Sample records for itri
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Boecker, B.B.; Muggenburg, B.A.; Miller, S.C.
This report describes the scientific progress in, and current status of, life-span studies of the long-term health risks in Beagle dogs of chronic irradiation from internally deposited radionuclides or from an external source. The reporting period for this document is the 2-year period from October 1, 1991 through September 30, 1993. Studies that were initiated at three different laboratories (Inhalation Toxicology Research Institute, ITRI, University of Utah, and Argonne National Laboratory, ANL) are presented here because they are being completed at ITRI. All living dogs in the Utah-initiated studies were transferred to the ITRI facility for the remainder of theirmore » life-span observations and measurements in September 1987. This report is the fourth in a series of reports dealing with the current status and progress of both the Utah and ITRI studies. Other life-span studies involving dogs exposed to gamma radiation from an external source were initiated and conducted for many years at ANL. In 1991, the decision was made to discontinue the chronic irradiation of the remaining living dogs and to transfer all remaining dogs to ITRI for care, clinical observations, and pathological observations at death or euthanasia. This report provides the current status of these dogs. Status reports on the Utah and ITRI studies comprise most of this report. The ITRI-related section presents brief statements of project objectives, the general procedures used in these studies, and some study-specific features for each of the 19 studies being conducted with either beta- or alpha-emitting radionuclides. Dose- and effect-modifying factors being addressed in these studies include total dose, dose rate, LET, solubility, nonuniformity of dose, species, age, sex, health status, and mode of exposure. Recent additions to experimental protocols for studies in which dogs are still alive involve the collection and analysis of tumor tissues using currently available molecular biology techniques.« less
-
ITRI Informational Text Reading Inventory: Grade 5 Teacher Guide
ERIC Educational Resources Information Center
Center for Innovation in Assessment (NJ1), 2013
2013-01-01
The Grade 5 Informational Text Reading Inventory (ITRI) was developed to address the specific reading challenges that grade 5 students encounter when reading their textbooks and other informational text. In fifth grade, students are expected not only to comprehend difficult passages, but also to extend their comprehension through drawing…
-
ITRI Informational Text Reading Inventory: Grade 3 Teacher Guide
ERIC Educational Resources Information Center
Center for Innovation in Assessment (NJ1), 2013
2013-01-01
The Grade 3 Informational Text Reading Inventory (ITRI) was developed to address the specific reading challenges that grade 3 students encounter as they move from reading largely narrative textbooks in grade 2 to being expected to read and comprehend more dense and content-driven text in grade 3. This booklet contains all of the information…
-
Inhalation Toxicology Research Institute. Annual report, October 1, 1995--September 30, 1996
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bice, D.E.; Hahn, F.F.; Henderson, R.F.
1996-12-01
The Inhalation Toxicology Research Institute (ITRI) is a Government-owned facility leased and operated by the Lovelace Biomedical and Environmental Research Institute (LBERI) as a private, nonprofit research and testing laboratory. LBERI is an operating subsidiary of the Lovelace Respiratory Research Institute. Through September 30, 1996, ITRI was a Federally Funded Research and Development Center operated by Lovelace for the US Department of Energy (DOE) as a {open_quotes}Single Program Laboratory{close_quotes} within the DOE Office of Health and Environmental Research, Office of Energy Research. Work for DOE continues in the privatized ITRI facility under a Cooperative Agreement. At the time of publication,more » approximately 70% of the Institute`s research is funded by DOE, and the remainder is funded by a variety of Federal agency, trade association, individual industry, and university customers. The principal mission of ITRI is to conduct basic and applied research to improve our understanding of the nature and magnitude of the human health impacts of inhaling airborne materials in the home, workplace, and general environment. Institute research programs have a strong basic science orientation with emphasis on the nature and behavior of airborne materials, the fundamental biology of the respiratory tract, the fate of inhaled materials and the mechanisms by which they cause disease, and the means by which data produced in the laboratory can be used to estimate risks to human health. Disorders of the respiratory tract continue to be a major health concern, and inhaled toxicants are thought to contribute substantially to respiratory morbidity. As the country`s largest facility dedicated to the study of basic inhalation toxicology, ITRI provides a national resource of specialized facilities, personnel, and educational activities serving the needs of government, academia, and industry.« less
-
NASA Astrophysics Data System (ADS)
Viallon, Joële; Idrees, Faraz; Moussay, Philippe; Wielgosz, Robert; Lin, Tsai-Yin; Norris, James E.; Hodges, Joseph T.
2017-01-01
As part of the on-going key comparison BIPM.QM-K1, a comparison has been performed between the ozone national standard of the ITRI Center for Measurement Standards (CMS-ITRI) and the common reference standard of the key comparison, maintained by the Bureau International des Poids et Mesures (BIPM), via a transfer standard maintained by the National Institute of Standards and Technology (NIST). The instruments have been compared over a nominal ozone amount-of-substance fraction range of 0 nmol/mol to 500 nmol/mol. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).
-
Progress of applied superconductivity research at Materials Research Laboratories, ITRI (Taiwan)
NASA Technical Reports Server (NTRS)
Liu, R. S.; Wang, C. M.
1995-01-01
A status report based on the applied high temperature superconductivity (HTS) research at Materials Research Laboratories (MRL), Industrial Technology Research Institute (ITRI) is given. The aim is to develop fabrication technologies for the high-TC materials appropriate to the industrial application requirements. To date, the majorities of works have been undertaken in the areas of new materials, wires/tapes with long length, prototypes of magnets, large-area thin films, SQUID's and microwave applications.
-
3D interconnect metrology in CMS/ITRI
NASA Astrophysics Data System (ADS)
Ku, Y. S.; Shyu, D. M.; Hsu, W. T.; Chang, P. Y.; Chen, Y. C.; Pang, H. L.
2011-05-01
Semiconductor device packaging technology is rapidly advancing, in response to the demand for thinner and smaller electronic devices. Three-dimensional chip/wafer stacking that uses through-silicon vias (TSV) is a key technical focus area, and the continuous development of this novel technology has created a need for non-contact characterization. Many of these challenges are novel to the industry due to the relatively large variety of via sizes and density, and new processes such as wafer thinning and stacked wafer bonding. This paper summarizes the developing metrology that has been used during via-middle & via-last TSV process development at EOL/ITRI. While there is a variety of metrology and inspection applications for 3D interconnect processing, the main topics covered here are via CD/depth measurement, thinned wafer inspection and wafer warpage measurement.
-
NASA Astrophysics Data System (ADS)
Hung, Chen-Chuan; Jian, Wu; Changpan, Tawat
2009-01-01
This report describes the key comparison APMP.M.P-K6.1 among the three national metrology institutes, Center for Measurement Standards-ITRI (CMS-ITRI, Taiwan), SPRING Singapore and National Institute of Metrology (NIMT), in the pressure range from 20 kPa to 105 kPa in gas media and gauge mode executed during the period April 2003 to April 2004. This comparison was conducted by CMS-ITRI and was based on the calibration procedure of APMP pneumatic pressure comparison APMP.M.P-K6. We intended to link to the CCM.P-K6 key comparison through the APMP.M.P-K6 key comparison by using the proposed linkage method in the APMP.M.P-K6 key comparison to determine a linking factor that can transform the quantities measured in the APMP.M.P-K6.1 key comparison. All three participating institutes used pneumatic piston gauges as their pressure standards. The Ruska 2465 gas-operated piston-cylinder assembly TL-1409 used as transfer standard offered by CMS-ITRI was calibrated three times by the pilot institute during the comparison period and showed that it was very stable after evaluation. The comparison was conducted on the basis of cross-float experiments to determine the effective area of transfer standards from the national standards of three institutes. The comparison results (as shown in Table 6) were equivalent to the CCM.P-K6 comparison and the relative bilateral degrees of equivalence between two laboratories were smaller than 39.7 × 10-6 from 20 kPa to 105 kPa. These results showed all participating institutes measuring the same quantity in the whole pressure range lay within their expanded uncertainty with confidence level 95%. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCM, according to the provisions of the CIPM Mutual Recognition Arrangement (MRA).
