Radiology Technician (AFSC 90370).
ERIC Educational Resources Information Center
Sobczak, James
This five-volume student text is designed for use by Air Force personnel enrolled in a self-study extension course for radiology technicians. Covered in the individual volumes are radiographic fundamentals (x-ray production; primary beams; exposure devices; film, film holders, and darkrooms; control of film quality; and environmental safety);…
Dabadie, A; Soussan, J; Mancini, J; Vidal, V; Bartoli, J M; Gorincour, G; Petit, P
2016-09-01
The goals of this study were to develop and evaluate a joint theoretical/practical training course for radiology residents and technicians and to start a collaborative practice agreement enabling radiology technicians to perform PICC placement under the responsibility of an interventional radiologist. A joint training session based on literature evidences and international recommendations was designed. Participants were assessed before and after training, and were also asked to evaluate the program one month after completion of the training course. Practical post-training mentoring guidelines were laid down for radiologists supervising technicians. From January to April 2014, 6 radiology residents and 12 radiology technicians from the two interventional radiology departments of the University hospitals in Marseille took part in the training program. For both residents and technicians, significant improvement was observed between pretraining and post-training assessment. The majority of participants were satisfied with the program. Our experience suggests that combined theoretical and practical training in PICC placement allows improving technical skill and yields high degrees of satisfaction for both radiology residents and technicians. A collaborative practice agreement is now formally established to enable radiologists to delegate PICC placement procedures to radiology technicians. Copyright © 2016 Éditions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.
Giorgini, Giulia; Mesto, Anna; Soardo, Vincenzo
2013-01-01
Tuberculosis (TB) affects more than two billion people worldwide. In hospitals, the presence of suspect cases of infectious TB should be reported as quickly as possible. An anonymous questionnaire was administered to a sample of radiology technicians employed by several local health departments in Italy. The questionnaire contained questions regarding workplace characteristics, knowledge about precautions for preventing disease transmission, degree of collaboration between health professionals and departments regarding communicable diseases. Study results point to the presence of structural and organizational weaknesses as well as inadequate communication between healthcare workers and units. Eighty percent of surveyed technicians stated that patients with suspected TB may arrive in diagnostic radiology wards devoid of surgical mask. The authors suggest the adoption of a checklist to aid healthcare professionals and specifically X-Ray technicians in adopting a behavioral model for the management of patients with infectious TB.
Yagahara, Ayako; Tsuji, Shintaro; Hukuda, Akihisa; Nishimoto, Naoki; Ogasawara, Katsuhiko
2016-03-01
The purpose of this study is to investigate the differences in the notation of technical terms and their meanings among three terminologies in Japanese radiology-related societies. The three terminologies compared in this study were "radiological technology terminology" and its supplement published by the Japan Society of Radiological Technology, "medical physics terminology" published by the Japan Society of Medical Physics, and "electric radiation terminology" published by the Japan Radiological Society. Terms were entered into spreadsheets and classified into the following three categories: Japanese notation, English notation, and meanings. In the English notation, terms were matched to character strings in the three terminologies and were extracted and compared. The Japanese notations were compared among three terminologies, and the difference between the meanings of the two terminologies radiological technology terminology and electric radiation terminology were compared. There were a total of 14,982 terms in the three terminologies. In English character strings, 2,735 terms were matched to more than two terminologies, with 801 of these terms matched to all the three terminologies. Of those terms in English character strings matched to three terminologies, 752 matched to Japanese character strings. Of the terms in English character strings matched to two terminologies, 1,240 matched to Japanese character strings. With regard to the meanings category, eight terms had mismatched meanings between the two terminologies. For these terms, there were common concepts between two different meaning terms, and it was considered that the derived concepts were described based on domain.
The number of Japanese radiologic technologists will be increased in 40 years.
Araseki, Miwa; Yokooka, Yuki; Ishikawa, Tomoki; Ogasawara, Katsuhiko
2013-07-01
It is essential to predict the long-term supply and demand for the number of radiologic technologists as medical resources. However, it is difficult to predict the number of Japanese radiologic technologists due to complex and intertwining factors. Our purpose in this study was to predict the future number of radiologic technologists using the concept of system dynamics (SD), and to clarify the effects of relevant factors. In order to estimate the number of Japanese radiologic technologists, we constructed a flow diagram using the concept of SD. We simulated the number of radiologic technologists for the following 4 cases: maintaining the status quo, a change in the pass rate for the national examination, a change in the post-graduate employment rate, and a change in the rate of continuing education. The result for the predicted number of radiologic technologists was 50,509 in 20 years, which is 4,394 (9.5%) more than the present number, and 50,166 in 40 years, which is 4,051 (8.8%) more than the present number. For the factors influencing the number of technologists, the influence of the pass rate on the national examination and that of the rate for post-graduate employment was larger than that of the rate of continuing education in graduate school. The number of Japanese radiologic technologists will increase until 2033 and decrease until 2042, and it does not change after 2042 in case of maintaining the status quo. Implementing the concept of SD allowed us easily to clarify the factors influencing the predicted number of radiologic technologists.
The essence of the Japan Radiological Society/Japanese College of Radiology Imaging Guideline.
Yamashita, Yasuyuki; Murayama, Sadayuki; Okada, Masahiro; Watanabe, Yoshiyuki; Kataoka, Masako; Kaji, Yasushi; Imamura, Keiko; Takehara, Yasuo; Hayashi, Hiromitsu; Ohno, Kazuko; Awai, Kazuo; Hirai, Toshinori; Kojima, Kazuyuki; Sakai, Shuji; Matsunaga, Naofumi; Murakami, Takamichi; Yoshimitsu, Kengo; Gabata, Toshifumi; Matsuzaki, Kenji; Tohno, Eriko; Kawahara, Yasuhiro; Nakayama, Takeo; Monzawa, Shuichi; Takahashi, Satoru
2016-01-01
Diagnostic imaging is undoubtedly important in modern medicine, and final clinical decisions are often made based on it. Fortunately, Japan has the highest numbers of diagnostic imaging instruments, such as CT and MRI devices, and boasts easy access to them as well as a high level of diagnostic accuracy. In consequence, a very large number of imaging examinations are performed, but diagnostic instruments are installed in so many medical facilities that expert management of these examinations tends to be insufficient. Particularly, in order to avoid risks, clinicians have recently become indifferent to indications of imaging modalities and tend to rely on CT or MRI resulting in increasing the number of imaging examinations in Japan. This is a serious problem from the viewpoints of avoidance of unnecessary exposure and medical economy. Under these circumstances, the Japan Radiological Society and Japanese College of Radiology jointly initiated the preparation of new guidelines for diagnostic imaging. However, the field of diagnostic imaging is extremely wide, and it is impossible to cover all diseases. Therefore, in drafting the guidelines, we selected important diseases and focused on "showing evidence and suggestions in the form of clinical questions (CQs)" concerning clinically encountered questions and "describing routine imaging techniques presently considered to be standards to guarantee the quality of imaging examinations". In so doing, we adhered to the basic principles of assuming the readers to be "radiologists specializing in diagnostic imaging", "simultaneously respecting the global standards and attending to the situation in Japan", and "making the guidelines consistent with those of other scientific societies related to imaging". As a result, the guidelines became the largest ever, consisting of 152 CQs, nine areas of imaging techniques, and seven reviews, but no other guidelines in the world summarize problems concerning diagnostic imaging in the form
[Dentistry in Korean during the Japanese occupation].
Shin, Jae-Eu
2004-12-01
The Japanese introduction of dentistry into Korea was for treating the Japanese residing in Korea Noda-Oji was the first Japanese dentist for Japanese people in Korea in 1893, and Narajaki doyoyo, an invited dentist was posted in the Korean headquarter of Japanese army in September, 1905. The imperialist Japan licensed the dental technicians (yipchisa) without limit and controlled them generously so they could practice dentistry freely. This measure was contrary to that in Japan. (In Japan no new dental technician was licensed.) Komori, a dental technician opened his laboratory at Chungmuro in 1902. The dental technician had outnumbered by 1920. In 1907, the first Korean dental technician Sung-Ryong Choi practiced dentistry in Jongno. The imperialist Japan made the regulations for dental technicians to set a limit to the advertisement and medical practice of dental technicians. The first Korean dentists Suk-Tae Ham was register No. 1 in the dentist license. The Kyungsung dental school was established by Nagira Dasoni for the purpose of educating some Korean people that contributed to Japanese colonization. It made progress with the help of Japan, it was was given the approval of the establishment of the professional school in January the 25th, 1929. It was intended to produce Korean dentists in the first place but became the school for Japanese students later on. The association of Chosun dentist, which had been founded by Narajaki doyoyo, was managed by Japanese dentists in favor of the colonial ruling. The Hansung Association of Dentists established in 1925 was the organization made by the necessity of the association for Koreans only. The Japanese forcefully annexed the Association of Hansung Dentists (Koreans only) to the Association of Kyungsung Dentists to avoid collective actions of Korean dentists in the name of 'Naesunilche' -- 'Japan and Korea and one'. Their invading intention was shown in the event of 'decayed tooth preventive day'. Japanese controlled
Intraoperative monitoring technician: a new member of the surgical team.
Brown, Molly S; Brown, Debra S
2011-02-01
As surgery needs have increased, the traditional surgical team has expanded to include personnel from radiology and perfusion services. A new surgical team member, the intraoperative monitoring technician, is needed to perform intraoperative monitoring during procedures that carry a higher risk of central and peripheral nerve injury. Including the intraoperative monitoring technician on the surgical team can create challenges, including surgical delays and anesthesia care considerations. When the surgical team members, including the surgeon, anesthesia care provider, and circulating nurse, understand and facilitate this new staff member's responsibilities, the technician is able to perform monitoring functions that promote the smooth flow of the surgical procedure and positive patient outcomes. Copyright © 2011 AORN, Inc. Published by Elsevier Inc. All rights reserved.
Radiology image orientation processing for workstation display
NASA Astrophysics Data System (ADS)
Chang, Chung-Fu; Hu, Kermit; Wilson, Dennis L.
1998-06-01
Radiology images are acquired electronically using phosphor plates that are read in Computed Radiology (CR) readers. An automated radiology image orientation processor (RIOP) for determining the orientation for chest images and for abdomen images has been devised. In addition, the chest images are differentiated as front (AP or PA) or side (Lateral). Using the processing scheme outlined, hospitals will improve the efficiency of quality assurance (QA) technicians who orient images and prepare the images for presentation to the radiologists.
Autret, A; Choupeaux, D; Le Mée, M
2016-10-01
Tomotherapy is a technique of IMRT and IGRT using a linear accelerator and a helical CT-scanner. To reach this targeting of precision, the repositioning of the patient is essential. The use of a contention adapted according to the location of the disease and the morphology of the patient is necessary for the safety of this one and the treatment. Once the patient positioned on the reference table, technicians of imager's team check by the acquisition of helical imagery with the reference CT-scanner the position of the patient, the zone of the PTV and healthy organs in the protected surroundings. At first, adjustment will be made automatically on three planes of the space (axial, sagittal, frontal) and three rotations (pitch, roll and yaw) by the device of treatment, then the technicians of imagery will bring a modification of these recalls manually. After validation, the processing will then be made in complete safety for the patient and the nursing. This check by MVCT is daily before every session of processing. It is made by the technicians of imagery. The radiation oncologist confirms the images at j0, then controls once a week MVCT. Traceability in the file of the patient of the various marks (osseous and\\or soft tissue) necessary for the daily gaps will be noted by this one to delegate to the technicians of imagery the validation of the MVCT before every session. Copyright © 2016. Published by Elsevier SAS.
ERIC Educational Resources Information Center
Tech Directions, 2010
2010-01-01
Forensic science technicians, also called crime laboratory technicians or police science technicians, help solve crimes. They examine and identify physical evidence to reconstruct a crime scene. This article discusses everything students need to know about careers for forensic science technicians--wages, responsibilities, skills needed, career…
Data analyst technician: an innovative role for the pharmacy technician.
Ervin, K C; Skledar, S; Hess, M M; Ryan, M
2001-10-01
The development of an innovative role for the pharmacy technician is described. The role of the pharmacy technician was based on a needs assessment and the expertise of the pharmacy technician selected. Initial responsibilities of the technician included chart reviews, benchmarking surveys, monthly financial impact analysis, initiative assessment, and quality improvement reporting. As the drug-use and disease-state management (DUDSM) program expanded, pharmacist activities increased, requiring the expansion of data analyst technician (DAT) duties. These new responsibilities included participation in patient assessment, data collection and interpretation, and formulary enforcement. Most recently, technicians' expanded duties include maintenance of a physician compliance profiling database, quality improvement reporting and graphing, active role in patient risk assessment and database management for adult vaccination, and support of financial impact monitoring for other institutions within the health system. This pharmacist-technician collaboration resulted a threefold increase in patient assessments completed per day. In addition, as the DUDSM program continues to expand across the health system, an increase in DAT resources from 0.5 to 1.0 full-time equivalent was obtained. The role of the DAT has increased the efficiency of the DUDSM program and has provided an innovative role for the pharmacy technician.
Training and qualification of health and safety technicians at a national laboratory
DOE Office of Scientific and Technical Information (OSTI.GOV)
Egbert, W.F.; Trinoskey, P.A.
1994-10-01
Over the last 30 years, Lawrence Livermore National Laboratory (LLNL) has successfully implemented the concept of a multi-disciplined technician. LLNL Health and Safety Technicians have responsibilities in industrial hygiene, industrial safety, health physics, as well as fire, explosive, and criticality safety. One of the major benefits to this approach is the cost-effective use of workers who display an ownership of health and safety issues which is sometimes lacking when responsibilities are divided. Although LLNL has always promoted the concept of a multi-discipline technician, this concept is gaining interest within the Department of Energy (DOE) community. In November 1992, individuals frommore » Oak Ridge Institute of Science and Education (ORISE) and RUST Geotech, joined by LLNL established a committee to address the issues of Health and Safety Technicians. In 1993, the DOE Office of Environmental, Safety and Health, in response to the Defense Nuclear Facility Safety Board Recommendation 91-6, stated DOE projects, particularly environmental restoration, typically present hazards other than radiation such as chemicals, explosives, complex construction activities, etc., which require additional expertise by Radiological Control Technicians. They followed with a commitment that a training guide would be issued. The trend in the last two decades has been toward greater specialization in the areas of health and safety. In contrast, the LLNL has moved toward a generalist approach integrating the once separate functions of the industrial hygiene and health physics technician into one function.« less
Uneasiness among laboratory technicians.
Arluke, A
1999-01-01
Four aspects of animal experimentation cause uneasiness among many animal laboratory technicians. First, if technicians form strong attachments to lab animals, they feel conflict between their nurturing and the experimental manipulations they perform. Most technicians learn to curtail these attachments. Second, the "sacrifice" of lab animals becomes routinized and stripped of special meaning for many technicians, making killing uncomfortably rote. Third, technicians sometimes encounter outsiders who are critical of animal experimentation and ridicule the technicians for doing this work. Most technicians avoid telling outsiders about their work or take an educational approach to deal with these awkward encounters. Finally, most technicians report some ethical uneasiness about certain types of experiments and their clinical value, as well as about the use of certain animals, and they feel they cannot turn to investigators or fellow technicians to pursue such issues.
RCT: Module 2.11, Radiological Work Coverage, Course 8777
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hillmer, Kurt T.
2017-07-20
Radiological work is usually approved and controlled by radiation protection personnel by using administrative and procedural controls, such as radiological work permits (RWPs). In addition, some jobs will require working in, or will have the potential for creating, very high radiation, contamination, or airborne radioactivity areas. Radiological control technicians (RCTs) providing job coverage have an integral role in controlling radiological hazards. This course will prepare the student with the skills necessary for RCT qualification by passing quizzes, tests, and the RCT Comprehensive Phase 1, Unit 2 Examination (TEST 27566) and will provide in-the-field skills.
[Telecommunications, health and radiology: potential synergies for the new millennium].
Lagalla, R
2001-01-01
Healthcare telematics, or telemedicine, is a new methodology that applies the potentialities of telecommunications technologies to the needs of medicine, thereby greatly contributing to improving the management of clinical data and medical information for the benefit of the individual patient and the community at large. The fields of application of Telemedicine are becoming increasingly vast, and this gives rise to technical problems (interconnections) as well as professional, ethical, medico-legal and legal problems. The dissemination of Telemedicine will require changes to be made to the organisation and delivery of the medical/administrative services connected to the management of patient data, the remote provision of care, and the impact of Telemedicine itself (e.g. need to standardise the nomenclature for telemedicine services). In addition, it will also call for a careful analysis of costs and benefits for both healthcare providers and patients. One of the most interesting experiences in terms of impact is Teleradiology. This is neither a new discipline nor a (sub)specialty: the practice of Teleradiology must comply with the rules regulating any radiological medical act, the primary aim of which is to contribute to establishing - rapidly and accurately - a diagnosis that will affect treatment strategies. It may be anticipated that in some situations Teleradiology will significantly change the working practices of Radiology Specialists and Radiology Technicians. Because it is better to anticipate problems rather than wait for them to arise, our Scientific Society, which is always sensitive to emerging issues, intends to propose the following recommendations/guidelines for the use of Teleradiology in the common interest of the community and healthcare workers. The invitation to take part in the initiative proposed by the Italian Society of Medical Radiology (SIRM), the Italian Association of Nuclear Medicine (AIMN) and the Italian Association of Neuroradiology
Alici, Nur Şafak; Beyan, Ayşe Coşkun; Demıral, Yücel; Çimrin, Arif
2018-01-01
Background: Dental laboratories include many hazards and risks. Dental technicians working in an unfavorable work environment in Turkey and other parts of the world may develop pneumoconiosis as a result of exposure to dust, depending on exposure time. In this study, we aimed to investigate the clinical and laboratory findings of dental technicians. Materials and Methods: The study consists of a case series. Between 2013 and 2016, a total of 70 who were working as a dental technician and referred to our clinic with suspicion of occupational disease were evaluated. Comprehensive work-history, physical examination complaints, functional status, chest X-ray, and high-resolution computed lung tomography (HRCT) findings were evaluated. Results: In all, 46 (65.7%) of the 70 dental technicians were diagnosed with pneumoconiosis. About 45 (97.8%) subjects were male and 1 (2.2%) was female. The mean age of starting to work was 15.89 ± 2.79 (11-23) years. The mix dust exposure time was 176.13 ± 73.97 (18-384) months. Small round opacities were most common finding. In 16 patients, high profusion being 2/3 and above were identified, and large opacity was detected in 11 patients. The radiological profusion had a weak negative correlation with FEV 1 and FVC (correlation coefficient − 0.18, P = 0.210 and − 0.058, P = 0704) and moderate negative correlation between radiological profusion and FEV1/FVC (correlation coefficient − 0.377, P = 0.010). In addition, no correlation was observed between the age at start of work and the duration of exposure. Conclusion: The presence of pneumoconiosis continues in dental technicians in Turkey, especially because there is an early childhood apprenticeship culture and almost all workers in this period have the history of sandblasting. PMID:29743783
Extracting numeric measurements and temporal coordinates from Japanese radiological reports
NASA Astrophysics Data System (ADS)
Imai, Takeshi; Onogi, Yuzo
2004-04-01
Medical records are written mainly, in natural language. The focus of this study is narrative radiological reports written in natural Japanese. These reports cannot be used for advanced retrieval, data mining, and so on, unless they are stored, using a structured format such as DICOM-SR. The goal is to structure narrative reports progressively, using natural language processing (NLP). Structure has many different levels, for example, DICOM-SR has three established levels -- basic text, enhanced and comprehensive. At the enhanced level, it is necessary to use numerical measurements and spatial & temporal coordinates. In this study, the wording used in the reports was first standardized, dictionaries were organized, and morphological analysis performed. Next, numerical measurements and temporal coordinates were extracted, and the objects to which they referred, analyzed. 10,000 CT and MR reports were separated into 82,122 sentences, and 34,269 of the 36,444 numerical descriptions were tagged. Periods, slashes, hyphens, and parentheses are ambiguously used in the description of enumerated lists, dates, image numbers, and anatomical names, as well as at the end of sentences; to resolve this ambiguity, descriptions were processed, according to the order -- date, size, unit, enumerated list, and abbreviation -- then, the tagged reports were separated into sentences.
A case of hypersensitivity pneumonitis with giant cells in a female dental technician.
Kim, Yong-Hyun; Chung, Yun Kyung; Kim, Changhwan; Nam, Eun Suk; Kim, Hyun-Jun; Joo, Youngsu
2013-10-04
Dental technicians are exposed to methyl methacrylate(MMA) and hard metal dusts while working, and several cases of hypersensitivity pneumonitis caused by the exposure have been reported. The authors experienced a case of hypersensitivity pneumonitis in a female dental technician who had 10 years' work experience and report the case with clinical evidence. The patient's work, personal, social, and past and present medical histories were investigated based on patient questioning and medical records. Furthermore, the workplace conditions and tools and materials the patient worked with were also evaluated. Next, the pathophysiology and risk factors of pneumonitis were studied, and studies on the relationship between hypersensitivity pneumonitis and a dental technician's exposure to dust were reviewed. Any changes in the clinical course of her disease were noted for evaluation of the work-relatedness of the disease. The patient complained of cough and sputum for 1 year. In addition, while walking up the stairs, the patient was not able to ascend without resting due to dyspnea. She visited our emergency department due to epistaxis, and secondary hypertension was incidentally suspected. Laboratory tests including serologic, electrolyte, and endocrinologic tests and a simple chest radiograph showed no specific findings, but chest computed tomography revealed a centrilobular ground-glass pattern in both lung fields. A transbronchial biopsy was performed, and bronchoalveolar washing fluid was obtained. Among the findings of the laboratory tests, microcalcification, noncaseating granuloma containing foreign body-type giant cells, and metal particles within macrophages were identified histologically. Based on these results, hypersensitivity pneumonitis was diagnosed. The patient stopped working due to admission, and she completely quit her job within 2 months of restarting work due to reappearance of the symptoms. In this study, the patient did not have typical radiologic
Pneumoconiosis in dental technicians: HRCT and pulmonary function findings.
Kahraman, H; Koksal, N; Cinkara, M; Ozkan, F; Sucakli, M H; Ekerbicer, H
2014-09-01
Pneumoconiosis is a form of diffuse interstitial lung disease, often resulting from occupational exposures. As dental prosthetic technicians (DPTs) build prostheses, they are exposed to many chemical materials that increase their risk of developing pneumoconiosis. To document pulmonary function and prevalence of pneumoconiosis in DPTs. A cross-sectional study of DPTs working in prosthetic laboratories who underwent pulmonary function test and high-resolution chest computed tomography (HRCT) scanning. There were 76 participants and pneumoconiosis was diagnosed in 46%. The most commonly seen radiological finding was round opacities, present in 38%. Agreement among HRCT readers was moderate to good. As defined by HRCT, emphysema was diagnosed more often in those with a longer occupational history or a history of smoking, and low carbon monoxide diffusion capacity (DLCO), but not in those with pneumoconiosis. Forced expiratory rate and DLCO were significantly lower in those who had worked 16 years or more (all P < 0.05). DLCO values were significantly lower in technicians with emphysema and in current smokers (all P < 0.01). Round opacities were also present in a substantial proportion of DPTs who had 15 years or less exposure. Because HRCT is able to detect radiological changes of occupational lung disease very early, the prevalence of pneumoconiosis in our participants was quite high. Pneumoconiosis identified by HRCT was present in almost half of DPTs surveyed. Appropriate education and workplace protection should be given to DPTs in order to prevent exposure to hazardous materials in dental prosthetics laboratories. © The Author 2014. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.
ERIC Educational Resources Information Center
American Society for Engineering Education, Washington, DC.
Occupational and educational information concerning 12 categories of engineering technicians and engineering technology is presented. This information covers the role of the technicians, student qualifications, typical job titles, and typical educational programs. The categories presented are (1) air conditioning, heating, and refrigeration, (2)…
2003-11-05
KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, technicians begin pre-assembly measurements on the Japanese Experiment Module (JEM). Developed by the Japan Aerospace Exploration Agency (JAXA), the JEM will enhance the unique research capabilities of the orbiting complex by providing an additional environment for astronauts to conduct science experiments.
Training pharmacy technicians to administer immunizations.
McKeirnan, Kimberly C; Frazier, Kyle R; Nguyen, Maryann; MacLean, Linda Garrelts
To evaluate the effectiveness of an immunization training program for pharmacy technicians on technicians' self-reported confidence, knowledge, and number of vaccines administered. A one-group pre- and posttest study was conducted with certified pharmacy technicians from Albertsons and Safeway community pharmacies in Idaho. Thirty pharmacy technicians were recruited to participate in an immunization administration training program comprising a 2-hour home study and a 2-hour live training. Pharmacy technician scores on a 10-question knowledge assessment, responses on a pre- and posttraining survey, and number of immunizations administered in the 6-month period following the training were collected. Twenty-five pharmacy technicians completed the home study and live portions of the immunization training program. All 29 pharmacy technicians who took the home study assessment passed with greater than 70% competency on the first attempt. Technicians self-reported increased confidence with immunization skills between the pretraining survey and the posttraining survey. From December 2016 to May 2017, the technicians administered 953 immunizations with 0 adverse events reported. For the first time, pharmacy technicians have legally administered immunizations in the United States. Trained pharmacy technicians demonstrated knowledge of vaccination procedures and self-reported improved confidence in immunization skills and administered immunizations after participating in a 4-hour training program. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.
ERIC Educational Resources Information Center
Tech Directions, 2010
2010-01-01
Diesel engine technicians maintain and repair the engines that power transportation equipment such as heavy trucks, trains, buses, and locomotives. Some technicians work mainly on farm machines, ships, compressors, and pumps. Others work mostly on construction equipment such as cranes, power shovels, bulldozers, and paving machines. This article…
ERIC Educational Resources Information Center
Ohio State Univ., Columbus. Center on Education and Training for Employment.
This document, which is designed for use in developing a tech prep competency profile for the occupation of emergency medical technician, lists technical competencies and competency builders for 18 units pertinent to the health technologies cluster in general and 4 units specific to the occupation of emergency medical technician. The following…
ERIC Educational Resources Information Center
Moore, Pam
2008-01-01
Fluid power technicians, sometimes called hydraulic and pneumatic technicians, work with equipment that utilizes the pressure of a liquid or gas in a closed container to transmit, multiply, or control power. Working under the supervision of an engineer or engineering staff, they assemble, install, maintain, and test fluid power equipment.…
Medical Laboratory Technician.
ERIC Educational Resources Information Center
Ohio State Univ., Columbus. Center on Education and Training for Employment.
This document, which is designed for use in developing a tech prep competency profile for the occupation of medical laboratory technician, lists technical competencies and competency builders for 18 units pertinent to the health technologies cluster in general and 8 units specific to the occupation of medical laboratory technician. The following…
ERIC Educational Resources Information Center
Ohio State Univ., Columbus. Center on Education and Training for Employment.
This document, which is designed for use in developing a tech prep competency profile for the occupation of dental laboratory technician, lists technical competencies and competency builders for 13 units pertinent to the health technologies cluster in general and 8 units to the occupation of dental laboratory technician. The following skill areas…
ERIC Educational Resources Information Center
Moore, Pam
2011-01-01
With President Obama's goal to have one million electric vehicles (EV) on the road by 2015, the electric vehicle technician should have a promising and busy future. "The job force in the car industry is ramping up for a revitalized green car industry," according to Greencareersguide.com. An electric vehicle technician will safely troubleshoot and…
ERIC Educational Resources Information Center
Employment and Training Administration (DOL), Washington, DC. Bureau of Apprenticeship and Training.
These national standards are intended to serve as a guide for the establishment of thorough and complete apprenticeship programs to produce trained optical technicians (contact lens technicians). Covered in the individual sections are the following topics: definitions, qualifications for apprenticeship, credit for previous experience, continuity…
2003-11-05
KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, a technician takes readings for pre-assembly measurements on the Japanese Experiment Module (JEM). Developed by the Japan Aerospace Exploration Agency (JAXA), the JEM will enhance the unique research capabilities of the orbiting complex by providing an additional environment for astronauts to conduct science experiments.
2003-11-05
KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, technicians take readings for pre-assembly measurements on the Japanese Experiment Module (JEM). Developed by the Japan Aerospace Exploration Agency (JAXA), the JEM will enhance the unique research capabilities of the orbiting complex by providing an additional environment for astronauts to conduct science experiments.
2003-09-24
KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, Japanese astronaut Koichi Wakata (top left) and technicians watch as a tray is extended from inside the Pressurized Module, or PM, part of the Japanese Experiment Module (JEM). The PM provides a shirt-sleeve environment in which astronauts on the International Space Station can conduct microgravity experiments. There are a total of 23 racks, including 10 experiment racks, inside the PM providing a power supply, communications, air conditioning, hardware cooling, water control and experiment support functions.
Career Directions: HVACR Technician
ERIC Educational Resources Information Center
Moore, Pam
2005-01-01
Heating/ventilation/air conditioning/refrigeration (HVACR) technicians (also known as "heating and cooling technicians") are the people who install, maintain, test and repair the machines that control temperature, circulation, moisture and purity of air in residential, commercial and industrial buildings. These systems consist of a variety of…
Technician Education Yearbook 1984.
ERIC Educational Resources Information Center
Prakken Publications, Inc., Ann Arbor, MI.
This yearbook deals with technician education. Included in a section on new issues, problems, and proposals for technician education are the following papers: "High Technology Challenges the Vocational-Technical Curriculum," by Walter J. Brooking; "Assessment of Technical Competency," by Gordon C. McMahon; "Industry and Education Cooperation…
Delli Carri, Felice; Ruggiero, Maria Assunta; Cuculo, Andrea; Ruggiero, Antonio; Ziccardi, Luigi; De Gennaro, Luisa; Di Biase, Matteo
2014-01-01
Background Exact quantification of plaque extension during coronary angioplasty (PCI) usually falls on interventional cardiologist (IC). Quantitative coronary stenosis assessment (QCA) may be possibly committed to the radiology technician (RT), who usually supports cath-lab nurse and IC during PCI. We therefore sought to investigate the reliability of QCA performed by RT in comparison with IC. Methods Forty-four consecutive patients with acute coronary syndrome underwent PCI; target coronary vessel size beneath target coronary lesion (S) and target coronary lesion length (L) were assessed by the RT, junior IC (JIC), and senior IC (SIC) and then compared. SIC evaluation, which determined the final stent selection for coronary stenting, was considered as a reference benchmark. Results RT performance with QCA support in assessing target vessel size and target lesion length was not significantly different from SIC (r = 0.46, p < 0.01; r = 0.64, p < 0.001, respectively) as well as JIC (r = 0.79, r = 0.75, p < 0.001, respectively). JIC performance was significantly better than RT in assessing target vessel size (p < 0.05), while not significant when assessing target lesion length. Conclusions RT may reliably assess target lesion by using adequate QCA software in the cath-lab in case of PCI; RT performance does not differ from SIC. PMID:24672672
Brunetti, Natale Daniele; Delli Carri, Felice; Ruggiero, Maria Assunta; Cuculo, Andrea; Ruggiero, Antonio; Ziccardi, Luigi; De Gennaro, Luisa; Di Biase, Matteo
2014-03-01
Exact quantification of plaque extension during coronary angioplasty (PCI) usually falls on interventional cardiologist (IC). Quantitative coronary stenosis assessment (QCA) may be possibly committed to the radiology technician (RT), who usually supports cath-lab nurse and IC during PCI. We therefore sought to investigate the reliability of QCA performed by RT in comparison with IC. Forty-four consecutive patients with acute coronary syndrome underwent PCI; target coronary vessel size beneath target coronary lesion (S) and target coronary lesion length (L) were assessed by the RT, junior IC (JIC), and senior IC (SIC) and then compared. SIC evaluation, which determined the final stent selection for coronary stenting, was considered as a reference benchmark. RT performance with QCA support in assessing target vessel size and target lesion length was not significantly different from SIC (r = 0.46, p < 0.01; r = 0.64, p < 0.001, respectively) as well as JIC (r = 0.79, r = 0.75, p < 0.001, respectively). JIC performance was significantly better than RT in assessing target vessel size (p < 0.05), while not significant when assessing target lesion length. RT may reliably assess target lesion by using adequate QCA software in the cath-lab in case of PCI; RT performance does not differ from SIC.
Japanese encephalitis in a French traveler to Nepal.
Lagarde, S; Lagier, J-C; Charrel, R; Quérat, G; Vanhomwegen, J; Desprès, P; Pelletier, J; Kaphan, E
2014-02-01
Japanese encephalitis is frequent in Asia, with a severe prognosis, but rare in travelers. Culex mosquitoes transmit Japanese encephalitis virus. Risk factors are destination, duration of stay, summer and fall seasons, outdoor activities, and type of accommodation. We report the case of a French traveler to Nepal with neutralization-based serological confirmed Japanese encephalitis. He presented classical clinical (viral syndrome before an encephalitis status with behavioral disorder, global hypotonia, mutism, movement disorders, seizure, and coma), radiological (lesions of thalami, cortico-spinal tracts, and brainstem) and biological features (lymphocytic meningitis). Nowadays, the presence of Japanese encephalitis virus in Nepal, including mountain areas, is established but Japanese encephalitis remains rare in travelers returning from this area and neurologist physicians need to become familiar with this. We recommend vaccination for travelers spending a long period of time in Nepal and having at-risk outdoor activities.
You're a What?: Tower Technician
ERIC Educational Resources Information Center
Vilorio, Dennis
2012-01-01
In this article, the author talks about the role and functions of a tower technician. A tower technician climbs up the face of telecommunications towers to remove, install, test, maintain, and repair a variety of equipment--from antennas to light bulbs. Tower technicians also build shelters and radiofrequency shields for electronic equipment, lay…
Napier, Patti; Norris, Pauline; Green, James; Braund, Rhiannon
2016-04-01
This study aimed to investigate the opinions of pharmacists and technicians regarding the ability of New Zealand technicians to take on an advanced checking technician role. A survey was developed to investigate the opinions regarding the introduction of this new role. The questions covered are: perceived ability to take on the role, training requirements and competence. Surveys were sent to pharmacists whose contact details are available for research purposes (n = 2095) and to all pharmacies in New Zealand (both community and hospital) for the attention of technicians (n = 858). The results were analysed using IBM SPSS and thematic analysis of comments was conducted. A total of 1221 surveys were returned (pharmacists = 736 and technicians = 485). The majority of the technicians (83%) believed that 'some' technicians could work in a CT role, compared with 73% of the pharmacists. Over two-thirds (69%) of the technicians felt comfortable checking a prescription at their current level of training compared with 53% of pharmacists. Both groups' comfort increased with further specific training for the technicians. The majority of both of these groups supported the change in roles. Pharmacists were less confident that technicians could take on this role now, but were more comfortable after extra training had been completed. The technicians, however, were confident they could take on this role now but would take on extra training if needed. © 2015 Royal Pharmaceutical Society.
2003-09-24
KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, Japanese astronaut Koichi Wakata, dressed in blue protective clothing (at right), looks at the inside of the Pressurized Module, or PM, part of the Japanese Experiment Module (JEM), along with technicians. The PM provides a shirt-sleeve environment in which astronauts on the International Space Station can conduct microgravity experiments. There are a total of 23 racks, including 10 experiment racks, inside the PM providing a power supply, communications, air conditioning, hardware cooling, water control and experiment support functions.
Pharmacy technician involvement in community pharmacy medication therapy management.
Lengel, Matthew; Kuhn, Catherine H; Worley, Marcia; Wehr, Allison M; McAuley, James W
To assess the impact of technician involvement on the completion of medication therapy management (MTM) services in a community pharmacy setting and to describe pharmacists' and technicians' perceptions of technician involvement in MTM-related tasks and their satisfaction with the technician's role in MTM. Prospective observational study. In the fall of 2015, pharmacists and selected technicians from 32 grocery store-based community pharmacies were trained to use technicians within MTM services. Completed MTM claims were evaluated at all pharmacies for 3 months before training and 3 months after training. An electronic survey, developed with the use of competencies taught in the training and relevant published literature, was distributed via e-mail to trained employees 3 months after training. The total number of completed MTM claims at the 32 pharmacy sites was higher during the posttraining time period (2687 claims) versus the pretraining period (1735 claims). Of the 182 trained participants, 112 (61.5%) completed the survey. Overall, perceived technician involvement was lower than expected. However, identifying MTM opportunities was the most commonly reported technician MTM task, with 62.5% of technicians and 47.2% of pharmacists reporting technician involvement. Nearly one-half of technicians (42.5%) and pharmacists (44.0%) agreed or strongly agreed they were satisfied with the technician's role in MTM services, and 40.0% of technicians agreed that they were more satisfied with their work in the pharmacy after involvement in MTM. Three months after initial training of technicians in MTM, participation of technicians was lower than expected. However, the technicians involved most often reported identifying MTM opportunities for pharmacists, which may be a focus for future technician trainings. In addition, technician involvement in MTM services may increase satisfaction with many aspects of work for actively involved technicians. Copyright © 2018 American
ERIC Educational Resources Information Center
Baird, Collette
1996-01-01
Describes the development of occupational standards for technicians in education and highlights the main aspects of the work. Explains the importance of learning as much as possible about technicians' work so that emerging occupational standards are both accurate and enabling. (DDR)
Environmental Technician Training in the United Kingdom.
ERIC Educational Resources Information Center
Potter, John F.
1985-01-01
Stresses the need for qualified environmental science technicians and for training courses in this area. Provides program information and statistical summarization of a national diploma program for environmental technicians titled "Business and Technician Education Council." Reviews the program areas of environmental analysis and…
Radiology Technician, 10-5. Military Curriculum Materials for Vocational and Technical Education.
ERIC Educational Resources Information Center
Ohio State Univ., Columbus. National Center for Research in Vocational Education.
These five volumes of student materials for a secondary/postsecondary level course in radiology technology comprise one of a number of military-developed curriculum packages selected for adaptation to vocational instruction and curriculum development in a civilian setting. The purpose stated for the course is to provide the theory portion of…
ATIP: Automotive Technician Internship Program.
ERIC Educational Resources Information Center
De Anza Coll., Cupertino, CA.
The Automotive Technology Department (ATD) of De Anza College (DAC) in Cupertino, California, in partnership with the Automotive Service Council of California, received funding to develop and implement a 2-year, competency-based certification program for automotive service technicians. Students in the Automotive Technician Internship Program…
Criteria for Technician Education. A Suggested Guide.
ERIC Educational Resources Information Center
Office of Education (DHEW), Washington, DC.
This publication discusses criteria for post-secondary education of technicians as illustrated by the accumulated experience of successful programs which have had their graduates sought after by employees. Chapter headings are (1) Technicians: Who They Are and What They Do, (2) Administration of Programs to Educate Technicians, (3) Physical…
5 CFR 842.210 - Military reserve technicians.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Military reserve technicians. 842.210... REGULATIONS (CONTINUED) FEDERAL EMPLOYEES RETIREMENT SYSTEM-BASIC ANNUITY Eligibility § 842.210 Military reserve technicians. (a) A military reserve technician as defined in 5 U.S.C. 8401(30) who is separated...
Current status, crisis and trends in Chinese dental technicians.
Chaoyi, Ma; Liwei, Zheng; Li, Yue; Min, Zhou; Haiyang, Yu
2012-04-01
Chinese dental technicians play a significant role in the globalised market of dental prosthesis fabrication, but this subject has not been investigated in detail. The demand for dental prostheses increases as individuals pay increasing attention to their oral health. Therefore, it is important to investigate the status of Chinese dental technicians. To evaluate the current status of Chinese dental technicians. Dental technicians' resumés, which reveal information regarding dental technician manpower, degrees, working age and salary, etc., were analysed and compared with those abroad. We also estimated the future demands of dental technician manpower, and discussed some potential solutions. There are fewer dental technicians in China than in other developed countries; they are also of a lower standard. Male technicians outnumber females. The education level of technicians is insufficient, and the education programme is still in its exploratory stage. The development of dental technician teams in China represents both an opportunity and a challenge. It is important to move forward from the current situation to yield long-term development. This article provides information on the Chinese dental technology industry, identifies the problems and offers solutions for its development. © 2012 FDI World Dental Federation.
The Education and Training of Marine Technicians.
ERIC Educational Resources Information Center
Chan, Gordon L.
This report includes a study of the need for marine technicians in California, implications for the national scene, and observations made at a national conference held in Florida in 1968. Problems treated are: (1) definition of a marine technician, (2) how marine technicians should be classified, (3) how great is the demand for them, (4) the type…
24 CFR 291.530 - Eligible firefighter/emergency medical technicians.
Code of Federal Regulations, 2010 CFR
2010-04-01
... medical technicians. 291.530 Section 291.530 Housing and Urban Development Regulations Relating to Housing... medical technicians. A person qualifies as a firefighter/emergency medical technician for the purposes of... technician by a fire department or emergency medical services responder unit of the federal government, a...
Prescott, E; Steendahl, U; Damsgaard, M T
1989-10-01
The preparation methylmethacrylate (MMA) an organic solvent which is employed inter alii in the production of prostheses, is regarded as neurotoxic. With the object of illustrating to what extent dental technicians have symptoms compatible with organic dementia as compared with a control group, a cross-sectional questionnaire investigation was undertaken in a population consisting of 256 dental technicians and 160 opticians, all of whom were professionally active. The percentage replies for the two group were 88 and 85 respectively. The two groups do not differ from one another as regards background variables with the exception of age and adjustments are made for this in the analysis. The results demonstrate that there is a statistically higher prevalence of the majority of acute and also chronic symptoms among dental technicians than among opticians. The symptom pattern and the presence of information and selection bias are discussed and it is concluded that this investigation confirms the hypothesis that symptoms compatible with organic dementia are commoner among dental technicians. The results raise the suspicion that MMA may cause acute and chronic damage to the central nervous system, even after very slight exposure. Revision of the occupational environment of dental technicians, including the current hygienic limits for MMA, is recommended.
Dauer, Lawrence T; Zanzonico, Pat; Tuttle, R Michael; Quinn, Dennis M; Strauss, H William
2011-09-01
The Fukushima Daiichi nuclear power facility, in the Futaba District of the Fukushima Prefecture in Japan, was severely damaged by the earthquake and ensuing tsunami that struck off the northern coast of the island of Honshu on March 11, 2011. The resulting structural damage to the plant disabled the reactor's cooling systems and led to significant, ongoing environmental releases of radioactivity, triggering a mandatory evacuation of a large area surrounding the plant. The status of the facility continues to change, and permanent control of its radioactive inventory has not yet been achieved. The purpose of this educational article is to summarize the short-term chronology, radiologic consequences, emergency responses, and long-term challenges associated with this event. Although there is ongoing debate on preparedness before the event and the candor of responsible entities in recognizing and disclosing its severity, it largely appears that appropriate key actions were taken by the Japanese authorities during the event that should mitigate any radiologic health impact. These actions include an organized evacuation of over 200,000 inhabitants from the vicinity of the site and areas early in the emergency; monitoring of food and water and placement of radiation limits on such foodstuffs; distribution of stable potassium iodide; and systematic scanning of evacuees. However, the risk of additional fuel damage and of further, perhaps substantial, releases persists. The situation at the Fukushima Daiichi nuclear facility remains fluid, and the long-term environmental and health impact will likely take years to fully delineate.
Enactment of mandatory pharmacy technician certification in Kansas.
Lucas, Amber; Massey, Lindsay; Gill, Taylor; Burger, Gregory; Little, Jeff D
2016-02-01
The successful enactment of mandatory pharmacy technician certification in Kansas is described. In 2004, Kansas began requiring registration of all pharmacy technicians with the state board of pharmacy. Registration identified individuals working as pharmacy technicians but did not require any specific education or certification. In September 2012, the Kansas Board of Pharmacy created a task force of key stakeholders including pharmacists from multiple areas of practice, the University of Kansas School of Pharmacy, organizational leaders from the Kansas Council of Health-System Pharmacists (KCHP) and Kansas Pharmacists Association, and professional lobbyists. The goals of this task force were to research practices of technician certification in other states and to make recommendations to the state board of pharmacy on how Kansas could accomplish mandatory technician certification. The task force outlined the steps needed to achieve legislation that could be supported by the members. These topics included the creation of a technician trainee category, grandfathering certain technicians who had been practicing for a designated period of time, state board-approved exemptions, training requirements, age and education requirements, continuing-education requirements, and pharmacist:technician ratio. The recommendations were finalized at the August 2013 Kansas Pharmacy Summit, and the proposed legislation was introduced and passed during the 2014 legislative session. KCHP members learned many valuable lessons about advocacy and the legislative process with this initiative, including building relationships, working with legislators, and working with other professional organizations. The formation of a task force led to the successful passage of a bill granting the Kansas Board of Pharmacy the authority to issue regulations regarding mandatory pharmacy technician certification. Copyright © 2016 by the American Society of Health-System Pharmacists, Inc. All rights reserved.
Data Processing Technician 3 and 2: Revised 1973.
ERIC Educational Resources Information Center
Naval Training Publications Detachment, Washington, DC.
The training manual is designed to train naval personnel in the professional aspects of their rating as Data Processing (DP) Technician and is a direct help to meeting the occupational qualifications for advancement to Data Processing Technician Third Class and Data Processing Technician Second Class. Personnel of the Data Processing Technician…
ERIC Educational Resources Information Center
Smith, Ken
2009-01-01
About 95% of all manufactured goods in this country are welded or joined in some way. These welded products range in nature from bicycle handlebars and skyscrapers to bridges and race cars. The author discusses what students need to know about careers for welding technicians--wages, responsibilities, skills needed, career advancement…
NHEXAS PHASE I MARYLAND STUDY--TECHNICIAN WALKTHROUGH QUESTIONNAIRE DATA
The Technician Walkthrough questionnaire data set contains information about each household as determined during a walkthrough by trained technicians. The information is from 403 technician walkthrough questionnaires for 80 households across 6 cycles. The questionnaire includes...
