Community Building as an Instructional Goal in Japanese Adult Basic Education

ERIC Educational Resources Information Center

Jacobson, Erik

2009-01-01

This paper presents the results of a multisite case study of adult basic education in Japan. A key finding of the study is that as part of community building within classrooms, students, teachers, and administrators prioritize human relations and expressions of empathy rather than academic skill development. In contrast to Japanese educational…

10 CFR 434.504 - Use of the prototype building to determine the energy cost budget.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Use of the prototype building to determine the energy cost budget. 434.504 Section 434.504 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance...

The potential for distributed generation in Japanese prototype buildings: A DER-CAM analysis of policy, tariff design, building energy use, and technology development (English Version)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Nan; Marnay, Chris; Firestone, Ryan

-CAM provides a global optimization, albeit idealized, that shows how the necessary useful energy loads can be provided for at minimum cost by selection and operation of on-site generation, heat recovery, cooling, and efficiency improvements. This study examines five prototype commercial buildings and uses DER-CAM to select the economically optimal DER system for each. The five building types are office, hospital, hotel, retail, and sports facility. Each building type was considered for both 5,000 and 10,000 square meter floor sizes. The energy consumption of these building types is based on building energy simulation and published literature. Based on the optimization results, energy conservation and the emissions reduction were also evaluated. Furthermore, a comparison study between Japan and the U.S. has been conducted covering the policy, technology and the utility tariffs effects on DER systems installations. This study begins with an examination of existing DER research. Building energy loads were then generated through simulation (DOE-2) and scaled to match available load data in the literature. Energy tariffs in Japan and the U.S. were then compared: electricity prices did not differ significantly, while commercial gas prices in Japan are much higher than in the U.S. For smaller DER systems, the installation costs in Japan are more than twice those in the U.S., but this difference becomes smaller with larger systems. In Japan, DER systems are eligible for a 1/3 rebate of installation costs, while subsidies in the U.S. vary significantly by region and application. For 10,000 m{sup 2} buildings, significant decreases in fuel consumption, carbon emissions, and energy costs were seen in the economically optimal results. This was most noticeable in the sports facility, followed the hospital and hotel. This research demonstrates that office buildings can benefit from CHP, in contrast to popular opinion. For hospitals and sports facilities, the use of waste heat is

Development of Residential Prototype Building Models and Analysis System for Large-Scale Energy Efficiency Studies Using EnergyPlus

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mendon, Vrushali V.; Taylor, Zachary T.

ABSTRACT: Recent advances in residential building energy efficiency and codes have resulted in increased interest in detailed residential building energy models using the latest energy simulation software. One of the challenges of developing residential building models to characterize new residential building stock is to allow for flexibility to address variability in house features like geometry, configuration, HVAC systems etc. Researchers solved this problem in a novel way by creating a simulation structure capable of creating fully-functional EnergyPlus batch runs using a completely scalable residential EnergyPlus template system. This system was used to create a set of thirty-two residential prototype buildingmore » models covering single- and multifamily buildings, four common foundation types and four common heating system types found in the United States (US). A weighting scheme with detailed state-wise and national weighting factors was designed to supplement the residential prototype models. The complete set is designed to represent a majority of new residential construction stock. The entire structure consists of a system of utility programs developed around the core EnergyPlus simulation engine to automate the creation and management of large-scale simulation studies with minimal human effort. The simulation structure and the residential prototype building models have been used for numerous large-scale studies, one of which is briefly discussed in this paper.« less

[Building Process and Architectural Planning Characteristics of Daehan Hospital Main Building].

PubMed

Lee, Geauchul

2016-04-01

This paper explores the introduction process of Daehan Hospital from Japan as the modern medical facility in Korea, and the architectural planning characteristics as a medical facility through the detailed building process of Daehan Hospital main building. The most noticeable characteristic of Daehan Hospital is that it was designed and constructed not by Korean engineers but by Japanese engineers. Therefore, Daehan Hospital was influenced by Japanese early modern medical facility, and Japanese engineers modeled Daehan Hospital main building on Tokyo Medical School main building which was constructed in 1876 as the first national medical school and hospital. The architectural type of Tokyo Medical School main building was a typical school architecture in early Japanese modern period which had a middle corridor and a pseudo Western-style tower, but Tokyo Medical School main building became the model of a medical facility as the symbol of the medical department in Tokyo Imperial University. This was the introduction and transplantation process of Japanese modern 'model' like as other modern systems and technologies during the Korean modern transition period. However, unlike Tokyo Medical School main building, Daehan Hospital main building was constructed not as a wooden building but as a masonry building. Comparing with the function of Daehan Hospital main building, its architectural form and construction costs was excessive scale, which was because Japanese Resident-General of Korea had the intention of ostentation that Japanese modernity was superior to Korean Empire.

Procedural Modeling for Rapid-Prototyping of Multiple Building Phases

NASA Astrophysics Data System (ADS)

Saldana, M.; Johanson, C.

2013-02-01

RomeLab is a multidisciplinary working group at UCLA that uses the city of Rome as a laboratory for the exploration of research approaches and dissemination practices centered on the intersection of space and time in antiquity. In this paper we present a multiplatform workflow for the rapid-prototyping of historical cityscapes through the use of geographic information systems, procedural modeling, and interactive game development. Our workflow begins by aggregating archaeological data in a GIS database. Next, 3D building models are generated from the ArcMap shapefiles in Esri CityEngine using procedural modeling techniques. A GIS-based terrain model is also adjusted in CityEngine to fit the building elevations. Finally, the terrain and city models are combined in Unity, a game engine which we used to produce web-based interactive environments which are linked to the GIS data using keyhole markup language (KML). The goal of our workflow is to demonstrate that knowledge generated within a first-person virtual world experience can inform the evaluation of data derived from textual and archaeological sources, and vice versa.

Utilizing a Rapid Prototyping Approach in the Building of a Hypermedia-Based Reference Station.

ERIC Educational Resources Information Center

Sell, Dan

This paper discusses the building of a hypermedia-based reference station at the Wright Laboratory Technical Library, Wright-Patterson Air Force Base, Ohio. Following this, the paper focuses on an electronic user survey from which data is collected and analysis is made. The survey data is used in a rapid prototyping approach, which is defined as…

PERTS: A Prototyping Environment for Real-Time Systems

NASA Technical Reports Server (NTRS)

Liu, Jane W. S.; Lin, Kwei-Jay; Liu, C. L.

1991-01-01

We discuss an ongoing project to build a Prototyping Environment for Real-Time Systems, called PERTS. PERTS is a unique prototyping environment in that it has (1) tools and performance models for the analysis and evaluation of real-time prototype systems, (2) building blocks for flexible real-time programs and the support system software, (3) basic building blocks of distributed and intelligent real time applications, and (4) an execution environment. PERTS will make the recent and future theoretical advances in real-time system design and engineering readily usable to practitioners. In particular, it will provide an environment for the use and evaluation of new design approaches, for experimentation with alternative system building blocks and for the analysis and performance profiling of prototype real-time systems.

Building a prototype of a Martian base in Poland, an architectural design overview and progress report

NASA Astrophysics Data System (ADS)

Kozicki, Janek

This talk focuses on recent advances in the construction of a prototype 1000 m2 Martian out-post for 8 inhabitants. The architectural design for such a Martian base has been presented previously on COSPAR 2008, the presentation being entitled ,,Architectural design proposal for a Martian base to continue NASA Mars Design Reference Mission". The presentation was welcomed with warm interest by various institutions, some of which offered help in building a prototype such as providing the building site or funding. This year's oral presentation will focus on a progress report and will briefly describe the architectural design. The architectural design is inspired by terrestrial pneumatic architecture. It has small volume, can be easily transported and provides a large habitable space. An architectural solution analo-gous to a terrestrial house with a studio and a workshop was assumed. The spatial placement of the following zones was carefully considered: residential, agricultural and science, as well as garage and workshop. Further attention was paid to transportation routes and a control and communications center. The issues of a life support system, energy, food, water and waste recycling were also discussed. This Martian base was designed to be crewed by a team of eight people to stay on Mars for at least one and a half year. An Open Plan architectural solution was assumed, with a high level of modularity. Walls of standardized sizes with zip-fasteners allow free rearrangement of the interior to adapt to a new situation. The prototype of such a Polish-origin Martian outpost will be used in a manner similar to MDRS or FMARS but to a larger extent. The prototype's design itself will be tested and corrected to achieve a design which can be used on Mars. The procedure of unfolding the pneumatic modules and floor leveling will be tested. The 1000 m2 interior will be used for various simulation exercises: socio-psychological testing, interior arrangement experiments

Integrated prototyping environment for programmable automation

NASA Astrophysics Data System (ADS)

da Costa, Francis; Hwang, Vincent S. S.; Khosla, Pradeep K.; Lumia, Ronald

1992-11-01

We propose a rapid prototyping environment for robotic systems, based on tenets of modularity, reconfigurability and extendibility that may help build robot systems `faster, better, and cheaper.' Given a task specification, (e.g., repair brake assembly), the user browses through a library of building blocks that include both hardware and software components. Software advisors or critics recommend how blocks may be `snapped' together to speedily construct alternative ways to satisfy task requirements. Mechanisms to allow `swapping' competing modules for comparative test and evaluation studies are also included in the prototyping environment. After some iterations, a stable configuration or `wiring diagram' emerges. This customized version of the general prototyping environment still contains all the hooks needed to incorporate future improvements in component technologies and to obviate unplanned obsolescence. The prototyping environment so described is relevant for both interactive robot programming (telerobotics) and iterative robot system development (prototyping).

The energy performance of prototype holographic glazings

NASA Astrophysics Data System (ADS)

Papamichael, K.; Beltran, L.; Furler, R.; Lee, E. S.; Selkowitz, S.; Rubin, M.

1993-02-01

We report on the simulation of the energy performance of prototype holographic glazings in commercial office buildings in a California climate. These prototype glazings, installed above conventional side windows, are designed to diffract the transmitted solar radiation and reflect it off the ceiling, providing adequate daylight illumination for typical office tasks up to 10m from the window. In this study, we experimentally determined a comprehensive set of solar-optical properties and characterized the contribution of the prototype holographic glazings to workplane illuminance in a scale model of a typical office space. We then used the scale model measurements to simulate the energy performance of the holographic glazings over the course of an entire year for four window orientations (North, East, South and West) for the inland Los Angeles climate, using the DOE-2.lD building energy analysis computer program. The results of our experimental analyses indicate that these prototype holographic glazings diffract only a small fraction of the incident light. The results of this study indicate that these prototype holographic glazings will not save energy in commercial office buildings. Their performance is very similar to that of clear glass, which, through side windows, cannot efficiently illuminate more than a 4-6 m depth of a building's perimeter, because the cooling penalties due to solar heat gain are greater than the electric lighting savings due to daylighting.

Summary Scientific Performance of EUCLID Detector Prototypes

NASA Technical Reports Server (NTRS)

Rauscher, Bernard J.

2011-01-01

NASA and the European Space Agency (ESA) plan to partner to build the EUCLID mission. EUCLID is a mission concept for studying the Dark Energy that is hypothesized to account for the accelerating cosmic expansion. For the past year, NASA has been building detector prototypes at Teledyne Imaging Sensors. This talk will summarize the measured scientific performance of these detector prototypes for astrophysical and cosmological applications.

Estimates of Embodied Global Energy and Air-Emission Intensities of Japanese Products for Building a Japanese Input–Output Life Cycle Assessment Database with a Global System Boundary

PubMed Central

2012-01-01

To build a life cycle assessment (LCA) database of Japanese products embracing their global supply chains in a manner requiring lower time and labor burdens, this study estimates the intensity of embodied global environmental burden for commodities produced in Japan. The intensity of embodied global environmental burden is a measure of the environmental burden generated globally by unit production of the commodity and can be used as life cycle inventory data in LCA. The calculation employs an input–output LCA method with a global link input–output model that defines a global system boundary grounded in a simplified multiregional input–output framework. As results, the intensities of embodied global environmental burden for 406 Japanese commodities are determined in terms of energy consumption, greenhouse-gas emissions (carbon dioxide, methane, nitrous oxide, perfluorocarbons, hydrofluorocarbons, sulfur hexafluoride, and their summation), and air-pollutant emissions (nitrogen oxide and sulfur oxide). The uncertainties in the intensities of embodied global environmental burden attributable to the simplified structure of the global link input–output model are quantified using Monte Carlo simulation. In addition, by analyzing the structure of the embodied global greenhouse-gas intensities we characterize Japanese commodities in the context of LCA embracing global supply chains. PMID:22881452

[Action tendencies of respect-related emotions: Focus on emotion episodes in Japanese university students].

PubMed

Muto, Sera

2016-06-01

This study examined the action tendencies of respect-related emotions in Japanese university students. Participants (n = 405) randomly received a questionnaire about one of six respect-related emotions: (a) keiai (respect mingled with mild love); (b) shinsui (idolatry worship, and adoration); (c) ifu (awe mingled with fear); (d) kanshin (admiration); (e) kyotan (wonder); and (f) sonkei (respect proper) and were asked to recall a situation they felt the emotion. Next, they rated how much they felt like doing the respect-related (intrapersonal or interpersonal) actions in the situation. Statistical analysis revealed several action tendencies of respect-related emotions, however, the degree of each differed between the prototypical episodes of the emotions (a)-(e). The action tendency pattern of sonkei was most similar to that of keiai, therefore keiai could be considered as the prototypical feeling of sonkei in university students. Furthermore, almost all the respect-related emotions tended to strongly motivate willingness for self-correction and improvement. These findings suggest that respect-related emotions play an important role in self-improvement and building good relationships with superiors, at least in late adolescence.

Analysis of the eukaryotic community and metabolites found in clay wall material used in the construction of traditional Japanese buildings.

PubMed

Kitajima, Sakihito; Kamei, Kaeko; Nishitani, Maiko; Sato, Hiroyuki

2010-01-01

Clay wall (tsuchikabe in Japanese) material for Japanese traditional buildings is manufactured by fermenting a mixture of clay, sand, and rice straw. The aim of this study was to understand the fermentation process in order to gain insight into the ways waste biomass can be used to produce useful materials. In this study, in addition to Clostridium, we suggested that the family Nectriaceae and the Scutellinia sp. of fungi were important in degrading cell wall materials of rice straw, such as cellulose and/or lignin. The microorganisms in the clay wall material produced sulfur-containing inorganic compounds that may sulfurate minerals in clay particles, and polysaccharides that give viscosity to clay wall material, thus increasing workability for plastering, and possibly giving water-resistance to the dried clay wall.

ICI Showcase House Prototype

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2009-02-16

Building Science Corporation collaborated with ICI Homes in Daytona Beach, FL on a 2008 prototype Showcase House that demonstrates the energy efficiency and durability upgrades that ICI currently promotes through its in-house efficiency program called EFactor.

PERTS: A Prototyping Environment for Real-Time Systems

NASA Technical Reports Server (NTRS)

Liu, Jane W. S.; Lin, Kwei-Jay; Liu, C. L.

1993-01-01

PERTS is a prototyping environment for real-time systems. It is being built incrementally and will contain basic building blocks of operating systems for time-critical applications, tools, and performance models for the analysis, evaluation and measurement of real-time systems and a simulation/emulation environment. It is designed to support the use and evaluation of new design approaches, experimentations with alternative system building blocks, and the analysis and performance profiling of prototype real-time systems.

Using Rapid Prototyping to Design a Smoking Cessation Website with End-Users.

PubMed

Ronquillo, Charlene; Currie, Leanne; Rowsell, Derek; Phillips, J Craig

2016-01-01

Rapid prototyping is an iterative approach to design involving cycles of prototype building, review by end-users and refinement, and can be a valuable tool in user-centered website design. Informed by various user-centered approaches, we used rapid prototyping as a tool to collaborate with users in building a peer-support focused smoking-cessation website for gay men living with HIV. Rapid prototyping was effective in eliciting feedback on the needs of this group of potential end-users from a smoking cessation website.

A Powerful Protector of the Japanese People: The History of the Japanese Hospital in Steveston, British Columbia, Canada,18961942.

PubMed

Vandenberg, Helen

2017-01-01

From 1896 to 1942, a Japanese hospital operated in the village of Steveston, British Columbia, Canada. For the first 4 years, Japanese Methodist missionaries utilized a small mission building as a makeshift hospital, until a larger institution was constructed by the local Japanese Fishermen's Association in 1900. The hospital operated until the Japanese internment, after the attack on Pearl Harbor during World War II. This study offers important commentary about the relationships between health, hospitals, and race in British Columbia during a period of increased immigration and economic upheaval. From the unique perspective of Japanese leaders, this study provides new insight about how Japanese populations negotiated hospital care, despite a context of severe racial discrimination. Japanese populations utilized Christianization, fishing expertise, and hospital work to garner more equitable access to opportunities and resources. This study demonstrates that in addition to providing medical treatment, training grounds for health-care workers, and safe refuge for the sick, hospitals played a significant role in confronting broader racialized inequities in Canada's past.

Mechatronic Prototype of Parabolic Solar Tracker.

PubMed

Morón, Carlos; Díaz, Jorge Pablo; Ferrández, Daniel; Ramos, Mari Paz

2016-06-15

In the last 30 years numerous attempts have been made to improve the efficiency of the parabolic collectors in the electric power production, although most of the studies have focused on the industrial production of thermoelectric power. This research focuses on the application of this concentrating solar thermal power in the unexplored field of building construction. To that end, a mechatronic prototype of a hybrid paraboloidal and cylindrical-parabolic tracker based on the Arduido technology has been designed. The prototype is able to measure meteorological data autonomously in order to quantify the energy potential of any location. In this way, it is possible to reliably model real commercial equipment behavior before its deployment in buildings and single family houses.

Construction and operation of a support facilities (Building 729) for operation/testing of a prototype accelerator/storage ring (XLS) and machine shop for the National Synchrotron Light Source at Brookhaven National Laboratory, Upton, New York

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-06-01

Proposed action is to construct at BNL a 5,600-ft[sup 2] support building, install and operate a prototypic 200 MeV accelerator and a prototypic 700 MeV storage ring within, and to construct and operate a 15 kV substation to power the building. The accelerator and storage ring would comprise the x-ray lithography source or XLS.

Review on CNC-Rapid Prototyping

NASA Astrophysics Data System (ADS)

Z, M. Nafis O.; Y, Nafrizuan M.; A, Munira M.; J, Kartina

2012-09-01

This article reviewed developments of Computerized Numerical Control (CNC) technology in rapid prototyping process. Rapid prototyping (RP) can be classified into three major groups; subtractive, additive and virtual. CNC rapid prototyping is grouped under the subtractive category which involves material removal from the workpiece that is larger than the final part. Richard Wysk established the use of CNC machines for rapid prototyping using sets of 2½-D tool paths from various orientations about a rotary axis to machine parts without refixturing. Since then, there are few developments on this process mainly aimed to optimized the operation and increase the process capabilities to stand equal with common additive type of RP. These developments include the integration between machining and deposition process (hybrid RP), adoption of RP to the conventional machine and optimization of the CNC rapid prototyping process based on controlled parameters. The article ended by concluding that the CNC rapid prototyping research area has a vast space for improvement as in the conventional machining processes. Further developments and findings will enhance the usage of this method and minimize the limitation of current approach in building a prototype.

Development and Analysis of Desiccant Enhanced Evaporative Air Conditioner Prototype

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kozubal, E.; Woods, J.; Judkoff, R.

2012-04-01

This report documents the design of a desiccant enhanced evaporative air conditioner (DEVAP AC) prototype and the testing to prove its performance. Previous numerical modeling and building energy simulations indicate a DEVAP AC can save significant energy compared to a conventional vapor compression AC (Kozubal et al. 2011). The purposes of this research were to build DEVAP prototypes, test them to validate the numerical model, and identify potential commercialization barriers.

Bacterial community structures in air conditioners installed in Japanese residential buildings.

PubMed

Hatayama, Kouta; Oikawa, Yurika; Ito, Hiroyuki

2018-01-01

The bacterial community structures in four Japanese split-type air conditioners were analyzed using a next-generation sequencer. A variety of bacteria were detected in the air filter of an air conditioner installed on the first floor. In the evaporator of this air conditioner, bacteria belonging to the genus Methylobacterium, or the family of Sphingomonadaceae, were predominantly detected. On the other hand, the majority of bacteria detected in the air filters and evaporators of air conditioners installed on the fifth and twelfth floors belonged to the family Enterobacteriaceae. The source of bacteria belonging to the family Enterobacteriaceae may have been aerosols generated by toilet flushing in the buildings. Our results suggested the possibility that the bacterial contamination in the air conditioners was affected by the floor level on which they were installed. The air conditioner installed on the lower floor, near the ground, may have been contaminated by a variety of outdoor bacteria, whereas the air conditioners installed on floors more distant from the ground may have been less contaminated by outdoor bacteria. However, these suppositions may apply only to the specific split-type air conditioners that we analyzed, because our sample size was small.

Prototype Facility Educational Specifications.

ERIC Educational Resources Information Center

Idaho State Div. of Professional-Technical Education, Boise.

This document presents prototypical educational specifications to guide the building and renovation of Idaho vocational schools so they can help communities meet the advanced, professional-technical programs of the future. The specifications start with points to consider when determining school site suitability. The document then sets forth…

"A Powerful Protector of the Japanese People": The History of the Japanese Hospital in Steveston, British Columbia, Canada,1896-1942.

PubMed

Vandenberg, Helen

2017-01-01

From 1896 to 1942, a Japanese hospital operated in the village of Steveston, British Columbia, Canada. For the first 4 years, Japanese Methodist missionaries utilized a small mission building as a makeshift hospital, until a larger institution was constructed by the local Japanese Fishermen's Association in 1900. The hospital operated until the Japanese internment, after the attack on Pearl Harbor during World War II. This study offers important commentary about the relationships between health, hospitals, and race in British Columbia during a period of increased immigration and economic upheaval. From the unique perspective of Japanese leaders, this study provides new insight about how Japanese populations negotiated hospital care, despite a context of severe racial discrimination. Japanese populations utilized Christianization, fishing expertise, and hospital work to garner more equitable access to opportunities and resources. This study demonstrates that in addition to providing medical treatment, training grounds for health-care workers, and safe refuge for the sick, hospitals played a significant role in confronting broader racialized inequities in Canada's past.

Mechatronic Prototype of Parabolic Solar Tracker

PubMed Central

Morón, Carlos; Díaz, Jorge Pablo; Ferrández, Daniel; Ramos, Mari Paz

2016-01-01

In the last 30 years numerous attempts have been made to improve the efficiency of the parabolic collectors in the electric power production, although most of the studies have focused on the industrial production of thermoelectric power. This research focuses on the application of this concentrating solar thermal power in the unexplored field of building construction. To that end, a mechatronic prototype of a hybrid paraboloidal and cylindrical-parabolic tracker based on the Arduido technology has been designed. The prototype is able to measure meteorological data autonomously in order to quantify the energy potential of any location. In this way, it is possible to reliably model real commercial equipment behavior before its deployment in buildings and single family houses. PMID:27314359

Developing a Philippine Cancer Grid. Part 1: Building a Prototype for a Data Retrieval System for Breast Cancer Research Using Medical Ontologies

NASA Astrophysics Data System (ADS)

Coronel, Andrei D.; Saldana, Rafael P.

Cancer is a leading cause of morbidity and mortality in the Philippines. Developed within the context of a Philippine Cancer Grid, the present study used web development technologies such as PHP, MySQL, and Apache server to build a prototype data retrieval system for breast cancer research that incorporates medical ontologies from the Unified Medical Language System (UMLS).

Construction and operation of a support facilities (Building 729) for operation/testing of a prototype accelerator/storage ring (XLS) and machine shop for the National Synchrotron Light Source at Brookhaven National Laboratory, Upton, New York. Environmental assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-06-01

Proposed action is to construct at BNL a 5,600-ft{sup 2} support building, install and operate a prototypic 200 MeV accelerator and a prototypic 700 MeV storage ring within, and to construct and operate a 15 kV substation to power the building. The accelerator and storage ring would comprise the x-ray lithography source or XLS.

The Home Depot Upgrades its Corporate Building Prototype

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2013-03-01

The Home Depot partnered with the Department of Energy (DOE) to develop and implement solutions to build new, low-energy buildings that are at least 50% below Standard 90.1-2007 of the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE), the American National Standards Institute (ANSI), and the Illuminating Engineering Society of North America (IESNA) as part of DOE’s Commercial Building Partnerships (CBP) Program.

Hierarchical Task Network Prototyping In Unity3d

DTIC Science & Technology

2016-06-01

visually debug. Here we present a solution for prototyping HTNs by extending an existing commercial implementation of Behavior Trees within the Unity3D game ...HTN, dynamic behaviors, behavior prototyping, agent-based simulation, entity-level combat model, game engine, discrete event simulation, virtual...commercial implementation of Behavior Trees within the Unity3D game engine prior to building the HTN in COMBATXXI. Existing HTNs were emulated within

ECCE Toolkit: Prototyping Sensor-Based Interaction.

PubMed

Bellucci, Andrea; Aedo, Ignacio; Díaz, Paloma

2017-02-23

Building and exploring physical user interfaces requires high technical skills and hours of specialized work. The behavior of multiple devices with heterogeneous input/output channels and connectivity has to be programmed in a context where not only the software interface matters, but also the hardware components are critical (e.g., sensors and actuators). Prototyping physical interaction is hindered by the challenges of: (1) programming interactions among physical sensors/actuators and digital interfaces; (2) implementing functionality for different platforms in different programming languages; and (3) building custom electronic-incorporated objects. We present ECCE (Entities, Components, Couplings and Ecosystems), a toolkit for non-programmers that copes with these issues by abstracting from low-level implementations, thus lowering the complexity of prototyping small-scale, sensor-based physical interfaces to support the design process. A user evaluation provides insights and use cases of the kind of applications that can be developed with the toolkit.

Demonstrating a Realistic IP Mission Prototype

NASA Technical Reports Server (NTRS)

Rash, James; Ferrer, Arturo B.; Goodman, Nancy; Ghazi-Tehrani, Samira; Polk, Joe; Johnson, Lorin; Menke, Greg; Miller, Bill; Criscuolo, Ed; Hogie, Keith

2003-01-01

Flight software and hardware and realistic space communications environments were elements of recent demonstrations of the Internet Protocol (IP) mission concept in the lab. The Operating Missions as Nodes on the Internet (OMNI) Project and the Flight Software Branch at NASA/GSFC collaborated to build the prototype of a representative space mission that employed unmodified off-the-shelf Internet protocols and technologies for end-to-end communications between the spacecraft/instruments and the ground system/users. The realistic elements used in the prototype included an RF communications link simulator and components of the TRIANA mission flight software and ground support system. A web-enabled camera connected to the spacecraft computer via an Ethernet LAN represented an on-board instrument creating image data. In addition to the protocols at the link layer (HDLC), transport layer (UDP, TCP), and network (IP) layer, a reliable file delivery protocol (MDP) at the application layer enabled reliable data delivery both to and from the spacecraft. The standard Network Time Protocol (NTP) performed on-board clock synchronization with a ground time standard. The demonstrations of the prototype mission illustrated some of the advantages of using Internet standards and technologies for space missions, but also helped identify issues that must be addressed. These issues include applicability to embedded real-time systems on flight-qualified hardware, range of applicability of TCP, and liability for and maintenance of commercial off-the-shelf (COTS) products. The NASA Earth Science Technology Office (ESTO) funded the collaboration to build and demonstrate the prototype IP mission.

ECCE Toolkit: Prototyping Sensor-Based Interaction

PubMed Central

Bellucci, Andrea; Aedo, Ignacio; Díaz, Paloma

2017-01-01

Building and exploring physical user interfaces requires high technical skills and hours of specialized work. The behavior of multiple devices with heterogeneous input/output channels and connectivity has to be programmed in a context where not only the software interface matters, but also the hardware components are critical (e.g., sensors and actuators). Prototyping physical interaction is hindered by the challenges of: (1) programming interactions among physical sensors/actuators and digital interfaces; (2) implementing functionality for different platforms in different programming languages; and (3) building custom electronic-incorporated objects. We present ECCE (Entities, Components, Couplings and Ecosystems), a toolkit for non-programmers that copes with these issues by abstracting from low-level implementations, thus lowering the complexity of prototyping small-scale, sensor-based physical interfaces to support the design process. A user evaluation provides insights and use cases of the kind of applications that can be developed with the toolkit. PMID:28241502

Experimental Evaluation of a Device Prototype Based on Shape Memory Alloys for the Retrofit of Historical Buildings

NASA Astrophysics Data System (ADS)

Cardone, Donatello; Sofia, Salvatore

2012-12-01

Metallic tie-rods are currently used in many historical buildings for absorbing the out-of-plane horizontal forces of arches, vaults and roof trusses, despite they exhibit several limitations under service and seismic conditions. In this paper, a post-tensioned system based on the superelastic properties of Ni-Ti shape memory alloys is proposed for improving the structural performances of traditional metallic tie-rods. First, the thermal behavior under service conditions is investigated based on the results of numerical and experimental studies. Subsequently, the seismic performances under strong earthquakes are verified trough a number of shaking table tests on a 1:4-scale timber roof truss model. The outcomes of these studies fully confirm the achievement of the design objectives of the proposed prototype device.

Japanese Competitiveness and Japanese Management.

ERIC Educational Resources Information Center

Minabe, Shigeo

1986-01-01

Analyzes and compares Japanese and American industrial policy and labor practices. Proposes that certain aspects of the Japanese system be adapted by American businesses for purpose of increasing international competitiveness. Proposes specific actions and plans for both the Japanese and American systems. (ML)

Report on detailed requirements for the INFLO prototype.

DOT National Transportation Integrated Search

2013-12-01

This report documents the System Requirements for the implementation of the Intelligent Network Flow Optimization (INFLO) Prototype bundle within the Dynamic Mobility Applications (DMA) portion of the Connected Vehicle Program. It builds off of the p...

Is Japanese Education the "Exception"?: Examining the Situated Articulation of Neo-Liberalism through the Analysis of Policy Keywords

ERIC Educational Resources Information Center

Takayama, Keita

2009-01-01

This article builds on the author's earlier work, published in Vol. 28 No. 1 of this journal, that critiqued the Orientalist legacy in Anglo-American discussions of Japanese education. One of the manifestations of this legacy is the prevailing view among the Anglo-American observers of Japanese education that Japanese education is the…

Utilizing Rapid Prototyping for Architectural Modeling

ERIC Educational Resources Information Center

Kirton, E. F.; Lavoie, S. D.

2006-01-01

This paper will discuss our approach to, success with and future direction in rapid prototyping for architectural modeling. The premise that this emerging technology has broad and exciting applications in the building design and construction industry will be supported by visual and physical evidence. This evidence will be presented in the form of…

Sociocultural dilemma of Japanese steeplejacks.

PubMed

Iwata, H

1997-12-01

Japanese steeplejacks are good at working in high places as construction workers, and they have been called tobi for a longtime. They now play an important role in completing modern civil engineering projects and in the construction of high-rise buildings; however, their lifestyle is considered by most to be quaint but outdated. Originally, they were unskilled workmen at construction sites. In the 18th century, they were engaged in repairing houses or setting up scaffolding, helping carpenters, but they worked as firefighters whenever fires broke out. Their traditional work system did not change throughout the Meiji era, although Japanese society became greatly modernized. After World War II, the industrialization of Japanese society required highly developed technology in civil engineering and architecture. This provided an opportunity for them to establish their positions as trained professional workers. However, the number of skilled tobi professionals has continued to decrease because the younger generation does not consider this profession desirable career. Improving not only the professional skills but also the way of living to the extent as a modern high-tech society demands will be the key for the tobi's work system to become attractive.

Impacts of building geometry modeling methods on the simulation results of urban building energy models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Yixing; Hong, Tianzhen

We present that urban-scale building energy modeling (UBEM)—using building modeling to understand how a group of buildings will perform together—is attracting increasing attention in the energy modeling field. Unlike modeling a single building, which will use detailed information, UBEM generally uses existing building stock data consisting of high-level building information. This study evaluated the impacts of three zoning methods and the use of floor multipliers on the simulated energy use of 940 office and retail buildings in three climate zones using City Building Energy Saver. The first zoning method, OneZone, creates one thermal zone per floor using the target building'smore » footprint. The second zoning method, AutoZone, splits the building's footprint into perimeter and core zones. A novel, pixel-based automatic zoning algorithm is developed for the AutoZone method. The third zoning method, Prototype, uses the U.S. Department of Energy's reference building prototype shapes. Results show that simulated source energy use of buildings with the floor multiplier are marginally higher by up to 2.6% than those modeling each floor explicitly, which take two to three times longer to run. Compared with the AutoZone method, the OneZone method results in decreased thermal loads and less equipment capacities: 15.2% smaller fan capacity, 11.1% smaller cooling capacity, 11.0% smaller heating capacity, 16.9% less heating loads, and 7.5% less cooling loads. Source energy use differences range from -7.6% to 5.1%. When comparing the Prototype method with the AutoZone method, source energy use differences range from -12.1% to 19.0%, and larger ranges of differences are found for the thermal loads and equipment capacities. This study demonstrated that zoning methods have a significant impact on the simulated energy use of UBEM. Finally, one recommendation resulting from this study is to use the AutoZone method with floor multiplier to obtain accurate results while

Impacts of building geometry modeling methods on the simulation results of urban building energy models

DOE PAGES

Chen, Yixing; Hong, Tianzhen

2018-02-20

We present that urban-scale building energy modeling (UBEM)—using building modeling to understand how a group of buildings will perform together—is attracting increasing attention in the energy modeling field. Unlike modeling a single building, which will use detailed information, UBEM generally uses existing building stock data consisting of high-level building information. This study evaluated the impacts of three zoning methods and the use of floor multipliers on the simulated energy use of 940 office and retail buildings in three climate zones using City Building Energy Saver. The first zoning method, OneZone, creates one thermal zone per floor using the target building'smore » footprint. The second zoning method, AutoZone, splits the building's footprint into perimeter and core zones. A novel, pixel-based automatic zoning algorithm is developed for the AutoZone method. The third zoning method, Prototype, uses the U.S. Department of Energy's reference building prototype shapes. Results show that simulated source energy use of buildings with the floor multiplier are marginally higher by up to 2.6% than those modeling each floor explicitly, which take two to three times longer to run. Compared with the AutoZone method, the OneZone method results in decreased thermal loads and less equipment capacities: 15.2% smaller fan capacity, 11.1% smaller cooling capacity, 11.0% smaller heating capacity, 16.9% less heating loads, and 7.5% less cooling loads. Source energy use differences range from -7.6% to 5.1%. When comparing the Prototype method with the AutoZone method, source energy use differences range from -12.1% to 19.0%, and larger ranges of differences are found for the thermal loads and equipment capacities. This study demonstrated that zoning methods have a significant impact on the simulated energy use of UBEM. Finally, one recommendation resulting from this study is to use the AutoZone method with floor multiplier to obtain accurate results while

Telling her story: narrating a Japanese lesbian community.

PubMed

Welker, James

2010-01-01

This article explores queer Japanese women's narratives of their own histories and the history of the "Japanese lesbian community," which has been constructed as a space outside the heterosexual mainstream, a space where queer women can find at least temporary refuge. It begins with the acknowledgment that the evolution and the shape of the community, along with the identities of the women who comprise it, are shifting and contested. This article specifically looks at the long history of the lesbian bar scene as well as more recent history of lesbian dance parties; the early role of lesbian feminism and activism; lesbian community-based and commercial publications, paying special attention to the critical role translation has played in Japanese lesbian discourse and the construction of multiple lesbian identities; and, finally, lesbian, gay, bisexual, and transgender (LGBT) pride events and film festivals, through which the larger LGBT community has been gaining increasing visibility. This article argues that while some of the building blocks of the community are borrowed, from the "West" as well as from the Japanese gay community, there has also been creative translation, adaptation, and resistance to these imports. The resulting Japanese lesbian community is a complex and local construct, an innovative bricolage firmly sited in Japan.

Scalable Deployment of Advanced Building Energy Management Systems

DTIC Science & Technology

2013-06-01

Building Automation and Control Network BDAS Building Data Acquisition System BEM building energy model BIM building information modeling BMS...A prototype toolkit to seamlessly and automatically transfer a Building Information Model ( BIM ) to a Building Energy Model (BEM) has been...circumvent the need to manually construct and maintain a detailed building energy simulation model . This detailed

Are Americans more successful at building intercultural relations than Japanese? A comparison and analysis of acculturation outcomes in Japan.

PubMed

Komisarof, Adam

2014-01-01

Various Western and Japanese sources in the literature have concluded that Japanese people, who live in a nation with comparatively less ethnocultural diversity than the U.S., lag behind Americans in their capabilities to develop positive intercultural relations. To test these assumptions, this study compared the quality of acculturation outcomes between Japanese and Americans in Japan. Japanese and American scores were calculated for five dependent measures used to operationalize quality of intercultural relations. Four dependent variables revealed no significant differences. For the variable of organizational investiture, Japanese had significantly higher scores, so data were analyzed to discern why.

Ground Systems Development Environment (GSDE) interface requirements and prototyping plan

NASA Technical Reports Server (NTRS)

Church, Victor E.; Philips, John; Bassman, Mitchell; Williams, C.

1990-01-01

This report describes the data collection and requirements analysis effort of the Ground System Development Environment (GSDE) Interface Requirements study. It identifies potential problems in the interfaces among applications and processors in the heterogeneous systems that comprises the GSDE. It describes possible strategies for addressing those problems. It also identifies areas for further research and prototyping to demonstrate the capabilities and feasibility of those strategies and defines a plan for building the necessary software prototypes.

Sunao (Cooperative) Children: How Japanese Teachers Nurture Autonomy

ERIC Educational Resources Information Center

Izumi-Taylor, Satomi

2008-01-01

The author discusses the Japanese cultural concept of sunao (perhaps best translated as one's honest, gentle, cooperative nature) in relation to early childhood education in Japan. She explains the cultural belief that during early childhood, children need to learn to connect with one another and build a willingness and capacity to live…

Prototype Systems for Measuring Outdoor Air Intake Rates in Rooftop Air Handlers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fisk, William J.; Chan, Wanyu R.; Hotchi, Toshifumi

2015-01-01

The widespread absence of systems for real-time measurement and feedback control, of minimum outdoor air intake rates in HVAC systems contributes to the poor control of ventilation rates in commercial buildings. Ventilation rates affect building energy consumption and influence occupant health. The project designed fabricated and tested four prototypes of systems for measuring rates of outdoor air intake into roof top air handlers. All prototypes met the ±20% accuracy target at low wind speeds, with all prototypes accurate within approximately ±10% after application of calibration equations. One prototype met the accuracy target without a calibration. With two of four prototypemore » measurement systems, there was no evidence that wind speed or direction affected accuracy; however, winds speeds were generally below usually 3.5 m s -1 (12.6 km h -1) and further testing is desirable. The airflow resistance of the prototypes was generally less than 35 Pa at maximum RTU air flow rates. A pressure drop of this magnitude will increase fan energy consumption by approximately 4%. The project did not have resources necessary to estimate costs of mass produced systems. The retail cost of components and materials used to construct prototypes ranged from approximately $1,200 to $1,700. The test data indicate that the basic designs developed in this project, particularly the designs of two of the prototypes, have considerable merit. Further design refinement, testing, and cost analysis would be necessary to fully assess commercial potential. The designs and test results will be communicated to the HVAC manufacturing community.« less

Public Flat in Indonesia, Their Role in Highly Densed City: Legal Aspect Review and Prototype Assessment

NASA Astrophysics Data System (ADS)

Paramita, Beta; Perdana Khidmat, Rendy; Fukuda, Hiroatsu

2018-05-01

An affordable vertical house, which is known as rusun in Indonesian term becomes the utopia of a compact city. The rusun to be the main actor contributing to the creation of liveable comfort in dense areas by relocating squatters and slum inhabitants to better living places. Technical guidelines and building standards play a major role in a building’s environmental impact. These standards will be reviewed based on their impact on building performance. There are two prototypes of rusun referenced in 05/PRT/M/2007, and the assessment of these prototypes has been done by using ENVi-met. The meteorological data for the ENVI-met configuration input is adapted to the same weather and climate conditions taken from the data measured on June 13th, 2012. The analysis of this assessment will focus on building orientation, building length, building height, and also the microclimate which is impacted by these prototypes. Based on the assessment, it is recommended that the layout of outdoor space on the north side should provide as much green coverage as possible, either for shadowing or for the benefit of its albedo. The simulation shows that building ratio of 1:3 produces higher wind speed, which also controls air temperature and humidity.

Teaching Reflective Care in Japanese Early Childhood Settings

ERIC Educational Resources Information Center

Hellman, Anette

2016-01-01

The purpose of this article is to explore the way preschool teachers teach reflective care in Japan. The article builds on a two-month ethnographic study conducted in Japanese kindergartens and nurseries among children aged 3-6 years. The data were analysed using concepts of age and gender. The results show that care in Japan, in contrast to…

2. OVERALL VIEW OF GERMAN VILLAGE LOOKING SOUTHWEST TOWARD BUILDING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. OVERALL VIEW OF GERMAN VILLAGE LOOKING SOUTHWEST TOWARD BUILDING T-8100. BUNKER, BUILDING T-8104, IN FOREGROUND. - Dugway Proving Ground, German-Japanese Village, German Village, South of Stark Road, in WWII Incendiary Test Area, Dugway, Tooele County, UT

Rapid Prototyping Integrated With Nondestructive Evaluation and Finite Element Analysis

NASA Technical Reports Server (NTRS)

Abdul-Aziz, Ali; Baaklini, George Y.

2001-01-01

Most reverse engineering approaches involve imaging or digitizing an object then creating a computerized reconstruction that can be integrated, in three dimensions, into a particular design environment. Rapid prototyping (RP) refers to the practical ability to build high-quality physical prototypes directly from computer aided design (CAD) files. Using rapid prototyping, full-scale models or patterns can be built using a variety of materials in a fraction of the time required by more traditional prototyping techniques (refs. 1 and 2). Many software packages have been developed and are being designed to tackle the reverse engineering and rapid prototyping issues just mentioned. For example, image processing and three-dimensional reconstruction visualization software such as Velocity2 (ref. 3) are being used to carry out the construction process of three-dimensional volume models and the subsequent generation of a stereolithography file that is suitable for CAD applications. Producing three-dimensional models of objects from computed tomography (CT) scans is becoming a valuable nondestructive evaluation methodology (ref. 4). Real components can be rendered and subjected to temperature and stress tests using structural engineering software codes. For this to be achieved, accurate high-resolution images have to be obtained via CT scans and then processed, converted into a traditional file format, and translated into finite element models. Prototyping a three-dimensional volume of a composite structure by reading in a series of two-dimensional images generated via CT and by using and integrating commercial software (e.g. Velocity2, MSC/PATRAN (ref. 5), and Hypermesh (ref. 6)) is being applied successfully at the NASA Glenn Research Center. The building process from structural modeling to the analysis level is outlined in reference 7. Subsequently, a stress analysis of a composite cooling panel under combined thermomechanical loading conditions was performed to validate

Preliminary work toward the development of a dimensional tolerance standard for rapid prototyping

NASA Technical Reports Server (NTRS)

Kennedy, W. J.

1996-01-01

Rapid prototyping is a new technology for building parts quickly from CAD models. It works by slicing a CAD model into layers, then by building a model of the part one layer at a time. Since most parts can be sliced, most parts can be modeled using rapid prototyping. The layers themselves are created in a number of different ways - by using a laser to cure a layer of an epoxy or a resin, by depositing a layer of plastic or wax upon a surface, by using a laser to sinter a layer of powder, or by using a laser to cut a layer of paper. Rapid prototyping (RP) is new, and a standard part for use in comparing dimensional tolerances has not yet been chosen and accepted by ASTM (the American Society for Testing Materials). Such a part is needed when RP is used to build parts for investment casting or for direct use. The objective of this project was to start the development of a standard part by using statistical techniques to choose the features of the part which show curl - the vertical deviation of a part from its intended horizontal plane.

Handling Japanese without a Japanese Operating System.

ERIC Educational Resources Information Center

Hatasa, Kazumi; And Others

1992-01-01

The Macintosh HyperCard environment has become a popular platform for Japanese language courseware because of its flexibility and ease of programing. This project created Japanese bitmap font files for the JIS Levels 1 and 2, and writing XFCNs for font manipulation, Japanese kana input, and answer correction. (12 references) (Author/LB)

Ares I-X Ground Diagnostic Prototype

NASA Technical Reports Server (NTRS)

Schwabacher, Mark A.; Martin, Rodney Alexander; Waterman, Robert D.; Oostdyk, Rebecca Lynn; Ossenfort, John P.; Matthews, Bryan

2010-01-01

The automation of pre-launch diagnostics for launch vehicles offers three potential benefits: improving safety, reducing cost, and reducing launch delays. The Ares I-X Ground Diagnostic Prototype demonstrated anomaly detection, fault detection, fault isolation, and diagnostics for the Ares I-X first-stage Thrust Vector Control and for the associated ground hydraulics while the vehicle was in the Vehicle Assembly Building at Kennedy Space Center (KSC) and while it was on the launch pad. The prototype combines three existing tools. The first tool, TEAMS (Testability Engineering and Maintenance System), is a model-based tool from Qualtech Systems Inc. for fault isolation and diagnostics. The second tool, SHINE (Spacecraft Health Inference Engine), is a rule-based expert system that was developed at the NASA Jet Propulsion Laboratory. We developed SHINE rules for fault detection and mode identification, and used the outputs of SHINE as inputs to TEAMS. The third tool, IMS (Inductive Monitoring System), is an anomaly detection tool that was developed at NASA Ames Research Center. The three tools were integrated and deployed to KSC, where they were interfaced with live data. This paper describes how the prototype performed during the period of time before the launch, including accuracy and computer resource usage. The paper concludes with some of the lessons that we learned from the experience of developing and deploying the prototype.

Shaking table test and dynamic response prediction on an earthquake-damaged RC building

NASA Astrophysics Data System (ADS)

Xianguo, Ye; Jiaru, Qian; Kangning, Li

2004-12-01

This paper presents the results from shaking table tests of a one-tenth-scale reinforced concrete (RC) building model. The test model is a protype of a building that was seriously damaged during the 1985 Mexico earthquake. The input ground excitation used during the test was from the records obtained near the site of the prototype building during the 1985 and 1995 Mexico earthquakes. The tests showed that the damage pattern of the test model agreed well with that of the prototype building. Analytical prediction of earthquake response has been conducted for the prototype building using a sophisticated 3-D frame model. The input motion used for the dynamic analysis was the shaking table test measurements with similarity transformation. The comparison of the analytical results and the shaking table test results indicates that the response of the RC building to minor and the moderate earthquakes can be predicated well. However, there is difference between the predication and the actual response to the major earthquake.

A computerized tutor prototype for prostate cryotherapy: key building blocks and system evaluation

NASA Astrophysics Data System (ADS)

Rabin, Yoed; Shimada, Kenji; Joshi, Purva; Sehrawat, Anjali; Keelan, Robert; Wilfong, Dona M.; McCormick, James T.

2017-02-01

This paper focuses on the evaluation of a prototype for a computer-based tutoring system for prostate cryosurgery, while reviewing its key building blocks and their benchmark performance. The tutoring system lists geometrical constraints of cryoprobe placement, displays a rendered shape of the prostate, simulates cryoprobe insertion, enables distance measurements, simulates the corresponding thermal history, and evaluates the mismatch between the target region shape and a pre-selected planning isotherm. The quality of trainee planning is measured in comparison with a computergenerated plan, created for each case study by a previously developed planning algorithm, known as bubble-packing. While the tutoring level in this study aims only at geometrical constraints on cryoprobe placement and the resulting thermal history, it creates a unique opportunity to gain insight into the process outside of the operation room. System validation of the tutor has been performed by collecting training data from surgical residents, having no prior experience or advanced knowledge of cryotherapy. Furthermore, the system has been evaluated by graduate engineering students having no formal education in medicine. In terms of match between a planning isotherm and the target region shape, results demonstrate medical residents' performance improved from 4.4% in a pretest to 37.8% in a posttest over a course of 50 minutes of training (within 10% margins from a computer-optimized plan). Comparing those results with the performance of engineering students indicates similar results, suggesting that planning of the cryoprobe layout essentially revolves around geometric considerations.

The Uniqueness of EFL Teachers: Perceptions of Japanese Learners

ERIC Educational Resources Information Center

Lee, Joseph J.

2010-01-01

Building on the work of Borg (2006), this article reports on a study of Japanese English as a foreign language (EFL) learners' perceptions of some of the unique characteristics of EFL teachers that distinguish them from teachers of other subjects. The data were collected by means of a questionnaire to which 163 college-level EFL students in Japan…

Prototype of sun projector device

NASA Astrophysics Data System (ADS)

Ihsan; Dermawan, B.

2016-11-01

One way to introduce astronomy to public, including students, can be handled by solar observation. The widely held device for this purpose is coelostat and heliostat. Besides using filter attached to a device such as telescope, it is safest to use indirect way for observing the Sun. The main principle of the indirect way is deflecting the sun light and projecting image of the sun on a screen. We design and build a simple and low-cost astronomical device, serving as a supplement to increase public service, especially for solar observation. Without using any digital and intricate supporting equipment, people can watch and relish image of the Sun in comfortable condition, i.e. in a sheltered or shady place. Here we describe a design and features of our prototype of the device, which still, of course, has some limitations. In the future, this prototype can be improved for more efficient and useful applications.

