The psychopathology of K. Jaspers and K. Schneider as a fundamental method for psychiatry.

PubMed

Huber, Gerd

2002-01-01

The paper is intended to answer the question whether and to what extent the psychopathology in the direction of Karl Jaspers and Kurt Schneider is still meaningful for contemporary psychiatry. K. Schneider developed gradually his "Clinical Psychopathology", proceeding from Jaspers' 4th edition of the "General Psychopathology" (1946). The Jaspersian-Schneiderian approach, aiming more at the elucidation of the patient's own inner experiences than at the observation of behaviour, has overcome the overly objectifying psychiatry of Kraepelin. The history and bearing of Jaspersian-Schneiderian psychopathology on psychiatry, its tenets, positions and concepts, as well as findings and results obtained with the approach are outlined. Recent developments in psychiatry, underestimating or even neglecting the psychopathological approach, are in danger of resulting in a loss of psychopathological competence in research and practice. The essay shows that this psychopathology is far from over, but remains relevant for clinical and biological psychiatry and should lead now, as ever, all other special and basic sciences in psychiatry. The critical methodological reflection and the fundamental psychopathological framework, created by Jaspers and modified and adapted to the requirements of clinical psychiatry by K. Schneider, are also today practically useful and heuristically fruitful. That we need psychopathology for diagnostics, therapy and primary and secondary prevention of schizophrenic psychoses, and also for biological psychiatric research, has been demonstrated by means of a long string of contributions of the last decades. The Jaspersian-Schneiderian approach does not mean definite conclusion and codification, but leaves enough room for new developments, completing, correcting and changing many aspects of classical and present psychiatric views. In ensues that the view of European psychiatrists that we need psychopathology, according to the axiom: "First things first

A to Z with Jasper Johns

ERIC Educational Resources Information Center

Kirker, Sara Schmickle

2008-01-01

One contemporary artist that kindergarten students can easily relate to is Jasper Johns. In this article, the author discusses how she introduced John's numeric and alphabetic paintings to her kindergarten students. The young artists were amazed that art can be created from the familiar symbols that they are learning to make in their regular…

Geologic map of the Jasper Quadrangle, Newton and Boone counties, Arkansas

USGS Publications Warehouse

Hudson, M.R.; Murray, K.E.; Pezzutti, Deborah

2001-01-01

This digital geologic map compilation presents new polygon (i.e., geologic map unit contacts), line (i.e., fault, fold axis, and structure contour), and point (i.e., structural attitude, contact elevations) vector data for the Jasper 7 1/2' quadrangle in northern Arkansas. The map database, which is at 1:24,000-scale resolution, provides geologic coverage of an area of current hydrogeologic, tectonic, and stratigraphic interest. The Jasper quadrangle is located in northern Newton and southern Boone Counties about 20 km south of the town of Harrison. The map area is underlain by sedimentary rocks of Ordovician, Mississippian, and Pennsylvanian age that were mildly deformed by a series of normal and strike-slip faults and folds. The area is representative of the stratigraphic and structural setting of the southern Ozark Dome. The Jasper quadrangle map provides new geologic information for better understanding groundwater flow paths in and adjacent to the Buffalo River watershed.

Plan of Action: JASPER Management Prestart Review (Surrogate Material Experiment)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cooper, W E

2000-12-05

The Lawrence Livermore National Laboratory (LLNL) Joint Actinide Shock Physics Experimental Research (JASPER) Facility is being developed at the Nevada Test Site (NTS) to conduct shock physics experiments on special nuclear material and other actinide materials. JASPER will use a two-stage, light-gas gun to shoot projectiles at actinide targets. Projectile velocities will range from 1 to 8 km/s, inducing pressures in the target material up to 6 Mbar. The JASPER gas gun has been designed to match the critical dimensions of the two-stage, light-gas gun in Building 341 of LLNL. The goal in copying the LLNL gun design is tomore » take advantage of the extensive ballistics database that exists and to minimize the effort spent on gun characterization in the initial facility start-up. A siting study conducted by an inter-Laboratory team identified Able Site in Area 27 of the NTS as the best location for the JASPER gas gun. Able Site consists of three major buildings that had previously been used to support the nuclear test program. In April 1999, Able Site was decommissioned as a Nuclear Explosive Assembly Facility and turned back to the DOE for other uses. Construction and facility modifications at Able Site to support the JASPER project started in April 1999 and were completed in September 1999. The gas gun and the secondary confinement chamber (SCC) were installed in early 2000. During the year, all facility and operational systems were brought on line. Initial system integration demonstrations were completed in September 2000. The facility is anticipated to be operational by August 2001, and the expected life cycle for the facility is 10 years. LLNL Nevada Experiments and Operations (N) Program has established a Management Prestart Review (MPR) team to determine the readiness of the JASPER personnel and facilities to initiate surrogate-material experiments. The review coincides with the completion of authorization-basis documents and physical subsystems, which have

Plan of Action: JASPER Management Prestart Review (Surrogate Material Experiments)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cooper, W.E.

2000-09-29

The Lawrence Livermore National Laboratory (LLNL) Joint Actinide Shock Physics Experimental Research (JASPER) Facility is being developed at the Nevada Test Site (NTS) to conduct shock physics experiments on special nuclear material and other actinide materials. JASPER will use a two-stage, light-gas gun to shoot projectiles at actinide targets. Projectile velocities will range from 1 to 8 km/s, inducing pressures in the target material up to 6 Mbar. The JASPER gas gun has been designed to match the critical dimensions of the two-stage, light-gas gun in Building 341 of LLNL. The goal in copying the LLNL gun design is tomore » take advantage of the extensive ballistics database that exists and to minimize the effort spent on gun characterization in the initial facility start-up. A siting study conducted by an inter-Laboratory team identified Able Site in Area 27 of the NTS as the best location for the JASPER gas gun. Able Site consists of three major buildings that had previously been used to support the nuclear test program. In April 1999, Able Site was decommissioned as a Nuclear Explosive Assembly Facility and turned back to the DOE for other uses. Construction and facility modifications at Able Site to support the JASPER project started in April 1999 and were completed in September 1999. The gas gun and the secondary confinement chamber (SCC) were installed in early 2000. During the year, all facility and operational systems were brought on line. Initial system integration demonstrations were completed in September 2000. The facility is anticipated to be operational by August 2001, and the expected life cycle for the facility is 10 years. LLNL Nevada Experiments and Operations (N) Program has established a Management Prestart Review (MPR) team to determine the readiness of the JASPER personnel and facilities to initiate surrogate-material experiments. The review coincides with the completion of authorization-basis documents and physical subsystems, which have

Jasper Seamount: seven million years of volcanism

USGS Publications Warehouse

Pringle, M.S.; Staudigel, H.; Gee, J.

1991-01-01

Jasper Seamount is a young, mid-sized (690 km3) oceanic intraplate volcano located about 500 km west-southwest of San Diego, California. Reliable 40Ar/39Ar age data were obtained for several milligram-sized samples of 4 to 10 Ma plagioclase by using a defocused laser beam to clean the samples before fusion. Gee and Staudigel suggested that Jasper Seamount consists of a transitional to tholeiitic shield volcano formed by flank transitional series lavas, overlain by flank alkalic series lavas and summit alkalic series lavas. Twenty-nine individual 40Ar/39Ar laser fusion analyses on nine samples confirm the stratigraphy: 10.3-10.0 Ma for the flank transitional series, 8.7-7.5 Ma for the flank alkalic series, and 4.8-4.1 Ma for the summit alkalic series. The alkalinity of the lavas clearly increases with time, and there appear to be 1 to 3 m.y. hiatuses between each series. -from Authors

[Jaspers and the problem of understanding: a plea for revision].

PubMed

Brücher, K

2012-04-01

Understanding (Verstehen), as far as it is discussed explicitly in psychiatry, is based on Dilthey's dichotomy "nature we explain, the life of the soul we understand ( , 144). According to this doctrine, understanding is concerned with a person's inner life and consequently, its method consists in putting oneself in the other's position and reliving their experience. Jaspers' concept of understanding - which is regarded as definitive for psychiatry by advocates and opponents alike - is commonly interpreted according to this tradition as well. I shall argue here that this position does not stand up to scrutiny. It is a mistake to simplify Dilthey's concept of understanding to a form of mere psychologism. In fact, Jaspers practically tore this position down. In his own account, by contrast, he utilises Max Weber and Rickert to established a third realm in addition to a person's inner life on the one hand and their bodily nature on the other: the realm of the objective products of the human mind. It is this dimension that is essential for understanding. Such a transition from the dichotomy of explaining and understanding to a three-valued logic requires a radical rethinking of the traditional notion of understanding. Jaspers meets this demand but he does so only implicitly and not always consistently so that it might easily be missed. It is nonetheless crucial to see that Jaspers in fact rejects the hermeneutics of empathy which are commonly attributed to him and for which he is often criticised. In conclusion of this essay, I will suggest some implications of this - often overlooked - distinction for psychiatry and psychology. © Georg Thieme Verlag KG Stuttgart · New York.

Preschool based JASPER intervention in minimally verbal children with autism: pilot RCT.

PubMed

Goods, Kelly Stickles; Ishijima, Eric; Chang, Ya-Chih; Kasari, Connie

2013-05-01

In this pilot study, we tested the effects of a novel intervention (JASPER, Joint Attention Symbolic Play Engagement and Regulation) on 3 to 5 year old, minimally verbal children with autism who were attending a non-public preschool. Participants were randomized to a control group (treatment as usual, 30 h of ABA-based therapy per week) or a treatment group (substitution of 30 min of JASPER treatment, twice weekly during their regular program). A baseline of 12 weeks in which no changes were noted in core deficits was followed by 12 weeks of intervention for children randomized to the JASPER treatment. Participants in the treatment group demonstrated greater play diversity on a standardized assessment. Effects also generalized to the classroom, where participants in the treatment group initiated more gestures and spent less time unengaged. These results provide further support that even brief, targeted interventions on joint attention and play can improve core deficits in minimally verbal children with ASD.

Educator's Guide to Two Towns of Jasper

ERIC Educational Resources Information Center

Dow, Whitney; Williams, Marco

2004-01-01

In June 1998, news of a horrific murder outraged the nation and the world. Three white men chained James Byrd, Jr., a black man, to the back of a truck and dragged him to his death just outside Jasper, Texas. The crime took place at a time when many people believed that "America was moving beyond race." The crime shattered that notion. Or did it?…

Postextraction Alveolar Ridge Preservation: Biological Basis and Treatments

PubMed Central

Pagni, Giorgio; Pellegrini, Gaia; Giannobile, William V.; Rasperini, Giulio

2012-01-01

Following tooth extraction, the alveolar ridge undergoes an inevitable remodeling process that influences implant therapy of the edentulous area. Socket grafting is a commonly adopted therapy for the preservation of alveolar bone structures in combination or not with immediate implant placement although the biological bases lying behind this treatment modality are not fully understood and often misinterpreted. This review is intended to clarify the literature support to socket grafting in order to provide practitioners with valid tools to make a conscious decision of when and why to recommend this therapy. PMID:22737169

Geochemistry and jasper beds from the Ordovician Løkken ophiolite, Norway: origin of proximal and distal siliceous exhalites

USGS Publications Warehouse

Grenne, Tor; Slack, John F.

2005-01-01

Stratiform beds of jasper (hematitic chert), composed essentially of SiO2 (69-95 wt %) and Fe2O3 (3-25 wt %), can be traced several kilometers along strike in the Ordovician L??kken ophiolite, Norway. These siliceous beds are closely associated with volcanogenic massive sulfide (VMS) deposits and are interpreted as sea-floor gels that were deposited by fallout from hydrothermal plumes in silica-rich seawater, in which plume-derived Fe oxyhydroxide particles promoted flocculation and rapid settling of large (???200 ??m) colloidal particles of silica-iron oxyhydroxide. Concentrations of chalcophile elements in the jasper beds are at the parts per million level implying that sulfide particle fallout was insignificant and that the Si-Fe gel-forming plumes were mainly derived from intermediate- (100??-250??C) to high-temperature (>250??) white smoker-type vents with high Fe/S ratios. The interpreted setting is similar to that of the Lau basin, where high-temperature (280??-334??C) white smoker venting alternates or overlaps with sulfide mound-forming black smoker venting. Ratios of Al, Sc, Th, Hf, and REE to iron are very low and show that the detrital input was <0.1 percent of the bulk jasper. Most jasper beds are enriched in U, V, P, and Mo relative to the North American Shale Composite, reflecting a predominantly seawater source, whereas REE distribution patterns (positive Eu and negative Ce anomalies) reflect variable mixing of hydrothermal solutions with oxic seawater at dilution ratios of ???102 to 104. Trace element variations in the gel precursor to the jasper are thought to have been controlled by coprecipitation and/or adsorption by Fe oxyhydroxide particles that formed by the oxidation of hydrothermal Fe2+ within the variably seawater-diluted hydrothermal plume(s). Thick jasper layers near the H??ydal VMS orebody show distinct positive As/Fe and Sb/Fe anomalies that are attributed to near-vent rapid settling of Si-Fe particles derived from As- and Sb

Hannah Arendt and Karl Jaspers: The Time of Friendship

ERIC Educational Resources Information Center

Nixon, Jon

2016-01-01

This paper provides an introduction to the enduring friendship between Hannah Arendt and Karl Jaspers. It shows how their intellectual development as public educators was sustained by their ongoing dialogue which flourished not in spite of but because of their huge differences of circumstance and personality. This friendship between two renowned…

Preschool Deployment of Evidence-Based Social Communication Intervention: JASPER in the Classroom.

PubMed

Chang, Ya-Chih; Shire, Stephanie Y; Shih, Wendy; Gelfand, Carolyn; Kasari, Connie

2016-06-01

Few research-developed early intervention models have been deployed to and tested in real world preschool programs. In this study, teaching staff implemented a social communication modularized intervention, JASPER, in their daily program. Sixty-six preschool children with autism in twelve classrooms (12 teachers) were randomized to receive immediate JASPER training (IT) or were waitlisted (WL) for 3 months with a 1-month follow up. Measures of core deficits (initiations of joint engagement, joint attention gestures and language, play skills) and standardized cognitive measures were improved for IT over WL children. IT teachers achieved and maintained high fidelity. Teachers can implement evidence-based interventions with significant improvements in core deficits of their children with ASD.

Karl Jaspers on the disease entity: Kantian ideas and Weberian ideal types.

PubMed

Walker, Chris

2014-09-01

Jaspers' nosology is indebted to Immanuel Kant's theory of knowledge. He drew the distinction of form and content from the Transcendental Analytic of Kant's Critique of Pure Reason. The distinction is universal to all knowledge, including psychopathology. Individual experience is constituted by a form or category of the Understanding to give a determinate or knowable object classified into the generic type of a real disease entity. The application of form and content is limited by the boundaries of experience. Beyond this boundary are wholes whose conception requires Ideas of reason drawn from the Transcendental Dialectic. Wholes are regulated by Ideas of reason to give an object or schema of the Idea collected into ideal types of an ideal typical disease entity. Jaspers drew ideal types from Max Weber's social theory. He anticipated that, as knowledge advanced, ideal typical disease entities would become real disease entities. By 1920, this had been the destiny of general paralysis as knowledge of its neuropathology, serology and microbiology emerged. As he presented the final edition of General Psychopathology in 1946, Jaspers was anticipating the transition of schizophrenia from ideal typical to real disease entity. Almost 70 years later, with knowledge of its aetiology still unclear, schizophrenia remains marooned as an ideal typical disease entity - still awaiting that crucial advance! © The Author(s) 2014.

Third report on the Oak Ridge K-25 Site Biological Monitoring and Abatement Program for Mitchell Branch

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hinzman, R.L.; Adams, S.M.; Ashwood, T.L.

1995-08-01

As a condition of the modified National Pollutant Discharge Elimination System (NPDES) permit issued to the Oak Ridge Gaseous Diffusion Plant (ORGDP; now referred to as the Oak Ridge K-25 Site) on September 11, 1986, a Biological Monitoring and Abatement Program (BMAP) was developed for the receiving stream (Mitchell Branch or K-1700 stream). On October 1, 1992, a renewed NPDES permit was issued for the K-25 Site. A biological monitoring plan was submitted for Mitchell Branch, Poplar Creek, Poplar Creek Embayment of the Clinch River and any unnamed tributaries of these streams. The objectives of BMAP are to (1) demonstratemore » that the effluent limitations established for the Oak Ridge K-25 Site protect and maintain the use of Mitchell Branch for growth and propagation of fish and other aquatic life and (2) document the effects on stream biota resulting from operation of major new pollution abatement facilities, including the Central Neutralization Facility (CNF) and the Toxic Substances Control Act (TSCA) incinerator. The BMAP consists of four tasks: (1) toxicity monitoring; (2) bioaccumulation monitoring; (3) assessment of fish health; and (4) instream monitoring of biological communities, including benthic macroinvertebrates and fish. This document, the third in a series, reports on the results of the Oak Ridge K-25 Site BMAP; it describes studies that were conducted over various periods of time between June 1990 and December 1993, although monitoring conducted outside this time period is included, as appropriate.« less

[Resilience and Spirituality Considered from Viewpoint of Existential Philosophy of Karl Jaspers].

PubMed

Kato, Satoshi

2015-01-01

After publishing "General Psychopathology" in 1913, Jaspers turned his attention to serious philosophical contemplation. Using the term grenzsituation (limit situation) as a key concept, he first presented a framework to shed light on the pathology of both individuals and groups, and this led on to include the perspective of resilience. He then used three more key concepts, transzendenz (transcendence), chiffer (cipher), and unverstädliche (unintelligible) to offer a framework to focus on the possibilities of human existence. In the field of medicine, this is useful to support a spiritual approach which is discussed in palliative treatment. The philosophy developed by Jaspers can be considered as indicating a practical form of guidance for people to find self-support from a limit situation where they have lost their own support, and finally, come to a degree of mutual acceptance. Mutual acceptance is made possible at the level of ciphers, in which specific meaning remains undefined, by directing both the self and the other toward a state of "transcendence". Nowadays there is a trend for those chaplains involved in spiritual care from a specialist point of view to be trained to effectively transcend any difference in religious belief. As a basic premise, the author considers there is a need to once again return to a state before the start of individual religions, and stand on a cross-sectional ground level, an area which could be regarded as common to all religions. When conducting such a task, in the author's view, the restrained spirituality that Jaspers expounded is thought-provoking.

Report on the biological monitoring program for Bear Creek at the Oak Ridge Y-12 Plant, Oak Ridge, Tennessee, 1989-1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hinzman, R.L.; Beauchamp, J.J.; Cada, G.F.

1996-04-01

The Bear Creek Valley watershed drains the area surrounding several closed Oak Ridge Y-12 Plant waste disposal facilities. Past waste disposal practices in the Bear Creek Valley resulted in the contamination of Bear Creek and consequent ecological damage. Ecological monitoring by the Biological Monitoring and Abatement Program (BMAP) was initiated in the Bear Creek watershed in May 1984 and continues at present. Studies conducted during the first year provided a detailed characterization of the benthic invertebrate and fish communities in Bear Creek. The initial characterization was followed by a biological monitoring phase in which studies were conducted at reduced intensities.

Second report on the Oak Ridge K-25 Site Biological Monitoring and Abatement Program for Mitchell Branch

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, J.G.; Adams, S.M.; Hinzman, R.L.

1994-03-01

On September 11, 1986, a modified National Pollutant Discharge Elimination System permit was issued for the Oak Ridge Gaseous Diffusion Plant (ORGDP; now referred to as the Oak Ridge K-25 Site), a former uranium-enrichment production facility. As required in Part III of the permit, a Biological Monitoring and Abatement Program (BMAP) was developed for the biological monitoring of Mitchell Branch (K-1700 stream) and submitted for approval to the US EPA and the Tennessee Department of Environment and Conservation. The plan described biomonitoring activities that would be conducted over the duration of the permit. The objectives of the BMAP are tomore » demonstrate that the effluent limitations established for the Oak Ridge K-25 Site protect and maintain the use of Mitchell Branch for growth and propagation of fish and other aquatic life, and to document the effects on stream biota resulting from operation of major new pollution abatement facilities. The BMAP consists of four tasks: ambient toxicity testing; bioaccumulation studies; biological indicator studies; and ecological surveys of stream communities, including benthic macroinvertebrates and fish. This document is the second in a series of reports presenting the results of the studies that were conducted over various periods of time between August 1987 and June 1990.« less

Preschool Deployment of Evidence-Based Social Communication Intervention: JASPER in the Classroom

ERIC Educational Resources Information Center

Chang, Ya-Chih; Shire, Stephanie Y.; Shih, Wendy; Gelfand, Carolyn; Kasari, Connie

2016-01-01

Few research-developed early intervention models have been deployed to and tested in real world preschool programs. In this study, teaching staff implemented a social communication modularized intervention, JASPER, in their daily program. Sixty-six preschool children with autism in twelve classrooms (12 teachers) were randomized to receive…

Flood-inundation maps for the Patoka River in and near Jasper, southwestern Indiana

USGS Publications Warehouse

Fowler, Kathleen K.

2018-01-23

Digital flood-inundation maps for a 9.5-mile reach of the Patoka River in and near the city of Jasper, southwestern Indiana (Ind.), from the streamgage near County Road North 175 East, downstream to State Road 162, were created by the U.S. Geological Survey (USGS) in cooperation with the Indiana Department of Transportation. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science web site at https://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage Patoka River at Jasper, Ind. (station number 03375500). The Patoka streamgage is located at the upstream end of the 9.5-mile river reach. Near-real-time stages at this streamgage may be obtained from the USGS National Water Information System at https://waterdata.usgs.gov/ or the National Weather Service Advanced Hydrologic Prediction Service at http://water.weather.gov/ahps/, although flood forecasts and stages for action and minor, moderate, and major flood stages are not currently (2017) available at this site (JPRI3).Flood profiles were computed for the stream reach by means of a one-dimensional step-backwater model. The hydraulic model was calibrated by using the most current stage-discharge relation at the Patoka River at Jasper, Ind., streamgage and the documented high-water marks from the flood of April 30, 2017. The calibrated hydraulic model was then used to compute five water-surface profiles for flood stages referenced to the streamgage datum ranging from 15 feet (ft), or near bankfull, to 19 ft. The simulated water-surface profiles were then combined with a geographic information system digital elevation model (derived from light detection and ranging [lidar] data having a 0.98 ft vertical accuracy and 4.9 ft horizontal resolution) to delineate the area flooded at each water level.The availability of these flood-inundation maps, along with real

Neutron Imaging at the Oak Ridge National Laboratory: Application to Biological Research

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bilheux, Hassina Z; Cekanova, Maria; Bilheux, Jean-Christophe

2014-01-01

The Oak Ridge National Laboratory Neutron Sciences Directorate (NScD) has recently installed a neutron imaging beamline at the High Flux Isotope Reactor (HFIR) cold guide hall. The CG-1D beamline supports a broad range of user research spanning from engineering to material research, energy storage, additive manufacturing, vehicle technologies, archaeology, biology, and plant physiology. The beamline performance (spatial resolution, field of view, etc.) and its utilization for biological research are presented. The NScD is also considering a proposal to build the VENUS imaging beamline (beam port 10) at the Spallation Neutron Source (SNS). Unlike CG-1D which provides cold neutrons, VENUS willmore » offer a broad range of neutron wavelengths, from epithermal to cold, and enhanced contrast mechanisms. This new capability will also enable the imaging of thicker biological samples than is currently available at CG-1D. A brief overview of the VENUS capability for biological research is discussed.« less

First report on the Oak Ridge K-25 Site Biological Monitoring and Abatement Program for Mitchell Branch

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, J.G.; Adams, S.M.; Kszos, L.A.

1993-08-01

A modified National Pollutant Discharge Elimination System permit was issued to the Oak Ridge Gaseous Diffusion Plant (now referred to as the Oak Ridge K-25 Site) on September 11, 1986. The Oak Ridge K-25 Site is a former uranium-enrichment production facility, which is currently managed by Martin Marietta Energy Systems, Inc. for the US Department of Energy. As required in Part III (L) of that permit, a plan for the biological monitoring of Mitchell Branch (K-1700 stream) was prepared and submitted for approval to the US Environmental Protection Agency and the Tennessee Department of Environment and Conservation [formerly the Tennesseemore » Department of Health and Environment (Loar et al. 1992b)]. The K-25 Site Biological Monitoring and Abatement Program (BMAP) described biomonitoring activities that would be conducted over the duration of the permit. Because it was anticipated that the composition of existing effluent streams entering Mitchell Branch would be altered shortly after the modified permit was issued, sampling of the benthic invertebrate and fish communities (Task 4 of BMAP) was initiated in August and September 1986 respectively.« less

Preschool Based JASPER Intervention in Minimally Verbal Children with Autism: Pilot RCT

ERIC Educational Resources Information Center

Goods, Kelly Stickles; Ishijima, Eric; Chang, Ya-Chih; Kasari, Connie

2013-01-01

In this pilot study, we tested the effects of a novel intervention (JASPER, Joint Attention Symbolic Play Engagement and Regulation) on 3 to 5 year old, minimally verbal children with autism who were attending a non-public preschool. Participants were randomized to a control group (treatment as usual, 30 h of ABA-based therapy per week) or a…

Embryology meets molecular biology: Deciphering the apical ectodermal ridge.

PubMed

Verheyden, Jamie M; Sun, Xin

2017-09-15

More than sixty years ago, while studying feather tracks on the shoulder of the chick embryo, Dr. John Saunders used Nile Blue dye to stain the tissue. There, he noticed a darkly stained line of cells that neatly rims the tip of the growing limb bud. Rather than ignoring this observation, he followed it up by removing this tissue and found that it led to a striking truncation of the limb skeletons. This landmark experiment marks the serendipitous discovery of the apical ectodermal ridge (AER), the quintessential embryonic structure that drives the outgrowth of the limb. Dr. Saunders continued to lead the limb field for the next fifty years, not just through his own work, but also by inspiring the next generation of researchers through his infectious love of science. Together, he and those who followed ushered in the discovery of fibroblast growth factor (FGF) as the AER molecule. The seamless marriage of embryology and molecular biology that led to the decoding of the AER serves as a shining example of how discoveries are made for the rest of the developmental biology field. Copyright © 2017 Elsevier Inc. All rights reserved.

A community responds to collective trauma: an ecological analysis of the James Byrd murder in Jasper, Texas.

PubMed

Wicke, Thomas; Silver, Roxane Cohen

2009-12-01

The brutal murder of James Byrd Jr. in June 1998 unleashed a storm of media, interest groups, high profile individuals and criticism on the Southeast Texas community of Jasper. The crime and subsequent response-from within the community as well as across the world-engulfed the entire town in a collective trauma. Using natural disaster literature/theory and employing an ecological approach, Jasper, Texas was investigated via an interrupted time series analysis to identify how the community changed as compared to a control community (Center, Texas) on crime, economic, health, educational, and social capital measures collected at multiple pre- and post-crime time points between 1995 and 2003. Differences-in-differences (DD) analysis revealed significant post-event changes in Jasper, as well as a surprising degree of resilience and lack of negative consequences. Interviews with residents conducted between March 2005 and 2007 identified how the community responded to the crisis and augmented quantitative findings with qualitative, field-informed interpretation. Interviews suggest the intervention of external organizations exacerbated the severity of the events. However, using strengths of specific local social institutions-including faith based, law enforcement, media, business sector and civic government organizations-the community effectively responded to the initial threat and to the potential negative ramifications of external entities.

PRODUCTION AND BIOLOGICAL SIGNIFICANCE OF METHYLATED TRIVALENT ARSENICALS

EPA Science Inventory

PRODUCTION AND BIOLOGICAL SIGNIFICANCE OF METHYLATED TRIVALENT ARSENICALS

Miroslav Styblo1,2,*, Zuzana Drobna1, Felecia S. Walton1, Ilona Jaspers1,2, Shan Lin3,
Stephen B. Waters3, David J. Thomas4

1Department of Pediatrics, 2Center for Environmental Medicine an...

Impacts of Volcanic Eruptions and Disturbances on Mid-Ocean Ridge Biological Communities

NASA Astrophysics Data System (ADS)

Shank, T. M.

2009-12-01

Understanding ecological processes in mid-ocean ridge benthic environments requires a knowledge of the temporal and spatial scales over which those processes take place. Over the past 17 years, the detection and now “direct observation” of more than nine seafloor eruptions and even more numerous and diverse geologic disturbances (e.g., dyking and cracking events) have provided a broad spectrum of perturbating seafloor phenomena that serve as key agents for creating new vent habitat, providing bursts of nutrients, supporting blooms of microbial and macrobiological communities, imparting magmatic/hydrothermal fluxes, controlling fluid geochemical composition, altering the successional stage of faunal communities, guiding the temporal and spatial scales of local extinction and recolonization, and for directing the evolution of physiological adaptations. Eruptions have now been documented on the East Pacific Rise, Southern Mid-Atlantic Ridge, Gakkel Ridge, Galapagos Rift, CoAxial, Northwest Rota, West Mata, and Loihi Seamounts, representing diverse emergent eruptive styles, from explosive pyroclastic deposits to thin lava flows, these processes are occurring in different biogeographic regions hosting different regional species pools. As such, not only do these eruptions provide a method of establishing a “time-zero” with which to construct manipulative temporal experiments, but also provide a contextual framework with which to interpret the affect eruptions and disturbance have on ecological interactions in different biogeographic regions of the world, and the timescales over which they vary. The temporal and spatial impact of these different eruptive styles in relation to the alteration of biological community structure will be discussed.

One hundred years of limited impact of Jaspers' General Psychopathology on US psychiatry.

PubMed

de Leon, Jose

2014-02-01

Jaspers, a German psychiatrist, published General Psychopathology in 1913. Jaspers, Schneider, and Mayer-Gross were members of the Heidelberg school. General Psychopathology, indirectly through Schneider's and Mayer-Gross' textbooks and directly by its English translation in 1963, led to a narrow set of schizophrenia criteria in the United Kingdom. General Psychopathology had very limited direct impact on US psychiatry, which adopted a broader schizophrenia definition. The difference between UK and US schizophrenia was a key element in the Diagnostic and Statistical Manual of Mental Disorders, Third Edition, and the neo-Kraepelinian revolution. General Psychopathology contains two essential interrelated ideas: a) psychiatry is a hybrid scientific discipline that must combine natural and social science methods that provide an explanation of illness that follows the medical model and an understanding of psychiatric abnormalities that are variations of human living, respectively, and b) psychiatric disorders are heterogeneous. Berrios' ideas on the hybridity of psychiatry in the United Kingdom and McHugh's ideas on psychiatric diagnoses in the United States can be considered neo-Jasperian approaches because they further elaborate these two Jasperian concepts in the late 20th century.

Dentoskeletal changes induced by the Jasper jumper and the activator-headgear combination appliances followed by fixed orthodontic treatment.

PubMed

Lima, Karina Jerônimo Rodrigues Santiago de; Henriques, José Fernando Castanha; Janson, Guilherme; Pereira, Suelen Cristina da Costa; Neves, Leniana Santos; Cançado, Rodrigo Hermont

2013-05-01

The aim of this study was to compare the dentoskeletal changes of patients with Class II Division 1 malocclusion treated with either the Jasper jumper appliance or the activator-headgear combination, both associated with fixed appliances. The sample comprised 72 subjects with Class II Division 1 malocclusion divided into 3 groups: group 1 included 25 subjects treated with fixed appliances and the force modules of the Jasper jumper at an initial mean age of 12.72 years, group 2 included 25 subjects treated with the activator-headgear combination followed by fixed appliances at an initial mean age of 11.07 years, and group 3 included 22 untreated subjects at an initial mean age of 12.67 years. Initial cephalometric characteristics and dentoskeletal changes were compared with analysis of variance. Both experimental groups had similar dentoskeletal changes: restrictive effect on the maxilla, clockwise mandibular rotation and a slight increase in anterior face height, retrusion of the maxillary incisors, distalization of the maxillary molars, protrusion of the mandibular incisors, extrusion of the mandibular molars, and significant improvements of the maxillomandibular relationship, overjet, overbite, and the molar relationship. The effects of the Jasper jumper and the activator-headgear combination followed by fixed orthodontic appliances were similar in Class II malocclusion treatment. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Bedded jaspers of the Ordovician Løkken ophiolite, Norway: seafloor deposition and diagenetic maturation of hydrothermal plume-derived silica-iron gels

USGS Publications Warehouse

Grenne, Tor; Slack, John F.

2003-01-01

The jaspers are interpreted to record colloidal fallout from one or more hydrothermal plumes, followed by maturation (ageing) of an Si-Fe-oxyhydroxide gel, on and beneath the Ordovician sea floor. Small hematitic filaments in the jaspers reflect bacteria-catalysed oxidation of Fe2+ within the plume. The larger tubular filaments resulted from either microbial activity or inorganic self-organized mineral growth of Fe-oxyhydroxide within the Si-Fe-oxyhydroxide gel after deposition on the sea floor, prior to more advanced maturation of the gel as represented by the spheroidal and botryoidal silica-hematite textures. Bleaching and hematite±epidote growth are interpreted to reflect heat and fluids generated during deposition of basaltic sheet flows on top of the gels.

[The Concept of Typology in Psychiatry in the Context of Historical Contributions of Max Weber and Karl Jaspers].

PubMed

Jäger, M; Becker, T; Wigand, M E

2016-08-01

Against the background of Max Weber's and Karl Jaspers' outstanding historical contributions to the conceptual development of different typologies, the importance of a psychiatric typology is examined. The term "ideal type" was introduced into social science by Weber as an analytical construct to describe and classify cultural phenomena. This concept was adopted for the psychiatric context by Jaspers who proposed to establish a typological system in the field of psychotic disturbances without an organic correlate. He emphasized the importance of the course of psychopathological symptoms for such a typological system. The concept of typology can be regarded as a promising heuristic approach in psychiatry, providing a classification system for complex psychopathological symptoms. Even though several historic typologies exist in psychopathology, their usefulness in the fields of therapy and prognosis needs to be critically assessed. Also, new typologies will have to be developed, taking into account neurobiological knowledge now available. © Georg Thieme Verlag KG Stuttgart · New York.

Characteristics of Hydrothermal Mineralization in Ultraslow Spreading Ridges

NASA Astrophysics Data System (ADS)

Zhou, H.; Yang, Q.; Ji, F.; Dick, H. J.

2014-12-01

Hydrothermal activity is a major component of the processes that shape the composition and structure of the ocean crust, providing a major pathway for the exchange of heat and elements between the Earth's crust and oceans, and a locus for intense biological activity on the seafloor and underlying crust. In other hand, the structure and composition of hydrothermal systems are the result of complex interactions between heat sources, fluids, wall rocks, tectonic controls and even biological processes. Ultraslow spreading ridges, including the Southwest Indian Ridge, the Gakkel Ridge, are most remarkable end member in plate-boundary structures (Dick et al., 2003), featured with extensive tectonic amagmatic spreading and frequent exposure of peridotite and gabbro. With intensive surveys in last decades, it is suggested that ultraslow ridges are several times more effective than faster-spreading ridges in sustaining hydrothermal activities. This increased efficiency could attributed to deep mining of heat and even exothermic serpentinisation (Baker et al., 2004). Distinct from in faster spreading ridges, one characteristics of hydrothermal mineralization on seafloor in ultraslow spreading ridges, including the active Dragon Flag hydrothermal field at 49.6 degree of the Southwest Indian Ridge, is abundant and pervasive distribution of lower temperature precipitated minerals ( such as Fe-silica or silica, Mn (Fe) oxides, sepiolite, pyrite, marcasite etc. ) in hydrothermal fields. Structures formed by lower temperature activities in active and dead hydrothermal fields are also obviously. High temperature precipitated minerals such as chalcopyrite etc. are rare or very limited in hydrothermal chimneys. Distribution of diverse low temperature hydrothermal activities is consistence with the deep heating mechanisms and hydrothermal circulations in the complex background of ultraslow spreading tectonics. Meanwhile, deeper and larger mineralization at certain locations along the

First report on the Oak Ridge Y-12 Plant Biological Monitoring and Abatement Program for East Fork Poplar Creek

DOE Office of Scientific and Technical Information (OSTI.GOV)

Loar, J.M.; Adams, S.M.; Allison, L.J.

1992-07-01

As stipulated in the National Pollutant Discharge Elimination System (NPDES) permit issued to the Oak Ridge Y-12 Plant on May 24, 1985, a Biological Monitoring and Abatement Program (BMAP) was developed for the receiving stream, East Fork Poplar Creek (EFPC). The objectives of the BMAP are (1) to demonstrate that the current effluent limitations established for the Oak Ridge Y-12 Plant protect the uses of EFPC (e.g., the growth and propagation of fish and aquatic life), as designated by the Tennessee Department of Environment and Conservation (TDEC) [formerly the Tennessee Department of Health and Environment (TDHE)], and (2) to documentmore » the ecological effects resulting from implementation of a water pollution control program that includes construction of several large wastewater treatment facilities. The BMAP consists of four major tasks: (1) ambient toxicity testing, (2) bioaccumulation studies, (3) biological indicator studies, and (4) ecological surveys of stream communities, including periphyton (attached algae), benthic macroinvertebrates, and fish. This document, the first in a series of reports on the results of the Y-12 Plant BMAP, describes studies that were conducted from May 1985 through September 1986.« less

Ridge suction drives plume-ridge interactions

NASA Astrophysics Data System (ADS)

Niu, Y.; Hékinian, R.

2003-04-01

Deep-sourced mantle plumes, if existing, are genetically independent of plate tectonics. When the ascending plumes approach lithospheric plates, interactions between the two occur. Such interactions are most prominent near ocean ridges where the lithosphere is thin and the effect of plumes is best revealed. While ocean ridges are mostly passive features in terms of plate tectonics, they play an active role in the context of plume-ridge interactions. This active role is a ridge suction force that drives asthenospheric mantle flow towards ridges because of material needs to form the ocean crust at ridges and lithospheric mantle in the vicinity of ridges. This ridge suction force increases with increasing plate separation rate because of increased material demand per unit time. As the seismic low-velocity zone atop the asthenosphere has the lowest viscosity that increases rapidly with depth, the ridge-ward asthenospheric flow is largely horizontal beneath the lithosphere. Recognizing that plume materials have two components with easily-melted dikes/veins enriched in volatiles and incompatible elements dispersed in the more refractory and depleted peridotitic matrix, geochemistry of some seafloor volcanics well illustrates that plume-ridge interactions are consequences of ridge-suction-driven flow of plume materials, which melt by decompression because of lithospheric thinning towards ridges. There are excellent examples: 1. The decreasing La/Sm and increasing MgO and CaO/Al_2O_3 in Easter Seamount lavas from Salas-y-Gomez Islands to the Easter Microplate East rift zone result from progressive decompression melting of ridge-ward flowing plume materials. 2. The similar geochemical observations in lavas along the Foundation hotline towards the Pacific-Antarctic Ridge result from the same process. 3. The increasing ridge suction force with increasing spreading rate explains why the Iceland plume has asymmetric effects on its neighboring ridges: both topographic and

First annual report on the Biological Monitoring and Abatement Program at Oak Ridge National Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Loar, J. M.; Adams, S. M.; Blaylock, B. G.

1992-08-01

As a condition of the National Pollutant Discharge Elimination System (NPDES) permit issued to Oak Ridge National Laboratory (ORNL) on April 1, 1986, a Biological Monitoring and Abatement Program (BMAP) was developed for White Oak Creek (WOC); selected tributaries of WOC, including Fifth Creek, First Creek, Melton Branch, and Northwest Tributary; and the Clinch River. BMAP consists of seven major tasks that address both radiological and nonradiological contaminants in the aquatic and terrestrial environs on-site and the aquatic environs off-site. These tasks are (1) toxicity monitoring; (2) bioaccumulation monitoring of nonradiological contaminants in aquatic biota; (3) biological indicator studies; (4)more » instream ecological monitoring; (5) assessment of contaminants in the terrestrial environment; (6) radioecology of WOC and White Oak Lake (WOL); and (7) contaminant transport, distribution, and fate in the WOC embayment-Clinch River-Watts Bar Reservoir system. This document, the first of a series of annual reports presenting the results of BMAP, describes studies that were conducted from March through December 1986.« less

Repeat ridge jumps associated with plume-ridge interaction, melt transport, and ridge migration

NASA Astrophysics Data System (ADS)

Mittelstaedt, Eric; Ito, Garrett; van Hunen, Jeroen

2011-01-01

Repeated shifts, or jumps, of mid-ocean ridge segments toward nearby hot spots can produce large, long-term changes to the geometry and location of the tectonic plate boundaries. Ridge jumps associated with hot spot-ridge interaction are likely caused by several processes including shear on the base of the plate due to expanding plume material as well as reheating of lithosphere as magma passes through it to feed off-axis volcanism. To study how these processes influence ridge jumps, we use numerical models to simulate 2-D (in cross section) viscous flow of the mantle, viscoplastic deformation of the lithosphere, and melt migration upward from the asthenospheric melting zone, laterally along the base of the lithosphere, and vertically through the lithosphere. The locations and rates that magma penetrates and heats the lithosphere are controlled by the time-varying accumulation of melt beneath the plate and the depth-averaged lithospheric porosity. We examine the effect of four key parameters: magmatic heating rate of the lithosphere, plate spreading rate, age of the seafloor overlying the plume, and the plume-ridge migration rate. Results indicate that the minimum value of the magmatic heating rate needed to initiate a ridge jump increases with plate age and spreading rate. The time required to complete a ridge jump decreases with larger values of magmatic heating rate, younger plate age, and faster spreading rate. For cases with migrating ridges, models predict a range of behaviors including repeating ridge jumps, much like those exhibited on Earth. Repeating ridge jumps occur at moderate magmatic heating rates and are the result of changes in the hot spot magma flux in response to magma migration along the base of an evolving lithosphere. The tendency of slow spreading to promote ridge jumps could help explain the observed clustering of hot spots near the Mid-Atlantic Ridge. Model results also suggest that magmatic heating may significantly thin the lithosphere

Hybrid Viability and Fertility in Co-occuring Plant Species

NASA Astrophysics Data System (ADS)

Hernandez, E.; Garcia, C.; Yost, J.

2012-12-01

Similar species of plants can co-exist due to reproductive barriers that keep them from hybridizing. In the case of Lasthenia gracilis and L. californica, certain reproductive barriers allow them to co-exist at Jasper Ridge without hybridization. The two species are locally adapted to different regions of the same hillside, and have slight differences in flowering time but hybrids can be created at low rate in the green house. We tested the viability and fertility of green house produced hybrids to quantify post-zygotic reproductive isolation at Jasper Ridge. We planted 10 hybrid seeds and 10 control seeds from 11 different families. We measured the percent germination, survival to flowering and pollen fertility of the seeds. We expect lower germination, lower survival to flowering, and lower pollen viability of hybrid seeds as compared to control seeds.

Self-spreading of the wetting ridge during stick-slip on a viscoelastic surface

DOE PAGES

Park, S. J.; Bostwick, J. B.; De Andrade, V.; ...

2017-10-23

Dynamic wetting behaviors on soft solids are important to interpret complex biological processes from cell–substrate interactions. Despite intensive research studies over the past half-century, the underlying mechanisms of spreading behaviors are not clearly understood. The most interesting feature of wetting on soft matter is the formation of a “wetting ridge”, a surface deformation by a competition between elasticity and capillarity. Dynamics of the wetting ridge formed at the three-phase contact line underlies the dynamic wetting behaviors, but remains largely unexplored mostly due to limitations in indirect observation. Here, we directly visualize wetting ridge dynamics during continuous- and stick-slip motions onmore » a viscoelastic surface using X-ray microscopy. Strikingly, we discover that the ridge spreads spontaneously during stick and triggers contact line depinning (stick-to-slip transition) by changing the ridge geometry which weakens the contact line pinning. Finally, we clarify ‘viscoelastic-braking’, ‘stick-slipping’, and ‘stick-breaking’ spreading behaviors through the ridge dynamics. In stick-breaking, no ridge-spreading occurs and contact line pinning (hysteresis) is enhanced by cusp-bending while preserving a microscopic equilibrium at the ridge tip. We have furthered the understanding of spreading behaviors on soft solids and demonstrated the value of X-ray microscopy in elucidating various dynamic wetting behaviors on soft solids as well as puzzling biological issues.« less

Plume-ridge interaction: Shaping the geometry of mid-ocean ridges

NASA Astrophysics Data System (ADS)

Mittelstaedt, Eric L.

Manifestations of plume-ridge interaction are found across the ocean basins. Currently there are interactions between at least 21 hot spots and nearby ridges along 15--20% of the global mid-ocean ridge network. These interactions produce a number of anomalies including the presence of elevated topography, negative gravity anomalies, and anomalous crustal production. One form of anomalous crustal production is the formation of volcanic lineaments between hotspots and nearby mid-ocean ridges. In addition, observations indicate that mantle plumes tend to "capture" nearby mid-ocean ridges through asymmetric spreading, increased ridge propagation, and discrete shifts of the ridge axis, or ridge jumps. The initiation of ridge jumps and the formation of off-axis volcanic lineaments likely involve similar processes and may be closely related. In the following work, I use theoretical and numerical models to quantify the processes that control the formation of volcanic lineaments (Chapter 2), the initiation of mid-ocean ridge jumps associated with lithospheric heating due to magma passing through the plate (Chapter 3), and the initiation of jumps due to an upwelling mantle plume and magmatic heating governed by melt migration (Chapter 4). Results indicate that lineaments and ridge jumps associated with plume-ridge interaction are most likely to occur on young lithosphere. The shape of lineaments on the seafloor is predicted to be controlled by the pattern of lithospheric stresses associated with a laterally spreading, near-ridge mantle plume. Ridge jumps are likely to occur due to magmatic heating alone only in lithosphere ˜1Myr old, because the heating rate required to jump increases with spreading rate and plate age. The added effect of an upwelling plume introduces competing effects that both promote and inhibit ridge jumps. For models where magmatic heating is controlled by melt migration, repeat ridge jumps are predicted to occur as the plume and ridge separate, but

Oak Ridge reservation land-use plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bibb, W. R.; Hardin, T. H.; Hawkins, C. C.

1980-03-01

This study establishes a basis for long-range land-use planning to accommodate both present and projected DOE program requirements in Oak Ridge. In addition to technological requirements, this land-use plan incorporates in-depth ecological concepts that recognize multiple uses of land as a viable option. Neither environmental research nor technological operations need to be mutually exclusive in all instances. Unique biological areas, as well as rare and endangered species, need to be protected, and human and environmental health and safety must be maintained. The plan is based on the concept that the primary use of DOE land resources must be to implementmore » the overall DOE mission in Oak Ridge. This document, along with the base map and overlay maps, provides a reasonably detailed description of the DOE Oak Ridge land resources and of the current and potential uses of the land. A description of the land characteristics, including geomorphology, agricultural productivity and soils, water courses, vegetation, and terrestrial and aquatic animal habitats, is presented to serve as a resource document. Essentially all DOE land in the Oak Ridge area is being fully used for ongoing DOE programs or has been set aside as protected areas.« less

The impact of caregiver-mediated JASPER on child restricted and repetitive behaviors and caregiver responses.

PubMed

Harrop, Clare; Gulsrud, Amanda; Shih, Wendy; Hovsepyan, Lilit; Kasari, Connie

2017-05-01

Restricted and repetitive behaviors (RRBs) are a core feature of autism spectrum disorder (ASD). Compared to the social-communication impairments, we know considerably less about why children engage in RRBs and if and how to intervene with these behaviors. As a result, early intervention has typically focused on social-communication. In this study, we were interested in understanding how child RRBs changed following an intervention targeting social-communication behaviors and if caregiver training changed how they responded to their child's RRBs. Eighty-six toddlers with ASD and their caregivers received one of two interventions: caregivers were either actively coached while playing with their child (JASPER) or attended information sessions about ASD. On three different occasions (when they entered the study, following 10 weeks of intervention and 6-months after) caregivers were filmed playing with their child. From these recordings, we coded child RRBs and caregiver responses to these behaviors. Child RRBs remained relatively stable following intervention in both groups, but increased when the children returned at 6-months. Caregivers who received one-on-one coaching (JASPER) responded to a greater number of their child's RRBs and their responses were rated as more successful. Our study showed that a short-term social-communication intervention delivered through caregivers had "spillover effects" on how they also responded to their child's RRBs. Interventions targeting social-communication behaviors should also examine how these treatments affect child RRBs and how caregiver responses to these behaviors may change following training. Autism Res 2017, 10: 983-992. © 2016 International Society for Autism Research, Wiley Periodicals, Inc. © 2017 International Society for Autism Research, Wiley Periodicals, Inc.

Hotspot-Ridge Interaction: Shaping the Geometry of Mid-Ocean Ridges

NASA Astrophysics Data System (ADS)

Mittelstaedt, E.; Ito, G.

2004-12-01

Surface manifestations of hotspot-ridge interaction include geochemical anomalies, elevated ridge topography, negative gravity anomalies, off-axis volcanic lineaments, and ridge reorganization events. The last of these is expressed as either "captured" ridge segments due to asymmetric spreading, such as at the Galapagos, or as discrete jumps of the ridge axis toward the hotspot, such as at the Iceland, Tristan de Cuhna, Discovery, Shona, Louisville, Kerguelen, and Reunion hotspots. Mid-ocean ridge axis reorganizations through discrete jumps will cause variations in local volcanic patterns, lead to changes in overall plate shape and ridge axis morphology, and alter local mantle flow patterns. It has been proposed that discrete ridge jumps are a product of interaction between the lithosphere and a mantle plume. We examine this hypothesis using thin plate theory coupled with continuum damage mechanics to calculate the two-dimensional (plan-view) pattern of depth-integrated stresses in a plate of varying thickness with weakening due to volcanism at the ridge and above the plume center. Forces on the plate include plume shear, plate parallel gravitational forces due to buoyant uplift, and a prescribed velocity of plate motion along the edges of the model. We explore these forces and the effect of damage as mechanisms that may be required to predict ridge jumps.

Water-level altitudes 2008 and water-level changes in the Chicot, Evangeline, and Jasper Aquifers and compaction 1973-2007 in the Chicot and Evangeline Aquifers, Houston-Galveston Region, Texas

USGS Publications Warehouse

Kasmarek, Mark C.; Houston, Natalie A.

2008-01-01

This report, done in cooperation with the Harris-Galveston Subsidence District, the City of Houston, the Fort Bend Subsidence District, and the Lone Star Groundwater Conservation District, is one in an annual series of reports that depicts water-level altitudes and water-level changes in the Chicot, Evangeline, and Jasper aquifers, and compaction in the Chicot and Evangeline aquifers in the Houston-Galveston region, Texas. The report contains 17 sheets and 16 tables: 3 sheets are maps showing current-year (2008) water-level altitudes for each aquifer, respectively; 3 sheets are maps showing 1-year (2007-08) water-level changes for each aquifer, respectively; 3 sheets are maps showing 5-year (2003-08) water-level changes for each aquifer, respectively; 4 sheets are maps showing long-term (1990-2008 and 1977-2008) water-level changes for the Chicot and Evangeline aquifers, respectively; 1 sheet is a map showing long-term (2000-2008) water-level change for the Jasper aquifer; 1 sheet is a revision of a previously published water-level-altitude map for the Jasper aquifer for 2003; 1 sheet is a map showing site locations of borehole extensometers; and 1 sheet comprises graphs showing measured compaction of subsurface material at the sites from 1973 or later through 2007, respectively. Tables listing the data used to construct the aquifer-data maps and the compaction graphs are included.

Water-level altitudes 2007 and water-level changes in the Chicot, Evangeline, and Jasper Aquifers and compaction 1973-2006 in the Chicot and Evangeline Aquifers, Houston-Galveston Region, Texas

USGS Publications Warehouse

Kasmarek, Mark C.; Houston, Natalie A.

2007-01-01

This report, done in cooperation with the Harris-Galveston Subsidence District, the City of Houston, the Fort Bend Subsidence District, and the Lone Star Groundwater Conservation District, is one in an annual series of reports that depicts water-level altitudes and water-level changes in the Chicot, Evangeline, and Jasper aquifers, and compaction in the Chicot and Evangeline aquifers in the Houston-Galveston, Texas, region. The report contains 18 sheets and 17 tables: 3 sheets are maps showing current-year (2007) water-level altitudes for each aquifer, respectively; 3 sheets are maps showing 1-year (2006-07) water-level changes for each aquifer, respectively; 3 sheets are maps showing 5-year (2002-07) water-level changes for each aquifer, respectively; 4 sheets are maps showing long-term (1990-2007 and 1977-2007) water-level changes for the Chicot and Evangeline aquifers, respectively; 1 sheet is a map showing long-term (2000-2007) water-level change for the Jasper aquifer; 2 sheets are revisions of previously published water-level-altitude maps for the Jasper aquifer for 2000 and 2002, respectively; 1 sheet is a map showing site locations of borehole extensometers; and 1 sheet comprises graphs showing measured compaction of subsurface material at the sites from 1973 or later through 2006, respectively. Tables listing the data used to construct the aquifer-data maps and the compaction graphs also are included.

Ridge: a computer program for calculating ridge regression estimates

Treesearch

Donald E. Hilt; Donald W. Seegrist

1977-01-01

Least-squares coefficients for multiple-regression models may be unstable when the independent variables are highly correlated. Ridge regression is a biased estimation procedure that produces stable estimates of the coefficients. Ridge regression is discussed, and a computer program for calculating the ridge coefficients is presented.

Glacial modulation of mid-ocean ridge magmatism and anomalous Pacific Antarctic Ridge volcanism during Termination II

NASA Astrophysics Data System (ADS)

Asimow, P. D.; Lewis, M.; Lund, D. C.; Seeley, E.; McCart, S.; Mudahy, A.

2017-12-01

Glacially-driven sea level rise and fall may modulate submarine volcanism by superposing pressure changes on the tectonic decompression that causes melt production in the mantle below mid-ocean ridges. A number of recent studies have considered whether this effect is recorded in the periodicity of ridge flank bathymetry (Tolstoy, 2015; Crowley et al., 2015) but interpretation of the bathymetric data remains controversial (Goff, 2016; Olive et al., 2016). We have pursued an independent approach using hydrothermal metals in well-dated near-ridge sediment cores. Along the full length of the East Pacific Rise, in areas of the ocean with widely variable biologic productivity, there are large and consistent rises in Fe, Mn, and As concentrations during the last two glacial terminations. We interpret these cores as records of excess hydrothermal flux due to delayed delivery to the axis of excess melt generated by the preceding falls in sea level. Here we discuss the potentially related discovery, in a core near the Pacific Antarctic Ridge (PAR), of a 10 cm thick layer of basaltic ash shards up to 250 mm in size, coincident with the penultimate deglaciation (Termination II). Although the site was 8 km off-axis at the time, the glasses have major element, volatile, and trace element composition consistent with more evolved members of the axial MORB suite from the nearby ridge axis. Their morphologies are typical of pyroclastic deposits created by explosive submarine volcanism (Clague et al., 2009). We propose that a period of low magmatic flux following a sea-level rise caused cooling of crustal magmatic systems, more advanced fractionation in the axial magma chamber, and increases in viscosity and volatile concentration. We hypothesize subsequent arrival of high magmatic flux during Termination II then reactivated the system and triggered an unusually vigorous series of explosive eruptions along this segment of the PAR. Ash layers recording large eruptions such as this one

Low temperature hydrothermal oil and associated biological precursors in serpentinites from Mid-Ocean Ridge

NASA Astrophysics Data System (ADS)

Pasini, Valerio; Brunelli, Daniele; Dumas, Paul; Sandt, Christophe; Frederick, Joni; Benzerara, Karim; Bernard, Sylvain; Ménez, Bénédicte

2013-09-01

The origin of light hydrocarbons discovered at serpentinite-hosted mid-ocean hydrothermal fields is generally attributed to the abiogenic reduction of carbon (di)oxide by molecular hydrogen released during the progressive hydration of mantle-derived peridotites. These serpentinization by-products represent a valuable source of carbon and energy and are known to support deep microbial ecosystems unrelated to photosynthesis. In addition, the pool of subsurface organic compounds could also include materials derived from the thermal degradation of biological material. We re-investigate the recently described relics of deep microbial ecosystems hosted in serpentinites of the Mid-Atlantic Ridge (4-6°N) in order to study the ageing and (hydro)thermal degradation of the preserved biomass. An integrated set of high resolution micro-imaging techniques (Scanning Electron Microscopy, High Resolution Transmission Electron Microscopy, Raman and Fourier Transform Infra-Red microspectroscopy, Confocal Laser Scanning Microscopy, and Scanning Transmission X-ray Microscopy at the carbon K-edge) has been applied to map the distribution of the different organic components at the micrometer scale and to characterize their speciation and structure. We show that biologically-derived material, containing aliphatic groups, along with carbonyl and amide functional groups, has experienced hydrothermal degradation and slight aromatization. In addition, aliphatic compounds up to C6-C10 with associated carboxylic functional groups wet the host bastite and the late serpentine veins crosscutting the rock. These compounds represent a light soluble organic fraction expelled after biomass degradation through oxidation and thermal cracking. The detected complex organic matter distribution recalls a typical petroleum system, where fossil organic matter of biological origin maturates, expelling the soluble fraction which then migrates from the source to the reservoir. Ecosystem-hosting serpentinites

Biological and Environmental Research Program at Oak Ridge National Laboratory, FY 1992--1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This report is the 1992--1994 Program Director's Overview Report for Oak Ridge National Laboratory's (ORNL's) Biological and Environmental Research (BER) Program, and as such it addresses KP-funded work at ORNL conducted during FY 1991 and in progress during FY 1992; it also serves as a planning document for the remainder of FY 1992 through FY 1994. Non-BER funded work at ORNL relevant to the mission of OHER is also discussed. The second section of the report describes ORNL facilities and resources used by the BER program. The third section addresses research management practices at ORNL. The fourth, fifth, and sixthmore » sections address BER-funded research in progress, program accomplishments and research highlights, and program orientation for the remainder of FY 1992 through FY 1994, respectively. Work for non-BER sponsors is described in the seventh section, followed by a discussion of significant near and long-term issues facing BER work at ORNL in the eighth section. The last section provides a statistical summary of BER research at ORNL. Appendices supplement the above topics with additional detail.« less

Ridge Tectonics, Magma Supply, and Ridge-Hotpot Interaction at the Eastern End of the Australian-Antarctic Ridge

NASA Astrophysics Data System (ADS)

Kim, S.; Lin, J.; Park, S.; Choi, H.; Lee, S.

2013-12-01

During 2011-2013 the Korea Polar Research Institute (KOPRI) conducted three successive expeditions to the eastern end of the Australian-Antarctic Ridge (AAR) to investigate the tectonics, geochemistry, and hydrothermal activity of this intermediate fast spreading system. On board the Korean icebreaker R/V Araon, the science party collected multiple types of data including multibeam bathymetry, gravity, magnetics, as well as rock and water column samples. In addition, Miniature Autonomous Plume Recorders (MAPRs) were deployed at each of the wax-core rock sampling sites to detect the presence of active hydrothermal vents. In this study, we present a detailed analysis of a 360-km-long super-segment at the eastern end of the AAR to quantify the spatial variations in ridge morphology and investigate its respond to changes in melt supply. The study region contains several intriguing bathymetric features including (1) abrupt changes in the axial topography, alternating between rift valleys and axial highs within relatively short ridge segments; (2) overshooting ridge tips at the ridge-transform intersections; (3) systematic migration patterns of hooked ridges; (4) a 350-km-long mega-transform fault; and (5) robust axial and off-axis volcanisms. To obtain a proxy for regional variations in magma supply, we calculated residual mantle Bouguer gravity anomalies (RMBA), gravity-derived crustal thickness, and residual topography for seven sub-segments. The results of the analyses revealed that the southern flank of the AAR is associated with a shallower seafloor, more negative RMBA, thicker crust, and/or less dense mantle than the conjugate northern flank. Furthermore, this N-S asymmetry becomes more prominent toward the super-segment of the AAR. Such regional variations in seafloor topography and RMBA are consistent with the hypothesis that ridge segments in the study area have interacted with the Balleny hotspot, currently lies southwest of the AAR. However, the influence of

Small scale morphodynamics of shoreface-connected ridges and their impact on benthic macrofauna

NASA Astrophysics Data System (ADS)

Markert, Edith; Kröncke, Ingrid; Kubicki, Adam

2015-05-01

The first interdisciplinary analysis (biological and sedimentological) of macrofauna communities influenced by long-term morphodynamics of shoreface-connected ridges in the German Bight on a small scale is presented in this study. The study area covering 4 km2 was located off the island of Spiekeroog, in an area known as a Tellina fabula community. Sediment samples taken at 27 sample sites were coupled with side-scan sonar data to draw a precise sediment map of the area, as well as with high-resolution multi-beam bathymetry data to understand the morphodynamic changes of the seabed between 2003 and 2010. The macrofauna data acquired at the same 27 sites were analysed for community structure using non-metric multidimensional scaling, the ANOSIM and PERMANOVA tests. Correlations between biological and environmental variables were examined with the BIOENV procedure. The study revealed a shore-parallel sediment zonation with clear and sharp borders induced by local morphodynamics, which together with specific local bathymetry affected the formation of three different macrofauna affinity groups. One group was located on the shoreface and in the troughs (dominant species: Scoloplos armiger, Lanice conchilega, Notomastus latericeus), one on the landward flanks of the ridges (dominant species: Aonides paucibranchiata, Goniadella bobretzkii), and one on the ridge crests (dominant species: Ophelia spp. juv., Spio goniocephala). The spatial distribution of the affinity groups, their taxa number and abundance of species was dependent on a surface sediment pattern resulting from local hydrodynamics, which in turn is known to influence the food availability. A seaward steepening of ridges took place and was an effect of erosion up to 0.34 m on landward flanks in and accumulation up to 0.29 m on seaward flanks in seven years. The studied shoreface-connected ridges migrated seawards with a pace of 5 m/year for the large ridge and 20 m/year for the small ridge. Elongated mud

Cover sequence stratigraphy and structure: Salem Church basement culmination, Georgia Blue Ridge

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, L.; Tull, J.F.

The Salem Church anticline SW of Jasper, Georgia in the western Blue Ridge is roughly an oval shaped structural dome with its long axis trending NE-SW. The anticline is cored by the Grenville age Corbin Gneiss which represents allochthonous North American basement. In debate for decades has been the age and origin of several kilometers of poly-deformed cover sequence rocks which were metamorphosed to greenschist facies and were probably transported over a long distance inland after their deposition. The stratigraphy of the cover sequence exhibits rapid lithofacies changes. At most localities, the basement is overlain by a 500--600 m thickmore » coarse clastic unit sourced from the basement rocks, composed mainly of metaconglomerate, metasandstone and metadiamictite. A thin unit less than 20 m thick of sericite phyllite occurs between the basement and the coarse clastic unit along the SE limb of the anticline but pinches out to the MW. A relatively sharp stratigraphic contact occurs between quartzite unit and overlying dark colored metagreywackes and metadiamictites containing distinctive cobbles and boulders of granitic and gneissic basement rocks up to 1 meter in length. This unit is about 100 m thick in the SW but thins rapidly towards the NE. It grades up into a geographically widespread graphitic phyllite which encircles most of the anticline. Unlike the cover sequence above the corbin basement west of Waleska, Georgia, no carbonate is found in this area.« less

Vegetation species composition and canopy architecture information expressed in leaf water absorption measured in the 1000 nm and 2200 spectral region by an imaging spectrometer

NASA Technical Reports Server (NTRS)

Green, Robert O.; Roberts, Dar A.

1995-01-01

Plant species composition and plant architectural attributes are critical parameters required for the measuring, monitoring, and modeling of terrestrial ecosystems. Remote sensing is commonly cited as an important tool for deriving vegetation properties at an appropriate scale for ecosystem studies, ranging from local to regional and even synoptic scales. Classical approaches rely on vegetation indices such as the normalized difference vegetation index (NDVI) to estimate biophysical parameters such as leaf area index or intercepted photosynthetically active radiation (IPAR). Another approach is to apply a variety of classification schemes to map vegetation and thus extrapolate fine-scale information about specific sites to larger areas of similar composition. Imaging spectrometry provides additional information that is not obtainable through broad-band sensors and that may provide improved inputs both to direct biophysical estimates as well as classification schemes. Some of this capability has been demonstrated through improved discrimination of vegetation, estimates of canopy biochemistry, and liquid water estimates from vegetation. We investigate further the potential of leaf water absorption estimated from Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) data as a means for discriminating vegetation types and deriving canopy architectural information. We expand our analysis to incorporate liquid water estimates from two spectral regions, the 1000-nm region and the 2200-nm region. The study was conducted in the vicinity of Jasper Ridge, California, which is located on the San Francisco peninsula to the west of the Stanford University campus. AVIRIS data were acquired over Jasper Ridge, CA, on June 2, 1992, at 19:31 UTC. Spectra from three sites in this image were analyzed. These data are from an area of healthy grass, oak woodland, and redwood forest, respectively. For these analyses, the AVIRIS-measured upwelling radiance spectra for the entire Jasper

Remedial Investigation Work Plan for Chestnut Ridge Operable Unit 1 (Chestnut Ridge Security Pits) at the Oak Ridge Y-12 Plant, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-03-01

This document outlines the activities necessary to conduct a Remedial Investigation (RI) of the Chestnut Ridge Security Pits (CRSP) at the Oak Ridge Y-12 Plant. The CRSP, also designated Chestnut Ridge Operable Unit (OU) 1, is one of four OUs along Chestnut Ridge on the Oak Ridge Reservation (ORR). The purpose of the RI is to collect data to (1) evaluate the nature and extent of known and suspected contaminants, (2) support an Ecological Risk Assessment (ERA) and a Human Health Risk Assessment (HHRA), (3) support the feasibility study in the development and analysis of remedial alternatives, and (4) ultimately,more » develop a Record of Decision (ROD) for the site. This chapter summarizes the regulatory background of environmental investigation on the ORR and the approach currently being followed and provides an overview of the RI to be conducted at the CRSP. Subsequent chapters provide details on site history, sampling activities, procedures and methods, quality assurance (QA), health and safety, and waste management related to the RI.« less

DISTINCTIVE FINE-SCALE MORPHOLOGY OF HYDRATE RIDGE

NASA Astrophysics Data System (ADS)

Conlin, D.; Paull, C. K.; Caress, D. W.; Thomas, H.; Ussler, W.; Lundsten, E.; Thompson, D.

2009-12-01

, elongated in a NE-SW direction, and up to 1400 m long. Again, these patches appear to consist of more resistant strata that have been exposed by erosion. One crater-like feature is roughly circular with a raised rim surrounding a 40 m deep depression that is 300 m in diameter. A ridge extends over 600 m to the SW from the SW flank of this depression. This ridge has a trough near its crest that suggests it is an open crack associated with seafloor expansion formed when seafloor was up-lifted to form the ridge. Previous ROV and manned submersible dives indicate that methane-derived carbonates, chemosynthetic biological communities and near seafloor gas hydrate occurrences are associated with the patches of seafloor we now know are characterized by the distinctive hummocky topography. Apparently, these distinctive textures and seafloor features are produced by processes which are focused at methane-rich seafloor sites; however, previously available survey tools have not had the resolution to adequately image these features.

Water-level altitudes 2010 and water-level changes in the Chicot, Evangeline, and Jasper aquifers and compaction 1973-2009 in the Chicot and Evangeline aquifers, Houston-Galveston region, Texas

USGS Publications Warehouse

Kasmarek, Mark C.; Johnson, Michaela R.; Ramage, Jason K.

2010-01-01

Most of the subsidence in the Houston-Galveston region has occurred as a direct result of groundwater withdrawals for municipal supply, industrial use, and irrigation that depressured and dewatered the Chicot and Evangeline aquifers causing compaction of the clay layers of the aquifer sediments. This report, prepared by the U.S. Geological Survey, in cooperation with the Harris-Galveston Subsidence District, City of Houston, Fort Bend Subsidence District, and Lone Star Groundwater Conservation District, is one in an annual series of reports depicting water-level altitudes and water-level changes in the Chicot, Evangeline, and Jasper aquifers and compaction in the Chicot and Evangeline aquifers in the Houston-Galveston region. The report contains maps showing 2010 water-level altitudes for the Chicot, Evangeline, and Jasper aquifers, respectively; maps showing 1-year (2009-10) water-level-altitude changes for each aquifer; maps showing 5-year (2005-10) water-level-altitude changes for each aquifer; maps showing long-term (1990-2010 and 1977-2010) water-level-altitude changes for the Chicot and Evangeline aquifers; a map showing long-term (2000-10) water-level-altitude change for the Jasper aquifer; a map showing locations of borehole extensometer sites; and graphs showing measured compaction of subsurface material at the extensometers from 1973, or later, through 2009. Tables listing the data used to construct each aquifer-data map and the compaction graphs are included. Water levels in the Chicot, Evangeline, and Jasper aquifers were measured during December 2009-March 2010. In 2010, water-level-altitude contours for the Chicot aquifer ranged from 200 feet below National Geodetic Vertical Datum of 1929 or North American Vertical Datum of 1988 (hereinafter, datum) in a small area in southwestern Harris County to 200 feet above datum in central to southwestern Montgomery County. Water-level-altitude changes in the Chicot aquifer ranged from a 49-foot decline to a 67

Water-level altitudes 2011 and water-level changes in the Chicot, Evangeline, and Jasper aquifers and compaction 1973-2010 in the Chicot and Evangeline aquifers, Houston-Galveston region, Texas

USGS Publications Warehouse

Johnson, Michaela R.; Ramage, Jason K.; Kasmarek, Mark C.