[Role of the technician in a brachytherapy department].
Bélot-Cheval, V; Lemoine, L; Cuisinier, C; Gensse, M-C; Lasbareilles, O
2013-04-01
The role of the technician in a brachytherapy department is essential for the cohesion of the treatment team made up of the radiation oncologist, the physicist, and the technician. He/she collaborates in the different treatment steps such as taking care of the patients, training of the professionals and research studies in collaboration with the team. He participates in all steps of the treatment such as preparation, technician's consultation, catheters/templates and radioactives sources implant, dose distribution analysis and treatment. He looks after the management of planning, radioactive sources and chemist's equipments. He takes part in the training of the junior technician, and support doctors and physicists in different studies. The procedure writing and the presentation of professional practices are also part of the technician task. Copyright © 2013 Société française de radiothérapie oncologique (SFRO). Published by Elsevier SAS. All rights reserved.
ERIC Educational Resources Information Center
Ohio State Univ., Columbus. Center on Education and Training for Employment.
This document contains 25 units to consider for use in a tech prep competency profile for the occupation of electromechanical technician. All the units listed will not necessarily apply to every situation or tech prep consortium, nor will all the competencies within each unit be appropriate. Several units appear within each specific occupation and…
ERIC Educational Resources Information Center
Ohio State Univ., Columbus. Center on Education and Training for Employment.
This document contains 22 units to consider for use in a tech prep competency profile for the occupation of CADD (computer-assisted drafting and design) technician. All the units listed will not necessarily apply to every situation or tech prep consortium, nor will all the competencies within each unit be appropriate. Several units appear within…
ERIC Educational Resources Information Center
Ohio State Univ., Columbus. Center on Education and Training for Employment.
This document contains 27 units to consider for use in a tech prep competency profile for the occupation of electronics technician. All the units listed will not necessarily apply to every situation or tech prep consortium, nor will all the competencies within each unit be appropriate. Several units appear within each specific occupation and would…
ERIC Educational Resources Information Center
Ohio State Univ., Columbus. Center on Education and Training for Employment.
This document contains 16 units to consider for use in a tech prep competency profile for the occupation of plastics technician. All the units listed will not necessarily apply to every situation or tech prep consortium, nor will all the competencies within each unit be appropriate. Several units appear within each specific occupation and would…
ERIC Educational Resources Information Center
Ohio State Univ., Columbus. Center on Education and Training for Employment.
This document contains 33 units to consider for use in a tech prep competency profile for the occupation of mechanical technician. All the units listed will not necessarily apply to every situation or tech prep consortium, nor will all the competencies within each unit be appropriate. Several units appear within each specific occupation and would…
Prescott, E; Steendahl, U; Damsgaard, M T
1989-07-17
The preparation methyl metacrylate (MMA) an organic solvent which is employed inter alii in the production of prostheses, is regarded as neurotoxic. With the object of illustrating to what extent dental technicians have symptoms compatible with organic dementia as compared with a control group, a cross-sectional questionnaire investigation was undertaken in a population consisting of 256 dental technicians and 160 opticians, all of whom were professionally active. The percentage replies for the two groups were 88 and 85 respectively. The two groups do not differ from one another as regards background variables with the exception of age and adjustments are made for this in the analysis. The results demonstrate that there is a statistically higher prevalence of the majority of acute and also chronic symptoms among dental technicians than among opticians. The symptom pattern and the presence of information and selection bias are discussed and it is concluded that this investigation confirms the hypothesis that symptoms compatible with organic dementia are commoner among dental technicians. The results raise the suspicion that MMA may cause acute and chronic damage to the central nervous system, even after very slight exposure. Revision of the occupational environment of dental technicians, including the current hygienic limits for MMA, is recommended.
Forest Technician. 2+2 Articulated Curriculum in Agricultural Technology.
ERIC Educational Resources Information Center
York, Walter
This 2+2 articulated curriculum for the occupation of forest technician includes the following: program results and benefits; job description--forest technician; curriculum objective; duty and task listings for forest technician; recommended secondary and postsecondary course options flowchart; recommended student prerequisites; basic outlines for…
46 CFR 160.151-39 - Training of servicing technicians.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 6 2010-10-01 2010-10-01 false Training of servicing technicians. 160.151-39 Section...-39 Training of servicing technicians. (a) The training program for certification of servicing technicians must include— (1) Training and practice in packing an inflatable liferaft, repairing buoyancy...
[Dental technician's pneumoconiosis; a case report].
Karaman Eyüboğlu, Canan; Itil, Oya; Gülşen, Aşkin; Kargi, Aydanur; Cimrin, Arif
2008-01-01
Since 1939, it has been known that, silicosis and extrinsic allergic alveolitis can be seen among dental technicians. The interstitial disease caused by the exposure to complex substances used by dental technicians is classified as a special group called dental technician's pneumoconiosis. A 36-year-old man, who has no smoking history, presented with severe dyspnea. He had worked in different dental laboratories for 22 years, but he did not have respiratory symptoms until five years ago. After that date, he had hospitalized and had been examined for respiratory pathologies for many times. He had came to our clinic, because of the progression of his dyspnea. Diffuse pulmonary parenchymal infiltrates which can be related with pneumoconiosis and chronic type 1 respiratory deficiency had been diagnosed as the result of the examinations. While he has no history of smoking or any other risk factors or diseases in his medical history, the case was accepted as dental technician's pneumoconiosis. The factors related with the pathogenesis of dental technician's pneumoconiosis are; the complex compound of the substances (metal dusts, silica, plaster, wax and resins, chemical liquids, methyl methacrylate) used in this sector and their effects on the lung parenchyma. Extrinsic allergic alveolitis related with methyl methacrylate has been reported. The most important factor to acquire an occupational lung disease is a complex occupational exposure. The insufficient workplace airing and the lack of preventive measures added on this exposure, the risks become much more greater.
ERIC Educational Resources Information Center
Seton Hill Coll., Greensburg, PA.
This curriculum for training geriatric technicians is geared toward developing an understanding of, as well as the skills to assist with, the visually or hearing impaired older adult. The curriculum is organized in four modules. Each module is assigned a time frame and a credit unit base. The modules are divided into four major areas: knowledge,…
Teaching Geographic Field Methods to Cultural Resource Management Technicians
ERIC Educational Resources Information Center
Mires, Peter B.
2004-01-01
There are perhaps 10,000 technicians in the United States who work in the field known as cultural resource management (CRM). The typical field technician possesses a bachelor's degree in anthropology, geography, or a closely allied discipline. The author's experience has been that few CRM field technicians receive adequate undergraduate training…
Overview page provides information for shops and technicians that repair or service motor vehicle air-conditioning systems, including information on proper training, approved equipment, and regulatory practices.
Section 608 Technician Certification
Certifications for technicians who maintain, service, repair, or dispose of equipment that could release ozone depleting refrigerants or, after January 1, 2018, substitute refrigerants into the atmosphere.
Japanese Responses to Social Change—Making the Strange Familiar
Lock, Margaret
1983-01-01
Understanding the concept of a “sense of coherence” can be useful in trying to account for successful and healthy adaptations to situations of social change and migration. Certain fundamental dynamics of social life in Japan contribute to a sense of coherence in the lives of Japanese today. Analysts of modern Japan have noted that it has not become a replica of western societies in that primary social groups take precedence over individual needs and autonomy. Moreover, although the Japanese personality may be characterized as multilayered, one dominant aspect is the tendency to suppress negative feelings—towards intimates, family and those in authority. This tendency has implications for the patient-physician relationship, which tends to be ritualized to protect a patient's innermost feelings. Because there has never been a split between mind and body in Japanese thinking there is no concept of mental health that is separate from physical health; rather, patients and physicians readily accept that illness is an expression of stress on the social level. As a corollary, the responsibility for healing is felt to be in the hands of patients and their families, with physicians playing the part of skilled and sympathetic technicians. Ascribing the origins of a cultural identity risks stereotyping, but understanding the reasons for the continuity of certain values in Japanese immigrants will enable physicians to use these values to advantage, and explains the healthy adaptation of these immigrants to the disruption of migration. PMID:6364571
5 CFR 315.610 - Noncompetitive appointment of certain National Guard technicians.
Code of Federal Regulations, 2010 CFR
2010-01-01
... National Guard technicians. 315.610 Section 315.610 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT... technicians. (a) An agency may appoint noncompetitively a National Guard technician who— (1) Was involuntarily... 3 years as a technician; (3) Meets the qualifications requirements of the job: and (4) Is appointed...
Auto Technician: An Instructional Guide for Teachers.
ERIC Educational Resources Information Center
Ohio State Univ., Columbus. Vocational Instructional Materials Lab.
This guide is designed to help teachers in automotive technician programs for grades 11 and 12 teach the critical competencies of the program. The critical competencies covered are the Priority 1 competencies in Ohio Occupational Competency Assessment Profile (OCAP) for Automotive Technician. Teacher materials include program/instructor resources,…
Yurt, Ayşegül; Cavuşoğlu, Berrin; Günay, Türkan
2014-06-01
In this study, we evaluated the knowledge and perception and mitigation of hazards involved in radiological examinations, focusing on healthcare personnel who are not in radiation-related occupations, but who use ionising radiation as a part of their work. A questionnaire was applied to physicians, nurses, technicians and other staff working in different clinics that use radiation in their work, in order to evaluate their knowledge levels about ionizing radiation and their awareness about radiation doses resulting from radiological examinations. The statistical comparisons between the groups were analyzed with the Kruskal Wallis test using the SPSS program. Ninety two participants took part in the study. Their level of knowledge about ionizing radiation and doses in radiological examinations were found to be very weak. The number of correct answers of physicians, nurses, medical technicians and other personnel groups were 15.7±3.7, 13.0±4.0, 10.1±2.9 and 11.8±4.0, respectively. In the statistical comparison between the groups, the level of knowledge of physicians was found to be significantly higher than the level of the other groups (p=0.005). The present study demonstrated that general knowledge in relation to radiation, radiation protection, health risks and doses used for radiological applications are insufficient among health professions using with ionizing radiation in their work.
Preparing technicians for photonics industries and organizations
NASA Astrophysics Data System (ADS)
Souders, John; Hull, Dan
2012-10-01
U.S. photonics organizations need about 800 new photonics technicians each year. Thirty-one community and technical colleges have approximately 700 students enrolled in photonics related programs; about 275 of them complete their coursework and enter the workforce each year. A disparity exists between the demand and supply of qualified photonics technicians in the U.S. OP-TEC, the National Center for Optics and Photonics Education is a consortium of seven colleges, under the leadership of the University of Central Florida, and sponsored by NSF. OP-TEC's mission is to increase the quantity and quality of photonics technicians prepared at two-year colleges. OP-TEC maintains the National Photonics Skill Standards for Technicians, provides curriculum models, teaching materials, faculty training/professional development and planning services to strengthen existing college photonics programs and to attract and support new ones. OP-TEC is converting its text materials to E-Books to support students in technical programs. Through OP-TEC's recruitment efforts 84 additional colleges are interested in initiating new photonics programs. The OP-TEC Photonics College Network (OPCN) consists of 28 colleges that are currently providing photonics education. This fall OPCN will lead an additional national effort to further educate employed photonics technicians through on-line courses, complemented by lab experiences at nearby colleges. OP-TEC is expanding its outreach to photonics employers and colleges by regionalizing its approach to offering its services. OP-TEC is also planning to develop new curricula and instructional materials for AAS programs to prepare Precision Optics Technicians. This paper will detail OP-TEC's work with particular emphases on its materials and services.
Coping with Work-related Traumatic Situations among Crime Scene Technicians.
Pavšič Mrevlje, Tinkara
2016-10-01
Crime scene technicians collect evidence related to crime and are therefore exposed to many traumatic situations. The coping strategies they use are thus very important in the process of facing the psychological consequences of such work. The available literature shows that crime scene technicians are an understudied subgroup of police workers. Our study is therefore the first unfolding insights into technicians' coping strategies, post-traumatic symptomatology and somatic health, based on a sample of 64 male crime scene technicians (85% of all Slovene technicians). Crime scene technicians mainly use avoidance coping strategies. Approach strategies that are more effective in the long-term-i.e. lead to a larger buffering of the effects of traumatic stress-are more frequently used if technicians are familiar with the nature of the task, when they have time to prepare for it, and if they feel that past situations have been positively resolved. Behavioural avoidance strategies were found to be least effective when dealing with traumatic experiences and are also related to more frequent problems of physical health. Results indicate that appropriate trainings for future technicians would facilitate the use of more effective coping strategies and consequently lead to a more effective and satisfied worker. Copyright © 2014 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.
[Emergency Medical Technician profile in Spain].
Martínez-Isasi, Santiago; Rodríguez-Lorenzo, María José; Vázquez-Santamariña, David; Abella-Lorenzo, Javier; Castro Dios, Diana Josefa; Fernández García, Daniel
2017-12-11
The emergency medical technician plays a fundamental role and is the most important figure quantitatively in pre-hospital emergencies. The aim was to asses the socio-demographic, work-related, health characteristics and technical skills of an Emergency Medical Technician in Spain. Cross-sectional descriptive study. An ad hoc questionnaire was managed using Google Docs® that was delivered between April-June 2014 via email and social networks. A total of 705 questionnaires were collected. Statistical analysis was performed with SPSS ® 20.0 Windows version. A significance level p≤0.05 was used for all analyzes. The data analyzed show that the profile of the Emergency Medical Technician in Spain is an 39 year-old man, married or living as a couple and has a child. The average BMI is 27 kg/m2, does regular exercise, does not smoke. His seniority in the company is 10 years and has the Medium Cycle of Emergency Medical Technician. The analysis for gender shows that men have an average of 40, an average BMI of 27, 5 kg/m2 and work in an advanced life support unit; while women have an average of 36,5 years, an average BMI of 24,7 kg/m2, mainly work in Basic Life Support Unit and her seniority in the company is 6,76 years. Emergency Medical Technician profile is a overweight men, who refer to practise regular exercise, his seniority in the company is 10 years and is in possession of CMTES; differences were observed according to gender in BMI, resource where they perform their work, seniority and age.
Uptake and impact of regulated pharmacy technicians in Ontario community pharmacies.
Grootendorst, Paul; Shim, Minsup; Tieu, Jimmy
2018-01-01
Since 2010, most provincial Colleges of Pharmacists have licensed pharmacy technicians. The colleges hoped this would give pharmacists time to provide "expanded scope" activities such as medication reviews. Little is known, however, about the uptake and impact of pharmacy technicians on pharmacists' provision of such services. We address these questions using data for Ontario community pharmacies. Data on pharmacists and pharmacy technicians were obtained from the Ontario College of Pharmacists website in September 2016. Their place of employment was used to calculate the number of full-time equivalent (FTE) pharmacists and technicians employed at each community pharmacy. Pharmacy claims data for the 12-month period ending March 31, 2016, were obtained from the Ontario Public Drug Programs (OPDP). These data included number of MedsChecks performed, type of MedsCheck and number of prescriptions dispensed to OPDP beneficiaries. Pharmacy technicians were employed in 24% of the pharmacies in our sample. Technician employment rates were highest in Central Fill pharmacies and pharmacies serving long-term care facilities. In general, pharmacies employing 1 or fewer technician full-time equivalents (FTEs) had a slightly higher probability of providing MedsChecks and, of those that did provide Meds Checks Annuals, provided more of them. Pharmacies that hired 3 or more technician FTEs were markedly less likely to provide MedsChecks. Pharmacies differ in their employment of technicians and in the apparent impact of technicians on the provision of MedsChecks. However, these represent associations. Additional research is needed to assess the causal effect of technician employment on the provision of MedsChecks.
Work Force Preparation for Technician-Level Occupations.
ERIC Educational Resources Information Center
Harmon, Hobart L.
The Tech Prep Associate Degree (TPAD) program must be clearly focused on technician-level occupations, which are expected to have the greatest occupational growth. Generally, the preparation required to enter the work force at the technician level is completion of an associate degree program that includes 50 percent theory and 50 percent applied…
Physical Science Experiments for Scientific Glassblowing Technicians.
ERIC Educational Resources Information Center
Tillis, Samuel E.; Donaghay, Herbert C.
The twenty experiments in this text have been designed to give the scientific glassblowing technician the opportunity to use scientific glass apparatus in the study of physical science. Primary emphasis of these experiments is on the practical application of the physical science program as a working tool for the scientific glassblowing technician.…
Advancing the role of the pharmacy technician: A systematic review.
Mattingly, Ashlee N; Mattingly, T Joseph
To summarize the findings of a literature search on advancing the role of pharmacy technicians, including the types of training identified and the potential costs and benefits to both the technician and the pharmacy. A literature search of Scopus, Embase, and Medline was conducted on January 11, 2017. Original research, research reports, case studies, or association reports were included for review. Articles were considered to be relevant based on identification of an advanced pharmacy technician role or addressing additional training/education for technician functions. A standard data extraction form was used to collect study authors, article title, year published, journal title, study design, brief description of methods, primary outcome measures, advanced technician roles identified, additional education or training addressed, and additional costs and benefits identified in each article. A total of 33 articles were included for full review and data extraction. Study design varied, with 17 (52%) quantitative, 1 (3%) qualitative, 5 (15%) mixed-method, and 10 (30%) case study designs. Seventeen (52%) of the studies included were published after 2006. The mechanism of training was primarily through supervised on-the-job training, allowing technicians to assume administrative-based positions that facilitated a pharmacist-led clinical service, with either the pharmacist or the pharmacy receiving the greatest benefits. Although the literature supports technicians performing advanced roles in the pharmacy, resulting in either improved patient outcomes or opportunities for pharmacists to engage in additional clinical services, the benefits to the technician were primarily indirect, such as an increase in job satisfaction or a more desirable work schedule. If a technician is to take on additional roles that require completion of a formalized training or educational program, benefits that are more tangible may help to inspire technicians to pursue these roles. Copyright
Energy Management Technician Curriculum Development. Final Report.
ERIC Educational Resources Information Center
Sarvis, Robert E.
This document is the result of an effort to develop a comprehensive curriculum to train community college students as energy management technicians. The main body of the document contains the energy management technician training curriculum and course content for the proposed courses in the two-year sequence; a report of how the curriculum was…
Section 608 Technician Certification
Overview page with information about certification of technicians who maintain, service, repair, or dispose of equipment that could release ozone depleting refrigerants or, after January 1, 2018, substitute refrigerants into the atmosphere.
ERIC Educational Resources Information Center
KOVNER, EDGAR A.
PROBLEMS CONFRONTED BY PLANNERS OF NUCLEAR PROGRAMS AT THE TECHNICIAN LEVEL INCLUDE (1) LACK OF PRECEDENT IN CURRICULUM, COURSE OUTLINES, AND GRADUATE PLACEMENT, (2) DIFFICULTY IN DETERMINING COSTS OF LABORATORY CONSTRUCTION, EQUIPMENT, AND OPERATION, AND (3) REQUIREMENT OF ATOMIC ENERGY COMMISSION LICENSES IN NUCLEAR OCCUPATIONS. A 92-SEMESTER…
Uptake and impact of regulated pharmacy technicians in Ontario community pharmacies
Grootendorst, Paul; Shim, Minsup
2018-01-01
Background: Since 2010, most provincial Colleges of Pharmacists have licensed pharmacy technicians. The colleges hoped this would give pharmacists time to provide “expanded scope” activities such as medication reviews. Little is known, however, about the uptake and impact of pharmacy technicians on pharmacists’ provision of such services. We address these questions using data for Ontario community pharmacies. Methods: Data on pharmacists and pharmacy technicians were obtained from the Ontario College of Pharmacists website in September 2016. Their place of employment was used to calculate the number of full-time equivalent (FTE) pharmacists and technicians employed at each community pharmacy. Pharmacy claims data for the 12-month period ending March 31, 2016, were obtained from the Ontario Public Drug Programs (OPDP). These data included number of MedsChecks performed, type of MedsCheck and number of prescriptions dispensed to OPDP beneficiaries. Results: Pharmacy technicians were employed in 24% of the pharmacies in our sample. Technician employment rates were highest in Central Fill pharmacies and pharmacies serving long-term care facilities. In general, pharmacies employing 1 or fewer technician full-time equivalents (FTEs) had a slightly higher probability of providing MedsChecks and, of those that did provide Meds Checks Annuals, provided more of them. Pharmacies that hired 3 or more technician FTEs were markedly less likely to provide MedsChecks. Conclusions: Pharmacies differ in their employment of technicians and in the apparent impact of technicians on the provision of MedsChecks. However, these represent associations. Additional research is needed to assess the causal effect of technician employment on the provision of MedsChecks. PMID:29796133
Engine-Building Contest Inspires Future Automotive Technicians
ERIC Educational Resources Information Center
Kraft, Thomas; Morphew, Rick; Norris, Gerald
2004-01-01
According to the Bureau of Labor Statistics, the requirement for automotive technicians will increase 17 percent by 2008 from the 10-year period starting in 1998. In numbers, this translates to the need for an additional 132,000 technicians over the 790,000 that existed in 1998. The nation is currently losing 10 percent of its automotive…
Engineering Technician Standards.
ERIC Educational Resources Information Center
National Aeronautics and Space Administration, Hampton, VA. Langley Research Center.
The booklet describes the program offerings, requirements, training, and pay schedules of the Langley Research Center Technician Training Program. Training schedules and the duties expected upon completion of each of the training areas are specified, along with on-the-job and academic requirements. The areas of training are: engineering draftsman,…
Electrical Maintenance Technician.
ERIC Educational Resources Information Center
Ohio State Univ., Columbus. Center on Education and Training for Employment.
This document contains 30 units to consider for use in a tech prep competency profile for the occupation of electrical maintenance technician. All the units listed will not necessarily apply to every situation or tech prep consortium, nor will all the competencies within each unit be appropriate. Several units appear within each specific…
Manufacturing (Industrial) Technician.
ERIC Educational Resources Information Center
Ohio State Univ., Columbus. Center on Education and Training for Employment.
This document contains 35 units to consider for use in a tech prep competency profile for the occupation of manufacturing (industrial) technician. All the units listed will not necessarily apply to every situation or tech prep consortium, nor will all the competencies within each unit be appropriate. Several units appear within each specific…
Instrumentation Control Technician.
ERIC Educational Resources Information Center
Ohio State Univ., Columbus. Center on Education and Training for Employment.
This document contains 22 units to consider for use in a tech prep competency profile for the occupation of instrumentation control technician. All the units listed will not necessarily apply to every situation or tech prep consortium, nor will all the competencies within each unit be appropriate. Several units appear within each specific…
Agricultural Biotechnology Technician. National Voluntary Occupational Skill Standards.
ERIC Educational Resources Information Center
National Future Farmers of America Foundation, Madison, WI.
The skill standards in this document were developed as a result of meetings between representatives of the agricultural industry and educational institutions to determine the skills and educational preparation required of an agricultural biotechnology technician, verified by technicians working in laboratories, greenhouses, animal facilities, and…
Advancing technician practice: Deliberations of a regulatory board.
Adams, Alex J
2018-01-01
In 2016, the Idaho State Board of Pharmacy (U.S.) undertook a major rulemaking initiative to advance pharmacy practice by broadening the ability of pharmacists to delegate tasks to pharmacy technicians. The new rules of the Board thus moved the locus of control in technician scope of practice from law to pharmacist delegation. Pharmacist delegation is individualistic and takes into account the individual technician's capabilities, the pharmacist's comfort level, facility policies, and the risk mitigation strategies present at the facility, among other factors. State law limits, by contrast, are rigid and can mean that pharmacists are unable to delegate tasks that are or could otherwise be within the abilities of their technicians. The expanded technician duties are in two domains: 1) medication dispensing support (e.g., tech-check-tech, accepting verbal prescriptions, transferring prescriptions, and performing remote data entry); and 2) technical support for pharmacist clinical services (e.g., administering immunizations). This commentary reviews the evidence behind these expanded duties, as well as the key regulatory decision points for each task. The Board's rules and approach may prove useful to other states and even other governing bodies outside the U.S. as they consider similar issues. Copyright © 2017 Elsevier Inc. All rights reserved.
Education and training for technicians in photonics-enabled technologies
NASA Astrophysics Data System (ADS)
Hull, Daniel M.; Hull, Darrell M.
2005-10-01
Within a few years after lasers were first made operational in 1960, it became apparent that rapid growth in the applications of this new technology in industry, health care, and other fields would require a new generation of technicians in laser/optics engineering. Technicians are the men and women who work alongside scientists and engineers in bringing their ideas, designs, and processes to fruition. In America, most highly qualified technicians are graduates of associate of applied science (AAS) programs in community and technical colleges (two-year postsecondary institutions). Curricula and educational programs designed to prepare technicians in laser/electro-optics technology (LEOT) emerged in the 1970s; today there are over 15 LEOT programs in the United States producing over 100 LEOT graduates each year.
40 CFR 745.90 - Renovator certification and dust sampling technician certification.
Code of Federal Regulations, 2010 CFR
2010-07-01
... sampling technician certification. 745.90 Section 745.90 Protection of Environment ENVIRONMENTAL PROTECTION... RESIDENTIAL STRUCTURES Residential Property Renovation § 745.90 Renovator certification and dust sampling technician certification. (a) Renovator certification and dust sampling technician certification. (1) To...
ERIC Educational Resources Information Center
Ohio State Univ., Columbus. Center on Education and Training for Employment.
This document contains 18 units to consider for use in a tech prep competency profile for the occupation of quality control technician. All the units listed will not necessarily apply to every situation or tech prep consortium, nor will all the competencies within each unit be appropriate. Several units appear within each specific occupation and…
ERIC Educational Resources Information Center
Ohio State Univ., Columbus. Center on Education and Training for Employment.
This publication contains 18 subjects appropriate for use in a competency list for the occupation of computer support technician, 1 of 12 12 occupations within the business/computer technologies cluster. Each unit consists of a number of competencies; a list of competency builders is provided for each competency. Titles of the 18 units are as…
National Apprenticeship and Training Standards for Optical Technician (Contact Lens Technician).
ERIC Educational Resources Information Center
Manpower Administration (DOL), Washington, DC. Bureau of Apprenticeship and Training.
A statement of policy of the Contact Lens Society of America regarding contact lens filters is followed by national apprenticeship and training standards for optical technicians approved and adopted by the Contact Lens Society of America in accordance with the basic standards recommended by the Bureau of Apprenticeship and Training of the…
Tsuji, Shintaro; Fukuda, Akihisa; Yagahara, Ayako; Nishimoto, Naoki; Homma, Katsumi; Ogasawara, Katsuhiko
2015-03-01
In 1994, Japanese Society of Radiological Technology (JSRT) constructed the lexicon in the field of radiologic technology. However, recently, latest lexicon is not updated yet. The purpose of this article is to compare the terminologies in clinical medicine with the others and to consider reconstructing the lexicon in the radiological technology. Our study selected three categories from the database of the academic society. These three groups were Clinical medicine (hereafter CM, 167 societies, includes JSRT), Psychology / Education (hereafter P/E, 104 societies), and Comprehensive synthetic engineering (hereafter CSE, 40 societies). First, all societies were surveyed to know whether there were any lexicon in their official website. Second, these terminologies were surveyed on the following criteria: (a) Media of lexicon, (b) Number of terms, (c) File type of lexicon, (d) Terms translated into English, (e) Way of searching terms, and (f) Number of committees of the terminology. Lexicon in CM, P/E, and CSE had 20, 4, and 7. Compared with P/E and CSE, CM showed the following trends: (a) used electronic media frequently, (b) stored large number of terms (about 5,000 to 11,000), (c) enabled to download frequently, and (d) used the alphabet and Japanese syllabary order frequently. Compared with the lexicon of P/E and CSE, terminology in CM tended to adopt the electronic media of lexicon and to have large number of terms. Additionally, many lexicons were expressed in English terms along with Japanese terms. Following massive lexicon of SNOMED-CT and RadLex, it is necessary to consider applying the web-based term searching and an ontological technique to the lexicon of radiological technology.
A Novel Simulation Technician Laboratory Design: Results of a Survey-Based Study
Hughes, Patrick G; Friedl, Ed; Ortiz Figueroa, Fabiana; Cepeda Brito, Jose R; Frey, Jennifer; Birmingham, Lauren E; Atkinson, Steven Scott
2016-01-01
Objective The purpose of this study was to elicit feedback from simulation technicians prior to developing the first simulation technician-specific simulation laboratory in Akron, OH. Background Simulation technicians serve a vital role in simulation centers within hospitals/health centers around the world. The first simulation technician degree program in the US has been approved in Akron, OH. To satisfy the requirements of this program and to meet the needs of this special audience of learners, a customized simulation lab is essential. Method A web-based survey was circulated to simulation technicians prior to completion of the lab for the new program. The survey consisted of questions aimed at identifying structural and functional design elements of a novel simulation center for the training of simulation technicians. Quantitative methods were utilized to analyze data. Results Over 90% of technicians (n=65) think that a lab designed explicitly for the training of technicians is novel and beneficial. Approximately 75% of respondents think that the space provided appropriate audiovisual (AV) infrastructure and space to evaluate the ability of technicians to be independent. The respondents think that the lab needed more storage space, visualization space for a large number of students, and more space in the technical/repair area. Conclusions A space designed for the training of simulation technicians was considered to be beneficial. This laboratory requires distinct space for technical repair, adequate bench space for the maintenance and repair of simulators, an appropriate AV infrastructure, and space to evaluate the ability of technicians to be independent. PMID:27096134
A Novel Simulation Technician Laboratory Design: Results of a Survey-Based Study.
Ahmed, Rami; Hughes, Patrick G; Friedl, Ed; Ortiz Figueroa, Fabiana; Cepeda Brito, Jose R; Frey, Jennifer; Birmingham, Lauren E; Atkinson, Steven Scott
2016-03-16
OBJECTIVE : The purpose of this study was to elicit feedback from simulation technicians prior to developing the first simulation technician-specific simulation laboratory in Akron, OH. Simulation technicians serve a vital role in simulation centers within hospitals/health centers around the world. The first simulation technician degree program in the US has been approved in Akron, OH. To satisfy the requirements of this program and to meet the needs of this special audience of learners, a customized simulation lab is essential. A web-based survey was circulated to simulation technicians prior to completion of the lab for the new program. The survey consisted of questions aimed at identifying structural and functional design elements of a novel simulation center for the training of simulation technicians. Quantitative methods were utilized to analyze data. Over 90% of technicians (n=65) think that a lab designed explicitly for the training of technicians is novel and beneficial. Approximately 75% of respondents think that the space provided appropriate audiovisual (AV) infrastructure and space to evaluate the ability of technicians to be independent. The respondents think that the lab needed more storage space, visualization space for a large number of students, and more space in the technical/repair area. CONCLUSIONS : A space designed for the training of simulation technicians was considered to be beneficial. This laboratory requires distinct space for technical repair, adequate bench space for the maintenance and repair of simulators, an appropriate AV infrastructure, and space to evaluate the ability of technicians to be independent.
The Operating Technician's Role in Video Distance Learning.
ERIC Educational Resources Information Center
Olesinski, Raymond L.; And Others
Operating technicians play a number of roles in video, or televised, distance learning programs, the most obvious being the operation and support of the technology itself. Very little information exists, however, about the non-technical activities of technicians that may influence the instruction process. This paper describes these activities…
Apprenticeship and Training Policy for Dental Laboratory Technicians.
ERIC Educational Resources Information Center
National Association of Dental Labs., Inc., Washington, DC.
The dental technician performs completely one or more specialized areas of the dental laboratory procedures required in the creation of a dental appliance. Policies of the 8000 hour apprenticeship program are explained in terms of qualifications, apprenticeship terms and agreement, ratio of apprentices to technicians, probationary period, credit…
ERIC Educational Resources Information Center
Ohio State Univ., Columbus. Center on Education and Training for Employment.
This document contains 23 units to consider for use in a tech prep competency profile for the occupation of tool and die technician. All the units listed will not necessarily apply to every situation or tech prep consortium, nor will all the competencies within each unit be appropriate. Several units appear within each specific occupation and…
ERIC Educational Resources Information Center
Ohio State Univ., Columbus. Center on Education and Training for Employment.
This publication contains 17 subjects appropriate for use in a competency list for the occupation of network systems technician, 1 of 12 occupations within the business/computer technologies cluster. Each unit consists of a number of competencies; a list of competency builders is provided for each competency. Titles of the 17 units are as follows:…
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1984-09-28
Activities carried out by the American College of Radiology are described. Guidelines on radiographic techniques for radiological technicians were developed. Annual training sessions for technologists and physicians were conducted by the American College of Radiology Task Force on Pneumoconiosis. Regulations for performing chest x rays were reviewed. Program activities such as the 12-point International Labor Organization (ILO) classification scale for diagnosis of coal workers' pneumoconiosis, and the reporting form for use of the 1980 ILO classification system were reviewed. The American College of Radiology maintained liaison between NIOSH and other medical specialty societies such as the American College of Chestmore » Physicians, the College of American Pathologists, the American Medical Association, and the American Osteopathic College of Radiology. The American College of Radiology assisted NIOSH with the initiation, development, and maintenance of a quality control method to monitor and advise physicians on the reading of radiographs.« less
A System Approach to Navy Medical Education and Training. Appendix 15. Biotronics Technicians.
1974-08-31
curricula based upon job analysis was implemented to a level of methodology determination. These methods and curriculum materials constituted a third...Therapy Technician 8495 Dermatology Technician 8496 Embalming Technician 8497 Medical Illustration Technician 8498 Medical Equipment Repair Technician... WET COMPRESSES/SOAKS/PACKS 24 ICONTROL BLEEDING BY PRESSURE DRESSING 25 1APPLY/CHANGE BANDAGES, E.G. ROLLER, TRIANGULAR, KURLEX GO TO RIGHT HAND PAGE
Defining the Simulation Technician Role: Results of a Survey-Based Study.
Bailey, Rachel; Taylor, Regina G; FitzGerald, Michael R; Kerrey, Benjamin T; LeMaster, Thomas; Geis, Gary L
2015-10-01
In health care simulation, simulation technicians perform multiple tasks to support various educational offerings. Technician responsibilities and the tasks that accompany them seem to vary between centers. The objectives were to identify the range and frequency of tasks that technicians perform and to determine if there is a correspondence between what technicians do and what they feel their responsibilities should be. We hypothesized that there is a core set of responsibilities and tasks for the technician position regardless of background, experience, and type of simulation center. We conducted a prospective, survey-based study of individuals currently functioning in a simulation technician role in a simulation center. This survey was designed internally and piloted within 3 academic simulation centers. Potential respondents were identified through a national mailing list, and the survey was distributed electronically during a 3-week period. A survey request was sent to 280 potential participants, 136 (49%) responded, and 73 met inclusion criteria. Five core tasks were identified as follows: equipment setup and breakdown, programming scenarios into software, operation of software during simulation, audiovisual support for courses, and on-site simulator maintenance. Independent of background before they were hired, technicians felt unprepared for their role once taking the position. Formal training was identified as a need; however, the majority of technicians felt experience over time was the main contributor toward developing knowledge and skills within their role. This study represents a first step in defining the technician role within simulation-based education and supports the need for the development of a formal job description to allow recruitment, development, and certification.
Guide for Training Medical Laboratory Technicians. Fourth Edition.
ERIC Educational Resources Information Center
American Medical Technologists, Park Ridge, IL.
This document is intended to assist educators in the development of medical laboratory technician training programs. The following elements are included in the document: (1) an introduction; (2) the American Medical Technologists' Code of Ethics; (3) suggested curricula for medical laboratory technician programs for a 12-month course and an…
Auto Collision Technician: An Instructional Guide for Teachers.
ERIC Educational Resources Information Center
Ohio State Univ., Columbus. Vocational Instructional Materials Lab.
This guide is designed to help teachers in auto collision technician programs for grades 11 and 12 teach the critical competencies of the program. The critical competencies covered are the High Priority-Individual (HP-I) competencies in Ohio's Occupational Competency Assessment Profile (OCAP) for Auto Collision Technician. HP-I competencies are…
Fiber Optics Technician. Curriculum Research Project. Final Report.
ERIC Educational Resources Information Center
Whittington, Herschel K.
A study examined the role of technicians in the fiber optics industry and determined those elements that should be included in a comprehensive curriculum to prepare fiber optics technicians for employment in the Texas labor market. First the current literature, including the ERIC database and equipment manufacturers' journals were reviewed. After…
Standards for Medical Library Technicians, Medical Library Association.
ERIC Educational Resources Information Center
Medical Library Association, Chicago, IL.
A medical library technician is a semiprofessional library employee whose duties require knowledge and skill based on a minimum of two years' general college education that includes library instruction beyond the clerical level. The medical library technician must have a practical knowledge of library functions and services, an understanding of…
OSU-Okmulgee's Orthotics and Prosthetics Technician Program Thrives
ERIC Educational Resources Information Center
Smith, Sharon
2007-01-01
Students in the Orthotics and Prosthetics Technician Program at Oklahoma State University (OSU)-Okmulgee are provided with opportunities to develop multiple skill sets coveted by employers that will land them jobs in the industry as technicians, fitters or pedorthists. The program was recently restructured to become a technically based orthotic…
A Task Analysis of Selected Nuclear Technician Occupations.
ERIC Educational Resources Information Center
Braden, Paul V.; Paul, Krishan K.
A task analysis of nuclear technician occupations in selected organizations in the Southern Interstate Nuclear Board Region was conducted as part of a research and development project leading to a nuclear technician manpower information system for these 17 states. In order to answer 11 questions focusing on task performance frequency and…
5 CFR 841.708 - Special provisions affecting retired military reserve technicians.
Code of Federal Regulations, 2010 CFR
2010-01-01
... military reserve technicians. 841.708 Section 841.708 Administrative Personnel OFFICE OF PERSONNEL... ADMINISTRATION Cost-of-Living Adjustments § 841.708 Special provisions affecting retired military reserve technicians. (a) Military reserve technicians who retire as a result of a medical disability are excepted from...
A Grounded Theory Study of Aircraft Maintenance Technician Decision-Making
NASA Astrophysics Data System (ADS)
Norcross, Robert
Aircraft maintenance technician decision-making and actions have resulted in aircraft system errors causing aircraft incidents and accidents. Aircraft accident investigators and researchers examined the factors that influence aircraft maintenance technician errors and categorized the types of errors in an attempt to prevent similar occurrences. New aircraft technology introduced to improve aviation safety and efficiency incur failures that have no information contained in the aircraft maintenance manuals. According to the Federal Aviation Administration, aircraft maintenance technicians must use only approved aircraft maintenance documents to repair, modify, and service aircraft. This qualitative research used a grounded theory approach to explore the decision-making processes and actions taken by aircraft maintenance technicians when confronted with an aircraft problem not contained in the aircraft maintenance manuals. The target population for the research was Federal Aviation Administration licensed aircraft and power plant mechanics from across the United States. Nonprobability purposeful sampling was used to obtain aircraft maintenance technicians with the experience sought in the study problem. The sample population recruitment yielded 19 participants for eight focus group sessions to obtain opinions, perceptions, and experiences related to the study problem. All data collected was entered into the Atlas ti qualitative analysis software. The emergence of Aircraft Maintenance Technician decision-making themes regarding Aircraft Maintenance Manual content, Aircraft Maintenance Technician experience, and legal implications of not following Aircraft Maintenance Manuals surfaced. Conclusions from this study suggest Aircraft Maintenance Technician decision-making were influenced by experience, gaps in the Aircraft Maintenance Manuals, reliance on others, realizing the impact of decisions concerning aircraft airworthiness, management pressures, and legal concerns
Diploma Training for Chemical Technicians in Australia
NASA Astrophysics Data System (ADS)
Lampard, Mark G.
1999-07-01
We describe aspects of the present and past training of chemical technicians in Australia, with particular reference to that for senior technicians, technical officers, and those anticipating a career in laboratory management (i.e., diploma courses). We refer to the present study pathways for beginning science technicians leading to a full-time (or part-time equivalent) diploma course offered either by the State Departments of Technical and Further Education (TAFE) or by the universities. Credit for appropriate diploma subjects towards a university science degree is available. We emphasize the national unified nature of training according to the Australian Qualifications Framework (AQF), which sets syllabi for subjects in conjunction with the Australian Standards Framework (ASF) levels that depend on such factors as breadth, depth, and complexity of skills and knowledge, range of activities undertaken, degree to which tasks are routine or complex, level of judgment required, and level of autonomy and responsibility for others. Recognition of the two-year diploma with suitable chemical laboratory or technology experience is through the Royal Australian Chemical Institute (RACI), and the letters AT (Associate Technician) RACI denote the new grade of membership of the RACI, the equivalent of the ACS in America. Sample structures for a Certificate IV and Diploma of Chemical Laboratory Technology are given.
Schooley, Benjamin; Hikmet, Neset; Tarcan, Menderes; Yorgancioglu, Gamze
2016-03-01
Studies on the topic of burnout measure the effects of emotional exhaustion (EE), depersonalization (DP) (negative or cynical attitudes toward work), and reduced sense of personal accomplishment (PA). While the prevalence of burnout in practicing emergency medicine (EM) professionals has been studied, little is known of the prevalence and factors across physicians, nurses, technicians, and health information technicians working for the same institution. The aim of this study was to assess burnout differences across EM professional types.The total population of 250 EM professionals at 2 public urban hospitals in Turkey were surveyed using the Maslach Burnout Inventory and basic social- and work-related demographics. Descriptive statistics, ANOVA, and additional post hoc tests were computed.Findings show that EE and DP scores were high across all occupational groups, while scores on PA were low. There was a statistically significant difference between nurses and medical technicians (P < 0.05) for EE; and between physicians and both nurses and medical technicians (P < 0.05) for PA; while no group differences were found for DP. Age, gender, economic well-being, and income level were all significant; while patient load and marital status showed no significance.Burnout can be high across occupational groups in the emergency department. Burnout is important for EM administrators to assess across human resources. Statistically significant differences across socio-demographic groups vary across occupational groups. However, differences between occupational groups may not be explained effectively by the demographic factors assessed in this or other prior studies. Rather, the factors associated with burnout are incomplete and require further institutional, cultural, and organizational analyses including differentiating between job tasks carried out by each EM job type.
Schooley, Benjamin; Hikmet, Neset; Tarcan, Menderes; Yorgancioglu, Gamze
2016-01-01
Abstract Studies on the topic of burnout measure the effects of emotional exhaustion (EE), depersonalization (DP) (negative or cynical attitudes toward work), and reduced sense of personal accomplishment (PA). While the prevalence of burnout in practicing emergency medicine (EM) professionals has been studied, little is known of the prevalence and factors across physicians, nurses, technicians, and health information technicians working for the same institution. The aim of this study was to assess burnout differences across EM professional types. The total population of 250 EM professionals at 2 public urban hospitals in Turkey were surveyed using the Maslach Burnout Inventory and basic social- and work-related demographics. Descriptive statistics, ANOVA, and additional post hoc tests were computed. Findings show that EE and DP scores were high across all occupational groups, while scores on PA were low. There was a statistically significant difference between nurses and medical technicians (P < 0.05) for EE; and between physicians and both nurses and medical technicians (P < 0.05) for PA; while no group differences were found for DP. Age, gender, economic well-being, and income level were all significant; while patient load and marital status showed no significance. Burnout can be high across occupational groups in the emergency department. Burnout is important for EM administrators to assess across human resources. Statistically significant differences across socio-demographic groups vary across occupational groups. However, differences between occupational groups may not be explained effectively by the demographic factors assessed in this or other prior studies. Rather, the factors associated with burnout are incomplete and require further institutional, cultural, and organizational analyses including differentiating between job tasks carried out by each EM job type. PMID:26962780
Highway Surveying. Instructor's Guide for an Adult Course. Highway Technicians Program Unit III.
ERIC Educational Resources Information Center
Fimmano, Ralph; Kacharian, John C.
The revised instructor's guide, which is part of the New York State Highway Technician's Program to provide needed technicians and engineers by upgrading people in the lower-level technician jobs, is geared toward the improvement of technical skills and knowledge in highway surveying. In view of the shortage of qualified technicians and engineers…
Electromechanical Technician Skills Questionnaire.
ERIC Educational Resources Information Center
Anoka-Hennepin Technical Coll., Minneapolis, MN.
This document contains test items to measure the job skills of electromechanical technicians. Questions are organized in four sections that cover the following topics: (1) shop math; (2) electricity and electronics; (3) mechanics and machining; and (4) plumbing, heating, ventilation and air conditioning, and welding skills. Questions call for…
Robotics/Automated Systems Technicians.
ERIC Educational Resources Information Center
Doty, Charles R.
Major resources exist that can be used to develop or upgrade programs in community colleges and technical institutes that educate robotics/automated systems technicians. The first category of resources is Economic, Social, and Education Issues. The Office of Technology Assessment (OTA) report, "Automation and the Workplace," presents analyses of…
Best possible medication history for hemodialysis patients obtained by a pharmacy technician.
Leung, Marianna; Jung, Joanne; Lau, Wynnie; Kiaii, Mercedeh; Jung, Beverly
2009-09-01
Outpatients undergoing hemodialysis are at high risk for adverse drug events. Limited resources make it challenging for pharmacists to routinely obtain a best possible medication history (BPMH). The primary objective was to determine whether, for patients undergoing hemodialysis, a pharmacy technician has the skills to obtain a BPMH that would allow a pharmacist to identify drug-related problems. The secondary objectives were to determine the number and types of medication discrepancies and drug-related problems identified and the time required by the technician to complete the BPMH. All patients treated in the hemodialysis unit during the study period were included, except for those who required an interpreter or were unable to participate in an in-person interview. A single technician was taught how to interview patients according to a structured format. For each patient, the technician's BMPH was verified by a pharmacist. The agreement rate between technician and pharmacists was determined, along with the number and types of discrepancies and drug-related problems identified. The technician interviewed 99 patients. Of the 1334 medication orders reviewed, the technician and pharmacists agreed on all but 15 (agreement rate 98.9%). A total of 358 medication discrepancies were noted for 93 patients (3.8 discrepancies per patient). Of these, 210 (59%) were undocumented intentional discrepancies, and 148 (41%) were unintentional discrepancies (most commonly errors of commission). Of the 135 drug-related problems identified, the majority involved dosing problems or nonadherence. The technician required an average of 17 min for each interview. An adequately trained technician was capable of interviewing patients to create a BPMH. A variety of medication discrepancies and drug-related problems were identified. Generation of a BPMH by a technician is a useful approach allowing pharmacists to identify drug-related problems.
