Sample records for jacketing strengthening

  1. Strengthening and repair of RC beams with sugarcane bagasse fiber reinforced cement mortar

    NASA Astrophysics Data System (ADS)

    Syamir Senin, Mohamad; Shahidan, Shahiron; Maarof, M. Z. Md; Syazani Leman, Alif; Zuki, S. S. Mohd; Azmi, M. A. Mohammad

    2017-11-01

    The use of a jacket made of fiber reinforced cement mortar with tensile hardening behaviour for strengthening RC beams was investigated in this study. A full-scale test was conducted on beams measuring 1000mm in length. A 25mm jacket was directly applied to the surface of the beams to test its ability to repair and strengthen the beams. The beams were initially damaged and eventually repaired. Three types of beams which included unrepaired beams, beams repaired with normal mortar jacket and beams repaired with 10% sugarcane bagasse fiber mortar jacket were studied. The jacket containing 10% of sugarcane bagasse fiber enhanced the flexural strength of the beams.

  2. Variable pressure thermal insulating jacket

    DOEpatents

    Nelson, Paul A.; Malecha, Richard F.; Chilenskas, Albert A.

    1994-01-01

    A device for controlled insulation of a thermal device. The device includes a thermal jacket with a closed volume able to be evacuated to form an insulating jacket around the thermal source. A getter material is in communcation with the closed volume of the thermal jacket. The getter material can absorb and desorb a control gas to control gas pressure in the volume of the thermal jacket to control thermal conductivity in the thermal jacket.

  3. Variable pressure thermal insulating jacket

    DOEpatents

    Nelson, P.A.; Malecha, R.F.; Chilenskas, A.A.

    1994-09-20

    A device for controlled insulation of a thermal device is disclosed. The device includes a thermal jacket with a closed volume able to be evacuated to form an insulating jacket around the thermal source. A getter material is in communication with the closed volume of the thermal jacket. The getter material can absorb and desorb a control gas to control gas pressure in the volume of the thermal jacket to control thermal conductivity in the thermal jacket. 10 figs.

  4. CUTTING AND WEDGING JACKET REMOVER

    DOEpatents

    Freedman, M.; Raynor, S.

    1959-04-01

    A tool is presented for stripping cladded jackets from fissionable fuel elements. The tool is a tube which fits closely around the jacket and which has two cutting edges at opposite sides of one end. These cutting edges are adjusted to penetrate only the jacket so that by moving the edges downward the jacket is cut into two pieces.

  5. CORROSION RESISTANT JACKETED METAL BODY

    DOEpatents

    Brugmann, E.W.

    1958-08-26

    Reactor faul elements of the elongated cylindrical type which are jacketed in a corrosion resistant material are described. Each feel element is comprised of a plurality of jacketed cylinders of fissionable material in end to end abutting relationship, the jackets being welded together at their adjoining ends to retain the individual segments together and seat the interior of the jackets.

  6. 46 CFR 180.71 - Life jackets.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Life jackets. 180.71 Section 180.71 Shipping COAST GUARD... EQUIPMENT AND ARRANGEMENTS Ring Life Buoys and Life Jackets § 180.71 Life jackets. (a) An adult life jacket... life jackets equal to at least 10% of the number of persons permitted on board must be provided, or...

  7. 46 CFR 180.71 - Life jackets.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Life jackets. 180.71 Section 180.71 Shipping COAST GUARD... EQUIPMENT AND ARRANGEMENTS Ring Life Buoys and Life Jackets § 180.71 Life jackets. (a) An adult life jacket... life jackets equal to at least 10% of the number of persons permitted on board must be provided, or...

  8. 46 CFR 180.71 - Life jackets.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Life jackets. 180.71 Section 180.71 Shipping COAST GUARD... EQUIPMENT AND ARRANGEMENTS Ring Life Buoys and Life Jackets § 180.71 Life jackets. (a) An adult life jacket... life jackets equal to at least 10% of the number of persons permitted on board must be provided, or...

  9. 46 CFR 180.71 - Life jackets.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Life jackets. 180.71 Section 180.71 Shipping COAST GUARD... EQUIPMENT AND ARRANGEMENTS Ring Life Buoys and Life Jackets § 180.71 Life jackets. (a) An adult life jacket... life jackets equal to at least 10% of the number of persons permitted on board must be provided, or...

  10. 46 CFR 180.71 - Life jackets.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Life jackets. 180.71 Section 180.71 Shipping COAST GUARD... EQUIPMENT AND ARRANGEMENTS Ring Life Buoys and Life Jackets § 180.71 Life jackets. (a) An adult life jacket... life jackets equal to at least 10% of the number of persons permitted on board must be provided, or...

  11. METHOD OF JACKETING A FISSIONABLE BODY

    DOEpatents

    Creutz, E.C.

    1960-02-16

    A method for jacketing fuel elements is described. A fissionablc body ts fitted into a steel jacket, and a steel rimmed closure disk is inserted into the open end of the jacket. The jacket is then drawn through a die, aind the rim of the disk is welded to the jacket to form an impervious seal.

  12. Regeneratively Cooled Porous Media Jacket

    NASA Technical Reports Server (NTRS)

    Mungas, Greg (Inventor); Fisher, David J. (Inventor); London, Adam Pollok (Inventor); Fryer, Jack Merrill (Inventor)

    2013-01-01

    The fluid and heat transfer theory for regenerative cooling of a rocket combustion chamber with a porous media coolant jacket is presented. This model is used to design a regeneratively cooled rocket or other high temperature engine cooling jacket. Cooling jackets comprising impermeable inner and outer walls, and porous media channels are disclosed. Also disclosed are porous media coolant jackets with additional structures designed to transfer heat directly from the inner wall to the outer wall, and structures designed to direct movement of the coolant fluid from the inner wall to the outer wall. Methods of making such jackets are also disclosed.

  13. 46 CFR 117.71 - Life jackets.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Life jackets. 117.71 Section 117.71 Shipping COAST GUARD... OVERNIGHT ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS LIFESAVING EQUIPMENT AND ARRANGEMENTS Ring Life Buoys and Life Jackets § 117.71 Life jackets. (a) An adult life jacket must be provided for each person...

  14. 46 CFR 117.71 - Life jackets.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Life jackets. 117.71 Section 117.71 Shipping COAST GUARD... OVERNIGHT ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS LIFESAVING EQUIPMENT AND ARRANGEMENTS Ring Life Buoys and Life Jackets § 117.71 Life jackets. (a) An adult life jacket must be provided for each person...

  15. 46 CFR 117.71 - Life jackets.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Life jackets. 117.71 Section 117.71 Shipping COAST GUARD... OVERNIGHT ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS LIFESAVING EQUIPMENT AND ARRANGEMENTS Ring Life Buoys and Life Jackets § 117.71 Life jackets. (a) An adult life jacket must be provided for each person...

  16. 46 CFR 117.71 - Life jackets.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Life jackets. 117.71 Section 117.71 Shipping COAST GUARD... OVERNIGHT ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS LIFESAVING EQUIPMENT AND ARRANGEMENTS Ring Life Buoys and Life Jackets § 117.71 Life jackets. (a) An adult life jacket must be provided for each person...

  17. 46 CFR 117.71 - Life jackets.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Life jackets. 117.71 Section 117.71 Shipping COAST GUARD... OVERNIGHT ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS LIFESAVING EQUIPMENT AND ARRANGEMENTS Ring Life Buoys and Life Jackets § 117.71 Life jackets. (a) An adult life jacket must be provided for each person...

  18. Strengthening method of concrete structure

    NASA Astrophysics Data System (ADS)

    Inge, Wewin; Audrey; Nugroho, Sofie; Njo, Helen

    2018-03-01

    Building extension in Indonesia is not favored, and not many people know the advantages of the method because architects and engineers tend to lack the knowledge and experience. The aim of this paper is to explain a method on how to strengthen a concrete building structure that people can use/learn as a better way to cut potential cost and save time. The strengthening method explained in this paper is steel jacketing, providing a case study of this method in the extension of a restaurant located in Medan, Indonesia. In this study, engineers calculated that the tensile stress of the existing RC column and beam is not strong enough to reinforce the building extension applied load. Therefore, the steel jacketing method can be applied to improve the column and beam strength and ductility. The result of the case study proves that this is one of the best methods for building extension applied in Indonesia.

  19. JACKETED URANIUM SLUG

    DOEpatents

    Ohlinger, L.A.; Cooper, C.M.

    1958-10-01

    Fuel elements for nuclear reactors are described. Eacb fuel element is comprised of a solid cylindrical slug containing fissionable material enclosed within a fluid tight jacket of neutron permeable material such as aluminum. The jacket is provided with a flexible end cap and with a sealing member having a substantially fluid-tight fit within the jacket in tight abutment with the end cap and the end of the slug. A fluid passage is provided between the end of the slug and the cap whereby leakage fiuid is principally directed to the end of the slug. In this manner, any reaction between the fissionable material and fiuid which may take place occurs more rapidly at the end of the slug than along the sides between the slug and the jacket, thereby causing longitudinal expansion of the fuel element prior to radial expansion. The longitudinal expansion can be readily detected and the fuel element removed from the coolant tube before radial expansion causes it to become jammed in the tube.

  20. WELDED JACKETED URANIUM BODY

    DOEpatents

    Gurinsky, D.H.

    1958-08-26

    A fuel element is presented for a neutronic reactor and is comprised of a uranium body, a non-fissionable jacket surrounding sald body, thu jacket including a portion sealed by a weld, and an inclusion in said sealed jacket at said weld of a fiux having a low neutron capture cross-section. The flux is provided by combining chlorine gas and hydrogen in the intense heat of-the arc, in a "Heliarc" welding muthod, to form dry hydrochloric acid gas.

  1. 46 CFR 180.75 - Life jacket lights.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Life jacket lights. 180.75 Section 180.75 Shipping COAST...) LIFESAVING EQUIPMENT AND ARRANGEMENTS Ring Life Buoys and Life Jackets § 180.75 Life jacket lights. (a) Each life jacket carried on a vessel on oceans, coastwise, or Great Lakes route, must have a life jacket...

  2. 46 CFR 117.75 - Life jacket lights.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Life jacket lights. 117.75 Section 117.75 Shipping COAST... Ring Life Buoys and Life Jackets § 117.75 Life jacket lights. (a) Each life jacket carried on a vessel on an oceans, coastwise, or Great Lakes route, must have a life jacket light approved in accordance...

  3. 46 CFR 180.75 - Life jacket lights.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Life jacket lights. 180.75 Section 180.75 Shipping COAST...) LIFESAVING EQUIPMENT AND ARRANGEMENTS Ring Life Buoys and Life Jackets § 180.75 Life jacket lights. (a) Each life jacket carried on a vessel on oceans, coastwise, or Great Lakes route, must have a life jacket...

  4. 46 CFR 117.75 - Life jacket lights.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Life jacket lights. 117.75 Section 117.75 Shipping COAST... Ring Life Buoys and Life Jackets § 117.75 Life jacket lights. (a) Each life jacket carried on a vessel on an oceans, coastwise, or Great Lakes route, must have a life jacket light approved in accordance...

  5. 46 CFR 117.75 - Life jacket lights.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Life jacket lights. 117.75 Section 117.75 Shipping COAST... Ring Life Buoys and Life Jackets § 117.75 Life jacket lights. (a) Each life jacket carried on a vessel on an oceans, coastwise, or Great Lakes route, must have a life jacket light approved in accordance...

  6. 46 CFR 117.75 - Life jacket lights.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Life jacket lights. 117.75 Section 117.75 Shipping COAST... Ring Life Buoys and Life Jackets § 117.75 Life jacket lights. (a) Each life jacket carried on a vessel on an oceans, coastwise, or Great Lakes route, must have a life jacket light approved in accordance...

  7. 46 CFR 117.75 - Life jacket lights.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Life jacket lights. 117.75 Section 117.75 Shipping COAST... Ring Life Buoys and Life Jackets § 117.75 Life jacket lights. (a) Each life jacket carried on a vessel on an oceans, coastwise, or Great Lakes route, must have a life jacket light approved in accordance...

  8. CORROSION RESISTANT JACKETED METAL BODY

    DOEpatents

    Brugmann, E.W.

    1958-08-26

    Jacketed metal bodies of the type used as fuel elements for nuclear reactors, which contain an internal elongated body of fissionable material jacketed in a corrosion resistant metal are described. The ends of the internal bodies are provided with screw threads having a tapered outer end. The jacket material overlaps the ends and extends into the tapered section of the screw threaded opening. Screw caps with a mating tapered section are screwed into the ends of the body to compress the jacket material in the tapered sections to provtde an effective seal against corrosive gases and liquids.

  9. Plating Patches On Heat-Exchanger Jackets

    NASA Technical Reports Server (NTRS)

    Loureiro, Henry; Kubik, Frank

    1989-01-01

    Permanent repairs made without welding. Technique used to repair nickel-alloy nozzle jacket of Space Shuttle main engine. Applicable to other metal heat-exchanger jackets with similar configurations. Does not require welding, brazing, soldering, or other operations involving high temperatures and consequent damage to surrounding areas. Portion of jacket around damaged area removed by grinding and polishing out to edges adjacent to tube/jacket braze bonds. Spaces between tubes filled with wax preventing contamination of spaces during subsequent plating.

  10. Postexercise Cooling Rates in 2 Cooling Jackets

    PubMed Central

    Brade, Carly; Dawson, Brian; Wallman, Karen; Polglaze, Ted

    2010-01-01

    Abstract Context: Cooling jackets are a common method for removing stored heat accumulated during exercise. To date, the efficiency and practicality of different types of cooling jackets have received minimal investigation. Objective: To examine whether a cooling jacket containing a phase-change material (PC17) results in more rapid postexercise cooling than a gel cooling jacket and a no-jacket (control) condition. Design: Randomized, counterbalanced design with 3 experimental conditions. Setting: Participants exercised at 75% V̇o2max workload in a hot climate chamber (temperature  =  35.0 ± 1.4°C, relative humidity  =  52 ± 4%) for 30 minutes, followed by postexercise cooling for 30 minutes in cool laboratory conditions (ambient temperature  =  24.9 ± 1.8°C, relative humidity  =  39% ± 10%). Patients or Other Participants: Twelve physically active men (age  =  21.3 ± 1.1 years, height  =  182.7 ± 7.1 cm, body mass  =  76.2 ± 9.5 kg, sum of 6 skinfolds  =  50.5 ± 6.9 mm, body surface area  =  1.98 ± 0.14 m2, V̇o2max  =  49.0 ± 7.0 mL·kg−1·min−1) participated. Intervention(s): Three experimental conditions, consisting of a PC17 jacket, a gel jacket, and no jacket. Main Outcome Measure(s): Core temperature (TC), mean skin temperature (TSk), and TC cooling rate (°C/min). Results: Mean peak TC postexercise was 38.49 ± 0.42°C, 38.57 ± 0.41°C, and 38.55 ± 0.40°C for the PC17 jacket, gel jacket, and control conditions, respectively. No differences were observed in peak TC cooling rates among the PC17 jacket (0.038 ± 0.007°C/min), gel jacket (0.040 ± 0.009°C/min), and control (0.034 ± 0.010°C/min, P > .05) conditions. Between trials, no differences were calculated for mean TSk cooling. Conclusions: Similar cooling rates for all 3 conditions indicate that there is no benefit associated with wearing the PC17 or gel jacket. PMID:20210620

  11. CORROSION RESISTANT JACKETED METAL BODY

    DOEpatents

    Brugmann, E.W.

    1958-08-26

    S>Metal jacketed metallic bodies of the type used as feel elements fer nuclear reactors are presented. The fuel element is comprised of a plurality of jacketed cylindrical bodies joined in end to end abutting relationship. The abutting ends of the internal fissionable bodies are provided with a mating screw and thread means for joining the two together. The jacket material is of a corrosion resistant metal and overlaps the abutting ends of the internal bodies, thereby effectively sealing these bodies from contact with exteral reactive gases and liquids.

  12. Fire Protection Jacket

    NASA Technical Reports Server (NTRS)

    1991-01-01

    NERAC, Inc., Tolland, CT, aided Paul Monroe Engineering, Orange, CA, in the development of their PC1200 Series Fire Protection Jacket that protects the oil conduit system on an offshore drilling platform from the intense hydrocarbon fires that cause buckling and could cause structural failure of the platform. The flame-proof jacketing, which can withstand temperatures of 2000 degrees Fahrenheit for four hours or more, was developed from a combination of ceramic cloth (similar to the ceramic in Space Shuttle tiles), and laminates used in space suits.

  13. 46 CFR 117.78 - Stowage of life jackets.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Stowage of life jackets. 117.78 Section 117.78 Shipping... Ring Life Buoys and Life Jackets § 117.78 Stowage of life jackets. (a) General. Unless otherwise stated in this section, life jackets must be stored in convenient places distributed throughout...

  14. 46 CFR 117.78 - Stowage of life jackets.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Stowage of life jackets. 117.78 Section 117.78 Shipping... Ring Life Buoys and Life Jackets § 117.78 Stowage of life jackets. (a) General. Unless otherwise stated in this section, life jackets must be stored in convenient places distributed throughout...

  15. 46 CFR 117.78 - Stowage of life jackets.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Stowage of life jackets. 117.78 Section 117.78 Shipping... Ring Life Buoys and Life Jackets § 117.78 Stowage of life jackets. (a) General. Unless otherwise stated in this section, life jackets must be stored in convenient places distributed throughout...

  16. 46 CFR 117.78 - Stowage of life jackets.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Stowage of life jackets. 117.78 Section 117.78 Shipping... Ring Life Buoys and Life Jackets § 117.78 Stowage of life jackets. (a) General. Unless otherwise stated in this section, life jackets must be stored in convenient places distributed throughout...

  17. 46 CFR 117.78 - Stowage of life jackets.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Stowage of life jackets. 117.78 Section 117.78 Shipping... Ring Life Buoys and Life Jackets § 117.78 Stowage of life jackets. (a) General. Unless otherwise stated in this section, life jackets must be stored in convenient places distributed throughout...

  18. 46 CFR 180.78 - Stowage of life jackets.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Stowage of life jackets. 180.78 Section 180.78 Shipping...) LIFESAVING EQUIPMENT AND ARRANGEMENTS Ring Life Buoys and Life Jackets § 180.78 Stowage of life jackets. (a) General. Unless otherwise stated in this section, life jackets must be stored in convenient places...

  19. 46 CFR 180.78 - Stowage of life jackets.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Stowage of life jackets. 180.78 Section 180.78 Shipping...) LIFESAVING EQUIPMENT AND ARRANGEMENTS Ring Life Buoys and Life Jackets § 180.78 Stowage of life jackets. (a) General. Unless otherwise stated in this section, life jackets must be stored in convenient places...

  20. 46 CFR 180.78 - Stowage of life jackets.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Stowage of life jackets. 180.78 Section 180.78 Shipping...) LIFESAVING EQUIPMENT AND ARRANGEMENTS Ring Life Buoys and Life Jackets § 180.78 Stowage of life jackets. (a) General. Unless otherwise stated in this section, life jackets must be stored in convenient places...

  1. 46 CFR 180.78 - Stowage of life jackets.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Stowage of life jackets. 180.78 Section 180.78 Shipping...) LIFESAVING EQUIPMENT AND ARRANGEMENTS Ring Life Buoys and Life Jackets § 180.78 Stowage of life jackets. (a) General. Unless otherwise stated in this section, life jackets must be stored in convenient places...

  2. 46 CFR 180.78 - Stowage of life jackets.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Stowage of life jackets. 180.78 Section 180.78 Shipping...) LIFESAVING EQUIPMENT AND ARRANGEMENTS Ring Life Buoys and Life Jackets § 180.78 Stowage of life jackets. (a) General. Unless otherwise stated in this section, life jackets must be stored in convenient places...

  3. An experimentally based analytical model for the shear capacity of FRP-strengthened reinforced concrete beams

    NASA Astrophysics Data System (ADS)

    Pellegrino, C.; Modena, C.

    2008-05-01

    This paper deals with the shear strengthening of Reinforced Concrete (RC) flexural members with externally bonded Fiber-Reinforced Polymers (FRPs). The interaction between an external FRP and an internal transverse steel reinforcement is not considered in actual code recommendations, but it strongly influences the efficiency of the shear strengthening rehabilitation technique and, as a consequence, the computation of interacting contributions to the nominal shear strength of beams. This circumstance is also discussed on the basis of the results of an experimental investigation of rectangular RC beams strengthened in shear with "U-jacketed" carbon FRP sheets. Based on experimental results of the present and other investigations, a new analytical model for describing the shear capacity of RC beams strengthened according to the most common schemes (side-bonded and "U-jacketed"), taking into account the interaction between steel and FRP shear strength contributions, is proposed.

  4. 46 CFR 185.516 - Life jacket placards.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Life jacket placards. 185.516 Section 185.516 Shipping...) OPERATIONS Preparations for Emergencies § 185.516 Life jacket placards. (a) Placards containing instructions for the donning and use of the life jackets aboard the vessel must be posted in conspicuous places...

  5. 46 CFR 185.516 - Life jacket placards.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Life jacket placards. 185.516 Section 185.516 Shipping...) OPERATIONS Preparations for Emergencies § 185.516 Life jacket placards. (a) Placards containing instructions for the donning and use of the life jackets aboard the vessel must be posted in conspicuous places...

  6. 46 CFR 185.516 - Life jacket placards.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Life jacket placards. 185.516 Section 185.516 Shipping...) OPERATIONS Preparations for Emergencies § 185.516 Life jacket placards. (a) Placards containing instructions for the donning and use of the life jackets aboard the vessel must be posted in conspicuous places...

  7. 46 CFR 185.516 - Life jacket placards.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Life jacket placards. 185.516 Section 185.516 Shipping...) OPERATIONS Preparations for Emergencies § 185.516 Life jacket placards. (a) Placards containing instructions for the donning and use of the life jackets aboard the vessel must be posted in conspicuous places...

  8. 46 CFR 185.516 - Life jacket placards.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Life jacket placards. 185.516 Section 185.516 Shipping...) OPERATIONS Preparations for Emergencies § 185.516 Life jacket placards. (a) Placards containing instructions for the donning and use of the life jackets aboard the vessel must be posted in conspicuous places...

  9. 46 CFR 122.516 - Life jacket placards.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Life jacket placards. 122.516 Section 122.516 Shipping... Emergencies § 122.516 Life jacket placards. (a) Placards containing instructions for the donning and use of the life jackets aboard the vessel must be posted in conspicuous places that are regularly accessible...

  10. 46 CFR 122.516 - Life jacket placards.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Life jacket placards. 122.516 Section 122.516 Shipping... Emergencies § 122.516 Life jacket placards. (a) Placards containing instructions for the donning and use of the life jackets aboard the vessel must be posted in conspicuous places that are regularly accessible...

  11. 46 CFR 122.516 - Life jacket placards.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Life jacket placards. 122.516 Section 122.516 Shipping... Emergencies § 122.516 Life jacket placards. (a) Placards containing instructions for the donning and use of the life jackets aboard the vessel must be posted in conspicuous places that are regularly accessible...

  12. 46 CFR 122.516 - Life jacket placards.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Life jacket placards. 122.516 Section 122.516 Shipping... Emergencies § 122.516 Life jacket placards. (a) Placards containing instructions for the donning and use of the life jackets aboard the vessel must be posted in conspicuous places that are regularly accessible...

  13. 46 CFR 122.516 - Life jacket placards.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Life jacket placards. 122.516 Section 122.516 Shipping... Emergencies § 122.516 Life jacket placards. (a) Placards containing instructions for the donning and use of the life jackets aboard the vessel must be posted in conspicuous places that are regularly accessible...

  14. JACKETED FISSIONABLE MEMBER

    DOEpatents

    Boller, E.R.; Robinson, J.W.

    1960-09-13

    A fuel element design for a nuclear reactor is presented. The fuel element comprises a cylindrical fuel body having a portion of smaller diameter at each end thereof with an annular flange at the extreme ends of these portions of smaller diameter. An end cap fits over the ends of the fuel body and has an internal annular groove adapted to receive the flange. The fuel body and end caps are disposed in a cup-shaped jacket, a closure disc completing the enclosure of the fuel body, and tht caps are bonded over their entire periphery to the jacket.

  15. 46 CFR 180.75 - Life jacket lights.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Life jacket lights. 180.75 Section 180.75 Shipping COAST...) LIFESAVING EQUIPMENT AND ARRANGEMENTS Ring Life Buoys and Life Jackets § 180.75 Life jacket lights. (a) Each... light approved in accordance with § 161.012 in subchapter Q of this chapter, or other standard specified...

  16. 46 CFR 180.75 - Life jacket lights.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Life jacket lights. 180.75 Section 180.75 Shipping COAST...) LIFESAVING EQUIPMENT AND ARRANGEMENTS Ring Life Buoys and Life Jackets § 180.75 Life jacket lights. (a) Each... light approved in accordance with § 161.012 in subchapter Q of this chapter, or other standard specified...

  17. 46 CFR 180.75 - Life jacket lights.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Life jacket lights. 180.75 Section 180.75 Shipping COAST...) LIFESAVING EQUIPMENT AND ARRANGEMENTS Ring Life Buoys and Life Jackets § 180.75 Life jacket lights. (a) Each... light approved in accordance with § 161.012 in subchapter Q of this chapter, or other standard specified...

  18. Water jacket for solid particle solar receiver

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wasyluk, David T.

    A solar receiver includes: water jacket panels each having a light-receiving side and a back side with a watertight sealed plenum defined in-between; light apertures passing through the watertight sealed plenums to receive light from the light-receiving sides of the water jacket panels; a heat transfer medium gap defined between the back sides of the water jacket panels and a cylindrical back plate; and light channeling tubes optically coupled with the light apertures and extending into the heat transfer medium gap. In some embodiments ends of the light apertures at the light receiving side of the water jacket panel aremore » welded together to define at least a portion of the light-receiving side. A cylindrical solar receiver may be constructed using a plurality of such water jacket panels arranged with their light-receiving sides facing outward.« less

  19. Jacketed lamp bulb envelope

    DOEpatents

    MacLennan, Donald A.; Turner, Brian P.; Gitsevich, Aleksandr; Bass, Gary K.; Dolan, James T.; Kipling, Kent; Kirkpatrick, Douglas A.; Leng, Yongzhang; Levin, Izrail; Roy, Robert J.; Shanks, Bruce; Smith, Malcolm; Trimble, William C.; Tsai, Peter

    2001-01-01

    A jacketed lamp bulb envelope includes a ceramic cup having an open end and a partially closed end, the partially closed end defining an aperture, a lamp bulb positioned inside the ceramic cup abutting the aperture, and a reflective ceramic material at least partially covering a portion of the bulb not abutting the aperture. The reflective ceramic material may substantially fill an interior volume of the ceramic cup not occupied by the bulb. The ceramic cup may include a structural feature for aiding in alignment of the jacketed lamp bulb envelope in a lamp. The ceramic cup may include an external flange about a periphery thereof. One example of a jacketed lamp bulb envelope includes a ceramic cup having an open end and a closed end, a ceramic washer covering the open end of the ceramic cup, the washer defining an aperture therethrough, a lamp bulb positioned inside the ceramic cup abutting the aperture, and a reflective ceramic material filling an interior volume of the ceramic cup not occupied by the bulb. A method of packing a jacketed lamp bulb envelope of the type comprising a ceramic cup with a lamp bulb disposed therein includes the steps of filling the ceramic cup with a flowable slurry of reflective material, and applying centrifugal force to the cup to pack the reflective material therein.

  20. Ported jacket for use in deformation measurement apparatus

    DOEpatents

    Wagner, L.A.; Senseny, P.E.; Mellegard, K.D.; Olsberg, S.B.

    1990-03-06

    A device for allowing deformation measurement of a jacketed specimen when the specimen is loaded includes an elastomeric specimen container or jacket surrounding a specimen while the specimen is being loaded by a test apparatus. The specimen jacket wall is compressible, and the wall follows and allows deformation of the specimen. The jacket wall of compressible material is provided with at least one opening and a thin layer or shim of substantially non-compressible (metal) material which covers and seals this opening. An extensometer is then positioned with its specimen engaging contact members engaging the substantially non-compressible material to measure the deformation of the specimen when the specimen is loaded, without compressibility effects of the jacket. 9 figs.

  1. 46 CFR 185.508 - Wearing of life jackets.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Wearing of life jackets. 185.508 Section 185.508... TONS) OPERATIONS Preparations for Emergencies § 185.508 Wearing of life jackets. (a) The master of a vessel shall require passengers to don life jackets when possible hazardous conditions exist, including...

  2. 46 CFR 185.508 - Wearing of life jackets.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Wearing of life jackets. 185.508 Section 185.508... TONS) OPERATIONS Preparations for Emergencies § 185.508 Wearing of life jackets. (a) The master of a vessel shall require passengers to don life jackets when possible hazardous conditions exist, including...

  3. 46 CFR 185.508 - Wearing of life jackets.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Wearing of life jackets. 185.508 Section 185.508... TONS) OPERATIONS Preparations for Emergencies § 185.508 Wearing of life jackets. (a) The master of a vessel shall require passengers to don life jackets when possible hazardous conditions exist, including...

  4. 46 CFR 185.508 - Wearing of life jackets.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Wearing of life jackets. 185.508 Section 185.508... TONS) OPERATIONS Preparations for Emergencies § 185.508 Wearing of life jackets. (a) The master of a vessel shall require passengers to don life jackets when possible hazardous conditions exist, including...

  5. 46 CFR 185.508 - Wearing of life jackets.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Wearing of life jackets. 185.508 Section 185.508... TONS) OPERATIONS Preparations for Emergencies § 185.508 Wearing of life jackets. (a) The master of a vessel shall require passengers to don life jackets when possible hazardous conditions exist, including...

  6. BARRIERS TO LIFE JACKET USE AMONG ADULT RECREATIONAL BOATERS

    PubMed Central

    Quistberg, D. Alex; Quan, Linda; Ebel, Beth E.; Bennett, Elizabeth E.; Mueller, Beth A.

    2015-01-01

    Objective To identify barriers to life jacket use. Design Cross-sectional survey. Setting Nine public boat ramps in western Washington State, USA, August-November, 2008. Participants 675 adult boaters (>18 years) on motor boats <26 feet long. Main outcome Low or no life jacket use (0–50% of time) versus high life jacket use (51–100% of time). Results Low/no life jacket use (0%–50% of time) was associated with longer boat length (per foot, risk ratio [RR] 1.03, 95% confidence interval [CI] 1.02–1.05), alcohol use (RR 1.11, 95% CI 1.01–1.20), perception of life jackets as “uncomfortable” (RR 1.29, 95%CI 1.09–1.52), perceived greater level of swimming ability (RR 1.25, 95% CI 1.03–1.53 for “expert swimmer”), and possibly with lack of confidence that a life jacket may save one from drowning (RR 1.13, 95%CI 0.96–1.32). Low life jacket use was less likely when a child was onboard (RR 0.88, 95% CI 0.79–0.99), or if the respondent had taken a boating safety class (RR 0.94, 95% CI 0.87–1.01). Conclusions Life jacket use may increase with more comfortable devices, such as inflatable life jackets, and with increased awareness of their efficacy in preventing drowning. Boater education classes may be associated with increased life jacket use among adults. PMID:24686261

  7. 30 CFR 57.15020 - Life jackets and belts.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Life jackets and belts. 57.15020 Section 57.15020 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL... Protection Surface Only § 57.15020 Life jackets and belts. Life jackets or belts shall be worn where there is...

  8. 30 CFR 56.15020 - Life jackets and belts.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Life jackets and belts. 56.15020 Section 56.15020 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL... § 56.15020 Life jackets and belts. Life jackets or belts shall be worn where there is danger from...

  9. 30 CFR 57.15020 - Life jackets and belts.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Life jackets and belts. 57.15020 Section 57.15020 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL... Protection Surface Only § 57.15020 Life jackets and belts. Life jackets or belts shall be worn where there is...

  10. 46 CFR 122.508 - Wearing of life jackets.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Wearing of life jackets. 122.508 Section 122.508... Preparations for Emergencies § 122.508 Wearing of life jackets. (a) The master of a vessel shall require passengers to don life jackets when possible hazardous conditions exist, including, but not limited to: (1...

  11. 46 CFR 122.508 - Wearing of life jackets.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Wearing of life jackets. 122.508 Section 122.508... Preparations for Emergencies § 122.508 Wearing of life jackets. (a) The master of a vessel shall require passengers to don life jackets when possible hazardous conditions exist, including, but not limited to: (1...

  12. 30 CFR 56.15020 - Life jackets and belts.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Life jackets and belts. 56.15020 Section 56.15020 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL... § 56.15020 Life jackets and belts. Life jackets or belts shall be worn where there is danger from...

  13. 30 CFR 57.15020 - Life jackets and belts.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Life jackets and belts. 57.15020 Section 57.15020 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL... Protection Surface Only § 57.15020 Life jackets and belts. Life jackets or belts shall be worn where there is...

  14. 46 CFR 122.508 - Wearing of life jackets.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Wearing of life jackets. 122.508 Section 122.508... Preparations for Emergencies § 122.508 Wearing of life jackets. (a) The master of a vessel shall require passengers to don life jackets when possible hazardous conditions exist, including, but not limited to: (1...

  15. 30 CFR 56.15020 - Life jackets and belts.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Life jackets and belts. 56.15020 Section 56.15020 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL... § 56.15020 Life jackets and belts. Life jackets or belts shall be worn where there is danger from...

  16. 30 CFR 57.15020 - Life jackets and belts.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Life jackets and belts. 57.15020 Section 57.15020 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL... Protection Surface Only § 57.15020 Life jackets and belts. Life jackets or belts shall be worn where there is...

  17. 30 CFR 56.15020 - Life jackets and belts.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Life jackets and belts. 56.15020 Section 56.15020 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL... § 56.15020 Life jackets and belts. Life jackets or belts shall be worn where there is danger from...

  18. 30 CFR 57.15020 - Life jackets and belts.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Life jackets and belts. 57.15020 Section 57.15020 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL... Protection Surface Only § 57.15020 Life jackets and belts. Life jackets or belts shall be worn where there is...

  19. 46 CFR 122.508 - Wearing of life jackets.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Wearing of life jackets. 122.508 Section 122.508... Preparations for Emergencies § 122.508 Wearing of life jackets. (a) The master of a vessel shall require passengers to don life jackets when possible hazardous conditions exist, including, but not limited to: (1...

  20. 46 CFR 122.508 - Wearing of life jackets.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Wearing of life jackets. 122.508 Section 122.508... Preparations for Emergencies § 122.508 Wearing of life jackets. (a) The master of a vessel shall require passengers to don life jackets when possible hazardous conditions exist, including, but not limited to: (1...

  1. 30 CFR 56.15020 - Life jackets and belts.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Life jackets and belts. 56.15020 Section 56.15020 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL... § 56.15020 Life jackets and belts. Life jackets or belts shall be worn where there is danger from...

  2. Vacuum-jacketed transfer line installation technique

    NASA Technical Reports Server (NTRS)

    Bowers, W. M.

    1968-01-01

    Rolling-type spacers in the form of steel balls retained in appropriate sleeves affixed at intervals to the exterior of the transfer line facilitate the installation of a vacuum-jacketed line. They act as standoffs to position the transfer line concentrically within the vacuum jacket line.

  3. JacketSE: An Offshore Wind Turbine Jacket Sizing Tool; Theory Manual and Sample Usage with Preliminary Validation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Damiani, Rick

    This manual summarizes the theory and preliminary verifications of the JacketSE module, which is an offshore jacket sizing tool that is part of the Wind-Plant Integrated System Design & Engineering Model toolbox. JacketSE is based on a finite-element formulation and on user-prescribed inputs and design standards' criteria (constraints). The physics are highly simplified, with a primary focus on satisfying ultimate limit states and modal performance requirements. Preliminary validation work included comparing industry data and verification against ANSYS, a commercial finite-element analysis package. The results are encouraging, and future improvements to the code are recommended in this manual.

  4. JACKETED FUEL ELEMENTS FOR GRAPHITE MODERATED REACTORS

    DOEpatents

    Szilard, L.; Wigner, E.P.; Creutz, E.C.

    1959-05-12

    Fuel elements for a heterogeneous, fluid cooled, graphite moderated reactor are described. The fuel elements are comprised of a body of natural uranium hermetically sealed in a jacket of corrosion resistant material. The jacket, which may be aluminum or some other material which is non-fissionable and of a type having a low neutron capture cross-section, acts as a barrier between the fissioning isotope and the coolant or moderator or both. The jacket minimizes the tendency of the moderator and coolant to become radioactive and/or contaminated by fission fragments from the fissioning isotope.

  5. Thermal-leak analyzer for vacuum-jacketed lines

    NASA Technical Reports Server (NTRS)

    Heisman, R. M.; Iceland, W. F.; Ruppe, E. P.

    1978-01-01

    Technique involves coating suspected area with water-soluble black paint that gives even, infrared emission. Painted area is warmed with heat gun; an infrared scanner is used to detect cooled spot on jacket exterior. Introduction of atmospheric pressure into jacket intensifies leak jet and improves test sensitivity.

  6. Lightweight Vacuum Jacket for Cryogenic Insulation. Volume 1

    NASA Technical Reports Server (NTRS)

    Barclay, D. L.; Bell, J. E.; Brogren, E. W.; Straayer, J. W.

    1975-01-01

    The feasibility of producing a lightweight vacuum jacket using state-of-the-art technology and materials was examined. Design and analytical studies were made on a full-scale, orbital maneuvering system fuel tank. Preliminary design details were made for the tank assembly, including an optimized vacuum jacket and multilayer insulation system. A half-scale LH2 test model was designed and fabricated, and a force/stiffness proof test was conducted on the vacuum jacket. A vacuum leak rate of .000001 atmosphere ml of helium per second was measured, approximately 1500 hours of vacuum pressure were sustained, and 29 vacuum-pressure cycles were experienced prior to failure.

  7. JACKETING URANIUM

    DOEpatents

    Saller, H.A.; Keeler, J.R.

    1959-07-14

    The bonding to uranium of sheathing of iron or cobalt, or nickel, or alloys thereof is described. The bonding is accomplished by electro-depositing both surfaces to be joined with a coating of silver and amalgamating or alloying the silver layer with mercury or indium. Then the silver alloy is homogenized by exerting pressure on an assembly of the uranium core and the metal jacket, reducing the area of assembly and heating the assembly to homogenize by diffusion.

  8. The confining effectiveness of NiTiNb and NiTi SMA wire jackets for concrete

    NASA Astrophysics Data System (ADS)

    Choi, Eunsoo; Chung, Young-Soo; Choi, Jun-Hyeok; Kim, Hong-Taek; Lee, Hacksoo

    2010-03-01

    The purpose of this study is to assess the confining effectiveness of shape memory alloy (SMA) wire jackets for concrete. The performance of SMA wire jackets was compared to that of steel jackets. A prestrained martensitic SMA wire was wrapped around a concrete cylinder and then heated by a heating jacket. In the process, a confining stress around the cylinder was developed in the SMA wire due to the shape memory effect; this jacketing method can increase the strength and ductility of the cylinder under an axial compressive load. In this study, NiTi and NiTiNb SMA wires of 1.0 mm in diameter were used for the confinement. Recovery tests were conducted on the wires to assess their recovery and residual stress. The confinement by SMA wire jackets increased the strength slightly and greatly increased the ductility compared to the strength and ductility of plain concrete cylinders. The NiTiNb SMA wire jacket showed better performance than that of the NiTi SMA wire jacket. The confining effectiveness of the SMA wire jackets of this study was estimated to be similar to that of the steel jackets. This study showed the potential of the SMA wire jacketing method to retrofit reinforced concrete columns and protect them from seismic risks.

  9. Splice connector with internal heat transfer jacket

    DOEpatents

    Silva, Frank A.; Mayer, Robert W.

    1977-01-01

    A heat transfer jacket is placed over the terminal portions of the conductors of a pair of high voltage cables which are connected in a splice connection wherein a housing surrounds the connected conductor portions, the heat transfer jacket extending longitudinally between the confronting ends of a pair of adaptor sleeves placed upon the insulation of the cables to engage and locate the adaptor sleeves relative to one another, and laterally between the conductors and the housing to provide a path of relatively high thermal conductivity between the connected conductor portions and the housing.

  10. Expected damages of retrofitted bridges with RC jacketing

    NASA Astrophysics Data System (ADS)

    Montes, O.; Jara, J. M.; Jara, M.; Olmos, B. A.

    2015-07-01

    The bridge infrastructure in many countries of the world consists of medium span length structures built several decades ago and designed for very low seismic forces. Many of them are reinforced concrete structures that according to the current code regulations have to be rehabilitated to increase their seismic capacity. One way to reduce the vulnerability of the bridges is by using retrofitting techniques that increase the strength of the structure or by incorporating devices to reduce the seismic demand. One of the most common retrofit techniques of the bridges substructures is the use of RC jacketing; this research assesses the expected damages of seismically deficient medium length highway bridges retrofitted with reinforced concrete jacketing, by conducting a parametric study. We select a suite of twenty accelerograms of subduction earthquakes recorded close to the Pacific Coast in Mexico. The original structures consist of five 30 m span simple supported bridges with five pier heights of 5 m, 10 m, 15 m 20 and 25 m and the analyses include three different jacket thickness and three steel ratios. The bridges were subjected to the seismic records and non-linear time history analyses were carried out by using the OpenSEEs Plataform. Results allow selecting the reinforced concrete jacketing that better improves the expected seismic behavior of the bridge models.

  11. Mobile communication jacket for people with severe speech impairment.

    PubMed

    Lampe, Renée; Blumenstein, Tobias; Turova, Varvara; Alves-Pinto, Ana

    2018-04-01

    Cerebral palsy is a movement disorder caused by damage to motor control areas of the developing brain during early childhood. Motor disorders can also affect the ability to produce clear speech and to communicate. The aim of this study was to develop and to test a prototype of an assistive tool with an embedded mobile communication device to support patients with severe speech impairments. A prototype was developed by equipping a cycling jacket with a display, a small keyboard, a LED and an alarm system, all controlled by a microcontroller. Functionality of the prototype was tested in six participants (aged 7-20 years) with cerebral palsy and global developmental disorder and three healthy persons. A patient questionnaire consisting of seven items was used as an evaluation tool. A working prototype of the communication jacket was developed and tested. The questionnaire elicited positive responses from participants. Improvements to correct revealed weaknesses were proposed. Enhancements like voice output of pre-selected phrases and enlarged display were implemented. Integration in a jacket makes the system mobile and continuously available to the user. The communication jacket may be of great benefit to patients with motor and speech impairments. Implications for Rehabilitation The communication jacket developed can be easily used by people with movement and speech impairment. All technical components are integrated in a garment and do not have to be held with the hands or transported separately. The system is adaptable to individual use. Both expected and unexpected events can be dealt with, which contributes to the quality of life and self-fulfilment.

  12. The effect on engine performance of change in jacket-water outlet temperature

    NASA Technical Reports Server (NTRS)

    Garlock, E A; Ellis, Greer

    1933-01-01

    Tests made on a Curtiss D-12 engine in the Altitude Laboratory at the Bureau of Standards show the following effects on engine performance of change in jacket-water outlet temperature: 1) Friction at all altitudes is a linear function of the jacket-water temperature, decreasing with increasing temperature. 2) The brake horsepower below an altitude of about 9,000 feet decreases, and at higher altitudes increases, with jacket-water temperature. 3) The brake specific fuel consumption tends to decrease, at all altitudes, with increasing jacket-water temperature. 4) The percentage change in brake power output is roughly equal to the algebraic sum of the percentage change in volumetric efficiency and mechanical efficiency.

  13. Method of preventing leakage of a fluid along and through an insulating jacket of a thermocouple

    DOEpatents

    Thermos, Anthony Constantine; Rahal, Fadi Elias

    2002-01-01

    A thermocouple assembly includes a thermocouple; a plurality of lead wires extending from the thermocouple; an insulating jacket extending along and enclosing the plurality of leads; and at least one internally sealed area within the insulating jacket to prevent fluid leakage along and within the insulating jacket. The invention also provides a method of preventing leakage of a fluid along and through an insulating jacket of a thermocouple including the steps of a) attaching a plurality of lead wires to a thermocouple; b) adding a heat sensitive pseudo-wire to extend along the plurality of lead wires; c) enclosing the lead wires and pseudo-wire inside an insulating jacket; d) locally heating axially spaced portions of the insulating jacket to a temperature which melts the pseudo-wire and fuses it with an interior surface of the jacket.

  14. Destabilization and intracranial fragmentation of a full metal jacket bullet.

    PubMed

    Farrugia, A; Raul, J S; Geraut, A; Tortel, M C; Ludes, B

    2009-10-01

    We report a case with an atypical entrance wound as a result of a destabilized full metal jacket bullet penetration. The destabilized bullet by an impact with the dorsal hand experiences a yawing to tumbling motion in flight. The large angle of yaw induces a larger presenting profile upon impact that contributes, associated to a rapid deceleration, to a greater mechanical force on the projectile structure and a fragmentation into core and jacket. Forensic pathologists have to be aware that the metal jacket bullet could tend to break up outside or inside the body particularly after a shooting through a target. This phenomenon induces atypical entrance wounds and atypical X-ray presentation. 2009 Elsevier Ltd and Faculty of Forensic and Legal Medicine.

  15. Yellow jackets may be an underestimated component of an ant-seed mutualism

    USGS Publications Warehouse

    Bale, M.T.; Zettler, J.A.; Robinson, B.A.; Spira, T.P.; Allen, Craig R.

    2003-01-01

    Yellow jackets (Hymenoptera: Vespidae) are attracted to the typically ant-dispersed seeds of trilliums and will take seeds from ants in the genus Aphaenogaster. To determine if yellow jacket, Vespula maculifrons (Buysson), presence interferes with seed foraging by ants, we presented seeds of Trillium discolor Wray to three species (A. texana carolinensis Wheeler, Formica schaufussi Mayr, and Solenopsis invicta Buren) of seed-carrying ants in areas where vespids were present or excluded. We found that interspecific aggression between yellow jackets and ants is species specific. Vespid presence decreased average foraging time and increased foraging efficiency of two of the three ant species studied, a situation that might reflect competition for a limited food source. We also found that yellow jackets removed more seeds than ants, suggestive that vespids are important, albeit underestimated, components of ant-seed mutualisms.

  16. Infrared detector Dewars - Increased LN2 hold time and vacuum jacket life spans

    NASA Technical Reports Server (NTRS)

    Jennings, D. E.; Boyd, W. J.; Blass, W. E.

    1976-01-01

    IR detector Dewars commonly suffer from shorter than desired LN2 hold times and insulation jacket vacuum corruption over relatively short time periods. In an attempt to solve this problem for a 9144 detector Dewar, small 1 liter/s appendage ion pumps were selected for continuous pumping of the vacuum jackets. This procedure extended LN2 hold times from 20 to 60 h and virtually eliminated vacuum jacket corruption. Thus the detector systems are usable continuously over periods of 6 months or more.

  17. Lightweight Vacuum Jacket for Cryogenic Insulation - Appendices to Final Report. Volume 2

    NASA Technical Reports Server (NTRS)

    Barclay, D. L.; Bell, J. E.; Brogren, E. W.; Straayer, J. W.

    1975-01-01

    The feasibility is demonstrated of producing a lightweight vacuum jacket using state-of-the-art technology and materials. Design and analytical studies were made on an orbital maneuvering system fuel tank. Preliminary design details were completed for the tank assembly which included an optimized vacuum jacket and multilayered insulation system. A half-scale LH2 test model was designed and fabricated and a force/stiffness proof test was conducted on the vacuum jacket. A vacuum leak rate of 0.00001 was measured, approximately 1500 hours of vacuum pressure was sustained, and 29 vacuum pressure cycles were experienced prior to failure. For vol. 1, see N75-26192.

  18. Piano jacket for perceiving and playing music for patients with cerebral palsy.

    PubMed

    Lampe, Renée; Turova, Varvara; Alves-Pinto, Ana

    2017-12-23

    Patients with cerebral palsy with severe motor disabilities are limited not only in everyday life activities but also in choice of their hobbies. Playing a musical instrument is for the majority not possible, even though music constitutes a central component of many relaxation activities for people with disabilities. To give affected patients the opportunity to make music and to learn piano playing through somatosensory perception, a prototype of piano jacket was developed. A cycling jacket was equipped with boxes, each representing a musical note, incorporated into the sleeves. Each box contains vibration motors and LEDs. These can be used to translate the sequences of piano key presses performed at an external E-piano. An additional operation mode allows the user to actively play a melody himself by touching the same boxes that also incorporate touch sensor components. A working prototype of the piano jacket was developed. The sensory piano jacket provides patients with cerebral palsy and contractures the possibility to develop sensorimotor skills, motor abilities and participation in music-related activities. The jacket is planned to be used in music lessons. Implications for Rehabilitation The system is suitable even for patients with severe motor disabilities and especially joint contractures. Excellent handling through large easily accessible communication buttons. All building blocks are held in a garment, which allows for easy portability and gripping comfort.

  19. Factors associated with life jacket use among cabin sailboat and day sailor boaters in the United States.

    PubMed

    Spitzer, Natalie; Phillips, Maile T; Chow, Wendy; Mangione, Thomas W

    2018-06-01

    In 2015, drowning accounted for 68% of the 626 recreational boating related deaths in the United States. Although life jackets are estimated to prevent between 50% to 80% of boating deaths, approximately 83% of sailboat-related drowning victims were reported to not be wearing life jackets. Life jacket use among adult boaters has remained consistently low across most boat types and may vary by boater, boating, and environmental conditions. Although many risky environmental and boating factors may be associated with a higher risk of boating death, drowning occurs in all situations and it is useful to understand adult life jacket wearing behaviors in differing boating situations. This study uses observational survey data from 61318 adult sailors collected during the summer months of 1999 - 2017 from 124 selected study sites across 30 states in the US. Life jacket use was compared for day sailors and cabin sailboats by multiple boating, boater, and environmental conditions using Chi-square tests for equality of proportions. Results of these tests led to a choice of 3 informative and scientifically compelling variables to summarize variation in life jacket use for each sailboat type. Odds ratios were calculated comparing life jacket use from each boating situation to the lowest risk situation as determined by the 3 selected variables. These variables were represented in a tree diagram, detailing the additive impact of each factor. Following these analyses, all boating conditions were categorized to be risky or non-risky and a count variable was created for each observation based on the number of risks present. Cochran-Armitage trend tests were conducted to test for linearity in life jacket use for both boat types. The overall life jacket wear rate was higher among adults in day sailor sailboats (51.6%) compared to cabin sailboats (13.8%) and in all measured demographic, boating, and environmental circumstances. Comparing high-risk cabin sailboat conditions of low water

  20. 46 CFR 117.72 - Personal flotation devices carried in addition to life jackets.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Personal flotation devices carried in addition to life jackets. 117.72 Section 117.72 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL... approved life jackets required to be worn during drills and emergencies. (b) Wearable marine buoyant...

