.

Affordable Development and Qualification Strategy for Nuclear Thermal Propulsion

NASA Technical Reports Server (NTRS)

Gerrish, Harold P., Jr.; Doughty, Glen E.; Bhattacharyya, Samit K.

2013-01-01

Nuclear Thermal Propulsion (NTP) is a concept which uses a nuclear reactor to heat a propellant to high temperatures without combustion and can achieve significantly greater specific impulse than chemical engines. NTP has been considered many times for human and cargo missions beyond low earth orbit. A lot of development and technical maturation of NTP components took place during the Rover/NERVA program of the 60's and early 70's. Other NTP programs and studies followed attempting to further mature the NTP concept and identify a champion customer willing to devote the funds and support the development schedule to a demonstration mission. Budgetary constraints require the use of an affordable development and qualification strategy that takes into account all the previous work performed on NTP to construct an existing database, and include lessons learned and past guidelines followed. Current guidelines and standards NASA uses for human rating chemical rocket engines is referenced. The long lead items for NTP development involve the fuel elements of the reactor and ground testing the engine system, subsystem, and components. Other considerations which greatly impact the development plans includes the National Space Policy, National Environmental Policy Act, Presidential Directive/National Security Council Memorandum #25 (Scientific or Technological Experiments with Possible Large-Scale Adverse Environmental Effects and Launch of Nuclear Systems into Space), and Safeguards and Security. Ground testing will utilize non-nuclear test capabilities to help down select components and subsystems before testing in a nuclear environment to save time and cost. Existing test facilities with minor modifications will be considered to the maximum extent practical. New facilities will be designed to meet minimum requirements. Engine and test facility requirements are based on the driving mission requirements with added factors of safety for better assurance and reliability. Emphasis will be placed on small engines, since the smaller the NTP engine, the easier it is to transport, assemble/disassemble, and filter the exhaust during tests. A new ground test concept using underground bore holes (modeled after the underground nuclear test program) to filter the NTP engine exhaust is being considered. The NTP engine system design, development, test, and evaluation plan includes many engine components and subsystems, which are very similar to those used in chemical engines, and can be developed in conjunction with them Other less mature NTP engine components and subsystems (e.g., reactor) will be thoroughly analyzed and tested to acceptable levels recommended by the referenced standards and guidelines. The affordable development strategy also considers a prototype flight test, as a final step in the development process. Preliminary development schedule estimates show that an aggressive development schedule (without much margin) will be required to be flight ready for a 2033 human mission to Mars.

An Instrument to Assess Beliefs about Standardized Testing: Measuring the Influence of Epistemology on the Endorsement of Standardized Testing

ERIC Educational Resources Information Center

Magee, Robert G.; Jones, Brett D.

2012-01-01

This article describes the development of an instrument to assess beliefs about standardized testing in schools, a topic of much heated debate. The Beliefs About Standardized Testing scale was developed to measure the extent to which individuals support high-stakes standardized testing. The 9-item scale comprises three subscales which measure…

Comparison of Development Test and Evaluation and Overall Program Estimate at Completion

DTIC Science & Technology

2011-03-01

of the overall model and parameter. In addition to 36 the Shapiro-Wilkes test , and Cook’s Distance overlay plot we used the Breusch - Pagan test to...Transformed Model Finally, we evaluated our log transformed model using the Breusch - Pagan test . The results return a value of .51, thus confirming our...COMPARISON OF DEVELOPMENT TEST AND EVALUATION AND OVERALL

Development of a Contact Permeation Test Fixture and Method

DTIC Science & Technology

2013-04-01

direct contact with the skin, indicates the need for a quantitative contact test method. Comparison tests were conducted with VX on a standardized...Guide for the Care and Use of Laboratory Animals (8th ed.; National Research Council: Washington, DC, 2011). This test was also performed in...1 1.2 Development of a Contact-Based Permeation Test Method ........................................ 1 2. EXPERIMENTAL PROCEDURES

Diagnosis of Helicobacter pylori infection: Current options and developments

PubMed Central

Wang, Yao-Kuang; Kuo, Fu-Chen; Liu, Chung-Jung; Wu, Meng-Chieh; Shih, Hsiang-Yao; Wang, Sophie SW; Wu, Jeng-Yih; Kuo, Chao-Hung; Huang, Yao-Kang; Wu, Deng-Chyang

2015-01-01

Accurate diagnosis of Helicobacter pylori (H. pylori) infection is a crucial part in the effective management of many gastroduodenal diseases. Several invasive and non-invasive diagnostic tests are available for the detection of H. pylori and each test has its usefulness and limitations in different clinical situations. Although none can be considered as a single gold standard in clinical practice, several techniques have been developed to give the more reliable results. Invasive tests are performed via endoscopic biopsy specimens and these tests include histology, culture, rapid urease test as well as molecular methods. Developments of endoscopic equipment also contribute to the real-time diagnosis of H. pylori during endoscopy. Urea breathing test and stool antigen test are most widely used non-invasive tests, whereas serology is useful in screening and epidemiological studies. Molecular methods have been used in variable specimens other than gastric mucosa. More than detection of H. pylori infection, several tests are introduced into the evaluation of virulence factors and antibiotic sensitivity of H. pylori, as well as screening precancerous lesions and gastric cancer. The aim of this article is to review the current options and novel developments of diagnostic tests and their applications in different clinical conditions or for specific purposes. PMID:26523098

Accelerated stress testing of thin film solar cells: Development of test methods and preliminary results

NASA Technical Reports Server (NTRS)

Lathrop, J. W.

