Qubits and quantum Hamiltonian computing performances for operating a digital Boolean 1/2-adder

NASA Astrophysics Data System (ADS)

Dridi, Ghassen; Faizy Namarvar, Omid; Joachim, Christian

2018-04-01

Quantum Boolean (1 + 1) digits 1/2-adders are designed with 3 qubits for the quantum computing (Qubits) and 4 quantum states for the quantum Hamiltonian computing (QHC) approaches. Detailed analytical solutions are provided to analyse the time operation of those different 1/2-adder gates. QHC is more robust to noise than Qubits and requires about the same amount of energy for running its 1/2-adder logical operations. QHC is faster in time than Qubits but its logical output measurement takes longer.

MULTI-CHANNEL ELECTRIC PULSE HEIGHT ANALYZER

DOEpatents

Gallagher, J.D. et al.

1960-11-22

An apparatus is given for converting binary information into coded decimal form comprising means, in combination with a binary adder, a live memory and a source of bigit pulses, for synchronizing the bigit pulses and the adder output pulses; a source of digit pulses synchronized with every fourth bigit pulse; means for generating a conversion pulse in response to the time coincidence of the adder output pulse and a digit pulse: means having a delay equal to two bigit pulse periods coupling the adder output with the memory; means for promptly impressing said conversion pulse on the input of said memory: and means having a delay equal to one bigit pulse period for again impressing the conversion pulse on the input of the memory whereby a fourth bigit adder pulse results in the insertion into the memory of second, third and fourth bigits.

Benchmarks of a III-V TFET technology platform against the 10-nm CMOS FinFET technology node considering basic arithmetic circuits

NASA Astrophysics Data System (ADS)

Strangio, S.; Palestri, P.; Lanuzza, M.; Esseni, D.; Crupi, F.; Selmi, L.

2017-02-01

In this work, a benchmark for low-power digital applications of a III-V TFET technology platform against a conventional CMOS FinFET technology node is proposed. The analysis focuses on full-adder circuits, which are commonly identified as representative of the digital logic environment. 28T and 24T topologies, implemented in complementary-logic and transmission-gate logic, respectively, are investigated. Transient simulations are performed with a purpose-built test-bench on each single-bit full adder solution. The extracted delays and energy characteristics are post-processed and translated into figures-of-merit for multi-bit ripple-carry-adders. Trends related to the different full-adder implementations (for the same device technology platform) and to the different technology platforms (for the same full-adder topology) are presented and discussed.

Pipeline active filter utilizing a booth type multiplier

NASA Technical Reports Server (NTRS)

Nathan, Robert (Inventor)

1987-01-01

Multiplier units of the modified Booth decoder and carry-save adder/full adder combination are used to implement a pipeline active filter wherein pixel data is processed sequentially, and each pixel need only be accessed once and multiplied by a predetermined number of weights simultaneously, one multiplier unit for each weight. Each multiplier unit uses only one row of carry-save adders, and the results are shifted to less significant multiplier positions and one row of full adders to add the carry to the sum in order to provide the correct binary number for the product Wp. The full adder is also used to add this product Wp to the sum of products .SIGMA.Wp from preceding multiply units. If m.times.m multiplier units are pipelined, the system would be capable of processing a kernel array of m.times.m weighting factors.

High speed capacitor-inverter based carbon nanotube full adder.

PubMed

Navi, K; Rashtian, M; Khatir, A; Keshavarzian, P; Hashemipour, O

2010-03-18

Carbon Nanotube filed-effect transistor (CNFET) is one of the promising alternatives to the MOS transistors. The geometry-dependent threshold voltage is one of the CNFET characteristics, which is used in the proposed Full Adder cell. In this paper, we present a high speed Full Adder cell using CNFETs based on majority-not (Minority) function. Presented design uses eight transistors and eight capacitors. Simulation results show significant improvement in terms of delay and power-delay product in comparison to contemporary CNFET Adder Cells. Simulations were carried out using HSPICE based on CNFET model with 0.6 V VDD.

Recoded and nonrecoded trinary signed-digit adders and multipliers with redundant-bit representations

NASA Astrophysics Data System (ADS)

Cherri, Abdallah K.; Alam, Mohammed S.

1998-07-01

Highly-efficient two-step recoded and one-step nonrecoded trinary signed-digit (TSD) carry-free adders subtracters are presented on the basis of redundant-bit representation for the operands digits. It has been shown that only 24 (30) minterms are needed to implement the two-step recoded (the one-step nonrecoded) TSD addition for any operand length. Optical implementation of the proposed arithmetic can be carried out by use of correlation- or matrix-multiplication-based schemes, saving 50% of the system memory. Furthermore, we present four different multiplication designs based on our proposed recoded and nonrecoded TSD adders. Our multiplication designs require a small number of reduced minterms to generate the multiplication partial products. Finally, a recently proposed pipelined iterative-tree algorithm can be used in the TSD adders multipliers; consequently, efficient use of all available adders can be made.

Recoded and nonrecoded trinary signed-digit adders and multipliers with redundant-bit representations.

PubMed

Cherri, A K; Alam, M S

1998-07-10

Highly-efficient two-step recoded and one-step nonrecoded trinary signed-digit (TSD) carry-free adders-subtracters are presented on the basis of redundant-bit representation for the operands' digits. It has been shown that only 24 (30) minterms are needed to implement the two-step recoded (the one-step nonrecoded) TSD addition for any operand length. Optical implementation of the proposed arithmetic can be carried out by use of correlation- or matrix-multiplication-based schemes, saving 50% of the system memory. Furthermore, we present four different multiplication designs based on our proposed recoded and nonrecoded TSD adders. Our multiplication designs require a small number of reduced minterms to generate the multiplication partial products. Finally, a recently proposed pipelined iterative-tree algorithm can be used in the TSD adders-multipliers; consequently, efficient use of all available adders can be made.

Design of Low-Complexity and High-Speed Coplanar Four-Bit Ripple Carry Adder in QCA Technology

NASA Astrophysics Data System (ADS)

Balali, Moslem; Rezai, Abdalhossein

2018-07-01

Quantum-dot Cellular Automata (QCA) technology is a suitable technology to replace CMOS technology due to low-power consumption, high-speed and high-density devices. Full adder has an important role in the digital circuit design. This paper presents and evaluates a novel single-layer four-bit QCA Ripple Carry Adder (RCA) circuit. The developed four-bit QCA RCA circuit is based on novel QCA full adder circuit. The developed circuits are simulated using QCADesigner tool version 2.0.3. The simulation results show that the developed circuits have advantages in comparison with existing single-layer and multilayer circuits in terms of cell count, area occupation and circuit latency.

Design of Low-Complexity and High-Speed Coplanar Four-Bit Ripple Carry Adder in QCA Technology

NASA Astrophysics Data System (ADS)

Balali, Moslem; Rezai, Abdalhossein

2018-03-01

Quantum-dot Cellular Automata (QCA) technology is a suitable technology to replace CMOS technology due to low-power consumption, high-speed and high-density devices. Full adder has an important role in the digital circuit design. This paper presents and evaluates a novel single-layer four-bit QCA Ripple Carry Adder (RCA) circuit. The developed four-bit QCA RCA circuit is based on novel QCA full adder circuit. The developed circuits are simulated using QCADesigner tool version 2.0.3. The simulation results show that the developed circuits have advantages in comparison with existing single-layer and multilayer circuits in terms of cell count, area occupation and circuit latency.

Isolation and characterization at cholinergic nicotinic receptors of a neurotoxin from the venom of the Acanthophis sp. Seram death adder.

PubMed

Wickramaratna, Janith C; Fry, Bryan G; Loiacono, Richard E; Aguilar, Marie-Isabel; Alewood, Paul F; Hodgson, Wayne C

2004-07-15

The present study describes the isolation of the first neurotoxin (acantoxin IVa) from Acanthophis sp. Seram death adder venom and an examination of its activity at nicotinic acetylcholine receptor (nAChR) subtypes. Acantoxin IVa (MW 6815; 0.1-1.0 microM) caused concentration-dependent inhibition of indirect twitches (0.1 Hz, 0.2 ms, supramaximal V) and inhibited contractile responses to exogenous nicotinic agonists in the chick biventer cervicis nerve-muscle, confirming that this toxin is a postsynaptic neurotoxin. Acantoxin IVa (1-10 nM) caused pseudo-irreversible antagonism at skeletal muscle nAChR with an estimated pA2 of 8.36+/-0.17. Acantoxin IVa was approximately two-fold less potent than the long-chain (Type II) neurotoxin, alpha-bungarotoxin. With a pKi value of 4.48, acantoxin IVa was approximately 25,000 times less potent than alpha-bungarotoxin at alpha7-type neuronal nAChR. However, in contrast to alpha-bungarotoxin, acantoxin IVa completely inhibited specific [3H]-methyllycaconitine (MLA) binding in rat hippocampus homogenate. Acantoxin IVa had no activity at ganglionic nAChR, alpha4beta2 subtype neuronal nAChR or cytisine-resistant [3H]-epibatidine binding sites. While long-chain neurotoxin resistant [3H]-MLA binding in hippocampus homogenate requires further investigation, we have shown that a short-chain (Type I) neurotoxin is capable of fully inhibiting specific [3H]-MLA binding.

Power efficient, clock gated multiplexer based full adder cell using 28 nm technology

NASA Astrophysics Data System (ADS)

Gupta, Ashutosh; Murgai, Shruti; Gulati, Anmol; Kumar, Pradeep

2016-03-01

Clock gating is a leading technique used for power saving. Full adders is one of the basic circuit that can be found in maximum VLSI circuits. In this paper clock gated multiplexer based full adder cell is implemented on 28 nm technology. We have designed a full adder cell using a multiplexer with a gated clock without degrading its performance of the cell. We have negative latch circuit for generating gated clock. This gated clock is used to control the multiplexer based full adder cell. The circuit has been synthesized on kintex FPGA through Xilinx ISE Design Suite 14.7 using 28 nm technology in Verilog HDL. The circuit has been simulated on Modelsim 10.3c. The design is verified using System Verilog on QuestaSim in UVM environment. The total power of the circuit has been reduced by 7.41% without degrading the performance of original circuit. The power has been calculated using XPower Analyzer tool of XILINX ISE DESIGN SUITE 14.3.

Linear induction accelerator

DOEpatents

Buttram, M.T.; Ginn, J.W.

1988-06-21

A linear induction accelerator includes a plurality of adder cavities arranged in a series and provided in a structure which is evacuated so that a vacuum inductance is provided between each adder cavity and the structure. An energy storage system for the adder cavities includes a pulsed current source and a respective plurality of bipolar converting networks connected thereto. The bipolar high-voltage, high-repetition-rate square pulse train sets and resets the cavities. 4 figs.

Linear induction accelerator and pulse forming networks therefor

DOEpatents

Buttram, Malcolm T.; Ginn, Jerry W.

1989-01-01

A linear induction accelerator includes a plurality of adder cavities arranged in a series and provided in a structure which is evacuated so that a vacuum inductance is provided between each adder cavity and the structure. An energy storage system for the adder cavities includes a pulsed current source and a respective plurality of bipolar converting networks connected thereto. The bipolar high-voltage, high-repetition-rate square pulse train sets and resets the cavities.

Building a Library for Microelectronics Verification with Topological Constraints

DTIC Science & Technology

2017-03-01

Tables 1d, 3b); 1-bit full adder cell (Fig. 1), respectively. Table 5. Frequency distributions for the genus of logically equivalent circuit...Figure 1 shows that switching signal pairs produces logically- equivalent topologies of the 1-bit full adder cell with three values of the genus (g = 3 [1...case], 4, 5, 6). Figure 1. Frequency distribution for logically equivalent circuit topologies of the 1-bit full adder cell (2048) in Table 1(e

Inductive voltage adder (IVA) for submillimeter radius electron beam

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mazarakis, M.G.; Poukey, J.W.; Maenchen, J.E.

The authors have already demonstrated the utility of inductive voltage adder accelerators for production of small-size electron beams. In this approach, the inductive voltage adder drives a magnetically immersed foilless diode to produce high-energy (10--20 MeV), high-brightness pencil electron beams. This concept was first demonstrated with the successful experiments which converted the linear induction accelerator RADLAC II into an IVA fitted with a small 1-cm radius cathode magnetically immersed foilless diode (RADLAC II/SMILE). They present here first validations of extending this idea to mm-scale electron beams using the SABRE and HERMES-III inductive voltage adders as test beds. The SABRE experimentsmore » are already completed and have produced 30-kA, 9-MeV electron beams with envelope diameter of 1.5-mm FWHM. The HERMES-III experiments are currently underway.« less

Demonstration of an optoelectronic interconnect architecture for a parallel modified signed-digit adder and subtracter

NASA Astrophysics Data System (ADS)

Sun, Degui; Wang, Na-Xin; He, Li-Ming; Weng, Zhao-Heng; Wang, Daheng; Chen, Ray T.

1996-06-01

A space-position-logic-encoding scheme is proposed and demonstrated. This encoding scheme not only makes the best use of the convenience of binary logic operation, but is also suitable for the trinary property of modified signed- digit (MSD) numbers. Based on the space-position-logic-encoding scheme, a fully parallel modified signed-digit adder and subtractor is built using optoelectronic switch technologies in conjunction with fiber-multistage 3D optoelectronic interconnects. Thus an effective combination of a parallel algorithm and a parallel architecture is implemented. In addition, the performance of the optoelectronic switches used in this system is experimentally studied and verified. Both the 3-bit experimental model and the experimental results of a parallel addition and a parallel subtraction are provided and discussed. Finally, the speed ratio between the MSD adder and binary adders is discussed and the advantage of the MSD in operating speed is demonstrated.

The adder (Vipera berus) in Southern Altay Mountains: population characteristics, distribution, morphology and phylogenetic position

PubMed Central

Cui, Shaopeng; Luo, Xiao; Chen, Daiqiang; Sun, Jizhou; Chu, Hongjun

2016-01-01

As the most widely distributed snake in Eurasia, the adder (Vipera berus) has been extensively investigated in Europe but poorly understood in Asia. The Southern Altay Mountains represent the adder’s southern distribution limit in Central Asia, whereas its population status has never been assessed. We conducted, for the first time, field surveys for the adder at two areas of Southern Altay Mountains using a combination of line transects and random searches. We also described the morphological characteristics of the collected specimens and conducted analyses of external morphology and molecular phylogeny. The results showed that the adder distributed in both survey sites and we recorded a total of 34 sightings. In Kanas river valley, the estimated encounter rate over a total of 137 km transects was 0.15 ± 0.05 sightings/km. The occurrence of melanism was only 17%. The small size was typical for the adders in Southern Altay Mountains in contrast to other geographic populations of the nominate subspecies. A phylogenetic tree obtained by Bayesian Inference based on DNA sequences of the mitochondrial cytochrome b (1,023 bp) grouped them within the Northern clade of the species but failed to separate them from the subspecies V. b. sachalinensis. Our discovery extends the distribution range of V. berus and provides a basis for further researches. We discuss the hypothesis that the adder expands its distribution border to the southwest along the mountains’ elevation gradient, but the population abundance declines gradually due to a drying climate. PMID:27602300

Photonic crystal based 1-bit full-adder optical circuit by using ring resonators in a nonlinear structure

NASA Astrophysics Data System (ADS)

Alipour-Banaei, Hamed; Seif-Dargahi, Hamed

2017-05-01

In this paper we proposed a novel design for realizing all optical 1*bit full-adder based on photonic crystals. The proposed structure was realized by cascading two optical 1-bit half-adders. The final structure is consisted of eight optical waveguides and two nonlinear resonant rings, created inside rod type two dimensional photonic crystal with square lattice. The structure has ;X;, ;Y; and ;Z; as input and ;SUM; and ;CARRY; as output ports. The performance and functionality of the proposed structure was validated by means of finite difference time domain method.

All-optical negabinary adders using Mach-Zehnder interferometer

NASA Astrophysics Data System (ADS)

Cherri, A. K.

2011-02-01

In contrast to optoelectronics, all-optical adders are proposed where all-optical signals are used to represent the input numbers and the control signals. In addition, the all-optical adders use the negabinary modified signed-digit number representation (an extension of the negabinary number system) to represent the input digits. Further, the ultra-speed of the designed circuits is achieved due to the use of ultra-fast all-optical switching property of the semiconductor optical amplifier and Mach-Zehnder interferometer (SOA-MZI). Furthermore, two-bit per digit binary encoding scheme is employed to represent the trinary values of the negabinary modified signed-digits.

Silicon microdisk-based full adders for optical computing.

PubMed

Ying, Zhoufeng; Wang, Zheng; Zhao, Zheng; Dhar, Shounak; Pan, David Z; Soref, Richard; Chen, Ray T

2018-03-01

Due to the projected saturation of Moore's law, as well as the drastically increasing trend of bandwidth with lower power consumption, silicon photonics has emerged as one of the most promising alternatives that has attracted a lasting interest due to the accessibility and maturity of ultra-compact passive and active integrated photonic components. In this Letter, we demonstrate a ripple-carry electro-optic 2-bit full adder using microdisks, which replaces the core part of an electrical full adder by optical counterparts and uses light to carry signals from one bit to the next with high bandwidth and low power consumption per bit. All control signals of the operands are applied simultaneously within each clock cycle. Thus, the severe latency issue that accumulates as the size of the full adder increases can be circumvented, allowing for an improvement in computing speed and a reduction in power consumption. This approach paves the way for future high-speed optical computing systems in the post-Moore's law era.

Electro-optical full-adder/full-subtractor based on graphene-silicon switches

NASA Astrophysics Data System (ADS)

Zivarian, Hossein; Zarifkar, Abbas; Miri, Mehdi

2018-01-01

A compact footprint, low-power consumption, and high-speed operation electro-optical full-adder/full-subtractor based on graphene-silicon electro-optical switches is demonstrated. Each switch consists of a Mach-Zehnder interferometer in which few-layer graphene is embedded in a silicon slot waveguide to construct phase shifters. The presented structure can be used as full-adder and full-subtractor simultaneously. The analysis of various factors such as extinction ratio, power consumption, and operation speed has been presented. As will be shown, the proposed electro-optical switch has a minimum extinction ratio of 36.21 dB, maximum insertion loss about 0.18 dB, high operation speed of 180 GHz, and is able to work with a low applied voltage about 1.4 V. Also, the extinction ratio and insertion loss of the full-adder/full-subtractor are about 30 and 1.5 dB, respectively, for transfer electric modes at telecommunication wavelength of 1.55 μm.

The symmetric MSD encoder for one-step adder of ternary optical computer

NASA Astrophysics Data System (ADS)

Kai, Song; LiPing, Yan

2016-08-01

The symmetric Modified Signed-Digit (MSD) encoding is important for achieving the one-step MSD adder of Ternary Optical Computer (TOC). The paper described the symmetric MSD encoding algorithm in detail, and developed its truth table which has nine rows and nine columns. According to the truth table, the state table was developed, and the optical-path structure and circuit-implementation scheme of the symmetric MSD encoder (SME) for one-step adder of TOC were proposed. Finally, a series of experiments were designed and performed. The observed results of the experiments showed that the scheme to implement SME was correct, feasible and efficient.

A decimal carry-free adder

NASA Astrophysics Data System (ADS)

Nikmehr, Hooman; Phillips, Braden; Lim, Cheng-Chew

2005-02-01

Recently, decimal arithmetic has become attractive in the financial and commercial world including banking, tax calculation, currency conversion, insurance and accounting. Although computers are still carrying out decimal calculation using software libraries and binary floating-point numbers, it is likely that in the near future, all processors will be equipped with units performing decimal operations directly on decimal operands. One critical building block for some complex decimal operations is the decimal carry-free adder. This paper discusses the mathematical framework of the addition, introduces a new signed-digit format for representing decimal numbers and presents an efficient architectural implementation. Delay estimation analysis shows that the adder offers improved performance over earlier designs.

Adder bite: an uncommon cause of compartment syndrome in northern hemisphere

PubMed Central

2010-01-01

Snakebite envenomation is an uncommon condition in the northern hemisphere, but requires high vigilance with regard to both the systemic effects of the venom and the locoregional impact on the soft tissues. Bites from the adder, Vipera Berus, may have serious clinical consequences due to systemic effects. A case of a 44-year-old man is reported. The patient was bitten in the right hand. He developed fasciotomy-requiring compartment syndrome of the upper limb. Recognition of this most seldom complication of an adder bite is vital to save the limb. We recommend that the classical signs and symptoms of compartment syndrome serve as indication for surgical decompression. PMID:20854675

Modular Adder Designs Using Optimal Reversible and Fault Tolerant Gates in Field-Coupled QCA Nanocomputing

NASA Astrophysics Data System (ADS)

Bilal, Bisma; Ahmed, Suhaib; Kakkar, Vipan

2018-02-01

The challenges which the CMOS technology is facing toward the end of the technology roadmap calls for an investigation of various logical and technological solutions to CMOS at the nano scale. Two such paradigms which are considered in this paper are the reversible logic and the quantum-dot cellular automata (QCA) nanotechnology. Firstly, a new 3 × 3 reversible and universal gate, RG-QCA, is proposed and implemented in QCA technology using conventional 3-input majority voter based logic. Further the gate is optimized by using explicit interaction of cells and this optimized gate is then used to design an optimized modular full adder in QCA. Another configuration of RG-QCA gate, CRG-QCA, is then proposed which is a 4 × 4 gate and includes the fault tolerant characteristics and parity preserving nature. The proposed CRG-QCA gate is then tested to design a fault tolerant full adder circuit. Extensive comparisons of gate and adder circuits are drawn with the existing literature and it is envisaged that our proposed designs perform better and are cost efficient in QCA technology.

Mississippi | Midmarket Solar Policies in the United States | Solar

Science.gov Websites

DG adder of $0.025/kWh (total estimated 7 to 7.5 cents per kWh) RECs: The customer retains ownership of RECs. If the customer receives benefits from the DG adder while selling electricity to the utility , then the RECs are transferred from the customer to the utility. Meter aggregation: Not specified

Design of a Radiographic Integrated Test Stand (RITS) Based on a Voltage Adder, To Drive a Diode Immersed in a High Magnetic Field

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bailey, V.L.; Corcoran, P.; Droemer, D.

Recent experiments (1) have adapted existing magne-tically insulated induction voltage adders (Sabre, Hermes III) to drive a 10 MV diode immersed in magnetic fields as high as 50 T. In such a diode, an electron beam of tens of kA can be confined by the magnetic field to a diameter of about 1 mm, and when it strikes a high-Z anode it can create a bremsstrahlung x-ray source intense enough to radiograph massive objects with high resolution. RITS is an adder system designed specially to drive such diodes, and it will be used to develop and exploit them. As inmore » other adder-based pulsers such as Sabre, Hermes III, and Kalif-Heliq the induction cells have amorphous- iron cores, and the pulse-forming system consists of water dielectric pulse lines and self-closing water switches that are pulse-charged from Marx-charged intermediate water capacitors through laser-triggered Rimfire switches. An oil prepulse switch in series with each pulse line is designed to reduce cathode prepulse to less than ± 5 kV, and a means is provided to bias the cathode and avoid negative prepulse entirely. The RITS pulse-forming system consists of two modules. Each module has one Marx that charges two 3 MV intermediate stores, each of which charges three 7.8 ohm pulselines, making six pulselines per module. The two modules in concert can supply 1.35 MV, 50 ns pulses to a twelve-cell adder and thus drive a 16 MV diode with a single pulse. The 1.35 MV induction cells each have a single-point feed, from which a single, slotted azimuthal oil transmission line distributes energy uniformly around the cell. The modules can also be pulsed separately at different times, either to power two 8 MV adders that each drive one of two closely-spaced cathodes immersed in a common magnetic field, or to provide two separate pulses to a common six- cell adder and a single 8 NIV diode; in these two-pulse modes, the spacing of the two 50 ns pulses may be chosen to be anything from a few hundred ns upward. The use of only one pulse line per cell has been shown to increase the extent to which the cell voltages can vary with the timing of closure of the water switches. This and all other functions of RITS have been simulated in detail, and a conservative electrical design has been developed. This will be illustrated, along with the conceptual design of a pulse-sorting network that can couple two pulselines efilciently to one cell when the two RITS modules drive a common adder in two-pulse mode.« less

Binary full adder, made of fusion gates, in a subexcitable Belousov-Zhabotinsky system

NASA Astrophysics Data System (ADS)

Adamatzky, Andrew

2015-09-01

In an excitable thin-layer Belousov-Zhabotinsky (BZ) medium a localized perturbation leads to the formation of omnidirectional target or spiral waves of excitation. A subexcitable BZ medium responds to asymmetric local perturbation by producing traveling localized excitation wave-fragments, distant relatives of dissipative solitons. The size and life span of an excitation wave-fragment depend on the illumination level of the medium. Under the right conditions the wave-fragments conserve their shape and velocity vectors for extended time periods. I interpret the wave-fragments as values of Boolean variables. When two or more wave-fragments collide they annihilate or merge into a new wave-fragment. States of the logic variables, represented by the wave-fragments, are changed in the result of the collision between the wave-fragments. Thus, a logical gate is implemented. Several theoretical designs and experimental laboratory implementations of Boolean logic gates have been proposed in the past but little has been done cascading the gates into binary arithmetical circuits. I propose a unique design of a binary one-bit full adder based on a fusion gate. A fusion gate is a two-input three-output logical device which calculates the conjunction of the input variables and the conjunction of one input variable with the negation of another input variable. The gate is made of three channels: two channels cross each other at an angle, a third channel starts at the junction. The channels contain a BZ medium. When two excitation wave-fragments, traveling towards each other along input channels, collide at the junction they merge into a single wave-front traveling along the third channel. If there is just one wave-front in the input channel, the front continues its propagation undisturbed. I make a one-bit full adder by cascading two fusion gates. I show how to cascade the adder blocks into a many-bit full adder. I evaluate the feasibility of my designs by simulating the evolution of excitation in the gates and adders using the numerical integration of Oregonator equations.

Design and implementation of the one-step MSD adder of optical computer.

PubMed

Song, Kai; Yan, Liping

2012-03-01

On the basis of the symmetric encoding algorithm for the modified signed-digit (MSD), a 7*7 truth table that can be realized with optical methods was developed. And based on the truth table, the optical path structures and circuit implementations of the one-step MSD adder of ternary optical computer (TOC) were designed. Experiments show that the scheme is correct, feasible, and efficient. © 2012 Optical Society of America

ARC length control for plasma welding

NASA Technical Reports Server (NTRS)

Iceland, William F. (Inventor)

1988-01-01

A control system to be used with a plasma arc welding apparatus is disclosed. The plasma arc welding apparatus includes a plasma arc power supply, a contactor, and an electrode assembly for moving the electrode relative to a work piece. The electrode assembly is raised or lowered by a drive motor. The present apparatus includes a plasma arc adapter connected across the power supply to measure the voltage across the plasma arc. The plasma arc adapter forms a dc output signal input to a differential amplifier. A second input is defined by an adjustable resistor connected to a dc voltage supply to permit operator control. The differential amplifier forms an output difference signal provided to an adder circuit. The adder circuit then connects with a power amplifier which forms the driving signal for the motor. In addition, the motor connects to a tachometor which forms a feedback signal delivered to the adder to provide damping, therby avoiding servo loop overshoot.

Multi-valued logic gates based on ballistic transport in quantum point contacts.

PubMed

Seo, M; Hong, C; Lee, S-Y; Choi, H K; Kim, N; Chung, Y; Umansky, V; Mahalu, D

2014-01-22

Multi-valued logic gates, which can handle quaternary numbers as inputs, are developed by exploiting the ballistic transport properties of quantum point contacts in series. The principle of a logic gate that finds the minimum of two quaternary number inputs is demonstrated. The device is scalable to allow multiple inputs, which makes it possible to find the minimum of multiple inputs in a single gate operation. Also, the principle of a half-adder for quaternary number inputs is demonstrated. First, an adder that adds up two quaternary numbers and outputs the sum of inputs is demonstrated. Second, a device to express the sum of the adder into two quaternary digits [Carry (first digit) and Sum (second digit)] is demonstrated. All the logic gates presented in this paper can in principle be extended to allow decimal number inputs with high quality QPCs.

A novel reversible logic gate and its systematic approach to implement cost-efficient arithmetic logic circuits using QCA.

PubMed

Ahmad, Peer Zahoor; Quadri, S M K; Ahmad, Firdous; Bahar, Ali Newaz; Wani, Ghulam Mohammad; Tantary, Shafiq Maqbool

2017-12-01

Quantum-dot cellular automata, is an extremely small size and a powerless nanotechnology. It is the possible alternative to current CMOS technology. Reversible QCA logic is the most important issue at present time to reduce power losses. This paper presents a novel reversible logic gate called the F-Gate. It is simplest in design and a powerful technique to implement reversible logic. A systematic approach has been used to implement a novel single layer reversible Full-Adder, Full-Subtractor and a Full Adder-Subtractor using the F-Gate. The proposed Full Adder-Subtractor has achieved significant improvements in terms of overall circuit parameters among the most previously cost-efficient designs that exploit the inevitable nano-level issues to perform arithmetic computing. The proposed designs have been authenticated and simulated using QCADesigner tool ver. 2.0.3.

Self-Assembly of Large Amyloid Fibers

NASA Astrophysics Data System (ADS)

Ridgley, Devin M.

Functional amyloids found throughout nature have demonstrated that amyloid fibers are potential industrial biomaterials. This work introduces a new "template plus adder" cooperative mechanism for the spontaneous self-assembly of micrometer sized amyloid fibers. A short hydrophobic template peptide induces a conformation change within a highly alpha-helical adder protein to form beta-sheets that continue to assemble into micrometer sized amyloid fibers. This study utilizes a variety of proteins that have template or adder characteristics which suggests that this mechanism may be employed throughout nature. Depending on the amino acid composition of the proteins used the mixtures form amyloid fibers of a cylindrical ( 10 mum diameter, 2 GPa Young's modulus) or tape (5- 10 mum height, 10-20 mum width and 100-200 MPa Young's modulus) morphology. Processing conditions are altered to manipulate the morphology and structural characteristics of the fibers. Spectroscopy is utilized to identify certain amino acid groups that contribute to the self-assembly process. Aliphatic amino acids (A, I, V and L) are responsible for initiating conformation change of the adder proteins to assemble into amyloid tapes. Additional polyglutamine segments (Q-blocks) within the protein mixtures will form Q hydrogen bonds to reinforce the amyloid structure and form a cylindrical fiber of higher modulus. Atomic force microscopy is utilized to delineate the self-assembly of amyloid tapes and cylindrical fibers from protofibrils (15-30 nm width) to fibers (10-20 mum width) spanning three orders of magnitude. The aliphatic amino acid content of the adder proteins' alpha-helices is a good predictor of high density beta-sheet formation within the protein mixture. Thus, it is possible to predict the propensity of a protein to undergo conformation change into amyloid structures. Finally, Escherichia coli is genetically engineered to express a template protein which self-assembles into large amyloid fibers when combined with extracellular myoglobin, an adder protein. The goal of this thesis is to produce, manipulate and characterize the self-assembly of large amyloid fibers for their potential industrial biomaterial applications. The techniques used throughout this study outline various methods to design and engineer amyloid fibers of a tailored modulus and morphology. Furthermore, the mechanisms described here may offer some insight into naturally occurring amyloid forming systems.

An optimal adder-based hardware architecture for the DCT/SA-DCT

NASA Astrophysics Data System (ADS)

Kinane, Andrew; Muresan, Valentin; O'Connor, Noel

2005-07-01

The explosive growth of the mobile multimedia industry has accentuated the need for ecient VLSI implemen- tations of the associated computationally demanding signal processing algorithms. This need becomes greater as end-users demand increasingly enhanced features and more advanced underpinning video analysis. One such feature is object-based video processing as supported by MPEG-4 core profile, which allows content-based in- teractivity. MPEG-4 has many computationally demanding underlying algorithms, an example of which is the Shape Adaptive Discrete Cosine Transform (SA-DCT). The dynamic nature of the SA-DCT processing steps pose significant VLSI implementation challenges and many of the previously proposed approaches use area and power consumptive multipliers. Most also ignore the subtleties of the packing steps and manipulation of the shape information. We propose a new multiplier-less serial datapath based solely on adders and multiplexers to improve area and power. The adder cost is minimised by employing resource re-use methods. The number of (physical) adders used has been derived using a common sub-expression elimination algorithm. Additional energy eciency is factored into the design by employing guarded evaluation and local clock gating. Our design implements the SA-DCT packing with minimal switching using ecient addressing logic with a transpose mem- ory RAM. The entire design has been synthesized using TSMC 0.09µm TCBN90LP technology yielding a gate count of 12028 for the datapath and its control logic.

Single instruction computer architecture and its application in image processing

NASA Astrophysics Data System (ADS)

Laplante, Phillip A.

1992-03-01

A single processing computer system using only half-adder circuits is described. In addition, it is shown that only a single hard-wired instruction is needed in the control unit to obtain a complete instruction set for this general purpose computer. Such a system has several advantages. First it is intrinsically a RISC machine--in fact the 'ultimate RISC' machine. Second, because only a single type of logic element is employed the entire computer system can be easily realized on a single, highly integrated chip. Finally, due to the homogeneous nature of the computer's logic elements, the computer has possible implementations as an optical or chemical machine. This in turn suggests possible paradigms for neural computing and artificial intelligence. After showing how we can implement a full-adder, min, max and other operations using the half-adder, we use an array of such full-adders to implement the dilation operation for two black and white images. Next we implement the erosion operation of two black and white images using a relative complement function and the properties of erosion and dilation. This approach was inspired by papers by van der Poel in which a single instruction is used to furnish a complete set of general purpose instructions and by Bohm- Jacopini where it is shown that any problem can be solved using a Turing machine with one entry and one exit.

Development of an optical parallel logic device and a half-adder circuit for digital optical processing

NASA Technical Reports Server (NTRS)

Athale, R. A.; Lee, S. H.

1978-01-01

The paper describes the fabrication and operation of an optical parallel logic (OPAL) device which performs Boolean algebraic operations on binary images. Several logic operations on two input binary images were demonstrated using an 8 x 8 device with a CdS photoconductor and a twisted nematic liquid crystal. Two such OPAL devices can be interconnected to form a half-adder circuit which is one of the essential components of a CPU in a digital signal processor.

Programmable full-adder computations in communicating three-dimensional cell cultures.

PubMed

Ausländer, David; Ausländer, Simon; Pierrat, Xavier; Hellmann, Leon; Rachid, Leila; Fussenegger, Martin

2018-01-01

Synthetic biologists have advanced the design of trigger-inducible gene switches and their assembly into input-programmable circuits that enable engineered human cells to perform arithmetic calculations reminiscent of electronic circuits. By designing a versatile plug-and-play molecular-computation platform, we have engineered nine different cell populations with genetic programs, each of which encodes a defined computational instruction. When assembled into 3D cultures, these engineered cell consortia execute programmable multicellular full-adder logics in response to three trigger compounds.

Implementation of trinary logic in a polarization encoded optical shadow-casting scheme.

PubMed

Rizvi, R A; Zaheer, K; Zubairy, M S

1991-03-10

The design of various multioutput trinary combinational logic units by a polarization encoded optical shadow-casting (POSC) technique is presented. The POSC modified algorithm is employed to design and implement these logic elements in a trinary number system with separate and simultaneous generation of outputs. A detailed solution of the POSC logic equations for a fixed source plane and a fixed decoding mask is given to obtain input pixel coding for a trinary half-adder, full adder, and subtractor.

An approach to the optical MSD adder

NASA Astrophysics Data System (ADS)

Takahashi, Hideya; Matsushita, Kenji; Shimizu, Eiji

1990-07-01

The intrinsic parallelism of optical elements for computation is presently taken fuller advantage of than heretofore possible through an optical implementation of the modified signed digit (MSD) number system, which yields carry-free addition and subtraction. In the present optical implementation of the MSD system, optical phase data are used to preclude negative value representation. Attention is given to an MSD adder array for addition operations on two n-digit trinary numbers; the output is composed of n + 1 trinary digits.

[An overview on envenomings inflicted by the Common adder (Vipera berus) and their treatment in Hungary. Facts and beliefs -- part I].

PubMed

Malina, Tamás; Babocsay, Gergely; Krecsák, László; Schuller, Péter; Zacher, Gábor; Vasas, Gábor

2012-07-15

Consequences of bites by the Common adder (Vipera berus) were reviewed in this study. Patients bitten by snakes from different populations may develop variable symptoms due to geographical venom variation. The correct diagnosis of snake bites and the knowledge of the distribution of venomous snake taxa have a crucial impact on snake bite therapy. The characteristic symptoms of patients bitten by V. berus in Hungary are highlighted. The habitat characteristics, seasonal activity and the Hungarian distribution of the adder are described based on literature data, museum specimens and field observations. However, envenomings are uncommon in Hungary, the annual 3 to 4 incidents have to be taken seriously, regardless of the age and actual health condition of the patients. Contrary to beliefs persisting both among laymen and professionals, the venom of V. berus is powerful. Medical observation of the patients is necessary in the first 5 to 6 hours. Any systemic symptom or progression of the edema requires hospital admission.

Optical Computing. Organization of the 1993 Photonics Science Topical Meetings Held in Palm Springs, California on March 16 - 19, 1993. Technical Digest Series, Volume 7

DTIC Science & Technology

1993-03-19

network Implementation using 9:20 am asymmetric Fabry-Perot modulators, Andrew Jennings, Brian OWA3 Multiwavelength optical half adder, Pochi Yeh... multiwavelength optical half adder. (p. 68) nects. (p. 96) 9:40 am 2:50 pm OWA4 Wavelength multiplexed computer-generated volume OWC3 Content addramble...ATMOS and OSCAR are RACE projects, mentioned in the text shape this into new systems architectures, ("optical ether"). Broadly speaking, this has led to

Modeling and Optimization of Optical Half Adder in Two Dimensional Photonic Crystals

NASA Astrophysics Data System (ADS)

Sonth, Mahesh V.; Soma, Savita; Gowre, Sanjaykumar C.; Biradar, Nagashettappa

2018-05-01

The output of photonic integrated devices is enhanced using crystal waveguides and cavities but optimization of these devices is a topic of research. In this paper, optimization of the optical half adder in two-dimensional (2-D) linear photonic crystals using four symmetric T-shaped waveguides with 180° phase shift inputs is proposed. The input section of a T-waveguide acts as a beam splitter, and the output section acts as a power combiner. The constructive and destructive interference phenomenon will provide an output optical power. Output port Cout will receive in-phase power through the 180° phase shifter cavity designed near the junction. The optical half adder is modeled in a 2-D photonic crystal using the finite difference time domain method (FDTD). It consists of a cubic lattice with an array of 39 × 43 silicon rods of radius r 0.12 μm and 0.6 μm lattice constant a. The extinction ratio r e of 11.67 dB and 12.51 dB are achieved at output ports using the RSoft FullWAVE-6.1 software package.

a High-Level Technique for Estimation and Optimization of Leakage Power for Full Adder

NASA Astrophysics Data System (ADS)

Shrivas, Jayram; Akashe, Shyam; Tiwari, Nitesh

2013-06-01

Optimization of power is a very important issue in low-voltage and low-power application. In this paper, we have proposed power gating technique to reduce leakage current and leakage power of one-bit full adder. In this power gating technique, we use two sleep transistors i.e., PMOS and NMOS. PMOS sleep transistor is inserted between power supply and pull up network. And NMOS sleep transistor is inserted between pull down network and ground terminal. These sleep transistors (PMOS and NMOS) are turned on when the circuit is working in active mode. And sleep transistors (PMOS and NMOS) are turned off when circuit is working in standby mode. We have simulated one-bit full adder and compared with the power gating technique using cadence virtuoso tool in 45 nm technology at 0.7 V at 27°C. By applying this technique, we have reduced leakage current from 2.935 pA to 1.905 pA and leakage power from 25.04μw to 9.233μw. By using this technique, we have reduced leakage power up to 63.12%.

Molecular evidence for the first records of facultative parthenogenesis in elapid snakes

PubMed Central

Sanders, K. L.

2018-01-01

Parthenogenesis is a form of asexual reproduction by which embryos develop from unfertilized eggs. Parthenogenesis occurs in reptiles; however, it is not yet known to occur in the widespread elapid snakes (Elapidae), which include well-known taxa such as cobras, mambas, taipans and sea snakes. Here, we describe the production of viable parthenogens in two species of Australo-Papuan elapids with divergent reproductive modes: the oviparous coastal/Papuan taipan (Oxyuranus scutellatus) and the viviparous southern death adder (Acanthophis antarcticus). Analyses of nuclear SNP data excluded paternity for putative fathers and convincingly demonstrated asexual reproduction, thus representing the first evidence of facultative parthenogenesis in Elapidae. Our finding has broad implications for understanding the evolution of reproductive diversity in snakes, as well as managing the conservation of genetic diversity in wild and captive populations. PMID:29515892

Molecular evidence for the first records of facultative parthenogenesis in elapid snakes.

PubMed

Allen, L; Sanders, K L; Thomson, V A

2018-02-01

Parthenogenesis is a form of asexual reproduction by which embryos develop from unfertilized eggs. Parthenogenesis occurs in reptiles; however, it is not yet known to occur in the widespread elapid snakes (Elapidae), which include well-known taxa such as cobras, mambas, taipans and sea snakes. Here, we describe the production of viable parthenogens in two species of Australo-Papuan elapids with divergent reproductive modes: the oviparous coastal/Papuan taipan ( Oxyuranus scutellatus ) and the viviparous southern death adder ( Acanthophis antarcticus ). Analyses of nuclear SNP data excluded paternity for putative fathers and convincingly demonstrated asexual reproduction, thus representing the first evidence of facultative parthenogenesis in Elapidae. Our finding has broad implications for understanding the evolution of reproductive diversity in snakes, as well as managing the conservation of genetic diversity in wild and captive populations.

The mathematics of a quantum Hamiltonian computing half adder Boolean logic gate.

PubMed

Dridi, G; Julien, R; Hliwa, M; Joachim, C

2015-08-28

The mathematics behind the quantum Hamiltonian computing (QHC) approach of designing Boolean logic gates with a quantum system are given. Using the quantum eigenvalue repulsion effect, the QHC AND, NAND, OR, NOR, XOR, and NXOR Hamiltonian Boolean matrices are constructed. This is applied to the construction of a QHC half adder Hamiltonian matrix requiring only six quantum states to fullfil a half Boolean logical truth table. The QHC design rules open a nano-architectronic way of constructing Boolean logic gates inside a single molecule or atom by atom at the surface of a passivated semi-conductor.

Low-latency optical parallel adder based on a binary decision diagram with wavelength division multiplexing scheme

NASA Astrophysics Data System (ADS)

Shinya, A.; Ishihara, T.; Inoue, K.; Nozaki, K.; Kita, S.; Notomi, M.

2018-02-01

We propose an optical parallel adder based on a binary decision diagram that can calculate simply by propagating light through electrically controlled optical pass gates. The CARRY and CARRY operations are multiplexed in one circuit by a wavelength division multiplexing scheme to reduce the number of optical elements, and only a single gate constitutes the critical path for one digit calculation. The processing time reaches picoseconds per digit when we use a 100-μm-long optical path gates, which is ten times faster than a CMOS circuit.

An ambusher's arsenal: chemical crypsis in the puff adder (Bitis arietans)

PubMed Central

Miller, Ashadee Kay; Maritz, Bryan; McKay, Shannon; Glaudas, Xavier; Alexander, Graham J.

2015-01-01

Ambush foragers use a hunting strategy that places them at risk of predation by both visual and olfaction-oriented predators. Resulting selective pressures have driven the evolution of impressive visual crypsis in many ambushing species, and may have led to the development of chemical crypsis. However, unlike for visual crypsis, few studies have attempted to demonstrate chemical crypsis. Field observations of puff adders (Bitis arietans) going undetected by several scent-orientated predator and prey species led us to investigate chemical crypsis in this ambushing species. We trained dogs (Canis familiaris) and meerkats (Suricata suricatta) to test whether a canid and a herpestid predator could detect B. arietans using olfaction. We also tested for chemical crypsis in five species of active foraging snakes, predicted to be easily detectable. Dogs and meerkats unambiguously indicated active foraging species, but failed to correctly indicate puff adder, confirming that B. arietans employs chemical crypsis. This is the first demonstration of chemical crypsis anti-predatory behaviour, though the phenomenon may be widespread among ambushers, especially those that experience high mortality rates owing to predation. Our study provides additional evidence for the existence of an ongoing chemically mediated arms race between predator and prey species. PMID:26674950

Observation of reflected waves on the SABRE positive polarity inductive adder MITL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cuneo, M.E.; Poukey, J.W.; Mendel, C.W.

We are studying the coupling of extraction applied-B ion diodes to Magnetically Insulated Transmission Line (MITLs) on the SABRE (Sandia Accelerator and Beam Research Experiment, 6 MV, 300 kA) positive polarity inductive voltage adder. Our goal is to determine conditions under which efficient coupling occurs. The best total power efficiency for an ideal ion diode load (i.e., without parasitic losses) is obtained by maximizing the product of cathode current and gap voltage. MITLs require that the load impedance be undermatched to the self-limited line operating impedance for efficient transfer of power to ion diodes, independent of transit time isolation, andmore » even in the case of multiple cathode system with significant vacuum electron flow. We observe that this undermatched condition results in a reflected wave which decreases the line voltage and gap electron sheath current, and increases the anode and cathode current in a time-dependent way. The MITL diode coupling is determined by the flow impedance at the adder exit. We also show that the flow impedance increases along the extension MITL on SABRE. Experimental measurements of current and peak voltage are compared to analytical models and TWOQUICK 2.5-D PIC code simulations.« less

An ambusher's arsenal: chemical crypsis in the puff adder (Bitis arietans).

PubMed

Miller, Ashadee Kay; Maritz, Bryan; McKay, Shannon; Glaudas, Xavier; Alexander, Graham J

2015-12-22

Ambush foragers use a hunting strategy that places them at risk of predation by both visual and olfaction-oriented predators. Resulting selective pressures have driven the evolution of impressive visual crypsis in many ambushing species, and may have led to the development of chemical crypsis. However, unlike for visual crypsis, few studies have attempted to demonstrate chemical crypsis. Field observations of puff adders (Bitis arietans) going undetected by several scent-orientated predator and prey species led us to investigate chemical crypsis in this ambushing species. We trained dogs (Canis familiaris) and meerkats (Suricata suricatta) to test whether a canid and a herpestid predator could detect B. arietans using olfaction. We also tested for chemical crypsis in five species of active foraging snakes, predicted to be easily detectable. Dogs and meerkats unambiguously indicated active foraging species, but failed to correctly indicate puff adder, confirming that B. arietans employs chemical crypsis. This is the first demonstration of chemical crypsis anti-predatory behaviour, though the phenomenon may be widespread among ambushers, especially those that experience high mortality rates owing to predation. Our study provides additional evidence for the existence of an ongoing chemically mediated arms race between predator and prey species. © 2015 The Author(s).

Dynamic SVL and body bias for low leakage power and high performance in CMOS digital circuits

NASA Astrophysics Data System (ADS)

Deshmukh, Jyoti; Khare, Kavita

2012-12-01

In this article, a new complementary metal oxide semiconductor design scheme called dynamic self-controllable voltage level (DSVL) is proposed. In the proposed scheme, leakage power is controlled by dynamically disconnecting supply to inactive blocks and adjusting body bias to further limit leakage and to maintain performance. Leakage power measurements at 1.8 V, 75°C demonstrate power reduction by 59.4% in case of 1 bit full adder and by 43.0% in case of a chain of four inverters using SVL circuit as a power switch. Furthermore, we achieve leakage power reduction by 94.7% in case of 1 bit full adder and by 91.8% in case of a chain of four inverters using dynamic body bias. The forward body bias of 0.45 V applied in active mode improves the maximum operating frequency by 16% in case of 1 bit full adder and 5.55% in case of a chain of inverters. Analysis shows that additional benefits of using the DSVL and body bias include high performance, low leakage power consumption in sleep mode, single threshold implementation and state retention even in standby mode.

Hydraulic logic gates: building a digital water computer

NASA Astrophysics Data System (ADS)

Taberlet, Nicolas; Marsal, Quentin; Ferrand, Jérémy; Plihon, Nicolas

2018-03-01

In this article, we propose an easy-to-build hydraulic machine which serves as a digital binary computer. We first explain how an elementary adder can be built from test tubes and pipes (a cup filled with water representing a 1, and empty cup a 0). Using a siphon and a slow drain, the proposed setup combines AND and XOR logical gates in a single device which can add two binary digits. We then show how these elementary units can be combined to construct a full 4-bit adder. The sequencing of the computation is discussed and a water clock can be incorporated so that the machine can run without any exterior intervention.

Fundamental energy limits of SET-based Brownian NAND and half-adder circuits. Preliminary findings from a physical-information-theoretic methodology

NASA Astrophysics Data System (ADS)

Ercan, İlke; Suyabatmaz, Enes

2018-06-01

The saturation in the efficiency and performance scaling of conventional electronic technologies brings about the development of novel computational paradigms. Brownian circuits are among the promising alternatives that can exploit fluctuations to increase the efficiency of information processing in nanocomputing. A Brownian cellular automaton, where signals propagate randomly and are driven by local transition rules, can be made computationally universal by embedding arbitrary asynchronous circuits on it. One of the potential realizations of such circuits is via single electron tunneling (SET) devices since SET technology enable simulation of noise and fluctuations in a fashion similar to Brownian search. In this paper, we perform a physical-information-theoretic analysis on the efficiency limitations in a Brownian NAND and half-adder circuits implemented using SET technology. The method we employed here establishes a solid ground that enables studying computational and physical features of this emerging technology on an equal footing, and yield fundamental lower bounds that provide valuable insights into how far its efficiency can be improved in principle. In order to provide a basis for comparison, we also analyze a NAND gate and half-adder circuit implemented in complementary metal oxide semiconductor technology to show how the fundamental bound of the Brownian circuit compares against a conventional paradigm.

A hardware implementation of the discrete Pascal transform for image processing

NASA Astrophysics Data System (ADS)

Goodman, Thomas J.; Aburdene, Maurice F.

2006-02-01

The discrete Pascal transform is a polynomial transform with applications in pattern recognition, digital filtering, and digital image processing. It already has been shown that the Pascal transform matrix can be decomposed into a product of binary matrices. Such a factorization leads to a fast and efficient hardware implementation without the use of multipliers, which consume large amounts of hardware. We recently developed a field-programmable gate array (FPGA) implementation to compute the Pascal transform. Our goal was to demonstrate the computational efficiency of the transform while keeping hardware requirements at a minimum. Images are uploaded into memory from a remote computer prior to processing, and the transform coefficients can be offloaded from the FPGA board for analysis. Design techniques like as-soon-as-possible scheduling and adder sharing allowed us to develop a fast and efficient system. An eight-point, one-dimensional transform completes in 13 clock cycles and requires only four adders. An 8x8 two-dimensional transform completes in 240 cycles and requires only a top-level controller in addition to the one-dimensional transform hardware. Finally, through minor modifications to the controller, the transform operations can be pipelined to achieve 100% utilization of the four adders, allowing one eight-point transform to complete every seven clock cycles.

Mycobacteria Modify Their Cell Size Control under Sub-Optimal Carbon Sources

PubMed Central

Priestman, Miles; Thomas, Philipp; Robertson, Brian D.; Shahrezaei, Vahid

2017-01-01

The decision to divide is the most important one that any cell must make. Recent single cell studies suggest that most bacteria follow an “adder” model of cell size control, incorporating a fixed amount of cell wall material before dividing. Mycobacteria, including the causative agent of tuberculosis Mycobacterium tuberculosis, are known to divide asymmetrically resulting in heterogeneity in growth rate, doubling time, and other growth characteristics in daughter cells. The interplay between asymmetric cell division and adder size control has not been extensively investigated. Moreover, the impact of changes in the environment on growth rate and cell size control have not been addressed for mycobacteria. Here, we utilize time-lapse microscopy coupled with microfluidics to track live Mycobacterium smegmatis cells as they grow and divide over multiple generations, under a variety of growth conditions. We demonstrate that, under optimal conditions, M. smegmatis cells robustly follow the adder principle, with constant added length per generation independent of birth size, growth rate, and inherited pole age. However, the nature of the carbon source induces deviations from the adder model in a manner that is dependent on pole age. Understanding how mycobacteria maintain cell size homoeostasis may provide crucial targets for the development of drugs for the treatment of tuberculosis, which remains a leading cause of global mortality. PMID:28748182

Postglacial recolonization in a cold climate specialist in western Europe: patterns of genetic diversity in the adder (Vipera berus) support the central-marginal hypothesis.

PubMed

Ursenbacher, Sylvain; Guillon, Michaël; Cubizolle, Hervé; Dupoué, Andréaz; Blouin-Demers, Gabriel; Lourdais, Olivier

2015-07-01

Understanding the impact of postglacial recolonization on genetic diversity is essential in explaining current patterns of genetic variation. The central-marginal hypothesis (CMH) predicts a reduction in genetic diversity from the core of the distribution to peripheral populations, as well as reduced connectivity between peripheral populations. While the CMH has received considerable empirical support, its broad applicability is still debated and alternative hypotheses predict different spatial patterns of genetic diversity. Using microsatellite markers, we analysed the genetic diversity of the adder (Vipera berus) in western Europe to reconstruct postglacial recolonization. Approximate Bayesian Computation (ABC) analyses suggested a postglacial recolonization from two routes: a western route from the Atlantic Coast up to Belgium and a central route from the Massif Central to the Alps. This cold-adapted species likely used two isolated glacial refugia in southern France, in permafrost-free areas during the last glacial maximum. Adder populations further from putative glacial refugia had lower genetic diversity and reduced connectivity; therefore, our results support the predictions of the CMH. Our study also illustrates the utility of highly variable nuclear markers, such as microsatellites, and ABC to test competing recolonization hypotheses. © 2015 John Wiley & Sons Ltd.

Further clinical evidence for the existence of neurotoxicity in a population of the European adder (Vipera berus berus) in eastern Hungary: second authenticated case.

PubMed

Malina, Tamás; Babocsay, Gergely; Krecsák, László; Erdész, Csaba

2013-12-01

We report a recent case of common adder (Vipera berus) envenoming causing paralytic signs and symptoms. A 12-year-old girl was bitten by the nominate subspecies of the common adder (V. berus berus) in eastern Hungary on May 2, 2012, 22 km away from where the first neurotoxic V. berus berus envenoming was reported in 2008. The patient developed unambiguous cranial nerve disturbances, manifested in bilateral impairment characterized by oculomotor paralysis with partial ptosis, gaze paresis, and diplopia. Drowsiness and photophobia were her additional symptoms; both occurred only during the first day of envenoming. Until now among viper envenomings in Europe, photophobia has only been documented by victims of Vipera aspis. Supportive and symptomatic treatments were administered during 3 days of hospitalization. Although case reports of V. berus berus envenomings are often published, clinical experience with neurotoxicity by this subspecies still remains rare. Population-based and geographic variation of venom composition in V. berus berus seems to include neurotoxic envenomings in certain populations. This second authenticated case provides new clinical evidence for the existence of a possible neurotoxic V. berus berus population in a restricted geographical area in eastern Hungary. Wilderness Medical Society.

Analysis of Noise Mechanisms in Cell-Size Control.

PubMed

Modi, Saurabh; Vargas-Garcia, Cesar Augusto; Ghusinga, Khem Raj; Singh, Abhyudai

2017-06-06

At the single-cell level, noise arises from multiple sources, such as inherent stochasticity of biomolecular processes, random partitioning of resources at division, and fluctuations in cellular growth rates. How these diverse noise mechanisms combine to drive variations in cell size within an isoclonal population is not well understood. Here, we investigate the contributions of different noise sources in well-known paradigms of cell-size control, such as adder (division occurs after adding a fixed size from birth), sizer (division occurs after reaching a size threshold), and timer (division occurs after a fixed time from birth). Analysis reveals that variation in cell size is most sensitive to errors in partitioning of volume among daughter cells, and not surprisingly, this process is well regulated among microbes. Moreover, depending on the dominant noise mechanism, different size-control strategies (or a combination of them) provide efficient buffering of size variations. We further explore mixer models of size control, where a timer phase precedes/follows an adder, as has been proposed in Caulobacter crescentus. Although mixing a timer and an adder can sometimes attenuate size variations, it invariably leads to higher-order moments growing unboundedly over time. This results in a power-law distribution for the cell size, with an exponent that depends inversely on the noise in the timer phase. Consistent with theory, we find evidence of power-law statistics in the tail of C. crescentus cell-size distribution, although there is a discrepancy between the observed power-law exponent and that predicted from the noise parameters. The discrepancy, however, is removed after data reveal that the size added by individual newborns in the adder phase itself exhibits power-law statistics. Taken together, this study provides key insights into the role of noise mechanisms in size homeostasis, and suggests an inextricable link between timer-based models of size control and heavy-tailed cell-size distributions. Copyright © 2017 Biophysical Society. Published by Elsevier Inc. All rights reserved.

Venomous snakebites.

