76 FR 31009 - BNSF Railway Company-Trackage Rights Exemption-Yellowstone Valley Railroad, Inc.

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-27

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35503] BNSF Railway Company--Trackage Rights Exemption--Yellowstone Valley Railroad, Inc. Yellowstone Valley Railroad, Inc... local and overhead trackage rights to BNSF Railway Company (BNSF) over a rail line that it leases from...

77 FR 73114 - BNSF Railway Company-Temporary Trackage Rights Exemption-Union Pacific Railroad Company

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-07

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35676 (Sub-No. 1)] BNSF Railway Company--Temporary Trackage Rights Exemption--Union Pacific Railroad Company AGENCY: Surface Transportation Board, DOT. ACTION: Notice, correction. SUMMARY: This document corrects a notice appearing in the...

78 FR 2483 - Ohio Terminal Railway Company-Operation Exemption-Hannibal Real Estate, LLC

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-11

... Railway Company--Operation Exemption--Hannibal Real Estate, LLC Ohio Terminal Railway Company (OTRC),\\1\\ a... near Hannibal, in Monroe County, Ohio (the Line), pursuant to an operating agreement with Hannibal Real Estate, LLC (Hannibal). \\1\\ OTRC is a wholly owned, corporate subsidiary of Carload Express, Inc. (CEI...

77 FR 55898 - Norfolk Southern Railway Company-Abandonment Exemption-in Beaufort County, NC

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-11

...)] Norfolk Southern Railway Company--Abandonment Exemption--in Beaufort County, NC Norfolk Southern Railway Company (NSR) has filed a verified notice of exemption under 49 CFR part 1152 subpart F-Exempt...) underlying the line. It seeks this abandonment at the behest of the ROW owner, PCS Phosphate, which wants to...

Enrichment and Bioavailability of Trace Elements in Soil in Vicinity of Railways in Japan.

PubMed

Wang, Zhen; Watanabe, Izumi; Ozaki, Hirozaku; Zhang, Jianqiang

2018-01-01

This study focuses on the concentrations, distribution, pollution levels, and bioavailability of 12 trace elements in soils along 6 different railways in Japan. Three diesel powered railways and three electricity powered railways were chosen as target. Surface soils (< 3 cm) were collected in vicinity of railways for analysis. Digestion and extraction were performed before concentration and bioavailability analysis. Enrichment factor was applied to investigate contamination levels of selected elements. The mean concentrations of Cr, Co, Ni, Cu, Zn, Sn, and Pb in soil samples were higher than soil background value in Japan. Concentrations of trace elements in soils along different railway had different characteristics. Horizontal distribution of Cu, Zn, Cd, Sn, and Pb in soil samples showed obviously downtrend with distance along railways with high frequency. Concentrations of V, Mn, Fe, and Co were higher in soils along railways which pass through city center. According to principal component analysis and cluster analysis, concentrations of Cu, Zn, Sn, and Pb could be considered as the indicators of soil contamination level along electricity powered trains, whereas indicators along diesel powered trains were not clear. Enrichment factor analysis proved that operation of freight trains had impact on pollution level of Cr, Ni, and Cd. Bioavailability of Mn, Co, Zn, and Cd in soil along electricity-powered railways were higher, and bioavailability of Pb in railways located in countryside was lower. Thus, enrichment and bioavailability of trace elements can be indicators of railway-originated trace elements pollution in soil.

76 FR 31009 - Iowa Northern Railway Company-Operation Exemption-North Central Iowa Rail Corridor, LLC

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-27

... Railway Company--Operation Exemption--North Central Iowa Rail Corridor, LLC Iowa Northern Railway Company...) Docket No. FD 35507, North Central Iowa Rail Corridor, LLC--Acquisition Exemption--Union Pacific Railroad Company, in which North Central Iowa Rail Corridor, LLC seeks to acquire from Union Pacific Railroad...

78 FR 79726 - Norfolk Southern Railway Company-Abandonment Exemption-in Gaston County, NC

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-31

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. AB 290 (Sub-No. 339X)] Norfolk Southern Railway Company--Abandonment Exemption--in Gaston County, NC Norfolk Southern Railway Company (NSR) has filed a verified notice of exemption under 49 CFR part 1152 subpart F-Exempt Abandonments to abandon approximately 0.5 miles of rail...

75 FR 32839 - Norfolk Southern Railway Company-Trackage Rights Exemption-The West Tennessee Railroad, LLC

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-09

... (Corinth), Miss.\\2\\ \\1\\ WTNN is a New Jersey limited liability company and NSR is a wholly owned subsidiary... Railway Company--Trackage Rights Exemption--The West Tennessee Railroad, LLC Pursuant to a written... rights to Norfolk Southern Railway Company (NSR) \\1\\ over approximately 118.9 miles of rail line...

78 FR 71037 - New Orleans & Gulf Coast Railway Company, Inc.-Lease Exemption Containing Interchange Commitment...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-27

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35777] New Orleans & Gulf... Company New Orleans & Gulf Coast Railway Company, Inc. (NOGC), a Class III rail carrier, has filed a... to a third-party railroad, BNSF Railway Company and the New Orleans Public Belt are located in very...

78 FR 41993 - Ann Arbor Railroad, Inc.-Lease Exemption-Norfolk Southern Railway Company

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-12

... number of carloads interchanged with NSR in a given year.\\1\\ AARR states that the interchange commitment..., Canadian National Railway Company (CN), CSX Transportation, Inc., and Wheeling & Lake Erie Railway in Toledo; the Indiana and Ohio Railway and CN in Diann, Mich.; NSR in Milan, Mich.; and Great Lakes Central...

77 FR 58218 - BNSF Railway Company-Abandonment Exemption-in McKinley County, N.M.

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-19

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. AB 6 (Sub-No. 485X)] BNSF Railway Company--Abandonment Exemption--in McKinley County, N.M. BNSF Railway Company (BNSF) has filed a... rail line located between milepost 14.50 and milepost 19.61, north of Defiance, in McKinley County, N.M...

77 FR 17122 - Indiana Southern Railroad, LLC-Temporary Trackage Rights Exemption-Norfolk Southern Railway Company

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-23

... Railroad, LLC--Temporary Trackage Rights Exemption--Norfolk Southern Railway Company Norfolk Southern Railway Company (NSR), pursuant to a written trackage rights agreement (Agreement), has agreed to grant overhead temporary trackage rights to Indiana Southern Railroad, LLC (ISRR) over NSR's line of railroad...

76 FR 12224 - Autauga Northern Railroad, L.L.C.-Lease and Operation Exemption-Norfolk Southern Railway Company

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-04

... Railroad, L.L.C.--Lease and Operation Exemption--Norfolk Southern Railway Company Autauga Northern Railroad... acquire by lease from Norfolk Southern Railway Company (NSR), and operate approximately 43.62 miles of... Holdings, Inc.--Continuance in Control Exemption-- Autauga Northern Railroad, L.L.C., in which Watco...

40. Topeka and Santa Fe Railway Company, Los Angeles, California, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

40. Topeka and Santa Fe Railway Company, Los Angeles, California, dated July 1937. (Microfiched drawings located at the Denver Service Center, #113/41906-set of 2) IMPROVEMENTS IN SEWAGE TREATMENT AND FILTER CHAMBER. - Water Reclamation Plant, Grand Canyon, Coconino County, AZ

78 FR 64597 - Youngstown & Southeastern Railway Company-Operation Exemption-Mule Sidetracks, L.L.C.

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-29

... & Southeastern Railway Company--Operation Exemption-- Mule Sidetracks, L.L.C. Youngstown & Southeastern Railway... agent of, and in the name of, Mule Sidetracks, L.L.C. (MSLLC), three miles of contiguous track segments... verified notice of exemption filed in Mule Sidetracks, L.L.C.--Acquisition Exemption--Columbiana County...

18. Marine Railway #1, location in foreground; Marine Railway #2 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

18. Marine Railway #1, location in foreground; Marine Railway #2 (broken cradle) center; cradle for Marine Railway #3 on right. - Thames Tow Boat Company, Foot of Farnsworth Street, New London, New London County, CT

76 FR 35947 - Maine Northern Railway Company-Modified Rail Certificate-in Aroostook and Penobscot Counties, ME

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-20

... Railway Company--Modified Rail Certificate--in Aroostook and Penobscot Counties, ME On June 7, 2011, Maine..., Me. The Line was the subject of an abandonment application granted by the Board in Montreal, Maine & Atlantic Railway, Ltd.--Discontinuance of Service and Abandonment--in Aroostook and Penobscot Counties, Me...

78 FR 2482 - Carload Express, Inc.-Continuance in Control Exemption-Ohio Terminal Railway Company

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-11

... exemption in Ohio Terminal Railway Company--Operation Exemption-- Hannibal Real Estate, LLC, Docket No. FD..., from milepost 60.5 at or near Powhatan Point, to milepost 72.7 at or near Hannibal, in Monroe County...

76 FR 82040 - Canexus Chemicals Canada L.P. v. BNSF Railway Company

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-29

... service order could be terminated. On November 3, 2011, UP, Canadian Pacific Railway Company (CP),\\2\\ and... on December 5, 2011. \\2\\ CP was identified by BNSF as a possible participant in an alternative... counsel who will be presenting argument and the name of the party counsel will be representing. CP is...

76 FR 20819 - Manufacturers Railway Company-Discontinuance Exemption-in St. Louis County, MO

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-13

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. AB-1075X] Manufacturers Railway Company--Discontinuance Exemption--in St. Louis County, MO On March 24, 2011, Manufacturers... Mississippi River flood wall on the east to U.S. Interstate 55 on the west, in St. Louis, Mo. The lines...

76 FR 22166 - Manufacturers Railway Company-Discontinuance Exemption-in St. Louis County, MO

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-20

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. AB-1075X] Manufacturers Railway Company--Discontinuance Exemption--in St. Louis County, MO AGENCY: Surface Transportation Board... Mississippi River flood wall on the east to U.S. Interstate 55 on the west, in St. Louis, MO. On April 13...

75 FR 20033 - Winston-Salem Southbound Railway Company-Corporate Family Transaction Exemption-High Point...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-16

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [STB Finance Docket No. 35338] Winston-Salem Southbound Railway Company--Corporate Family Transaction Exemption--High Point, Thomasville... under 49 CFR 1180.2(d)(3) for a transaction within a corporate family. Applicants state that HPTD will...

76 FR 57798 - Canadian Pacific Railway Company-Trackage Rights Exemption-Consolidated Rail Corporation

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-16

... Canadian Pacific Railway Company (CP) over CRC's Foreman Wye between the connection with Norfolk Southern... the draft trackage rights agreement between CRC and CP was filed with the notice of exemption. The... exemption was filed). According to CP, the purpose of the transaction is to allow for a more efficient...

78 FR 73585 - The Three Rivers Railway Company-Corporate Family Merger Exemption-Mahoning State Line Railroad...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-06

... Railway Company--Corporate Family Merger Exemption--Mahoning State Line Railroad Company The Three Rivers... filed a verified notice of exemption under 49 CFR 1180.2(d)(3) for a corporate family transaction... intends to merge MSLR into TRRC on or after that date. This is a transaction within a corporate family of...

76 FR 57798 - Canadian Pacific Railway Company-Trackage Rights Exemption-CSX Transportation, Inc.

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-16

... Pacific Railway Company (CP) between milepost CH 5.0 , in the vicinity of Fort Street at a connection.... (the Line).\\2\\ \\1\\ A redacted version of the trackage rights agreement between CSXT and CP was filed..., in which CP seeks to obtain overhead trackage rights over CRC's Foreman Wye, between Norfolk Southern...

78 FR 42999 - City of Pickens, S.C. and City of Easley, S.C.-Acquisition Exemption-Pickens Railway Company

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-18

....C. and City of Easley, S.C.--Acquisition Exemption--Pickens Railway Company The City of Pickens, S.C., and the City of Easley, S.C. (collectively, the Cities or Petitioners), both noncarrier political..., 16 U.S.C. 1247(d), and 49 CFR 1152.29 to permit the Cities to negotiate with Pickens Railway to...

78 FR 49605 - Norfolk Southern Railway Company-Discontinuance of Service Exemption-in Ontario, Seneca, and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-14

... 20037. If the verified notice contains false or misleading information, the exemption is void ab initio... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. AB 290 (Sub-No. 356X)] Norfolk Southern Railway Company--Discontinuance of Service Exemption--in Ontario, Seneca, and Wayne...

78 FR 56769 - South Carolina Division of Public Railways, d/b/a Palmetto Railways-Intra-Corporate Family...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-13

... Division of Public Railways, d/b/a Palmetto Railways--Intra-Corporate Family Transaction Exemption--The... Cooper and Berkeley Railroad Company South Carolina Division of Public Railways, d/b/a Palmetto Railways... 1180.2(d)(3) for an intra-corporate family transaction. According to SCPR, it owns the rail trackage...

76 FR 75602 - Hilton & Albany Railroad, Inc.-Lease and Operation Exemption-Norfolk Southern Railway Company

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-02

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35567] Hilton & Albany Railroad, Inc.--Lease and Operation Exemption-- Norfolk Southern Railway Company Hilton & Albany Railroad... milepost J 302.3 near Albany West, Ga., and milepost J 357.8 near Hilton, Ga. (the line). This transaction...

75 FR 71487 - Norfolk Southern Railway Company-Abandonment Exemption-in Crawford County, GA; Georgia Midland...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-23

... 1059X] Norfolk Southern Railway Company--Abandonment Exemption--in Crawford County, GA; Georgia Midland Railroad, Inc.\\1\\--Discontinuance of Service Exemption--in Crawford County, GA \\1\\ Based on information in a letter from one of NSR's attorneys, this is the correct name of the discontinuing railroad-- not...

78 FR 57682 - Norfolk Southern Railway Company-Discontinuance of Service Exemption-in Monroe County, Mich.

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-19

... is void ab initio. Board decisions and notices are available on our Web site at www.stb.dot.gov... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. AB 290 (Sub-No. 357X)] Norfolk Southern Railway Company--Discontinuance of Service Exemption--in Monroe County, Mich. Norfolk...

77 FR 26603 - Central Midland Railway Company and Progressive Rail Inc.-Intra-Corporate Family Transaction...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-04

... Railway Company and Progressive Rail Inc.--Intra- Corporate Family Transaction Exemption Central Midland... verified notice of exemption under 49 CFR 1180.2(d)(3) and 1180.2(d)(6) for an intra-corporate family...). \\2\\ See Progressive Rail Inc.--Intra-Corporate Family Transaction Exemption--Airlake Terminal Ry., FD...

77 FR 12909 - Eastern Maine Railway Company-Assignment of Trackage Rights Exemption-Montreal, Maine & Atlantic...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-02

.... (MMA) has agreed to assign its overhead trackage rights to the Eastern Maine Railway Company (EMR) over... from MMA and to operate 28.75 miles of rail line. MMA, the former owner of the Line, proposed to... operator.\\3\\ In anticipation of MNRC service, MMA acquired trackage rights over the Line to continue to...

78 FR 60375 - Norfolk Southern Railway Company-Discontinuance of Service Exemption-in Claiborne County, TN, and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-01

...); Docket No. AB 55 (Sub-No. 732X)] Norfolk Southern Railway Company--Discontinuance of Service Exemption... exemption under 49 CFR part 1152 Subpart F--Exempt Abandonments and Discontinuances of Service and Trackage Rights for NSR to discontinue service over, and for CSXT to discontinue trackage rights operations over...

Railway suicide attempts are associated with amount of sunlight in recent days.

PubMed

Kadotani, Hiroshi; Nagai, Yumiko; Sozu, Takashi

2014-01-01

To assess the relationship between hours of sunlight and railway suicide attempts, 3-7 days before these attempts. All railway suicide attempts causing railway suspensions or delays of 30 min or more between 2002 and 2006. We used a linear probability model to assess this relationship. This study was conducted at Tokyo, Kanagawa, and Osaka prefectures in Japan. Data were collected from the railway delay incident database of the Japanese Railway Technical Research Institute and public weather database of the Japan Meteorological Agency. About 971 railway suicides attempts occurred between 2002 and 2006 in Tokyo, Kanagawa, and Osaka. Less sunlight in the 7 days leading up to the railway suicide attempts was associated with a higher proportion of attempts (p=0.0243). Sunlight over the 3 days before an attempt had a similar trend (p=0.0888). No difference was found in sunlight hours between the days with (median: 5.6 [IQR: 1.1-8.8]) and without (median: 5.7 [IQR: 1.0-8.9]) railway suicide attempts in the evening. Finally, there was no apparent correlation between the railway suicide attempts and the monthly average sunlight hours of the attempted month or those of a month before. Railway suicides were not the main suicidal methods in Japan, We observed an increased proportion of railway suicide attempts after several days without sunlight. Light exposure (blue light or bright white light) in trains may be useful in reducing railway suicides, especially when consecutive days without sunshine are forecasted. © 2013 Elsevier B.V. All rights reserved.

76 FR 32266 - Maine Northern Railway Company-Trackage Rights Exemption-Montreal, Maine & Atlantic Railway, Ltd.

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-03

... written trackage rights agreement, Montreal, Maine & Atlantic Railway, Ltd. (MMA) has agreed to grant... milepost 109 on MMA's Millinocket Subdivision) and Brownville Junction, Me. (at or about milepost 104.84 on the Mattawamkeag Subdivision of the Eastern Maine Railway (EMR)), including MMA's Brownville Junction...

77 FR 49862 - Santa Cruz and Monterey Bay Railway Company-Acquisition and Operation Exemption-Union Pacific...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-17

..., Big Trees & Pacific Railway Company at milepost 20.4 in Santa Cruz, Cal., and an additional 3.6 miles... respect to the Line. The petition will be addressed in a separate decision. The transaction may be... Class II or Class I rail carrier and will not exceed $5 million. If the verified notice contains false...

76 FR 35068 - Duluth, Missabe and Iron Range Railway Company; Abandonment Exemption-in St. Louis County, MN

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-15

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. AB 101 Sub-No. 18X] Duluth, Missabe and Iron Range Railway Company; Abandonment Exemption--in St. Louis County, MN Duluth, Missabe and... Duluth, St. Louis County, Minn.\\1\\ The line traverses United States Postal Service Zip Code 55808. \\1...

76 FR 32265 - Maine Northern Railway Company-Trackage Rights Exemption-Montreal, Maine & Atlantic Railway, Ltd.

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-03

... written trackage rights agreement, Montreal, Maine & Atlantic Railway, Ltd. (MMA) has agreed to grant... milepost 260 on MMA's Madawaska Subdivision) and the connection to the Canadian National Railway (CN) in St... ``* * * between MP 260 and the connection with MMA's Van Buren Subdivision at MP 264 and between the connection...

Asymmetrical Integration: Lessons from a Railway Empire.

PubMed

McDonald, Kate

2015-01-01

This article reexamines railway imperialism in Manchuria from the perspective of global network building. Through a case study of the Japanese-owned South Manchuria Railway Company (SMR), I trace how one railway empire used through traffic agreements to integrate Northeast Asian railways into a global network while at the same time installing itself as the necessary intermediary between European and Asian overland traffic. I argue that the SMR's pursuit of global reach and local dominance compels us to reconsider the traditional division of border-crossing railways into international and imperialist types, and instead to examine how border-crossing railways contributed to the uneven or "asymmetrical" integration of the global transportation infrastructure.

47. Detail of gears for steam powered Marine Railway #1, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

47. Detail of gears for steam powered Marine Railway #1, and drive equipment for Railways #l and #2, Marine Railway Headhouse, ground floor, north end, drive gears in foreground, pulling gears for Railway # 1 in background. - Thames Tow Boat Company, Foot of Farnsworth Street, New London, New London County, CT

The relationship between railway noise and community annoyance in Korea.

PubMed

Lim, Changwoo; Kim, Jaehwan; Hong, Jiyoung; Lee, Soogab

2006-10-01

A study of community annoyance caused by exposures to railway noise was carried out in 18 areas along railway lines to accumulate social survey data and assess the relationship between railway noise levels and annoyance responses in Korea. Railway noise levels were measured with portable sound-level meters. Social surveys were administered to people living within 50 m of noise measurement sites. A questionnaire contained demographic factors, degree of noise annoyance, interference with daily activities, and health-related symptoms. The question relating to noise annoyance was answered on an 11-point numerical scale. The randomly selected respondents, who were aged between 18 to 70 years of age, completed the questionnaire independently. In total, 726 respondents participated in social surveys. Taking into consideration the urban structure and layout of the residential areas of Korea, Japan, and Europe, one can assume that the annoyance responses caused by the railway noise in this study will be similar to those found in Japan, which are considerably more severe than those found in European countries. This study showed that one of the most important factors contributing to the difference in the annoyance responses between Korea and Europe is the distance between railways and houses.

77 FR 3840 - Iowa Interstate Railroad, Ltd.-Lease Exemption-Line of Cedar Rapids and Iowa City Railway Company

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-25

... Railroad, Ltd.--Lease Exemption--Line of Cedar Rapids and Iowa City Railway Company AGENCY: Surface... from the prior approval requirements of 49 U.S.C. 10902 for Iowa Interstate Railroad, Ltd. (IAIS), a Class II rail carrier, to lease and operate 8.4 miles of railroad owned by Cedar Rapids & Iowa City...

Bipartite Networks of Universities and Companies: Recruiting New Graduates in Japan

NASA Astrophysics Data System (ADS)

Takahashi, Katsuhide; Kobayashi, Yuh; Kondo, Yohei; Takayasu, Hideki; Takayasu, Misako

We investigated the bipartite Universities-Companies Network in Japan in terms of companies' recruitment of new graduates. In Japan, graduates of universities are typically hired by companies upon their graduation. To examine socially accepted ideas about this recruiting system, we combined different types of data on education, recruitment and corporate finance. The hypothesis that graduates from prestigious universities have the advantage of entering excellent companies was verified by examining the determinants of ratio of graduates entering top-ranked companies. Through hierarchical clustering, we obtained classification trees and observed the stability of their structure, as well as interesting changes corresponding to the business climate. We also calculated weighted HITS hub and authority values for each university and company and identified the links between the results of this analysis and those above. Finally, analysis of all the data indicated that excellent companies recruiting many graduates from prestigious universities do not necessarily show superb performance in profit-making and growth.

56. Detail of gear for Marine Railway #2, steam powered ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

56. Detail of gear for Marine Railway #2, steam powered Marine Railway Headhouse, south end: hole in foreground is where gear now installed in Headhouse for Marine Railway #3 was removed. - Thames Tow Boat Company, Foot of Farnsworth Street, New London, New London County, CT

Combined Effects of High-Speed Railway Noise and Ground Vibrations on Annoyance

PubMed Central

Yokoshima, Shigenori; Morihara, Takashi; Sato, Tetsumi; Yano, Takashi

2017-01-01

The Shinkansen super-express railway system in Japan has greatly increased its capacity and has expanded nationwide. However, many inhabitants in areas along the railways have been disturbed by noise and ground vibration from the trains. Additionally, the Shinkansen railway emits a higher level of ground vibration than conventional railways at the same noise level. These findings imply that building vibrations affect living environments as significantly as the associated noise. Therefore, it is imperative to quantify the effects of noise and vibration exposures on each annoyance under simultaneous exposure. We performed a secondary analysis using individual datasets of exposure and community response associated with Shinkansen railway noise and vibration. The data consisted of six socio-acoustic surveys, which were conducted separately over the last 20 years in Japan. Applying a logistic regression analysis to the datasets, we confirmed the combined effects of vibration/noise exposure on noise/vibration annoyance. Moreover, we proposed a representative relationship between noise and vibration exposures, and the prevalence of each annoyance associated with the Shinkansen railway. PMID:28749452

Combined Effects of High-Speed Railway Noise and Ground Vibrations on Annoyance.

PubMed

Yokoshima, Shigenori; Morihara, Takashi; Sato, Tetsumi; Yano, Takashi

2017-07-27

The Shinkansen super-express railway system in Japan has greatly increased its capacity and has expanded nationwide. However, many inhabitants in areas along the railways have been disturbed by noise and ground vibration from the trains. Additionally, the Shinkansen railway emits a higher level of ground vibration than conventional railways at the same noise level. These findings imply that building vibrations affect living environments as significantly as the associated noise. Therefore, it is imperative to quantify the effects of noise and vibration exposures on each annoyance under simultaneous exposure. We performed a secondary analysis using individual datasets of exposure and community response associated with Shinkansen railway noise and vibration. The data consisted of six socio-acoustic surveys, which were conducted separately over the last 20 years in Japan. Applying a logistic regression analysis to the datasets, we confirmed the combined effects of vibration/noise exposure on noise/vibration annoyance. Moreover, we proposed a representative relationship between noise and vibration exposures, and the prevalence of each annoyance associated with the Shinkansen railway.

Automatic Rail Extraction and Celarance Check with a Point Cloud Captured by Mls in a Railway

NASA Astrophysics Data System (ADS)

Niina, Y.; Honma, R.; Honma, Y.; Kondo, K.; Tsuji, K.; Hiramatsu, T.; Oketani, E.

2018-05-01

Recently, MLS (Mobile Laser Scanning) has been successfully used in a road maintenance. In this paper, we present the application of MLS for the inspection of clearance along railway tracks of West Japan Railway Company. Point clouds around the track are captured by MLS mounted on a bogie and rail position can be determined by matching the shape of the ideal rail head with respect to the point cloud by ICP algorithm. A clearance check is executed automatically with virtual clearance model laid along the extracted rail. As a result of evaluation, the accuracy of extracting rail positions is less than 3 mm. With respect to the automatic clearance check, the objects inside the clearance and the ones related to a contact line is successfully detected by visual confirmation.

Development of a Comprehensive Programme to Prevent and Reduce the Negative Impact of Railway Fatalities, Injuries and Close Calls on Railway Employees.

PubMed

Bardon, Cécile; Mishara, Brian L

2015-09-01

This article presents a strategy to prevent trauma, support and care for railway personnel who experience critical incidents (CI) on the job, usually fatalities by accident or suicide. We reviewed all publications on CI management, support and care practices in the railway industry, as well as practices in place in Canada (unpublished protocols). Semi structured interviews were conducted with 40 train engineers and conductors involved in CIs and the content was coded and analysed quantitatively. Employees' satisfaction with the help received after the incident varies according to the behaviour of the local manager, company officers and police, the level of compliance with existing company protocols to help them, the presence of unmet expectations for support and care, their perceived competency of clinicians they consulted and the level of trust toward their employers. On the basis of the interview results, the review of existing railway practices and discussions with railway stakeholders, a model protocol was developed for a comprehensive workplace prevention, support and care protocol to reduce the negative impact of railway critical incidents on employees. This protocol includes preventive actions before traumatic events occur, immediate responses at the site of incident, interventions within the first few days after the incident and longer term support and interventions provided by the company and by outsourced experts.

13. Steam powered Marine Railway Headhouse and Offices, center; chain ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. Steam powered Marine Railway Headhouse and Offices, center; chain is in front of electric powered Marine Railway Headhouse. - Thames Tow Boat Company, Foot of Farnsworth Street, New London, New London County, CT

76 FR 22746 - Wiregrass Central Railway, LLC-Acquisition and Operation Exemption-Wiregrass Central Railroad...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-22

... Railway, LLC--Acquisition and Operation Exemption--Wiregrass Central Railroad Company, Inc. Wiregrass Central Railway, LLC (WCR), a noncarrier, has filed a verified notice of exemption under 49 CFR 1150.31 to acquire from Wiregrass Central Railroad Company, Inc. (WGCR), and to operate approximately 21.2 miles of...

75 FR 25313 - Stillwater Central Railroad, Inc.-Trackage Rights Exemption-Wichita, Tillman and Jackson Railway...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-07

... Railroad, Inc.--Trackage Rights Exemption-- Wichita, Tillman and Jackson Railway Company, Inc., and Hollis & Eastern Railroad Company Pursuant to a written trackage rights agreement (Trackage Agreement) dated January 22, 1992, Wichita, Tillman & Jackson Railway Co. (WTJ) granted approximately 4.6 miles of...

77 FR 21835 - Savage, Bingham & Garfield Railroad Company-Trackage Rights Exemption-Elgin, Joliet and Eastern...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-11

... & Garfield Railroad Company--Trackage Rights Exemption--Elgin, Joliet and Eastern Railway Company Pursuant to a written trackage rights agreement dated March 5, 2012, Elgin, Joliet and Eastern Railway Company... Subdivision in Whiting, Ind. \\1\\ Elgin, Joliet and Eastern Railway Company is an indirect subsidiary of...

[Anti-counterfeit activities of pharmaceutical companies in Japan: for patient safety].

PubMed

Shofuda, Ken-ichi; Aragane, Katsumi; Igari, Yasutaka; Matsumoto, Kinya; Ito, Kazuya

2014-01-01

Global spread of counterfeit medicines is an imminent threat for the patients' safety. Although major targets of counterfeits are still erectile dysfunction (ED) drugs in the industrialized countries, including Japan, anti-cancer agents and some medicines for metabolic syndromes are also being counterfeited and circulated to the market mainly through the Internet. Due to the global expansion of the business, pharmaceutical companies based in Japan are suffering from the damage of counterfeits, illegal sales including diversion, and thefts, which have never been experienced in the conventional domestic market. We, pharmaceutical companies, must be responsible for the prevention of the prevalence because our mission is to deliver effective and safe medicine to patients. For this end, we are taking necessary actions including, 1. Forestalling counterfeit, falsification and illicit trade: Measures to prevent counterfeiting are taken by introducing anti-counterfeit technologies to the packaging and tablets on a risk basis. It is also important to establish supply chain security on a global scale. 2. Finding out counterfeits and cooperating crackdown: We are conducting market and internet surveillances when high risk products are sold in high risk markets. The outcome of the criminal investigation is reported to authorities and police if necessary. 3. Conducting educational campaign to medical staff or patients: For example, four companies which manufacture and sell ED drug in Japan are collaboratively continuing activities to raise the awareness of the danger of Internet purchase. To deliver effective and safe medicines stably and globally, pharmaceutical companies extend comprehensive measures against counterfeit and illicit trading.

77 FR 2127 - Birmingham Terminal Railway, L.L.C.-Acquisition and Operation Exemption-Birmingham Southern...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-13

... Terminal Railway, L.L.C.--Acquisition and Operation Exemption--Birmingham Southern Railroad Company Birmingham Terminal Railway, L.L.C. (BHRR), a noncarrier, has filed a verified notice of exemption under 49... Exemption--Birmingham Terminal Railway, L.L.C., wherein Watco Holdings, Inc., seeks Board approval to...

The School Car: Bringing the Three R's to Newfoundland's Remote Railway Settlements (1936-1942).

ERIC Educational Resources Information Center

Noseworthy, Randy P.

During the mid-1930s, the main line of the Newfoundland (Canada) Railway stretched 547 miles from St. John's to Port aux Basques, and railway workers and their families lived along the line in small isolated settlements. The provincial department of education, the Newfoundland Railway, and the Anglo-Newfoundland Development Company devised an…

Japan Tobacco International: To 'be the most successful and respected tobacco company in the world'.

PubMed

MacKenzie, Ross; Eckhardt, Jappe; Widyati Prastyani, Ade

2017-03-01

Japan Tobacco International (JTI) is the international division of Japan Tobacco Incorporated, and the world's third largest transnational tobacco company. Founded in 1999, JTI's rapid growth has been the result of a global business strategy that potentially serves as a model for other Asian tobacco companies. This paper analyses Japan Tobacco Incorporated's global expansion since the 1980s in response to market opening, foreign competition, and declining share of a contracting domestic market. Key features of its global strategy include the on-going central role and investment by the Japanese government, and an expansion agenda based on mergers and acquisitions. The paper also discusses the challenges this global business strategy poses for global tobacco control and public health. This paper is part of the special issue 'The Emergence of Asian Tobacco Companies: Implications for Global Health Governance'.

76 FR 31010 - Montreal, Maine & Atlantic Railway, Ltd.-Trackage Rights Exemption-Maine Northern Railway Company

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-27

... rights to Montreal, Maine & Atlantic Railway, Ltd. (MMA) over approximately 151 miles of rail line owned... Madawaska, ME (Subject Trackage).\\1\\ MMA states that, as of January 14, 2011, it sold the Subject Trackage... operate these lines. \\1\\ The Subject Trackage was formerly part of the Madawaska Subdivision of MMA...

75 FR 34530 - Nittany & Bald Eagle Railroad Company-Temporary Trackage Rights Exemption-Norfolk Southern...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-17

... Eagle Railroad Company--Temporary Trackage Rights Exemption--Norfolk Southern Railway Company Norfolk Southern Railway Company (NSR), pursuant to a written trackage rights agreement dated April 13, 2010, has agreed to grant nonexclusive overhead temporary trackage rights to Nittany & Bald Eagle Railroad Company...

77 FR 18881 - Nittany & Bald Eagle Railroad Company-Temporary Trackage Rights Exemption-Norfolk Southern...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-28

... Eagle Railroad Company--Temporary Trackage Rights Exemption--Norfolk Southern Railway Company Norfolk Southern Railway Company (NSR), pursuant to a written trackage rights agreement dated February 3, 2012, has agreed to grant nonexclusive overhead temporary trackage rights to Nittany & Bald Eagle Railroad Company...

Study on high reliability safety valve for railway vehicle

NASA Astrophysics Data System (ADS)

Zhang, Xuan; Chen, Ruikun; Zhang, Shixi; Xu, BuDu

2017-09-01

Now, the realization of most of the functions of the railway vehicles rely on compressed air, so the demand for compressed air is growing higher and higher. This safety valve is a protection device for pressure limitation and pressure relief in an air supply system of railway vehicles. I am going to introduce the structure, operating principle, research and development process of the safety valve designed by our company in this document.

Japan Tobacco International: To ‘be the most successful and respected tobacco company in the world’

PubMed Central

MacKenzie, Ross; Eckhardt, Jappe; Widyati Prastyani, Ade

2017-01-01

ABSTRACT Japan Tobacco International (JTI) is the international division of Japan Tobacco Incorporated, and the world’s third largest transnational tobacco company. Founded in 1999, JTI’s rapid growth has been the result of a global business strategy that potentially serves as a model for other Asian tobacco companies. This paper analyses Japan Tobacco Incorporated’s global expansion since the 1980s in response to market opening, foreign competition, and declining share of a contracting domestic market. Key features of its global strategy include the on-going central role and investment by the Japanese government, and an expansion agenda based on mergers and acquisitions. The paper also discusses the challenges this global business strategy poses for global tobacco control and public health. This paper is part of the special issue ‘The Emergence of Asian Tobacco Companies: Implications for Global Health Governance’. PMID:28139966

The trading company in space development in Japan

NASA Astrophysics Data System (ADS)

Gonda, Toshi N.

Trading companies have a unique status in the Japanese market and a really deep involvement in Japanese trade. They are also involved in space development and the space industry as well. An overview of trading companies activities and, more specifically, a way of involving them more in the space industry are presented. The activities of Nissho Iwai Corporation, one of the Sogo Shosha, are described in detail. Their activities in the space industry have two aspects, one is social and the other is commercial. They have been stimulating space projects in these aspects. There are several international cooperative space projects between Japan and the U.S. These projects are proceeding on a government to government basis. But, it is worthwhile to realize that the Sogo Shosha may create trade flow through increased international space cooperation in the private sector.

Noise-induced hearing loss in a longitudinal study of Norwegian railway workers.

PubMed

Lie, Arve; Skogstad, Marit; Johnsen, Torstein Seip; Engdahl, Bo; Tambs, Kristian

2016-09-02

The aim of this study was to analyse longitudinal data to assess the risk of noise-induced hearing loss (NIHL) in Norwegian railway workers. Longitudinal. A major Norwegian railway company. We examined data from the first and last audiograms for the period 1991-2014, from 9640 railway workers with varying occupational noise exposure and with an average observation period of 10 years. The course of hearing acuity in seven groups of railway workers (train drivers, conductors, bus drivers, traffic controllers, train maintenance workers, track maintenance workers and others) were compared with each other and with ISO standards (ISO 1999). The change in hearing threshold during the observation period was 2-3 dB in the 0.5-4 kHz range and 6-7 dB in the 3-6 kHz range adjusted for age and sex, for all occupational groups, which is slightly less than expected (8 dB) according to ISO 1999. The risk of NIHL in Norwegian railway workers during the period 1991-2014 has been negligible. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Distribution and identification of airborne fungi in railway stations in Tokyo, Japan.

PubMed

Kawasaki, Tamami; Kyotani, Takashi; Ushiogi, Tomoyoshi; Izumi, Yasuhiko; Lee, Hunjun; Hayakawa, Toshio

2010-01-01

The current study was performed to (1) understand the distribution of airborne fungi culturable on dichloran-glycerol agar (DG18) media over a one-year monitoring period, (2) identify the types of airborne fungi collected, and (3) compare and contrast under- and above-ground spaces, in two railway stations in Tokyo, Japan. Measurements of airborne fungi were taken at stations A and B located in Tokyo. Station A had under- and above-ground concourses and platforms whereas station B had spaces only above-ground. Airborne fungi at each measurement position were collected with an air sampler on DG18 media. After cultivation of the sample plates, the number of fungi colonies was counted on each agar plate. In station A, the underground platform was characterized as (1) having the highest humidity and (2) a high concentration of airborne fungi, with (3) a high proportion of non-sporulating fungi (NSF) and Aspergillus versicolor. There was a strong positive correlation between the concentrations of airborne particles and fungi in station A. Common aspects of the two stations were (1) that fungi were mostly detected in autumn, and (2) there was no correlation between the humidity and concentration of fungi throughout the year. The results of this study indicate that the distribution and composition of fungi differ depending on the structure of the station.

Pharmaceutical company perspectives on current safety risk communications in Japan.

PubMed

Urushihara, Hisashi; Kobashi, Gen; Masuda, Hideaki; Taneichi, Setsuko; Yamamoto, Michiko; Nakayama, Takeo; Kawakami, Koji; Matsuda, Tsutomu; Ohta, Kaori; Sugimori, Hiroki

2014-01-01

In 1987, a group infection of hepatitis in patients receiving a contaminated fibrinogen product was first reported to the Japanese regulatory agency. Eventually, this serious drug incident involved more than 10,000 cases of infection. In response, the Government of Japan established a responding inspection committee in 2008 to make recommendations for the restructuring of drug regulatory administration. The final report was issued in 2010. One agenda item of this restructuring was the improvement of drug-related safety risk communications. Our research group on drug safety risk communications, which is funded by the Government of Japan, surveyed pharmaceutical companies regarding their perspective on current risk communications. The survey was conducted using an anonymous questionnaire developed for this study which included the three operational domains of targets, contents, and measures of drug risk communication. Fifty-two of the 74 member companies of the Post-marketing Surveillance Subcommittee of the Japan Pharmaceutical Manufacturer's Association participated, and this response rate of more than 70% was considered sufficient to ensure the external validity of the survey results. Results showed that the most highly prioritized aspect of risk messaging was the strength of evidence, and that outcome evaluation of risk communication gained recognition. Further, while physicians and pharmacists were the most prioritized communication targets, pharmacovigilance departments devoted the most resources to regulators, at more than 30%. The Internet was recognized as a useful public source of risk information, whereas Drug Guides for Patients delivered on the web were considered under-recognized. Further discussion of these results with the aim of enhancing the restructuring of the Japanese drug regulatory administration system are warranted.

GSM-Railway as part of the European Rail Traffic Management System

NASA Astrophysics Data System (ADS)

Bibac, Ionut

2007-05-01

GSM-R is a vital component inside the ERTMS which is also an essential element of European Community rail projects; investment in equipping and the rolling stock with ERTMS could reach 5 billion eurodollars in the period 2007-2016. GSM-R is the result of over ten years of collaboration between the various European railway companies, the railway communication industry and the different standardization bodies. GSM-R provides a secure platform for voice and data communication between the operational staff of the railway companies including drivers, dispatchers, shunting team members, train engineers, and station controllers. It delivers advanced features such as group calls, voice broadcast, location based connections, and call pre-emption in case of an emergency, which significantly improves communication, collaboration, and security management across operational staff members. Taking into account the above mentioned, the paper will permit to audience to discover the GSM-R network architecture, services and applications proposed by this technology together with the future development and market situation due to the market liberalization.

76 FR 22745 - Three Notch Railway, LLC-Acquisition and Operation Exemption-Three Notch Railroad Co., Inc.

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-22

... Railway, LLC--Acquisition and Operation Exemption-- Three Notch Railroad Co., Inc. Three Notch Railway... from Three Notch Railroad Co., Inc. (TNHR) and to operate approximately 34 miles of rail line \\1... assigned TNHR's agreement with Andalusia & Conecuh Railroad Company, which was assigned to TNHR by the...

Efficiency measures and output specification : the case of European railways

DOT National Transportation Integrated Search

2000-12-01

This study analyzes the sensitivity of the efficiency indicators of a sample of European railway companies to different alternatives in output specification. The results vary according to the specification selected. Investigating the causes of these ...

Think tank (2) Its development and the current situation of the key organizations in Japan

NASA Astrophysics Data System (ADS)

Obara, Michio

There were some think tank businesses in Japan before the war. South Manchuria Railway Company established its Research Department for the purpose of getting power to control Manchuria as a colony, and got the good results. Think tank business was flourishing three times after the war. This business attracts much attention when the social and economic paradigm is going to change. Among the key large-scale think tanks in Japan, Nomura Research Institute, Ltd. (NRI) was the first to enhance the system functions by the merger, and posted think tank function up in the SI business. Mitsubishi Research Institute, Inc. (MRI) intends to be an orthodox think tank, and established an advanced research institute and the laboratory for R&D. Daiwa Institute of Research, Ltd. (DIR) focuses on economic forecast by using system. Fuji Research Institute. Corp. (FUJI RIC) focuses on survey and policy proposing in macro-economics, and analyzing technology. The Japan Research Institute, Ltd. (JRI) focuses on regional development, and R&D in advanced technology.

Herbicide use on railway tracks for safety reasons in Germany?

PubMed

Schweinsberg, F; Abke, W; Rieth, K; Rohmann, U; Zullei-Seibert, N

1999-06-30

A short overview on the occurrence of herbicides in groundwater and drinking water located in the vicinity of railway tracks in Germany is presented. The study has been conducted using the experience of various water supply companies and includes a literature research on the subject. It has been documented that in Germany only 1% of the total area treated with pesticides was under management of the former Deutsche Bundesbahn before 1990. The specific amount applied on the railway tracks was, however, a factor of 6 higher than that used in agriculture, although it must be borne in mind that the retaining capacity of railway tracks for pesticides is much lower. The herbicides applied ranged from 2,4-D and 2,4,5-T, triazine derivatives, e.g. atrazine and urea derivatives such as diuron. Traces of almost all of the herbicides applied could be detected in samples of groundwater and drinking water in the vicinity of railway tracks. Since 1997 only glyphosate has been used.

17. From left to right: Marine Railway Headhouse and Offices, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

17. From left to right: Marine Railway Headhouse and Offices, Boiler Room, first skylight, chimney for Boiler, Blacksmith Shop, second skylight, and Pipe, Paint, and Electrical Shops. - Thames Tow Boat Company, Foot of Farnsworth Street, New London, New London County, CT

Social Experiments in Tokyo Metropolitan Area Convection Study for Extreme Weather Resilient Cities(TOMACS)

NASA Astrophysics Data System (ADS)

Tsuyoshi, Nakatani; Nakamura, Isao; MIsumi, Ryohei; Shoji, Yoshinori

2015-04-01

Introduction TOMACS research project has been started since 2010 July in order to develop the elementary technologies which are required for the adaptation of societies to future global warming impacts that cannot be avoided by the reduction of greenhouse gases. In collaboration with related government institutions, local governments, private companies, and residents, more than 25 organizations and over 100 people are participated. TOMACS consists of the following three research themes: Theme 1: Studies on extreme weather with dense meteorological observations Theme 2: Development of the extreme weather early detection and prediction system Theme 3: Social experiments on extreme weather resilient cities Theme 1 aims to understand the initiation, development, and dissipation processes of convective precipitation in order to clarify the mechanism of localized heavy rainfall which are potential causes of flooding and landslides. Theme 2 aims to establish the monitoring and prediction system of extreme phenomena which can process real-time data from dense meteorological observation networks, advanced X-band radar network systems and predict localized heavy rainfalls and strong winds. Through social experiments, theme 3 aims to establish a method to use information obtained by the monitoring system of extreme phenomena to disaster prevention operations in order to prevent disasters and reduce damage. Social Experiments Toyo University is the core university for the social experiments accomplishment. And following organizations are participating in this research theme: NIED, the Tokyo Metropolitan Research Institute for Environmental Protection (TMRIEP), University of Tokyo, Tokyo Fire Department (TFD), Edogawa Ward in Tokyo, Yokohama City, Fujisawa City and Minamiashigara City in Kanagawa, East Japan Railway Company, Central Japan Railway Company, Obayashi Corporation, and Certified and Accredited Meteorologists of Japan(CAMJ). The social experiments have carried out�

Systematic review of research on railway and urban transit system suicides.

PubMed

Mishara, Brian L; Bardon, Cécile

2016-03-15

We critically review research on railway suicides to inform suicide prevention initiatives and future studies, including who is at risk and why, and behaviours at track locations. Literature was identified from Scopus, Web of Science, Google Scholar and our documentation centre, and contacting 71 railway companies, resulting in 716 articles and eight unpublished reports, with 94 having empirical data on 55 unique studies. Research quality was critically assessed. The quality of studies varies greatly with frequent shortcomings: no justification of sample size, lacking information on the reliability and validity of measures, no explanation nor theoretical understanding of findings. Railway suicides resemble closely people who use other methods, although they tend to be younger. As with other suicide methods, mental health problems are likely to be present. Railway suicide attempters usually die, but most urban transportation systems attempters survive. Railway suicides are rarely impulsive; people usually go to the railway for the purpose of killing themselves. Hotspots have been the focus of some prevention measures. We know little about why people choose railway suicide, but studies of survivors suggest they often thought they would have an immediate, certain and painless death. Media reports on railway suicides can increase their incidence. Most research focuses on the incidence and characteristics of events and attempters. Research has not shown that railway suicides are different from suicides by other means. Better quality research is needed, particularly studies that investigate why people use railways to kill themselves and how railway suicides can be effectively prevented, as well as more evaluations of prevention programmes. Because of significant variations by country and region in characteristics of railway suicides, prevention programmes should conduct a local assessment of the characteristics of attempters and incidents. We need more research on

77 FR 19417 - Affton Terminal Railroad Company-Operation Exemption1

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-30

... Railroad Company--Operation Exemption\\1\\--Affton Trucking Company Affton Terminal Railroad Company (ATRR... to an agreement with Affton Trucking Company (ATC),\\3\\ approximately 2.0 miles of railroad right-of... Railroad Association of St. Louis and BNSF Railway Company and inbound carloads for transloading into...

Strategic balance of drug lifecycle management options differs between domestic and foreign companies in Japan.

PubMed

Yamanaka, Takayuki; Kano, Shingo

2016-01-01

Drug approvals and patent protections are critical in drug lifecycle management (LCM) in order to maximize drug discovery investment returns. We analyzed drug LCM activities implemented by 10 top companies in Japan, focusing on drug approvals and patent term extensions. Foreign companies acquired numerous drug approvals primarily for new molecular entities (NMEs), while Japanese companies mainly obtained approvals for improved drugs including new indications, and intensively extended patent terms. Furthermore, we discovered three factors likely responsible for differences in drug LCM strategies of Japanese and foreign companies: research and development capacities for drugs, drug lags of foreign-origin NMEs, and cooperation between Research and Development Departments and Intellectual Property Departments.

77 FR 49863 - Iowa Pacific Holdings, LLC and Permian Basin Railways-Continuance in Control Exemption-Santa Cruz...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-17

... interconnection with Santa Cruz, Big Trees & Pacific Railway Company at milepost 20.4 in Santa Cruz, Cal., and an... Railroad, located in Colorado; (4) Saratoga & North Creek Railway, located in New York; (5) [[Page 49864... in a separate decision. The transaction may be consummated on or after August 31, 2012 (the effective...

Child Abuse and Neglect in Japan: Coin-Operated-Locker Babies.

ERIC Educational Resources Information Center

Kouno, Akihisa; Johnson, Charles F.

1995-01-01

This paper reviews Japan's child abuse/neglect history, including the incidence of "coin-operated-locker babies," where murdered infants are hidden in railway and airport lockers, and actions taken to reduce this problem. The incidence of child abuse in Japan and the United States is compared, and social influences on the number of…

Application of lap laser welding technology on stainless steel railway vehicles

NASA Astrophysics Data System (ADS)

Wang, Hongxiao; Wang, Chunsheng; He, Guangzhong; Li, Wei; Liu, Liguo

2016-10-01

Stainless steel railway vehicles with so many advantages, such as lightweight, antirust, low cost of maintenance and simple manufacturing process, so the production of high level stainless steel railway vehicles has become the development strategy of European, American and other developed nations. The current stainless steel railway vehicles body and structure are usually assembled by resistance spot welding process. The weak points of this process are the poor surface quality and bad airtight due to the pressure of electrodes. In this study, the partial penetration lap laser welding process was investigated to resolve the problems, by controlling the laser to stop at the second plate in the appropriate penetration. The lap laser welding joint of stainless steel railway vehicle car body with partial penetration has higher strength and surface quality than those of resistance spot welding joint. The biggest problem of lap laser welding technology is to find the balance of the strength and surface quality with different penetrations. The mechanism of overlap laser welding of stainless steel, mechanical tests, microstructure analysis, the optimization of welding parameters, analysis of fatigue performance, the design of laser welding stainless steel railway vehicles structure and the development of non-destructive testing technology were systematically studied before lap laser welding process to be applied in manufacture of railway vehicles. The results of the experiments and study show that high-quality surface state and higher fatigue strength can be achieved by the partial penetration overlap laser welding of the side panel structure, and the structure strength of the car body can be higher than the requirements of En12663, the standard of structural requirements of railway vehicles bodies. Our company has produced the stainless steel subway and high way railway vehicles by using overlap laser welding technology. The application of lap laser welding will be a big

Noise-induced hearing loss in a longitudinal study of Norwegian railway workers

PubMed Central

Lie, Arve; Skogstad, Marit; Johnsen, Torstein Seip; Engdahl, Bo; Tambs, Kristian

2016-01-01

Objective The aim of this study was to analyse longitudinal data to assess the risk of noise-induced hearing loss (NIHL) in Norwegian railway workers. Design Longitudinal. Setting A major Norwegian railway company. Methods We examined data from the first and last audiograms for the period 1991–2014, from 9640 railway workers with varying occupational noise exposure and with an average observation period of 10 years. The course of hearing acuity in seven groups of railway workers (train drivers, conductors, bus drivers, traffic controllers, train maintenance workers, track maintenance workers and others) were compared with each other and with ISO standards (ISO 1999). Results The change in hearing threshold during the observation period was 2–3 dB in the 0.5–4 kHz range and 6–7 dB in the 3–6 kHz range adjusted for age and sex, for all occupational groups, which is slightly less than expected (8 dB) according to ISO 1999. Conclusions The risk of NIHL in Norwegian railway workers during the period 1991–2014 has been negligible. PMID:27591022

Experimental analysis of a high-speed railway bridge under Thalys trains

NASA Astrophysics Data System (ADS)

Xia, H.; De Roeck, G.; Zhang, N.; Maeck, J.