1985-01-01

If thin film cells are to be considered a viable option for terrestrial power generation their reliability attributes will need to be explored and confidence in their stability obtained through accelerated testing. Development of a thin film accelerated test program will be more difficult than was the case for crystalline cells because of the monolithic construction nature of the cells. Specially constructed test samples will need to be fabricated, requiring committment to the concept of accelerated testing by the manufacturers. A new test schedule appropriate to thin film cells will need to be developed which will be different from that used in connection with crystalline cells. Preliminary work has been started to seek thin film schedule variations to two of the simplest tests: unbiased temperature and unbiased temperature humidity. Still to be examined are tests which involve the passage of current during temperature and/or humidity stress, either by biasing in the forward (or reverse) directions or by the application of light during stress. Investigation of these current (voltage) accelerated tests will involve development of methods of reliably contacting the thin conductive films during stress.

Developing a Pragmatics Test for Chinese EFL Learners

ERIC Educational Resources Information Center

Liu, Jianda

2007-01-01

Pragmatic proficiency has been incorporated in the EFL teaching and testing syllabi in China, but the corresponding tests still focus on linguistic competence. The gap between the teaching and testing is mainly due to the lack of generally accepted measures of communicative abilities such as pragmatic competence. This study developed a…

78 FR 12259 - Unmanned Aircraft System Test Site Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-22

...-0061] Unmanned Aircraft System Test Site Program AGENCY: Federal Aviation Administration (FAA), DOT... Defense, develop a test site program for the integration of unmanned aircraft systems in to the National Airspace System. The overall purpose of this test site program is to develop a body of data and operational...

Development of laboratory test methods to replace the simulated high-temperature grout fluidity test.

DOT National Transportation Integrated Search

2014-06-01

This report contains a summary of the research performed to develop a replacement for the high-temperature grout : fluidity (HTGF) test. The HTGF test was employed in the past by FDOT to qualify post-tensioning (PT) grouts for use in : post-tensioned...

Current Developments in Language Testing. Anthology Series 25.

ERIC Educational Resources Information Center

Anivan, Sarinee, Ed.

The selection of papers on language testing includes: "Language Testing in the 1990s: How Far Have We Come? How Much Further Have We To Go?" (J. Charles Alderson); "Current Research/Development in Language Testing" (John W. Oller, Jr.); "The Difficulties of Difficulty: Prompts in Writing Assessment" (Liz Hamp-Lyons,…

APA's Guidelines for Test User Qualifications: An Executive Summary.

ERIC Educational Resources Information Center

Turner, Samuel M.; DeMers, Stephen T.; Fox, Heather Roberts; Reed, Geoffrey M.

2001-01-01

Describes the American Psychological Association's (APA's) development of the Task Force on Test User Qualifications, explaining the APA's purpose in developing guidelines for the use of psychological tests. Highlights the historical background, the scope of the guidelines, generic knowledge and skills considered important for good test use, and…

Handbook for Driving Knowledge Testing.

ERIC Educational Resources Information Center

Pollock, William T.; McDole, Thomas L.

Materials intended for driving knowledge test development for use by operational licensing and education agencies are presented. A pool of 1,313 multiple choice test items is included, consisting of sets of specially developed and tested items covering principles of safe driving, legal regulations, and traffic control device knowledge pertinent to…

Modeling Student Software Testing Processes: Attitudes, Behaviors, Interventions, and Their Effects

ERIC Educational Resources Information Center

Buffardi, Kevin John

2014-01-01

Effective software testing identifies potential bugs and helps correct them, producing more reliable and maintainable software. As software development processes have evolved, incremental testing techniques have grown in popularity, particularly with introduction of test-driven development (TDD). However, many programmers struggle to adopt TDD's…

Culturally Sensitive Career Assessment: A Quandary. ERIC Digest No. 210.

ERIC Educational Resources Information Center

Austin, James T.

Multicultural perspectives on assessment challenge traditional perspectives by advancing an additional source of variation in test responses that is presumed to escape test developers and test users. Increasing and convergent evidence from multiple sources indicates the following types of ethnocentric errors in test development, administration,…

The Computerized Adaptive Testing System Development Project.

ERIC Educational Resources Information Center

McBride, James R.; Sympson, J. B.

The Computerized Adaptive Testing (CAT) project is a joint Armed Services coordinated effort to develop and evaluate a system for automated, adaptive administration of the Armed Services Vocational Aptitude Battery (ASVAB). The CAT is a system for administering personnel tests that differs from conventional test administration in two major…

24 CFR 3280.209 - Fire testing.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 24 Housing and Urban Development 5 2014-04-01 2014-04-01 false Fire testing. 3280.209 Section 3280... DEVELOPMENT MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS Fire Safety § 3280.209 Fire testing. Link to an amendment published at 78 FR 73982, Dec. 9, 2013. All fire testing conducted in accordance with...