PubMed

Adukauskienė, Dalia; Varanauskienė, Eglė; Adukauskaitė, Agnė

2011-01-01

More than 5 million people are bitten by venomous snakes annually and more than 100,000 of them die. In Europe, one person dies due to envenomation every 3 years. There is only one venomous snake species in Lithuania--the common adder (Vipera berus)--which belongs to the Viperidae family; however, there are some exotic poisonous snakes in the zoos and private collections, such as those belonging to the Elapidae family (cobras, mambas, coral snakes, etc.) and the Crotalidae subfamily of the Viperidae family (pit vipers, such as rattlesnakes). Snake venom can be classified into hemotoxic, neurotoxic, necrotoxic, cardiotoxic, and nephrotoxic according to the different predominant effects depending on the family (i.e., venom of Crotalidae and Viperidae snakes is more hemotoxic and necrotoxic, whereas venom of Elapidae family is mainly neurotoxic). The intoxication degree is estimated according to the appearance of these symptoms: 1) no intoxication ("dry" bite); 2) mild intoxication (local edema and pain); 3) moderate intoxication (pain, edema spreading out of the bite zone, and systemic signs); 4) severe intoxication (shock, severe coagulopathy, and massive edemas). This topic is relevant because people tend to make major mistakes providing first aid (e.g., mouth suction, wound incision, and application of ice or heat). Therefore, this article presents the essential tips on how first aid should be performed properly according to the "Guidelines for the Management of Snake-Bites" by the World Health Organization (2010). Firstly, the victim should be reassured. Rings or other things must be removed preventing constriction of the swelling limb. Airway/breathing must be maintained. The bitten limb should be immobilized and kept below heart level to prevent venom absorption and systemic spread. Usage of pressure bandage is controversial since people usually apply it improperly. Incision, mouth suction, or excision should not be performed; neither a tourniquet nor ice or heat should be applied. A doctor must monitor respiratory rate, blood pressure, heart rate, renal function, fluid balance, and coagulation status. The only specific treatment method is antivenin--serum with antibodies against antigens of snake venom. Antivenins against pit vipers used in the United States are Antivenin Crotalidae Polyvalent (ACP) and a more purified and hence causing less adverse reactions--Crotalidae Polyvalent Immune Fab (CroFab). In Europe, a polyvalent antiserum against Viperidae family snakes (including the common adder) can be used. Antivenins often may cause severe hypersensitivity reactions because of their protein nature. The bite of the common adder (the only poisonous snake in such countries as Lithuania and Great Britain) relatively rarely results in death; thus, considering the risk of dangerous reactions the antivenin causes itself, the usage of it is recommended to be limited only to life-threatening conditions.

Low-power, high-speed 1-bit inexact Full Adder cell designs applicable to low-energy image processing

NASA Astrophysics Data System (ADS)

Zareei, Zahra; Navi, Keivan; Keshavarziyan, Peiman

2018-03-01

In this paper, three novel low-power and high-speed 1-bit inexact Full Adder cell designs are presented based on current mode logic in 32 nm carbon nanotube field effect transistor technology for the first time. The circuit-level figures of merits, i.e. power, delay and power-delay product as well as application-level metric such as error distance, are considered to assess the efficiency of the proposed cells over their counterparts. The effect of voltage scaling and temperature variation on the proposed cells is studied using HSPICE tool. Moreover, using MATLAB tool, the peak signal to noise ratio of the proposed cells is evaluated in an image-processing application referred to as motion detector. Simulation results confirm the efficiency of the proposed cells.

Pencil-like mm-size electron beams produced with linear inductive voltage adders

NASA Astrophysics Data System (ADS)

Mazarakis, M. G.; Poukey, J. W.; Rovang, D. C.; Maenchen, J. E.; Cordova, S. R.; Menge, P. R.; Pepping, R.; Bennett, L.; Mikkelson, K.; Smith, D. L.; Halbleib, J.; Stygar, W. A.; Welch, D. R.

1997-02-01

We present the design, analysis, and results of the high brightness electron beam experiments currently under investigation at Sandia National Laboratories. The anticipated beam parameters are the following: energy 12 MeV, current 35-40 kA, rms radius 0.5 mm, and pulse duration 40 ns full width at half-maximum. The accelerator is SABRE, a pulsed linear inductive voltage adder modified to higher impedance, and the electron source is a magnetically immersed foilless electron diode. 20-30 T solenoidal magnets are required to insulate the diode and contain the beam to its extremely small-sized (1 mm) envelope. These experiments are designed to push the technology to produce the highest possible electron current in a submillimeter radius beam. Design, numerical simulations, and experimental results are presented.

Different Amounts of DNA in Newborn Cells of Escherichia coli Preclude a Role for the Chromosome in Size Control According to the "Adder" Model.

PubMed

Huls, Peter G; Vischer, Norbert O E; Woldringh, Conrad L

2018-01-01

According to the recently-revived adder model for cell size control, newborn cells of Escherichia coli will grow and divide after having added a constant size or length, ΔL , irrespective of their size at birth. Assuming exponential elongation, this implies that large newborns will divide earlier than small ones. The molecular basis for the constant size increment is still unknown. As DNA replication and cell growth are coordinated, the constant ΔL could be based on duplication of an equal amount of DNA, ΔG , present in newborn cells. To test this idea, we measured amounts of DNA and lengths of nucleoids in DAPI-stained cells growing in batch culture at slow and fast rates. Deeply-constricted cells were divided in two subpopulations of longer and shorter lengths than average; these were considered to represent large and small prospective daughter cells, respectively. While at slow growth, large and small prospective daughter cells contained similar amounts of DNA, fast growing cells with multiforked replicating chromosomes, showed a significantly higher amount of DNA (20%) in the larger cells. This observation precludes the hypothesis that Δ L is based on the synthesis of a constant ΔG . Growth curves were constructed for siblings generated by asymmetric division and growing according to the adder model. Under the assumption that all cells at the same growth rate exhibit the same time between initiation of DNA replication and cell division (i.e., constant C+D -period), the constructions predict that initiation occurs at different sizes ( Li ) and that, at fast growth, large newborn cells transiently contain more DNA than small newborns, in accordance with the observations. Because the state of segregation, measured as the distance between separated nucleoids, was found to be more advanced in larger deeply-constricted cells, we propose that in larger newborns nucleoid separation occurs faster and at a shorter length, allowing them to divide earlier. We propose a composite model in which both differential initiation and segregation leads to an adder-like behavior of large and small newborn cells.

A Path to Discovery

ERIC Educational Resources Information Center

Stegemoller, William; Stegemoller, Rebecca

2004-01-01

The path taken and the turns made as a turtle traces a polygon are examined to discover an important theorem in geometry. A unique tool, the Angle Adder, is implemented in the investigation. (Contains 9 figures.)

Amplitude Control of Solid-State Modulators for Precision Fast Kicker Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Watson, J A; Anaya, R M; Caporaso, G C

2002-11-15

A solid-state modulator with very fast rise and fall times, pulse width agility, and multi-pulse burst and intra-pulse amplitude adjustment capability for use with high speed electron beam kickers has been designed and tested at LLNL. The modulator uses multiple solid-state modules stacked in an inductive-adder configuration. Amplitude adjustment is provided by controlling individual modules in the adder, and is used to compensate for transverse e-beam motion as well as the dynamic response and beam-induced steering effects associated with the kicker structure. A control algorithm calculates a voltage based on measured e-beam displacement and adjusts the modulator to regulate beammore » centroid position. This paper presents design details of amplitude control along with measured performance data from kicker operation on the ETA-II accelerator at LLNL.« less

Design and Testing of a Fast, 50 kV Solid-State Kicker Pulser

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cook, E G; Hickman, B C; Lee, B S

2002-06-24

The ability to extract particle beam bunches from a ring accelerator in arbitrary order can greatly extend an accelerator's capabilities and applications. A prototype solid-state kicker pulser capable of generating asynchronous bursts of 50 kV pulses has been designed and tested into a 50{Omega} load. The pulser features fast rise and fall times and is capable of generating an arbitrary pattern of pulses with a maximum burst frequency exceeding 5 MHz If required, the pulse-width of each pulse in the burst is independently adjustable. This kicker modulator uses multiple solid-state modules stacked in an inductive-adder configuration where the energy ismore » switched into each section of the adder by a parallel array of MOSFETs. Test data, capabilities, and limitations of the prototype pulser are described.« less

Low power adder based auditory filter architecture.

PubMed

Rahiman, P F Khaleelur; Jayanthi, V S

2014-01-01

Cochlea devices are powered up with the help of batteries and they should possess long working life to avoid replacing of devices at regular interval of years. Hence the devices with low power consumptions are required. In cochlea devices there are numerous filters, each responsible for frequency variant signals, which helps in identifying speech signals of different audible range. In this paper, multiplierless lookup table (LUT) based auditory filter is implemented. Power aware adder architectures are utilized to add the output samples of the LUT, available at every clock cycle. The design is developed and modeled using Verilog HDL, simulated using Mentor Graphics Model-Sim Simulator, and synthesized using Synopsys Design Compiler tool. The design was mapped to TSMC 65 nm technological node. The standard ASIC design methodology has been adapted to carry out the power analysis. The proposed FIR filter architecture has reduced the leakage power by 15% and increased its performance by 2.76%.

System for adjusting frequency of electrical output pulses derived from an oscillator

DOEpatents

Bartholomew, David B.

2006-11-14

A system for setting and adjusting a frequency of electrical output pulses derived from an oscillator in a network is disclosed. The system comprises an accumulator module configured to receive pulses from an oscillator and to output an accumulated value. An adjustor module is configured to store an adjustor value used to correct local oscillator drift. A digital adder adds values from the accumulator module to values stored in the adjustor module and outputs their sums to the accumulator module, where they are stored. The digital adder also outputs an electrical pulse to a logic module. The logic module is in electrical communication with the adjustor module and the network. The logic module may change the value stored in the adjustor module to compensate for local oscillator drift or change the frequency of output pulses. The logic module may also keep time and calculate drift.

Encoding Schemes For A Digital Optical Multiplier Using The Modified Signed-Digit Number Representation

NASA Astrophysics Data System (ADS)

Lasher, Mark E.; Henderson, Thomas B.; Drake, Barry L.; Bocker, Richard P.

1986-09-01

The modified signed-digit (MSD) number representation offers full parallel, carry-free addition. A MSD adder has been described by the authors. This paper describes how the adder can be used in a tree structure to implement an optical multiply algorithm. Three different optical schemes, involving position, polarization, and intensity encoding, are proposed for realizing the trinary logic system. When configured in the generic multiplier architecture, these schemes yield the combinatorial logic necessary to carry out the multiplication algorithm. The optical systems are essentially three dimensional arrangements composed of modular units. Of course, this modularity is important for design considerations, while the parallelism and noninterfering communication channels of optical systems are important from the standpoint of reduced complexity. The authors have also designed electronic hardware to demonstrate and model the combinatorial logic required to carry out the algorithm. The electronic and proposed optical systems will be compared in terms of complexity and speed.

EUVL mask dual pods to be used for mask shipping and handling in exposure tools

NASA Astrophysics Data System (ADS)

Gomei, Yoshio; Ota, Kazuya; Lystad, John; Halbmair, Dave; He, Long

2007-03-01

The concept of Extreme Ultra-Violet Lithography (EUVL) mask dual pods is proposed for use in both mask shipping and handling in exposure tools. The inner pod was specially designed to protect masks from particle contamination during shipping from mask houses to wafer factories. It can be installed in a load-lock chamber of exposure tools and evacuated while holding the mask inside. The inner pod upper cover is removed just before the mask is installed to a mask stage. Prototypes were manufactured and tested for shipping and for vacuum cycling. We counted particle adders through these actions with a detectable level of 54 nm and up. The adder count was close to zero, or we can say that the obtained result is within the noise level of our present evaluation environment. This indicates that the present concept is highly feasible for EUVL mask shipping and handling in exposure tools.

The Adder Phenomenon Emerges from Independent Control of Pre- and Post-Start Phases of the Budding Yeast Cell Cycle.

PubMed

Chandler-Brown, Devon; Schmoller, Kurt M; Winetraub, Yonatan; Skotheim, Jan M

2017-09-25

Although it has long been clear that cells actively regulate their size, the molecular mechanisms underlying this regulation have remained poorly understood. In budding yeast, cell size primarily modulates the duration of the cell-division cycle by controlling the G1/S transition known as Start. We have recently shown that the rate of progression through Start increases with cell size, because cell growth dilutes the cell-cycle inhibitor Whi5 in G1. Recent phenomenological studies in yeast and bacteria have shown that these cells add an approximately constant volume during each complete cell cycle, independent of their size at birth. These results seem to be in conflict, as the phenomenological studies suggest that cells measure the amount they grow, rather than their size, and that size control acts over the whole cell cycle, rather than specifically in G1. Here, we propose an integrated model that unifies the adder phenomenology with the molecular mechanism of G1/S cell-size control. We use single-cell microscopy to parameterize a full cell-cycle model based on independent control of pre- and post-Start cell-cycle periods. We find that our model predicts the size-independent amount of cell growth during the full cell cycle. This suggests that the adder phenomenon is an emergent property of the independent regulation of pre- and post-Start cell-cycle periods rather than the consequence of an underlying molecular mechanism measuring a fixed amount of growth. Copyright © 2017 Elsevier Ltd. All rights reserved.

Characteristics of a large vacuum wave precursor on the SABRE voltage adder MITL and extraction ion diode

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cuneo, M.E.; Hanson, D.L.; Menge, P.R.

SABRE (Sandia Accelerator and Beam Research Experiment) is a ten-cavity linear induction magnetically insulated voltage adder (6 MV, 300 kA) operated in positive polarity to investigate issues relevant to ion beam production and propagation for inertial confinement fusion. The voltage adder section is coupled to an applied-B extraction ion diode via a long coaxial output transmission line. Observations indicate that the power propagates in a vacuum wave prior to electron emission. After the electron emission threshold is reached, power propagates in a magnetically insulated wave. The precursor is observed to have a dominant impact on he turn-on, impedance history, andmore » beam characteristics of applied-B ion diodes since the precursor voltage is large enough to cause electron emission at the diode from both the cathode feed and cathode tips. The amplitude of the precursor at the load (3--4.5 MV) is a significant fraction of the maximum load voltage (5--6 MV) because (1) the transmission line gaps ( {approx} 9 cm at output) and therefore impedances are relatively large, and hence the electric field threshold for electron emission (200 to 300 kV/cm) is not reached until well into the power pulse rise time; and (2) the rapidly falling forward wave and diode impedance reduces the ratio of main pulse voltage to precursor voltage. Experimental voltage and current data from the transmission line and the ion diode will be presented and compared with TWOQUICK (2-D electromagnetic PIC code) simulations and analytic models.« less

Energy-Efficient Wide Datapath Integer Arithmetic Logic Units Using Superconductor Logic

NASA Astrophysics Data System (ADS)

Ayala, Christopher Lawrence

Complementary Metal-Oxide-Semiconductor (CMOS) technology is currently the most widely used integrated circuit technology today. As CMOS approaches the physical limitations of scaling, it is unclear whether or not it can provide long-term support for niche areas such as high-performance computing and telecommunication infrastructure, particularly with the emergence of cloud computing. Alternatively, superconductor technologies based on Josephson junction (JJ) switching elements such as Rapid Single Flux Quantum (RSFQ) logic and especially its new variant, Energy-Efficient Rapid Single Flux Quantum (ERSFQ) logic have the capability to provide an ultra-high-speed, low power platform for digital systems. The objective of this research is to design and evaluate energy-efficient, high-speed 32-bit integer Arithmetic Logic Units (ALUs) implemented using RSFQ and ERSFQ logic as the first steps towards achieving practical Very-Large-Scale-Integration (VLSI) complexity in digital superconductor electronics. First, a tunable VHDL superconductor cell library is created to provide a mechanism to conduct design exploration and evaluation of superconductor digital circuits from the perspectives of functionality, complexity, performance, and energy-efficiency. Second, hybrid wave-pipelining techniques developed earlier for wide datapath RSFQ designs have been used for efficient arithmetic and logic circuit implementations. To develop the core foundation of the ALU, the ripple-carry adder and the Kogge-Stone parallel prefix carry look-ahead adder are studied as representative candidates on opposite ends of the design spectrum. By combining the high-performance features of the Kogge-Stone structure and the low complexity of the ripple-carry adder, a 32-bit asynchronous wave-pipelined hybrid sparse-tree ALU has been designed and evaluated using the VHDL cell library tuned to HYPRES' gate-level characteristics. The designs and techniques from this research have been implemented using RSFQ logic and prototype chips have been fabricated. As a joint work with HYPRES, a 20 GHz 8-bit Kogge-Stone ALU consisting of 7,950 JJs total has been fabricated using a 1.5 μm 4.5 kA/cm2 process and fully demonstrated. An 8-bit sparse-tree ALU (8,832 JJs total) and a 16-bit sparse-tree adder (12,785 JJs total) have also been fabricated using a 1.0 μm 10 kA/cm 2 process and demonstrated under collaboration with Yokohama National University and Nagoya University (Japan).

Snake poisoning in rural Zimbabwe--a prospective study.

PubMed

Nhachi, C F; Kasilo, O M

1994-01-01

Over a period of 2 years (January 1991 to December 1992) 274 cases of snake bite were admitted to hospital in the eight provinces of Zimbabwe. Of these patients, 54% were males and 88% belonged to the 6-40-year age group. Five deaths (1.8% of the total cases) were reported. The majority of snake bites (63%) occurred at night (between 6.30 p.m. and midnight) and over 74% took place during the hot rainy season, i.e. between November and April. In over 58% of the cases the victim accidentally stepped on the snake, the snake being cobra in 37%, puff adder in 20% and the black and green mamba in 18% of the cases. Most of the bites occurred on the leg, below the knee. Treatment of snake envenomation consisted mainly of the administration of antibiotics (151 cases), analgesics (144 cases), antivenom tropical snake polyvalent (ATT) (89 cases), antitoxoid tetanus (TT) (61 cases), antihistamines (47 cases) and traditional medicines (43 cases). This study indicates that snake envenomation in rural Zimbabwe is common but fatalities are relatively rare.

Individual variability of venom from the European adder (Vipera berus berus) from one locality in Eastern Hungary.

PubMed

Malina, Tamás; Krecsák, László; Westerström, Alexander; Szemán-Nagy, Gábor; Gyémánt, Gyöngyi; M-Hamvas, Márta; Rowan, Edward G; Harvey, Alan L; Warrell, David A; Pál, Balázs; Rusznák, Zoltán; Vasas, Gábor

2017-09-01

We have revealed intra-population variability among venom samples from several individual European adders (Vipera berus berus) within a defined population in Eastern Hungary. Individual differences in venom pattern were noticed, both gender-specific and age-related, by one-dimensional electrophoresis. Gelatin zymography demonstrated that these individual venoms have different degradation profiles indicating varying protease activity in the specimens from adders of different ages and genders. Some specimens shared a conserved region of substrate degradation, while others had lower or extremely low protease activity. Phospholipase A 2 activity of venoms was similar but not identical. Interspecimen diversity of the venom phospholipase A 2 -spectra (based on the components' molecular masses) was detected by MALDI-TOF MS. The lethal toxicity of venoms (LD 50 ) also showed differences among individual snakes. Extracted venom samples had varying neuromuscular paralysing effect on chick biventer cervicis nerve-muscle preparations. The paralysing effect of venom was lost when calcium in the physiological salt solution was replaced by strontium; indicating that the block of twitch responses to nerve stimulation is associated with the activity of a phospholipase-dependent neurotoxin. In contrast to the studied V. b. berus venoms from different geographical regions so far, this is the first V. b. berus population discovered to have predominantly neurotoxic neuromuscular activity. The relevance of varying venom yields is also discussed. This study demonstrates that individual venom variation among V. b. berus living in particular area of Eastern Hungary might contribute to a wider range of clinical manifestations of V. b. berus envenoming than elsewhere in Europe. Copyright © 2017 Elsevier Ltd. All rights reserved.

Probing and exploiting the chaotic dynamics of a hydrodynamic photochemical oscillator to implement all the basic binary logic functions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hayashi, Kenta; Department of Chemistry, Biology, and Biotechnology, University of Perugia, 06123 Perugia; Gotoda, Hiroshi

2016-05-15

The convective motions within a solution of a photochromic spiro-oxazine being irradiated by UV only on the bottom part of its volume, give rise to aperiodic spectrophotometric dynamics. In this paper, we study three nonlinear properties of the aperiodic time series: permutation entropy, short-term predictability and long-term unpredictability, and degree distribution of the visibility graph networks. After ascertaining the extracted chaotic features, we show how the aperiodic time series can be exploited to implement all the fundamental two-inputs binary logic functions (AND, OR, NAND, NOR, XOR, and XNOR) and some basic arithmetic operations (half-adder, full-adder, half-subtractor). This is possible duemore » to the wide range of states a nonlinear system accesses in the course of its evolution. Therefore, the solution of the convective photochemical oscillator results in hardware for chaos-computing alternative to conventional complementary metal-oxide semiconductor-based integrated circuits.« less

Computational investigation and experimental considerations for the classical implementation of a full adder on SO2 by optical pump-probe schemes.

PubMed

Bomble, L; Lavorel, B; Remacle, F; Desouter-Lecomte, M

2008-05-21

Following the scheme recently proposed by Remacle and Levine [Phys. Rev. A 73, 033820 (2006)], we investigate the concrete implementation of a classical full adder on two electronic states (X 1A1 and C 1B2) of the SO2 molecule by optical pump-probe laser pulses using intuitive and counterintuitive (stimulated Raman adiabatic passage) excitation schemes. The resources needed for providing the inputs and reading out are discussed, as well as the conditions for achieving robustness in both the intuitive and counterintuitive pump-dump sequences. The fidelity of the scheme is analyzed with respect to experimental noise and two kinds of perturbations: The coupling to the neighboring rovibrational states and a finite rotational temperature that leads to a mixture for the initial state. It is shown that the logic processing of a full addition cycle can be realistically experimentally implemented on a picosecond time scale while the readout takes a few nanoseconds.

Hardware Implementation of 32-Bit High-Speed Direct Digital Frequency Synthesizer

PubMed Central

Ibrahim, Salah Hasan; Ali, Sawal Hamid Md.; Islam, Md. Shabiul

2014-01-01

The design and implementation of a high-speed direct digital frequency synthesizer are presented. A modified Brent-Kung parallel adder is combined with pipelining technique to improve the speed of the system. A gated clock technique is proposed to reduce the number of registers in the phase accumulator design. The quarter wave symmetry technique is used to store only one quarter of the sine wave. The ROM lookup table (LUT) is partitioned into three 4-bit sub-ROMs based on angular decomposition technique and trigonometric identity. Exploiting the advantages of sine-cosine symmetrical attributes together with XOR logic gates, one sub-ROM block can be removed from the design. These techniques, compressed the ROM into 368 bits. The ROM compressed ratio is 534.2 : 1, with only two adders, two multipliers, and XOR-gates with high frequency resolution of 0.029 Hz. These techniques make the direct digital frequency synthesizer an attractive candidate for wireless communication applications. PMID:24991635

Non-linear dynamic compensation system

NASA Technical Reports Server (NTRS)

Lin, Yu-Hwan (Inventor); Lurie, Boris J. (Inventor)

1992-01-01

A non-linear dynamic compensation subsystem is added in the feedback loop of a high precision optical mirror positioning control system to smoothly alter the control system response bandwidth from a relatively wide response bandwidth optimized for speed of control system response to a bandwidth sufficiently narrow to reduce position errors resulting from the quantization noise inherent in the inductosyn used to measure mirror position. The non-linear dynamic compensation system includes a limiter for limiting the error signal within preselected limits, a compensator for modifying the limiter output to achieve the reduced bandwidth response, and an adder for combining the modified error signal with the difference between the limited and unlimited error signals. The adder output is applied to control system motor so that the system response is optimized for accuracy when the error signal is within the preselected limits, optimized for speed of response when the error signal is substantially beyond the preselected limits and smoothly varied therebetween as the error signal approaches the preselected limits.

DENA: A Configurable Microarchitecture and Design Flow for Biomedical DNA-Based Logic Design.

PubMed

Beiki, Zohre; Jahanian, Ali

2017-10-01

DNA is known as the building block for storing the life codes and transferring the genetic features through the generations. However, it is found that DNA strands can be used for a new type of computation that opens fascinating horizons in computational medicine. Significant contributions are addressed on design of DNA-based logic gates for medical and computational applications but there are serious challenges for designing the medium and large-scale DNA circuits. In this paper, a new microarchitecture and corresponding design flow is proposed to facilitate the design of multistage large-scale DNA logic systems. Feasibility and efficiency of the proposed microarchitecture are evaluated by implementing a full adder and, then, its cascadability is determined by implementing a multistage 8-bit adder. Simulation results show the highlight features of the proposed design style and microarchitecture in terms of the scalability, implementation cost, and signal integrity of the DNA-based logic system compared to the traditional approaches.

Design of an Inductive Adder for the FCC injection kicker pulse generator

NASA Astrophysics Data System (ADS)

Woog, D.; Barnes, M. J.; Ducimetière, L.; Holma, J.; Kramer, T.

2017-07-01

The injection system for a 100 TeV centre-of-mass collider is an important part of the Future Circular Collider (FCC) study. Due to issues with conventional kicker systems, such as self-triggering and long term availability of thyratrons and limitations of HV-cables, innovative design changes are planned for the FCC injection kicker pulse generator. An inductive adder (IA) based on semiconductor (SC) switches is a promising technology for kicker systems. Its modular design, and the possibility of an active ripple suppression are significant advantages. Since the IA is a complex device, with multiple components whose characteristics are important, a detailed design study and construction of a prototype is necessary. This paper summarizes the system requirements and constraints, and describes the main components and design challenges of the prototype IA. It outlines the results from simulations and measurements on different magnetic core materials as well as on SC switches. The paper concludes on the design choices and progress for the prototype to be built at CERN.

Pneumatic binary encoder replaces multiple solenoid system

NASA Technical Reports Server (NTRS)

1966-01-01

Pneumatic binary encoder replaces solenoid system in the pilot stage of a digital actuator. The encoder operates in flip-flop manner to valve gas at either high or low pressures. By rotating the disk in a pinion-to-encoding gear ratio, six to eight adder circuits may be operated from single encoder.

Bit-Serial Adder Based on Quantum Dots

NASA Technical Reports Server (NTRS)

Fijany, Amir; Toomarian, Nikzad; Modarress, Katayoon; Spotnitz, Mathew

2003-01-01

A proposed integrated circuit based on quantum-dot cellular automata (QCA) would function as a bit-serial adder. This circuit would serve as a prototype building block for demonstrating the feasibility of quantum-dots computing and for the further development of increasingly complex and increasingly capable quantum-dots computing circuits. QCA-based bit-serial adders would be especially useful in that they would enable the development of highly parallel and systolic processors for implementing fast Fourier, cosine, Hartley, and wavelet transforms. The proposed circuit would complement the QCA-based circuits described in "Implementing Permutation Matrices by Use of Quantum Dots" (NPO-20801), NASA Tech Briefs, Vol. 25, No. 10 (October 2001), page 42 and "Compact Interconnection Networks Based on Quantum Dots" (NPO-20855), which appears elsewhere in this issue. Those articles described the limitations of very-large-scale-integrated (VLSI) circuitry and the major potential advantage afforded by QCA. To recapitulate: In a VLSI circuit, signal paths that are required not to interact with each other must not cross in the same plane. In contrast, for reasons too complex to describe in the limited space available for this article, suitably designed and operated QCA-based signal paths that are required not to interact with each other can nevertheless be allowed to cross each other in the same plane without adverse effect. In principle, this characteristic could be exploited to design compact, coplanar, simple (relative to VLSI) QCA-based networks to implement complex, advanced interconnection schemes. To enable a meaningful description of the proposed bit-serial adder, it is necessary to further recapitulate the description of a quantum-dot cellular automation from the first-mentioned prior article: A quantum-dot cellular automaton contains four quantum dots positioned at the corners of a square cell. The cell contains two extra mobile electrons that can tunnel (in the quantum-mechanical sense) between neighboring dots within the cell. The Coulomb repulsion between the two electrons tends to make them occupy antipodal dots in the cell. For an isolated cell, there are two energetically equivalent arrangements (denoted polarization states) of the extra electrons. The cell polarization is used to encode binary information. Because the polarization of a nonisolated cell depends on Coulomb-repulsion interactions with neighboring cells, universal logic gates and binary wires could be constructed, in principle, by arraying QCA of suitable design in suitable patterns. Again, for reasons too complex to describe here, in order to ensure accuracy and timeliness of the output of a QCA array, it is necessary to resort to an adiabatic switching scheme in which the QCA array is divided into subarrays, each controlled by a different phase of a multiphase clock signal. In this scheme, each subarray is given time to perform its computation, then its state is frozen by raising its inter-dot potential barriers and its output is fed as the input to the successor subarray. The successor subarray is kept in an unpolarized state so it does not influence the calculation of preceding subarray. Such a clocking scheme is consistent with pipeline computation in the sense that each different subarray can perform a different part of an overall computation. In other words, QCA arrays are inherently suitable for pipeline and, moreover, systolic computations. This sequential or pipeline aspect of QCA would be utilized in the proposed bit-serial adders.

Resembling a viper: implications of mimicry for conservation of the endangered smooth snake.

PubMed

Valkonen, Janne K; Mappes, Johanna

2014-12-01

The phenomenon of Batesian mimicry, where a palatable animal gains protection against predation by resembling an unpalatable model, has been a core interest of evolutionary biologists for 150 years. An extensive range of studies has focused on revealing mechanistic aspects of mimicry (shared education and generalization of predators) and the evolutionary dynamics of mimicry systems (co-operation vs. conflict) and revealed that protective mimicry is widespread and is important for individual fitness. However, according to our knowledge, there are no case studies where mimicry theories have been applied to conservation of mimetic species. Theoretically, mimicry affects, for example, frequency dependency of predator avoidance learning and human induced mortality. We examined the case of the protected, endangered, nonvenomous smooth snake (Coronella austriaca) that mimics the nonprotected venomous adder (Vipera berus), both of which occur in the Åland archipelago, Finland. To quantify the added predation risk on smooth snakes caused by the rarity of vipers, we calculated risk estimates from experimental data. Resemblance of vipers enhances survival of smooth snakes against bird predation because many predators avoid touching venomous vipers. Mimetic resemblance is however disadvantageous against human predators, who kill venomous vipers and accidentally kill endangered, protected smooth snakes. We found that the effective population size of the adders in Åland is very low relative to its smooth snake mimic (28.93 and 41.35, respectively).Because Batesian mimicry is advantageous for the mimic only if model species exist in sufficiently high numbers, it is likely that the conservation program for smooth snakes will fail if adders continue to be destroyed. Understanding the population consequences of mimetic species may be crucial to the success of endangered species conservation. We suggest that when a Batesian mimic requires protection, conservation planners should not ignore the model species (or co-mimic in Mullerian mimicry rings) even if it is not itself endangered. © 2014 Society for Conservation Biology.

Architecture Framework for Trapped-Ion Quantum Computer based on Performance Simulation Tool

NASA Astrophysics Data System (ADS)

Ahsan, Muhammad

The challenge of building scalable quantum computer lies in striking appropriate balance between designing a reliable system architecture from large number of faulty computational resources and improving the physical quality of system components. The detailed investigation of performance variation with physics of the components and the system architecture requires adequate performance simulation tool. In this thesis we demonstrate a software tool capable of (1) mapping and scheduling the quantum circuit on a realistic quantum hardware architecture with physical resource constraints, (2) evaluating the performance metrics such as the execution time and the success probability of the algorithm execution, and (3) analyzing the constituents of these metrics and visualizing resource utilization to identify system components which crucially define the overall performance. Using this versatile tool, we explore vast design space for modular quantum computer architecture based on trapped ions. We find that while success probability is uniformly determined by the fidelity of physical quantum operation, the execution time is a function of system resources invested at various layers of design hierarchy. At physical level, the number of lasers performing quantum gates, impact the latency of the fault-tolerant circuit blocks execution. When these blocks are used to construct meaningful arithmetic circuit such as quantum adders, the number of ancilla qubits for complicated non-clifford gates and entanglement resources to establish long-distance communication channels, become major performance limiting factors. Next, in order to factorize large integers, these adders are assembled into modular exponentiation circuit comprising bulk of Shor's algorithm. At this stage, the overall scaling of resource-constraint performance with the size of problem, describes the effectiveness of chosen design. By matching the resource investment with the pace of advancement in hardware technology, we find optimal designs for different types of quantum adders. Conclusively, we show that 2,048-bit Shor's algorithm can be reliably executed within the resource budget of 1.5 million qubits.

Design of a Sixteen Bit Pipelined Adder Using CMOS Bulk P-Well Technology.

DTIC Science & Technology

1984-12-01

node’s current value. These rules are based on the assumption that the event that was last calculated reflects the latest configuraticn of the network...Lines beginning with - are treated as ll comment. The parameter names and their default values are: ;configuration file for ’standard’ MPC procem capm .2a

Iterative color-multiplexed, electro-optical processor.

PubMed

Psaltis, D; Casasent, D; Carlotto, M

1979-11-01

A noncoherent optical vector-matrix multiplier using a linear LED source array and a linear P-I-N photodiode detector array has been combined with a 1-D adder in a feedback loop. The resultant iterative optical processor and its use in solving simultaneous linear equations are described. Operation on complex data is provided by a novel color-multiplexing system.

Design of the Detector II: A CMOS Gate Array for the Study of Concurrent Error Detection Techniques.

DTIC Science & Technology

1987-07-01

detection schemes and temporary failures. The circuit consists- or of six different adders with concurrent error detection schemes . The error detection... schemes are - simple duplication, duplication with functional dual implementation, duplication with different &I [] .6implementations, two-rail encoding...THE SYSTEM. .. .... ...... ...... ...... 5 7. DESIGN OF CED SCHEMES .. ... ...... ...... ........ 7 7.1 Simple Duplication

ASIC implementation of recursive scaled discrete cosine transform algorithm

NASA Astrophysics Data System (ADS)

On, Bill N.; Narasimhan, Sam; Huang, Victor K.

1994-05-01

A program to implement the Recursive Scaled Discrete Cosine Transform (DCT) algorithm as proposed by H. S. Hou has been undertaken at the Institute of Microelectronics. Implementation of the design was done using top-down design methodology with VHDL (VHSIC Hardware Description Language) for chip modeling. When the VHDL simulation has been satisfactorily completed, the design is synthesized into gates using a synthesis tool. The architecture of the design consists of two processing units together with a memory module for data storage and transpose. Each processing unit is composed of four pipelined stages which allow the internal clock to run at one-eighth (1/8) the speed of the pixel clock. Each stage operates on eight pixels in parallel. As the data flows through each stage, there are various adders and multipliers to transform them into the desired coefficients. The Scaled IDCT was implemented in a similar fashion with the adders and multipliers rearranged to perform the inverse DCT algorithm. The chip has been verified using Field Programmable Gate Array devices. The design is operational. The combination of fewer multiplications required and pipelined architecture give Hou's Recursive Scaled DCT good potential of achieving high performance at a low cost in using Very Large Scale Integration implementation.

Application of magnetically insulated transmission lines for high current, high voltage electron beam accelerators

NASA Astrophysics Data System (ADS)

Shope, S. L.; Mazarakis, M. G.; Frost, C. A.; Poukey, J. W.; Turman, B. N.

Self Magnetically Insulated Transmission Lines (MITL) adders were used successfully in a number of Sandia accelerators such as HELIA, HERMES III, and SABRE. Most recently we used at MITL adder in the RADLAC/SMILE electron beam accelerator to produce high quality, small radius (r(sub rho) less than 2 cm), 11 - 15 MeV, 50 - 100-kA beams with a small transverse velocity v(perpendicular)/c = beta(perpendicular) less than or equal to 0.1. In RADLAC/SMILE, a coaxial MITL passed through the eight, 2 MV vacuum envelopes. The MITL summed the voltages of all eight feeds to a single foilless diode. The experimental results are in good agreement with code simulations. Our success with the MITL technology led us to investigate the application to higher energy accelerator designs. We have a conceptual design for a cavity-fed MITL that sums the voltages from 100 identical, inductively-isolated cavities. Each cavity is a toroidal structure that is driven simultaneously by four 8-ohm pulse-forming lines, providing a 1-MV voltage pulse to each of the 100 cavities. The point design accelerator is 100 MV, 500 kA, with a 30 - 50 ns FWHM output pulse.

Detector for flow abnormalities in gaseous diffusion plant compressors

DOEpatents

Smith, Stephen F.; Castleberry, Kim N.

1998-01-01

A detector detects a flow abnormality in a plant compressor which outputs a motor current signal. The detector includes a demodulator/lowpass filter demodulating and filtering the motor current signal producing a demodulated signal, and first, second, third and fourth bandpass filters connected to the demodulator/lowpass filter, and filtering the demodulated signal in accordance with first, second, third and fourth bandpass frequencies generating first, second, third and fourth filtered signals having first, second, third and fourth amplitudes. The detector also includes first, second, third and fourth amplitude detectors connected to the first, second, third and fourth bandpass filters respectively, and detecting the first, second, third and fourth amplitudes, and first and second adders connected to the first and fourth amplitude detectors and the second and third amplitude detectors respectively, and adding the first and fourth amplitudes and the second and third amplitudes respectively generating first and second added signals. Finally, the detector includes a comparator, connected to the first and second adders, and comparing the first and second added signals and detecting the abnormal condition in the plant compressor when the second added signal exceeds the first added signal by a predetermined value.

Detector for flow abnormalities in gaseous diffusion plant compressors

DOEpatents

Smith, S.F.; Castleberry, K.N.

1998-06-16

A detector detects a flow abnormality in a plant compressor which outputs a motor current signal. The detector includes a demodulator/lowpass filter demodulating and filtering the motor current signal producing a demodulated signal, and first, second, third and fourth bandpass filters connected to the demodulator/lowpass filter, and filtering the demodulated signal in accordance with first, second, third and fourth bandpass frequencies generating first, second, third and fourth filtered signals having first, second, third and fourth amplitudes. The detector also includes first, second, third and fourth amplitude detectors connected to the first, second, third and fourth bandpass filters respectively, and detecting the first, second, third and fourth amplitudes, and first and second adders connected to the first and fourth amplitude detectors and the second and third amplitude detectors respectively, and adding the first and fourth amplitudes and the second and third amplitudes respectively generating first and second added signals. Finally, the detector includes a comparator, connected to the first and second adders, and comparing the first and second added signals and detecting the abnormal condition in the plant compressor when the second added signal exceeds the first added signal by a predetermined value. 6 figs.

Dual Brushless Resolver Rate Sensor

NASA Technical Reports Server (NTRS)

Howard, David E. (Inventor)

1997-01-01

A resolver rate sensor is disclosed in which dual brushless resolvers are mechanically coupled to the same output shaft. Diverse inputs are provided to each resolver by providing the first resolver with a DC input and the second resolver with an AC sinusoidal input. A trigonometric identity in which the sum of the squares of the sin and cosine components equal one is used to advantage in providing a sensor of increased accuracy. The first resolver may have a fixed or variable DC input to permit dynamic adjustment of resolver sensitivity thus permitting a wide range of coverage. In one embodiment of the invention the outputs of the first resolver are directly inputted into two separate multipliers and the outputs of the second resolver are inputted into the two separate multipliers, after being demodulated in a pair of demodulator circuits. The multiplied signals are then added in an adder circuit to provide a directional sensitive output. In another embodiment the outputs from the first resolver is modulated in separate modulator circuits and the output from the modulator circuits are used to excite the second resolver. The outputs from the second resolver are demodulated in separate demodulator circuit and added in an adder circuit to provide a direction sensitive rate output.

Automatic oscillator frequency control system

NASA Technical Reports Server (NTRS)

Smith, S. F. (Inventor)

1985-01-01

A frequency control system makes an initial correction of the frequency of its own timing circuit after comparison against a frequency of known accuracy and then sequentially checks and corrects the frequencies of several voltage controlled local oscillator circuits. The timing circuit initiates the machine cycles of a central processing unit which applies a frequency index to an input register in a modulo-sum frequency divider stage and enables a multiplexer to clock an accumulator register in the divider stage with a cyclical signal derived from the oscillator circuit being checked. Upon expiration of the interval, the processing unit compares the remainder held as the contents of the accumulator against a stored zero error constant and applies an appropriate correction word to a correction stage to shift the frequency of the oscillator being checked. A signal from the accumulator register may be used to drive a phase plane ROM and, with periodic shifts in the applied frequency index, to provide frequency shift keying of the resultant output signal. Interposition of a phase adder between the accumulator register and phase plane ROM permits phase shift keying of the output signal by periodic variation in the value of a phase index applied to one input of the phase adder.

Experiments investigating the generation and transport of 10--12 MeV, 30-kA, mm-size electron beams with linear inductive voltage adders

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mazarakis, M.G.; Poukey, J.W.; Maenchen, J.E.

The authors present the design, analysis, and results of the high-brightness electron beam experiments currently under investigation at Sandia National Laboratories. The anticipated beam parameters are the following: 8--12 MeV, 35--50 kA, 30--60 ns FWHM, and 0.5-mm rms beam radius. The accelerators utilized are SABRE and HERMES III. Both are linear inductive voltage adders modified to higher impedance and fitted with magnetically immersed foil less electron diodes. In the strong 20--50 Tesla solenoidal magnetic field of the diode, mm-size electron beams are generated and propagated to a beam stop. The electron beam is field emitted from mm-diameter needle-shaped cathode electrodemore » and is contained in a similar size envelop by the strong magnetic field. These extremely space charge dominated beams provide the opportunity to study beam dynamics and possible instabilities in a unique parameter space. The SABRE experiments are already completed and have produced 30-kA, 1.5-mm FWHM electron beams, while the HERMES-III experiments are on-going.« less

Promiscuity in sand lizards (Lacerta agilis) and adder snakes (Vipera berus): causes and consequences.

PubMed

Olsson, M; Madsen, T

2001-01-01

We review postcopulatory phenomena in the Swedish sand lizard (Lacerta agilis) and adder (Vipera berus), and in particular, links between female promiscuity, determinants of paternity, and offspring viability. In both species, females mate multiply and exhibit a positive relationship between the number of partners and offspring viability. We conclude that this relationship is most likely the result of variable genetic compatibility between mates arising from postcopulatory phenomena, predominantly assortative fertilization with respect to parental genotypes. However, males who were more successful at mate acquisition were also more successful in situations of sperm competition, suggesting a possible link between male (diploid and haploid) genetic quality per se and probability of fertilization. Neither the number of partners nor the number of matings influenced the risk of infertility in sand lizards, suggesting that selection for reduced risk of infertility is not a sufficient explanation for maintaining female promiscuity in this population. Finally, we conclude that the relatively low genetic variability exhibited by our study populations may have facilitated detection of genetic benefits compared to more outbred ones. However, recent work derived from outbred populations in other taxa suggest a greater generality of the principles we discuss than previously may have been appreciated.

The ecological impact of invasive cane toads on tropical snakes: field data do not support laboratory-based predictions.

PubMed

Brown, Gregory P; Phillips, Benjamin L; Shine, Richard

2011-02-01

Predicting which species will be affected by an invasive taxon is critical to developing conservation priorities, but this is a difficult task. A previous study on the impact of invasive cane toads (Bufo marinus) on Australian snakes attempted to predict vulnerability a priori based on the assumptions that any snake species that eats frogs, and is vulnerable to toad toxins, may be at risk from the toad invasion. We used time-series analyses to evaluate the accuracy of that prediction, based on >3600 standardized nocturnal surveys over a 138-month period on 12 species of snakes and lizards on a floodplain in the Australian wet-dry tropics, bracketing the arrival of cane toads at this site. Contrary to prediction, encounter rates with most species were unaffected by toad arrival, and some taxa predicted to be vulnerable to toads increased rather than declined (e.g., death adder Acanthophis praelongus; Children's python Antaresia childreni). Indirect positive effects of toad invasion (perhaps mediated by toad-induced mortality of predatory varanid lizards) and stochastic weather events outweighed effects of toad invasion for most snake species. Our study casts doubt on the ability of a priori desktop studies, or short-term field surveys, to predict or document the ecological impact of invasive species.

Ka-Band Wide-Bandgap Solid-State Power Amplifier: Prototype Combiner Spurious Mode Suppression and Power Constraints

NASA Technical Reports Server (NTRS)

Khan, P.; Epp, L.

2006-01-01

Results of prototype hardware activities related to a 120-W, 32-GHz (Ka-band) solid-state power amplifier (SSPA) architecture study are presented. Spurious mode suppression and the power-handling capability of a prototype 24-way radial combiner and a prototype 2-way septum binary combiner were investigated. Experimental data indicate that a commercial absorptive filter, designed to pass the circular TE01 mode, effectively suppressed the higher-order modes generated by a narrowband, flower-petal-type mode transducer. However, the same filter was not effective in suppressing higher-order modes generated by the broadband Marie mode transducer that is used in the prototype waveguide radial combiner. Should greater filtering be required by a particular SSPA application, a broadband mode filter that can suppress specifically those higher-order modes that are generated by the Marie transducer will need to be developed. A back-to-back configuration of the prototype radial combiner was tested with drive power up to approximately 50 W. No anomalous behavior was observed. Power measurements of the septum combiner indicate that up to 10-W radio frequency (RF) can be dissipated in the integrated resistive element before a permanent performance shift is observed. Thus, a given adder (a single-stage, 2-way combiner) can safely combine two 20-W sources, and the adder will not be damaged in the event of a source failure. This result is used to calculate the maximum source power that can be safely combined as a function of the number of sources combined and the number of source failures allowed in a multi-stage combiner. The analysis shows that SSPA power >140 W can be generated by power combining 16 sources producing 10 W each. In this configuration, up to three sources could fail with the guarantee that the combiner would not be damaged. Finally, a modified prototype septum combiner design was verified. The improved design reduced the assembly time from over 2 hours to about 15 minutes per adder.

Validation of Association between Breastfeeding Duration, Facial Profile, Occlusion, and Spacing: A Cross-sectional Study

PubMed Central

Sharma, Mohit; Nehra, Karan; Jayan, Balakrishna; Poonia, Anish; Bhattal, Hiteshwar

2016-01-01

ABSTRACT Introduction: This cross-sectional retrospective study was designed to assess the relationships among breastfeeding duration, nonnutritive sucking habits, convex facial profile, nonspaced dentition, and distoclusion in the deciduous dentition. Materials and methods: A sample of 415 children (228 males, 187 females) aged 4 to 6 years from a mixed Indian population was clinically examined by two orthodontists. Information about breastfeeding duration and nonnutritive sucking habits was obtained by written questionnaire which was answered by the parents. Results: Chi-square test did not indicate any significant association among breastfeeding duration, convex facial profile, and distoclusion. Statistically significant association was observed between breastfeeding duration and nonspaced dentition and also between breastfeeding duration and nonnutritive sucking habits. Nonnutritive sucking habits had a statistically significant association with distoclusion and convex facial profile (odds ratio 7.04 and 4.03 respectively). Nonnutritive sucking habits did not have a statistically significant association with nonspaced dentition. Conclusion: The children breastfed < 6 months had almost twofold increased probability for developing sucking habits and nonspaced dentition, respectively, than the children who had breastfeeding > 6 months duration. It can also be hypothesized that nonnutritive sucking habits may act as a dominant variable in the relationship between breastfeeding duration and occurrence of convex facial profile and distoclusion in deciduous dentition. How to cite this article: Agarwal SS, Sharma M, Nehra K, Jayan B, Poonia A, Bhattal H. Validation of Association between Breastfeeding Duration, Facial Profile, Occlusion, and Spacing: A Cross-sectional Study. Int J Clin Pediatr Dent 2016;9(2):162-166. PMID:27365941

Phlebotomus Sandflies of the Paloich Area in the Sudan (Diptera, Psychodidae)

DTIC Science & Technology

1964-10-01

Hamster, Cricetus auratus Toad, Bufo regularis (?) Gecko, H. turicus Skink, M. striata Puff adder Snake, CMNH HH-9111’ Snake, CMNH HH-9112’ Hedgehog ...Pharynx unarmed distally or only with few, smail spines ; pigment patch not dark enough to obscure teeth .................. 8 Pharynx heavily...armed distally with numerous, dark spines ; pigment patch very dark, 1964 Quate: Sudanese sandflies 237 often obscuring teeth unless specimen well

A time-domain digitally controlled oscillator composed of a free running ring oscillator and flying-adder

NASA Astrophysics Data System (ADS)

Wei, Liu; Wei, Li; Peng, Ren; Qinglong, Lin; Shengdong, Zhang; Yangyuan, Wang

2009-09-01

A time-domain digitally controlled oscillator (DCO) is proposed. The DCO is composed of a free-running ring oscillator (FRO) and a two lap-selectors integrated flying-adder (FA). With a coiled cell array which allows uniform loading capacitances of the delay cells, the FRO produces 32 outputs with consistent tap spacing for the FA as reference clocks. The FA uses the outputs from the FRO to generate the output of the DCO according to the control number, resulting in a linear dependence of the output period, instead of the frequency on the digital controlling word input. Thus the proposed DCO ensures a good conversion linearity in a time-domain, and is suitable for time-domain all-digital phase locked loop applications. The DCO was implemented in a standard 0.13 μm digital logic CMOS process. The measurement results show that the DCO has a linear and monotonic tuning curve with gain variation of less than 10%, and a very low root mean square period jitter of 9.3 ps in the output clocks. The DCO works well at supply voltages ranging from 0.6 to 1.2 V, and consumes 4 mW of power with 500 MHz frequency output at 1.2 V supply voltage.

The probabilistic convolution tree: efficient exact Bayesian inference for faster LC-MS/MS protein inference.

PubMed

Serang, Oliver

2014-01-01

Exact Bayesian inference can sometimes be performed efficiently for special cases where a function has commutative and associative symmetry of its inputs (called "causal independence"). For this reason, it is desirable to exploit such symmetry on big data sets. Here we present a method to exploit a general form of this symmetry on probabilistic adder nodes by transforming those probabilistic adder nodes into a probabilistic convolution tree with which dynamic programming computes exact probabilities. A substantial speedup is demonstrated using an illustration example that can arise when identifying splice forms with bottom-up mass spectrometry-based proteomics. On this example, even state-of-the-art exact inference algorithms require a runtime more than exponential in the number of splice forms considered. By using the probabilistic convolution tree, we reduce the runtime to O(k log(k)2) and the space to O(k log(k)) where k is the number of variables joined by an additive or cardinal operator. This approach, which can also be used with junction tree inference, is applicable to graphs with arbitrary dependency on counting variables or cardinalities and can be used on diverse problems and fields like forward error correcting codes, elemental decomposition, and spectral demixing. The approach also trivially generalizes to multiple dimensions.

The Probabilistic Convolution Tree: Efficient Exact Bayesian Inference for Faster LC-MS/MS Protein Inference

PubMed Central

Serang, Oliver

2014-01-01

Exact Bayesian inference can sometimes be performed efficiently for special cases where a function has commutative and associative symmetry of its inputs (called “causal independence”). For this reason, it is desirable to exploit such symmetry on big data sets. Here we present a method to exploit a general form of this symmetry on probabilistic adder nodes by transforming those probabilistic adder nodes into a probabilistic convolution tree with which dynamic programming computes exact probabilities. A substantial speedup is demonstrated using an illustration example that can arise when identifying splice forms with bottom-up mass spectrometry-based proteomics. On this example, even state-of-the-art exact inference algorithms require a runtime more than exponential in the number of splice forms considered. By using the probabilistic convolution tree, we reduce the runtime to and the space to where is the number of variables joined by an additive or cardinal operator. This approach, which can also be used with junction tree inference, is applicable to graphs with arbitrary dependency on counting variables or cardinalities and can be used on diverse problems and fields like forward error correcting codes, elemental decomposition, and spectral demixing. The approach also trivially generalizes to multiple dimensions. PMID:24626234

The effect of CO2 regulations on the cost of corn ethanol production

NASA Astrophysics Data System (ADS)

Plevin, R. J.; Mueller, S.

2008-04-01

To explore the effect of CO2 price on the effective cost of ethanol production we have developed a model that integrates financial and emissions accounting for dry-mill corn ethanol plants. Three policy options are modeled: (1) a charge per unit of life cycle CO2 emissions, (2) a charge per unit of direct biorefinery emissions only, and (3) a low carbon fuel standard (LCFS). A CO2 charge on life cycle emissions increases production costs by between 0.005 and 0.008 l-1 per 10 Mg-1 CO2 price increment, across all modeled plant energy systems, with increases under direct emissions somewhat lower in all cases. In contrast, a LCFS increases the cost of production for selected plant energy systems only: a LCFS requiring reductions in average fuel global warming intensity (GWI) with a target of 10% below the 2005 baseline increases the production costs for coal-fired plants only. For all other plant types, the LCFS operates as a subsidy. The findings depend strongly on the magnitude of a land use change adder. Some land use change adders currently discussed in the literature will push the GWI of all modeled production systems above the LCFS target, flipping the CO2 price from a subsidy to a tax.

Linear inductive voltage adders (IVA) for advanced hydrodynamic radiography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mazarakis, M.G.; Boyes, J.D.; Johnson, D.L.

The electron beam which drifts through the multiple cavities of conventional induction linacs (LIA) is replaced in an IVA by a cylindrical metal conductor which extends along the entire length of the device and effectuates the addition of the accelerator cavity voltages. In the approach to radiography, the linear inductive voltage adder drives a magnetically immersed electron diode with a millimeter diameter cathode electrode and a planar anode/bremsstrahlung converter. Both anode and cathode electrodes are immersed in a strong (15--50 T) solenoidal magnetic field. The electron beam cross section is approximately of the same size as the cathode needle andmore » generates a similar size, very intense x-ray beam when it strikes the anode converter. An IVA driven diode can produce electron beams of equal size and energy as a LIA but with much higher currents (40--50 kA versus 4--5 kA), simpler hardware and thus lower cost. The authors present here first experimental validations of the technology utilizing HERMES 3 and SABRE IVA accelerators. The electron beam voltage and current were respectively of the order of 10 MV and 40 kA. X-ray doses of up to 1 kR {at} 1 m and spot sizes as small as 1.7 mm (at 200 R doses) were measured.« less

Experiments Investigating the Generation and Transport of 10--12 MeV, 30-kA, mm-size Electron Beams with Linear Inductive Voltage Adders.

NASA Astrophysics Data System (ADS)

Mazarakis, M. G.; Poukey, J. W.; Maenchen, J. E.; Rovang, D. C.; Menge, P. R.; Lash, J. S.; Smith, D. L.; Halbleib, J. A.; Cordova, S. R.; Mikkelson, K.; Gustwiller, J.; Stygar, W. A.; Welch, D. R.; Smith, I.; Corcoran, P.

1997-05-01

We present the design, analysis, and results of the high-brightness electron beam experiments currently under investigation at Sandia National Laboratories. The anticipated beam parameters are the following: energy 8-12 MeV, current 35-50 kA, rms radius 0.5 mm, and pulse duration 30-60 ns FWHM. The accelerators utilized are SABRE and Hermes-III. Both are linear inductive voltage adders (IVA) modified to higher impedance and fitted with magnetically immersed foilless electron diodes. In the strong 20-50 Tesla solenoidal magnetic field of the diode, mm-size electron beams are generated and propagated to a beam stop. The electron beam is field emitted from mm-diameter needle-shaped cathode electrode and is contained in a similar size envelope by the strong magnetic field. These extremely space charge dominated beams provide the opportunity to study beam dynamics and possible instabilities in a unique parameter space. The SABRE experiments are already completed and have produced 30 kA, 1.5-2.5 FWHM electron beams, while the Hermes-III experiments are currently under way. Results and analysis of the SABRE experimentation and a progress report on Hermes-III experiments will be presented.

Demonstration of optical computing logics based on binary decision diagram.

PubMed

Lin, Shiyun; Ishikawa, Yasuhiko; Wada, Kazumi

2012-01-16

Optical circuits are low power consumption and fast speed alternatives for the current information processing based on transistor circuits. However, because of no transistor function available in optics, the architecture for optical computing should be chosen that optics prefers. One of which is Binary Decision Diagram (BDD), where signal is processed by sending an optical signal from the root through a serial of switching nodes to the leaf (terminal). Speed of optical computing is limited by either transmission time of optical signals from the root to the leaf or switching time of a node. We have designed and experimentally demonstrated 1-bit and 2-bit adders based on the BDD architecture. The switching nodes are silicon ring resonators with a modulation depth of 10 dB and the states are changed by the plasma dispersion effect. The quality, Q of the rings designed is 1500, which allows fast transmission of signal, e.g., 1.3 ps calculated by a photon escaping time. A total processing time is thus analyzed to be ~9 ps for a 2-bit adder and would scales linearly with the number of bit. It is two orders of magnitude faster than the conventional CMOS circuitry, ~ns scale of delay. The presented results show the potential of fast speed optical computing circuits.

Complementary code and digital filtering for detection of weak VHF radar signals from the mesoscale. [SOUSY-VHF radar, Harz Mountains, Germany

NASA Technical Reports Server (NTRS)

Schmidt, G.; Ruster, R.; Czechowsky, P.

1983-01-01

The SOUSY-VHF-Radar operates at a frequency of 53.5 MHz in a valley in the Harz mountains, Germany, 90 km from Hanover. The radar controller, which is programmed by a 16-bit computer holds 1024 program steps in core and controls, via 8 channels, the whole radar system: in particular the master oscillator, the transmitter, the transmit-receive-switch, the receiver, the analog to digital converter, and the hardware adder. The high-sensitivity receiver has a dynamic range of 70 dB and a video bandwidth of 1 MHz. Phase coding schemes are applied, in particular for investigations at mesospheric heights, in order to carry out measurements with the maximum duty cycle and the maximum height resolution. The computer takes the data from the adder to store it in magnetic tape or disc. The radar controller is programmed by the computer using simple FORTRAN IV statements. After the program has been loaded and the computer has started the radar controller, it runs automatically, stopping at the program end. In case of errors or failures occurring during the radar operation, the radar controller is shut off caused either by a safety circuit or by a power failure circuit or by a parity check system.

Design of Arithmetic Circuits for Complex Binary Number System

NASA Astrophysics Data System (ADS)

Jamil, Tariq

2011-08-01

Complex numbers play important role in various engineering applications. To represent these numbers efficiently for storage and manipulation, a (-1+j)-base complex binary number system (CBNS) has been proposed in the literature. In this paper, designs of nibble-size arithmetic circuits (adder, subtractor, multiplier, divider) have been presented. These circuits can be incorporated within von Neumann and associative dataflow processors to achieve higher performance in both sequential and parallel computing paradigms.