2003-11-01

In this paper dynamic experiments on the Antoing Bridge located on the high-speed railway line between Paris and Brussels are reported. The experiments were co-operatively carried out by the Northern Jiaotong University from China, the Catholic University of Leuven, the Free University of Brussels and the Belgium Railway Company NMBS-SNCB from Belgium. The bridge is composed of multi-span simply supported PC girders with spans of 50 m and U-shaped sections. The loads are the high-speed Thalys trains with articulated vehicles. The speeds of the Thalys trains were between 265 and 310 km/h. In the experiments, the dynamic responses of the bridge such as the deflections, the accelerations and the strains that were measured by a laser velocity displacement transducer accelerometers and strain gauges, respectively. Many useful results have been obtained from the analysis of the recorded data. The tests and the measured results can be a reference for the study and the design of high-speed railway bridges.

A PROPOSAL FOR MAKING A RISK MAP OF ROCKFALL BY EVALUATING THE INFLUENCE TO RAILWAY TRACK

NASA Astrophysics Data System (ADS)

Fukata, Takahiro; Mori, Taiki; Shibuya, Satoru

An incident of rockfall may trigger serious damage to the safety as well as the after-the-event maintenance of railway transportation. In an attempt to minimize such damage caused by rockfall incident, the railway companies regularly in spect the concerned slopes along the railway, and take necessary measures. In the current practice, however, it is very difficult to make a full control of slopes in danger spreading over the wide area due to the limited human and financial resources. Accordingly, it is urgently needed for the railway firms to establish cost-effective as well as reliable system for the slope management. A risk map based on the impact statement of rockfall to railway track is of great use for not only enhancing the efficiency of slope inspection, but also planning the disaster prevention of railway. In this paper, a methodology for establishing a risk map by considering the impact statement to railway truck in a quantitative manner is proposed. In so doing, the rockfall movement on a slope was numerically simulated in match with each categorized type of slopes. The applicability of this proposed method for the slope management practice is examined based on a number of case histories.

Railway noise annoyance on the railway track in northwest slovakia.

PubMed

Pultznerova, Alzbeta; Eva, Panulinova; Kucharova, Daniela; Argalasova, Lubica

2018-01-01

This paper describes an assessment of noise caused by railway traffic in a large high-loaded railway track in Northwest Slovakia. The measurements of noise levels generated by trains passing through residential neighborhoods were taken. Noise maps were also calculated showing noise pollution generated by the train traffic. In addition, the annoyance level and sleep disturbance of residents affected by railway noise were evaluated by a validated questionnaire on a pilot sample of 107 respondents living near the important railway track. The measurements indicated that the noise levels generated by the passage of the train were extremely high especially at night, clearly exceeding the nighttime limits of equivalent sound pressure level established by the Decree of the Slovak Ministry of Health (No.549/2007) (L Aeq  = 55 dB). Measurements at one point during the night exceeded the limit values of up to 17.4 dB. The residents reported feeling affected by the noise generated by passing trains, which caused irritability, headache, poor concentration, and insomnia. In addition, 19.64% of the residents claimed that nocturnal noise pollution was the most distressing. The results of bivariate analysis showed a higher risk of annoyance especially for railway noise [OR MH  = 7.80 (4.02-15.14)] and the noise from industry [OR MH  = 3.08 (1.72-5.50)] in the exposed location. The effects of railway traffic on annoyance/sleep and psychosocial well-being were evaluated in a few studies. In accordance with our results the railway noise mostly disturbs sleep and rest of the respondents. The pilot survey showed the importance of sleep and rest disturbance by railway noise and the possibilities of getting worse health condition in the future. Noise abatement measures and strategies should, therefore, be implemented in an effective and manageable way increasing the environmental advantages of rail transport.

Railway Noise Annoyance on the Railway Track in Northwest Slovakia

PubMed Central

Pultznerova, Alzbeta; Eva, Panulinova; Kucharova, Daniela; Argalasova, Lubica

2018-01-01

Introduction: This paper describes an assessment of noise caused by railway traffic in a large high-loaded railway track in Northwest Slovakia. Materials and Methods: The measurements of noise levels generated by trains passing through residential neighborhoods were taken. Noise maps were also calculated showing noise pollution generated by the train traffic. In addition, the annoyance level and sleep disturbance of residents affected by railway noise were evaluated by a validated questionnaire on a pilot sample of 107 respondents living near the important railway track. Results: The measurements indicated that the noise levels generated by the passage of the train were extremely high especially at night, clearly exceeding the nighttime limits of equivalent sound pressure level established by the Decree of the Slovak Ministry of Health (No.549/2007) (L Aeq = 55 dB). Measurements at one point during the night exceeded the limit values of up to 17.4 dB. The residents reported feeling affected by the noise generated by passing trains, which caused irritability, headache, poor concentration, and insomnia. In addition, 19.64% of the residents claimed that nocturnal noise pollution was the most distressing. The results of bivariate analysis showed a higher risk of annoyance especially for railway noise [ORMH = 7.80 (4.02–15.14)] and the noise from industry [ORMH = 3.08 (1.72–5.50)] in the exposed location. Discussion: The effects of railway traffic on annoyance/sleep and psychosocial well-being were evaluated in a few studies. In accordance with our results the railway noise mostly disturbs sleep and rest of the respondents. Conclusion: The pilot survey showed the importance of sleep and rest disturbance by railway noise and the possibilities of getting worse health condition in the future. Noise abatement measures and strategies should, therefore, be implemented in an effective and manageable way increasing the environmental advantages of rail

Space Weather Effects on Mid-Latitude Railways: a Statistical Study of Anomalies observed in the Operation of Signaling and Train Control Equipment on the East-Siberian Railway

NASA Astrophysics Data System (ADS)

Kasinskii, V. V.; Ptitsyna, N. G.; Lyahov, N. N.; Dorman, L. I.; Villoresi, G.; Iucci, N.

The end result of a long chain of space weather events beginning on the Sun is the induction of currents in ground-based long conductors as power lines pipelines and railways Intense geomagnetically induced currents GIC can hamper rail traffic by disturbing signaling and train control systems In few cases induced voltages were believed to have affected signaling equipment in Sweden Jansen et al 2000 and in the North of Russia Belov et al 2005 GIC threats have been a concern for technological systems at high-latitude locations due to disturbances driven by electrojet intensifications However other geomagnetic storm processes such as SSC and ring current enhancement can also cause GIC concerns for the technological systems Objective of this report is to continue our research Ptitsyna et al 2005 on possible influence of geomagnetic storms on mid-latitude railways and to perform a statistical research in addition to case studies This will help in providing a basis for railway companies to evaluate the risk of disruption to signaling and train control equipment and devise engineering solutions In the present report we analyzed anomalies in operation of automatic signaling and train control equipment occurred in 2004-2005 on the East-Siberian Railway located at mid-latitudes latitudes 51N-56N longitudes 96E-114E The anomalies consist mainly in unstable functioning and false operations in traffic automatic control systems rail chain switches locomotive control devices etc often resulting in false engagement of railway

Color Vision and the Railways: Part 1. The Railway LED Lantern Test.

PubMed

Dain, Stephen J; Casolin, Armand; Long, Jennifer; Hilmi, Mohd Radzi

2015-02-01

Lantern tests and practical tests are often used in the assessment of prospective railway employees. The lantern tests rarely embody the actual colors used in signaling on the railways. Practical tests have a number of problems, most notably consistency of application and practicability. This work was carried out to provide the Railway LED Lantern Test (RLLT) as a validated method of assessing the color vision of railway workers. The RLLT, a simulated practical test using the same LEDs (light-emitting diodes) as are used in modern railway signals, was developed. It was tested on 46 color vision-normal (CVN) and 37 color vision-deficient (CVD) subjects. A modified prototype was then tested on 106 CVN subjects. All 106 CVN subjects and most mildly affected CVD subjects passed the modified lantern at 3 m. At 6 m, 1 of the 106 normal color vision subjects failed by missing a single red light. All the CVD subjects failed. The RLLT carried out at 3 m allowed mildly affected CVD subjects to pass and demonstrate adequate color vision for the less demanding railway tasks. Carried out at 6 m, it essentially reinforced normal color vision as the standard. The RLLT is a simply administered test that has a direct link to the actual visual task of the rail worker. The RLLT lantern has been adopted as an approved test in the Australian National Standard for Health Assessment of Rail Safety Workers in place of a practical test. It has the potential to be a valid part of any railway color vision standard.

76 FR 31678 - San Luis & Rio Grande Railroad-Continuance in Control Exemption-Saratoga and North Creek Railway...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-01

... Hudson Railway Company, Inc, d/b/a Canadian Pacific (CP) a permanent and exclusive freight rail easement... interchange with CP between Adirondack Branch milepost 39.44 and CP's yard at Saratoga Springs located at...

76 FR 31010 - Iowa Northern Railway Company-Trackage Rights Exemption-Dakota, Minnesota & Eastern Railroad...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-27

... Corporation d/b/a Canadian Pacific (CP) will agree to grant overhead trackage rights to Iowa Northern Railway..., and milepost 116.70 at the connection with CP's Mason City Subdivision, a distance of approximately 20.80 miles; (2) milepost 116.70 at the connection with CP's Mason City Subdivision and milepost 107.30...

76 FR 35508 - Alabama Southern Railroad, L.L.C.-Temporary Trackage Rights Exemption-Norfolk Southern Railway...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-17

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35510] Alabama Southern Railroad, L.L.C.--Temporary Trackage Rights Exemption--Norfolk Southern Railway Company Norfolk Southern... grant nonexclusive overhead temporary trackage rights to Alabama Southern Railroad, L.L.C. (ABS) over a...

Association of occupation, employment contract, and company size with mental health in a national representative sample of employees in Japan.

PubMed

Inoue, Akiomi; Kawakami, Norito; Tsuchiya, Masao; Sakurai, Keiko; Hashimoto, Hideki

2010-01-01

The purpose of this study was to investigate the cross-sectional association of employment contract, company size, and occupation with psychological distress using a nationally representative sample of the Japanese population. From June through July 2007, a total of 9,461 male and 7,717 female employees living in the community were randomly selected and surveyed using a self-administered questionnaire and interview including questions about occupational class variables, psychological distress (K6 scale), treatment for mental disorders, and other covariates. Among males, part-time workers had a significantly higher prevalence of psychological distress than permanent workers. Among females, temporary/contract workers had a significantly higher prevalence of psychological distress than permanent workers. Among males, those who worked at companies with 300-999 employees had a significantly higher prevalence of psychological distress than those who worked at the smallest companies (with 1-29 employees). Company size was not significantly associated with psychological distress among females. Additionally, occupation was not significantly associated with psychological distress among males or females. Similar patterns were observed when the analyses were conducted for those who had psychological distress and/or received treatment for mental disorders. Working as part-time workers, for males, and as temporary/contract workers, for females, may be associated with poor mental health in Japan. No clear gradient in mental health along company size or occupation was observed in Japan.

Human Resources and Corporate Strategy. Technological Change in Banks and Insurance Companies: France, Germany, Japan, Sweden, United States.

ERIC Educational Resources Information Center

Bertrand, Olivier; Noyelle, Thierry

Twelve financial institutions (nine banks and three insurance companies) from five countries (France, West Germany, Japan, Sweden, and the United States) were studied to determine the directions in which financial service markets and firms are moving as a result of increasing competition and technological change. Data were collected from…

77 FR 40147 - Pan Am Southern, LLC.-Abandonment Exemption-in Worcester County, MA; Springfield Terminal Railway...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-06

... (Sub No. 41X)] Pan Am Southern, LLC.--Abandonment Exemption--in Worcester County, MA; Springfield Terminal Railway Company--Discontinuance of Service Exemption--in Worcester County, MA Pan Am Southern, LLC... B. Burns, Corporate Counsel, Iron Horse Park, North Billerica, MA 01862. If the verified notice...

75 FR 2580 - Carolina Coastal Railway, Inc.-Acquisition and Operation Exemption-North Carolina State Ports...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-15

... North Carolina State Ports Authority (SPA) and to operate approximately 0.87 miles of SPA's rail lines... by SPA (or previously owned or leased by North Carolina Ports Railway Commission), in Carteret County... SPA to the PCS Phosphate Company, Inc., rail car dump and the ``Fishmeal'' spur on the area commonly...

27 CFR 28.251 - Railway express receipts.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Railway express receipts... § 28.251 Railway express receipts. Where the exportation is to a contiguous foreign country and the shipment is by railway express, a receipt issued by the railway express agency may be accepted in lieu of...

76 FR 78335 - North Carolina & Virginia Railroad Company, LLC, Chesapeake & Albemarle Railroad Division-Lease...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-16

... Carolina & Virginia Railroad Company, LLC, Chesapeake & Albemarle Railroad Division--Lease Amendment Exemption--Norfolk Southern Railway Company North Carolina & Virginia Railroad, LLC, Chesapeake & Albemarle Railroad Division (NCVR), a Class III carrier, has filed a verified notice of exemption under 49 CFR1150.41...

77 FR 74548 - North Shore Railroad Company-Acquisition and Operation Exemption-PPL Susquehanna, LLC

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-14

... Railroad Company--Acquisition and Operation Exemption--PPL Susquehanna, LLC North Shore Railroad Company...., that PPL Susquehanna, LLC (PPLS), and Allegheny Electric Cooperative, Inc. (AEC), the owners of the... extends to an interchange with Norfolk Southern Railway. North Shore states that it provides the only...

20 CFR 202.13 - Electric railways.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 20 Employees' Benefits 1 2013-04-01 2012-04-01 true Electric railways. 202.13 Section 202.13... THE ACT § 202.13 Electric railways. (a) The Deputy General Counsel will require the submission of information pertaining to the history and operations of an electric railway with a view to determining whether...

20 CFR 202.13 - Electric railways.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 1 2011-04-01 2011-04-01 false Electric railways. 202.13 Section 202.13... THE ACT § 202.13 Electric railways. (a) The Deputy General Counsel will require the submission of information pertaining to the history and operations of an electric railway with a view to determining whether...

20 CFR 202.13 - Electric railways.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 20 Employees' Benefits 1 2012-04-01 2012-04-01 false Electric railways. 202.13 Section 202.13... THE ACT § 202.13 Electric railways. (a) The Deputy General Counsel will require the submission of information pertaining to the history and operations of an electric railway with a view to determining whether...

20 CFR 202.13 - Electric railways.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 20 Employees' Benefits 1 2014-04-01 2012-04-01 true Electric railways. 202.13 Section 202.13... THE ACT § 202.13 Electric railways. (a) The Deputy General Counsel will require the submission of information pertaining to the history and operations of an electric railway with a view to determining whether...

77 FR 34125 - Wisconsin Central Ltd.-Intra-Corporate Family Merger Exemption-Elgin, Joliet and Eastern Railway...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-08

... Ltd.--Intra-Corporate Family Merger Exemption-- Elgin, Joliet and Eastern Railway Company Wisconsin... 49 CFR 1180.2(d)(3) for an intra-corporate family transaction. WCL, a rail carrier, is a wholly owned... transaction, the WCTC family of rail carriers also included WCL, Fox Valley & Western Ltd. (FVW), Sault Ste...

Railway vehicle body structures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1985-01-01

The strength and durability of railway vehicle structures is a major topic of engineering research and design. To reflect this importance the Railway Division of the Institution of Mechanical Engineers organised a conference to discuss all matters relating to railway vehicle design. This book presents the papers discussed in that conference. The contents include: Vehicle body design and the UIC's international contribution; LUL prototype 1986 stock - body structure; vehicle structure for the intermediate capacity transmit system vehicles; car body technology of advanced light rapid transit vehicles; concepts, techniques and experience in the idealization of car body structures for finitemore » element analysis; Calcutta metropolitan railway; design for a lightweight diesel multiple unit body; the design of lightweight inter-city coal structures; the BREL international coach body shell structure; new concepts and design techniques versus material standards; structures of BR diesel electric freight locomotives; structural design philosophy for electric locomotives; suspension design for a locomotive with low structural frequencies; freight wagon structures; a finite element study of coal bodyside panels including the effects of joint flexibility; a fresh approach to the problem of car body design strength; energy absorption in automatic couplings and draw gear; passenger vehicle design loads and structural crashworthiness; design of the front part of railway vehicles (in case of frontal impact); the development of a theoretical technique for rail vehicle structural crashworthiness.« less

[Preventive measures against tuberculosis in working facilities and companies].

PubMed

Suzuki, Kiminori; Satou, Ken

2007-03-01

The health care program in working facilities and companies have played a significant part in prevention of tuberculosis. However, the ordinary national tuberculosis survey policy was abolished in April, 2005 and the tuberculosis survey for salary-earners is on the brink of drastic change. In this symposium the current status of the prevailing survey of tuberculosis in working facilities and companies was reviewed and the future direction of the tuberculosis survey in comparison to that in lung cancer survey was discussed. 1. Epidemiological trends of tuberculosis from the tuberculosis surveillance data: Masako OHMORI (Research Institute of Tuberculosis, Japan Anti-Tuberculosis Association). The estimated rate of tuberculosis case discovery by periodical mass screening in the working facilities was 0.033% and it was higher than that in general adult population. The detection rate of tuberculosis in nurses who suffered from tuberculosis reached 40.4% by an aid of mass X-ray screening and 8.7% by contact tracing. The risk of onset of the disease was 4.3 times higher nurses than in general at the same years of age. The importance of infection control measures in the medical facilities was emphasized. 2. Current status and problems in tuberculosis control in a large-sized company: Yusuke NAKAOKA (Department of Occupational Health, Osaka Railway Hospital, West Japan Railway Company). Some preventive modalities against TB such as periodical medical check-up and awareness programs have been done for the purpose of prevention in our company. The prevalence of the disease has significantly reduced in number. The specific circumstances in large-sized company should be taken into consideration, and it is important for company workers and health professionals to recognize their roles in preventing the infectious disease. 3. Are there any differences between clinical cases and control people working for small-sized companies in the onset of tuberculosis?: Osamu NAKASHIMA, Kohei

77 FR 67442 - Northern Plains Railroad, Inc.-Temporary Trackage Rights Exemption-Soo Line Railroad Company

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-09

... Railroad, Inc.--Temporary Trackage Rights Exemption--Soo Line Railroad Company Soo Line Railroad Company... overhead trackage rights to Northern Plains Railroad, Inc. (NPR) between milepost 128.9 at Mahnomen, Minn... by the conditions imposed in Norfolk and Western Railway--Trackage Rights--Burlington Northern, Inc...

Recent cryocooler progress in Japan

NASA Technical Reports Server (NTRS)

Matsubara, Y.

1985-01-01

The progress of cryocoolers and related devices in Japan is reviewed. The Japanese National Railways has developed the light weight 4 K on-board refrigerators since 1977 as part of the MAGLEV train program. Superconducting and cryogenic fundamental technology was examined which included high performance cryocooler, magnetic refrigerator and superfluid refrigeration. Space cryogenics such as the cooling systems of IR-detectors was studied. Cryocooler for special applications such as cryopump, NMR-CT and JJ devices was investigated. Compact heat exchangers, high performance regenerators and reliable compressors are investigated as a critical component technology.

Meteorological tools in support to the railway security system on the Calabria region

NASA Astrophysics Data System (ADS)

Laviola, Sante; Gabriele, Salvatore; Iovine, Giulio; Baldini, Luca; Chiravalloti, Francesco; Federico, Stefano; Miglietta, Marcello Mario; Milani, Lisa; Procopio, Antonio; Roberto, Nicoletta; Tiesi, Alessandro; Agostino, Mario; Niccoli, Raffaele; Stassi, Sergio; Rago, Valeria

2017-04-01

RAMSES (RAilway Meteorological SEcurity System) is a pilot project co-funded by the Italian Railway Company - RFI S.p.A. and conceived for the mitigation of the hydrological risk along the Calabria railways. RAMSES aims at improving the forecast of very short life-cycle convection systems, responsible of intense and localized rainfalls affecting small catchment areas, which are often underestimated by the numerical weather models and even non-adequately detected by the network of sparse raingauges. The RAMSES operational design is based on a synergistic and integrated architecture, providing a series of information able to identify the most active convective cells and monitoring their evolution in terms of vertical structure, rain intensity and geo-hydrological effects at ground (debris flow, landslides, collapses of bridges, erosion of the ballast). The RAMSES meteorological component is designed to identify and track the short-term evolution (15-60 min) of convective cells, by means of imaging techniques based on dual-polarization weather radar and Meteosat data. In support of this quasi-real time analysis, the numerical model WRF provides the weather forecast at 3-6 hours range by ingesting, through the assimilation system LAPS, the observational data (rain gauges, ground weather stations, radar, satellites) in order to improve the initial condition. Finally, the hydraulic flow modeling is used to assess the ground effects in terms of landslide susceptibility, rainfall-runoff intensity, debris impact on the drainage network and evaluate of risk along the railway track.

[Research on China railway health campaign in 1930s].

PubMed

Huang, Huaping

2015-01-01

The motivation factors of China's railway health campaign in 1930s included avocation by the government, mass media mobilization, railway authorities' hygiene awareness and the systematization of the construction of organization. During the health campaign, the railway authorities adopted various approaches for its formation, including the rally speeches, distribution of materials, cleaning and vaccination etc. Unfortunately, the actual effect of railway health campaign was not satisfactory, yet, it enhanced theoretically railway employees' health knowledge and contributed to the promotion of modernization of hygienic knowledge. Meanwhile, there still existed many problems in the railway health campaign, for example, lack of funds, formalism and uneven development among the railway bureaus.

Railway safety climate: a study on organizational development.

PubMed

Cheng, Yung-Hsiang

2017-09-07

The safety climate of an organization is considered a leading indicator of potential risk for railway organizations. This study adopts the perceptual measurement-individual attribute approach to investigate the safety climate of a railway organization. The railway safety climate attributes are evaluated from the perspective of railway system staff. We identify four safety climate dimensions from exploratory factor analysis, namely safety communication, safety training, safety management and subjectively evaluated safety performance. Analytical results indicate that the safety climate differs at vertical and horizontal organizational levels. This study contributes to the literature by providing empirical evidence of the multilevel safety climate in a railway organization, presents possible causes of the differences under various cultural contexts and differentiates between safety climate scales for diverse workgroups within the railway organization. This information can be used to improve the safety sustainability of railway organizations and to conduct safety supervisions for the government.

Impact of service quality management (SQM) practices on Indian railways : study of South Central Railways.

DOT National Transportation Integrated Search

2010-09-01

The main objective of this study is to present a framework developed for assisting Railways to monitor and : control the quality of services provided to passengers. The study evaluated the passenger Rail Service quality of : Indian Railways by develo...

20 CFR 202.15 - Railway labor organizations.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Railway labor organizations. 202.15 Section... EMPLOYERS UNDER THE ACT § 202.15 Railway labor organizations. Railway labor organizations, national in scope... bylaws of such organizations, shall be employers within the meaning of the act. (a) An organization doing...

78 FR 3497 - KM Railways, LLC-Acquisition and Operation Exemption-DTE Chicago Fuels Terminal, LLC and DTE Coal...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-16

... Southern Railway Company in Chicago, Cook County, Ill.\\3\\ \\1\\ KMR is indirectly owned by noncarrier Koch Industries, Inc. (Koch). In addition to KMR, Koch also controls directly or indirectly three other Class III... Augustine Railroad, LLC), and Koch has sought Board authority to control a fourth Class III rail carrier...

Development of system reliability models for railway bridges.

DOT National Transportation Integrated Search

2012-07-01

Performance of the railway transportation network depends on the reliability of railway bridges, which can be affected by : various forms of deterioration and extreme environmental conditions. More than half of the railway bridges in US were : built ...

Different carcinogenic process in cholangiocarcinoma cases epidemically developing among workers of a printing company in Japan.

PubMed

Sato, Yasunori; Kubo, Shoji; Takemura, Shigekazu; Sugawara, Yasuhiko; Tanaka, Shogo; Fujikawa, Masahiro; Arimoto, Akira; Harada, Kenichi; Sasaki, Motoko; Nakanuma, Yasuni

2014-01-01

Recently, cholangiocarcinoma has epidemically developed among young adult workers of a printing company in Japan. Exposure to organic solvents including 1,2-dichloropropane and/or dichloromethane is supposed to be associated with the carcinoma development. The metabolism of dichloromethane proceeds through a Theta-class glutathione S-transferase (GST) T1-1-catalyzed pathway, where its reactive intermediates have been implicated in genotoxicity and carcinogenicity. This study examined features of the carcinogenic process of the cholangiocarcinoma developed in the printing company. Surgically resected specimens of the cholangiocarcinoma cases were analyzed, where all cases were associated with precursor lesions such as biliary intraepithelial neoplasia (BilIN) and/or intraductal papillary neoplasm of the bile duct (IPNB). Immunohistochemical analysis confirmed constitutional expression of GST T1-1 in normal hepatobiliary tract. Immunostaining of γ-H2AX, a marker of DNA double strand break, showed that its expression was significantly increased in foci of BilIN, IPNB and invasive carcinoma as well as in non-neoplastic biliary epithelial cells of the printing company cases when compared to that of control groups. In the printing company cases, immunohistochemical expression of p53 was observed in non-neoplastic biliary epithelial cells and BilIN-1. Mutations of KRAS and GNAS were detected in foci of BilIN in one out of 3 cases of the printing company. These results revealed different carcinogenic process of the printing company cases, suggesting that the exposed organic solvents might act as a carcinogen for biliary epithelial cells by causing DNA damage, thereby contributing to the carcinoma development.

Individual characteristics in occupational accidents due to imbalance: a case-control study of the employees of a railway company.

PubMed

Gauchard, G C; Chau, N; Touron, C; Benamghar, L; Dehaene, D; Perrin, PhP; Mur, J-M

2003-05-01

Falls are frequent occupational accidents, and are responsible for a significant amount of lost working time and, more importantly, for a high mortality. The factors involved in falling mechanisms can be of external or individual origin, the latter being less well identified. To assess the relations between certain individual characteristics and occupational accidents due to imbalance. A total of 427 male employees, who had been victims of at least one occupational accident with sick leave due to imbalance (cases) and 427 controls were recruited among the employees of a large French railway company. A standardised questionnaire on life conditions and professional factors, and a description of the accidents was filled in by an occupational physician for each subject. Some job categories were more affected by a specific release mechanism of work related falls. Certain individual characteristics such as smoking, alcohol consumption, inactivity, sleep disorders, and request for a job change were correlated with the occurrence of occupational accidents. Sick leaves of eight days or over were more frequent in older and overweight injured workers. Some lesions were linked with the specific fall released mechanisms. Individual characteristics can increase the risk of occupational accidents, especially falling. This study identified subjects most at risk on whom prevention related to working conditions and falls could be focused.

Novel railway-subgrade vibration monitoring technology using phase-sensitive OTDR

NASA Astrophysics Data System (ADS)

Wang, Zhaoyong; Lu, Bin; Zheng, Hanrong; Ye, Qing; Pan, Zhengqing; Cai, Haiwen; Qu, Ronghui; Fang, Zujie; Zhao, Howell

2017-04-01

High-speed railway is being developed rapidly; its safety, including infrastructure and train operation, is vital. This paper presents a railway-subgrade vibration monitoring scheme based on phase-sensitive OTDR for railway safety. The subgrade vibration is detected and rebuilt. Multi-dimension comprehensive analysis (MDCA) is proposed to identify the running train signals and illegal constructions along railway. To our best knowledge, it is the first time that a railway-subgrade vibration monitoring scheme is proposed. This scheme is proved effective by field tests for real-time train tracking and activities monitoring along railway. It provides a new passive distributed way for all-weather railway-subgrade vibration monitoring.

Desing of Digital Calliper for Control of Selected Parameters of Railway Wheels

NASA Astrophysics Data System (ADS)

Ticha, Šarka; Zelnak, Michal; Vavrina, Jan

2014-12-01

This contribution deals with new design of digital calliper for transferring of width dimension scale from the ring interface to tyre of railway wheel. Based on the problem definition were solved variants of design with possibility of improvement current measurement technique. For selected variant of production was developed calibration procedures for ensure of required accuracy. At the end solution that was significantly influenced by economic recession was realized variant for single production. Manufacturer and exclusive supplier of this digital calliper is UNIMETRA Company, Ltd.

The socio-environmental determinants of railway suicide: a systematic review

PubMed Central

2014-01-01

Background Railway suicide has significant adverse impacts for the victims, their family and friends, witnesses to the incident, general public and train network. There is no previous review on the socio-environmental factors and railway suicide. The research question asked in this review was: ‘What socio-environmental risk and protective predictors are significantly associated with railway suicide?’ Methods The review searched Medline, PsycINFO, Web of Science and Scopus for English-language studies that assessed the associations between socio-environmental (i.e. geographical, physical, economic and social) factors and railway suicide from their inception to June 2013. It was reported based on the PRISMA Statement. Results Eleven studies met the inclusion criteria. They were categorised into railway environments (availability of railways and trains, accessibility to railways and familiarity with trains), population characteristics and impact of media reporting. Findings from ecological studies using population level railway suicide data suggested weak and inconsistent evidence for the first two categories. The evidence on the impact of media reporting was moderately strong, with irresponsible media reporting being associated with an increased risk of railway suicide. Conclusions There is a need for further research activity to strengthen evidence about socio-environmental risk factors for railway suicide. The focus of this research should be on the factors that determine individuals’ decisions of using the railway as a method of suicide, with the consideration of a range of geographical, physical, social, and economic factors. PMID:24405530

Annoyance and activity disturbance induced by high-speed railway and conventional railway noise: a contrastive case study.

PubMed

Di, Guo-Qing; Lin, Qi-Li; Li, Zheng-Guang; Kang, Jian

2014-03-07

High-speed railway (HR, Electrified railway with service speed above 200 km/h.) noise and conventional railway (CR, Electrified railway with service speed under 200 km/h.) noise are different in both time and frequency domain. There is an urgent need to study the influence of HR noise and consequently, develop appropriate noise evaluation index and limits for the total railway noise including HR and CR noise. Based on binaural recording of HR and CR noises in a approximate semi-free field, noise annoyance and activity disturbance induced by maximal train pass-by events in China were investigated through laboratory subjective evaluation. 80 students within recruited 102 students, 40 males and 40 females, 23.9 ± 2.1 years old, were finally selected as the subjects. After receiving noise stimulus via headphone of a binaural audio playback system, subjects were asked to express the annoyance or activity disturbance due to railway noise at a 0-100 numerical scale. The results show that with the same annoyance rating (A) or activity disturbance rating (D), the A-weighted equivalent sound pressure level (LAeq) of CR noise is approximately 7 dB higher than that of HR noise. Linear regression analysis between some acoustical parameters and A (or D) suggests that the coefficient of determination (R2) is higher with the instantaneous fast A-weighted sound pressure level (LAFmax) than that with LAeq. A combined acoustical parameter, LHC = 1.74LAFmax + 0.008LAFmax(Lp-LAeq), where Lp is the sound pressure level, was derived consequently, which could better evaluate the total railway noise, including HR and CR noise. More importantly, with a given LHC, the noise annoyance of HR and CR noise is the same. Among various acoustical parameters including LHC and LAeq, A and D have the highest correlation with LHC. LHC has been proved to be an appropriate index to evaluate the total railway noise, including both HR and CR. However, it should be pointed out that this study provides

Annoyance and activity disturbance induced by high-speed railway and conventional railway noise: a contrastive case study

PubMed Central

2014-01-01

Background High-speed railway (HR, Electrified railway with service speed above 200 km/h.) noise and conventional railway (CR, Electrified railway with service speed under 200 km/h.) noise are different in both time and frequency domain. There is an urgent need to study the influence of HR noise and consequently, develop appropriate noise evaluation index and limits for the total railway noise including HR and CR noise. Methods Based on binaural recording of HR and CR noises in a approximate semi-free field, noise annoyance and activity disturbance induced by maximal train pass-by events in China were investigated through laboratory subjective evaluation. 80 students within recruited 102 students, 40 males and 40 females, 23.9 ± 2.1 years old, were finally selected as the subjects. After receiving noise stimulus via headphone of a binaural audio playback system, subjects were asked to express the annoyance or activity disturbance due to railway noise at a 0-100 numerical scale. Results The results show that with the same annoyance rating (A) or activity disturbance rating (D), the A-weighted equivalent sound pressure level (LAeq) of CR noise is approximately 7 dB higher than that of HR noise. Linear regression analysis between some acoustical parameters and A (or D) suggests that the coefficient of determination (R2) is higher with the instantaneous fast A-weighted sound pressure level (LAFmax) than that with LAeq. A combined acoustical parameter, LHC = 1.74LAFmax + 0.008LAFmax(Lp-LAeq), where Lp is the sound pressure level, was derived consequently, which could better evaluate the total railway noise, including HR and CR noise. More importantly, with a given LHC, the noise annoyance of HR and CR noise is the same. Conclusions Among various acoustical parameters including LHC and LAeq, A and D have the highest correlation with LHC. LHC has been proved to be an appropriate index to evaluate the total railway noise, including both HR and CR. However

[Achievements and prospects in railway transport hygiene].

PubMed

Kaptsov, V A

1997-01-01

A unique Institute of Railway Hygiene was created 70 years ago in Russia, one of the major railway countries in the world. Since then the Institute's staffers have carried out huge work on improvement of railway workers' health, prevention of their exposure to noise, unfavorable microclimate, vibration and other occupational hazards. Significant contribution into the world occupational hygiene was made by such Institute's professionals as S.F. Kazansky, P.I. Nikitin, A.M. Volkov and others.

[Emergency response management near the tracks of the public railway network: special aspects of missions connected with the German national railway system].

PubMed

Krämer, P; Aul, A; Vock, B; Frank, C

2010-11-01

Emergency response management and rescue operations concerning the railway network in Germany need special attention and implementation in several ways. The emergency response concerning the German national railway network managed by Deutsche Bahn AG is subject to various rules and regulations which have to be followed precisely. Only by following these rules and procedures is the safety of all emergency staff at the scene ensured. The German national railway network (Deutsche Bahn AG) provides its own emergency response control center, which specializes in managing its response to emergencies and dispatches an emergency response manager to the scene. This person serves as the primary Deutsche Bahn AG representative at the scene and is the only person who is allowed to earth the railway electrical power lines. This article will discuss different emergency situations concerning railway accidents and the emergency medical response to them based on a near collision with a high speed train during a rescue mission close to the railway track. Injury to personnel could only be avoided by chance and luck. The dangers and risks for rescue staff are specified. Furthermore, the article details practical guidelines for rescue operations around the German national railway track system.

Reactions to railway noise in Denmark

NASA Astrophysics Data System (ADS)

Andersen, T. V.; Kühl, K.; Relster, E.

1983-03-01

People's reactions to railway noise were studied along seven Danish railway lines with traffic intensities from 30 to about 300 trains per 24 hours. The calculated sound levels varied between 43 and 71 dB(A) for LAeq,24h and between 78 and 102 sB(A) for LAmax . 615 persons were interviewed. One third of these felt strongly or somewhat annoyed by the railway noise. The relations between the noise level and the extent of annoyance or various kinds of behaviour (telephone conversation, TV-listening, opening of windows, sleep, etc.) were found. The relations were found for both LAeq,24h and LAmax , but the correlation for LAmax is generally bad. Noise in the evenings was found to be more annoying than noise in other daytime periods. More than half of the interviewees answered that goods trains especially were a problem. People exposed to noise at their place of work seem to feel more annoyed by railway noise than other people.

DC Cable for Railway

NASA Astrophysics Data System (ADS)

Tomita, Masaru

The development of a superconducting cable for railways has commenced, assuming that a DC transmission cable will be used for electric trains. The cable has been fabricated based on the results of current testing of a superconducting wire, and various evaluation tests have been performed to determine the characteristics of the cable. A superconducting transmission cable having zero electrical resistance and suitable for railway use is expected to enhance regeneration efficiency, reduce power losses, achieve load leveling and integration of sub-stations, and reduce rail potential.

75 FR 21146 - Union Pacific Railroad Company-Trackage Rights Exemption-BNSF Railway Company

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-22

...--Burlington N., Inc., 354 I.C.C. 605 (1978), as modified in Mendocino Coast Ry.--Lease and Operate--Cal. W. R... pleading must be served on Mack H. Shumate, Jr., Senior General Attorney, Union Pacific Railroad Company... Web site at `` http://www.stb.dot.gov .'' Decided: April 19, 2010. By the Board, Rachel D. Campbell...

Characteristics of suicide hotspots on the Belgian railway network.

PubMed

Debbaut, Kevin; Krysinska, Karolina; Andriessen, Karl

2014-01-01

In 2004, railway suicide accounted for 5.3% of all suicides in Belgium. In 2008, Infrabel (Manager of the Belgian Railway Infrastructure) introduced a railway suicide prevention programme, including identification of suicide hotspots, i.e., areas of the railway network with an elevated incidence of suicide. The study presents an analysis of 43 suicide hotspots based on Infrabel data collected during field visits and semi-structured interviews conducted in mental health facilities in the vicinity of the hotspots. Three major characteristics of the hotspots were accessibility, anonymity, and vicinity of a mental health institution. The interviews identified several risk and protective factors for railway suicide, including the training of staff, introduction of a suicide prevention policy, and the role of the media. In conclusion, a comprehensive railway suicide prevention programme should continuously safeguard and monitor hotspots, and should be embedded in a comprehensive suicide prevention programme in the community.

An economic evaluation of setting up physical barriers in railway stations for preventing railway injury: evidence from Hong Kong.

PubMed

Law, C K; Yip, P S F

2011-10-01

Setting physical barriers, for example platform screen doors (PSDs), has been proven to be effective in preventing falls onto railway tracks, but its cost-effectiveness is not known. For economic evaluation of public health interventions, the importance of including non-health factors has been noted despite a lack of empirical studies. This study aimed to investigate the effectiveness and cost-effectiveness of PSDs, which are installed in part of the Hong Kong railway system, for preventing railway injuries. Data on railway injuries from 1997 to 2007 were obtained from the railway operators. Poisson regression was used to examine the risk reduction. Two incremental cost-effectiveness ratios (ICER) were calculated to assess the cost-effectiveness based on (1) disability-adjusted life years (DALYs) only and (2) DALYs with potential fare revenue and passengers' waiting time lost due to railway circulation collapse. The PSD installation has effectively reduced railway injuries (adjusted 5-year average percentage change: -68.8%, p<0.0001) with no apparent substitution effect to the other platforms observed. To be cost-effective, the cost of gaining a healthy life year (ICER) should not exceed three times the per capita GDP (US$74,700). The PSD installation would only be cost-effective if the loss of fare revenue and passengers' waiting time, in addition to DALY, were included (ICER: US$65,400), while the ICER based on DALY only would be US$77,900. The challenges of complexity for economic evaluation appear in many community-based health interventions. A more extensive perspective for exploring other outcome measurements and evaluation methods to reflect a fair and appropriate value of the intervention's cost-effectiveness is needed.

Connecting Japanese Companies with Global Ventures. Case Study

ERIC Educational Resources Information Center

Kuwahara, Yutaka

2004-01-01

After more than 13 years of business slump in Japan and worldwide, many high-tech companies are struggling to remain competitive. Faced with the need to stay profitable, a common response of such companies in Japan has been to cut their investment in R&D. Heavy cuts in R&D have led to a lack of innovation, with the associated threat to future…

A Mathematical Model for Railway Control Systems

NASA Technical Reports Server (NTRS)

Hoover, D. N.

1996-01-01

We present a general method for modeling safety aspects of railway control systems. Using our modeling method, one can progressively refine an abstract railway safety model, sucessively adding layers of detail about how a real system actually operates, while maintaining a safety property that refines the original abstract safety property. This method supports a top-down approach to specification of railway control systems and to proof of a variety of safety-related properties. We demonstrate our method by proving safety of the classical block control system.

The effects of railway transportation on the enrichment of heavy metals in the artificial soil on railway cut slopes.

PubMed

Chen, Zhaoqiong; Wang, KeXiu; Ai, Ying Wei; Li, Wei; Gao, Hongying; Fang, Chen

2014-02-01

Heavy metal contamination in the artificial soils on the railway cut slopes may have great influence on the revegetation of the cut slopes. The purpose of this study was to assess the variation of heavy metal contamination levels with railway operation time and analyze their possible resources. A total of 100 soil samples from four cut slopes, which were affected by railway transportation for different years, were analyzed for metal pollution (Cd, Pb, Cr, Cu, Zn, Fe). The concentrations of Cd, Pb showed increasing trend with increasing operation time of railways, while such trend was not found in Cr, Cu, Zn, Fe. According to the soil quality standard of China, Cd was considered to have considerable contamination, while Pb has less, but Cr, Cu, Zn, Fe have none. Moreover, cadmium exhibited remarkably higher levels rather than those reported in other studies. Enrichment factors and ecological index showed that Cd and Pb showed a moderate enrichment and a considerable ecological risk in most of the soil samples. The results of descriptive statistic, principal component analysis, cluster analysis and correlation analysis were totally consistent with each other. Their results revealed that Cr, Cu, Zn and Fe had common origins, and they may come from natural resources. While Cd and Pb were significantly influenced by railway transportation, leaked cargos, fuel combustion, the use of lubricate oils and sleeper impregnation oils during railway transportation may be their main resources.

Railway tunnels in Europe and North America

DOT National Transportation Integrated Search

2002-05-01

This list of railway tunnels (longer than 1, 000 m) was compiled by the secretariat from various national and international sources. The list is intended to serve as a reference inventory for a long railway tunnels in Europe and North America. Tunnel...

Roads, railways, and childhood cancers

PubMed Central

Knox, E G

2006-01-01

Study objectives To locate geographical sources of engine exhaust emissions in Great Britain and to link them with the birth addresses of children dying from cancer. To estimate the cancer initiating roles of nearby roads and railways and to measure effective ranges. Design Birth and death addresses of all children born between 1955 and 1980 in Great Britain, and dying from leukaemia or other cancer during those years, were linked to locations of railway stations, bus stations, ferry terminals, railways, roads, canals, and rivers. Nearest distances to births and deaths were measured, and migration data relating to children who had moved house were analysed. Excesses of close to hazard birth addresses, compared with close to hazard death addresses, indicate a high prenatal or early postnatal risk of cancer initiation. Setting and subjects Child cancer birth and death addresses and their map references were extracted from an earlier inquiry. Map references of putative hazards were downloaded from the Ordnance Survey national digital map of Great Britain. These data are recorded to a precision of one metre and have ground accuracies around 20 metres. Main results Significant birth excesses were found within short distances of bus stations, railway stations, ferries, railways, and A,B class roads, with a relative risk of 2.1 within 100 m, tapering to neutral after 3.0 km. About 24% of child cancers were attributable to these joint birth proximities. Roads exerted the major effect. Conclusions Child cancer initiations are strongly determined by prenatal or early postnatal exposures to engine exhaust gases, probably through maternal inhalation and accumulation of carcinogens over many months. The main active substance is probably 1,3‐butadiene. PMID:16415262

Evaluation of railway transportation efficiency based on super-cross efficiency

NASA Astrophysics Data System (ADS)

Kuang, Xiuyuan

2018-01-01

The efficiency of railway transportation is an important index. It can measure the development of railway transportation enterprises, and the efficiency of railway transportation has become a hot issue in the study of railway development. Data envelopment analysis (DEA) has been widely applied to railway efficiency analysis. In this paper, BBC model and super-cross efficiency model are constructed by using DEA theory, taking the 18 Railway Bureau as the research object, with the mileage, the number of employees, locomotive number, average daily loading number as input indicators, the passenger turnover, freight turnover and transport income as output indicators, then calculated and evaluated comprehensive efficiency, pure technical efficiency and scale efficiency. We get that the super-cross efficiency is more in line with the actual situation. Getting the super-cross efficiency is more in line with the actual situation.

Acoustic energy propagation around railways

NASA Astrophysics Data System (ADS)

Cizkova, Petra

2017-09-01

The article deals with the issues of acoustic energy propagation around railways. The research subject was noise emission spreading into the surroundings during the passage of trains over a directly travelled steel bridge construction. Noise emissions were measured using direct measurements in the field. The measurements were performed in two measurement profiles. The noise exposures A LAE measured near the steel bridge construction were compared against the noise exposures A LAE captured on an open track. From the difference of these data, the noise level of the steel bridge structure was determined. Part of the research was to evaluate the effect of the reconstruction of the railway track superstructure on the acoustic situation in the given section of the railway track. The article describes the methodology of measurements, including the processing and evaluation of measured data. The article points out the noise levels of the steel bridge construction and assesses changes in the acoustic situation after the reconstruction.

Alternative Fuels Data Center: New Hampshire Railway Makes Tracks With

Science.gov Websites

Biodiesel New Hampshire Railway Makes Tracks With Biodiesel to someone by E-mail Share Alternative Fuels Data Center: New Hampshire Railway Makes Tracks With Biodiesel on Facebook Tweet about Alternative Fuels Data Center: New Hampshire Railway Makes Tracks With Biodiesel on Twitter Bookmark

Innovative Railway Stations

NASA Astrophysics Data System (ADS)

Rzepnicka, Sylwia; Załuski, Daniel

2017-10-01

In relation to modern demographic trends, evolving technologies and environment-friendly solutions increases the potential of rail considered as sustainable form of public transport. Contemporary tendencies of designing railway stations in Europe are focused on lowering energy consumption and reducing carbon emission. The main goal of the designers is to create a friendly and intuitive space for its users and at the same time a building that uses renewable energy sources and minimizes negative impact on the environment by the increase of biologically active areas, reuse of rainwater and greywater, innovative heating and cooling solutions and reduction of energy losses. The optimisation of a life circle in railway architecture introduces new approach to passenger service. Examples mentioned in the content of this article help to synthesize changes in approach to the design within the context of sustainability.

Current State of European Railway Fire Safety Research

DOT National Transportation Integrated Search

1985-06-01

This report describes the recent fire safety research and practical fire experience of the major European railways. It includes a summary of the main causes and characteristics of railway vehicle fires, general approaches to the problem, and existing...

Comparison of Annoyance from Railway Noise and Railway Vibration.

PubMed

Ögren, Mikael; Gidlöf-Gunnarsson, Anita; Smith, Michael; Gustavsson, Sara; Persson Waye, Kerstin

2017-07-19

The aim of this study is to compare vibration exposure to noise exposure from railway traffic in terms of equal annoyance, i.e., to determine when a certain noise level is equally annoying as a corresponding vibration velocity. Based on questionnaire data from the Train Vibration and Noise Effects (TVANE) research project from residential areas exposed to railway noise and vibration, the dose response relationship for annoyance was estimated. By comparing the relationships between exposure and annoyance for areas both with and without significant vibration exposure, the noise levels and vibration velocities that had an equal probability of causing annoyance was determined using logistic regression. The comparison gives a continuous mapping between vibration velocity in the ground and a corresponding noise level at the facade that are equally annoying. For equivalent noise level at the facade compared to maximum weighted vibration velocity in the ground the probability of annoyance is approximately 20% for 59 dB or 0.48 mm/s, and about 40% for 63 dB or 0.98 mm/s.

Comparison of Annoyance from Railway Noise and Railway Vibration

PubMed Central

Gidlöf-Gunnarsson, Anita; Gustavsson, Sara

2017-01-01

The aim of this study is to compare vibration exposure to noise exposure from railway traffic in terms of equal annoyance, i.e., to determine when a certain noise level is equally annoying as a corresponding vibration velocity. Based on questionnaire data from the Train Vibration and Noise Effects (TVANE) research project from residential areas exposed to railway noise and vibration, the dose response relationship for annoyance was estimated. By comparing the relationships between exposure and annoyance for areas both with and without significant vibration exposure, the noise levels and vibration velocities that had an equal probability of causing annoyance was determined using logistic regression. The comparison gives a continuous mapping between vibration velocity in the ground and a corresponding noise level at the facade that are equally annoying. For equivalent noise level at the facade compared to maximum weighted vibration velocity in the ground the probability of annoyance is approximately 20% for 59 dB or 0.48 mm/s, and about 40% for 63 dB or 0.98 mm/s. PMID:28753921

Opportunity to Save Historical Railway Infrastructure - Adaptation and Functional Conversion of Facilities

NASA Astrophysics Data System (ADS)

Podwojewska, Magdalena

2017-10-01

After years of neglect and underinvestment, the Polish railways are now witnessing a rapid modernization of both their technical facilities and rolling stock. However, this is true only of the main railway lines connecting major urban complexes. It is worth pointing out that a great number of secondary lines, railway stations and halts still has not been covered by the transformation process. Railway facilities, warehouses and service features are in decay. Rapid technological developments have caused numerous architectural structures of historical interest and service features to fall out of use. There are historical railway facilities dating back to the late 19th or early 20th centuries, whose condition is constantly deteriorating. The only way to save these structures is to change the manner, in which they are being used, and attract new investors and operators. The adaptation of buildings may be carried out in a number of ways by following different strategies. The process depends on the structure’s current condition and significance for the railway network. The facilities which are disused as a result of technological changes in the rolling stock and infrastructure include workshops, steam locomotive bays, turntables and warehouses. Their size and location within a city make them a perfect place for commercial services, exhibitions, heritage sites, concerts and other events attracting great numbers of people. Other strategies may be used for constructions located next to railways lines, whose role has declined. Such constructions include small railway stations, warehouses, reloading and forwarding facilities, railway ramps, railway staff buildings as well as residences for railway employees. Railway stations located at large junctions can handle passenger traffic or freight loading operations. As well as acting as the only window to the world, railway stations in small towns housed all the services available in the place. At the same time, they served as

Current and future flood risk to railway infrastructure in Europe

NASA Astrophysics Data System (ADS)

Bubeck, Philip; Kellermann, Patric; Alfieri, Lorenzo; Feyen, Luc; Dillenardt, Lisa; Thieken, Annegret H.

2017-04-01

Railway infrastructure plays an important role in the transportation of freight and passengers across the European Union. According to Eurostat, more than four billion passenger-kilometres were travelled on national and international railway lines of the EU28 in 2014. To further strengthen transport infrastructure in Europe, the European Commission will invest another € 24.05 billion in the transnational transport network until 2020 as part of its new transport infrastructure policy (TEN-T), including railway infrastructure. Floods pose a significant risk to infrastructure elements. Damage data of recent flood events in Europe show that infrastructure losses can make up a considerable share of overall losses. For example, damage to state and municipal infrastructure in the federal state of Saxony (Germany) accounted for nearly 60% of overall losses during the large-scale event in June 2013. Especially in mountainous areas with little usable space available, roads and railway lines often follow floodplains or are located along steep and unsteady slopes. In Austria, for instance, the flood of 2013 caused € 75 million of direct damage to railway infrastructure. Despite the importance of railway infrastructure and its exposure to flooding, assessments of potential damage and risk (i.e. probability * damage) are still in its infancy compared with other sectors, such as the residential or industrial sector. Infrastructure-specific assessments at the regional scale are largely lacking. Regional assessment of potential damage to railway infrastructure has been hampered by a lack of infrastructure-specific damage models and data availability. The few available regional approaches have used damage models that assess damage to various infrastructure elements (e.g. roads, railway, airports and harbours) using one aggregated damage function and cost estimate. Moreover, infrastructure elements are often considerably underrepresented in regional land cover data, such as

Study of occupational stress among railway engine pilots

PubMed Central

Kumar, Devesh; Singh, Jai Vir; Kharwar, Poonam S.