ERIC Educational Resources Information Center
Mid-East Ohio Tech Prep Consortium, Zanesville.
This document contains competency profiles in four areas: computer-aided drafting and design; industrial manufacturing technician; mechanical engineering technician; and machine tool, die, and moldmaking technology occupations. The profiles are intended for use in articulating tech prep programs from high school through associate degrees in Ohio.…
Veterinary Technician Program Director Leadership Style and Program Success
ERIC Educational Resources Information Center
Renda-Francis, Lori A.
2012-01-01
Program directors of American Veterinary Medical Association (AVMA) accredited veterinary technician programs may have little or no training in leadership. The need for program directors of AVMA-accredited veterinary technician programs to understand how leadership traits may have an impact on student success is often overlooked. The purpose of…
Description and comparison of pharmacy technician training programs in the United States.
Anderson, Douglas C; Draime, Juanita A; Anderson, Timothy S
2016-01-01
To describe pharmacy technician training programs in the United States and to compare pharmacy technician program characteristics between programs with and without a pharmacist on faculty and between programs with different accreditation status. Descriptive, cross-sectional study. Not applicable. United States pharmacy technician programs. Not applicable. Student class size, faculty credentials, coursework components, program length, tuition rates, and admission criteria. Currently, there are more than 698 pharmacy technician programs across 1114 campuses, with complete data available for 216 programs. Programs varied widely in terms of class sizes, faculty credentials, and admission criteria. Programs with pharmacists on faculty were significantly less expensive than were those without pharmacists (P = 0.009). Accreditation had no impact on tuition prices. This is the first study of its kind to describe and characterize pharmacy technician training programs. There is relatively little control of technician training by the profession of pharmacy. The quality of these programs in terms of student outcomes is unknown, and it should be explored. Rigorous debate and discussion is needed regarding the future of pharmacy technician roles and the training required for those roles. Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.
NASA Astrophysics Data System (ADS)
Ighravwe, D. E.; Oke, S. A.; Adebiyi, K. A.
2016-06-01
The growing interest in technicians' workloads research is probably associated with the recent surge in competition. This was prompted by unprecedented technological development that triggers changes in customer tastes and preferences for industrial goods. In a quest for business improvement, this worldwide intense competition in industries has stimulated theories and practical frameworks that seek to optimise performance in workplaces. In line with this drive, the present paper proposes an optimisation model which considers technicians' reliability that complements factory information obtained. The information used emerged from technicians' productivity and earned-values using the concept of multi-objective modelling approach. Since technicians are expected to carry out routine and stochastic maintenance work, we consider these workloads as constraints. The influence of training, fatigue and experiential knowledge of technicians on workload management was considered. These workloads were combined with maintenance policy in optimising reliability, productivity and earned-values using the goal programming approach. Practical datasets were utilised in studying the applicability of the proposed model in practice. It was observed that our model was able to generate information that practicing maintenance engineers can apply in making more informed decisions on technicians' management.
Ask not what your technician can do for you-ask what you can do for your technician.
Ganderton, L
2018-04-27
Historically, the vital roles played by technicians in Higher Education have had little recognition. Job opportunities are often overlooked by those who have no working knowledge of such organisations and poorly defined career pathways mean that it may not be a first choice for well-qualified, ambitious individuals. With just over a third of all Higher Education technicians in the UK now due to retire in the next 10 to 15 years, fundamental changes are needed, both to attract large numbers of people into vacant roles and to retain current technical staff.National initiatives, founded and driven by charitable and professional bodies, are currently working to address the issues of technicians within Higher Education. Organisations have been urged to take action or face potential recruitment difficulties and skills gaps over the coming years. In light of these national campaigns, institutions across the UK are beginning to develop proper structured career pathways, provide professional development and improve recognition for the work of their technical workforce. Whilst these are encouraging signs, only time will tell if enough has been done to raise both the profile and appeal of a technical career in Higher Education.
Comparison of exercise blood pressure measured by technician and an automated system.
Garcia-Gregory, J A; Jackson, A S; Studeville, J; Squires, W G; Owen, C A
1984-05-01
We evaluated the automated system Blood Pressure Measuring System (BPMS) developed by NASA on 277 adult males who elected to have a treadmill test as part of their annual physical. The BPMS uses acoustic transduction with a computer-assisted ECG gating to detect nonsynchronous noise. The BPMS readings were compared to pressures simultaneously measured by trained technicians. For all stages of work, BPMS readings were higher for systolic and lower for diastolic than technician readings. At peak stages of work, BPMS systolic pressures were about 20 mmHg higher than technician readings. Within each 3-min workstage, BPMS readings were found to be more inconsistent than technician readings. The standard errors of measurement for BPMS were from two to three times higher than technician values. These data showed automated blood pressure readings were significantly different than technician values and subject to more random fluctuations. These findings demonstrate the need to view exercise blood pressure measured by automated systems with caution.
Technicians, Education and Equity--With the Benefit of Foresight?
ERIC Educational Resources Information Center
Imrie, Bradford W.
This paper considers the sources and education of an adequate supply of technicians to ensure New Zealand's technological future. It deals with such questions as the source of technicians, and what their learning experiences and outcomes should be. Included in the paper are specific sections dealing with: (1) "Authority for Advanced…
Yanagita, Satoshi; Imahana, Masato; Suwa, Kazuaki; Sugimura, Hitomi; Nishiki, Masayuki
2016-01-01
Japanese Society of Radiological Technology (JSRT) standard digital image database contains many useful cases of chest X-ray images, and has been used in many state-of-the-art researches. However, the pixel values of all the images are simply digitized as relative density values by utilizing a scanned film digitizer. As a result, the pixel values are completely different from the standardized display system input value of digital imaging and communications in medicine (DICOM), called presentation value (P-value), which can maintain a visual consistency when observing images using different display luminance. Therefore, we converted all the images from JSRT standard digital image database to DICOM format followed by the conversion of the pixel values to P-value using an original program developed by ourselves. Consequently, JSRT standard digital image database has been modified so that the visual consistency of images is maintained among different luminance displays.
Evaluating the accuracy of technicians and pharmacists in checking unit dose medication cassettes.
Ambrose, Peter J; Saya, Frank G; Lovett, Larry T; Tan, Sandy; Adams, Dale W; Shane, Rita
2002-06-15
The accuracy rates of board-registered pharmacy technicians and pharmacists in checking unit dose medication cassettes in the inpatient setting at two separate institutions were examined. Cedars-Sinai Medical Center and Long Beach Memorial Medical Center, both in Los Angeles county, petitioned the California State Board of Pharmacy to approve a waiver of the California Code of Regulations to conduct an experimental program to compare the accuracy of unit dose medication cassettes checked by pharmacists with that of cassettes checked by trained, certified pharmacy technicians. The study consisted of three parts: assessing pharmacist baseline checking accuracy (Phase I), developing a technician-training program and certifying technicians who completed the didactic and practical training (Phase II), and evaluating the accuracy of certified technicians checking unit dose medication cassettes as a daily function (Phase III). Twenty-nine pharmacists and 41 technicians (3 of whom were pharmacy interns) participated in the study. Of the technicians, all 41 successfully completed the didactic and practical training, 39 successfully completed the audits and became certified checkers, and 2 (including 1 of the interns) did not complete the certification audits because they were reassigned to another work area or had resigned. In Phase II, the observed accuracy rate and its lower confidence limit exceeded the predetermined minimum requirement of 99.8% for a certified checker. The mean accuracy rates for technicians were identical at the two institutions (p = 1.0). The difference in mean accuracy rates between pharmacists (99.52%; 95% confidence interval [CI] 99.44-99.58%) and technicians, (99.89%; 95% CI 99.87-99.90%) was significant (p < 0.0001). Inpatient technicians who had been trained and certified in a closely supervised program that incorporated quality assurance mechanisms could safely and accurately check unit dose medication cassettes filled by other technicians.
De Jong, Marla J; Dukes, Susan F; Dufour, Karey M; Mortimer, Darcy L
2017-01-01
The clinical experience and preferred learning style of U.S. Air Force flight nurses and aeromedical evacuation technicians are unknown. Using a cross-sectional survey design, we gathered data regarding the clinical experience, level of comfort providing clinical care, and preferred learning style of 77 active duty (AD), Air Force Reserve (AFR), and Air National Guard (ANG) nurses enrolled in the U.S. Air Force School of Aerospace Medicine Flight Nurse course, and 121 AD, AFR, and ANG medical technicians enrolled in the Aeromedical Evacuation Technician course. Nurses and medical technicians reported 7.6 ± 5.5 and 3.9 ± 4.5 yr of experience, respectively. AD, AFR, and ANG nurses had comparable years of experience: 5.8 ± 3.2, 8.3 ± 6.6, and 7.9 ± 4.2 yr, respectively; however, AD medical technicians had more years of experience (5.6 ± 4.4 yr) than AFR (3.1 ± 4.8 yr) and ANG (1.9 ± 2.8 yr) medical technicians. Both nurses and medical technicians reported infrequently caring for patients with various disease processes and managing equipment or devices that they will routinely encounter when transporting patients as an aeromedical evacuation clinician. Nurses and medical technicians preferred a kinesthetic learning style or a multimodal learning style that included kinesthetic learning. Nearly all (99%) nurses and 97% of medical technicians identified simulation as their preferred teaching method. These findings confirm faculty concerns regarding the clinical experience of flight nurse and aerospace evacuation technician students.De Jong MJ, Dukes SF, Dufour KM, Mortimer DL. Clinical experience and learning style of flight nurse and aeromedical evacuation technician students. Aerosp Med Hum Perform. 2017; 88(1):23-29.
Establishing a clinical pharmacy technician at a United States Army military treatment facility.
Evans, Jennifer L; Gladd, Ellen M; Gonzalez, Alicia C; Tranam, Salman; Larrabee, Joni M; Lipphardt, Sarah E; Chen, Tina T; Ronn, Michael D; Spain, John
2016-01-01
To describe the creation of a clinical pharmacy technician position within the U.S. Army and to identify the personal skills and characteristics required to meet the demands of this role. An outpatient military treatment facility located in Maryland. The clinical pharmacy technician position was designed to support clinical pharmacy services within a patient-centered medical home. Funding and a position description were established to hire a clinical pharmacy technician. Expected duties included administrative (45%), patient education (30%), and dispensing (25%). Local policy, in accordance with federal law and U.S. Army regulations, was developed to define the expanded technician responsibility to deliver patient medication education. In the initial 3 months, the clinical pharmacy technician spent 24 hours per week on clinical activities, affording an additional 10-15 hours per week for clinical pharmacists to provide patient care. Completed consults increased from 41% to 56%, and patient-pharmacist encounters increased from 240 to 290 per month. The technician, acting as a clinical pharmacist extender, also completed an average of 90 patient encounters independently each month. As a result of these improvements, the decision was made to hire a second technician. Currently, the technicians spend 28-40 hours per week on clinical activities, offsetting an average of 26 hours per week for the clinical pharmacists. A patient-centered medical home clinical pharmacy technician can reduce the administrative workload for clinical pharmacists, improve their efficiency, and enhance the use of clinical pharmacy services. Several characteristics, particularly medication knowledge, make pharmacy technicians particularly suited for this role. The results from the implementation of a clinical pharmacy technician at this military treatment facility resulted in an Army-wide expansion of the position and suggested applicability in other practice sites, particularly in federal
Science and Engineering Technician Curriculum Development Project. Final Report.
ERIC Educational Resources Information Center
Mowery, Donald R.; Wolf, Lawrence J.
Project SET (Science and Engineering for Technicians) developed a series of study guides designed to teach generic science and engineering skills to students interested in becoming technicians. An entire 2-year curriculum is encompassed by these guides, geared for 2-year college students. Described in this final report are the project's rationale,…
[Analysis of subjective symptoms of upper extremities in dental technicians].
Yoshida, H; Nagata, C; Mirbod, S M; Iwata, H; Inaba, R
1991-01-01
Our review of the literature showed no report on the subjective symptoms of the upper extremities in dental technicians. This study was therefore undertaken on 164 dental technicians in Gifu Prefecture to investigate the relationship between the subjective symptoms of the hands, arms and shoulders and work of dental technicians. The following results were obtained. 1) The prevalence of Raynaud's phenomenon and numbness of the fingers was 5.5 and 18.5 %, respectively. A significant positive correlation was observed between the prevalence and frequency of numbness and cold sensation in the fingers and the daily usage time (h) of high-speed type machines. In addition, pain in the fingers and around the wrists, and pain and numbness in the arms were significantly related to the daily usage time (h) of low-speed type machines. These results suggest that the usage of high- and low-speed type machines may be a cause of vibration syndrome among dental technicians. 2) A high prevalence of pain in the shoulders (30.8%), neck (30.1%), and back (36.3%) was observed in dental technicians. It is considered that these symptoms are related to the working posture and usage of machines.
Job satisfaction and patient care practices of hemodialysis nurses and technicians.
Perumal, Seena; Sehgal, Ashwini R
2003-10-01
The quality of hemodialysis care has been the focus of intense scrutiny, yet little is known about the job satisfaction of the nurses and technicians providing this care. We identified 240 nurses and technicians from 307 randomly selected American facilities and asked them about (a) specific domains of job satisfaction, (b) overall job satisfaction, and (c) self-reported patient care practices. Fewer than half of nurses and technicians were satisfied with their pay or their opportunities for advancement. Almost all subjects were satisfied with their personal delivery of patient care, their chance to do things for others, and their job security. About three-fourths of nurses and technicians expressed overall satisfaction with their jobs. Higher job satisfaction was associated with increased attention to patient psychosocial and educational needs. We urge local and national associations of nurses and technicians to collaborate with dialysis facilities, chains, and regulatory agencies to address specific aspects of job satisfaction.
Widjanarko, Bagoes; Widyastari, Dyah Anantalia; Martini, Martini; Ginandjar, Praba
2016-01-01
Detection of acid-fast bacilli in respiratory specimens serves as an initial pulmonary tuberculosis (TB) diagnosis. Laboratories are the essential and fundamental part of all health systems. This study aimed to describe how laboratory technicians perceived their own self and work. This included perceived self-efficacy, perceived role, perceived equipment availability, perceived procedures, perceived reward and job, and perceived benefit of health education, as well as level of knowledge and attitudes related to work performance of laboratory technicians. This was a cross-sectional quantitative study involving 120 laboratory technicians conducted in Central Java. Interviews and observation were conducted to measure performance and work-related variables. Among 120 laboratory technicians, 43.3% showed fairly good performance. They complied with 50%-75% of all procedures, including sputum collection, laboratory tools utilization, sputum smearing, staining, smear examination, grading of results, and universal precaution practice. Perceived role, perceived self-efficacy, and knowledge of laboratory procedures were significantly correlated to performance, besides education and years of working as a laboratory technician. Perceived equipment availability was also significantly correlated to performance after the education variable was controlled. Most of the laboratory technicians believed that they have an important role in TB patients' treatment and should display proper self-efficacy in performing laboratory activities. The result may serve as a basic consideration to develop a policy for enhancing motivation of laboratory technicians in order to improve the TB control program.
Widjanarko, Bagoes; Widyastari, Dyah Anantalia; Martini, Martini; Ginandjar, Praba
2016-01-01
Purpose Detection of acid-fast bacilli in respiratory specimens serves as an initial pulmonary tuberculosis (TB) diagnosis. Laboratories are the essential and fundamental part of all health systems. This study aimed to describe how laboratory technicians perceived their own self and work. This included perceived self-efficacy, perceived role, perceived equipment availability, perceived procedures, perceived reward and job, and perceived benefit of health education, as well as level of knowledge and attitudes related to work performance of laboratory technicians. Methods This was a cross-sectional quantitative study involving 120 laboratory technicians conducted in Central Java. Interviews and observation were conducted to measure performance and work-related variables. Results Among 120 laboratory technicians, 43.3% showed fairly good performance. They complied with 50%–75% of all procedures, including sputum collection, laboratory tools utilization, sputum smearing, staining, smear examination, grading of results, and universal precaution practice. Perceived role, perceived self-efficacy, and knowledge of laboratory procedures were significantly correlated to performance, besides education and years of working as a laboratory technician. Perceived equipment availability was also significantly correlated to performance after the education variable was controlled. Conclusion Most of the laboratory technicians believed that they have an important role in TB patients’ treatment and should display proper self-efficacy in performing laboratory activities. The result may serve as a basic consideration to develop a policy for enhancing motivation of laboratory technicians in order to improve the TB control program. PMID:27660502
Microcomputer Software Technician Curriculum.
ERIC Educational Resources Information Center
EASTCONN Regional Educational Services Center, North Windham, CT.
This curriculum guide, developed for high schools in Connecticut, outlines a 4-year program for training microcomputer software technicians. Following a list of nine general objectives of the program, the guide provides a list of competencies that students are expected to develop in each of the courses of the 4-year program. The guide then…
Career Directions--Electronics Technician
ERIC Educational Resources Information Center
Tech Directions, 2012
2012-01-01
Electronics technicians (ETs) work with electronics engineers to set up and maintain complicated electronics equipment that many of today's businesses rely on. The field is varied. An ET might service the industrial controls on a factory floor. Or repair missile control systems for the government. Or an ET could specialize in cars and trucks,…
ERIC Educational Resources Information Center
Carangelo, Pasquale R.; Janeczek, Anthony J.
Materials are provided for a two-semester digital and microprocessor technician postgraduate program. Prerequisites stated for the program include a background in DC and AC theory, solid state devices, basic circuit fundamentals, and basic math. A chronology of major topics and a listing of course objectives appear first. Theory outlines for each…
Experience with a pharmacy technician medication history program.
Cooper, Julie B; Lilliston, Michelle; Brooks, DeAnne; Swords, Bruce
2014-09-15
The implementation and outcomes of a pharmacy technician medication history program are described. An interprofessional medication reconciliation team, led by a clinical pharmacist and a clinical nurse specialist, was charged with implementing a new electronic medication reconciliation system to improve compliance with medication reconciliation at discharge and capture compliance-linked reimbursement. The team recommended that the pharmacy department be allocated new pharmacy technician full-time-equivalent positions to assume ownership of the medication history process. Concurrent with the implementation of this program, a medication history standard was developed to define rules for documentation of what a patient reports he or she is actually taking. The standard requires a structured interview with the patient or caregiver and validation with outside sources as indicated to determine which medications to document in the medication history. The standard is based on four medication administration category rules: scheduled, as-needed, short-term, and discontinued medications. The medication history standard forms the core of the medication history technician training and accountability program. Pharmacy technicians are supervised by pharmacists, using a defined accountability plan based on a set of medical staff approved rules for what medications comprise a best possible medication history. Medication history accuracy and completeness rates have been consistently over 90% and rates of provider compliance with medication reconciliation rose from under 20% to 100% since program implementation. A defined medication history based on a medication history standard served as an effective foundation for a pharmacy technician medication history program, which helped improve provider compliance with discharge medication reconciliation. Copyright © 2014 by the American Society of Health-System Pharmacists, Inc. All rights reserved.
Aviation Electronics Technician 3 and 2. Rate Training Manual.
ERIC Educational Resources Information Center
Bureau of Naval Personnel, Washington, DC.
The manual is designed as a self-study text for use by personnel of the Navy and Naval Reserve who are preparing to meet professional requirements for advancement in the rating of Aviation Electronics Technician. The document opens with a review of leadership and qualifications for the Aviation Electronics Technician rating. Other chapters cover…
40 CFR 82.161 - Technician certification.
Code of Federal Regulations, 2013 CFR
2013-07-01
... (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Recycling and Emissions Reduction § 82.161 Technician... proper procedures for recovering and/or recycling refrigerant. Failure to demonstrate or failure to...
40 CFR 82.161 - Technician certification.
Code of Federal Regulations, 2012 CFR
2012-07-01
... (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Recycling and Emissions Reduction § 82.161 Technician... proper procedures for recovering and/or recycling refrigerant. Failure to demonstrate or failure to...
40 CFR 82.161 - Technician certification.
Code of Federal Regulations, 2014 CFR
2014-07-01
... (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Recycling and Emissions Reduction § 82.161 Technician... proper procedures for recovering and/or recycling refrigerant. Failure to demonstrate or failure to...
40 CFR 82.161 - Technician certification.
Code of Federal Regulations, 2011 CFR
2011-07-01
... (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Recycling and Emissions Reduction § 82.161 Technician... proper procedures for recovering and/or recycling refrigerant. Failure to demonstrate or failure to...
40 CFR 82.161 - Technician certification.
Code of Federal Regulations, 2010 CFR
2010-07-01
... (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Recycling and Emissions Reduction § 82.161 Technician... proper procedures for recovering and/or recycling refrigerant. Failure to demonstrate or failure to...
Best Possible Medication History for Hemodialysis Patients Obtained by a Pharmacy Technician
Leung, Marianna; Jung, Joanne; Lau, Wynnie; Kiaii, Mercedeh; Jung, Beverly
2009-01-01
Background: Outpatients undergoing hemodialysis are at high risk for adverse drug events. Limited resources make it challenging for pharmacists to routinely obtain a best possible medication history (BPMH). Objectives: The primary objective was to determine whether, for patients undergoing hemodialysis, a pharmacy technician has the skills to obtain a BPMH that would allow a pharmacist to identify drug-related problems. The secondary objectives were to determine the number and types of medication discrepancies and drug-related problems identified and the time required by the technician to complete the BPMH. Methods: All patients treated in the hemodialysis unit during the study period were included, except for those who required an interpreter or were unable to participate in an in-person interview. A single technician was taught how to interview patients according to a structured format. For each patient, the technician’s BMPH was verified by a pharmacist. The agreement rate between technician and pharmacists was determined, along with the number and types of discrepancies and drug-related problems identified. Results: The technician interviewed 99 patients. Of the 1334 medication orders reviewed, the technician and pharmacists agreed on all but 15 (agreement rate 98.9%). A total of 358 medication discrepancies were noted for 93 patients (3.8 discrepancies per patient). Of these, 210 (59%) were undocumented intentional discrepancies, and 148 (41%) were unintentional discrepancies (most commonly errors of commission). Of the 135 drug-related problems identified, the majority involved dosing problems or nonadherence. The technician required an average of 17 min for each interview. Conclusion: An adequately trained technician was capable of interviewing patients to create a BPMH. A variety of medication discrepancies and drug-related problems were identified. Generation of a BPMH by a technician is a useful approach allowing pharmacists to identify drug
Technicians complete assembly of Hubble Space Telescope (HST) mockup at JSC
NASA Technical Reports Server (NTRS)
1989-01-01
Technicians complete assembly of the Hubble Space Telescope (HST) mockup at JSC's Mockup and Integration Laboratory (MAIL) Bldg 9A. In the foreground, a technician holds the controls for an overhead crane attached to one of the HST's high gain antennas (HGAs). Technicians on the ground prepare the HGA to be hoisted into position on the mockup's Support System Module (SSM) forward shell as others work on SSM from a cherry picker.
14 CFR 65.80 - Certificated aviation maintenance technician school students.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 14 Aeronautics and Space 2 2013-01-01 2013-01-01 false Certificated aviation maintenance technician school students. 65.80 Section 65.80 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... § 65.80 Certificated aviation maintenance technician school students. Whenever an aviation maintenance...
14 CFR 65.80 - Certificated aviation maintenance technician school students.
Code of Federal Regulations, 2012 CFR
2012-01-01
... 14 Aeronautics and Space 2 2012-01-01 2012-01-01 false Certificated aviation maintenance technician school students. 65.80 Section 65.80 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... § 65.80 Certificated aviation maintenance technician school students. Whenever an aviation maintenance...
14 CFR 65.80 - Certificated aviation maintenance technician school students.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 14 Aeronautics and Space 2 2011-01-01 2011-01-01 false Certificated aviation maintenance technician school students. 65.80 Section 65.80 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... § 65.80 Certificated aviation maintenance technician school students. Whenever an aviation maintenance...
14 CFR 65.80 - Certificated aviation maintenance technician school students.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Certificated aviation maintenance technician school students. 65.80 Section 65.80 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... § 65.80 Certificated aviation maintenance technician school students. Whenever an aviation maintenance...
14 CFR 65.80 - Certificated aviation maintenance technician school students.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 14 Aeronautics and Space 2 2014-01-01 2014-01-01 false Certificated aviation maintenance technician school students. 65.80 Section 65.80 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... § 65.80 Certificated aviation maintenance technician school students. Whenever an aviation maintenance...
Solar Technician Program Blows Hot
ERIC Educational Resources Information Center
Ziegler, Peg Moran
1977-01-01
A training program for solar heating technicians was initiated at Sonoma State College's School of Environmental Studies for CETA applicants. Among the projects designed and built were a solar alternative energy center, a solar hot water system, and a solar greenhouse. (MF)
ChemTechLinks: Alliances for Chemical Technician Education
NASA Astrophysics Data System (ADS)
Nameroff, Tamara
2003-09-01
ChemTechLinks (CTL) is a project of the American Chemical Society (ACS) Educational and International Activities Division and funded by the National Science Foundation to support and advance chemistry-based technician education. The project aims to help improve technician education programs, foster academic-industry alliances, provide professional development opportunities for faculty, and increase student recruitment into chemical technology. The CTL Web site serves as an information clearinghouse and link to other ACS resources and programs, including a Web-based, Voluntary Industry Standards (VIS) database, the Chemistry Technician Program Approval Service, the College Chemistry Consultants Service, summer workshops for high school teachers and two-year college faculty that emphasize a technology-oriented curriculum, scholarships for two-year college faculty to attend ACS Short Courses, a self-study instructional guide for faculty to use in preparing for classroom instruction, and information and free recruitment materials about career opportunities in chemistry technology.
Becker, Steven M
2013-11-01
In response to the March 2011 earthquake-tsunami disaster and the Fukushima Dai-ichi nuclear accident, a special nongovernmental Radiological Emergency Assistance Mission flew to Japan from the United States. Invited by one of Japan's largest hospital and healthcare groups and facilitated by a New York-based international disaster relief organization, the mission included an emergency physician, a health physicist, and a disaster management specialist. During the 10 d mission, team members conducted fieldwork in areas affected by the earthquake, tsunami, and nuclear accident; went to cities and towns in the 20-30 km Emergency Evacuation Preparation Zone around the damaged nuclear plant; visited other communities affected by the nuclear accident; went to evacuation shelters; met with mayors and other local officials; met with central government officials; exchanged observations, experiences, and information with Japanese medical, emergency response, and disaster management colleagues; and provided radiological information and training to more than 1,100 Japanese hospital and healthcare personnel and first responders. The mission produced many insights with potential relevance for radiological/nuclear emergency preparedness and response. The first "lessons learned" were published in December 2011. Since that time, additional broad insights from the mission and mission followup have been identified. Five of these new lessons, which focus primarily on community impacts and responses and public communication issues, are presented and discussed in this article.
Ham, YoungYoon; Gerrity, Theresa M.
2017-01-01
Background: Collection of a complete and accurate medication history is an essential component of the medication reconciliation process. The role of pharmacy technicians in supporting medication reconciliation has been the subject of recent interest. Purpose: The purpose of this article is to review the existing literature on pharmacy technician involvement in the medication reconciliation process and to summarize outcomes on the quality and accuracy of pharmacy technician–collected medication histories. Method: A literature review was conducted using MEDLINE and Academic Search Premier (1948 – April 2015). Results: Sixteen papers were identified, with 12 containing a formal evaluation of outcomes. Three were purely descriptive, and 9 compared the pharmacy technician's performance to pharmacists, nurses, physicians, and/or interdisciplinary teams. Studies used a variety of endpoints, but they demonstrated similar or improved outcomes by engaging pharmacy technicians. Evidence demonstrates that trained pharmacy technicians are able to gather medication histories with similar completeness and accuracy to other health care professionals. Conclusion: The use of pharmacy technicians may be a viable strategy for developing and expanding medication reconciliation processes with appropriate supervision. Future efforts should focus on evaluating the impact of expanded roles for pharmacy technicians in the health care system; assessing the need for standardization of pharmacy technician education, training, and certification; and obtaining clarification from state pharmacy boards regarding these expanded roles. PMID:28179740
Apprenticeship Training: Communication Technician Program.
ERIC Educational Resources Information Center
Alberta Learning, Edmonton. Apprenticeship and Industry Training.
This document presents information about the apprenticeship training program of Alberta, Canada, in general and the communication technician program in particular. The first part of the document discusses the following items: Alberta's apprenticeship and industry training system; the apprenticeship and industry training committee structure; local…
Section 608 Technician Certification Test Topics
Identifies some of the topics covered on Section 608 Technician Certification tests such as ozone depletion, the Clean Air Act and Montreal Protocol, Substitute Refrigerants and oils, Refrigeration and Recovery Techniques.
Japanese Competitiveness and Japanese Management.
ERIC Educational Resources Information Center
Minabe, Shigeo
1986-01-01
Analyzes and compares Japanese and American industrial policy and labor practices. Proposes that certain aspects of the Japanese system be adapted by American businesses for purpose of increasing international competitiveness. Proposes specific actions and plans for both the Japanese and American systems. (ML)
Technicians test OV-102's aft fuselage LRU hydrogen recirculation pump
NASA Technical Reports Server (NTRS)
1990-01-01
Donald C. Buckner, a Lockheed mechanical lead technician, installs an aft fuselage line replaceable unit (LRU) liquid hydrogen recirculation pump from Columbia, Orbiter Vehicle (OV) 102 into JSC's Thermochemical Test Area (TTA) Support Laboratory Bldg 350 test stand. Technicians ran the pump package through the battery of leak tests. Preliminary indications showed only minor, acceptable leakage from the package and Kennedy Space Center (KSC) technicians have replaced a crushed seal on the prevalve of the main propulsion system they believe may have caused the STS-35 hydrogen leak. In addition to Buckner, (left to right) Larry Kilbourn, a Rockwell Service Center lead mechanical technician from Cape Canaveral, and John Dickerson, a quality inspector with EBASCO Services, also monitored the test at JSC. Photo taken by JSC photographer Benny Benavides.
Raising the Standard. Electronics Technician Skills for Today and Tomorrow.
ERIC Educational Resources Information Center
Electronic Industries Foundation, Washington, DC.
This manual identifies the standard skills required of a work-ready, entry-level electronics technician. It provides a valuable resource for these groups: students considering careers as electronics technicians; for counselors, educators, and administrators; and for employers. An introduction discusses use of the standards and includes two lists…
The Library Technician Programme in Lebanon
ERIC Educational Resources Information Center
Rafidi, Samia
1973-01-01
A description of the library technician program established by the Beirut College for Women in February 1970: its curriculum, professional staff, students, and reactions produced by the program is presented. (Author/SJ)
Dental technician pneumoconiosis mimicking pulmonary tuberculosis: a case report.
Tan, Han Loong; Faisal, Mohamed; Soo, Chun Ian; Ban, Andrea Y L; Manap, Roslina Abdul; Hassan, Tidi M
2016-09-07
Dental laboratory technicians are at risk of developing occupational respiratory diseases due to exposure to various potentially toxic substances in their working environment. Since 1939, few cases of silicosis among dental technician have been reported. We illustrate a 38 year-old female, who worked in a dental laboratory for 20 years, initially treated as pulmonary tuberculosis and chronic necrotising aspergillosis without much improvement. Computed tomography guided lung biopsy and bronchoscopic transbronchial lung biopsy were performed. Lung tissue biopsies showed presence of refractile dental materials within the areas of histiocyte proliferation. The diagnosis of dental technician pneumoconiosis was obtained and our patient underwent pulmonary rehabilitation. This case highlights the importance of obtaining a detailed occupational history in tuberculosis endemic area, as pulmonary tuberculosis is a great mimicker of other respiratory diseases.
Technician Career Opportunities in Engineering Technology.
ERIC Educational Resources Information Center
Engineers' Council for Professional Development, New York, NY.
Career opportunities for engineering technicians are available in the technologies relating to air conditioning, heating, and refrigeration, aviation and aerospace, building construction, chemical engineering, civil engineering, electrical engineering, electronics, industrial engineering, instrumentation, internal combustion engines, mechanical…
Desselle, Shane P; Hoh, Ryan; Holmes, Erin R; Gill, Amanpreet; Zamora, Lemuel
2017-07-15
The roles of pharmacy technicians are increasingly prominent given pharmacy's transition to patient-centered activities and evolving scopes of practice in many U.S. states and throughout the world. The aims of this study were to assess U.S. pharmacy technicians' self-efficacies for and attitudes toward performing current and emerging roles in hospital and in community pharmacy and to identify factors related to pharmacy technician self-efficacies in these roles. A total of 5000 pharmacy technicians from 8 U.S. states were sent an electronic survey eliciting data on current involvement, self-efficacies, and attitudes for practicing in an expansive list of practice activities. The 8 states from which the sample was drawn were selected from a stratified randomized procedure using U.S. Census Bureau geographically defined regions. Pre-notification and response reminders were employed. Data were analyzed descriptively and with univariate, inferential tests, as appropriate, to determine associations with commitment, practice environment, experience level, and other variables. Of the 612 participants who responded, 494 were currently working as a technician and not enrolled in a PharmD program of study. Participants reported various activities in which they were highly engaged. Overall, attitudes toward performing most of the activities and self-efficacies were quite favorable, even for those activities in which technicians were currently less involved. There were some notable differences between technicians practicing in community versus hospital settings. Years of experience, profession commitment, and advanced employee ranking were associated with higher levels of self-efficacy, overall. This initial examination of pharmacy technician self-efficacies identified areas that along with other factors could help employers with further expanding technician practice activities and vocational institutions with considerations for education and development of these key members
Irwin, Adriane N; Heilmann, Rachel M F; Gerrity, Theresa M; Kroner, Beverly A; Olson, Kari L
2014-12-01
The ability of a pharmacy technician to support the patient screening and documentation-related functions of a pharmacist-driven osteoporosis management service was evaluated. A two-phase prospective study was conducted within a large integrated health system to assess a pharmacy technician's performance in supporting a multisite team of clinical pharmacy specialists providing postfracture care. In phase I of the study, a specially trained pharmacy technician provided support to pharmacists at five participating medical offices, helping to identify patients requiring pharmacist intervention and, when applicable, collecting patient-specific clinical information from the electronic health record. In phase II of the study, the amount of pharmacist time saved through the use of technician support versus usual care was evaluated. The records of 127 patient cases were reviewed by the pharmacy technician during phase I of the study, and a pharmacist agreed with the technician's determination of the need for intervention in the majority of instances (92.9%). An additional 91 patient cases were reviewed by the technician in phase II of the research. With technician support, pharmacists spent less time reviewing cases subsequently determined as not requiring intervention (mean ± S.D., 5.0 ± 3.8 minutes per case compared with 5.2 ± 4.5 minutes under the usual care model; p = 0.78). In cases requiring intervention, technician support was associated with a reduction in the average pharmacist time spent on care plan development (13.5 ± 7.1 minutes versus 18.2 ± 16.6 minutes with usual care, p = 0.34). The study results suggest that a pharmacy technician can accurately determine if a patient is a candidate for pharmacist intervention and collect clinical information to facilitate care plan development. Copyright © 2014 by the American Society of Health-System Pharmacists, Inc. All rights reserved.
Enabling Professionalism: The Master Technician Program.
ERIC Educational Resources Information Center
Wimmer, Doris K.
1988-01-01
Describes Virginia's Master Technician Program, which offers a comprehensive coordinated curriculum in electronics/electromechanical technology that spans high school and community college levels of instruction. Highlights innovations of the project, curriculum design, advantages, and future projections. (DMM)
Patient- and Technician-Oriented Attitudes Toward Transcranial Magnetic Stimulation Devices.
Lonergan, Brady; Nguyen, Eliza; Lembo, Cara; Hinchman, Carrie; Morales, Oscar G; Press, Daniel Z; Pascual-Leone, Alvaro; Stern, Adam P
2018-01-25
Four transcranial magnetic stimulation (TMS) devices are currently approved for use in treatment-resistant depression. The authors present the first data-driven study examining the patient- and technician-experience using three of these distinct devices. A retrospective survey design with both patient and technician arms was utilized. The study population included patients who received TMS for treatment-resistant depression at the Berenson Allen Center for Noninvasive Brain Stimulation for the first time between 2013 and 2016 and technicians who worked in the program from 2009 to 2017. Statistical analysis included t tests and analyses of variance to assess differences between and across the multiple groups, respectively. Patients treated with the NeuroStar device reported greater confidence that the treatment was being performed correctly compared with those treated with the Magstim device. Conversely, with regard to tolerability, patients treated with the Magstim device reported less pain in the last week and less pain on average compared with those treated with the NeuroStar device. On average, technicians reported feeling that both the Magstim and NeuroStar devices were significantly easier to use than the Brainsway Deep TMS H-Coil device. Additionally, they found the former two devices to be more reliable and better tolerated. Furthermore, the technicians reported greater confidence in the Magstim and NeuroStar devices compared with the Brainsway Deep TMS H-Coil device and indicated that they would be more likely to recommend the two former devices to other treatment centers.
Pharmacy technician-to-pharmacist ratios: a state-driven safety and quality decision.
Bess, D Todd; Carter, Jason; DeLoach, Lindsey; White, Carol L
2014-01-01
To discuss the policy of pharmacy technician-to-pharmacist ratios by comparing Florida as an example of legislative-led authority versus Tennessee as an example of board of pharmacy-led ruling. Over the past 2 years, the Florida legislature has debated the issue of pharmacy staffing ratios, initially leaving the Florida Board of Pharmacy with little authority to advocate for and enact safe technician staffing ratios. Anticipating this situation, the Tennessee Board of Pharmacy created rules to meet pharmacy staffing needs while protecting the authority of the pharmacist-in-charge and promoting patient safety. Before enacting rules, members of the board toured the state and talked about proposed rule changes with pharmacists. The final rule sets the pharmacy technician-to-pharmacist ratio at 2:1 but permits a 4:1 ratio based on public safety considerations and availability of at least two Certified Pharmacy Technicians. Pharmacists and leaders within the profession should conduct further research on appropriate and safe ratios of pharmacy technicians to pharmacists, with a focus on safety and quality of care.
Desselle, Shane P; Vaughan, Melissa; Faria, Thomas
2002-01-01
To design a highly quantitative template for the evaluation of community pharmacy technicians' job performance that enables managers to provide sufficient feedback and fairly allocate organizational rewards. Two rounds of interviews with two convenience samples of community pharmacists and pharmacy technicians were conducted. The interview in phase 1 was qualitative, and responses were used to design the second interview protocol. During the phase 2 interviews, a new group of respondents ranked technicians' job responsibilities, identified through the initial interviewees' responses, using scales the researchers had designed using an interval-level scaling technique called equal-appearing intervals. Chain and independent pharmacies. Phase 1-20 pharmacists and 20 technicians from chain and independent pharmacies; phase 2-20 pharmacists and 9 technicians from chain and independent pharmacies. Ratings of the importance of technician practice functions and corresponding responsibilities. Weights were calculated for each practice function. A weighted list of practice functions was developed, and this may serve as a performance evaluation template. Customer service-related activities were judged by pharmacists and technicians alike to be the most important technician functions. Many pharmacies either lack formal performance appraisal systems or fail to implement them properly. Technicians may desire more consistent feedback from pharmacists and value information that may lead to organizational rewards. Using a weighted, behaviorally anchored performance appraisal system may help pharmacists and pharmacy managers meet these demands.
KSC technicians on team to modify X-34
NASA Technical Reports Server (NTRS)
1999-01-01
Two of KSC's X-34 technicians (far right), David Rowell and Roger Cartier, look at work being done on the modified A-1A at Dryden Flight Research Center, Calif. Since September, eight NASA engineering technicians from KSC's Engineering Prototype Lab have assisted Orbital Sciences Corporation and NASA's Dryden Flight Research Center in the complex process of converting the X-34 A-1 vehicle from captive carry status to unpowered flight status, the A-1A. The other KSC technicians are Kevin Boughner, Mike Dininny, Mike Lane, Jerry Moscoso, James Niehoff Jr. and Bryan Taylor. The X-34 is 58.3 feet long, 27.7 feet wide from wing tip to wing tip, and 11.5 feet tall from the bottom of the fuselage to the top of the tail. The autonomously operated technology demonstrator will be air-launched from an L-1011 airplane and should be capable of flying eight times the speed of sound, reaching an altitude of 250,000 feet. The X-34 Project is managed by NASA's Marshall Space Flight Center in Huntsville, Ala.
KSC technicians on team to modify X-34
NASA Technical Reports Server (NTRS)
1999-01-01
At Dryden Flight Research Center, Calif., KSC technician Bryan Taylor makes an adjustment on the modified X-34, known as A-1A. Taylor is one of eight NASA engineering technicians from KSC's Engineering Prototype Lab who have assisted Orbital Sciences Corporation and Dryden in the complex process of converting the X-34 A-1 vehicle from captive carry status to unpowered flight status, the A-1A. The other KSC technicians are Kevin Boughner, Roger Cartier, Mike Dininny, Mike Lane, Jerry Moscoso, James Niehoff Jr. and David Rowell. The X-34 is 58.3 feet long, 27.7 feet wide from wing tip to wing tip, and 11.5 feet tall from the bottom of the fuselage to the top of the tail. The autonomously operated technology demonstrator will be air-launched from an L- 1011 airplane and should be capable of flying eight times the speed of sound, reaching an altitude of 250,000 feet. The X-34 Project is managed by NASA's Marshall Space Flight Center in Huntsville, Ala.
KSC technicians on team to modify X-34
NASA Technical Reports Server (NTRS)
1999-01-01
At Dryden Flight Research Center, Calif., KSC technician James Niehoff Jr. (left) helps attach the wing of the modified X-34, known as A-1A. Niehoff is one of eight NASA engineering technicians from KSC's Engineering Prototype Lab who have assisted Orbital Sciences Corporation and Dryden in the complex process of converting the X-34 A-1 vehicle from captive carry status to unpowered flight status, the A-1A. The other KSC technicians are Kevin Boughner, Roger Cartier, Mike Dininny, Mike Lane, Jerry Moscoso, David Rowell and Bryan Taylor. The X-34 is 58.3 feet long, 27.7 feet wide from wing tip to wing tip, and 11.5 feet tall from the bottom of the fuselage to the top of the tail. The autonomously operated technology demonstrator will be air-launched from an L-1011 airplane and should be capable of flying eight times the speed of sound, reaching an altitude of 250,000 feet. The X-34 Project is managed by NASA's Marshall Space Flight Center in Huntsville, Ala.
Technician Education Yearbook 1973-1974.
ERIC Educational Resources Information Center
Prakken, Lawrence D., Ed.
In this sixth (1973-74) edition of the Technician Education Yearbook, the current status in the development of community/junior colleges and technical institutes is presented on the basis of information gathered from replies to more than 3,000 questionnaires. Nine articles relating to new issues, problems, and proposals are compiled in the first…
Histologic Technician. Laboratory Occupations Cluster.
ERIC Educational Resources Information Center
Michigan State Univ., East Lansing. Coll. of Agriculture and Natural Resources Education Inst.
This task-based curriculum guide for histologic technician is intended to help the teacher develop a classroom management system where students learn by doing. Introductory materials include a Dictionary of Occupational Titles job code and title sheet, a career ladder, a matrix relating duty/task numbers to job titles, and a task list. Each task…
Instructor Quality Affecting Emergency Medical Technician (EMT) Preparedness: A LEADS Project
ERIC Educational Resources Information Center
Russ-Eft, Darlene F.; Dickison, Philip D.; Levine, Roger
2005-01-01
This represents one of a series of studies of the Longitudinal Emergency Medical Technician Attributes and Demographics Study (LEADS) being undertaken by the National Registry of Emergency Medical Technicians and the National Highway Traffic Safety Administration (NHTSA). This secondary analysis of the LEADS database, which provides a…
de Bucourt, Maximilian; Busse, Reinhard; Güttler, Felix; Wintzer, Christian; Collettini, Federico; Kloeters, Christian; Hamm, Bernd; Teichgräber, Ulf K
2011-08-01
OBJECTIVES: To apply the economic terminology of lean manufacturing and the Toyota Production System to the procurement of vascular stents in interventional radiology. METHODS: The economic- and process-driven terminology of lean manufacturing and the Toyota Production System is first presented, including information and product flow as well as value stream mapping (VSM), and then applied to an interdisciplinary setting of physicians, nurses and technicians from different medical departments to identify wastes in the process of endovascular stent procurement in interventional radiology. RESULTS: Using the so-called seven wastes approach of the Toyota Production System (waste of overproducing, waiting, transport, processing, inventory, motion and waste of defects and spoilage) as well as further waste characteristics (gross waste, process and method waste, and micro waste), wastes in the process of endovascular stent procurement in interventional radiology were identified and eliminated to create an overall smoother process from the procurement as well as from the medical perspective. CONCLUSION: Economic terminology of lean manufacturing and the Toyota Production System, especially VSM, can be used to visualise and better understand processes in the procurement of vascular stents in interventional radiology from an economic point of view.
A survey of needle handling practices and needlestick injuries in veterinary technicians.
Weese, J Scott; Faires, Meredith
2009-12-01
A survey of veterinary technicians identified that needlestick injuries are very common, with 210/226 (93%) technicians reporting at least one needlestick injury over the course of their career. One hundred sixty-seven (74%) had experienced a needlestick injury during the preceding year. Exposure to animal blood and various drugs was common. It was particularly concerning that needlestick injuries involving chemotherapeutic agents and prostaglandin were reported. Eight (3.5%) technicians had required medical care for a needlestick injury and 2 (0.8%) had lost time at work. The approach to sharps handling and needlestick injury avoidance was poor and most needlestick injuries had not been reported to employers. Measures need to be undertaken to improve sharps handling practices to reduce the number of needlestick injuries among veterinary technicians.