Numeric Function Generators Using Decision Diagrams for Discrete Functions

DTIC Science & Technology

2009-05-01

Taylor series and Chebyshev series. Since polynomial functions can be realized with multipliers and adders, any numeric functions can be realized in...NFGs from the decision diagrams. Since nu- meric functions can be expanded into polynomial functions, such as a Taylor series, in this section, we use...pp. 107–114, July 1995. [13] T. Kam, T. Villa, R. K. Brayton , and A. L. Sangiovanni- Vincentelli, “Multi-valued decision diagrams: Theory and appli

Deterministic Execution of Ptides Programs

DTIC Science & Technology

2013-05-15

at a time no later than 30+1+5 = 36. Assume the maximum clock synchronization error is . Therefore, the AddSubtract adder must delay processing the...the synchronization of the platform real- time clock to its peers in other system platforms. The portions of PtidyOS code that implement access to the...interesting opportunities for future research. References [1] Y. Zhao, E. A. Lee, and J. Liu, “A programming model for time - synchronized distributed real

Assembly of Ultra-Dense Nanowire-Based Computing Systems

DTIC Science & Technology

2006-06-30

34* characterized basic device element properties and statistics "* demonstrated product of sums (POS) validating assembled 2-bit adder structures " Demonstrated...linear region (Vds= 10 mV) from the peak g = 3 jiS at IVg -VTI= 0.13 V using the charge control model, representsmore than a factor of 10 improvement over...disrupted by ionizing particles or thermal fluctuation. Further, when working with such small charges, it is statistically possible that logic

Formal Verification of Digital Logic

DTIC Science & Technology

1991-12-01

INVERT circuit was based upon VHDL code provided in the Zycad Reference Manual [32:Ch 10,73]. The other circuits were based upon VHtDL code written...HALFADD.PL /* This file implements a simple half-adder that * /* is built from inverters and 2 input nand gates. * /* It is based upon a Zycad VHDL file...It is based upon a Zycad VHDL file written by * /* Capt Dave Banton, which is attached below the * /* Prolog code . *load..in(primitive). %h get nor2

DUMPING COOLED MOLDS FROM THE SHAKE OUT RAILS ONTO A ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

DUMPING COOLED MOLDS FROM THE SHAKE OUT RAILS ONTO A VIBRATING CONVEYOR WHICH TRANSPORTS CASTINGS AND SAND TO A SEPARATION SCREEN WHICH SIFTS SAND ONTO BELT CONVEYORS BELOW THAT CARRY IT PAST SWITCH-ACTIVATED WATER INJECTORS TO SIMILAR SWITCH-ACTIVATED FRESH SAND ADDERS BEFORE TRANSPORTING IT TO THE SAND STORAGE BIN WHILE CASTINGS ARE EITHER MANUALLY OR SMALL CRANE LIFTED TO DEGATING AREAS. - Southern Ductile Casting Company, Centerville Foundry, 101 Airport Road, Centreville, Bibb County, AL

Research, Development and Testing of a Fault-Tolerant FPGA-Based Sequencer for CubeSat Launching Applications

DTIC Science & Technology

2013-03-01

amounts of time and effort to implement. Future testing with commercial, fault-tolerant synthesis software, under a radiation environment, will yield ...initial viewpoint of the author is to take the flash-based FPGA route. This will yield a simple, reconfigurable circuit while providing the added...structure seen in Figure 30. Each of these full adder blocks were replaced in subsequent iterations to yield proper comparison with this baseline

Scalability of carbon-nanotube-based thin film transistors for flexible electronic devices manufactured using an all roll-to-roll gravure printing system

PubMed Central

Koo, Hyunmo; Lee, Wookyu; Choi, Younchang; Sun, Junfeng; Bak, Jina; Noh, Jinsoo; Subramanian, Vivek; Azuma, Yasuo; Majima, Yutaka; Cho, Gyoujin

2015-01-01

To demonstrate that roll-to-roll (R2R) gravure printing is a suitable advanced manufacturing method for flexible thin film transistor (TFT)-based electronic circuits, three different nanomaterial-based inks (silver nanoparticles, BaTiO3 nanoparticles and single-walled carbon nanotubes (SWNTs)) were selected and optimized to enable the realization of fully printed SWNT-based TFTs (SWNT-TFTs) on 150-m-long rolls of 0.25-m-wide poly(ethylene terephthalate) (PET). SWNT-TFTs with 5 different channel lengths, namely, 30, 80, 130, 180, and 230 μm, were fabricated using a printing speed of 8 m/min. These SWNT-TFTs were characterized, and the obtained electrical parameters were related to major mechanical factors such as web tension, registration accuracy, impression roll pressure and printing speed to determine whether these mechanical factors were the sources of the observed device-to-device variations. By utilizing the electrical parameters from the SWNT-TFTs, a Monte Carlo simulation for a 1-bit adder circuit, as a reference, was conducted to demonstrate that functional circuits with reasonable complexity can indeed be manufactured using R2R gravure printing. The simulation results suggest that circuits with complexity, similar to the full adder circuit, can be printed with a 76% circuit yield if threshold voltage (Vth) variations of less than 30% can be maintained. PMID:26411839

Back-streaming ion beam measurements in a Self Magnetic Insulated (SMP) electron diode

NASA Astrophysics Data System (ADS)

Mazarakis, Michael; Johnston, Mark; Kiefer, Mark; Leckbee, Josh; Webb, Timothy; Bennett, Nichelle; Droemer, Darryl; Welch, Dale; Nielsen, Dan; Ziska, Derek; Wilkins, Frank; Advance radiography department Team

2014-10-01

A self-magnetic pinch diode (SMP) is presently the electron diode of choice for high energy flash x-ray radiography utilizing pulsed power drivers. The Sandia National Laboratories RITS accelerator is presently fit with an SMP diode that generates very small electron beam spots. RITS is a Self-Magnetically Insulated Transmission Line (MITL) voltage adder that adds the voltage pulse of six 1.3 MV inductively insulated cavities. The diode's anode is made of high Z metal in order to produce copious and energetic flash x-rays for radiographic imaging of high areal density objects. In any high voltage inductive voltage adder (IVA) utilizing MITLs to transmit the power to the diode load, the precise knowledge of the accelerating voltage applied on the anode-cathode (A-K) gap is problematic. This is even more difficult in an SMP diode where the A-K gap is very small (~1 cm) and the diode region very hostile. We are currently measuring the back-streaming ion currents emitted from the anode and propagating through a hollow cathode tip. We then are evaluating the A-K gap voltage by ion time of flight measurements supplemented with filtered Rogowski coils. Sandia is a multiprogram laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under Contract No. DE- AC04-94AL850.

Performance Analysis of IEEE 802.11g Waveform Transmitted Over a Fading Channel with Pulse-Noise Interference

DTIC Science & Technology

2006-06-01

called packet binary convolutional code (PBCC), was included as an option for performance at rate of either 5.5 or 11 Mpbs. The second offshoot...and the code rate is r k n= . A general convolutional encoder can be implemented with k shift-registers and n modulo-2 adders. Higher rates can be...derived from lower rate codes by employing “ puncturing .” Puncturing is a procedure for omitting some of the encoded bits in the transmitter (thus

VLSI (Very Large Scale Integrated) Design of a 16 Bit Very Fast Pipelined Carry Look Ahead Adder.

DTIC Science & Technology

1983-09-01

the ability for systems engineers to custom design digital integrated circuits. Until recently, the design of integrated circuits has been...traditionally carried out by a select group of logic designers working in semiconductor laboratories. Systems engineers had to "make do" or "fit in" the...products of these labs to realize their designs. The systems engineers had little participation in the actual design of the chip. The MED and CONWAY design

Universal programmable logic gate and routing method

NASA Technical Reports Server (NTRS)

Vatan, Farrokh (Inventor); Akarvardar, Kerem (Inventor); Mojarradi, Mohammad M. (Inventor); Fijany, Amir (Inventor); Cristoloveanu, Sorin (Inventor); Kolawa, Elzbieta (Inventor); Blalock, Benjamin (Inventor); Chen, Suheng (Inventor); Toomarian, Nikzad (Inventor)

2009-01-01

An universal and programmable logic gate based on G.sup.4-FET technology is disclosed, leading to the design of more efficient logic circuits. A new full adder design based on the G.sup.4-FET is also presented. The G.sup.4-FET can also function as a unique router device offering coplanar crossing of signal paths that are isolated and perpendicular to one another. This has the potential of overcoming major limitations in VLSI design where complex interconnection schemes have become increasingly problematic.

Application of Semiconductor Devices in Computer Technique.

DTIC Science & Technology

1960-10-14

large number of circuits v&th point-contact triod.es are used in practice f’^J" - £"i? 7° Yfe shall consider below only sojae of 7 «. -X... la a number of devices, for example in adders and registersj for the control and for connection with other circuits it is necessary to pick up... la discontin tied the voltage on the collector remains the saaaes fox’ some tiae and passing through •’the has© and collector is the space

Smart molecules at work--mimicking advanced logic operations.

PubMed

Andréasson, Joakim; Pischel, Uwe

2010-01-01

Molecular logic is an interdisciplinary research field, which has captured worldwide interest. This tutorial review gives a brief introduction into molecular logic and Boolean algebra. This serves as the basis for a discussion of the state-of-the-art and future challenges in the field. Representative examples from the most recent literature including adders/subtractors, multiplexers/demultiplexers, encoders/decoders, and sequential logic devices (keypad locks) are highlighted. Other horizons, such as the utility of molecular logic in bio-related applications, are discussed as well.

Quantum dot ternary-valued full-adder: Logic synthesis by a multiobjective design optimization based on a genetic algorithm

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klymenko, M. V.; Remacle, F., E-mail: fremacle@ulg.ac.be

2014-10-28

A methodology is proposed for designing a low-energy consuming ternary-valued full adder based on a quantum dot (QD) electrostatically coupled with a single electron transistor operating as a charge sensor. The methodology is based on design optimization: the values of the physical parameters of the system required for implementing the logic operations are optimized using a multiobjective genetic algorithm. The searching space is determined by elements of the capacitance matrix describing the electrostatic couplings in the entire device. The objective functions are defined as the maximal absolute error over actual device logic outputs relative to the ideal truth tables formore » the sum and the carry-out in base 3. The logic units are implemented on the same device: a single dual-gate quantum dot and a charge sensor. Their physical parameters are optimized to compute either the sum or the carry out outputs and are compatible with current experimental capabilities. The outputs are encoded in the value of the electric current passing through the charge sensor, while the logic inputs are supplied by the voltage levels on the two gate electrodes attached to the QD. The complex logic ternary operations are directly implemented on an extremely simple device, characterized by small sizes and low-energy consumption compared to devices based on switching single-electron transistors. The design methodology is general and provides a rational approach for realizing non-switching logic operations on QD devices.« less

SABRE modification to a higher voltage high impedance inductive voltage adder (IVA)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mazarakis, M.G.; Smith, D.L.; Poukey, J.W.

The SABRE accelerator was originally designed to operate as low impedance voltage adder with 40-ohm maximum output impedance in negative polarity operation and approximately 20 ohm in positive polarity. Because of the low impedance and higher than expected energy losses in the pulse forming network, the operating input cavity voltage is of the order of 800 kV which limits the total output voltage to {approximately} 8 MV for negative polarity and 5 to 6 MV for positive polarity. The modifications presented here aim to increase the output voltage in both polarities. A new high impedance central electrode was designed capablemore » of operating both in negative and positive polarities, and the number of pulse forming lines feeding the inductively isolated cavities was reduced to half. These modifications were recently tested in positive polarity. An increase in the total accelerating voltage from 5.5 MV to 9 MV was observed while stressing all components to the level required to achieve 12 MV in negative polarity. In these experiments only 65% of the usual operating intermediate store capacitor voltage was necessary (1.7 MV instead of 2.6 MV). Currently, the device is reconfigured for negative polarity tests. The cavities are rotated by 180{degree} and a 17-inch spool is added at the base of the cantilevered center electrode (cathode electrode). Positive and negative polarity results are presented and compared with simulations.« less

Peptides from puff adder Bitis arietans venom, novel inhibitors of nicotinic acetylcholine receptors.

PubMed

Vulfius, Catherine A; Spirova, Ekaterina N; Serebryakova, Marina V; Shelukhina, Irina V; Kudryavtsev, Denis S; Kryukova, Elena V; Starkov, Vladislav G; Kopylova, Nina V; Zhmak, Maxim N; Ivanov, Igor A; Kudryashova, Ksenia S; Andreeva, Tatyana V; Tsetlin, Victor I; Utkin, Yuri N

2016-10-01

Phospholipase A 2 (named bitanarin) possessing capability to block nicotinic acetylcholine receptors (nAChRs) was isolated earlier (Vulfius et al., 2011) from puff adder Bitis arietans venom. Further studies indicated that low molecular weight fractions of puff adder venom inhibit nAChRs as well. In this paper, we report on isolation from this venom and characterization of three novel peptides called baptides 1, 2 and 3 that reversibly block nAChRs. To isolate the peptides, the venom of B. arietans was fractionated by gel-filtration and reversed phase chromatography. The amino acid sequences of peptides were established by de novo sequencing using MALDI mass spectrometry. Baptide 1 comprised 7, baptides 2 and 3-10 amino acid residues, the latter being acetylated at the N-terminus. This is the first indication for the presence of such post-translational modification in snake venom proteins. None of the peptides contain cysteine residues. For biological activity studies the peptides were prepared by solid phase peptide synthesis. Baptide 3 and 2 blocked acetylcholine-elicited currents in isolated Lymnaea stagnalis neurons with IC 50 of about 50 μM and 250 μM, respectively. In addition baptide 2 blocked acetylcholine-induced currents in muscle nAChR heterologously expressed in Xenopus oocytes with IC 50 of about 3 μM. The peptides did not compete with radioactive α-bungarotoxin for binding to Torpedo and α7 nAChRs at concentration up to 200 μM that suggests non-competitive mode of inhibition. Calcium imaging studies on α7 and muscle nAChRs heterologously expressed in mouse neuroblastoma Neuro2a cells showed that on α7 receptor baptide 2 inhibited acetylcholine-induced increasing intracellular calcium concentration with IC 50 of 20.6 ± 3.93 μM. On both α7 and muscle nAChRs the suppression of maximal response to acetylcholine by about 50% was observed at baptide 2 concentration of 25 μM, the value being close to IC 50 on α7 nAChR. These data are in accord with non-competitive inhibition as follows from α-bungarotoxin binding experiments. The described peptides are the shortest peptides without disulfide bridges isolated from animal venom and capable to inhibit nAChR by non-competitive way. Copyright © 2016. Published by Elsevier Ltd.

A Solid-State Modulator for High Speed Kickers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Watson, J A; Cook, E G; Chen, Y J

2001-06-11

An all solid-state modulator with multi-pulse burst capability, very fast rise and fall times, pulse width agility, and amplitude modulation capability for use with high-speed beam kickers has been designed and tested at LLNL. The modulator uses multiple solid-state modules stacked in an inductive-adder configuration. It provides a nominal 18kV pulse with {+-} 10% amplitude modulation on the order of several MHz, rise times on the order of 10nS, and can be configured for either positive or negative polarity. The presentation will include measured performance data.

High-Speed Rapid-Single-Flux-Quantum Multiplexer and Demultiplexer Design and Testing

DTIC Science & Technology

2007-08-22

Herr, N. Vukovic , C. A. Mancini, M. F. Bocko, and M. J . Feldman, "High speed testing of a four-bit RSFQ decimation digital filter," IEEE Trans. Appl...61] A. M. Herr, C. A. Mancini, N. Vukovic , M. F. Bocko, and M. J . Feldman, "High-speed operation of a 64-bit circular shift register," IEEE Trans...10-19 J . A rich library of basic cells such as flip-flops, buffers, adders, multipliers, clock generator circuits, and phase-locking circuits have been

Evaluation of floating-point sum or difference of products in carry-save domain

NASA Technical Reports Server (NTRS)

Wahab, A.; Erdogan, S.; Premkumar, A. B.

1992-01-01

An architecture to evaluate a 24-bit floating-point sum or difference of products using modified sequential carry-save multipliers with extensive pipelining is described. The basic building block of the architecture is a carry-save multiplier with built-in mantissa alignment for the summation during the multiplication cycles. A carry-save adder, capable of mantissa alignment, correctly positions products with the current carry-save sum. Carry propagation in individual multipliers is avoided and is only required once to produce the final result.

A Prototype Silicon Compiler in Prolog

DTIC Science & Technology

1988-12-01

A Prototype Silicon Compiler in Prolog 04 William Bush Gino Cheng Partrick C. McGeer Alvin M. Despain DTIC ELECTV JUL 281989 B Report No. UCB/CSD 88...the same register to variables in the same positions in invo- cation and head. Thus in ... g(A, B ),.. and g(X, Y) A and X share one register, and B ...example for a one-bit adder is given below. x = compl(or(and(c,or(a, b )),and(a, b ))). y = compl(or(and(x,or(a, b ,c)),and(a2b,c))). sum = compl(y). carry

Demonstration of Inexact Computing Implemented in the JPEG Compression Algorithm using Probabilistic Boolean Logic applied to CMOS Components

DTIC Science & Technology

2015-12-24

Ripple-Carry RCA Ripple-Carry Adder RF Radio Frequency RMS Root-Mean-Square SEU Single Event Upset SIPI Signal and Image Processing Institute SNR...correctness, where 0.5 < p < 1, and a probability (1−p) of error. Errors could be caused by noise, radio frequency (RF) interference, crosstalk...utilized in the Apollo Guidance Computer is the three input NOR Gate. . . At the time that the decision was made to use in- 11 tegrated circuits, the

Demonstration of Inexact Computing Implemented in the JPEG Compression Algorithm Using Probabilistic Boolean Logic Applied to CMOS Components

DTIC Science & Technology

2015-12-24

Ripple-Carry RCA Ripple-Carry Adder RF Radio Frequency RMS Root-Mean-Square SEU Single Event Upset SIPI Signal and Image Processing Institute SNR...correctness, where 0.5 < p < 1, and a probability (1−p) of error. Errors could be caused by noise, radio frequency (RF) interference, crosstalk...utilized in the Apollo Guidance Computer is the three input NOR Gate. . . At the time that the decision was made to use in- 11 tegrated circuits, the

Optical Carry Adder.

DTIC Science & Technology

1987-03-01

AOM’s) with the deflected beam as the modulator "on" state. These AOM’s ( TeO2 crystals, manufactured by Newport E.O. Systems) have high deflection...caused by the slow acoustic propagation (4.2 - 105 cm/s for TeO2 ), but this delay can be minimized by placing the laser beam close to the acoustic...dependent jitter in the optical carry to below 1 ns, the total carry path must be less than 30 cm long (or 20 cm in glass , 14 cm in LiNbO 3). Thus, a 32

Snakebite enquiries to the UK National Poisons Information Service: 2004-2010.

PubMed

Coulson, James Michael; Cooper, Gillian; Krishna, Channarayapatna; Thompson, John Paul

2013-11-01

To describe trends regarding snakebite enquiries to the UK National Poisons Information Service (NPIS) from 2004 to 2010. The NPIS telephone enquiry database, the UK Poisons Information Database, was interrogated for enquiries to the four NPIS units from 2004 to 2010. Search terms used were 'snake' and 'snakebite'. Information from the national dataset was available from Cardiff and Edinburgh units from 2004 onwards, Birmingham from June 2005 and Newcastle from September 2006. Five hundred and ten cases were identified, of which 69% were male and 31% female. Average age of cases was 32 years (±1 95% CI). The snake was identified as follows: British Adder in 52% of cases, an exotic species in 26%, unknown in 18% and another UK snake in 4%. 82% of cases occurred between the months of April and September. Cases peaked during August (19%). Forty-two per cent of enquiries involved features of envenoming. Eighty-five cases were assessed as requiring antivenom. Eighty-four cases received treatment with antivenom. No adverse reactions to the antivenom were reported and resolution of clinical features was reported in all treated cases. Advice to use an antidote was followed in 98.8% of cases. Snakebites account for one to two NPIS cases per week. Adder bites account for over half of cases. A quarter of cases were due to non-UK snakes kept in captivity within the UK. Envenoming was said to have occurred in just under half of all cases. Advice given by the NPIS appears to closely reflect national practice guidelines.

Defect reduction for semiconductor memory applications using jet and flash imprint lithography

NASA Astrophysics Data System (ADS)

Ye, Zhengmao; Luo, Kang; Irving, J. W.; Lu, Xiaoming; Zhang, Wei; Fletcher, Brian; Liu, Weijun; Xu, Frank; LaBrake, Dwayne; Resnick, Douglas; Sreenivasan, S. V.

2013-03-01

Imprint lithography has been shown to be an effective technique for replication of nano-scale features. Jet and Flash Imprint Lithography (J-FIL) involves the field-by-field deposition and exposure of a low viscosity resist deposited by jetting technology onto the substrate. The patterned mask is lowered into the fluid which then quickly flows into the relief patterns in the mask by capillary action. Following this filling step, the resist is crosslinked under UV radiation, and then the mask is removed leaving a patterned resist on the substrate. Acceptance of imprint lithography for manufacturing will require demonstration that it can attain defect levels commensurate with the defect specifications of high end memory devices. Typical defectivity targets are on the order of 0.10/cm2. In previous studies, we have focused on defects such as random non-fill defects occurring during the resist filling process and repeater defects caused by interactions with particles on the substrate. In this work, we attempted to identify the critical imprint defect types using a mask with NAND Flash-like patterns at dimensions as small as 26nm. The two key defect types identified were line break defects induced by small particulates and airborne contaminants which result in local adhesion failure. After identification, the root cause of the defect was determined, and corrective measures were taken to either eliminate or reduce the defect source. As a result, we have been able to reduce defectivity levels by more than three orders of magnitude in only 12 months and are now achieving defectivity adders as small as 2 adders per lot of wafers.

Techniques for Computing the DFT Using the Residue Fermat Number Systems and VLSI

NASA Technical Reports Server (NTRS)

Truong, T. K.; Chang, J. J.; Hsu, I. S.; Pei, D. Y.; Reed, I. S.

1985-01-01

The integer complex multiplier and adder over the direct sum of two copies of a finite field is specialized to the direct sum of the rings of integers modulo Fermat numbers. Such multiplications and additions can be used in the implementation of a discrete Fourier transform (DFT) of a sequence of complex numbers. The advantage of the present approach is that the number of multiplications needed for the DFT can be reduced substantially over the previous approach. The architectural designs using this approach are regular, simple, expandable and, therefore, naturally suitable for VLSI implementation.

Modified signed-digit trinary addition using synthetic wavelet filter

NASA Astrophysics Data System (ADS)

Iftekharuddin, K. M.; Razzaque, M. A.

2000-09-01

The modified signed-digit (MSD) number system has been a topic of interest as it allows for parallel carry-free addition of two numbers for digital optical computing. In this paper, harmonic wavelet joint transform (HWJT)-based correlation technique is introduced for optical implementation of MSD trinary adder implementation. The realization of the carry-propagation-free addition of MSD trinary numerals is demonstrated using synthetic HWJT correlator model. It is also shown that the proposed synthetic wavelet filter-based correlator shows high performance in logic processing. Simulation results are presented to validate the performance of the proposed technique.

Charge Coupled Devices in Signal Processing Systems. Volume V. Final Report.

DTIC Science & Technology

1979-12-01

the Phase III program. At that time, mutual customer /contractor interest arose in a unique application area, involving manipulation of lists of...using half adders and "or" circuits. 4-35 3 b 2 b3 01 b *3b, *2 b 1 b2b 1 0 1 b, + + + + + + ++ r T 7 7 r* 7FA +-0j FA 147 7 7 1 77 7 7 TL NO.6 NO. 5...which the cell could be step-and- repeated into an array in the CAD system. In practice we found that the attendent custom skewing delay layout

Inductive voltage adder advanced hydrodynamic radiographic technology demonstration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mazarakis, M.G.; Poukey, J.W.; Maenchen

This paper presents the design, results, and analysis of a high-brightness electron beam technology demonstration experiment completed at Sandia National Laboratories, performed in collaboration with Los Alamos National Laboratory. The anticipated electron beam parameters were: 12 MeV, 35-40 kA, 0.5-mm rms radius, and 40-ns full width half maximum (FWHM) pulse duration. This beam, on an optimum thickness tantalum converter, should produce a very intense x-ray source of {approximately} 1.5-mm spot size and 1 kR dose @ 1 m. The accelerator utilized was SABRE, a pulsed inductive voltage adder, and the electron source was a magnetically immersed foilless electron diode. Formore » these experiments, SABRE was modified to high-impedance negative-polarity operation. A new 100-ohm magnetically insulated transmission line cathode electrode was designed and constructed; the cavities were rotated 180{degrees} poloidally to invert the central electrode polarity to negative; and only one of the two pulse forming lines per cavity was energized. A twenty- to thirty-Tesla solenoidal magnet insulated the diode and contained the beam at its extremely small size. These experiments were designed to demonstrate high electron currents in submillimeter radius beams resulting in a high-brightness high-intensity flash x-ray source for high-resolution thick-object hydrodynamic radiography. The SABRE facility high-impedance performance was less than what was hoped. The modifications resulted in a lower amplitude (9 MV), narrower-than-anticipated triangular voltage pulse, which limited the dose to {approximately} 20% of the expected value. In addition, halo and ion-hose instabilities increased the electron beam spot size to > 1.5 mm. Subsequent, more detailed calculations explain these reduced output parameters. An accelerator designed (versus retrofit) for this purpose would provide the desired voltage and pulse shape.« less

A simple second-order digital phase-locked loop.

NASA Technical Reports Server (NTRS)

Tegnelia, C. R.

1972-01-01

A simple second-order digital phase-locked loop has been designed for the Viking Orbiter 1975 command system. Excluding analog-to-digital conversion, implementation of the loop requires only an adder/subtractor, two registers, and a correctable counter with control logic. The loop considers only the polarity of phase error and corrects system clocks according to a filtered sequence of this polarity. The loop is insensitive to input gain variation, and therefore offers the advantage of stable performance over long life. Predictable performance is guaranteed by extreme reliability of acquisition, yet in the steady state the loop produces only a slight degradation with respect to analog loop performance.

Off-line, built-in test techniques for VLSI circuits

NASA Technical Reports Server (NTRS)

Buehler, M. G.; Sievers, M. W.

1982-01-01

It is shown that the use of redundant on-chip circuitry improves the testability of an entire VLSI circuit. In the study described here, five techniques applied to a two-bit ripple carry adder are compared. The techniques considered are self-oscillation, self-comparison, partition, scan path, and built-in logic block observer. It is noted that both classical stuck-at faults and nonclassical faults, such as bridging faults (shorts), stuck-on x faults where x may be 0, 1, or vary between the two, and parasitic flip-flop faults occur in IC structures. To simplify the analysis of the testing techniques, however, a stuck-at fault model is assumed.

Implementation of Arithmetic and Nonarithmetic Functions on a Label-free and DNA-based Platform

NASA Astrophysics Data System (ADS)

Wang, Kun; He, Mengqi; Wang, Jin; He, Ronghuan; Wang, Jianhua

2016-10-01

A series of complex logic gates were constructed based on graphene oxide and DNA-templated silver nanoclusters to perform both arithmetic and nonarithmetic functions. For the purpose of satisfying the requirements of progressive computational complexity and cost-effectiveness, a label-free and universal platform was developed by integration of various functions, including half adder, half subtractor, multiplexer and demultiplexer. The label-free system avoided laborious modification of biomolecules. The designed DNA-based logic gates can be implemented with readout of near-infrared fluorescence, and exhibit great potential applications in the field of bioimaging as well as disease diagnosis.

Note: A pulsed laser ion source for linear induction accelerators

NASA Astrophysics Data System (ADS)

Zhang, H.; Zhang, K.; Shen, Y.; Jiang, X.; Dong, P.; Liu, Y.; Wang, Y.; Chen, D.; Pan, H.; Wang, W.; Jiang, W.; Long, J.; Xia, L.; Shi, J.; Zhang, L.; Deng, J.

2015-01-01

We have developed a high-current laser ion source for induction accelerators. A copper target was irradiated by a frequency-quadrupled Nd:YAG laser (266 nm) with relatively low intensities of 108 W/cm2. The laser-produced plasma supplied a large number of Cu+ ions (˜1012 ions/pulse) during several microseconds. Emission spectra of the plasma were observed and the calculated electron temperature was about 1 eV. An induction voltage adder extracted high-current ion beams over 0.5 A/cm2 from a plasma-prefilled gap. The normalized beam emittance measured by a pepper-pot method was smaller than 1 π mm mrad.

A Low-Complexity and High-Performance 2D Look-Up Table for LDPC Hardware Implementation

NASA Astrophysics Data System (ADS)

Chen, Jung-Chieh; Yang, Po-Hui; Lain, Jenn-Kaie; Chung, Tzu-Wen

In this paper, we propose a low-complexity, high-efficiency two-dimensional look-up table (2D LUT) for carrying out the sum-product algorithm in the decoding of low-density parity-check (LDPC) codes. Instead of employing adders for the core operation when updating check node messages, in the proposed scheme, the main term and correction factor of the core operation are successfully merged into a compact 2D LUT. Simulation results indicate that the proposed 2D LUT not only attains close-to-optimal bit error rate performance but also enjoys a low complexity advantage that is suitable for hardware implementation.

Factors affecting the output pulse flatness of the linear transformer driver cavity systems with 5th harmonics

DOE PAGES

Alexeenko, V. M.; Mazarakis, M. G.; Kim, A. A.; ...

2016-09-19

Here, we describe the study we have undertaken to evaluate the effect of component tolerances in obtaining a voltage output flat top for a linear transformer driver (LTD) cavity containing 3rd and 5th harmonic bricks [A. A. Kim et al., in Proc. IEEE Pulsed Power and Plasma Science PPPS2013 (San Francisco, California, USA, 2013), pp. 1354–1356.] and for 30 cavity voltage adder. Our goal was to define the necessary component value precision in order to obtain a voltage output flat top with no more than ±0.5% amplitude variation.

Factors affecting the output pulse flatness of the linear transformer driver cavity systems with 5th harmonics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alexeenko, V. M.; Mazarakis, M. G.; Kim, A. A.

Here, we describe the study we have undertaken to evaluate the effect of component tolerances in obtaining a voltage output flat top for a linear transformer driver (LTD) cavity containing 3rd and 5th harmonic bricks [A. A. Kim et al., in Proc. IEEE Pulsed Power and Plasma Science PPPS2013 (San Francisco, California, USA, 2013), pp. 1354–1356.] and for 30 cavity voltage adder. Our goal was to define the necessary component value precision in order to obtain a voltage output flat top with no more than ±0.5% amplitude variation.

Serial multiplier arrays for parallel computation

NASA Technical Reports Server (NTRS)

Winters, Kel

1990-01-01

Arrays of systolic serial-parallel multiplier elements are proposed as an alternative to conventional SIMD mesh serial adder arrays for applications that are multiplication intensive and require few stored operands. The design and operation of a number of multiplier and array configurations featuring locality of connection, modularity, and regularity of structure are discussed. A design methodology combining top-down and bottom-up techniques is described to facilitate development of custom high-performance CMOS multiplier element arrays as well as rapid synthesis of simulation models and semicustom prototype CMOS components. Finally, a differential version of NORA dynamic circuits requiring a single-phase uncomplemented clock signal introduced for this application.

Optical information-processing systems and architectures II; Proceedings of the Meeting, San Diego, CA, July 9-13, 1990

NASA Astrophysics Data System (ADS)

Javidi, Bahram

The present conference discusses topics in the fields of neural networks, acoustooptic signal processing, pattern recognition, phase-only processing, nonlinear signal processing, image processing, optical computing, and optical information processing. Attention is given to the optical implementation of an inner-product neural associative memory, optoelectronic associative recall via motionless-head/parallel-readout optical disk, a compact real-time acoustooptic image correlator, a multidimensional synthetic estimation filter, and a light-efficient joint transform optical correlator. Also discussed are a high-resolution spatial light modulator, compact real-time interferometric Fourier-transform processors, a fast decorrelation algorithm for permutation arrays, the optical interconnection of optical modules, and carry-free optical binary adders.

Learning to segment mouse embryo cells

NASA Astrophysics Data System (ADS)

León, Juan; Pardo, Alejandro; Arbeláez, Pablo

2017-11-01

Recent advances in microscopy enable the capture of temporal sequences during cell development stages. However, the study of such sequences is a complex task and time consuming task. In this paper we propose an automatic strategy to adders the problem of semantic and instance segmentation of mouse embryos using NYU's Mouse Embryo Tracking Database. We obtain our instance proposals as refined predictions from the generalized hough transform, using prior knowledge of the embryo's locations and their current cell stage. We use two main approaches to learn the priors: Hand crafted features and automatic learned features. Our strategy increases the baseline jaccard index from 0.12 up to 0.24 using hand crafted features and 0.28 by using automatic learned ones.

Multi-input and binary reproducible, high bandwidth floating point adder in a collective network

DOEpatents

Chen, Dong; Eisley, Noel A.; Heidelberger, Philip; Steinmacher-Burow, Burkhard

2016-11-15

To add floating point numbers in a parallel computing system, a collective logic device receives the floating point numbers from computing nodes. The collective logic devices converts the floating point numbers to integer numbers. The collective logic device adds the integer numbers and generating a summation of the integer numbers. The collective logic device converts the summation to a floating point number. The collective logic device performs the receiving, the converting the floating point numbers, the adding, the generating and the converting the summation in one pass. One pass indicates that the computing nodes send inputs only once to the collective logic device and receive outputs only once from the collective logic device.

[Bites of venomous snakes in Switzerland].

PubMed

Plate, Andreas; Kupferschmidt, Hugo; Schneemann, Markus

2016-06-08

Although snake bites are rare in Europe, there are a constant number of snake bites in Switzerland. There are two domestic venomous snakes in Switzerland: the aspic viper (Vipera aspis) and the common European adder (Vipera berus). Bites from venomous snakes are caused either by one of the two domestic venomous snakes or by an exotic venomous snake kept in a terrarium. Snake- bites can cause both a local and/or a systemic envenoming. Potentially fatal systemic complications are related to disturbances of the hemostatic- and cardiovascular system as well as the central or peripheral nervous system. Beside a symptomatic therapy the administration of antivenom is the only causal therapy to neutralize the venomous toxins.

Complex logic functions implemented with quantum dot bionanophotonic circuits.

PubMed

Claussen, Jonathan C; Hildebrandt, Niko; Susumu, Kimihiro; Ancona, Mario G; Medintz, Igor L

2014-03-26

We combine quantum dots (QDs) with long-lifetime terbium complexes (Tb), a near-IR Alexa Fluor dye (A647), and self-assembling peptides to demonstrate combinatorial and sequential bionanophotonic logic devices that function by time-gated Förster resonance energy transfer (FRET). Upon excitation, the Tb-QD-A647 FRET-complex produces time-dependent photoluminescent signatures from multi-FRET pathways enabled by the capacitor-like behavior of the Tb. The unique photoluminescent signatures are manipulated by ratiometrically varying dye/Tb inputs and collection time. Fluorescent output is converted into Boolean logic states to create complex arithmetic circuits including the half-adder/half-subtractor, 2:1 multiplexer/1:2 demultiplexer, and a 3-digit, 16-combination keypad lock.

Note: A pulsed laser ion source for linear induction accelerators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, H., E-mail: bamboobbu@hotmail.com; School of Physics, Peking University, Beijing 100871; Zhang, K.

2015-01-15

We have developed a high-current laser ion source for induction accelerators. A copper target was irradiated by a frequency-quadrupled Nd:YAG laser (266 nm) with relatively low intensities of 10{sup 8} W/cm{sup 2}. The laser-produced plasma supplied a large number of Cu{sup +} ions (∼10{sup 12} ions/pulse) during several microseconds. Emission spectra of the plasma were observed and the calculated electron temperature was about 1 eV. An induction voltage adder extracted high-current ion beams over 0.5 A/cm{sup 2} from a plasma-prefilled gap. The normalized beam emittance measured by a pepper-pot method was smaller than 1 π mm mrad.

Implementation of a pulse coupled neural network in FPGA.

PubMed

Waldemark, J; Millberg, M; Lindblad, T; Waldemark, K; Becanovic, V

2000-06-01

The Pulse Coupled neural network, PCNN, is a biologically inspired neural net and it can be used in various image analysis applications, e.g. time-critical applications in the field of image pre-processing like segmentation, filtering, etc. a VHDL implementation of the PCNN targeting FPGA was undertaken and the results presented here. The implementation contains many interesting features. By pipelining the PCNN structure a very high throughput of 55 million neuron iterations per second could be achieved. By making the coefficients re-configurable during operation, a complete recognition system could be implemented on one, or maybe two, chip(s). Reconsidering the ranges and resolutions of the constants may save a lot of hardware, since the higher resolution requires larger multipliers, adders, memories etc.

Virtual gap dielectric wall accelerator

DOEpatents

Caporaso, George James; Chen, Yu-Jiuan; Nelson, Scott; Sullivan, Jim; Hawkins, Steven A

2013-11-05

A virtual, moving accelerating gap is formed along an insulating tube in a dielectric wall accelerator (DWA) by locally controlling the conductivity of the tube. Localized voltage concentration is thus achieved by sequential activation of a variable resistive tube or stalk down the axis of an inductive voltage adder, producing a "virtual" traveling wave along the tube. The tube conductivity can be controlled at a desired location, which can be moved at a desired rate, by light illumination, or by photoconductive switches, or by other means. As a result, an impressed voltage along the tube appears predominantly over a local region, the virtual gap. By making the length of the tube large in comparison to the virtual gap length, the effective gain of the accelerator can be made very large.

Multi-input and binary reproducible, high bandwidth floating point adder in a collective network

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Dong; Eisley, Noel A; Heidelberger, Philip

To add floating point numbers in a parallel computing system, a collective logic device receives the floating point numbers from computing nodes. The collective logic devices converts the floating point numbers to integer numbers. The collective logic device adds the integer numbers and generating a summation of the integer numbers. The collective logic device converts the summation to a floating point number. The collective logic device performs the receiving, the converting the floating point numbers, the adding, the generating and the converting the summation in one pass. One pass indicates that the computing nodes send inputs only once to themore » collective logic device and receive outputs only once from the collective logic device.« less

Preliminary results of Linear Induction Accelerator LIA-200

NASA Astrophysics Data System (ADS)

Sharma, Archana; Senthil, K.; Praveen Kumar, D. D.; Mitra, S.; Sharma, V.; Patel, A.; Sharma, D. K.; Rehim, R.; Kolge, T. S.; Saroj, P. C.; Acharya, S.; Amitava, Roy; Rakhee, M.; Nagesh, K. V.; Chakravarthy, D. P.

2010-05-01

Repetitive Pulsed Power Technology is being developed keeping in mind the potential applications of this technology in material modifications, disinfections of water, timber, and food pasteurization etc. BARC has indigenously developed a Linear Induction Accelerator (LIA-200) rated for 200 kV, 4 kA, 100 ns, 10 Hz. The satisfactory performance of all the sub-systems including solid state power modulator, amorphous core based pulsed transformers, magnetic switches, water capacitors, water pulse- forming line, induction adder and field-emission diode have been demonstrated. This paper presents some design details and operational results of this pulsed power system. It also highlights the need for further research and development to build reliable and economic high-average power systems for industrial applications.

Digital high speed programmable convolver

NASA Astrophysics Data System (ADS)

Rearick, T. C.

1984-12-01

A circuit module for rapidly calculating a discrete numerical convolution is described. A convolution such as finding the sum of the products of a 16 bit constant and a 16 bit variable is performed by a module which is programmable so that the constant may be changed for a new problem. In addition, the module may be programmed to find the sum of the products of 4 and 8 bit constants and variables. RAM (Random Access Memories) are loaded with partial products of the selected constant and all possible variables. Then, when the actual variable is loaded, it acts as an address to find the correct partial product in the particular RAM. The partial products from all of the RAMs are shifted to the appropriate numerical power position (if necessary) and then added in adder elements.

A Novel Reconfigurable Logic Unit Based on the DNA-Templated Potassium-Concentration-Dependent Supramolecular Assembly.

PubMed

Yang, Chunrong; Zou, Dan; Chen, Jianchi; Zhang, Linyan; Miao, Jiarong; Huang, Dan; Du, Yuanyuan; Yang, Shu; Yang, Qianfan; Tang, Yalin

2018-03-15

Plenty of molecular circuits with specific functions have been developed; however, logic units with reconfigurability, which could simplify the circuits and speed up the information process, are rarely reported. In this work, we designed a novel reconfigurable logic unit based on a DNA-templated, potassium-concentration-dependent, supramolecular assembly, which could respond to the input stimuli of H + and K + . By inputting different concentrations of K + , the logic unit could implement three significant functions, including a half adder, a half subtractor, and a 2-to-4 decoder. Considering its reconfigurable ability and good performance, the novel prototypes developed here may serve as a promising proof of principle in molecular computers. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Evolutionary Based Techniques for Fault Tolerant Field Programmable Gate Arrays

NASA Technical Reports Server (NTRS)

Larchev, Gregory V.; Lohn, Jason D.

2006-01-01

The use of SRAM-based Field Programmable Gate Arrays (FPGAs) is becoming more and more prevalent in space applications. Commercial-grade FPGAs are potentially susceptible to permanently debilitating Single-Event Latchups (SELs). Repair methods based on Evolutionary Algorithms may be applied to FPGA circuits to enable successful fault recovery. This paper presents the experimental results of applying such methods to repair four commonly used circuits (quadrature decoder, 3-by-3-bit multiplier, 3-by-3-bit adder, 440-7 decoder) into which a number of simulated faults have been introduced. The results suggest that evolutionary repair techniques can improve the process of fault recovery when used instead of or as a supplement to Triple Modular Redundancy (TMR), which is currently the predominant method for mitigating FPGA faults.

Physical picture of immersed diode experiments on HERMES III and SABRE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olson, C.L.; Mazarakis, M.G.; Menge, P.R.

A needle-like, high-current, electron beam has been produced on the Hermes III and SABRE accelerators at SNL using inductive voltage adder (IVA) technology, and a diode consisting of a needle cathode and a planar anode/bremmstrahlung converter which are both fully immersed in a strong solenoidal magnetic field (12--50 T). Desired nominal parameters are 10 MV, 40 kA, 0.5 mm radius cathode, and 5--35 cm anode-cathode gaps. High dose and small x-ray spot size are required for radiography applications. Results are presented of initial experiments on Hermes III and SABRE, which have produced doses up to 1 kRad {at} 1 meter,more » and at lower doses, spot sizes as small as 1.7 mm diameter.« less

Concurrent error detecting codes for arithmetic processors

NASA Technical Reports Server (NTRS)

Lim, R. S.

1979-01-01

A method of concurrent error detection for arithmetic processors is described. Low-cost residue codes with check-length l and checkbase m = 2 to the l power - 1 are described for checking arithmetic operations of addition, subtraction, multiplication, division complement, shift, and rotate. Of the three number representations, the signed-magnitude representation is preferred for residue checking. Two methods of residue generation are described: the standard method of using modulo m adders and the method of using a self-testing residue tree. A simple single-bit parity-check code is described for checking the logical operations of XOR, OR, and AND, and also the arithmetic operations of complement, shift, and rotate. For checking complement, shift, and rotate, the single-bit parity-check code is simpler to implement than the residue codes.

Techniques for computing the discrete Fourier transform using the quadratic residue Fermat number systems

NASA Technical Reports Server (NTRS)

Truong, T. K.; Chang, J. J.; Hsu, I. S.; Pei, D. Y.; Reed, I. S.

1986-01-01

The complex integer multiplier and adder over the direct sum of two copies of finite field developed by Cozzens and Finkelstein (1985) is specialized to the direct sum of the rings of integers modulo Fermat numbers. Such multiplication over the rings of integers modulo Fermat numbers can be performed by means of two integer multiplications, whereas the complex integer multiplication requires three integer multiplications. Such multiplications and additions can be used in the implementation of a discrete Fourier transform (DFT) of a sequence of complex numbers. The advantage of the present approach is that the number of multiplications needed to compute a systolic array of the DFT can be reduced substantially. The architectural designs using this approach are regular, simple, expandable and, therefore, naturally suitable for VLSI implementation.

Design and Performance Investigation for the Optical Combinational Networks at High Data Rate

NASA Astrophysics Data System (ADS)

Tripathi, Devendra Kr.

2017-05-01

This article explores performance study for optical combinational designs based on nonlinear characteristics with semiconductor optical amplifier (SOA). Two configurations for optical half-adder with non-return-to-zero modulation pattern altogether with Mach-Zehnder modulator, interferometer at 50-Gbps data rate have been successfully realized. Accordingly, SUM and CARRY outputs have been concurrently executed and verified for their output waveforms. Numerical simulations for variation of data rate and key design parameters have been effectively executed outcome with optimum performance. Investigations depict overall good performance of the design in terms of the extinction factor. It also inferred that all-optical realization based on SOA is competent scheme, as it circumvents costly optoelectronic translation. This could be well supportive to erect larger complex optical combinational circuits.

QCE: A Simulator for Quantum Computer Hardware

NASA Astrophysics Data System (ADS)

Michielsen, Kristel; de Raedt, Hans

2003-09-01

The Quantum Computer Emulator (QCE) described in this paper consists of a simulator of a generic, general purpose quantum computer and a graphical user interface. The latter is used to control the simulator, to define the hardware of the quantum computer and to debug and execute quantum algorithms. QCE runs in a Windows 98/NT/2000/ME/XP environment. It can be used to validate designs of physically realizable quantum processors and as an interactive educational tool to learn about quantum computers and quantum algorithms. A detailed exposition is given of the implementation of the CNOT and the Toffoli gate, the quantum Fourier transform, Grover's database search algorithm, an order finding algorithm, Shor's algorithm, a three-input adder and a number partitioning algorithm. We also review the results of simulations of an NMR-like quantum computer.

Identifying the time scale of synchronous movement: a study on tropical snakes.

PubMed

Lindström, Tom; Phillips, Benjamin L; Brown, Gregory P; Shine, Richard

2015-01-01

Individual movement is critical to organismal fitness and also influences broader population processes such as demographic stochasticity and gene flow. Climatic change and habitat fragmentation render the drivers of individual movement especially critical to understand. Rates of movement of free-ranging animals through the landscape are influenced both by intrinsic attributes of an organism (e.g., size, body condition, age), and by external forces (e.g., weather, predation risk). Statistical modelling can clarify the relative importance of those processes, because externally-imposed pressures should generate synchronous displacements among individuals within a population, whereas intrinsic factors should generate consistency through time within each individual. External and intrinsic factors may vary in importance at different time scales. In this study we focused on daily displacement of an ambush-foraging snake from tropical Australia (the Northern Death Adder Acanthophis praelongus), based on a radiotelemetric study. We used a mixture of spectral representation and Bayesian inference to study synchrony in snake displacement by phase shift analysis. We further studied autocorrelation in fluctuations of displacement distances as "one over f noise". Displacement distances were positively autocorrelated with all considered noise colour parameters estimated as >0. We show how the methodology can reveal time scales of particular interest for synchrony and found that for the analysed data, synchrony was only present at time scales above approximately three weeks. We conclude that the spectral representation combined with Bayesian inference is a promising approach for analysis of movement data. Applying the framework to telemetry data of A. praelongus, we were able to identify a cut-off time scale above which we found support for synchrony, thus revealing a time scale where global external drivers have a larger impact on the movement behaviour. Our results suggest that for the considered study period, movement at shorter time scales was primarily driven by factors at the individual level; daily fluctuations in weather conditions had little effect on snake movement.

Fast and Scalable Computation of the Forward and Inverse Discrete Periodic Radon Transform.

PubMed

Carranza, Cesar; Llamocca, Daniel; Pattichis, Marios

2016-01-01

The discrete periodic radon transform (DPRT) has extensively been used in applications that involve image reconstructions from projections. Beyond classic applications, the DPRT can also be used to compute fast convolutions that avoids the use of floating-point arithmetic associated with the use of the fast Fourier transform. Unfortunately, the use of the DPRT has been limited by the need to compute a large number of additions and the need for a large number of memory accesses. This paper introduces a fast and scalable approach for computing the forward and inverse DPRT that is based on the use of: a parallel array of fixed-point adder trees; circular shift registers to remove the need for accessing external memory components when selecting the input data for the adder trees; an image block-based approach to DPRT computation that can fit the proposed architecture to available resources; and fast transpositions that are computed in one or a few clock cycles that do not depend on the size of the input image. As a result, for an N × N image (N prime), the proposed approach can compute up to N(2) additions per clock cycle. Compared with the previous approaches, the scalable approach provides the fastest known implementations for different amounts of computational resources. For example, for a 251×251 image, for approximately 25% fewer flip-flops than required for a systolic implementation, we have that the scalable DPRT is computed 36 times faster. For the fastest case, we introduce optimized just 2N + ⌈log(2) N⌉ + 1 and 2N + 3 ⌈log(2) N⌉ + B + 2 cycles, architectures that can compute the DPRT and its inverse in respectively, where B is the number of bits used to represent each input pixel. On the other hand, the scalable DPRT approach requires more 1-b additions than for the systolic implementation and provides a tradeoff between speed and additional 1-b additions. All of the proposed DPRT architectures were implemented in VHSIC Hardware Description Language (VHDL) and validated using an Field-Programmable Gate Array (FPGA) implementation.

Catalytic nucleic acids (DNAzymes) as functional units for logic gates and computing circuits: from basic principles to practical applications.

PubMed

Orbach, Ron; Willner, Bilha; Willner, Itamar

2015-03-11

This feature article addresses the implementation of catalytic nucleic acids as functional units for the construction of logic gates and computing circuits, and discusses the future applications of these systems. The assembly of computational modules composed of DNAzymes has led to the operation of a universal set of logic gates, to field programmable logic gates and computing circuits, to the development of multiplexers/demultiplexers, and to full-adder systems. Also, DNAzyme cascades operating as logic gates and computing circuits were demonstrated. DNAzyme logic systems find important practical applications. These include the use of DNAzyme-based systems for sensing and multiplexed analyses, for the development of controlled release and drug delivery systems, for regulating intracellular biosynthetic pathways, and for the programmed synthesis and operation of cascades.

Design of Improved Arithmetic Logic Unit in Quantum-Dot Cellular Automata

NASA Astrophysics Data System (ADS)

Heikalabad, Saeed Rasouli; Gadim, Mahya Rahimpour

2018-06-01

The quantum-dot cellular automata (QCA) can be replaced to overcome the limitation of CMOS technology. An arithmetic logic unit (ALU) is a basic structure of any computer devices. In this paper, design of improved single-bit arithmetic logic unit in quantum dot cellular automata is presented. The proposed structure for ALU has AND, OR, XOR and ADD operations. A unique 2:1 multiplexer, an ultra-efficient two-input XOR and a low complexity full adder are used in the proposed structure. Also, an extended design of this structure is provided for two-bit ALU in this paper. The proposed structure of ALU is simulated by QCADesigner and simulation result is evaluated. Evaluation results show that the proposed design has best performance in terms of area, complexity and delay compared to the previous designs.

Design of Improved Arithmetic Logic Unit in Quantum-Dot Cellular Automata

NASA Astrophysics Data System (ADS)

Heikalabad, Saeed Rasouli; Gadim, Mahya Rahimpour

2018-03-01

The quantum-dot cellular automata (QCA) can be replaced to overcome the limitation of CMOS technology. An arithmetic logic unit (ALU) is a basic structure of any computer devices. In this paper, design of improved single-bit arithmetic logic unit in quantum dot cellular automata is presented. The proposed structure for ALU has AND, OR, XOR and ADD operations. A unique 2:1 multiplexer, an ultra-efficient two-input XOR and a low complexity full adder are used in the proposed structure. Also, an extended design of this structure is provided for two-bit ALU in this paper. The proposed structure of ALU is simulated by QCADesigner and simulation result is evaluated. Evaluation results show that the proposed design has best performance in terms of area, complexity and delay compared to the previous designs.

DNA-programmed dynamic assembly of quantum dots for molecular computation.

PubMed

He, Xuewen; Li, Zhi; Chen, Muzi; Ma, Nan

2014-12-22

Despite the widespread use of quantum dots (QDs) for biosensing and bioimaging, QD-based bio-interfaceable and reconfigurable molecular computing systems have not yet been realized. DNA-programmed dynamic assembly of multi-color QDs is presented for the construction of a new class of fluorescence resonance energy transfer (FRET)-based QD computing systems. A complete set of seven elementary logic gates (OR, AND, NOR, NAND, INH, XOR, XNOR) are realized using a series of binary and ternary QD complexes operated by strand displacement reactions. The integration of different logic gates into a half-adder circuit for molecular computation is also demonstrated. This strategy is quite versatile and straightforward for logical operations and would pave the way for QD-biocomputing-based intelligent molecular diagnostics. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Highly efficient hybrid energy generator: coupled organic photovoltaic device and randomly oriented electrospun poly(vinylidene fluoride) nanofiber.

PubMed

Park, Boongik; Lee, Kihwan; Park, Jongjin; Kim, Jongmin; Kim, Ohyun

2013-03-01

A hybrid architecture consisting of an inverted organic photovoltaic device and a randomly-oriented electrospun PVDF piezoelectric device was fabricated as a highly-efficient energy generator. It uses the inverted photovoltaic device with coupled electrospun PVDF nanofibers as tandem structure to convert solar and mechanical vibrations energy to electricity simultaneously or individually. The power conversion efficiency of the photovoltaic device was also significantly improved up to 4.72% by optimized processes such as intrinsic ZnO, MoO3 and active layer. A simple electrospinning method with the two electrode technique was adopted to achieve a high voltage of - 300 mV in PVDF piezoelectric fibers. Highly-efficient HEG using voltage adder circuit provides the conceptual possibility of realizing multi-functional energy generator whenever and wherever various energy sources are available.

Optimized 4-bit Quantum Reversible Arithmetic Logic Unit

NASA Astrophysics Data System (ADS)

Ayyoub, Slimani; Achour, Benslama

2017-08-01

Reversible logic has received a great attention in the recent years due to its ability to reduce the power dissipation. The main purposes of designing reversible logic are to decrease quantum cost, depth of the circuits and the number of garbage outputs. The arithmetic logic unit (ALU) is an important part of central processing unit (CPU) as the execution unit. This paper presents a complete design of a new reversible arithmetic logic unit (ALU) that can be part of a programmable reversible computing device such as a quantum computer. The proposed ALU based on a reversible low power control unit and small performance parameters full adder named double Peres gates. The presented ALU can produce the largest number (28) of arithmetic and logic functions and have the smallest number of quantum cost and delay compared with existing designs.

A single-layer platform for Boolean logic and arithmetic through DNA excision in mammalian cells

PubMed Central

Weinberg, Benjamin H.; Hang Pham, N. T.; Caraballo, Leidy D.; Lozanoski, Thomas; Engel, Adrien; Bhatia, Swapnil; Wong, Wilson W.

2017-01-01

Genetic circuits engineered for mammalian cells often require extensive fine-tuning to perform their intended functions. To overcome this problem, we present a generalizable biocomputing platform that can engineer genetic circuits which function in human cells with minimal optimization. We used our Boolean Logic and Arithmetic through DNA Excision (BLADE) platform to build more than 100 multi-input-multi-output circuits. We devised a quantitative metric to evaluate the performance of the circuits in human embryonic kidney and Jurkat T cells. Of 113 circuits analysed, 109 functioned (96.5%) with the correct specified behavior without any optimization. We used our platform to build a three-input, two-output Full Adder and six-input, one-output Boolean Logic Look Up Table. We also used BLADE to design circuits with temporal small molecule-mediated inducible control and circuits that incorporate CRISPR/Cas9 to regulate endogenous mammalian genes. PMID:28346402

Nonvolatile reconfigurable sequential logic in a HfO2 resistive random access memory array.

PubMed

Zhou, Ya-Xiong; Li, Yi; Su, Yu-Ting; Wang, Zhuo-Rui; Shih, Ling-Yi; Chang, Ting-Chang; Chang, Kuan-Chang; Long, Shi-Bing; Sze, Simon M; Miao, Xiang-Shui

2017-05-25

Resistive random access memory (RRAM) based reconfigurable logic provides a temporal programmable dimension to realize Boolean logic functions and is regarded as a promising route to build non-von Neumann computing architecture. In this work, a reconfigurable operation method is proposed to perform nonvolatile sequential logic in a HfO 2 -based RRAM array. Eight kinds of Boolean logic functions can be implemented within the same hardware fabrics. During the logic computing processes, the RRAM devices in an array are flexibly configured in a bipolar or complementary structure. The validity was demonstrated by experimentally implemented NAND and XOR logic functions and a theoretically designed 1-bit full adder. With the trade-off between temporal and spatial computing complexity, our method makes better use of limited computing resources, thus provides an attractive scheme for the construction of logic-in-memory systems.

Quantum realization of the bilinear interpolation method for NEQR.

PubMed

Zhou, Ri-Gui; Hu, Wenwen; Fan, Ping; Ian, Hou

2017-05-31

In recent years, quantum image processing is one of the most active fields in quantum computation and quantum information. Image scaling as a kind of image geometric transformation has been widely studied and applied in the classical image processing, however, the quantum version of which does not exist. This paper is concerned with the feasibility of the classical bilinear interpolation based on novel enhanced quantum image representation (NEQR). Firstly, the feasibility of the bilinear interpolation for NEQR is proven. Then the concrete quantum circuits of the bilinear interpolation including scaling up and scaling down for NEQR are given by using the multiply Control-Not operation, special adding one operation, the reverse parallel adder, parallel subtractor, multiplier and division operations. Finally, the complexity analysis of the quantum network circuit based on the basic quantum gates is deduced. Simulation result shows that the scaled-up image using bilinear interpolation is clearer and less distorted than nearest interpolation.

Microcomputer control of infrared detector arrays used in direct imaging and in Fabry-Perot spectroscopy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rossano, G.S.

1989-02-01

A microcomputer based data acquisition system has been developed for astronomical observing with two-dimensional infrared detector arrays operating at high pixel rates. The system is based on a 16-bit 8086/8087 microcomputer operating at 10 MHz. Data rates of up to 560,000 pixels/sec from arrays of up to 4096 elements are supported using the microcomputer system alone. A hardware co-adder the authors are developing permits data accumulation at rates of up to 1.67 million pixels/sec in both staring and chopped data acquisition modes. The system has been used for direct imaging and for data acquisition in a Fabry-Perot Spectrometer developed bymore » NRL. The hardware is operated using interactive software which supports the several available modes of data acquisition, and permits data display and reduction during observing sessions.« less

Power optimization in logic isomers

NASA Technical Reports Server (NTRS)

Panwar, Ramesh; Rennels, David; Alkalaj, Leon

1993-01-01

Logic isomers are labeled, 2-isomorphic graphs that implement the same logic function. Logic isomers may have significantly different power requirements even though they have the same number of transistors in the implementation. The power requirements of the isomers depend on the transition activity of the input signals. The power requirements of isomorphic graph isomers of n-input NAND and NOR gates are shown. Choosing the less power-consuming isomer instead of the others can yield significant power savings. Experimental results on a ripple-carry adder are presented to show that the implementation using the least power-consuming isomers requires approximately 10 percent less power than the implementation using the most power-consuming isomers. Simulations of other random logic designs also confirm that designs using less power-consuming isomers can reduce the logic power demand by approximately 10 percent as compared to designs using more power-consuming isomers.