  1. 46 CFR 117.72 - Personal flotation devices carried in addition to life jackets.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Personal flotation devices carried in addition to life jackets. 117.72 Section 117.72 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL... approved life jackets required to be worn during drills and emergencies. (b) Wearable marine buoyant...

  2. Arikan and Alamouti matrices based on fast block-wise inverse Jacket transform

    NASA Astrophysics Data System (ADS)

    Lee, Moon Ho; Khan, Md Hashem Ali; Kim, Kyeong Jin

    2013-12-01

    Recently, Lee and Hou (IEEE Signal Process Lett 13: 461-464, 2006) proposed one-dimensional and two-dimensional fast algorithms for block-wise inverse Jacket transforms (BIJTs). Their BIJTs are not real inverse Jacket transforms from mathematical point of view because their inverses do not satisfy the usual condition, i.e., the multiplication of a matrix with its inverse matrix is not equal to the identity matrix. Therefore, we mathematically propose a fast block-wise inverse Jacket transform of orders N = 2 k , 3 k , 5 k , and 6 k , where k is a positive integer. Based on the Kronecker product of the successive lower order Jacket matrices and the basis matrix, the fast algorithms for realizing these transforms are obtained. Due to the simple inverse and fast algorithms of Arikan polar binary and Alamouti multiple-input multiple-output (MIMO) non-binary matrices, which are obtained from BIJTs, they can be applied in areas such as 3GPP physical layer for ultra mobile broadband permutation matrices design, first-order q-ary Reed-Muller code design, diagonal channel design, diagonal subchannel decompose for interference alignment, and 4G MIMO long-term evolution Alamouti precoding design.

  3. An Innovative Cooling Jacket to Combat Heat Intolerance in Children with Anhidrosis.

    PubMed

    Inamadar, Arun C; Palit, Aparna; Khurana, Neha

    2017-07-01

    Hyperthermia and heat intolerance are distressing symptoms in patients with anhidrosis. Body cooling devices are an integral part of management of these patients. A cooling jacket made from easily available materials has been invented for a girl with congenital insensitivity to pain and anhidrosis with severe heat intolerance. This innovative cooling jacket may be helpful for anhidrotic children in resource-poor situations. © 2017 Wiley Periodicals, Inc.

  4. Comparing the cyclic behavior of concrete cylinders confined by shape memory alloy wire or steel jackets

    NASA Astrophysics Data System (ADS)

    Park, Joonam; Choi, Eunsoo; Park, Kyoungsoo; Kim, Hong-Taek

    2011-09-01

    Shape memory alloy (SMA) wire jackets for concrete are distinct from conventional jackets of steel or fiber reinforced polymer (FRP) since they provide active confinement which can be easily achieved due to the shape memory effect of SMAs. This study uses NiTiNb SMA wires of 1.0 mm diameter to confine concrete cylinders with the dimensions of 300 mm × 150 mm (L × D). The NiTiNb SMAs have a relatively wider temperature hysteresis than NiTi SMAs; thus, they are more suitable for the severe temperature-variation environments to which civil structures are exposed. Steel jackets of passive confinement are also prepared in order to compare the cyclic behavior of actively and passively confined concrete cylinders. For this purpose, monotonic and cyclic compressive loading tests are conducted to obtain axial and circumferential strain. Both strains are used to estimate the volumetric strains of concrete cylinders. Plastic strains from cyclic behavior are also estimated. For the cylinders jacketed by NiTiNb SMA wires, the monotonic axial behavior differs from the envelope of cyclic behavior. The plastic strains of the actively confined concrete show a similar trend to those of passive confinement. This study proposed plastic strain models for concrete confined by SMA wire or steel jackets. For the volumetric strain, the active jackets of NiTiNb SMA wires provide more energy dissipation than the passive jacket of steel.

  5. Using the HELIOS facility for assessment of bundle-jacket thermal coupling in a CICC

    NASA Astrophysics Data System (ADS)

    Lacroix, B.; Rousset, B.; Cloez, H.; Decool, P.; Duchateau, J. L.; Hoa, C.; Luchier, N.; Nicollet, S.; Topin, F.

    2016-12-01

    In a Cable In Conduit Conductor (CICC) cooled by forced circulation of supercritical helium, the heat exchange in the bundle region can play a significant role for conductor safe operation, while remaining a quite uncertain parameter. Heat exchange between bundle and jacket depends on the relative contributions of convective heat transfer due to the helium flow inside the bundle and of thermal resistance due to the wrappings between the cable and the conduit. In order to qualify this thermal coupling at realistic operating conditions, a dedicated experiment on a 1.2 m sample of ITER Toroidal Field (TF) dummy conductor was designed and performed in the HELIOS test facility at CEA Grenoble. Several methods were envisaged, and the choice was made to assess bundle-jacket heat transfer coefficient by measuring the temperature of a solid copper cylinder inserted over the conductor jacket and submitted to heat deposition on its outer surface. The mock-up was manufactured and tested in spring 2015. Bundle-jacket heat transfer coefficient was found in the range 300-500 W m-2 K-1. Results analysis suggests that the order of magnitude of convective heat transfer coefficient inside bundle is closer to Colburn-Reynolds analogy than to Dittus-Boelter correlation, and that bundle-jacket thermal coupling is mainly limited by thermal resistance due to wrappings. A model based on an equivalent layer of stagnant helium between wraps and jacket was proposed and showed a good consistency with the experiment, with relevant values for the helium layer thickness.

  6. METHOD OF JACKETING URANIUM BODIES

    DOEpatents

    Maloney, J.O.; Haines, E.B.; Tepe, J.B.

    1958-08-26

    An improved process is presented for providing uranium slugs with thin walled aluminum jackets. Since aluminum has a slightiy higher coefficient of thermal expansion than does uraaium, both uranium slugs and aluminum cans are heated to an elevated temperature of about 180 C, and the slug are inserted in the cans at that temperature. During the subsequent cooling of the assembly, the aluminum contracts more than does the uranium and a tight shrink fit is thus assured.

  7. Steam jacket dynamics in underground coal gasification

    NASA Astrophysics Data System (ADS)

    Otto, Christopher; Kempka, Thomas

    2017-04-01

    Underground coal gasification (UCG) has the potential to increase the world-wide hydrocarbon reserves by utilization of deposits not economically mineable by conventional methods. In this context, UCG involves combusting coal in-situ to produce a high-calorific synthesis gas, which can be applied for electricity generation or chemical feedstock production. Apart from high economic potentials, in-situ combustion may cause environmental impacts such as groundwater pollution by by-product leakage. In order to prevent or significantly mitigate these potential environmental concerns, UCG reactors are generally operated below hydrostatic pressure to limit the outflow of UCG process fluids into overburden aquifers. This pressure difference effects groundwater inflow into the reactor and prevents the escape of product gas. In the close reactor vicinity, fluid flow determined by the evolving high reactor temperatures, resulting in the build-up of a steam jacket. Numerical modeling is one of the key components to study coupled processes in in-situ combustion. We employed the thermo-hydraulic numerical simulator MUFITS (BINMIXT module) to address the influence of reactor pressure dynamics as well as hydro-geological coal and caprock parameters on water inflow and steam jacket dynamics. The US field trials Hanna and Hoe Creek (Wyoming) were applied for 3D model validation in terms of water inflow matching, whereby the good agreement between our modeling results and the field data indicates that our model reflects the hydrothermal physics of the process. In summary, our validated model allows a fast prediction of the steam jacket dynamics as well as water in- and outflows, required to avoid aquifer contamination during the entire life cycle of in-situ combustion operations.

  8. Advanced Main Combustion Chamber structural jacket strength analysis

    NASA Astrophysics Data System (ADS)

    Johnston, L. M.; Perkins, L. A.; Denniston, C. L.; Price, J. M.

    1993-04-01

    The structural analysis of the Advanced Main Combustion Chamber (AMCC) is presented. The AMCC is an advanced fabrication concept of the Space Shuttle Main Engine main combustion chamber (MCC). Reduced cost and fabrication time of up to 75 percent were the goals of the AMCC with cast jacket with vacuum plasma sprayed or platelet liner. Since the cast material for the AMCC is much weaker than the wrought material for the MCC, the AMCC is heavier and strength margins much lower in some areas. Proven hand solutions were used to size the manifolds cutout tee areas for combined pressure and applied loads. Detailed finite element strength analyses were used to size the manifolds, longitudinal ribs, and jacket for combined pressure and applied local loads. The design of the gimbal actuator strut attachment lugs were determined by finite element analyses and hand solutions.

  9. A jacket for assisting sensorimotor-related impairments and spatial perception

    NASA Astrophysics Data System (ADS)

    Blumenstein, Tobias; Turova, Varvara; Alves-Pinto, Ana; Lampe, Renée

    2017-04-01

    A sensorimotor jacket, which is able to measure distances to nearby objects with ultrasonic sensors and to transmit information about distances via vibrating transducers, has been designed with the aim of improving the spatial awareness of patients with cerebral palsy and to facilitate spatial orientation for blind people. The efficiency was tested for patients diagnosed with cerebral palsy, blind participants and healthy people. A positive impact of the sensorimotor jacket on the performance in a spatial task has been established both in patients with cerebral palsy and blind participants. Moreover, for patients with cerebral palsy, the training effect was visible after only three training exercises.

  10. PROCESS FOR PRODUCING JACKETED BODIES

    DOEpatents

    Saller, H.A.

    1958-01-21

    A method is given for enclosing a metallic core within an outer protective jacket, such as in the production of fuel elements for neutronic reactors. The method comprises the steps of inserting the body of a first metal into an aperture in a frame of a second metal, placing a sheet of the second metal on each of opposite sides of the assembled body and frame, and bonding the sheets to the body and the frame and the body and the frame to one another.

  11. METHOD OF JACKETING FISSIONABLE MATERIALS

    DOEpatents

    Foster, L.M.

    1959-02-01

    An improvement is presented in the jacketing of a metal body accomplished by electroplating upon that portion of the metal container to be protected from the bonding material a niatcrial such as Cr which is impermeable to the bonding material. After the bonding operation the electroplate is removed and the metal container surfuce, unimpaired, may be welded to a cap which effects a closure. Generally in such an operation the metal body is U, the metal container is Al and the bonding material is a Zn alloy.

  12. 46 CFR 185.730 - Servicing of inflatable liferafts, inflatable buoyant apparatus, inflatable life jackets, and...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... apparatus, inflatable life jackets, and inflated rescue boats. 185.730 Section 185.730 Shipping COAST GUARD... liferafts, inflatable buoyant apparatus, inflatable life jackets, and inflated rescue boats. (a) An... inflated rescue boats must be in accordance with the manufacturer's instructions. All repairs must be made...

  13. 46 CFR 185.730 - Servicing of inflatable liferafts, inflatable buoyant apparatus, inflatable life jackets, and...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... apparatus, inflatable life jackets, and inflated rescue boats. 185.730 Section 185.730 Shipping COAST GUARD... liferafts, inflatable buoyant apparatus, inflatable life jackets, and inflated rescue boats. (a) An... inflated rescue boats must be in accordance with the manufacturer's instructions. All repairs must be made...

  14. 46 CFR 185.730 - Servicing of inflatable liferafts, inflatable buoyant apparatus, inflatable life jackets, and...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... apparatus, inflatable life jackets, and inflated rescue boats. 185.730 Section 185.730 Shipping COAST GUARD... liferafts, inflatable buoyant apparatus, inflatable life jackets, and inflated rescue boats. (a) An... inflated rescue boats must be in accordance with the manufacturer's instructions. All repairs must be made...

  15. THE MAN&RSQUO;S JACKET DESIGN FOR DISASSEMBLY: AN IMPLEMENTATION OF C2CAD FRAMEWORK

    EPA Science Inventory

    The C2CAD model served as the basis in the man’s jacket design and production. In man’s jackets, both natural and synthetic materials are commonly used for fabrics, threads, and buttons. To promote disassembly and value retention, we minimized material diversity an...

  16. 46 CFR 122.730 - Servicing of inflatable liferafts, inflatable buoyant apparatus, inflatable life jackets, and...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... apparatus, inflatable life jackets, and inflated rescue boats. 122.730 Section 122.730 Shipping COAST GUARD..., inflatable life jackets, and inflated rescue boats. (a) An inflatable liferaft or inflatable buoyant... other standard specified by the Commandant. (e) Repair and maintenance of inflated rescue boats must be...

  17. 46 CFR 122.730 - Servicing of inflatable liferafts, inflatable buoyant apparatus, inflatable life jackets, and...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... apparatus, inflatable life jackets, and inflated rescue boats. 122.730 Section 122.730 Shipping COAST GUARD..., inflatable life jackets, and inflated rescue boats. (a) An inflatable liferaft or inflatable buoyant... other standard specified by the Commandant. (e) Repair and maintenance of inflated rescue boats must be...

  18. 46 CFR 122.730 - Servicing of inflatable liferafts, inflatable buoyant apparatus, inflatable life jackets, and...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... apparatus, inflatable life jackets, and inflated rescue boats. 122.730 Section 122.730 Shipping COAST GUARD..., inflatable life jackets, and inflated rescue boats. (a) An inflatable liferaft or inflatable buoyant... other standard specified by the Commandant. (e) Repair and maintenance of inflated rescue boats must be...

  19. Systematic determination of perfluoroalkyl and polyfluoroalkyl substances (PFASs) in outdoor jackets.

    PubMed

    Gremmel, Christoph; Frömel, Tobias; Knepper, Thomas P

    2016-10-01

    Sixteen outdoor jackets were purchased in 2011/12 and analyzed for 23 different perfluoroalkyl and polyfluoroalkyl substances (PFASs). The jackets were selected based on their origin of production, price, market, and textile, such as polyester, nylon, polyamide, and content of poly(tetrafluoroethylene) membranes. Two robust analytical methods based on high pressure liquid chromatography combined with tandem mass spectrometry, as well as two liquid extractions, were developed enabling the analysis of PFASs with widely different physico-chemical properties. The jackets were found to contain PFASs in a range between 0.03 and 719 μg/m(2). Perfluorooctanoic acid (PFOA) was omnipresent (0.02-171 μg/m(2)), although at lower concentrations compared to the precursors of perfluoroalkyl carboxylic acids (PFCAs), namely fluorotelomer alcohols (FTOHs) (<0.001-698 μg/m(2)). Perfluoroalkane sulfonic acids and their putative precursors, in particular perfluoroalkane sulfonamides, were detected much less frequently at concentrations up to 5 μg/m(2). To determine the effect of the volatility of FTOHs, four selected jackets were stored in a sealed bag in the dark at room temperature and re-analyzed after 3.5 years. Only 10%-20% of the initial concentration of 8:2-FTOH and 20%-50% of 10:2-FTOH were found, whereas the concentrations of PFOA and perfluorodecanoic acid increased significantly. This supports the hypothesis that PFAS concentrations in textiles are also strongly dependent on age, and conditions of transport and storage. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Differences in the element contents between gunshot entry wounds with full-jacketed bullet and lead bullet.

    PubMed

    Wunnapuk, Klintean; Durongkadech, Piya; Minami, Takeshi; Ruangyuttikarn, Werawan; Tohno, Setsuko; Vichairat, Karnda; Azuma, Cho; Sribanditmongkol, Pongruk; Tohno, Yoshiyuki

    2007-01-01

    To elucidate characteristics of gunshot residues in gunshot entry wounds with full-jacketed and lead bullets, element contents in entry gunshot wounds and control skins were analyzed by inductively coupled plasma-atomic emission spectrometry (ICP-AES). It was found that a high content of Fe and Zn was deposited in the gunshot entry wounds with full-jacketed bullet, whereas a high content of Pb was deposited in the gunshot entry wounds with lead (unjacked) bullet. It should be noted that the content of Pb was significantly higher in the gunshot entry wounds with lead bullet than in those with full-jacketed bullet. Regarding the relationships among elements, it was found that there were significant direct correlations between Pb and either Sb or Ba contents in both gunshot entry wounds with full-jacketed and lead bullets. As Pb increased in both gunshot entry wounds, Sb and Ba also increased in the wounds.

  1. Clinical Performance of Pedo Jacket Crowns in Maxillary Anterior Primary Teeth.

    PubMed

    Castro, Aimee; Badr, Sherine B Y; El-Badrawy, Wafa; Kulkarni, Gajanan

    2016-09-15

    To assess the clinical performance of Pedo Jacket crowns for restoration of carious primary anterior teeth. A total of 129 carious primary incisors and canines of 48 children younger than 71 months of age- were restored with Pedo Jacket crowns and resin-modified glass ionomer cementation. They were assessed for: ease of use; presence of recurrent decay; wear; partial or complete loss of the crown; color stability; gingival health; and overall clinical success over a 12-month follow-up. The patient's behavior at the restorative appointment during crown placement was also assessed. An overall clinical success of 89.5 percent of the teeth in 87.3 percent of the children was seen one year later. The crowns were easy to use, even in uncooperative children. The color stability, wear, plaque accumulation, and gingival health were acceptable. Discoloration, wear, or complete loss of the crown were found in 13.1 percent, 5.4 percent, and 7.6 percent of children, respectively. Although not statistically significant, failures were associated with poor patient cooperation at the time of crown placement, poor oral hygiene, or operator error. Pedo Jacket crowns are a viable treatment alternative for carious maxillary primary anterior teeth.

  2. An under-designed RC frame: Seismic assessment through displacement based approach and possible refurbishment with FRP strips and RC jacketing

    NASA Astrophysics Data System (ADS)

    Valente, Marco; Milani, Gabriele

    2017-07-01

    Many existing reinforced concrete buildings in Southern Europe were built (and hence designed) before the introduction of displacement based design in national seismic codes. They are obviously highly vulnerable to seismic actions. In such a situation, simplified methodologies for the seismic assessment and retrofitting of existing structures are required. In this study, a displacement based procedure using non-linear static analyses is applied to a four-story existing RC frame. The aim is to obtain an estimation of its overall structural inadequacy as well as the effectiveness of a specific retrofitting intervention by means of GFRP laminates and RC jacketing. Accurate numerical models are developed within a displacement based approach to reproduce the seismic response of the RC frame in the original configuration and after strengthening.

  3. Travel health: a survey of life jacket designs currently in use on commercial aircraft.

    PubMed

    Bauer, Irmgard L

    2002-01-01

    Although any travel harbors potential health problems, travel across water poses the additional risk of involuntary contact with water in the event of an emergency. Studies suggest that fatal boat-related accidents have occurred due to the passengers' inability to don their life jackets. With the dramatic increase of long-haul flights, it was decided to investigate if potential safety hazards can be identified leading to similar problems in relation to the life jackets provided onboard aircraft. It was assumed that the variety of designs combined with a possible lack of attention paid to safety instructions could represent such a problem. Safety instruction cards in passengers' seat pockets usually depict the life jacket model used on a particular aircraft. Ninety-eight such safety cards from 53 airlines were analyzed and categorized to identify the range and variety of designs currently in use. Twelve different categories of life jacket models could be distinguished with some airlines using more than one model. It was also found that not all cards show a clear depiction of the models used, the cards of two airlines show two different designs on the same cards, and two other companies chose to change the model halfway through the pictured donning procedure. There is a wide variety of life jacket designs in use with the safety cards not always giving accurate instructions. This variety also has implications for the safety demonstration at the beginning of a flight. Further research is recommended into a range of topics, one being the quality and content of these instructions, and also into other personal floating devices provided for the safety of travelers in the event of an emergency over water.

  4. Viability of Bismuth as a Green Substitute for Lead in Jacketed .357 Magnum Revolver Bullets

    NASA Astrophysics Data System (ADS)

    Jenkins, Joel

    In seeking to develop environmentally friendly lead-free non-toxic bullets, the research ballistically evaluated the performance of copper-jacketed handgun bullets containing a pure bismuth core. The lead was first removed from 140 grain Hornady(TM) XTPRTM bullets of 38 caliber (.357 diameter) by melting. The empty jackets were then refilled with pure bismuth, including the forming of a correctly sized hollow-point cavity. Due to the lower density of bismuth as compared to lead, the bismuth-cored bullets consistently weighed 125 gains. Conveniently this allowed direct comparison to commercially available 125 grain Hornady(TM) XTPRTM lead-cored bullets of 38 caliber. Both bismuth-cored and lead-cored versions of the 125 grain bullets had identical nose dimensions and jacket material, the only dimensional difference being the bullet length below the cannelure. Shooting took place at an outdoor range using a 357 Magnum Ruger(TM) SP101RTM revolver with 3" barrel as the test weapon. FBI protocols were followed when firing through clothing, wallboard, plywood, steel plates and laminated glass. Wound paths and bullets were captured in ballistic gelatin, with data collected for velocity, penetration, expansion, and weight retention. Bismuth compared favorably with lead in all but the laminated glass test, where it under penetrated due to jacket separation.

  5. The technique of numerical research of cooling medium flow in the water jacket of self-lubricated bearing

    NASA Astrophysics Data System (ADS)

    Raikovskiy, N. A.; Tretyakov, A. V.; Abramov, S. A.; Nazmeev, F. G.; Pavlichev, S. V.

    2017-08-01

    The paper presents a numerical study method of the cooling medium flowing in the water jacket of self-lubricating sliding bearing based on ANSYS CFX. The results of numerical calculations have satisfactory convergence with the empirical data obtained on the testbed. Verification data confirm the possibility of applying this numerical technique for the analysis of coolant flowings in the self-lubricating bearing containing the water jacket.

  6. A comparison study of offshore wind support structures with monopiles and jackets for U.S. waters

    NASA Astrophysics Data System (ADS)

    Damiani, R.; Dykes, K.; Scott, G.

    2016-09-01

    U.S. experience in offshore wind is limited, and high costs are expected unless innovations are introduced in one or multiple aspects of the project, from the installed technology to the balance of system (BOS). The substructure is the main single component responsible for the BOS capital expenditure (CapEx) and thus one that, if improved, could yield significant levelized cost of energy (LCOE) savings. For projects in U.S. waters, multimember lattice structures (also known as jackets) can render required stiffness for transitional water depths at potentially lower costs than monopiles (MPs). In this study, we used a systems engineering approach to evaluate the LCOE of prototypical wind power plants at six locations along the eastern seaboard and the Gulf of Mexico for both types of support structures. Using a reference wind turbine and actual metocean conditions for the selected sites, we calculated loads for a parked and an operational situation, and we optimized the MP- and jacket-based support structures to minimize their overall mass. Using a suite of cost models, we then computed their associated LCOE. For all water depths, the MP-based configurations were heavier than their jacket counterparts, but the overall costs for the MPs were less than they were for jackets up to depths of slightly less than 30m. When the associated manufacturing and installation costs were included, jackets resulted in lower LCOE for depths greater than 40m. These results can be used by U.S. stakeholders to understand the potential for different technologies at different sites, but the methodology illustrated in this study can be further employed to analyze the effects of innovations and design choices throughout wind power plant systems.

  7. Optimal startup control of a jacketed tubular reactor.

    NASA Technical Reports Server (NTRS)

    Hahn, D. R.; Fan, L. T.; Hwang, C. L.

    1971-01-01

    The optimal startup policy of a jacketed tubular reactor, in which a first-order, reversible, exothermic reaction takes place, is presented. A distributed maximum principle is presented for determining weak necessary conditions for optimality of a diffusional distributed parameter system. A numerical technique is developed for practical implementation of the distributed maximum principle. This involves the sequential solution of the state and adjoint equations, in conjunction with a functional gradient technique for iteratively improving the control function.

  8. Mechanical and Chemical Properties of Harvested Hypalon Cable Jacket Subjected to Accelerated Thermal Aging

    DOE PAGES

    Duckworth, Robert C.; Kidder, Michelle K.; Aytug, Tolga; ...

    2018-02-27

    We report that for nuclear power plants (NPPs) considering second license renewal for operation beyond 60 years, knowledge of long-term operation, condition monitoring, and viability for the reactor components including reactor pressure vessel, concrete structures, and cable systems is essential. Such knowledge will provide NPP owners/operators with a basis for predicting performance and estimating the costs associated with monitoring or replacement programs for the affected systems. For cable systems that encompass a wide variety of materials, manufacturers, and in-plant locations, accelerated aging of harvested cable jacket and insulation can provide insight into a remaining useful life and methods for monitoring.more » Accelerated thermal aging in air at temperatures between 80°C and 120°C was conducted on a multiconductor control rod drive mechanism cable manufactured by Boston Insulated Wire (BIW). The cable, which had been in service for over 30 years, was jacketed with Hypalon and insulated with ethylene propylene rubber. From elongation at break (EAB) measurements and supporting Arrhenius analysis of the jacket material, an activation energy of 97.84 kJ/mol was estimated, and the time to degradation, as represented by 50% EAB at the expected maximum operating temperature of 45°C, was estimated to be 80 years. These values were slightly below previous measurements on similar BIW Hypalon cable jacket and could be attributed to either in-service degradation or variations in material properties from production variations. Lastly, results from indenter modulus measurements and Fourier transform infrared spectroscopy suggest possible markers that could be beneficial in monitoring cable conditions.« less

  9. Mechanical and Chemical Properties of Harvested Hypalon Cable Jacket Subjected to Accelerated Thermal Aging

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Duckworth, Robert C.; Kidder, Michelle K.; Aytug, Tolga

    We report that for nuclear power plants (NPPs) considering second license renewal for operation beyond 60 years, knowledge of long-term operation, condition monitoring, and viability for the reactor components including reactor pressure vessel, concrete structures, and cable systems is essential. Such knowledge will provide NPP owners/operators with a basis for predicting performance and estimating the costs associated with monitoring or replacement programs for the affected systems. For cable systems that encompass a wide variety of materials, manufacturers, and in-plant locations, accelerated aging of harvested cable jacket and insulation can provide insight into a remaining useful life and methods for monitoring.more » Accelerated thermal aging in air at temperatures between 80°C and 120°C was conducted on a multiconductor control rod drive mechanism cable manufactured by Boston Insulated Wire (BIW). The cable, which had been in service for over 30 years, was jacketed with Hypalon and insulated with ethylene propylene rubber. From elongation at break (EAB) measurements and supporting Arrhenius analysis of the jacket material, an activation energy of 97.84 kJ/mol was estimated, and the time to degradation, as represented by 50% EAB at the expected maximum operating temperature of 45°C, was estimated to be 80 years. These values were slightly below previous measurements on similar BIW Hypalon cable jacket and could be attributed to either in-service degradation or variations in material properties from production variations. Lastly, results from indenter modulus measurements and Fourier transform infrared spectroscopy suggest possible markers that could be beneficial in monitoring cable conditions.« less

  10. A Comparison Study of Offshore Wind Support Structures with Monopiles and Jackets for U.S. Waters: Preprint

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Damiani, Rick; Dykes, Katherine; Scott, George

    2016-08-01

    U.S. experience in offshore wind is limited, and high costs are expected unless innovations are introduced in one or multiple aspects of the project, from the installed technology to the balance of system (BOS). The substructure is the main single component responsible for the BOS capital expenditure (CapEx) and thus one that, if improved, could yield significant levelized cost of energy (LCOE) savings. For projects in U.S. waters, multimember, lattice structures (also known as jackets) can render required stiffness for transitional water depths at potentially lower costs than monopiles (MPs). In this study, we used a systems engineering approach tomore » evaluate the LCOE of prototypical wind power plants at six locations along the eastern seaboard and the Gulf of Mexico for both types of support structures. Using a reference wind turbine and actual metocean conditions for the selected sites, we calculated loads for a parked and an operational situation, and we optimized the MP- and jacket-based support structures to minimize their overall mass. Using a suite of cost models, we then computed their associated LCOE. For all water depths, the MP-based configurations were heavier than their jacket counterparts, but the overall costs for the MPs were less than they were for jackets up to depths of slightly less than 30 m. When the associated manufacturing and installation costs were included, jackets resulted in lower LCOE for depths greater than 40 m. These results can be used by U.S. stakeholders to understand the potential for different technologies at different sites, but the methodology illustrated in this study can be further employed to analyze the effects of innovations and design choices throughout wind power plant systems.« less

  11. Natural frequency and vibration analysis of jacket type foundation for offshore wind power

    NASA Astrophysics Data System (ADS)

    Hung, Y.-C.; Chang, Y.-Y.; Chen, S.-Y.

    2017-12-01

    There are various types of foundation structure for offshore wind power, engineers may assess the condition of ocean at wind farm, and arrange the transportation, installation of each structure members, furthermore, considering the ability of manufacture steel structure as well, then make an optimum design. To design jacket offshore structure, unlike onshore cases, offshore structure also need to estimate the wave excitation effect. The aim of this paper is to study the difference of natural frequency between different kinds of structural stiffness and discuss the effect of different setting of boundary condition during analysis, besides, compare this value with the natural frequency of sea wave, in order to avoid the resonance effect. In this paper, the finite element analysis software ABAQUS is used to model and analyze the natural vibration behavior of the jacket structure.

  12. Control of heat transfer in continuous-feeding Czochralski-silicon crystal growth with a water-cooled jacket

    NASA Astrophysics Data System (ADS)

    Zhao, Wenhan; Liu, Lijun

    2017-01-01

    The continuous-feeding Czochralski method is an effective method to reduce the cost of single crystal silicon. By promoting the crystal growth rate, the cost can be reduced further. However, more latent heat will be released at the melt-crystal interface under a high crystal growth rate. In this study, a water-cooled jacket was applied to enhance the heat transfer at the melt-crystal interface. Quasi-steady-state numerical calculation was employed to investigate the impact of the water-cooled jacket on the heat transfer at the melt-crystal interface. Latent heat released during the crystal growth process at the melt-crystal interface and absorbed during feedstock melting at the feeding zone was modeled in the simulations. The results show that, by using the water-cooled jacket, heat transfer in the growing crystal is enhanced significantly. Melt-crystal interface deflection and thermal stress increase simultaneously due to the increase of radial temperature at the melt-crystal interface. With a modified heat shield design, heat transfer at the melt-crystal interface is well controlled. The crystal growth rate can be increased by 20%.

  13. Covalent immobilization of metal organic frameworks onto chemical resistant poly(ether ether ketone) jacket for stir bar extraction.

    PubMed

    Wang, Chenlu; Zhou, Wei; Liao, Xiaoyan; Wang, Xuemei; Chen, Zilin

    2018-09-26

    Preparation of stir bar extraction (SBSE) device with high physical and chemical stability is important and challenging by date. A novel poly (ether ether ketone) (PEEK) tube with excellent mechanical property and chemical stability was firstly used as jacket of metal bar for preparation of stir bar. By employing covalent modification method, the inherent chemical resistant problem of PEEK which restricts the modification of sorbents was well solved. After functionalization, plenty of benzoic acid groups were formed onto the PEEK jacket. Metal organic frameworks of aluminium-based Materials of Institute Lavoisier-68 (MIL-68) was in situ immobilized onto the PEEK surface (MIL-68@PEEK) by the bonding with benzoic acid groups. Afterwards, a facile dumbbell-shaped structure was designed for reducing the friction between sorbents and bottom of container. Due to superior property of the PEEK jacket and the covalent modification method, the MIL-68 modified PEEK jacket SBSE device showed good robustness. After coupling with HPLC-MS/MS, the MIL-68@PEEK-based SBSE device was used to analyse of three parabens including methyl paraben, ethyl paraben and propyl paraben. The method had low limit detection up to 1 pg mL -1 with good linearity (R 2  ≥ 0.9978) and good reproducibility (relative standard deviation ≤ 9.74%). The method has been applied to the detection of parabens in cosmetics and rabbit plasma after painted with cosmetics with recoveries between 73.25% and 104.23%. Copyright © 2018 Elsevier B.V. All rights reserved.

  14. 46 CFR 180.72 - Personal flotation devices carried in addition to life jackets.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Personal flotation devices carried in addition to life jackets. 180.72 Section 180.72 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL... emergencies. (b) Wearable marine buoyant devices that include “ski vests,” “boating vests,” and “fishing vests...

  15. 46 CFR 180.72 - Personal flotation devices carried in addition to life jackets.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Personal flotation devices carried in addition to life jackets. 180.72 Section 180.72 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL... emergencies. (b) Wearable marine buoyant devices that include “ski vests,” “boating vests,” and “fishing vests...

  16. Discharge lamp with reflective jacket

    DOEpatents

    MacLennan, Donald A.; Turner, Brian P.; Kipling, Kent

    2001-01-01

    A discharge lamp includes an envelope, a fill which emits light when excited disposed in the envelope, a source of excitation power coupled to the fill to excite the fill and cause the fill to emit light, and a reflector disposed around the envelope and defining an opening, the reflector being configured to reflect some of the light emitted by the fill back into the fill while allowing some light to exit through the opening. The reflector may be made from a material having a similar thermal index of expansion as compared to the envelope and which is closely spaced to the envelope. The envelope material may be quartz and the reflector material may be either silica or alumina. The reflector may be formed as a jacket having a rigid structure which does not adhere to the envelope. The lamp may further include an optical clement spaced from the envelope and configured to reflect an unwanted component of light which exited the envelope back into the envelope through the opening in the reflector. Light which can be beneficially recaptured includes selected wavelength regions, a selected polarization, and selected angular components.

  17. 46 CFR 185.730 - Servicing of inflatable liferafts, inflatable buoyant apparatus, inflatable life jackets, and...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... inflatable liferaft or inflatable buoyant apparatus must be serviced at a facility specifically approved by... apparatus, inflatable life jackets, and inflated rescue boats. 185.730 Section 185.730 Shipping COAST GUARD... Operational Readiness, Maintenance, and Inspection of Lifesaving Equipment § 185.730 Servicing of inflatable...

  18. 46 CFR 185.730 - Servicing of inflatable liferafts, inflatable buoyant apparatus, inflatable life jackets, and...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... inflatable liferaft or inflatable buoyant apparatus must be serviced at a facility specifically approved by... apparatus, inflatable life jackets, and inflated rescue boats. 185.730 Section 185.730 Shipping COAST GUARD... Operational Readiness, Maintenance, and Inspection of Lifesaving Equipment § 185.730 Servicing of inflatable...

  19. Vacuum jacketed composite propulsion feedlines for cryogenic launch and space vehicles, volume 1. [development of glass fiber composite for strength and protection from handling damage

    NASA Technical Reports Server (NTRS)

    Spond, D. E.; Laintz, D. J.; Hall, C. A.; Dulaigh, D. E.

    1974-01-01

    Thin metallic liners that provide leak-free service in cryogenic propulsion systems are overwrapped with a glass-fiber composite that provides strength and protection from handling damage. The resultant tube is lightweight, strong, and has a low thermal flux. The inside commodity flow line and the outside vacuum jacket were fabricated using this method. Several types of vacuum jackets were fabricated and tested at operating temperatures from 294 to 21 K (+70 to minus 423 F) and operating pressure up to 69 N/cm2 (100 psi). The primary objective of the program was to develop vacuum jacket concepts, using previously developed concepts for the inner line. All major program objectives were met resulting in a design concept that is adaptable to a wide range of aerospace vehicle requirements. Major items of development included convolution of thin metallic sections up to 46 cm (18 in.) in diameter, design and fabrication of an extremely lightweight tension membrane concept for the vacuum jacket, and analytical tools that predict the failure mode and levels.

  20. 46 CFR 122.730 - Servicing of inflatable liferafts, inflatable buoyant apparatus, inflatable life jackets, and...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Inspection of Lifesaving Equipment § 122.730 Servicing of inflatable liferafts, inflatable buoyant apparatus... apparatus must be serviced at a facility specifically approved by the Commandant for the particular brand... apparatus, inflatable life jackets, and inflated rescue boats. 122.730 Section 122.730 Shipping COAST GUARD...

  1. 46 CFR 122.730 - Servicing of inflatable liferafts, inflatable buoyant apparatus, inflatable life jackets, and...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Inspection of Lifesaving Equipment § 122.730 Servicing of inflatable liferafts, inflatable buoyant apparatus... apparatus must be serviced at a facility specifically approved by the Commandant for the particular brand... apparatus, inflatable life jackets, and inflated rescue boats. 122.730 Section 122.730 Shipping COAST GUARD...

  2. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lampropoulos, A. P.; Dritsos, S. E.

    In this study, the technique of seismic strengthening existing reinforced concrete columns and beams using additional concrete layers and jackets is examined. The finite element method and the finite element program ATENA is used in this investigation. When a reinforced jacket or layer is being constructed around a column it is already preloaded due to existing service loads. This effect has been examined for different values of the axial load normalized to the strengthened column. The techniques of strengthening with a concrete jacket or a reinforced concrete layer on the compressive side of the column are examined. Another phenomenon thatmore » is examined in this study is the shrinkage of the new concrete of an additional layer used to strengthen an existing member. For this investigation, a simply supported beam with an additional reinforced concrete layer on the tensile side is examined. The results demonstrate that the effect of preloading is important when a reinforced concrete layer is being used with shear connectors between the old and the new reinforcement. It was also found that the shrinkage of the new concrete reduces the strength of the strengthened beam and induces an initial sliding between the old and the new concrete.« less

  3. Ionizing radiation effects on ISS ePTFE jacketed cable assembly

    NASA Astrophysics Data System (ADS)

    Koontz, S. L.; Golden, J. L.; Lorenz, M. J.; Pedley, M. D.

    2003-09-01

    Polytetrafluoroethylene (PTFE), which is susceptible to embrittlement by ionizing radiation, is used as a primary material in the Mobile Transporter's (MT) Trailing Umbilical System (TUS) cable on the International Space Station (ISS). The TUS cable provides power and data service between the ISS truss and the MT. The TUS cable is normally stowed in an uptake reel and is fed out to follow the MT as it moves along rails on the ISS truss structure. For reliable electrical and mechanical performance, TUS cable polymeric materials must be capable of >3.5% elongation without cracking or breaking. The MT TUS cable operating temperature on ISS is expected to range between -100°C and +130°C. The on-orbit functional life requirement for the MT TUS cable is 10 years. Analysis and testing were performed to verify that the MT TUS cable would be able to meet full-life mechanical and electrical performance requirements, despite progressive embrittlement by the natural ionizing radiation environment. Energetic radiation belt electrons (trapped electrons) are the principal contributor to TUS cable radiation dose. TUS cable specimens were irradiated, in vacuum, with both energetic electrons and gamma rays. Electron beam energy was chosen to minimize charging effects on the non-conductive ePTFE (expanded PTFE) targets. Tensile testing was then performed, over the expected range of operating temperatures, as a function of radiation dose. When compared to the expected in-flight radiation dose/depth profile, atomic oxygen (AO) erosion of the radiation damaged TUS cable jacket surfaces is more rapid than the development of radiation induced embrittlement of the same surfaces. Additionally, the layered construction of the jacket prevents crack growth propagation, leaving the inner layer material compliant with the design elongation requirements. As a result, the TUS cable insulation design was verified to meet performance life requirements.

  4. Inconsistency in 9 mm bullets: correlation of jacket thickness to post-impact geometry measured with non-destructive X-ray computed tomography.

    PubMed

    Thornby, John; Landheer, Dirk; Williams, Tim; Barnes-Warden, Jane; Fenne, Paul; Norman, Danielle G; Attridge, Alex; Williams, Mark A

    2014-01-01

    Fundamental to any ballistic armour standard is the reference projectile to be defeated. Typically, for certification purposes, a consistent and symmetrical bullet geometry is assumed, however variations in bullet jacket dimensions can have far reaching consequences. Traditionally, characteristics and internal dimensions have been analysed by physically sectioning bullets--an approach which is of restricted scope and which precludes subsequent ballistic assessment. The use of a non-destructive X-ray computed tomography (CT) method has been demonstrated and validated (Kumar et al., 2011 [15]); the authors now apply this technique to correlate bullet impact response with jacket thickness variations. A set of 20 bullets (9 mm DM11) were selected for comparison and an image-based analysis method was employed to map jacket thickness and determine the centre of gravity of each specimen. Both intra- and inter-bullet variations were investigated, with thickness variations of the order of 200 μm commonly found along the length of all bullets and angular variations of up to 50 μm in some. The bullets were subsequently impacted against a rigid flat plate under controlled conditions (observed on a high-speed video camera) and the resulting deformed projectiles were re-analysed. The results of the experiments demonstrate a marked difference in ballistic performance between bullets from different manufacturers and an asymmetric thinning of the jacket is observed in regions of pre-impact weakness. The conclusions are relevant for future soft armour standards and provide important quantitative data for numerical model correlation and development. The implications of the findings of the work on the reliability and repeatability of the industry standard V50 ballistic test are also discussed. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  5. Experimental Characterization and Modeling of Thermal Contact Resistance of Electric Machine Stator-to-Cooling Jacket Interface Under Interference Fit Loading

    DOE PAGES

    Cousineau, Justine Emily; Bennion, Kevin S.; Chieduko, Victor; ...

    2018-05-08

    Cooling of electric machines is a key to increasing power density and improving reliability. This paper focuses on the design of a machine using a cooling jacket wrapped around the stator. The thermal contact resistance (TCR) between the electric machine stator and cooling jacket is a significant factor in overall performance and is not well characterized. This interface is typically an interference fit subject to compressive pressure exceeding 5 MPa. An experimental investigation of this interface was carried out using a thermal transmittance setup using pressures between 5 and 10 MPa. Furthermore, the results were compared to currently available modelsmore » for contact resistance, and one model was adapted for prediction of TCR in future motor designs.« less

  6. Experimental Characterization and Modeling of Thermal Contact Resistance of Electric Machine Stator-to-Cooling Jacket Interface Under Interference Fit Loading

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cousineau, Justine Emily; Bennion, Kevin S.; Chieduko, Victor

    Cooling of electric machines is a key to increasing power density and improving reliability. This paper focuses on the design of a machine using a cooling jacket wrapped around the stator. The thermal contact resistance (TCR) between the electric machine stator and cooling jacket is a significant factor in overall performance and is not well characterized. This interface is typically an interference fit subject to compressive pressure exceeding 5 MPa. An experimental investigation of this interface was carried out using a thermal transmittance setup using pressures between 5 and 10 MPa. Furthermore, the results were compared to currently available modelsmore » for contact resistance, and one model was adapted for prediction of TCR in future motor designs.« less

  7. Dispersion Strengthening.

    DTIC Science & Technology

    1987-07-27

    June 1979. 22. p - V S~* ~~ " 17. " Strengthening Mechanisms in Martensitic Steels ", Peking University Institute for Iron and Steel Technology...directed towards studying the strengthening behavior of nickel-base superalloys, the strengthening behavior of ferrous martensite , and the kinetics of...coherency strain is not a dominant strengthening mechanism in nickel-base super- alloys with low volume fractions of -y The important conclusions

  8. Experimental duplication of the important physical evidence of the lapel bulge of the jacket worn by Governor Connally when bullet 399 went through him.

    PubMed

    Lattimer, J K; Laidlaw, A; Heneghan, P; Haubner, E J

    1994-05-01

    By duplicating the wound to the neck of President Kennedy, which caused bullet 399 to turn sideways, and having it then hit a Connally-type rib cage with shirt and jacket, we reproduced the right-sided bulge of the jacket worn by Connally, with lapel eversion, which is so significant in frame 224. The extensive damage to his shirtfront was from the hail of rib fragments and soft tissue, exactly as described with his own shirt. Our tumbling bullet then went on to fracture a radius and be recovered intact except that it was somewhat flattened and bent and had lead extruded from the rear, as did bullet 399. Fragments of this lead were scraped off on the ragged bone-ends of some of our fractured radiuses, just as with Governor Connally's radius. It is believed that this duplication of the jacket and lapel bulge of Governor Connally, which occurred dependably, when we reproduced the circumstances at Dallas, confirmed this very important detail in this technical demonstration of the findings in the shooting of President Kennedy and Governor Connally. The bulge and the lapel eversion of the jacket worn by Governor Connally, starting in Zapruder frame 224, does indeed establish, beyond any shadow of a doubt, the exact moment when bullet 399 went through him. The right arms of both men were seen to react simultaneously, immediately thereafter. It also permits us to establish that there was plenty of time (three and one-half seconds) between the first two shots (frames 160 to 224) and even more time (five seconds) between the last two shots (frames 224 to 313), for Oswald to reload, reacquire his target (the head of President Kennedy) plus two full seconds to lock onto it. If the bullet does not traverse the neck of President Kennedy, it does not cause Governor Connally's jacket and lapel to bulge. The lapel bulge is a very important bit of actual physical evidence in establishing the fact that one bullet hit both men and that Oswald had plenty of time to hit the President

  9. Development of jacket platform tsunami risk rating system in waters offshore North Borneo

    NASA Astrophysics Data System (ADS)

    Lee, H. E.; Liew, M. S.; Mardi, N. H.; Na, K. L.; Toloue, Iraj; Wong, S. K.

    2016-09-01

    This work details the simulation of tsunami waves generated by seaquakes in the Manila Trench and their effect on fixed oil and gas jacket platforms in waters offshore North Borneo. For this study, a four-leg living quarter jacket platform located in a water depth of 63m is modelled in SACS v5.3. Malaysia has traditionally been perceived to be safe from the hazards of earthquakes and tsunamis. Local design practices tend to neglect tsunami waves and include no such provisions. In 2004, a 9.3 M w seaquake occurred off the northwest coast of Aceh, which generated tsunami waves that caused destruction in Malaysia totalling US 25 million and 68 deaths. This event prompted an awareness of the need to study the reliability of fixed offshore platforms scattered throughout Malaysian waters. In this paper, we present a review of research on the seismicity of the Manila Trench, which is perceived to be high risk for Southeast Asia. From the tsunami numerical model TUNA-M2, we extract computer-simulated tsunami waves at prescribed grid points in the vicinity of the platforms in the region. Using wave heights as input, we simulate the tsunami using SACS v5.3 structural analysis software of offshore platforms, which is widely accepted by the industry. We employ the nonlinear solitary wave theory in our tsunami loading calculations for the platforms, and formulate a platform-specific risk quantification system. We then perform an intensive structural sensitivity analysis and derive a corresponding platform-specific risk rating model.

  10. Doing Research in a Professional Development School and Why I Feel like Houdini in a Straight Jacket

    ERIC Educational Resources Information Center

    Neapolitan, Jane

    2004-01-01

    When the author was a little girl, her father told her the story of how he once saw the great Harry Houdini escape from a straight jacket. In the early 1900s, Houdini fascinated thousands of people by performing feats of life-threatening daring and agility. Houdini was a professional in the traditional sense: he acted alone, kept his trade secrets…

  11. Physiological Evaluation of A1 (Extreme-Cold-Weather) and A2 (Buoyant, Intermediate-Cold-Weather) Jackets.

    DTIC Science & Technology

    1983-08-01

    the resting metabolic heat will be dissipated through the clothing with the remaining 25% lost through the respiratory tract and insensible sweating...AD-A258 410 PHYSIOLOGICAL EVALUATION OF Al (EXTREME-COLD-WEATHER) AND A2 (BUOYANT, INTERMEDIATE-COLD-WEATHER) JACKETS NAVY CLOTHING AND TEXTILE...Navy Clothing and Textile Research Facility 523-003-30-06 21 Strathmore Road 523-003-30-08 Natick, MA 01760 11. CONTROLLING OFFICE NAME AND ADDRESS

  12. Effects of defeathering and insulative jackets on production by laying hens at low temperatures.

    PubMed

    Gonyou, H W; Morrison, W D

    1983-07-01

    Exposure to a temperature of 5 degrees C compared with 20 degrees C resulted in a 20.5% increase in food consumption and an 18.8% decrease in efficiency of food utilisation with intermediate values resulting from exposure to 10 degrees C and 15 degrees C. Removal of feathers from the neck, back and (or) breast resulted in a 5 to 6% increase in food consumption. The effects of feather removal and temperature on food consumption were additive. Cloth jackets effectively insulated the back and breast areas when feathers had been removed but also resulted in increased food intake and lower efficiency.

  13. Condition assessment and determination of methods for evaluating corrosion damage in piles encapsulated in protective jackets on the Hampton Roads Bridge-Tunnel.

    DOT National Transportation Integrated Search

    2010-04-01

    The primary purpose of this study was to assess the condition of piles that had been encapsulated in fiberglass and mortar jackets on four bridges that are part of the Hampton Roads Bridge-Tunnel (HRBT). Since these four bridges contain a total of ap...

  14. FRP : Strengthened RC Structures

    NASA Astrophysics Data System (ADS)

    Teng, J. G.; Chen, J. F.; Smith, S. T.; Lam, L.

    2002-01-01

    The strengthening of reinforced concrete (RC) structures using advanced fibre-reinforced polymer (FRP) composites, and in particular the behaviour of FRP-strengthened RC structures is a topic which has become very popular in recent years. This popularity has arisen due to the need to maintain and upgrade essential infrastructure in all parts of the world, combined with the well-known advantages of FRP composites, such as good corrosion resistance and ease for site handling due to their light weight. The continuous reduction in the material cost of FRP composites has also contributed to their popularity. While a great amount of research now exists in the published literature on this topic, it is scattered in various journals and conference proceedings. This book therefore provides the first ever comprehensive, state-of-the-art summary of the existing research on FRP strengthening of RC structures, with the emphasis being on structural behaviour and strength models. The main topics covered include: Bond behaviour Flexural and shear strengthening of beams Column strengthening Flexural strengthening of slabs. For each area, the methods of strengthening are discussed, followed by a description of behaviour and failure modes and then the presentation of rational design recommendations, for direct use in practical design of FRP strengthening measures. Researchers, practicing engineers, code writers and postgraduate students in structural engineering and construction materials, as well as consulting firms, government departments, professional bodies, contracting firms and FRP material suppliers will find this an invaluable resource.

  15. The influence of curvature configuration on the characteristic of alcohol gel insertion jacket of polymer optical fiber liquid level sensor

    NASA Astrophysics Data System (ADS)

    Arumnika, N.; Kuswanto, H.

    2018-04-01

    This study aimed to determine the effect of curvature configuration to sensitivities and linearities of Polymer Optical Fiber (POF) water level sensor. POF type SH-4001-1.3 has been used in this study. The jacket of POF of 20 cm was removed. Transparent piped inserted by alcohol gel has been used to replace the jacket. This is head of a sensor. The head of a sensor is curved with variations of the specified path length, peel length, the width of curvature, the height of curvature and waveform. Configuration A (20 cm, 34 cm, 6 cm, 2 cm, 1 wave), configuration B (20 cm, 34 cm, 8 cm, 2 cm, 1 wave), configuration C (20 cm, 34 cm, 9 cm, 2 cm, ½ wave), configuration D (20 cm, 34 cm, 10 cm, 2 cm, ½ wave). The head of a sensor inserted into the water tank. The light source inserted to one end POF is a He-Ne laser light with a power of 5 mW and a wavelength of 632.8 nm. Power output at the other end received by the Optical Power Meter (OPM). The curvature configuration the head sensor of POF affects the output. Configuration A has good sensitivity, however good linearity given by configuration.

  16. Posterolateral hip muscle strengthening versus quadriceps strengthening for patellofemoral pain: a comparative control trial.