Recommendations for Developing Alternative Test Methods for Screening and Prioritization of Chemicals for Developmental Neurotoxicity

EPA Science Inventory

Developmental neurotoxicity testing (DNT) is perceived by many stakeholders to be an area in critical need of alternative methods to current animal testing protocols and gUidelines. An immediate goal is to develop test methods that are capable of screening large numbers of chemic...

Development of a Large Scale, High Speed Wheel Test Facility

NASA Technical Reports Server (NTRS)

Kondoleon, Anthony; Seltzer, Donald; Thornton, Richard; Thompson, Marc

1996-01-01

Draper Laboratory, with its internal research and development budget, has for the past two years been funding a joint effort with the Massachusetts Institute of Technology (MIT) for the development of a large scale, high speed wheel test facility. This facility was developed to perform experiments and carry out evaluations on levitation and propulsion designs for MagLev systems currently under consideration. The facility was developed to rotate a large (2 meter) wheel which could operate with peripheral speeds of greater than 100 meters/second. The rim of the wheel was constructed of a non-magnetic, non-conductive composite material to avoid the generation of errors from spurious forces. A sensor package containing a multi-axis force and torque sensor mounted to the base of the station, provides a signal of the lift and drag forces on the package being tested. Position tables mounted on the station allow for the introduction of errors in real time. A computer controlled data acquisition system was developed around a Macintosh IIfx to record the test data and control the speed of the wheel. This paper describes the development of this test facility. A detailed description of the major components is presented. Recently completed tests carried out on a novel Electrodynamic (EDS) suspension system, developed by MIT as part of this joint effort are described and presented. Adaptation of this facility for linear motor and other propulsion and levitation testing is described.

Literature Review: Validity and Potential Usefulness of Psychomotor Ability Tests for Personnel Selection and Classification

DTIC Science & Technology

1988-04-01

cognitive-purmpttidl JDTTTty tests. Taken together, these /ffndings suggest a need for further psychomotor test development and validation research...Leaetta N. Hough (ed.). The findings presented in these documents were used in the development of a battery of new tests and Inventories for use In...Project A. The focus of that development effort was to Identify abilities and other human attri- butes that seemed "best bets" for predicting

Advanced Turbine Technology Applications Project (ATTAP)

NASA Technical Reports Server (NTRS)

1991-01-01

ATTAP activities were highlighted by test bed engine design and development activities; ceramic component design; materials and engine component characterization; ceramic component process development and fabrication; component rig testing; and test bed engine fabrication and testing. Specifically, ATTAP aims to develop and demonstrate the technology of structural ceramics that have the potential for competitive automotive engine life cycle cost and for operating for 3500 hours in a turbine engine environment at temperatures up to 1371 C (2500 F).

The development of the learning video for the flipped classroom model on student of open university on human skeletal system and muscles

NASA Astrophysics Data System (ADS)

Andrini, V. S.

2018-05-01

The objectives of the research are to develop the learning video for the flipped classroom model for Open University’s student and to know the effectiveness of the video. The development of the video used Research and Development ADDIE design (Analyses, Design, Development, Implementation, Evaluation). The sampling used purposive sampling was 28 students in Open University of Nganjuk. The techniques of data collection were the observation data to know the problems of the students, and learning facilities, the test (pre-test and post-test) to know a knowledge aspect, a questionnaire to know advisability of video learning, a structured interview to confirm their answer. The result of the expert of matter and media showed that the average product score was 3.75 of 4 or very good, the small-scale test showed that the average score was 3.60 of 4 and the large-scale test showed that the average score was 3.80 of 4, it had a very good category. The t-test with paired sample test showed that sig. (2-tailed) < 0.05. The N-gain score of pre and post test was 0.55, it had the medium category. It can be concluded that the development of the learning video for flipped classroom was effective to be implemented.

Towards Test Driven Development for Computational Science with pFUnit

NASA Technical Reports Server (NTRS)

Rilee, Michael L.; Clune, Thomas L.

2014-01-01

Developers working in Computational Science & Engineering (CSE)/High Performance Computing (HPC) must contend with constant change due to advances in computing technology and science. Test Driven Development (TDD) is a methodology that mitigates software development risks due to change at the cost of adding comprehensive and continuous testing to the development process. Testing frameworks tailored for CSE/HPC, like pFUnit, can lower the barriers to such testing, yet CSE software faces unique constraints foreign to the broader software engineering community. Effective testing of numerical software requires a comprehensive suite of oracles, i.e., use cases with known answers, as well as robust estimates for the unavoidable numerical errors associated with implementation with finite-precision arithmetic. At first glance these concerns often seem exceedingly challenging or even insurmountable for real-world scientific applications. However, we argue that this common perception is incorrect and driven by (1) a conflation between model validation and software verification and (2) the general tendency in the scientific community to develop relatively coarse-grained, large procedures that compound numerous algorithmic steps.We believe TDD can be applied routinely to numerical software if developers pursue fine-grained implementations that permit testing, neatly side-stepping concerns about needing nontrivial oracles as well as the accumulation of errors. We present an example of a successful, complex legacy CSE/HPC code whose development process shares some aspects with TDD, which we contrast with current and potential capabilities. A mix of our proposed methodology and framework support should enable everyday use of TDD by CSE-expert developers.