-
Biological effects of {sup 137}CsCl injected in beagle dogs of different dogs
DOE Office of Scientific and Technical Information (OSTI.GOV)
Nikula, K.J.; Boecker, B.B.; Griffith, W.C.
The toxicity of {sup 137}Cs in the beagle dog was investigated at the Inhalation Toxicology Research Institute (ITRI) and Argonne National Laboratory (ANL) as part of programs to evaluate the biological effects of both radionuclides in atomic bomb fallout and internally deposited fission-product radionuclides. In the ITRI study, young adult dogs were exposed once by intravenous injection to a range of {sup 137}Cs concentrations; the results have recently been published. The purpose of the present report is to summarize the ANL study and to compare the results of the two studies. At ANL, 63 dogs in three age groups (15more » juveniles, 142-151 days old; 38 young adults, 388-427 days old; and 10 middle-aged dogs, 1387-2060 days old) were given {sup 137}Cs intravenously at levels (61-162f MBq/kg) near those expected to be lethal within 30 days after injection. There were 17 control dogs from the same colony. Twenty-three of the dogs injected with {sup 137}Cs, including all middle-aged dogs, died within 52 days after injection due to hematopoietic cell damage resulting in severe pancytopenia that led to fatal hemorrhage and/or septicemia. The other significant early effect was damage to the germinal epithelium of the seminiferous tubules. The design of the ANL study revealed an age- and gender-related differential radiosensitivity for early effects. The middle-aged dogs died significantly earlier due to complications of hematological dyscrasia compared to the juvenile and young adult dogs, and the middle-aged females died significantly earlier than the middle-aged males. The most significant non-neoplastic late effects in the {sup 137}Cs-injected dogs from ANL and ITRI were atrophy of the germinal epithelium of seminiferous tubules with azoospermia, and a significant dose-dependent decrease in survival. The survival of the ANL dogs was decreased more than that of the ITRI dogs at similar radiation doses from {sup 137}Cs. 19 refs., 6 figs., 4 tabs.« less
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Yeh, Hsu-Chi; Phalen, R.F.; Chang, I.
1995-12-01
The National Council on Radiation Protection and Measurements (NCRP) in the United States and the International Commission on Radiological Protection (ICRP) have been independently reviewing and revising respiratory tract dosimetry models for inhaled radioactive aerosols. The newly proposed NCRP respiratory tract dosimetry model represents a significant change in philosophy from the old ICRP Task Group model. The proposed NCRP model describes respiratory tract deposition, clearance, and dosimetry for radioactive substances inhaled by workers and the general public and is expected to be published soon. In support of the NCRP proposed model, ITRI staff members have been developing computer software. Althoughmore » this software is still incomplete, the deposition portion has been completed and can be used to calculate inhaled particle deposition within the respiratory tract for particle sizes as small as radon and radon progeny ({approximately} 1 nm) to particles larger than 100 {mu}m. Recently, ICRP published their new dosimetric model for the respiratory tract, ICRP66. Based on ICRP66, the National Radiological Protection Board of the UK developed PC-based software, LUDEP, for calculating particle deposition and internal doses. The purpose of this report is to compare the calculated respiratory tract deposition of particles using the NCRP/ITRI model and the ICRP66 model, under the same particle size distribution and breathing conditions. In summary, the general trends of the deposition curves for the two models were similar.« less
-
Endothelialized ePTFE Graft by Nanobiotechnology
2013-11-29
The Apparatus for Processing the Tubular Graft Modification Will be Designed and Evaluated.; The On-site Capturing of the Endothelial (Progenitor) Cells by Peptide-mediated Selective Adhesion in Vitro and in Vivo Will Also be Elucidated.; The Patency Rate of ITRI-made Artificial Blood Vessels Will be Evaluated by the Porcine Animal Model.
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Newton, G.J.; Hoover, M.D.
1995-12-01
Determination of the appropriate number and placement of air monitors in the workplace is quite subjective and is generally one of the more difficult tasks in radiation protection. General guidance for determining the number and placement of air sampling and monitoring instruments has been provided by technical reports such as Mishima, J. These two documents and other published guidelines suggest that some insight into sampler placement can be obtained by conducting airflow studies involving the dilution and clearance of the relatively inert tracer gas sulfur hexafluoride (SF{sub 6}) in sampler placement studies and describes the results of a study donemore » within the ITRI alpha inhalation exposure laboratories. The objectives of the study were to document an appropriate method for conducting SF{sub 6} dispersion studies, and to confirm the appropriate number and placement of air monitors and air samplers within a typical ITRI inhalation exposure laboratory. The results of this study have become part of the technical bases for air sampling and monitoring in the test room.« less
-
Inhalation Toxicology Research Institute annual report, October 1, 1994--September 30, 1995
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bice, D.E.; Hahn, F.F.; Hoover, M.D.
1995-12-01
The mission of the Inhalation Toxicology Research Institute (ITRI) is to conduct basic and applied research to improve the understanding of the nature and magnitude of the human health impacts of inhaling airborne materials in the home, workplace, and general environment. Institute research programs have a strong basic science orientation with emphasis on the nature and behavior of airborne materials, the fundamental biology of the respiratory tract, the fate of inhaled materials and the mechanisms by which they cause disease, and the means by which data produced in the laboratory can be used to estimate risks to human health. Disordersmore » of the respiratory tract continue to be a major health concern, and inhaled toxicants are thought to contribute substantially to respiratory morbidity. As the largest laboratory dedicated to the study of basic inhalation toxicology, ITRI provides a national resource of specialized facilities, personnel, and educational activities serving the needs of government, academia, and industry. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.« less
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-09-14
... Taiwan and ITRI International Inc. of San Jose, California. A letter supplementing the complaint was... (``the `932 patent''). The complaint further alleges that an industry in the United States exists as... patent, and whether an industry in the United States exists as required by subsection (a)(2) of section...
-
Inhalation Toxicology Research Institute Annual Report, 1992-1993
1993-11-01
for Mineral and Energy Technology ( CANMET ). The ITRI team participated in all phases of the intercomparison studies. The methods, procedures, and...differential cloning, and differential hybridization techniques. However, with recent advances in polymerase chain reaction (PCR) technology , an...viii I. AEROSOL TECHNOLOGY AND CHARACTERIZATION OF AIRBORNE MATERIALS Measurement of Thoron and Thoron/Radon Mixtures Y. S. Cheng and H. C. Yeh Use of a
-
Biennial Report on Long-Term Dose-Response Studies of Inhaled or Injected Radionuclides, 1991 - 1993
1994-01-01
found, multiple uterine fibromas, mammary adenomas, a parathyroid adenoma, and bilateral adrenal cortical adenomas. Dog 1106A, a male control, was...fibroma and uterine leiomyoma. Dog 1154S, a female with an ILB of 0.13 kBq 239Pu/kg body weight, was found dead 5016 days after exposure. At necropsy...vi I ITRI LIFE-SPAN STUDIES IN DOGS ............................................... I A. SPECIFIC PROJECT
-
1 ALPHA-Hydroxyvitamin D5 as a Chemotherapeutic and Possibly Chemopreventive Agent
2004-09-01
with differential, platelets, PT, and PTT. 7.1.4 Serum chemistries : glucose, electrolytes (Na+, K+, Cl-, C0 2), BUN, creatinine, total protein... chemistries : glucose, electrolytes (Na+, K+, Cl-, and C02), BUN, creatinine, total protein, albumin, bilirubin, alkaline phosphatase, LDH, SGOT, SGPT, calcium...Roberts AB, Goodman DS (eds) The Retinoids: Biology, Chemistry , and Medicine. New York: Raven, 1994, pp. 573-596. 3. Hong WK, Itri LM. Retinoids and human
-
Robust Learning and Segmentation for Scene Understanding
2005-05-01
early mecha- nisms. J. Optical Soc. Am. A, 7(5):923–932, May 1990. [43] R . Malladi , J. A. Sethian, and B. C. Vemuri. Shape modelling with front prop...Honda R &D Co., Ltd., Industrial Technology Research Institute (ITRI), Komatsu Ltd., Eu- gene McDermott Foundation, Merrill-Lynch, NEC Fund, Oxygen...points outside the circle. For each point on the circle of radius r , the similarity of the patch around it is compared to patches along the line of
-
Delivery of aerosolized drugs encapsulated in liposomes
DOE Office of Scientific and Technical Information (OSTI.GOV)
Cheng, Yung-Sung; Lyons, C.R.; Schmid, M.H.