2011-01-01

Background: Traffic volume and speed is going to be increased in Indian Railways successively, leading to higher stress in staff connected with train operations. The jobs of railway engine pilots come under the category of high-strain jobs, necessitating a need to conduct multicentric study to unfold the factors associated with occupational stress and organizational strategies. Materials and Methods: Present study covered 185 railway engine pilots and office clerks working in various railway zones by incidental method. Occupational Stress Index (OSI) test developed by Srivastva and Singh, questionnaire of specific stressors constructed by authors and laboratory test battery for psychological screening of high-speed train pilots were used as tools. Results: Means of OSI and all the 12 occupational stressors of railway engine pilots were found significantly higher to that of office clerks. Means of OSI and occupational stressors of goods train pilots were significantly higher in comparison to high-speed train pilots and passenger train pilots. Study revealed positive correlation of speed perception and complex reaction time tests and negative correlation of other constituent tests of laboratory test battery to OSI test. Highest subgroup of stressor observedwas role overload followed by role conflict. Conclusions: These findings provide a prima facie evidence of higher occupational stress among railway engine pilots because of identified specific stressors prevalent in their job and explore the possible intervention strategies for its reduction. Significant correlation is noticed between OSI and laboratory test results, indicating its relevant utility in preliminary psychological screening. PMID:21808497

Analyzing the causation of a railway accident based on a complex network

NASA Astrophysics Data System (ADS)

Ma, Xin; Li, Ke-Ping; Luo, Zi-Yan; Zhou, Jin

2014-02-01

In this paper, a new model is constructed for the causation analysis of railway accident based on the complex network theory. In the model, the nodes are defined as various manifest or latent accident causal factors. By employing the complex network theory, especially its statistical indicators, the railway accident as well as its key causations can be analyzed from the overall perspective. As a case, the “7.23” China—Yongwen railway accident is illustrated based on this model. The results show that the inspection of signals and the checking of line conditions before trains run played an important role in this railway accident. In conclusion, the constructed model gives a theoretical clue for railway accident prediction and, hence, greatly reduces the occurrence of railway accidents.

Community response to railway noise: A review of social surveys

NASA Astrophysics Data System (ADS)

Moehler, U.

1988-01-01

The many studies on the effects of railway noise on the neighbourhood differ greatly in their design, acoustic and sociological measurement and in their evaluation methods. As the influence of these factors on the sometimes differing results is not quantifiable, only qualitative results can be summarized and commented on. There are only a few studies with special emphasis on the effects of shunting yards, high-speed trains and urban train systems, and therefore only the results concerning free-flow railway traffic are summarized. The LAeq measured outside was shown in almost all the studies to be the most suitable for predicting general annoyance and most of the disturbance reactions compared with other acoustic data, e.g., peak level, pass-by frequency, etc. It is not possible to deduce from the studies in question a limiting value beyond which railway noise is no longer tolerable. Compared to other areas of interference, it is generally agreed that railway noise is at its most annoying in the area of communication. Sleep interference, on the other hand, was only seldomly mentioned and was not considered to be so serious. In addition to the noise level, non-acoustic factors such as attitude towards the railway, neighbourhood environment, etc., obviously considerably affect the annoyance reaction to railway noise too. The question of habituation to railway noise cannot be conclusively answered from the studies analyzed. At the same LAeq, railway noise gives rise to less annoyance than does road-traffic noise. These differences vary according to whether the reference time is day or night, the noise level range is high or low, and according to which annoyance and disturbance reaction is considered.

Railway project design and construction (CEE 411) course updates.

DOT National Transportation Integrated Search

2017-01-20

Course CEE 411 "Railway Project Design and Construction" is a cornerstone of the railway : engineering education program developed by the Rail Transportation and Engineering Center : (RailTEC) at the University of Illinois at Urbana-Champaign (UIUC)....

Develop railway engineering modules in UTK civil engineering undergraduate and graduate courses.

DOT National Transportation Integrated Search

2015-05-31

The importance of railway transport has long been recognized. However, no railway : engineering courses have been provided in the UTK civil engineering curricula. The : objective of this education project is to develop some railway engineering module...

Toward a tobacco-free society in Japan.

PubMed

Tokunaga, H

2001-08-01

Tobacco is one of the major preventable causes of death and disability. This is widely known in both Japan and the USA, and although the smoking rate in the USA is decreasing, that in Japan remains high. The tobacco histories of these two countries, which provide the background to this difference, are herein compared. The antismoking movement is becoming more vociferous in both countries. Publicity regarding of the dangers of smoking, warning signs on tobacco packages, the introduction of antismoking devices, a ban on commercials for tobacco-related products on TV and the radio, no-smoking seats on airplanes, and litigation against the tobacco industry have all been introduced. However, major differences remain between these two countries. The tobacco industry in the USA has been a private company since it was first established. Courts have ordered the tobacco industry to pay compensation for damage to health resulting from tobacco. Smoking is strictly restricted inside buildings. Advertisements for nicotine gum and nicotine patches and reports on the dangers of smoking are regularly broadcast. In the case of Japan, the government at first nationalized the tobacco industry, and then made it a private company, although the government still holds two-thirds of its stock. Moreover, it established the Tobacco Business Law to support the company. The main purpose of antismoking campaigns in Japan is a partial ban on smoking. On the basis of these differences between the two countries regarding the history of tobacco, the antismoking movement in Japan has yet to choose which path to take.

Closing the Circle: Travelling with "The Railway Man."

ERIC Educational Resources Information Center

Murphy, Kevin

2003-01-01

Discusses Eric Lomax's autobiographical book "The Railway Man." Notes how it chronicles his boyhood obsession with train-spotting and the subsequent ways in which his life has been freaked by railway co-incidences. Describes how the author invited Eric Lomax to come and discuss this work with his students. (SG)

Japan-Specific Key Regulatory Aspects for Development of New Biopharmaceutical Drug Products.

PubMed

Desai, Kashappa Goud; Obayashi, Hirokazu; Colandene, James D; Nesta, Douglas P

2018-03-28

Japan represents the third largest pharmaceutical market in the world. Developing a new biopharmaceutical drug product for the Japanese market is a top business priority for global pharmaceutical companies while aligning with ethical drivers to treat more patients in need. Understanding Japan-specific key regulatory requirements is essential to achieve successful approvals. Understanding the full context of Japan-specific regulatory requirements/expectations is challenging to global pharmaceutical companies due to differences in language and culture. This article summarizes key Japan-specific regulatory aspects/requirements/expectations applicable to new drug development, approval, and postapproval phases. Formulation excipients should meet Japan compendial requirements with respect to the type of excipient, excipient grade, and excipient concentration. Preclinical safety assessments needed to support clinical phases I, II, and III development are summarized. Japanese regulatory authorities have taken appropriate steps to consider foreign clinical data, thereby enabling accelerated drug development and approval in Japan. Other important topics summarized in this article include: Japan new drug application-specific bracketing strategies for critical and noncritical aspects of the manufacturing process, regulatory requirements related to stability studies, release specifications and testing methods, standard processes involved in pre and postapproval inspections, management of postapproval changes, and Japan regulatory authority's consultation services available to global pharmaceutical companies. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Railway clearance intrusion detection method with binocular stereo vision

NASA Astrophysics Data System (ADS)

Zhou, Xingfang; Guo, Baoqing; Wei, Wei

2018-03-01

In the stage of railway construction and operation, objects intruding railway clearance greatly threaten the safety of railway operation. Real-time intrusion detection is of great importance. For the shortcomings of depth insensitive and shadow interference of single image method, an intrusion detection method with binocular stereo vision is proposed to reconstruct the 3D scene for locating the objects and judging clearance intrusion. The binocular cameras are calibrated with Zhang Zhengyou's method. In order to improve the 3D reconstruction speed, a suspicious region is firstly determined by background difference method of a single camera's image sequences. The image rectification, stereo matching and 3D reconstruction process are only executed when there is a suspicious region. A transformation matrix from Camera Coordinate System(CCS) to Track Coordinate System(TCS) is computed with gauge constant and used to transfer the 3D point clouds into the TCS, then the 3D point clouds are used to calculate the object position and intrusion in TCS. The experiments in railway scene show that the position precision is better than 10mm. It is an effective way for clearance intrusion detection and can satisfy the requirement of railway application.

Insights into software development in Japan

NASA Technical Reports Server (NTRS)

Duvall, Lorraine M.

1992-01-01

The interdependence of the U.S.-Japanese economies makes it imperative that we in the United States understand how business and technology developments take place in Japan. We can gain insight into these developments in software engineering by studying the context in which Japanese software is developed, the practices that are used, the problems encountered, the setting surrounding these problems, and the resolution of these problems. Context includes the technological and sociological characteristics of the software development environment, the software processes applied, personnel involved in the development process, and the corporate and social culture surrounding the development. Presented in this paper is a summary of results of a study that addresses these issues. Data for this study was collected during a three month visit to Japan where the author interviewed 20 software managers representing nine companies involved in developing software in Japan. These data are compared to similar data from the United States in which 12 managers from five companies were interviewed.

A graph model for preventing railway accidents based on the maximal information coefficient

NASA Astrophysics Data System (ADS)

Shao, Fubo; Li, Keping

2017-01-01

A number of factors influences railway safety. It is an important work to identify important influencing factors and to build the relationship between railway accident and its influencing factors. The maximal information coefficient (MIC) is a good measure of dependence for two-variable relationships which can capture a wide range of associations. Employing MIC, a graph model is proposed for preventing railway accidents which avoids complex mathematical computation. In the graph, nodes denote influencing factors of railway accidents and edges represent dependence of the two linked factors. With the increasing of dependence level, the graph changes from a globally coupled graph to isolated points. Moreover, the important influencing factors are identified from many factors which are the monitor key. Then the relationship between railway accident and important influencing factors is obtained by employing the artificial neural networks. With the relationship, a warning mechanism is built by giving the dangerous zone. If the related factors fall into the dangerous zone in railway operations, the warning level should be raised. The built warning mechanism can prevent railway accidents and can promote railway safety.

View westsouthwest of marine railway at reserve basin of Philadelphia ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View west-southwest of marine railway at reserve basin of Philadelphia Naval Shipyard. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Reserve Basin & Marine Railway, League Island, Philadelphia, Philadelphia County, PA

Stability Analysis of Railway Subgrade in Mining Area Based on Dinsar

NASA Astrophysics Data System (ADS)

Xu, J.; Hu, J.; Ding, J.

2018-04-01

DInSAR technology have been applied to monitor the mining subsidence and the stability of the railway subgrade. A total of 10 Sentinel-1A images acquired from 2015/9/26 to 2016/2/23 were used in DInSAR analysis. The study mining area is about 13.4 km2. Mining have induced serious land subsidence involve a large area that causing different levels of damages to infrastructures on the land. There is an important railway near the mining area, the DInSAR technology is applied to analyse the subsidence near the railway, which can warn early the possible deformation that may occur during underground mining. The DInSAR results was verified by the field measurement. The results show that the mining did not cause subsidence of railway subgrade and did not affect the stability of railway subgrade.

Optimization research of railway passenger transfer scheme based on ant colony algorithm

NASA Astrophysics Data System (ADS)

Ni, Xiang

2018-05-01

The optimization research of railway passenger transfer scheme can provide strong support for railway passenger transport system, and its essence is path search. This paper realized the calculation of passenger transfer scheme for high speed railway when giving the time and stations of departure and arrival. The specific method that used were generating a passenger transfer service network of high-speed railway, establishing optimization model and searching by Ant Colony Algorithm. Finally, making analysis on the scheme from LanZhouxi to BeiJingXi which were based on high-speed railway network of China in 2017. The results showed that the transfer network and model had relatively high practical value and operation efficiency.

An improved network model for railway traffic

NASA Astrophysics Data System (ADS)

Li, Keping; Ma, Xin; Shao, Fubo

In railway traffic, safety analysis is a key issue for controlling train operation. Here, the identification and order of key factors are very important. In this paper, a new network model is constructed for analyzing the railway safety, in which nodes are regarded as causation factors and links represent possible relationships among those factors. Our aim is to give all these nodes an importance order, and to find the in-depth relationship among these nodes including how failures spread among them. Based on the constructed network model, we propose a control method to ensure the safe state by setting each node a threshold. As the results, by protecting the Hub node of the constructed network, the spreading of railway accident can be controlled well. The efficiency of such a method is further tested with the help of numerical example.

4. July 1971. AERIAL RECONNAISSANCE II, ERIE RAILWAY SURVEY. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. July 1971. AERIAL RECONNAISSANCE II, ERIE RAILWAY SURVEY. - Erie Railway, Parallel French Creek Bridges, 100 feet South of Millers Station Road, 0.4 mile Northeast of State Route 408, 0.9 mile East of Cambridge Springs, Cambridge Springs, Crawford County, PA

2. July 1971. AERIAL RECONNAISSANCE II, ERIE RAILWAY SURVEY. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. July 1971. AERIAL RECONNAISSANCE II, ERIE RAILWAY SURVEY. - Erie Railway, Parallel French Creek Bridges, 100 feet South of Millers Station Road, 0.4 mile Northeast of State Route 408, 0.9 mile East of Cambridge Springs, Cambridge Springs, Crawford County, PA

3. July 1971. AERIAL RECONNAISSANCE II, ERIE RAILWAY SURVEY. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. July 1971. AERIAL RECONNAISSANCE II, ERIE RAILWAY SURVEY. - Erie Railway, Parallel French Creek Bridges, 100 feet South of Millers Station Road, 0.4 mile Northeast of State Route 408, 0.9 mile East of Cambridge Springs, Cambridge Springs, Crawford County, PA

1. July 1971. AERIAL RECONNAISSANCE II, ERIE RAILWAY SURVEY. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. July 1971. AERIAL RECONNAISSANCE II, ERIE RAILWAY SURVEY. - Erie Railway, Parallel French Creek Bridges, 100 feet South of Millers Station Road, 0.4 mile Northeast of State Route 408, 0.9 mile East of Cambridge Springs, Cambridge Springs, Crawford County, PA

Digital Model of Railway Electric Traction Lines

NASA Astrophysics Data System (ADS)

Garg, Rachana; Mahajan, Priya; Kumar, Parmod

2017-08-01

The characteristic impedance and propagation constant define the behavior of signal propagation over the transmission lines. The digital model for railway traction lines which includes railway tracks is developed, using curve fitting technique in MATLAB. The sensitivity of this model has been computed with respect to frequency. The digital sensitivity values are compared with the values of analog sensitivity. The developed model is useful for digital protection, integrated operation, control and planning of the system.

Perspective view of the Oregon Trunk Railway Freight Depot, view ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Perspective view of the Oregon Trunk Railway Freight Depot, view looking west at south end of building - Oregon Trunk Railway Freight Depot, Southwest First Street & Cascade Avenue, Redmond, Deschutes County, OR

78 FR 40266 - Wisconsin Central Ltd.-Amended Trackage Rights Exemption-Grand Trunk Western Railroad Company

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-03

... with Elgin, Joliet & Eastern Railway Company (EJ&E), at or near milepost 36.1 (Griffith), at Griffith... Subdivision between GTW's connection with WCL (formerly EJ&E) at or near milepost 36.1 in Griffith and...., FD 35280 (STB served Aug. 17, 2009). EJ&E subsequently was merged into WCL. Wis. Cent. Ltd.--Intra...

Detail perspective view of the Oregon Trunk Railway Freight Depot, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Detail perspective view of the Oregon Trunk Railway Freight Depot, view looking east at south end of building - Oregon Trunk Railway Freight Depot, Southwest First Street & Cascade Avenue, Redmond, Deschutes County, OR

Partial elevation view of the Oregon Trunk Railway Freight Depot, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Partial elevation view of the Oregon Trunk Railway Freight Depot, view looking west at center of east façade - Oregon Trunk Railway Freight Depot, Southwest First Street & Cascade Avenue, Redmond, Deschutes County, OR

Modeling track access charge to enhance railway industry performance

NASA Astrophysics Data System (ADS)

Berawi, Mohammed Ali; Miraj, Perdana; Berawi, Abdur Rohim Boy; Susantono, Bambang; Leviakangas, Pekka; Radiansyah, Hendra

2017-11-01

Indonesia attempts to improve nation's competitiveness by increasing the quality and the availability of railway network. However, the infrastructure improperly managed by the operator in terms of the technical issue. One of the reasons for this problem is an unbalanced value of infrastructure charge. In 2000's track access charge and infrastructure maintenance and operation for Indonesia railways are equal and despite current formula of the infrastructure charge, issues of transparency and accountability still in question. This research aims to produce an alternative scheme of track access charge by considering marginal cost plus markup (MC+) approach. The research combines qualitative and quantitative method through an in-depth interview and financial analysis. The result will generate alternative formula of infrastructure charge in Indonesia's railway industry. The simulation also conducted to estimate track access charge for the operator and to forecast government support in terms of subsidy. The result is expected to enhance railway industry performance and competitiveness.

Partial elevation view of the Oregon Trunk Railway Freight Depot, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Partial elevation view of the Oregon Trunk Railway Freight Depot, view looking west at south end of east façade - Oregon Trunk Railway Freight Depot, Southwest First Street & Cascade Avenue, Redmond, Deschutes County, OR

Partial elevation view of the Oregon Trunk Railway Freight Depot, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Partial elevation view of the Oregon Trunk Railway Freight Depot, view looking west at north end of east façade - Oregon Trunk Railway Freight Depot, Southwest First Street & Cascade Avenue, Redmond, Deschutes County, OR

4. INTERIOR OF THE HEADHOUSE FOR THE INCLINE RAILWAY SHOWING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. INTERIOR OF THE HEADHOUSE FOR THE INCLINE RAILWAY SHOWING CABLE AND DRUMS FOR LILY HOIST, 1989. - Skagit Power Development, Incline Railway, On Skagit River, 6.1 miles upstream from Newhalem, Newhalem, Whatcom County, WA

[Scale effect of Li-Xiang Railway construction impact on landscape pattern and its ecological risk].

PubMed

Wang, De-zhi; Qiu, Peng-hua; Fang, Yuan-min

2015-08-01

As a large corridor project, plateau railway has multiple points and passes various sensitive environments along the railway. The determination of the scope of impact on ecological environment from railway construction is often controversial in ecological impact assessment work. Taking the Tangbu-Jiantang section of Li-Xiang Railway as study object, and using present land use map (1:10000) in 2012 and DEM as data sources, corridor cutting degree index ( CCI) and cumulative effect index of corridor (CCEI) were established by topology, buffer zone and landscape metrics methods. Besides, the ecological risk index used for railway construction was improved. By quantitative analysis of characteristics of the spatio-temporal change of landscape pattern and its evolution style at different spatial scales before and after railway construction, the most appropriate evaluation scale of the railway was obtained. Then the characteristics of the spatio-temporal variation of ecological risk within this scale before and after railway construction were analyzed. The results indicated that the cutting model and degree of railway corridor to various landscape types could be effectively reflected by CCI, and the exposure and harm relations between risk sources and risk receptors of railway can be measured by CCEI. After the railway construction, the railway corridor would cause a great deal of middle cutting effect on the landscape along the railroad, which would influence wood land and grassland landscape most greatly, while would cause less effect of edge cutting and internal cutting. Landscape indices within the 600 m buffer zone demonstrated the most obvious scale effect, therefore, the 600 m zone of the railway was set as the most suitable range of ecological impact assessment. Before railway construction, the low ecological risk level covered the biggest part of the 600 m assessment zone. However, after the railway construction, the ecological risk increased significantly, and

Overview of the Marine Railway No. 2 from the water's ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Overview of the Marine Railway No. 2 from the water's edge to Facility 233 - U.S. Naval Base, Pearl Harbor, Marine Railway No. 2, Near intersection of Avenue G & Third Street, Pearl City, Honolulu County, HI

Traffic and transport technology-road, railway, and water-borne transportation

DOT National Transportation Integrated Search

1990-01-01

This is "Part 2: Case Studies - Chapter 9" of the book, "The Japanese Experience in Technology", and includes the following subsections: Modernization and the railway; The transportation network; Issues in railway policy; Original design and producti...

The importance of both workplace and private life factors in psychological distress: a large cross-sectional survey of French railway company employees.

PubMed

Evans, David; Mallet, Luc; Flahault, Antoine; Cothereau, Catherine; Velazquez, Sébastien; Capron, Loïc; Lejoyeux, Michel

2013-08-01

The psychological well-being of employees is a priority in occupational health. This study aimed to estimate the prevalence of psychological distress among employees of a large French company, to calculate the associations between distress and stressors in the workplace and private life domains, and to explore confounding across stressor domains. 8,058 employees of the French national railways company completed a nation-wide survey in 2006 (94.3 % participation). Psychological distress was measured by the 12-item General Health Questionnaire and 21 potential stressors and socio-demographic factors by a self-administered questionnaire. Stressors were summarized in scores for work pressure, workplace conflict, and personal life domains. Risk ratios (RRs) between psychological distress and stressors were calculated using robust-variance Poisson regression. The prevalence of psychological distress was 32.8 % (95 % CI 31.8-33.9 %), higher among women (48.9 %, 95 % CI 46.5-51.7 %) than men (30.1 %, 95 % CI 29.0-31.2 %). Each stressor domain was associated with distress in the final model containing likely confounders and all three domains (RR highest vs. lowest level-work pressure: men 1.55, 95 % CI 1.42-1.70, women 1.42, 95 % CI 1.23-1.63; work conflict: men 2.63, 95 % CI 2.38-2.91, women 1.98, 95 % CI 1.70-2.30; life concerns: men 2.04, 95 % CI 1.86-2.23, women 1.53, 95 % CI 1.32-1.78). The mutually adjusted RRs for the stressor domains were smaller than the unadjusted RRs. Almost one-third of all employees and one-half of female employees experienced psychological distress. All three stressor domains were associated with psychological distress and adjustment reduced the association size, suggesting possible over-estimation if one or more domains are omitted from the survey.

40. Exterior view of dockage, marine railway #4, and assembly ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

40. Exterior view of dockage, marine railway #4, and assembly building. Note BBW Tug Sam on railway and BBW-Built Stardust (#1) at end of dock. - Barbour Boat Works, Tryon Palace Drive, New Bern, Craven County, NC

57. Exterior view of marine railway #4. BBW work Tun ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

57. Exterior view of marine railway #4. BBW work Tun Sam on the ways seen from Starboard Bow. Note rail/roller type (steel railway/steel wheels). - Barbour Boat Works, Tryon Palace Drive, New Bern, Craven County, NC

The Marine Railway No. 2 looking toward 1461 Wharf, Facility ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

The Marine Railway No. 2 looking toward 1461 Wharf, Facility 233 is on the right - U.S. Naval Base, Pearl Harbor, Marine Railway No. 2, Near intersection of Avenue G & Third Street, Pearl City, Honolulu County, HI

Railway crossing risk area detection using linear regression and terrain drop compensation techniques.

PubMed

Chen, Wen-Yuan; Wang, Mei; Fu, Zhou-Xing

2014-06-16

Most railway accidents happen at railway crossings. Therefore, how to detect humans or objects present in the risk area of a railway crossing and thus prevent accidents are important tasks. In this paper, three strategies are used to detect the risk area of a railway crossing: (1) we use a terrain drop compensation (TDC) technique to solve the problem of the concavity of railway crossings; (2) we use a linear regression technique to predict the position and length of an object from image processing; (3) we have developed a novel strategy called calculating local maximum Y-coordinate object points (CLMYOP) to obtain the ground points of the object. In addition, image preprocessing is also applied to filter out the noise and successfully improve the object detection. From the experimental results, it is demonstrated that our scheme is an effective and corrective method for the detection of railway crossing risk areas.

The Ginghai-Tibet railway and Tibet tourism: travelers' perspectives

Treesearch

Ming Ming Su; Geoffrey Wall

2009-01-01

The Qinghai-Tibet railway opened in July 2006 and boosted Tibetan tourism markedly by increasing the accessibility and affordability of travel from China to Tibet. This study evaluates the railway's impacts on tourists' travel decisions and experiences in Tibet. The relative importance of the train journey in comparison with the destination experience in...

55. Exterior view of marine railway #4. BBW work Tug ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

55. Exterior view of marine railway #4. BBW work Tug Sam on the ways seen from Port Bow. This was first railway built by BBW on site (Ca.1936). - Barbour Boat Works, Tryon Palace Drive, New Bern, Craven County, NC

Dose reduction and cost-benefit analysis at Japan`s Tokai No. 2 Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Humamoto, Hisao; Suzuki, Seishiro; Taniguchi, Kazufumi

1995-03-01

In the Tokai No. 2 power plant of the Japan Atomic Power Company, about 80% of the annual dose equivalent is received during periodic maintenance outages. A project group for dose reduction was organized at the company`s headquarters in 1986; in 1988, they proposed a five-year program to reduce by half the collective dose of 4 person-Sv per normal outage work. To achieve the target dose value, some dose-reduction measures were undertaken, namely, permanent radiation shielding, decontamination, automatic, operating machines, and ALARA organization. As the result, the collective dose from normal outage work was 1.6 person-Sv in 1992, which wasmore » less than the initial target value.« less

Railway Crossing Risk Area Detection Using Linear Regression and Terrain Drop Compensation Techniques

PubMed Central

Chen, Wen-Yuan; Wang, Mei; Fu, Zhou-Xing

2014-01-01

Most railway accidents happen at railway crossings. Therefore, how to detect humans or objects present in the risk area of a railway crossing and thus prevent accidents are important tasks. In this paper, three strategies are used to detect the risk area of a railway crossing: (1) we use a terrain drop compensation (TDC) technique to solve the problem of the concavity of railway crossings; (2) we use a linear regression technique to predict the position and length of an object from image processing; (3) we have developed a novel strategy called calculating local maximum Y-coordinate object points (CLMYOP) to obtain the ground points of the object. In addition, image preprocessing is also applied to filter out the noise and successfully improve the object detection. From the experimental results, it is demonstrated that our scheme is an effective and corrective method for the detection of railway crossing risk areas. PMID:24936948

Influence of Initial Inclined Surface Crack on Estimated Residual Fatigue Lifetime of Railway Axle

NASA Astrophysics Data System (ADS)

Náhlík, Luboš; Pokorný, Pavel; Ševčík, Martin; Hutař, Pavel

2016-11-01

Railway axles are subjected to cyclic loading which can lead to fatigue failure. For safe operation of railway axles a damage tolerance approach taking into account a possible defect on railway axle surface is often required. The contribution deals with an estimation of residual fatigue lifetime of railway axle with initial inclined surface crack. 3D numerical model of inclined semi-elliptical surface crack in railway axle was developed and its curved propagation through the axle was simulated by finite element method. Presence of press-fitted wheel in the vicinity of initial crack was taken into account. A typical loading spectrum of railway axle was considered and residual fatigue lifetime was estimated by NASGRO approach. Material properties of typical axle steel EA4T were considered in numerical calculations and lifetime estimation.

Effects of market liberalisation on smoking in Japan

PubMed Central

Honjo, K.; Kawachi, I.

2000-01-01

OBJECTIVE—To document the effect of the liberalisation of the Japanese tobacco market on Japanese smoking rates and on Japanese tobacco industry practices.
DATA SOURCE—Asahi Shimbun (major daily newspaper) from 1980 to 1996.
STUDY SELECTION—Review of media coverage on the effects of market liberalisation following the imposition of the USA's section 301 trade sanction.
DATA SYNTHESIS—The opening of Japan's tobacco market to foreign cigarette companies stalled a decline in smoking prevalence. Smoking rates among young women increased significantly, and also appear to be on the rise among adolescents. Aggressive marketing and promotional activities by US and Japanese tobacco companies in response to trade liberalisation appear responsible for these adverse trends. Steep increases in sales through vending machines were also possible contributors to the rising smoking prevalence among adolescents. On the positive side, market liberalisation indirectly promoted smoking control efforts in Japan, by causing an anti-smoking movement to coalesce.
CONCLUSION—Market liberalisation in Japan played a significant role in increasing smoking prevalence among young women and adolescents while helping to transform the issue of smoking in Japan from a matter of individual choice to a public health problem.


Keywords: Japan; market liberalisation PMID:10841856

An overview of natural hazard impacts to railways and urban transportation systems

NASA Astrophysics Data System (ADS)

Bíl, Michal; Nezval, Vojtěch; Bílová, Martina; Andrášik, Richard; Kubeček, Jan

2017-04-01

We present an overview and two case studies of natural hazard impacts on rail transportation systems in the Czech Republic. Flooding, landsliding, heavy snowfall, windstorms and glaze (black ice) are the most common natural processes which occur in this region. Whereas flooding and landsliding usually cause direct damage to the transportation infrastructure, other hazards predominantly cause indirect losses. Railway and urban tramline networks are almost fully dependent on electricity which is provided by a system of overhead lines (electric lines above the tracks). These lines are extremely susceptible to formation of glaze which blocks conduction of electric current. A December 2014 glaze event caused significant indirect losses in the largest Czech cities and railways due to the above-mentioned process. Details of this event will be provided during the presentation. Windstorms usually cause tree falls which can affect overhead lines and physically block railway tracks. Approximately 30 % of the Czech railway network is closer than 50 m from the nearest forest. This presents significant potential for transport interruption due to falling trees. Complicated legal relations among the owners of the plots of land along railways, the environment (full-grown trees and related habitat), and the railway administrator are behind many traffic interruptions due to falling trees. We have registered 2040 tree falls between 2012 and 2015 on the railway network. A model of the fallen tree hazard was created for the entire Czech railway network. Both above-mentioned case studies provide illustrative examples of the increased fragility of the modern transportation systems which fully rely on electricity. Natural processes with a low destructive power are thereby able to cause network wide service cut-offs.

Subsidence Evaluation of High-Speed Railway in Shenyang Based on Time-Series Insar

NASA Astrophysics Data System (ADS)

Zhang, Yun; Wei, Lianhuan; Li, Jiayu; Liu, Shanjun; Mao, Yachun; Wu, Lixin

2018-04-01

More and more high-speed railway are under construction in China. The slow settlement along high-speed railway tracks and newly-built stations would lead to inhomogeneous deformation of local area, and the accumulation may be a threat to the safe operation of high-speed rail system. In this paper, surface deformation of the newly-built high-speed railway station as well as the railway lines in Shenyang region will be retrieved by time series InSAR analysis using multi-orbit COSMO-SkyMed images. This paper focuses on the non-uniform subsidence caused by the changing of local environment along the railway. The accuracy of the settlement results can be verified by cross validation of the results obtained from two different orbits during the same period.

Railway bogie vibration analysis by mathematical simulation model and a scaled four-wheel railway bogie set

NASA Astrophysics Data System (ADS)

Visayataksin, Noppharat; Sooklamai, Manon

2018-01-01

The bogie is the part that connects and transfers all the load from the vehicle body onto the railway track; interestingly the interaction between wheels and rails is the critical point for derailment of the rail vehicles. However, observing or experimenting with real bogies on rail vehicles is impossible due to the operational rules and safety concerns. Therefore, this research aimed to develop a vibration analysis set for a four-wheel railway bogie by constructing a four-wheel bogie with scale of 1:4.5. The bogie structures, including wheels and axles, were made from an aluminium alloy, equipped with springs and dampers. The bogie was driven by an electric motor using 4 round wheels instead of 2 straight rails, with linear velocity between 0 to 11.22 m/s. The data collected from the vibration analysis set was compared to the mathematical simulation model to investigate the vibration behavior of the bogie, especially the hunting motion. The results showed that vibration behavior from a scaled four-wheel railway bogie set significantly agreed with the mathematical simulation model in terms of displacement and hunting frequency. The critical speed of the wheelset was found by executing the mathematical simulation model at 13 m/s.

21. Historic drawing, Marine Railway. Equalizing Gear Layout, 1917. Photographic ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

21. Historic drawing, Marine Railway. Equalizing Gear Layout, 1917. Photographic copy of original. Boston National Historical Park Archives, Charlestown Navy Yard. BOSTS 13439, #551-4 - Charlestown Navy Yard, Marine Railway, Between Piers 2 & 3, on Charlestown Waterfront at west end of Navy Yard, Boston, Suffolk County, MA

20. Historic drawing, Marine Railway. Design of Cradle, 1917. Photographic ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

20. Historic drawing, Marine Railway. Design of Cradle, 1917. Photographic copy of original. Boston National Historical Park Archives, Charlestown Navy Yard. BOSTS 13439, #551-2 - Charlestown Navy Yard, Marine Railway, Between Piers 2 & 3, on Charlestown Waterfront at west end of Navy Yard, Boston, Suffolk County, MA

22. Historic drawing, Marine Railway. Track Plan, 1917. Photographic copy ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

22. Historic drawing, Marine Railway. Track Plan, 1917. Photographic copy of original. Boston National Historical Park Archives, Charlestown Navy Yard. BOSTS 13439, #551-5 - Charlestown Navy Yard, Marine Railway, Between Piers 2 & 3, on Charlestown Waterfront at west end of Navy Yard, Boston, Suffolk County, MA

78 FR 40267 - Illinois Central Railroad Company-Amended Trackage Rights Exemption-Grand Trunk Western Railroad...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-03

... connection with the Elgin, Joliet & Eastern Railway Company (EJ&E) at or near milepost 36.1, at Griffith, Ind... (formerly EJ&E) at or near milepost 36.1 in Griffith and milepost 43.3 in Spring Lake, Ind. \\1\\ See Ill. Cent. R.R.--Trackage Rights Exemption--Grand Trunk W. R.R., FD 35268 (STB served Aug. 17, 2009). EJ&E...

Railway noise annoyance and the importance of number of trains, ground vibration, and building situational factors.

PubMed

Gidlöf-Gunnarsson, Anita; Ögren, Mikael; Jerson, Tomas; Öhrström, Evy

2012-01-01

Internationally accepted exposure-response relationships show that railway noise causes less annoyance than road traffic and aircraft noise. Railway transport, both passenger and freight transport, is increasing, and new railway lines are planned for environmental reasons. The combination of more frequent railway traffic and faster and heavier trains will, most probably, lead to more disturbances from railway traffic in the near future. To effectively plan for mitigations against noise and vibration from railway traffic, new studies are needed to obtain a better basis of knowledge. The main objectives of the present study was to investigate how the relationship between noise levels from railway traffic and general annoyance is influenced by (i) number of trains, (ii) the presence of ground borne vibrations, and (iii) building situational factors, such as orientation of balcony/patio and bedroom window. Socio-acoustic field studies were executed in residential areas; (1) with relatively intense railway traffic; (2) with strong vibrations, and; (3) with the most intense railway traffic in the country. Data was obtained for 1695 respondents exposed to sound levels ranging from L(Aeq,24h) 45 to 65 dB. Both number of trains and presence of ground-borne vibrations, and not just the noise level per se, are of relevance for how annoying railway noise is perceived. The results imply that, for the proportion annoyed to be equal, a 5 - 7 dB lower noise level is needed in areas where the railway traffic causes strong ground-borne vibrations and in areas with a very large number of trains. General noise annoyance was twice as high among residents in dwellings with balcony / patio oriented towards the railway and about 1.5 times higher among residents with bedroom windows facing the railway.

27. Historic drawing, Marine Railway. Detail of Emergency Brake, 1917. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

27. Historic drawing, Marine Railway. Detail of Emergency Brake, 1917. Photographic copy of original. Boston National Historical Park Archives, Charlestown Navy Yard. BOSTS 13439, #551-16 - Charlestown Navy Yard, Marine Railway, Between Piers 2 & 3, on Charlestown Waterfront at west end of Navy Yard, Boston, Suffolk County, MA

19. Historic drawing, Marine Railway. Cradle and Track Plan, 1917. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

19. Historic drawing, Marine Railway. Cradle and Track Plan, 1917. Photographic copy of original. Boston National Historical Park Archives, Charlestown Navy Yard. BOSTS 13439, #551-1 - Charlestown Navy Yard, Marine Railway, Between Piers 2 & 3, on Charlestown Waterfront at west end of Navy Yard, Boston, Suffolk County, MA

24. Historic drawing, Marine Railway. Wrought Iron Details, 1917. Photographic ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

24. Historic drawing, Marine Railway. Wrought Iron Details, 1917. Photographic copy of original. Boston National Historical Park Archives, Charlestown Navy Yard. BOSTS 13439, #551-8A - Charlestown Navy Yard, Marine Railway, Between Piers 2 & 3, on Charlestown Waterfront at west end of Navy Yard, Boston, Suffolk County, MA

23. Historic drawing, Marine Railway. Details of Hauling Machinery, 1917. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

23. Historic drawing, Marine Railway. Details of Hauling Machinery, 1917. Photographic copy of original. Boston National Historical Park Archives, Charlestown Navy Yard. BOSTS 13439, #551-7 - Charlestown Navy Yard, Marine Railway, Between Piers 2 & 3, on Charlestown Waterfront at west end of Navy Yard, Boston, Suffolk County, MA

25. Historic drawing, Marine Railway. Proposed Road Over Chains, 1917. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

25. Historic drawing, Marine Railway. Proposed Road Over Chains, 1917. Photographic copy of original. Boston National Historical Park Archives, Charlestown Navy Yard. BOSTS 13439, #551-9 - Charlestown Navy Yard, Marine Railway, Between Piers 2 & 3, on Charlestown Waterfront at west end of Navy Yard, Boston, Suffolk County, MA

Price Analysis of Railway Freight Transport under Marketing Mechanism

NASA Astrophysics Data System (ADS)

Shi, Ying; Fang, Xiaoping; Chen, Zhiya

Regarding the problems in the reform of the railway tariff system and the pricing of the transport, by means of assaying the influence of the price elasticity on the artifice used for price, this article proposed multiple regressive model which analyzed price elasticity quantitatively. This model conclude multi-factors which influences on the price elasticity, such as the averagely railway freight charge, the averagely freight haulage of proximate supersede transportation mode, the GDP per capita in the point of origin, and a series of dummy variable which can reflect the features of some productive and consume demesne. It can calculate the price elasticity of different classes in different domains, and predict the freight traffic volume on different rate levels. It can calculate confidence-level, and evaluate the relevance of each parameter to get rid of irrelevant or little relevant variables. It supplied a good theoretical basis for directing the pricing of transport enterprises in market economic conditions, which is suitable for railway freight, passenger traffic and other transportation manner as well. SPSS (Statistical Package for the Social Science) software was used to calculate and analysis the example. This article realized the calculation by HYFX system(Ministry of Railways fund).

26. Historic drawing, Marine Railway. Layout of Hauling Machinery, Building ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

26. Historic drawing, Marine Railway. Layout of Hauling Machinery, Building 24, 1917. Photographic copy of original. Boston National Historical Park Archives, Charlestown Navy Yark. BOSTS 13439, #551-15 - Charlestown Navy Yard, Marine Railway, Between Piers 2 & 3, on Charlestown Waterfront at west end of Navy Yard, Boston, Suffolk County, MA

28. Historic drawing, Marine Railway. Section showing bilge and keel ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

28. Historic drawing, Marine Railway. Section showing bilge and keel blocks, 1919. Photographic copy of original. Boston National Historical Park Archives, Charlestown Navy Yard. BOSTS 13439, #551-20 - Charlestown Navy Yard, Marine Railway, Between Piers 2 & 3, on Charlestown Waterfront at west end of Navy Yard, Boston, Suffolk County, MA

An innovative localisation algorithm for railway vehicles

NASA Astrophysics Data System (ADS)

Allotta, B.; D'Adamio, P.; Malvezzi, M.; Pugi, L.; Ridolfi, A.; Rindi, A.; Vettori, G.

2014-11-01

In modern railway automatic train protection and automatic train control systems, odometry is a safety relevant on-board subsystem which estimates the instantaneous speed and the travelled distance of the train; a high reliability of the odometry estimate is fundamental, since an error on the train position may lead to a potentially dangerous overestimation of the distance available for braking. To improve the odometry estimate accuracy, data fusion of different inputs coming from a redundant sensor layout may be used. The aim of this work has been developing an innovative localisation algorithm for railway vehicles able to enhance the performances, in terms of speed and position estimation accuracy, of the classical odometry algorithms, such as the Italian Sistema Controllo Marcia Treno (SCMT). The proposed strategy consists of a sensor fusion between the information coming from a tachometer and an Inertial Measurements Unit (IMU). The sensor outputs have been simulated through a 3D multibody model of a railway vehicle. The work has provided the development of a custom IMU, designed by ECM S.p.a, in order to meet their industrial and business requirements. The industrial requirements have to be compliant with the European Train Control System (ETCS) standards: the European Rail Traffic Management System (ERTMS), a project developed by the European Union to improve the interoperability among different countries, in particular as regards the train control and command systems, fixes some standard values for the odometric (ODO) performance, in terms of speed and travelled distance estimation. The reliability of the ODO estimation has to be taken into account basing on the allowed speed profiles. The results of the currently used ODO algorithms can be improved, especially in case of degraded adhesion conditions; it has been verified in the simulation environment that the results of the proposed localisation algorithm are always compliant with the ERTMS requirements

16. Historic view, Marine Railway construction. View to southeast, May ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

16. Historic view, Marine Railway construction. View to southeast, May 29, 1919. Photographic copy of photo. Boston National Historical Park Archives, Charlestown Navy Yard. BOSTS 8962, USN #5049, 5/29/19 - Charlestown Navy Yard, Marine Railway, Between Piers 2 & 3, on Charlestown Waterfront at west end of Navy Yard, Boston, Suffolk County, MA

15. Historic view, Marine Railway construction. View to southeast, May ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

15. Historic view, Marine Railway construction. View to southeast, May 28, 1919. Photographic copy of photo. Boston National Historical Park Archives, Charlestown Navy Yard. BOSTS 8962, USN #5046, 5/29/19 - Charlestown Navy Yard, Marine Railway, Between Piers 2 & 3, on Charlestown Waterfront at west end of Navy Yard, Boston, Suffolk County, MA

11. Historic view, Marine Railway construction. View to southeast, July ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. Historic view, Marine Railway construction. View to southeast, July 5, 1918. Photographic copy of photo. Boston National Historical Park Archives, Charlestown Navy Yard. BOSTS 8962, USN #3988, 7/5/18 - Charlestown Navy Yard, Marine Railway, Between Piers 2 & 3, on Charlestown Waterfront at west end of Navy Yard, Boston, Suffolk County, MA

12. Historic view, Marine Railway construction. View to southeast, September ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

12. Historic view, Marine Railway construction. View to southeast, September 8, 1918. Photographic copy of photo. Boston National Historical Park Archives, Charlestown Navy Yard. BOSTS 8962, USN #4229, 9/6/18 - Charlestown Navy Yard, Marine Railway, Between Piers 2 & 3, on Charlestown Waterfront at west end of Navy Yard, Boston, Suffolk County, MA

13. Historic view, Marine Railway construction. View to southeast, March ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. Historic view, Marine Railway construction. View to southeast, March 9, 1919. Photographic copy of photo. Boston National Historical Park Archives, Charlestown Navy Yard. BOSTS 8962, USN #4801, 3/9/19 - Charlestown Navy Yard, Marine Railway, Between Piers 2 & 3, on Charlestown Waterfront at west end of Navy Yard, Boston, Suffolk County, MA

14. Historic view, Marine Railway construction. View to southeast, May ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

14. Historic view, Marine Railway construction. View to southeast, May 5, 1919. Photographic copy of photo. Boston National Historical Park Archives, Charlestown Navy Yard. BOSTS 8962, USN #4930, 5/5/19 - Charlestown Navy Yard, Marine Railway, Between Piers 2 & 3, on Charlestown Waterfront at west end of Navy Yard, Boston, Suffolk County, MA

A cascading failure model for analyzing railway accident causation

NASA Astrophysics Data System (ADS)

Liu, Jin-Tao; Li, Ke-Ping

2018-01-01

In this paper, a new cascading failure model is proposed for quantitatively analyzing the railway accident causation. In the model, the loads of nodes are redistributed according to the strength of the causal relationships between the nodes. By analyzing the actual situation of the existing prevention measures, a critical threshold of the load parameter in the model is obtained. To verify the effectiveness of the proposed cascading model, simulation experiments of a train collision accident are performed. The results show that the cascading failure model can describe the cascading process of the railway accident more accurately than the previous models, and can quantitatively analyze the sensitivities and the influence of the causes. In conclusion, this model can assist us to reveal the latent rules of accident causation to reduce the occurrence of railway accidents.

Semi-empirical model for the assessment of railway ballast using GPR

NASA Astrophysics Data System (ADS)

Giulia Brancadoro, Maria; Benedetto, Andrea

2017-04-01

Over time, railways have become a very competitive mean of transportation, especially for long distances. In order to ensure high level of safety, comfort and regularity of transportation, an efficient maintenance of the railway track-bed is crucial. In fact, the cyclic loads passing on the rails produce a progressive deterioration of railway ballast beneath the sleepers, and a breakdown of its particles that causes a general decrease of railway performances. This work aims at proposing a semi-empirical model for the characterisation of railway ballast grading, through the spectral analysis of Ground-Penetrating Radar (GPR) signal. To this effect, a theoretical study has been preliminary conducted to investigate the propagation and scattering phenomena of the electromagnetic waves within a ballast layer. To confirm the theoretical assumptions, high-frequency GPR signals have been both collected in laboratory and virtual environment. Concerning the latter, progressively more complex numerical domains have been designed and subjected to synthetic GPR test, by a Finite Different Time Domain (FTDT) procedure, run in GPR Max 2D simulator. As first simulation steps, ballast aggregates simplified through circles have been accounted for, with increasing values of radius. Subsequently, real-scale scenarios characterized by multi-size ballast particles, consistent with three different grain size distribution from railway network standards, have been reproduced by the employment of Random Sequential Adsorption - RSA algorithm. As far as the laboratory procedures, real GPR tests have been carried out on an experimental framework purposely set up, and composed of a methacrylate tank filled up with limestone-derived railway ballast. The ballast aggregates grading has been retrieved by means of an automatic image analysis algorithm, run on the lateral sight of the transparent tank. Through their spectral analysis, an empirical relationship between the position of the amplitude

Pollution level and reusability of the waste soil generated from demolition of a rural railway.

PubMed

Han, Il; Wee, Gui Nam; No, Jee Hyun; Lee, Tae Kwon

2018-09-01

Railways are typically considered polluted from years of train operation. However, the pollution level of railway in a rural area, which is less exposed to hazardous material from trains and freights, is rarely assessed. This study evaluated common railway pollutants such as heavy metals, total petroleum hydrocarbons (TPHs) and polycyclic aromatic hydrocarbons (PAHs) and their chemical properties in the waste soil generated from the renovation of an old railway in rural area of Wonju, South Korea. Furthermore, lab-scale cultivation tests of peas (Pisum sativum) were performed to assess reusability of the waste soil as a soil amendment. Carbonaceous materials were found in the upper layer of the railway (0 to -40 cm) and the concentration of common railway pollutants was comparable to those of the agricultural land nearby. Specifically, total aromatic and aliphatic TPHs were below detection limit; and total PAHs < 1.0 mg kg -1 was 1000-times less than railway functional parts. Applying the carbonaceous waste soil improved the water holding capacity of soil by approximately 10% and sprouts formed on the soil with 10% waste soil composition had greater fresh weight, stem length, and root length than the control. Although this investigation was confined to a small length of the railway route, the results confirm environmental safety and the potential value of the waste generated from rural railways for the first time. Copyright © 2018 Elsevier Ltd. All rights reserved.

A naturalistic study of railway controllers.

PubMed

Farrington-Darby, T; Wilson, John R; Norris, B J; Clarke, Theresa

There is an increasing prevalence for work to be analysed through naturalistic study, especially using ethnographically derived methods of enquiry and qualitative field research. The relatively unexplored domain of railway control (in comparison to signalling) in the UK is described in terms of features derived from observations and semi-structured interviews. In addition, task diagrams (a technique taken from the Applied Cognitive Task Analysis toolkit) are used to represent controllers' core elements of work, i.e. to manage events or incidents, and to identify the challenging steps in the process. The work features identified, the task diagrams, and the steps identified as challenging form a basis from which future ergonomics studies on railway controllers in the UK will be carried out.

65. CALIFORNIA STREET CABLE RAILWAY WINDING MACHINERY: Photocopy of ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

65. CALIFORNIA STREET CABLE RAILWAY - WINDING MACHINERY: Photocopy of February 1955 photograph showing the winding machinery of the California Street Cable Railroad. The two suspended sheaves on the right of the photograph bore down on the cable as it left the winders, supplying tension to the cable and eliminating the need for a long tension run. - San Francisco Cable Railway, Washington & Mason Streets, San Francisco, San Francisco County, CA

Risk Evaluation of Railway Coal Transportation Network Based on Multi Level Grey Evaluation Model

NASA Astrophysics Data System (ADS)

Niu, Wei; Wang, Xifu

2018-01-01

The railway transport mode is currently the most important way of coal transportation, and now China’s railway coal transportation network has become increasingly perfect, but there is still insufficient capacity, some lines close to saturation and other issues. In this paper, the theory and method of risk assessment, analytic hierarchy process and multi-level gray evaluation model are applied to the risk evaluation of coal railway transportation network in China. Based on the example analysis of Shanxi railway coal transportation network, to improve the internal structure and the competitiveness of the market.

Effect of situational, attitudinal and demographic factors on railway vibration annoyance in residential areas.

PubMed

Peris, Eulalia; Woodcock, James; Sica, Gennaro; Sharp, Calum; Moorhouse, Andrew T; Waddington, David C

2014-01-01

Railway induced vibration is an important source of annoyance among residents living in the vicinity of railways. Annoyance increases with vibration magnitude. However, these correlations between the degree of annoyance and vibration exposure are weak. This suggests that railway vibration induced annoyance is governed by more than just vibration level and therefore other factors may provide information to understand the wide variation in annoyance reactions. Factors coming into play when considering an exposure-response relationship between level of railway vibration and annoyance are presented. The factors investigated were: attitudinal, situational and demographic factors. This was achieved using data from field studies comprised of face-to-face interviews and internal vibration measurements (N = 755). It was found that annoyance scores were strongly influenced by two attitudinal factors: Concern of property damage and expectations about future levels of vibration. Type of residential area and age of the respondent were found to have an important effect on annoyance whereas visibility of the railway and time spent at home showed a significant but small influence. These results indicate that future railway vibration policies and regulations focusing on community impact need to consider additional factors for an optimal assessment of railway effects on residential environments.

18. Historic view, Test of Marine Railway, USS Grebe and ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

18. Historic view, Test of Marine Railway, USS Grebe and USS Acushnet. View to soutwest, June 10, 1919. Photographic copy of photo. Boston National Historical Park Archives, Charlestown Navy Yard. BOSTS 8962, USN #5080, 6/10/19 - Charlestown Navy Yard, Marine Railway, Between Piers 2 & 3, on Charlestown Waterfront at west end of Navy Yard, Boston, Suffolk County, MA

17. Historic view, Test of Marine Railway, USCC Ossippee. View ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

17. Historic view, Test of Marine Railway, USCC Ossippee. View to southeast, June 2, 1919. Photographic copy of photo. Boston National Historical Park Archives, Charlestown Navy Yard. BOSTS 8962, USN #5054, 6/7/19 - Charlestown Navy Yard, Marine Railway, Between Piers 2 & 3, on Charlestown Waterfront at west end of Navy Yard, Boston, Suffolk County, MA

[Expertise level of occupational health physician, implementation of occupational safety and health management system (OSHMS) and occupational safety and health activity level in Japan in the companies listed on Tokyo Stock Exchange first section].

PubMed

Ikeda, Yukiko; Kameda, Takashi; Shirakawa, Chie; Nagata, Tomohisa; Zama, Satoko; Kayashima, Koutarou; Kobayashi, Yuuichi; Mori, Koji

2007-12-01

By enforcement of the revised Japanese Industrial Safety and Health Law on April, 2006, the implementation of OSHMS seems to be expanding and encouraged. In OSHMS of Japan, however, the occupational health aspects have not been put into operated, while only occupational safety aspects have been prioritized. To clarify the issues to deploy OSHMS with occupational health aspects, we conducted a mail survey of 1,581 companies listed on the Tokyo Stock Market First Section in December, 2004. The effective responses were 267 (16.9%). The number of companies which had installed OSHMS, those that planned to install OSHMS and those had no plan for OSHMS were 62 (23.2%), 82 (30.7%) and 123 (46.1%), respectively. Only 12 companies include the complete OH activities in the installed OSHMS. A significant relationship was observed among expertise of OH physicians, actual role and responsibility of OH physicians, installation of OSHMS and OH services quality level. To deploy OSHMS well-balanced for health and safety aspects in present Japan, it was suggested that the education regarding OH operation in OSHMS was necessary to the person in charge of OSHMS in each company, and the participation by OH physicians to operate OSHMS, especially OH physicians with expertise, was essential.