Impact Testing of Aluminum 2024 and Titanium 6Al-4V for Material Model Development

NASA Technical Reports Server (NTRS)

Pereira, J. Michael; Revilock, Duane M.; Lerch, Bradley A.; Ruggeri, Charles R.

2013-01-01

One of the difficulties with developing and verifying accurate impact models is that parameters such as high strain rate material properties, failure modes, static properties, and impact test measurements are often obtained from a variety of different sources using different materials, with little control over consistency among the different sources. In addition there is often a lack of quantitative measurements in impact tests to which the models can be compared. To alleviate some of these problems, a project is underway to develop a consistent set of material property, impact test data and failure analysis for a variety of aircraft materials that can be used to develop improved impact failure and deformation models. This project is jointly funded by the NASA Glenn Research Center and the FAA William J. Hughes Technical Center. Unique features of this set of data are that all material property data and impact test data are obtained using identical material, the test methods and procedures are extensively documented and all of the raw data is available. Four parallel efforts are currently underway: Measurement of material deformation and failure response over a wide range of strain rates and temperatures and failure analysis of material property specimens and impact test articles conducted by The Ohio State University; development of improved numerical modeling techniques for deformation and failure conducted by The George Washington University; impact testing of flat panels and substructures conducted by NASA Glenn Research Center. This report describes impact testing which has been done on aluminum (Al) 2024 and titanium (Ti) 6Al-4vanadium (V) sheet and plate samples of different thicknesses and with different types of projectiles, one a regular cylinder and one with a more complex geometry incorporating features representative of a jet engine fan blade. Data from this testing will be used in validating material models developed under this program. The material tests and the material models developed in this program will be published in separate reports.

Assessing clinical reasoning in optometry using the script concordance test.

PubMed

Faucher, Caroline; Dufour-Guindon, Marie-Pier; Lapointe, Gabrielle; Gagnon, Robert; Charlin, Bernard

2016-05-01

Clinical reasoning is central to any health profession but its development among learners is difficult to assess. Over the last few decades, the script concordance test (SCT) has been developed to solve this dilemma and has been used in many health professions; however, no study has been published on the use of the script concordance test in optometry. The purpose of this study was to develop and validate a script concordance test for the field of optometry. A 101-question script concordance test (27 short clinical scenarios) was developed and administered online to a convenience sample of 23 second-year and 19 fourth-year students of optometry. It was also administered to a reference panel of 12 experienced optometrists to develop the scoring key. An item-total correlation was calculated for each question. Cronbach's alpha coefficient was used to evaluate the script concordance test reliability and a t-test compared the two groups. A final 77-question script concordance test was created by eliminating questions with low item-total correlation. Cronbach's alpha for this optimised 77-question script concordance test was 0.80. A group comparison revealed that the second-year students' scores (n = 23; mean score = 66.4 ± 7.87 per cent) were statistically lower (t = -4.141; p < 0.001) than those of the fourth-year students (n = 19; mean score = 75.5 ± 5.97 per cent). The online script concordance test developed for this study was found to be both reliable and capable of discriminating between second- and fourth-year optometric students. These results demonstrate that the script concordance test may be considered as a new tool in the optometric educators' assessment arsenal. Further studies will be needed to cover additional levels of professional development. © 2016 The Authors. Clinical and Experimental Optometry © 2016 Optometry Australia.

Hypersonic propulsion flight tests as essential to air-breathing aerospace plane development

NASA Astrophysics Data System (ADS)

Mehta, U.

Hypersonic air-breathing propulsion utilizing scramjets can fundamentally change transatmospheric acclerators for transportation from low Earth orbits (LEOs). The value and limitations of ground tests, of flight tests, and of computations are presented, and scramjet development requirements are discussed. Near-full-scale hypersonic propulsion flight tests are essential for developing a prototype hypersonic propulsion system and for developing computation-design technology that can be used in designing that system. In order to determine how these objectives should be achieved, some lessons learned from past programs are presented. A conceptual two-stage-to-orbit (TSTO) prototype/experimental aerospace plane is recommended as a means of providing access-to-space and for conducting flight tests. A road map for achieving these objectives is also presented.

Development of a special-purpose test surface guided by uncertainty analysis - Introduction of a new uncertainty analysis step

NASA Technical Reports Server (NTRS)

Wang, T.; Simon, T. W.

1988-01-01

Development of a recent experimental program to investigate the effects of streamwise curvature on boundary layer transition required making a bendable, heated and instrumented test wall, a rather nonconventional surface. The present paper describes this surface, the design choices made in its development and how uncertainty analysis was used, beginning early in the test program, to make such design choices. Published uncertainty analysis techniques were found to be of great value; but, it became clear that another step, one herein called the pre-test analysis, would aid the program development. Finally, it is shown how the uncertainty analysis was used to determine whether the test surface was qualified for service.

Realistic Development and Testing of Fission System at a Non-Nuclear Testing Facility

NASA Technical Reports Server (NTRS)

Godfroy, Tom; VanDyke, Melissa; Dickens, Ricky; Pedersen, Kevin; Lenard, Roger; Houts, Mike

2000-01-01

The use of resistance heaters to simulate heat from fission allows extensive development of fission systems to be performed in non-nuclear test facilities, saving time and money. Resistance heated tests on a module has been performed at the Marshall Space Flight Center in the Propellant Energy Source Testbed (PEST). This paper discusses the experimental facilities and equipment used for performing resistance heated tests. Recommendations are made for improving non-nuclear test facilities and equipment for simulated testing of nuclear systems.