5 CFR 831.306 - Service as a National Guard technician before January 1, 1969.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Service as a National Guard technician... National Guard technician before January 1, 1969. (a) Definitions. In this section—(1) Service as a National Guard technician is service performed under section 709 of title 32, United States Code (or under...
Digitizing the Facebow: A Clinician/Technician Communication Tool.
Kalman, Les; Chrapka, Julia; Joseph, Yasmin
2016-01-01
Communication between the clinician and the technician has been an ongoing problem in dentistry. To improve the issue, a dental software application has been developed--the Virtual Facebow App. It is an alternative to the traditional analog facebow, used to orient the maxillary cast in mounting. Comparison data of the two methods indicated that the digitized virtual facebow provided increased efficiency in mounting, increased accuracy in occlusion, and lower cost. Occlusal accuracy, lab time, and total time were statistically significant (P<.05). The virtual facebow provides a novel alternative for cast mounting and another tool for clinician-technician communication.
Analysis of Associate Degree Program for Traffic Safety Technicians. Final Report.
ERIC Educational Resources Information Center
Shimada, Jonathan K.
A study was conducted to evaluate the impact of the Associate Degree Program for Traffic Engineering Technicians (TET's) offered at three community colleges on students' subsequent job performance as technicians. Data were collected by means of personal interviews and telephone interviews with 81 students, their primary instructors, and their…
Lead and methylene chloride exposures among automotive repair technicians.
Enander, Richard T; Cohen, Howard J; Gute, David M; Brown, Linfield C; Desmaris, Anne Marie C; Missaghian, Richard
2004-02-01
Potential exposures among repair technicians engaged in vehicle resurfacing operations prior to spray painting have not been thoroughly characterized. Environmental and personal air monitoring conducted in the State of Rhode Island have shown that automotive repair technicians may be exposed to metal particulates in sanding dust and methylene chloride vapors during vehicle paint removal operations. Hand wipe samples demonstrated that metals in sanding dust adhered to the hands of workers throughout the duration of the work day and were available for incidental ingestion from the handling of food/nonfood items and hand-to-mouth contact. A blood lead (PbB) screening effort among 21 workers at 2 facilities showed that 4 non-/less-exposed workers had mean PbB levels at the U.S. geometric mean of 2.8 microg/dL, while 2 out of 9 (22%) dedicated vehicle repair technicians had PbB levels at or above 30 microg Pb/dL whole blood--the level for potential adverse reproductive effects. Methylene chloride exposures were also found to exceed the Occupational Safety and Health Administrations (OSHA) 8-hr time-weighted average (TWA) action level and permissible exposure limit (PEL) in a limited number of samples (120 and 26 ppm, integrated work shift samples). Our findings suggest that thousands of professional technicians and vocational high school students may be at increased risk of adverse reproductive and/or other systemic effects.
Nuclear Technology Series. Course 18: Radiological Emergencies.
ERIC Educational Resources Information Center
Center for Occupational Research and Development, Inc., Waco, TX.
This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…
The Effects of Workload and Working Conditions on Operating Room Nurses and Technicians.
Uğurlu, Ziyafet; Karahan, Azize; Ünlü, Hayriye; Abbasoğlu, Aysel; Özhan Elbaş, Nalan; Avcı Işık, Sevcan; Tepe, Aylin
2015-09-01
This study was conducted between August 15 and September 20, 2013, to determine the effects of workload and working conditions on operating room (OR) nurses and technicians. The study sample included 74 OR nurses and technicians working in a private university's six hospitals. The Individual Workload Perception Scale and a questionnaire that collected data on risk and environmental factors were used. The mean age of study participants was 29.3 ± 6.7 years, and 62.2% of the participants were female. More than 90% of the nurses and technicians had experienced spills or splashing of blood or other body fluids; anesthetic gases and radiation had affected 63.5% and 71.6% of nurses and technicians, respectively; 63.5% reported lumbar pain; and 46.6% defined the work environment as very stressful. The average workload scale score was 32.4 ± 6.2 (min = 11, max = 55). OR nurses and technicians are exposed to many occupational risks. © 2015 The Author(s).
Aerospace Technicians: We're Tomorrow-Minded People
NASA Technical Reports Server (NTRS)
Lewis, M. H.
1981-01-01
Brief job-related autobiographical sketches of technicians working on NASA aerospace projects are presented. Career and educational guidance is offered to students thinking about entering the field of aerospace technology.
Loos, G; Moreau, J; Miroir, J; Benhaïm, C; Biau, J; Caillé, C; Bellière, A; Lapeyre, M
2013-10-01
The various image-guided radiotherapy techniques raise the question of how to achieve the control of patient positioning before irradiation session and sharing of tasks between radiation oncologists and radiotherapy technicians. We have put in place procedures and operating methods to make a partial delegation of tasks to radiotherapy technicians and secure the process in three situations: control by orthogonal kV imaging (kV-kV) of bony landmarks, control by kV-kV imaging of intraprostatic fiducial goldmarkers and control by cone beam CT (CBCT) imaging for prostate cancer. Significant medical overtime is required to control these three IGRT techniques. Because of their competence in imaging, these daily controls can be delegated to radiotherapy technicians. However, to secure the process, initial training and regular evaluation are essential. The analysis of the comparison of the use of kV/kV on bone structures allowed us to achieve a partial delegation of control to radiotherapy technicians. Controlling the positioning of the prostate through the use and automatic registration of fiducial goldmarkers allows better tracking of the prostate and can be easily delegated to radiotherapy technicians. The analysis of the use of daily cone beam CT for patients treated with intensity modulated irradiation is underway, and a comparison of practices between radiotherapy technicians and radiation oncologists is ongoing to know if a partial delegation of this control is possible. Copyright © 2013. Published by Elsevier SAS.
ERIC Educational Resources Information Center
Lewis, Paul A.; Gospel, Howard
2015-01-01
The UK government aims to increase both the number, and also the status, of workers with intermediate-level skills, with a view to creating a "modern class of technicians" who can help to bolster economic growth and prosperity. This article considers the prospects for such a policy by focusing on one particular, but neglected, group of…
Rand, Gabriel M; Kwon, Ji Won; Gore, Patrick K; McCartney, Mitchell D; Chuck, Roy S
2017-10-01
To quantify consistency of endothelial cell density (ECD) measurements among technicians in a single US eye bank operating under typical operating conditions. In this retrospective analysis of 51 microscopy technicians using a semiautomated counting method on 35,067 eyes from July 2007 to May 2015, technician- and date-related marginal ECD effects were calculated using linear regression models. ECD variance was correlated with the number of specular microscopy technicians. Technician mean ECDs ranged from 2386 ± 431 to 3005 ± 560 cells/mm. Nine technicians had statistically and clinically significant marginal effects. Annual mean ECDs adjusted for changes in technicians ranged from 2422 ± 433 to 2644 ± 430 cells/mm. The period of 2007 to 2009 had statistically and clinically significant marginal effects. There was a nonstatistically significant association between the number of technicians and ECD standard deviation. There was significant ECD variability associated with specular microscopy technicians and with the date of measurement. We recommend that eye banks collect data related to laboratory factors that have been shown to influence ECD variability.
Pharmacist and Technician Perceptions of Tech-Check-Tech in Community Pharmacy Practice Settings.
Frost, Timothy P; Adams, Alex J
2018-04-01
Tech-check-tech (TCT) is a practice model in which pharmacy technicians with advanced training can perform final verification of prescriptions that have been previously reviewed for appropriateness by a pharmacist. Few states have adopted TCT in part because of the common view that this model is controversial among members of the profession. This article aims to summarize the existing research on pharmacist and technician perceptions of community pharmacy-based TCT. A literature review was conducted using MEDLINE (January 1990 to August 2016) and Google Scholar (January 1990 to August 2016) using the terms "tech* and check," "tech-check-tech," "checking technician," and "accuracy checking tech*." Of the 7 studies identified we found general agreement among both pharmacists and technicians that TCT in community pharmacy settings can be safely performed. This agreement persisted in studies of theoretical TCT models and in studies assessing participants in actual community-based TCT models. Pharmacists who had previously worked with a checking technician were generally more favorable toward TCT. Both pharmacists and technicians in community pharmacy settings generally perceived TCT to be safe, in both theoretical surveys and in surveys following actual TCT demonstration projects. These perceptions of safety align well with the actual outcomes achieved from community pharmacy TCT studies.
Development and validation of a questionnaire to evaluate infection control in oral radiology.
da Costa, Eliana D; Pinelli, Camila; da Silva Tagliaferro, Elaine P; Corrente, José E; Ambrosano, Glaucia M B
2017-04-01
To create and validate a questionnaire to evaluate infection control in oral radiology. The questionnaire was developed after review of the literature, which included published articles and the biosafety protocols available from healthcare agencies. The initial version of the questionnaire was composed of 14 multiple choice questions and was divided into 3 domains on handwashing, disinfection/protection of surfaces and disinfectant used. Content validity was assessed by two expert committees, which reviewed the content and scope of the questionnaire and the relevance of each item, respectively. Reliability was evaluated using test-retest and internal consistency methods with 115 undergraduate dentistry students. Construct validity was assessed using the known-groups technique and factor analysis. The known-groups technique involved 641 undergraduate dentistry students, 20 PhD students and 15 oral radiology professors. In the factor analysis, 3 radiology technicians also participated in addition to the 641 undergraduates, 20 PhD students and 15 oral radiology professors. The content validity results were found to be satisfactory to excellent for the ordinal variables (intraclass correlation coefficient = 0.722-1.000) and good to great for the yes/no questions (kappa = 0.662-0.913) in terms of reliability and good internal consistency (Cronbach's alpha = 0.88). After a factor analysis, some questions were excluded, and the questions were grouped into new domains. Significant differences were observed between answers from different groups. The final version of the questionnaire was composed of nine domains. The questionnaire created was found to exhibit good psychometric properties for assessing infection control in oral radiology.
KSC technicians on team to modify X-34
NASA Technical Reports Server (NTRS)
1999-01-01
KSC technician David Rowell works on the wing of the modified X- 34, known as A-1A, at the Dryden Flight Research Center, Calif. Looking on are Art Cape, with Dryden, and Mike Brainard, with Orbital Sciences Corporation. Rowell is one of eight NASA engineering technicians from KSC's Engineering Prototype Lab who have assisted Orbital and Dryden in the complex process of converting the X-34 A-1 vehicle from captive carry status to unpowered flight status, the A-1A. The other KSC technicians are Kevin Boughner, Roger Cartier, Mike Dininny, Mike Lane, Jerry Moscoso, James Niehoff Jr. and Bryan Taylor. The X-34 is 58.3 feet long, 27.7 feet wide from wing tip to wing tip, and 11.5 feet tall from the bottom of the fuselage to the top of the tail. The autonomously operated technology demonstrator will be air- launched from an L-1011 airplane and should be capable of flying eight times the speed of sound, reaching an altitude of 250,000 feet. The X-34 Project is managed by NASA's Marshall Space Flight Center in Huntsville, Ala.
Frost, Timothy P; Adams, Alex J
2017-11-01
As the role of the clinical pharmacist continues to develop and advance, it is critical to ensure pharmacists can operate in a practice environment and workflow that supports the full deployment of their clinical skills. When pharmacy technician roles are optimized, patient safety can be enhanced and pharmacists may dedicate more time to advanced clinical services. Currently, 17 states allow technicians to accept verbal prescriptions called in by a prescriber or prescriber's agent, or transfer a prescription order from one pharmacy to another. States that allow these activities generally put few legal limitations on them, and instead defer to the professional judgment of the supervising pharmacist whether to delegate these tasks or not. These activities were more likely to be seen in states that require technicians to be registered and certified, and in states that have accountability mechanisms (e.g., discipline authority) in place for technicians. There is little evidence to suggest these tasks cannot be performed safely and accurately by appropriately trained technicians, and the track record of success with these tasks spans four decades in some states. Pharmacists can adopt strong practice policies and procedures to mitigate the risk of harm from verbal orders, such as instituting read-back/spell-back techniques, or requiring the indication for each phoned-in medication, among other strategies. Pharmacists may also exercise discretion in deciding to whom to delegate these tasks. As the legal environment becomes more permissive, we foresee investment in more robust education and training of technicians to cover these activities. Thus, with the adoption of robust practice policies and procedures, delegation of verbal orders and prescription transfers can be safe and effective, remove undue stress on pharmacists, and potentially free up pharmacist time for higher-order clinical care. Copyright © 2016 Elsevier Inc. All rights reserved.
Raising the Bar or Training Library Technicians To Assume Reference Responsibilities.
ERIC Educational Resources Information Center
Brandys, Barbara; Daghita, Joan; Whitmore, Susan
This paper reports on a program at the National Institutes of Health (NIH) Library that was instituted to train library technicians to work at the Information Desk as Reference Assistants; the objectives of the program were to train library technicians to become reference assistants, to free up librarians' time for new work assignments, and to…
Technicians prepare to close hatches on Gemini 11 spacecraft during countdown
NASA Technical Reports Server (NTRS)
1966-01-01
Technicians in the White Room atop Pad 19 prepare to close hatches on the Gemini 11 spacecraft during prelaunch countdown. Inside the spacecraft are Astronauts Charles Conrad Jr., command pilot, and Richard F. Gordon Jr., pilot. There is a humorous sign stating 'This is ABSOLUTELY your Last Chance' being held by one of the technicians.
2003-09-24
KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, technicians on the floor watch as a tray is extended from inside the Pressurized Module, or PM, part of the Japanese Experiment Module (JEM). The PM provides a shirt-sleeve environment in which astronauts on the International Space Station can conduct microgravity experiments. There are a total of 23 racks, including 10 experiment racks, inside the PM providing a power supply, communications, air conditioning, hardware cooling, water control and experiment support functions.
Technician Training in Environmental Health Science
ERIC Educational Resources Information Center
Smith, Robert G.; Sherman, Alan
1976-01-01
The Environmental Health Science Technology Program was initiated by Middlesex County College in 1971 to provide the trained personnel needed by industry and government. Major areas needing environmental health technicians, the environmental health technology curriculum, and the on-the-job-training internship program are discussed. (BT)
Apprenticeship Training: Auto Body Technician Program.
ERIC Educational Resources Information Center
Alberta Learning, Edmonton. Apprenticeship and Industry Training.
This document presents information about the apprenticeship training program of Alberta, Canada, in general and the auto body technician program in particular. The first part of the document discusses the following items: Alberta's apprenticeship and industry training system; the apprenticeship and industry training committee structure; local…
Medical Laboratory Technician--Microbiology (AFSC 90470).
ERIC Educational Resources Information Center
Thompson, Joselyn H.
This four-volume student text is designed for use by Air Force personnel enrolled in a self-study extension course for medical laboratory technicians. Covered in the individual volumes are laboratory procedures in clinical bacteriology (the history of bacteriology; aseptic techniques and sterilization procedures; bacterial morphology and…
Summary of the National Technicians' Conference ASE/NSLC York--5/6th July 2012
ERIC Educational Resources Information Center
Bostock, Julia, Comp.
2012-01-01
This article presents a summary of the National Technicians' Conference ASE/NSLC York from July 5th to July 6th 2012. Approximately 160 technicians attended the Conference on both days. The programme included workshops and lectures and was repeated on the Friday, so that technicians who stayed for both days were able to take part in a variety of…
Technicians assembly the Hubble Space Telescope (HST) mockup at JSC
NASA Technical Reports Server (NTRS)
1989-01-01
At JSC's Mockup and Integration Laboratory (MAIL) Bldg 9A, technicians install a high gain antenna (HGA) on the Hubble Space Telescope (HST) mockup. On the ground a technician operates the controls for the overhead crane that is lifting the HGA into place on the Support System Module (SSM) forward shell. Others in a cherry picker basket wait for the HGA to near its final position so they can secure it on the mockup.
EDUCATION FOR HEALTH TECHNICIANS--AN OVERVIEW.
ERIC Educational Resources Information Center
KINSINGER, ROBERT E.
AS DEFINED, HEALTH SERVICE TECHNICIANS ARE NORMALLY PREPARED FOR ENTRY INTO THEIR OCCUPATIONS BY PURSUING A POST-SECONDARY EDUCATIONAL PROGRAM THAT DOES NOT DEMAND A BACCALAUREATE DEGREE BUT USUALLY INCLUDES A COMBINATION OF THEORY, PRACTICAL KNOWLEDGE, MANUAL SKILL, AND WHEN APPROPRIATE, ACTUAL CLINICAL PRACTICE. EXAMPLES OF SUCH TECHNICIANS…
Clinical support role for a pharmacy technician within a primary care resource center.
Fera, Toni; Kanel, Keith T; Bolinger, Meghan L; Fink, Amber E; Iheasirim, Serah
2018-02-01
The creation of a clinical support role for a pharmacy technician within a primary care resource center is described. In the Primary Care Resource Center (PCRC) Project, hospital-based care transition coordination hubs staffed by nurses and pharmacist teams were created in 6 independent community hospitals. At the largest site, patient volume for targeted diseases challenged the ability of the PCRC pharmacist to provide expected elements of care to targeted patients. Creation of a new pharmacy technician clinical support role was implemented as a cost-effective option to increase the pharmacist's efficiency. The pharmacist's work processes were reviewed and technical functions identified that could be assigned to a specially trained pharmacy technician under the direction of the PCRC pharmacist. Daily tasks performed by the pharmacy technician included maintenance of the patient roster and pending discharges, retrieval and documentation of pertinent laboratory and diagnostic test information from the patient's medical record, assembly of patient medication education materials, and identification of discrepancies between disparate systems' medication records. In the 6 months after establishing the PCRC pharmacy technician role, the pharmacist's completion of comprehensive medication reviews (CMRs) for target patients increased by 40.5% ( p = 0.0223), driven largely by a 42.4% ( p < 0.0001) decrease in the time to complete each chart review. The addition of a pharmacy technician to augment pharmacist care in a PCRC team extended the reach of the pharmacist and allowed more time for the pharmacist to engage patients. Technician support enabled the pharmacist to complete more CMRs and reduced the time required for chart reviews. Copyright © 2018 by the American Society of Health-System Pharmacists, Inc. All rights reserved.
Training needs analysis for engineering technicians in Oman
NASA Astrophysics Data System (ADS)
Al-Mughairi, Abdulkarim Sultan
This thesis examines the transition from the Omani Colleges of Technology (CT) to employment of its engineering graduates. It arises out of concerns that the transition to the labour market for engineering graduate is problematical. The research was carried out to identify the knowledge, skills, and abilities (KSA) of engineering technicians required in the Omani market place. The aim is to provide local curriculum designers in the Colleges of Technology with sufficient information about the required KSA in order to create and enhance the engineering curriculum so that it has greater capacity to meet the needs of a variety of stakeholders and of employers in particular. This in turn has the potential to bridge the gap between what is presently taught and what the workplace demands. Personnel psychologists identify views concerning the skills that are required for different jobs. One of these is based on the assumption that quite different skills are required in different jobs (SCANS, 1990). This view generates approaches within job analysis: the worker-oriented and the task-oriented approaches. This research uses Position Analysis Questionnaire (PAQ), which is a worker-oriented job analysis instrument, to investigate the KSA required to perform some of the engineering technician jobs in Omani industries. In addition, semi-structured interviews were used to investigate the factors that either hinder or entirely prevent the new graduates from Colleges of Technology from being accepted in the workforce pool. The major research findings concern the dimensions of knowledge, skills, and abilities of six engineering technician job titles and the major factors that hinder or (prevent) the technical college graduates from being accepted in the market place in Oman. These findings would definitely help design better transition route and bridge the gap between the CT technicians engineering programmes and the workplace demands.
Implementing Computer Integrated Manufacturing Technician Program.
ERIC Educational Resources Information Center
Gibbons, Roger
A computer-integrated manufacturing (CIM) technician program was developed to provide training and technical assistance to meet the needs of business and industry in the face of the demands of high technology. The Computer and Automated Systems Association (CASA) of the Society of Manufacturing Engineers provided the incentive and guidelines…
Unified Technical Concepts. Physics for Technicians.
ERIC Educational Resources Information Center
Center for Occupational Research and Development, Inc., Waco, TX.
Unified Technical Concepts (UTC) is a modular system for teaching applied physics in two-year postsecondary programs. This UTC classroom textbook, consisting of 14 chapters, deals with physics for technicians. Addressed in the individual chapters of the guide are the following topics: force, work, rate, momentum, resistance, power, potential and…
A PROGRAM FOR ARCHITECTURAL TECHNICIAN'S TRAINING.
ERIC Educational Resources Information Center
TERNSTROM, CLINTON C.; AND OTHERS
ARCHITECTURAL TECHNICIANS TRANSLATE DESIGN AND SYSTEMS SOLUTIONS INTO GRAPHIC AND WRITTEN FORM AND ASSIST IN RENDERING ARCHITECTURAL SERVICES. IN 1966, A STUDY GROUP FROM THE AMERICAN INSTITUTE OF ARCHITECTS FOUND THAT EXISTING 2-YEAR PROGRAMS WERE INADEQUATE, FALLING INTO ONE OF TWO CATEGORIES--(1) DRAFTING COURSES WHICH LACKED BREADTH AND FAILED…
Survey on the use of CAD-CAM technology by UK and Irish dental technicians.
Blackwell, E; Nesbit, M; Petridis, H
2017-05-12
Statement of the problem Digital workflows (CAD/CAM) have been introduced in dentistry during recent years. No published information exists on dental technicians' use and reporting of this technology.Purpose The aim of this cross sectional survey was to identify the extent digital technology has infiltrated the workplace and to investigate the factors affecting the use of CAD-CAM technology by dental laboratory technicians within Ireland and the UK.Materials and methods A web-based questionnaire was composed (Opinio, Object Planet Inc. Oslo, Norway) and distributed to UK and Irish dental technicians. Answers to all questions were anonymous and grouped such that general information was gathered initially, followed by branching of the survey into two sections depending on whether or not the respondent worked with CAD-CAM technology. Results were compiled and statistical analysis (Fisher's Exact test, SPSS, IBM, Armonk, New York, USA) was performed in order to investigate any correlation between various demographic variables and the answers provided.Results The survey was distributed to 760 UK technicians and 77 Irish technicians. The total number of completed surveys was 105, which yielded a total response rate of 14%. Most technicians reported using some form of CAD/CAM aspect in the workflow, and this was more significant for technicians working in large laboratories. Most training received was company-led. Large laboratories were also significantly correlated with less outsourcing of CAD/CAM work and a change in dental material use leading to the increase of zirconia and the decrease of noble alloys. Dental technicians did not report any significant change in working relationships and staffing as a result of CAD/CAM incorporation. High initial investment cost was the most common reason quoted from non-users, along with the lack of such technology in their working environment.
Hurtado, Johanna; Clark, David B
2011-12-01
Most field ecology is conceived and financed by scientists from urban areas but is actually carried out in rural areas. Field staff can either be imported from urban areas or recruited from local residents. We evaluated the advantages and disadvantages of involving rural residents as local technicians over a 25- year period at active field research site in Costa Rica. We defined "local technicians" as local residents with no university education who acquired significant experience in field data collection, data management and/or laboratory work. We analyzed the experiences of incorporating these technicians into field research in developing countries from the points of view of scientist and of the local technicians themselves. Primary data were written responses from to a standardized survey of 19 senior scientists and Ph.D. students,and results from standardized personal interviews with 22 local technicians. Researchers highlighted the advantages of highly-skilled technicians with minimal staff turnover, as well as the technicians' knowledge of local ecological conditions. Local technicians considered the primary advantages of their jobs to be opportunities for continuing education training in science as well as cultural enrichment through interactions with people of different cultures. The main challenges identified by researchers were the lack of long-term funding for projects and extended training required for local technicians. Local technicians can be of great benefit to research projects by providing high-quality data collection at reasonable costs with low staff turnover. Over the last 25 years the research model at the field station we studied has evolved to the point that most long-term projects now depend heavily on local technicians. This model of involving local technicians in long-term research has multiple benefits for the researchers, the technicians and the local community, and could be adapted to a variety of settings in rural areas of developing
Handling Japanese without a Japanese Operating System.
ERIC Educational Resources Information Center
Hatasa, Kazumi; And Others
1992-01-01
The Macintosh HyperCard environment has become a popular platform for Japanese language courseware because of its flexibility and ease of programing. This project created Japanese bitmap font files for the JIS Levels 1 and 2, and writing XFCNs for font manipulation, Japanese kana input, and answer correction. (12 references) (Author/LB)
Desselle, Shane P
2016-01-01
Pharmacy technicians are a vital part of the health care workforce. Little is known about perceptions of their own work environment that would engender more effective recruitment, retention, and management strategies by pharmacists and employers. The purpose of this study was to gain a greater understanding of certified pharmacy technician worklife. Specific objectives included the identification of themes of worklife phenomena to assist with the development of appropriate responses by other pharmacy stakeholders and to ascertain the contribution of various factors engendering or discouraging career commitment of pharmacy technicians. Semi-structured in-depth interviews were carried out with a convenience sample of pharmacy technicians in one U.S. state, who varied by their work settings and level of experience. The interview guide and corresponding participant responses were framed from around an organizational cultural basis rooted in organizational behavior theory. Notes from the interviews were analyzed thematically using directed content analysis. Four primary themes emerged, including: career impetus, job responsibilities, quality of work life, and equitable partnership. The data revealed pharmacy technicians' need for self-actualization and recognition of the value they bring to the organization. The participants identified primary responsibilities that contribute to their sense of worth and those that if not managed adequately potentially detract from their well-being and effectiveness. Findings in regard to rate of pay corroborate previous work on wages as both an intrinsic and extrinsic motivator. Pharmacy technicians seek equity among each other (their peers) and in a mutually beneficial relationship with their employing organization. This study provides the impetus for interventions and further study that should serve to enhance pharmacy technician effectiveness, quality of work life, and longevity in an emerging profession. Copyright © 2015 Elsevier
Basic Emergency Medical Technician Skills Manual.
ERIC Educational Resources Information Center
Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.
This manual was developed to help students preparing to become emergency medical technicians (EMTs) learn standardized basic skills in the field. The manual itemizes the steps and performance criteria of each required skill and uses an accompanying videotape series (not included) to enhance the educational experience. The five units of the manual,…
Unified Technical Concepts. Math for Technicians.
ERIC Educational Resources Information Center
Center for Occupational Research and Development, Inc., Waco, TX.
Unified Technical Concepts (UTC) is a modular system for teaching applied physics in two-year postsecondary technician programs. This UTC classroom textbook, consisting of 10 chapters, deals with mathematical concepts as they apply to the study of physics. Addressed in the individual chapters of the text are the following topics: angles and…
The Relationship of Academic Courses to Skills Required of Automobile Repair Technicians
ERIC Educational Resources Information Center
Freund, Stephen H.
2013-01-01
The primary objective was to show the important need of academic skills, specifically general education coursework, to the effectiveness of the technician's expertise in the field of automobile repair. Additionally, I emphasized that one of the keys to the quality of the technician's education is the method of instruction analyzed through…
A Wider Role for Technicians in Science Practical Work with School Students?
ERIC Educational Resources Information Center
Helliar, Anne T.; Harrison, Timothy G.
2010-01-01
This paper reports the results of a study made on the impact of improved deployment of science technicians in the classroom could directly benefit students in practical science investigations. Science technicians are skilled individuals whose understanding of practical work is a valuable resource not being used of in support of students…
da Cruz, Andrea de Mello Pereira; Almeida, Miriam de Abreu
2010-12-01
This is a qualitative, exploratory and descriptive study whose general objective was to learn, considering the perspective of the nursing technician who works in school hospitals, the competencies developed during their educational process to implement the Nursing Care Systematization (NCS). Data collection and analysis were carried out through a focal group, with content analysis and nursing technicians. Two thematic categories emerged: The participation of the nursing technician in the NCS and The competencies in the education of the nursing technician. Each one received two subcategories: Conception of the NCS and (De)valuation of the NCS, Technical-scientific competency and Competency in the interpersonal relationship, respectively. It was observed that the NCS must be shared, discussed and made public among nursing professionals, so that they may acknowledge themselves as the leading actors of their methodology and be aware that their practices determine the results.
Driesenaar, Jeanine A; De Smet, Peter A G M; van Hulten, Rolf; Horne, Rob; Zwikker, Hanneke; van den Bemt, Bart; van Dulmen, Sandra
2016-12-01
To compare pharmacists' and pharmacy technicians' perceptions of patients' beliefs regarding inhaled corticosteroids (ICS) with those of patients and to compare the ICS beliefs of pharmacists and technicians with those of patients with asthma. 1269 community pharmacies were approached to fill out an online questionnaire; 1952 patients were sent a questionnaire by post. Beliefs (i.e., necessity and concerns) regarding ICS were measured using (an adapted version of) the Beliefs about Medicines Questionnaire (BMQ-specific). Pharmacists and technicians were instructed to fill out the BMQ for themselves, and to fill it out in the way they thought most of their patients would complete it. 136 pharmacists, 90 pharmacy technicians and 161 patients with asthma completed the questionnaire. Pharmacists and technicians thought patients had more concerns about ICS than patients themselves reported (p < 0.0001). They also thought that patients had stronger beliefs in their personal need for ICS than patients reported (p < 0.01). Pharmacists reported lower levels of concerns than patients (p < 0.05) and both providers attributed a higher level of necessity to ICS than patients did (p < 0.0001). Pharmacists and technicians overestimate the personal need for treatment as well as the concerns patients with asthma have regarding ICS. They also have, to some extent, stronger positive beliefs about ICS than patients. If pharmacists and technicians expect that patients share their positive views about ICS, they might be less likely to elicit and address patients' doubts and concerns about ICS, which might be relevant for effective ICS treatment and subsequent patient outcomes.
Section 609 Technician Training and Certification Programs
EPA-approved programs for technicians who service motor vehicle air conditioning (MVAC) systems. Any person who repairs or services a MVAC system for consideration must be certified under section 609 of the Clean Air Act by an EPA-approved program.
In Perspective. Colombo Plan Staff College for Technician Education: First Two Years.
ERIC Educational Resources Information Center
Colombo Plan Staff Coll., Singapore.
This brochure explains the basic structures, content, and methodologies, which have been established by the Colombo Plan Staff College for Technician Training for its activities in its first two years of operation. The role of a variety of technicians is explained, along with their importance in developing countries. The problems of technician…
Boughen, Melanie; Sutton, Jane; Fenn, Tess; Wright, David
2017-07-15
Traditionally, pharmacy technicians have worked alongside pharmacists in community and hospital pharmacy. Changes within pharmacy provide opportunity for role expansion and with no apparent career pathway, there is a need to define the current pharmacy technician role and role in medicines optimisation. To capture the current roles of pharmacy technicians and identify how their future role will contribute to medicines optimisation. Following ethical approval and piloting, an online survey to ascertain pharmacy technicians' views about their roles was undertaken. Recruitment took place in collaboration with the Association of Pharmacy Technicians UK. Data were exported to SPSS, data screened and descriptive statistics produced. Free text responses were analysed and tasks collated into categories reflecting the type of work involved in each task. Responses received were 393 (28%, n = 1380). Results were organised into five groups: i.e., hospital, community, primary care, General Practitioner (GP) practice and other (which included HM Prison Service). Thirty tasks were reported as commonly undertaken in three or more settings and 206 (84.7%, n = 243) pharmacy technicians reported they would like to expand their role. Tasks core to hospital and community pharmacy should be considered for inclusion to initial education standards to reflect current practice. Post qualification, pharmacy technicians indicate a significant desire to expand clinically and managerially allowing pharmacists more time in patient-facing/clinical roles.
Development and validation of a questionnaire to evaluate infection control in oral radiology
Pinelli, Camila; da Silva Tagliaferro, Elaine P; Corrente, José E; Ambrosano, Glaucia M B
2017-01-01
Objectives: To create and validate a questionnaire to evaluate infection control in oral radiology. Methods: The questionnaire was developed after review of the literature, which included published articles and the biosafety protocols available from healthcare agencies. The initial version of the questionnaire was composed of 14 multiple choice questions and was divided into 3 domains on handwashing, disinfection/protection of surfaces and disinfectant used. Content validity was assessed by two expert committees, which reviewed the content and scope of the questionnaire and the relevance of each item, respectively. Reliability was evaluated using test–retest and internal consistency methods with 115 undergraduate dentistry students. Construct validity was assessed using the known-groups technique and factor analysis. The known-groups technique involved 641 undergraduate dentistry students, 20 PhD students and 15 oral radiology professors. In the factor analysis, 3 radiology technicians also participated in addition to the 641 undergraduates, 20 PhD students and 15 oral radiology professors. Results: The content validity results were found to be satisfactory to excellent for the ordinal variables (intraclass correlation coefficient = 0.722–1.000) and good to great for the yes/no questions (kappa = 0.662–0.913) in terms of reliability and good internal consistency (Cronbach's alpha = 0.88). After a factor analysis, some questions were excluded, and the questions were grouped into new domains. Significant differences were observed between answers from different groups. The final version of the questionnaire was composed of nine domains. Conclusions: The questionnaire created was found to exhibit good psychometric properties for assessing infection control in oral radiology. PMID:28112553
Advanced Microcomputer Service Technician. Teacher Edition.
ERIC Educational Resources Information Center
Brown, A. O., III; Fulkerson, Dan, Ed.
This manual is the second of a three-text microcomputer service and repair series. This text addresses the training needs of "chip level" technicians who work with digital troubleshooting instruments to solve the complex microcomputer problems that are sent to them from computer stores that do not have full-service facilities. The manual contains…
Titov, Nickolai; Andrews, Gavin; Davies, Matthew; McIntyre, Karen; Robinson, Emma; Solley, Karen
2010-06-08
Internet-based cognitive behavioural therapy (iCBT) for depression is effective when guided by a clinician, less so if unguided. Would guidance from a technician be as effective as guidance from a clinician? Randomized controlled non-inferiority trial comparing three groups: Clinician-assisted vs. technician-assisted vs. delayed treatment. Community-based volunteers applied to the VirtualClinic (www.virtualclinic.org.au) research program, and 141 participants with major depressive disorder were randomized. Participants in the clinician- and technician-assisted groups received access to an iCBT program for depression comprising 6 online lessons, weekly homework assignments, and weekly supportive contact over a treatment period of 8 weeks. Participants in the clinician-assisted group also received access to a moderated online discussion forum. The main outcome measures were the Beck Depression Inventory (BDI-II) and the Patient Health QUESTIONnaire-9 Item (PHQ-9). Completion rates were high, and at post-treatment, both treatment groups reduced scores on the BDI-II (p<0.001) and PHQ-9 (p<0.001) compared to the delayed treatment group but did not differ from each other. Within group effect sizes on the BDI-II were 1.27 and 1.20 for the clinician- and technician-assisted groups respectively, and on the PHQ-9, were 1.54 and 1.60 respectively. At 4-month follow-up participants in the technician group had made further improvements and had significantly lower scores on the PHQ-9 than those in the clinician group. A total of approximately 60 minutes of clinician or technician time was required per participant during the 8-week treatment program. Both clinician- and technician-assisted treatment resulted in large effect sizes and clinically significant improvements comparable to those associated with face-to-face treatment, while a delayed treatment control group did not improve. These results provide support for large scale trials to determine the clinical effectiveness and
Titov, Nickolai; Andrews, Gavin; Davies, Matthew; McIntyre, Karen; Robinson, Emma; Solley, Karen
2010-01-01
Background Internet-based cognitive behavioural therapy (iCBT) for depression is effective when guided by a clinician, less so if unguided. Question: Would guidance from a technician be as effective as guidance from a clinician? Method Randomized controlled non-inferiority trial comparing three groups: Clinician-assisted vs. technician-assisted vs. delayed treatment. Community-based volunteers applied to the VirtualClinic (www.virtualclinic.org.au) research program, and 141 participants with major depressive disorder were randomized. Participants in the clinician- and technician-assisted groups received access to an iCBT program for depression comprising 6 online lessons, weekly homework assignments, and weekly supportive contact over a treatment period of 8 weeks. Participants in the clinician-assisted group also received access to a moderated online discussion forum. The main outcome measures were the Beck Depression Inventory (BDI-II) and the Patient Health Questionnaire-9 Item (PHQ-9). Completion rates were high, and at post-treatment, both treatment groups reduced scores on the BDI-II (p<0.001) and PHQ-9 (p<0.001) compared to the delayed treatment group but did not differ from each other. Within group effect sizes on the BDI-II were 1.27 and 1.20 for the clinician- and technician-assisted groups respectively, and on the PHQ-9, were 1.54 and 1.60 respectively. At 4-month follow-up participants in the technician group had made further improvements and had significantly lower scores on the PHQ-9 than those in the clinician group. A total of approximately 60 minutes of clinician or technician time was required per participant during the 8-week treatment program. Conclusions Both clinician- and technician-assisted treatment resulted in large effect sizes and clinically significant improvements comparable to those associated with face-to-face treatment, while a delayed treatment control group did not improve. These results provide support for large scale trials to
Pulmonary Foreign Body Granulomatosis in Dental Technician.
Chung, Sung Jun; Koo, Gun Woo; Park, Dong Won; Kwak, Hyun Jung; Yhi, Ji Young; Moon, Ji-Yong; Kim, Sang-Heon; Sohn, Jang Won; Yoon, Ho Joo; Shin, Dong Ho; Park, Sung Soo; Pyo, Ju Yeon; Oh, Young-Ha; Kim, Tae-Hyung
2015-10-01
Occupational lung diseases are caused by several toxic substances including heavy metals; however, the exact pathologic mechanisms remain unknown. In the workplace, dental technicians are often exposed to heavy metals such as cobalt, nickel, or beryllium and occasionally develop occupational lung diseases. We described a case of occupational lung disease in a patient who was employed as a dental technician for over a decade. A 31-year-old, non-smoking woman presented with productive cough and shortness of breath of several weeks duration. Chest computed tomography revealed a large number of scattered, bilateral small pulmonary nodules throughout the lung field, and multiple mediastinal lymph nodes enlargement. Percutaneous needle biopsy showed multifocal small granulomas with foreign body type giant cells suggestive of heavy metals inhalation. The patient's condition improved on simple avoidance strategy for several months. This case highlighted the importance of proper workplace safety.
Staphylococcus aureus with Panton-Valentine toxin skin infection in a medical laboratory technician.
Pougnet, Richard; Pougnet, Laurence
2016-12-01
This report exposes the case of a Staphylococcus aureus infection occurring in a microbiology laboratory technician. He was a 52 year-old man without medical history. He presented an abscess on the anterior aspect of the left forearm. Analysis showed that it was a Staphylococcus aureus secreting the Panton-Valentine toxin. The study of the workplace found the frequency of exposure. The study of workstation showed the link between the technician position and the infection. Indeed, this man touched an area where the biocleaning was hard to do. This is the first case of infection with PVL described for a laboratory technician.
So You Want to Train Solar Technicians.
ERIC Educational Resources Information Center
Ensign, M. Dale; Richins, Michael Paul
1978-01-01
Considers the role of solar energy in meeting the nation's energy requirements and the future needs for solar technicians and mechanics. Discusses the precautions community colleges must take in training these workers, to ensure that the demand be met without flooding the job market. (MB)
Animal Management Technician. Ohio's Competency Analysis Profile.
ERIC Educational Resources Information Center
Ohio State Univ., Columbus. Vocational Instructional Materials Lab.
Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for animal management technician occupations. The list contains units (with and without subunits), competencies, and…
Outdoor Power Equipment Technician Program. Apprenticeship Training.
ERIC Educational Resources Information Center
Alberta Learning, Edmonton. Apprenticeship and Industry Training.
This document presents information about the apprenticeship training program of Alberta, Canada, in general and the outdoor power equipment technician program in particular. The first part of the document discusses the following items: Alberta's apprenticeship and industry training system; the apprenticeship and industry training committee…
Federal Radiological Monitoring and Assessment Center Monitoring Manual Volume 1, Operations
DOE Office of Scientific and Technical Information (OSTI.GOV)
NSTec Aerial Measurement Systems
2012-07-31
The Monitoring division is primarily responsible for the coordination and direction of: Aerial measurements to delineate the footprint of radioactive contaminants that have been released into the environment. Monitoring of radiation levels in the environment; Sampling to determine the extent of contaminant deposition in soil, water, air and on vegetation; Preliminary field analyses to quantify soil concentrations or depositions; and Environmental and personal dosimetry for FRMAC field personnel, during a Consequence Management Response Team (CMRT) and Federal Radiological Monitoring and Assessment Center (FRMAC) response. Monitoring and sampling techniques used during CM/FRMAC operations are specifically selected for use during radiological emergenciesmore » where large numbers of measurements and samples must be acquired, analyzed, and interpreted in the shortest amount of time possible. In addition, techniques and procedures are flexible so that they can be used during a variety of different scenarios; e.g., accidents involving releases from nuclear reactors, contamination by nuclear waste, nuclear weapon accidents, space vehicle reentries, or contamination from a radiological dispersal device. The Monitoring division also provides technicians to support specific Health and Safety Division activities including: The operation of the Hotline; FRMAC facility surveys; Assistance with Health and Safety at Check Points; and Assistance at population assembly areas which require support from the FRMAC. This volume covers deployment activities, initial FRMAC activities, development and implementation of the monitoring and assessment plan, the briefing of field teams, and the transfer of FRMAC to the EPA.« less
Recovery Act: Training Program Development for Commercial Building Equipment Technicians
DOE Office of Scientific and Technical Information (OSTI.GOV)
Leah Glameyer
The overall goal of this project has been to develop curricula, certification requirements, and accreditation standards for training on energy efficient practices and technologies for commercial building technicians. These training products will advance industry expertise towards net-zero energy commercial building goals and will result in a substantial reduction in energy use. The ultimate objective is to develop a workforce that can bring existing commercial buildings up to their energy performance potential and ensure that new commercial buildings do not fall below their expected optimal level of performance. Commercial building equipment technicians participating in this training program will learn how tomore » best operate commercial buildings to ensure they reach their expected energy performance level. The training is a combination of classroom, online and on-site lessons. The Texas Engineering Extension Service (TEEX) developed curricula using subject matter and adult learning experts to ensure the training meets certification requirements and accreditation standards for training these technicians. The training targets a specific climate zone to meets the needs, specialized expertise, and perspectives of the commercial building equipment technicians in that zone. The combination of efficient operations and advanced design will improve the internal built environment of a commercial building by increasing comfort and safety, while reducing energy use and environmental impact. Properly trained technicians will ensure equipment operates at design specifications. A second impact is a more highly trained workforce that is better equipped to obtain employment. Organizations that contributed to the development of the training program include TEEX and the Texas Engineering Experiment Station (TEES) (both members of The Texas A&M University System). TEES is also a member of the Building Commissioning Association. This report includes a description of the project
[EEG technician-nurse collaboration during stereo-electroencephalography].
Jomard, Caroline; Benghezal, Mouna; Cheramy, Isabelle; De Beaumont, Ségolène
2017-01-01
Drug-resistant epilepsy has significant repercussions on the daily life of children. Surgery may represent a hope. The nurse and the electroencephalogram technician carry out important teamwork during pre-surgical assessment tests and notably the stereo-electroencephalography. Copyright © 2016 Elsevier Masson SAS. All rights reserved.
Illinois Occupational Skill Standards: Automotive Technician Cluster.
ERIC Educational Resources Information Center
Illinois Occupational Skill Standards and Credentialing Council, Carbondale.
This document, which is intended as a guide for work force preparation program providers, details the Illinois occupational skill standards for programs preparing students for employment in occupations in the automotive technician cluster. The document begins with overviews of the Illinois perspective on occupational skill standards and…
Illinois Occupational Skill Standards: Telecommunications Technician Cluster.
ERIC Educational Resources Information Center
Illinois Occupational Skill Standards and Credentialing Council, Carbondale.
This document, which is intended as a guide for workforce preparation program providers, details the Illinois Occupational Skill Standards for programs preparing students for employment in the telecommunications technician occupational cluster. The document begins with a brief overview of the Illinois perspective on occupational skills standards…
Markovic, Marija; Mathis, A Scott; Ghin, Hoytin Lee; Gardiner, Michelle; Fahim, Germin
2017-01-01
To compare the medication history error rate of the emergency department (ED) pharmacy technician with that of nursing staff and to describe the workflow environment. Fifty medication histories performed by an ED nurse followed by the pharmacy technician were evaluated for discrepancies (RN-PT group). A separate 50 medication histories performed by the pharmacy technician and observed with necessary intervention by the ED pharmacist were evaluated for discrepancies (PT-RPh group). Discrepancies were totaled and categorized by type of error and therapeutic category of the medication. The workflow description was obtained by observation and staff interview. A total of 474 medications in the RN-PT group and 521 in the PT-RPh group were evaluated. Nurses made at least one error in all 50 medication histories (100%), compared to 18 medication histories for the pharmacy technician (36%). In the RN-PT group, 408 medications had at least one error, corresponding to an accuracy rate of 14% for nurses. In the PT-RPh group, 30 medications had an error, corresponding to an accuracy rate of 94.4% for the pharmacy technician ( P < 0.0001). The most common error made by nurses was a missing medication (n = 109), while the most common error for the pharmacy technician was a wrong medication frequency (n = 19). The most common drug class with documented errors for ED nurses was cardiovascular medications (n = 100), while the pharmacy technician made the most errors in gastrointestinal medications (n = 11). Medication histories obtained by the pharmacy technician were significantly more accurate than those obtained by nurses in the emergency department.