    PubMed

    Khayambashi, Khalil; Fallah, Alireza; Movahedi, Ahmadreza; Bagwell, Jennifer; Powers, Christopher

    2014-05-01

    To compare the efficacy of posterolateral hip muscle strengthening versus quadriceps strengthening in reducing pain and improving health status in persons with patellofemoral pain (PFP). Comparative control trial. Rehabilitation facility. Persons with a diagnosis of PFP (N=36; 18 men, 18 women). Patients were alternately assigned to a posterolateral hip muscle strengthening group (9 men and 9 women) or a quadriceps strengthening group (9 men and 9 women). The posterolateral hip muscle strengthening group performed hip abductor and external rotator strengthening exercises, whereas the quadriceps strengthening group performed quadriceps strengthening exercises (3 times a week for 8wk). Pain (visual analog scale [VAS]) and health status (Western Ontario McMaster Universities Osteoarthritis Index [WOMAC]) were assessed at baseline, postintervention, and 6-month follow-up. Significant improvements in VAS and WOMAC scores were observed in both groups from baseline to postintervention and baseline to 6-month follow-up (P<.001). Improvements in VAS and WOMAC scores in the posterolateral hip exercise group were superior to those in the quadriceps exercise group postintervention and at 6-month follow-up (P<.05). Although both intervention programs resulted in decreased pain and improved function in persons with PFP, outcomes in the posterolateral hip exercise group were superior to the quadriceps exercise group. The superior outcomes obtained in the posterolateral hip exercise group were maintained 6 months postintervention. Copyright © 2014 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  17. Effect of confining pressure due to external jacket of steel plate or shape memory alloy wire on bond behavior between concrete and steel reinforcing bars.

    PubMed

    Choi, Eunsoo; Kim, Dongkyun; Park, Kyoungsoo

    2014-12-01

    For external jackets of reinforced concrete columns, shape memory alloy (SMA) wires are easy to install, and they provide active and passive confining pressure; steel plates, on the other hand, only provide passive confining pressure, and their installation on concrete is not convenient because of the requirement of a special device. To investigate how SMA wires distinctly impact bond behavior compared with steel plates, this study conducted push-out bond tests of steel reinforcing bars embedded in concrete confined by SMA wires or steel plates. For this purpose, concrete cylinders were prepared with dimensions of 100 mm x 200 mm, and D-22 reinforcing bars were embedded at the center of the concrete cylinders. External jackets of 1.0 mm and 1.5 mm thickness steel plates were used to wrap the concrete cylinders. Additionally, NiTiNb SMA wire with a diameter of 1.0 mm was wound around the concrete cylinders. Slip of the reinforcing bars due to pushing force was measured by using a displacement transducer, while the circumferential deformation of specimens was obtained by using an extensometer. The circumferential deformation was used to calculate the circumferential strains of the specimens. This study assessed the radial confining pressure due to the external jackets on the reinforcing bars at bond strength from bond stress-slip curves and bond stress-circumferential strain curves. Then, the effects of the radial confining pressure on the bond behavior of concrete are investigated, and an equation is suggested to estimate bond strength using the radial confining pressure. Finally, this study focused on how active confining pressure due to recovery stress of the SMA wires influences bond behavior.

  18. H∞ memory feedback control with input limitation minimization for offshore jacket platform stabilization

    NASA Astrophysics Data System (ADS)

    Yang, Jia Sheng

    2018-06-01

    In this paper, we investigate a H∞ memory controller with input limitation minimization (HMCIM) for offshore jacket platforms stabilization. The main objective of this study is to reduce the control consumption as well as protect the actuator when satisfying the requirement of the system performance. First, we introduce a dynamic model of offshore platform with low order main modes based on mode reduction method in numerical analysis. Then, based on H∞ control theory and matrix inequality techniques, we develop a novel H∞ memory controller with input limitation. Furthermore, a non-convex optimization model to minimize input energy consumption is proposed. Since it is difficult to solve this non-convex optimization model by optimization algorithm, we use a relaxation method with matrix operations to transform this non-convex optimization model to be a convex optimization model. Thus, it could be solved by a standard convex optimization solver in MATLAB or CPLEX. Finally, several numerical examples are given to validate the proposed models and methods.

  19. Strengthening Families: Community Strategies That Work

    ERIC Educational Resources Information Center

    Olson, Maril

    2007-01-01

    Supporting and strengthening families has always been part of the early childhood professional's unique role in the community. NAEYC's Supporting Teachers, Strengthening Families initiative (www.naeyc.org/ece/supporting) is a set of activities designed to provide intentional leadership and education in the family-strengthening approach. The…

  20. Strengthening bridges using composite materials.

    DOT National Transportation Integrated Search

    1998-03-01

    The objective of this research project is to outline methodologies for using Fiber Reinforced Polymer (FRP) composites to strengthen and rehabilitate reinforced concrete bridge elements. : Infrastructure deterioration and bridge strengthening techniq...

  1. Structural Assessment of Externally Strengthened Bridge Deck Panels

    NASA Astrophysics Data System (ADS)

    Sim, Jongsung; Oh, Hongseob; Meyer, Christian

    2006-03-01

    Deteriorated concrete bridge decks are strengthened with external bonding technique using either steel plate or various FRPs to enhance the decreased load carrying capacity and serviceability. But the failure characteristics of bridge decks strengthened with various materials can be changed according to mechanical properties of strengthening materials or strengthening scheme as well as the strengthening amount. In this paper, strengthening effect of deck strengthened with carbon fiber sheets, glass fiber sheets or steel plates is compared. And the theoretical load carrying capacity are evaluated using yield line theory and punching shear model properly modified for the strengthened RC member. The panels strengthened with sheet type FRP materials failed more often in a ductile mode, indicating that the failure developed after the rebar yielded.

  2. 27 CFR 44.245 - Strengthening bond.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2014-04-01 2014-04-01 false Strengthening bond. 44.245....245 Strengthening bond. Where the appropriate TTB officer determines that the amount of the bond... appropriate TTB officer may require the proprietor to file a strengthening bond in an appropriate amount with...

  3. 27 CFR 44.245 - Strengthening bond.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Strengthening bond. 44.245....245 Strengthening bond. Where the appropriate TTB officer determines that the amount of the bond... appropriate TTB officer may require the proprietor to file a strengthening bond in an appropriate amount with...

  4. 27 CFR 44.245 - Strengthening bond.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2012-04-01 2011-04-01 true Strengthening bond. 44.245....245 Strengthening bond. Where the appropriate TTB officer determines that the amount of the bond... appropriate TTB officer may require the proprietor to file a strengthening bond in an appropriate amount with...

  5. 27 CFR 44.245 - Strengthening bond.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2013-04-01 2013-04-01 false Strengthening bond. 44.245....245 Strengthening bond. Where the appropriate TTB officer determines that the amount of the bond... appropriate TTB officer may require the proprietor to file a strengthening bond in an appropriate amount with...

  6. 27 CFR 44.245 - Strengthening bond.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2011-04-01 2011-04-01 false Strengthening bond. 44.245....245 Strengthening bond. Where the appropriate TTB officer determines that the amount of the bond... appropriate TTB officer may require the proprietor to file a strengthening bond in an appropriate amount with...

  7. Madness Decolonized?: Madness as Transnational Identity in Gail Hornstein's Agnes's Jacket.

    PubMed

    Miller, Gavin

    2017-02-13

    The US psychologist Gail Hornstein's monograph, Agnes's Jacket: A Psychologist's Search for the Meanings of Madness (2009), is an important intervention in the identity politics of the mad movement. Hornstein offers a resignified vision of mad identity that embroiders the central trope of an "anti-colonial" struggle to reclaim the experiential world "colonized" by psychiatry. A series of literal and figurative appeals makes recourse to the inner world and (corresponding) cultural world of the mad as well as to the ethno-symbolic cultural materials of dormant nationhood. This rhetoric is augmented by a model in which the mad comprise a diaspora without an origin, coalescing into a single transnational community. The mad are also depicted as persons displaced from their metaphorical homeland, the "inner" world "colonized" by the psychiatric regime. There are a number of difficulties with Hornstein's rhetoric, however. Her "ethnicity-and-rights" response to the oppression of the mad is symptomatic of Western parochialism, while her proposed transmutation of putative psychopathology from limit upon identity to parameter of successful identity is open to contestation. Moreover, unless one accepts Hornstein's porous vision of mad identity, her self-ascribed insider status in relation to the mad community may present a problematic "re-colonization" of mad experience.

  8. 27 CFR 17.107 - Strengthening bonds.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Strengthening bonds. 17... PRODUCTS Bonds and Consents of Sureties § 17.107 Strengthening bonds. Whenever the amount of a bond on file and in effect becomes insufficient, the principal may give a strengthening bond in a sufficient amount...

  9. 27 CFR 26.69 - Strengthening bonds.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Strengthening bonds. 26.69... Liquors and Articles in Puerto Rico Bonds § 26.69 Strengthening bonds. In all cases where the penal sum of any bond becomes insufficient, the principal shall either give a strengthening bond with the same...

  10. 27 CFR 26.69 - Strengthening bonds.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Strengthening bonds. 26.69... Liquors and Articles in Puerto Rico Bonds § 26.69 Strengthening bonds. In all cases where the penal sum of any bond becomes insufficient, the principal shall either give a strengthening bond with the same...

  11. 27 CFR 40.405 - Strengthening bond.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2012-04-01 2011-04-01 true Strengthening bond. 40.405... § 40.405 Strengthening bond. Where the appropriate TTB officer determines that the amount of the bond... a strengthening bond in an appropriate amount with the same surety as that on the bond already in...

  12. 27 CFR 17.107 - Strengthening bonds.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Strengthening bonds. 17... PRODUCTS Bonds and Consents of Sureties § 17.107 Strengthening bonds. Whenever the amount of a bond on file and in effect becomes insufficient, the principal may give a strengthening bond in a sufficient amount...

  13. 27 CFR 19.246 - Strengthening bonds.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Strengthening bonds. 19... Strengthening bonds. In all cases when the penal sum of any bond becomes insufficient, the principal shall either give a strengthening bond with the same surety to attain a sufficient penal sum, or give a new...

  14. 27 CFR 26.69 - Strengthening bonds.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Strengthening bonds. 26.69... Liquors and Articles in Puerto Rico Bonds § 26.69 Strengthening bonds. In all cases where the penal sum of any bond becomes insufficient, the principal shall either give a strengthening bond with the same...

  15. 27 CFR 17.107 - Strengthening bonds.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Strengthening bonds. 17... PRODUCTS Bonds and Consents of Sureties § 17.107 Strengthening bonds. Whenever the amount of a bond on file and in effect becomes insufficient, the principal may give a strengthening bond in a sufficient amount...

  16. 27 CFR 17.107 - Strengthening bonds.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Strengthening bonds. 17... PRODUCTS Bonds and Consents of Sureties § 17.107 Strengthening bonds. Whenever the amount of a bond on file and in effect becomes insufficient, the principal may give a strengthening bond in a sufficient amount...

  17. 27 CFR 26.69 - Strengthening bonds.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Strengthening bonds. 26.69... Liquors and Articles in Puerto Rico Bonds § 26.69 Strengthening bonds. In all cases where the penal sum of any bond becomes insufficient, the principal shall either give a strengthening bond with the same...

  18. 27 CFR 40.405 - Strengthening bond.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Strengthening bond. 40.405... § 40.405 Strengthening bond. Where the appropriate TTB officer determines that the amount of the bond... a strengthening bond in an appropriate amount with the same surety as that on the bond already in...

  19. 27 CFR 17.107 - Strengthening bonds.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Strengthening bonds. 17... PRODUCTS Bonds and Consents of Sureties § 17.107 Strengthening bonds. Whenever the amount of a bond on file and in effect becomes insufficient, the principal may give a strengthening bond in a sufficient amount...

  20. 27 CFR 40.405 - Strengthening bond.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2013-04-01 2013-04-01 false Strengthening bond. 40.405... § 40.405 Strengthening bond. Where the appropriate TTB officer determines that the amount of the bond... a strengthening bond in an appropriate amount with the same surety as that on the bond already in...

  1. 27 CFR 40.405 - Strengthening bond.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2011-04-01 2011-04-01 false Strengthening bond. 40.405... § 40.405 Strengthening bond. Where the appropriate TTB officer determines that the amount of the bond... a strengthening bond in an appropriate amount with the same surety as that on the bond already in...

  2. 27 CFR 40.405 - Strengthening bond.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2014-04-01 2014-04-01 false Strengthening bond. 40.405... § 40.405 Strengthening bond. Where the appropriate TTB officer determines that the amount of the bond... a strengthening bond in an appropriate amount with the same surety as that on the bond already in...

  3. 27 CFR 24.153 - Strengthening bonds.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Strengthening bonds. 24... Strengthening bonds. In any instance where the penal sum of the bond on file becomes insufficient, the principal shall either give a strengthening bond with the same surety to attain a sufficient penal sum or give a...

  4. 27 CFR 44.124 - Strengthening bond.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2012-04-01 2011-04-01 true Strengthening bond. 44.124... Strengthening bond. Where the appropriate TTB officer determines that the amount of the bond, under which an... proprietor to file a strengthening bond in an appropriate amount with the same surety as that on the bond...

  5. 27 CFR 44.124 - Strengthening bond.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Strengthening bond. 44.124... Strengthening bond. Where the appropriate TTB officer determines that the amount of the bond, under which an... proprietor to file a strengthening bond in an appropriate amount with the same surety as that on the bond...

  6. 27 CFR 28.66 - Strengthening bonds.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Strengthening bonds. 28.66... OF THE TREASURY LIQUORS EXPORTATION OF ALCOHOL Bonds and Consents of Surety § 28.66 Strengthening... give a strengthening bond with the same surety to attain a sufficient penal sum, or give a new bond to...

  7. 27 CFR 24.153 - Strengthening bonds.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Strengthening bonds. 24... Strengthening bonds. In any instance where the penal sum of the bond on file becomes insufficient, the principal shall either give a strengthening bond with the same surety to attain a sufficient penal sum or give a...

  8. 27 CFR 40.135 - Strengthening bond.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2013-04-01 2013-04-01 false Strengthening bond. 40.135... PROCESSED TOBACCO Bonds and Extensions of Coverage of Bonds § 40.135 Strengthening bond. Where the amount of... immediately file a strengthening bond in an appropriate amount with the same surety as that on the bond...

  9. 27 CFR 41.122 - Strengthening bond.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2013-04-01 2013-04-01 false Strengthening bond. 41.122... States Deferred Payment of Tax in Puerto Rico on Tobacco Products § 41.122 Strengthening bond. Where the... shall immediately file a strengthening bond in an appropriate amount with the same surety as that on the...

  10. 27 CFR 41.122 - Strengthening bond.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2014-04-01 2014-04-01 false Strengthening bond. 41.122... States Deferred Payment of Tax in Puerto Rico on Tobacco Products § 41.122 Strengthening bond. Where the... shall immediately file a strengthening bond in an appropriate amount with the same surety as that on the...

  11. 27 CFR 24.153 - Strengthening bonds.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Strengthening bonds. 24... Strengthening bonds. In any instance where the penal sum of the bond on file becomes insufficient, the principal shall either give a strengthening bond with the same surety to attain a sufficient penal sum or give a...

  12. 27 CFR 28.66 - Strengthening bonds.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Strengthening bonds. 28.66... OF THE TREASURY ALCOHOL EXPORTATION OF ALCOHOL Bonds and Consents of Surety § 28.66 Strengthening... give a strengthening bond with the same surety to attain a sufficient penal sum, or give a new bond to...

  13. 27 CFR 28.66 - Strengthening bonds.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Strengthening bonds. 28.66... OF THE TREASURY LIQUORS EXPORTATION OF ALCOHOL Bonds and Consents of Surety § 28.66 Strengthening... give a strengthening bond with the same surety to attain a sufficient penal sum, or give a new bond to...

  14. 27 CFR 41.122 - Strengthening bond.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Strengthening bond. 41.122... States Deferred Payment of Tax in Puerto Rico on Tobacco Products § 41.122 Strengthening bond. Where the... shall immediately file a strengthening bond in an appropriate amount with the same surety as that on the...

  15. 27 CFR 28.66 - Strengthening bonds.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Strengthening bonds. 28.66... OF THE TREASURY ALCOHOL EXPORTATION OF ALCOHOL Bonds and Consents of Surety § 28.66 Strengthening... give a strengthening bond with the same surety to attain a sufficient penal sum, or give a new bond to...

  16. 27 CFR 24.153 - Strengthening bonds.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Strengthening bonds. 24... Strengthening bonds. In any instance where the penal sum of the bond on file becomes insufficient, the principal shall either give a strengthening bond with the same surety to attain a sufficient penal sum or give a...

  17. 27 CFR 41.122 - Strengthening bond.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2011-04-01 2011-04-01 false Strengthening bond. 41.122... States Deferred Payment of Tax in Puerto Rico on Tobacco Products § 41.122 Strengthening bond. Where the... shall immediately file a strengthening bond in an appropriate amount with the same surety as that on the...

  18. 27 CFR 44.124 - Strengthening bond.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2013-04-01 2013-04-01 false Strengthening bond. 44.124... Strengthening bond. Where the appropriate TTB officer determines that the amount of the bond, under which an... proprietor to file a strengthening bond in an appropriate amount with the same surety as that on the bond...

  19. 27 CFR 28.66 - Strengthening bonds.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Strengthening bonds. 28.66... OF THE TREASURY LIQUORS EXPORTATION OF ALCOHOL Bonds and Consents of Surety § 28.66 Strengthening... give a strengthening bond with the same surety to attain a sufficient penal sum, or give a new bond to...

  20. 27 CFR 40.135 - Strengthening bond.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Strengthening bond. 40.135... PROCESSED TOBACCO Bonds and Extensions of Coverage of Bonds § 40.135 Strengthening bond. Where the amount of... immediately file a strengthening bond in an appropriate amount with the same surety as that on the bond...

  1. 27 CFR 24.153 - Strengthening bonds.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Strengthening bonds. 24... Strengthening bonds. In any instance where the penal sum of the bond on file becomes insufficient, the principal shall either give a strengthening bond with the same surety to attain a sufficient penal sum or give a...

  2. 27 CFR 41.122 - Strengthening bond.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2012-04-01 2011-04-01 true Strengthening bond. 41.122... States Deferred Payment of Tax in Puerto Rico on Tobacco Products § 41.122 Strengthening bond. Where the... shall immediately file a strengthening bond in an appropriate amount with the same surety as that on the...

  3. 27 CFR 40.135 - Strengthening bond.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2011-04-01 2011-04-01 false Strengthening bond. 40.135... PROCESSED TOBACCO Bonds and Extensions of Coverage of Bonds § 40.135 Strengthening bond. Where the amount of... immediately file a strengthening bond in an appropriate amount with the same surety as that on the bond...

  4. 27 CFR 40.135 - Strengthening bond.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2014-04-01 2014-04-01 false Strengthening bond. 40.135... PROCESSED TOBACCO Bonds and Extensions of Coverage of Bonds § 40.135 Strengthening bond. Where the amount of... immediately file a strengthening bond in an appropriate amount with the same surety as that on the bond...

  5. 27 CFR 40.135 - Strengthening bond.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2012-04-01 2011-04-01 true Strengthening bond. 40.135... PROCESSED TOBACCO Bonds and Extensions of Coverage of Bonds § 40.135 Strengthening bond. Where the amount of... immediately file a strengthening bond in an appropriate amount with the same surety as that on the bond...

  6. 27 CFR 44.124 - Strengthening bond.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2011-04-01 2011-04-01 false Strengthening bond. 44.124... Strengthening bond. Where the appropriate TTB officer determines that the amount of the bond, under which an... proprietor to file a strengthening bond in an appropriate amount with the same surety as that on the bond...

  7. 27 CFR 44.124 - Strengthening bond.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2014-04-01 2014-04-01 false Strengthening bond. 44.124... Strengthening bond. Where the appropriate TTB officer determines that the amount of the bond, under which an... proprietor to file a strengthening bond in an appropriate amount with the same surety as that on the bond...

  8. Optimisation and evaluation of pre-design models for offshore wind turbines with jacket support structures and their influence on integrated load simulations

    NASA Astrophysics Data System (ADS)

    Schafhirt, S.; Kaufer, D.; Cheng, P. W.

    2014-12-01

    In recent years many advanced load simulation tools, allowing an aero-servo-hydroelastic analyses of an entire offshore wind turbine, have been developed and verified. Nowadays, even an offshore wind turbine with a complex support structure such as a jacket can be analysed. However, the computational effort rises significantly with an increasing level of details. This counts especially for offshore wind turbines with lattice support structures, since those models do naturally have a higher number of nodes and elements than simpler monopile structures. During the design process multiple load simulations are demanded to obtain an optimal solution. In the view of pre-design tasks it is crucial to apply load simulations which keep the simulation quality and the computational effort in balance. The paper will introduce a reference wind turbine model consisting of the REpower5M wind turbine and a jacket support structure with a high level of detail. In total twelve variations of this reference model are derived and presented. Main focus is to simplify the models of the support structure and the foundation. The reference model and the simplified models are simulated with the coupled simulation tool Flex5-Poseidon and analysed regarding frequencies, fatigue loads, and ultimate loads. A model has been found which reaches an adequate increase of simulation speed while holding the results in an acceptable range compared to the reference results.

  9. 27 CFR 25.94 - Strengthening bonds.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Strengthening bonds. 25.94... OF THE TREASURY LIQUORS BEER Bonds and Consents of Surety § 25.94 Strengthening bonds. (a... strengthening bond in sufficient penal sum if the surety is the same as on the bond in effect. If the surety is...

  10. 27 CFR 25.94 - Strengthening bonds.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Strengthening bonds. 25.94... OF THE TREASURY LIQUORS BEER Bonds and Consents of Surety § 25.94 Strengthening bonds. (a... strengthening bond in sufficient penal sum if the surety is the same as on the bond in effect. If the surety is...

  11. 27 CFR 25.94 - Strengthening bonds.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Strengthening bonds. 25.94... OF THE TREASURY ALCOHOL BEER Bonds and Consents of Surety § 25.94 Strengthening bonds. (a... strengthening bond in sufficient penal sum if the surety is the same as on the bond in effect. If the surety is...

  12. 27 CFR 25.94 - Strengthening bonds.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Strengthening bonds. 25.94... OF THE TREASURY ALCOHOL BEER Bonds and Consents of Surety § 25.94 Strengthening bonds. (a... strengthening bond in sufficient penal sum if the surety is the same as on the bond in effect. If the surety is...

  13. 27 CFR 25.94 - Strengthening bonds.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Strengthening bonds. 25.94... OF THE TREASURY LIQUORS BEER Bonds and Consents of Surety § 25.94 Strengthening bonds. (a... strengthening bond in sufficient penal sum if the surety is the same as on the bond in effect. If the surety is...

  14. Etched poly(ether ether ketone) jacket stir bar with detachable dumbbell-shaped structure for stir bar sorptive extraction.

    PubMed

    Zhou, Wei; Wang, Chenlu; Wang, Xuemei; Chen, Zilin

    2018-06-08

    Development of stir bar sorptive extraction (SBSE) device with high stability and extraction efficiency is critical and challenging by date. In this work, etched poly(ether ether ketone) (PEEK) tube with high mechanical strength and large specific surface area was used as jacket for SBSE device. By etching with concentrated sulfuric acid, the smooth outer surface of PEEK become porous with plenty of micro holes, which was beneficial for coating of sorbents and significantly improved the extraction performance. After functionalized by bio-polydopamine method, strong hydrophobic p-naphtholbenzein molecular was immobilized onto the chemical resistant PEEK surface (PNB@E-PEEK) as stationary phase. We also firstly developed a simple detachable dumbbell-shaped structure for improving the workability of PEEK jacket stir bar. The dumbbell-shaped construction can eliminate the friction between stir bar and container, and the design of detachable structure make elution can be accomplished easier with small amount of organic solvent. It was interesting that the developed detachable dumbbell-shaped PNB@E-PEEK stir bar showed exceptional stability and extraction efficiency for SBSE enrichment of multiple analytes including several Sudan dyes, triazines, polycyclic aromatic hydrocarbons (PAHs), alkaloids and flavonoid. By coupling with high performance liquid chromatography-ultraviolet detection (HPLC-UV), PNB@E-PEEK stir bar based SBSE-HPLC-UV method was applied for the analysis of common Sudan dye pollutants. The method showed low limits of detection (0.02-0.03 ng/mL), good linearity (R 2  ≥ 0.9979) and good reproducibility (relative standard deviation ≤ 7.96%). It has been successfully applied to determine three dye pollutants in tap and lake water. Copyright © 2018 Elsevier B.V. All rights reserved.

  15. Strengthening public health surveillance and response using the health systems strengthening agenda in developing countries.

    PubMed

    Nsubuga, Peter; Nwanyanwu, Okey; Nkengasong, John N; Mukanga, David; Trostle, Murray

    2010-12-03

    There is increased interest in strengthening health systems for developing countries. However, at present, there is common uncertainty about how to accomplish this task. Specifically, several nations are faced with an immense challenge of revamping an entire system. To accomplish this, it is essential to first identify the components of the system that require modification. The World Health Organization (WHO) has proposed health system building blocks, which are now widely recognized as essential components of health systems strengthening.With increased travel and urbanization, the threat of emerging diseases of pandemic potential is increasing alongside endemic diseases such as human immunodeficiency virus (HIV), tuberculosis (TB), malaria, and hepatitis virus infections. At the same time, the epidemiologic patterns are shifting, giving rise to a concurrent increase in disease burden due to non-communicable diseases. These diseases can be addressed by public health surveillance and response systems that are operated by competent public health workers in core public health positions at national and sub-national levels with a focus on disease prevention.We describe two ways that health ministries in developing countries could leverage President Obama's Global Health Initiative (GHI) to build public health surveillance and response systems using proven models for public health systems strengthening and to create the public health workforce to operate those systems. We also offer suggestions for how health ministries could strengthen public health systems within the broad health systems strengthening agenda. Existing programs (e.g., the Global Vaccine Alliance [GAVI] and the Global Fund Against Tuberculosis, AIDS, and Malaria [GFTAM]) can also adapt their current health systems strengthening programs to build sustainable public health systems.

  16. An Empirical Analysis of Life Jacket Effectiveness in Recreational Boating.

    PubMed

    Viauroux, Christelle; Gungor, Ali

    2016-02-01

    This article gives a measure of life jacket (LJ) effectiveness in U.S. recreational boating. Using the U.S. Coast Guard's Boating Accident Report Database from 2008 to 2011, we find that LJ wear is one of the most important determinants influencing the number of recreational boating fatalities, together with the number of vessels involved, and the type and engine of the vessel(s). We estimate a decrease in the number of deceased per vessel of about 80% when the operator wears their LJs compared to when they do not. The odds of dying are 86% higher than average if the accident involves a canoe or kayak, but 80% lower than average when more than one vessel is involved in the accident and 34% lower than average when the operator involved in the accident has more than 100 hours of boating experience. Interestingly, we find that LJ effectiveness decreases significantly as the length of the boat increases and decreases slightly as water temperature increases. However, it increases slightly as the operator's age increases. We find that between 2008 and 2011, an LJ regulation that requires all operators to wear their LJs-representing a 20% increase in wear rate-would have saved 1,721 (out of 3,047) boaters or 1,234 out of 2,185 drowning victims. The same policy restricted to boats 16-30 feet in length would have saved approximately 778 victims. Finally, we find that such a policy would reduce the percentage of drowning victims compared to other causes of death. © 2015 Society for Risk Analysis.

  17. Which Treatment is More Effective for Functional Ankle Instability: Strengthening or Combined Muscle Strengthening and Proprioceptive Exercises?

    PubMed

    Kim, Ki-Jong; Kim, Young-Eok; Jun, Hyun-Ju; Lee, Jin-Su; Ji, Sung-Ha; Ji, Sang-Goo; Seo, Tae-Hwa; Kim, Young-Ok

    2014-03-01

    [Purpose] The purpose of this study was to implement combined muscle strengthening and proprioceptive exercises to examine the effects of combined exercises on functional ankle instability. [Subjects and Methods] Experiments were conducted with 30 adult males and females. The study subjects were randomly assigned to either a control group (Group A), a muscle strengthening exercise group (Group B), or a combined muscle strengthening and proprioceptive exercise group (Group C) consisting of 10 subjects each. In Group A, measurements were only conducted before and after the experiment without any intervention, whereas the exercise programs for Group B and Group C were implemented three days per week for four weeks. [Results] Muscle strength showed significant increases in Groups B and C compared with the control group during plantar flexion, dorsiflexion, inversion, and eversion. The Cumberland ankle instability tool showed significant increases in Group B and Group C compared with Group A and significant increases in Group C compared with Group B. [Conclusion] Applying combined muscle strengthening and proprioceptive exercises to those who have functional ankle instability is more effective than applying only muscle strengthening exercises.

  18. Smart Textiles for Strengthening of Structures

    NASA Astrophysics Data System (ADS)

    Górski, Marcin; Krzywoń, Rafał; Dawczyński, Szymon; Szojda, Leszek; Salvado, Rita; Lopes, Catarina; Araujo, Pedro; Velez, Fernando Jose; Castro-Gomes, Joao

    2016-11-01

    This paper presents results of mechanical tests on a prototype of an innovative structural strengthening in form of self-monitoring fabric. Smart textile employs carbon fibers conductivity for measuring strains while monitoring changes of electric resistance under increasing load. A general solution was tested in a series of calibrating tests on strengthening of small size concrete slabs. Promising results of simple specimen, has encouraged the research team to perform the next tests using mastered carbon fibre reinforced fabric. Main tests were performed on natural scale RC beam. Smart textile proved its efficiency in both: strengthening and monitoring of strains during load increase. New strengthening proposal was given 10% increase of loading capacity and the readings of strain changes were similar to those obtained in classical methods. In order to calibrate the prototype and to define range limits of solution usability, textile sensor was tested in areas of large deformations (timber beam) and aswell as very small strains (bridge bearing block). In both cases, the prototype demonstrated excellent performance in the range of importance for structural engineering. This paper also presents an example of use of the smart strengthening in situ, in a real life conditions.

  19. HIV communication capacity strengthening: a critical review.

    PubMed

    Lettenmaier, Cheryl; Kraft, Joan Marie; Raisanen, Keris; Serlemitsos, Elizabeth

    2014-08-15

    HIV communication is most effective and sustainable when it is designed and implemented locally and tailored to the local context. This requires capacity strengthening at national, subnational, and community levels. Through a review of the published and selected "grey" literature, we examine HIV communication capacity strengthening: definitions, measurements, implementation, and effects. We found limited documentation of HIV communication capacity needs or systematic approaches to address them. Most HIV communication capacity strengthening to date has focused on building individual competencies to design and manage social and behavior change communication programs through training courses, often coupled with networking opportunities for participants, post-training mentoring, and technical assistance. A few of these efforts have been evaluated through pre- and post-training tests and qualitative interviews with participants and have shown potential for improvement in individual skills and knowledge. Health communication capacity assessment tools that measure individual and organizational competencies exist, but they have most often been used to identify capacity building needs, not for evaluating capacity strengthening efforts. A new definition of capacity strengthening, grown out of recent efforts to improve effectiveness of international health and development programs, focuses on improving organizational and societal systems that support performance and individual competencies. We propose a holistic model for HIV communication capacity strengthening and call for rigorous documentation and evaluation to determine and scale-up optimal capacity building interventions for strengthening social and behavior change communication for HIV prevention, care, and treatment in developing countries.

  20. Strengthening of defected beam-column joints using CFRP.

    PubMed

    Mahmoud, Mohamed H; Afefy, Hamdy M; Kassem, Nesreen M; Fawzy, Tarek M

    2014-01-01

    This paper presents an experimental study for the structural performance of reinforced concrete (RC) exterior beam-column joints rehabilitated using carbon-fiber-reinforced polymer (CFRP). The present experimental program consists of testing 10 half-scale specimens divided into three groups covering three possible defects in addition to an adequately detailed control specimen. The considered defects include the absence of the transverse reinforcement within the joint core, insufficient bond length for the beam main reinforcement and inadequate spliced implanted column on the joint. Three different strengthening schemes were used to rehabilitate the defected beam-column joints including externally bonded CFRP strips and sheets in addition to near surface mounted (NSM) CFRP strips. The failure criteria including ultimate capacity, mode of failure, initial stiffness, ductility and the developed ultimate strain in the reinforcing steel and CFRP were considered and compared for each group for the control and the CFRP-strengthened specimens. The test results showed that the proposed CFRP strengthening configurations represented the best choice for strengthening the first two defects from the viewpoint of the studied failure criteria. On the other hand, the results of the third group showed that strengthening the joint using NSM strip technique enabled the specimen to outperform the structural performance of the control specimen while strengthening the joints using externally bonded CFRP strips and sheets failed to restore the strengthened joints capacity.

  1. 34 CFR 607.1 - What is the Strengthening Institutions Program?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 34 Education 3 2011-07-01 2011-07-01 false What is the Strengthening Institutions Program? 607.1... POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION STRENGTHENING INSTITUTIONS PROGRAM General § 607.1 What is the Strengthening Institutions Program? The purpose of the Strengthening Institutions Program is to provide grants...

  2. 34 CFR 607.1 - What is the Strengthening Institutions Program?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 34 Education 3 2014-07-01 2014-07-01 false What is the Strengthening Institutions Program? 607.1... POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION STRENGTHENING INSTITUTIONS PROGRAM General § 607.1 What is the Strengthening Institutions Program? The purpose of the Strengthening Institutions Program is to provide grants...

  3. 34 CFR 607.1 - What is the Strengthening Institutions Program?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 34 Education 3 2012-07-01 2012-07-01 false What is the Strengthening Institutions Program? 607.1... POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION STRENGTHENING INSTITUTIONS PROGRAM General § 607.1 What is the Strengthening Institutions Program? The purpose of the Strengthening Institutions Program is to provide grants...

  4. 34 CFR 607.1 - What is the Strengthening Institutions Program?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 34 Education 3 2013-07-01 2013-07-01 false What is the Strengthening Institutions Program? 607.1... POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION STRENGTHENING INSTITUTIONS PROGRAM General § 607.1 What is the Strengthening Institutions Program? The purpose of the Strengthening Institutions Program is to provide grants...

  5. 34 CFR 607.1 - What is the Strengthening Institutions Program?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 3 2010-07-01 2010-07-01 false What is the Strengthening Institutions Program? 607.1... POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION STRENGTHENING INSTITUTIONS PROGRAM General § 607.1 What is the Strengthening Institutions Program? The purpose of the Strengthening Institutions Program is to provide grants...

  6. Strengthening quitter self-identity: An experimental study.

    PubMed

    Meijer, Eline; Gebhardt, Winifred A; van Laar, Colette; van den Putte, Bas; Evers, Andrea W M

    2018-06-10

    Smoking-related self-identity processes are important for smoking cessation. We examined whether quitter self-identity (i.e. identification with quitting smoking) could be strengthened through a writing exercise, and whether expected social support for quitting, manipulated through vignettes, could facilitate identification with quitting. Participants (N = 339 daily smokers) were randomly assigned to a 2 (identity: strengthened quitter self-identity vs. control) × 3 (social support: present vs. absent vs. neutral control) between-participants design. The main outcome was post-test quitter self-identity. Post-test quitter self-identity was not strengthened successfully. Only a small and marginally significant intervention effect was found on quitter self-identity, which did not generalise to positively influence quit-intention or behaviour. The social support manipulation did not facilitate quitter self-identity. Secondary content analyses showed that quitter self-identity was strengthened among participants who linked quitting smoking to their lifestyle, wanted to become quitters for health reasons, and whose reasons for becoming quitters included approach of positive aspects of quitting, but not among participants who linked quitter self-identity to their self-perceptions. Results provide insight into the content of smokers' self-conceptualizations as quitters. Writing exercises should be improved and tested to eventually successfully strengthen quitter identities.

  7. Spacecraft attitude impacts on COLD-SAT non-vacuum jacketed LH2 supply tank thermal performance

    NASA Technical Reports Server (NTRS)

    Arif, Hugh

    1990-01-01

    The Cryogenic On-Orbit Liquid Depot - Storage, Acquisition and Transfer (COLD-SAT) spacecraft will be launched into low earth orbit to perform fluid management experiments on the behavior of subcritical liquid hydrogen (LH2). For determining the optimum on-orbit attitude for the COLD-SAT satellite, a comparative analytical study was performed to determine the thermal impacts of spacecraft attitude on the performance of the COLD-SAT non-vacuum jacketed LH2 supply tank. Tank thermal performance was quantitied by total conductive and radiative heat leakage into the pressure vessel due to the absorbed solar, earth albedo and infra-red on-orbit fluxes, and also by the uniformity of the variation of this leakage on the vessel surface area. Geometric and thermal analysis math models were developed for the spacecraft and the tank as part of this analysis, based on their individual thermal/structural designs. Two quasi-inertial spacecraft attitudes were investigated and their effects on the tank performance compared. The results are one of the criteria by which the spacecraft orientation in orbit was selected for the in-house NASA Lewis Research Center design.

  8. Spacecraft attitude impacts on COLD-SAT non-vacuum jacketed LH2 supply tank thermal performance

    NASA Technical Reports Server (NTRS)

    Arif, Hugh

    1990-01-01

    The Cryogenic On-Orbit Liquid Depot - Storage, Acquisition and Transfer (COLD-SAT) spacecraft will be launched into low earth orbit to perform fluid management experiments on the behavior of subcritical liquid hydrogen (LH2). For determining the optimum on-orbit attitude for the COLD-SAT satellite, a comparative analytical study was performed to determine the thermal impacts of spacecraft attitude on the performance of the COLD-SAT non-vacuum jacketed LH2 supply tank. Tank thermal performance was quantified by total conductive and radiative heat leakage into the pressure vessel due to the absorbed solar, earth albedo and infra-red on-orbit fluxes, and also by the uniformity of the variation of this leakage on the vessel surface area. Geometric and thermal analysis math models were developed for the spacecraft and the tank as part of this analysis, based on their individual thermal/structural designs. Two quasi-inertial spacecraft attitudes were investigated and their effects on the tank performance compared. The results are one of the criteria by which the spacecraft orientation in orbit was selected for the in-house NASA Lewis Research Center design.

  9. Quadriceps combined with hip abductor strengthening versus quadriceps strengthening in treating knee osteoarthritis: a study protocol for a randomized controlled trial.

    PubMed

    Xie, Yujie; Zhang, Chi; Jiang, Wei; Huang, Juan; Xu, Lili; Pang, Guoyin; Tang, Haiyan; Chen, Ruyan; Yu, Jihua; Guo, Shengmin; Xu, Fangyuan; Wang, Jianxiong

    2018-05-15

    Lower limb strengthening, especially the quadriceps training, is of much necessity for patients with knee osteoarthritis (KOA). Previous studies suggest that strengthening of the hip muscles, especially the hip abductor, can potentially relieve the KOA-associated symptoms. Nevertheless, the effects of quadriceps combined with hip abductor strengthening remain unclear. Therefore, the current randomized controlled trial is designed aiming to observe whether quadriceps in combination with hip abductor strengthening can better improve the function and reduce pain in KOA patients than quadriceps training alone. A total of 80 subjects with symptomatic KOA will be recruited from the communities and hospital outpatient, and will be randomly assigned to the experiment group (Quadriceps-plus-hip-abductor-strengthening) or the control group (Quadriceps-strengthening). Specifically, participants in the experiment group will complete 4 exercises to train the quadriceps and hip abductor twice a day for 6 weeks at home, while those in the control group will only perform 2 exercises to strengthen the quadriceps. Besides, all patients will also receive usual care management, including health education and physical agent therapy when necessary. Knee pain will be measured using the Visual Analogue Scale (VAS) at baseline, in every week during the course of treatment, as well as 8 and 12 weeks after randomization. Furthermore, knee function will be measured using the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) scale, and the quality of life will be measured using the MOS Item Short-form Health Survey (SF-36). In this study, several simple tests will be applied to assess the objective function. All the assessments except for VAS will be carried out at baseline, and in the 6th, 8th and 12th weeks respectively. Our findings will provide more evidence for the effects of hip abductor strengthening on relieving pain and improving function in KOA patients. Hip

  10. Microstructure characterization and strengthening mechanisms of oxide dispersion strengthened (ODS) Fe-9%Cr and Fe-14%Cr extruded bars

    NASA Astrophysics Data System (ADS)

    Chauhan, A.; Bergner, F.; Etienne, A.; Aktaa, J.; de Carlan, Y.; Heintze, C.; Litvinov, D.; Hernandez-Mayoral, M.; Oñorbe, E.; Radiguet, B.; Ulbricht, A.

    2017-11-01

    The collaborative study is focused on the relationship between microstructure and yield stress for an ODS Fe-9%Cr-based transformable alloy and an ODS Fe-14%Cr-based ferritic alloy. The contributions to the total room temperature yield stress arising from various strengthening mechanisms are addressed on the basis of a comprehensive description of the microstructures uncovered by means of transmission electron microscopy (TEM), electron backscatter diffraction (EBSD), small-angle neutron scattering (SANS) and atom probe tomography (APT). While these methods provide a high degree of complementarity, a reasonable agreement was found in cases of overlap of information. The derived set of microstructure parameters along with reported strengthening equations was used to calculate the room temperature yield stress. The estimates were critically compared with the measured yield stress for an extended set of alloys including data reported for Fe-Cr model alloys and steels thus covering one order of magnitude or more in grain size, dislocation density, particle density and yield stress. The comparison shows that particle strengthening, dislocation forest strengthening, and Hall-Petch strengthening are the major contributions and that a mixed superposition rule reproduces the measured yield stress within experimental scatter for the whole extended set of alloys. The wide variation of microstructures additionally underpins the conclusions and goes beyond previous work, in which one or few ODS steels and narrow microstructure variations were typically covered.

  11. Optimal cost for strengthening or destroying a given network

    NASA Astrophysics Data System (ADS)

    Patron, Amikam; Cohen, Reuven; Li, Daqing; Havlin, Shlomo

    2017-05-01

    Strengthening or destroying a network is a very important issue in designing resilient networks or in planning attacks against networks, including planning strategies to immunize a network against diseases, viruses, etc. Here we develop a method for strengthening or destroying a random network with a minimum cost. We assume a correlation between the cost required to strengthen or destroy a node and the degree of the node. Accordingly, we define a cost function c (k ) , which is the cost of strengthening or destroying a node with degree k . Using the degrees k in a network and the cost function c (k ) , we develop a method for defining a list of priorities of degrees and for choosing the right group of degrees to be strengthened or destroyed that minimizes the total price of strengthening or destroying the entire network. We find that the list of priorities of degrees is universal and independent of the network's degree distribution, for all kinds of random networks. The list of priorities is the same for both strengthening a network and for destroying a network with minimum cost. However, in spite of this similarity, there is a difference between their pc, the critical fraction of nodes that has to be functional to guarantee the existence of a giant component in the network.

  12. Optimal cost for strengthening or destroying a given network.

    PubMed

    Patron, Amikam; Cohen, Reuven; Li, Daqing; Havlin, Shlomo

    2017-05-01

    Strengthening or destroying a network is a very important issue in designing resilient networks or in planning attacks against networks, including planning strategies to immunize a network against diseases, viruses, etc. Here we develop a method for strengthening or destroying a random network with a minimum cost. We assume a correlation between the cost required to strengthen or destroy a node and the degree of the node. Accordingly, we define a cost function c(k), which is the cost of strengthening or destroying a node with degree k. Using the degrees k in a network and the cost function c(k), we develop a method for defining a list of priorities of degrees and for choosing the right group of degrees to be strengthened or destroyed that minimizes the total price of strengthening or destroying the entire network. We find that the list of priorities of degrees is universal and independent of the network's degree distribution, for all kinds of random networks. The list of priorities is the same for both strengthening a network and for destroying a network with minimum cost. However, in spite of this similarity, there is a difference between their p_{c}, the critical fraction of nodes that has to be functional to guarantee the existence of a giant component in the network.

  13. Strengthening Mechanisms in Microtruss Metals

    NASA Astrophysics Data System (ADS)

    Ng, Evelyn K.

    Microtrusses are hybrid materials composed of a three-dimensional array of struts capable of efficiently transmitting an externally applied load. The strut connectivity of microtrusses enables them to behave in a stretch-dominated fashion, allowing higher specific strength and stiffness values to be reached than conventional metal foams. While much attention has been given to the optimization of microtruss architectures, little attention has been given to the strengthening mechanisms inside the materials that make up this architecture. This thesis examines strengthening mechanisms in aluminum alloy and copper alloy microtruss systems with and without a reinforcing structural coating. C11000 microtrusses were stretch-bend fabricated for the first time; varying internal truss angles were selected in order to study the accumulating effects of plastic deformation and it was found that the mechanical performance was significantly enhanced in the presence of work hardening with the peak strength increasing by a factor of three. The C11000 microtrusses could also be significantly reinforced with sleeves of electrodeposited nanocrystalline Ni-53wt%Fe. It was found that the strength increase from work hardening and electrodeposition were additive over the range of structures considered. The AA2024 system allowed the contribution of work hardening, precipitation hardening, and hard anodizing to be considered as interacting strengthening mechanisms. Because of the lower formability of AA2024 compared to C11000, several different perforation geometries in the starting sheet were considered in order to more effectively distribute the plastic strain during stretch-bend fabrication. A T8 condition was selected over a T6 condition because it was shown that the plastic deformation induced during the final step was sufficient to enhance precipitation kinetics allowing higher strengths to be reached, while at the same time eliminating one annealing treatment. When hard anodizing

  14. New concept of critical infrastructure strengthening

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gazizov, Talgat R.; Orlov, Pavel E.; Zabolotsky, Alexander M.

    2016-06-08

    Strengthening of critical infrastructure is considered. Modal reservation of electronics is proposed as a new concept of the strengthening. The concept combines a widely used cold backup and a recently proposed modal filtration. It makes electronics reliable as well as protected against electromagnetic interference, especially the ultra-wide band pulses. New printed circuit board structure is suggested for implementation of the proposed concept. Results of simulation in time and frequency domains are presented for the suggested structures. Considerable attenuation of dangerous excitations shows that the new concept and structure are promising.

  15. 26 CFR 1.846-3 - Fresh start and reserve strengthening.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 26 Internal Revenue 8 2010-04-01 2010-04-01 false Fresh start and reserve strengthening. 1.846-3... TAX (CONTINUED) INCOME TAXES Other Insurance Companies § 1.846-3 Fresh start and reserve strengthening... relating to fresh start and reserve strengthening. For purposes of section 1023(e) of the 1986 Act, a...

  16. Strengthening of metallic alloys with nanometer-size oxide dispersions

    DOEpatents

    Flinn, J.E.; Kelly, T.F.

    1999-06-01

    Austenitic stainless steels and nickel-base alloys containing, by wt. %, 0.1 to 3.0% V, 0.01 to 0.08% C, 0.01 to 0.5% N, 0.05% max. each of Al and Ti, and 0.005 to 0.10% O, are strengthened and ductility retained by atomization of a metal melt under cover of an inert gas with added oxygen to form approximately 8 nanometer-size hollow oxides within the alloy grains and, when the alloy is aged, strengthened by precipitation of carbides and nitrides nucleated by the hollow oxides. Added strengthening is achieved by nitrogen solid solution strengthening and by the effect of solid oxides precipitated along and pinning grain boundaries to provide temperature-stabilization and refinement of the alloy grains. 20 figs.

  17. Strengthening of metallic alloys with nanometer-size oxide dispersions

    DOEpatents

    Flinn, John E.; Kelly, Thomas F.

    1999-01-01

    Austenitic stainless steels and nickel-base alloys containing, by wt. %, 0.1 to 3.0% V, 0.01 to 0.08% C, 0.01 to 0.5% N, 0.05% max. each of Al and Ti, and 0.005 to 0.10% O, are strengthened and ductility retained by atomization of a metal melt under cover of an inert gas with added oxygen to form approximately 8 nanometer-size hollow oxides within the alloy grains and, when the alloy is aged, strengthened by precipitation of carbides and nitrides nucleated by the hollow oxides. Added strengthening is achieved by nitrogen solid solution strengthening and by the effect of solid oxides precipitated along and pinning grain boundaries to provide temperature-stabilization and refinement of the alloy grains.

  18. Dispersion strengthened copper

    DOEpatents

    Sheinberg, H.; Meek, T.T.; Blake, R.D.

    1990-01-09

    A composition of matter is described which is comprised of copper and particles which are dispersed throughout the copper, where the particles are comprised of copper oxide and copper having a coating of copper oxide. A method for making this composition of matter is also described. This invention relates to the art of powder metallurgy and, more particularly, it relates to dispersion strengthened metals.

  19. Strengthening Mechanisms in Thermomechanically Processed NbTi-Microalloyed Steel

    NASA Astrophysics Data System (ADS)

    Kostryzhev, Andrii G.; Marenych, Olexandra O.; Killmore, Chris R.; Pereloma, Elena V.

    2015-08-01

    The effect of deformation temperature on microstructure and mechanical properties was investigated for thermomechanically processed NbTi-microalloyed steel with ferrite-pearlite microstructure. With a decrease in the finish deformation temperature at 1348 K to 1098 K (1075 °C to 825 °C) temperature range, the ambient temperature yield stress did not vary significantly, work hardening rate decreased, ultimate tensile strength decreased, and elongation to failure increased. These variations in mechanical properties were correlated to the variations in microstructural parameters (such as ferrite grain size, solid solution concentrations, precipitate number density and dislocation density). Calculations based on the measured microstructural parameters suggested the grain refinement, solid solution strengthening, precipitation strengthening, and work hardening contributed up to 32 pct, up to 48 pct, up to 25 pct, and less than 3 pct to the yield stress, respectively. With a decrease in the finish deformation temperature, both the grain size strengthening and solid solution strengthening increased, the precipitation strengthening decreased, and the work hardening contribution did not vary significantly.

  20. Strengthening Resilience in Families

    ERIC Educational Resources Information Center

    Guild, Diane; Espiner, Deborah

    2014-01-01

    Rolling with Resilience (RwR) provides a springboard for developing strategies that build strengths and supports to foster developmental assets in children and youth (Benson, Scales, & Roehlkepartain, 2011). In Circle of Courage terms, resilience is strengthened by opportunities for Belonging, Mastery, Independence, and Generosity (Brendtro,…

  1. Writing Strengthens Orthography and Alphabetic-Coding Strengthens Phonology in Learning to Read Chinese

    ERIC Educational Resources Information Center

    Guan, Connie Qun; Liu, Ying; Chan, Derek Ho Leung; Ye, Feifei; Perfetti, Charles A.