Realistic development and testing of fission systems at a non-nuclear testing facility

NASA Astrophysics Data System (ADS)

Godfroy, Tom; van Dyke, Melissa; Dickens, Ricky; Pedersen, Kevin; Lenard, Roger; Houts, Mike

2000-01-01

The use of resistance heaters to simulate heat from fission allows extensive development of fission systems to be performed in non-nuclear test facilities, saving time and money. Resistance heated tests on a module has been performed at the Marshall Space Flight Center in the Propellant Energy Source Testbed (PEST). This paper discusses the experimental facilities and equipment used for performing resistance heated tests. Recommendations are made for improving non-nuclear test facilities and equipment for simulated testing of nuclear systems. .

Hyper-X Engine Design and Ground Test Program

NASA Technical Reports Server (NTRS)

Voland, R. T.; Rock, K. E.; Huebner, L. D.; Witte, D. W.; Fischer, K. E.; McClinton, C. R.

1998-01-01

The Hyper-X Program, NASA's focused hypersonic technology program jointly run by NASA Langley and Dryden, is designed to move hypersonic, air-breathing vehicle technology from the laboratory environment to the flight environment, the last stage preceding prototype development. The Hyper-X research vehicle will provide the first ever opportunity to obtain data on an airframe integrated supersonic combustion ramjet propulsion system in flight, providing the first flight validation of wind tunnel, numerical and analytical methods used for design of these vehicles. A substantial portion of the integrated vehicle/engine flowpath development, engine systems verification and validation and flight test risk reduction efforts are experimentally based, including vehicle aeropropulsive force and moment database generation for flight control law development, and integrated vehicle/engine performance validation. The Mach 7 engine flowpath development tests have been completed, and effort is now shifting to engine controls, systems and performance verification and validation tests, as well as, additional flight test risk reduction tests. The engine wind tunnel tests required for these efforts range from tests of partial width engines in both small and large scramjet test facilities, to tests of the full flight engine on a vehicle simulator and tests of a complete flight vehicle in the Langley 8-Ft. High Temperature Tunnel. These tests will begin in the summer of 1998 and continue through 1999. The first flight test is planned for early 2000.

Development of Modal Test Techniques for Validation of a Solar Sail Design

NASA Technical Reports Server (NTRS)

Gaspar, James L.; Mann, Troy; Behun, Vaughn; Wilkie, W. Keats; Pappa, Richard

2004-01-01

This paper focuses on the development of modal test techniques for validation of a solar sail gossamer space structure design. The major focus is on validating and comparing the capabilities of various excitation techniques for modal testing solar sail components. One triangular shaped quadrant of a solar sail membrane was tested in a 1 Torr vacuum environment using various excitation techniques including, magnetic excitation, and surface-bonded piezoelectric patch actuators. Results from modal tests performed on the sail using piezoelectric patches at different positions are discussed. The excitation methods were evaluated for their applicability to in-vacuum ground testing and to the development of on orbit flight test techniques. The solar sail membrane was tested in the horizontal configuration at various tension levels to assess the variation in frequency with tension in a vacuum environment. A segment of a solar sail mast prototype was also tested in ambient atmospheric conditions using various excitation techniques, and these methods are also assessed for their ground test capabilities and on-orbit flight testing.

Special tests and destructive physical analyses as used by the Aerospace Corporation with nickel-hydrogen cells

NASA Technical Reports Server (NTRS)

Zimmerman, A. H.; Quinzio, M. V.; Thaller, L. H.

1992-01-01

The destructive physical analysis (DPA) of electrochemical devices is an important part of the overall test. Specific tests were developed to investigate the degradation mode or the failure mechanism that surfaces during the course of a cell being assembled, acceptance tested, and life-cycle tested. The tests that have been developed are peculiar to the cell chemistry under investigation. Tests are often developed by an individual or group of researchers as a result of their particular interest in an unresolved failure mechanism or degradation mode. A series of production, operational, and storage issues that were addressed by the Electrochemistry Group at The Aerospace Corporation are addressed. As a result of these investigations, as well as associated research studies carried out to develop a clearer understanding of the nickel oxyhydroxide electrode, a series of unique and useful specialized tests were developed. Some of these special tests were assembled to describe the methods that were found to be particularly useful in resolving a wide spectrum of manufacturing, operational, and storage issues related to nickel-hydrogen cells. The general methodology of these tests is given here with references listed to provide the reader with a more detailed understanding of the tests. The tests are classified according to the sequencing, starting with the impregnation of the nickel plaque material and culminating with the storage of completed cells. The details of the wet chemical procedures that were found to be useful because of their accuracy and reproducibility are given. The equations used to make the appropriate calculations are listed.

Development of an Instrument to Evaluate the Knowledge of Elementary Teachers about Venereal Disease.

ERIC Educational Resources Information Center

Schmidt, Norma G.