PhoneSat: Ground Testing of a Phone-Based Prototype Bus

NASA Technical Reports Server (NTRS)

Felix, Carmen; Howard, Benjamin; Reyes, Matthew; Snarskiy, Fedor; Hickman, Ryan; Boshuizen, Christopher; Marshall, William

2010-01-01

Most of the key capabilities that are requisite of a satellite bus are housed in today's smart phones. PhoneSat refers to an initiative to build a ground-based prototype vehicle that could all the basic functionality of a satellite, including attitude control, using a smart Phone as its central hardware. All components used were also low cost Commercial off the Shelf (COTS). In summer 2009, an initial prototype was created using the LEGO Mindstorm toolkit demonstrating simple attitude control. Here we report on a follow up initiative to design, build and test a vehicle based on the Google s smart phone Nexus One. The report includes results from initial thermal-vacuum chamber tests and low altitude sub-orbital rocket flights which show that, at least for short durations, the Nexus One phone is able to withstand key aspects of the space environment without failure. We compare the sensor data from the Phone's accelerometers and magnetometers with that of an external microelectronic inertial measurement unit.

Bedtime Stories in English: Field-Testing Comprehensible Input Materials for Natural Second-Language Acquisition in Japanese Pre-School Children

ERIC Educational Resources Information Center

Hamilton, Robert

2014-01-01

In this study, the prototype of a new type of bilingual picture book was field-tested with two sets of mother-son subject pairs. This picture book was designed as a possible tool for providing children with comprehensible input during their critical period for second language acquisition. Context is provided by visual cues and both Japanese and…

Japanese suppliers in transition from domestic nuclear reactor vendors to international suppliers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Forsberg, C.W.; Reich, W.J.; Rowan, W.J.

1994-06-27

Japan is emerging as a major leader and exporter of nuclear power technology. In the 1990s, Japan has the largest and strongest nuclear power supply industry worldwide as a result of the largest domestic nuclear power plant construction program. The Japanese nuclear power supply industry has moved from dependence on foreign technology to developing, design, building, and operating its own power plants. This report describes the Japanese nuclear power supply industry and examines one supplier--the Mitsubishi group--to develop an understanding of the supply industry and its relationship to the utilities, government, and other organizations.

Digital Microdroplet Ejection Technology-Based Heterogeneous Objects Prototyping

PubMed Central

Yang, Jiquan; Feng, Chunmei; Yang, Jianfei; Zhu, Liya; Guo, Aiqing

2016-01-01

An integrate fabrication framework is presented to build heterogeneous objects (HEO) using digital microdroplets injecting technology and rapid prototyping. The heterogeneous materials part design and manufacturing method in structure and material was used to change the traditional process. The net node method was used for digital modeling that can configure multimaterials in time. The relationship of material, color, and jetting nozzle was built. The main important contributions are to combine the structure, material, and visualization in one process and give the digital model for manufacture. From the given model, it is concluded that the method is effective for HEO. Using microdroplet rapid prototyping and the model given in the paper HEO could be gotten basically. The model could be used in 3D biomanufacturing. PMID:26981110

Digital Microdroplet Ejection Technology-Based Heterogeneous Objects Prototyping.

PubMed

Li, Na; Yang, Jiquan; Feng, Chunmei; Yang, Jianfei; Zhu, Liya; Guo, Aiqing

2016-01-01

An integrate fabrication framework is presented to build heterogeneous objects (HEO) using digital microdroplets injecting technology and rapid prototyping. The heterogeneous materials part design and manufacturing method in structure and material was used to change the traditional process. The net node method was used for digital modeling that can configure multimaterials in time. The relationship of material, color, and jetting nozzle was built. The main important contributions are to combine the structure, material, and visualization in one process and give the digital model for manufacture. From the given model, it is concluded that the method is effective for HEO. Using microdroplet rapid prototyping and the model given in the paper HEO could be gotten basically. The model could be used in 3D biomanufacturing.

Molecular identification of enteroviruses including two new types (EV-98 and EV-107) isolated from Japanese travellers from Asian countries.

PubMed

Yamashita, Teruo; Ito, Miyabi; Tsuzuki, Hideaki; Sakae, Kenji; Minagawa, Hiroko

2010-04-01

Of 58 enterovirus strains isolated from Japanese travellers returning from Asian countries, eight were non-serotypable with existing antisera. By sequencing a part of the VP1 region, six of these strains were typed as echovirus 9, enterovirus (EV)-73, EV-79 or EV-97. The nucleotide identity of the VP1 region of isolate T92-1499 to all enterovirus prototypes was <70 %. The VP1 sequence of isolate TN94-0349 was closely related to coxsackievirus (CV)-A9 (73.3 % nucleotide identity), but the virus could not be neutralized with a serum raised against the prototype CV-A9 strain. On the basis of complete molecular comparisons, T92-1499 and TN94-0349 were identified as EV-98 and EV-107, respectively, by the ICTV Picornavirus Study Group. Serum neutralization tests of Japanese individuals revealed a seroprevalence rate of 11 % for EV-73, and even lower seroprevalence rates, 1.0-3.8 %, were found for the other new enteroviruses, suggesting that prior circulation of these viruses in Japan was unlikely.

Do American born Japanese children still grow faster than native Japanese?

PubMed

Kano, K; Chung, C S

1975-09-01

Growth patterns of Japanese schoolchildren in Hawaii, composed of 2,954 boys and 3,213 girls aged between 11 and 17, were compared with those comparable groups of Japanese schoolchildren in Japan based on the data published by the Japanese Ministry of Education. Growth characteristics studied were height, weight, and relative weight index, weight/(height). The Hawaii-Japanese boys were taller at early ages but the difference disappeared by age 16. Native Japanese girls were shorter than Hawaii-Japanese until age 13, but they overtook the latter by age 14, exceeding them in height after age 15. A similar pattern was found in weights of girls but the Hawaii-Japanese boys remained consistently heavier by 5.0 to 9.0 kg than native Japanese. The relative weight measure indicated that the Hawaii boys were more "obese" than native Japanese boys for the growth period studied; whereas the same tendency was maintained until age 15 in girls. These observations indicate a marked degree of convergence of the patterns of physical growth of the two populations, whose differences were unmistakably in favor of American born children in earlier studies. It is concluded that the convergence is due largely to the improved environmental conditions in Japan in recent years.

10 CFR 434.516 - Building exterior envelope.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Prototype and Reference Buildings, the infiltration assumptions in subsection 516.2.1 shall be prescribed.... Infiltration shall impact perimeter zones only. 516.2.1When the HVAC system is switched “on,” no infiltration shall be assumed. When the HVAC system is switched “off,” the infiltration rate for buildings with or...

10 CFR 434.516 - Building exterior envelope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Prototype and Reference Buildings, the infiltration assumptions in subsection 516.2.1 shall be prescribed.... Infiltration shall impact perimeter zones only. 516.2.1When the HVAC system is switched “on,” no infiltration shall be assumed. When the HVAC system is switched “off,” the infiltration rate for buildings with or...

10 CFR 434.516 - Building exterior envelope.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Prototype and Reference Buildings, the infiltration assumptions in subsection 516.2.1 shall be prescribed.... Infiltration shall impact perimeter zones only. 516.2.1When the HVAC system is switched “on,” no infiltration shall be assumed. When the HVAC system is switched “off,” the infiltration rate for buildings with or...

10 CFR 434.516 - Building exterior envelope.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Prototype and Reference Buildings, the infiltration assumptions in subsection 516.2.1 shall be prescribed.... Infiltration shall impact perimeter zones only. 516.2.1When the HVAC system is switched “on,” no infiltration shall be assumed. When the HVAC system is switched “off,” the infiltration rate for buildings with or...

Japaneseplex: A forensic SNP assay for identification of Japanese people using Japanese-specific alleles.

PubMed

Yuasa, Isao; Akane, Atsushi; Yamamoto, Toshimichi; Matsusue, Aya; Endoh, Minoru; Nakagawa, Mayumi; Umetsu, Kazuo; Ishikawa, Takaki; Iino, Morio

2018-04-24

It is sometimes necessary to determine whether a forensic biological sample came from a Japanese person. In this study, we developed a 60-locus SNP assay designed for the differentiation of Japanese people from other East Asians using entirely and nearly Japanese-specific alleles. This multiplex assay consisted of 6 independent PCR reactions followed by single nucleotide extension. The average number and standard deviation of Japanese-specific alleles possessed by an individual were 0.81 ± 0.93 in 108 Koreans from Seoul, 8.87 ± 2.89 in 103 Japanese from Tottori, 17.20 ± 3.80 in 88 Japanese from Okinawa, and 0 in 220 Han Chinese from Wuxi and Changsha. The Koreans had 0-4 Japanese-specific alleles per individual, whereas the Japanese had 4-26 Japanese-specific alleles. Almost all Japanese were distinguished from the Koreans and other people by the factorial correspondence and principal component analyses. The Snipper program was also useful to estimate the degree of Japaneseness. The method described here was successfully applied to the differentiation of Japanese from non-Japanese people in forensic cases. This Japanese-specific SNP assay was named Japaneseplex. Copyright © 2018 Elsevier B.V. All rights reserved.

Socialization of Japanese nursing students.

PubMed

Condon, Eileen; Sharts-Hopko, Nancy

2010-01-01

An important focus of nursing education research is the acquisition of values, behaviors, and attitudes that will influence a nurse's professional role. In this qualitative study, the process of professional socialization among Japanese nursing students was investigated. Interviews with nursing students and faculty members in Tokyo revealed that socialization of nursing students is a multidimensional process, with classroom experiences, clinical practice, and extracurricular elements all having an influence. Six themes emerged from the data: openness to others, communication, team building, reflection, extracurricular networking, and focused education. Although communication and clinical experiences are limited by cultural norms, students become socialized to the nursing profession through various other means.

[Understanding the symbolic values of Japanese onomatopoeia: comparison of Japanese and Chinese speakers].

PubMed

Haryu, Etsuko; Zhao, Lihua

2007-10-01

Do non-native speakers of the Japanese language understand the symbolic values of Japanese onomatopoeia matching a voiced/unvoiced consonant with a big/small sound made by a big/small object? In three experiments, participants who were native speakers of Japanese, Japanese-learning Chinese, or Chinese without knowledge of the Japanese language were shown two pictures. One picture was of a small object making a small sound, such as a small vase being broken, and the other was of a big object making a big sound, such as a big vase being broken. Participants were presented with two novel onomatopoetic words with voicing contrasts, e.g.,/dachan/vs./tachan/, and were told that each word corresponded to one of the two pictures. They were then asked to match the words to the corresponding pictures. Chinese without knowledge of Japanese performed only at chance level, whereas Japanese and Japanese-learning Chinese successfully matched a voiced/unvoiced consonant with a big/small object respectively. The results suggest that the key to understanding the symbolic values of voicing contrasts in Japanese onomatopoeia is some basic knowledge that is intrinsic to the Japanese language.

The Japanese Mind: Understanding Contemporary Japanese Culture.

ERIC Educational Resources Information Center

Davies, Roger J., Ed.; Ikeno, Osamu, Ed.

This collection of essays offers an overview of contemporary Japanese culture, and can serve as a resource for classes studying Japan. The 28 essays offer an informative, accessible look at the values, attitudes, behavior patterns, and communication styles of modern Japan from the unique perspective of the Japanese people. Filled with examples…

Relationship-Building Skills of Child-Rearing Mothers in Japanese Communities

PubMed Central

Matsuda, Nobuko; Hirano, Michiyo; Saeki, Kazuko

2016-01-01

This study elucidated the skills of mothers who used to build positive interpersonal relationships with people they met through child-rearing. The research method was qualitative descriptive study. The participants were 24 mothers who had children between ages of one and four years. These participants were recruited at child-rearing salons and childcare centers located in various municipalities in Japan. The survey period was from September 2013 to July 2014. The mothers' interpersonal relationship-building skills were described by six categories: “ability to strive for new encounters,” “ability to try to interact socially with others,” “ability to choose compatible people,” “ability to continuously maintain good relationships,” “ability to take action suitable to a situation,” and “ability to build positive relationships with parents-in-law.” Cognitive aspects of assessing and understanding the interactions that occur during exchanges and behavioral aspects guided by these cognitions were identified within these skills. This study contributed to providing a framework to understand mothers' interpersonal relationship-building skills for public health nurses involved in child-rearing support. PMID:27429804

A molecular level prototype for mechanoelectrical transducer in mammalian hair cells

PubMed Central

Park, Jinkyoung

2013-01-01

The mechanoelectrical transducer (MET) is a crucial component of mammalian auditory system. The gating mechanism of the MET channel remains a puzzling issue, though there are many speculations, due to the lack of essential molecular building blocks. To understand the working principle of mammalian MET, we propose a molecular level prototype which constitutes a charged blocker, a realistic ion channel and its surrounding membrane. To validate the proposed prototype, we make use of a well-established ion channel theory, the Poisson-Nernst-Planck equations, for three-dimensional (3D) numerical simulations. A wide variety of model parameters, including bulk ion concentration, applied external voltage, blocker charge and blocker displacement, are explored to understand the basic function of the proposed MET prototype. We show that our prototype prediction of channel open probability in response to blocker relative displacement is in a remarkable accordance with experimental observation of rat cochlea outer hair cells. Our results appear to suggest that tip links which connect hair bundles gate MET channels. PMID:23625048

What Is Business Japanese? Designing a Japanese Course for Business Communication.

ERIC Educational Resources Information Center

Koike, Shohei

Experiences in developing "Business Japanese" courses for the undergraduate major in Language and International Trade at Eastern Michigan University are described. In 1987, six new courses in Japanese were proposed so that Japanese could be offered as a language specialty in the program. Issues considered in defining business Japanese…

A Confirmatory Model for Substance Use Among Japanese American and Part-Japanese American Adolescents

PubMed Central

Williams, John Kino Yamaguchi; Else, 'Iwalani R. N.; Goebert, Deborah A.; Nishimura, Stephanie T.; Hishinuma, Earl S.; Andrade, Naleen N.

2013-01-01

Few studies have examined the effect of ethnicity and cultural identity on substance use among Asian and Pacific Islander adolescents. A cross-sequential study conducted in Hawai'i with 144 Japanese American and part-Japanese American adolescents assessed a model integrating Japanese ethnicity, cultural identity, substance use, major life events, and social support. Japanese American adolescents scored higher on the Japanese Culture Scale and on the Peers’ Social Support than the part-Japanese American adolescents. Significant associations for substance use and impairment included culturally intensified events and Japanese cultural identity- behavior subset. Models had good overall fits and suggested that conflict surrounding cultural identity may contribute to substance use. PMID:23480213

DEEP: A Database of Energy Efficiency Performance to Accelerate Energy Retrofitting of Commercial Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoon Lee, Sang; Hong, Tianzhen; Sawaya, Geof

The paper presents a method and process to establish a database of energy efficiency performance (DEEP) to enable quick and accurate assessment of energy retrofit of commercial buildings. DEEP was compiled from results of about 35 million EnergyPlus simulations. DEEP provides energy savings for screening and evaluation of retrofit measures targeting the small and medium-sized office and retail buildings in California. The prototype building models are developed for a comprehensive assessment of building energy performance based on DOE commercial reference buildings and the California DEER prototype buildings. The prototype buildings represent seven building types across six vintages of constructions andmore » 16 California climate zones. DEEP uses these prototypes to evaluate energy performance of about 100 energy conservation measures covering envelope, lighting, heating, ventilation, air-conditioning, plug-loads, and domestic hot water. DEEP consists the energy simulation results for individual retrofit measures as well as packages of measures to consider interactive effects between multiple measures. The large scale EnergyPlus simulations are being conducted on the super computers at the National Energy Research Scientific Computing Center of Lawrence Berkeley National Laboratory. The pre-simulation database is a part of an on-going project to develop a web-based retrofit toolkit for small and medium-sized commercial buildings in California, which provides real-time energy retrofit feedback by querying DEEP with recommended measures, estimated energy savings and financial payback period based on users’ decision criteria of maximizing energy savings, energy cost savings, carbon reduction, or payback of investment. The pre-simulated database and associated comprehensive measure analysis enhances the ability to performance assessments of retrofits to reduce energy use for small and medium buildings and business owners who typically do not have resources to

Lifestyle constraints, not inadequate nutrition education, cause gap between breakfast ideals and realities among Japanese in Tokyo.

PubMed

Melby, Melissa K; Takeda, Wakako

2014-01-01

Japanese public health nutrition often promotes 'traditional' cuisine. In-depth interviews with 107 Japanese adults were conducted in Tokyo from 2009 to 2011, using free-listing methods to examine dietary ideals and realities to assess the extent to which realities reflect inadequate nutrition education or lifestyle constraints. Ideal-reality gaps were widest for breakfast. Most people reported Japanese ideals: rice and miso soup were prototypical foods. However, breakfast realities were predominantly western (bread-based). While those aged 40-59 were more likely to hold Japanese ideals (P=0.063), they were less likely to achieve them (P=0.007). All those reporting western ideals achieved them on weekdays, while only 64% of those with Japanese ideals achieved them (P<0.001). Partial correlations controlling for age and gender showed achievement of Japanese ideals were positively correlated with proportion of cooking-related housework, and negatively correlated with living standard and income. Ideal menu content was in line with current Japanese nutrition advice, suggesting that more nutrition education may not change dietary ideals or behavior. Participant-reported reasons for ideal-reality discordance demonstrate that work-life balance issues, especially lack of time and family structure/life rhythm, are the largest obstacles to the attainment of dietary ideals. People reporting 'no time' as a primary reason for ideal-reality gaps were less likely to achieve their Japanese ideals (odds ratio=0.212). Time realities of people's lives may undermine educational efforts promoting Japanese breakfasts. When dietary reality/behavior departs from guidelines, it is often assumed that people lack knowledge. If ideals are in line with dietary guidelines, then lack of knowledge is not the likely cause and nutrition education is not the optimal solution. By asking people about the reasons for gaps between their ideals and realities, we can identify barriers and design more

Smart Building. Volume 2: System Description

DTIC Science & Technology

2006-05-01

demonstrated.this technology at the 2002 Winter Olympic Games in Salt Lake City, Utah. The system was installed on a building known as Social Hall Plaza...select the detailed engineering contractors. 3.1.3.8 Sealing the Protective Envelope Due to the type of roof construction on the building there was ...in time to support the Olympics . Prototype testing was completed following the Olympics and additional testing may be performed to better

10 CFR 435.306 - Selecting a life cycle effective proposed building design.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 3 2013-01-01 2013-01-01 false Selecting a life cycle effective proposed building design... Residential Buildings § 435.306 Selecting a life cycle effective proposed building design. In selecting... prototype, has the highest Net Savings or lowest total life cycle costs calculated in compliance with...

10 CFR 435.306 - Selecting a life cycle effective proposed building design.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 3 2014-01-01 2014-01-01 false Selecting a life cycle effective proposed building design... Residential Buildings § 435.306 Selecting a life cycle effective proposed building design. In selecting... prototype, has the highest Net Savings or lowest total life cycle costs calculated in compliance with...

10 CFR 435.306 - Selecting a life cycle effective proposed building design.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 3 2012-01-01 2012-01-01 false Selecting a life cycle effective proposed building design... Residential Buildings § 435.306 Selecting a life cycle effective proposed building design. In selecting... prototype, has the highest Net Savings or lowest total life cycle costs calculated in compliance with...

10 CFR 435.306 - Selecting a life cycle effective proposed building design.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Selecting a life cycle effective proposed building design... Residential Buildings § 435.306 Selecting a life cycle effective proposed building design. In selecting... prototype, has the highest Net Savings or lowest total life cycle costs calculated in compliance with...

Prototypical Concepts and Misconceptions of Plate Tectonic Boundaries

NASA Astrophysics Data System (ADS)

Sibley, D. F.; Patino, L. C.

2003-12-01

Students of geology encounter many prototypical/exemplar concepts* that include representative, but not necessarily defining, features and characteristics. This study of students' prototypical representations of plate tectonic boundaries indicates that their representations are rich sources of information about their misconceptions about plate tectonics. After lectures in plate tectonics and mountain building, 353 students in a general education geology class were asked to draw a continent-continent convergent boundary. For this study, a correct answer is defined as having the major features in correct proportions as depicted in the plate boundary diagrams on the USGS web. Fifty-two percent of the drawings were either incorrect or incomplete such that they could not be interpreted. Only 48% were readily interpretable, and of these 22% drew the boundary correctly, showing a thickening of crust where two continents collide. Thirty-three percent drew the boundary showing concave slabs of continental crust as one might imagine two pieces of firm rubber pushed together on a rigid surface and 45% depicted mountains as one might imagine inverted ice cream cones on a rigid plank. Twenty-one senior class geology majors and graduate students were given the same assignment. Forty-eight percent rendered a correct drawing, whereas 38% drew the same ice cream cone on a plank type picture that 45% of the general education students drew. In a second class of 12 geology majors, only 1 student drew a cross section of a continent-ocean boundary similar to standard representation. Four of 12 drew mountains on the top of continental crust over a subduction zone but did not draw a compensating mass within the crust or lithosphere. Prototypical drawings provide more information about students' concepts than do most multiple-choice questions. For example, sixty-two percent of theses students who drew mountains similar to foam rubber pads pushed together on a desk or ice cream cones on a

3. OVERALL VIEW OF BUNKER LOOKING SOUTHWEST WITH BUILDING T8100 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. OVERALL VIEW OF BUNKER LOOKING SOUTHWEST WITH BUILDING T-8100 IN BACKGROUND. - Dugway Proving Ground, German-Japanese Village, Observation Bunker, South of Stark Road, in WWII Incendiary Test Area, Dugway, Tooele County, UT

Homogamy and Intermarriage of Japanese and Japanese Americans with Whites Surrounding World War II

ERIC Educational Resources Information Center

Ono, Hiromi; Berg, Justin

2010-01-01

Although some sociologists have suggested that Japanese Americans quickly assimilated into mainstream America, scholars of Japanese America have highlighted the heightened exclusion that the group experienced. This study tracked historical shifts in the exclusion level of Japanese and Japanese Americans in the United States surrounding World War…

Teaching Tip: Using Rapid Game Prototyping for Exploring Requirements Discovery and Modeling

ERIC Educational Resources Information Center

Dalal, Nikunj

2012-01-01

We describe the use of rapid game prototyping as a pedagogic technique to experientially explore and learn requirements discovery, modeling, and specification in systems analysis and design courses. Students have a natural interest in gaming that transcends age, gender, and background. Rapid digital game creation is used to build computer games…

Langenbeck's Archives--an international communication forum between Japanese and German surgeons.

PubMed

Kitajima, Masaki; Hiki, Yoshiki

2010-04-01

Japan's first encounter with Western Medicine was in 1543. Japanese doctors were introduced to surgical treatment by Portuguese missionaries who visited Japan mainly to propagate Christianity and trade with Japan. Until that time, Japanese doctors have treated internal diseases by using mainly traditional Chinese medicine and had not experienced modern Western medicine, particularly surgery. In 1639, the Tokugawa shogunate issued the policy of seclusion (national isolation policy) and prohibited contacts with foreign countries except the Netherlands and China. All European culture came into Japan through Dutch traders. Japanese doctors studied medical books written in Dutch, but could not imagine that the original versions had been written by German doctors. Japanese doctors who studied Dutch medicine founded private schools in various places nationwide, prompting the development of Western medicine. In 1868 the Edo shogunate collapsed, and the newly established Meiji government opened Japan to the rest of the world. In an effort to introduce European civilization, which had been closed to the Japanese under the 250 years, the Meiji government followed Western styles when framing policy and building social systems. In terms of medicine, for the sake of reaching the world's highest level, the government decided to learn from Germans. Many of the young Japanese doctors travelled to Germany. However, as a world war loomed ahead, interchange with foreign countries became difficult. Peace was threatened, and even the progress of science was impeded. Although the United States led the world in the medical field, some Japanese doctors still studied in Germany after World War II to learn their medical traditions and look at the starting point of clinical medicine; and they continued the interchange between Japan and Germany. While continuing active relationship, in 1990, the German and Japanese Surgical Societies was established, and planned to hold a triennial joint

Development of prototype decision support systems for real-time freeway traffic routing. Volume I.

DOT National Transportation Integrated Search

1998-01-01

For a traffic management system (TMS) to improve traffic flow, TMS operators must develop effective routing strategies based on the data collected by the system. The purpose of this research was to build prototype decision support systems (DSS) for t...

Prototyping Control and Data Acquisition for the ITER Neutral Beam Test Facility

NASA Astrophysics Data System (ADS)

Luchetta, Adriano; Manduchi, Gabriele; Taliercio, Cesare; Soppelsa, Anton; Paolucci, Francesco; Sartori, Filippo; Barbato, Paolo; Breda, Mauro; Capobianco, Roberto; Molon, Federico; Moressa, Modesto; Polato, Sandro; Simionato, Paola; Zampiva, Enrico

2013-10-01

The ITER Neutral Beam Test Facility will be the project's R&D facility for heating neutral beam injectors (HNB) for fusion research operating with H/D negative ions. Its mission is to develop technology to build the HNB prototype injector meeting the stringent HNB requirements (16.5 MW injection power, -1 MeV acceleration energy, 40 A ion current and one hour continuous operation). Two test-beds will be built in sequence in the facility: first SPIDER, the ion source test-bed, to optimize the negative ion source performance, second MITICA, the actual prototype injector, to optimize ion beam acceleration and neutralization. The SPIDER control and data acquisition system is under design. To validate the main architectural choices, a system prototype has been assembled and performance tests have been executed to assess the prototype's capability to meet the control and data acquisition system requirements. The prototype is based on open-source software frameworks running under Linux. EPICS is the slow control engine, MDSplus is the data handler and MARTe is the fast control manager. The prototype addresses low and high-frequency data acquisition, 10 kS/s and 10 MS/s respectively, camera image acquisition, data archiving, data streaming, data retrieval and visualization, real time fast control with 100 μs control cycle and supervisory control.

Clinical Ethics Consultation: Examining how American and Japanese experts analyze an Alzheimer's case

PubMed Central

Nagao, Noriko; Aulisio, Mark P; Nukaga, Yoshio; Fujita, Misao; Kosugi, Shinji; Youngner, Stuart; Akabayashi, Akira

2008-01-01

Background Few comparative studies of clinical ethics consultation practices have been reported. The objective of this study was to explore how American and Japanese experts analyze an Alzheimer's case regarding ethics consultation. Methods We presented the case to physicians and ethicists from the US and Japan (one expert from each field from both countries; total = 4) and obtained their responses through a questionnaire and in-depth interviews. Results Establishing a consensus was a common goal among American and Japanese participants. In attempting to achieve consensus, the most significant similarity between Japanese and American ethics consultants was that they both appeared to adopt an "ethics facilitation" approach. Differences were found in recommendation and assessment between the American and Japanese participants. In selecting a surrogate, the American participants chose to contact the grandson before designating the daughter-in-law as the surrogate decision-maker. Conversely the Japanese experts assumed that the daughter-in-law was the surrogate. Conclusion Our findings suggest that consensus building through an "ethics facilitation" approach may be a commonality to the practice of ethics consultation in the US and Japan, while differences emerged in terms of recommendations, surrogate assessment, and assessing treatments. Further research is needed to appreciate differences not only among different nations including, but not limited to, countries in Europe, Asia and the Americas, but also within each country. PMID:18226273

The Anglo-Japanese Alliance and Japanese Expansionism 1902-1923.

DTIC Science & Technology

1992-06-05

Alienation 1919-1952. London: Cambridge University Press. 1982. • The Oriains of the Russo-Japanese War. London: Longman Group Limited. 1985. Nitobe ... Inazo . Bushido - The Soul of Japan. Tokyo: Tuttle. 1981. Okamoto, Shumpei. The Japan Oliaarchv and the Russo-Japanese War. New York: Columbia

Design and optimization of the micro-engine turbine rotor manufacturing using the rapid prototyping technology

NASA Astrophysics Data System (ADS)

Vdovin, R. A.; Smelov, V. G.

2017-02-01

This work describes the experience in manufacturing the turbine rotor for the micro-engine. It demonstrates the design principles for the complex investment casting process combining the use of the ProCast software and the rapid prototyping techniques. At the virtual modelling stage, in addition to optimized process parameters, the casting structure was improved to obtain the defect-free section. The real production stage allowed demonstrating the performance and fitness of rapid prototyping techniques for the manufacture of geometrically-complex engine-building parts.

Medication Reconciliation: Work Domain Ontology, prototype development, and a predictive model.

PubMed

Markowitz, Eliz; Bernstam, Elmer V; Herskovic, Jorge; Zhang, Jiajie; Shneiderman, Ben; Plaisant, Catherine; Johnson, Todd R

2011-01-01

Medication errors can result from administration inaccuracies at any point of care and are a major cause for concern. To develop a successful Medication Reconciliation (MR) tool, we believe it necessary to build a Work Domain Ontology (WDO) for the MR process. A WDO defines the explicit, abstract, implementation-independent description of the task by separating the task from work context, application technology, and cognitive architecture. We developed a prototype based upon the WDO and designed to adhere to standard principles of interface design. The prototype was compared to Legacy Health System's and Pre-Admission Medication List Builder MR tools via a Keystroke-Level Model analysis for three MR tasks. The analysis found the prototype requires the fewest mental operations, completes tasks in the fewest steps, and completes tasks in the least amount of time. Accordingly, we believe that developing a MR tool, based upon the WDO and user interface guidelines, improves user efficiency and reduces cognitive load.

Medication Reconciliation: Work Domain Ontology, Prototype Development, and a Predictive Model

PubMed Central

Markowitz, Eliz; Bernstam, Elmer V.; Herskovic, Jorge; Zhang, Jiajie; Shneiderman, Ben; Plaisant, Catherine; Johnson, Todd R.

2011-01-01

Medication errors can result from administration inaccuracies at any point of care and are a major cause for concern. To develop a successful Medication Reconciliation (MR) tool, we believe it necessary to build a Work Domain Ontology (WDO) for the MR process. A WDO defines the explicit, abstract, implementation-independent description of the task by separating the task from work context, application technology, and cognitive architecture. We developed a prototype based upon the WDO and designed to adhere to standard principles of interface design. The prototype was compared to Legacy Health System’s and Pre-Admission Medication List Builder MR tools via a Keystroke-Level Model analysis for three MR tasks. The analysis found the prototype requires the fewest mental operations, completes tasks in the fewest steps, and completes tasks in the least amount of time. Accordingly, we believe that developing a MR tool, based upon the WDO and user interface guidelines, improves user efficiency and reduces cognitive load. PMID:22195146

The intonation of gapping and coordination in Japanese: evidence for intonational phrase and utterance.

PubMed

Kawahara, Shigeto; Shinya, Takahito

2008-01-01

In previous studies of Japanese intonational phonology, levels of prosodic constituents above the Major Phrase have not received much attention. This paper argues that at least two prosodic levels exist above the Major Phrase in Japanese. Through a detailed investigation of the intonation of gapping and coordination in Japanese, we argue that each syntactic clause projects its own Intonational Phrase, while an entire sentence constitutes one Utterance. We show that the Intonational Phrase is characterized by tonal lowering, creakiness and a pause in final position, as well as a distinctive large initial rise and pitch reset at its beginning. The Utterance defines a domain of declination, and it is signaled by an even larger initial rise, as well as a phrasal H tone at its right edge. Building on our empirical findings, we discuss several implications for the theory of intonational phonology. (c) 2007 S. Karger AG, Basel.

A Conceptual Model of Cultural Predictors of Anxiety among Japanese American and Part-Japanese American Adolescents.

ERIC Educational Resources Information Center

Williams, John Kino Yamaguchi; Goebert, Deborah; Hishinuma, Earl; Miyamoto, Robin; Anzai, Neal; Izutsu, Satoru; Yanagida, Evelyn; Nishimura, Stephanie; Andrade, Naleen; Baker, F. M.

2002-01-01

Develops and assesses a model integrating Japanese ethnicity, cultural identity, and anxiety in Japanese American and part-Japanese American high school seniors. Japanese American adolescents scored higher on the scale and reported fewer anxiety symptoms than part-Japanese American adolescents. The model had a good overall fit, suggesting that…

Analysis for Building Envelopes and Mechanical Systems Using 2012 CBECS Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Winiarski, David W.; Halverson, Mark A.; Butzbaugh, Joshua B.

This report describes the aggregation and mapping of certain building characteristics data available in the most recent Commercial Building Energy Consumption Survey (CBECS) (DOE EIA 2012) to describe most typical building construction practices. This report provides summary data for potential use in the support of modifications to the Pacific Northwest National Laboratory’s commercial building prototypes used for building energy code analysis. Specifically, this report outlines findings and most typical design choices for certain building envelope and heating, ventilating, and air-conditioning (HVAC) system choices.

Simulation of energy- efficient building prototype using different insulating materials

NASA Astrophysics Data System (ADS)

Ouhaibi, Salma; Belouaggadia, Naoual; Lbibb, Rachid; Ezzine, Mohammed

2018-05-01

The objective of this work is to analyze the energetic efficiency of an individual building including an area of 130 m2 multi-zone, located in the region of FEZ which is characterized by a very hot and dry climate in summer and a quite cold one in winter, by incorporating insulating materials. This study was performed using TRNSYS V16 simulation software during a typical year of the FEZ region. Our simulation consists in developing a comparative study of two types of polystyrene and silica-aerogel insulation materials, in order to determine the best thermal performance. The results show that the thermal insulation of the building envelope is among the most effective solutions that give a significant reduction in energy requirements. Similarly, the use of silica-aerogels gives a good thermal performance, and therefore a good energy gain.

The Gamma-ray Cherenkov Telescope, an end-to end Schwarzschild-Couder telescope prototype proposed for the Cherenkov Telescope Array

NASA Astrophysics Data System (ADS)

Dournaux, J. L.; Abchiche, A.; Allan, D.; Amans, J. P.; Armstrong, T. P.; Balzer, A.; Berge, D.; Boisson, C.; Bousquet, J.-J.; Brown, A. M.; Bryan, M.; Buchholtz, G.; Chadwick, P. M.; Costantini, H.; Cotter, G.; Dangeon, L.; Daniel, M. K.; De Franco, A.; De Frondat, F.; Dumas, D.; Ernenwein, J. P.; Fasola, G.; Funk, S.; Gironnet, J.; Graham, J. A.; Greenshaw, T.; Hameau, B.; Hervet, O.; Hidaka, N.; Hinton, J. A.; Huet, J. M.; Jégouzo, I.; Jogler, T.; Kawashima, T.; Kraush, M.; Lapington, J. S.; Laporte, P.; Lefaucheur, J.; Markoff, S.; Melse, T.; Mohrmann, L.; Molyneux, P.; Nolan, S. J.; Okumura, A.; Osborne, J. P.; Parsons, R. D.; Rosen, S.; Ross, D.; Rowell, G.; Rulten, C. B.; Sato, Y.; Sayède, F.; Schmoll, J.; Schoorlemmer, H.; Servillat, M.; Sol, H.; Stamatescu, V.; Stephan, M.; Stuik, R.; Sykes, J.; Tajima, H.; Thornhill, J.; Tibaldo, L.; Trichard, C.; Vink, J.; Watson, J. J.; White, R.; Yamane, N.; Zech, A.; Zink, A.

2016-08-01

The GCT (Gamma-ray Cherenkov Telescope) is a dual-mirror prototype of Small-Sized-Telescopes proposed for the Cherenkov Telescope Array (CTA) and made by an Australian-Dutch-French-German-Indian-Japanese-UK-US consortium. The integration of this end-to-end telescope was achieved in 2015. On-site tests and measurements of the first Cherenkov images on the night sky began on November 2015. This contribution describes the telescope and plans for the pre-production and a large scale production within CTA.

Statistical Machine Translation of Japanese

DTIC Science & Technology

2007-03-01

hiragana and katakana) syllabaries…………………….. 20 3.2 Sample Japanese sentence showing kanji and kana……………………... 21 3.5 Japanese formality example...syllabary. 19 Figure 3.1. Japanese kana syllabaries, hiragana for native Japanese words, word endings, and particles, and katakana for foreign...Figure 3.2. Simple Japanese sentence showing the use of kanji, hiragana , and katakana. Kanji is used for nouns and verb, adjective, and

Investigating the role of implicit prototypes in the prototype willingness model.

PubMed

Howell, Jennifer L; Ratliff, Kate A

2017-06-01

One useful theory to predict health behavior is the prototype-willingness model (PWM), which posits that people are more willing to engage in behavior to the extent that they have a positive view of the prototypical person who performs that behavior. The goal of the present research is to test whether adding an implicit measure of prototype favorability might improve explanatory power in the PWM. Two studies examined whether implicit prototype favorability uniquely predicted White women's intentions to engage in healthy sun behavior over the next 3-6 months, and their willingness to engage in risky sun behavior, should the opportunity arise. The results suggested that implicit prototype favorability, particularly implicit prototypes of those who engage in risky UV-related behaviors, uniquely predicted intentions to engage in healthy sun behavior and willingness to engage in risky sun behavior in the PWM.

Software Prototyping

PubMed Central

Del Fiol, Guilherme; Hanseler, Haley; Crouch, Barbara Insley; Cummins, Mollie R.

2016-01-01

Summary Background Health information exchange (HIE) between Poison Control Centers (PCCs) and Emergency Departments (EDs) could improve care of poisoned patients. However, PCC information systems are not designed to facilitate HIE with EDs; therefore, we are developing specialized software to support HIE within the normal workflow of the PCC using user-centered design and rapid prototyping. Objective To describe the design of an HIE dashboard and the refinement of user requirements through rapid prototyping. Methods Using previously elicited user requirements, we designed low-fidelity sketches of designs on paper with iterative refinement. Next, we designed an interactive high-fidelity prototype and conducted scenario-based usability tests with end users. Users were asked to think aloud while accomplishing tasks related to a case vignette. After testing, the users provided feedback and evaluated the prototype using the System Usability Scale (SUS). Results Survey results from three users provided useful feedback that was then incorporated into the design. After achieving a stable design, we used the prototype itself as the specification for development of the actual software. Benefits of prototyping included having 1) subject-matter experts heavily involved with the design; 2) flexibility to make rapid changes, 3) the ability to minimize software development efforts early in the design stage; 4) rapid finalization of requirements; 5) early visualization of designs; 6) and a powerful vehicle for communication of the design to the programmers. Challenges included 1) time and effort to develop the prototypes and case scenarios; 2) no simulation of system performance; 3) not having all proposed functionality available in the final product; and 4) missing needed data elements in the PCC information system. PMID:27081404

Acculturation of Personality: A Three-Culture Study of Japanese, Japanese Americans, and European Americans.

PubMed

Güngör, Derya; Bornstein, Marc H; De Leersnyder, Jozefien; Cote, Linda; Ceulemans, Eva; Mesquita, Batja

2013-07-01

The present study tests the hypothesis that involvement with a new culture instigates changes in personality of immigrants that result in (a) better fit with the norms of the culture of destination and (b) reduced fit with the norms of the culture of origin. Participants were 40 Japanese first-generation immigrants to the United States, 57 Japanese monoculturals, and 60 U.S. monoculturals. All participants completed the Jackson Personality Inventory (JPI) as a measure of the Big Five; immigrants completed the Japanese American Acculturation Scale. Immigrants' fits with the cultures of destination and origin were calculated by correlating Japanese American mothers' patterns of ratings on the Big Five with the average patterns of ratings of European Americans and Japanese on the same personality dimensions. Japanese Americans became more "American" and less "Japanese" in their personality as they reported higher participation in the U.S. culture. The results support the view that personality can be subject to cultural influence.

Arkose: A Prototype Mechanism and Tool for Collaborative Information Generation and Distillation

ERIC Educational Resources Information Center

Nam, Kevin Kyung

2010-01-01

The goals of this thesis have been to gain a better understanding of collaborative knowledge sharing and distilling and to build a prototype collaborative system that supports flexible knowledge generation and distillation. To reach these goals, I have conducted two user studies and built two systems. The first system, Arkose 1.0, is a…

A Comparison of US and Japanese Dental Restorative Care Present on Service Members Recovered from the WWII Era.

PubMed

Shiroma, Calvin Y

2017-11-01

The documentation of dental materials used in the USA during the WWII era is readily available, while references for the Japanese are minimal. It was therefore important to build a photographic database of Japanese restorative care which could be utilized as a comparison tool for the deployed odontologist. The dental restorative care of approximately 400 US and 100 Japanese sets of remains was evaluated. Both countries share many similar restorative techniques to include collared crowns, full-coverage restorations, cantilever bridge/pontics to close spaces; restorative materials such as amalgam, gold, and zinc phosphate (temporary) restorations; and removable prostheses. The dental restorative materials most commonly used by US dentists include the amalgam and silicate cement, while the full-coverage crown was the type of restoration most frequently seen on the Japanese remains. Silicates, porcelain and replaceable crowns, and partial-coverage prepared crowns were not observed on the recovered Japanese remains. Published 2017. This article is a U.S. Government work and is in the public domain in the USA.

Japanese Guideline for Atopic Dermatitis 2014.

PubMed

Katayama, Ichiro; Kohno, Yoichi; Akiyama, Kazuo; Aihara, Michiko; Kondo, Naomi; Saeki, Hidehisa; Shoji, Shunsuke; Yamada, Hidekazu; Nakamura, Koichiro

2014-01-01

Given the importance of appropriate diagnosis and appropriate assessment of cutaneous symptoms in treatment of atopic dermatitis, the basics of treatment in this guideline are composed of (1) investigation and coun- termeasures of causes and exacerbating factors, (2) correction of skin dysfunctions (skin care), and (3) pharmacotherapy, as three mainstays. These are based on the disease concept that atopic dermatitis is a inflammatory cutaneous disease with eczema by atopic diathesis, multi-factorial in onset and aggravation, and accompanied by skin dysfunctions. These three points are equally important and should be appropriately combined in accordance with the symptoms of each patient. In treatment, it is important to transmit the etiological, pathological, physiological, or therapeutic information to the patient to build a favorable partnership with the patient or his/her family so that they may fully understand the treatment. This guideline discusses chiefly the basic therapy in relation to the treatment of this disease. The goal of treatment is to enable patients to lead an uninterrupted social life and to control their cutaneous symptoms so that their quality of life (QOL) may meet a satisfactory level. The basics of treatment discussed in this guideline are based on the "Guidelines for the Treatment of Atopic Dermatitis 2008" prepared by the Health and Labour Sciences Research and the "Guidelines for the Management of Atopic Dermatitis 2012 (ADGL2012)" prepared by the Atopic Dermatitis Guidelines Advisory Committee, Japanese Society of Allergology in principle. The guidelines for the treatment of atopic dermatitis are summarized in the "Japanese Guideline for the Diagnosis and Treatment of Allergic Disease 2013" together with those for other allergic diseases. © 2014 Japanese Society of Allergology.

Ares I-X Ground Diagnostic Prototype

NASA Technical Reports Server (NTRS)

Schwabacher, Mark; Martin, Rodney; Waterman, Robert; Oostdyk, Rebecca; Ossenfort, John; Matthews, Bryan

2010-01-01

Automating prelaunch diagnostics for launch vehicles offers three potential benefits. First, it potentially improves safety by detecting faults that might otherwise have been missed so that they can be corrected before launch. Second, it potentially reduces launch delays by more quickly diagnosing the cause of anomalies that occur during prelaunch processing. Reducing launch delays will be critical to the success of NASA's planned future missions that require in-orbit rendezvous. Third, it potentially reduces costs by reducing both launch delays and the number of people needed to monitor the prelaunch process. NASA is currently developing the Ares I launch vehicle to bring the Orion capsule and its crew of four astronauts to low-earth orbit on their way to the moon. Ares I-X will be the first unmanned test flight of Ares I. It is scheduled to launch on October 27, 2009. The Ares I-X Ground Diagnostic Prototype is a prototype ground diagnostic system that will provide anomaly detection, fault detection, fault isolation, and diagnostics for the Ares I-X first-stage thrust vector control (TVC) and for the associated ground hydraulics while it is in the Vehicle Assembly Building (VAB) at John F. Kennedy Space Center (KSC) and on the launch pad. It will serve as a prototype for a future operational ground diagnostic system for Ares I. The prototype combines three existing diagnostic tools. The first tool, TEAMS (Testability Engineering and Maintenance System), is a model-based tool that is commercially produced by Qualtech Systems, Inc. It uses a qualitative model of failure propagation to perform fault isolation and diagnostics. We adapted an existing TEAMS model of the TVC to use for diagnostics and developed a TEAMS model of the ground hydraulics. The second tool, Spacecraft Health Inference Engine (SHINE), is a rule-based expert system developed at the NASA Jet Propulsion Laboratory. We developed SHINE rules for fault detection and mode identification. The prototype

Building Efficiency Technologies by Tomorrow’s Engineers and Researchers (BETTER) Capstone. Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yee, Shannon

BETTER Capstone supported 29 student project teams consisting of 155 students over two years in developing transformative building energy efficiency technologies through a capstone design experience. Capstone is the culmination of an undergraduate student’s engineering education. Interdisciplinary teams of students spent a semester designing and prototyping a technological solution for a variety building energy efficiency problems. During this experience students utilized the full design process, including the manufacturing and testing of a prototype solution, as well as publically demonstrating the solution at the Capstone Design Expo. As part of this project, students explored modern manufacturing techniques and gained hands-on experiencemore » with these techniques to produce their prototype technologies. This research added to the understanding of the challenges within building technology education and engagement with industry. One goal of the project was to help break the chicken-and-egg problem with getting students to engage more deeply with the building technology industry. It was learned however that this industry is less interested in trying innovative new concept but rather interested in hiring graduates for existing conventional building efforts. While none of the projects yielded commercial success, much individual student growth and learning was accomplished, which is a long-term benefit to the public at large.« less

Americans and Japanese Nonverbal Communication. Linguistic Communications 15 (Papers in Japanese Linguistics 3).

ERIC Educational Resources Information Center

Taylor, Harvey M.

Each culture has its own nonverbal as well as its verbal language. Movements, gestures and sounds have distinct and often conflicting interpretations in different countries. For Americans communicating with Japanese, misunderstandings are of two types: Japanese behavior which is completely new to the American, and Japanese behavior which is…

Detraditionalisation: Japanese Students in the USA.

ERIC Educational Resources Information Center

Ueno, Junko

2001-01-01

Focuses on the identity formation of Japanese students temporarily living in the United States. The students were enrolled in Japanese Saturday school and in American public schools. Student interviews reveal a mixture of Japanese and American characteristics. Suggests Japanese students do not reject either culture--Japanese or American--but that…

Japanese-English language equivalence of the Cognitive Abilities Screening Instrument among Japanese-Americans.

PubMed

Gibbons, Laura E; McCurry, Susan; Rhoads, Kristoffer; Masaki, Kamal; White, Lon; Borenstein, Amy R; Larson, Eric B; Crane, Paul K

2009-02-01

The Cognitive Abilities Screening Instrument (CASI) was designed for use in cross-cultural studies of Japanese and Japanese-American elderly in Japan and the U.S.A. The measurement equivalence in Japanese and English had not been confirmed in prior studies. We analyzed the 40 CASI items for differential item functioning (DIF) related to test language, as well as self-reported proficiency with written Japanese, age, and educational attainment in two large epidemiologic studies of Japanese-American elderly: the Kame Project (n=1708) and the Honolulu-Asia Aging Study (HAAS; n = 3148). DIF was present if the demographic groups differed in the probability of success on an item, after controlling for their underlying cognitive functioning ability. While seven CASI items had DIF related to language of testing in Kame (registration of one item; recall of one item; similes; judgment; repeating a phrase; reading and performing a command; and following a three-step instruction), the impact of DIF on participants' scores was minimal. Mean scores for Japanese and English speakers in Kame changed by <0.1 SD after accounting for DIF related to test language. In HAAS, insufficient numbers of participants were tested in Japanese to assess DIF related to test language. In both studies, DIF related to written Japanese proficiency, age, and educational attainment had minimal impact. To the extent that DIF could be assessed, the CASI appeared to meet the goal of measuring cognitive function equivalently in Japanese and English. Stratified data collection would be needed to confirm this conclusion. DIF assessment should be used in other studies with multiple language groups to confirm that measures function equivalently or, if not, form scores that account for DIF.

A Rising Sun Shines on American Training. Schools Help Prepare the American Workers Japanese Manufacturers Need.

ERIC Educational Resources Information Center

Benanzer, Elizabeth; And Others

1991-01-01

Describes how local vocational schools and community colleges can play a key role in building a strong partnership between Japanese manufacturers and their U.S. workers. Kellogg Community College's (Michigan) partnership with Nippondenso and the Ohio Industrial Training Program's work with Honda of America are profiled. (JOW)

Data management for biofied building

NASA Astrophysics Data System (ADS)

Matsuura, Kohta; Mita, Akira

2015-03-01

Recently, Smart houses have been studied by many researchers to satisfy individual demands of residents. However, they are not feasible yet as they are very costly and require many sensors to be embedded into houses. Therefore, we suggest "Biofied Building". In Biofied Building, sensor agent robots conduct sensing, actuation, and control in their house. The robots monitor many parameters of human lives such as walking postures and emotion continuously. In this paper, a prototype network system and a data model for practical application for Biofied Building is pro-posed. In the system, functions of robots and servers are divided according to service flows in Biofield Buildings. The data model is designed to accumulate both the building data and the residents' data. Data sent from the robots and data analyzed in the servers are automatically registered into the database. Lastly, feasibility of this system is verified through lighting control simulation performed in an office space.

39. VIEW LOOKING NORTH INTO THE REAR OF THE BUILDING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

39. VIEW LOOKING NORTH INTO THE REAR OF THE BUILDING COMPLEX AND SERVICE COURT. (NOTE: HISTORIC JAPANESE FALSE CYPRESS AND HINOKI FALSE CYPRESS IN CENTER; FRAMING FOR BLUEPRINT PRODUCTION EVIDENT ON SECOND STORY OF OFFICE WING TO LEFT). - Fairsted, 99 Warren Street, Brookline, Norfolk County, MA

Japanese Encephalitis: Frequently Asked Questions

MedlinePlus

... the vaccine, what should I do? What is Japanese encephalitis? Japanese encephalitis (JE) is a potentially severe ... cause inflammation of the brain (encephalitis). Where does Japanese encephalitis occur? JE occurs in Asia and parts ...