1995-12-01
Mycobacterium tuberculosis (Mtb) is an infectious disease that resides in the human lung. Due to the difficulty in completely killing off the disease in infected individuals, Mtb has developed drug-resistant forms and is on the rise in the human population. Therefore, ITRI and the University of New Mexico are collaborating to explore the treatment of Mtb by an aerosolized drug delivered directly to the lungs. In conclusion, it is feasible to obtain an appropriate size and concentration of the liposomes before and after aerosolization.
-
Representative Command Post Configurations, C3 Structures, and Reference Data. Volume I.
1978-07-31
when it becomes cost effective. (4) The configurations and employment concepts can be used for electronic warfare (EW) studies. The detailed layouts...TJI/0! 0, LIKAS INFCCOPERATOR mmTmOE1110"m - -.- an SKI WeI TIpO .o..< - UN THAN do Ma uSIm TIo a D CIM 1 0 ~To NtEN INTRABATTERY WIRE COMMUNICATIONS...34 DE ATTACH/ GIVARO I TTRY -IVARTY ATTACH/ A I A COMG REINF COMO SOC TOC NEW ITRY I (WO NTE 21O (NOTE 21 UNITS FCC FOC FCIR NOTES: I. COUNTERMORTAR
-
1991-04-01
week and two years (subchronic GMRL studies versus chronic ITRI and Fh-ITA studies ); exposure concentrations were changed by a factor of 40 (Fh-ITA...a forum for the publication of studies involving inhalation of particles and gases in the respiratory tract, covering the use of aerosols as tools to... study basic physiologic phenomena, their use as selective delivery systems for medication, and the toxic effects of inhaled agents. JOURNAL OF AEROSOL
-
Toxicity of injected radium-226 in immature dogs
DOE Office of Scientific and Technical Information (OSTI.GOV)
Muggenburg, B.A.; Hahn, F.F.; Griffith, W.C.
1995-12-01
This study was conducted to determine the toxicity of injected {sup 226}Ra in immature dogs and to compare the results with those from studies of injected {sup 226}Ra in young adult dogs. An historic objective of these studies, initiated at the University of Utah and continued at ITRI, was to compare the results in dogs to the population of dial painters who ingested {sup 226}Ra as young adults. Age at the time of exposure is considered to be an important factor in dosimetry and risk of developing radiation-induced disease, particularly bone cancer. In summary, dogs injected with {sup 226}Ra whenmore » immature had increased occurrences of bone tumors in a dose-related fashion.« less
-
APMP Pilot Study on Transmittance Haze
NASA Astrophysics Data System (ADS)
Liu, Wen-Chun; Hwang, Jisoo; Koo, Annette; Wu, Houping; Leecharoen, Rojana; Yu, Hsueh-Ling
2018-02-01
Five NMIs within APMP, including CMS/ITRI, MSL, NIM, NIMT and KRISS from TCPR applied to the APMP technical committee initiative project for funding to carry out a pilot comparison of transmittance haze in 2012. The project started in 2014 and the final report was completed at the end of 2016. In this pilot comparison, three different haze standards were adopted, and transmittance haze for each standard was measured according to ASTM D1003 or ISO 14782. This paper presents the first results of an APMP pilot study of transmittance haze and the analysis of the variation among different haze measurement systems which are commonly used. The study shows that the variables such as sphere multiplier, transmittance distribution, fluorescence of samples and optical path of the incident beam cause discrepancies among NMIs and highlight deficiencies in current documentary standards.
-
Optimal front light design for reflective displays under different ambient illumination
NASA Astrophysics Data System (ADS)
Wang, Sheng-Po; Chang, Ting-Ting; Li, Chien-Ju; Bai, Yi-Ho; Hu, Kuo-Jui
2011-01-01
The goal of this study is to find out the optimal luminance and color temperature of front light for reflective displays in different ambient illumination by conducting series of psychophysical experiments. A color and brightness tunable front light device with ten LED units was built and been calibrated to present 256 luminance levels and 13 different color temperature at fixed luminance of 200 cd/m2. The experiment results revealed the best luminance and color temperature settings for human observers under different ambient illuminant, which could also assist the e-paper manufacturers to design front light device, and present the best image quality on reflective displays. Furthermore, a similar experiment procedure was conducted by utilizing new flexible e-signage display developed by ITRI and an optimal front light device for the new display panel has been designed and utilized.
-
Generation and characterization of biological aerosols for laser measurements
DOE Office of Scientific and Technical Information (OSTI.GOV)
Cheng, Yung-Sung; Barr, E.B.