The purpose of this study was to develop a valid, reliable test to measure the knowledge of elementary school teachers about venereal disease. Recommended scientific test construction procedures were carefully followed. These included the development of a content outline and a table of specification; submitting potential test items to a review…

Development of a Three-Tier Test to Assess Misconceptions about Simple Electric Circuits

ERIC Educational Resources Information Center

Pesman, Haki; Eryilmaz, Ali

2010-01-01

The authors aimed to propose a valid and reliable diagnostic instrument by developing a three-tier test on simple electric circuits. Based on findings from the interviews, open-ended questions, and the related literature, the test was developed and administered to 124 high school students. In addition to some qualitative techniques for…

PROGRAM ASTEC (ADVANCED SOLAR TURBO ELECTRIC CONCEPT). PART IV. SOLAR COLLECTOR DEVELOPMENT SUPPORT TASKS. VOL. VII. ENGINEERING DEVELOPMENT GROUND TEST PLAN FOR THE ASTEC SOLAR ENERGY COLLECTOR.

DTIC Science & Technology

optical, and structural integrity of the full scale ASTEC solar collector before further development proceeds. This document specifies these initial...engineering ground tests recommended for testing petals and other critical components of the ASTEC collector. It defines the requirements and

Developing Pairwise Preference-Based Personality Test and Experimental Investigation of Its Resistance to Faking Effect by Item Response Model

ERIC Educational Resources Information Center

Usami, Satoshi; Sakamoto, Asami; Naito, Jun; Abe, Yu

2016-01-01

Recent years have shown increased awareness of the importance of personality tests in educational, clinical, and occupational settings, and developing faking-resistant personality tests is a very pragmatic issue for achieving more precise measurement. Inspired by Stark (2002) and Stark, Chernyshenko, and Drasgow (2005), we develop a pairwise…

SMS/GOES cell and battery data analysis report

NASA Technical Reports Server (NTRS)

Armantrout, J. D.

1977-01-01

The nickel-cadmium battery design developed for the Synchronous Meteorological Satellite (SMS) and Geostationary Operational Environmental Satellite (GOES) provided background and guidelines for future development, manufacture, and application of spacecraft batteries. SMS/GOES battery design, development, qualification testing, acceptance testing, and life testing/mission performance characteristics were evaluated for correlation with battery cell manufacturing process variables.

Superconducting power transmission system development. Cable insulation development

NASA Astrophysics Data System (ADS)

1983-09-01

The development of an underground superconducting power transmission system which is economical and technically attractive to the utility industry is discussed. Suitable superconductors and dielectric insulation were developed. Cables several hundred feet long are tested under realistic conditions. Three operating runs of about 2 weeks duration each were accomplished. The 60 Hz steady state performance of the cables under rated conditions was explored. Over voltage endurance tests and emergency level current tests were performed.

Waveform Generator Signal Processing Software

DOT National Transportation Integrated Search

1988-09-01

This report describes the software that was developed to process test waveforms that were recorded by crash test data acquisition systems. The test waveforms are generated by an electronic waveform generator developed by MGA Research Corporation unde...

Software error data collection and categorization

NASA Technical Reports Server (NTRS)

Ostrand, T. J.; Weyuker, E. J.

1982-01-01

Software errors detected during development of an interactive special purpose editor system were studied. This product was followed during nine months of coding, unit testing, function testing, and system testing. A new error categorization scheme was developed.

Autohesive strength development in polysulfone resin and graphite-polysulfone composites

NASA Technical Reports Server (NTRS)

Howes, Jeremy C.; Loos, Alfred C.

1988-01-01

The effects of bonding temperature and contact time on autohesive strength development in thermoplastic polysulfone resin and graphite-polysulfone composites were investigated. Two test methods were examined to measure autohesion in the neat resin samples. These included an interfacial tension test and a compact tension fracture toughness test. Autohesive strength development in fiber-reinforced composites was measured using a double cantilever beam interlaminar fracture toughness test. The results of the tests were compared with current diffusion theories explaining crack healing and welding of glassy polymers. Discrepancies between the results of the present investigation and the diffusion theories are discussed.

NE TARDIS Banner Event

NASA Image and Video Library

2017-12-08

NASA Kennedy Space Center's Engineering Director Pat Simpkins, at left, talks with Michael E. Johnson, a project engineer; and Emilio Cruz, deputy division chief in the Laboratories, Development and Testing Division, inside the Prototype Development Laboratory. A banner signing event was held to mark the successful delivery of a liquid oxygen test tank, called Tardis. Engineers and technicians worked together to develop the tank and build it at the lab to support cryogenic testing at Johnson Space Center's White Sands Test Facility in Las Cruces, New Mexico. The 12-foot-tall, 3,810-pound aluminum tank will be shipped to White Sands for testing.

Cost effectiveness as applied to the Viking Lander systems-level thermal development test program

NASA Technical Reports Server (NTRS)

Buna, T.; Shupert, T. C.

1974-01-01

The economic aspects of thermal testing at the systems-level as applied to the Viking Lander Capsule thermal development program are reviewed. The unique mission profile and pioneering scientific goals of Viking imposed novel requirements on testing, including the development of a simulation technique for the Martian thermal environment. The selected approach included modifications of an existing conventional thermal vacuum facility, and improved test-operational techniques that are applicable to the simulation of the other mission phases as well, thereby contributing significantly to the cost effectiveness of the overall thermal test program.