    2011-01-01

    Learning to write words may strengthen orthographic representations and thus support word-specific recognition processes. This hypothesis applies especially to Chinese because its writing system encourages character-specific recognition that depends on accurate representation of orthographic form. We report 2 studies that test this hypothesis in…

  2. Defining pharmaceutical systems strengthening: concepts to enable measurement

    PubMed Central

    Hafner, Tamara; Lee, David; Aboagye-Nyame, Francis

    2017-01-01

    Abstract Pharmaceutical products are indispensable for improving health outcomes. An extensive body of work on access to and use of medicines has resulted in an assortment of tools measuring various elements of pharmaceutical systems. Until now however, there has been little attempt to conceptualize a pharmaceutical system as an entity and define its strengthening in a way that allows for measuring systems strengthening. The narrow focus of available tools limits their value in ascertaining which interventions result in stronger, more resilient systems. We sought to address this shortcoming by revisiting the current definitions, frameworks and assessment tools related to pharmaceutical systems. We conducted a comprehensive literature review and consulted with select pharmaceutical experts. On the basis of our review, we propose that a pharmaceutical system consists of all structures, people, resources, processes, and their interactions within the broader health system that aim to ensure equitable and timely access to safe, effective, quality pharmaceutical products and related services that promote their appropriate and cost-effective use to improve health outcomes. We further propose that pharmaceutical systems strengthening is the process of identifying and implementing strategies and actions that achieve coordinated and sustainable improvements in the critical components of a pharmaceutical system to make it more responsive and resilient and to enhance its performance for achieving better health outcomes. Finally, we established that, in addition to system performance and resilience, seven components of the pharmaceutical system are critical for measuring pharmaceutical systems strengthening: pharmaceutical products and related services; policy, laws and governance; regulatory systems; innovation, research and development, manufacturing, and trade; financing; human resources; and information. This work adds clarity to the concept of pharmaceutical systems and

  3. Some Effects of Injection Advance Angle, Engine-Jacket Temperature, and Speed on Combustion in a Compression-Ignition Engine

    NASA Technical Reports Server (NTRS)

    Rothrock, A M; Waldron, C D

    1936-01-01

    An optical indicator and a high-speed motion-picture camera capable of operating at the rate of 2,000 frames per second were used to record simultaneously the pressure development and the flame formation in the combustion chamber of the NACA combustion apparatus. Tests were made at engine speeds of 570 and 1,500 r.p.m. The engine-jacket temperature was varied from 100 degrees to 300 degrees F. And the injection advance angle from 13 degrees after top center to 120 degrees before top center. The results show that the course of the combustion is largely controlled by the temperature and pressure of the air in the chamber from the time the fuel is injected until the time at which combustion starts and by the ignition lag. The conclusion is presented that in a compression-ignition engine with a quiescent combustion chamber the ignition lag should be the longest that can be used without excessive rates of pressure rise; any further shortening of the ignition lag decreased the effective combustion of the engine.

  4. Dislocation Strengthening without Ductility Trade-off in Metastable Austenitic Steels

    PubMed Central

    Liu, Jiabin; Jin, Yongbin; Fang, Xiaoyang; Chen, Chenxu; Feng, Qiong; Liu, Xiaowei; Chen, Yuzeng; Suo, Tao; Zhao, Feng; Huang, Tianlin; Wang, Hongtao; Wang, Xi; Fang, Youtong; Wei, Yujie; Meng, Liang; Lu, Jian; Yang, Wei

    2016-01-01

    Strength and ductility are mutually exclusive if they are manifested as consequence of the coupling between strengthening and toughening mechanisms. One notable example is dislocation strengthening in metals, which invariably leads to reduced ductility. However, this trend is averted in metastable austenitic steels. A one-step thermal mechanical treatment (TMT), i.e. hot rolling, can effectively enhance the yielding strength of the metastable austenitic steel from 322 ± 18 MPa to 675 ± 15 MPa, while retaining both the formability and hardenability. It is noted that no boundaries are introduced in the optimized TMT process and all strengthening effect originates from dislocations with inherited thermal stability. The success of this method relies on the decoupled strengthening and toughening mechanisms in metastable austenitic steels, in which yield strength is controlled by initial dislocation density while ductility is retained by the capability to nucleate new dislocations to carry plastic deformation. Especially, the simplicity in processing enables scaling and industrial applications to meet the challenging requirements of emissions reduction. On the other hand, the complexity in the underlying mechanism of dislocation strengthening in this case may shed light on a different route of material strengthening by stimulating dislocation activities, rather than impeding motion of dislocations. PMID:27739481

  5. Dislocation Strengthening without Ductility Trade-off in Metastable Austenitic Steels

    NASA Astrophysics Data System (ADS)

    Liu, Jiabin; Jin, Yongbin; Fang, Xiaoyang; Chen, Chenxu; Feng, Qiong; Liu, Xiaowei; Chen, Yuzeng; Suo, Tao; Zhao, Feng; Huang, Tianlin; Wang, Hongtao; Wang, Xi; Fang, Youtong; Wei, Yujie; Meng, Liang; Lu, Jian; Yang, Wei

    2016-10-01

    Strength and ductility are mutually exclusive if they are manifested as consequence of the coupling between strengthening and toughening mechanisms. One notable example is dislocation strengthening in metals, which invariably leads to reduced ductility. However, this trend is averted in metastable austenitic steels. A one-step thermal mechanical treatment (TMT), i.e. hot rolling, can effectively enhance the yielding strength of the metastable austenitic steel from 322 ± 18 MPa to 675 ± 15 MPa, while retaining both the formability and hardenability. It is noted that no boundaries are introduced in the optimized TMT process and all strengthening effect originates from dislocations with inherited thermal stability. The success of this method relies on the decoupled strengthening and toughening mechanisms in metastable austenitic steels, in which yield strength is controlled by initial dislocation density while ductility is retained by the capability to nucleate new dislocations to carry plastic deformation. Especially, the simplicity in processing enables scaling and industrial applications to meet the challenging requirements of emissions reduction. On the other hand, the complexity in the underlying mechanism of dislocation strengthening in this case may shed light on a different route of material strengthening by stimulating dislocation activities, rather than impeding motion of dislocations.

  6. Dislocation Strengthening without Ductility Trade-off in Metastable Austenitic Steels.

    PubMed

    Liu, Jiabin; Jin, Yongbin; Fang, Xiaoyang; Chen, Chenxu; Feng, Qiong; Liu, Xiaowei; Chen, Yuzeng; Suo, Tao; Zhao, Feng; Huang, Tianlin; Wang, Hongtao; Wang, Xi; Fang, Youtong; Wei, Yujie; Meng, Liang; Lu, Jian; Yang, Wei

    2016-10-14

    Strength and ductility are mutually exclusive if they are manifested as consequence of the coupling between strengthening and toughening mechanisms. One notable example is dislocation strengthening in metals, which invariably leads to reduced ductility. However, this trend is averted in metastable austenitic steels. A one-step thermal mechanical treatment (TMT), i.e. hot rolling, can effectively enhance the yielding strength of the metastable austenitic steel from 322 ± 18 MPa to 675 ± 15 MPa, while retaining both the formability and hardenability. It is noted that no boundaries are introduced in the optimized TMT process and all strengthening effect originates from dislocations with inherited thermal stability. The success of this method relies on the decoupled strengthening and toughening mechanisms in metastable austenitic steels, in which yield strength is controlled by initial dislocation density while ductility is retained by the capability to nucleate new dislocations to carry plastic deformation. Especially, the simplicity in processing enables scaling and industrial applications to meet the challenging requirements of emissions reduction. On the other hand, the complexity in the underlying mechanism of dislocation strengthening in this case may shed light on a different route of material strengthening by stimulating dislocation activities, rather than impeding motion of dislocations.

  7. High temperature dispersion strengthening of NiAl

    NASA Technical Reports Server (NTRS)

    Sherman, M.; Vedula, K.

    1986-01-01

    A potential high temperature strengthening mechanism for alloys based on the intermetallic compound NiAl was investigated. This study forms part of an overall program at NASA Lewis Research Center for exploring the potential of alloys based on NiAl for high temperature applications. An alloy containing 2.26 at% Nb and produced by hot extrusion of blended powders was examined in detail using optical and electron microscopy. Interdiffusion between the blended Nb and NiAl powders results in the formation of intermediate phases. A fine dispersion of precipitates of a hexagonal, ordered NiAlNb phases in a matrix of NiAl can be produced and this results in strengthening of the alloy by interfering with dislocation motion at high temperature. These precipitates are, however, found to coarsen during the high temperature (1300 K) deformation at slow strain rates and this may impose some limitatioins on the use of this strengthening mechanism.

  8. Family Strengthening Research: FY2014. OPRE Report 2015-22

    ERIC Educational Resources Information Center

    Administration for Children & Families, 2015

    2015-01-01

    This report provides detailed summaries of major research investments by OPRE's Division of Family Strengthening (DFS) along with brief overviews of past projects. The featured projects cover topics that include strengthening relationships within families, supporting fatherhood, nurturing children through their families, reducing teen pregnancy,…

  9. On the superposition of strengthening mechanisms in dispersion strengthened alloys and metal-matrix nanocomposites: Considerations of stress and energy

    NASA Astrophysics Data System (ADS)

    Ferguson, J. B.; Schultz, Benjamin F.; Venugopalan, Dev; Lopez, Hugo F.; Rohatgi, Pradeep K.; Cho, Kyu; Kim, Chang-Soo

    2014-03-01

    Yield strength improvement in dispersion strengthened alloys and nano particle-reinforced composites by well-known strengthening mechanisms such as solid solution, grain refinement, coherent and incoherent dispersed particles, and increased dislocation density resulting from work-hardening can all be described individually. However, there is no agreed upon description of how these mechanisms combine to determine the yield strength. In this work, we propose an analytical yield strength prediction model combining arithmetic and quadratic addition approaches based on the consideration of two types of yielding mechanisms; stress-activated and energy-activated. Using data available in the literature for materials of differing grain sizes, we consider the cases of solid solutions and coherent precipitates to show that they follow stress-activated behavior. Then, we applied our model with some empirical parameters to precipitationhardenable materials of various grain sizes in both coherent and incoherent precipitate conditions, which demonstrated that grain boundary and Orowan-strengthening can be treated as energy-activated mechanisms.

  10. Hip and Knee Strengthening Is More Effective Than Knee Strengthening Alone for Reducing Pain and Improving Activity in Individuals With Patellofemoral Pain: A Systematic Review With Meta-analysis.

    PubMed

    Nascimento, Lucas R; Teixeira-Salmela, Luci F; Souza, Ricardo B; Resende, Renan A

    2018-01-01

    Study Design Systematic review with meta-analysis. Background The addition of hip strengthening to knee strengthening for persons with patellofemoral pain has the potential to optimize treatment effects. There is a need to systematically review and pool the current evidence in this area. Objective To examine the efficacy of hip strengthening, associated or not with knee strengthening, to increase strength, reduce pain, and improve activity in individuals with patellofemoral pain. Methods A systematic review of randomized and/or controlled trials was performed. Participants in the reviewed studies were individuals with patellofemoral pain, and the experimental intervention was hip and knee strengthening. Outcome data related to muscle strength, pain, and activity were extracted from the eligible trials and combined in a meta-analysis. Results The review included 14 trials involving 673 participants. Random-effects meta-analyses revealed that hip and knee strengthening decreased pain (mean difference, -3.3; 95% confidence interval [CI]: -5.6, -1.1) and improved activity (standardized mean difference, 1.4; 95% CI: 0.03, 2.8) compared to no training/placebo. In addition, hip and knee strengthening was superior to knee strengthening alone for decreasing pain (mean difference, -1.5; 95% CI: -2.3, -0.8) and improving activity (standardized mean difference, 0.7; 95% CI: 0.2, 1.3). Results were maintained beyond the intervention period. Meta-analyses showed no significant changes in strength for any of the interventions. Conclusion Hip and knee strengthening is effective and superior to knee strengthening alone for decreasing pain and improving activity in persons with patellofemoral pain; however, these outcomes were achieved without a concurrent change in strength. Level of Evidence Therapy, level 1a-. J Orthop Sports Phys Ther 2018;48(1):19-31. Epub 15 Oct 2017. doi:10.2519/jospt.2018.7365.

  11. Squeeze strengthening of magnetorheological fluids using mixed mode operation

    NASA Astrophysics Data System (ADS)

    Becnel, A. C.; Sherman, S. G.; Hu, W.; Wereley, N. M.

    2015-05-01

    This research details a novel method of increasing the shear yield stress of magnetorheological fluids by combining shear and squeeze modes of operation to manipulate particle chain structures, so-called squeeze strengthening. Using a custom built Searle cell magnetorheometer, which is a model device emulating a rotary magnetorheological energy absorber (MREA), the contribution of squeeze strengthening to the total controllable yield force is experimentally investigated. Using an eccentric rotating inner cylinder, characterization data from large (1 mm) and small (0.25 mm) nominal gap geometries are compared to investigate the squeeze strengthening effect. Details of the experimental setup and method are presented, and a hybrid model is used to explain experimental trends. This study demonstrates that it is feasible, utilizing squeeze strengthening to increase yield stress, to either (1) design a rotary MREA of a given volume to achieve higher energy absorption density (energy absorbed normalized by active fluid volume), or (2) reduce the volume of a given rotary MREA to achieve the same energy absorption density.

  12. Defining pharmaceutical systems strengthening: concepts to enable measurement.

    PubMed

    Hafner, Tamara; Walkowiak, Helena; Lee, David; Aboagye-Nyame, Francis

    2017-05-01

    Pharmaceutical products are indispensable for improving health outcomes. An extensive body of work on access to and use of medicines has resulted in an assortment of tools measuring various elements of pharmaceutical systems. Until now however, there has been little attempt to conceptualize a pharmaceutical system as an entity and define its strengthening in a way that allows for measuring systems strengthening. The narrow focus of available tools limits their value in ascertaining which interventions result in stronger, more resilient systems. We sought to address this shortcoming by revisiting the current definitions, frameworks and assessment tools related to pharmaceutical systems. We conducted a comprehensive literature review and consulted with select pharmaceutical experts. On the basis of our review, we propose that a pharmaceutical system consists of all structures, people, resources, processes, and their interactions within the broader health system that aim to ensure equitable and timely access to safe, effective, quality pharmaceutical products and related services that promote their appropriate and cost-effective use to improve health outcomes. We further propose that pharmaceutical systems strengthening is the process of identifying and implementing strategies and actions that achieve coordinated and sustainable improvements in the critical components of a pharmaceutical system to make it more responsive and resilient and to enhance its performance for achieving better health outcomes. Finally, we established that, in addition to system performance and resilience, seven components of the pharmaceutical system are critical for measuring pharmaceutical systems strengthening: pharmaceutical products and related services; policy, laws and governance; regulatory systems; innovation, research and development, manufacturing, and trade; financing; human resources; and information. This work adds clarity to the concept of pharmaceutical systems and their

  13. Strengthening materials specifications

    NASA Astrophysics Data System (ADS)

    Sampath, K.

    2005-10-01

    Continuing efforts to strengthen materials specifications readily recognize that a mere compliance with a materials specification only assures a material meeting or exceeding the minimum expectations explicitly detailed in the specification. Implicitly, such efforts also recognize that additional and specific client needs must be addressed as supplementary requirements and introduced during material procurement to reduce risks and assure enhanced performance. This article describes two U.S. Navy-related case studies that allowed further strengthening of the materials specification process, using newer methods and renewed understanding. The first case demonstrates the use of a constraints-based modeling approach to specify the chemical composition of high-performance welding electrodes for critical U.S. Navy applications. This approach helps to distinguish high-performance welding electrode chemical compositions from rich and lean welding electrode chemical compositions that might limit the operational envelope, reduce performance, or both, while increasing overall cost of fabrication but otherwise meet electrode specification requirements. The second case identifies that the size of an ingot could be an important factor while specifying the aluminum and sulfur contents of very large-size, heavy-gauge plates. Renewed understanding of melt fluidity issues associated with the solidification of very large-size ingots shows that deficiencies in through-thickness ductility of heavy-gauge plates are related to controlling aluminum and sulfur contents of the voluminous melt, notwithstanding explicit compliance with specification requirements.

  14. Implementation project : strengthening a continuous steel girder bridge in Lakeport, Texas with post-installed shear connectors : Phase 1 : bridge strengthening design and load testing.

    DOT National Transportation Integrated Search

    2017-03-01

    In Implementation Project 5-6719, a non-composite continuous steel girder bridge located in Lakeport, Texas will be strengthened using techniques developed in TxDOT Research Project 0-6719. This strengthening technique involves the use of post-instal...

  15. Strengthening hospital nursing.

    PubMed

    Buerhaus, Peter I; Needleman, Jack; Mattke, Soeren; Stewart, Maureen

    2002-01-01

    Hospitals, nurses, the media, Congress, and the private sector are increasingly concerned about shortages of registered nurses (RNs) and the impact on safety and quality of patient care. Findings from a growing number of studies provide evidence of a relationship between hospital nurse staffing and adverse outcomes experienced by medical and surgical patients. These findings have policy implications for strengthening the nursing profession, monitoring the quality of hospital care associated with nursing, and improving the relationship between hospitals and the nursing profession.

  16. Experimental Investigation on Strengthening of Bolted Connections in Transmission/Communication Towers

    NASA Astrophysics Data System (ADS)

    Balagopal, R.; Prasad Rao, N.; Rokade, R. P.; Umesha, P. K.

    2018-06-01

    Due to increase in demand for power supply and increase in bandwidth for communication industry, the existing transmission line (TL) and communication towers needs to be strengthened. The strengthening of existing tower is economical rather than installation of new towers due to constraints in acquisition of land. The size of conductors have to be increased or additional number of antenna needs to be installed in existing TL/communication tower respectively. The compression and tension capacity of members in the existing towers have to be increased to sustain the additional loads due to wind and self-weight of these components. The tension capacity enhancement of existing angle sections in live line condition without power shut-down is a challenging task. In the present study, the use of Glass Fiber Reinforced Plastic (GFRP) plate/angle sections is explored to strengthen existing bolted connections in TL/communication towers. Experimental investigation conducted at component level on strengthening of existing two types of single cover steel butt joint, one made of steel plate and another joint made of steel angle sections respectively. First series of experiment conducted on strengthening the connection using GFRP plate/cleat angle sections. The second series of strengthening experiment is conducted using steel plate/angle sections to replace GFRP sections. The load sharing behaviour of strengthened GFRP and steel section is compared and suitable recommendations are given.

  17. Experimental Investigation on Strengthening of Bolted Connections in Transmission/Communication Towers

    NASA Astrophysics Data System (ADS)

    Balagopal, R.; Prasad Rao, N.; Rokade, R. P.; Umesha, P. K.

    2018-02-01

    Due to increase in demand for power supply and increase in bandwidth for communication industry, the existing transmission line (TL) and communication towers needs to be strengthened. The strengthening of existing tower is economical rather than installation of new towers due to constraints in acquisition of land. The size of conductors have to be increased or additional number of antenna needs to be installed in existing TL/communication tower respectively. The compression and tension capacity of members in the existing towers have to be increased to sustain the additional loads due to wind and self-weight of these components. The tension capacity enhancement of existing angle sections in live line condition without power shut-down is a challenging task. In the present study, the use of Glass Fiber Reinforced Plastic (GFRP) plate/angle sections is explored to strengthen existing bolted connections in TL/communication towers. Experimental investigation conducted at component level on strengthening of existing two types of single cover steel butt joint, one made of steel plate and another joint made of steel angle sections respectively. First series of experiment conducted on strengthening the connection using GFRP plate/cleat angle sections. The second series of strengthening experiment is conducted using steel plate/angle sections to replace GFRP sections. The load sharing behaviour of strengthened GFRP and steel section is compared and suitable recommendations are given.

  18. Behaviour of Strengthened RC Frames with Eccentric Steel Braced Frames

    NASA Astrophysics Data System (ADS)

    Kamanli, Mehmet; Unal, Alptug

    2017-10-01

    After devastating earthquakes in recent years, strengthening of reinforced concrete buildings became an important research topic. Reinforced concrete buildings can be strengthened by steel braced frames. These steel braced frames may be made of concentrically or eccentrically indicated in Turkish Earthquake Code 2007. In this study pushover analysis of the 1/3 scaled 1 reinforced concrete frame and 1/3 scaled 4 strengthened reinforced concrete frames with internal eccentric steel braced frames were conducted by SAP2000 program. According to the results of the analyses conducted, load-displacement curves of the specimens were compared and evaluated. Adding eccentric steel braces to the bare frame decreased the story drift, and significantly increased strength, stiffness and energy dissipation capacity. In this strengthening method lateral load carrying capacity, stiffness and dissipated energy of the structure can be increased.

  19. Efficacy of Hip Strengthening Exercises Compared With Leg Strengthening Exercises on Knee Pain, Function, and Quality of Life in Patients With Knee Osteoarthritis.

    PubMed

    Lun, Victor; Marsh, Andrew; Bray, Robert; Lindsay, David; Wiley, Preston

    2015-11-01

    The purpose of this study was to compare the efficacy of hip and leg strengthening exercise programs on knee pain, function, and quality of life (QOL) of patients with knee osteoarthritis (KOA). Single-Blinded Randomized Clinical Trial. Patients with KOA. Male and female subjects were recruited from patients referred to the University of Calgary Sport Medicine Center and from newspaper advertisements. Thirty-seven and 35 patients with KOA were randomly assigned to either a 12-week hip or leg strengthening exercise program, respectively. Both exercise programs consisted of strengthening and flexibility exercises, which were completed 3 to 5 days a week. The first 3 weeks of exercise were supervised and the remaining 9 weeks consisted of at-home exercise. Knee Injury and Osteoarthritis Score (KOOS) and Western Ontario McMaster Arthritis Index (WOMAC) questionnaires, 6-minute walk test, hip and knee range of motion (ROM), and hip and leg muscle strength. Statistically and clinically significant improvements in the KOOS and WOMAC pain subscale scores were observed in both the hip and leg strengthening programs. There was no statistical difference in the change in scores observed between the 2 groups. Equal improvements in the KOOS and WOMAC function and QOL subscales were observed for both programs. There was no change in hip and knee ROM or hip and leg strength in either group. Isolated hip and leg strengthening exercise programs seem to similarly improve knee pain, function, and QOL in patients with KOA. The results of this study show that both hip and leg strengthening exercises improve pain and QOL in patients with KOA and should be incorporated into the exercise prescription of patients with KOA.

  20. Strut deformation in CFRP-strengthened reinforced concrete deep beams.

    PubMed

    Panjehpour, Mohammad; Chai, Hwa Kian; Voo, Yen Lei

    2014-01-01

    Strut-and-tie model (STM) method evolved as one of the most useful designs for shear critical structures and discontinuity regions (D-regions). It provides widespread applications in the design of deep beams as recommended by many codes. The estimation of bottle-shaped strut dimensions, as a main constituent of STM, is essential in design calculations. The application of carbon fibre reinforced polymer (CFRP) as lightweight material with high tensile strength for strengthening D-regions is currently on the increase. However, the CFRP-strengthening of deep beam complicates the dimensions estimation of bottle-shaped strut. Therefore, this research aimed to investigate the effect of CFRP-strengthening on the deformation of RC strut in the design of deep beams. Two groups of specimens comprising six unstrengthened and six CFRP-strengthened RC deep beams with the shear span to the effective depth ratios (a/d) of 0.75, 1.00, 1.25, 1.50, 1.75, and 2.00 were constructed in this research. These beams were tested under four-point bending configuration. The deformation of struts was experimentally evaluated using the values of strain along and perpendicular to the strut centreline. The evaluation was made by the comparisons between unstrengthened and CFRP-strengthened struts regarding the widening and shortening. The key variables were a/d ratio and applied load level.

  1. Research notes : non-destructive evaluation of FRP-strengthened reinforced concrete.

    DOT National Transportation Integrated Search

    2005-04-01

    Many reinforced concrete structures across the country are being strengthened with fiber reinforced polymer (FRP) composites to increase the load capacity. In many cases, composites provide the most cost effective strengthening option, and they do no...

  2. Velocity-strengthening friction significantly affects interfacial dynamics, strength and dissipation

    PubMed Central

    Bar-Sinai, Yohai; Spatschek, Robert; Brener, Efim A.; Bouchbinder, Eran

    2015-01-01

    Frictional interfaces abound in natural and man-made systems, yet their dynamics are not well-understood. Recent extensive experimental data have revealed that velocity-strengthening friction, where the steady-state frictional resistance increases with sliding velocity over some range, is a generic feature of such interfaces. This physical behavior has very recently been linked to slow stick-slip motion. Here we elucidate the importance of velocity-strengthening friction by theoretically studying three variants of a realistic friction model, all featuring identical logarithmic velocity-weakening friction at small sliding velocities, but differ in their higher velocity behaviors. By quantifying energy partition (e.g. radiation and dissipation), the selection of interfacial rupture fronts and rupture arrest, we show that the presence or absence of strengthening significantly affects the global interfacial resistance and the energy release during frictional instabilities. Furthermore, we show that different forms of strengthening may result in events of similar magnitude, yet with dramatically different dissipation and radiation rates. This happens because the events are mediated by rupture fronts with vastly different propagation velocities, where stronger velocity-strengthening friction promotes slower rupture. These theoretical results may have significant implications on our understanding of frictional dynamics. PMID:25598161

  3. A new isometric quadriceps-strengthening exercise using EMG-biofeedback.

    PubMed

    Kesemenli, Cumhur C; Sarman, Hakan; Baran, Tuncay; Memisoglu, Kaya; Binbir, Ismail; Savas, Yilmaz; Isik, Cengiz; Boyraz, Ismail; Koc, Bunyamin

    2014-01-01

    A new isometric contraction quadriceps-strengthening exercise was developed to restore the quadriceps strength lost after knee surgery more rapidly. This study evaluated the results of this new method. Patients were taught to perform the isometric quadriceps-strengthening exercise in the unaffected knee in the supine position, and then they performed it in the affected knee. First, patients were taught the classical isometric quadriceps-strengthening exercise, and then they were taught our new alternative method: "pull the patella superiorly tightly and hold the leg in the same position for 10 seconds". Afterward, the quadriceps contraction was evaluated using a non-invasive Myomed 932 EMG-biofeedback device (Enraf-Nonius, The Netherlands) with gel-containing 48 mm electrodes (Türklab, The Turkey) placed on both knees. The isometric quadriceps-strengthening exercise performed using our new method had stronger contraction than the classical method (P < 0.01). The new method involving pulling the patella superiorly appears to be a better choice, which can be applied easily, leading to better patient compliance and greater quadriceps force after arthroscopic and other knee surgeries.

  4. Design of FRP systems for strengthening concrete girders in shear.

    DOT National Transportation Integrated Search

    2011-06-01

    FRP systems have been used on a project-specific basis for the last two decades. They are now becoming a widely accepted method of : strengthening concrete structures. The acceptance and utilization of these new strengthening techniques depend on the...

  5. Market seen strengthening gradually

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Stremel, K.; Marcus, E.

    1983-12-01

    Rocky Mountain well servicing contractors are expecting a more profitable business next year. Rig utilization has been improving since it's April low, convincing contractors that a gradual strengthening of the market is underway. Contractors have cut overhead expenses drastically, and are surviving on minimal profit levels. There is a growing consensus that rates have to improve if contractors are to maintain equipment and personnel standards.

  6. Engagement in muscular strengthening activities is associated with better sleep

    PubMed Central

    Loprinzi, Paul D.; Loenneke, Jeremy P.

    2015-01-01

    Few studies have examined whether engagement in muscular strengthening activities is associated with sleep duration, which was the purpose of this study. Data from the population-based 2005–2006 National Health and Nutrition Examination Survey were used, which included an analytic sample of 4386 adults (20–85 yrs). Sleep duration and engagement in muscle strengthening activities was self-reported. After adjustments (including aerobic-based physical activity), those engaging in muscular strength activities, compared to those not engaging in muscular strengthening activities, had an 19% increased odds of meeting sleep guidelines (7–8 h/night) (Odds Ratio = 1.19, 95% Confidence Interval: 1.01–1.38, P = 0.04). Promotion of muscular strengthening activities by clinicians should occur not only for improvements in other aspects of health (e.g., cardiovascular benefits), but also to help facilitate optimal sleep duration. PMID:26844170

  7. Relative Activity of Abdominal Muscles during Commonly Prescribed Strengthening Exercises.

    ERIC Educational Resources Information Center

    Willett, Gilbert M.; Hyde, Jennifer E.; Uhrlaub, Michael B.; Wendel, Cara L.; Karst, Gregory M.

    2001-01-01

    Examined the relative electromyographic (EMG) activity of upper and lower rectus abdominis (LRA) and external oblique (EOA) muscles during five abdominal strengthening exercises. Isometric and dynamic EMG data indicated that abdominal strengthening exercises activated various abdominal muscle groups. For the LRA and EOA muscle groups, there were…

  8. Strengthening Performance of PALF-Epoxy Composite Plate on Reinforced Concrete Beams

    NASA Astrophysics Data System (ADS)

    Chin, Siew C.; Tong, Foo S.; Doh, Shu I.; Gimbun, Jolius; Ong, Huey R.; Serigar, Januar P.

    2018-03-01

    This paper presents the effective strengthening potential of pineapple leaves fiber (PALF)-epoxy composite plate on reinforced concrete (RC) beam. At first the PALF is treated with alkali (NaOH) and its morphology is observed via scanning electron microscope (SEM). The composite plates made of PALF and epoxy with fiber loading ranging from 0.1 to 0.4 v/v was tested for its flexural behaviour. The composite was then used for external RC beam strengthening. The structural properties of RC beams were evaluated and all the beams were tested under four-point bending. It was found that the flexural strength increased as the fiber volume ratio increases. The maximum flexural strength (301.94 MPa) was obtained at the fiber volume ratio of 40%. The beam strengthened with PALF-epoxy composite plate has a 7% higher beam capacity compared to the control beam. Cracks formed at the edge of the plate of PALF-strengthened beams resulted in diagonal cracking. Result from this work shows that the PALF-epoxy composite plate has the potential to be used as external strengthening material for RC beam.

  9. A Review on Strengthening Steel Beams Using FRP under Fatigue

    PubMed Central

    Jumaat, Mohd Zamin; Ramli Sulong, N. H.

    2014-01-01

    In recent decades, the application of fibre-reinforced polymer (FRP) composites for strengthening structural elements has become an efficient option to meet the increased cyclic loads or repair due to corrosion or fatigue cracking. Hence, the objective of this study is to explore the existing FRP reinforcing techniques to care for fatigue damaged structural steel elements. This study covers the surface treatment techniques, adhesive curing, and support conditions under cyclic loading including fatigue performance, crack propagation, and failure modes with finite element (FE) simulation of the steel bridge girders and structural elements. FRP strengthening composites delay initial cracking, reduce the crack growth rate, extend the fatigue life, and decrease the stiffness decay with residual deflection. Prestressed carbon fibre-reinforced polymer (CFRP) is the best strengthening option. End anchorage prevents debonding of the CRRP strips at the beam ends by reducing the local interfacial shear and peel stresses. Hybrid-joint, nanoadhesive, and carbon-flex can also be attractive for strengthening systems. PMID:25243221

  10. A review on strengthening steel beams using FRP under fatigue.

    PubMed

    Kamruzzaman, Mohamed; Jumaat, Mohd Zamin; Sulong, N H Ramli; Islam, A B M Saiful

    2014-01-01

    In recent decades, the application of fibre-reinforced polymer (FRP) composites for strengthening structural elements has become an efficient option to meet the increased cyclic loads or repair due to corrosion or fatigue cracking. Hence, the objective of this study is to explore the existing FRP reinforcing techniques to care for fatigue damaged structural steel elements. This study covers the surface treatment techniques, adhesive curing, and support conditions under cyclic loading including fatigue performance, crack propagation, and failure modes with finite element (FE) simulation of the steel bridge girders and structural elements. FRP strengthening composites delay initial cracking, reduce the crack growth rate, extend the fatigue life, and decrease the stiffness decay with residual deflection. Prestressed carbon fibre-reinforced polymer (CFRP) is the best strengthening option. End anchorage prevents debonding of the CRRP strips at the beam ends by reducing the local interfacial shear and peel stresses. Hybrid-joint, nanoadhesive, and carbon-flex can also be attractive for strengthening systems.

  11. 27 CFR 26.69 - Strengthening bonds.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... OF THE TREASURY LIQUORS LIQUORS AND ARTICLES FROM PUERTO RICO AND THE VIRGIN ISLANDS Taxpayment of Liquors and Articles in Puerto Rico Bonds § 26.69 Strengthening bonds. In all cases where the penal sum of...

  12. Cardiovascular fitness strengthening using portable device.

    PubMed

    Alqudah, Hamzah; Kai Cao; Tao Zhang; Haddad, Azzam; Su, Steven; Celler, Branko; Nguyen, Hung T

    2016-08-01

    The paper describes a reliable and valid Portable Exercise Monitoring system developed using TI eZ430-Chronos watch, which can control the exercise intensity through audio stimulation in order to increase the Cardiovascular fitness strengthening.

  13. Oxide-dispersion strengthening of porous powder metalurgy parts

    DOEpatents

    Judkins, Roddie R.

    2002-01-01

    Oxide dispersion strengthening of porous metal articles includes the incorporation of dispersoids of metallic oxides in elemental metal powder particles. Porous metal articles, such as filters, are fabricated using conventional techniques (extrusion, casting, isostatic pressing, etc.) of forming followed by sintering and heat treatments that induce recrystallization and grain growth within powder grains and across the sintered grain contact points. The result is so-called "oxide dispersion strengthening" which imparts, especially, large increases in creep (deformation under constant load) strength to the metal articles.

  14. A simplified method in comparison with comprehensive interaction incremental dynamic analysis to assess seismic performance of jacket-type offshore platforms

    NASA Astrophysics Data System (ADS)

    Zolfaghari, M. R.; Ajamy, A.; Asgarian, B.

    2015-12-01

    The primary goal of seismic reassessment procedures in oil platform codes is to determine the reliability of a platform under extreme earthquake loading. Therefore, in this paper, a simplified method is proposed to assess seismic performance of existing jacket-type offshore platforms (JTOP) in regions ranging from near-elastic to global collapse. The simplified method curve exploits well agreement between static pushover (SPO) curve and the entire summarized interaction incremental dynamic analysis (CI-IDA) curve of the platform. Although the CI-IDA method offers better understanding and better modelling of the phenomenon, it is a time-consuming and challenging task. To overcome the challenges, the simplified procedure, a fast and accurate approach, is introduced based on SPO analysis. Then, an existing JTOP in the Persian Gulf is presented to illustrate the procedure, and finally a comparison is made between the simplified method and CI-IDA results. The simplified method is very informative and practical for current engineering purposes. It is able to predict seismic performance elasticity to global dynamic instability with reasonable accuracy and little computational effort.

  15. Health systems strengthening in German development cooperation: making the case for a comprehensive strategy.

    PubMed

    Munir, Khullat; Worm, Ilse

    2016-12-03

    In the aftermath of the Ebola crisis and with renewed attention to resilient health systems, the process of improving approaches of global health actors to health systems strengthening is of great relevance. Despite the increased amount of attention paid to health systems strengthening, there is no standard definition of this concept among global health actors. Germany is no exception. Though there have been recent commitments to increase resources allocated to health systems strengthening, German Development Cooperation has no comprehensive strategy for its pursuit. This article sheds light on how HSS can be more clearly defined in German bilateral health cooperation, and makes a case for the adoption of a comprehensive HSS strategy.A strategic analysis of the German Development Cooperation's orientation towards health systems strengthening reveals the focal areas and cross-cutting approaches of Germany's engagement with the health systems strengthening. These elements are then linked to the building blocks of the health system, as defined by the World Health Organization. The resulting framework should be further elaborated with data from implementation to develop a comprehensive health systems strengthening strategy. Both the U.S. and U.K. have also recently reviewed their own health systems strengthening efforts and concluded with clear statements on the need for well-defined health systems strengthening strategies. We argue that in developing such strategies, a sound base can be provided by a health systems strengthening framework that is based on both strategic inputs from existing health policies as well as implementation experiences.Despite its limitations, the current framework provided in this review shows how the German Development Cooperation intends to enact health systems strengthening, and can thus have several uses: (1) ensure the systemic nature of health systems strengthening planning and implementation (2) guide the consistency of Germany

  16. 34 CFR 609.1 - What is the Strengthening Historically Black Graduate Institutions Program?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 34 Education 3 2014-07-01 2014-07-01 false What is the Strengthening Historically Black Graduate... GRADUATE INSTITUTIONS PROGRAM General § 609.1 What is the Strengthening Historically Black Graduate Institutions Program? The Strengthening Historically Black Graduate Institutions Program provides grants to the...

  17. 34 CFR 609.1 - What is the Strengthening Historically Black Graduate Institutions Program?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 34 Education 3 2011-07-01 2011-07-01 false What is the Strengthening Historically Black Graduate... GRADUATE INSTITUTIONS PROGRAM General § 609.1 What is the Strengthening Historically Black Graduate Institutions Program? The Strengthening Historically Black Graduate Institutions Program provides grants to the...

  18. 34 CFR 609.1 - What is the Strengthening Historically Black Graduate Institutions Program?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 34 Education 3 2013-07-01 2013-07-01 false What is the Strengthening Historically Black Graduate... GRADUATE INSTITUTIONS PROGRAM General § 609.1 What is the Strengthening Historically Black Graduate Institutions Program? The Strengthening Historically Black Graduate Institutions Program provides grants to the...

  19. 34 CFR 609.1 - What is the Strengthening Historically Black Graduate Institutions Program?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 34 Education 3 2012-07-01 2012-07-01 false What is the Strengthening Historically Black Graduate... GRADUATE INSTITUTIONS PROGRAM General § 609.1 What is the Strengthening Historically Black Graduate Institutions Program? The Strengthening Historically Black Graduate Institutions Program provides grants to the...

  20. Epidemiological investigation of muscle-strengthening activities and cognitive function among older adults.

    PubMed

    Loprinzi, Paul D

    2016-06-01

    Limited research has examined the association of muscle-strengthening activities and executive cognitive function among older adults, which was this study's purpose. Data from the 1999-2002 NHANES were employed (N = 2157; 60-85 years). Muscle-strengthening activities were assessed via self-report, with cognitive function assessed using the digit symbol substitution test. After adjusting for age, age-squared, gender, race-ethnicity, poverty level, body mass index, C-reactive protein, smoking, comorbid illness and physical activity, muscle-strengthening activities were significantly associated with cognitive function (βadjusted = 3.4; 95% CI: 1.7-5.1; P < 0.001). Compared to those not engaging in aerobic exercise and not meeting muscle-strengthening activity guidelines, those doing 1 (βadjusted = 3.7; 95% CI: 1.9-5.4; P < 0.001) and both (βadjusted = 6.6; 95% CI: 4.8-8.3; P < 0.001) of these behaviors had a significantly higher executive cognitive function score. In conclusion, muscle-strengthening activities are associated with executive cognitive function among older U.S. adults, underscoring the importance of promoting both aerobic exercise and muscle-strengthening activities to older adults. © The Author(s) 2016.

  1. A laboratory examination of emotion regulation skill strengthening in borderline personality disorder.

    PubMed

    Metcalfe, Rebecca K; Fitzpatrick, Skye; Kuo, Janice R

    2017-07-01

    This study examined whether individuals with borderline personality disorder (BPD; N = 25) exhibit deficits in their ability to strengthen their emotion regulation skills over time compared with healthy controls (HCs; N = 30). Participants were instructed to implement 1 of 2 different emotion regulation strategies (i.e., distraction and mindful awareness of the emotion) or to either react naturally (i.e., nonregulation condition) in response to BPD-relevant stimuli across multiple trials. Self-reported negativity and positivity, and physiological indices of emotion were collected throughout. Self-report results indicated that both groups displayed strengthening of distraction, but not mindful awareness, compared with the nonregulation condition over time. When comparing the 2 emotion regulation strategies to each other, heart rate data suggested that the rate of skill strengthening varied by group. Specifically, the BPD group evidenced strengthening of mindful awareness, but not distraction, over time whereas the HCs exhibited the opposite pattern. These findings suggest that individuals with BPD generally do not show deficits in their ability to strengthen emotion regulation skills and exhibit greater strengthening of mindful awareness than distraction over time. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  2. Rethinking health research capacity strengthening

    PubMed Central

    Vasquez, Emily; Hirsch, Jennifer S.; Giang, Le Minh; Parker, Richard G.

    2013-01-01

    Health research capacity strengthening (HRCS) is a strategy implemented worldwide to improve the ability of developing countries to tackle the persistent and disproportionate burdens of disease they face. Drawing on a review of existing HRCS literature and our experiences over the course of an NIH-funded HRCS project in Vietnam, we summarise major challenges to the HRCS enterprise at the interpersonal, institutional and macro levels. While over the course of several decades of HRCS initiatives many of these challenges have been well documented, we highlight several considerations that remain under-articulated. We advance critical considerations of the HRCS enterprise by discussing 1) how the organisation of US public health funding shapes the ecology of knowledge production in low- and middle-income country contexts, 2) the barriers US researchers face to effectively collaborating in capacity strengthening for research-to-policy translation, and 3) the potential for unintentional negative consequences if HRCS efforts are not sufficiently reflexive about the limitations of dominant paradigms in public health research and intervention. PMID:23651463

  3. Putting Management Capacity Building at the Forefront of Health Systems Strengthening: Comment on "Management Matters: A Leverage Point for Health Systems Strengthening in Global Health".

    PubMed

    Yeager, Valerie A; Bertrand, Jane

    2015-10-26

    The current limited focus on management in global health activities is highly problematic given the amounts of financial and human resources that are pouring into health system strengthening interventions and the complexity of clinical operations across settings. By ensuring that public health and healthcare practitioners in domestic and international settings receive management training in their educational programs and that we build management capacity among individuals already in the health workforce, we can begin to prepare for more effective health systems strengthening efforts. Rigorous evaluation of health systems strengthening and the impact of management capacity building is crucial to building evidence for the field. © 2016 by Kerman University of Medical Sciences.

  4. Why differentiating between health system support and health system strengthening is needed

    PubMed Central

    Chee, Grace; Pielemeier, Nancy; Lion, Ann; Connor, Catherine

    2013-01-01

    There is increasing recognition that efforts to improve global health cannot be achieved without stronger health systems. Interpretation of health system strengthening (HSS) has varied widely however, with much of the focus to-date on alleviating input constraints, whereas less attention has been given to other performance drivers. It is important to distinguish activities that support the health system, from ones that strengthen the health system. Supporting the health system can include any activity that improves services, from distributing mosquito nets to procuring medicines. These activities improve outcomes primarily by increasing inputs. Strengthening the health system is accomplished by more comprehensive changes to performance drivers such as policies and regulations, organizational structures, and relationships across the health system to motivate changes in behavior and/or allow more effective use of resources to improve multiple health services. Even organizations that have made significant investments in health systems have not provided guidance on what HSS entails. While both supporting and strengthening are important and necessary, it is nonetheless important to make a distinction. If activities fail to produce improvements in system performance because they were incorrectly labeled as system strengthening, the value of HSS investments could quickly be discredited. Not distinguishing supportive activities from strengthening ones will lead to unmet expectations of stronger health systems, as well as neglect of critical system strengthening activities. Distinguishing between these two types of activities will improve programming impact. Copyright © 2012 John Wiley & Sons, Ltd. PMID:22777839

  5. Strengthening a consolidated memory: the key role of the reconsolidation process.

    PubMed

    Forcato, Cecilia; Fernandez, Rodrigo S; Pedreira, María E

    2014-01-01

    The reconsolidation hypothesis posits that the presentation of a specific cue, previously associated with a life event, makes the stored memory pass from a stable to a reactivated state. In this state, memory is again labile and susceptible to different agents, which may either damage or improve the original memory. Such susceptibility decreases over time and leads to a re-stabilization phase known as reconsolidation process. This process has been assigned two biological roles: memory updating, which suggests that destabilization of the original memory allows the integration of new information into the background of the original memory; and memory strengthening, which postulates that the labilization-reconsolidation process strengthens the original memory. The aim of this review is to analyze the strengthening as an improvement obtained only by triggering such process without any other treatment. In our lab, we have demonstrated that when triggering the labilization-reconsolidation process at least once the original memory becomes strengthened and increases its persistence. We have also shown that repeated labilization-reconsolidation processes strengthened the original memory by enlarging its precision, and said reinforced memories were more resistant to interference. Finally, we have shown that the strengthening function is not operative in older memories. We present and discuss both our findings and those of others, trying to reveal the central role of reconsolidation in the modification of stored information. Copyright © 2014 Elsevier Ltd. All rights reserved.

  6. Strengthening health system to improve immunization for migrants in China.

    PubMed

    Fang, Hai; Yang, Li; Zhang, Huyang; Li, Chenyang; Wen, Liankui; Sun, Li; Hanson, Kara; Meng, Qingyue

    2017-07-01

    Immunization is the most cost-effective method to prevent and control vaccine-preventable diseases. Migrant population in China has been rising rapidly, and their immunization status is poor. China has tried various strategies to strengthen its health system, which has significantly improved immunization for migrants. This study applied a qualitative retrospective review method aiming to collect, analyze and synthesize health system strengthening experiences and practices about improving immunizations for migrants in China. A conceptual framework of Theory of Change was used to extract the searched literatures. 11 searched literatures and 4 national laws and policies related to immunizations for migrant children were carefully studied. China mainly employed 3 health system strengthening strategies to significantly improve immunization for migrant population: stop charging immunization fees or immunization insurance, manage immunization certificates well, and pay extra attentions on immunization for special children including migrant children. These health system strengthening strategies were very effective, and searched literatures show that up-to-date and age-appropriate immunization rates were significantly improved for migrant children. Economic development led to higher migrant population in China, but immunization for migrants, particularly migrant children, were poor. Fortunately various health system strengthening strategies were employed to improve immunization for migrants in China and they were rather successful. The experiences and lessons of immunization for migrant population in China might be helpful for other developing countries with a large number of migrant population.

  7. 78 FR 38053 - Regulatory Systems Strengthening

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-25

    ... Science Policy Analysis/Office of International Programs, HFG-1, Food and Drug Administration, 10903 New... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2013-N-0010] Regulatory Systems Strengthening AGENCY: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food...

  8. Application of FBG sensors in strengthening and maintenance monitoring of old bridges

    NASA Astrophysics Data System (ADS)

    Yue, Li-na; Huang, Jun; Yang, Yan

    2009-10-01

    The various fiber Bragg grating(FBG)sensors such as FBG force rings, differential FBG displacement cells, FBG strain sensors and FBG temperature sensors had been used to monitor the strengthening and maintenance process of the continuous concrete beam bridges and the continuous concrete rigid frame bridges which are the part of Wuhan Second Yangtze River Bridge. In the strengthening and maintenance process, the tension force of the external prestressed tendons, the cracks change and intensity of cross sections had been monitored to insure the instruction safety, study the effect of strengthening and maintenance, and verify the design theories of strengthening and maintenance. Also the reference state criterion for long-term bridge health monitoring had been provided according to the monitoring results.

  9. An Experimental Study on Strengthening of Reinforced Concrete Flexural Members using Steel Wire Mesh

    NASA Astrophysics Data System (ADS)

    Al Saadi, Hamza Salim Mohammed; Mohandas, Hoby P.; Namasivayam, Aravind

    2017-01-01

    One of the major challenges and contemporary research in the field of structural engineering is strengthening of existing structural elements using readily available materials in the market. Several investigations were conducted on strengthening of various structural components using traditional and advanced materials. Many researchers tried to enhance the reinforced concrete (RC) beams strength using steel plate, Glass and Carbon Fibre Reinforced Polymers (GFRP & CFRP). For the reason that high weight to the strength ratio and compatibility in strength between FRP composites and steel bars, steel plates and GFRP and CFRP composites are not used for strengthening works practically. Hence, in this present work the suitability of using wire mesh for the purpose of strengthening the RC flexural members is studied by conducting experimental works. New technique of strengthening system using wire mesh with a view to improve sectional properties and subsequently flexural strength of RC beams is adopted in this work. The results for experimental and theoretical analysis were compared and found that good correlation exists between them. The experimental results indicate that RC beams strengthened with steel wire mesh are easy technique for strengthening of existing flexural members.

  10. Strengthening health workforce capacity through work-based training

    PubMed Central

    2013-01-01

    Background Although much attention has been given to increasing the number of health workers, less focus has been directed at developing models of training that address real-life workplace needs. Makerere University School of Public Health (MakSPH) with funding support from the Centers for Disease Control and Prevention (CDC) developed an eight-month modular, in-service work-based training program aimed at strengthening the capacity for monitoring and evaluation (M&E) and continuous quality improvement (CQI) in health service delivery. Methods This capacity building program, initiated in 2008, is offered to in-service health professionals working in Uganda. The purpose of the training is to strengthen the capacity to provide quality health services through hands-on training that allows for skills building with minimum work disruptions while encouraging greater involvement of other institutional staff to enhance continuity and sustainability. The hands-on training uses practical gaps and challenges at the workplace through a highly participatory process. Trainees work with other staff to design and implement ‘projects’ meant to address work-related priority problems, working closely with mentors. Trainees’ knowledge and skills are enhanced through short courses offered at specific intervals throughout the course. Results Overall, 143 trainees were admitted between 2008 and 2011. Of these, 120 (84%) from 66 institutions completed the training successfully. Of the trainees, 37% were Social Scientists, 34% were Medical/Nursing/Clinical Officers, 5.8% were Statisticians, while 23% belonged to other professions. Majority of the trainees (80%) were employed by Non-Government Organizations while 20% worked with the public health sector. Trainees implemented 66 projects which addressed issues such as improving access to health care services; reducing waiting time for patients; strengthening M&E systems; and improving data collection and reporting. The projects

  11. Nanoscale strengthening mechanisms in metallic thin film systems

    NASA Astrophysics Data System (ADS)

    Schoeppner, Rachel Lynn

    Nano-scale strengthening mechanisms for thin films were investigated for systems governed by two different strengthening techniques: nano-laminate strengthening and oxide dispersion strengthening. Films were tested under elevated temperature conditions to investigate changes in deformation mechanisms at different operating temperatures, and the structural stability. Both systems exhibit remarkable stability after annealing and thus long-term reliability. Nano-scale metallic multilayers with smaller layer thicknesses show a greater relative resistance to decreasing strength at higher temperature testing conditions than those with larger layer thicknesses. This is seen in both Cu/Ni/Nb multilayers as well as a similar tri-component bi-layer system (Cu-Ni/Nb), which removed the coherent interface from the film. Both nanoindentation and micro-pillar compression tests investigated the strain-hardening ability of these two systems to determine what role the coherent interface plays in this mechanism. Tri-layer films showed a higher strain-hardening ability as the layer thickness decreased and a higher strain-hardening exponent than the bi-layer system: verifying the presence of a coherent interface increases the strain-hardening ability of these multilayer systems. Both systems exhibited hardening of the room temperature strength after annealing, suggesting a change in microstructure has occurred, unlike that seen in other multilayer systems. Oxide dispersion strengthened Au films showed a marked increase in hardness and wear resistance with the addition of ZnO particles. The threshold for stress-induced grain-refinement as opposed to grain growth is seen at concentrations of at least 0.5 vol%. These systems exhibited stable microstructures during thermal cycling in films containing at least 1.0%ZnO. Nanoindentation experiments show the drop in hardness following annealing is almost completely attributed to the resulting grain growth. Four-point probe resistivity

  12. Seismic Strengthening of Carpentry Joints in Traditional Timber Structures

    NASA Astrophysics Data System (ADS)

    Parisi, Maria A.; Cordié, Cinzia; Piazza, Maurizio

    2008-07-01

    The static and dynamic behavior of timber structures largely depends on their connections. In traditional timber construction, elements are usually connected with carpentry joints based on contact pressure and friction, often with only minor reinforcement generically intended to avoid disassembling. In current practice, interventions for the upgrading of carpentry joints are mainly based on empirical knowledge according to tradition. Often they produce a general strengthening of the connection, but are not specific for the case of seismic action. Strengthening on heuristic bases may be only partially effective or possibly disproportioned. The behavior of the carpentry joints most used in roof structures is examined. The birdsmouth joint, connecting rafters to the tie beam, has been studied first, characterizing its behavior numerically and experimentally in monotonic and cyclic conditions. Other forms of the rafter-to-tie connection, the double notch joint and the case of parallel rafters, are discussed. Some general criteria for the seismic strengthening of these joints are presented.