1995-12-01
Concerns for proliferation of biological weapons including bacteria, fungi, and viruses have prompted research and development on methods for the rapid detection of biological aerosols in the field. Real-time instruments that can distinguish biological aerosols from background dust would be especially useful. Sandia National Laboratories (SNL) is developing a laser-based, real-time instrument for rapid detection of biological aerosols, and ITRI is working with SNL scientists and engineers to evaluate this technology for a wide range of biological aerosols. This paper describes methods being used to generate the characterize the biological aerosols for these tests. In summary, a biosafe system hasmore » been developed for generating and characterizing biological aerosols and using those aerosols to test the SNL laser-based real-time instrument. Such tests are essential in studying methods for rapid detection of airborne biological materials.« less
-
NASA Astrophysics Data System (ADS)
Fu, Wei-En
2014-03-01
Proceedings of the 14th International Conference, Taipei, Taiwan, 17th-21st June, 2013 Taiwan Organized by: Center for Measurement Standards/Industrial Technology Research Institute Mechanical and Systems Research Laboratories/Industrial Technology Research Institute National Taiwan University National Cheng Kung University National Taiwan University of Science and Technology National Tsing Hua University Greetings from Chairman of International Programme CommitteeTom Thomas When Professor Ken Stout and I founded this series of conferences in the United Kingdom more than thirty years ago, we did not anticipate its longevity or its success. Since that first meeting at Leicester, the conference has been often held in England, but also in several other European countries: France, Poland and Sweden, as well as in the United States. Ken, sadly no longer with us, would be proud of what it has achieved and has come to represent. Generations of researchers have presented their new ideas and innovations here which are now embodied in many textbooks and international standards. But this conference in 2013 marks a new departure and perhaps a new future. For the first time it is being held in Asia, reflecting the historic rise of the economies of the Pacific Rim, adding modern technology to their long-existing traditions of ordered insight and precise craftsmanship. Many of you have travelled far to attend this meeting, and we hope you will feel your trouble has been rewarded. We have an excellent selection of papers from all over the world from many of the world's experts, embodying the consolidation of tested ideas as well as the latest advances in the subject. These will be set in context by a glittering array of keynote and invited speakers. On behalf of the International Programme Committee, I am glad to acknowledge the hard work of the members of the Local Organising Committee in putting the programme together and making all the arrangements, and to accept their hospitality. It is my privilege and pleasure to welcome you all to the 14th International Conference on Metrology and Properties of Engineering Surfaces here in Taipei. Tom Thomas Halmstad, 1st June 2013 Greetings from Chairman of Local Organizing CommitteeVictor Lin It is the great honor of Center for Measurement Standards (CMS), metrology group of Industrial Technology Research Institute (ITRI), to host the 14th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2013) from 17-21 June, 2013, in Taipei, Taiwan. In collaboration with four local universities, National Taiwan University (NTU), National Cheng-Kung University (NCKU), National Taiwan University of Science and Technology (NTST) and National Tsing-Hua University (NTHU), we have spent more than one year to prepare this Conference since the approval by the International Programme Committee (IPC). With the guidance from the IPC, we are able to go through the laborious, but important, process of paper selection and review from more than 100 submissions, and also to maintain the tradition in gathering the high quality and state-of-the-art papers. Finally, more than 65 full papers are collected in the programme (oral and poster), and over 120 surface metrologists from 17 countries (or economies) will attend the Conference. As stated in the preface by Professor Thomas, this series of conferences were founded by Tom and late Professor Ken Stout in the United Kingdom more than thirty years ago. I was lucky to join Ken's research group in Birmingham, and to start my journey over surface metrology in 1989, under the financial support from ITRI. With the encouragement from Professor Liam Blunt and endeavors of my colleagues, we are able to hold the Conference first time in emerging Asia, and to ''carry on the heritage and pave the way to the future'' (a Chinese proverb) in surface metrology. Taiwan is also known as Formosa, from Portuguese Ilha Formosa, which means ''Beautiful Island''. Besides the inspiring scientific arrangements, I encourage you to taste Taiwan's wonderful gourmet cuisine, and to explore the beauty of the sweet-potato-shaped island. I wish you a joyful, fruitful and memorable stay. Victor TY Lin, PhD Chairman Local Organizing Committee Met & Props 2013 International Programme Committee Professor Mohamed El Mansori (Arts et Metiers ParisTech, France) Professor H Zahouani (Ecole Centrale de Lyon, France) Professor B-G Rosen (Halmstad University, Sweden) Professor Tom R Thomas (Halmstad University, Sweden) Professor Liam Blunt (University of Huddersfield, UK) Professor Richard Leach (National Physical Laboratory, UK) Professor Chris Brown (Worcester Polytechnic Institute, USA) Dr Jia-Ruey Duann (Center for Measurement Standards, ITRI, Taiwan) International Scientific Committee Professor H Zahouani (Ecole Centrale de Lyon, France) Dr Rolf Krüger-Sehm (Physikalisch-Technische Bundesanstalt, Germany) Professor Pawel Pawlus (Rzeszów University of Technology, Poland) Professor B-G Rosen (Halmstad University, Sweden) Professor Tom R Thomas (Halmstad University, Sweden) Professor Liam Blunt (University of Huddersfield, UK) Professor Derek Chetwynd (University of Warwick, UK) Professor Jane Jiang (University of Huddersfield, UK) Professor Richard Leach (National Physical Laboratory, UK) Professor Paul Scott (University of Huddersfield, UK) Dr Andrew Yacoot (National Physical Laboratory, UK) Professor Chris Brown (Worcester Polytechnic Institute, USA) Dr Chris Evans (University of North Carolina at Charlotte, USA) Professor Jay Raja (University of North Carolina at Charlotte, USA) Dr Ted Vorburger (National Institute of Standards and Technology, USA) Dr Andrew Baker (National Measurement Institute, Australia) Professor David Lee Butler (Nanyang Technological University, Singapore) Dr Benny Cheung (The Hong Kong Polytechnic University, China) Professor Yetai Fei (Hefei University of Technology, China) Dr Kazuya Naoi (National Metrology Institute of Japan, Japan) Dr Heui-Jae Pahk (SNU Precision Co. Ltd., Korea) Professor Jiu-Bin Tan (Harbin Institute of Technology, China) Ms. Siew-Leng Tan (National Metrology Centre (NMC/A*STAR), Singapore) Mr. A. Tonmueanwai (National Institute of Metrology, Thailand (NIMT), Thailand) Professor Kazuhisa Yanagi (Nagaoka University, Japan) Local Organizing Committee Dr Victor Tzeng-Yow Lin (Center for Measurement Standards, ITRI, Taiwan) Professor Kuang-Chao Fan (National Taiwan University, Taiwan) Professor Jen-Fin Lin (ASME Fellow, National Cheng Kung University, Taiwan) Professor Chao-Chang Chen(National Taiwan University of Science and Technology, Taiwan) Professor Shih-Chieh Lin (National Tsing Hua University, Taiwan) Professor Liang-Chia Chen (National Taiwan University, Taiwan) Professor Fang-Jung Shiou (National Taiwan University of Science and Technology, Taiwan) Professor Chun-Hui Chung (National Taiwan University of Science and Technology, Taiwan) Professor Pin-Chuan Chen (National Taiwan University of Science and Technology, Taiwan) Dr Wen-En Fu (Center for Measurement Standards, ITRI, Taiwan)
-
Demolition and removal of radioactively contaminated concrete soil: Aerosol control and monitoring
DOE Office of Scientific and Technical Information (OSTI.GOV)
Newton, G.J.; Hoover, M.D.; Grace, A.C. III
1995-12-01
From 1963 to 1985, two concrete-lined ponds were used to reduce the volume of radioactive liquids from the Institute`s research programs. Following withdrawal of the {open_quotes}hot ponds{close_quotes} from active use, the residual sludges and plastic liners of the ponds were removed and shipped to a radioactive waste disposal site. From 1987 to 1994, the concrete structures remained undisturbed pending environmental restoration on the site. Restoration began in 1994 and was completed in 1995. Restoration involved mechanical breakup and removal of the concrete structures and removal of areas of contaminated soils from the site. This report describes the design and resultsmore » of the aerosol control and monitoring program that was conducted to ensure protection of workers and the environment during the restoration process. The aerosol control and monitoring strategy developed for remediation of the ITRI hot ponds was successful both in preventing dispersion of radioactive dusts and in demonstrating that exposures of workers and offsite releases were within statutory limits.« less
-
Benzene metabolite levels in blood and bone marrow of B6C3F{sub 1} mice after low-level exposure
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bechtold, W.E.; Strunk, M.R.; Thornton-Manning, J.R.