Saturn Apollo Program

NASA Image and Video Library

1965-01-01

S-IB-200D, a dynamic test version of the Saturn IB launch vehicle's first stage (S-IB), makes its way to the Marshall Space Flight Center (MSFC) East Test Area on January 4, 1965. Test Laboratory persornel assembled a complete Saturn IB to test the structural soundness of the launch vehicle in the Dynamic Test Stand. Developed by the MSFC as an interim vehicle in MSFC's "building block" approach to the Saturn rocket development, the Saturn IB utilized Saturn I technology to further develop and refine the larger boosters and the Apollo spacecraft capabilities required for the manned lunar missions.

Can Alberta infant motor scale and milani comparetti motor development screening test be rapid alternatives to bayley scales of infant development-II at high-risk infants

PubMed Central

Yıldırım, Zeynep Hoşbay; Aydınlı, Nur; Ekici, Barış; Tatlı, Burak; Çalişkan, Mine

2012-01-01

Purpose: The main object of the present study is to assess neuromotor development of high-risk infants by using three tests, and to determine inter-test concordance and the feasibility of these tests. Materials and Methods: One-hundred and nine patients aged between 0 and 6 months and identified as “high-risk infant” according to the Kliegman's criteria were enrolled to the study. Three different tests were used to assess neuromotor development of the patients: Bayley scales of infant development-II (BSID-II), Alberta infant motor scale (AIMS), and Milani Comparetti Motor Development Screening Test (MCMDST). Results: Correlation analysis was performed between pure scores of BSID-II motor scale and total scores of AIMS. These two tests were highly correlated (r:0.92). Moderate concordance was found between BSID-II and AIMS (k:0.35). Slight concordance was found between BSID-II and MCMDST; and the concordance was slight again for AIMS and MCMDST (k:0.11 and k:0.16, respectively) too. Conclusion: AIMS has a high correlation and consistency with BSID-II and can be used with routine neurological examination as it is based on observations, has few items, and requires less time to complete. PMID:22919192

Can Alberta infant motor scale and milani comparetti motor development screening test be rapid alternatives to bayley scales of infant development-II at high-risk infants.

PubMed

Yıldırım, Zeynep Hoşbay; Aydınlı, Nur; Ekici, Barış; Tatlı, Burak; Calişkan, Mine

2012-07-01

The main object of the present study is to assess neuromotor development of high-risk infants by using three tests, and to determine inter-test concordance and the feasibility of these tests. One-hundred and nine patients aged between 0 and 6 months and identified as "high-risk infant" according to the Kliegman's criteria were enrolled to the study. Three different tests were used to assess neuromotor development of the patients: Bayley scales of infant development-II (BSID-II), Alberta infant motor scale (AIMS), and Milani Comparetti Motor Development Screening Test (MCMDST). Correlation analysis was performed between pure scores of BSID-II motor scale and total scores of AIMS. These two tests were highly correlated (r:0.92). Moderate concordance was found between BSID-II and AIMS (k:0.35). Slight concordance was found between BSID-II and MCMDST; and the concordance was slight again for AIMS and MCMDST (k:0.11 and k:0.16, respectively) too. AIMS has a high correlation and consistency with BSID-II and can be used with routine neurological examination as it is based on observations, has few items, and requires less time to complete.

Spacecraft attitude control using a smart control system

NASA Technical Reports Server (NTRS)

Buckley, Brian; Wheatcraft, Louis

1992-01-01

Traditionally, spacecraft attitude control has been implemented using control loops written in native code for a space hardened processor. The Naval Research Lab has taken this approach during the development of the Attitude Control Electronics (ACE) package. After the system was developed and delivered, NRL decided to explore alternate technologies to accomplish this same task more efficiently. The approach taken by NRL was to implement the ACE control loops using systems technologies. The purpose of this effort was to: (1) research capabilities required of an expert system in processing a classic closed-loop control algorithm; (2) research the development environment required to design and test an embedded expert systems environment; (3) research the complexity of design and development of expert systems versus a conventional approach; and (4) test the resulting systems against the flight acceptance test software for both response and accuracy. Two expert systems were selected to implement the control loops. Criteria used for the selection of the expert systems included that they had to run in both embedded systems and ground based environments. Using two different expert systems allowed a comparison of the real-time capabilities, inferencing capabilities, and the ground-based development environment. The two expert systems chosen for the evaluation were Spacecraft Command Language (SCL), and NEXTPERT Object. SCL is a smart control system produced for the NRL by Interface and Control Systems (ICS). SCL was developed to be used for real-time command, control, and monitoring of a new generation of spacecraft. NEXPERT Object is a commercially available product developed by Neuron Data. Results of the effort were evaluated using the ACE test bed. The ACE test bed had been developed and used to test the original flight hardware and software using simulators and flight-like interfaces. The test bed was used for testing the expert systems in a 'near-flight' environment. The technical approach, the system architecture, the development environments, knowledge base development, and results of this effort are detailed.

Development and psychometric evaluation of an information literacy self-efficacy survey and an information literacy knowledge test.