  13. Dependence of the friction strengthening of graphene on velocity.

    PubMed

    Zeng, Xingzhong; Peng, Yitian; Liu, Lei; Lang, Haojie; Cao, Xing'an

    2018-01-25

    Graphene shows great potential applications as a solid lubricant in micro- and nanoelectromechanical systems (MEMS/NEMS). An atomic-scale friction strengthening effect in a few initial atomic friction periods usually occurred on few-layer graphene. Here, velocity dependent friction strengthening was observed in atomic-scale frictional behavior of graphene by atomic force microscopy (AFM). The degree of the friction strengthening decreases with the increase of velocity first and then reaches a plateau. This could be attributed to the interaction potential between the tip and graphene at high velocity which is weaker than that at low velocity, because the strong tip-graphene contact interface needs a longer time to evolve. The subatomic-scale stick-slip behavior in the conventional stick-slip motion supports the weak interaction between the tip and graphene at high velocity. These findings can provide a deeper understanding of the atomic-scale friction mechanism of graphene and other two-dimensional materials.

  14. Muscle-Strengthening Activities and Participation among Adults in the United States

    ERIC Educational Resources Information Center

    Loustalot, Fleetwood; Carlson, Susan A.; Kruger, Judy; Buchner, David M.; Fulton, Janet E.

    2013-01-01

    Purpose: To describe those who reported meeting the "2008 Physical Activity Guidelines for Americans" ("2008 Guidelines") muscle-strengthening standard of 2 or more days per week, including all seven muscle groups, and to assess the type and location of muscle-strengthening activities performed. Method: Data from HealthStyles…

  15. Process for the synthesis of nanophase dispersion-strengthened aluminum alloy

    DOEpatents

    Barbour, John C.; Knapp, James Arthur; Follstaedt, David Martin; Myers, Samuel Maxwell

    1998-12-15

    A process for fabricating dispersion-strengthened ceramic-metal composites is claimed. The process comprises in-situ interaction and chemical reaction of a metal in gaseous form with a ceramic producer in plasma form. Such composites can be fabricated with macroscopic dimensions. Special emphasis is placed on fabrication of dispersion-strengthened aluminum oxide-aluminum composites, which can exhibit flow stresses more characteristic of high strength steel.

  16. Adaptive force regulation of muscle strengthening rehabilitation device with magnetorheological fluids.

    PubMed

    Dong, Shufang; Lu, Ke-Qian; Sun, Jian Qiao; Rudolph, Katherine

    2006-03-01

    In rehabilitation from neuromuscular trauma or injury, strengthening exercises are often prescribed by physical therapists to recover as much function as possible. Strengthening equipment used in clinical settings range from low-cost devices, such as sandbag weights or elastic bands to large and expensive isotonic and isokinetic devices. The low-cost devices are incapable of measuring strength gains and apply resistance based on the lowest level of torque that is produced by a muscle group. Resistance that varies with joint angle can be achieved with isokinetic devices in which angular velocity is held constant and variable torque is generated when the patient attempts to move faster than the device but are ineffective if a patient cannot generate torque rapidly. In this paper, we report the development of a versatile rehabilitation device that can be used to strengthen different muscle groups based on the torque generating capability of the muscle that changes with joint angle. The device is low cost, is smaller than other commercially available machines, and can be programmed to apply resistance that is unique to a particular patient and that will optimize strengthening. The core of the device, a damper with smart magnetorheological fluids, provides passive exercise force. A digital adaptive control is capable of regulating exercise force precisely following the muscle strengthening profile prescribed by a physical therapist. The device could be programmed with artificial intelligence to dynamically adjust the target force profile to optimize rehabilitation effects. The device provides both isometric and isokinetic strength training and can be developed into a small, low-cost device that may be capable of providing optimal strengthening in the home.

  17. International cooperation strengthens all our peoples

    USDA-ARS?s Scientific Manuscript database

    This article highlights two excellent examples of international cooperation that strengthens research and research outcomes that impact all of us – no matter where we sit. In arid Jordan, water scarcity is a great challenge, made even greater by displacement of populations due to war and by climate ...

  18. Review of Research and Application of Reinforced Concrete Structures Strengthened by Braces

    NASA Astrophysics Data System (ADS)

    Gong, Jing; Zhu, Zezhong; Zeng, Cong

    2017-06-01

    Many of RC frame structures are urgently needed to be strengthened and maintained due to the increase of service life, the change of use function, and the impact of natural disasters. This paper reviews the research status of strengthening RC structures with braces; introduces the features and connection forms of joints connecting with braces; summarizes the engineering application of buckling-restrained braces, pointing out that buckling-restrained brace is an effective means to strengthen the RC frame structures with more reliable performance and broad application prospect.

  19. Strengthening Collaboration for Successful Field Experiences

    ERIC Educational Resources Information Center

    Potter, Jalene P.; Hollas, Tori; Coyne, Jaime

    2016-01-01

    Because a majority of teachers come from public universities, universities play an important role in examining and strengthening their teacher preparation programs to ensure they are graduating quality teachers. Student teaching is typically the culminating experience of the teacher preparation program and is considered to be the most crucial and…

  20. Age-Strengthening of Cast Iron and Its Effects on Machinability: Review of the Literature

    NASA Astrophysics Data System (ADS)

    Richards, Von L.

    This presentation is a review of the research performed over several years to characterize the age-strengthening behavior of graphitic cast iron alloys (gray iron, ductile iron and CG iron.) Nitrogen in metastable solid solution in ferrite is necessary for the age strengthening to occur, similar to quench aging of steels. The activation energy for age strengthening is similar to that for diffusion of nitrogen. Age-strengthening can occur even if the ferrite is present as a phase in pearlite. However, machinability benefits only occur when there is free ferrite in the microstructure.

  1. Experimental investigation on dynamic characteristics and strengthening mechanism of laser-induced cavitation bubbles.

    PubMed

    Ren, X D; He, H; Tong, Y Q; Ren, Y P; Yuan, S Q; Liu, R; Zuo, C Y; Wu, K; Sui, S; Wang, D S

    2016-09-01

    The dynamic features of nanosecond laser-induced cavitation bubbles near the light alloy boundary were investigated with the high-speed photography. The shock-waves and the dynamic characteristics of the cavitation bubbles generated by the laser were detected using the hydrophone. The dynamic features and strengthening mechanism of cavitation bubbles were studied. The strengthening mechanisms of cavitation bubble were discussed when the relative distance parameter γ was within the range of 0.5-2.5. It showed that the strengthening mechanisms caused by liquid jet or shock-waves depended on γ much. The research results provided a new strengthening method based on laser-induced cavitation shotless peening (CSP). Copyright © 2016 Elsevier B.V. All rights reserved.

  2. Accessing Colony Boundary Strengthening of Fully Lamellar TiAl Alloys via Micromechanical Modeling

    PubMed Central

    Bargmann, Swantje

    2017-01-01

    In this article, we present a strategy to decouple the relative influences of colony, domain and lamella boundary strengthening in fully lamellar titanium aluminide alloys, using a physics-based crystal plasticity modeling strategy. While lamella and domain boundary strengthening can be isolated in experiments using polysynthetically twinned crystals or mircomechanical testing, colony boundary strengthening can only be investigated in specimens in which all three strengthening mechanisms act simultaneously. Thus, isolating the colony boundary strengthening Hall–Petch coefficient KC experimentally requires a sufficient number of specimens with different colony sizes λC but constant lamella thickness λL and domain size λD, difficult to produce even with sophisticated alloying techniques. The here presented crystal plasticity model enables identification of the colony boundary strengthening coefficient KC as a function of lamella thickness λL. The constitutive description is based on the model of a polysynthetically twinned crystal which is adopted to a representative volume element of a fully lamellar microstructure. In order to capture the micro yield and subsequent micro hardening in weakly oriented colonies prior to macroscopic yield, the hardening relations of the adopted model are revised and calibrated against experiments with polysynthetically twinned crystals for plastic strains up to 15%. PMID:28771218

  3. Accessing Colony Boundary Strengthening of Fully Lamellar TiAl Alloys via Micromechanical Modeling.

    PubMed

    Schnabel, Jan Eike; Bargmann, Swantje

    2017-08-03

    In this article, we present a strategy to decouple the relative influences of colony, domain and lamella boundary strengthening in fully lamellar titanium aluminide alloys, using a physics-based crystal plasticity modeling strategy. While lamella and domain boundary strengthening can be isolated in experiments using polysynthetically twinned crystals or mircomechanical testing, colony boundary strengthening can only be investigated in specimens in which all three strengthening mechanisms act simultaneously. Thus, isolating the colony boundary strengthening Hall-Petch coefficient K C experimentally requires a sufficient number of specimens with different colony sizes λ C but constant lamella thickness λ L and domain size λ D , difficult to produce even with sophisticated alloying techniques. The here presented crystal plasticity model enables identification of the colony boundary strengthening coefficient K C as a function of lamella thickness λ L . The constitutive description is based on the model of a polysynthetically twinned crystal which is adopted to a representative volume element of a fully lamellar microstructure. In order to capture the micro yield and subsequent micro hardening in weakly oriented colonies prior to macroscopic yield, the hardening relations of the adopted model are revised and calibrated against experiments with polysynthetically twinned crystals for plastic strains up to 15%.

  4. Fatigue behaviour analysis for the durability prequalification of strengthening mortars

    NASA Astrophysics Data System (ADS)

    Bocca, P.; Grazzini, A.; Masera, D.

    2011-07-01

    An innovative laboratory procedure used as a preliminary design stage for the pre-qualification of strengthening mortars applied to historical masonry buildings is described. In the analysis of the behaviour of masonry structures and their constituent materials, increasing importance has been assumed by the study of the long-term evolution of deformation and mechanical characteristics, which may be affected by both loading and environmental conditions. Through static and fatigue tests on mixed specimens historical brick-reinforced mortar it has been possible to investigate the durability of strengthening materials, in order to select, from a range of alternatives, the most suitable for the historical masonry. Cyclic fatigue stress has been applied to accelerate the static creep and to forecast the corresponding creep behaviour of the historical brick-strengthening mortar system under static long-time loading. This methodology has proved useful in avoiding the errors associated with materials that are not mechanically compatible and guarantees the durability of strengthening work. The experimental procedure has been used effectively in the biggest restoration building site in Europe, the Royal Palace of Venaria, and it is in progress of carrying out at the Special Natural Reserve of the Sacro Monte di Varallo, in Piedmont (Italy).

  5. Strengthening health systems by health sector reforms.

    PubMed

    Senkubuge, Flavia; Modisenyane, Moeketsi; Bishaw, Tewabech

    2014-01-01

    The rising burden of disease and weak health systems are being compounded by the persistent economic downturn, re-emerging diseases, and violent conflicts. There is a growing recognition that the global health agenda needs to shift from an emphasis on disease-specific approaches to strengthening of health systems, including dealing with social, environmental, and economic determinants through multisectoral responses. A review and analysis of data on strengthening health sector reform and health systems was conducted. Attention was paid to the goal of health and interactions between health sector reforms and the functions of health systems. Further, we explored how these interactions contribute toward delivery of health services, equity, financial protection, and improved health. Health sector reforms cannot be developed from a single global or regional policy formula. Any reform will depend on the country's history, values and culture, and the population's expectations. Some of the emerging ingredients that need to be explored are infusion of a health systems agenda; development of a comprehensive policy package for health sector reforms; improving alignment of planning and coordination; use of reliable data; engaging 'street level' policy implementers; strengthening governance and leadership; and allowing a holistic and developmental approach to reforms. The process of reform needs a fundamental rather than merely an incremental and evolutionary change. Without radical structural and systemic changes, existing governance structures and management systems will continue to fail to address the existing health problems.

  6. Strengthening health systems by health sector reforms

    PubMed Central

    Senkubuge, Flavia; Modisenyane, Moeketsi; Bishaw, Tewabech

    2014-01-01

    Background The rising burden of disease and weak health systems are being compounded by the persistent economic downturn, re-emerging diseases, and violent conflicts. There is a growing recognition that the global health agenda needs to shift from an emphasis on disease-specific approaches to strengthening of health systems, including dealing with social, environmental, and economic determinants through multisectoral responses. Methods A review and analysis of data on strengthening health sector reform and health systems was conducted. Attention was paid to the goal of health and interactions between health sector reforms and the functions of health systems. Further, we explored how these interactions contribute toward delivery of health services, equity, financial protection, and improved health. Findings Health sector reforms cannot be developed from a single global or regional policy formula. Any reform will depend on the country's history, values and culture, and the population's expectations. Some of the emerging ingredients that need to be explored are infusion of a health systems agenda; development of a comprehensive policy package for health sector reforms; improving alignment of planning and coordination; use of reliable data; engaging ‘street level’ policy implementers; strengthening governance and leadership; and allowing a holistic and developmental approach to reforms. Conclusions The process of reform needs a fundamental rather than merely an incremental and evolutionary change. Without radical structural and systemic changes, existing governance structures and management systems will continue to fail to address the existing health problems. PMID:24560261

  7. Preparation of Si and O co-solution strengthened Ti alloys by using rice husks as SiO2 resource and quantitative descriptions on their strengthening effects

    NASA Astrophysics Data System (ADS)

    Jia, Lei; Chen, Jiang-xian; Lu, Zhen-lin; Li, Shu-feng; Umeda, Junko; Kondoh, Katsuyoshi

    2018-04-01

    Ti alloys strengthened by both Si and O solutes were prepared by powder metallurgy method from pure Ti and amorphous SiO2 powder obtained by combusting rice husks. At the same time, Ti alloys singly strengthened by Si or O were also prepared for studying the strengthening effect of Si and O solutes. Results showed that amorphous SiO2 powder originated from rice husks could almost fully dissolve into pure Ti matrix when the content was not higher than 1.0 wt%, while higher content of SiO2 addition resulted in the formation of Ti5Si3 intermetallics. Si and O elements leaded to negative and positive distortion of Ti lattice, and the influencing degrees were ‑0.02 and +0.014 Å/wt% for lattice constant a, while ‑0.05 and +0.046 Å/wt% for constant c, respectively. Solid solution of Si and O would also result in the increase of hardness, which was 98.5 and 209.43 HV/wt%, respectively. When Si and O were co-exsited in Ti matrix, the negative and positive distortion cancelled each other, while the strengthening effect did not cancel but enhance each other.

  8. Muscle strengthening activity associates with reduced all-cause mortality in COPD.

    PubMed

    Loprinzi, Paul D; Sng, Eveleen; Walker, Jerome F

    2017-06-01

    Objective Emerging research suggests that aerobic-based physical activity may help to promote survival among chronic obstructive pulmonary disease patients. However, the extent to which engagement in resistance training on survival among chronic obstructive pulmonary disease patients is relatively unknown. Therefore, the purpose of this study was to examine the independent associations of muscle strengthening activities on all-cause mortality among a national sample of U.S. adults with chronic obstructive pulmonary disease. We hypothesize that muscle strengthening activities will be inversely associated with all-cause mortality. Methods Data from the 2003-2006 NHANES were employed, with follow-up through 2011. Aerobic-based physical activity was objectively measured via accelerometry, muscle strengthening activities engagement was assessed via self-report, and chronic obstructive pulmonary disease was assessed via physician-diagnosis. Results Analysis included 385 adults (20 + yrs) with chronic obstructive pulmonary disease, who represent 13.3 million chronic obstructive pulmonary disease patients in the USA. The median follow-up period was 78 months (IQR=64-90), with 82 chronic obstructive pulmonary disease patients dying during this period. For a two muscle strengthening activity sessions/week increase (consistent with national guidelines), chronic obstructive pulmonary disease patients had a 29% reduced risk of all-cause mortality (HR=0.71; 95% CI: 0.51-0.99; P = 0.04). Conclusion Participation in muscle strengthening activities, independent of aerobic-based physical activity and other potential confounders, is associated with greater survival among chronic obstructive pulmonary disease patients.

  9. 48 CFR 970.5223-6 - Executive Order 13423, Strengthening Federal Environmental, Energy, and Transportation Management.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ..., Strengthening Federal Environmental, Energy, and Transportation Management. 970.5223-6 Section 970.5223-6... Contracts 970.5223-6 Executive Order 13423, Strengthening Federal Environmental, Energy, and Transportation... contracts for the operation of a DOE facility or motor vehicle fleet. Executive Order 13423, Strengthening...

  10. 48 CFR 970.5223-6 - Executive Order 13423, Strengthening Federal Environmental, Energy, and Transportation Management.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ..., Strengthening Federal Environmental, Energy, and Transportation Management. 970.5223-6 Section 970.5223-6... Contracts 970.5223-6 Executive Order 13423, Strengthening Federal Environmental, Energy, and Transportation... contracts for the operation of a DOE facility or motor vehicle fleet. Executive Order 13423, Strengthening...

  11. 48 CFR 970.5223-6 - Executive Order 13423, Strengthening Federal Environmental, Energy, and Transportation Management.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ..., Strengthening Federal Environmental, Energy, and Transportation Management. 970.5223-6 Section 970.5223-6... Contracts 970.5223-6 Executive Order 13423, Strengthening Federal Environmental, Energy, and Transportation... contracts for the operation of a DOE facility or motor vehicle fleet. Executive Order 13423, Strengthening...

  12. 48 CFR 970.5223-6 - Executive Order 13423, Strengthening Federal Environmental, Energy, and Transportation Management.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ..., Strengthening Federal Environmental, Energy, and Transportation Management. 970.5223-6 Section 970.5223-6... Contracts 970.5223-6 Executive Order 13423, Strengthening Federal Environmental, Energy, and Transportation... contracts for the operation of a DOE facility or motor vehicle fleet. EXECUTIVE ORDER 13423, STRENGTHENING...

  13. Novel percolation phenomena and mechanism of strengthening elastomers by nanofillers.

    PubMed

    Wang, Zhenhua; Liu, Jun; Wu, Sizhu; Wang, Wenchuan; Zhang, Liqun

    2010-03-28

    Nano-strengthening by employing nanoparticles is necessary for high-efficiency strengthening of elastomers, which has already been validated by numerous researches and industrial applications, but the underlying mechanism is still an open challenge. In this work, we mainly focus our attention on studying the variation of the tensile strength of nanofilled elastomers by gradually increasing the filler content, within a low loading range. Interestingly, the percolation phenomenon is observed in the relationship between the tensile strength and the filler loading, which shares some similarities with the percolation phenomenon occurring in rubber toughened plastics. That is, as the loading of nanofillers (carbon black, zinc oxide) increases, the tensile strength of rubber nanocomposites (SBR, EPDM) increases slowly at first, then increases abruptly and finally levels off. Meanwhile, the bigger the particle size, the higher the filler content at the percolation point, and the lower the corresponding tensile strength of rubber nanocomposites. The concept of a critical particle-particle distance (CPD) is proposed to explain the observed percolation phenomenon. It is suggested that rubber strengthening through nanoparticles is attributed to the formation of stretched straight polymer chains between neighbor particles, induced by the slippage of adsorbed polymer chains on the filler surface during tension. Meanwhile, the factors to govern this CPD and the critical minimum particle size (CMPS) figured out in this work are both discussed and analyzed in detail. Within the framework of this percolation phenomenon, this paper also clearly answers two important and intriguing issues: (1) why is it necessary and essential to strengthen elastomers through nanofillers; (2) why does it need enough loading of nanofillers to effectively strengthen elastomers. Moreover, on the basis of the percolation phenomenon, we give out some guidance for reinforcement design of rubbery materials

  14. Strengthening community participation in reducing GHG emission from forest and peatland fire

    NASA Astrophysics Data System (ADS)

    Thoha, A. S.; Saharjo, B. H.; Boer, R.; Ardiansyah, M.

    2018-02-01

    Strengthening community participation is needed to find solutions to encourage community more participate in reducing Green House Gas (GHG) from forest and peatland fire. This research aimed to identify stakeholders that have the role in forest and peatland fire control and to formulate strengthening model of community participation through community-based early warning fire. Stakeholder mapping and action research were used to determine stakeholders that had potential influence and interest and to formulate strengthening model of community participation in reducing GHG from forest and peatland fire. There was found that position of key players in the mapping of stakeholders came from the government institution. The existence of community-based fire control group can strengthen government institution through collaborating with stakeholders having strong interest and influence. Moreover, it was found several local knowledge in Kapuas District about how communities predict drought that have potential value for developing the community-based early warning fire system. Formulated institutional model in this research also can be further developed as a model institution in the preservation of natural resources based on local knowledge. In conclusion, local knowledge and community-based fire groups can be integrated within strengthening model of community participation in reducing GHG from forest and peatland fire.

  15. Full Scale RC Beam-Column Joints Strengthened with Steel Reinforced Polymer Systems

    NASA Astrophysics Data System (ADS)

    De Vita, Alessandro; Napoli, Annalisa; Realfonzo, Roberto

    2017-07-01

    This paper presents the results of an experimental campaign performed at the Laboratory of Materials and Structural Testing of the University of Salerno (Italy) in order to investigate the seismic performance of RC beam-column joints strengthened with Steel Reinforced Polymer (SRP) systems. With the aim to represent typical façade frames’ beam-column subassemblies found in existing RC buildings, specimens were provided with two short beam stubs orthogonal to the main beam and were designed with inadequate seismic details. Five members were strengthened by using two different SRP layouts while the remaining ones were used as benchmarks. Once damaged, two specimens were also repaired, retrofitted with SRP and subjected to cyclic test again. The results of cyclic tests performed on SRP strengthened joints are examined through a comparison with the outcomes of the previous experimental program including companion specimens not provided with transverse beam stubs and strengthened by Carbon Fiber Reinforced Polymer (CFRP) systems. In particular, both qualitative and quantitative considerations about the influence of the confining effect provided by the secondary beams on the joint response, the suitability of all the adopted strengthening solutions (SRP/CFRP systems), the performances and the failure modes experienced in the several cases studied are provided.

  16. 34 CFR 608.1 - What is the Strengthening Historically Black Colleges and Universities (HBCU) Program?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 34 Education 3 2011-07-01 2011-07-01 false What is the Strengthening Historically Black Colleges... Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION STRENGTHENING HISTORICALLY BLACK COLLEGES AND UNIVERSITIES PROGRAM General § 608.1 What is the Strengthening Historically...

  17. 34 CFR 608.1 - What is the Strengthening Historically Black Colleges and Universities (HBCU) Program?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 34 Education 3 2013-07-01 2013-07-01 false What is the Strengthening Historically Black Colleges... Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION STRENGTHENING HISTORICALLY BLACK COLLEGES AND UNIVERSITIES PROGRAM General § 608.1 What is the Strengthening Historically...

  18. 34 CFR 608.1 - What is the Strengthening Historically Black Colleges and Universities (HBCU) Program?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 34 Education 3 2014-07-01 2014-07-01 false What is the Strengthening Historically Black Colleges... Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION STRENGTHENING HISTORICALLY BLACK COLLEGES AND UNIVERSITIES PROGRAM General § 608.1 What is the Strengthening Historically...

  19. 34 CFR 608.1 - What is the Strengthening Historically Black Colleges and Universities (HBCU) Program?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 34 Education 3 2012-07-01 2012-07-01 false What is the Strengthening Historically Black Colleges... Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION STRENGTHENING HISTORICALLY BLACK COLLEGES AND UNIVERSITIES PROGRAM General § 608.1 What is the Strengthening Historically...

  20. Strengthening Family Practices for Latino Families

    ERIC Educational Resources Information Center

    Chartier, Karen G.; Negroni, Lirio K.; Hesselbrock, Michie N.

    2010-01-01

    This study examined the effectiveness of a culturally adapted Strengthening Families Program (SFP) for Latinos to reduce risks for alcohol and drug use in children. Latino families, predominantly Puerto Rican, with a 9- to 12-year-old child and a parent(s) with a substance abuse problem participated in the study. Pre- and post-tests were conducted…

  1. Behavior of Insulated Carbon-FRP-Strengthened RC Beams Exposed to Fire

    NASA Astrophysics Data System (ADS)

    Sayin, B.

    2014-09-01

    There are two main approaches to improving the fire resistance of fiber-reinforced polymer (FRP) systems. While the most common method is to protect or insulate the FRP system, an other way is to use fibers and resins with a better fire performance. This paper presents a numerical investigation into the five protection behavior of insulated carbon-fiber-reinforced-polymer (CFRP)-strengthened reinforced concrete (RC) beams. The effects of external loading and thermal expansion of materials at elevated temperatures are taken into consideration in a finite-element model. The validity of the numerical model is demonstrated with results from an existing experimental study on insulated CFRP-strengthened RC beams. Conclusions of this investigation are employed to predict the structural behavior of CFRP-strengthened concrete structures.

  2. Study of a reinforced concrete beam strengthened using a combination of SMA wire and CFRP plate

    NASA Astrophysics Data System (ADS)

    Liu, Zhi-qiang; Li, Hui

    2006-03-01

    Traditional methods used for strengthening of reinforced concrete (RC) structures, such as bonding of steel plates, suffer from inherent disadvantages. In recent years, strengthening of RC structures using carbon fiber reinforced polymer (CFRP) plates has attracted considerable attentions around the world. Most existing research on CFRP plate bonding for flexural strengthening of RC beams has been carried out for the strength enhancement. However, little research is focused on effect of residual deformations on the strengthening. The residual deformations have an important effect on the strengthening by CFRP plates. There exists a very significant challenge how the residual deformations are reduced. Shape memory alloy (SMA) has showed outstanding functional properties as an actuator. It is a possibility that SMA can be used to reduce the residual deformation and make cracks of concrete close by imposing the recovery forces on the concrete in the tensile zone. It is only an emergency damage repair since the SMA wires need to be heated continuously. So, an innovative method of a RC beam strengthened by CFRP plates in combination with SMA wires was first investigated experimentally in this paper. In addition, the nonlinear finite element software of ABAQUS was employed to further simulate the behavior of RC beams strengthened through the new strengthening method. It can be found that this is an excellent and effective strengthening method.

  3. Application of Hydrophilic Silanol-Based Chemical Grout for Strengthening Damaged Reinforced Concrete Flexural Members

    PubMed Central

    Ju, Hyunjin; Lee, Deuck Hang; Cho, Hae-Chang; Kim, Kang Su; Yoon, Seyoon; Seo, Soo-Yeon

    2014-01-01

    In this study, hydrophilic chemical grout using silanol (HCGS) was adopted to overcome the performance limitations of epoxy materials used for strengthening existing buildings and civil engineering structures. The enhanced material performances of HCGS were introduced, and applied to the section enlargement method, which is one of the typical structural strengthening methods used in practice. To evaluate the excellent structural strengthening performance of the HCGS, structural tests were conducted on reinforced concrete beams, and analyses on the flexural behaviors of test specimens were performed by modified partial interaction theory (PIT). In particular, to improve the constructability of the section enlargement method, an advanced strengthening method was proposed, in which the precast panel was directly attached to the bottom of the damaged structural member by HCGS, and the degree of connection of the test specimens, strengthened by the section enlargement method, were quantitatively evaluated by PIT-based analysis. PMID:28788708

  4. Application of Hydrophilic Silanol-Based Chemical Grout for Strengthening Damaged Reinforced Concrete Flexural Members.

    PubMed

    Ju, Hyunjin; Lee, Deuck Hang; Cho, Hae-Chang; Kim, Kang Su; Yoon, Seyoon; Seo, Soo-Yeon

    2014-06-23

    In this study, hydrophilic chemical grout using silanol (HCGS) was adopted to overcome the performance limitations of epoxy materials used for strengthening existing buildings and civil engineering structures. The enhanced material performances of HCGS were introduced, and applied to the section enlargement method, which is one of the typical structural strengthening methods used in practice. To evaluate the excellent structural strengthening performance of the HCGS, structural tests were conducted on reinforced concrete beams, and analyses on the flexural behaviors of test specimens were performed by modified partial interaction theory (PIT). In particular, to improve the constructability of the section enlargement method, an advanced strengthening method was proposed, in which the precast panel was directly attached to the bottom of the damaged structural member by HCGS, and the degree of connection of the test specimens, strengthened by the section enlargement method, were quantitatively evaluated by PIT-based analysis.

  5. RC beams shear-strengthened with fabric-reinforced-cementitious-matrix (FRCM) composite

    NASA Astrophysics Data System (ADS)

    Loreto, Giovanni; Babaeidarabad, Saman; Leardini, Lorenzo; Nanni, Antonio

    2015-12-01

    The interest in retrofit/rehabilitation of existing concrete structures has increased due to degradation and/or introduction of more stringent design requirements. Among the externally-bonded strengthening systems fiber-reinforced polymers is the most widely known technology. Despite its effectiveness as a material system, the presence of an organic binder has some drawbacks that could be addressed by using in its place a cementitious binder as in fabric-reinforced cementitious matrix (FRCM) systems. The purpose of this paper is to evaluate the behavior of reinforced concrete (RC) beams strengthened in shear with U-wraps made of FRCM. An extensive experimental program was undertaken in order to understand and characterize this composite when used as a strengthening system. The laboratory results demonstrate the technical viability of FRCM for shear strengthening of RC beams. Based on the experimental and analytical results, FRCM increases shear strength but not proportionally to the number of fabric plies installed. On the other hand, FRCM failure modes are related with a high consistency to the amount of external reinforcement applied. Design considerations based on the algorithms proposed by ACI guidelines are also provided.

  6. Oxidation-induced contraction and strengthening of boron fibers

    NASA Technical Reports Server (NTRS)

    Dicarlo, J. A.; Wagner, T. C.

    1981-01-01

    An investigation was conducted to measure and understand the physical and mechanical effects that occur in boron fibers during and after thermal treatment in a controlled oxygen argon gaseous mixture. Of principal concern was the optimization of this treatment as a secondary processing method for significantly improving fiber tensile strength. Strengthening was accomplished by an oxidation induced axial contraction of the fiber and a resulting axial compression of strength limiting flaws within the fiber's tungsten boride core. Various physical observations were used to develop mechanistic models for oxidation, contraction, and flow formation. Processing guidelines are discussed for possibly exceeding the 5.5 GN/sq m strength limit and also for achieving fiber strengthening during application of boron containing diffusion barrier coatings.

  7. Can Inquiry-Based Learning Strengthen the Links between Teaching and Disciplinary Research?

    ERIC Educational Resources Information Center

    Spronken-Smith, Rachel; Walker, Rebecca

    2010-01-01

    Inquiry-based learning has been promoted as a student-centred approach that can strengthen the links between teaching and research. This article examines the potential of inquiry-based learning to strengthen the teaching-research nexus by analysing three case studies: a "structured inquiry" third-year endocrinology medicine module, a…

  8. Sleep On It: How Snoozing Strengthens Memories

    MedlinePlus

    ... part of the U.S. Department of Health and Human Services Search form Search Site Menu Home Latest Issue Past Issues Special Issues Subscribe April 2013 Print this issue Sleep On It How Snoozing Strengthens Memories Send us your comments When you learn something ...

  9. Performance of FRCM strengthened beams subject to fatigue.

    DOT National Transportation Integrated Search

    2017-05-31

    Fabric Reinforced Cementitious Matrix (FRCM) systems have been developed to strengthen or rehabilitate existing concrete and masonry structures subject to damage, steel reinforcement corrosion or requiring resistance capacity improvements due to incr...

  10. 1300 K compressive properties of several dispersion strengthened NiAl materials

    NASA Technical Reports Server (NTRS)

    Whittenberger, J. Daniel; Gaydosh, D. J.; Kumar, K. S.

    1990-01-01

    To examine the potential of rapid solidification technology (RST) as a means to fabricate dispersion-strengthened aluminides, cylindrical compression samples were machined from the gauge section of their tensile specimens and tested in air at 1300 K. While microscopy indicates that RST can produce fine dispersions of TiB2, TiC and HfC in a NiAl matrix, the mechanical property data reveal that only HfC successfully strengthens the intermetallic matrix. The high stress exponents (above 10) and/or independence of strain rate on stress for NiAl-HfC materials suggest elevated temperature mechanical behavior similar to that found in oxide dispersion-strengthened alloys. Furthermore, an apparent example of departure side pinning has been observed, and as such, it is indicative of a threshold stress for creep.

  11. Tetraspanin CD151 regulates alpha6beta1 integrin adhesion strengthening

    NASA Technical Reports Server (NTRS)

    Lammerding, Jan; Kazarov, Alexander R.; Huang, Hayden; Lee, Richard T.; Hemler, Martin E.

    2003-01-01

    The tetraspanin CD151 molecule associates specifically with laminin-binding integrins, including alpha6beta1. To probe strength of alpha6beta1-dependent adhesion to laminin-1, defined forces (0-1.5 nN) were applied to magnetic laminin-coated microbeads bound to NIH 3T3 cells. For NIH 3T3 cells bearing wild-type CD151, adhesion strengthening was observed, as bead detachment became more difficult over time. In contrast, mutant CD151 (with the C-terminal region replaced) showed impaired adhesion strengthening. Static cell adhesion to laminin-1, and detachment of beads coated with fibronectin or anti-alpha6 antibody were all unaffected by CD151 mutation. Hence, CD151 plays a key role in selectively strengthening alpha6beta1 integrin-mediated adhesion to laminin-1.

  12. Microstructures, mechanical behavior and strengthening mechanism of TiSiCN nanocomposite films

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Li, Wei; Liu, Ping; Xue, Zenghui

    Recently, the arguments have existed in the strengthening mechanism and microstructural model of the nanocomposite film due to lack of the convincible experimental evidences. In this investigation, the quarternary TiSiCN nanocomposite films with the different C and Si contents are synthesized by the reactive-magnetron-sputtering technique. The TiSiCN film is characterized as the nanocomposite structure with the TiN nanocrystallites surrounded by the (Si 3N 4 + C + CN x) interface phase. When the C/Si content ratio is 2:2, the TiSiCN nanocomposite film is remarkably strengthened with the maximal hardness and elastic modulus of 46.1 GPa and 425 GPa, respectively. Meanwhile,more » the (Si 3N 4 + C + CN x) interfaces exhibit as a crystallized form, which can coordinate the growth misorientations and maintain the coherently epitaxial growth between the TiN nanocrystallites and interfaces. Through the high-resolution transmission electron microscopy (HRTEM) observations, this investigation firstly provides the direct experimental evidence for the crystallized feature of the interfaces when the TiSiCN nanocomposite film is strengthened, suggesting that the strengthening effect of the TiSiCN nanocomposite film can be attributed to the coherent-interface strengthening mechanism, which is expressed as the “nc-TiN/c-Si 3N 4/c-C/c-CN x” model.« less

  13. Microstructures, mechanical behavior and strengthening mechanism of TiSiCN nanocomposite films

    DOE PAGES

    Li, Wei; Liu, Ping; Xue, Zenghui; ...

    2017-05-18

    Recently, the arguments have existed in the strengthening mechanism and microstructural model of the nanocomposite film due to lack of the convincible experimental evidences. In this investigation, the quarternary TiSiCN nanocomposite films with the different C and Si contents are synthesized by the reactive-magnetron-sputtering technique. The TiSiCN film is characterized as the nanocomposite structure with the TiN nanocrystallites surrounded by the (Si 3N 4 + C + CN x) interface phase. When the C/Si content ratio is 2:2, the TiSiCN nanocomposite film is remarkably strengthened with the maximal hardness and elastic modulus of 46.1 GPa and 425 GPa, respectively. Meanwhile,more » the (Si 3N 4 + C + CN x) interfaces exhibit as a crystallized form, which can coordinate the growth misorientations and maintain the coherently epitaxial growth between the TiN nanocrystallites and interfaces. Through the high-resolution transmission electron microscopy (HRTEM) observations, this investigation firstly provides the direct experimental evidence for the crystallized feature of the interfaces when the TiSiCN nanocomposite film is strengthened, suggesting that the strengthening effect of the TiSiCN nanocomposite film can be attributed to the coherent-interface strengthening mechanism, which is expressed as the “nc-TiN/c-Si 3N 4/c-C/c-CN x” model.« less

  14. Effectiveness of hip muscle strengthening in patellofemoral pain syndrome patients: a systematic review.

    PubMed

    Santos, Thiago R T; Oliveira, Bárbara A; Ocarino, Juliana M; Holt, Kenneth G; Fonseca, Sérgio T

    2015-01-01

    Patellofemoral pain syndrome (PFPS) is characterized by anterior knee pain, which may limit the performance of functional activities. The influence of hip joint motion on the development of this syndrome has already been documented in the literature. In this regard, studies have investigated the effectiveness of hip muscle strengthening in patients with PFPS. The aims of this systematic review were (1) to summarize the literature related to the effects of hip muscle strengthening on pain intensity, muscle strength, and function in individuals with PFPS and (2) to evaluate the methodological quality of the selected studies. A search for randomized controlled clinical trials was conducted using the following databases: Google Scholar, MEDLINE, PEDro, LILACS, and SciELO. The selected studies had to distinguish the effects of hip muscle strengthening in a group of patients with PFPS, as compared to non-intervention or other kinds of intervention, and had to investigate the following outcomes: pain, muscle strength, and function. The methodological quality of the selected studies was analyzed by means of the PEDro scale. Seven studies were selected. These studies demonstrated that hip muscle strengthening was effective in reducing pain. However, the studies disagreed regarding the treatments' ability to improve muscle strength. Improvement in functional capabilities after hip muscle strengthening was found in five studies. Hip muscle strengthening is effective in reducing the intensity of pain and improving functional capabilities in patients with PFPS, despite the lack of evidence for its ability to increase muscle strength.

  15. Strengthening Mechanisms in Nanostructured Al/SiCp Composite Manufactured by Accumulative Press Bonding

    NASA Astrophysics Data System (ADS)

    Amirkhanlou, Sajjad; Rahimian, Mehdi; Ketabchi, Mostafa; Parvin, Nader; Yaghinali, Parisa; Carreño, Fernando

    2016-10-01

    The strengthening mechanisms in nanostructured Al/SiCp composite deformed to high strain by a novel severe plastic deformation process, accumulative press bonding (APB), were investigated. The composite exhibited yield strength of 148 MPa which was 5 and 1.5 times higher than that of raw aluminum (29 MPa) and aluminum-APB (95 MPa) alloys, respectively. A remarkable increase was also observed in the ultimate tensile strength of Al/SiCp-APB composite, 222 MPa, which was 2.5 and 1.2 times greater than the obtained values for raw aluminum (88 MPa) and aluminum-APB (180 MPa) alloys, respectively. Analytical models well described the contribution of various strengthening mechanisms. The contributions of grain boundary, strain hardening, thermal mismatch, Orowan, elastic mismatch, and load-bearing strengthening mechanisms to the overall strength of the Al/SiCp microcomposite were 64.9, 49, 6.8, 2.4, 5.4, and 1.5 MPa, respectively. Whereas Orowan strengthening mechanism was considered as the most dominating strengthening mechanism in Al/SiCp nanocomposites, it was negligible for strengthening the microcomposite. Al/SiCp nanocomposite showed good agreement with quadratic summation model; however, experimental results exhibited good accordance with arithmetic and compounding summation models in the microcomposite. While average grain size of the composite reached 380 nm, it was less than 100 nm in the vicinity of SiC particles as a result of particle-stimulated nucleation mechanism.

  16. Molecular dynamics study of strengthening mechanism of nanolaminated graphene/Cu composites under compression.

    PubMed

    Weng, Shayuan; Ning, Huiming; Fu, Tao; Hu, Ning; Zhao, Yinbo; Huang, Cheng; Peng, Xianghe

    2018-02-15

    Molecular dynamics simulations of nanolaminated graphene/Cu (NGCu) and pure Cu under compression are conducted to investigate the underlying strengthening mechanism of graphene and the effect of lamella thickness. It is found that the stress-strain curves of NGCu undergo 3 regimes i.e. the elastic regime I, plastic strengthening regime II and plastic flow regime III. Incorporating graphene monolayer is proved to simultaneously contribute to the strength and ductility of the composites and the lamella thickness has a great effect on the mechanical properties of NGCu composites. Different strengthening mechanisms play main role in different regimes, the transition of mechanisms is found to be related to the deformation behavior. Graphene affected zone is developed and integrated with rule of mixtures and confined layer slip model to describe the elastic properties of NGCu and the strengthening effect of the incorporated graphene.

  17. Strengthening EPA Citizen Science Partnerships for Environmental Protection

    EPA Pesticide Factsheets

    The Council’s April 2018 report, Information to Action—Strengthening EPA Citizen Science Partnerships for Environmental Protection, and the recommendations contained within were developed following extensive interviews with citizen science experts and prac

  18. Strengthening of Aluminum Alloy 2219 by Thermo-mechanical Treatment

    NASA Astrophysics Data System (ADS)

    Li, Xifeng; Lei, Kun; Song, Peng; Liu, Xinqin; Zhang, Fei; Li, Jianfei; Chen, Jun

    2015-10-01

    Strengthening of aluminum alloy 2219 by thermo-mechanical treatment has been compared with artificial aging. Three simple deformation modes including pre-stretching, compression, and rolling have been used in thermo-mechanical treatment. The tensile strength, elongation, fracture feature, and precipitated phase have been investigated. The results show that the strengthening effect of thermo-mechanical treatment is better than the one of artificial aging. Especially, the yield strength significantly increases with a small decrease of elongation. When the specimen is pre-stretched to 8.0%, the yield strength reaches 385.0 MPa and increases by 22.2% in comparison to the one obtained in aging condition. The maximum tensile strength of 472.4 MPa is achieved with 4.0% thickness reduction by compression. The fracture morphology reveals locally ductile and brittle failure mechanism, while the coarse second-phase particles distribute on the fracture surface. The intermediate phases θ″ or θ' orthogonally precipitate in the matrix after thermo-mechanical treatment. As compared to artificial aging, the cold plastic deformation increases distribution homogeneity and the volume fraction of θ'' or θ' precipitates. These result in a better strengthening effect.

  19. Glass strengthening and patterning methods

    DOEpatents

    Harper, David C; Wereszczak, Andrew A; Duty, Chad E

    2015-01-27

    High intensity plasma-arc heat sources, such as a plasma-arc lamp, are used to irradiate glass, glass ceramics and/or ceramic materials to strengthen the glass. The same high intensity plasma-arc heat source may also be used to form a permanent pattern on the glass surface--the pattern being raised above the glass surface and integral with the glass (formed of the same material) by use of, for example, a screen-printed ink composition having been irradiated by the heat source.

  20. Deformation Analysis of RC Ties Externally Strengthened with FRP Sheets

    NASA Astrophysics Data System (ADS)

    Gribniak, V.; Arnautov, A. K.; Kaklauskas, G.; Jakstaite, R.; Tamulenas, V.; Gudonis, E.

    2014-11-01

    The current study has two objectives: to validate the ability of the Atena finite-element software to estimate the deformations of reinforced concrete (RC) elements strengthened with fiber-reinforced polymer (FRP) sheets and to assess the effect of FRP-to-concrete bond strength on the results of numerical simulation. It is shown that the bond strength has to be selected according to the overall stiffness of the composite element. The numerical results found are corroborated experimentally by tensile tests of RC elements strengthened with basalt FRP sheets.

  1. [Strengthening the medical aspect of addiction care].

    PubMed

    van Brussel, G H

    2003-08-23

    The Dutch Association for Addiction Medicine and the umbrella organisation GGZ Nederland (sector organisation for mental health and addiction care) have compiled a report entitled 'Strengthening medical care in the addiction care sector'. The report argues why medical care needs to be strengthened and provides guidance as to how the present shortcomings in quality and quantity can be dealt with. Addiction is now considered to be a medical condition with patients instead of clients. This means that the care, including the financial aspects, needs to be organised in the same way as all other forms of regular health care. Furthermore, the training in addiction medicine needs to be given a clearer status in the form of departments, professorships, training institutes and certification. Within the context of this report the responsibility of addiction centres needs to be emphasised. Vacancies in the many forms of social work could be exchanged for well-trained nurses and physicians, without the need for extra financial assistance.

  2. Thermogravity system designed for use in dispersion strengthening studies

    NASA Technical Reports Server (NTRS)

    Herbell, T. P.

    1972-01-01

    A thermogravimetry system designed to study the reduction of oxides in metal and alloy powders to be used in dispersion strengthened materials is described. The apparatus was devised for use at high temperatures with controlled atmospheres. Experimental weight change and moisture evolution results for the thermal decomposition of calcium oxalate monohydrate in dry helium, and experimental weight change results for the reduction of nickel oxide in dry hydrogen and hydrogen containing 15,000 PPM water vapor are presented. The system is currently being successfully applied to the evaluation of the reduction characteristics and the removal of impurities from metals and alloys to be used for dispersion strengthening.

  3. Thermogravimetry system designed for use in dispersion strengthening studies.

    NASA Technical Reports Server (NTRS)

    Herbell, T. P.

    1972-01-01

    A thermogravimetry system, designed to study the reduction of oxides in metal and alloy powders to be used in dispersion strengthened materials, is described. The apparatus was devised for use at high temperatures with controlled atmospheres. Experimental weight change and moisture evolution results for the thermal decomposition of calcium oxalate monohydrate in dry helium, and experimental weight change results for the reduction of nickel oxide in dry hydrogen and hydrogen containing 15,000 p.p.m. water vapor are presented. The system is currently being successfully applied to the evaluation of the reduction characteristics and the removal of impurities from metals and alloys to be used for dispersion strengthening.

  4. Strengthening 4-H Program Communication through Technology

    ERIC Educational Resources Information Center

    Robideau, Kari; Santl, Karyn

    2011-01-01

    Advances in technology are transforming how youth and parents interact with programs. The Strengthening 4-H Communication through Technology project was implemented in eight county 4-H programs in Northwest Minnesota. This article outlines the intentional process used to effectively implement technology in program planning. The project includes:…

  5. Strengthening Psychology’s Workforce for Older Adults

    PubMed Central

    Hoge, Michael A.; Karel, Michele J.; Zeiss, Antonette M.; Alegria, Margarita; Moye, Jennifer

    2016-01-01

    Professional psychology faces an urgent crisis, which the following facts paint in stark relief. Adults over age 65 will rise to 20% of the U.S. population over the next 15 years and already account for a third of the country’s health care expenditures. Up to 8 million older adults experience mental health and substance use conditions in a given year, yet most psychologists receive no training in their assessment and treatment. No more than an estimated 4%, or 3,000, psychologists nationwide specialize in geropsychology; a ratio approaching 3,000 to 1. A small group of advocates within the profession have sounded the alarm and worked to strengthen geropsychology as a specialty, but this has had very limited impact on the actual supply of psychologists qualified to provide services to this population. In 2012, an Institute of Medicine (IOM) committee released a report on the crisis regarding the mental health and substance use workforce for older adults. Drawing on that report, a team composed of geropsychologists, along with psychologists who served on the IOM committee, identifies in this article priority areas for workforce development. The authors assess the progress of psychology in each of these areas and offer a set of recommendations for future efforts by this profession to develop its own workforce and to strengthen the ability of other caregivers to address the behavioral health needs of older adults. Strengthening its own workforce and responding to the needs of this population is imperative if psychology is to maintain its relevance as a health profession and meet its ethical obligations to an increasingly diverse society. PMID:25844650

  6. 77 FR 51465 - Federal Housing Administration: Strengthening Risk Management Through Responsible FHA-Approved...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-24

    .... FR-5622-F-01] RIN 2502-AJ13 Federal Housing Administration: Strengthening Risk Management Through... strengthen the risk management practices of the Federal Housing Administration (FHA), HUD published a final... enforce its risk management regulations. DATES: Effective Date: September 24, 2012. FOR FURTHER...

  7. Comparative Numerical Analysis of Different Strengthening Systems of Historical Brick Arches

    NASA Astrophysics Data System (ADS)

    Zielińska, M.

    2017-05-01

    The article presents a comparative numerical analysis of various ways to strengthen historical brick arches. Five ways of strengthening brick arches with steel tie-rods have been proposed. Two of these involve the use of braces wrapped around pillars supporting the arch connected with a tie-rod; the other two ways involve the use of the tie-rods with welded metal sheets of different sizes; the latter involves the use of a tie-rod glued with the use of an epoxy adhesive. The collected data were compared with the reference model of the arch left without any interference. The results make it possible to evaluate the effectiveness of the methods by comparing displacements in the vertical and horizontal direction and stresses. The article indicates the direction of proper planning and design of the arch strengthening in brick structures in historical buildings.

  8. Moment redistribution in continuous reinforced concrete beams strengthened with carbon-fiber-reinforced polymer laminates

    NASA Astrophysics Data System (ADS)

    Aiello, M. A.; Valente, L.; Rizzo, A.

    2007-09-01

    The results of tests on continuous steel-fiber-reinforced concrete (RC) beams, with and without an external strengthening, are presented. The internal flexural steel reinforcement was designed so that to allow steel yielding before the collapse of the beams. To prevent the shear failure, steel stirrups were used. The tests also included two nonstrengthened control beams; the other specimens were strengthened with different configurations of externally bonded carbon-fiber-reinforced polymer (CFRP) laminates. In order to prevent the premature failure from delamination of the CFRP strengthening, a wrapping was also applied. The experimental results obtained show that it is possible to achieve a sufficient degree of moment redistribution if the strengthening configuration is chosen properly, confirming the results provided by two simple numerical models.