Interaction of railway vehicles with track in cross-winds

NASA Astrophysics Data System (ADS)

Xu, Y. L.; Ding, Q. S.

2006-04-01

This paper presents a framework for simulating railway vehicle and track interaction in cross-wind. Each 4-axle vehicle in a train is modeled by a 27-degree-of-freedom dynamic system. Two parallel rails of a track are modeled as two continuous beams supported by a discrete-elastic foundation of three layers with sleepers and ballasts included. The vehicle subsystem and the track subsystem are coupled through contacts between wheels and rails based on contact theory. Vertical and lateral rail irregularities simulated using an inverse Fourier transform are also taken into consideration. The simulation of steady and unsteady aerodynamic forces on a moving railway vehicle in cross-wind is then discussed in the time domain. The Hilber Hughes Taylor α-method is employed to solve the nonlinear equations of motion of coupled vehicle and track systems in cross-wind. The proposed framework is finally applied to a railway vehicle running on a straight track substructure in cross-wind. The safety and comfort performance of the moving vehicle in cross-wind are discussed. The results demonstrate that the proposed framework and the associated computer program can be used to investigate interaction problems of railway vehicles with track in cross-wind.

Physiological effects of railway vibration and noise on sleep

PubMed Central

Smith, Michael G.; Croy, Ilona; Ögren, Mikael; Hammar, Oscar; Lindberg, Eva; Persson Waye, Kerstin

2017-01-01

This paper evaluates the relative contribution of vibration and noise from railway on physiological sleep outcomes. Vibration from railway freight often accompanies airborne noise, yet is almost totally absent in the existing literature. In an experimental investigation, 23 participants, each sleeping for six nights in the laboratory, were exposed to 36 simulated railway freight pass-bys per night with vibration alone (aWd,max = 0.0204 ms−2), noise alone (LAF,max = 49.8 dB), or both vibration and noise simultaneously. A fourth exposure night involved 52 pass-bys with concurrent vibration and noise. Sleep was measured with polysomnography. Cardiac activity was measured with electrocardiography. The probability of cortical arousals or awakenings was greater following all exposures, including vibration alone, than spontaneous reaction probability (p < 0.05). The effects of vibration exposure and noise exposure on changes of sleep stage and arousals were directly additive. Vibration and noise exposure both induced heart rate acceleration above spontaneously expected fluctuations at baseline. The results indicate that vibration and noise are processed in the brain separately yet in parallel, with both contributing towards the likelihood of sleep disruption. The findings show that vibration is of importance when considering the impact of railway freight on sleep. PMID:28599531

[Comparison of railway employees and college students as evaluator of vibration discomfort].

PubMed

Suzuki, Hiroaki

2002-06-01

Typically, vibration discomfort of railway cars was studied with railway employees as evaluator, because of their availability and interest, as well as various study requirements. However, it has not been shown that employees are appropriate for the task. In this study, railway employees were compared with college students in order to find how their ratings compared with those by ordinary passengers. An experiment was conducted in a running train, and 41 persons participated; about a half were railway employees and the other college students who were invited as non-specialists. Their task was to rate vibration discomfort on a scale of 1 to 4, continuously at an interval of 5 seconds. Results indicated that employee ratings showed smaller individual differences and in general were more cautious than the student ratings.

Color Vision and the Railways: Part 3. Comparison of FaLant, OPTEC 900, and Railway LED Lantern Tests.

PubMed

Dain, Stephen J; Casolin, Armand; Long, Jennifer

2015-02-01

The Farnsworth Lantern (FaLant) and the OPTEC 900 are nominated in the Commission Internationale de l'Éclairage (CIE) Color Vision Standard 2. Neither test uses the railway signal color code of red, yellow, and green, and only the OPTEC 900 is commercially available. The Railway LED Lantern Test (RLLT) is based on railway signaling practices in New South Wales, Australia, and is nominated in the Australian railway medical standard. The objective of this study is to compare the performance of the three lantern tests. The RLLT, FaLant, and OPTEC 900 were administered to 46 color vision-normal and 37 color vision-deficient (CVD) subjects. The pattern of errors on the RLLT was different from that of the FaLant and OPTEC 900. This may be accounted for, at least in part, by the different colors and the use of blank presentations in the RLLT. The three lanterns showed agreement in failing 21 and passing 6 of the CVD subjects (72.9%). The lanterns gave different results for 10 CVD subjects (27.9%): n = 5 passed only the RLLT and n = 3 passed only the FaLant; n = 1 failed only the FaLant and n = 1 failed only the RLLT. The overall failure rate by CVD for each lantern was 67.6% (RLLT), 73.0% (FaLant), and 78.4% (OPTEC 900). Despite the different construction principles, the pass/fail levels of the RLLT, FaLant, and OPTEC 900 are comparable and consistent with the performance of other lanterns listed by the CIE for Color Vision Standard 2. The RLLT may be a little easier to pass and is based on the signal color code used and actual signaling practice. We propose that the RLLT is also an appropriate lantern for CIE Color Vision Standard 2.

Fuzzy Temporal Logic Based Railway Passenger Flow Forecast Model

PubMed Central

Dou, Fei; Jia, Limin; Wang, Li; Xu, Jie; Huang, Yakun

2014-01-01

Passenger flow forecast is of essential importance to the organization of railway transportation and is one of the most important basics for the decision-making on transportation pattern and train operation planning. Passenger flow of high-speed railway features the quasi-periodic variations in a short time and complex nonlinear fluctuation because of existence of many influencing factors. In this study, a fuzzy temporal logic based passenger flow forecast model (FTLPFFM) is presented based on fuzzy logic relationship recognition techniques that predicts the short-term passenger flow for high-speed railway, and the forecast accuracy is also significantly improved. An applied case that uses the real-world data illustrates the precision and accuracy of FTLPFFM. For this applied case, the proposed model performs better than the k-nearest neighbor (KNN) and autoregressive integrated moving average (ARIMA) models. PMID:25431586

29 CFR 1915.75 - Access to and guarding of dry docks and marine railways.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Access to and guarding of dry docks and marine railways... railways. The provisions of this section shall apply to ship repairing, shipbuilding and shipbreaking. (a... applicable requirements of § 1915.72. (g) Catwalks on stiles of marine railways shall be no less than 20...

Railway obstacle detection algorithm using neural network

NASA Astrophysics Data System (ADS)

Yu, Mingyang; Yang, Peng; Wei, Sen

2018-05-01

Aiming at the difficulty of detection of obstacle in outdoor railway scene, a data-oriented method based on neural network to obtain image objects is proposed. First, we mark objects of images(such as people, trains, animals) acquired on the Internet. and then use the residual learning units to build Fast R-CNN framework. Then, the neural network is trained to get the target image characteristics by using stochastic gradient descent algorithm. Finally, a well-trained model is used to identify an outdoor railway image. if it includes trains and other objects, it will issue an alert. Experiments show that the correct rate of warning reached 94.85%.

Influence of vertical holes on creep and shrinkage of railway prestressed concrete sleepers

NASA Astrophysics Data System (ADS)

Li, Dan; Ngamkhanong, Chayut; Kaewunruen, Sakdirat

2017-09-01

Railway prestressed concrete sleepers (or railroad ties) must successfully perform two critical duties: first, to carry wheel loads from the rails to the ground; and second, to secure rail gauge for dynamic safe movements of trains. The second duty is often fouled by inappropriate design of the time-dependent behaviors due to their creep, shrinkage and elastic shortening responses of the materials. In addition, the concrete sleepers are often modified on construction sites to fit in other systems such as cables, signalling gears, drainage pipes, etc. Accordingly, this study is the world first to investigate creep and shrinkage effects on the railway prestressed concrete sleepers with vertical holes. This paper will highlight constitutive models of concrete materials within the railway sleepers under different environmental conditions over time. It will present a comparative investigation using a variety of methods to evaluate shortening effects in railway prestressed concrete sleepers. The outcome of this study will improve material design, which is very critical to the durability of railway track components.

[Railway medical hygiene and health protection system in Croatia between 1945 and 1953].

PubMed

Lajnert, Sinisa

2014-01-01

This paper describes the system of medical hygiene and health care adopted by the Croatian section of Yugoslav Railways in the aftermath of World War Two until 1953, based on archival information. In 1945, the human resources section of the Railway Administration in Zagreb included the Department of Social Welfare with offices that managed health insurance in cases of illness and accidents, workers' pension fund, and sanitary care‥ On 19 June 1947, the regional railway executive board established a medical section within the so called Secretariat and appointed Dr Marijan Derkos as its head. On 3 July 1948, central and regional healthcare offices for traffic staff were established to manage and oversee the activities of health institutions providing services for railway workers. The seat of the regional office in Zagreb was in Grgurova street. After the dismantlement of the central healthcare office in charge of railway health institutions in 1953, regional boards established new institutions, that were now self-financed.

Momentary discomfort caused by vibration of railway vehicle.

PubMed

Suzuki, H

1998-04-01

When trains pass level crossings or turnouts, they are momentarily subject to relatively strong vibrations. In railway engineering, evaluation of the riding comfort under such occasional vibrations is called the momentary evaluation, which is distinguished from the long-term evaluation. In order to identify the effective vibrational characteristics on the momentary evaluation now controversial in Japan, an experiment was performed with a riding comfort simulator. Twenty adult subjects were exposed to lateral vibration with varying peak acceleration and crest factor. Referring to the vibrations of real trains, the peak acceleration in the range of 0.35-2.00 m/s2 were varied in steps of 0.35 m/s2 and the crest factors in the range of 1.5-5.0 were varied in steps of 0.5. The frequency was set constant at 2 Hz. The task was to rate the degree of discomfort under each vibration which was given them successively. Results indicate that changes in the peak acceleration are most effective, and application of the crest factor in parallel improves the correlation with the perceived discomfort. Whether subjects can perceive changes in the peak or not affects the evaluation. Weights of vibrational characteristics that make a cue to the evaluation by subjects differ from person to person.

Annoyance evaluation due to overall railway noise and vibration in Pisa urban areas.

PubMed

Licitra, Gaetano; Fredianelli, Luca; Petri, Davide; Vigotti, Maria Angela

2016-10-15

The noise impact of the whole railway infrastructure was characterized in the urban environment of Pisa, Italy. The ordinary train transits were considered, nevertheless it was given particular attention also to the noise sources referable to railway operations like manoeuvring, loading and unloading, truck movements, braking, squeals and whistles. These kinds of noise are usually neglected in the noise modelling and are hereafter called "unconventional noises". The characteristics of the railway infrastructure and the receptors' distribution guided the measuring point selection and led to a survey with a sample of 119 people ranging between the ages of 35 and 70 and residents in the area for at least 5 years. The differences between the ordinary noise modelling and the measured noise, including the unconventional ones, were investigated. Dose-effect relationships for %HA and measured or simulated railways noise were calculated and compared with others in literature. The last paragraph of this paper is dedicated to the exposure to railway vibration and its relation with noise exposure. The results show the limitations of traditional noise mapping for railway epidemiological studies based exclusively on ordinary transits and confirm the role of vibrations as enhancing factor for disturbance. Copyright © 2015 Elsevier B.V. All rights reserved.

The effects of the Qinghai-Tibet railway on heavy metals enrichment in soils.

PubMed

Zhang, Hua; Wang, Zhaofeng; Zhang, Yili; Hu, Zhongjun

2012-11-15

The impact of land transportation on local soil environments is an important topic in environmental and ecological sciences. The rapid development of transportation infrastructure lends increasing importance to studies that identify and evaluate related heavy metal pollution. This paper discusses the effects of railways on soil heavy metal enrichments in the Tibetan plateau. At a representative area along the Haergai-Delingha railway, lead, cadmium, copper, zinc, chromium, nickel, cobalt, and vanadium were measured in 127 topsoil samples (0-10 cm depth). The results indicate that railway transport has a significant effect on the concentration of Zn, Cd and Pb in the soil, with levels of enrichment ranging from no pollution to significant pollution. The affected area was within 20 m of the railway. The soil at Delingha was the most contaminated soil with heavy metals, and the enrichment level of Cd in the soil was the highest along the Qinghai-Tibet railway. The horizontal distributions of the three heavy metals present different characteristics at different sampling sites, which may be due to discrepancies in terrain and vegetation types. Alkaline soils and guardrails along the railway might reduce the effect of soil pollution on local people and animals. Crown Copyright © 2012. Published by Elsevier B.V. All rights reserved.

A rough set-based measurement model study on high-speed railway safety operation.

PubMed

Hu, Qizhou; Tan, Minjia; Lu, Huapu; Zhu, Yun

2018-01-01

Aiming to solve the safety problems of high-speed railway operation and management, one new method is urgently needed to construct on the basis of the rough set theory and the uncertainty measurement theory. The method should carefully consider every factor of high-speed railway operation that realizes the measurement indexes of its safety operation. After analyzing the factors that influence high-speed railway safety operation in detail, a rough measurement model is finally constructed to describe the operation process. Based on the above considerations, this paper redistricts the safety influence factors of high-speed railway operation as 16 measurement indexes which include staff index, vehicle index, equipment index and environment. And the paper also provides another reasonable and effective theoretical method to solve the safety problems of multiple attribute measurement in high-speed railway operation. As while as analyzing the operation data of 10 pivotal railway lines in China, this paper respectively uses the rough set-based measurement model and value function model (one model for calculating the safety value) for calculating the operation safety value. The calculation result shows that the curve of safety value with the proposed method has smaller error and greater stability than the value function method's, which verifies the feasibility and effectiveness.

Impact Capacity Reduction in Railway Prestressed Concrete Sleepers with Surface Abrasions

NASA Astrophysics Data System (ADS)

Ngamkhanong, Chayut; Li, Dan; Kaewunruen, Sakdirat

2017-10-01

Railway sleepers (also called ‘railroad tie’ in North America) embedded in ballasted railway tracks are a main part of railway track structures. Its important role is to transfer the loads evenly from the rails to a wider area of ballast bed and to secure rail gauge and enable safe passages of rolling stocks. By nature, railway infrastructure is nonlinear, evidenced by its behaviours, geometry and alignment, wheel-rail contact and operational parameters such as tractive efforts. Based on our critical review, the dynamic behaviour of railway sleepers has not been fully investigated, especially when the sleepers are deteriorated by excessive wears. In fact, the ballast angularity causes differential abrasions on the soffit or bottom surface of sleepers (especially at railseat zone). Furthermore, in sharp curves and rapid gradient change, longitudinal and lateral dynamics of rails increase the likelihood of railseat abrasions in concrete sleepers due to the unbalanced loading conditions. This paper presents a structural capacity of concrete sleepers under dynamic transient loading. The modified compression field theory for ultimate strength design of concrete sleepers under impact loading will be highlighted in this study. The influences of surface abrasions, including surface abrasion and soffit abrasion, on the dynamic behaviour of prestressed concrete sleepers, are firstly highlighted. The outcome of this study will improve the rail maintenance and inspection criteria in order to establish appropriate and sensible remote track condition monitoring network in practice. Moreover, this study will also improve the understanding of the fundamental dynamic behaviour of prestressed concrete sleepers with surface abrasions. The insight into these behaviours will not only improve safety and reliability of railway infrastructure but will enhance the structural safety of other concrete structures.

The Development of Model for Measuring Railway Wheels Manufacturing Readiness Level

NASA Astrophysics Data System (ADS)

Inrawan Wiratmadja, Iwan; Mufid, Anas

2016-02-01

In an effort to grow the railway wheel industry in Indonesia and reduce the dependence on imports, Metal Industries Development Center (MIDC) makes the implementation of the railway wheel manufacturing technology in Indonesia. MIDC is an institution based on research and development having a task to research the production of railway wheels prototype and acts as a supervisor to the industry in Indonesia, for implementing the railway wheel manufacturing technology. The process of implementing manufacturing technology requires a lot of resources. Therefore it is necessary to measure the manufacturing readiness process. Measurement of railway wheels manufacturing readiness was in this study done using the manufacturing readiness level (MRL) model from the United States Department of Defense. MRL consists of 10 manufacturing readiness levels described by 90 criteria and 184 sub-criteria. To get a manufacturing readiness measurement instrument that is good and accurate, the development process involved experts through expert judgment method and validated with a content validity ratio (CVR). Measurement instrument developed in this study consist of 448 indicators. The measurement results show that MIDC's railway wheels manufacturing readiness is at the level 4. This shows that there is a gap between the current level of manufacturing readiness owned by MIDC and manufacturing readiness levels required to achieve the program objectives, which is level 5. To achieve the program objectives at level 5, a number of actions were required to be done by MIDC. Indicators that must be improved to be able to achieve level 5 are indicators related to the cost and financing, process capability and control, quality management, workers, and manufacturing management criteria.

Large-scale application of the flood damage model RAilway Infrastructure Loss (RAIL)

NASA Astrophysics Data System (ADS)

Kellermann, Patric; Schönberger, Christine; Thieken, Annegret H.

2016-11-01

Experience has shown that river floods can significantly hamper the reliability of railway networks and cause extensive structural damage and disruption. As a result, the national railway operator in Austria had to cope with financial losses of more than EUR 100 million due to flooding in recent years. Comprehensive information on potential flood risk hot spots as well as on expected flood damage in Austria is therefore needed for strategic flood risk management. In view of this, the flood damage model RAIL (RAilway Infrastructure Loss) was applied to estimate (1) the expected structural flood damage and (2) the resulting repair costs of railway infrastructure due to a 30-, 100- and 300-year flood in the Austrian Mur River catchment. The results were then used to calculate the expected annual damage of the railway subnetwork and subsequently analysed in terms of their sensitivity to key model assumptions. Additionally, the impact of risk aversion on the estimates was investigated, and the overall results were briefly discussed against the background of climate change and possibly resulting changes in flood risk. The findings indicate that the RAIL model is capable of supporting decision-making in risk management by providing comprehensive risk information on the catchment level. It is furthermore demonstrated that an increased risk aversion of the railway operator has a marked influence on flood damage estimates for the study area and, hence, should be considered with regard to the development of risk management strategies.

An overview: modern techniques for railway vehicle on-board health monitoring systems

NASA Astrophysics Data System (ADS)

Li, Chunsheng; Luo, Shihui; Cole, Colin; Spiryagin, Maksym

2017-07-01

Health monitoring systems with low-cost sensor networks and smart algorithms are always needed in both passenger trains and heavy haul trains due to the increasing need for reliability and safety in the railway industry. This paper focuses on an overview of existing approaches applied for railway vehicle on-board health monitoring systems. The approaches applied in the data measurement systems and the data analysis systems in railway on-board health monitoring systems are presented in this paper, including methodologies, theories and applications. The pros and cons of the various approaches are analysed to determine appropriate benchmarks for an effective and efficient railway vehicle on-board health monitoring system. According to this review, inertial sensors are the most popular due to their advantages of low cost, robustness and low power consumption. Linearisation methods are required for the model-based methods which would inevitably introduce error to the estimation results, and it is time-consuming to include all possible conditions in the pre-built database required for signal-based methods. Based on this review, future development trends in the design of new low-cost health monitoring systems for railway vehicles are discussed.

Rail-lex Slovenia--A Modern Railway Dictionary (Joint Venture Case Study).

ERIC Educational Resources Information Center

Jakopin, Primoz

Rail-lex Slovenia is a project to develop a dictionary of railway terminology in the Slovenian language, part of a larger undertaking of the International Union of Railways to develop a modern, multilingual communication infrastructure. Participating organizations represent 22 European languages. Two partners in the Rail-lex Slovenia venture are…

Seismic impact of the railway on the geotechnical constructions

NASA Astrophysics Data System (ADS)

Stolárik, Martin; Pinka, Miroslav

2017-09-01

Nowadays, the focus on more ecological means of material and persons transport is still higher. Big loads can be transported on railways more effectively and with lower environment impact than on roads. The geotechnical structures are inherent parts of railway infrastructure, such as embankments, sides of notches and, of course, tunnels, foundation constructions of buildings or pillars of bridges and the others geotechnical constructions (e.g. retaining walls, culverts, transition area of bridges). By train pass, vibrations are caused and these vibrations are relayed to the soil. These vibrations can make adverse impact to surrounding objects and to technologies placed in. This so far uncared-for influence gets into the foreground by current trend of everyday life technical equipment increasing. The article introduces different kinds of geotechnical structures and the influence of by-passing railway transport on their constructions and surroundings. The data are evaluated in the amplitude and frequency domain.

Vibration syndrome in railway track maintenance workers.

PubMed

Virokannas, H; Anttonen, H; Niskanen, J

1995-01-01

An inquiry was sent to all railway maintenance workers in three railway districts in Finland and hand-arm vibration was measured on the handlebars of tools used by maintenance workers. The study group included 252 (82%) subjects, whose mean age was 41 years and who had worked in track maintenance for 14 years (SD 9). In Finland there are over 600 railway maintenance workers who use vibrating tools. The frequency-weighted acceleration of hand-arm vibration was calculated according to the ISO 5349 standard. Hand-held tamping machines had caused most of the vibration exposure, and aw4h was 10.6 m/s2 measured on the handlebar of tamping machine, but many workers also used other vibrating tools. The annual vibration level was 2.5 m/s2 when the use of all vibrating tools and the exposure time was taken into account. In the questionnaire the prevalence of vibration-induced white finger (VWF) was 14% in the entire material, and the prevalence of VWF increased significantly with the total duration of the maintenance work. In addition, 39% of the subjects had suffered numbness of the hands, and the prevalence of hand numbness also increased significantly with the total duration of maintenance work. According to the measurements of vibration and the prevalence of hand symptoms the present investigation indicates vibration syndrome as being related to railway track maintenance work. In the exposure group, where tamping machines mainly were used and exposure to other vibration was small, the prevalence of VWF was also significantly higher, but the prevalence of hand numbness insignificant compared with the control group. In this study vascular and nerve hand symptoms were considered to cause serious trouble in work by 4-11% of the maintenance workers.

Instructor Training on British Railways

ERIC Educational Resources Information Center

Gibson, J. D.

1970-01-01

The value of instructor training was recognized by British Railways as early as 1950 with the setting up of a training center at Darlington. This article shows the results of this continuous training experience in the benefits to be obtained from re-appraisal techniques and practical work. (Author/EB)

Exposure-response relationships for annoyance due to freight and passenger railway vibration exposure in residential environments.

PubMed

Sharp, Calum; Woodcock, James; Sica, Gennaro; Peris, Eulalia; Moorhouse, Andrew T; Waddington, David C

2014-01-01

In this work, exposure-response relationships for annoyance due to freight and passenger railway vibration exposure in residential environments are developed, so as to better understand the differences in human response to these two sources of environmental vibration. Data for this research come from a field study comprising interviews with respondents and measurements of their vibration exposure (N = 752). A logistic regression model is able to accurately classify 96% of these measured railway vibration signals as freight or passenger based on two signal properties that quantify the duration and low frequency content of each signal. Exposure-response relationships are then determined using ordinal probit modeling with fixed thresholds. The results indicate that people are able to distinguish between freight and passenger railway vibration, and that the annoyance response due to freight railway vibration is significantly higher than that due to passenger railway vibration, even for equal levels of exposure. In terms of a community tolerance level, the population studied is 15 dB (re 10(-6) m s(-2)) more tolerant to passenger railway vibration than freight railway vibration. These results have implications for the expansion of freight traffic on rail, or for policies to promote passenger railway.

Flow assignment model for quantitative analysis of diverting bulk freight from road to railway

PubMed Central

Liu, Chang; Wang, Jiaxi; Xiao, Jie; Liu, Siqi; Wu, Jianping; Li, Jian

2017-01-01

Since railway transport possesses the advantage of high volume and low carbon emissions, diverting some freight from road to railway will help reduce the negative environmental impacts associated with transport. This paper develops a flow assignment model for quantitative analysis of diverting truck freight to railway. First, a general network which considers road transportation, railway transportation, handling and transferring is established according to all the steps in the whole transportation process. Then general functions which embody the factors which the shippers will pay attention to when choosing mode and path are formulated. The general functions contain the congestion cost on road, the capacity constraints of railways and freight stations. Based on the general network and general cost function, a user equilibrium flow assignment model is developed to simulate the flow distribution on the general network under the condition that all shippers choose transportation mode and path independently. Since the model is nonlinear and challenging, we adopt a method that uses tangent lines to constitute envelope curve to linearize it. Finally, a numerical example is presented to test the model and show the method of making quantitative analysis of bulk freight modal shift between road and railway. PMID:28771536

Highway-railway at-grade crossing structures : trackbed and surface pressure measurements and assessments.

DOT National Transportation Integrated Search

2009-05-01

Techniques are described for installing instrumentation within highway/railway crossings - to measure vertical pressures under moving highway and railway loadings - using earth pressure cells. Also, techniques are described for installing instrumenta...

Towards the Internet of Smart Trains: A Review on Industrial IoT-Connected Railways.

PubMed

Fraga-Lamas, Paula; Fernández-Caramés, Tiago M; Castedo, Luis

2017-06-21

Nowadays, the railway industry is in a position where it is able to exploit the opportunities created by the IIoT (Industrial Internet of Things) and enabling communication technologies under the paradigm of Internet of Trains. This review details the evolution of communication technologies since the deployment of GSM-R, describing the main alternatives and how railway requirements, specifications and recommendations have evolved over time. The advantages of the latest generation of broadband communication systems (e.g., LTE, 5G, IEEE 802.11ad) and the emergence of Wireless Sensor Networks (WSNs) for the railway environment are also explained together with the strategic roadmap to ensure a smooth migration from GSM-R. Furthermore, this survey focuses on providing a holistic approach, identifying scenarios and architectures where railways could leverage better commercial IIoT capabilities. After reviewing the main industrial developments, short and medium-term IIoT-enabled services for smart railways are evaluated. Then, it is analyzed the latest research on predictive maintenance, smart infrastructure, advanced monitoring of assets, video surveillance systems, railway operations, Passenger and Freight Information Systems (PIS/FIS), train control systems, safety assurance, signaling systems, cyber security and energy efficiency. Overall, it can be stated that the aim of this article is to provide a detailed examination of the state-of-the-art of different technologies and services that will revolutionize the railway industry and will allow for confronting today challenges.

Towards the Internet of Smart Trains: A Review on Industrial IoT-Connected Railways

PubMed Central

Fraga-Lamas, Paula; Fernández-Caramés, Tiago M.; Castedo, Luis

2017-01-01

Nowadays, the railway industry is in a position where it is able to exploit the opportunities created by the IIoT (Industrial Internet of Things) and enabling communication technologies under the paradigm of Internet of Trains. This review details the evolution of communication technologies since the deployment of GSM-R, describing the main alternatives and how railway requirements, specifications and recommendations have evolved over time. The advantages of the latest generation of broadband communication systems (e.g., LTE, 5G, IEEE 802.11ad) and the emergence of Wireless Sensor Networks (WSNs) for the railway environment are also explained together with the strategic roadmap to ensure a smooth migration from GSM-R. Furthermore, this survey focuses on providing a holistic approach, identifying scenarios and architectures where railways could leverage better commercial IIoT capabilities. After reviewing the main industrial developments, short and medium-term IIoT-enabled services for smart railways are evaluated. Then, it is analyzed the latest research on predictive maintenance, smart infrastructure, advanced monitoring of assets, video surveillance systems, railway operations, Passenger and Freight Information Systems (PIS/FIS), train control systems, safety assurance, signaling systems, cyber security and energy efficiency. Overall, it can be stated that the aim of this article is to provide a detailed examination of the state-of-the-art of different technologies and services that will revolutionize the railway industry and will allow for confronting today challenges. PMID:28635672

Effects of heavy metal pollution on enzyme activities in railway cut slope soils.

PubMed

Meng, Xiaoyi; Ai, Yingwei; Li, Ruirui; Zhang, Wenjuan

2018-03-07

Railway transportation is an important transportation mode. However, railway transportation causes heavy metal pollution in surrounding soils. Heavy metal pollution has a serious negative impact on the natural environment, including a decrease of enzyme activities in soil and degradation of sensitive ecosystems. Some studies investigated the heavy metal pollution at railway stations or certain transportation hubs. However, the pollution accumulated in artificial cut slope soil all along the rails is still questioned. The interest on non-point source pollution from railways is increasing in an effort to protect the soil quality along the line. In this study, we studied spatial distributions of heavy metals and five enzyme activities, i.e., urease (UA), saccharase (SAC), protease (PRO), catalase (CAT), and polyphenol oxidase (POA) in the soil, and the correlation among them beside three different railways in Sichuan Province, China, as well. Soil samples were respectively collected from 5, 10, 25, 50, 100, and 150 m away from the rails (depth of 0-8 cm). Results showed that Mn, Cd, Cu, and Zn were influenced by railway transportation in different degrees while Pb was not. Heavy metal pollution was due to the abrasion of the gravel bed as well as the tracks and freight transportation which caused more heavy metal pollution than passenger transportation. Enzymatic activities were significantly negatively correlated with heavy metals in soils, especially Zn and Cu. Finally, it is proposed that combined use of PRO and POA activities could be an indicator of the heavy metal pollution in cut slope soils. The protective measures aimed at heavy metal pollution caused by railway transportation in cut slope soils are urgent.

Examining nocturnal railway noise and aircraft noise in the field: sleep, psychomotor performance, and annoyance.

PubMed

Elmenhorst, Eva-Maria; Pennig, Sibylle; Rolny, Vinzent; Quehl, Julia; Mueller, Uwe; Maaß, Hartmut; Basner, Mathias

2012-05-01

Traffic noise is interfering during day- and nighttime causing distress and adverse physiological reactions in large parts of the population. Railway noise proved less annoying than aircraft noise in surveys which were the bases for a so called 5 dB railway bonus regarding noise protection in many European countries. The present field study investigated railway noise-induced awakenings during sleep, nighttime annoyance and the impact on performance the following day. Comparing these results with those from a field study on aircraft noise allowed for a ranking of traffic modes concerning physiological and psychological reactions. 33 participants (mean age 36.2 years ± 10.3 (SD); 22 females) living alongside railway tracks around Cologne/Bonn (Germany) were polysomnographically investigated. These data were pooled with data from a field study on aircraft noise (61 subjects) directly comparing the effects of railway and aircraft noise in one random subject effects logistic regression model. Annoyance was rated in the morning evaluating the previous night. Probability of sleep stage changes to wake/S1 from railway noise increased significantly from 6.5% at 35 dB(A) to 20.5% at 80 dB(A) LAFmax. Rise time of noise events had a significant impact on awakening probability. Nocturnal railway noise led to significantly higher awakening probabilities than aircraft noise, partly explained by the different rise times, whereas the order was inversed for annoyance. Freight train noise compared to passenger train noise proved to have the most impact on awakening probability. Nocturnal railway noise had no effect on psychomotor vigilance. Nocturnal freight train noise exposure in Germany was associated with increased awakening probabilities exceeding those for aircraft noise and contrasting the findings of many annoyance surveys and annoyance ratings of our study. During nighttime a bonus for railway noise seems not appropriate. Copyright © 2012 Elsevier B.V. All rights reserved.

A current review of high speed railways experiences in Asia and Europe

NASA Astrophysics Data System (ADS)

Purba, Aleksander; Nakamura, Fumihiko; Dwsbu, Chatarina Niken; Jafri, Muhammad; Pratomo, Priyo

2017-11-01

High-Speed Railways (HSR) is currently regarded as one of the most significant technological breakthroughs in passenger transportation developed in the second half of the 20th century. At the beginning of 2008, there were about 10,000 kilometers of new high-speed lines in operation in Asia and Europe regions to provide high-speed services to passengers willing to pay for lower travel time and quality improvement in rail transport. And since 2010, HSR itself has received a great deal of attention in Indonesia. Some transportation analysts contend that Indonesia, particularly Java and Sumatera islands need a high-speed rail network to be economically competitive with countries in Asia and Europe. On April 2016, Indonesia-China consortium Kereta Cepat Indonesia China (KCIC) signed an engineering, procurement, and construction contract to build the HSR with a consortium of seven companies called the High-Speed Railway Contractor Consortium. The HSR is expected to debut by May 2019, offering a 45-minute trip covering a roughly 150 km route. However, building, maintaining and operating HSR line is expensive; it involves a significant amount of sunk costs and may substantially compromise both the transport policy of a country and the development of its transport sector for decades. The main objective of this paper is to discuss some characteristics of the HSR services from an economic viewpoint, while simultaneously developing an empirical framework that should help us to understand, in more detail, the factors determining the success of the HSR as transport alternative based on current experiences of selected Asian and European countries.

Patent holdings of US biotherapeutic companies in major markets.

PubMed

Sebastian, Teena E; Yerram, Chandra Bindu; Saberwal, Gayatri

2009-05-01

In previous studies we examined the (United States, US) patent holdings of 109 largely North American biotech companies developing therapeutics that, in particular, have an interest in discovery stage science. There appears little correlation between the number of patents and the number of products of individual companies. Here we quantified and compared the 103 US-headquartered companies' patent holdings in Australia, Canada, Europe, Japan and the US. The companies demonstrate variable and surprising patterns of patent holdings across these countries or regions. For most companies, patent holdings are not in proportion to the importance of the country as a biotech or pharma market. These results have implications for the patenting strategies of small biotech companies involved in drug discovery.

A new method of power load prediction in electrification railway

NASA Astrophysics Data System (ADS)

Dun, Xiaohong

2018-04-01

Aiming at the character of electrification railway, the paper mainly studies the problem of load prediction in electrification railway. After the preprocessing of data, and the similar days are separated on the basis of its statistical characteristics. Meanwhile the accuracy of different methods is analyzed. The paper provides a new thought of prediction and a new method of accuracy of judgment for the load prediction of power system.

Using of New Management Approaches in the Field of Personal Marketing in the Transport Company

NASA Astrophysics Data System (ADS)

Matusova, Dominika; Gogolova, Martina

2017-10-01

Personal marketing is a relatively new field in the theory and practice of human resources (HR) activities in the corporate and business sector. As a separate area of HR management was established of the earmarking of personnel management. In the article is mentioned about the facility manager. This position introduces a specific category - behaviour of manager. The facility manager has to dispose the skills from the areas: operation and maintenance, property, facility management processes, human factors of environment, planning, function devices, finance and quality management and innovation and communication. In the article is described the situation in transport company, specifically - Railway Company Slovakia, Inc. (ZSSK). Employees of the company works in departments as: managers, sellers, operators for services and maintenance, economists and controllers. The transport company had 5949 employees in 2015. That was about 108 employees more than the previous year. Facility manager and the company, set the targets which want to achieve within the planned time. Beyond the objectives are fundamental the values of company, business vision and mission.

Fatal accidents at railway level crossings in Great Britain 1946-2009.

PubMed

Evans, Andrew W

2011-09-01

This paper investigates fatal accidents and fatalities at level crossings in Great Britain over the 64-year period 1946-2009. The numbers of fatal accidents and fatalities per year fell by about 65% in the first half of that period, but since then have remained more or less constant at about 11 fatal accidents and 12 fatalities per year. At the same time other types of railway fatalities have fallen, so level crossings represent a growing proportion of the total. Nevertheless, Britain's level crossing safety performance remains good by international standards. The paper classifies level crossings into three types: railway-controlled, automatic, and passive. The safety performance of the three types of crossings has been very different. Railway-controlled crossings are the best-performing crossing type, with falling fatal accident rates. Automatic crossings have higher accident rates per crossing than railway controlled or passive crossings, and the accident rates have not decreased. Passive crossings are by far the most numerous, but many have low usage by road users. Their fatal accident rate has remained remarkably constant over the whole period at about 0.9 fatal accidents per 1000 crossings per year. A principal reason why fatal accidents and fatalities have not fallen in the second half of the period as they did in the first half is the increase in the number of automatic crossings, replacing the safer railway controlled crossings on some public roads. However, it does not follow that this replacement was a mistake, because automatic crossings have advantages over controlled crossings in reducing delays to road users and in not needing staff. Based on the trends for each type of crossing and for pedestrian and non-pedestrian accidents separately, in 2009 a mean of about 5% of fatal accidents were at railway controlled crossings, 52% were at automatic crossings, and 43% were at passive crossings. Fatalities had similar proportions. About 60% of fatalities were

Mitigation of landslide area around railway tunnel, South Sumatra Province, Indonesia

NASA Astrophysics Data System (ADS)

Toha, M. Taufik; Setiabudidaya, Dedi; Komar, Syamsul; Bochori, Ghadafi, Moamar A.; Adiwarman, Mirza; Rahim, S. E.

2017-09-01

Adequate and safe railway line infrastructures as well as facilities are required to support the rail transport system in South Sumatra. The slope stability along railway line of Lahat-Lubuk Linggau South Sumatra were studied during landslide that occured on January 23th, 2016. The landslide occurred on the mouth of railway tunnel in Gunung Gajah Village, Lahat District that causing the railway transportation system had to be stopped for a few days. A comprehensive research was conducted to analyze the causes of the landslide and to identify other landslide risky areas along the railway line Lahat-Lubuk Linggau. The research activities included surveying, sampling, laboratory testing, investigating condition of geology, geotechnics, hydrogeology/hydrology, morphology and land use. The factors that cause landslide in the past studies were found to be morphology, structural geology, physical and mechanical characteristics, hydrogeology, hydrology, external forces (train vibration, earthquake). Results back analysis of slope stability when the landslide occurred showed that the value Safety Factor (SF) = 1, angle of friction = 0°, and cohesion = 0.49 kg/cm2 (49 kPa). Based on the observation and analysis of the condition of the morphology and orientation of the structure of the rock layers, there was a location prone to landslide (labile) in the surrounding area of the landslide. Mitigations to potential landslide in adjacent area were building a retaining wall, draining channels, and shortcrete at the rock wall after landslides and maintaining the land use around the slopes.

Geographic distribution of suicide and railway suicide in Belgium, 2008-2013: a principal component analysis.

PubMed

Strale, Mathieu; Krysinska, Karolina; Overmeiren, Gaëtan Van; Andriessen, Karl

2017-06-01

This study investigated the geographic distribution of suicide and railway suicide in Belgium over 2008--2013 on local (i.e., district or arrondissement) level. There were differences in the regional distribution of suicide and railway suicides in Belgium over the study period. Principal component analysis identified three groups of correlations among population variables and socio-economic indicators, such as population density, unemployment, and age group distribution, on two components that helped explaining the variance of railway suicide at a local (arrondissement) level. This information is of particular importance to prevent suicides in high-risk areas on the Belgian railway network.

Creosote released from railway-ties recycled and the sanitary risks.

PubMed

Zicari, Giuseppe; Allegro, Giuseppe; Russo, Domenico; Rivetti, Daniela; Soardo, Vincenzo; Cerrato, Elena

2013-01-01

Through the history of railways, wooden crossties impregnated with potentially hazardous creosote tar, have been used for years. There are six major classes of compounds in the creosote: aromatic hydrocarbons; tar acids/phenolics; tar bases/nitrogen-containing heterocycles; aromatic amines; sulfur-containing heterocycles; and oxygen-containing heterocycles. The creosote molecules applied in railway crossties can be released in the environment and they can bioaccumulate in animals and vegetables. Some constituents (benzo(a)pyrene and phenolics like benzene) are considered as being carcinogenic which renders the entire complex of creosote to be classified as potentially carcinogenic. After several decades of use the railway-ties are been recycled for varies uses like fences, stakes for agriculture and fruit production or bank protection. In this paper are examined some environmental and sanitary risks from wood impregnated with creosote reported in the literature.

Development of a guide for prioritization of railway bridges for repair and replacement.

DOT National Transportation Integrated Search

2013-09-01

The objective of this study was to develop evaluation bases for the repair, rehabilitation, and replacement of existing : railway bridges. Considering the importance of bridges to the railway network, the research involved the review and : analysis o...

[Work condition of electricians servicing railway shunting and maneuvering yards].

PubMed

Talivanova, R V; Elizarov, B B; Kudrin, V A; Ovechkina, Zh V

1995-01-01

The article represents main occupational hazards and work conditions of such railway occupation as electromechanic and electromounter of shunting yards of railway stations. Complete hygienic evaluation of the occupational activities is given for individuals working at Moskovskaya, Oktjabrskaya and Sevemaya railroads. Health state of the workers was studied according to transitory disablement materials, the morbidity and its structure were analyzed. The authors outline some suggestions to improve the work conditions and decrease the morbidity.

Leukemia and brain tumors in Norwegian railway workers, a nested case-control study.

PubMed

Tynes, T; Jynge, H; Vistnes, A I

1994-04-01

In an attempt to assess whether exposure to electromagnetic fields on Norwegian railways induces brain tumors or leukemia, the authors conducted a nested case-control study of railway workers based on incident cases from the Cancer Registry of Norway in a cohort of 13,030 male Norwegian railway workers who had worked on either electric or non-electric railways. The cohort comprised railway line, outdoor station, and electricity workers. The case series comprised 39 men with brain tumors and 52 men with leukemia (follow-up, 1958-1990). Each case was matched on age with four or five controls selected from the same cohort. The exposure of each study subject to electric and magnetic fields was evaluated from cumulative exposure measures based on present measurements and historical data. Limited information on potential confounders such as creosote, solvents, and herbicides was also collected; information on whether the subject had smoked was obtained by interviews with the subjects or work colleagues. The case-control analysis showed that men employed on electric railways, compared with non-electric ones, had an odds ratio for leukemia of 0.70 (adjusted for smoking) and an odds ratio for brain tumor of 0.87. No significant trend was shown for exposure to either magnetic or electric fields. These results do not support an association between exposure to 16 2/3-Hertz electric or magnetic fields and the risk for leukemia or brain tumors.

An investigation of neighborhood-level social, economic and physical factors for railway suicide in Victoria, Australia.

PubMed

Too, Lay San; Spittal, Matthew J; Bugeja, Lyndal; Milner, Allison; Stevenson, Mark; McClure, Roderick

2015-09-01

This study investigates the associations between railway suicide and neighborhood social, economic, and physical determinants using postcode-level data. It also examines whether the associations are influenced by having high concentration of high-risk individuals in a neighborhood area. Railway suicide cases from Victoria, Australia for the period of 2001-2012, their age, sex, year of death, usual residential address and suicide location were obtained from the National Coronial Information System. Univariate negative binomial regression models were used to estimate the association between railway suicide and neighborhood-level social, economic and physical factors. Variables which were significant in these univariate models were then assessed in a multivariate model, controlling for age and sex of the deceased and other known confounders. Findings from the multivariate analysis indicate that an elevated rate of railway suicide was strongly associated with neighborhood exposure of higher number of railway stations (IRR=1.30 95% CI=1.16-1.46). Other significant neighborhood risk factors included patronage volume (IRR=1.06, 95% CI=1.02-1.11) and train frequency (IRR=1.02, 95% CI=1.01-1.04). An increased number of video surveillance systems at railway stations and carparks was significantly associated with a modest reduction in railway suicide risk (IRR=0.93, 95% CI=0.88-0.98). These associations were independent of concentration of high-risk individuals. Railway suicide may be under-reported in Australia. Interventions to prevent railway suicide should target vulnerable individuals residing in areas characterized by high station density, patronage volume and train frequency. Copyright © 2015 Elsevier B.V. All rights reserved.

Assess the feasibility of the high-speed railway construction in China by measuring the traffic demand elastic

NASA Astrophysics Data System (ADS)

Yu, Nan; Cao, Yu

2017-05-01

The traffic demand elastic is proposed as a new indicator in this study to measure the feasibility of the high-speed railway construction in a more intuitive way. The Matrix Completion (MC) and Semi-Supervised Support Vector Machine (S3VM) are used to realize the measurement and prediction of this index on the basis of the satisfaction investigation on the 326 inter-city railways in china. It is demonstrated that instead of calculating the economic benefits brought by the construction of high-speed railway, this indicator can find the most urgent railways to be improved by directly evaluate the existing railway facilities from the perspective of transportation service improvement requirements.

Diagnosis diagrams for passing signals on an automatic block signaling railway section

NASA Astrophysics Data System (ADS)

Spunei, E.; Piroi, I.; Chioncel, C. P.; Piroi, F.

2018-01-01

This work presents a diagnosis method for railway traffic security installations. More specifically, the authors present a series of diagnosis charts for passing signals on a railway block equipped with an automatic block signaling installation. These charts are based on the exploitation electric schemes, and are subsequently used to develop a diagnosis software package. The thus developed software package contributes substantially to a reduction of failure detection and remedy for these types of installation faults. The use of the software package eliminates making wrong decisions in the fault detection process, decisions that may result in longer remedy times and, sometimes, to railway traffic events.

Delays in new drug applications in Japan and industrial R&D strategies.

PubMed

Hirai, Y; Kinoshita, H; Kusama, M; Yasuda, K; Sugiyama, Y; Ono, S

2010-02-01

The gap between Japan and both the United States (US) and the European Union (EU) with regard to access to new drugs is becoming a major issue in Japan. We analyzed the time lags involved in new drug application (NDA) and biological license application submissions in Japan, the US, and the EU in order to identify the causes of delayed access. The time lag related to submission of applications ("submission lag") was longer for in-licensed products and for non-Japanese companies. Factors related to costs of clinical studies and potential volumes of sales were not associated with the submission lag. A bridging strategy (extrapolative use of foreign clinical data in the clinical data package based on International Conference on Harmonisation guideline E5) seemed to reduce submission lag, but the association between the two diminished when the cause-and-effect relationship was specifically investigated. These results suggest that multinational companies are likely to place more emphasis on the choice of development strategies that successfully lead to their goal rather than on direct costs and expected sales when deciding to introduce their pharmaceutical products in Japan. Our findings indicate that the clinical development guidances that helps pharmaceutical companies decide on investment and strategies are also the key to narrowing the gap in access to new drugs.

Toward an Application Guide for Safety Integrity Level Allocation in Railway Systems.

PubMed

Ouedraogo, Kiswendsida Abel; Beugin, Julie; El-Koursi, El-Miloudi; Clarhaut, Joffrey; Renaux, Dominique; Lisiecki, Frederic

2018-02-02

The work in the article presents the development of an application guide based on feedback and comments stemming from various railway actors on their practices of SIL allocation to railway safety-related functions. The initial generic methodology for SIL allocation has been updated to be applied to railway rolling stock safety-related functions in order to solve the SIL concept application issues. Various actors dealing with railway SIL allocation problems are the intended target of the methodology; its principles will be summarized in this article with a focus on modifications and precisions made in order to establish a practical guide for railway safety authorities. The methodology is based on the flowchart formalism used in CSM (common safety method) European regulation. It starts with the use of quantitative safety requirements, particularly tolerable hazard rates (THR). THR apportioning rules are applied. On the one hand, the rules are related to classical logical combinations of safety-related functions preventing hazard occurrence. On the other hand, to take into account technical conditions (last safety weak link, functional dependencies, technological complexity, etc.), specific rules implicitly used in existing practices are defined for readjusting some THR values. SIL allocation process based on apportioned and validated THR values is finally illustrated through the example of "emergency brake" subsystems. Some specific SIL allocation rules are also defined and illustrated. © 2018 Society for Risk Analysis.

20 CFR 202.13 - Electric railways.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Electric railways. 202.13 Section 202.13 Employees' Benefits RAILROAD RETIREMENT BOARD REGULATIONS UNDER THE RAILROAD RETIREMENT ACT EMPLOYERS UNDER... conclusion reached the question will be submitted to the Interstate Commerce Commission for determination...

High Rate of Awarding Compensation for Claims of Injuries Related to Clinical Trials by Pharmaceutical Companies in Japan: A Questionnaire Survey

PubMed Central

Kurihara, Chieko; Kusuoka, Hideo; Ono, Shunsuke; Kakee, Naoko; Saito, Kazuyuki; Takehara, Kenji; Tsujide, Kiyokazu; Nabeoka, Yuzo; Sakuhiro, Takuya; Aoki, Hiroshi; Morishita, Noriko; Suzuki, Chieko; Kachi, Shigeo; Kondo, Emiko; Komori, Yukiko; Isobe, Tetsu; Kageyama, Shigeru; Watanabe, Hiroshi

2014-01-01

Introduction International norms and ethical standards have suggested that compensation for research-related injury should be provided to injured research volunteers. However, statistical data of incidence of compensation claims and the rate of awarding them have been rarely reported. Method Questionnaire surveys were sent to pharmaceutical companies and medical institutions, focusing on industry-initiated clinical trials aiming at new drug applications (NDAs) on patient volunteers in Japan. Results With the answers from pharmaceutical companies, the incidence of compensation was 0.8%, including 0.06% of monetary compensation. Of the cases of compensation claims, 99% were awarded. In turn, with the answers from medical institutions, the incidence of compensation was 0.6%, including 0.4% of serious but not death cases, and 0.04% of death cases. Furthermore, most claims for compensation were initiated by medical institutions, rather than by the patients. On the other hand, with the answers from clinical trial volunteers, 3% of respondents received compensations. These compensated cases were 25% of the injuries which cannot be ruled out from the scope of compensation. Conclusion Our study results demonstrated that Japanese pharmaceutical companies have provided a high rate of compensation for clinical trial-related injuries despite the possibility of overestimation. In the era of global clinical development, our study indicates the importance of further surveys to find each country's compensation policy by determining how it is being implemented based on a survey of the actual status of compensation coming from statistical data. PMID:24416332

Japan nurtures telecommunications on classic formula

NASA Astrophysics Data System (ADS)

Davis, Neil

1987-03-01

As in other industrial sectors, Japanese telecommunications organizations export significantly more products than they import, even when substantial cost-savings can be realized. One example is optical fibers, which some Japanese service companies do not buy from outside suppliers who have taken advantage of economies of scale. Nippon Telephone and Telegraph, until recently a common carrier, is meeting increasing competition from newly-formed indigenous telecommunications subsidiaries who are taking advantage of fiber optics and microwave communications capabilities. Various cooperative projects with U.S. companies are described, noting the tendency of Japanese manufacturers to cease relationships with U.S. companies when Japanese products become competitive and also the necessity of U.S. firms to gain political cooperation from the Japanese government in order to make sales in Japan.

Interaction between a railway track and uniformly moving tandem wheels

NASA Astrophysics Data System (ADS)

Belotserkovskiy, P. M.

2006-12-01

Interaction among loaded wheels via railway track is studied. The vertical parametric oscillations of an infinite row of identical equally spaced wheels, bearing constant load and uniformly moving over a railway track, are calculated by means of Fourier series technique. If the distance between two consecutive wheels is big enough, then one can disregard their interaction via the railway track and consider every wheel as a single one. In this case, however, the Fourier series technique represents an appropriate computation time-saving approximation to a Fourier integral transformation technique that describes the oscillations of a single moving wheel. Two schemes are considered. In the first scheme, every wheel bears the same load. In the second one, consecutive wheels bear contrarily directed loads of the same magnitude. The second scheme leads to simpler calculations and so is recommended to model the wheel-track interaction. The railway track periodicity due to sleeper spacing is taken into account. Each period is the track segment between two adjacent sleepers. A partial differential equation with constant coefficients governs the vertical oscillations of each segment. Boundary conditions bind the oscillations of two neighbour segments and provide periodicity to the track. The shear deformation in the rail cross-section strongly influences the parametric oscillations. It also causes discontinuity of the rail centre-line slope at any point, where a concentrated transverse force is applied. Therefore, Timoshenko beam properties with respect to the topic of this paper are discussed. Interaction between a railway track and a bogie moving at moderate speed is studied. The study points to influence of the bogie frame oscillations on variation in the wheel-rail contact force over the sleeper span. The simplified bogie model considered includes only the primary suspension. A static load applied to the bogie frame centre presents the vehicle body.