Energy performance of building fabric - Comparing two types of vernacular residential houses

NASA Astrophysics Data System (ADS)

Draganova, Vanya Y.; Matsumoto, Hiroshi; Tsuzuki, Kazuyo

2017-10-01

Notwithstanding apparent differences, Japanese and Bulgarian traditional residential houses share a lot of common features - building materials, building techniques, even layout design. Despite the similarities, these two types of houses have not been compared so far. The study initiates such comparison. The focus is on houses in areas with similar climate in both countries. Current legislation requirements are compared, as well as the criteria for thermal comfort of people. Achieving high energy performance results from a dynamic system of 4 main key factors - thermal comfort range, heating/cooling source, building envelope and climatic conditions. A change in any single one of them can affect the final energy performance. However, it can be expected that a combination of changes in more than one factor usually occurs. The aim of this study is to evaluate the correlation between the thermal performance of building envelope designed under current regulations and a traditional one, having in mind the different thermal comfort range in the two countries. A sample building model is calculated in Scenario 1 - Japanese traditional building fabric, Scenario 2 - Bulgarian traditional building fabric and Scenario 3 - meeting the requirements of the more demanding current regulations. The energy modelling is conducted using EnergyPlus through OpenStudio cross-platform of software tools. The 3D geometry for the simulation is created using OpenStudio SketchUp Plug-in. Equal number of inhabitants, electricity consumption and natural ventilation is assumed. The results show that overall low energy consumption can be achieved using traditional building fabric as well, when paired with a wider thermal comfort range. Under these conditions traditional building design is still viable today. This knowledge can reestablish the use of traditional building fabric in contemporary design, stimulate preservation of local culture, building traditions and community identity.

Acculturation of Personality: A Three-Culture Study of Japanese, Japanese Americans, and European Americans

PubMed Central

Güngör, Derya; Bornstein, Marc H.; De Leersnyder, Jozefien; Cote, Linda; Ceulemans, Eva; Mesquita, Batja

2013-01-01

The present study tests the hypothesis that involvement with a new culture instigates changes in personality of immigrants that result in (a) better fit with the norms of the culture of destination and (b) reduced fit with the norms of the culture of origin. Participants were 40 Japanese first-generation immigrants to the United States, 57 Japanese monoculturals, and 60 U.S. monoculturals. All participants completed the Jackson Personality Inventory (JPI) as a measure of the Big Five; immigrants completed the Japanese American Acculturation Scale. Immigrants’ fits with the cultures of destination and origin were calculated by correlating Japanese American mothers’ patterns of ratings on the Big Five with the average patterns of ratings of European Americans and Japanese on the same personality dimensions. Japanese Americans became more “American” and less “Japanese” in their personality as they reported higher participation in the U.S. culture. The results support the view that personality can be subject to cultural influence. PMID:23935211

Automatic building information model query generation

DOE PAGES

Jiang, Yufei; Yu, Nan; Ming, Jiang; ...

2015-12-01

Energy efficient building design and construction calls for extensive collaboration between different subfields of the Architecture, Engineering and Construction (AEC) community. Performing building design and construction engineering raises challenges on data integration and software interoperability. Using Building Information Modeling (BIM) data hub to host and integrate building models is a promising solution to address those challenges, which can ease building design information management. However, the partial model query mechanism of current BIM data hub collaboration model has several limitations, which prevents designers and engineers to take advantage of BIM. To address this problem, we propose a general and effective approachmore » to generate query code based on a Model View Definition (MVD). This approach is demonstrated through a software prototype called QueryGenerator. In conclusion, by demonstrating a case study using multi-zone air flow analysis, we show how our approach and tool can help domain experts to use BIM to drive building design with less labour and lower overhead cost.« less

Automatic building information model query generation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Yufei; Yu, Nan; Ming, Jiang

Energy efficient building design and construction calls for extensive collaboration between different subfields of the Architecture, Engineering and Construction (AEC) community. Performing building design and construction engineering raises challenges on data integration and software interoperability. Using Building Information Modeling (BIM) data hub to host and integrate building models is a promising solution to address those challenges, which can ease building design information management. However, the partial model query mechanism of current BIM data hub collaboration model has several limitations, which prevents designers and engineers to take advantage of BIM. To address this problem, we propose a general and effective approachmore » to generate query code based on a Model View Definition (MVD). This approach is demonstrated through a software prototype called QueryGenerator. In conclusion, by demonstrating a case study using multi-zone air flow analysis, we show how our approach and tool can help domain experts to use BIM to drive building design with less labour and lower overhead cost.« less

Modelica buildings library

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wetter, Michael; Zuo, Wangda; Nouidui, Thierry S.

This paper describes the Buildings library, a free open-source library that is implemented in Modelica, an equation-based object-oriented modeling language. The library supports rapid prototyping, as well as design and operation of building energy and control systems. First, we describe the scope of the library, which covers HVAC systems, multi-zone heat transfer and multi-zone airflow and contaminant transport. Next, we describe differentiability requirements and address how we implemented them. We describe the class hierarchy that allows implementing component models by extending partial implementations of base models of heat and mass exchangers, and by instantiating basic models for conservation equations andmore » flow resistances. We also describe associated tools for pre- and post-processing, regression tests, co-simulation and real-time data exchange with building automation systems. Furthermore, the paper closes with an example of a chilled water plant, with and without water-side economizer, in which we analyzed the system-level efficiency for different control setpoints.« less

Modelica buildings library

DOE PAGES

Wetter, Michael; Zuo, Wangda; Nouidui, Thierry S.; ...

2013-03-13

This paper describes the Buildings library, a free open-source library that is implemented in Modelica, an equation-based object-oriented modeling language. The library supports rapid prototyping, as well as design and operation of building energy and control systems. First, we describe the scope of the library, which covers HVAC systems, multi-zone heat transfer and multi-zone airflow and contaminant transport. Next, we describe differentiability requirements and address how we implemented them. We describe the class hierarchy that allows implementing component models by extending partial implementations of base models of heat and mass exchangers, and by instantiating basic models for conservation equations andmore » flow resistances. We also describe associated tools for pre- and post-processing, regression tests, co-simulation and real-time data exchange with building automation systems. Furthermore, the paper closes with an example of a chilled water plant, with and without water-side economizer, in which we analyzed the system-level efficiency for different control setpoints.« less

Simulation in a dynamic prototyping environment: Petri nets or rules?

NASA Technical Reports Server (NTRS)

Moore, Loretta A.; Price, Shannon W.; Hale, Joseph P.

1994-01-01

An evaluation of a prototyped user interface is best supported by a simulation of the system. A simulation allows for dynamic evaluation of the interface rather than just a static evaluation of the screen's appearance. This allows potential users to evaluate both the look (in terms of the screen layout, color, objects, etc.) and feel (in terms of operations and actions which need to be performed) of a system's interface. Because of the need to provide dynamic evaluation of an interface, there must be support for producing active simulations. The high-fidelity training simulators are normally delivered too late to be effectively used in prototyping the displays. Therefore, it is important to build a low fidelity simulator, so that the iterative cycle of refining the human computer interface based upon a user's interactions can proceed early in software development.

Simulation in a dynamic prototyping environment: Petri nets or rules?

NASA Technical Reports Server (NTRS)

Moore, Loretta A.; Price, Shannon; Hale, Joseph P.

1994-01-01

An evaluation of a prototyped user interface is best supported by a simulation of the system. A simulation allows for dynamic evaluation of the interface rather than just a static evaluation of the screen's appearance. This allows potential users to evaluate both the look (in terms of the screen layout, color, objects, etc.) and feel (in terms of operations and actions which need to be performed) of a system's interface. Because of the need to provide dynamic evaluation of an interface, there must be support for producing active simulations. The high-fidelity training simulators are delivered too late to be effectively used in prototyping the displays. Therefore, it is important to build a low fidelity simulator, so that the iterative cycle of refining the human computer interface based upon a user's interactions can proceed early in software development.

Homogamy and Intermarriage of Japanese and Japanese Americans With Whites Surrounding World War II.

PubMed

Ono, Hiromi; Berg, Justin

2010-10-01

Although some sociologists have suggested that Japanese Americans quickly assimilated into mainstream America, scholars of Japanese America have highlighted the heightened exclusion that the group experienced. This study tracked historical shifts in the exclusion level of Japanese and Japanese Americans in the United States surrounding World War II with homogamy and intermarriage with Whites for the prewar (1930-1940) and resettlement (1946-1966) marriage cohorts. The authors applied log-linear models to census microsamples (N = 1,590,416) to estimate the odds ratios of homogamy versus intermarriage. The unadjusted odds ratios of Japanese Americans declined between cohorts and appeared to be consistent with the assimilation hypothesis. Once compositional influences and educational pairing patterns were adjusted, however, the odds ratios increased and supported the heightened exclusion hypothesis.

Japanese guidelines for atopic dermatitis 2017.

PubMed

Katayama, Ichiro; Aihara, Michiko; Ohya, Yukihiro; Saeki, Hidehisa; Shimojo, Naoki; Shoji, Shunsuke; Taniguchi, Masami; Yamada, Hidekazu

2017-04-01

Given the importance of appropriate diagnosis and appropriate assessment of cutaneous symptoms in treatment of atopic dermatitis, the basics of treatment in this guideline are composed of (1) investigation and countermeasures of causes and exacerbating factors, (2) correction of skin dysfunctions (skin care), and (3) pharmacotherapy, as three mainstays. These are based on the disease concept that atopic dermatitis is an inflammatory cutaneous disease with eczema by atopic diathesis, multi-factorial in onset and aggravation, and accompanied by skin dysfunctions. These three points are equally important and should be appropriately combined in accordance with the symptoms of each patient. In treatment, it is important to transmit the etiological, pathological, physiological, or therapeutic information to the patient to build a favorable partnership with the patient or his/her family so that they may fully understand the treatment. This guideline discusses chiefly the basic therapy in relation to the treatment of this disease. The goal of treatment is to enable patients to lead an uninterrupted social life and to control their cutaneous symptoms so that their quality of life (QOL) may meet a satisfactory level. The basics of treatment discussed in this guideline are based on the "Guidelines for the Treatment of Atopic Dermatitis 2008" prepared by the Health and Labour Sciences Research and the "Guidelines for the Management of Atopic Dermatitis 2015 (ADGL2015)" prepared by the Atopic Dermatitis Guidelines Advisory Committee, Japanese Society of Allergology in principle. The guidelines for the treatment of atopic dermatitis are summarized in the "Japanese Guideline for the Diagnosis and Treatment of Allergic Disease 2016" together with those for other allergic diseases. Copyright © 2017 Japanese Society of Allergology. Production and hosting by Elsevier B.V. All rights reserved.

Trust in One’s Physician: The Role of Ethnic Match, Autonomy, Acculturation, and Religiosity Among Japanese and Japanese Americans

PubMed Central

Tarn, Derjung M.; Meredith, Lisa S.; Kagawa-Singer, Marjorie; Matsumura, Shinji; Bito, Seiji; Oye, Robert K.; Liu, Honghu; Kahn, Katherine L.; Fukuhara, Shunichi; Wenger, Neil S.

2005-01-01

PURPOSE Trust is a cornerstone of the physician-patient relationship. We investigated the relation of patient characteristics, religiosity, acculturation, physician ethnicity, and insurance-mandated physician change to levels of trust in Japanese American and Japanese patients. METHODS A self-administered, cross-sectional questionnaire in English and Japanese (completed in the language of their choice) was given to community-based samples of 539 English-speaking Japanese Americans, 340 Japanese-speaking Japanese Americans, and 304 Japanese living in Japan. RESULTS Eighty-seven percent of English-speaking Japanese Americans, 93% of Japanese-speaking Japanese Americans, and 58% of Japanese living in Japan responded to trust items and reported mean trust scores of 83, 80, and 68, respectively, on a scale ranging from 0 to 100. In multivariate analyses, English-speaking and Japanese-speaking Japanese American respondents reported more trust than Japanese respondents living in Japan (P values <.001). Greater religiosity (P <.001), less desire for autonomy (P <.001), and physician-patient relationships of longer duration (P <.001) were related to increased trust. Among Japanese Americans, more acculturated respondents reported more trust (P <.001), and Japanese physicians were trusted more than physicians of another ethnicity. Among respondents prompted to change physicians because of insurance coverage, the 48% who did not want to switch reported less trust in their current physician than in their former physician (mean score of 82 vs 89, P <.001). CONCLUSIONS Religiosity, autonomy preference, and acculturation were strongly related to trust in one’s physician among the Japanese American and Japanese samples studied and may provide avenues to enhance the physician-patient relationship. The strong relationship of trust with patient-physician ethnic match and the loss of trust when patients, in retrospect, report leaving a preferred physician suggest unintended

Now you hear it, now you don't: vowel devoicing in Japanese infant-directed speech.

PubMed

Fais, Laurel; Kajikawa, Sachiyo; Amano, Shigeaki; Werker, Janet F

2010-03-01

In this work, we examine a context in which a conflict arises between two roles that infant-directed speech (IDS) plays: making language structure salient and modeling the adult form of a language. Vowel devoicing in fluent adult Japanese creates violations of the canonical Japanese consonant-vowel word structure pattern by systematically devoicing particular vowels, yielding surface consonant clusters. We measured vowel devoicing rates in a corpus of infant- and adult-directed Japanese speech, for both read and spontaneous speech, and found that the mothers in our study preserve the fluent adult form of the language and mask underlying phonological structure by devoicing vowels in infant-directed speech at virtually the same rates as those for adult-directed speech. The results highlight the complex interrelationships among the modifications to adult speech that comprise infant-directed speech, and that form the input from which infants begin to build the eventual mature form of their native language.

The modern Japanese color lexicon.

PubMed

Kuriki, Ichiro; Lange, Ryan; Muto, Yumiko; Brown, Angela M; Fukuda, Kazuho; Tokunaga, Rumi; Lindsey, Delwin T; Uchikawa, Keiji; Shioiri, Satoshi

2017-03-01

Despite numerous prior studies, important questions about the Japanese color lexicon persist, particularly about the number of Japanese basic color terms and their deployment across color space. Here, 57 native Japanese speakers provided monolexemic terms for 320 chromatic and 10 achromatic Munsell color samples. Through k-means cluster analysis we revealed 16 statistically distinct Japanese chromatic categories. These included eight chromatic basic color terms (aka/red, ki/yellow, midori/green, ao/blue, pink, orange, cha/brown, and murasaki/purple) plus eight additional terms: mizu ("water")/light blue, hada ("skin tone")/peach, kon ("indigo")/dark blue, matcha ("green tea")/yellow-green, enji/maroon, oudo ("sand or mud")/mustard, yamabuki ("globeflower")/gold, and cream. Of these additional terms, mizu was used by 98% of informants, and emerged as a strong candidate for a 12th Japanese basic color term. Japanese and American English color-naming systems were broadly similar, except for color categories in one language (mizu, kon, teal, lavender, magenta, lime) that had no equivalent in the other. Our analysis revealed two statistically distinct Japanese motifs (or color-naming systems), which differed mainly in the extension of mizu across our color palette. Comparison of the present data with an earlier study by Uchikawa & Boynton (1987) suggests that some changes in the Japanese color lexicon have occurred over the last 30 years.

Homogamy and Intermarriage of Japanese and Japanese Americans With Whites Surrounding World War II

PubMed Central

Ono, Hiromi; Berg, Justin

2010-01-01

Although some sociologists have suggested that Japanese Americans quickly assimilated into mainstream America, scholars of Japanese America have highlighted the heightened exclusion that the group experienced. This study tracked historical shifts in the exclusion level of Japanese and Japanese Americans in the United States surrounding World War II with homogamy and intermarriage with Whites for the prewar (1930–1940) and resettlement (1946–1966) marriage cohorts. The authors applied log-linear models to census microsamples (N = 1,590,416) to estimate the odds ratios of homogamy versus intermarriage. The unadjusted odds ratios of Japanese Americans declined between cohorts and appeared to be consistent with the assimilation hypothesis. Once compositional influences and educational pairing patterns were adjusted, however, the odds ratios increased and supported the heightened exclusion hypothesis. PMID:21116449

Optoelectronics-related competence building in Japanese and Western firms

NASA Astrophysics Data System (ADS)

Miyazaki, Kumiko

1992-05-01

In this paper, an analysis is made of how different firms in Japan and the West have developed competence related to optoelectronics on the basis of their previous experience and corporate strategies. The sample consists of a set of seven Japanese and four Western firms in the industrial, consumer electronics and materials sectors. Optoelectronics is divided into subfields including optical communications systems, optical fibers, optoelectronic key components, liquid crystal displays, optical disks, and others. The relative strengths and weaknesses of companies in the various subfields are determined using the INSPEC database, from 1976 to 1989. Parallel data are analyzed using OTAF U.S. patent statistics and the two sets of data are compared. The statistical analysis from the database is summarized for firms in each subfield in the form of an intra-firm technology index (IFTI), a new technique introduced to assess the revealed technology advantage of firms. The quantitative evaluation is complemented by results from intensive interviews with the management and scientists of the firms involved. The findings show that there is a marked variation in the way firms' technological trajectories have evolved giving rise to strength in some and weakness in other subfields for the different companies, which are related to their accumulated core competencies, previous core business activities, organizational, marketing, and competitive factors.

Cultural Competence in Business Japanese.

ERIC Educational Resources Information Center

Koike, Shohei

Cultural competence in business Japanese requires more than superficial knowledge of business etiquette. One must truly understand why Japanese people think and act differently from their American counterparts. For example, instruction in the use of Japanese taxis must be accompanied by instruction in the concept and implications of seating order…

10 CFR 434.516 - Building exterior envelope.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Proposed Design, the envelope characteristics of the Proposed Design shall be used. 516.2 Infiltration. For Prototype and Reference Buildings, the infiltration assumptions in subsection 516.2.1 shall be prescribed.... Infiltration shall impact perimeter zones only. 516.2.1 When the HVAC system is switched “on,” no infiltration...

Cost-effective retrofit technology for reducing peak power demand in small and medium commercial buildings

DOE PAGES

Nutaro, James J.; Fugate, David L.; Kuruganti, Teja; ...

2015-05-27

We describe a cost-effective retrofit technology that uses collective control of multiple rooftop air conditioning units to reduce the peak power consumption of small and medium commercial buildings. The proposed control uses a model of the building and air conditioning units to select an operating schedule for the air conditioning units that maintains a temperature set point subject to a constraint on the number of units that may operate simultaneously. A prototype of this new control system was built and deployed in a large gymnasium to coordinate four rooftop air conditioning units. Based on data collected while operating this prototype,more » we estimate that the cost savings achieved by reducing peak power consumption is sufficient to repay the cost of the prototype within a year.« less

Statistics in Japanese universities.

PubMed Central

Ito, P K

1979-01-01

The teaching of statistics in the U.S. and Japanese universities is briefly reviewed. It is found that H. Hotelling's articles and subsequent relevant publications on the teaching of statistics have contributed to a considerable extent to the establishment of excellent departments of statistics in U.S. universities and colleges. Today the U.S. may be proud of many well-staffed and well-organized departments of theoretical and applied statistics with excellent undergraduate and graduate programs. On the contrary, no Japanese universities have an independent department of statistics at present, and the teaching of statistics has been spread among a heterogeneous group of departments of application. This was mainly due to the Japanese government regulation concerning the establishment of a university. However, it has recently been revised so that an independent department of statistics may be started in a Japanese university with undergraduate and graduate programs. It is hoped that discussions will be started among those concerned on the question of organization of the teaching of statistics in Japanese universities as soon as possible. PMID:396154

Power API Prototype

DOE Office of Scientific and Technical Information (OSTI.GOV)

2014-12-04

The software serves two purposes. The first purpose of the software is to prototype the Sandia High Performance Computing Power Application Programming Interface Specification effort. The specification can be found at http://powerapi.sandia.gov . Prototypes of the specification were developed in parallel with the development of the specification. Release of the prototype will be instructive to anyone who intends to implement the specification. More specifically, our vendor collaborators will benefit from the availability of the prototype. The second is in direct support of the PowerInsight power measurement device, which was co-developed with Penguin Computing. The software provides a cluster wide measurementmore » capability enabled by the PowerInsight device. The software can be used by anyone who purchases a PowerInsight device. The software will allow the user to easily collect power and energy information of a node that is instrumented with PowerInsight. The software can also be used as an example prototype implementation of the High Performance Computing Power Application Programming Interface Specification.« less

Building of a Disaster Recovery Framework for E-Learning Environment Using Private Cloud Collaboration

ERIC Educational Resources Information Center

Togawa, Satoshi; Kanenishi, Kazuhide

2014-01-01

In this research, we have built a framework of disaster recovery such as against earthquake, tsunami disaster and a heavy floods for e-Learning environment. Especially, our proposed framework is based on private cloud collaboration. We build a prototype system based on IaaS architecture, and this prototype system is constructed by several private…

The spatial frequencies influence the aesthetic judgment of buildings transculturally.

PubMed

Vannucci, Manila; Gori, Simone; Kojima, Haruyuki

2014-01-01

Recent evidence has shown that buildings designed to be high-ranking, according to the Western architectural decorum, have more impact on the minds of their beholders than low-ranking buildings. Here we investigated whether and how the aesthetic judgment for high- and low-ranking buildings was affected by differences in cultural expertise and by power spectrum differences. A group of Italian and Japanese participants performed aesthetic judgment tasks, with line drawings of high- and low-ranking buildings and with their random-phase versions (an image with the exact power spectrum of the original one but non-recognizable anymore). Irrespective of cultural expertise, high-ranking buildings and their relative random-phase versions received higher aesthetic judgments than low-ranking buildings and their random-phase versions. These findings indicate that high- and low-ranking buildings are differentiated for their aesthetic value and they show that low-level visual processes influence the aesthetic judgment based on differences in the stimuli power spectrum, irrespective of the influence of cultural expertise.

The Perils of Prototyping.

ERIC Educational Resources Information Center

Lowry, Christina; Little, Robert

1985-01-01

The benefits of prototyping as a basis for system design include better specifications, earlier discovery of omissions and extensions, and the likelihood of salvaging much of the effort expended on the prototype. Risks and methods of prototyping during rapid systems development are also noted. (Author/MLW)

Basic English Writers' Japanese-English Wordbook.

ERIC Educational Resources Information Center

Daniels, F. J.

The author of this Japanese-English wordbook suggests that it may be used by Japanese writers of English, by those translating from Japanese into English, and by learners of Japanese, in addition to its main intended uses as an aid to the preparation of teaching material and as a work of reference for teachers. A translator will need to supplement…

LENS: Prototyping Program

NASA Astrophysics Data System (ADS)

Rountree, S. Derek

2013-04-01

The Low-Energy Neutrino Spectrometer (LENS) prototyping program is broken into two phases. The first of these is μLENS, a small prototype to study the light transmission in the as built LENS scintillation lattice--- a novel detector method of high segmentation in a large liquid scintillation detector. The μLENS prototype is currently deployed and taking data at the Kimballton Underground Research Facility (KURF) near Virginia Tech. I will discuss the Scintillation Lattice construction methods and schemes of the μLENS program for running with minimal channels instrumented to date ˜41 compared to full coverage 216). The second phase of prototyping is the miniLENS detector for which construction is under way. I will discuss the overall design from the miniLENS Scintillation Lattice to the shielding.

Developing a landscape of urban building energy use with improved spatiotemporal representations in a cool-humid climate

DOE PAGES

Li, Wenliang; Zhou, Yuyu; Cetin, Kristen S.; ...

2018-03-24

Urban buildings account for up to 75% of total energy use in the United States (U.S.). Understanding urban building energy use is important for developing feasible options to mitigate energy use and greenhouse gas emissions. In this study, an improved bottom-up building energy use model, named City Building Energy Use Model (CityBEUM), was developed to estimate building energy use for all buildings in Polk County, Iowa. First, 28 commercial and 6 residential building prototypes were designed by combing Assessor's parcel data and building footprint data. Then, the EnergyPlus in the CityBEUM was calibrated for all building prototypes using the U.S.more » Energy Information Administration's survey data, monthly utility meter data, and actual weather data. Finally, spatial and temporal variations of building energy use in the study area were estimated using the CityBEUM. Results indicate that the spatial variation of building energy use in the study area can be captured using the CityBEUM. With the monthly-calibrated model, the temporal pattern of urban building energy use can be well represented. The comparison of building energy use using the Typical Meteorological Year and actual weather data demonstrates the importance of using actual weather data in building energy modeling for an improved temporal representation.« less

Developing a landscape of urban building energy use with improved spatiotemporal representations in a cool-humid climate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Wenliang; Zhou, Yuyu; Cetin, Kristen S.

Urban buildings account for up to 75% of total energy use in the United States (U.S.). Understanding urban building energy use is important for developing feasible options to mitigate energy use and greenhouse gas emissions. In this study, an improved bottom-up building energy use model, named City Building Energy Use Model (CityBEUM), was developed to estimate building energy use for all buildings in Polk County, Iowa. First, 28 commercial and 6 residential building prototypes were designed by combing Assessor's parcel data and building footprint data. Then, the EnergyPlus in the CityBEUM was calibrated for all building prototypes using the U.S.more » Energy Information Administration's survey data, monthly utility meter data, and actual weather data. Finally, spatial and temporal variations of building energy use in the study area were estimated using the CityBEUM. Results indicate that the spatial variation of building energy use in the study area can be captured using the CityBEUM. With the monthly-calibrated model, the temporal pattern of urban building energy use can be well represented. The comparison of building energy use using the Typical Meteorological Year and actual weather data demonstrates the importance of using actual weather data in building energy modeling for an improved temporal representation.« less

Japanese Nationalism

DTIC Science & Technology

1989-06-01

United States. The chief function of this principle is to cut--it separates all things. It classifies everything into black and white, good and bad . The...content included articles on masturbation , petting, and 99 intercourse. One of Japan’s all time best selling books in recent years, Totto-chan, is a...to the th: every Japanese will be judged by whether he celebrates this or not. That is how people will be determined to be good Japanese or bad 112

The Consortium of Advanced Residential Buildings (CARB) - A Building America Energy Efficient Housing Partnership

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robb Aldrich; Lois Arena; Dianne Griffiths

2010-12-31

This final report summarizes the work conducted by the Consortium of Advanced Residential Buildings (CARB) (http://www.carb-swa.com/), one of the 'Building America Energy Efficient Housing Partnership' Industry Teams, for the period January 1, 2008 to December 31, 2010. The Building America Program (BAP) is part of the Department of Energy (DOE), Energy Efficiency and Renewable Energy, Building Technologies Program (BTP). The long term goal of the BAP is to develop cost effective, production ready systems in five major climate zones that will result in zero energy homes (ZEH) that produce as much energy as they use on an annual basis bymore » 2020. CARB is led by Steven Winter Associates, Inc. with Davis Energy Group, Inc. (DEG), MaGrann Associates, and Johnson Research, LLC as team members. In partnership with our numerous builders and industry partners, work was performed in three primary areas - advanced systems research, prototype home development, and technical support for communities of high performance homes. Our advanced systems research work focuses on developing a better understanding of the installed performance of advanced technology systems when integrated in a whole-house scenario. Technology systems researched included: - High-R Wall Assemblies - Non-Ducted Air-Source Heat Pumps - Low-Load HVAC Systems - Solar Thermal Water Heating - Ventilation Systems - Cold-Climate Ground and Air Source Heat Pumps - Hot/Dry Climate Air-to-Water Heat Pump - Condensing Boilers - Evaporative condensers - Water Heating CARB continued to support several prototype home projects in the design and specification phase. These projects are located in all five program climate regions and most are targeting greater than 50% source energy savings over the Building America Benchmark home. CARB provided technical support and developed builder project case studies to be included in near-term Joule Milestone reports for the following community scale projects: - SBER Overlook at

[The alteration of Japanese anatomical terminology in the early Showa period and the Japanese language reform campaign].

PubMed

Sawai, Tadashi; Sakai, Tatsuo

2010-03-01

In the second decade of the Showa period, great changes were made in the Japanese anatomical terms. It has been proposed that the presentation of JNA (Jenaer nomina anatomica) was one of the factors leading to the change. The Japanese language reform campaign, however, played an important role. The party kokugoaigo doumei and its successor kokugo kyokai required concise and unified technical terms. The anatomical nomenclature committee of the Japanese Association of Anatomists worked to satisfy this requirement. The committee consulted with nomenclature committees of other medical associations and took account of their opinions. The anatomical nomenclature committee abandoned the literal translation from Latin to Japanese and shaped a succinct Japanese terminology. Modern Japanese anatomical terms are based on this terminology.

Business Case Analysis of Prototype Fabrication Division Recapitalization Plan. Summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Booth, Steven Richard; Benson, Faith Ann; Dinehart, Timothy Grant

Business case studies were completed to support procurement of new machines and capital equipment in the Prototype Fabrication (PF) Division SM-39 and TA-03-0102 machine shops. Economic analysis was conducted for replacing the Mazak 30Y Mill-Turn Machine in SM-39, the Haas Vertical CNC Mill in Building 102, and the Hardinge Q10/65-SP Lathe in SM-39. Analysis was also conducted for adding a NanoTech Lathe in Building 102 and a new electrical discharge machine (EDM) in SM-39 to augment current capabilities. To determine the value of switching machinery, a baseline scenario was compared with a future scenario where new machinery was purchased andmore » installed. Costs and benefits were defined via interviews with subject matter experts.« less

Compliment Responses: Comparing American Learners of Japanese, Native Japanese Speakers, and American Native English Speakers

ERIC Educational Resources Information Center

Tatsumi, Naofumi

2012-01-01

Previous research shows that American learners of Japanese (AJs) tend to differ from native Japanese speakers in their compliment responses (CRs). Yokota (1986) and Shimizu (2009) have reported that AJs tend to respond more negatively than native Japanese speakers. It has also been reported that AJs' CRs tend to lack the use of avoidance or…

Building a Prototype of LHC Analysis Oriented Computing Centers

NASA Astrophysics Data System (ADS)

Bagliesi, G.; Boccali, T.; Della Ricca, G.; Donvito, G.; Paganoni, M.

2012-12-01

A Consortium between four LHC Computing Centers (Bari, Milano, Pisa and Trieste) has been formed in 2010 to prototype Analysis-oriented facilities for CMS data analysis, profiting from a grant from the Italian Ministry of Research. The Consortium aims to realize an ad-hoc infrastructure to ease the analysis activities on the huge data set collected at the LHC Collider. While “Tier2” Computing Centres, specialized in organized processing tasks like Monte Carlo simulation, are nowadays a well established concept, with years of running experience, site specialized towards end user chaotic analysis activities do not yet have a defacto standard implementation. In our effort, we focus on all the aspects that can make the analysis tasks easier for a physics user not expert in computing. On the storage side, we are experimenting on storage techniques allowing for remote data access and on storage optimization on the typical analysis access patterns. On the networking side, we are studying the differences between flat and tiered LAN architecture, also using virtual partitioning of the same physical networking for the different use patterns. Finally, on the user side, we are developing tools and instruments to allow for an exhaustive monitoring of their processes at the site, and for an efficient support system in case of problems. We will report about the results of the test executed on different subsystem and give a description of the layout of the infrastructure in place at the site participating to the consortium.

MyShake: Building a smartphone seismic network

NASA Astrophysics Data System (ADS)

Kong, Q.; Allen, R. M.; Schreier, L.

2014-12-01

We are in the process of building up a smartphone seismic network. In order to build this network, we did shake table tests to evaluate the performance of the smartphones as seismic recording instruments. We also conducted noise floor test to find the minimum earthquake signal we can record using smartphones. We added phone noises to the strong motion data from past earthquakes, and used these as an analogy dataset to test algorithms and to understand the difference of using the smartphone network and the traditional seismic network. We also built a prototype system to trigger the smartphones from our server to record signals which can be sent back to the server in near real time. The phones can also be triggered by our developed algorithm running locally on the phone, if there's an earthquake occur to trigger the phones, the signal recorded by the phones will be sent back to the server. We expect to turn the prototype system into a real smartphone seismic network to work as a supplementary network to the existing traditional seismic network.

Contam airflow models of three large buildings: Model descriptions and validation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Black, Douglas R.; Price, Phillip N.

2009-09-30

Airflow and pollutant transport models are useful for several reasons, including protection from or response to biological terrorism. In recent years they have been used for deciding how many biological agent samplers are needed in a given building to detect the release of an agent; to figure out where those samplers should be located; to predict the number of people at risk in the event of a release of a given size and location; to devise response strategies in the event of a release; to determine optimal trade-offs between sampler characteristics (such as detection limit and response time); and somore » on. For some of these purposes it is necessary to model a specific building of interest: if you are trying to determine optimal sampling locations, you must have a model of your building and not some different building. But for many purposes generic or 'prototypical' building models would suffice. For example, for determining trade-offs between sampler characteristics, results from one building will carry over other, similar buildings. Prototypical building models are also useful for comparing or testing different algorithms or computational pproaches: different researchers can use the same models, thus allowing direct comparison of results in a way that is not otherwise possible. This document discusses prototypical building models developed by the Airflow and Pollutant Transport Group at Lawrence Berkeley National Laboratory. The models are implemented in the Contam v2.4c modeling program, available from the National Institutes for Standards and Technology. We present Contam airflow models of three virtual buildings: a convention center, an airport terminal, and a multi-story office building. All of the models are based to some extent on specific real buildings. Our goal is to produce models that are realistic, in terms of approximate magnitudes, directions, and speeds of airflow and pollutant transport. The three models vary substantially in detail. The

Disability and stigma: how Japanese educators help parents accept their children's differences.

PubMed

Kayama, Misa; Haight, Wendy

2014-01-01

In this report, part of a larger ethnographic study, the authors examined the support Japanese elementary school educators provide to parents of children with relatively mild cognitive and behavioral disabilities, such as learning disabilities, attention deficit/hyperactivity disorders, and high-functioning autism. Conditions that affect children's learning and behaviors are widespread, but cultures vary in responses to children with such difficulties and their families. In many cultures, disability remains a sensitive issue due to lingering stigma. Japan's recent implementation of special education services for children with mild cognitive and behavioral disabilities provided a unique context in which to examine otherwise taken-for-granted beliefs and practices related to disability. Participant observations in a Japanese elementary school and individual interviews with educators and parents suggest that parents' sensitivity to other people's "eyes," or stigma, can be an obstacle to their acceptance of their children's need for special education, permission for their children to receive services, and collaboration with educators. Educators supported parents through a steadfast focus on emotional support, communication, relationship building, and partnerships. Japanese practices and adults' reflections on stigma provide a broader context for international, school, and other social workers to reflect on their own beliefs and practices with families of children with disabilities.

Japanese American Identity Dilemma.

ERIC Educational Resources Information Center

Maykovich, Minako K.

The major theme of this book is the label "Quiet American" for the Japanese American. In order to locate Japanese Americans sociologically and psychologically in the structure of American society, various concepts such as "marginal man,""alienation," and "inauthenticity" are examined, specifying these…

Population structure in Japanese rice population

PubMed Central

Yamasaki, Masanori; Ideta, Osamu

2013-01-01

It is essential to elucidate genetic diversity and relationships among even related individuals and populations for plant breeding and genetic analysis. Since Japanese rice breeding has improved agronomic traits such as yield and eating quality, modern Japanese rice cultivars originated from narrow genetic resource and closely related. To resolve the population structure and genetic diversity in Japanese rice population, we used a total of 706 alleles detected by 134 simple sequence repeat markers in a total of 114 cultivars composed of 94 improved varieties and 20 landraces, which are representative and important for Japanese rice breeding. The landraces exhibit greater gene diversity than improved lines, suggesting that landraces can provide additional genetic diversity for future breeding. Model-based Bayesian clustering analysis revealed six subgroups and admixture situation in the cultivars, showing good agreement with pedigree information. This method could be superior to phylogenetic method in classifying a related population. The leading Japanese rice cultivar, Koshihikari is unique due to the specific genome constitution. We defined Japanese rice diverse sets that capture the maximum number of alleles for given sample sizes. These sets are useful for a variety of genetic application in Japanese rice cultivars. PMID:23641181

Lessons learned from the 2016 Kumamoto earthquake: Building damages and behavior of seismically isolated buildings

NASA Astrophysics Data System (ADS)

Morita, Keiko; Takayama, Mineo

2017-10-01

Powerful earthquakes stuck Kumamoto and Oita Prefectures in Kyushu, Japan. It began with the Magnitude 6.5 foreshock at 21:26 JST 14 April, followed by the Magnitude 7.3 mainshock at 1:25 JST 16 April, 2016. The sequence earthquakes also involved more than 1700 perceptible earthquakes as of 13 June. The entire sequence was named the 2016 Kumamoto earthquake by the Japan Meteorological Agency. Thousands of buildings and many roads were damaged, and landslides occurred. The Japanese building standard law is revised in 1981. Structural damages were concentrated on buildings constructed prior to 1981. The area of Mashiki and Southern Aso were most badly affected, especially wooden houses extremely damaged. In Japan, Prof. Hideyuki Tada (title at the time) undertook research on laminated rubber bearings in 1978, and put it into practical use in 1981. The single family house at Yachiyodai, Chiba Prefecture is completed in 1983, it's the first seismically isolated building which is installed laminated rubber bearings in Japan. Afterward, this system is gradually adopted to mainly office buildings, like a research laboratory, a hospital, a computer center and other offices. In the 1994 Northridge earthquake, the 1995 Kobe earthquake and 2011 Tohoku earthquake, seismically isolated buildings improve these good performances, and recently number of the buildings have increased, mainly high risk area of earthquakes. Many people believed that Kumamoto was a low risk area. But there were 24 seismically isolated buildings in Kumamoto Prefecture at the time. The seismically isolated buildings indicated excellent performances during the earthquakes. They protected people, buildings and other important facilities from damages caused by the earthquake. The purpose of this paper is to discuss lessons learned from the 2016 Kumamoto earthquake and behavior of seismically isolated buildings in the earthquake.

Non-Native Japanese Listeners' Perception of Vowel Length Contrasts in Japanese and Modern Standard Arabic (MSA)

ERIC Educational Resources Information Center

Tsukada, Kimiko

2012-01-01

This study aimed to compare the perception of short vs. long vowel contrasts in Japanese and Modern Standard Arabic (MSA) by four groups of listeners differing in their linguistic backgrounds: native Arabic (NA), native Japanese (NJ), non-native Japanese (NNJ) and Australian English (OZ) speakers. The NNJ and OZ groups shared the first language…

Body composition and anthropometry in Japanese and Australian Caucasian males and Japanese females.

PubMed

Kagawa, Masaharu; Binns, Colin B; Hills, Andrew P

2007-01-01

The total amount and location of fat deposition are important factors in the development of obesity and the metabolic syndrome. To date there have been no reported studies of ethnic and gender differences in body composition and fat distribution patterns in Japanese and Australian young adults. The aim of this study was to assess body composition of young Japanese and Australian Caucasian adults using whole-body dual energy x-ray absorptiometry (DXA) and anthropometry to examine body fat deposition patterns. Body composition of 45 Japanese males and 42 Australian Caucasian males living in Australia (aged 18-40 years) and 139 Japanese females living in Japan (aged 18-27 years) were measured using whole-body DXA scanning and anthropometry. Differences in relationships between BMI and waist circumference (WC), sum of skinfolds (SigmaSF) and %BF obtained from DXA were assessed using multivariate analyses. Distinct gender and ethnic differences (p<0.05) in bone density and waist circumference were observed but no gender differences in BMI and bone mineral content and no ethnic differences in sum of skinfolds and %BF. Both Japanese males and females showed a greater %BF at given BMI, WC and SigmaSF values (p<0.05). The results indicate differences in relationships between %BF and anthropometric measures in young Japanese compared to Caucasians and the importance of population-specific cut-off points for these indices. These findings also have implications for the development of chronic disease and further research, including studies in other Asian countries, is recommended.

The Japanese containerless experiments

NASA Technical Reports Server (NTRS)

Azuma, Hisao

1990-01-01

There are three sets of Japanese containerless experiments. The first is Drop dynamics research. It consists of acoustic levitation and large amplitude drop oscillation. The second is Optical materials processing in an acoustic levitation furnace. And the third is Electrostatic levitator development by two different Japanese companies.

Intercultural Communication Problems in Japanese Multinationals.

ERIC Educational Resources Information Center

Nishiyama, Kazuo

Many large Japanese-owned multinational corporations have established successful subsidiaries in the United States, but distinct ethnic and cultural differences have caused communication problems between Japanese managers and American laborers and business people. Many top executives of the Japanese subsidiaries are sent to the United States on a…

Shattering Myths: Japanese American Educational Issues.

ERIC Educational Resources Information Center

Yoshiwara, Florence M.

An historical review of the immigration and resettlement patterns, and a demographic profile of Japanese Americans reveals a myth of the "successful minority." Since the founding of the Japanese American Citizens League in 1928, Japanese Americans have defeated alien land laws, discriminatory immigration quotas, anti-miscengenation laws,…

[History of Japanese Committee for Anatomical Nomenclature].

PubMed

Kimura, Kunihiko

2008-12-01

This paper records a history of the Japanese Committee of Anatomical Nomenclature since 1990, as a supplement to the previous report (1991), explains a progressing of the edition of Japanese medical terms by the Japanese Association of Medical Sciences and the Ministry of Education, Sciences and Culture, and points out of some problems on terms in Japanese.

Japanese Media in English.

ERIC Educational Resources Information Center

Tanaka, Sachiko Oda

1995-01-01

Describes the use of English in the media in Japan, focusing on the role and history of English-language newspapers, radio, and television programs, as well as the proliferation of English-language films shown in Japanese cinemas. Discusses the implications of English in the Japanese media. (20 references) (MDM)

Ordinal Expressions in Japanese. Papers in Japanese Linguistics, Vol. 2, No. 1.

ERIC Educational Resources Information Center

Backus, Robert L.

The varied forms and semantic factors of Japanese ordinal expressions are related to one another in a coherent system. In Japanese, the cardinal number form is a numeral compound in construction with a referent. The numeral compound consists of a number and a numeral adjunct. Numeral adjuncts are derived from bound forms, or numeral suffixes, and…

A failure management prototype: DR/Rx

NASA Technical Reports Server (NTRS)

Hammen, David G.; Baker, Carolyn G.; Kelly, Christine M.; Marsh, Christopher A.

1991-01-01

This failure management prototype performs failure diagnosis and recovery management of hierarchical, distributed systems. The prototype, which evolved from a series of previous prototypes following a spiral model for development, focuses on two functions: (1) the diagnostic reasoner (DR) performs integrated failure diagnosis in distributed systems; and (2) the recovery expert (Rx) develops plans to recover from the failure. Issues related to expert system prototype design and the previous history of this prototype are discussed. The architecture of the current prototype is described in terms of the knowledge representation and functionality of its components.

Japanese Interest in “Hotaru” (Fireflies) and “Kabuto-Mushi” (Japanese Rhinoceros Beetles) Corresponds with Seasonality in Visible Abundance

PubMed Central

Takada, Kenta

2012-01-01

Seasonal changes in the popularity of fireflies [usually Genji-fireflies (Luciola cruciata Motschulsky) in Japan] and Japanese rhinoceros beetles [Allomyrina dichotoma (Linne)] were investigated to examine whether contemporary Japanese are interested in visible emergence of these insects as seasonal events. The popularity of fireflies and Japanese rhinoceros beetles was assessed by the Google search volume of their Japanese names, “Hotaru” and “Kabuto-mushi” in Japanese Katakana script using Google Trends. The search volume index for fireflies and Japanese rhinoceros beetles was distributed across seasons with a clear peak in only particular times of each year from 2004 to 2011. In addition, the seasonal peak of popularity for fireflies occurred at the beginning of June, whereas that for Japanese rhinoceros beetles occurred from the middle of July to the beginning of August. Thus seasonal peak of each species coincided with the peak period of the emergence of each adult stage. These findings indicated that the Japanese are interested in these insects primarily during the time when the two species are most visibly abundant. Although untested, this could suggest that fireflies and Japanese rhinoceros beetles are perceived by the general public as indicators or symbols of summer in Japan. PMID:26466535

First Course in Japanese: Character Workbook.

ERIC Educational Resources Information Center

Niwa, Tamako

This character workbook is an introduction to Japanese writing designed to be used in conjunction with Parts One and Two of this introductory course in Japanese. All the "hiragana", several "katakana", and 88 Japanese characters are introduced in this text. The workbook, consisting of 30 lessons, is divided into three parts.…

Developing Instructional Materials for Business Japanese.

ERIC Educational Resources Information Center

Koike, Shohei

Business Japanese should be the study of Japanese language and culture for business communication and should include values and beliefs and institutional constraints on which the Japanese act as well as business etiquette and terminology. Topics to be covered in instruction will vary depending on the role (seller, buyer, or colleague) played by…

Japanese Quality Control Circles.

ERIC Educational Resources Information Center

Nishiyama, Kazuo

In recent years, United States scholars with an interest in international business and organizational communication have begun to notice the success of Japanese "quality control circles." These are small groups, usually composed of seven to ten workers, who are organized at the production levels within most large Japanese factories. A…

Application of Rapid Prototyping Methods to High-Speed Wind Tunnel Testing

NASA Technical Reports Server (NTRS)

Springer, A. M.

1998-01-01

This study was undertaken in MSFC's 14-Inch Trisonic Wind Tunnel to determine if rapid prototyping methods could be used in the design and manufacturing of high speed wind tunnel models in direct testing applications, and if these methods would reduce model design/fabrication time and cost while providing models of high enough fidelity to provide adequate aerodynamic data, and of sufficient strength to survive the test environment. Rapid prototyping methods utilized to construct wind tunnel models in a wing-body-tail configuration were: fused deposition method using both ABS plastic and PEEK as building materials, stereolithography using the photopolymer SL-5170, selective laser sintering using glass reinforced nylon, and laminated object manufacturing using plastic reinforced with glass and 'paper'. This study revealed good agreement between the SLA model, the metal model with an FDM-ABS nose, an SLA nose, and the metal model for most operating conditions, while the FDM-ABS data diverged at higher loading conditions. Data from the initial SLS model showed poor agreement due to problems in post-processing, resulting in a different configuration. A second SLS model was tested and showed relatively good agreement. It can be concluded that rapid prototyping models show promise in preliminary aerodynamic development studies at subsonic, transonic, and supersonic speeds.

Algorithmic design for 3D printing at building scale

DOE PAGES

Guerguis, Maged; Eikevik, Leif; Obendorf, Andrew; ...

2017-01-01

Here, this paper addresses the use of algorithmic design paired with additive manufacturing and their potential impact on architectural design and fabrication of a full-sized building, as demonstrated with the AMIE project. AMIE (Additive Manufacturing and Integrated Energy) was collaboration to 3d print a building and vehicle. Both the car and building were designed to generate, store and share energy in an effort to reduce or eliminate reliability on the power grid. This paper is intended to outline our methodology in successfully designing for these innovative strategies, with a focus on the use of computational design tools as a catalystmore » for design optimization, integrated project delivery, rapid prototyping and fabrication of building elements using additive manufacturing.« less

Algorithmic design for 3D printing at building scale

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guerguis, Maged; Eikevik, Leif; Obendorf, Andrew

Here, this paper addresses the use of algorithmic design paired with additive manufacturing and their potential impact on architectural design and fabrication of a full-sized building, as demonstrated with the AMIE project. AMIE (Additive Manufacturing and Integrated Energy) was collaboration to 3d print a building and vehicle. Both the car and building were designed to generate, store and share energy in an effort to reduce or eliminate reliability on the power grid. This paper is intended to outline our methodology in successfully designing for these innovative strategies, with a focus on the use of computational design tools as a catalystmore » for design optimization, integrated project delivery, rapid prototyping and fabrication of building elements using additive manufacturing.« less

Presence Personalization and Persistence: A New Approach to Building Archives to Support Collaborative Research

NASA Technical Reports Server (NTRS)

McGlynn, Thomas A.

2008-01-01

We discuss approaches to building archives that support the way most science is done. Today research is done in formal teams and informal groups. However our on-line services are designed to work with a single user. We have begun prototyping a new approach to building archives in which support for collaborative research is built in from the start. We organize the discussion along three elements that we believe to be necessary for effective support: We must enable user presence in the archive environment; users must be able to interact. Users must be able to personalize the environment, adding data and capabilities useful to themselves and their team. These changes must be persistent: subsequent sessions must be able to build upon previous sessions. In building the archive we see the large multi-player interactive games as a paradigm of how this approach can work. These three 'P's are essential in gaming as well and we shall use insights from the gaming world and virtual reality systems like Second Life in our prototype.

Generations and Identity: The Japanese American.

ERIC Educational Resources Information Center

Kitano, Harry H. L.

The story of people of Japanese descent in the United States is told in its historic context. The Japanese came to America with cultural values that differed greatly from the mainstream U.S. society. They were also set apart by appearance. Conflict between Japan and the United States exacerbated the problems between the Japanese Americans and the…

The Work Values of Japanese Women.

ERIC Educational Resources Information Center

Engel, John W.

Empirical studies of Japanese work ethics have tended to focus on male workers while neglecting women. In addition, work values in both Japan and the United States appear to be changing. More information is needed on the work values of American and Japanese female workers. A study was conducted to explore the work ethics of Japanese women and to…

Automated Rapid Prototyping of 3D Ceramic Parts

NASA Technical Reports Server (NTRS)

McMillin, Scott G.; Griffin, Eugene A.; Griffin, Curtis W.; Coles, Peter W. H.; Engle, James D.