Juszczyk, A S; Clark, R K F; Radford, D R
2009-05-23
The General Dental Council states that 'good dental care is delivered by a team' and restorative treatment is enhanced by communication between team members. Commercial dental laboratories are ideally placed to comment on effective communication. To investigate contemporary attitudes and communication between dentist and dental technician from the technician's perspective. Eight hundred and three dental laboratories were invited to take part in a postal survey covering dentist/laboratory communication and the dentist's understanding of technical procedures. Forty percent of laboratories responded. Only 9% scored communication as very good, 48% scored communication with newly qualified dentists better than with established dentists but only 26% considered that dental students were taught to communicate with dental laboratories effectively. The free comments that the respondents were invited to make identified three distinct themes, 'recognition within the dental team', 'effective communication between dentist and dental technician' and 'dentists lack of technical knowledge'. Effective communication between dentist and dental technician is often poor. It was the view of the dental technicians who responded that newly qualified dentists do not have an appropriate understanding of technical techniques. Dental schools are still not preparing new graduates to communicate effectively with dental laboratories.
Amirov, Z R
2005-01-01
To protect health and to warn future workers against the choice of a petroleum job that was not in accord with their psychological and physiological features of their organism, studies (such as sanitary and psychophysiological ones) were conducted to create criteria for the professional selection of drilling technicians who provided the sinking of oil wells. The studies have been systematized and mathematically analyzed. This made it possible to reveal the significant psychophysiological properties (8 parameters) in a drilling technician. By taking into account these properties, the author derived a linear equation that estimates the fitness of a candidate for a job as a drilling technician.
Educational needs and employment status of Scottish dental technicians.
Ross, M K; Ibbetson, R J
2005-07-23
To investigate the educational needs and employment status of dental technicians in Scotland. Two hundred and fifty dental technicians with postal addresses in Scotland. Structured questionnaire. An 83% response rate was achieved following three mailings. The majority of respondents were employed in commercial dental laboratories largely within the 'central belt' of Scotland, with 96% stating they were in full-time employment. Only 33% of these essential health-care workers were voluntarily registered with the Dental Technicians' Association, suggesting that a significant number had not felt it necessary or beneficial to do so. A lack of educational structure was identified, as was poor remuneration and an absence of opportunity for career progression. Although the prospect of continuing professional development was desirable, many respondents reported that they would be penalised financially for undertaking this and, in addition, may not be given the opportunity to pursue education because of lack of co-operation from their employer. Only 47% had attended an educational event within the preceding year, and of those who had not done this, a period of two-32 years had elapsed since any CPD involvement. Of the respondents, only 34% stated that any financial assistance had been available for educational purposes, with access to education being highlighted as problematic by 68%. A total of 64% of subjects felt they were out-of-date with professional education. This study highlights a number of real and potential problems in the field of education in dental technology. It is apparent that change within the structure of education and professional status, although largely welcomed, may be difficult to implement. The profession, as a whole, must realise that these changes in education and employment are not optional, and should be embraced as a positive step which will hopefully raise the profile and status of dental technicians throughout the UK.
Animal Management Technician. Occupational Competency Analysis Profile.
ERIC Educational Resources Information Center
Ohio State Univ., Columbus. Vocational Instructional Materials Lab.
This Occupational Competency Analysis Profile (OCAP) for animal management technician (AMT) is a competency list verified by expert workers that evolved from a job analysis. It identifies occupational, academic, and employability competencies needed to enter the occupation; lists and clusters them into broader units; and details the competency…
Math for Textile Technicians. Workforce 2000 Partnership.
ERIC Educational Resources Information Center
Enterprise State Junior Coll., AL.
This curriculum package on math for textile technicians has been developed by the Workforce 2000 Partnership, a network of industries and educational institutions provides training in communication, computation, and creative thinking to employees and supervisors in textile, apparel, and carpet industries at 15 plants in Alabama, Georgia, and South…
Preparing technicians for engineering materials technology
NASA Technical Reports Server (NTRS)
Jacobs, James A.; Metzloff, Carlton H.
1990-01-01
A long held principle is that for every engineer and scientist there is a need for ten technicians to maximize the efficiency of the technology team for meeting needs of industry and government. Developing an adequate supply of technicians to meet the requirements of the materials related industry will be a challenge and difficult to accomplish. A variety of agencies feel the need and wish to support development of engineering materials technology programs. In a joint effort among Battelle Laboratories, the Department of Energy (DOE) and Northwest College and University Association for Science (NORCUS), the development of an engineering materials technology program for vocational programs and community colleges for the Pacific Northwest Region was recently completed. This effort has implications for a national model. The model Associate of Applied Science degree in Engineering Materials Technology shown provides a general structure. It purposely has course titles which need delimiting while also including a core of courses necessary to develop cognitive, affective and psychomotor skills with the underlining principles of math, science and technology so students have job entry skills, and so that students can learn about and adapt to evolving technology.
[Task sharing with radiotherapy technicians in image-guided radiotherapy].
Diaz, O; Lorchel, F; Revault, C; Mornex, F
2013-10-01
The development of accelerators with on-board imaging systems now allows better target volumes reset at the time of irradiation (image-guided radiotherapy [IGRT]). However, these technological advances in the control of repositioning led to a multiplication of tasks for each actor in radiotherapy and increase the time available for the treatment, whether for radiotherapy technicians or radiation oncologists. As there is currently no explicit regulatory framework governing the use of IGRT, some institutional experiments show that a transfer is possible between radiation oncologists and radiotherapy technicians for on-line verification of image positioning. Initial training for every technical and drafting procedures within institutions will improve audit quality by reducing interindividual variability. Copyright © 2013. Published by Elsevier SAS.
Work group design in pharmacy: the pharmacist-technician team.
Kershaw, B P; Solomon, D K; Zarowitz, B J
1987-05-01
The contemporary pharmacy practice manager faces the challenge of designing pharmacy service programs that not only satisfy the needs of the patient, but at the same time satisfy and motivate the pharmacists and technicians who sustain the programs. This research examined the team design, which has been recommended but not fully described in the literature. This application did not explore the full potential of the team design in the hospital pharmacy setting. More study is needed in this area to assess the impact of work group design on the expansion of clinical programs, employee turnover rates, quality and quantity of work produced, and, most important, the impact on job satisfaction enjoyed by pharmacists and technicians.
Nakanishi, Satoshi; Kamigiri, Akira; Yamada, Tsuyoshi; Nanba, Kazuyoshi; Kitano, Tokio; Ito, Morihiro
2011-01-01
We conducted a questionnaire consciousness survey concerning qualification acquisition of licentiate and degrees among 406 radiological technologists working for medical facility in Mie Prefecture. We employed a mail-back questionnaire method. Then we analyzed relationships between progressive purpose and gender, age, and membership of the Japanese Society of Radiological Technology (JSRT). Results derived note the most common licentiate the participants wanted to acquire was the license concerning emergency medical care. On the other hand, they had limited interest in radiation therapy, nuclear medicine areas and the working environment measurement expert class I. In conclusion, the results of this study revealed the present condition that the necessity of qualification acquisition of licentiate is not recognized incorrectly. In addition, there was a mountain of issues for working radiological technologists to attend graduate school to get degrees. It is important to utilize the results of this study to enlighten their consciousness for limited interest licentiate, and interest them in attending graduate schools.
Markovic, Marija; Mathis, A. Scott; Ghin, Hoytin Lee; Gardiner, Michelle; Fahim, Germin
2017-01-01
Purpose: To compare the medication history error rate of the emergency department (ED) pharmacy technician with that of nursing staff and to describe the workflow environment. Methods: Fifty medication histories performed by an ED nurse followed by the pharmacy technician were evaluated for discrepancies (RN-PT group). A separate 50 medication histories performed by the pharmacy technician and observed with necessary intervention by the ED pharmacist were evaluated for discrepancies (PT-RPh group). Discrepancies were totaled and categorized by type of error and therapeutic category of the medication. The workflow description was obtained by observation and staff interview. Results: A total of 474 medications in the RN-PT group and 521 in the PT-RPh group were evaluated. Nurses made at least one error in all 50 medication histories (100%), compared to 18 medication histories for the pharmacy technician (36%). In the RN-PT group, 408 medications had at least one error, corresponding to an accuracy rate of 14% for nurses. In the PT-RPh group, 30 medications had an error, corresponding to an accuracy rate of 94.4% for the pharmacy technician (P < 0.0001). The most common error made by nurses was a missing medication (n = 109), while the most common error for the pharmacy technician was a wrong medication frequency (n = 19). The most common drug class with documented errors for ED nurses was cardiovascular medications (n = 100), while the pharmacy technician made the most errors in gastrointestinal medications (n = 11). Conclusion: Medication histories obtained by the pharmacy technician were significantly more accurate than those obtained by nurses in the emergency department. PMID:28090164
Al-Worafi, Yaser Mohammed; Kassab, Yaman Walid; Alseragi, Wafa Mohammed; Almutairi, Masaad Saeed; Ahmed, Ali; Ming, Long Chiau; Alkhoshaiban, Ali Saleh; Hadi, Muhammad Abdul
2017-01-01
The aim of this study was to compare the knowledge, attitude and barriers of pharmacy technicians and pharmacists toward pharmacovigilance, adverse drug reactions (ADRs) and ADR reporting in community pharmacies in Yemen. This cross-sectional survey was conducted among community pharmacists and pharmacy technicians in the capital of Yemen, Sana'a. A total of 289 community pharmacies were randomly selected. The validated and pilot-tested questionnaire consisted of six sections: demographic data, knowledge about pharmacovigilance, experience with ADR reporting, attitudes toward ADR reporting, and the facilitators to improve ADR reporting. A total of 428 pharmacy technicians and pharmacists were contacted and 179 went on to complete a questionnaire (response rate: 41.8%). Of the 179 respondents, 21 (11.7%) were pharmacists and 158 (88.3%) were pharmacy technicians, of which, 176 (98.3%) were male and 3 (1.7%) were female. The mean age of the respondents was 25.87±2.63 years. There was a significant difference between the pharmacists and pharmacy technicians in terms of knowledge scores ( P <0.05). The mean knowledge scores for pharmacists was 3.33±2.852 compared to 0.15±0.666 for pharmacy technicians. With regard to attitudes toward ADR reporting, all pharmacists (100%) showed a positive attitude, while only 43% of pharmacy technicians showed a positive attitude. Pharmacists have a significantly better knowledge than pharmacy technicians with regard to pharmacovigilance. More than half of pharmacy technicians showed a negative attitude toward ADR reporting. Therefore, educational interventions and training is very important for community pharmacists and pharmacy technicians in Yemen to increase their awareness and participation in ADR reporting.
Al-Worafi, Yaser Mohammed; Kassab, Yaman Walid; Alseragi, Wafa Mohammed; Almutairi, Masaad Saeed; Ahmed, Ali; Ming, Long Chiau; Alkhoshaiban, Ali Saleh; Hadi, Muhammad Abdul
2017-01-01
Objective The aim of this study was to compare the knowledge, attitude and barriers of pharmacy technicians and pharmacists toward pharmacovigilance, adverse drug reactions (ADRs) and ADR reporting in community pharmacies in Yemen. Methods This cross-sectional survey was conducted among community pharmacists and pharmacy technicians in the capital of Yemen, Sana’a. A total of 289 community pharmacies were randomly selected. The validated and pilot-tested questionnaire consisted of six sections: demographic data, knowledge about pharmacovigilance, experience with ADR reporting, attitudes toward ADR reporting, and the facilitators to improve ADR reporting. Results A total of 428 pharmacy technicians and pharmacists were contacted and 179 went on to complete a questionnaire (response rate: 41.8%). Of the 179 respondents, 21 (11.7%) were pharmacists and 158 (88.3%) were pharmacy technicians, of which, 176 (98.3%) were male and 3 (1.7%) were female. The mean age of the respondents was 25.87±2.63 years. There was a significant difference between the pharmacists and pharmacy technicians in terms of knowledge scores (P<0.05). The mean knowledge scores for pharmacists was 3.33±2.852 compared to 0.15±0.666 for pharmacy technicians. With regard to attitudes toward ADR reporting, all pharmacists (100%) showed a positive attitude, while only 43% of pharmacy technicians showed a positive attitude. Conclusion Pharmacists have a significantly better knowledge than pharmacy technicians with regard to pharmacovigilance. More than half of pharmacy technicians showed a negative attitude toward ADR reporting. Therefore, educational interventions and training is very important for community pharmacists and pharmacy technicians in Yemen to increase their awareness and participation in ADR reporting. PMID:28924350
Rapid methods for jugular bleeding of dogs requiring one technician.
Frisk, C S; Richardson, M R
1979-06-01
Two methods were used to collect blood from the jugular vein of dogs. In both techniques, only one technician was required. A rope with a slip knot was placed around the base of the neck to assist in restraint and act as a tourniquet for the vein. The technician used one hand to restrain the dog by the muzzle and position the head. The other hand was used for collecting the sample. One of the methods could be accomplished with the dog in its cage. The bleeding techniques were rapid, requiring approximately 1 minute per dog.
Huerkamp, Michael J
2006-09-01
The turnover of veterinary technicians within an animal resources program averaged 33% annually over 18 y, peaking at 67% in 1998 to 1999. Insufficient retention of veterinary technicians led to diversion of veterinarian effort to technical tasks and to increased allocation of administrative resources for supervising and managing an expanding team of veterinary technicians. To identify factors and trends related to poor retention, address any causes, and reduce turnover, a retrospective analysis of employment records was done. The retention of veterinary technicians was significantly greater for the 9 technicians hired from veterinary private practice rather than for any of 3 other general sources: promotions from the animal care staff, transfers from other research institutions, and miscellaneous sources. Veterinary technician turnover was reduced from a mean of 60% over 1995 to 1999 to an average of 26% during 2000 to 2004. Higher retention was associated with management practices that included renewed concentration on recruiting and interviewing strategies and emphasis on training and career development including merit raises for technician certification through the American Association for Laboratory Animal Science. Higher retention yielded correspondingly greater experience on the job as the mean tenure increased from 1.1 y in 2000 to 2.8 y in 2004. The most valued attributes related to employment by veterinary technicians as determined by survey were to do meaningful work, earn a good living, and have a committed team of coworkers.
Mental Health Manpower and the Psychiatric Technician.
ERIC Educational Resources Information Center
National Association of Psychiatric Technology, Sacramento, CA.
Dynamic changes are taking place in the field of mental health care which have a great effect on those people who provide the primary services of patient care, rehabilitation, and training. In recognition of these changes, the National Association of Psychiatric Technology selected "Mental Health Manpower and the Psychiatric Technician"…
National Employment Outlook for Medical Record Technicians.
ERIC Educational Resources Information Center
Passmore, David Lynn; And Others
1983-01-01
Contains estimates of future employment levels and annual job openings through 1985 for medical record technicians (MRTs). This information is compared to enrollment and completion date for MRT training programs certified by the American Medical Association to determine the adequacy of the current supply of MRTs in light of future MRT…
Robotics Technician Training at Macomb Community College.
ERIC Educational Resources Information Center
Lynch, Edward J.
Approved in 1979, the robotics technician training program at Macomb County Community College (MCC) in Warren (Michigan) provides students with training in hydraulics and electronics as well as with hands-on training in the area of robotics. Furthermore, the program faculty includes individuals with work experience in electronics, fluid power, and…
Boughen, Melanie; Sutton, Jane; Fenn, Tess
2017-01-01
Background: Traditionally, pharmacy technicians have worked alongside pharmacists in community and hospital pharmacy. Changes within pharmacy provide opportunity for role expansion and with no apparent career pathway, there is a need to define the current pharmacy technician role and role in medicines optimisation. Aim: To capture the current roles of pharmacy technicians and identify how their future role will contribute to medicines optimisation. Methods: Following ethical approval and piloting, an online survey to ascertain pharmacy technicians’ views about their roles was undertaken. Recruitment took place in collaboration with the Association of Pharmacy Technicians UK. Data were exported to SPSS, data screened and descriptive statistics produced. Free text responses were analysed and tasks collated into categories reflecting the type of work involved in each task. Results: Responses received were 393 (28%, n = 1380). Results were organised into five groups: i.e., hospital, community, primary care, General Practitioner (GP) practice and other (which included HM Prison Service). Thirty tasks were reported as commonly undertaken in three or more settings and 206 (84.7%, n = 243) pharmacy technicians reported they would like to expand their role. Conclusions: Tasks core to hospital and community pharmacy should be considered for inclusion to initial education standards to reflect current practice. Post qualification, pharmacy technicians indicate a significant desire to expand clinically and managerially allowing pharmacists more time in patient-facing/clinical roles. PMID:28970452
Oral health technicians in Brazilian primary health care: potentials and constraints.
Aguiar, Dulce Maria Lucena de; Tomita, Nilce Emy; Machado, Maria de Fátima Antero Sousa; Martins, Cleide Lavieri; Frazão, Paulo
2014-07-01
Different perspectives on the role of mid-level workers in health care might represent a constraint to health policies. This study aimed to investigate how different agents view the participation of oral health technicians in direct activities of oral healthcare with the goal of understanding the related symbolic dispositions. Theoretical assumptions related to inter-professional collaboration and conflicts in the field of healthcare were used for this analysis. A researcher conducted 24 in-depth interviews with general dental practitioners, oral health technicians and local managers. The concepts of Pierre Bourdieu supported the data interpretation. The results indicated inter-professional relations marked by collaboration and conflict that reflect an action space related to different perspectives of primary care delivery. They also unveiled the symbolic devices related to the participation of oral health technicians that represent a constraint to the implementation of oral health policy, thus reducing the potential of primary health care in Brazil.
Quality Control Technician Curriculum. An Elusive Butterfly.
ERIC Educational Resources Information Center
Holler, Michael
Defining and developing a quality control technician curriculum for an associate degree program is a difficult and puzzling job. There are as many definitions of quality control and curriculum ideas as there are educators asked. However, one could start by dividing the field into its major areas--heavy manufacturing, maintenance, research, and…
Akintunde, Adeseye A; Oloyede, Taiwo W
2017-11-01
To determine occupational association with metabolic syndrome among auto technicians and school teachers. One hundred and sixty six subjects were selected for this study. Clinical data was obtained while laboratory investigations including plasma glucose and lipid profile were performed. Statistical analysis was done with SPSS 20.0. P<0.05 was taken as statistically significant. School teachers had significantly higher mean total cholesterol and LDL-cholesterol compared to auto technicians. Mean serum triglycerides was significantly higher among auto-technicians compared to school teachers in this study. The prevalence of some conventional cardiovascular risk factors was significantly higher among auto-technicians compared to school teachers: Impaired blood glucose (9.6% vs. 1.2%, p<0.05), hypertriglyceridaemia (18.1% vs. 7.2%, p<0.05) and low HDL-Cholesterol (47.0% vs. 37.3%, p<0.05) respectively. However elevated LDL-cholesterol (56.6% vs. 32.5%, p<0.05) was significantly more common among school teachers compared to auto-technicians. Based on the WHO and the Harmonized criteria, metabolic syndrome was more frequent among auto-technicians compared to school teachers. (8.4% vs. 1.2% and 19.3% vs. 7.2% respectively, p<0.05) CONCLUSION: The prevalence of metabolic syndrome appears to be significantly higher among auto technicians despite their high level of physical activity, exertion and education compared to teachers. This may be related to the increased occupational exposure to organic and inorganic materials from dust particles, oil and oil related matter and particulate matter among auto technicians. Prompt definitive evaluation of this concept and appropriate health education to encourage safety mechanism can reduce this burden of metabolic syndrome among auto technicians in Nigeria. Copyright © 2016 Diabetes India. Published by Elsevier Ltd. All rights reserved.
Illinois Occupational Skill Standards: Landscape Technician Cluster.
ERIC Educational Resources Information Center
Illinois Occupational Skill Standards and Credentialing Council, Carbondale.
This document of skill standards for the landscape technician cluster serves as a guide to workforce preparation program providers in defining content for their programs and to employers to establish the skills and standards necessary for job acquisition. These 19 occupational skill standards describe what people should know and be able to do in…
Chemical Technician Manpower Survey: State of Alabama.
ERIC Educational Resources Information Center
Watkins, Donald; And Others
The study was undertaken to assess the needs of Alabama's industry for chemical technicians and to determine the kinds and levels of skills required by major employers. Of the 75 organizations responding to the questionnaire with usable data, 62 were private industries, 6 were testing laboratories, and 7 were federal agencies. Generally, the study…
V-TECS Guide for Automobile Engine Performance Technician.
ERIC Educational Resources Information Center
Meyer, Calvin F.; Benson, Robert T.
This guide is intended to assist teachers responsible for instructing future auto engine performance technicians. The following topics are covered: diagnosing engine performance problems, ignition system problems, fuel system problems, mechanically related performance problems, emission control system problems, and electronic control systems;…
Examining Career Success of Minority and Women Emergency Medical Technicians (EMTs): A LEADS Project
ERIC Educational Resources Information Center
Russ-Eft, Darlene F.; Dickison, Philip D.; Levine, Roger
2008-01-01
Emergency medical technicians (EMTs) are a critical segment in prehospital medical care. This study examined EMT-paramedic career success focused on minorities and women, as part of the Longitudinal Emergency Medical Technician Attributes and Demographics Study (LEADS). The LEADS data come from a representative sampling of EMTs throughout the…
ERIC Educational Resources Information Center
Hull, Daniel M.; Lovett, James E.
The Robotics/Automated Systems Technician (RAST) project developed a robotics technician model curriculum for the use of state directors of vocational education and two-year college vocational/technical educators. A baseline management plan was developed to guide the project. To provide awareness, project staff developed a dissemination plan…
Analog and Digital Electronics. A Study Guide of the Science and Engineering Technician Curriculum.
ERIC Educational Resources Information Center
Cavanaugh, Vince; Greer, Marlin
This study guide is part of an interdisciplinary curriculum entitled the Science and Engineering Technician (SET) Curriculum devised to provide basic information to train technicians in the use of electronic instruments and their application. The program of study integrates elements from the disciplines of chemistry, physics, mathematics,…
Do American born Japanese children still grow faster than native Japanese?
Kano, K; Chung, C S
1975-09-01
Growth patterns of Japanese schoolchildren in Hawaii, composed of 2,954 boys and 3,213 girls aged between 11 and 17, were compared with those comparable groups of Japanese schoolchildren in Japan based on the data published by the Japanese Ministry of Education. Growth characteristics studied were height, weight, and relative weight index, weight/(height). The Hawaii-Japanese boys were taller at early ages but the difference disappeared by age 16. Native Japanese girls were shorter than Hawaii-Japanese until age 13, but they overtook the latter by age 14, exceeding them in height after age 15. A similar pattern was found in weights of girls but the Hawaii-Japanese boys remained consistently heavier by 5.0 to 9.0 kg than native Japanese. The relative weight measure indicated that the Hawaii boys were more "obese" than native Japanese boys for the growth period studied; whereas the same tendency was maintained until age 15 in girls. These observations indicate a marked degree of convergence of the patterns of physical growth of the two populations, whose differences were unmistakably in favor of American born children in earlier studies. It is concluded that the convergence is due largely to the improved environmental conditions in Japan in recent years.
Rural emergency medical technician pre-hospital electrocardiogram transmission.
Powell, A M; Halon, J M; Nelson, J
2014-01-01
Emergent care of the acute heart attack patient continues to be at the forefront of quality and cost reduction strategies throughout the healthcare industry. Although the average cardiac door-to-balloon (D2B) times have decreased substantially over the past few years, there are still vast disparities found in D2B times in populations that reside in rural areas. Such disparities are mostly related to prolonged travel time and subsequent delays in cardiac catherization lab team activation. Urban ambulance companies that are routinely staffed with paramedic level providers have been successful in the implementation of pre-hospital 12-lead electrocardiogram (ECG) protocols as a strategy to reduce D2B times. The authors sought to evaluate the evidence related to the risk and benefits associated with the replication of an ECG transmission protocol in a small rural emergency medical service. The latter is staffed with emergency medical technician-basics (EMT-B), emergency medical technician-advanced (EMT-A), and emergency medical technician-intermediate (EMT-I) level. The evidence reviewed was limited to studies with relevant data regarding the challenges and complexities of the ECG transmission process, the difficulties associated with ECG transmission in rural settings, and ECG transmission outcomes by provider level. The evidence supports additional research to further evaluate the feasibility of ECG transmission at the non-paramedic level. Multiple variables must be investigated including equipment cost, utilization, and rural transmission capabilities. Clearly, pre-hospital ECG transmission and early activation of the cardiac catheterization laboratory are critical components to successfully decreasing D2B times.
Modern Chemical Technology, Guidebook for Chemical Technicians.
ERIC Educational Resources Information Center
Pecsok, Robert L.; Chapman, Kenneth
This volume is a part of the ACS "Modern Chemical Technology" (ChemTeC) curriculum that is developed for chemical technicians. It is intended as a handbook that will be used throughout the instruction. Safety is stressed in eight of the ten chapters under the headings: safety in the chemical laboratory, personal protective equipment, fire safety…
Agricultural/Industrial Mechanical Technician. Ohio's Competency Analysis Profile.
ERIC Educational Resources Information Center
Ohio State Univ., Columbus. Vocational Instructional Materials Lab.
Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for agricultural/industrial mechanical technician occupations. The list contains units (with and without subunits),…
40 CFR 82.40 - Technician training and certification.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 40 Protection of Environment 18 2013-07-01 2013-07-01 false Technician training and certification. 82.40 Section 82.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR..., videos or a hands-on demonstration. (2) Test subject material. The certification tests must adequately...
40 CFR 82.40 - Technician training and certification.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 40 Protection of Environment 18 2014-07-01 2014-07-01 false Technician training and certification. 82.40 Section 82.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR..., videos or a hands-on demonstration. (2) Test subject material. The certification tests must adequately...
40 CFR 82.40 - Technician training and certification.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 40 Protection of Environment 18 2012-07-01 2012-07-01 false Technician training and certification. 82.40 Section 82.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR..., videos or a hands-on demonstration. (2) Test subject material. The certification tests must adequately...
Effects of occupational exposure of X-Ray on hematological parameters of diagnostic technicians
NASA Astrophysics Data System (ADS)
Taqi, Ali H.; Faraj, Kharman A.; Zaynal, Sarah A.; Hameed, Ahmed M.; Mahmood, Abd-Alkader A.
2018-06-01
The aim of this study was to identify the effects of long term exposure of X-ray on diagnostic technicians which they work at Kirkuk hospitals through examining some hematological parameters which are white blood cells (WBC), Neutrophils, Lymphocyte, Monocyte, Eosinophil, Basophil, Reactive Lymphocyte, red blood cells (RBC), hemoglobin (Hb), hematocrit (HCT), Mean Cell Volume (MCV), Mean Corpuscular Hemoglobin (MCH), Mean Cell Hemoglobin Concentration (MCHC), Red Cell Distribution Width (RDW), Platelet (PLT). The study included 54 male diagnostic technicians and 54 male healthy controls match with the first group to show any alteration of the hematological parameters. The diagnostic technicians divided into two groups depending on their work experience and hours working per day. The statistical analysis was performed using (Graph-pad) program. Our results showed that the Complete blood cells count (CBC) parameters (Neutrophil, Monocytes, Basophile, MCV, RDW and PLT) significantly (P<.05) decreased while the parameters (Lymphocytes, RBC, Hb and HCT) significantly (P<.05) increased and strong significantly (P<.0001) increasing was recorded for the parameter Reactive lymphocytes mostly in all groups of the diagnostic technicians compared with their controls. We concluded that chronic exposure of X-ray can significantly alter some hematological parameters and the number of hours working per day has observable effects on the some hematological parameters. We recommended training and courses about hazard of ionizing radiation should be organized for enhance the healthcare quality of the technicians and to improve their knowledge about benefit of radiation protection tools to protect themselves from any overexposure during the daily life.
ERIC Educational Resources Information Center
Espy, John; And Others
A project was conducted to field test selected first- and second-year courses in a postsecondary nuclear quality assurance/quality control (QA/QC) technician curriculum and to develop the teaching/learning modules for seven technical specialty courses remaining in the QA/QC technician curriculum. The field testing phase of the project involved the…
Yuasa, Isao; Akane, Atsushi; Yamamoto, Toshimichi; Matsusue, Aya; Endoh, Minoru; Nakagawa, Mayumi; Umetsu, Kazuo; Ishikawa, Takaki; Iino, Morio
2018-04-24
It is sometimes necessary to determine whether a forensic biological sample came from a Japanese person. In this study, we developed a 60-locus SNP assay designed for the differentiation of Japanese people from other East Asians using entirely and nearly Japanese-specific alleles. This multiplex assay consisted of 6 independent PCR reactions followed by single nucleotide extension. The average number and standard deviation of Japanese-specific alleles possessed by an individual were 0.81 ± 0.93 in 108 Koreans from Seoul, 8.87 ± 2.89 in 103 Japanese from Tottori, 17.20 ± 3.80 in 88 Japanese from Okinawa, and 0 in 220 Han Chinese from Wuxi and Changsha. The Koreans had 0-4 Japanese-specific alleles per individual, whereas the Japanese had 4-26 Japanese-specific alleles. Almost all Japanese were distinguished from the Koreans and other people by the factorial correspondence and principal component analyses. The Snipper program was also useful to estimate the degree of Japaneseness. The method described here was successfully applied to the differentiation of Japanese from non-Japanese people in forensic cases. This Japanese-specific SNP assay was named Japaneseplex. Copyright © 2018 Elsevier B.V. All rights reserved.
Effect of dental technician disparities on the 3-dimensional accuracy of definitive casts.
Emir, Faruk; Piskin, Bulent; Sipahi, Cumhur
2017-03-01
Studies that evaluated the effect of dental technician disparities on the accuracy of presectioned and postsectioned definitive casts are lacking. The purpose of this in vitro study was to evaluate the accuracy of presectioned and postsectioned definitive casts fabricated by different dental technicians by using a 3-dimensional computer-aided measurement method. An arch-shaped metal master model consisting of 5 abutments resembling prepared mandibular incisors, canines, and first molars and with a 6-degree total angle of convergence was designed and fabricated by computer-aided design and computer-aided manufacturing (CAD-CAM) technology. Complete arch impressions were made (N=110) from the master model, using polyvinyl siloxane (PVS) and delivered to 11 dental technicians. Each technician fabricated 10 definitive casts with dental stone, and the obtained casts were numbered. All casts were sectioned, and removable dies were obtained. The master model and the presectioned and postsectioned definitive casts were digitized with an extraoral scanner, and the virtual master model and virtual presectioned and postsectioned definitive casts were obtained. All definitive casts were compared with the master model by using computer-aided measurements, and the 3-dimensional accuracy of the definitive casts was determined with best fit alignment and represented in color-coded maps. Differences were analyzed using univariate analyses of variance, and the Tukey honest significant differences post hoc tests were used for multiple comparisons (α=.05). The accuracy of presectioned and postsectioned definitive casts was significantly affected by dental technician disparities (P<.001). The largest dimensional changes were detected in the anterior abutments of both of the definitive casts. The changes mostly occurred in the mesiodistal dimension (P<.001). Within the limitations of this in vitro study, the accuracy of presectioned and postsectioned definitive casts is susceptible
Technicians prepare to close hatches on Gemini 12 spacecraft
NASA Technical Reports Server (NTRS)
1966-01-01
Technicians prepare to close the hatches of the Gemini 12 spacecraft in the White Room atop Pad 19 after insertion of Astronauts James A. Lovell Jr. (leading), command pilot, and Edwin E. Aldrin Jr., pilot.
NHEXAS PHASE I ARIZONA STUDY--TECHNICIAN WALKTHROUGH QUESTIONNAIRE DATA
The Technician Walk-through Questionnaire data set updates information about each household from the Descriptive Questionnaire and includes relevant information regarding dwelling arrangements, as well as interior and exterior residential characteristics. The information is from...
Medical Laboratory Technician (Chemistry and Urinalysis). (AFSC 92470).
ERIC Educational Resources Information Center
Thompson, Joselyn H.
This four-volume student text is designed for use by Air Force personnel enrolled in a self-study extension course for medical laboratory technicians. Covered in the individual volumes are medical laboratory administration and clinical chemistry (career opportunities, general laboratory safety and materials, general medical laboratory…
Commercial Truck/Equipment Technician. Occupational Competency Analysis Profile.
ERIC Educational Resources Information Center
Ohio State Univ., Columbus. Vocational Instructional Materials Lab.
This Occupational Competency Analysis Profile (OCAP) for commercial truck and equipment technician is an employer-verified competency list that evolved from a modified DACUM (Developing a Curriculum) job analysis process involving business, industry, labor, and community agency representatives throughout Ohio. The task list of the National…
Feasibility Study of Training Environmental Technicians. Final Report.
ERIC Educational Resources Information Center
Vernon, James Y.; Garrett, Donald M.
A feasibility study and task analysis was performed to determine the future job potential within the Southern California area for environmental technicians trained under a proposed vocational training program in community colleges. Questionnaires were mailed to possible employers in government and industry to obtain information about their…
The AALAS Learning Library and its effectiveness as a tool for technician training.
Parker-Thornburg, Jan; Grabeel, Pam; Butler, Mark
2009-06-01
Computer-based training is potentially a useful means of gaining proficiency in various aspects of laboratory animal science. The authors present an overview of the AALAS Learning Library (ALL), an internet-based training system that was established in 2003 and is widely used for technician certification training and for IACUC-mandated training. To evaluate the effectiveness of the ALL as a tool for general training and for achieving certification, the AALAS Online Learning Committee initiated a review of the online courses. The authors analyzed the numbers of users who accessed different types of courses and completed exams in those courses. They also correlated ALL usage with pass rates in technician certification exams. Results suggest that the ALL is a highly effective method of training, particularly for technician certification.
Overtime work and blood pressure in normotensive Japanese male workers.
Nakamura, Koshi; Sakurai, Masaru; Morikawa, Yuko; Miura, Katsuyuki; Ishizaki, Masao; Kido, Teruhiko; Naruse, Yuchi; Suwazono, Yasushi; Nakagawa, Hideaki
2012-09-01
Epidemiological studies have observed conflicting patterns as to whether overtime work increases blood pressure (BP), probably as a consequence of methodological issues. We conducted a prospective cohort study to investigate the relationship between overtime work hours and 1-year changes in BP in 1,235 normotensive Japanese male workers who carried out a variety of jobs in a manufacturing factory. Casual BP measurements were repeated at annual health examinations in 2004-2005, using an automatic manometer. An analysis of covariance that incorporated potential confounding factors including baseline age, body mass index (BMI), and lifestyle factors was used to calculate and compare the means of the 1-year change in systolic (SBP) and diastolic BP (DBP). The participants were grouped according to their average monthly overtime work hours obtained from timecard data between April and September 2004. The multivariate-adjusted mean for 1-year change in DBP in 611 male assembly-line workers was 1.5 mm Hg (95% confidence interval (CI) 0.8-2.2) for <40.0 h/month, 2.3 mm Hg (95% CI 1.3-3.2) for 40.0-79.9 h/month, and 5.3 mm Hg (95% CI 2.7-7.9) for ≥ 80.0 h/month (P for heterogeneity = 0.02). A broadly similar pattern was observed for SBP. In contrast, there was no significant difference in means 1-year change for both SBP and DBP in 315 clerks and 309 engineers/special technicians, grouped according to overtime work hours. Extensive overtime work was associated with increased BP in normotensive male assembly-line workers, but not in clerks and engineers/special technicians.
Computer Vision Tool and Technician as First Reader of Lung Cancer Screening CT Scans.
Ritchie, Alexander J; Sanghera, Calvin; Jacobs, Colin; Zhang, Wei; Mayo, John; Schmidt, Heidi; Gingras, Michel; Pasian, Sergio; Stewart, Lori; Tsai, Scott; Manos, Daria; Seely, Jean M; Burrowes, Paul; Bhatia, Rick; Atkar-Khattra, Sukhinder; van Ginneken, Bram; Tammemagi, Martin; Tsao, Ming Sound; Lam, Stephen
2016-05-01
To implement a cost-effective low-dose computed tomography (LDCT) lung cancer screening program at the population level, accurate and efficient interpretation of a large volume of LDCT scans is needed. The objective of this study was to evaluate a workflow strategy to identify abnormal LDCT scans in which a technician assisted by computer vision (CV) software acts as a first reader with the aim to improve speed, consistency, and quality of scan interpretation. Without knowledge of the diagnosis, a technician reviewed 828 randomly batched scans (136 with lung cancers, 556 with benign nodules, and 136 without nodules) from the baseline Pan-Canadian Early Detection of Lung Cancer Study that had been annotated by the CV software CIRRUS Lung Screening (Diagnostic Image Analysis Group, Nijmegen, The Netherlands). The scans were classified as either normal (no nodules ≥1 mm or benign nodules) or abnormal (nodules or other abnormality). The results were compared with the diagnostic interpretation by Pan-Canadian Early Detection of Lung Cancer Study radiologists. The overall sensitivity and specificity of the technician in identifying an abnormal scan were 97.8% (95% confidence interval: 96.4-98.8) and 98.0% (95% confidence interval: 89.5-99.7), respectively. Of the 112 prevalent nodules that were found to be malignant in follow-up, 92.9% were correctly identified by the technician plus CV compared with 84.8% by the study radiologists. The average time taken by the technician to review a scan after CV processing was 208 ± 120 seconds. Prescreening CV software and a technician as first reader is a promising strategy for improving the consistency and quality of screening interpretation of LDCT scans. Copyright © 2016 International Association for the Study of Lung Cancer. Published by Elsevier Inc. All rights reserved.
Technicians close hatches on Gemini 11 spacecraft during countdown
NASA Technical Reports Server (NTRS)
1966-01-01
Technicians in the White Room atop Pad 19 prepare to close hatches on the Gemini 11 spacecraft during prelaunch countdown. Inside the spacecraft are Astronauts Charles Conrad Jr., command pilot, and Richard F. Gordon Jr., pilot.
Emergency Medical Technician Series. Duty Task List.
ERIC Educational Resources Information Center
Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.
This document contains the occupational duty/task lists for 12 duties in the occupation of emergency medical technician. Each duty is divided into a number of tasks. A separate page for each duty lists the task with its code number and columns to indicate whether that particular duty has been taught and to provide space for comments. The 12 duties…
NHEXAS PHASE I MARYLAND STUDY--STANDARD OPERATING PROCEDURE FOR TRAINING OF FIELD TECHNICIANS (G07)
The purpose of this SOP is to describe the method used for training field technicians. The SOP outlines the responsibilities of the Field Technician (FT) and the Field Coordination Center Supervisor (FCC-S) before, during, and after sampling at residences, and the training syste...
Tansey, E.M.
2008-01-01
This paper reports results from a detailed study of the careers of laboratory technicians in British medical research. Technicians and their contributions are very frequently missing from accounts of modern medicine, and this project is an attempt to correct that absence. The present paper focuses almost entirely on the Medical Research Council's National Institute for Medical Research in North London, from the first proposal of such a body in 1913 until the mid 1960s. The principal sources of information have been technical staff themselves, largely as recorded in an extensive series of oral history interviews. These have covered a wide range of issues and provide valuable perspectives about technicians' backgrounds and working lives. PMID:18548906
ERIC Educational Resources Information Center
Shin, Masako T.
This English-Thai lexicon and program introduction for fiberglass technician is one of eight documents in the Multicultural Competency-Based Vocational/Technical Curricula Series. It is intended for use in postsecondary, adult, and preservice teacher and administrator education. The first two sections provide Thai equivalencies of English…
Technicians complete foaming around Atlantis', OV-104, 17" ET feed line
1990-07-10
Technicians complete foaming around the area of Atlantis, Orbiter Vehicle (OV) 104, 17 inch diameter external tank (ET) feed line in preparation for the second liquid hydrogen tanking test at the Kennedy Space Center (KSC). An elaborate network of sensors, leak detectors, and baggies were set up on OV-104 by technicians. Engineers hope this extra instrumentation will help pinpoint the exact location of the leak. OV-104 is scheduled to be launched for the STS-38 mission, a classified Department of Defense (DOD) flight. View provided by KSC with alternate number KSC-90PC-988.
Technicians complete foaming around Atlantis', OV-104, 17' ET feed line
NASA Technical Reports Server (NTRS)
1990-01-01
Technicians complete foaming around the area of Atlantis, Orbiter Vehicle (OV) 104, 17 inch diameter external tank (ET) feed line in preparation for the second liquid hydrogen tanking test at the Kennedy Space Center (KSC). An elaborate network of sensors, leak detectors, and baggies were set up on OV-104 by technicians. Engineers hope this extra instrumentation will help pinpoint the exact location of the leak. OV-104 is scheduled to be launched for the STS-38 mission, a classified Department of Defense (DOD) flight. View provided by KSC with alternate number KSC-90PC-988.
An Integration of Math with Auto Technician Courses
ERIC Educational Resources Information Center
Valenzuela, Hector
2012-01-01
This article describes the development of the contextualized math, the course design, student teaching and daily interaction with the students, and the implementation aspects of the research project designed to develop contextualized mathematics and integrate it into the Auto Technician courses. The applied math curriculum was integrated into…
Illinois Occupational Skill Standards. Collision Repair Technician Cluster.
ERIC Educational Resources Information Center
Illinois Occupational Skill Standards and Credentialing Council, Carbondale.
This document, which is intended as a guide for workforce preparation program providers, details the Illinois occupational skill standards for programs preparing students for employment in occupations in the (vehicle) collision repair technician cluster. It begins with a brief overview of the Illinois perspective on occupational skill standards…
ERIC Educational Resources Information Center
Center for Occupational Research and Development, Inc., Waco, TX.
This program planning guide for a two-year postsecondary radiation protection technician program is designed for use with courses 17-22 of thirty-five included in the Nuclear Technology Series. The purpose of the guide is to describe the nuclear power field and its job categories for specialists, technicians, and operators; and to assist planners,…
STS-32 MS Dunbar looks on as technicians prepare LES equipment in white room
NASA Technical Reports Server (NTRS)
1990-01-01
STS-32 Mission Specialist (MS) Bonnie J. Dunbar, wearing launch and entry suit (LES), looks on as technicians prepare LES equipment in the white room on the orbiter access arm at Kennedy Space Center (KSC) Launch Complex (LC) Pad 39A before entering Columbia, Orbiter Vehicle (OV) 102. In the background, a technician looks through OV-102 side hatch.
ERIC Educational Resources Information Center
Pennsylvania State Dept. of Education, Harrisburg. Bureau of Vocational and Technical Education.
This catalog lists and describes the tasks performed by a laser technician and standards for their performance. Each duty contains performance objectives for related tasks. Included in the objectives are standards that must be met and conditions for performance of the tasks. Performance guides provided for each objective identify the conditions…
Code of Federal Regulations, 2010 CFR
2010-04-01
... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Is a National Guard civilian technician... a National Guard civilian technician considered a State or Federal employee for purposes of USERRA? A National Guard civilian technician is considered a State employee for USERRA purposes, although he...
Solvent exposure and cognitive function in automotive technicians.
Bates, Michael N; Reed, Bruce R; Liu, Sa; Eisen, Ellen A; Hammond, S Katharine
2016-12-01
Automotive technicians are commonly exposed to organic and chlorinated solvents, particularly through use of cleaning products. Occupational solvent exposures have been associated with deficits in cognitive function but, to our knowledge, no previous studies have investigated automotive technicians. The purpose of the present study was to investigate whether previous exposures to n-hexane, in particular, or general solvents posed a persistent neurotoxic hazard to automotive workers. Enrolled in the study were 830 San Francisco Bay Area automotive repair workers. Each participant underwent a battery of cognitive function tests to investigate central nervous system impairment, with a primary focus on the domains of psychomotor speed, fine motor function, memory and mood. Cognitive test results regressed against estimated hexane and total solvent exposures showed little evidence of associations. Exposures to both solvents and hexane were well below the occupational exposure limits. Our results provide some reassurance about persistent neuropsychological effects in automotive workers who use solvent-based products and those who previously used hexane-containing automotive cleaning products, since this solvent is believed no longer to be used in automotive cleaning products. The lack of observed effect in this study may be attributable to low exposures, or it may reflect improved cognitive function since hexane use in automotive cleaning products was discontinued. However, impacts on results of exposure misclassification and/or the healthy worker survivor effect cannot be discounted. Irrespective of the outcome of this study, the main known neurologic effect of n-hexane is peripheral neuropathy, and such an association in automotive technicians is not excluded by these results. Copyright © 2016 Elsevier B.V. All rights reserved.
Haryu, Etsuko; Zhao, Lihua
2007-10-01
Do non-native speakers of the Japanese language understand the symbolic values of Japanese onomatopoeia matching a voiced/unvoiced consonant with a big/small sound made by a big/small object? In three experiments, participants who were native speakers of Japanese, Japanese-learning Chinese, or Chinese without knowledge of the Japanese language were shown two pictures. One picture was of a small object making a small sound, such as a small vase being broken, and the other was of a big object making a big sound, such as a big vase being broken. Participants were presented with two novel onomatopoetic words with voicing contrasts, e.g.,/dachan/vs./tachan/, and were told that each word corresponded to one of the two pictures. They were then asked to match the words to the corresponding pictures. Chinese without knowledge of Japanese performed only at chance level, whereas Japanese and Japanese-learning Chinese successfully matched a voiced/unvoiced consonant with a big/small object respectively. The results suggest that the key to understanding the symbolic values of voicing contrasts in Japanese onomatopoeia is some basic knowledge that is intrinsic to the Japanese language.
ERIC Educational Resources Information Center
Ballinger, Jack T.; Wolf, Lawrence J.
This study guide is part of an interdisciplinary program of studies entitled the Science and Engineering Technician (SET) Curriculum. This curriculum integrates elements from the disciplines of chemistry, physics, mathematics, mechanical technology, and electronic technology with the objective of training technicians in the use of electronic…
Where are the future transit maintenance technicians coming from?
DOT National Transportation Integrated Search
2001-01-01
This report identifies and addresses many of the key factors that affect the transit maintenance technicians of today and the issues that affect their employment. Researchers assigned to this project used information and research from census data and...