2011-01-01

Most of the subsidence in the Houston–Galveston region has occurred as a direct result of groundwater withdrawals for municipal supply, industrial use, and irrigation that depressured and dewatered the Chicot and Evangeline aquifers causing compaction of the clay layers of the aquifer sediments. This report, prepared by the U.S. Geological Survey, in cooperation with the Harris–Galveston Subsidence District, City of Houston, Fort Bend Subsidence District, and Lone Star Groundwater Conservation District, is one in an annual series of reports depicting water-level altitudes and water-level changes in the Chicot, Evangeline, and Jasper aquifers and compaction in the Chicot and Evangeline aquifers in the Houston–Galveston region. The report contains maps showing 2011 water-level altitudes for the Chicot, Evangeline, and Jasper aquifers; maps showing 1-year (2010–11) water-level-altitude changes for each aquifer; maps showing 5-year (2006–11) water-level-altitude changes for each aquifer; maps showing long-term (1990–2011 and 1977–2011) water-level-altitude changes for the Chicot and Evangeline aquifers; a map showing long-term (2000–11) water-level-altitude change for the Jasper aquifer; a map showing locations of borehole extensometer sites; and graphs showing measured compaction of subsurface material at the extensometers from 1973, or later, through 2010. Tables listing the data used to construct each aquifer-data map and the compaction graphs are included.Water levels in the Chicot, Evangeline, and Jasper aquifers were measured during December 2010–February 2011. In 2011, water-level-altitude contours for the Chicot aquifer ranged from 200 feet below North American Vertical Datum of 1988 (hereinafter, datum) in a small area in southwestern Harris County to 200 feet above datum in central to southwestern Montgomery County. Water-level-altitude changes in the Chicot aquifer ranged from a 40-foot decline to a 33-foot rise (2010–11), from a 10-foot

Does Presence of a Mid-Ocean Ridge Enhance Biomass and Biodiversity?

PubMed Central

Priede, Imants G.; Bergstad, Odd Aksel; Miller, Peter I.; Vecchione, Michael; Gebruk, Andrey; Falkenhaug, Tone; Billett, David S. M.; Craig, Jessica; Dale, Andrew C.; Shields, Mark A.; Tilstone, Gavin H.; Sutton, Tracey T.; Gooday, Andrew J.; Inall, Mark E.; Jones, Daniel O. B.; Martinez-Vicente, Victor; Menezes, Gui M.; Niedzielski, Tomasz; Sigurðsson, Þorsteinn; Rothe, Nina; Rogacheva, Antonina; Alt, Claudia H. S.; Brand, Timothy; Abell, Richard; Brierley, Andrew S.; Cousins, Nicola J.; Crockard, Deborah; Hoelzel, A. Rus; Høines, Åge; Letessier, Tom B.; Read, Jane F.; Shimmield, Tracy; Cox, Martin J.; Galbraith, John K.; Gordon, John D. M.; Horton, Tammy; Neat, Francis; Lorance, Pascal

2013-01-01

In contrast to generally sparse biological communities in open-ocean settings, seamounts and ridges are perceived as areas of elevated productivity and biodiversity capable of supporting commercial fisheries. We investigated the origin of this apparent biological enhancement over a segment of the North Mid-Atlantic Ridge (MAR) using sonar, corers, trawls, traps, and a remotely operated vehicle to survey habitat, biomass, and biodiversity. Satellite remote sensing provided information on flow patterns, thermal fronts, and primary production, while sediment traps measured export flux during 2007–2010. The MAR, 3,704,404 km2 in area, accounts for 44.7% lower bathyal habitat (800–3500 m depth) in the North Atlantic and is dominated by fine soft sediment substrate (95% of area) on a series of flat terraces with intervening slopes either side of the ridge axis contributing to habitat heterogeneity. The MAR fauna comprises mainly species known from continental margins with no evidence of greater biodiversity. Primary production and export flux over the MAR were not enhanced compared with a nearby reference station over the Porcupine Abyssal Plain. Biomasses of benthic macrofauna and megafauna were similar to global averages at the same depths totalling an estimated 258.9 kt C over the entire lower bathyal north MAR. A hypothetical flat plain at 3500 m depth in place of the MAR would contain 85.6 kt C, implying an increase of 173.3 kt C attributable to the presence of the Ridge. This is approximately equal to 167 kt C of estimated pelagic biomass displaced by the volume of the MAR. There is no enhancement of biological productivity over the MAR; oceanic bathypelagic species are replaced by benthic fauna otherwise unable to survive in the mid ocean. We propose that globally sea floor elevation has no effect on deep sea biomass; pelagic plus benthic biomass is constant within a given surface productivity regime. PMID:23658696

Second report on the Oak Ridge Y-12 Plant Biological Monitoring and Abatement Program for East Fork Poplar Creek

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hinzman, R.L.; Adams, S.M.; Black, M.C.

1993-06-01

As stipulated in the National Pollutant Discharge Elimination System (NDPES) permit issued to the Oak Ridge Y-12 Plant on May 24, 1986, a Biological Monitoring and Abatement Program (BMAP) was developed for the receiving stream, East Fork Poplar Creek (EFPC). The objectives of BMAP are (1) to demonstrate that the current effluent limitations established for the Y-12 Plant protect the classified uses of EFPC (e.g., the growth and propagation of fish and aquatic life), as designated by the Tennessee Department of Environment and Conservation (TDEC) and (2) to document the ecological effects resulting from implementation of a Water Pollution Controlmore » Program that includes construction of several large wastewater treatment facilities. BMAP consists of four major tasks: (1) ambient toxicity testing; (2) bioaccumulation studies; (3) biological indicator studies; and (4) ecological surveys of stream communities, including periphyton (attached algae), benthic (bottom-dwelling) macroinvertebrates, and fish. This document, the second in a series of reports on the results of the Y-12 Plant BMAP, describes studies that were conducted between July 1986 and July 1988, although additional data collected outside this time period are included, as appropriate.« less

Controls on melting at spreading ridges from correlated abyssal peridotite - mid-ocean ridge basalt compositions

NASA Astrophysics Data System (ADS)

Regelous, Marcel; Weinzierl, Christoph G.; Haase, Karsten M.

2016-09-01

Variations in the volume and major element composition of basalt erupted along the global mid-ocean ridge system have been attributed to differences in mantle potential temperature, mantle composition, or plate spreading rate and lithosphere thickness. Abyssal peridotites, the residues of mantle melting beneath mid-ocean ridges, provide additional information on the melting process, which could be used to test these hypotheses. We compiled a global database of abyssal peridotite compositions averaged over the same ridge segments defined by Gale et al. (2013). In addition, we calculated the distance of each ridge segment to the nearest hotspots. We show that Cr# in spinel in abyssal peridotites is negatively correlated with Na90 in basalts from the same ridge segments on a global scale. Ridge segments that erupt basalts apparently produced by larger degrees of mantle melting are thus underlain by peridotites from which large amounts of melt have been extracted. We find that near-ridge hotspots have a more widespread influence on mid-ocean ridge basalt (MORB) composition and ridge depth than previously thought. However, when these hotspot-influenced ridge segments are excluded, the remaining segments show clear relationships between MORB composition, peridotite composition, and ridge depth with spreading rate. Very slow-spreading ridges (<20 mm/yr) are deeper, erupt basalts with higher Na90, Al90, K90/Ti90, and lower Fe90, Ca90/Al90, and expose peridotites with lower Cr# than intermediate and fast-spreading ridges. We show that away from hotspots, the spreading-rate dependence of the maximum degree of mantle melting inferred from Cr# in peridotites (FM) and the bulk degree of melting inferred from Na90 in basalts (FB) from the same ridge segments is unlikely to be due to variations in mantle composition. Nor can the effects of dynamic mantle upwelling or incomplete melt extraction at low spreading rates satisfactorily explain the observed compositions of abyssal

Green vegetation, nonphotosynthetic vegetation, and soils in AVIRIS data

NASA Technical Reports Server (NTRS)

Roberts, D. A.; Smith, M. O.; Adams, J. B.

1993-01-01

The problem of distinguishing between green vegetation, nonphotosynthetic vegetation (NPV, such as dry grass, leaf litter, and woody material), and soils in imaging-spectrometer data is addressed by analyzing an image taken by the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) over the Jasper Ridge Biological Preserve (California) on September 20, 1989, using spectral mixture analysis. Over 98 percent of the spectral variation could be explained by linear mixtures of three endmembers, green vegetation, shade, and soil. NPV, which could not be distinguished from soil when included as an endmember, was discriminated by residual spectra that contained cellulose and lignin absorptions. Distinct communities of green vegetation were distinguished by (1) nonlinear mixing effect caused by transmission and scattering by green leaves, (2) variations in a derived canopy-shade spectrum, and (3) the fraction of NPV.

Water-level altitudes 2005 and water-level changes in the Chicot, Evangeline, and Jasper aquifers and compaction 1973-2004 in the Chicot and Evangeline aquifers, Houston-Galveston region, Texas

USGS Publications Warehouse

Kasmarek, Mark C.; Houston, Natalie A.

2005-01-01

This report is one in an annual series of reports that depicts water-level altitudes and water-level changes in the Chicot, Evangeline, and Jasper aquifers, and compaction in the Chicot and Evangeline aquifers in the Houston-Galveston region. The Houston-Galveston region comprises Harris, Galveston, Fort Bend, Waller, and Montgomery Counties and adjacent parts of Brazoria, Grimes, Walker, San Jacinto, Liberty, and Chambers Counties. The report was prepared in cooperation with the Harris-Galveston Coastal Subsidence District, the City of Houston, the Fort Bend Subsidence District, and the Lone Star Groundwater Conservation District. For the Chicot and Evangeline aquifers, maps show approximate water-level altitudes in 2005, water-level changes from 2004 to 2005, and approximate water-level changes from 2000 to 2005, from 1990 to 2005, and from 1977 to 2005 (figs. 1, 2, 3, 4, 5, 6, 7, 8, 9, and 10). For the Jasper aquifer, maps show approximate water-level altitudes in 2005 and water-level changes from 2004 to 2005 and 2000 to 2005 (figs. 11, 12, and 13). The report also contains a map showing borehole extensometer (well equipped with compaction monitor) site locations (fig. 14) and graphs showing measured compaction of subsurface material at these sites from 1973 or later to 2004 (fig. 15).The U.S. Geological Survey (USGS) has published annual reports of water-level altitudes and water-level changes for the Chicot and Evangeline aquifers in the Houston-Galveston region since 1979; and annual reports of same for the Fort Bend subregion (Fort Bend County and adjacent areas) since 1990. The USGS published its first water-level-altitude map for the Jasper aquifer in the greater Houston area (primarily Montgomery County) in 2001. The 2005 water-level-altitude and water-level-change maps for the three aquifers are included in this report.

Water-level altitudes 2006 and water-level changes in the Chicot, Evangeline, and Jasper aquifers and compaction 1973-2005 in the Chicot and Evangeline aquifers, Houston-Galveston region, Texas

USGS Publications Warehouse

Kasmarek, Mark C.; Houston, Natalie A.; Brown, Dexter W.

2006-01-01

This report is one in an annual series of reports that depicts water-level altitudes and water-level changes in the Chicot, Evangeline, and Jasper aquifers, and compaction in the Chicot and Evangeline aquifers in the Houston-Galveston region. The Houston-Galveston region comprises Harris, Galveston, Fort Bend, Waller, and Montgomery Counties and adjacent parts of Brazoria, Grimes, Walker, San Jacinto, Liberty, and Chambers Counties. The report was prepared in cooperation with the Harris-Galveston Coastal Subsidence District, the City of Houston, the Fort Bend Subsidence District, and the Lone Star Groundwater Conservation District. For the Chicot and Evangeline aquifers, maps show approximate water-level altitudes in 2006, water-level changes from 2005 to 2006, and approximate water-level changes from 2001 to 2006, from 1990 to 2006, and from 1977 to 2006 (figs. 1, 2, 3, 4, 5, 6, 7, 8, 9, 10). For the Jasper aquifer, maps show approximate water-level altitudes in 2006 and water-level changes from 2005 to 2006 and 2000 to 2006 (figs. 11, 12, 13). The report also contains a map showing borehole extensometer (well equipped with compaction monitor) site locations (fig. 14) and graphs showing measured compaction of subsurface material at these sites from 1973 or later to 2005 (fig. 15).The U.S. Geological Survey (USGS) has published annual reports of water-level altitudes and water-level changes for the Chicot and Evangeline aquifers in the Houston-Galveston region since 1979; and annual reports of same for the Fort Bend subregion (Fort Bend County and adjacent areas) since 1990. The USGS published its first water-level-altitude map for the Jasper aquifer in the greater Houston area (primarily Montgomery County) in 2001. The 2006 water-level-altitude and water-level-change maps for the three aquifers are included in this report.

Water-level altitudes 2004 and water-level changes in the Chicot, Evangeline, and Jasper aquifers and compaction 1973-2003 in the Chicot and Evangeline aquifers, Houston-Galveston region, Texas

USGS Publications Warehouse

Kasmarek, Mark C.; Lanning-Rush, Jennifer

2004-01-01

This report is one in an annual series of reports that depicts water-level altitudes and water-level changes in the Chicot, Evangeline, and Jasper aquifers, and compaction in the Chicot and Evangeline aquifers in the Houston-Galveston region. The Houston-Galveston region comprises Harris, Galveston, Fort Bend, Waller, and Montgomery Counties and adjacent parts of Brazoria, Grimes, Walker, San Jacinto, Liberty, and Chambers Counties. The report was prepared in cooperation with the Harris-Galveston Coastal Subsidence District, the City of Houston, the Fort Bend Subsidence District, and the Lone Star Groundwater Conservation District. For the Chicot and Evangeline aquifers, maps show approximate water-level altitudes in 2004, water-level changes from 2003 to 2004, approximate water-level changes from 1977 to 2004, and approximate water-level changes from 1990 to 2004 (figs. 1, 2, 3, 4, 5, 6, 7, 8). For the Jasper aquifer, maps show approximate water-level altitudes in 2004 and water-level changes from 2003 to 2004 and 2000 to 2004 (figs. 9, 10, 11). The report also contains a map showing borehole extensometer (well equipped with compaction monitor) site locations (fig. 12) and graphs showing measured compaction of subsurface material at these sites from 1973 or later to 2003 (fig. 13). The U.S. Geological Survey (USGS) has published annual reports of water-level altitudes and water-level changes for the Chicot and Evangeline aquifers in the Houston-Galveston region since 1979; and annual reports of same for the Fort Bend subregion (Fort Bend County and adjacent areas) since 1990. The USGS published its first water-level-altitude map for the Jasper aquifer in the greater Houston area (primarily Montgomery County) in 2001. The 2004 water-level-altitude and water-level-change maps for the three aquifers are included in this report.

Biomechanical comparison of a novel engine-driven ridge spreader and conventional ridge splitting techniques.

PubMed

Jung, Gyu-Un; Kim, Jun Hwan; Lim, Nam Hun; Yoon, Gil Ho; Han, Ji-Young

2017-06-01

Ridge splitting techniques are used for horizontal ridge augmentation in implant dentistry. Recently, a novel engine-driven ridge splitting technique was introduced. This study compared the mechanical forces produced by conventional and engine-driven ridge splitting techniques in porcine mandibles. In 33 pigs, mandibular premolar areas were selected for the ridge splitting procedures, designed as a randomized split-mouth study. The conventional group underwent a chisel-and-mallet procedure (control group, n = 20), and percussive impulse (Newton second, Ns) was measured using a sensor attached to the mallet. In the engine-driven ridge spreader group (test group, n = 23), a load cell was used to measure torque values (Newton centimeter, Ncm). Horizontal acceleration generated during procedures (control group, n = 10 and test group, n = 10) was compared between the groups. After ridge splitting, the alveolar crest width was significantly increased both in the control (1.23 ± 0.45 mm) and test (0.98 ± 0.41 mm) groups with no significant differences between the groups. The average impulse of the control group was 4.74 ± 1.05 Ns. Torque generated by rotation in the test group was 9.07 ± 2.15 Ncm. Horizontal acceleration was significantly less in the test group (0.82 ± 1.05 g) than the control group (64.07 ± 42.62 g) (P < 0.001). Narrow edentulous ridges can be expanded by novel engine-driven ridge spreaders. Within the limits of this study, the results suggested that an engine-driven ridge splitting technique may be less traumatic and less invasive than a conventional ridge splitting technique. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Fourth report on the Oak Ridge National Laboratory Biological Monitoring and Abatement Program for White Oak Creek Watershed and the Clinch River

DOE Office of Scientific and Technical Information (OSTI.GOV)

Loar, J.M.

1994-04-01

In response to a condition of the National Pollutant Discharge Elimination System (NPDES) permit issued to Oak Ridge National Laboratory (ORNL) on April 1, 1986, a Biological Monitoring and Abatement Program (BMAP) was developed for White Oak Creek (WOC) and selected tributaries. BMAP currently consists of six major tasks that address both radiological and nonradiological contaminants in the aquatic and terrestrial environs on-site and the aquatic environs off-site. These tasks are (1) toxicity monitoring, (2) bioaccumulation monitoring of nonradiological contaminants in aquatic biota, (3) biological indicator studies, (4) instream ecological monitoring, (5) assessment of contaminants in the terrestrial environment, andmore » (6) radioecology of WOC and White Oak Lake. The ecological characterization of the WOC watershed will provide baseline data that can be used to document the ecological effects of the water pollution control program and the remedial action program. The long-term nature of BMAP ensures that the effectiveness of remedial measures will be properly evaluated.« less

AmeriFlux US-NR1 Niwot Ridge Forest (LTER NWT1)

DOE Data Explorer

Blanken, Peter [University of Colorado

2016-01-01

This is the AmeriFlux version of the carbon flux data for the site US-NR1 Niwot Ridge Forest (LTER NWT1). Site Description - The Niwot Ridge AmeriFlux site is located in a subalpine forest ecosystem just below the Continental Divide near Nederland, CO. The site is located at 3050 m elevation, within 600m of the NOAA C1 long-term monitoring station, approximately 8 km east of the Continental Divide. The surrounding subalpine forest is ~97 years old and in a state of aggradation, having recovered from early twentieth century logging (Monson, et al. Global Change Biology (2002), 8 459-478).

Polygonal Ridge Networks on Mars

NASA Astrophysics Data System (ADS)

Kerber, Laura; Dickson, James; Grosfils, Eric; Head, James W.

2016-10-01

Polygonal ridge networks, also known as boxwork or reticulate ridges, are found in numerous locations and geological contexts across Mars. While networks formed from mineralized fractures hint at hot, possibly life-sustaining circulating ground waters, networks formed by impact-driven clasting diking, magmatic dikes, gas escape, or lava flows do not have the same astrobiological implications. Distinguishing the morphologies and geological context of the ridge networks sheds light on their potential as astrobiological and mineral resource sites of interest. The most widespread type of ridge morphology is characteristic of the Nili Fossae and Nilosyrtis region and consists of thin, criss-crossing ridges with a variety of heights, widths, and intersection angles. They are found in ancient Noachian terrains at a variety of altitudes and geographic locations and may be a mixture of clastic dikes, brecciated dikes, and mineral veins. They occur in the same general areas as valley networks and ancient lake basins, but they are not more numerous where these features are concentrated, and can appear in places where they morphologies are absent. Similarly, some of the ridge networks are associated with hydrated mineral detections, but some occur in locations without detections. Smaller, light-toned ridges of variable widths have been found in Gale Crater and other rover sites and are interpreted to be smaller version of the Nili-like ridges, in this case formed by the mineralization of fractures. This type of ridge is likely to be found in many other places on Mars as more high-resolution data becomes available. Hellas Basin is host to a third type of ridge morphology consisting of large, thick, light-toned ridges forming regular polygons at several superimposed scales. While still enigmatic, these are most likely to be the result of sediment-filled fractures. The Eastern Medusae Fossae Formation contains large swaths of a fourth, previously undocumented, ridge network type

The effect of fault-bend folding on seismic velocity in the marginal ridge of accretionary prisms

USGS Publications Warehouse

Cai, Y.; Wang, Chun-Yong; Hwang, W.-t.; Cochrane, G.R.

1995-01-01

Fluid venting in accretionary prisms, which feeds chemosynthetic biological communities, occurs mostly on the marginal thrust ridge. New seismic data for the marginal ridge of the Cascadia prism show significantly lower velocity than that in the adjacent oceanic basin and place important constraints on the interpretations of why fluid venting occurs mostly on the marginal ridge. We employed a finite-element method to analyze a typical fault-bend folding model to explain the phenomenon. The fault in the model is simulated by contact elements. The elements are characterized not only by finite sliding along a slide line, but also by elastoplastic deformation. We present the results of a stress analysis which show that the marginal ridge is under subhorizontal extension and the frontal thrust is under compression. This state of stress favors the growth of tensile cracks in the marginal ridge, facilitates fluid flow and reduces seismic velocities therein; on the other hand, it may close fluid pathways along the frontal thrust and divert fluid flow to the marginal ridge. ?? 1995 Birkha??user Verlag.

Deformation of Forearcs during Aseismic Ridge Subduction

NASA Astrophysics Data System (ADS)

Zeumann, S.; Hampel, A.

2014-12-01

Subduction of aseismic oceanic ridges causes considerable deformation of the forearc region. To identify the crucial parameters for forearc deformation we created 3D finite-element models representing both erosive and accretive forearcs as well as migrating and non-migrating ridges. As natural examples we choose the Cocos ridge subducting stationary beneath the erosive margin of Costa Rica and the Nazca and Gagua Ridges that migrate along the erosive Peruvian margin and the accretive accretive Ryukyu margin, respectively. A series of models show that the deformation of the forearc depends on the ridge shape (height, width), on the frictional coupling along the plate interface and the mechanical strength of the forearc. The forearc is uplifted and moved sideward during ridge subduction. Strain components show domains of both, shortening and extension. Along the ridge axis, extension occurs except at the ridge tip, where shortening prevails. The strain component normal to the ridge axis reveals extension at the ridge tip and contraction above the ridge flanks. Shortening and extension increase with increasing ridge height. Higher friction coefficients lead to less extension and more shortening. Accretive wedges show larger indentation at the model trench. For stationary ridges (Cocos Ridge) the deformation pattern of the forearc is symmetric with respect to the ridge axis whereas for migrating ridges (Nazca Ridge, Gagua Ridge) the oblique convergence direction leads to asymmetric deformation of the forearc. In case of ridge migration, uplift occurs at the leading flank of the ridge and subsidence at the trailing flank, in agreement with field observations and analogue models. For a model with a 200-km-wide and 1500-m-high ridge (i.e. similar to the dimensions of the Nazca Ridge), the modelled uplift rate at the southern ridge flank of the ridge is ~1 mm/a, which agrees well with uplift rates of ~0.7 mm/a derived from the elevation of marine terraces in southern Peru.

PROPAGATION AND LINKAGE OF OCEANIC RIDGE SEGMENTS.

USGS Publications Warehouse

Pollard, David D.; Aydin, Atilla

1984-01-01

An investigation was made of spreading ridges and the development of structures that link ridge segments using an analogy between ridges and cracks in elastic plates. The ridge-propagation force and a path factor that controls propagation direction were calculated for echelon ridge segments propagating toward each other. The ridge-propagation force increases as ridge ends approach but then declines sharply as the ends pass, so ridge segments may overlap somewhat. The sign of the path factor changes as ridge ends approach and pass, so the overlapping ridge ends may diverge and then converge following a hook-shaped path. The magnitudes of shear stresses in the plane of the plate and orientations of maximum shear planes between adjacent ridge segments were calculated to study transform faulting. For different loading conditions simulating ridge push, plate pull, and ridge suction, a zone of intense mechanical interaction between adjacent ridge ends in which stresses are concentrated was identified. The magnitudes of mean stresses in the plane of the plate and orientations of principal stress planes were also calculated.

Fine-Branched Ridges

NASA Image and Video Library

2015-10-14

This image from NASA Mars Reconnaissance Orbiter spacecraft shows numerous branching ridges with various degrees of sinuosity. These branching forms resemble tributaries funneling and draining into larger channel trunks towards the upper portion of the scene. The raised relief of these branching ridges suggests that these are ancient channels are inverted due to lithification and cementation of the riverbed sediment, which made it more resistant to erosion than the surrounding material. Wind-blown bedforms are abundant and resemble small ridges that are aligned in an approximately north-south direction. http://photojournal.jpl.nasa.gov/catalog/PIA20006

Fingermark ridge drift.

PubMed

De Alcaraz-Fossoul, Josep; Roberts, Katherine A; Feixat, Carme Barrot; Hogrebe, Gregory G; Badia, Manel Gené

2016-01-01

Distortions of the fingermark topography are usually considered when comparing latent and exemplar fingerprints. These alterations are characterized as caused by an extrinsic action, which affects entire areas of the deposition and alters the overall flow of a series of contiguous ridges. Here we introduce a novel visual phenomenon that does not follow these principles, named fingermark ridge drift. An experiment was designed that included variables such as type of secretion (eccrine and sebaceous), substrate (glass and polystyrene), and degrees of exposure to natural light (darkness, shade, and direct light) indoors. Fingermarks were sequentially visualized with titanium dioxide powder, photographed and analyzed. The comparison between fresh and aged depositions revealed that under certain environmental conditions an individual ridge could randomly change its original position regardless of its unaltered adjacent ridges. The causes of the drift phenomenon are not well understood. We believe it is exclusively associated with intrinsic natural aging processes of latent fingermarks. This discovery will help explain the detection of certain dissimilarities at the minutiae/ridge level; determine more accurate "hits"; identify potentially erroneous corresponding points; and rethink identification protocols, especially the criteria of "no single minutiae discrepancy" for a positive identification. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Contextual view of Point Bonita Ridge, showing Bonita Ridge access ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Contextual view of Point Bonita Ridge, showing Bonita Ridge access road retaining wall and location of Signal Corps Radar (S.C.R.) 296 Station 5 Transmitter Building foundation (see stake at center left), camera facing north - Fort Barry, Signal Corps Radar 296, Station 5, Transmitter Building Foundation, Point Bonita, Marin Headlands, Sausalito, Marin County, CA

Geospatial compilation of historical water-level altitudes in the Chicot and Evangeline aquifers 1977-2013 and Jasper aquifer 2000-13 in the Gulf Coast aquifer system, Houston-Galveston Region, Texas

USGS Publications Warehouse

Johnson, Michaela R.; Ellis, Robert H.H.

2013-01-01

Maps were georeferenced and digitized where existing geographic information system (GIS) data were unavailable (1977–89, 1991, 1995–99). Existing GIS data available for 1990, 1992–94, and 2000–13 were included in the geodatabase. The feature classes were organized into three feature datasets by principal aquifer: Chicot, Evangeline, and Jasper aquifers.

Hydrothermal Vents of Juan de Fuca Ridge

NASA Astrophysics Data System (ADS)

Stark, Joyce

As a member of REVEL (Research and Education: Volcanoes, Exploration and Life), I had an opportunity to participant in a scientific research cruise focused on the active volcanoes along the Juan de Fuca Ridge, the submarine spreading center off the Washington- Oregon-Canada coast. REVEL was sponsored by the National Science Foundation, University of Washington, Pennsylvania State University and the American Museum of Natural History. We studied the geological, chemical and biological processes associated with active hydrothermal systems and my research focused on the biological communities of the sulfide structures. We worked on board the Woods Hole Oceanographic Institution Vessel, R/V Atlantis and the submersible ALVIN was used to sample the "Black Smokers". As a member of the scientific party, I participated in collection and sorting of biological specimens from the vent communities, attended lectures by scientists, contributed to the cruise log website, maintained a journal and developed my own research project. It was my responsibility to bring this cutting-edge research back to the classroom.

Changing characteristics of arctic pressure ridges

NASA Astrophysics Data System (ADS)

Wadhams, Peter; Toberg, Nick

2012-04-01

The advent of multibeam sonar permits us to obtain full three-dimensional maps of the underside of sea ice. In particular this enables us to distinguish the morphological characteristics of first-year (FY) and multi-year (MY) pressure ridges in a statistically valid way, whereas in the past only a small number of ridges could be mapped laboriously by drilling. In this study pressure ridge distributions from two parts of the Arctic Ocean are compared, in both the cases using mainly data collected by the submarine “Tireless” in March 2007 during two specific grid surveys, in the Beaufort Sea at about 75° N, 140° W (N of Prudhoe Bay), and north of Ellesmere Island at about 83° 20‧ N, 64° W. In the Beaufort Sea the ice was mainly FY, and later melted or broke up as this area became ice-free during the subsequent summer. N of Ellesmere Island the ice was mainly MY. Ridge depth and spacing distributions were derived for each region using the boat's upward looking sonar, combined with distributions of shapes of the ridges encountered, using the Kongsberg EM3002 multibeam sonar. The differing shapes of FY and MY ridges are consistent with two later high-resolution multibeam studies of specific ridges by AUV. FY ridges are found to fit the normal triangular shape template in cross-section (with a range of slope angles averaging 27°) with a relatively constant along-crest depth, and often a structure of small ice blocks can be distinguished. MY ridges, however, are often split into a number of independent solid, smooth blocks of large size, giving an irregular ridge profile which may be seemingly without linearity. Our hypothesis for this difference is that during its long lifetime an MY ridge is subjected to several episodes of crack opening; new cracks in the Arctic pack often run in straight lines across the ridges and undeformed ice alike. Such a crack will open somewhat before refreezing, interpolating a stretch of thin ice into the structure, and breaking up

Variational Ridging in Sea Ice Models

NASA Astrophysics Data System (ADS)

Roberts, A.; Hunke, E. C.; Lipscomb, W. H.; Maslowski, W.; Kamal, S.

2017-12-01

This work presents the results of a new development to make basin-scale sea ice models aware of the shape, porosity and extent of individual ridges within the pack. We have derived an analytic solution for the Euler-Lagrange equation of individual ridges that accounts for non-conservative forces, and therefore the compressive strength of individual ridges. Because a region of the pack is simply a collection of paths of individual ridges, we are able to solve the Euler-Lagrange equation for a large-scale sea ice field also, and therefore the compressive strength of a region of the pack that explicitly accounts for the macro-porosity of ridged debris. We make a number of assumptions that have simplified the problem, such as treating sea ice as a granular material in ridges, and assuming that bending moments associated with ridging are perturbations around an isostatic state. Regardless of these simplifications, the ridge model is remarkably predictive of macro-porosity and ridge shape, and, because our equations are analytic, they do not require costly computations to solve the Euler-Lagrange equation of ridges on the large scale. The new ridge model is therefore applicable to large-scale sea ice models. We present results from this theoretical development, as well as plans to apply it to the Regional Arctic System Model and a community sea ice code. Most importantly, the new ridging model is particularly useful for pinpointing gaps in our observational record of sea ice ridges, and points to the need for improved measurements of the evolution of porosity of deformed ice in the Arctic and Antarctic. Such knowledge is not only useful for improving models, but also for improving estimates of sea ice volume derived from altimetric measurements of sea ice freeboard.

Ridge Jumps Associated with Plume-Ridge Interaction 1: Off-axis Heating due to Lithospheric Magma Penetration

NASA Astrophysics Data System (ADS)

Mittelstaedt, E.; Ito, G.

2005-12-01

In many hot spot-ridge systems, changes in the ridge axis geometry occur between the hot spot centers and nearby mid-ocean ridges in the form of ridge jumps. Such ridge jumps likely occur as a result of anomalous lithospheric stresses associated with mantle plume-lithosphere interaction, as well as weakening of the hot spot lithosphere due to physical and thermal thinning caused by rising buoyant asthenosphere and magma transport through the lithosphere. In this study, we use numerical models to quantify the effects of excess magmatism through the near-ridge lithosphere. Hot spot magmatism can weaken the lithosphere both mechanically through fracturing and thermally through conduction and advection of heat into the plate. Here we focus on the effects of thermal weakening. Using a plane-strain approximation, we examine deformation in a 2-D cross section of a visco-elastic-plastic lithosphere with the finite element code FLAC. The model has isothermal top and bottom boundaries and a prescribed velocity equal to the half spreading rate is imposed on the sides to drive seafloor spreading. The initial condition, as predicted for normal mid-ocean ridges, is a square root of lithospheric age cooling curve with a corner flow velocity field symmetric about the ridge axis. A range of heat inputs are introduced at various plate ages and spreading rates to simulate off-axis magma transport. To reveal the physical conditions that allow for a ridge jump and control its timing, we vary 4 parameters: spreading rate, lithospheric age, crustal thickness and heat input. Results indicate that the heating rate required to produce a ridge jump increases as a function of lithospheric age at the location of magma intrusion. The time necessary for a ridge jump to develop in lithosphere of a particular age decreases with increasing crustal thicknesses. For magma fluxes comparable to those estimated for Galapagos and Iceland, lithospheric heating by the penetrating magma alone is sufficient

27 CFR 9.182 - Ribbon Ridge.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Ribbon Ridge. (a) Name. The name of the viticultural area described in this section is “Ribbon Ridge.” (b) Approved Maps. The appropriate maps used to determine the boundaries of the Ribbon Ridge viticultural area... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Ribbon Ridge. 9.182...

27 CFR 9.182 - Ribbon Ridge.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Ribbon Ridge. (a) Name. The name of the viticultural area described in this section is “Ribbon Ridge.” (b) Approved Maps. The appropriate maps used to determine the boundaries of the Ribbon Ridge viticultural area... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Ribbon Ridge. 9.182...

Progressive serpentinization of the oceanic lithosphere from ridge to ridge flank: Consequences for biogeochemical cycles

NASA Astrophysics Data System (ADS)

Frueh-Green, G. L.; Boschi, C.

2011-12-01

Exposure of mantle rocks is an integral process of slow- and ultra-slow spreading ridges and ridge-flanks. Mantle-dominated lithosphere is a highly reactive chemical and thermal system, in which progressive interaction with seawater during serpentinization has significant geophysical, geochemical and biological consequences for the global marine system. This presentation is intended to provide an overview of serpentinization processes as fundamental to understanding the evolution of oceanic lithosphere formed at slow spreading ridges, fluid flow and the consequences of serpentinization for biogeochemical cycles. Seawater progressively reacts with peridotite, commonly as detachment faults unroof mantle material to the seafloor and serpentinites become dominant components of the ridge flanks. The mineral assemblages and textures of abyssal serpentinites typically record progressive, static hydration reactions that take place under a wide range of temperatures, lithospheric depths, fluid compositions and redox conditions. The products and sequence of serpentinization reactions are influenced by the time-integrated flux of seawater, bulk protolith compositions, the presence or absence of magmatic intrusions and/or trapped gabbroic melts, and structure (e.g., detachment faults, cataclastic fault zones). In turn, these factors influence mineral assemblages, fluid chemistry, and volatile contents. Serpentinization processes have major consequences for long-term, global geochemical fluxes by acting as a sink for H2O, Cl, B, U, S, and C from seawater and a source of Ca, Ni and possibly Cr to hydrothermal fluids, and by producing hydrogen-rich reduced fluids that are critical to sustain microbial communities. Seafloor weathering of serpentinized abyssal peridotites may also result in Mg loss and enhanced B uptake during clay mineral formation. The production of hydrogen during serpentinization is generally attributed to the formation of magnetite during olivine hydration and

Our Hidden Past: Biology, Part 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Ray; Congdon, Charles; Bervin, Barry

After World War II, vacant buildings at Y-12 and a growing new Biology Division for which there was not adequate space at Oak Ridge National Laboratory combined to provide a home for genetic research at Y-12. In January 1949, the Biology Division moved into Building 9210.

Ridge filter design and optimization for the broad-beam three-dimensional irradiation system for heavy-ion radiotherapy.

PubMed

Schaffner, B; Kanai, T; Futami, Y; Shimbo, M; Urakabe, E

2000-04-01

The broad-beam three-dimensional irradiation system under development at National Institute of Radiological Sciences (NIRS) requires a small ridge filter to spread the initially monoenergetic heavy-ion beam to a small spread-out Bragg peak (SOBP). A large SOBP covering the target volume is then achieved by a superposition of differently weighted and displaced small SOBPs. Two approaches were studied for the definition of a suitable ridge filter and experimental verifications were performed. Both approaches show a good agreement between the calculated and measured dose and lead to a good homogeneity of the biological dose in the target. However, the ridge filter design that produces a Gaussian-shaped spectrum of the particle ranges was found to be more robust to small errors and uncertainties in the beam application. Furthermore, an optimization procedure for two fields was applied to compensate for the missing dose from the fragmentation tail for the case of a simple-geometry target. The optimized biological dose distributions show that a very good homogeneity is achievable in the target.

Environmental baseline survey report for West Black Oak Ridge, East Black Oak Ridge, McKinney Ridge, West Pine Ridge and parcel 21D in the vicinity of the East Technology Park, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

King, David A.

2012-11-29

This environmental baseline survey (EBS) report documents the baseline environmental conditions of five land parcels located near the U.S. Department of Energy?s (DOE?s) East Tennessee Technology Park (ETTP), including West Black Oak Ridge, East Black Oak Ridge, McKinney Ridge, West Pine Ridge, and Parcel 21d. Preparation of this report included the detailed search of federal government records, title documents, aerial photos that may reflect prior uses, and visual inspections of the property and adjacent properties. Interviews with current employees involved in, or familiar with, operations on the real property were also conducted to identify any areas on the property wheremore » hazardous substances and petroleum products, or their derivatives, and acutely hazardous wastes may have been released or disposed. In addition, a search was made of reasonably obtainable federal, state, and local government records of each adjacent facility where there has been a release of any hazardous substance or any petroleum product or their derivatives, including aviation fuel and motor oil, and which is likely to cause or contribute to a release of any hazardous substance or any petroleum product or its derivatives, including aviation fuel or motor oil, on the real property. A radiological survey and soil/sediment sampling was conducted to assess baseline conditions of Parcel 21d that were not addressed by the soils-only no-further-investigation (NFI) reports. Groundwater sampling was also conducted to support a Parcel 21d decision. Based on available data West Black Oak Ridge, East Black Oak Ridge, McKinney Ridge, and West Pine Ridge are not impacted by site operations and are not subject to actions per the Federal Facility Agreement (FFA). This determination is supported by visual inspections, records searches and interviews, groundwater conceptual modeling, approved NFI reports, analytical data, and risk analysis results. Parcel 21d data, however, demonstrate impacts from

Ridges and tidal stress on Io

USGS Publications Warehouse

Bart, G.D.; Turtle, E.P.; Jaeger, W.L.; Keszthelyi, L.P.; Greenberg, R.

2004-01-01

Sets of ridges of uncertain origin are seen in twenty-nine high-resolution Galileo images, which sample seven locales on Io. These ridges are on the order of a few kilometers in length with a spacing of about a kilometer. Within each locale, the ridges have a consistent orientation, but the orientations vary from place to place. We investigate whether these ridges could be a result of tidal flexing of Io by comparing their orientations with the peak tidal stress orientations at the same locations. We find that ridges grouped near the equator are aligned either north-south or east-west, as are the predicted principal stress orientations there. It is not clear why particular groups run north-south and others east-west. The one set of ridges observed far from the equator (52?? S) has an oblique azimuth, as do the tidal stresses at those latitudes. Therefore, all observed ridges have similar orientations to the tidal stress in their region. This correlation is consistent with the hypothesis that tidal flexing of Io plays an important role in ridge formation. ?? 2004 Elsevier Inc. All rights reserved.

Geospatial compilation of historical water-level changes in the Chicot and Evangeline aquifers 1977-2013 and Jasper aquifer 2000-13, Gulf Coast aquifer system, Houston-Galveston region, Texas

USGS Publications Warehouse

Johnson, Michaela R.; Linard, Joshua I.

2014-01-01

The U.S. Geological Survey (USGS) in cooperation with the Harris-Galveston Subsidence District, City of Houston, Fort Bend Subsidence District, Lone Star Groundwater Conservation District, and Brazoria County Groundwater Conservation District has produced an annual series of reports that depict water-level changes in the Chicot, Evangeline, and Jasper aquifers of the Gulf Coast aquifer system in the Houston-Galveston region, Texas, from 1977 to 2013. Changes are determined from water-level measurements between December and March of each year from groundwater wells screened in one of the three aquifers. Existing published maps and unpublished geographic information system (GIS) datasets were compiled into a comprehensive geodatabase of all water-level-change maps produced as part of this multiagency effort. Annual water-level-change maps were georeferenced and digitized where existing GIS data were unavailable (1979–99). Existing GIS data available for 2000–13 were included in the geodatabase. The compilation contains 121 datasets showing water-level changes for each primary aquifer of the Gulf Coast aquifer system: 56 for the Chicot aquifer (1977; 1979–2013 and 1990; 1993–2013), 56 for the Evangeline aquifer (1977; 1979–2013 and 1990; 1993–2013), and 9 for the Jasper aquifer (2000; 2005–13).

Ridge 2000 Data Management System

NASA Astrophysics Data System (ADS)

Goodwillie, A. M.; Carbotte, S. M.; Arko, R. A.; Haxby, W. F.; Ryan, W. B.; Chayes, D. N.; Lehnert, K. A.; Shank, T. M.

2005-12-01

Hosted at Lamont by the marine geoscience Data Management group, mgDMS, the NSF-funded Ridge 2000 electronic database, http://www.marine-geo.org/ridge2000/, is a key component of the Ridge 2000 multi-disciplinary program. The database covers each of the three Ridge 2000 Integrated Study Sites: Endeavour Segment, Lau Basin, and 8-11N Segment. It promotes the sharing of information to the broader community, facilitates integration of the suite of information collected at each study site, and enables comparisons between sites. The Ridge 2000 data system provides easy web access to a relational database that is built around a catalogue of cruise metadata. Any web browser can be used to perform a versatile text-based search which returns basic cruise and submersible dive information, sample and data inventories, navigation, and other relevant metadata such as shipboard personnel and links to NSF program awards. In addition, non-proprietary data files, images, and derived products which are hosted locally or in national repositories, as well as science and technical reports, can be freely downloaded. On the Ridge 2000 database page, our Data Link allows users to search the database using a broad range of parameters including data type, cruise ID, chief scientist, geographical location. The first Ridge 2000 field programs sailed in 2004 and, in addition to numerous data sets collected prior to the Ridge 2000 program, the database currently contains information on fifteen Ridge 2000-funded cruises and almost sixty Alvin dives. Track lines can be viewed using a recently- implemented Web Map Service button labelled Map View. The Ridge 2000 database is fully integrated with databases hosted by the mgDMS group for MARGINS and the Antarctic multibeam and seismic reflection data initiatives. Links are provided to partner databases including PetDB, SIOExplorer, and the ODP Janus system. Improved inter-operability with existing and new partner repositories continues to be

Mid-ocean ridge jumps associated with hotspot magmatism

NASA Astrophysics Data System (ADS)

Mittelstaedt, Eric; Ito, Garrett; Behn, Mark D.

2008-02-01

Hotspot-ridge interaction produces a wide range of phenomena including excess crustal thickness, geochemical anomalies, off-axis volcanic ridges and ridge relocations or jumps. Ridges are recorded to have jumped toward many hotspots including, Iceland, Discovery, Galápagos, Kerguelen and Tristan de Cuhna. The causes of ridge jumps likely involve a number of interacting processes related to hotspots. One such process is reheating of the lithosphere as magma penetrates it to feed near-axis volcanism. We study this effect by using the hybrid, finite-element code, FLAC, to simulate two-dimensional (2-D, cross-section) viscous mantle flow, elasto-plastic deformation of the lithosphere and heat transport in a ridge setting near an off-axis hotspot. Heating due to magma transport through the lithosphere is implemented within a hotspot region of fixed width. To determine the conditions necessary to initiate a ridge jump, we vary four parameters: hotspot magmatic heating rate, spreading rate, seafloor age at the location of the hotspot and ridge migration rate. Our results indicate that the hotspot magmatic heating rate required to initiate a ridge jump increases non-linearly with increasing spreading rate and seafloor age. Models predict that magmatic heating, itself, is most likely to cause jumps at slow spreading rates such as at the Mid-Atlantic Ridge on Iceland. In contrast, despite the higher magma flux at the Galápagos hotspot, magmatic heating alone is probably insufficient to induce a ridge jump at the present-day due to the intermediate ridge spreading rate of the Galápagos Spreading Center. The time required to achieve a ridge jump, for fixed or migrating ridges, is found to be on the order of 10 5-10 6 years. Simulations that incorporate ridge migration predict that after a ridge jump occurs the hotspot and ridge migrate together for time periods that increase with magma flux. Model results also suggest a mechanism for ridge reorganizations not related to

Estimated rates of groundwater recharge to the Chicot, Evangeline and Jasper aquifers by using environmental tracers in Montgomery and adjacent counties, Texas, 2008 and 2011

USGS Publications Warehouse

Oden, Timothy D.; Truini, Margot

2013-01-01

Recharge rates estimated from environmental tracer data are dependent upon several hydrogeologic variables and have inherent uncertainties. By using the recharge estimates derived from samples collected from 14 wells completed in the Chicot aquifer for which apparent groundwater ages could be determined, recharge to the Chicot aquifer ranged from 0.2 to 7.2 inches (in.) per year (yr). Based on data from one well, estimated recharge to the unconfined zone of the Evangeline aquifer (outcrop) was 0.1 in./yr. Based on data collected from eight wells, estimated rates of recharge to the confined zone of the Evangeline aquifer ranged from less than 0.1 to 2.8 in./yr. Based on data from one well, estimated recharge to the unconfined zone of the Jasper aquifer (outcrop) was 0.5 in./yr. Based on data collected from nine wells, estimated rates of recharge to the confined zone of the Jasper aquifer ranged from less than 0.1 to 0.1 in./yr. The complexity of the hydrogeology in the area, uncertainty in the conceptual model, and numerical assumptions required in the determination of the recharge rates all pose limitations and need to be considered when evaluating these data on a countywide or regional scale. The estimated recharge rates calculated for this study are specific to each well location and should not be extrapolated or inferred as a countywide average. Local variations in the hydrogeology and surficial conditions can affect the recharge rate at a local scale.

Ridge Regression Signal Processing

NASA Technical Reports Server (NTRS)

Kuhl, Mark R.

1990-01-01

The introduction of the Global Positioning System (GPS) into the National Airspace System (NAS) necessitates the development of Receiver Autonomous Integrity Monitoring (RAIM) techniques. In order to guarantee a certain level of integrity, a thorough understanding of modern estimation techniques applied to navigational problems is required. The extended Kalman filter (EKF) is derived and analyzed under poor geometry conditions. It was found that the performance of the EKF is difficult to predict, since the EKF is designed for a Gaussian environment. A novel approach is implemented which incorporates ridge regression to explain the behavior of an EKF in the presence of dynamics under poor geometry conditions. The basic principles of ridge regression theory are presented, followed by the derivation of a linearized recursive ridge estimator. Computer simulations are performed to confirm the underlying theory and to provide a comparative analysis of the EKF and the recursive ridge estimator.

Sea ice ridging in the eastern Weddell Sea

NASA Astrophysics Data System (ADS)

Lytle, V. I.; Ackley, S. F.

1991-10-01

In August 1986, sea ice ridge heights and spatial frequency in the eastern Weddell Sea were measured using a ship-based acoustical sounder. Using a minimum ridge sail height of 0.75 m, a total of 933 ridges were measured along a track length of 415 km. The ridge frequency varied from 0.4 to 10.5 ridges km-1. The mean height of the ridges was found to be about 1.1 m regardless of the ridge frequency. These results are compared to other ridging statistics from the Ross Sea and found to be similar. Comparison with Arctic data, however, indicates that the height and frequency of the ridges are considerably less in the Weddell Sea than in the Arctic. Whereas in the Arctic the mean ridge height tends to increase with the ridge frequency, we found that this was not the case in the Weddell Sea, where the mean ridge height remained constant irrespective of the ridge frequency. Estimates of the contribution of deformed ice to the total ice thickness are generally low except for a single 53-km section where the ridge frequency increased by an order of magnitude. This resulted in an increase in the equivalent mean ice thickness due to ridging from 0.04 m in the less deformed areas to 0.45 m in the highly deformed section. These values were found to be consistent with values obtained from drilled profile lines during the same cruise.

[Comparative study of N, P output and eutrophication risk in runoff water in cross ridge and longitudinal ridge].

PubMed

Yu, Xing-Xiu; Ma, Qian; Liu, Qian-Jin; Lü, Guo-An

2011-02-01

Field in-situ rainfall simulation tests with two rainfall intensities (40 mm x h(-1) and 70 mm x h(-1)), which were conducted at typical sloping cropland in Yimeng mountainous area, were designed to analyze the output characteristics of dissolved inorganic nitrogen, Inorganic-N (NO3(-)-N, NH4(+) -N) and dissolved phosphorus (DP) in runoff water, as well as to compare the eutrophication risk in this water by calculating three ratios of Inorganic-N/DP, NO3(-) -N/DP, and NH4(+)-N/DP, respectively, in cross ridge and longitudinal ridge tillage methods. Results showed that, under the same rainfall intensity, the DP level in runoff water was higher in cross ridge than longitudinal ridge, while the change of different Inorganic-N level between the two tillage methods were not consistent. Cross ridge could effectively reduce runoff and the output rate of Inorganic-N and DP when compared to the longitudinal ridge tillage, which would be more outstanding with the increases of rainfall intensities. The losses of Inorganic-N and DP in runoff water were 43% and 5% less, respectively, in cross ridge than longitudinal ridge at the 40 mm x h(-1) rainfall intensity, and were 68% and 55%, respectively, at 70 mm x h(-1). The higher Inorganic-N/DP and NO3(-) -N/DP ratios suggest that runoff water from either cross ridge or longitudinal ridge tillage have a certain eutrophication risk, which present an increasing trend during the precipitation-runoff process. Compared with longitudinal ridge, cross ridge can not only hinder the increasing trend of eutrophication risk, but also can significantly lower it, and thus effectively reduce the effect of sloping cropland runoff on the eutrophication processes of receiving waters.

Comparison of buried sand ridges and regressive sand ridges on the outer shelf of the East China Sea

NASA Astrophysics Data System (ADS)

Wu, Ziyin; Jin, Xianglong; Zhou, Jieqiong; Zhao, Dineng; Shang, Jihong; Li, Shoujun; Cao, Zhenyi; Liang, Yuyang

2017-06-01

Based on multi-beam echo soundings and high-resolution single-channel seismic profiles, linear sand ridges in U14 and U2 on the East China Sea (ECS) shelf are identified and compared in detail. Linear sand ridges in U14 are buried sand ridges, which are 90 m below the seafloor. It is presumed that these buried sand ridges belong to the transgressive systems tract (TST) formed 320-200 ka ago and that their top interface is the maximal flooding surface (MFS). Linear sand ridges in U2 are regressive sand ridges. It is presumed that these buried sand ridges belong to the TST of the last glacial maximum (LGM) and that their top interface is the MFS of the LGM. Four sub-stage sand ridges of U2 are discerned from the high-resolution single-channel seismic profile and four strikes of regressive sand ridges are distinguished from the submarine topographic map based on the multi-beam echo soundings. These multi-stage and multi-strike linear sand ridges are the response of, and evidence for, the evolution of submarine topography with respect to sea-level fluctuations since the LGM. Although the difference in the age of formation between U14 and U2 is 200 ka and their sequences are 90 m apart, the general strikes of the sand ridges are similar. This indicates that the basic configuration of tidal waves on the ECS shelf has been stable for the last 200 ka. A basic evolutionary model of the strata of the ECS shelf is proposed, in which sea-level change is the controlling factor. During the sea-level change of about 100 ka, five to six strata are developed and the sand ridges develop in the TST. A similar story of the evolution of paleo-topography on the ECS shelf has been repeated during the last 300 ka.

Marginal ridge fracture resistance, microleakage and pulpal response to glass ionomer/glass cermet partial tunnel restorations.

PubMed

Prabhu, N T; Munshi, A K; Shetty, T R

1997-01-01

Sixty sound premolars which were to be extracted for orthodontic treatment purposes were restored either with glass ionomer cement or glass cermet cements after partial tunnel preparation, and prior to the extraction after a time interval of 30 and 60 days respectively. The teeth were then subjected to marginal ridge fracture resistance, microleakage study using dye penetration and histological evaluation of the pulpal response to these materials. Both the materials exhibited increase in marginal ridge fracture resistance at 60 days, with minimal degree of microleakage and were biologically compatible with the dental pulp.

Water-level altitudes 2009 and water-level changes in the Chicot, Evangeline, and Jasper Aquifers and compaction 1973-2008 in the Chicot and Evangeline Aquifers, Houston-Galveston Region, Texas

USGS Publications Warehouse

Kasmarek, Mark C.; Houston, Natalie A.; Ramage, Jason K.

2009-01-01

This report, done in cooperation with the Harris-Galveston Subsidence District, the City of Houston, the Fort Bend Subsidence District, and the Lone Star Groundwater Conservation District, is one in an annual series of reports that depicts water-level altitudes and water-level changes in the Chicot, Evangeline, and Jasper aquifers, and compaction in the Chicot and Evangeline aquifers in the Houston-Galveston region, Texas. The report (excluding appendixes) contains 16 sheets and 15 tables: 3 sheets are maps showing current-year (2009) water-level altitudes for each aquifer, respectively; 3 sheets are maps showing 1-year (2008-09) water-level changes for each aquifer, respectively; 3 sheets are maps showing 5-year (2004-09) water-level changes for each aquifer, respectively; 4 sheets are maps showing long-term (1990-2009 and 1977-2009) water-level changes for the Chicot and Evangeline aquifers, respectively; 1 sheet is a map showing long-term (2000-2009) water-level change for the Jasper aquifer; 1 sheet is a map showing site locations of borehole extensometers; and 1 sheet comprises graphs showing measured compaction of subsurface material at the sites from 1973 or later through 2008, respectively. Tables listing the data used to construct the aquifer-data maps and the compaction graphs are included.

Hydrologic controls on aperiodic spatial organization of the ridge-slough patterned landscape

NASA Astrophysics Data System (ADS)

Casey, Stephen T.; Cohen, Matthew J.; Acharya, Subodh; Kaplan, David A.; Jawitz, James W.

2016-11-01

A century of hydrologic modification has altered the physical and biological drivers of landscape processes in the Everglades (Florida, USA). Restoring the ridge-slough patterned landscape, a dominant feature of the historical system, is a priority but requires an understanding of pattern genesis and degradation mechanisms. Physical experiments to evaluate alternative pattern formation mechanisms are limited by the long timescales of peat accumulation and loss, necessitating model-based comparisons, where support for a particular mechanism is based on model replication of extant patterning and trajectories of degradation. However, multiple mechanisms yield a central feature of ridge-slough patterning (patch elongation in the direction of historical flow), limiting the utility of that characteristic for discriminating among alternatives. Using data from vegetation maps, we investigated the statistical features of ridge-slough spatial patterning (ridge density, patch perimeter, elongation, patch size distributions, and spatial periodicity) to establish more rigorous criteria for evaluating model performance and to inform controls on pattern variation across the contemporary system. Mean water depth explained significant variation in ridge density, total perimeter, and length : width ratios, illustrating an important pattern response to existing hydrologic gradients. Two independent analyses (2-D periodograms and patch size distributions) provide strong evidence against regular patterning, with the landscape exhibiting neither a characteristic wavelength nor a characteristic patch size, both of which are expected under conditions that produce regular patterns. Rather, landscape properties suggest robust scale-free patterning, indicating genesis from the coupled effects of local facilitation and a global negative feedback operating uniformly at the landscape scale. Critically, this challenges widespread invocation of scale-dependent negative feedbacks for explaining

Wrinkle ridges of Arcadia Planitia, Mars

NASA Technical Reports Server (NTRS)

Plescia, J. B.

1993-01-01

Wrinkle ridges of Arcadia Planitia were examined to determine their morphology, spatial distribution, and the amount of crustal shortening and strain they accommodate. Ridges trend generally northward, but their orientation and distribution are strongly controlled by the relief of the underlying hobby material. Ridges begin or end at inselbergs of older terrain and are associated with buried craters. Arcadia Planitia ridges have an average width of 3425 m and accommodate an average folding shortening of 3 m and a faulting shortening of 55 m; mean total shortening is 57 m. Three east-west transects were constructed at 20 deg 25 deg and 28 deg N to estimate regional shortening and strain. Average total shortening across the transects is about 900 m, corresponding to a regional compressive strain of 0.06 percent. The total shortening and compression across Arcadia Planitia are less than in Lungae Planum. Faults associated with the Arcadia ridges are inferred to have a westward dip compared with an eastward dip for Lungae Planum ridges. The general levels of compression and symmetric orientation of the ridges suggest a regionally organized stress system.

Trace elements in ocean ridge basalts

NASA Technical Reports Server (NTRS)

Kay, R. W.; Hubbard, N. J.

1978-01-01

A study is made of the trace elements found in ocean ridge basalts. General assumptions regarding melting behavior, trace element fractionation, and alteration effects are presented. Data on the trace elements are grouped according to refractory lithophile elements, refractory siderophile elements, and volatile metals. Variations in ocean ridge basalt chemistry are noted both for regional and temporal characteristics. Ocean ridge basalts are compared to other terrestrial basalts, such as those having La/Yb ratios greater than those of chondrites, and those having La/Yb ratios less than those of chondrites. It is found that (1) as compared to solar or chondrite ratios, ocean ridge basalts have low ratios of large, highly-charged elements to smaller less highly-charged elements, (2) ocean ridge basalts exhibit low ratios of volatile to nonvolatile elements, and (3) the transition metals Cr through Zn in ocean ridge basalts are not fractionated more than a factor of 2 or 3 from the chondritic abundance ratios.

Global survey of lunar wrinkle ridge formation times

NASA Astrophysics Data System (ADS)

Yue, Z.; Michael, G. G.; Di, K.; Liu, J.

2017-11-01

Wrinkle ridges are a common feature of the lunar maria and record subsequent contraction of mare infill. Constraining the timing of wrinkle ridge formation from crater counts is challenging because they have limited areal extent and it is difficult to determine whether superposed craters post-date ridge formation or have alternatively been uplifted by the deformation. Some wrinkle ridges do allow determination to be made. This is possible where a ridge shows a sufficiently steep boundary or scarp that can be identified as deforming an intersecting crater or the crater obliterates the relief of the ridge. Such boundaries constitute only a small fraction of lunar wrinkle ridge structures yet they are sufficiently numerous to enable us to obtain statistically significant crater counts over systems of structurally related wrinkle ridges. We carried out a global mapping of mare wrinkle ridges, identifying appropriate boundaries for crater identification, and mapping superposed craters. Selected groups of ridges were analyzed using the buffered crater counting method. We found that, except for the ridges in mare Tranquilitatis, the ridge groups formed with average ages between 3.5 and 3.1 Ga ago, or 100-650 Ma after the oldest observable erupted basalts where they are located. We interpret these results to suggest that local stresses from loading by basalt fill are the principal agent responsible for the formation of lunar wrinkle ridges, as others have proposed. We find a markedly longer interval before wrinkle ridge formation in Tranquilitatis which likely indicates a different mechanism of stress accumulation at this site.

Using AVIRIS images to measure temporal trends in abundance of photosynthetic and nonphotosynthetic canopy components

NASA Technical Reports Server (NTRS)

Ustin, Susan L.; Smith, Milton O.; Roberts, Dar; Gamon, John A.; Field, Christopher B.

1992-01-01

The Jasper Ridge Biological Preserve, Stanford, California is a good example of hardwood rangeland ecosystems in California. Structurally, it is composed of a mosaic of serpentine grasslands, oak savannah, coastal chaparral, and mixed evergreen woodland, representing a broad cross-section of physiognomic classes. The Mediterranean climate produces an extended seasonal drought lasting throughout most of the growing season and has significant impact on the expression of divergent phenological patterns related to contrasting ecological strategies of these taxa. The region is well understood biologically due to the rich history of ecological research at the site. Thus, community characteristics, physiological characteristics, phenology, and temporal dynamics are reasonably well understood for many of the dominant species. Because of its proximity to NASA Ames Research Center, it has been subject to a large number of aircraft data acquisitions over many years. A more complete examination of this database would provide an opportunity to test current remote sensing hypotheses for measurement and detection of ecological attributes, particularly those involving canopy chemistry and physiology. Better definition of ecological rules might permit development of remotely sensed surrogate variables for biological properties that cannot be directly measured or measured with sufficient accuracy.

Ridge interaction features of the Line Islands

NASA Astrophysics Data System (ADS)

Konter, J. G.; Koppers, A. A. P.; Storm, L. P.

2016-12-01

The sections of Pacific absolute plate motion history that precede the Hawaii-Emperor and Louisville chains are based on three chains: the Line Islands-Mid-Pacific Mountains, the Hess Rise-Shatsky Rise, and the Marshall Islands-Wake Islands (Rurutu hotspot). Although it has been clear that the Line Islands do not define a simple age progression (e.g. Schlanger et al., 1984), the apparent similarity to the Emperor Seamount geographic trend has been used to extend the overall Hawaii-Emperor track further into the past. However, we show here that plate tectonic reconstructions suggest that the Mid-Pacific Mountains (MPMs) and Line Islands (LIs) were erupted near a mid-ocean ridge, and thus these structures do not reflect absolute plate motion. Moverover, the morphology and geochemistry of the volcanoes show similarities with Pukapuka Ridge (e.g. Davis et al., 2002) and the Rano Rahi seamounts, presumed to have a shallow origin. Modern 40Ar/39Ar ages show that the LIs erupted at various times along the entire volcanic chain. The oldest structures formed within 10 Ma of plate formation. Given the short distance to the ridge system, large aseismic volcanic ridges, such as Necker Ridge and Horizon Guyot may simply reflect a connection between MPMs and the ridge, similar to the Pukapuka Ridge. The Line Islands to the south (including Karin Ridge) define short subchains of elongated seamounts that are widespread, resembling the Rano Rahi seamount field. During this time, the plate moved nearly parallel to the ridge system. The change from few large ridges to many subchains may reflect a change in absolute plate motion, similar to the Rano Rahi field. Here, significant MPMs volcanism is no longer connected to the ridge along plate motion. Similar to Pukapuka vs. Rano Rahi, the difference in direction between plate motion and the closest ridge determines whether larger ridges or smaller seamount subchains are formed. The difference between the largest structures (MPMs and LIs

Surface radiological investigations at White Wing Scrap Yard, Oak Ridge Reservation, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, J.K.; Rodriguez, R.E.; Uziel, M.S.

1991-09-01

A surface radiological scoping survey of accessible areas at the White Wing Scrap Yard (Waste Area Grouping 11 (WAG 11)) was conducted intermittently from December 1989 through July 1991 by members of the Measurement Applications and Development Group, Health and Safety Research Division, Oak Ridge National Laboratory (ORNL) at the request of Environmental Restoration Program personnel at ORNL. The White Wing Scrap Yard is an estimated 30-acre, predominately wooded area located on the western edge of East Fork Ridge in the McNew Hollow area on the US Department of Energy's Oak Ridge Reservation. The scrap yard was formerly used formore » aboveground storage of contaminated material (e.g., steel tanks, metal, glass, concrete, and miscellaneous industrial trash) from the Oak Ridge K-25 Site, Oak Ridge Y-12 Plant, and ORNL. The purposes of this cursory investigation were (1) to provide an updated contamination status of the site by locating and interpreting the presence, nature, and extent of surface radiological contamination and (2) to provide a basis for the formulation of interim corrective action to limit human exposures to radioactivity and minimize the potential for contaminant dispersion. 13 refs., 17 figs., 5 tabs.« less

Periodontal considerations for esthetics: edentulous ridge augmentation.

PubMed

Rosenberg, E S; Cutler, S A

1993-01-01

Edentulous ridge augmentation is a plastic surgical technique that is performed to improve patient esthetics when unsightly, deformed ridges exist. This article describes the etiology of ridge deformities and the many procedures that can be executed to achieve an esthetic, functional result. Historically, soft-tissue mucogingival techniques were described to augment collapsed ridges. Pedicle grafts, free soft-tissue grafts, and subepithelial connective tissue grafts are predictable forms of therapy. More recently, ridge augmentation techniques were developed that regenerate the lost periodontium. These include allografts, bioglasses, guided tissue regenerative procedures, and tissue expansion.

Effects on Ridge Segmentation, Magmatic Plumbing and Eruption Style Caused by Weak Hot-spot to Ridge Interaction: the Central Indian Ridge and Rodrigues Hot-spot Couplet.

NASA Astrophysics Data System (ADS)

Murton, B. J.; Parson, L. M.; Sauter, D.

2001-12-01

The intermediate spreading, Central Indian Ridge (CIR) forms a couplet with a weak hot-spot of which the Rodrigues archipelago is an expression. Recently collected bathymetry shows that despite having little in the way of a significant topographic swell, the hot-spot is associated with a change in offset sense across adjacent transforms of the CIR causing the ridge to draw nearer to the Rodrigues island system. The most proximal ridge segment of the CIR is over 20km long and comprises three non-transform bounded sub-segments. The most northerly sub-segment has a shallow (<3000m), narrow (<5km) and featureless flat rift valley. TOBI sidescan sonar imagery shows that the segment is host to a 15km-long, 5km-wide single sheet flow. Elsewhere in the segment the valley floor is characterised by long (>5km), narrow (<1km) ridges that often terminate in conical seamounts. These ridges are the loci of some of the acoustically freshest volcanic facies in the rift valley. Samples recovered from these ridges have similar petrology along strike. With increasing distance south along the CIR, the ridge segments are typically 500m deeper than to the north. Here they are about 75km long and bounded by transform offsets that are 50 km long. However, even in the deepest parts of these segments, where the axial floor is over 4000m deep at the ridge-transform-intersections, there is fresh lava and other evidence for abundant volcanic activity. Within these segments, the rift valley comprises mainly seamounts and hummocky volcanic features. We believe the westward stepping trend of the CIR towards the Rodrigues islands is a function of the hot spot. The elevated temperature and volatile content to the west reduces mantle viscosity which, combined with thinner and hence weaker lithosphere, influencec the loci of initial oceanic rifting and the relative position of the ridge axis. The unusually great length of the northern segment has a similar origin with the presence of thin and weak

Carslberg Ridge and Mid-Atlantic Ridge: Slow-spreading Apparent Analogs

NASA Astrophysics Data System (ADS)

Rona, P. A.; Murton, B. J.; Bostrom, K.; Widenfalk, L.; Melson, W. G.; O'Hearn, T.; Cronan, D. S.; Jenkins, W. J.

2005-12-01

We compare morphology, tectonics, petrology, and hydrothermal activity of a known section of the Mid-Atlantic Ridge (MAR) between the Kane and Atlantis fracture zones (full multi-beam coverage 21N to 31N) to the lesser known Carlsberg Ridge (CR; limited multi-beam coverage plus satellite altimetry). The CR extends from the Owen Fracture Zone (10N) to the Vityaz Fracture Zone (5S) and spreads at half-rates (~1.2-1.8 cm/yr) similar to the MAR: 1) Morphology: Both ridges exhibit distinct segmentation (primarily sinistral) and axial valleys with high floor to crest relief (range 1122-1771 m). Average lengths of segments (CR: 70 km; MAR: 50 km) and crest-to crest width of the axial valley are greater on the CR (40 km) than MAR (23 km). Axial volcanic ridges form the neovolcanic zone on both ridges, typically 2.6 km wide and 213 m high on the CR. Average water depth near segment centers is greater on the MAR (3933 m) than the CR (3564 m). V-shaped patterns oblique to the spreading axis are present on both ridges. 2) Tectonics: Segments on each ridge are predominantly separated by short-offset (<30 km) non-transform discontinuities with longer transform faults generally spaced hundreds of kilometers apart. Bulls-eye Mantle Bouguer Lows (-30 to -50 mgal) are present at centers of spreading segments on both ridges. Metamorphic core complexes of lower crust and upper mantle are present on the MAR section (at fracture zones) and at least at one locality at 58.33E on the CR. 3) Petrology: MORB composition from our 20 stations along the CR fall into the MORB family, with no evidence of hotspot inputs (no excess K or Nb), or extreme fractionation, similar to the MAR section. REE and trace element patterns between 57E and 61E on the CR indicate increasing melt depletion to the northwest, while glasses exhibit a striking systematic increase in MgO (decrease in fractionation) to the northwest and attain among the most primitive composition of any ocean ridge adjacent to the Owen

Ridge jumps associated with plume-ridge interaction: Mantle plume-lithosphere interaction and hotspot magmatism

NASA Astrophysics Data System (ADS)

Mittelstaedt, E.; Ito, G.