Design and implementation of an efficient single layer five input majority voter gate in quantum-dot cellular automata.

PubMed

Bahar, Ali Newaz; Waheed, Sajjad

2016-01-01

The fundamental logical element of a quantum-dot cellular automata (QCA) circuit is majority voter gate (MV). The efficiency of a QCA circuit is depends on the efficiency of the MV. This paper presents an efficient single layer five-input majority voter gate (MV5). The structure of proposed MV5 is very simple and easy to implement in any logical circuit. This proposed MV5 reduce number of cells and use conventional QCA cells. However, using MV5 a multilayer 1-bit full-adder (FA) is designed. The functional accuracy of the proposed MV5 and FA are confirmed by QCADesigner a well-known QCA layout design and verification tools. Furthermore, the power dissipation of proposed circuits are estimated, which shows that those circuits dissipate extremely small amount of energy and suitable for reversible computing. The simulation outcomes demonstrate the superiority of the proposed circuit.

SABRE, a 10-MV linear induction accelerator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Corely, J.P.; Alexander, J.A.; Pankuch, P.J.

SABRE (Sandia Accelerator and Beam Research Experiment) is a 10-MV, 250-kA, 40-ns linear induction accelerator. It was designed to be used in positive polarity output. Positive polarity accelerators are important for application to Sandia's ICF (Inertial Confinement Fusion) and LMF (Laboratory Microfusion Facility) program efforts. SABRE was built to allow a more detailed study of pulsed power issues associated with positive polarity output machines. MITL (Magnetically Insulated Transmission Line) voltage adder efficiency, extraction ion diode development, and ion beam transport and focusing. The SABRE design allows the system to operate in either positive polarity output for ion extraction applications ormore » negative polarity output for more conventional electron beam loads. Details of the design of SABRE and the results of initial machine performance in negative polarity operation are presented in this paper. 13 refs., 12 figs., 1 tab.« less

Designs of Optoelectronic Trinary Signed-Digit Multiplication by use of Joint Spatial Encodings and Optical Correlation

NASA Astrophysics Data System (ADS)

Cherri, Abdallah K.

1999-02-01

Trinary signed-digit (TSD) symbolic-substitution-based (SS-based) optical adders, which were recently proposed, are used as the basic modules for designing highly parallel optical multiplications by use of cascaded optical correlators. The proposed multiplications perform carry-free generation of the multiplication partial products of two words in constant time. Also, three different multiplication designs are presented, and new joint spatial encodings for the TSD numbers are introduced. The proposed joint spatial encodings allow one to reduce the SS computation rules involved in optical multiplication. In addition, the proposed joint spatial encodings increase the space bandwidth product of the spatial light modulators of the optical system. This increase is achieved by reduction of the numbers of pixels in the joint spatial encodings for the input TSD operands as well as reduction of the number of pixels used in the proposed matched spatial filters for the optical multipliers.

Designs of optoelectronic trinary signed-digit multiplication by use of joint spatial encodings and optical correlation.

PubMed

Cherri, A K

1999-02-10

Trinary signed-digit (TSD) symbolic-substitution-based (SS-based) optical adders, which were recently proposed, are used as the basic modules for designing highly parallel optical multiplications by use of cascaded optical correlators. The proposed multiplications perform carry-free generation of the multiplication partial products of two words in constant time. Also, three different multiplication designs are presented, and new joint spatial encodings for the TSD numbers are introduced. The proposed joint spatial encodings allow one to reduce the SS computation rules involved in optical multiplication. In addition, the proposed joint spatial encodings increase the space-bandwidth product of the spatial light modulators of the optical system. This increase is achieved by reduction of the numbers of pixels in the joint spatial encodings for the input TSD operands as well as reduction of the number of pixels used in the proposed matched spatial filters for the optical multipliers.

Repetitively Pulsed High Power RF Solid-State System

NASA Astrophysics Data System (ADS)

Bowman, Chris; Ziemba, Timothy; Miller, Kenneth E.; Prager, James; Quinley, Morgan

2017-10-01

Eagle Harbor Technologies, Inc. (EHT) is developing a low-cost, fully solid-state architecture for the generation of the RF frequencies and power levels necessary for plasma heating and diagnostic systems at validation platform experiments within the fusion science community. In Year 1 of this program, EHT has developed a solid-state RF system that combines an inductive adder, nonlinear transmission line (NLTL), and antenna into a single system that can be deployed at fusion science experiments. EHT has designed and optimized a lumped-element NLTL that will be suitable RF generation near the lower-hybrid frequency at the High Beta Tokamak (HBT) located at Columbia University. In Year 2, EHT will test this system at the Helicity Injected Torus at the University of Washington and HBT at Columbia. EHT will present results from Year 1 testing and optimization of the NLTL-based RF system. With support of DOE SBIR.

Vertical blind phase search for low-complexity carrier phase recovery of offset-QAM Nyquist WDM transmission

NASA Astrophysics Data System (ADS)

Lu, Jianing; Fu, Songnian; Tang, Haoyuan; Xiang, Meng; Tang, Ming; Liu, Deming

2017-01-01

Low complexity carrier phase recovery (CPR) scheme based on vertical blind phase search (V-BPS) for M-ary offset quadrature amplitude modulation (OQAM) is proposed and numerically verified. After investigating the constellations of both even and odd samples with respect to the phase noise, we identify that the CPR can be realized by measuring the verticality of constellation with respect to different test phase angles. Then measurement without multiplication in the complex plane is found with low complexity. Furthermore, a two-stage configuration is put forward to further reduce the computational complexity (CC). Compared with our recently proposed modified blind phase search (M-BPS) algorithm, the proposed algorithm shows comparable tolerance of phase noise, but reduces the CC by a factor of 3.81 (or 3.05) in the form of multipliers (or adders), taking the CPR of 16-OQAM into account.

Exploring hurdles to transfer : student experiences of applying knowledge across disciplines

NASA Astrophysics Data System (ADS)

Lappalainen, Jouni; Rosqvist, Juho

2015-04-01

This paper explores the ways students perceive the transfer of learned knowledge to new situations - often a surprisingly difficult prospect. The novel aspect compared to the traditional transfer studies is that the learning phase is not a part of the experiment itself. The intention was only to activate acquired knowledge relevant to the transfer target using a short primer immediately prior to the situation where the knowledge was to be applied. Eight volunteer students from either mathematics or computer science curricula were given a task of designing an adder circuit using logic gates: a new context in which to apply knowledge of binary arithmetic and Boolean algebra. The results of a phenomenographic classification of the views presented by the students in their post-experiment interviews are reported. The degree to which the students were conscious of the acquired knowledge they employed and how they applied it in a new context emerged as the differentiating factors.

Adiabatic quantum-flux-parametron cell library adopting minimalist design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Takeuchi, Naoki, E-mail: takeuchi-naoki-kx@ynu.jp; Yamanashi, Yuki; Yoshikawa, Nobuyuki

We herein build an adiabatic quantum-flux-parametron (AQFP) cell library adopting minimalist design and a symmetric layout. In the proposed minimalist design, every logic cell is designed by arraying four types of building block cells: buffer, NOT, constant, and branch cells. Therefore, minimalist design enables us to effectively build and customize an AQFP cell library. The symmetric layout reduces unwanted parasitic magnetic coupling and ensures a large mutual inductance in an output transformer, which enables very long wiring between logic cells. We design and fabricate several logic circuits using the minimal AQFP cell library so as to test logic cells inmore » the library. Moreover, we experimentally investigate the maximum wiring length between logic cells. Finally, we present an experimental demonstration of an 8-bit carry look-ahead adder designed using the minimal AQFP cell library and demonstrate that the proposed cell library is sufficiently robust to realize large-scale digital circuits.« less

Adiabatic quantum-flux-parametron cell library adopting minimalist design

NASA Astrophysics Data System (ADS)

Takeuchi, Naoki; Yamanashi, Yuki; Yoshikawa, Nobuyuki

2015-05-01

We herein build an adiabatic quantum-flux-parametron (AQFP) cell library adopting minimalist design and a symmetric layout. In the proposed minimalist design, every logic cell is designed by arraying four types of building block cells: buffer, NOT, constant, and branch cells. Therefore, minimalist design enables us to effectively build and customize an AQFP cell library. The symmetric layout reduces unwanted parasitic magnetic coupling and ensures a large mutual inductance in an output transformer, which enables very long wiring between logic cells. We design and fabricate several logic circuits using the minimal AQFP cell library so as to test logic cells in the library. Moreover, we experimentally investigate the maximum wiring length between logic cells. Finally, we present an experimental demonstration of an 8-bit carry look-ahead adder designed using the minimal AQFP cell library and demonstrate that the proposed cell library is sufficiently robust to realize large-scale digital circuits.

Integrated logic circuits using single-atom transistors

PubMed Central

Mol, J. A.; Verduijn, J.; Levine, R. D.; Remacle, F.

2011-01-01

Scaling down the size of computing circuits is about to reach the limitations imposed by the discrete atomic structure of matter. Reducing the power requirements and thereby dissipation of integrated circuits is also essential. New paradigms are needed to sustain the rate of progress that society has become used to. Single-atom transistors, SATs, cascaded in a circuit are proposed as a promising route that is compatible with existing technology. We demonstrate the use of quantum degrees of freedom to perform logic operations in a complementary-metal–oxide–semiconductor device. Each SAT performs multilevel logic by electrically addressing the electronic states of a dopant atom. A single electron transistor decodes the physical multivalued output into the conventional binary output. A robust scalable circuit of two concatenated full adders is reported, where by utilizing charge and quantum degrees of freedom, the functionality of the transistor is pushed far beyond that of a simple switch. PMID:21808050

Graphene barristor, a triode device with a gate-controlled Schottky barrier.

PubMed

Yang, Heejun; Heo, Jinseong; Park, Seongjun; Song, Hyun Jae; Seo, David H; Byun, Kyung-Eun; Kim, Philip; Yoo, InKyeong; Chung, Hyun-Jong; Kim, Kinam

2012-06-01

Despite several years of research into graphene electronics, sufficient on/off current ratio I(on)/I(off) in graphene transistors with conventional device structures has been impossible to obtain. We report on a three-terminal active device, a graphene variable-barrier "barristor" (GB), in which the key is an atomically sharp interface between graphene and hydrogenated silicon. Large modulation on the device current (on/off ratio of 10(5)) is achieved by adjusting the gate voltage to control the graphene-silicon Schottky barrier. The absence of Fermi-level pinning at the interface allows the barrier's height to be tuned to 0.2 electron volt by adjusting graphene's work function, which results in large shifts of diode threshold voltages. Fabricating GBs on respective 150-mm wafers and combining complementary p- and n-type GBs, we demonstrate inverter and half-adder logic circuits.

VLSI processors for signal detection in SETI

NASA Technical Reports Server (NTRS)

Duluk, J. F.; Linscott, I. R.; Peterson, A. M.; Burr, J.; Ekroot, B.; Twicken, J.

1989-01-01

The objective of the Search for Extraterrestrial Intelligence (SETI) is to locate an artificially created signal coming from a distant star. This is done in two steps: (1) spectral analysis of an incoming radio frequency band, and (2) pattern detection for narrow-band signals. Both steps are computationally expensive and require the development of specially designed computer architectures. To reduce the size and cost of the SETI signal detection machine, two custom VLSI chips are under development. The first chip, the SETI DSP Engine, is used in the spectrum analyzer and is specially designed to compute Discrete Fourier Transforms (DFTs). It is a high-speed arithmetic processor that has two adders, one multiplier-accumulator, and three four-port memories. The second chip is a new type of Content-Addressable Memory. It is the heart of an associative processor that is used for pattern detection. Both chips incorporate many innovative circuits and architectural features.

VLSI processors for signal detection in SETI.

PubMed

Duluk, J F; Linscott, I R; Peterson, A M; Burr, J; Ekroot, B; Twicken, J

1989-01-01

The objective of the Search for Extraterrestrial Intelligence (SETI) is to locate an artificially created signal coming from a distant star. This is done in two steps: (1) spectral analysis of an incoming radio frequency band, and (2) pattern detection for narrow-band signals. Both steps are computationally expensive and require the development of specially designed computer architectures. To reduce the size and cost of the SETI signal detection machine, two custom VLSI chips are under development. The first chip, the SETI DSP Engine, is used in the spectrum analyzer and is specially designed to compute Discrete Fourier Transforms (DFTs). It is a high-speed arithmetic processor that has two adders, one multiplier-accumulator, and three four-port memories. The second chip is a new type of Content-Addressable Memory. It is the heart of an associative processor that is used for pattern detection. Both chips incorporate many innovative circuits and architectural features.

Symmetry boost of the fidelity of Shor factoring

NASA Astrophysics Data System (ADS)

Nam, Y. S.; Blümel, R.

2018-05-01

In Shor's algorithm quantum subroutines occur with the structure F U F-1 , where F is a unitary transform and U is performing a quantum computation. Examples are quantum adders and subunits of quantum modulo adders. In this paper we show, both analytically and numerically, that if, in analogy to spin echoes, F and F-1 can be implemented symmetrically when executing Shor's algorithm on actual, imperfect quantum hardware, such that F and F-1 have the same hardware errors, a symmetry boost in the fidelity of the combined F U F-1 quantum operation results when compared to the case in which the errors in F and F-1 are independently random. Running the complete gate-by-gate implemented Shor algorithm, we show that the symmetry-induced fidelity boost can be as large as a factor 4. While most of our analytical and numerical results concern the case of over- and under-rotation of controlled rotation gates, in the numerically accessible case of Shor's algorithm with a small number of qubits, we show explicitly that the symmetry boost is robust with respect to more general types of errors. While, expectedly, additional error types reduce the symmetry boost, we show explicitly, by implementing general off-diagonal SU (N ) errors (N =2 ,4 ,8 ), that the boost factor scales like a Lorentzian in δ /σ , where σ and δ are the error strengths of the diagonal over- and underrotation errors and the off-diagonal SU (N ) errors, respectively. The Lorentzian shape also shows that, while the boost factor may become small with increasing δ , it declines slowly (essentially like a power law) and is never completely erased. We also investigate the effect of diagonal nonunitary errors, which, in analogy to unitary errors, reduce but never erase the symmetry boost. Going beyond the case of small quantum processors, we present analytical scaling results that show that the symmetry boost persists in the practically interesting case of a large number of qubits. We illustrate this result explicitly for the case of Shor factoring of the semiprime RSA-1024, where, analytically, focusing on over- and underrotation errors, we obtain a boost factor of about 10. In addition, we provide a proof of the fidelity product formula, including its range of applicability.

Boolean gates on actin filaments

NASA Astrophysics Data System (ADS)

Siccardi, Stefano; Tuszynski, Jack A.; Adamatzky, Andrew

2016-01-01

Actin is a globular protein which forms long polar filaments in the eukaryotic cytoskeleton. Actin networks play a key role in cell mechanics and cell motility. They have also been implicated in information transmission and processing, memory and learning in neuronal cells. The actin filaments have been shown to support propagation of voltage pulses. Here we apply a coupled nonlinear transmission line model of actin filaments to study interactions between voltage pulses. To represent digital information we assign a logical TRUTH value to the presence of a voltage pulse in a given location of the actin filament, and FALSE to the pulse's absence, so that information flows along the filament with pulse transmission. When two pulses, representing Boolean values of input variables, interact, then they can facilitate or inhibit further propagation of each other. We explore this phenomenon to construct Boolean logical gates and a one-bit half-adder with interacting voltage pulses. We discuss implications of these findings on cellular process and technological applications.

Light-Gated Memristor with Integrated Logic and Memory Functions.

PubMed

Tan, Hongwei; Liu, Gang; Yang, Huali; Yi, Xiaohui; Pan, Liang; Shang, Jie; Long, Shibing; Liu, Ming; Wu, Yihong; Li, Run-Wei

2017-11-28

Memristive devices are able to store and process information, which offers several key advantages over the transistor-based architectures. However, most of the two-terminal memristive devices have fixed functions once made and cannot be reconfigured for other situations. Here, we propose and demonstrate a memristive device "memlogic" (memory logic) as a nonvolatile switch of logic operations integrated with memory function in a single light-gated memristor. Based on nonvolatile light-modulated memristive switching behavior, a single memlogic cell is able to achieve optical and electrical mixed basic Boolean logic of reconfigurable "AND", "OR", and "NOT" operations. Furthermore, the single memlogic cell is also capable of functioning as an optical adder and digital-to-analog converter. All the memlogic outputs are memristive for in situ data storage due to the nonvolatile resistive switching and persistent photoconductivity effects. Thus, as a memdevice, the memlogic has potential for not only simplifying the programmable logic circuits but also building memristive multifunctional optoelectronics.

Active Detection of Shielded Special Nuclear Material in the Presence of Variable High Backgrounds Using a Mixed Photon-Neutron Source

NASA Astrophysics Data System (ADS)

Martin, Philip N.; Clemett, Ceri D.; Hill, Cassie; O'Malley, John; Campbell, Ben

This paper describes and compares two approaches to the analysis of active interrogation data containing high photon backgrounds associated with mixed photon-neutron source flash active interrogation. Results from liquid scintillation detectors (EJ301/EJ309) fielded at the Naval Research Laboratory (NRL), in collaboration with the Atomic Weapons Establishment (AWE), using the NRL Mercury Inductive Voltage Adder (IVA) operating in both a photon and mixed photon-neutron mode at a Depleted Uranium (DU) target are presented. The standard approach applying a Figure of Merit (FOM) consisting of background sigma above background is compared with an approach looking to fit only the time-decaying photon signal with standard delayed photon emission from ∼10-MeV end-point-energy Bremsstrahlung photofission of DU. Examples where each approach does well and less well are presented together with a discussion of the relative limitations of both approaches to the type of mixed photon-neutron flash active interrogation being considered.

Development of EUV mask handling technology at MIRAI-Selete

NASA Astrophysics Data System (ADS)

Ota, Kazuya; Amemiya, Mitsuaki; Taguchi, Takao; Kamono, Takashi; Kubo, Hiroyoshi; Takikawa, Tadahiko; Usui, Yoichi; Suga, Osamu

2007-03-01

We, MIRAI-Selete, started a new EUV mask program in April, 2006. Development of EUV mask handling technology is one of the key areas of the program. We plan to develop mask handling technology and to evaluate EUV mask carriers using Lasertec M3350, a particle inspection tool with the defect sensitivity less than 50nm PSL, and Mask Protection Engineering Tool (named "MPE Tool"). M3350 is a newly developed tool based on a conventional M1350 for EUV blanks inspection. Since our M3350 has a blank flipping mechanism in it, we can inspect the front and the back surface of the blank automatically. We plan to use the M3350 for evaluating particle adders during mask shipping, storage and handling. MPE Tool is a special tool exclusively developed for demonstration of pellicleless mask handling. It can handle a mask within a protective enclosure, which Canon and Nikon have been jointly proposing1, and also, can be modified to handle other type of carrier as the need arises.

Design and implementation in VHDL code of the two-dimensional fast Fourier transform for frequency filtering, convolution and correlation operations

NASA Astrophysics Data System (ADS)

Vilardy, Juan M.; Giacometto, F.; Torres, C. O.; Mattos, L.

2011-01-01

The two-dimensional Fast Fourier Transform (FFT 2D) is an essential tool in the two-dimensional discrete signals analysis and processing, which allows developing a large number of applications. This article shows the description and synthesis in VHDL code of the FFT 2D with fixed point binary representation using the programming tool Simulink HDL Coder of Matlab; showing a quick and easy way to handle overflow, underflow and the creation registers, adders and multipliers of complex data in VHDL and as well as the generation of test bench for verification of the codes generated in the ModelSim tool. The main objective of development of the hardware architecture of the FFT 2D focuses on the subsequent completion of the following operations applied to images: frequency filtering, convolution and correlation. The description and synthesis of the hardware architecture uses the XC3S1200E family Spartan 3E FPGA from Xilinx Manufacturer.

Environmental externalities: Thinking globally, taxing locally

DOE Office of Scientific and Technical Information (OSTI.GOV)

Trisko, E.M.

1993-03-01

Assigning monetary externality values to the airborne emissions of electric power plants is gaining the attention of state utility commissions as a means to measure the social costs of alternative energy investments. Some commissions are using environmental externalities to encourage utility investments in energy conservation and renewable energy technologies such as solar, wind, and biomass. However, the monetization of externalities through so-called adders to direct generation costs can lead to inefficient resource allocation and expose consumers to electric rate increases without corresponding environmental benefits. The addition of externality values to direct electric generation costs distorts the economics of power supplymore » planning by creating artificial subsidies for generation sources that are not currently competitive in the market. Businesses and consumers will be forced to support higher-cost sources of electric generation as a consequence. Because pollutant emissions of all new sources of electric generation are stringently regulated, and generally are well below those of existing fossil-fired sources, little demonstrable environmental benefit would result from the expanded use of externality valuation.« less

A programmable systolic array correlator as a trigger processor for electron pairs in rich (ring image Cherenkov) counters

NASA Astrophysics Data System (ADS)

Männer, R.

1989-12-01

This paper describes a systolic array processor for a ring image Cherenkov counter which is capable of identifying pairs of electron circles with a known radius and a certain minimum distance within 15 μs. The processor is a very flexible and fast device. It consists of 128 x 128 processing elements (PEs), where one PE is assigned to each pixel of the image. All PEs run synchronously at 40 MHz. The identification of electron circles is done by correlating the detector image with the proper circle circumference. Circle centers are found by peak detection in the correlation result. A second correlation with a circle disc allows circles of closed electron pairs to be rejected. The trigger decision is generated if a pseudo adder detects at least two remaining circles. The device is controlled by a freely programmable sequencer. A VLSI chip containing 8 x 8 PEs is being developed using a VENUS design system and will be produced in 2μ CMOS technology.

A Single Chip VLSI Implementation of a QPSK/SQPSK Demodulator for a VSAT Receiver Station

NASA Technical Reports Server (NTRS)

Kwatra, S. C.; King, Brent

1995-01-01

This thesis presents a VLSI implementation of a QPSK/SQPSK demodulator. It is designed to be employed in a VSAT earth station that utilizes the FDMA/TDM link. A single chip architecture is used to enable this chip to be easily employed in the VSAT system. This demodulator contains lowpass filters, integrate and dump units, unique word detectors, a timing recovery unit, a phase recovery unit and a down conversion unit. The design stages start with a functional representation of the system by using the C programming language. Then it progresses into a register based representation using the VHDL language. The layout components are designed based on these VHDL models and simulated. Component generators are developed for the adder, multiplier, read-only memory and serial access memory in order to shorten the design time. These sub-components are then block routed to form the main components of the system. The main components are block routed to form the final demodulator.

FAST TRACK COMMUNICATION: Reversible arithmetic logic unit for quantum arithmetic

NASA Astrophysics Data System (ADS)

Kirkedal Thomsen, Michael; Glück, Robert; Axelsen, Holger Bock

2010-09-01

This communication presents the complete design of a reversible arithmetic logic unit (ALU) that can be part of a programmable reversible computing device such as a quantum computer. The presented ALU is garbage free and uses reversible updates to combine the standard reversible arithmetic and logical operations in one unit. Combined with a suitable control unit, the ALU permits the construction of an r-Turing complete computing device. The garbage-free ALU developed in this communication requires only 6n elementary reversible gates for five basic arithmetic-logical operations on two n-bit operands and does not use ancillae. This remarkable low resource consumption was achieved by generalizing the V-shape design first introduced for quantum ripple-carry adders and nesting multiple V-shapes in a novel integrated design. This communication shows that the realization of an efficient reversible ALU for a programmable computing device is possible and that the V-shape design is a very versatile approach to the design of quantum networks.

Two-step digit-set-restricted modified signed-digit addition-subtraction algorithm and its optoelectronic implementation.

PubMed

Qian, F; Li, G; Ruan, H; Jing, H; Liu, L

1999-09-10

A novel, to our knowledge, two-step digit-set-restricted modified signed-digit (MSD) addition-subtraction algorithm is proposed. With the introduction of the reference digits, the operand words are mapped into an intermediate carry word with all digits restricted to the set {1, 0} and an intermediate sum word with all digits restricted to the set {0, 1}, which can be summed to form the final result without carry generation. The operation can be performed in parallel by use of binary logic. An optical system that utilizes an electron-trapping device is suggested for accomplishing the required binary logic operations. By programming of the illumination of data arrays, any complex logic operations of multiple variables can be realized without additional temporal latency of the intermediate results. This technique has a high space-bandwidth product and signal-to-noise ratio. The main structure can be stacked to construct a compact optoelectronic MSD adder-subtracter.

Real-time phase correlation based integrated system for seizure detection

NASA Astrophysics Data System (ADS)

Romaine, James B.; Delgado-Restituto, Manuel; Leñero-Bardallo, Juan A.; Rodríguez-Vázquez, Ángel

2017-05-01

This paper reports a low area, low power, integer-based digital processor for the calculation of phase synchronization between two neural signals. The processor calculates the phase-frequency content of a signal by identifying the specific time periods associated with two consecutive minima. The simplicity of this phase-frequency content identifier allows for the digital processor to utilize only basic digital blocks, such as registers, counters, adders and subtractors, without incorporating any complex multiplication and or division algorithms. In fact, the processor, fabricated in a 0.18μm CMOS process, only occupies an area of 0.0625μm2 and consumes 12.5nW from a 1.2V supply voltage when operated at 128kHz. These low-area, low-power features make the proposed processor a valuable computing element in closed loop neural prosthesis for the treatment of neural diseases, such as epilepsy, or for extracting functional connectivity maps between different recording sites in the brain.

Submicrosecond linear pulse transformer for 800 kV voltage with modular low-inductance primary power supply

NASA Astrophysics Data System (ADS)

Bykov, Yu. A.; Krastelev, E. G.; Popov, G. V.; Sedin, A. A.; Feduschak, V. F.

2016-12-01

A pulsed power source with voltage amplitude up to 800 kV for fast charging (350-400 ns) of the forming line of a high-current nanosecond accelerator is developed. The source includes capacitive energy storage and a linear pulse transformer. The linear transformer consists of a set of 20 inductors with circular ferromagnetic cores surrounded by primary windings inside of which a common stock adder of voltage with film-glycerol insulation is placed. The primary energy storage consists of ten modules, each of which is a low-inductance assembly of two capacitors with a capacitance of 0.35 μF and one gas switch mounted in the same frame. The total energy stored in capacitors is 5.5 kJ at the operating voltage of 40 kV. According to test results, the parameters of the equivalent circuit of the source are the following: shock capacitance = 17.5 nF, inductance = 2 μH, resistance = 3.2 Ω.

Linear transformer and primary low-inductance switch and capacitor modules for fast charging of PFL

NASA Astrophysics Data System (ADS)

Bykov, Yu A.; Krastelev, E. G.; Popov, G. V.; Sedin, A. A.; Feduschak, V. F.

2017-05-01

A step-up linear pulse transformer and a modular primary powering system were developed for fast (≈350 ns) charging of a pulse forming line (PFL) of a high-current electron accelerator. The linear transformer is assembled of a set of 20 inductors with circular ferromagnetic cores and one-turn primary windings. The secondary turn is formed by housing tube walls and a voltage adder with a film-glycerol insulation installed inside of the inductors. The primary powering system assembles 10 modules, each of them is a low-inductance site of two capacitors of 0,35 µF and one gas switch mounted at the same enclosure. The total stored energy is 5.5 kJ at the charging voltage of 40 kV. According to test results, the equivalent parameters at the output of the transformer are the next: a capacity - 17.5 nF, an inductance - 2 µH, a resistance - 3.2 Ohms.

First Results from the Cornell COBRA Accelerator for Light Ion ICF Research

NASA Astrophysics Data System (ADS)

Lindholm, F.; Krastelev, E. G.; Greenly, J. B.; Kusse, B. R.

1996-11-01

COBRA, the Cornell Beam Research Accelerator, is a four-stage linear induction adder based on the Sandia National Laboratories SABRE accelerator design. The full 4 × 1 MV, 200 kA, 40 ns COBRA was completed in June 1996, after a year of initial operation with a single stage. Accelerator operation will be described, and first experimental results of power coupling and ion beam generation using a closely-coupled (short MITL) applied-B extraction ion diode load will be presented. A diagnostic package for beam optics including local microdivergence and aiming measurements is being developed, and results from both the single-stage experiments and new experiments on the full accelerator will be presented. A 20 ns, 15% voltage precursor to the main pulse resulting from coupling through the nonlinear magnetization characteristic of the Metglas^circR core at high magnetization rate was seen in the single-cell experiments. This mechanism will be discussed and its consequences on the full accelerator will be investigated.

Submicrosecond linear pulse transformer for 800 kV voltage with modular low-inductance primary power supply

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bykov, Yu. A.; Krastelev, E. G., E-mail: ekrastelev@yandex.ru; Popov, G. V.

A pulsed power source with voltage amplitude up to 800 kV for fast charging (350–400 ns) of the forming line of a high-current nanosecond accelerator is developed. The source includes capacitive energy storage and a linear pulse transformer. The linear transformer consists of a set of 20 inductors with circular ferromagnetic cores surrounded by primary windings inside of which a common stock adder of voltage with film-glycerol insulation is placed. The primary energy storage consists of ten modules, each of which is a low-inductance assembly of two capacitors with a capacitance of 0.35 μF and one gas switch mounted inmore » the same frame. The total energy stored in capacitors is 5.5 kJ at the operating voltage of 40 kV. According to test results, the parameters of the equivalent circuit of the source are the following: shock capacitance = 17.5 nF, inductance = 2 μH, resistance = 3.2 Ω.« less

Multi-Agent Methods for the Configuration of Random Nanocomputers

NASA Technical Reports Server (NTRS)

Lawson, John W.

2004-01-01

As computational devices continue to shrink, the cost of manufacturing such devices is expected to grow exponentially. One alternative to the costly, detailed design and assembly of conventional computers is to place the nano-electronic components randomly on a chip. The price for such a trivial assembly process is that the resulting chip would not be programmable by conventional means. In this work, we show that such random nanocomputers can be adaptively programmed using multi-agent methods. This is accomplished through the optimization of an associated high dimensional error function. By representing each of the independent variables as a reinforcement learning agent, we are able to achieve convergence must faster than with other methods, including simulated annealing. Standard combinational logic circuits such as adders and multipliers are implemented in a straightforward manner. In addition, we show that the intrinsic flexibility of these adaptive methods allows the random computers to be reconfigured easily, making them reusable. Recovery from faults is also demonstrated.

CF6 jet engine performance deterioration results

NASA Technical Reports Server (NTRS)

Lewis, R. J.; Humerickhouse, C. E.; Paas, J. E.

1978-01-01

The use of the performance baseline from the flight planning manual as a reference to measure changes in cruise fuel flow rates was discussed. For the CF6-6D engine, the introduction of design changes for performance and durability reasons was seen to introduce an average increment relative to this baseline of 3.2% WFM increase at Nl, 2.5% Fn increase at Nl, 0.8% specific fuel consumption (SFC) increase at Fn, and 7 C EGT increase at Nl, while maintaining sufficient SFC margin of the delivered airplane. The effect of revenue service deterioration and performance restoration relative to the reference was shown to be an adder on top of these design effects. A schematic of typical CF6-6D performance through revenue service and airline maintenance is presented in terms of percent cruise SFC relative to an airline datum point (average level upon entering revenue service). The typical changes in SFC margin are shown for airline revenue service through for installations and refurbishments.

CMOS-based carbon nanotube pass-transistor logic integrated circuits

PubMed Central

Ding, Li; Zhang, Zhiyong; Liang, Shibo; Pei, Tian; Wang, Sheng; Li, Yan; Zhou, Weiwei; Liu, Jie; Peng, Lian-Mao

2012-01-01

Field-effect transistors based on carbon nanotubes have been shown to be faster and less energy consuming than their silicon counterparts. However, ensuring these advantages are maintained for integrated circuits is a challenge. Here we demonstrate that a significant reduction in the use of field-effect transistors can be achieved by constructing carbon nanotube-based integrated circuits based on a pass-transistor logic configuration, rather than a complementary metal-oxide semiconductor configuration. Logic gates are constructed on individual carbon nanotubes via a doping-free approach and with a single power supply at voltages as low as 0.4 V. The pass-transistor logic configurarion provides a significant simplification of the carbon nanotube-based circuit design, a higher potential circuit speed and a significant reduction in power consumption. In particular, a full adder, which requires a total of 28 field-effect transistors to construct in the usual complementary metal-oxide semiconductor circuit, uses only three pairs of n- and p-field-effect transistors in the pass-transistor logic configuration. PMID:22334080

Highly Uniform Carbon Nanotube Field-Effect Transistors and Medium Scale Integrated Circuits.

PubMed

Chen, Bingyan; Zhang, Panpan; Ding, Li; Han, Jie; Qiu, Song; Li, Qingwen; Zhang, Zhiyong; Peng, Lian-Mao

2016-08-10

Top-gated p-type field-effect transistors (FETs) have been fabricated in batch based on carbon nanotube (CNT) network thin films prepared from CNT solution and present high yield and highly uniform performance with small threshold voltage distribution with standard deviation of 34 mV. According to the property of FETs, various logical and arithmetical gates, shifters, and d-latch circuits were designed and demonstrated with rail-to-rail output. In particular, a 4-bit adder consisting of 140 p-type CNT FETs was demonstrated with higher packing density and lower supply voltage than other published integrated circuits based on CNT films, which indicates that CNT based integrated circuits can reach to medium scale. In addition, a 2-bit multiplier has been realized for the first time. Benefitted from the high uniformity and suitable threshold voltage of CNT FETs, all of the fabricated circuits based on CNT FETs can be driven by a single voltage as small as 2 V.

Global and Local Translation Designs of Quantum Image Based on FRQI

NASA Astrophysics Data System (ADS)

Zhou, Ri-Gui; Tan, Canyun; Ian, Hou

2017-04-01

In this paper, two kinds of quantum image translation are designed based on FRQI, including global translation and local translation. Firstly, global translation is realized by employing adder modulo N, where all pixels in the image will be moved, and the circuit of right translation is designed. Meanwhile, left translation can also be implemented by using right translation. Complexity analysis shows that the circuits of global translation in this paper have lower complexity and cost less qubits. Secondly, local translation, consisted of single-column translation, multiple-columns translation and translation in the restricted area, is designed by adopting Gray code. In local translation, any parts of pixels in the image can be translated while other pixels remain unchanged. In order to lower complexity when the number of columns needing to be translated are more than one, multiple-columns translation is proposed, which has the approximate complexity with single-column translation. To perform multiple-columns translation, three conditions must be satisfied. In addition, all translations in this paper are cyclic.

Recent Advances in Photonic Devices for Optical Computing and the Role of Nonlinear Optics-Part II

NASA Technical Reports Server (NTRS)

Abdeldayem, Hossin; Frazier, Donald O.; Witherow, William K.; Banks, Curtis E.; Paley, Mark S.

2007-01-01

The twentieth century has been the era of semiconductor materials and electronic technology while this millennium is expected to be the age of photonic materials and all-optical technology. Optical technology has led to countless optical devices that have become indispensable in our daily lives in storage area networks, parallel processing, optical switches, all-optical data networks, holographic storage devices, and biometric devices at airports. This chapters intends to bring some awareness to the state-of-the-art of optical technologies, which have potential for optical computing and demonstrate the role of nonlinear optics in many of these components. Our intent, in this Chapter, is to present an overview of the current status of optical computing, and a brief evaluation of the recent advances and performance of the following key components necessary to build an optical computing system: all-optical logic gates, adders, optical processors, optical storage, holographic storage, optical interconnects, spatial light modulators and optical materials.

Large-area formation of self-aligned crystalline domains of organic semiconductors on transistor channels using CONNECT

PubMed Central

Park, Steve; Giri, Gaurav; Shaw, Leo; Pitner, Gregory; Ha, Jewook; Koo, Ja Hoon; Gu, Xiaodan; Park, Joonsuk; Lee, Tae Hoon; Nam, Ji Hyun; Hong, Yongtaek; Bao, Zhenan

2015-01-01

The electronic properties of solution-processable small-molecule organic semiconductors (OSCs) have rapidly improved in recent years, rendering them highly promising for various low-cost large-area electronic applications. However, practical applications of organic electronics require patterned and precisely registered OSC films within the transistor channel region with uniform electrical properties over a large area, a task that remains a significant challenge. Here, we present a technique termed “controlled OSC nucleation and extension for circuits” (CONNECT), which uses differential surface energy and solution shearing to simultaneously generate patterned and precisely registered OSC thin films within the channel region and with aligned crystalline domains, resulting in low device-to-device variability. We have fabricated transistor density as high as 840 dpi, with a yield of 99%. We have successfully built various logic gates and a 2-bit half-adder circuit, demonstrating the practical applicability of our technique for large-scale circuit fabrication. PMID:25902502

Evaluation of a gamma camera system for the RITS-6 accelerator using the self-magnetic pinch diode

NASA Astrophysics Data System (ADS)

Webb, Timothy J.; Kiefer, Mark L.; Gignac, Raymond; Baker, Stuart A.

2015-08-01

The self-magnetic pinch (SMP) diode is an intense radiographic source fielded on the Radiographic Integrated Test Stand (RITS-6) accelerator at Sandia National Laboratories in Albuquerque, NM. The accelerator is an inductive voltage adder (IVA) that can operate from 2-10 MV with currents up to 160 kA (at 7 MV). The SMP diode consists of an annular cathode separated from a flat anode, holding the bremsstrahlung conversion target, by a vacuum gap. Until recently the primary imaging diagnostic utilized image plates (storage phosphors) which has generally low DQE at these photon energies along with other problems. The benefits of using image plates include a high-dynamic range, good spatial resolution, and ease of use. A scintillator-based X-ray imaging system or "gamma camera" has been fielded in front of RITS and the SMP diode which has been able to provide vastly superior images in terms of signal-to-noise with similar resolution and acceptable dynamic range.

Area- and energy-efficient CORDIC accelerators in deep sub-micron CMOS technologies

NASA Astrophysics Data System (ADS)

Vishnoi, U.; Noll, T. G.

2012-09-01

The COordinate Rotate DIgital Computer (CORDIC) algorithm is a well known versatile approach and is widely applied in today's SoCs for especially but not restricted to digital communications. Dedicated CORDIC blocks can be implemented in deep sub-micron CMOS technologies at very low area and energy costs and are attractive to be used as hardware accelerators for Application Specific Instruction Processors (ASIPs). Thereby, overcoming the well known energy vs. flexibility conflict. Optimizing Global Navigation Satellite System (GNSS) receivers to reduce the hardware complexity is an important research topic at present. In such receivers CORDIC accelerators can be used for digital baseband processing (fixed-point) and in Position-Velocity-Time estimation (floating-point). A micro architecture well suited to such applications is presented. This architecture is parameterized according to the wordlengths as well as the number of iterations and can be easily extended for floating point data format. Moreover, area can be traded for throughput by partially or even fully unrolling the iterations, whereby the degree of pipelining is organized with one CORDIC iteration per cycle. From the architectural description, the macro layout can be generated fully automatically using an in-house datapath generator tool. Since the adders and shifters play an important role in optimizing the CORDIC block, they must be carefully optimized for high area and energy efficiency in the underlying technology. So, for this purpose carry-select adders and logarithmic shifters have been chosen. Device dimensioning was automatically optimized with respect to dynamic and static power, area and performance using the in-house tool. The fully sequential CORDIC block for fixed-point digital baseband processing features a wordlength of 16 bits, requires 5232 transistors, which is implemented in a 40-nm CMOS technology and occupies a silicon area of 1560 μm2 only. Maximum clock frequency from circuit simulation of extracted netlist is 768 MHz under typical, and 463 MHz under worst case technology and application corner conditions, respectively. Simulated dynamic power dissipation is 0.24 uW MHz-1 at 0.9 V; static power is 38 uW in slow corner, 65 uW in typical corner and 518 uW in fast corner, respectively. The latter can be reduced by 43% in a 40-nm CMOS technology using 0.5 V reverse-backbias. These features are compared with the results from different design styles as well as with an implementation in 28-nm CMOS technology. It is interesting that in the latter case area scales as expected, but worst case performance and energy do not scale well anymore.

Contribution of the backstreaming ions to the self-magnetic pinch (SMP) diode current

NASA Astrophysics Data System (ADS)

Mazarakis, Michael G.; Bennett, Nichelle; Cuneo, Michael E.; Fournier, Sean D.; Johnston, Mark D.; Kiefer, Mark L.; Leckbee, Joshua J.; Nielsen, Dan S.; Oliver, Bryan V.; Sceiford, Matthew E.; Simpson, Sean C.; Renk, Timothy J.; Ruiz, Carlos L.; Webb, Timothy J.; Ziska, Derek; Droemer, Darryl W.; Gignac, Raymond E.; Obregon, Robert J.; Wilkins, Frank L.; Welch, Dale R.

2018-04-01

The results presented here were obtained with a self-magnetic pinch (SMP) diode mounted at the front high voltage end of the RITS accelerator. RITS is a Self-Magnetically Insulated Transmission Line (MITL) voltage adder that adds the voltage pulse of six 1.3 MV inductively insulated cavities. The RITS driver together with the SMP diode has produced x-ray spots of the order of 1 mm in diameter and doses adequate for the radiographic imaging of high area density objects. Although, through the years, a number of different types of radiographic electron diodes have been utilized with SABER, HERMES III and RITS accelerators, the SMP diode appears to be the most successful and simplest diode for the radiographic investigation of various objects. Our experiments had two objectives: first to measure the contribution of the back-streaming ion currents emitted from the anode target and second to try to evaluate the energy of those ions and hence the Anode-Cathode (A-K) gap actual voltage. In any very high voltage inductive voltage adder utilizing MITLs to transmit the power to the diode load, the precise knowledge of the accelerating voltage applied on the A-K gap is problematic. This is even more difficult in an SMP diode where the A-K gap is very small (˜1 cm) and the diode region very hostile. The accelerating voltage quoted in the literature is from estimates based on the measurements of the anode and cathode currents of the MITL far upstream from the diode and utilizing the para-potential flow theories and inductive corrections. Thus, it would be interesting to have another independent measurement to evaluate the A-K voltage. The diode's anode is made of a number of high-Z metals in order to produce copious and energetic flash x-rays. It was established experimentally that the back-streaming ion currents are a strong function of the anode materials and their stage of cleanness. We have measured the back-streaming ion currents emitted from the anode and propagating through a hollow cathode tip for various diode configurations and different techniques of target cleaning treatment: namely, heating at very high temperatures with DC and pulsed current, with RF plasma cleaning, and with both plasma cleaning and heating. We have also evaluated the A-K gap voltage by energy filtering technique. Experimental results in comparison with LSP simulations are presented.

Star sensing for an earth imaging sensor

NASA Technical Reports Server (NTRS)

Ellis, Kenneth K. (Inventor); Griffith, Paul C. (Inventor)

2012-01-01

A star sensor includes (a) a scan mirror for scanning at least one star; (b) a detector array, coupled to the scan mirror, for detecting the one star; and (c) a processor, coupled to the detector array. The processor includes a first filter configured to reduce noise spikes in the detected one star, and provide a detection mask of filtered data. Also included is a second filter configured to reduce non-contiguous samples in the detection mask. A centroid calculator is included to determine a location of the one star, after the first and second filtering. The first filter includes a median filter, followed by an averaging filter, both configured to filter the one star in an along-scan direction of the scan mirror. The first filter includes another median filter, which is configured to filter the detected one star in the cross-scan direction of the scan mirror. An adder is included to subtract (a) output data from the other median filter from (b) output data from the averaging filter and provide filtered star data to the second filter.

A new approach in dry technology for non-degrading optical and EUV mask cleaning

NASA Astrophysics Data System (ADS)

Varghese, Ivin; Smith, Ben; Balooch, Mehdi; Bowers, Chuck

2012-11-01

The Eco-Snow Systems group of RAVE N.P., Inc. has developed a new cleaning technique to target several of the advanced and next generation mask clean challenges. This new technique, especially when combined with Eco-Snow Systems cryogenic CO2 cleaning technology, provides several advantages over existing methods because it: 1) is solely based on dry technique without requiring additional complementary aggressive wet chemistries that degrade the mask, 2) operates at atmospheric pressure and therefore avoids expensive and complicated equipment associated with vacuum systems, 3) generates ultra-clean reactants eliminating possible byproduct adders, 4) can be applied locally for site specific cleaning without exposing the rest of the mask or can be used to clean the entire mask, 5) removes organic as well as inorganic particulates and film contaminations, and 6) complements current techniques utilized for cleaning of advanced masks such as reduced chemistry wet cleans. In this paper, we shall present examples demonstrating the capability of this new technique for removal of pellicle glue residues and for critical removal of carbon contamination on EUV masks.

Time-resolved magnetic spectrometer measurements of the SABRE positive polarity magnetically insulated transmission line voltage

DOE Office of Scientific and Technical Information (OSTI.GOV)

Menge, P.R.; Cuneo, M.E.; Hanson, D.L.

A magnetic spectrometer has been fielded on the coaxial magnetically insulated transmission line (MITL) of the SABRE ten-cavity inductive voltage adder operated in positive polarity (6 MV, 300 kA, 50 ns). Located 1 m upstream from an extraction ion diode, this diagnostic is capable of measuring the SABRE voltage pulse with a 2 ns resolution. Ions (protons and carbon) from either a flashover or plasma gun source are accelerated from the inner anode across the gap to the outer cathode and into a drift tube terminated by the magnetic spectrometer. The magnetically deflected ions are recorded on up to sixteenmore » PIN diodes (diameter = 1 mm, thickness = 35 {mu}). The voltage waveform is produced from the time-of-flight information. Results confirm previous observations of a vacuum wave precursor separated from the magnetically insulated wave. Verification of upstream precursor erosion techniques are possible with this instrument. Measurements of peak voltage show good agreement with other time-integrated voltage diagnostics. Comparisons with theoretical voltage predictions derived from a flow impedance model of MITL behavior will be presented.« less

Capacitor blocks for linear transformer driver stages.

PubMed

Kovalchuk, B M; Kharlov, A V; Kumpyak, E V; Smorudov, G V; Zherlitsyn, A A

2014-01-01

In the Linear Transformer Driver (LTD) technology, the low inductance energy storage components and switches are directly incorporated into the individual cavities (named stages) to generate a fast output voltage pulse, which is added along a vacuum coaxial line like in an inductive voltage adder. LTD stages with air insulation were recently developed, where air is used both as insulation in a primary side of the stages and as working gas in the LTD spark gap switches. A custom designed unit, referred to as a capacitor block, was developed for use as a main structural element of the transformer stages. The capacitor block incorporates two capacitors GA 35426 (40 nF, 100 kV) and multichannel multigap gas switch. Several modifications of the capacitor blocks were developed and tested on the life time and self breakdown probability. Blocks were tested both as separate units and in an assembly of capacitive module, consisting of five capacitor blocks. This paper presents detailed design of capacitor blocks, description of operation regimes, numerical simulation of electric field in the switches, and test results.

Design and implementation of the modified signed digit multiplication routine on a ternary optical computer.

PubMed

Xu, Qun; Wang, Xianchao; Xu, Chao

2017-06-01

Multiplication with traditional electronic computers is faced with a low calculating accuracy and a long computation time delay. To overcome these problems, the modified signed digit (MSD) multiplication routine is established based on the MSD system and the carry-free adder. Also, its parallel algorithm and optimization techniques are studied in detail. With the help of a ternary optical computer's characteristics, the structured data processor is designed especially for the multiplication routine. Several ternary optical operators are constructed to perform M transformations and summations in parallel, which has accelerated the iterative process of multiplication. In particular, the routine allocates data bits of the ternary optical processor based on digits of multiplication input, so the accuracy of the calculation results can always satisfy the users. Finally, the routine is verified by simulation experiments, and the results are in full compliance with the expectations. Compared with an electronic computer, the MSD multiplication routine is not only good at dealing with large-value data and high-precision arithmetic, but also maintains lower power consumption and fewer calculating delays.

Fast parallel molecular algorithms for DNA-based computation: solving the elliptic curve discrete logarithm problem over GF2.

PubMed

Li, Kenli; Zou, Shuting; Xv, Jin

2008-01-01

Elliptic curve cryptographic algorithms convert input data to unrecognizable encryption and the unrecognizable data back again into its original decrypted form. The security of this form of encryption hinges on the enormous difficulty that is required to solve the elliptic curve discrete logarithm problem (ECDLP), especially over GF(2(n)), n in Z+. This paper describes an effective method to find solutions to the ECDLP by means of a molecular computer. We propose that this research accomplishment would represent a breakthrough for applied biological computation and this paper demonstrates that in principle this is possible. Three DNA-based algorithms: a parallel adder, a parallel multiplier, and a parallel inverse over GF(2(n)) are described. The biological operation time of all of these algorithms is polynomial with respect to n. Considering this analysis, cryptography using a public key might be less secure. In this respect, a principal contribution of this paper is to provide enhanced evidence of the potential of molecular computing to tackle such ambitious computations.

Fast Parallel Molecular Algorithms for DNA-Based Computation: Solving the Elliptic Curve Discrete Logarithm Problem over GF(2n)

PubMed Central

Li, Kenli; Zou, Shuting; Xv, Jin

2008-01-01

Elliptic curve cryptographic algorithms convert input data to unrecognizable encryption and the unrecognizable data back again into its original decrypted form. The security of this form of encryption hinges on the enormous difficulty that is required to solve the elliptic curve discrete logarithm problem (ECDLP), especially over GF(2n), n ∈ Z+. This paper describes an effective method to find solutions to the ECDLP by means of a molecular computer. We propose that this research accomplishment would represent a breakthrough for applied biological computation and this paper demonstrates that in principle this is possible. Three DNA-based algorithms: a parallel adder, a parallel multiplier, and a parallel inverse over GF(2n) are described. The biological operation time of all of these algorithms is polynomial with respect to n. Considering this analysis, cryptography using a public key might be less secure. In this respect, a principal contribution of this paper is to provide enhanced evidence of the potential of molecular computing to tackle such ambitious computations. PMID:18431451

Reprogrammable logic in memristive crossbar for in-memory computing

NASA Astrophysics Data System (ADS)

Cheng, Long; Zhang, Mei-Yun; Li, Yi; Zhou, Ya-Xiong; Wang, Zhuo-Rui; Hu, Si-Yu; Long, Shi-Bing; Liu, Ming; Miao, Xiang-Shui

2017-12-01

Memristive stateful logic has emerged as a promising next-generation in-memory computing paradigm to address escalating computing-performance pressures in traditional von Neumann architecture. Here, we present a nonvolatile reprogrammable logic method that can process data between different rows and columns in a memristive crossbar array based on material implication (IMP) logic. Arbitrary Boolean logic can be executed with a reprogrammable cell containing four memristors in a crossbar array. In the fabricated Ti/HfO2/W memristive array, some fundamental functions, such as universal NAND logic and data transfer, were experimentally implemented. Moreover, using eight memristors in a 2  ×  4 array, a one-bit full adder was theoretically designed and verified by simulation to exhibit the feasibility of our method to accomplish complex computing tasks. In addition, some critical logic-related performances were further discussed, such as the flexibility of data processing, cascading problem and bit error rate. Such a method could be a step forward in developing IMP-based memristive nonvolatile logic for large-scale in-memory computing architecture.

Progress towards experimental realization of extreme-velocity flow-dominated magnetized plasmas

NASA Astrophysics Data System (ADS)

Weber, T. E.; Adams, C. S.; Welch, D. R.; Kagan, G.; Bean, I. A.; Henderson, B. R.; Klim, A. J.

2017-10-01

Interactions of flow-dominated plasmas with other plasmas, neutral gases, magnetic fields, solids etc., take place with sufficient velocity that kinetic energy dominates the dynamics of the interaction (as opposed to magnetic or thermal energy, which dominates in most laboratory plasma experiments). Building upon progress made by the Magnetized Shock Experiment (MSX) at LANL, we are developing the experimental and modeling capability to increase our ultimate attainable plasma velocities well in excess of 1000 km/s. Ongoing work includes designing new pulsed power switches, triggering, and inductive adder topologies; development of novel high-speed optical diagnostics; and exploration of new numerical techniques to specifically model the unique physics of translating/stagnating flow-dominated plasmas. Furthering our understanding of the physical mechanisms of energy conversion from kinetic to other forms, such as thermal energy, non-thermal tails/accelerated populations, enhanced magnetic fields, and radiation (both continuum and line), has wide-ranging significance in basic plasma science, astrophysics, and plasma technology applications such as inertial confinement fusion and intense radiation sources. This work is supported by the U.S. Department of Energy, National Nuclear Security Administration. LA-UR-17-25786.

A learnable parallel processing architecture towards unity of memory and computing

NASA Astrophysics Data System (ADS)

Li, H.; Gao, B.; Chen, Z.; Zhao, Y.; Huang, P.; Ye, H.; Liu, L.; Liu, X.; Kang, J.

2015-08-01

Developing energy-efficient parallel information processing systems beyond von Neumann architecture is a long-standing goal of modern information technologies. The widely used von Neumann computer architecture separates memory and computing units, which leads to energy-hungry data movement when computers work. In order to meet the need of efficient information processing for the data-driven applications such as big data and Internet of Things, an energy-efficient processing architecture beyond von Neumann is critical for the information society. Here we show a non-von Neumann architecture built of resistive switching (RS) devices named “iMemComp”, where memory and logic are unified with single-type devices. Leveraging nonvolatile nature and structural parallelism of crossbar RS arrays, we have equipped “iMemComp” with capabilities of computing in parallel and learning user-defined logic functions for large-scale information processing tasks. Such architecture eliminates the energy-hungry data movement in von Neumann computers. Compared with contemporary silicon technology, adder circuits based on “iMemComp” can improve the speed by 76.8% and the power dissipation by 60.3%, together with a 700 times aggressive reduction in the circuit area.

Three-Dimensional, Inkjet-Printed Organic Transistors and Integrated Circuits with 100% Yield, High Uniformity, and Long-Term Stability.

PubMed

Kwon, Jimin; Takeda, Yasunori; Fukuda, Kenjiro; Cho, Kilwon; Tokito, Shizuo; Jung, Sungjune

2016-11-22

In this paper, we demonstrate three-dimensional (3D) integrated circuits (ICs) based on a 3D complementary organic field-effect transistor (3D-COFET). The transistor-on-transistor structure was achieved by vertically stacking a p-type OFET over an n-type OFET with a shared gate joining the two transistors, effectively halving the footprint of printed transistors. All the functional layers including organic semiconductors, source/drain/gate electrodes, and interconnection paths were fully inkjet-printed except a parylene dielectric which was deposited by chemical vapor deposition. An array of printed 3D-COFETs and their inverter logic gates comprising over 100 transistors showed 100% yield, and the uniformity and long-term stability of the device were also investigated. A full-adder circuit, the most basic computing unit, has been successfully demonstrated using nine NAND gates based on the 3D structure. The present study fulfills the essential requirements for the fabrication of organic printed complex ICs (increased transistor density, 100% yield, high uniformity, and long-term stability), and the findings can be applied to realize more complex digital/analogue ICs and intelligent devices.

Design of efficient circularly symmetric two-dimensional variable digital FIR filters.

PubMed

Bindima, Thayyil; Elias, Elizabeth

2016-05-01

Circularly symmetric two-dimensional (2D) finite impulse response (FIR) filters find extensive use in image and medical applications, especially for isotropic filtering. Moreover, the design and implementation of 2D digital filters with variable fractional delay and variable magnitude responses without redesigning the filter has become a crucial topic of interest due to its significance in low-cost applications. Recently the design using fixed word length coefficients has gained importance due to the replacement of multipliers by shifters and adders, which reduces the hardware complexity. Among the various approaches to 2D design, transforming a one-dimensional (1D) filter to 2D by transformation, is reported to be an efficient technique. In this paper, 1D variable digital filters (VDFs) with tunable cut-off frequencies are designed using Farrow structure based interpolation approach, and the sub-filter coefficients in the Farrow structure are made multiplier-less using canonic signed digit (CSD) representation. The resulting performance degradation in the filters is overcome by using artificial bee colony (ABC) optimization. Finally, the optimized 1D VDFs are mapped to 2D using generalized McClellan transformation resulting in low complexity, circularly symmetric 2D VDFs with real-time tunability.

High precision computing with charge domain devices and a pseudo-spectral method therefor

NASA Technical Reports Server (NTRS)

Barhen, Jacob (Inventor); Toomarian, Nikzad (Inventor); Fijany, Amir (Inventor); Zak, Michail (Inventor)

1997-01-01

The present invention enhances the bit resolution of a CCD/CID MVM processor by storing each bit of each matrix element as a separate CCD charge packet. The bits of each input vector are separately multiplied by each bit of each matrix element in massive parallelism and the resulting products are combined appropriately to synthesize the correct product. In another aspect of the invention, such arrays are employed in a pseudo-spectral method of the invention, in which partial differential equations are solved by expressing each derivative analytically as matrices, and the state function is updated at each computation cycle by multiplying it by the matrices. The matrices are treated as synaptic arrays of a neural network and the state function vector elements are treated as neurons. In a further aspect of the invention, moving target detection is performed by driving the soliton equation with a vector of detector outputs. The neural architecture consists of two synaptic arrays corresponding to the two differential terms of the soliton-equation and an adder connected to the output thereof and to the output of the detector array to drive the soliton equation.