1995-12-01
Studies at the Inhalation Toxicology Research Institute (ITRI) have explored the species-specific uptake and metabolism of benzene. Results have shown that metabolism is dependent on both dose and route of administration. Of particular interest were shifts in the major metabolic pathways as a function of exposure concentration. In these studies, B6C3F{sub 1} mice were exposed to increasing levels of benzene by either gavage or inhalation. As benzene internal dose increased, the relative amounts of muconic acid and hydroquinone decreased. In contrast, the relative amount of catechol increased with increasing exposure. These results show that the relative levels of toxic metabolitesmore » are a function of exposure level. Based on these results and assuming a linear relationship between exposure concentration and levels of bone marrow metabolites, it would be difficult to detect an elevation of any phenolic metabolites above background after occupational exposures to the OSHA Permissible Exposure Limit of 1 ppm benzene.« less
-
Rangachari, P; Dellsperger, K C; Fallaw, D; Davis, I; Sumner, M; Ray, W; Fiedler, S; Nguyen, T; Rethemeyer, R
2018-04-01
In fall 2016, Augusta University received a two-year grant from AHRQ, to implement a Social Knowledge Networking (SKN) system for enabling its health system, AU-Health, to progress from "limited use" of EHR Medication Reconciliation (MedRec) Technology, to "meaningful use." Phase 1 sought to identify a comprehensive set of issues related to EHR MedRec encountered by practitioners at AU-Health. These efforts helped develop a Reporting Tool , which, along with a Discussion Tool , was incorporated into the AU-Health EHR, at the end of Phase 1. Phase 2 (currently underway), comprises a 52-week pilot of the EHR-integrated SKN system in outpatient and inpatient medicine units. The purpose of this paper is to describe the methods and results of Phase 1. Phase 1 utilized an exploratory mixed-method approach, involving two rounds of data collection. This included 15 individual interviews followed by a survey of 200 practitioners, i.e., physicians, nurses, and pharmacists, based in the outpatient and inpatient medicine service at AU Health. Thematic analysis of interviews identified 55 issue-items related to EHR MedRec under 9 issue-categories. The survey sought practitioners' importance-rating of all issue-items identified from interviews. A total of 127 (63%) survey responses were received. Factor analysis served to validate the following 6 of the 9 issue-categories, all of which, were rated "Important" or higher (on average), by over 70% of all respondents: 1) Care-Coordination (CCI); 2) Patient-Education (PEI); 3) Ownership-and-Accountability (OAI); 4) Processes-of-Care (PCI); 5) IT-Related (ITRI); and 6) Workforce-Training (WTI). Significance-testing of importance-rating by professional affiliation revealed no statistically significant differences for CCI and PEI; and some statistically significant differences for OAI, PCI, ITRI, and WTI. There were two key gleanings from the issues related to EHR MedRec unearthed by this study: 1) there was an absence of shared understanding among practitioners, of the value of EHR MedRec in promoting patient safety, which contributed to workarounds, and suboptimal use of the EHR MedRec system; and 2) there was a socio-technical dimension to many of the issues, creating an added layer of complexity. These gleanings in turn, provide insights into best practices for managing both clinical transitions-of-care in the EHR MedRec process; and socio-technical challenges encountered in EHR MedRec implementation.
-
Rangachari, P.; Dellsperger, K.C; Fallaw, D.; Davis, I.; Sumner, M.; Ray, W.; Fiedler, S.; Nguyen, T.; Rethemeyer, R.
2018-01-01
Background In fall 2016, Augusta University received a two-year grant from AHRQ, to implement a Social Knowledge Networking (SKN) system for enabling its health system, AU-Health, to progress from “limited use” of EHR Medication Reconciliation (MedRec) Technology, to “meaningful use.” Phase 1 sought to identify a comprehensive set of issues related to EHR MedRec encountered by practitioners at AU-Health. These efforts helped develop a Reporting Tool, which, along with a Discussion Tool, was incorporated into the AU-Health EHR, at the end of Phase 1. Phase 2 (currently underway), comprises a 52-week pilot of the EHR-integrated SKN system in outpatient and inpatient medicine units. The purpose of this paper is to describe the methods and results of Phase 1. Methods Phase 1 utilized an exploratory mixed-method approach, involving two rounds of data collection. This included 15 individual interviews followed by a survey of 200 practitioners, i.e., physicians, nurses, and pharmacists, based in the outpatient and inpatient medicine service at AU Health. Results Thematic analysis of interviews identified 55 issue-items related to EHR MedRec under 9 issue-categories. The survey sought practitioners’ importance-rating of all issue-items identified from interviews. A total of 127 (63%) survey responses were received. Factor analysis served to validate the following 6 of the 9 issue-categories, all of which, were rated “Important” or higher (on average), by over 70% of all respondents: 1) Care-Coordination (CCI); 2) Patient-Education (PEI); 3) Ownership-and-Accountability (OAI); 4) Processes-of-Care (PCI); 5) IT-Related (ITRI); and 6) Workforce-Training (WTI). Significance-testing of importance-rating by professional affiliation revealed no statistically significant differences for CCI and PEI; and some statistically significant differences for OAI, PCI, ITRI, and WTI. Conclusion There were two key gleanings from the issues related to EHR MedRec unearthed by this study: 1) there was an absence of shared understanding among practitioners, of the value of EHR MedRec in promoting patient safety, which contributed to workarounds, and suboptimal use of the EHR MedRec system; and 2) there was a socio-technical dimension to many of the issues, creating an added layer of complexity. These gleanings in turn, provide insights into best practices for managing both clinical transitions-of-care in the EHR MedRec process; and socio-technical challenges encountered in EHR MedRec implementation. PMID:29682132
-
Lessons learned from case studies of inhalation exposures of workers to radioactive aerosols
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hoover, M.D.; Fencl, A.F.; Newton, G.J.
1995-12-01
Various Department of Energy requirements, rules, and orders mandate that lessons learned be identified, evaluated, shared, and incorporated into current practices. The recently issued, nonmandatory DOE standard for Development of DOE Lessons Learned Program states that a DOE-wide lessons learned program will {open_quotes}help to prevent recurrences of negative experiences, highlight best practices, and spotlight innovative ways to solve problems or perform work more safely, efficiently, and cost effectively.{close_quotes} Additional information about the lessons learned program is contained in the recently issued DOE handbook on Implementing U.S. Department of Energy Lessons Learned Programs and in October 1995 DOE SAfety Notice onmore » Lessons Learned Programs. This report summarizes work in progress at ITRI to identify lessons learned for worker exposures to radioactive aerosols, and describes how this work will be incorporated into the DOE lessons learned program, including a new technical guide for measuring, modeling, and mitigating airborne radioactive particles. Follow-on work is focusing on preparation of {open_quotes}lessons learned{close_quotes} training materials for facility designers, managers, health protection professionals, line supervisors, and workers.« less
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Samet, J.; Gilliland, F.D.
This project incorporates two related research projects directed toward understanding respiratory carcinogenesis in radon-exposed former uranium miners. The first project involved a continuation of the tissue resource of lung cancer cases from former underground uranium miners and comparison cases from non-miners. The second project was a pilot study for a proposed longitudinal study of respiratory carcinogenesis in former uranium miners. The objectives including facilitating the investigation of molecular changes in radon exposed lung cancer cases, developing methods for prospectively studying clinical, cytologic, cytogenetic, and molecular changes in the multi-event process of respiratory carcinogenesis, and assessing the feasibility of recruiting formermore » uranium miners into a longitudinal study that collected multiple biological specimens. A pilot study was conducted to determine whether blood collection, induced sputum, bronchial brushing, washings, and mucosal biopsies from participants at two of the hospitals could be included efficiently. A questionnaire was developed for the extended study and all protocols for specimen collection and tissue handling were completed. Resource utilization is in progress at ITRI and the methods have been developed to study molecular and cellular changes in exfoliated cells contained in sputum as well as susceptibility factors.« less
-
Parameters optimization for the energy management system of hybrid electric vehicle
NASA Astrophysics Data System (ADS)
Tseng, Chyuan-Yow; Hung, Yi-Hsuan; Tsai, Chien-Hsiung; Huang, Yu-Jen
2007-12-01
Hybrid electric vehicle (HEV) has been widely studied recently due to its high potential in reduction of fuel consumption, exhaust emission, and lower noise. Because of comprised of two power sources, the HEV requires an energy management system (EMS) to distribute optimally the power sources for various driving conditions. The ITRI in Taiwan has developed a HEV consisted of a 2.2L internal combustion engine (ICE), a 18KW motor/generator (M/G), a 288V battery pack, and a continuous variable transmission (CVT). The task of the present study is to design an energy management strategy of the EMS for the HEV. Due to the nonlinear nature and the fact of unknown system model of the system, a kind of simplex method based energy management strategy is proposed for the HEV system. The simplex method is a kind of optimization strategy which is generally used to find out the optimal parameters for un-modeled systems. The way to apply the simplex method for the design of the EMS is presented. The feasibility of the proposed method was verified by perform numerical simulation on the FTP75 drive cycles.