2007-12-01

Interaction of mantle plumes and young lithosphere near mid-ocean ridges can lead to changes in spreading geometry by shifts of the ridge-axis toward the plume as seen at various hotspots, notably Iceland and the Galapagos. Previous work has shown that, with a sufficient magma flux, heating of the lithosphere by magmatism can significantly weaken the plate and, in some cases, could cause ridge jumps. Upwelling hot asthenosphere can also weaken the plate through thermal and mechanical thinning of the lithosphere. Using the finite element code CITCOM, we solve the equations of continuity, momentum and energy to examine deformation in near-ridge lithosphere associated with relatively hot upwelling asthenosphere and seafloor spreading. The mantle and lithosphere obey a non-Newtonian viscous rheology with plastic failure in the cold part of the lithosphere simulated by imposing an effective yield stress. Temperatures of the lithospheric thermal boundary region are initially given a square-root of age thermal profile while a hot patch is placed at the bottom to initiate a mantle-plume like upwelling. The effect of upwelling asthenosphere on ridge jumps is evaluated by varying three parameters: the plume excess temperature, the spreading rate and the distance of the plume from the ridge axis. Preliminary results show plume related thinning and weakening of the lithosphere over a wide area (100's of km's) with the rate of thinning increasing with the excess temperature of the plume. Initially, thinning occurs as the plume approaches the lithosphere and asthenospheric material is forced out of the way. As the plume material comes into contact with the lithosphere, thinning occurs through heating and mechanical removal of the thermal boundary layer. Thinning of the lithosphere is one of the primary factors in achieving a ridge jump. Another is large tensile stresses which can facilitate the initiation of rifting at this weakened location. Model stresses induced by the

Large-scale deformation associated with ridge subduction

USGS Publications Warehouse

Geist, E.L.; Fisher, M.A.; Scholl, D. W.

1993-01-01

Continuum models are used to investigate the large-scale deformation associated with the subduction of aseismic ridges. Formulated in the horizontal plane using thin viscous sheet theory, these models measure the horizontal transmission of stress through the arc lithosphere accompanying ridge subduction. Modelling was used to compare the Tonga arc and Louisville ridge collision with the New Hebrides arc and d'Entrecasteaux ridge collision, which have disparate arc-ridge intersection speeds but otherwise similar characteristics. Models of both systems indicate that diffuse deformation (low values of the effective stress-strain exponent n) are required to explain the observed deformation. -from Authors

Volcanoclastics of the Walvis Ridge

NASA Astrophysics Data System (ADS)

Eroshenko, D. V.; Kharin, G. S.

2018-03-01

The paper generalizes the distribution of volcanoclastic material in the Cenozoic sedimentary cover of the Walvis Ridge, made on the basis of the DSDP (Deep Sea Drilling Projects) and ODP (Ocean Drilling Program). The cycles of volcanoclastic accumulation have been distinguished. It has been proved that the distribution of the material in the Paleogene primary reflects the dynamics of volcanism of the ridge itself. The sources of volcanoclastics have been determined. The possibility of the existence of Early Eocene submarine volcanoes in the central part of the ridge has been shown. The dynamics of volcanism of the ridge has been compared with the variability of major climatic markers in sediments, indicating the unity of volcanic processes in the region and processes that led to an increase in the index of 13C content in sediments and CO2 content in the atmosphere.

Resource management plan for the Oak Ridge Reservation. Volume 30, Oak Ridge National Environmental Research Park natural areas and reference areas--Oak Ridge Reservation environmentally sensitive sites containing special plants, animals, and communities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pounds, L.R.; Parr, P.D.; Ryon, M.G.

1993-08-01

Areas on the Oak Ridge Reservation (ORR) that contain rare plant or animal species or are special habitats are protected through National Environmental Research Park Natural Area (NA) or Reference Area (RA) designations. The US Department of Energy`s Oak Ridge National Environmental Research Park program is responsible for identifying species of vascular plants that are endangered, threatened, or rare and, as much as possible, for conserving those areas in which such species grow. This report includes a listing of Research Park NAs and RAs with general habitat descriptions and a computer-generated map with the areas identified. These are the locationsmore » of rare plant or animal species or special habitats that are known at this time. As the Reservation continues to be surveyed, it is expected that additional sites will be designated as Research Park NAs or RAs. This document is a component of a larger effort to identify environmentally sensitive areas on ORR. This report identifies the currently known locations of rare plant species, rare animal species, and special biological communities. Floodplains, wetlands (except those in RAs or NAs), and cultural resources are not included in this report.« less

Oak Ridge Reservation annual site environmental report for 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koncinski, W.S.

1996-09-01

This report presents the details of the environmental monitoring and management program for the Oak Ridge Reservation. Topics discussed include: site background, climate, and operations; environmental compliance strategies; effluent monitoring; environmental management program including environmental restoration, decontamination and decommissioning, technology development, and public involvement; effluent monitoring of airborne discharges, liquid discharges, toxicity control and monitoring, biological monitoring and abatement; environmental surveillance which encompasses meteorological monitoring, ambient air monitoring, surface water monitoring, soils monitoring, sediment monitoring, and contamination of food stuffs monitoring; radiation doses; chemical exposures; ground water monitoring; and quality assurance.

Base-flow characteristics of streams in the Valley and Ridge, Blue Ridge, and Piedmont physiographic provinces of Virginia

USGS Publications Warehouse

Nelms, D.L.; Harlow, G.E.; Hayes, Donald C.

1995-01-01

Growth within the Valley and Ridge, Blue Ridge, and Piedmont Physiographic Provinces of Virginia has focussed concern about allocation of surface-water flow and increased demands on the ground-water resources. The purpose of this report is to (1) describe the base-flow characteristics of streams, (2) identify regional differences in these flow characteristics, and (3) describe, if possible, the potential surface-water and ground-water yields of basins on the basis of the base-flow character- istics. Base-flow characteristics are presented for streams in the Valley and Ridge, Blue Ridge, and Piedmont Physiographic Provinces of Virginia. The provinces are separated into five regions: (1) Valley and Ridge, (2) Blue Ridge, (3) Piedmont/Blue Ridge transition, (4) Piedmont northern, and (5) Piedmont southern. Different flow statistics, which represent streamflows predominantly comprised of base flow, were determined for 217 continuous-record streamflow-gaging stations from historical mean daily discharge and for 192 partial-record streamflow-gaging stations by means of correlation of discharge measurements. Variability of base flow is represented by a duration ratio developed during this investigation. Effective recharge rates were also calculated. Median values for the different flow statistics range from 0.05 cubic foot per second per square mile for the 90-percent discharge on the streamflow-duration curve to 0.61 cubic foot per second per square mile for mean base flow. An excellent estimator of mean base flow for the Piedmont/Blue Ridge transition region and Piedmont southern region is the 50-percent discharge on the streamflow-duration curve, but tends to under- estimate mean base flow for the remaining regions. The base-flow variability index ranges from 0.07 to 2.27, with a median value of 0.55. Effective recharge rates range from 0.07 to 33.07 inches per year, with a median value of 8.32 inches per year. Differences in the base-flow characteristics exist between

Emergence and petrology of the Mendocino Ridge

NASA Astrophysics Data System (ADS)

Fisk, Martin R.; Duncan, Robert A.; Fox, Christopher G.; Witter, Jeffrey B.

1993-11-01

The Mendocino Fracture Zone, a 3,000-km-long transform fault, extends from the San Andreas Fault at Cape Mendocino, California due west into the central Pacific basin. The shallow crest of this fracture zone, known as the Mendocino Ridge, rises to within 1,100 m of the sea surface at 270 km west of the California Coast. Rounded basalt pebbles and cobbles, indicative of a beach environment, are the dominant lithology at two locations on the crest of Mendocino Ridge and a40Ar/39 Ar incremental heating age of 11.0 ± 1.0 million years was determined for one of the these cobbles. This basalt must have been erupted on the Gorda Ridge because the crust immediately to the south of the fracture zone is older than 27 Ma. This age also implies that the crest of Mendocino Ridge was at sea level and would have blocked Pacific Ocean eastern boundary currents and affected the climate of the North American continent at some time since the late Miocene. Basalts from the Mendocino Fracture Zone (MFZ) are FeTi basalts similar to those commonly found at intersections of mid-ocean ridges and fracture zones. These basalts are chemically distinct from the nearby Gorda Ridge but they could have been derived from the same mantle source as the Gorda Ridge basalts. The location of the 11 Ma basalt suggests that Mendocino Ridge was transferred from the Gorda Plate to the Pacific Plate and the southern end of Gorda Ridge was truncated by a northward jump in the transform fault of MFZ.

Vulnerability assessment of skiing-dependent businesses to the effects of climate change in Banff and Jasper National Parks, Canada

NASA Astrophysics Data System (ADS)

Reynolds, David Michael

This qualitative study examines the potential positive and negative socio-economic impacts that may emerge from the long-term effects of climate change on skiing-dependent businesses in Banff and Jasper National Parks, Canada. My goal was to determine whether or not skiing-related tourism in the parks in the 2020s and 2050s is more or less socio-economically vulnerable to the effects of climate change on snow cover, temperatures and ski season length at ski resorts in the parks. My study explored the level of awareness and personal perceptions of 60 skiing-dependent business managers about how the impact of climate change on ski resorts may influence future socio-economics of ski tourism businesses. I employed a vulnerability assessment approach and adopted some elements of grounded theory. My primary data sources are interviews with managers and the outcome of the geographical factors index (GFI). Supporting methods include: an analysis and interpretation of climate model data and an interpretation of the economic analysis of skiing in the parks. The interview data were sorted and coded to establish concepts and findings by interview questions, while the GFI model rated and ranked 24 regional ski resorts in the Canadian Cordillera. The findings answered the research questions and helped me conclude what the future socio-economic vulnerability may be of skiing-dependent businesses in the parks. The interviews revealed that managers are not informed about climate change and they have not seen any urgency to consider the effects on business. The GFI revealed that the ski resorts in the parks ranked in the top ten of 24 ski resorts in the Cordillera based on 14 common geographical factors. The economic reports suggest skiing is the foundation of the winter economy in the parks and any impact on skiing would directly impact other skiing-dependent businesses. Research indicates that the effects of climate change may have less economic impact on skiing

Hydrothermal Activity Along the Central Indian Ridge: Ridges, Hotspots and Philately.

NASA Astrophysics Data System (ADS)

German, C. R.; Connelly, D. P.; Evans, A. J.; Murton, B. J.; Curewitz, D.; Okino, K.; Statham, P. J.; Parson, L. M.

2001-12-01

The global mid-ocean ridge crest extends 50-60,000km and the majority remains unexplored for hydrothermal activity. Even those areas which are reasonably familiar continue to spring surprises (e.g. the "Lost City" site found in late 2000). Within the confines of conceivable research budgets, therefore, choosing new areas for investigation and exploration demands an intelligent approach, beyond flicking through holiday brochures or identifying missing entries for the John Edmond Memorial Stamp Collection. With that caveat, the Southampton Oceanography Centre led a 10-week expedition to the Central Indian Ridge, earlier this year, based in and around Mauritius. During cruise CD127 (23 April-23 May) we conducted a systematic investigation of the ridge crest (seafloor and overlying water column) between 18 deg 16 min and 20 deg 49 min South. We chose this area to investigate the distribution of hydrothermal activity both close to, and away from, that section of the ridge crest which continues to reflect past influence of the migrating Rodrigues hot-spot. Our hypothesis was that the high incidence of hydrothermal activity we had located previously, near the Azores Triple Junction, may result from waning influence of the Azores Hot-Spot nearby and that similar effects might be found resulting from interaction of the CIR with the Rodrigues hot-spot. The primary scientific package we employed was the SOC's TOBI deep-tow sidescan vehicle, now up-graded with an extra Light Scattering Sensor string. In concert, this instrumentation allowed us to prospect for particle-laden hydrothermal plumes in the water column overlying the ridge-crest, in real-time, whilst simultaneously acquiring high-resolution sidescan images of the underlying seafloor. Using this approach, particle-rich anomalies were observed at 5 locations along ca. 300km of surveyed ridge-crest, including 4 sites all within the extended (hot-spot influenced) segment 15, which stretches from 18 deg 45 to 20 deg 14

Dark and Bright Ridges on Europa

NASA Technical Reports Server (NTRS)

1998-01-01

This high-resolution image of Jupiter's moon Europa, taken by NASA's Galileo spacecraft camera, shows dark, relatively smooth region at the lower right hand corner of the image which may be a place where warm ice has welled up from below. The region is approximately 30 square kilometers in area. An isolated bright hill stands within it. The image also shows two prominent ridges which have different characteristics; youngest ridge runs from left to top right and is about 5 kilometers in width (about 3.1 miles). The ridge has two bright, raised rims and a central valley. The rims of the ridge are rough in texture. The inner and outer walls show bright and dark debris streaming downslope, some of it forming broad fans. This ridge overlies and therefore must be younger than a second ridge running from top to bottom on the left side of the image. This dark 2 km wide ridge is relatively flat, and has smaller-scale ridges and troughs along its length.

North is to the top of the picture, and the sun illuminates the surface from the upper left. This image, centered at approximately 14 degrees south latitude and 194 degrees west longitude, covers an area approximately 15 kilometers by 20 kilometers (9 miles by 12 miles). The resolution is 26 meters (85 feet) per picture element. This image was taken on December 16, 1997 at a range of 1300 kilometers (800 miles) by Galileo's solid state imaging system.

The Jet Propulsion Laboratory, Pasadena, CA manages the Galileo mission for NASA's Office of Space Science, Washington, DC. JPL is an operating division of California Institute of Technology (Caltech).

This image and other images and data received from Galileo are posted on the World Wide Web, on the Galileo mission home page at URL http://www.jpl.nasa.gov/ galileo.

Remedial Investigation Report on Chestnut Ridge Operable Unit 2 (Filled Coal Ash Pond/Upper McCoy Branch) at the Oak Ridge Y-12 Plant, Oak Ridge, Tennessee. Volume 1. Main Text

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-08-01

This document is a report on the remedial investigation (RI) of Chestnut Ridge Operable Unit (OU) 2 at the Oak Ridge Y-12 Plant. Chestnut Ridge OU 2 consists of Upper McCoy Branch (UMB), the Filled Coal Ash Pond (FCAP), and the area surrounding the Sluice Channel formerly associated with coal ash disposal in the FCAP. Chestnut Ridge OU 2 is located within the U.S. Department of Energy`s (DOE`s) Oak Ridge Reservation in Anderson County, Tennessee, approximately 24 miles west of Knoxville. The pond is an 8.5-acre area on the southern slope of Chestnut Ridge, 0.5 mile south of the mainmore » Y-12 Plant and geographically separated from the Y-12 Plant by Chestnut Ridge. The elevation of the FCAP is {approximately} 950 ft above mean sea level (msl), and it is relatively flat and largely vegetated. Two small ponds are usually present at the northeast and northwest comers of the FCAP. The Sluice Channel Area extends {approximately}1000 ft from the northern margin of the FCAP to the crest of Chestnut Ridge, which has an elevation of {approximately}1100 ft above msl. The Sluice Channel Area is largely vegetated also. McCoy Branch runs from the top of Chestnut Ridge across the FCAP into Rogers Quarry and out of the quarry where it runs a short distance into Milton Hill Lake at McCoy Embayment, termed UMB. The portion south of Rogers Quarry, within Chestnut Ridge OU 4, is termed Lower McCoy Branch. The DOE Oak Ridge Y-12 Plant disposed of coal ash from its steam plant operations as a slurry that was discharged into an ash retention impoundment; this impoundment is the FCAP. The FCAP was built in 1955 to serve as a settling basin after coal ash slurried over Chestnut Ridge from the Y-12 Plant. The FCAP was constructed by building an earthen dam across the northern tributary of McCoy Branch. The dam was designed to hold 20 years of Y-12 steam plant ash. By July 1967, ash had filled up the impoundment storage behind the dam to within 4 ft of the top.« less

Comprehensive integrated planning: A process for the Oak Ridge Reservation, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-05-01

The Oak Ridge Comprehensive Integrated Plan is intended to assist the US Department of Energy (DOE) and contractor personnel in implementing a comprehensive integrated planning process consistent with DOE Order 430.1, Life Cycle Asset Management and Oak Ridge Operations Order 430. DOE contractors are charged with developing and producing the Comprehensive Integrated Plan, which serves as a summary document, providing information from other planning efforts regarding vision statements, missions, contextual conditions, resources and facilities, decision processes, and stakeholder involvement. The Comprehensive Integrated Plan is a planning reference that identifies primary issues regarding major changes in land and facility use andmore » serves all programs and functions on-site as well as the Oak Ridge Operations Office and DOE Headquarters. The Oak Ridge Reservation is a valuable national resource and is managed on the basis of the principles of ecosystem management and sustainable development and how mission, economic, ecological, social, and cultural factors are used to guide land- and facility-use decisions. The long-term goals of the comprehensive integrated planning process, in priority order, are to support DOE critical missions and to stimulate the economy while maintaining a quality environment.« less

National Biological Service Research Supports Watershed Planning

USGS Publications Warehouse

Snyder, Craig D.

1996-01-01

The National Biological Service's Leetown Science Center is investigating how human impacts on watershed, riparian, and in-stream habitats affect fish communities. The research will provide the basis for a Ridge and Valley model that will allow resource managers to accurately predict and effectively mitigate human impacts on water quality. The study takes place in the Opequon Creek drainage basin of West Virginia. A fourth-order tributary of the Potomac, the basin falls within the Ridge and Valley. The study will identify biological components sensitive to land use patterns and the condition of the riparian zone; the effect of stream size, location, and other characteristics on fish communities; the extent to which remote sensing can reliable measure the riparian zone; and the relationship between the rate of landscape change and the structure of fish communities.

Evidence for microbial carbon and sulfur cycling in deeply buried ridge flank basalt

USGS Publications Warehouse

Lever, Mark A.; Rouxel, Olivier; Alt, Jeffrey C.; Shimizu, Nobumichi; Ono, Shuhei; Coggon, Rosalind M.; Shanks, Wayne C.; Lapham, Laura; Elvert, Marcus; Prieto-Mollar, Xavier; Hinrichs, Kai-Uwe; Inagaki, Fumio; Teske, Andreas

2013-01-01

Sediment-covered basalt on the flanks of mid-ocean ridges constitutes most of Earth's oceanic crust, but the composition and metabolic function of its microbial ecosystem are largely unknown. By drilling into 3.5-million-year-old subseafloor basalt, we demonstrated the presence of methane- and sulfur-cycling microbes on the eastern flank of the Juan de Fuca Ridge. Depth horizons with functional genes indicative of methane-cycling and sulfate-reducing microorganisms are enriched in solid-phase sulfur and total organic carbon, host δ13C- and δ34S-isotopic values with a biological imprint, and show clear signs of microbial activity when incubated in the laboratory. Downcore changes in carbon and sulfur cycling show discrete geochemical intervals with chemoautotrophic δ13C signatures locally attenuated by heterotrophic metabolism.

Does Graft Particle Type and Size Affect Ridge Dimensional Changes After Alveolar Ridge Split Procedure?

PubMed

Kheur, Mohit G; Kheur, Supriya; Lakha, Tabrez; Jambhekar, Shantanu; Le, Bach; Jain, Vinay

2018-04-01

The absence of an adequate volume of bone at implant sites requires augmentation procedures before the placement of implants. The aim of the present study was to assess the ridge width gain with the use of allografts and biphasic β-tricalcium phosphate with hydroxyapatite (alloplast) in ridge split procedures, when each were used in small (0.25 to 1 mm) and large (1 to 2 mm) particle sizes. A randomized controlled trial of 23 subjects with severe atrophy of the mandible in the horizontal dimension was conducted in a private institute. The patients underwent placement of 49 dental implants after a staged ridge split procedure. The patients were randomly allocated to alloplast and allograft groups (predictor variable). In each group, the patients were randomly assigned to either small graft particle or large graft particle size (predictor variable). The gain in ridge width (outcome variable) was assessed before implant placement. A 2-way analysis of variance test and the Student unpaired t test were used for evaluation of the ridge width gain between the allograft and alloplast groups (predictor variable). Differences were considered significant if P values were < .05. The sample included 23 patients (14 men and 9 women). The patients were randomly allocated to the alloplast (n = 11) or allograft (n = 12) group before the ridge split procedure. In each group, they were assigned to a small graft particle or large graft particle size (alloplast group, small particle in 5 and large particle size in 6 patients; allograft group, small particle in 6 and large particle size in 6). A statistically significant difference was observed between the 2 graft types. The average ridge width gain was significantly greater in the alloplast group (large, 4.40 ± 0.24 mm; small, 3.52 ± 0.59 mm) than in the allograft group (large, 3.82 ± 0.19 mm; small, 2.57 ± 0.16 mm). For both graft types (alloplast and allograft), the large particle size graft resulted in a

Compressive strain in Lunae Planum-shortening across wrinkle ridges

NASA Technical Reports Server (NTRS)

Plescia, J. B.

1991-01-01

Wrinkle ridges have long been considered to be structural or structurally controlled features. Most, but not all, recent studies have converged on a model in which wrinkle ridges are structural features formed under compressive stress; the deformation being accommodated by faulting and folding. Given that wrinkle ridges are compressive tectonic features, an analysis of the associated shortening and strain provides important quantitative information about local and regional deformation. Lunae Planum is dominated by north-south trending ridges extending from Kasei Valles in the north to Valles Marineris in the south. To quantify the morphometric character, a photoclinometric study was undertaken for ridges on Lunae Planum using the Davis and Soderblom. More than 25 ridges were examined between long. 57 and 80 deg, lat. 5 to 25 deg N. For each ridge, several profiles were obtained along its length. Ridge width, total relief, and elevation offset were measured for each ridge. Analyses are given.

Ridges and scarps in the equatorial belt of Mars

USGS Publications Warehouse

Lucchitta, B.K.; Klockenbrink, J.L.

1981-01-01

The morphology and distribution of ridges and scarps on Mars in the ?? 30?? latitude belt were investigated. Two distinct types of ridges were recognized. The first is long and linear, resembling mare ridges on the Moon; it occurs mostly in plains areas. The other is composed of short, anastomosing segments and occurs mostly in ancient cratered terrain and intervening plateaus. Where ridges are eroded, landscape configurations suggest that they are located along regional structures. The age of ridges is uncertain, but some are as young as the latest documented volcanic activity on Mars. The origins of ridges are probably diverse-they may result from wrinkling due to compression or from buckling due to settling over subsurface structures. The similar morphologic expressions of ridge types of various origins may be related to a similar deformation mechanism caused by two main factors: (1) most ridges are developed in thick layers of competent material and (2) ridges formed under stresses near a free surface. ?? 1981 D. Reidel Publishing Co.

Geophysical Characteristics of the Australian-Antarctic Ridge

NASA Astrophysics Data System (ADS)

Kim, S. S.; Lin, J.; Park, S. H.; Choi, H.; Lee, S. M.

2014-12-01

Between 2011 and 2013, the Korea Polar Research Institute (KOPRI) conducted three consecutive geologic surveys at the little explored eastern ends of the Australian-Antarctic Ridge (AAR) to characterize the tectonics, geochemistry, and hydrothermal activity of this intermediate spreading system. Using the Korean icebreaker R/V Araon, the multi-disciplinary research team collected bathymetry, gravity, magnetics, and rock and water column samples. In addition, Miniature Autonomous Plume Recorders (MAPRs) were deployed at wax-core rock sampling sites to detect the presence of active hydrothermal vents. Here we present a detailed analysis of a 300-km-long supersegment of the AAR to quantify the spatial variations in ridge morphology and robust axial and off-axis volcanisms. The ridge axis morphology alternates between rift valleys and axial highs within relatively short ridge segments. To obtain a geological proxy for regional variations in magma supply, we calculated residual mantle Bouguer gravity anomalies (RMBA), gravity-derived crustal thickness, and residual topography for seven sub-segments. The results of the analyses revealed that the southern flank of the AAR is associated with shallower seafloor, more negative RMBA, thicker crust, and/or less dense mantle than the conjugate northern flank. Furthermore, this north-south asymmetry becomes more prominent toward the KR1 supersegment of the AAR. The axial topography of the KR1 supersegment exhibits a sharp transition from axial highs at the western end to rift valleys at the eastern end, with regions of axial highs being associated with more magma supply as indicated by more negative RMBA. We also compare and contrast the characteristics of the AAR supersegment with that of other ridges of intermediate spreading rates, including the Juan de Fuca Ridge, Galápagos Spreading Center, and Southeast Indian Ridge west of the Australian-Antarctic Discordance, to investigate the influence of ridge-hotspot interaction on

36 CFR 7.34 - Blue Ridge Parkway.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 36 Parks, Forests, and Public Property 1 2013-07-01 2013-07-01 false Blue Ridge Parkway. 7.34... REGULATIONS, AREAS OF THE NATIONAL PARK SYSTEM § 7.34 Blue Ridge Parkway. (a) Snowmobiles. After consideration... waters of the Blue Ridge Parkway is prohibited except on the waters of Price Lake. (2) Vessels using...

36 CFR 7.34 - Blue Ridge Parkway.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 36 Parks, Forests, and Public Property 1 2014-07-01 2014-07-01 false Blue Ridge Parkway. 7.34... REGULATIONS, AREAS OF THE NATIONAL PARK SYSTEM § 7.34 Blue Ridge Parkway. (a) Snowmobiles. After consideration... waters of the Blue Ridge Parkway is prohibited except on the waters of Price Lake. (2) Vessels using...

36 CFR 7.34 - Blue Ridge Parkway.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 36 Parks, Forests, and Public Property 1 2012-07-01 2012-07-01 false Blue Ridge Parkway. 7.34... REGULATIONS, AREAS OF THE NATIONAL PARK SYSTEM § 7.34 Blue Ridge Parkway. (a) Snowmobiles. After consideration... waters of the Blue Ridge Parkway is prohibited except on the waters of Price Lake. (2) Vessels using...

Volcanism and hydrothermalism on a hotspot-influenced ridge: Comparing Reykjanes Peninsula and Reykjanes Ridge, Iceland

NASA Astrophysics Data System (ADS)

Pałgan, Dominik; Devey, Colin W.; Yeo, Isobel A.

2017-12-01

Current estimates indicate that the number of high-temperature vents (one of the primary pathways for the heat extraction from the Earth's mantle) - at least 1 per 100 km of axial length - scales with spreading rate and should scale with crustal thickness. But up to present, shallow ridge axes underlain by thick crust show anomalously low incidences of high-temperature activity. Here we compare the Reykjanes Ridge, an abnormally shallow ridge with thick crust and only one high-temperature vent known over 900 km axial length, to the adjacent subaerial Reykjanes Peninsula (RP), which is characterized by high-temperature geothermal sites confined to four volcanic systems transected by fissure swarms with young (Holocene) volcanic activity, multiple faults, cracks and fissures, and continuous seismic activity. New high-resolution bathymetry (gridded at 60 m) of the Reykjanes Ridge between 62°30‧N and 63°30‧N shows seven Axial Volcanic Ridges (AVR) that, based on their morphology, geometry and tectonic regime, are analogues for the volcanic systems and fissure swarms on land. We investigate in detail the volcano-tectonic features of all mapped AVRs and show that they do not fit with the previously suggested 4-stage evolution model for AVR construction. Instead, we suggest that AVR morphology reflects the robust or weak melt supply to the system and two (or more) eruption mechanisms may co-exist on one AVR (in contrast to 4-stage evolution model). Our interpretations indicate that, unlike on the Reykjanes Peninsula, faults on and around AVRs do not cluster in orientation domains but all are subparallel to the overall strike of AVRs (orthogonal to spreading direction). High abundance of seamounts shows that the region centered at 62°47‧N and 25°04‧W (between AVR-5 and -6) is volcanically robust while the highest fault density implies that AVR-1 and southern part of AVR-6 rather undergo period of melt starvation. Based on our observations and interpretations we

Ridges on Europa

NASA Image and Video Library

1997-12-18

This view of Jupiter's moon Europa shows a portion of the surface that has been highly disrupted by fractures and ridges. This picture covers an area about 238 kilometers (150 miles) wide by 225 kilometers (140 miles), or about the distance between Los Angeles and San Diego. Symmetric ridges in the dark bands suggest that the surface crust was separated and filled with darker material, somewhat analogous to spreading centers in the ocean basins of Earth. Although some impact craters are visible, their general absence indicates a youthful surface. The youngest ridges, such as the two features that cross the center of the picture, have central fractures, aligned knobs, and irregular dark patches. These and other features could indicate cryovolcanism, or processes related to eruption of ice and gases. This picture, centered at 16 degrees south latitude, 196 degrees west longitude, was taken at a distance of 40,973 kilometers (25,290 mi) on November 6, 1996 by the Galileo spacecraft solid state imaging television camera onboard the Galileo spacecraft during its third orbit around Jupiter. http://photojournal.jpl.nasa.gov/catalog/PIA00518

Petrological systematics of mid-ocean ridge basalts: Constraints on melt generation beneath ocean ridges

NASA Astrophysics Data System (ADS)

Langmuir, Charles H.; Klein, Emily M.; Plank, Terry

Mid-ocean ridge basalts (MORB) are a consequence of pressure-release melting beneath ocean ridges, and contain much information concerning melt formation, melt migration and heterogeneity within the upper mantle. MORB major element chemical systematics can be divided into global and local aspects, once they have been corrected for low pressure fractionation and interlaboratory biases. Regional average compositions for ridges unaffected by hot spots ("normal" ridges) can be used to define the global correlations among normalized Na2O, FeO, TiO2 and SiO2 contents, CaO/Al2O3 ratios, axial depth and crustal thickness. Back-arc basins show similar correlations, but are offset to lower FeO and TiO2 contents. Some hot spots, such as the Azores and Galapagos, disrupt the systematics of nearby ridges and have the opposite relationships between FeO, Na2O and depth over distances of 1000 km. Local variations in basalt chemistry from slow- and fast-spreading ridges are distinct from one another. On slow-spreading ridges, correlations among the elements cross the global vector of variability at a high angle. On the fast-spreading East Pacific Rise (EPR), correlations among the elements are distinct from both global and slow-spreading compositional vectors, and involve two components of variation. Spreading rate does not control the global correlations, but influences the standard deviations of axial depth, crustal thickness, and MgO contents of basalts. Global correlations are not found in very incompatible trace elements, even for samples far from hot spots. Moderately compatible trace elements for normal ridges, however, correlate with the major elements. Trace element systematics are significantly different for the EPR and the mid-Atlantic Ridge (MAR). Normal portions of the MAR are very depleted in REE, with little variability; hot spots cause large long wavelength variations in REE abundances. Normal EPR basalts are significantly more enriched than MAR basalts from normal

How Fast Do Europa's Ridges Grow?

NASA Astrophysics Data System (ADS)

Melosh, H. J.; Turtle, E. P.; Freed, A. M.

2017-11-01

We demonstrate with our incremental wedging model of ridge formation that ridges must grow in 5000 years or less to prevent their material flowing down an underlying warm ice channel. This conclusion holds for other models as well.

Mantle plume capture, anchoring and outflow during ridge interaction

NASA Astrophysics Data System (ADS)

Gibson, S. A.; Richards, M. A.; Geist, D.

2015-12-01

Geochemical and geophysical studies have shown that >40% of the world's mantle plumes are currently interacting with the global ridge system and such interactions may continue for up to 180 Myr[1]. At sites of plume-ridge interaction up to 1400 km of the spreading centre is influenced by dispersed plume material but there are few constraints on how and where the ridge-ward transfer of deep-sourced material occurs, and also how it is sustained over long time intervals. Galápagos is an archetypal example of an off-axis plume and sheds important light on these mechanisms. The Galápagos plume stem is located ~200 km south of the spreading axis and its head influences 1000 km of the ridge. Nevertheless, the site of enriched basalts, greatest crustal thickness and elevated topography on the ridge, together with active volcanism in the archipelago, correlate with a narrow zone (~150 km) of low-velocity, high-temperature mantle that connects the plume stem and ridge at depths of ~100 km[2]. The enriched ridge basalts contain a greater amount of partially-dehydrated, recycled oceanic crust than basalts elsewhere on the spreading axis, or indeed basalts erupted in the region between the plume stem and ridge. The presence of these relatively volatile-rich ridge basalts requires flow of plume material below the peridotite solidus (i.e.>80 km). We propose a 2-stage model for the development and sustainment of a confined zone of deep ridge-ward plume flow. This involves initial on-axis capture and establishment of a sub-ridge channel of plume flow. Subsequent anchoring of the plume stem to a contact point on the ridge during axis migration results in confined ridge-ward flow of plume material via a deep network of melt channels embedded in the normal spreading and advection of the plume head[2]. Importantly, sub-ridge flow is maintained. The physical parameters and styles of mantle flow we have defined for Galápagos are less-well known at other sites of plume-ridge

Stress history and geotechnical properties of sediment from the Cape Fear Diapir, Blake Ridge Diapir, and Blake Ridge

USGS Publications Warehouse

Winters, W.J.

2000-01-01

Geotechnical properties of sediment from Ocean Drilling Program Leg 164 are presented as: (1) normalized shipboard strength ratios from the Cape Fear Diapir, the Blake Ridge Diapir, and the Blake Ridge; and (2) Atterberg limit, vane shear strength, pocket-penetrometer strength, and constant-rate-of-strain consolidation results from Hole 995A, located on the Blake Ridge. This study was conducted to understand the stress history in a region characterized by high sedimentation rates and the presence of gas hydrates. Collectively, the results indicate that sediment from the Blake Ridge exhibits significant underconsolidated behavior, except near the seafloor. At least 10 m of additional overburden was removed by erosion or mass wasting at Hole 993A on the Cape Fear Diapir, compared to nearby sites.

Wrinkle Ridges and Young Fresh Crater

NASA Image and Video Library

2002-06-04

This NASA Mars Odyssey image is of the ridged plains of Lunae Planum in the northern hemisphere of Mars. Wrinkle ridges, a very common landform on Mars, Mercury, Venus, and the Moon, are found mostly along the eastern side of the image.

Observations of sea ice ridging in the Weddell Sea

NASA Astrophysics Data System (ADS)

Granberg, Hardy B.; Leppaäranta, Matti

1999-11-01

Sea ice surface topography data were obtained by helicopter-borne laser profiling during the First Finnish Antarctic Expedition (FINNARP-89). The measurements were made near the ice margin at about 73°S, 27°W in the eastern Weddell Sea on December 31, 1989, and January 1, 1990. Five transects, ranging in length from 127 to 163 km and covering a total length of 724 km, are analyzed. With a lower cutoff of 0.91 m the overall ridge frequency was 8.4 ridges/km and the average ridge height was 1.32 m. The spatial variations in ridging were large; for 36 individual 20-km segments the frequencies were 2-16 ridges/km and the mean heights were 1.16-1.56 m. The frequencies and mean heights were weakly correlated. The distributions of the ridge heights followed the exponential distribution; the spacings did not pass tests for either the exponential or the lognormal distribution, but the latter was much closer. In the 20-km segments the areally averaged thickness of ridged ice was 0.51±0.28 m, ranging from 0.10 to 1.15 m. The observed ridge size and frequency are greater than those known for the Ross Sea. Compared with the central Arctic, the Weddell Sea ridging frequencies are similar but the ridge heights are smaller, possibly as a result of differences in snow accumulation.

Improved Digitization of Lunar Mare Ridges with LROC Derived Products

NASA Astrophysics Data System (ADS)

Crowell, J. M.; Robinson, M. S.; Watters, T. R.; Bowman-Cisneros, E.; Enns, A. C.; Lawrence, S.

2011-12-01

Lunar wrinkle ridges (mare ridges) are positive-relief structures formed from compressional stress in basin-filling flood basalt deposits [1]. Previous workers have measured wrinkle ridge orientations and lengths to investigate their spatial distribution and infer basin-localized stress fields [2,3]. Although these plots include the most prominent mare ridges and their general trends, they may not have fully captured all of the ridges, particularly the smaller-scale ridges. Using Lunar Reconnaissance Orbiter Wide Angle Camera (WAC) global mosaics and derived topography (100m pixel scale) [4], we systematically remapped wrinkle ridges in Mare Serenitatis. By comparing two WAC mosaics with different lighting geometry, and shaded relief maps made from a WAC digital elevation model (DEM) [5], we observed that some ridge segments and some smaller ridges are not visible in previous structure maps [2,3]. In the past, mapping efforts were limited by a fixed Sun direction [6,7]. For systematic mapping we created three shaded relief maps from the WAC DEM with solar azimuth angles of 0°, 45°, and 90°, and a fourth map was created by combining the three shaded reliefs into one, using a simple averaging scheme. Along with the original WAC mosaic and the WAC DEM, these four datasets were imported into ArcGIS, and the mare ridges of Imbrium, Serenitatis, and Tranquillitatis were digitized from each of the six maps. Since the mare ridges are often divided into many ridge segments [8], each major component was digitized separately, as opposed to the ridge as a whole. This strategy enhanced our ability to analyze the lengths, orientations, and abundances of these ridges. After the initial mapping was completed, the six products were viewed together to identify and resolve discrepancies in order to produce a final wrinkle ridge map. Comparing this new mare ridge map with past lunar tectonic maps, we found that many mare ridges were not recorded in the previous works. It was noted

Europa Ridges, Hills and Domes

NASA Technical Reports Server (NTRS)

1997-01-01

This moderate-resolution view of the surface of one of Jupiter's moons, Europa, shows the complex icy crust that has been extensively modified by fracturing and the formation of ridges. The ridge systems superficially resemble highway networks with overpasses, interchanges and junctions. From the relative position of the overlaps, it is possible to determine the age sequence for the ridge sets. For example, while the 8-kilometer-wide (5-mile) ridge set in the lower left corner is younger than most of the terrain seen in this picture, a narrow band cuts across the set toward the bottom of the picture, indicating that the band formed later. In turn, this band is cut by the narrow 2- kilometer-wide (1.2-mile) double ridge running from the lower right to upper left corner of the picture. Also visible are numerous clusters of hills and low domes as large as 9 kilometers (5.5 miles) across, many with associated dark patches of non-ice material. The ridges, hills and domes are considered to be ice-rich material derived from the subsurface. These are some of the youngest features seen on the surface of Europa and could represent geologically young eruptions.

This area covers about 140 kilometers by 130 kilometers (87 miles by 81 miles) and is centered at 12.3 degrees north latitude, 268 degrees west longitude. Illumination is from the east (right side of picture). The resolution is about 180 meters (200 yards) per pixel, meaning that the smallest feature visible is about a city block in size. The picture was taken by the Solid State Imaging system on board the Galileo spacecraft on February 20, 1997, from a distance of 17,700 kilometers (11,000 miles) during its sixth orbit around Jupiter.

The Jet Propulsion Laboratory, Pasadena, CA, manages the mission for NASA's Office of Space Science, Washington D.C. This image and other images and data received from Galileo are posted on the World Wide Web Galileo mission home page at http://galileo.jpl.nasa.gov.

Ridge and Talus in Lycus Sulci

NASA Image and Video Library

2015-08-12

This image from NASA Mars Reconnaissance Orbiter spacecraft nicely captures several influential geologic processes that have shaped the landscape of Lycus Sulci. Our observation covers an area of about 7.5 by 5.4 kilometers in Lycus Sulci, located just to the northwest of Olympus Mons in the Tharsis region of Mars. "Sulci" is a Latin term meaning "furrow" or "groove." In this case, Lycus Sulci is a region comprised of a series of depressions and ridges. Like most of the Tharsis region, Lycus Sulci exhibits thick deposits of light-toned Martian dust; the slopes on ridges in this region feature abundant streaks. These streaks are long, thin dark-toned features. They appear when the superficial light-tone fine-grained materials (i.e., Martian dust) suddenly move down slope and expose the darker underlying volcanic surfaces. Repeat imaging shows that dust streaks are consistently dark when they are initially formed and become lighter over time. This is due to the steady deposition of dust from the atmosphere. Slope streaks are also visible along the slopes of ridges and shallow depressions. Two ridges here exhibit partially exposed bedrock. These outcrops are interpreted to still have abundant coatings and dust, obscuring the underlying bedrock. This interpretation is based on the lack of bluish color for volcanic bedrock from the infrared-red-blue swath of our camera, and consistent with the homogenous tannish color we see throughout the same swath. It's possible that the ridges here and throughout the Lycus Sulci region formed via volcanic and tectonic processes, which have been further sculpted by wind erosion and other mass wasting processes. For example, talus slopes, which appear as fine-grained fans or conical-shaped deposits, originate from the steepest portions of the ridges. These form when the rocks or deposits on the steepest slopes of a ridge fail under the influence of Martian gravity and their own mass, causing an avalanche of these materials, which then

Geology along the Blue Ridge Parkway in Virginia

USGS Publications Warehouse

Carter, Mark W.; Southworth, C. Scott; Tollo, Richard P.; Merschat, Arthur J.; Wagner, Sara; Lazor, Ava; Aleinikoff, John N.

2017-01-01

Detailed geologic mapping and new SHRIMP (sensitive high-resolution ion microprobe) U-Pb zircon, Ar/Ar, Lu-Hf, 14C, luminescence (optically stimulated), thermochronology (fission-track), and palynology reveal the complex Mesoproterozoic to Quaternary geology along the ~350 km length of the Blue Ridge Parkway in Virginia. Traversing the boundary of the central and southern Appalachians, rocks along the parkway showcase the transition from the para-autochthonous Blue Ridge anticlinorium of northern and central Virginia to the allochthonous eastern Blue Ridge in southern Virginia. From mile post (MP) 0 near Waynesboro, Virginia, to ~MP 124 at Roanoke, the parkway crosses the unconformable to faulted boundary between Mesoproterozoic basement in the core of the Blue Ridge anticlinorium and Neoproterozoic to Cambrian metasedimentary and metavolcanic cover rocks on the western limb of the structure. Mesoproterozoic basement rocks comprise two groups based on SHRIMP U-Pb zircon geochronology: Group I rocks (1.2-1.14 Ga) are strongly foliated orthogneisses, and Group II rocks (1.08-1.00 Ga) are granitoids that mostly lack obvious Mesoproterozoic deformational features.Neoproterozoic to Cambrian cover rocks on the west limb of the anticlinorium include the Swift Run and Catoctin Formations, and constituent formations of the Chilhowee Group. These rocks unconformably overlie basement, or abut basement along steep reverse faults. Rocks of the Chilhowee Group are juxtaposed against Cambrian rocks of the Valley and Ridge province along southeast- and northwest-dipping, high-angle reverse faults. South of the James River (MP 64), Chilhowee Group and basement rocks occupy the hanging wall of the nearly flat-lying Blue Ridge thrust fault and associated splays.South of the Red Valley high-strain zone (MP 144.5), the parkway crosses into the wholly allochthonous eastern Blue Ridge, comprising metasedimentary and meta-igneous rocks assigned to the Wills Ridge, Ashe, and Alligator

Lithospheric Flexural Modeling of Iapetus' Equatorial Ridge

NASA Astrophysics Data System (ADS)

Zheng, W.; Ip, W.-H.; Teng, L. S.

2012-04-01

Iapetus, which is one of Saturn's ball-shaped satellites, has some unique features in the Solar System. This satellite has a mean radius of 735 km, and there is an approximately 20-kilometer-high mountain lying precisely on its equator. The mountain is known as an "equatorial ridge" since it makes Iapetus appear walnut shaped. The origin of the equatorial ridge is attributed to several hypotheses, including different endogenesis and exogenesis processes. In this work, we attempted to construct a flexural model of the equatorial ridge using elastic lithosphere theory. The equatorial ridge is treated as a linear load which exerts uniform force on Iapetus' hard shell (i.e. elastic lithosphere of Iapetus). To calculate the deflection of surface, we use the Digital Terrain Model (DTM) data of Iapetus' leading side published by Giese et al. (2008). Giese et al. also pointed out that the elastic lithospheric thickness of Iapetus must exceed 100 km to support the ridge without deflecting. However, we found possible evidence in the DTM data that implied deflection. There are two sites of surface depression on the northern side of the equatorial ridge. The few-kilometer deflection implies a thinner lithosphere than previous suggested. Assume that the thickness of elastic lithosphere is only 5% below of the radius of Iapetus, so the flat-Earth and one-plate condition could adapt to the flexure model of Iapetus. Based on analysis of the distance between a bulge and the ridge, the calculated lithospheric thickness is 6-10 km. The new result seems controversial, but the modeled surface profile is highly consistent with numerical ridge DTM profile extracted from Giese et al. (2008). Thinner lithosphere also supports the contraction model proposed by Sandwell and Schubert (2010) since the bucking harmonic degree increases. In the other hand, the transformation layer between hard shell and plastic inner core may need constraint on thermal history or crystal form of ice. In

Ridge Orientations of the Ridge-Forming Unit, Sinus Meridiani, Mars-A Fluvial Explanation

NASA Technical Reports Server (NTRS)

Wilkinson, M. Justin; Herridge, A.

2013-01-01

Imagery and MOLA data were used in an analysis of the ridge-forming rock unit (RFU) exposed in Sinus Meridiani (SM). This unit shows parallels at different scales with fluvial sedimentary bodies. We propose the terrestrial megafan as the prime analog for the RFU, and likely for other members of the layered units. Megafans are partial cones of fluvial sediment, with radii up to hundreds of km. Although recent reviews of hypotheses for the RFU units exclude fluvial hypotheses [1], inverted ridges in the deserts of Oman have been suggested as putative analogs for some ridges [2], apparently without appreciating The wider context in which these ridges have formed is a series of megafans [3], a relatively unappreciated geomorphic feature. It has been argued that these units conform to the megafan model at the regional, subregional and local scales [4]. At the regional scale suites of terrestrial megafans are known to cover large areas at the foot of uplands on all continents - a close parallel with the setting of the Meridiani sediments at the foot of the southern uplands of Mars, with its incised fluvial systems leading down the regional NW slope [2, 3] towards the sedimentary units. At the subregional scale the layering and internal discontinuities of the Meridiani rocks are consistent, inter alia, with stacked fluvial units [4]. Although poorly recognized as such, the prime geomorphic environment in which stream channel networks cover large areas, without intervening hillslopes, is the megafan [see e.g. 4]. Single megafans can reach 200,000 km2 [5]. Megafans thus supply an analog for areas where channel-like ridges (as a palimpsest of a prior landscape) cover the intercrater plains of Meridiani [6]. At the local, or river-reach scale, the numerous sinuous features of the RFU are suggestive of fluvial channels. Cross-cutting relationships, a common feature of channels on terrestrial megafans, are ubiquitous. Desert megafans show cemented paleo-channels as inverted

New data of the Gakkel Ridge seismicity

NASA Astrophysics Data System (ADS)

Antonovskaya, Galina; Basakina, Irina; Kremenetskaya, Elena

2016-04-01

250 earthquakes were recorded in the Gakkel Ridge during the period 2012-2014 by Arkhangelsk seismic network. The magnitude Ml of these earthquakes is 1.5 - 5.7, 70% of them have Ml up to 3.0. Seismic events are arranged along to a narrow center line of the Mid-Arctic Ridge, most of the earthquakes are confined to the southern board of the Ridge. Presumably it's connected with the reflection of spreading processes. The high seismic activity zones, which we associate with the volcano-tectonic processes, have been identified. Have been recorded 13 events per day in the Western Volcanic Zone. The largest number of events (75%) is confined to the Sparsely Magmatic Zone. About 30% of all recorded earthquakes with magnitudes above 2.9 have a T-phase. We divided the Gakkel Ridge's earthquakes into two groups by using spectral-time analysis. The first group: maximum energy of the earthquake is observed from 1.5 to 10 Hz, values of magnitudes Ml 2.50-5.29. Earthquakes are distributed along the Gakkel Ridge. The second group: maximum energy of the earthquake is observed from 1.5 to 20 Hz, clearly expressed a high-frequency component, values of magnitudes Ml 2.3-3.4. Earthquakes 2 groups focused only in the Sparsely Magmatic Zone. The new seismic data shows an unique information about geodynamic processes of the Gakkel Ridge.

High-Resolution Image of Europa's Ridged Plains

NASA Technical Reports Server (NTRS)

1998-01-01

This spectacular image taken by NASA's Galileo spacecraft camera shows a region of ridged plains on Jupiter's moon Europa. The plains are comprised of many parallel and cross-cutting ridges, commonly in pairs. The majority of the region is of very bright, but darker material is seen primarily in valleys between ridges. Some of the most prominent ridges have dark deposits along their margins and in their central valleys. Some of this dark material probably moved down the flanks of the ridges and has piled up along their bases. The most prominent ridges are about a kilometer in width (less than a mile). In the top right hand corner of the image the end of a dark wide ridge (about 2 kilometers or 1.2 miles across) is visible. Several deep fractures cut through this ridge and continue into the plains. The brightness of the region suggests that frost covers much of Europa's surface. This image looks different from those obtained earlier in Galileo's mission, because this image was taken with the Sun higher in Europa's sky.

This image was taken on December 16, 1997 at a range of 1,300 kilometers (800 miles) by Galileo's solid state imaging system. North is to the top of the picture, and the Sun illuminates the surface from the upper left. This image, centered at approximately 14 degrees south latitude and 194 degrees west longitude, covers an area approximately 20 kilometers (12 miles) on each side. The resolution is 26 meters (85 feet) per picture element.

The Jet Propulsion Laboratory, Pasadena, CA manages the Galileo mission for NASA's Office of Space Science, Washington, DC. JPL is an operating division of California Institute of Technology (Caltech).

This image and other images and data received from Galileo are posted on the World Wide Web, on the Galileo mission home page at URL http://www.jpl.nasa.gov/ galileo.

Effects of irrigation pumping on the ground-water system in Newton and Jasper Counties, Indiana

USGS Publications Warehouse

Bergeron, Marcel P.

1981-01-01

Flow in the ground-water system in Newton and Jasper Counties, Indiana, was simulated in a quasi-three-dimensional model in a study of irrigation use of ground water in the two counties. The ground-water system consists of three aquifers: (1) a surficial coarse sand aquifer known as the Kankakee aquifer, (2) a limestone and dolomite bedrock aquifer, and (3) a sand and gravel bedrock valley aquifer. Irrigation pumping, derived primarily from the bedrock, was estimated to be 34.8 million gallons per day during peak irrigation in 1977. Acreage irrigated with ground water is estimated to be 6,200 acres. A series of model experiments was used to estimate the effects of irrigation pumping on ground-water levels and streamflow. Model analysis indicates that a major factor controlling drawdown due to pumping in the bedrock aquifer are the variations in thickness and in vertical hydraulic conductivity in a semiconfining unit overlying the bedrock. Streamflow was not significantly reduced by hypothetical withdrawals of 12.6 million gallons per day from the bedrock aquifer and 10.3 million gallons per day in the Kankakee aquifer. Simulation of water-level recovery after irrigation pumping indicated that a 5-year period of alternating between increasing pumping and recovery will not cause serious problems of residual drawdown or ground-water mining. 

ENVIRONMENTAL BASELINE SURVEY REPORT FOR WEST BLACK OAK RIDGE, EAST BLACK OAK RIDGE, MCKINNEY RIDGE, WEST PINE RIDGE, AND PARCEL 21D IN THE VICINITY OF THE EAST TENNESSEE TECHNOLOGY PARK, OAK RIDGE, TENNESSEE

DOE Office of Scientific and Technical Information (OSTI.GOV)

David A. King

2012-11-29

This environmental baseline survey (EBS) report documents the baseline environmental conditions of five land parcels located near the U.S. Department of Energy’s (DOE’s) East Tennessee Technology Park (ETTP), including West Black Oak Ridge, East Black Oak Ridge, McKinney Ridge, West Pine Ridge, and Parcel 21d. The goal is to obtain all media no-further-investigation (NFI) determinations for the subject parcels considering existing soils. To augment the existing soils-only NFI determinations, samples of groundwater, surface water, soil, and sediment were collected to support all media NFI decisions. The only updates presented here are those that were made after the original issuance ofmore » the NFI documents. In the subject parcel where the soils NFI determination was not completed for approval (Parcel 21d), the full process has been performed to address the soils as well. Preparation of this report included the detailed search of federal government records, title documents, aerial photos that may reflect prior uses, and visual inspections of the property and adjacent properties. Interviews with current employees involved in, or familiar with, operations on the real property were also conducted to identify any areas on the property where hazardous substances and petroleum products, or their derivatives, and acutely hazardous wastes may have been released or disposed. In addition, a search was made of reasonably obtainable federal, state, and local government records of each adjacent facility where there has been a release of any hazardous substance or any petroleum product or their derivatives, including aviation fuel and motor oil, and which is likely to cause or contribute to a release of any hazardous substance or any petroleum product or its derivatives, including aviation fuel or motor oil, on the real property. A radiological survey and soil/sediment sampling was conducted to assess baseline conditions of Parcel 21d that were not addressed by the soils

Rhelogical constraints on ridge formation on Icy Satellites

NASA Astrophysics Data System (ADS)

Rudolph, M. L.; Manga, M.

2010-12-01

The processes responsible for forming ridges on Europa remain poorly understood. We use a continuum damage mechanics approach to model ridge formation. The main objectives of this contribution are to constrain (1) choice of rheological parameters and (2) maximum ridge size and rate of formation. The key rheological parameters to constrain appear in the evolution equation for a damage variable (D): ˙ {D} = B <<σ >>r}(1-D){-k-α D (p)/(μ ) and in the equation relating damage accumulation to volumetric changes, Jρ 0 = δ (1-D). Similar damage evolution laws have been applied to terrestrial glaciers and to the analysis of rock mechanics experiments. However, it is reasonable to expect that, like viscosity, the rheological constants B, α , and δ depend strongly on temperature, composition, and ice grain size. In order to determine whether the damage model is appropriate for Europa’s ridges, we must find values of the unknown damage parameters that reproduce ridge topography. We perform a suite of numerical experiments to identify the region of parameter space conducive to ridge production and show the sensitivity to changes in each unknown parameter.

Dynamical Instability Produces Transform Faults at Mid-Ocean Ridges

NASA Astrophysics Data System (ADS)

Gerya, Taras

2010-08-01

Transform faults at mid-ocean ridges—one of the most striking, yet enigmatic features of terrestrial plate tectonics—are considered to be the inherited product of preexisting fault structures. Ridge offsets along these faults therefore should remain constant with time. Here, numerical models suggest that transform faults are actively developing and result from dynamical instability of constructive plate boundaries, irrespective of previous structure. Boundary instability from asymmetric plate growth can spontaneously start in alternate directions along successive ridge sections; the resultant curved ridges become transform faults within a few million years. Fracture-related rheological weakening stabilizes ridge-parallel detachment faults. Offsets along the transform faults change continuously with time by asymmetric plate growth and discontinuously by ridge jumps.

The morphology of the ridge belts on Venus

NASA Astrophysics Data System (ADS)

Kriuchkov, V. P.

1990-06-01

The length and spacing of linear features were measured for ridge and groove belts, for the outer mountain zones of the Lakshmi planum, and for the outer ridge zones of coronal structures. The distributions of these parameters show small but significant differences in most of the cases. The ridges are assumed to result from deformations. Deformed-layer thickness were estimated for various types of linear subdivisions.

A deep structural ridge beneath central India

NASA Astrophysics Data System (ADS)

Agrawal, P. K.; Thakur, N. K.; Negi, J. G.

A joint-inversion of magnetic satellite (MAGSAT) and free air gravity data has been conducted to quantitatively investigate the cause for Bouguer gravity anomaly over Central Indian plateaus and possible fold consequences beside Himalayan zone in the Indian sub-continent due to collision between Indian and Eurasian plates. The appropriate inversion with 40 km crustal depth model has delineated after discriminating high density and magnetisation models, for the first time, about 1500 km long hidden ridge structure trending NW-SE. The structure is parallel to Himalayan fold axis and the Indian Ocean ridge in the Arabian Sea. A quantitative relief model across a representative anomaly profile confirms the ridge structure with its highest point nearly 6 km higher than the surrounding crustal level in peninsular India. The ridge structure finds visible support from the astro-geoidal contours.

27 CFR 9.158 - Mendocino Ridge.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Mendocino Ridge. 9.158 Section 9.158 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS AMERICAN VITICULTURAL AREAS Approved American Viticultural Areas § 9.158 Mendocino Ridge. (a) Name. The name of the...

27 CFR 9.158 - Mendocino Ridge.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Mendocino Ridge. 9.158 Section 9.158 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL AMERICAN VITICULTURAL AREAS Approved American Viticultural Areas § 9.158 Mendocino Ridge. (a) Name. The name of the...

27 CFR 9.158 - Mendocino Ridge.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Mendocino Ridge. 9.158 Section 9.158 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS AMERICAN VITICULTURAL AREAS Approved American Viticultural Areas § 9.158 Mendocino Ridge. (a) Name. The name of the...

27 CFR 9.158 - Mendocino Ridge.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Mendocino Ridge. 9.158 Section 9.158 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL AMERICAN VITICULTURAL AREAS Approved American Viticultural Areas § 9.158 Mendocino Ridge. (a) Name. The name of the...

27 CFR 9.158 - Mendocino Ridge.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Mendocino Ridge. 9.158 Section 9.158 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS AMERICAN VITICULTURAL AREAS Approved American Viticultural Areas § 9.158 Mendocino Ridge. (a) Name. The name of the...

Student Health Services at Orchard Ridge.

ERIC Educational Resources Information Center

Nichols, Don D.

This paper provides a synoptic review of student health services at the community college level while giving a more detailed description of the nature of health services at Orchard Ridge, a campus of Oakland Community College. The present College Health Service program provides for a part-time (24 hrs./wk.) nurse at Orchard Ridge. A variety of…

Alkalic Basalt in Ridge Axis of 53˚E Amagmatic Segment Center, Southwest Indian Ridge

NASA Astrophysics Data System (ADS)

Zhou, H.; Wang, J.; Liu, Y.; Ji, F.; Dick, H. J.

2014-12-01

Mid-ocean ridge basalt (MORB) is key tracer of composition and process in the mantle. It is interesting to notice that some alkalic basalts occur in amagmatic spreading center of ultraslow spreading ridges, for examples, 9-16˚E of the Southwest Indian ridge (Standish et al., 2008) and Lena Trough of Arctic Ocean (Snow et al., 2011). The latter is interpreted as the result of the pre-existence of continental transform fault or the especially cold thermal structure of ancient continental lithosphere. 53˚E segment, east of the Gallieni transform fault, was discovered as an amagmatic segment (Zhou and Dick, 2013). On both sides of the ridge axis, peridotites with a little gabbro are exposed in an area more than 3200 km2. Basalts exist in the southern portion of 53˚E segment, indicating the transformation from magmatic to amagmatic spreading about 9.4 million years ago. In April of 2014, Leg 4 of the RV Dayang Yihao cruise 30, basaltic glasses was dredged at one location (3500 m water depth) in the ridge axis of 53˚E segment center. It is shown by electric probe analysis that the samples have extremely high sodium content (4.0-4.49 wt% Na­2O ), relative higher potassium content (0.27-0.32 wt% K2O) and silica (50.67-51.87 wt% SiO2), and lower MgO content (5.9-6.4 wt% MgO). Mg-number is 0.55-0.59. It is distinctly different from the N-MORB (2.42-2.68 wt% Na2O, 0.03-0.06 wt% K2O, 48.6-49.6 wt% Si2O, 8.8-9.0 wt% MgO, Mg-numbers 0.63) distributed in the 560-km-long supersegment, west of the Gallieni transform fault, where the active Dragon Flag hydrothermal field was discovered at 49.6˚E in 2007. The reasons for the alkalic basalt in the ridge axis of 53˚E amagmatic segment center, either by low melting degree of garnet stability field, by melting from an ancient subcontinental lithospheric mantle, or by sodium-metasomatism or even other mantle processes or their combination in the deep mantle, are under further studies.

Femtosecond laser patterning of biological materials

NASA Astrophysics Data System (ADS)

Grigoropoulos, Costas P.; Jeon, Hojeong; Hidai, Hirofumi; Hwang, David J.

2011-03-01

This paper aims at presenting a review of work at the Laser Thermal Laboratory on the microscopic laser modification of biological materials using ultrafast laser pulses. We have devised a new method for fabricating high aspect ratio patterns of varying height by using two-photon polymerization process in order to study contact guidance and directed growth of biological cells. Studies using NIH-3T3 and MDCK cells indicate that cell morphology on fiber scaffolds is influenced by the pattern of actin microfilament bundles. Cells experienced different strength of contact guidance depending on the ridge height. Cell morphology and motility was investigated on micronscale anisotropic cross patterns and parallel line patterns having different aspect ratios. A significant effect on cell alignment and directionality of migration was observed. Cell morphology and motility were influenced by the aspect ratio of the cross pattern, the grid size, and the ridge height. Cell contractility was examined microscopically in order to measure contractile forces generated by individual cells on self-standing fiber scaffolds.

Ridge Waveguide Structures in Magnesium-Doped Lithium Niobate

NASA Technical Reports Server (NTRS)

Himmer, Phillip; Battle, Philip; Suckow, William; Switzer, Greg

2011-01-01

This work proposes to establish the feasibility of fabricating isolated ridge waveguides in 5% MgO:LN. Ridge waveguides in MgO:LN will significantly improve power handling and conversion efficiency, increase photonic component integration, and be well suited to spacebased applications. The key innovation in this effort is to combine recently available large, high-photorefractive-damage-threshold, z-cut 5% MgO:LN with novel ridge fabrication techniques to achieve high-optical power, low-cost, high-volume manufacturing of frequency conversion structures. The proposed ridge waveguide structure should maintain the characteristics of the periodically poled bulk substrate, allowing for the efficient frequency conversion typical of waveguides and the high optical damage threshold and long lifetimes typical of the 5% doped bulk substrate. The low cost and large area of 5% MgO:LN wafers, and the improved performance of the proposed ridge waveguide structure, will enhance existing measurement capabilities as well as reduce the resources required to achieve high-performance specifications. The purpose of the ridge waveguides in MgO:LN is to provide platform technology that will improve optical power handling and conversion efficiency compared to existing waveguide technology. The proposed ridge waveguide is produced using standard microfabrication techniques. The approach is enabled by recent advances in inductively coupled plasma etchers and chemical mechanical planarization techniques. In conjunction with wafer bonding, this fabrication methodology can be used to create arbitrarily shaped waveguides allowing complex optical circuits to be engineered in nonlinear optical materials such as magnesium doped lithium niobate. Researchers here have identified NLO (nonlinear optical) ridge waveguide structures as having suitable value to be the leading frequency conversion structures. Its value is based on having the low-cost fabrication necessary to satisfy the challenging pricing

Ridge-crossing mantle plumes and gaps in tracks

NASA Astrophysics Data System (ADS)

Sleep, Norman H.

2002-12-01

Hot spot tracks approach, cross, and leave ridge axes. The complications of this process make it difficult to determine the track followed by a plume and the evolution of its vigor. When a plume is sufficiently near the ridge axis, buoyant plume material flows along the base of the lithosphere toward the axis, forming an on-axis hot spot. The track of the on-axis hot spot is a symmetric V on both plates and an unreliable indication of the path followed by the plume. Aseismic ridges form more or less along flowlines from a plume to a ridge axis when channels form at the base of the lithosphere. A dynamic effect is that off-axis hot spots appear to shut off at the time that an on-axis hot spot becomes active along an axis-approaching track. This produces a gap in the obvious track and a jump of the hot spot to the ridge axis. The gap results from the effects of ponded plume material on intraplate (membrane) stress. Membrane tension lets dikes ascend efficiently to produce obvious tracks of edifices. An off-axis hot spot shuts down when the plume is sufficiently near the ridge axis that plume material flows there, putting the nearby lithosphere above the plume into compression, preventing dikes. In addition, the off-axis thickness of plume material, which produces membrane tension, decreases as the slope of the base of the lithosphere increases beneath young lithosphere. Slow spreading rates favor gaps produced in this way. Gaps are observed near both fast and slow ridges.

Determinants of alveolar ridge preservation differ by anatomic location

PubMed Central

Leblebicioglu, Binnaz; Salas, Mabel; Ort, Yirae; Johnson, Ashley; Yildiz, Vedat O.; Kim, Do-Gyoon; Agarwal, Sudha; Tatakis, Dimitris N.

2016-01-01

Aim To investigate and compare outcomes following alveolar ridge preservation (ARP) in posterior maxilla and mandible. Methods Twenty-four patients (54 ± 3 years) with single posterior tooth extraction were included. ARP was performed with freeze-dried bone allograft and collagen membrane. Clinical parameters were recorded at extraction and re-entry. Harvested bone cores were analysed by microcomputed tomography (micro-CT), histomorphometry and immunohistochemistry. Results In both jaws, ARP prevented ridge height loss, but ridge width was significantly reduced by approximately 2.5 mm. Healing time, initial clinical attachment loss and amount of keratinized tissue at extraction site were identified as determinants of ridge height outcome. Buccal plate thickness and tooth root length were identified as determinants of ridge width outcome. In addition, initial ridge width was positively correlated with ridge width loss. Micro-CT revealed greater mineralization per unit volume in new bone compared with existing bone in mandible (p < 0.001). Distributions of residual graft, new cellular bone and immature tissue were similar in both jaws. Conclusion Within the limitations of this study, the results indicate that in different anatomic locations different factors may determine ARP outcomes. Further studies are needed to better understand determinants of ARP outcomes. PMID:23432761

Alternative Fuels Data Center: Blue Ridge Parkway Incorporates Alternative

Science.gov Websites

Fuels in Its Fleet Blue Ridge Parkway Incorporates Alternative Fuels in Its Fleet to someone by E-mail Share Alternative Fuels Data Center: Blue Ridge Parkway Incorporates Alternative Fuels in Its Fleet on Facebook Tweet about Alternative Fuels Data Center: Blue Ridge Parkway Incorporates Alternative

Curiosity at Gale Crater's Hematite Ridge: High Mn and P Near the Ridge Show Chemical Evidence for Generation by an Oxidation Front

NASA Astrophysics Data System (ADS)

Wiens, R. C.; Meslin, P. Y.; Lanza, N.; Frydenvang, J.; Mangold, N.; Johnson, J. R.; Fraeman, A. A.; Horgan, B.; Bedford, C.; Blaney, D. L.; Bridges, J.; Cousin, A.; Ehlmann, B. L.; Forni, O.; Gasda, P. J.; Gasnault, O.; Gellert, R.; Johnstone, S.; Lamm, S. N.; Lasue, J.; Le Mouelic, S.; Maurice, S.; Newsom, H. E.; Ollila, A.; Payre, V.; Rapin, W.; Salvatore, M. R.; Schwenzer, S. P.; Thomas, N. H.; Vasavada, A. R.

2017-12-01

After traversing >17 km, the Curiosity rover has reached Vera Rubin Ridge (VRR), formerly known as the Hematite Ridge. Situated 200 m above the base of Gale crater on the slope of Mt. Sharp, VRR was one of the original objectives of the mission. VRR stretches 6.5 km NE-SW with a vertical height of 30 m (to -4200 m), it is the largest surface feature encountered by Curiosity to date. Orbital observation by CRISM of relatively strong hematite signal along the ridge gave it its original name. Some hematite spectral signatures along the ridge have been observed by Curiosity from long distance by Mastcam and ChemCam passive spectra. Curiosity started observing local enrichments of hematite in Murray lacustrine sediments near Bagnold Dunes, which may or may not be related to the hematite observed on the ridge top. The presence of hematite-like spectral signatures became variable as the rover approached below the ridge. Chemistry and ridge imaging: Magnesium, Mn, and P have shown strong increases in dark surface features in some regions below the ridge. Manganese oxide abundances have risen to >10 wt. % in some dark nodules and laminae. Iron, Mg, and P appear correlated in high-P observations, with the highest values associated with vein-related inclusions. Another class of dark features shows high Fe without high Mn or P. ChemCam high-resolution imaging from within 100 m of the base of the ridge shows regions of both finely laminated parallel strata and low-angle cross stratification along with vertical fractures surrounded by alteration halos; these are comparable to Murray stratigraphy. Given that the exposed surface of the Murray formation is the result of significant erosional deflation, the ridge must be more erosionally resistant than the surrounding material. The observation of high-oxidation-potential element enrichments below VRR argues for an oxidation front in which the local sediments were enriched in oxidized iron (hematite) and manganese. In this

Asymmetric sea-floor spreading caused by ridge-plume interactions

NASA Astrophysics Data System (ADS)

Müller, R. Dietmar; Roest, Walter R.; Royer, Jean-Yves

1998-12-01

Crustal accretion at mid-ocean ridges is generally modelled as a symmetric process. Regional analyses, however, often show either small-scale asymmetries, which vary rapidly between individual spreading corridors, or large-scale asymmetries represented by consistent excess accretion on one of the two separating plates over geological time spans. In neither case is the origin of the asymmetry well understood. Here we present a comprehensive analysis of the asymmetry of crustal accretion over the past 83Myr based on a set of self-consistent digital isochrons and models of absolute plate motion,. We find that deficits in crustal accretion occur mainly on ridge flanks overlying one or several hotspots. We therefore propose that asymmetric accretion is caused by ridge propagation towards mantle plumes or minor ridge jumps sustained by asthenospheric flow, between ridges and plumes. Quantifying the asymmetry of crustal accretion provides a complementary approach to that based on geochemical and other geophysical data, in helping to unravel how mantle plumes and mid-ocean ridges are linked through mantle convection processes.

Topography and tectonics of mid-oceanic ridge axes

NASA Technical Reports Server (NTRS)

Sleep, N. H.; Rosendahl, B. R.