Nonlinear Dynamic Characteristics of the Railway Vehicle

NASA Astrophysics Data System (ADS)

Uyulan, Çağlar; Gokasan, Metin

2017-06-01

The nonlinear dynamic characteristics of a railway vehicle are checked into thoroughly by applying two different wheel-rail contact model: a heuristic nonlinear friction creepage model derived by using Kalker 's theory and Polach model including dead-zone clearance. This two models are matched with the quasi-static form of the LuGre model to obtain more realistic wheel-rail contact model. LuGre model parameters are determined using nonlinear optimization method, which it's objective is to minimize the error between the output of the Polach and Kalker model and quasi-static LuGre model for specific operating conditions. The symmetric/asymmetric bifurcation attitude and stable/unstable motion of the railway vehicle in the presence of nonlinearities which are yaw damping forces in the longitudinal suspension system are analyzed in great detail by changing the vehicle speed. Phase portraits of the lateral displacement of the leading wheelset of the railway vehicle are drawn below and on the critical speeds, where sub-critical Hopf bifurcation take place, for two wheel-rail contact model. Asymmetric periodic motions have been observed during the simulation in the lateral displacement of the wheelset under different vehicle speed range. The coexistence of multiple steady states cause bounces in the amplitude of vibrations, resulting instability problems of the railway vehicle. By using Lyapunov's indirect method, the critical hunting speeds are calculated with respect to the radius of the curved track parameter changes. Hunting, which is defined as the oscillation of the lateral displacement of wheelset with a large domain, is described by a limit cycle-type oscillation nature. The evaluated accuracy of the LuGre model adopted from Kalker's model results for prediction of critical speed is higher than the results of the LuGre model adopted from Polach's model. From the results of the analysis, the critical hunting speed must be resolved by investigating the track tests

Probabilistic Fatigue Life Updating for Railway Bridges Based on Local Inspection and Repair.

PubMed

Lee, Young-Joo; Kim, Robin E; Suh, Wonho; Park, Kiwon

2017-04-24

Railway bridges are exposed to repeated train loads, which may cause fatigue failure. As critical links in a transportation network, railway bridges are expected to survive for a target period of time, but sometimes they fail earlier than expected. To guarantee the target bridge life, bridge maintenance activities such as local inspection and repair should be undertaken properly. However, this is a challenging task because there are various sources of uncertainty associated with aging bridges, train loads, environmental conditions, and maintenance work. Therefore, to perform optimal risk-based maintenance of railway bridges, it is essential to estimate the probabilistic fatigue life of a railway bridge and update the life information based on the results of local inspections and repair. Recently, a system reliability approach was proposed to evaluate the fatigue failure risk of structural systems and update the prior risk information in various inspection scenarios. However, this approach can handle only a constant-amplitude load and has limitations in considering a cyclic load with varying amplitude levels, which is the major loading pattern generated by train traffic. In addition, it is not feasible to update the prior risk information after bridges are repaired. In this research, the system reliability approach is further developed so that it can handle a varying-amplitude load and update the system-level risk of fatigue failure for railway bridges after inspection and repair. The proposed method is applied to a numerical example of an in-service railway bridge, and the effects of inspection and repair on the probabilistic fatigue life are discussed.

Probabilistic Fatigue Life Updating for Railway Bridges Based on Local Inspection and Repair

PubMed Central

Lee, Young-Joo; Kim, Robin E.; Suh, Wonho; Park, Kiwon

2017-01-01

Railway bridges are exposed to repeated train loads, which may cause fatigue failure. As critical links in a transportation network, railway bridges are expected to survive for a target period of time, but sometimes they fail earlier than expected. To guarantee the target bridge life, bridge maintenance activities such as local inspection and repair should be undertaken properly. However, this is a challenging task because there are various sources of uncertainty associated with aging bridges, train loads, environmental conditions, and maintenance work. Therefore, to perform optimal risk-based maintenance of railway bridges, it is essential to estimate the probabilistic fatigue life of a railway bridge and update the life information based on the results of local inspections and repair. Recently, a system reliability approach was proposed to evaluate the fatigue failure risk of structural systems and update the prior risk information in various inspection scenarios. However, this approach can handle only a constant-amplitude load and has limitations in considering a cyclic load with varying amplitude levels, which is the major loading pattern generated by train traffic. In addition, it is not feasible to update the prior risk information after bridges are repaired. In this research, the system reliability approach is further developed so that it can handle a varying-amplitude load and update the system-level risk of fatigue failure for railway bridges after inspection and repair. The proposed method is applied to a numerical example of an in-service railway bridge, and the effects of inspection and repair on the probabilistic fatigue life are discussed. PMID:28441768

Damage Detection in Railway Prestressed Concrete Sleepers using Acoustic Emission

NASA Astrophysics Data System (ADS)

Clark, A.; Kaewunruen, S.; Janeliukstis, R.; Papaelias, M.

2017-10-01

Prestressed concrete sleepers (or railroad ties) are safety-critical elements in railway tracks that distribute the wheel loads from the rails to the track support system. Over a period of time, the concrete sleepers age and deteriorate in addition to experiencing various types of static and dynamic loading conditions, which are attributable to train operations. In many cases, structural cracks can develop within the sleepers due to high intensity impact loads or due to poor track maintenance. Often, cracks of sleepers develop and present at the midspan due to excessive negative bending. These cracks can cause broken sleepers and sometimes called ‘center bound’ problem in railway lines. This paper is the world first to present an application of non-destructive acoustic emission technology for damage detection in railway concrete sleepers. It presents experimental investigations in order to detect center-bound cracks in railway prestressed concrete sleepers. Experimental laboratory testing involves three-point bending tests of four concrete sleepers. Three-point bending tests correspond to a real failure mode, when the loads are not transferred uniformly to the ballast support. It is observed that AE sensing provides an accurate means for detecting the location and magnitude of cracks in sleepers. Sensor location criticality is also highlighted in the paper to demonstrate the reliability-based damage detection of the sleepers.

Practical aspects of designing and conducting pharmacoeconomic studies in Japan.

PubMed

Doherty, Jim; Sato, Keiko

2003-01-01

The advent of simultaneous global clinical trials and drug registration strategies has increased the demand for global pharmacoeconomic strategies. Outcomes researchers in pharmaceutical companies are faced with the challenge of assessing at a strategic level what pharmacoeconomic data are most useful in Japan and when, and then deciding at a tactical level what type of study designs are feasible. This paper is written mainly for the benefit of researchers working outside of Japan in the pharmaceutical/medical device industry or academia who are interested in conducting research in Japan. We reviewed the existing pharmacoeconomic literature in Japan, and found that the number of studies per year has been steadily increasing. The majority of studies have been cost-effectiveness and cost-consequence analyses. Typical data sources available in Japan are somewhat limited compared with other Western countries. However, charge data can be easily accessed through the national uniform reimbursement fee system and these data are particularly relevant for pharmaceutical pricing negotiations with the Ministry of Health, Labor and Welfare (MHLW). The present use of pharmacoeconomic data by pharmaceutical companies is mainly for pricing negotiations but recent reforms make certain types of data useful for marketing strategies too. The demand for pharmacoeconomic data may increase because of upcoming MHLW pharmaceutical pricing and/or recent health insurance system reforms. Economic evaluation of medical technologies in Japan, though lagging behind North America, Australia and Europe, has the potential to rapidly gather momentum as increasing cost-escalation worries contribute to a growing interest in pharmacoeconomic data.

76 FR 73776 - Wiregrass Central Railway, LLC-Abandonment Exemption-in Coffee County, AL

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-29

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. AB 1077X] Wiregrass Central Railway, LLC--Abandonment Exemption--in Coffee County, AL On November 9, 2011, Wiregrass Central Railway... railroad extending between milepost 820.0 and milepost 821.2 in Enterprise, in Coffee County, Ala. (the...

Assessment of railway wagon suspension characteristics

NASA Astrophysics Data System (ADS)

Soukup, Josef; Skočilas, Jan; Skočilasová, Blanka

2017-05-01

The article deals with assessment of railway wagon suspension characteristics. The essential characteristics of a suspension are represented by the stiffness constants of the equivalent springs and the eigen frequencies of the oscillating movements in reference to the main central inertia axes of a vehicle. The premise of the experimental determination of these characteristic is the knowledge of the gravity center position and the knowledge of the main central inertia moments of the vehicle frame. The vehicle frame performs the general spatial movement when the vehicle moves. An analysis of the frame movement generally arises from Euler's equations which are commonly used for the description of the spherical movement. This solution is difficult and it can be simplified by applying the specific assumptions. The eigen frequencies solutions and solutions of the suspension stiffness are presented in the article. The solutions are applied on the railway and road vehicles with the simplifying conditions. A new method which assessed the characteristics is described in the article.

The noise factor in railway locomotives.

PubMed

Rotter, T

1982-09-01

This article concerns the problem of acoustic work conditions on railway locomotives. The objective results of sonometric surveys in locomotive cabins are compared with subject data received from locomotive crews obtained by means of a specific questionnaire 'The Subjective Estimation of Noise'. The analysis touched 9 type of locomotives; steam, diesel and electric engines. We asked drivers of different age groups and with varying lengths of professional service for their opinions The aim of the investigation was to determine the following points: 1. to analyse the drivers' subjective estimation of the noise in the locomotive cabins; 2. to define length of time for which the driver remains under the influence of the noise after finishing work; 3. to investigate the question of perception and understanding of sounds and vocal signals used in the locomotive. These problems are a small part of the general plan to improve work conditions on the Polish National Railways.

Predicting surface vibration from underground railways through inhomogeneous soil

NASA Astrophysics Data System (ADS)

Jones, Simon; Hunt, Hugh

2012-04-01

Noise and vibration from underground railways is a major source of disturbance to inhabitants near subways. To help designers meet noise and vibration limits, numerical models are used to understand vibration propagation from these underground railways. However, the models commonly assume the ground is homogeneous and neglect to include local variability in the soil properties. Such simplifying assumptions add a level of uncertainty to the predictions which is not well understood. The goal of the current paper is to quantify the effect of soil inhomogeneity on surface vibration. The thin-layer method (TLM) is suggested as an efficient and accurate means of simulating vibration from underground railways in arbitrarily layered half-spaces. Stochastic variability of the soil's elastic modulus is introduced using a K-L expansion; the modulus is assumed to have a log-normal distribution and a modified exponential covariance kernel. The effect of horizontal soil variability is investigated by comparing the stochastic results for soils varied only in the vertical direction to soils with 2D variability. Results suggest that local soil inhomogeneity can significantly affect surface velocity predictions; 90 percent confidence intervals showing 8 dB averages and peak values up to 12 dB are computed. This is a significant source of uncertainty and should be considered when using predictions from models assuming homogeneous soil properties. Furthermore, the effect of horizontal variability of the elastic modulus on the confidence interval appears to be negligible. This suggests that only vertical variation needs to be taken into account when modelling ground vibration from underground railways.

Compaction of Railway Ballast During Tamping Process: a Parametric Study

NASA Astrophysics Data System (ADS)

Saussine, G.; Azéma, E.; Perales, R.; Radjaï, F.

2009-06-01

We characterize an industrial process currently used on railway track: tamping operation. This process is employed in order to restore the geometry of railway track distorted by train traffics. The main goal is to compact the granular material under the sleepers supporting the railroad squeezing and vibrations. We focus on different phases of the tamping process, namely the penetration of tamping tines into the ballast and squeezing of ballast between tines. Our numerical simulations of three-dimensional discrete polyhedral grains allow us to investigate the influence of vibration frequency on the compaction level at the end of the process, the role of velocity of tamping tines during penetration phase and the mechanism of compaction of a confined granular layer under horizontal vibrations. For each tamping phase, an optimal frequency is proposed, and an analysis of the full process on the samples representing a portion of the railway track enables us to access the influence of various parameters required to optimize the process.

Work-family conflict and safety participation of high-speed railway drivers: Job satisfaction as a mediator.

PubMed

Wei, Wei; Guo, Ming; Ye, Long; Liao, Ganli; Yang, Zhehan

2016-10-01

Despite the large body of work on the work-family interface, hardly any literature has addressed the work-family interface in safety-critical settings. This study draws from social exchange theory to examine the effect of employees' strain-based work-to-family conflict on their supervisors' rating of their safety participation through job satisfaction. The sample consisted of 494 drivers from a major railway company in China. The results of a structural equation model revealed that drivers' strain-based work-to-family conflict negatively influences safety participation, and the relationship was partially mediated by job satisfaction. These findings highlight the importance of reducing employees' work-to-family conflict in safety-critical organizations. Copyright © 2016 Elsevier Ltd. All rights reserved.

All Aboard the Information Super...Railway!

ERIC Educational Resources Information Center

Klassen, Frank, Jr.

1994-01-01

New information technology is viewed as analogous to a railway network that serves many, in diverse areas, and leads users to new frontiers. It is suggested that higher education can contribute to this system by developing useful new applications, providing guidelines for appropriate "passenger" behavior, and enhancing quality. (MSE)

The effects of railway noise on sleep medication intake: results from the ALPNAP-study.

PubMed

Lercher, P; Brink, M; Rudisser, J; Van Renterghem, T; Botteldooren, D; Baulac, M; Defrance, J

2010-01-01

In the 1980s/90s, a number of socio-acoustic surveys and laboratory studies on railway noise effects have observed less reported disturbance/interference with sleep at the same exposure level compared with other modes of transportation. This lower grade of disturbance has received the label "railway bonus", was implemented in noise legislation in a number of European countries and was applied in planning and environmental impact assessments. However, majority of the studies investigating physiological outcomes did not find the bespoke difference. In a telephone survey (N=1643) we investigated the relationship between railway noise and sleep medication intake and the impact of railway noise events on motility parameters during night was assessed with contact-free high resolution actimetry devices. Multiple logistic regression analysis with cubic splines was applied to assess the probability of sleep medication use based on railway sound level and nine covariates. The non-linear exposure-response curve showed a statistically significant leveling off around 60 dB (A), Lden. Age, health status and trauma history were the most important covariates. The results were supported also by a similar analysis based on the indicator "night time noise annoyance". No railway bonus could be observed above 55 dB(A), Lden. In the actimetry study, the slope of rise of train noise events proved to be almost as important a predictor for motility reactions as was the maximum sound pressure level - an observation which confirms similar findings from laboratory experiments and field studies on aircraft noise and sleep disturbance. Legislation using a railway bonus will underestimate the noise impact by about 10 dB (A), Lden under the conditions comparable with those in the survey study. The choice of the noise calculation method may influence the threshold for guideline setting.

Methodology for quantification of waste generated in Spanish railway construction works

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guzman Baez, Ana de; Villoria Saez, Paola; Rio Merino, Mercedes del

Highlights: Black-Right-Pointing-Pointer Two equations for C and D waste estimation in railway construction works are developed. Black-Right-Pointing-Pointer Mixed C and D waste is the most generated category during railway construction works. Black-Right-Pointing-Pointer Tunnel construction is essential to quantify the waste generated during the works. Black-Right-Pointing-Pointer There is a relationship between C and D waste generated and railway functional units. Black-Right-Pointing-Pointer The methodology proposed can be used to obtain new constants for other areas. - Abstract: In the last years, the European Union (EU) has been focused on the reduction of construction and demolition (C and D) waste. Specifically, in 2006,more » Spain generated roughly 47 million tons of C and D waste, of which only 13.6% was recycled. This situation has lead to the drawing up of many regulations on C and D waste during the past years forcing EU countries to include new measures for waste prevention and recycling. Among these measures, the mandatory obligation to quantify the C and D waste expected to be originated during a construction project is mandated. However, limited data is available on civil engineering projects. Therefore, the aim of this research study is to improve C and D waste management in railway projects, by developing a model for C and D waste quantification. For this purpose, we develop two equations which estimate in advance the amount, both in weight and volume, of the C and D waste likely to be generated in railway construction projects, including the category of C and D waste generated for the entire project.« less

Seismic assessment of a multi-span steel railway bridge in Turkey based on nonlinear time history

NASA Astrophysics Data System (ADS)

Yılmaz, Mehmet F.; Çağlayan, Barlas Ö.

2018-01-01

Many research studies have shown that bridges are vulnerable to earthquakes, graphically confirmed by incidents such as the San Fernando (1971 USA), Northridge (1994 USA), Great Hanshin (1995 Japan), and Chi-Chi (1999 Taiwan) earthquakes, amongst many others. The studies show that fragility curves are useful tools for bridge seismic risk assessments, which can be generated empirically or analytically. Empirical fragility curves can be generated where damage reports from past earthquakes are available, but otherwise, analytical fragility curves can be generated from structural seismic response analysis. Earthquake damage data in Turkey are very limited, hence this study employed an analytical method to generate fragility curves for the Alasehir bridge. The Alasehir bridge is part of the Manisa-Uşak-Dumlupınar-Afyon railway line, which is very important for human and freight transportation, and since most of the country is seismically active, it is essential to assess the bridge's vulnerability. The bridge consists of six 30 m truss spans with a total span 189 m supported by 2 abutments and 5 truss piers, 12.5, 19, 26, 33, and 40 m. Sap2000 software was used to model the Alasehir bridge, which was refined using field measurements, and the effect of 60 selected real earthquake data analyzed using the refined model, considering material and geometry nonlinearity. Thus, the seismic behavior of Alasehir railway bridge was determined and truss pier reaction and displacements were used to determine its seismic performance. Different intensity measures were compared for efficiency, practicality, and sufficiency and their component and system fragility curves derived.

Modeling Guidelines for Code Generation in the Railway Signaling Context

NASA Technical Reports Server (NTRS)

Ferrari, Alessio; Bacherini, Stefano; Fantechi, Alessandro; Zingoni, Niccolo

2009-01-01

Modeling guidelines constitute one of the fundamental cornerstones for Model Based Development. Their relevance is essential when dealing with code generation in the safety-critical domain. This article presents the experience of a railway signaling systems manufacturer on this issue. Introduction of Model-Based Development (MBD) and code generation in the industrial safety-critical sector created a crucial paradigm shift in the development process of dependable systems. While traditional software development focuses on the code, with MBD practices the focus shifts to model abstractions. The change has fundamental implications for safety-critical systems, which still need to guarantee a high degree of confidence also at code level. Usage of the Simulink/Stateflow platform for modeling, which is a de facto standard in control software development, does not ensure by itself production of high-quality dependable code. This issue has been addressed by companies through the definition of modeling rules imposing restrictions on the usage of design tools components, in order to enable production of qualified code. The MAAB Control Algorithm Modeling Guidelines (MathWorks Automotive Advisory Board)[3] is a well established set of publicly available rules for modeling with Simulink/Stateflow. This set of recommendations has been developed by a group of OEMs and suppliers of the automotive sector with the objective of enforcing and easing the usage of the MathWorks tools within the automotive industry. The guidelines have been published in 2001 and afterwords revisited in 2007 in order to integrate some additional rules developed by the Japanese division of MAAB [5]. The scope of the current edition of the guidelines ranges from model maintainability and readability to code generation issues. The rules are conceived as a reference baseline and therefore they need to be tailored to comply with the characteristics of each industrial context. Customization of these

Fault Detection and Diagnosis of Railway Point Machines by Sound Analysis

PubMed Central

Lee, Jonguk; Choi, Heesu; Park, Daihee; Chung, Yongwha; Kim, Hee-Young; Yoon, Sukhan

2016-01-01

Railway point devices act as actuators that provide different routes to trains by driving switchblades from the current position to the opposite one. Point failure can significantly affect railway operations, with potentially disastrous consequences. Therefore, early detection of anomalies is critical for monitoring and managing the condition of rail infrastructure. We present a data mining solution that utilizes audio data to efficiently detect and diagnose faults in railway condition monitoring systems. The system enables extracting mel-frequency cepstrum coefficients (MFCCs) from audio data with reduced feature dimensions using attribute subset selection, and employs support vector machines (SVMs) for early detection and classification of anomalies. Experimental results show that the system enables cost-effective detection and diagnosis of faults using a cheap microphone, with accuracy exceeding 94.1% whether used alone or in combination with other known methods. PMID:27092509

Railway deformation detected by DInSAR over active sinkholes in the Ebro Valley evaporite karst, Spain

NASA Astrophysics Data System (ADS)

Galve, J. P.; Castañeda, C.; Gutiérrez, F.

2015-11-01

Subsidence was measured for the first time on railway tracks in the central sector of Ebro Valley (NE Spain) using Differential Synthetic Aperture Radar Interferometry (DInSAR) techniques. This area is affected by evaporite karst and the analysed railway corridors traverse active sinkholes that produce deformations in these infrastructures. One of the railway tracks affected by slight settlements is the Madrid-Barcelona high-speed line, a form of transport infrastructure highly vulnerable to ground deformation processes. Our analysis based on DInSAR measurements and geomorphological surveys indicates that this line shows dissolution-induced subsidence and compaction of anthropogenic deposits (infills and embankments). Significant sinkhole-related subsidence was also measured by DInSAR techniques on the Castejón-Zaragoza conventional railway line. This study demonstrates that DInSAR velocity maps, coupled with detailed geomorphological surveys, may help in the identification of the railway track sections that are affected by active subsidence.

An automatic method for detecting sliding railway wheels and hot bearings using thermal imagery.

DOT National Transportation Integrated Search

2016-05-03

One of the most important safety-related tasks in the rail industry is early detection of defective rolling : stock components. Railway wheels and wheel bearings are two components prone to damage due to : their interactions with brakes and railway t...

Research on high-speed railway's vibration analysis checking based on intelligent mobile terminal

NASA Astrophysics Data System (ADS)

Li, Peigang; Xie, Shulin; Zhao, Xuefeng

2017-04-01

Recently, the development of high-speed railway meets the requirement of society booming and it has gradually become the first choice for long-length journey. Since ensuring the safety and stable operation are of great importance to high-speed trains owing to its unique features, vibration analysis checking is one of main means to be adopted. Due to the popularization of Smartphone, in this research, a novel public-participating method to achieve high-speed railway's vibration analysis checking based on smartphone and an inspection application of high-speed railway line built in the intelligent mobile terminal were proposed. Utilizing the accelerometer, gyroscope, GPS and other high-performance sensors which were integrated in smartphone, the application can obtain multiple parameters like acceleration, angle, etc and pinpoint the location. Therefore, through analyzing the acceleration data in time domain and frequency domain using fast Fourier transform, the research compared much of data from monitoring tests under different measure conditions and measuring points. Furthermore, an idea of establishing a system about analysis checking was outlined in paper. It has been validated that the smartphone-based high-speed railway line inspection system is reliable and feasible on the high-speed railway lines. And it has more advantages, such as convenience, low cost and being widely used. Obviously, the research has important practical significance and broad application prospects.

Railway deformation detected by DInSAR over active sinkholes in the Ebro Valley evaporite karst, Spain

NASA Astrophysics Data System (ADS)

Galve, J. P.; Castañeda, C.; Gutiérrez, F.

2015-06-01

Previously not measured subsidence on railway tracks was detected using DInSAR displacement maps produced for the central sector of Ebro Valley (NE Spain). This area is affected by evaporite karst and the analyzed railway corridors traverse active sinkholes that produce deformations in these infrastructures. One of the railway tracks affected by slight settlements corresponds to the Madrid-Barcelona high-speed line, a transport infrastructure highly vulnerable to ground deformation processes. Our analysis based on DInSAR measurements and geomorphological surveys indicate that this line show dissolution-induced subsidence and compaction of anthropogenic deposits (infills and embankments). By using DInSAR techniques, it was also measured the significant subsidence related to the activity of sinkholes in the Castejón-Zaragoza conventional railway line. Thus, this study demonstrate that DInSAR velocity maps coupled with detailed geomorphological surveys may help in the identification of the sectors of railway tracks that may compromise the safety of travellers.

[Mental health status in railway female workers and its occupational influencing factors].

PubMed

Ji, F L; Liu, Z M; Liu, Z S; Zou, J F; Yu, W L; Li, H M; Li, J; Kong, L M; Jiang, Q

2018-02-20

Objective: To investigate the mental health status of railway female workers and related influencing factors, and to provide a scientific strategy for labor protection regulations in railway female workers. Methods: Cluster sampling was used to select 5033 female workers from Jinan, Nanning, Qinghai-Tibet, and Wuhan railway systems in China from January to August, 2016. A uniform reproductive health questionnaire, as well as the Symptom Checklist-90 (SCL-90) , was used to investigate their general information (age, marital status, education level, and family income) , work type (day shift, night shift, or work on shift) , work position, and the presence or absence of exposure to occupational hazardous factors. The score on each factor of SCL-90 and the positive rate of mental health status were calculated. Results: The positive rate of mental health status was 10.6% in railway female workers. The workers exposed to occupational hazardous factors had a significantly higher positive rate of mental health status than those not exposed to occupational hazardous factors (14.20% vs 8.02%, P <0.01) . There were significant differences in the positive rate of mental health status between workers with different ages, marital status, education levels, histories of abortion, or annual family income levels ( P <0.01) . The scores of somatization (1.54±0.62) and horror (1.28±0.47) in SCL-90 were significantly higher than the Chinese adult norm ( P <0.01) . The multivariate logistic regression analysis showed that exposure to occupational hazardous factors, night shift, overwork, and carrying heavy objects were associated with mental health problems ( OR =1.797, 95% CI : 1.393-2.318; OR =0.641, 95% CI : 0.498-0.827; OR =0.586, 95% CI : 0.439-0.783; OR =0.580, 95% CI : 0.378-0.890) . Conclusion: Railway female workers have lower levels of mental health than the general population and are under significant occupational stress. Exposure to occupational hazardous factors, night

A New Filtering and Smoothing Algorithm for Railway Track Surveying Based on Landmark and IMU/Odometer

PubMed Central

Jiang, Qingan; Wu, Wenqi; Jiang, Mingming; Li, Yun

2017-01-01

High-accuracy railway track surveying is essential for railway construction and maintenance. The traditional approaches based on total station equipment are not efficient enough since high precision surveying frequently needs static measurements. This paper proposes a new filtering and smoothing algorithm based on the IMU/odometer and landmarks integration for the railway track surveying. In order to overcome the difficulty of estimating too many error parameters with too few landmark observations, a new model with completely observable error states is established by combining error terms of the system. Based on covariance analysis, the analytical relationship between the railway track surveying accuracy requirements and equivalent gyro drifts including bias instability and random walk noise are established. Experiment results show that the accuracy of the new filtering and smoothing algorithm for railway track surveying can reach 1 mm (1σ) when using a Ring Laser Gyroscope (RLG)-based Inertial Measurement Unit (IMU) with gyro bias instability of 0.03°/h and random walk noise of 0.005°/h while control points of the track control network (CPIII) position observations are provided by the optical total station in about every 60 m interval. The proposed approach can satisfy at the same time the demands of high accuracy and work efficiency for railway track surveying. PMID:28629191

Free vibration analysis of composite railway wheels

NASA Astrophysics Data System (ADS)

Ganesan, N.; Ramesh, T. C.

1992-02-01

Composite materials have been finding increasing applications in the field of transportation. A U.S.A. patent suggesting the use of composite materials for railway wheels is the basis for this paper. In thispaper, the natural vibrations of railway wheels made of composite materials have been theoretically estimated by the finite element method and compared with those in wheels made of steel. A thick conical shell element with displacements in the axial, radial and circumferential directions has been used in the analysis. This element brings out the coupling between the different modes of vibration, and this aspect is important in the dynamic analysis of composite wheels. Three geometries of wheels and two materials (Kevlar-epoxy and graphite-epoxy) have been used in the study. For each of these materials, two fiber orientations (radial and circumferential) have been taken up and their natural frequencies determined.

Bottom to Top Approach for Railway KPI Generation

NASA Astrophysics Data System (ADS)

Villarejo, Roberto; Johansson, Carl-Anders; Leturiondo, Urko; Simon, Victor; Seneviratne, Dammika; Galar, Diego

2017-09-01

Railway maintenance especially on infrastructure produces a vast amount of data. However, having data is not synonymous with having information; rather, data must be processed to extract information. In railway maintenance, the development of key performance indicators (KPIs) linked to punctuality or capacity can help planned and scheduled maintenance, thus aligning the maintenance department with corporate objectives. There is a need for an improved method to analyse railway data to find the relevant KPIs. The system should support maintainers, answering such questions as what maintenance should be done, where and when. The system should equip the user with the knowledge of the infrastructure's condition and configuration, and the traffic situation so maintenance resources can be targeted to only those areas needing work. The amount of information is vast, so it must be hierarchized and aggregated; users must filter out the useless indicators. Data are fused by compiling several individual indicators into a single index; the resulting composite indicators measure multidimensional concepts which cannot be captured by a single index. The paper describes a method of monitoring a complex entity. In this scenario, a plurality of use indices and weighting values are used to create a composite and aggregated use index from a combination of lower level use indices and weighting values. The resulting composite and aggregated indicators can be a decision-making tool for asset managers at different hierarchical levels.

The Dynamic Tensile Behavior of Railway Wheel Steel at High Strain Rates

NASA Astrophysics Data System (ADS)

Jing, Lin; Han, Liangliang; Zhao, Longmao; Zhang, Ying

2016-11-01

The dynamic tensile tests on D1 railway wheel steel at high strain rates were conducted using a split Hopkinson tensile bar (SHTB) apparatus, compared to quasi-static tests. Three different types of specimens, which were machined from three different positions (i.e., the rim, web and hub) of a railway wheel, were prepared and examined. The rim specimens were checked to have a higher yield stress and ultimate tensile strength than those web and hub specimens under both quasi-static and dynamic loadings, and the railway wheel steel was demonstrated to be strain rate dependent in dynamic tension. The dynamic tensile fracture surfaces of all the wheel steel specimens are cup-cone-shaped morphology on a macroscopic scale and with the quasi-ductile fracture features on the microscopic scale.

Implementation of a piezoelectric energy harvester in railway health monitoring

NASA Astrophysics Data System (ADS)

Li, Jingcheng; Jang, Shinae; Tang, Jiong

2014-03-01

With development of wireless sensor technology, wireless sensor network has shown a great potential for railway health monitoring. However, how to supply continuous power to the wireless sensor nodes is one of the critical issues in long-term full-scale deployment of the wireless smart sensors. Some energy harvesting methodologies have been available including solar, vibration, wind, etc; among them, vibration-based energy harvester using piezoelectric material showed the potential for converting ambient vibration energy to electric energy in railway health monitoring even for underground subway systems. However, the piezoelectric energy harvester has two major problems including that it could only generate small amount of energy, and that it should match the exact narrow band natural frequency with the excitation frequency. To overcome these problems, a wide band piezoelectric energy harvester, which could generate more power on various frequencies regions, has been designed and validated with experimental test. Then it was applied to a full-scale field test using actual railway train. The power generation of the wide band piezoelectric array has been compared to a narrow-band, resonant-based, piezoelectric energy harvester.

The lightest market in the world: light and mild cigarettes in Japan.

PubMed

Assunta, Mary; Chapman, Simon

2008-05-01

This article reviews the history of the introduction and use of light and mild labeled cigarettes in Japan, the "lightest" market in the world. Systematic keyword and opportunistic Web site searches were conducted on tobacco industry internal documents relevant to Japan, supplemented with relevant material from the tobacco trade and sociological literatures. Certain "market quirks" of the Japanese society benefited the tobacco industry in promoting its light and mild cigarettes. Japan's is a trend-conscious society with a penchant for new fashion and products. The Japanese are innovative, with the propensity to transform concepts into something characteristically their own marked by a distinct cultural style, such as the concept of keihaku tansho ("light-thin-short-small"). With big-budget sophisticated advertising, tobacco companies developed a lucrative market for mild, light, and ultra-low-tar cigarettes. Smokers had a preference for charcoal filters, which they believed protected them. Tar numbers meant little to smokers. The transnational tobacco companies capitalized on consumer concerns about the health hazards of smoking to promote low-tar cigarettes as a safer alternative. This may be one factor that explains why smoking prevalence in Japan remains high. Light and mild cigarettes are popular in Japan because Japanese smokers believe low tar/nicotine cigarette with charcoal filters protect them and help mollify their health concerns about smoking.

Behaviour patterns preceding a railway suicide: Explorative study of German Federal Police officers' experiences

PubMed Central

2011-01-01

Background Constant high-level numbers of railway suicides indicate that prevention strategies against railway suicides are urgently needed. The main question of the present study was whether pre-crash railway suicide behaviour can be identified, using German Federal Police officers experience with suicidal events in railway related environments. Methods To collect information on pre-crash railway suicide behaviour, a questionnaire was used and made available on the German Federal Police intranet. A total of 202 subjects (mean age: 41 years, sex: 84.9% male) were included in the analysis. Multivariate logistic regression analyses were performed to predict the prevention of suicide (first model) or demand for counselling (second model) as outcomes. Sex, age, years of service, number of experienced suicides, suicides personally observed, information on suicides obtained from witnesses and finally either counselling/debriefing (first model) or whether officers had prevented a suicide (second model) were used as predictors. Results A considerable proportion of police officers reported behavioural patterns preceding a suicide. Half of them observed the dropping or leaving behind of personal belongings or the avoidance of eye contact, more than a third erratic gesture, mimic or movement. Erratic communication patterns and general confusion were each reported by about one quarter. One fifth indicated the influence of alcohol. Less frequently observed behaviour was aimlessly wandering (14.3%) and out of the ordinary clothing (4%). About one third of all railway suicide victims committed suicide in stations. Of those, 70% had chosen an eminent spot. The multivariate logistic regression model using prevented suicides as the outcome identified the number of suicides experienced, counselling/debriefing and having personally observed a suicide as variables with significant impact. The model using counselling/debriefing as the outcome identified age and having prevented a

Railway Tunnel Clearance Inspection Method Based on 3D Point Cloud from Mobile Laser Scanning

PubMed Central

Zhou, Yuhui; Wang, Shaohua; Mei, Xi; Yin, Wangling; Lin, Chunfeng; Mao, Qingzhou

2017-01-01

Railway tunnel clearance is directly related to the safe operation of trains and upgrading of freight capacity. As more and more railway are put into operation and the operation is continuously becoming faster, the railway tunnel clearance inspection should be more precise and efficient. In view of the problems existing in traditional tunnel clearance inspection methods, such as low density, slow speed and a lot of manual operations, this paper proposes a tunnel clearance inspection approach based on 3D point clouds obtained by a mobile laser scanning system (MLS). First, a dynamic coordinate system for railway tunnel clearance inspection has been proposed. A rail line extraction algorithm based on 3D linear fitting is implemented from the segmented point cloud to establish a dynamic clearance coordinate system. Second, a method to seamlessly connect all rail segments based on the railway clearance restrictions, and a seamless rail alignment is formed sequentially from the middle tunnel section to both ends. Finally, based on the rail alignment and the track clearance coordinate system, different types of clearance frames are introduced for intrusion operation with the tunnel section to realize the tunnel clearance inspection. By taking the Shuanghekou Tunnel of the Chengdu–Kunming Railway as an example, when the clearance inspection is carried out by the method mentioned herein, its precision can reach 0.03 m, and difference types of clearances can be effectively calculated. This method has a wide application prospects. PMID:28880232

Ultrasonic detection of plate cracks in railway wheels

DOT National Transportation Integrated Search

1976-07-31

The results of experimental efforts established the feasibility of the detection of railway wheel plate cracks by an ultrasonic pulse echo testing technique from the tread surface. Feasibility and test sensitivities were established using artificial ...

High-speed railway signal trackside equipment patrol inspection system

NASA Astrophysics Data System (ADS)

Wu, Nan

2018-03-01

High-speed railway signal trackside equipment patrol inspection system comprehensively applies TDI (time delay integration), high-speed and highly responsive CMOS architecture, low illumination photosensitive technique, image data compression technique, machine vision technique and so on, installed on high-speed railway inspection train, and achieves the collection, management and analysis of the images of signal trackside equipment appearance while the train is running. The system will automatically filter out the signal trackside equipment images from a large number of the background image, and identify of the equipment changes by comparing the original image data. Combining with ledger data and train location information, the system accurately locate the trackside equipment, conscientiously guiding maintenance.

The Development and Implementation of Noise Control Measures on AN Urban Railway

NASA Astrophysics Data System (ADS)

Fitzgerald, B. M.

1996-05-01

This paper describes the development and implementation of noise control measures by Docklands Light Railway (DLR), London, to meet obligations set out in its Noise and Vibration Policy, adherence to which is set by an Act of the U. K. Parliament. Noise levels from the operational railway exceeded targets given in the policy at two noise-sensitive urban residential sites. Following diagnosis by noise survey of the problems specific to each site and by noise reduction predictions, acoustic absorbent screens were installed which, it was subsequently demonstrated, succeeded in providing the required level of noise reduction. These schemes needed to accommodate the requirements of the railway for maintenance (leading to the barriers having to be fully demountable), safe trackside walking routes and easy passenger evacuation from trains. During construction, liaison was developed with the local authority for the control of environmental pollution (primarily noise) and hours of working (which had to suit railway possessions) and good relations were fostered with local residents through regular contact. Fulfilment of project objectives was demonstrated by a programme of post-installation noise measurements. The paper concludes with an evaluation of noise mitigation performance achieved together with a suggested alternative strategy for addressing the noise problem from a system-wide perspective.

Derailment-based Fault Tree Analysis on Risk Management of Railway Turnout Systems

NASA Astrophysics Data System (ADS)

Dindar, Serdar; Kaewunruen, Sakdirat; An, Min; Gigante-Barrera, Ángel

2017-10-01

Railway turnouts are fundamental mechanical infrastructures, which allow a rolling stock to divert one direction to another. As those are of a large number of engineering subsystems, e.g. track, signalling, earthworks, these particular sub-systems are expected to induce high potential through various kind of failure mechanisms. This could be a cause of any catastrophic event. A derailment, one of undesirable events in railway operation, often results, albeit rare occurs, in damaging to rolling stock, railway infrastructure and disrupt service, and has the potential to cause casualties and even loss of lives. As a result, it is quite significant that a well-designed risk analysis is performed to create awareness of hazards and to identify what parts of the systems may be at risk. This study will focus on all types of environment based failures as a result of numerous contributing factors noted officially as accident reports. This risk analysis is designed to help industry to minimise the occurrence of accidents at railway turnouts. The methodology of the study relies on accurate assessment of derailment likelihood, and is based on statistical multiple factors-integrated accident rate analysis. The study is prepared in the way of establishing product risks and faults, and showing the impact of potential process by Boolean algebra.

Railway/highway at-grade crossing management : an overview.

DOT National Transportation Integrated Search

2014-12-01

This report draws on data from around the United States to describe the features of a successful : railway/highway at-grade crossing management program; it emphasizes the highway/trackbed structures : and crossing surfaces. Developing a structurally ...

[Railway use of asbestos-containing rubble: environmental hygienic aspects].

PubMed

Kaptsov, V A; Kashanskiĭ, S V; Domnin, S G; Tikhova, T S; Trofimova, E V; Novoselova, T A; Bogdanov, G B

2003-01-01

The paper presents the results of a study of the gravimetric and counting concentrations of respirable asbestos fibers while working with sand-and-crushed stone mixtures, obtained from the concentration of chrysotile asbestos, at distances of 25, 50, and 100 m from the working place, as well as in a car saloon when the electric train passes along the area of these operations following an hour, a day, and a year after the completion of work, in warm and colds seasons of a year. It is concluded that the use of asbestos-containing sand-and-crushed stone mixtures on the railway leads to a higher anthropogenic asbestos load on the population living in the railway right-of-way, on railway workers and passengers. In this connection, it is necessary to evaluate risk factors of asbestos-induced diseases among the above contingents. The authors consider that due to the fact that asbestos-containing sand-and-crushed stone mixtures are well wetted with water, followed by the formation of a firm surface crust that prevents dust formation, as well as the short duration and rare frequency of operations relating their change, it is necessary to irrigate the repair areas with water or surfactant liquids after work termination.

The relative importance of noise and vibration from railways.

PubMed

Howarth, H V; Griffin, M J

1990-06-01

An experiment was conducted to determine the subjective equivalence of railway noise and railway-induced building vibration, and hence the relative importance of the two stimuli. Six magnitudes of whole-body, vertical (z-axis) vibration and six levels of noise were presented simultaneously to each of 30 subjects in all 36 possible paired combinations. The stimuli were reproductions of the noise and vibration recorded inside a house during the passage of a train. The subjects were asked to indicate, after each presentation, which of the two stimuli (noise and vibration) they would prefer to be reduced. A seven-point scale was employed to indicate the total annoyance produced by the two stimuli. A subjective equivalence contour was determined from the levels at which 50% of the subjects preferred the reduction of noise and 50% preferred the reduction of vibration. The contour may be described by the relation L(AE) = 29.3 log10 VDV + 89.2, where L(AE) is the sound exposure level and VDV is the vibration dose value. This relation may be used to determine whether a reduction of noise or a reduction of vibration would be more beneficial to residents near railways. The total annoyance due to simultaneous noise and vibration was shown to depend on the magnitude of both stimuli.

[Sociomedical aspects of reduction of risk in the development of occupational diseases and industrial trauma in railway transport].

PubMed

Pankova, V B; Ivanov, V K; Kutovoĭ, V S

2001-01-01

The paper outlines the main constituents of occupational risk in railway workers, which are based on the sanitary and biomedical criteria of injury safety. Sociomedical aspects of the incidence of railway occupational diseases and injuries are discussed. A list of major occupational factors and causes that determine a high occupational risk in railway workers is given.

Profile of child labor in Indian railways.

PubMed

Mondal, Rakesh; Sarkar, Sumantra; Bhattacharya, Somnath; Sabui, Tapas; Mandal, Kalyanbrata; Ghosh, Jayanta; Bag, Toshibananda; Kumar, Nitish; Nandi, Madhumita

2012-10-01

To determine the socio-medical profile of child workers in Indian railways. This was a prospective longitudinal survey over one year. The children up to the age of 14 y entering the reserved second class sleeper compartment of long distance trains in Indian railways were included. The data were collected regarding their profile by the investigators either by interviewing or observation as per situation in the moving train in a predesigned proforma. Data pertaining to the social, demographic and medical aspects were collected. A total of eighty one children were noted in 22500 kilometers of train journey. Sex distribution (8:1) was unequal with males outnumbering females. This study, first of its kind, attempted to delineate a distinctive socio-medical profile in a special group of children. It might, on the behalf of social pediatrics, increase the awareness and help the society to formulate a rehabilitation policy in collaboration with national and international organizations.

Salmonella outbreak among railway and airline passengers.

PubMed

Hatakka, M

1992-01-01

A widespread outbreak by Salmonella infantis, infecting a total of 226 people, occurred in Finland at the beginning of August 1986. Of those infected, 107 were railway passengers, 91 were airline passengers and 28 were employed in a food processing establishment. The outbreak among the railway passengers was caused by egg sandwiches, the airline passengers were infected by a meal served on board and the catering employees by the breakfast served in the establishment. The outbreak was caused by food prepared in the establishment's kitchen. The employees' breakfasts had probably been contaminated by an employee who was a symptom-free Salmonella infantis carrier, and a number of the employees subsequently became infected, leading to widespread contamination of the food prepared in the establishment. The spread of the outbreak was further influenced by a heatwave at the time and by shortcomings in the cold storage facilities. The kitchen's hygiene supervision and the quality control of its output were reorganized after the outbreak.

Effect of railway safety education on the safety knowledge and behaviour intention of schoolchildren.

PubMed

Silla, Anne; Kallberg, Veli-Pekka

2016-04-01

This study was designed to evaluate whether railway safety lessons are effective in increasing schoolchildren's safety knowledge and behaviour intention. The railway safety education in schools included a 45-min lesson on safe behaviour in a railway environment directed at 8-11 year old schoolchildren. The lessons were held in four schools located near railway lines in Finland. The effectiveness of this measure was evaluated based on a short survey directed at pupils before the lesson (base level) and around 2-3 months later (post-lesson) based on three variables which are considered as strong determinants of actual behaviour: behaviour intention, estimated dangerousness of the behaviour, and level of knowledge on the legality of the behaviour. The results show that the change in the share of correct answers was positive regarding all questions except for one question in which the difference was not significant. Based on this we can reasonably assume that railway safety education in schools can have a positive effect for all the measured variables, although the effect is not necessarily large. The results indicate that these positive changes can have a positive effect on the frequency of trespassing (i.e. fewer unsafe crossings in the future). We can further assume that reduction in the frequency of trespassing would reduce the frequency of trespassing accidents. Copyright © 2015 Elsevier Ltd. All rights reserved.

75 FR 12808 - Montreal, Maine & Atlantic Railway, Ltd.-Discontinuance of Service and Abandonment-In Aroostook...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-17

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [STB Docket No. AB-1043 (Sub-No. 1)] Montreal, Maine & Atlantic Railway, Ltd.--Discontinuance of Service and Abandonment--In Aroostook and Penobscot Counties, ME On February 25, 2010, Montreal, Maine & Atlantic Railway, Ltd. (MMA) filed with the...

Consequences of organizational commitment in abolished company sports team - a case study in Japan.

PubMed

Honda, Yuki; Hochi, Yasuyuki; Mizuno, Motoki

2012-01-01

The purpose of this study was to show that how the abolishment of company sports team influenced the organizational commitment in employees. In this study, Three-Component Model of Organizational Commitment (Meyer and Allen, 1997) was tested with 16 employees (10 males, 6 females) of T Company in NAGANO prefecture. The average age of the participants was 44, 50 years (SD=±0.85). And from 16 employees, 3 male employees were measured on organizational commitment with interview test. According to the analysis, the relation between organizational commitment in employees and the abolishment of company sports team was not positive significant correlation. Furthermore, results of interview test did not show the relation between organizational commitment in employees and the abolishment of company sports team. However, results of interview test showed the relation with organizational commitment of players in T Company sports team. Consequently, the goal to possess a sports team in T Company was not to boost organizational commitment in employees. In addition, it is necessary to reconsider the correlation among employees engaged in T Company in the future.

NASDA and the Space Industry in Japan

NASA Astrophysics Data System (ADS)

Takamatsu, Hideo

2002-01-01

With over 30 years of history in space activities, Japan is now recognized as one of space powers in the world. Compared to other countries though, the features of Japanese space development are unique in several aspects. At first, its efforts are directed solely toward peaceful purposes and strictly separated from military uses. Secondly, there are many space related governmental agencies and institutes which are under supervision of different ministries. Thirdly, although the government budget is moderate and sales revenue of space industries is not so large, many large companies in aerospace or electronics industries see the importance of this business and compete each other mainly in the domestic market. NASDA, founded in 1969, is the largest governmental space organization and has played an important role in realizing practical applications of space activities. It has rapidly caught up the technology gap behind leading countries and has achieved remarkable successes with its own launch vehicles and satellites. Space industries, under the guidance of NASDA, have learned much from the U.S. companies and improved their technology levels and enjoyed steady growth during the early stage of Japanese space development. But before they became competitive enough in the world space business, the trade conflict between Japan and the U.S. made the procurement of Japanese non-R&D satellites open to the foreign satellite companies. Furthermore, interruptions of space activities due to recent successive failures of launch vehicles as well as Japanese economic slump have made space industries face hard situations. Under these circumstances, M&A of launch vehicle companies as well as satellite makers took place for the first time in Japanese aero-space history. Also at the government level, reorganization of space agencies is now under process. It is expected as a natural consequence of the merge of the Ministry of Education and the Science an Technology Agency, three space

Psychometric properties of the 25-item Work Limitations Questionnaire in Japan: factor structure, validity, and reliability in information and communication technology company employees.

PubMed

Kono, Yuko; Matsushima, Eisuke; Uji, Masayo

2014-02-01

The 25-item Work Limitations Questionnaire (WLQ-25) measures presenteeism but has not been sufficiently validated in a Japanese population. A total of 451 employees from four information technology companies in Tokyo completed the WLQ-25 and questionnaires of other variables on two occasions, 2 weeks apart. The WLQ-25 yielded a two-factor structure: Cognitive Demand and Physical Demand. These subscales showed good internal consistency, and both were associated with adverse working conditions, greater perceived job strain, lower skill use, poorer workplace social support, and less satisfactory psychological adjustment. Intraclass correlation coefficients of the two WLQ-25 subscales between time 1 and time 2 were 0.78 and 0.55, respectively. This study suggests acceptable psychometric properties of the WLQ-25 in Japan.

Structural impact response for assessing railway vibration induced on buildings

NASA Astrophysics Data System (ADS)

Kouroussis, Georges; Mouzakis, Harris P.; Vogiatzis, Konstantinos E.

2018-03-01

Over the syears, the rapid growth in railway infrastructure has led to numerous environmental challenges. One such significant issue, particularly in urban areas, is ground-borne vibration. A common source of ground-borne vibration is caused by local defects (e.g. rail joints, switches, turnouts, etc.) that generate large amplitude excitations at isolated locations. Modelling these excitation sources is particularly challenging and requires the use of complex and extensive computational efforts. For some situations, the use of experiments and measured data offers a rapid way to estimate the effect of such defects and to evaluate the railway vibration levels using a scoping approach. In this paper, the problem of railway-induced ground vibrations is presented along with experimental studies to assess the ground vibration and ground borne noise levels, with a particular focus on the structural response of sensitive buildings. The behaviour of particular building foundations is evaluated through experimental data collected in Brussels Region, by presenting the expected frequency responses for various types of buildings, taking into account both the soil-structure interaction and the tramway track response. A second study is dedicated to the Athens metro, where transmissibility functions are used to analyse the effect of various Athenian building face to metro network trough comprehensive measurement campaigns. This allows the verification of appropriate vibration mitigation measures. These benchmark applications based on experimental results have been proved to be efficient to treat a complex problem encountered in practice in urban areas, where the urban rail network interacts with important local defects and where the rise of railway ground vibration problems has clearly been identified.

An Intrusion Detection System for the Protection of Railway Assets Using Fiber Bragg Grating Sensors

PubMed Central

Catalano, Angelo; Bruno, Francesco Antonio; Pisco, Marco; Cutolo, Antonello; Cusano, Andrea

2014-01-01

We demonstrate the ability of Fiber Bragg Gratings (FBGs) sensors to protect large areas from unauthorized activities in railway scenarios such as stations or tunnels. We report on the technological strategy adopted to protect a specific depot, representative of a common scenario for security applications in the railway environment. One of the concerns in the protection of a railway area centers on the presence of rail-tracks, which cannot be obstructed with physical barriers. We propose an integrated optical fiber system composed of FBG strain sensors that can detect human intrusion for protection of the perimeter combined with FBG accelerometer sensors for protection of rail-track access. Several trials were carried out in indoor and outdoor environments. The results demonstrate that FBG strain sensors bonded under a ribbed rubber mat enable the detection of intruder break-in via the pressure induced on the mat, whereas the FBG accelerometers installed under the rails enable the detection of intruders walking close to the railroad tracks via the acoustic surface waves generated by footsteps. Based on a single enabling technology, this integrated system represents a valuable intrusion detection system for railway security and could be integrated with other sensing functionalities in the railway field using fiber optic technology. PMID:25268920

Integral Sensor Fault Detection and Isolation for Railway Traction Drive.

PubMed

Garramiola, Fernando; Del Olmo, Jon; Poza, Javier; Madina, Patxi; Almandoz, Gaizka

2018-05-13

Due to the increasing importance of reliability and availability of electric traction drives in Railway applications, early detection of faults has become an important key for Railway traction drive manufacturers. Sensor faults are important sources of failures. Among the different fault diagnosis approaches, in this article an integral diagnosis strategy for sensors in traction drives is presented. Such strategy is composed of an observer-based approach for direct current (DC)-link voltage and catenary current sensors, a frequency analysis approach for motor current phase sensors and a hardware redundancy solution for speed sensors. None of them requires any hardware change requirement in the actual traction drive. All the fault detection and isolation approaches have been validated in a Hardware-in-the-loop platform comprising a Real Time Simulator and a commercial Traction Control Unit for a tram. In comparison to safety-critical systems in Aerospace applications, Railway applications do not need instantaneous detection, and the diagnosis is validated in a short time period for reliable decision. Combining the different approaches and existing hardware redundancy, an integral fault diagnosis solution is provided, to detect and isolate faults in all the sensors installed in the traction drive.