10 CFR 50.120 - Training and qualification of nuclear power plant personnel.
Code of Federal Regulations, 2010 CFR
2010-01-01
...) Mechanical maintenance personnel. (vii) Radiological protection technician. (viii) Chemistry technician. (ix) Engineering support personnel. (3) The training program must incorporate the instructional requirements...
10 CFR 50.120 - Training and qualification of nuclear power plant personnel.
Code of Federal Regulations, 2014 CFR
2014-01-01
...) Mechanical maintenance personnel. (vii) Radiological protection technician. (viii) Chemistry technician. (ix) Engineering support personnel. (3) The training program must incorporate the instructional requirements...
10 CFR 50.120 - Training and qualification of nuclear power plant personnel.
Code of Federal Regulations, 2011 CFR
2011-01-01
...) Mechanical maintenance personnel. (vii) Radiological protection technician. (viii) Chemistry technician. (ix) Engineering support personnel. (3) The training program must incorporate the instructional requirements...
2003-09-03
KENNEDY SPACE CENTER, FLA. - Technicians in the Space Station Processing Facility work on a Multi-Element Integrated Test (MEIT) of the U.S. Node 2 and the Japanese Experiment Module (JEM). Node 2 attaches to the end of the U.S. Lab on the ISS and provides attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, eventually, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS. The JEM, developed by the National Space Development Agency of Japan (NASDA), is Japan's primary contribution to the Station. It will enhance the unique research capabilities of the orbiting complex by providing an additional environment for astronauts to conduct science experiments.
A Secondary/Postsecondary Program to Prepare Master Technicians.
ERIC Educational Resources Information Center
Phillips, Cecil G., Jr.; Kuchinsky, Charlotte A.
A description is provided of the "Secondary/Postsecondary Program to Prepare Master Technicians," a state-funded pilot project designed to develop a "2 + 2" model in the field of electronics/electromechanical technology. Section I provides an overview of the project, a copy of the project agreement, lists of local education…
Students as Technicians: Screening Newborns for Cystic Fibrosis
ERIC Educational Resources Information Center
Gusky, Sharon
2014-01-01
In this activity, freshman college students learn biotechnology techniques while playing the role of a laboratory technician. They perform simulations of three diagnostic tests used to screen newborns for cystic fibrosis. By performing an ELISA, a PCR analysis, and a conductivity test, students learn how biotechnology techniques can be used to…
The Japanese Mind: Understanding Contemporary Japanese Culture.
ERIC Educational Resources Information Center
Davies, Roger J., Ed.; Ikeno, Osamu, Ed.
This collection of essays offers an overview of contemporary Japanese culture, and can serve as a resource for classes studying Japan. The 28 essays offer an informative, accessible look at the values, attitudes, behavior patterns, and communication styles of modern Japan from the unique perspective of the Japanese people. Filled with examples…
ERIC Educational Resources Information Center
Lindberg, Andrew; Bay, Robert
This study guide is part of a program of studies entitled Science and Engineering Technician (SET) Curriculum. The SET Curriculum integrates elements from the disciplines of chemistry, physics, mathematics, mechanical technology, and electronic technology with the objective of training technicians in the use of electronic instruments and their…
El-Helaly, Mohamed; Balkhy, Hanan H; Vallenius, Laura
2017-11-25
Work-related carpal tunnel syndrome (CTS) has been reported in different occupations, including laboratory technicians, so this study was carried out to determine the prevalence and the associated personal and ergonomic factors for CTS among laboratory technicians. A cross-sectional study was conducted among 279 laboratory technicians at King Fahd Hospital, Saudi Arabia, who filled in a self-administered questionnaire, including questions regarding their demographic criteria, occupational history, job tasks, workplace tools, ergonomic factors at work, and symptoms suggestive of CTS. Physical examinations and electrodiagnostic studies were carried out for those who had symptoms suggestive of CTS to confirm the diagnosis. Univariate and multivariate analysis were performed for both personal and physical factors in association with confirmed CTS among laboratory technicians. The prevalence of CTS among the laboratory technicians was 9.7% (27/279). The following were the statistically significant risk factors for CTS among them: gender (all cases of CTS were female, P=0.00), arm/hand exertion (OR: 7.96; 95% CI: 1.84-34.33), pipetting (OR: 7.27; 95% CI: 3.15-16.78), repetitive tasks (OR: 4.60; 95% CI: 1.39-15.70), using unadjustable chairs or desks (OR: 3.35; 95% CI: 1.23-9.15), and working with a biosafety cabinet (OR: 2.49; 95% CI: 1.11-5.59). CTS cases had significant longer work duration (17.9 ± 5.6 years) than CTS non-case (11.5 ± 7.4 yeas) with low OR (1.108). This study demonstrates some personal and ergonomic factors associated with CTS among the laboratory technicians, including female gender, arm/hand exertion, pipetting, repetitive tasks, working with a biosafety cabinet, and an unadjusted workstation.
National Apprenticeship and Training Standards for Dental Technicians. Revised.
ERIC Educational Resources Information Center
Employment and Training Administration (DOL), Washington, DC. Bureau of Apprenticeship and Training.
These national standards contain information for establishing and operating effective apprenticeship programs for dental technicians. Included in the volume are the following: definitions; provisions of the standards (equal opportunity in apprenticeship; terms of apprenticeship; apprenticeship agreements; ratios of apprentices to dental…
ERIC Educational Resources Information Center
Craig, Jerry; Stapleton, Jerry
This study guide is part of a program of studies entitled Science and Engineering Technician (SET) Curriculum. The SET Curriculum was developed for the purpose of training technicians in the use of electronic instruments and their applications. It integrates elements from the disciplines of chemistry, physics, mathematics, mechanical technology,…
ERIC Educational Resources Information Center
Ballinger, Jack T.; Wolf, Lawrence J.
This study guide is part of a program of studies entitled the Science and Engineering Technician (SET) Curriculum developed to provide a framework for training technicians in the use of electronic instruments and their applications. This interdisciplinary course of study integrates elements from the disciplines of chemistry, physics, mathematics,…
Illinois Occupational Skill Standards: Agricultural Machinery Service Technician.
ERIC Educational Resources Information Center
Illinois Occupational Skill Standards and Credentialing Council, Carbondale.
These Illinois skill standards for agriculture machinery service technician are intended to serve as a guide to workforce preparation program providers as they define content for their programs and to employers as they establish the skills and standards necessary for job acquisition. They could also serve as a mechanism for communication among…
What Is Business Japanese? Designing a Japanese Course for Business Communication.
ERIC Educational Resources Information Center
Koike, Shohei
Experiences in developing "Business Japanese" courses for the undergraduate major in Language and International Trade at Eastern Michigan University are described. In 1987, six new courses in Japanese were proposed so that Japanese could be offered as a language specialty in the program. Issues considered in defining business Japanese…
Williams, John Kino Yamaguchi; Else, 'Iwalani R. N.; Goebert, Deborah A.; Nishimura, Stephanie T.; Hishinuma, Earl S.; Andrade, Naleen N.
2013-01-01
Few studies have examined the effect of ethnicity and cultural identity on substance use among Asian and Pacific Islander adolescents. A cross-sequential study conducted in Hawai'i with 144 Japanese American and part-Japanese American adolescents assessed a model integrating Japanese ethnicity, cultural identity, substance use, major life events, and social support. Japanese American adolescents scored higher on the Japanese Culture Scale and on the Peers’ Social Support than the part-Japanese American adolescents. Significant associations for substance use and impairment included culturally intensified events and Japanese cultural identity- behavior subset. Models had good overall fits and suggested that conflict surrounding cultural identity may contribute to substance use. PMID:23480213
Siden, Rivka; Tamer, Helen R; Skyles, Amy J; Dolan, Christopher S; Propes, Denise J; Redic, Kimberly
2014-11-01
Results of a survey assessing trends and innovations in the use of pharmacy technicians and other nonpharmacist staff in the research pharmacy setting are reported. A Web-based survey was distributed to Internet communities of members of the American Society of Health-System Pharmacists and the University Health-System Consortium involved in investigational drug research and related practice areas. The survey collected data on the characteristics of institutions with pharmacy department staff dedicated to such research activities and the participation of pharmacists, technicians, and other staff in key areas of research pharmacy operations. Survey responses from 51 institutions were included in the data analysis. Overall, the reported distribution of assigned responsibility for most evaluated research pharmacy tasks reflected traditional divisions of pharmacist and technician duties, with technicians performing tasks subject to a pharmacist check or pharmacists completing tasks alone. However, some institutions reported allowing technicians to perform a number of key tasks without direct pharmacist supervision, primarily in the areas of inventory management and sponsor monitoring and auditing; almost half of the surveyed institutions reported technician involvement in teaching activities. In general, the reported use of "tech-check-tech" arrangements in research pharmacies was very limited. Some responding institutions reported the innovative use of nonpharmacist staff (e.g., paid interns, students and residents on rotation). Although the majority of research pharmacy tasks related to direct patient care are performed by or under the direct supervision of pharmacists, a variety of other essential tasks are typically assigned to pharmacy technicians and other nonpharmacist staff. Copyright © 2014 by the American Society of Health-System Pharmacists, Inc. All rights reserved.
Technician checks the mirrors of the Starshine-2 experiment
NASA Technical Reports Server (NTRS)
2001-01-01
Technician checks the mirrors of the Starshine-2 experiment KSC-01PD-1715 KENNEDY SPACE CENTER, Fla. -- A technician checks the mirrors on the Starshine-2 experiment inside a canister in the payload bay of Space Shuttle Endeavour. The deployable experiment is being carried on mission STS-108. Starshine-2's 800 aluminum mirrors were polished by more than 25,000 students from 26 countries. Top priorities for the STS-108 (UF-1) mission of Endeavour are rotation of the International Space Station Expedition Three and Expedition Four crews, bringing water, equipment and supplies to the station in the Multi-Purpose Logistics Module Raffaello, and completion of robotics tasks and a spacewalk to install thermal blankets over two pieces of equipment at the bases of the Space Station's solar wings. Liftoff of Endeavour on mission STS-108 is scheduled for 7:41 p.m. EST.
KSC technicians on team to modify X-34
NASA Technical Reports Server (NTRS)
1999-01-01
The modified X-34, known as A-1A, rests in the background of the Dryden Flight Research Center at Edwards Air Force Base, Calif., while an integrated team of KSC, Dryden Flight Research Center and Orbital Sciences Corporation engineers and technicians bring the X-34 A-1A vehicle closer to test flight readiness. Since September, eight NASA engineering technicians from KSC's Engineering Prototype Lab have assisted in the complex process of converting the X-34 A-1 vehicle from captive carry status to unpowered flight status, the A-1A. The X-34 is 58.3 feet long, 27.7 feet wide from wing tip to wing tip, and 11.5 feet tall from the bottom of the fuselage to the top of the tail. The autonomously operated technology demonstrator will be air- launched from an L-1011 airplane and should be capable of flying eight times the speed of sound, reaching an altitude of 250,000 feet. The X-34 Project is managed by NASA's Marshall Space Flight Center in Huntsville, Ala.
El-Helaly, Mohamed; Balkhy, Hanan H.; Vallenius, Laura
2017-01-01
Objectives: Work-related carpal tunnel syndrome (CTS) has been reported in different occupations, including laboratory technicians, so this study was carried out to determine the prevalence and the associated personal and ergonomic factors for CTS among laboratory technicians. Methods: A cross-sectional study was conducted among 279 laboratory technicians at King Fahd Hospital, Saudi Arabia, who filled in a self-administered questionnaire, including questions regarding their demographic criteria, occupational history, job tasks, workplace tools, ergonomic factors at work, and symptoms suggestive of CTS. Physical examinations and electrodiagnostic studies were carried out for those who had symptoms suggestive of CTS to confirm the diagnosis. Univariate and multivariate analysis were performed for both personal and physical factors in association with confirmed CTS among laboratory technicians. Results: The prevalence of CTS among the laboratory technicians was 9.7% (27/279). The following were the statistically significant risk factors for CTS among them: gender (all cases of CTS were female, P=0.00), arm/hand exertion (OR: 7.96; 95% CI: 1.84-34.33), pipetting (OR: 7.27; 95% CI: 3.15-16.78), repetitive tasks (OR: 4.60; 95% CI: 1.39-15.70), using unadjustable chairs or desks (OR: 3.35; 95% CI: 1.23-9.15), and working with a biosafety cabinet (OR: 2.49; 95% CI: 1.11-5.59). CTS cases had significant longer work duration (17.9 ± 5.6 years) than CTS non-case (11.5 ± 7.4 yeas) with low OR (1.108). Conclusion: This study demonstrates some personal and ergonomic factors associated with CTS among the laboratory technicians, including female gender, arm/hand exertion, pipetting, repetitive tasks, working with a biosafety cabinet, and an unadjusted workstation. PMID:28855446
Emergency medical technician-basic : national standard curriculum (instructor's course guide)
DOT National Transportation Integrated Search
1994-01-01
The curriculum, Emergency Medical Technician-Basic: National Standard Curriculum, : is the cornerstone of EMS prehospital training. Presented here is the : instructor's guide. This new curriculum parallels the recommendations of the : National EMS Ed...
Results of the 2015 National Certified Pharmacy Technician Workforce Survey.
Desselle, Shane P; Holmes, Erin R
2017-07-01
The results of the 2015 National Certified Pharmacy Technician Workforce Survey are described. A survey was e-mailed to a randomized sample of 5,000 certified pharmacy technicians (CPhTs) throughout the United States, with response reminders employed. Survey items eliciting demographic and work characteristics and work life attitudes were generated from the literature and qualitative interviews. This study aimed to describe job satisfaction, sources of stress, profession and employer commitment, education and training, and reasons for entry into the profession among CPhTs and determine relationships between those variables and CPhTs' level of involvement in various work activities, with particular attention paid to differences in practice setting. Frequency statistics, correlation analysis, and means testing were used to meet study objectives and identify significant differences. A total of 516 CPhTs currently working as a pharmacy technician responded to the survey. The CPhTs reported high levels of involvement in more traditional activities but less involvement in those that involve greater cognitive load. Respondents reported moderate levels of job satisfaction and commitment and somewhat high levels of stress overall. Most CPhTs chose to be a pharmacy technician because they desired to enter a healthcare field and help people and were recruited. CPhTs derived benefit from all aspects of education and training evaluated and most from on-the-job training. Perceived value of education and training was associated with higher satisfaction and commitment and with lower stress. There were a number of differences in these work life attitudes across practice settings and by involvement in various job functions. The results of the survey indicated that job satisfaction and commitment were moderate and that stress levels were somewhat high among CPhTs. There were a number of differences in work life attitudes across practice settings and by involvement in various job
Department of Defense In-House RDT&E Activities. Management Analysis Report
1987-10-30
AIRCRAFT BY NAVY PERSONNEL; ESTABLISH HUMAN TOLERANCE LIMITS FOR THESE FORCES, DEVELOP PREVENTIVE AND THERAPEUTIC METHODS TO PROTECT PERSONNEL FROM...Engineering 436 Plant Protection and 830 Mechanical Engineering Quarantine 840 Nuclear Engineering 437 Horticulture S50 Electrical Engineering 440...Technician 648 Therapeutic Radiological 1311 Physical Science Technologist Technician 649 Medical Machine Technician 1316 Hydraulic Technician 650 Medical
ASE Program Certification Standards for Automobile Technician Training Programs.
ERIC Educational Resources Information Center
National Automotive Technicians Education Foundation, Herndon, VA.
This document presents and explains the development and application of the National Institute for Automotive Service Excellence (ASE) program certification standards that were developed to improve the quality of secondary- and postsecondary-level automobile technician training by implementing a certification program that certifies programs in…
National Apprenticeship and Training Standards for Dental Technicians. Revised.
ERIC Educational Resources Information Center
National Association of Dental Labs., Inc., Washington, DC.
The guidebook presents a systematic and uniform method for training dental technicians throughout the industry, incorporating basic standards recommended by the Bureau of Apprenticeship and Training. The first section defines terminology and establishes rules and regulations regarding apprentices and apprenticeship programs in 16 areas, including…
DOE Office of Scientific and Technical Information (OSTI.GOV)
Teshima, Teruki; Numasaki, Hodaka; Shibuya, Hitoshi
2008-09-01
Purpose: To evaluate the structure of radiation oncology in Japan in terms of equipment, personnel, patient load, and geographic distribution to identify and improve any deficiencies. Methods and Materials: A questionnaire-based national structure survey was conducted between March 2006 and February 2007 by the Japanese Society of Therapeutic Radiology and Oncology. These data were analyzed in terms of the institutional stratification of the Patterns of Care Study. Results: The total numbers of new cancer patients and total cancer patients (new and repeat) treated with radiotherapy in 2005 were estimated at approximately 162,000 and 198,000, respectively. In actual use were 765more » linear accelerators, 11 telecobalt machines, 48 GammaKnife machines, 64 {sup 60}Co remote-controlled after-loading systems, and 119 {sup 192}Ir remote-controlled after-loading systems. The linear accelerator systems used dual-energy function in 498 systems (65%), three-dimensional conformal radiotherapy in 462 (60%), and intensity-modulated radiotherapy in 170 (22%). There were 426 Japanese Society of Therapeutic Radiology and Oncology-certified radiation oncologists, 774 full-time equivalent radiation oncologists, 117 medical physicists, and 1,635 radiation therapists. Geographically, a significant variation was found in the use of radiotherapy, from 0.9 to 2.1 patients/1,000 population. The annual patient load/FTE radiation oncologist was 247, exceeding the Blue Book guidelines level. Patterns of Care Study stratification can clearly discriminate the maturity of structures according to their academic nature and caseload. Conclusions: The Japanese structure has clearly improved during the past 15 years in terms of equipment and its use, although the shortage of manpower and variations in maturity disclosed by this Patterns of Care Study stratification remain problematic. These constitute the targets for nationwide improvement in quality assurance and quality control.« less
Yamazaki, Naoya; Kiyohara, Yoshio; Uhara, Hisashi; Uehara, Jiro; Fujimoto, Manabu; Takenouchi, Tatsuya; Otsuka, Masaki; Uchi, Hiroshi; Ihn, Hironobu; Minami, Hironobu
2017-06-01
Treating advanced or recurrent melanoma remains a challenge. Cancer cells can evade the immune system by blocking T-cell activation through overexpression of the inhibitory receptor programmed death 1 (PD-1) ligands. The PD-1 inhibitor nivolumab blocks the inhibitory signal in T cells, thus overcoming the immune resistance of cancer cells. Nivolumab has shown promising anticancer activity in various cancers. We carried out a single-arm, open-label, multicenter, phase II study to investigate the efficacy and safety of nivolumab in previously untreated Japanese patients with advanced melanoma. Twenty-four patients with stage III/IV or recurrent melanoma were enrolled and received i.v. nivolumab 3 mg/kg every 2 weeks until disease progression or unacceptable toxicity. The primary endpoint was overall response rate evaluated by an independent radiology review committee. The independent radiology review committee-assessed overall response rate was 34.8% (90% confidence interval, 20.8-51.9), and the overall survival rate at 18 months was 56.5% (90% confidence interval, 38.0-71.4). Treatment-related adverse events (AEs) of grade 3 or 4 only occurred in three patients (12.5%). Two patients discontinued nivolumab because of AEs, but all AEs were considered manageable by early diagnosis and appropriate treatment. Subgroup analyses showed that nivolumab was clinically beneficial and tolerable regardless of BRAF genotype, and that patients with treatment-related select AEs and with vitiligo showed tendency for better survival. In conclusion, nivolumab showed favorable efficacy and safety profiles in Japanese patients with advanced or recurrent melanoma, with or without BRAF mutations. (Trial registration no. JapicCTI-142533.). © 2017 The Authors. Cancer Science published by John Wiley & Sons Australia, Ltd on behalf of Japanese Cancer Association.
Bionetics Company technician preparing to remove rats from shipping container
NASA Technical Reports Server (NTRS)
1985-01-01
A Bionetics Company technician in Hanger L at Cape Canaveral Air Force Station, is preparing to remove 5 rats from their shipping container. They will fly aboard the shuttle Challenger in the Spacelab module.
Robinson, Emma; Titov, Nickolai; Andrews, Gavin; McIntyre, Karen; Schwencke, Genevieve; Solley, Karen
2010-06-03
Internet-based cognitive behavioural therapy (iCBT) for generalized anxiety disorder (GAD) has been shown to be effective when guided by a clinician. The present study sought to replicate this finding, and determine whether support from a technician is as effective as guidance from a clinician. Randomized controlled non-inferiority trial comparing three groups: Clinician-assisted vs. technician-assisted vs. delayed treatment. Community-based volunteers applied to the VirtualClinic (www.virtualclinic.org.au) research program and 150 participants with GAD were randomized. Participants in the clinician- and technician-assisted groups received access to an iCBT program for GAD comprising six online lessons, weekly homework assignments, and weekly supportive contact over a treatment period of 10 weeks. Participants in the clinician-assisted group also received access to a moderated online discussion forum. The main outcome measures were the Penn State Worry Questionnaire (PSWQ) and the Generalized Anxiety Disorder-7 Item (GAD-7). Completion rates were high, and both treatment groups reduced scores on the PSWQ (p<0.001) and GAD-7 (p<0.001) compared to the delayed treatment group, but did not differ from each other. Within group effect sizes on the PSWQ were 1.16 and 1.07 for the clinician- and technician-assisted groups, respectively, and on the GAD-7 were 1.55 and 1.73, respectively. At 3 month follow-up participants in both treatment groups had sustained the gains made at post-treatment. Participants in the clinician-assisted group had made further gains on the PSWQ. Approximately 81 minutes of clinician time and 75 minutes of technician time were required per participant during the 10 week treatment program. Both clinician- and technician-assisted treatment resulted in large effect sizes and clinically significant improvements comparable to those associated with face-to-face treatment, while a delayed treatment/control group did not improve. These results provide
Robinson, Emma; Titov, Nickolai; Andrews, Gavin; McIntyre, Karen; Schwencke, Genevieve; Solley, Karen
2010-01-01
Background Internet-based cognitive behavioural therapy (iCBT) for generalized anxiety disorder (GAD) has been shown to be effective when guided by a clinician. The present study sought to replicate this finding, and determine whether support from a technician is as effective as guidance from a clinician. Method Randomized controlled non-inferiority trial comparing three groups: Clinician-assisted vs. technician-assisted vs. delayed treatment. Community-based volunteers applied to the VirtualClinic (www.virtualclinic.org.au) research program and 150 participants with GAD were randomized. Participants in the clinician- and technician-assisted groups received access to an iCBT program for GAD comprising six online lessons, weekly homework assignments, and weekly supportive contact over a treatment period of 10 weeks. Participants in the clinician-assisted group also received access to a moderated online discussion forum. The main outcome measures were the Penn State Worry Questionnaire (PSWQ) and the Generalized Anxiety Disorder-7 Item (GAD-7). Completion rates were high, and both treatment groups reduced scores on the PSWQ (p<0.001) and GAD-7 (p<0.001) compared to the delayed treatment group, but did not differ from each other. Within group effect sizes on the PSWQ were 1.16 and 1.07 for the clinician- and technician-assisted groups, respectively, and on the GAD-7 were 1.55 and 1.73, respectively. At 3 month follow-up participants in both treatment groups had sustained the gains made at post-treatment. Participants in the clinician-assisted group had made further gains on the PSWQ. Approximately 81 minutes of clinician time and 75 minutes of technician time were required per participant during the 10 week treatment program. Conclusions Both clinician- and technician-assisted treatment resulted in large effect sizes and clinically significant improvements comparable to those associated with face-to-face treatment, while a delayed treatment/control group did not
Health Occupations Cluster. Secondary Curriculum Guide.
ERIC Educational Resources Information Center
Simpson, Bruce; And Others
This curriculum guide was designed for use in secondary health occupations education programs in Georgia. It provides a model for organizing vocational instructional content in health occupations, such as nurse, dental assistant, medical lab technician, radiologic technician, emergency medical technician, respiratory therapy assistant, medical…
Schoenbaum, Todd R; Chang, Yi-Yuan
2011-08-01
The cornerstone of a strong and successful dentist-technician relationship is communication. High-level collaboration across distances requires modern technology to communicate expectations, potential outcomes, and limitations. Carefully calibrated digital photography is an essential element in this inherently artistic process. This ensures a system of checks and balances to minimize the potential for miscommunication and remakes. Forthcoming technologies will allow dentist-technician teams to reach ever-greater levels of collaboration.
Technician-free system for image-guided bronchoscopy
NASA Astrophysics Data System (ADS)
Khare, Rahul; Bascom, Rebecca; Higgins, William E.
2013-03-01
Previous studies have shown that guidance systems improve accuracy and reduce skill variation among physicians during bronchoscopy. However, most of these systems suffer from one or more of the following limitations: 1) an attending technician must carefully keep the system position synchronized with the bronchoscope position during the procedure; 2) extra bronchoscope tracking hardware may be required; 3) guidance cannot take place in real time; 4) the guidance system is unable to detect and correct faulty bronchoscope maneuvers; and 5) a resynchronization procedure must be followed after adverse events such as patient cough or dynamic airway collapse. Here, we propose an image-based system for technician-free bronchoscopy guidance that relies on two features. First, our system precomputes a guidance plan that suggests natural bronchoscope maneuvers at every bifurcation leading toward a region of interest (ROI). Second, our system enables bronchoscope position verification that relies on a global-registration algorithm to establish the global bronchoscope position and, thus, provide the physician with updated navigational information during bronchoscopy. The system can handle general navigation to an ROI, as well as adverse events, and is directly controlled by the physician by a foot pedal. Guided bronchoscopy results using airway-tree phantoms and human cases demonstrate the efficacy of the system.
DOD Recovery personnel and NASA technicians inspect Friendship 7 spacecraft
NASA Technical Reports Server (NTRS)
1964-01-01
Department of Defense Recovery personnel and spacecraft technicians from NASA adn McDonnell Aircraft Corp., inspect Astronaut John Glenn's Mercury spacecraft, Friendship 7, following its return to Cape Canaveral after recovery in the Atlantic Ocean.
Pisupati, Radhika; Nerenberg, Steven F.
2016-01-01
Purpose: The purpose of this study is to determine the accuracy of a pharmacy technician–collected medication history pilot program in the emergency department. This was completed by reviewing all elements of the technician activity by direct observation and by verifying the technician-collected medication list through a second phone call by a pharmacist to the outpatient pharmacy. Methods: This was a retrospective, single-center study conducted from March to April 2015. Four certified pharmacy technicians were trained by a postgraduate year 1 (PGY1) pharmacy practice resident on how to collect, verify, and accurately enter medication histories into the electronic medical record. Accuracy of pharmacy technician–collected medication histories was verified by a pharmacist through observation of their patient interviews, review of technician-completed medication history forms, and by contacting the patient's outpatient pharmacy. Results: The pharmacy technician–completed medication histories resulted in an absolute risk reduction of errors of 50% and a relative risk reduction of errors of 77% (p < .001) in comparison to medication histories collected by non-pharmacy personnel. Conclusion: With high accuracy rates, pharmacy technicians proved to be a valuable asset to the medication history process and can enhance patient safety during care transitions. The results of this study further support the Pharmacy Practice Model Initiative vision to advance the pharmacy technician role to improve the process of medication history taking and reconciliation within the health care system. PMID:27303094
ASE Program Certification Standards for Automobile Technician Training Programs.
ERIC Educational Resources Information Center
National Automotive Technicians Education Foundation, Herndon, VA.
This publication provides the evaluation policies, procedures, and standards to which an automobile technician training program must adhere to be granted certification by the National Institute for Automotive Service Excellence. The policies section has three parts: the automobile areas that may be certified and minimum requirements for…
Technician Training for the Semiconductor Microdevices Industry. Final Report.
ERIC Educational Resources Information Center
Center for Occupational Research and Development, Inc., Waco, TX.
The Center for Occupational Research and Development (CORD) carried out four activities to foster semiconductor manufacturing technician (SMT) training: (1) collaboration with industry experts and educators while developing a curriculum to train SMTs; (2) implementation and testing of the curriculum at a technical college; (3) dissemination of…
Essentials of an Acceptable School for Medical Record Technicians.
ERIC Educational Resources Information Center
American Medical Association, Chicago, IL. Council on Medical Education.
The Council on Medical Education of the American Medical Association in collaboration with the American Association of Medical Record Librarians establishes standards for medical record technician education, surveys and approves educational programs, and publishes lists of approved programs. The standards presented are intended as a guide for…
Curriculum for Energy Use and Conservation Technicians. Final Report.
ERIC Educational Resources Information Center
Hull Daniel M.
A project designed a national curriculum model for Energy Conservation-and-Use Technicians (ECUTs) and developed and tested instructional materials for use in the courses. The two-year postsecondary ECUT curriculum was designed to provide an interdisciplinary technical base (electrical, mechanical, thermal, and fluidal principles) and technical…
Hazardous Materials Technician. Technical Committee on Occupational Curriculum Development.
ERIC Educational Resources Information Center
Northern Montana Coll., Havre. Montana Center for Vocational Education, Research, Curriculum and Personnel Development.
This document describes Montana's postsecondary curriculum to prepare hazardous materials technicians. Basic general education requirements are described. The technical skills and the knowledge associated with each are listed in the following categories: (1) site assessment; (2) sampling materials; (3) handling materials; (4) recording data; (5)…
National Apprenticeship and Training Standards for Emergency Medical Technicians.
ERIC Educational Resources Information Center
Employment and Training Administration (DOL), Washington, DC.
Developed jointly by several professional organizations and government agencies, these national standards depict the essential skills, knowledge, and ability required of certified emergency medical technicians (EMT) to provide optimal prehospital care and transportation to the sick and injured. Topics covered include definitions of terms EMT's…
Homogamy and Intermarriage of Japanese and Japanese Americans with Whites Surrounding World War II
ERIC Educational Resources Information Center
Ono, Hiromi; Berg, Justin
2010-01-01
Although some sociologists have suggested that Japanese Americans quickly assimilated into mainstream America, scholars of Japanese America have highlighted the heightened exclusion that the group experienced. This study tracked historical shifts in the exclusion level of Japanese and Japanese Americans in the United States surrounding World War…
Dental technician pneumoconiosis mimicking lung cancer.
Uyar, Meral; Sokucu, Oral; Sanli, Maruf; Filiz, Ayten; Ali Ikidag, Mehmet; Feridun Isik, Ahmet; Bakir, Kemal
2015-09-01
A 47-year-old man was referred for assessment of bilateral lymph node enlargement identified on a routine chest radiograph. Positron emission tomography showed high standardized uptake values (SUVmax: 20.5) in right supraclavicular, right intercostal, and multiple mediastinal lymph nodes. Biopsy samples obtained from the right upper and left lower paratracheal nodes by mediastinoscopy revealed granulomatous inflammation. Clinical and laboratory findings indicated a diagnosis of dental technician pneumoconiosis. The patient is alive and well 3 years after diagnosis. This case highlights the importance of obtaining an occupational history.
ERIC Educational Resources Information Center
Mowery, Donald R.
This study guide is part of a program of studies entitled the Science and Engineering Technician (SET) Curriculum developed for the purpose of training technicians in the use of electronic instruments and their applications. The program integrates elements from the disciplines of chemistry, physics, mathematics, mechanical technology, and…
A technician-delivered 'virtual clinic' for triaging low-risk glaucoma referrals.
Kotecha, A; Brookes, J; Foster, P J
2017-06-01
PurposeThe purpose of this study is to describe the outcomes of a technician-delivered glaucoma referral triaging service with 'virtual review' of resultant data by a consultant ophthalmologist.Patients and methodsThe Glaucoma Screening Clinic reviewed new optometrist or GP-initiated glaucoma suspect referrals into a specialist ophthalmic hospital. Patients underwent testing by three ophthalmic technicians in a dedicated clinical facility. Data were reviewed at a different time and date by a consultant glaucoma ophthalmologist. Approximately 10% of discharged patients were reviewed in a face-to-face consultant-led clinic to examine the false-negative rate of the service.ResultsBetween 1 March 2014 and 31 March 2016, 1380 patients were seen in the clinic. The number of patients discharged following consultant virtual review was 855 (62%). The positive predictive value of onward referrals was 84%. Three of the 82 patients brought back for face-to-face review were deemed to require treatment, equating to negative predictive value of 96%.ConclusionsOur technician-delivered glaucoma referral triaging clinic incorporates consultant 'virtual review' to provide a service model that significantly reduces the number of onward referrals into the glaucoma outpatient department. This model may be an alternative to departments where there are difficulties in implementing optometrist-led community-based referral refinement schemes.
24 CFR 291.530 - Eligible firefighter/emergency medical technicians.
Code of Federal Regulations, 2012 CFR
2012-04-01
... 24 Housing and Urban Development 2 2012-04-01 2012-04-01 false Eligible firefighter/emergency medical technicians. 291.530 Section 291.530 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued) OFFICE OF ASSISTANT SECRETARY FOR HOUSING-FEDERAL HOUSING COMMISSIONER, DEPARTMENT OF HOUSING AND URBAN...
24 CFR 291.530 - Eligible firefighter/emergency medical technicians.
Code of Federal Regulations, 2013 CFR
2013-04-01
... 24 Housing and Urban Development 2 2013-04-01 2013-04-01 false Eligible firefighter/emergency medical technicians. 291.530 Section 291.530 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued) OFFICE OF ASSISTANT SECRETARY FOR HOUSING-FEDERAL HOUSING COMMISSIONER, DEPARTMENT OF HOUSING AND URBAN...
24 CFR 291.530 - Eligible firefighter/emergency medical technicians.
Code of Federal Regulations, 2014 CFR
2014-04-01
... 24 Housing and Urban Development 2 2014-04-01 2014-04-01 false Eligible firefighter/emergency medical technicians. 291.530 Section 291.530 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued) OFFICE OF ASSISTANT SECRETARY FOR HOUSING-FEDERAL HOUSING COMMISSIONER, DEPARTMENT OF HOUSING AND URBAN...
24 CFR 291.530 - Eligible firefighter/emergency medical technicians.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 24 Housing and Urban Development 2 2011-04-01 2011-04-01 false Eligible firefighter/emergency medical technicians. 291.530 Section 291.530 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued) OFFICE OF ASSISTANT SECRETARY FOR HOUSING-FEDERAL HOUSING COMMISSIONER, DEPARTMENT OF HOUSING AND URBAN...
The Anglo-Japanese Alliance and Japanese Expansionism 1902-1923.
1992-06-05
Alienation 1919-1952. London: Cambridge University Press. 1982. • The Oriains of the Russo-Japanese War. London: Longman Group Limited. 1985. Nitobe ... Inazo . Bushido - The Soul of Japan. Tokyo: Tuttle. 1981. Okamoto, Shumpei. The Japan Oliaarchv and the Russo-Japanese War. New York: Columbia
Interventional radiology; Diagnostic radiology; X-ray imaging ... DIAGNOSTIC RADIOLOGY Diagnostic radiology helps health care professionals see structures inside your body. Doctors that specialize in the interpretation ...
Academy of Nutrition and Dietetics: Scope of Practice for the Dietetic Technician, Registered.
2013-06-01
The Scope of Practice for the Dietetic Technician, Registered provides standards and tools to guide competence in performing nutrition and dietetics practice. Composed of statutory and individual components, the DTR's scope of practice is determined by state statute and the DTR's education, training, credentialing, and demonstrated and documented competence in practice. The Scope of Practice for the Dietetic Technician, Registered reflects the Academy's position on the DTR scope of practice and the essential technical assistance role of the DTR in providing safe timely person-centered care for the delivery of quality food and nutrition services.
ERIC Educational Resources Information Center
Williams, John Kino Yamaguchi; Goebert, Deborah; Hishinuma, Earl; Miyamoto, Robin; Anzai, Neal; Izutsu, Satoru; Yanagida, Evelyn; Nishimura, Stephanie; Andrade, Naleen; Baker, F. M.
2002-01-01
Develops and assesses a model integrating Japanese ethnicity, cultural identity, and anxiety in Japanese American and part-Japanese American high school seniors. Japanese American adolescents scored higher on the scale and reported fewer anxiety symptoms than part-Japanese American adolescents. The model had a good overall fit, suggesting that…
Greater Utilization of Dental Technicians, I. Report of Training.
ERIC Educational Resources Information Center
Ludwick, William E.; And Others
This report of one phase of a study concerned with seeking means of extending the success of dental officers through delegation of certain treatment procedures to auxiliary personnel focuses upon determining the amount of training dental assistants (termed dental technicians by the Navy) require in order to perform the treatment procedure…
Education of Technicians for Water Conservation and Wastewater Control.
ERIC Educational Resources Information Center
Brooking, Walter J.
There is a growing need for supportive personnel with technical preparation in water and wastewater purification and water resource conservation. A curriculum and program guide was developed in 1965-66 by Fayetteville Technical Institute for use by institutions interested in establishing a program to educate technicians. Meeting the need for…
Limited License Legal Technician. Washington's Community and Technical Colleges
ERIC Educational Resources Information Center
Washington State Board for Community and Technical Colleges, 2014
2014-01-01
A landmark state Supreme Court rule that promises to create new jobs and expand public access to legal help is coming to life at Washington's community and technical colleges. Four colleges--Highline, Edmonds, Tacoma, and Spokane--started training students to become "Limited License Legal Technicians" (LLLTs) in 2014. The state Supreme…
1. CHANNEL DIMENSIONS AND ALIGNMENT RESEARCH INSTRUMENTATION. ENGINEERING TECHNICIAN WITH ...
1. CHANNEL DIMENSIONS AND ALIGNMENT RESEARCH INSTRUMENTATION. ENGINEERING TECHNICIAN WITH VIDEO-CONTROLED MODEL BOAT IN MODEL NAVIGATION CHANNEL. NOTE CONTROL TRAILER IN BACKGROUND. - Waterways Experiment Station, Hydraulics Laboratory, Halls Ferry Road, 2 miles south of I-20, Vicksburg, Warren County, MS
Suram, Vasantha; Addepalli, Uday Kumar; Krishnaiah, Sannapaneni; Kovai, Vilas; Khanna, Rohit C
2016-03-01
There is paucity of data on the inter-observer agreement and diagnostic accuracy between a primary-care technician (vision technician) and an ophthalmologist. Hence, the current study was conducted to assess the accuracy of vision technicians, to screen potentially sight-threatening ocular conditions at rural vision centres of southern India and their agreement with an ophthalmologist. In July to August 2010, patients presenting to seven vision centres in Adilabad district (Andhra Pradesh) were selected and screened in a masked manner by seven vision technicians followed by an examination by a consultant ophthalmologist. Agreement was assessed between vision technicians and the ophthalmologist for screening of potential sight-threatening ocular conditions and decisions for referral. The ophthalmologist's findings were considered as the reference standard. Two hundred and seventy-nine patients were enrolled at seven vision centres with a mean age of 32.9 ± 21.8 years. Agreement for screening of ocular pathology was 0.82 (95 per cent CI, 0.8-0.83). There was excellent agreement for cataract (0.97; 95 per cent CI, 0.93-1), refractive error (0.98; 95 per cent CI, 0.96-1), corneal pathology (1.0; 95 per cent CI, 1.0-1.0) and other anterior segment pathology (0.95; 95 per cent CI, 0.9-1); the agreement was moderate to fair for detection of glaucoma suspects (0.43; 95 per cent CI, 0.28-0.60) and retinal pathology (0.39; 95 per cent CI, 0.14-0.63). Sensitivity for screening of anterior segment pathology was 94.6-100 per cent. There was a fair to moderate sensitivity for glaucoma suspect; 35.6 per cent (95 per cent CI, 21.9-51.2) and retinal pathology 26.3 per cent (95 per cent CI, 9.2-51.2). Specificity for screening of ocular pathology was 98.2 to 100 per cent. The kappa (κ) agreement for referral for any pathology was 0.82 (0.8-0.83) CONCLUSION: As there is good agreement between the vision technicians and the ophthalmologist for screening and referral of
Statistical Machine Translation of Japanese
2007-03-01
hiragana and katakana) syllabaries…………………….. 20 3.2 Sample Japanese sentence showing kanji and kana……………………... 21 3.5 Japanese formality example...syllabary. 19 Figure 3.1. Japanese kana syllabaries, hiragana for native Japanese words, word endings, and particles, and katakana for foreign...Figure 3.2. Simple Japanese sentence showing the use of kanji, hiragana , and katakana. Kanji is used for nouns and verb, adjective, and
ERIC Educational Resources Information Center
Isik, Nurettin; Onat, Ayhan
2004-01-01
In this study of "Occupational Survey of Refrigeration Technicians" in which the "Task Inventory Questionnaires" have been developed, we aim at determining the vocational psychomotor competencies (skills) of refrigeration technicians for effectively carrying out the occupational duties in labor-life. In the first phase of the…
Güngör, Derya; Bornstein, Marc H; De Leersnyder, Jozefien; Cote, Linda; Ceulemans, Eva; Mesquita, Batja
2013-07-01
The present study tests the hypothesis that involvement with a new culture instigates changes in personality of immigrants that result in (a) better fit with the norms of the culture of destination and (b) reduced fit with the norms of the culture of origin. Participants were 40 Japanese first-generation immigrants to the United States, 57 Japanese monoculturals, and 60 U.S. monoculturals. All participants completed the Jackson Personality Inventory (JPI) as a measure of the Big Five; immigrants completed the Japanese American Acculturation Scale. Immigrants' fits with the cultures of destination and origin were calculated by correlating Japanese American mothers' patterns of ratings on the Big Five with the average patterns of ratings of European Americans and Japanese on the same personality dimensions. Japanese Americans became more "American" and less "Japanese" in their personality as they reported higher participation in the U.S. culture. The results support the view that personality can be subject to cultural influence.
The Technician beneath Our Wings, or Is That Blades?
ERIC Educational Resources Information Center
Colony, Lee; Foster, John
2011-01-01
Today's trained technicians in alternative energy fields are finding even more career opportunities open to them as the United States and the world turn to green technology to power their homes and businesses. Wisconsin's Gateway Technical College is training workers for green collar careers in geoexchange heating and cooling systems, wind power…
Heating, Air-Conditioning, and Refrigeration Technician. National Skill Standards.
ERIC Educational Resources Information Center
Vocational Technical Education Consortium of States, Decatur, GA.
This guide contains information on the knowledge and skills identified by industry as essential to the job performance of heating, air-conditioning, and refrigeration technicians. It is intended to assist training providers in public and private institutions, as well as in industry, to develop and implement training that will provide workers with…
Information Systems Technician Rating Stakeholders: Implications for Effective Performance
2011-01-01
DeSanctis, and Borge Obel. (2006). Organizational Design: A Step-by-Step Approach. Cambridge, UK: Cambridge University Press. Carroll, G . R., and M...manpower, personnel, and training processes for managing the information systems technician (IT) rating and the effects of these different stakeholders...Strategic Human Resource Management and Management Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Organizational
5 CFR 841.708 - Special provisions affecting retired military reserve technicians.
Code of Federal Regulations, 2011 CFR
2011-01-01
... the bar against COLA increases for retirees under age 62. (b) Military reserve technicians have... disqualification was for nonmedical reasons. OPM will inform these retirees that they will not receive COLA's until...
5 CFR 841.708 - Special provisions affecting retired military reserve technicians.
Code of Federal Regulations, 2013 CFR
2013-01-01
... the bar against COLA increases for retirees under age 62. (b) Military reserve technicians have... disqualification was for nonmedical reasons. OPM will inform these retirees that they will not receive COLA's until...
5 CFR 841.708 - Special provisions affecting retired military reserve technicians.
Code of Federal Regulations, 2014 CFR
2014-01-01
... the bar against COLA increases for retirees under age 62. (b) Military reserve technicians have... disqualification was for nonmedical reasons. OPM will inform these retirees that they will not receive COLA's until...
5 CFR 841.708 - Special provisions affecting retired military reserve technicians.
Code of Federal Regulations, 2012 CFR
2012-01-01
... the bar against COLA increases for retirees under age 62. (b) Military reserve technicians have... disqualification was for nonmedical reasons. OPM will inform these retirees that they will not receive COLA's until...
Basic investigation of vascular interventional radiology (IR) using large rabbits.
Nitta, Norihisa; Sonoda, Akinaga; Nitta-Seko, Ayumi; Ohta, Shinichi; Tsuchiya, Keiko; Tanaka, Toyohiko; Kanasaki, Shuzo; Mukaisho, Kenichi; Takahashi, Masashi; Murata, Kiyoshi
2009-10-01
The purpose of this study was to determine the usefulness of large rabbits for basic vascular interventional radiology (IR) experiments. We used 5 Akita large rabbits (Akita) and 5 Japanese white rabbits (JW). We conducted measurements of vessel diameters such as the aorta, and the iliac, renal, superior mesenteric, celiac, and proper hepatic arteries, and of the growth rates of VX2 liver tumors. There were significant differences between Akita and JW in the diameters of the thoracic aorta, lower abdominal aorta, and celiac artery. In other blood vessels, no significant differences were found. There was no difference in the growth rates of the VX2 tumors between Akita and JW. The possibility that Akita large rabbits could be utilized for vascular IR was demonstrated.
DOD Recovery personnel and NASA technicians inspect Friendship 7 spacecraft
1962-02-20
S64-14861 (1962) --- Department of Defense (DOD) recovery personnel and spacecraft technicians from NASA and McDonnell Aircraft Corp., inspect astronaut John Glenn's Mercury spacecraft, Friendship 7, following its return to Cape Canaveral after recovery in the Atlantic Ocean. Photo credit: NASA
STS-45 MS Foale dons EMU with technicians' help in JSC's WETF Bldg 29
NASA Technical Reports Server (NTRS)
1991-01-01
STS-45 Atlantis, Orbiter Vehicle (OV) 104, Mission Specialist (MS) C. Michael Foale stands on a platform as technicians help him don his extravehicular mobility unit (EMU). The technicians are preparing to connect the EMU upper and lower torsos at the waist ring. When fully suited, Foale will be lowered into a nearby 25 ft deep pool for an underwater simulation of contingency extravehicular activity (EVA) procedures. The pool is located in JSC's Weightless Environment Training Facility (WETF) Bldg 29.