Design of efficient circularly symmetric two-dimensional variable digital FIR filters

PubMed Central

Bindima, Thayyil; Elias, Elizabeth

2016-01-01

Circularly symmetric two-dimensional (2D) finite impulse response (FIR) filters find extensive use in image and medical applications, especially for isotropic filtering. Moreover, the design and implementation of 2D digital filters with variable fractional delay and variable magnitude responses without redesigning the filter has become a crucial topic of interest due to its significance in low-cost applications. Recently the design using fixed word length coefficients has gained importance due to the replacement of multipliers by shifters and adders, which reduces the hardware complexity. Among the various approaches to 2D design, transforming a one-dimensional (1D) filter to 2D by transformation, is reported to be an efficient technique. In this paper, 1D variable digital filters (VDFs) with tunable cut-off frequencies are designed using Farrow structure based interpolation approach, and the sub-filter coefficients in the Farrow structure are made multiplier-less using canonic signed digit (CSD) representation. The resulting performance degradation in the filters is overcome by using artificial bee colony (ABC) optimization. Finally, the optimized 1D VDFs are mapped to 2D using generalized McClellan transformation resulting in low complexity, circularly symmetric 2D VDFs with real-time tunability. PMID:27222739

Programmable single-cell mammalian biocomputers.

PubMed

Ausländer, Simon; Ausländer, David; Müller, Marius; Wieland, Markus; Fussenegger, Martin

2012-07-05

Synthetic biology has advanced the design of standardized control devices that program cellular functions and metabolic activities in living organisms. Rational interconnection of these synthetic switches resulted in increasingly complex designer networks that execute input-triggered genetic instructions with precision, robustness and computational logic reminiscent of electronic circuits. Using trigger-controlled transcription factors, which independently control gene expression, and RNA-binding proteins that inhibit the translation of transcripts harbouring specific RNA target motifs, we have designed a set of synthetic transcription–translation control devices that could be rewired in a plug-and-play manner. Here we show that these combinatorial circuits integrated a two-molecule input and performed digital computations with NOT, AND, NAND and N-IMPLY expression logic in single mammalian cells. Functional interconnection of two N-IMPLY variants resulted in bitwise intracellular XOR operations, and a combinatorial arrangement of three logic gates enabled independent cells to perform programmable half-subtractor and half-adder calculations. Individual mammalian cells capable of executing basic molecular arithmetic functions isolated or coordinated to metabolic activities in a predictable, precise and robust manner may provide new treatment strategies and bio-electronic interfaces in future gene-based and cell-based therapies.

Universal computing by DNA origami robots in a living animal

PubMed Central

Levner, Daniel; Ittah, Shmulik; Abu-Horowitz, Almogit; Bachelet, Ido

2014-01-01

Biological systems are collections of discrete molecular objects that move around and collide with each other. Cells carry out elaborate processes by precisely controlling these collisions, but developing artificial machines that can interface with and control such interactions remains a significant challenge. DNA is a natural substrate for computing and has been used to implement a diverse set of mathematical problems1-3, logic circuits4-6 and robotics7-9. The molecule also naturally interfaces with living systems, and different forms of DNA-based biocomputing have previously been demonstrated10-13. Here we show that DNA origami14-16 can be used to fabricate nanoscale robots that are capable of dynamically interacting with each other17-18 in a living animal. The interactions generate logical outputs, which are relayed to switch molecular payloads on or off. As a proof-of-principle, we use the system to create architectures that emulate various logic gates (AND, OR, XOR, NAND, NOT, CNOT, and a half adder). Following an ex vivo prototyping phase, we successfully employed the DNA origami robots in living cockroaches (Blaberus discoidalis) to control a molecule that targets the cells of the animal. PMID:24705510

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pfeffer, H.; Saewert, G.

This paper reports on a 6 kV modulator built and installed at Fermilab to drive the electron gun anode for the Tevatron Electron Lens (TEL). The TEL was built with the intention of shifting the individual (anti)proton bunch tunes to even out the tune spread among all 36 bunches with the desire of improving Tevatron integrated luminosity. This modulator is essentially a 6 kV arbitrary waveform generator that enables the TEL to define the electron beam intensity on a bunch-by-bunch basis. A voltage waveform is constructed having a 7 μs duration that corresponds to the tune shift requirements of amore » 12-bunch (anti)proton beam pulse train. This waveform is played out for any one or all three bunch trains in the Tevatron. The programmed waveform voltages transition to different levels at time intervals corresponding to the 395 ns bunch spacing. In addition, complex voltage waveforms can be played out at a sustained rate of 143 kHz over the full 6 kV output range. This paper describes the novel design of the inductive adder topology employing five transformers. It describes the design aspects that minimize switching losses for this multi-kilovolt, high repetition rate and high duty factor application.« less

Epidemiological aspects of snake bites on a Liberian rubber plantation.

PubMed

Stahel, E

1980-12-01

During a one-year period 95 patients with a history of snake bite were admitted to the hospital of a Liberian rubber plantation. The population at risk included the field workers (tappers and slashers) with an incidence of 4.2 symptomatic snake bites per thousand per year. The incidence of symptomatic bites was 1.7 per thousand in the group of non-field employees and 0.4 per thousand per year in the group of non-employees. The temporary disability was between 3 and 5 days, and the loss of workings days due to snake bites was one day per 10,000 working days on the plantation. Among the 95 patients 27 did not show any symptoms of envenoming except occasional fang marks. 64 patients developed cytotoxic symptoms alone. In this group, the night adder (Causus maculatus) was the main responsible snake. 4 patients showed signs of systemic envenoming. Two were haematological and two were neurological in nature and caused by Bitis species and Naja species, respectively. No fatalities were noted. A definite maximum of snake bites was observed during October and November which corresponds to the transition from rainy to dry season.

A learnable parallel processing architecture towards unity of memory and computing.

PubMed

Li, H; Gao, B; Chen, Z; Zhao, Y; Huang, P; Ye, H; Liu, L; Liu, X; Kang, J

2015-08-14

Developing energy-efficient parallel information processing systems beyond von Neumann architecture is a long-standing goal of modern information technologies. The widely used von Neumann computer architecture separates memory and computing units, which leads to energy-hungry data movement when computers work. In order to meet the need of efficient information processing for the data-driven applications such as big data and Internet of Things, an energy-efficient processing architecture beyond von Neumann is critical for the information society. Here we show a non-von Neumann architecture built of resistive switching (RS) devices named "iMemComp", where memory and logic are unified with single-type devices. Leveraging nonvolatile nature and structural parallelism of crossbar RS arrays, we have equipped "iMemComp" with capabilities of computing in parallel and learning user-defined logic functions for large-scale information processing tasks. Such architecture eliminates the energy-hungry data movement in von Neumann computers. Compared with contemporary silicon technology, adder circuits based on "iMemComp" can improve the speed by 76.8% and the power dissipation by 60.3%, together with a 700 times aggressive reduction in the circuit area.

Design and implementation of low power clock gated 64-bit ALU on ultra scale FPGA

NASA Astrophysics Data System (ADS)

Gupta, Ashutosh; Murgai, Shruti; Gulati, Anmol; Kumar, Pradeep

2016-03-01

64-bit energy efficient Arithmetic and Logic Unit using negative latch based clock gating technique is designed in this paper. The 64-bit ALU is designed using multiplexer based full adder cell. We have designed a 64-bit ALU with a gated clock. We have used negative latch based circuit for generating gated clock. This gated clock is used to control the multiplexer based 64-bit ALU. The circuit has been synthesized on kintex FPGA through Xilinx ISE Design Suite 14.7 using 28 nm technology in Verilog HDL. The circuit has been simulated on Modelsim 10.3c. The design is verified using System Verilog on QuestaSim in UVM environment. We have achieved 74.07%, 92. 93% and 95.53% reduction in total clock power, 89.73%, 91.35% and 92.85% reduction in I/Os power, 67.14%, 62.84% and 74.34% reduction in dynamic power and 25.47%, 29.05% and 46.13% reduction in total supply power at 20 MHz, 200 MHz and 2 GHz frequency respectively. The power has been calculated using XPower Analyzer tool of Xilinx ISE Design Suite 14.3.

Multiple advanced logic gates made of DNA-Ag nanocluster and the application for intelligent detection of pathogenic bacterial genes.

PubMed

Lin, Xiaodong; Liu, Yaqing; Deng, Jiankang; Lyu, Yanlong; Qian, Pengcheng; Li, Yunfei; Wang, Shuo

2018-02-21

The integration of multiple DNA logic gates on a universal platform to implement advance logic functions is a critical challenge for DNA computing. Herein, a straightforward and powerful strategy in which a guanine-rich DNA sequence lighting up a silver nanocluster and fluorophore was developed to construct a library of logic gates on a simple DNA-templated silver nanoclusters (DNA-AgNCs) platform. This library included basic logic gates, YES, AND, OR, INHIBIT, and XOR, which were further integrated into complex logic circuits to implement diverse advanced arithmetic/non-arithmetic functions including half-adder, half-subtractor, multiplexer, and demultiplexer. Under UV irradiation, all the logic functions could be instantly visualized, confirming an excellent repeatability. The logic operations were entirely based on DNA hybridization in an enzyme-free and label-free condition, avoiding waste accumulation and reducing cost consumption. Interestingly, a DNA-AgNCs-based multiplexer was, for the first time, used as an intelligent biosensor to identify pathogenic genes, E. coli and S. aureus genes, with a high sensitivity. The investigation provides a prototype for the wireless integration of multiple devices on even the simplest single-strand DNA platform to perform diverse complex functions in a straightforward and cost-effective way.

A 6 kV arbitrary waveform generator for the Tevatron Electron Lens

DOE PAGES

Pfeffer, H.; Saewert, G.

2011-11-09

This paper reports on a 6 kV modulator built and installed at Fermilab to drive the electron gun anode for the Tevatron Electron Lens (TEL). The TEL was built with the intention of shifting the individual (anti)proton bunch tunes to even out the tune spread among all 36 bunches with the desire of improving Tevatron integrated luminosity. This modulator is essentially a 6 kV arbitrary waveform generator that enables the TEL to define the electron beam intensity on a bunch-by-bunch basis. A voltage waveform is constructed having a 7 μs duration that corresponds to the tune shift requirements of amore » 12-bunch (anti)proton beam pulse train. This waveform is played out for any one or all three bunch trains in the Tevatron. The programmed waveform voltages transition to different levels at time intervals corresponding to the 395 ns bunch spacing. In addition, complex voltage waveforms can be played out at a sustained rate of 143 kHz over the full 6 kV output range. This paper describes the novel design of the inductive adder topology employing five transformers. It describes the design aspects that minimize switching losses for this multi-kilovolt, high repetition rate and high duty factor application.« less

A compact physical model for the simulation of pNML-based architectures

NASA Astrophysics Data System (ADS)

Turvani, G.; Riente, F.; Plozner, E.; Schmitt-Landsiedel, D.; Breitkreutz-v. Gamm, S.

2017-05-01

Among emerging technologies, perpendicular Nanomagnetic Logic (pNML) seems to be very promising because of its capability of combining logic and memory onto the same device, scalability, 3D-integration and low power consumption. Recently, Full Adder (FA) structures clocked by a global magnetic field have been experimentally demonstrated and detailed characterizations of the switching process governing the domain wall (DW) nucleation probability Pnuc and time tnuc have been performed. However, the design of pNML architectures represent a crucial point in the study of this technology; this can have a remarkable impact on the reliability of pNML structures. Here, we present a compact model developed in VHDL which enables to simulate complex pNML architectures while keeping into account critical physical parameters. Therefore, such parameters have been extracted from the experiments, fitted by the corresponding physical equations and encapsulated into the proposed model. Within this, magnetic structures are decomposed into a few basic elements (nucleation centers, nanowires, inverters etc.) represented by the according physical description. To validate the model, we redesigned a FA and compared our simulation results to the experiment. With this compact model of pNML devices we have envisioned a new methodology which makes it possible to simulate and test the physical behavior of complex architectures with very low computational costs.

A Low Power and High Throughput Self Synchronous FPGA Using 65nm CMOS with Throughput Optimization by Pipeline Alignment

NASA Astrophysics Data System (ADS)

Stefan Devlin, Benjamin; Nakura, Toru; Ikeda, Makoto; Asada, Kunihiro

We detail a self synchronous field programmable gate array (SSFPGA) with dual-pipeline (DP) architecture to conceal pre-charge time for dynamic logic, and its throughput optimization by using pipeline alignment implemented on benchmark circuits. A self synchronous LUT (SSLUT) consists of a three input tree-type structure with 8bits of SRAM for programming. A self synchronous switch box (SSSB) consists of both pass transistors and buffers to route signals, with 12bits of SRAM. One common block with one SSLUT and one SSSB occupies 2.2Mλ2 area with 35bits of SRAM, and the prototype SSFPGA with 34 × 30 (1020) blocks is designed and fabricated using 65nm CMOS. Measured results show at 1.2V 430MHz and 647MHz operation for a 3bit ripple carry adder, without and with throughput optimization, respectively. We find that using the proposed pipeline alignment techniques we can perform at maximum throughput of 647MHz in various benchmarks on the SSFPGA. We demonstrate up to 56.1 times throughput improvement with our pipeline alignment techniques. The pipeline alignment is carried out within the number of logic elements in the array and pipeline buffers in the switching matrix.

Investigation of a novel common subexpression elimination method for low power and area efficient DCT architecture.

PubMed

Siddiqui, M F; Reza, A W; Kanesan, J; Ramiah, H

2014-01-01

A wide interest has been observed to find a low power and area efficient hardware design of discrete cosine transform (DCT) algorithm. This research work proposed a novel Common Subexpression Elimination (CSE) based pipelined architecture for DCT, aimed at reproducing the cost metrics of power and area while maintaining high speed and accuracy in DCT applications. The proposed design combines the techniques of Canonical Signed Digit (CSD) representation and CSE to implement the multiplier-less method for fixed constant multiplication of DCT coefficients. Furthermore, symmetry in the DCT coefficient matrix is used with CSE to further decrease the number of arithmetic operations. This architecture needs a single-port memory to feed the inputs instead of multiport memory, which leads to reduction of the hardware cost and area. From the analysis of experimental results and performance comparisons, it is observed that the proposed scheme uses minimum logic utilizing mere 340 slices and 22 adders. Moreover, this design meets the real time constraints of different video/image coders and peak-signal-to-noise-ratio (PSNR) requirements. Furthermore, the proposed technique has significant advantages over recent well-known methods along with accuracy in terms of power reduction, silicon area usage, and maximum operating frequency by 41%, 15%, and 15%, respectively.

Plasmonic integrated circuits comprising metal waveguides, multiplexer/demultiplexer, detectors, and logic circuits on a silicon substrate

NASA Astrophysics Data System (ADS)

Fukuda, M.; Ota, M.; Sumimura, A.; Okahisa, S.; Ito, M.; Ishii, Y.; Ishiyama, T.

2017-05-01

A plasmonic integrated circuit configuration comprising plasmonic and electronic components is presented and the feasibility for high-speed signal processing applications is discussed. In integrated circuits, plasmonic signals transmit data at high transfer rates with light velocity. Plasmonic and electronic components such as wavelength-divisionmultiplexing (WDM) networks comprising metal wires, plasmonic multiplexers/demultiplexers, and crossing metal wires are connected via plasmonic waveguides on the nanometer or micrometer scales. To merge plasmonic and electronic components, several types of plasmonic components were developed. To ensure that the plasmonic components could be easily fabricated and monolithically integrated onto a silicon substrate using silicon complementary metal-oxide-semiconductor (CMOS)-compatible processes, the components were fabricated on a Si substrate and made from silicon, silicon oxides, and metal; no other materials were used in the fabrication. The plasmonic components operated in the 1300- and 1550-nm-wavelength bands, which are typically employed in optical fiber communication systems. The plasmonic logic circuits were formed by patterning a silicon oxide film on a metal film, and the operation as a half adder was confirmed. The computed plasmonic signals can propagate through the plasmonic WDM networks and be connected to electronic integrated circuits at high data-transfer rates.

In-Situ Anode Heating and Its Effects on Atomic Constituents in the A-K Gap in Self-Magnetic Pinch (SMP) Experiments

NASA Astrophysics Data System (ADS)

Simpson, Sean; Renk, Timothy; Johnston, Mark; Mazarakis, Mike; Patel, Sonal

2015-11-01

The RITS-6 inductive voltage adder (IVA) accelerator (3.5-8.5 MeV) at Sandia National Laboratories produces high-power (TW) focused electron beams (<3mm diameter) for flash x-ray radiography applications. The Self-Magnetic Pinch (SMP) diode utilizes a hollowed metal cathode to produce a pinched focus onto a high-Z metal anode converter. There is not a clear understanding as to the effects various contaminants such as C, CO, H, H2O, HmCn, O2, and N2, on the anode surface or in the bulk may have on impedance dynamics, beam stability, beam spot size, and reproducibility. Heating pure Ta anodes with and without a thin Al coating have been investigated using temperatures ranging from 400 °C to 1000 °C. Initial experiments indicate a significant reduction in H and C as seen in high-speed spectral analysis of plasmas at the converter and a reduction in the back-streaming proton current. Experiments are ongoing, and latest results will be reported. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

Traditional healing with animals (zootherapy): medieval to present-day Levantine practice.

PubMed

Lev, Efraim

2003-03-01

Animals and products derived from different organs of their bodies have constituted part of the inventory of medicinal substances used in various cultures since ancient times. This article reviews the history of healing with animals in the Levant (the Land of Israel and parts of present-day Syria, Lebanon, and Jordan, defined by the Muslims in the Middle Ages as Bilad al-Sham) throughout history. Intensive research into the phenomenon of zootherapy in the Levant from early medieval to present-day traditional medicine yielded 99 substances of animal origin which were used medicinally during that long period. Fifty-two animal extracts and products were documented as being used from the early Muslim period (10th century) to the late Ottoman period (19th century). Seventy-seven were recorded as being used in the 20th century. Seven main animal sources have been exploited for medical uses throughout history: honey, wax, adder, beaver testicles, musk oil, coral, and ambergris. The first three are local and relatively easy to obtain; the last four are exotic, therefore, rare and expensive. The use of other materials of animal origin came to an end in the course of history because of change in the moral outlook of modern societies. Among the latter we note mummy, silkworm, stinkbug, scarabees, snail, scorpion, and triton.

Investigation of a Novel Common Subexpression Elimination Method for Low Power and Area Efficient DCT Architecture

PubMed Central

Siddiqui, M. F.; Reza, A. W.; Kanesan, J.; Ramiah, H.

2014-01-01

A wide interest has been observed to find a low power and area efficient hardware design of discrete cosine transform (DCT) algorithm. This research work proposed a novel Common Subexpression Elimination (CSE) based pipelined architecture for DCT, aimed at reproducing the cost metrics of power and area while maintaining high speed and accuracy in DCT applications. The proposed design combines the techniques of Canonical Signed Digit (CSD) representation and CSE to implement the multiplier-less method for fixed constant multiplication of DCT coefficients. Furthermore, symmetry in the DCT coefficient matrix is used with CSE to further decrease the number of arithmetic operations. This architecture needs a single-port memory to feed the inputs instead of multiport memory, which leads to reduction of the hardware cost and area. From the analysis of experimental results and performance comparisons, it is observed that the proposed scheme uses minimum logic utilizing mere 340 slices and 22 adders. Moreover, this design meets the real time constraints of different video/image coders and peak-signal-to-noise-ratio (PSNR) requirements. Furthermore, the proposed technique has significant advantages over recent well-known methods along with accuracy in terms of power reduction, silicon area usage, and maximum operating frequency by 41%, 15%, and 15%, respectively. PMID:25133249

Chip-integrated ultrawide-band all-optical logic comparator in plasmonic circuits

PubMed Central

Lu, Cuicui; Hu, Xiaoyong; Yang, Hong; Gong, Qihuang

2014-01-01

Optical computing opens up the possibility for the realization of ultrahigh-speed and ultrawide-band information processing. Integrated all-optical logic comparator is one of the indispensable core components of optical computing systems. Unfortunately, up to now, no any nanoscale all-optical logic comparator suitable for on-chip integration applications has been realized experimentally. Here, we report a subtle and effective technical solution to circumvent the obstacles of inherent Ohmic losses of metal and limited propagation length of SPPs. A nanoscale all-optical logic comparator suitable for on-chip integration applications is realized in plasmonic circuits directly. The incident single-bit (or dual-bit) logic signals can be compared and the comparison results are endowed with different logic encodings. An ultrabroad operating wavelength range from 700 to 1000 nm, and an ultrahigh output logic-state contrast-ratio of more than 25 dB are realized experimentally. No high power requirement is needed. Though nanoscale SPP light source and the logic comparator device are integrated into the same plasmonic chip, an ultrasmall feature size is maintained. This work not only paves a way for the realization of complex logic device such as adders and multiplier, but also opens up the possibility for realizing quantum solid chips based on plasmonic circuits. PMID:24463956

Chip-integrated ultrawide-band all-optical logic comparator in plasmonic circuits.

PubMed

Lu, Cuicui; Hu, Xiaoyong; Yang, Hong; Gong, Qihuang

2014-01-27

Optical computing opens up the possibility for the realization of ultrahigh-speed and ultrawide-band information processing. Integrated all-optical logic comparator is one of the indispensable core components of optical computing systems. Unfortunately, up to now, no any nanoscale all-optical logic comparator suitable for on-chip integration applications has been realized experimentally. Here, we report a subtle and effective technical solution to circumvent the obstacles of inherent Ohmic losses of metal and limited propagation length of SPPs. A nanoscale all-optical logic comparator suitable for on-chip integration applications is realized in plasmonic circuits directly. The incident single-bit (or dual-bit) logic signals can be compared and the comparison results are endowed with different logic encodings. An ultrabroad operating wavelength range from 700 to 1000 nm, and an ultrahigh output logic-state contrast-ratio of more than 25 dB are realized experimentally. No high power requirement is needed. Though nanoscale SPP light source and the logic comparator device are integrated into the same plasmonic chip, an ultrasmall feature size is maintained. This work not only paves a way for the realization of complex logic device such as adders and multiplier, but also opens up the possibility for realizing quantum solid chips based on plasmonic circuits.

Influence of climate on the presence of colour polymorphism in two montane reptile species

PubMed Central

Broennimann, Olivier; Ursenbacher, Sylvain; Meyer, Andreas; Golay, Philippe; Monney, Jean-Claude; Schmocker, Hans; Guisan, Antoine; Dubey, Sylvain

2014-01-01

The coloration of ectotherms plays an important role in thermoregulation processes. Dark individuals should heat up faster and be able to reach a higher body temperature than light individuals and should therefore have benefits in cool areas. In central Europe, montane local populations of adder (Vipera berus) and asp viper (Vipera aspis) exhibit a varying proportion of melanistic individuals. We tested whether the presence of melanistic V. aspis and V. berus could be explained by climatic conditions. We measured the climatic niche position and breadth of monomorphic (including strictly patterned individuals) and polymorphic local populations, calculated their niche overlap and tested for niche equivalency and similarity. In accordance with expectations, niche overlap between polymorphic local populations of both species is high, and even higher than that of polymorphic versus monomorphic montane local populations of V. aspis, suggesting a predominant role of melanism in determining the niche of ectothermic vertebrates. However, unexpectedly, the niche of polymorphic local populations of both species is narrower than that of monomorphic ones, indicating that colour polymorphism does not always enable the exploitation of a greater variability of resources, at least at the intraspecific level. Overall, our results suggest that melanism might be present only when the thermoregulatory benefit is higher than the cost of predation. PMID:25392313

Reconfigurable logic in nanosecond Cu/GeTe/TiN filamentary memristors for energy-efficient in-memory computing.

PubMed

Jin, Miaomiao; Cheng, Long; Li, Yi; Hu, Siyu; Lu, Ke; Chen, Jia; Duan, Nian; Wang, Zhuorui; Zhou, Yaxiong; Chang, Ting-Chang; Miao, Xiangshui

2018-06-27

Owing to the capability of integrating the information storage and computing in the same physical location, in-memory computing with memristors has become a research hotspot as a promising route for non von Neumann architecture. However, it is still a challenge to develop high performance devices as well as optimized logic methodologies to realize energy-efficient computing. Herein, filamentary Cu/GeTe/TiN memristor is reported to show satisfactory properties with nanosecond switching speed (< 60 ns), low voltage operation (< 2 V), high endurance (>104 cycles) and good retention (>104 s @85℃). It is revealed that the charge carrier conduction mechanisms in high resistance and low resistance states are Schottky emission and hopping transport between the adjacent Cu clusters, respectively, based on the analysis of current-voltage behaviors and resistance-temperature characteristics. An intuitive picture is given to describe the dynamic processes of resistive switching. Moreover, based on the basic material implication (IMP) logic circuit, we proposed a reconfigurable logic method and experimentally implemented IMP, NOT, OR, and COPY logic functions. Design of a one-bit full adder with reduction in computational sequences and its validation in simulation further demonstrate the potential practical application. The results provide important progress towards understanding of resistive switching mechanism and realization of energy-efficient in-memory computing architecture. © 2018 IOP Publishing Ltd.

PIC simulation of the vacuum power flow for a 5 terawatt, 5 MV, 1 MA pulsed power system

NASA Astrophysics Data System (ADS)

Liu, Laqun; Zou, Wenkang; Liu, Dagang; Guo, Fan; Wang, Huihui; Chen, Lin

2018-03-01

In this paper, a 5 Terawatt, 5 MV, 1 MA pulsed power system based on vacuum magnetic insulation is simulated by the particle-in-cell (PIC) simulation method. The system consists of 50 100-kV linear transformer drive (LTD) cavities in series, using magnetically insulated induction voltage adder (MIVA) technology for pulsed power addition and transmission. The pulsed power formation and the vacuum power flow are simulated when the system works in self-limited flow and load-limited flow. When the pulsed power system isn't connected to the load, the downstream magnetically insulated transmission line (MITL) works in the self-limited flow, the maximum of output current is 1.14 MA and the amplitude of voltage is 4.63 MV. The ratio of the electron current to the total current is 67.5%, when the output current reached the peak value. When the impedance of the load is 3.0 Ω, the downstream MITL works in the self-limited flow, the maximums of output current and the amplitude of voltage are 1.28 MA and 3.96 MV, and the ratio of the electron current to the total current is 11.7% when the output current reached the peak value. In addition, when the switches are triggered in synchronism with the passage of the pulse power flow, it effectively reduces the rise time of the pulse current.

Influence of climate on the presence of colour polymorphism in two montane reptile species.

PubMed

Broennimann, Olivier; Ursenbacher, Sylvain; Meyer, Andreas; Golay, Philippe; Monney, Jean-Claude; Schmocker, Hans; Guisan, Antoine; Dubey, Sylvain

2014-11-01

The coloration of ectotherms plays an important role in thermoregulation processes. Dark individuals should heat up faster and be able to reach a higher body temperature than light individuals and should therefore have benefits in cool areas. In central Europe, montane local populations of adder (Vipera berus) and asp viper (Vipera aspis) exhibit a varying proportion of melanistic individuals. We tested whether the presence of melanistic V. aspis and V. berus could be explained by climatic conditions. We measured the climatic niche position and breadth of monomorphic (including strictly patterned individuals) and polymorphic local populations, calculated their niche overlap and tested for niche equivalency and similarity. In accordance with expectations, niche overlap between polymorphic local populations of both species is high, and even higher than that of polymorphic versus monomorphic montane local populations of V. aspis, suggesting a predominant role of melanism in determining the niche of ectothermic vertebrates. However, unexpectedly, the niche of polymorphic local populations of both species is narrower than that of monomorphic ones, indicating that colour polymorphism does not always enable the exploitation of a greater variability of resources, at least at the intraspecific level. Overall, our results suggest that melanism might be present only when the thermoregulatory benefit is higher than the cost of predation. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

A design method for high performance seismic data acquisition based on oversampling delta-sigma modulation

NASA Astrophysics Data System (ADS)

Gao, Shanghua; Xue, Bing

2017-04-01

The dynamic range of the currently most widely used 24-bit seismic data acquisition devices is 10-20 dB lower than that of broadband seismometers, and this can affect the completeness of seismic waveform recordings under certain conditions. However, this problem is not easy to solve because of the lack of analog to digital converter (ADC) chips with more than 24 bits in the market. So the key difficulties for higher-resolution data acquisition devices lie in achieving more than 24-bit ADC circuit. In the paper, we propose a method in which an adder, an integrator, a digital to analog converter chip, a field-programmable gate array, and an existing low-resolution ADC chip are used to build a third-order 16-bit oversampling delta-sigma modulator. This modulator is equipped with a digital decimation filter, thus forming a complete analog to digital converting circuit. Experimental results show that, within the 0.1-40 Hz frequency range, the circuit board's dynamic range reaches 158.2 dB, its resolution reaches 25.99 dB, and its linearity error is below 2.5 ppm, which is better than what is achieved by the commercial 24-bit ADC chips ADS1281 and CS5371. This demonstrates that the proposed method may alleviate or even solve the amplitude-limitation problem that broadband observation systems so commonly have to face during strong earthquakes.

Area and power efficient DCT architecture for image compression

NASA Astrophysics Data System (ADS)

Dhandapani, Vaithiyanathan; Ramachandran, Seshasayanan

2014-12-01

The discrete cosine transform (DCT) is one of the major components in image and video compression systems. The final output of these systems is interpreted by the human visual system (HVS), which is not perfect. The limited perception of human visualization allows the algorithm to be numerically approximate rather than exact. In this paper, we propose a new matrix for discrete cosine transform. The proposed 8 × 8 transformation matrix contains only zeros and ones which requires only adders, thus avoiding the need for multiplication and shift operations. The new class of transform requires only 12 additions, which highly reduces the computational complexity and achieves a performance in image compression that is comparable to that of the existing approximated DCT. Another important aspect of the proposed transform is that it provides an efficient area and power optimization while implementing in hardware. To ensure the versatility of the proposal and to further evaluate the performance and correctness of the structure in terms of speed, area, and power consumption, the model is implemented on Xilinx Virtex 7 field programmable gate array (FPGA) device and synthesized with Cadence® RTL Compiler® using UMC 90 nm standard cell library. The analysis obtained from the implementation indicates that the proposed structure is superior to the existing approximation techniques with a 30% reduction in power and 12% reduction in area.

Hybrid VLSI/QCA Architecture for Computing FFTs

NASA Technical Reports Server (NTRS)

Fijany, Amir; Toomarian, Nikzad; Modarres, Katayoon; Spotnitz, Matthew

2003-01-01

A data-processor architecture that would incorporate elements of both conventional very-large-scale integrated (VLSI) circuitry and quantum-dot cellular automata (QCA) has been proposed to enable the highly parallel and systolic computation of fast Fourier transforms (FFTs). The proposed circuit would complement the QCA-based circuits described in several prior NASA Tech Briefs articles, namely Implementing Permutation Matrices by Use of Quantum Dots (NPO-20801), Vol. 25, No. 10 (October 2001), page 42; Compact Interconnection Networks Based on Quantum Dots (NPO-20855) Vol. 27, No. 1 (January 2003), page 32; and Bit-Serial Adder Based on Quantum Dots (NPO-20869), Vol. 27, No. 1 (January 2003), page 35. The cited prior articles described the limitations of very-large-scale integrated (VLSI) circuitry and the major potential advantage afforded by QCA. To recapitulate: In a VLSI circuit, signal paths that are required not to interact with each other must not cross in the same plane. In contrast, for reasons too complex to describe in the limited space available for this article, suitably designed and operated QCAbased signal paths that are required not to interact with each other can nevertheless be allowed to cross each other in the same plane without adverse effect. In principle, this characteristic could be exploited to design compact, coplanar, simple (relative to VLSI) QCA-based networks to implement complex, advanced interconnection schemes.

Hermes 3

NASA Astrophysics Data System (ADS)

Hasti, D. E.; Ramirez, J. J.; Prestwich, K. R.; Sanford, T. W. L.; Hamil, R. A.

Hermes 3 is a major new gamma-ray simulator that is part of the Simulation Technology Laboratory Project. This accelerator will significantly improve the capability to evaluate the effects of gamma-ray radiation from nuclear weapons on weapons subsystems. This accelerator will be designed to produce 10(5)R, 5 x 10 to the 12th power R/S and 2 x 10 to the 20th power R/S(2) over a 500 sq cm area. The radiation dose will vary less than a factor of two over this area and less than a factor of four throughout a volume found by extending this surface 15 cm further from the gamma-ray converter. The minimum dose in this volume will be greater than or equal to 5 x 10 to the 4th power R. The accelerator will be designed with sufficient reliability and short enough turn-around time to produce more than 600 radiation pulses per year. In Hermes 3 the peak power in the beam is to be increased from 1.2 TW of Hermes 2 to 16 TW. Two techniques for achieving these high powers have been successfully developed. The first technique is a high current linear induction accelerator with several parallel beams. Experiments to evaluate this concept were done on the MABE accelerator. The second concept uses induction cavities and a magnetically insulated transmission line (MITL) to form a multi-terawatt voltage adder.

Qualification of local advanced cryogenic cleaning technology for 14nm photomask fabrication

NASA Astrophysics Data System (ADS)

Taumer, Ralf; Krome, Thorsten; Bowers, Chuck; Varghese, Ivin; Hopkins, Tyler; White, Roy; Brunner, Martin; Yi, Daniel

2014-10-01

The march toward tighter design rules, and thus smaller defects, implies stronger surface adhesion between defects and the photomask surface compared to past generations, thereby resulting in increased difficulty in photomask cleaning. Current state-of-the-art wet clean technologies utilize functional water and various energies in an attempt to produce similar yield to the acid cleans of previous generations, but without some of the negative side effects. Still, wet cleans have continued to be plagued with issues such as persistent particles and contaminations, SRAF and feature damages, leaving contaminants behind that accelerate photo-induced defect growth, and others. This paper details work done through a design of experiments (DOE) utilized to qualify an improved cryogenic cleaning technology for production in the Advanced Mask Technology Center (AMTC) advanced production lines for 20 and 14 nm processing. All work was conducted at the AMTC facility in Dresden, Germany utilizing technology developed by Eco-Snow Systems and RAVE LLC for their cryogenic local cleaning VC1200F platform. This system uses a newly designed nozzle, improved gaseous CO2 delivery, extensive filtration to remove hydrocarbons and minimize particle adders, and other process improvements to overcome the limitations of the previous generation local cleaning tool. AMTC has successfully qualified this cryogenic cleaning technology and is currently using it regularly to enhance production yields even at the most challenging technology nodes.

High-Performance Complementary Transistors and Medium-Scale Integrated Circuits Based on Carbon Nanotube Thin Films.

PubMed

Yang, Yingjun; Ding, Li; Han, Jie; Zhang, Zhiyong; Peng, Lian-Mao

2017-04-25

Solution-derived carbon nanotube (CNT) network films with high semiconducting purity are suitable materials for the wafer-scale fabrication of field-effect transistors (FETs) and integrated circuits (ICs). However, it is challenging to realize high-performance complementary metal-oxide semiconductor (CMOS) FETs with high yield and stability on such CNT network films, and this difficulty hinders the development of CNT-film-based ICs. In this work, we developed a doping-free process for the fabrication of CMOS FETs based on solution-processed CNT network films, in which the polarity of the FETs was controlled using Sc or Pd as the source/drain contacts to selectively inject carriers into the channels. The fabricated top-gated CMOS FETs showed high symmetry between the characteristics of n- and p-type devices and exhibited high-performance uniformity and excellent scalability down to a gate length of 1 μm. Many common types of CMOS ICs, including typical logic gates, sequential circuits, and arithmetic units, were constructed based on CNT films, and the fabricated ICs exhibited rail-to-rail outputs because of the high noise margin of CMOS circuits. In particular, 4-bit full adders consisting of 132 CMOS FETs were realized with 100% yield, thereby demonstrating that this CMOS technology shows the potential to advance the development of medium-scale CNT-network-film-based ICs.

Quantum cellular automata

NASA Astrophysics Data System (ADS)

Porod, Wolfgang; Lent, Craig S.; Bernstein, Gary H.

1994-06-01

The Notre Dame group has developed a new paradigm for ultra-dense and ultra-fast information processing in nanoelectronic systems. These Quantum Cellular Automata (QCA's) are the first concrete proposal for a technology based on arrays of coupled quantum dots. The basic building block of these cellular arrays is the Notre Dame Logic Cell, as it has been called in the literature. The phenomenon of Coulomb exclusion, which is a synergistic interplay of quantum confinement and Coulomb interaction, leads to a bistable behavior of each cell which makes possible their use in large-scale cellular arrays. The physical interaction between neighboring cells has been exploited to implement logic functions. New functionality may be achieved in this fashion, and the Notre Dame group invented a versatile majority logic gate. In a series of papers, the feasibility of QCA wires, wire crossing, inverters, and Boolean logic gates was demonstrated. A major finding is that all logic functions may be integrated in a hierarchial fashion which allows the design of complicated QCA structures. The most complicated system which was simulated to date is a one-bit full adder consisting of some 200 cells. In addition to exploring these new concepts, efforts are under way to physically realize such structures both in semiconductor and metal systems. Extensive modeling work of semiconductor quantum dot structures has helped identify optimum design parameters for QCA experimental implementations.

Identification of cDNAs encoding viper venom hyaluronidases: cross-generic sequence conservation of full-length and unusually short variant transcripts.

PubMed

Harrison, Robert A; Ibison, Frances; Wilbraham, Davina; Wagstaff, Simon C

2007-05-01

The immobilisation of prey by snakes is most efficiently achieved by the rapid dissemination of venom from its site of injection into the blood stream. Hyaluronidase is a common component of snake venoms and has been termed the "venom spreading factor". In the absence of nucleotide or protein sequence data to confirm the functional identity of this venom component, we interrogated a venom gland EST database for the saw-scaled viper, Echis ocellatus (Nigeria), using the gene ontology (GO) term "carbohydrate metabolism". A single hyalurononglucosaminadase-activity matching sequence (EOC00242) was found and used to design PCR primers to acquire the full-length cDNA sequence. Although very different from the bee venom and mammalian hyaluronidase sequences, the E. ocellatus sequence retained all the catalytic, positional and structural residues that characterise this class of carbohydrate metabolising hydrolases. An extraordinarily high level of sequence identity (>95%) was observed in analogous venom gland cDNA sequences isolated (by PCR) from another saw-scaled viper species, E. pyramidum leakeyi (Kenya), and from the sahara horned viper, Cerastes cerastes cerastes (Egypt) and the puff adder, Bitis arietans (Nigeria). Smaller amplicons, lacking hyaluronidase catalytic residues because of 768 bp or 855 bp central deletions, appear to encode either truncated peptides without hyaluronidase activity, or are non-translated transcripts because they lack consensus translation initiating motifs.

Parallelizing quantum circuit synthesis

NASA Astrophysics Data System (ADS)

Di Matteo, Olivia; Mosca, Michele

2016-03-01

Quantum circuit synthesis is the process in which an arbitrary unitary operation is decomposed into a sequence of gates from a universal set, typically one which a quantum computer can implement both efficiently and fault-tolerantly. As physical implementations of quantum computers improve, the need is growing for tools that can effectively synthesize components of the circuits and algorithms they will run. Existing algorithms for exact, multi-qubit circuit synthesis scale exponentially in the number of qubits and circuit depth, leaving synthesis intractable for circuits on more than a handful of qubits. Even modest improvements in circuit synthesis procedures may lead to significant advances, pushing forward the boundaries of not only the size of solvable circuit synthesis problems, but also in what can be realized physically as a result of having more efficient circuits. We present a method for quantum circuit synthesis using deterministic walks. Also termed pseudorandom walks, these are walks in which once a starting point is chosen, its path is completely determined. We apply our method to construct a parallel framework for circuit synthesis, and implement one such version performing optimal T-count synthesis over the Clifford+T gate set. We use our software to present examples where parallelization offers a significant speedup on the runtime, as well as directly confirm that the 4-qubit 1-bit full adder has optimal T-count 7 and T-depth 3.

Impedance Dynamics in the Self-Magnetic Pinch (SMP) Diode on the RITS-6 Accelerator

NASA Astrophysics Data System (ADS)

Renk, Timothy; Johnston, Mark; Leckbee, Joshua; Webb, Timothy; Mazarakis, Michael; Kiefer, Mark; Bennett, Nichelle

2014-10-01

The RITS-6 inductive voltage adder (IVA) accelerator (3.5-8.5 MeV) at Sandia National Laboratories produces high-power (TW) focused electron beams (<3 mm diameter) for flash x-ray radiography applications. The Self-Magnetic Pinch (SMP) diode utilizes a hollowed metal cathode to produce a pinched focus onto a high Z metal converter. The electron flow from the IVA driver into the load region complicates understanding of diode evolution. There is growing evidence that reducing cathode size below some ``optimum'' value in order to achieve desired spot size reduction results in pinch instabilities leading to either reduced dose-rate, early radiation power termination, or both. We are studying evolving pinch dynamics with current and x-ray monitors, optical diagnostics, and spectroscopy, as well as with LSP [1] code simulations. We are also planning changes to anode-cathode materials as well as changes to the diode aspect ratio in an attempt to mitigate the above trends and improve pinch stability while achieving simultaneous spot size reduction. Experiments are ongoing, and latest results will be reported [1]. LSP is a software product of ATK Mission Research, Albuquerque, NM. Sandia National Laboratories is a multiprogram laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Adminis-tration under Contract DE-AC04-94AL85000.

Operateurs et engins de calcul en virgule flottante et leur application a la simulation en temps reel sur FPGA

NASA Astrophysics Data System (ADS)

Ould Bachir, Tarek

The real-time simulation of electrical networks gained a vivid industrial interest during recent years, motivated by the substantial development cost reduction that such a prototyping approach can offer. Real-time simulation allows the progressive inclusion of real hardware during its development, allowing its testing under realistic conditions. However, CPU-based simulations suffer from certain limitations such as the difficulty to reach time-steps of a few microsecond, an important challenge brought by modern power converters. Hence, industrial practitioners adopted the FPGA as a platform of choice for the implementation of calculation engines dedicated to the rapid real-time simulation of electrical networks. The reconfigurable technology broke the 5 kHz switching frequency barrier that is characteristic of CPU-based simulations. Moreover, FPGA-based real-time simulation offers many advantages, including the reduced latency of the simulation loop that is obtained thanks to a direct access to sensors and actuators. The fixed-point format is paradigmatic to FPGA-based digital signal processing. However, the format imposes a time penalty in the development process since the designer has to asses the required precision for all model variables. This fact brought an import research effort on the use of the floating-point format for the simulation of electrical networks. One of the main challenges in the use of the floating-point format are the long latencies required by the elementary arithmetic operators, particularly when an adder is used as an accumulator, an important building bloc for the implementation of integration rules such as the trapezoidal method. Hence, single-cycle floating-point accumulation forms the core of this research work. Our results help building such operators as accumulators, multiply-accumulators (MACs), and dot-product (DP) operators. These operators play a key role in the implementation of the proposed calculation engines. Therefore, this thesis contributes to the realm of FPGA-based real-time simulation in many ways. The research work proposes a new summation algorithm, which is a generalization of the so-called self-alignment technique. The new formulation is broader, simpler in its expression and hardware implementation. Our research helps formulating criteria to guarantee good accuracy, the criteria being established on a theoretical, as well as empirical basis. Moreover, the thesis offers a comprehensive analysis on the use of the redundant high radix carry-save (HRCS) format. The HRCS format is used to perform rapid additions of large mantissas. Two new HRCS operators are also proposed, namely an endomorphic adder and a HRCS to conventional converter. Once the mean to single-cycle accumulation is defined as a combination of the self-alignment technique and the HRCS format, the research focuses on the FPGA implementation of SIMD calculation engines using parallel floating-point MACs or DPs. The proposed operators are characterized by low latencies, allowing the engines to reach very low time-steps. The document finally discusses power electronic circuits modelling, and concludes with the presentation of a versatile calculation engine capable of simulating power converter with arbitrary topologies and up to 24 switches, while achieving time steps below 1 mus and allowing switching frequencies in the range of tens kilohertz. The latter realization has led to commercialization of a product by our industrial partner.

Hardware Implementation of a Bilateral Subtraction Filter

NASA Technical Reports Server (NTRS)

Huertas, Andres; Watson, Robert; Villalpando, Carlos; Goldberg, Steven

2009-01-01

A bilateral subtraction filter has been implemented as a hardware module in the form of a field-programmable gate array (FPGA). In general, a bilateral subtraction filter is a key subsystem of a high-quality stereoscopic machine vision system that utilizes images that are large and/or dense. Bilateral subtraction filters have been implemented in software on general-purpose computers, but the processing speeds attainable in this way even on computers containing the fastest processors are insufficient for real-time applications. The present FPGA bilateral subtraction filter is intended to accelerate processing to real-time speed and to be a prototype of a link in a stereoscopic-machine- vision processing chain, now under development, that would process large and/or dense images in real time and would be implemented in an FPGA. In terms that are necessarily oversimplified for the sake of brevity, a bilateral subtraction filter is a smoothing, edge-preserving filter for suppressing low-frequency noise. The filter operation amounts to replacing the value for each pixel with a weighted average of the values of that pixel and the neighboring pixels in a predefined neighborhood or window (e.g., a 9 9 window). The filter weights depend partly on pixel values and partly on the window size. The present FPGA implementation of a bilateral subtraction filter utilizes a 9 9 window. This implementation was designed to take advantage of the ability to do many of the component computations in parallel pipelines to enable processing of image data at the rate at which they are generated. The filter can be considered to be divided into the following parts (see figure): a) An image pixel pipeline with a 9 9- pixel window generator, b) An array of processing elements; c) An adder tree; d) A smoothing-and-delaying unit; and e) A subtraction unit. After each 9 9 window is created, the affected pixel data are fed to the processing elements. Each processing element is fed the pixel value for its position in the window as well as the pixel value for the central pixel of the window. The absolute difference between these two pixel values is calculated and used as an address in a lookup table. Each processing element has a lookup table, unique for its position in the window, containing the weight coefficients for the Gaussian function for that position. The pixel value is multiplied by the weight, and the outputs of the processing element are the weight and pixel-value weight product. The products and weights are fed to the adder tree. The sum of the products and the sum of the weights are fed to the divider, which computes the sum of products the sum of weights. The output of the divider is denoted the bilateral smoothed image. The smoothing function is a simple weighted average computed over a 3 3 subwindow centered in the 9 9 window. After smoothing, the image is delayed by an additional amount of time needed to match the processing time for computing the bilateral smoothed image. The bilateral smoothed image is then subtracted from the 3 3 smoothed image to produce the final output. The prototype filter as implemented in a commercially available FPGA processes one pixel per clock cycle. Operation at a clock speed of 66 MHz has been demonstrated, and results of a static timing analysis have been interpreted as suggesting that the clock speed could be increased to as much as 100 MHz.

Nanowire nanocomputer as a finite-state machine.

PubMed

Yao, Jun; Yan, Hao; Das, Shamik; Klemic, James F; Ellenbogen, James C; Lieber, Charles M

2014-02-18

Implementation of complex computer circuits assembled from the bottom up and integrated on the nanometer scale has long been a goal of electronics research. It requires a design and fabrication strategy that can address individual nanometer-scale electronic devices, while enabling large-scale assembly of those devices into highly organized, integrated computational circuits. We describe how such a strategy has led to the design, construction, and demonstration of a nanoelectronic finite-state machine. The system was fabricated using a design-oriented approach enabled by a deterministic, bottom-up assembly process that does not require individual nanowire registration. This methodology allowed construction of the nanoelectronic finite-state machine through modular design using a multitile architecture. Each tile/module consists of two interconnected crossbar nanowire arrays, with each cross-point consisting of a programmable nanowire transistor node. The nanoelectronic finite-state machine integrates 180 programmable nanowire transistor nodes in three tiles or six total crossbar arrays, and incorporates both sequential and arithmetic logic, with extensive intertile and intratile communication that exhibits rigorous input/output matching. Our system realizes the complete 2-bit logic flow and clocked control over state registration that are required for a finite-state machine or computer. The programmable multitile circuit was also reprogrammed to a functionally distinct 2-bit full adder with 32-set matched and complete logic output. These steps forward and the ability of our unique design-oriented deterministic methodology to yield more extensive multitile systems suggest that proposed general-purpose nanocomputers can be realized in the near future.

Multiple advanced logic gates made of DNA-Ag nanocluster and the application for intelligent detection of pathogenic bacterial genes† †Electronic supplementary information (ESI) available: Chemicals, materials and DNA sequences used in the investigation, the construction of YES, AND, OR, XOR and INH logic gates, CD and PAGE experimental results. See DOI: 10.1039/c7sc05246d

PubMed Central

Lin, Xiaodong; Deng, Jiankang; Lyu, Yanlong; Qian, Pengcheng; Li, Yunfei

2018-01-01

The integration of multiple DNA logic gates on a universal platform to implement advance logic functions is a critical challenge for DNA computing. Herein, a straightforward and powerful strategy in which a guanine-rich DNA sequence lighting up a silver nanocluster and fluorophore was developed to construct a library of logic gates on a simple DNA-templated silver nanoclusters (DNA-AgNCs) platform. This library included basic logic gates, YES, AND, OR, INHIBIT, and XOR, which were further integrated into complex logic circuits to implement diverse advanced arithmetic/non-arithmetic functions including half-adder, half-subtractor, multiplexer, and demultiplexer. Under UV irradiation, all the logic functions could be instantly visualized, confirming an excellent repeatability. The logic operations were entirely based on DNA hybridization in an enzyme-free and label-free condition, avoiding waste accumulation and reducing cost consumption. Interestingly, a DNA-AgNCs-based multiplexer was, for the first time, used as an intelligent biosensor to identify pathogenic genes, E. coli and S. aureus genes, with a high sensitivity. The investigation provides a prototype for the wireless integration of multiple devices on even the simplest single-strand DNA platform to perform diverse complex functions in a straightforward and cost-effective way. PMID:29675221

A precision analogue integrator system for heavy current measurement in MFDC resistance spot welding

NASA Astrophysics Data System (ADS)

Xia, Yu-Jun; Zhang, Zhong-Dian; Xia, Zhen-Xin; Zhu, Shi-Liang; Zhang, Rui

2016-02-01

In order to control and monitor the quality of middle frequency direct current (MFDC) resistance spot welding (RSW), precision measurement of the welding current up to 100 kA is required, for which Rogowski coils are the only viable current transducers at present. Thus, a highly accurate analogue integrator is the key to restoring the converted signals collected from the Rogowski coils. Previous studies emphasised that the integration drift is a major factor that influences the performance of analogue integrators, but capacitive leakage error also has a significant impact on the result, especially in long-time pulse integration. In this article, new methods of measuring and compensating capacitive leakage error are proposed to fabricate a precision analogue integrator system for MFDC RSW. A voltage holding test is carried out to measure the integration error caused by capacitive leakage, and an original integrator with a feedback adder is designed to compensate capacitive leakage error in real time. The experimental results and statistical analysis show that the new analogue integrator system could constrain both drift and capacitive leakage error, of which the effect is robust to different voltage levels of output signals. The total integration error is limited within  ±0.09 mV s-1 0.005% s-1 or full scale at a 95% confidence level, which makes it possible to achieve the precision measurement of the welding current of MFDC RSW with Rogowski coils of 0.1% accuracy class.

An Efficient Implementation For Real Time Applications Of The Wigner-Ville Distribution

NASA Astrophysics Data System (ADS)

Boashash, Boualem; Black, Peter; Whitehouse, Harper J.

1986-03-01

The Wigner-Ville Distribution (WVD) is a valuable tool for time-frequency signal analysis. In order to implement the WVD in real time an efficient algorithm and architecture have been developed which may be implemented with commercial components. This algorithm successively computes the analytic signal corresponding to the input signal, forms a weighted kernel function and analyses the kernel via a Discrete Fourier Transform (DFT). To evaluate the analytic signal required by the algorithm it is shown that the time domain definition implemented as a finite impulse response (FIR) filter is practical and more efficient than the frequency domain definition of the analytic signal. The windowed resolution of the WVD in the frequency domain is shown to be similar to the resolution of a windowed Fourier Transform. A real time signal processsor has been designed for evaluation of the WVD analysis system. The system is easily paralleled and can be configured to meet a variety of frequency and time resolutions. The arithmetic unit is based on a pair of high speed VLSI floating-point multiplier and adder chips. Dual operand buses and an independent result bus maximize data transfer rates. The system is horizontally microprogrammed and utilizes a full instruction pipeline. Each microinstruction specifies two operand addresses, a result location, the type of arithmetic and the memory configuration. input and output is via shared memory blocks with front-end processors to handle data transfers during the non access periods of the analyzer.

Modeling the effects of anthropogenic habitat change on savanna snake invasions into African rainforest.

PubMed

Freedman, Adam H; Buermann, Wolfgang; Lebreton, Matthew; Chirio, Laurent; Smith, Thomas B

2009-02-01

We used a species-distribution modeling approach, ground-based climate data sets, and newly available remote-sensing data on vegetation from the MODIS and Quick Scatterometer sensors to investigate the combined effects of human-caused habitat alterations and climate on potential invasions of rainforest by 3 savanna snake species in Cameroon, Central Africa: the night adder (Causus maculatus), olympic lined snake (Dromophis lineatus), and African house snake (Lamprophis fuliginosus). Models with contemporary climate variables and localities from native savanna habitats showed that the current climate in undisturbed rainforest was unsuitable for any of the snake species due to high precipitation. Limited availability of thermally suitable nest sites and mismatches between important life-history events and prey availability are a likely explanation for the predicted exclusion from undisturbed rainforest. Models with only MODIS-derived vegetation variables and savanna localities predicted invasion in disturbed areas within the rainforest zone, which suggests that human removal of forest cover creates suitable microhabitats that facilitate invasions into rainforest. Models with a combination of contemporary climate, MODIS- and Quick Scatterometer-derived vegetation variables, and forest and savanna localities predicted extensive invasion into rainforest caused by rainforest loss. In contrast, a projection of the present-day species-climate envelope on future climate suggested a reduction in invasion potential within the rainforest zone as a consequence of predicted increases in precipitation. These results emphasize that the combined responses of deforestation and climate change will likely be complex in tropical rainforest systems.

Nanowire nanocomputer as a finite-state machine

PubMed Central

Yao, Jun; Yan, Hao; Das, Shamik; Klemic, James F.; Ellenbogen, James C.; Lieber, Charles M.

2014-01-01

Implementation of complex computer circuits assembled from the bottom up and integrated on the nanometer scale has long been a goal of electronics research. It requires a design and fabrication strategy that can address individual nanometer-scale electronic devices, while enabling large-scale assembly of those devices into highly organized, integrated computational circuits. We describe how such a strategy has led to the design, construction, and demonstration of a nanoelectronic finite-state machine. The system was fabricated using a design-oriented approach enabled by a deterministic, bottom–up assembly process that does not require individual nanowire registration. This methodology allowed construction of the nanoelectronic finite-state machine through modular design using a multitile architecture. Each tile/module consists of two interconnected crossbar nanowire arrays, with each cross-point consisting of a programmable nanowire transistor node. The nanoelectronic finite-state machine integrates 180 programmable nanowire transistor nodes in three tiles or six total crossbar arrays, and incorporates both sequential and arithmetic logic, with extensive intertile and intratile communication that exhibits rigorous input/output matching. Our system realizes the complete 2-bit logic flow and clocked control over state registration that are required for a finite-state machine or computer. The programmable multitile circuit was also reprogrammed to a functionally distinct 2-bit full adder with 32-set matched and complete logic output. These steps forward and the ability of our unique design-oriented deterministic methodology to yield more extensive multitile systems suggest that proposed general-purpose nanocomputers can be realized in the near future. PMID:24469812

Ultrafast all-optical arithmetic logic based on hydrogenated amorphous silicon microring resonators

NASA Astrophysics Data System (ADS)

Gostimirovic, Dusan; Ye, Winnie N.

2016-03-01

For decades, the semiconductor industry has been steadily shrinking transistor sizes to fit more performance into a single silicon-based integrated chip. This technology has become the driving force for advances in education, transportation, and health, among others. However, transistor sizes are quickly approaching their physical limits (channel lengths are now only a few silicon atoms in length), and Moore's law will likely soon be brought to a stand-still despite many unique attempts to keep it going (FinFETs, high-k dielectrics, etc.). This technology must then be pushed further by exploring (almost) entirely new methodologies. Given the explosive growth of optical-based long-haul telecommunications, we look to apply the use of high-speed optics as a substitute to the digital model; where slow, lossy, and noisy metal interconnections act as a major bottleneck to performance. We combine the (nonlinear) optical Kerr effect with a single add-drop microring resonator to perform the fundamental AND-XOR logical operations of a half adder, by all-optical means. This process is also applied to subtraction, higher-order addition, and the realization of an all-optical arithmetic logic unit (ALU). The rings use hydrogenated amorphous silicon as a material with superior nonlinear properties to crystalline silicon, while still maintaining CMOS-compatibility and the many benefits that come with it (low cost, ease of fabrication, etc.). Our method allows for multi-gigabit-per-second data rates while maintaining simplicity and spatial minimalism in design for high-capacity manufacturing potential.

Hermes III

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hasti, D.E.; Ramirez, J.J.; Prestwich, K.R.

1985-01-01

Hermes III is a major new gamma-ray simulator that is part of the Simulation Technology Laboratory Project. This accelerator will significantly improve the capability of Sandia National Laboratories and the Department of Energy to evaluate the effects of gamma-ray radiation from nuclear weapons on weapons subsystems. This accelerator will be designed to produce 10/sup 5/R, 5 x 10/sup 12/ R/S and 2 x 10/sup 20/ R/S/sup 2/ over a 500 cm/sup 2/ area. The radiation dose will vary less than a factor of two over this area and less than a factor of four throughout a volume found by extendingmore » this surface 15 cm further from the gamma-ray converter. The minimum dose in this volume will be greater than or equal to5 x 10/sup 4/ R. The accelerator will be designed with sufficient reliability and short enough turn-around time to produce more than 600 radiation pulses per year. In Hermes III we are increasing the peak power in the beam from 1.2 TW of Hermes II to 16 TW. Two techniques for achieving these high powers have been successfully developed. The first technique is a high current linear induction accelerator with several parallel beams. Experiments to evaluate this concept were done on the MABE accelerator. The second concept uses induction cavities and a magnetically insulated transmission line (MITL) to form a multi-terawatt voltage adder. This report gives a detailed description of Hermes III and its components.« less

Functional Circuitry on Commercial Fabric via Textile-Compatible Nanoscale Film Coating Process for Fibertronics.