Integral Sensor Fault Detection and Isolation for Railway Traction Drive

PubMed Central

del Olmo, Jon; Poza, Javier; Madina, Patxi; Almandoz, Gaizka

2018-01-01

Due to the increasing importance of reliability and availability of electric traction drives in Railway applications, early detection of faults has become an important key for Railway traction drive manufacturers. Sensor faults are important sources of failures. Among the different fault diagnosis approaches, in this article an integral diagnosis strategy for sensors in traction drives is presented. Such strategy is composed of an observer-based approach for direct current (DC)-link voltage and catenary current sensors, a frequency analysis approach for motor current phase sensors and a hardware redundancy solution for speed sensors. None of them requires any hardware change requirement in the actual traction drive. All the fault detection and isolation approaches have been validated in a Hardware-in-the-loop platform comprising a Real Time Simulator and a commercial Traction Control Unit for a tram. In comparison to safety-critical systems in Aerospace applications, Railway applications do not need instantaneous detection, and the diagnosis is validated in a short time period for reliable decision. Combining the different approaches and existing hardware redundancy, an integral fault diagnosis solution is provided, to detect and isolate faults in all the sensors installed in the traction drive. PMID:29757251

Controlled Blasting for Deconstruction of a Railway Bridge Near Sahibganj

NASA Astrophysics Data System (ADS)

Mandal, S. K.; Ghosh, A. K.; Oraon, S.

2018-06-01

Some of the Indian Railway bridges require reconstruction for electrification and expansion of railway tracks. Dismantling of bridge within time schedule in densely populated area requires controlled and pre-planned blasting methodology for safe pulling down of the structure and quick removal of blasted debris for fast restoration of tracks and smooth plying of trains. The three arched railway bridge (Bridge No. 61) located between Sahibganj and Karamtola cases one such example where the bridge was dismantled and the track was restored within 4 h of blasting, though the stipulated block period for demolition and restoration of tracks was 6 h. The 25.48 m long three-arched bridge was drilled and blasted with 225 number of blastholes (32 mm diameter) and 100 kg explosive (25 mm diameter). Length of blastholes varied between 0.5 and 1.8 m with blast geometry of 0.3-0.35 m burden and 0.33 m spacing. This paper deals with the conceptual and theoretical model developed for identification of the key locations for drilling and implementation of the same. It also discusses about the precautionary measures and the drilling pattern adopted for quick demolition and speedy restoration of tracks.

Controlled Blasting for Deconstruction of a Railway Bridge Near Sahibganj

NASA Astrophysics Data System (ADS)

Mandal, S. K.; Ghosh, A. K.; Oraon, S.

2018-02-01

Some of the Indian Railway bridges require reconstruction for electrification and expansion of railway tracks. Dismantling of bridge within time schedule in densely populated area requires controlled and pre-planned blasting methodology for safe pulling down of the structure and quick removal of blasted debris for fast restoration of tracks and smooth plying of trains. The three arched railway bridge (Bridge No. 61) located between Sahibganj and Karamtola cases one such example where the bridge was dismantled and the track was restored within 4 h of blasting, though the stipulated block period for demolition and restoration of tracks was 6 h. The 25.48 m long three-arched bridge was drilled and blasted with 225 number of blastholes (32 mm diameter) and 100 kg explosive (25 mm diameter). Length of blastholes varied between 0.5 and 1.8 m with blast geometry of 0.3-0.35 m burden and 0.33 m spacing. This paper deals with the conceptual and theoretical model developed for identification of the key locations for drilling and implementation of the same. It also discusses about the precautionary measures and the drilling pattern adopted for quick demolition and speedy restoration of tracks.

76 FR 5648 - Montreal, Maine & Atlantic Railway, Ltd.-Modified Rail Certificate-in Aroostook and Penobscot...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-01

... Penobscot Counties, Me.; Montreal, Maine & Atlantic Railway, Ltd.--Discontinuance of Service and Abandonment--in Aroostook and Penobscot Counties, ME. Montreal, Maine & Atlantic Railway, Ltd. (MMA) has requested..., approximately 233 miles of rail line in Aroostook and Penobscot Counties, Me. This line was the subject of the...

Prevention of railway trespassing by automatic sound warning-A pilot study.

PubMed

Kallberg, Veli-Pekka; Silla, Anne

2017-04-03

The objective of this study was to investigate the effects of a sound warning system on the frequency of trespassing at 2 pilot test sites in Finland. The effect of automatic prerecorded sound warning on the prevention of railway trespassing was evaluated based on observations at 2 test sites in Finland. At both sites an illegal footpath crossed the railway, and the average daily number of trespassers before implementation of the measures was about 18 at both sites. The results showed that trespassing was reduced at these sites by 18 and 44%, respectively. Because of the lack of proper control sites, it is possible that the real effects of the measure are somewhat smaller. The current study concludes that automatic sound warning may be efficient and cost effective at locations where fencing is not a viable option. However, it is not likely to be a cost-effective panacea for all kinds of sites where trespassing occurs, especially in countries like Finland where trespassing is scattered along the railway network rather than concentrated to a limited number of sites.

Sound radiation from railway sleepers

NASA Astrophysics Data System (ADS)

Zhang, Xianying; Thompson, David J.; Squicciarini, Giacomo

2016-05-01

The sleepers supporting the rails of a railway track are an important source of noise at low frequencies. The sound radiation from the sleepers has been calculated using a three-dimensional boundary element model including the effect of both reflective and partially absorptive ground. When the sleeper flexibility and support stiffness are taken into account, it is found that the radiation ratio of the sleeper can be approximated by that of a rigid half-sleeper. When multiple sleepers are excited through the rail, their sound radiation is increased. This effect has been calculated for cases where the sleeper is embedded in a rigid or partially absorptive ground. It is shown that it is sufficient to consider only three sleepers in determining their radiation ratio when installed in track. At low frequencies the vibration of the track is localised to the three sleepers nearest the excitation point whereas at higher frequencies the distance between the sleepers is large enough for them to be treated independently. Consequently the sound radiation increases by up to 5 dB below 100 Hz compared with the result for a single sleeper whereas above 300 Hz the result can be approximated by that for a single sleeper. Measurements on a 1/5 scale model railway track are used to verify the numerical predictions with good agreement being found for all configurations.

Learning from Philip Morris: Japan Tobacco's strategies regarding evidence of tobacco health harms as revealed in internal documents from the American tobacco industry.

PubMed

Iida, Kaori; Proctor, Robert N

2004-05-29

Japan is in the midst of a rapid increase in tobacco-related disease mortality, following the rapid growth of smoking after WWII. Stomach cancer was the country's leading cause of cancer death for most of the 20th century, until lung cancer took over this position in 1993. Cigarettes are the major cause of lung cancer in Japan, but the country's leading manufacturer, Japan Tobacco, two thirds of which is owned by the Japanese government, continues to question whether tobacco is a major cause of disease and death. Japanese courts do not have the power to subpoena a company's internal records, which has made it difficult to document Japan Tobacco's strategies concerning tobacco and health. Our interpretation of online archives of internal documents from American tobacco companies, however, is that Japan Tobacco has long known about the potential health risks involved in smoking and has sought to obstruct effective tobacco control. Beginning in the mid-1980s, these efforts were often co-ordinated with American tobacco manufacturers. The documentary evidence shows that cigarette manufacturer Philip Morris in particular assisted with and sometimes also supervised Japan Tobacco's actions and statements on smoking and health. In one instance, data gathered for an article published by the Japan Public Monopoly Corporation (Japan Tobacco's predecessor) were deliberately altered to lower the reported value of a hazard indicator (nicotine concentration in the air). International collaboration has made it easier for companies such as Japan Tobacco to develop effective anti-antismoking strategies. Evidence of such global industry collaborations might grow as lawsuits begin to be filed in other nations.

Rail embankment stabilization needs on the Hudson Bay Railway.

DOT National Transportation Integrated Search

2017-03-24

Since its construction in 1929, the Hudson Bay Railway (HBR) located in northern Manitoba, Canada, has been witnessing track deterioration through differential settlements. These differential settlements, termed sinkholes, have been linked to t...

Human Factors Countermeasures to Improve Highway-Railway Intersection Safety

DOT National Transportation Integrated Search

1973-07-01

A field demonstration study in support of the evaluation of alternative railway-highway grade crossing accident countermeasures was conducted. Guidelines were provided for the development of countermeasure concepts. Investigations of the causative fa...

Investigations and results concerning railway-induced ground-borne vibrations in Germany

NASA Astrophysics Data System (ADS)

Degen, K. G.; Behr, W.; Grütz, H.-P.

2006-06-01

Besides noise reduction, ground-borne vibrations induced by railways are another important environmental issue associated with the construction of new or the reconstruction of existing railway lines that had to be tackled during the last decade. Annoyance can occur, particularly for lines in urban areas at small distances to neighbouring houses or lines in shallow depth tunnels under buildings. The ground-borne vibrations can be perceived by the inhabitants via the floor vibrations, as well as via the air-borne noise radiated inside the building by the vibrating building structures (secondary noise). At present, legal specifications for judging railway-induced ground-borne vibrations do not exist in Germany. In order to review common practices, an experimental psycho-physical laboratory study was performed. To estimate the annoyance of railway-induced vibrations, the mean vibration energy of a train pass-by seems much more significant and related to the annoyance than the commonly used RMS value according to the German standard DIN 4150-2. The minimum difference in vibration that can be felt by people was found at a signal difference of 25%. This paper will review results of a project performed in cooperation with the engineering office Obermeyer in Munich and the Technical University of Munich [A. Said, D. Fleischer, H. Kilcher, H. Fastl, H.-P. Grütz, Zur Bewertung von Erschütterungsimmissionen aus dem Schienenverkehr, Zeitschrift fuer Lärmbekämpfung, Vol. 48(6), Springer VDI Verlag, Düsseldorf, 2001.] and will link them to further demands on research and on development of suitable guiding principles and legislative regulations.

Evaluation of odometry algorithm performances using a railway vehicle dynamic model

NASA Astrophysics Data System (ADS)

Allotta, B.; Pugi, L.; Ridolfi, A.; Malvezzi, M.; Vettori, G.; Rindi, A.

2012-05-01

In modern railway Automatic Train Protection and Automatic Train Control systems, odometry is a safety relevant on-board subsystem which estimates the instantaneous speed and the travelled distance of the train; a high reliability of the odometry estimate is fundamental, since an error on the train position may lead to a potentially dangerous overestimation of the distance available for braking. To improve the odometry estimate accuracy, data fusion of different inputs coming from a redundant sensor layout may be used. Simplified two-dimensional models of railway vehicles have been usually used for Hardware in the Loop test rig testing of conventional odometry algorithms and of on-board safety relevant subsystems (like the Wheel Slide Protection braking system) in which the train speed is estimated from the measures of the wheel angular speed. Two-dimensional models are not suitable to develop solutions like the inertial type localisation algorithms (using 3D accelerometers and 3D gyroscopes) and the introduction of Global Positioning System (or similar) or the magnetometer. In order to test these algorithms correctly and increase odometry performances, a three-dimensional multibody model of a railway vehicle has been developed, using Matlab-Simulink™, including an efficient contact model which can simulate degraded adhesion conditions (the development and prototyping of odometry algorithms involve the simulation of realistic environmental conditions). In this paper, the authors show how a 3D railway vehicle model, able to simulate the complex interactions arising between different on-board subsystems, can be useful to evaluate the odometry algorithm and safety relevant to on-board subsystem performances.

Time-Dependent Topology of Railway Prestressed Concrete Sleepers

NASA Astrophysics Data System (ADS)

Li, Dan; Ngamkhanong, Chayut; Kaewunruen, Sakdirat

2017-10-01

The railway sleepers are very important component of railway track structure. The sleepers can be manufactured by using timber, concrete, steel or other engineered materials. Nowadays, prestressed concrete has become most commonly used type of sleepers. Prestressed concrete sleepers have longer life-cycle and lower maintenance cost than reinforced concrete sleepers. They are expected to withstand high dynamic loads and harsh environments. However, durability and long-term performance of prestressed concrete sleepers are largely dependent on creep and shrinkage responses. This study investigates the long-term behaviours of prestressed concrete sleepers and proposes the shortening and deflection diagrams. Comparison between design codes of Eurocode 2 and AS3600-2009 provides the insight into the time-dependent performance of prestressed concrete sleepers. The outcome of this paper will improve the rail maintenance and inspection criteria in order to establish appropriate sensible remote track condition monitor network in practice.

A lesson from Japan: research and development efficiency is a key element of pharmaceutical industry consolidation process.

PubMed

Shimura, Hirohisa; Masuda, Sachiko; Kimura, Hiromichi

2014-02-01

Scholarly attention to pharmaceutical companies' ability to sustain research and development (R&D) productivity has increased as they increasingly handle business challenges. Furthermore, the deterioration of R&D productivity has long been considered a major cause of mergers and acquisitions (M&As). This study attempts to investigate quantitatively the possible causes of the deterioration and the relationship between the deterioration and M&As by examining the Japanese pharmaceutical industry. Japan from 1980 to 1997 is an ideal case because of the availability of official data, but more importantly the significant changes in its business environment at the time. Using the Malmquist Index and data envelopment analysis, we measured the deterioration of R&D productivity from 1980 to 1997 based on a sample of 15 Japanese companies. Two lessons can be learned from Japan's case. First, to sustain R&D productivity over the long term, companies should use licensing activities and focus on the dominant therapeutic franchises. Second, if a company fails significantly to catch up with the benchmark, it is likely to pursue an M&A or seek an alternative way to improve R&D productivity. These findings appear similar to the current situation of the global pharmaceutical industry, although Japan pursued more licensing activities than M&A to improve R&D productivity.

Seismic Retrofitting of an Existing Steel Railway Bridge by Fluid Viscous Dampers

NASA Astrophysics Data System (ADS)

Gangopadhyay, Avijit; Ghosh, Aparna Dey

2016-09-01

There are over a lakh of bridges in the Indian Railways, many of which have become seismically deficient, either through aging or due to inadequate seismic design considerations. The extensive damage of bridges all over the world in recent earthquakes has propelled significant advancement in earthquake protection and retrofitting of bridges. Amongst various passive control systems that are reliable as well as cost-effective, Fluid Viscous Dampers (FVDs) are proving to be successful in bridge vibration control. Orificed FVDs, commercially available as Taylor Devices, have already been successfully installed in several bridges worldwide. However, there has been no such application or study related to Indian railway bridges. In this paper, an existing thirty years' old railway bridge in Jharkhand, India, has been analyzed in SAP2000v14 considering reduced stiffness and found deficient when subjected to spectrum-compatible accelerograms. Subsequent retrofitting of the bridge superstructure with FVDs has been carried out and the results indicate substantial reductions in the responses of the bridge deck.

Color Vision and the Railways: Part 2. Comparison of the CN Lantern Used on the Canadian Railways and Railway LED Lantern Tests.

PubMed

Dain, Stephen J; Casolin, Armand; Long, Jennifer

2015-02-01

There are two currently available lantern tests that have their design based solely on the practices of the rail industry. These are the CN Lantern (CNLAN) used on the Canadian Railways and the Railway LED Lantern Tests (RLLT). In the same way that the signaling practices differ in the two jurisdictions, the design of the lanterns also differ. The CIE (Commission Internationale de l'Éclairage)-recommended color vision standards for transport predate both lanterns. The study was undertaken to assess the appropriateness of these lanterns in CIE Color Vision Standard 1. CIE Standard 1 is called "Normal color vision" but some very mild anomalous trichromats may pass the specified "lantern test that presents a high level of difficulty." The lantern tests were undertaken by 46 color vision-normal and 37 color vision-deficient subjects. Subjects made more errors on the RLLT, and the pattern of errors is different, partly because there are blank presentations in the RLLT and "no light" is an acceptable response. The two lanterns showed agreement on the pass/fail categorization of 73 of the 83 subjects. The RLLT fails more color vision-normal subjects. Despite the different construction principles, the RLLT and CNLAN have pass/fail levels that are comparable with the Holmes-Wright Type B lantern, which is nominated in CIE Color Vision Standard 1 but is no longer commercially available. The higher failure rate of color vision-normal subjects on the RLLT has been addressed by changing the intensities of the two darkest red lights.

Long-Term Deflection Prediction from Computer Vision-Measured Data History for High-Speed Railway Bridges

PubMed Central

Lee, Jaebeom; Lee, Young-Joo

2018-01-01

Management of the vertical long-term deflection of a high-speed railway bridge is a crucial factor to guarantee traffic safety and passenger comfort. Therefore, there have been efforts to predict the vertical deflection of a railway bridge based on physics-based models representing various influential factors to vertical deflection such as concrete creep and shrinkage. However, it is not an easy task because the vertical deflection of a railway bridge generally involves several sources of uncertainty. This paper proposes a probabilistic method that employs a Gaussian process to construct a model to predict the vertical deflection of a railway bridge based on actual vision-based measurement and temperature. To deal with the sources of uncertainty which may cause prediction errors, a Gaussian process is modeled with multiple kernels and hyperparameters. Once the hyperparameters are identified through the Gaussian process regression using training data, the proposed method provides a 95% prediction interval as well as a predictive mean about the vertical deflection of the bridge. The proposed method is applied to an arch bridge under operation for high-speed trains in South Korea. The analysis results obtained from the proposed method show good agreement with the actual measurement data on the vertical deflection of the example bridge, and the prediction results can be utilized for decision-making on railway bridge maintenance. PMID:29747421

Long-Term Deflection Prediction from Computer Vision-Measured Data History for High-Speed Railway Bridges.

PubMed

Lee, Jaebeom; Lee, Kyoung-Chan; Lee, Young-Joo

2018-05-09

Management of the vertical long-term deflection of a high-speed railway bridge is a crucial factor to guarantee traffic safety and passenger comfort. Therefore, there have been efforts to predict the vertical deflection of a railway bridge based on physics-based models representing various influential factors to vertical deflection such as concrete creep and shrinkage. However, it is not an easy task because the vertical deflection of a railway bridge generally involves several sources of uncertainty. This paper proposes a probabilistic method that employs a Gaussian process to construct a model to predict the vertical deflection of a railway bridge based on actual vision-based measurement and temperature. To deal with the sources of uncertainty which may cause prediction errors, a Gaussian process is modeled with multiple kernels and hyperparameters. Once the hyperparameters are identified through the Gaussian process regression using training data, the proposed method provides a 95% prediction interval as well as a predictive mean about the vertical deflection of the bridge. The proposed method is applied to an arch bridge under operation for high-speed trains in South Korea. The analysis results obtained from the proposed method show good agreement with the actual measurement data on the vertical deflection of the example bridge, and the prediction results can be utilized for decision-making on railway bridge maintenance.

78 FR 802 - Heart of Texas Railroad, L.P.-Acquisition and Operation Exemption-Gulf Colorado & San Saba...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-04

... Railroad, L.P.--Acquisition and Operation Exemption--Gulf Colorado & San Saba Railway Company Heart of Texas Railroad, L.P. (the Company), a noncarrier, has filed a verified notice of exemption under 49 CFR 1150.31 to acquire from Gulf Colorado & San Saba Railway Company (the Seller), and to operate...

76 FR 27173 - Carolina Coastal Railway, Inc.-Acquisition and Operation Exemption-Rocky Mount & Western Railroad...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-10

... Railway, Inc.--Acquisition and Operation Exemption--Rocky Mount & Western Railroad Co., Inc. d/b/a Nash County Railroad Carolina Coastal Railway, Inc. (CLNA), a Class III rail carrier, has filed a verified notice of exemption under 49 CFR 1150.41 to acquire from Rocky Mount & Western Railroad Co., Inc. d/b/a...

76 FR 22746 - Conecuh Valley Railway, LLC-Acquisition and Operation Exemption-Conecuh Valley Railroad Co., Inc.

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-22

... Railway, LLC--Acquisition and Operation Exemption--Conecuh Valley Railroad Co., Inc. Conecuh Valley Railway, LLC (CVR), a noncarrier, has filed a verified notice of exemption under 49 CFR 1150.31 to acquire from Conecuh Valley Railroad Co., Inc. (COEH), and to operate [[Page 22747

The Japanese Automobile Worker: A Microcosm of Japan's Success.

ERIC Educational Resources Information Center

Kaderabeck, Elizabeth A.

A teaching unit on the Japanese automobile worker was developed from a compilation of on-site interviews with Japanese company managers and production line employees, and official publications of the Japanese car industry. The unit is designed to present a balanced picture of Japan's economic success and labor relations and to develop global…

77 FR 2442 - Airworthiness Directives; The Boeing Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-18

... removed for any alternative designs (e.g., TDG Aerospace UFI). Japan Airlines (JAL) noted that the... or concurrently with the installation of the ground fault interrupt relays, a dual crossfeed valve is...) Applicability This AD applies to The Boeing Company Model 767-200, -300, - 300F, and -400ER series airplanes...

78 FR 4981 - Pacific Imperial Railroad, Inc.-Change in Operator Exemption-Rail Line of San Diego and Arizona...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-23

... Railroad, Inc.--Change in Operator Exemption-- Rail Line of San Diego and Arizona Eastern Railway Company... 1150.31 to change operators from San Diego & Imperial Valley Railroad Company, Inc. (SDIY) \\1\\ to PIR... City, Cal. (Desert Line). The Desert Line is owned by San Diego and Arizona Eastern Railway Company (SD...

A Review on the Development of New Materials for Construction of Prestressed Concrete Railway Sleepers

NASA Astrophysics Data System (ADS)

Raj, Anand; Nagarajan, Praveen; Shashikala, A. P.

2018-03-01

Railways form the backbone of all economies, transporting goods, and passengers alike. Sleepers play a pivotal role in track performance and safety in rail transport. This paper discusses in brief about the materials that have been used in making sleepers in the early stages of railways. Extensive studies have been carried out on the static, dynamic and impact analysis of prestressed sleepers all around the globe. It has been shown that majority of the sleepers do not last till their expected design life resulting in massive replacement and repair cost. The primary reasons leading to the failure of sleepers have been summarised. This article also highlights the use of new materials developed recently for the construction of prestressed concrete sleepers to improve the performance and life of railway sleepers. Use of geopolymer concrete and steel fibre reinforced concrete, assist in the reduction of flexural cracking, whereas rubber concrete enhances the impact resistance of concrete by three folds. This paper presents a review of state of the art of new materials for railway sleepers.

[Chapter 4. Transitions in pharmaceutical market, production and sales in Japan (1980-2010)].

PubMed

Yoshioka, Ryuzo; Matsumoto, Kazuo

2014-01-01

In this paper, the writers reviewed in detail the pharmaceutical market and the shifts in manufacturing and sales including the trade balance in Japan over a thirty-year period from 1980 to 2010. From the 1980s to the 1990s, many innovative pharmaceutical products were developed and launched in the Japanese market. During the same period, some Japanese companies managed to develop their first internationally marketable drugs, which were antibiotics and effective remedies for the digestive and circulatory organs. During this period, Japanese pharmaceutical companies were also able to launch some of blockbuster drugs. For two decades, the pharmaceutical market grew rapidly. For this reason, it can be called "The Growth Period for Pharmaceutical Products" in Japan. After that period, drug development and sales slowed down due to a lack of expertise in genetic engineering and biotechnologies. This situation caused a large deficit in the trade balance for Japanese pharmaceutical products. However, with regard to the trade balance (including technical royalties) for pharmaceutical product technologies, Japan remains in the black even today.

A semi-empirical model for the prediction of fouling in railway ballast using GPR

NASA Astrophysics Data System (ADS)

Bianchini Ciampoli, Luca; Tosti, Fabio; Benedetto, Andrea; Alani, Amir M.; Loizos, Andreas; D'Amico, Fabrizio; Calvi, Alessandro

2016-04-01

The first step in the planning for a renewal of a railway network consists in gathering information, as effectively as possible, about the state of the railway tracks. Nowadays, this activity is mostly carried out by digging trenches at regular intervals along the whole network, to evaluate both geometrical and geotechnical properties of the railway track bed. This involves issues, mainly concerning the invasiveness of the operations, the impacts on the rail traffic, the high costs, and the low levels of significance concerning such discrete data set. Ground-penetrating radar (GPR) can represent a useful technique for overstepping these issues, as it can be directly mounted onto a train crossing the railway, and collect continuous information along the network. This study is aimed at defining an empirical model for the prediction of fouling in railway ballast, by using GPR. With this purpose, a thorough laboratory campaign was implemented within the facilities of Roma Tre University. In more details, a 1.47 m long × 1.47 m wide × 0.48 m height plexiglass framework, accounting for the domain of investigation, was laid over a perfect electric conductor, and filled up with several configuration of railway ballast and fouling material (clayey sand), thereby representing different levels of fouling. Then, the set of fouling configurations was surveyed with several GPR systems. In particular, a ground-coupled multi-channel radar (600 MHz and 1600 MHz center frequency antennas) and three air-launched radar systems (1000 MHz and 2000 MHz center frequency antennas) were employed for surveying the materials. By observing the results both in terms of time and frequency domains, interesting insights are highlighted and an empirical model, relating in particular the shape of the frequency spectrum of the signal and the percentage of fouling characterizing the surveyed material, is finally proposed. Acknowledgement The Authors thank COST, for funding the Action TU1208 "Civil

“Sapsan”-carriages defrosting station of Nizhniy Novgorod railway service enterprise and its surface waste water purification

NASA Astrophysics Data System (ADS)

Strelkov, Alexander; Teplykh, Svetlana; Gorshkalev, Pavel; Bystranova, Anastasia

2017-10-01

Surface water disposal is one of the most relevant problems for Nizhniy Novgorod railway service enterprises. Waste water must be quickly removed with special drainage devices and water drainage facilities (culverts, slope drains, pipes, ditches, etc.). During “Sapsan”-carriages defrosting watse water is aggregated on railroad tracks. It leads to track bed structure sagging, roadbed washaway and damages to point switches. In this paper the authors describe a concrete system of waste water disposal from railway service enterprises. This system is realized through culverts readjusted at the foot of ballast section. Thereafter, the collected water is pumped into a water collector and to local sewage waste-disposal plants. For railway stations with three or more tracks surface runoff diversion scheme depends on topography, railway tracks types, flow discharge and is compiled individually for each object. This paper examines “Sapsan”-carriages defrosting station of Nizhniy Novgorod railway service enterprise. It presents a technology scheme and equipment consisting of Sand catcher LOS-P, Oil catcher LOS-N, pressure-tight flotation unit; drain feed pump; solution-consuming tank of the coagulant, the solution-consuming tank of flocculant. The proposed technology has been introduced into the project practice.

[Hygienic optimization of the use of chemical protective means on railway transport].

PubMed

Kaptsov, V A; Pankova, V B; Elizarov, B B; Mezentsev, A P; Komleva, E A

2004-01-01

The paper presents data characterizing the working conditions of railway workers. It shows that there is the greatest levels of noise and vibration, the burden and intensity of work. The worst working conditions are noted in energy supply, car, locomotive services and track facilities. The working conditions determine a significant industrial risk of railway workers since the prevention of health abnormalities by using chemical protective means is a topical problem. The priority lines of hygienic rationale for optimization the choice and use of chemical protective means for workers exposed to occupational hazards are determined.

The impact of personality on driving safety among Chinese high-speed railway drivers.

PubMed

Guo, Ming; Wei, Wei; Liao, Ganli; Chu, Fulei

2016-07-01

This study explored the impact of personality traits on driving safety in high-speed railway drivers. A sample of high-speed railway drivers in Beijing (N=214) completed a questionnaire, including information on personality traits and background variables. The NEO Five Factor Inventory (NEO-FFI) was administered to characterize participants based on five personality traits: Neuroticism, Extraversion, Agreeableness, Openness to Experience, and Conscientiousness. The survey data were combined with naturalistic data of accident involvement and risky driving behavior in China. Poisson regression results show that drivers with high Conscientiousness and Extraversion caused fewer accidents. Higher Conscientiousness and lower Agreeableness were related to less frequent risky driving behavior. Education level and age negatively moderated the relation between certain personality traits and driving safety. The findings suggest that personality traits should be considered when selecting and training high-speed railway drivers. Copyright © 2016 Elsevier Ltd. All rights reserved.

Analysis of railway track vibration

NASA Astrophysics Data System (ADS)

Ono, K.; Yamada, M.

1989-04-01

Analytical formulae are developed for estimating the amplitudes of the vibrations generated in railway tracks by wheels and rail discontinuities or by unevennesses on their surfaces. Rails are assumed to be supported elastically on concrete sleepers by resilient rail-pads inserted between them. The elasticities and the masses of track materials and those of the roadbed are also taken into consideration. It is shown that after an impulse is applied to the track, not only is a vibration with a comparatively low natural frequency generated, but also traveling waves with higher frequencies, and the latter propagate lengthwise along the track or downwards into the roadbed. With the assumption that the power spectral density of the unevennesses on the rail surface is in proportion to the third power of the wavelength, or to (wavenumber) -3, the amplitudes of the vibrations in railway tracks supported by rail-pads and roadbeds with various magnitudes of elastic constants are analyzed and the values for each one-third octave band are estimated. The velocity of the vibration takes on a maximum value for the band with a center frequency of 63 Hz, which corresponds to the resonant frequency of the system composed of the wheel and the track. As the frequency increases beyond this value, the velocity of the vibration takes on a second maximum value at a frequency of about 1000 Hz. These estimates are compared with the data obtained from field measurements and reasonably good correlations are found between them.

75 FR 7537 - Elkhart & Western Railroad Co.-Lease and Operation Exemption-Norfolk Southern Railway Company

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-19

... Michigan Southern Railroad Company--Corporate Family Transaction Exemption, STB Finance Docket No. 33941... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [STB Finance Docket No. 35347] Elkhart... becomes effective). An original and 10 copies of all pleadings, referring to STB Finance Docket No. 35347...

Impact capacity reduction in railway prestressed concrete sleepers with vertical holes

NASA Astrophysics Data System (ADS)

Ngamkhanong, Chayut; Li, Dan; Kaewunruen, Sakdirat

2017-09-01

Railway prestressed concrete sleepers (or railroad ties) are principally designed in order to carry wheel loads from the rails to the ground as well as to secure rail gauge for dynamic safe movements of trains. In spite of the most common use of the prestressed concrete sleepers in railway tracks, the concrete sleepers are often modified on construction sites to fit in other systems such as cables, signalling gears, drainage pipes, etc. This is because those signalling, fibre optic, equipment cables are often damaged either by ballast corners or by tamping machine. It is thus necessary to modify concrete sleepers to cater cables internally so that the cables or drainage pipes would not experience detrimental or harsh environments. Accordingly, this study will extend from the previous study into the design criteria of holes and web openings. This paper will highlight structural capacity of concrete sleepers under dynamic transient loading. The modified compression field theory for ultimate strength design of concrete sleepers will be highlighted in this study. The outcome of this study will improve the understanding into dynamic behavior of prestressed concrete sleepers with vertical holes. The insight will enable predictive track maintenance regime in railway industry.

Sensitivity analysis of free vibration characteristics of an in situ railway concrete sleeper to variations of rail pad parameters

NASA Astrophysics Data System (ADS)

Kaewunruen, Sakdirat; Remennikov, Alex M.

2006-11-01

The vibration of in situ concrete sleepers in a railway track structure is a major factor causing cracking of prestressed concrete sleepers and excessive railway track maintenance cost. Not only does the ballast interact with the sleepers, but the rail pads also take part in affecting their free vibration characteristics. This paper presents a sensitivity analysis of free vibration behaviors of an in situ railway concrete sleeper (standard gauge sleeper), incorporating sleeper/ballast interaction, subjected to the variations of rail pad properties. Through finite element analysis, Timoshenko-beam and spring elements were used in the in situ railway concrete sleeper modeling. This model highlights the influence of rail pad parameters on the free vibration characteristics of in situ sleepers. In addition, information on the first five flexural vibration modes indicates the dynamic performance of railway track when using different types of rail pads, as it plays a vital role in the cracking deterioration of concrete sleepers.

Research on noise and vibration reduction at DB to improve the environmental friendliness of railway traffic

NASA Astrophysics Data System (ADS)

Schulte-Werning, B.; Beier, M.; Degen, K. G.; Stiebel, D.

2006-06-01

One of the most prominent keywords relating to the environmental friendliness of railway traffic is noise reduction. Thus, the research and development programme "Low Noise Railway" of Deutsche Bahn (DB) is under way to treat the noise of the vehicles and infrastructure. The noise reduction of the trains and the rail/wheel system are being tackled within several projects. The direct noise experienced by railway-lineside residents due to train movements on the track can be reduced by minimising the sound radiation directly at the source. This is the first-choice solution, as it proves to be the most effective countermeasure regarding a cost-benefit relation. The limit values for the noise emission as specified in the technical specification for interoperability are an essential criterion to be confirmed during the procurement process of railway vehicles. A recently developed acoustical quality management scheme establishes systematic noise management to complete the vehicle procurement process in the phases of concept, design, construction and manufacturing. In freight traffic quiet railway wheels for block brake operation will play an important role in the future to meet the goal of a low-noise railway system. A first attempt to realise successfully the low-noise potential of such optimised wheels was performed, even if with mixed results. To show ways of reducing the noise of the cooling ventilation in locomotives, DB is a partner in a development project led by Siemens. A notable 8 dB(A) noise reduction was measured. Concerning bridge noise, a project was started based on an effective and cost-efficient combination of experiments and simulations in order to develop specifications for the construction of generic low-noise bridges.

A study of the impact of occupational and domestic factors on insomnia among industrial workers of a manufacturing company in Japan.

PubMed

Tachibana, H; Izumi, T; Honda, S; Horiguchi, I; Manabe, E; Takemoto, T

1996-06-01

Insomnia is one of the most common health problems and has recently been re-termed 'Disorders of initiating and Maintaining Sleep', or DIMS. The main purpose of the present study was to investigate the relationship between daily psychosocial stressors, to which workers are exposed in occupational and/or private life, and insomnia among male industrial workers in a medium-sized company located in Nagasaki City, Japan. All of the workers in the company (n = 368, male = 319) were asked to answer six sleep related questions and 24 questions about working and private conditions. Two hundred and seventy-one (85.0%) of them completed the questionnaire (average age was 40.9 years old). Twenty seven point seven per cent of the subjects complained of insomnia in the last month prior to the survey and the prevalence was in general accord with previous surveys. On the other hand, the proportion of hypnotic use (1.1%), especially in insomniac group (2.7%) was lower than previous reports. The results of multiple logistic regression analysis demonstrated that four psychosocial factors were significantly associated with insomnia: i.e. VDT work overload (odds ratio [OR] 5.058; 95% confidence intervals [95% CI] 2.381-10.745), limited space of bedroom (OR 2.612; 95% CI 1.283-5.683), over-involvement in job (OR 2.78; 95% CI 1.188-6.540), frequent alcohol beverages consumption (OR 2.595; CI 1.77-5.719).

[Response of Pharmaceutical Companies to the Crisis of Post-Marketing Clinical Trials of Anti-Cancer Agents -- Results of Questionnaires to Pharmaceutical Companies].

PubMed

Nakajima, Toshifusa

2016-04-01

Investigator-oriented post-marketing clinical trials of anti-cancer agents are faced to financial crisis due to drastic decrease in research-funds from pharmaceutical companies caused by a scandal in 2013. In order to assess the balance of research funds between 2012 and 2014, we made queries to 26 companies manufacturing anti-cancer agents, and only 10 of 26 responded to our queries. Decrease in the fund was observed in 5 of 10, no change in 1, increase in 3 and no answer in 1. Companies showed passive attitude to carry out doctor-oriented clinical trials of off-patent drugs or unapproved drugs according to advanced medical care B program, though some companies answered to proceed approved routines of these drugs if clinical trials showed good results. Most companies declined to make comments on the activity of Japan Agency for Medical Research and Development (AMED), but some insisted to produce good corroboration between AMED and pharmaceutical companies in order to improve the quality of trials. Further corroboration must be necessary for this purpose among researchers, governmental administrative organs, pharmaceutical companies, patients' groups, and mass-media.

Think tank (3) - Present activities of other representative organizations

NASA Astrophysics Data System (ADS)

Obara, Michio

There were some think tank businesses in Japan before the war. South Manchuria Railway Company established its Research Department for the purpose of getting power to control Manchuria as a colony, and got the good results. Think tank business was flourishing three times after the war. This business attracts much attention when the social and economic paradigm is going to change. Among the key large-scale think tanks in Japan, Nomura Research Institute, Ltd. (NRI) was the first to enhance the system functions by the merger, and posted think tank function up in the SI business. Mitsubishi Research Institute, Inc. (MRI) intends to be an orthodox think tank, and established an advanced research institute and the laboratory for R&D. Daiwa Institute of Research, Ltd. (DIR) focuses on economic forecast by using system. Fuji Research Institute, Corp. (FUJI RIC) focuses on survey and policy proposing in macro-economics, and analyzing technology. The Japan Research Institute, Ltd. (JRI) focuses on regional development, and R&D in advanced technology.

An evaluation method of power quality about electrified railways connected to power grid based on PSCAD/EMTDC

NASA Astrophysics Data System (ADS)

Liang, Weibin; Ouyang, Sen; Huang, Xiang; Su, Weijian

2017-05-01

The existing modeling process of power quality about electrified railways connected to power grid is complicated and the simulation scene is incomplete, so this paper puts forward a novel evaluation method of power quality based on PSCAD/ETMDC. Firstly, a model of power quality about electrified railways connected to power grid is established, which is based on testing report or measured data. The equivalent model of electrified locomotive contains power characteristic and harmonic characteristic, which are substituted by load and harmonic source. Secondly, in order to make evaluation more complete, an analysis scheme has been put forward. The scheme uses a combination of three-dimensions of electrified locomotive, which contains types, working conditions and quantity. At last, Shenmao Railway is taken as example to evaluate the power quality at different scenes, and the result shows electrified railways connected to power grid have significant effect on power quality.

The railway suicide death of a famous German football player: impact on the subsequent frequency of railway suicide acts in Germany.

PubMed

Ladwig, Karl-Heinz; Kunrath, Sabine; Lukaschek, Karoline; Baumert, Jens

2012-01-01

The railway suicide of Robert Enke, an internationally respected German football goal keeper, sent shockwaves throughout the world of football. We analyzed its impact on the frequency of subsequent railway suicide acts (RS). Two analytic approaches were performed applying German Railway Event database Safety (EDS) data: first, an inter-year approach comparing the incidence of RS during a predefined "index period" with identical time windows in 2006 to 2008; second, an intra-year approach comparing the number of RS 28 days before and after the incidence. To analyze a possible "compensatory deficit", the number of RS in the subsequent first quarter of 2010 was compared with the identical time windows in the preceding three years. Incidence ratios with 95% confidence intervals were estimated by Poisson regression. Findings were controlled for temperature. Compared to the preceding three years, the incidence ratio (IR) of the number of RS in the index period increased by 1.81 (1.48-2.21; p<0.001), leading to an overall percentage change of 81% (48-121%; p<0.001). Comparing the number of suicides 28 days before and after the incidence revealed an even more pronounced increase of IR (2.2; 1.6-3.0). No modifications of these associations were observed by daytime, by location of the suicide and fatality. No compensatory deficit occurred in the post-acute period. The substantial increase of RS in the aftermath of the footballer's suicide death brought about copycat behavior in an unforeseen amount, even though the media reporting was largely sensitive and preventive measures were taken. Copyright © 2011 Elsevier B.V. All rights reserved.

Influence of Surface Abrasion on Creep and Shrinkage of Railway Prestressed Concrete Sleepers

NASA Astrophysics Data System (ADS)

Li, Dan; Ngamkhanong, Chayut; Kaewunruen, Sakdirat

2017-10-01

Ballasted railway track is very suitable for heavy-rail networks because of its many superior advantages in design, construction, short- and long-term maintenance, sustainability, and life-cycle cost. The sleeper, which supports rail and distributes loads from rail to ballast, is a very important component of rail track system. Prestressed concrete is very popular used in manufacturing sleepers. Therefore, improved knowledge about design techniques for prestressed concrete (PC) sleepers has been developed. However, the ballast angularity causes differential abrasions on the soffit or bottom surface of sleepers. Furthermore, in sharp curves and rapid gradient change, longitudinal and lateral dynamics of rails increase the likelihood of abrasions in concrete sleepers. This paper presents a comparative investigation using a variety of methods to evaluate creep and shrinkage effects in railway prestressed concrete sleepers. The outcome of this study will improve the material design, which is very critical to the durability of railway track components.

Robust optimization model and algorithm for railway freight center location problem in uncertain environment.

PubMed

Liu, Xing-Cai; He, Shi-Wei; Song, Rui; Sun, Yang; Li, Hao-Dong

2014-01-01

Railway freight center location problem is an important issue in railway freight transport programming. This paper focuses on the railway freight center location problem in uncertain environment. Seeing that the expected value model ignores the negative influence of disadvantageous scenarios, a robust optimization model was proposed. The robust optimization model takes expected cost and deviation value of the scenarios as the objective. A cloud adaptive clonal selection algorithm (C-ACSA) was presented. It combines adaptive clonal selection algorithm with Cloud Model which can improve the convergence rate. Design of the code and progress of the algorithm were proposed. Result of the example demonstrates the model and algorithm are effective. Compared with the expected value cases, the amount of disadvantageous scenarios in robust model reduces from 163 to 21, which prove the result of robust model is more reliable.

Recommendations for KYTC's railway/highway at-grade crossing management practices.

DOT National Transportation Integrated Search

2014-12-01

An ideal Railway/Highway At-Grade Crossing Management program involves selecting cost-effective : practices when designing new crossings and rehabilitating existing crossings. This report outlines two : strategies to enhance KYTCs existing program...

39. TUNNEL BORE UNDER CONSTRUCTION. VIEW SHOWS LIGHT CONSTRUCTION RAILWAY ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

39. TUNNEL BORE UNDER CONSTRUCTION. VIEW SHOWS LIGHT CONSTRUCTION RAILWAY FOR HAULING MUCK AND SPOIL - Zion-Mount Carmel Highway, Tunnel, Two miles east of Zion Canyon Scenic Drive, Springdale, Washington County, UT

Minimum depth of soil cover above long-span soil-steel railway bridges

NASA Astrophysics Data System (ADS)

Esmaeili, Morteza; Zakeri, Jabbar Ali; Abdulrazagh, Parisa Haji

2013-12-01

Recently, soil-steel bridges have become more commonly used as railway-highway crossings because of their economical advantages and short construction period compared with traditional bridges. The currently developed formula for determining the minimum depth of covers by existing codes is typically based on vehicle loads and non-stiffened panels and takes into consideration the geometrical shape of the metal structure to avoid the failure of soil cover above a soil-steel bridge. The effects of spans larger than 8 m or more stiffened panels due to railway loads that maintain a safe railway track have not been accounted for in the minimum cover formulas and are the subject of this paper. For this study, two-dimensional finite element (FE) analyses of four low-profile arches and four box culverts with spans larger than 8 m were performed to develop new patterns for the minimum depth of soil cover by considering the serviceability criterion of the railway track. Using the least-squares method, new formulas were then developed for low-profile arches and box culverts and were compared with Canadian Highway Bridge Design Code formulas. Finally, a series of three-dimensional (3D) finite element FE analyses were carried out to control the out-of-plane buckling in the steel plates due to the 3D pattern of train loads. The results show that the out-of-plane bending does not control the buckling behavior of the steel plates, so the proposed equations for minimum depth of cover can be appropriately used for practical purposes.

Japan's technology and manufacturing infrastructure

NASA Astrophysics Data System (ADS)

Boulton, William R.; Meieran, Eugene S.; Tummala, Rao R.

1995-02-01

The JTEC panel found that, after four decades of development in electronics and manufacturing technologies, Japanese electronics companies are leaders in the development, support, and management of complex, low-cost packaging and assembly technologies used in the production of a broad range of consumer electronics products. The electronics industry's suppliers provide basic materials and equipment required for electronic packaging applications. Panelists concluded that some Japanese firms could be leading U.S. competitors by as much as a decade in these areas. Japan's technology and manufacturing infrastructure is an integral part of its microelectronics industry's success.

Japan's technology and manufacturing infrastructure

NASA Technical Reports Server (NTRS)

Boulton, William R.; Meieran, Eugene S.; Tummala, Rao R.

1995-01-01

The JTEC panel found that, after four decades of development in electronics and manufacturing technologies, Japanese electronics companies are leaders in the development, support, and management of complex, low-cost packaging and assembly technologies used in the production of a broad range of consumer electronics products. The electronics industry's suppliers provide basic materials and equipment required for electronic packaging applications. Panelists concluded that some Japanese firms could be leading U.S. competitors by as much as a decade in these areas. Japan's technology and manufacturing infrastructure is an integral part of its microelectronics industry's success.

Measuring driver responses at railway level crossings.

PubMed

Tey, Li-Sian; Ferreira, Luis; Wallace, Angela

2011-11-01

Railway level crossings are amongst the most complex of road safety control systems, due to the conflicts between road vehicles and rail infrastructure, trains and train operations. Driver behaviour at railway crossings is the major collision factor. The main objective of the present paper was to evaluate the existing conventional warning devices in relation to driver behaviour. The common conventional warning devices in Australia are a stop sign (passive), flashing lights and a half boom-barrier with flashing lights (active). The data were collected using two approaches, namely: field video recordings at selected sites and a driving simulator in a laboratory. This paper describes and compares the driver response results from both the field survey and the driving simulator. The conclusion drawn is that different types of warning systems resulted in varying driver responses at crossings. The results showed that on average driver responses to passive crossings were poor when compared to active ones. The field results were consistent with the simulator results for the existing conventional warning devices and hence they may be used to calibrate the simulator for further evaluation of alternative warning systems. Copyright © 2011 Elsevier Ltd. All rights reserved.

1. General view of Oregon Electric Railway, view looking north ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. General view of Oregon Electric Railway, view looking north at Hedges Creek trestle. - Oregon Electric Railroad, Hedges Creek Trestle, Garden Home to Wilsonville Segment, Milepost 38.7, Garden Home, Washington County, OR

Detection of damaged supports under railway track based on frequency shift

NASA Astrophysics Data System (ADS)

Wang, Longqi; Zhang, Yao; Lie, Seng Tjhen

2017-03-01

In railway transportation systems, the tracks are usually fastened on sleepers which are supported by the ballast. A lot of research has been conducted to guarantee the safety of railway track because of its importance, and more concern is expressed about monitoring of track itself such as railway level and alignment. The ballast and fasteners which provide strong support to the railway track are important as well whereas the detection of loose or missing fasteners and damaged ballast mainly relies on visual inspection. Although it is reliable when the fastener is missing and the damaged ballast is on the surface, it provides less help if the fastener is only loose and the damaged ballast is under the sleepers, which are however frequently observed in practice. This paper proposes an approach based on frequency shift to identify the damaged supports including the loose or missing fasteners and damaged ballast. In this study, the rail-sleeper-ballast system is modeled as an Euler beam evenly supported by a series of springs, the stiffness of which are reduced when the fastener is loose or missing and the ballast under the sleepers is damaged. An auxiliary mass is utilized herein and when it is mounted on the beam, the natural frequencies of the whole system will change with respect to the location of the auxiliary mass. The auxiliary mass induced frequency shift is analyzed and it is found the natural frequencies change periodically when the supports are undamaged, whereas the periodicity will be broken due to damaged supports. In fact, the natural frequencies drop clearly when the auxiliary mass moves over the damaged support. A special damage index only using the information of the damaged states is proposed and both numerical and experimental examples are carried out to validate the proposed method.

Online Condition Monitoring of a Rail Fastening System on High-Speed Railways Based on Wavelet Packet Analysis

PubMed Central

Wei, Jiahong; Liu, Chong; Ren, Tongqun; Liu, Haixia; Zhou, Wenjing

2017-01-01

The rail fastening system is an important part of a high-speed railway track. It is always critical to the operational safety and comfort of railway vehicles. Therefore, the condition detection of the rail fastening system, looseness or absence, is an important task in railway maintenance. However, the vision-based method cannot identify the severity of rail fastener looseness. In this paper, the condition of rail fastening system is monitored based on an automatic and remote-sensing measurement system. Meanwhile, wavelet packet analysis is used to analyze the acceleration signals, based on which two damage indices are developed to locate the damage position and evaluate the severity of rail fasteners looseness, respectively. To verify the effectiveness of the proposed method, an experiment is performed on a high-speed railway experimental platform. The experimental results show that the proposed method is effective to assess the condition of the rail fastening system. The monitoring system significantly reduces the inspection time and increases the efficiency of maintenance management. PMID:28208732

[Interview study on autonomous chemical management system and the contribution of occupational health specialists in companies].

PubMed

Mori, Koji; Takebayashi, Toru

2004-09-01

Under the circumstance that autonomous risk management for chemicals is required in Japan, it is necessary to define fundamental steps for developing chemical management system that are applicable in various types of companies and to understand the effective contribution of chemical or occupational health specialists to the system. For the purposes, we conducted interviews with companies which have an advanced chemical management system in Japan. As the result, each company had a certain policy about detailedness level of collected hazard and exposure information, and also had an efficient risk management system to ensure workers' health in depending on the business type and situations. Moreover, it was commonly observed that the specialists played major roles in developing tools for risk assessment and control, and then business lines led execution of the risk management with their supports. Based on the interviews, we showed a hypothesis of basic steps in introducing autonomous chemical risk management system at the workplaces. It is necessary to verify the hypothesis and to develop a simple system that is applicable to middle or small size companies as the next step.

Annoyance due to railway vibration at different times of the day.

PubMed

Peris, Eulalia; Woodcock, James; Sica, Gennaro; Moorhouse, Andrew T; Waddington, David C

2012-02-01

The time of day when vibration occurs is considered as a factor influencing the human response to vibration. The aim of the present paper is to identify the times of day during which railway vibration causes the greatest annoyance, to measure the differences between annoyance responses for different time periods and to obtain estimates of the time of day penalties. This was achieved using data from case studies comprised of face-to-face interviews and internal vibration measurements (N=755). Results indicate that vibration annoyance differs with time of day and that separate time of day weights can be applied when considering exposure-response relationships from railway vibration in residential environments. © 2012 Acoustical Society of America

The growth of railway ground vibration problems - A review.

PubMed

Connolly, David P; Marecki, Grzegorz P; Kouroussis, Georges; Thalassinakis, Ioannis; Woodward, Peter K

2016-10-15

Ground-borne noise and vibration from railway lines can cause human distress/annoyance, and also negatively affect real estate property values. Therefore this paper analyses a collection of technical ground-borne noise and vibration reports, detailing commercial vibration assessments undertaken at 1604 railway track sections, in 9 countries across the world. A wide range of rail projects are considered including light rail, tram lines, underground/tunnelled lines, freight, conventional rail and high speed rail. It documents the rise in ground-borne vibration problems and trends in the prediction industry, with the aim of informing the current research area. Firstly, the reports are analysed chronologically and it is found that railway vibration is a growing global concern, and as such, assessments have become more prevalent. International assessment metrics are benchmarked and it is found that velocity decibels (VdB), vibration dose value (VDV) and peak particle velocity (PPV) are the most commonly used methods of assessment. Furthermore, to predict vibration levels, the physical measurement of frequency transfer functions is preferential to numerical modelling. Results from the reports show that ground vibration limits are exceeded in 44% of assessments, and that ground-borne noise limits are exceeded in 31%. Moreover, mitigation measures were required on approximately 50% of projects, revealing that ground-borne noise and vibration is a widespread railroad engineering challenge. To solve these problems, the most commonly used abatement strategy is a modification of the railtrack structure (active mitigation), rather than the implementation of a more passive solution in the far-field. Copyright © 2015 Elsevier B.V. All rights reserved.