1979-01-01

Numerical fluid dynamic models of mid-oceanic ridge axes were constructed using distributions of material properties constrained by seismic studies and thermal calculations. The calculations indicate that spreading is passive except for forces caused by density differences due to thermal expansion and partial melt. Except for geometric differences due to temperature distribution, one set of mechanical properties can adequately explain central rifts of slow ridges and central peaks of fast ridges. Viscous head loss in the upwelling material dominates at low spreading rates where material ascends through a narrow conduit. Thermal expansion and partial melting dominate at high spreading rates where a wide low viscosity crustal magma chamber is present. The preferred rheology is 10 to the 20th poise for the upwelling lithosphere; less than 5 x 10 to the 17th for the crustal magma chamber and axial intrusion zone at fast ridges, and a yield stress of 200 bars for the lithosphere. The calculation correctly predicts the existence of central peaks at 'hot-spot' ridges, where seismic evidence indicates a large magma chamber.

1. GENERAL VIEW OF ENTRANCE TO BLUE RIDGE TUNNEL (LEFT) ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. GENERAL VIEW OF ENTRANCE TO BLUE RIDGE TUNNEL (LEFT) FROM SOUTHEAST. ORIGINAL BLUE RIDGE R.R. (CROZET) TUNNEL IS VISIBLE AT RIGHT. - Chesapeake & Ohio Railroad, Blue Ridge Tunnel, Highway 250 at Rockfish Gap, Afton, Nelson County, VA

The Axial Age and the Problems of the Twentieth Century: Du Bois, Jaspers, and Universal History.

PubMed

Boy, John D

The axial age debate has put big questions of social and cultural change back on the agenda of sociology. This paper takes this development as an occasion to reflect on how social thought works with (and against) nineteenth-century intellectual traditions in its efforts to understand history on a macro scale. Karl Jaspers, who initially formulated the axial age thesis in The Origin and Goal of History , revised the Hegelian account of world history by broadening the scope of the narrative to encompass all civilizations participating in the events of the first millennium BCE that saw the rise of major philosophical and religious traditions. However, his account, like the earlier philosophical accounts he seeks to improve upon, privileges cognitive developments over material practices and social interactions, and as such offers little to those seeking to make sense of how cultural patterns interact with others and spread. Here another social theorist engaging with Hegel, W. E. B. Du Bois, provides a helpful contrast. His account of the development of double-consciousness in "Of Our Spiritual Strivings," the opening chapter of The Souls of Black Folk , helps us to understand experiences of encounter and the perduring historical effects they may have. Du Bois' relational theory reminds us of the importance of unpacking abstractions and understanding processes in terms of social interactions.

Fuzzy and process modelling of contour ridge water dynamics

NASA Astrophysics Data System (ADS)

Mhizha, Alexander; Ndiritu, John

2018-05-01

Contour ridges are an in-situ rainwater harvesting technology developed initially for soil erosion control but are currently also widely promoted for rainwater harvesting. The effectiveness of contour ridges depends on geophysical, hydro-climatic and socio economic factors that are highly varied in time and space. Furthermore, field-scale data on these factors are often unavailable. This together with the complexity of hydrological processes at field scale limits the application of classical distributed process modelling to highly-instrumented experimental fields. This paper presents a framework that combines fuzzy logic and process-based approach for modelling contour ridges for rainwater harvesting where detailed field data are not available. Water balance for a representative contour-ridged field incorporating the water flow processes across the boundaries is integrated with fuzzy logic to incorporate the uncertainties in estimating runoff. The model is tested using data collected during the 2009/2010 and 2010/2011 rainfall seasons from two contour-ridged fields in Zhulube located in the semi-arid parts of Zimbabwe. The model is found to replicate soil moisture in the root zone reasonably well (NSE = 0.55 to 0.66 and PBIAS = -1.3 to 6.1 %). The results show that combining fuzzy logic and process based approaches can adequately model soil moisture in a contour ridged-field and could help to assess the water dynamics in contour ridged fields.

Multiple expressions of plume-ridge interaction in the Galápagos: Volcanic lineaments and ridge jumps

NASA Astrophysics Data System (ADS)

Mittelstaedt, E.; Soule, S.; Harpp, K.; Fornari, D.; McKee, C.; Tivey, M.; Geist, D.; Kurz, M. D.; Sinton, C.; Mello, C.

2012-05-01

Anomalous volcanism and tectonics between near-ridge mantle plumes and mid-ocean ridges provide important insights into the mechanics of plume-lithosphere interaction. We present new observations and analysis of multibeam, side scan sonar, sub-bottom chirp, and total magnetic field data collected during the R/V Melville FLAMINGO cruise (MV1007; May-June, 2010) to the Northern Galápagos Volcanic Province (NGVP), the region between the Galápagos Archipelago and the Galápagos Spreading Center (GSC) on the Nazca Plate, and to the region east of the Galápagos Transform Fault (GTF) on the Cocos Plate. The NGVP exhibits pervasive off-axis volcanism related to the nearby Galápagos hot spot, which has dominated the tectonic evolution of the region. Observations indicate that ˜94% of the excess volcanism in our survey area occurs on the Nazca Plate in three volcanic lineaments. Identified faults in the NGVP are consistent with normal ridge spreading except for those within a ˜60 km wide swath of transform-oblique faults centered on the GTF. These transform-oblique faults are sub-parallel to the elongation direction of larger lineament volcanoes, suggesting that lineament formation is influenced by the lithospheric stress field. We evaluate current models for lineament formation using existing and new observations as well as numerical models of mantle upwelling and melting. The data support a model where the lithospheric stress field controls the location of volcanism along the lineaments while several processes likely supply melt to these eruptions. Synthetic magnetic models and an inversion for crustal magnetization are used to determine the tectonic history of the study area. Results are consistent with creation of the GTF by two southward ridge jumps, part of a series of jumps that have maintained a plume-ridge separation distance of 145 km to 215 km since ˜5 Ma.

Modeling an exogenic origin for the equatorial ridge on Iapetus

NASA Astrophysics Data System (ADS)

Stickle, Angela M.; Roberts, James H.

2018-06-01

Iapetus has a ridge along the equator that extends continuously for more than 110° in longitude. Parts of the ridge rise as much as 20 km above the surrounding terrains. Most models for the formation of this enigmatic ridge are endogenic, generally requiring the formation of a fast-spinning Iapetus with an oblate shape due to the rotation speed. Many of these require specific scenarios and have constraining parameters in order to generate a ridge comparable to what is seen today. An exogenic formation mechanism has also been proposed, that the ridge represents the remains of an early ring system around Iapetus that collapsed onto the surface. Thus far, none of the models have conclusively identified the origin of the ridge. In this study, an exogenic origin for the ridge is assumed, which is derived from a collapsing disk of debris around Iapetus, without invoking any specific model for the generation of the debris disk. Here, we evaluate whether it is possible to generate a ridge of the size and shape as observed by simulating the impact of the collapsing debris using the CTH hydrocode. Pi-scaling calculations suggest that extremely oblique impact angles (1°-10°) are needed to add to ridge topography. These extreme impact angles severely reduce the cratering efficiency compared to a vertical impact, adding material rather than eroding it during crater formation. Furthermore, material is likely to be excavated at low angles, enhancing downrange accumulation. Multiple impacts from debris pieces will heighten this effect. Because infalling debris is predicted to impact at extremely low angles, both of these effects might have contributed to ridge formation on Iapetus. The extreme grazing angles of the impacts modeled here decouple much of the projectile energy from the target, and impact heating of the surface is not significant. These models suggest that a collapsing disk of debris should have been able to build topography to create a ridge around Iapetus.

Structure of the Malpelo Ridge (Colombia) from seismic and gravity modelling

NASA Astrophysics Data System (ADS)

Marcaillou, Boris; Charvis, Philippe; Collot, Jean-Yves

2006-12-01

Wide-angle and multichannel seismic data collected on the Malpelo Ridge provide an image of the deep structure of the ridge and new insights on its emplacement and tectonic history. The crustal structure of the Malpelo Ridge shows a 14 km thick asymmetric crustal root with a smooth transition to the oceanic basin southeastward, whereas the transition is abrupt beneath its northwestern flank. Crustal thickening is mainly related to the thickening of the lower crust, which exhibits velocities from 6.5 to 7.4 km/s. The deep structure is consistent with emplacement at an active spreading axis under a hotspot like the present-day Galapagos Hotspot on the Cocos-Nazca Spreading Centre. Our results favour the hypothesis that the Malpelo Ridge was formerly a continuation of the Cocos Ridge, emplaced simultaneously with the Carnegie Ridge at the Cocos-Nazca Spreading Centre, from which it was separated and subsequently drifted southward relative to the Cocos Ridge due to differential motion along the dextral strike-slip Panama Fracture Zone. The steep faulted northern flank of the Malpelo Ridge and the counterpart steep and faulted southern flank of Regina Ridge are possibly related to a rifting phase that resulted in the Coiba Microplate’s separation from the Nazca Plate along the Sandra Rift.

Melt distribution along the axis of ultraslow spreading mid-ocean ridges

NASA Astrophysics Data System (ADS)

Schlindwein, V. S. N.; Schmid, F.; Meier, M.

2017-12-01

Ultraslow spreading mid-ocean ridges (<15 mm/y full spreading rate) differ from faster spreading ridges by their uneven melt distribution. Crustal thickness varies along axis from zero to more than 8 km at volcanic centers. These volcanic centers receive more melt than the regional average and may be sustained for millions of years. The segmentation pattern and active volcanism at ultraslow spreading ridges greatly differs from faster spreading ridges. Using networks of ocean bottom seismometers at three differing ridge segments, we could show that the maximum depth of brittle faulting, equivalent approximately to temperatures of 600-700°C, varies drastically along axis. Ridge sections that lack an igneous crust exhibit a thick lithosphere as evidenced by the deepest mid-ocean ridge earthquakes observed so far at more than 30 km depth. Beneath areas of basalt exposure, in particular beneath pronounced volcanic centers, the axial lithosphere may be more than 15 km thinner allowing for melt flow at the base of the lithosphere towards the volcanoes, a process that has been postulated to explain the uneven along-axis melt distribution. Spreading events at ultraslow spreading ridges are unusual as we found from two spreading episodes at 85°E Gakkel Ridge and Segment 8 volcano on the Southwest Indian Ridge. These eruptions were preceded or accompanied by large (M>5) and long-lasting earthquake swarms and active magmatism lasted over 3-16 years. A massive hydrothermal event plume and sounds from deep submarine explosive volcanism were observed at Gakkel Ridge. At the Segment 8 volcano, we imaged a melt reservoir extending to about 8 km depth below the volcano that potentially fed a sill intrusion recorded by an ocean bottom seismometers about 30 km away at a neighboring subordinate volcanic center. To better understand the segmentation and melt transport at ultraslow spreading rigdes, we recently conducted a segment-scale seismicity survey of Knipovich Ridge in the

Custom Titanium Ridge Augmentation Matrix (CTRAM): A Case Report.

PubMed

Connors, Christopher A; Liacouras, Peter C; Grant, Gerald T

2016-01-01

This is a case report of a custom titanium ridge augmentation matrix (CTRAM). Using cone beam computed tomography (CBCT), a custom titanium space-maintaining device was developed. Alveolar ridges were virtually augmented, a matrix was virtually designed, and the CTRAM was additively manufactured with titanium (Ti6Al4V). Two cases are presented that resulted in sufficient increased horizontal bone volume with successful dental implant placement. The CTRAM design allows for preoperative planning for increasing alveolar ridge dimensions to support dental implants, reduces surgical time, and prevents the need for a second surgical site to gain sufficient alveolar ridge bone volume for dental implant therapy.

Normalization Ridge Regression in Practice I: Comparisons Between Ordinary Least Squares, Ridge Regression and Normalization Ridge Regression.

ERIC Educational Resources Information Center

Bulcock, J. W.

The problem of model estimation when the data are collinear was examined. Though the ridge regression (RR) outperforms ordinary least squares (OLS) regression in the presence of acute multicollinearity, it is not a problem free technique for reducing the variance of the estimates. It is a stochastic procedure when it should be nonstochastic and it…

Hydrodynamic role of longitudinal ridges in a leatherback turtle swimming

NASA Astrophysics Data System (ADS)

Bang, Kyeongtae; Kim, Jooha; Lee, Sang-Im; Choi, Haecheon

2015-11-01

The leatherback sea turtle (Dermochelys coriacea), the fastest swimmer and the deepest diver among marine turtles, has five longitudinal ridges on its carapace. These ridges are the most remarkable morphological features distinguished from other marine turtles. To investigate the hydrodynamic role of these ridges in the leatherback turtle swimming, we model a carapace with and without ridges by using three dimensional surface data of a stuffed leatherback turtle in the National Science Museum, Korea. The experiment is conducted in a wind tunnel in the ranges of the real leatherback turtle's Reynolds number (Re) and angle of attack (α). The longitudinal ridges function differently according to the flow condition (i.e. Re and α). At low Re and negative α that represent the swimming condition of hatchlings and juveniles, the ridges significantly decrease the drag by generating streamwise vortices and delaying the main separation. On the other hand, at high Re and positive α that represent the swimming condition of adults, the ridges suppress the laminar separation bubble near the front part by generating streamwise vortices and enhance the lift and lift-to-drag ratio. Supported by the NRF program (2011-0028032).

76 FR 35909 - Temporary Concession Contract for Blue Ridge Parkway

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-20

... Concession Contract for Blue Ridge Parkway AGENCY: National Park Service, Interior. ACTION: Notice of proposed award of temporary concession contracts for Blue Ridge Parkway, NC/VA. SUMMARY: Pursuant to 36 CFR... concession contracts for the conduct of certain visitor services within the Blue Ridge Parkway, North...

Microbial Life in Ridge Flank Crustal Fluids at Baby Bare Seamount, Juan de Fuca Ridge

NASA Astrophysics Data System (ADS)

Huber, J. A.; Johnson, H. P.; Butterfield, D. A.; Baross, J. A.

2005-12-01

To determine the microbial community diversity within old oceanic crust, a novel sampling strategy was used to collect crustal fluids at Baby Bare Seamount, a 3.5 Ma old outcrop located in the northeast Pacific Ocean on the eastern flank of the Juan de Fuca Ridge. Stainless steel probes were driven directly into the igneous ocean crust to obtain samples of ridge flank crustal fluids. Genetic signatures and enrichment cultures of microorganisms demonstrate that these crustal fluids host a microbial community composed of species indigenous to the subseafloor, including anaerobic thermophiles, and species from other deep-sea habitats, such as seawater and sediments. Evidence using molecular techniques indicates the presence of a relatively small but active microbial population, dominated by bacteria. The microbial community diversity found in the crustal fluids may indicate habitat variability in old oceanic crust, with inputs of nutrients from seawater, sediment pore-water fluids and possibly hydrothermal sources. This report further supports the presence of an indigenous microbial community in ridge flank crustal fluids and advances our understanding of the potential physiological and phylogenetic diversity of this community.

Wrinkle Ridges and Pit Craters

NASA Image and Video Library

2016-10-19

Tectonic stresses highly modified this area of Ganges Catena, north of Valles Marineris. The long, skinny ridges (called "wrinkle ridges") are evidence of compressional stresses in Mars' crust that created a crack (fault) where one side was pushed on top of the other side, also known as a thrust fault. As shown by cross-cutting relationships, however, extensional stresses have more recently pulled the crust of Mars apart in this region. (HiRISE imaged this area in 2-by-2 binning mode, so a pixel represents a 50 x 50 square centimeter.) http://photojournal.jpl.nasa.gov/catalog/PIA21112

Mantle Convection beneath the Aegir Ridge, a Shadow in the Iceland Hotspot

NASA Astrophysics Data System (ADS)

Howell, S. M.; Ito, G.; Breivik, A. J.; Hanan, B. B.; Mjelde, R.; Sayit, K.; Vogt, P. R.

2012-12-01

The Iceland Hotspot has produced extensive volcanism spanning much of the ocean basin between Greenland and Norway, forming one of the world's largest igneous provinces. However, an apparent igneous "shadow" in hotspot activity is located at the fossil Aegir Ridge, which formed anomalously thin crust, despite this ridge being near the Iceland hotspot when it was active. The Aegir Ridge accommodated seafloor spreading northeast of present-day Iceland from the time of continental breakup at ~55 Ma until ~25 Ma, at which point spreading shifted west to the Kolbeinsey Ridge. To address the cause of the anomalously thin crust produced by the Aegir Ridge, we use three-dimensional numerical models to simulate the interaction between a mantle plume beneath the Iceland hotspot, rifting continental lithosphere, and the time-evolving North Atlantic ridge system. Two end-member hypotheses were investigated: (1) Material emanating from the Iceland mantle plume was blocked from reaching the Aegir Ridge by the thick lithosphere of the Jan Mayen Microcontinent as the Kolbeinsey Ridge began rifting it from Greenland at ~30 Ma, just east of the plume center; (2) Plume material was not blocked and did reach the Aegir Ridge, but had already experienced partial melting closer to the hotspot. This material was then unable to produce melt volumes at the Aegir Ridge comparable to those of pristine mantle. To test these hypotheses, we vary the volume flux and viscosity of the plume, and identify which conditions do and do not lead to the Aegir Ridge forming anomalously thin crust. Results show that the combination of plume material being drawn into the lithospheric channels beneath the Reykjanes Ridge and Kolbeinsey Ridge after their respective openings, and the impedance of plume flow by the Jan Mayen Microcontinent (hypothesis 1), can deprive the Aegir Ridge of plume influence. This leads to low crustal thicknesses that are comparable to those observed. We have yet to produce a model

Cedar Ridge Camp: Using the Local Environment

ERIC Educational Resources Information Center

Burke, Grayson

2007-01-01

In 2007 Cedar Ridge Camp opened for its first season as a traditional co-ed summer camp and year-round outdoor education and recreation centre. The mission would centre on creating a program that would encourage personal development and growth through a shared outdoor experience. Cedar Ridge's main goals were to promote the formation of close…

Tectonics of ridge-transform intersections at the Kane fracture zone

NASA Astrophysics Data System (ADS)

Karson, J. A.; Dick, H. J. B.

1983-03-01

The Kane Transform offsets spreading-center segments of the Mid-Atlantic Ridge by about 150 km at 24° N latitude. In terms of its first-order morphological, geological, and geophysical characteristics it appears to be typical of long-offset (>100 km), slow-slipping (2 cm yr-1) ridge-ridge transform faults. High-resolution geological observations were made from deep-towed ANGUS photographs and the manned submersible ALVIN at the ridge-transform intersections and indicate similar relationships in these two regions. These data indicate that over a distance of about 20 km as the spreading axes approach the fracture zone, the two flanks of each ridge axis behave in very different ways. Along the flanks that intersect the active transform zone the rift valley floor deepens and the surface expression of volcanism becomes increasingly narrow and eventually absent at the intersection where only a sediment-covered ‘nodal basin’ exists. The adjacent median valley walls have structural trends that are oblique to both the ridge and the transform and have as much as 4 km of relief. These are tectonically active regions that have only a thin (<200 m), highly fractured, and discontinuous carapace of volcanic rocks overlying a variably deformed and metamorphosed assemblage of gabbroic rocks. Overprinting relationships reveal a complex history of crustal extension and rapid vertical uplift. In contrast, the opposing flanks of the ridge axes, that intersect the non-transform zones appear to be similar in many respects to those examined elsewhere along slow-spreading ridges. In general, a near-axial horst and graben terrain floored by relatively young volcanics passes laterally into median valley walls with a simple block-faulted character where only volcanic rocks have been found. Along strike toward the fracture zone, the youngest volcanics form linear constructional volcanic ridges that transect the entire width of the fracture zone valley. These volcanics are continuous with

Calendar year 1996 annual groundwater monitoring report for the Chestnut Ridge Hydrogeologic Regime at the U.S. Department of Energy Y-12 Plant, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-02-01

This annual monitoring report contains groundwater and surface water monitoring data obtained in the Chestnut Ridge Hydrogeologic Regime (Chestnut Ridge Regime) during calendar year (CY) 1996. The Chestnut Ridge Regime encompasses a section of Chestnut Ridge west of Scarboro Road and east of an unnamed drainage feature southwest of the US Department of Energy (DOE) Oak Ridge Y-12 Plant (unless otherwise noted, directions are in reference to the Y-12 Plant administrative grid). The Chestnut Ridge Regime contains several sites used for management of hazardous and nonhazardous wastes associated with plant operations. Groundwater and surface water quality monitoring associated with thesemore » waste management sites is performed under the auspices of the Y-12 Plant Groundwater Protection Program (GWPP). Included in this annual monitoring report are the groundwater monitoring data obtained in compliance with the Resource Conservation and Recovery Act (RCRA) Post-Closure Permit for the Chestnut Ridge Regime (post-closure permit) issued by the Tennessee Department of Environment and Conservation (TDEC) in June 1996. Besides the signed certification statement and the RCRA facility information summarized below, condition II.C.6 of the post-closure permit requires annual reporting of groundwater monitoring activities, inclusive of the analytical data and results of applicable data evaluations, performed at three RCRA hazardous waste treatment, storage, or disposal (TSD) units: the Chestnut Ridge Sediment Disposal Basin (Sediment Disposal Basin), the Chestnut Ridge Security Pits (Security Pits), and Kerr Hollow Quarry.« less

Coupled ridge waveguide distributed feedback quantum cascade laser arrays

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Ying-Hui; Zhang, Jin-Chuan, E-mail: zhangjinchuan@semi.ac.cn; Yan, Fang-Liang

2015-04-06

A coupled ridge waveguide quantum cascade laser (QCL) array consisting of fifteen elements with parallel integration was presented. In-phase fundamental mode operation in each element is secured by both the index-guided nature of the ridge and delicate loss management by properly designed geometries of the ridges and interspaces. Single-lobe lateral far-field with a nearly diffraction limited beam pattern was obtained. By incorporating a one-dimensional buried distributed feedback grating, the in-phase-operating coupled ridge waveguide QCL design provides an efficient solution to obtaining high output power and stable single longitudinal mode emission. The simplicity of this structure and fabrication process makes thismore » approach attractive to many practical applications.« less

Wrinkle ridges, stress domains, and kinematics of venusian plains

NASA Technical Reports Server (NTRS)

Mcgill, George E.

1993-01-01

Wrinkle ridges are nearly ubiquitous landforms on the plains of Venus. By analogy with similar structures on other planets, venusian wrinkle ridges are inferred to trend normal to the direction of maximum principal compression in the crust, an inference that is verified by geometrical relationships with positive and negative relief features on Venus. Because plains are the dominant terrain on Venus, wrinkle ridges provide an excellent opportunity to determine the orientations of shallow crustal principal stress trajectories over most of the planet. In most places there are two or more sets of wrinkle ridges, and commonly one of these persists over a large area, defining a regional stress domain. Intersection relationships indicate that these domains differ in age.

Europan double ridge morphometry as a test of formation models

NASA Astrophysics Data System (ADS)

Dameron, Ashley C.; Burr, Devon M.

2018-05-01

Double ridges on the Jovian satellite Europa consist of two parallel ridges with a central trough. Although these features are nearly ubiquitous on Europa, their formation mechanism(s) is (are) not yet well-understood. Previous hypotheses for their formation can be divided into two groups based on 1) the expected interior slope angles and 2) the magnitude of interior/exterior slope symmetry. The published hypotheses in the first ("fracture") group entail brittle deformation of the crust, either by diapirism, shear heating, or buckling due to compression. Because these mechanisms imply uplift of near-vertical fractures, their predicted interior slopes are steeper than the angle of repose (AOR) with shallower exterior slopes. The second ("flow") group includes cryosedimentary and cryovolcanic processes - explosive or effusive cryovolcanism and tidal squeezing -, which are predicted to form ridge slopes at or below the AOR. Explosive cryovolcanism would form self-symmetric ridges, whereas effusive cryolavas and cryo-sediments deposited during tidal squeezing would likely not exhibit slope symmetry. To distinguish between these two groups of hypothesized formation mechanisms, we derived measurements of interior slope angle and interior/exterior slope symmetry at multiple locations on Europa through analysis of data from the Galileo Solid State Imaging (SSI) camera. Two types of data were used: i) elevation data from five stereo-pair digital elevation models (DEMs) covering four ridges (580 individual measurements), and ii) ridge shadow length measurements taken on individual images over 40 ridges (200 individual measurements). Our results shows that slopes measured on our DEMs, located in the Cilix and Banded Plains regions, typically fall below the AOR, and slope symmetry is dominant. Two different shadow measurement techniques implemented to calculate interior slopes yielded slope angles that also fall below the AOR. The shallow interior slopes derived from both

Very High Resolution Bathymetric Mapping at the Ridge 2000 Integrated Study Sites: Acquisition and Processing Protocols Developed During Recent Alvin Field Programs to the East Pacific Rise and Juan de Fuca Ridge

NASA Astrophysics Data System (ADS)

Ferrini, V.; Fornari, D. J.; Shank, T.; Tivey, M.; Kelley, D. S.; Glickson, D.; Carbotte, S. M.; Howland, J.; Whitcomb, L. L.; Yoerger, D.

2004-12-01

Recent field programs at the East Pacific Rise and Juan de Fuca Ridge have resulted in the refinement of data processing protocols that enable the rapid creation of high-resolution (meter-scale) bathymetric maps from pencil-beam altimetric sonar data that are routinely collected during DSV Alvin dives. With the development of the appropriate processing tools, the Imagenex sonar, a permanent sensor on Alvin, can be used by a broad range of scientists permitting the analysis of various data sets within the context of high-quality bathymetric maps. The data processing protocol integrates depth data recorded with Alvin's Paroscientific pressure sensor with bathymetric soundings collected with an Imagenex 675 kHz articulating (scanning) sonar system, and high-resolution navigational data acquired with DVLNAV, which includes bottom lock Doppler sonar and long baseline (LBL) navigation. Together these data allow us, for the first time, to visualize portions of Ridge 2000 Integrated Study Sites (ISS) at 1-m vertical and horizontal resolution. These maps resolve morphological details of structures within the summit trough at scales that are relevant to biological communities (e.g. hydrothermal vents, lava pillars, trough walls), thus providing the important geologic context necessary to better understand spatial patterns associated with integrated biological-hydrothermal-geological processes. The Imagenex sonar is also a permanent sensor on the Jason2 ROV, which is also equipped with an SM2000 (200 kHz) near-bottom multibeam sonar. In the future, it is envisioned that near-bottom multibeam sonars will be standard sensors on all National Deep Submergence Facility (NDSF) vehicles. Streamlining data processing protocols makes these datasets more accessible to NDSF users and ensures broad compatibility between data formats among NDSF vehicle systems and allied vehicles (e.g. ABE). Establishing data processing protocols and software suites, routinely calibrating sensors (e

The Mid-Ocean Ridge.

ERIC Educational Resources Information Center

Macdonald, Kenneth C.; Fox, Paul J.

1990-01-01

Described are concepts involved with the formation and actions of the Mid-Ocean Ridge. Sea-floor spreading, the magma supply model, discontinuities, off-axis structures, overlaps and deviation, and aquatic life are discussed. (CW)

Banded Ridges in Hellas

NASA Image and Video Library

2014-01-09

Low lying areas in the Hellas region, which is the largest impact basin on Mars, often show complex groups of banded ridges, furrows, and pits as seen in this observation from NASA Mars Reconnaissance Orbiter.

Structure and origin of the J Anomaly Ridge, western North Atlantic Ocean

NASA Astrophysics Data System (ADS)

Tucholke, Brian E.; Ludwig, William J.

1982-11-01

The J Anomaly Ridge is a structural ridge or step in oceanic basement that extends southwest from the eastern end of the Grand Banks. It lies beneath the J magnetic anomaly at the young end (M-4 to M-0) of the M series magnetic anomalies. Its structural counterpart beneath the J anomaly in the eastern Atlantic is the Madeira-Tore Rise, but this feature has been overprinted by post-middle Cretaceous deformation and volcanism. In order to study the origin and evolution of the J Anomaly Ridge-Madeira-Tore Rise system, we obtained seismic refraction and multichannel reflection profiles across the J Anomaly Ridge near 39°N latitude. The western ridge flank consists of a series of crustal blocks downdropped along west-dipping normal faults, but the eastern slope to younger crust is gentle and relatively unfaulted. The western flank also is subparallel to seafloor isochrons, becoming younger to the south. Anomalously smooth basement caps the ridge crest, and it locally exhibits internal, eastward-dipping reflectors similar in configuration to those within subaerially emplaced basalt flows on Iceland. When isostatically corrected for sediment load, the northern part of the J Anomaly Ridge has basement depths about 1400 m shallower than in our study area, and deep sea drilling has shown that the northern ridge was subaerially exposed during the middle Cretaceous. We suggest that most of the system originated under subaerial conditions at the time of late-stage rifting between the adjacent Grand Banks and Iberia. The excess magma required to form the ridge may have been vented from a mantle plume beneath the Grand Banks-Iberia rift zone and channelled southward beneath the rift axis of the abutting Mid-Atlantic Ridge. Resulting edifice-building volcanism constructed the ridge system between anomalies M-4 and M-0, moving southward along the ridge axis at about 50 mm/yr. About M-0 time, when true drift began between Iberia and the Grand Banks, this southward venting rapidly

The Central Symmetry Analysis of Wrinkle Ridges in Lunar Mare Serenitatis

NASA Astrophysics Data System (ADS)

Yao, Meijuan; Chen, Jianping

2018-03-01

Wrinkle ridges are one of the most common structures usually found in lunar mare basalts, and their formations are closely related to the lunar mare. In this paper, wrinkle ridges in Mare Serenitatis were identified and mapped via high-resolution data acquired from SELENE, and a quantitative method was introduced to analyze the degree of central symmetry of the wrinkle ridges distributed in a concentric or radial pattern. Meanwhile, two methods were used to measure the lengths and orientations of wrinkle ridges before calculating their central symmetry value. Based on the mapped wrinkle ridges, we calculated the central symmetry value of the wrinkle ridges for the whole Mare Serenitatis as well as for the four circular ridge systems proposed by a previous study via this method. We also analyzed the factors that would cause discrepancies when calculating the central symmetry value. The results indicate that the method can be used to quantitatively analyze the degree of central symmetry of the linear features that were concentrically or radially oriented and can reflect the stress field characteristics.

Maxillary anterior ridge augmentation with recombinant human bone morphogenetic protein 2.

PubMed

Edmunds, Ryan K; Mealey, Brian L; Mills, Michael P; Thoma, Daniel S; Schoolfield, John; Cochran, David L; Mellonig, Jim

2014-01-01

No human studies exist on the use of recombinant human bone morphogenetic protein 2 (rhBMP-2) on an absorbable collagen sponge (ACS) as a sole graft material for lateral ridge augmentation in large ridge defect sites. This series evaluates the treatment outcome of maxillary anterior lateral ridge augmentation with rhBMP-2/ACS. Twenty patients were treated with rhBMP-2/ACS and fixation screws for space maintenance. Cone beam volumetric tomography measurements were used to determine gain in ridge width, and a bone core biopsy was obtained. The mean horizontal ridge gain was 1.2 mm across sites, and every site gained width.

Unfaulting the Sardarapat Ridge, Southwest Armenia

NASA Astrophysics Data System (ADS)

Wetmore, P.; Connor, C.; Connor, L. J.; Savov, I. P.; Karakhanyan, A.

2012-12-01

Armenia is located near the core of contractional deformation associated with the collision between the Arabian and Eurasian tectonic plates. Several studies of this region, including portions of adjacent Georgia, Iran, and Turkey, have indicated that 1-2 mm/yr of intra-plate, north-south shortening is primarily accommodated by a network of E-W trending thrust faults, and NW-trending (dextral) and NE-trending (sinistral) strike-slip faults. One proposed fault in this network, the Sardarapat Fault (SF), was investigated as part of a regional seismic hazard assessment ahead of the installation of a replacement reactor at the Armenian Nuclear Power Plant (ANPP). The SF is primarily defined by the Sardarapat Ridge (SR), which is a WNW-trending, 40-70 m high topographic feature located just north of the Arax River and the Turkey-Armenia border. The stratigraphy comprising this ridge includes alluvium overlying several meters of lacustrine deposits above a crystal-rich basaltic lava flow that yields an Ar-Ar age of 0.9 +/- 0.02 Ma. The alluvial sediments on the ridge contain early Bronze age (3832-3470 BP) artifacts at an elevation 25 m above those of the surrounding alluvial plane. This has lead to the suggestion that the SR is bound to the south (the steepest side) by the SF, which is uplifting the ridge at a rate of 0.7 mm/yr. However, despite the prominence and trend of the ridge there are no unequivocal observations, such as scarps or exposures of fault rocks, to support the existence of the SF. The goal of the investigation of the SR area was to test various models for the formation of the ridge including faulting and combined volcanic and erosional processes. We therefore collected gravimetric, magnetic, magneto-tellurics (MT), and transient electromagnetic (TEM) data across an area of ~400 km2, and used correlations of stratigraphic data from coreholes drilled proximal to the study area to define the geometry of the contact between the basement and basin fill to

Ridges on Europa: Origin by Incremental Ice-Wedging

NASA Technical Reports Server (NTRS)

Melosh, H. J.; Turtle, E. P.

2004-01-01

The surface of Europa is covered by ridges that display a variety of morphologies . The most common type is characterized by a double ridge divided by an axial trough. These ridges are, in general, narrow (typically only a few km across) and remarkably linear. They are up to a few hundred meters high and the inner and outer slopes appear to stand at the angle of repose . A number of diverse mechanisms have been proposed to explain the formation of these ubiquitous features , although none can fully account for all of their observed characteristics. We propose a different formation theory in which accumulation of material within cracks that open during the extensional phase of the tidal cycle prevents complete closure of the cracks during the tidal cycle s compressional phase. This accumulation deforms the surrounding ice and, in time, results in the growth of a landform remarkably similar to the ridges observed on Europa.

Martian Ridge Looming Above Curiosity Prior to Ascent

NASA Image and Video Library

2017-09-13

Researchers used the Mast Camera (Mastcam) on NASA's Curiosity Mars rover to gain this detailed view of layers in "Vera Rubin Ridge" from just below the ridge. The scene combines 70 images taken with the Mastcam's right-eye, telephoto-lens camera, on Aug. 13, 2017, during the 1,785th Martian day, or sol, of Curiosity's work on Mars. This and other Mastcam panoramas show details of the sedimentary rocks that make up the "Vera Rubin Ridge." This distinct topographic feature located on the lower slopes of Mount Sharp (Aeolis Mons) is characterized by the presence of hematite, an iron-oxide mineral, which has been detected from orbit. The Mastcam images show that the rocks making up the lower part of the ridge are characterized by distinct horizontal stratification with individual rock layers of the order of several inches (tens of centimeters) thick. Scientists on the mission are using such images to determine the ancient environment these rocks were deposited in. The repeated beds indicate progressive accumulation of sediments that now make up the lower part of Mount Sharp, although from this distance it is not possible to know if they were formed by aqueous or wind-blown processes. Close-up images collected as the rover climbs the ridge will help answer this question. The stratified rocks are cross cut by veins filled with a white mineral, likely calcium sulfate, that provide evidence of later episodes of fluid flow through the rocks. The panorama has been white-balanced so that the colors of the rock materials resemble how they would appear under daytime lighting conditions on Earth. It spans from southeast on the left to west on the right. The Sol 1785 location just north of the ridge is shown in a Sol 1782 traverse map. The ridge was informally named in early 2017 in memory of Vera Cooper Rubin (1928-2016), whose astronomical observations provided evidence for the existence of the universe's dark matter. An annotated figure is shown at https

Evidence for lateral mantle plume flow feeding the Central Indian Ridge

NASA Astrophysics Data System (ADS)

Murton, B. J.; Tindle, A. G.

2003-04-01

The Central Indian Ridge exhibits morphological and geochemical features indicating lateral flow of shallow plume asthenosphere from the Reunion hot-spot to the ridge axis. South of the Marie Celeste fracture zone, at 18.25°S, the Central Indian Ridge is bound by a southward closing, “V”-shaped region of shallow crust that extends for over 800 km. Over this distance, the ridge axis deepens to the south and is also affected by left-stepping offsets that bring it towards the west. The northern end of the ridge, which is closest to the island of La'Réunion, is shallowest and dominated by an inflated segment with associated sheet flows covering over 50 square kilometres. These morphological features are usually associated with ridge-hot-spot interaction. However, the nearest active hot-spot lies over 1100 km to the west beneath the island of La'Réunion. Geochemical trends for basalts erupted along the Central Indian Ridge demonstrate a gradient of northward decreasing MgO and increasing SiO2, indicating a relationship between shallower crust and increased magmatic fractional crystallisation. Superimposed on this gradient is an excess increase in incompatible element ratios, indicative of mantle enrichment to the north. The enrichment correlates with the spreading-parallel distance between the ridge axis and the edge of the "V"-shaped region of anomalously shallow crust. Locally, the enriched mantle component is found preferentially at third-order ridge offsets and adjacent to the rift walls demonstrating melting of a compositionally stratified, spinel-lherzolite mantle. These features are evidence for shallow, lateral flow of enriched hot-spot asthenosphere at a velocity of ~333 mm yr-1 and with a flux of at least 50 m3 s-1, through a mantle 'worm', towards the ridge axis where it migrates south at a rate of 54 - 67 mm per year. The trend of the geochemical enrichment points to mixing between deeper N-MORB and shallower Reunion hot-spot sources beneath the

A V-band wafer probe using ridge-trough waveguide

NASA Astrophysics Data System (ADS)

Godshalk, Edward M.

1991-12-01

A V-band (50-75 GHz) wafer probe is presented. The probe features a type of waveguide developed to allow transition from rectangular waveguide to coplanar waveguide. The waveguide consists of a ridge extending from the upper waveguide wall into a trough in the lower waveguide wall, and is known as the ridge-trough waveguide. A mathematical model is presented that allows important properties of the ridge-trough waveguide, such as the cutoff frequency and characteristic impedance, to be calculated.

Plate convergence and deformation, North Luzon Ridge, Philippines

NASA Astrophysics Data System (ADS)

Lewis, Stephen D.; Hayes, Dennis E.

1989-10-01

Marine geophysical and earthquake seismology data indicate that the North Luzon Ridge, a volcano-capped bathymetrie ridge system that extends between Luzon and Taiwan, is presently undergoing deformation in response to the relative motion between the Asian and Philippine Sea plates. Plate motion models predict convergence along the western side of the Philippine Sea plate, from Japan in the north to Indonesia in the south, and most of this plate margin is defined by active subduction zones. However, the western boundary of the Philippine Sea plate adjacent to the North Luzon Ridge shows no evidence of an active WNW-dipping subduction zone; this is in marked contrast to the presence of both the Philippine Trench/East Luzon Trough subduction zones to the south and the Ryukyu Trench subduction zone to the north. Crustal shortening, in response to ongoing plate convergence in the North Luzon Ridge region, apparently takes place through a complex pattern of strike-slip and thrust faulting, rather than by the typical subduction of oceanic lithosphere along a discreet zone. The curvilinear bathymetrie trends within the North Luzon Ridge represent the traces of active faults. The distribution of these faults, mapped by both multichannel and single-channel seismic reflection methods and earthquake seismicity patterns and focal mechanism solutions, suggest that right-lateral, oblique-slip faulting occurs along NE-trending faults, and left-lateral, oblique-slip faulting takes place on N- and NNW-trending faults. The relative plate convergence accommodated by the deformation of the North Luzon Ridge will probably be taken up in the future by the northward-propagating East Luzon Trough subduction zone.

Sinuous Ridge on the Orson Welles Bajada

NASA Image and Video Library

2015-04-22

Alluvial fans are piles of debris dumped by rivers when they emerge from the mountains and enter a mostly dry valley as seen by NASA Mars Reconnaissance Orbiter. A bajada (such as this example named after the famous American filmmaker) consists of a series of coalescing alluvial fans along a mountain front. On the surface of this bajada, one can see many sinuous ridges. These ridges mark the path that streams of water took as they flowed into this crater. The sinuosity of the ridges tells us something about the speed of the water flow. Fast moving flows tend to be straighter than slow-moving. Observations like this help us build a picture of how rivers behaved on ancient Mars. http://photojournal.jpl.nasa.gov/catalog/PIA19366

Reading Ombrone river delta evolution through beach ridges morphology

NASA Astrophysics Data System (ADS)

Mammi, Irene; Piccardi, Marco; Pranzini, Enzo; Rossi, Lorenzo

2017-04-01

The present study focuses on the evolution of the Ombrone River delta (Southern Tuscany, Italy) in the last five centuries, when fluvial sediment input was huge also as a consequence of the deforestation performed on the watershed. The aim of this study is to find a correlation between river input and beach ridges morphology and to explain the different distribution of wetlands and sand deposits on the two sides of the delta. Visible, NIR and TIR satellite images were processed to retrieve soil wetness associated to sand ridges and interdune silty deposits. High resolution LiDAR data were analysed using vegetation filter and GIS enhancement algorithms in order to highlight small morphological variations, especially in areas closer to the river where agriculture has almost deleted these morphologies. A topographic survey and a very high resolution 3D model obtained from a set of images acquired by an Unmanned Aerial Vehicle (UAV) were carried out in selected sites, both to calibrate satellite LiDAR 3D data, and to map low relief areas. Historical maps, aerial photography and written documents were analysed for dating ancient shorelines associated to specific beach ridges. Thus allowing the reconstruction of erosive and accretive phases of the delta. Seventy beach ridges were identified on the two wings of the delta. On the longer down-drift side (Northern wing) beach ridges are more spaced at the apex and gradually converge to the extremity, where the Bruna River runs and delimits the sub aerial depositional area of the Ombrone River. On the shorter up-drift lobe (Southern wing), beach ridges are closer, but run almost parallel each other. In this case, a rocky headland called Collelungo promontory closes and cuts the beach ridges sequence but shallow water depth allows sediment by pass. One kilometre to the south a more pronounced promontory encloses a small pocket beach (Cala di Forno) and identifies the limit of the subaerial depositionary area. Beach ridges

Continental Affinities of the Alpha Ridge

NASA Astrophysics Data System (ADS)

Jackson, H. Ruth; Li, Qingmou; Shimeld, John; Chian, Deping

2017-04-01

Identifying the crustal attributes of the Alpha Ridge (AR) part of the High Arctic Large Igneous Province and tracing the spreading centre across the Amerasia Basin plays a key role in understanding the opening history of the Arctic Ocean. In this approach, we report the evidence for a continental influence on the development of the AR and reduced ocean crust in the Amerasia Basin. These points are inferred from a documented continental sedimentation source in the Amerasia Basin and calculated diagnostic compressional and shear refraction waves, and from the tracing of the distinct spreading centre using the potential field data. (1) The circum-Arctic geology of the small polar ocean provides compelling evidence of a long-lived continental landmass north of the Sverdrup Basin in the Canadian Arctic Islands and north of the Barents Sea continental margin. Based on sediment distribution patterns in the Sverdrup Basin a continental source is required from the Triassic to mid Jurassic. In addition, an extensive continental sediment source to the north of the Barents Sea is required until the Barremian. (2) Offshore data suggest a portion of continental crust in the Alpha and Mendeleev ridges including measured shear wave velocities, similarity of compressional wave velocities with large igneous province with continental fragments and magnetic patterns. Ocean bottom seismometers recorded shear waves velocities that are sensitive to the quartz content of rocks across the Chukchi Borderland and the Mendeleev Ridge that are diagnostic of both an upper and lower continental crust. On the Nautilus Spur of the Alpha Ridge expendable sonobuoys recorded clear converted shear waves also consistent with continental crust. The magnetic patterns (amplitude, frequency, and textures) on the Northwind Ridge and the Nautilus Spur also have similarities. In fact only limited portions of the deepest water portions of the Canada Basin and the Makarov Basin have typical oceanic layer 2 and

CUTIN SYNTHASE 2 Maintains Progressively Developing Cuticular Ridges in Arabidopsis Sepals.

PubMed

Hong, Lilan; Brown, Joel; Segerson, Nicholas A; Rose, Jocelyn K C; Roeder, Adrienne H K

2017-04-03

The cuticle is a crucial barrier on the aerial surfaces of land plants. In many plants, including Arabidopsis, the sepals and petals form distinctive nanoridges in their cuticles. However, little is known about how the formation and maintenance of these nanostructures is coordinated with the growth and development of the underlying cells. Here we report the characterization of the Arabidopsis cutin synthase 2 (cus2) mutant, which causes a great reduction in cuticular ridges on the mature sepal epidermis, but only a moderate effect on petal cone cell ridges. Using scanning electron microscopy and confocal live imaging combined with quantification of cellular growth, we find that cuticular ridge formation progresses down the sepal from tip to base as the sepal grows. pCUS2::GFP-GUS reporter expression coincides with cuticular ridge formation, descending the sepal from tip to base. Ridge formation also coincides with the reduction in growth rate and termination of cell division of the underlying epidermal cells. Surprisingly, cuticular ridges at first form normally in the cus2 mutant, but are lost progressively at later stages of sepal development, indicating that CUS2 is crucial for the maintenance of cuticular ridges after they are formed. Our results reveal the dynamics of both ridge formation and maintenance as the sepal grows. Copyright © 2017 The Author. Published by Elsevier Inc. All rights reserved.

Transitions in axial morphology along the Southeast Indian Ridge

NASA Astrophysics Data System (ADS)

Ma, Ying; Cochran, James R.

1996-07-01

Shipboard bathymetric and magnetic profiles across the Southeast Indian Ridge (SEIR) were analyzed in order to examine the nature of along-axis variations in axial morphology at this intermediate spreading rate ridge. Three types of axial morphology are observed along the SEIR: an axial high, a shallow (200-700 m deep) axial valley and a deep (>1000 m deep) axial valley. An axial high is found to the east of the Australian-Antarctic Discordance (AAD) (east of 128°E) and between 82°E and 104°E. A shallow rift valley is found from 104°E to 114°E and from 82°E westward past the Amerstdam/St. Paul hotspot (ASP) to about 30°S, 75°E. Deep rift valleys are found from 114°E to 128°E in the vicinity of the AAD and from the Indian Ocean Triple Junction (IOTJ) at 25°S, 70°E to about 30°S, 75°E. The transition near 30°S occurs in an area of constant zero-age depth and does not appear to result from an increase in mantle temperature. It could be the result of the rapid increase in spreading rate along that portion of the SEIR. The most likely cause of the other transitions in axial morphology is variations in mantle temperature. The transitions between the different types of axial morphology are well defined and occur over a limited distance. Transitions in axial morphology are accompanied by significant changes in ridge flank topographic roughness. The transitions from axial valleys to axial highs are also accompanied by changes in the amplitude of the seafloor magnetic anomalies. Our observations suggest that there are distinct modes rather than a continuum of axial morphology on the SEIR and that there appears to be a "threshold" mechanism for a rapid change between different states of axial morphology. The ASP has only a limited influence on the SEIR. The ridge axis is marked by an axial valley for the entire distance from the IOTJ up to and past the ASP. The ridge axis becomes shallower as the ASP is approached from the northwest but only by about 300 m over

Alveolar Ridge Split Technique Using Piezosurgery with Specially Designed Tips

PubMed Central

Moro, Alessandro; Foresta, Enrico; Falchi, Marco; De Angelis, Paolo; D'Amato, Giuseppe; Pelo, Sandro

2017-01-01

The treatment of patients with atrophic ridge who need prosthetic rehabilitation is a common problem in oral and maxillofacial surgery. Among the various techniques introduced for the expansion of alveolar ridges with a horizontal bone deficit is the alveolar ridge split technique. The aim of this article is to give a description of some new tips that have been specifically designed for the treatment of atrophic ridges with transversal bone deficit. A two-step piezosurgical split technique is also described, based on specific osteotomies of the vestibular cortex and the use of a mandibular ramus graft as interpositional graft. A total of 15 patients were treated with the proposed new tips by our department. All the expanded areas were successful in providing an adequate width and height to insert implants according to the prosthetic plan and the proposed tips allowed obtaining the most from the alveolar ridge split technique and piezosurgery. These tips have made alveolar ridge split technique simple, safe, and effective for the treatment of horizontal and vertical bone defects. Furthermore the proposed piezosurgical split technique allows obtaining horizontal and vertical bone augmentation. PMID:28246596

Constrained circulation at Endeavour ridge facilitates colonization by vent larvae.

PubMed

Thomson, Richard E; Mihály, Steven F; Rabinovich, Alexander B; McDuff, Russell E; Veirs, Scott R; Stahr, Frederick R

2003-07-31

Understanding how larvae from extant hydrothermal vent fields colonize neighbouring regions of the mid-ocean ridge system remains a major challenge in oceanic research. Among the factors considered important in the recruitment of deep-sea larvae are metabolic lifespan, the connectivity of the seafloor topography, and the characteristics of the currents. Here we use current velocity measurements from Endeavour ridge to examine the role of topographically constrained circulation on larval transport along-ridge. We show that the dominant tidal and wind-generated currents in the region are strongly attenuated within the rift valley that splits the ridge crest, and that hydrothermal plumes rising from vent fields in the valley drive a steady near-bottom inflow within the valley. Extrapolation of these findings suggests that the suppression of oscillatory currents within rift valleys of mid-ocean ridges shields larvae from cross-axis dispersal into the inhospitable deep ocean. This effect, augmented by plume-driven circulation within rift valleys having active hydrothermal venting, helps retain larvae near their source. Larvae are then exported preferentially down-ridge during regional flow events that intermittently over-ride the currents within the valley.

Accretion mode of oceanic ridges governed by axial mechanical strength

NASA Astrophysics Data System (ADS)

Sibrant, A. L. R.; Mittelstaedt, E.; Davaille, A.; Pauchard, L.; Aubertin, A.; Auffray, L.; Pidoux, R.

2018-04-01

Oceanic spreading ridges exhibit structural changes as a function of spreading rate, mantle temperature and the balance of tectonic and magmatic accretion. The role that these or other processes have in governing the overall shape of oceanic ridges is unclear. Here, we use laboratory experiments to simulate ridge spreading in colloidal aqueous dispersions whose rheology evolves from purely viscous to elastic and brittle when placed in contact with a saline water solution. We find that ridge shape becomes increasingly linear with spreading rate until reaching a minimum tortuosity. This behaviour is predicted by the axial failure parameter ΠF, a dimensionless number describing the balance of brittle and plastic failure of axial lithosphere. Slow-spreading, fault-dominated and fast-spreading, fluid intrusion-dominated ridges on Earth and in the laboratory are separated by the same critical ΠF value, suggesting that the axial failure mode governs ridge geometry. Values of ΠF can also be calculated for different mantle temperatures and applied to other planets or the early Earth. For higher mantle temperatures during the Archaean, our results preclude the predicted formation of large tectonic plates at high spreading velocity.

Alveolar Ridge Split Technique Using Piezosurgery with Specially Designed Tips.

PubMed

Moro, Alessandro; Gasparini, Giulio; Foresta, Enrico; Saponaro, Gianmarco; Falchi, Marco; Cardarelli, Lorenzo; De Angelis, Paolo; Forcione, Mario; Garagiola, Umberto; D'Amato, Giuseppe; Pelo, Sandro

2017-01-01

The treatment of patients with atrophic ridge who need prosthetic rehabilitation is a common problem in oral and maxillofacial surgery. Among the various techniques introduced for the expansion of alveolar ridges with a horizontal bone deficit is the alveolar ridge split technique. The aim of this article is to give a description of some new tips that have been specifically designed for the treatment of atrophic ridges with transversal bone deficit. A two-step piezosurgical split technique is also described, based on specific osteotomies of the vestibular cortex and the use of a mandibular ramus graft as interpositional graft. A total of 15 patients were treated with the proposed new tips by our department. All the expanded areas were successful in providing an adequate width and height to insert implants according to the prosthetic plan and the proposed tips allowed obtaining the most from the alveolar ridge split technique and piezosurgery. These tips have made alveolar ridge split technique simple, safe, and effective for the treatment of horizontal and vertical bone defects. Furthermore the proposed piezosurgical split technique allows obtaining horizontal and vertical bone augmentation.

Tectonic evolution of Gorda Ridge inferred from sidescan sonar images

USGS Publications Warehouse

Masson, D.G.; Cacchione, D.A.; Drake, D.E.

1988-01-01

Gorda Ridge is the southern segment of the Juan de Fuca Ridge complex, in the north-east Pacific. Along-strike spreading-rate variation on Gorda Ridge and deformation of Gorda Plate are evidence for compression between the Pacific and Gorda Plates. GLORIA sidescan sonographs allow the spreading fabric associated with Gorda Ridge to be mapped in detail. Between 5 and 2 Ma, a pair of propagating rifts re-orientated the northern segment of Gorda Ridge by about 10?? clockwise, accommodating a clockwise shift in Pacific-Juan de Fuca plate motion that occurred around 5 Ma. Deformation of Gorda Plate, associated with southward decreasing spreading rates along southern Gorda Ridge, is accommodated by a combination of clockwise rotation of Gorda Plate crust, coupled with left-lateral motion on the original normal faults of the ocean crust. Segments of Gorda Plate which have rotated by different amounts are separated by narrow deformation zones across which sharp changes in ocean fabric trend are seen. Although minor lateral movement may occur on these NW to WNW structures, no major right-lateral movement, as predicted by previous models, is observed. ?? 1988 Kluwer Academic Publishers.

Zinc, copper, and lead in mid-ocean ridge basalts and the source rock control on Zn/Pb in ocean-ridge hydrothermal deposits

USGS Publications Warehouse

Doe, B.R.

1994-01-01

The contents of Zn, Cu, and Pb in mid-ocean ridge basalts (MORB) and the MORB source-rock control on Zn/Pb in ocean-ridge hydrothermal deposits are examined. The values of Zn, Cu, and Pb for submarine mid-ocean ridge basalts (MORB) are, respectively (in ppm): average MORB-75, 75, and 0.7; West Valley, Juan de Fuca Ridge (JFR)-87, 64, and 0.5; southern JFR-120 and 0.5; and 21??N, East Pacific Rise (EPR)-73, 78, and 0.5. Values of Zn/Pb range from about 100-240 and Cu/ Pb from 100-156. In this study, Zn is found to correlate positively with TiO2 + FeO (mean square of weighted deviates, MSWD, of 1.6 for JFR basalt), and inversely with Mg number (MSWD of 3.5). Therefore, contrary to statements in the literature that Zn should be compatible in MORB, Zn is a mildly incompatible element and must be enriched in the glass phase relative to olivine as Zn does not fit into the other major phenocryst phase, plagioclase. In the source of MORB, Zn likely is most enriched in oxides: spinel, magnetite, and titanomagnetite. Copper generally does not correlate well with other elements in most MORB data examined. When differentiation is dominated by olivine, Cu has a tendency to behave incompatibly (e.g., at Mg numbers > 70), but, overall, Cu shows some tendency towards being a compatible element, particularly along the Mid-Atlantic Ridge, a behavior presumably due to separation of sulfides in which Cu (but not Zn) is markedly enriched. Copper thus may be in dispersed sulfides in the source of MORB. Ocean ridges provide important data on source-rock controls for sulfide deposits because, in sediment-starved ridges, much is known about the possible source rocks and mineralization is presently occurring. In contrast to Zn/Pb ~5 in continental hot Cl-rich brines, Zn/Pb in the hottest sediment-starved ridge black smoker hydrothermal fluids at 21 ??N, EPR is about 110, similar to local MORB (145), but Cu/Pb is closer to 30, possibly due to subsurface deposition of Cu. At the JFR, the best

Pronounced Shear Velocity Asymmetry in the Mantle Across the Juan de Fuca Ridge and Curious Lack of Features at the Gorda Ridge

NASA Astrophysics Data System (ADS)

Bell, S. W.; Ruan, Y.; Forsyth, D. W.

2015-12-01

With new Rayleigh-wave tomography results, we have detected a clear and strong asymmetry in the shear velocity structure of the Juan de Fuca ridge. Concentrated in a relatively thin layer with a depth range of ~30-60km, there lies a region of very low shear velocity, with velocities ranging from ~3.8km/s to 4.0km/s. Such low velocities provide strong evidence for the presence of partial melt. This low-velocity region is highly asymmetric, extending much further west than east of the ridge. Especially at shallow depths of ~35 km, this low-velocity region is concentrated just west of the southern portion of the ridge. Peaking near the Axial Seamount, the youngest of the Cobb-Eickelberg Seamounts, it extends south to the region around the small Vance Seamounts just north of the junction with the Blanco Fracture Zone. The Juan de Fuca plate is relatively stationary in the hotspot reference frame, and the Juan de Fuca ridge migrates westward in the hotspot reference frame. Seamounts are overwhelmingly concentrated on the western flank of the ridge, and an asymmetric upwelling driven by migration in the hotspot reference frame has been proposed to explain the seamount asymmetry (i.e. Davis and Karsten, 1986). Our velocity asymmetry, which matches the seamount asymmetry, provides evidence for this asymmetric upwelling and its connection to migration in the absolute hotspot reference frame. In the shear velocity results, the Gorda ridge displays a remarkable lack of features, with no clearly identifiable expression in the subsurface velocity. There is evidence of a broad low-velocity feature beneath Gorda beginning at a depth of ~150 km, but no clear shallow features can be tied to the ridge. At the depths we can resolve (~25-250km), the anisotropy beneath and within the Juan de Fuca plate is small, indicating a deep source of the shear wave splitting results (Bodmer et al., in press), which indicate a fast axis aligned with the Juan de Fuca plate's absolute motion. Around

Solar cell with doped groove regions separated by ridges

DOEpatents

Molesa, Steven Edward; Pass, Thomas; Kraft, Steve

2017-01-31

Solar cells with doped groove regions separated by ridges and methods of fabricating solar cells are described. In an example, a solar cell includes a substrate having a surface with a plurality of grooves and ridges. A first doped region of a first conductivity type is disposed in a first of the grooves. A second doped region of a second conductivity type, opposite the first conductivity type, is disposed in a second of the grooves. The first and second grooves are separated by one of the ridges.

Magma Supply at the Arctic Gakkel Ridge: Constraints from Peridotites and Basalts

NASA Astrophysics Data System (ADS)

Sun, C.; Dick, H. J.; Hellebrand, E.; Snow, J. E.

2015-12-01

Crustal thickness in global ridge systems is widely believed to be nearly uniform (~7 km) at slow- and fast-spreading mid-ocean ridges, but appears significantly thinner (< ~4 km) at ultraslow-spreading ridges. At the slowest-spreading Arctic Gakkel Ridge, the crust becomes extremely thin (1.4 - 2.9 km; [1]). The thin crust at the Gakkel and other ultraslow-spreading ridges, has been attributed to lithosphere thickening, ancient mantle depletion, lower mantle temperature, ridge obliquity, and melt retention/focusing. To better understand the magma supply at ultraslow-spreading ridges, we examined melting dynamics by linking peridotites and basalts dredged along the Gakkel Ridge. We analyzed rare earth elements in clinopyroxene from 84 residual peridotites, and estimated melting parameters for individual samples through nonlinear least squares analyses. The degrees of melting show a large variation but mainly center at around 7% assuming a somewhat arbitrary but widely used depleted MORB mantle starting composition. Thermobarometry on published primitive basaltic glasses from [2] indicates that the mantle potential temperature at the Gakkel Ridge is ~50°C cooler than that at the East Pacific Rise. The ridge-scale low-degree melting and lower mantle potential temperature place the final depth of melting at ~30 km and a melt thickness of 1.0 or 2.9 km for a triangular or trapezoidal melting regime, respectively. The final melting depth is consistent with excess conductive cooling and lithosphere thickening suggested by geodynamic models, while the estimated melt thickness is comparable to the seismic crust (1.4 - 2.9 km; [1]). The general agreement among geochemical analyses, seismic measurements, and geodynamic models supports that lower mantle potential temperature and thick lithosphere determine the ridge-scale low-degree melting and thin crust at the Gakkel Ridge, while melt retention/focusing and excess ancient mantle depletion are perhaps locally important at

Beach ridge sedimentology: field observation and palaeoenvironmental interpretation for Anegada Island, British Virgin Islands.

NASA Astrophysics Data System (ADS)

Cescon, Anna Lisa; Cooper, J. Andrew G.; Jackson, Derek W. T.

2014-05-01

Beach ridge landforms have been observed in different environments and in settings that range from polar to tropical. Their stratigraphy and sedimentology has received a limited amount of discussion in the literature (Tamura, 2012). In coastal geomorphology a beach ridge can be seen as a transitional deposit between onshore and offshore environments. They are regarded as representing high level wave action along a coastline. In the Caribbean the origin of beach ridges has been variously attributed to one of three extreme wave events: extreme swell, extreme storm or tsunami waves. Beach ridges are arranged in beach ridge plains where there is succession of the landforms and can be several kilometres long. Beach ridge accumulation is not continuous and the coast shows alternating accretion and erosion periods. The use of beach ridges as palaeostorm archives is therefore not straightforward. The temporal continuity of beach ridge formation is being assessed on the beach ridge plains of Anegada, British Virgin Islands (Lesser Antilles). This carbonate platform surrounded by a fringing reef contains two beach ridge plains. There are more than 30 ridges in the Atlantic facing- coast and around 10 in the south, Caribbean- facing coast. The sediments of the modern beaches are dominated by the sand fraction and are 100% biogenic origin due to the isolation of Anegada from terrestrial sediment sources. The beach ridge sections have been studied in different area of Anegada beach ridge plains and present low angle seaward-dipping bedding. The sand fraction is dominant in the stratigraphy with a few intact shells. At only one site were coral pebbles deposited in association with the sand fraction. Aeolian deposits represent the upper part of the beach ridges and reflect the stabilization of the beach ridges with ongoing accretion. The sedimentology of the contemporary beach and dunes will be discussed in terms of their implications for understanding beach ridge genesis and its

Oak Ridge TNS Program: system description manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reid, R.L.; Becraft, W.R.; Brown, T.G.

1979-05-01

This document provides a systems description of the Reference Design for The Next Step (TNS) evolved at Oak Ridge National Laboratory (ORNL) during FY 1978. The description is presented on the basis of 24 individual device and facility systems. Additional information on these systems, the Reference Design, and the FY 1978 Oak Ridge TNS activities can be found in the associated technical memoranda, ORNL/TM-6720 and ORNL/TM-6722--ORNL/TM-6733.

Ridge-trench collision in Archean and Post-Archean crustal growth: Evidence from southern Chile

NASA Technical Reports Server (NTRS)

Nelson, E. P.; Forsythe, R. D.

1988-01-01

The growth of continental crust at convergent plate margins involves both continuous and episodic processes. Ridge-trench collision is one episodic process that can cause significant magmatic and tectonic effects on convergent plate margins. Because the sites of ridge collision (ridge-trench triple junctions) generally migrate along convergent plate boundaries, the effects of ridge collision will be highly diachronous in Andean-type orogenic belts and may not be adequately recognized in the geologic record. The Chile margin triple junction (CMTJ, 46 deg S), where the actively spreading Chile rise is colliding with the sediment-filled Peru-Chile trench, is geometrically and kinematically the simplest modern example of ridge collision. The south Chile margin illustrates the importance of the ridge-collision tectonic setting in crustal evolution at convergent margins. Similarities between ridge-collision features in southern Chile and features of Archean greenstone belts raise the question of the importance of ridge collision in Archean crustal growth. Archean plate tectonic processes were probably different than today; these differences may have affected the nature and importance of ridge collision during Archean crustal growth. In conclusion, it is suggested that smaller plates, greater ridge length, and/or faster spreading all point to the likelihood that ridge collision played a greater role in crustal growth and development of the greenstone-granite terranes during the Archean. However, the effects of modern ridge collision, and the processes involved, are not well enough known to develop specific models for the Archean ridge collison.

Ridge-branch-based blood vessel detection algorithm for multimodal retinal images

NASA Astrophysics Data System (ADS)

Li, Y.; Hutchings, N.; Knighton, R. W.; Gregori, G.; Lujan, B. J.; Flanagan, J. G.

2009-02-01

Automatic detection of retinal blood vessels is important to medical diagnoses and imaging. With the development of imaging technologies, various modals of retinal images are available. Few of currently published algorithms are applied to multimodal retinal images. Besides, the performance of algorithms with pathologies is expected to be improved. The purpose of this paper is to propose an automatic Ridge-Branch-Based (RBB) detection algorithm of blood vessel centerlines and blood vessels for multimodal retinal images (color fundus photographs, fluorescein angiograms, fundus autofluorescence images, SLO fundus images and OCT fundus images, for example). Ridges, which can be considered as centerlines of vessel-like patterns, are first extracted. The method uses the connective branching information of image ridges: if ridge pixels are connected, they are more likely to be in the same class, vessel ridge pixels or non-vessel ridge pixels. Thanks to the good distinguishing ability of the designed "Segment-Based Ridge Features", the classifier and its parameters can be easily adapted to multimodal retinal images without ground truth training. We present thorough experimental results on SLO images, color fundus photograph database and other multimodal retinal images, as well as comparison between other published algorithms. Results showed that the RBB algorithm achieved a good performance.

Ultra-fast pulse propagation in nonlinear graphene/silicon ridge waveguide

NASA Astrophysics Data System (ADS)

Liu, Ken; Zhang, Jian Fa; Xu, Wei; Zhu, Zhi Hong; Guo, Chu Cai; Li, Xiu Jian; Qin, Shi Qiao

2015-11-01

We report the femtosecond laser propagation in a hybrid graphene/silicon ridge waveguide with demonstration of the ultra-large Kerr coefficient of graphene. We also fabricated a slot-like graphene/silicon ridge waveguide which can enhance its effective Kerr coefficient 1.5 times compared with the graphene/silicon ridge waveguide. Both transverse-electric-like (TE-like) mode and transverse-magnetic-like (TM-like) mode are experimentally measured and numerically analyzed. The results show nonlinearity dependence on mode polarization not in graphene/silicon ridge waveguide but in slot-like graphene/silicon ridge waveguide. Great spectral broadening was observed due to self-phase modulation (SPM) after propagation in the hybrid waveguide with length of 2 mm. Power dependence property of the slot-like hybrid waveguide is also measured and numerically analyzed. The results also confirm the effective Kerr coefficient estimation of the hybrid structures. Spectral blue shift of the output pulse was observed in the slot-like graphene/silicon ridge waveguide. One possible explanation is that the blue shift was caused by the ultra-fast free carrier effect with the optical absorption of the doped graphene. This interesting effect can be used for soliton compression in femtosecond region. We also discussed the broadband anomalous dispersion of the Kerr coefficient of graphene.

Mechanics of gravitational spreading of steep-sided ridges («sackung»)

USGS Publications Warehouse

Savage, W.Z.; Varnes, D.J.

1987-01-01

Large-scale gravitational spreading of steep-sided ridges characterized by linear fissures, trenches, and uphill-facing scarps high on the sides and tops of ridges are known worldwide. Such spreading, termed sackung, is commonly attributed to pervasive plastic deformation of a rock mass, and is here analyzed as such. Beginning with a previously developed exact elastic solution for gravity-induced stresses in a symmetric ridge, stresses calculated from the exact solution are used in the Coulomb failure criterion to determine the extent of ridge failure under self-weight. Finally, when the regions of failure are established, a plastic flow solution is applied to predict the location of and sense of movement on upward-facing scarps near ridge crests and other features common in sackung. ?? 1987 International Assocaition of Engineering Geology.

Melton Valley Storage Tanks Capacity Increase Project, Oak Ridge National Laboratory, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-04-01

The US Department of Energy (DOE) proposes to construct and maintain additional storage capacity at Oak Ridge National Laboratory (ORNL), Oak Ridge, Tennessee, for liquid low-level radioactive waste (LLLW). New capacity would be provided by a facility partitioned into six individual tank vaults containing one 100,000 gallon LLLW storage tank each. The storage tanks would be located within the existing Melton Valley Storage Tank (MVST) facility. This action would require the extension of a potable water line approximately one mile from the High Flux Isotope Reactor (HFIR) area to the proposed site to provide the necessary potable water for themore » facility including fire protection. Alternatives considered include no-action, cease generation, storage at other ORR storage facilities, source treatment, pretreatment, and storage at other DOE facilities.« less

The Effects of Ridge Axis Width on Mantle Melting at Mid-Ocean Ridges

NASA Astrophysics Data System (ADS)

Montesi, L.; Magni, V.; Gaina, C.