  9. A systems-based partnership learning model for strengthening primary healthcare

    PubMed Central

    2013-01-01

    Background Strengthening primary healthcare systems is vital to improving health outcomes and reducing inequity. However, there are few tools and models available in published literature showing how primary care system strengthening can be achieved on a large scale. Challenges to strengthening primary healthcare (PHC) systems include the dispersion, diversity and relative independence of primary care providers; the scope and complexity of PHC; limited infrastructure available to support population health approaches; and the generally poor and fragmented state of PHC information systems. Drawing on concepts of comprehensive PHC, integrated quality improvement (IQI) methods, system-based research networks, and system-based participatory action research, we describe a learning model for strengthening PHC that addresses these challenges. We describe the evolution of this model within the Australian Aboriginal and Torres Strait Islander primary healthcare context, successes and challenges in its application, and key issues for further research. Discussion IQI approaches combined with system-based participatory action research and system-based research networks offer potential to support program implementation and ongoing learning across a wide scope of primary healthcare practice and on a large scale. The Partnership Learning Model (PLM) can be seen as an integrated model for large-scale knowledge translation across the scope of priority aspects of PHC. With appropriate engagement of relevant stakeholders, the model may be applicable to a wide range of settings. In IQI, and in the PLM specifically, there is a clear role for research in contributing to refining and evaluating existing tools and processes, and in developing and trialling innovations. Achieving an appropriate balance between funding IQI activity as part of routine service delivery and funding IQI related research will be vital to developing and sustaining this type of PLM. Summary This paper draws together

  10. Effectiveness of hip muscle strengthening in patellofemoral pain syndrome patients: a systematic review

    PubMed Central

    Santos, Thiago R. T.; Oliveira, Bárbara A.; Ocarino, Juliana M.; Holt, Kenneth G.; Fonseca, Sérgio T.

    2015-01-01

    Introduction: Patellofemoral pain syndrome (PFPS) is characterized by anterior knee pain, which may limit the performance of functional activities. The influence of hip joint motion on the development of this syndrome has already been documented in the literature. In this regard, studies have investigated the effectiveness of hip muscle strengthening in patients with PFPS. Objectives: The aims of this systematic review were (1) to summarize the literature related to the effects of hip muscle strengthening on pain intensity, muscle strength, and function in individuals with PFPS and (2) to evaluate the methodological quality of the selected studies. Method: A search for randomized controlled clinical trials was conducted using the following databases: Google Scholar, MEDLINE, PEDro, LILACS, and SciELO. The selected studies had to distinguish the effects of hip muscle strengthening in a group of patients with PFPS, as compared to non-intervention or other kinds of intervention, and had to investigate the following outcomes: pain, muscle strength, and function. The methodological quality of the selected studies was analyzed by means of the PEDro scale. Results: Seven studies were selected. These studies demonstrated that hip muscle strengthening was effective in reducing pain. However, the studies disagreed regarding the treatments' ability to improve muscle strength. Improvement in functional capabilities after hip muscle strengthening was found in five studies. Conclusion: Hip muscle strengthening is effective in reducing the intensity of pain and improving functional capabilities in patients with PFPS, despite the lack of evidence for its ability to increase muscle strength. PMID:26039034

  11. Meta-analysis of the effect of strengthening interventions in individuals with cerebral palsy.

    PubMed

    Park, Eun-Young; Kim, Won-Ho

    2014-02-01

    This study aimed to investigate the evidence that strengthening interventions can improve muscle strength and activity in individuals with cerebral palsy. The search focused on studies that employed strength training for children with cerebral palsy for which six electronic databases were used to extract literature published from 2001 to 2012. The key terms used in these searches were combined strength training, strengthening, weight training, weight lifting, resistance, and cerebral palsy. The quality of each study was assessed using the PEDro (Physiotherapy Evidence Database) scale. Thirteen randomized controlled trial studies were selected and divided into categories according to program type, mode, and outcome measures. The overall effect sizes of each study and types of strengthening were large. Strengthening exercise improved muscle strength to a greater degree, when practiced 3 times per week in 40-50 min sessions than in other categories of session length, and greater improvement was observed in younger children than in older. The effect size of the activities and variables related to gait, except for gait endurance, were medium to large. The effect size of individual muscles was large, but the effect sizes for ankle plantar flexor, hip abductor/adductor, and extensor were insignificant. Strengthening interventions are useful for increasing muscle strength in individuals with cerebral palsy, specifically in youth and children, and optimal exercise consisted of 40- to 50-min sessions performed 3 times per week. Although strengthening interventions may improve activities, including gait, more studies that are rigorous are needed to determine the contributions to gross motor function. Copyright © 2013 Elsevier Ltd. All rights reserved.

  12. Working Together for Children: Strengthening Transition Pathways

    ERIC Educational Resources Information Center

    Collie, Louise; Willis, Felicity; Paine, Crystal; Windsor, Corina

    2007-01-01

    The "Working Together for Children: Strengthening Transition Pathways" Team has identified that there is a gap between the Early Childhood settings and schools within the Dubbo area. Through meetings with early childhood professionals within Dubbo the authors have identified that the current landscape of care and education within their community…

  13. 34 CFR 609.1 - What is the Strengthening Historically Black Graduate Institutions Program?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 3 2010-07-01 2010-07-01 false What is the Strengthening Historically Black Graduate Institutions Program? 609.1 Section 609.1 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION STRENGTHENING HISTORICALLY BLACK...

  14. A TEM quantitative evaluation of strengthening in an Mg-RE alloy reinforced with SiC

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cabibbo, Marcello, E-mail: m.cabibbo@univpm.it; Spigarelli, Stefano

    2011-10-15

    Magnesium alloys containing rare earth elements are known to have high specific strength, good creep and corrosion resistance up to 523 K. The addition of SiC ceramic particles strengthens the metal matrix composite resulting in better wear and creep resistance while maintaining good machinability. The role of the reinforcement particles in enhancing strength can be quantitatively evaluated using transmission electron microscopy (TEM). This paper presents a quantitative evaluation of the different strengthening contributions, determined through TEM inspections, in an SiC Mg-RE composite alloy containing yttrium, neodymium, gadolinium and dysprosium. Compression tests at temperatures ranging between 290 and 573 K weremore » carried out. The microstructure strengthening mechanism was studied for all the compression conditions. Strengthening was compared to the mechanical results and the way the different contributions were combined is also discussed and justified. - Research Highlights: {yields} TEM yield strengthening terms evaluation on a Mg-RE SiC alloy. {yields} The evaluation has been extended to different compression temperature conditions. {yields} Linear and Quadratic sum has been proposed and validated. {yields} Hall-Petch was found to be the most prominent strengthening contributions.« less

  15. Strengthening capacity to apply health research evidence in policy making: experience from four countries

    PubMed Central

    Hawkes, Sarah; K Aulakh, Bhupinder; Jadeja, Nidhee; Jimenez, Michelle; Buse, Kent; Anwar, Iqbal; Barge, Sandhya; Odubanjo, M Oladoyin; Shukla, Abhay; Ghaffar, Abdul; Whitworth, Jimmy

    2016-01-01

    Increasing the use of evidence in policy making means strengthening capacity on both the supply and demand sides of evidence production. However, little experience of strengthening the capacity of policy makers in low- and middle- income countries has been published to date. We describe the experiences of five projects (in Bangladesh, Gambia, India and Nigeria), where collaborative teams of researchers and policy makers/policy influencers worked to strengthen policy maker capacity to increase the use of evidence in policy. Activities were focused on three (interlinked) levels of capacity building: individual, organizational and, occasionally, institutional. Interventions included increasing access to research/data, promoting frequent interactions between researchers and members of the policy communities, and increasing the receptivity towards research/data in policy making or policy-implementing organizations. Teams were successful in building the capacity of individuals to access, understand and use evidence/data. Strengthening organizational capacity generally involved support to infrastructure (e.g. through information technology resources) and was also deemed to be successful. There was less appetite to address the need to strengthen institutional capacity—although this was acknowledged to be fundamental to promoting sustainable use of evidence, it was also recognized as requiring resources, legitimacy and regulatory support from policy makers. Evaluation across the three spheres of capacity building was made more challenging by the lack of agreed upon evaluation frameworks. In this article, we propose a new framework for assessing the impact of capacity strengthening activities to promote the use of evidence/data in policy making. Our evaluation concluded that strengthening the capacity of individuals and organizations is an important but likely insufficient step in ensuring the use of evidence/data in policy-cycles. Sustainability of evidence

  16. Strengthening capacity to apply health research evidence in policy making: experience from four countries.

    PubMed

    Hawkes, Sarah; K Aulakh, Bhupinder; Jadeja, Nidhee; Jimenez, Michelle; Buse, Kent; Anwar, Iqbal; Barge, Sandhya; Odubanjo, M Oladoyin; Shukla, Abhay; Ghaffar, Abdul; Whitworth, Jimmy

    2016-03-01

    Increasing the use of evidence in policy making means strengthening capacity on both the supply and demand sides of evidence production. However, little experience of strengthening the capacity of policy makers in low- and middle- income countries has been published to date. We describe the experiences of five projects (in Bangladesh, Gambia, India and Nigeria), where collaborative teams of researchers and policy makers/policy influencers worked to strengthen policy maker capacity to increase the use of evidence in policy. Activities were focused on three (interlinked) levels of capacity building: individual, organizational and, occasionally, institutional. Interventions included increasing access to research/data, promoting frequent interactions between researchers and members of the policy communities, and increasing the receptivity towards research/data in policy making or policy-implementing organizations. Teams were successful in building the capacity of individuals to access, understand and use evidence/data. Strengthening organizational capacity generally involved support to infrastructure (e.g. through information technology resources) and was also deemed to be successful. There was less appetite to address the need to strengthen institutional capacity-although this was acknowledged to be fundamental to promoting sustainable use of evidence, it was also recognized as requiring resources, legitimacy and regulatory support from policy makers. Evaluation across the three spheres of capacity building was made more challenging by the lack of agreed upon evaluation frameworks. In this article, we propose a new framework for assessing the impact of capacity strengthening activities to promote the use of evidence/data in policy making. Our evaluation concluded that strengthening the capacity of individuals and organizations is an important but likely insufficient step in ensuring the use of evidence/data in policy-cycles. Sustainability of evidence-informed policy

  17. Process for strengthening silicon based ceramics

    DOEpatents

    Kim, Hyoun-Ee; Moorhead, A. J.

    1993-01-01

    A process for strengthening silicon based ceramic monolithic materials and omposite materials that contain silicon based ceramic reinforcing phases that requires that the ceramic be exposed to a wet hydrogen atmosphere at about 1400.degree. C. The process results in a dense, tightly adherent silicon containing oxide layer that heals, blunts , or otherwise negates the detrimental effect of strength limiting flaws on the surface of the ceramic body.

  18. Process for strengthening silicon based ceramics

    DOEpatents

    Kim, Hyoun-Ee; Moorhead, A. J.

    1993-04-06

    A process for strengthening silicon based ceramic monolithic materials and omposite materials that contain silicon based ceramic reinforcing phases that requires that the ceramic be exposed to a wet hydrogen atmosphere at about 1400.degree. C. The process results in a dense, tightly adherent silicon containing oxide layer that heals, blunts , or otherwise negates the detrimental effect of strength limiting flaws on the surface of the ceramic body.

  19. Mutual research capacity strengthening: a qualitative study of two-way partnerships in public health research

    PubMed Central

    2012-01-01

    Introduction Capacity building has been employed in international health and development sectors to describe the process of ‘experts’ from more resourced countries training people in less resourced countries. Hence the concept has an implicit power imbalance based on ‘expert’ knowledge. In 2011, a health research strengthening workshop was undertaken at Atoifi Adventist Hospital, Solomon Islands to further strengthen research skills of the Hospital and College of Nursing staff and East Kwaio community leaders through partnering in practical research projects. The workshop was based on participatory research frameworks underpinned by decolonising methodologies, which sought to challenge historical power imbalances and inequities. Our research question was, “Is research capacity strengthening a two-way process?” Methods In this qualitative study, five Solomon Islanders and five Australians each responded to four open-ended questions about their experience of the research capacity strengthening workshop and activities: five chose face to face interview, five chose to provide written responses. Written responses and interview transcripts were inductively analysed in NVivo 9. Results Six major themes emerged. These were: Respectful relationships; Increased knowledge and experience with research process; Participation at all stages in the research process; Contribution to public health action; Support and sustain research opportunities; and Managing challenges of capacity strengthening. All researchers identified benefits for themselves, their institution and/or community, regardless of their role or country of origin, indicating that the capacity strengthening had been a two-way process. Conclusions The flexible and responsive process we used to strengthen research capacity was identified as mutually beneficial. Using community-based participatory frameworks underpinned by decolonising methodologies is assisting to redress historical power imbalances and

  20. Mutual research capacity strengthening: a qualitative study of two-way partnerships in public health research.

    PubMed

    Redman-MacLaren, Michelle; MacLaren, David J; Harrington, Humpress; Asugeni, Rowena; Timothy-Harrington, Relmah; Kekeubata, Esau; Speare, Richard

    2012-12-18

    Capacity building has been employed in international health and development sectors to describe the process of 'experts' from more resourced countries training people in less resourced countries. Hence the concept has an implicit power imbalance based on 'expert' knowledge. In 2011, a health research strengthening workshop was undertaken at Atoifi Adventist Hospital, Solomon Islands to further strengthen research skills of the Hospital and College of Nursing staff and East Kwaio community leaders through partnering in practical research projects. The workshop was based on participatory research frameworks underpinned by decolonising methodologies, which sought to challenge historical power imbalances and inequities. Our research question was, "Is research capacity strengthening a two-way process?" In this qualitative study, five Solomon Islanders and five Australians each responded to four open-ended questions about their experience of the research capacity strengthening workshop and activities: five chose face to face interview, five chose to provide written responses. Written responses and interview transcripts were inductively analysed in NVivo 9. Six major themes emerged. These were: Respectful relationships; Increased knowledge and experience with research process; Participation at all stages in the research process; Contribution to public health action; Support and sustain research opportunities; and Managing challenges of capacity strengthening. All researchers identified benefits for themselves, their institution and/or community, regardless of their role or country of origin, indicating that the capacity strengthening had been a two-way process. The flexible and responsive process we used to strengthen research capacity was identified as mutually beneficial. Using community-based participatory frameworks underpinned by decolonising methodologies is assisting to redress historical power imbalances and inequities and is helping to sustain the initial steps

  1. Effect of Superimposed Electromyostimulation on Back Extensor Strengthening: A Pilot Study.

    PubMed

    Park, Jae Hyeon; Seo, Kwan Sik; Lee, Shi-Uk

    2016-09-01

    Park, JH, Seo, KS, and Lee, S-U. Effect of superimposed electromyostimulation on back extensor strengthening: a pilot study. J Strength Cond Res 30(9): 2470-2475, 2016-Electromyostimulation (EMS) superimposed on voluntary contraction (VC) can increase muscle strength. However, no study has examined the effect of superimposing EMS on back extensor strengthening. The purpose of this study was to determine the effect of superimposed EMS on back extensor strengthening in healthy adults. Twenty healthy men, 20-29 years of age, without low-back pain were recruited. In the EMS group, electrodes were attached to bilateral L2 and L4 paraspinal muscles. Stimulation intensity was set for maximally tolerable intensity. With VC, EMS was superimposed for 10 seconds followed by a 20-second rest period. The same protocol was used in the sham stimulation (SS) group, except that the stimulation intensity was set at the lowest intensity (5 mA). All subjects performed back extension exercise using a Swiss ball, with 10 repetitions per set, 2 sets each day, 5 times a week for 2 weeks. The primary outcome measure was the change in isokinetic strength of the back extensor using an isokinetic dynamometer. Additionally, endurance was measured using the Sorensen test. After 2 weeks of back extension exercise, the peak torque and endurance increased significantly in both groups (p ≤ 0.05). Effect size between the EMS group and the SS group was medium in strength and endurance. However, there was no statistically significant difference between 2 groups. In conclusion, 2 weeks of back extensor strengthening exercise was effective for strength and endurance. Superimposing EMS on back extensor strengthening exercise could provide an additional effect on increasing strength.

  2. Effect of shoulder girdle strengthening on trunk alignment in patients with stroke.

    PubMed

    Awad, Amina; Shaker, Hussien; Shendy, Wael; Fahmy, Manal

    2015-07-01

    [Purpose] This study investigated the effect of shoulder girdle strengthening, particularly the scapular muscles, on poststroke trunk alignment. [Subjects and Methods] The study involved 30 patients with residual hemiparesis following cerebrovascular stroke. Patient assessment included measuring shoulder muscle peak torque, scapular muscles peak force, spinal lateral deviation angle, and motor functional performance. Patients were randomly allocated either to the control group or the study group and received an 18-session strengthening program including active resisted exercises for shoulder abductors and external rotators in addition to trunk control exercises. The study group received additional strengthening exercises for the scapular muscles. [Results] The two groups showed significant improvement in strength of all shoulder and scapular muscles, with higher improvement in the study group. Similarly, the lateral spinal deviation angles significantly improved in both groups, with significantly higher improvement in the study group. Transfer activity, sitting balance, upper limb functions, and hand movements significantly improved in the two groups, with higher improvement in the latter two functions in the study group. [Conclusion] Strengthening of shoulder girdle muscles, particularly scapular muscles, can significantly contribute to improving the postural alignment of the trunk in patients with poststroke hemiparesis.

  3. Impact resonance method for damage detection in RC beams strengthened with composites

    NASA Astrophysics Data System (ADS)

    Gheorghiu, Catalin; Rhazi, Jamal E.; Labossiere, Pierre

    2005-05-01

    There are numerous successful applications of fibre-reinforced composites for strengthening the civil engineering infrastructure. Most of these repairs are being continuously or intermittently monitored for assessing their effectiveness and safety. The impact resonance method (IRM), a non-destructive technique, utilized in civil engineering exclusively for determining the dynamic concrete properties, could be a valuable and viable damage detection tool for structural elements. The IRM gives useful information about the dynamic characteristics of rectangular and circular concrete members such as beams and columns. In this experimental program, a 1.2-m-long reinforced concrete beam strengthened with a carbon fibre-reinforced polymer (CFRP) plate has been employed. The CFRP-strengthened beam has been loaded in fatigue for two million cycles at 3 Hz. The load amplitude was from 15 to 35% of the anticipated yielding load of the beam. Throughout fatigue testing the cycling was stopped for IRM measurements to be taken. The obtained data provided information about changes in modal properties such as natural frequencies of vibration. These results have shown the successful use of the IRM for detecting fatigue damage in concrete members strengthened with composites.

  4. Bond Behavior of Historical Clay Bricks Strengthened with Steel Reinforced Polymers (SRP).

    PubMed

    Grande, Ernesto; Imbimbo, Maura; Sacco, Elio

    2011-03-21

    In the strengthening interventions of past and historical masonry constructions, the non-standardized manufacture processes, the ageing and the damage of masonry units, could significantly affect the properties of the surfaces where strengthening materials are applied. This aspect requires particular care in evaluating the performance of externally bonded strengthening layers, especially with reference to the detachment mechanism. The bond response of old masonries could be very different from that occurring in new masonry units which are the ones generally considered in most of the bond tests available in technical literature. The aim of the present paper is the study of the bond behavior of historical clay bricks strengthened with steel reinforced polymers (SRP) materials. In particular, the results of an experimental study concerning new manufactured clay bricks and old bricks extracted from different historical masonry buildings are presented. The obtained results, particularly in terms of bond resistance, detachment mechanism and strain distributions, are discussed for the purpose of analyzing the peculiarities of the historical bricks in comparison with new manufactured ones. Some considerations on the efficacy of the theoretical formulations of the recent Italian code are also carried out.

  5. Bond Behavior of Historical Clay Bricks Strengthened with Steel Reinforced Polymers (SRP)

    PubMed Central

    Grande, Ernesto; Imbimbo, Maura; Sacco, Elio

    2011-01-01

    In the strengthening interventions of past and historical masonry constructions, the non-standardized manufacture processes, the ageing and the damage of masonry units, could significantly affect the properties of the surfaces where strengthening materials are applied. This aspect requires particular care in evaluating the performance of externally bonded strengthening layers, especially with reference to the detachment mechanism. The bond response of old masonries could be very different from that occurring in new masonry units which are the ones generally considered in most of the bond tests available in technical literature. The aim of the present paper is the study of the bond behavior of historical clay bricks strengthened with steel reinforced polymers (SRP) materials. In particular, the results of an experimental study concerning new manufactured clay bricks and old bricks extracted from different historical masonry buildings are presented. The obtained results, particularly in terms of bond resistance, detachment mechanism and strain distributions, are discussed for the purpose of analyzing the peculiarities of the historical bricks in comparison with new manufactured ones. Some considerations on the efficacy of the theoretical formulations of the recent Italian code are also carried out. PMID:28880008

  6. Self-monitoring fiber reinforced polymer strengthening system for civil engineering infrastructures

    NASA Astrophysics Data System (ADS)

    Jiang, Guoliang; Dawood, Mina; Peters, Kara; Rizkalla, Sami

    2008-03-01

    Fiber reinforced polymer (FRP) materials are currently used for strengthening civil engineering infrastructures. The strengthening system is dependant on the bond characteristics of the FRP to the external surface of the structure to be effective in resisting the applied loads. This paper presents an innovative self-monitoring FRP strengthening system. The system consists of two components which can be embedded in FRP materials to monitor the global and local behavior of the strengthened structure respectively. The first component of the system is designed to evaluate the applied load acting on a structure based on elongation of the FRP layer along the entire span of the structure. Success of the global system has been demonstrated using a full-scale prestressed concrete bridge girder which was loaded up to failure. The test results indicate that this type of sensor can be used to accurately determine the load prior to failure within 15 percent of the measured value. The second sensor component consists of fiber Bragg grating sensors. The sensors were used to monitor the behavior of steel double-lap shear splices tested under tensile loading up to failure. The measurements were used to identify abnormal structural behavior such as epoxy cracking and FRP debonding. Test results were also compared to numerical values obtained from a three dimensional shear-lag model which was developed to predict the sensor response.

  7. Carboxymethylated glucomannan as paper strengthening agent.

    PubMed

    Wang, Meng; He, Weitao; Wang, Shun; Song, Xianliang

    2015-07-10

    Strength additives play an important role in allowing the papermaking industry to achieve its objectives. In this study, a new kind of paper strengthening agent based on glucomannan was developed by treating it with sodium chloroacetate under alkaline conditions, and the effects on paper properties were evaluated. Results indicated that carboxymethylated glucomannan could significantly improve the paper properties. Compared to the untreated paper, the density, burst index, tensile index, and folding endurance were increased by 15.2%, 22.8%, 34.6%, 179.0%, respectively, when 0.9% carboxymethylated glucomannan was used. Polyamide-epichlorohydrin (PAE) was used to improve the wet strength of the paper. When 0.6% PAE and 0.6% carboxymethylated glucomannan were used, the burst index, dry tensile index, wet tensile index of paper were increased by 14.1%, 25%, 34.3%, respectively, as compared to that of the control, while the folding endurance decreased slightly. In addition, dry tensile index and wet tensile index were increased with increasing the carboxymethylation time of glucomannan. The results demonstrated that PAE and carboxymethylated glucomannan displayed a synergistic effect. SEM analysis illustrated that paper strengthening agent could increase the combination of fibers in paper. Copyright © 2015 Elsevier Ltd. All rights reserved.

  8. Carbon fiber epoxy composites for both strengthening and health monitoring of structures.

    PubMed

    Salvado, Rita; Lopes, Catarina; Szojda, Leszek; Araújo, Pedro; Gorski, Marcin; Velez, Fernando José; Castro-Gomes, João; Krzywon, Rafal

    2015-05-06

    This paper presents a study of the electrical and mechanical behavior of several continuous carbon fibers epoxy composites for both strengthening and monitoring of structures. In these composites, the arrangement of fibers was deliberately diversified to test and understand the ability of the composites for self-sensing low strains. Composites with different arrangements of fibers and textile weaves, mainly unidirectional continuous carbon reinforced composites, were tested at the dynamometer. A two-probe method was considered to measure the relative electrical resistance of these composites during loading. The measured relative electrical resistance includes volume and contact electrical resistances. For all tested specimens, it increases with an increase in tensile strain, at low strain values. This is explained by the improved alignment of fibers and resulting reduction of the number of possible contacts between fibers during loading, increasing as a consequence the contact electrical resistance of the composite. Laboratory tests on strengthening of structural elements were also performed, making hand-made composites by the "wet process", which is commonly used in civil engineering for the strengthening of all types of structures in-situ. Results show that the woven epoxy composite, used for strengthening of concrete elements is also able to sense low deformations, below 1%. Moreover, results clearly show that this textile sensor also improves the mechanical work of the strengthened structural elements, increasing their bearing capacity. Finally, the set of obtained results supports the concept of a textile fabric capable of both structural upgrade and self-monitoring of structures, especially large structures of difficult access and needing constant, sometimes very expensive, health monitoring.

  9. Effective educator-student relationships in nursing education to strengthen nursing students' resilience.

    PubMed

    Froneman, Kathleen; Du Plessis, Emmerentia; Koen, Magdelene P

    2016-06-10

    Little research has been conducted in private nursing schools with regard to the educator-student relationship to strengthen the resilience of nursing students and to improve the educator-student relationship. An effective educator-student relationship is a key factor to ensure a positive learning climate where learning can take place and resilience can be strengthened. The purpose was to explore and describe nursing students' view on the basic elements required for an effective educator-student relationship to strengthen their resilience and the educator-student relationship. This study followed an explorative, descriptive and contextual qualitative design in a private nursing education institution in the North West Province. Purposive sampling was used. The sample consisted of 40 enrolled nursing auxiliary students. The World Café Method was used to collect data, which were analysed by means of content analysis. The following five main themes were identified and included: (1) teaching-learning environment, (2) educator-student interaction, (3) educator qualities, (4) staying resilient and (5) strategies to strengthen resilience. Students need a caring and supportive environment; interaction that is constructive, acknowledges human rights and makes use of appropriate non-verbal communication. The educator must display qualities such as love and care, respect, responsibility, morality, patience, being open to new ideas, motivation, willingness to 'go the extra mile' and punctuality. Students reported on various ways how they manage to stay resilient. It thus seems that basic elements required in an effective educator-student relationship to strengthen the resilience of students include the environment, interaction, educator and student's qualities and resilience.

  10. 77 FR 52742 - Public Meeting-Strengthening the National Medical Device Postmarket Surveillance System; Request...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-30

    ...] Public Meeting--Strengthening the National Medical Device Postmarket Surveillance System; Request for... ``Public Meeting--Strengthening the National Medical Device Postmarket Surveillance System.'' The purpose of the meeting is to solicit public feedback regarding the medical device postmarket surveillance...

  11. Strengthening integrated primary health care in Sofala, Mozambique

    PubMed Central

    2013-01-01

    Background Large increases in health sector investment and policies favoring upgrading and expanding the public sector health network have prioritized maternal and child health in Mozambique and, over the past decade, Mozambique has achieved substantial improvements in maternal and child health indicators. Over this same period, the government of Mozambique has continued to decentralize the management of public sector resources to the district level, including in the health sector, with the aim of bringing decision-making and resources closer to service beneficiaries. Weak district level management capacity has hindered the decentralization process, and building this capacity is an important link to ensure that resources translate to improved service delivery and further improvements in population health. A consortium of the Ministry of Health, Health Alliance International, Eduardo Mondlane University, and the University of Washington are implementing a health systems strengthening model in Sofala Province, central Mozambique. Description of implementation The Mozambique Population Health Implementation and Training (PHIT) Partnership focuses on improving the quality of routine data and its use through appropriate tools to facilitate decision making by health system managers; strengthening management and planning capacity and funding district health plans; and building capacity for operations research to guide system-strengthening efforts. This seven-year effort covers all 13 districts and 146 health facilities in Sofala Province. Evaluation design A quasi-experimental controlled time-series design will be used to assess the overall impact of the partnership strategy on under-5 mortality by examining changes in mortality pre- and post-implementation in Sofala Province compared with neighboring Manica Province. The evaluation will compare a broad range of input, process, output, and outcome variables to strengthen the plausibility that the partnership strategy led

  12. Discrimination of bullet types using analysis of lead isotopes deposited in gunshot entry wounds.

    PubMed

    Wunnapuk, Klintean; Minami, Takeshi; Durongkadech, Piya; Tohno, Setsuko; Ruangyuttikarn, Werawan; Moriwake, Yumi; Vichairat, Karnda; Sribanditmongkol, Pongruk; Tohno, Yoshiyuki

    2009-01-01

    In order to discriminate bullet types used in firearms, of which the victims died, the authors investigated lead isotope ratios in gunshot entry wounds from nine lead (unjacketed) bullets, 15 semi-jacketed bullets, and 14 full-jacketed bullets by inductively coupled plasma-mass spectrometry. It was found that the lead isotope ratio of 207/206 in gunshot entry wounds was the highest with lead bullets, and it decreased in order from full-jacketed to semi-jacketed bullets. Lead isotope ratios of 208/206 or 208/207 to 207/206 at the gunshot entry wound were able to discriminate semi-jacketed bullets from lead and full-jacketed ones, but it was difficult to discriminate between lead and full-jacketed bullets. However, a combination of element and lead isotope ratio analyses in gunshot entry wounds enabled discrimination between lead, semi-jacketed, and full-jacketed bullets.

  13. Double-ended metal halide arc discharge lamp with electrically isolated containment shroud

    NASA Technical Reports Server (NTRS)

    Muzeroll, Martin M. (Inventor)

    1994-01-01

    A double-ended arc discharge lamp includes a sealed, light-transmissive outer jacket, a light-transmissive shroud mounted within the outer jacket and directly supported by the outer jacket, and an arc discharge tube mounted within the shroud. The arc tube is typically a metal halide arc discharge tube. In a preferred embodiment, the shroud includes an outwardly flared portion at each end. The outwardly flared portions space the shroud from the outer jacket and support the shroud within the outer jacket. The outwardly flared portions of the shroud can be affixed to the outer jacket by fusing. The outer jacket can be provided with inwardly extending dimples for locating the shroud with respect to the outer jacket. In another embodiment, the outer jacket includes reduced diameter portions near each end which are attached to the shroud.

  14. An Analysis of Strengthening Mechanisms and Rate-Dependence in a High Strength Aluminum Alloy

    NASA Astrophysics Data System (ADS)

    Cao, B.; Shaeffer, M.; Cadel, D.; Ramesh, K. T.; Prasad, S.

    2017-11-01

    We examine the strengthening mechanisms within a high-strength aluminum alloy with the objective of providing guidelines for increased strength. First, we measure the mechanical behavior of the age-hardenable Al-Cu-Mg-Ag alloy known as Al 2139 in the T8 condition, and observe strengths of 500 MPa at quasistatic strain rates and average strengths of up to 600 MPa at high strain rates. Next, we explore the reasons for the high strength of this alloy by considering the contributions of various strengthening mechanisms to the total strength of the material. Finally, we develop an analytical approach to estimating the strengthening developed through the mechanism of dislocation cutting of closely spaced plate-like semi-coherent precipitates. Our results suggest that dislocation cutting of the Ω phase is the primary strengthening mechanism in this alloy.

  15. Strengthening 4-H by Analyzing Enrollment Data

    ERIC Educational Resources Information Center

    Hamilton, Stephen F.; Northern, Angela; Neff, Robert

    2014-01-01

    The study reported here used data from the ACCESS 4-H Enrollment System to gain insight into strengthening New York State's 4-H programming. Member enrollment lists from 2009 to 2012 were analyzed using Microsoft Excel to determine trends and dropout rates. The descriptive data indicate declining 4-H enrollment in recent years and peak enrollment…

  16. Interacting effects of strengthening and twin boundary migration in nanotwinned materials

    NASA Astrophysics Data System (ADS)

    Joshi, Kartikey; Joshi, Shailendra P.

    Twin boundaries play a governing role in the mechanical characteristics of nanotwinned materials. They act as yield strengthening agents by offering resistance to non-coplanar dislocation slip. Twin boundary migration may cause yield softening while also enhancing the strain hardening response. In this work, we investigate the interaction between strengthening and twin boundary migration mechanisms by developing a length-scale dependent crystal plasticity framework for face-centered-cubic nanotwinned materials. The crystal plasticity model incorporates strengthening mechanisms due to dislocation pile-up via slip and slip-rate gradients and twin boundary migration via source-based twin partial nucleation and lattice dislocation-twin boundary interaction. The coupled effect of the load orientation and initial twin size on the speed of twin boundary is discussed and an expression for the same is proposed in terms of relevant material parameters. The efficacy of finite element simulations and the analytical expression in predicting evolution of nanotwinned microstructures comprising size and spatial distributions of twins is demonstrated.

  17. TECHNICAL NOTE: The strengthening effect of guar gum on the yield stress of magnetorheological fluid

    NASA Astrophysics Data System (ADS)

    Wu, Wei Ping; Zhao, Bin Yuan; Wu, Qing; Chen, LeSheng; Hu, Ke Ao

    2006-08-01

    In this paper we present a novel approach for producing obvious strengthening of the magnetorheological (MR) effect of MR fluids. Carbonyl iron powders coated with guar gum were used as magnetic particles in the MR fluid. Experimental results showed that inducing a guar gum coating not only greatly improved the sedimentation stability but also strengthened the yield stress of the MR fluid. An intermolecular force based model was proposed for explaining the strengthening effect.

  18. Stacking-fault strengthening of biomedical Co-Cr-Mo alloy via multipass thermomechanical processing.

    PubMed

    Yamanaka, Kenta; Mori, Manami; Sato, Shigeo; Chiba, Akihiko

    2017-09-07

    The strengthening of metallic biomaterials, such as Co-Cr-Mo and titanium alloys, is of crucial importance to the improvement of the durability of orthopedic implants. In the present study, we successfully developed a face-centered cubic (fcc) Co-Cr-Mo alloy with an extremely high yield strength (1400 MPa) and good ductility (12%) by multipass hot-rolling, which is suitable for industrial production, and examined the relevant strengthening mechanisms. Using an X-ray diffraction line-profile analysis, we revealed that a substantial increase in the number of stacking faults (SFs) in the fcc γ-matrix occurred at a greater height reduction (r), while physical modeling demonstrated that the contribution of the accumulated SFs (i.e., the reduction in SF spacing) with an increase in r successfully explains the entire strengthening behavior of the hot-rolled alloy. The present study sheds light on the importance of the SF strengthening mechanism, and will help to guide the design and manufacturing strategy for the high-strength Co-Cr-Mo alloys used in highly durable medical devices.

  19. Experimental study on fatigue crack propagation rate of RC beam strengthened with carbon fiber laminate

    NASA Astrophysics Data System (ADS)

    Huang, Peiyan; Liu, Guangwan; Guo, Xinyan; Huang, Man

    2008-11-01

    The experimental research on fatigue crack propagation rate of reinforced concrete (RC) beams strengthened with carbon fiber laminate (CFL) is carried out by MTS system in this paper. The experimental results show that, the main crack propagation on strengthened beam can be summarized into three phases: 1) fast propagation phase; 2) steady propagation and rest phase; 3) unsteady propagation phase. The phase 2-i.e. steady propagation and rest stage makes up about 95% of fatigue life of the strengthened beam. The propagation rate of the main crack, da/dN, in phase 2 can be described by Paris formula, and the constant C and m can be confirmed by the fatigue crack propagation experiments of the RC beams strengthened with CFL under three-point bending loads.

  20. Strengthening and toughening metallic glasses: The elastic perspectives and opportunities

    NASA Astrophysics Data System (ADS)

    Liu, Z. Q.; Zhang, Z. F.

    2014-04-01

    There exist general conflicts between strength and toughness in crystalline engineering materials, and various strengthening and toughening strategies have been developed from the dislocation motion perspectives. Metallic glasses (MGs) have demonstrated great potentials owing to their unique properties; however, their structural applications are strictly limited. One of the key problems is that the traditional strengthening and toughening strategies and mechanisms are not applicable in MGs due to the absence of dislocations and crystalline microstructures. Here, we show that the strength and toughness, or equivalently the shear modulus and Poisson's ratio, are invariably mutually exclusive in MGs. Accordingly, the MGs can be categorized into four groups with different levels of integrated mechanical properties. It is further revealed that the conflicts originate fundamentally from the atomic bonding structures and the levels of strength-toughness combinations are indeed dominated by the bulk modulus. Moreover, we propose novel strategies for optimizing the mechanical properties of MGs from the elastic perspectives. We emphasize the significance of developing high bulk modulus MGs to achieve simultaneously both high strength and good toughness and highlight the elastic opportunities for strengthening and toughening materials.

  1. How AIDS funding strengthens health systems: progress in pharmaceutical management.

    PubMed

    Embrey, Martha; Hoos, David; Quick, Jonathan

    2009-11-01

    In recent years, new global initiatives responding to the AIDS crisis have dramatically affected-and often significantly improved-how developing countries procure, distribute, and manage pharmaceuticals. A number of developments related to treatment scale-up, initially focused on AIDS-related products, have created frameworks for widening access to medicines for other diseases that disproportionally impact countries with limited resources and for strengthening health systems overall. Examples of such systems strengthening have come in the areas of drug development and pricing; policy and regulation; pharmaceutical procurement, distribution, and use; and management systems, such as for health information and human resources. For example, a hospital in South Africa developed new tools to decentralize provision of antiretroviral therapy to local clinics-bringing treatment closer to patients and shifting responsibility from scarce pharmacists to lower level pharmacy staff. Successful, the system was expanded to patients with other chronic conditions, such as mental illness. Progress toward universal access to HIV prevention, treatment, care, and support will continue the push to strengthen pharmaceutical sectors that serve not only HIV-related needs but all health needs; health experts can likely take these achievements further to maximize their expansion into the wider health system.

  2. Strengthening and toughening metallic glasses: The elastic perspectives and opportunities

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Liu, Z. Q.; Zhang, Z. F., E-mail: zhfzhang@imr.ac.cn

    2014-04-28

    There exist general conflicts between strength and toughness in crystalline engineering materials, and various strengthening and toughening strategies have been developed from the dislocation motion perspectives. Metallic glasses (MGs) have demonstrated great potentials owing to their unique properties; however, their structural applications are strictly limited. One of the key problems is that the traditional strengthening and toughening strategies and mechanisms are not applicable in MGs due to the absence of dislocations and crystalline microstructures. Here, we show that the strength and toughness, or equivalently the shear modulus and Poisson's ratio, are invariably mutually exclusive in MGs. Accordingly, the MGs canmore » be categorized into four groups with different levels of integrated mechanical properties. It is further revealed that the conflicts originate fundamentally from the atomic bonding structures and the levels of strength-toughness combinations are indeed dominated by the bulk modulus. Moreover, we propose novel strategies for optimizing the mechanical properties of MGs from the elastic perspectives. We emphasize the significance of developing high bulk modulus MGs to achieve simultaneously both high strength and good toughness and highlight the elastic opportunities for strengthening and toughening materials.« less

  3. 75 FR 23582 - Federal Housing Administration: Continuation of FHA Reform-Strengthening Risk Management Through...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-04

    ...-AI81 Federal Housing Administration: Continuation of FHA Reform-- Strengthening Risk Management Through... Federal Housing Administration (FHA) that are designed to strengthen FHA by improving its management of risk. Although the preamble to the final rule correctly provides that the revised net worth...

  4. 75 FR 20717 - Federal Housing Administration: Continuation of FHA Reform; Strengthening Risk Management Through...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-20

    ... Administration: Continuation of FHA Reform; Strengthening Risk Management Through Responsible FHA-Approved...) that are designed to strengthen FHA by improving its management of risk. This final rule increases the... designed to enhance FHA's risk management functions. The announcement preceded completion of an independent...

  5. Designing and measuring the progress and impact of health research capacity strengthening initiatives

    PubMed Central

    2015-01-01

    Strengthening capacity in poorer countries to generate multi-disciplinary health research and to utilise research findings, is one of the most effective ways of advancing the countries' health and development. This paper explores current knowledge about how to design health research capacity strengthening (RCS) programmes and how to measure their progress and impact. It describes a systematic, evidence-based approach for designing such programmes and highlights some of the key challenges that will be faced in the next 10 years. These include designing and implementing common frameworks to facilitate comparisons among capacity strengthening projects, and developing monitoring indicators that can capture their interactions with knowledge users and their impact on changes in health systems. PMID:28281707

  6. Carbon Fiber Epoxy Composites for Both Strengthening and Health Monitoring of Structures

    PubMed Central

    Salvado, Rita; Lopes, Catarina; Szojda, Leszek; Araújo, Pedro; Gorski, Marcin; Velez, Fernando José; Castro-Gomes, João; Krzywon, Rafal

    2015-01-01

    This paper presents a study of the electrical and mechanical behavior of several continuous carbon fibers epoxy composites for both strengthening and monitoring of structures. In these composites, the arrangement of fibers was deliberately diversified to test and understand the ability of the composites for self-sensing low strains. Composites with different arrangements of fibers and textile weaves, mainly unidirectional continuous carbon reinforced composites, were tested at the dynamometer. A two-probe method was considered to measure the relative electrical resistance of these composites during loading. The measured relative electrical resistance includes volume and contact electrical resistances. For all tested specimens, it increases with an increase in tensile strain, at low strain values. This is explained by the improved alignment of fibers and resulting reduction of the number of possible contacts between fibers during loading, increasing as a consequence the contact electrical resistance of the composite. Laboratory tests on strengthening of structural elements were also performed, making hand-made composites by the “wet process”, which is commonly used in civil engineering for the strengthening of all types of structures in-situ. Results show that the woven epoxy composite, used for strengthening of concrete elements is also able to sense low deformations, below 1%. Moreover, results clearly show that this textile sensor also improves the mechanical work of the strengthened structural elements, increasing their bearing capacity. Finally, the set of obtained results supports the concept of a textile fabric capable of both structural upgrade and self-monitoring of structures, especially large structures of difficult access and needing constant, sometimes very expensive, health monitoring. PMID:25954955

  7. Why the Australian Monsoon Strengthened During the Cold Last Glacial Maximum?

    NASA Astrophysics Data System (ADS)

    Yan, M.; Wang, B.; Liu, J.; Ning, L.

    2017-12-01

    The multi-model ensemble simulation suggests that the global monsoon and most sub-monsoons are weakened during the Last Glacial Maximum (LGM) due to the lower green-house gases concentration, the presence of the ice-sheets and the weakened seasonal distribution of insolation. In contrast, the Australian monsoon is strengthened during the LGM. The precipitation there increases in austral summer and decreases in austral winter, so that the annual range or monsoonality increases. The strengthened monsoonality is mainly due to the decreased precipitation in austral winter, which is primarily caused by circulation changes, although the reduced atmospheric water vapor also has a moderate contribution. On the other hand, the strengthened Australian summer monsoon rainfall is likely caused by the change of land-sea thermal contrast due to the alteration of land-sea configuration and by the asymmetric change in sea surface temperature (SST) over Indo-Pacific warm pool region. The strengthened land-sea thermal contrast and Western Pacific-Eastern Indian Ocean thermal gradients in the pre-summer monsoon season triggers a cyclonic wind anomaly that is maintained to the monsoon season, thereby increasing summer precipitation. The increased summer precipitation is associated with the increased cloud cover over the land and decreased cloud cover over the ocean. This may weaken the land-sea thermal contrast, which agrees with the paleoclimate reconstruction. The biases between different models are likely related to the different responses of SST over the North Atlantic Ocean in the pre-summer monsoon season.

  8. Effects of trunk-hip strengthening on standing in children with spastic diplegia: a comparative pilot study.

    PubMed

    Kim, Joong-Hwi; Seo, Hye-Jung

    2015-05-01

    [Purpose] This study evaluated the effects of trunk-hip strengthening exercise on trunk-hip activation and pelvic tilt motion during standing in children with spastic diplegia and compared the improvement of pelvic tilt between the modified trunk-hip strengthening exercise and conventional exercise. [Subjects and Methods] Ten ambulant children with spastic diplegia were randomized to the modified trunk-hip strengthening exercise (n = 5) or conventional exercise (n = 5) group. The intervention consisted of a 6-week modified trunk-hip strengthening exercise 3 times per week. The children were tested for trunk-hip muscles activation and pelvic tilt motion during standing by surface electromyography and an inclinometer before and after the intervention. [Results] The anterior pelvic tilt angle and activation of the extensor spinae, rectus femoris, and semitendinosus during standing decreased significantly in the modified exercise group. The activation of extensor spinae differed significantly between groups. [Conclusion] Compared to the conventional exercise, the modified exercise was more effective for trunk-hip activation improvement and anterior pelvic tilt motion decrease during standing in children with spastic diplegia. We suggest clinicians use an individually tailored modified trunk-hip strengthening exercise for strengthening the weakest muscle groups in children with standing ability problems.

  9. [eHealth in Peru: implementation of policies to strengthen health information systems].

    PubMed

    Curioso, Walter H

    2014-01-01

    Health information systems play a key role in enabling high quality, complete health information to be available in a timely fashion for operational and strategic decision-making that makes it possible to save lives and improve the health and quality of life of the population. In many countries, health information systems are weak, incomplete, and fragmented. However, there is broad consensus in the literature of the need to strengthen health information systems in countries around the world. The objective of this paper is to present the essential components of the conceptual framework to strengthen health information systems in Peru. It describes the principal actions and strategies of the Ministry of Health of Peru during the process of strengthening health information systems. These systems make it possible to orient policies for appropriate decision-making in public health.

  10. Flexural strengthening of Reinforced Concrete (RC) Beams Retrofitted with Corrugated Glass Fiber Reinforced Polymer (GFRP) Laminates

    NASA Astrophysics Data System (ADS)

    Aravind, N.; Samanta, Amiya K.; Roy, Dilip Kr. Singha; Thanikal, Joseph V.

    2015-01-01

    Strengthening the structural members of old buildings using advanced materials is a contemporary research in the field of repairs and rehabilitation. Many researchers used plain Glass Fiber Reinforced Polymer (GFRP) sheets for strengthening Reinforced Concrete (RC) beams. In this research work, rectangular corrugated GFRP laminates were used for strengthening RC beams to achieve higher flexural strength and load carrying capacity. Type and dimensions of corrugated profile were selected based on preliminary study using ANSYS software. A total of twenty one beams were tested to study the load carrying capacity of control specimens and beams strengthened with plain sheets and corrugated laminates using epoxy resin. This paper presents the experimental and theoretical study on flexural strengthening of Reinforced Concrete (RC) beams using corrugated GFRP laminates and the results are compared. Mathematical models were developed based on the experimental data and then the models were validated.

  11. Project DULCE: Strengthening Families through Enhanced Primary Care

    ERIC Educational Resources Information Center

    Sege, Robert; Kaplan-Sanof, Margot; Morton, Samantha J.; Velasco-Hodgson, M. Carolina; Preer, Genevieve; Morakinyo, Grace; DeVos, Ed; Krathen, Julie

    2014-01-01

    Project DULCE (Developmental understanding and legal Collaboration for everyone) integrated the Strengthening families approach to building family protective factors into routine health care visits for infants in a primary health care setting. The core collaborators--Boston medical Center pediatric primary care, the medical-legal partnership |…

  12. Notch strengthening or weakening governed by transition of shear failure to normal mode fracture

    PubMed Central

    Lei, Xianqi; Li, Congling; Shi, Xinghua; Xu, Xianghong; Wei, Yujie

    2015-01-01

    It is generally observed that the existence of geometrical discontinuity like notches in materials will lead to strength weakening, as a resultant of local stress concentration. By comparing the influence of notches to the strength of three typical materials, aluminum alloys with intermediate tensile ductility, metallic glasses with no tensile ductility, and brittle ceramics, we observed strengthening in aluminum alloys and metallic glasses: Tensile strength of the net section in circumferentially notched cylinders increases with the constraint quantified by the ratio of notch depth over notch root radius; in contrast, the ceramic exhibit notch weakening. The strengthening in the former two is due to resultant deformation transition: Shear failure occurs in intact samples while samples with deep notches break in normal mode fracture. No such deformation transition was observed in the ceramic, and stress concentration leads to its notch weakening. The experimental results are confirmed by theoretical analyses and numerical simulation. The results reported here suggest that the conventional criterion to use brittleness and/or ductility to differentiate notch strengthening or weakening is not physically sound. Notch strengthening or weakening relies on the existence of failure mode transition and materials exhibiting shear failure while subjected to tension will notch strengthen. PMID:26022892

  13. Feasibility of ballistic strengthening exercises in neurologic rehabilitation.

    PubMed

    Williams, Gavin; Clark, Ross A; Hansson, Jessica; Paterson, Kade

    2014-09-01

    Conventional methods for strength training in neurologic rehabilitation are not task specific for walking. Ballistic strength training was developed to improve the functional transfer of strength training; however, no research has investigated this in neurologic populations. The aim of this pilot study was to evaluate the feasibility of applying ballistic principles to conventional leg strengthening exercises in individuals with mobility limitations as a result of neurologic injuries. Eleven individuals with neurologic injuries completed seated and reclined leg press using conventional and ballistic techniques. A 2 × 2 repeated-measures analysis of variance was used to compare power measures (peak movement height and peak velocity) between exercises and conditions. Peak jump velocity and peak jump height were greater when using the ballistic jump technique rather than the conventional concentric technique (P < 0.01). These findings suggest that when compared with conventional strengthening exercises, the incorporation of ballistic principles was associated with increased peak height and peak velocities.

  14. The Ottawa panel clinical practice guidelines for the management of knee osteoarthritis. Part two: strengthening exercise programs.

    PubMed

    Brosseau, Lucie; Taki, Jade; Desjardins, Brigit; Thevenot, Odette; Fransen, Marlene; Wells, George A; Mizusaki Imoto, Aline; Toupin-April, Karine; Westby, Marie; Álvarez Gallardo, Inmaculada C; Gifford, Wendy; Laferrière, Lucie; Rahman, Prinon; Loew, Laurianne; De Angelis, Gino; Cavallo, Sabrina; Shallwani, Shirin Mehdi; Aburub, Ala'; Bennell, Kim L; Van der Esch, Martin; Simic, Milena; McConnell, Sara; Harmer, Alison; Kenny, Glen P; Paterson, Gail; Regnaux, Jean-Philippe; Lefevre-Colau, Marie-Martine; McLean, Linda

    2017-05-01

    To identify effective strengthening exercise programs and provide rehabilitation teams and patients with updated, high-quality recommendations concerning traditional land-based exercises for knee osteoarthritis. A systematic search and adapted selection criteria included comparative controlled trials with strengthening exercise programs for patients with knee osteoarthritis. A panel of experts reached consensus on the recommendations using a Delphi survey. A hierarchical alphabetical grading system (A, B, C+, C, D, D+ or D-) was based on statistical significance ( p < 0.5) and clinical importance (⩾15% improvement). The 26 high-quality studies identified demonstrated that various strengthening exercise programs with/without other types of therapeutic exercises are generally effective for improving knee osteoarthritis management within a six-month period. Strengthening exercise programs demonstrated a significant improvement for pain relief (four Grade A, ten Grade B, two Grade C+), physical function (four Grade A, eight Grade B) and quality of life (three Grade B). Strengthening in combination with other types of exercises (coordination, balance, functional) showed a significant improvement in pain relief (three Grade A, 11 Grade B, eight Grade C+), physical function (two Grade A, four Grade B, three Grade C+) and quality of life (one Grade A, one Grade C+). There are a variety of choices for strengthening exercise programs with positive recommendations for healthcare professionals and knee osteoarthritis patients. There is a need to develop combined behavioral and muscle-strengthening strategies to improve long-term maintenance of regular strengthening exercise programs.