PubMed

Tepe, Rodger; Tepe, Chabha

2015-03-01

To develop and psychometrically evaluate an information literacy (IL) self-efficacy survey and an IL knowledge test. In this test-retest reliability study, a 25-item IL self-efficacy survey and a 50-item IL knowledge test were developed and administered to a convenience sample of 53 chiropractic students. Item analyses were performed on all questions. The IL self-efficacy survey demonstrated good reliability (test-retest correlation = 0.81) and good/very good internal consistency (mean κ = .56 and Cronbach's α = .92). A total of 25 questions with the best item analysis characteristics were chosen from the 50-item IL knowledge test, resulting in a 25-item IL knowledge test that demonstrated good reliability (test-retest correlation = 0.87), very good internal consistency (mean κ = .69, KR20 = 0.85), and good item discrimination (mean point-biserial = 0.48). This study resulted in the development of three instruments: a 25-item IL self-efficacy survey, a 50-item IL knowledge test, and a 25-item IL knowledge test. The information literacy self-efficacy survey and the 25-item version of the information literacy knowledge test have shown preliminary evidence of adequate reliability and validity to justify continuing study with these instruments.

Rigging Test Bed Development for Validation of Multi-Stage Decelerator Extractions

NASA Technical Reports Server (NTRS)

Kenig, Sivan J.; Gallon, John C.; Adams, Douglas S.; Rivellini, Tommaso P.

2013-01-01

The Low Density Supersonic Decelerator project is developing new decelerator systems for Mars entry which would include testing with a Supersonic Flight Dynamics Test Vehicle. One of the decelerator systems being developed is a large supersonic ringsail parachute. Due to the configuration of the vehicle it is not possible to deploy the parachute with a mortar which would be the preferred method for a spacecraft in a supersonic flow. Alternatively, a multi-stage extraction process using a ballute as a pilot is being developed for the test vehicle. The Rigging Test Bed is a test venue being constructed to perform verification and validation of this extraction process. The test bed consists of a long pneumatic piston device capable of providing a constant force simulating the ballute drag force during the extraction events. The extraction tests will take place both inside a high-bay for frequent tests of individual extraction stages and outdoors using a mobile hydraulic crane for complete deployment tests from initial pack pull out to canopy extraction. These tests will measure line tensions and use photogrammetry to track motion of the elements involved. The resulting data will be used to verify packing and rigging as well, as validate models and identify potential failure modes in order to finalize the design of the extraction system.

Generic Helicopter-Based Testbed for Surface Terrain Imaging Sensors

NASA Technical Reports Server (NTRS)

Alexander, James; Goldberg, Hannah; Montgomery, James; Spiers, Gary; Liebe, Carl; Johnson, Andrew; Gromov, Konstantin; Konefat, Edward; Lam, Raymond; Meras, Patrick

2008-01-01

To be certain that a candidate sensor system will perform as expected during missions, we have developed a field test system and have executed test flights with a helicopter-mounted sensor platform over desert terrains, which simulate Lunar features. A key advantage to this approach is that different sensors can be tested and characterized in an environment relevant to the flight needs prior to flight. Testing the various sensors required the development of a field test system, including an instrument to validate the truth of the sensor system under test. The field test system was designed to be flexible enough to cover the test needs of many sensors (lidar, radar, cameras) that require an aerial test platform, including helicopters, airplanes, unmanned aerial vehicles (UAV), or balloons. To validate the performance of the sensor under test, the dynamics of the test platform must be known with sufficient accuracy to provide accurate models for input into algorithm development. The test system provides support equipment to measure the dynamics of the field test sensor platform, and allow computation of the truth position, velocity, attitude, and time.

Design development of graphite primary structures enables SSTO success

DOE Office of Scientific and Technical Information (OSTI.GOV)

Biagiotti, V.A.; Yahiro, J.S.; Suh, D.E.

1997-01-01

This paper describes the development of a graphite composite wing and a graphite composite intertank primary structure for application toward Single-Stage to Orbit space vehicles such as those under development in NASA{close_quote}s X-33/Reusable Launch Vehicle (RLV) Program. The trade study and designs are based on a Rockwell vertical take-off and horizontal landing (VTHL) wing-body RLV vehicle. Northrop Grumman{close_quote}s approach using a building block development technique is described. Composite Graphite/Bismaleimide (Gr/BMI) material characterization test results are presented. Unique intertank and wing composite subcomponent test article designs are described and test results to date are presented. Wing and intertank Full Scale Sectionmore » Test Article (FSTA) objectives and designs are outlined. Trade studies, supporting building block testing, and FSTA demonstrations combine to develop graphite primary structure composite technology that enables developing X-33/RLV design programs to meet critical SSTO structural weight and operations performance criteria. {copyright} {ital 1997 American Institute of Physics.}« less

Risk-Based Object Oriented Testing

NASA Technical Reports Server (NTRS)

Rosenberg, Linda H.; Stapko, Ruth; Gallo, Albert

2000-01-01

Software testing is a well-defined phase of the software development life cycle. Functional ("black box") testing and structural ("white box") testing are two methods of test case design commonly used by software developers. A lesser known testing method is risk-based testing, which takes into account the probability of failure of a portion of code as determined by its complexity. For object oriented programs, a methodology is proposed for identification of risk-prone classes. Risk-based testing is a highly effective testing technique that can be used to find and fix the most important problems as quickly as possible.