-
Final report of the key comparison of APMP.AUV.V-K2
NASA Astrophysics Data System (ADS)
Usuda, Takashi; Ota, Akihiro; Nozato, Hideaki; Ishigami, Tamio; Kokuyama, Wataru; Plangsangmas, Virat; Rattanangkul, Pairoj; Yih Tsuei, Kuang; Huang, Yu-Chung; Chee Keong, Chan; Shan, Cui
2017-01-01
A key comparison of vibration acceleration APMP.AUV.V-K2, which is an upgrade from APMP.AUV.V-K1.1, has been made within the Asia Pacific Metrology Programme (APMP) to include three national laboratories; the CMS-ITRI (Chinese Taipei), the NIMT (Thailand) and the A*Star (Singapore). One pilot laboratory, the NMIJ (Japan), participated to link the RMO APMP results to the CIPM CC key comparison (CCAUV.V-K2), according to the decision of the CCAUV10/D7 during the 10th CCAUV meeting. The admissible acceleration amplitude ranges from 10 m/s2 to 200 m/s2 over the frequency range from 40 Hz to 5 kHz. The RMO APMP results demonstrate the agreement with the key comparison reference value of CCAUV.V-K2 within the expanded uncertainties considering the armature effect of vibration exciter in a high-frequency range. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCAUV, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).
-
Oil defect detection of electrowetting display
NASA Astrophysics Data System (ADS)
Chiang, Hou-Chi; Tsai, Yu-Hsiang; Yan, Yung-Jhe; Huang, Ting-Wei; Mang, Ou-Yang
2015-08-01
In recent years, transparent display is an emerging topic in display technologies. Apply in many fields just like mobile device, shopping or advertising window, and etc. Electrowetting Display (EWD) is one kind of potential transparent display technology advantages of high transmittance, fast response time, high contrast and rich color with pigment based oil system. In mass production process of Electrowetting Display, oil defects should be found by Automated Optical Inspection (AOI) detection system. It is useful in determination of panel defects for quality control. According to the research of our group, we proposed a mechanism of AOI detection system detecting the different kinds of oil defects. This mechanism can detect different kinds of oil defect caused by oil overflow or material deteriorated after oil coating or driving. We had experiment our mechanism with a 6-inch Electrowetting Display panel from ITRI, using an Epson V750 scanner with 1200 dpi resolution. Two AOI algorithms were developed, which were high speed method and high precision method. In high precision method, oil jumping or non-recovered can be detected successfully. This mechanism of AOI detection system can be used to evaluate the oil uniformity in EWD panel process. In the future, our AOI detection system can be used in quality control of panel manufacturing for mass production.
-
NASA Astrophysics Data System (ADS)
Yeh, C. H.; Chow, C. W.; Shih, F. Y.; Pan, C. L.
2012-08-01
The wavelength division multiplexing-time division multiplexing (WDM-TDM) passive optical network (PON) using reflective semiconductor optical amplifier (RSOA)-based colorless optical networking units (ONUs) is considered as a promising candidate for the realization of fiber-to-the-home (FTTH). And this architecture is actively considered by Industrial Technology Research Institute (ITRI) for the realization of FTTH in Taiwan. However, different fiber distances and optical components would introduce different power budgets to different ONUs in the PON. Besides, due to the aging of optical transmitter (Tx), the power decay of the distributed optical carrier from the central office (CO) could also reduce the injection power into each ONU. The situation will be more severe in the long-reach (LR) PON, which is considered as an option for the future access. In this work, we investigate a WDM-TDM PON using RSOA-based ONU for upstream data rate adjustment depending on different continuous wave (CW) injection powers. Both standard-reach (25 km) and LR (100 km) transmissions are evaluated. Moreover, a detail analysis of the upstream signal bit-error rate (BER) performances at different injection powers, upstream data rates, PON split-ratios under stand-reach and long-reach is presented.
-
CCM.FF-K3.2011: Final report for the CIPM key comparison of air speed, 0.5 m/s to 40 m/s
NASA Astrophysics Data System (ADS)
Müller, Harald; Caré, Isabelle; Lucas, Peter; Pachinger, Dietmar; Kurihara, Noboru; Lishui, Cui; Su, Chun-Min; Shinder, Iosif; Spazzini, Pier Giorgio
2017-01-01
The CCM.FF-K3.2011 comparison was organized for the purpose of determination of the degree of equivalence of the national standards for air speed over the range 0.5 m/s to 40 m/s. An ultrasonic anemometer and a Laser Doppler anemometer were used as transfer standards. Nine laboratories from three RMOs participated between July 2013 and July 2015—EURAMET: PTB, Germany; LNE-CETIAT, France; INRIM, Italy; VSL, The Netherlands; E+E, Austria; SIM: NIST, USA; APMP: NMIJ/AIST, Japan; NIM, China; CMS/ITRI, Chinese Taipei. The measurements were provided at ambient conditions. All results of independent participants were used in the determination of the key comparison reference value (KCRV) and the uncertainty of the KCRV. The reference value was determined at each air speed separately following `procedure A' presented by M G Cox. The degree of equivalence with the KCRV was calculated for each air speed and laboratory. Almost all reported results were consistent with the KCRV. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).
-
Final report on key comparison APMP.M.P-K13 in hydraulic gauge pressure from 50 MPa to 500 MPa
NASA Astrophysics Data System (ADS)
Kajikawa, Hiroaki; Kobata, Tokihiko; Yadav, Sanjay; Jian, Wu; Changpan, Tawat; Owen, Neville; Yanhua, Li; Hung, Chen-Chuan; Ginanjar, Gigin; Choi, In-Mook
2015-01-01
This report describes the results of a key comparison of hydraulic high-pressure standards at nine National Metrology Institutes (NMIs: NMIJ/AIST, NPLI, NMC/A*STAR, NIMT, NMIA, NIM, CMS/ITRI, KIM-LIPI, and KRISS) within the framework of the Asia-Pacific Metrology Programme (APMP) in order to determine their degrees of equivalence in the pressure range from 50 MPa to 500 MPa in gauge mode. The pilot institute was the National Metrology Institute of Japan (NMIJ/AIST). All participating institutes used hydraulic pressure balances as their pressure standards. A set of pressure balance with a free-deformational piston-cylinder assembly was used as the transfer standard. Three piston-cylinder assemblies, only one at a time, were used to complete the measurements in the period from November 2010 to January 2013. Ten participants completed their measurements and reported the pressure-dependent effective areas of the transfer standard at specified pressures with the associated uncertainties. Since one of the participants withdrew its results, the measurement results of the nine participants were finally compared. The results were linked to the CCM.P-K13 reference values through the results of two linking laboratories, NMIJ/AIST and NPLI. The degrees of equivalence were evaluated by the relative deviations of the participants' results from the CCM.P-K13 key comparison reference values, and their associated combined expanded (k=2) uncertainties. The results of all the nine participating NMIs agree with the CCM.P-K13 reference values within their expanded (k=2) uncertainties in the entire pressure range from 50 MPa to 500 MPa. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by CCM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).