2005-01-01

An automated system of manufacturing equipment produces three-dimensional (3D) ceramic parts specified by computational models of the parts. The system implements an advanced, automated version of a generic rapid-prototyping process in which the fabrication of an object having a possibly complex 3D shape includes stacking of thin sheets, the outlines of which closely approximate the horizontal cross sections of the object at their respective heights. In this process, the thin sheets are made of a ceramic precursor material, and the stack is subsequently heated to transform it into a unitary ceramic object. In addition to the computer used to generate the computational model of the part to be fabricated, the equipment used in this process includes: 1) A commercially available laminated-object-manufacturing machine that was originally designed for building woodlike 3D objects from paper and was modified to accept sheets of ceramic precursor material, and 2) A machine designed specifically to feed single sheets of ceramic precursor material to the laminated-object-manufacturing machine. Like other rapid-prototyping processes that utilize stacking of thin sheets, this process begins with generation of the computational model of the part to be fabricated, followed by computational sectioning of the part into layers of predetermined thickness that collectively define the shape of the part. Information about each layer is transmitted to rapid-prototyping equipment, where the part is built layer by layer. What distinguishes this process from other rapid-prototyping processes that utilize stacking of thin sheets are the details of the machines and the actions that they perform. In this process, flexible sheets of ceramic precursor material (called "green" ceramic sheets) suitable for lamination are produced by tape casting. The binder used in the tape casting is specially formulated to enable lamination of layers with little or no applied heat or pressure. The tape is cut

Sparse distributed memory prototype: Principles of operation

NASA Technical Reports Server (NTRS)

Flynn, Michael J.; Kanerva, Pentti; Ahanin, Bahram; Bhadkamkar, Neal; Flaherty, Paul; Hickey, Philip

1988-01-01

Sparse distributed memory is a generalized random access memory (RAM) for long binary words. Such words can be written into and read from the memory, and they can be used to address the memory. The main attribute of the memory is sensitivity to similarity, meaning that a word can be read back not only by giving the original right address but also by giving one close to it as measured by the Hamming distance between addresses. Large memories of this kind are expected to have wide use in speech and scene analysis, in signal detection and verification, and in adaptive control of automated equipment. The memory can be realized as a simple, massively parallel computer. Digital technology has reached a point where building large memories is becoming practical. The research is aimed at resolving major design issues that have to be faced in building the memories. The design of a prototype memory with 256-bit addresses and from 8K to 128K locations for 256-bit words is described. A key aspect of the design is extensive use of dynamic RAM and other standard components.

Technological Diversification of Japanese Industry.

ERIC Educational Resources Information Center

Kodama, Fumio

1986-01-01

Describes an approach for measuring industrial technological diversification behavior. Identifies sectoral patterns of Japanese industry as related to diversification behaviors. Delineates the mechanisms and effectiveness of Japanese corporate and government policies relevant to diversification. (ML)

Modalities of Infant-Mother Interaction in Japanese, Japanese American Immigrant, and European American Dyads

PubMed Central

Bornstein, Marc H.; Cote, Linda R.; Haynes, O. Maurice; Suwalsky, Joan T. D.; Bakeman, Roger

2011-01-01

Cultural variation in relations and moment-to-moment contingencies of infant-mother person-oriented and object-oriented interactions were examined and compared in 118 Japanese, Japanese American immigrant, and European American dyads with 5.5-month-olds. Infant and mother person-oriented behaviors were positively related in all cultural groups, but infant and mother object-oriented behaviors were positively related only among European Americans. In all groups, infant and mother behaviors within each modality were mutually contingent. Culture moderated lead-lag relations: Japanese infants were more likely than their mothers to respond in object-oriented interactions, European American mothers were more likely than their infants to respond in person-oriented interactions. Japanese American dyads behaved more like European American dyads. Interaction, infant effects, and parent socialization findings are set in cultural and accultural models of transactions between young infants and their mothers. PMID:22860874

Pretending to Be Japanese: Artistic Play in a Japanese-American Church and Family

ERIC Educational Resources Information Center

Goto, Courtney T.

2008-01-01

With high rates of out-marriage and dwindling need for bilingual worship, Japanese-American churches face a critical question: "Why retain the Japanese part of our identity?" This article explores how one layperson (Naomi Takahashi Goto) draws from her experience as an artist, teacher, and mother to help her congregation answer this question.…

Living in the tide of change: explaining Japanese subjective health from the socio-demographic change

PubMed Central

Hitokoto, Hidefumi; Tanaka-Matsumi, Junko

2014-01-01

Today, countries around the world are caught in the tide of change toward Gesellshaft, or individualistic socio-demographic condition. Recent investigations in Japan have suggested negative impacts of change on emotional and motivational aspects of the Japanese self (Norasakkunkit et al., 2012; Ogihara and Uchida, 2014). Building on previous findings, in Study 1, we measured socio-demographic change toward individualistic societal condition during 1990–2010—two decades marked by great economic recession—at the levels of prefecture and city using archival data. In Study 2, we tested whether Japanese adults' general health, satisfaction with life, self-esteem, and perceived social support were negatively predicted by the change using social survey. Results of hierarchical linear modeling showed small but unique negative effects of the change on several health measures, suggesting that this change had an impact on health, above and beyond individual personality traits, and demographics. Additionally, interdependent happiness, the type of cultural happiness grounded in interdependence of the self (Hitokoto and Uchida, 2014), showed an independent positive relationship with all aspects of health examined. Implications for health studies in changing socio-demographic condition are discussed in the context of Japanese society after economic crisis. PMID:25400604

Prototype-Incorporated Emotional Neural Network.

PubMed

Oyedotun, Oyebade K; Khashman, Adnan

2017-08-15

Artificial neural networks (ANNs) aim to simulate the biological neural activities. Interestingly, many ''engineering'' prospects in ANN have relied on motivations from cognition and psychology studies. So far, two important learning theories that have been subject of active research are the prototype and adaptive learning theories. The learning rules employed for ANNs can be related to adaptive learning theory, where several examples of the different classes in a task are supplied to the network for adjusting internal parameters. Conversely, the prototype-learning theory uses prototypes (representative examples); usually, one prototype per class of the different classes contained in the task. These prototypes are supplied for systematic matching with new examples so that class association can be achieved. In this paper, we propose and implement a novel neural network algorithm based on modifying the emotional neural network (EmNN) model to unify the prototype- and adaptive-learning theories. We refer to our new model as ``prototype-incorporated EmNN''. Furthermore, we apply the proposed model to two real-life challenging tasks, namely, static hand-gesture recognition and face recognition, and compare the result to those obtained using the popular back-propagation neural network (BPNN), emotional BPNN (EmNN), deep networks, an exemplar classification model, and k-nearest neighbor.

New Frontiers for Japanese Youth

ERIC Educational Resources Information Center

Tucker, Frank H.

1974-01-01

Japanese literature, television, movies, and school texts from 1935 to 1955 are analyzed for their influence and contribution to Japanese youths' pioneering spirit and frontiermindedness. "Asian Affairs" is published by the American-Asian Educational Exchange, New York. (DE)

8 CFR 349.1 - Japanese renunciation of nationality.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Japanese renunciation of nationality. 349.1... NATIONALITY § 349.1 Japanese renunciation of nationality. A Japanese who renounced United States nationality... void, shall complete Form N-576, Supplemental Affidavit to be Submitted with Applications of Japanese...

Prototype Effect and the Persuasiveness of Generalizations.

PubMed

Dahlman, Christian; Sarwar, Farhan; Bååth, Rasmus; Wahlberg, Lena; Sikström, Sverker

An argument that makes use of a generalization activates the prototype for the category used in the generalization. We conducted two experiments that investigated how the activation of the prototype affects the persuasiveness of the argument. The results of the experiments suggest that the features of the prototype overshadow and partly overwrite the actual facts of the case. The case is, to some extent, judged as if it had the features of the prototype instead of the features it actually has. This prototype effect increases the persuasiveness of the argument in situations where the audience finds the judgment more warranted for the prototype than for the actual case (positive prototype effect), but decreases persuasiveness in situations where the audience finds the judgment less warranted for the prototype than for the actual case (negative prototype effect).

Lifestyle characteristics assessment of Japanese in Pittsburgh, USA.

PubMed

Hirooka, Nobutaka; Takedai, Teiichi; D'Amico, Frank

2012-04-01

Lifestyle-related chronic diseases such as cancer and cardiovascular disease are the greatest public health concerns. Evidence shows Japanese immigrants to a westernized environment have higher incidence of lifestyle-related diseases. However, little is known about lifestyle characteristics related to chronic diseases for Japanese in a westernized environment. This study is examining the gap in lifestyle by comparing the lifestyle prevalence for Japanese in the US with the Japanese National Data (the National Health and Nutrition Survey in Japan, J-NHANS) as well as the Japan National Health Promotion in the twenty-first Century (HJ21) goals. Japanese adults were surveyed in Pittsburgh, USA, regarding their lifestyle (e.g., diet, exercise, smoking, stress, alcohol, and oral hygiene). The prevalence was compared with J-NHANS and HJ21 goals. Ninety-three responded (response rate; 97.9%). Japanese men (n = 38) and women (n = 55) in Pittsburgh smoke less than Japanese in Japan (P < 0.001 for both genders). Japanese in Pittsburgh perform less physical activity in daily life and have lower prevalence of walking more than 1 h per day (P < 0.001 for both genders). Japanese women in Pittsburgh have significantly higher prevalence of stress than in Japan (P = 0.004). Japanese men in Pittsburgh do not reach HJ21 goal in weight management, BMI, use of medicine or alcohol to sleep, and sleep quality. Japanese women in Pittsburgh do not reach HJ21 goal in weight management and sleep quality. In conclusion, healthy lifestyle promotion including exercise and physical activity intervention for Japanese living in a westernized environment is warranted.

IS-EPOS - a prototype of EPOS Thematic Core Service for seismic processes induced by human operations

NASA Astrophysics Data System (ADS)

Orlecka-Sikora, Beata; Lasocki, Stanislaw; Leptokaropoulos, Konstantinos

2014-05-01

The community focused on seismic processes induced by human operations has been organized within EPOS Integration Program as Working Group 10 Infrastructure for Georesources. This group has brought together representatives from the scientific community and industry from 13 European countries. WG10 aims to integrate the research infrastructure (RI) in the area of seismicity induced (IS) by human activity: tremors and rockbursts in underground mines, seismicity associated with conventional and unconventional oil and gas production, induced by geothermal energy extraction and by underground reposition and storage of liquids (e.g. water disposal associated with energy extraction) and gases (CO2 sequestration, inter alia) and triggered by filling surface water reservoirs, etc. WG10 priority is to create new research opportunities in the field responding to global challenges connected with exploitation of georesources. WG10 has prepared the model of integration fulfilling the scientific mission and raising the visibility of stakeholders. The end-state Induced Seismicity Thematic Core Service (IS TCS) has been designed together with key metrics for TCS benefits in four areas: scientific, societal, economic and capacity building. IS-EPOS project, funded by National Centre for Research and Development, Poland within the program "Innovative Economy Operational Program Priority Axis 2 - R&D Infrastructure", aims at building a prototype of IS TCS. The prototype will implement fully the designed logic of IS TCS. Research infrastructure integrated within the prototype will comprise altogether seven comprehensive data cases of seismicity linked to deep mining related, associating geothermal production and triggered by reservoir impoundment. The implemented thematic services will enable studies within the use-case "Clustering of induced earthquakes". The IS TCS prototype is expected to reach full functionality by the end of 2014.

Some Design Issues for an Online Japanese Textbook

ERIC Educational Resources Information Center

Nagata, Noriko

2010-01-01

This paper discusses several design issues in the development of a new online Japanese textbook, called "Robo-Sensei: Japanese Curriculum with Automated Feedback". When it is completed, the new online textbook will present a full Japanese curriculum. It extends a previously published online software program, "Robo-Sensei: Personal Japanese Tutor"…

The Semantics and Pragmatics of Japanese Focus Particles

ERIC Educational Resources Information Center

Hasegawa, Akio

2011-01-01

Japanese has a rich set of focus particles, several exclusive and additive particles, and, in addition, contrastive particles. This thesis provides a formal description of the meanings of Japanese focus particles and addresses two general questions: "What kinds concepts do Japanese focus particles express?" and "Why does Japanese have a larger…

Re-Examining Patriotism in Japanese Education: Analysis of Japanese Elementary School Moral Readers

ERIC Educational Resources Information Center

Anzai, Shinobu

2015-01-01

In 1947 the Fundamental Law of Education (FLE) defined the pacifist principles for post-war Japanese education and was revised in 2006 for the first time in nearly 60 years. The revised FLE stipulates the importance of teaching love for country and region and Japanese culture and traditions with special emphasis on moral education. Today, this…

From prototype to production system: lessons learned from the evolution of the SignOut System at Mount Sinai Medical Center.

PubMed

Kushniruk, Andre; Karson, Tom; Moore, Carlton; Kannry, Joseph

2003-01-01

Approaches to the development of information systems in large health care institutions range from prototyping to conventional development of large scale production systems. This paper discusses the development of the SignOut System at Mount Sinai Medical Center, which was designed in 1997 to capture vital resident information. Local need quickly outstripped proposed delays for building a production system and a prototype system quickly became a production system. By the end of 2002 the New SignOut System was built to create an integrated application that was a true production system. In this paper we discuss the design and implementation issues in moving from a prototype to a production system. The production system had a number of advantages, including increased organizational visibility, integration into enterprise resource planning and full time staff for support. However, the prototype allowed for more rapid design and subsequent changes, less training, and equal to or superior help desk support. It is argued that healthcare IT systems may need characteristics of both prototype and production system development to rapidly meet the changing and different needs of healthcare user populations.

Transforming paper-based assessment forms to a digital format: Exemplified by the Housing Enabler prototype app.

PubMed

Svarre, Tanja; Lunn, Tine Bieber Kirkegaard; Helle, Tina

2017-11-01

The aim of this paper is to provide the reader with an overall impression of the stepwise user-centred design approach including the specific methods used and lessons learned when transforming paper-based assessment forms into a prototype app, taking the Housing Enabler as an example. Four design iterations were performed, building on a domain study, workshops, expert evaluation and controlled and realistic usability tests. The user-centred design process involved purposefully selected participants with different Housing Enabler knowledge and housing adaptation experience. The design iterations resulted in the development of a Housing Enabler prototype app. The prototype app has several features and options that are new compared with the original paper-based Housing Enabler assessment form. These new features include a user friendly overview of the assessment form; easy navigation by swiping back and forth between items; onsite data analysis; and ranking of the accessibility score, photo documentation and a data export facility. Based on the presented stepwise approach, a high-fidelity Housing Enabler prototype app was successfully developed. The development process has emphasized the importance of combining design participants' knowledge and experiences, and has shown that methods should seem relevant to participants to increase their engagement.

Scores on morningness-eveningness and sleep habits of Korean students, Japanese students, and Japanese workers.

PubMed

Park, Y M; Matsumoto, K; Seo, Y J; Shinkoda, H; Park, K P

1997-08-01

The Morningness-Eveningness Questionnaire and Life Habits Inventory were given to three groups of the same mean age: 533 Korean students, 468 Japanese students, and 311 Japanese workers. The distributions of scores on the questionnaire for these three groups are normal; however the Japanese students' distribution was slightly skewed towards the Evening type. The self-reported waking times and bedtimes for the three groups were late in the order of Morning, Intermediate, and Evening types. It is noteworthy, however, that the Korean students woke earlier than the Japanese students, and the workers always went to bed and woke earlier than the students. For the groups the variations in bedtime, waking time, and length of sleep were large, the sleep latency was long, and mood of the participants upon waking was bad in the order of the Morning. Intermediate, and Evening types. The scores of the Korean students were distributed more highly in the Morning type than were the Japanese students', but the students' sleep habits in both countries were quite similar. The subjects categorized as Evening types had more irregular sleep habits than those of the Morning type. In comparison with the student groups, Japanese workers of the same mean age had higher scores and slightly different sleep habits. The change in sleep habits could be seen as a result of the demands of employment, and the probable basis for difference in scores.

Japanese Characters in Written Japanese.

ERIC Educational Resources Information Center

Buck, James H.

From the sixth to the eighth century A.D., Japan was the recipient of massive cultural infusions from China. This acceptance of the Chinese pattern included, and to a great extent was based on, the acceptance of the Chinese language. The Chinese writing system was applied to Japanese because there was no other model to follow and in spite of the…

Rapid Prototyping of Microbial Cell Factories via Genome-scale Engineering

PubMed Central

Si, Tong; Xiao, Han; Zhao, Huimin

2014-01-01

Advances in reading, writing and editing genetic materials have greatly expanded our ability to reprogram biological systems at the resolution of a single nucleotide and on the scale of a whole genome. Such capacity has greatly accelerated the cycles of design, build and test to engineer microbes for efficient synthesis of fuels, chemicals and drugs. In this review, we summarize the emerging technologies that have been applied, or are potentially useful for genome-scale engineering in microbial systems. We will focus on the development of high-throughput methodologies, which may accelerate the prototyping of microbial cell factories. PMID:25450192

Building biological foundries for next-generation synthetic biology.

PubMed

Chao, Ran; Yuan, YongBo; Zhao, HuiMin

2015-07-01

Synthetic biology is an interdisciplinary field that takes top-down approaches to understand and engineer biological systems through design-build-test cycles. A number of advances in this relatively young field have greatly accelerated such engineering cycles. Specifically, various innovative tools were developed for in silico biosystems design, DNA de novo synthesis and assembly, construct verification, as well as metabolite analysis, which have laid a solid foundation for building biological foundries for rapid prototyping of improved or novel biosystems. This review summarizes the state-of-the-art technologies for synthetic biology and discusses the challenges to establish such biological foundries.

Preclinical and clinical development of YFV 17D-based chimeric vaccines against dengue, West Nile and Japanese encephalitis viruses.

PubMed

Guy, Bruno; Guirakhoo, Farshad; Barban, Veronique; Higgs, Stephen; Monath, Thomas P; Lang, Jean

2010-01-08

Dengue viruses (DENV), West Nile virus (WNV) and Japanese encephalitis virus (JEV) are major global health and growing medical problems. While a live-attenuated vaccine exists since decades against the prototype flavivirus, yellow fever virus (YFV), there is an urgent need for vaccines against dengue or West Nile diseases, and for improved vaccines against Japanese encephalitis. Live-attenuated chimeric viruses were constructed by replacing the genes coding for Premembrane (prM) and Envelope (E) proteins from YFV 17D vaccine strain with those of heterologous flaviviruses (ChimeriVax technology). This technology has been used to produce vaccine candidates for humans, for construction of a horse vaccine for West Nile fever, and as diagnostic reagents for dengue, Japanese encephalitis, West Nile and St. Louis encephalitis infections. This review focuses on human vaccines and their characterization from the early stages of research through to clinical development. Phenotypic and genetic properties and stability were examined, preclinical evaluation through in vitro or animal models, and clinical testing were carried out. Theoretical environmental concerns linked to the live and genetically modified nature of these vaccines have been carefully addressed. Results of the extensive characterizations are in accordance with the immunogenicity and excellent safety profile of the ChimeriVax-based vaccine candidates, and support their development towards large-scale efficacy trials and registration.

Japanese/Korean Linguistics, Volume 8.

ERIC Educational Resources Information Center

Silva, David J., Ed.

A collection of research in Japanese and Korean linguistics includes: "Repetition, Reformulation, and Definitions: Prosodic Indexes of Elaboration in Japanese" (Mieko Banno); "Projection of Talk Using Language, Intonation, Deictic and Iconic Gestures and Other Body Movements" (Keiko Emmett); "Turn-taking in Japanese…

Geochemical aspects of some Japanese lavas.

NASA Technical Reports Server (NTRS)

Philpotts, J. A.; Martin, W.; Schnetzler, C. C.

1971-01-01

K, Rb, Sr, Ba and rare-earth concentrations in some Japanese lavas have been determined by mass-spectrometric stable-isotope dilution. The samples fall into three rare-earth groups corresponding to tholeiitic, high alumina and alkali basalts. Japanese tholeiites have trace element characteristics similar to those of oceanic ridge tholeiites except for distinctly higher relative concentrations of Ba. Japanese lavas may result from various degrees of partial fusion of amphibole eclogite.

Phylogeography of Japanese horse chestnut (Aesculus turbinata) in the Japanese Archipelago based on chloroplast DNA haplotypes.

PubMed

Sugahara, Kanako; Kaneko, Yuko; Ito, Satoshi; Yamanaka, Keisuke; Sakio, Hitoshi; Hoshizaki, Kazuhiko; Suzuki, Wajiro; Yamanaka, Norikazu; Setoguchi, Hiroaki

2011-01-01

Japanese horse chestnut (Aesculus turbinata: Hippocastanaceae) is one of the typical woody plants that grow in temperate riparian forests in the Japanese Archipelago. To analyze the phylogeography of this plant in the Japanese Archipelago, we determined cpDNA haplotypes for 337 samples from 55 populations covering the entire distribution range. Based on 1,313 bp of two spacers, we determined ten haplotypes that are distinguished from adjacent haplotypes by one or two steps. Most of the populations had a single haplotype, suggesting low diversity. Spatial analysis of molecular variance suggested three obvious phylogeographic structures in western Japan, where Japanese horse chestnut is scattered and isolated in mountainous areas. Conversely, no clear phylogeographic structure was observed from the northern to the southern limit of this species, including eastern Japan, where this plant is more common. Rare and private haplotypes were also found in southwestern Japan, where Japanese horse chestnuts are distributed sparsely. These findings imply that western Japan might have maintained a relatively large habitat for A. turbinata during the Quaternary climatic oscillations, while northerly regions could not.

Implicit face prototype learning from geometric information.

PubMed

Or, Charles C-F; Wilson, Hugh R

2013-04-19

There is evidence that humans implicitly learn an average or prototype of previously studied faces, as the unseen face prototype is falsely recognized as having been learned (Solso & McCarthy, 1981). Here we investigated the extent and nature of face prototype formation where observers' memory was tested after they studied synthetic faces defined purely in geometric terms in a multidimensional face space. We found a strong prototype effect: The basic results showed that the unseen prototype averaged from the studied faces was falsely identified as learned at a rate of 86.3%, whereas individual studied faces were identified correctly 66.3% of the time and the distractors were incorrectly identified as having been learned only 32.4% of the time. This prototype learning lasted at least 1 week. Face prototype learning occurred even when the studied faces were further from the unseen prototype than the median variation in the population. Prototype memory formation was evident in addition to memory formation of studied face exemplars as demonstrated in our models. Additional studies showed that the prototype effect can be generalized across viewpoints, and head shape and internal features separately contribute to prototype formation. Thus, implicit face prototype extraction in a multidimensional space is a very general aspect of geometric face learning. Copyright © 2013 Elsevier Ltd. All rights reserved.

Novice designers’ use of prototypes in engineering design

PubMed Central

Deininger, Michael; Daly, Shanna R.; Sienko, Kathleen H.; Lee, Jennifer C.

2017-01-01

Prototypes are essential tools in product design processes, but are often underutilized by novice designers. To help novice designers use prototypes more effectively, we must first determine how they currently use prototypes. In this paper, we describe how novice designers conceptualized prototypes and reported using them throughout a design project, and compare reported prototyping use to prototyping best practices. We found that some of the reported prototyping practices by novice designers, such as using inexpensive prototypes early and using prototypes to define user requirements, occurred infrequently and lacked intentionality. Participants’ initial descriptions of prototypes were less sophisticated than how they later described using them and only upon prompted reflection did participants recognize more specific benefits of using prototypes. PMID:29398740

How the Japanese work.

PubMed

Chambers, D W

1998-01-01

The Japanese do not work harder or even use different approaches so much as they aim for a different result--one that balances process and results and extends the definition of quality beyond the product itself to include cost and convenience to the customer as well. Ten methods of the Japanese kaizen culture of work are presented with applications and contrasts to American dentistry.

Japanese Language School: Aid or Hindrance to the Americanization of Japanese Americans in Hawaii?

ERIC Educational Resources Information Center

Shoho, Alan R.

A study examined the experiences of 60 Japanese immigrants to Hawaii (Niseis), aged 61-80, who attended Japanese-language schools as children. Using a case study oral history approach, the study gathered oral testimonies through semi-structured interviews. Historical documents were also used as primary sources of information about the schools.…

Japanese encephalitis - the prospects for new treatments.

PubMed

Turtle, Lance; Solomon, Tom

2018-04-26

Japanese encephalitis is a mosquito-borne disease that occurs in Asia and is caused by Japanese encephalitis virus (JEV), a member of the genus Flavivirus. Although many flaviviruses can cause encephalitis, JEV causes particularly severe neurological manifestations. The virus causes loss of more disability-adjusted life years than any other arthropod-borne virus owing to the frequent neurological sequelae of the condition. Despite substantial advances in our understanding of Japanese encephalitis from in vitro studies and animal models, studies of pathogenesis and treatment in humans are lagging behind. Few mechanistic studies have been conducted in humans, and only four clinical trials of therapies for Japanese encephalitis have taken place in the past 10 years despite an estimated incidence of 69,000 cases per year. Previous trials for Japanese encephalitis might have been too small to detect important benefits of potential treatments. Many potential treatment targets exist for Japanese encephalitis, and pathogenesis and virological studies have uncovered mechanisms by which these drugs could work. In this Review, we summarize the epidemiology, clinical features, prevention and treatment of Japanese encephalitis and focus on potential new therapeutic strategies, based on repurposing existing compounds that are already suitable for human use and could be trialled without delay. We use our newly improved understanding of Japanese encephalitis pathogenesis to posit potential treatments and outline some of the many challenges that remain in tackling the disease in humans.

An approach for assessing software prototypes

NASA Technical Reports Server (NTRS)

Church, V. E.; Card, D. N.; Agresti, W. W.; Jordan, Q. L.

1986-01-01

A procedure for evaluating a software prototype is presented. The need to assess the prototype itself arises from the use of prototyping to demonstrate the feasibility of a design or development stategy. The assessment procedure can also be of use in deciding whether to evolve a prototype into a complete system. The procedure consists of identifying evaluations criteria, defining alterative design approaches, and ranking the alternatives according to the criteria.

Validating the Japanese translation of the Force and Motion Conceptual Evaluation and comparing performance levels of American and Japanese students

NASA Astrophysics Data System (ADS)

Ishimoto, Michi; Thornton, Ronald K.; Sokoloff, David R.

2014-12-01

This study assesses the Japanese translation of the Force and Motion Conceptual Evaluation (FMCE). Researchers are often interested in comparing the conceptual ideas of students with different cultural backgrounds. The FMCE has been useful in identifying the concepts of English-speaking students from different backgrounds. To identify effectively the conceptual ideas of Japanese students and to compare them to those of their English-speaking counterparts, more work is required. Because of differences between the Japanese and English languages, and between the Japanese and American educational systems, it is important to assess the Japanese translation of the FMCE, a conceptual evaluation originally developed in English for American students. To assess its appropriateness, we examined the performance of a large sample of students on the translated version of the FMCE and then compared the results to those of English-speaking students. The data comprise the pretest results of 1095 students, most of whom were first-year students at a midlevel engineering school between 2003 and 2012. Basic statistics and the classical test theory indices of the translated FMCE indicate that its reliability and discrimination are appropriate to assess Japanese students' concepts about force and motion. In general, the preconcepts of Japanese students assessed with the Japanese translation of the FMCE are quite similar to those of American students assessed with the FMCE, thereby supporting the validity of the translated version. However, our findings do show (1) that only a small percentage of Japanese students grasped Newtonian concepts and (2) that the percentage of Japanese students who used two different concept models together to answer some questions seems to be higher than that of American students.

PRMS Data Warehousing Prototype

NASA Technical Reports Server (NTRS)

Guruvadoo, Eranna K.

2001-01-01

Project and Resource Management System (PRMS) is a web-based, mid-level management tool developed at KSC to provide a unified enterprise framework for Project and Mission management. The addition of a data warehouse as a strategic component to the PRMS is investigated through the analysis design and implementation processes of a data warehouse prototype. As a proof of concept, a demonstration of the prototype with its OLAP's technology for multidimensional data analysis is made. The results of the data analysis and the design constraints are discussed. The prototype can be used to motivate interest and support for an operational data warehouse.

PRMS Data Warehousing Prototype

NASA Technical Reports Server (NTRS)

Guruvadoo, Eranna K.

2002-01-01

Project and Resource Management System (PRMS) is a web-based, mid-level management tool developed at KSC to provide a unified enterprise framework for Project and Mission management. The addition of a data warehouse as a strategic component to the PRMS is investigated through the analysis, design and implementation processes of a data warehouse prototype. As a proof of concept, a demonstration of the prototype with its OLAP's technology for multidimensional data analysis is made. The results of the data analysis and the design constraints are discussed. The prototype can be used to motivate interest and support for an operational data warehouse.

The Evolution of a Japanese Theory of Conflict Management and Implications for Japanese Foreign Policy

DTIC Science & Technology

2001-12-01

This thesis explores whether there is a uniquely Japanese method of conflict management Given the delicate balance of stability in Northeast Asia...Japanese leadership needs to use conflict management tools to resolve territorial claims with the governments of China, Russia, and South Korea, Given

Cheilitis Glandularis: Two Case Reports of Asian-Japanese Men and Literature Review of Japanese Cases

PubMed Central

Yanagawa, Toru; Yamaguchi, Akira; Harada, Hiroyuki; Yamagata, Kenji; Ishibashi, Naomi; Noguchi, Masayuki; Onizawa, Kojiro; Bukawa, Hiroki

2011-01-01

Cheilitis glandularis (CG) is a rare disorder characterized by swelling of the lip with hyperplasia of the labial salivary glands. CG is most frequently encountered in the lower lip, in middle-aged to older Caucasian men; however Asian cases were rarely reported. In this paper we present two cases of CG in Asian-Japanese men. One was a 23-year-old male with CG of the superficial suppurative type. The other was a 54-year-old male with deep suppurative type. We also reviewed the Japanese cases of CG in the literature and discussed about clinical feature of Japanese CG. PMID:21991474

Prototyping for LENS

NASA Astrophysics Data System (ADS)

Rasco, B. C.

2012-03-01

The Low-Energy Neutrino Spectroscopy (LENS) experiment will precisely measure the energy spectrum of low-energy solar neutrinos via charged-current neutrino reactions on indium. The LENS detector concept applies indium-loaded scintillator in an optically-segmented lattice geometry to achieve precise time and spatial resolution with unprecedented sensitivity for low-energy neutrino events. The LENS collaboration is currently developing prototypes that aim to demonstrate the performance and selectivity of the technology and to benchmark Monte Carlo simulations that will guide scaling to the full LENS instrument. Currently a 120 liter prototype, microLENS, is operating with pure scintillator (no indium loading) in the Kimballton Underground Research Facility (KURF). We will present results from initial measurements with microLENS and plans for a 400 liter prototype, miniLENS, using indium loaded scintillator that will be installed this summer.

Persistence of Ethnicity: The Japanese of Colorado.

ERIC Educational Resources Information Center

Endo, Russell

This paper presents an overview of the history of Japanese in Colorado. Japanese immigrants first came to Colorado between 1900 and 1910 as railroad laborers. Some became coal miners in southern Colorado; most others became farm laborers. Although the Japanese population during this period was small, communities developed in several locales. The…

Inequities in Japanese Urban Schools

ERIC Educational Resources Information Center

Gordon, June A.

2005-01-01

Interviews with Japanese public school educators allow a distinctive view of how the continuing economic decline in Japan has affected educational motivation and decision-making among students and parents. The nature of socioeconomic stratification within Japanese educational opportunity is seen as a continuing situation exacerbated by the costs…

Sexual partner preference in female Japanese macaques.

PubMed

Vasey, Paul L

2002-02-01

Whether animals ever exhibit a preference for same-sex sexual partners is a subject of debate. Japanese macaques represent excellent models for examining issues related to sexual preference in animals because females, in certain populations, routinely engage in both heterosexual and homosexual behavior over the course of their life spans. Multiple lines of evidence indicate that female homosexual behavior in Japanese macaques is a sexual behavior, not a sociosexual one. Additional evidence indicates that female Japanese macaques do not engage in homosexual behavior simply because acceptable male mates are unavailable or unmotivated to copulate. Patterns of sexual partner choice by female Japanese macaques that are the focus of intersexual competition indicate that females of this species choose same-sex sexual partners even when they are simultaneously presented with a motivated, opposite-sex alternative. Thus, in some populations of Japanese macaques, females prefer certain same-sex sexual partners relative to certain male mates, and vice versa. Taken together, this evidence suggests that female Japanese macaques are best characterized as bisexual in orientation, not preferentially homosexual or preferentially heterosexual.

Effects of internal gain assumptions in building energy calculations

NASA Astrophysics Data System (ADS)

Christensen, C.; Perkins, R.

1981-01-01

The utilization of direct solar gains in buildings can be affected by operating profiles, such as schedules for internal gains, thermostat controls, and ventilation rates. Building energy analysis methods use various assumptions about these profiles. The effects of typical internal gain assumptions in energy calculations are described. Heating and cooling loads from simulations using the DOE 2.1 computer code are compared for various internal gain inputs: typical hourly profiles, constant average profiles, and zero gain profiles. Prototype single-family-detached and multifamily-attached residential units are studied with various levels of insulation and infiltration. Small detached commercial buildings and attached zones in large commercial buildings are studied with various levels of internal gains. The results indicate that calculations of annual heating and cooling loads are sensitive to internal gains, but in most cases are relatively insensitive to hourly variations in internal gains.

A Japanese Agenda for Management Development.

ERIC Educational Resources Information Center

Lim, Howard

1982-01-01

Discusses myths about the Japanese management styles; what the West can learn from the Japanese; the concept of nonlinear management; and training modules which teach self-discipline, tolerance, and nonlinear management. (CT)

Asian Pacific Perspectives: Japanese Americans.

ERIC Educational Resources Information Center

Los Angeles Unified School District, CA.

These instructional materials on Japanese Americans for elementary students were developed through the K.E.Y.S. project (Knowledge of English Yields Success). Information is included on early immigrants, their historical and cultural background, and current problems of Japanese Americans. Resource guides describe the purpose of the unit, how to…

Academic report on burnout among Japanese nurses.

PubMed

Kitaoka, Kazuyo; Masuda, Shinya

2013-12-01

Japanese nurses have increasingly experienced "burnout" in the past several years. Studies on Japanese nurses are required in order to explore how to prevent nursing burnout. The objectives of this report were to: (i) introduce the concept, definition, and measurement of burnout; (ii) look at an overview of the prevalence, possible causes, and consequences of burnout among Japanese nurses; and (iii) explore how to prevent burnout among nurses. The authors and co-researchers have been studying burnout among Japanese workers for more than 15 years. Therefore, previously performed studies were reviewed and summarized. In Japan, approximately 36% of human services professionals, such as nurses, were burned out compared to 18% of civil servants, and 12% of company employees. It was quite obvious that nurses are prone to burnout. The possible causes and consequences of burnout among Japanese nurses were reviewed. Excessive workloads and interpersonal conflict in the workplace were possible causes of burnout among Japanese nurses. The consequences of nurse burnout are potentially very serious, including medical accidents/errors. Issues to prevent nursing burnout were then reviewed. Enhancement of cognitive coping skills for female nurses and problem-solving skills for male nurses could contribute to prevention of burnout in nurses. The authors' previous study revealed that the new model of the organizational context of burnout developed by Leiter and Maslach could be applied to Japanese. Further examination is needed. This report supports the call to scale up burnout prevention strategy for Japanese nurses. © 2012 The Authors. Japan Journal of Nursing Science © 2012 Japan Academy of Nursing Science.

Building America Industrialized Housing Partnership (BAIHP II)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abernethy, Bob; Chandra, Subrato; Baden, Steven

2010-11-30

This report summarizes the work conducted by the Building America Industrialized Housing Partnership (BAIHP - www.baihp.org) during the final budget period (BP5) of our contract, January 1, 2010 to November 30, 2010. Highlights from the four previous budget periods are included for context. BAIHP is led by the Florida Solar Energy Center (FSEC) of the University of Central Florida. With over 50 Industry Partners including factory and site builders, work in BP5 was performed in six tasks areas: Building America System Research Management, Documentation and Technical Support; System Performance Evaluations; Prototype House Evaluations; Initial Community Scale Evaluations; Project Closeout, Finalmore » Review of BA Communities; and Other Research Activities.« less

A prototype feature system for feature retrieval using relationships

USGS Publications Warehouse

Choi, J.; Usery, E.L.

2009-01-01

Using a feature data model, geographic phenomena can be represented effectively by integrating space, theme, and time. This paper extends and implements a feature data model that supports query and visualization of geographic features using their non-spatial and temporal relationships. A prototype feature-oriented geographic information system (FOGIS) is then developed and storage of features named Feature Database is designed. Buildings from the U.S. Marine Corps Base, Camp Lejeune, North Carolina and subways in Chicago, Illinois are used to test the developed system. The results of the applications show the strength of the feature data model and the developed system 'FOGIS' when they utilize non-spatial and temporal relationships in order to retrieve and visualize individual features.

Prototype Abstraction by Monkeys ("Macaca Mulatta")

ERIC Educational Resources Information Center

Smith, J. David; Redford, Joshua S.; Haas, Sarah M.

2008-01-01

The authors analyze the shape categorization of rhesus monkeys ("Macaca mulatta") and the role of prototype- and exemplar-based comparison processes in monkeys' category learning. Prototype and exemplar theories make contrasting predictions regarding performance on the Posner-Homa dot-distortion categorization task. Prototype theory--which…

Cooling energy savings potential of light-colored roofs for residential and commercial buildings in 11 US metropolitan areas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Konopacki, S.; Akbari, H.; Gartland, L.

The U.S. Environmental Protection Agency (EPA) sponsored this project to estimate potential energy and monetary savings resulting from the implementation of light-colored roofs on residential and commercial buildings in major U.S. metropolitan areas. Light-colored roofs reflect more sunlight than dark roofs, so they keep buildings cooler and reduce air-conditioning demand. Typically, rooftops in the United States are dark, and thus there is a potential for saving energy and money by changing to reflective roofs. Naturally, the expected savings are higher in southern, sunny, and cloudless climates. In this study, we make quantitative estimates of reduction in peak power demand andmore » annual cooling electricity use that would result from increasing the reflectivity of the roofs. Since light-colored roofs also reflect heat in the winter, the estimates of annual electricity savings are a net value corrected for the increased wintertime energy use. Savings estimates only include direct reduction in building energy use and do not account for the indirect benefit that would also occur from the reduction in ambient temperature, i.e. a reduction in the heat island effect. This analysis is based on simulations of building energy use, using the DOE-2 building energy simulation program. Our methodology starts with specifying 11 prototypical buildings: single-family residential (old and new), office (old and new), retail store (old and new), school (primary and secondary), health (hospital and nursing home), and grocery store. Most prototypes are simulated with two heating systems: gas furnace and heat pumps. We then perform DOE-2 simulations of the prototypical buildings, with light and dark roofs, in a variety of climates and obtain estimates of the energy use for air conditioning and heating.« less

Japanese Neurosurgeons and Microsurgical Anatomy: A Historical Review

PubMed Central

MATSUSHIMA, Toshio; KAWASHIMA, Masatou; MATSUSHIMA, Ken; WANIBUCHI, Masahiko

2015-01-01

Research in microneurosurgical anatomy has contributed to great advances in neurosurgery in the last 40 years. Many Japanese neurosurgeons have traveled abroad to study microsurgical anatomy and played major roles in advancing and spreading the knowledge of anatomy, overcoming their disadvantage that the cadaver study has been strictly limited inside Japan. In Japan, they initiated an educational system for surgical anatomy that has contributed to the development and standardization of Japanese neurosurgery. For example, the Japanese Society for Microsurgical Anatomy started an annual educational meeting in the middle of 1980s and published its proceedings in Japanese every year for approximately 20 years. These are some of the achievements that bring worldwide credit to Japanese neurosurgeons. Not only should Japanese neurosurgeons improve their educational system but they should also contribute to the international education in this field, particularly in Asia. PMID:25797782

Issei: Japanese Immigrants in Hawaii.

ERIC Educational Resources Information Center

Kimura, Yukiko

Coming to Hawaii before July 1, 1924, when the Japanese Exclusion Act became effective, the experiences of the Issei or first generation are described. Divided into four parts, this book examines the experiences of Japanese immigrants in Hawaii from 1885 through 1970. Part 1, "The Formation and Stabilization of the Issei Community,"…

Pair-List Readings in Korean-Japanese, Chinese-Japanese and English-Japanese Interlanguage

ERIC Educational Resources Information Center

Marsden, Heather

2008-01-01

In English and Chinese, questions with a "wh"-object and a universally quantified subject (e.g. "What did everyone buy?") allow an individual answer ("Everyone bought apples.") and a pair-list answer ("Sam bought apples, Jo bought bananas, Sally bought..."). By contrast, the pair-list answer is reportedly unavailable in Japanese and Korean. This…

The scientific prototype, the only reasonable next step for the American MFE program; or why FESAC will never solicit my advice again

NASA Astrophysics Data System (ADS)

Manheimer, Wallace

2014-10-01

The scientific prototype is a tokamak which builds on what has been accomplished in TFTR, JET and JT-60. Instead of attempting to advance the plasma parameters, or investigate a new confinement configuration, it takes the tokamak plasma parameters already achieved (or actually nearly already achieved), Q about 1 and run it at steady state or high duty cycle in a DT plasma. It is very much a nuclear device requiring all of the safeguards of any nuclear device. It is an important step forward for either pure fusion or fusion breeding, and it is difficult to see how fusion can advance very far with out the knowledge the scientific prototype would provide. The poster will be divided into two parts. The first part examines options other than the scientific prototype and shows why they should be rejected. The second part explains the scientific prototype in somewhat more detail.

Identification of Cha o 3 homolog Cry j 4 from Cryptomeria japonica (Japanese cedar) pollen: Limitation of the present Japanese cedar-specific ASIT.

PubMed

Osada, Toshihiro; Tanaka, Yuki; Yamada, Akira; Sasaki, Eiji; Utsugi, Teruhiro

2018-03-07

About one-third of the Japanese population suffers from Japanese cedar pollinosis, which is frequently accompanied by Japanese cypress pollinosis. Recently, a novel major Japanese cypress pollen allergen, Cha o 3, was discovered. However, whether a Cha o 3 homolog is present in Japanese cedar pollen remains to be determined. Western blot analysis was performed using Cha o 3-specific antiserum. In addition, cloning of the gene encoding Cry j 4 was conducted using total cDNA from the male flower of Japanese cedar trees. Allergen potency and cross-reactivity were investigated using a T-cell proliferation assay, basophil activation test, and ImmunoCAP inhibition assay. A low amount of Cha o 3 homolog protein was detected in Japanese cedar pollen extract. The deduced amino acid sequence of Cry j 4 showed 84% identity to that of Cha o 3. Cross-reactivity between Cry j 4 and Cha o 3 was observed at the T cell and IgE levels. Cry j 4 was discovered as a counterpart allergen of Cha o 3 in Japanese cedar pollen, with a relationship similar to that between Cry j 1-Cha o 1 and Cry j 2-Cha o 2. Our findings also suggest that allergen-specific immunotherapy (ASIT) using Japanese cedar pollen extract does not induce adequate immune tolerance to Cha o 3 due to the low amount of Cry j 4 in Japanese cedar pollen. Therefore, ASIT using Cha o 3 or cypress pollen extract coupled with Japanese cedar pollen extract is required in order to optimally control allergy symptoms during Japanese cypress pollen season. Copyright © 2018 Japanese Society of Allergology. Production and hosting by Elsevier B.V. All rights reserved.

Rapid prototyping of microbial cell factories via genome-scale engineering.

PubMed

Si, Tong; Xiao, Han; Zhao, Huimin

2015-11-15

Advances in reading, writing and editing genetic materials have greatly expanded our ability to reprogram biological systems at the resolution of a single nucleotide and on the scale of a whole genome. Such capacity has greatly accelerated the cycles of design, build and test to engineer microbes for efficient synthesis of fuels, chemicals and drugs. In this review, we summarize the emerging technologies that have been applied, or are potentially useful for genome-scale engineering in microbial systems. We will focus on the development of high-throughput methodologies, which may accelerate the prototyping of microbial cell factories. Copyright © 2014 Elsevier Inc. All rights reserved.

Japanese Guideline for Atopic Dermatitis 2014.

PubMed

Katayama, Ichiro; Kohno, Yoichi; Akiyama, Kazuo; Aihara, Michiko; Kondo, Naomi; Saeki, Hidehisa; Shoji, Shunsuke; Yamada, Hidekazu; Nakamura, Koichiro

2014-09-01

Given the importance of appropriate diagnosis and appropriate assessment of cutaneous symptoms in treatment of atopic dermatitis, the basics of treatment in this guideline are composed of (1) investigation and countermeasures of causes and exacerbating factors, (2) correction of skin dysfunctions (skin care), and (3) pharmacotherapy, as three mainstays. These are based on the disease concept that atopic dermatitis is a inflammatory cutaneous disease with eczema by atopic diathesis, multi-factorial in onset and aggravation, and accompanied by skin dysfunctions. These three points are equally important and should be appropriately combined in accordance with the symptoms of each patient. In treatment, it is important to transmit the etiological, pathological, physiological, or therapeutic information to the patient to build a favorable partnership with the patient or his/her family so that they may fully understand the treatment. This guideline discusses chiefly the basic therapy in relation to the treatment of this disease. The goal of treatment is to enable patients to lead an uninterrupted social life and to control their cutaneous symptoms so that their quality of life (QOL) may meet a satisfactory level. The basics of treatment discussed in this guideline are based on the "Guidelines for the Treatment of Atopic Dermatitis 2008" prepared by the Health and Labour Sciences Research and the "Guidelines for the Management of Atopic Dermatitis 2012 (ADGL2012)" prepared by the Atopic Dermatitis Guidelines Advisory Committee, Japanese Society of Allergology in principle. The guidelines for the treatment of atopic dermatitis are summarized in the "Japanese Guideline for the Diagnosis and Treatment of Allergic Disease 2013" together with those for other allergic diseases.

Classroom to Clinic: Merging Education and Research to Efficiently Prototype Medical Devices

PubMed Central

Begg, Nikolai D.; Walsh, Conor; Custer, David; Gupta, Rajiv; Osborn, Lynn R.; Slocum, Alexander H.

2013-01-01

Innovation in patient care requires both clinical and technical skills, and this paper presents the methods and outcomes of a nine-year, clinical-academic collaboration to develop and evaluate new medical device technologies, while teaching mechanical engineering. Together, over the course of a single semester, seniors, graduate students, and clinicians conceive, design, build, and test proof-of-concept prototypes. Projects initiated in the course have generated intellectual property and peer-reviewed publications, stimulated further research, furthered student and clinician careers, and resulted in technology licenses and start-up ventures. PMID:27170859

Classroom to Clinic: Merging Education and Research to Efficiently Prototype Medical Devices.

PubMed

Hanumara, Nevan C; Begg, Nikolai D; Walsh, Conor; Custer, David; Gupta, Rajiv; Osborn, Lynn R; Slocum, Alexander H

2013-01-01

Innovation in patient care requires both clinical and technical skills, and this paper presents the methods and outcomes of a nine-year, clinical-academic collaboration to develop and evaluate new medical device technologies, while teaching mechanical engineering. Together, over the course of a single semester, seniors, graduate students, and clinicians conceive, design, build, and test proof-of-concept prototypes. Projects initiated in the course have generated intellectual property and peer-reviewed publications, stimulated further research, furthered student and clinician careers, and resulted in technology licenses and start-up ventures.

Marine Biodiversity in Japanese Waters

PubMed Central

Fujikura, Katsunori; Lindsay, Dhugal; Kitazato, Hiroshi; Nishida, Shuhei; Shirayama, Yoshihisa

2010-01-01

To understand marine biodiversity in Japanese waters, we have compiled information on the marine biota in Japanese waters, including the number of described species (species richness), the history of marine biology research in Japan, the state of knowledge, the number of endemic species, the number of identified but undescribed species, the number of known introduced species, and the number of taxonomic experts and identification guides, with consideration of the general ocean environmental background, such as the physical and geological settings. A total of 33,629 species have been reported to occur in Japanese waters. The state of knowledge was extremely variable, with taxa containing many inconspicuous, smaller species tending to be less well known. The total number of identified but undescribed species was at least 121,913. The total number of described species combined with the number of identified but undescribed species reached 155,542. This is the best estimate of the total number of species in Japanese waters and indicates that more than 70% of Japan's marine biodiversity remains un-described. The number of species reported as introduced into Japanese waters was 39. This is the first attempt to estimate species richness for all marine species in Japanese waters. Although its marine biota can be considered relatively well known, at least within the Asian-Pacific region, considering the vast number of different marine environments such as coral reefs, ocean trenches, ice-bound waters, methane seeps, and hydrothermal vents, much work remains to be done. We expect global change to have a tremendous impact on marine biodiversity and ecosystems. Japan is in a particularly suitable geographic situation and has a lot of facilities for conducting marine science research. Japan has an important responsibility to contribute to our understanding of life in the oceans. PMID:20689840

Developmental Sentence Scoring for Japanese

ERIC Educational Resources Information Center

Miyata, Susanne; MacWhinney, Brian; Otomo, Kiyoshi; Sirai, Hidetosi; Oshima-Takane, Yuriko; Hirakawa, Makiko; Shirai, Yasuhiro; Sugiura, Masatoshi; Itoh, Keiko

2013-01-01

This article reports on the development and use of the Developmental Sentence Scoring for Japanese (DSSJ), a new morpho-syntactical measure for Japanese constructed after the model of Lee's English Developmental Sentence Scoring model. Using this measure, the authors calculated DSSJ scores for 84 children divided into six age groups between 2;8…

Building a Web-based drug ordering system for hospitals: from requirements engineering to prototyping.