ERIC Educational Resources Information Center
Dixon, Peggy; And Others
This study guide is part of a program of studies entitled Science and Engineering Technician (SET) Curriculum. The SET Curriculum integrates elements from the disciplines of chemistry, physics, mathematics, mechanical technology, and electronic technology. The objective of this curriculum development project is to train technicians in the use of…
Expectations and final evaluation of complete dentures by patients, dentist and dental technician.
Marachlioglou, C R M Z; Dos Santos, J F F; Cunha, V P P; Marchini, Leonardo
2010-07-01
There is a poor association between the dentist's evaluation of denture quality and patients' satisfaction with their dentures. Possible differences between dental professionals and patients' expectations might help explain differences in outcome evaluations. This study compared scores given by a dentist, a dental technician and patients for their expectations before and their final evaluation after complete dentures treatment. Twenty completely edentulous patients, a prosthodontist and a dental technician provided scores for the expected aesthetic and functional results of their dentures based on a visual analogue scale at baseline. Post-treatment completion ratings were given after adjustments, by dentist and patients. The dental technician provided post-treatment completion ratings after completing the dentures. The patients had higher expectations than the dental technician and the dentist perceived for both aesthetic and function (P < 0.001). The patients also presented higher post-treatment completion ratings than the dental professionals perceived for final aesthetics (P = 0.016, Kendall's W = 0.207) and function (P = 0.002, Kendall's W = 0.303). Only the dentist presented a statistically significant difference between expectations (lower) and final (higher) outcomes for aesthetics (P = 0.017) and function (P = 0.003). There was no correlation between expectations and post-treatment completion ratings according to the patients' age. There was also no correlation between the patients' gender and expectation scores. Patients presented higher expectations regarding their dentures than dental professionals. The dentist believed that dentures would bring fewer benefits than patients did, but his perception of denture benefits post-treatment was significantly higher than his expectations.
What Do Technicians Do? EQW Working Papers WP17.
ERIC Educational Resources Information Center
Barley, Stephen R.
Between 1950 and 1988, the number of professional and technical workers increased by 282% while the labor force as a whole only increased by 94%. Most persons employed as technicians work on or with reputedly complex technologies. Most work at the empirical interface between a larger production process and the materials on which the process…
Two technicians apply insulation to S-II second stage
NASA Technical Reports Server (NTRS)
1964-01-01
Two technicians apply insulation to the outer surface of the S-II second stage booster for the Saturn V moon rocket. The towering 363-foot Saturn V was a multi-stage, multi-engine launch vehicle standing taller than the Statue of Liberty. Altogether, the Saturn V engines produced as much power as 85 Hoover Dams.
Cooperative educational project for optical technicians utilizing amateur telescope making
NASA Astrophysics Data System (ADS)
Williamson, Ray
2004-01-01
In the modern optical shop, technicians are typically skilled machine operators who work on only one phase of the manufacture for each and every component. The product is designed, specified, methodized, scheduled and integrated by people off the shop floor. Even at the component level, the people inside the shop usually see only one stage of completion. In an effort to make the relevance of their work visible; to demonstrate competence to their peers; to gain appreciation for the work of others; and to give them a meaningful connection with the functions of optical systems, I created "The Telescope Project" for my former employer. I invited those interested to participate in an after-hours, partially subsidized project to build telescopes for themselves. The ground-rules included that we would all make the same design (thus practicing consensus and configuration management); that we would all work on every phase (thus learning from each other); and that we would obtain our parts by random lot at the end (thus making quality assurance a personal issue). In the process the participating technicians learned about optical theory, design, tolerancing, negotiation, scheduling, purchasing, fabrication, coating and assembly. They developed an appreciation for each other's contributions and a broader perspective on the consequences of their actions. In the end, each obtained a high-quality telescope for his or her personal use. Several developed an abiding love for astronomy. The project generated much interest from technicians who didn"t initially choose to participate. In this paper I describe the project in detail.
ERIC Educational Resources Information Center
Taylor, Harvey M.
Each culture has its own nonverbal as well as its verbal language. Movements, gestures and sounds have distinct and often conflicting interpretations in different countries. For Americans communicating with Japanese, misunderstandings are of two types: Japanese behavior which is completely new to the American, and Japanese behavior which is…
Detraditionalisation: Japanese Students in the USA.
ERIC Educational Resources Information Center
Ueno, Junko
2001-01-01
Focuses on the identity formation of Japanese students temporarily living in the United States. The students were enrolled in Japanese Saturday school and in American public schools. Student interviews reveal a mixture of Japanese and American characteristics. Suggests Japanese students do not reject either culture--Japanese or American--but that…
Gibbons, Laura E; McCurry, Susan; Rhoads, Kristoffer; Masaki, Kamal; White, Lon; Borenstein, Amy R; Larson, Eric B; Crane, Paul K
2009-02-01
The Cognitive Abilities Screening Instrument (CASI) was designed for use in cross-cultural studies of Japanese and Japanese-American elderly in Japan and the U.S.A. The measurement equivalence in Japanese and English had not been confirmed in prior studies. We analyzed the 40 CASI items for differential item functioning (DIF) related to test language, as well as self-reported proficiency with written Japanese, age, and educational attainment in two large epidemiologic studies of Japanese-American elderly: the Kame Project (n=1708) and the Honolulu-Asia Aging Study (HAAS; n = 3148). DIF was present if the demographic groups differed in the probability of success on an item, after controlling for their underlying cognitive functioning ability. While seven CASI items had DIF related to language of testing in Kame (registration of one item; recall of one item; similes; judgment; repeating a phrase; reading and performing a command; and following a three-step instruction), the impact of DIF on participants' scores was minimal. Mean scores for Japanese and English speakers in Kame changed by <0.1 SD after accounting for DIF related to test language. In HAAS, insufficient numbers of participants were tested in Japanese to assess DIF related to test language. In both studies, DIF related to written Japanese proficiency, age, and educational attainment had minimal impact. To the extent that DIF could be assessed, the CASI appeared to meet the goal of measuring cognitive function equivalently in Japanese and English. Stratified data collection would be needed to confirm this conclusion. DIF assessment should be used in other studies with multiple language groups to confirm that measures function equivalently or, if not, form scores that account for DIF.
Respiratory Therapy and Respiratory Therapy Technician. Florida Vocational Program Guide.
ERIC Educational Resources Information Center
Florida State Univ., Tallahassee. Center for Instructional Development and Services.
This program guide identifies primary considerations in the organization, operation, and evaluation of respiratory therapy and respiratory therapy technician programs. An occupational description and program content are presented. The curriculum framework specifies the exact course title, course number, levels of instruction, major course content,…
Medical Laboratory Technician and Technologist Training: Arizona Heeds the Call.
ERIC Educational Resources Information Center
Biehl, Ruth B.
Arizona's medical laboratory personnel training programs were examined in relation to the nationwide development and distribution of laboratory personnel classifications (Medical Technologist--MT, Medical Laboratory Technician--MLT, and Certified Laboratory Assistant--CLA) and the national educational response which has resulted in an increase in…
Zhang, Long Jiang; Wang, Yun Fei; Yang, Zhen Lu; Schoepf, U Joseph; Xu, Jiaqian; Lu, Guang Ming; Li, Enzhong
2017-10-01
To evaluate the features and trends of Radiology research in Mainland China through bibliometric analysis of the original articles published in Radiology and European Radiology (ER) between 2006 and 2015. We reviewed the original articles published in Radiology and ER between 2006 and 2015. The following information was abstracted: imaging subspecialty, imaging technique(s) used, research type, sample size, study design, statistical analysis, study results, funding declarations, international collaborations, number of authors, department and province of the first author. All variables were examined longitudinally over time. Radiology research in Mainland China saw a substantial increase in original research articles published, especially in the last 5 years (P < 0.001). Within Mainland China's Radiology research, neuroradiology, vascular/interventional Radiology, and abdominal Radiology were the most productive fields; MR imaging was the most used modality, and a distinct geographic provenience was observed for articles published in Radiology and ER. Radiology research in Mainland China has seen substantial growth in the past 5 years with neuroradiology, vascular/interventional Radiology, and abdominal Radiology as the most productive fields. MR imaging is the most used modality. Article provenience shows a distinct geographical pattern. • Radiology research in Mainland China saw a substantial increase. • Neuroradiology, vascular/interventional Radiology, and abdominal Radiology are the most productive fields. • MRI is the most used modality in Mainland China's Radiology research. • Guangdong, Shanghai, and Beijing are the most productive provinces.
Cosmonaut Sergei Krikalev receives assistance from suit technician
NASA Technical Reports Server (NTRS)
1994-01-01
Sergei Krikalev, alternative mission specialist for STS-63, gets help from Dawn Mays, a Boeing suit technician. The cosmonaut was about to participate in a training session at JSC's Weightless Environment Training Facility (WETF). Wearing the training version of the extravehicular mobility unit (EMU) space suit, weighted to allow neutral buoyancy in the 25 feet deep WETF pool, Krikalev minutes later was underwater simulating a contingency spacewalk, or extravehicular activity (EVA).
The purpose of this SOP is to define the coding strategy for the Technician Walk-Through Questionnaire. This questionnaire was developed for use during the Arizona NHEXAS project and the "Border" study. Keywords: data; coding; technician walk-through questionnaire.
The Nationa...
The purpose of this SOP is to define the steps involved in cleaning the electronic data generated from data entry of the Technician Walk-Through Questionnaire. It applies to electronic data corresponding to the Technician Walk-Through Questionnaire that was scanned and verified ...
Ghorbanian, Azimeh; Bahadori, Mohammadkarim; Nejati, Mostafa
2012-01-01
Leadership plays a crucial role in many professions, especially in challenging positions such as emergency medical service jobs. The purpose of this study was to explore the relationship between managers' leadership styles and emergency medical technicians' job satisfaction. This is a descriptive and cross-sectional study that was carried out in 2010. The research population included 21 managers and 87 emergency medical technicians working in 23 stations in Isfahan city, Iran. The main tools used for data accumulation were the Multiple Leadership Questionnaire for evaluating leadership styles and the Job Descriptive Index for measuring job satisfaction levels. Also, the Pearson correlation analysis test was used to evaluate the relationship between leadership style and job satisfaction. Among both managers and technicians, the highest mean score related to the transformational management style, whereas the lowest mean score related to the laissez-faire management style. Moreover, a significant relationship (P<0.01) was found between the transformational and transactional leadership styles and job satisfaction. However, no significant relationship was observed between the laissez-faire management style and job satisfaction. Considering the importance of job satisfaction in medical emergencies, it is recommended that health sector policy makers should provide the groundwork for implementing the transformational leadership style to enhance job satisfaction of the medical emergency staff.
X-Ray Exam: Lower Leg (Tibia and Fibula)
... X-rays are performed by an X-ray technician in the radiology department of a hospital, a ... pregnant, inform her doctor and the X-ray technician. Procedure This is a quick procedure. Although the ...
Cooperative Demonstration Program To Train Aviation Maintenance Technicians. Final Report.
ERIC Educational Resources Information Center
Alabama Aviation and Technical Coll., Ozark.
The Alabama Aviation and Technical College, working with representatives of the aviation industry, the military, the Alabama Department of Aeronautics, and the Federal Aviation Administration, developed a training program for aviation maintenance technicians. The program also aimed to emphasize and expand opportunities for minorities, females, and…
Large Outbreak of Hepatitis C Virus Associated With Drug Diversion by a Healthcare Technician.
Alroy-Preis, Sharon; Daly, Elizabeth R; Adamski, Christine; Dionne-Odom, Jodie; Talbot, Elizabeth A; Gao, Fengxiang; Cavallo, Steffany J; Hansen, Katrina; Mahoney, Jennifer C; Metcalf, Erin; Loring, Carol; Bean, Christine; Drobeniuc, Jan; Xia, Guo-Liang; Kamili, Saleem; Montero, José T
2018-05-14
In May 2012, the New Hampshire (NH) Division of Public Health Services (DPHS) was notified of 4 persons with newly diagnosed hepatitis C virus (HCV) infection at hospital X. Initial investigation suggested a common link to the hospital cardiac catheterization laboratory (CCL) because the infected persons included 3 CCL patients and a CCL technician. NH DPHS initiated an investigation to determine the source and control the outbreak. NH DPHS conducted site visits, case patient and employee interviews, medical record and medication use review, and employee and patient HCV testing using enzyme immunoassay for anti-HCV, reverse-transcription polymerase chain reaction for HCV RNA, nonstructural 5B (NS5B) and hypervariable region 1 (HVR1) sequencing, and quasispecies analysis. HCV HVR1 analysis of the first 4 cases confirmed a common source of infection. HCV testing identified 32 of 1074 CCL patients infected with the outbreak strain, including 3 patients coinfected with >1 HCV strain. The epidemiologic investigation revealed evidence of drug diversion by the HCV-infected technician, evidenced by gaps in controlled medication control, higher fentanyl use during procedures for confirmed cases, and building card key access records documenting the presence of the technician during days when transmission occurred. The employee's status as a traveling technician led to a multistate investigation, which identified additional cases at prior employment sites. This is the largest laboratory-confirmed drug diversion-associated HCV outbreak published to date. Recommendations to reduce drug diversion risk and to conduct outbreak investigations are provided.
Japanese Encephalitis: Frequently Asked Questions
... the vaccine, what should I do? What is Japanese encephalitis? Japanese encephalitis (JE) is a potentially severe ... cause inflammation of the brain (encephalitis). Where does Japanese encephalitis occur? JE occurs in Asia and parts ...
Cullings, Harry M; Kawamura, Hisao; Chen, Jing
2012-03-01
The computational phantoms used in dosimetry system DS86 and re-used in DS02 were derived from models and methods developed at Oak Ridge National Laboratories (ORNL) in the US, but referred to Japanese anthropometric data for the Japanese population of 1945, from studies conducted at the Japanese National Institute of Radiological Sciences and other sources. The phantoms developed for DS86 were limited to three hermaphroditic models: infant, child and adult. After comparing data from Japanese and Western populations, phantoms were adapted from the pre-existing ORNL series, adjusting some organs in the adult phantom to reflect differences between Japanese and Western data, but not in the infant and child phantoms. To develop a new and larger series of more age- and sex-specific models, it appears necessary to rely on the original Japanese data and values derived from them, which can directly provide population-average body dimensions for various ages. Those data were re-analysed in conjunction with other Asian data for an Asian Reference Man model, providing a rather complete table of organ weights that could be used to scale organs for growth during childhood and adolescence. Although the resulting organ volumes might have some inaccuracies in relation to true population-average values, this is a minor concern because in the DS02 context organ size per se is less important than the correct body size and correct placement of the organ in the body.
Dental Assistants, Technicians and Hygienists. Career Focus, volume 5, no. 1.
ERIC Educational Resources Information Center
Reese, Susan
2003-01-01
Includes three articles: "Lending a Hand for Good Dental Health,""A Promising Career Path," and "Dental Laboratory Technicians." Describes careers related to the dental field and the dental programs at various career centers, community colleges, and universities. (JOW)
Communication Technician: Apprenticeship Course Outline. Apprenticeship and Industry Training. 2209
ERIC Educational Resources Information Center
Alberta Advanced Education and Technology, 2009
2009-01-01
The graduate of the Communication Technician apprenticeship program is a certified journeyperson who will be able to: (1) supervise, train and coach apprentices; (2) use a thorough knowledge of electrical and electronic theory and its application to communication and associated equipment used in the telecommunication industry; (3) understand…
Competency-Based Common-Core Curriculum for Emergency Medical Technician Education.
ERIC Educational Resources Information Center
Arizona State Board of Directors for Community Colleges, Phoenix.
This curriculum guide contains a listing of all common-core competencies that should be taught in Arizona community colleges in order to prepare students to meet the requirements of basic and refresher emergency medical technician training. Identified through a statewide project, the competencies cover the following topics: introduction to…
Güngör, Derya; Bornstein, Marc H.; De Leersnyder, Jozefien; Cote, Linda; Ceulemans, Eva; Mesquita, Batja
2013-01-01
The present study tests the hypothesis that involvement with a new culture instigates changes in personality of immigrants that result in (a) better fit with the norms of the culture of destination and (b) reduced fit with the norms of the culture of origin. Participants were 40 Japanese first-generation immigrants to the United States, 57 Japanese monoculturals, and 60 U.S. monoculturals. All participants completed the Jackson Personality Inventory (JPI) as a measure of the Big Five; immigrants completed the Japanese American Acculturation Scale. Immigrants’ fits with the cultures of destination and origin were calculated by correlating Japanese American mothers’ patterns of ratings on the Big Five with the average patterns of ratings of European Americans and Japanese on the same personality dimensions. Japanese Americans became more “American” and less “Japanese” in their personality as they reported higher participation in the U.S. culture. The results support the view that personality can be subject to cultural influence. PMID:23935211
Gemini 9 crew in spacecraft with technicians closing hatches
NASA Technical Reports Server (NTRS)
1966-01-01
Technicians prepare to close the hatches on the Gemini 9-A spacecraft in the White Room atop Pad 19 after insertion of Astronauts Thomas P. Stafford (left) and Eugene A. Cernan. Liftoff was at 8:39 a.m., June 3, 1966. Humorous sign from backup crew, James A. Lovell Jr. and Edwin E. Aldrin Jr., was taped to the spacecraft.
McFarland, Lynne V; Raugi, Gregory J; Reiber, Gayle E
2013-11-01
Assessment of a multisite rural teledermatology project between 2009 and 2012 in four Pacific Northwest states that trained primary care providers and imaging technicians in state-of-the-art techniques of telemedicine. In 2012, we assessed provider and imaging technician acceptability and satisfaction with a 32-item survey instrument based on the Patient Satisfaction Questionnaire developed by Ware et al. (Eval Program Plann 1983;6:247-63) and modified for telemedicine by Kraai et al. (J Card Fail 2011;17:684-690). Survey questions covered eight satisfaction domains: interpersonal manner, technical quality, accessibility, finances, efficacy, continuity, physical environment, and availability. Overall, 71% of the primary care providers and 94% of the imaging technicians reported being satisfied or extremely satisfied with the teledermatology project. Most (95%) providers found the continuing education classes on dermatology diagnosis and treatment topics useful, and 86% reported teledermatology was a good addition to regular patient services. Most (97%) of the imaging technicians were satisfied with the ability of teledermatology to improve the description of dermatology conditions using images of the lesions or rashes, and 91% were satisfied with the convenience of teledermatology. Challenges reported by both providers and imaging technicians include an increase in workload due to more patient visits related to dermatology care and limited information technology support. Given the Veterans Health Administration's initiatives to promote accessible health care to underserved Veterans using telehealth, these findings can inform future program designs for teledermatology.
Homogamy and Intermarriage of Japanese and Japanese Americans With Whites Surrounding World War II.
Ono, Hiromi; Berg, Justin
2010-10-01
Although some sociologists have suggested that Japanese Americans quickly assimilated into mainstream America, scholars of Japanese America have highlighted the heightened exclusion that the group experienced. This study tracked historical shifts in the exclusion level of Japanese and Japanese Americans in the United States surrounding World War II with homogamy and intermarriage with Whites for the prewar (1930-1940) and resettlement (1946-1966) marriage cohorts. The authors applied log-linear models to census microsamples (N = 1,590,416) to estimate the odds ratios of homogamy versus intermarriage. The unadjusted odds ratios of Japanese Americans declined between cohorts and appeared to be consistent with the assimilation hypothesis. Once compositional influences and educational pairing patterns were adjusted, however, the odds ratios increased and supported the heightened exclusion hypothesis.
Walsh, Kristin E; Chui, Michelle Anne; Kieser, Mara A; Williams, Staci M; Sutter, Susan L; Sutter, John G
2011-01-01
To explore community pharmacy technician workflow change after implementation of an automated robotic prescription-filling device. At an independent community pharmacy in rural Mayville, WI, pharmacy technicians were observed before and 3 months after installation of an automated robotic prescription-filling device. The main outcome measures were sequences and timing of technician workflow steps, workflow interruptions, automation surprises, and workarounds. Of the 77 and 80 observations made before and 3 months after robot installation, respectively, 17 different workflow sequences were observed before installation and 38 after installation. Average prescription filling time was reduced by 40 seconds per prescription with use of the robot. Workflow interruptions per observation increased from 1.49 to 1.79 (P = 0.11), and workarounds increased from 10% to 36% after robot use. Although automated prescription-filling devices can increase efficiency, workflow interruptions and workarounds may negate that efficiency. Assessing changes in workflow and sequencing of tasks that may result from the use of automation can help uncover opportunities for workflow policy and procedure redesign.
Walsh, Kristin E.; Chui, Michelle Anne; Kieser, Mara A.; Williams, Staci M.; Sutter, Susan L.; Sutter, John G.
2012-01-01
Objective To explore community pharmacy technician workflow change after implementation of an automated robotic prescription-filling device. Methods At an independent community pharmacy in rural Mayville, WI, pharmacy technicians were observed before and 3 months after installation of an automated robotic prescription-filling device. The main outcome measures were sequences and timing of technician workflow steps, workflow interruptions, automation surprises, and workarounds. Results Of the 77 and 80 observations made before and 3 months after robot installation, respectively, 17 different workflow sequences were observed before installation and 38 after installation. Average prescription filling time was reduced by 40 seconds per prescription with use of the robot. Workflow interruptions per observation increased from 1.49 to 1.79 (P = 0.11), and workarounds increased from 10% to 36% after robot use. Conclusion Although automated prescription-filling devices can increase efficiency, workflow interruptions and workarounds may negate that efficiency. Assessing changes in workflow and sequencing of tasks that may result from the use of automation can help uncover opportunities for workflow policy and procedure redesign. PMID:21896459
Advancing Your Career at LLNL: Meet NIF’s Radiation Control Technicians
DOE Office of Scientific and Technical Information (OSTI.GOV)
Zarco, Judy; Gutierrez, Myrna; Beale, Richard
2017-04-26
Myrna Gutierrez and Judy Zarco took advantage of LLNL's legacy of encouraging continuing education to get the necessary degrees and training to advance their careers at the Lab. As Radiation Control Technicians, they help maintain safety at the National Ignition Facility.
Tarn, Derjung M.; Meredith, Lisa S.; Kagawa-Singer, Marjorie; Matsumura, Shinji; Bito, Seiji; Oye, Robert K.; Liu, Honghu; Kahn, Katherine L.; Fukuhara, Shunichi; Wenger, Neil S.
2005-01-01
PURPOSE Trust is a cornerstone of the physician-patient relationship. We investigated the relation of patient characteristics, religiosity, acculturation, physician ethnicity, and insurance-mandated physician change to levels of trust in Japanese American and Japanese patients. METHODS A self-administered, cross-sectional questionnaire in English and Japanese (completed in the language of their choice) was given to community-based samples of 539 English-speaking Japanese Americans, 340 Japanese-speaking Japanese Americans, and 304 Japanese living in Japan. RESULTS Eighty-seven percent of English-speaking Japanese Americans, 93% of Japanese-speaking Japanese Americans, and 58% of Japanese living in Japan responded to trust items and reported mean trust scores of 83, 80, and 68, respectively, on a scale ranging from 0 to 100. In multivariate analyses, English-speaking and Japanese-speaking Japanese American respondents reported more trust than Japanese respondents living in Japan (P values <.001). Greater religiosity (P <.001), less desire for autonomy (P <.001), and physician-patient relationships of longer duration (P <.001) were related to increased trust. Among Japanese Americans, more acculturated respondents reported more trust (P <.001), and Japanese physicians were trusted more than physicians of another ethnicity. Among respondents prompted to change physicians because of insurance coverage, the 48% who did not want to switch reported less trust in their current physician than in their former physician (mean score of 82 vs 89, P <.001). CONCLUSIONS Religiosity, autonomy preference, and acculturation were strongly related to trust in one’s physician among the Japanese American and Japanese samples studied and may provide avenues to enhance the physician-patient relationship. The strong relationship of trust with patient-physician ethnic match and the loss of trust when patients, in retrospect, report leaving a preferred physician suggest unintended
Pedagogical Strategies for Training Future Technicians in American Aviation Schools
ERIC Educational Resources Information Center
Pazyura, Natalia
2015-01-01
The article is devoted to the question of improvement of quality and efficiency of professional training of future technicians in aviation industry in the American educational establishments. Main attention is paid to the studies of pedagogical technologies, which are used for the sake of qualitative and efficient training of specialists of…
Crash Victim Extrication Training Course: Emergency Medical Technician; Course Guide.
ERIC Educational Resources Information Center
National Highway Traffic Safety Administration (DOT), Washington, DC.
The goal of the National Highway Traffic Safety Administration Department of Transportation has been to upgrade and professionalize the ambulance field, enhance its life-sustaining quality, and encourage its establishment where it does not now exist. The course discusses purpose, mission, and duties of the emergency medical technician; leadership;…
60. Same view, showing technicians hosing down the timbers. Shortly ...
60. Same view, showing technicians hosing down the timbers. Shortly after this photograph was made, the timbers were completely submerged in water, held down by heavy concrete castings. - Wabash & Erie Canal, Lock No. 2, 8 miles east of Fort Wayne, adjacent to U.S. Route 24, New Haven, Allen County, IN
Power Product Equipment Technician: Equipment Systems. Teacher Edition. Student Edition.
ERIC Educational Resources Information Center
Hilley, Robert
This packet contains teacher and student editions on the topic of equipment systems, intended for the preparation of power product equipment technicians. This publication contains seven units: (1) principles of power transmission; (2) mechanical drive systems; (3) principles of fluid power; (4) hydraulic and pneumatic drive systems; (5) wheel and…
Radiological anatomy - evaluation of integrative education in radiology.
Dettmer, S; Schmiedl, A; Meyer, S; Giesemann, A; Pabst, R; Weidemann, J; Wacker, F K; Kirchhoff, T
2013-09-01
Evaluation and analysis of the integrative course "Radiological Anatomy" established since 2007 at the Medical School Hannover (MHH) in comparison with conventional education. Anatomy and radiology are usually taught separately with a considerable time lag. Interdisciplinary teaching of these associated subjects seems logical for several reasons. Therefore, the integrative course "Radiological Anatomy" was established in the second year of medical education, combining these two closely related subjects. This interdisciplinary course was retrospectively evaluated by consideration of a student questionnaire and staff observations. The advantages and disadvantages of integrative teaching in medical education are discussed. The course ratings were excellent (median 1; mean 1.3 on a scale of 1 to 6). This is significantly (p < 0.001) better than the average of all evaluated courses in the respective term (grade 2.8). The course improved the anatomical comprehension (90 %) and the students stated that the topics were relevant for their future medical education (90 %). Furthermore, interest in the subject's anatomy and radiology increased during the course (88 %). According to the students' suggestions the course was enhanced by a visitation in the Department of Radiology and the additional topic central nervous system. Integrative teaching of anatomy and radiology was well received by the students. Both, anatomical and radiological comprehension and the motivation to learn were improved. However, it should be considered, that the amount of work and time required by the teaching staff is considerably increased compared to traditional teaching. © Georg Thieme Verlag KG Stuttgart · New York.
The Impact of the Changing Role of the Ophthalmologist, Optician and Technician.
ERIC Educational Resources Information Center
Heiberger, Michael H.; Werner, D. Leonard
1987-01-01
The present status of the ophthalmologist, optician, and optometric technician in the health care delivery system is examined, and projections about the role and scope of services in 2000 are discussed. (MSE)
The modern Japanese color lexicon.
Kuriki, Ichiro; Lange, Ryan; Muto, Yumiko; Brown, Angela M; Fukuda, Kazuho; Tokunaga, Rumi; Lindsey, Delwin T; Uchikawa, Keiji; Shioiri, Satoshi
2017-03-01
Despite numerous prior studies, important questions about the Japanese color lexicon persist, particularly about the number of Japanese basic color terms and their deployment across color space. Here, 57 native Japanese speakers provided monolexemic terms for 320 chromatic and 10 achromatic Munsell color samples. Through k-means cluster analysis we revealed 16 statistically distinct Japanese chromatic categories. These included eight chromatic basic color terms (aka/red, ki/yellow, midori/green, ao/blue, pink, orange, cha/brown, and murasaki/purple) plus eight additional terms: mizu ("water")/light blue, hada ("skin tone")/peach, kon ("indigo")/dark blue, matcha ("green tea")/yellow-green, enji/maroon, oudo ("sand or mud")/mustard, yamabuki ("globeflower")/gold, and cream. Of these additional terms, mizu was used by 98% of informants, and emerged as a strong candidate for a 12th Japanese basic color term. Japanese and American English color-naming systems were broadly similar, except for color categories in one language (mizu, kon, teal, lavender, magenta, lime) that had no equivalent in the other. Our analysis revealed two statistically distinct Japanese motifs (or color-naming systems), which differed mainly in the extension of mizu across our color palette. Comparison of the present data with an earlier study by Uchikawa & Boynton (1987) suggests that some changes in the Japanese color lexicon have occurred over the last 30 years.
Homogamy and Intermarriage of Japanese and Japanese Americans With Whites Surrounding World War II
Ono, Hiromi; Berg, Justin
2010-01-01
Although some sociologists have suggested that Japanese Americans quickly assimilated into mainstream America, scholars of Japanese America have highlighted the heightened exclusion that the group experienced. This study tracked historical shifts in the exclusion level of Japanese and Japanese Americans in the United States surrounding World War II with homogamy and intermarriage with Whites for the prewar (1930–1940) and resettlement (1946–1966) marriage cohorts. The authors applied log-linear models to census microsamples (N = 1,590,416) to estimate the odds ratios of homogamy versus intermarriage. The unadjusted odds ratios of Japanese Americans declined between cohorts and appeared to be consistent with the assimilation hypothesis. Once compositional influences and educational pairing patterns were adjusted, however, the odds ratios increased and supported the heightened exclusion hypothesis. PMID:21116449
Respiratory Findings in Dental Laboratory Technicians in Rasht (North of Iran)
Shakiba, Maryam; Nejad, Azita Tangestani; Massahnia, Sara; Shiari, Ali
2011-01-01
Background There are several occupations that can expose people to some air pollutants. Dental technicians are exposed to inorganic dust and chemical vapors when making dental prosthesis that can put them at risk for respiratory problems. This study was performed to assess respiratory dysfunction in a group of dental technicians Materials and Methods This was a cross-sectional study designed to ascertain the prevalence of respiratory disorders in dental laboratory technicians in Rasht, a city located in north of Iran. A Structured questionnaire was adapted according to the European Community Respiratory Health Survey questionnaire and used to elicit information regarding sociodemographic characteristics and medical status of the study participants. The ventilation status, protective measures and direct exposure to materials in the laboratories were directly observed by the observers and subjects underwent respiratory tests and chest x-ray. Results The mean age of dental technicians was 31.31 yrs (range 18-56 years) and 83% were males with a mean dental work experience of 9.04 years. In 54.8% of cases, the work environment did not have air conditioning system. The most common signs and symptoms were cough (38.1%) and wheezing (16.7%). There was a significant correlation between smoking and respiratory signs. Restrictive airway pattern and air trapping were two prevalent findings which were observed in 85.7% and 33.3% of the subjects. Cigarette smoking had a negative effect on FEV1, FEF25%-75%, and TLC causing a significant reduction in all three parameters (p < 0.05). The most prevalent finding was interstitial opacity which was observed in 10 individuals (23.8%). This finding was not significantly associated with age, gender, cigarette smoking, or daily work hours. However, there was a significant statistical association between work experience and interstitial opacity. Conclusion The prevalence of respiratory dysfunction and chest x-ray findings were high as in
Illinois Occupational Skill Standards: Agricultural Laboratory and Field Technician Cluster.
ERIC Educational Resources Information Center
Illinois Occupational Skill Standards and Credentialing Council, Carbondale.
These Illinois skill standards for the agricultural laboratory and field technician cluster are intended to serve as a guide to workforce preparation program providers as they define content for their programs and to employers as they establish the skills and standards necessary for job acquisition. They could also serve as a mechanism for…
APOLLO 16 TECHNICIAN ATTACHES PLAQUE TO LUNAR MODULE'S DESCENT STAGE
NASA Technical Reports Server (NTRS)
1972-01-01
Working inside the Apollo 16 Saturn V space vehicle at the launch pad, technician Ken Crow attaches a stainless steel plaque bearing the names of Apollo 16 astronauts John W. Young, Thomas K. Mattingly II and Charles M. Duke, Jr., to the Lunar Module's descent stage, which will remain on the Moon's surface.
Basic Training Program for Emergency Medical Technician Ambulance: Course Guide.
ERIC Educational Resources Information Center
Fucigna, Joseph T.; And Others
In an effort to upgrade or further develop the skills levels of all individuals involved in the emergency medical care service, this training program was developed for the National Highway Safety Bureau. This specific course is an attempt to organize, conduct, and standardize a basic training course for emergency medical technicians (EMTs). The…
ERIC Educational Resources Information Center
Pinard, Helene
Drawing from research conducted in 1990-91, this report examines trends affecting the future work of technicians in Quebec, their pre-employment education, and the link between college and work. Part 1 focuses on aspects of the economic, technological, and social environment that will influence the future role of technicians. Economic concerns…
Child Passenger Safety Technician Consultation in the Pediatric Primary Care Setting.
Burstein, Dina; Zonfrillo, Mark R; Baird, Janette; Mello, Michael J
2017-09-01
Correct use of a child safety seat (CSS) can reduce the risk of fatal motor vehicle crash-related injury by up to 71%; however, misuse rates for CSS are as high as 70%. We recruited 189 caregivers at 2 large suburban pediatric office practices; 94 in the intervention group and 95 in the control group. All participants completed a baseline survey and received a CSS safety brochure. Intervention participants had their CSS installation checked at enrollment by a certified child passenger safety (CPS) technician. Follow-up was conducted 4 months post enrollment. Intervention group participants had a 21.3% reduction in critical misuse at follow-up, whereas control participants critical misuse rate at follow-up was identical to the intervention group at baseline. A consult with a certified CPS technician, at the time of a routine visit to the pediatrician, resulted in a reduction in CSS misuse rates.
Lapane, Kate L; Hughes, Carmel M
2004-11-01
To provide baseline levels of job satisfaction and stress among members of the long-term care pharmacy team participating in the Fleetwood Phase III evaluation. Cross-sectional design; long-term care pharmacy provider in North Carolina (the implementation site of the large-scale Fleetwood Phase III study). All current pharmacy employees as of May/June 2002. None. Health Professional Stress Inventory and job satisfaction. Ninety-four percent (16/17) of consultant pharmacists were satisfied with their job, with 89% reporting they would definitely choose to be a pharmacist again. Seventy-five percent both of dispensing pharmacists and pharmacy technicians reported overall job satisfaction. Forty-one reported that they would not choose to be a pharmacist (pharmacy technician) again. The most frequently reported sources of stress among the dispensing pharmacists and pharmacy technicians were conflicts with non-work obligations (i.e., family, personal life) and the ability to perform duties with short staffing. In addition, inadequate pay and few opportunities for job advancement were often/frequent sources of stress among pharmacy technicians. More than one third of dispensing pharmacists also reported stress frequently because of fears of mistakes in patient treatment. Overall, consultants are very satisfied with their positions, although dispensing pharmacists and pharmacy technicians are less satisfied with their work. The reasons may be because of the different nature of each job, as well as staffing shortages. The extent to which the Fleetwood Model can improve job satisfaction and impact on stress will be evaluated once we resurvey the pharmacy team after the intervention period of the Fleetwood Phase III study.
The Performance of Maintenance Technicians on the Job. Final Report.
ERIC Educational Resources Information Center
Orlansky, J.; String, J.
This paper reviews data on one possible measure for evaluating the effectiveness of training for maintenance technicians, i.e., the unnecessary removal of non-faulty parts during actions taken to identify and correct malfunctions in equipment. Such data may be found in the maintenance management data systems of the military services. It was found…
Aviation Support Equipment Technician E 3 & 2. Rate Training Manual.
ERIC Educational Resources Information Center
Naval Education and Training Command, Pensacola, FL.
The training manual is designed as a self study text for use by Navy and Naval Reserve personnel preparing to meet the professional qualifications for advancement to Petty Officer Third Class and Petty Officer Second Class in the rating of Aviation Support Equipment (ASE) Technician E (Electrical). The first chapter provides information on the…
U.S.-MEXICO BORDER PROGRAM ARIZONA BORDER STUDY--TECHNICIAN WALKTHROUGH QUESTIONNAIRE DATA
The Technician Walk-through Questionnaire data set updates information about each household from the Descriptive Questionnaire and includes relevant information regarding dwelling arrangements, as well as interior and exterior residential characteristics. The information is from...
Cultural Competence in Business Japanese.
ERIC Educational Resources Information Center
Koike, Shohei
Cultural competence in business Japanese requires more than superficial knowledge of business etiquette. One must truly understand why Japanese people think and act differently from their American counterparts. For example, instruction in the use of Japanese taxis must be accompanied by instruction in the concept and implications of seating order…
Statistics in Japanese universities.
Ito, P K
1979-01-01
The teaching of statistics in the U.S. and Japanese universities is briefly reviewed. It is found that H. Hotelling's articles and subsequent relevant publications on the teaching of statistics have contributed to a considerable extent to the establishment of excellent departments of statistics in U.S. universities and colleges. Today the U.S. may be proud of many well-staffed and well-organized departments of theoretical and applied statistics with excellent undergraduate and graduate programs. On the contrary, no Japanese universities have an independent department of statistics at present, and the teaching of statistics has been spread among a heterogeneous group of departments of application. This was mainly due to the Japanese government regulation concerning the establishment of a university. However, it has recently been revised so that an independent department of statistics may be started in a Japanese university with undergraduate and graduate programs. It is hoped that discussions will be started among those concerned on the question of organization of the teaching of statistics in Japanese universities as soon as possible. PMID:396154
Basic English Writers' Japanese-English Wordbook.
ERIC Educational Resources Information Center
Daniels, F. J.
The author of this Japanese-English wordbook suggests that it may be used by Japanese writers of English, by those translating from Japanese into English, and by learners of Japanese, in addition to its main intended uses as an aid to the preparation of teaching material and as a work of reference for teachers. A translator will need to supplement…
An Instructional Program for Training Nondestructive Testing and Inspection Technicians.
ERIC Educational Resources Information Center
Stokes, Vernon L.
This document, the second portion of a two-part study, is designed to provide a guide for the formal training of technicians for nondestructive testing and inspection. Information in the guide is based on results of the industrial survey discussed in Part I. The subject matter is intended to be both flexible and comprehensive, and instructional…
DOE Office of Scientific and Technical Information (OSTI.GOV)
Thibodeaux, J.; Hensley, J.
2013-01-01
The biomass thermochemical conversion platform at the National Renewable Energy Laboratory (NREL) develops and demonstrates processes for the conversion of biomass to fuels and chemicals including gasification, pyrolysis, syngas clean-up, and catalytic synthesis of alcohol and hydrocarbon fuels. In this talk, I will discuss the challenges of being a technician in this type of research environment, including handling and working with catalytic materials and hazardous chemicals, building systems without being given all of the necessary specifications, pushing the limits of the systems through ever-changing experiments, and achieving two-way communication with engineers and supervisors. I will do this by way ofmore » two examples from recent research. First, I will describe a unique operate-to-failure experiment in the gasification of chicken litter that resulted in the formation of a solid plug in the gasifier, requiring several technicians to chisel the material out. Second, I will compare and contrast bench scale and pilot scale catalyst research, including instances where both are conducted simultaneously from common upstream equipment. By way of example, I hope to illustrate the importance of researchers 1) understanding the technicians' perspective on tasks, 2) openly communicating among all team members, and 3) knowing when to voice opinions. I believe the examples in this talk will highlight the crucial role of a technical staff: skills attained by years of experience to build and operate research and production systems. The talk will also showcase the responsibilities of NREL technicians and highlight some interesting behind-the-scenes work that makes data generation from NREL's thermochemical process development unit possible.« less
Napier, Patti; Norris, Pauline; Braund, Rhiannon
2018-04-01
Internationally there is an increasing focus on the clinical and cognitive services that pharmacists can provide. Lack of time has been identified as a barrier to pharmacists increasing their clinical activities. Within the pharmacy workplace there are many tasks that can only be performed by a pharmacist. The final accuracy check of a dispensed prescription is currently the sole responsibility of pharmacists in New Zealand. This takes up a significant amount of time during a pharmacist's work day. The introduction of a checking technician role has been suggested to allow pharmacists more time to do more patient focused work. To investigate the amount of time pharmacy staff spend on specific activities and to establish whether the introduction of a checking technician into twelve pilot sites increased the amount of time that the pharmacists could spend on patient focused activities. This study utilised a self-reported work sampling technique in twelve pilot sites, selected from both the hospital and community settings. Work sampling using an electronic device was conducted at two time-points (before the implementation of a Pharmacy Accuracy Checking Technician (PACT) role and when the PACT was in place). Data was collected at 10 min intervals for the period of five days, a working week. Tasks were grouped into patient focused, dispensing and personal activities. The introduction of the PACT into the pilot sites saw a mean increase of 19% in pharmacists' patient focused activities and a mean 20% decrease in dispensing activities. The introduction of a checking technician role into New Zealand pharmacies demonstrated the potential to provide pharmacists with more time to spend on patient focused activities. Copyright © 2017 Elsevier Inc. All rights reserved.
Air and smear sample calculational tool for Fluor Hanford Radiological control
DOE Office of Scientific and Technical Information (OSTI.GOV)
BAUMANN, B.L.
2003-07-11
A spreadsheet calculation tool was developed to automate the calculations performed for determining the concentration of airborne radioactivity and smear counting as outlined in HNF-13536, Section 5.2.7, ''Analyzing Air and Smear Samples''. This document reports on the design and testing of the calculation tool. Radiological Control Technicians (RCTs) will save time and reduce hand written and calculation errors by using an electronic form for documenting and calculating work place air samples. Current expectations are RCTs will perform an air sample and collect the filter or perform a smear for surface contamination. RCTs will then survey the filter for gross alphamore » and beta/gamma radioactivity and with the gross counts utilize either hand calculation method or a calculator to determine activity on the filter. The electronic form will allow the RCT with a few key strokes to document the individual's name, payroll, gross counts, instrument identifiers; produce an error free record. This productivity gain is realized by the enhanced ability to perform mathematical calculations electronically (reducing errors) and at the same time, documenting the air sample.« less
Respiratory assessment of refractory ceramic fibers in a heating technician population.
Lucas, David; Clamagirand, Vincent; Capellmann, Pascale; Hervé, Agnès; Mauguen, Gilles; Le Mer, Yannik; Jegaden, Dominique
2018-04-01
Refractory ceramic fibers (RCF) have been extensively used for insulation in condensing boilers. The aim of this study was to evaluate the respiratory exposure to these fibers among maintenance heating technicians. We first created a working group (Carsat Brittany and Finistère Occupational Health Services) and carried out a sampling strategy. Atmospheric measurements were done during work tasks, and filters were analyzed by phase contrast microscopy (PCM) and scanning electron microscopy (SEM) in French approved laboratories. Four companies were included for a total of 15 days of work. During those 15 workdays, 12 SEM and 21 PCM samples were taken and analyzed. The phase contrast microscopy and SEM average results were 0.04 and 0.004 fibers/cm 3 , respectively. In conclusion, the study confirms heating technician RCF respiratory exposure during maintenance work for both condensation gas boilers and atmospheric boilers. Collective and individual prevention measures should be implemented along with appropriate medical follow-up.
1989-06-01
United States. The chief function of this principle is to cut--it separates all things. It classifies everything into black and white, good and bad . The...content included articles on masturbation , petting, and 99 intercourse. One of Japan’s all time best selling books in recent years, Totto-chan, is a...to the th: every Japanese will be judged by whether he celebrates this or not. That is how people will be determined to be good Japanese or bad 112
Will X-ray Safety Glasses Become Mandatory for Radiological Vascular Interventions?
Thomas, Rohit Philip; Grau, Mathias; Eldergash, Osama; Kowald, Tobias; Schnabel, Johannes; Szczechowicz, Marcin; Chavan, Ajay
2018-07-01
The annual permissible radiation ocular lens dose has been reduced to 20 millisieverts (mSv) in the current European directive 2013/59/Euratom. The aim of this study was to evaluate the personal radiation dose for vascular interventions with special focus on ocular lens dose. From May 2016 to October 2016, the personal radiation doses of two interventionists and four technicians were prospectively recorded during 206 vascular interventions. The position of personnel, intervention type and fluoroscopy time were recorded. Parameters evaluated were total body dose measured by film dosimeter, hand dose measured by ring thermoluminescent dosimeter (TLD) and ocular lens dose measured by TLD placed in front of the safety glasses. Linear regression analysis was used to estimate the dose at 2 and 5 years. The ocular lens dose, hand and total body dose of the two interventionists were 11/5, 56/47 and 0.6 mSv each, respectively. The estimated 5-year ocular dose was 113.08 mSv (95% CI 38.2-187.97)/40.95 (95% CI 16.9-64.7). Similarly, hand dose was 608.4 mSv (95% CI 442.78-774.38)/514.47 (95% CI 329.83-699.10) and body dose 6.07 mSv (95% CI 4.70-8.22)/5.12 (95% CI 3.65-6.59), respectively. Amongst four technicians, only the first assistant showed recordings of 0.3 mSv body dose, 2 mSv ocular lens dose and 5 mSv hand dose. The yearly ocular lens dose, particularly for interventionists dealing with complex interventions, could cross the permitted yearly limit set by the new Euratom directive. Therefore, X-ray safety glasses would become mandatory for complex radiological vascular interventions. Level III, non-randomized controlled cohort/follow-up study.