-
NASA Astrophysics Data System (ADS)
Piro, Salvatore; Papale, Enrico; Zamuner, Daniela
2016-04-01
Geophysical methods are frequently used in archaeological prospection in order to provide detailed information about the presence of structures in the subsurface as well as their position and their geometrical reconstruction, by measuring variations of some physical properties. Often, due to the limited size and depth of an archaeological structure, it may be rather difficult to single out its position and extent because of the generally low signal-to-noise ratio. This problem can be overcome by improving data acquisition, processing techniques and by integrating different geophysical methods. In this work, two sites of archaeological interest, were investigated employing several methods (Ground Penetrating Radar (GPR), Electrical Resistivity Tomography (ERT), Fluxgate Differential Magnetic) to obtain precise and detailed maps of subsurface bodies. The first site, situated in a suburban area between Itri and Fondi, in the Aurunci Natural Regional Park (Central Italy), is characterized by the presence of remains of past human activity dating from the third century B.C. The second site, is instead situated in an urban area in the city of Rome (Basilica di Santa Balbina), where historical evidence is also present. The methods employed, allowed to determine the position and the geometry of some structures in the subsurface related to this past human activity. To have a better understanding of the subsurface, we then performed a qualitative and quantitative integration of this data, which consists in fusing the data from all the methods used, to have a complete visualization of the investigated area. Qualitative integration consists in graphically overlaying the maps obtained by the single methods; this method yields only images, not new data that may be subsequently analyzed. Quantitative integration is instead performed by mathematical and statistical solutions, which allows to have a more accurate reconstruction of the subsurface and generates new data with high information content.
-
Nelson, S. M.; Mueller, G.; Hemphill, D. C.
1994-01-01
Cover is an important component of aquatic habitat and fisheries management. Fisheries biologists often try to improve habitats through the addition of natural and artificial material to improve cover diversity and complexity. Habitat-improvement programs range from submerging used Christmas trees to more complex programs using sophisticated artificial habitat modules. Used automobile tires have been employed in the large scale construction of reefs and fish attractors in marine environments (D'Itri 1985) and to a lesser extent in freshwater (Johnson and Stein 1979) and have been recognized as a durable, inexpensive and long-lasting material which benefits fishery communities. Recent studies by the U.S. Bureau of Reclamation (Mueller and Liston 1991) have quantified the importance of tire reeds to enhancing freshwater canal fisheries in the southwestern United States. These studies have demonstrated that fisheries and aquatic macroinvertebrates are attracted to these structures, increasing species diversity, densities and biomass where reefs are places in canals. Potential benefits to fishermen are great in the form of recreational fishing. However, the use of tire reefs in aquatic environments which have relatively small volumes compared to marine or reservoir environments has raised water quality concerns. Effects of tires on water quality have not typically been studied in the part because of the obvious presence of fishes and other aquatic organisms that make use of tire reefs; the implication being that tires are intert and non-toxic. Little information on effects of tires on water quality is contained in the literature. Stone et al. (1975) demonstrated that tire exposure had no detrimental effects on two species of marine fish while results of Kellough's (1991) freshwater tests were inconclusive, but suggested that some factor in tire leachate was toxic to rainbow trout (Oncorhynchus mykiss). Nozaka et al. (1973) found no harmful substances leached from tire material soaked in fresh water. Because there are few data on toxicity associated with tires, this became the focus of our study. Toxicity Identification Evaluation (TUE) procedures developed by the EPA (1991) were used to evaluate water quality impacted by tires.
-
Numerical reconstruction of tsunami source using combined seismic, satellite and DART data
NASA Astrophysics Data System (ADS)
Krivorotko, Olga; Kabanikhin, Sergey; Marinin, Igor
2014-05-01
Recent tsunamis, for instance, in Japan (2011), in Sumatra (2004), and at the Indian coast (2004) showed that a system of producing exact and timely information about tsunamis is of a vital importance. Numerical simulation is an effective instrument for providing such information. Bottom relief characteristics and the initial perturbation data (a tsunami source) are required for the direct simulation of tsunamis. The seismic data about the source are usually obtained in a few tens of minutes after an event has occurred (the seismic waves velocity being about five hundred kilometres per minute, while the velocity of tsunami waves is less than twelve kilometres per minute). A difference in the arrival times of seismic and tsunami waves can be used when operationally refining the tsunami source parameters and modelling expected tsunami wave height on the shore. The most suitable physical models related to the tsunamis simulation are based on the shallow water equations. The problem of identification parameters of a tsunami source using additional measurements of a passing wave is called inverse tsunami problem. We investigate three different inverse problems of determining a tsunami source using three different additional data: Deep-ocean Assessment and Reporting of Tsunamis (DART) measurements, satellite wave-form images and seismic data. These problems are severely ill-posed. We apply regularization techniques to control the degree of ill-posedness such as Fourier expansion, truncated singular value decomposition, numerical regularization. The algorithm of selecting the truncated number of singular values of an inverse problem operator which is agreed with the error level in measured data is described and analyzed. In numerical experiment we used gradient methods (Landweber iteration and conjugate gradient method) for solving inverse tsunami problems. Gradient methods are based on minimizing the corresponding misfit function. To calculate the gradient of the misfit function, the adjoint problem is solved. The conservative finite-difference schemes for solving the direct and adjoint problems in the approximation of shallow water are constructed. Results of numerical experiments of the tsunami source reconstruction are presented and discussed. We show that using a combination of three different types of data allows one to increase the stability and efficiency of tsunami source reconstruction. Non-profit organization WAPMERR (World Agency of Planetary Monitoring and Earthquake Risk Reduction) in collaboration with Informap software development department developed the Integrated Tsunami Research and Information System (ITRIS) to simulate tsunami waves and earthquakes, river course changes, coastal zone floods, and risk estimates for coastal constructions at wave run-ups and earthquakes. The special scientific plug-in components are embedded in a specially developed GIS-type graphic shell for easy data retrieval, visualization and processing. This work was supported by the Russian Foundation for Basic Research (project No. 12-01-00773 'Theory and Numerical Methods for Solving Combined Inverse Problems of Mathematical Physics') and interdisciplinary project of SB RAS 14 'Inverse Problems and Applications: Theory, Algorithms, Software'.
-
NASA Astrophysics Data System (ADS)
Piro, Salvatore; Papale, Enrico; Kucukdemirci, Melda; Zamuner, Daniela
2017-04-01
Non-destructive ground surface geophysical prospecting methods are frequently used for the investigation of archaeological sites, where a detailed physical and geometrical reconstructions of hidden volumes is required prior to any excavation work. All methods measure the variations of single physical parameters, therefore if these are used singularly, they could not permit a complete location and characterization of anomalous bodies. The probability of a successful result rapidly increases if a multhimethodological approach is adopted, according to the logic of objective complementarity of information and of global convergence toward a high quality multiparametric imaging of the buried structures. The representation of the static configuration of the bodies in the subsoil and of the space-time evolution of the interaction processes between targets and hosting materials have to be actually considered fundamental elements of primary knowledge in archaeological prospecting. The main effort in geophysical prospecting for archaeology is therefore the integration of different, absolutely non-invasive techniques, especially if managed in view of a ultra-high resolution three-dimensional (3D) tomographic representation mode. Following the above outlined approach, we have integrated geophysical methods which measure the variations of potential field (gradiometric methods) with active methods which measure the variations of physical properties due to the body's geometry and volume (GPR and ERT). In this work, the results obtained during the surveys of three archaeological sites, employing Ground Penetrating Radar (GPR), Electrical Resistivity Tomography (ERT) and Fluxgate Differential Magnetic (FDM) to obtain precise and detailed maps of subsurface bodies, are presented and discussed. The first site, situated in a suburban area between Itri and Fondi, in the Aurunci Natural Regional Park (Central Italy), is characterized by the presence of remains of past human activity dating from the third century B.C. The second site is always in suburban area and is part of the ancient acropolis Etruscan town of Cerveteri (central Italy). The third site is part of Aizanoi archaeological park (Cavdarhisar, Kutahya, Turkey). To have a better understanding of the subsurface, we performed a different integrated approaches of these data, which consists in fusing the data from all the employed methods, to have a complete visualization of the investigated area. For the processing we have used the following techniques: graphical integration (overlay and RGB colour composite), discrete data analysis (binary data analysis and cluster analysis) and continuous data analysis (data sum, product, max, min and PCA). Ernenwein, E.G. 2009. Integration of multidimensional archaeogeophysical data using supervised and unsupervised classification. Near surface geophysics. Vol 7: 147-158. DOI:10.3997/1873-0604.2009004 Kucukdemirci,M., Piro.S.,Baydemir,N.,Ozer.,E. Zamuner.,D. 2015. Mathematical and Statistical Integration approach on archaeological prospection data,case studies from Aizanoi-Turkey. 43rd Computer Applications and Quantitative Methods in Archaeology, Siena. Kvamme,K.,2007. Integrating Multiple Geophysical Datasets, Remote Sensing in archaeology, Springer,Boston. Piro,S.,Mauriello.,P. and Cammarano.,F.2000. Quantitative Integration of Geophysical methods for Archaeological Prospection. Archaeological prospection 7(4): 203-213. Piro S., Papale E., Zamuner D., 2016. Different integrated geophysical approaches to investigate archaeological sites in urban and suburban area. Geophysical Research Abstracts Vol. 18, EGU2016.