PubMed

Hübner, U; Klein, F; Hofstetter, J; Kammeyer, G; Seete, H

2000-01-01

Web-based drug ordering allows a growing number of hospitals without pharmacy to communicate seamlessly with their external pharmacy. Business process analysis and object oriented modelling performed together with the users at a pilot hospital resulted in a comprehensive picture of the user and business requirements for electronic drug ordering. The user requirements were further validated with the help of a software prototype. In order to capture the needs of a large number of users CAP10, a new method making use of pre-built models, is proposed. Solutions for coping with the technical requirements (interfacing the business software at the pharmacy) and with the legal requirements (signing the orders) are presented.

EUSO-TA prototype telescope

NASA Astrophysics Data System (ADS)

Bisconti, Francesca; JEM-EUSO Collaboration

2016-07-01

EUSO-TA is one of the prototypes developed for the JEM-EUSO project, a space-based large field-of-view telescope to observe the fluorescence light emitted by cosmic ray air showers in the atmosphere. EUSO-TA is a ground-based prototype located at the Telescope Array (TA) site in Utah, USA, where an Electron Light Source and a Central Laser Facility are installed. The purpose of the EUSO-TA project is to calibrate the prototype with the TA fluorescence detector in presence of well-known light sources and cosmic ray air showers. In 2015, the detector started the first measurements and tests using the mentioned light sources have been performed successfully. A first cosmic ray candidate has been observed, as well as stars of different magnitude and color index. Since Silicon Photo-Multipliers (SiPMs) are very promising for fluorescence telescopes of next generation, they are under consideration for the realization of a new prototype of EUSO Photo Detector Module (PDM). The response of this sensor type is under investigation through simulations and laboratory experimentation.

Seasonal allergic conjunctivitis induced by Japanese pear pollen.

PubMed

Yanagisawa, S; Nagaki, Y; Hiraki, S; Kadoi, C; Hayasaka, S; Teranishi, H

1999-01-01

To evaluate the ocular findings in patients with Japanese pear (Pyrus pyrifolia Nakai) pollinosis. Twenty-two farmers working on artificial pollination in Japanese pear orchards were examined for ocular itching, conjunctival conditions, presence of eosinophils in the conjunctival specimen, and nasal symptoms. Serum IgE antibody to Japanese pear pollen was determined in 16 farmers. Of the 22 subjects, 3 (Nos. 3, 4, and 13) exhibited ocular itching, conjunctival hyperemia, eosinophils in the conjunctival specimen, and positive serum IgE antibodies to Japanese pear pollen. In these patients, the conjunctivitis disappeared after treatment with topical cromoglycate. The present study demonstrated that seasonal allergic conjunctivitis may be induced by Japanese pear pollen (entomophilous flower pollen).

Experimental induction of necrotic enteritis in chickens by a netB-positive Japanese isolate of Clostridium perfringens.

PubMed

To, Ho; Suzuki, Takayuki; Kawahara, Fumiya; Uetsuka, Koji; Nagai, Shinya; Nunoya, Tetsuo

2017-02-28

Necrotic enteritis (NE) is one of the most important bacterial diseases in terms of economic losses. Clostridium perfringens necrotic enteritis toxin B, NetB, was recently proposed as a new key virulent factor for the development of NE. The goal of this work was to develop a necrotic enteritis model in chickens by using a Japanese isolate of C. perfringens. The Japanese isolate has been found to contain netB gene, which had the same nucleotide and deduced amino acid sequences as those of prototype gene characterized in Australian strain EHE-NE18, and also expressed in vitro a 33-kDa protein identified as NetB toxin by nano-scale liquid chromatographic tandem mass spectrometry. In the challenge experiment, broiler chickens fed a commercial chicken starter diet for 14 days post-hatch were changed to a high protein feed mixed 50:50 with fishmeal for 6 days. At day 21 of age, feed was withheld for 24 hr, and each chicken was orally challenged twice daily with 2 ml each of C. perfringens culture (10 9 to 10 10 CFU) on 5 consecutive days. The gross necrotic lesions were observed in 90 and 12.5% of challenged and control chickens, respectively. To our knowledge, this is the first study that demonstrated that a netB-positive Japanese isolate of C. perfringens is able to induce the clinical signs and lesions characteristic of NE in the experimental model, which may be useful for evaluating the pathogenicity of field isolates, the efficacy of a vaccine or a specific drug against NE.

Acquisition of Japanese contracted sounds in L1 phonology

NASA Astrophysics Data System (ADS)

Tsurutani, Chiharu

2002-05-01

Japanese possesses a group of palatalized consonants, known to Japanese scholars as the contracted sounds, [CjV]. English learners of Japanese appear to treat them initially as consonant + glide clusters, where there is an equivalent [Cj] cluster in English, or otherwise tend to insert an epenthetic vowel [CVjV]. The acquisition of the Japanese contracted sounds by first language (L1) learners has not been widely studied compared with the consonant clusters in English with which they bear a close phonetic resemblance but have quite a different phonological status. This is a study to investigate the L1 acquisition process of the Japanese contracted sounds (a) in order to observe how the palatalization gesture is acquired in Japanese and (b) to investigate differences in the sound acquisition processes of first and second language (L2) learners: Japanese children compared with English learners. To do this, the productions of Japanese children ranging in age from 2.5 to 3.5 years were transcribed and the pattern of misproduction was observed.

Adherence to the food-based Japanese dietary guidelines in relation to metabolic risk factors in young Japanese women.

PubMed

Nishimura, Terumi; Murakami, Kentaro; Livingstone, M Barbara E; Sasaki, Satoshi; Uenishi, Kazuhiro

2015-08-28

While Japanese diets have attracted considerable attention because of, for example, the long-life expectancy in Japan, their health benefits have not been examined. In the present study, we cross-sectionally examined whether adherence to the food-based Japanese dietary guidelines is associated with metabolic risk factors in 1083 Japanese women aged 18-22 years. Based on the Japanese Food Guide Spinning Top, adherence to the food-based Japanese dietary guidelines was assessed using dietary information on consumed servings of grain dishes, vegetable dishes, fish and meat dishes, milk and fruits and energy from snacks and alcoholic beverages during the preceding month, which was derived from a comprehensive diet history questionnaire. Higher dietary adherence was associated with higher intakes of protein, carbohydrate, dietary fibre, Na, K and vitamin C, and lower intakes of total and saturated fat. There was also an inverse association between dietary adherence and dietary energy density. After adjustment for potential confounding factors, dietary adherence was inversely associated with waist circumference (P for trend = 0·002). It also showed an inverse association with LDL-cholesterol concentrations (P for trend = 0·04). There was no association with the other metabolic risk factors examined, including BMI, systolic and diastolic blood pressure, total and HDL-cholesterol, TAG, glucose, glycated Hb and insulin concentrations. In conclusion, higher adherence to the food-based Japanese dietary guidelines, which was characterised by favourable dietary intakes of foods and nutrients as well as lower energy density, was associated with lower waist circumference and LDL-cholesterol concentrations in this group of young Japanese women.

A Comparison of Maternal Care and Infant Behavior in Japanese-American, American, and Japanese Families.

ERIC Educational Resources Information Center

Caudill, William; Frost, Lois

Previous studies have shown that American mothers, in contrast to Japanese, do more lively chatting to their babies, and that as a result, the American babies have a generally higher level of vocalization and, particularly, they respond with greater amounts of happy vocalization and gross motor activity than do Japanese babies. Thus, it appears…

Generational Differences in Japanese Attitudes toward Women's Employment.

ERIC Educational Resources Information Center

Engel, John W.

Traditional ideals discourage Japanese women from working outside the home. This study was conducted to explore generational differences in Japanese attitudes toward women's employment and to interpret those differences in terms of social change. Questionnaires were distributed to approximately 900 Japanese men and women. Subjects were classified…

Performance of the PHENIX NCC Prototype

DOE Office of Scientific and Technical Information (OSTI.GOV)

O'Brien, E.; Kistenev, E.; Li, Z.

2006-10-27

The first prototype of NCC Si-W electromagnetic calorimeter have been built and tested at U-70 accelerator (IHEP, Protvino). Tests have been performed for 10 GeV electrons and 70 GeV protons.This paper describes design and construction of the prototype and tests results. Final prototype energy resolution is about 11% at 90% CL.

Starshade Prototype

NASA Image and Video Library

2016-08-09

This image shows the bare bones of the first prototype starshade by NASA's Jet Propulsion Laboratory, Pasadena, California. The prototype was shown in technology partner Astro Aerospace/Northrup Grumman's facility in Santa Barbara, California in 2013. In order for the petals of the starshade to diffract starlight away from the camera of a space telescope, they must be deployed with accuracy once the starshade reaches space. The four petals pictured in the image are being measured for this positional accuracy with a laser. As shown by this 66-foot (20-meter) model, starshades can come in many shapes and sizes. This design shows petals that are more extreme in shape which properly diffracts starlight for smaller telescopes. http://photojournal.jpl.nasa.gov/catalog/PIA20903

Planning and Prototyping for a Storage Ring Measurement of the Proton Electric Dipole Moment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Talman, Richard

2015-07-01

Electron and proton EDM's can be measured in "frozen spin" (with the beam polarization always parallel to the orbit, for example) storage rings. For electrons the "magic" kinetic energy at which the beam can be frozen is 14.5 MeV. For protons the magic kinetic energy is 230 MeV. The currently measured upper limit for the electron EDM is much smaller than the proton EDM upper limit, which is very poorly known. Nevertheless, because the storage ring will be an order of magnitude cheaper, a sensible plan is to first build an all-electric electron storage ring as a prototype. Such anmore » electron ring was successfully built at Brookhaven, in 1954, as a prototype for their AGS ring. This leaves little uncertainty concerning the cost and performance of such a ring. (This is documentedin one of the Physical Review papers mentioned above.)« less

Development of a neutronics calculation method for designing commercial type Japanese sodium-cooled fast reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Takeda, T.; Shimazu, Y.; Hibi, K.

2012-07-01

Under the R and D project to improve the modeling accuracy for the design of fast breeder reactors the authors are developing a neutronics calculation method for designing a large commercial type sodium- cooled fast reactor. The calculation method is established by taking into account the special features of the reactor such as the use of annular fuel pellet, inner duct tube in large fuel assemblies, large core. The Verification and Validation, and Uncertainty Qualification (V and V and UQ) of the calculation method is being performed by using measured data from the prototype FBR Monju. The results of thismore » project will be used in the design and analysis of the commercial type demonstration FBR, known as the Japanese Sodium fast Reactor (JSFR). (authors)« less

Japanese International Business Communication: The Place of English.

ERIC Educational Resources Information Center

Hilton, Chadwick B.

1992-01-01

Examines the use of English in Japanese business communication. Finds that English is an important element of Japanese international business policy and that an awareness of both Japanese corporate commitment to employee English proficiency and of the complexities of the use of English for special purposes benefits business communicators involved…

Evaluation of Structural Robustness against Column Loss: Methodology and Application to RC Frame Buildings.

PubMed

Bao, Yihai; Main, Joseph A; Noh, Sam-Young

2017-08-01

A computational methodology is presented for evaluating structural robustness against column loss. The methodology is illustrated through application to reinforced concrete (RC) frame buildings, using a reduced-order modeling approach for three-dimensional RC framing systems that includes the floor slabs. Comparisons with high-fidelity finite-element model results are presented to verify the approach. Pushdown analyses of prototype buildings under column loss scenarios are performed using the reduced-order modeling approach, and an energy-based procedure is employed to account for the dynamic effects associated with sudden column loss. Results obtained using the energy-based approach are found to be in good agreement with results from direct dynamic analysis of sudden column loss. A metric for structural robustness is proposed, calculated by normalizing the ultimate capacities of the structural system under sudden column loss by the applicable service-level gravity loading and by evaluating the minimum value of this normalized ultimate capacity over all column removal scenarios. The procedure is applied to two prototype 10-story RC buildings, one employing intermediate moment frames (IMFs) and the other employing special moment frames (SMFs). The SMF building, with its more stringent seismic design and detailing, is found to have greater robustness.

Evaluation of Structural Robustness against Column Loss: Methodology and Application to RC Frame Buildings

PubMed Central

Bao, Yihai; Main, Joseph A.; Noh, Sam-Young

2017-01-01

A computational methodology is presented for evaluating structural robustness against column loss. The methodology is illustrated through application to reinforced concrete (RC) frame buildings, using a reduced-order modeling approach for three-dimensional RC framing systems that includes the floor slabs. Comparisons with high-fidelity finite-element model results are presented to verify the approach. Pushdown analyses of prototype buildings under column loss scenarios are performed using the reduced-order modeling approach, and an energy-based procedure is employed to account for the dynamic effects associated with sudden column loss. Results obtained using the energy-based approach are found to be in good agreement with results from direct dynamic analysis of sudden column loss. A metric for structural robustness is proposed, calculated by normalizing the ultimate capacities of the structural system under sudden column loss by the applicable service-level gravity loading and by evaluating the minimum value of this normalized ultimate capacity over all column removal scenarios. The procedure is applied to two prototype 10-story RC buildings, one employing intermediate moment frames (IMFs) and the other employing special moment frames (SMFs). The SMF building, with its more stringent seismic design and detailing, is found to have greater robustness. PMID:28890599

Japanese Flagship Universities at a Crossroads

ERIC Educational Resources Information Center

Yonezawa, Akiyoshi

2007-01-01

The increasing pace and scope of global structural change has left Japanese flagship universities at a crossroads. Reflecting upon historical trends, current policy changes and respective institutional strategies for global marketing among Japanese top research universities, the author discusses possible future directions for these institutions…

Prompt and Precise Prototyping

NASA Technical Reports Server (NTRS)

2003-01-01

For Sanders Design International, Inc., of Wilton, New Hampshire, every passing second between the concept and realization of a product is essential to succeed in the rapid prototyping industry where amongst heavy competition, faster time-to-market means more business. To separate itself from its rivals, Sanders Design aligned with NASA's Marshall Space Flight Center to develop what it considers to be the most accurate rapid prototyping machine for fabrication of extremely precise tooling prototypes. The company's Rapid ToolMaker System has revolutionized production of high quality, small-to-medium sized prototype patterns and tooling molds with an exactness that surpasses that of computer numerically-controlled (CNC) machining devices. Created with funding and support from Marshall under a Small Business Innovation Research (SBIR) contract, the Rapid ToolMaker is a dual-use technology with applications in both commercial and military aerospace fields. The advanced technology provides cost savings in the design and manufacturing of automotive, electronic, and medical parts, as well as in other areas of consumer interest, such as jewelry and toys. For aerospace applications, the Rapid ToolMaker enables fabrication of high-quality turbine and compressor blades for jet engines on unmanned air vehicles, aircraft, and missiles.

Roles of Extension Officers to Promote Social Capital in Japanese Agricultural Communities

PubMed Central

Takemura, Kosuke; Uchida, Yukiko; Yoshikawa, Sakiko

2014-01-01

Social capital has been found to be correlated with community welfare, but it is not easy to build and maintain it. The purpose of the current study is to investigate the role of professional coordinators of social relationships to create and maintain social capital in a community. We focused on extension officers in Japanese agricultural communities, who help farmers in both technical and social matters. A large nation-wide survey of extension officers as well as two supplementary surveys were conducted. We found that (1) social capital-related activities (e.g., assistance for building organizations among farmers) were particularly effective for solving problems; (2) social capital (trust relationships) among community residents increased their life quality; (3) social capital in local communities was correlated with extension officers' own communication skills and harmonious relationships among their colleagues. In sum, social capital in local communities is maintained by coordinators with professional social skills. PMID:24642575

Hotel Employees' Japanese Language Experiences: Implications and Suggestions.

ERIC Educational Resources Information Center

Makita-Discekici, Yasuko

1998-01-01

Analyzes the Japanese language learning experiences of 13 hotel employees in Guam. Results of the study present implications and suggestions for a Japanese language program for the hotel industry. The project began as a result of hotel employees frustrations when they were unable to communicate effectively with their Japanese guests. (Auth/JL)

Differences in nutrient intakes and physical activity levels of Japanese and Australian Caucasian males living in Australia and Japanese males living in Japan.

PubMed

Kagawa, Masaharu; Saito, Yoko; Kerr, Deborah; Uchida, Hayato; Binns, Colin W

2006-01-01

The aim of the study was to determine the nutritional status and nutrient intakes of young Japanese males living in Australia and compared with Japanese males living in Japan and Australian Caucasian males. Four-day dietary records were obtained from 65 Japanese living in Australia (JA), 81 Japanese living in Japan (JJ), and 70 Australian Caucasian males (AA) aged 18-30 years old, together with body composition and physical activity level assessments using anthropometry and the questionnaire. Australian males were significantly taller and heavier than the Japanese counterparts and also showed a greater percent body fat (%BF) and height-corrected sum of skinfolds compared with Japanese males living in Japan (%BF: JJ = 16.6 +/- 5.2, AA = 18.7 +/- 5.6; height corrected sum of skinfolds: JJ = 78.8 +/- 37.3, AA = 96.0 +/- 39.5) (P<0.05). A greater proportion of Australian Caucasian males (98.6%) were involved in vigorous physical exercise than Japanese males (JA = 72.3%; JJ = 85.2%). The JA group consumed a greater amount of energy from protein and fat sources as well as greater calcium, iron, dietary fibre and niacin equivalents intakes than the JJ group (P<0.05). The results suggest that Japanese males living in Australia consumed more energy-dense westernised diet than Japanese males living in Japan. Because of lower physical activity level than Australian males, consumption of energy-dense diet may increase the risk of weight gain among Japanese males who stay in Australia for a long-term.

The Sound Pattern of Japanese Surnames

ERIC Educational Resources Information Center

Tanaka, Yu

2017-01-01

Compound surnames in Japanese show complex phonological patterns, which pose challenges to current theories of phonology. This dissertation proposes an account of the segmental and prosodic issues in Japanese surnames and discusses their theoretical implications. Like regular compound words, compound surnames may undergo a sound alternation known…

Japanese Children's Understanding of Notational Systems

ERIC Educational Resources Information Center

Takahashi, Noboru

2012-01-01

This study examined Japanese children's understanding of two Japanese notational systems: "hiragana" and "kanji". In three experiments, 126 3- to 6-year-olds were asked to name words written in hiragana or kanji as they appeared with different pictures. Consistent with Bialystok ("Journal of Experimental Child…

A cell-free framework for rapid biosynthetic pathway prototyping and enzyme discovery.

PubMed

Karim, Ashty S; Jewett, Michael C

2016-07-01

Speeding up design-build-test (DBT) cycles is a fundamental challenge facing biochemical engineering. To address this challenge, we report a new cell-free protein synthesis driven metabolic engineering (CFPS-ME) framework for rapid biosynthetic pathway prototyping. In our framework, cell-free cocktails for synthesizing target small molecules are assembled in a mix-and-match fashion from crude cell lysates either containing selectively enriched pathway enzymes from heterologous overexpression or directly producing pathway enzymes in lysates by CFPS. As a model, we apply our approach to n-butanol biosynthesis showing that Escherichia coli lysates support a highly active 17-step CoA-dependent n-butanol pathway in vitro. The elevated degree of flexibility in the cell-free environment allows us to manipulate physiochemical conditions, access enzymatic nodes, discover new enzymes, and prototype enzyme sets with linear DNA templates to study pathway performance. We anticipate that CFPS-ME will facilitate efforts to define, manipulate, and understand metabolic pathways for accelerated DBT cycles without the need to reengineer organisms. Copyright © 2016 International Metabolic Engineering Society. Published by Elsevier Inc. All rights reserved.

NRCS Prototype Programmatic Agreement FAQ

Science.gov Websites

Search Frequently Asked Questions regarding the Natural Resources Conservation Service Prototype Programmatic Agreement The Advisory Council on Historic Preservation (ACHP) recently designated a prototype programmatic agreement (PPA) for the United States Department of Agriculture, Natural Resources Conservation

Japanese Experiment Module arrival

NASA Image and Video Library

2007-03-29

Several components for delivery to the International Space Station sit in test stands inside the Space Station Processing Facility highbay. To the right, from back to front, are the Japanese Experiment Module, the Raffaello multi-purpose logistics module, and the European Space Agency's Columbus scientific research module. To the left in front is the starboard truss segment S5. Behind it is the test stand that will hold the Experiment Logistics Module Pressurized Section for the Japanese Experiment Module. The logistics module is one of the components of the Japanese Experiment Module or JEM, also known as Kibo, which means "hope" in Japanese. Kibo comprises six components: two research facilities -- the Pressurized Module and Exposed Facility; a Logistics Module attached to each of them; a Remote Manipulator System; and an Inter-Orbit Communication System unit. Kibo also has a scientific airlock through which experiments are transferred and exposed to the external environment of space. Kibo is Japan's first human space facility and its primary contribution to the station. Kibo will enhance the unique research capabilities of the orbiting complex by providing an additional environment in which astronauts can conduct science experiments. The various components of JEM will be assembled in space over the course of three Space Shuttle missions. The first of those three missions, STS-123, will carry the Experiment Logistics Module Pressurized Section aboard the Space Shuttle Endeavour, targeted for launch in 2007.

Data on cost-optimal Nearly Zero Energy Buildings (NZEBs) across Europe.

PubMed

D'Agostino, Delia; Parker, Danny

2018-04-01

This data article refers to the research paper A model for the cost-optimal design of Nearly Zero Energy Buildings (NZEBs) in representative climates across Europe [1]. The reported data deal with the design optimization of a residential building prototype located in representative European locations. The study focus on the research of cost-optimal choices and efficiency measures in new buildings depending on the climate. The data linked within this article relate to the modelled building energy consumption, renewable production, potential energy savings, and costs. Data allow to visualize energy consumption before and after the optimization, selected efficiency measures, costs and renewable production. The reduction of electricity and natural gas consumption towards the NZEB target can be visualized together with incremental and cumulative costs in each location. Further data is available about building geometry, costs, CO 2 emissions, envelope, materials, lighting, appliances and systems.

Northwest Energy Efficient Manufactured Housing Program: High Performance Manufactured Home Prototyping and Construction Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hewes, Tom; Peeks, Brady

2013-11-01

The Building America Partnership for Improved Residential Construction, the Bonneville Power Administration (BPA), and Northwest Energy Works (NEW), the current Northwest Energy Efficient Manufactured Housing Program (NEEM) administrator, have been collaborating to conduct research on new specifications that would improve on the energy requirements of a NEEM home. In its role as administrator, NEW administers the technical specs, performs research and engineering analysis, implements ongoing construction quality management procedures, and maintains a central database with home tracking. This project prototyped and assessed the performances of cost-effective high performance building assemblies and mechanical systems that are not commonly deployed in themore » manufacturing setting. The package of measures is able to reduce energy used for space conditioning, water heating and lighting by 50% over typical manufactured homes produced in the northwest.« less

IMMR Phase 1 Prototyping Plan Inputs

NASA Technical Reports Server (NTRS)

Vowell, C. W.; Johnson-Throop, Kathy; Smith, Bryon; Darcy, Jeannette

2006-01-01

This viewgraph presentation reviews the phase I plan of the prototype of the IMMR by the Multilateral Medical Operations Panel (MMOP) Medical Informatics & Technology (MIT) Working Group. It reviews the Purpose of IMMR Prototype Phase 1 (IPP1); the IPP1 Plan Overview, the IMMR Prototype Phase 1 Plan for PDDs and MIC and MIC-DDs, Plan for MICs, a nd the IPP1 objectives

Transforming Ordinary Buildings into Smart Buildings via Low-Cost, Self-Powering Wireless Sensors & Sensor Networks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feng, Philip

The research objective of this project is to design and demonstrate a low-cost, compact, easy-to-deploy, maintenance-free sensor node technology, and a network of such sensors, which enable the monitoring of multiphysical parameters and can transform today’s ordinary buildings into smart buildings with environmental awareness. We develop the sensor node and network via engineering and integration of existing technologies, including high-efficiency mechanical energy harvesting, and ultralow-power integrated circuits (ICs) for sensing and wireless communication. Through integration and innovative power management via specifically designed low-power control circuits for wireless sensing applications, and tailoring energy-harvesting components to indoor applications, the target products willmore » have smaller volume, higher efficiency, and much lower cost (in both manufacturing and maintenance) than the baseline technology. Our development and commercialization objective is to create prototypes for our target products under the CWRU-Intwine collaboration.« less

Ethnic difference in liver fat content: a cross-sectional observation among Japanese American in Hawaii, Japanese in Japan, and non-Hispanic whites in United States.

PubMed

Azuma, Koichiro; Curb, J David; Kadowaki, Takashi; Edmundowicz, Daniel; Kadowaki, Sayaka; Masaki, Kamal H; El-Saed, Aiman; Nishio, Yoshihiko; Seto, Todd B; Okamura, Tomonori; Cetinel, Cemal; Kadota, Aya; Sutton-Tyrrell, Kim; Miura, Katsuyuki; Evans, Rhobert W; Takamiya, Tomoko; Maegawa, Hiroshi; Miljkovic, Iva; Kuller, Lewis H; Ueshima, Hirotsugu; Kelley, David E; Sekikawa, Akira

2013-01-01

We recently reported that Japanese had higher liver fat at a lower level of BMI compared with non-Hispanic whites (NHW). We hypothesize that ethnic difference in fat storage capacity contributes to this ethnic difference in liver fat. To examine this, we assessed liver fat among 244 Japanese-American aged 40-49, using regional computed-tomography images, along with metabolic variables. Despite the similar BMI between Japanese-Americans and NHW men, Japanese-Americans had more liver fat (liver to spleen attenuation ratio: 1.03 ± 0.22 for Japanese-Americans, and 1.07 ± 0.15 for NHW men; p < 0.05) and tended to have a greater disposition for fatty liver with an increase in BMI than NHW, indicating a clear difference between the two groups. In addition, liver fat is less in Japanese-Americans compared with Japanese men (1.03 ± 0.22 vs. 1.01 ± 0.16; p < 0.05), despite of a much higher BMI. These ethnic differences support the hypothesis that higher fat storage capacity indeed seems to be associated with less liver fat. In all the groups, liver fat content strongly correlated with triglycerides, homeostasis model assessment-insulin resistance, and C-reactive protein (CRP). Nevertheless, these metabolic variables were worse in Japanese-Americans, despite of less liver fat, compared with Japanese. Moreover, CRP levels were least among Japanese with highest liver fat, and highest among NHW men with least liver fat, despite of a strong positive association between CRP and fatty liver within each population. Fat content in the liver is intermediate for Japanese-Americans compared with Japanese and NHW men, which supports the hypothesis of less fat storage capacity among Japanese, closely linked to ethnic difference in predisposition to fatty liver. © 2011 Asian Oceanian Association for the Study of Obesity. Published by Elsevier Ltd. All rights reserved.

Japanese experiment module (JEM)

NASA Technical Reports Server (NTRS)

Kato, T.

1986-01-01

Japanese hardware elements studied during the definition phase of phase B are described. The hardware is called JEM (Japanese Experiment Module) and will be attached to the Space Station core. JEM consists of a pressurized module, an exposed facility, a scientific/equipment airlock, a local remote manipulator, and experimental logistic module. With all those hardware elements JEM will accommodate general scientific and technology development research (some of the elements are to utilize the advantage of the microgravity environment), and also accommodate control panels for the Space Station Mobile Remote Manipulator System and attached payloads.

Anthropometric differences in preschool children of Japanese ancestry in Lima, Peru.

PubMed

Shimabuku, Roberto; Teruya, Alberto; Nakachi, Graciela

2009-08-01

Ethnic differences in the pattern and trend of growth and weight have been described in studies of migrant populations. Our objective was to compare anthropometric parameters and overweight prevalence in third and fourth generation Japanese descendant preschoolers within the Peruvian preschool population. A total of 337 measurements of height and weight from 284 children, three to five years of age, were taken over three years in one Japanese-Peruvian preschool center in Lima, Peru. The data of each parameter were classified into three ethnic groups according to their parents' surnames: Japanese descendant children (n = 104), with both parents with Japanese surnames; Japanese-Peruvian descendant (n = 93), one parent with a Japanese surname and one with a non-Japanese surname; and Peruvian descendant (n = 140), both parents with non-Japanese surnames. We used the National Center for Health Statistics (NCHS) 2000 growth charts as reference values to obtain centiles, Z scores, and body mass index (BMI). In boys, the three groups differed significantly in height, weight, BMI, Z scores, and overweight prevalence. Peruvian descendant boys were taller and heavier than Japanese-Peruvian and Japanese descendants. Moreover, Japanese-Peruvian descendant boys were taller and heavier than Japanese descendant boys. In girls, there were no significant differences in height and weight and in overweight prevalence among the three ethnic groups. Japanese descendants in Peru have height, weight and BMI values similar to those of Japanese children in Japan but lesser than Peruvian children. These findings may be related to differences in ethnic background.

Study on Japanese Cornmint in Mississippi

USDA-ARS?s Scientific Manuscript database

Japanese cornmint (Mentha canadensis L.) is a subtropical essential oil crop grown in Asia and South America. The essential oil of Japanese cornmint is the source for production of crystal (-)-menthol, which is a major aromatic agent used as a flavor, fragrance, and cooling sensation vector in the ...

Rapid prototyping and stereolithography in dentistry

PubMed Central

Nayar, Sanjna; Bhuminathan, S.; Bhat, Wasim Manzoor

2015-01-01

The word rapid prototyping (RP) was first used in mechanical engineering field in the early 1980s to describe the act of producing a prototype, a unique product, the first product, or a reference model. In the past, prototypes were handmade by sculpting or casting, and their fabrication demanded a long time. Any and every prototype should undergo evaluation, correction of defects, and approval before the beginning of its mass or large scale production. Prototypes may also be used for specific or restricted purposes, in which case they are usually called a preseries model. With the development of information technology, three-dimensional models can be devised and built based on virtual prototypes. Computers can now be used to create accurately detailed projects that can be assessed from different perspectives in a process known as computer aided design (CAD). To materialize virtual objects using CAD, a computer aided manufacture (CAM) process has been developed. To transform a virtual file into a real object, CAM operates using a machine connected to a computer, similar to a printer or peripheral device. In 1987, Brix and Lambrecht used, for the first time, a prototype in health care. It was a three-dimensional model manufactured using a computer numerical control device, a type of machine that was the predecessor of RP. In 1991, human anatomy models produced with a technology called stereolithography were first used in a maxillofacial surgery clinic in Viena. PMID:26015715

Rapid prototyping and stereolithography in dentistry.

PubMed

Nayar, Sanjna; Bhuminathan, S; Bhat, Wasim Manzoor

2015-04-01

The word rapid prototyping (RP) was first used in mechanical engineering field in the early 1980s to describe the act of producing a prototype, a unique product, the first product, or a reference model. In the past, prototypes were handmade by sculpting or casting, and their fabrication demanded a long time. Any and every prototype should undergo evaluation, correction of defects, and approval before the beginning of its mass or large scale production. Prototypes may also be used for specific or restricted purposes, in which case they are usually called a preseries model. With the development of information technology, three-dimensional models can be devised and built based on virtual prototypes. Computers can now be used to create accurately detailed projects that can be assessed from different perspectives in a process known as computer aided design (CAD). To materialize virtual objects using CAD, a computer aided manufacture (CAM) process has been developed. To transform a virtual file into a real object, CAM operates using a machine connected to a computer, similar to a printer or peripheral device. In 1987, Brix and Lambrecht used, for the first time, a prototype in health care. It was a three-dimensional model manufactured using a computer numerical control device, a type of machine that was the predecessor of RP. In 1991, human anatomy models produced with a technology called stereolithography were first used in a maxillofacial surgery clinic in Viena.

Risk factors for coronary artery calcification in Japanese patients.

PubMed

Shikada, Tomoki; Washio, Masakazu; Nishizaki, Akiko; Kakino, Takamori; Ooe, Kensuke; Ishibashi, Yuuji; Sagara, Shuuichirou; Morishige, Kunio; Tashiro, Hideki

2015-07-01

Because the prevalence of coronary artery calcification is lower among Japanese than among Western individuals, aspects of the Japanese lifestyle might be related to the development of calcification. We aimed to clarify the relationship between coronary artery calcium scores in Japanese patients and various lifestyle factors among the Japanese population. Study subjects were patients aged ≥20 years who underwent multidetector-row computed tomography. A total of 201 patients agreed to take part in this study and answered a questionnaire regarding lifestyle, medical history, and other factors. Old age, current and former smoking, sedentary work, short sleep time, coronary artery stenosis, treatment with statins, medical history of cerebrovascular disease, medical history of angina pectoris, medical history of ischemic heart disease, and medical history of dyslipidemia were associated with higher odds ratios than the other factors examined, while the Japanese-style breakfast (e.g. boiled rice, miso soup, grilled fish) was associated with lower odds ratios. In this study, smoking, sedentary work, short sleep time, and the Japanese-style breakfast were lifestyle factors related to coronary artery calcification. The lifestyle of Japanese people may be related to coronary calcification. Copyright © 2014 Japanese College of Cardiology. Published by Elsevier Ltd. All rights reserved.

Hazcam Prototype

NASA Image and Video Library

2017-11-01

This image shows one of the enhanced engineering cameras with a prototype lens for the Hazcams, which will watch for obstacles encountered by NASA's Mars 2020 rover. https://photojournal.jpl.nasa.gov/catalog/PIA22102

Are Australian Fans of Anime and Manga Motivated to Learn Japanese Language?

ERIC Educational Resources Information Center

Armour, William S.; Iida, Sumiko

2016-01-01

Recent research into Japanese as a foreign language education has strongly emphasized the link between Japanese popular culture and learning Japanese. However, these studies have only targeted Japanese language learners in formal education contexts and have largely ignored those who are not studying Japanese or studying Japanese informally. This…

Japanese encephalitis in a French traveler to Nepal.

PubMed

Lagarde, S; Lagier, J-C; Charrel, R; Quérat, G; Vanhomwegen, J; Desprès, P; Pelletier, J; Kaphan, E

2014-02-01

Japanese encephalitis is frequent in Asia, with a severe prognosis, but rare in travelers. Culex mosquitoes transmit Japanese encephalitis virus. Risk factors are destination, duration of stay, summer and fall seasons, outdoor activities, and type of accommodation. We report the case of a French traveler to Nepal with neutralization-based serological confirmed Japanese encephalitis. He presented classical clinical (viral syndrome before an encephalitis status with behavioral disorder, global hypotonia, mutism, movement disorders, seizure, and coma), radiological (lesions of thalami, cortico-spinal tracts, and brainstem) and biological features (lymphocytic meningitis). Nowadays, the presence of Japanese encephalitis virus in Nepal, including mountain areas, is established but Japanese encephalitis remains rare in travelers returning from this area and neurologist physicians need to become familiar with this. We recommend vaccination for travelers spending a long period of time in Nepal and having at-risk outdoor activities.

Run-Time Support for Rapid Prototyping

DTIC Science & Technology

1988-12-01

prototyping. One such system is the Computer-Aided Proto- typing System (CAPS). It combines rapid prototypng with automatic program generation. Some of the...a design database, and a design management system [Ref. 3:p. 66. By using both rapid prototyping and automatic program genera- tion. CAPS will be...Most proto- typing systems perform these functions. CAPS is different in that it combines rapid prototyping with a variant of automatic program

NASA Innovation Builds Better Nanotubes

NASA Technical Reports Server (NTRS)

2008-01-01

Nanotailor Inc., based in Austin, Texas, licensed Goddard Space Flight Center's unique single-walled carbon nanotube (SWCNT) fabrication process with plans to make high-quality, low-cost SWCNTs available commercially. Carbon nanotubes are being used in a wide variety of applications, and NASA's improved production method will increase their applicability in medicine, microelectronics, advanced materials, and molecular containment. Nanotailor built and tested a prototype based on Goddard's process, and is using this technique to lower the cost and improve the integrity of nanotubes, offering a better product for use in biomaterials, advanced materials, space exploration, highway and building construction, and many other applications.

Japanese Moral Education Past and Present.

ERIC Educational Resources Information Center

Khan, Yoshimitsu

For generations, moral development has been both a conscious aim and a formal process in Japanese education. This book investigates the history and development of Japanese moral education and analyzes and compares current moral education with the concepts of the Imperial Rescript on Education (1890) and the "shushin" moral education of…

The Strategies Used in Japanese Advertisement.

ERIC Educational Resources Information Center

Kurose, Yuki

This paper investigates the possibility of using Japanese advertising language as a teaching tool in the second language classroom. First, it reviews the aims of advertising and the advantages of learning advertising language in the classroom based on previous research. Next, it discusses language strategies used in Japanese advertising,…

Numeral Incorporation in Japanese Sign Language

ERIC Educational Resources Information Center

Ktejik, Mish

2013-01-01

This article explores the morphological process of numeral incorporation in Japanese Sign Language. Numeral incorporation is defined and the available research on numeral incorporation in signed language is discussed. The numeral signs in Japanese Sign Language are then introduced and followed by an explanation of the numeral morphemes which are…

Intercultural Orientations as Japanese Language Learners' Motivation in Mainland China

ERIC Educational Resources Information Center

Lv, Leining; Gao, Xuesong; Teo, Timothy

2017-01-01

This article reports on a study that investigated how 665 Japanese language learners, who had started learning Japanese at different times in the last 3 decades, had been motivated to learn Japanese in China. Analysis of the survey data revealed that the participants displayed similar intercultural orientations when learning Japanese despite the…

Rapid Prototyping of an Aircraft Model in an Object-Oriented Simulation

NASA Technical Reports Server (NTRS)

Kenney, P. Sean

2003-01-01

A team was created to participate in the Mars Scout Opportunity. Trade studies determined that an aircraft provided the best opportunity to complete the science objectives of the team. A high fidelity six degree of freedom flight simulation was required to provide credible evidence that the aircraft design fulfilled mission objectives and to support the aircraft design process by providing performance evaluations. The team created the simulation using the Langley Standard Real-Time Simulation in C++ (LaSRS++) application framework. A rapid prototyping approach was necessary because the team had only three months to both develop the aircraft simulation model and evaluate aircraft performance as the design and mission parameters matured. The design of LaSRS++ enabled rapid-prototyping in several ways. First, the framework allowed component models to be designed, implemented, unit-tested, and integrated quickly. Next, the framework provides a highly reusable infrastructure that allowed developers to maximize code reuse while concentrating on aircraft and mission specific features. Finally, the framework reduces risk by providing reusable components that allow developers to build a quality product with a compressed testing cycle that relies heavily on unit testing of new components.

High confidence in falsely recognizing prototypical faces.

PubMed

Sampaio, Cristina; Reinke, Victoria; Mathews, Jeffrey; Swart, Alexandra; Wallinger, Stephen

2018-06-01

We applied a metacognitive approach to investigate confidence in recognition of prototypical faces. Participants were presented with sets of faces constructed digitally as deviations from prototype/base faces. Participants were then tested with a simple recognition task (Experiment 1) or a multiple-choice task (Experiment 2) for old and new items plus new prototypes, and they showed a high rate of confident false alarms to the prototypes. Confidence and accuracy relationship in this face recognition paradigm was found to be positive for standard items but negative for the prototypes; thus, it was contingent on the nature of the items used. The data have implications for lineups that employ match-to-suspect strategies.

Japanese Experiment Module arrival

NASA Image and Video Library

2007-03-29

The Experiment Logistics Module Pressurized Section for the Japanese Experiment Module arrives at the Space Station Processing Facility. The logistics module is one of the components of the Japanese Experiment Module or JEM, also known as Kibo, which means "hope" in Japanese. Kibo comprises six components: two research facilities -- the Pressurized Module and Exposed Facility; a Logistics Module attached to each of them; a Remote Manipulator System; and an Inter-Orbit Communication System unit. Kibo also has a scientific airlock through which experiments are transferred and exposed to the external environment of space. Kibo is Japan's first human space facility and its primary contribution to the station. Kibo will enhance the unique research capabilities of the orbiting complex by providing an additional environment in which astronauts can conduct science experiments. The various components of JEM will be assembled in space over the course of three Space Shuttle missions. The first of those three missions, STS-123, will carry the Experiment Logistics Module Pressurized Section aboard the Space Shuttle Endeavour, targeted for launch in 2007.

Japanese Experiment Module arrival

NASA Image and Video Library

2007-03-29

Inside the Space Station Processing Facility, the Experiment Logistics Module Pressurized Section for the Japanese Experiment Module is revealed after the top of the crate is removed. The logistics module is one of the components of the Japanese Experiment Module or JEM, also known as Kibo, which means "hope" in Japanese. Kibo comprises six components: two research facilities -- the Pressurized Module and Exposed Facility; a Logistics Module attached to each of them; a Remote Manipulator System; and an Inter-Orbit Communication System unit. Kibo also has a scientific airlock through which experiments are transferred and exposed to the external environment of space. Kibo is Japan's first human space facility and its primary contribution to the station. Kibo will enhance the unique research capabilities of the orbiting complex by providing an additional environment in which astronauts can conduct science experiments. The various components of JEM will be assembled in space over the course of three Space Shuttle missions. The first of those three missions, STS-123, will carry the Experiment Logistics Module Pressurized Section aboard the Space Shuttle Endeavour, targeted for launch in 2007.

Japanese Experiment Module arrival

NASA Image and Video Library

2007-03-29

The Experiment Logistics Module Pressurized Section for the Japanese Experiment Module arrives at the Space Station Processing Facility for uncrating. The logistics module is one of the components of the Japanese Experiment Module or JEM, also known as Kibo, which means "hope" in Japanese. Kibo comprises six components: two research facilities -- the Pressurized Module and Exposed Facility; a Logistics Module attached to each of them; a Remote Manipulator System; and an Inter-Orbit Communication System unit. Kibo also has a scientific airlock through which experiments are transferred and exposed to the external environment of space. Kibo is Japan's first human space facility and its primary contribution to the station. Kibo will enhance the unique research capabilities of the orbiting complex by providing an additional environment in which astronauts can conduct science experiments. The various components of JEM will be assembled in space over the course of three Space Shuttle missions. The first of those three missions, STS-123, will carry the Experiment Logistics Module Pressurized Section aboard the Space Shuttle Endeavour, targeted for launch in 2007.

Building a generalized distributed system model

NASA Technical Reports Server (NTRS)

Mukkamala, Ravi; Foudriat, E. C.

1991-01-01

A modeling tool for both analysis and design of distributed systems is discussed. Since many research institutions have access to networks of workstations, the researchers decided to build a tool running on top of the workstations to function as a prototype as well as a distributed simulator for a computing system. The effects of system modeling on performance prediction in distributed systems and the effect of static locking and deadlocks on the performance predictions of distributed transactions are also discussed. While the probability of deadlock is considerably small, its effects on performance could be significant.

Japanese Suffixal Accentuation and Lexical Phonology.

ERIC Educational Resources Information Center

Tsujimura, Natsuko

A study examined the applicability of the Ordering Hypothesis to Japanese suffixes. The hypothesis, which claims that affixes that trigger phonological rules (cyclical affixes) do not appear external to affixes that do not, is found to be an inappropriate assumption in Japanese. Examples in English and Chamorro support this finding. It is…

Japanese-Style Management: A Bibliometric Study.

ERIC Educational Resources Information Center

Noguchi, Sachie

1988-01-01

Reports results of a bibliometric study of the literature on Japanese-style management published in western languages from 1971-84 in order to: (1) determine Japanese contributions to the literature; (2) determine whether there are nuclear journals for the subject; and (3) investigate how the flow of information from Japan to overseas countries…

Metabolic syndrome in overweight and obese Japanese children.

PubMed

Yoshinaga, Masao; Tanaka, Satoru; Shimago, Atsushi; Sameshima, Koji; Nishi, Junichiro; Nomura, Yuichi; Kawano, Yoshifumi; Hashiguchi, Jun; Ichiki, Takeo; Shimizu, Shinichiro

2005-07-01

To determine the prevalence of and sex differences related to the metabolic syndrome among obese and overweight elementary school children. Subjects were 471 overweight or obese Japanese children. Children meeting at least three of the following five criteria qualified as having the metabolic syndrome: abdominal obesity, elevated blood pressure, low high-density lipoprotein-cholesterol levels, high triglyceride levels, and high fasting glucose levels. Fasting insulin levels were also examined. Japanese obese children were found to have a significantly lower prevalence (17.7%) of the metabolic syndrome than U.S. obese adolescents (28.7%, p = 0.0014). However, Japanese overweight children had a similar incidence (8.7%) of the metabolic syndrome compared with U.S. overweight adolescents (6.8%). Hyperinsulinemia in girls and abdominal obesity in boys are characteristic features of individual metabolic syndrome factors in Japanese children. The prevalence of the metabolic syndrome is not lower in preteen Japanese overweight children than in U.S. overweight adolescents, although it is significantly lower in Japanese obese preteen children than in U.S. obese adolescents. Primary and secondary interventions are needed for overweight preteen children in Japan.

Cytokine profile and proviral load among Japanese immigrants and non-Japanese infected with HTLV-1 in a non-endemic area of Brazil.

PubMed

Domingos, João Américo; Soares, Luana Silva; Bandeira, Larissa M; Bonin, Camila Mareti; Vicente, Ana C P; Zanella, Louise; Puga, Marco Antonio Moreira; Tozetti, Inês Aparecida; Motta-Castro, Ana Rita Coimbra; da Cunha, Rivaldo Venâncio

2017-01-01

The lifetime risk of HTLV-1-associated myelopathy/tropical spastic paraparesis (HAM/TSP) development differs among ethnic groups. To better understand these differences, this prospective cohort study was conducted to investigate the cytokine profile and the HTLV-1 proviral load (PVL) in Japanese and non-Japanese populations with HAM/TSP and asymptomatic carriers (ACs). The serum IL-2, IL-4, IL-6, IL-10, IL-17, TNF-α, and IFN-γ levels were quantified using the Cytometric Bead Array in 40 HTLV-1-infected patients (11 HAM/TSP and 29 ACs) and 18 healthy controls (HCs) in Brazil. Among ACs, 15 were Japanese descendants and 14 were non-Japanese. Of 11 patients with HAM/TSP, only one was a Japanese descendant. The HTLV-1 PVL was quantified by real-time PCR. The HTLV-1 PVL was 2.7-fold higher in HAM/TSP patients than ACs. Regardless of the clinical outcome, the PVL was significantly higher in patients younger than 60 years than older patients. The HAM/TSP and ACs had higher IL-10 serum concentrations than that of HCs. The ACs also showed higher IL-6 serum levels than those of HCs. According to age, the IL-10 and IL-6 levels were higher in ACs non-Japanese patients older than 60 years. HAM/TSP patients showed a positive correlation between IL-6 and IL-17 and a negative correlation between the PVL and IL-17 and IFN-γ. In the all ACs, a significant positive correlation was observed between IL-2 and IL-17 and a negative correlation was detected between IL-10 and TNF-α. Only 6.25% of the Japanese patients were symptomatic carriers, compared with 41.67% of the non-Japanese patients. In conclusion, this study showed that high levels of HTLV-1 PVL was intrinsicaly associated with the development of HAM/TSP. A higher HTLV-1 PVL and IL10 levels found in non-Japanese ACs over 60 years old, which compared with the Japanese group depicts that the ethnic background may interfere in the host immune status. More researches also need to be undertaken regarding the host genetic

Cytokine profile and proviral load among Japanese immigrants and non-Japanese infected with HTLV-1 in a non-endemic area of Brazil

PubMed Central

Domingos, João Américo; Soares, Luana Silva; Bandeira, Larissa M.; Bonin, Camila Mareti; Vicente, Ana C. P.; Zanella, Louise; Puga, Marco Antonio Moreira; Tozetti, Inês Aparecida; Motta-Castro, Ana Rita Coimbra; da Cunha, Rivaldo Venâncio

2017-01-01

The lifetime risk of HTLV-1-associated myelopathy/tropical spastic paraparesis (HAM/TSP) development differs among ethnic groups. To better understand these differences, this prospective cohort study was conducted to investigate the cytokine profile and the HTLV-1 proviral load (PVL) in Japanese and non-Japanese populations with HAM/TSP and asymptomatic carriers (ACs). The serum IL-2, IL-4, IL-6, IL-10, IL-17, TNF-α, and IFN-γ levels were quantified using the Cytometric Bead Array in 40 HTLV-1-infected patients (11 HAM/TSP and 29 ACs) and 18 healthy controls (HCs) in Brazil. Among ACs, 15 were Japanese descendants and 14 were non-Japanese. Of 11 patients with HAM/TSP, only one was a Japanese descendant. The HTLV-1 PVL was quantified by real-time PCR. The HTLV-1 PVL was 2.7-fold higher in HAM/TSP patients than ACs. Regardless of the clinical outcome, the PVL was significantly higher in patients younger than 60 years than older patients. The HAM/TSP and ACs had higher IL-10 serum concentrations than that of HCs. The ACs also showed higher IL-6 serum levels than those of HCs. According to age, the IL-10 and IL-6 levels were higher in ACs non-Japanese patients older than 60 years. HAM/TSP patients showed a positive correlation between IL-6 and IL-17 and a negative correlation between the PVL and IL-17 and IFN-γ. In the all ACs, a significant positive correlation was observed between IL-2 and IL-17 and a negative correlation was detected between IL-10 and TNF-α. Only 6.25% of the Japanese patients were symptomatic carriers, compared with 41.67% of the non-Japanese patients. In conclusion, this study showed that high levels of HTLV-1 PVL was intrinsicaly associated with the development of HAM/TSP. A higher HTLV-1 PVL and IL10 levels found in non-Japanese ACs over 60 years old, which compared with the Japanese group depicts that the ethnic background may interfere in the host immune status. More researches also need to be undertaken regarding the host genetic

Japanese encephalitis

PubMed Central

Yun, Sang-Im; Lee, Young-Min

2014-01-01

Japanese encephalitis (JE) is an infectious disease of the central nervous system caused by Japanese encephalitis virus (JEV), a zoonotic mosquito-borne flavivirus. JEV is prevalent in much of Asia and the Western Pacific, with over 4 billion people living at risk of infection. In the absence of antiviral intervention, vaccination is the only strategy to develop long-term sustainable protection against JEV infection. Over the past half-century, a mouse brain-derived inactivated vaccine has been used internationally for active immunization. To date, however, JEV is still a clinically important, emerging, and re-emerging human pathogen of global significance. In recent years, production of the mouse brain-derived vaccine has been discontinued, but 3 new cell culture-derived vaccines are available in various parts of the world. Here we review current aspects of JEV biology, summarize the 4 types of JEV vaccine, and discuss the potential of an infectious JEV cDNA technology for future vaccine development. PMID:24161909

Acoustic Sources of Accent in Second Language Japanese Speech.