2017-12-01

Mantle upwelling in response to plate divergence produces melt at mid-ocean ridges. Melt starts when the solidus is crossed and stops when conductive cooling overcomes heat advection associated with the upwelling. Most mid-ocean ridge models assume that divergence takes place only in a narrow zone that defines the ridge axis, resulting in a single upwelling. However, more complex patterns of divergence are occasionally observed. The rift axis can be 20 km wide at ultraslow spreading center. Overlapping spreading center contain two parallel axes. Rifting in backarc basins is sometimes organized as a series of parallel spreading centers. Distributing plate divergence over several rifts reduces the intensity of upwelling and limits melting. Can this have a significant effect on the expected crustal thickness and on the mode of melt delivery at the seafloor? We address this question by modeling mantle flow and melting underneath two spreading centers separated by a rigid block. We adopt a non-linear rheology that includes dislocation creep, diffusion creep and yielding and include hydrothermal cooling by enhancing thermal conductivity where yielding takes place. The crustal thickness decreases if the rifts are separated by 30 km or more but only if the half spreading rate is between 1 and 2 cm/yr. At melting depth, a single upwelling remains the norm until the separation of the rifts exceeds a critical value ranging from 15 km in the fastest ridges to more than 50 km at ultraslow spreading centers. The stability of the central upwelling is due to hydrothermal cooling, which prevents hot mantle from reaching the surface at each spreading center. When hydrothermal cooling is suppressed, or the spreading centers are sufficiently separated, the rigid block becomes extremely cold and separates two distinct, highly asymmetric upwellings that may focus melt beyond the spreading center. In that case, melt delivery might drive further and further the divergence centers, whereas

Noachian Impact Ejecta on Murray Ridge and Pre-impact Rocks on Wdowiak Ridge, Endeavour Crater, Mars: Opportunity Observations

NASA Technical Reports Server (NTRS)

Mittlefehldt, D. W.; Gellert, R.; Ming, D. W.; Morris, R. V.; Schroeder, C.; Yen, A. S.; Farrand, W. H.; Arvidson, R. E.; Franklin, B. J.; Grant, J. A.;

Pelagic erosion and sedimentation north of Carnegie Ridge, eastern equatorial Pacific

NASA Astrophysics Data System (ADS)

Brooks, C. K.; Lyle, M. W.; Marcantonio, F.; Lewis, D. M.; Paul, C.

2011-12-01

The Carnegie Ridge is one of three bathymetric highs bounding the Panama Basin and is known to exhibit erosion and redeposition of pelagic sediments. The extent of erosion and redeposition was studied during the R/V Melville cruise MV1014 in November 2010 to compare with geochemical estimates of sediment focusing. The MV1014 cruise acquired geochemical, geological and geophysical data using multichannel 2-D seismic and 3.5 kHz sub-bottom profiler, swathmap bathymetry, coring, and water casts. The seismic reflection, digital sub-bottom profiler and swathmap bathymetry data were used to investigate biogenic sedimentary deposition in the Panama Basin and erosion from Carnegie Ridge. We compare the new geophysical results with drilling on ODP Leg 202, the NEMO-03 site survey cruise for Leg 202, an early survey from 1969 and other data compiled by Ecuadorian surveys. Areas of non-deposition and/or erosion include the bathymetric highs along the ridge, seamounts, and an area of interest, a valley located on the northwestern flank of the ridge. The valley encompasses 183 km2 and exhibits large scale erosion, cutting down through sediments deposited over the 10-million year life of this segment of the Carnegie Ridge. All other valleys located within the Carnegie Ridge study area demonstrate ample deposition with sedimentary packages ranging from 200-800m with an average value trending around 400m. Higher sediment deposition is found in basins to the north of the erosional valley but similar sedimentation is also found even further north, beyond intervening high topography. The thickest sediment deposit near the Carnegie Ridge is actually found on the southern flank of the ridge, more than 100 km to the south of the survey area. Digital chirp sub-bottom profiler data combined with high-resolution seismic illustrate changes in sedimentation and erosion on the Carnegie Ridge, highlighting the dynamic sedimentary environment.

Strike-slip faulting of ridged plains near Valles Marineris, Mars

NASA Astrophysics Data System (ADS)

Schultz, R. A.

1989-10-01

This paper identifies and documents several well-preserved examples of Martian strike-slip faults and examines their relationships to wrinkle-ridges. The strike-slip faulting predates or overlaps periods of wrinkle-ridge growth southeast of Valles Marineris, and some wrinkle ridges may have nucleated and grown as a result of strike-slip displacements along the echelon fault arrays. Lateral displacements of several km inferred along these arrays may be related to tectonism in Tharsis.

Evidence for chemically heterogeneous Arctic mantle beneath the Gakkel Ridge

NASA Astrophysics Data System (ADS)

D'Errico, Megan E.; Warren, Jessica M.; Godard, Marguerite

2016-02-01

Ultraslow spreading at mid-ocean ridges limits melting due to on-axis conductive cooling, leading to the prediction that peridotites from these ridges are relatively fertile. To test this, we examined abyssal peridotites from the Gakkel Ridge, the slowest spreading ridge in the global ocean ridge system. Major and trace element concentrations in pyroxene and olivine minerals are reported for 14 dredged abyssal peridotite samples from the Sparsely Magmatic (SMZ) and Eastern Volcanic (EVZ) Zones. We observe large compositional variations among peridotites from the same dredge and among dredges in close proximity to each other. Modeling of lherzolite trace element compositions indicates varying degrees of non-modal fractional mantle melting, whereas most harzburgite samples require open-system melting involving interaction with a percolating melt. All peridotite chemistry suggests significant melting that would generate a thick crust, which is inconsistent with geophysical observations at Gakkel Ridge. The refractory harzburgites and thin overlying oceanic crust are best explained by low present-day melting of a previously melted heterogeneous mantle. Observed peridotite compositional variations and evidence for melt infiltration demonstrates that fertile mantle components are present and co-existing with infertile mantle components. Melt generated in the Gakkel mantle becomes trapped on short length-scales, which produces selective enrichments in very incompatible rare earth elements. Melt migration and extraction may be significantly controlled by the thick lithosphere induced by cooling at such slow spreading rates. We propose the heterogeneous mantle that exists beneath Gakkel Ridge is the consequence of ancient melting, combined with subsequent melt percolation and entrapment.

Buldir Depression - A Late Tertiary graben on the Aleutian Ridge, Alaska

USGS Publications Warehouse

Marlow, M. S.; Scholl, D. W.; Buffington, E.C.; Boyce, R.E.; Alpha, T.R.; Smith, P.J.; Shipek, C.J.

1970-01-01

Buldir Depression is a large, rectilinear basin that lies on the northern edge of the Aleutian Ridge and is aligned with the arcuate chain of active volcanoes on the ridge crest. The depression appears to be a volcanic-tectonic feature, which began to form in Late Tertiary time and which is still forming. It is a graben formed by extensional rifting and accompanied by contemporaneous volcanism on the Aleutian Ridge. Subsidence rates for the depression are estimated at 20-70 cm/1,000 years. Sediments in the depression are 300 m thick and are probably pelagic and turbidite deposits of Pleistocene age. The turbidites were apparently derived from the plateau area of the Aleutian Ridge surrounding the depression. Older sediments on the northern slope of the Aleutian Ridge have a maximum thickness of 550 m and are deformed and slumped toward the Bering Sea. These sediments are postulated to overlie a mid-flank terrace on the northern Aleutian Ridge that titled to the north during the formation of Buldir Depression. ?? 1970.

Intraplate compressional deformation in West-Congo and the Congo basin: related to ridge-puch from the South Atlantic spreading ridge?

NASA Astrophysics Data System (ADS)

Delvaux, Damien; Everaerts, Michel; Kongota Isasi, Elvis; Ganza Bamulezi, Gloire

2016-04-01

After the break-up and separation of South America from Africa and the initiation of the South-Atlantic mid-oceanic ridge in the Albian, at about 120 Ma, ridge-push forces started to build-up in the oceanic lithosphere and were transmitted to the adjacent continental plates. This is particularly well expressed in the passive margin and continental interior of Central Africa. According to the relations of Wiens and Stein (1985) between ridge-push forces and basal drag in function of the lithospheric age of oceanic plates, the deviatoric stress reaches a compressional maximum between 50 and 100, Ma after the initiation of the spreading ridge, so broadly corresponding to the Paleocene in this case (~70-20 Ma). Earthquake focal mechanism data show that the West-Congo margin and a large part of the Congo basin are still currently under compressional stresses with an horizontal compression parallel to the direction of the active transform fracture zones. We studied the fracture network along the Congo River in Kinshasa and Brazzaville which affect Cambrian sandstones and probably also the late Cretaceous-Paleocene sediments. Their brittle tectonic evolution is compatible with the buildup of ridge-push forces related to the South-Atlantic opening. Further inland, low-angle reverse faults are found affecting Jurassic to Middle Cretaceous cores from the Samba borehole in the Congo basin and strike-slip movements are recorded as a second brittle phase in the Permian cores of the Dekese well, at the southern margin of the Congo basin. An analysis of the topography and river network of the Congo basin show the development of low-amplitude (50-100 m) long wavelengths (100-300 km) undulations that can be interpreted as lithospheric buckling in response to the compressional intraplate stress field generated by the Mid-Atlantic ridge-push. Wiens, D.A., Stein, S., 1985. Implications of oceanic intraplate seismicity for plate stresses, driving forces and theology. Tectonophysics

Global Models of Ridge-Push Force, Geoid, and Lithospheric Strength of Oceanic plates

NASA Astrophysics Data System (ADS)

Mahatsente, Rezene

2017-12-01

An understanding of the transmission of ridge-push related stresses in the interior of oceanic plates is important because ridge-push force is one of the principal forces driving plate motion. Here, I assess the transmission of ridge-push related stresses in oceanic plates by comparing the magnitude of the ridge-push force to the integrated strength of oceanic plates. The strength is determined based on plate cooling and rheological models. The strength analysis includes low-temperature plasticity (LTP) in the upper mantle and assumes a range of possible tectonic conditions and rheology in the plates. The ridge-push force has been derived from the thermal state of oceanic lithosphere, seafloor depth and crustal age data. The results of modeling show that the transmission of ridge-push related stresses in oceanic plates mainly depends on rheology and predominant tectonic conditions. If a lithosphere has dry rheology, the estimated strength is higher than the ridge-push force at all ages for compressional tectonics and at old ages (>75 Ma) for extension. Therefore, under such conditions, oceanic plates may not respond to ridge-push force by intraplate deformation. Instead, the plates may transmit the ridge-push related stress in their interior. For a wet rheology, however, the strength of young lithosphere (<75 Ma) is much less than the ridge-push force for both compressional and extensional tectonics. In this case, the ridge-push related stress may dissipate in the interior of oceanic plates and diffuses by intraplate deformation. The state of stress within a plate depends on the balance of far-field and intraplate forces.

60 Years of Great Science (Oak Ridge National Laboratory)

DOE R&D Accomplishments Database

2003-01-01

This issue of Oak Ridge National Laboratory Review (vol. 36, issue 1) highlights Oak Ridge National Laboratory's contributions in more than 30 areas of research and related activities during the past 60 years and provides glimpses of current activities that are carrying on this heritage.

Community-Wide Education Outreach for the Ridge2000 Research Program

NASA Astrophysics Data System (ADS)

Goehring, E.

2004-12-01

Ridge2000 is a multidisciplinary NSF sponsored research initiative to explore Earth's spreading ridge system as an integrated whole. The Ridge2000 community is comprised of scientists from universities and research institutions across the country. Building on existing exemplary outreach efforts (e.g., REVEL, Dive&Discover, Volcanoes of the Deep Sea IMAX), Ridge2000 education outreach has begun to develop community-wide education offerings - programs to which Ridge2000 scientists and others may contribute. Community-wide efforts offer the advantages of serving larger audiences of scientists as well as educators and students and providing avenues for scientists interested in education outreach but with limited time or experience. Coordination of researchers' educational efforts also better leverages the resources of the funding agency - NSF. Here we discuss an exciting Ridge2000 pilot program called SEAS - Student Experiments At Sea. SEAS is a web-based program for middle and high school students to learn science by doing science. SEAS students study the exciting, relatively unexplored world of hydrothermal vents and learn to ask questions about this environment just as researchers do. SEAS goes beyond "follow-along" outreach by inviting students to participate in research through formal proposal and report competitions. The program was concept-tested during the 2003-2004 academic year, with 14 pilot teachers and approximately 800 students. Five student experiments were conducted at sea, with data posted to the website during the cruise. Student reports as well as scientist comments are posted there as well (http://www.ridge2000.org/SEAS/). It was an exciting year! Over 20 Ridge2000 scientists contributed their time and expertise to the SEAS program in its first year. Scientists are invited to contribute in a variety of ways, all of which help satisfy the requirement's of NSF's Broader Impacts Criterion. They may help develop curriculum topics, consult on

Formation and Elimination of Transform Faults on the Reykjanes Ridge

NASA Astrophysics Data System (ADS)

Martinez, Fernando; Hey, Richard

2017-04-01

The Reykjanes Ridge is a type-setting for examining processes that form and eliminate transform faults because it has undergone these events systematically within the Iceland gradient in hot-spot influence. A Paleogene change in plate motion led to the abrupt segmentation of the originally linear axis into a stair-step ridge-transform configuration. Its subsequent evolution diachronously and systematically eliminated the just-formed offsets re-establishing the original linear geometry of the ridge over the mantle, although now spreading obliquely. During segmented stages accreted crust was thinner and during unsegmented stages southward pointing V-shaped crustal ridges formed. Although mantle plume effects have been invoked to explain the changes in segmentation and crustal features, we propose that plate boundary processes can account for these changes [Martinez & Hey, EPSL, 2017]. Fragmentation of the axis was a mechanical effect of an abrupt change in plate opening direction, as observed in other areas, and did not require mantle plume temperature changes. Reassembly of the fragmented axis to its original linear configuration was controlled by a deep damp melting regime that persisted in a linear configuration following the abrupt change in opening direction. Whereas the shallow and stronger mantle of the dry melting regime broke up into a segmented plate boundary, the persistent deep linear damp melting regime guided reassembly of the ridge axis back to its original configuration by inducing asymmetric spreading of individual ridge segments. Effects of segmentation on mantle upwelling explain crustal thickness changes between segmented and unsegmented phases of spreading without mantle temperature changes. Buoyant upwelling instabilities propagate along the long linear deep melting regime driven by regional gradients in mantle properties away from Iceland. Once segmentation is eliminated, these propagating upwelling instabilities lead to crustal thickness

The Effects of Aseismic Ridge Collision on Upper Plate Deformation: Cocos Ridge Collision and Deformation of the Western Caribbean

NASA Astrophysics Data System (ADS)

La Femina, P. C.; Govers, R. M. A.; Ruiz, G.; Geirsson, H.; Camacho, E.; Mora-Paez, H.

2015-12-01

The collision of the Panamanian isthmus with northwestern South America is thought to have initiated as early as Oligocene - Miocene time (23-25 Ma) based on geologic and geophysical data and paleogeographic reconstructions. This collision was driven by eastward-directed subduction beneath northwestern South America. Cocos - Caribbean convergence along the Middle America Trench, and Nazca - Caribbean oblique convergence along the South Panama Deformed Belt have resulted in complex deformation of the southwestern Caribbean since Miocene - Pliocene time. Subduction and collision of the aseismic Cocos Ridge is thought to have initiated <3.5 Ma and has been linked to: 1) late Miocene-Pliocene cessation of volcanism and uplift of the Cordillera de Talamanca, Costa Rica; 2) Quaternary migration of the volcanic arc toward the back-arc in Costa Rica; 3) Quaternary to present deformation within the Central Costa Rica Deformed Belt; 4) Quaternary to present shortening across the fore-arc Fila Costeña fold and thrust belt and back-arc North Panama Deformed Belt (NPDB); 5) Quaternary to present outer fore-arc uplift of Nicoya Peninsula above the seamount domain, and the Osa and Burica peninsulas above the ridge; and 6) Pleistocene to present northwestward motion of the Central American Fore Arc (CAFA) and northeastward motion of the Panama Region. We investigate the geodynamic effects of Cocos Ridge collision on motion of the Panama Region with a new geodynamic model. The model is compared to a new 1993-2015 GPS-derived three-dimensional velocity field for the western Caribbean and northwestern South America. Specifically, we test the hypotheses that the Cocos Ridge is the main driver for upper plate deformation in the western Caribbean. Our models indicate that Cocos Ridge collision drives northwest-directed motion of the CAFA and the northeast-directed motion of the Panama Region. The Panama Region is driven into the Caribbean across the NPDB and into northwestern South

East Pacific Rise at lat 19°S: Evidence for a recent ridge jump

NASA Astrophysics Data System (ADS)

Morton, Janet L.; Ballard, Robert D.

1986-02-01

A detailed ANGUS (Acoustically Navigated Geological Undersea Surveyor) photographic and bathymetric survey of the East Pacific Rise (EPR) near lat 19°S reveals a small jump of the ridge axis to the west. The axial block in this region consists of two parallel ridges 3 km apart and separated by a 200-m-deep valley. South of lat 19°06‧S the plate boundary is a single, narrow (<1 km) ridge. The eastern ridge near lat 19°S is shallower than the western ridge and is morphologically a continuation of the narrow, active ridge axis to the south. ANGUS photographs along both ridges and in the intervening valley, however, show that the western ridge is the currently active plate boundary. We suggest that spreading shifted westward from the eastern ridge to its present position within the past 40 000 yr. The EPR in the general region has been characterized by asymmetric spreading for the past 2.4 m.y. The sense of the ridge jump near lat 19°S is consistent with the asymmetric spreading, which could have been produced by a series of such jumps.

Sedimentary and structural patterns on the northern Santa Rosa-Cortes Ridge, southern California

USGS Publications Warehouse

Field, M.E.; Richmond, W.C.

1980-01-01

The Santa Rosa-Cortes Ridge is an 1800 m high, 180 km long feature lying approximately 90 km off the coast of southern California and directly south of the northern group of Channel Islands. Geophysical profiling and sampling cruises to the northern part of the ridge, an area of recent and future lease sales for petroleum development, provide a strong data base for interpretation of structural and sedimentary patterns and their relation to potential geologic hazards. The northern part of the ridge is a complexly folded and faulted northwest-trending anticlinorium composed mostly of lower and middle Miocene shale and mudstone. Erosional remnants of upper Miocene and Pliocene rocks unconformably overlie highly folded pre-upper Miocene strata. The major structure of the ridge developed almost continuously from Oligocene or early Miocene time to the end of the Tertiary; many small folds formed between post-late Miocene and pre-late Pleistocene time. Numerous small faults cut the rocks on the ridge top. Faults cut basement rocks on the west side of the ridge along the Ferrelo fault zone. Published data on historical epicenters and evidence of offsets on the seafloor from seismic reflection and side-scan profiles, including limited evidence of possible strike-slip movement along fault traces, indicate that the northern Santa Rosa-Cortes Ridge is tectonically active. The crest of the ridge was truncated as the result of repeated sea-level fluctuations in the Quaternary. A thin veneer of unconsolidated medium to fine sand, less than 3 m thick, mantles most of the ridge; locally in topographically low areas and on the upper flanks of the ridge, thickness exceeds 20 m. The meager sediment cover, coupled with available evidence of relatively strong currents flowing across the ridge top, indicate that the ridge is an area of nondeposition or winnowing of fine sediments. Modern sediments become thicker and finer-grained from the ridge top to the ridge flanks, suggesting active

A very large dew and rain ridge collector in the Kutch area (Gujarat, India)

NASA Astrophysics Data System (ADS)

Sharan, G.; Clus, O.; Singh, S.; Muselli, M.; Beysens, D.

2011-07-01

SummaryThe world's largest dew and rain collecting system, comprised of ridge-and-trough modules, was constructed in March 2006 at Panandhro in the semi-arid area of Kutch (NW India). The main goals were (i) to collect dew on a scale that could be beneficial to the local population (ii) to determine the efficiency of this new module shape, (iii) to determine whether results obtained from small measurement condensers can be projected to large condensers, (iv) to apply a computational fluid dynamic simulation to improve the condenser set-up. Preliminary studies performed with four standard plane condensers of 1 m 2 surface area, inclined 30° from horizontal, identified Panandhro as a promising site. The cumulated dew water during 192 days was 12.6 mm with a maximum of 0.556 mm/night. A large dew condenser (850 m 2 net total surface) was designed with 10 ridge-and-trough modules. The ridges are trapezoidal, 33 m long, 0.5 m wide at the top, 2.2 m wide at the base and sloping 30° from horizontal. The depth of the troughs between the ridges is 0.5 m. A 2.5 cm thick polystyrene foam rests on the surface as insulation with a radiative foil on top (similar to that developed by OPUR, see www.opur.fr). Numerical simulations using the computational fluid dynamic software PHOENICS were performed. The most profitable orientation was with the condenser oriented back to the wind direction, a configuration that lowers the wind velocity near the foil due to the combination of free convection and wind recirculation flows. A comparison of water yields over one year of measurements between four 1 m 2 plane condensers and a 850 m 2 ridge condenser showed a 42% lower yield on the large condenser. The difference is attributed mainly to folds in the plastic foil allowing water to fill the central ridge, thus decreasing radiative cooling. The output for 2007 was 6545 L, corresponding to 7.7 mm/day on average. The largest event was 251.4 L/night (0.3 mm). Such a condenser can also collect

Magnetic Anomalies over the Mid-Atlantic Ridge near 27{degrees}N.

PubMed

Phillips, J D

1967-08-25

Ten magnetic profiles across the mid-Atlantic ridge near 27 degrees N show trends that are parallel to the ridge axis and symmetrical about the ridge axis. The configuration of magnetic bodies that could account for the pattern supports the Vine and Matthews hypothesis for the origin of magnetic anomalies over oceanic ridges. A polarity-reversal time scale inferred from models for sea-floor spreading in the Pacific-Antarctic ridge and radiometrically dated reversals of the geomagnetic field indicates a spreading rate of 1.25 centimeters per year during the last 6 million years and a rate of 1.65 centimeters per year between 6 and 10 million years ago. A similar analysis of more limited data over the mid-Atlantic ridge near 22 degrees N also indicates a change in the spreading rate. Here a rate of 1.4 centimeters per year appears to have been in effect during the last 5 million years; between 5 and 9 million years ago, an increased rate of 1.7 centimeters per year is indicated. The time of occurrence and relative magnitude of these changes in the spreading rate, about 5 to 6 million years ago and 18 to 27 percent, respectively, accords with the spreading rate change implied for the Juan de Fuca ridge in the northeast Pacific.

The Sagatu Ridge dike swarm, Ethiopian rift margin. [tectonic evolution

NASA Technical Reports Server (NTRS)

Mohr, P. A.; Potter, E. C.

1976-01-01

A swarm of dikes forms the core of the Sagatu Ridge, a 70-km-long topographic feature elevated to more than 4000 m above sea level and 1500 m above the level of the Eastern (Somalian) plateau. The ridge trends NNE and lies about 50 km east of the northeasterly trending rift-valley margin. Intrusion of the dikes and buildup of the flood-lava pile, largely hawaiitic but with trachyte preponderant in the final stages, occurred during the late Pliocene-early Pleistocene and may have been contemporaneous with downwarping of the protorift trough to the west. The ensuing faulting that formed the present rift margin, however, bypassed the ridge. The peculiar situation and orientation of the Sagatu Ridge, and its temporary existence as a line of crustal extension and voluminous magmatism, are considered related to a powerful structural control by a major line of Precambrian crustal weakness, well exposed further south. Transverse rift structures of unknown type appear to have limited the development of the ridge to the north and south.

Extraction of lead and ridge characteristics from SAR images of sea ice

NASA Technical Reports Server (NTRS)

Vesecky, John F.; Smith, Martha P.; Samadani, Ramin

1990-01-01

Image-processing techniques for extracting the characteristics of lead and pressure ridge features in SAR images of sea ice are reported. The methods are applied to a SAR image of the Beaufort Sea collected from the Seasat satellite on October 3, 1978. Estimates of lead and ridge statistics are made, e.g., lead and ridge density (number of lead or ridge pixels per unit area of image) and the distribution of lead area and orientation as well as ridge length and orientation. The information derived is useful in both ice science and polar operations for such applications as albedo and heat and momentum transfer estimates, as well as ship routing and offshore engineering.

Mid-ocean-ridge seismicity reveals extreme types of ocean lithosphere.

PubMed

Schlindwein, Vera; Schmid, Florian

2016-07-14

Along ultraslow-spreading ridges, where oceanic tectonic plates drift very slowly apart, conductive cooling is thought to limit mantle melting and melt production has been inferred to be highly discontinuous. Along such spreading centres, long ridge sections without any igneous crust alternate with magmatic sections that host massive volcanoes capable of strong earthquakes. Hence melt supply, lithospheric composition and tectonic structure seem to vary considerably along the axis of the slowest-spreading ridges. However, owing to the lack of seismic data, the lithospheric structure of ultraslow ridges is poorly constrained. Here we describe the structure and accretion modes of two end-member types of oceanic lithosphere using a detailed seismicity survey along 390 kilometres of ultraslow-spreading ridge axis. We observe that amagmatic sections lack shallow seismicity in the upper 15 kilometres of the lithosphere, but unusually contain earthquakes down to depths of 35 kilometres. This observation implies a cold, thick lithosphere, with an upper aseismic zone that probably reflects substantial serpentinization. We find that regions of magmatic lithosphere thin dramatically under volcanic centres, and infer that the resulting topography of the lithosphere-asthenosphere boundary could allow along-axis melt flow, explaining the uneven crustal production at ultraslow-spreading ridges. The seismicity data indicate that alteration in ocean lithosphere may reach far deeper than previously thought, with important implications towards seafloor deformation and fluid circulation.

A seismically active section of the Southwest Indian Ridge

NASA Astrophysics Data System (ADS)

Wald, David J.; Wallace, Terry C.

1986-10-01

The section of the Southwest Indian Ocean Ridge west of the Prince Edward Fracture zone has a large ridge axis offset and a complicated ridge-transform morphology. We have determined the source mechanisms of transform earthquakes along this portion of the ridge from an inversion of long-period P and SH waveforms. The seismicity is characterized by anomalous faulting mechanisms, source complexity and an unexpectedly large seismic moment release. Several earthquakes with dip-slip components of faulting have been recognized on the central section of the Andrew Bain and 32° E transforms suggesting geometrical complexity along the transform. This region has experienced a Mw = 8.0 transform earthquake in 1942, yet we observe a seismic slip rate during the last 20 years that is still comparable to the predicted spreading rate (1.6 cm/yr). The calculated slip rate over a period of 60 years is three times greater than the expected rate of spreading.

Wrinkle ridges in the floor material of Kasei Valles, Mars: Nature and origin

NASA Technical Reports Server (NTRS)

Watters, Thomas R.; Craddock, Robert A.

1991-01-01

Wrinkle ridges on Mars occur almost exclusively in smooth plains material referred to as ridged plains. One of the largest contiguous units of ridged plains occurs on Lunae Planum on the eastern flank of the Tharsis rise. The eastern, western, and northern margins of the ridged plains of Lunae Planum suffered extensive erosion in early Amazonian channel-forming events. The most dramatic example of erosion in early Amazonian plains is in Kasei Valles. The nature an origin of the wrinkle ridges in the floor material of Kasei Valles are discussed.

75 FR 20859 - Temporary Concession Contract for Blue Ridge Parkway, NC/VA

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-21

... DEPARTMENT OF THE INTERIOR National Park Service Temporary Concession Contract for Blue Ridge... of temporary concession contract for Blue Ridge Parkway. SUMMARY: Pursuant to 36 CFR 51.24, public... for the conduct of certain visitor services within Blue Ridge Parkway, North Carolina and Virginia for...

Submarine sand ridges and sand waves in the eastern part of the China Sea

NASA Astrophysics Data System (ADS)

Wu, Ziyin; Li, Shoujun; Shang, Jihong; Zhou, Jieqiong; Zhao, Dineng; Liang, Yuyang

2016-04-01

Integrated with multi-beam and single-beam echo sounding data, as well as historical bathymetric data, submarine bathymetric maps of the eastern part of the China Sea, including the Bohai Sea, Huanghai Sea, and East China Sea, are constructed to systematically study submarine sand ridges and sand waves in the eastern part of the China Sea, combined with high-resolution seismic, sub-bottom profile and borehole data. Submarine sand ridges are extraordinarily developed in the eastern part of the China Sea, and 7 sand ridge areas can be divided from north to south, that is, the Laotieshan Channel sand ridge area in the Bohai Sea, the Korea Bay sand ridge area in the southern Huanghai Sea, the sand ridge area in the eastern Huanghai islands and the Huanghai Troughs, the Jianggang sand ridge area in the western Huanghai Sea, the sand ridge area in the East China Sea shelf, and the sand ridge and sand wave area in the Taiwan Strait and Taiwan Banks. The distribution area of the sand ridges and sand waves covers more than 450,000 km2, wherein ~10,000 km2 in the Bohai Bay, ~200,000 km2 in the Huanghai Sea, ~200,000 km2 in the East China Sea shelf, and ~40,000 km2 in the Taiwan Strait and Taiwan Banks, respectively. The great mass of sand ridges are distributed within water depth of 5-160 m, with a total length of over 160 km and a main width of 5-10 km. The inner structure of the sand ridges presents features of high-angle inclined beddings, with main lithology of sands, sand-mud alternations partly visible, and a small number of mud cores. Dating results indicate that the sand ridges in the eastern part of the China Sea are mainly developed in the Holocene. Sea-level variation dominates the sand ridge evolution in the eastern part of the China Sea since the LGM, and the sand ridges developed in the area of < 60m water depth are appeared in bad activity, meanwhile sand ridges with good activity are still developed in large scale.

Segmentation Control on Crustal Accretion: Insights From the Chile Ridge

NASA Astrophysics Data System (ADS)

Martinez, F.; Karsten, J. L.; Milman, M. S.; Klein, E. M.

2002-12-01

Controls on crustal accretion at mid-ocean ridges include spreading rate and mantle temperature and composition. Less studied is the effect of the segmentation geometry, although it has been known for some time that large offset transforms have significant effects on the extent of melting and lava compositions produced by ridges in their vicinity. The PANORAMA 4 expedition surveyed the Chile Ridge between 36°-43°S in order to examine the effects of ridge segmentation on crustal accretion. This section of the ridge is spreading uniformly at intermediate rates (~53 mm/yr) and rock sampling and regional data indicate a largely uniform mantle composition with no systematic changes in mantle thermal structure. Thus the segmentation geometry is the primary crustal accretion variable. The survey mapped and sampled 19 first order ridge segments and their transform offsets. The ridges range from 130 to 10 km in length with mapped transform offsets from 168 to 19 km. The segments primarily have axial valley morphology, with segments longer than ~65 km typically displaying central highs deepening toward segment ends. Mantle Bouguer anomalies (MBAs) show that these segments also have bulls eye lows associated with the central highs indicating thicker crust than at segment ends. Overall the mapped segments displays a trend of increasing depth and MBA, implying diminishing crustal production, with decreasing segment length and increasing transform offset. We examine the cause of this trend by modeling the mantle flow pattern generated by finite length ridge segments using the Phipps-Morgan and Forsyth (1988) algorithm. The results indicate that at a constant spreading rate mantle upwelling rates are greatest and extend deeper near the segment center, and that for segments that are significantly offset, upwelling rates decrease overall with decreasing segment length. The modeling implies that segmentation itself, even without cooling and lithospheric relief at transforms has a

Effects of Employing Ridge Regression in Structural Equation Models.

ERIC Educational Resources Information Center

McQuitty, Shaun

1997-01-01

LISREL 8 invokes a ridge option when maximum likelihood or generalized least squares are used to estimate a structural equation model with a nonpositive definite covariance or correlation matrix. Implications of the ridge option for model fit, parameter estimates, and standard errors are explored through two examples. (SLD)

900-m high gas plumes rising from marine sediments containing structure II hydrates at Vestnesa Ridge, offshore W-Svalbard

NASA Astrophysics Data System (ADS)

Smith, Andrew J.; Mienert, Jürgen; Bünz, Stefan; Greinert, Jens; Rasmussen, Tine L.

2013-04-01

We study an arctic sediment drift in ~1200 m water depth at Vestnesa Ridge, offshore western Svalbard. The ridge is spotted with pockmarks that range in size from a few meters to hundreds of meters in diameter and centimeters to tens of meters in height (e.g. Vogt et al., 1994). There is a strong negative-polarity seismic reflection below the ridge that is interpreted to record a negative impedance contrast marking the boundary between gas hydrate and water above and free gas and water below: it is the bottom-simulating reflector (BSR). Seismically transparent zones, interpreted as gas chimneys, extend from pockmarks at the seafloor to depths below the BSR (180-220 meters below the seafloor) (Bünz et al., 2012). Gas flares, gas hydrate, and methane-seep-specific biological communities (pogonphora and begiatoa bacterial mats) have been observed adjacent to pockmarks at the ridge (Bünz et al., 2012). We present new single-beam echosounding data that were acquired during 2010 and 2012 cruises on the R/V Helmer Hanssen at Vestnesa Ridge using a Simrad EK60 system that operates at frequencies of 18 and 38 kHz. During both cruises which lasted 3-5 days, we detected continuous bubble release from 4 separate pockmarks in 2010 and 6 separate pockmarks in 2012. There were no noticeable, short-term (hourly or daily) variations in the bubble release from the pockmarks, indicating that the venting from the pockmarks does not undergo rapid changes. Plumes from the pockmarks rise between 875 to 925m above the seafloor to a final water depth of 325 to 275m, respectively. This depth is in excellent agreement with the top of the hydrate stability zone (275 meters below sea level) for the gas composition of hydrate sampled at the ridge (96.31% C1; 3.36% C2; 0.21% C3; 0.11% IC4; 0.01% NC4). This suggests that hydrate skins are forming around the gas bubbles, inhibiting the dissolution of gas, and allowing the bubbles to rise to such great heights in the water column. Our results

Evaluation of Calendar Year 1997 Groundwater and Surface Water Quality Data For The Chestnut Ridge Hydrogeologic Regime At The U.S. Department of Energy Y-12 Plant, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, S.B.

1998-09-01

This report presents an evaluation of the groundwater monitoring data obtained in the Chestnut Ridge Hydrogeologic Regime (Chestnut Ridge Regime) during calendar year (CY) 1997. The Chestnut Ridge Regime encompasses a section of Chestnut Ridge bordered by the U.S. Department of Energy (DOE) Y-12 Plant in Bear Creek Valley (BCV) to the north, Scarboro Road to the eas~ Bethel Valley Road to the south, and an unnamed drainage basin southwest of the Y-12 Plant (Figure 1). Groundwater quality monitoring is performed at hazardous and nonhazardous waste management facilities in the regime under the auspices of the Y-12 Plant Groundwater Protectionmore » Program (GWPP). The CY 1997 monitoring data are presented in Calendar Year 1997 Annual Groundwater Monitoring Report for the Chestnut Ridge Hydrogeolo~"c Regime at the US. Department of Energy Y-12 Plant, Oak Ridge, Tennessee (MA Technical Services, Inc. 1998), which also presents results of site-specific monitoring data evaluations required under the Resource Conservation and Recovery Act (RCIL4) post-closure permit (PCP) for the Chestnut Ridge Regime« less

Circulation in the region of the Reykjanes Ridge in June-July 2015

NASA Astrophysics Data System (ADS)

Tillys, Petit; Herle, Mercier; Virginie, Thierry

2017-04-01

The Reykjanes Ridge is a major topographic feature of the North-Atlantic Ocean lying south of Iceland that strongly influences the pathways of the upper and lower limbs of the meridional overturning cell. The circulation in the vicinity of the Reykjanes Ridge is anticyclonic and characterized by a southwestward flow (the East Reykjanes Ridge Current, ERRC) along the eastern flank and a northeastward flow (the Irminger Current, IC) along the western flank. Even if it is admitted that the ERRC feeds the IC through a cross-ridge flow, details and magnitude of this circulation remain unclear. In this study, the circulation in the region of the Reykjanes Ridge was investigated based on ADCP and CTDO2 measurements carried out from the R/V Thalassa during the RREX cruise, which provided a snapshot of the water mass distribution and circulation during summer 2015. One hydrographic section followed the top of the Reykjanes Ridge between Iceland and 50˚ N and three other sections were carried out perpendicularly to the ridge at 62˚ N, 58.5˚ N and 56˚ N. Geostrophic transports were estimated by combining ADCP and hydrographic data. Those observations were used to provide an estimate of the circulation around the Ridge and to discuss the meridional evolutions of the ERRC and IC transports along the Ridge and their connection to the cross-Ridge flows. The section along the top of the Reykjanes Ridge allowed us to describe the cross ridge exchanges. A westward flow crossed the Ridge between Iceland and 53˚ N. Its top to bottom integrated transport was estimated at 17.7 Sv. Two main passages were identified for the westward crossing. A first passage is located near 57˚ N (Bight Fracture Zone, BFZ) in agreement with previous studies. More surprisingly, a second passage is located near 59˚ N. The top-to-bottom transports of those two main flows were estimated at 6.5 and 8 Sv respectively. The IC and ERRC top-to-bottom integrated transports were maximum at 58.5˚ N and

Martian Wrinkle Ridge Topography: Evidence for Subsurface Faults from MOLA

NASA Technical Reports Server (NTRS)

Golombek, M. P.; Anderson, F. S.; Zuber, M. T.

2000-01-01

Mars Orbiter Laser Altimeter (MOLA) profiles across wrinkle ridges are characterized by plains surfaces at different elevations on either side that appear best explained by subsurface thrust faults that underlie the ridges and produce the offset.

Testing models for the formation of the equatorial ridge on Iapetus via crater counting

NASA Astrophysics Data System (ADS)

Damptz, Amanda L.; Dombard, Andrew J.; Kirchoff, Michelle R.

2018-03-01

Iapetus's equatorial ridge, visible in global views of the moon, is unique in the Solar System. The formation of this feature is likely attributed to a key event in the evolution of Iapetus, and various models have been proposed as the source of the ridge. By surveying imagery from the Cassini and Voyager missions, this study aims to compile a database of the impact crater population on and around Iapetus's equatorial ridge, assess the relative age of the ridge from differences in cratering between on ridge and off ridge, and test the various models of ridge formation. This work presents a database that contains 7748 craters ranging from 0.83 km to 591 km in diameter. The database includes the study area in which the crater is located, the latitude and longitude of the crater, the major and minor axis lengths, and the azimuthal angle of orientation of the major axis. Analysis of crater orientation over the entire study area reveals that there is no preference for long-axis orientation, particularly in the area with the highest resolution. Comparison of the crater size-frequency distributions show that the crater distribution on the ridge appears to be depleted in craters larger than 16 km with an abruptly enhanced crater population less than 16 km in diameter up to saturation. One possible interpretation is that the ridge is a relatively younger surface with an enhanced small impactor population. Finally, the compiled results are used to examine each ridge formation hypothesis. Based on these results, a model of ridge formation via a tidally disrupted sub-satellite appears most consistent with our interpretation of a younger ridge with an enhanced small impactor population.

Coral-gravel storm ridges: examples from the tropical Pacific and Caribbean

USGS Publications Warehouse

Richmond, Bruce M.; Morton, Robert A.

2007-01-01

Extreme storms in reef environments have long been recognized as a mechanism for depositing ridges of reef-derived coarse clastic sediment. This study revisits the storm ridges formed by Tropical Cyclone Bebe on Funafuti, Tuvalu and Tropical Cyclone Ofa on Upolu, Western Samoa in the South Pacific, and Hurricane Lenny on Bonaire, Netherlands Antilles in the Caribbean. Ridge characteristics produced by these storms include: heights of 1–4 m, widths of 8–50 m, and lengths up to 18 km. The ridges tend to be higher and steeper on their landward margins than on their seaward margins and are composed mostly of re-worked coral rubble derived from reef front settings with smaller amounts of fresh broken coral (5–30%). Characteristics of these modern gravel storm ridges can be used to help identify ancient storm deposits and to differentiate between other coarse-grained deposits such as those created by tsunamis.

The crustal structure of the Cocos ridge off Costa Rica

NASA Astrophysics Data System (ADS)

Walther, Christian H. E.

2003-03-01

The submarine Cocos ridge in the northwestern Panamá basin, a bathymetric feature more than 1000-km long and 250-500 km broad, is about 2 km shallower than the adjacent basin. It is generally interpreted as the trace of the Galápagos hot spot. Two 127- and 260-km long seismic wide-angle sections were recorded along and across this ridge, offshore the Osa peninsula, Costa Rica. Crustal thickening is seen everywhere along the sections. On the northwestern outer ridge flank, increased thickness is exclusively attributed to the upper crust and expressed by 2-km thick flow basalts. The Quepos plateau caps the upper crust in this area. Toward the center of the Cocos ridge, the Moho deepens from 11-12 to 21 km depth and crustal thickening is almost entirely attributed to the lower crust which makes up 80% of the crust and is three times the thickness of normal oceanic lower crust. It is homogeneously structured and the velocities which range from 6.5 km/s at the top to 7.35 km/s at the base are comparable to normal lower crust under these depth conditions and suggest no differences to a gabbroic rock composition. Similarities to the crustal velocity structure of Iceland, central Kerguelen plateau, and Broken ridge are consistent with a formation of this 13-15 Ma old Cocos ridge segment by excessive magmatism in a near-plate boundary setting.

Seismic imaging of the Formosa Ridge cold seep site offshore of southwestern Taiwan

NASA Astrophysics Data System (ADS)

Hsu, Ho-Han; Liu, Char-Shine; Morita, Sumito; Tu, Shu-Lin; Lin, Saulwood; Machiyama, Hideaki; Azuma, Wataru; Ku, Chia-Yen; Chen, Song-Chuen

2017-12-01

Multi-scale reflection seismic data, from deep-penetration to high-resolution, have been analyzed and integrated with near-surface geophysical and geochemical data to investigate the structures and gas hydrate system of the Formosa Ridge offshore of southwestern Taiwan. In 2007, dense and large chemosynthetic communities were discovered on top of the Formosa Ridge at water depth of 1125 m by the ROV Hyper-Dolphin. A continuous and strong BSR has been observed on seismic profiles from 300 to 500 ms two-way-travel-time below the seafloor of this ridge. Sedimentary strata of the Formosa Ridge are generally flat lying which suggests that this ridge was formed by submarine erosion processes of down-slope canyon development. In addition, some sediment waves and mass wasting features are present on the ridge. Beneath the cold seep site, a vertical blanking zone, or seismic chimney, is clearly observed on seismic profiles, and it is interpreted to be a fluid conduit. A thick low velocity zone beneath BSR suggests the presence of a gas reservoir there. This "gas reservoir" is shallower than the surrounding canyon floors along the ridge; therefore as warm methane-rich fluids inside the ridge migrate upward, sulfate carried by cold sea water can flow into the fluid system from both flanks of the ridge. This process may drive a fluid circulation system and the active cold seep site which emits both hydrogen sulfide and methane to feed the chemosynthetic communities.

Seismic and Tectonic Monitoring of the Endeavour Ridge Segment—Recent and Future Expansion of Ocean Networks Canada's NEPTUNE Observatory on the Juan de Fuca Ridge

NASA Astrophysics Data System (ADS)

Heesemann, M.; Davis, E. E.; Scherwath, M.; Kao, H.; Coogan, L. A.; Rogers, G. C.; Wilcock, W. S. D.

2016-12-01

Ocean Networks Canada's (ONC) NEPTUNE observatory provides real-time access to sensors on the Endeavour Ridge Segment (Endeavour)—a focus site on the Juan de Fuca Ridge System that is complementary to one on Axial Volcano that is connected through the Ocean Observatories Initiative's (OOI) Cabled Array. While first instruments (including cameras, a short-period seismometer, and vent monitoring instruments) installed at the Main Endeavour vent field have been sending data since summer 2010, unreliable extension cables precluded continuous time-series from other nearby locations. With the successful installation of four extension cables, the summer of 2016 represents an important milestone in the instrumentation of the Endeavour Ridge Segment. We will present an overview of the data that are available in near real-time from Endeavour and new instrumentation that is scheduled for installation in 2017, and highlight first results derived from the new seismo-tectonic network now in operation. This network consists of three short-period seismometers (Mothra Field, Main Endeavour Field, Regional Circulation North), one broadband seismometer (western Ridge Flank), and four bottom pressure recorders (Mothra Field, Regional Circulation South, Main Endeavour Field, western Ridge Flank). The pressure recorders will provide both seismic and oceanographic data, and allow to measure differential vertical motion among the sites. We will also highlight a new technique to determine long period seafloor deformation from broadband seismometer mass-position measurements, using data from the Ridge Flank instrument as an example.

Ridging and strength in modeling the thickness distribution of Arctic sea ice

NASA Astrophysics Data System (ADS)

Flato, Gregory M.; Hibler, William D.

1995-09-01

A theory describing evolution of the ice thickness distribution (the probability density of ice thickness) was proposed by Thorndike et al. (1975) and has been used in several sea ice models. The advantage of this theory over the widely used two-level formulation is that it treats ridging explicitly as a redistribution of ice thickness, and ice strength as a function of energy losses incurred by ridge formation. However, the parameterization of these processes remains rather speculative and largely untested, and so our purpose here is to explore these parameterizations using a numerical model based on this theory. The model uses a 160-km resolution grid of the Arctic and 7 years of observed atmospheric forcing data (1979-1985). Monthly oceanic heat flux and current fields are obtained from a 40-km resolution coupled ice-ocean model run separately with the same forcing. By requiring the computed monthly mean ice drift to have the same magnitude as observed buoy drift, we estimate the primary strength parameter: the ratio of total to potential energy change during ridging. This ratio depends on the value of other parameters; however, the standard case has a ratio of 17 which is within the range estimated by Hopkins (1994) in simulations of individual ridging events. The effects of ridge redistribution and shear ridging parameters are illustrated by a series of sensitivity studies and comparisons between observed and modeled ice thickness distributions and ridge statistics. In addition, these comparisons highlight the following shortcomings of the thickness distribution theory as it is presently implemented: first, the process of first-year to multiyear ridge consolidation is ignored; and second, the observed preferential melt of thick ridged ice is not reproduced.

Micro-imager View: Layers in 'Vera Rubin Ridge,' Mars

NASA Image and Video Library

2017-09-13

This view of "Vera Rubin Ridge" from the Chemistry and Camera (ChemCam) instrument on NASA's Curiosity Mars rover shows multiple sedimentary layers and fracture-filling deposits of minerals. Buried layers of what is now a ridge became fractured, and the fractures were filled with mineral deposits precipitated from underground fluids that moved through the fractures. ChemCam's telescopic Remote Micro-Imager took the 10 component images of this mosaic on July 3, 2017, during the 1,745th Martian day, or sol, of Curiosity's work on Mars. The camera was about 377 feet (115 meters) away from the pictured portion of the ridge. The rover's location at the time, shown in a Sol 1741 traverse map, was west of the place where it began its ascent up the ridge about two months later. The scale bar at lower right indicates how wide a feature 9 inches (22.8 centimeters) in width would look in the middle portion of the scene. https://photojournal.jpl.nasa.gov/catalog/PIA21852

Oak Ridge National Laboratory Core Competencies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberto, J.B.; Anderson, T.D.; Berven, B.A.

1994-12-01

A core competency is a distinguishing integration of capabilities which enables an organization to deliver mission results. Core competencies represent the collective learning of an organization and provide the capacity to perform present and future missions. Core competencies are distinguishing characteristics which offer comparative advantage and are difficult to reproduce. They exhibit customer focus, mission relevance, and vertical integration from research through applications. They are demonstrable by metrics such as level of investment, uniqueness of facilities and expertise, and national impact. The Oak Ridge National Laboratory (ORNL) has identified four core competencies which satisfy the above criteria. Each core competencymore » represents an annual investment of at least $100M and is characterized by an integration of Laboratory technical foundations in physical, chemical, and materials sciences; biological, environmental, and social sciences; engineering sciences; and computational sciences and informatics. The ability to integrate broad technical foundations to develop and sustain core competencies in support of national R&D goals is a distinguishing strength of the national laboratories. The ORNL core competencies are: 9 Energy Production and End-Use Technologies o Biological and Environmental Sciences and Technology o Advanced Materials Synthesis, Processing, and Characterization & Neutron-Based Science and Technology. The distinguishing characteristics of each ORNL core competency are described. In addition, written material is provided for two emerging competencies: Manufacturing Technologies and Computational Science and Advanced Computing. Distinguishing institutional competencies in the Development and Operation of National Research Facilities, R&D Integration and Partnerships, Technology Transfer, and Science Education are also described. Finally, financial data for the ORNL core competencies are summarized in the appendices.« less

Ridges and Flows

NASA Image and Video Library

2015-11-16

Located southwest of Olympus Mons, this image captured by NASA 2001 Mars Odyssey spacecraft shows part of a complex region that has undergone several geologic processes. The hills have been modified by wind, creating narrow ridges, and then the entire region has been covered with volcanic flows from Olympus Mons. Orbit Number: 60744 Latitude: 13.4267 Longitude: 220.554 Instrument: VIS Captured: 2015-08-24 10:00 http://photojournal.jpl.nasa.gov/catalog/PIA20093

Building of tropical beach ridges, northeastern Queensland, Australia: Cyclone inundation and aeolian decoration

NASA Astrophysics Data System (ADS)

Tamura, Toru; Nicholas, William; Brooke, Brendan; Oliver, Thomas

2016-04-01

Processes associated with tropical cyclones are thought responsible for building coarse sand beach ridges along the northeastern Queensland coast, Australia. While these ridges are expected to be geological records of the past cyclone, they question the general consensus of the aeolian genesis of sandy beach ridges. To explore the ridge-forming process, we carried out the GPR survey, auger drilling, pit excavation, grain-size analysis, and OSL dating for coarse sand beach ridges at the Cowley Beach, northeastern Queensland. The Cowley Beach is a mesotidal beach characterized by a low-tide terrace and steep beach face. Ten beach ridges are recognized along the survey transect that extends 700 m inland from the shore. 37 OSL ages are younger seawards, indicating the seaward accretion of the ridge sequence over the last 2700 years. The highest ridge is +5.1 m high above AHD (Australian Height Datum). Two GPR units are bounded by a groundwater surface at c. +1.5 m AHD. The upper unit is characterized by horizontal to hummocky reflectors punctuated by seaward dipping truncation surfaces. These reflectors in places form dome-like structure that appears to be the nucleus of a beach ridge. The shape and level (+2.5 m AHD) of the dome are similar to those of the present swash berm. The lower unit shows a sequence of reflectors that dip at an angle of present beach face. The sequence is dissected by truncation surfaces, some of which are continuous to those in the upper unit. Coarse sand mainly forms beach ridge deposits below +4.0 m AHD, while a few higher ridges have an upward fining layer composed of medium sand above +4.0 m, which is finer than aeolian ripples found on the backshore during the survey. In addition, pumice gravel horizons underlie the examined ridge crests. The sequence of seaward dipping reflectors indicates that the Cowley Beach, like other many sandy beaches, has prograded during onshore sand accretion by fairweather waves and has been eroded by storms

Holifield Heavy-Ion Research Facility at Oak Ridge

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, C.M.

1977-01-01

A new heavy-ion accelerator facility is now under construction at the Oak Ridge National Laboratory. A brief description of the scope and schedule of this project is given, and the new large tandem accelerator, which will be a major element of the facility is discussed in some detail. Several studies which have been made or are in progress in Oak Ridge in preparation for operation of the tandem accelerator are briefly described.

Mid Ocean Ridge Processes at Very Low Melt Supply : Submersible Exploration of Smooth Ultramafic Seafloor at the Southwest Indian Ridge, 64 degree E

NASA Astrophysics Data System (ADS)

Cannat, M.; Agrinier, P.; Bickert, M.; Brunelli, D.; Hamelin, C.; Lecoeuvre, A.; Lie Onstad, S.; Maia, M.; Prampolini, M.; Rouméjon, S.; Vitale Brovarone, A.; Besançon, S.; Assaoui, E. M.

2017-12-01

Mid-ocean ridges are the Earth's most extensive and active volcanic chains. They are also, particularly at slow spreading rates, rift zones, where plate divergence is in part accommodated by faults. Large offset normal faults, also called detachments, are characteristic of slow-spreading ridges, where they account for the widespread emplacement of mantle-derived rocks at the seafloor. In most cases, these detachments occur together with ridge magmatism, with melt injection and faulting interacting to shape the newly formed oceanic lithosphere. Here, we seek to better understand these interactions and their effects on oceanic accretion by studying the end-member case of a ridge where magmatism is locally almost absent. The portion of the Southwest Indian ridge we are studying has an overal low melt supply, focused to discrete axial volcanoes, leaving almost zero melt to intervening sections of the axial valley. One of these nearly amagmatic section of the ridge, located at 64°E, has been the focus of several past cruises (sampling, mapping and seismic experiments). Here we report on the most recent cruise to the area (RV Pourquoi Pas? with ROV Victor; dec-jan 2017), during which we performed high resolution mapping, submersible exploration and sampling of the ultramafic seafloor and of sparse volcanic formations. Our findings are consistent with the flip-flop detachment hypothesis proposed for this area by Sauter et al. (Nature Geosciences, 2013; ultramafic seafloor forming in the footwall of successive detachment faults, each cutting into the footwall of the previous fault, with an opposite polarity). Our observations also document the extent and geometry of deformation in the footwall of a young axial detachment, the role of mass-wasting for the evolution of this detachment, and provide spectacular evidence for serpentinization-related hydrothermal circulation and for spatial links between faults and volcanic eruptions.

Water-level altitudes 2016 and water-level changes in the Chicot, Evangeline, and Jasper aquifers and compaction 1973–2015 in the Chicot and Evangeline aquifers, Houston-Galveston region, Texas

USGS Publications Warehouse

Kasmarek, Mark C.; Ramage, Jason K.; Johnson, Michaela R.

2016-10-07

Most of the land-surface subsidence in the Houston-Galveston region, Texas, has occurred as a direct result of groundwater withdrawals for municipal supply, commercial and industrial use, and irrigation that depressured and dewatered the Chicot and Evangeline aquifers, thereby causing compaction of the aquifer sediments, mostly in the fine-grained silt and clay layers. This report, prepared by the U.S. Geological Survey in cooperation with the Harris-Galveston Subsidence District, City of Houston, Fort Bend Subsidence District, Lone Star Groundwater Conservation District, and Brazoria County Groundwater Conservation District, is one in an annual series of reports depicting water-level altitudes and water-level changes in the Chicot, Evangeline, and Jasper aquifers and measured cumulative compaction of subsurface sediments in the Chicot and Evangeline aquifers in the Houston-Galveston region. The report contains regional-scale maps depicting approximate 2016 water-level altitudes (represented by measurements made during December 2015–March 2016) for the Chicot, Evangeline, and Jasper aquifers; maps depicting 1-year (2015–16) water-level changes for each aquifer; maps depicting approximate contoured 5-year (2011–16) water-level changes for each aquifer; maps depicting approximate contoured long-term (1990–2016 and 1977–2016) water-level changes for the Chicot and Evangeline aquifers; a map depicting approximate contoured long-term (2000–16) water-level changes for the Jasper aquifer; a map depicting locations of borehole-extensometer sites; and graphs depicting measured long-term cumulative compaction of subsurface sediments at the extensometers during 1973–2015. Tables listing the water-level data used to construct each water-level map for each aquifer and the measured long-term cumulative compaction data for each extensometer site are included. Graphs depicting water-level measurement data also are included; these graphs can be used to approximate

Curiosity at Vera Rubin Ridge: Testable Hypotheses, First Results, and Implications for Habitability

NASA Astrophysics Data System (ADS)

Fraeman, A.; Bedford, C.; Bridges, J.; Edgar, L. A.; Hardgrove, C.; Horgan, B. H. N.; Gabriel, T. S. J.; Grotzinger, J. P.; Gupta, S.; Johnson, J. R.; Rampe, E. B.; Morris, R. V.; Salvatore, M. R.; Schwenzer, S. P.; Stack, K.; Pinet, P. C.; Rubin, D. M.; Weitz, C. M.; Wellington, D. F.; Wiens, R. C.; Williams, A. J.; Vasavada, A. R.

2017-12-01

As of sol 1756, Curiosity was 250 meters from ascending Vera Rubin Ridge, a unique geomorphic feature preserved in the lower foothills of Aeolis Mons (informally known as Mt. Sharp) that is distinguishable from orbit. Vera Rubin Ridge (previously termed the Hematite Ridge) is characterized by a higher thermal inertia than the surrounding terrain, is comparatively resistant to erosion, and is capped with a hematite-bearing layer that is visible in 18 m/pixel CRISM data. A key hypothesis associated with this unit is that it represents a redox interface where ferrous iron oxidized and precipitated either as hematite or another ferric precursor. The Curiosity integrated payload is being used to determine the depositional environment(s), stratigraphic context and geochemical conditions associated with this interface, all of which will provide key insights into its past habitability potential and the relative timing of processes. Specifically, analysis of Curiosity data will address four major questions related to the history and evolution of ridge-forming strata: (1) What is the stratigraphic relationship between the units in the ridge and the Mt. Sharp group (see Grotzinger et al., 2015)? (2) What primary and secondary geologic processes deposited and modified the ridge units over time? (3) What is the nature and timing of the hematite precipitation environment, and how does it relate to similar oxidized phases in the Murray formation? (4) What are the implications for habitability and the preservation of organic molecules? Initial results of a systematic imaging campaign along the contact between the lower portion or the ridge and the Murray formation has revealed dm-scale cross bedding within the ridge stratigraphy, which provide clues about the depositional environments; these can be compared to suites of sedimentary structures within the adjacent Murray formation. Long distance ChemCam passive and Mastcam multispectral data show that hematite and likely other

Ridge-like lava tube systems in southeast Tharsis, Mars

NASA Astrophysics Data System (ADS)

Zhao, Jiannan; Huang, Jun; Kraft, Michael D.; Xiao, Long; Jiang, Yun

2017-10-01

Lava tubes are widely distributed in volcanic fields on a planetary surface and they are important means of lava transportation. We have identified 38 sinuous ridges with a lava-tube origin in southeast Tharsis. The lengths vary between 14 and 740 km, and most of them occur in areas with slopes < 0.3°. We analyzed their geomorphology in detail with CTX (Context Camera) and HiRISE (High Resolution Imaging Science Experiment) images and DTM (digital terrain model) derived from them. We identified three cross-sectional shapes of these sinuous ridges: round-crested, double-ridged, and flat-crested and described features associated with the lava tubes, including branches, axial cracks, collapsed pits, breakout lobes, and tube-fed lava deltas. Age determination results showed that most of the lava tubes formed in Late Hesperian and were active until the Hesperian-Amazonian boundary. We proposed that these lava tubes formed at relatively low local flow rate, low lava viscosity, and sustained magma supply during a long period. Besides, lava flow inflation is also important in the formation of the ridge-like lava tubes and some associated features. These lava tubes provide efficient lateral pathways for magma transportation over the relatively low topographic slopes in southeast Tharsis, and they are important for the formation of long lava flows in this region. The findings of this study provide an alternative formation mechanism for sinuous ridges on the martian surface.

Basalts dredged from the Amirante ridge, western Indian ocean

USGS Publications Warehouse

Fisher, R.L.; Engel, C.G.; Hilde, T.W.C.

1968-01-01

Oceanic tholeiitic basalts were dredged from 2500 to 3000 m depth on each flank of the Amirante Ridge, 1200 km southeast of Somalia in the western Indian Ocean, by R.V. Argo in 1964. One sample, probably shed from a flow or dike in basement beneath the coralline cap, gave a wholerock KAr age of 82??16??106 years. The age is similar to those reported by others for agglomerate from Providence Reef, nearer Madagascar, and for gabbro from Chain Ridge, the southwest member of Owen Fracture Zone, nearer the Somali coast. The Amirante Cretaceous-Early Tertiary occurrence lies between the "continental" 650 ?? 106 years granites of Seychelles Archipelago and the large Precambrian "continental" block of Madagascar. Trends of major structures and distribution of the related topographic and magnetic-anomaly lineations in 7-8 ?? 106 km2of the surrounding Indian Ocean suggest that in addition to spreading of the seafloor from the seismically-active Mid-Indian Ocean Ridge-Carlsberg Ridge complex there has been, since mid-Mesozoic time, distributed left-lateral shear along 52??-54??E that has moved Madagascar at least 700 km south relative to Seychelles Bank. Measurements by other indicate the absolute movement of Madagascar has been southward as well. The emplacement of oceanic tholeiitic basalts at shallow depth, the development of volcanic topography between the sedimented Somali and Mascarene basins, and the existence of the faulted Amirante Trench and Ridge are consequences of the displacement. ?? 1968.

Biology Division progress report, October 1, 1993--September 30, 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-10-01

This Progress Report summarizes the research endeavors of the Biology Division of the Oak Ridge National Laboratory during the period October 1, 1993, through September 30, 1995. The report is structured to provide descriptions of current activities and accomplishments in each of the Division`s major organizational units. Lists of information to convey the entire scope of the Division`s activities are compiled at the end of the report. Attention is focused on the following research activities: molecular, cellular, and cancer biology; mammalian genetics and development; genome mapping program; and educational activities.

Hydrodynamic role of longitudinal dorsal ridges in a leatherback turtle swimming

NASA Astrophysics Data System (ADS)

Bang, Kyeongtae; Kim, Jooha; Lee, Sang-Im; Choi, Haecheon

2016-10-01

Leatherback sea turtles (Dermochelys coriacea) are known to have a superior diving ability and be highly adapted to pelagic swimming. They have five longitudinal ridges on their carapace. Although it was conjectured that these ridges might be an adaptation for flow control, no rigorous study has been performed to understand their hydrodynamic roles. Here we show that these ridges are slightly misaligned to the streamlines around the body to generate streamwise vortices, and suppress or delay flow separation on the carapace, resulting in enhanced hydrodynamic performances during different modes of swimming. Our results suggest that shapes of some morphological features of living creatures, like the longitudinal ridges of the leatherback turtles, need not be streamlined for excellent hydro- or aerodynamic performances, contrary to our common physical intuition.

Near-ridge seamount chains in the northeastern Pacific Ocean

NASA Astrophysics Data System (ADS)

Clague, David A.; Reynolds, Jennifer R.; Davis, Alicé S.

2000-07-01

High-resolution bathymetry and side-scan data of the Vance, President Jackson, and Taney near-ridge seamount chains in the northeast Pacific were collected with a hull-mounted 30-kHz sonar. The central volcanoes in each chain consist of truncated cone-shaped volcanoes with steep sides and nearly flat tops. Several areas are characterized by frequent small eruptions that result in disorganized volcanic regions with numerous small cones and volcanic ridges but no organized truncated conical structure. Several volcanoes are crosscut by ridge-parallel faults, showing that they formed within 30-40 km of the ridge axis where ridge-parallel faulting is still active. Magmas that built the volcanoes were probably transported through the crust along active ridge-parallel faults. The volcanoes range in volume from 11 to 187 km3, and most have one or more multiple craters and calderas that modify their summits and flanks. The craters (<1 km diameter) and calderas (>1 km diameter) range from small pit craters to calderas as large as 6.5×8.5 km, although most are 2-4 km across. Crosscutting relationships commonly show a sequence of calderas stepping toward the ridge axis. The calderas overlie crustal magma chambers at least as large as those that underlie Kilauea and Mauna Loa Volcanoes in Hawaii, perhaps 4-5 km in diameter and ˜1-3 km below the surface. The nearly flat tops of many of the volcanoes have remnants of centrally located summit shields, suggesting that their flat tops did not form from eruptions along circumferential ring faults but instead form by filling and overflowing of earlier large calderas. The lavas retain their primitive character by residing in such chambers for only short time periods prior to eruption. Stored magmas are withdrawn, probably as dikes intruded into the adjacent ocean crust along active ridge-parallel faults, triggering caldera collapse, or solidified before the next batch of magma is intruded into the volcano, probably 1000-10,000 years

Oak Ridge Reservation Physical Characteristics and Natural Resources

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parr, P.D.; Hughes, J.F.

The topography, geology, hydrology, vegetation, and wildlife of the Oak Ridge Reservation (ORR) provide a complex and intricate array of resources that directly impact land stewardship and use decisions (Fig. 1). The purpose of this document is to consolidate general information regarding the natural resources and physical characteristics of the ORR. The ORR, encompassing 33,114 acres (13,401 ha) of federally owned land and three Department of Energy (DOE) installations, is located in Roane and Anderson Counties in east Tennessee, mostly within the corporate limits of the city of Oak Ridge and southwest of the population center of Oak Ridge. Themore » ORR is bordered on the north and east by the population center of the city of Oak Ridge and on the south and west by the Clinch River/Melton Hill Lake impoundment. All areas of the ORR are relatively pristine when compared with the surrounding region, especially in the Valley and Ridge Physiographic Province (Fig. 2). From the air, the ORR is clearly a large and nearly continuous island of forest within a landscape that is fragmented by urban development and agriculture. Satellite imagery from 2006 was used to develop a land-use/land-cover cover map of the ORR and surrounding lands (Fig. 3). Following the acquisition of the land comprising the ORR in the early 1940s, much of the Reservation served as a buffer for the three primary facilities: the X-10 nuclear research facility (now known as the Oak Ridge National Laboratory [ORNL]), the first uranium enrichment facility or Y-12 (now known as the Y-12 National Security Complex [Y-12 Complex]), and a gaseous diffusion enrichment facility (now known as the East Tennessee Technology Park [ETTP]). Over the past 60 years, this relatively undisturbed area has evolved into a rich and diverse eastern deciduous forest ecosystem of streams and reservoirs, hardwood forests, and extensive upland mixed forests. The combination of a large land area with complex physical

Evidence of recent volcanic activity on the ultraslow-spreading Gakkel ridge.

PubMed

Edwards, M H; Kurras, G J; Tolstoy, M; Bohnenstiehl, D R; Coakley, B J; Cochran, J R

2001-02-15

Seafloor spreading is accommodated by volcanic and tectonic processes along the global mid-ocean ridge system. As spreading rate decreases the influence of volcanism also decreases, and it is unknown whether significant volcanism occurs at all at ultraslow spreading rates (<1.5 cm yr(-1)). Here we present three-dimensional sonar maps of the Gakkel ridge, Earth's slowest-spreading mid-ocean ridge, located in the Arctic basin under the Arctic Ocean ice canopy. We acquired this data using hull-mounted sonars attached to a nuclear-powered submarine, the USS Hawkbill. Sidescan data for the ultraslow-spreading (approximately 1.0 cm yr(-1)) eastern Gakkel ridge depict two young volcanoes covering approximately 720 km2 of an otherwise heavily sedimented axial valley. The western volcano coincides with the average location of epicentres for more than 250 teleseismic events detected in 1999, suggesting that an axial eruption was imaged shortly after its occurrence. These findings demonstrate that eruptions along the ultraslow-spreading Gakkel ridge are focused at discrete locations and appear to be more voluminous and occur more frequently than was previously thought.

Feature Selection for Ridge Regression with Provable Guarantees.

PubMed

Paul, Saurabh; Drineas, Petros

2016-04-01

We introduce single-set spectral sparsification as a deterministic sampling-based feature selection technique for regularized least-squares classification, which is the classification analog to ridge regression. The method is unsupervised and gives worst-case guarantees of the generalization power of the classification function after feature selection with respect to the classification function obtained using all features. We also introduce leverage-score sampling as an unsupervised randomized feature selection method for ridge regression. We provide risk bounds for both single-set spectral sparsification and leverage-score sampling on ridge regression in the fixed design setting and show that the risk in the sampled space is comparable to the risk in the full-feature space. We perform experiments on synthetic and real-world data sets; a subset of TechTC-300 data sets, to support our theory. Experimental results indicate that the proposed methods perform better than the existing feature selection methods.

Subsidence and volcanism of the Haleakala Ridge, Hawaii

USGS Publications Warehouse

Moore, J.G.; Clague, D.A.; Ludwig, K. R.; Mark, R.K.

1990-01-01

Side-looking sonar (GLORIA) mapping has revealed a series of four arcuate bands of high sonic backscatter on the crest of the Haleakala Ridge, a major rift-zone ridge extending 135 km east of the island of Maui. Dredge recovery indicates that the shallowest of these bands is a drowned coral reef, and the deeper bands are also inferred to be coral reefs. The reefs occur above a prominent submarine bench 1500-2500 m deep on the ridge (H-terrace) that marks the shoreline at the end of vigorous shield building of Haleakala volcano when lava flows ceased crossing and reworking the shoreline. Since their growth these reefs have subsided as much as 2200 m and have tilted systematically about 20 m/km southward as a result of post-reef volcanic loading on the island of Hawaii, whose center of mass is about directly south of the Haleakala Ridge. The 234U/238U age of the dredged coral is 750 ?? 13 ka, in reasonable agreement with an age of 850 ka for the underlying H terrace previously estimated from its relationship to other dated reefs to the southwest. Basalt glass fragments dredged from the Haleakala Ridge below the H terrace are tholeiitic and contain high sulfur indicative of eruption in water deeper than 200 m. Basalt glass fragments associated with the reefs above the H terrace are dominantly tholeiitic and contain intermediate sulfur contents, indicative of subaqueous eruption in shallow, near-shore conditions. One alkalic glass fragment was recovered above the H terrace. These relations indicate that the morphologic end of shield building as recorded by construction of the H terrace was not accompanyed by a change from tholeiitic to alkalic basalt; instead tholeiite eruptions continued for some time before the erupted lava became alkalic. ?? 1990.

Endolithic Boring Enhance the Deep-sea Carbonate Lithification on the Southwest Indian Ridge

NASA Astrophysics Data System (ADS)

Peng, X.; Xu, H.