77 FR 69542 - V and S Railway, LLC-Acquisition and Operation Exemption-Colorado Department of Transportation

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-19

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35664] V and S Railway.... 10502 from the prior approval requirements of 49 U.S.C. 10902 and 49 CFR 1150.1 et seq., for V and S Railway, LLC (V&S), a Class III rail carrier, to acquire approximately 121.9 miles of rail line between...

The Research on Safety Management Information System of Railway Passenger Based on Risk Management Theory

NASA Astrophysics Data System (ADS)

Zhu, Wenmin; Jia, Yuanhua

2018-01-01

Based on the risk management theory and the PDCA cycle model, requirements of the railway passenger transport safety production is analyzed, and the establishment of the security risk assessment team is proposed to manage risk by FTA with Delphi from both qualitative and quantitative aspects. The safety production committee is also established to accomplish performance appraisal, which is for further ensuring the correctness of risk management results, optimizing the safety management business processes and improving risk management capabilities. The basic framework and risk information database of risk management information system of railway passenger transport safety are designed by Ajax, Web Services and SQL technologies. The system realizes functions about risk management, performance appraisal and data management, and provides an efficient and convenient information management platform for railway passenger safety manager.

Propagation of variability in railway dynamic simulations: application to virtual homologation

NASA Astrophysics Data System (ADS)

Funfschilling, Christine; Perrin, Guillaume; Kraft, Sönke

2012-01-01

Railway dynamic simulations are increasingly used to predict and analyse the behaviour of the vehicle and of the track during their whole life cycle. Up to now however, no simulation has been used in the certification procedure even if the expected benefits are important: cheaper and shorter procedures, more objectivity, better knowledge of the behaviour around critical situations. Deterministic simulations are nevertheless too poor to represent the whole physical of the track/vehicle system which contains several sources of variability: variability of the mechanical parameters of a train among a class of vehicles (mass, stiffness and damping of different suspensions), variability of the contact parameters (friction coefficient, wheel and rail profiles) and variability of the track design and quality. This variability plays an important role on the safety, on the ride quality, and thus on the certification criteria. When using the simulation for certification purposes, it seems therefore crucial to take into account the variability of the different inputs. The main goal of this article is thus to propose a method to introduce the variability in railway dynamics. A four-step method is described namely the definition of the stochastic problem, the modelling of the inputs variability, the propagation and the analysis of the output. Each step is illustrated with railway examples.

[Sanitary epidemiologic safety and technical regulations on railway transport].

PubMed

Leksin, A G

2009-01-01

The author necessitated that requirements on sanitary and epidemiologic safety of life support systems for engine driver cabin (microclimate maintainance system, protection from vibration and noise, illumination, workplace ergonomics, etc) should be included into technical regulations for railway vehicles, both newly constructed and modernized.

Energy situations in Japan before and after the Fukushima nuclear accident

NASA Astrophysics Data System (ADS)

Muraoka, K.

2015-08-01

This article describes the various effects on the public conception on nuclear energy and more generally on energy policies in Japan due to the nuclear accident that occurred on 11th March 2011 at the Fukushima Dai-ichi nuclear power station, which is owned and operated by Tokyo Electric Power Company (TEPCO). Before the accident, nuclear energy had been conceived as the main energy source of electricity in Japan for reducing CO2 emission beyond 2020. However, public opinion has turned almost completely against nuclear energy after observing how vulnerable the nuclear system had been. The present Japanese government is now trying to buy time before taking a decision. After explaining these circumstances, the author tries to chart his personal projection of energy sources for Japan to 2050.

Multi-camera and structured-light vision system (MSVS) for dynamic high-accuracy 3D measurements of railway tunnels.

PubMed

Zhan, Dong; Yu, Long; Xiao, Jian; Chen, Tanglong

2015-04-14

Railway tunnel 3D clearance inspection is critical to guaranteeing railway operation safety. However, it is a challenge to inspect railway tunnel 3D clearance using a vision system, because both the spatial range and field of view (FOV) of such measurements are quite large. This paper summarizes our work on dynamic railway tunnel 3D clearance inspection based on a multi-camera and structured-light vision system (MSVS). First, the configuration of the MSVS is described. Then, the global calibration for the MSVS is discussed in detail. The onboard vision system is mounted on a dedicated vehicle and is expected to suffer from multiple degrees of freedom vibrations brought about by the running vehicle. Any small vibration can result in substantial measurement errors. In order to overcome this problem, a vehicle motion deviation rectifying method is investigated. Experiments using the vision inspection system are conducted with satisfactory online measurement results.

Electrical injuries due to railway high tension cables.

PubMed

Reichl, M; Kay, S

1985-08-01

We have noted a large number of young boys being admitted to our Unit with burns due to railway high tension cables. On review of these cases we have noted: most of the burns were due to arcing, there is a high level of ignorance among the population at risk. We propose some ways of preventing these injuries.

Railway Transportation Engineering (CEE 408) Course updates and online conversion.

DOT National Transportation Integrated Search

2017-01-20

The new order of lectures provides students with a sound introduction to the main concepts behind efficiency and economic railway operations. This naturally follows into the design of railcars for safe, efficient and economical operations. With railc...

Education and Training in Japan and the United States: An Assessment.

ERIC Educational Resources Information Center

Burnell, Jerrold

This paper is divided into three main sections. The first part focuses attention on an examination of Japanese training techniques and analyzes issues relating to the internationalization of Japanese institutions and the reverse movement of American institutions to Japan. Companies from both countries are compared, and differences in approach and…

75 FR 63533 - Gulf & Ohio Railways Holding Co., Inc., H. Peter Claussen and Linda C. Claussen-Continuance in...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-15

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35414] Gulf & Ohio Railways Holding Co., Inc., H. Peter Claussen and Linda C. Claussen--Continuance in Control Exemption--Lancaster & Chester Railroad, LLC Gulf & Ohio Railways Holding Co., Inc. (G&O), H. Peter Claussen and Linda...

Development of a railway wagon-track interaction model: Case studies on excited tracks

NASA Astrophysics Data System (ADS)

Xu, Lei; Chen, Xianmai; Li, Xuwei; He, Xianglin

2018-02-01

In this paper, a theoretical framework for modeling the railway wagon-ballast track interactions is presented, in which the dynamic equations of motion of wagon-track systems are constructed by effectively coupling the linear and nonlinear dynamic characteristics of system components. For the linear components, the energy-variational principle is directly used to derive their dynamic matrices, while for the nonlinear components, the dynamic equilibrium method is implemented to deduce the load vectors, based on which a novel railway wagon-ballast track interaction model is developed, and being validated by comparing with the experimental data measured from a heavy haul railway and another advanced model. With this study, extensive contributions in figuring out the critical speed of instability, limits and localizations of track irregularities over derailment accidents are presented by effectively integrating the dynamic simulation model, the track irregularity probabilistic model and time-frequency analysis method. The proposed approaches can provide crucial information to guarantee the running safety and stability of the wagon-track system when considering track geometries and various running speeds.

Trespassing on the tracks: a review of railway pedestrian safety research.

PubMed

Lobb, Brenda

2006-01-01

Train-pedestrian collisions have been shown to be the leading cause of fatality in train-related accidents worldwide, yet there is remarkably little research in this area. In this paper, the major types of railway transportation accident research are briefly highlighted to indicate the general context of research concerning train-pedestrian collisions, which are then reviewed. Themes emerging from the diverse research are identified, the various strategies that have been proposed for prevention of railway pedestrian accidents are discussed, and the empirical evidence for their efficacy examined in the light of the much more extensive literature on road pedestrian accidents. Finally, it is proposed that application of current theory in behavioral and cognitive psychology may usefully inform future research in transportation safety.

76 FR 55471 - Pittsburgh & West Virginia Railroad-Abandonment Exemption-in Allegheny County, PA; Wheeling...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-07

... Pittsburgh & West Virginia Railroad (PWV) and Wheeling & Lake Erie Railway Company (WLE) (collectively... Abandonments and Discontinuances of Service for PWV to abandon, and for WLE to discontinue its sublease rights... Service Zip Code 15220. Currently, PWV leases the line to Norfolk Southern Railway Company (NSR), which in...

20 CFR 204.7 - Employment relation-service to a local lodge or division of a railway labor organization.

Code of Federal Regulations, 2010 CFR

2010-04-01

... or division of a railway labor organization. 204.7 Section 204.7 Employees' Benefits RAILROAD RETIREMENT BOARD REGULATIONS UNDER THE RAILROAD RETIREMENT ACT EMPLOYMENT RELATION § 204.7 Employment relation—service to a local lodge or division of a railway labor organization. Service by an individual to...

75 FR 74768 - Madison Terminal Railway, LLC-Lease and Operation Exemption-Line of Railroad in Dane County, WI

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-01

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35433] Madison Terminal Railway, LLC--Lease and Operation Exemption-- Line of Railroad in Dane County, WI Madison Terminal Railway... Industrial Lead at milepost 78.02 in Madison, WI, and is located entirely within the property of ProBuild...

COST-BENEFIT Analysis in Railway Noise Control

NASA Astrophysics Data System (ADS)

OERTLI, J.

2000-03-01

A method to calculate the network-wide costs of realizing different noise control possibilities and their benefits in terms of noise reduction for lineside inhabitants has been implemented in Switzerland. These studies have shown that an optimal cost distribution consists of spending 65% of the available finances on rolling stock improvement, 30% on noise control barriers and 5% on insulated windows. This mix protects 70% of the lineside population for 30% of the cost necessary to attain threshold levels for all inhabitants. This noise control strategy has been accepted by the federal traffic and environment agencies involved and will save billions of Swiss francs. The success of the calculation methodology has prompted development of a Europe-wide decision support system to the same effect. Along two freight freeways the relationship between rolling stock improvement, noise barriers, insulated windows, operational measures and track characteristics is being studied. The decision support system will allow determination of those combinations with the best cost-benefit ratios. The study is currently being undertaken as a joint venture by the railways of Switzerland, France, Germany and the Netherlands as well as the European Rail Research Institute. The results constitute part of the negotiating strategy of the railways with European and national legislators.

Using Fuzzy Multiple Criteria Decision-Making Approach for Assessing the Risk of Railway Reconstruction Project in Taiwan

PubMed Central

Yu, Shih-Heng; Chang, Dong-Shang

2014-01-01

This study investigates the risk factors in railway reconstruction project through complete literature reviews on construction project risks and scrutinizing experiences and challenges of railway reconstructions in Taiwan. Based on the identified risk factors, an assessing framework based on the fuzzy multicriteria decision-making (fuzzy MCDM) approach to help construction agencies build awareness of the critical risk factors on the execution of railway reconstruction project, measure the impact and occurrence likelihood for these risk factors. Subjectivity, uncertainty and vagueness within the assessment process are dealt with using linguistic variables parameterized by trapezoid fuzzy numbers. By multiplying the degree of impact and the occurrence likelihood of risk factors, estimated severity values of each identified risk factor are determined. Based on the assessment results, the construction agencies were informed of what risks should be noticed and what they should do to avoid the risks. That is, it enables construction agencies of railway reconstruction to plan the appropriate risk responses/strategies to increase the opportunity of project success and effectiveness. PMID:24772014

To Globalise or Not to Globalise? "Inward-Looking Youth" as Scapegoats for Japan's Failure to Secure and Cultivate "Global Human Resources"

ERIC Educational Resources Information Center

Burgess, Chris

2015-01-01

In Japan in recent years, there has been much discussion of the need for global human resources alongside criticism of Japanese youth as having an "inward-looking" ("uchimuki") orientation. Drawing out the contradictions apparent in a youth apparently reluctant to leave Japan and companies, universities and government seemingly…

Hydrologic Analysis of Ungauged Catchments For The Supply of Water For Irrigation On Railway Embankment Batters

NASA Astrophysics Data System (ADS)

Gyasi-Agyei, Y.; Nissen, D.

Water has been identified as a key component to the success of grass establishment on railway embankment batters (side slope) within Central Queensland, Australia, to control erosion. However, the region under study being semi-arid experiences less than 600 mm average annual rainfall occurring on about 60 days of the year. Culverts and bridges are integral part of railway embankments. They are used to cross water courses, be it an ephemeral creek or just a surface runoff path. Surface runoff through an ungauged railway embankment culvert is diverted to a temporary excavated pond located at the downstream side of the hydraulic structure. The temporary excavated pond water is used to feed an automated drip irrigation system, with solar as a source of energy to drive a pump. Railway embankment batter erosion remediation is timed in the wet season when irrigation is used to supplement natural rainfall. Hydrologic analysis of ungauged catchments for sizing the temporary excavated pond is presented. It is based on scenarios of runoff coefficient and curve number, and mass curve (Rippl diagram). Three years of continuous rainfall data (1997/1998 -1999/2000) were used to design a pond. The performance of the designed pond was evaluated in a field experiment during the next wet season (2000/2001). It supplied adequate water for irrigation as predicted by the hydrologic analysis during the grass establishment. This helped to achieve 100% grass cover on the railway embankment batter within 12 weeks. The proposed irrigation system has been demonstrated t o be feasible and cost effective.

Living alongside railway tracks: Long-term effects of nocturnal noise on sleep and cardiovascular reactivity as a function of age.

PubMed

Tassi, Patricia; Rohmer, Odile; Schimchowitsch, Sarah; Eschenlauer, Arnaud; Bonnefond, Anne; Margiocchi, Florence; Poisson, Franck; Muzet, Alain

2010-10-01

Very few studies were devoted to permanent effects of nocturnal railway noise on sleep and cardiovascular reactivity. We investigated the effects of nocturnal railway noise on sleep and cardiovascular response in young and middle-aged adults living for many years either near a railway track or in a quiet area. Forty subjects (50% males) divided into two age groups (juniors: 26.2+/-3.6 and seniors: 56.2+/-4.2) participated in this experiment. Half of them lived near a railway track (RW group: 2.6 to 19 years) and the other half in a quiet environment (QE group: 8.1 to 14.2 years). After an adaptation night, all subjects underwent two nights in the laboratory: one control night and one noisy night (30 by-passes of a freight train). Sleep and cardiovascular modifications were assessed in response to noise. Sleep fragmentation indices were lower in RW subjects compared to QE whatever their age. In response to noise, there was a higher cardiovascular response rate to noise in RW juniors and a lower cardiovascular response rate in RW seniors compared to their age-paired QE counterparts. In conclusion, permanent exposure to nocturnal railway noise leads to decreased sleep fragmentation and to cardiovascular habituation. It is suggested that during the initial period experienced by residents living near railway tracks, nocturnal railway noise could induce a sensitization process on the autonomic response to noise reflecting a startle/defense reflex due to its functional significance, which progressively turns to habituation in the long-term if no adverse effect is experienced. Copyright 2010 Elsevier Ltd. All rights reserved.

NDT of railway components using induction thermography

NASA Astrophysics Data System (ADS)

Netzelmann, U.; Walle, G.; Ehlen, A.; Lugin, S.; Finckbohner, M.; Bessert, S.

2016-02-01

Induction or eddy current thermography is used to detect surface cracks in ferritic steel. The technique is applied to detect surface cracks in rails from a moving test car. Cracks were detected at a train speed between 2 and 15 km/h. An automated demonstrator system for testing railway wheels after production is described. While the wheel is rotated, a robot guides the detection unit consisting of inductor and infrared camera over the surface.

Analysis and forecast of railway coal transportation volume based on BP neural network combined forecasting model

NASA Astrophysics Data System (ADS)

Xu, Yongbin; Xie, Haihong; Wu, Liuyi

2018-05-01

The share of coal transportation in the total railway freight volume is about 50%. As is widely acknowledged, coal industry is vulnerable to the economic situation and national policies. Coal transportation volume fluctuates significantly under the new economic normal. Grasp the overall development trend of railway coal transportation market, have important reference and guidance significance to the railway and coal industry decision-making. By analyzing the economic indicators and policy implications, this paper expounds the trend of the coal transportation volume, and further combines the economic indicators with the high correlation with the coal transportation volume with the traditional traffic prediction model to establish a combined forecasting model based on the back propagation neural network. The error of the prediction results is tested, which proves that the method has higher accuracy and has practical application.

Spatial mismatch analysis among hotspots of alien plant species, road and railway networks in Germany and Austria

PubMed Central

Morelli, Federico

2017-01-01

Road and railway networks are pervasive elements of all environments, which have expanded intensively over the last century in all European countries. These transportation infrastructures have major impacts on the surrounding landscape, representing a threat to biodiversity. Roadsides and railways may function as corridors for dispersal of alien species in fragmented landscapes. However, only few studies have explored the spread of invasive species in relationship to transport network at large spatial scales. We performed a spatial mismatch analysis, based on a spatially explicit correlation test, to investigate whether alien plant species hotspots in Germany and Austria correspond to areas of high density of roads and railways. We tested this independently of the effects of dominant environments in each spatial unit, in order to focus just on the correlation between occurrence of alien species and density of linear transportation infrastructures. We found a significant spatial association between alien plant species hotspots distribution and roads and railways density in both countries. As expected, anthropogenic landscapes, such as urban areas, harbored more alien plant species, followed by water bodies. However, our findings suggested that the distribution of neobiota is strongest correlated to road/railways density than to land use composition. This study provides new evidence, from a transnational scale, that alien plants can use roadsides and rail networks as colonization corridors. Furthermore, our approach contributes to the understanding on alien plant species distribution at large spatial scale by the combination with spatial modeling procedures. PMID:28829818

A preliminary survey on mode choice and its effect in users’ satisfaction on their journey to the railway station

NASA Astrophysics Data System (ADS)

Ali, Nur Fahriza Mohd; Sadullah, Ahmad Farhan Mohd; Zulkiple, Adnan

2018-04-01

This paper focuses on two lines of investigation with regard to mode choice to Klang Komuter Station. Firstly, the profile of the access modes on journeys to the railway station is analysed. Secondly, the relationship of users’ mode choice towards overall perception on traveling from home to the railway station is estimated. The data collection was conducted via Revealed Preferences / Stated Preferences (RP/SP) Survey. Meanwhile, the analysis that was implemented in this study was correspondence analysis. This paper discussed more on journey purposes and the effects of distances from home to the railway, users’ trip purposes and travel time between car and bus that was found to have an important effect on the users’ mode choice and their satisfaction on their journey to the railway station. The results show that users were more satisfied to reach the station by car instead of the bus.

The Prevalence of Notched Audiograms in a Cross-Sectional Study of 12,055 Railway Workers

PubMed Central

Skogstad, Marit; Johnsen, Torstein Seip; Engdahl, Bo; Tambs, Kristian

2015-01-01

Objective: Noise-induced hearing loss (NIHL) is one of the most reported occupational diseases internationally. The occurrence of audiometric notches is emphasized in both American and European guidelines for the diagnosis of NIHL. The aim of this study was to describe the prevalence of notched audiograms among railway personnel with and without noise exposure to better assess the usefulness of such notches in the diagnosis of NIHL. Design: The most recent audiogram from 1994 to 2011 of a total of 12,055 railway workers, age 20 to 65 years, was obtained from the medical records of the occupational health service of the Norwegian State Railways (NSB). The prevalences of three types of notched audiograms, Coles notch, notch index, and 4 kHz notch, were computed, in relation to age, sex, and occupational noise exposure. Results: Coles notch in either ear was found in 63% of the male railway maintenance workers, exposed to noise levels of 75 to 90 dB(A), compared with 53% of the non-noise exposed (<70 dB(A)) traffic controllers (p < 0.001). The corresponding figures for the 4 kHz notch were 31% versus 21% (p < 0.001). For the notch index, 61% of the exposed and 51% of the controls had a notched audiogram (p < 0.001). For female workers, the prevalence of audiometric notches was lower, and the differences between noise exposed and nonexposed was smaller than those in men. Increasing age led to an increased prevalence of notches. Conclusions: Audiometric notches commonly occur among both noise-exposed and those not exposed to noise in railway personnel. The usefulness of audiometric notches in the diagnosis of NIHL is therefore limited. PMID:25470371

View of skylight from mezzanine of American Railway Express Building ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View of skylight from mezzanine of American Railway Express Building to interior light well on second floor. Skylight lights interior hallway leading to mezzanine rooms - Southern Pacific Railroad Depot, Railroad Terminal Post Office & Express Building, Fifth & I Streets, Sacramento, Sacramento County, CA

Design of noise barrier inspection system for high-speed railway

NASA Astrophysics Data System (ADS)

Liu, Bingqian; Shao, Shuangyun; Feng, Qibo; Ma, Le; Cholryong, Kim

2016-10-01

The damage of noise barriers will highly reduce the transportation safety of the high-speed railway. In this paper, an online inspection system of noise barrier based on laser vision for the safety of high-speed railway is proposed. The inspection system, mainly consisted of a fast camera and a line laser, installed in the first carriage of the high-speed CIT(Composited Inspection Train).A Laser line was projected on the surface of the noise barriers and the images of the light line were received by the camera while the train is running at high speed. The distance between the inspection system and the noise barrier can be obtained based on laser triangulation principle. The results of field tests show that the proposed system can meet the need of high speed and high accuracy to get the contour distortion of the noise barriers.

Japan.

PubMed

1987-02-01

Japan is composed of 4 main islands and more than 3900 smaller islands and has 317.7 persons/square kilometer. This makes it one of the most densely populated nations in the world. Religion is an important force in the life of the Japanese and most consider themselves Buddhists. Schooling is free through junior high but 90% of Japanese students complete high school. In fact, Japan enjoys one of the highest literacy rates in the world. There are over 178 newspapers and 3500 magazines published in Japan and the number of new book titles issued each year is greater than that in the US. Since WW1, Japan expanded its influence in Asia and its holdings in the Pacific. However, as a direct result of WW2, Japan lost all of its overseas possessions and was able to retain only its own islands. Since 1952, Japan has been ruled by conservative governments which cooperate closely with the West. Great economic growth has come since the post-treaty period. Japan as a constitutional monarchy operates within the framework of a constitution which became effective in May 1947. Executive power is vested in a cabinet which includes the prime minister and the ministers of state. Japan is one of the most politically stable of the postwar democracies and the Liberal Democratic Party is representative of Japanese moderate conservatism. The economy of Japan is strong and growing. With few resources, there is only 19% of Japanese land suitable for cultivation. Its exports earn only about 19% of the country's gross national product. More than 59 million workers comprise Japan's labor force, 40% of whom are women. Japan and the US are strongly linked trading partners and after Canada, Japan is the largest trading partner of the US. Foreign policy since 1952 has fostered close cooperation with the West and Japan is vitally interested in good relations with its neighbors. Relations with the Soviet Union are not close although Japan is attempting to improve the situation. US policy is based on

Noise annoyance through railway traffic - a case study

PubMed Central

2014-01-01

This paper describes an assessment of noise caused by railway traffic in a large Latin American city. Measurements were taken of noise levels generated by trains passing through residential neighborhoods with and without blowing their horns. Noise maps were also calculated showing noise pollution generated by the train traffic. In addition - annoyance of the residents - affected by railway noise, was evaluated based on interviews. The measurements indicated that the noise levels generated by the passage of the train with its horn blowing are extremely high, clearly exceeding the daytime limits of equivalent sound pressure level - Leq = 55 dB(A) - established by the municipal laws No 10.625 of the city of Curitiba. The Leq = 45 dB (A) which is the limit for the night period also are exceeded during the passage of trains. The residents reported feeling affected by the noise generated by passing trains, which causes irritability, headaches, poor concentration and insomnia, and 88% of them claimed that nocturnal noise pollution is the most distressing. This study showed that the vast majority of residents surveyed, (69%) believe that the noise of the train can devalue their property. PMID:24401735

Noise annoyance through railway traffic - a case study.

PubMed

Trombetta Zannin, Paulo Henrique; Bunn, Fernando

2014-01-08

This paper describes an assessment of noise caused by railway traffic in a large Latin American city. Measurements were taken of noise levels generated by trains passing through residential neighborhoods with and without blowing their horns. Noise maps were also calculated showing noise pollution generated by the train traffic. In addition - annoyance of the residents - affected by railway noise, was evaluated based on interviews. The measurements indicated that the noise levels generated by the passage of the train with its horn blowing are extremely high, clearly exceeding the daytime limits of equivalent sound pressure level - Leq = 55 dB(A) - established by the municipal laws No 10.625 of the city of Curitiba. The Leq = 45 dB (A) which is the limit for the night period also are exceeded during the passage of trains. The residents reported feeling affected by the noise generated by passing trains, which causes irritability, headaches, poor concentration and insomnia, and 88% of them claimed that nocturnal noise pollution is the most distressing. This study showed that the vast majority of residents surveyed, (69%) believe that the noise of the train can devalue their property.

Incidence and outcome of out-of-hospital cardiac arrest with public-access defibrillation. A descriptive epidemiological study in a large urban community.

PubMed

Sasaki, Mie; Iwami, Taku; Kitamura, Tetsuhisa; Nomoto, Shinichi; Nishiyama, Chika; Sakai, Tomohiko; Tanigawa, Kayo; Kajino, Kentaro; Irisawa, Taro; Nishiuchi, Tatsuya; Hayashida, Sumito; Hiraide, Atsushi; Kawamura, Takashi

2011-01-01

Detailed characteristics of those who experience an out-of-hospital cardiac arrest (OHCA) with public-access defibrillation (PAD) are unknown. A prospective, population-based observational study involving consecutive OHCA patients with emergency responder resuscitation attempts was conducted from July 1, 2004 through December 31, 2008 in Osaka City. We extracted data for OHCA patients shocked by a public-access automated external defibrillator (AED) and evaluated the patients' and rescuers' characteristics. The main outcome measure was neurologically favorable 1-month survival. During the study period, 10,375 OHCA patients were registered and of 908 patients suffering ventricular fibrillation arrest, 53 (6%) received public-access AED shocks by lay-rescuers, with the proportion increasing from 0% in 2004 to 11% in 2008 (P for trend<0.001). Railway stations (34%) were the places where PAD shocks were most frequently delivered, followed by nursing homes (11%), medical facilities (9%), and fitness facilities (7%). In 57% of cases, the subject received public-access AED shocks delivered by non-medical persons, including employees of railway companies (13%), school teachers (6%), employees of fitness facilities (6%), and security guards (6%). The proportion of neurologically favorable 1-month survival tended to increase from 0% in 2005 to 58% in 2008 (P for trend=0.081). Railway stations are the most common places where shocks by public-access AEDs were delivered in large urban communities of Japan, and among lay-rescuers railway station workers use AEDs more frequently.

77 FR 38713 - V & S Railway, LLC-Discontinuance of Service Exemption-in Pueblo, Crowley and Kiowa Counties, CO

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-28

... exemption is void ab initio. Board decisions and notices are available on our Web site at www.stb.dot.gov... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. AB 603 (Sub-No. 2X)] V & S Railway, LLC--Discontinuance of Service Exemption--in Pueblo, Crowley and Kiowa Counties, CO V & S Railway...

Connecting Indigenous Ainu, University and Local Industry in Japan: The Urespa Project

ERIC Educational Resources Information Center

Maeda, Koji; Okano, Kaori H.

2013-01-01

This paper examines how collaboration amongst university, indigenous community and private sector companies can promote Ainu participation in higher education, drawing on a case study of the Urespa Project in Sapporo University, Japan. In this project, the university offers scholarships to Ainu students, requiring them to take a special course in…

Japan.

PubMed

1989-02-01

Japan consists of 3900 islands and lies off the east coast of Asia. Even though Japan is one of the most densely populated nations in the world, its growth rate has stabilized at .5%. 94% of all children go to senior high school and almost 90% finish. Responsibility for the sick, aged, and infirmed is changing from the family and private sector to government. Japan was founded in 600 BC and its 1st capital was in Nara (710-1867). The Portuguese, the 1st Westerners to make contact with Japan in 1542, opened trade which lasted until the mid 17th century. US Navy Commodore Matthew Perry forced Japan to reopen in 1854. Following wars with China and Russia in the late 1800s and early 1900s respectively, Japan took part in World Wars I and II. In between these wars Japan invaded Manchuria and China. The US dropped an atomic bomb on Hiroshima and Nagasaki and the Japanese surrendered in September, 1945 ending World War II (WWII). Following, WWII, the Allied Powers guided Japan's establishment as a nonthreatening nation and a democratic parliamentary government (a constitutional monarchy) with a limited defense force. Japan remains one of the most politically stable of all postwar democracies. The Liberal Democratic Party's Noboru Takeshita became prime minister in 1987. Japan has limited natural resources and only 19% of the land is arable. Japanese ingenuity and skill combine to produce one of the highest per hectare crop yields in the world. Japan is a major economic power, and its and the US economies are becoming more interdependent. Its exports, making up only 13% of the gross national product, mainly go to Canada and the US. Many in the US are concerned, however, with the trade deficit with Japan and are seeking ways to make trade more equitable. Japan wishes to maintain good relations with its Asian neighbors and other nations. The US and Japan enjoy a strong, productive relationship.

Mind your "smoking manners": the tobacco industry tactics to normalize smoking in Japan.

PubMed

Kashiwabara, Mina; Armada, Francisco

2013-11-09

The tobacco industry has adapted its promotional strategies as tobacco-control measures have increased. This paper describes the tobacco industry's strategies on smoking manners and illustrates how these interfere with tobacco-control policy in Japan where tobacco control remains weak. Information on the tobacco industry's promotional strategies in Japan was collected through direct observation, a review of tobacco industry documents and a literature review. The limitation of the study would be a lack of industry documents from Japan as we relied on a database of a U.S. institution to collect internal documents from the tobacco industry. Japan Tobacco began using the manners strategies in the early 1960s. Collaborating with wide range of actors -including local governments and companies- the tobacco industry has promoted smoking manners to wider audiences through its advertising and corporate social responsibility activities. The tobacco industry in Japan has taken advantage of the cultural value placed on manners in Japan to increase the social acceptability of smoking, eventually aiming to diminish public support for smoke-free policies that threatens the industry's business. A stronger enforcement of the WHO Framework Convention on Tobacco Control is critical to counteracting such strategies.

Wired for success: A history of the Butte, Anaconda & Pacific Railway, 1892--1985

NASA Astrophysics Data System (ADS)

Mutschler, Charles Vincent

The Butte, Anaconda & Pacific Railway (BA&P) was a standard gauge common carrier short line railroad within the state of Montana. A subsidiary of the Anaconda Copper Mining Company, the BA&P was built to carry ore from mines at Butte, Montana to Anaconda, twenty-six miles away, for concentrating and smelting. Other freight and passenger business was of secondary importance. In 1912, when General Electric contracted to convert the BA&P from steam to electric operation, the short line became a proving ground for main line railroad electrification, and the center of attention from advocates for electric power. Electric operation was demonstrated to be mechanically superior to the use of steam locomotives on the BA&P. Immediately after the BA&P proved the technological feasibility of high voltage direct current for moving heavy freight trains, the Chicago Milwaukee & St. Paul (CM&St.P) electrified over 600 miles of transcontinental main line using the basic technology demonstrated on the BA&P. However, on long distances of track with relatively few trains such as the CM&St.P, the capital cost of the electric distribution system exceeded the operational savings obtained by use of electric locomotives. Steam locomotives remained the primary form of railroad motive power in the United States until the 1950's, when the diesel-electric locomotive combined the mechanical efficiency of electric motors with an on-board diesel generating plant, eliminating the need for expensive electric power supply and distribution wires of conventional electrics. The BA&P purchased three diesels in the early 1950's, but relied primarily on its electric locomotives until 1967, when diesel operation became less costly than continued use of electric motive power. The BA&P offers a microcosmic view of the transformation of one industry in response to technological and economic forces as the United States moved from reliance on coal-burning steam power to electric power and internal combustion

The effects of long-term exposure to railway and road traffic noise on subjective sleep disturbance.

PubMed

Hong, Jiyoung; Kim, Jaehwan; Lim, Changwoo; Kim, Kyutae; Lee, Soogab

2010-11-01

The exposure-response relationships between subjective annoyance with sleep disturbance from railway trains and road traffic noise were established from an extensive social survey by CENVR (Center for Environmental Noise and Vibration Research) in Korea. The objectives of this research are to determine the long-term effects of noise on sleep and to compare the exposure-response relationships from different noise sources with those from other studies and to elucidate the effects of some modifying factors on subjective responses to noise. From an investigation of the percentage of a highly sleep-disturbed population (%HSD) in response to railway and road traffic noise, it was found that sleep is affected more by railway noise than by road traffic noise. The effects of non-acoustical factors on the responses were examined and sensitivity was shown to be a significant modifying factor, as it pertains to subjective sleep disturbance. A comparison of the response curves from an analysis of pooled data from predominantly European surveys by Miedema and Vos [Behav. Sleep Med. 5, 1-20 (2007)] with the response curves from this survey showed more of a subjective sleep disturbance response in this survey to railway noise, whereas there was no significant difference in terms of a response to road traffic noise.

Identification of characteristic frequencies of damaged railway tracks using field hammer test measurements

NASA Astrophysics Data System (ADS)

Oregui, M.; Li, Z.; Dollevoet, R.

2015-03-01

In this paper, the feasibility of the Frequency Response Function (FRF)-based statistical method to identify the characteristic frequencies of railway track defects is studied. The method compares a damaged track state to a healthy state based on non-destructive field hammer test measurements. First, a study is carried out to investigate the repeatability of hammer tests in railway tracks. By changing the excitation and measurement locations it is shown that the variability introduced by the test process is negligible. Second, following the concepts of control charts employed in process monitoring, a method to define an approximate healthy state is introduced by using hammer test measurements at locations without visual damage. Then, the feasibility study includes an investigation into squats (i.e. a major type of rail surface defect) of varying severity. The identified frequency ranges related to squats agree with those found in an extensively validated vehicle-borne detection system. Therefore, the FRF-based statistical method in combination with the non-destructive hammer test measurements has the potential to be employed to identify the characteristic frequencies of damaged conditions in railway tracks in the frequency range of 300-3000 Hz.

Long-term exposure to residential railway and road traffic noise and risk for diabetes in a Danish cohort.

PubMed

Roswall, Nina; Raaschou-Nielsen, Ole; Jensen, Steen Solvang; Tjønneland, Anne; Sørensen, Mette

2018-01-01

Road traffic noise exposure has been found associated with diabetes incidence. Evidence for an association between railway noise exposure is less clear, as large studies with detailed railway noise modelling are lacking. To investigate the association between residential railway noise and diabetes incidence, and to repeat previous analyses on road traffic noise and diabetes with longer follow-up time. Among 50,534 middle-aged Danes enrolled into the Diet, Cancer and Health cohort from 1993 to 97, we identified 5062 cases of incident diabetes during a median follow-up of 15.5 years. Present and historical residential addresses from 1987 to 2012 were found in national registries, and railway and road traffic noise (L den ) were modelled for all addresses, using the Nordic prediction method. We used Cox proportional hazard models to investigate the association between residential traffic noise over 1 and 5 years before diagnosis, and diabetes incidence. Hazard ratios (HRs) were calculated as crude and adjusted for potential confounders. We found no association between railway noise exposure and diabetes incidence among the 9527 persons exposed, regardless of exposure time-window: HR 0.99 (0.94-1.04) per 10dB for 5-year exposure in fully adjusted models. There was no effect modification by sex, road traffic noise, and education. We confirmed the previously found association between road traffic noise exposure and diabetes including 6 additional years of follow-up: HR 1.08 (1.04-1.13) per 10dB for 5-year exposure in fully adjusted models. The study does not suggest an association between residential railway noise exposure and diabetes incidence, but supports the finding of a direct association with residential road traffic noise. Copyright © 2017 Elsevier Inc. All rights reserved.

External insulation of electrified railway and energy saving analysis

NASA Astrophysics Data System (ADS)

Dun, Xiaohong

2018-04-01

Through the analysis of the formation process of insulator surface fouling and the cause of fouling of the insulator, the electrified railway was explored to utilize the coating material on the surface of the insulator to achieve the effect of flashover prevention. At the same time the purpose of energy conservation can be achieved.

The Concept of Limitation of the Vibration Generated by Rail-Vehicles at Railway Stations and Railway Crossings

NASA Astrophysics Data System (ADS)

Adamczyk, Jan; Targosz, Jan

2011-03-01

One of the possibilities of limitation of effects of dynamic influence of the rail-vehicles is the application of the complex objects of vibroinsulation when the mass of the vibroinsulating element is significant, and that is the case of the transporting machines and devices, when the geometric dimensions of the elements of vibroinsulation system are similar to the slab, where the process of modelling of the vibroinsulation mechanism as a discrete system, creates extreme hazards. The article presents the concept of limitation of effects of dynamic influence of the rail-vehicles and tram-vehicles, mainly in the railway tracks located at the railway stations, tram-stops and other engineering structures. The digital model was developed for simulation regarding the propagation of the vibration to the environment. The results of simulation were the basis for development of the vibroinsulation system for the rail-tracks located at the engineering structures such as railway stations, viaducts. The second part of the article presents the approach for controlling of the tension as a function of load of the railway crossing, which was modelled as discrete-continous model. The continuous systems consist of two elements, that is of the support made of elastomer and of the tension members with controlled tension depending on the crossing load. Together with development and more popular application of tension member systems in engineering structures, among others in vibroinsulation systems, it is important to include into calculations and experiments the dynamic loads of the tension member with the mass attached to it. In case of complex objects of vibroinsulation when the mass of the vibroinsulator is significant, and that is the case of the transporting machines and devices, when the geometric dimensions of the elements of vibroinsulation system are similar to the slab, where the process of modelling of the vibroinsulation mechanism as a discrete system, creates extreme

Fundamental Study on Saving Energy for Electrified Railway System Applying High Temperature Superconductor Motor and Energy Storage System

NASA Astrophysics Data System (ADS)

Konishi, Takeshi; Nakamura, Taketsune; Amemiya, Naoyuki

Induction motor instead of dc one has been applied widely for dc electric rolling stock because of the advantage of its utility and efficiency. However, further improvement of motor characteristics will be required to realize environment-friendly dc railway system in the future. It is important to study more efficient machine applying dc electric rolling stock for next generation high performance system. On the other hand, the methods to reuse regenerative energy produced by motors effectively are also important. Therefore, we carried out fundamental study on saving energy for electrified railway system. For the first step, we introduced the energy storage system applying electric double-layer capacitors (EDLC), and its control system. And then, we tried to obtain the specification of high temperature superconductor induction/synchronous motor (HTS-ISM), which performance is similar with that of the conventional induction motors. Furthermore, we tried to evaluate an electrified railway system applying energy storage system and HTS-ISM based on simulation. We succeeded in showing the effectiveness of the introductions of energy storage system and HTS-ISM in DC electrified railway system.

Anti-Runaway Prevention System with Wireless Sensors for Intelligent Track Skates at Railway Stations.

PubMed

Jiang, Chaozhe; Xu, Yibo; Wen, Chao; Chen, Dilin

2017-12-19

Anti-runaway prevention of rolling stocks at a railway station is essential in railway safety management. The traditional track skates for anti-runaway prevention of rolling stocks have some disadvantages since they are operated and monitored completely manually. This paper describes an anti-runaway prevention system (ARPS) based on intelligent track skates equipped with sensors and real-time monitoring and management system. This system, which has been updated from the traditional track skates, comprises four parts: intelligent track skates, a signal reader, a database station, and a monitoring system. This system can monitor the real-time situation of track skates without changing their workflow for anti-runaway prevention, and thus realize the integration of anti-runaway prevention information management. This system was successfully tested and practiced at Sunjia station in Harbin Railway Bureau in 2014, and the results confirmed that the system showed 100% accuracy in reflecting the usage status of the track skates. The system could meet practical demands, as it is highly reliable and supports long-distance communication.

Anti-Runaway Prevention System with Wireless Sensors for Intelligent Track Skates at Railway Stations

PubMed Central

Jiang, Chaozhe; Xu, Yibo; Chen, Dilin

2017-01-01

Anti-runaway prevention of rolling stocks at a railway station is essential in railway safety management. The traditional track skates for anti-runaway prevention of rolling stocks have some disadvantages since they are operated and monitored completely manually. This paper describes an anti-runaway prevention system (ARPS) based on intelligent track skates equipped with sensors and real-time monitoring and management system. This system, which has been updated from the traditional track skates, comprises four parts: intelligent track skates, a signal reader, a database station, and a monitoring system. This system can monitor the real-time situation of track skates without changing their workflow for anti-runaway prevention, and thus realize the integration of anti-runaway prevention information management. This system was successfully tested and practiced at Sunjia station in Harbin Railway Bureau in 2014, and the results confirmed that the system showed 100% accuracy in reflecting the usage status of the track skates. The system could meet practical demands, as it is highly reliable and supports long-distance communication. PMID:29257108

Prediction and measurements of vibrations from a railway track lying on a peaty ground

NASA Astrophysics Data System (ADS)

Picoux, B.; Rotinat, R.; Regoin, J. P.; Le Houédec, D.

2003-10-01

This paper introduces a two-dimensional model for the response of the ground surface due to vibrations generated by a railway traffic. A semi-analytical wave propagation model is introduced which is subjected to a set of harmonic moving loads and based on a calculation method of the dynamic stiffness matrix of the ground. In order to model a complete railway system, the effect of a simple track model is taken into account including rails, sleepers and ballast especially designed for the study of low vibration frequencies. The priority has been given to a simple formulation based on the principle of spatial Fourier transforms compatible with good numerical efficiency and yet providing quick solutions. In addition, in situ measurements for a soft soil near a railway track were carried out and will be used to validate the numerical implementation. The numerical and experimental results constitute a significant body of useful data to, on the one hand, characterize the response of the environment of tracks and, on the other hand, appreciate the importance of the speed and weight on the behaviour of the structure.

A Fuzzy-Based Control Method for Smoothing Power Fluctuations in Substations along High-Speed Railways

NASA Astrophysics Data System (ADS)

Sugio, Tetsuya; Yamamoto, Masayoshi; Funabiki, Shigeyuki

The use of an SMES (Superconducting Magnetic Energy Storage) for smoothing power fluctuations in a railway substation has been discussed. This paper proposes a smoothing control method based on fuzzy reasoning for reducing the SMES capacity at substations along high-speed railways. The proposed smoothing control method comprises three countermeasures for reduction of the SMES capacity. The first countermeasure involves modification of rule 1 for smoothing out the fluctuating electric power to its average value. The other countermeasures involve the modification of the central value of the stored energy control in the SMES and revision of the membership function in rule 2 for reduction of the SMES capacity. The SMES capacity in the proposed smoothing control method is reduced by 49.5% when compared to that in the nonrevised control method. It is confirmed by computer simulations that the proposed control method is suitable for smoothing out power fluctuations in substations along high-speed railways and for reducing the SMES capacity.

Industry-University Collaborations in Canada, Japan, the UK and USA – With Emphasis on Publication Freedom and Managing the Intellectual Property Lock-Up Problem

PubMed Central

Kneller, Robert; Mongeon, Marcel; Cope, Jeff; Garner, Cathy; Ternouth, Philip

2014-01-01

As industry-university collaborations are promoted to commercialize university research and foster economic growth, it is important to understand how companies benefit from these collaborations, and to ensure that resulting academic discoveries are developed for the benefit of all stakeholders: companies, universities and public. Lock up of inventions, and censoring of academic publications, should be avoided if feasible. This case-study analysis of interviews with 90 companies in Canada, Japan, the UK and USA assesses the scope of this challenge and suggests possible resolutions. The participating companies were asked to describe an important interaction with universities, and most described collaborative research. The most frequently cited tensions concerned intellectual property management and publication freedom. IP disagreements were most frequent in the context of narrowly-focused collaborations with American universities. However, in the case of exploratory research, companies accepted the IP management practices of US universities. It might make sense to let companies have an automatic exclusive license to IP from narrowly defined collaborations, but to encourage universities to manage inventions from exploratory collaborations to ensure development incentives. Although Canada, the UK and US have strong publication freedom guarantees, tensions over this issue arose frequently in focused collaborations, though were rare in exploratory collaborations. The UK Lambert Agreements give sponsors the option to control publications in return for paying the full economic cost of a project. This may offer a model for the other three countries. Uniquely among the four countries, Japan enables companies to control exclusively most collaborative inventions and to censor academic publications. Despite this high degree of control, the interviews suggest many companies do not develop university discoveries to their full potential. The steps suggested above may rebalance the

'The industry must be inconspicuous': Japan Tobacco's corruption of science and health policy via the Smoking Research Foundation.

PubMed

Iida, Kaori; Proctor, Robert N

2018-02-04

To investigate how and why Japan Tobacco, Inc. (JT) in 1986 established the Smoking Research Foundation (SRF), a research-funding institution, and to explore the extent to which SRF has influenced science and health policy in Japan. We analysed documents in the Truth Tobacco Industry Documents archive, along with recent Japanese litigation documents and published documents. JT's effort to combat effective tobacco control was strengthened in the mid-1980s, following privatisation of the company. While remaining under the protection of Japan's Ministry of Finance, the semiprivatised company lost its 'access to politicos', opening up a perceived need for collaboration with global cigarette makers. One solution, arrived at through clandestine planning with American companies, was to establish a third-party organisation, SRF, with the hope of capturing scientific and medical authority for the industry. Guarded by powerful people in government and academia, SRF was launched with the covert goal of influencing tobacco policy both inside and outside Japan. Scholars funded by SRF have participated in international conferences, national advisory committees and tobacco litigation, in most instances helping the industry to maintain a favourable climate for the continued sale of cigarettes. Contrary to industry claims, SRF was never meant to be independent or neutral. With active support from foreign cigarette manufacturers, SRF represents the expansion into Asia of the denialist campaign that began in the USA in 1953. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Ergonomic Intervention on the Occupational Stress of Selective Railway Workshop's Fitters

NASA Astrophysics Data System (ADS)

Mukhopadhyay, Partha; Dey, Netai Chandra

2017-12-01

In India, progressively rigorous health, safety and environmental regulation, together with rapid technological advances have caused job demands of man machine interface. Any deviations in implementing rules and regulations leave many workers at severe risks. In different railway workshops where periodic overhauling (POH) of different coaches and locomotives are obtained, the exhaustive nature of work results strain within the workers. Unfortunately physiological work studies on railway workers are highly inadequate in India. The present study is aimed to relate the ergonomic intervention on the occupational stress of railway workshop's fitters. Working heart rate (WHR) is measured continuously during their work schedule by portable heart rate monitor. Recovery heart rate and other essential occupational stress indexes are also measured along with total working environmental details. The working heart rate (WHR) of the subjects are found as 138 beats/min (bpm) and 121 bpm for the junior (age < 40 years) and senior fitters (age > 40 years), respectively. Net cardiac cost (NCC) and relative cardiac cost (RCC) values exhibit their range in a non-safe zone. No recovery in resting heart rate denotes the hostile environmental effect on the worker's physiology. The effective temperature (ET) and wet bulb globe temperature (WBGT) of work site cross the recommended value. Clear evidences of a direct relationship between occupational hazard and fatigue is found and it can be considered as an environmental stresses which, in conjunction with other environmental and host factors induced a chronic fatigue that lead to non-specific health disorders.

[Whole-body vibration risk among operators in railway engines shunting ].

PubMed

Abbate, A; Saffioti, G; Malara, G; Licordari, P; Carrello, S; De Pasquale, D; Giorgianni, C

2007-01-01

Purpose of the present note is to assess the risk from Whole-body vibration (WBV) in operators employed in the shunting of engines within the railway stations. The study has been conducted in the cockpits of the shunting engines used within the railway station of Villa S. Giovanni (RC). The measures have been taken through accelerometer IHVM 100 Larson-Davis, placed on the seat of each locomotives for a recording time of around 15 minutes. A standard measure has been effected besides, positioning the sensor on the floor of the same locomotives. The measurements indicate that the risk to these workers is negligible because in any case the value is exceeded action daily 0.5 m/s2, having recorded values range from 0.1 to 0.2 m / s2. In conclusion it holds him necessary, to the preventive goals, in respect to how much anticipated from the D.L.gs 187/05 the necessary technical, organizational and formative measures to the containment of the risk.

Current status of pregnancy-related maternal mortality in Japan: a report from the Maternal Death Exploratory Committee in Japan.

PubMed

Hasegawa, Junichi; Sekizawa, Akihiko; Tanaka, Hiroaki; Katsuragi, Shinji; Osato, Kazuhiro; Murakoshi, Takeshi; Nakata, Masahiko; Nakamura, Masamitsu; Yoshimatsu, Jun; Sadahiro, Tomohito; Kanayama, Naohiro; Ishiwata, Isamu; Kinoshita, Katsuyuki; Ikeda, Tomoaki

2016-03-21

To clarify the problems related to maternal deaths in Japan, including the diseases themselves, causes, treatments and the hospital or regional systems. Descriptive study. Maternal death registration system established by the Japan Association of Obstetricians and Gynecologists (JAOG). Women who died during pregnancy or within a year after delivery, from 2010 to 2014, throughout Japan (N=213). The preventability and problems in each maternal death. Maternal deaths were frequently caused by obstetric haemorrhage (23%), brain disease (16%), amniotic fluid embolism (12%), cardiovascular disease (8%) and pulmonary disease (8%). The Committee considered that it was impossible to prevent death in 51% of the cases, whereas they considered prevention in 26%, 15% and 7% of the cases to be slightly, moderately and highly possible, respectively. It was difficult to prevent maternal deaths due to amniotic fluid embolism and brain disease. In contrast, half of the deaths due to obstetric haemorrhage were considered preventable, because the peak duration between the initial symptoms and initial cardiopulmonary arrest was 1-3 h. A range of measures, including individual education and the construction of good relationships among regional hospitals, should be established in the near future, to improve primary care for patients with maternal haemorrhage and to save the lives of mothers in Japan. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Suppression of AC railway power-line interference in ECG signals recorded by public access defibrillators.

PubMed

Dotsinsky, Ivan

2005-11-26

Public access defibrillators (PADs) are now available for more efficient and rapid treatment of out-of-hospital sudden cardiac arrest. PADs are used normally by untrained people on the streets and in sports centers, airports, and other public areas. Therefore, automated detection of ventricular fibrillation, or its exclusion, is of high importance. A special case exists at railway stations, where electric power-line frequency interference is significant. Many countries, especially in Europe, use 16.7 Hz AC power, which introduces high level frequency-varying interference that may compromise fibrillation detection. Moving signal averaging is often used for 50/60 Hz interference suppression if its effect on the ECG spectrum has little importance (no morphological analysis is performed). This approach may be also applied to the railway situation, if the interference frequency is continuously detected so as to synchronize the analog-to-digital conversion (ADC) for introducing variable inter-sample intervals. A better solution consists of rated ADC, software frequency measuring, internal irregular re-sampling according to the interference frequency, and a moving average over a constant sample number, followed by regular back re-sampling. The proposed method leads to a total railway interference cancellation, together with suppression of inherent noise, while the peak amplitudes of some sharp complexes are reduced. This reduction has negligible effect on accurate fibrillation detection. The method is developed in the MATLAB environment and represents a useful tool for real time railway interference suppression.

Suppression of AC railway power-line interference in ECG signals recorded by public access defibrillators

PubMed Central

Dotsinsky, Ivan

2005-01-01

Background Public access defibrillators (PADs) are now available for more efficient and rapid treatment of out-of-hospital sudden cardiac arrest. PADs are used normally by untrained people on the streets and in sports centers, airports, and other public areas. Therefore, automated detection of ventricular fibrillation, or its exclusion, is of high importance. A special case exists at railway stations, where electric power-line frequency interference is significant. Many countries, especially in Europe, use 16.7 Hz AC power, which introduces high level frequency-varying interference that may compromise fibrillation detection. Method Moving signal averaging is often used for 50/60 Hz interference suppression if its effect on the ECG spectrum has little importance (no morphological analysis is performed). This approach may be also applied to the railway situation, if the interference frequency is continuously detected so as to synchronize the analog-to-digital conversion (ADC) for introducing variable inter-sample intervals. A better solution consists of rated ADC, software frequency measuring, internal irregular re-sampling according to the interference frequency, and a moving average over a constant sample number, followed by regular back re-sampling. Results The proposed method leads to a total railway interference cancellation, together with suppression of inherent noise, while the peak amplitudes of some sharp complexes are reduced. This reduction has negligible effect on accurate fibrillation detection. Conclusion The method is developed in the MATLAB environment and represents a useful tool for real time railway interference suppression. PMID:16309558

[Safety of food additives in Japan].