PubMed

Idemaru, Kaori; Wei, Peipei; Gubbins, Lucy

2018-05-01

This study reports an exploratory analysis of the acoustic characteristics of second language (L2) speech which give rise to the perception of a foreign accent. Japanese speech samples were collected from American English and Mandarin Chinese speakers ( n = 16 in each group) studying Japanese. The L2 participants and native speakers ( n = 10) provided speech samples modeling after six short sentences. Segmental (vowels and stops) and prosodic features (rhythm, tone, and fluency) were examined. Native Japanese listeners ( n = 10) rated the samples with regard to degrees of foreign accent. The analyses predicting accent ratings based on the acoustic measurements indicated that one of the prosodic features in particular, tone (defined as high and low patterns of pitch accent and intonation in this study), plays an important role in robustly predicting accent rating in L2 Japanese across the two first language (L1) backgrounds. These results were consistent with the prediction based on phonological and phonetic comparisons between Japanese and English, as well as Japanese and Mandarin Chinese. The results also revealed L1-specific predictors of perceived accent in Japanese. The findings of this study contribute to the growing literature that examines sources of perceived foreign accent.

Rapid Prototyping: An Alternative Instructional Design Strategy.

ERIC Educational Resources Information Center

Tripp, Steven D.; Bichelmeyer, Barbara

1990-01-01

Discusses the nature of instructional design and describes rapid prototyping as a feasible model for instructional system design (ISD). The use of prototyping in software engineering is described, similarities between software design and instructional design are discussed, and an example is given which uses rapid prototyping in designing a…

Business Japanese, a HyperCard Simulation.

ERIC Educational Resources Information Center

Saito-Abbott, Yoshiko; Abbott, Thomas

This paper describes Business Japanese (BJ), a HyperCard based tutorial designed as courseware for use in a third-year Japanese course at the University of Texas, Austin (UTA). A major objective was to develop good courseware based on proven language learning theory that would integrate theory, practice, and technology. BJ stresses a realistic and…

Study and prototype of data system interactions for the Earth Observing System Data and Information System

NASA Technical Reports Server (NTRS)

Emmitt, G. D.; Wood, S. A.; Morris, M.

1990-01-01

A crucial part of the Earth Observing System (EOS) is its Data and Information System (EOSDIS). The success of EOS depends not only on its instruments and science studies, but also on its ability to help scientists integrate data sets of geophysical and biological measurements taken by various instruments and investigators. NASA contractors have completed Phase B studies of EOSDIS, in particular its architecture, functionality, and user interfacing. At this point in time, it may seem impossible to exercise the EOSDIS or any of its components since they do not exist; i.e., if the EOSDIS is accepted as a totally new system, distinct from any existing DIS. However, if EOSDIS is seen as evolving from existing data systems, then some limited prototyping studies can be conducted by using currently functioning systems. In support of both the EOSDIS Science Advisory Panel and the EOSDIS Project, a prototyping activity was carried out by a cross section of interdisciplinary scientists. That prototyping activity is summarized and some conclusions are drawn that can be used by NASA-Goddard to evaluate and modify the specifications soon to be released in an RFP to build EOSDIS.

Contamination source review for Building E3180, Edgewood Area, Aberdeen Proving Ground, Maryland

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zellmer, S.D.; Smits, M.P.; Rueda, J.

1995-09-01

This report was prepared by Argonne National Laboratory (ANL) to document the results of a contamination source review of Building E3180 at the Aberdeen Proving Ground (APG) in Maryland. The report may be used to assist the US Army in planning for the future use or disposition of this building. The review included a historical records search, physical inspection, photographic documentation, geophysical investigation, collection of air samples, and review of available records regarding underground storage tanks associated with Building E3180. The field investigations were performed by ANL during 1994. Building,E3180 (current APG designation) is located near the eastern end ofmore » Kings Creek Road, north of Kings Creek, and about 0.5 miles east of the airstrip within APG`s Edgewood Area. The building was constructed in 1944 as a facsimile of a Japanese pillbox and used for the development of flame weapons systems until 1957 (EAI Corporation 1989). The building was not used from 1957 until 1965, when it was converted and used as a flame and incendiary laboratory. During the 1970s, the building was converted to a machine (metal) shop and used for that purpose until 1988.« less

Adult perceptions of phonotactic violations in Japanese

NASA Astrophysics Data System (ADS)

Fais, Laurel; Kajikawa, Sachiyo; Werker, Janet; Amano, Shigeaki

2004-05-01

Adult Japanese speakers ``hear'' epenthetic vowels in productions of Japanese-like words that violate the canonical CVCVCV form by containing internal consonant clusters (CVCCV) [Dupoux et al., J. Exp. Psychol. 25, 1568-1578 (1999)]. Given this finding, this research examined how Japanese adults rated the goodness of Japanese-like words produced without a vowel in the final syllable (CVC), and words produced without vowels in the penultimate and final syllables (CVCC). Furthermore, in some of these contexts, voiceless vowels may appear in fluent, casual Japanese productions, especially in the Kanto dialect, and in some, such voiceless vowels may not appear. Results indicate that both Kanto and Kinki speakers rated CVC productions for contexts in which voiceless vowels are not allowed as the worst; they rated CVC and CVCC contexts in which voiceless vowel productions are allowed as better. In these latter contexts, the CVC words, which result from the loss of one, final, vowel, are judged to be better than the CVCC words, which result from the loss of two (final and penultimate) vowels. These results mirror the relative seriousness of the phonotactic violations and indicate listeners have tacit knowledge of these regularities in their language.

[Emotional display rules of Japanese and Koreans].

PubMed

Lee, Ye-jin; Matsumoto, Yoshiyuki

2011-12-01

Hypothetical stories designed to arouse feelings of happiness, sadness, or anger were presented to Japanese (n = 310) and Koreans (n = 286) university students. They were asked to rate the intensity of the emotion experienced, and to select the corresponding facial expression to display in an individual situation and in a social situation. Analyses of covariance were conducted on the rating scores of facial expression using the intensities of emotion as the covariance, except for happiness where the within-class regression coefficients were not homogeneous. The results showed that Japanese and Koreans shared the emotional display rules about the expressions of emotions in individual situations more than in social situations. Japanese thought that they should suppress emotions more than Koreans did. Moreover, the differences in facial expressions between Japanese and Koreans were greater in the individual situations than in the social situations.

16 CFR 1633.4 - Prototype testing requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Prototype testing requirements. 1633.4... STANDARD FOR THE FLAMMABILITY (OPEN FLAME) OF MATTRESS SETS The Standard § 1633.4 Prototype testing... three specimens of each prototype to be tested according to § 1633.7 and obtain passing test results...

The Influence of Japanese Public Opinion and Government Policy on the Planning and Execution of U.S. - Japanese Bilateral Ground Exercises

DTIC Science & Technology

1990-06-01

baseline knowledge of the 6 0L aa Y.S 00 evolution of Japanese Defense Policy focused on major defense-policy agreements and issues. The baseline...bilaterally with their Japanese counterparts. (Japanese soldiers stationed in northern Japan are excellent military skiers .) U.S. soldiers who receive...other cases, interviewees had knowledge and expertise regarding the evolution of bilateral exercises and negotiations necessary to initiate bilateral

Japanese Robotic SFA during Expedition 22

NASA Image and Video Library

2010-03-10

ISS022-E-089764 (10 March 2010) --- Looking through the Kibo airlock, the Japanese robotic Small Fine Arm (SFA), also known as ?Ko-bot?, is featured in this image photographed by an Expedition 22 crew member in the Kibo laboratory of the International Space Station during its installation on the external Japanese Experiment Module - Exposed Facility.

Performance of prototype high-flow inhalable dust sampler in a livestock production facility.

PubMed

Anthony, T Renée; Cai, Changjie; Mehaffy, John; Sleeth, Darrah; Volckens, John

2017-05-01

A high-flow inhalable sampler, designed for operational flow rates up to 10 L/min using computer simulations and examined in wind tunnel experiments, was evaluated in the field. This prototype sampler was deployed in collocation with an IOM (the benchmark standard sampler) in a swine farrowing building to examine the sampling performance for assessing concentrations of inhalable particulate mass and endotoxin. Paired samplers were deployed for 24 hr on 19 days over a 3-month period. On each sampling day, the paired samplers were deployed at three fixed locations and data were analyzed to identify agreement and to examine systematic biases between concentrations measured by these samplers. Thirty-six paired gravimetric samples were analyzed; insignificant, unsubstantial differences between concentrations were identified between the two samplers (p = 0.16; mean difference 0.03 mg/m 3 ). Forty-four paired samples were available for endotoxin analysis, and a significant (p = 0.001) difference in endotoxin concentration was identified: the prototype sampler, on average, had 120 EU/m 3 more endotoxin than did the IOM samples. Since the same gravimetric samples were analyzed for endotoxin content, the endotoxin difference is likely attributable to differences in endotoxin extraction. The prototype's disposable thin-film polycarbonate capsule was included with the filter in the 1-hr extraction procedure while the internal plastic cassette of the IOM required a rinse procedure that is susceptible to dust losses. Endotoxin concentrations measured with standard plastic IOM inserts that follow this rinsing procedure may underestimate the true endotoxin exposure concentrations. The maximum concentrations in the study (1.55 mg/m 3 gravimetric, 2328 EU/m 3 endotoxin) were lower than other agricultural or industrial environments. Future work should explore the performance of the prototype sampler in dustier environments, where concentrations approach particulates not otherwise

[Evaluation of "Japanese Journal of Psychology" using citation analysis].

PubMed

Kato, Tsukasa; Baba, Mamiko; Tabata, Naoya; Shimoda, Shunsuke; Fukuda, Mildki; Okubo, Nobutoshi

2013-06-01

This study investigated the professional impact of "Japanese Journal of Psychology." Thirty four psychological journals written in Japanese were selected to register articles in a new database. This database included approximately 23,900 articles published through 2010. Using citations extracted from the references and footnotes in these scholarly journals, the Psychology Citation Index for Japanese Papers was created. The citation impact factors in Japanese psychology was determined on the basis of the number of times a journal was cited, cumulative impact factors, and the cited half-life of the journal; five years was a valid period for impact factor of psychological journals in Japan. The changes in the 5-year impact factors of "Japanese Journal of Psychology" were reviewed by comparing it with other journals.

Spreadsheet Applications: Prototyping an Innovative Blended Course

ERIC Educational Resources Information Center

Baker, J. Howard

2004-01-01

After teaching the advanced spreadsheet course at a major university in Louisiana as a traditional classroom course for a number of years, it was decided to create a prototype-blended course, with a considerable portion offered via distance education. This research, which uses a prototyping methodology, is exploratory in nature. Prototyping can…

Designing Instructor-Led Schools with Rapid Prototyping.

ERIC Educational Resources Information Center

Lange, Steven R.; And Others

1996-01-01

Rapid prototyping involves abandoning many of the linear steps of traditional prototyping; it is instead a series of design iterations representing each major stage. This article describes the development of an instructor-led course for midlevel auditors using the principles and procedures of rapid prototyping, focusing on the savings in time and…

46 CFR 161.013-11 - Prototype test.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 6 2010-10-01 2010-10-01 false Prototype test. 161.013-11 Section 161.013-11 Shipping...: SPECIFICATIONS AND APPROVAL ELECTRICAL EQUIPMENT Electric Distress Light for Boats § 161.013-11 Prototype test. (a) Each manufacturer must test a prototype light identical to the lights to be certified prior to...

46 CFR 161.013-11 - Prototype test.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 6 2014-10-01 2014-10-01 false Prototype test. 161.013-11 Section 161.013-11 Shipping...: SPECIFICATIONS AND APPROVAL ELECTRICAL EQUIPMENT Electric Distress Light for Boats § 161.013-11 Prototype test. (a) Each manufacturer must test a prototype light identical to the lights to be certified prior to...

Zero Energy Building Pays for Itself: Odyssey Elementary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Torcellini, Paul A

Odyssey Elementary is a large public school in an area of Utah with a growing population. Created as a prototype for the Davis School District, Odyssey is a zero energy building whose design has already been copied for two other new schools, both of which are targeting zero energy. It has a unique design with four 'houses' (or classroom wings) featuring generously daylit classrooms. This design contributes to the school's energy efficiency. In an effort to integrate positive messages about fitness into the learning environment, each house has a different take on the theme of 'bodies in motion' in themore » natural world. In a postoccupancy survey of parents, students, and teachers, more than 87% were satisfied with the building overall.« less

Northwest Energy Efficient Manufactured Housing Program: High Performance Manufactured Home Prototyping and Construction Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hewes, Tom; Peeks, Brady

2013-11-01

The Building America Partnership for Improved Residential Construction, the Bonneville Power Administration (BPA), and Northwest Energy Works (NEW), the current Northwest Energy Efficient Manufactured Housing Program (NEEM) administrator, have been collaborating to conduct research on new specifications that would improve on the energy requirements of a NEEM home. In its role as administrator, NEW administers the technical specs, performs research and engineering analysis, implements ongoing construction quality management procedures, and maintains a central database with home tracking. This project prototyped and assessed the performances of cost-effective high performance building assemblies and mechanical systems that are not commonly deployed in themore » manufacturing setting. The package of measures is able to reduce energy used for space conditioning, water heating and lighting by 50 percent over typical manufactured homes produced in the northwest.« less

Use of spoken and written Japanese did not protect Japanese-American men from cognitive decline in late life.

PubMed

Crane, Paul K; Gruhl, Jonathan C; Erosheva, Elena A; Gibbons, Laura E; McCurry, Susan M; Rhoads, Kristoffer; Nguyen, Viet; Arani, Keerthi; Masaki, Kamal; White, Lon

2010-11-01

Spoken bilingualism may be associated with cognitive reserve. Mastering a complicated written language may be associated with additional reserve. We sought to determine if midlife use of spoken and written Japanese was associated with lower rates of late life cognitive decline. Participants were second-generation Japanese-American men from the Hawaiian island of Oahu, born 1900-1919, free of dementia in 1991, and categorized based on midlife self-reported use of spoken and written Japanese (total n included in primary analysis = 2,520). Cognitive functioning was measured with the Cognitive Abilities Screening Instrument scored using item response theory. We used mixed effects models, controlling for age, income, education, smoking status, apolipoprotein E e4 alleles, and number of study visits. Rates of cognitive decline were not related to use of spoken or written Japanese. This finding was consistent across numerous sensitivity analyses. We did not find evidence to support the hypothesis that multilingualism is associated with cognitive reserve.

Registry of the Japanese Society of Lung and Heart-Lung Transplantation: the official Japanese lung transplantation report 2008.

PubMed

Shiraishi, Takeshi; Okada, Yoshinori; Sekine, Yasuo; Chida, Masayuki; Bando, Toru; Minami, Masato; Oto, Takahiro; Nagayasu, Takeshi; Date, Hiroshi; Kondo, Takashi

2009-08-01

The year 2008 marked the 10th anniversary of the Japanese lung transplantation program started in accordance with the Japanese Organ Transplant Law, which took effect in 1997. A total of 105 lung transplantations, including 39 deceased-donor transplants and 66 living-related transplants, had been performed as of the end of 2007. This article is the 2008 official report of the Japanese Society of Lung and Heart-Lung Transplantation. It summarizes the data for clinical lung transplantation during the period 1998-2007 and discusses the current status of Japanese lung transplantation. The overall 5-year survival rate was 67.0%: including 53.4% and 74.6% for deceased-donor lung transplantation and living-donor lobar lung transplantation groups, respectively. The total operation-related and 1-month mortality rates after surgery were 3.8% and 10.4%, respectively. These data are better, or at least acceptable, in comparison with the international registry data.

Use of Spoken and Written Japanese Did Not Protect Japanese-American Men From Cognitive Decline in Late Life

PubMed Central

Gruhl, Jonathan C.; Erosheva, Elena A.; Gibbons, Laura E.; McCurry, Susan M.; Rhoads, Kristoffer; Nguyen, Viet; Arani, Keerthi; Masaki, Kamal; White, Lon

2010-01-01

Objectives. Spoken bilingualism may be associated with cognitive reserve. Mastering a complicated written language may be associated with additional reserve. We sought to determine if midlife use of spoken and written Japanese was associated with lower rates of late life cognitive decline. Methods. Participants were second-generation Japanese-American men from the Hawaiian island of Oahu, born 1900–1919, free of dementia in 1991, and categorized based on midlife self-reported use of spoken and written Japanese (total n included in primary analysis = 2,520). Cognitive functioning was measured with the Cognitive Abilities Screening Instrument scored using item response theory. We used mixed effects models, controlling for age, income, education, smoking status, apolipoprotein E e4 alleles, and number of study visits. Results. Rates of cognitive decline were not related to use of spoken or written Japanese. This finding was consistent across numerous sensitivity analyses. Discussion. We did not find evidence to support the hypothesis that multilingualism is associated with cognitive reserve. PMID:20639282

Testing and Characterization of a Prototype Telescope for the Evolved Laser Interferometer Space Antenna (eLISA)

NASA Technical Reports Server (NTRS)

Sankar, S.; Livas, J.

2016-01-01

We describe our efforts to fabricate, test and characterize a prototype telescope for the eLISA mission. Much of our work has centered on the modeling and measurement of scattered light performance. This work also builds on a previous demonstration of a high dimensional stability metering structure using particular choices of materials and interfaces. We will discuss ongoing plans to merge these two separate demonstrations into a single telescope design demonstrating both stray light and dimensional stability requirements simultaneously.

The application of virtual prototyping methods to determine the dynamic parameters of mobile robot

NASA Astrophysics Data System (ADS)

Kurc, Krzysztof; Szybicki, Dariusz; Burghardt, Andrzej; Muszyńska, Magdalena

2016-04-01

The paper presents methods used to determine the parameters necessary to build a mathematical model of an underwater robot with a crawler drive. The parameters present in the dynamics equation will be determined by means of advanced mechatronic design tools, including: CAD/CAE software andMES modules. The virtual prototyping process is described as well as the various possible uses (design adaptability) depending on the optional accessories added to the vehicle. A mathematical model is presented to show the kinematics and dynamics of the underwater crawler robot, essential for the design stage.

Education for International Understanding in Japanese Schools.

ERIC Educational Resources Information Center

Sato, Teruo

1979-01-01

Describes the evolution and current status of education for international understanding within the Japanese school system. Topics discussed include the UNESCO associated schools, Japanese schools overseas, experimental schools for students who have returned from abroad, curricula, and objectives by grade level. (DB)

Nucleotide sequences of Japanese isolates of citrus vein enation virus.

PubMed

Nakazono-Nagaoka, Eiko; Fujikawa, Takashi; Iwanami, Toru

2017-03-01

The genomic sequences of five Japanese isolates of citrus vein enation virus (CVEV) isolates that induce vein enation were determined and compared with that of the Spanish isolate VE-1. The nucleotide sequences of all Japanese isolates were 5,983 nt in length. The genomic RNA of Japanese isolates had five potential open reading frames (ORF 0, ORF 1, ORF 2, ORF 3, and ORF 5) in the positive-sense strand. The nucleotide sequence identity among the Japanese isolates and Spanish isolate VE-1 ranged from 98.0% to 99.8%. Comparison of the partial amino acid sequences of ten Japanese isolates and three Spanish isolates suggested that four amino acid residues, at positions of 83, 104, and 113 in ORF 2 and position 41 in ORF 5, might be unique to some Japanese isolates.

Regional Classification of Traditional Japanese Folk Songs

NASA Astrophysics Data System (ADS)

Kawase, Akihiro; Tokosumi, Akifumi

In this study, we focus on the melodies of Japanese folk songs, and examine the basic structures of Japanese folk songs that represent the characteristics of different regions. We sample the five largest song genres within the music corpora of the Nihon Min-yo Taikan (Anthology of Japanese Folk Songs), consisting of 202,246 tones from 1,794 song pieces from 45 prefectures in Japan. Then, we calculate the probabilities of 24 transition patterns that fill the interval of the perfect fourth pitch, which is the interval that maintains most of the frequency for one-step and two-step pitch transitions within 11 regions, in order to determine the parameters for cluster analysis. As a result, we successively classify the regions into two basic groups, eastern Japan and western Japan, which corresponds to geographical factors and cultural backgrounds, and also match accent distributions in the Japanese language.

Offers and Requests: Performance by Japanese Learners of English.

ERIC Educational Resources Information Center

Fukushima, Saeko

1990-01-01

A comparison of native and nonnative (Japanese) English speakers' expressions for offers and requests found that Japanese subjects were typically too direct in most situations and sounded rude, even when they intended to be polite. This suggests that the pragmatic competence of Japanese learners of English needs to be reinforced in language…

The Japanese Automobile Worker: A Microcosm of Japan's Success.

ERIC Educational Resources Information Center

Kaderabeck, Elizabeth A.

A teaching unit on the Japanese automobile worker was developed from a compilation of on-site interviews with Japanese company managers and production line employees, and official publications of the Japanese car industry. The unit is designed to present a balanced picture of Japan's economic success and labor relations and to develop global…

The skeletal maturation status estimated by statistical shape analysis: axial images of Japanese cervical vertebra.

PubMed

Shin, S M; Kim, Y-I; Choi, Y-S; Yamaguchi, T; Maki, K; Cho, B-H; Park, S-B

2015-01-01

To evaluate axial cervical vertebral (ACV) shape quantitatively and to build a prediction model for skeletal maturation level using statistical shape analysis for Japanese individuals. The sample included 24 female and 19 male patients with hand-wrist radiographs and CBCT images. Through generalized Procrustes analysis and principal components (PCs) analysis, the meaningful PCs were extracted from each ACV shape and analysed for the estimation regression model. Each ACV shape had meaningful PCs, except for the second axial cervical vertebra. Based on these models, the smallest prediction intervals (PIs) were from the combination of the shape space PCs, age and gender. Overall, the PIs of the male group were smaller than those of the female group. There was no significant correlation between centroid size as a size factor and skeletal maturation level. Our findings suggest that the ACV maturation method, which was applied by statistical shape analysis, could confirm information about skeletal maturation in Japanese individuals as an available quantifier of skeletal maturation and could be as useful a quantitative method as the skeletal maturation index.

The skeletal maturation status estimated by statistical shape analysis: axial images of Japanese cervical vertebra

PubMed Central

Shin, S M; Choi, Y-S; Yamaguchi, T; Maki, K; Cho, B-H; Park, S-B

2015-01-01

Objectives: To evaluate axial cervical vertebral (ACV) shape quantitatively and to build a prediction model for skeletal maturation level using statistical shape analysis for Japanese individuals. Methods: The sample included 24 female and 19 male patients with hand–wrist radiographs and CBCT images. Through generalized Procrustes analysis and principal components (PCs) analysis, the meaningful PCs were extracted from each ACV shape and analysed for the estimation regression model. Results: Each ACV shape had meaningful PCs, except for the second axial cervical vertebra. Based on these models, the smallest prediction intervals (PIs) were from the combination of the shape space PCs, age and gender. Overall, the PIs of the male group were smaller than those of the female group. There was no significant correlation between centroid size as a size factor and skeletal maturation level. Conclusions: Our findings suggest that the ACV maturation method, which was applied by statistical shape analysis, could confirm information about skeletal maturation in Japanese individuals as an available quantifier of skeletal maturation and could be as useful a quantitative method as the skeletal maturation index. PMID:25411713

[Research on Japanese monograph of comprehensive dietetic materia medica, the Pao chu bei yong wo ming ben cao (Japanese Materia Medica Prepared for Kitchen)].

PubMed

Zhou, M; Ye, J

2017-11-28

Japanese physicians of Edo Period (1603-1867) wrote many dietetic books, by combining the knowledge system (content and compiling style) and thoughts of diet therapy from China with local condition in Japan. Among them, the Pao chu bei yong wo ming ben cao ( Japanese Materia Medica Prepared for Kitchen ), written by Mukai Genshou, a physician in the early Edo, is the earliest comprehensive work of dietetic materia medica. In this book, the choice and usage of Japanese dietetic materia medica reveals obvious Japanese local color, including the name, morphology, cultivation, collection, identification, nature and flavor, and indication etc., reflecting the sprouting idea of edible herbal plant at the beginning of Edo period and the characteristic of absorbing Chinese diet thoughts by Japanese physician. This is the important first-hand historical material to understand the development of Japanese dietetic herbalism in early Edo and its dietotherapy culture.

The Japanese and the American First-Line Supervisor.

ERIC Educational Resources Information Center

Bryan, Leslie A., Jr.

1982-01-01

Compares the American and Japanese first-line supervisor: production statistics, supervisory style, company loyalty, management style, and communication. Also suggests what Americans might learn from the Japanese methods. (CT)

Japanese Experiment Module arrival

NASA Image and Video Library

2007-03-29

Inside the Space Station Processing Facility, workers monitor progress as a huge crane is used to remove the top of the crate carrying the Experiment Logistics Module Pressurized Section for the Japanese Experiment Module. The logistics module is one of the components of the Japanese Experiment Module or JEM, also known as Kibo, which means "hope" in Japanese. Kibo comprises six components: two research facilities -- the Pressurized Module and Exposed Facility; a Logistics Module attached to each of them; a Remote Manipulator System; and an Inter-Orbit Communication System unit. Kibo also has a scientific airlock through which experiments are transferred and exposed to the external environment of space. Kibo is Japan's first human space facility and its primary contribution to the station. Kibo will enhance the unique research capabilities of the orbiting complex by providing an additional environment in which astronauts can conduct science experiments. The various components of JEM will be assembled in space over the course of three Space Shuttle missions. The first of those three missions, STS-123, will carry the Experiment Logistics Module Pressurized Section aboard the Space Shuttle Endeavour, targeted for launch in 2007.

Utilization survey of prototype structural test article

NASA Technical Reports Server (NTRS)

Baber, S.; Mcdaniel, H. M.; Berry, M. J.

1974-01-01

A survey was conducted of six aerospace companies and two NASA agencies to determine how prototype structural test articles are used in flight operations. The prototype structures are airframes and similar devices which are used for testing and generally are not flown. The survey indicated the following: (1) prototype test articles are not being discarded after development testing is complete, but are used for other purposes, (2) only two cases of prototypes being refurbished and flown were identified, (3) protective devices and inspection techniques are available to prevent or minimize test article damage, (4) substitute programs from design verification are availabel in lieu of using prototype structural articles, and (5) there is a trend away from dedicated test articles. Four options based on these study results were identified to reduce test and hardware costs without compromising reliability of the flight program.

Utilization of multimedia-based prototype system for patient electronic medical record.

PubMed

Chu, Yuan-Chia; Jian, Wen-Shan; Yen, Li-Po; Chang, Polun

2006-01-01

Taiwanese Department of Health (DOH) proposed the basic format template of electronic medical records (EMR), for the reference of healthcare institutions nationwide. It facilitates the establishment of EMR in healthcare institutions and the foundation of the sharing and exchange center of EMR. We use this basic content format template as the data exchange carrier, and build a Multimedia EMR prototype system by using web-based XML structured documents, which can thoroughly show the information needed by patients and healthcare institutions, offer Macromedia inverted exclamation markV Flash style viewer, provide people and institutions with the operation interface for downloading relevant medical record formats, and realize the dream that people can actually own their Multimedia EMR.

Advanced ASON prototyping research activities in China

NASA Astrophysics Data System (ADS)

Hu, WeiSheng; Jin, Yaohui; Guo, Wei; Su, Yikai; He, Hao; Sun, Weiqiang

2005-02-01

This paper provides an overview of prototyping research activities of automatically switched optical networks and transport networks (ASONs/ASTNs) in China. In recent years, China has recognized the importance and benefits of the emerging ASON/ASTN techniques. During the period of 2001 and 2002, the national 863 Program of China started the preliminary ASON research projects with the main objectives to build preliminary ASON testbeds, develop control plane protocols and test their performance in the testbeds. During the period of 2003 and 2004, the 863 program started ASTN prototyping equipment projects for more practical applications. Totally 12 ASTN equipments are being developed by three groups led by Chinese venders: ZTE with Beijing University of Posts and Telecommunications (BUPT), Wuhan Research Institute of Posts and Telecommunication (WRI) with Shanghai Jiao Tong University (SJTU), and Huawei Inc. Meanwhile, as the ASTN is maturing, some of the China"s carries are participating in the OIF"s World Interoperability Demonstration, carrying out ASTN test, or deploying ASTN backbone networks. Finally, several ASTN backbone networks being tested or deployed now will be operated by the carries in 2005. The 863 Program will carry out an ASTN field trail in Yangtse River Delta, and finally deploy the 3TNET. 3TNET stands for Tbps transmission, Tbps switching, and Tbps routing, as well as a network integrating the above techniques. A task force under the "863" program is responsible for ASTN equipment specifications and interoperation agreements, technical coordination among all the participants, schedule of the whole project during the project undergoing, and organization of internetworking of all the equipments in the laboratories and field trials.

Standardisation of the Japanese diet for use in animal experiments.

PubMed

Sugawara, Saeko; Mizowaki, Yui; Iwagaki, Yui; Sakamoto, Yu; Yamamoto, Kazushi; Tsuduki, Tsuyoshi

2017-11-01

The aim of this study was to develop a purified diet that mimics the characteristics of the Japanese diet using readily available materials with a simpler composition and a focus on quality, with the goal of facilitating performance of studies on the Japanese diet worldwide. The utility of the new diet was examined as a mimic of the standard Japanese diet for use in animal experiments. We examined whether a key characteristic of the Japanese diet of being less likely to cause obesity could be reproduced. The mimic diet had a balance of protein, fat and carbohydrate based on the 1975 Japanese diet, which is the least likely to cause obesity, and materials chosen with reference to the National Health and Nutrition Survey (NHNS). To examine similarities of the mimic diet with the model 1975 Japanese diet, we created a menu of the 1975 diet based on the NHNS and prepared the freeze-dried and powdered diet. The mimic diet, the 1975 Japanese diet, a control AIN-93G diet and a Western diet were fed to mice for 4 weeks. As a result, the mimic diet and the 1975 diet resulted in less accumulation of visceral fat and liver fat. Mice given these two diets showed similar effects. This indicates that the mimic diet used in this study has characteristics of the 1975 Japanese diet and could be used as a standard Japanese diet in animal experiments.

Comparison of performance-based measures among native Japanese, Japanese-Americans in Hawaii and Caucasian women in the United States, ages 65 years and over: a cross-sectional study

PubMed Central

Aoyagi, Kiyoshi; Ross, Philip D; Nevitt, Michael C; Davis, James W; Wasnich, Richard D; Hayashi, Takuo; Takemoto, Tai-ichiro

2001-01-01

Background Japanese (both in Japan and Hawaii) have a lower incidence of falls and of hip fracture than North American and European Caucasians, but the reasons for these differences are not clear. Subjects and Methods A cross-sectional study. We compared neuromuscular risk factors for falls using performance-based measures (chair stand time, usual and rapid walking speed, and grip strength) among 163 Japanese women in Japan, 681 Japanese-American women in Hawaii and 9403 Caucasian women in the United States aged 65 years and over. Results After adjusting for age, the Caucasian women required about 40% more time to complete 5 chair stands than either group of Japanese. Walking speed was about 10% slower among Caucasians than native Japanese, whereas Japanese-American women in Hawaii walked about 11% faster than native Japanese. Grip strength was greatest in Japan, which may reflect the rural farming district that this sample was drawn from. Additional adjustment for height, weight or body mass index increased the adjusted means of chair stand time and grip strength among Japanese, but the differences remained significant. Conclusions Both native Japanese and Japanese-American women in Hawaii performed better than Caucasians on chair stand time and walking speed tests, and native Japanese had greater grip strength than Japanese in Hawaii and Caucasians. The biological implications of these differences in performance are uncertain, but may be useful in planning future comparisons between populations. PMID:11696243

Prototyping and Simulation of Robot Group Intelligence using Kohonen Networks.

PubMed

Wang, Zhijun; Mirdamadi, Reza; Wang, Qing

2016-01-01

Intelligent agents such as robots can form ad hoc networks and replace human being in many dangerous scenarios such as a complicated disaster relief site. This project prototypes and builds a computer simulator to simulate robot kinetics, unsupervised learning using Kohonen networks, as well as group intelligence when an ad hoc network is formed. Each robot is modeled using an object with a simple set of attributes and methods that define its internal states and possible actions it may take under certain circumstances. As the result, simple, reliable, and affordable robots can be deployed to form the network. The simulator simulates a group of robots as an unsupervised learning unit and tests the learning results under scenarios with different complexities. The simulation results show that a group of robots could demonstrate highly collaborative behavior on a complex terrain. This study could potentially provide a software simulation platform for testing individual and group capability of robots before the design process and manufacturing of robots. Therefore, results of the project have the potential to reduce the cost and improve the efficiency of robot design and building.

Prototyping and Simulation of Robot Group Intelligence using Kohonen Networks

PubMed Central

Wang, Zhijun; Mirdamadi, Reza; Wang, Qing

2016-01-01

Intelligent agents such as robots can form ad hoc networks and replace human being in many dangerous scenarios such as a complicated disaster relief site. This project prototypes and builds a computer simulator to simulate robot kinetics, unsupervised learning using Kohonen networks, as well as group intelligence when an ad hoc network is formed. Each robot is modeled using an object with a simple set of attributes and methods that define its internal states and possible actions it may take under certain circumstances. As the result, simple, reliable, and affordable robots can be deployed to form the network. The simulator simulates a group of robots as an unsupervised learning unit and tests the learning results under scenarios with different complexities. The simulation results show that a group of robots could demonstrate highly collaborative behavior on a complex terrain. This study could potentially provide a software simulation platform for testing individual and group capability of robots before the design process and manufacturing of robots. Therefore, results of the project have the potential to reduce the cost and improve the efficiency of robot design and building. PMID:28540284

Microbolometer characterization with the electronics prototype of the IRCAM for the JEM-EUSO mission

NASA Astrophysics Data System (ADS)

Martín, Yolanda; Joven, Enrique; Reyes, Marcos; Licandro, Javier; Maroto, Oscar; Díez-Merino, Laura; Tomas, Albert; Carbonell, Jordi; Morales de los Ríos, J. A.; del Peral, Luis; Rodríguez-Frías, M. D.

2014-08-01

JEM-EUSO is a space observatory that will be attached to the Japanese module of the International Space Station (ISS) to observe the UV photon tracks produced by Ultra High Energy Cosmic Rays (UHECR) interacting with atmospheric nuclei. The observatory comprises an Atmospheric Monitoring System (AMS) to gather data about the status of the atmosphere, including an infrared camera (IRCAM) for cloud coverage and cloud top height detection. This paper describes the design and characterization tests of IRCAM, which is the responsibility of the Spanish JEM-EUSO Consortium. The core of IRCAM is a 640x480 microbolometer array, the ULIS 04171, sensitive to radiation in the range 7 to 14 microns. The microbolometer array has been tested using the Front End Electronics Prototype (FEEP). This custom designed electronics corresponds to the Breadboard Model, a design built to verify the camera requirements in the laboratory. The FEEP controls the configuration of the microbolometer, digitizes the detector output, sends data to the Instrument Control Unit (ICU), and controls the microbolometer temperature to a 10 mK stability. Furthermore, the FEEP allows IRCAM to preprocess images by the addition of a powerful FPGA. This prototype has been characterized in the laboratories of Instituto de Astrofisica de Canarias (IAC). Main results, including detector response as a function of the scene temperature, NETD and Non-Uniformity Correction (NUC) are shown. Results about thermal resolution meet the system requirements with a NETD lower than 1K including the narrow band filters which allow us to retrieve the clouds temperature using stereovision algorithms.

Subarashii: Encounters in Japanese Spoken Language Education.

ERIC Educational Resources Information Center

Bernstein, Jared; Najmi, Amir; Ehsani, Farzad

1999-01-01

Describes Subarashii, an experimental computer-based interactive spoken-language education system designed to understand what a student is saying in Japanese and respond in a meaningful way in spoken Japanese. Implementation of a preprototype version of the Subarashii system identified strengths and limitations of continuous speech recognition…

Connective Choice between Native and Japanese Speakers.

ERIC Educational Resources Information Center

Tabuki, Masatoshi; Shimatani, Hiroshi

A study investigated the use of connectors in English conversation between native Japanese-speakers and teachers outside the classroom. Data were drawn from six videotaped conversations between pairs of Japanese students, all learning beginning-level English, with conversational support provided by English teachers. The functions of four…

Japanese Educational Patterns in Science and Engineering

ERIC Educational Resources Information Center

Birnbaum, Henry

1973-01-01

Describes the Japanese educational system, and outlines some of the obstacles faced by students in progressing through successive levels from elementary school to university. Emphasizes undergraduate education, especially in science and engineering. The organization of the Japanese school system is schematically presented in a diagram. (JR)

Environmental performance of green building code and certification systems.

PubMed

Suh, Sangwon; Tomar, Shivira; Leighton, Matthew; Kneifel, Joshua

2014-01-01

We examined the potential life-cycle environmental impact reduction of three green building code and certification (GBCC) systems: LEED, ASHRAE 189.1, and IgCC. A recently completed whole-building life cycle assessment (LCA) database of NIST was applied to a prototype building model specification by NREL. TRACI 2.0 of EPA was used for life cycle impact assessment (LCIA). The results showed that the baseline building model generates about 18 thousand metric tons CO2-equiv. of greenhouse gases (GHGs) and consumes 6 terajoule (TJ) of primary energy and 328 million liter of water over its life-cycle. Overall, GBCC-compliant building models generated 0% to 25% less environmental impacts than the baseline case (average 14% reduction). The largest reductions were associated with acidification (25%), human health-respiratory (24%), and global warming (GW) (22%), while no reductions were observed for ozone layer depletion (OD) and land use (LU). The performances of the three GBCC-compliant building models measured in life-cycle impact reduction were comparable. A sensitivity analysis showed that the comparative results were reasonably robust, although some results were relatively sensitive to the behavioral parameters, including employee transportation and purchased electricity during the occupancy phase (average sensitivity coefficients 0.26-0.29).

Comparison of the evapotranspiration and its components before and after thinning in Japanese cedar and Japanese cypress forest

NASA Astrophysics Data System (ADS)

Tateishi, Makiko; Xiang, Yang; Matsuda, Hiroki; Saito, Takami; Sun, Haotian; Otsuki, Kyoichi; Kasahara, Tamao; Onda, Yuichi

2014-05-01

Water source area of Japan is often covered by forest, and 40 % of forest cover is coniferous plantation. Thinning has become a major tool in the management of plantation in recent years, but its effects on water cycle and its components are yet to be evaluated well. In this study, we investigated the changes in evapotranspiration and its components, including stand transpiration and canopy interception loss, after thinning in 50 years old Japanese cedar and Japanese cypress plantation at Yayama experimental catchment in Fukuoka, Japan. We established study plot in each Japanese cedar and Japanese cypress stand. Sap flow measurement was conducted for evaluating stand transpiration in each plot. Through fall and stem flow were also monitored to estimate canopy interception loss. The experiments were conducted over two years. During the measurements, 50 % of trees were thinned randomly in entire catchment, which has an area of 2.98 ha. Stem density was changed from 3945 to 1977 trees per ha after thinning. The reduction of daily stand transpiration in the studied Japanese cedar and cypress stands after thinning were 31.6 % and 48.2 % under the same condition of microclimate, respectively. These values were comparable to the changes in total sapwood area, 34.2 % and 44.5 %, and sap flow density did not change after thinning. It implies that sapwood area is a primary determinant of stand transpiration. Canopy interception ratios were 27 % and 26 % for Japanese cedar and cypress before thinning, and the ratios decreased to 24 % and 21 % after thinning, respectively. Thus, we obtained the changes in annual evapotranspiration and its components at catchment scale by using observation and models. The changes in partitioning of evapotranspiration is also discussed. The evapotranspiration before and after thinning were also compared to water balance data in this study site.

16 CFR 1633.5 - Prototype pooling and confirmation testing requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Prototype pooling and confirmation testing... Prototype pooling and confirmation testing requirements. (a) Prototype pooling. One or more manufacturers may rely on a qualified prototype produced by another manufacturer or prototype developer provided...

Bilingual Dual Coding in Japanese Returnee Students.

ERIC Educational Resources Information Center

Taura, Hideyuki

1998-01-01

Investigates effects of second-language acquisition age, length of exposure to the second language, and Japanese language specificity on the bilingual dual coding hypothesis proposed by Paivio and Desrochers (1980). Balanced Japanese-English bilingual returnee (having resided in an English-speaking country) subjects were presented with pictures to…

Genetic researches on growth traits of Japanese quail

NASA Astrophysics Data System (ADS)

Atalay, Sertaç

2017-04-01

The main objective of the poultry industry is to increase genetic capacity of animals. Growth is one of the most important economic trait in poultry production. Thus, to obtain genetically superior animals related to growth traits is one of the most important issues of poultry breeding programs. Japanese quail is one of the most productive animals in poultry species. Although Japanese quail is small body size, It has high meat and egg production yield. Japanese quail has also important breeding advantages such as short time generation interval, capacity to have a great number of birds per unit area, great reproductive performance, high resistance to diseases and low breeding cost. Therefore, Japanese quail has great advantages for genetic researches and can be used as model animal for major poultry species.

Korean speech sound development in children from bilingual Japanese-Korean environments

PubMed Central

Kim, Jeoung Suk; Lee, Jun Ho; Choi, Yoon Mi; Kim, Hyun Gi; Kim, Sung Hwan; Lee, Min Kyung

2010-01-01

Purpose This study investigates Korean speech sound development, including articulatory error patterns, among the Japanese-Korean children whose mothers are Japanese immigrants to Korea. Methods The subjects were 28 Japanese-Korean children with normal development born to Japanese women immigrants who lived in Jeonbuk province, Korea. They were assessed through Computerized Speech Lab 4500. The control group consisted of 15 Korean children who lived in the same area. Results The values of the voice onset time of consonants /ph/, /t/, /th/, and /k*/ among the children were prolonged. The children replaced the lenis sounds with aspirated or fortis sounds rather than replacing the fortis sounds with lenis or aspirated sounds, which are typical among Japanese immigrants. The children showed numerous articulatory errors for /c/ and /l/ sounds (similar to Koreans) rather than errors on /p/ sounds, which are more frequent among Japanese immigrants. The vowel formants of the children showed a significantly prolonged vowel /o/ as compared to that of Korean children (P<0.05). The Japanese immigrants and their children showed a similar substitution /n/ for /ɧ/ [Japanese immigrants (62.5%) vs Japanese-Korean children (14.3%)], which is rarely seen among Koreans. Conclusion The findings suggest that Korean speech sound development among Japanese-Korean children is influenced not only by the Korean language environment but also by their maternal language. Therefore, appropriate language education programs may be warranted not only or immigrant women but also for their children. PMID:21189968

Communication attitudes of Japanese school-age children who stutter.

PubMed

Kawai, Norimune; Healey, E Charles; Nagasawa, Taiko; Vanryckeghem, Martine

2012-01-01

Past research with the Communication Attitude Test (CAT) has shown it to be a valid and reliable instrument for assessing speech-associated attitude of children who stutter (CWS). However, in Japan, the CAT has not been used extensively to examine the communication attitude of CWS. The purpose of this study was to determine if a Japanese version of the CAT could differentiate between the communication attitude of Japanese elementary school CWS and children who do not stutter (CWNS). A Japanese translation of the 1991 version of the Communication Attitude Test-Revised (CAT-R) was used in this study. Eighty Japanese CWS and 80 gender- and grade level-matched CWNS participated in the study. The results showed that CWS had a significantly more negative communication attitude than CWNS. Both CWS and CWNS in 1st grade showed significantly more positive communication attitudes than children in 2nd, 3rd, 4th, 5th, and 6th grades. Furthermore, a link between stuttering severity and CWS' communication attitude was found. Additional research is needed to confirm the results of the current study, which indicate that the communication attitude of Japanese CWS becomes more negative as they get older. The reader will be able to: (1) Describe the process that was used to develop a Japanese version of the Communication Attitude Test (CAT-J). (2) Discuss attitude differences between Japanese children who stutter and those who do not and how grade level impacts a negative attitude toward communication. (3) Explain the link between stuttering severity and attitudes of Japanese children who stutter. Copyright © 2012 Elsevier Inc. All rights reserved.

Japanese Encephalitis Virus in Meningitis Patients, Japan

PubMed Central

Ito, Mikako; Takao, Shinichi; Shimazu, Yukie; Fukuda, Shinji; Miyazaki, Kazuo; Kurane, Ichiro; Takasaki, Tomohiko

2005-01-01

Cerebrospinal fluid specimens from 57 patients diagnosed with meningitis were tested for Japanese encephalitis virus. Total RNA was extracted from the specimens and amplified. Two products had highest homology with Nakayama strain and 2 with Ishikawa strain. Results suggest that Japanese encephalitis virus causes some aseptic meningitis in Japan. PMID:15757569

Argumentative Strategies in American and Japanese English.

ERIC Educational Resources Information Center

Kamimura, Taeko; Oi, Kyoko

1998-01-01

A study examined differences in argumentative strategies in Japanese and American English by analyzing English essays on capital punishment written by 22 American high school seniors and 30 Japanese college sophomores. Differences were found in the organizational patterns, content and use of rational appeals, preference for type of diction, and…

A MANUAL OF JAPANESE WRITING, BOOK 1.

ERIC Educational Resources Information Center

CHAPLIN, HAMAKO ITO; MARTIN, SAMUEL E.

THIS IS THE FIRST OF THREE VOLUMES WRITTEN TO TEACH THE 881 ESSENTIAL OR "EDUCATION" CHARACTERS TO ENGLISH-SPEAKING STUDENTS OF JAPANESE. THE AUTHORS ASSUME THAT THE STUDENTS HAVE ALREADY LEARNED THE HIRAGANA AND KATAKANA SYLLABARIES AND HAVE A BASIC KNOWLEDGE OF JAPANESE GRAMMAR. ORTHOGRAPHIC CONVENTIONS USED FOLLOW CLOSELY THOSE…

Prototyping with AIDA for a hospital pharmacy system.

PubMed

Molenaar, G C; Boon, W M

1987-01-01

The CENTRASYS system for the Hospital Pharmacy, developed as part of a research project of the Department of Medical Informatics is described. The role of AIDA, a fourth-generation software package, as a prototyping tool is discussed. It is concluded that AIDA facilitates prototyping and is also very suitable as a vehicle for systems in operation. It is further concluded that prototyping is of great help in the developmental phase of a project, but that great care has to be taken during evaluation of the prototypes: minimize the number of test sites and try to avoid that users become dependent on the system, because every prototype needs further tuning before it really becomes an operational system.

Prototype design based on NX subdivision modeling application

NASA Astrophysics Data System (ADS)

Zhan, Xianghui; Li, Xiaoda

2018-04-01

Prototype design is an important part of the product design, through a quick and easy way to draw a three-dimensional product prototype. Combined with the actual production, the prototype could be modified several times, resulting in a highly efficient and reasonable design before the formal design. Subdivision modeling is a common method of modeling product prototypes. Through Subdivision modeling, people can in a short time with a simple operation to get the product prototype of the three-dimensional model. This paper discusses the operation method of Subdivision modeling for geometry. Take a vacuum cleaner as an example, the NX Subdivision modeling functions are applied. Finally, the development of Subdivision modeling is forecasted.

Software Prototyping: Designing Systems for Users.

ERIC Educational Resources Information Center

Spies, Phyllis Bova

1983-01-01

Reports on major change in computer software development process--the prototype model, i.e., implementation of skeletal system that is enhanced during interaction with users. Expensive and unreliable software, software design errors, traditional development approach, resources required for prototyping, success stories, and systems designer's role…

[Rapid prototyping: a very promising method].

PubMed

Haverman, T M; Karagozoglu, K H; Prins, H-J; Schulten, E A J M; Forouzanfar, T

2013-03-01

Rapid prototyping is a method which makes it possible to produce a three-dimensional model based on two-dimensional imaging. Various rapid prototyping methods are available for modelling, such as stereolithography, selective laser sintering, direct laser metal sintering, two-photon polymerization, laminated object manufacturing, three-dimensional printing, three-dimensional plotting, polyjet inkjet technology,fused deposition modelling, vacuum casting and milling. The various methods currently being used in the biomedical sector differ in production, materials and properties of the three-dimensional model which is produced. Rapid prototyping is mainly usedforpreoperative planning, simulation, education, and research into and development of bioengineering possibilities.

Travel-related health problems in Japanese travelers.

PubMed

Mizuno, Yasutaka; Kudo, Koichiro

2009-09-01

Although the number of Japanese individuals traveling abroad has increased steadily, reaching approximately 17.3 million in 2007, the incidence of various travel-related health problems in Japan remains unknown. The travel-related health problems of Japanese travelers returning to Japan from abroad are analyzed by assessing the records. Data were collected retrospectively on returning travelers who visited the authors' travel clinic during the period from January 2005 through to December 2006 with any health problem acquired overseas. A total of 345 patients were included in this study (200 male, 145 female; average age, 34+/-12.3 years). Reasons for travel included leisure (45.8%); business (39.1%); visiting friends and relatives or accompanying other travelers (8.7%); volunteering (3.8%); and long stays in order to study or live (2.6%). The most visited destination was Asia (n=260), followed by Africa (n=105). The most commonly reported health problems were gastro-intestinal infections (39.1%), followed by respiratory tract infections (16.2%), animal bites (8.1%), and skin problems (5.8%). Together, malaria and dengue accounted for 10% of diagnoses in 125 febrile patients (36.2%). Although the profile of travel-related health problems in Japanese travelers is similar to that of Western travelers, the characteristics of travel were quite different. Therefore Japanese travel advice should be tailored to suit the Japanese traveler.