2017-12-01

Deep-sea carbonates represent an important type of sedimentary rock due to their effect on the composition of upper oceanic crust and their contribution to deep-sea geochemical cycles. However, the lithification of deep-sea carbonates at the seafloor has remained a mystery for many years. A large lithified carbonate area, characterized by thriving benthic faunas and tremendous amount of endolithic borings, was discovered in 2008, blanketed on the seafloor of ultraslow spreading Southwest Indian Ridge (SWIR). Macrofaunal inhabitants including echinoids, polychaetes, gastropods as well as crustaceans, are abundant in the sample. The most readily apparent feature of the sample is the localized enhancement of density around the borings. The boring features of these carbonate rocks and factors that may enhance deep-sea carbonate lithification are reported. The δ13CPDB values of 46 bulk samples are -0.37 to 1.86‰, while these samples have a relatively narrow δ18OPDB range of 1.35 to 3.79‰. The bulk δ13CPDB values of chalk and gray excrements are positively correlated with bulk δ18OPDB values (r = 0.91) (Fig. 8), which reflects that endolithic boring is possibly a critical factor influence the lithification. We suggest that active boring may trigger the dissolution of the original calcite and thus accelerate deep-sea carbonate lithification on mid-ocean ridges. Our study reports an unfamiliar phenomenon of non-burial carbonate lithification and interested by the observation that it is often associated with boring feature. These carbonate rocks may provide a novel mechanism for deep-sea carbonate lithification at the deep-sea seafloor and also illuminate the geological and biological importance of deep-sea carbonate rocks on mid-ocean ridges.

Olivine-Rich Troctolite from the Southwest Indian Ridge: Constrains on Melt-Rock Reaction beneath Mid-Ocean Ridges

NASA Astrophysics Data System (ADS)

Yang, A. Y.

2017-12-01

The origin of olivine-rich troctolite, which have been recovered in the plutonic sample suites from the fast-spreading East Pacific Rise, and slow-spreading Mid-Atlantic Ridge and Central Indian Ridge, has been highly debated. They can form either by fractionation of primitive mid-ocean ridge basalt (MORB) melts or by melt migrating through pre-existing (possibly mantle) olivine matrix, thus recording valuable information of magmatic process at mantle-crust transition. This study presents in situ major and trace element study on the olivine-rich troctolite first reported from the ultraslow-spreading Southwest Indian Ridge (SWIR), together with a series of samples from peridotite, gabbro to basalt from an amagmatic segment at 53°E during Dayangyihao Cruises, to investigate the magmatic processes occurred at mantle-crust transition and origin of olivine-rich troctolite. The olivine in the troctolite shows cumulate textures with interstitial clinopyroxene, plagioclase and minor spinel, which is cross-cut by an olivine gabbro vein. Olivine in the troctolite show only mildly decreasing NiO contents (from 0.31-0.25 wt.%) with decreasing Fo (from 86 to 81), and even olivine in the gabbro have NiO up to 0.24 wt.% with Fo of 75. The Fo vs. Ni correlation of olivine is shifted to uniquely higher NiO at a certain Fo compared to the trends defined by either olivine from other lower oceanic crust (LOC) cumulates worldwide or olivine compositions from classic fractionation model for primitive MORB magma. Interstitial clinopyroxene in the troctolite have high Mg# (88-90), Cr2O3 (up to 1.51 wt.%) and TiO2 contents (up to 1.01 wt.%) with Eu/Eu* from 0.4-0.6. Such high-Ti-Cr-Mg# clinopyroxene is rare among global LOC cumulates, and cannot result from simple fractionation of MORB magma. The mineral compositions in the olivine-rich troctolite could be modeled by reaction between a primitive olivine matrix and a highly evolved melt (with 2.4 wt.% TiO2), and such a melt composition is

Oak Ridge Reservation Annual Site environmental report summary for 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-09-01

This document presents a summary of the information collected for the Oak Ridge Reservation 1994 site environmental report. Topics discussed include: Oak Ridge Reservation mission; ecology; environmental laws; community participation; environmental restoration; waste management; radiation effects; chemical effects; risk to public; environmental monitoring; and radionuclide migration.

133. View of rock cut at base of rough ridge ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

133. View of rock cut at base of rough ridge and roadway crossing unnamed viaduct on Grandfather Mountain with the Great Wall of China supporting the curve in the distance. Looking southeast. - Blue Ridge Parkway, Between Shenandoah National Park & Great Smoky Mountains, Asheville, Buncombe County, NC

Dielectrophoresis device and method having insulating ridges for manipulating particles

DOEpatents

Cummings, Eric B [Livermore, CA; Fiechtner, Gregory J [Livermore, CA

2008-03-25

Embodiments of the present invention provide methods and devices for manipulating particles using dielectrophoresis. Insulating ridges and valleys are used to generate a spatially non-uniform electrical field. Particles may be concentrated, separated, or captured during bulk fluid flow in a channel having insulating ridges and valleys.

Halogen and trace element geochemistry in Mid-Ocean Ridge basalts from the Australian-Antarctic Ridge (AAR)

NASA Astrophysics Data System (ADS)

Yang, Y. S.; Seo, J. H.; Park, S. H.; Kim, T.

2015-12-01

Australian-Antarctic Ridge (AAR) is an extension of easternmost SE Indian Mid-Ocean Ridge (MOR).We collected volcanic glasses from the "in-axis" of the KR1 and KR2 MOR, and the overlapping zones of the KR1 MOR and the nearby seamounts ("KR1 mixing"). We determined trace and halogen elements in the glasses. Halogen concentrations and its ratios in the glasses are important to understand the mantle metasomatism and volatile recycling. 52 of the collected glasses are "primitive" (higher than 6 wt% MgO), while 3 of them have rather "evolved" composition (MgO wt% of 1.72, 2.95 and 4.15). K2O concentrations and Th/Sc ratios in the glasses show a negative correlation with its MgO concentration. Incompatible element ratios such as La/Sm are rather immobile during a magma differentiation so the ratios are important to understand mantle composition (Hofmann et al. 2003). La/Sm ratios in the glasses are 0.95 ~ 3.28 suggesting that the AAR basalts can be classified into T-MORB and E-MORB (Schilling et al., 1983). La/Sm ratios are well-correlated with incompatible elements such as U, Ba, Nb, and negatively correlated with compatible elements such as Sc, Eu2+, Mg. The AAR glasses contain detectable halogen elements. The "KR1 mixing" glasses in halogen elements are more abundant than "in-axis" the glasses. Cl is the least variable element compared to the other halogens such as Br and I in the AAR. The "KR1 mixing" glasses have the largest variations of Br/Cl ratios compared to the "in-axis" glasses. The Cl/Br and Th/Sc ratios in the "in-axis" glasses and in the "KR1 mixing" glasses show positive and negative correlations, respectively. The Br-rich glasses in the "KR1 mixing" zone might be explained by a recycled Br-rich oceanic slab of paleo-subduction or by a hydrothermal alteration in the AAR. I composition in the glasses does not show a correlation other trace elements. The K/Cl and K/Ti ratios in the AAR glasses are similar to the basalts from the Galapagos Spreading Center

The Tribolium castaneum Ortholog of Sex combs reduced Controls Dorsal Ridge Development

PubMed Central

Shippy, Teresa D.; Rogers, Carmelle D.; Beeman, Richard W.; Brown, Susan J.; Denell, Robin E.

2006-01-01

In insects, the boundary between the embryonic head and thorax is formed by the dorsal ridge, a fused structure composed of portions of the maxillary and labial segments. However, the mechanisms that promote development of this unusual structure remain a mystery. In Drosophila, mutations in the Hox genes Sex combs reduced and Deformed have been reported to cause abnormal dorsal ridge formation, but the significance of these abnormalities is not clear. We have identified three mutant allele classes of Cephalothorax, the Tribolium castaneum (red flour beetle) ortholog of Sex combs reduced, each of which has a different effect on dorsal ridge development. By using Engrailed expression to monitor dorsal ridge development in these mutants, we demonstrate that Cephalothorax promotes the fusion and subsequent dorsolateral extension of the maxillary and labial Engrailed stripes (posterior compartments) during dorsal ridge formation. Molecular and genetic analysis of these alleles indicates that the N terminus of Cephalothorax is important for the fusion step, but is dispensable for Engrailed stripe extension. Thus, we find that specific regions of Cephalothorax are required for discrete steps in dorsal ridge formation. PMID:16849608

Ridge Segmentation, Tectonic Evolution and Rheology of Slow-Spreading Oceanic Crust

DTIC Science & Technology

1996-09-01

important source of motivation, information, and geological field trips (remember Canarias , HeMn3’?). Dave Aubrey guided me on my first steps in Woods Hole... volcanic Ruppel, C., and P. Shaw. An elastic plate thickness map of the Mid- segmentation of the Mid-Atlantic Ridge: Kane to Atlantis Fracture Atlantic Ridge...76, 156, 1995. Smith, D. K., J. R. Cann, M. E. Dougherty, J. Lin, J. Keeton, E. McAllister, C. J. MacLeod and S. Spencer, Mid-Atlantic ridge volcanism

An enhanced structure tensor method for sea ice ridge detection from GF-3 SAR imagery

NASA Astrophysics Data System (ADS)

Zhu, T.; Li, F.; Zhang, Y.; Zhang, S.; Spreen, G.; Dierking, W.; Heygster, G.

2017-12-01

In SAR imagery, ridges or leads are shown as the curvilinear features. The proposed ridge detection method is facilitated by their curvilinear shapes. The bright curvilinear features are recognized as the ridges while the dark curvilinear features are classified as the leads. In dual-polarization HH or HV channel of C-band SAR imagery, the bright curvilinear feature may be false alarm because the frost flowers of young leads may show as bright pixels associated with changes in the surface salinity under calm surface conditions. Wind roughened leads also trigger the backscatter increasing that can be misclassified as ridges [1]. Thus the width limitation is considered in this proposed structure tensor method [2], since only shape feature based method is not enough for detecting ridges. The ridge detection algorithm is based on the hypothesis that the bright pixels are ridges with curvilinear shapes and the ridge width is less 30 meters. Benefited from GF-3 with high spatial resolution of 3 meters, we provide an enhanced structure tensor method for detecting the significant ridge. The preprocessing procedures including the calibration and incidence angle normalization are also investigated. The bright pixels will have strong response to the bandpass filtering. The ridge training samples are delineated from the SAR imagery in the Log-Gabor filters to construct structure tensor. From the tensor, the dominant orientation of the pixel representing the ridge is determined by the dominant eigenvector. For the post-processing of structure tensor, the elongated kernel is desired to enhance the ridge curvilinear shape. Since ridge presents along a certain direction, the ratio of the dominant eigenvector will be used to measure the intensity of local anisotropy. The convolution filter has been utilized in the constructed structure tensor is used to model spatial contextual information. Ridge detection results from GF-3 show the proposed method performs better compared to the

Maturation of large scale mass-wasting along the Hawaiian Ridge

DOE Office of Scientific and Technical Information (OSTI.GOV)

Torresan, M.E.; Clague, D.A.; Moore, J.G.

1990-06-01

Extensive GLORIA side-scan sonar mapping of the Hawaiian Ridge from Hawaii to St. Rogatien Bank shows that massive slumps and blocky debris avalanches are the major degradational processes that affect the island and ridge areas. About 30 failures have been imaged in the region surveyed; they range in area from 250 to > 6,000 km{sup 2} and in volume from 500 to > 5,000 km{sup 3}. Four are rotational slumps, and the rest are blocky debris avalanches. Such deposits cover 125,000 km{sup 2} of the Hawaiian Ridge and adjacent seafloor. The slumps are wide (up to 110 km), short (30-35more » km), thick (about 10 km), and slow moving. They are broken into comparatively few major rotational blocks that have not moved far and are characterized by steep toes and transverse ridges. Back rotation of the blocks has elevated their seaward edges, producing transverse ridges and perched basins filled with 5 to > 35 m of sediment. Compared to the slumps, the debris avalanches are lobate, long (up to 230 km), thin (0.5-2 km), and fast-moving. These deposits cross the Hawaiian Trough and run upslope onto the Hawaiian Arch (up to 550 m in elevation over a distance of 140 km). These failures commonly have amphitheaters and subaerial canyons at their heads. Their distal ends are hummocky, and blocky debris litters the seafloor adjacent to the ridge. As one proceeds west from Hawaii to St. Rogatien Bank, the GLORIA sonographs and seismic reflection profiles show a progression from youthful to mature failures and from active to about 12 Ma volcanoes. The Alika and Hilina slide complexes are examples of youthful failures on active volcanoes. Slumping in the Hilina slide is ongoing (7.2 magnitude earthquake in 1975). Little to no sediment covers the blocks and hummocky terrane of the Alika (about 100 ka), whereas the older deposits along the western part of the ridge are covered by up to 30 m of transparent sediment.« less

Hydrodynamic role of longitudinal dorsal ridges in a leatherback turtle swimming

PubMed Central

Bang, Kyeongtae; Kim, Jooha; Lee, Sang-Im; Choi, Haecheon

2016-01-01

Leatherback sea turtles (Dermochelys coriacea) are known to have a superior diving ability and be highly adapted to pelagic swimming. They have five longitudinal ridges on their carapace. Although it was conjectured that these ridges might be an adaptation for flow control, no rigorous study has been performed to understand their hydrodynamic roles. Here we show that these ridges are slightly misaligned to the streamlines around the body to generate streamwise vortices, and suppress or delay flow separation on the carapace, resulting in enhanced hydrodynamic performances during different modes of swimming. Our results suggest that shapes of some morphological features of living creatures, like the longitudinal ridges of the leatherback turtles, need not be streamlined for excellent hydro- or aerodynamic performances, contrary to our common physical intuition. PMID:27694826

Data Sharing Report Characterization of Isotope Row Facilities Oak Ridge National Laboratory Oak Ridge TN

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weaver, Phyllis C.

The U.S. Department of Energy (DOE) Oak Ridge Office of Environmental Management (EM-OR) requested that Oak Ridge Associated Universities (ORAU), working under the Oak Ridge Institute for Science and Education (ORISE) contract, provide technical and independent waste management planning support using funds provided by the American Recovery and Reinvestment Act (ARRA). Specifically, DOE EM-OR requested ORAU to plan and implement a survey approach, focused on characterizing the Isotope Row Facilities located at the Oak Ridge National Laboratory (ORNL) for future determination of an appropriate disposition pathway for building debris and systems, should the buildings be demolished. The characterization effort wasmore » designed to identify and quantify radiological and chemical contamination associated with building structures and process systems. The Isotope Row Facilities discussed in this report include Bldgs. 3030, 3031, 3032, 3033, 3033A, 3034, 3036, 3093, and 3118, and are located in the northeast quadrant of the main ORNL campus area, between Hillside and Central Avenues. Construction of the isotope production facilities was initiated in the late 1940s, with the exception of Bldgs. 3033A and 3118, which were enclosed in the early 1960s. The Isotope Row facilities were intended for the purpose of light industrial use for the processing, assemblage, and storage of radionuclides used for a variety of applications (ORNL 1952 and ORAU 2013). The Isotope Row Facilities provided laboratory and support services as part of the Isotopes Production and Distribution Program until 1989 when DOE mandated their shutdown (ORNL 1990). These facilities performed diverse research and developmental experiments in support of isotopes production. As a result of the many years of operations, various projects, and final cessation of operations, production was followed by inclusion into the surveillance and maintenance (S&M) project for eventual decontamination and decommissioning (D

Mantle Sources Beneath the SW Indian Ridge - Remelting the African Superplume

NASA Astrophysics Data System (ADS)

Dick, H. J. B.; Zhou, H.

2012-04-01

The SW Indian Ridge runs some 7700 km from the Bouvet to the Rodgriguez Triple Junction, crossing over or near two postulated mantle plumes. The latter are associated with large oceanic rises where the ridge axis shoals dramatically in the vicinity of the mantle hotspot. The Marion Rise, extends 3100 km from the Andrew Bain FZ to near the Rodriguez TJ, with an along axis rise of 5600-m to it crest north of Marion Island. The rise has thin crust inferred on the basis of abundant exposures of mantle peridotites along its length. We suggest that this is the result of its sub-axial mantle source, which is a depleted residue originally emplaced by the African Superplume into the asthenosphere beneath southern Africa during the Karoo volcanic event ~185 Ma. Based on shallow mantle anisotropy, plate reconstructions, and hotspot traces, it now forms the mantle substrate for the SW Indian Ridge due to the breakup of Gondwanaland. The Marion Rise is associated with Marion Island, the present location of the Marion Hotspot, some 256 km south of the modern ridge. This plume is a vestigial remnant of the African Superplume now imbedded in and centered on asthenospheric mantle derived from the Karoo event. Based on the numerous large offset fracture zones, which would dam sub-axial asthenospheric flow along the ridge, the low postulated flux of the Marion plume, its off-axis position, and the thin crust along the ridge it is clear that the present day plume does not support the Marion Rise. Instead, this must be supported isostatically by the underlying mantle residue of the Karoo event. The Bouvet Rise is much shorter than the Marion Rise, extending ~664 km from the Conrad FZ on the American-Antarctic Ridge to the Shaka FZ on the SW Indian Ridge. It has ~3000-m of axial relief, peaking at Speiss Smt at Speiss Ridge: the last spreading segment of the SW Indian Ridge adjacent to the Bouvet TJ. Unlike the Marion plume, Bouvet is ridge-centered, and much of its rise is likely

Geospatializing The Klang Gate Quartz Ridge in Malaysia: A Technological Perspective

NASA Astrophysics Data System (ADS)

Azahari Razak, Khamarrul; Mohamad, Zakaria; Zaki Ibrahim, Mohd; Azad Rosle, Qalam; Hattanajmie Abd Wahab, Mohd; Abu Bakar, Rabieahtul; Mohd Akib, Wan Abdul Aziz Wan

2015-04-01

Establishment of inventories on geological heritage, or geoheritage resources is a step forward for a comprehensive geoheritage management leading to a better conservation at national and global levels. Compiling and updating inventory of geoheritage is a tedious process and even so in a tropical environment. Malaysia has a tremendous list of geodiversity and generating its national database is a multi-institutional effort and worthwhile investment. However, producing accurate and reliable characteristics of such landform and spectacular geological features remained elusive. The advanced and modern mapping techniques have revolutionized the mapping, monitoring and modelling of the earth surface processes and landforms. Yet the methods for quantification of geodiversity physical features are not fully utilized in Malaysia for a better understanding its processes and activity. This study provides a better insight into the use of advanced active remote sensing technology for characterizing the forested Quartz Ridge in Malaysia. We have developed the novel method and tested in the Klang Gates Quartz Ridge, Selangor. The granitic country rock made up by quartz mineral is known as the longest quartz ridge in Malaysia and characterized by rugged topography, steep slopes, densely vegetated terrain and also rich-biodiversity area. This study presents an integrated field methodological framework and processing scheme by taking into account the climatic, topographic, geologic, and anthropogenic challenges in an equatorial region. Advanced terrestrial laser scanning system was used to accurately capture, map and model the ridge carried out within a relatively stringent time period. The high frequency Global Navigation Satellite System and modern Total Station coupled with the optical satellite and radar imageries and also advanced spatial analysis were fully utilized in the field campaign and data assessment performed during the recent monsoon season. As a result, the mapping

Morphology of sea ice pressure ridges in the northwestern Weddell Sea in winter

NASA Astrophysics Data System (ADS)

Tan, Bing; Li, Zhi-Jun; Lu, Peng; Haas, Christian; Nicolaus, Marcel

2012-06-01

To investigate the morphology and distribution of pressure ridges in the northwestern Weddell Sea, ice surface elevation profiles were measured by a helicopter-borne laser altimeter during Winter Weddell Outflow Study with the German R/V Polarstern in 2006. An optimal cutoff height of 0.62 m, derived from the best fits between the measured and theoretical ridge height and spacing distributions, was first used to separate pressure ridges from other sea ice surface undulations. It was found that the measured ridge height distribution was well modeled by a negative exponential function, and the ridge spacing distribution by a lognormal function. Next, based on the ridging intensity Ri (the ratio of mean ridge sail height to mean spacing), all profiles were clustered into three regimes by an improved k-means clustering algorithm: Ri ≤ 0.01, 0.01 < Ri ≤ 0.026, and Ri > 0.026 (denoted as C1, C2, and C3 respectively). Mean (and standard deviation) of sail height was 0.99 (±0.07) m in Regime C1, 1.12 (±0.06) m in C2, and 1.17 (±0.04) m in C3, respectively, while the mean spacings (and standard deviations) were 232 (±240) m, 54 (±20) m, and 31 (±5.6) m. These three ice regimes coincided closely with distinct sea ice regions identified in a satellite radar image, where C1 corresponded to the broken ice in the marginal ice zone and level ice formed in the Larsen Polynya, C2 corresponded to the deformed first- and second-year ice formed by dynamic action in the center of the study region, and C3 corresponded to heavily deformed ice in the outflowing branch of the Weddell Gyre. The results of our analysis showed that the relationship between the mean ridge height and frequency was well modeled by a logarithmic function with a correlation coefficient of 0.8, although such correlation was weaker when considering each regime individually. The measured ridge height and frequency were both greater than those reported by others for the Ross Sea. Compared with reported

Cold-seep habitat mapping: High-resolution spatial characterization of the Blake Ridge Diapir seep field

NASA Astrophysics Data System (ADS)

Wagner, Jamie K. S.; McEntee, Molly H.; Brothers, Laura L.; German, Christopher R.; Kaiser, Carl L.; Yoerger, Dana R.; Van Dover, Cindy Lee

2013-08-01

Relationships among seep community biomass, diversity, and physiographic controls such as underlying geology are not well understood. Previous efforts to constrain these relationships at the Blake Ridge Diapir were limited to observations from piloted deep-submergence vehicles. In August 2012, the autonomous underwater vehicle (AUV) Sentry collected geophysical and photographic data over a 0.131 km2 area at the Blake Ridge Diapir seeps. A nested survey approach was used that began with a regional or reconnaissance-style survey using sub-bottom mapping systems to locate and identify seeps and underlying conduits. This survey was followed by AUV-mounted sidescan sonar and multibeam echosounder systems mapping on a mesoscale to characterize the seabed physiography. At the most detailed survey level, digital photographic imaging was used to resolve sub-meter characteristics of the biology. Four pockmarks (25-70 m diameter) were documented, each supporting chemosynthetic communities. Concentric zonation of mussels and clams suggests the influence of chemical gradients on megafaunal distribution. Data collection and analytical techniques used here yield high-resolution habitat maps that can serve as baselines to constrain temporal evolution of seafloor seeps, and to inform ecological niche modeling and resource management.

Cold-seep habitat mapping: high-resolution spatial characterization of the Blake Ridge Diapir seep field

USGS Publications Warehouse

Wagner, Jamie K.S.; McEntee, Molly H.; Brothers, Laura L.; German, Christopher R.; Kaiser, Carl L.; Yoerger, Dana R.; Van Dover, Cindy Lee

2013-01-01

Relationships among seep community biomass, diversity, and physiographic controls such as underlying geology are not well understood. Previous efforts to constrain these relationships at the Blake Ridge Diapir were limited to observations from piloted deep-submergence vehicles. In August 2012, the autonomous underwater vehicle (AUV) Sentry collected geophysical and photographic data over a 0.131 km2 area at the Blake Ridge Diapir seeps. A nested survey approach was used that began with a regional or reconnaissance-style survey using sub-bottom mapping systems to locate and identify seeps and underlying conduits. This survey was followed by AUV-mounted sidescan sonar and multibeam echosounder systems mapping on a mesoscale to characterize the seabed physiography. At the most detailed survey level, digital photographic imaging was used to resolve sub-meter characteristics of the biology. Four pockmarks (25–70 m diameter) were documented, each supporting chemosynthetic communities. Concentric zonation of mussels and clams suggests the influence of chemical gradients on megafaunal distribution. Data collection and analytical techniques used here yield high-resolution habitat maps that can serve as baselines to constrain temporal evolution of seafloor seeps, and to inform ecological niche modeling and resource management.

The rise and fall of axial highs during ridge jumps

NASA Astrophysics Data System (ADS)

Shah, Anjana K.; Buck, W. Roger

2006-08-01

We simulate jumps of ocean spreading centers with axial high topography using elastoplastic thin plate flexure models. Processes considered include ridge abandonment, the breaking of a stressed plate on the ridge flank, and renewed spreading at the site of this break. We compare model results to topography at the East Pacific Rise between 15°25'N and 16°N, where there is strong evidence of a recent ridge jump. At an apparently abandoned ridge, gravity data do not suggest buoyant support of topography. Model deflections during cooling and melt solidification stages of ridge abandonment are of small vertical amplitude because of plate strengthening, resulting in the preservation of a "frozen" fossil high. The present-day high is bounded by slopes with up to a 40% grade, a scenario very difficult to achieve flexurally given generally accepted constraints on lithospheric strength. We model these slopes by assuming that the height at which magma is accreted increases rapidly after the ridge jumps. This increase is attributed to high overburden pressure on melt that resided in an initially deep magma chamber, followed by a rapid increase in temperature and melt supply to the region shortly after spreading began. The high is widest at the segment center, suggesting that magmatic activity began near the center of the segment, propagated south and then north. The mantle Bouguer anomaly exhibits a "bull's-eye" pattern centered at the widest part of the high, but the depth of the axis is nearly constant along the length of the segment. We reconcile these observations by assigning different cross-axis widths to a low-density zone within the crust.

Planktic foraminifer census data from Northwind Ridge Core 5, Arctic Ocean

USGS Publications Warehouse

Foley, Kevin M.; Poore, Richard Z.

1991-01-01

The U.S. Geological Survey recovered 9 piston cores from the Northwind Ridge in the Canada Basin of the Arctic Ocean from a cruise of the USCGC Polar Star during 1988. Preliminary analysis of the cores suggests sediments deposited on Northwind Ridge preserve a detailed record of glacial and interglacial cycles for the last few hundred-thousand to one million years. This report includes quantitative data on foraminifers and selected sediment size-fraction data in samples from Northwind Ridge core PI-88AR P5.

Seismotectonics of the Gagua Ridge area from OBS data

NASA Astrophysics Data System (ADS)

Chen, Y. F.; Lin, J. Y.; Lee, C. S.; Hsu, S. K.; Liang, C. W.

2012-04-01

Gagua Ridge, located on the east of Taiwan Island, is generally considered an inactive ridge. This ridge is a N-S trending tectonic feature and separates two oceanic basin of different ages, which are the Huatung Basin in the west and the West Philippine Basin in the east respectively. On 26 April 2010, a Mw=6.9 event, characterized by a strike-slip mechanism, occurred in the east of the Gagua Ridge. The distribution of background earthquakes shows low seismic activity in the vicinity of the mainshock. A network of OBSs was deployed around the mainshock for 21 days. The network contains part of the West Philippine Basin and of the Gagua Ridge. In total, 1,711 earthquakes were determined. Most of the earthquakes occurred near the mainshock and few earthquakes scattered near the Gagua Ridge. Relocated hypocenters, which are relocated by hypoDD software, are clustered and aligned to the NW-SE direction. It indicates that the area is dominated by a sinistral strike-slip mechanism. In West Philippine Basin, two main geological structures, oriented NE-SW and NW-SE, were recognized from bathymetry map. The two features are associated with the first spreading event in West Philippine Basin and an old oceanic fracture zone. Since the trending of the cluster in our study is different from the strikes of the two features in the West Philippine Basin, the seismicity seems not to be linked to the reactivation of the former structures. Magnetic anomaly shows a NW-SE trending anomaly in the east of Taiwan Island, was suggested a present-day transform margin. The cluster is located on the SE end of boundary of the anomaly and the trending of the cluster is consistent with the orientation of the anomaly, which is parallel to the direction of Eurasia-Philippine relative motion. Therefore, we suggest that the presence of the sinistral strike-slip fault may reflect the different stress states in each side of the fault and form a stress transform boundary.

Abyssal Upwelling in Mid-Ocean Ridge Fracture Zones

NASA Astrophysics Data System (ADS)

Clément, Louis; Thurnherr, Andreas M.

2018-03-01

Turbulence in the abyssal ocean plays a fundamental role in the climate system by sustaining the deepest branch of the overturning circulation. Over the western flank of the Mid-Atlantic Ridge in the South Atlantic, previously observed bottom-intensified and tidally modulated mixing of abyssal waters appears to imply a counterintuitive densification of deep and bottom waters. Here we show that inside fracture zones, however, turbulence is elevated away from the seafloor because of intensified downward propagating near-inertial wave energy, which decays below a subinertial shear maximum. Ray-tracing simulations predict a decay of wave energy subsequent to wave-mean flow interactions. The hypothesized wave-mean flow interactions drive a deep flow toward lighter densities of up to 0.6 Sv over the mid-ocean ridge flank in the Brazil Basin, and the same process may also cause upwelling of abyssal waters in other ocean basins with mid-ocean ridges with fracture zones.

247. Axial Parkway alignment along ridge top. Note the open ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

247. Axial Parkway alignment along ridge top. Note the open vistas to either side of the roadway. These are maintained through vegetation management. The wood guide rail is a primary safety feature. View is to the northeast. - Blue Ridge Parkway, Between Shenandoah National Park & Great Smoky Mountains, Asheville, Buncombe County, NC

Fingerprint Ridge Count: A Polygenic Trait Useful in Classroom Instruction.

ERIC Educational Resources Information Center

Mendenhall, Gordon; And Others

1989-01-01

Describes the use of the polygenic trait of total fingerprint ridge count in the classroom as a laboratory investigation. Presents information on background of topic, fingerprint patterns which are classified into three major groups, ridge count, the inheritance model, and activities. Includes an example data sheet format for fingerprints. (RT)

Summary of the hydrogeology of the Valley and Ridge, Blue Ridge, and Piedmont Physiographic Provinces in the eastern United States

USGS Publications Warehouse

Swain, Lindsay A.; Mesko, Thomas O.; Hollyday, Este F.

2004-01-01

The Appalachian Valley and Piedmont Regional Aquifer-System Analysis study (1988-1993) analyzed rock types in the 142,000-square-mile study area, identified hydrogeologic terranes, determined transmissivity distributions, determined the contribution of ground water to streamflow, modeled ground-water flow, described water quality, and identified areas suitable for the potential development of municipal and industrial ground-water supplies. Ground-water use in the Valley and Ridge, the Blue Ridge, and the Piedmont Physiographic Provinces exceeds 1.7 billion gallons per day.Thirty-three rock types in the study area were analyzed, and the rock types with similar water-yielding characteristics were combined and mapped as 10 hydrogeologic terranes. Based on well records, the interquartile ranges of estimated transmissivities are between 180 to 17,000 feet squared per day (ft2/d) for five hydrologic terranes in the Valley and Ridge; between 9 to 350 ft2/d for two terranes in the Blue Ridge; and between 9 to 1,400 ft2/d for three terranes in the Piedmont Physiographic Province. Based on streamflow records, the interquartile ranges of estimated transmissivities for all three physiographic provinces are between 290 and 2,900 ft2/d. The mean ground-water contribution to streams from 157 drainage basins ranges from 32 to 94 percent of mean streamflow with a median of 67 percent. In three small areas in two of the physiographic provinces, more than 54 percent of ground-water flow was modeled as shallow and local. Although ground-water chemical composition in the three physiographic provinces is distinctly different, the water generally is not highly mineralized, with a median dissolved-solids concentration of 164 milligrams per liter, and is mostly calcium, magnesium, and bicarbonate. Based on aquifer properties and current pumpage, areas favorable for the development of municipal and industrial ground-water supplies are underlain by alluvium of glacial origin near the

Eskers in Ireland, analogs for sinuous ridges on Mars

NASA Astrophysics Data System (ADS)

Pellicer, Xavier; Bourke, Mary

2014-05-01

Sinuous ridges on the surface of Mars are often inferred as putative esker ridges. Eskers cover several hundred kilometers of the Irish landscape and are one of the dominant landforms in the Irish Midlands. Well exposed stratigraphic sections and the body of existing knowledge due to extensive research carried out on these landforms make the Irish eskers an excellent analog for sinuous ridges on Mars. The Irish Eskers are sinuous ridges 0.1 - 80 km long, 20 - 500 m wide and 4 - 50 m high laid down by glacial meltwater in tunnels and crevasses in stationary or retreating ice sheets. They are commonly composed of sands and gravels with rounded boulders and cobbles. The gravels are usually bedded and the beds often slump towards the flank of the esker, indicating collapse as the confining ice walls melt. Four types of eskers have been identified in Ireland: (i) Continuous subglacial tunnel fill represents deposition within tunnels underneath or within an ice body originally used as water escape conduits; (ii) Continuous fluvial ice-channel fill deposit in channels cut into the ice on top of the glacier or down to the substrate subsequently infilled by sediments; (iii) Long beads - subglacial tunnel fill are segmented ridges, with a length-width ratio of 5:1 to 10:1, representing sequential deposition near or at the ice margin as the ice sheet retreats; (iv) Short beads are glaciolacustrine deposits interpreted as sequential deposition of ice-contact subaqueous outwash fans. Irish eskers have significant morphological similarities with those identified on Mars providing an opportunity for an insightful morphological and morphometric analysis to determine potential formative environments on Mars. Putative Martian eskers are 2-300 km long, 50-3000 m wide and 10-150 m high. The Irish eskers are similar in scale and present dimensions within these ranges. Eskers in Ireland are composed of sand and gravel with cobbles and boulders. Mars esker-like ridges observed in high

Ridge-flank crustal microbiology investigated with long-term borehole observatories

NASA Astrophysics Data System (ADS)

Orcutt, B. N.; Bach, W.; Becker, K.; Edwards, K. J.; Fisher, A. T.; Haddad, A.; Hulme, S.; Teske, A.; Toner, B.; Wheat, C. G.

2011-12-01

The ridge flank environment represents an important habitat for microbial life on Earth, considering its size and chemical disequilibria between circulating fluids and rocks. However, the potential for this habitat to harbor life, and the characteristics that such life might have, are poorly known at present. Furthermore, the interactions of microbial communities across deep sediment-basement interfaces are not well-characterized. Subseafloor borehole observatories provide a novel platform for sampling and monitoring the microbiology of the crustal ridge flank environment. We present current results from a series of subsurface microbial colonization experiments using borehole observatories on the eastern flank of the Juan de Fuca Ridge, as well as analysis of samples collected on a transect away from a seawater-recharging seamount on this ridge flank. These results are compared to the microbiology of observatories installed in the Costa Rica Rift flank with similar fluid composition and temperatures (i.e. anoxic and warm). We will also discuss on-going experiments on the western-flank of the Mid-Atlantic Ridge, where formation fluids in basement are oxic and cool. Results from these experiments represent some of the extremes in crustal fluid conditions, paving the way for additional studies that are needed to address the importance of this biome as a carbon reservoir and a mechanism for crustal alteration.

Crustal structure of the Agulhas Ridge (South Atlantic Ocean): Formation above a hotspot?

NASA Astrophysics Data System (ADS)

Jokat, Wilfried; Hagen, Claudia

2017-10-01

The southern South Atlantic Ocean contains several features believed to document the traces of hotspot volcanism during the early formation of the ocean basin, namely the Agulhas Ridge and the Cape Rise seamounts located in the southeast Atlantic between 36°S and 50°S. The Agulhas Ridge parallels the Agulhas-Falkland Fracture Zone, one of the major transform zones of the world. The morphology of the ridge changes dramatically from two parallel segments in the southwest, to the broad plateau-like Agulhas Ridge in the northeast. Because the crustal fabric of the ridge is unknown relating its evolution to hotspots in the southeast Atlantic is an open question. During the RV Polarstern cruise ANT-XXIII-5 seismic reflection and refraction data were collected along a 370 km long profile with 8 Ocean Bottom Stations to investigate its crustal fabric. The profile extends in NNE direction from the Agulhas Basin, 60 km south of the Agulhas Ridge, and continues into the Cape Basin crossing the southernmost of the Cape Rise seamounts. In the Cape Basin we found a crustal thickness of 5.5-7.5 km, and a velocity distribution typical for oceanic crust. The Cape Rise seamounts, however, show a higher velocity in comparison to the surrounding oceanic crust and the Agulhas Ridge. Underplated material is evident below the southernmost of the Cape Rise seamounts. It also has a 5-8% higher density compared to the Agulhas Plateau. The seismic velocities of the Agulhas Ridge are lower, the crustal thickness is approximately 14 km, and age dating of dredge samples from its top provides clear evidence of rejuvenated volcanism at around 26 Ma. Seismic data indicate that although the Cape Rise seamounts formed above a mantle thermal anomaly it had a limited areal extent, whereas the hotspot material that formed the Agulhas Ridge likely erupted along a fracture zone.

Chemical and Mineralogical Characterization of a Hematite-bearing Ridge on Mauna Kea, Hawaii: A Potential Mineralogical Process Analog for the Mount Sharp Hematite Ridge

NASA Technical Reports Server (NTRS)

Graff, T. G.; Morris, R. V.; Ming, D. W.; Hamilton, J. C.; Adams, M.; Fraeman, A. A.; Arvidson, R. E.; Catalano, J. G.; Mertzman, S. A.

2014-01-01

The Mars Science Laboratory (MSL) rover Curiosity landed in Gale Crater in August 2012 and is currently roving towards the layered central mound known as Mount Sharp [1]. Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) hyperspectral data indicate Mount Sharp contains an 5 km stratigraphic sequence including Fe-Mg smectites, hematite, and hydrated sulfates in the lower layers separated by an unconformity from the overlying anhydrous strata [1,2,3]. Hematite was initially detected in CRISM data to occur in the lower sulfate layers on the north side of the mound [2]. [3] further mapped a distinct hematite detection occurring as part of a 200 m wide ridge that extends 6.5 km NE-SW, approximately parallel with the base of Mount Sharp. It is likely a target for in-situ analyses by Curiosity. We document here the occurrence of a stratum of hematite-bearing breccia that is exposed on the Puu Poliahu cinder cone near the summit of Mauna Kea volcano (Hawaii) (Fig.1). The stratum is more resistant to weathering than surrounding material, giving it the appearance of a ridge. The Mauna Kea hematite ridge is thus arguably a potential terrestrial mineralogical and process analog for the Gale Crater hematite ridge. We are acquiring a variety of chemical and mineralogical data on the Mauna Kea samples, with a focus on the chemical and mineralogical information already available or planned for the Gale hematite ridge.

Lower Tertiary laterite on the Iceland-Faeroe Ridge and the Thulean land bridge

USGS Publications Warehouse

Nilsen, T.H.

1978-01-01

CORES of a lower Tertiary lateritic palaeosol resting on basalt were recovered1 from Deep Sea Drilling Project Site 336 (Leg 38) on the north-east flank of the Iceland-Faeroe Ridge (Fig. 1), a major aseismic oceanic ridge that, together with Iceland, forms the Icelandic transverse ridge 2. The transverse ridge extends from the West European continental margin to the East Greenland continental margin, forming the geographic boundary and a partial barrier to flow of water between the Norwegian-Greenland Sea to the north and the northern North Atlantic Ocean to the south. The palaeosol indicates that at least part of the Iceland-Faeroe Ridge was above sea level during early Tertiary time3. Palaeogeographic and palaeooceanographic reconstructions suggest that it formed the main part of the Thulean land bridge that connected South-east Greenland and the Faeroe islands during the early Tertiary4. This report summarises the subsidence history of the Iceland-Faeroe Ridge relative to early Tertiary seafloor spreading, basaltic volcanism, and the development of the proposed Thulean land bridge. ?? 1978 Nature Publishing Group.

Superposed ridges of the Hesperia Planum area on Mars

NASA Technical Reports Server (NTRS)

Raitala, Jouko

1988-01-01

Mare ridges of the Hesperia Planum area form linear, reticular and circular structures. The main factors effective in mare ridge formation have been: (1) a large areal, or maybe even global, shortening and compression, (2) major crustal tectonics, and (3) the moderation of tectonic movements by the megaregolith discontinuity layer(s) between surface lavas and the bedrock leaving the compressional thrust to dominate over other fault movements in surface tectonics.

INCREASED IL-8 AND IL-6 EXPRESSION IN HUMAN AIRWAY EPITHELIAL CELLS EXPOSED TO CARBON ULTRAFINE PARTICLES

EPA Science Inventory

INCREASED IL-6 AND IL-8 EXPRESSION IN HUMAN AIRWAY EPITHELIAL CELLS EXPOSED TO CARBON ULTRAFINE PARTICLES.
R Silbajoris1, A G Lenz2, I Jaspers3, J M Samet1. 1NHEERL, USEPA, RTP, NC, USA; 2GSF-Institute for Inhalation Biology, Neuherberg, Germany; 3 CEMLB, UNC-CH, Chapel Hill, ...

ACTIVATION OF AP-1 IN UROTSA CELLS BY METHYLATED ARSENICALS

EPA Science Inventory

ACTIVATION OF AP-1 IN UROTSA CELLS BY METHYLATED TRIVALENT ARSENICALS. Z Drobna1, I Jaspers2, D J Thomas3 and M Styblo1. 1Department of Pediatrics; 2Center for Environmental Medicine and Lung Biology, University of North Carolina at Chapel Hill, NC, USA; 3US EPA, RTP, NC, USA.

Ridge Regression for Interactive Models.

ERIC Educational Resources Information Center

Tate, Richard L.

1988-01-01

An exploratory study of the value of ridge regression for interactive models is reported. Assuming that the linear terms in a simple interactive model are centered to eliminate non-essential multicollinearity, a variety of common models, representing both ordinal and disordinal interactions, are shown to have "orientations" that are…

Retrospective success and survival rates of dental implants placed after a ridge preservation procedure.

PubMed

Apostolopoulos, Peter; Darby, Ivan

2017-04-01

Ridge preservation is any procedure that takes place at the time of, or shortly after an extraction, to minimise resorption of the ridge and maximise bone formation within the socket. The aim of this project is to investigate the outcome of implant treatment following ridge preservation and compare it to an ungrafted implant control group. Following ethics approval, an electronic and manual search of patient records was conducted, and appropriate cases of implant placement following a ridge preservation procedure were identified. Forty-two patients with 51 implants at ridge-preserved sites were examined by one author (PA) with the following parameters assessed at each implant: pocket probing depth, bleeding on probing, presence/absence of plaque and radiographic bone loss. Clinical and radiographic findings were compared to an ungrafted implant control group and analysed by years in function. There was a 100% survival rate of implants in ridge-preserved sites. In the majority of cases, ridge preservation was performed in the anterior maxilla with a flap raised and the use of deproteinised bovine bone mineral and collagen membrane materials. The mean time in function was 31 (±24) months with a range of 2-102 months. Differences in the mean PPD, BOP, plaque index and radiographic bone loss were not statistically significant between implants at ridge-preserved or ungrafted sites. The overall success rate was around 58% for ungrafted implants and around 51% for implants in ridge-preserved sites. However, this difference was not statistically significant. In this retrospective study, implant placement at ridge-preserved sites was a predictable procedure that led to very high survival rates and similar success rates to implant placement at ungrafted sites. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Island emergence/subsidence histories and their bearing upon biological speciation in the Galápagos

NASA Astrophysics Data System (ADS)

Orellana Rovirosa, F.

2017-12-01

In the context of plate motion reconstructions for the Nazca, Cocos and South American plates in relation with the Galápagos hotspot, it is found that the age-depth dependence of bathymetry, dynamic topography due to the Galápagos plume, crustal relaxation, and magmatic production allow for us to estimate the subsidence of islands and seamounts along the Carnegie Ridge. Our estimates are partially based on geodynamic theory (fluid mechanics and elasticity), but also on detailed bathymetric observations and analysis. For the Carnegie Ridge saddle, we estimate subsidence of about 2 km occurring during the past 13 Ma. Because the present-day depths of the region are in the range 2-2.5 km, this assessment shows that the deepest region of the present-day Carnegie Ridge may have been above sea level when it was closer to the active hotspot, therefore providing habitat for land species for a few (<5) million years. Moreover, the migrating hotspot swell may have caused the emerging of different portions of the Carnegie Ridge on a spatio-temporal progression. A more sophisticated 3D numerical model including an asthenosphere and plume interacting with the overlying Nazca plate may provide an improved understanding of geological-biological co-evolution in the Galápagos-Carnegie Ridge.

Ridges in Mars' south polar region

NASA Technical Reports Server (NTRS)

1998-01-01

Complex of rectilinear intersecting ridges in the south polar region. This 20 x 14 km area image (frame 7908) is centered near 81.5 degrees south, 65 degrees west.

Figure caption from Science Magazine

Curvilinear ridges and related features in southwest Cydonia Mensae, Mars

NASA Technical Reports Server (NTRS)

Parker, Timothy J.; Schneeberger, Dale M.; Pieri, David C.; Saunders, R. Stephen

1987-01-01

Examined is a region on Mars in southwest Cydonia Mensae (32 deg lat., 17 deg long.) just northwest of the lowland/upland boundary escarpment. The dominant morphological features in this region are the clusters of large massifs and plateau outliers (PI), knobby material (K), and smooth lowland plains (Ps). Surrounding the clusters and linking many isolated knobs is a system of curvilinear ridges and arcuate terrain boundaries which tend to separate the massifs and knobs from the smooth plains. Curvilinear ridges are arcuate to nearly linear and smoother in plan than wrinkle ridges and show no apparent correlation with regional structural grain. They are typically 5 to 10 km long but can range from as little as 2 or 3 km to greater than 50 km long. The widths vary from about 100 m to as much as 2 km. Curvilinear ridges are most numerous within 100 km of the lowland/upland boundary escarpment and are associated with massifs and knobby terrain. Arcuate terrain boundaries appear between units of different apparent albedo or arcuate breaks in slope.

Inferring the width of the upwelling region at mid-ocean ridges from the throttling effect of small-offset transforms: Implications for the dynamics of `normal' and plume-influenced mid- ocean ridges

NASA Astrophysics Data System (ADS)

Phipps Morgan, J.; Ranero, C. R.

2006-12-01

The fundamental question "How wide is the upwelling and melting region beneath mid-ocean ridges (MORs)?" remains a subject of ongoing debate after 4 decades of intensive study. The basic observational difficulty is that lateral melt migration has the potential to bring melt produced within a wide subaxial region to the ~2km- wide neovolcanic zone that has been observed to be the site of almost all oceanic crustal emplacement. Here we use an indirect approach to infer this width from the minimum length of the ridge-offsets that mark the limits of the `region of influence' of on-ridge plumes on the axial relief, axial morphology, and crustal thickness along the ridge — e.g. as seen along ridge segments influenced by the Galapagos and Iceland plumes, and at the terminations of fossil volcanic rifted margins and the paleo-Azores plume-ridge interaction. We adopt Vogt's [1972] hypothesis for along-ridge asthenospheric flow in a narrow vertical slot beneath the axis of plume- influenced `macro-segments'. We find that: (1) There is a threshold distance to the lateral offsets that bound plume-influenced macrosegments; all such `barrier offsets' are greater than ~30km, while smaller offsets do not appear to be a barrier to along-axis flow. (2) Recent seismic and E-M observations along the southern EPR are consistent with a narrow westward-dipping subaxial slot. (3) A similar pattern is seen in the often abrupt transitions between volcanic and non-volcanic rifted margins, which is discussed in a companion presentation by Ranero and Phipps Morgan (this meeting). (4) A ~30km width for the region of ridge upwelling and melting offers a simple conceptual explanation for the apparent ~30km threshold length for the existence of strike-slip transform faults and the occurrence of non-transform offsets at smaller ridge offset-distances. (5) It also offers a simple conceptual explanation for the largest scale of segmentation of axial relief seen at fast-spreading ridges; these 500

Site characterization summary report for dry weather surface water sampling upper East Fork Poplar Creek characterization area Oak Ridge Y-12 Plant, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This report describes activities associated with conducting dry weather surface water sampling of Upper East Fork Poplar Creek (UEFPC) at the Oak Ridge Y-12 Plant, Oak Ridge, Tennessee. This activity is a portion of the work to be performed at UEFPC Operable Unit (OU) 1 [now known as the UEFPC Characterization Area (CA)], as described in the RCRA Facility Investigation Plan for Group 4 at the Oak- Ridge Y-12 Plant, Oak Ridge, Tennessee and in the Response to Comments and Recommendations on RCRA Facility Investigation Plan for Group 4 at the Oak Ridge Y-12 Plant, Oak Ridge, Tennessee, Volume 1,more » Operable Unit 1. Because these documents contained sensitive information, they were labeled as unclassified controlled nuclear information and as such are not readily available for public review. To address this issue the U.S. Department of Energy (DOE) published an unclassified, nonsensitive version of the initial plan, text and appendixes, of this Resource Conservation and Recovery Act (RCRA) Facility Investigation (RFI) Plan in early 1994. These documents describe a program for collecting four rounds of wet weather and dry weather surface water samples and one round of sediment samples from UEFPC. They provide the strategy for the overall sample collection program including dry weather sampling, wet weather sampling, and sediment sampling. Figure 1.1 is a schematic flowchart of the overall sampling strategy and other associated activities. A Quality Assurance Project Plan (QAPJP) was prepared to specifically address four rounds of dry weather surface water sampling and one round of sediment sampling. For a variety of reasons, sediment sampling has not been conducted and has been deferred to the UEFPC CA Remedial Investigation (RI), as has wet weather sampling.« less

The Oak Ridge Reservation Annual Site Environmental Report, 2007

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hughes, Joan; Thompson, Sharon; Page, David

2008-09-30

The Oak Ridge Reservation (ORR) consists of three major government-owned, contractor-operated facilities: the Y-12 National Security Complex, Oak Ridge National Laboratory, and East Tennessee Technology Park. The ORR was established in the early 1940s as part of the Manhattan Project, a secret undertaking that produced materials for the first atomic bombs. The reservation’s role has evolved over the years, and it continues to adapt to meet the changing defense, energy, and research needs of the United States. Both the work carried out for the war effort and subsequent research, development, and production activities have involved, and continue to involve, themore » use of radiological and hazardous materials. The Oak Ridge Reservation Annual Site Environmental Report and supporting data are available at Http://www.ornl.gov/sci/env_rpt or from the project director.« less

Gravitational stresses in long symmetric ridges and valleys in anisotropic rock

USGS Publications Warehouse

Pan, E.; Amadei, B.; Savage, W.Z.

1994-01-01

The effect of topography and rock mass anisotropy on gravitational stresses in long isolated symmetric ridges and valleys is modeled using an analytical method proposed earlier by the first two authors. The rock mass deforms under a condition of plane strain. A parametric study is presented on the effect of (1) topography, (2) orientation of anisotropy and (3) degree of anisotropy on the magnitude and distribution of gravitational stresses in transversely isotropic rock masses with planes of anisotropy striking parallel to the ridge or valley axis. It is found that compressive stresses develop near ridge crests and that tensile stresses develop in valley bottoms and valley walls. The magnitude of the gravitational stresses is of the order of the characteristics stress ??{variant}g??b?? where ??{variant} is the rock density, g is the gravitational acceleration and ??b?? is the height of the ridge or depth of the valley. ?? 1994.

[Soft-ridged bench terrace design in hilly loess region].

PubMed

Cao, Shixiong; Chen, Li; Gao, Wangsheng

2005-08-01

Reconfiguration of hillside field into terrace is regarded as one of the key techniques for water and soil conservation in mountainous regions. On slopes exceeding 30 degrees, the traditional techniques of terracing are difficult to apply as risers (i.e., backslopes), and if not reinforced, are so abrupt and easy to collapse under gravity alone, thus damaging the terrace. To improve the reconfiguration of hillside field into terrace, holistic techniques of soft-ridged bench terrace engineering, including revegetation, with trees and planting grasses on riser slopes, were tested between 1997 and 2001 in Xiabiangou watershed of Yan' an, Shaanxi Province. A "working with Nature" engineering approach, riser slopes of 45 degrees, similar to the pre-existing slope of 35 degrees, was employed to radically reduce gravity-erosion. Based on the concepts of biodiversity and the principles of landscape ecology, terrace benches, bunds, and risers were planted with trees, shrubs, forage grasses, and crops, serving to generate a diverse array of plants, a semi-forested area, and to stabilize terrace bunds. Soft-ridged bench terrace made it possible to significantly reduce hazards arising from gravity erosion, and reduce the costs of individual bench construction and maintenance by 24.9% and 55.5% of the costs under traditional techniques, respectively. Such a construction allowed an enrichment and concentration of nutrients in the soils of terrace bunds, providing an ideal environment for a range of plants to grow and develop. The terrace riser could be planted with drought-resistant plants ranging from forage grasses to trees, and this riser vegetation would turn the exposed bunds and risers existing under traditional techniques into plant-covered belts, great green ribbons decorating farmland and contributing to the enhancement of the landscape biology.

Asymmetric Crustal Accretion Across the Carlsberg Ridge (NW Indian Ocean) since the Paleocene

NASA Astrophysics Data System (ADS)

Chaubey, A.; Kamesh Raju, K.; Bhattacharya, G.; Dyment, J.; Royer, J.

2006-12-01

We present magnetic isochron map in conjunction with satellite derived free-air gravity anomaly image of the Carlsberg Ridge to understand crustal accretion across the ridge since its inception. Well-lineated and high- amplitude magnetic anomalies C1n through C2An and C20n through C28ny have been identified across the present- and paleo-Carlsberg Ridge respectively. Average full spreading rates of ~32 km/my for the past 4.18 Ma and ~46-260 km/my during C20n-C28ny respectively have been estimated based on model studies. Analysis of magnetic anomalies reveals that crustal accretion of SW flank of the Carlsberg Ridge was greater by ~5-20% as compared to its conjugate NE flank for the last 4 Myr. Whereas, accretion due to paleo- Carlsberg Ridge, in general, was ~20% consistently greater at NE flank (now known as the Arabian Basin) compared to its conjugate SW flank (now known as the Eastern Somali Basin) during 63 43 Ma. An instance of exception to this general scenario is observed during magnetic chron 24n.1y-23n.2o period (52.4-51.7 Ma) when accretion on the SW flank of the ridge was ~10% greater as compared to its conjugate part. These results indicate that crustal accretion across the Carlsberg Ridge was substantially asymmetric and represent both small- and large-scale crustal asymmetries for the past 63 Myr (C28n). Small-scale asymmetries vary between individual spreading corridors, whereas, large-scale asymmetries represented by consistent excess accretion on one of the two separating plates from the Late Paleocene to Middle Eocene. We propose that small-scale asymmetry resulted from discrete spreading-center jumps in the inner rift valley floor; whereas, spreading ridge propagation, which dominated pre-C20n spreading history of the Carlsberg Ridge, caused large-scale asymmetric crustal accretion. Asymmetric crustal accretion across mid-ocean ridge systems is common phenomena in the geologic past but processes that lead to asymmetry are not well resolved. The

Yeast identification in floral nectar of Mimulus aurantiacus (Invited)

NASA Astrophysics Data System (ADS)

Kyauk, C.; Belisle, M.; Fukami, T.

2009-12-01

Nectar is such a sugar-rich resource that serves as a natural habitat in which microbes thrive. As a result, yeasts arrive to nectar on the bodies of pollinators such as hummingbirds and bees. Yeasts use the sugar in nectar for their own needs when introduced. This research focuses on the identification of different types of yeast that are found in the nectar of Mimulus aurantiacus (commonly known as sticky monkey-flower). Unopened Mimulus aurantiacus flower buds were tagged at Jasper Ridge and bagged three days later. Floral nectar was then extracted and plated on potato dextrose agar. Colonies on the plates were isolated and DNA was extracted from each sample using QIAGEN DNeasy Plant Mini Kit. The DNA was amplified through PCR and ran through gel electrophoresis. The PCR product was used to clone the nectar samples into an E.coli vector. Finally, a phylogenetic tree was created by BLAST searching sequences in GenBank using the Internal Transcribed Space (ITS) locus. It was found that 18 of the 50 identified species were Candida magnifica, 14 was Candida rancensis, 6 were Crytococcus albidus and there were 3 or less of the following: Starmella bombicola, Candida floricola, Aureobasidium pullulans, Pichia kluyvera, Metschnikowa cibodaserisis, Rhodotorua colostri, and Malassezia globosa. The low diversity of the yeast could have been due to several factors: time of collection, demographics of Jasper Ridge, low variety of pollinators, and sugar concentration of the nectar. The results of this study serve as a necessary first step for a recently started research project on ecological interactions between plants, pollinators, and nectar-living yeast. More generally, this research studies the use of the nectar-living yeast community as a natural microcosm for addressing basic questions about the role of dispersal and competitive and facilitative interactions in ecological succession.

Discovery of abundant hydrothermal venting on the ultraslow-spreading Gakkel ridge in the Arctic Ocean.

PubMed

Edmonds, H N; Michael, P J; Baker, E T; Connelly, D P; Snow, J E; Langmuir, C H; Dick, H J B; Mühe, R; German, C R; Graham, D W

2003-01-16

Submarine hydrothermal venting along mid-ocean ridges is an important contributor to ridge thermal structure, and the global distribution of such vents has implications for heat and mass fluxes from the Earth's crust and mantle and for the biogeography of vent-endemic organisms. Previous studies have predicted that the incidence of hydrothermal venting would be extremely low on ultraslow-spreading ridges (ridges with full spreading rates <2 cm x yr(-1)-which make up 25 per cent of the global ridge length), and that such vent systems would be hosted in ultramafic in addition to volcanic rocks. Here we present evidence for active hydrothermal venting on the Gakkel ridge, which is the slowest spreading (0.6-1.3 cm x yr(-1)) and least explored mid-ocean ridge. On the basis of water column profiles of light scattering, temperature and manganese concentration along 1,100 km of the rift valley, we identify hydrothermal plumes dispersing from at least nine to twelve discrete vent sites. Our discovery of such abundant venting, and its apparent localization near volcanic centres, requires a reassessment of the geologic conditions that control hydrothermal circulation on ultraslow-spreading ridges.

Sea ice ridging in the Ross Sea, Antarctica, as compared with sites in the Arctic

NASA Astrophysics Data System (ADS)

Weeks, W. F.; Ackley, S. F.; Govoni, J.

1989-04-01

At the end of the 1980 austral winter, surface roughness measurements were made by laser profilometer during a series of flights over the Ross Sea pack ice. The total track length was 2696 km, and 4365 ridges were counted. The frequency distribution of individual ridge heights was found to be well described by a negative exponential distribution. No clear-cut regional variation was noted in ridge heights. The distribution of ridge frequencies per kilometer showed a strong positive skew with a modal value of 1.88; the most frequent ridging occurred off the east coast of Victoria Land. Comparisons with similar data sets from the Arctic indicate that large ridges are significantly more likely in the Arctic Ocean than in the Ross Sea. Utilizing a reasonable model for the geometry of ridges, estimates are made of the average thickness of a hypothetical continuous layer composed only of the deformed ice from ridges. The noncoastal Ross Sea value of 0.09 m is less than half of the lowest comparable value from the Arctic (0.20 m, central Beaufort Sea) where values in excess of 1.0 m have been observed in the shear zones north of Greenland.

Base-flow characteristics of streams in the Valley and Ridge, the Blue Ridge, and the Piedmont physiographic provinces of Virginia

USGS Publications Warehouse

Nelms, David L.; Harlow, George E.; Hayes, Donald C.

1997-01-01

Growth within the Valley and Ridge, Blue Ridge, and Piedmont physiographic provinces of Virginia has focused concern about allocation of surface-water flow and increased demands on the ground-water resources. Potential surface-water yield was determined from statistical analysis of base-flow characteristics of streams. Base-flow characteristics also may provide a relative indication of the potential ground-water yield for areas that lack sufficient specific capacity or will-yield data; however, other factors need to be considered, such as geologic structure, lithology, precipitation, relief, and the degree of hydraulic interconnection between the regolith and bedrock.

On the origin of saline soils at Blackspring Ridge, Alberta, Canada

NASA Astrophysics Data System (ADS)

Stein, Richard; Schwartz, Franklin W.

1990-09-01

Problems of soil salinity occur at Blackspring Ridge, Alberta, in four different settings. The most seriously affected area is at the base of the ridge where salinity appears as severe salt crusting on the surface, salt-tolerant vegetation, and areas of poor or no crop production. Blackspring Ridge is a structural bedrock high that is underlain by Upper Cretaceous sediment of the Horseshoe Canyon Formation. Bedrock is overlain by fluvial, glacial, lacustrine, and aeolian sediment. Piezometric data indicate that groundwater is recharged on and along the upper flanks of Blackspring Ridge and discharges in southern parts of a lacustrine plain that surrounds the ridge. Hydraulic conductivity data, water-level fluctuations, stable isotopes, and hydrochemical data indicate that the fractured near-surface bedrock and overlying thin-drift sediment constitute a zone of active groundwater flow within which salts are generated and transported. Water discharging from this shallow system evaporates and forms saline areas at the base of the ridge. The most seriously affected areas on the lacustrine plain coincide with places where the water table is less than 1.5m from the ground surface. A high water table occurs locally because of the changing topology of geologic units, and lows in the topographic surface that focus groundwater and surface water flows. Some proportion of the shallow groundwater salinized by evaporation is also transported down the flow system where it mixes with unevaporated water. Surface water, from snowmelt and precipitation events, dissolves salt that was deposited at the surface by evaporating groundwater and redistributes the salt to areas of lower elevation.

Wrinkle ridges on Venusian plains: Indicators of shallow crustal stress orientations at local and regional scales

NASA Technical Reports Server (NTRS)

Mcgill, George E.

1992-01-01

The plains regions of Venus exhibit a complex array of structural features, including deformation belts of various types, wrinkle ridges, grabens, and enigmatic radar-bright linears. Probably the most pervasive of these structures are the wrinkle ridges, which appear to be morphologically identical to their counterparts on the Moon and Mars. Almost all workers agree that wrinkle ridges result from horizontal compressive stresses in the crust; they either are explained as flexural fold structures, or alternatively as scarps or folds related to reverse faults. Wrinkle ridges generally are narrow, have small amplitudes, and commonly are closely spaced as well, characteristics that imply a shallow crustal origin. If wrinkle ridges are due to horizontally directed compressive stresses in the shallow crust, as generally has been inferred, then the trends of these features provide a means to map both local and regional orientations of principal stresses in the uppermost part of the venusian crust: maximum compressive stress is normal to the ridges, minimum compressive stress is normal to the topographic surface, and thus the wrinkle ridge trends trace the orientation of the intermediate principal stress. Because there are few plains areas on Venus totally devoid of wrinkle ridges, it should be possible to establish a number of interesting relationships on a near-global scale by mapping the trends of wrinkle ridges wherever they occur. The present study is addressing three questions: (1) Do the trends of wrinkle ridges define domains that are large relative to the sizes of individual plains regions? If so, can these domains be related to large-scale topographic or geologic features? (2) Are regional trends of wrinkle ridges affected by local features such as coronae? If so, is it possible to determine the relative ages of the far-field and local stresses from detailed study of trend inheritance or superposition relationships? (3) What is the relationship between wrinkle

Issues relating to spent nuclear fuel storage on the Oak Ridge Reservation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klein, J.A.; Turner, D.W.

1994-12-31

Currently, about 2,800 metric tons of spent nuclear fuel (SNF) is stored in the US, 1,000 kg of SNF (or about 0.03% of the nation`s total) are stored at the US Department of Energy (DOE) complex in Oak Ridge, Tennessee. However small the total quantity of material stored at Oak Ridge, some of the material is quite singular in character and, thus, poses unique management concerns. The various types of SNF stored at Oak Ridge will be discussed including: (1) High-Flux Isotope Reactor (HFIR) and future Advanced Neutron Source (ANS) fuels; (2) Material Testing Reactor (MTR) fuels, including Bulk Shieldingmore » Reactor (BSR) and Oak Ridge Research Reactor (ORR) fuels; (3) Molten Salt Reactor Experiment (MSRE) fuel; (4) Homogeneous Reactor Experiment (HRE) fuel; (5) Miscellaneous SNF stored in Oak Ridge National Laboratory`s (ORNL`s) Solid Waste Storage Areas (SWSAs); (6) SNF stored in the Y-12 Plant 9720-5 Warehouse including Health. Physics Reactor (HPRR), Space Nuclear Auxiliary Power (SNAP-) 10A, and DOE Demonstration Reactor fuels.« less

Magma plumbing system and seismicity of an active mid-ocean ridge volcano.

PubMed

Schmid, Florian; Schlindwein, Vera; Koulakov, Ivan; Plötz, Aline; Scholz, John-Robert

2017-02-20

At mid-ocean ridges volcanism generally decreases with spreading rate but surprisingly massive volcanic centres occur at the slowest spreading ridges. These volcanoes can host unexpectedly strong earthquakes and vigorous, explosive submarine eruptions. Our understanding of the geodynamic processes forming these volcanic centres is still incomplete due to a lack of geophysical data and the difficulty to capture their rare phases of magmatic activity. We present a local earthquake tomographic image of the magma plumbing system beneath the Segment 8 volcano at the ultraslow-spreading Southwest Indian Ridge. The tomography shows a confined domain of partial melt under the volcano. We infer that from there melt is horizontally transported to a neighbouring ridge segment at 35 km distance where microearthquake swarms and intrusion tremor occur that suggest ongoing magmatic activity. Teleseismic earthquakes around the Segment 8 volcano, prior to our study, indicate that the current magmatic spreading episode may already have lasted over a decade and hence its temporal extent greatly exceeds the frequent short-lived spreading episodes at faster opening mid-ocean ridges.

Reconstruction of Holocene changes in alpine vegetation and climate in the Maligne Range, Jasper National Park, Alberta

NASA Astrophysics Data System (ADS)

Luckman, B. H.; Kearney, M. S.

1986-09-01

Pollen, macrofossil (logs and needles), and oxygen-isotope data from tree rings are presented for three alpine bog sites in the Maligne Range of the Canadian Rockies. Organic sedimentation at the Watchtower site began prior to ca. 9500 14C yr B.P. and by 8770 yr B.P. timberlines were at least 100 m above present levels. The two pollen records are dominated by Pinus and subsequent changes in timberlines are inferred from pollen-ratio data ( Abies/Pinus) and from macrofossils. The recovered records indicate two periods of high Hypsithermal timberlines ca. 8800-7500 and 7200-5200 yr B.P. separated by a short interval ca. 7300-7400 yr B.P. when timberline approached modern levels. After ca. 4500 yr B.P. timberlines have been similar to or lower than present, reaching minimum values in the last 500 yr. δ 18O determinations from the α-cellulose of samples of 5 or 10 annual rings cut from contemporary Picea englemannii at timberline show strong correlations with mean annual temperatures at Jasper. Isotopic determinations from Hypsithermal-age logs recovered from sites above present timberline indicate mean annual temperatures were at least 0.5°C warmer ca. 8060 and 8770 yr B.P. than at present at the Watchtower site. Data from logs at the Maligne Pass site suggest that temperatures were about 1.2° and 1.6°C warmer ca. 6000 and 5300 yr B.P. Estimates of temperature from the pollen-ratio data are more conservative and suggest maximum differences of ca. 1.0°C in July temperatures over the last 8000 yr.

Geochemistry of lavas from the Australian-Antarctic Ridge, easternmost Southeast Indian Ridge

NASA Astrophysics Data System (ADS)

Park, S.; Langmuir, C. H.; Lin, J.; Kim, S.; Hahm, D.; Michael, P. J.; Baker, E. T.

2012-12-01

The intermediate spreading Australian-Antarctic Ridge (AAR), an easternmost extension of the South East Indian Ridge located in the south of Tasmania, is one of the largest unexplored regions of the global mid-ocean ridge system, owing to its remote location and a very limited workable weather window. In early and late 2011, the Korea Polar Research Institute (KOPRI) conducted two surveys of two segments at 160°E (KR1) and 152.5°E (KR2) using the icebreaker Araon, producing a multi-beam map, 48 rock core samples and a MAPR (Miniature Autonomous Plume Recorder) hydrothermal survey. The full spreading rate of the spreading center in this area is 68 mm/yr. The axial depth of KR1 is relatively shallow (~2,000m) and is a first-order segment bounded by two large offset transform faults. The axial morphology of KR1 varies substantially from an axial high plateau (Segment 1) in the west, to a small rift valley (Segment 2), to an axial high with graben (Segment 3), and to a substantial rift valley (Segment 4) in the east. These changes occur in the absence of marked offsets in the ridge, such as overlapping spreading centers. Even so, these segments can be divided still further into shorter scale segments based on small discontinuities in the linearity of the axis and variations in rock chemistry. Small offsets in bathymetry can be associated with large chemical changes, such as between Segments 2 and 3, where incompatible element abundances change by almost a factor of ten. Incompatible trace element ratios for basalts show a regular pattern that is nonetheless not a single gradient. Along Segments 1 and 2, an axial high changes to a modest rift, (La/Sm)N of basalts decreases from 0.9 to 0.5. Then there is an abrupt step in enrichment to (La/Sm)N of 1.5, associated with a shallower depths and the appearance of an off-axis seamount south of the axis. This enrichment persists eastwards and then declines progressively to values of (La/Sm)N of 0.7 in the pronounced rift

Dating the growth of oceanic crust at a slow-spreading ridge

USGS Publications Warehouse

Schwartz, J.J.; John, Barbara E.; Cheadle, Michael J.; Miranda, E.A.; Grimes, Craig B.; Wooden, J.L.; Dick, H.J.B.

2005-01-01

Nineteen uranium-lead zircon ages of lower crustal gabbros from Atlantis Bank, Southwest Indian Ridge, constrain the growth and construction of oceanic crust at this slow-spreading midocean ridge. Approximately 75% of the gabbros accreted within error of the predicted seafloor magnetic age, whereas ???25% are significantly older. These anomalously old samples suggest either spatially varying stochastic intrusion at the ridge axis or, more likely, crystallization of older gabbros at depths of ???5 to 18 kilometers below the base of crust in the cold, axial lithosphere, which were uplifted and intruded by shallow-level magmas during the creation of Atlantis Bank.