  15. Recrystallization characteristics of oxide dispersion strengthened nickel-base alloys

    NASA Technical Reports Server (NTRS)

    Hotzler, R. K.; Glasgow, T. K.

    1980-01-01

    Electron microscopy was employed to study the process of recrystallization in two oxide dispersion strengthened (ODS) mechanically alloyed nickel-base alloys, MA 754 and MA 6000E. MA 754 contained both fine, uniformly dispersed particles and coarser oxides aligned along the working direction. Hot rolled MA 754 had a grain size of 0.5 microns and high dislocation densities. After partial primary recrystallization, the fine grains transformed to large elongated grains via secondary (or abnormal) grain growth. Extruded and rolled MA 6000E contained equiaxed grains of 0.2 micron diameter. Primary recrystallization occurring during working eliminated virtually all dislocations. Conversion from fine to coarse grains was triggered by gamma prime dissolution; this was also a process of secondary or abnormal grain growth. Comparisons were made to conventional and oxide dispersion strengthened nickel-base alloys.

  16. Strengthening the role of Community Health Representatives in the Navajo Nation.

    PubMed

    King, Caroline; Goldman, Alex; Gampa, Vikas; Smith, Casey; Muskett, Olivia; Brown, Christian; Malone, Jamy; Sehn, Hannah; Curley, Cameron; Begay, Mae-Gilene; Nelson, Adrianne Katrina; Shin, Sonya Sunhi

    2017-04-21

    Strengthening Community Health Worker systems has been recognized to improve access to chronic disease prevention and management efforts in low-resource communities. The Community Outreach and Patient Empowerment (COPE) Program is a Native non-profit organization with formal partnerships with both the Navajo Nation Community Health Representative (CHR) Program and the clinical facilities serving the Navajo Nation. COPE works to better integrate CHRs into the local health care system through training, strengthening care coordination, and a standardized culturally appropriate suite of health promotion materials for CHRs to deliver to high-risk individuals in their homes. The objective of this mixed methods, cross sectional evaluation of a longitudinal cohort study was to explore how the COPE Program has effected CHR teams over the past 6 years. COPE staff surveyed CHRs in concurrent years (2014 and 2015) about their perceptions of and experience working with COPE, including potential effects COPE may have had on communication among patients, CHRs, and hospital-based providers. COPE staff also conducted focus groups with all eight Navajo Nation CHR teams. CHRs and other stakeholders who viewed our results agree that COPE has improved clinic-community linkages, primarily through strengthened collaborations between Public Health Nurses and CHRs, and access to the Electronic Health Records. CHRs perceived that COPE’s programmatic support has strengthened their validity and reputation with providers and clients, and has enhanced their ability to positively effect health outcomes among their clients. CHRs report an improved ability to deliver health coaching to their clients. Survey results show that 80. 2% of CHRs feel strongly positive that COPE trainings are useful, while 44.6% of CHRs felt that communication and teamwork had improved because of COPE. These findings suggest that CHRs have experienced positive benefits from COPE through training. COPE may provide a

  17. Effects of Zr Addition on Strengthening Mechanisms of Al-Alloyed High-Cr ODS Steels.

    PubMed

    Ren, Jian; Yu, Liming; Liu, Yongchang; Liu, Chenxi; Li, Huijun; Wu, Jiefeng

    2018-01-12

    Oxide dispersion strengthened (ODS) steels with different contents of zirconium (denoted as 16Cr ODS, 16Cr-0.3Zr ODS and 16Cr-0.6Zr ODS) were fabricated to investigate the effects of Zr on strengthening mechanism of Al-alloyed 16Cr ODS steel. Electron backscatter diffraction (EBSD) results show that the mean grain size of ODS steels could be decreased by Zr addition. Transmission electron microscope (TEM) results indicate that Zr addition could increase the number density but decrease the mean diameter and inter-particle spacing of oxide particles. Furthermore, it is also found that in addition to Y-Al-O nanoparticles, Y-Zr-O oxides with finer size were observed in 16Cr-0.3Zr ODS and 16Cr-0.6Zr ODS steels. These changes in microstructure significantly increase the yield strength (YS) and ultimate tensile strength (UTS) of ODS steels through mechanisms of grain boundary strengthening and dispersion strengthening.

  18. Effects of Zr Addition on Strengthening Mechanisms of Al-Alloyed High-Cr ODS Steels

    PubMed Central

    Ren, Jian; Yu, Liming; Liu, Yongchang; Liu, Chenxi; Li, Huijun; Wu, Jiefeng

    2018-01-01

    Oxide dispersion strengthened (ODS) steels with different contents of zirconium (denoted as 16Cr ODS, 16Cr-0.3Zr ODS and 16Cr-0.6Zr ODS) were fabricated to investigate the effects of Zr on strengthening mechanism of Al-alloyed 16Cr ODS steel. Electron backscatter diffraction (EBSD) results show that the mean grain size of ODS steels could be decreased by Zr addition. Transmission electron microscope (TEM) results indicate that Zr addition could increase the number density but decrease the mean diameter and inter-particle spacing of oxide particles. Furthermore, it is also found that in addition to Y-Al-O nanoparticles, Y-Zr-O oxides with finer size were observed in 16Cr-0.3Zr ODS and 16Cr-0.6Zr ODS steels. These changes in microstructure significantly increase the yield strength (YS) and ultimate tensile strength (UTS) of ODS steels through mechanisms of grain boundary strengthening and dispersion strengthening. PMID:29329260

  19. Strengthening the Canadian alcohol advertising regulatory system.

    PubMed

    Heung, Carly M; Rempel, Benjamin; Krank, Marvin

    2012-05-24

    Research evidence points to harmful effects from alcohol advertising among children and youth. In particular, exposure to alcohol advertising has been associated with adolescents drinking both earlier and heavier. Although current federal and provincial guidelines have addressed advertising practices to prevent underage drinking, practice has not been supported by existing policy. While protective measures such as social marketing campaigns have the potential for counteracting the effects from alcohol advertising, the effectiveness of such measures can be easily drowned out with increasing advertising activities from the alcohol industry, especially without effective regulation. Research reviewed by the European Focus on Alcohol Safe Environment (FASE) Project has identified a set of key elements that are necessary to make alcohol advertising policy measures effective at protecting children and youth from the harmful effects of alcohol marketing. Using these key elements as an evaluation framework, there are critical components in the Canadian alcohol advertising regulatory system that clearly require strengthening. To protect impressionable children and youth against the harmful effects of alcohol advertising, 13 recommendations to strengthen current alcohol advertising regulations in Canada are provided for Canadian policy-makers, advertising standard agencies, and public health groups.

  20. Development oxide dispersion strengthened ferritic steels for fusion

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mukhopadhyay, D.K.; Froes, F.H.; Gelles, D.S.

    1997-04-01

    Uniaxial tension creep response is reported for an oxide dispersion strengthened (ODS) steel, Fe-13.5Cr-2W-0.5Ti-0.25 Y{sub 2}O{sub 3} (in weight percent) manufactured using the mechanical alloying process. Acceptable creep response is obtained at 900{degrees}C.

  1. Strengthening and Refining the Federal-State-Institutional Partnership.

    ERIC Educational Resources Information Center

    Merisotis, Jamie P.

    1991-01-01

    A strengthened student aid partnership between the federal and state governments and colleges needs to use existing funds more efficiently, regulate how students receive aid more effectively, and delineate the rights and responsibilities of each of the major partners more adequately. Better cooperation would benefit taxpayers, institutions, and…

  2. Improving the use of health data for health system strengthening.

    PubMed

    Nutley, Tara; Reynolds, Heidi W

    2013-02-13

    Good quality and timely data from health information systems are the foundation of all health systems. However, too often data sit in reports, on shelves or in databases and are not sufficiently utilised in policy and program development, improvement, strategic planning and advocacy. Without specific interventions aimed at improving the use of data produced by information systems, health systems will never fully be able to meet the needs of the populations they serve. To employ a logic model to describe a pathway of how specific activities and interventions can strengthen the use of health data in decision making to ultimately strengthen the health system. A logic model was developed to provide a practical strategy for developing, monitoring and evaluating interventions to strengthen the use of data in decision making. The model draws on the collective strengths and similarities of previous work and adds to those previous works by making specific recommendations about interventions and activities that are most proximate to affect the use of data in decision making. The model provides an organizing framework for how interventions and activities work to strengthen the systematic demand, synthesis, review, and use of data. The logic model and guidance are presented to facilitate its widespread use and to enable improved data-informed decision making in program review and planning, advocacy, policy development. Real world examples from the literature support the feasible application of the activities outlined in the model. The logic model provides specific and comprehensive guidance to improve data demand and use. It can be used to design, monitor and evaluate interventions, and to improve demand for, and use of, data in decision making. As more interventions are implemented to improve use of health data, those efforts need to be evaluated.

  3. The Strengthening Families Initiative and Child Care Quality Improvement: How Strengthening Families Influenced Change in Child Care Programs in One State

    ERIC Educational Resources Information Center

    Douglass, Anne; Klerman, Lorraine

    2012-01-01

    Research Findings: This study investigated how the Strengthening Families through Early Care and Education initiative in Illinois (SFI) influenced change in 4 child care programs. Findings indicate that SFI influenced quality improvements through 4 primary pathways: (a) Learning Networks, (b) the quality of training, (c) the engagement of program…

  4. Intergovernmental Approaches for Strengthening K-12 Accountability Systems

    ERIC Educational Resources Information Center

    Armour-Garb, Allison, Ed.

    2007-01-01

    This volume contains an edited transcript of the Rockefeller Institute's October 29, 2007 symposium (Chicago, IL) entitled "Intergovernmental Approaches to Strengthen K-12 Accountability Systems" as well as a framework paper circulated in preparation for the symposium. The transcript begins with a list of the forty state and federal education…

  5. Conceptual Precalculus: Strengthening Students' Quantitative and Covariational Reasoning

    ERIC Educational Resources Information Center

    Madison, Bernard L.; Carlson, Marilyn; Oehrtman, Michael; Tallman, Michael

    2015-01-01

    Research over the past few decades points to ways precalculus and calculus courses can be strengthened to improve student learning in these courses. This research has informed the development of the Algebra and Precalculus Concept Readiness (APCR) and the Calculus Concept Readiness (CCR) assessments. In this article, the authors present three…

  6. Strengthening Democracy and Personal Development through Community Engagement

    ERIC Educational Resources Information Center

    Chickering, Arthur W.

    2008-01-01

    In this article, the author states his belief that community based learning among adults can be a powerful force for encouraging personal development and for strengthening democracy in this multicultural, globally interdependent, battered world. To do so, however, it needs to pervade all the curricula, degree programs, learning contracts, and…

  7. Creep and rupture of an ODS alloy with high stress rupture ductility. [Oxide Dispersion Strengthened

    NASA Technical Reports Server (NTRS)

    Mcalarney, M. E.; Arsons, R. M.; Howson, T. E.; Tien, J. K.; Baranow, S.

    1982-01-01

    The creep and stress rupture properties of an oxide (Y2O3) dispersion strengthened nickel-base alloy, which also is strengthened by gamma-prime precipitates, was studied at 760 and 1093 C. At both temperatures, the alloy YDNiCrAl exhibits unusually high stress rupture ductility as measured by both elongation and reduction in area. Failure was transgranular, and different modes of failure were observed including crystallographic fracture at intermediate temperatures and tearing or necking almost to a chisel point at higher temperatures. While the rupture ductility was high, the creep strength of the alloy was low relative to conventional gamma prime strengthened superalloys in the intermediate temperature range and to ODS alloys in the higher temperature range. These findings are discussed with respect to the alloy composition; the strengthening oxide phases, which are inhomogeneously dispersed; the grain morphology, which is coarse and elongated and exhibits many included grains; and the second phase inclusion particles occurring at grain boundaries and in the matrix. The creep properties, in particular the high stress dependencies and high creep activation energies measured, are discussed with respect to the resisting stress model of creep in particle strengthened alloys.

  8. STRENGTHENING THE GLUTEUS MAXIMUS IN SUBJECTS WITH SACROILIAC DYSFUNCTION.

    PubMed

    Added, Marco Aurélio N; de Freitas, Diego G; Kasawara, Karina T; Martin, Robroy L; Fukuda, Thiago Y

    2018-02-01

    Case series. The literature has emphasized the use of exercise as an intervention for individuals with lumbopelvic pain. However, there is limited information to guide clinicians in exercise selection for those with sacroiliac (SI) joint dysfunction. Altered function of the gluteus maximus has been found in those with SI joint dysfunction. The objective of this case series was to assess the effectiveness of an exercise program directed at increasing gluteus maximus strength in those with clinical tests positive for SI joint dysfunction. The eight subjects in this series presented with lumbopelvic pain and clinical evidence of SI joint dysfunction. Each subject underwent 10 treatments over five weeks consisting of five exercises directed at strengthening the gluteus maximus. Radiological assessment and clinical examination were performed to rule out potential concurrent pathologies. Visual analog pain scale, the Oswestry Disability Index, and strength assessed via hand held dynamometry were measured pre- and post-intervention. A significant (p<0.001) weakness in gluteus maximus was noted when comparing the uninvolved and involved sides pre-intervention. After completing the strengthening exercise program over 10 visits, statistically significant (p<0.002) increases in gluteus maximus strength and function were found, as well as a decrease in pain. All subjects were discharged from physical therapy and able to return to their normal daily activities. The results of this case series support the use of gluteus maximus strengthening exercises in those with persistent lumbopelvic pain and clinical tests positive for SI joint dysfunction.

  9. The effect of solute additions on the steady-state creep behavior of dispersion-strengthened aluminum.

    NASA Technical Reports Server (NTRS)

    Reynolds, G. H.; Lenel, F. V.; Ansell, G. S.

    1971-01-01

    The effect of solute additions on the steady-state creep behavior of coarse-grained dispersion-strengthened aluminum alloys was studied. Recrystallized dispersion-strengthened solid solutions were found to have stress and temperature sensitivities quite unlike those observed in single-phase solid solutions having the same composition and grain size. The addition of magnesium or copper to the matrix of a recrystallized dispersion-strengthened aluminum causes a decrease in the steady-state creep rate which is much smaller than that caused by similar amounts of solute in single-phase solid solutions. All alloys exhibited essentially a 4.0 power stress exponent in agreement with the model of Ansell and Weertman. The activation energy for steady-state creep in dispersion-strengthened Al-Mg alloys, as well as the stress dependence, was in agreement with the physical model of dislocation climb over the dispersed particles.

  10. Cryogenic properties of dispersion strengthened copper for high magnetic fields

    NASA Astrophysics Data System (ADS)

    Toplosky, V. J.; Han, K.; Walsh, R. P.; Swenson, C. A.

    2014-01-01

    Cold deformed copper matrix composite conductors, developed for use in the 100 tesla multi-shot pulsed magnet at the National High Magnetic Field Laboratory (NHMFL), have been characterized. The conductors are alumina strengthened copper which is fabricated by cold drawing that introduces high dislocation densities and high internal stresses. Both alumina particles and high density of dislocations provide us with high tensile strength and fatigue endurance. The conductors also have high electrical conductivities because alumina has limited solubility in Cu and dislocations have little scattering effect on conduction electrons. Such a combination of high strength and high conductivity makes it an excellent candidate over other resistive magnet materials. Thus, characterization is carried out by tensile testing and fully reversible fatigue testing. In tensile tests, the material exceeds the design criteria parameters. In the fatigue tests, both the load and displacement were measured and used to control the amplitude of the tests to simulate the various loading conditions in the pulsed magnet which is operated at 77 K in a non-destructive mode. In order to properly simulate the pulsed magnet operation, strain-controlled tests were more suitable than load controlled tests. For the dispersion strengthened coppers, the strengthening mechanism of the aluminum oxide provided better tensile and fatigue properties over convention copper.

  11. Burnishing Techniques Strengthen Hip Implants

    NASA Technical Reports Server (NTRS)

    2010-01-01

    In the late 1990s, Lambda Research Inc., of Cincinnati, Ohio, received Small Business Innovation Research (SBIR) awards from Glenn Research Center to demonstrate low plasticity burnishing (LPB) on metal engine components. By producing a thermally stable deep layer of compressive residual stress, LPB significantly strengthened turbine alloys. After Lambda patented the process, the Federal Aviation Administration accepted LPB for repair and alteration of commercial aircraft components, the U.S. Department of Energy found LPB suitable for treating nuclear waste containers at Yucca Mountain. Data from the U.S. Food and Drug Administration confirmed LPB to completely eliminate the occurrence of fretting fatigue failures in modular hip implants.

  12. Time Strengthening of Crystal Nanocontacts

    NASA Astrophysics Data System (ADS)

    Mazo, Juan J.; Dietzel, Dirk; Schirmeisen, Andre; Vilhena, J. G.; Gnecco, Enrico

    2017-06-01

    We demonstrate how an exponentially saturating increase of the contact area between a nanoasperity and a crystal surface, occurring on time scales governed by the Arrhenius equation, is consistent with measurements of the static friction and lateral contact stiffness on a model alkali-halide surface at different temperatures in ultrahigh vacuum. The "contact ageing" effect is attributed to atomic attrition and is eventually broken by thermally activated slip of the nanoasperity on the surface. The combination of the two effects also leads to regions of strengthening and weakening in the velocity dependence of the friction, which are well-reproduced by an extended version of the Prandtl-Tomlinson model.

  13. Acoustic emission monitoring of concrete columns and beams strengthened with fiber reinforced polymer sheets

    NASA Astrophysics Data System (ADS)

    Ma, Gao; Li, Hui; Zhou, Wensong; Xian, Guijun

    2012-04-01

    Acoustic emission (AE) technique is an effective method in the nondestructive testing (NDT) field of civil engineering. During the last two decades, Fiber reinforced polymer (FRP) has been widely used in repairing and strengthening concrete structures. The damage state of FRP strengthened concrete structures has become an important issue during the service period of the structure and it is a meaningful work to use AE technique as a nondestructive method to assess its damage state. The present study reports AE monitoring results of axial compression tests carried on basalt fiber reinforced polymer (BFRP) confined concrete columns and three-point-bending tests carried on BFRP reinforced concrete beams. AE parameters analysis was firstly utilized to give preliminary results of the concrete fracture process of these specimens. It was found that cumulative AE events can reflect the fracture development trend of both BFRP confined concrete columns and BFRP strengthened concrete beams and AE events had an abrupt increase at the point of BFRP breakage. Then the fracture process of BFRP confined concrete columns and BFRP strengthened concrete beams was studied through RA value-average frequency analysis. The RA value-average frequency tendencies of BFRP confined concrete were found different from that of BFRP strengthened concrete beams. The variation tendency of concrete crack patterns during the loading process was revealed.

  14. Strategies for strengthening the evidence base for employee health promotion programs.

    PubMed

    Goetzel, Ron Z; Schoenman, Julie A; Chapman, Larry S; Anderson, David R; Ozminkowski, Ronald J; Lindsay, Garry M

    2011-01-01

    Employee health promotion programs have been a visible facet of the American workplace for more than 30 years. During that time, a substantial amount of research on best practices has been conducted, but because of a lack of significant public investment in research funding there is still much to be done. Most researchers and practitioners familiar with the literature recognize the need to strengthen the evidence base for the field. In this edition of The Art of Health Promotion we examine the primary recommendations emerging from a recent federally sponsored effort to identify strategies for strengthening the evidence base for employee health promotion.

  15. Patient-centered primary health care: synergy potential for health systems strengthening.

    PubMed

    Stender, S C; Christensen, A

    2013-10-01

    The ultimate goal of government health systems is to provide highly effective equitable services that save lives and reduce morbidity and mortality. The pressure to conform to duplicative global and donor initiatives compounds existing challenges to health systems strengthening such as shortages of human resources for health, weak supply chains, inadequate laboratory services and parallel data management systems. This article illustrates how primary health care, as the point of entry into the health care system for the majority of individuals in sub-Saharan Africa, should be strengthened to ensure that individuals and their communities receive essential, holistic care.

  16. Development of Austenitic ODS Strengthened Alloys for Very High Temperature Applications

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Stubbins, James; Heuser, Brent; Robertson, Ian

    2015-04-22

    This “Blue Sky” project was directed at exploring the opportunities that would be gained by developing Oxide Dispersion Strengthened (ODS) alloys based on the Fe-Cr-Ni austenitic alloy system. A great deal of research effort has been directed toward ferritic and ferritic/martensitic ODS alloys which has resulted in reasonable advances in alloy properties. Similar gains should be possible with austenitic alloy which would also take advantage of other superior properties of that alloy system. The research effort was aimed at the developing an in-depth understanding of the microstructural-level strengthening effects of ODS particles in austentic alloys. This was accomplished on amore » variety of alloy compositions with the main focus on 304SS and 316SS compositions. A further goal was to develop an understanding other the role of ODS particles on crack propagation and creep performance. Since these later two properties require bulk alloy material which was not available, this work was carried out on promising austentic alloy systems which could later be enhanced with ODS strengthening. The research relied on a large variety of micro-analytical techniques, many of which were available through various scientific user facilities. Access to these facilities throughout the course of this work was instrumental in gathering complimentary data from various analysis techniques to form a well-rounded picture of the processes which control austenitic ODS alloy performance. Micromechanical testing of the austenitic ODS alloys confirmed their highly superior mechanical properties at elevated temperature from the enhanced strengthening effects. The study analyzed the microstructural mechanisms that provide this enhanced high temperature performance. The findings confirm that the smallest size ODS particles provide the most potent strengthening component. Larger particles and other thermally- driven precipitate structures were less effective contributors and, in some cases

  17. Does the Addition of Hip Strengthening to a Knee-Focused Exercise Program Improve Outcomes in Patients With Patellofemoral Pain Syndrome?

    PubMed

    Bloomer, Ben A; Durall, Chris J

    2015-11-01

    Patellofemoral pain syndrome (PFPS) is one of the most common disorders affecting the lower extremities. To improve function and decrease pain, affected individuals often undergo a guided rehabilitation program. Traditional programs have concentrated on quadriceps strengthening and other knee-focused exercises, but recent literature suggests that adding hip-muscle strengthening may improve outcomes. This review was conducted to determine the extent to which current evidence supports the addition of hip-muscle strengthening to a knee-focused strengthening and stretching program in the treatment of PFPS. Focused Clinical Question: Does the addition of hip-muscle strengthening to a knee-focused strengthening and stretching program improve outcomes in patients with PFPS?

  18. How Can Comparison Groups Strengthen Regression Discontinuity Designs?

    ERIC Educational Resources Information Center

    Wing, Coady; Cook, Thomas D.

    2011-01-01

    In this paper, the authors examine some of the ways that different types of non-equivalent comparison groups can be used to strengthen causal inferences based on regression discontinuity design (RDD). First, they consider a design that incorporates pre-test data on assignment scores and outcomes that were collected either before the treatment…

  19. Strengthening Foster Parent-Adolescent Relationships through Filial Therapy

    ERIC Educational Resources Information Center

    Capps, Jennifer E.

    2012-01-01

    The purpose of this article is to explore the application of filial therapy as a means of strengthening relationships between foster parents and adolescent foster children. Adolescents in foster care experience a number of placement disruptions and while a number of therapeutic interventions are implemented to assist adolescents in foster care,…

  20. Polytetrafluoroethylene-jacketed stirrer modified with graphene oxide and polydopamine for the efficient extraction of polycyclic aromatic hydrocarbons.

    PubMed

    Zhang, Zinxin; Mwadini, Mwadini Ahmada; Chen, Zilin

    2016-10-01

    Steel stirrers jacketed with polytetrafluoroethylene can be regarded as an ideal substrate for stirrer bar sorptive extraction. However, it is still a great challenge to immobilize graphene onto a polytetrafluoroethylene stirrer due to the high chemical resistance of the surface of a polytetrafluoroethylene stirrer. We describe here a method to modify the surface of polytetrafluoroethylene stirrers with graphene. In this work, graphene was used as the sorbent due to its excellent adsorption capability for aromatic compounds, such as polycyclic aromatic compounds. Graphene was successfully immobilized onto polytetrafluoroethylene-stirrer by a bio-inspired polydopamine functionalization method. The graphene-modified polytetrafluoroethylene-stirrer shows good stability and tolerance to stirring, ultrasonication, strong acidic and basic solutions, and to organic solvents. The multilayer coating was characterized by scanning electronic microscopy and Fourier transform infrared spectroscopy. After the optimization of some experimental conditions, the graphene-modified polytetrafluoroethylene stirrer was used for the stirrer bar sorptive extraction of polycyclic aromatic hydrocarbons, in which the binding between the polycyclic aromatic hydrocarbons and the graphene layer was mainly based on π-π stacking and hydrophobic interactions. The graphene-modified polytetrafluoroethylene-stirrer-based stirrer bar sorptive extraction and high-performance liquid chromatography method was developed for the determination of polycyclic aromatic hydrocarbons with great extraction efficiency, with enrichment factors from 18 to 62. The method has low limits of detection of 1-5 pg/mL, wide linear range (5-100 and 10-200 pg/mL), good linearity (R ≥ 0.9957) and good reproducibility (RSD ≤ 6.45%). The proposed method has been applied to determine polycyclic aromatic hydrocarbons in real dust samples. Good recoveries were obtained, ranging from 88.53 to 109.43%. © 2016 WILEY-VCH Verlag

  1. Children's Books in Review: Books on Strengthening Family Ties.

    ERIC Educational Resources Information Center

    Winfield, Evelyn T.

    1991-01-01

    Reviews children's books that emphasize the strengthening of family ties. Characters in the books realize the importance and influence of family relationships as they struggle with sibling rivalry, self-discovery, peer relationships, a search for heritage, adoption, and death. (SM)

  2. On Roesler and Arzt's new model of creep in dispersion strengthened alloys

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Orlova, A.; Cadek, J.

    1992-08-01

    The model of creep in dispersion (noncoherent particle) strengthened alloys assuming thermally activated detachment of dislocations from particles to be the rate controlling process, recently presented by Roesler and Arzt (1990), is correlated with some available creep and structure data for aluminum alloys strengthened by Al4C3 and Al2O3 particles. It is shown that though the model requires applied stress dependent apparent activation energy of creep, the stress dependence of creep rate can be satisfactorily accounted for even when this activation energy is stress independent, admitting a strong stress dependence of the preexponential structure factor, i.e., of the mobile dislocation density.more » On the other hand, the model is not able to account for the temperature dependence of creep rate if it is significantly stronger than that of the coefficient of lattice diffusion, as is usually the case with alloys strengthened by noncoherent particles in which the attractive dislocation/particle interaction can be expected. 14 refs.« less

  3. Cancer-Specific Mortality Relative to Engagement in Muscle-Strengthening Activities and Lower Extremity Strength.

    PubMed

    Dankel, Scott J; Loenneke, Jeremy P; Loprinzi, Paul D

    2018-02-01

    Skeletal muscle strength and engagement in muscle-strengthening activities are each inversely associated with all-cause mortality; however, less is known on their relationship with cancer-specific mortality. Data from the 1999-2002 National Health and Nutrition Examination Survey were used assessing 2773 individuals aged 50 years or older. Individuals being dichotomized at the 75th percentile for knee extensor strength, and engagement in muscle-strengthening activities was acquired through self-report with ≥2 sessions per week were classified as meeting guidelines. With respect to cancer-specific mortality, individuals in the upper quartile for muscle strength were at a 50% reduced risk (hazard ratio = 0.50; 95% confidence interval, 0.29-0.85; P = .01) and those meeting muscle-strengthening activities were at a nonsignificant 8% reduced risk (hazard ratio = 0.92; 95% confidence interval, 0.45-1.86, P = .81) of cancer-specific mortality after adjusting for covariates. Clinicians should routinely assess lower extremity strength and promote engagement in muscle-strengthening activities aimed at increasing muscle strength.

  4. ASME Section VIII Recertification of a 33,000 Gallon Vacuum-jacketed LH2 Storage Vessel for Densified Hydrogen Testing at NASA Kennedy Space Center

    NASA Technical Reports Server (NTRS)

    Swanger, Adam M.; Notardonato, William U.; Jumper, Kevin M.

    2015-01-01

    The Ground Operations Demonstration Unit for Liquid Hydrogen (GODU-LH2) has been developed at NASA Kennedy Space Center in Florida. GODU-LH2 has three main objectives: zero-loss storage and transfer, liquefaction, and densification of liquid hydrogen. A cryogenic refrigerator has been integrated into an existing, previously certified, 33,000 gallon vacuum-jacketed storage vessel built by Minnesota Valley Engineering in 1991 for the Titan program. The dewar has an inner diameter of 9.5 and a length of 71.5; original design temperature and pressure ranges are -423 F to 100 F and 0 to 95 psig respectively. During densification operations the liquid temperature will be decreased below the normal boiling point by the refrigerator, and consequently the pressure inside the inner vessel will be sub-atmospheric. These new operational conditions rendered the original certification invalid, so an effort was undertaken to recertify the tank to the new pressure and temperature requirements (-12.7 to 95 psig and -433 F to 100 F respectively) per ASME Boiler and Pressure Vessel Code, Section VIII, Division 1. This paper will discuss the unique design, analysis and implementation issues encountered during the vessel recertification process.

  5. Microstructure, strengthening mechanisms and hot deformation behavior of an oxide-dispersion strengthened UFG Al6063 alloy

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Asgharzadeh, H.; Kim, H.S.; Simchi, A., E-mail: simchi@sharif.edu

    2013-01-15

    An ultrafine-grained Al6063/Al{sub 2}O{sub 3} (0.8 vol.%, 25 nm) nanocomposite was prepared via powder metallurgy route through reactive mechanical alloying and hot powder extrusion. Scanning electron microcopy, transmission electron microscopy, and back scattered electron diffraction analysis showed that the grain structure of the nanocomposite is trimodal and composed of nano-size grains (< 0.1 {mu}m), ultrafine grains (0.1-1 {mu}m), and micron-size grains (> 1 {mu}m) with random orientations. Evaluation of the mechanical properties of the nanocomposite based on the strengthening-mechanism models revealed that the yield strength of the ultrafine-grained nanocomposite is mainly controlled by the high-angle grain boundaries rather than nanometricmore » alumina particles. Hot deformation behavior of the material at different temperatures and strain rates was studied by compression test and compared to coarse-grained Al6063 alloy. The activation energy of the hot deformation process for the nanocomposite was determined to be 291 kJ mol{sup -1}, which is about 64% higher than that of the coarse-grained alloy. Detailed microstructural analysis revealed that dynamic recrystallization is responsible for the observed deformation softening in the ultrafine-grained nanocomposite. - Highlights: Black-Right-Pointing-Pointer The strengthening mechanisms of Al6063/Al{sub 2}O{sub 3} nanocomposite were evaluated. Black-Right-Pointing-Pointer Hot deformation behavior of the nanocomposite was studied. Black-Right-Pointing-Pointer The hot deformation activation energy was determined using consecutive models. Black-Right-Pointing-Pointer The restoration mechanisms and microstructural changes are presented.« less

  6. Intermetallic Strengthened Alumina-Forming Austenitic Steels for Energy Applications

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hu, Bin; Baker, Ian

    2016-03-31

    In order to achieve energy conversion efficiencies of >50 % for steam turbines/boilers in power generation systems, the materials required must be strong, corrosion-resistant at high temperatures (>700°C), and economically viable. Austenitic steels strengthened with Laves phase and L1 2 precipitates, and alloyed with aluminum to improve oxidation resistance, are potential candidate materials for these applications. The creep resistance of these alloys is significantly improved through intermetallic strengthening (Laves-Fe 2Nb + L1 2-Ni 3Al precipitates) without harmful effects on oxidation resistance. Microstructural and microchemical analyses of the recently developed alumina-forming austenitic (AFA) steels (Fe-14Cr-32Ni-3Nb-3Al-2Ti-based) indicated they are strengthened by Nimore » 3Al(Ti) L1 2, NiAl B 2, Fe 2Nb Laves phase and MC carbide precipitates. Different thermomechanical treatments (TMTs) were performed on these stainless steels in an attempt to further improve their mechanical properties. The thermo-mechanical processing produced nanocrystalline grains in AFA alloys and dramatically increased their yield strength at room temperature. Unfortunately, the TMTs didn’t increase the yield strengths of AFA alloys at ≥700ºC. At these temperatures, dislocation climb is the dominant mechanism for deformation of TMT alloys according to strain rate jump tests. After the characterization of aged AFA alloys, we found that the largest strengthening effect from L1 2 precipitates can be obtained by aging for less than 24 h. The coarsening behavior of the L1 2 precipitates was not influenced by carbon and boron additions. Failure analysis and post-mortem TEM analysis were performed to study the creep failure mechanisms of these AFA steels after creep tests. Though the Laves and B2-NiAl phase precipitated along the boundaries can improve the creep properties, cracks were still initiated and propagated along the boundaries, which suggests that the boundaries are

  7. METHOD OF TESTING FOR LEAKS

    DOEpatents

    Creutz, E.C.; McAdams, Wm.A.; Foss, M.H.

    1958-07-22

    A method is described for detecting minute holes In fuel element jackets. The method comprises submerging the jacketed body in an atmosphere of a radioactive gas under pressure, the radioactive emanations from said gas being sufficientiy penetratIng to penetrate the jacket of the jacketed body. After the jacketed body is removed from the radtoactive gas atmosphere, it is exannined for the presence of emanations from radioactive gas which entered the jacketed body through the minute holes. In this manner, the detectton of radioactive emanations is a positive indication that the fuel element is not perfectly sealed.

  8. 34 CFR 608.1 - What is the Strengthening Historically Black Colleges and Universities (HBCU) Program?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 3 2010-07-01 2010-07-01 false What is the Strengthening Historically Black Colleges and Universities (HBCU) Program? 608.1 Section 608.1 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION STRENGTHENING...

  9. 40 CFR 141.551 - What strengthened combined filter effluent turbidity limits must my system meet?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false What strengthened combined filter... REGULATIONS Enhanced Filtration and Disinfection-Systems Serving Fewer Than 10,000 People Combined Filter Effluent Requirements § 141.551 What strengthened combined filter effluent turbidity limits must my system...

  10. 40 CFR 141.551 - What strengthened combined filter effluent turbidity limits must my system meet?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 24 2013-07-01 2013-07-01 false What strengthened combined filter... REGULATIONS Enhanced Filtration and Disinfection-Systems Serving Fewer Than 10,000 People Combined Filter Effluent Requirements § 141.551 What strengthened combined filter effluent turbidity limits must my system...

  11. 40 CFR 141.551 - What strengthened combined filter effluent turbidity limits must my system meet?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 23 2014-07-01 2014-07-01 false What strengthened combined filter... REGULATIONS Enhanced Filtration and Disinfection-Systems Serving Fewer Than 10,000 People Combined Filter Effluent Requirements § 141.551 What strengthened combined filter effluent turbidity limits must my system...

  12. 40 CFR 141.551 - What strengthened combined filter effluent turbidity limits must my system meet?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false What strengthened combined filter... REGULATIONS Enhanced Filtration and Disinfection-Systems Serving Fewer Than 10,000 People Combined Filter Effluent Requirements § 141.551 What strengthened combined filter effluent turbidity limits must my system...

  13. 40 CFR 141.551 - What strengthened combined filter effluent turbidity limits must my system meet?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 24 2012-07-01 2012-07-01 false What strengthened combined filter... REGULATIONS Enhanced Filtration and Disinfection-Systems Serving Fewer Than 10,000 People Combined Filter Effluent Requirements § 141.551 What strengthened combined filter effluent turbidity limits must my system...

  14. NOAA Administrative Order 216-115: Strengthening NOAA's Research and

    Science.gov Websites

    Development Enterprise NOAA HOME WEATHER OCEANS FISHERIES CHARTING SATELLITES CLIMATE RESEARCH of Authority NAO 216-115: Strengthening NOAA's Research and Development Enterprise Attachments View principles, policies, and responsibilities for planning, monitoring, evaluating, and reporting research and

  15. A phosphodiesterase 4-controlled switch between memory extinction and strengthening in the hippocampus

    PubMed Central

    Roesler, Rafael; Reolon, Gustavo K.; Maurmann, Natasha; Schwartsmann, Gilberto; Schröder, Nadja; Amaral, Olavo B.; Valvassori, Samira; Quevedo, João

    2014-01-01

    Established fear-related memories can undergo phenomena such as extinction or reconsolidation when recalled. Extinction probably involves the creation of a new, competing memory trace that decreases fear expression, whereas reconsolidation can mediate memory maintenance, updating, or strengthening. The factors determining whether retrieval will initiate extinction, reconsolidation, or neither of these two processes include training intensity, duration of the retrieval session, and age of the memory. However, previous studies have not shown that the same behavioral protocol can be used to induce either extinction or reconsolidation and strengthening, depending on the pharmacological intervention used. Here we show that, within an experiment that leads to extinction in control rats, memory can be strengthened if rolipram, a selective inhibitor of phosphodiesterase type 4 (PDE4), is administered into the dorsal hippocampus immediately after retrieval. The memory-enhancing effect of rolipram lasted for at least 1 week, was blocked by the protein synthesis inhibitor anisomycin, and did not occur when drug administration was not paired with retrieval. These findings indicate that the behavioral outcome of memory retrieval can be pharmacologically switched from extinction to strengthening. The cAMP/protein kinase A (PKA) signaling pathway might be a crucial mechanism determining the fate of memories after recall. PMID:24672454

  16. Self-diagnosis of structures strengthened with hybrid carbon-fiber-reinforced polymer sheets

    NASA Astrophysics Data System (ADS)

    Wu, Z. S.; Yang, C. Q.; Harada, T.; Ye, L. P.

    2005-06-01

    The correlation of mechanical and electrical properties of concrete beams strengthened with hybrid carbon-fiber-reinforced polymer (HCFRP) sheets is studied in this paper. Two types of concrete beams, with and without reinforcing bars, are strengthened with externally bonded HCFRP sheets, which have a self-structural health monitoring function due to the electrical conduction and piezoresistivity of carbon fibers. Parameters investigated include the volume fractions and types of carbon fibers. According to the investigation, it is found that the hybridization of uniaxial HCFRP sheets with several different types of carbon fibers is a viable method for enhancing the mechanical properties and obtaining a built-in damage detection function for concrete structures. The changes in electrical resistance during low strain ranges before the rupture of carbon fibers are generally smaller than 1%. Nevertheless, after the gradual ruptures of carbon fibers, the electrical resistance increases remarkably with the strain in a step-wise manner. For the specimens without reinforcing bars, the electrical behaviors are not stable, especially during the low strain ranges. However, the electrical behaviors of the specimens with reinforcing bars are relatively stable, and the whole range of self-sensing function of the HCFRP-strengthened RC structures has realized the conceptual design of the HCFRP sensing models and is confirmed by the experimental investigations. The relationships between the strain/load and the change in electrical resistance show the potential self-monitoring capacity of HCFRP reinforcements used for strengthening concrete structures.

  17. Effectiveness of Hip External Rotator Strengthening Exercise in Korean Postural Bowleg Women.

    PubMed

    Park, Seong Hoon; Lee, Jun Won; Kim, Joo Hyun; Tak, Kyoung Seok; Lee, Byeong Ho; Suh, In Suck

    2017-08-01

    Postural bowleg is a subclinical entity with both aesthetic and functional outcomes and appears to be common in East Asian countries. Internal rotation of the hip joint is associated with varus alignment at the knee joint of the bowleg. Strengthening exercise for the hip external rotator muscles seems to be effective in improving varus alignment of bowleg, but no standardized exercise program exists. A standardized active resistance strengthening exercise for hip external rotator muscles could improve varus alignment of the lower limb in bowlegged Korean women. In this article, a case series study was conducted to observe changes following a standardized 3-month program using equipment designed for strengthening of the hip external rotator muscles. Photogrammetric and radiographic data were used to compare the gap between knees and tibiofemoral (TF) angles before and after the exercise program. As a result, on average, the knee gap decreased by 1.6 cm. The TF angle decreased by 1.5°. Regression analysis revealed a statistically significant association between changes in knee gap and TF angle. The standardized 3-month active resistance strengthening exercise program of hip external rotator muscles was effective in improving postural deviation and cosmetic outcomes in bowlegged Korean women. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

  18. Programs for Strengthening Families of State Prison Staff

    ERIC Educational Resources Information Center

    Tripp, Paula J.

    2010-01-01

    This article describes "Training for Strong Families," a family strengthening program for officers working in the state prison system. The program was offered once per week on the same day and at the same time, and the sessions lasted 15-20 minutes. The new program included topics such as Budgeting 101, Relationships, and Stress Management.…

  19. Cracking of Beams Strengthened with Externally Bonded SRP Tapes

    NASA Astrophysics Data System (ADS)

    Krzywoń, Rafał

    2017-10-01

    Paper discusses strengthening efficiency of relatively new kind of SRP composite based on high strength steel wires. They are made of ultra-high strength steel primarily used in cords of car tires. Through advanced treatment, the mechanical properties of SRP steel are similar to other high carbon cold drawn steels used in construction industry. Strength significantly exceed 2000 MPa, there is no perfect plasticity at yield stress level. Almost linear stress-strain relationship makes SRP steel mechanical properties similar to carbon fibers. Also flexibility and weight ratio of the composite overlay is slightly worse than CFRP strip. Despite these advantages SRP is not as popular as other composites reinforced with fibers of high strength. This is due to the small number of studies of SRP behavior and applicability. Paper shows selected results of the laboratory test of beams strengthened with use of SRP and CFRP externally bonded overlays. Attention has been focused primarily on the phenomenon of cracking. Comparison include the cracking moment, crack width and spacing, coverage of crack zone. Despite the somewhat lower rigidity of SRP tapes, they have a much better adhesion to concrete, so that the crack width is comparable in almost the whole load range. The paper also includes an assessment of the common methods of checking the condition of cracking in relation to the tested SRP strengthening. The paper presents actual calculation procedures to determine the crack spacing and crack width. The discussed formulas are verified with results of provided laboratory tests.

  20. Cognitive health benefits of strengthening exercise for community-dwelling older adults.

    PubMed

    Anderson-Hanley, Cay; Nimon, Joseph P; Westen, Sarah C

    2010-11-01

    While aerobic exercise has been linked to improved performance on cognitive tasks of executive functioning among older adults, not all older adults can avail themselves of such exercise due to physical limitations. In this study, community-dwelling older adults were evaluated on tasks of executive functioning before and after a month-long strengthening, nonaerobic exercise program. A total of 16 participants who engaged in such exercise showed significantly improved scores on Digits Backward and Stroop C tasks when compared to 16 participants who were on an exercise waiting list. Positive benefits of strengthening exercise on cognition are supported. Additional research is needed to clarify the generalizability of these findings.

  1. Regional Cooperation to Strengthen Safeguards

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Minnini, Margot; Elkhamri, Oksana O.

    2016-06-06

    President Obama’s decision over four years ago to ”pivot” toward Asia represented an important strategic shift in American foreign policy and a rebalancing of U.S. economic and security engagement in the Asia-Pacific countries. The United States has since supported a variety of regional initiatives aimed at promoting nuclear security and safeguards. When a new regional organization, the Asia-Pacific Safeguards Network (APSN) was established in 2010, DOE/NNSA became an early member and enthusiastic advocate. Launched on the initiative of Australia, Japan, Republic of Korea, and Indonesia, the APSN aims to strengthen the quality and effectiveness of safeguards implementation in the Asia-Pacificmore » region.« less

  2. Effect of eccentric isokinetic strengthening in the rehabilitation of patients with knee osteoarthritis: Isogo, a randomized trial

    PubMed Central

    2014-01-01

    Background Femorotibial knee osteoarthritis is associated with muscle weakness in the lower limbs, particularly in the quadriceps, which results in disease progression. The interest of having muscular strengthening as part of the therapeutic arsenal for the medical treatment of knee osteoarthritis is now well established. The functional disability induced by knee osteoarthritis manifests itself principally when walking, notably downhill, during which the muscles are called upon to contract eccentrically. We can therefore think that eccentric muscular strengthening could bring a functional benefit that is superior to concentric muscular strengthening. Methods/Design This is a prospective, randomized, bicenter, parallel-group, international study. Eighty patients aged from 40 to 75 years old, suffering from medical-stage knee osteoarthritis, will undertake 6 weeks of isokinetic muscular strengthening. Randomization determines the mode of muscular strengthening: either exclusively eccentric or exclusively concentric. The principal objective is to demonstrate the superiority of the improvement in the quadriceps isokinetic torque after isokinetic muscular strengthening by the eccentric mode compared to the concentric mode. The following parameters are also evaluated: the variations in the level of pain, the parameters of walking (maximum speed over 10 and 200 meters, analysis on a computerized Gaitrite™ treadmill), static equilibrium (on a FUSYO™ force platform), and the functional status of the patient using the Western Ontario and MacMaster Universities osteoarthritis index (WOMAC) questionnaire after the strengthening period and at 6 months. Discussion A better knowledge of the most effective mode of muscular strengthening is needed to optimize the functional benefits to the patients. In case of superiority in terms of efficacy of the eccentric mode, the latter could be given priority in the rehabilitation treatment of knee osteoarthritis patients. Trial

  3. Effect of eccentric isokinetic strengthening in the rehabilitation of patients with knee osteoarthritis: Isogo, a randomized trial.

    PubMed

    Jegu, Anne-Gaëlle; Pereira, Bruno; Andant, Nicolas; Coudeyre, Emmanuel

    2014-04-02

    Femorotibial knee osteoarthritis is associated with muscle weakness in the lower limbs, particularly in the quadriceps, which results in disease progression. The interest of having muscular strengthening as part of the therapeutic arsenal for the medical treatment of knee osteoarthritis is now well established.The functional disability induced by knee osteoarthritis manifests itself principally when walking, notably downhill, during which the muscles are called upon to contract eccentrically.We can therefore think that eccentric muscular strengthening could bring a functional benefit that is superior to concentric muscular strengthening. This is a prospective, randomized, bicenter, parallel-group, international study. Eighty patients aged from 40 to 75 years old, suffering from medical-stage knee osteoarthritis, will undertake 6 weeks of isokinetic muscular strengthening. Randomization determines the mode of muscular strengthening: either exclusively eccentric or exclusively concentric.The principal objective is to demonstrate the superiority of the improvement in the quadriceps isokinetic torque after isokinetic muscular strengthening by the eccentric mode compared to the concentric mode.The following parameters are also evaluated: the variations in the level of pain, the parameters of walking (maximum speed over 10 and 200 meters, analysis on a computerized Gaitrite™ treadmill), static equilibrium (on a FUSYO™ force platform), and the functional status of the patient using the Western Ontario and MacMaster Universities osteoarthritis index (WOMAC) questionnaire after the strengthening period and at 6 months. A better knowledge of the most effective mode of muscular strengthening is needed to optimize the functional benefits to the patients. In case of superiority in terms of efficacy of the eccentric mode, the latter could be given priority in the rehabilitation treatment of knee osteoarthritis patients. Clinical trials.gov number: NCT01586130.

  4. Elements for harnessing participatory action research to strengthen health managers' capacity: a critical interpretative synthesis.

    PubMed

    Tetui, Moses; Zulu, Joseph Mumba; Hurtig, Anna-Karin; Ekirapa-Kiracho, Elizabeth; Kiwanuka, Suzanne N; Coe, Anna-Britt

    2018-04-19

    Health managers play a key role in ensuring that health services are responsive to the needs of the population. Participatory action research (PAR) is one of the approaches that have been used to strengthen managers' capacity. However, collated knowledge on elements for harnessing PAR to strengthen managers' capacity is missing. This paper bridges this gap by reviewing existing literature on the subject matter. A critical interpretive synthesis method was used to interrogate eight selected articles. These articles reported the use of PAR to strengthen health managers' capacity. The critical interpretive synthesis method's approach to analysis guided the synthesis. Here, the authors interpretively made connections and linkages between different elements identified in the literature. Finally, the Atun et al. (Heal Pol Plann, 25:104-111, 2010) framework on integration was used to model the elements synthesised in the literature into five main domains. Five elements with intricate bi-directional interactions were identified in the literature reviewed. These included a shared purpose, skilled facilitation and psychological safety, activity integration into organisational procedures, organisational support, and external supportive monitoring. A shared purpose of the managers' capacity strengthening initiative created commitment and motivation to learn. This purpose was built upon a set of facilitation skills that included promoting participation, self-efficacy and reflection, thereby creating a safe psychological space within which the managers interacted and learnt from each other and their actions. Additionally, an integrated intervention strengthened local capacity and harnessed organisational support for learning. Finally, supportive monitoring from external partners, such as researchers, ensured quality, building of local capacity and professional safety networks essential for continued learning. The five elements identified in this synthesis provide a basis upon

  5. Insights: The Right Way to Strengthen U.S. Technology.

    ERIC Educational Resources Information Center

    Stata, Ray

    1983-01-01

    Discusses issues and problems related to strengthening and maintaining United States leadership in high technology. Among the areas considered are industry/university cooperatives, graduate study, financial support, and state/federal government roles. Indicates that prospects for maintaining leadership are high provided issues related to human…

  6. "Strengthening" Ontario Universities: A Neoliberal Reconstruction of Higher Education

    ERIC Educational Resources Information Center

    Rigas, Bob; Kuchapski, Renée

    2016-01-01

    This paper reviews neoliberalism as an ideology that has influenced higher education generally and Ontario higher education in particular. It includes a discourse analysis of "Strengthening Ontario's Centres of Creativity, Innovation and Knowledge" (Ontario Ministry of Training, Colleges, and Universities, 2012), a government discussion…

  7. Fiber reinforced cementitious matrix (FRCM) composites for reinforced concrete strengthening.

    DOT National Transportation Integrated Search

    2013-07-01

    Fiber-reinforced composite systems are widely used for strengthening, repairing, and rehabilitation of reinforced concrete structural : members. A promising newly-developed type of composite, comprised of fibers and an inorganic cement-based matrix, ...

  8. Nonlinear analysis of concrete beams strengthened by date palm fibers

    NASA Astrophysics Data System (ADS)

    Bouzouaid, Samia; Kriker, Abdelouahed

    2017-02-01

    The behaviour of concrete beams strengthened with date palm fibers was studied by Nonlinear Finite Element Analysis using ANSYS software. Five beams that were experimentally tested in a previous research were considered. The results obtained from the ANSYS finite element analysis are compared with the experimental data for the five beams with different amounts of fibres, ranging from 0.2% to 0.5% by a step equal to 0.1% and with a fibre length of 0.04 m. The results obtained by FEA showed good agreement with those obtained by the experimental program. This research demonstrates the ability of FEA in predicting the behaviour of beams strengthened with Date Palm fibers. It will help researchers in studying beams with different configurations without the need to go through the lengthy experimental testing programs.