Prototyping for surgical and prosthetic treatment.

PubMed

Goiato, Marcelo Coelho; Santos, Murillo Rezende; Pesqueira, Aldiéris Alves; Moreno, Amália; dos Santos, Daniela Micheline; Haddad, Marcela Filié

2011-05-01

Techniques of rapid prototyping were introduced in the 1980s in the field of engineering for the fabrication of a solid model based on a computed file. After its introduction in the biomedical field, several applications were raised for the fabrication of models to ease surgical planning and simulation in implantology, neurosurgery, and orthopedics, as well as for the fabrication of maxillofacial prostheses. Hence, the literature has described the evolution of rapid prototyping technique in health care, which allowed easier technique, improved surgical results, and fabrication of maxillofacial prostheses. Accordingly, a literature review on MEDLINE (PubMed) database was conducted using the keywords rapid prototyping, surgical planning, and maxillofacial prostheses and based on articles published from 1981 to 2010. After reading the titles and abstracts of the articles, 50 studies were selected owing to their correlations with the aim of the current study. Several studies show that the prototypes have been used in different dental-medical areas such as maxillofacial and craniofacial surgery; implantology; neurosurgery; orthopedics; scaffolds of ceramic, polymeric, and metallic materials; and fabrication of personalized maxillofacial prostheses. Therefore, prototyping has been an indispensable tool in several studies and helpful for surgical planning and fabrication of prostheses and implants.

Harnessing Furigana to Improve Japanese Learners' Ability to Read Kanji

ERIC Educational Resources Information Center

Kirwan, Leigh

2005-01-01

The historical development of written Japanese has resulted in an extremely complex system. Modern Japanese is usually written in logosyllabic script consisting of a combination of "kanji," the Chinese characters, and "kana," the Japanese syllables originally formed from them. There are two types of "kana," the…

Habitat Demonstration Unit Project: Leadership and Management Strategies for a Rapid Prototyping Project

NASA Technical Reports Server (NTRS)

Kennedy, Kriss J.; Toup, Larry; Gill, Tracy; Tri, Terry; Howe, Scott; Smitherman, David

2011-01-01

This paper gives an overview of the National Aeronautics and Space Administration (NASA) led multi-center Habitat Demonstration Unit (HDU) project leadership and management strategies being used by the NASA HDU team for a rapid prototyping project. The HDU project team constructed and tested an analog prototype lunar surface habitat/laboratory called the Pressurized Excursion Module (PEM) during 2010. The prototype unit subsystems were integrated in a short amount of time, utilizing a tiger team rapid prototyping approach that brought together over 20 habitation-related technologies and innovations from a variety of NASA centers. This paper describes the leadership and management strategies as well as lessons learned pertaining to leading and managing a multi-center diverse team in a rapid prototype environment. The PEM configuration went from a paper design to an operational surface habitat demonstration unit in less than 12 months. The HDU project is part of the strategic plan from the Exploration Systems Mission Directorate (ESMD) Directorate Integration Office (DIO) and the Exploration Mission Systems Office (EMSO) to test destination elements in analog environments. The 2011 HDU-Deep Space Habitat (DSH) configuration will build upon the PEM work, and emphasize validity of crew operations (remote working and living), EVA operations, mission operations, logistics operations, and science operations that might be required in a deep space context for Near Earth Object (NEO) exploration mission architectures. The 2011 HDU-DSH will be field-tested during the 2011 Desert Research and Technologies Studies (DRaTS) field tests. The HDU project is a "technology-pull" project that integrates technologies and innovations from multiple NASA centers. This project will repurpose the HDU 2010 demo unit that was field tested in the 2010 DRaTS, adding habitation functionality to the prototype unit. This paper will describe the strategy of establishing a multi-center project

Other Japanese Educations and Japanese Education Otherwise. Review Essay

ERIC Educational Resources Information Center

Takayama, Keita

2011-01-01

Education in the United States was in a state of "crisis" at the time of the 1983 release of "A Nation at Risk," the landmark report on the US education reform. This was the time when the rising Japanese economy started threatening the post-war US economic dominance and conservative figures such as Ronald Reagan gained popular…

The Stroop effect in English-Japanese bilinguals: the effect of phonological similarity.

PubMed

Sumiya, Hiromi; Healy, Alice F

2008-01-01

English-Japanese bilinguals performed a Stroop color-word interference task with both English and Japanese stimuli and responded in both English and Japanese. The Japanese stimuli were either the traditional color terms (TCTs) written in Hiragana or loanwords (LWs) from English written in Katakana. Both within-language and between-language interference were found for all combinations of stimuli and responses. The between-language interference was larger for Katakana LWs (phonologically similar to English) than for Hiragana TCTs, especially with Japanese responses. The magnitude of this phonological effect increased with self-rated reading fluency in Japanese. Overall responding was slower and the Stroop effect larger with English than with Japanese stimuli. These results suggest that unintentional lexical access elicits automatic phonological processing even with intermediate-level reading proficiency.

7 CFR 301.48-6 - Movement of live Japanese beetles.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 5 2014-01-01 2014-01-01 false Movement of live Japanese beetles. 301.48-6 Section... INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE DOMESTIC QUARANTINE NOTICES Japanese Beetle Quarantine and Regulations § 301.48-6 Movement of live Japanese beetles. Regulations requiring a permit for and otherwise...

7 CFR 301.48-6 - Movement of live Japanese beetles.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 5 2013-01-01 2013-01-01 false Movement of live Japanese beetles. 301.48-6 Section... INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE DOMESTIC QUARANTINE NOTICES Japanese Beetle Quarantine and Regulations § 301.48-6 Movement of live Japanese beetles. Regulations requiring a permit for and otherwise...

7 CFR 301.48-6 - Movement of live Japanese beetles.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 5 2010-01-01 2010-01-01 false Movement of live Japanese beetles. 301.48-6 Section... INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE DOMESTIC QUARANTINE NOTICES Japanese Beetle Quarantine and Regulations § 301.48-6 Movement of live Japanese beetles. Regulations requiring a permit for and otherwise...

Network Structure and Community Evolution on Twitter: Human Behavior Change in Response to the 2011 Japanese Earthquake and Tsunami

PubMed Central

Lu, Xin; Brelsford, Christa

2014-01-01

To investigate the dynamics of social networks and the formation and evolution of online communities in response to extreme events, we collected three datasets from Twitter shortly before and after the 2011 earthquake and tsunami in Japan. We find that while almost all users increased their online activity after the earthquake, Japanese speakers, who are assumed to be more directly affected by the event, expanded the network of people they interact with to a much higher degree than English speakers or the global average. By investigating the evolution of communities, we find that the behavior of joining or quitting a community is far from random: users tend to stay in their current status and are less likely to join new communities from solitary or shift to other communities from their current community. While non-Japanese speakers did not change their conversation topics significantly after the earthquake, nearly all Japanese users changed their conversations to earthquake-related content. This study builds a systematic framework for investigating human behaviors under extreme events with online social network data and our findings on the dynamics of networks and communities may provide useful insight for understanding how patterns of social interaction are influenced by extreme events. PMID:25346468

Network Structure and Community Evolution on Twitter: Human Behavior Change in Response to the 2011 Japanese Earthquake and Tsunami

NASA Astrophysics Data System (ADS)

Lu, Xin; Brelsford, Christa

2014-10-01

To investigate the dynamics of social networks and the formation and evolution of online communities in response to extreme events, we collected three datasets from Twitter shortly before and after the 2011 earthquake and tsunami in Japan. We find that while almost all users increased their online activity after the earthquake, Japanese speakers, who are assumed to be more directly affected by the event, expanded the network of people they interact with to a much higher degree than English speakers or the global average. By investigating the evolution of communities, we find that the behavior of joining or quitting a community is far from random: users tend to stay in their current status and are less likely to join new communities from solitary or shift to other communities from their current community. While non-Japanese speakers did not change their conversation topics significantly after the earthquake, nearly all Japanese users changed their conversations to earthquake-related content. This study builds a systematic framework for investigating human behaviors under extreme events with online social network data and our findings on the dynamics of networks and communities may provide useful insight for understanding how patterns of social interaction are influenced by extreme events.

Development of a prototype multi-processing interactive software invocation system

NASA Technical Reports Server (NTRS)

Berman, W. J.

1983-01-01

The Interactive Software Invocation System (NASA-ISIS) was first transported to the M68000 microcomputer, and then rewritten in the programming language Path Pascal. Path Pascal is a significantly enhanced derivative of Pascal, allowing concurrent algorithms to be expressed using the simple and elegant concept of Path Expressions. The primary results of this contract was to verify the viability of Path Pascal as a system's development language. The NASA-ISIS implementation using Path Pascal is a prototype of a large, interactive system in Path Pascal. As such, it is an excellent demonstration of the feasibility of using Path Pascal to write even more extensive systems. It is hoped that future efforts will build upon this research and, ultimately, that a full Path Pascal/ISIS Operating System (PPIOS) might be developed.

The Japanese value of harmony and nursing ethics.

PubMed

Konishi, Emiko; Yahiro, Michiko; Nakajima, Naoko; Ono, Miki

2009-09-01

Harmony is one of the most fundamental Japanese values. It is derived from Confucianism and encompasses a state of mind, an action process and outcomes of the action. This article draws on research data and discusses Japanese nurses' perceptions of harmony as reflected in their everyday practice. The most important virtues for these nurses were reported as politeness and respect for other persons. The outcome from the nurses' harmonious practice, it is claimed, benefited patients and created peaceful, harmonious relationships for all. Because of the unique link between harmony and the location of interaction, the ideal 'workplace harmony' threatened some nurses' professional decision making. These nurses confused harmony with conformity by superficial agreement. The Japanese seniority system could be a major factor contributing to this problem. Ethics education that includes traditional values and concepts in Japanese culture is strongly urged.

Leveraging the Unified Access Framework: A Tale of an Integrated Ocean Data Prototype

NASA Astrophysics Data System (ADS)

O'Brien, K.; Kern, K.; Smith, B.; Schweitzer, R.; Simons, R.; Mendelssohn, R.; Diggs, S. C.; Belbeoch, M.; Hankin, S.

2014-12-01

The Tropical Pacific Observing System (TPOS) has been functioning and capturing measurements since the mid 1990s during the very successful Tropical Ocean Global Atmosphere (TOGA) project. Unfortunately, in the current environment, some 20 years after the end of the TOGA project, sustaining the observing system is proving difficult. With the many advances in methods of observing the ocean, a group of scientists is taking a fresh look at what the Tropical Pacific Observing System requires for sustainability. This includes utilizing a wide variety of observing system platforms, including Argo floats, unmanned drifters, moorings, ships, etc. This variety of platforms measuring ocean data also provides a significant challenge in terms of integrated data management. It is recognized that data and information management is crucial to the success and impact of any observing system. In order to be successful, it is also crucial to avoid building stovepipes for data management. To that end, NOAA's Observing System Monitoring Center (OSMC) has been tasked to create a testbed of integrated real time and delayed mode observations for the Tropical Pacific region in support of the TPOS. The observing networks included in the prototype are: Argo floats, OceanSites moorings, drifting buoys, hydrographic surveys, underway carbon observations and, of course, real time ocean measurements. In this presentation, we will discuss how the OSMC project is building the integrated data prototype using existing free and open source software. We will explore how we are leveraging successful data management frameworks pioneered by efforts such as NOAA's Unified Access Framework project. We will also show examples of how conforming to well known conventions and standards allows for discoverability, usability and interoperability of data.

The Art of Japanese Masks and Kimonos

ERIC Educational Resources Information Center

Brooks, Nancy Johnston

2009-01-01

Japanese masks have been worn for a number of reasons. In the past they were often used in plays and celebrations. Today in Japan, social masks are essential in many party gatherings as a form of expressing one's personality. In this article, the author describes an art project wherein students created Japanese masks and kimonos.

Smart Building: Decision Making Architecture for Thermal Energy Management

PubMed Central

Hernández Uribe, Oscar; San Martin, Juan Pablo; Garcia-Alegre, María C.; Santos, Matilde; Guinea, Domingo

2015-01-01

Smart applications of the Internet of Things are improving the performance of buildings, reducing energy demand. Local and smart networks, soft computing methodologies, machine intelligence algorithms and pervasive sensors are some of the basics of energy optimization strategies developed for the benefit of environmental sustainability and user comfort. This work presents a distributed sensor-processor-communication decision-making architecture to improve the acquisition, storage and transfer of thermal energy in buildings. The developed system is implemented in a near Zero-Energy Building (nZEB) prototype equipped with a built-in thermal solar collector, where optical properties are analysed; a low enthalpy geothermal accumulation system, segmented in different temperature zones; and an envelope that includes a dynamic thermal barrier. An intelligent control of this dynamic thermal barrier is applied to reduce the thermal energy demand (heating and cooling) caused by daily and seasonal weather variations. Simulations and experimental results are presented to highlight the nZEB thermal energy reduction. PMID:26528978

Smart Building: Decision Making Architecture for Thermal Energy Management.

PubMed

Uribe, Oscar Hernández; Martin, Juan Pablo San; Garcia-Alegre, María C; Santos, Matilde; Guinea, Domingo

2015-10-30

Smart applications of the Internet of Things are improving the performance of buildings, reducing energy demand. Local and smart networks, soft computing methodologies, machine intelligence algorithms and pervasive sensors are some of the basics of energy optimization strategies developed for the benefit of environmental sustainability and user comfort. This work presents a distributed sensor-processor-communication decision-making architecture to improve the acquisition, storage and transfer of thermal energy in buildings. The developed system is implemented in a near Zero-Energy Building (nZEB) prototype equipped with a built-in thermal solar collector, where optical properties are analysed; a low enthalpy geothermal accumulation system, segmented in different temperature zones; and an envelope that includes a dynamic thermal barrier. An intelligent control of this dynamic thermal barrier is applied to reduce the thermal energy demand (heating and cooling) caused by daily and seasonal weather variations. Simulations and experimental results are presented to highlight the nZEB thermal energy reduction.

Distinctive Features of Japanese Education. NIER Occasional Paper 01/91.

ERIC Educational Resources Information Center

National Inst. for Educational Research, Tokyo (Japan).

For the past decade there has been a surge of international interest in Japanese education in the wake of its economic and technological successes. This paper discusses eight distinctive features of Japanese education, identifying their advantages and disadvantages and how they have been brought about. These eight features of Japanese schooling…

Laboratory prototype flash evaporator

NASA Technical Reports Server (NTRS)

Gaddis, J. L.

1972-01-01

A laboratory prototype flash evaporator that is being developed as a candidate for the space shuttle environmental control system expendable heat sink is described. The single evaporator configuration uses water as an evaporant to accommodate reentry and on-orbit peak heat loads, and Freon 22 for terrestrial flight phases below 120,000 feet altitude. The design features, fabrication techniques used for the prototype unit, redundancy considerations, and the fluid temperature control arrangement are reported in detail. The results of an extensive test program to determine the evaporator operational characteristics under a wide variety of conditions are presented.

Der Begriff des "Ki" und die japanische Padagogik: Uber Konflikte zwischen westlicher und japanischer Padagogik (The Concept of "Ki" and Japanese Pedagogy: On Conflicts between Western and Japanese Pedagogics).

ERIC Educational Resources Information Center

Fujikawa, Nobuo

1997-01-01

Sketches the characteristics of the Japanese educational tradition and analyzes conflicts between modern western pedagogies and traditional education. Argues that Japanese socialization processes stress a specifically Japanese construction of the "self" and of behavior. Concludes that Japanese educators should be more aware of this…

Paleolithic Contingent in Modern Japanese: Estimation and Inference using Genome-wide Data

PubMed Central

He, Yungang; Wang, Wei R.; Xu, Shuhua; Jin, Li; SNP Consortium, Pan-Asia

2012-01-01

The genetic origins of Japanese populations have been controversial. Upper Paleolithic Japanese, i.e. Jomon, developed independently in Japanese islands for more than 10,000 years until the isolation was ended with the influxes of continental immigrants about 2,000 years ago. However, the knowledge of origin of Jomon and its contribution to the genetic pool of contemporary Japanese is still limited, albeit the extensive studies using mtDNA and Y chromosomes. In this report, we aimed to infer the origin of Jomon and to estimate its contribution to Japanese by fitting an admixture model with missing data from Jomon to a genome-wide data from 94 worldwide populations. Our results showed that the genetic contributions of Jomon, the Paleolithic contingent in Japanese, are 54.3∼62.3% in Ryukyuans and 23.1∼39.5% in mainland Japanese, respectively. Utilizing inferred allele frequencies of the Jomon population, we further showed the Paleolithic contingent in Japanese had a Northeast Asia origin. PMID:22482036

Chapter 4 - The LANDFIRE Prototype Project reference database

Treesearch

John F. Caratti

2006-01-01

This chapter describes the data compilation process for the Landscape Fire and Resource Management Planning Tools Prototype Project (LANDFIRE Prototype Project) reference database (LFRDB) and explains the reference data applications for LANDFIRE Prototype maps and models. The reference database formed the foundation for all LANDFIRE tasks. All products generated by the...

A prototype analysis of forgiveness.

PubMed

Kearns, Jill N; Fincham, Frank D

2004-07-01

Many definitions of forgiveness currently exist in the literature. The current research adds to this discussion by utilizing a prototype approach to examine lay conceptions of forgiveness. A prototype approach involves categorizing objects or events in terms of their similarity to a good example, whereas a classical approach requires that there are essential elements that must be present. In Study 1, participants listed the features of forgiveness. Study 2 obtained centrality ratings for these features. In Studies 3 and 4, central features were found to be more salient in memory than peripheral features. Study 5 showed that feature centrality influenced participants' ratings of victims involved in hypothetical transgressions. Thus, the two criteria for demonstrating prototype structure (that participants find it meaningful to judge features in terms of their centrality and that centrality affects cognition) were met.

Flight Telerobotic Servicer prototype simulator

NASA Astrophysics Data System (ADS)

Schein, Rob; Krauze, Linda; Hartley, Craig; Dickenson, Alan; Lavecchia, Tom; Working, Bob

A prototype simulator for the Flight Telerobotic Servicer (FTS) system is described for use in the design development of the FTS, emphasizing the hand controller and user interface. The simulator utilizes a graphics workstation based on rapid prototyping tools for systems analyses of the use of the user interface and the hand controller. Kinematic modeling, manipulator-control algorithms, and communications programs are contained in the software for the simulator. The hardwired FTS panels and operator interface for use on the STS Orbiter are represented graphically, and the simulated controls function as the final FTS system configuration does. The robotic arm moves based on the user hand-controller interface, and the joint angles and other data are given on the prototype of the user interface. This graphics simulation tool provides the means for familiarizing crewmembers with the FTS system operation, displays, and controls.

Center for Japanese Study Abroad. Fastback 386.

ERIC Educational Resources Information Center

Jassey, William

The Center for Japanese Study Abroad (CJSA) is a Japanese immersion and study abroad program implemented as a magnet program at inner-city Brien MacMahon High School in Norwalk, Connecticut. The program is supported by a grant from the state department of education. Attended by 60-70 students from high schools in southern Fairfield County…

Classroom Silence: Voices from Japanese EFL Learners

ERIC Educational Resources Information Center

Harumi, Seiko

2011-01-01

This article explores Japanese EFL learners' classroom silence in a Japanese EFL context. The existence of silence in second language learning contexts can be a source of conflict between students and teachers and even among students themselves. It can also be an obstacle to acquiring the target language. In order to tackle this problem and to…

Underground Prototype Water Cherenkov Muon Detector with the Tibet Air Shower Array

DOE Office of Scientific and Technical Information (OSTI.GOV)

Amenomori, M.; Nanjo, H.; Bi, X. J.

2008-12-24

We are planning to build a 10,000 m{sup 2} water-Cherenkov-type muon detector (MD) array under the Tibet air shower (AS) array. The Tibet AS+MD array will have the sensitivity to detect gamma rays in the 100 TeV region by an order of the magnitude better than any other previous existing detectors in the world. In the late fall of 2007, a prototype water Cherenkov muon detector of approximately 100 m{sup 2} was constructed under the existing Tibet AS array. The preliminary data analysis is in good agreement with our MC simulation. We are now ready for further expanding the undergroundmore » water Cherenkov muon detector.« less

Validation of the Japanese disease severity classification and the GAP model in Japanese patients with idiopathic pulmonary fibrosis.

PubMed

Kondoh, Shun; Chiba, Hirofumi; Nishikiori, Hirotaka; Umeda, Yasuaki; Kuronuma, Koji; Otsuka, Mitsuo; Yamada, Gen; Ohnishi, Hirofumi; Mori, Mitsuru; Kondoh, Yasuhiro; Taniguchi, Hiroyuki; Homma, Sakae; Takahashi, Hiroki

2016-09-01

The clinical course of idiopathic pulmonary fibrosis (IPF) shows great inter-individual differences. It is important to standardize the severity classification to accurately evaluate each patient׳s prognosis. In Japan, an original severity classification (the Japanese disease severity classification, JSC) is used. In the United States, the new multidimensional index and staging system (the GAP model) has been proposed. The objective of this study was to evaluate the model performance for the prediction of mortality risk of the JSC and GAP models using a large cohort of Japanese patients with IPF. This is a retrospective cohort study including 326 patients with IPF in the Hokkaido prefecture from 2003 to 2007. We obtained the survival curves of each stage of the GAP and JSC models to perform a comparison. In the GAP model, the prognostic value for mortality risk of Japanese patients was also evaluated. In the JSC, patient prognoses were roughly divided into two groups, mild cases (Stages I and II) and severe cases (Stages III and IV). In the GAP model, there was no significant difference in survival between Stages II and III, and the mortality rates in the patients classified into the GAP Stages I and II were underestimated. It is difficult to predict accurate prognosis of IPF using the JSC and the GAP models. A re-examination of the variables from the two models is required, as well as an evaluation of the prognostic value to revise the severity classification for Japanese patients with IPF. Copyright © 2016 The Japanese Respiratory Society. Published by Elsevier B.V. All rights reserved.

Kids Explore America's Japanese American Heritage. Westridge Young Writers Workshop.

ERIC Educational Resources Information Center

Jefferson County School District R-1, Denver, CO.

This book was written by 94 students, aged 8-14, at Westridge Elementary School (Littleton, Colorado) during a summer enrichment class. The book was written for anyone who wants to learn about Japanese-American culture and heritage. Chapter 1 gives an overview of Japanese history before American contact, the immigration of Japanese to America, the…

Low mitochondrial DNA diversity of Japanese Polled and Kuchinoshima feral cattle.

PubMed

Mannen, Hideyuki; Yonesaka, Riku; Noda, Aoi; Shimogiri, Takeshi; Oshima, Ichiro; Katahira, Kiyomi; Kanemaki, Misao; Kunieda, Tetsuo; Inayoshi, Yousuke; Mukai, Fumio; Sasazaki, Shinji

2017-05-01

This study aims to estimate the mitochondrial genetic diversity and structure of Japanese Polled and Kuchinoshima feral cattle, which are maintained in small populations. We determined the mitochondrial DMA (mtDNA) displacement loop (D-loop) sequences for both cattle populations and analyzed these in conjunction with previously published data from Northeast Asian cattle populations. Our findings showed that Japanese native cattle have a predominant, Asian-specific mtDNA haplogroup T4 with high frequencies (0.43-0.81). This excluded Kuchinoshima cattle (32 animals), which had only one mtDNA haplotype belonging to the haplogroup T3. Japanese Polled showed relatively lower mtDNA diversity in the average sequence divergence (0.0020) than other Wagyu breeds (0.0036-0.0047). Japanese Polled have been maintained in a limited area of Yamaguchi, and the population size is now less than 200. Therefore, low mtDNA diversity in the Japanese Polled could be explained by the decreasing population size in the last three decades. We found low mtDNA diversity in both Japanese Polled and Kuchinoshima cattle. The genetic information obtained in this study will be useful for maintaining these populations and for understanding the origin of Japanese native cattle. © 2016 Japanese Society of Animal Science.

COMPARING 3D FOOT SHAPE MODELS BETWEEN TAIWANESE AND JAPANESE FEMALES.

PubMed

Lee, Yu-Chi; Kouchi, Makiko; Mochimaru, Masaaki; Wang, Mao-Jiun

2015-06-01

This study compares foot shape and foot dimensions between Taiwanese and Japanese females. One hundred Taiwanese and 100 Japanese female 3D foot scanning data were used for comparison. To avoid the allometry effect, data from 23 Taiwanese and 19 Japanese with foot length between 233 to 237 mm were used for shape comparison. Homologous models created for the right feet of the 42 subjects were analyzed by Multidimensional Scaling. The results showed that there were significant differences in the forefoot shape between the two groups, and Taiwanese females had slightly wider feet with straighter big toe than Japanese females. The results of body and foot dimension comparison indicated that Taiwanese females were taller, heavier and had larger feet than Japanese females, while Japanese females had significantly larger toe 1 angle. Since some Taiwanese shoemakers adopt the Japanese shoe sizing system for making shoes, appropriateness of the shoe sizing system was also discussed. The present results provide very useful information for improving shoe last design and footwear fit for Taiwanese females.

In Search of the Prototypical Fraction

ERIC Educational Resources Information Center

Wright, Vince

2013-01-01

Vince Wright makes a convincing argument for presenting children with a different "prototype" of a fraction to the typical one-half. Consider how the prototype that Wright mentions may be applied to a variety of fraction concepts. We are sure that you will never look at a doughnut in quite the same way.

An Analysis of Japanese Medical Periodicals

PubMed Central

Taniguchi, Mayumi

1965-01-01

Medical periodicals published in Japan were studied by analyzing the journals abstracted in Igaku Chuo Zasshi (ICZ), the most comprehensive abstracting service for Japanese medical journal articles. Since the inauguration of medical periodicals in 1869, the number of journals has increased remarkably. In 1963 ICZ abstracted 1,074 journals published in Japan (960 in Japanese and 114 in other languages). Of these 1,074 titles, 855 were on medical sciences, of which 740 were substantive. A subject analysis of the substantive journals in ICZ, as compared to the 124 Japanese journals currently indexed in Index Medicus, was also made. Data were presented relating the number of periodicals to the size of the medical scene in Japan and the United States, and it was pointed out that good control of the literature, by whatever methods, requires a knowledge of the extent of the publications. PMID:14223738

46 CFR 154.560 - Cargo hose: Prototype test.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo hose: Prototype test. 154.560 Section 154.560... Hose § 154.560 Cargo hose: Prototype test. (a) Each cargo hose must be of a type that passes a prototype test at a pressure of at least five times its maximum working pressure at or below the minimum...

Affective Variables and Japanese L2 Reading Ability

ERIC Educational Resources Information Center

Kondo-Brown, Kimi

2006-01-01

This study investigates how 17 affective factors are related to Japanese second language (L2) reading comprehension and "kanji" knowledge test scores of 43 university students in advanced Japanese courses. Major findings are that: a) reading comprehension ability and "kanji" knowledge have direct associations with…

Learning from Japanese Middle School Math Teachers. Fastback.

ERIC Educational Resources Information Center

Whitman, Nancy C.

This document reviews the Japanese educational system and examines middle school education in particular to identify cultural differences and help improve educational quality in the United States. Contents include: (1) "An Overview of Japanese Education"; (2) "Teacher Behavior in the Classroom"; (3) "Teacher Behavior…

The MANIFEST prototyping design study

NASA Astrophysics Data System (ADS)

Lawrence, Jonathan S.; Ben-Ami, Sagi; Brown, David M.; Brown, Rebecca A.; Case, Scott; Chapman, Steve; Churilov, Vladimir; Colless, Matthew; Content, Robert; Depoy, Darren; Evans, Ian; Farrell, Tony; Goodwin, Michael; Jacoby, George; Klauser, Urs; Kuehn, Kyler; Lorente, Nuria P. F.; Mali, Slavko; Marshall, Jennifer; Muller, Rolf; Nichani, Vijay; Pai, Naveen; Prochaska, Travis; Saunders, Will; Schmidt, Luke; Shortridge, Keith; Staszak, Nicholas F.; Szentgyorgyi, Andrew; Tims, Julia; Vuong, Minh V.; Waller, Lewis G.; Zhelem, Ross

2016-08-01

MANIFEST is a facility multi-object fibre system for the Giant Magellan Telescope, which uses `Starbug' fibre positioning robots. MANIFEST, when coupled to the telescope's planned seeing-limited instruments, GMACS, and G-CLEF, offers access to: larger fields of view; higher multiplex gains; versatile reformatting of the focal plane via IFUs; image-slicers; and in some cases higher spatial and spectral resolution. The Prototyping Design Study phase for MANIFEST, nearing completion, has focused on developing a working prototype of a Starbugs system, called TAIPAN, for the UK Schmidt Telescope, which will conduct a stellar and galaxy survey of the Southern sky. The Prototyping Design Study has also included work on the GMT instrument interfaces. In this paper, we outline the instrument design features of TAIPAN, highlight the modifications that will be necessary for the MANIFEST implementation, and provide an update on the MANIFEST/instrument interfaces.

Rapid Prototyping of Mobile Learning Games

ERIC Educational Resources Information Center

Federley, Maija; Sorsa, Timo; Paavilainen, Janne; Boissonnier, Kimo; Seisto, Anu

2014-01-01

This position paper presents the first results of an on-going project, in which we explore rapid prototyping method to efficiently produce digital learning solutions that are commercially viable. In this first phase, rapid game prototyping and an iterative approach was tested as a quick and efficient way to create learning games and to evaluate…

[Dentistry in Korean during the Japanese occupation].

PubMed

Shin, Jae-Eu

2004-12-01

The Japanese introduction of dentistry into Korea was for treating the Japanese residing in Korea Noda-Oji was the first Japanese dentist for Japanese people in Korea in 1893, and Narajaki doyoyo, an invited dentist was posted in the Korean headquarter of Japanese army in September, 1905. The imperialist Japan licensed the dental technicians (yipchisa) without limit and controlled them generously so they could practice dentistry freely. This measure was contrary to that in Japan. (In Japan no new dental technician was licensed.) Komori, a dental technician opened his laboratory at Chungmuro in 1902. The dental technician had outnumbered by 1920. In 1907, the first Korean dental technician Sung-Ryong Choi practiced dentistry in Jongno. The imperialist Japan made the regulations for dental technicians to set a limit to the advertisement and medical practice of dental technicians. The first Korean dentists Suk-Tae Ham was register No. 1 in the dentist license. The Kyungsung dental school was established by Nagira Dasoni for the purpose of educating some Korean people that contributed to Japanese colonization. It made progress with the help of Japan, it was was given the approval of the establishment of the professional school in January the 25th, 1929. It was intended to produce Korean dentists in the first place but became the school for Japanese students later on. The association of Chosun dentist, which had been founded by Narajaki doyoyo, was managed by Japanese dentists in favor of the colonial ruling. The Hansung Association of Dentists established in 1925 was the organization made by the necessity of the association for Koreans only. The Japanese forcefully annexed the Association of Hansung Dentists (Koreans only) to the Association of Kyungsung Dentists to avoid collective actions of Korean dentists in the name of 'Naesunilche' -- 'Japan and Korea and one'. Their invading intention was shown in the event of 'decayed tooth preventive day'. Japanese controlled

LEARN JAPANESE--ELEMENTARY SCHOOL TEXT, VOLUME II.

ERIC Educational Resources Information Center

SATO, YAEKO; AND OTHERS

THIS TEXT WAS WRITTEN FOR THE USE OF THE ELEMENTARY SCHOOL TEACHER OF JAPANESE. IT IS TO BE USED IN THE SECOND SEMESTER OF JAPANESE LANGUAGE STUDY AND FOLLOWS THE AUDIO-LINGUAL ORIENTATION OF VOLUME I. THE MAIN GOAL OF BOTH VOLUMES IS "TO ELEVATE THE PUPIL'S MOTIVATION AND TO CULTIVATE PROPER PRONUNCIATION HABITS." THE NEW ITEMS IN VOLUME II…

Rapid Prototyping Technologies and their Applications in Prosthodontics, a Review of Literature.

PubMed

Torabi, Kianoosh; Farjood, Ehsan; Hamedani, Shahram

2015-03-01

The early computer-aided design/computer-aided manufacturing (CAD/CAM) systems were relied exclusively on subtractive methods. In recent years, additive methods by employing rapid prototyping (RP) have progressed rapidly in various fields of dentistry as they have the potential to overcome known drawbacks of subtractive techniques such as fit problems. RP techniques have been exploited to build complex 3D models in medicine since the 1990s. RP has recently proposed successful applications in various dental fields, such as fabrication of implant surgical guides, frameworks for fixed and removable partial dentures, wax patterns for the dental prosthesis, zirconia prosthesis and molds for metal castings, and maxillofacial prosthesis and finally, complete dentures. This paper aimed to offer a comprehensive literature review of various RP methods, particularly in dentistry, that are expected to bring many improvements to the field. A search was made through MEDLINE database and Google scholar search engine. The keywords; 'rapid prototyping' and 'dentistry' were searched in title/abstract of publications; limited to 2003 to 2013, concerning past decade. The inclusion criterion was the technical researches that predominately included laboratory procedures. The exclusion criterion was meticulous clinical and excessive technical procedures. A total of 106 articles were retrieved, recited by authors and only 50 met the specified inclusion criteria for this review. Selected articles had used rapid prototyping techniques in various fields in dentistry through different techniques. This review depicted the different laboratory procedures employed in this method and confirmed that RP technique have been substantially feasible in dentistry. With advancement in various RP systems, it is possible to benefit from this technique in different dental practices, particularly in implementing dental prostheses for different applications.

Sexuality education in Japanese medical schools.

PubMed

Shirai, M; Tsujimura, A; Abdelhamed, A; Horie, S

2017-07-01

The present study aimed to investigate current sexuality education in Japanese medical schools and the impact of position title in the Japanese Society for Sexual Medicine (JSSM). Questionnaires were mailed to urology departments in all Japanese medical schools. The responses were evaluated according to four factors: the number of lecture components, curriculum hours, degree of satisfaction with the components and degree of satisfaction with the curriculum hours. We also investigated differences in these four factors among three groups: Directors, Council members and non-members of the JSSM. The medians of curriculum hours and the number of the lecture components were 90.0 min and 7.0, respectively. The curriculum hours of the Directors (140.0 min) were significantly longer than those of the non-members (90.0 min; P<0.05). The number of lecture components taught by Directors (9.5) was significantly higher than that of the Council (4.0; P<0.01) and non-members (7.0; P<0.05). More than half of the faculties were not satisfied with the lecture components and curriculum hours. This is the first study on sexuality education in Japanese medical schools. It showed the inadequacy of both curriculum hours and lecture components, and that the position title of department chair affects sexuality education in medical schools.

U.S. and Japanese Source Reliance for Environmental Information.

ERIC Educational Resources Information Center

Pierce, John C.; And Others

1988-01-01

Examines environmental information source reliance among American and Japanese citizens. Finds that the Japanese are inclined to rely on non-mass media sources, whereas Americans exhibit greater differentiation among sources. (RS)

Combined experimental and numerical evaluation of a prototype nano-PCM enhanced wallboard

DOE Office of Scientific and Technical Information (OSTI.GOV)

Biswas, Kaushik; LuPh.D., Jue; Soroushian, Parviz

2014-01-01

In the United States, forty-eight (48) percent of the residential end-use energy consumption is spent on space heating and air conditioning. Reducing envelope-generated heating and cooling loads through application of phase change material (PCM)-enhanced building envelopes can facilitate maximizing the energy efficiency of buildings. Combined experimental testing and numerical modeling of PCM-enhanced envelope components are two important aspects of the evaluation of their energy benefits. An innovative phase change material (nano-PCM) was developed with PCM encapsulated with expanded graphite (interconnected) nanosheets, which is highly conductive for enhanced thermal storage and energy distribution, and is shape-stable for convenient incorporation into lightweightmore » building components. A wall with cellulose cavity insulation and prototype PCM-enhanced interior wallboards was built and tested in a natural exposure test (NET) facility in a hot-humid climate location. The test wall contained PCM wallboards and regular gypsum wallboard, for a side-by-side annual comparison study. Further, numerical modeling of the walls containing the nano-PCM wallboard was performed to determine its actual impact on wall-generated heating and cooling loads. The model was first validated using experimental data, and then used for annual simulations using Typical Meteorological Year (TMY3) weather data. This article presents the measured performance and numerical analysis evaluating the energy-saving potential of the nano-PCM-enhanced wallboard.« less

Acculturation and Perceptions of a Good Death Among Japanese Americans and Japanese Living in the U.S.

PubMed

Mori, Masanori; Kuwama, Yuichiro; Ashikaga, Takamaru; Parsons, Henrique A; Miyashita, Mitsunori

2018-01-01

Acculturation is the phenomenon of the attitudinal changes of individuals who come into continuous contact with another culture. Despite the long history of Japanese immigration to America, little is known about the impact of acculturation on perceptions of a good death. To examine differences in perceptions of a good cancer death among Japanese Americans (JA/A), Japanese living in America (J/A), and the Japanese living in Japan (J/J). We administered surveys among JA/A and J/A and used historical J/J data for reference. Primary endpoint was the proportion of respondents who expressed the necessity of core and optional items of the Good Death Inventory. Group differences ≥20% were deemed clinically important. In total, 441 survey responses in America and 2548 in Japan were obtained. More than 80% of respondents consistently considered nine of 10 core items necessary without significant group differences. No core item reached a ≥20% group difference. Three of the eight optional items reached ≥20% group difference: fighting against disease until one's last moment (49%, P < 0.0001; 52%, P < 0.0001; and 73% in JA/A, J/A, and J/J, respectively), knowing what to expect about one's condition in the future (83%, P < 0.0001; 80%, P < 0.0001; and 58%, respectively), and having faith (64%, P = 0.0548; 43%, P = 0.0127; and 38%, respectively). Although most core items of a good death were preserved throughout the levels of acculturation, perceptions of some optional items shifted away from Japanese attitudes as individuals became more acculturated. Understanding of different levels of acculturation may help clinicians provide culturally sensitive end-of-life care. Copyright © 2017 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

The Effectiveness of a Japanese Language Course on Cross-Cultural Competence.

ERIC Educational Resources Information Center

Miyamoto, Yumi; Rasmussen, Roger

1998-01-01

A quasi-experimental research design was employed to measure the effectiveness of a Japanese language and culture course entitled "Japanese for the Business Community." The study analyzed seven cross-cultural competence attributes in interactions with Japanese people in business settings. (Auth/JL)

Japanese women's experiences of pharmacological pain relief in New Zealand.

PubMed

Doering, Keiko; Patterson, Jean; Griffiths, Christine R

2014-06-01

In Japan, most women manage labour pain without pharmacological interventions. However, New Zealand statistics show a high percentage of epidural use amongst Asian women. Entonox (a gas mixture of nitrous oxide and oxygen) and pethidine are also available to women in New Zealand. This article investigates how Japanese women in New Zealand respond to the use of pharmacological pain relief in labour. The study was guided by two research questions: (1) How do Japanese women experience and manage labour pain in New Zealand? (2) How do they feel about the use of pharmacological pain relief? Thirteen Japanese women who had given birth in New Zealand were interviewed individually or in a focus group. The conversations were analysed using thematic analysis. Although in Japan very few women use pain relief, nine women received epidural and/or Entonox out of 11 women who experienced labour pain. The contrast between their Japanese cultural expectations and their birth experiences caused some of the women subsequent personal conflict. Japanese women's cultural perspectives and passive attitudes were demonstrated to influence the decision-making process concerning pain relief. It was concluded that understanding Japanese cultural worldviews and approaches to the role of pain in labour would help maternity providers in their provision of appropriate care for Japanese women. Copyright © 2013 Australian College of Midwives. Published by Elsevier Ltd. All rights reserved.

The Japanese Experience of the NameExoWorlds Competition: Translating Official Information into Japanese to Enable Domestic Groups to Participate in a Global Event

NASA Astrophysics Data System (ADS)

Usuda-Sato, K.; Iizuka, R.; Yamaoka, H.; Handa, T.

2018-02-01

Translation of information from English is an essential step toward ensuring the involvement of non-English speakers in global events. The NameExoWorlds competition, led by the International Astronomical Union (IAU), was held from 9 July 2014 to 15 December 2015. It was a unique event that invited the public to name celestial bodies. In Japan, language acts as a significant barrier for amateur astronomers and school students to participate in global events hosted in English. To address this concern, we established a domestic working group to set up a Japanese website and provided a translation of the IAU's official site for the NameExoWorlds competition. We also developed additional original information in Japanese when needed and sent announcements to a mailing lists of astronomy societies in Japan. As a result, 28% of the registered groups and 47% of proposals for names were from Japan, making Japan the most active country for these stages of the competition. After the competition had ended, we carried out a survey in the Japanese astronomy community and received 124 responses. We found that most of the Japanese participants referred to our official Japanese website in order to overcome the language barrier and participate in the competition. This article explores our work of translating the competition information into Japanese and our evaluation of the impact of this action on the uptake by Japanese astronomy enthusiasts.

End effector monitoring system: An illustrated case of operational prototyping

NASA Technical Reports Server (NTRS)

Malin, Jane T.; Land, Sherry A.; Thronesbery, Carroll

1994-01-01

Operational prototyping is introduced to help developers apply software innovations to real-world problems, to help users articulate requirements, and to help develop more usable software. Operational prototyping has been applied to an expert system development project. The expert system supports fault detection and management during grappling operations of the Space Shuttle payload bay arm. The dynamic exchanges among operational prototyping team members are illustrated in a specific prototyping session. We discuss the requirements for operational prototyping technology, types of projects for which operational prototyping is best suited and when it should be applied to those projects.

Economic Statistics and Information Concerning the Japanese Auto Industry

DOT National Transportation Integrated Search

1980-12-01

The report examines the following aspects of the Japanese automobile Industry: Identification of Japanese agencies that receive statistical data on the automobile industry; Determination of research and development and capital investment procedures; ...

Japanese Educational System Improving Ongoing Practice in Schools.

ERIC Educational Resources Information Center

Arimoto, Masahiro

1995-01-01

Describes the Japanese education system's unique characteristics. Japanese schools provide a prescribed curriculum, with pupils confined to desks. Teachers identify with their schools and are committed to service. Teachers and students try to improve schools by working harder. Understanding school effectiveness requires frameworks deeply rooted in…

Standardization of Weed Pollen Extracts, Japanese Hop and Mugwort, in Korea

PubMed Central

Jeong, Kyoung Yong; Son, Mina; Choi, Soo-Young; Park, Kyung Hee; Park, Hye Jung; Hong, Chein-Soo; Lee, Jae-Hyun

2016-01-01

Purpose Japanese hop (Humulus spp.) and mugwort (Artemisia spp.) are notable causes of autumn pollinosis in East Asia. However, Japanese hop and mugwort pollen extracts, which are widely used for the diagnosis, have not been standardized. This study was performed to standardize Japanese hop and mugwort pollen extracts. Materials and Methods Allergen extracts were prepared in a standardized way using locally collected Humulus japonicus and purchased Artemisia vulgaris pollens. The immunoglobulin E (IgE) reactivities of prepared extracts were compared with commercial extracts via IgE immunoblotting and inhibition analyses. Intradermal skin tests were performed to determine the bioequivalent allergy unit (BAU). Results The IgE reactive components of the extracts via IgE immunoblotting were similar to those of commercial extracts. A 11-kDa allergen showed the strongest IgE reactivity in Japanese hop, as did a 28-kDa allergen in mugwort pollen extracts. Allergenic potencies of the investigatory Japanese hop and mugwort extracts were essentially indistinguishable from the commercial ones. Sums of erythema of 50 mm by the intradermal skin test (ΣED50) were calculated to be 14.4th and 13.6th three-fold dilutions for Japanese hop and mugwort extracts, respectively. Therefore, the allergenic activity of the prepared extracts was 90827.4 BAU/mg for Japanese hop and 34412 BAU/mg for mugwort. Conclusion We produced Japanese hop and mugwort pollen extracts using a standardized method. Standardized Japanese hop and mugwort pollen extracts will facilitate the production of improved diagnostic and immunotherapeutic reagents. PMID:26847293

Testing reflective insulation for improvement of buildings energy efficiency

NASA Astrophysics Data System (ADS)

Vrachopoulos, Michalis Gr.; Koukou, Maria K.; Stavlas, Dimitris G.; Stamatopoulos, Vasilis N.; Gonidis, Achilleas F.; Kravvaritis, Eleftherios D.

2012-03-01

Reflective insulation stands as an alternative to common building materials used to reduce a building's heating and cooling loads. In this work, an experimental prototype chamber facility has been designed and constructed at the campus of the Technological Educational Institution of Halkida, located in an area of climatic zone B in Greece, aiming to the evaluation of reflective insulation's performance. Reflective insulation is a part of the test room wall construction, specifically, heat insulation material of the vertical wall construction all directions (North, South, East, West), and temperature and water proofing element of the roof. Measurements were obtained for both winter and summer periods. Results indicate that the existence of reflective insulation during summer period averts the overheating at the interior of the experimental chamber, while during winter the heat is retained in the chamber.

Dimensional Error in Rapid Prototyping with Open Source Software and Low-cost 3D-printer

PubMed Central

Andrade-Delgado, Laura; Telich-Tarriba, Jose E.; Fuente-del-Campo, Antonio; Altamirano-Arcos, Carlos A.

2018-01-01

Summary: Rapid prototyping models (RPMs) had been extensively used in craniofacial and maxillofacial surgery, especially in areas such as orthognathic surgery, posttraumatic or oncological reconstructions, and implantology. Economic limitations are higher in developing countries such as Mexico, where resources dedicated to health care are limited, therefore limiting the use of RPM to few selected centers. This article aims to determine the dimensional error of a low-cost fused deposition modeling 3D printer (Tronxy P802MA, Shenzhen, Tronxy Technology Co), with Open source software. An ordinary dry human mandible was scanned with a computed tomography device. The data were processed with open software to build a rapid prototype with a fused deposition machine. Linear measurements were performed to find the mean absolute and relative difference. The mean absolute and relative difference was 0.65 mm and 1.96%, respectively (P = 0.96). Low-cost FDM machines and Open Source Software are excellent options to manufacture RPM, with the benefit of low cost and a similar relative error than other more expensive technologies. PMID:29464171

Dimensional Error in Rapid Prototyping with Open Source Software and Low-cost 3D-printer.

PubMed

Rendón-Medina, Marco A; Andrade-Delgado, Laura; Telich-Tarriba, Jose E; Fuente-Del-Campo, Antonio; Altamirano-Arcos, Carlos A

2018-01-01

Rapid prototyping models (RPMs) had been extensively used in craniofacial and maxillofacial surgery, especially in areas such as orthognathic surgery, posttraumatic or oncological reconstructions, and implantology. Economic limitations are higher in developing countries such as Mexico, where resources dedicated to health care are limited, therefore limiting the use of RPM to few selected centers. This article aims to determine the dimensional error of a low-cost fused deposition modeling 3D printer (Tronxy P802MA, Shenzhen, Tronxy Technology Co), with Open source software. An ordinary dry human mandible was scanned with a computed tomography device. The data were processed with open software to build a rapid prototype with a fused deposition machine. Linear measurements were performed to find the mean absolute and relative difference. The mean absolute and relative difference was 0.65 mm and 1.96%, respectively ( P = 0.96). Low-cost FDM machines and Open Source Software are excellent options to manufacture RPM, with the benefit of low cost and a similar relative error than other more expensive technologies.

Compulsory "Foreign Language Activities" in Japanese Primary Schools

ERIC Educational Resources Information Center

Hashimoto, Kayoko

2011-01-01

From 2011, the new curriculum for introducing English to Japanese primary schools will be fully implemented in the form of "foreign language activities". This innovation forms part of the government's plan to cultivate "Japanese with English abilities", a development based on the awareness, particularly in the business sector,…

On the Processing of Japanese Wh-Questions: An ERP Study

PubMed Central

Ueno, Mieko; Kluender, Robert

2009-01-01

The processing of Japanese wh-questions was investigated using event-related brain potentials (ERPs). Unlike in English or German, a wh-element in Japanese need not be displaced from its canonical position, but instead needs a corresponding Q(uestion)-particle to indicate its interrogative scope. We tested to see if there were any processing correlates specific to these features of Japanese wh-questions. Both mono-clausal and bi-clausal Japanese wh-questions elicited right-lateralized anterior negativity (RAN) between wh-words and corresponding Q-particles, relative to structurally-equivalent yes/no-question control conditions. These results suggest a reliable neural processing correlate of the dependency between wh-elements and Q-particles in Japanese, which is similar to effects of (left) anterior negativity seen between wh-fillers and gaps in English and German, but with a right- rather than left-lateralized distribution. It is suggested that wh-in-situ questions in Japanese are processed by the incremental formation of a long-distance dependency between wh-elements and their Q-particles, resulting in a working memory load for keeping track of the scopeless wh-elements. PMID:19501576

Rapid prototyping of flexible intrafascicular electrode arrays by picosecond laser structuring

NASA Astrophysics Data System (ADS)

Mueller, Matthias; de la Oliva, Natalia; del Valle, Jaume; Delgado-Martínez, Ignacio; Navarro, Xavier; Stieglitz, Thomas

2017-12-01

Objective. Interfacing the peripheral nervous system can be performed with a large variety of electrode arrays. However, stimulating and recording a nerve while having a reasonable amount of channels limits the number of available systems. Translational research towards human clinical trial requires device safety and biocompatibility but would benefit from design flexibility in the development process to individualize probes. Approach. We selected established medical grade implant materials like precious metals and Parylene C to develop a rapid prototyping process for novel intrafascicular electrode arrays using a picosecond laser structuring. A design for a rodent animal model was developed in conjunction with an intrafascicular implantation strategy. Electrode characterization and optimization was performed first in saline solution in vitro before performance and biocompatibility were validated in sciatic nerves of rats in chronic implantation. Main results. The novel fabrication process proved to be suitable for prototyping and building intrafascicular electrode arrays. Electrochemical properties of the electrode sites were enhanced and tested for long-term stability. Chronic implantation in the sciatic nerve of rats showed good biocompatibility, selectivity and stable stimulation thresholds. Significance. Established medical grade materials can be used for intrafascicular nerve electrode arrays when laser structuring defines structure size in the micro-scale. Design flexibility reduces re-design cycle time and material certificates are beneficial support for safety studies on the way to clinical trials.