Pine Ridge Indian Health Service Primary Care Resident Rotation: an update.

PubMed

Vogt, H B; Jerde, O M

1994-04-01

The Pine Ridge Indian Health Service Primary Care Resident Rotation has been in existence for 2 years. It was conceived in an effort to help address the problem of recruitment and retention of physicians at Pine Ridge in the long term, while offering a unique educational experience for primary care residents. Twenty-five residents from family practice, general internal medicine, and general pediatric residency programs across the country have participated in calendar years 1992 and 1993. Three of the original 12 residents have returned following completion of their residency programs to join the Pine Ridge medical staff.

U-Series Disequilibria across the New Southern Ocean Mantle Province, Australian-Antarctic Ridge

NASA Astrophysics Data System (ADS)

Scott, S. R.; Sims, K. W. W.; Park, S. H.; Langmuir, C. H.; Lin, J.; Kim, S. S.; Blichert-Toft, J.; Michael, P. J.; Choi, H.; Yang, Y. S.

2017-12-01

Mid-ocean ridge basalts (MORB) provide a unique window into the temporal and spatial scales of mantle evolution. Long-lived radiogenic isotopes in MORB have demonstrated that the mantle contains many different chemical components or "flavors". U-series disequilibria in MORB have further shown that different chemical components/lithologies in the mantle contribute differently to mantle melting processes beneath mid-ocean ridges. Recent Sr, Nd, Hf, and Pb isotopic analyses from newly collected basalts along the Australian-Antarctic Ridge (AAR) have revealed that a large distinct mantle province exists between the Australian-Antarctic Discordance and the Pacific-Antarctic Ridge, extending from West Antarctica and Marie Byrd Land to New Zealand and Eastern Australia (Park et al., submitted). This southern mantle province is located between the Indian-type mantle and the Pacific-type mantle domains. U-series measurements in the Southeast Indian Ridge and East Pacific Rise provinces show distinct signatures suggestive of differences in melting processes and source lithology. To examine whether the AAR mantle province also exhibits different U-series systematics we have measured U-Th-Ra disequilibria data on 38 basalts from the AAR sampled along 500 km of ridge axis from two segments that cross the newly discovered Southern Ocean Mantle province. We compare the data to those from nearby ridge segments show that the AAR possesses unique U-series disequilibria, and are thus undergoing distinct mantle melting dynamics relative to the adjacent Pacific and Indian ridges. (230Th)/(238U) excesses in zero-age basalts (i.e., those with (226Ra)/(230Th) > 1.0) range from 1.3 to 1.7, while (226Ra)/(230Th) ranges from 1.0 to 2.3. (226Ra)/(230Th) and (230Th)/(238U) are negatively correlated, consistent with the model of mixing between deep and shallow melts. The AAR data show higher values of disequilibria compared to the Indian and Pacific Ridges, which can be explained by either

Gravitational spreading of steep-sided ridges ("sackung") in Western United States

USGS Publications Warehouse

Radbruch-Hall, D. H.; Varnes, D.J.; Savage, W.Z.

1976-01-01

Large-scale gravitational spreading and movement along fractures of steep-sided ridges in the mountainous areas of the western United States are characterized by linear fissures, trenches, and uphill-facing scarps on tops and sides of ridges. Spreading appears to take place by movement along disconnected planes and/or by slow plastic deformation of a rock mass. In some places, valleyward squeezing out of weak shales overlain by rigid rocks causes extensional fracturing and outward movement of the rigid layers, as illustrated by extension of two laccoliths overlying Mancos Shale, one at Dolores Peak and another at Crested Butte in western Colorado. Gravitational forces acting on a ridge of more homogeneous material causes tensional spreading of the ridge parallel to its long axis, for example in fractured granitic rock north of Mt. Massive in central Colorado, where a survey course has been established to monitor the movement. Recognition and understanding of these large-scale gravitational features and the mechanism that causes them are pertinent to site selection and design of engineering structures in high mountains. If fractures extend to considerable depth and if movement is continuing, engineering structures in valleys or tunnels through the spreading ridges could be damaged. ?? 1976 International Association of Engineering Geology.

Reconstructing paleo-discharge from geometries of fluvial sinuous ridges on Earth and Mars

NASA Astrophysics Data System (ADS)

Hayden, A.; Lamb, M. P.; Mohrig, D. C.; Williams, R. M. E.; Myrow, P.; Ewing, R. C.; Cardenas, B. T.; Findlay, C. P., III

2017-12-01

Sinuous, branching networks of topographic ridges resembling river networks are common across Mars, and show promise for quantifying ancient martian surface hydrology. There are two leading formation mechanisms for ridges with a fluvial origin. Inverted channels are ridges that represent casts (e.g., due to lava fill) of relict river channel topography, whereas exhumed channel deposits are eroded remnants of a more extensive fluvial deposit, such as a channel belt. The inverted channel model is often assumed on Mars; however, we currently lack the ability to distinguish these ridge formation mechanisms, motivating the need for Earth-analog study. To address this issue, we studied the extensive networks of sinuous ridges in the Ebro basin of northeast Spain. The Ebro ridges stand 3-15 meters above the surrounding plains and are capped by a cliff-forming sandstone unit 3-10 meters thick and 20-50 meters in breadth. The caprock sandstone bodies contain bar-scale cross stratification, point-bar deposits, levee deposits, and lenses of mudstone, indicating that these are channel-belt deposits, rather than casts of channels formed from lateral channel migration, avulsion and reoccupation. In plan view, ridges form segments branching outward to the north resembling a distributary network; however, crosscutting relationships indicate that ridges cross at different stratigraphic levels. Thus, the apparent network in planview reflects non-uniform exhumation of channel-belt deposits from multiple stratigraphic positions, rather than an inverted coeval river network. As compared to the inverted channel model, exhumed fluvial deposits indicate persistent fluvial activity over geologic timescales, indicating the potential for long-lived surface water on ancient Mars.

Mantle plume capture, anchoring, and outflow during Galápagos plume-ridge interaction

NASA Astrophysics Data System (ADS)

Gibson, S. A.; Geist, D. J.; Richards, M. A.

2015-05-01

Compositions of basalts erupted between the main zone of Galápagos plume upwelling and adjacent Galápagos Spreading Center (GSC) provide important constraints on dynamic processes involved in transfer of deep-mantle-sourced material to mid-ocean ridges. We examine recent basalts from central and northeast Galápagos including some that have less radiogenic Sr, Nd, and Pb isotopic compositions than plume-influenced basalts (E-MORB) from the nearby ridge. We show that the location of E-MORB, greatest crustal thickness, and elevated topography on the GSC correlates with a confined zone of low-velocity, high-temperature mantle connecting the plume stem and ridge at depths of ˜100 km. At this site on the ridge, plume-driven upwelling involving deep melting of partially dehydrated, recycled ancient oceanic crust, plus plate-limited shallow melting of anhydrous peridotite, generate E-MORB and larger amounts of melt than elsewhere on the GSC. The first-order control on plume stem to ridge flow is rheological rather than gravitational, and strongly influenced by flow regimes initiated when the plume was on axis (>5 Ma). During subsequent northeast ridge migration material upwelling in the plume stem appears to have remained "anchored" to a contact point on the GSC. This deep, confined NE plume stem-to-ridge flow occurs via a network of melt channels, embedded within the normal spreading and advection of plume material beneath the Nazca plate, and coincides with locations of historic volcanism. Our observations require a more dynamically complex model than proposed by most studies, which rely on radial solid-state outflow of heterogeneous plume material to the ridge.

High resolution bathymetric and sonar images of a ridge southeast of Terceira Island (Azores plateau)

NASA Astrophysics Data System (ADS)

Lourenço, N.; Miranda, J. M.; Luis, J.; Silva, I.; Goslin, J.; Ligi, M.

2003-04-01

The Terceira rift is a oblique ultra-slow spreading system where a transtensive regime results from differential movement between Eurasian and African plates. So far no classical ridge segmentation pattern has here been observed. The predominant morphological features are fault controlled rhombic shaped basins and volcanism related morphologies like circular seamounts and volcanic ridges. We present SIMRAD EM300 (bathymetry + backscatter) images acquired over one of these ridges located SE of Terceira Island, during the SIRENA cruise (PI J. Goslin), which complements previous TOBI mosaics performed over the same area during the AZZORRE99 cruise (PI M. Ligi). The ridge presents a NW-SE orientation, it is seismically active (a seismic crisis was documented in 1997) and corresponds to the southern branch of a V shape bathymetric feature enclosing the Terceira Island and which tip is located west of the Island near the 1998 Serreta ridge eruption site. NE of the ridge, the core of the V, corresponds to the North Hirondelle basin. All this area corresponds mainly to Brunhes magnetic epoch. The new bathymetry maps reveal a partition between tectonic processes, centred in the ridge, and volcanism present at the bottom of the North Hirondelle basin. The ridge high backscatter surface is cut by a set of sub-parallel anastomosed normal faults striking between N130º and N150º. Some faults present horse-tail terminations. Fault splays sometimes link to neighbour faults defining extensional duplexes and fault wedge basins and highs of rhombic shape. The faulting geometry suggests that a left-lateral strike slip component should be present. The top of the ridge consists on an arched demi-.horst, and it is probably a volcanic structure remnant (caldera system?), existing prior to onset of the tectonic stage in the ridge. Both ridge flanks display gullies and mass wasting fans at the base of the slope. The ridge vicinities are almost exclusively composed of a grayish homogeneous

Agulhas Ridge, South Atlantic: the peculiar structure of a transform fault

NASA Astrophysics Data System (ADS)

Uenzelmann-Neben, G.; Gohl, K.

2003-04-01

Transform faults constitute conservative plate boundaries, where adjacent plates are in tangential contact. Transform faults in the ocean are marked by fracture zones, which are long, linear, bathymetric depressions. One of the largest transform offsets on Earth can be found in the South Atlantic. The 1200 km long Agulhas Falkland Fracture Zone (AFFZ), form by this, developed during the Early Cretaceous break-up of West Gondwana. Between approx. 41°S, 16°E and 43°S, 9°E the Agulhas Falkland Fracture Zone is characterised by a pronounced topographic anomaly, the Agulhas Ridge. The Agulhas Ridge rises more than 2 km above the surrounding seafloor. The only equivalent to this kind of topographic high, as part of the AFFZ, is found in form of marginal ridges along the continental parts of the fracture zone, namely the Falkland Escarpment at the South American continent and the Diaz Ridge adjacent to South Africa. But the Agulhas Ridge differs from both the Falkland Escarpment and the Diaz Ridge in the facts (1) that it was not formed during the early rift-drift phase, and (2) that it separates oceanic crust of different age and not continental from oceanic crust. A set of high-resolution seismic reflection data (total length 2000 km) and a seismic refraction line across the Agulhas Ridge give new information on the crustal and basement structure of this tectonic feature. We have observed that within the Cape Basin, to the North, the basement and sedimentary layers are in parts strongly deformed. We observe basement highs, which point towards intrusions. Both the basement and the sedimentary sequence show strong faulting. This points towards a combined tectono-magmatic activity, which led to the formation of basement ridges parallel to the Agulhas Ridge. Since at least the pre-Oligocene parts and, locally, the whole sedimentary column are affected we infer that the renewed activity began in the Middle Oligocene and may have lasted into the Quaternary. As an origin

Data sharing report characterization of population 7: Personal protective equipment, dry active waste, and miscellaneous debris, surveillance and maintenance project Oak Ridge National Laboratory Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harpenau, Evan M.

2013-10-10

The U.S. Department of Energy (DOE) Oak Ridge Office of Environmental Management (EM-OR) requested that Oak Ridge Associated Universities (ORAU), working under the Oak Ridge Institute for Science and Education (ORISE) contract, provide technical and independent waste management planning support under the American Recovery and Reinvestment Act (ARRA). Specifically, DOE EM-OR requested that ORAU plan and implement a sampling and analysis campaign targeting certain URS|CH2M Oak Ridge, LLC (UCOR) surveillance and maintenance (S&M) process inventory waste. Eight populations of historical and reoccurring S&M waste at the Oak Ridge National Laboratory (ORNL) have been identified in the Waste Handling Plan formore » Surveillance and Maintenance Activities at the Oak Ridge National Laboratory, DOE/OR/01-2565&D2 (WHP) (DOE 2012) for evaluation and processing to determine a final pathway for disposal. Population 7 (POP 7) consists of 56 containers of aged, low-level and potentially mixed S&M waste that has been staged in various locations around ORNL. Several of these POP 7 containers primarily contain personal protective equipment (PPE) and dry active waste (DAW), but may contain other miscellaneous debris. This data sharing report addresses the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) specified waste in a 13-container subpopulation (including eight steel boxes, three 55-gal drums, one sealand, and one intermodal) that lacked sufficient characterization data for possible disposal at the Environmental Management Waste Management Facility (EMWMF) using the approved Waste Lot (WL) 108.1 profile.« less

Variability of footprint ridge density and its use in estimation of sex in forensic examinations.

PubMed

Krishan, Kewal; Kanchan, Tanuj; Pathania, Annu; Sharma, Ruchika; DiMaggio, John A

2015-10-01

The present study deals with a comparatively new biometric parameter of footprints called footprint ridge density. The study attempts to evaluate sex-dependent variations in ridge density in different areas of the footprint and its usefulness in discriminating sex in the young adult population of north India. The sample for the study consisted of 160 young adults (121 females) from north India. The left and right footprints were taken from each subject according to the standard procedures. The footprints were analysed using a 5 mm × 5 mm square and the ridge density was calculated in four different well-defined areas of the footprints. These were: F1 - the great toe on its proximal and medial side; F2 - the medial ball of the footprint, below the triradius (the triradius is a Y-shaped group of ridges on finger balls, palms and soles which forms the basis of ridge counting in identification); F3 - the lateral ball of the footprint, towards the most lateral part; and F4 - the heel in its central part where the maximum breadth at heel is cut by a perpendicular line drawn from the most posterior point on heel. This value represents the number of ridges in a 25 mm(2) area and reflects the ridge density value. Ridge densities analysed on different areas of footprints were compared with each other using the Friedman test for related samples. The total footprint ridge density was calculated as the sum of the ridge density in the four areas of footprints included in the study (F1 + F2 + F3 + F4). The results show that the mean footprint ridge density was higher in females than males in all the designated areas of the footprints. The sex differences in footprint ridge density were observed to be statistically significant in the analysed areas of the footprint, except for the heel region of the left footprint. The total footprint ridge density was also observed to be significantly higher among females than males. A statistically significant correlation

Wrinkle ridges on Mars: Absence of décollement tectonics

NASA Astrophysics Data System (ADS)

Schultz, Richard; Nahm, Amanda; Montési, Laurent

2010-05-01

Wrinkle ridges, anticlines formed above blind thrust faults, are common structures on the terrestrial planets. Domains of wrinkle ridges on Mars and Venus are characterized by approximately regular spacings to form distributed arrays of low-strain folds across large areas. Precision topographic data for Mars demonstrate both very low regional slopes across wrinkle-ridged terranes such as Solis and Hesperia Plana (<0.5°) and vergence directions for the subjacent blind thrust faults equally up- and down-slope, implying that gravity-induced sliding was not a significant factor in wrinkle ridge deformation. We test the long-standing assumption that wrinkle ridges are associated with slip along a common basal décollement. Critical taper wedge mechanics, used in this analysis, relates décollement strength to the strength and cross-sectional geometry of the deforming stratigraphic section; slip along the décollement occurs once the section has deformed into a critical wedge-shaped taper. By using measured topography across Solis Planum (regional slope of 0.2°) with plausible values of stratigraphic properties (strength, density, pore fluid pressures) we show that décollement dip angles as low as 1-2° may be possible, but only for restricted conditions including nearly frictionless stratigraphic contacts. The lowest décollement slopes require a near-zero coefficient of friction on the décollement, implying either near-lithostatic pore fluid pressure or a horizon of intrinsically weak material. The weakest material that can be justified at the inferred décollement depth is water-saturated talc, with a coefficient of friction of 0.15. High pore fluid pressure requires a steady supply of water, typically provided on Earth by sediment compaction and clay dewatering, to replenish the fluids lost though the wedge. Its presence at Solis Planum would imply that a sediment layer lies buried underneath the near-surface basaltic unit; rapid emplacement of massive flood

Seismic subduction of the Nazca Ridge as shown by the 1996-97 Peru earthquakes

USGS Publications Warehouse

Spence, W.; Mendoza, C.; Engdahl, E.R.; Choy, G.L.; Norabuena, E.

1999-01-01

By rupturing more than half of the shallow subduction interface of the Nazca Ridge, the great November 12, 1996 Peruvian earthquake contradicts the hypothesis that oceanic ridges subduct aseismically. The mainshock's rupture has a length of about 200 km and has an average slip of about 1.4 m. Its moment is 1.5 x 1028 dyne-cm and the corresponding M(w) is 8.0. The mainshock registered three major episodes of moment release as shown by a finite fault inversion of teleseismically recorded broadband body waves. About 55% of the mainshock's total moment release occurred south of the Nazca Ridge, and the remaining moment release occurred at the southern half of the subduction interface of the Nazca Ridge. The rupture south of the Nazca Ridge was elongated parallel to the ridge axis and extended from a shallow depth to about 65 km depth. Because the axis of the Nazca Ridge is at a high angle to the plate convergence direction, the subducting Nazca Ridge has a large southwards component of motion, 5 cm/yr parallel to the coast. The 900-1200 m relief of the southwards sweeping Nazca Ridge is interpreted to act as a 'rigid indenter,' causing the greatest coupling south of the ridge's leading edge and leading to the large observed slip. The mainshock and aftershock hypocenters were relocated using a new procedure that simultaneously inverts local and teleseismic data. Most aftershocks were within the outline of the Nazca Ridge. A three-month delayed aftershock cluster' occurred at the northern part of the subducting Nazca Ridge. Aftershocks were notably lacking at the zone of greatest moment release, to the south of the Nazca Ridge. However, a lone foreshock at the southern end of this zone, some 140 km downstrike of the mainshock's epicenter, implies that conditions existed for rupture into that zone. The 1996 earthquake ruptured much of the inferred source zone of the M(w) 7.9-8.2 earthquake of 1942, although the latter was a slightly larger earthquake. The rupture zone of

The Relationships of Upper Plate Ridge-Trench-Trench and Ridge-Trench-Transform Triple Junction Evolution to Arc Lengthening, Subduction Zone initiation and Ophiolitic Forearc Obduction

NASA Astrophysics Data System (ADS)

Casey, J.; Dewey, J. F.

2013-12-01

The principal enigma of large obducted ophiolite slabs is that they clearly must have been generated by some form of organized sea-floor spreading/plate-accretion, such as may be envisioned for the oceanic ridges, yet the volcanics commonly have arc affinity (Miyashiro) with boninites (high-temperature/low-pressure, high Mg and Si andesites), which are suggestive of a forearc origin. PT conditions under which boninites and metamorphic soles form and observations of modern forearc systems lead us to the conclusion that ophiolite formation is associated with overriding plate spreading centers that intersect the trench to form ridge-trench-trench of ridge-trench-tranform triple junctions. The spreading centers extend and lengthen the forearc parallel to the trench and by definition are in supra-subduction zone (SSZ) settings. Many ophiolites likewise have complexly-deformed associated mafic-ultramafic assemblages that suggest fracture zone/transform along their frontal edges, which in turn has led to models involving the nucleation of subduction zones on fracture zones or transpressional transforms. Hitherto, arc-related sea-floor-spreading has been considered to be either pre-arc (fore-arc boninites) or post-arc (classic Karig-style back arc basins that trench-parallel split arcs). Syn-arc boninites and forearc oceanic spreading centers that involve a stable ridge/trench/trench triple or a ridge-trench-transform triple junction, the ridge being between the two upper plates, are consistent with large slab ophiolite formation in an obduction-ready settting. The direction of subduction must be oblique with a different sense in the two subduction zones and the oblique subduction cannot be partitioned into trench orthogonal and parallel strike-slip components. As the ridge spreads, new oceanic lithosphere is created within the forearc, the arc and fore-arc lengthen significantly, and a syn-arc ophiolite forearc complex is generated by this mechanism. The ophiolite ages

Rediscovery and Exploration of Magic Mountain, Explorer Ridge, NE Pacific

NASA Astrophysics Data System (ADS)

Embley, R. W.

2002-12-01

either centered within the neovolcanic zone or associated with a boundary fault. The active venting occurs over at least 400 m along axis and is mostly concentrated in clusters of high temperature chimneys, each about 50 m in diameter. Two of these clusters have a basal sulfide mound. There is obvious structural control of many of the vents - many lie along or in line with distinct fissures or small faults and the entire field appears to have developed within a shallow graben formed on the ridge flank. Most of the chimneys consist of relatively friable sulfates (barite/anhydrite) that vent clear fluid at up to about 290°C. Several larger active chimneys consist primarily of sulfide minerals that emit gray smoke with temperatures as high as 312§ C. Biologic communities were primarily associated with the more stable sulfide structures. The mixture of proven technology used from a capable surface vessel during the 2002 Explorer Ridge program, including a cutting edge deep AUV and a large ROV, provided the tools to explore a little-known site at a full range of scales in a short amount of time and collect invaluable samples for research. These initial data sets from the 2002 exploration program set the stage for more detailed studies of this unique hydrothermal system in the future.

Effects of diesel exhaust on influenza-induced nasal inflammation

EPA Science Inventory

Title: Effects of Diesel Exhaust on Influenza-Induced Nasal Inflammation T L Noah, MD1,2, K Horvath, BS3, C Robinette, RN2, 0 Diaz Sanchez, PhD4 and I Jaspers, PhD1,2. 1UNC Dept. of Pediatrics, United States; 2UNC Center for Environmental Medicine, Asthma and Lung Biology, ...

Fluvial Channel Networks as Analogs for the Ridge-Forming Unit, Sinus Meridiani, Mars

NASA Technical Reports Server (NTRS)

Wilkinson, M. J.; du Bois, J. B.

2010-01-01

Fluvial models have been generally discounted as analogs for the younger layered rock units of Sinus Meridiani. A fluvial model based on the large fluvial fan provides a possibly close analog for various features of the sinuous ridges of the etched, ridge-forming unit (RFU) in particular. The close spacing of the RFU ridges, their apparently chaotic orientations, and their organization in dense networks all appear unlike classical stream channel patterns. However, drainage patterns on large fluvial fans low-angle, fluvial aggradational features, 100s of km long, documented worldwide by us provide parallels. Some large fan characteristics resemble those of classical floodplains, but many differences have been demonstrated. One major distinction relevant to the RFU is that channel landscapes of large fans can dominate large areas (1.2 million km2 in one S. American study area). We compare channel morphologies on large fans in the southern Sahara Desert with ridge patterns in Sinus Meridiani (fig 1). Stream channels are the dominant landform on large terrestrial fans: they may equate to the ubiquitous, sinuous, elongated ridges of the RFU that cover areas region wide. Networks of convergent/divergent and crossing channels may equate to similar features in the ridge networks. Downslope divergence is absent in channels of terrestrial upland erosional landscapes (fig. 1, left), whereas it is common to both large fans (fig. 1, center) and RFU ridge patterns (fig 1, right downslope defined as the regional NW slope of Sinus Meridiani). RFU ridge orientation, judged from those areas apparently devoid of impact crater control, is broadly parallel with the regional slope (arrow, fig. 1, right), as is mean orientation of major channels on large fans (arrow, fig. 1, center). High densities per unit area characterize fan channels and martian ridges reaching an order of magnitude higher than those in uplands just upstream of the terrestrial study areas fig. 1. In concert with

Looking Up at Layers of 'Vera Rubin Ridge' on Sol 1790

NASA Image and Video Library

2017-09-13

The Mast Camera (Mastcam) on NASA's Curiosity Mars rover captured this view of "Vera Rubin Ridge" about two weeks before the rover started ascending this steep ridge on lower Mount Sharp. The view combines 13 images taken with the Mastcam's right-eye, telephoto-lens camera, on Aug. 19, 2017, during the 1,790th Martian day, or sol, of Curiosity's work on Mars. This and other Mastcam panoramas show details of the sedimentary rocks that make up the "Vera Rubin Ridge." This distinct topographic feature located on the lower slopes of Mount Sharp (Aeolis Mons) is characterized by the presence of hematite, an iron-oxide mineral, which has been detected from orbit. The Mastcam images show that the rocks making up the lower part of the ridge are characterized by distinct horizontal stratification with individual rock layers of the order of several inches (tens of centimeters) thick. Scientists on the mission are using such images to determine the ancient environment these rocks were deposited in. The repeated beds indicate progressive accumulation of sediments that now make up the lower part of Mount Sharp, although from this distance it is not possible to know if they were formed by aqueous or wind-blown processes. Close-up images collected as the rover climbs the ridge will help answer this question. The stratified rocks are cross cut by veins filled with a white mineral, likely calcium sulfate, that provide evidence of later episodes of fluid flow through the rocks. The panorama has been white-balanced so that the colors of the rock materials resemble how they would appear under daytime lighting conditions on Earth. It spans about 55 compass degrees centered to the south-southeast. The Sol 1790 location just north of the ridge is shown in a Sol 1789 traverse map. The ridge was informally named in early 2017 in memory of Vera Cooper Rubin (1928-2016), whose astronomical observations provided evidence for the existence of the universe's dark matter. An annotated figure is

Geophysical Investigation of Upper Mantle Anomalies of the Australian-Antarctic Ridge

NASA Astrophysics Data System (ADS)

Park, S. H.; Choi, H.; Kim, S. S.; Lin, J.

2017-12-01

Australian-Antarctic Ridge (AAR) is situated between the Pacific-Antarctic Ridge (PAR) and Southeast Indian Ridge (SEIR), extending eastward from the Australian-Antarctic Discordance (AAD). Much of the AAR has been remained uncharted until 2011 because of its remoteness and harsh weather conditions. Since 2011, four multidisciplinary expeditions initiated by the Korea Polar Research Institute (KOPRI) have surveyed the little-explored eastern ends of the AAR and investigated the tectonics, geochemistry, and hydrothermal activity of this intermediate spreading system. Recent isotope studies using the new basalt samples from the AAR have led to the new hypothesis of the Southern Ocean mantle domain (SOM), which may have originated from the super-plume activity associated with the Gondwana break-up. In this study, we characterize the geophysics of the Southern Ocean mantle using the newly acquired shipboard bathymetry and available geophysical datasets. First, we computed residual mantle Bouguer gravity anomalies (RMBA), gravity-derived crustal thickness, and residual topography along the AAR in order to obtain a geological proxy for regional variations in magma supply. The results of these analyses revealed that the southern flank of the AAR is associated with shallower seafloor, more negative RMBA, thicker crust, and/or less dense mantle in comparison to the conjugate northern flank. Furthermore, this north-south asymmetry becomes more prominent toward the central ridge segments of the AAR. Interestingly, the along-axis depths of the entire AAR are significantly shallower than the neighboring ridge systems and the global ridges of intermediate spreading rates. Such shallow depths are also correlated with regional negative geoid anomalies. Furthermore, recent mantle tomography models consistently showed that the upper mantle (< 250 km) below the AAR has low S-wave velocities, suggesting that it may be hotter than the nearby ridges. Such regional-scale anomalies of the

European temperature responses to blocking and ridge regional patterns

NASA Astrophysics Data System (ADS)

Sousa, Pedro M.; Trigo, Ricardo M.; Barriopedro, David; Soares, Pedro M. M.; Santos, João A.

2018-01-01

Blocking occurrence and its impacts on European temperature have been studied in the last decade. However, most previous studies on blocking impacts have focused on winter only, disregarding its fingerprint in summer and differences with other synoptic patterns that also trigger temperature extremes. In this work, we provide a clear distinction between high-latitude blocking and sub-tropical ridges occurring in three sectors of the Euro-Atlantic region, describing their climatology and consequent impacts on European temperature during both winter and summer. Winter blocks (ridges) are generally associated to colder (warmer) than average conditions over large regions of Europe, in some areas with anomalies larger than 5 °C, particularly for the patterns occurring in the Atlantic and Central European sectors. During summer, there is a more regional response characterized by above average temperature for both blocking and ridge patterns, especially those occurring in continental areas, although negative temperature anomalies persist in southernmost areas during blocking. An objective analysis of the different forcing mechanisms associated to each considered weather regime has been performed, quantifying the importance of the following processes in causing the temperature anomalies: horizontal advection, vertical advection and diabatic heating. While during winter advection processes tend to be more relevant to explain temperature responses, in summer radiative heating under enhanced insolation plays a crucial role for both blocking and ridges. Finally, the changes in the distributions of seasonal temperature and in the frequencies of extreme temperature indices were also examined for specific areas of Europe. Winter blocking and ridge patterns are key drivers in the occurrence of regional cold and warm extreme temperatures, respectively. In summer, they are associated with substantial changes in the frequency of extremely warm days, but with different signatures in

Extinct mid-ocean ridges and insights on the influence of hotspots at divergent plate boundaries

NASA Astrophysics Data System (ADS)

MacLeod, Sarah; Dietmar Müller, R.; Williams, Simon; Matthews, Kara

2016-04-01

We review all global examples of confirmed or suspected extinct mid-ocean ridges that are preserved in present-day ocean basins. Data on their spreading rate prior to extinction, time of cessation, length of activity, bathymetric and gravity signature are analysed. This analysis identifies some differences between subgroups of extinct ridges, including microplate spreading ridges, back-arc basin ridges and large-scale mid-ocean ridges. Crustal structure of extinct ridges is evaluated using gravity inversion to seek to resolve a long-standing debate on whether the final stages of spreading leads to development of thinned or thickened crust. Most of the ridges we assess have thinner crust at their axes than their flanks, yet a small number are found to have a single segment that is overprinted by an anomalous feature such as a seamount or volcanic ridge. A more complex cessation mechanism is necessary in these cases. The location of spreading centres at their time of cessation relative to hotspots was also evaluated using a global plate reconstruction. This review provides strong evidence for the long-term interaction of spreading centres with hotspots and plate boundaries have been frequently modified within the radius of a hotspot zone of influence.

Pine Ridge Fire summary report

Treesearch

Hannah Brenkert-Smith; Sarah McCaffrey; Melanie Stidham

2013-01-01

In July 2012, immediately after the Pine Ridge Fire burned outside De Beque, Colorado, a team of researchers interviewed fire managers, local government officials, and residents to understand perceptions of the event itself, communication, evacuation, and pre-fire preparedness in order to identify contributors to success and areas for improvement. Although the fire had...

Earthquake swarms on the Mid-Atlantic Ridge - Products of magmatism or extensional tectonics?

NASA Technical Reports Server (NTRS)

Bergman, Eric A.; Solomon, Sean C.

1990-01-01

The spatial and temporal patterns and other characteristics of earthquakes in 34 earthquake swarms on the Mid-Atlantic Ridge were compared with those of well-studied earthquake swarms which accompany terrestrial volcanic eruptions, to test the assumption that the teleseismically observed earthquake swarms along mid-ocean ridges are indicators of volcanism. Improved resolution of these patterns for the mid-ocean ridge events was achieved by a multiple-event relocation technique. It was found that the teleseismically located earthquake swarms on the mid-ocean ridge system have few features in common with swarms directly associated with active magmatism in terrestrial volcanic rift zones such as Hawaii and Iceland. While the possibility that some of the mid-ocean earthquake swarms might be directly associated with a current episode of eruptive activity on the Mid-Atlantic Ridge cannot be excluded, none of the 34 swarms studied in this work was found to be a conspicuously attractive candidate for such a role.

Buckling of an Elastic Ridge: Competition between Wrinkles and Creases

NASA Astrophysics Data System (ADS)

Lestringant, C.; Maurini, C.; Lazarus, A.; Audoly, B.

2017-04-01

We investigate the elastic buckling of a triangular prism made of a soft elastomer. A face of the prism is bonded to a stiff slab that imposes an average axial compression. We observe two possible buckling modes which are localized along the free ridge. For ridge angles ϕ below a critical value ϕ⋆≈9 0 ° , experiments reveal an extended sinusoidal mode, while for ϕ above ϕ⋆, we observe a series of creases progressively invading the lateral faces starting from the ridge. A numerical linear stability analysis is set up using the finite-element method and correctly predicts the sinusoidal mode for ϕ ≤ϕ⋆, as well as the associated critical strain ɛc(ϕ ). The experimental transition at ϕ⋆ is found to occur when this critical strain ɛc(ϕ ) attains the value ɛc(ϕ⋆)=0.44 corresponding to the threshold of the subcritical surface creasing instability. Previous analyses have focused on elastic crease patterns appearing on planar surfaces, where the role of scale invariance has been emphasized; our analysis of the elastic ridge provides a different perspective, and reveals that scale invariance is not a sufficient condition for localization.

Using ridge regression in systematic pointing error corrections

NASA Technical Reports Server (NTRS)

Guiar, C. N.

1988-01-01

A pointing error model is used in the antenna calibration process. Data from spacecraft or radio star observations are used to determine the parameters in the model. However, the regression variables are not truly independent, displaying a condition known as multicollinearity. Ridge regression, a biased estimation technique, is used to combat the multicollinearity problem. Two data sets pertaining to Voyager 1 spacecraft tracking (days 105 and 106 of 1987) were analyzed using both linear least squares and ridge regression methods. The advantages and limitations of employing the technique are presented. The problem is not yet fully resolved.

Sedimentary Framework of an Inner Continental Shelf Sand-Ridge System, West-Central Florida

NASA Astrophysics Data System (ADS)

Locker, S. D.; Hine, A. C.; Wright, A. K.; Duncan, D. S.

2002-12-01

The west-central Florida inner continental shelf is a dynamic environment subject to current flows on a variety of temporal and spatial scales. A site survey program, undertaken in support of the Office of Naval Research's Mine Burial prediction program, is focused on the sedimentary framework and sediment accumulation patterns in 10-18 meters water depth. Our specific goals are to image the shallow subsurface and to monitor changes in bedform distribution patterns that coincide with physical processes studies ongoing in the area. Methods of study include side-scan sonar imaging, boomer and chirp subbottom profiling, and sedimentary facies analysis using surface sediment sampling and vibracoring. A well-defined sand-ridge system was imaged, trending oblique to the west-Florida coastline. The side-scan clearly shows that there is extensive three-dimensional structure within these large-scale NW-SE trending sedimentary bedforms. The sand ridges commonly are approximately 1 km wide and 4-8 km in length. The characteristics of these ridges are distinctly different than the sand ridges in < 8 m water that we have previously studied. Ridges in the offshore area tend to be thicker, have a flatter morphology, and exhibit fewer smaller-scale sand waves. Sand-ridge thickness ranges 2-3 meters, and typically consists of fining upward medium to fine quartz sand facies with occasional centimeter-scale coarser-grained carbonate-rich intervals. Time series investigations tracking the shift in position of the sand ridge margins have found undetectable net annual movement. However significant resuspension and bedform development accompanies high-energy events such as winter cold front passage. Thus the large-scale bedforms (sand ridges) are in a state of dynamic equilibrium with the average annual hydrodynamic regime. Repeated field surveys will focus on monitoring small-scale sedimentological and stratal framework changes that will be integrated with the quantitative process

The effect of high leverage points on the logistic ridge regression estimator having multicollinearity

NASA Astrophysics Data System (ADS)

Ariffin, Syaiba Balqish; Midi, Habshah

2014-06-01

This article is concerned with the performance of logistic ridge regression estimation technique in the presence of multicollinearity and high leverage points. In logistic regression, multicollinearity exists among predictors and in the information matrix. The maximum likelihood estimator suffers a huge setback in the presence of multicollinearity which cause regression estimates to have unduly large standard errors. To remedy this problem, a logistic ridge regression estimator is put forward. It is evident that the logistic ridge regression estimator outperforms the maximum likelihood approach for handling multicollinearity. The effect of high leverage points are then investigated on the performance of the logistic ridge regression estimator through real data set and simulation study. The findings signify that logistic ridge regression estimator fails to provide better parameter estimates in the presence of both high leverage points and multicollinearity.

Pine Ridge Indian Health Service Primary Care Resident Rotation: a summary.

PubMed

Jerde, O M; Vogt, H B

1996-10-01

The Pine Ridge Indian Health Service Primary Care Resident Rotation was officially established in January 1992 and operated through May 1996. Sponsored by an Indian Health Service grant, the rotation was conceived in an effort to help address the problem of recruitment and retention of physicians at Pin Ridge in the long term, while offering a unique educational experience for residents. Fifty-eight residents from 40 Family Practice, General Internal Medicine and General Pediatric Residency Programs in 18 states completed the rotation. Four of the rotation "graduates" are currently employed by the IHS at Pine Ridge and two other sites. A fifth physician provided short term service to a fourth site.

Soil physics and chemistry at a medieval ridge and furrow site in northeastern Germany

NASA Astrophysics Data System (ADS)

Hirsch, Florian; van der Maaten-Theunissen, Marieke; van der Maaten, Ernst; Schneider, Anna; Raab, Alexandra; Raab, Thomas

2017-04-01

The usage of non-reversible ploughs, mainly during the Middle Ages and until historic times, led to the formation of ridge and furrow systems. Due to improvements of agricultural techniques, these historic agricultural sites were often abandoned and are now marginal land. The parallel ridges and furrows are usually, if not destroyed by later conventional ploughing, preserved in present-day forests. In northeastern Germany ridge and furrow systems are normally several decameters long and up to ten meters wide. The height difference between ridge top and furrow bottom is up to 50 centimeters and is expected to cause significant contrasts of soil properties and vegetation. Furthermore, due to the abandonment of sites with ridges and furrows, soils on these sites are unique archives for studies on fertilization, soil carbon dynamics and soil development. Therefore, we are characterizing soil physics (bulk density, saturated soil hydraulic conductivity, texture) and soil chemistry (soil acidity, carbon and nitrogen content) on a type location of historic ridges and furrows about 100 km northwest of Berlin.

Interaction of a mantle plume and a segmented mid-ocean ridge: Results from numerical modeling

NASA Astrophysics Data System (ADS)

Georgen, Jennifer E.

2014-04-01

Previous investigations have proposed that changes in lithospheric thickness across a transform fault, due to the juxtaposition of seafloor of different ages, can impede lateral dispersion of an on-ridge mantle plume. The application of this “transform damming” mechanism has been considered for several plume-ridge systems, including the Reunion hotspot and the Central Indian Ridge, the Amsterdam-St. Paul hotspot and the Southeast Indian Ridge, the Cobb hotspot and the Juan de Fuca Ridge, the Iceland hotspot and the Kolbeinsey Ridge, the Afar plume and the ridges of the Gulf of Aden, and the Marion/Crozet hotspot and the Southwest Indian Ridge. This study explores the geodynamics of the transform damming mechanism using a three-dimensional finite element numerical model. The model solves the coupled steady-state equations for conservation of mass, momentum, and energy, including thermal buoyancy and viscosity that is dependent on pressure and temperature. The plume is introduced as a circular thermal anomaly on the bottom boundary of the numerical domain. The center of the plume conduit is located directly beneath a spreading segment, at a distance of 200 km (measured in the along-axis direction) from a transform offset with length 100 km. Half-spreading rate is 0.5 cm/yr. In a series of numerical experiments, the buoyancy flux of the modeled plume is progressively increased to investigate the effects on the temperature and velocity structure of the upper mantle in the vicinity of the transform. Unlike earlier studies, which suggest that a transform always acts to decrease the along-axis extent of plume signature, these models imply that the effect of a transform on plume dispersion may be complex. Under certain ranges of plume flux modeled in this study, the region of the upper mantle undergoing along-axis flow directed away from the plume could be enhanced by the three-dimensional velocity and temperature structure associated with ridge-transform-ridge

Curiosity View of 'Vera Rubin Ridge' From Below, Sol 1734

NASA Image and Video Library

2017-09-13

"Vera Rubin Ridge," a favored destination for NASA's Curiosity Mars rover even before the rover landed in 2012, rises near the rover nearly five years later in this panorama from Curiosity's Mast Camera (Mastcam). The scene combines 23 images taken with the Mastcam's right-eye, telephoto-lens camera, on June 22, 2017, during the 1,734th Martian day, or sol, of Curiosity's work on Mars. The rover began ascending the ridge in September 2017. This and other Mastcam panoramas show details of the sedimentary rocks that make up the "Vera Rubin Ridge." This distinct topographic feature located on the lower slopes of Mount Sharp (Aeolis Mons) is characterized by the presence of hematite, an iron-oxide mineral, which has been detected from orbit. The Mastcam images show that the rocks making up the lower part of the ridge are characterized by distinct horizontal stratification with individual rock layers of the order of several inches (tens of centimeters) thick. Scientists on the mission are using such images to determine the ancient environment these rocks were deposited in. The repeated beds indicate progressive accumulation of sediments that now make up the lower part of Mount Sharp, although from this distance it is not possible to know if they were formed by aqueous or wind-blown processes. Close-up images collected as the rover climbs the ridge will help answer this question. The stratified rocks are cross cut by veins filled with a white mineral, likely calcium sulfate, that provide evidence of later episodes of fluid flow through the rocks. The panorama has been white-balanced so that the colors of the rock materials resemble how they would appear under daytime lighting conditions on Earth. It spans about 65 compass degrees, centered toward the south-southeast. Higher portions of Mount Sharp are visible at upper left. The Sol 1734 location just north of the ridge is shown in a Sol 1732 traverse map. An annotated figure is shown at https

Seismic structure of the Mid-Atlantic Ridge, 8-9°S

NASA Astrophysics Data System (ADS)

Minshull, T. A.; Bruguier, N. J.; Brozena, J. M.

2003-11-01

The Mid-Atlantic Ridge at 8-9°S is characterized by a transition from axial valley to axial high and recent episodes of ridge jumping and ridge propagation. We present constraints on the structure of 0-4 Ma crust in this region on the basis of the analysis of wide-angle seismic data from a grid of profiles across and parallel to the current and abandoned spreading centers. A 350-800 m thick oceanic layer 2A, interpreted as high-porosity extrusive basalts, is underlain by a ˜2.0-2.5 km layer 2B with velocities which increase with age and decrease in the vicinity of the pseudofaults. Layer 3 velocities are uniform across the area except for a possible localized anomaly at the ridge axis. The crustal thickness varies from 6-7 km near the pseudofaults formed by ridge propagation to 9-10 km at the segment center of the recently (˜0.3 Ma) abandoned spreading center. Seismically determined crustal thickness and density variations and age-related lithospheric cooling can plausibly account for all observed variations in gravity across the area, and there is no requirement for the thicker crust at the segment center to be underlain by hot mantle. The transition from axial valley to axial high occurs at a crustal thickness of ˜8 km.

SUSTAINABLE HOUSING AT PINE RIDGE RESERVATION

EPA Science Inventory

The Pine Ridge Reservation, located in rural South Dakota is plagued with deteriorating infrastructure, poverty, lack of local employment, and high utility bills. Many of the residents, the Oglala Lakota Nation, live in mobile homes or substandard housing and spend nearly 25% of...

Origin of the Louisville Ridge and its relationship to the Eltanin Fracture Zone System

NASA Astrophysics Data System (ADS)

Watts, A. B.; Weissel, J. K.; Duncan, R. A.; Larson, R. L.

1988-04-01

We have combined shipboard and Seasat altimeter derived data in an intergrated geological and geophysical study of the Louisville Ridge; a 3500-km-long seamount chain extending from the Tonga trench to the Eltanin Fracture Zone. A break in the smooth trend of the ridge at latitude 37.5°S has been recognized in both bathymetric and altimetric data. The 40Ar-39Ar dating of rocks dredged either side of the break suggest that it is analogous to the bend in the Hawaiian-Emperor seamount chain. Although the general trend of the ridge can be fit by small circles about Pacific absolute motion poles determined from other seamount chains, the new bathymetric and age data allow us to refine Pacific absolute motion poles. The continuity in smooth trend of the ridge and the Eltanin Fracture Zone suggests some relationship between them. However, a major offset developed on this transform between 60 and 80 Ma, prior to the oldest dated rocks from the ridge. Although magmatism was more or less continuous on the ridge during 28-60 Ma, it probably occurred on crust with little or no offset. Thus magmatism appears to have been little influenced by the developing fracture zone. By 28 Ma, the distance between the magmatic source and the fracture zone had decreased sufficiently for a portion of the ridge to have been emplaced on crust with an offset. After about 12 Ma, however, volcanic activity on the Louisville Ridge apparently waned, despite a possible influence on the magmatism of the fracture zone.

Groundwater quality in the Valley and Ridge and Piedmont and Blue Ridge carbonate-rock aquifers, eastern United States

USGS Publications Warehouse

Lindsey, Bruce; Belitz, Kenneth

2017-01-19

Groundwater provides nearly 50 percent of the Nation’s drinking water. To help protect this vital resource, the U.S. Geological Survey (USGS) National Water-Quality Assessment (NAWQA) Project assesses groundwater quality in aquifers that are important sources of drinking water. The Valley and Ridge and Piedmont and Blue Ridge carbonate-rock aquifers constitute two of the important areas being evaluated. One or more inorganic constituents with human-health benchmarks were detected at high concentrations in about 15 percent of the study area and at moderate concentrations in about 17 percent. Organic constituents were not detected at high concentrations in the study area. One or more organic constituents with human-health benchmarks were detected at moderate concentrations in about 2 percent of the study area.

Biology Division progress report, October 1, 1991--September 30, 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hartman, F.C.; Cook, J.S.

This Progress Report summarizes the research endeavors of the Biology Division of the Oak Ridge National Laboratory during the period October 1, 1991, through September 30, 1993. The report is structured to provide descriptions of current activities and accomplishments in each of the Division`s major organizational units. Lists of information to convey the entire scope of the Division`s activities are compiled at the end of the report.

Droplets move over viscoelastic substrates by surfing a ridge

PubMed Central

Karpitschka, S.; Das, S.; van Gorcum, M.; Perrin, H.; Andreotti, B.; Snoeijer, J. H.

2015-01-01

Liquid drops on soft solids generate strong deformations below the contact line, resulting from a balance of capillary and elastic forces. The movement of these drops may cause strong, potentially singular dissipation in the soft solid. Here we show that a drop on a soft substrate moves by surfing a ridge: the initially flat solid surface is deformed into a sharp ridge whose orientation angle depends on the contact line velocity. We measure this angle for water on a silicone gel and develop a theory based on the substrate rheology. We quantitatively recover the dynamic contact angle and provide a mechanism for stick–slip motion when a drop is forced strongly: the contact line depins and slides down the wetting ridge, forming a new one after a transient. We anticipate that our theory will have implications in problems such as self-organization of cell tissues or the design of capillarity-based microrheometers. PMID:26238436

Upper mantle structure at Walvis Ridge from Pn tomography

NASA Astrophysics Data System (ADS)

Ryberg, Trond; Braeuer, Benjamin; Weber, Michael

2017-10-01

Passive continental margins offer the unique opportunity to study the processes involved in continental extension and break-up. Within the LISPWAL (LIthospheric Structure of the Namibian continental Passive margin at the intersection with the Walvis Ridge from amphibious seismic investigations) project, combined on- and offshore seismic experiments were designed to characterize the Southern African passive margin at the Walvis Ridge in northern Namibia. In addition to extensive analysis of the crustal structures, we carried out seismic investigations targeting the velocity structure of the upper mantle in the landfall region of the Walvis Ridge with the Namibian coast. Upper mantle Pn travel time tomography from controlled source, amphibious seismic data was used to investigate the sub-Moho upper mantle seismic velocity. We succeeded in imaging upper mantle structures potentially associated with continental break-up and/or the Tristan da Cunha hotspot track. We found mostly coast-parallel sub-Moho velocity anomalies, interpreted as structures which were created during Gondwana break-up.

Bathymetry and oceanic flow structure at two deep passages crossing the Lomonosov Ridge

NASA Astrophysics Data System (ADS)

Björk, Göran; Jakobsson, Martin; Assmann, Karen; Andersson, Leif G.; Nilsson, Johan; Stranne, Christian; Mayer, Larry

2018-01-01

The Lomonosov Ridge represents a major topographical feature in the Arctic Ocean which has a large effect on the water circulation and the distribution of water properties. This study presents detailed bathymetric survey data along with hydrographic data at two deep passages across the ridge: a southern passage (80-81° N), where the ridge crest meets the Siberian continental slope, and a northern passage around 84.5° N. The southern channel is characterized by smooth and flat bathymetry around 1600-1700 m with a sill depth slightly shallower than 1700 m. A hydrographic section across the channel reveals an eastward flow with Amundsen Basin properties in the southern part and a westward flow of Makarov Basin properties in the northern part. The northern passage includes an approximately 72 km long and 33 km wide trough which forms an intra-basin in the Lomonosov Ridge morphology (the Oden Trough). The eastern side of the Oden Trough is enclosed by a narrow and steep ridge rising 500-600 m above a generally 1600 m deep trough bottom. The deepest passage (the sill) is 1470 m deep and located on this ridge. Hydrographic data show irregular temperature and salinity profiles indicating that water exchange occurs as midwater intrusions bringing water properties from each side of the ridge in well-defined but irregular layers. There is also morphological evidence that some rather energetic flows may occur in the vicinity of the sill. A well expressed deepening near the sill may be the result of seabed erosion by bottom currents.

Effects of Fertile Mantle Compositional Variation and Spreading Rate Variation on the Working of Global Ocean Ridges

NASA Astrophysics Data System (ADS)

Niu, Y.; O'Hara, M. J.

2014-12-01

Mantle temperature variation, plate spreading rate variation and mantle compositional variation have been considered to be the three fundamental variables that govern the working of global ocean ridges [1]. An analysis demonstrates that mantle compositional variation exerts the primary control on ocean ridge processes; it determines (1) variation in both composition and mode of mantle mineralogy, (2) variation of mantle density, (3) variation of ridge axial depth, (4) source-inherited MORB compositional variation, (4) density-controlled variation in the amplitude of mantle upwelling, (5) apparent variation in the extent of melting, and (6) the correlated variation of MORB chemistry with ridge axial depth [2]. The above interpretations are reinforced by the updated MORB database [3]. The new database also confirms spreading rate control on the extent of melting as shown previously [4]. Mantle temperature variation could play a part, but its overstated role [3,5] results from a basic error (1) in treating ridge axial depth variation as evidence of mantle temperature variation by ignoring the intrinsic control of mantle composition, (2) in treating "mantle plume" influenced ridges (e.g., Iceland) as normal ridges of plate spreading origin, and (3) in treating low Vs at greater depths (> 300 km vs. < 200 km beneath ridges) beneath these "mantle plume" influenced ridges as evidence for hot ridge mantle. In order to understand the working of global ocean ridges, we must avoid plume-influenced ridges (e.g., in the vicinity of Iceland) and remove/average out data from such ridges. As a result, the correlations (e.g., between ridge axial depth, mantle low Vs anomaly, and some geochemical parameters) required for the interpretation of mantle temperature control all disappear. There is thus no evidence for large mantle temperature variation away from ridges influenced by "mantle plumes". References: [1] Niu et al., 2001, Earth Planet Sci. Lett., 186, 383-399; [2] Niu & O

The comparison between several robust ridge regression estimators in the presence of multicollinearity and multiple outliers

NASA Astrophysics Data System (ADS)

Zahari, Siti Meriam; Ramli, Norazan Mohamed; Moktar, Balkiah; Zainol, Mohammad Said

2014-09-01

In the presence of multicollinearity and multiple outliers, statistical inference of linear regression model using ordinary least squares (OLS) estimators would be severely affected and produces misleading results. To overcome this, many approaches have been investigated. These include robust methods which were reported to be less sensitive to the presence of outliers. In addition, ridge regression technique was employed to tackle multicollinearity problem. In order to mitigate both problems, a combination of ridge regression and robust methods was discussed in this study. The superiority of this approach was examined when simultaneous presence of multicollinearity and multiple outliers occurred in multiple linear regression. This study aimed to look at the performance of several well-known robust estimators; M, MM, RIDGE and robust ridge regression estimators, namely Weighted Ridge M-estimator (WRM), Weighted Ridge MM (WRMM), Ridge MM (RMM), in such a situation. Results of the study showed that in the presence of simultaneous multicollinearity and multiple outliers (in both x and y-direction), the RMM and RIDGE are more or less similar in terms of superiority over the other estimators, regardless of the number of observation, level of collinearity and percentage of outliers used. However, when outliers occurred in only single direction (y-direction), the WRMM estimator is the most superior among the robust ridge regression estimators, by producing the least variance. In conclusion, the robust ridge regression is the best alternative as compared to robust and conventional least squares estimators when dealing with simultaneous presence of multicollinearity and outliers.

Geophysical survey of the Eggvin Bank and Logi Ridge - Greenland Sea

NASA Astrophysics Data System (ADS)

Breivik, A. J.; Mjelde, R.; Rai, A. K.; Frassetto, A.

2012-12-01

The northern Greenland Sea has a number of features associated with excess volcanism. These include the Jan Mayen island, the Jan Mayen Plateau north of, and the Eggvin Bank west of Jan Mayen, and the Vesteris Seamount far to the north. In the summer of 2011, we colleced an Ocean Bottom Seismometer (OBS) profile across the Eggvin Bank, returning four good data sets. We also collected single-channel reflection seismic (SCS) data along the OBS line. The profile crosses the transform part of the West Jan Mayen Fracture Zone (WJMFZ), which connects seafloor spreading between the Kolbeinsey and Mohn ridges. Between the WJMFZ and the Vesteris Seamount there is a narrow ridge 170-180 km long, ending in a few seamounts in the east. It disturbs the magnetic seafloor anomalies, and has no conjugate on the Norwegian margin. It thus appears to be younger than the Eocene seafloor it lies on. Trend and position points to Traill Ø in East Greenland, which had magmatism at ~36 Ma. We name it the Logi Ridge after Norse mythology, where Logi is the master of fire, brother of Aegir, master of the sea. We have collected five SCS profiles across this ridge in order to study the surrounding sedimentation pattern. We also collected gravity and magnetic data along all profiles. Initial results show two flat-topped seamounts on the Eggvin Bank, and a flat-topped Logi Ridge, indicating that these have been at sealevel. The sedimentary strata show recent vertical movement north of the WJMFZ near the Jan Mayen Plateau, and compression around the Logi Ridge. Sailing line of R/V Håkon Mosby of Bergen. Survey lines are in bold, and OBS positions are marked by circles.

Displacement-length ratios and contractional strains of lunar wrinkle ridges in Mare Serenitatis and Mare Tranquillitatis

NASA Astrophysics Data System (ADS)

Li, Bo; Ling, Zongcheng; Zhang, Jiang; Chen, Jian; Ni, Yuheng; Liu, Chunli

2018-04-01

Wrinkle ridges are complex thrust faults commonly found in lunar mare basalts and caused by compressional stresses from both local basin and global Moon. In this paper, we select 59 single wrinkle ridges in Mare Serenitatis and 39 single wrinkle ridges in Mare Tranquillitatis according to WAC mosaic image. For each wrinkle ridge, several topographic profiles near its midpoint are generated to measure its height and maximum displacement (Dmax) through LOLA DEM data. Then we make 2D plots of displacement-length (L) for ridge population in the two maria. The Dmax-L ratios (γ) are derived by a linear fit method according to the D-L data. The γ value (2.13 × 10-2) of ridges in Mare Tranquillitatis is higher than the γ value (1.73 × 10-2) of ridges in Mare Serenitatis. In the last, the contractional strains (ε) in Mare Serenitatis and Mare Tranquillitatis are estimated to be ∼0.36% and 0.14% (assuming the fault plane dip θ is 25°). The values of the free-air gravity anomalies in Mare Serenitatis range from 78 to 358 mGal higher than those of the gravity anomalies in Mare Tranquillitatis which range from -70 to 120 mGal. The average thickness of basalts in Mare Tranquillitatis is 400 m, while that of basalts in Mare Serenitatis is 798 m. Moreover, the average age for ridge group in Mare Serenitatis is bigger than the wrinkle ridge's age in Mare Tranquillitatis. The formation of ridge group in Mare Serenitatis takes longer time than that in Mare Serenitatis. Therefore, we think the higher value of gravity anomalies, thicker basaltic units and longer formation time for wrinkle ridge in Mare Serenitatis maybe result in the higher value of contractional strain, although the formation of Tranquillitatis basin is earlier than that of Serenitatis basin.

The pressure ridge distribution in the Arctic Ocean from submarine sonar data

NASA Astrophysics Data System (ADS)

Rodrigues, Joao; Wadhams, Peter

2010-05-01

The profiling of the underside of the sea ice with upward-looking sonars fitted to submarines is the best method of studying the large scale distribution of morphological features such as pressure ridges and leads. We present the statistical analysis of the distributions of pressure ridge spacings and heights, and lead spacings and widths observed during two Arctic cruises by the Royal Navy submarine HMS Tireless in the winters of 2004 and 2007 in which more than 10000km of sea ice draft data were collected. We briefly describe the main characteristics of the full ice draft distribution in the several regions of the Arctic Ocean visited by the submarine and discuss the most significant differences between 2004 and 2007. In the area of heavily ridged ice north of Greenland and Ellesmere Island we found an increase in ridge density (number of ridges per unit track length) accompanied by a decrease in modal ice draft, leaving the mean ice thickness essentially unchanged, between 2004 and 2007. This area is likely to be the only one in the Arctic Ocean where the sea ice thickness may not be in decline. We investigate the causes of this invariance in the context of an Arctic Ocean in transition from a multi-year to a first-year ice cover and discuss its relation with the strengthening of the transpolar drift and consequent accumulation of ice north of Greenland and increase in ice export through Fram Strait. Our analysis shows that the number of deep ridges per km is well described by a Poisson distribution while the corresponding distribution for shallow ridges is more complicated. The tail of the distribution of the pressure ridge heights is approximately a negative exponential, in agreement with similar observations made in previous cruises. We pay special attention to the uncertainties and biases in the measurement of the ice draft. Specifically, we discuss the effects of the finite beamwidth of the single-beam sonars traditionally used in British submarines on the

Paradise Lost: Uncertainties in melting and melt extraction processes beneath oceanic spreading ridges

NASA Astrophysics Data System (ADS)

Kelemen, P. B.

2014-12-01

In many ways, decompression melting and focused melt transport beneath oceanic spreading ridges is the best understood igneous process on Earth. However, there are remaining - increasing - uncertainties in interpreting residual mantle peridotites. Indicators of degree of melting in residual peridotite are questionable. Yb concentration and spinel Cr# are affected by (a) small scale variations in reactive melt transport, (b) variable extents of melt extraction, and (c) "impregnation", i.e. partial crystallization of cooling melt in pore space. Roughly 75% of abyssal peridotites have undergone major element refertilization. Many may have undergone several melting events. The following three statements are inconsistent: (1) Peridotite melt productivity beyond cpx exhaustion is > 0.1%/GPa. (2) Crustal thickness is independent of spreading rate at rates > 2 cm/yr full rate (excluding ultra-slow spreading ridges). (3) Thermal models predict, and observations confirm, thick thermal boundary layers beneath slow spreading ridges. If (a) melt productivity is << 0.1%/GPa beyond cpx-out, and (b) cpx-out occurs > 15 km below the seafloor beneath most ridges, then the independence of crustal thickness with spreading rate can be understood. Most sampled peridotites from ridges melted beyond cpx-out. Cpx in these rocks formed via impregnation and/or exsolution during cooling. Most peridotites beneath ridges may undergo cpx exhaustion during decompression melting. This would entail an upward modification of potential temperature estimates. Alternatively, perhaps oceanic crustal thickness does vary with spreading rate but this is masked by complicated tectonics and serpentinization at slow-spreading ridges. Dissolution channels (dunites) are predicted to coalesce downstream, but numerical models of these have not shown why > 95% of oceanic crust forms in a zone < 5 km wide. There may be permeability barriers guiding deeper melt toward the ridge, but field studies have not identified

Polygonal ridge networks on Mars: Diversity of morphologies and the special case of the Eastern Medusae Fossae Formation

NASA Astrophysics Data System (ADS)

Kerber, Laura; Dickson, James L.; Head, James W.; Grosfils, Eric B.

2017-01-01

Polygonal ridge networks, also known as boxwork or reticulate ridges, are found in numerous locations and geological contexts across Mars. Distinguishing the morphologies and geological context of the ridge networks sheds light on their potential as astrobiological and mineral resource sites of interest. The most widespread type of ridge morphology is characteristic of the Nili Fossae and Nilosyrtis region and consists of thin, criss-crossing ridges with a variety of heights, widths, and intersection angles. They are found in ancient Noachian terrains at a variety of altitudes (between -2500 and 2200 m) and geographic locations and are likely to be chemically altered fracture planes or mineral veins. They occur in the same general areas as valley networks and ancient lake basins, but they are not more numerous where these water-related features are concentrated, and can appear in places where th morphologies are absent. Similarly, some of the ridge networks are located near hydrated mineral detections, but there is not a one-to-one correlation. Smaller, light-toned ridges of variable widths have been found in Gale Crater and other rover sites and are interpreted to be smaller versions of the Nili-like ridges, mostly formed by the mineralization of fractures. This type of ridge is likely to be found in many other places on Mars as more high-resolution data become available. Sinus Meridiani contains many flat-topped ridges arranged into quasi-circular patterns. The ridges are eroding from a clay-rich unit, and could be formed by a similar process as the Nili-type ridges, but at a much larger scale and controlled by fractures made through a different process. Hellas Basin is host to a fourth type of ridge morphology consisting of large, thick, light-toned ridges forming regular polygons at several superimposed scales. While still enigmatic, these are most likely to be the result of sediment-filled fractures. The Eastern Medusae Fossae Formation contains large swaths

Ridges near Nirgal Valles

NASA Image and Video Library

2018-03-05

In this observation from NASA's Mars Reconnaissance Orbiter (MRO), we see a set of straight ridges in ancient bedrock near Nirgal Valles. The patterns indicate fractures from tectonic stresses, but how have they been hardened to now stand in positive relief after billions of years of erosion? It is possible that groundwater flowed through the fractures, depositing various durable minerals, some of which we see in diverse colors. https://photojournal.jpl.nasa.gov/catalog/PIA22333

Viscous remanent magnetization model for the Broken Ridge satellite magnetic anomaly

NASA Technical Reports Server (NTRS)

Johnson, B. D.

1985-01-01

An equivalent source model solution of the satellite magnetic field over Australia obtained by Mayhew et al. (1980) showed that the satellite anomalies could be related to geological features in Australia. When the processing and selection of the Magsat data over the Australian region had progressed to the point where interpretation procedures could be initiated, it was decided to start by attempting to model the Broken Ridge satellite anomaly, which represents one of the very few relatively isolated anomalies in the Magsat maps, with an unambiguous source region. Attention is given to details concerning the Broken Ridge satellite magnetic anomaly, the modeling method used, the Broken Ridge models, modeling results, and characteristics of magnetization.

Fluid and chemical fluxes along a buried-basement ridge in the eastern Juan de Fuca Ridge flank

NASA Astrophysics Data System (ADS)

Hulme, S.; Wheat, C. G.

2010-12-01

Hydrothermal fluid circulation within oceanic crust at low temperatures affects global biogeochemical cycles, with the volume of fluid circulation rivaling that of the world’s water flux to the oceans from rivers. Our work focuses on the best studied low temperature hydrothermal system on the eastern flank of the Juan de Fuca Ridge where a buried basement ridge 100 km from the active spreading axis has been sampled with a variety of mediums. We use data from deep sea drilling, gravity coring, and submersible operations from five sites along-strike of the buried ridge to better constrain the chemical and fluid fluxes along this transect. A transport (advection-diffusion) model is applied to the data, constraining the volumetric fluid flux per unit length within the oceanic crust from 0.05 and 0.2 m3 y-1 cm-1 and identifying conservative elements within this system. Using an average fluid flux, reactive fluxes are determined for non-conservative elements within basaltic crust for twenty-four chemical species. Conservative species include K, Cl, SO4, Ba, Sr, Cs, Mo, and Y. Only Ca and the rare earth elements Ce and Gd are produced by basaltic basement. The remaining chemical species Mg, Na, ammonium, Li, Rb, Mn, Fe, Co, Zn, Cd, U, La and Yb are all consumed within upper basaltic basement. Fluxes of potentially-bioavailable redox species ammonium, Fe, and Mn into the upper basaltic basement are 3 to 20 nmol y-1cm-2. Possible mechanisms of removal are suggested, placing constraints on microbial metabolic activity and biomineralization.

Toward self-consistent tectono-magmatic numerical model of rift-to-ridge transition

NASA Astrophysics Data System (ADS)

Gerya, Taras; Bercovici, David; Liao, Jie

2017-04-01

Natural data from modern and ancient lithospheric extension systems suggest three-dimensional (3D) character of deformation and complex relationship between magmatism and tectonics during the entire rift-to-ridge transition. Therefore, self-consistent high-resolution 3D magmatic-thermomechanical numerical approaches stand as a minimum complexity requirement for modeling and understanding of this transition. Here we present results from our new high-resolution 3D finite-difference marker-in-cell rift-to-ridge models, which account for magmatic accretion of the crust and use non-linear strain-weakened visco-plastic rheology of rocks that couples brittle/plastic failure and ductile damage caused by grain size reduction. Numerical experiments suggest that nucleation of rifting and ridge-transform patterns are decoupled in both space and time. At intermediate stages, two patterns can coexist and interact, which triggers development of detachment faults, failed rift arms, hyper-extended margins and oblique proto-transforms. En echelon rift patterns typically develop in the brittle upper-middle crust whereas proto-ridge and proto-transform structures nucleate in the lithospheric mantle. These deep proto-structures propagate upward, inter-connect and rotate toward a mature orthogonal ridge-transform patterns on the timescale of millions years during incipient thermal-magmatic accretion of the new oceanic-like lithosphere. Ductile damage of the extending lithospheric mantle caused by grain size reduction assisted by Zenner pinning plays critical role in rift-to-ridge transition by stabilizing detachment faults and transform structures. Numerical results compare well with observations from incipient spreading regions and passive continental margins.

Maintaining space in localized ridge augmentation using guided bone regeneration with tenting screw technology.

PubMed

Chasioti, Evdokia; Chiang, Tat Fai; Drew, Howard J

2013-01-01

Prosthetic guided implant surgery requires adequate ridge dimensions for proper implant placement. Various surgical procedures can be used to augment deficient alveolar ridges. Studies have examined new bone formation on deficient ridges, utilizing numerous surgical techniques and biomaterials. The goal is to develop time efficient techniques, which have low morbidity. A crucial factor for successful bone grafting procedures is space maintenance. The article discusses space maintenance tenting screws, used in conjunction with bone allografts and resorbable barrier membranes, to ensure uneventful guided bone regeneration (GBR) enabling optimal implant positioning. The technique utilized has been described in the literature to treat severely resorbed alveolar ridges and additionally can be considered in restoring the vertical and horizontal component of deficient extraction sites. Three cases are presented to illustrate the utilization and effectiveness of tenting screw technology in the treatment of atrophic extraction sockets and for deficient ridges.

Is ridge preservation/augmentation at periodontally compromised extraction sockets safe? A retrospective study.

PubMed

Kim, Jung-Ju; Ben Amara, Heithem; Schwarz, Frank; Kim, Hae-Young; Lee, Jung-Won; Wikesjö, Ulf M E; Koo, Ki-Tae

2017-10-01

This study aimed to evaluate the safety of ridge preservation/augmentation procedures when performed at compromised extraction sockets. Patients subject to ridge preservation/augmentation at periodontally compromised sockets at Seoul National University Dental Hospital (SNUDH) were evaluated in a chart review. Tooth extractions due to acute infection were not included in our study as chronically formed lesions are the only lesions that can be detected from radiographic images. If inflammatory symptoms persisted following ridge preservation/augmentation and antimicrobial and anti-inflammatory therapy, the patient was categorized as a re-infection case and implanted biomaterial removed. Of 10,060 patients subject to tooth extractions at SNUDH, 2011 through 2015, 297 cases meeting inclusion criteria were reviewed. The severity and type of lesions were not specific because extracting data was only done by radiographic images and chart records. The review identified eight patients exhibiting inflammatory symptoms that required additional antimicrobial and anti-inflammatory therapy. Within this group, re-infection occurred in two patients requiring biomaterials removal. The final safety rate for the ridge preservation/augmentation was 99.3%. None of the demographic factors, systemic conditions or choice of biomaterial affected the safety of ridge preservation/augmentation. Alveolar ridge preservation/augmentation at periodontally compromised sockets appears safe following thorough removal of infectious source. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Morphology and tectonics of the Mid-Atlantic Ridge, 7°-12°S

NASA Astrophysics Data System (ADS)

Bruguier, N. J.; Minshull, T. A.; Brozena, J. M.