PubMed

Bae, Hagyoul; Jang, Byung Chul; Park, Hongkeun; Jung, Soo-Ho; Lee, Hye Moon; Park, Jun-Young; Jeon, Seung-Bae; Son, Gyeongho; Tcho, Il-Woong; Yu, Kyoungsik; Im, Sung Gap; Choi, Sung-Yool; Choi, Yang-Kyu

2017-10-11

Fabric-based electronic textiles (e-textiles) are the fundamental components of wearable electronic systems, which can provide convenient hand-free access to computer and electronics applications. However, e-textile technologies presently face significant technical challenges. These challenges include difficulties of fabrication due to the delicate nature of the materials, and limited operating time, a consequence of the conventional normally on computing architecture, with volatile power-hungry electronic components, and modest battery storage. Here, we report a novel poly(ethylene glycol dimethacrylate) (pEGDMA)-textile memristive nonvolatile logic-in-memory circuit, enabling normally off computing, that can overcome those challenges. To form the metal electrode and resistive switching layer, strands of cotton yarn were coated with aluminum (Al) using a solution dip coating method, and the pEGDMA was conformally applied using an initiated chemical vapor deposition process. The intersection of two Al/pEGDMA coated yarns becomes a unit memristor in the lattice structure. The pEGDMA-Textile Memristor (ETM), a form of crossbar array, was interwoven using a grid of Al/pEGDMA coated yarns and untreated yarns. The former were employed in the active memristor and the latter suppressed cell-to-cell disturbance. We experimentally demonstrated for the first time that the basic Boolean functions, including a half adder as well as NOT, NOR, OR, AND, and NAND logic gates, are successfully implemented with the ETM crossbar array on a fabric substrate. This research may represent a breakthrough development for practical wearable and smart fibertronics.

Healing with animals in the Levant from the 10th to the 18th century

PubMed Central

Lev, Efraim

2006-01-01

Animals and products derived from different organs of their bodies have constituted part of the inventory of medicinal substances used in various cultures since ancient times. The article reviews the history of healing with animals in the Levant (The Land of Israel and parts of present-day Syria, Lebanon, and Jordan, defined by the Muslims in the Middle Ages as Bilad al-Sham) in the medieval and early Ottoman periods. Intensive research into the phenomenon of zootherapy in the medieval and early Ottoman Levant has yielded forty-eight substances of animal origin that were used medicinally. The vast majority of these substances were local and relatively easy to obtain. Most of the substances were domestic (honey, wax, silkworm, etc.), others were part of the local wildlife (adder, cuttle fish, flycatcher, firefly, frog, triton, scorpion, etc.), part of the usual medieval household (milk, egg, cheese, lamb, etc.), or parasites (louse, mouse, stinkbug, etc.). Fewer substances were not local but exotic, and therefore rare and expensive (beaver testicles, musk oil, coral, ambergris, etc.). The range of symptoms that the substances of animal origin were used to treat was extensive and included most of the known diseases and maladies of that era: mainly hemorrhoids, burns, impotence, wounds, and skin, eye, and stomach diseases. Changes in the moral outlook of modern societies caused the use of several substances of animal origin to cease in the course of history. These include mummy, silkworm, stinkbug, scarabees, snail, scorpion, and triton. PMID:16504024

Healing with animals in the Levant from the 10th to the 18th century.

PubMed

Lev, Efraim

2006-02-21

Animals and products derived from different organs of their bodies have constituted part of the inventory of medicinal substances used in various cultures since ancient times. The article reviews the history of healing with animals in the Levant (The Land of Israel and parts of present-day Syria, Lebanon, and Jordan, defined by the Muslims in the Middle Ages as Bilad al-Sham) in the medieval and early Ottoman periods. Intensive research into the phenomenon of zootherapy in the medieval and early Ottoman Levant has yielded forty-eight substances of animal origin that were used medicinally. The vast majority of these substances were local and relatively easy to obtain. Most of the substances were domestic (honey, wax, silkworm, etc.), others were part of the local wildlife (adder, cuttle fish, flycatcher, firefly, frog, triton, scorpion, etc.), part of the usual medieval household (milk, egg, cheese, lamb, etc.), or parasites (louse, mouse, stinkbug, etc.). Fewer substances were not local but exotic, and therefore rare and expensive (beaver testicles, musk oil, coral, ambergris, etc.). The range of symptoms that the substances of animal origin were used to treat was extensive and included most of the known diseases and maladies of that era: mainly hemorrhoids, burns, impotence, wounds, and skin, eye, and stomach diseases. Changes in the moral outlook of modern societies caused the use of several substances of animal origin to cease in the course of history. These include mummy, silkworm, stinkbug, scarabees, snail, scorpion, and triton.

A 16X16 Discrete Cosine Transform Chip

NASA Astrophysics Data System (ADS)

Sun, M. T.; Chen, T. C.; Gottlieb, A.; Wu, L.; Liou, M. L.

1987-10-01

Among various transform coding techniques for image compression the Discrete Cosine Transform (DCT) is considered to be the most effective method and has been widely used in the laboratory as well as in the market, place. DCT is computationally intensive. For video application at 14.3 MHz sample rate, a direct implementation of a 16x16 DCT requires a throughput, rate of approximately half a billion multiplications per second. In order to reduce the cost of hardware implementation, a single chip DCT implementation is highly desirable. In this paper, the implementation of a 16x16 DCT chip using a concurrent architecture will be presented. The chip is designed for real-time processing of 14.3 MHz sampled video data. It uses row-column decomposition to implement the two-dimensional transform. Distributed arithmetic combined with hit-serial and hit-parallel structures is used to implement the required vector inner products concurrently. Several schemes are utilized to reduce the size of required memory. The resultant circuit only uses memory, shift registers, and adders. No multipliers are required. It achieves high speed performance with a very regular and efficient integrated circuit realization. The chip accepts 0-bit input and produces 14-bit DCT coefficients. 12 bits are maintained after the first one-dimensional transform. The circuit has been laid out using a 2-μm CMOS technology with a symbolic design tool MULGA. The core contains approximately 73,000 transistors in an area of 7.2 x 7.0

Did death certificates and a death review process agree on lung cancer cause of death in the National Lung Screening Trial?

PubMed

Marcus, Pamela M; Doria-Rose, Vincent Paul; Gareen, Ilana F; Brewer, Brenda; Clingan, Kathy; Keating, Kristen; Rosenbaum, Jennifer; Rozjabek, Heather M; Rathmell, Joshua; Sicks, JoRean; Miller, Anthony B

2016-08-01

Randomized controlled trials frequently use death review committees to assign a cause of death rather than relying on cause of death information from death certificates. The National Lung Screening Trial, a randomized controlled trial of lung cancer screening with low-dose computed tomography versus chest X-ray for heavy and/or long-term smokers ages 55-74 years at enrollment, used a committee blinded to arm assignment for a subset of deaths to determine whether cause of death was due to lung cancer. Deaths were selected for review using a pre-determined computerized algorithm. The algorithm, which considered cancers diagnosed during the trial, causes and significant conditions listed on the death certificate, and the underlying cause of death derived from death certificate information by trained nosologists, selected deaths that were most likely to represent a death due to lung cancer (either directly or indirectly) and deaths that might have been erroneously assigned lung cancer as the cause of death. The algorithm also selected deaths that might be due to adverse events of diagnostic evaluation for lung cancer. Using the review cause of death as the gold standard and lung cancer cause of death as the outcome of interest (dichotomized as lung cancer versus not lung cancer), we calculated performance measures of the death certificate cause of death. We also recalculated the trial primary endpoint using the death certificate cause of death. In all, 1642 deaths were reviewed and assigned a cause of death (42% of the 3877 National Lung Screening Trial deaths). Sensitivity of death certificate cause of death was 91%; specificity, 97%; positive predictive value, 98%; and negative predictive value, 89%. About 40% of the deaths reclassified to lung cancer cause of death had a death certificate cause of death of a neoplasm other than lung. Using the death certificate cause of death, the lung cancer mortality reduction was 18% (95% confidence interval: 4.2-25.0), as compared with the published finding of 20% (95% confidence interval: 6.7-26.7). Death review may not be necessary for primary-outcome analyses in lung cancer screening trials. If deemed necessary, researchers should strive to streamline the death review process as much as possible. © The Author(s) 2016.

Reasons for not reporting deaths: a qualitative study in rural Vietnam.

PubMed

Huy, Tran Quang; Johansson, Annika; Long, Nguyen Hoang

2007-01-01

This qualitative study explores socio-cultural and health systems factors that may impact on death reporting by lay people to registry systems at the commune level. Information on local perceptions of death and factors influencing death reporting were gathered through nine focus group discussions with people of different religions and ethnic affiliations in a rural district of northern Vietnam. Participants classified deaths as "elderly deaths," "young deaths," and "child deaths." Child deaths, including newborn deaths, used to be considered punishment for sins committed by ancestors, but this is no longer the case. Concepts of the human soul and afterlife differ between the Catholic and Buddhist groups, influencing funeral rituals and reporting, especially of infant deaths. Participants regarded elderly deaths as "natural" and "deserved," while young deaths were seen as either "good deaths" or "bad deaths." "Bad deaths" were defined as deaths of "dishonourable" persons who had led a "bad life" involving activities such as gambling, drinking or stealing. The causes of "bad deaths" and deaths due to stigmatized diseases (e.g., HIV/AIDS, tuberculosis and leprosy) were often concealed by the family. The study suggests that the risk of under-reporting deaths seems to be largest for deaths of infants and "bad deaths." Little awareness of regulations and lack of incentives for reporting or lack of sanctions for not reporting deaths also result in under-reporting of deaths. Therefore, education programs and enforcement of legal regulations on death notification should be emphasized. The risk of misreporting the real causes of "bad deaths" and deaths due to stigmatized diseases should be considered in verbal autopsy interviews. Using different sources of information (triangulation) is useful in order to minimize both under-registration and misreporting causes of death.

Comparing unplanned and potentially planned home deaths: a population-based cross-sectional study.

PubMed

Kjellstadli, Camilla; Husebø, Bettina Sandgathe; Sandvik, Hogne; Flo, Elisabeth; Hunskaar, Steinar

2018-05-02

There is little research on number of planned home deaths. We need information about factors associated with home deaths, but also differences between planned and unplanned home deaths to improve end-of-life-care at home and make home deaths a feasible alternative. Our aim was to investigate factors associated with home deaths, estimate number of potentially planned home deaths, and differences in individual characteristics between people with and without a potentially planned home death. A cross-sectional study of all decedents in Norway in 2012 and 2013, using data from the Norwegian Cause of Death Registry and National registry for statistics on municipal health and care services. We defined planned home death by an indirect algorithm-based method using domiciliary care and diagnosis. We used logistic regressions models to evaluate factors associated with home death compared with nursing home and hospital; and to compare unplanned home deaths and potentially planned home deaths. Among 80,908 deaths, 12,156 (15.0%) were home deaths. A home death was most frequent in 'Circulatory diseases' and 'Cancer', and associated with male sex, younger age, receiving domiciliary care and living alone. Only 2.3% of home deaths were from 'Dementia'. In total, 41.9% of home deaths and 6.3% of all deaths were potentially planned home deaths. Potentially planned home deaths were associated with higher age, but declined in ages above 80 years for people who had municipal care. Living together with someone was associated with more potentially planned home deaths for people with municipal care. There are few home deaths in Norway. Our estimations indicate that even fewer people than anticipated have a potentially planned home death.

Representativeness of deaths identified through the injury-at-work item on the death certificate: implications for surveillance.

PubMed Central

Russell, J; Conroy, C

1991-01-01

BACKGROUND. This research investigated the accuracy of the injury-at-work item on the death certificate for surveillance of occupational injury deaths in Oklahoma during 1985 and 1986. METHODS. Representativeness of occupational injury deaths identified by death certificates was assessed by comparing these deaths with all occupational injury deaths identified through death certificates, workers' compensation reports, medical examiner reports, and OSHA records for categories of occupation, industry, and external causes of death. RESULTS. Certain external causes of death (e.g., motor vehicle traffic deaths) and certain occupations (e.g., farming) and industries (agriculture and services) are more often underidentified through death certificates. CONCLUSIONS. The findings of this study support Baker's observation that no single data source contains all deaths or all the data elements necessary to describe occupational injury deaths. Data sources may be combined to improve representativeness through more complete case ascertainment. PMID:1836109

FastStats: Accidents or Unintentional Injuries

MedlinePlus

... 17 [PDF – 676 KB] Mortality All unintentional injury deaths Number of deaths: 146,571 Deaths per 100, ... 6 Cause of death rank: 4 Unintentional fall deaths Number of deaths: 33,381 Deaths per 100, ...

Using National Inpatient Death Rates as a Benchmark to Identify Hospitals with Inaccurate Cause of Death Reporting - Missouri, 2009-2012.

PubMed

Lloyd, Jennifer; Jahanpour, Ehsan; Angell, Brian; Ward, Craig; Hunter, Andy; Baysinger, Cherri; Turabelidze, George

2017-01-13

Reporting causes of death accurately is essential to public health and hospital-based programs; however, some U.S. studies have identified substantial inaccuracies in cause of death reporting. Using CDC's national inpatient hospital death rates as a benchmark, the Missouri Department of Health and Senior Services (DHSS) analyzed inpatient death rates reported by hospitals with high inpatient death rates in St. Louis and Kansas City metro areas. Among the selected hospitals with high inpatient death rates, 45.8% of death certificates indicated an underlying cause of death that was inconsistent with CDC's Guidelines for Death Certificate completion. Selected hospitals with high inpatient death rates were more likely to overreport heart disease and renal disease, and underreport cancer as an underlying cause of death. Based on these findings, the Missouri DHSS initiated a new web-based training module for death certificate completion based on the CDC guidelines in an effort to improve accuracy in cause of death reporting.

Magnitude of discordance between registry data and death certificate when evaluating leading causes of death in dialysis patients.

PubMed

Lafrance, Jean-Philippe; Rahme, Elham; Iqbal, Sameena; Leblanc, Martine; Pichette, Vincent; Elftouh, Naoual; Vallée, Michel

2013-03-27

Discordance between dialysis registry and death certificate reported death has been demonstrated. Since cause of death is measured using registry data in dialysis patients and death certificate data in the general population, comparisons of cause of death proportions between dialysis patients and the general population may be biased. Our aim was to compare the proportion of deaths attributed to cardiovascular disease (CVD), malignancy, and infections between patients receiving dialysis and the general population using death certificates for both, and to quantify the magnitude of discrepancy between registry and death certificate estimates in dialysis patients. A retrospective cohort study of 5858 patients initiating maintenance dialysis between 2001 and 2007 was conducted. Cause of death was obtained from both registry and death certificate data for dialysis patients, and from death certificate data for the general population. Compared to the general population, use of death certificate data in dialysis patients resulted in smaller differences in the proportion of deaths attributed to CVD or infection than that from the registry. In the general population, the proportion of deaths due to CVD is 29.3% for men and 28.2% for women, and the proportion of deaths due to infection is 3.3% for men and 3.6% for women. For men, the proportion of deaths in dialysis patients due to CVD using registry data is 41.5%, compared with a proportion of 32.1% using death certificate data. Similarly for women, the proportion of deaths due to CVD using registry data is 35.2% and that using death certificate data 24.3%. The proportion of deaths due to infection in dialysis patients follows the same pattern: for men, the proportion of deaths due to infection using registry data is 9.9% and that from death certificate data at 5.0%; while for women the proportions are 11.6% and 4.8%, respectively. While absolute cause-specific mortality rates did differ, evaluation of causes of death using death certificate in dialysis patients in Quebec revealed that they do not have substantially different proportion of death due to CVD or infections than the general population. Infections appeared to be a frequent complication leading to death, suggesting that infections are an important target to consider for reducing mortality in dialysis populations.

Evolution of Cell Size Homeostasis and Growth Rate Diversity during Initial Surface Colonization of Shewanella oneidensis.

PubMed

Lee, Calvin K; Kim, Alexander J; Santos, Giancarlo S; Lai, Peter Y; Lee, Stella Y; Qiao, David F; Anda, Jaime De; Young, Thomas D; Chen, Yujie; Rowe, Annette R; Nealson, Kenneth H; Weiss, Paul S; Wong, Gerard C L

2016-09-06

Cell size control and homeostasis are fundamental features of bacterial metabolism. Recent work suggests that cells add a constant size between birth and division ("adder" model). However, it is not known how cell size homeostasis is influenced by the existence of heterogeneous microenvironments, such as those during biofilm formation. Shewanella oneidensis MR-1 can use diverse energy sources on a range of surfaces via extracellular electron transport (EET), which can impact growth, metabolism, and size diversity. Here, we track bacterial surface communities at single-cell resolution to show that not only do bacterial motility appendages influence the transition from two- to three-dimensional biofilm growth and control postdivisional cell fates, they strongly impact cell size homeostasis. For every generation, we find that the average growth rate for cells that stay on the surface and continue to divide (nondetaching population) and that for cells that detach before their next division (detaching population) are roughly constant. However, the growth rate distribution is narrow for the nondetaching population, but broad for the detaching population in each generation. Interestingly, the appendage deletion mutants (ΔpilA, ΔmshA-D, Δflg) have significantly broader growth rate distributions than that of the wild type for both detaching and nondetaching populations, which suggests that Shewanella appendages are important for sensing and integrating environmental inputs that contribute to size homeostasis. Moreover, our results suggest multiplexing of appendages for sensing and motility functions contributes to cell size dysregulation. These results can potentially provide a framework for generating metabolic diversity in S. oneidensis populations to optimize EET in heterogeneous environments.

Interrogating the Escherichia coli cell cycle by cell dimension perturbations

PubMed Central

Zheng, Hai; Ho, Po-Yi; Jiang, Meiling; Tang, Bin; Liu, Weirong; Li, Dengjin; Yu, Xuefeng; Kleckner, Nancy E.; Amir, Ariel; Liu, Chenli

2016-01-01

Bacteria tightly regulate and coordinate the various events in their cell cycles to duplicate themselves accurately and to control their cell sizes. Growth of Escherichia coli, in particular, follows a relation known as Schaechter’s growth law. This law says that the average cell volume scales exponentially with growth rate, with a scaling exponent equal to the time from initiation of a round of DNA replication to the cell division at which the corresponding sister chromosomes segregate. Here, we sought to test the robustness of the growth law to systematic perturbations in cell dimensions achieved by varying the expression levels of mreB and ftsZ. We found that decreasing the mreB level resulted in increased cell width, with little change in cell length, whereas decreasing the ftsZ level resulted in increased cell length. Furthermore, the time from replication termination to cell division increased with the perturbed dimension in both cases. Moreover, the growth law remained valid over a range of growth conditions and dimension perturbations. The growth law can be quantitatively interpreted as a consequence of a tight coupling of cell division to replication initiation. Thus, its robustness to perturbations in cell dimensions strongly supports models in which the timing of replication initiation governs that of cell division, and cell volume is the key phenomenological variable governing the timing of replication initiation. These conclusions are discussed in the context of our recently proposed “adder-per-origin” model, in which cells add a constant volume per origin between initiations and divide a constant time after initiation. PMID:27956612

Method and apparatus for enhancing microchannel plate data

DOEpatents

Thoe, R.S.

1983-10-24

A method and apparatus for determining centroid channel locations are disclosed for use in a system activated by one or more multichannel plates and including a linear diode array providing channels of information 1, 2, ...,n, ..., N containing signal amplitudes A/sub n/. A source of analog A/sub n/ signals, and a source of digital clock signals n, are provided. Non-zero A/sub n/ values are detected in a discriminator. A digital signal representing p, the value of n immediately preceding that whereat A/sub n/ takes its first non-zero value, is generated in a scaler. The analog A/sub n/ signals are converted to digital in an analog to digital converter. The digital A/sub n/ signals are added to produce a digital ..sigma..A/sub n/ signal in a full adder. Digital 1, 2, ..., m signals representing the number of non-zero A/sub n/ are produced by a discriminator pulse counter. Digital signals representing 1 A/sub p+1/, 2 A/sub p+2/, ..., m A/sub p+m/ are produced by pairwise multiplication in multiplier. These signal are added in multiplier summer to produce a digital ..sigma..nA/sub n/ - p..sigma..A/sub n/ signal. This signal is divided by the digital ..sigma..A/sub n/ signal in divider to provide a digital (..sigma..nA/sub n//..sigma..A/sub n/) -p signal. Finally, this last signal is added to the digital p signal in an offset summer to provide ..sigma..nA/sub n//..sigma..A/sub n/, the centroid channel locations.

Spatial Structure in the Infrared Spectra of Three Evolved Stars

NASA Astrophysics Data System (ADS)

Sloan, G. C.; Tandy, P. C.; Pirger, B. E.; Hodge, T. M.

1993-05-01

We have spatially resolved three evolved sources using GLADYS, a long-slit 10 microns spectrometer, at the Wyoming Infrared Observatory. These observations, made in 1993 March, were the first for GLADYS after a complete replacement of the detector drive electronics, ADCs, and hardware co-adder. We studied each source in a north/south and an east/west slit orientation. For each set of observations, we fit a gaussian to the spatial profile at each wavelength to create a spatiogram, or plot of the width of the spectrum as a function of wavelength. In both slit orientations, the spatiogram of alpha Orionis is widest at 10 microns, where the contribution from the silicate dust in the circumstellar shell is strongest. The FWHM at 10 microns is 2.0 arcsec, while our point-source comparison has a FWHM of 1.6 arcsec. These results are very similar to those presented for a N/S slit by Grasdalen, Sloan, and LeVan (1992, ApJ, 384, L25). IRC+10216 is also resolved in both slit orientations, having a FWHM of 1.9 arcsec at 11 microns, compared with 1.5 arcsec for a point source. No spectral structure is apparent in the spatiograms, indicating that there is little change in the spectral character of the emission across the source. AFGL 2688 (the Cygnus Egg) is clearly resolved in the N/S slit orientation, where its FWHM at 11 microns is 2.2 arcsec, but its spatiogram in the E/W slit orientation is barely distinguishable from that of a point source.

COBRA accelerator for Sandia ICF diode research at Cornell University

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, D.L.; Ingwersen, P.; Bennett, L.F.

1995-05-01

The new COBRA accelerator is being built in stages at the Laboratory of Plasma Studies in Cornell University where its applications will include extraction diode and ion beam research in support of the light ion inertial confinement fusion (ICF) program at Sandia National Laboratories. The 4- to 5-MV, 125- to 250-kA accelerator is based on a four-cavity inductive voltage adder (IVA) design. It is a combination of new ferromagnetically-isolated cavities and self magnetically insulated transmission line (MITL) hardware and components from existing Sandia and Cornell facilities: Marx generator capacitors, hardware, and power supply from the DEMON facility; water pulse formingmore » lines (PFL) and gas switch from the Subsystem Test Facility (STF); a HERMES-III intermediate store capacitor (ISC); and a modified ion diode from Cornell`s LION. The present accelerator consists of a single modified cavity similar to those of the Sandia SABRE accelerator and will be used to establish an operating system for the first stage initial lower voltage testing. Four new cavities will be fabricated and delivered in the first half of FY96 to complete the COBRA accelerator. COBRA is unique in the sense that each cavity is driven by a single pulse forming line, and the IVA output polarity may be reversed by rotating the cavities 180{degrees} about their vertical axis. The site preparations, tank construction, and diode design and development are taking place at Cornell with growing enthusiasm as this machine becomes a reality. Preliminary results with the single cavity and short positive inner cylinder MITL configuration will soon be available.« less

Aposematism and crypsis are not enough to explain dorsal polymorphism in the Iberian adder

NASA Astrophysics Data System (ADS)

Martínez-Freiría, Fernando; Pérez i de Lanuza, Guillem; Pimenta, António A.; Pinto, Tiago; Santos, Xavier

2017-11-01

Aposematic organisms can show phenotypic variability across their distributional ranges. The ecological advantages of this variability have been scarcely studied in vipers. We explored this issue in Vipera seoanei, a species that exhibits five geographically structured dorsal colour phenotypes across Northern Iberia: two zigzag patterned (Classic and Cantabrica), one dorsal-strip patterned (Bilineata), one even grey (Uniform), and one melanistic (Melanistic). We compared predation rates (raptors and mammals) on plasticine models resembling each colour phenotype in three localities. Visual modelling techniques were used to infer detectability (i.e. conspicuousness) of each model type for visually guided predators (i.e. diurnal raptors). We hypothesize that predation rates will be lower for the two zigzag models (aposematism hypothesis) and that models with higher detectability would show higher predation rates (detectability hypothesis). Classic and Bilineata models were the most conspicuous, while Cantabrica and Uniform were the less. Melanistic presented an intermediate conspicuousness. Predation rate was low (3.24% of models) although there was variation in attack frequency among models. Zigzag models were scarcely predated supporting the aposematic role of the zigzag pattern in European vipers to reduce predation (aposematism hypothesis). From the non-zigzag models, high predation occurred on Bilineata and Melanistic models, and low on Uniform models, partially supporting our detectability hypothesis. These results suggest particular evolutionary advantages for non-zigzag phenotypes such as better performance of Melanistic phenotypes in cold environments or better crypsis of Uniform phenotypes. Polymorphism in V. seoanei may respond to a complex number of forces acting differentially across an environmental gradient.

The portable autonomous device on the basis straw-chambers for studying secondary space radiation in a soft x-ray range on board ISS

NASA Astrophysics Data System (ADS)

Bondarenko, Valery; Shurshakov, Vyacheslav; Bondarenko, Valentina; Markina, Irina

The portable autonomous device for detection of soft x-ray radiation is described. Source of x-ray radiation is transition and brake radiations high-energy particles at passage through a material of a wall of the ISS and internal covering of the ship. A detecting elements of the device are gas proportional chambers of type straw in diameter 10 mm, length 140 mm. The wall chambers (cathode) is made from capton by thickness 70 microns. The anode of the chamber represents the gold-plated tungsten wire in diameter 30 microns. The general sensitive area of the detector is equal 110 cm2. Straw of the chambers (8 pieces) are connected consistently and are continuously blown by a gas mixture with a speed of 0,1 cm3/minute. The gas balloon in capacity of 200 cm3 under pressure 8 atm is used for flow. The device is capable to work long time in radiating fields. High radiating stability of the detector is reached by application of a radiation-steady material for manufacturing of chambers, constant gas flow during an irradiation and use of a clearing mixture on the basis of CF4. The electronic part of the device consists of the preamplifiers connected to chambers, the adder -splitter of analog signals, the spectrometer amplifier and amplitude - digitizer converter (ADC). From a splitter the signal acts on the discriminator for management ADC. Use of the discriminator allows to cut out registration of high-energy particles. The information is written on silicon disk.

Interrogating the Escherichia coli cell cycle by cell dimension perturbations.

PubMed

Zheng, Hai; Ho, Po-Yi; Jiang, Meiling; Tang, Bin; Liu, Weirong; Li, Dengjin; Yu, Xuefeng; Kleckner, Nancy E; Amir, Ariel; Liu, Chenli

2016-12-27

Bacteria tightly regulate and coordinate the various events in their cell cycles to duplicate themselves accurately and to control their cell sizes. Growth of Escherichia coli, in particular, follows a relation known as Schaechter's growth law. This law says that the average cell volume scales exponentially with growth rate, with a scaling exponent equal to the time from initiation of a round of DNA replication to the cell division at which the corresponding sister chromosomes segregate. Here, we sought to test the robustness of the growth law to systematic perturbations in cell dimensions achieved by varying the expression levels of mreB and ftsZ We found that decreasing the mreB level resulted in increased cell width, with little change in cell length, whereas decreasing the ftsZ level resulted in increased cell length. Furthermore, the time from replication termination to cell division increased with the perturbed dimension in both cases. Moreover, the growth law remained valid over a range of growth conditions and dimension perturbations. The growth law can be quantitatively interpreted as a consequence of a tight coupling of cell division to replication initiation. Thus, its robustness to perturbations in cell dimensions strongly supports models in which the timing of replication initiation governs that of cell division, and cell volume is the key phenomenological variable governing the timing of replication initiation. These conclusions are discussed in the context of our recently proposed "adder-per-origin" model, in which cells add a constant volume per origin between initiations and divide a constant time after initiation.

A Response to the Legitimacy of Brain Death in Islam.

PubMed

Rady, Mohamed Y; Verheijde, Joseph L

2016-08-01

Brain death is a novel construct of death for the procurement of transplantable organs. Many authoritative Islamic organizations and governments have endorsed brain death as true death for organ donation. Many commentators have reiterated the misconception that the Quranic text does not define death. We respond by clarifying: (1) the Quran does define death as biologic disintegration and clearly distinguishes it from the dying process, (2) brain death belongs scientifically within the spectrum of neurologic disorders of consciousness and should not be confused with death, and (3) religious and legal discord about brain death has grown in jurisdictions worldwide. We urge for public transparency and truthfulness about brain death and the accommodation and respect of religious objection to the determination of death by neurologic criteria.

Exploring children's understanding of death: through drawings and the Death Concept Questionnaire.

PubMed

Bonoti, Fotini; Leondari, Angeliki; Mastora, Adelais

2013-01-01

To investigate whether children's understanding of the concept of death varies as a function of death experience and age, 52 children aged 7, 9, and 11 years (26 had a personal death experience), drew a picture reflecting the meaning of the word death and completed the Death Concept Questionnaire for examination of Human and Animal Death. The results showed that the 2 methodological tools used offered complementary information and that children's understanding of death is related both to age and past experience. Children with death experience seem to have a more realistic understanding of death than their inexperienced age-mates. As regards to the effect of age, our findings support the assumption that the different components of death develop through different processes.

Trends in the leading causes of death in the United States, 1970-2002.

PubMed

Jemal, Ahmedin; Ward, Elizabeth; Hao, Yongping; Thun, Michael

2005-09-14

The decrease in overall death rates in the United States may mask changes in death rates from specific conditions. To examine temporal trends in the age-standardized death rates and in the number of deaths from the 6 leading causes of death in the United States. Analyses of vital statistics data on mortality in the United States from 1970 to 2002. The age-standardized death rate and number of deaths (coded as underlying cause) from each of the 6 leading causes of death: heart disease, stroke, cancer, chronic obstructive pulmonary disease, accidents (ie, related to transportation [motor vehicle, other land vehicles, and water, air, and space] and not related to transportation [falls, fire, and accidental posioning]), and diabetes mellitus. The age-standardized death rate (per 100,000 per year) from all causes combined decreased from 1242 in 1970 to 845 in 2002. The largest percentage decreases were in death rates from stroke (63%), heart disease (52%), and accidents (41%). The largest absolute decreases in death rates were from heart disease (262 deaths per 100,000), stroke (96 deaths per 100,000), and accidents (26 deaths per 100,000).The death rate from all types of cancer combined increased between 1970 and 1990 and then decreased through 2002, yielding a net decline of 2.7%. In contrast, death rates doubled from chronic obstructive pulmonary disease over the entire time interval and increased by 45% for diabetes since 1987. Despite decreases in age-standardized death rates from 4 of the 6 leading causes of death, the absolute number of deaths from these conditions continues to increase, although these deaths occur at older ages. The absolute number of deaths and age at death continue to increase in the United States. These temporal trends have major implications for health care and health care costs in an aging population.

Causes of Death in a Contemporary Cohort of Patients With Type 2 Diabetes and Atherosclerotic Cardiovascular Disease: Insights From the TECOS Trial.

PubMed

Sharma, Abhinav; Green, Jennifer B; Dunning, Allison; Lokhnygina, Yuliya; Al-Khatib, Sana M; Lopes, Renato D; Buse, John B; Lachin, John M; Van de Werf, Frans; Armstrong, Paul W; Kaufman, Keith D; Standl, Eberhard; Chan, Juliana C N; Distiller, Larry A; Scott, Russell; Peterson, Eric D; Holman, Rury R

2017-12-01

We evaluated the specific causes of death and their associated risk factors in a contemporary cohort of patients with type 2 diabetes and atherosclerotic cardiovascular disease (ASCVD). We used data from the Trial Evaluating Cardiovascular Outcomes with Sitagliptin (TECOS) study ( n = 14,671), a cardiovascular (CV) safety trial adding sitagliptin versus placebo to usual care in patients with type 2 diabetes and ASCVD (median follow-up 3 years). An independent committee blinded to treatment assignment adjudicated each cause of death. Cox proportional hazards models were used to identify risk factors associated with each outcome. A total of 1,084 deaths were adjudicated as the following: 530 CV (1.2/100 patient-years [PY], 49% of deaths), 338 non-CV (0.77/100 PY, 31% of deaths), and 216 unknown (0.49/100 PY, 20% of deaths). The most common CV death was sudden death ( n = 145, 27% of CV death) followed by acute myocardial infarction (MI)/stroke ( n = 113 [MI n = 48, stroke n = 65], 21% of CV death) and heart failure (HF) ( n = 63, 12% of CV death). The most common non-CV death was malignancy ( n = 154, 46% of non-CV death). The risk of specific CV death subcategories was lower among patients with no baseline history of HF, including sudden death (hazard ratio [HR] 0.4; P = 0.0036), MI/stroke death (HR 0.47; P = 0.049), and HF death (HR 0.29; P = 0.0057). In this analysis of a contemporary cohort of patients with diabetes and ASCVD, sudden death was the most common subcategory of CV death. HF prevention may represent an avenue to reduce the risk of specific CV death subcategories. © 2017 by the American Diabetes Association.

Transient and sustained neural responses to death-related linguistic cues

PubMed Central

Shi, Zhenhao

2013-01-01

Recent research showed that perception of death-related vs death-unrelated linguistic cues produced increased frontoparietal activity but decreased insular activity. This study investigated (i) whether the increased frontoparietal and decreased insular activities are, respectively, associated with transient trial-specific processes of death-related linguistic cues and sustained death-related thought during death-relevance judgments on linguistic cues and (ii) whether the neural activity underlying death-related thought can predict individuals’ dispositional death anxiety. Participants were presented with death-related/unrelated words, life-related/unrelated words, and negative-valence/neutral words in separate sessions. Participants were scanned using functional magnetic resonance imaging while performing death-relevance, life-relevance, and valence judgments on the words, respectively. The contrast of death-related vs death-unrelated words during death-relevance judgments revealed transient increased activity in the left inferior parietal lobule, the right frontal eye field, and the right superior parietal lobule. The contrast of death-relevance judgments vs life-relevance/valence judgments showed decreased activity in the bilateral insula. The sustained insular activity was correlated with dispositional death anxiety, but only in those with weak transient frontoparietal responses to death-related words. Our results dissociate the transient and sustained neural responses to death-related linguistic cues and suggest that the combination of the transient and sustained neural activities can predict dispositional death anxiety. PMID:22422804

Exploring Children's Understanding of Death: Through Drawings and the Death Concept Questionnaire

ERIC Educational Resources Information Center

Bonoti, Fotini; Leondari, Angeliki; Mastora, Adelais

2013-01-01

To investigate whether children's understanding of the concept of death varies as a function of death experience and age, 52 children aged 7, 9, and 11 years (26 had a personal death experience), drew a picture reflecting the meaning of the word death and completed the Death Concept Questionnaire for examination of Human and Animal Death. The…

Children's Deaths in Maine, 1976-1980 Final Report.

ERIC Educational Resources Information Center

Shaper, Ruth; And Others

The final report of a statistical study of 1,737 childhood deaths in Maine from 1976-80 by cause and age also looks at distribution of deaths by cause and age in Maine's low-income population. The findings showed disease was the major cause of death (1,068 deaths) followed by accidents (578 deaths), suicide (50 deaths), and homicide (29 deaths).…

Neonatal Death

MedlinePlus

... Home > Complications & Loss > Loss & grief > Neonatal death Neonatal death E-mail to a friend Please fill in ... cope with your baby’s death. What is neonatal death? Neonatal death is when a baby dies in ...

Use of Rapid Ascertainment Process for Institutional Deaths (RAPID) to identify pregnancy-related deaths in tertiary-care obstetric hospitals in three departments in Haiti.

PubMed

Boyd, Andrew T; Hulland, Erin N; Grand'Pierre, Reynold; Nesi, Floris; Honoré, Patrice; Jean-Louis, Reginald; Handzel, Endang

2017-05-16

Accurate assessment of maternal deaths is difficult in countries lacking standardized data sources for their review. As a first step to investigate suspected maternal deaths, WHO suggests surveillance of "pregnancy-related deaths", defined as deaths of women while pregnant or within 42 days of termination of pregnancy, irrespective of cause. Rapid Ascertainment Process for Institutional Deaths (RAPID), a surveillance tool, retrospectively identifies pregnancy-related deaths occurring in health facilities that may be missed by routine surveillance to assess gaps in reporting these deaths. We used RAPID to review pregnancy-related deaths in six tertiary obstetric care facilities in three departments in Haiti. We reviewed registers and medical dossiers of deaths among women of reproductive age occurring in 2014 and 2015 from all wards, along with any additional available dossiers of deaths not appearing in registers, to capture pregnancy status, suspected cause of death, and timing of death in relation to the pregnancy. We used capture-recapture analyses to estimate the true number of in-hospital pregnancy-related deaths in these facilities. Among 373 deaths of women of reproductive age, we found 111 pregnancy-related deaths, 25.2% more than were reported through routine surveillance, and 22.5% of which were misclassified as non-pregnancy-related. Hemorrhage (27.0%) and hypertensive disorders (18.0%) were the most common categories of suspected causes of death, and deaths after termination of pregnancy were statistically significantly more common than deaths during pregnancy or delivery. Data were missing at multiple levels: 210 deaths had an undetermined pregnancy status, 48.7% of pregnancy-related deaths lacked specific information about timing of death in relation to the pregnancy, and capture-recapture analyses in three hospitals suggested that approximately one-quarter of pregnancy-related deaths were not captured by RAPID or routine surveillance. Across six tertiary obstetric care facilities in Haiti, RAPID identified unreported pregnancy-related deaths, and showed that missing data was a widespread problem. RAPID is a useful tool to more completely identify facility-based pregnancy-related deaths, but its repeated use would require a concomitant effort to systematically improve documentation of clinical findings in medical records. Limitations of RAPID demonstrate the need to use it alongside other tools to more accurately measure and address maternal mortality.

Death Attitudes among Mid-Life Women.

ERIC Educational Resources Information Center

Richardson, Virginia; Sands, Roberta

1987-01-01

Examined death attitudes among 74 female college reentry students aged 30 through 49. Found relationships between: (1) developmental factors and death concern, death as interpersonal loss, and death as dimension of time; (2) age and death anticipation; and (3) income and death denial. Results suggest importance of considering both developmental…

[Attitude to death and changes of death image in Hungarian society. Study of the differences in generational value-judgments and of the possibilities of measurement. Is death still a taboo?].

PubMed

Zana, Agnes

2009-06-21

The aim of our research is to examine the sociological, anthropological, and psychological aspects of attitudes towards death; review the different approaches as a complex system; present the altered death image and the changes of tendency; analyze and interpret the most significant anxiety generating factors according to gender, age, and occupation; validate the fear of death and attitudes towards death scales in the Hungarian population; review the possibilities of interventions designed to reduce anxiety generating fear of death. Our hypotheses of our quantitative research were the following: women are characterized by a marked fear of death and anxiety; young people are more afraid of death; health care workers have a higher level death anxiety in comparison to other professionals due to the fact that they are face the suddenness and inevitability of death on daily basis, and this itself is an anxiety generating factor. We validated, adapted and calibrated two psychometric scales measuring fear of death and attitudes towards death. According to our findings, both the Neimeyer and Moore Multidimensional Fear of Death Scale and the Lester Attitude Toward Death Scale proved valid and suitable for measuring fear of death and attitudes towards death. The Hungarian version of the scales proved reliable. In accordance with our hypothesis, young people and women are characterized by higher level of fear of death and anxiety. Our hypothesis, namely that fear of death among health care workers higher as the normal population, was not confirmed. Yet, contrary to a segment of preceding measurements, lower level of fear and anxiety was found.

Walking, cycling and transport safety: an analysis of child road deaths.

PubMed

Sonkin, Beth; Edwards, Phil; Roberts, Ian; Green, Judith

2006-08-01

To examine trends in road death rates for child pedestrians, cyclists and car occupants. Analysis of road traffic injury death rates per 100 000 children and death rates per 10 million passenger miles travelled. England and Wales between 1985 and 2003. Children aged 0-14 years. None. Death rates per 100,000 children and per 10 million child passenger miles for pedestrians, cyclists and car occupants. Death rates per head of population have declined for child pedestrians, cyclists and car occupants but pedestrian death rates remain higher (0.55 deaths/100,000 children; 95% confidence interval [CI] 0.42 to 0.72 deaths) than those for car occupants (0.34 deaths; 95% CI 0.23 to 0.48 deaths) and cyclists (0.16 deaths; 95% CI 0.09 to 0.27 deaths). Since 1985, the average distance children travelled as a car occupant has increased by 70%; the average distance walked has declined by 19%; and the average distance cycled has declined by 58%. Taking into account distance travelled, there are about 50 times more child cyclist deaths (0.55 deaths/10 million passenger miles; 0.32 to 0.89) and nearly 30 times more child pedestrian deaths (0.27 deaths; 0.20 to 0.35) than there are deaths to child car occupants (0.01 deaths; 0.007 to 0.014). In 2003, children from families without access to a vehicle walked twice the distance walked by children in families with access to two or more vehicles. More needs to be done to reduce the traffic injury death rates for child pedestrians and cyclists. This might encourage more walking and cycling and also has the potential to reduce social class gradients in injury mortality.

How the 2008 stock market crash and seasons affect total and cardiac deaths in Los Angeles County.

PubMed

Schwartz, Bryan Glen; Pezzullo, John Christopher; McDonald, Scott Andrew; Poole, William Kenneth; Kloner, Robert Alan

2012-05-15

Various stressors trigger cardiac death. The objective was to investigate a possible relation between a stock market crash and cardiac death in a large population within the United States. We obtained daily stock market data (Dow Jones Industrial Average Index), death certificate data for daily deaths in Los Angeles County (LA), and annual LA population estimates for 2005 through 2008. The 4 years death rate curves (2005 through 2008) were averaged into a single curve to illustrate annual trends. Data were "deseasonalized" by subtracting from the daily observed value the average value for that day of year. There was marked seasonal variation in total and cardiac death rates. Even in the mild LA climate, death rates were higher in winter versus summer including total death (+17%), circulatory death (+24%), coronary heart disease death (+28%), and myocardial infarction death (+38%) rates (p <0.0001 for each). Absolute coronary heart disease death rates have decreased since 1985. After accounting for seasonal variation, the large stock market crash in October 2008 did not affect death rates in LA. Death rates remained at or below seasonal averages during the stock market crash. In conclusion, after correcting for seasonal variation, the stock market crash in October 2008 was not associated with an increase in total or cardiac death in LA. Annual coronary heart disease death rates continue to decrease. However, seasonal variation (specifically winter) remains a trigger for death and coronary heart disease death even in LA where winters are mild. Copyright © 2012 Elsevier Inc. All rights reserved.

Using multiple cause-of-death data to investigate associations and causality between conditions listed on the death certificate.

PubMed

Redelings, Matthew D; Wise, Matthew; Sorvillo, Frank

2007-07-01

Death rarely results from only one cause, and it can be caused by a variety of factors. Multiple cause-of-death data files can list as many as 20 contributing causes of death in addition to the reported underlying cause of death. Analysis of multiple cause-of-death data can provide information on associations between causes of death, revealing common combinations of events or conditions which lead to death. Additionally, physicians report the causal train of events through which they believe that different conditions or events may have led to each other and ultimately caused death. In this paper, the authors discuss methods used in studying associations between reported causes of death and in investigating commonly reported causal pathways between events or conditions listed on the death certificate.

Volatile substance misuse deaths in Washington State, 2003-2012.

PubMed

Ossiander, Eric M

2015-01-01

Volatile substance misuse (VSM - also known as huffing or sniffing) causes some deaths, but because there are no specific cause-of-death codes for VSM, these deaths are rarely tabulated. Count and describe VSM deaths occurring in Washington State during 2003-2012. We used the textual cause-of-death information on death certificates to count VSM-associated deaths that occurred in Washington State during 2003-2012. We extracted records that contained words suggesting either a method of inhalation or a substance commonly used for VSM, and reviewed those records to identify deaths on which the inhalation of a volatile substance was mentioned. We conducted a descriptive analysis of those deaths. Fifty-six deaths involving VSM occurred in Washington State during 2003-2012. VSM deaths occurred primarily among adults age 20 and over (91%), males (88%), and whites (93%). Twelve different chemicals were associated with deaths, but 1 of them, difluoroethane, was named on 30 death certificates (54%), and its involvement increased during the study period. Gas duster products were named as the source of difluoroethane for 12 deaths; no source was named for the other 18 difluoroethane deaths. Most VSM deaths occurred among white male adults, and gas duster products containing difluoroethane were the primary source of inhalants. Approaches to deter VSM, such as the addition of bitterants to gas dusters, should be explored.

FastStats: Leading Causes of Death

MedlinePlus

... Births Teen Births Unmarried Childbearing Deaths Deaths and Mortality Leading Causes of Death Life Expectancy Race and ... Data are for 2015) Related FastStats Deaths and mortality More data Deaths: Final Data for 2015 [PDF – ...

Religiosity and the Construction of Death in Turkish Death Announcements, 1970-2009

ERIC Educational Resources Information Center

Ergin, Murat

2012-01-01

Death and rituals performed after death reflect and reproduce social distinctions despite death's popular reputation as a great leveler. This study examines expressions of religiosity and constructions of death in Turkish death announcements, paying particular attention to gendered, ethnic, and temporal variations as well as markers of status and…

5 CFR 880.205 - Determinations of death.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Determinations of death. 880.205 Section... Determinations of death. OPM does not make findings of presumed death. A claimant for CSRS, FERS, or FEGLI death... § 880.207 must submit a death certificate or other legal certification of death issued by an authorized...

5 CFR 880.205 - Determinations of death.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 5 Administrative Personnel 2 2014-01-01 2014-01-01 false Determinations of death. 880.205 Section... Determinations of death. OPM does not make findings of presumed death. A claimant for CSRS, FERS, or FEGLI death... § 880.207 must submit a death certificate or other legal certification of death issued by an authorized...

5 CFR 880.205 - Determinations of death.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 5 Administrative Personnel 2 2013-01-01 2013-01-01 false Determinations of death. 880.205 Section... Determinations of death. OPM does not make findings of presumed death. A claimant for CSRS, FERS, or FEGLI death... § 880.207 must submit a death certificate or other legal certification of death issued by an authorized...

5 CFR 880.205 - Determinations of death.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 5 Administrative Personnel 2 2011-01-01 2011-01-01 false Determinations of death. 880.205 Section... Determinations of death. OPM does not make findings of presumed death. A claimant for CSRS, FERS, or FEGLI death... § 880.207 must submit a death certificate or other legal certification of death issued by an authorized...

5 CFR 880.205 - Determinations of death.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 5 Administrative Personnel 2 2012-01-01 2012-01-01 false Determinations of death. 880.205 Section... Determinations of death. OPM does not make findings of presumed death. A claimant for CSRS, FERS, or FEGLI death... § 880.207 must submit a death certificate or other legal certification of death issued by an authorized...

Poisoning deaths in Central China (Hubei): A 10-year retrospective study of forensic autopsy cases.

PubMed

Zhou, Lan; Liu, Liang; Chang, Lin; Li, Ling

2011-01-01

A retrospective study of autopsy cases was conducted at the Department of Forensic Medicine, Tongji Medical College (DFM-TMC), in Hubei, China to describe the characteristics of poisoning deaths from 1999 to 2008. A total of 212 poisoning deaths were investigated by DFM-TMC during the 10-year period. The poisoning deaths ranged from 17 cases in 1999 to 27 cases in 2008. Of the 212 cases, 82 deaths (38.7%) were from pesticides, 36 deaths (17.0%) from carbon monoxide, 34 deaths (16.0%) from drugs, 22 deaths (10.4%) from alcohol, 17 deaths (8.0%) from other chemicals, 15 deaths (7.1%) from poisonous plants and animals, and six deaths (2.8%) from heavy metals. Of the 82 pesticide poisoning deaths, 43 (52.4%) cases were caused by rodenticides, mainly tetramine (N = 39). The majority of poisoning deaths were accidents (63.7%), followed by suicides (25.9%) and homicides (3.8%). The manner of death could not be determined in 14 cases (6.6%). © 2010 American Academy of Forensic Sciences.

Death Cafe.

PubMed

Miles, Lizzy; Corr, Charles A

2017-06-01

This article explains the meaning of the phrase Death Cafe and describes what typically occurs at a Death Cafe gathering. The article traces the history of the Death Cafe movement, explores some reasons why people take part in a Death Cafe gathering, and gives examples of what individuals think they might derive from their participation. In addition, this article notes similarities between the Death Cafe movement and three other developments in the field of death, dying, and bereavement. Finally, this article identifies two provisional lessons that can be drawn from Death Cafe gatherings and the Death Cafe movement itself.

Molecular mechanisms of cell death: recommendations of the Nomenclature Committee on Cell Death 2018.

PubMed

Galluzzi, Lorenzo; Vitale, Ilio; Aaronson, Stuart A; Abrams, John M; Adam, Dieter; Agostinis, Patrizia; Alnemri, Emad S; Altucci, Lucia; Amelio, Ivano; Andrews, David W; Annicchiarico-Petruzzelli, Margherita; Antonov, Alexey V; Arama, Eli; Baehrecke, Eric H; Barlev, Nickolai A; Bazan, Nicolas G; Bernassola, Francesca; Bertrand, Mathieu J M; Bianchi, Katiuscia; Blagosklonny, Mikhail V; Blomgren, Klas; Borner, Christoph; Boya, Patricia; Brenner, Catherine; Campanella, Michelangelo; Candi, Eleonora; Carmona-Gutierrez, Didac; Cecconi, Francesco; Chan, Francis K-M; Chandel, Navdeep S; Cheng, Emily H; Chipuk, Jerry E; Cidlowski, John A; Ciechanover, Aaron; Cohen, Gerald M; Conrad, Marcus; Cubillos-Ruiz, Juan R; Czabotar, Peter E; D'Angiolella, Vincenzo; Dawson, Ted M; Dawson, Valina L; De Laurenzi, Vincenzo; De Maria, Ruggero; Debatin, Klaus-Michael; DeBerardinis, Ralph J; Deshmukh, Mohanish; Di Daniele, Nicola; Di Virgilio, Francesco; Dixit, Vishva M; Dixon, Scott J; Duckett, Colin S; Dynlacht, Brian D; El-Deiry, Wafik S; Elrod, John W; Fimia, Gian Maria; Fulda, Simone; García-Sáez, Ana J; Garg, Abhishek D; Garrido, Carmen; Gavathiotis, Evripidis; Golstein, Pierre; Gottlieb, Eyal; Green, Douglas R; Greene, Lloyd A; Gronemeyer, Hinrich; Gross, Atan; Hajnoczky, Gyorgy; Hardwick, J Marie; Harris, Isaac S; Hengartner, Michael O; Hetz, Claudio; Ichijo, Hidenori; Jäättelä, Marja; Joseph, Bertrand; Jost, Philipp J; Juin, Philippe P; Kaiser, William J; Karin, Michael; Kaufmann, Thomas; Kepp, Oliver; Kimchi, Adi; Kitsis, Richard N; Klionsky, Daniel J; Knight, Richard A; Kumar, Sharad; Lee, Sam W; Lemasters, John J; Levine, Beth; Linkermann, Andreas; Lipton, Stuart A; Lockshin, Richard A; López-Otín, Carlos; Lowe, Scott W; Luedde, Tom; Lugli, Enrico; MacFarlane, Marion; Madeo, Frank; Malewicz, Michal; Malorni, Walter; Manic, Gwenola; Marine, Jean-Christophe; Martin, Seamus J; Martinou, Jean-Claude; Medema, Jan Paul; Mehlen, Patrick; Meier, Pascal; Melino, Sonia; Miao, Edward A; Molkentin, Jeffery D; Moll, Ute M; Muñoz-Pinedo, Cristina; Nagata, Shigekazu; Nuñez, Gabriel; Oberst, Andrew; Oren, Moshe; Overholtzer, Michael; Pagano, Michele; Panaretakis, Theocharis; Pasparakis, Manolis; Penninger, Josef M; Pereira, David M; Pervaiz, Shazib; Peter, Marcus E; Piacentini, Mauro; Pinton, Paolo; Prehn, Jochen H M; Puthalakath, Hamsa; Rabinovich, Gabriel A; Rehm, Markus; Rizzuto, Rosario; Rodrigues, Cecilia M P; Rubinsztein, David C; Rudel, Thomas; Ryan, Kevin M; Sayan, Emre; Scorrano, Luca; Shao, Feng; Shi, Yufang; Silke, John; Simon, Hans-Uwe; Sistigu, Antonella; Stockwell, Brent R; Strasser, Andreas; Szabadkai, Gyorgy; Tait, Stephen W G; Tang, Daolin; Tavernarakis, Nektarios; Thorburn, Andrew; Tsujimoto, Yoshihide; Turk, Boris; Vanden Berghe, Tom; Vandenabeele, Peter; Vander Heiden, Matthew G; Villunger, Andreas; Virgin, Herbert W; Vousden, Karen H; Vucic, Domagoj; Wagner, Erwin F; Walczak, Henning; Wallach, David; Wang, Ying; Wells, James A; Wood, Will; Yuan, Junying; Zakeri, Zahra; Zhivotovsky, Boris; Zitvogel, Laurence; Melino, Gerry; Kroemer, Guido

2018-03-01

Over the past decade, the Nomenclature Committee on Cell Death (NCCD) has formulated guidelines for the definition and interpretation of cell death from morphological, biochemical, and functional perspectives. Since the field continues to expand and novel mechanisms that orchestrate multiple cell death pathways are unveiled, we propose an updated classification of cell death subroutines focusing on mechanistic and essential (as opposed to correlative and dispensable) aspects of the process. As we provide molecularly oriented definitions of terms including intrinsic apoptosis, extrinsic apoptosis, mitochondrial permeability transition (MPT)-driven necrosis, necroptosis, ferroptosis, pyroptosis, parthanatos, entotic cell death, NETotic cell death, lysosome-dependent cell death, autophagy-dependent cell death, immunogenic cell death, cellular senescence, and mitotic catastrophe, we discuss the utility of neologisms that refer to highly specialized instances of these processes. The mission of the NCCD is to provide a widely accepted nomenclature on cell death in support of the continued development of the field.

Does superstition help? A study of the role of superstitions and death beliefs on death anxiety amongst Chinese undergraduates in Hong Kong.

PubMed

Wong, Shui Hung

2012-01-01

Past research has shown that traditional Chinese death beliefs, which mostly consisted of superstitious thoughts, are related to death anxiety. However, other studies have shown that superstitions may help people cope with uncertainty and, therefore, reduce uncertainty-induced anxiety. The role of superstitions, whether related to heightened death anxiety or reduced death anxiety, is unclear. This study attempted to address the knowledge gap by examining the relationships among superstitions and Chinese death beliefs on death anxiety in the Chinese context. One hundred twenty-four undergraduates in Hong Kong completed measures of superstition (R-PBS), death anxiety (MFODS), and Chinese death beliefs scale. Superstition was found to be predictor of death anxiety, as expected. With superstitions highly prevalent in Chinese societies, the study has practical implications in end-of-life care, bereavement support, and death education in the Chinese context.

Quality insights of university teachers on dying, death, and death education.

PubMed

Mak, Mui-Hing June

One of the main responsibilities of teachers is to help individual students cope with life difficulties such as grief following a death. However, very little research explores teachers' views on death, dying, and how they handle grief and loss in schools. This study aims to explore university teachers' knowledge and attitudes on dying, death, and death education. Fifteen university teachers were recruited using a qualitative method. This study reveals that most teachers' views on death and related issues are largely affected by their death experiences, religious beliefs, professional background, and the mass media. Although they have a general negative response toward death and dying, some teachers begin to affirm their meanings of life and death. Most teachers agree that they do not feel adequate about managing and teaching on life and death issues, so they strongly support including death education in the formal programs in Hong Kong.

Vaccination and 30-Day Mortality Risk in Children, Adolescents, and Young Adults.

PubMed

McCarthy, Natalie L; Gee, Julianne; Sukumaran, Lakshmi; Weintraub, Eric; Duffy, Jonathan; Kharbanda, Elyse O; Baxter, Roger; Irving, Stephanie; King, Jennifer; Daley, Matthew F; Hechter, Rulin; McNeil, Michael M

2016-03-01

This study evaluates the potential association of vaccination and death in the Vaccine Safety Datalink (VSD). The study cohort included individuals ages 9 to 26 years with deaths between January 1, 2005, and December 31, 2011. We implemented a case-centered method to estimate a relative risk (RR) for death in days 0 to 30 after vaccination.Deaths due to external causes (accidents, homicides, and suicides) were excluded from the primary analysis. In a secondary analysis, we included all deaths regardless of cause. A team of physicians reviewed available medical records and coroner's reports to confirm cause of death and assess the causal relationship between death and vaccination. Of the 1100 deaths identified during the study period, 76 (7%) occurred 0 to 30 days after vaccination. The relative risks for deaths after any vaccination and influenza vaccination were significantly lower for deaths due to nonexternal causes (RR 0.57, 95% confidence interval [CI] 0.38-0.83, and RR 0.44, 95% CI 0.24-0.80, respectively) and deaths due to all causes (RR 0.72, 95% CI 0.56-0.91, and RR 0.44, 95% CI 0.28-0.65). No other individual vaccines were significantly associated with death. Among deaths reviewed, 1 cause of death was unknown, 25 deaths were due to nonexternal causes, and 34 deaths were due to external causes. The causality assessment found no evidence of a causal association between vaccination and death. Risk of death was not increased during the 30 days after vaccination, and no deaths were found to be causally associated with vaccination. Copyright © 2016 by the American Academy of Pediatrics.

Determination of death: Metaphysical and biomedical discourse.