PubMed

Ito, Sumio

2011-01-01

Recently, many accidents relating to food happened in Japan. The consumer's distrust for food, food companies, and the administration is increasing. The consumer especially has an extreme refusal feeling for chemicals such as food additives and agricultural chemicals, and begins to request agricultural chemical-free vegetables and food additive-free food. Food companies also state no agricultural chemicals and no food additives to correspond with consumers' request and aim at differentiating. The food additive is that the Ministry of Health, Labour and Welfare specifies the one that person's health might not be ruined by providing for Food Sanitation Law Article 10 in our country. The standard for food additives and standard for use of food additives are provided according to regulations of Food Sanitation Law Article 11. Therefore, it is thought that the food additive used is safe now. Then, it reports on the procedure and the safety examination, etc. in our country for designation for food additive this time.

Improvement of railway ballast maintenance approach, incorporating ballast geometry and fouling conditions

NASA Astrophysics Data System (ADS)

Sadeghi, J.; Motieyan-Najar, M. E.; Zakeri, J. A.; Yousefi, B.; Mollazadeh, M.

2018-04-01

Ballast plays an important role in the stability of railway track systems. The effectiveness of the ballast in maintaining the track stability is very much dependent on its mechanical conditions. The available ballast maintenance approaches are mainly based on only track geometry conditions (such as track profile) which do not sufficiently reflect the ballast mechanical behaviors. That is, the ballast potential of degradation (i.e., ballast long term behaviors) has been omitted. This makes the effectiveness of the current ballast maintenance approach questionable, indicating a need for a more comprehensive and effective ballast conditions assessment technique. In response to this need, two ballast condition indices based on ballast geometry degradation (BGI) and the level of ballast fouling (BFI) as the main indicators of ballast mechanical behavior were developed. The BGI is a function of the standard deviations of track alignment, unevenness and twist. The BFI was developed based on the data obtained from the ground penetration radar (GPR). Making use of the new indices, a more reliable maintenance algorithm was developed. Through illustrations of the applicability of the new maintenance algorithm in a railway line, it was shown that the new algorithm causes a considerable improvement in the maintenance effectiveness and an increase in the life cycle of railway tracks by making more effective allocation of resources and more accurate maintenance planning.

Railway transport of low temperature heat from large power stations by means of alternative heat carriers and water

NASA Astrophysics Data System (ADS)

Luchtman, G.; Bracke, T.

1981-11-01

The feasibility of railway transport of liquid and solid heat carriers in tank cars so as to replace pipeline transport of small to medium large heat loads was investigated. The typical characteristics of railway transport were analyzed and all essential technical and economical variables were integrated in a transport model. Over 1000 complex chemical compounds were evaluated for their suitability as heat carriers. Of these, three ammonia compounds are considered as promising. Considering, however, that complicated and expensive facilities are needed for heat transfer to and from ammonia, water is identified as the better choice. Results, based on 1975 transport prices, show that railway heat transport becomes competitive for heat loads above 50 to 100 MW and transport distances over 20 km.

Influence of the contact roughness upon railway monobloc wheel acoustic behaviour on virtual prototyping approach

NASA Astrophysics Data System (ADS)

Todorov, George; Kamberov, Konstantin; Kralov, Ivan; Ignatov, Ignat

2017-12-01

In this study the virtual prototyping is used for evaluation the influence of the contact roughness upon the acoustic behaviour evaluation of railway monobloc wheel. The proposed procedure covers requirements of the European Standard EN 13979-1 "Wheels and bogies - Monobloc wheels". The main advantage of the acoustic assessment based on the virtual engineering technics - absence of the expensive and time consuming physical tests, is sown. The real industrial-project example is presented and comparison of the numerical and experimental results is used for acoustic behaviour assessment and approval of railway monobloc wheel design.

Adaptive neuro fuzzy system for modelling and prediction of distance pantograph catenary in railway transportation

NASA Astrophysics Data System (ADS)

Panoiu, M.; Panoiu, C.; Lihaciu, I. L.

2018-01-01

This research presents an adaptive neuro-fuzzy system which is used in the prediction of the distance between the pantograph and contact line of the electrical locomotives used in railway transportation. In railway transportation any incident that occurs in the electrical system can have major negative effects: traffic interrupts, equipment destroying. Therefore, a prediction as good as possible of such situations is very useful. In the paper was analyzing the possibility of modeling and prediction the variation of the distance between the pantograph and the contact line using intelligent techniques

Quantitative sensing of bridges, railways, and tunnels with autonomous unmanned aerial vehicles.

DOT National Transportation Integrated Search

2017-05-04

Managing a growing population of deteriorated transportation infrastructure : systems (i.e. bridges, railways, tunnels) is one of biggest challenges faced by the nation. : Traditional inspection and monitoring techniques (e.g., visual inspection, mec...

77 FR 29753 - CaterParrott Railnet, L.L.C.-Sublease and Operation Exemption-Georgia & Florida Railway, L.L.C.

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-18

... Railnet, L.L.C.--Sublease and Operation Exemption-- Georgia & Florida Railway, L.L.C. CaterParrott Railnet, L.L.C. (CPR), a noncarrier, has filed a verified notice of exemption under 49 CFR 1150.31 to sublease from Georgia & Florida Railway, L.L.C. (GRF) and operate approximately 43.2 miles of rail line...

Simulations of wind erosion along the Qinghai-Tibet Railway in north-central Tibet

NASA Astrophysics Data System (ADS)

Jiang, Yingsha; Gao, Yanhong; Dong, Zhibao; Liu, Benli; Zhao, Lin

2018-06-01

Wind erosion along the Qinghai-Tibet Railway causes sand hazard and poses threats to the safety of trains and passengers. A coupled land-surface erosion model (Noah-MPWE) was developed to simulate the wind erosion along the railway. Comparison with the data from the 137Cs isotope analysis shows that this coupled model could simulate the mean erosion amount reasonably. The coupled model was then applied to eight sites along the railway to investigate the wind-erosion distribution and variations from 1979 to 2012. Factors affecting wind erosion spatially and temporally were assessed as well. Majority wind erosion occurs in the non-monsoon season from December to April of the next year except for the site located in desert. The region between Wudaoliang and Tanggula has higher wind erosion occurrences and soil lose amount because of higher frequency of strong wind and relatively lower soil moisture than other sites. Inter-annually, all sites present a significant decreasing trend of annual soil loss with an average rate of -0.18 kg m-2 a-1 in 1979-2012. Decreased frequency of strong wind, increased precipitation and soil moisture contribute to the reduction of wind erosion in 1979-2012. Snow cover duration and vegetation coverage also have great impact on the occurrence of wind erosion.

Life cycle analysis of mitigation methodologies for railway rolling noise and groundbourne vibration.

PubMed

Tuler, Mariana Valente; Kaewunruen, Sakdirat

2017-04-15

Negative outcomes such as noise and vibration generated by railways have become a challenge for both industry and academia in order to guarantee that the railway system can accomplish its purposes and at the same time provide comfort for users and people living in the neighbourhood along the railway corridor. The research interest on this field has been increasing and the advancement in noise and vibration mitigation methodologies can be observed using various engineering techniques that are constantly put into test to solve such effects. In contrast, the life cycle analysis of the mitigation measures has not been thoroughly carried out. There is also a lack of detailed evaluation in the efficiency of various mechanisms for controlling rolling noise and ground-borne vibration. This research is thus focussed on the evaluation of materials used, the total cost associated with the maintenance of such the measures and the carbon footprint left for each type of mechanism. The insight into carbon footprint together with life cycle cost will benefit decision making process for the industry in the selection of optimal and suitable mechanism since the environmental impact is a growing concern around the world. Copyright © 2016 Elsevier Ltd. All rights reserved.

Study on the ultrasonic inspection method using the full matrix capture for the in service railway wheel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peng, Jianping; Wang, Li; Zhang, Yu

The quality of wheel is especially important for the safety of high speed railway. In this paper, a new ultrasonic array inspection method, the Full Matrix Capture (FMC) has been studied and applied to the high speed railway wheel inspection, especially in the wheel web from the tread. Firstly, the principle of FMC and TFM algorithm is discussed, and then the new optimization is applied to the standard FMC; Secondly the fundamentals of optimization is described in detail and the performance is analyzed. Finally, the experiment has been built with a standard phased array block and railway wheel, and thenmore » the testing results are discussed and analyzed. It is demonstrated that this change for the ultrasonic data acquisition and image reconstruction has higher efficiency and lower cost comparing to the FMC's procedure.« less

Replacement Condition Detection of Railway Point Machines Using an Electric Current Sensor.

PubMed

Sa, Jaewon; Choi, Younchang; Chung, Yongwha; Kim, Hee-Young; Park, Daihee; Yoon, Sukhan

2017-01-29

Detecting replacement conditions of railway point machines is important to simultaneously satisfy the budget-limit and train-safety requirements. In this study, we consider classification of the subtle differences in the aging effect-using electric current shape analysis-for the purpose of replacement condition detection of railway point machines. After analyzing the shapes of after-replacement data and then labeling the shapes of each before-replacement data, we can derive the criteria that can handle the subtle differences between "does-not-need-to-be-replaced" and "needs-to-be-replaced" shapes. On the basis of the experimental results with in-field replacement data, we confirmed that the proposed method could detect the replacement conditions with acceptable accuracy, as well as provide visual interpretability of the criteria used for the time-series classification.

Effective Crack Detection in Railway Axles Using Vibration Signals and WPT Energy.

PubMed

Gómez, María Jesús; Corral, Eduardo; Castejón, Cristina; García-Prada, Juan Carlos

2018-05-17

Crack detection for railway axles is key to avoiding catastrophic accidents. Currently, non-destructive testing is used for that purpose. The present work applies vibration signal analysis to diagnose cracks in real railway axles installed on a real Y21 bogie working on a rig. Vibration signals were obtained from two wheelsets with cracks at the middle section of the axle with depths from 5.7 to 15 mm, at several conditions of load and speed. Vibration signals were processed by means of wavelet packet transform energy. Energies obtained were used to train an artificial neural network, with reliable diagnosis results. The success rate of 5.7 mm defects was 96.27%, and the reliability in detecting larger defects reached almost 100%, with a false alarm ratio lower than 5.5%.

Level and Determinants of Knowledge of Symptomatic Knee Osteoarthritis among Railway Workers in Malaysia

PubMed Central

Menke, J. Michael; Challakere Ramaswamy, Vasudeva Murthy; Abdul Manaf, Rizal; Alabsi, Aied M.; Al-Dubai, Sami Abdo Radman

2014-01-01

Background. Symptomatic knee osteoarthritis, an ancient malady greatly impairing modern population quality of life, has stimulated global attention to find effective modes of prevention and intervention. Purpose. This study aimed to assess factors affecting knowledge of symptomatic knee osteoarthritis (knee OA) among Malaysian railway workers. Methods. A cross-sectional study was conducted among 513 railway workers involving eight major states within Peninsular Malaysia using population-based sampling. The assessment instrument was a face-validated, prepiloted, self-administered instrument with sociodemographics and knowledge items on knee OA. Results. Mean (±SD) age of the respondents was 41.4 (±10.7), with the majority aged 50 years or older (34.9%). Of the total respondents, 53.6% had low levels of knowledge of knee OA disease. Multivariate analysis found that four demographic predictors, age ≥50 years, family history of knee OA, self-awareness, and clinical diagnosis of the disease entity, were significantly associated with knowledge scores. Conclusion. The finding of a low level knee OA knowledge among Malaysian railway workers points to an urgent need for massive information to be disseminated among the workers at risk to foster primary prevention and self-care. PMID:24701573

Evaluation of Silicone Fluid for Replacement of PCB Coolants in Railway Industry

DOT National Transportation Integrated Search

1979-06-01

Electrical performance evaluations were made on a railway transformer which was retrofilled with 50 cs polydimethylsiloxane. Comparisons of the data from the PCB-filled transformer retrofilled with the silicone oil indicated no reduction in operating...

Effect of enhanced trackbed support on railway/highway at-grade crossing performance.

DOT National Transportation Integrated Search

2014-12-01

This report documents the long-term performance of 89 railway/highway at-grade crossings in : Kentucky and adjacent states that contain asphalt underlayment underneath the ballast. Asphalt : underlayment increases load carrying capacity for trains an...

Managers in the Making: Careers, Development and Control in Corporate Britain and Japan.

ERIC Educational Resources Information Center

Storey, John; Edwards, Paul; Sisson, Keith

This book presents an analysis of the processes by which managers are made in Britain and Japan. It provides a detailed comparative study of the careers, training, developmental experience, and job demands of managers in eight companies in four sectors: engineering, banking, retail, and communications. Data are from the following sources:…

Modelling of a Double-Track Railway Contact System Electric Field Intensity

NASA Astrophysics Data System (ADS)

Belinsky, Stanislav; Khanzhina, Olga; Sidorov, Alexander

2017-12-01

Working conditions of personnel that serves contact system (CS) are affected by factors including health and safety, security and working hours (danger of rolling stock accidents, danger of electric shock strokes, work at height, severity and tension of work, increased noise level, etc.) Low frequency electromagnetic fields as part of both electric and magnetic fields are among of the most dangerous and harmful factors. These factors can affect not only the working personnel, but also a lot of people, who do not work with the contact system itself, but could be influenced by electromagnetic field as the result of their professional activity. People, who use public transport or live not far from the electrified lines, are endangered by these factors as well. There are results of the theoretical researches in which low frequency electric fields of railway contact system were designed with the use of mathematical and computer modelling. Significant features of electric field distribution near double-track railway in presence or absence of human body were established. The studies showed the dependence of low frequency electric field parameters on the distance to the track axis, height, and presence or absence of human body. The obtained data were compared with permissible standards established in the Russian Federation and other countries with advanced electrified railway system. Evaluation of low frequency electric fields harmful effect on personnel is the main result of this work. It is also established, that location of personnel, voltage and current level, amount of tracks and other factors influence electric fields of contact systems.

Short-range evaluation of air pollution near bus and railway stations.

PubMed

Corfa, E; Maury, F; Segers, P; Fresneau, A; Albergel, A

2004-12-01

In the early morning, during workdays, intensive activity is observed at both bus and railway stations. This particular time is critical because of the combination of three factors: (1) simultaneous departure of many buses and trains, (2) cold engines, and, quite frequently, (3) stable meteorological conditions. In our approach, we use ARIA Local, a simulation package applying CFD tools to air pollution modeling, to study different scenarios. The CFD model used in this study is the MERCURE model, developed by Electricite de France. For a bus station, we simulate a typical morning peak hour situation and study in detail how the pollution is accumulated in the station courtyard and the impact on the close vicinity. Two scenarios are presented: one with classical diesel engine and one with buses using AQUAZOL or NGV fuel. The definition of the sources inside the Eulerian grid is described as static linear sources. The total emission is averaged over the mean path driven by the bus from the bus stop to the exit of the bus station. For a railway station, we simulate a situation in a real railway station within the city of Paris. The emission from a diesel "locomotive" and its impact on air quality is computed and compared to the impact of other nonmobile emissions. In this case, the definition of sources is described as mobile point sources following the trajectory of the train. These two scenarios are discussed in an urban context, taking into account the flow around buildings and different meteorological conditions.

Railway Embankments as New Habitat for Pollinators in an Agricultural Landscape

PubMed Central

Moroń, Dawid; Skórka, Piotr; Lenda, Magdalena; Rożej-Pabijan, Elżbieta; Wantuch, Marta; Kajzer-Bonk, Joanna; Celary, Waldemar; Mielczarek, Łukasz Emil; Tryjanowski, Piotr

2014-01-01

Pollinating insect populations, essential for maintaining wild plant diversity and agricultural productivity, rely on (semi)natural habitats. An increasing human population is encroaching upon and deteriorating pollinator habitats. Thus the population persistence of pollinating insects and their associated ecosystem services may depend upon on man-made novel habitats; however, their importance for ecosystem services is barely understood. We tested if man-made infrastructure (railway embankments) in an agricultural landscape establishes novel habitats that support large populations of pollinators (bees, butterflies, hoverflies) when compared to typical habitats for these insects, i.e., semi-natural grasslands. We also identified key environmental factors affecting the species richness and abundance of pollinators on embankments. Species richness and abundance of bees and butterflies were higher for railway embankments than for grasslands. The occurrence of bare (non-vegetated) ground on embankments positively affected bee species richness and abundance, but negatively affected butterfly populations. Species richness and abundance of butterflies positively depended on species richness of native plants on embankments, whereas bee species richness was positively affected by species richness of non-native flowering plants. The density of shrubs on embankments negatively affected the number of bee species and their abundance. Bee and hoverfly species richness were positively related to wood cover in a landscape surrounding embankments. This is the first study showing that railway embankments constitute valuable habitat for the conservation of pollinators in farmland. Specific conservation strategies involving embankments should focus on preventing habitat deterioration due to encroachment of dense shrubs and maintaining grassland vegetation with patches of bare ground. PMID:25054427

Superconducting fault current limiter for railway transport

NASA Astrophysics Data System (ADS)

Fisher, L. M.; Alferov, D. F.; Akhmetgareev, M. R.; Budovskii, A. I.; Evsin, D. V.; Voloshin, I. F.; Kalinov, A. V.

2015-12-01

A resistive switching superconducting fault current limiter (SFCL) for DC networks with voltage of 3.5 kV and nominal current of 2 kA is developed. The SFCL consists of two series-connected units: block of superconducting modules and high-speed vacuum breaker with total disconnection time not more than 8 ms. The results of laboratory tests of superconducting SFCL modules in current limiting mode are presented. The recovery time of superconductivity is experimentally determined. The possibility of application of SFCL on traction substations of Russian Railways is considered.

Significance of and prospects for fuel recycle in Japan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Otsuka, K.; Ikeda, K.

Japan's nuclear power plant capacity ranks fourth in the world at around 20 GW. But nuclear fuel cycle industries (enrichment, reprocessing and radioactive waste management) are still in their infancy compared with the size and stage of the power plants. Thus it is a matter of urgency to establish a nuclear fuel cycle in Japan which can promote nuclear energy as a quasi-indigenous energy source. Some moves toward establishing a nuclear fuel cycle have been observed recently. As a case in point, in July 1984, the Federation of Electric Power Companies has formally requested Aomori Prefecture to locate nuclear fuelmore » cycle facilities in the Shimokita Peninsula region. Plutonium recovered from spent fuel will be utilized in LWR, ATR, and FBR. Research and development activities on these technologies are in progress.« less

Control system for maximum use of adhesive forces of a railway vehicle in a tractive mode

NASA Astrophysics Data System (ADS)

Spiryagin, Maksym; Lee, Kwan Soo; Yoo, Hong Hee

2008-04-01

The realization of maximum adhesive forces for a railway vehicle is a very difficult process, because it involves using tractive efforts and depends on friction characteristics in the contact zone between wheels and rails. Tractive efforts are realized by means of tractive torques of motors, and their maximum values can provide negative effects such as slip and skid. These situations usually happen when information about friction conditions is lacking. The negative processes have a major influence on wearing of contact bodies and tractive units. Therefore, many existing control systems for vehicles use an effect of a prediction of a friction coefficient between wheels and rails because measuring a friction coefficient at the moment of running vehicle movement is very difficult. One of the ways to solve this task is to use noise spectrum analysis for friction coefficient detection. This noise phenomenon has not been clearly studied and analyzed. In this paper, we propose an adhesion control system of railway vehicles based on an observer, which allows one to determine the maximum tractive torque based on the optimal adhesive force between the wheels (wheel pair) of a railway vehicle and rails (rail track) depending on weight load from a wheel to a rail, friction conditions in the contact zone, a lateral displacement of wheel set and wheel sleep. As a result, it allows a railway vehicle to be driven in a tractive mode by the maximum adhesion force for real friction conditions.

Processes, information, and accounting gaps in the regulation of Argentina's private railways

DOT National Transportation Integrated Search

2001-07-17

Almost a decade after Argentina began privatizing its railways, resolution of the conflicts between regulators, users, and operators continues to take longer, and to be more difficult, than expected. This paper argues that many of these conflicts are...

Replacement Condition Detection of Railway Point Machines Using an Electric Current Sensor

PubMed Central

Sa, Jaewon; Choi, Younchang; Chung, Yongwha; Kim, Hee-Young; Park, Daihee; Yoon, Sukhan

2017-01-01

Detecting replacement conditions of railway point machines is important to simultaneously satisfy the budget-limit and train-safety requirements. In this study, we consider classification of the subtle differences in the aging effect—using electric current shape analysis—for the purpose of replacement condition detection of railway point machines. After analyzing the shapes of after-replacement data and then labeling the shapes of each before-replacement data, we can derive the criteria that can handle the subtle differences between “does-not-need-to-be-replaced” and “needs-to-be-replaced” shapes. On the basis of the experimental results with in-field replacement data, we confirmed that the proposed method could detect the replacement conditions with acceptable accuracy, as well as provide visual interpretability of the criteria used for the time-series classification. PMID:28146057

Real-time monitoring of railway infrastructures using fibre Bragg grating sensors

NASA Astrophysics Data System (ADS)

Roveri, N.; Carcaterra, A.; Sestieri, A.

2015-08-01

In this work we present the results of a field trial with a FBG sensor array system for the real time monitoring of railway traffic and for the structural health monitoring of both the railway track and train wheels. The test campaign is performed on the 2nd line of Milan metropolitan underground, employing more than 50 FBG sensors along 1.5 km of the rail track, where the trains are tested during daily passenger rail transport, with a roughly maximum speeds of 90 km/h. The measurements were continuatively performed for over 6 months, with a sampling frequency of about 400 Hz. The large amount of data/sensors allows a rather accurate statistical treatment of the measurement data and permits, with dedicated algorithms, the estimation of rail and wheel wear, key traffic parameters such as the number of axles, the train speed and load, and, in the next future, the detection of localized imperfections.

The Use of Deconstructed Tires as Elastic Elements in Railway Tracks.

PubMed

Sol-Sánchez, Miguel; Moreno-Navarro, Fernando; Rubio-Gámez, Mª Carmen

2014-08-18

Elastic elements such as rail pads, under sleeper pads and under ballast mats are railway components that allow for a reduction in track deterioration and vibrations. And they are furthermore commonly used to obtain an optimal vertical stiffness of the infrastructure. However, the use of elastomeric materials can increase construction costs and the consumption of raw materials. Thus, the utilization of used tire layers offers an alternative to reuse an abundant waste reducing the cost of elastic elements. In addition, an innovator technique allows deconstructing tire layers without grinding up the material, reducing production costs at the same time that tire properties are remained. This research is focused on the study of the viability of developing elastic components from used tire layers by evaluating the influence of thickness, the resistance capacity of the elements and their behavior in a ballast box. Results indicate the ability of tire pads to manufacture elastic elements (rail pads, under sleeper pads and under ballast mats) to be used in railway tracks.

[Health impact assessment of occupational health policy reform at a multinational chemical company in Japan].

PubMed

Fujino, Yoshihisa; Nagata, Tomohisa; Kuroki, Naomi; Dohi, Seitaro; Uehara, Masamichi; Oyama, Ichiro; Kajiki, Shigeyuki; Mori, Koji

2009-09-01

A health impact assessment (HIA) was conducted to identify potential health impacts arising from policy reform of occupational health and safety at S-chemical company, a multinational global company that employs about 13,000 workers. A multidisciplinary team of health professionals including occupational physicians, an epidemiologist, and public health researchers oversaw the HIA. A project manager from S-company was also involved in the whole HIA process. A literature review, profiling using annual health examination data and interviews with stakeholders and key informants were undertaken in order to identify possible impacts. A range of positive and negative health impacts were identified and develop recommendations for implementation of the new occupational health policy were proposed. The HIA added value to the planning process for the occupational health policy reform.

[A report on the inspection of the Shinkansen Multiple Inspection Train].

PubMed

Niijima, Kuniyuki; Enta, Kazuhiko; Sashihara, Shunsuke

2003-03-01

The multiple inspection train nicknamed "Doctor Yellow" is capable of taking necessary measurements of the track and electrical facilities, and maintains the safety and reliability of the Tokaido Shinkansen corridor. We performed a workplace inspection to examine environmental conditions in this train. The workers were engaged in VDT (visual display terminal) work including the inspection task. The labor environments such as vibration, noise, temperature and lighting, were comfortable. However, some of the working conditions while the Bullet train is running are inevitably restricted. The occupational physicians of the Central Japan Railway Company are expected to play important roles in providing effective health management for the employees under the characteristic work environments on the railroad.

Hydraulic actuation technology for full- and semi-active railway suspensions

NASA Astrophysics Data System (ADS)

Goodall, Roger; Freudenthaler, Gerhard; Dixon, Roger

2014-12-01

The paper describes a simulation study that provides a comprehensive comparison between full-active and semi-active suspensions for improving the vertical ride quality of railway vehicles. It includes an assessment of the ride quality benefits that can theoretically be achieved with idealised devices, and also examines the impact of real devices based upon hydraulic actuation technology.

Comparing the relationships between noise level and annoyance in different surveys - A railway noise vs. aircraft and road traffic comparison

NASA Technical Reports Server (NTRS)

Fields, J. M.; Walker, J. G.

1982-01-01

Annoyance expressed in a railway noise survey is compared with that from two road traffic and three aircraft surveys in order to determine whether responses to various types of environmental noise are source-specific. Railway noise is found to be less annoying than other noises at any given high noise level. Railway noise annoyance rises less rapidly with increasing noise level. At high levels, this gap in reactions averages about 10 dB; it ranges from 4 dB to more than 20 dB. The methods used for comparing the surveys are examined. It is found that methodological uncertainties lead to imprecise comparisons and that different annoyance scales yield different estimates of intersurvey differences.

Soil erosion on road and railways embankments in the Canyoles river Basin. Eastern Spain.

NASA Astrophysics Data System (ADS)

Cerdà, Artemi; Antonio, Giménez-Morera; Félix Ángel, González-Peñaloza; María, Burguet; Paulo, Pereira; José Reyes, Ruiz

2013-04-01

Mediterranean landscapes are man-made. Its human ecosystems are characterized by a high population density, a long history of human settlement and an intense exchange of goods and people (Cerdà et al., 2010). This was possible due to a dense road network, most of it created during the Roman Empire. Modern roads and railways increased drastically during the last 30 years in the Mediterranean. Spain is a clear example of the acceleration of the road and railway infrastructures (Bel, 2005), especially during the 1960s as the tourism started to become a big issue in this part of the World. The increase in road and railways during the last 30 years resulted in a new transport system in Spain, which is based on high-speed railways and motorways. The characteristic of these infrastructures is that they were built by means of embankments, and little is now about the erosional response of those embankments to rainfall. The objective of this research is to assess the soil losses measured in road and railway embankments. The Canyoles River watershed was selected as an example of a region with a dense and recently developed modern network of roads, motorways and railway. The Canyoles river watershed is the natural path between the Mediterranean coast and Central Spain, the capital of the country and the touristic regions. Two motorways and two railways were built or re-built during the last two years and this paper assesses their impact on soil and water losses. As soil erosion rates are dependent on the high intensity - low frequency rainfall events, rainfall simulation experiments (40 experiments) were conducted (1 m2 plots; 60 minutes duration; 78 mm h-1 intensity) were carried out over plots on 2 railway (n=10 + 10) and motorway (n=10 + 10) research sites in August 2011, under very dry conditions. Soil moisture was below 5 % in the top 2 cm soil layer. The vegetation cover was very low in the two road and two railway embankments as the average cover was 4.2 % ranging from

Long-Term Structural Health Monitoring System for a High-Speed Railway Bridge Structure.

PubMed

Ding, You-Liang; Wang, Gao-Xin; Sun, Peng; Wu, Lai-Yi; Yue, Qing

2015-01-01

Nanjing Dashengguan Bridge, which serves as the shared corridor crossing Yangtze River for both Beijing-Shanghai high-speed railway and Shanghai-Wuhan-Chengdu railway, is the first 6-track high-speed railway bridge with the longest span throughout the world. In order to ensure safety and detect the performance deterioration during the long-time service of the bridge, a Structural Health Monitoring (SHM) system has been implemented on this bridge by the application of modern techniques in sensing, testing, computing, and network communication. The SHM system includes various sensors as well as corresponding data acquisition and transmission equipment for automatic data collection. Furthermore, an evaluation system of structural safety has been developed for the real-time condition assessment of this bridge. The mathematical correlation models describing the overall structural behavior of the bridge can be obtained with the support of the health monitoring system, which includes cross-correlation models for accelerations, correlation models between temperature and static strains of steel truss arch, and correlation models between temperature and longitudinal displacements of piers. Some evaluation results using the mean value control chart based on mathematical correlation models are presented in this paper to show the effectiveness of this SHM system in detecting the bridge's abnormal behaviors under the varying environmental conditions such as high-speed trains and environmental temperature.

Static and dynamic behaviours of railway prestressed concrete sleepers with longitudinal through hole

NASA Astrophysics Data System (ADS)

Ngamkhanong, C.; Kaewunruen, S.; Remennikov, A. M.

2017-10-01

As the crosstie beam in railway track systems, the prestressed concrete sleepers (or railroad ties) are principally designed in order to carry wheel loads from the rails to the ground. Their design takes into account static and dynamic loading conditions. It is evident that prestressed concrete has played a significant role as to maintain the high endurance of the sleepers under low to moderate repeated impact loads. In spite of the most common use of the prestressed concrete sleepers in railway tracks, there have always been many demands from rail engineers to improve serviceability and functionality of concrete sleepers. For example, signalling, fibre optic, equipment cables are often damaged either by ballast corners or by tamping machine. There has been a need to re-design concrete sleeper to cater cables internally so that they would not experience detrimental or harsh environments. Accordingly, this study will investigate the effects of through hole or longitudinal hole on static and dynamic behaviours of concrete sleepers under rail shock loading. The modified compression field theory for ultimate strength design of concrete sleepers will be highlighted in this study. The outcome of this study will enable the new design and calculation methods for prestressed concrete sleepers with holes and web opening that practically benefits civil, track and structural engineers in railway industry.

Long-Term Structural Health Monitoring System for a High-Speed Railway Bridge Structure

PubMed Central

Wu, Lai-Yi

2015-01-01

Nanjing Dashengguan Bridge, which serves as the shared corridor crossing Yangtze River for both Beijing-Shanghai high-speed railway and Shanghai-Wuhan-Chengdu railway, is the first 6-track high-speed railway bridge with the longest span throughout the world. In order to ensure safety and detect the performance deterioration during the long-time service of the bridge, a Structural Health Monitoring (SHM) system has been implemented on this bridge by the application of modern techniques in sensing, testing, computing, and network communication. The SHM system includes various sensors as well as corresponding data acquisition and transmission equipment for automatic data collection. Furthermore, an evaluation system of structural safety has been developed for the real-time condition assessment of this bridge. The mathematical correlation models describing the overall structural behavior of the bridge can be obtained with the support of the health monitoring system, which includes cross-correlation models for accelerations, correlation models between temperature and static strains of steel truss arch, and correlation models between temperature and longitudinal displacements of piers. Some evaluation results using the mean value control chart based on mathematical correlation models are presented in this paper to show the effectiveness of this SHM system in detecting the bridge's abnormal behaviors under the varying environmental conditions such as high-speed trains and environmental temperature. PMID:26451387

[The Chinese nuclear test and 'atoms for peace' as a measure for preventing nuclear armament of Japan: the nuclear non-proliferation policy of the United States and the introduction of light water reactors into Japan, 1964-1968].

PubMed

Yamazaki, Masakatsu

2014-07-01

Japan and the United States signed in 1968 a new atomic energy agreement through which US light-water nuclear reactors, including those of the Fukushima Daiichi Nuclear Power Plant of Tokyo Electric Power Company, were to be introduced into Japan. This paper studies the history of negotiations for the 1968 agreement using documents declassified in the 1990s in the US and Japan. After the success of the Chinese nuclear test in October 1964, the United States became seriously concerned about nuclear armament of other countries in Asia including Japan. Expecting that Japan would not have its own nuclear weapons, the US offered to help the country to demonstrate its superiority in some fields of science including peaceful nuclear energy to counter the psychological effect of the Chinese nuclear armament. Driven by his own political agenda, the newly appointed Prime Minister Eisaku Sato responded to the US expectation favorably. When he met in January 1965 with President Johnson, Sato made it clear that Japan would not pursue nuclear weapons. Although the US continued its support after this visit, it nevertheless gave priority to the control of nuclear technology in Japan through the bilateral peaceful nuclear agreement. This paper argues that the 1968 agreement implicitly meant a strategic measure to prevent Japan from going nuclear and also a tactic to persuade Japan to join the Nuclear Non -Proliferation Treaty.

Loss of stability of a railway wheel-set, subcritical or supercritical

NASA Astrophysics Data System (ADS)

Zhang, Tingting; Dai, Huanyun

2017-11-01

Most researches on railway vehicle stability analysis are focused on the codimension 1 (for short, codim 1) bifurcations like subcritical and supercritical Hopf bifurcation. The analysis of codim 1 bifurcation can be completed based on one bifurcation parameter. However, two bifurcation parameters should be considered to give a general view of the motion of the system when it undergoes a degenerate Hopf bifurcation. This kind of bifurcation named the generalised Hopf bifurcation belongs to the codimension 2 (for short, codim 2) bifurcations where two bifurcation parameters need to be taken into consideration. In this paper, we give a numerical analysis of the codim 2 bifurcations of a nonlinear railway wheel-set with the QR algorithm to calculate the eigenvalues of the linearised system incorporating the Golden Cut method and the shooting method to calculate the limit cycles around the Hopf bifurcation points. Here, we found the existence of a generalised Hopf bifurcation where a subcritical Hopf bifurcation turns into a supercritical one with the increase of the bifurcation parameters, which belong to the codim 2 bifurcations, in a nonlinear railway wheel-set model. Only the nonlinear wheel/rail interactive relationship has been taken into consideration in the lateral model that is formulated in this paper. The motion of the wheel-set has been investigated when the bifurcation parameters are perturbed in the neighbourhood of their critical parameters, and the influences of different parameters on critical values of the bifurcation parameters are also given. From the results, it can be seen that the bifurcation types of the wheel-set will change with a variation of the bifurcation parameters in the neighbourhood of their critical values.

[Morbidity with temporary disability in railway tunnel workers].

PubMed

Kudrin, V A; Prokhorov, A A

2003-01-01

The paper presents data on the health status of a large professional group of transport building workers--those who build BAM railway tunnels and those who build Moscow and Saint Petersburg underground stations. Major factors that are associated with underground work and that form the level of morbidity with temporary disability are identified. Respiratory, osteomuscular, digestive diseases, accidents, intoxications, and injuries are predominant in the structure of temporary disability. Lines of better organization of therapeutical-and-prophylactic aid to this contingent are defined.

49 CFR 1220.0 - Applicability.

Code of Federal Regulations, 2013 CFR

2013-10-01

... companies Electric railway companies Express companies Persons furnishing cars to railroads Ratemaking... associations, demurrage and car service bureaus, weighing and inspection bureaus, and other joint activities...

49 CFR 1220.0 - Applicability.

Code of Federal Regulations, 2014 CFR

2014-10-01

... companies Electric railway companies Express companies Persons furnishing cars to railroads Ratemaking... associations, demurrage and car service bureaus, weighing and inspection bureaus, and other joint activities...

49 CFR 1220.0 - Applicability.

Code of Federal Regulations, 2012 CFR

2012-10-01

... companies Electric railway companies Express companies Persons furnishing cars to railroads Ratemaking... associations, demurrage and car service bureaus, weighing and inspection bureaus, and other joint activities...

49 CFR 1220.0 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-10-01

... companies Electric railway companies Express companies Persons furnishing cars to railroads Ratemaking... associations, demurrage and car service bureaus, weighing and inspection bureaus, and other joint activities...

49 CFR 1220.0 - Applicability.

Code of Federal Regulations, 2011 CFR

2011-10-01

... companies Electric railway companies Express companies Persons furnishing cars to railroads Ratemaking... associations, demurrage and car service bureaus, weighing and inspection bureaus, and other joint activities...

Railway cognitive radio to enhance safety, security, and performance of positive train control.

DOT National Transportation Integrated Search

2013-02-01

Robust and interoperable wireless communications are vital to Positive Train Control (PTC). The railway industry has started adopting software-defined radios (SDRs) for packet-data transmission. SDR systems realize previously fixed components as reco...

Surface Excrescence Transition Study Delivery Order 0053

DTIC Science & Technology

2009-04-01

located near the town of Hyuga). The facility was constructed on a former MAGLEV testing track owned by Railway Technical Research Institute of Japan 6...12pp) 6. Takahashi, K., ―The outline of MLU002N on Miyazaki test track,‖ Int. Conf. on Speedup Technology for Railway and MAGLEV Vehicles vol 1 pp

15. Foreground; broken gear from headhouse of electric powered Marine ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

15. Foreground; broken gear from headhouse of electric powered Marine Railway #3; cradle for Marine Railway #3 in background. - Thames Tow Boat Company, Foot of Farnsworth Street, New London, New London County, CT

Development of a model to assess acoustic treatments to reduce railway noise

NASA Astrophysics Data System (ADS)

Jeong, H.; Squicciarini, G.; Thompson, D. J.; Ryue, J.

2016-09-01

Porous materials have recently been used in absorptive treatments around railway tracks to reduce noise emissions. To investigate the effect of porous materials, a finite element model has been developed. 2D models for porous materials have been considered either as an equivalent fluid or as a poroelastic material based on the Biot theory. The two models have been validated and compared with each other to check the effect of the skeleton vibration. The poroelastic FE model has been coupled with a 2D acoustic boundary element model for use in railway applications. The results show that it may be necessary to include the frame vibration, especially at low frequencies where a frame resonance occurs. A method for the characterization of porous materials is also discussed. From this it is shown that the elastic properties of the material determine the resonance frequency and the magnitude.

Perceptual constancy in auditory perception of distance to railway tracks.

PubMed

De Coensel, Bert; Nilsson, Mats E; Berglund, Birgitta; Brown, A L

2013-07-01

Distance to a sound source can be accurately estimated solely from auditory information. With a sound source such as a train that is passing by at a relatively large distance, the most important auditory information for the listener for estimating its distance consists of the intensity of the sound, spectral changes in the sound caused by air absorption, and the motion-induced rate of change of intensity. However, these cues are relative because prior information/experience of the sound source-its source power, its spectrum and the typical speed at which it moves-is required for such distance estimates. This paper describes two listening experiments that allow investigation of further prior contextual information taken into account by listeners-viz., whether they are indoors or outdoors. Asked to estimate the distance to the track of a railway, it is shown that listeners assessing sounds heard inside the dwelling based their distance estimates on the expected train passby sound level outdoors rather than on the passby sound level actually experienced indoors. This form of perceptual constancy may have consequences for the assessment of annoyance caused by railway noise.

Track Detection in Railway Sidings Based on MEMS Gyroscope Sensors

PubMed Central

Broquetas, Antoni; Comerón, Adolf; Gelonch, Antoni; Fuertes, Josep M.; Castro, J. Antonio; Felip, Damià; López, Miguel A.; Pulido, José A.

2012-01-01

The paper presents a two-step technique for real-time track detection in single-track railway sidings using low-cost MEMS gyroscopes. The objective is to reliably know the path the train has taken in a switch, diverted or main road, immediately after the train head leaves the switch. The signal delivered by the gyroscope is first processed by an adaptive low-pass filter that rejects noise and converts the temporal turn rate data in degree/second units into spatial turn rate data in degree/meter. The conversion is based on the travelled distance taken from odometer data. The filter is implemented to achieve a speed-dependent cut-off frequency to maximize the signal-to-noise ratio. Although direct comparison of the filtered turn rate signal with a predetermined threshold is possible, the paper shows that better detection performance can be achieved by processing the turn rate signal with a filter matched to the rail switch curvature parameters. Implementation aspects of the track detector have been optimized for real-time operation. The detector has been tested with both simulated data and real data acquired in railway campaigns. PMID:23443376

Structural Health Monitoring of Railway Transition Zones Using Satellite Radar Data.

PubMed

Wang, Haoyu; Chang, Ling; Markine, Valeri

2018-01-31

Transition zones in railway tracks are locations with considerable changes in the rail-supporting structure. Typically, they are located near engineering structures, such as bridges, culverts and tunnels. In such locations, severe differential settlements often occur due to the different material properties and structure behavior. Without timely maintenance, the differential settlement may lead to the damage of track components and loss of passenger's comfort. To ensure the safety of railway operations and reduce the maintenance costs, it is necessary to consecutively monitor the structural health condition of the transition zones in an economical manner and detect the changes at an early stage. However, using the current in situ monitoring of transition zones is hard to achieve this goal, because most in situ techniques (e.g., track-measuring coaches) are labor-consuming and usually not frequently performed (approximately twice a year in the Netherlands). To tackle the limitations of the in situ techniques, a Satellite Synthetic Aperture Radar (InSAR) system is presented in this paper, which provides a potential solution for a consecutive structural health monitoring of transition zones with bi-/tri-weekly data update and mm-level precision. To demonstrate the feasibility of the InSAR system for monitoring transition zones, a transition zone is tested. The results show that the differential settlement in the transition zone and the settlement rate can be observed and detected by the InSAR measurements. Moreover, the InSAR results are cross-validated against measurements obtained using a measuring coach and a Digital Image Correlation (DIC) device. The results of the three measuring techniques show a good correlation, which proves the applicability of InSAR for the structural health monitoring of transition zones in railway track.

Structural Health Monitoring of Railway Transition Zones Using Satellite Radar Data

PubMed Central

Chang, Ling; Markine, Valeri

2018-01-01

Transition zones in railway tracks are locations with considerable changes in the rail-supporting structure. Typically, they are located near engineering structures, such as bridges, culverts and tunnels. In such locations, severe differential settlements often occur due to the different material properties and structure behavior. Without timely maintenance, the differential settlement may lead to the damage of track components and loss of passenger’s comfort. To ensure the safety of railway operations and reduce the maintenance costs, it is necessary to consecutively monitor the structural health condition of the transition zones in an economical manner and detect the changes at an early stage. However, using the current in situ monitoring of transition zones is hard to achieve this goal, because most in situ techniques (e.g., track-measuring coaches) are labor-consuming and usually not frequently performed (approximately twice a year in the Netherlands). To tackle the limitations of the in situ techniques, a Satellite Synthetic Aperture Radar (InSAR) system is presented in this paper, which provides a potential solution for a consecutive structural health monitoring of transition zones with bi-/tri-weekly data update and mm-level precision. To demonstrate the feasibility of the InSAR system for monitoring transition zones, a transition zone is tested. The results show that the differential settlement in the transition zone and the settlement rate can be observed and detected by the InSAR measurements. Moreover, the InSAR results are cross-validated against measurements obtained using a measuring coach and a Digital Image Correlation (DIC) device. The results of the three measuring techniques show a good correlation, which proves the applicability of InSAR for the structural health monitoring of transition zones in railway track. PMID:29385070

Tracking It Down: Predictors of Risky Drinking in an Australian Railway.

ERIC Educational Resources Information Center

Zinkiewicz, Lucy; Davey, Jeremy; Obst, Patricia; Sheehan, Mary

1999-01-01

Surveys employees (N=4,979) of an Australian state railway to determine self-reported employee alcohol use and the influence of work-related risk factors on this use. Examination of risk factors previously associated with work-related problem drinking showed that gender, nights away from home for work, job satisfaction, and availability of alcohol…

Measures for groundwater security during and after the Hanshin-Awaji earthquake (1995) and the Great East Japan earthquake (2011), Japan

NASA Astrophysics Data System (ADS)

Tanaka, Tadashi

2016-03-01

Many big earthquakes have occurred in the tectonic regions of the world, especially in Japan. Earthquakes often cause damage to crucial life services such as water, gas and electricity supply systems and even the sewage system in urban and rural areas. The most severe problem for people affected by earthquakes is access to water for their drinking/cooking and toilet flushing. Securing safe water for daily life in an earthquake emergency requires the establishment of countermeasures, especially in a mega city like Tokyo. This paper described some examples of groundwater use in earthquake emergencies, with reference to reports, books and newspapers published in Japan. The consensus is that groundwater, as a source of water, plays a major role in earthquake emergencies, especially where the accessibility of wells coincides with the emergency need. It is also important to introduce a registration system for citizen-owned and company wells that can form the basis of a cooperative during a disaster; such a registration system was implemented by many Japanese local governments after the Hanshin-Awaji Earthquake in 1995 and the Great East Japan Earthquake in 2011, and is one of the most effective countermeasures for groundwater use in an earthquake emergency. Emphasis is also placed the importance of establishing of a continuous monitoring system of groundwater conditions for both quantity and quality during non-emergency periods.

Methodology for quantification of waste generated in Spanish railway construction works.

PubMed

de Guzmán Báez, Ana; Villoria Sáez, Paola; del Río Merino, Mercedes; García Navarro, Justo

2012-05-01

In the last years, the European Union (EU) has been focused on the reduction of construction and demolition (C&D) waste. Specifically, in 2006, Spain generated roughly 47million tons of C&D waste, of which only 13.6% was recycled. This situation has lead to the drawing up of many regulations on C&D waste during the past years forcing EU countries to include new measures for waste prevention and recycling. Among these measures, the mandatory obligation to quantify the C&D waste expected to be originated during a construction project is mandated. However, limited data is available on civil engineering projects. Therefore, the aim of this research study is to improve C&D waste management in railway projects, by developing a model for C&D waste quantification. For this purpose, we develop two equations which estimate in advance the amount, both in weight and volume, of the C&D waste likely to be generated in railway construction projects, including the category of C&D waste generated for the entire project. Copyright © 2012 Elsevier Ltd. All rights reserved.

The Use of Deconstructed Tires as Elastic Elements in Railway Tracks

PubMed Central

Sol-Sánchez, Miguel; Moreno-Navarro, Fernando; Rubio-Gámez, Mª Carmen

2014-01-01

Elastic elements such as rail pads, under sleeper pads and under ballast mats are railway components that allow for a reduction in track deterioration and vibrations. And they are furthermore commonly used to obtain an optimal vertical stiffness of the infrastructure. However, the use of elastomeric materials can increase construction costs and the consumption of raw materials. Thus, the utilization of used tire layers offers an alternative to reuse an abundant waste reducing the cost of elastic elements. In addition, an innovator technique allows deconstructing tire layers without grinding up the material, reducing production costs at the same time that tire properties are remained. This research is focused on the study of the viability of developing elastic components from used tire layers by evaluating the influence of thickness, the resistance capacity of the elements and their behavior in a ballast box. Results indicate the ability of tire pads to manufacture elastic elements (rail pads, under sleeper pads and under ballast mats) to be used in railway tracks. PMID:28788168

A framework to support human factors of automation in railway intelligent infrastructure.

PubMed

Dadashi, Nastaran; Wilson, John R; Golightly, David; Sharples, Sarah

2014-01-01

Technological and organisational advances have increased the potential for remote access and proactive monitoring of the infrastructure in various domains and sectors - water and sewage, oil and gas and transport. Intelligent Infrastructure (II) is an architecture that potentially enables the generation of timely and relevant information about the state of any type of infrastructure asset, providing a basis for reliable decision-making. This paper reports an exploratory study to understand the concepts and human factors associated with II in the railway, largely drawing from structured interviews with key industry decision-makers and attachment to pilot projects. Outputs from the study include a data-processing framework defining the key human factors at different levels of the data structure within a railway II system and a system-level representation. The framework and other study findings will form a basis for human factors contributions to systems design elements such as information interfaces and role specifications.

High-tension electrical-arc-induced thermal burns caused by railway overhead cables.

PubMed

Koller, J

1991-10-01

Eleven patients with high-tension electrical-arc-induced thermal burns due to railway overhead cables were treated at the Bratislava Burn Department during a relatively short period of 18 months. All the injuries occurred by the same mechanism, that is persons climbing on top of railway carriages and approaching the 25,000 V a.c. overhead cables. All the burns were the result of an electrical arc passing externally to the body, with subsequent ignition of the victim's clothes. The cutaneous burns, ranging from 24 to 79 per cent of the BSA, were mostly deep partial to full skin thickness injuries. One patient died on day 5 postburn, the other survived. In spite of high-tension aetiology, no true electrical injuries appear to have occurred and no amputations were necessary. The pathophysiology and possible preventive measures are discussed. It must be stressed that arcing can be induced by an earthed object approaching, but not touching, a cable carrying a high voltage.

Optimizing suicide and trespass prevention on railways: a problem-solving model from the RESTRAIL project.

PubMed

Havârneanu, Grigore M; Burkhardt, Jean-Marie; Silla, Anne

2017-12-01

Suicides and trespassing accidents result in more than 3800 fatalities in Europe, representing 88% of all fatalities occurring within the EU railway system. This paper presents a problem-solving model, which consists of a multistep approach structuring the analysis of a suicide or trespass-related problem on the railways. First, we present the method used to design, evaluate and improve the problem-solving model. Then we describe the model in detail: it comprises six steps with several subsequent actions, and each action is approached through a checklist of prompting questions and possible answers. At the end, we discuss the added value of this model for decision makers and its usability in the selection of optimal prevention measures.

[Evaluation of ecosystem resilience in the regions across Qinghai-Tibet railway based on GIS].

PubMed

Gao, Jiang-bo; Zhao, Zhi-qiang; Li, Shuang-cheng

2008-11-01

Based on GIS technique and the methods of mean-squared deviation weight decision and catastrophe progression, a more clear definition and associated evaluation for ecosystem resilience were given, with a case study in the regions across Qinghai-Tibet railway by using the indices of plant community coverage, species diversity, and biomass. It was shown that the areas with high ecosystem resilience were mainly located in the Qilian Mountain meadow grassland, Huangshui Valley needle-leaved and deciduous broad-leaved forest, and south Tanggula Mountain kobresia swamp meadow, while those with the lowest resilience were in the central part of Qaidam Basin, and the Kunlun Mountains. Most areas in the regions had higher or medium ecosystem resilience, with a trend of that in the south of Kunlun Mountains, the resilience in the north of the railway was lower, while in the east of Qaidam Basin (especially in the Qinghai Lake area), the resilience was lower in the south than in the north of the railway. Through the evaluation of ecosystem resilience, the key issues in the process of ecological resilience could be found, and corresponding effective measures would be pointed out to manage alpine ecosystems. Moreover, combining with the evaluation of vulnerability, scientific basis for regional development could be provided to avoid or mitigate the negative effects of human activities on eco-environment.

Enterprise Cloud Architecture for Chinese Ministry of Railway

NASA Astrophysics Data System (ADS)

Shan, Xumei; Liu, Hefeng

Enterprise like PRC Ministry of Railways (MOR), is facing various challenges ranging from highly distributed computing environment and low legacy system utilization, Cloud Computing is increasingly regarded as one workable solution to address this. This article describes full scale cloud solution with Intel Tashi as virtual machine infrastructure layer, Hadoop HDFS as computing platform, and self developed SaaS interface, gluing virtual machine and HDFS with Xen hypervisor. As a result, on demand computing task application and deployment have been tackled per MOR real working scenarios at the end of article.

58. Detail of steam pistons and gears for driving winches ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

58. Detail of steam pistons and gears for driving winches to Marine Railways #1 and #2, Marine Railway Headhouse, ground floor, looking north. - Thames Tow Boat Company, Foot of Farnsworth Street, New London, New London County, CT