  9. Strengthening syntheses on fire: Increasing their usefulness for managers

    Treesearch

    Jane Kapler Smith

    2015-01-01

    A synthesis for fire managers summarizes and interprets a body of information, presents its meaning in an objective, unbiased way, and describes its implications for decisionmakers. Following are suggestions for ways to strengthen syntheses on fire and on other natural resource issues:Include managers, scientists, and...

  10. Strengthening the Scholarship of Teaching and Learning via Experimentation

    ERIC Educational Resources Information Center

    LoSchiavo, Frank M.; Shatz, Mark A.; Poling, Devereaux A.

    2008-01-01

    In recent years, national policy experts have questioned the overall quality of educational research, and they have suggested that researchers strengthen their scientific methods by maximizing the use of experimental designs. To promote more rigorous methodology, we discuss several new and often-overlooked opportunities for incorporating…

  11. Implementation of Open and Closed Kinetic Chain Quadriceps Strengthening Exercises after Anterior Cruciate Ligament Reconstruction.

    ERIC Educational Resources Information Center

    Ross, Michael D.; Denegar, Craig R.; Winzenried, Jay A.

    2001-01-01

    Reviews the effects of open kinetic chain (OKC) and closed kinetic chain (CKC) exercise on anterior cruciate ligament (ACL) strain and patellofemoral joint stress, suggesting a combination of the two for quadriceps strengthening after ACL reconstruction. Both OKC and CKC exercises may be modified and implemented for quadriceps strengthening after…

  12. Role of back stress in the creep behavior of particle strengthened alloys

    NASA Technical Reports Server (NTRS)

    Purushothaman, S.; Tien, J. K.

    1978-01-01

    Recent developments in the interpolation of high-temperature steady-state creep results have introduced the concept that the stress dependence of the creep rate should be in terms of the effective stress referred to as the applied stress minus a back stress. This paper reports on back stresses taken from data on a gamma-prime-strengthened wrought nickel-base superalloy, an oxide dispersion-strengthened ODS nickel-base solid solution alloy, and an ODS nickel-base superalloy. The effect of air versus vacuum environments and the effect of dynamic changes in the strengthening microstructures on the magnitude of the back stress are assessed. The role of modulus normalization and the back stress correction in determining the true creep activation energy are examined. It is shown that the high values of the apparent stress exponent 'n' of the steady-state creep equation can be easily explained through a relationship between n, the true stress exponent of steady-state creep, and the stress which when subtracted from the applied stress results in the effective driving stress acting on the mobile dislocations during creep.

  13. Manufacturing Experience for Oxide Dispersion Strengthened Alloys

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bennett, Wendy D.; Doherty, Ann L.; Henager, Charles H.

    2016-09-22

    This report documents the results of the development and the manufacturing experience gained at the Pacific Northwest National Laboratories (PNNL) while working with the oxide dispersion strengthened (ODS) materials MA 956, 14YWT, and 9YWT. The Fuel Cycle Research and Development program of the Office of Nuclear Energy has implemented a program to develop a Uranium-Molybdenum metal fuel for light water reactors. ODS materials have the potential to provide improved performance for the U-Mo concept.

  14. Thermocouple assembly

    DOEpatents

    Thermos, Anthony Constantine; Rahal, Fadi Elias

    2002-01-01

    A thermocouple assembly includes a thermocouple; a plurality of lead wires extending from the thermocouple; an insulating jacket extending along and enclosing the plurality of leads; and at least one internally sealed area within the insulating jacket to prevent fluid leakage along and within the insulating jacket. The invention also provides a method of preventing leakage of a fluid along and through an insulating jacket of a thermocouple including the steps of a) attaching a plurality of lead wires to a thermocouple; b) adding a heat sensitive pseudo-wire to extend along the plurality of lead wires; c) enclosing the lead wires and pseudo-wire inside an insulating jacket; d) locally heating axially spaced portions of the insulating jacket to a temperature which melts the pseudo-wire and fuses it with an interior surface of the jacket.

  15. Creep resistant, precipitation-dispersion-strengthened, martensitic stainless steel and method thereof

    DOEpatents

    Buck, R.F.

    1994-05-10

    An iron-based, corrosion-resistant, precipitation strengthened, martensitic steel essentially free of delta ferrite for use at high temperatures has a nominal composition of 0.05--0.1 C, 8--12 Cr, 1--5 Co, 0.5--2.0 Ni, 0.41--1.0 Mo, 0.1--0.5 Ti, and the balance iron. This steel is different from other corrosion-resistant martensitic steels because its microstructure consists of a uniform dispersion of fine particles, which are very closely spaced, and which do not coarsen at high temperatures. Thus at high temperatures this steel combines the excellent creep strength of dispersion-strengthened steels, with the ease of fabricability afforded by precipitation hardenable steels. 2 figures.

  16. Creep resistant, precipitation-dispersion-strengthened, martensitic stainless steel and method thereof

    DOEpatents

    Buck, Robert F.

    1994-01-01

    An iron-based, corrosion-resistant, precipitation strengthened, martensitic steel essentially free of delta ferrite for use at high temperatures has a nominal composition of 0.05-0.1 C, 8-12 Cr, 1-5 Co, 0.5-2.0 Ni, 0.41-1.0 Mo, 0.1-0.5 Ti, and the balance iron. This steel is different from other corrosion-resistant martensitic steels because its microstructure consists of a uniform dispersion of fine particles, which are very closely spaced, and which do not coarsen at high temperatures. Thus at high temperatures this steel combines the excellent creep strength of dispersion-strengthened steels, with the ease of fabricability afforded by precipitation hardenable steels.

  17. The effects of aerobic exercise and strengthening exercise on pain pressure thresholds.

    PubMed

    Lee, Han Suk

    2014-07-01

    [Purpose] We assessed the effects of aerobic exercise and strengthening exercise on pain pressure thresholds (PPTs) over time. [Subjects and Methods] Fifteen healthy participants were recruited and randomly divided into 3 groups: aerobic exercise, strengthening exercise, and control. The subjects in the aerobic group walked on a treadmill for 40 min at 6.5 km/h. The subjects in the strength group performed circuit training that included bench press, lat pull down, biceps curl, triceps extension, and shoulder press based on the perceived exertion for 40 min. The subjects in the control group rested without any exercise in a quiet room for 40 min. The PPTs of 5 potential muscle trigger points before exercise, and immediately after 10 and 40 min of exercise or rest were measured using an electronic algometer (JTECH Medical, USA). The Friedman's, Kruskal-Wallis, and Mann-Whitney tests were performed using SPSS 18.0 (IBM, Korea). [Results] The PPTs of all subjects decreased after 10 min of exercise, but the difference was not statistically significant. The PPTs of the control group decreased after 40 min. Furthermore, the PPTs of 3 muscles increased after 40 min of aerobic exercise and of 6 muscles after 40 min of strengthening exercise. No significant difference in PPTs was noted among the groups. [Conclusion] The results show that 40 min is a more appropriate exercise time, although the efficacy of controlling pain did not differ between strengthening exercise and aerobic exercise.

  18. Strengthening Parent-Child Relationships through Co-Playing Video Games

    ERIC Educational Resources Information Center

    Sheffield, Anneliese; Lin, Lin

    2013-01-01

    Parent-child relationships may be strengthened when parents and children play video games together. Literature is limited in addressing the impact of co-playing video games on parent-child relationships. Family systems theory, in particular, parental mediation through co-play, may provide insights into parent-child relationships. Parents who…

  19. Feasibility of health systems strengthening in South Sudan: a qualitative study of international practitioner perspectives

    PubMed Central

    Jones, Abigail; Legido-Quigley, Helena

    2015-01-01

    Objective To explore the feasibility of health systems strengthening from the perspective of international healthcare implementers and donors in South Sudan. Design A qualitative interview study, with thematic analysis using the WHO health system building blocks framework. Setting South Sudan. Participants 17 health system practitioners, working for international agencies in South Sudan, were purposively sampled for their knowledge and experiences of health systems strengthening, services delivery, health policy and politics in South Sudan. Results Participants universally reported the health workforce as insufficient and of low capacity and service delivery as poor, while access to medicines was restricted by governmental lack of commitment in undertaking procurement and supply. However, progress was clear in improved county health department governance, health management information system functionality, increased health worker salary harmonisation and strengthened financial management. Conclusions Resurgent conflict and political tensions have negatively impacted all health system components and maintaining or continuing health system strengthening has become extremely challenging. A coordinated approach to balancing humanitarian need particularly in conflict-affected areas, with longer term development is required so as not to lose improvements gained. PMID:26700280

  20. Method and apparatus for packaging optical fiber sensors for harsh environments

    DOEpatents

    Pickrell, Gary; Duan, Yuhong; Wang, Anbo

    2005-08-09

    A package for an optical fiber sensor having a metal jacket surrounding the sensor, and heat-shrink tubing surrounding the metal jacket. The metal jacket is made of a low melting point metal (e.g. lead, tin). The sensor can be disposed in a rigid tube (e.g. stainless steel or glass) that is surrounded by the metal jacket. The metal jacket provides a hermetic, or nearly hermetic seal for the sensor. The package is made by melting the metal jacket and heating the heat shrink tubing at the same time. As the heat-shrink tubing shrinks, it presses the low melting point metal against the sensor, and squeezes out the excess metal.

  1. Finite element modeling of concrete structures strengthened with FRP laminates

    DOT National Transportation Integrated Search

    2001-05-01

    Linear and non-linear method models were developed for a reinforced concrete bridge that had been strengthened with fiber reinforced polymer (FRP) composites. ANSYS and SAP2000 modeling software were used; however, most of the development effort used...

  2. Integrated Approach to Repair and Seismic Strengthening of Mustafa Pasha Mosque in Skopje

    NASA Astrophysics Data System (ADS)

    Sendova, Veronika; Gavrilovic, Predrag; Stojanoski, Blagojce

    2008-07-01

    Mustafa Pasha's Mosque is one of the biggest and the best preserved monuments of the Ottoman sacral architecture in Skopje and the Balkan. As a cultural historic monument of an extraordinary importance for the city of Skopje and Republic of Macedonia, it is under protection of the Law on Protection of Cultural Heritage. IZIIS is currently elaborating a project on repair and strengthening of Mustafa Pasha's mosque. Respecting the modern requirements in protection of historical monuments, as is the main principles of seismic strengthening are: application of new technologies and materials, reversibility and invisibility of the applied technique. The concept of structural strengthening and repair aimed at reaching the designed level of earthquake protection has been selected based on: (i) investigations of the soil conditions, (ii) investigations of the characteristics of the built-in materials, (iii) investigation of the main dynamic characteristics, as well as (iv) previous experimental investigation of the mosque model.

  3. Integrated Approach to Repair and Seismic Strengthening of Mustafa Pasha Mosque in Skopje

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sendova, Veronika; Gavrilovic, Predrag; Stojanoski, Blagojce

    2008-07-08

    Mustafa Pasha's Mosque is one of the biggest and the best preserved monuments of the Ottoman sacral architecture in Skopje and the Balkan. As a cultural historic monument of an extraordinary importance for the city of Skopje and Republic of Macedonia, it is under protection of the Law on Protection of Cultural Heritage. IZIIS is currently elaborating a project on repair and strengthening of Mustafa Pasha's mosque. Respecting the modern requirements in protection of historical monuments, as is the main principles of seismic strengthening are: application of new technologies and materials, reversibility and invisibility of the applied technique. The conceptmore » of structural strengthening and repair aimed at reaching the designed level of earthquake protection has been selected based on: (i) investigations of the soil conditions, (ii) investigations of the characteristics of the built-in materials, (iii) investigation of the main dynamic characteristics, as well as (iv) previous experimental investigation of the mosque model.« less

  4. Practice and Cognition to Strengthen College Students' Moral Education

    ERIC Educational Resources Information Center

    Ren, Wanbin

    2009-01-01

    College students' ideological morality always is the hotspot concerned by various circles of the society, and to strengthen and improve the ideological and moral education in colleges, continually enhance the pertinence and actual effect of the moral education, help college students to dissolve their worldly confusion in moral culture, further…

  5. Cleaning of a copper matte smelting slag from a water-jacket furnace by direct reduction of heavy metals.

    PubMed

    Maweja, Kasonde; Mukongo, Tshikele; Mutombo, Ilunga

    2009-05-30

    Cleaning experiments of a copper matte smelting slag from the water-jacket furnace was undertaken by direct reduction in a laboratory-scale electric furnace. The effects of coal-to-slag ratio, w, and the reduction time, t, were considered for two different coal/slag mixing procedures. In the first procedure, metallurgical coal was added to the molten slag, whereas in the second procedure, coal was premixed with the solid slag before charging into the furnace. The recovery of heavy metals (Cu, Co), and the fuming of Pb and Zn were investigated. Contamination of the metal phase by iron and the acidity index of the final slag were analysed as these may impede the economical viability of the process. The lower w value of 2.56% yielded a recovery rate of less than 60% for copper and less than 50% for cobalt, and around 70% for zinc. However, increasing w to 5% allowed the recovery of 70-90% for Cu, Co and Zn simultaneously after 30-60 min reduction of the molten slag. After reduction, the cleaned slags contained only small amounts of copper and cobalt (<0.4 wt%). Fuming of lead and zinc was efficient as the %Pb of the residual slag dropped to levels lower than 0.04% after 30 min of reduction. Ninety percent of the lead was removed from the initial slag and collected in the dusts. The zinc content of the cleaned slags quickly dropped to between 1 and 3 wt% from the initial 8.2% after 30 min reduction for w value of 5 and after 60 min reduction for w value of 2.56. The dusts contained about 60% Zn and 10% Pb. Recovery of lead from fuming of the slag was higher than 90% in all the experimental conditions considered in this study.

  6. Are flexibility and muscle-strengthening activities associated with a higher risk of developing low back pain?

    PubMed Central

    Sandler, Robert D.; Sui, Xuemei; Church, Timothy S.; Fritz, Stacy L.; Beattie, Paul F.; Blair, Steven N.

    2013-01-01

    Objective To examine the association between participation in flexibility or muscle-strengthening activities with the development of low back pain (LBP). Design Observational cohort study. Methods The cohort included 4,610 adults, 17% female, between 20 and 81 years of age (mean 46.6, s.d. 4.96). The cohort was followed for a mean of 4.9 years for self-reported LBP. All participants reported at baseline whether they performed flexibility or muscle-strengthening activities, including specific sub-types. Results Neither general performance of flexibility or muscle-strengthening activities were associated with a higher incidence of LBP compared to those who did not perform these activities. Those who reported stretching, as a specific flexibility activity were at a higher risk of developing LBP compared with those who performed no flexibility exercises, reported calisthenic flexibility activities, or attended exercise classes. Those who reported using weight training machines, as part of muscle-strengthening activities, had a higher risk of reporting LBP, compared with those who did not perform muscle-strengthening activities or performed calisthenic or free weight activities. Conclusion In this sample, stretching or use of weight training machines is associated with increased risk of developing LBP compared to use of free weights, calisthenics or flexibility classes. PMID:23988784

  7. Improved recombinant Api m 1- and Ves v 5-based IgE testing to dissect bee and yellow jacket allergy and their correlation with the severity of the sting reaction.

    PubMed

    Šelb, J; Kogovšek, R; Šilar, M; Košnik, M; Korošec, P

    2016-04-01

    No study has assessed the diagnostic sensitivity of rApi m 1 and rVes v 5 on Immulite testing system. To compare the diagnostic sensitivity of commercially available venom recombinant allergens between the currently available immunoassays [ImmunoCAP (CAP) and Immulite (LITE)] and establish their correlation with the severity of the sting reaction. This study evaluated 95 bee venom and 110 yellow jacket venom-allergic subjects. We measured the levels of sIgE to rApi m 1, rVes v 5 (LITE and CAP), rApi m 2 (LITE), rVes v 1 (CAP) and total IgE (CAP). Forty-nine healthy subjects served as controls. The diagnostic sensitivity of rApi m 1 and rVes v 5 was significantly higher with the LITE than with the CAP system (71% vs. 88% and 82% vs. 93%). The specificity of both assays for both allergens was between 94% and 98%. Twenty-nine patients that tested negative for rApi m 1 or rVes v 5 with CAP were positive with LITE, but none of the patients that tested negative with LITE were positive with CAP. The positive values of rApi m 1 and rVes v 5 were on average 2.7 and 2.3 times higher, with the LITE than with the CAP system. The combination of rApi m 1 and rApi m 2 (LITE) and the combination of rVes v 5 (LITE) and rVes v 1 (CAP) almost matched the sensitivity of native venoms (95% and 97%, respectively), whereas the diagnostic sensitivity of the combination of rVes v 5 and rVes v 1 (CAP) did not reach the sensitivity of rVes v 5 (LITE) alone (90% vs. 93%). IgE levels to venom recombinants and total IgE did not correlate with the severity of sting reaction. The use of rApi m 1 and rVes v 5 with the LITE system significantly enhanced diagnostic utility of venom recombinants and should improve the dissection of bee and yellow jacket venom allergy. © 2015 John Wiley & Sons Ltd.

  8. Effect of eccentric strengthening on pain, muscle strength, endurance, and functional fitness factors in male patients with achilles tendinopathy.

    PubMed

    Yu, JaeHo; Park, DaeSung; Lee, GyuChang

    2013-01-01

    The aim of this study was to investigate the effect of eccentric strengthening on pain, muscle strength, endurance, and functional fitness factors in Achilles tendinopathy patients. Thirty-two male patients with Achilles tendinopathy were assigned to either the experimental group that performed eccentric strengthening or the control group that performed concentric strengthening (n = 16, both groups) for 8 wks (50 mins per day, three times per week). A visual analog scale, an isokinetic muscle testing equipment, the side-step test, and the Sargent jump test were used to assess pain, muscle strength, endurance, and functional fitness factors before and after the intervention. In comparison with the control group, the experimental group showed significant improvement in pain, ankle dorsiflexion endurance, total balance index, and agility after the intervention (P < 0.05). However, there was no significant difference in dexterity between the two groups. Eccentric strengthening was more effective than concentric strengthening in reducing pain and improving function in patients with Achilles tendinopathy; therefore, regular eccentric strengthening is important for patients in a clinical setting.

  9. Strengthening of reinforced concrete beams with basalt-based FRP sheets: An analytical assessment

    NASA Astrophysics Data System (ADS)

    Nerilli, Francesca; Vairo, Giuseppe

    2016-06-01

    In this paper the effectiveness of the flexural strengthening of RC beams through basalt fiber-reinforced sheets is investigated. The non-linear flexural response of RC beams strengthened with FRP composites applied at the traction side is described via an analytical formulation. Validation results and some comparative analyses confirm soundness and consistency of the proposed approach, and highlight the good mechanical performances (in terms of strength and ductility enhancement of the beam) produced by basalt-based reinforcements in comparison with traditional glass or carbon FRPs.

  10. Strengthening of reinforced concrete beams with basalt-based FRP sheets: An analytical assessment

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Nerilli, Francesca; Vairo, Giuseppe

    2016-06-08

    In this paper the effectiveness of the flexural strengthening of RC beams through basalt fiber-reinforced sheets is investigated. The non-linear flexural response of RC beams strengthened with FRP composites applied at the traction side is described via an analytical formulation. Validation results and some comparative analyses confirm soundness and consistency of the proposed approach, and highlight the good mechanical performances (in terms of strength and ductility enhancement of the beam) produced by basalt-based reinforcements in comparison with traditional glass or carbon FRPs.

  11. The Evolution of World Health Organization's Initiatives for the Strengthening of Nursing and Midwifery.

    PubMed

    Ventura, Carla Aparecida Arena; Mendes, Isabel Amélia Costa; Fumincelli, Laís; Trevizan, Maria Auxiliadora

    2015-09-01

    To describe the evolution in the resolutions approved by World Health Organization (WHO)'s World Health Assembly (WHA) to strengthen nursing and midwifery. Qualitative and descriptive study, undertaken through a search of resolutions presented by WHA, on the WHO website, regarding the theme "strengthening of nursing and midwifery." The resolutions on the theme "nursing and midwifery" were included, whose titles were available and whose full texts were accessed, excluding those on general health themes. The key words used were resolutions, strengthening, and nursing and midwifery. Among the 20 resolutions found, 12 were selected, adopted between 1948 and 2013, in accordance with the study inclusion criteria. The data were interpreted using thematic qualitative analysis, identifying and grouping the data in categories related to the study theme. Based on the content analysis of the 12 resolutions studied, three thematic categories were defined: "nursing and midwifery in primary health"; "role of nursing and midwifery in health for all"; and "nurses and midwives' professional training." Based on the categories, the evolution in the strengthening of nursing and midwifery was demonstrated through the initiatives and resolutions approved by WHA, highlighting the importance of nurses and midwives as multiprofessional health team members and their fundamental role in the improvements of the health system. Therefore, in accordance with the needs of each country, the member states can implement strategies presented by the WHA resolutions to strengthen nursing and midwifery services. This study has relevance for the development of health policies considering the relevant contributions of nurses and midwives to healthcare systems and services, based on the analysis of WHO resolutions involving these professions. © 2015 Sigma Theta Tau International.

  12. To Strengthen Quality in Higher Education. Summary Recommendations of the National Commission on Higher Education Issues.

    ERIC Educational Resources Information Center

    National Commission in Higher Education Issues, Washington, DC.

    Recommendations for improving educational quality and strengthening public confidence in American higher education are offered, based on the deliberations of the National Commission on Higher Education, which existed for 1 year and held four meetings. Areas of concern include: setting priorities for the institution and strengthening administrative…

  13. Comparative study of hamstring and quadriceps strengthening treatments in the management of knee osteoarthritis.

    PubMed

    Al-Johani, Ahmed H; Kachanathu, Shaji John; Ramadan Hafez, Ashraf; Al-Ahaideb, Abdulaziz; Algarni, Abdulrahman D; Meshari Alroumi, Abdulmohesn; Alanezi, Aqeel M

    2014-06-01

    [Purpose] Osteoarthritis (OA) of the knee is the most common form of joint disease. It is one of the major causes of impaired function that reduces quality of life (QOL) worldwide. The purpose of this study was to compare exercise treatments for hamstring and quadriceps strength in the management of knee osteoarthritis. [Subjects and Methods] Forty patients with OA knee, aged 50-65 years were divided into 2 groups. The first group (57.65±4.78 years) received hot packs and performed strengthening exercises for the quadriceps and hamstring, and stretching exercises for the hamstring. The second group (58.15±5.11 years) received hot packs and performed strengthening exercises for only the quadriceps, and stretching exercise for the hamstring. Outcome measures were the WOMAC (Western Ontario and McMaster Universities OA index questionnaire), Visual Analogue Scale (VAS) assessment of pain, the Fifty-Foot Walk Test (FWS), and Handheld dynamometry. [Results] There was a significant difference between the groups. The first group showed a more significant result than the second group. [Conclusion] Strengthening of the hamstrings in addition to strengthening of the quadriceps was shown to be beneficial for improving subjective knee pain, range of motion and decreasing the limitation of functional performance of patients with knee osteoarthritis.

  14. Request for Support: A Tool for Strengthening Network Capacity

    ERIC Educational Resources Information Center

    Bain, Jamie; Harden, Noelle; Heim, Stephanie

    2017-01-01

    A request for support (RFS) is a tool that is used to strengthen network capacity by prioritizing needs and optimizing learning opportunities. Within University of Minnesota Extension, we implemented an RFS process through an online survey designed to help leaders of food networks identify and rank learning and capacity-building needs and indicate…

  15. Strengthening of Existing Bridge Structures for Shear and Bending with Carbon Textile-Reinforced Mortar.

    PubMed

    Herbrand, Martin; Adam, Viviane; Classen, Martin; Kueres, Dominik; Hegger, Josef

    2017-09-19

    Increasing traffic loads and changes in code provisions lead to deficits in shear and flexural capacity of many existing highway bridges. Therefore, a large number of structures are expected to require refurbishment and strengthening in the future. This projection is based on the current condition of many older road bridges. Different strengthening methods for bridges exist to extend their service life, all having specific advantages and disadvantages. By applying a thin layer of carbon textile-reinforced mortar (CTRM) to bridge deck slabs and the webs of pre-stressed concrete bridges, the fatigue and ultimate strength of these members can be increased significantly. The CTRM layer is a combination of a corrosion resistant carbon fiber reinforced polymer (CFRP) fabric and an efficient mortar. In this paper, the strengthening method and the experimental results obtained at RWTH Aachen University are presented.

  16. Strengthening of Existing Bridge Structures for Shear and Bending with Carbon Textile-Reinforced Mortar

    PubMed Central

    Herbrand, Martin; Classen, Martin; Kueres, Dominik; Hegger, Josef

    2017-01-01

    Increasing traffic loads and changes in code provisions lead to deficits in shear and flexural capacity of many existing highway bridges. Therefore, a large number of structures are expected to require refurbishment and strengthening in the future. This projection is based on the current condition of many older road bridges. Different strengthening methods for bridges exist to extend their service life, all having specific advantages and disadvantages. By applying a thin layer of carbon textile-reinforced mortar (CTRM) to bridge deck slabs and the webs of pre-stressed concrete bridges, the fatigue and ultimate strength of these members can be increased significantly. The CTRM layer is a combination of a corrosion resistant carbon fiber reinforced polymer (CFRP) fabric and an efficient mortar. In this paper, the strengthening method and the experimental results obtained at RWTH Aachen University are presented. PMID:28925962

  17. Upper Limb Isokinetic Strengthening Versus Passive Mobilization in Patients With Chronic Stroke: A Randomized Controlled Trial.

    PubMed

    Coroian, Flavia; Jourdan, Claire; Bakhti, Karima; Palayer, Claire; Jaussent, Audrey; Picot, Marie-Christine; Mottet, Denis; Julia, Marc; Bonnin, Huey-Yune; Laffont, Isabelle

    2018-02-01

    To assess the benefit of isokinetic strengthening of the upper limb (UL) in patients with chronic stroke as compared to passive mobilization. Randomized blinded assessor controlled trial. Physical Medicine and Rehabilitation departments of 2 university hospitals. Patients (N=20) with incomplete hemiplegia (16 men; mean age, 64y; median time since stroke, 32mo). A 6-week comprehensive rehabilitation program, 3d/wk, 3 sessions/d. In addition, a 45-minute session per day was performed using an isokinetic dynamometer, with either isokinetic strengthening of elbow and wrist flexors/extensors (isokinetic strengthening group) or passive joint mobilization (control group). The primary endpoint was the increase in Upper Limb Fugl-Meyer Assessment (UL-FMA) score at day 45 (t1). Secondary endpoints were increases in UL-FMA scores, Box and Block Test scores, muscle strength, spasticity, and Barthel Index at t1, t2 (3mo), and t3 (6mo). Recruitment was stopped early because of excessive fatigue in the isokinetic strengthening group. The increase in UL-FMA score at t1 was 3.5±4.4 in the isokinetic strengthening group versus 6.0±4.5 in the control group (P=.2). Gains in distal UL-FMA scores were larger (3.1±2.8) in the control group versus 0.6±2.5 in the isokinetic strengthening group (P=.05). No significant group difference was observed in secondary endpoints. Mixed models confirmed those results. Regarding the whole sample, gains from baseline were significant for the UL-FMA at t1 (+4.8; P<.001), t2, and t3 and for the Box and Block Test at t1 (+3; P=.013) and t2. In a comprehensive rehabilitation program, isokinetic strengthening did not show superiority to passive mobilization for UL rehabilitation. Findings also suggest a sustained benefit in impairments and function of late UL rehabilitation programs for patients with stroke. Copyright © 2017 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  18. Efficacy of core muscle strengthening exercise in chronic low back pain patients.

    PubMed

    Kumar, Tarun; Kumar, Suraj; Nezamuddin, Md; Sharma, V P

    2015-01-01

    Low back pain is a common health problem in human being and about 5 to 15% will develop chronic low back pain (CLBP). The clinical findings of CLBP suggest that lumbar mobility is decreased and recruitment order of core muscles is altered. In literature, there is no data about the effect of core muscles strengthening in the chronicity (short duration, long duration) of CLBP. This study evaluated the effect of core muscle strengthening intervention on chronicity of chronic low back pain. Thirty patients were recruited from the outpatient department of the National Institute for the Orthopaedically Handicapped. These 30 patients divided into two groups: A and B on the basis of duration of low back pain. Group-A patients complain about pain duration for more than twelve months and Group B complains about pain duration from three to twelve months. Both the groups were received same intervention for six weeks. Assessment was done pre intervention and post intervention after six weeks for both the groups. %For both the groups the assessment was done after six weeks for pre and post intervention. The result described both the groups showed improvement in all the outcome measures including pain as well as in function using Numerical pain rating scale, Oswestry Disability Index, Sorensen test, Gluteus Maximus Strength, Activation of transversus abdominis and Modified-Modified Schober's Test. The improvement was statistically non-significant with inter groups and significant within group. This study concludes that core muscle strengthening exercise along with lumbar flexibility and gluteus maximus strengthening is an effective rehabilitation technique for all chronic low back pain patients irrespective of duration (less than one year and more than one year) of their pain.

  19. Long term effect of selective muscle strengthening in athletes with patellofemoral pain syndrome.

    PubMed

    Ramazzina, Ileana; Pogliacomi, Francesco; Bertuletti, Silvia; Costantino, Cosimo

    2016-04-15

    The purpose of the study was to examine the long term effects of a selective muscle strengthening program in reducing pain and improving knee function and strength in athletes with Patellofemoral Pain Syndrome. A total of one hundred and thirty four athletes were enrolled in the study. All patients were evaluated with Isokinetic Test, Cincinnati Knee Rating System and Visual Analogue Scale. The selective muscle strengthening consisted of 8 weeks of exercises performed 3 times in the first 4 weeks and twice in the last 4 weeks. The muscle strengthening program was performed between 30-90° of knee flexion. During the first 4-weeks treatment we used closed kinetic chain exercises with 3 sets of 8 repetitions at 80% of maximum load. In the last 4-weeks we added open kinetic chain exercises at 70% of maximum load with 3 sets and 10 repetitions to improve the resistance. Analyzing data at the beginning and at the end of the treatment for Isokinetic test, Cincinnati and Visual Analogue Scale we observed a significant scores improvement. At 1 year follow-up the clinical improvements were maintained and everyone followed the recommended program because did not perform the maintenance program. At 2 years follow-up no athletes presented relapses; only four patients were excluded from program. We believe that our program of selective muscle strengthening should resolve pain and improve knee function and strength as results in obtained scores and could be critical to avoid painful relapses.

  20. Sleep Strengthens but does Not Reorganize Memory Traces in a Verbal Creativity Task.

    PubMed

    Landmann, Nina; Kuhn, Marion; Maier, Jonathan-Gabriel; Feige, Bernd; Spiegelhalder, Kai; Riemann, Dieter; Nissen, Christoph

    2016-03-01

    Sleep after learning promotes the quantitative strengthening of new memories. Less is known about the impact of sleep on the qualitative reorganization of memory content. This study tested the hypothesis that sleep facilitates both memory strengthening and reorganization as indexed by a verbal creativity task. Sixty healthy university students (30 female, 30 male, 20-30 years) were investigated in a randomized, controlled parallel-group study with three experimental groups (sleep, sleep deprivation, daytime wakefulness). At baseline, 60 items of the Compound Remote Associate (CRA) task were presented. At retest after the experimental conditions, the same items were presented again together with 20 new control items to disentangle off-line incubation from online performance effects. Sleep significantly strengthened formerly encoded memories in comparison to both wake conditions (improvement in speed of correctly resolved items). Offline reorganization was not enhanced following sleep, but was enhanced following sleep-deprivation in comparison to sleep and daytime wakefulness (solution time of previously incubated, newly solved items). Online performance did not differ between the groups (solution time of new control items). The results support the notion that sleep promotes the strengthening, but not the reorganization, of newly encoded memory traces in a verbal creativity task. Future studies are needed to further determine the impact of sleep on different types of memory reorganization, such as associative thinking, creativity and emotional memory processing, and potential clinical translations, such as the augmentation of psychotherapy through sleep interventions. © 2016 Associated Professional Sleep Societies, LLC.

  1. Strong Motion Instrumentation of Seismically-Strengthened Port Structures in California by CSMIP

    USGS Publications Warehouse

    Huang, M.J.; Shakal, A.F.

    2009-01-01

    The California Strong Motion Instrumentation Program (CSMIP) has instrumented five port structures. Instrumentation of two more port structures is underway and another one is in planning. Two of the port structures have been seismically strengthened. The primary goals of the strong motion instrumentation are to obtain strong earthquake shaking data for verifying seismic analysis procedures and strengthening schemes, and for post-earthquake evaluations of port structures. The wharves instrumented by CSMIP were recommended by the Strong Motion Instrumentation Advisory Committee, a committee of the California Seismic Safety Commission. Extensive instrumentation of a wharf is difficult and would be impossible without the cooperation of the owners and the involvement of the design engineers. The instrumentation plan for a wharf is developed through study of the retrofit plans of the wharf, and the strong-motion sensors are installed at locations where specific instrumentation objectives can be achieved and access is possible. Some sensor locations have to be planned during design; otherwise they are not possible to install after construction. This paper summarizes the two seismically-strengthened wharves and discusses the instrumentation schemes and objectives. ?? 2009 ASCE.

  2. Seriously Implementing Health Capacity Strengthening Programs in Africa: Comment on "Implementation of a Health Management Mentoring Program: Year-1 Evaluation of Its Impact on Health System Strengthening in Zambézia Province, Mozambique".

    PubMed

    Lapão, Luís Velez

    2015-07-14

    Faced with the challenges of healthcare reform, skills and new capabilities are needed to support the reform and it is of crucial importance in Africa where shortages affects the health system resilience. Edwards et al provides a good example of the challenge of implementing a mentoring program in one province in a sub-Saharan country. From this example, various aspects of strengthening the capacity of managers in healthcare are examined based on our experience in action-training in Africa, as mentoring shares many characteristics with action-training. What practical lessons can be drawn to promote the strengthening so that managers can better intervene in complex contexts? Deeper involvement of health authorities and more rigorous approaches are seriously desirable for the proper development of health capacity strengthening programs in Africa. © 2015 by Kerman University of Medical Sciences.

  3. Thermomechanical responses of concrete members strengthened with cfrp sheets

    NASA Astrophysics Data System (ADS)

    Alqurashi, Abdulaziz

    Strengthening structural members means to be able to carry additional loads. Since, 1990s, a lot of materials and techniques have been established to not only increasing the capacity of member but also facing deterioration. Deterioration has become one of the worst highly maintenance cost. According to The ASCE, 27.1% of all bridges in the United States are not effectual. This is because the high traffic reflects negatively to structural members and cause deterioration of these members. This problem has been cost a lot of money. In addition, FRP has approved that it can increase the capacity of member and overcome some disadvantages such as deterioration. Therefore, CFRP sheet has become widely used. However, high temperatures affect the performance of externally bonded CFRP sheet negatively. Investigation should be carried out on relaxation and flexural performance of members under different temperatures. Therefore, this thesis focus on analyzing and investigating the performance of strengthened members exposed to elevated temperatures (25 to 175 °C). The experimental program was divided to two main parts. First, 144 strengthen concrete blocks 100mm X 150mm X 75mm has been exposed to elevated temperatures. These blocks have two main categories, which are different CFRP sheet width, and different CFRP sheet length. Different CFRP width has three types, which are type 0.25B (25mm x 100mm), type 0.5B (50mm x 100mm) and type 0.75B (75mm x 100mm). Also, Different CFRP length has three types, which are type L e (bonded area of 50 mm by 90mm), 1.25 Le (area of 50mm by 125mm) and type 1.5Le (50mm by 137 mm). Second, studying the performance of RC beams exposed to elevated temperatures.

  4. Repeated Labilization-Reconsolidation Processes Strengthen Declarative Memory in Humans

    PubMed Central

    Forcato, Cecilia; Rodríguez, María L. C.; Pedreira, María E.

    2011-01-01

    The idea that memories are immutable after consolidation has been challenged. Several reports have shown that after the presentation of a specific reminder, reactivated old memories become labile and again susceptible to amnesic agents. Such vulnerability diminishes with the progress of time and implies a re-stabilization phase, usually referred to as reconsolidation. To date, the main findings describe the mechanisms associated with the labilization-reconsolidation process, but little is known about its functionality from a biological standpoint. Indeed, two functions have been proposed. One suggests that destabilization of the original memory after the reminder allows the integration of new information into the background of the original memory (memory updating), and the other suggests that the labilization-reconsolidation process strengthens the original memory (memory strengthening). We have previously reported the reconsolidation of human declarative memories, demonstrating memory updating in the framework of reconsolidation. Here we deal with the strengthening function attributed to the reconsolidation process. We triggered labilization-reconsolidation processes successively by repeated presentations of the proper reminder. Participants learned an association between five cue-syllables and their respective response-syllables. Twenty-four hours later, the paired-associate verbal memory was labilized by exposing the subjects to one, two or four reminders. The List-memory was evaluated on Day 3 showing that the memory was improved when at least a second reminder was presented in the time window of the first labilization-reconsolidation process prompted by the earlier reminder. However, the improvement effect was revealed on Day 3, only when at least two reminders were presented on Day2 and not as a consequence of only retrieval. Therefore, we propose central concepts for the reconsolidation process, emphasizing its biological role and the parametrical constrains

  5. Oxide dispersion strengthened ferritic steels: a basic research joint program in France

    NASA Astrophysics Data System (ADS)

    Boutard, J.-L.; Badjeck, V.; Barguet, L.; Barouh, C.; Bhattacharya, A.; Colignon, Y.; Hatzoglou, C.; Loyer-Prost, M.; Rouffié, A. L.; Sallez, N.; Salmon-Legagneur, H.; Schuler, T.

    2014-12-01

    AREVA, CEA, CNRS, EDF and Mécachrome are funding a joint program of basic research on Oxide Dispersion Strengthened Steels (ODISSEE), in support to the development of oxide dispersion strengthened 9-14% Cr ferritic-martensitic steels for the fuel element cladding of future Sodium-cooled fast neutron reactors. The selected objectives and the results obtained so far will be presented concerning (i) physical-chemical characterisation of the nano-clusters as a function of ball-milling process, metallurgical conditions and irradiation, (ii) meso-scale understanding of failure mechanisms under dynamic loading and creep, and, (iii) kinetic modelling of nano-clusters nucleation and α/α‧ unmixing.

  6. Strengthening At-Risk and Homeless Young Mothers and Children

    ERIC Educational Resources Information Center

    Medeiros, Debra; Vaulton, Wendy

    2010-01-01

    The Strengthening At Risk and Homeless Young Mothers and Children Initiative, funded by the Conrad N. Hilton Foundation, aims to improve the housing, health, and development of homeless and at-risk young families. This article describes the services provided in four program sites (Pomona, CA; Antelope Valley, CA; Minneapolis, MN; and Chicago, IL)…

  7. Strengthening Humanistic Perspectives across the Curriculum: A Project [Report].

    ERIC Educational Resources Information Center

    To-Dutka, Julia; Spencer, Sharon

    Montclair (New Jersey) State College sought to develop a structure that would facilitate the strengthening of humanistic perspectives in its students and would enable students to see the connections between their academic studies and the complex aspects of the meaning of being human in a world that is increasingly fragmented. Six pairs of faculty…

  8. Evaluative Thinking: Using Results-Oriented Reasoning to Strengthen Collaboration

    ERIC Educational Resources Information Center

    Malloy, Courtney L.; Lee, Janet S.; Cawthon, Stephanie W.

    2016-01-01

    In today's world, much of what used to be individual work has become collaborative. Moreover, complex change initiatives often require individuals within and across organizations to team up to set and achieve meaningful goals. The role of researchers and evaluators is to offer support that can be used to strengthen the work of organizations and…

  9. Strengthening Family Practices for Latino Families.

    PubMed

    Chartier, Karen G; Negroni, Lirio K; Hesselbrock, Michie N

    2010-01-01

    The study examined the effectiveness of a culturally-adapted Strengthening Families Program (SFP) for Latinos to reduce risks for alcohol and drug use in children. Latino families, predominantly Puerto Rican, with a 9-12 year old child and a parent(s) with a substance abuse problem participated in the study. Pre- and post-tests were conducted with each family. Parental stress, parent-child dysfunctional relations, and child behavior problems were reduced in the families receiving the intervention; family hardiness and family attachment were improved. Findings contribute to the validation of the SFP with Latinos, and can be used to inform social work practice with Puerto Rican families.

  10. Strengthening health promotion in Australian workplaces.

    PubMed

    Fisher, K J; Deeds, S; Siebel, R; Allen, J

    1997-01-01

    The Australian workplace has emerged as an important venue for influencing the health of employees through regulations and behaviour change programs. Recent surveys have highlighted a growth in this activity but the effectiveness of these programs in changing unhealthy work practices and policies is questionable. The need for strengthening programs by stronger designs and evaluation, and addressing organisational factors and employee participation in planning and implementation processes is documented. Efforts in that direction in Queensland are cited, Building on these existing foundations, redirecting existing resources, and building intersectoral cooperation in public-private partnerships hold a creative, exemplary vision of the future for Australian workplace programming.

  11. Strengthening the Role of Nurses in Medical Device Development.

    PubMed

    Castner, Jessica; Sullivan, Suzanne S; Titus, Albert H; Klingman, Karen J

    2016-01-01

    Medical devices and innovative technology promise to revolutionize health care. Despite the importance of involving nurses in the collaborative medical device development processes, there are few learning opportunities in nursing programs. The purpose of this article is to provide a conceptual guide for nurse educators and researchers to engage nursing expertise in medical device development processes. A review of the literature guided the creation of the "Strengthening the Role of Nurses in Medical Device Development Roadmap" model. The model was used to describe how nurses can be engaged in multidisciplinary design of medical devices. An academic transdisciplinary team piloted the application of the model. The model includes the stages of needs assessment, planned brainstorm, feasibility determination, concept design, and prototype building. A transdisciplinary team case study of improving an asthma home-monitoring devices illustrates effective application of the model. Nurse leaders in the academic setting can effectively use the "Strengthening the Role of Nurses in Medical Device Development Roadmap" to inform their engagement of nurses in early medical device development and innovation processes. Copyright © 2016 Elsevier Inc. All rights reserved.

  12. [Effect of the sharply strengthened motor activity on heart pumping ability of rats and mechanisms of its regulation].

    PubMed

    Nikitin, A S; Abzalov, R A; Abzalov, N I; Vafina, E Z

    2013-08-01

    The indicators of heart pumping ability of rats at a muscular loading of the maximum power and also in the conditions of transition from sharply strengthened motor activity regime on a strengthened motor activity regime at adrenergic influence stimulation and blockade were investigated. At rats of 100-daily age at the strengthened motor activity heart rate is less, and blood stroke volume is more, than in the rats, subject to muscular loading of the maximum power. The adrenergic influence on the heart's pumping ability of sharply strengthened motor activity rats is much more, than of unlimited motor activity rats. At the α1-adrenoreceptors blockade at 100-daily rats the decreasing in intensity of muscular loading causes increased in adrenergic influence on heart pumping ability.

  13. Case study of flexure and shear strengthening of RC beams by CFRP using FEA

    NASA Astrophysics Data System (ADS)

    Jankowiak, Iwona

    2018-01-01

    In the paper the preliminary results of study on strengthening RC beams by means of CFRP materials under mixed shear-flexural work condition are presented. The Finite Element Method analyses were performed using numerical models proposed and verified earlier by the results of laboratory tests [4, 5] for estimation of effectiveness of CFRP strengthening of RC beams under flexure. The currently conducted analyses deal with 3D models of RC beams under mixed shear-flexural loading conditions. The symmetry of analyzed beams was taken into account (in both directions). The application of Concrete Damage Plasticity (CDP) model of RC beam allowed to predict a layout and propagation of cracks leading to failure. Different cases of strengthening were analyzed: with the use of CFRP strip or CFRP closed hoops as well as with the combination of above mentioned. The preliminary study was carried out and the first results were presented.

  14. Using "Learning Stories" to Strengthen Teachers' Relationships with Children

    ERIC Educational Resources Information Center

    Carter, Margie

    2010-01-01

    Ever since discovering the New Zealand (NZ) approach to writing Learning Stories the author has been struck by its value on many different levels. Margaret Carr (2001) and her NZ colleagues created this approach, not only as a way to assess desirable outcomes, but as a means to strengthen practitioners' ability to use documentation as a tool for…

  15. Noninvasive stimulation of prefrontal cortex strengthens existing episodic memories and reduces forgetting in the elderly

    PubMed Central

    Sandrini, Marco; Brambilla, Michela; Manenti, Rosa; Rosini, Sandra; Cohen, Leonardo G.; Cotelli, Maria

    2014-01-01

    Memory consolidation is a dynamic process. Reactivation of consolidated memories by a reminder triggers reconsolidation, a time-limited period during which existing memories can be modified (i.e., weakened or strengthened). Episodic memory refers to our ability to recall specific past events about what happened, including where and when. Difficulties in this form of long-term memory commonly occur in healthy aging. Because episodic memory is critical for daily life functioning, the development of effective interventions to reduce memory loss in elderly individuals is of great importance. Previous studies in young adults showed that the dorsolateral prefrontal cortex (DLPFC) plays a causal role in strengthening of verbal episodic memories through reconsolidation. The aim of the present study was to explore the extent to which facilitatory transcranial direct current stimulation (anodal tDCS) over the left DLPFC would strengthen existing episodic memories through reconsolidation in elderly individuals. On Day 1, older adults learned a list of 20 words. On Day 2 (24 h later), they received a reminder or not, and after 10 min tDCS was applied over the left DLPFC. Memory recall was tested on Day 3 (48 h later) and Day 30 (1 month later). Surprisingly, anodal tDCS over the left DLPFC (i.e., with or without the reminder) strengthened existing verbal episodic memories and reduced forgetting compared to sham stimulation. These results provide a framework for testing the hypothesis that facilitatory tDCS of left DLPFC might strengthen existing episodic memories and reduce memory loss in older adults with amnestic mild cognitive impairment. PMID:25368577

  16. Strengthening Renal Registries and ESRD Research in Africa.

    PubMed

    Davids, M Razeen; Caskey, Fergus J; Young, Taryn; Balbir Singh, Gillian K

    2017-05-01

    In Africa, the combination of noncommunicable diseases, infectious diseases, exposure to environmental toxins, and acute kidney injury related to trauma and childbirth are driving an epidemic of chronic kidney disease and end-stage renal disease (ESRD). Good registry data can inform the planning of renal services and can be used to argue for better resource allocation, audit the delivery and quality of care, and monitor the impact of interventions. Few African countries have established renal registries and most have failed owing to resource constraints. In this article we briefly review the burden of chronic kidney disease and ESRD in Africa, and then consider the research questions that could be addressed by renal registries. We describe examples of the impact of registry data and summarize the sparse primary literature on country-wide renal replacement therapy in African countries over the past 20 years. Finally, we highlight some initiatives and opportunities for strengthening research on ESRD and renal replacement therapy in Africa. These include the establishment of the African Renal Registry and the availability of new areas for research. We also discuss capacity building, collaboration, open-access publication, and the strengthening of local journals, all measures that may improve the quantity, visibility, and impact of African research outputs. Copyright © 2017 Elsevier Inc. All rights reserved.

  17. Strengthening IAEA Safeguards for Research Reactors

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Reid, Bruce D.; Anzelon, George A.; Budlong-Sylvester, Kory

    During their December 10-11, 2013, workshop in Grenoble France, which focused on the history and future of safeguarding research reactors, the United States, France and the United Kingdom (UK) agreed to conduct a joint study exploring ways to strengthen the IAEA’s safeguards approach for declared research reactors. This decision was prompted by concerns about: 1) historical cases of non-compliance involving misuse (including the use of non-nuclear materials for production of neutron generators for weapons) and diversion that were discovered, in many cases, long after the violations took place and as part of broader pattern of undeclared activities in half amore » dozen countries; 2) the fact that, under the Safeguards Criteria, the IAEA inspects some reactors (e.g., those with power levels under 25 MWt) less than once per year; 3) the long-standing precedent of States using heavy water research reactors (HWRR) to produce plutonium for weapons programs; 4) the use of HEU fuel in some research reactors; and 5) various technical characteristics common to some types of research reactors that could provide an opportunity for potential proliferators to misuse the facility or divert material with low probability of detection by the IAEA. In some research reactors it is difficult to detect diversion or undeclared irradiation. In addition, infrastructure associated with research reactors could pose a safeguards challenge. To strengthen the effectiveness of safeguards at the State level, this paper advocates that the IAEA consider ways to focus additional attention and broaden its safeguards toolbox for research reactors. This increase in focus on the research reactors could begin with the recognition that the research reactor (of any size) could be a common path element on a large number of technically plausible pathways that must be considered when performing acquisition pathway analysis (APA) for developing a State Level Approach (SLA) and Annual Implementation Plan

  18. DEFLECTION PRESSURE TESTER

    DOEpatents

    Cooper, C.M.

    1961-01-01

    A method and apparatus for determining whether the jacket of a nuclear- fuel slug has a leak are described. The region of the jacket to be leak-tested is sealed off, and gas under pressure is applied thereto. If there is an imperfection, the gas will enter the jacket and bulge another region of the jacket. The bulge occurring is measured by a gage.

  19. Memory retrieval and the passage of time: from reconsolidation and strengthening to extinction

    PubMed Central

    Inda, Maria Carmen; Muravieva, Elizaveta V.; Alberini, Cristina M.

    2011-01-01

    An established memory can be made transiently labile if retrieved or reactivated. Over time, it becomes again resistant to disruption and this process that renders the memory stable is termed reconsolidation. The reasons why a memory becomes labile after retrieval and reconsolidates still remains debated. Here, using inhibitory avoidance (IA) learning in rats, we provide evidence that retrievals of a young memory, which are accompanied by its reconsolidation, result in memory strengthening and contribute to its overall consolidation. This function associated to reconsolidation is temporally limited. With the passage of time, the stored memory undergoes important changes, as revealed by the behavioral outcomes of its retrieval. Over time, without explicit retrievals, memory first strengthens and becomes refractory to both retrieval-dependent interference and strengthening. At later times, the same retrievals that lead to reconsolidation of a young memory extinguish an older memory. We conclude that the storage of information is very dynamic and that its temporal evolution regulates behavioral outcomes. These results are important for potential clinical applications. PMID:21289172

  20. Strengthening senior tax credit programs in Massachusetts.

    PubMed

    Kiesel, Kristin

    2002-01-01

    In the last decade, property taxes have increased, creating a financial burden on senior homeowners. In Massachusetts, senior property tax credit programs have arisen to address this problem, as well as to provide cost-effective volunteer assistance for municipal departments, offer seniors meaningful work that otherwise would not have been attempted, and foster involvement in municipal government among seniors. The success of the programs in retaining senior homeowners in the community remains to be evaluated. Program specifics are detailed, policy options are considered, and recommendations are made to strengthen existing programs and assist replication.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.