2003-02-01

We present swath bathymetric, gravity, and magnetic data from the Mid-Atlantic Ridge between the Ascension and the Bode Verde fracture zones, where significant ridge-hot spot interaction has been inferred. The ridge axis in this region may be divided into four segments. The central two segments exhibit rifted axial highs, while the northernmost and southernmost segments have deep rift valleys typical of slow-spreading mid-ocean ridges. Bathymetric and magnetic data indicate that both central segments have experienced ridge jumps since ˜1 Ma. Mantle Bouguer anomalies (MBAs) derived from shipboard free air gravity and swath bathymetric data show deep subcircular lows centered on the new ridge axes, suggesting that mantle flow has been established beneath the new spreading centers for at least ˜1 Myr. Inversion of gravity data indicates that crustal thicknesses vary by ˜4 km along axis, with the thickest crust occurring beneath a large axial volcanic edifice. Once the effects of lithospheric aging have been removed, a model in which gravity variations are attributed entirely to crustal thickness variations is more consistent with data from an axis-parallel seismic line than a model that includes additional along-axis variations in mantle temperature. Both geophysical and geochemical data from the region may be explained by the melting of small (<200 km) mantle chemical heterogeneities rather than elevated temperatures. Therefore, there may be no Ascension/Circe plume.

[Genetic polymorphism of Gentiana lutea L. (Gentianaceae) populations from Chornohora Ridge of Ukrainian Carpathians].

PubMed

Mosula, M Z; Konvaliuk, I I; Mel'nyk, V M; Drobyk, N M; Tsaryk, I V; Nesteruk, Iu I; Kunakh, V A

2014-01-01

The features of genetic structure and level of diversity were investigated for G. lutea populations from Chornohora Ridge of Ukrainian Carpathians using RAPD- and ISSR-PCR. We have shown a high level of genetic diversity for investigated populations. The differences between populations account for 59-72% of the total genetic variation, whereas intrapopulation polymorphism makes up 28-41%. The relationships among genetic variability level and ecological-geographical conditions as well as biological features of the species were assumed to be possible. The obtained results indicate the genetic isolation of G. lutea Chornohora populations from Ukrainian Carpathians. Pozhyzhevska agropopulation was characterized by a high level of polymorphism that means the possibility to use artificial plantings of the investigated species for its conservation.

Localized ridge defect augmentation using human pericardium membrane and demineralized bone matrix.

PubMed

Vidyadharan, Arun Kumar; Ravindran, Anjana

2014-01-01

Patient wanted to restore her lost teeth with implants in the lower left first molar and second premolar region. Cone beam computerized tomography (CBCT) revealed inadequate bone width and height around future implant sites. The extraction socket of second premolar area revealed inadequate socket healing with sparse bone fill after 4 months of extraction. To evaluate the clinical feasibility of using a collagen physical resorbable barrier made of human pericardium (HP) to augment localized alveolar ridge defects for the subsequent placement of dental implants. Ridge augmentation was done in the compromised area using Puros® demineralized bone matrix (DBM) Putty with chips and an HP allograft membrane. Horizontal (width) and vertical hard tissue measurements with CBCT were recorded on the day of ridge augmentation surgery, 4 month and 7 months follow-up. Intra oral periapical taken 1 year after implant installation showed minimal crestal bone loss. Bone volume achieved through guided bone regeneration was a gain of 4.8 mm horizontally (width) and 6.8 mm vertically in the deficient ridge within a period of 7 months following the procedure. The results suggested that HP Allograft membrane may be a suitable component for augmentation of localized alveolar ridge defects in conjunction with DBM with bone chips.

Dacite petrogenesis on mid-ocean ridges: Evidence for oceanic crustal melting and assimilation

USGS Publications Warehouse

Wanless, V.D.; Perfit, M.R.; Ridley, W.I.; Klein, E.

2010-01-01

Whereas the majority of eruptions at oceanic spreading centers produce lavas with relatively homogeneous mid-ocean ridge basalt (MORB) compositions, the formation of tholeiitic andesites and dacites at mid-ocean ridges (MORs) is a petrological enigma. Eruptions of MOR high-silica lavas are typically associated with ridge discontinuities and have produced regionally significant volumes of lava. Andesites and dacites have been observed and sampled at several locations along the global MOR system; these include propagating ridge tips at ridge-transform intersections on the Juan de Fuca Ridge and eastern Gal??pagos spreading center, and at the 9??N overlapping spreading center on the East Pacific Rise. Despite the formation of these lavas at various ridges, MOR dacites show remarkably similar major element trends and incompatible trace element enrichments, suggesting that similar processes are controlling their chemistry. Although most geochemical variability in MOR basalts is consistent with low-pressure fractional crystallization of various mantle-derived parental melts, our geochemical data for MOR dacitic glasses suggest that contamination from a seawater-altered component is important in their petrogenesis. MOR dacites are characterized by elevated U, Th, Zr, and Hf, low Nb and Ta concentrations relative to rare earth elements (REE), and Al2O3, K2O, and Cl concentrations that are higher than expected from low-pressure fractional crystallization alone. Petrological modeling of MOR dacites suggests that partial melting and assimilation are both integral to their petrogenesis. Extensive fractional crystallization of a MORB parent combined with partial melting and assimilation of amphibole-bearing altered crust produces a magma with a geochemical signature similar to a MOR dacite. This supports the hypothesis that crustal assimilation is an important process in the formation of highly evolved MOR lavas and may be significant in the generation of evolved MORB in

The theoretical root of Karl Jaspers’ General Psychopathology. Part 1: Reconsidering the influence of phenomenology and hermeneutics

PubMed Central

2013-01-01

The present paper investigates the methodology involved in Jaspers’ psychopathology and compares it with Husserl’s phenomenology and with Dilthey’s cultural science. Allgemeine Psychopathologie and other methodological works by Jaspers, the works of Husserl and Dilthey that Jaspers cited, and previous research papers on Jaspers are reviewed. Jaspers had conflicting views on understanding, which were comprised of both empathic understanding and rational, ideal-typical understanding. Such a standpoint on understanding is considerably different from Dilthey’s. Additionally, the present paper reconfirms that Jaspers’ ‘phenomenology’ as a form of descriptive psychology for the understanding of empirical psychic states is different from Husserl’s phenomenology. Thus, this paper casts doubt on the common opinion that Jaspers was under the profound influence of Husserl or Dilthey. PMID:24573260

Dive and Discover: New Arctic Educational Modules and Near Real-Time Coverage of Exploration on the Gakkel Ridge, Arctic Ocean

NASA Astrophysics Data System (ADS)

Humphris, S. E.; Conrad, D. S.; Joyce, K.; Whitcomb, L.; Carignan, C.

2006-12-01

The award-winning Dive and Discover web site will provide education and outreach activities during the International Polar Year for an expedition to investigate hydrothermal activity on the Gakkel Ridge using autonomous underwater vehicles. Created in 2000, this web site is targeted mainly at middle-school students (Grades 6-8) and the general public, but is structured to provide multiple layers and levels of information to cover a wide range of educational experience. The backbone of the site is a series of educational modules that address basic science concepts central to marine science and research being conducted in the deep ocean and on the seafloor. The site already contains considerable material on a range of topics pertinent to seafloor exploration, including mid-ocean ridges, hydrothermal vents, and vent biology, as well as Antarctica. For the cruise to the Gakkel Ridge, two new modules relevant to the upcoming Gakkel Ridge cruise are being developed: one on the geography, oceanography and ecosystems of the Arctic Ocean, and another on underwater robotics. During the 2007 cruise, Dive and Discover will provide daily updates on the progress of the cruise through still and video images from the ship and from the seafloor, graphical representations of a wide variety of oceanographic data, explanations about the technology being used, general information about life at sea on an ice breaker conducting marine research, and interviews with the scientists, engineers, and mariners that make oceanographic research possible. In addition, a "Mail Buoy" will allow the general public to communicate directly by email with scientists at sea. Once the cruise is completed, it will remain live on the site so that it can continue to be accessed and used by teachers during any part of the school year.

Stratigraphic framework and distribution of lignite on Crowleys Ridge, Arkansas

USGS Publications Warehouse

Meissner, Charles R.

1983-01-01

The purpose of this report is to establish a stratigraphic framework of lignite beds and associated strata of Crowleys Ridge, Arkansas. Drill hole data provided by the Arkansas Geological Commission is used in the synthesis and interpretation. Areas containing lignite of potential resource value are also delineated. To illustrate the regional stratigraphic framework of Crowleys Ridge, a cross section was constructed from logs of selected oil and gas test wells, along or adjacent to the north-south trending ridge over a distance of about 115 miles. This section reveals that lignite-bearing Tertiary formations dip gently southward along the ridge. The Paleocene-Eocene Wilcox Group forms the bedrock in the northern part of the ridge and successively younger bedrock of the Eocene Claiborne and Jackson Groups is identified in the central and southern part of the ridge. Crowleys Ridge is mantled with alluvium and loess of Quaternary age, and sand and gravel beds of the Lafayette Formation of Pliocene (?) age that unconformably overlie the Paleocene and Eocene rocks. The thickness of lignite-bearing sedimentary deposits ranges from 830 feet in the north to 2,480 feet in the south. The Wilcox, Claiborne, and Jackson Groups of Paleocene and Eocene age are believed to be fluvial-deltaic in origin. The detailed vertical and horizontal stratigraphic characteristics and distribution of lignite beds in the sediments were determined by constructing seven cross sections from lithologic and geophysical logs of the lignite investigations on Crowleys Ridge by the Arkansas Geological Commission and private companies. Correlation and interpretation of the lignite-bearing strata reveal ten lignite beds of resource potential. These lignite beds range from a few inches to 9.5 ft in thickness and are assigned to stratigraphic intervals that are designated as zone 1 through 7. Zone 1 is near the middle of the Wilcox Group and zone 7 is near the middle of the overlying Claiborne Group. Some

Interpretation of bathymetric and magnetic data from the easternmost segment of Australian-Antarctic Ridge, 156°-161°E

NASA Astrophysics Data System (ADS)

Choi, H.; Kim, S.; Park, S.

2013-12-01

From 2011 to 2013, Korea Polar Research Institute (KOPRI) conducted a series of geophysical and geochemical expeditions on the longest and easternmost segment of Australian-Antarctic Ridge, located at 61°-63°S, and 156°-161°E. This ridge segment plays an important role in constraining the tectonics of the Antarctic plate. Using IBRV ARAON, the detailed bathymetric data and eleven total magnetic profiles were collected. The studied ridge has spread NNW-SSE direction and tends to be shallower to the west and deeper to the east. The western side of the ridge (156°-157.50°E) shows a broad axial high and a plenty of seamounts as an indicative of massive volcanism. Near the center of the ridge (158°-159°E), a seamount chain is formed stretching toward the south from the ridge. Also, the symmetric seafloor fabric is clearly observed at the eastern portion (158.50°-160°E) of the seamount chain. From the topographic change along the ridge axis, the western part of the ridge appears to have a sufficient magma supply. On the contrary, the eastern side of the ridge (160°-161°E) is characterized by axial valley and relatively deeper depth. Nevertheless, the observed total magnetic field anomalies exhibit symmetric patterns across the ridge axis. Although there have not been enough magnetic survey lines, the spreading rates of the ridge are estimated as the half-spreading rate of 37.7 mm/y and 35.3 mm/y for the western portion of the ridge and 42.3 mm/y for the eastern portion. The studied ridge can be categorized as an intermediate spreading ridge, confirming previous studies based on the spreading rate of global ridge system. Here we will present the preliminary results on bathymetric changes along the ridge axis and its relationship with melt supply distribution, and detailed magnetic properties of the ridge constrained by the observed total field anomalies.

Fluvial Channel Networks as Analogs for the Ridge-forming Unit, Sinus Meridiani, Mars

NASA Astrophysics Data System (ADS)

Wilkinson, M. J.; Dubois, J. B.

2010-12-01

Fluvial models have been generally discounted as analogs for the younger layered rock units of Sinus Meridiani. A fluvial model based on the large fluvial fan provides a possibly close analog for various features of the sinuous ridges of the etched, ridge-forming unit (RFU) in particular. The close spacing of the RFU ridges, their apparently chaotic orientations, and their organization in dense networks all appear unlike classical stream channel patterns. However, drainage patterns on large fluvial fans—low-angle, fluvial aggradational features, 100s of km long, documented worldwide by us—provide parallels. Some large fan characteristics resemble those of classical floodplains, but many differences have been demonstrated. One major distinction relevant to the RFU is that channel landscapes of large fans can dominate large areas (1.2 million km2 in one S. American study area). We compare channel morphologies on large fans in the southern Sahara Desert with ridge patterns in Sinus Meridiani (fig 1). Stream channels are the dominant landform on large terrestrial fans: they may equate to the ubiquitous, sinuous, elongated ridges of the RFU that cover areas region wide. Networks of convergent/divergent and crossing channels may equate to similar features in the ridge networks. Downslope divergence is absent in channels of terrestrial upland erosional landscapes (fig. 1, left), whereas it is common to both large fans (fig. 1, center) and RFU ridge patterns (fig 1, right—downslope defined as the regional NW slope of Sinus Meridiani). RFU ridge orientation, judged from those areas apparently devoid of impact crater control, is broadly parallel with the regional slope (arrow, fig. 1, right), as is mean orientation of major channels on large fans (arrow, fig. 1, center). High densities per unit area characterize fan channels and martian ridges—reaching an order of magnitude higher than those in uplands just upstream of the terrestrial study areas—fig. 1. In concert

Response of the everglades ridge and slough landscape to climate variability and 20th-century water management

USGS Publications Warehouse

Bernhardt, C.E.; Willard, D.A.

2009-01-01

The ridge and slough landscape of the Florida Everglades consists of a mosaic of linear sawgrass ridges separated by deeper-water sloughs with tree islands interspersed throughout the landscape. We used pollen assemblages from transects of sediment cores spanning sawgrass ridges, sloughs, and ridge-slough transition zones to determine the timing of ridge and slough formation and to evaluate the response of components of the ridge and slough landscape to climate variability and 20th-century water management. These pollen data indicate that sawgrass ridges and sloughs have been vegetationally distinct from one another since initiation of the Everglades wetland in mid-Holocene time. Although the position and community composition of sloughs have remained relatively stable throughout their history, modern sawgrass ridges formed on sites that originally were occupied by marshes. Ridge formation and maturation were initiated during intervals of drier climate (the Medieval Warm Period and the Little Ice Age) when the mean position of the Intertropical Convergence Zone shifted southward. During these drier intervals, marsh taxa were more common in sloughs, but they quickly receded when precipitation increased. Comparison with regional climate records suggests that slough vegetation is strongly influenced by North Atlantic Oscillation variability, even under 20th-century water management practices. ?? 2009 by the Ecological Society of America.

Department of Energy Air Emissions Annual Report Oak Ridge Reservation, Oak Ridge, Tennessee 40 Code of Federal Regulations (CFR) 61, Subpart H Calendar Year 2016

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martin, Richard

As defined in the preamble of the final rule, the entire DOE facility on the Oak Ridge Reservation (ORR) must meet the 10 mrem/yr ED standard.1 In other words, the combined ED from all radiological air emission sources from Y-12 National Security Complex (Y-12 Complex), Oak Ridge National Laboratory (ORNL), East Tennessee Technology Park (ETTP), Oak Ridge Institute for Science and Education (ORISE) and any other DOE operation on the reservation must meet the 10 mrem/yr standard. Compliance with the standard is demonstrated through emission sampling, monitoring, calculations and radiation dose modeling in accordance with approved EPA methodologies and procedures.more » DOE estimates the ED to many individuals or receptor points in the vicinity of ORR, but it is the dose to the maximally exposed individual (MEI) that determines compliance with the standard.« less

Oxygen Fugacity of Abyssal Peridotites Along the Gakkel Ridge

NASA Astrophysics Data System (ADS)

Said, M.; Birner, S.; Cottrell, E.

2015-12-01

The oxygen budget of the Earth's mantle is important in understanding how our planet evolves chemically over time. The Gakkel Ridge is the world's slowest spreading ridge [1], and exposes peridotites along its axis that record the activity of oxygen in the upper mantle. Our samples comprise relatively fertile lherzolites and harzburgites (Cr#=0.13-0.17, 3.1-8.3% modal cpx [2]) as well as refractory harzburgites (Cr#=0.43-0.55, 0.2-1.0% modal cpx [2]). Using spinel peridotite oxygen barometry [3], we calculated the oxygen fugacity (fO2) of a suite of 10 peridotites from the Gakkel Ridge in order to investigate how melt processes affect the oxygen budget of the Earth's interior. We show that the low-Cr# lherzolites and harzburgites range from -0.1 to +0.6 log units relative to the QFM buffer, consistent with the global abyssal peridotite array, whereas high-Cr# refractory harzburgites have low fO2 values, ranging from -0.7 to -2.7 log units below QFM, with the most refractory samples falling significantly lower than the global array. Because D'Errico et al. (submitted) interprets the refractory samples as recording ancient melt extraction, the low fO2 recorded by these samples may originate in the geologic past, perhaps even in a different tectonic setting. While LREE enrichment in the refractory harzburgites [2] provides evidence for refertilization by an infiltrating melt that could have recently imprinted reducing conditions, we see no corresponding increase in TiO2 content in the spinels, which weakens this hypothesis. Further research on additional refractory harzburgites is needed to constrain whether the reduced nature of these samples is telling us something about the effect of extreme melt extraction on fO2 at ridges, or whether these samples record a unique history that obscures processes operating at ridges today. [1] Coakley and Cochran, EPSL (1998), [2] D'Errico et al., submitted, [3] Bryndzia and Wood, American Journal of Science (1990)

Fingerprint Ridge Density as a Potential Forensic Anthropological Tool for Sex Identification.

PubMed

Dhall, Jasmine Kaur; Kapoor, Anup Kumar

2016-03-01

In cases of partial or poor print recovery and lack of database/suspect print, fingerprint evidence is generally neglected. In light of such constraints, this study was designed to examine whether ridge density can aid in narrowing down the investigation for sex identification. The study was conducted on the right-hand index digit of 245 males and 246 females belonging to the Punjabis of Delhi region. Five ridge density count areas, namely upper radial, radial, ulnar, upper ulnar, and proximal, were selected and designated. Probability of sex origin was calculated, and stepwise discriminant function analysis was performed to determine the discriminating ability of the selected areas. Females were observed with a significantly higher ridge density than males in all the five areas. Discriminant function analysis and logistic regression exhibited 96.8% and 97.4% accuracy, respectively, in sex identification. Hence, fingerprint ridge density is a potential tool for sex identification, even from partial prints. © 2015 American Academy of Forensic Sciences.

Structure of the southern Juan de Fuca Ridge from seismic reflection records

USGS Publications Warehouse

Morton, Janet L.; Sleep, Norman H.; Normark, William R.; Tompkins, Donald H.

1987-01-01

Twenty-four-channel seismic reflection records were obtained from the axial region of the southern Juan de Fuca Ridge. Two profiles are normal to the strike of the spreading center and intersect the ridge at latitude 44°40′N and 45°05′N; a third profile extends south along the ridge axis from latitude 45°20′N and crosses the Blanco Fracture Zone. Processing of the axial portions of the cross-strike lines resolved a weak reflection centered beneath the axis. The reflector is at a depth similar to seismically detected magma chambers on the East Pacific Rise and a Lau Basin spreading center; we suggest that the reflector represents the top of an axial magma chamber. In the migrated sections the top of the probable magma chamber is relatively flat and 1–2 km wide, and the subbottom depth of the chamber is greater where the depth to the ridge axis is greater.

Oak Ridge Reservation Waste Management Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Turner, J.W.

1995-02-01

This report presents the waste management plan for the Oak Ridge Reservation facilities. The primary purpose is to convey what facilities are being used to manage wastes, what forces are acting to change current waste management systems, and what plans are in store for the coming fiscal year.

An adaptive Hinfinity controller design for bank-to-turn missiles using ridge Gaussian neural networks.

PubMed

Lin, Chuan-Kai; Wang, Sheng-De

2004-11-01

A new autopilot design for bank-to-turn (BTT) missiles is presented. In the design of autopilot, a ridge Gaussian neural network with local learning capability and fewer tuning parameters than Gaussian neural networks is proposed to model the controlled nonlinear systems. We prove that the proposed ridge Gaussian neural network, which can be a universal approximator, equals the expansions of rotated and scaled Gaussian functions. Although ridge Gaussian neural networks can approximate the nonlinear and complex systems accurately, the small approximation errors may affect the tracking performance significantly. Therefore, by employing the Hinfinity control theory, it is easy to attenuate the effects of the approximation errors of the ridge Gaussian neural networks to a prescribed level. Computer simulation results confirm the effectiveness of the proposed ridge Gaussian neural networks-based autopilot with Hinfinity stabilization.

A ridge tracking algorithm and error estimate for efficient computation of Lagrangian coherent structures.

PubMed

Lipinski, Doug; Mohseni, Kamran

2010-03-01

A ridge tracking algorithm for the computation and extraction of Lagrangian coherent structures (LCS) is developed. This algorithm takes advantage of the spatial coherence of LCS by tracking the ridges which form LCS to avoid unnecessary computations away from the ridges. We also make use of the temporal coherence of LCS by approximating the time dependent motion of the LCS with passive tracer particles. To justify this approximation, we provide an estimate of the difference between the motion of the LCS and that of tracer particles which begin on the LCS. In addition to the speedup in computational time, the ridge tracking algorithm uses less memory and results in smaller output files than the standard LCS algorithm. Finally, we apply our ridge tracking algorithm to two test cases, an analytically defined double gyre as well as the more complicated example of the numerical simulation of a swimming jellyfish. In our test cases, we find up to a 35 times speedup when compared with the standard LCS algorithm.

Sexual dimorphism in finger ridge breadth measurements: a tool for sex estimation from fingerprints.

PubMed

Mundorff, Amy Z; Bartelink, Eric J; Murad, Turhon A

2014-07-01

Previous research has demonstrated significant sexual dimorphism in friction ridge skin characteristics. This study uses a novel method for measuring sexual dimorphism in finger ridge breadths to evaluate its utility as a sex estimation method from an unknown fingerprint. Beginning and ending in a valley, the width of ten parallel ridges with no obstructions or minutia was measured in a sample of 250 males and females (N = 500). The results demonstrate statistically significant differences in ridge breadth between males and females (p < 0.001), with classification accuracy for each digit varying from 83.2% to 89.3%. Classification accuracy for the pooled finger samples was 83.9% for the right hand and 86.2% for the left hand, which is applicable for cases where the digit number cannot be determined. Weight, stature, and to a lesser degree body mass index also significantly correlate with ridge breadth and account for the degree of overlap between males and females. © 2014 American Academy of Forensic Sciences.

Exploring tectonomagmatic controls on mid-ocean ridge faulting and morphology with 3-D numerical models

NASA Astrophysics Data System (ADS)

Howell, S. M.; Ito, G.; Behn, M. D.; Olive, J. A. L.; Kaus, B.; Popov, A.; Mittelstaedt, E. L.; Morrow, T. A.

2016-12-01

Previous two-dimensional (2-D) modeling studies of abyssal-hill scale fault generation and evolution at mid-ocean ridges have predicted that M, the ratio of magmatic to total extension, strongly influences the total slip, spacing, and rotation of large faults, as well as the morphology of the ridge axis. Scaling relations derived from these 2-D models broadly explain the globally observed decrease in abyssal hill spacing with increasing ridge spreading rate, as well as the formation of large-offset faults close to the ends of slow-spreading ridge segments. However, these scaling relations do not explain some higher resolution observations of segment-scale variability in fault spacing along the Chile Ridge and the Mid-Atlantic Ridge, where fault spacing shows no obvious correlation with M. This discrepancy between observations and 2-D model predictions illuminates the need for three-dimensional (3-D) numerical models that incorporate the effects of along-axis variations in lithospheric structure and magmatic accretion. To this end, we use the geodynamic modeling software LaMEM to simulate 3-D tectono-magmatic interactions in a visco-elasto-plastic lithosphere under extension. We model a single ridge segment subjected to an along-axis gradient in the rate of magma injection, which is simulated by imposing a mass source in a plane of model finite volumes beneath the ridge axis. Outputs of interest include characteristic fault offset, spacing, and along-axis gradients in seafloor morphology. We also examine the effects of along-axis variations in lithospheric thickness and off-axis thickening rate. The main objectives of this study are to quantify the relative importance of the amount of magmatic extension and the local lithospheric structure at a given along-axis location, versus the importance of along-axis communication of lithospheric stresses on the 3-D fault evolution and morphology of intermediate-spreading-rate ridges.

Effect of alveolar ridge preservation after tooth extraction: a systematic review and meta-analysis.

PubMed

Avila-Ortiz, G; Elangovan, S; Kramer, K W O; Blanchette, D; Dawson, D V

2014-10-01

Alveolar ridge preservation strategies are indicated to minimize the loss of ridge volume that typically follows tooth extraction. The aim of this systematic review was to determine the effect that socket filling with a bone grafting material has on the prevention of postextraction alveolar ridge volume loss as compared with tooth extraction alone in nonmolar teeth. Five electronic databases were searched to identify randomized clinical trials that fulfilled the eligibility criteria. Literature screening and article selection were conducted by 3 independent reviewers, while data extraction was performed by 2 independent reviewers. Outcome measures were mean horizontal ridge changes (buccolingual) and vertical ridge changes (midbuccal, midlingual, mesial, and distal). The influence of several variables of interest (i.e., flap elevation, membrane usage, and type of bone substitute employed) on the outcomes of ridge preservation therapy was explored via subgroup analyses. We found that alveolar ridge preservation is effective in limiting physiologic ridge reduction as compared with tooth extraction alone. The clinical magnitude of the effect was 1.89 mm (95% confidence interval [CI]: 1.41, 2.36; p < .001) in terms of buccolingual width, 2.07 mm (95% CI: 1.03, 3.12; p < .001) for midbuccal height, 1.18 mm (95% CI: 0.17, 2.19; p = .022) for midlingual height, 0.48 mm (95% CI: 0.18, 0.79; p = .002) for mesial height, and 0.24 mm (95% CI: -0.05, 0.53; p = .102) for distal height changes. Subgroup analyses revealed that flap elevation, the usage of a membrane, and the application of a xenograft or an allograft are associated with superior outcomes, particularly on midbuccal and midlingual height preservation. © International & American Associations for Dental Research.

Coupled Modeling and Field Approach to Explore Patterns of Barrier Ridge and Swale Development

NASA Astrophysics Data System (ADS)

Ciarletta, D. J.; Lorenzo-Trueba, J.; Shawler, J. L.; Hein, C. J.

2017-12-01

Previous work has suggested the morphologies of barrier ridge and swale systems potentially reflect the environmental conditions under which they developed, especially in response to sediment budget. We use this inference to examine progradational dune systems on barriers along the USA Mid-Atlantic coast, constructing a simple morphodynamic model to capture the magnitude of changes in key processes affecting the pattern of ridge and swale development. Based on our initial investigation, we demonstrate a range of potential morphological patterns generated by the interaction of longshore transport, accommodation, overwash, aeolian sand flux, and vegetation controls. The patterns are based on three basic cross-sectional morphologies describing the spacing and width of ridges. Regularly spaced ridges of roughly equal width are defined as washboards; wide platform-like ridges or complex multi-ridge dunes are described as tables; and wide swaths of open sand or poorly developed dunes are identified as pans. The inclusion of overwash, in competition with the other processes, further allows the creation of infilled swales, or baffled structures, as well as inter-ridge and backbarrier fans/flats. Model outcomes are validated via comparison to observations from barriers in Virginia, Maryland, and New Jersey. In particular, historical (post-1850) mapping of the evolution of the Fishing Point spit (Assateague Island) reveals the ability of the model to approximate the growth of structures seen in the field. We then apply the model to the development of a prehistoric progradational system on Parramore Island, VA, using field stratigraphic/chronologic data to supply input parameters and begin predictively quantifying past changes in longshore transport and accommodation. Our investigations suggest that modeling patterns of ridge and swale development preserved on modern coasts could result in novel approaches to employ barriers as archives of past environmental/climate forcing.

Sand ridges off Sarasota, Florida: A complex facies boundary on a low-energy inner shelf environment

USGS Publications Warehouse

Twichell, D.; Brooks, Gillian L.; Gelfenbaum, G.; Paskevich, V.; Donahue, Brian

2003-01-01

The innermost shelf off Sarasota, Florida was mapped using sidescan-sonar imagery, seismic-reflection profiles, surface sediment samples, and short cores to define the transition between an onshore siliciclastic sand province and an offshore carbonate province and to identify the processes controlling the distribution of these distinctive facies. The transition between these facies is abrupt and closely tied to the morphology of the inner shelf. A series of low-relief nearly shore-normal ridges characterize the inner shelf. Stratigraphically, the ridges are separated from the underlying Pleistocene and Tertiary carbonate strata by the Holocene ravinement surface. While surficial sediment is fine to very-fine siliciclastic sand on the southeastern sides of the ridges and shell hash covers their northwestern sides, the cores of these Holocene deposits are a mixture of both of these facies. Along the southeastern edges of the ridges the facies boundary coincides with the discontinuity that separates the ridge deposits from the underlying strata. The transition from siliciclastic to carbonate sediment on the northwestern sides of the ridges is equally abrupt, but it falls along the crests of the ridges rather than at their edges. Here the facies transition lies within the Holocene deposit, and appears to be the result of sediment reworking by modern processes. This facies distribution primarily appears to result from south-flowing currents generated during winter storms that winnow the fine siliciclastic sediment from the troughs and steeper northwestern sides of the ridges. A coarse shell lag is left armoring the steeper northwestern sides of the ridges, and the fine sediment is deposited on the gentler southeastern sides of the ridges. This pronounced partitioning of the surficial sediment appears to be the result of the siliciclastic sand being winnowed and transported by these currents while the carbonate shell hash falls below the threshold of sediment movement

Making the diagnosis: metopic ridge versus metopic craniosynostosis.

PubMed

Birgfeld, Craig B; Saltzman, Babette S; Hing, Anne V; Heike, Carrie L; Khanna, Paritosh C; Gruss, Joseph S; Hopper, Richard A

2013-01-01

The metopic suture is the only calvarial suture which normally closes during infancy. Upon closure, a palpable and visible ridge often forms which can be confused with metopic craniosynostosis. Metopic ridging (MR) is treated nonsurgically while metopic craniosynostosis (MCS) is treated surgically. Differentiating between the two is paramount; however, consensus is lacking about where a clear diagnostic threshold lies. The goal of this study is to describe the physical examination and CT scan characteristics which may help to differentiate between physiological closure of the metopic suture with ridging (MR) and MCS. A retrospective chart review of all patients seen at Seattle Children's Hospital between 2004 and 2009 with the diagnosis of either MCS or MR (n = 282) was performed. Physical examination characteristics described by diagnosing practitioners were analyzed. Clinical photos were assessed by 3 expert raters to determine the importance of these characteristics. CT scan findings were abstracted and compared between the two diagnoses. The "classic" triad of narrow forehead, biparietal widening, and hypotelorism was present in only 14% of patients with MCS. Ninety-eight percent of patients in both groups had a palpable metopic ridge. The photographic finding of narrow forehead and pterional constriction was present in all patients with MCS, but only in 11.2% and 2.8% of patients with MR. On CT scan, the presence of 3 or more MCS findings was diagnostic of MCS in 96% of patients. Patients with MCS were more likely to present before 6 months of age (66% vs. 32%). Patients with MCS tend to present earlier than those with MR. Upon physical examination, the relationship between the lateral frontal bone and the lateral orbit is important in distinguishing between the two diagnoses. A CT scan can be helpful in making the diagnosis not to confirm a closed suture but to identify 3 or more MCS characteristics.

Ferns of the Blue Ridge

Treesearch

Arnold Krochmal; Connie Krochmal

1979-01-01

The forests and open fields of the Blue Ridge provide ideal growing conditions for a number of ferns. Since some of these are evergreen, ferns can be seen in the area during every month of the year. Ferns are old members of the plant kingdom, and fossil ancestors are common in slate, shale, and coal. All ferns belong to the Pteridophytes, a group that also includes...

Tsunami-generated boulder ridges in Lake Tahoe, California-Nevada

USGS Publications Warehouse

Moore, J.G.; Schweickert, R.A.; Robinson, J.E.; Lahren, M.M.; Kitts, Christopher A.

2006-01-01

An array of east-trending ridges 1-2 m high and up to 2 km long occurs on the Tahoe City shelf, a submerged wave-cut bench <15 m deep in the northwest sector of the lake. The shelf is just north of the amphitheater of the giant subaqueous 10 km3 McKinney Bay landslide, which originated on the west wall of Lake Tahoe. Images from a submersible camera show that the ridges are composed of loose piles of boulders and cobbles that lie directly on poorly consolidated, fine-bedded lake beds deposited in an ancestral Lake Tahoe. Dredge hauls from landslide distal blocks, as well as from the walls of the re-entrant of the landslide, recovered similar lake sediments. The McKinney Bay landslide generated strong currents, which rearranged previous glacial-derived debris into giant ripples creating the boulder ridges. The uncollapsed part of the sediment bench, including the Tahoe City shelf, poses a hazard because it may fail again, producing a landslide and damaging waves. ?? 2006 Geological Society of America.

FINAL REPORT: DOE CONTRACT NUMBER FG0205ER64026 Biological Neutron Scattering: A Collaboration with the Oak Ridge Center for Structural Molecular Biology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Trewhella, Jill

2011-01-12

The overarching goal of this project was to promote applications of small-angle scattering in structural molecular biology by providing model examples of cutting edge applications that demonstrate the unique capabilities and potential of the DOE national user facilities at Oak Ridge, especially the newly commissioned BioSANS. The approach taken was three-fold: (1) to engage in high impact collaborative research projects that would benefit from small-angle neutron scattering to both demonstrate the power of the technique while expanding the potential user community; (2) to provide access to scattering facilities established at the University of Utah to as broad a set ofmore » researchers as possible to increase the expertise in small-angle scattering generally; and (3) to develop new methods and tools for small-angle scattering. To these ends, three major research collaborations were pursued that resulted in a significant body of published work where neutron scattering and contrast variation played a major role. These major collaborations involved studies of protein complexes involved in (1) bacterial transcription regulation and adaptive response (a DOE/BER priority area); (2) regulation of cardiac muscle; and (3) neuronal disorders. In addition, to broaden the impact of the project, smaller collaborative efforts were supported that used either small-angle X-ray or neutron scattering. Finally, the DOE supported facilities at the University of Utah were made available to researchers on a service basis and a number of independent groups took advantage of this opportunity. In all of this work, there was an emphasis on the training of students and post docs in scattering techniques, and a set of publications (a book chapter, a review, and an encyclopedia article) were produced to guide the non-specialist potential user of scattering techniques in successful applications of the techniques. We also developed a suite of user friendly web-based computational tools

The geology of the Oceanographer Transform: The ridge-transform intersection

NASA Astrophysics Data System (ADS)

Karson, J. A.; Fox, P. J.; Sloan, H.; Crane, K. T.; Kidd, W. S. F.; Bonatti, E.; Stroup, J. B.; Fornari, D. J.; Elthon, D.; Hamlyn, P.; Casey, J. F.; Gallo, D. G.; Needham, D.; Sartori, R.

1984-06-01

Seven dives in the submersible ALVIN and four deep-towed (ANGUS) camera lowerings have been made at the eastern ridge-transform intersection of the Oceanographer Transform with the axis of the Mid-Atlantic Ridge. These data constrain our understanding of the processes that create and shape the distinctive morphology that is characteristic of slowly-slipping ridge-transform-ridge plate boundaries. Although the geological relationships observed in the rift valley floor in the study area are similar to those reported for the FAMOUS area, we observe a distinct change in the character of the rift valley floor with increasing proximity to the transform. Over a distance of approximately ten kilometers the volcanic constructional terrain becomes increasingly more disrupted by faulting and degraded by mass wasting. Moreover, proximal to the transform boundary, faults with orientations oblique to the trend of the rift valley are recognized. The morphology of the eastern rift valley wall is characterized by inward-facing scarps that are ridge-axis parallel, but the western rift valley wall, adjacent to the active transform zone, is characterized by a complex fault pattern defined by faults exhibiting a wide range of orientations. However, even for transform parallel faults no evidence for strike-slip displacement is observed throughout the study area and evidence for normal (dip-slip) displacement is ubiquitous. Basalts, semi-consolidated sediments (chalks, debris slide deposits) and serpentinized ultramafic rocks are recovered from localities within or proximal to the rift valley. The axis of accretion-principal transform displacement zone intersection is not clearly established, but appears to be located along the E-W trending, southern flank of the deep nodal basin that defines the intersection of the transform valley with the rift floor.

Oak Ridge Health Studies Phase 1 report, Volume 2: Part D, Dose Reconstruction Feasibility Study. Tasks 6, Hazard summaries for important materials at the Oak Ridge Reservation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bruce, G.M.; Walker, L.B.; Widner, T.E.

1993-09-01

The purpose of Task 6 of Oak Ridge Phase I Health Studies is to provide summaries of current knowledge of toxic and hazardous properties of materials that are important for the Oak Ridge Reservation. The information gathered in the course of Task 6 investigations will support the task of focussing any future health studies efforts on those operations and emissions which have likely been most significant in terms of off-site health risk. The information gathered in Task 6 efforts will likely also be of value to individuals evaluating the feasibility of additional health,study efforts (such as epidemiological investigations) in themore » Oak Ridge area and as a resource for citizens seeking information on historical emissions.« less

Three-dimensional Gravity Modeling of Ocean Core Complexes at the Central Indian Ridge

NASA Astrophysics Data System (ADS)

Kim, S. S.; Chandler, M. T.; Pak, S. J.; Son, S. K.

2017-12-01

The spatial distribution of ocean core complexes (OCCs) on mid-ocean ridge flanks can indicate the variation of magmatism and tectonic extension at a given spreading center. A recent study revealed 11 prominent OCCs developed along the middle portion of the Central Indian Ridge (CIR) based on the high-resolution shipboard bathymetry. The CIR is located between the Carlsberg Ridge and the Indian Ocean triple junction. The detailed morphotectonic interpretations from the recent study suggested that the middle ridge segments of the CIR were mainly developed through tectonic extension with little magmatism. Furthermore, the OCCs exposed by detachment faults appear to the main host for active off-axis hydrothermal circulations. Here we form a three-dimensional gravity model to investigate the crustal structures of OCCs developed between 12oS and 14oS at the CIR. These OCCs exhibit domal topographic highs with corrugated surface. The rock samples from these areas include deep-seated rocks such as serpentinized harzburgite and gabbro. A typical gravity study on mid-ocean ridges assumes a constant density contrast along the water-crust interface and constant crustal thickness and removes its gravitational contributions and thermal effects of lithospheric cooling from the free-air gravity anomaly. This approach is effective to distinguish anomalous regions that deviate from the applied crustal and thermal models. The oceanic crust around the OCCs, however, tends to be thinned due to detachment faulting and tectonic extension. In this study, we include multi-layers with different density contrast and variable thickness to approximate gravity anomalies resulting from the OCCs. In addition, we aim to differentiate the geophysical characteristics of the OCCs from the nearby ridge segments and infer tectonic relationship between the OCCs and ridges.

Chlorine in mid-ocean ridge magmas: Evidence for assimilation of seawater-influenced components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michael, P.J.; Schilling, J.G.

1989-12-01

Suites of depleted MORB glasses from the fast-spreading Pacific-Nazca Ridge at 28{degree}S and 32{degree}S and the slow-spreading eastern boundary of the Juan Fernandez microplate were analyzed for chlorine by electron microprobe. The Cl concentrations in FeTi basalts exceed by a factor of 5 to 10 the amounts that can be generated by fractional crystallization of the primitive magmas. Selective melting or breakdown of amphibole and incorporation of Cl-rich brine contained in the wall rocks may be important processes. A magmatic source for the additional Cl and H{sub 2}O cannot be ruled out on geochemical grounds but is physically unrealistic becausemore » it requires that large volumes of magma have crystallized and exsolved a Cl-rich vapor phase that has somehow migrated to a small magma chamber. Excess Cl in evolved magmas is best developed in evolved MORB from propagating or overlapping spreading centers such as the Galapagos Spreading Center at 85{degree}W and 95{degree}W and the west ridge of the Juan Fernandez microplate. Cl overenrichment has not been observed on slow-spreading ridges including the eastern ridge of the Juan Fernandez microplate, the Southwest Indian Ridge, and the mid-Atlantic Ridge. The assimilation of hydrothermally altered material could influence the concentration and isotopic ratios of other elements which have low abundances in MORB relative to seawater.« less

Nature of the seismic crust at the Aegir Ridge: A downward continuation approach

NASA Astrophysics Data System (ADS)

Rai, Abhishek; Breivik, Asbj|rn; Mjelde, Rolf; Hanan, Barry; Ito, Garrett; Sayit, Kaan; Howell, Sam; Vogt, Peter; Pedersen, Rolf-Birger

2013-04-01

The marine seismic data are influenced by variations in the thickness and velocity of the water column which causes fluctuations in the arrival times of seismic phases. Downward continuation of the ocean-bottom seismometer data are used to remove the contributions of the water column by bring the shot and receiver at a common datum such as the seafloor. Additionally, the downward continuation focus the seismic energy and hence improves the resolution. We apply the downward continuation technique to analyze the OBS data collected along the eastern shoulder of the Aegir Ridge. The Aegir Ridge is an extinct spreading ridge in the North-East Atlantic ocean. Its proximity to the active Iceland hot-spot makes it important for understanding the process of hotspot-ridge interaction during the Oligocene. We present results of an OBS experiment, supported by single channel streamer, gravity and magnetic observations. Usable seismic data from 20 OBSs distributed along ~550 km length of the profile reveal the variations in crustal thickness and seismic velocities. Regional magnetic anomalies show a faster spreading rate towards the north and a slower spreading towards the southern end near the Iceland hotspot during the active period of the ridge. However, the observed and the predicted crustal thickness show an opposite trend. We interpret this anti-correlation between the seafloor spreading rate and the crustal thickness as a result of the interaction between the Iceland hotspot and the Aegir Ridge.

Environmental and community controls on plant canopy chemistry in a Mediterranean-type ecosystem.

PubMed

Dahlin, Kyla M; Asner, Gregory P; Field, Christopher B

2013-04-23

Understanding how and why plant communities vary across space has long been a goal of ecology, yet parsing the relative importance of different influences has remained a challenge. Species-specific models are not generalizable, whereas broad plant functional type models lack important detail. Here we consider plant trait patterns at the local scale and ask whether plant chemical traits are more closely linked to environmental gradients or to changes in species composition. We used the visible-to-shortwave infrared (VSWIR) spectrometer of the Carnegie Airborne Observatory to develop maps of four plant chemical traits--leaf nitrogen per mass, leaf carbon per mass, leaf water concentration, and canopy water content--across a diverse Mediterranean-type ecosystem (Jasper Ridge Biological Preserve, CA). For all four traits, plant community alone was the strongest predictor of trait variation (explaining 46-61% of the heterogeneity), whereas environmental gradients accounted for just one fourth of the variation in the traits. This result emphasizes the critical role that species composition plays in mediating nutrient and carbon cycling within and among different communities. Environmental filtering and limits to similarity can act strongly, simultaneously, in a spatially heterogeneous environment, but the local-scale environmental gradients alone cannot account for the variation across this landscape.

Description of the terrestrial ecology of the Oak Ridge Environmental Research Park

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kitchings, T.; Mann, L.K.

1976-10-01

The Environmental Sciences Division at Oak Ridge National Laboratory has begun to develop research and administrative foundations necessary to establish and operate an Environmental Research Park (ERP) on the Energy Research and Development Administration Reservation at Oak Ridge, Tennessee. Important in developing a functional research area is a description and inventory of the species and ecosystems which comprise the Research Park. This report describes some of the floral and faunal components of the Oak Ridge Reservation. Emphasis is placed on the relationship of faunal communities to the vegetation type in which they occur. Unique vegetational areas and rare and endangeredmore » species are also discussed.« less

Complications related to bone augmentation procedures of localized defects in the alveolar ridge. A retrospective clinical study.

PubMed

Jensen, Anders Torp; Jensen, Simon Storgård; Worsaae, Nils

2016-06-01

This retrospective clinical study aims to evaluate complications after augmentation of localized bone defects of the alveolar ridge. From standardized registrations, the following complications related to bone augmentation procedures were recorded: soft tissue dehiscence, infection, sensory disturbance, additional augmentation procedures needed, and early implant failure. A total of 223 patients (132 women, 91 men; mean age 23.5 years; range 17-65 years) with 331 bone defects had bone augmentation performed into which 350 implants were placed. Soft tissue dehiscence occurred in 1.7 % after GBR procedures, 25.9 % after staged horizontal ridge augmentation, and 18.2 % after staged vertical ridge augmentation. Infections were diagnosed in 2 % after GBR procedures, 12.5 % after sinus floor elevation (SFE) (transcrestal technique), 5 % after staged SFE, 11 % after staged horizontal ridge augmentation, and 9 % after staged vertical ridge augmentation. Additional augmentation procedures were needed in 2 % after GBR procedures, 37 % after staged horizontal ridge augmentation, and 9 % after staged vertical ridge augmentation. A total of six early implant failures occurred (1.7 %), four after GBR procedures (1.6 %), and two (12 %) after staged vertical ridge augmentation. Predictable methods exist to augment localized defects in the alveolar ridge, as documented by low complication rates and high early implant survival rates.

Alveolar ridge keratosis - a retrospective clinicopathological study

PubMed Central

2013-01-01

Background Alveolar ridge keratosis (ARK) is a distinct, benign clinicopathological entity, characterized by a hyperkeratotic plaque or patch that occurs on the alveolar edentulous ridge or on the retromolar trigone, considered to be caused by chronic frictional trauma. The aim of this retrospective study is to present the clinicopathological features of 23 consecutive cases of ARK. Material and methods The 23 biopsy samples of ARK were selected and pathological features were revised (keratosis, acanthosis, surface architecture, and inflammation). Factors such as the patient’s gender, age, anatomical location, tobacco and alcohol use were analyzed. Results Sixteen out of the 23 cases studied were men and 7 women with a mean age of 55.05 (age ranged from 17 to 88 years). Thirteen cases had a history of tobacco habit, amongst whom, 4 also presented alcohol consumption. All the cases presented only unilateral lesions. Nineteen cases involved the retromolar trigone while 4 cases involved edentulous alveolar ridges. When observed microscopically, the lesions were mainly characterized by moderate to important hyperorthokeratosis. Inflammation was scanty or absent. In four of the cases, the presence of melanin pigment in the superficial corium or in the cytoplasm of macrophages was detected. None of the cases showed any features of dysplasia. Conclusion Our results reveal that ARK is a benign lesion. However, the high prevalence of smokers amongst the patients might suggest that some potentially malignant disorders such as tobacco associated leukoplakia may clinically mimic ARK. PMID:23587097

Alveolar ridge keratosis--a retrospective clinicopathological study.

PubMed

Bellato, Lorenzo; Martinelli-Kläy, Carla P; Martinelli, Celso R; Lombardi, Tommaso

2013-04-16

Alveolar ridge keratosis (ARK) is a distinct, benign clinicopathological entity, characterized by a hyperkeratotic plaque or patch that occurs on the alveolar edentulous ridge or on the retromolar trigone, considered to be caused by chronic frictional trauma. The aim of this retrospective study is to present the clinicopathological features of 23 consecutive cases of ARK. The 23 biopsy samples of ARK were selected and pathological features were revised (keratosis, acanthosis, surface architecture, and inflammation). Factors such as the patient's gender, age, anatomical location, tobacco and alcohol use were analyzed. Sixteen out of the 23 cases studied were men and 7 women with a mean age of 55.05 (age ranged from 17 to 88 years). Thirteen cases had a history of tobacco habit, amongst whom, 4 also presented alcohol consumption. All the cases presented only unilateral lesions. Nineteen cases involved the retromolar trigone while 4 cases involved edentulous alveolar ridges. When observed microscopically, the lesions were mainly characterized by moderate to important hyperorthokeratosis. Inflammation was scanty or absent. In four of the cases, the presence of melanin pigment in the superficial corium or in the cytoplasm of macrophages was detected. None of the cases showed any features of dysplasia. Our results reveal that ARK is a benign lesion. However, the high prevalence of smokers amongst the patients might suggest that some potentially malignant disorders such as tobacco associated leukoplakia may clinically mimic ARK.

View Toward 'Vera Rubin Ridge' on Mount Sharp, Mars

NASA Image and Video Library

2017-07-11

This look ahead from NASA's Curiosity Mars rover includes four geological layers to be examined by the mission, and higher reaches of Mount Sharp beyond the planned study area. The redder rocks of the foreground are part of the Murray formation. Pale gray rocks in the middle distance of the right half of the image are in the Clay Unit. A band between those terrains is "Vera Rubin Ridge." Rounded brown knobs beyond the Clay Unit are in the Sulfate Unit, beyond which lie higher portions of the mountain. The view combines six images taken with the rover's Mast Camera (Mastcam) on Jan. 24, 2017, during the 1,589th Martian day, or sol, of Curiosity's work on Mars, when the rover was still more than half a mile (about a kilometer) north of Vera Rubin Ridge. The panorama has been white-balanced so that the colors of the rock and sand materials resemble how they would appear under daytime lighting conditions on Earth. It spans from east-southeast on the left to south on the right. The Sol 1589 location was just north of the waypoint labeled "Ogunquit Beach" on a map of the area that also shows locations of the Murray formation, Vera Rubin Ridge, Clay Unit and Sulfate Unit. The ridge was informally named in early 2017 in memory of Vera Cooper Rubin (1928-2016), whose astronomical observations provided evidence for the existence of the universe's dark matter. Annotated and full resolution TIFF files are available at https://photojournal.jpl.nasa.gov/catalog/PIA21716

Central ridge of Newfoundland: Little explored, potential large

DOE Office of Scientific and Technical Information (OSTI.GOV)

Silva, N.R. De

The Central ridge on the northeastern Grand Banks off Newfoundland represents a large area with known hydrocarbon accumulations and the potential for giant fields. It covers some 17,000 sq km with water less than 400 m deep. The first major hydrocarbon discovery on the Newfoundland Grand Banks is giant Hibernia field in the Jeanne d'Arc basin. Hibernia field, discovered in 1979, has reserves of 666 million bbl and is due onstream in 1997. Since Hibernia, 14 other discoveries have been made on the Grand Banks, with three on the Central ridge. Oil was first discovered on Central Ridge in 1980more » with the Mobil et al. South Tempest G-88 well. In 1982 gas was discovered with the Mobil et al. North Dana I-43 well 30 km northeast of the earlier discovery. In 1983 gas and condensate were discovered with the Husky-Bow Valley et al. Trave E-87 well 20 km south of the South Tempest well. These discoveries are held under significant discovery licenses and an additional 2,400 sq km are held under exploration licenses. The paper discusses the history of the basin, the reservoir source traps, and the basin potential.« less

III/V nano ridge structures for optical applications on patterned 300 mm silicon substrate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kunert, B.; Guo, W.; Mols, Y.

We report on an integration approach of III/V nano ridges on patterned silicon (Si) wafers by metal organic vapor phase epitaxy (MOVPE). Trenches of different widths (≤500 nm) were processed in a silicon oxide (SiO{sub 2}) layer on top of a 300 mm (001) Si substrate. The MOVPE growth conditions were chosen in a way to guarantee an efficient defect trapping within narrow trenches and to form a box shaped ridge with increased III/V volume when growing out of the trench. Compressively strained InGaAs/GaAs multi-quantum wells with 19% indium were deposited on top of the fully relaxed GaAs ridges as an activemore » material for optical applications. Transmission electron microcopy investigation shows that very flat quantum well (QW) interfaces were realized. A clear defect trapping inside the trenches is observed whereas the ridge material is free of threading dislocations with only a very low density of planar defects. Pronounced QW photoluminescence (PL) is detected from different ridge sizes at room temperature. The potential of these III/V nano ridges for laser integration on Si substrates is emphasized by the achieved ridge volume which could enable wave guidance and by the high crystal quality in line with the distinct PL.« less

77 FR 24976 - Environmental Impact Statement for the Proposed Wheatgrass Ridge Wind Project, Fort Hall Indian...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-26

... Proposed Wheatgrass Ridge Wind Project, Fort Hall Indian Reservation, Idaho AGENCY: Bureau of Indian... proposed Wheatgrass Ridge Wind Project on the Fort Hall Indian Reservation, Idaho. FOR FURTHER INFORMATION... INFORMATION: The BIA is canceling work on this EIS because the proponent of the Wheatgrass Ridge Wind Project...

76 FR 40354 - Notice of Cancellation of Environmental Impact Statement for the Proposed Crowned Ridge Wind...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-08

... Environmental Impact Statement for the Proposed Crowned Ridge Wind Energy Center Project, Codington and Grant... to design, construct, operate, and maintain a 150-megawatt Crowned Ridge Wind Energy Center Project... that memorandum, I have terminated the NEPA process for NextEra's proposed Crowned Ridge Wind Energy...

Thermal structure, magmatism, and evolution of fast-spreading mid-ocean ridges

NASA Astrophysics Data System (ADS)

Shah, Anjana K.

2001-07-01

We use thin-plate flexural models and high-resolution magnetic field data to constrain magmatic and tectonic processes at fast-spreading mid-ocean ridges, and how these processes evolve over time. Models are constructed to predict axial high topography and gravity for a given thermal structure of the crust and mechanical structure of the lithosphere. Whereas previous models predicted the high is due to a narrow column of buoyant material extending to 10's of kilometers depth in the mantle, we find the high can also be produced by a narrow zone of crustal melt, and lithosphere which thickens rapidly with distance from the axis. We consider the effects of plastic weakening using a yield strength envelope to map bending stresses associated with deflections. Near-surface stresses are extensional at distances which closely resemble regions of normal fault growth at certain axial highs, suggesting bending stresses play a significant role in normal faulting at fast-spreading ridges. We further develop the model to simulate ridge jumps. We fit topography and gravity data of a plume-influenced region which has recently experienced a ridge jump. Steep sides of the new high are best modeled as constructional features. An abandoned ridge remains at the old axis due to plate strengthening associated with crustal cooling. By fitting more than one profile along-axis, we constrain the accretion history at the new ridge. We also predict than an inconsistency between bull's eye mantle Bouguer anomaly lows and a nearly constant along-axis depth can be resolved by assuming a low density zone below the axis widens near the bull's eye center. Finally, we study high-resolution magnetic field data at two regions of the East Pacific Rise with different eruptive histories. The anomalies are used to map relatively fresh pillow mounds, void space created by lava tubes and lobate flows, and dike complexes which extend along the length of recent fissure eruptions. The dikes suggest episodic

The Cocos Ridge drives collision of Panama with northwestern South America

NASA Astrophysics Data System (ADS)

LaFemina, Peter; Govers, Rob; Mora-Paez, Hector; Geirsson, Halldor; Cmacho, Eduardo

2015-04-01

The collision of the Panamanian isthmus with northwestern South America is thought to have initiated as early as Oligocene - Miocene time (23-25 Ma) based on geologic and geophysical data and paleogeographic reconstructions. This collision was driven by eastward-directed subduction beneath northwestern South America. Cocos - Caribbean convergence along the Middle America Trench, and Nazca - Caribbean oblique convergence along the South Panama Deformed Belt have resulted in complex deformation of the southwestern Caribbean since Miocene - Pliocene time. Subduction and collision of the aseismic Cocos Ridge is thought to have initiated <3.5 Ma and has been linked to: 1) late Miocene-Pliocene cessation of volcanism and uplift of the Cordillera de Talamanca; 2) Quaternary migration of the volcanic arc toward the back-arc; 3) Quaternary to present deformation within the Central Costa Rica Deformed Belt; 4) Quaternary to present shortening across the fore-arc Fila Costeña fold and thrust belt and back-arc North Panama Deformed Belt (NPDB); 5) Quaternary to present outer fore-arc uplift of Nicoya Peninsula above the seamount domain, and the Osa and Burica peninsulas above the ridge; and 6) Pleistocene to present northwestward motion of the Central American Fore Arc (CAFA) and northeastward motion of the Panama Region. We investigate the geodynamic effects of Cocos Ridge collision on motion of the Panama Region with a new geodynamic model. The model is compared to a new 1993-2015 GPS-derived three-dimensional velocity field for the western Caribbean and northwestern South America. Specifically, we test the hypotheses that the Cocos Ridge is the main driver for upper plate deformation in the western Caribbean. Our models indicate that Cocos Ridge collision drives northwest-directed motion of the CAFA and the northeast-directed motion of the Panama Region. The Panama Region is driven into the Caribbean across the NPDB and into northwestern South America, which is also

Discovery of a black smoker vent field and vent fauna at the Arctic Mid-Ocean Ridge

PubMed Central

Pedersen, Rolf B.; Rapp, Hans Tore; Thorseth, Ingunn H.; Lilley, Marvin D.; Barriga, Fernando J. A. S.; Baumberger, Tamara; Flesland, Kristin; Fonseca, Rita; Früh-Green, Gretchen L.; Jorgensen, Steffen L.

2010-01-01

The Arctic Mid-Ocean Ridge (AMOR) represents one of the most slow-spreading ridge systems on Earth. Previous attempts to locate hydrothermal vent fields and unravel the nature of venting, as well as the provenance of vent fauna at this northern and insular termination of the global ridge system, have been unsuccessful. Here, we report the first discovery of a black smoker vent field at the AMOR. The field is located on the crest of an axial volcanic ridge (AVR) and is associated with an unusually large hydrothermal deposit, which documents that extensive venting and long-lived hydrothermal systems exist at ultraslow-spreading ridges, despite their strongly reduced volcanic activity. The vent field hosts a distinct vent fauna that differs from the fauna to the south along the Mid-Atlantic Ridge. The novel vent fauna seems to have developed by local specialization and by migration of fauna from cold seeps and the Pacific. PMID:21119639

3D free-air gravity anomaly modeling for the Southeast Indian Ridge

NASA Astrophysics Data System (ADS)

Girolami, Chiara; Heyde, Ingo; Rinaldo Barchi, Massimiliano; Pauselli, Cristina

2016-04-01

In this study we analyzed the free-air gravity anomalies measured on the northwestern part of the Southeast Indian Ridge (hereafter SEIR) during the BGR cruise INDEX2012 with RV FUGRO GAUSS. The survey area covered the ridge from the Rodriguez Triple Junction along about 500 km towards the SSE direction. Gravity and magnetic data were measured along 65 profiles with a mean length of 60 km running approximately perpendicular to the ridge axis. The final gravity data were evaluated every 20 seconds along each profile. This results in a sampling interval of about 100 m. The mean spacing of the profiles is about 7 km. Together with the geophysical data also the bathymetry was measured along all profiles with a Kongsberg Simrad EM122 multibeam echosounder system. Previous studies reveal that the part of the ridge covered by the high resolution profiles is characterized by young geologic events (the oldest one dates back to 1 Ma) and that the SEIR is an intermediate spreading ridge. We extended the length of each profile to the area outside the ridge, integrating INDEX2012 high resolution gravity and bathymetric data with low resolution data derived from satellite radar altimeter measurements. The 3D forward gravity modeling made it possible to reconstruct a rough crustal density model for an extended area (about 250000 km2) of the SEIR. We analyzed the gravity signal along those 2D sections which cross particular geological features (uplifted areas, accommodation zones, hydrothermal fields and areas with hints for extensional processes e.g. OCCs) in order to establish a correlation between the gravity anomaly signal and the surface geology. We started with a simple "layer-cake" geologic model consisting of four density bodies which represent the sea, upper oceanic crust, lower oceanic crust and the upper mantle. Considering that in the study area the oceanic crust is young, we did not include the sediment layer. We assumed the density values of these bodies considering

50 CFR Table 25 to Part 679 - Bowers Ridge Habitat Conservation Zone

Code of Federal Regulations, 2014 CFR

2014-10-01

... 50 Wildlife and Fisheries 13 2014-10-01 2014-10-01 false Bowers Ridge Habitat Conservation Zone 25 Table 25 to Part 679 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND... ALASKA Pt. 679, Table 25 Table 25 to Part 679—Bowers Ridge Habitat Conservation Zone Area number Name...

50 CFR Table 25 to Part 679 - Bowers Ridge Habitat Conservation Zone

Code of Federal Regulations, 2011 CFR

2011-10-01

... 50 Wildlife and Fisheries 11 2011-10-01 2011-10-01 false Bowers Ridge Habitat Conservation Zone 25 Table 25 to Part 679 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND... ALASKA Pt. 679, Table 25 Table 25 to Part 679—Bowers Ridge Habitat Conservation Zone Area number Name...

50 CFR Table 25 to Part 679 - Bowers Ridge Habitat Conservation Zone

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 9 2010-10-01 2010-10-01 false Bowers Ridge Habitat Conservation Zone 25 Table 25 to Part 679 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND... ALASKA Pt. 679, Table 25 Table 25 to Part 679—Bowers Ridge Habitat Conservation Zone Area number Name...

50 CFR Table 25 to Part 679 - Bowers Ridge Habitat Conservation Zone

Code of Federal Regulations, 2012 CFR

2012-10-01

... 50 Wildlife and Fisheries 13 2012-10-01 2012-10-01 false Bowers Ridge Habitat Conservation Zone 25 Table 25 to Part 679 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND... ALASKA Pt. 679, Table 25 Table 25 to Part 679—Bowers Ridge Habitat Conservation Zone Area number Name...

50 CFR Table 25 to Part 679 - Bowers Ridge Habitat Conservation Zone

Code of Federal Regulations, 2013 CFR

2013-10-01

... 50 Wildlife and Fisheries 13 2013-10-01 2013-10-01 false Bowers Ridge Habitat Conservation Zone 25 Table 25 to Part 679 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND... ALASKA Pt. 679, Table 25 Table 25 to Part 679—Bowers Ridge Habitat Conservation Zone Area number Name...

77 FR 18243 - Environmental Management Site-Specific Advisory Board, Oak Ridge Reservation

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-27

... of Energy Information Center, 1 Science.gov Way, Oak Ridge, Tennessee 37830. FOR FURTHER INFORMATION... 2001, EM-90, Oak Ridge, TN 37831. Phone (865) 241-3315; Fax (865) 576-0956 or email: [email protected]gov or check the Web site at www.oakridge.doe.gov/em/ssab . SUPPLEMENTARY INFORMATION: Purpose of the...

77 FR 38275 - Environmental Management Site-Specific Advisory Board, Oak Ridge Reservation

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-27

... of Energy Information Center, 1 Science.gov Way, Oak Ridge, Tennessee 37830. FOR FURTHER INFORMATION... 2001, EM-90, Oak Ridge, TN 37831. Phone (865) 241-3315; Fax (865) 576-0956 or email: [email protected]gov or check the Web site at www.oakridge.doe.gov/em/ssab . SUPPLEMENTARY INFORMATION: Purpose of the...

77 FR 23470 - Environmental Management Site-Specific Advisory Board, Oak Ridge Reservation

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-19

... Energy Information Center, 1 Science.gov Way, Oak Ridge, Tennessee 37830. FOR FURTHER INFORMATION CONTACT...-90, Oak Ridge, TN 37831. Phone (865) 241-3315; Fax (865) 576-0956 or email: [email protected]gov or check the Web site at www.oakridge.doe.gov/em/ssab . SUPPLEMENTARY INFORMATION: Purpose of the Board...

76 FR 64948 - Decision To Evaluate a Petition To Designate a Class of Employees From Oak Ridge National...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-19

... Employees From Oak Ridge National Laboratory (X-10), Oak Ridge, TN, To Be Included in the Special Exposure... decision to evaluate a petition to designate a class of employees from Oak Ridge National Laboratory (X-10... Laboratory (X-10) Location: Oak Ridge, Tennessee. Job Titles and/or Job Duties: All contractor employees...

Origins and Driving Mechanisms for Shallow Methane Accumulations on the Svyatogor Ridge, Fram Strait

NASA Astrophysics Data System (ADS)

Waghorn, K. A.; Bunz, S.; Plaza-Faverola, A. A.; Westvig, I. M.; Johnson, J. E.

2015-12-01

The Svyatogor Ridge, located west of the Knipovich Spreading Ridge (KR) and south of the Molloy Transform Fault (MTF), is hypothesized to have once been the south tip of Vestnesa Ridge; a large sediment drift that was offset during the last 2 Ma along the MTF. The sedimentary cover across Svyatogor Ridge is limited, compared to Vestnesa Ridge, and basement outcrops are identified ~850 mbsf on the apex of the ridge. Despite the limited sedimentation, and its unique location at the intersection between the KR and MTF, Svyatogor Ridge has evidence of shallow gas accumulations; a strong BSR indicating a gas hydrate and underlying free gas system, and fluid flow pathways to the seafloor culminating in pockmarks. Using a high-resolution P-Cable 3D seismic survey, 2D seismic, and multibeam bathymetry data, we investigate how tectonic and sedimentary regimes have influenced the formation of a well-developed gas hydrate system. Sedimentation related with the Vestnesa drift on Svyatogor Ridge is interpreted to have begun ~2-3 Ma. The young age of the underlying oceanic crust, and subsequent synrift sediments below drift strata, suggests gas production from early Miocene aged hydrocarbon source identified in ODP Site 909 to the west, is unlikely in this region. Additionally, given the ultra-slow, magma limited spreading regime of the KR, we do not expect significant thermogenic methane generation from shallow magmatic sources. Therefore, in addition to some microbial gas production, Johnson et al. (2015) hypothesize a contribution from an abiotic source may explain the well-developed gas hydrate system. Large-scale basement faults identified in the seismic data are interpreted as detachment faults, which have exhumed relatively young ultramafic rocks. These detachment faults act as conduits for fluid flow, allowing circulation of seawater to drive serpentinization and subsequently act as pathways for fluids and abiotic methane to reach the shallow subsurface. This work aims

Teacher-implemented joint attention intervention: pilot randomized controlled study for preschoolers with autism.

PubMed

Lawton, Kathy; Kasari, Connie

2012-08-01

The vast majority of children with an autism spectrum disorder (ASD) attend public preschools at some point in their childhood. Community preschool practices often are not evidence based, and almost none target the prelinguistic core deficits of ASD. This study investigated the effectiveness of public preschool teachers implementing a validated intervention (the Joint Attention and Symbolic Play/Engagement and Regulation intervention; JASP/ER) on a core deficit of autism, initiating joint attention. Sixteen dyads (preschoolers with ASD and the public school teachers who worked in the child's classroom) were randomly assigned to the 6-week JASP/ER intervention or a control group. At the end of the intervention, JASP/ER teachers used more JASP/ER strategies than the control teachers, and JASP/ER preschoolers used more joint attention in their classroom than control children. Additionally, JASP/ER children spent more time in supported engagement and less time in object engagement than control preschoolers on a taped play interaction. Findings suggest that teachers were able to improve a core deficit of children with ASD in a public preschool context. © 2012 American Psychological Association

Grain-Size Dynamics Beneath Mid-Ocean Ridges: Implications for Permeability and Melt Extraction

NASA Astrophysics Data System (ADS)

Turner, A. J.; Katz, R. F.; Behn, M. D.

2014-12-01

The permeability structure of the sub-ridge mantle plays an important role in how melt is focused and extracted at mid-ocean ridges. Permeability is controlled by porosity and the grain size of the solid mantle matrix, which is in turn controlled by the deformation conditions. To date, models of grain size evolution and mantle deformation have not been coupled to determine the influence of spatial variations in grain-size on the permeability structure at mid-ocean ridges. Rather, current models typically assume a constant grain size for the whole domain [1]. Here, we use 2-D numerical models to evaluate the influence of grain-size variability on the permeability structure beneath a mid-ocean ridge and use these results to speculate on the consequences for melt focusing and extraction. We construct a two-dimensional, single phase model for the steady-state grain size beneath a mid-ocean ridge. The model employs a composite rheology of diffusion creep, dislocation creep, dislocation accommodated grain boundary sliding, and a brittle stress limiter. Grain size is calculated using the "wattmeter" model of Austin and Evans [2]. We investigate the sensitivity of the model to global variations in grain growth exponent, potential temperature, spreading-rate, and grain boundary sliding parameters [3,4]. Our model predicts that permeability varies by two orders of magnitude due to the spatial variability of grain size within the expected melt region of a mid-ocean ridge. The predicted permeability structure suggests grain size may promote focusing of melt towards the ridge axis. Furthermore, the calculated grain size structure should focus melt from a greater depth than models that exclude grain-size variability. Future work will involve evaluating this hypothesis by implementing grain-size dynamics within a two-phase mid-ocean ridge model. The developments of such a model will be discussed. References: [1] R. F. Katz, Journal of Petrology, volume 49, issue 12, page 2099

Temporal variation in spectral detection thresholds of substrate and vegetation in AVIRIS images

NASA Technical Reports Server (NTRS)

Sabol, Donald E., Jr.; Roberts, Dar A.; Smith, Milton O.; Adams, John B.

1992-01-01

The ability to map changes over large surface areas over time is one of the advantages in using remote sensing as a monitoring tool. Temporal changes in the surface may be gradual, making them difficult to detect in the short-term, and because they commonly occur at the subpixel scale, they may be difficult to detect in the long-term as well. Also, subtle changes may be real or merely an artifact of image noise. It is, therefore, necessary to understand the factors that limit the detection of surface materials in evaluating temporal data. The spectral detectability of vegetation and soil in the 1990 July and October Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) data of Jasper Ridge, CA was evaluated and compared.

Early Cretaceous adakitic magmatism in central eastern China controlled by ridge subduction