Sawai, Tadashi; Sakai, Tatsuo
2010-03-01
In the second decade of the Showa period, great changes were made in the Japanese anatomical terms. It has been proposed that the presentation of JNA (Jenaer nomina anatomica) was one of the factors leading to the change. The Japanese language reform campaign, however, played an important role. The party kokugoaigo doumei and its successor kokugo kyokai required concise and unified technical terms. The anatomical nomenclature committee of the Japanese Association of Anatomists worked to satisfy this requirement. The committee consulted with nomenclature committees of other medical associations and took account of their opinions. The anatomical nomenclature committee abandoned the literal translation from Latin to Japanese and shaped a succinct Japanese terminology. Modern Japanese anatomical terms are based on this terminology.
Niederhauser, Andrea; Zimmermann, Chantal; Fishman, Liat; Schwappach, David L B
2018-05-17
In recent years, the involvement of pharmacy technicians in medication reconciliation has increasingly been investigated. The aim of this study was to assess the implications on professional roles and collaboration when a best possible medication history (BPMH) at admission is obtained by pharmacy technicians. Qualitative study with semistructured interviews. Data were analysed using a qualitative content analysis approach. Internal medicine units in two mid-sized Swiss hospitals. 21 staff members working at the two sites (6 pharmacy technicians, 2 pharmacists, 6 nurses, 5 physician residents and 2 senior physicians). Pharmacy technicians generally appreciated their new tasks in obtaining a BPMH. However, they also experienced challenges associated with their new role. Interviewees reported unease with direct patient interaction and challenges with integrating the new BPMH tasks into their regular daily duties. We found that pharmacists played a key role in the BPMH process, since they act as coaches for pharmacy technicians, transmit information to the physicians and reconcile preadmission medication lists with admission orders. Physicians stated that they benefitted from the delegation of administrative tasks to pharmacy technicians. Regarding the interprofessional collaboration, we found that pharmacy technicians in the study acted on a preliminary administrative level and did not become part of the larger treatment team. There was no direct interaction between pharmacy technicians and physicians, but rather, the supervising pharmacists acted as intermediaries. The tasks assumed by pharmacy technicians need to be clearly defined and fully integrated into existing processes. Engaging pharmacy technicians may generate new patient safety risks and inefficiencies due to process fragmentation. Communication and information flow at the interfaces between professional groups therefore need to be well organised. More research is needed to understand if and under which
E-learning for laurea in biomedical laboratory technicians: presentation of a pilote study.
Giansanti, D; Castrichella, L; Giovagnoli, M R
2007-01-01
The aim of the paper is to afford the design and construction of an e-learning model answering to these requirements for the LHCP in Technician of Biomedical Laboratory. The SCENARIO of work for the technician in biomedical laboratory (TBL) is radically changed and e-learning should answer to these new challenges. In particular today He or She should be able to mange in tele-pathology applications the tissue on the so called virtual glass. An architecture for the e-learning based on Web-Dav and a Light software for the virtual glass tele-pathology consultation has been designed with also a special care for the teachers' and students' platforms. At the moment we are investigating Telepathology platforms for the extranet consulting of virtual glasses.
The new consumer of medicine--the pharmacy technicians' perspective.
Traulsen, Janine M; Noerreslet, Mikkel
2004-08-01
Market research, and more recently health services research, has adopted the concept of the 'new consumer' to describe customers/patients who are becoming more demanding. This study aims to determine the relevancee of the concept 'new consumer' for pharmacy practice, in light of the theory of 'risk society'. Qualitative in-depth interviews were carried out with seven pharmacy technicians from six different pharmacies in the Copenhagen area, Denmark. They were asked to describe developments, over time, in consumer behaviour. They were asked to focus on three themes: information, the authority of the pharmacy staff, and their predictions of the future pharmacy customer. Young customers, particularly parents of pre-school children, as well as the chronically ill appeared to share the characteristics associated with the 'new consumer'. They were: information strong (well-informed) and information seeking (inquisitive); asked critical questions; showed a desire to longer initiate dialogue; sought counselling and in general no longer blindly accepted the authority of the pharmacy staff. According to pharmacy technicians a 'new consumer' does exist and is visible in community pharmacies in Copenhagen. Seen in light of the theory of risk society, we further conclude that the behaviour of the 'new consumer' is indicative of an attempt to minimize risk of drug therapy.
NACA Lewis Researcher and Technicians Discuss a Test Setup
1956-12-21
Researcher Bill Reiwaldt discusses the preparations for a test in the Altitude Wind Tunnel with technicians Jack Wagner and Dick Golladay at the National Advisory Committee for Aeronautics (NACA) Lewis Flight Propulsion Laboratory. Research engineers developed ideas for tests that were often in response to requests from the military or aircraft industry. Arrangements were made to obtain an engine for the study and to transport it to the Cleveland laboratory. The engine was brought into the facility’s shop area, where it was readied for investigation. It was common for several different engines to be worked on simultaneously in the shop. The researcher would discuss the engine and the test objectives with the Test Installation Division and the facility’s technicians. The operations team would handle the installation of the instrumentation and fitting the test into the facility’s schedule. Upon completion of the previous test, the engine was removed. The next engine was lifted by an overhead crane and transported from the shop to the test section. The engine was connected to the measurement devices and fuel and oil supply lines. Engines were tested over numerous runs under varying conditions and with variations on the configuration. The findings and test procedure were then described in research or technical memorandums and distributed to industry.
ERIC Educational Resources Information Center
Thompson, Joselyn H.
This three-volume student text is designed for use by Air Force personnel enrolled in a self-study extension course for medical laboratory technicians. Covered in the individual volumes are hematology (the physiology of blood, complete blood counts and related studies, erythrocyte studies, leukocyte and thrombocyte maturation, and blood…
Training Program for Emergency Medical Technician: Dispatcher. 2--Instructor Lesson Plans.
ERIC Educational Resources Information Center
National Highway Traffic Safety Administration (DOT), Washington, DC.
Intended to assist instructors who wish to conduct a training course for emergency medical technicians (EMTs) serving as dispatchers, this document contains detailed lesson plans organized to structure course presentations. Each lesson plan includes the following elements: unit objectives; suggestions for adapting the lessons to local policies and…
ASE Program Certification Standards for Medium/Heavy Truck Technician Training Programs.
ERIC Educational Resources Information Center
National Automotive Technicians Education Foundation, Herndon, VA.
This publication provides the evaluation policies, procedures, and standards to which a medium/heavy truck technician training program must adhere to be granted certification by the National Institute for Automotive Service Excellence. The policies section has three parts: the automobile areas that may be certified and minimum requirements for…
Laser System Technician. A Catalog of Performance Objectives and Performance Guides.
ERIC Educational Resources Information Center
Florida State Dept. of Education, Tallahassee. Div. of Vocational, Adult, and Community Education.
This Vocational-Technical Education Consortium of States (V-TECS) catalog contains the state-of-the-art tasks and standards of performance for the occupation of laser system technician. It provides the curriculum specialist or instructor with the foundation for instructional development. Performance objectives and performance guides are provided…
ASE Program Certification Standards for Collision Repair & Refinish Technician Training Programs.
ERIC Educational Resources Information Center
National Automotive Technicians Education Foundation, Herndon, VA.
This publication provides the evaluation policies, procedures, and standards to which an auto body technician training program must adhere to be granted certification by the National Institute for Automotive Service Excellence. The policies section has three parts: the automobile areas that may be certified and minimum requirements for…
Basic Training Course/Emergency Medical Technician (Second Edition). Instructor's Lesson Plan.
ERIC Educational Resources Information Center
National Highway Traffic Safety Administration (DOT), Washington, DC.
This document containing instructor lesson plans is one of three prepared to update a basic training program for emergency medical technicians (EMTs). (A course guide containing planning and management information and a study guide are available separately.) Material covers all emergency medical techniques currently considered to be within the…
Educational Media Technician: A Suggested Two-Year Post High School Curriculum.
ERIC Educational Resources Information Center
State Univ. of New York, Alfred. Agricultural and Technical Coll.
The first portion of the guidelines discusses the need to train educational technicians for the field of communications (including education, instructions, industrial organizations or agencies), in order to meet changing educational techniques and the increasing number of resources for learning. A detailed curriculum guide is presented for a…
Technicians assist STS-41 Pilot Cabana his parachute prior to egress training
NASA Technical Reports Server (NTRS)
1990-01-01
Technicians (training personnel) assist STS-41 Discovery, Orbiter Vehicle (OV) 103, Pilot Robert D. Cabana with his launch and entry suit (LES) parachute prior to emergency egress training exercises in JSC's Mockup and Integration Laboratory (MAIL) Bldg 9A.
Spacecraft and propulsion technician error
NASA Astrophysics Data System (ADS)
Schultz, Daniel Clyde
Commercial aviation and commercial space similarly launch, fly, and land passenger vehicles. Unlike aviation, the U.S. government has not established maintenance policies for commercial space. This study conducted a mixed methods review of 610 U.S. space launches from 1984 through 2011, which included 31 failures. An analysis of the failure causal factors showed that human error accounted for 76% of those failures, which included workmanship error accounting for 29% of the failures. With the imminent future of commercial space travel, the increased potential for the loss of human life demands that changes be made to the standardized procedures, training, and certification to reduce human error and failure rates. Several recommendations were made by this study to the FAA's Office of Commercial Space Transportation, space launch vehicle operators, and maintenance technician schools in an effort to increase the safety of the space transportation passengers.
ERIC Educational Resources Information Center
Tatsumi, Naofumi
2012-01-01
Previous research shows that American learners of Japanese (AJs) tend to differ from native Japanese speakers in their compliment responses (CRs). Yokota (1986) and Shimizu (2009) have reported that AJs tend to respond more negatively than native Japanese speakers. It has also been reported that AJs' CRs tend to lack the use of avoidance or…
Machine Learning and Radiology
Wang, Shijun; Summers, Ronald M.
2012-01-01
In this paper, we give a short introduction to machine learning and survey its applications in radiology. We focused on six categories of applications in radiology: medical image segmentation, registration, computer aided detection and diagnosis, brain function or activity analysis and neurological disease diagnosis from fMR images, content-based image retrieval systems for CT or MRI images, and text analysis of radiology reports using natural language processing (NLP) and natural language understanding (NLU). This survey shows that machine learning plays a key role in many radiology applications. Machine learning identifies complex patterns automatically and helps radiologists make intelligent decisions on radiology data such as conventional radiographs, CT, MRI, and PET images and radiology reports. In many applications, the performance of machine learning-based automatic detection and diagnosis systems has shown to be comparable to that of a well-trained and experienced radiologist. Technology development in machine learning and radiology will benefit from each other in the long run. Key contributions and common characteristics of machine learning techniques in radiology are discussed. We also discuss the problem of translating machine learning applications to the radiology clinical setting, including advantages and potential barriers. PMID:22465077
Helping to Meet Today's Energy Demands: Natural Gas Technician Training in Algeria
ERIC Educational Resources Information Center
Dutton, Bernard
1976-01-01
The training program, located in Arzew, Algeria, is designed to train technicians in all phases of gas technology. The program provides classroom instruction, on-the-job training, and language instruction. The different phases involved in the training program are described. (EC)
Royal Engineer Geographic Technicians: Exploring their attitudes to education and training
NASA Astrophysics Data System (ADS)
Knight, John Anthony
A creative approach is presented for understanding the attitudes of Royal Engineer (RE) Geographic Technicians (Geo Techs) to training and education. Through a grounded theory methodology, participants' experiences of learning and teaching are explored. These provide a greater awareness and perception of attitudes than have emerged through more established, formal methods of evaluating the effectiveness of training. Recent developments in technology, doctrine, requirements and operations have brought about significant changes to the range and complexity of subjects taught in the field of Geospatial Intelligence (GEOINT). This in turn has increased the challenges to RE staff and students, many of whom find themselves instructing on or undertaking demanding degree level courses without the requisite formal qualifications. Grounded theory, based on guidelines rather than rigid rules, is adopted to provide a study of RE Geographic Technicians' learning experiences from the perspective of those who live it and for an interpretive understanding of their meanings to emerge. The policies, culture and social processes in which the RE Geo training takes place are explored to appreciate the influence of the training environment on learning. Data obtained through focus groups held with students and instructors, and through in-depth interviews with individuals who hold key roles associated with the course, recognises the relativism of multiple social realities in developing a rich source of knowledge on attitudes to learning. The collection, synthesis and analysis of data led to the emergence of core categories: context, commitment, expectations, motivation, qualifications, relevance and respect. Through their engagement the research participants' awareness, in particular of instructors, of Geographic Technicians' attitudes to training and education has been raised. Using the theoretical framework of communities of practice, the challenges and effectiveness of the RSMS as a
Relationship Between Accreditation Status and Hourly Wages of Medical Record Technicians.
ERIC Educational Resources Information Center
Passmore, David Lynn; Marron, Michael
A study examined the relationship between accreditation status and hourly wages of medical record technicians (MRTs) in four major metropolitan areas (Chicago, St. Louis, Kansas City, and Atlanta) during August 1975. Multiple regression analysis of the hourly wages of 590 female, full-time MRTs collected through a government hospital wage survey…
Animal Health Technicians: A Survey of Program Graduates and of Veterinarians.
ERIC Educational Resources Information Center
Barsaleau, Richard B.; Walters, Henry R.
This document compiles the reports of two surveys conducted by Cosumnes River College to determine the status of graduates of its Animal Health Technician program, and to assess the acceptance and use of such paraprofessionals by area veterinarians. Information concerning type of employment, state certification, salaries, types of duties, length…
Technicians assist STS-47 MS Jemison prior to JSC bailout training
NASA Technical Reports Server (NTRS)
1992-01-01
STS-47 Endeavour, Orbiter Vehicle (OV) 105, Mission Specialist (MS) Mae C. Jemison, assisted by technicians, adjusts a strap on her launch and entry suit (LES) prior to launch emergency egress (bailout) exercises in JSC's Mockup and Integration Laboratory Bldg 9A. Jemison is making her first flight in space.
Automated classification of radiology reports to facilitate retrospective study in radiology.
Zhou, Yihua; Amundson, Per K; Yu, Fang; Kessler, Marcus M; Benzinger, Tammie L S; Wippold, Franz J
2014-12-01
Retrospective research is an import tool in radiology. Identifying imaging examinations appropriate for a given research question from the unstructured radiology reports is extremely useful, but labor-intensive. Using the machine learning text-mining methods implemented in LingPipe [1], we evaluated the performance of the dynamic language model (DLM) and the Naïve Bayesian (NB) classifiers in classifying radiology reports to facilitate identification of radiological examinations for research projects. The training dataset consisted of 14,325 sentences from 11,432 radiology reports randomly selected from a database of 5,104,594 reports in all disciplines of radiology. The training sentences were categorized manually into six categories (Positive, Differential, Post Treatment, Negative, Normal, and History). A 10-fold cross-validation [2] was used to evaluate the performance of the models, which were tested in classification of radiology reports for cases of sellar or suprasellar masses and colloid cysts. The average accuracies for the DLM and NB classifiers were 88.5% with 95% confidence interval (CI) of 1.9% and 85.9% with 95% CI of 2.0%, respectively. The DLM performed slightly better and was used to classify 1,397 radiology reports containing the keywords "sellar or suprasellar mass", or "colloid cyst". The DLM model produced an accuracy of 88.2% with 95% CI of 2.1% for 959 reports that contain "sellar or suprasellar mass" and an accuracy of 86.3% with 95% CI of 2.5% for 437 reports of "colloid cyst". We conclude that automated classification of radiology reports using machine learning techniques can effectively facilitate the identification of cases suitable for retrospective research.
Pediatric radiology malpractice claims - characteristics and comparison to adult radiology claims.
Breen, Micheál A; Dwyer, Kathy; Yu-Moe, Winnie; Taylor, George A
2017-06-01
Medical malpractice is the primary method by which people who believe they have suffered an injury in the course of medical care seek compensation in the United States and Canada. An increasing body of research demonstrates that failure to correctly diagnose is the most common allegation made in malpractice claims against radiologists. Since the 1994 survey by the Society of Chairmen of Radiology in Children's Hospitals (SCORCH), no other published studies have specifically examined the frequency or clinical context of malpractice claims against pediatric radiologists or arising from pediatric imaging interpretation. We hypothesize that the frequency, character and outcome of malpractice claims made against pediatric radiologists differ from those seen in general radiology practice. We searched the Controlled Risk Insurance Co. (CRICO) Strategies' Comparative Benchmarking System (CBS), a private repository of approximately 350,000 open and closed medical malpractice claims in the United States, for claims related to pediatric radiology. We further queried these cases for the major allegation, the clinical environment in which the claim arose, the clinical severity of the alleged injury, indemnity paid (if payment was made), primary imaging modality involved (if applicable) and primary International Classification of Diseases, 9th revision (ICD-9) diagnosis underlying the claim. There were a total of 27,056 fully coded claims of medical malpractice in the CBS database in the 5-year period between Jan. 1, 2010, and Dec. 31, 2014. Of these, 1,472 cases (5.4%) involved patients younger than 18 years. Radiology was the primary service responsible for 71/1,472 (4.8%) pediatric cases. There were statistically significant differences in average payout for pediatric radiology claims ($314,671) compared to adult radiology claims ($174,033). The allegations were primarily diagnosis-related in 70% of pediatric radiology claims. The most common imaging modality implicated in
ERIC Educational Resources Information Center
Campbell, Allan, Ed.; Dawson, Irene, Ed.
On May 8 and 9, 1970, 170 people from six provinces and four states gathered in Thunder Bay, Ontario, at Lakehead University, for a two-day workshop on the subject of library technicians. The objectives of this workshop were: (1) to consider the role of library assistants or technicians and the type of post-secondary school training which they…
Japanese American Identity Dilemma.
ERIC Educational Resources Information Center
Maykovich, Minako K.
The major theme of this book is the label "Quiet American" for the Japanese American. In order to locate Japanese Americans sociologically and psychologically in the structure of American society, various concepts such as "marginal man,""alienation," and "inauthenticity" are examined, specifying these…
Aviation Technician Training I and Task Analyses: Semester II. Field Review Copy.
ERIC Educational Resources Information Center
Upchurch, Richard
This guide for aviation technician training begins with a course description, resource information, and a course outline. Tasks/competencies are categorized into 16 concept/duty areas: understanding technical symbols and abbreviations; understanding mathematical terms, symbols, and formulas; computing decimals; computing fractions; computing ratio…
Machine learning and radiology.
Wang, Shijun; Summers, Ronald M
2012-07-01
In this paper, we give a short introduction to machine learning and survey its applications in radiology. We focused on six categories of applications in radiology: medical image segmentation, registration, computer aided detection and diagnosis, brain function or activity analysis and neurological disease diagnosis from fMR images, content-based image retrieval systems for CT or MRI images, and text analysis of radiology reports using natural language processing (NLP) and natural language understanding (NLU). This survey shows that machine learning plays a key role in many radiology applications. Machine learning identifies complex patterns automatically and helps radiologists make intelligent decisions on radiology data such as conventional radiographs, CT, MRI, and PET images and radiology reports. In many applications, the performance of machine learning-based automatic detection and diagnosis systems has shown to be comparable to that of a well-trained and experienced radiologist. Technology development in machine learning and radiology will benefit from each other in the long run. Key contributions and common characteristics of machine learning techniques in radiology are discussed. We also discuss the problem of translating machine learning applications to the radiology clinical setting, including advantages and potential barriers. Copyright © 2012. Published by Elsevier B.V.
Hilmes, Melissa A; Hyatt, Eddie; Penrod, Cody H; Fleming, Amy E; Singh, Sudha P
2016-03-01
Traditionally, the pediatric radiology elective for medical students and pediatric residents constituted a morning teaching session focused mainly on radiography and fluoroscopy. A more structured elective was desired to broaden the exposure to more imaging modalities, create a more uniform educational experience, and include assessment tools. In 2012, an introductory e-mail and formal syllabus, including required reading assignments, were sent to participants before the start date. A rotating weekly schedule was expanded to include cross-sectional imaging (ultrasound, CT, MR) and nuclear medicine. The schedule could accommodate specific goals of the pediatric resident or medical student, as requested. Starting in 2013, an online pre-test and post-test were developed, as well as an online end-of-rotation survey specific to the pediatric radiology elective. Taking the Image Gently pledge was required. A scavenger hunt tool, cue cards, and electronic modules were added. Pre-test and post-test scores, averaged over 2 years, showed improvement in radiology knowledge, with scores increasing by 27% for medical students and 21% for pediatric residents. Surveys at the end of the elective were overwhelmingly positive, with constructive criticism and complimentary comments. We have successfully created an elective experience in radiology that dedicates time to education while preserving the workflow of radiologists. We have developed tools to provide a customized experience with many self-directed learning opportunities. Our tools and techniques are easily translatable to a general or adult radiology elective. Copyright © 2016 American College of Radiology. Published by Elsevier Inc. All rights reserved.
ERIC Educational Resources Information Center
Alberta Advanced Education and Technology, 2012
2012-01-01
The graduate of the Automotive Service Technician apprenticeship program is a certified journeyperson who will be able to: (1) repair, maintain and overhaul or modify a motor vehicle; (2) comprehend work orders, technical bulletins and estimates, and relate the information to the job at hand; (3) interpret warranty policy in terms of service…
Parts Technician: Apprenticeship Course Outline. Apprenticeship and Industry Training. 2708.1
ERIC Educational Resources Information Center
Alberta Advanced Education and Technology, 2008
2008-01-01
The graduate of the Parts Technician Apprenticeship Program is a certified journeyperson who will be able: (1) have a comprehensive knowledge and understanding of the printed catalogue as well as the electronic systems and methods used in the identification, location, and supplying of parts and assemblies to repair shops and individuals; (2) know…
Characteristics of Competency. Measurement Criteria for Entry-Level Electronics Technician Skills..
ERIC Educational Resources Information Center
Electronic Industries Foundation, Washington, DC.
This supplement to "Raising the Standard" details the knowledge and skills required to successfully achieve competence in each of the tasks identified in the standards manual. It is divided into five sections that correspond to the five skill categories for entry-level electronics technician: additional skills, desirable behavior and work habits,…
Emergency Medical Technician-Ambulance: National Standard Curriculum. Course Guide (Third Edition).
ERIC Educational Resources Information Center
National Highway Traffic Safety Administration (DOT), Washington, DC.
This course guide is intended to assist course coordinators in planning and managing a course to train emergency medical technicians to work with ambulance or other specialized rescue services. Materials are presented to enable students to perform the following functions: recognize the nature and seriousness of the patient's condition or extent of…
NASA Technical Reports Server (NTRS)
Mattson, Marifran; Petrin, Donald A.; Young, John P.
2001-01-01
The study of human factors has had a decisive impact on the aviation industry. However, the entire aviation system often is not considered in researching, training, and evaluating human factors issues especially with regard to safety. In both conceptual and practical terms, we argue for the proactive management of human error from both an individual and organizational systems perspective. The results of a multidisciplinary research project incorporating survey data from professional pilots and maintenance technicians and an exploratory study integrating students from relevant disciplines are reported. Survey findings suggest that latent safety errors may occur during the maintenance discrepancy reporting process because pilots and maintenance technicians do not effectively interact with one another. The importance of interdepartmental or cross-disciplinary training for decreasing these errors and increasing safety is discussed as a primary implication.
Mills, Katelyn E; Han, Zetta; Robbins, Jesse; Weary, Daniel M
2018-01-01
The use of animals in research is controversial and often takes place under a veil of secrecy. Lab animal technicians responsible for the care of animals at research institutions are sometimes described as performing 'dirty work' (i.e. professions that are viewed as morally tainted), and may be stigmatized by negative perceptions of their job. This study assessed if transparency affects public perceptions of lab animal technicians and support for animal research. Participants (n = 550) were randomly assigned to one of six scenarios (using a 3x2 design) that described identical research varying only the transparency of the facility (low, high) and the species used (mice, dogs, cows). Participants provided Likert-type and open-ended responses to questions about the personal characteristics (warmth, competence) of a hypothetical lab technician 'Cathy' and their support for the described research. Quantitative analysis showed participants in the low-transparency condition perceived Cathy to be less warm and were less supportive of the research regardless of animal species. Qualitative responses varied greatly, with some participants expressing support for both Cathy and the research. These results suggest that increasing transparency in lab animal institutions could result in a more positive perception of lab animal researchers and the work that they do.
Mills, Katelyn E.; Han, Zetta; Robbins, Jesse
2018-01-01
The use of animals in research is controversial and often takes place under a veil of secrecy. Lab animal technicians responsible for the care of animals at research institutions are sometimes described as performing ‘dirty work’ (i.e. professions that are viewed as morally tainted), and may be stigmatized by negative perceptions of their job. This study assessed if transparency affects public perceptions of lab animal technicians and support for animal research. Participants (n = 550) were randomly assigned to one of six scenarios (using a 3x2 design) that described identical research varying only the transparency of the facility (low, high) and the species used (mice, dogs, cows). Participants provided Likert-type and open-ended responses to questions about the personal characteristics (warmth, competence) of a hypothetical lab technician ‘Cathy’ and their support for the described research. Quantitative analysis showed participants in the low-transparency condition perceived Cathy to be less warm and were less supportive of the research regardless of animal species. Qualitative responses varied greatly, with some participants expressing support for both Cathy and the research. These results suggest that increasing transparency in lab animal institutions could result in a more positive perception of lab animal researchers and the work that they do. PMID:29466425
Mineta, Kazuaki; Goto, Tomohiro; Wada, Keizo; Tamaki, Yasuaki; Hamada, Daisuke; Higashino, Kosaku; Sairyo, Koichi
2016-08-01
To examine the prevalence of herniation pits (HPs) and to evaluate differences in radiographic features related to femoroacetabular impingement-a hip disorder with abnormal abutment between the acetabulum and femur-between hips with and without HPs in a convenience sample of Japanese patients. We reviewed 1,178 hips on each side (695 men, 483 women; mean age, 58.2 years) using computed tomographic images. The radiological assessments of hip morphology were performed by measuring the lateral center edge angle, acetabular index, acetabular version, alpha angle, and femoral head-neck offset. HPs were defined as the round or oval cystic lesions surrounded by sclerotic bone located below the anterior femoral neck cortex. Intraclass and interclass reproducibility of all radiographic measurements was acceptable (ICC: 0.71-0.98). The prevalence of HPs was 13.9 % in all subjects and was significantly higher in men (18.1 %) than in women (7.8 %; p < 0.001). HPs were larger in male (p < 0.001) and elderly subjects (p < 0.005). In subjects with HPs, the alpha angle was larger and femoral head-neck offset and offset ratio were smaller in the cohort overall and in men. Logistic regression analysis revealed the association between radiological cam-type FAI and HPs in all subjects (odds ratio: 1.86, p < 0.001). We revealed the prevalence of HPs and showed it has a predilection for men in this Japanese cohort. Femoral head asphericity or small head-neck offset was more common in subjects with HPs than those without HPs.
Population structure in Japanese rice population
Yamasaki, Masanori; Ideta, Osamu
2013-01-01
It is essential to elucidate genetic diversity and relationships among even related individuals and populations for plant breeding and genetic analysis. Since Japanese rice breeding has improved agronomic traits such as yield and eating quality, modern Japanese rice cultivars originated from narrow genetic resource and closely related. To resolve the population structure and genetic diversity in Japanese rice population, we used a total of 706 alleles detected by 134 simple sequence repeat markers in a total of 114 cultivars composed of 94 improved varieties and 20 landraces, which are representative and important for Japanese rice breeding. The landraces exhibit greater gene diversity than improved lines, suggesting that landraces can provide additional genetic diversity for future breeding. Model-based Bayesian clustering analysis revealed six subgroups and admixture situation in the cultivars, showing good agreement with pedigree information. This method could be superior to phylogenetic method in classifying a related population. The leading Japanese rice cultivar, Koshihikari is unique due to the specific genome constitution. We defined Japanese rice diverse sets that capture the maximum number of alleles for given sample sizes. These sets are useful for a variety of genetic application in Japanese rice cultivars. PMID:23641181
The purpose of this SOP is to define the steps involved in cleaning the electronic data generated from data entry of the Technician Walk-Through Questionnaire. It applies to electronic data corresponding to the Technician Walk-Through Questionnaire that was scanned and verified ...
ERIC Educational Resources Information Center
Tsukada, Kimiko
2012-01-01
This study aimed to compare the perception of short vs. long vowel contrasts in Japanese and Modern Standard Arabic (MSA) by four groups of listeners differing in their linguistic backgrounds: native Arabic (NA), native Japanese (NJ), non-native Japanese (NNJ) and Australian English (OZ) speakers. The NNJ and OZ groups shared the first language…
Evaluating the effectiveness of an online medical laboratory technician program.
Hansen-Suchy, Kara
2011-01-01
The purpose of this study was to analyze the effectiveness of an online medical laboratory technician program in the academic preparation and development of laboratory professionals. A semi-quantitative comparative research design was used. Several factors were considered in this evaluation. Academic outcomes between online and campus medical laboratory technician (MLT) students was determined by comparing overall and categorical scores on certification exams as well as first time pass rate. Certification exam scores and first time pass rates were also compared to national norms when possible to do so. Demographic data, including age and experience were compared. Additionally, learning styles were assessed to determine if there was a correlation to overall GPA and MLT GPA and if learning styles could be used to predict successful completion of an online Associates of Applied Science. The research was conducted at an academic university located in the mountain west United States. Participants consisted of online and campus students enrolled in a Medical Laboratory Technician program that graduated with their Associate of Applied Science degree between the years 2007-2009. Results of these years were also compared to graduates from 2004-2006 in the same program. Certification performance and first time pass rates were the major outcomes measured. Age and experience were correlated. Online learning styles and GPA were also compared to successful degree completion. The researcher found no significant difference in certification performance with regard to total and categorical scores, and first time pass rates between campus and online MLT students. Online students were slightly older and had more experience working in a laboratory in some capacity. Correlation studies showed significant positive correlation between learning styles, GPA, and successful completion of an Associate of Applied Science degree. When registry scores were compared to the prior cohort of online
Body composition and anthropometry in Japanese and Australian Caucasian males and Japanese females.
Kagawa, Masaharu; Binns, Colin B; Hills, Andrew P
2007-01-01
The total amount and location of fat deposition are important factors in the development of obesity and the metabolic syndrome. To date there have been no reported studies of ethnic and gender differences in body composition and fat distribution patterns in Japanese and Australian young adults. The aim of this study was to assess body composition of young Japanese and Australian Caucasian adults using whole-body dual energy x-ray absorptiometry (DXA) and anthropometry to examine body fat deposition patterns. Body composition of 45 Japanese males and 42 Australian Caucasian males living in Australia (aged 18-40 years) and 139 Japanese females living in Japan (aged 18-27 years) were measured using whole-body DXA scanning and anthropometry. Differences in relationships between BMI and waist circumference (WC), sum of skinfolds (SigmaSF) and %BF obtained from DXA were assessed using multivariate analyses. Distinct gender and ethnic differences (p<0.05) in bone density and waist circumference were observed but no gender differences in BMI and bone mineral content and no ethnic differences in sum of skinfolds and %BF. Both Japanese males and females showed a greater %BF at given BMI, WC and SigmaSF values (p<0.05). The results indicate differences in relationships between %BF and anthropometric measures in young Japanese compared to Caucasians and the importance of population-specific cut-off points for these indices. These findings also have implications for the development of chronic disease and further research, including studies in other Asian countries, is recommended.
The Japanese containerless experiments
NASA Technical Reports Server (NTRS)
Azuma, Hisao
1990-01-01
There are three sets of Japanese containerless experiments. The first is Drop dynamics research. It consists of acoustic levitation and large amplitude drop oscillation. The second is Optical materials processing in an acoustic levitation furnace. And the third is Electrostatic levitator development by two different Japanese companies.
ERIC Educational Resources Information Center
Alberta Advanced Education and Technology, 2012
2012-01-01
The graduate of the Agricultural Equipment Technician apprenticeship program is a certified journeyperson who will be able to: (1) repair, diagnose and maintain by skill and knowledge gained through training and experience any of the working parts of diesel engines as well as the various components of mobile farm machinery; (2) use, competently,…
Rig Technician: Apprenticeship Course Outline. Apprenticeship and Industry Training. 5211.1
ERIC Educational Resources Information Center
Alberta Advanced Education and Technology, 2011
2011-01-01
The graduate of the Rig Technician apprenticeship program is a certified journeyperson who will be able to: (1) take responsibility for personal safety and the safety of others; (2) supervise, coach and train apprentices and floor hands; (3) perform the duties of a motorhand, derrickhand or driller; and (4) perform assigned tasks in accordance…
ERIC Educational Resources Information Center
Alberta Advanced Education and Technology, 2012
2012-01-01
The graduate of the Heavy Equipment Technician apprenticeship program is a certified journeyperson who will be able to: (1) diagnose repair, and maintain by skills and knowledge gained through training and experience any of the working parts of diesel engines as well as the various components of mobile industrial equipment; (2) use, competently,…
Powerline Technician: Apprenticeship Course Outline. Apprenticeship and Industry Training. 2104.4
ERIC Educational Resources Information Center
Alberta Advanced Education and Technology, 2004
2004-01-01
The graduate of the Powerline Technician apprenticeship program is a certified journeyperson who will be able to: (1) responsibly do all work tasks expected of a journeyperson; (2) supervise, train and coach apprentices; (3) use and maintain hand and power tools to the standards of competency and safety required in the trade; (4) construct,…
Supply-Demand Imbalances as Seen by Employers of Engineers and Technicians.
ERIC Educational Resources Information Center
Engineers Joint Council, New York, NY. Engineering Manpower Commission.
As part of its survey of the demand for engineers and technicians conducted in the early part of 1970, the Engineering Manpower Commission asked employers two questions. The first request was: "Please list any curriculum areas in engineering where the number of graduates seems to be badly out of balance with employment needs at current…
V-TECS Guide for Automobile Air Conditioning and Electrical System Technician.
ERIC Educational Resources Information Center
Meyer, Calvin F.; Benson, Robert T.
This curriculum guide provides an outline for an eight-unit course to train automobile air conditioning and electrical system technicians. Each unit focuses on a duty that is composed of a number of performance objectives. For each objective, these materials are provided: a task, a standard of performance of task, source of standard, conditions…
The Role of School Technicians in Promoting Science through Practical Work
ERIC Educational Resources Information Center
Helliar, Anne T.; Harrison, Timothy G.
2011-01-01
This is a review of the role of practical work in UK's secondary school science lessons, the impact that practical work has in the promotion of science, the challenges created through use of non-specialist science teachers and a possible additional role for science technicians. The paper considers how improved deployment of suitably experienced…
Intercultural Communication Problems in Japanese Multinationals.
ERIC Educational Resources Information Center
Nishiyama, Kazuo
Many large Japanese-owned multinational corporations have established successful subsidiaries in the United States, but distinct ethnic and cultural differences have caused communication problems between Japanese managers and American laborers and business people. Many top executives of the Japanese subsidiaries are sent to the United States on a…
Shattering Myths: Japanese American Educational Issues.
ERIC Educational Resources Information Center
Yoshiwara, Florence M.
An historical review of the immigration and resettlement patterns, and a demographic profile of Japanese Americans reveals a myth of the "successful minority." Since the founding of the Japanese American Citizens League in 1928, Japanese Americans have defeated alien land laws, discriminatory immigration quotas, anti-miscengenation laws,…
[History of Japanese Committee for Anatomical Nomenclature].
Kimura, Kunihiko
2008-12-01
This paper records a history of the Japanese Committee of Anatomical Nomenclature since 1990, as a supplement to the previous report (1991), explains a progressing of the edition of Japanese medical terms by the Japanese Association of Medical Sciences and the Ministry of Education, Sciences and Culture, and points out of some problems on terms in Japanese.
The purpose of this SOP is to define the coding strategy for the Technician Walk-Through Questionnaire. This questionnaire was developed for use during the Arizona NHEXAS project and the Border study. Keywords: data; coding; technician walk-through questionnaire.
The U.S.-Mexi...
Huss, Anke; Schaap, Kristel; Kromhout, Hans
2017-07-01
Imaging technicians working with magnetic resonance imaging (MRI) may experience acute effects such as vertigo or dizziness when being exposed. A previous study also reported an increased risk of accidents in MRI exposed staff. We aimed at evaluating commuting accident risk in Dutch imaging technicians. Of invited imaging technicians, 490 (29%) filled in a questionnaire pertaining to (near) accidents when driving or riding a bike, health, lifestyle and work practices. We used logistic regression to evaluate the association between exposure to MRI-related electromagnetic fields and risk of commuting (near) accidents in the year prior to the survey, adjusted for a range of potential confounders. Our cross-sectional study indicated an increased risk of (near) accidents if imaging technicians had worked with MRI in the year prior to the survey (odds ratio OR 2.13, 95%CI 1.23-3.69). Risks were higher in persons who worked with MRI more often (OR 2.32, 95%CI 1.25-4.31) compared to persons who worked sometimes with MRI (OR 1.91, 95%CI 0.98-3.72), and higher in those who had likely experienced higher peak exposures to static and time-varying magnetic fields (OR 2.18, 95%CI 1.06-4.48). The effect was seen on commuting accidents that had occurred on the commute from home to work as well as accidents from work to home or elsewhere. Imaging technicians working with MRI scanners may be at an increased risk of commuting (near) accidents. This result needs confirmation and potential risks for other groups (volunteers, patients) should be investigated. Copyright © 2017 Elsevier Inc. All rights reserved.
Technicians monitor USMP-4 experiments being prepared for flight on STS-87 in the SSPF
NASA Technical Reports Server (NTRS)
1997-01-01
Technicians are monitoring experiments on the United States Microgravity Payload-4 (USMP-4) in preparation for its scheduled launch aboard STS-87 on Nov. 19 from Kennedy Space Center (KSC). USMP-4 experiments are prepared in the Space Station Processing Facility at KSC. The large white vertical cylinder at the right of the photo is the Advanced Automated Directional Solidification Furnace (AADSF ), which is a sophisticated materials science facility used for studying a common method of processing semiconductor crystals called directional solidification. The technician in the middle of the photo is leaning over MEPHISTO, a cooperative American-French investigation of the fundamentals of crystal growth.
Socioeconomic trends in radiology.
Barneveld Binkhuysen, F H
1998-01-01
For radiology the socioeconomic environment is a topic of increasing importance. In addition to the well-known important scientific developments in radiology such as interventional MRI, several other major trends can be recognized: (1) changes in the delivery of health care, in which all kinds of managed care are developing and will influence the practice of radiology, and (2) the process of computerization and digitization. The socioeconomic environment of radiology will be transformed by the developments in managed care, teleradiology and the integration of information systems. If radiologists want to manage future radiology departments they must have an understanding of the changes in the fields of economics and politics that are taking place and that will increasingly influence radiology. Some important and recognizable aspects of these changes will be described here.
Defining quality in radiology.
Blackmore, C Craig
2007-04-01
The introduction of pay for performance in medicine represents an opportunity for radiologists to define quality in radiology. Radiology quality can be defined on the basis of the production model that currently drives reimbursement, codifying the role of radiologists as being limited to the production of timely and accurate radiology reports produced in conditions of maximum patient safety and communicated in a timely manner. Alternately, quality in radiology can also encompass the professional role of radiologists as diagnostic imaging specialists responsible for the appropriate use, selection, interpretation, and application of imaging. Although potentially challenging to implement, the professional model for radiology quality is a comprehensive assessment of the ways in which radiologists add value to patient care. This essay is a discussion of the definition of radiology quality and the implications of that definition.
ERIC Educational Resources Information Center
Tanaka, Sachiko Oda
1995-01-01
Describes the use of English in the media in Japan, focusing on the role and history of English-language newspapers, radio, and television programs, as well as the proliferation of English-language films shown in Japanese cinemas. Discusses the implications of English in the Japanese media. (20 references) (MDM)
Ordinal Expressions in Japanese. Papers in Japanese Linguistics, Vol. 2, No. 1.
ERIC Educational Resources Information Center
Backus, Robert L.
The varied forms and semantic factors of Japanese ordinal expressions are related to one another in a coherent system. In Japanese, the cardinal number form is a numeral compound in construction with a referent. The numeral compound consists of a number and a numeral adjunct. Numeral adjuncts are derived from bound forms, or numeral suffixes, and…
Radiological controls integrated into design
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kindred, G.W.
1995-03-01
Radiological controls are required by law in the design of commercial nuclear power reactor facilities. These controls can be relatively minor or significant, relative to cost. To ensure that radiological controls are designed into a project, the health physicist (radiological engineer) must be involved from the beginning. This is especially true regarding keeping costs down. For every radiological engineer at a nuclear power plant there must be fifty engineers of other disciplines. The radiological engineer cannot be an expert on every discipline of engineering. However, he must be knowledgeable to the degree of how a design will impact the facilitymore » from a radiological perspective. This paper will address how to effectively perform radiological analyses with the goal of radiological controls integrated into the design package.« less
Takada, Kenta
2012-01-01
Seasonal changes in the popularity of fireflies [usually Genji-fireflies (Luciola cruciata Motschulsky) in Japan] and Japanese rhinoceros beetles [Allomyrina dichotoma (Linne)] were investigated to examine whether contemporary Japanese are interested in visible emergence of these insects as seasonal events. The popularity of fireflies and Japanese rhinoceros beetles was assessed by the Google search volume of their Japanese names, “Hotaru” and “Kabuto-mushi” in Japanese Katakana script using Google Trends. The search volume index for fireflies and Japanese rhinoceros beetles was distributed across seasons with a clear peak in only particular times of each year from 2004 to 2011. In addition, the seasonal peak of popularity for fireflies occurred at the beginning of June, whereas that for Japanese rhinoceros beetles occurred from the middle of July to the beginning of August. Thus seasonal peak of each species coincided with the peak period of the emergence of each adult stage. These findings indicated that the Japanese are interested in these insects primarily during the time when the two species are most visibly abundant. Although untested, this could suggest that fireflies and Japanese rhinoceros beetles are perceived by the general public as indicators or symbols of summer in Japan. PMID:26466535
ERIC Educational Resources Information Center
National Council of Technical Schools, Washington, DC.
Prepared by the National Council of Technical Schools, this reference may be used by prospective students , their parents, and counselors in learning the philosophy and objectives, historical background, and present status of technical schools and career opportunities as a technician. Career opportunities included are: (1) Aerospace/Aviation…
ERIC Educational Resources Information Center
Morgan, Daryle Whitney
To assess the status of welding in various manufacturing industries and to ascertain the occupational preparation needed for welding tradesmen, technicians, and technologists, completed questionnaires were obtained from 138 selected industrial specialists. The hypotheses were tested by Freidman's two-way nonparametric analysis of variance and by…
A Canadian Approach to Training Technicians and Technologists In the Earth Sciences.
ERIC Educational Resources Information Center
Watts, Stephen H.
1983-01-01
Describes two- and three-year undergraduate curricula for training earth science technicians at Sir Sanford Fleming College (Canada), emphasizing practical aspects and close student-faculty interaction. List of employment opportunities for geology graduates based on past placement data and geology curriculum outline are provided in tables. (JN)
ERIC Educational Resources Information Center
Alberta Advanced Education and Technology, 2012
2012-01-01
The graduate of the Transport Refrigeration Technician apprenticeship program is a certified journeyperson who will be able: (1) to diagnose repair, maintain and operate transport refrigeration equipment used to heat or cool the load as well as of diesel engines, APUs and other prime movers; (2) to use tools and equipment in order to carry out…
STS-45 Payload Specialist Frimout with technician before JSC egress training
NASA Technical Reports Server (NTRS)
1991-01-01
STS-45 Atlantis, Orbiter Vehicle (OV) 104, Payload Specialist Dirk D. Frimout (European Space Agency (ESA) crewmember from Belgium), wearing launch and entry suit (LES), waits while technician adjusts his parachute harness. Frimout along with other STS-45 crewmembers is preparing for side hatch emergency egress exercises in JSC's Mockup and Integration Laboratory (MAIL) Bldg 9A.
Steendahl, U; Prescott, E; Damsgaard, M T
1992-05-11
The substance methylmethacrylate (MMA) is an organic solvent which is employed inter alii for prostheses which is suspected of being neurotoxic. With the object of illustrating whether there is a connection between exposure to MMA and symptoms of organic dementia, a cross-sectional investigation was carried out on a population consisting of occupationally active dental technicians and opticians (n = 528) and a group of dental technicians who were no longer occupationally active (n = 173). No noteworthy difference in the background variables, apart from age, was observed. Age was taken into consideration in the analysis. The results show a statistically significant increase in the prevalence of the chronic symptoms on increasing exposure. Where the acute symptoms are concerned, the connection is not statistically significant, but a tendency is observed. A chronic symptom index constructed on the basis of 13 questions concerning chronic symptoms is compared with the life exposure and the age. A statistically significant increase in the index was found with exposure to MMA, although not for the oldest age group. The pattern symptoms, presence of bias and other forms of exposure are discussed. It is concluded that this investigation confirms the hypothesis that symptoms of organic dementia have a connection the exposure to MMA. The results support the presumption that MMA causes acute and chronic damage to the central nervous system even with exposure below the safety limits. It is recommended that the occupational environment of dental technicians, including the present safety limits, should be revised.
First Course in Japanese: Character Workbook.
ERIC Educational Resources Information Center
Niwa, Tamako
This character workbook is an introduction to Japanese writing designed to be used in conjunction with Parts One and Two of this introductory course in Japanese. All the "hiragana", several "katakana", and 88 Japanese characters are introduced in this text. The workbook, consisting of 30 lessons, is divided into three parts.…
Developing Instructional Materials for Business Japanese.
ERIC Educational Resources Information Center
Koike, Shohei
Business Japanese should be the study of Japanese language and culture for business communication and should include values and beliefs and institutional constraints on which the Japanese act as well as business etiquette and terminology. Topics to be covered in instruction will vary depending on the role (seller, buyer, or colleague) played by…
Japanese Quality Control Circles.
ERIC Educational Resources Information Center
Nishiyama, Kazuo
In recent years, United States scholars with an interest in international business and organizational communication have begun to notice the success of Japanese "quality control circles." These are small groups, usually composed of seven to ten workers, who are organized at the production levels within most large Japanese factories. A…