PubMed

Jakušovaitė, Irayda; Luneckaitė, Žydrunė; Peičius, Eimantas; Bagdonaitė, Živilė; Riklikienė, Olga; Stankevičius, Edgaras

2016-01-01

The prominence of biomedical criteria relying on brain death reduces the impact of metaphysical, anthropological, psychosocial, cultural, religious, and legal aspects disclosing the real value and essence of human life. The aim of this literature review is to discuss metaphysical and biomedical approaches toward death and their complimentary relationship in the determination of death. A critical appraisal of theoretical and scientific evidence and legal documents supported analytical discourse. In the metaphysical discourse of death, two main questions about what human death is and how to determine the fact of death clearly separate the ontological and epistemological aspects of death. During the 20th century, various understandings of human death distinguished two different approaches toward the human: the human is a subject of activities or a subject of the human being. Extinction of the difference between the entities and the being, emphasized as rational-logical instrumentation, is not sufficient to understand death thoroughly. Biological criteria of death are associated with biological features and irreversible loss of certain cognitive capabilities. Debating on the question "Does a brain death mean death of a human being?" two approaches are considering: the body-centrist and the mind-centrist. By bridging those two alternatives human death appears not only as biomedical, but also as metaphysical phenomenon. It was summarized that a predominance of clinical criteria for determination of death in practice leads to medicalization of death and limits the holistic perspective toward individual's death. Therefore, the balance of metaphysical and biomedical approaches toward death and its determination would decrease the medicalization of the concept of death. Copyright © 2016 The Lithuanian University of Health Sciences. Production and hosting by Elsevier Urban & Partner Sp. z o.o. All rights reserved.

The epidemiology of 'bewitchment' as a lay-reported cause of death in rural South Africa.

PubMed

Fottrell, Edward; Tollman, Stephen; Byass, Peter; Golooba-Mutebi, Frederick; Kahn, Kathleen

2012-08-01

Cases of premature death in Africa may be attributed to witchcraft. In such settings, medical registration of causes of death is rare. To fill this gap, verbal autopsy (VA) methods record signs and symptoms of the deceased before death as well as lay opinion regarding the cause of death; this information is then interpreted to derive a medical cause of death. In the Agincourt Health and Demographic Surveillance Site, South Africa, around 6% of deaths are believed to be due to 'bewitchment' by VA respondents. Using 6874 deaths from the Agincourt Health and Socio-Demographic Surveillance System, the epidemiology of deaths reported as bewitchment was explored, and using medical causes of death derived from VA, the association between perceptions of witchcraft and biomedical causes of death was investigated. The odds of having one's death reported as being due to bewitchment is significantly higher in children and reproductive-aged women (but not in men) than in older adults. Similarly, sudden deaths or those following an acute illness, deaths occurring before 2001 and those where traditional healthcare was sought are more likely to be reported as being due to bewitchment. Compared with all other deaths, deaths due to external causes are significantly less likely to be attributed to bewitchment, while maternal deaths are significantly more likely to be. Understanding how societies interpret the essential factors that affect their health and how health seeking is influenced by local notions and perceived aetiologies of illness and death could better inform sustainable interventions and health promotion efforts.

The epidemiology of ‘bewitchment’ as a lay-reported cause of death in rural South Africa

PubMed Central

Tollman, Stephen; Byass, Peter; Golooba-Mutebi, Frederick; Kahn, Kathleen

2011-01-01

Background Cases of premature death in Africa may be attributed to witchcraft. In such settings, medical registration of causes of death is rare. To fill this gap, verbal autopsy (VA) methods record signs and symptoms of the deceased before death as well as lay opinion regarding the cause of death; this information is then interpreted to derive a medical cause of death. In the Agincourt Health and Demographic Surveillance Site, South Africa, around 6% of deaths are believed to be due to ‘bewitchment’ by VA respondents. Methods Using 6874 deaths from the Agincourt Health and Socio-Demographic Surveillance System, the epidemiology of deaths reported as bewitchment was explored, and using medical causes of death derived from VA, the association between perceptions of witchcraft and biomedical causes of death was investigated. Results The odds of having one's death reported as being due to bewitchment is significantly higher in children and reproductive-aged women (but not in men) than in older adults. Similarly, sudden deaths or those following an acute illness, deaths occurring before 2001 and those where traditional healthcare was sought are more likely to be reported as being due to bewitchment. Compared with all other deaths, deaths due to external causes are significantly less likely to be attributed to bewitchment, while maternal deaths are significantly more likely to be. Conclusions Understanding how societies interpret the essential factors that affect their health and how health seeking is influenced by local notions and perceived aetiologies of illness and death could better inform sustainable interventions and health promotion efforts. PMID:21515546

Elements of healthy death: a thematic analysis.

PubMed

Estebsari, Fatemeh; Taghdisi, Mohammad Hossein; Mostafaei, Davood; Rahimi, Zahra

2017-01-01

Background: Death is a natural and frightening phenomenon, which is inevitable. Previous studies on death, which presented a negative and tedious image of this process, are now being revised and directed towards acceptable death and good death. One of the proposed terms about death and dying is "healthy death", which encourages dealing with death positively and leading a lively and happy life until the last moment. This study aimed to explain the views of Iranians about the elements of healthy death. Methods: This qualitative study was conducted for 12 months in two general hospitals in Tehran (capital of Iran), using the thematic analysis method. After conducting 23 in-depth interviews with 21 participants, transcription of content, and data immersion and analysis, themes, as the smallest meaningful units were extracted, encoded and classified. Results: One main category of healthy death with 10 subthemes, including dying at the right time, dying without hassle, dying without cost, dying without dependency and control, peaceful death, not having difficulty at dying, not dying alone and dying at home, inspired death, preplanned death, and presence of a clergyman or a priest, were extracted as the elements of healthy death from the perspective of the participants in this study. Conclusion: The study findings well explained the elements of healthy death. Paying attention to the conditions and factors causing healthy death by professionals and providing and facilitating quality services for patients in the end stage of life make it possible for patients to experience a healthy death.

Causes of adult female deaths in Bangladesh: findings from two National Surveys.

PubMed

Nahar, Quamrun; El Arifeen, Shams; Jamil, Kanta; Streatfield, Peter Kim

2015-09-18

Assessment of causes of death and changes in pattern of causes of death over time are needed for programmatic purposes. Limited national level data exist on the adult female causes of death in Bangladesh. Using data from two nationally representation surveys, the 2001 and 2010 Bangladesh Maternal Mortality Surveys (BMMS), the paper examines the causes of adult female death, aged 15-49 years, and changes in the patterns of these deaths. In both surveys, all household deaths three years prior to the survey were identified. Adult female deaths were then followed by a verbal autopsy (VA) using the WHO structured questionnaire. Two physicians independently reviewed the VA forms to assign a cause of death using the ICD-10; in case of disagreement, a third physician made an independent review and assigned a cause of death. The overall mortality rates for women aged 15-49 in 2001 and 2010 were 182 per 100,000 and 120 per 100,000 respectively. There is a shift in the pattern of causes of death during the period covered by the two surveys. In the 2001 survey, the main causes of death were maternal (20 %), followed by diseases of the circulatory system (15 %), malignancy (14 %) and infectious diseases (13 %). However, in the 2010 survey, malignancies were the leading cause (21 %), followed by diseases of the circulatory system (16 %), maternal causes (14 %) and infectious diseases (8 %). While maternal deaths remained the number one cause of death among 20-34 years old in both surveys, unnatural deaths were the main cause for teenage deaths, and malignancies were the main cause of death for older women. Although there is an increasing trend in the proportion of women who died in hospitals, in both surveys most women died at home (74 % in 2001 and 62 % in 2010). The shift in the pattern of causes of adult female deaths is in agreement with the overall change in the disease pattern from communicable to non-communicable diseases in Bangladesh. Suicide and other violent deaths as the primary cause of deaths among teenage girls demands specific interventions to prevent such premature deaths. Prevention of deaths due to non-communicable diseases should also be a priority.

Aging and Death Education.

ERIC Educational Resources Information Center

Pinder, Margaret M.; Hayslip, Bert, Jr.

1980-01-01

The elderly death rate is somewhat higher than the death rate in general. Numbers of schools with gerontological curricula and frequency of death education courses are positively related to elderly death rates. The contention that elderly deaths have less social impact is not supported. (JAC)

Death Preparation of Chinese Rural Elders.

PubMed

Liu, Yanping; van Schalkwyk, Gertina J

2018-05-14

In this qualitative study, we explored how Chinese rural elders narrate death-related issues and death preparation. Adopting a phenomenological approach, we interviewed 14 participants regarding the particular actions they employ to prepare for death. The findings revealed a death preparation system for rural Chinese elders that is instrumental in how they converse about death, wish for a good death, make objects and symbols, and anticipate an afterlife as a worshiped ancestor rather than a wandering ghost. Family and family honour provide the context for death preparation. We discuss implications and the need for the death preparation education of younger generations.

Using maps and funnel plots to explore variation in place of death from cancer within London, 2002-2007.

PubMed

Madden, P; Coupland, Vh; Møller, H; Davies, Ea

2011-06-01

London has a high proportion of hospital deaths, which health policy seeks to reduce. We explore variation and trends in place of death from cancer within London between 2002 and 2007. Mortality data based on death certificates were used to define deaths from cancer at home, hospice, hospital and nursing home and examine trends over time for London. Proportions of deaths in each place were presented in maps for 31 London primary care trusts (PCTs). Funnel plots were used to identify consistent performance outside the control limits of three standard deviations. There was little overall change in place of death for London, but consistent variation between PCTs. Outer London PCTs had higher proportions of home deaths and inner London PCTs higher proportions of hospice deaths. Funnel plots identified consistent high outlying performance for home, hospice and hospital deaths. No PCT showed a change of 10% or more in home deaths, but five showed decreasing hospital deaths and three increasing hospice deaths. Maps and funnel plots appear useful for identifying areas with differing performance for home, hospital, nursing home and hospice deaths. These methods may help further investigation of how local services may successfully support deaths outside hospital. © The Author(s) 2011

Drugs Most Frequently Involved in Drug Overdose Deaths: United States, 2010-2014.

PubMed

Warner, Margaret; Trinidad, James P; Bastian, Brigham A; Minino, Arialdi M; Hedegaard, Holly

2016-12-01

Objectives-This report identifies the specific drugs most frequently involved in drug overdose deaths in the United States from 2010 through 2014. Methods-The 2010-2014 National Vital Statistics System mortality files were linked to electronic files containing literal text information from death certificates. Drug overdose was defined using the International Classification of Diseases, Tenth Revision underlying cause-of-death codes X40-X44 (unintentional), X60-X64 (suicide), X85 (homicide), and Y10-Y14 (undetermined intent). Among deaths with an underlying cause of death of drug overdose, the literal text in three fields of the death certificate (i.e., the cause of death from Part I, significant conditions contributing to death from Part II, and a description of how the injury occurred from Box 43) were searched to identify drug mentions. Search term lists were developed using existing drug classification systems as well as from manual review of the literal text. The search term list was then used to identify the specific drugs involved in overdose deaths. Descriptive statistics were reported for drug overdose deaths involving the 10 most frequently mentioned drugs on death certificates. Tables and figures presenting information on the specific drugs involved in deaths are based on deaths with mention of at least one specific drug on the death certificate. Results-From 2010 through 2014, the number of drug overdose deaths per year increased 23%, from 38,329 in 2010 to 47,055 in 2014. During this time period, the percentage of drug overdose deaths involving at least one specific drug increased, from 67% in 2010 to 78% in 2014. Among drug overdose deaths with at least one drug specified on the death certificate, the 10 drugs most frequently involved in overdose deaths included the following opioids: heroin, oxycodone, methadone, morphine, hydrocodone, and fentanyl; the following benzodiazepines: alprazolam and diazepam; and the following stimulants: cocaine and methamphetamine. During this 5-year period, the age-adjusted rate of drug overdose deaths involving heroin more than tripled, and the rate of drug overdose deaths involving methamphetamine more than doubled. The rate of drug overdose deaths involving fentanyl more than doubled in a single year (from 2013 to 2014). In 2014, of the 36,667 drug overdose deaths involving at least one specific drug, 52% of these deaths specified one drug, 38% specified two or three drugs, and 11% specified four or more drugs. Conclusions-Analysis of the literal text from death certificates can be used to identify patterns in the specific drugs most frequently involved in drug overdose deaths. From 2010 through 2014, the top 10 drugs involved were the same, but the relative ranking and age-adjusted rates for deaths involving these drugs changed. Literal text analysis also revealed that many drug overdose deaths involved multiple drugs. Findings should be interpreted in light of the improvement in the quality of the data that resulted from better reporting of specific drugs on death certificates from 2010 through 2014. Relative increases in the death rates involving specific drugs and the rankings of these drugs may be affected by improvements in reporting, real increases in the numbers of death, or both. All material appearing in this report is in the public domain and may be reproduced or copied without permission; citation as to source, however, is appreciated.

Causes of Mortality for Indonesian Hajj Pilgrims: Comparison between Routine Death Certificate and Verbal Autopsy Findings

PubMed Central

Pane, Masdalina; Imari, Sholah; Alwi, Qomariah; Nyoman Kandun, I; Cook, Alex R.; Samaan, Gina

2013-01-01

Background Indonesia provides the largest single source of pilgrims for the Hajj (10%). In the last two decades, mortality rates for Indonesian pilgrims ranged between 200–380 deaths per 100,000 pilgrims over the 10-week Hajj period. Reasons for high mortality are not well understood. In 2008, verbal autopsy was introduced to complement routine death certificates to explore cause of death diagnoses. This study presents the patterns and causes of death for Indonesian pilgrims, and compares routine death certificates to verbal autopsy findings. Methods Public health surveillance was conducted by Indonesian public health authorities accompanying pilgrims to Saudi Arabia, with daily reporting of hospitalizations and deaths. Surveillance data from 2008 were analyzed for timing, geographic location and site of death. Percentages for each cause of death category from death certificates were compared to that from verbal autopsy. Results In 2008, 206,831 Indonesian undertook the Hajj. There were 446 deaths, equivalent to 1,968 deaths per 100,000 pilgrim years. Most pilgrims died in Mecca (68%) and Medinah (24%). There was no statistically discernible difference in the total mortality risk for the two pilgrimage routes (Mecca or Medinah first), but the number of deaths peaked earlier for those traveling to Mecca first (p=0.002). Most deaths were due to cardiovascular (66%) and respiratory (28%) diseases. A greater proportion of deaths were attributed to cardiovascular disease by death certificate compared to the verbal autopsy method (p<0.001). Significantly more deaths had ill-defined cause based on verbal autopsy method (p<0.001). Conclusions Despite pre-departure health screening and other medical services, Indonesian pilgrim mortality rates were very high. Correct classification of cause of death is critical for the development of risk mitigation strategies. Since verbal autopsy classified causes of death differently to death certificates, further studies are needed to assess the method’s utility in this setting. PMID:23991182

Tuberculosis and HIV are the leading causes of adult death in northwest Ethiopia: evidence from verbal autopsy data of Dabat health and demographic surveillance system, 2007-2013.

PubMed

Kebede, Yigzaw; Andargie, Gashaw; Gebeyehu, Abebaw; Awoke, Tadesse; Yitayal, Mezgebu; Mekonnen, Solomon; Wubshet, Mamo; Azmeraw, Temesgen; Lakew, Yihunie; Alemu, Kassahun

2017-01-01

Reliable data on causes of death form the basis for building evidence on health policy, planning, monitoring, and evaluation. In Ethiopia, the majority of deaths occur at home and civil registration systems are not yet functional. The main objective of verbal autopsy (VA) is to describe the causes of death at the community or population level where civil registration and death certification systems are weak and where most people die at home without having had contact with the health system. Causes of death were classified and prepared based on the International Classification of Diseases (ICD-10). The cause of a death was ascertained based on an interview with next of kin or other caregivers using a standardized questionnaire that draws information on signs, symptoms, medical history, and circumstances preceding death. The cause of death, or the sequence of causes that led to death, is assigned based on the data collected by the questionnaire. The complete VA questionnaires were given to two blinded physicians and reviewed independently. A third physician was assigned to review the case when disagreements in diagnosis arose. Communicable diseases (519 deaths [48.0%]), non-communicable diseases (377 deaths [34.8%]), and external causes (113 deaths [10.4%]) were the main causes of death between 2007 and 2013. Of communicable diseases, tuberculosis (207 deaths [19.7%]), HIV/AIDS (96 deaths [8.9%]) and meningitis (76 deaths [7.0%]) were the most common causes of death. Tuberculosis, HIV/AIDS, and meningitis were the most common causes of deaths among adults. Death due to non-communicable diseases showed an increasing trend. Increasing community awareness of infections and their interrelationships, tuberculosis case finding, effective local TB programs, successful treatment, and interventions for HIV are supremely important.

Tuberculosis and HIV are the leading causes of adult death in northwest Ethiopia: evidence from verbal autopsy data of Dabat health and demographic surveillance system, 2007-2013.

PubMed

Kebede, Yigzaw; Andargie, Gashaw; Gebeyehu, Abebaw; Awoke, Tadesse; Yitayal, Mezgebu; Mekonnen, Solomon; Wubshet, Mamo; Azmeraw, Temesgen; Lakew, Yihunie; Alemu, Kassahun

2017-07-17

Reliable data on causes of death form the basis for building evidence on health policy, planning, monitoring, and evaluation. In Ethiopia, the majority of deaths occur at home and civil registration systems are not yet functional. The main objective of verbal autopsy (VA) is to describe the causes of death at the community or population level where civil registration and death certification systems are weak and where most people die at home without having had contact with the health system. Causes of death were classified and prepared based on the International Classification of Diseases (ICD-10). The cause of a death was ascertained based on an interview with next of kin or other caregivers using a standardized questionnaire that draws information on signs, symptoms, medical history, and circumstances preceding death. The cause of death, or the sequence of causes that led to death, is assigned based on the data collected by the questionnaire. The complete VA questionnaires were given to two blinded physicians and reviewed independently. A third physician was assigned to review the case when disagreements in diagnosis arose. Communicable diseases (519 deaths [48.0%]), non-communicable diseases (377 deaths [34.8%]), and external causes (113 deaths [10.4%]) were the main causes of death between 2007 and 2013. Of communicable diseases, tuberculosis (207 deaths [19.7%]), HIV/AIDS (96 deaths [8.9%]) and meningitis (76 deaths [7.0%]) were the most common causes of death. Tuberculosis, HIV/AIDS, and meningitis were the most common causes of deaths among adults. Death due to non-communicable diseases showed an increasing trend. Increasing community awareness of infections and their interrelationships, tuberculosis case finding, effective local TB programs, successful treatment, and interventions for HIV are supremely important.

Life Experience with Death: Relation to Death Attitudes and to the Use of Death-Related Memories

ERIC Educational Resources Information Center

Bluck, Susan; Dirk, Judith; Mackay, Michael M.; Hux, Ashley

2008-01-01

The study examines the relation of death experience to death attitudes and to autobiographical memory use. Participants (N = 52) completed standard death attitude measures and wrote narratives about a death-related autobiographical memory and (for comparison) a memory of a low point. Self-ratings of the memory narratives were used to assess their…

Potentially Preventable Deaths Among the Five Leading Causes of Death - United States, 2010 and 2014.

PubMed

García, Macarena C; Bastian, Brigham; Rossen, Lauren M; Anderson, Robert; Miniño, Arialdi; Yoon, Paula W; Faul, Mark; Massetti, Greta; Thomas, Cheryll C; Hong, Yuling; Iademarco, Michael F

2016-11-18

Death rates by specific causes vary across the 50 states and the District of Columbia.* Information on differences in rates for the leading causes of death among states might help state health officials determine prevention goals, priorities, and strategies. CDC analyzed National Vital Statistics System data to provide national and state-specific estimates of potentially preventable deaths among the five leading causes of death in 2014 and compared these estimates with estimates previously published for 2010. Compared with 2010, the estimated number of potentially preventable deaths changed (supplemental material at https://stacks.cdc.gov/view/cdc/42472); cancer deaths decreased 25% (from 84,443 to 63,209), stroke deaths decreased 11% (from 16,973 to 15,175), heart disease deaths decreased 4% (from 91,757 to 87,950), chronic lower respiratory disease (CLRD) (e.g., asthma, bronchitis, and emphysema) deaths increased 1% (from 28,831 to 29,232), and deaths from unintentional injuries increased 23% (from 36,836 to 45,331). A better understanding of progress made in reducing potentially preventable deaths in the United States might inform state and regional efforts targeting the prevention of premature deaths from the five leading causes in the United States.

Adverse medical complications: an under-reported contributory cause of death in New York City.

PubMed

Gill, J R; Ely, S F; Toriello, A; Hirsch, C S

2014-04-01

The current death certification system in the USA fails to accurately track deaths due to adverse medical events. The aim of this study was to demonstrate the under-reporting of deaths due to adverse medical events due to limitations in the current death certification/reporting system, and the benefits of using the term 'therapeutic complication' as the manner of death. Retrospective review and comparison of death certificates and vital statistical coding. The manner of death is certified as a therapeutic complication when death is caused by predictable complications of appropriate therapy, and would not have occurred but for the medical intervention. Based on medical examiner records, complications that caused or contributed to deaths over a five-year period were examined retrospectively. These fatalities were compared with deaths coded as medical and surgical complications by the New York City Bureau of Vital Statistics. The Medical Examiner's Office certified 2471 deaths as therapeutic complications and 312 deaths as accidents occurring in healthcare facilities. In contrast, the New York City Bureau of Vital Statistics reported 188 deaths due to complications of medical and surgical care. Use of the term 'therapeutic complication' as the manner of death identified nearly 14 times more deaths than were reported by the New York City Bureau of Vital Statistics. If these therapeutic complications and medical accidents were considered as a 'disease', they would rank as the 10th leading cause of death in New York City, surpassing homicides and suicides in some years. Nationwide policy shifts that use the term 'therapeutic complication' would improve the capture and reporting of these deaths, thus allowing better identification of fatal adverse medical events in order to focus on and assess preventative strategies. Copyright © 2013 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Exposing misclassified HIV/AIDS deaths in South Africa.

PubMed

Birnbaum, Jeanette Kurian; Murray, Christopher Jl; Lozano, Rafael

2011-04-01

To quantify the deaths from human immunodeficiency virus (HIV) infection or acquired immunodeficiency syndrome (AIDS) that are misattributed to other causes in South Africa's death registration data and to adjust for this bias. Deaths in the World Health Organization's mortality database were distributed among 48 mutually exclusive causes. For each cause, age- and sex-specific global death rates were compared with the average rate among people aged 65-69, 70-74 and 75-79 years to generate "relative" global death rates. Relative rates were also computed for South Africa alone. Differences between global and South African relative death rates were used to identify the causes to which deaths from HIV/AIDS were misattributed in South Africa and quantify the HIV/AIDS deaths misattributed to each. These deaths were then reattributed to HIV/AIDS. In South Africa, deaths from HIV/AIDS are often misclassified as being caused by 14 other conditions. Whereas in 1996-2006 deaths attributed to HIV/AIDS accounted for 2.0-2.5% of all registered deaths in South Africa, our analysis shows that the true cause-specific mortality fraction rose from 19% (uncertainty range: 7-28%) to 48% (uncertainty range: 38-50%) over that period. More than 90% of HIV/AIDS deaths were found to have been misattributed to other causes during 1996-2006. Adjusting for cause of death misclassification, a simple procedure that can be carried out in any country, can improve death registration data and provide empirical estimates of HIV/AIDS deaths that may be useful in assessing estimates from demographic models.

A scoping research literature review to assess the state of existing evidence on the "bad" death.

PubMed

Wilson, Donna M; Hewitt, Jessica A

2018-02-01

A scoping research literature review on "bad death" was undertaken to assess the overall state of the science on this topic and to determine what evidence exists on how often bad deaths occur, what contributes to or causes a bad death, and what the outcomes and consequences of bad deaths are. A search for English-language research articles was conducted in late 2016, with 25 articles identified and all retained for examination, as is expected with scoping reviews. Only 3 of the 25 articles provided incidence information, specifying that 7.8 to 23% of deaths were bad and that bad deaths were more likely to occur in hospitals than in community-care settings. Many different factors were associated with bad deaths, with unrelieved pain being the most commonly identified. Half of the studies provided information on the possible consequences or outcomes of bad deaths, such as palliative care not being initiated, interpersonal and team conflict, and long-lasting negative community effects. This review identified a relatively small number of research articles that focused in whole or in part on bad deaths. Although the reasons why people consider a death to be bad may be highly individualized and yet also socioculturally based, unrelieved pain is a commonly held reason for bad deaths. Although bad and good deaths may have some opposing causative factors, this literature review revealed some salient bad death attributes, ones that could be avoided to prevent bad deaths from occurring. A routine assessment to allow planning so as to avoid bad deaths and enhance the probability of good deaths is suggested.

Pitfalls of national routine death statistics for maternal mortality study.

PubMed

Saucedo, Monica; Bouvier-Colle, Marie-Hélène; Chantry, Anne A; Lamarche-Vadel, Agathe; Rey, Grégoire; Deneux-Tharaux, Catherine

2014-11-01

The lessons learned from the study of maternal deaths depend on the accuracy of data. Our objective was to assess time trends in the underestimation of maternal mortality (MM) in the national routine death statistics in France and to evaluate their current accuracy for the selection and causes of maternal deaths. National data obtained by enhanced methods in 1989, 1999, and 2007-09 were used as the gold standard to assess time trends in the underestimation of MM ratios (MMRs) in death statistics. Enhanced data and death statistics for 2007-09 were further compared by characterising false negatives (FNs) and false positives (FPs). The distribution of cause-specific MMRs, as assessed by each system, was described. Underestimation of MM in death statistics decreased from 55.6% in 1989 to 11.4% in 2007-09 (P < 0.001). In 2007-09, of 787 pregnancy-associated deaths, 254 were classified as maternal by the enhanced system and 211 by the death statistics; 34% of maternal deaths in the enhanced system were FNs in the death statistics, and 20% of maternal deaths in the death statistics were FPs. The hierarchy of causes of MM differed between the two systems. The discordances were mainly explained by the lack of precision in the drafting of death certificates by clinicians. Although the underestimation of MM in routine death statistics has decreased substantially over time, one third of maternal deaths remain unidentified, and the main causes of death are incorrectly identified in these data. Defining relevant priorities in maternal health requires the use of enhanced methods for MM study. © 2014 John Wiley & Sons Ltd.

[Detection of underlying causes of death among the deceased of Yusho patients by linkage to the national vital statistics data].

PubMed

Kaneko, S; Yoshimura, T; Ikeda, M; Nishisaka, K

2001-05-01

As of January 31, 1996, 292 deaths among registered patients of Yusho were identified by three follow-up studies conducted in 1986, 1990, and 1996. In this study, we attempted to identify underlying causes of death by linkage of the registered data to the National Vital Statistics Data provided by the Management and Coordination Agency of Japan, which included 15 million deaths between 1978 and 1996. The two datasets were linked by matching for six variables; birth year/month/day, death year/month, and sex, along with a variable of death day or death place, or both. The matched cases were 203 among 235 deaths between 1978 and 1996 (matching rate was 86%). Among the 203 deaths, 58 underlying causes of death were newly identified, 146 causes of death were already grasped by the follow-up studies, and 31 deaths did not have matching pair in the National Vital Statistics data. Among the 146 deaths, 110 causes of death were concordant with each other, however, 35 causes of death were completely discord. The reason of the discordance and the unmatched deaths might be due to difference in information of the matching variables in the two datasets. In order to conduct an efficient follow-up study of Yusho patients, identification of underlying causes of death by linkage to the National Vital Statistics Date is evitable. For that, we need to substitute basic information in the Yusho database to those compatible to the National civil registration system.

Brainstem death: A comprehensive review in Indian perspective

PubMed Central

Dhanwate, Anant Dattatray

2014-01-01

With the advent of cardiopulmonary resuscitation techniques, the cardiopulmonary definition of death lost its significance in favor of brain death. Brain death is a permanent cessation of all functions of the brain in which though individual organs may function but lack of integrating function of the brain, lack of respiratory drive, consciousness, and cognition confirms to the definition that death is an irreversible cessation of functioning of the organism as a whole. In spite of medical and legal acceptance globally, the concept of brain death and brain-stem death is still unclear to many. Brain death is not promptly declared due to lack of awareness and doubts about the legal procedure of certification. Many brain dead patients are kept on life supporting systems needlessly. In this comprehensive review, an attempt has been made to highlight the history and concept of brain death and brain-stem death; the anatomical and physiological basis of brain-stem death, and criteria to diagnose brain-stem death in India. PMID:25249744

Maternal mortality in Syria: causes, contributing factors and preventability.

PubMed

Bashour, Hyam; Abdulsalam, Asmaa; Jabr, Aisha; Cheikha, Salah; Tabbaa, Mohammed; Lahham, Moataz; Dihman, Reem; Khadra, Mazen; Campbell, Oona M R

2009-09-01

To describe the biomedical and other causes of maternal death in Syria and to assess their preventability. A reproductive age mortality study (RAMOS) design was used to identify pregnancy related deaths. All deaths among women aged 15-49 reported to the national civil register for 2003 were investigated through home interviews. Verbal autopsies were used to ascertain the cause of death among pregnancy related maternal deaths, and causes and preventability of deaths were assessed by a panel of doctors. A total of 129 maternal deaths were identified and reviewed. Direct medical causes accounted for 88%, and haemorrhage was the main cause of death (65%). Sixty nine deaths (54%) occurred during labour or delivery. Poor clinical skills and lack of clinical competency were behind 54% of maternal deaths. Ninety one percent of maternal deaths were preventable. The causes of maternal death in Syria and their contributing factors reflect serious defects in the quality of maternal care that need to be urgently rectified.

Cell Death and Cell Death Responses in Liver Disease: Mechanisms and Clinical Relevance

PubMed Central

Luedde, Tom; Kaplowitz, Neil; Schwabe, Robert F.

2015-01-01

Summary Hepatocellular death is present in almost all types of human liver disease and is used as a sensitive parameter for the detection of acute and chronic liver disease of viral, toxic, metabolic, or autoimmune origin. Clinical data and animal models suggest that hepatocyte death is the key trigger of liver disease progression, manifested by the subsequent development of inflammation, fibrosis, cirrhosis, and hepatocellular carcinoma. Modes of hepatocellular death differ substantially between liver diseases. Different modes of cell death such as apoptosis, necrosis, and necroptosis trigger specific cell death responses and promote progression of liver disease through distinct mechanisms. In this review, we first discuss molecular mechanisms by which different modes of cell death, damage-associated molecular patterns, and specific cell death responses contribute to the development of liver disease. We then review the clinical relevance of cell death, focusing on biomarkers; the contribution of cell death to drug-induced, viral, and fatty liver disease and liver cancer; and evidence for cell death pathways as therapeutic targets. PMID:25046161

Leading Causes of Death in Nonmetropolitan and Metropolitan Areas— United States, 1999–2014

PubMed Central

Garcia, Macarena C.; Bastian, Brigham; Rossen, Lauren M.; Ingram, Deborah D.; Faul, Mark; Massetti, Greta M.; Thomas, Cheryll C.; Hong, Yuling; Yoon, Paula W.; Iademarco, Michael F.

2017-01-01

Problem/Condition Higher rates of death in nonmetropolitan areas (often referred to as rural areas) compared with metropolitan areas have been described but not systematically assessed. Period Covered 1999–2014 Description of System Mortality data for U.S. residents from the National Vital Statistics System were used to calculate age-adjusted death rates and potentially excess deaths for nonmetropolitan and metropolitan areas for the five leading causes of death. Age-adjusted death rates included all ages and were adjusted to the 2000 U.S. standard population by the direct method. Potentially excess deaths are defined as deaths among persons aged <80 years that exceed the numbers that would be expected if the death rates of states with the lowest rates (i.e., benchmark states) occurred across all states. (Benchmark states were the three states with the lowest rates for each cause during 2008–2010.) Potentially excess deaths were calculated separately for nonmetropolitan and metropolitan areas. Data are presented for the United States and the 10 U.S. Department of Health and Human Services public health regions. Results Across the United States, nonmetropolitan areas experienced higher age-adjusted death rates than metropolitan areas. The percentages of potentially excess deaths among persons aged <80 years from the five leading causes were higher in nonmetropolitan areas than in metropolitan areas. For example, approximately half of deaths from unintentional injury and chronic lower respiratory disease in nonmetropolitan areas were potentially excess deaths, compared with 39.2% and 30.9%, respectively, in metropolitan areas. Potentially excess deaths also differed among and within public health regions; within regions, nonmetropolitan areas tended to have higher percentages of potentially excess deaths than metropolitan areas. Interpretation Compared with metropolitan areas, nonmetropolitan areas have higher age-adjusted death rates and greater percentages of potentially excess deaths from the five leading causes of death, nationally and across public health regions. Public Health Action Routine tracking of potentially excess deaths in nonmetropolitan areas might help public health departments identify emerging health problems, monitor known problems, and focus interventions to reduce preventable deaths in these areas. PMID:28081058

Leading Causes of Death in Nonmetropolitan and Metropolitan Areas- United States, 1999-2014.

PubMed

Moy, Ernest; Garcia, Macarena C; Bastian, Brigham; Rossen, Lauren M; Ingram, Deborah D; Faul, Mark; Massetti, Greta M; Thomas, Cheryll C; Hong, Yuling; Yoon, Paula W; Iademarco, Michael F

2017-01-13

Higher rates of death in nonmetropolitan areas (often referred to as rural areas) compared with metropolitan areas have been described but not systematically assessed. 1999-2014 DESCRIPTION OF SYSTEM: Mortality data for U.S. residents from the National Vital Statistics System were used to calculate age-adjusted death rates and potentially excess deaths for nonmetropolitan and metropolitan areas for the five leading causes of death. Age-adjusted death rates included all ages and were adjusted to the 2000 U.S. standard population by the direct method. Potentially excess deaths are defined as deaths among persons aged <80 years that exceed the numbers that would be expected if the death rates of states with the lowest rates (i.e., benchmark states) occurred across all states. (Benchmark states were the three states with the lowest rates for each cause during 2008-2010.) Potentially excess deaths were calculated separately for nonmetropolitan and metropolitan areas. Data are presented for the United States and the 10 U.S. Department of Health and Human Services public health regions. Across the United States, nonmetropolitan areas experienced higher age-adjusted death rates than metropolitan areas. The percentages of potentially excess deaths among persons aged <80 years from the five leading causes were higher in nonmetropolitan areas than in metropolitan areas. For example, approximately half of deaths from unintentional injury and chronic lower respiratory disease in nonmetropolitan areas were potentially excess deaths, compared with 39.2% and 30.9%, respectively, in metropolitan areas. Potentially excess deaths also differed among and within public health regions; within regions, nonmetropolitan areas tended to have higher percentages of potentially excess deaths than metropolitan areas. Compared with metropolitan areas, nonmetropolitan areas have higher age-adjusted death rates and greater percentages of potentially excess deaths from the five leading causes of death, nationally and across public health regions. Routine tracking of potentially excess deaths in nonmetropolitan areas might help public health departments identify emerging health problems, monitor known problems, and focus interventions to reduce preventable deaths in these areas.

[Analysis of death causes among infants in Guangzhou from 2010 to 2013].

PubMed

Shen, Jichuan; Wang, Ming; Dong, Hang; Zhou, Qin

2014-06-01

To analyze the main death causes among infants in Guangzhou in 2010-2013 and to provide an objective and scientific basis for risk communication of public health emergencies in the future. Descriptive epidemiological method was used to analyze the death causes among infants reported in Guangzhou from the National Death Registration Reporting Information System. The death causes among infants were classified by the 10th international classification of diseases (ICD-10). The constitution and rank order of death causes among infants were analyzed according to the underlying causes of deaths. A total of 4 880 cases of infant deaths were reported in Guangzhou from 2010 to 2013 and infant deaths in floating population were 1.8 (3 135/1 745) times of registered population. The deaths of male infants were 1.73 (3 094/1 786) times of female infants. The neonatal group accounted for 52.32% (2 553/4 880) of total infant deaths and early neonatal group accounted for 64.86% (1 656/2 553) of total neonatal deaths. The top five causes of infant deaths followed by perinatal diseases, congenital malformations, respiratory diseases (mainly pneumonia), accidental deaths and communicable diseases. The mortality ratios were respectively 44.12% (2 153 cases) , 24.73% (1 207 cases), 6.86% (335 cases), 3.48% (170 cases), 3.01% (147 cases) , and no vaccine-related death case was reported. The primary cause of infant deaths in Guangzhou 2010-2013 was perinatal diseases.

Life Expectancy and Cause of Death in Popular Musicians: Is the Popular Musician Lifestyle the Road to Ruin?

PubMed

Kenny, Dianna T; Asher, Anthony

2016-03-01

Does a combination of lifestyle pressures and personality, as reflected in genre, lead to the early death of popular musicians? We explored overall mortality, cause of death, and changes in patterns of death over time and by music genre membership in popular musicians who died between 1950 and 2014. The death records of 13,195 popular musicians were coded for age and year of death, cause of death, gender, and music genre. Musician death statistics were compared with age-matched deaths in the US population using actuarial methods. Although the common perception is of a glamorous, free-wheeling lifestyle for this occupational group, the figures tell a very different story. Results showed that popular musicians have shortened life expectancy compared with comparable general populations. Results showed excess mortality from violent deaths (suicide, homicide, accidental death, including vehicular deaths and drug overdoses) and liver disease for each age group studied compared with population mortality patterns. These excess deaths were highest for the under-25-year age group and reduced chronologically thereafter. Overall mortality rates were twice as high compared with the population when averaged over the whole age range. Mortality impacts differed by music genre. In particular, excess suicides and liver-related disease were observed in country, metal, and rock musicians; excess homicides were observed in 6 of the 14 genres, in particular hip hop and rap musicians. For accidental death, actual deaths significantly exceeded expected deaths for country, folk, jazz, metal, pop, punk, and rock.

System care improves trauma outcome: patient care errors dominate reduced preventable death rate.

PubMed

Thoburn, E; Norris, P; Flores, R; Goode, S; Rodriguez, E; Adams, V; Campbell, S; Albrink, M; Rosemurgy, A

1993-01-01

A review of 452 trauma deaths in Hillsborough County, Florida, in 1984 documented that 23% of non-CNS trauma deaths were preventable and occurred because of inadequate resuscitation or delay in proper surgical care. In late 1988 Hillsborough County organized a County Trauma Agency (HCTA) to coordinate trauma care among prehospital providers and state-designated trauma centers. The purpose of this study was to review county trauma deaths after the inception of the HCTA to determine the frequency of preventable deaths. 504 trauma deaths occurring between October 1989 and April 1991 were reviewed. Through committee review, 10 deaths were deemed preventable; 2 occurred outside the trauma system. Of the 10 deaths, 5 preventable deaths occurred late in severely injured patients. The preventable death rate has decreased to 7.0% with system care. The causes of preventable deaths have changed from delayed or inadequate intervention to postoperative care errors.

[Cause of death: from primary disease to direct cause of death].

PubMed

Oppewal, F; Smedts, F M M; Meyboom-de Jong, B

2005-07-23

Following the death of a patient, the treating physician in the Netherlands is required to fill out two forms. Form A, which is the certificate of death and Form B, which is used by the Statistics Netherlands to compile data on causes ofdeath. The latter form often poses difficulty for the physician with respect to the primary cause of death. This applies particularly to cases of sudden death, which account for one third of all deaths in the Netherlands. As a result, the statistical analyses appear to lead to an incorrect representation of the distribution of causes of death. A more thorough investigation into the primary cause of death is desirable, if necessary, supported by a request for an autopsy. The primary cause of death is to be regarded as the basic disease from which the cascade of changes ultimately leading to death originated.

Inaccuracies in oral cavity-pharynx cancer coded as the underlying cause of death on U.S. death certificates, and trends in mortality rates (1999-2010).

PubMed

Polednak, Anthony P

2014-08-01

To enhance surveillance of mortality from oral cavity-pharynx cancer (OCPC) by considering inaccuracies in the cancer site coded as the underlying cause of death on death certificates vs. cancer site in a population-based cancer registry (as the gold standard). A database was used for 9 population-based cancer registries of the Surveillance, Epidemiology and End Results (SEER) Program, including deaths in 1999-2010 for patients diagnosed in 1973-2010. Numbers of deaths and death rates for OCPC in the SEER population were modified for apparent inaccuracies in the cancer site coded as the underlying cause of death. For age groups <65 years, deaths from OCPC were underestimated by 22-35% by using unmodified (vs. modified) numbers, but temporal declines in death rates were still evident in the SEER population and were similar to declines using routine mortality data for the entire U.S. population. Deaths were underestimated by about 70-80% using underlying cause for tonsillar cancers, strongly associated with human papillomavirus (HPV) infection, but a lack of decline in death rates was still evident. Routine mortality statistics based on underlying cause of death underestimate OCPC deaths but demonstrate trends in OCPC death rates that require continued surveillance in view of increasing incidence rates for HPV-related OCPC. Copyright © 2014 Elsevier Ltd. All rights reserved.

Cause-specific mortality among children and young adults with epilepsy: Results from the U.S. National Child Death Review Case Reporting System.

PubMed

Tian, Niu; Shaw, Esther C; Zack, Matthew; Kobau, Rosemarie; Dykstra, Heather; Covington, Theresa M

2015-04-01

We investigated causes of death in children and young adults with epilepsy by using data from the U.S. National Child Death Review Case Reporting System (NCDR-CRS), a passive surveillance system composed of comprehensive information related to deaths reviewed by local child death review teams. Information on a total of 48,697 deaths in children and young adults 28days to 24years of age, including 551 deaths with epilepsy and 48,146 deaths without epilepsy, was collected from 2004 through 2012 in 32 states. In a proportionate mortality analysis by official manner of death, decedents with epilepsy had a significantly higher percentage of natural deaths but significantly lower percentages of deaths due to accidents, homicide, and undetermined causes compared with persons without epilepsy. With respect to underlying causes of death, decedents with epilepsy had significantly higher percentages of deaths due to drowning and most medical conditions including pneumonia and congenital anomalies but lower percentages of deaths due to asphyxia, weapon use, and unknown causes compared with decedents without epilepsy. The increased percentages of deaths due to pneumonia and drowning in children and young adults with epilepsy suggest preventive interventions including immunization and better instruction and monitoring before or during swimming. State-specific and national population-based mortality studies of children and young adults with epilepsy are recommended. Published by Elsevier Inc.

Cause-specific mortality among children and young adults with epilepsy: Results from the U.S. National Child Death Review Case Reporting System ☆

PubMed Central

Tian, Niu; Shaw, Esther C.; Zack, Matthew; Kobau, Rosemarie; Dykstra, Heather; Covington, Theresa M.

2015-01-01

We investigated causes of death in children and young adults with epilepsy by using data from the U.S. National Child Death Review Case Reporting System (NCDR-CRS), a passive surveillance system composed of comprehensive information related to deaths reviewed by local child death review teams. Information on a total of 48,697 deaths in children and young adults 28 days to 24 years of age, including 551 deaths with epilepsy and 48,146 deaths without epilepsy, was collected from 2004 through 2012 in 32 states. In a proportionate mortality analysis by official manner of death, decedents with epilepsy had a significantly higher percentage of natural deaths but significantly lower percentages of deaths due to accidents, homicide, and undetermined causes compared with persons without epilepsy. With respect to underlying causes of death, decedents with epilepsy had significantly higher percentages of deaths due to drowning and most medical conditions including pneumonia and congenital anomalies but lower percentages of deaths due to asphyxia, weapon use, and unknown causes compared with decedents without epilepsy. The increased percentages of deaths due to pneumonia and drowning in children and young adults with epilepsy suggest preventive interventions including immunization and better instruction and monitoring before or during swimming. State-specific and national population-based mortality studies of children and young adults with epilepsy are recommended. PMID:25794682

[Impact of heat waves on non-accidental deaths in Jinan, China].

PubMed

Zhang, J; Liu, S Q; Zhou, L; Gong, S P; Liu, Y L; Zhang, Y; Zhang, J

2016-02-20

To assess the impact of heat waves on non-accidental deaths, and to investigate the influencing factors for deaths caused by heat waves in Jinan, China. Daily death data and meteorological data for summer days with or without heat waves in Jinan from 2012 to 2014 were collected, and a cross-over analysis was conducted to evaluate the influence of heat waves on non-accidental deaths and deaths caused by other reasons. The univariate and multivariate logistic regression models were used to investigate the influencing factors for deaths caused by heat waves. The risks of non-accidental deaths and deaths caused by circulation system diseases during the days with heat waves were 1.82 times(95% CI: 1.47~2.36) and 1.53 times(95% CI: 1.14~2.07) those during the days without heat waves. The multivariate logistic regression analysis showed that old age(≥75 years)(OR=1.184, 95% CI: 1.068~1.313), low educational level(OR=1.187, 95% CI: 1.064~1.324), and deaths outside hospital(OR=1.105, 95% CI: 1.009~1.210) were associated with the high risk of deaths during the days with heat waves. Heat waves significantly increase the risk of non-accidental deaths and deaths caused by circulation system diseases in Jinan, and the deaths during the days with heat waves are related to age, educational level, and place of death.

Struck-by-lightning deaths in the United States.

PubMed

Adekoya, Nelson; Nolte, Kurt B

2005-05-01

The objective of the research reported here was to examine the epidemiologic characteristics of struck-by-lightning deaths. Using data from both the National Centers for Health Statistics (NCHS) multiple-cause-of-death tapes and the Census of Fatal Occupational Injuries (CFOI), which is maintained by the Bureau of Labor Statistics, the authors calculated numbers and annualized rates of lightning-related deaths for the United States. They used resident estimates from population microdata files maintained by the Census Bureau as the denominators. Work-related fatality rates were calculated with denominators derived from the Current Population Survey of employment data. Four illustrative investigative case reports of lightning-related deaths were contributed by the New Mexico Office of the Medical Investigator. It was found that a total of 374 struck-by-lightning deaths had occurred during 1995-2000 (an average annualized rate of 0.23 deaths per million persons). The majority of deaths (286 deaths, 75 percent) were from the South and the Midwest. The numbers of lightning deaths were highest in Florida (49 deaths) and Texas (32 deaths). A total of 129 work-related lightning deaths occurred during 1995-2002 (an average annual rate of 0.12 deaths per million workers). Agriculture and construction industries recorded the most fatalities at 44 and 39 deaths, respectively. Fatal occupational injuries resulting from being struck by lightning were highest in Florida (21 deaths) and Texas (11 deaths). In the two national surveillance systems examined, incidence rates were higher for males and people 20-44 years of age. In conclusion, three of every four struck-by-lightning deaths were from the South and the Midwest, and during 1995-2002, one of every four struck-by-lightning deaths was work-related. Although prevention programs could target the entire nation, interventions might be most effective if directed to regions with the majority of fatalities because they have the majority of lightning strikes per year.

The effect of patient death on medical students in the emergency department.

PubMed

Batley, Nicholas J; Bakhti, Rinad; Chami, Ali; Jabbour, Elsy; Bachir, Rana; El Khuri, Christopher; Mufarrij, Afif J

2017-07-10

The emotional consequences of patient deaths on physicians have been studied in a variety of medical settings. Reactions to patient death include distress, guilt, and grief. Comparatively, there are few studies on the effects of patient death on physicians and residents in the Emergency Department (ED). The ED setting is considered unique for having more sudden deaths that likely include the young and previously healthy and expectations for the clinician to return to a dynamic work environment. To date, no studies have looked at the effects of patient deaths on the more vulnerable population of medical students in the ED. This study examined aspects of patient deaths in the ED that most strongly influence students' reactions while comparing it to those of an inpatient setting. Semi-structured qualitative interviews were carried out with a total of 16 medical students from the American University of Beirut, Medical Center in Lebanon who had recently encountered a patient death in the ED. Questions included their reaction to the death, interaction with patients and their family members, the response of the medical team, and coping mechanisms adopted. The analysis revealed the following as determinant factors of student reaction to patient death: context of death; including age of patient, expectation of death, first death experience, relating patient death to personal deaths, and extent of interaction with patient and family members. Importantly, deaths in an inpatient setting were judged as more impactful than ED deaths. ED deaths, however, were especially powerful when a trauma case was deemed physically disturbing and cases in which family reactions were emotionally moving. The study demonstrates that students' emotional reactions differ as a function of the setting (surprise and shock in the ED versus sadness and grief in an inpatient setting). Debriefing and counseling sessions on ED deaths may benefit from this distinction.

Late Maternal Deaths and Deaths from Sequelae of Obstetric Causes in the Americas from 1999 to 2013: A Trend Analysis.

PubMed

de Cosio, Federico G; Jiwani, Safia S; Sanhueza, Antonio; Soliz, Patricia N; Becerra-Posada, Francisco; Espinal, Marcos A

2016-01-01

Data on maternal deaths occurring after the 42 days postpartum reference time is scarce; the objective of this analysis is to explore the trend and magnitude of late maternal deaths and deaths from sequelae of obstetric causes in the Americas between 1999 and 2013, and to recommend including these deaths in the monitoring of the Sustainable Development Goals (SDGs). Exploratory data analysis enabled analyzing the magnitude and trend of late maternal deaths and deaths from sequelae of obstetric causes for seven countries of the Americas: Argentina, Brazil, Canada, Colombia, Cuba, Mexico and the United States. A Poisson regression model was developed to compare trends of late maternal deaths and deaths from sequelae of obstetric causes between two periods of time: 1999 to 2005 and 2006 to 2013; and to estimate the relative increase of these deaths in the two periods of time. The proportion of late maternal deaths and deaths from sequelae of obstetric causes ranged between 2.40% (CI 0.85% - 5.48%) and 18.68% (CI 17.06% - 20.47%) in the seven countries. The ratio of late maternal deaths and deaths from sequelae of obstetric causes per 100,000 live births has increased by two times in the region of the Americas in the period 2006-2013 compared to the period 1999-2005. The regional relative increase of late maternal death was 2.46 (p<0.0001) times higher in the second period compared to the first. Ascertainment of late maternal deaths and deaths from sequelae of obstetric causes has improved in the Americas since the early 2000's due to improvements in the quality of information and the obstetric transition. Late and obstetric sequelae maternal deaths should be included in the monitoring of the SDGs as well as in the revision of the International Classification of Diseases' 11th version (ICD-11).

Late Maternal Deaths and Deaths from Sequelae of Obstetric Causes in the Americas from 1999 to 2013: A Trend Analysis

PubMed Central

de Cosio, Federico G.; Sanhueza, Antonio; Soliz, Patricia N.; Becerra-Posada, Francisco; Espinal, Marcos A.

2016-01-01

Background Data on maternal deaths occurring after the 42 days postpartum reference time is scarce; the objective of this analysis is to explore the trend and magnitude of late maternal deaths and deaths from sequelae of obstetric causes in the Americas between 1999 and 2013, and to recommend including these deaths in the monitoring of the Sustainable Development Goals (SDGs). Methods Exploratory data analysis enabled analyzing the magnitude and trend of late maternal deaths and deaths from sequelae of obstetric causes for seven countries of the Americas: Argentina, Brazil, Canada, Colombia, Cuba, Mexico and the United States. A Poisson regression model was developed to compare trends of late maternal deaths and deaths from sequelae of obstetric causes between two periods of time: 1999 to 2005 and 2006 to 2013; and to estimate the relative increase of these deaths in the two periods of time. Findings The proportion of late maternal deaths and deaths from sequelae of obstetric causes ranged between 2.40% (CI 0.85% – 5.48%) and 18.68% (CI 17.06% – 20.47%) in the seven countries. The ratio of late maternal deaths and deaths from sequelae of obstetric causes per 100,000 live births has increased by two times in the region of the Americas in the period 2006-2013 compared to the period 1999-2005. The regional relative increase of late maternal death was 2.46 (p<0.0001) times higher in the second period compared to the first. Interpretation Ascertainment of late maternal deaths and deaths from sequelae of obstetric causes has improved in the Americas since the early 2000’s due to improvements in the quality of information and the obstetric transition. Late and obstetric sequelae maternal deaths should be included in the monitoring of the SDGs as well as in the revision of the International Classification of Diseases’ 11th version (ICD-11). PMID:27626277

20 CFR 718.303 - Death from a respirable disease.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Death from a respirable disease. 718.303... OR DEATH DUE TO PNEUMOCONIOSIS Presumptions Applicable to Eligibility Determinations § 718.303 Death... death was due to pneumoconiosis. (2) Under this presumption, death shall be found due to a respirable...

20 CFR 410.450 - Death due to pneumoconiosis, including statutory presumption.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Death due to pneumoconiosis, including... Death Due to Pneumoconiosis § 410.450 Death due to pneumoconiosis, including statutory presumption... at the time of his death, or whose death is determined to have been due to pneumoconiosis. (For...

38 CFR 3.211 - Death.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Death. 3.211 Section 3..., Compensation, and Dependency and Indemnity Compensation Evidence Requirements § 3.211 Death. Death should be... community where death occurred. (2) A copy of a coroner's report of death or a verdict of a coroner's jury...

Children's Death Concepts and Ethnicity.

ERIC Educational Resources Information Center

Wass, Hannelore; Towry, Betty J.

1980-01-01

Relationships between death concepts of Black and White children and their racial status were examined. Lower-middle-class elementary children completed a four-item questionnaire on death. Most children defined death as the end of living and listed physical causes as the explanation of death. In general, children's death concepts were similar.…

Constructing Death: Three Pathographies about Dying.

ERIC Educational Resources Information Center

Hawkins, Anne Hunsaker

1991-01-01

Discusses three pathographies as models for the "good death." In each, the author organizes the phenomena associated with the illness and death of a spouse from cancer into a coherent pattern. The result is three different paradigms of the experience of dying: "ritual death,""victorious death," and "one's own death." (Author/LLL)

38 CFR 3.211 - Death.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 1 2013-07-01 2013-07-01 false Death. 3.211 Section 3..., Compensation, and Dependency and Indemnity Compensation Evidence Requirements § 3.211 Death. Death should be... community where death occurred. (2) A copy of a coroner's report of death or a verdict of a coroner's jury...

38 CFR 3.211 - Death.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 1 2014-07-01 2014-07-01 false Death. 3.211 Section 3..., Compensation, and Dependency and Indemnity Compensation Evidence Requirements § 3.211 Death. Death should be... community where death occurred. (2) A copy of a coroner's report of death or a verdict of a coroner's jury...

20 CFR 410.450 - Death due to pneumoconiosis, including statutory presumption.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 2 2011-04-01 2011-04-01 false Death due to pneumoconiosis, including... Death Due to Pneumoconiosis § 410.450 Death due to pneumoconiosis, including statutory presumption... at the time of his death, or whose death is determined to have been due to pneumoconiosis. (For...

38 CFR 3.211 - Death.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 1 2012-07-01 2012-07-01 false Death. 3.211 Section 3..., Compensation, and Dependency and Indemnity Compensation Evidence Requirements § 3.211 Death. Death should be... community where death occurred. (2) A copy of a coroner's report of death or a verdict of a coroner's jury...

38 CFR 3.211 - Death.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 1 2011-07-01 2011-07-01 false Death. 3.211 Section 3..., Compensation, and Dependency and Indemnity Compensation Evidence Requirements § 3.211 Death. Death should be... community where death occurred. (2) A copy of a coroner's report of death or a verdict of a coroner's jury...

Utility of the National Death Index in Ascertaining Mortality in Acquired Immunodeficiency Syndrome Surveillance

PubMed Central

Trepka, Mary Jo; Maddox, Lorene M.; Lieb, Spencer; Niyonsenga, Theophile

2011-01-01

To assess the utility of the National Death Index (NDI) in improving the ascertainment of deaths among people diagnosed with acquired immunodeficiency syndrome (AIDS), the authors determined the number and characteristics of additional deaths identified through NDI linkage not ascertained by using standard electronic linkage with Florida Vital Records and the Social Security Administration’s Death Master File. Records of people diagnosed with acquired immunodeficiency syndrome between 1993 and 2007 in Florida were linked to the NDI. The demographic characteristics and reported human immunodeficiency virus (HIV) transmission modes of people whose deaths were identified by using the NDI were compared with those whose deaths were ascertained by standard linkage methods. Of the 15,094 submitted records, 719 had confirmed matches, comprising 2.1% of known deaths (n = 34,504) within the cohort. Hispanics, males, people 40 years of age or older, and injection drug users were overrepresented among deaths ascertained only by the NDI. In-state deaths comprised 59.0% of newly identified deaths, and human immunodeficiency virus was less likely to be a cause of death among newly identified compared with previously identified deaths. The newly identified deaths were not previously ascertained principally because of slight differences in personal identifying information and could have been identified through improved linkages with Florida Vital Records. PMID:21540319

Utility of the National Death Index in ascertaining mortality in acquired immunodeficiency syndrome surveillance.

PubMed

Trepka, Mary Jo; Maddox, Lorene M; Lieb, Spencer; Niyonsenga, Theophile

2011-07-01

To assess the utility of the National Death Index (NDI) in improving the ascertainment of deaths among people diagnosed with acquired immunodeficiency syndrome (AIDS), the authors determined the number and characteristics of additional deaths identified through NDI linkage not ascertained by using standard electronic linkage with Florida Vital Records and the Social Security Administration's Death Master File. Records of people diagnosed with acquired immunodeficiency syndrome between 1993 and 2007 in Florida were linked to the NDI. The demographic characteristics and reported human immunodeficiency virus (HIV) transmission modes of people whose deaths were identified by using the NDI were compared with those whose deaths were ascertained by standard linkage methods. Of the 15,094 submitted records, 719 had confirmed matches, comprising 2.1% of known deaths (n = 34,504) within the cohort. Hispanics, males, people 40 years of age or older, and injection drug users were overrepresented among deaths ascertained only by the NDI. In-state deaths comprised 59.0% of newly identified deaths, and human immunodeficiency virus was less likely to be a cause of death among newly identified compared with previously identified deaths. The newly identified deaths were not previously ascertained principally because of slight differences in personal identifying information and could have been identified through improved linkages with Florida Vital Records.

Therapeutic milestone: stroke declines from the second to the third leading organ- and disease-specific cause of death in the United States.

PubMed

Towfighi, Amytis; Ovbiagele, Bruce; Saver, Jeffrey L

2010-03-01

Stroke mortality rates declined for much of the second half of the 20th century, but recent trends and their relation to other organ- and disease-specific causes of death have not been characterized. Using the National Center for Health Statistics mortality data, leading organ- and disease-specific causes of death were assessed for the most recent 10-year period (1996 to 2005) in the United States with a specific focus on stroke deaths. Age-adjusted stroke death rates declined by 25.4%; as a result, lung cancer (which only declined by 9.2%) surpassed stroke as the second leading cause of death in 2003. Despite a 31.9% decline in age-adjusted ischemic heart disease death rates, it remains the leading cause of death. Stroke is now the fifth leading cause of death in men and the fourth leading cause of death in whites but remains the second leading cause of death in women and blacks. With stroke death rates decreasing substantially in the United States from 1996 to 2005, stroke moved from the second to the third leading organ- and disease-specific cause of death. Women and blacks may warrant attention for targeted stroke prevention and treatment because they continue to have disproportionately high stroke death rates.