Rapid prototyping of flexible intrafascicular electrode arrays by picosecond laser structuring.

PubMed

Mueller, Matthias; de la Oliva, Natalia; Del Valle, Jaume; Delgado-Martínez, Ignacio; Navarro, Xavier; Stieglitz, Thomas

2017-12-01

Interfacing the peripheral nervous system can be performed with a large variety of electrode arrays. However, stimulating and recording a nerve while having a reasonable amount of channels limits the number of available systems. Translational research towards human clinical trial requires device safety and biocompatibility but would benefit from design flexibility in the development process to individualize probes. We selected established medical grade implant materials like precious metals and Parylene C to develop a rapid prototyping process for novel intrafascicular electrode arrays using a picosecond laser structuring. A design for a rodent animal model was developed in conjunction with an intrafascicular implantation strategy. Electrode characterization and optimization was performed first in saline solution in vitro before performance and biocompatibility were validated in sciatic nerves of rats in chronic implantation. The novel fabrication process proved to be suitable for prototyping and building intrafascicular electrode arrays. Electrochemical properties of the electrode sites were enhanced and tested for long-term stability. Chronic implantation in the sciatic nerve of rats showed good biocompatibility, selectivity and stable stimulation thresholds. Established medical grade materials can be used for intrafascicular nerve electrode arrays when laser structuring defines structure size in the micro-scale. Design flexibility reduces re-design cycle time and material certificates are beneficial support for safety studies on the way to clinical trials.

Iteration and Prototyping in Creating Technical Specifications.

ERIC Educational Resources Information Center

Flynt, John P.

1994-01-01

Claims that the development process for computer software can be greatly aided by the writers of specifications if they employ basic iteration and prototyping techniques. Asserts that computer software configuration management practices provide ready models for iteration and prototyping. (HB)

Validity of prototype diagnosis for mood and anxiety disorders.

PubMed

DeFife, Jared A; Peart, Joanne; Bradley, Bekh; Ressler, Kerry; Drill, Rebecca; Westen, Drew

2013-02-01

CONTEXT With growing recognition that most forms of psychopathology are best represented as dimensions or spectra, a central question becomes how to implement dimensional diagnosis in a way that is empirically sound and clinically useful. Prototype matching, which involves comparing a patient's clinical presentation with a prototypical description of the disorder, is an approach to diagnosis that has gained increasing attention with forthcoming revisions to both the DSM and the International Classification of Diseases. OBJECTIVE To examine prototype diagnosis for mood and anxiety disorders. DESIGN, SETTING, AND PATIENTS In the first study, we examined clinicians' DSM-IV and prototype diagnoses with their ratings of the patients' adaptive functioning and patients' self-reported symptoms. In the second study, independent interviewers made prototype diagnoses following either a systematic clinical interview or a structured diagnostic interview. A third interviewer provided independent ratings of global adaptive functioning. Patients were recruited as outpatients (study 1; N = 84) and from primary care clinics (study 2; N = 143). MAIN OUTCOME MEASURES Patients' self-reported mood, anxiety, and externalizing symptoms along with independent clinical ratings of adaptive functioning. RESULTS Clinicians' prototype diagnoses showed small to moderate correlations with patient-reported psychopathology and performed as well as or better than DSM-IV diagnoses. Prototype diagnoses from independent interviewers correlated on average r = .50 and showed substantial incremental validity over DSM-IV diagnoses in predicting adaptive functioning. CONCLUSIONS Prototype matching is a viable alternative for psychiatric diagnosis. As in research on personality disorders, mood and anxiety disorder prototypes outperformed DSM-IV decision rules in predicting psychopathology and global functioning. Prototype matching has multiple advantages, including ease of use in clinical practice, reduced

Recovery Act. Advanced Load Identification and Management for Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yang, Yi; Casey, Patrick; Du, Liang

2014-02-12

In response to the U.S. Department of Energy (DoE)’s goal of achieving market ready, net-zero energy residential and commercial buildings by 2020 and 2025, Eaton partnered with the Department of Energy’s National Renewable Energy Laboratory (NREL) and Georgia Institute of Technology to develop an intelligent load identification and management technology enabled by a novel “smart power strip” to provide critical intelligence and information to improve the capability and functionality of building load analysis and building power management systems. Buildings account for 41% of the energy consumption in the United States, significantly more than either transportation or industrial. Within the buildingmore » sector, plug loads account for a significant portion of energy consumption. Plug load consumes 15-20% of building energy on average. As building managers implement aggressive energy conservation measures, the proportion of plug load energy can increase to as much as 50% of building energy leaving plug loads as the largest remaining single source of energy consumption. This project focused on addressing plug-in load control and management to further improve building energy efficiency accomplished through effective load identification. The execution of the project falls into the following three major aspects; An intelligent load modeling, identification and prediction technology was developed to automatically determine the type, energy consumption, power quality, operation status and performance status of plug-in loads, using electric waveforms at a power outlet level. This project demonstrated the effectiveness of the developed technology through a large set of plug-in loads measurements and testing; A novel “Smart Power Strip (SPS) / Receptacle” prototype was developed to act as a vehicle to demonstrate the feasibility of load identification technology as a low-cost, embedded solution; and Market environment for plug-in load control and management

Resource Prospector (RP) - Early Prototyping and Development

NASA Technical Reports Server (NTRS)

Andrews, D.; Colaprete, A.; Quinn, J.; Bluethmann, B.; Trimble, J.

2015-01-01

exploration of near-Earth asteroids (NEAs) and Mars. In order to reduce risk and explore system designs, the RP project is attempting two-fold approaches to development as it looks towards flight. We continue to explore flight planning, requirements, and interfaces definition by using Engineering Test Units (ETUs), looking towards lunar deployment, while also using fiscal year 2015 to develop, build and test an earth-terrestrial prototype rover and payload system. This terrestrial prototype, called "RP15", is built to both inform the system design, and to be a partnership advocacy tool for this unique mission. RP15 must be affordable within the resource and time constraints of fiscal year 2015, while working to the following Needs, Goals, and Objectives provided by HEOMD/AES: 1. Demonstrate rover mobility in a 1g environment 2. The Surface Segment (prototype rover + payload system) shall represent the flight system concept with as much fidelity as affordable (limited by cost and schedule) - Surface Segment shall be the approximate size/dimension/footprint -Surface Segment shall package all the expected devices (instruments, systems, etc.), even if some facets are mocked-up due to time/cost constraints -Overall Surface Segment fidelity negotiable to make achievable 3. Priority should be given to illustrating mission functionality over support functionality, which exists solely to support mission functionality This paper will provide an overview of RP project developments, including the design and build, capturing the development and initial integrated testing of RP15 in relevant environments.

Neural Measures of a Japanese Consonant Length Discrimination by Japanese and American English Listeners: Affects of Attention

PubMed Central

Hisagi, Miwako; Shafer, Valerie L.; Strange, Winifred; Sussman, Elyse S.

2015-01-01

This study examined automaticity of discrimination of a Japanese length contrast for consonants (miʃi vs. miʃʃi) in native (Japanese) and non-native (American-English) listeners using behavioral measures and the event-related potential (ERP) mismatch negativity (MMN). Attention to the auditory input was manipulated either away from the auditory input via a visual oddball task (Visual Attend), or to the input by asking the listeners to count auditory deviants (Auditory Attend). Results showed a larger MMN when attention was focused on the consonant contrast than away from it for both groups. The MMN was larger for consonant duration increments than decrements. No difference in MMN between the language groups was observed, but the Japanese listeners did show better behavioral discrimination than the American English listeners. In addition, behavioral responses showed a weak, but significant correlation with MMN amplitude. These findings suggest that both acoustic-phonetic properties and phonological experience affects automaticity of speech processing. PMID:26119918

Japanese Culture in the United States of America; An Annotated Bibliography.

ERIC Educational Resources Information Center

Connor, John W., Comp.

This bibliography describes and briefly reviews, from an anthropological perspective, books and articles on the Japanese in the United States. Works cited include: (1) bibliographies; (2) general studies on Japanese Americans; (3) works dealing with the cultural heritage of the Japanese immigrant generation; (4) literature on the Japanese…

Taming the Wild: Approaches to Nature in Japanese Early Childhood Education

ERIC Educational Resources Information Center

Burke, Rachael S.

2014-01-01

The Japanese early childhood curriculum provides ample opportunities for children to interact with nature and to learn about natural phenomena. However, using Kalland (1995) and Martinez's (2008) theories about Japanese constructions of nature, this paper argues that most Japanese early childhood experiences do not constitute direct contact with…

Normalizing Social Networking in a Beginners' Japanese Course

ERIC Educational Resources Information Center

Morofushi, Mari; Pasfield-Neofitou, Sarah Ellen

2014-01-01

With the spread of the Internet, students now have greater opportunities to use Japanese outside of the classroom. For example, they can interact with other Japanese speakers through instant messaging or social networking, or utilize online dictionaries and translation tools to decipher websites in ways that would be impossible with traditional…

Sibling Relationships Cognition in Japanese Female University Students

ERIC Educational Resources Information Center

Sawai, Misae; Kato, Daiki

2017-01-01

This study examined the factor structure of sibling relationships in Japanese female university students. Two hundred and fifteen Japanese female university students participated in this study. The Adult Sibling Relationship Scale (ASRQ, Stocker et al., 1997) was used to measure sibling relationship cognition. The model was constructed as a result…

Japanese High School Teachers' Views on Pupil Misbehaviour

ERIC Educational Resources Information Center

Kyriacou, Chris

2010-01-01

This study aimed to explore Japanese high school teachers' views of pupil misbehaviour in order to contribute to the growing international literature on discipline in schools. A total of 141 Japanese high school teachers completed a questionnaire which explored their views regarding the factors accounting for pupil misbehaviour, the frequency of…

PANDA Muon System Prototype

NASA Astrophysics Data System (ADS)

Abazov, Victor; Alexeev, Gennady; Alexeev, Maxim; Frolov, Vladimir; Golovanov, Georgy; Kutuzov, Sergey; Piskun, Alexei; Samartsev, Alexander; Tokmenin, Valeri; Verkheev, Alexander; Vertogradov, Leonid; Zhuravlev, Nikolai

2018-04-01

The PANDA Experiment will be one of the key experiments at the Facility for Antiproton and Ion Research (FAIR) which is under construction now in the territory of the GSI Helmholtz Centre for Heavy Ion Research in Darmstadt, Germany. PANDA is aimed to study hadron spectroscopy and various topics of the weak and strong forces. Muon System is chosen as the most suitable technology for detecting the muons. The Prototype of the PANDA Muon System is installed on the test beam line T9 at the Proton Synchrotron (PS) at CERN. Status of the PANDA Muon System prototype is presented with few preliminary results.

Performance of Prototype High-Flow Inhalable Dust Sampler in a Livestock Production Facility

PubMed Central

Anthony, T. Renée; Cai, Changjie; Mehaffy, John; Sleeth, Darrah; Volckens, John

2017-01-01

A high-flow inhalable sampler, designed for operational flow rates up to 10 L/min using computer simulations and examined in wind tunnel experiments, was evaluated in the field. This prototype sampler was deployed in collocation with an IOM (the benchmark standard sampler) in a swine farrowing building to examine the sampling performance for assessing concentrations of inhalable particulate mass and endotoxin. Paired samplers were deployed for 24-hours on 19 days over a three-month period. On each sampling day, the paired samplers were deployed at three fixed locations and data were analyzed to identify agreement and to examine systematic biases between concentrations measured by these samplers. Thirty-six paired gravimetric samples were analyzed; insignificant, unsubstantial differences between concentrations were identified between the two samplers (p=0.16; mean difference 0.03 mg/m3). Forty-four paired samples were available for endotoxin analysis, and a significant (p=0.001) difference in endotoxin concentration was identified: the prototype sampler, on average, had 120 EU/m3 more endotoxin than did the IOM samples. Since the same gravimetric samples were analyzed for endotoxin content, the endotoxin difference is likely attributable to differences in endotoxin extraction. The prototype’s disposable thin-film polycarbonate capsule was included with the filter in the 1-hour extraction procedure while the internal plastic cassette of the IOM required a rinse procedure that is susceptible to dust losses. Endotoxin concentrations measured with standard plastic IOM inserts that follow this rinsing procedure may underestimate the true endotoxin exposure concentrations. The maximum concentrations in the study (1.55 mg/m3 gravimetric, 2328 EU/m3 endotoxin) were lower than other agricultural or industrial environments. Future work should explore the performance of the prototype sampler in dustier environments, where concentrations approach particulates not otherwise

A Prototype Indicators System for U.S. Climate Changes, Impacts, Vulnerabilities, and Responses

NASA Astrophysics Data System (ADS)

Kenney, M. A.; Janetos, A.; Gerst, M.; Lloyd, A.; Wolfinger, J. F.; Reyes, J. J.; Anderson, S. M.; Pouyat, R. V.

2015-12-01

Indicators are observations or calculations that are used to systematically report or forecast social and biophysical conditions over time. When the purpose of indicators is to, in part, provide complex scientific information that is understood by non-scientists and included in decision processes, the choice of indicators requires a structured process that includes co-production among a range of actors, including scientists, decision-makers, and a range of stakeholders. Here we describe recommendations on a vision and a prototype created for an indicators system, we term the National Climate Indicators System (NCIS). The goal of the NCIS is to create a system of physical, natural, and societal indicators to communicate and inform decisions about climate changes, impacts, vulnerabilities, and responses. The process of generating the indicator system involved input from over 200 subject-matter experts. Organized into 13 teams, experts created conceptual models of their respective sectors to generate an initial recommended set of indicators. A subset of indicators, which could be immediately implemented, were prototyped for the U.S. Global Change Research Program (USGCRP) a Federal program that coordinates and supports integration of global change research across the government. USGCRP reviewed the recommendations (Kenney et al., 2014) and prototypes provided by the scientific experts, and recently launched 14 indicators as proof-of-concept in support of a sustained National Climate Assessment and to solicit feedback from the users. Social science research is currently being undertaken in order to evaluate how well the prototype indicators communicate science to non-scientists, the usability of indicator system portal by scientists and decision-makers, and the development of information visualization guidelines to improve visual communication effectiveness. The goal of such efforts would be to provide input into the development of a more comprehensive USGCRP indicator

Women among First Authors in Japanese Cardiovascular Journal.

PubMed

Fujii, Tomoko; Matsuyama, Tasuku; Takeuchi, Jiro; Hara, Masahiko; Kitamura, Tetsuhisa; Yamauchi-Takihara, Keiko

2018-03-30

The representation of women in Japanese academic medicine is not evident. We aimed to assess trends related to the proportion of female first authors in Japanese cardiovascular journals.We reviewed original research articles in 6 journals published in English by Japanese societies between 2006 and 2015 related to cardiovascular fields. We conducted a multivariable logistic regression analysis to assess the factors associated with the gender of first authors and plotted the trend of predicted probability for female first authors over the study period. Of 7,005 original articles, 1,330 (19.0%) had female first authors. Affiliations located in Japan (adjusted odds ratio [aOR], 0.76; 95% confidence interval [CI], 0.71-0.81), concurrent first and corresponding authors (aOR, 0.69; 95% CI, 0.64-0.74), and the total number of listed authors (aOR, 0.97; 95% CI, 0.95-0.99) were negatively associated with female first authors. The adjusted probability of a female first author increased from 13% to 20% on an average between 2006 and 2009, but the increase reached a plateau after 2010.Female first authors of original research articles published in Japanese cardiovascular journals increased over the examined decade. However, the representation of women is still low and has plateaued in recent years. A gender gap in authorship for Japanese cardiovascular journals remains.

Content Analysis of Life Exhibitions in Japanese Science Museums and Centres

ERIC Educational Resources Information Center

Kazama, Tomoko; Ogawa, Masakata

2015-01-01

Life exhibitions in Japanese science museums (SMs) face difficulties in coping with rapid progress in the life sciences owing to certain constraints around the frequency of exhibit renovations, and the Japanese indigenous understanding of the natural world (Shizen) that Japanese visitors unconsciously bring with them. To what extent do current…

On A Project Work for International Students Paired with Japanese Partners in a Summer Intensive Japanese Program for Science and Technology

NASA Astrophysics Data System (ADS)

Fudano, Hiroko

A project work in which learners of a foreign language engage in a task with the native speakers is one of the effective ways to bring in ample real communication opportunities to a classroom. This scheme also gives both parties meaningful experiences for intercultural understanding. This paper reports a “Pythagoras” machine production project in which international students were paired up with Japanese students as a part of a Japanese for science and technology course in a summer intensive program. Based on the participants‧ course evaluation data, the paper also discusses the effectiveness of the project for Japanese language learning and for promoting intercultural understanding.

2011 Japanese Nuclear Incident

EPA Pesticide Factsheets

EPA’s RadNet system monitored the environmental radiation levels in the United States and parts of the Pacific following the Japanese Nuclear Incident. Learn about EPA’s response and view historical laboratory data and news releases.

Japanese guidelines for childhood asthma 2017.

PubMed

Arakawa, Hirokazu; Hamasaki, Yuhei; Kohno, Yoichi; Ebisawa, Motohiro; Kondo, Naomi; Nishima, Sankei; Nishimuta, Toshiyuki; Morikawa, Akihiro

2017-04-01

The Japanese Guideline for the Diagnosis and Treatment of Allergic Diseases 2017 (JAGL 2017) includes a minor revision of the Japanese Pediatric Guideline for the Treatment and Management of Asthma 2012 (JPGL 2012) by the Japanese Society of Pediatric Allergy and Clinical Immunology. The section on child asthma in JAGL 2017 provides information on how to diagnose asthma between infancy and adolescence (0-15 years of age). It makes recommendations for best practices in the management of childhood asthma, including management of acute exacerbations and non-pharmacological and pharmacological management. This guideline will be of interest to non-specialist physicians involved in the care of children with asthma. JAGL differs from the Global Initiative for Asthma Guideline in that JAGL emphasizes diagnosis and early intervention of children with asthma at <2 years or 2-5 years of age. The first choice of treatment depends on the severity and frequency of symptoms. Pharmacological management, including step-up or step-down of drugs used for long-term management based on the status of asthma control levels, is easy to understand; thus, this guideline is suitable for the routine medical care of children with asthma. JAGL also recommends using a control test in children, so that the physician aims for complete control by avoiding exacerbating factors and appropriately using anti-inflammatory drugs (for example, inhaled corticosteroids and leukotriene receptor antagonists). Copyright © 2016 Japanese Society of Allergology. Production and hosting by Elsevier B.V. All rights reserved.

Demand response-enabled model predictive HVAC load control in buildings using real-time electricity pricing

NASA Astrophysics Data System (ADS)

Avci, Mesut

A practical cost and energy efficient model predictive control (MPC) strategy is proposed for HVAC load control under dynamic real-time electricity pricing. The MPC strategy is built based on a proposed model that jointly minimizes the total energy consumption and hence, cost of electricity for the user, and the deviation of the inside temperature from the consumer's preference. An algorithm that assigns temperature set-points (reference temperatures) to price ranges based on the consumer's discomfort tolerance index is developed. A practical parameter prediction model is also designed for mapping between the HVAC load and the inside temperature. The prediction model and the produced temperature set-points are integrated as inputs into the MPC controller, which is then used to generate signal actions for the AC unit. To investigate and demonstrate the effectiveness of the proposed approach, a simulation based experimental analysis is presented using real-life pricing data. An actual prototype for the proposed HVAC load control strategy is then built and a series of prototype experiments are conducted similar to the simulation studies. The experiments reveal that the MPC strategy can lead to significant reductions in overall energy consumption and cost savings for the consumer. Results suggest that by providing an efficient response strategy for the consumers, the proposed MPC strategy can enable the utility providers to adopt efficient demand management policies using real-time pricing. Finally, a cost-benefit analysis is performed to display the economic feasibility of implementing such a controller as part of a building energy management system, and the payback period is identified considering cost of prototype build and cost savings to help the adoption of this controller in the building HVAC control industry.

Polymeric composites on the basis of Martian ground for building future mars stations

NASA Astrophysics Data System (ADS)

Mukbaniani, O. V.; Aneli, J. N.; Markarashvili, E. G.; Tarasashvili, M. V.; Aleksidze, N. D.

2016-04-01

The colonization of Mars will require obtaining building materials which can be put in place and processed into buildings via various constructive technologies. We tried to use artificial Martian ground - AMG (GEO PAT 11-234 (2015)) and special resins for the preparation of building block prototypes. The composite material has been obtained based on the AMG as filler, epoxy resin (type ED-20) and tetraethoxysilane - TEOS. We have studied strengthening - softening temperatures and water absorption of the AMG polymer composites that are determined by epoxy resin and TEOS modification. Comparison of the experimental results shows that composites containing modified filler have higher values of the maximum ultimate strength, resistance and flexibility parameters than unmodified composites with definite loading. Modified composites also have a higher softening temperature and lower water absorption.

Modeling of two-storey precast school building using Ruaumoko 2D program

NASA Astrophysics Data System (ADS)

Hamid, N. H.; Tarmizi, L. H.; Ghani, K. D.

2015-05-01

The long-distant earthquake loading from Sumatra and Java Island had caused some slight damages to precast and reinforced concrete buildings in West Malaysia such as cracks on wall panels, columns and beams. Subsequently, the safety of existing precast concrete building is needed to be analyzed because these buildings were designed using BS 8110 which did not include the seismic loading in the design. Thus, this paper emphasizes on the seismic performance and dynamic behavior of precast school building constructed in Malaysia under three selected past earthquakes excitations ; El Centro 1940 North-South, El Centro East-West components and San Fernando 1971 using RUAUMOKO 2D program. This program is fully utilized by using prototype precast school model and dynamic non-linear time history analysis. From the results, it can be concluded that two-storey precast school building has experienced severe damage and partial collapse especially at beam-column joint under San Fernando and El Centro North-South Earthquake as its exceeds the allowable inter-storey drift and displacement as specified in Eurocode 8. The San Fernando earthquake has produced a massive destruction to the precast building under viscous damping, ξ = 5% and this building has generated maximum building displacement of 435mm, maximum building drift of 0.68% and maximum bending moment at 8458kNm.

Modeling of two-storey precast school building using Ruaumoko 2D program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hamid, N. H.; Tarmizi, L. H.; Ghani, K. D.

The long-distant earthquake loading from Sumatra and Java Island had caused some slight damages to precast and reinforced concrete buildings in West Malaysia such as cracks on wall panels, columns and beams. Subsequently, the safety of existing precast concrete building is needed to be analyzed because these buildings were designed using BS 8110 which did not include the seismic loading in the design. Thus, this paper emphasizes on the seismic performance and dynamic behavior of precast school building constructed in Malaysia under three selected past earthquakes excitations ; El Centro 1940 North-South, El Centro East-West components and San Fernando 1971more » using RUAUMOKO 2D program. This program is fully utilized by using prototype precast school model and dynamic non-linear time history analysis. From the results, it can be concluded that two-storey precast school building has experienced severe damage and partial collapse especially at beam-column joint under San Fernando and El Centro North-South Earthquake as its exceeds the allowable inter-storey drift and displacement as specified in Eurocode 8. The San Fernando earthquake has produced a massive destruction to the precast building under viscous damping, ξ = 5% and this building has generated maximum building displacement of 435mm, maximum building drift of 0.68% and maximum bending moment at 8458kNm.« less

Tanko Bushi: Designing a Japanese-American Dance Experience

ERIC Educational Resources Information Center

Sweeting, Terry; Werner, Peter; Williams, Lori H.; Crump, Alyssa

2012-01-01

Many folk dances reflect the everyday activities of the people, celebrating the commonplace through physical forms of expression. The traditional Japanese folk dance, Tanko Bushi, is still performed in Japan and among Japanese-Americans today, and its theme of coal mining makes it relatable to many cultures around the world. With its traditional…

Business Communication Needs of Japanese Companies in Malaysia

ERIC Educational Resources Information Center

Su, Yeoh Lee; Mahadi, Tengku Sepora Tengku; Singh, Manjet Kaur Mehar

2016-01-01

Business relationship between Japan and Malaysia has developed very quickly in recent years. This has caused a dramatic increase in the need for individuals who possess language skills to function in Japanese businesses. In order to investigate the needs of our Malaysian graduates, a survey was conducted involving graduates of Japanese language…

Video Game Play in British and Japanese Adolescents

ERIC Educational Resources Information Center

Colwell, John; Kato, Makiko

2005-01-01

Results from research into negative correlates of computer/video game play in the United Kingdom and in Japan are presented, with new analyses across cultures. Patterns of play are similar, although Japanese adolescents have been playing for longer, they play fewer aggressive games, and there is greater perceived concern by Japanese parents.…

Reliability and Validity of Prototype Diagnosis for Adolescent Psychopathology.

PubMed

Haggerty, Greg; Zodan, Jennifer; Mehra, Ashwin; Zubair, Ayyan; Ghosh, Krishnendu; Siefert, Caleb J; Sinclair, Samuel J; DeFife, Jared

2016-04-01

The current study investigated the interrater reliability and validity of prototype ratings of 5 common adolescent psychiatric disorders: attention-deficit/hyperactivity disorder, conduct disorder, major depressive disorder, generalized anxiety disorder, and posttraumatic stress disorder. One hundred fifty-seven adolescent inpatient participants consented to participate in this study. We compared ratings from 2 inpatient clinicians, blinded to each other's ratings and patient measures, after their separate initial diagnostic interview to assess interrater reliability. Prototype ratings completed by clinicians after their initial diagnostic interview with adolescent inpatients and outpatients were compared with patient-reported behavior problems and parents' report of their child's behavioral problems. Prototype ratings demonstrated good interrater reliability. Clinicians' prototype ratings showed predicted relationships with patient-reported behavior problems and parent-reported behavior problems. Prototype matching seems to be a possible alternative for psychiatric diagnosis. Prototype ratings showed good interrater reliability based on clinicians unique experiences with the patient (as opposed to video-/audio-recorded material) with no training.

Cost Effective Prototyping

NASA Technical Reports Server (NTRS)

Wickman, Jerry L.; Kundu, Nikhil K.

1996-01-01

This laboratory exercise seeks to develop a cost effective prototype development. The exercise has the potential of linking part design, CAD, mold development, quality control, metrology, mold flow, materials testing, fixture design, automation, limited parts production and other issues as related to plastics manufacturing.

3D Virtual Environment Used to Support Lighting System Management in a Building

NASA Astrophysics Data System (ADS)

Sampaio, A. Z.; Ferreira, M. M.; Rosário, D. P.

The main aim of the research project, which is in progress at the UTL, is to develop a virtual interactive model as a tool to support decision-making in the planning of construction maintenance and facilities management. The virtual model gives the capacity to allow the user to transmit, visually and interactively, information related to the components of a building, defined as a function of the time variable. In addition, the analysis of solutions for repair work/substitution and inherent cost are predicted, the results being obtained interactively and visualized in the virtual environment itself. The first component of the virtual prototype concerns the management of lamps in a lighting system. It was applied in a study case. The interactive application allows the examination of the physical model, visualizing, for each element modeled in 3D and linked to a database, the corresponding technical information concerned with the use of the material, calculated for different points in time during their life. The control of a lamp stock, the constant updating of lifetime information and the planning of periodical local inspections are attended on the prototype. This is an important mean of cooperation between collaborators involved in the building management.

Japanese Americans: The Evolution of a Subculture. Ethnic Groups in American Life Series.

ERIC Educational Resources Information Center

Kitano, Harry H. L.

Japanese-American accomplishments are a logical outcome of Japanese-American culture and institutions, but, more importantly, of the energy and spirit of the hundreds of thousands of Japanese, some prominent figures now, who have made places for themselves in the American society. Nevertheless, the Japanese-American, like any American, must adapt…

[Study of Japanese anatomical terms, such as 'sphenoid bone'].

PubMed

Sawai, Tadashi

2008-12-01

Japanese anatomical terms (butterfly-shaped bone) have an interesting history. Galen named a bone (wedge-like). This Greek term was introduced into Latin anatomical texts by transcribing into 'os sphnoides' or translating it as 'os cuneiforme'. Both terms mean equally wedge-like bone. From 16th century on, these two terms prevailed in European anatomical textbooks, but in 18th century some anatomists merged this bone with some kinds of winged creatures and named their wings "Ala major' and 'Ala minor'. In mid-19th century English-Chinese anatomical book, this bone was named (butterfly bone) by a medical missionary Benjamin Hobson. This term was introduced into Japanese textbooks. In Meiji Era both terms were used in Japanese textbooks, and (wedged-like bone). Some anatomists insisted on using because this echoed original Latin term's sense. Eventually, Japanese Associations of Anatomists adopted in 1943.

Scout: An Impact Analysis Tool for Building Energy-Efficiency Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harris, Chioke; Langevin, Jared; Roth, Amir

Evaluating the national impacts of candidate U.S. building energy-efficiency technologies has historically been difficult for organizations with large energy efficiency portfolios. In particular, normalizing results from technology-specific impact studies is time-consuming when those studies do not use comparable assumptions about the underlying building stock. To equitably evaluate its technology research, development, and deployment portfolio, the U.S. Department of Energy's Building Technologies Office has developed Scout, a software tool that quantitatively assesses the energy and CO2 impacts of building energy-efficiency measures on the national building stock. Scout efficiency measures improve upon the unit performance and/or lifetime operational costs of an equipmentmore » stock baseline that is determined from the U.S. Energy Information Administration Annual Energy Outlook (AEO). Scout measures are characterized by a market entry and exit year, unit performance level, cost, and lifetime. To evaluate measures on a consistent basis, Scout uses EnergyPlus simulation on prototype building models to translate measure performance specifications to whole-building energy savings; these savings impacts are then extended to a national scale using floor area weighting factors. Scout represents evolution in the building stock over time using AEO projections for new construction, retrofit, and equipment replacements, and competes technologies within market segments under multiple adoption scenarios. Scout and its efficiency measures are open-source, as is the EnergyPlus whole building simulation framework that is used to evaluate measure performance. The program is currently under active development and will be formally released once an initial set of measures has been analyzed and reviewed.« less

The fine-scale genetic structure and evolution of the Japanese population.

PubMed

Takeuchi, Fumihiko; Katsuya, Tomohiro; Kimura, Ryosuke; Nabika, Toru; Isomura, Minoru; Ohkubo, Takayoshi; Tabara, Yasuharu; Yamamoto, Ken; Yokota, Mitsuhiro; Liu, Xuanyao; Saw, Woei-Yuh; Mamatyusupu, Dolikun; Yang, Wenjun; Xu, Shuhua; Teo, Yik-Ying; Kato, Norihiro

2017-01-01

The contemporary Japanese populations largely consist of three genetically distinct groups-Hondo, Ryukyu and Ainu. By principal-component analysis, while the three groups can be clearly separated, the Hondo people, comprising 99% of the Japanese, form one almost indistinguishable cluster. To understand fine-scale genetic structure, we applied powerful haplotype-based statistical methods to genome-wide single nucleotide polymorphism data from 1600 Japanese individuals, sampled from eight distinct regions in Japan. We then combined the Japanese data with 26 other Asian populations data to analyze the shared ancestry and genetic differentiation. We found that the Japanese could be separated into nine genetic clusters in our dataset, showing a marked concordance with geography; and that major components of ancestry profile of Japanese were from the Korean and Han Chinese clusters. We also detected and dated admixture in the Japanese. While genetic differentiation between Ryukyu and Hondo was suggested to be caused in part by positive selection, genetic differentiation among the Hondo clusters appeared to result principally from genetic drift. Notably, in Asians, we found the possibility that positive selection accentuated genetic differentiation among distant populations but attenuated genetic differentiation among close populations. These findings are significant for studies of human evolution and medical genetics.

The fine-scale genetic structure and evolution of the Japanese population

PubMed Central

Katsuya, Tomohiro; Kimura, Ryosuke; Nabika, Toru; Isomura, Minoru; Ohkubo, Takayoshi; Tabara, Yasuharu; Yamamoto, Ken; Yokota, Mitsuhiro; Liu, Xuanyao; Saw, Woei-Yuh; Mamatyusupu, Dolikun; Yang, Wenjun; Xu, Shuhua

2017-01-01

The contemporary Japanese populations largely consist of three genetically distinct groups—Hondo, Ryukyu and Ainu. By principal-component analysis, while the three groups can be clearly separated, the Hondo people, comprising 99% of the Japanese, form one almost indistinguishable cluster. To understand fine-scale genetic structure, we applied powerful haplotype-based statistical methods to genome-wide single nucleotide polymorphism data from 1600 Japanese individuals, sampled from eight distinct regions in Japan. We then combined the Japanese data with 26 other Asian populations data to analyze the shared ancestry and genetic differentiation. We found that the Japanese could be separated into nine genetic clusters in our dataset, showing a marked concordance with geography; and that major components of ancestry profile of Japanese were from the Korean and Han Chinese clusters. We also detected and dated admixture in the Japanese. While genetic differentiation between Ryukyu and Hondo was suggested to be caused in part by positive selection, genetic differentiation among the Hondo clusters appeared to result principally from genetic drift. Notably, in Asians, we found the possibility that positive selection accentuated genetic differentiation among distant populations but attenuated genetic differentiation among close populations. These findings are significant for studies of human evolution and medical genetics. PMID:29091727

Language as Fluid: A Description of the Conduit Metaphor in Japanese.

ERIC Educational Resources Information Center

Nomura, Masuhiro

1993-01-01

The question of how 'communication' is metaphorized in Japanese is examined and this metaphorization is contrasted with Reddy's (1979) conduit metaphor. A claim is made that there is a strong tendency for Japanese to conceptualize 'word' as 'fluid' and to fuse 'word' and 'meaning.' English, which unlike Japanese, has overt count/mass and…

The open prototype for educational NanoSats: Fixing the other side of the small satellite cost equation

NASA Astrophysics Data System (ADS)

Berk, Josh; Straub, Jeremy; Whalen, David

Government supported nano-satellite launch programs and emerging commercial small satellite launch services are reducing the cost of access to space for educational and other CubeSat projects. The cost and complexity of designing and building these satellites remains a vexing complication for many would be CubeSat aspirants. The Open Prototype for Educational NanoSats (OPEN), a proposed nano-satellite development platform, is described in this paper. OPEN endeavors to reduce the costs and risks associated with educational, government and commercial nano-satellite development. OPEN provides free and publicly available plans for building, testing and operating a versatile, low-cost satellite, based on the standardized CubeSat form-factor. OPEN consists of public-domain educational reference plans, complete with engineering schematics, CAD files, construction and test instructions as well as ancillary reference materials relevant to satellite building and operation. By making the plan, to produce a small but capable spacecraft freely available, OPEN seeks to lower the barriers to access on the other side (non-launch costs) of the satellite cost equation.

In Vivo Demonstration of a Self-Sustaining, Implantable, Stimulated-Muscle-Powered Piezoelectric Generator Prototype

PubMed Central

Lewandowski, B. E.; Kilgore, K. L.; Gustafson, K. J.

2010-01-01

An implantable, stimulated-muscle-powered piezoelectric active energy harvesting generator was previously designed to exploit the fact that the mechanical output power of muscle is substantially greater than the electrical power necessary to stimulate the muscle’s motor nerve. We reduced to practice the concept by building a prototype generator and stimulator. We demonstrated its feasibility in vivo, using rabbit quadriceps to drive the generator. The generated power was sufficient for self-sustaining operation of the stimulator and additional harnessed power was dissipated through a load resistor. The prototype generator was developed and the power generating capabilities were tested with a mechanical muscle analog. In vivo generated power matched the mechanical muscle analog, verifying its usefulness as a test-bed for generator development. Generator output power was dependent on the muscle stimulation parameters. Simulations and in vivo testing demonstrated that for a fixed number of stimuli/minute, two stimuli applied at a high frequency generated greater power than single stimuli or tetanic contractions. Larger muscles and circuitry improvements are expected to increase available power. An implanted, self-replenishing power source has the potential to augment implanted battery or transcutaneously powered electronic medical devices. PMID:19657742

Sex and cultural differences in spatial performance between Japanese and North Americans.

PubMed

Sakamoto, Maiko; Spiers, Mary V

2014-04-01

Previous studies have suggested that Asians perform better than North Americans on spatial tasks but show smaller sex differences. In this study, we evaluated the relationship between long-term experience with a pictorial written language and spatial performance. It was hypothesized that native Japanese Kanji (a complex pictorial written language) educated adults would show smaller sex differences on spatial tasks than Japanese Americans or North Americans without Kanji education. A total of 80 young healthy participants (20 native Japanese speakers, 20 Japanese Americans-non Japanese speaking, and 40 North Americans-non Japanese speaking) completed the Rey Complex Figure Test (RCFT), the Mental Rotations Test (MRT), and customized 2D and 3D spatial object location memory tests. As predicted, main effects revealed men performed better on the MRT and RCFT and women performed better on the spatial object location memory tests. Also, as predicted, native Japanese performed better on all tests than the other groups. In contrast to the other groups, native Japanese showed a decreased magnitude of sex differences on aspects of the RCFT (immediate and delayed recall) and no significant sex difference on the efficiency of the strategy used to copy and encode the RCFT figure. This study lends support to the idea that intensive experience over time with a pictorial written language (i.e., Japanese Kanji) may contribute to increased spatial performance on some spatial tasks as well as diminish sex differences in performance on tasks that most resemble Kanji.

Prototype of smart office system using based security system

NASA Astrophysics Data System (ADS)

Prasetyo, T. F.; Zaliluddin, D.; Iqbal, M.

2018-05-01

Creating a new technology in the modern era gives a positive impact on business and industry. Internet of Things (IoT) as a new communication technology is very useful in realizing smart systems such as: smart home, smart office, smart parking and smart city. This study presents a prototype of the smart office system which was designed as a security system based on IoT. Smart office system development method used waterfall model. IoT-based smart office system used platform (project builder) cayenne so that. The data can be accessed and controlled through internet network from long distance. Smart office system used arduino mega 2560 microcontroller as a controller component. In this study, Smart office system is able to detect threats of dangerous objects made from metals, earthquakes, fires, intruders or theft and perform security monitoring outside the building by using raspberry pi cameras on autonomous robots in real time to the security guard.

Construction and reliability of the Japanese version of the Adolescent Egocentrism-Sociocentrism (AES) scale and its preliminary application in the Japanese university students.

PubMed

Yamamoto, Mayumi; Tomotake, Masahito; Ohmori, Tetsuro

2008-08-01

In recent years, the problem of interpersonal relationships has been reported to be associated with various adolescent psychiatric problems. Egocentrism is one factor related to the problem of interpersonal relationships. The Adolescent Egocentrism-Sociocentrism (AES) scale is used to assess egocentrism in Western countries, but no such scale has been developed in Japan. The purpose of our current study was to develop the Japanese version of the AES scale and investigate the relationship between the egocentrism assessed by the AES scale and the self-consciousness assessed by the Japanese version of the self-consciousness scale. The original version of the AES scale was first translated into Japanese using the forward-backward method and examined for factorial reliability and validity. The results demonstrated that the Japanese version of the AES scale shows adequate factorial reliability and validity, but different from the original version the "egocentrism personal fable" subscale which measures the feeling that oneself is special and unique was not extracted in the Japanese version. We found a moderate correlation between the non-social focuses of the AES scale and the public self-consciousness subscale of the self-consciousness scale. This correlation suggests that a strong attention of others' view on oneself results in the avoidance of others. The Japanese version of the AES scale can examine egocentrism adequately together with sociocentrism and non-social focuses. As this scale is self-reporting and easy to complete, it may have practical utility in a clinical setting.

Skills and Life Strategies of Japanese Business Women.

ERIC Educational Resources Information Center

Iwao, Sumiko

In this paper, case studies of two successful Japanese businesswomen illustrate how traditional Japanese cultural values and female sex roles have enabled women to succeed in business. These two cases were chosen as representative from a sample of 56. The businesses discussed are in very different sectors of the economy. One is a traditional and…

Prototype diagnosis of psychiatric syndromes

PubMed Central

WESTEN, DREW

2012-01-01

The method of diagnosing patients used since the early 1980s in psychiatry, which involves evaluating each of several hundred symptoms for their presence or absence and then applying idiosyncratic rules for combining them for each of several hundred disorders, has led to great advances in research over the last 30 years. However, its problems have become increasingly apparent, particularly for clinical practice. An alternative approach, designed to maximize clinical utility, is prototype matching. Instead of counting symptoms of a disorder and determining whether they cross an arbitrary cutoff, the task of the diagnostician is to gauge the extent to which a patient’s clinical presentation matches a paragraph-length description of the disorder using a simple 5-point scale, from 1 (“little or no match”) to 5 (“very good match”). The result is both a dimensional diagnosis that captures the extent to which the patient “has” the disorder and a categorical diagnosis, with ratings of 4 and 5 corresponding to presence of the disorder and a rating of 3 indicating “subthreshold” or “clinically significant features”. The disorders and criteria woven into the prototypes can be identified empirically, so that the prototypes are both scientifically grounded and clinically useful. Prototype diagnosis has a number of advantages: it better captures the way humans naturally classify novel and complex stimuli; is clinically helpful, reliable, and easy to use in everyday practice; facilitates both dimensional and categorical diagnosis and dramatically reduces the number of categories required for classification; allows for clinically richer, empirically derived, and culturally relevant classification; reduces the gap between research criteria and clinical knowledge, by allowing clinicians in training to learn a small set of standardized prototypes and to develop richer mental representations of the disorders over time through clinical experience; and can help

Mapping Japanese medical terms to UMLS Metathesaurus.

PubMed

Onogi, Yuzo; Ohe, Kazuhiko; Tanaka, Masaaki; Nozoe, Atsutake; Sasaki, Tetsuro; Sato, Megumi; Kikuchi, Yuko; Shinohara, Tsuneki; Suzuki, Hiromichi; Kaihara, Shigekoto; Seyama, Yousuke

2004-01-01

This paper introduces and reports the results for a project to map Japanese medical terms to the UMLS Metathesaurus. The "Thesaurus for Medical and Health related Terms version 5" published in 2003 by the Japan Medical Abstracts Society and UMLS version 2002AC provided by NLM were used in this study. The goal was to judge the validity of the correlation between the Japanese and English terms that belong to the same MeSH concept. Fifteen medicine, nursing, and library science professionals, excluding JAMAS, used a custom designed Web interface to perform this task. About 10% of the concepts were judged as invalid, and the reasoning behind these failures were analyzed. Experience from this project can be used to estimate the manpower required to revise the Japanese thesaurus after future revisions to UMLS or MeSH.

BCube: Building a Geoscience Brokering Framework

NASA Astrophysics Data System (ADS)

Jodha Khalsa, Siri; Nativi, Stefano; Duerr, Ruth; Pearlman, Jay

2014-05-01

BCube is addressing the need for effective and efficient multi-disciplinary collaboration and interoperability through the advancement of brokering technologies. As a prototype "building block" for NSF's EarthCube cyberinfrastructure initiative, BCube is demonstrating how a broker can serve as an intermediary between information systems that implement well-defined interfaces, thereby providing a bridge between communities that employ different specifications. Building on the GEOSS Discover and Access Broker (DAB), BCube will develop new modules and services including: • Expanded semantic brokering capabilities • Business Model support for work flows • Automated metadata generation • Automated linking to services discovered via web crawling • Credential passing for seamless access to data • Ranking of search results from brokered catalogs Because facilitating cross-discipline research involves cultural and well as technical challenges, BCube is also addressing the sociological and educational components of infrastructure development. We are working, initially, with four geoscience disciplines: hydrology, oceans, polar and weather, with an emphasis on connecting existing domain infrastructure elements to facilitate cross-domain communications.

Japanese Terms of Address: Some Usages of the First and Second Person Pronouns. Papers in Japanese Linguistics, Vol. 1, No. 2.

ERIC Educational Resources Information Center

Kurokawa, Shozo

This paper examines the following points: (1) how Japanese personal pronouns are used according to the speakers' social constraints, and (2) differences between males and females of the same occupational group in their use of personal pronouns. The dialect analyzed is the speech of Japanese faculty members at the University of Hawaii. A speaker of…

Daily Life in Japanese High Schools. ERIC Digest.

ERIC Educational Resources Information Center

Johnson, Marcia L.; Johnson, Jeffrey R.

This ERIC Digest asserts that the Japanese education system is one of the most influential agents molding Japanese youth. This influence is especially great due to the large amount of time students spend in schools. Six topics examine aspects of daily high school life: (1) Getting to School; (2) At School; (3) Extracurricular Activities; (4)…

Bumping into Someone: Japanese Students' Perceptions and Observations

ERIC Educational Resources Information Center

Lieske, Carmella

2010-01-01

This pilot study explores the apologies Japanese nursing college students thought they would use in their L1 (i.e. Japanese) and their L2 (i.e. English) when bumping into each other. The students completed a questionnaire, the results of which indicated that they believed they should always apologize for bumping into someone. The paper describes…

The decline in BMI among Japanese women after World War II.

PubMed

Maruyama, Shiko; Nakamura, Sayaka

2015-07-01

The body mass index (BMI) of the Japanese is significantly lower than is found in other high-income countries. Moreover, the average BMI of Japanese women is lower than that of Japanese men, and the age-specific BMI of Japanese women has decreased over time. The average BMI of Japanese women at age 25 decreased from 21.8 in 1948 to 20.4 in 2010 whereas that of men increased from 21.4 to 22.3 over the same period. We examine the long-term BMI trend in Japan by combining several historical data sources spanning eleven decades, from 1901 to 2012, to determine not only when but also how the BMI decline among women began: whether its inception was period-specific or cohort-specific. Our nonparametric regression analysis generated five findings. First, the BMI of Japanese women peaked with the 1930s birth cohort. This means that the trend is cohort-specific. Second, the BMI of men outpaced that of women in the next cohort. Third, the BMI of Japanese children, boys and girls alike, increased steadily throughout the 20th century. Fourth, the gender difference in the BMI trend is due to a gender difference in the weight trend, not the height trend. Fifth, these BMI trends are observed in urban and rural populations alike. We conclude that the BMI decline among Japanese women began with those who were in their late teens shortly after World War II. Copyright © 2015 Elsevier B.V. All rights reserved.

Development of automated prototype for studying the effect of solar aging on sunglasses

NASA Astrophysics Data System (ADS)

Gomes, L. M.; Ventura, L.

2015-06-01

The first Brazilian standard for UV protection sunglasses, NBR15111, was drafted and published in 2003, hitherto a faithful copy (mirror) of European, BSEN1836 standard. From 2010 to 2013 the Laboratório de Instrumentação Oftálmica of the School of Engineering of São Carlos (USP) made contribution in the review and drafting of this standard and the main change so far is on the extension of the UV range analysis for protection of sunglasses, i.e. from 280 - 380nm to 280-400nm. In previous studies, there are indications that ultraviolet protection degrades with use and exposure of sunglasses to natural ultraviolet radiation. Thus, this project aims to build a prototype for irradiating sunglasses lenses, where one of the spectacles will be submitted to the solar simulator; and the other to the prototype. This prototype consists of a panel with cover, which houses 100 lenses arranged in the vertical (user's) position and which will be irradiated by the sun from sunrise until sunset. The lid opens automatically and should turn towards the sun, so that the lens will always be irradiated facing the sun. Sensors will be installed to close the cover and protect the lenses of undesirable weather conditions and to determine the ultraviolet index to which the lenses are being subjected to. The exposure time and UV index will be recorded and automatic opening or closing the lid may also be interfered by a PC by online software. Previously to irradiation, spectroscopy will be performed and then repeated after every 30 days of exposure.

C3I Rapid Prototype Investigation.

DTIC Science & Technology

1986-01-01

feasibility of applying rapid K prototyping techniques to Air Force C3 1 system developments . This report presents the technical progress during the...computer tunctions. The cost to use each in terms of hardware, software, analysis, and needed further developments was assessed. Prototyping approaches were...acquirer, and developer are the ". basis for problems in C3I system developments . These problems destabilize r-. the requirements determination process

Customer-experienced rapid prototyping

NASA Astrophysics Data System (ADS)

Zhang, Lijuan; Zhang, Fu; Li, Anbo

2008-12-01

In order to describe accurately and comprehend quickly the perfect GIS requirements, this article will integrate the ideas of QFD (Quality Function Deployment) and UML (Unified Modeling Language), and analyze the deficiency of prototype development model, and will propose the idea of the Customer-Experienced Rapid Prototyping (CE-RP) and describe in detail the process and framework of the CE-RP, from the angle of the characteristics of Modern-GIS. The CE-RP is mainly composed of Customer Tool-Sets (CTS), Developer Tool-Sets (DTS) and Barrier-Free Semantic Interpreter (BF-SI) and performed by two roles of customer and developer. The main purpose of the CE-RP is to produce the unified and authorized requirements data models between customer and software developer.

Rapid Prototyping in Instructional Design: Creating Competencies

ERIC Educational Resources Information Center

Fulton, Carolyn D.

2010-01-01

Instructional designers working in rapid prototyping environments currently do not have a list of competencies that help to identify the knowledge, skills, and attitudes (KSAs) required in these workplaces. This qualitative case study used multiple cases in an attempt to identify rapid prototyping competencies required in a rapid prototyping…