-
NASA Astrophysics Data System (ADS)
Krivorot'ko, Olga; Kabanikhin, Sergey; Marinin, Igor; Karas, Adel; Khidasheli, David
2013-04-01
One of the most important problems of tsunami investigation is the problem of seismic tsunami source reconstruction. Non-profit organization WAPMERR (http://wapmerr.org) has provided a historical database of alleged tsunami sources around the world that obtained with the help of information about seaquakes. WAPMERR also has a database of observations of the tsunami waves in coastal areas. The main idea of presentation consists of determining of the tsunami source parameters using seismic data and observations of the tsunami waves on the shore, and the expansion and refinement of the database of presupposed tsunami sources for operative and accurate prediction of hazards and assessment of risks and consequences. Also we present 3D visualization of real-time tsunami wave propagation and loss assessment, characterizing the nature of the building stock in cities at risk, and monitoring by satellite images using modern GIS technology ITRIS (Integrated Tsunami Research and Information System) developed by WAPMERR and Informap Ltd. The special scientific plug-in components are embedded in a specially developed GIS-type graphic shell for easy data retrieval, visualization and processing. The most suitable physical models related to simulation of tsunamis are based on shallow water equations. We consider the initial-boundary value problem in Ω := {(x,y) ?R2 : x ?(0,Lx ), y ?(0,Ly ), Lx,Ly > 0} for the well-known linear shallow water equations in the Cartesian coordinate system in terms of the liquid flow components in dimensional form Here ?(x,y,t) defines the free water surface vertical displacement, i.e. amplitude of a tsunami wave, q(x,y) is the initial amplitude of a tsunami wave. The lateral boundary is assumed to be a non-reflecting boundary of the domain, that is, it allows the free passage of the propagating waves. Assume that the free surface oscillation data at points (xm, ym) are given as a measured output data from tsunami records: fm(t) := ? (xm, ym,t), (xm,ym ) ?Ω, t ?(Tm1, Tm2), m = 1,2,...,M, M ?N (2) The problem of tsunami source reconstruction (inverse tsunami problem) consists of determining the unknown initial perturbation q(x,y) of the free surface defied in (1) from knowledge of the free surface oscillation data fm(t) given by (2). We present a numerical method to determine the tsunami source using measurements of the height of a passing tsunami wave. Proposed approach based on the weak solution theory for hyperbolic PDEs and adjoint problem method for minimization of the corresponding cost functional 2 J(q) = ?Aq - F? , F = (f1,...,fM ). (3) The adjoint problem is defined to obtain an explicit gradient formula for the cost functional (3). Different numerical algorithms (finite-difference approach and finite volume method) are proposed for the direct as well as adjoint problem. Conjugate gradient algorithm based on explicit gradient formula is used for numerical solution of the inverse problem (1)-(2). This work was partially supported by the Russian Foundation for Basic Research (project No. 12-01-00773) and by SB RAS interdisciplinary project 14 "Inverse Problems and Applications: Theory, Algorithms, Software".
-
Mathematics of tsunami: modelling and identification
NASA Astrophysics Data System (ADS)
Krivorotko, Olga; Kabanikhin, Sergey
2015-04-01
Tsunami (long waves in the deep water) motion caused by underwater earthquakes is described by shallow water equations ( { ηtt = div (gH (x,y)-gradη), (x,y) ∈ Ω, t ∈ (0,T ); η|t=0 = q(x,y), ηt|t=0 = 0, (x,y) ∈ Ω. ( (1) Bottom relief H(x,y) characteristics and the initial perturbation data (a tsunami source q(x,y)) are required for the direct simulation of tsunamis. The main difficulty problem of tsunami modelling is a very big size of the computational domain (Ω = 500 × 1000 kilometres in space and about one hour computational time T for one meter of initial perturbation amplitude max|q|). The calculation of the function η(x,y,t) of three variables in Ω × (0,T) requires large computing resources. We construct a new algorithm to solve numerically the problem of determining the moving tsunami wave height S(x,y) which is based on kinematic-type approach and analytical representation of fundamental solution. Proposed algorithm of determining the function of two variables S(x,y) reduces the number of operations in 1.5 times than solving problem (1). If all functions does not depend on the variable y (one dimensional case), then the moving tsunami wave height satisfies of the well-known Airy-Green formula: S(x) = S(0)° --- 4H (0)/H (x). The problem of identification parameters of a tsunami source using additional measurements of a passing wave is called inverse tsunami problem. We investigate two different inverse problems of determining a tsunami source q(x,y) using two different additional data: Deep-ocean Assessment and Reporting of Tsunamis (DART) measurements and satellite altimeters wave-form images. These problems are severely ill-posed. The main idea consists of combination of two measured data to reconstruct the source parameters. We apply regularization techniques to control the degree of ill-posedness such as Fourier expansion, truncated singular value decomposition, numerical regularization. The algorithm of selecting the truncated number of singular values of an inverse problem operator which is agreed with the error level in measured data is described and analysed. In numerical experiment we used conjugate gradient method for solving inverse tsunami problems. Gradient methods are based on minimizing the corresponding misfit function. To calculate the gradient of the misfit function, the adjoint problem is solved. The conservative finite-difference schemes for solving the direct and adjoint problems in the approximation of shallow water are constructed. Results of numerical experiments of the tsunami source reconstruction are presented and discussed. We show that using a combination of two types of data allows one to increase the stability and efficiency of tsunami source reconstruction. Non-profit organization WAPMERR (World Agency of Planetary Monitoring and Earthquake Risk Reduction) in collaboration with Institute of Computational Mathematics and Mathematical Geophysics of SB RAS developed the Integrated Tsunami Research and Information System (ITRIS) to simulate tsunami waves and earthquakes, river course changes, coastal zone floods, and risk estimates for coastal constructions at wave run-ups and earthquakes. The special scientific plug-in components are embedded in a specially developed GIS-type graphic shell for easy data retrieval, visualization and processing. We demonstrate the tsunami simulation plug-in for historical tsunami events (2004 Indian Ocean tsunami, Simushir tsunami 2006 and others). This work was supported by the Ministry of Education and Science of the Russian Federation.