Exposing misclassified HIV/AIDS deaths in South Africa

PubMed Central

Birnbaum, Jeanette Kurian; Murray, Christopher JL

2011-01-01

Abstract Objective To quantify the deaths from human immunodeficiency virus (HIV) infection or acquired immunodeficiency syndrome (AIDS) that are misattributed to other causes in South Africa’s death registration data and to adjust for this bias. Methods Deaths in the World Health Organization’s mortality database were distributed among 48 mutually exclusive causes. For each cause, age- and sex-specific global death rates were compared with the average rate among people aged 65–69, 70–74 and 75–79 years to generate “relative” global death rates. Relative rates were also computed for South Africa alone. Differences between global and South African relative death rates were used to identify the causes to which deaths from HIV/AIDS were misattributed in South Africa and quantify the HIV/AIDS deaths misattributed to each. These deaths were then reattributed to HIV/AIDS. Findings In South Africa, deaths from HIV/AIDS are often misclassified as being caused by 14 other conditions. Whereas in 1996–2006 deaths attributed to HIV/AIDS accounted for 2.0–2.5% of all registered deaths in South Africa, our analysis shows that the true cause-specific mortality fraction rose from 19% (uncertainty range: 7–28%) to 48% (uncertainty range: 38–50%) over that period. More than 90% of HIV/AIDS deaths were found to have been misattributed to other causes during 1996–2006. Conclusion Adjusting for cause of death misclassification, a simple procedure that can be carried out in any country, can improve death registration data and provide empirical estimates of HIV/AIDS deaths that may be useful in assessing estimates from demographic models. PMID:21479092

Cardiac and Noncardiac Causes of Long-Term Mortality in ST-Segment-Elevation Acute Myocardial Infarction Patients Who Underwent Primary Percutaneous Coronary Intervention.

PubMed

Yamashita, Yugo; Shiomi, Hiroki; Morimoto, Takeshi; Yaku, Hidenori; Furukawa, Yutaka; Nakagawa, Yoshihisa; Ando, Kenji; Kadota, Kazushige; Abe, Mitsuru; Nagao, Kazuya; Shizuta, Satoshi; Ono, Koh; Kimura, Takeshi

2017-01-01

In patients with ST-segment-elevation acute myocardial infarction (STEMI) who underwent primary percutaneous coronary intervention, long-term risks for cardiac and noncardiac death beyond acute phase of STEMI have not been thoroughly evaluated yet. We identified 3942 STEMI patients who had primary percutaneous coronary intervention within 24 hours after onset between January 2005 and December 2007 in the CREDO-Kyoto AMI registry (Coronary Revascularization Demonstrating Outcome study in Kyoto Acute Myocardial Infarction) and evaluated their short-term (within 6-month) and long-term (beyond 6-month) incidences and causes of deaths. The cumulative 5-year incidence of all-cause death in the current study population was 20.4% (cardiac death, 12.2% and noncardiac death, 9.4%, respectively). The vast majority of deaths were cardiac in origin within 6-month (cardiac death, 8.0% and noncardiac death, 0.9%), whereas noncardiac death accounted for nearly two thirds of all-cause death beyond 6-month (cardiac death, 4.6% and noncardiac death, 8.5%). In the stratified analysis according to age, the proportion of noncardiac death was similar regardless of age although the absolute mortality rate was higher with increasing age. By the multivariable Cox regression models, the independent risk factors of all-cause death were advanced age, cardiogenic shock, renal dysfunction, large infarct size, and anterior wall infarction within 6 months after STEMI, and advanced age, previous heart failure, renal dysfunction, and liver cirrhosis beyond 6 months after STEMI, respectively. In STEMI patients who underwent primary percutaneous coronary intervention, the long-term risk for cardiac death was relatively low compared with that for noncardiac death, which accounted for nearly two thirds of all-cause death beyond 6 months. © 2017 American Heart Association, Inc.

Potentially preventable deaths from the five leading causes of death--United States, 2008-2010.

PubMed

Yoon, Paula W; Bastian, Brigham; Anderson, Robert N; Collins, Janet L; Jaffe, Harold W

2014-05-02

In 2010, the top five causes of death in the United States were 1) diseases of the heart, 2) cancer, 3) chronic lower respiratory diseases, 4) cerebrovascular diseases (stroke), and 5) unintentional injuries. The rates of death from each cause vary greatly across the 50 states and the District of Columbia (2). An understanding of state differences in death rates for the leading causes might help state health officials establish disease prevention goals, priorities, and strategies. States with lower death rates can be used as benchmarks for setting achievable goals and calculating the number of deaths that might be prevented in states with higher rates. To determine the number of premature annual deaths for the five leading causes of death that potentially could be prevented ("potentially preventable deaths"), CDC analyzed National Vital Statistics System mortality data from 2008-2010. The number of annual potentially preventable deaths per state before age 80 years was determined by comparing the number of expected deaths (based on average death rates for the three states with the lowest rates for each cause) with the number of observed deaths. The results of this analysis indicate that, when considered separately, 91,757 deaths from diseases of the heart, 84,443 from cancer, 28,831 from chronic lower respiratory diseases, 16,973 from cerebrovascular diseases (stroke), and 36,836 from unintentional injuries potentially could be prevented each year. In addition, states in the Southeast had the highest number of potentially preventable deaths for each of the five leading causes. The findings provide disease-specific targets that states can use to measure their progress in preventing the leading causes of deaths in their populations.

Impact of a hospital-level intervention to reduce heart disease overreporting on leading causes of death.

PubMed

Al-Samarrai, Teeb; Madsen, Ann; Zimmerman, Regina; Maduro, Gil; Li, Wenhui; Greene, Carolyn; Begier, Elizabeth

2013-05-16

The quality of cause-of-death reporting on death certificates affects the usefulness of vital statistics for public health action. Heart disease deaths are overreported in the United States. We evaluated the impact of an intervention to reduce heart disease overreporting on other leading causes of death. A multicomponent intervention comprising training and communication with hospital staff was implemented during July through December 2009 at 8 New York City hospitals reporting excessive heart disease deaths. We compared crude, age-adjusted, and race/ethnicity-adjusted proportions of leading, underlying causes of death reported during death certification by intervention and nonintervention hospitals during preintervention (January-June 2009) and postintervention (January-June 2010) periods. We also examined trends in leading causes of death for 2000 through 2010. At intervention hospitals, heart disease deaths declined by 54% postintervention; other leading causes of death (ie, malignant neoplasms, influenza and pneumonia, cerebrovascular disease, and chronic lower respiratory diseases) increased by 48% to 232%. Leading causes of death at nonintervention hospitals changed by 6% or less. In the preintervention period, differences in leading causes of death between intervention and nonintervention hospitals persisted after controlling for race/ethnicity and age; in the postintervention period, age accounted for most differences observed between intervention and nonintervention hospitals. Postintervention, malignant neoplasms became the leading cause of premature death (ie, deaths among patients aged 35-74 y) at intervention hospitals. A hospital-level intervention to reduce heart disease overreporting led to substantial changes to other leading causes of death, changing the leading cause of premature death. Heart disease overreporting is likely obscuring the true levels of cause-specific mortality.

'Natural' and 'Unnatural' medical deaths and coronial law: A UK and international review of the medical literature on natural and unnatural death and how it applies to medical death certification and reporting deaths to coroners: Natural/Unnatural death: A Scientific Review.

PubMed

Harris, Andrew

2017-07-01

In the United Kingdom, when people die, either a doctor writes an acceptable natural cause of death medical certificate, or a coroner (fiscal in Scotland) investigates the case, usually with an autopsy. An inquest may or may not follow. The concept of 'natural or unnatural cause' death is not internationally standardized. This article reviews scientific evidence as to what is a natural death or unnatural death and how that relates to the international classification of deaths. Whilst there is some consensus on the definition, its application in considering whether to report to the coroner is more difficult. Depictions of deaths in terminal care, medical emergencies and post-operative care highlight these difficulties. It secondly reviews to what extent natural and unnatural are criteria for notification of deaths in England and Wales and internationally. It concludes with consideration of how medical concepts of unnatural death relate in England and Wales to coroners' legal concepts of what is unnatural. Deaths that appear natural to clinicians and pathologists may be legally unnatural and vice versa. It is argued that the natural/unnatural dichotomy is not a good criterion for reporting deaths under medical care to coroners, but the notification of a medical cause of death, using the International Classification of Disease Codes and the medical professional view as to whether it is scientifically natural, is of great value to the coroner in deciding whether it is legally unnatural.

Overseas visitor deaths in Australia, 2001 to 2003.

PubMed

Leggat, Peter A; Wilks, Jeff

2009-01-01

The health and safety of international visitors remain an important issue for Australia and other tourist destinations. The death of visitors remains an important indicator of safety. The aim of this study was to provide updated figures on deaths of overseas travelers in Australia. Data were sourced from the Australian Bureau of Statistics concerning deaths of overseas visitors for the years 2001 to 2003. There were 1,068 overseas visitor deaths (701 males, 66%) during the study period 2001 to 2003. Death by natural causes increased with age, while deaths associated with accidents were more frequent among younger age groups. The majority of deaths were from natural causes (782, 73%), particularly ischemic heart diseases (26%). There were a total of 247 accidental deaths (23% of all deaths) with the main causes being transportation accidents (14% of all deaths) and accidental drowning/submersion (5% of all deaths). The countries contributing the most deaths were the UK (247, 23%), New Zealand (108, 10%) Melanesia/Micronesia (95, 9%), and the United States (57, 5%). Australia remains a relatively safe destination for international travelers, at least in terms of fatalities, which appear to be declining. Most deaths of overseas tourists in Australia are due to natural causes with cardiovascular disease being the predominant cause of death in this group. Accidents remain the most common preventable cause of death of travelers, with road and water safety being the major issues. It is important that tourism and travel medicine groups continue to advocate for improved health and safety of international travelers visiting Australia.

Mortality risks in new-onset childhood epilepsy.

PubMed

Berg, Anne T; Nickels, Katherine; Wirrell, Elaine C; Geerts, Ada T; Callenbach, Petra M C; Arts, Willem F; Rios, Christina; Camfield, Peter R; Camfield, Carol S

2013-07-01

Estimate the causes and risk of death, specifically seizure related, in children followed from onset of epilepsy and to contrast the risk of seizure-related death with other common causes of death in the population. Mortality experiences from 4 pediatric cohorts of newly diagnosed patients were combined. Causes of death were classified as seizure related (including sudden unexpected death [SUDEP]), natural causes, nonnatural causes, and unknown. Of 2239 subjects followed up for >30 000 person-years, 79 died. Ten subjects with lethal neurometabolic conditions were ultimately excluded. The overall death rate (per 100 000 person-years) was 228; 743 in complicated epilepsy (with associated neurodisability or underlying brain condition) and 36 in uncomplicated epilepsy. Thirteen deaths were seizure-related (10 SUDEP, 3 other), accounting for 19% of all deaths. Seizure-related death rates were 43 overall, 122 for complicated epilepsy, and 14 for uncomplicated epilepsy. Death rates from other natural causes were 159, 561, and 9, respectively. Of 48 deaths from other natural causes, 37 were due to pneumonia or other respiratory complications. Most excess death in young people with epilepsy is not seizure-related. Mortality is significantly higher compared with the general population in children with complicated epilepsy but not uncomplicated epilepsy. The SUDEP rate was similar to or higher than sudden infant death syndrome rates. In uncomplicated epilepsy, sudden and seizure-related death rates were similar to or higher than rates for other common causes of death in young people (eg, accidents, suicides, homicides). Relating the risk of death in epilepsy to familiar risks may facilitate discussions of seizure-related mortality with patients and families.

A comparison of sisterhood information on causes of maternal death with the registration causes of maternal death in Matlab, Bangladesh.

PubMed

Shahidullah, M

1995-10-01

To explore whether causes of maternal death can be investigated using the sisterhood method, an indirect method for providing a community-based estimate of the level of maternal mortality, this study compares the sisterhood causes of maternal death with the Matlab Demographic Surveillance System's (DSS) causes of maternal death. Data for this study came from the Matlab DSS, which has been in operation since 1966 as a field site of the International Centre for Diarrhoeal Disease Research, Bangladesh. The maternal deaths that occurred during the 15-year period from 1976 to 1990 in the Matlab DSS area are the basis of this study. A sisterhood survey was conducted in Matlab in November and December 1991 to collect information on conditions, events and symptoms that preceded death. The collected information was evaluated to assign a most likely cause of maternal death. The sisterhood survey cause of maternal death was then compared with the DSS cause of maternal death. Cause of death could not be assigned with reasonable confidence for 34 (11%) of the 305 maternal deaths for which information was collected. For the remaining deaths, the agreement between the two classification systems was generally high for most cause-of-death categories considered. Though cause-of-death information obtained by the sisterhood method will always be subject to some error, it can provide an indication of an overall distribution of causes of maternal deaths. This data can be used for the planning of programmes aimed at reducing maternal mortality and for the evaluation of such programmes over time.

20 CFR 10.903 - Is the death gratuity payment applicable retroactively?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Is the death gratuity payment applicable...' COMPENSATION ACT, AS AMENDED Death Gratuity § 10.903 Is the death gratuity payment applicable retroactively? An employee's death qualifies for the death gratuity if the employee died on or after October 7, 2001, and...

32 CFR 700.815 - Deaths.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 5 2010-07-01 2010-07-01 false Deaths. 700.815 Section 700.815 National Defense... § 700.815 Deaths. The commanding officer, in the event of the death of any person within his or her command, shall ensure that the cause of death and the circumstances under which death occurred are...

22 CFR 72.6 - Report of presumptive death.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Report of presumptive death. 72.6 Section 72.6... DEATHS AND ESTATES Reporting Deaths of United States Nationals § 72.6 Report of presumptive death. (a) Local finding. When there is a local finding of presumptive death by a competent local authority, a...

42 CFR 102.33 - Death benefits.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Death benefits. 102.33 Section 102.33 Public Health... Available Benefits § 102.33 Death benefits. (a) Eligible survivors may be able to receive a death benefit... and lifetime caps may apply to the death benefits provided. The method and amount of death benefits...

22 CFR 72.4 - Notifications of death.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Notifications of death. 72.4 Section 72.4... DEATHS AND ESTATES Reporting Deaths of United States Nationals § 72.4 Notifications of death. The... legal representative (if any, and if different from the next of kin), of the death of a United States...

20 CFR 10.911 - How is the death gratuity payment process initiated?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false How is the death gratuity payment process...' COMPENSATION ACT, AS AMENDED Death Gratuity § 10.911 How is the death gratuity payment process initiated? (a... death gratuity payment process. If the death gratuity payment process is initiated by the employing...

20 CFR 702.201 - Reports from employers of employee's injury or death.

Code of Federal Regulations, 2010 CFR

2010-04-01

... or death. 702.201 Section 702.201 Employees' Benefits EMPLOYMENT STANDARDS ADMINISTRATION, DEPARTMENT... death. (a) Within 10 days from the date of an employee's injury or death, or 10 days from the date an employer has knowledge of an employee's injury or death, including any disease or death proximately caused...

20 CFR 10.903 - Is the death gratuity payment applicable retroactively?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 20 Employees' Benefits 1 2013-04-01 2012-04-01 true Is the death gratuity payment applicable...' COMPENSATION ACT, AS AMENDED Death Gratuity § 10.903 Is the death gratuity payment applicable retroactively? An employee's death qualifies for the death gratuity if the employee died on or after October 7, 2001, and...

32 CFR 700.815 - Deaths.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 5 2014-07-01 2014-07-01 false Deaths. 700.815 Section 700.815 National Defense... § 700.815 Deaths. The commanding officer, in the event of the death of any person within his or her command, shall ensure that the cause of death and the circumstances under which death occurred are...

20 CFR 10.903 - Is the death gratuity payment applicable retroactively?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 20 Employees' Benefits 1 2012-04-01 2012-04-01 false Is the death gratuity payment applicable...' COMPENSATION ACT, AS AMENDED Death Gratuity § 10.903 Is the death gratuity payment applicable retroactively? An employee's death qualifies for the death gratuity if the employee died on or after October 7, 2001, and...

22 CFR 72.4 - Notifications of death.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Notifications of death. 72.4 Section 72.4... DEATHS AND ESTATES Reporting Deaths of United States Nationals § 72.4 Notifications of death. The... legal representative (if any, and if different from the next of kin), of the death of a United States...

22 CFR 72.6 - Report of presumptive death.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Report of presumptive death. 72.6 Section 72.6... DEATHS AND ESTATES Reporting Deaths of United States Nationals § 72.6 Report of presumptive death. (a) Local finding. When there is a local finding of presumptive death by a competent local authority, a...

22 CFR 72.6 - Report of presumptive death.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Report of presumptive death. 72.6 Section 72.6... DEATHS AND ESTATES Reporting Deaths of United States Nationals § 72.6 Report of presumptive death. (a) Local finding. When there is a local finding of presumptive death by a competent local authority, a...

22 CFR 72.6 - Report of presumptive death.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Report of presumptive death. 72.6 Section 72.6... DEATHS AND ESTATES Reporting Deaths of United States Nationals § 72.6 Report of presumptive death. (a) Local finding. When there is a local finding of presumptive death by a competent local authority, a...

32 CFR 700.815 - Deaths.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 5 2012-07-01 2012-07-01 false Deaths. 700.815 Section 700.815 National Defense... § 700.815 Deaths. The commanding officer, in the event of the death of any person within his or her command, shall ensure that the cause of death and the circumstances under which death occurred are...

22 CFR 72.6 - Report of presumptive death.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Report of presumptive death. 72.6 Section 72.6... DEATHS AND ESTATES Reporting Deaths of United States Nationals § 72.6 Report of presumptive death. (a) Local finding. When there is a local finding of presumptive death by a competent local authority, a...

20 CFR 10.903 - Is the death gratuity payment applicable retroactively?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 20 Employees' Benefits 1 2014-04-01 2012-04-01 true Is the death gratuity payment applicable...' COMPENSATION ACT, AS AMENDED Death Gratuity § 10.903 Is the death gratuity payment applicable retroactively? An employee's death qualifies for the death gratuity if the employee died on or after October 7, 2001, and...

20 CFR 10.903 - Is the death gratuity payment applicable retroactively?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 1 2011-04-01 2011-04-01 false Is the death gratuity payment applicable...' COMPENSATION ACT, AS AMENDED Death Gratuity § 10.903 Is the death gratuity payment applicable retroactively? An employee's death qualifies for the death gratuity if the employee died on or after October 7, 2001, and...

32 CFR 700.815 - Deaths.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 5 2011-07-01 2011-07-01 false Deaths. 700.815 Section 700.815 National Defense... § 700.815 Deaths. The commanding officer, in the event of the death of any person within his or her command, shall ensure that the cause of death and the circumstances under which death occurred are...

22 CFR 72.4 - Notifications of death.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Notifications of death. 72.4 Section 72.4... DEATHS AND ESTATES Reporting Deaths of United States Nationals § 72.4 Notifications of death. The... legal representative (if any, and if different from the next of kin), of the death of a United States...

22 CFR 72.4 - Notifications of death.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Notifications of death. 72.4 Section 72.4... DEATHS AND ESTATES Reporting Deaths of United States Nationals § 72.4 Notifications of death. The... legal representative (if any, and if different from the next of kin), of the death of a United States...

22 CFR 72.4 - Notifications of death.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Notifications of death. 72.4 Section 72.4... DEATHS AND ESTATES Reporting Deaths of United States Nationals § 72.4 Notifications of death. The... legal representative (if any, and if different from the next of kin), of the death of a United States...

32 CFR 700.815 - Deaths.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 5 2013-07-01 2013-07-01 false Deaths. 700.815 Section 700.815 National Defense... § 700.815 Deaths. The commanding officer, in the event of the death of any person within his or her command, shall ensure that the cause of death and the circumstances under which death occurred are...

Long life, natural death. The learned ideal of dying in late medieval commentaries on Avicenna's Canon.

PubMed

van 't Land, Karine

2014-01-01

Within late medieval learned medicine, natural death functioned both as a theoretical concept and as a goal for practice. Late medieval commentaries on Avicenna's Canon are used as source material in this study, in order to investigate the ways in which these learned medical authors envisaged natural death. The findings are compared to descriptions of natural death by natural philosophers, and to ideals of dying in broader medieval culture. According to the physicians, natural death was caused by the extinction of innate heat, due to a lack of innate moisture. They discussed natural death in relation to regimen, as the right regimen protected the body's heat and moisture, and thus helped a patient to keep natural death aloof. So, in order to think about natural death, the physicians turned to the whole of life, during which heat dried out moisture and regimens ought to be followed. By contrast, natural philosophers tended to focus on the moment of death itself. The comparison of natural death with the Good Death in broad medieval culture highlights the amoral nature of the natural death.

Motor vehicle and fall related deaths among older Americans 1990-98: sex, race, and ethnic disparities.

PubMed

Stevens, J A; Dellinger, A M

2002-12-01

To examine differences in motor vehicle and fall related death rates among older adults by sex, race, and ethnicity. Annual mortality tapes for 1990-98 provided demographic data including race and ethnicity, date, and cause of death. Trend analyses were conducted using Poisson regression. From 1990-98, overall motor vehicle related death rates remained stable while death rates from unintentional falls increased. Motor vehicle and fall related death rates were higher among men. Motor vehicle related death rates were higher among people of color while fall related death rates were higher among whites. Among whites, fall death rates increased significantly during the study period, with an annual relative increase of 3.6% for men and 3.2% for women. The risk of death from motor vehicle and fall related injuries among older adults differed by sex, race and ethnicity, results obscured by simple age and sex specific death rates. This study found important patterns and disparities in these death rates by race and ethnicity useful for identifying high risk groups and guiding prevention strategies.

[External post-mortem examination].

PubMed

Hartwig, S

2016-09-01

The external post-mortem examination in Germany is a non-delegable medical duty for determination of death, identity of the deceased, cause of death, manner of death, time of death and notifiable infectious diseases. Within the framework of rescue service missions the physician is limited to ascertaining that death has occurred. The determination of death must be reliable and is automatically followed by a complete external post-mortem examination of the body, if necessary by another physician. The certain signs of death are livor mortis, rigor mortis and putrefaction. Reliable features for the occurrence of death are injuries which are not compatible with life and brain death. The external post-mortem examination is the basis for the decision on whether further criminal investigations are necessary. The external post-mortem examination and the accompanying death certification must always be meticulously carried out.

A critical assessment of mortality statistics in Thailand: potential for improvements.

PubMed Central

Tangcharoensathien, Viroj; Faramnuayphol, Pinij; Teokul, Waranya; Bundhamcharoen, Kanitta; Wibulpholprasert, Suwit

2006-01-01

This study evaluates the collection and flow of mortality and cause-of-death (COD) data in Thailand, identifying areas of weakness and presenting potential approaches to improve these statistics. Methods include systems analysis, literature review, and the application of the Health Metrics Network (HMN) self-assessment tool by key stakeholders. We identified two weaknesses underlying incompleteness of death registration and inaccuracy of COD attribution: problems in recording events or certifying deaths, and problems in transferring information from death certificates to death registers. Deaths occurring outside health facilities, representing 65% of all deaths in Thailand, contribute to the inaccuracy of cause-of-death data because they must be certified by village heads with limited knowledge and expertise in cause-of-death attribution. However, problems also exist with in-hospital cause-of-death certification by physicians. Priority should be given to training medical personnel in death certification, review of medical records by health personnel in district hospitals, and use of verbal autopsy techniques for assessing internal consistency. This should be coupled with stronger collaboration with district registrars for the 65% of deaths that occur outside hospitals. Training of physicians and data coders and harmonization of death certificates and registries would improve COD data for the 35% of deaths that take place in hospital. Public awareness of the importance of registering all deaths and the application of registration requirements prior to funerals would also improve coverage, though enforcement would be difficult. PMID:16583083

Effect of cause-of-death training on agreement between hospital discharge diagnoses and cause of death reported, inpatient hospital deaths, New York City, 2008-2010.

PubMed

Ong, Paulina; Gambatese, Melissa; Begier, Elizabeth; Zimmerman, Regina; Soto, Antonio; Madsen, Ann

2015-01-15

Accurate cause-of-death reporting is required for mortality data to validly inform public health programming and evaluation. Research demonstrates overreporting of heart disease on New York City death certificates. We describe changes in reported causes of death following a New York City health department training conducted in 2009 to improve accuracy of cause-of-death reporting at 8 hospitals. The objective of our study was to assess the degree to which death certificates citing heart disease as cause of death agreed with hospital discharge data and the degree to which training improved accuracy of reporting. We analyzed 74,373 death certificates for 2008 through 2010 that were linked with hospital discharge records for New York City inpatient deaths and calculated the proportion of discordant deaths, that is, death certificates reporting an underlying cause of heart disease with no corresponding discharge record diagnosis. We also summarized top principal diagnoses among discordant reports and calculated the proportion of inpatient deaths reporting sepsis, a condition underreported in New York City, to assess whether documentation practices changed in response to clarifications made during the intervention. Citywide discordance between death certificates and discharge data decreased from 14.9% in 2008 to 9.6% in 2010 (P < .001), driven by a decrease in discordance at intervention hospitals (20.2% in 2008 to 8.9% in 2010; P < .001). At intervention hospitals, reporting of sepsis increased from 3.7% of inpatient deaths in 2008 to 20.6% in 2010 (P < .001). Overreporting of heart disease as cause of death declined at intervention hospitals, driving a citywide decline, and sepsis reporting practices changed in accordance with health department training. Researchers should consider the effect of overreporting and data-quality changes when analyzing New York City heart disease mortality trends. Other vital records jurisdictions should employ similar interventions to improve cause-of-death reporting and use linked discharge data to monitor data quality.

Causes of maternal and child mortality among Cambodian sex workers and their children: a cross sectional study.

PubMed

Willis, Brian; Onda, Saki; Stoklosa, Hanni Marie

2016-11-21

To reach global and national goals for maternal and child mortality, countries must identify vulnerable populations, which includes sex workers and their children. The objective of this study was to identify and describe maternal deaths of female sex workers in Cambodia and causes of death among their children. A convenience sample of female sex workers were recruited by local NGOs that provide support to sex workers. We modified the maternal mortality section of the 2010 Cambodia Demographic and Health Survey and collected reports of all deaths of female sex workers. For each death we ask the 'sisterhood' methodology questions to identify maternal deaths. For child deaths we asked each mother who reported the death of a child about the cause of death. We also asked all participants about the cause of deaths of children of other female sex workers. We interviewed 271 female sex workers in the four largest Cambodian cities between May and September 2013. Participants reported 32 deaths of other female sex workers that met criteria for maternal death. The most common reported causes of maternal deaths were abortion (n = 13;40%) and HIV (n = 5;16%). Participants report deaths of 8 of their children and 50 deaths of children of other female sex workers. HIV was the reported cause of death for 13 (36%) children under age five. This is the first report of maternal deaths of sex workers in Cambodia or any other country. This modification of the sisterhood methodology has not been validated and did not allow us to calculate maternal mortality rates so the results are not generalizable, however these deaths may represent unrecognized maternal deaths in Cambodia. The results also indicate that children of sex workers in Cambodia are at risk of HIV and may not be accessing treatment. These issues require additional studies but in the meantime we must assure that sex workers in Cambodia and their children have access to quality health services.

Influence of Clinical Status on the Association Between Plasma Total and Unbound Bilirubin and Death or Adverse Neurodevelopmental Outcomes in Extremely Low Birth Weight Infants

PubMed Central

Oh, William; Stevenson, David K.; Tyson, Jon E.; Morris, Brenda H.; Ahlfors, Charles E.; Bender, G. Jesse; Wong, Ronald J.; Perritt, Rebecca; Vohr, Betty R.; Van Meurs, Krista P.; Vreman, Hendrik J.; Das, Abhik; Phelps, Dale L.; O’Shea, T. Michael; Higgins, Rosemary D.

2010-01-01

Objectives To assess the influence of clinical status on the association between total plasma bilirubin and unbound bilirubin on death or adverse neurodevelopmental outcomes at 18–22 months corrected age in extremely low birth weight infants. Method Total plasma biirubin and unbound biirubin were measured in 1,101 extremely low birth weight infants at 5±1 day of age. Clinical criteria were used to classify infants as clinically stable or unstable. Survivors were examined at 18–22 months corrected age by certified examiners. Outcome variables were death or neurodevelopmental impairment, death or cerebral palsy, death or hearing loss, and death prior to follow-up. For all outcomes, the interaction between bilirubin variables and clinical status was assessed in logistic regression analyses adjusted for multiple risk factors. Results Regardless of clinical status, an increasing level of unbound bilirubin was associated with higher rates of death or neurodevelopmental impairment, death or cerebral palsy, death or hearing loss and death before follow-up. Total plasma bilirubin values were directly associated with death or neurodevelopmental impairment, death or cerebral palsy, death or hearing loss, and death before follow-up in unstable infants, but not in stable infants. An inverse association between total plasma bilirubin and death or cerebral palsy was found in stable infants. Conclusions In extremely low birth weight infants, clinical status at 5 days of age affects the association between total plasma and unbound bilirubin and death or adverse neurodevelopmental outcomes at 18–22 months of corrected age. An increasing level of UB is associated a higher risk of death or adverse neurodevelopmental outcomes regardless of clinical status. Increasing levels of total plasma bilirubin are directly associated with increasing risk of death or adverse neurodevelopmental outcomes in unstable, but not in stable infants. PMID:20105142

Deaths from injury in children and employment status in family: analysis of trends in class specific death rates.

PubMed

Edwards, Phil; Roberts, Ian; Green, Judith; Lutchmun, Suzanne

2006-07-15

To examine socioeconomic inequalities in rates of death from injury in children in England and Wales. Analysis of rates of death from injury in children by the eight class version of the National Statistics Socio-Economic Classification (NS-SEC) and by the registrar general's social classification. England and Wales during periods of four years around the 1981, 1991, and 2001 censuses. Children aged 0-15 years. Death rates from injury and poisoning. Rates of death from injury in children fell from 11.1 deaths (95% confidence interval 10.8 to 11.5 deaths) per 100,000 children per year around the 1981 census to 4.0 deaths (3.8 to 4.2 deaths) per 100,000 children per year around the 2001 census. Socioeconomic inequalities remain: the death rate from all external causes for children of parents classified as never having worked or as long term unemployed (NS-SEC 8) was 13.1 (10.3 to 16.5) times that for children in NS-SEC 1(higher managerial/professional occupations). For deaths as pedestrians the rate in NS-SEC 8 was 20.6 (10.6 to 39.9) times higher than in NS-SEC 1; for deaths as cyclists it was 27.5 (6.4 to 118.2) times higher; for deaths due to fires it was 37.7 (11.6 to 121.9) times higher; and for deaths of undetermined intent it was 32.6 (15.8 to 67.2) times higher. Overall rates of death from injury and poisoning in children have fallen in England and Wales over the past 20 years, except for rates in children in families in which no adult is in paid employment. Serious inequalities in injury death rates remain, particularly for pedestrians, cyclists, house fires, and deaths of undetermined intent.

The Epidemiology of Hospital Death Following Pediatric Severe Sepsis: When, Why, and How Children With Sepsis Die.

PubMed

Weiss, Scott L; Balamuth, Fran; Hensley, Josey; Fitzgerald, Julie C; Bush, Jenny; Nadkarni, Vinay M; Thomas, Neal J; Hall, Mark; Muszynski, Jennifer

2017-09-01

The epidemiology of in-hospital death after pediatric sepsis has not been well characterized. We investigated the timing, cause, mode, and attribution of death in children with severe sepsis, hypothesizing that refractory shock leading to early death is rare in the current era. Retrospective observational study. Emergency departments and ICUs at two academic children's hospitals. Seventy-nine patients less than 18 years old treated for severe sepsis/septic shock in 2012-2013 who died prior to hospital discharge. None. Time to death from sepsis recognition, cause and mode of death, and attribution of death to sepsis were determined from medical records. Organ dysfunction was assessed via daily Pediatric Logistic Organ Dysfunction-2 scores for 7 days preceding death with an increase greater than or equal to 5 defined as worsening organ dysfunction. The median time to death was 8 days (interquartile range, 1-12 d) with 25%, 35%, and 49% of cumulative deaths within 1, 3, and 7 days of sepsis recognition, respectively. The most common cause of death was refractory shock (34%), then multiple organ dysfunction syndrome after shock recovery (27%), neurologic injury (19%), single-organ respiratory failure (9%), and nonseptic comorbidity (6%). Early deaths (≤ 3 d) were mostly due to refractory shock in young, previously healthy patients while multiple organ dysfunction syndrome predominated after 3 days. Mode of death was withdrawal in 72%, unsuccessful cardiopulmonary resuscitation in 22%, and irreversible loss of neurologic function in 6%. Ninety percent of deaths were attributable to acute or chronic manifestations of sepsis. Only 23% had a rise in Pediatric Logistic Organ Dysfunction-2 that indicated worsening organ dysfunction. Refractory shock remains a common cause of death in pediatric sepsis, especially for early deaths. Later deaths were mostly attributable to multiple organ dysfunction syndrome, neurologic, and respiratory failure after life-sustaining therapies were limited. A pattern of persistent, rather than worsening, organ dysfunction preceded most deaths.

Trauma deaths in a mature urban trauma system: is "trimodal" distribution a valid concept?

PubMed

Demetriades, Demetrios; Kimbrell, Brian; Salim, Ali; Velmahos, George; Rhee, Peter; Preston, Christy; Gruzinski, Ginger; Chan, Linda

2005-09-01

Trimodal distribution of trauma deaths, described more than 20 years ago, is still widely taught in the design of trauma systems. The purpose of this study was to examine the applicability of this trimodal distribution in a modern trauma system. A study of trauma registry and emergency medical services records of trauma deaths in the County of Los Angeles was conducted over a 3-year period. The times from injury to death were analyzed according to mechanism of injury and body area (head, chest, abdomen, extremities) with severe trauma (abbreviated injury score [AIS] >/= 4). During the study period there were 4,151 trauma deaths. Penetrating trauma accounted for 50.0% of these deaths. The most commonly injured body area with critical trauma (AIS >/= 4) was the head (32.0%), followed by chest (20.8%), abdomen (11.5%), and extremities (1.8%). Time from injury to death was available in 2,944 of these trauma deaths. Overall, there were two distinct peaks of deaths: the first peak (50.2% of deaths) occurred within the first hour of injury. The second peak occurred 1 to 6 hours after admission (18.3% of deaths). Only 7.6% of deaths were late (>1 week), during the third peak of the classic trimodal distribution. Temporal distribution of deaths in penetrating trauma was very different from blunt trauma and did not follow the classic trimodal distribution. Other significant independent factors associated with time of death were chest AIS and head AIS. Temporal distribution of deaths as a result of severe head trauma did not follow any pattern and did not resemble classic trimodal distribution at all. The classic "trimodal" distribution of deaths does not apply in our trauma system. Temporal distribution of deaths is influenced by the mechanism of injury, age of the patient, and body area with severe trauma. Knowledge of the time of distribution of deaths might help in allocating trauma resources and focusing research effort.

Unintentional asphyxia, SIDS, and medically explained deaths: a descriptive study of outcomes of child death review (CDR) investigations following sudden unexpected death in infancy.

PubMed

Garstang, Joanna; Ellis, Catherine; Griffiths, Frances; Sidebotham, Peter

2016-12-01

A comprehensive child death review (CDR) program was introduced in England and Wales in 2008, but as yet data have only been analyzed at a local level, limiting the learning from deaths. The aim of this study is to describe the profile of causes and risk factors for sudden unexpected death in infancy (SUDI) as determined by the new CDR program. This was a descriptive outcome study using data from child death overview panel Form C for SUDI cases dying during 2010-2012 in the West Midlands region of England. The main outcome measures were: cause of death, risk factors and potential preventability of death, and determination of deaths probably due to unintentional asphyxia. Data were obtained for 65/70 (93 %) SUDI cases. 20/65 (31 %) deaths were initially categorized as due to medical causes; 21/65 (32 %) as SIDS; and 24/65 (37 %) as undetermined. Reanalysis suggested that 2/21 SIDS and 7/24 undetermined deaths were probably due to unintentional asphyxia, with 6 of these involving co-sleeping and excessive parental alcohol consumption. Deaths classified as "undetermined" had significantly higher total family and environmental risk factor scores (mean 2.6, 95 % CI 2.0-3.3) compared to those classified as SIDS (mean 1.6, 95 % CI 1.2-1.9), or medical causes for death (mean 1.1, 95 % CI 0.8-1.3). 9/20 (47 %) of medical deaths, 19/21 (90 %) SIDS, and 23/24 (96 %) undetermined deaths were considered to be potentially preventable. There were inadequacies in medical provision identified in 5/20 (25 %) of medically explained deaths. The CDR program results in detailed information about risk factors for SUDI cases but failed to recognize deaths probably due to unintentional asphyxia. The misclassification of probable unintentional asphyxial deaths and SIDS as "undetermined deaths" is likely to limit learning from these deaths and inhibit prevention strategies. Many SUDI occurred in families with mental illness, substance misuse and chaotic lifestyles and most in unsafe sleep environments. This knowledge could be used to better target safe sleep advice for vulnerable families and prevent SUDI in the future.

Death Attitudes Among Middle-Aged Koreans: Role of End-of-Life Care Planning and Death Experiences

PubMed Central

Hong, Michin; Hong, Seunghye; Adamek, Margaret E.; Kim, Mee Hye

2017-01-01

The purpose of this study was to examine factors affecting death attitudes among middle-aged Koreans. In addition, the study explored the interaction effect between knowledge about end-of-life care planning and the experience of death of family or friends on death attitudes. The sample was obtained from a national survey with middle-aged adults in South Korea (n = 2,026). Multivariate regression analysis revealed significant main effects and an interaction effect between knowledge about end-of-life care planning and the experience of death on death attitudes. Greater knowledge of end-of-life care planning was associated with more positive attitudes toward death; however, the effect was stronger for those who had not experienced the death of family or friends. Being older and having greater life satisfaction were also associated with more positive attitudes toward death. This study suggests that end-of-life education can help middle-aged adults embrace the final stage of life and prepare for their own death. PMID:28105867

Overview of deaths associated with natural events, United States, 1979-2004.

PubMed

Thacker, Maria T F; Lee, Robin; Sabogal, Raquel I; Henderson, Alden

2008-06-01

Analysis of the National Center for Health Statistics' Compressed Mortality File showed that between 1979 and 2004, natural events caused 21,491 deaths in the United States. During this 26-year period, there were 10,827 cold-related deaths and 5,279 heat-related deaths. Extreme cold or heat accounted for 75 per cent of the total number of deaths attributed to natural events--more than all of deaths resulting from lightning, storms and foods, and earth movements, such as earthquakes and landslides. Cold-related death rates were highest in the states of Alaska, Montana, New Mexico, and South Dakota, while heat-related deaths were highest in the states of Arizona, Missouri, and Arkansas. These deaths occurred more often among the elderly and black men. Other deaths were attributed to lightning (1,906), storms and foods (2,741), and earth movements (738). Most deaths associated with natural events are preventable and society can take action to decrease the morbidity and mortality connected with them.

Death Attitudes Among Middle-Aged Koreans: Role of End-of-Life Care Planning and Death Experiences.

PubMed

Hong, Michin; Hong, Seunghye; Adamek, Margaret E; Kim, Mee Hye

2018-01-01

The purpose of this study was to examine factors affecting death attitudes among middle-aged Koreans. In addition, the study explored the interaction effect between knowledge about end-of-life care planning and the experience of death of family or friends on death attitudes. The sample was obtained from a national survey with middle-aged adults in South Korea ( n = 2,026). Multivariate regression analysis revealed significant main effects and an interaction effect between knowledge about end-of-life care planning and the experience of death on death attitudes. Greater knowledge of end-of-life care planning was associated with more positive attitudes toward death; however, the effect was stronger for those who had not experienced the death of family or friends. Being older and having greater life satisfaction were also associated with more positive attitudes toward death. This study suggests that end-of-life education can help middle-aged adults embrace the final stage of life and prepare for their own death.

Changes in causes of death among persons with AIDS: San Francisco, California, 1996-2011.

PubMed

Schwarcz, Sandra K; Vu, Annie; Hsu, Ling Chin; Hessol, Nancy A

2014-10-01

The increased life expectancy among HIV-infected persons treated with combination antiretroviral therapy (ART), risk behaviors, and co-morbidities associated with ART place HIV-infected persons at risk for non-HIV-related causes of death. We used the San Francisco HIV/AIDS registry to identify deaths that occurred from January 1996 through December 2011. Temporal trends in AIDS- and non-AIDS-related mortality rates, the proportion of underlying and contributory causes of death, and the ratio of observed deaths in the study population to expected number of deaths among California men aged 20-79 (standardized mortality ratio [SMR]) of underlying causes of death were examined. A total of 5338 deaths were identified. The annual AIDS-related death rate (per 100 deaths) declined from 10.8 in 1996 to 0.9 in 2011 (p<0.0001), while the annual death rate from non-AIDS-related causes declined from 2.1 in 1996 to 0.9 in 2011 (p<0.0001). The proportion of deaths due to all types of heart disease combined, all non-AIDS cancers combined, mental disorders resulting from substance abuse, drug overdose, suicide and chronic obstructive pulmonary disease increased significantly over time. The SMRs for liver diseased decreased significantly over time but remained elevated. Our data highlight the importance of age-related causes of death as well as deaths from causes that are, at least in part, preventable.

Death Education as a Learning Experience. SCIP No. 3.

ERIC Educational Resources Information Center

Bensley, Loren B., Jr.

This monograph on death education defines death education, discusses the need for it, and suggests ways of teaching it. Death education is defined as the process by which one explores man's relationship with life. The basic philosophy underlying death education is that through the study of death students will gain an appreciation for life which…

22 CFR 72.5 - Final report of death.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Final report of death. 72.5 Section 72.5... DEATHS AND ESTATES Reporting Deaths of United States Nationals § 72.5 Final report of death. (a) Preparation. Except in the case of the death of an active duty member of the United States Armed Forces, when...

20 CFR 219.23 - Evidence to prove death.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Evidence to prove death. 219.23 Section 219... EVIDENCE REQUIRED FOR PAYMENT Evidence of Age and Death § 219.23 Evidence to prove death. (a) Preferred evidence of death. The best evidence of a person's death is— (1) A certified copy of or extract from the...

20 CFR 219.22 - When evidence of death is required.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false When evidence of death is required. 219.22... EVIDENCE REQUIRED FOR PAYMENT Evidence of Age and Death § 219.22 When evidence of death is required. (a) When evidence of the employee's death is required. Evidence to prove the employee's death is always...

Do We Only Die Once?

ERIC Educational Resources Information Center

Cangemi, Joseph P.

2014-01-01

Some individuals believe physical death is the only form of death we experience on this planet. Is such a belief valid? In the Western world, essentially, physical death is seen as the end of life on this planet. It's all over "here." But is physical death really the only form of death experienced while on earth? Physical death is the…

20 CFR 219.22 - When evidence of death is required.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 1 2011-04-01 2011-04-01 false When evidence of death is required. 219.22... EVIDENCE REQUIRED FOR PAYMENT Evidence of Age and Death § 219.22 When evidence of death is required. (a) When evidence of the employee's death is required. Evidence to prove the employee's death is always...

22 CFR 72.5 - Final report of death.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Final report of death. 72.5 Section 72.5... DEATHS AND ESTATES Reporting Deaths of United States Nationals § 72.5 Final report of death. (a) Preparation. Except in the case of the death of an active duty member of the United States Armed Forces, when...

20 CFR 219.23 - Evidence to prove death.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 1 2011-04-01 2011-04-01 false Evidence to prove death. 219.23 Section 219... EVIDENCE REQUIRED FOR PAYMENT Evidence of Age and Death § 219.23 Evidence to prove death. (a) Preferred evidence of death. The best evidence of a person's death is— (1) A certified copy of or extract from the...

20 CFR 219.23 - Evidence to prove death.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 20 Employees' Benefits 1 2014-04-01 2012-04-01 true Evidence to prove death. 219.23 Section 219.23... REQUIRED FOR PAYMENT Evidence of Age and Death § 219.23 Evidence to prove death. (a) Preferred evidence of death. The best evidence of a person's death is— (1) A certified copy of or extract from the public...

20 CFR 219.23 - Evidence to prove death.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 20 Employees' Benefits 1 2012-04-01 2012-04-01 false Evidence to prove death. 219.23 Section 219... EVIDENCE REQUIRED FOR PAYMENT Evidence of Age and Death § 219.23 Evidence to prove death. (a) Preferred evidence of death. The best evidence of a person's death is— (1) A certified copy of or extract from the...

20 CFR 219.22 - When evidence of death is required.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 20 Employees' Benefits 1 2013-04-01 2012-04-01 true When evidence of death is required. 219.22... EVIDENCE REQUIRED FOR PAYMENT Evidence of Age and Death § 219.22 When evidence of death is required. (a) When evidence of the employee's death is required. Evidence to prove the employee's death is always...

20 CFR 219.23 - Evidence to prove death.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 20 Employees' Benefits 1 2013-04-01 2012-04-01 true Evidence to prove death. 219.23 Section 219.23... REQUIRED FOR PAYMENT Evidence of Age and Death § 219.23 Evidence to prove death. (a) Preferred evidence of death. The best evidence of a person's death is— (1) A certified copy of or extract from the public...

22 CFR 72.5 - Final report of death.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Final report of death. 72.5 Section 72.5... DEATHS AND ESTATES Reporting Deaths of United States Nationals § 72.5 Final report of death. (a) Preparation. Except in the case of the death of an active duty member of the United States Armed Forces, when...

20 CFR 219.22 - When evidence of death is required.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 20 Employees' Benefits 1 2014-04-01 2012-04-01 true When evidence of death is required. 219.22... EVIDENCE REQUIRED FOR PAYMENT Evidence of Age and Death § 219.22 When evidence of death is required. (a) When evidence of the employee's death is required. Evidence to prove the employee's death is always...

22 CFR 72.5 - Final report of death.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Final report of death. 72.5 Section 72.5... DEATHS AND ESTATES Reporting Deaths of United States Nationals § 72.5 Final report of death. (a) Preparation. Except in the case of the death of an active duty member of the United States Armed Forces, when...

20 CFR 219.22 - When evidence of death is required.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 20 Employees' Benefits 1 2012-04-01 2012-04-01 false When evidence of death is required. 219.22... EVIDENCE REQUIRED FOR PAYMENT Evidence of Age and Death § 219.22 When evidence of death is required. (a) When evidence of the employee's death is required. Evidence to prove the employee's death is always...

22 CFR 72.5 - Final report of death.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Final report of death. 72.5 Section 72.5... DEATHS AND ESTATES Reporting Deaths of United States Nationals § 72.5 Final report of death. (a) Preparation. Except in the case of the death of an active duty member of the United States Armed Forces, when...

Confronting Death From Drug Self-Intoxication (DDSI): Prevention Through a Better Definition

PubMed Central

Smith, Gordon S.; Caine, Eric D.; Kapusta, Nestor D.; Hanzlick, Randy L.; Larkin, G. Luke; Naylor, Charles P. E.; Nolte, Kurt B.; Miller, Ted R.; Putnam, Sandra L.; De Leo, Diego; Kleinig, John; Stack, Steven; Todd, Knox H.; Fraser, David W.

2014-01-01

Suicide and other self-directed violence deaths are likely grossly underestimated, reflecting inappropriate classification of many drug intoxication deaths as accidents or unintentional and heterogeneous ascertainment and coding practices across states. As the tide of prescription and illicit drug-poisoning deaths is rising, public health and research needs would be better satisfied by considering most of these deaths a result of self-intoxication. Epidemiologists and prevention scientists could design better intervention strategies by focusing on premorbid behavior. We propose incorporating deaths from drug self-intoxication and investigations of all poisoning deaths into the National Violent Death Reporting System, which contains misclassified homicides and undetermined intent deaths, to facilitate efforts to comprehend and reverse the surging rate of drug intoxication fatalities. PMID:25320874

Place of death for people with HIV: a population-level comparison of eleven countries across three continents using death certificate data.

PubMed

Harding, Richard; Marchetti, Stefano; Onwuteaka-Philipsen, Bregje D; Wilson, Donna M; Ruiz-Ramos, Miguel; Cardenas-Turanzas, Maria; Rhee, YongJoo; Morin, Lucas; Hunt, Katherine; Teno, Joan; Hakanson, Cecilia; Houttekier, Dirk; Deliens, Luc; Cohen, Joachim

2018-01-25

With over 1 million HIV-related deaths annually, quality end-of-life care remains a priority. Given strong public preference for home death, place of death is an important consideration for quality care. This 11 country study aimed to i) describe the number, proportion of all deaths, and demographics of HIV-related deaths; ii) identify place of death; iii) compare place of death to cancer patients iv), determine patient/health system factors associated with place of HIV-related death. In this retrospective analysis of death certification, data were extracted for the full population (ICD-10 codes B20-B24) for 1-year period: deceased's demographic characteristics, place of death, healthcare supply. i) 19,739 deaths were attributed to HIV. The highest proportion (per 1000 deaths) was for Mexico (9.8‰), and the lowest Sweden (0.2‰). The majority of deaths were among men (75%), and those aged <50 (69.1%). ii) Hospital was most common place of death in all countries: from 56.6% in the Netherlands to 90.9% in South Korea. The least common places were hospice facility (3.3%-5.7%), nursing home (0%-17.6%) and home (5.9%-26.3%).iii) Age-standardised relative risks found those with HIV less likely to die at home and more likely to die in hospital compared with cancer patients, and in most countries more likely to die in a nursing home. iv) Multivariate analysis found that men were more likely to die at home in UK, Canada, USA and Mexico; a greater number of hospital beds reduced the likelihood of dying at home in Italy and Mexico; a higher number of GPs was associated with home death in Italy and Mexico. With increasing comorbidity among people ageing with HIV, it is essential that end-of-life preferences are established and met. Differences in place of death according to country and diagnosis demonstrate the importance of ensuring a "good death" for people with HIV, alongside efforts to optimise treatment.

Measuring chronic liver disease mortality using an expanded cause of death definition and medical records in Connecticut, 2004.

PubMed

Ly, Kathleen N; Speers, Suzanne; Klevens, R Monina; Barry, Vaughn; Vogt, Tara M

2014-10-16

Chronic liver disease (CLD) is a leading cause of death and is defined based on a specific set of underlying cause-of-death codes on death certificates. This conventional approach to measuring CLD mortality underestimates the true mortality burden because it does not consider certain CLD conditions like viral hepatitis and hepatocellular carcinoma. We measured how much the conventional CLD mortality case definition will underestimate CLD mortality and described the distribution of CLD etiologies in Connecticut. We used 2004 Connecticut death certificates to estimate CLD mortality two ways. One way used the conventional definition and the other used an expanded definition that included more conditions suggestive of CLD. We compared the number of deaths identified using this expanded definition with the number identified using the conventional definition. Medical records were reviewed to confirm CLD deaths. Connecticut had 29 314 registered deaths in 2004. Of these, 282 (1.0%) were CLD deaths identified by the conventional CLD definition while 616 (2.1%) were CLD deaths defined by the expanded definition. Medical record review confirmed that most deaths identified by the expanded definition were CLD-related (550/616); this suggested a 15.8 deaths/100 000 population mortality rate. Among deaths for which hepatitis B, hepatitis C and alcoholic liver disease were identified during medical record review, only 8.6%, 45.4% and 36.5%, respectively, had that specific cause-of-death code cited on the death certificate. An expanded CLD mortality case definition that incorporates multiple causes of death and additional CLD-related conditions will better estimate CLD mortality. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.

DISTINCT FUNCTIONS OF JNK AND C-JUN IN OXIDANT-INDUCED HEPATOCYTE DEATH

PubMed Central

Amir, Muhammad; Liu, Kun; Zhao, Enpeng; Czaja, Mark J.

2013-01-01

Overactivation of c-Jun N-terminal kinase (JNK)/c-Jun signaling is a central mechanism of hepatocyte injury and death including that from oxidative stress. However, the functions of JNK and c-Jun are still unclear, and this pathway also inhibits hepatocyte death. Previous studies of menadione-induced oxidant stress demonstrated that toxicity resulted from sustained JNK/c-Jun activation as death was blocked by the c-Jun dominant negative TAM67. To further delineate the function of JNK/c-Jun signaling in hepatocyte injury from oxidant stress, the effects of direct JNK inhibition on menadione-induced death were examined. In contrast to the inhibitory effect of TAM67, pharmacological JNK inhibition by SP600125 sensitized the rat hepatocyte cell line RALA255-10G to death from menadione. SP600125 similarly sensitized mouse primary hepatocytes to menadione toxicity. Death from SP600125/menadione was c-Jun dependent as it was blocked by TAM67, but independent of c-Jun phosphorylation. Death occurred by apoptosis and necrosis and activation of the mitochondrial death pathway. Short hairpin RNA knockdowns of total JNK or JNK2 sensitized to death from menadione, whereas a jnk1 knockdown was protective. Jnk2 null mouse primary hepatocytes were also sensitized to menadione death. JNK inhibition magnified decreases in cellular ATP content and β-oxidation induced by menadione. This effect mediated cell death as chemical inhibition of β-oxidation also sensitized cells to death from menadione, and supplementation with the β-oxidation substrate oleate blocked death. Components of the JNK/c-Jun signaling pathway have opposing functions in hepatocyte oxidant stress with JNK2 mediating resistance to cell death and c-Jun promoting death. PMID:22644775

Quantifying cause-related mortality by weighting multiple causes of death

PubMed Central

Moreno-Betancur, Margarita; Lamarche-Vadel, Agathe; Rey, Grégoire

2016-01-01

Abstract Objective To investigate a new approach to calculating cause-related standardized mortality rates that involves assigning weights to each cause of death reported on death certificates. Methods We derived cause-related standardized mortality rates from death certificate data for France in 2010 using: (i) the classic method, which considered only the underlying cause of death; and (ii) three novel multiple-cause-of-death weighting methods, which assigned weights to multiple causes of death mentioned on death certificates: the first two multiple-cause-of-death methods assigned non-zero weights to all causes mentioned and the third assigned non-zero weights to only the underlying cause and other contributing causes that were not part of the main morbid process. As the sum of the weights for each death certificate was 1, each death had an equal influence on mortality estimates and the total number of deaths was unchanged. Mortality rates derived using the different methods were compared. Findings On average, 3.4 causes per death were listed on each certificate. The standardized mortality rate calculated using the third multiple-cause-of-death weighting method was more than 20% higher than that calculated using the classic method for five disease categories: skin diseases, mental disorders, endocrine and nutritional diseases, blood diseases and genitourinary diseases. Moreover, this method highlighted the mortality burden associated with certain diseases in specific age groups. Conclusion A multiple-cause-of-death weighting approach to calculating cause-related standardized mortality rates from death certificate data identified conditions that contributed more to mortality than indicated by the classic method. This new approach holds promise for identifying underrecognized contributors to mortality. PMID:27994280

Evaluating an educational intervention to improve the accuracy of death certification among trainees from various specialties

PubMed Central

Villar, Jesús; Pérez-Méndez, Lina

2007-01-01

Background The inaccuracy of death certification can lead to the misallocation of resources in health care programs and research. We evaluated the rate of errors in the completion of death certificates among medical residents from various specialties, before and after an educational intervention which was designed to improve the accuracy in the certification of the cause of death. Methods A 90-min seminar was delivered to seven mixed groups of medical trainees (n = 166) from several health care institutions in Spain. Physicians were asked to read and anonymously complete a same case-scenario of death certification before and after the seminar. We compared the rates of errors and the impact of the educational intervention before and after the seminar. Results A total of 332 death certificates (166 completed before and 166 completed after the intervention) were audited. Death certificates were completed with errors by 71.1% of the physicians before the educational intervention. Following the seminar, the proportion of death certificates with errors decreased to 9% (p < 0.0001). The most common error in the completion of death certificates was the listing of the mechanism of death instead of the cause of death. Before the seminar, 56.8% listed respiratory or cardiac arrest as the immediate cause of death. None of the participants listed any mechanism of death after the educational intervention (p < 0.0001). Conclusion Major errors in the completion of the correct cause of death on death certificates are common among medical residents. A simple educational intervention can dramatically improve the accuracy in the completion of death certificates by physicians. PMID:18005414

The meaning of self-reported death anxiety in advanced cancer.

PubMed

Tong, Eryn; Deckert, Amy; Gani, Nina; Nissim, Rinat; Rydall, Anne; Hales, Sarah; Rodin, Gary; Lo, Chris

2016-09-01

Death anxiety is important but understudied in palliative care. New self-report measurements have been developed, but their interpretation and clinical utility may not be evident. To inform our understanding of death anxiety in patients with advanced cancer by exploring the relationship between this self-reported symptom and its clinical presentation. Participants were part of a psychotherapy trial in advanced cancer. First therapy session transcripts were analyzed using interpretive description in patients reporting low, moderate, and high death anxiety on the Death and Dying Distress Scale (DADDS). A total of 16 participants (10 women and 6 men) with advanced or metastatic cancer were sampled from the Princess Margaret Cancer Centre, Toronto, Canada. Six participants reported low death anxiety scores (Death and Dying Distress Scale: 0-19), five moderate (Death and Dying Distress Scale: 20-50), and five high (Death and Dying Distress Scale: 51-75). The low death anxiety group exhibited psychological readiness for death, or contrastingly, non-reflectiveness about death. The moderate group recognized the imminence of mortality, which impacted treatment decisions and future plans. Prior experience with death was discussed as raising the salience of mortality. The high group felt dominated by powerful emotions and could not make sense of their situation. Their distress was exacerbated by substantial relational concerns. Self-reported death anxiety is affected by the awareness and ability to reflect on mortality. Death and Dying Distress Scale scores may facilitate exploration of this symptom as part of a clinical assessment and may serve to guide treatment approaches. Greater attention to death anxiety is consistent with and recommended by contemporary approaches to palliative care. © The Author(s) 2016.

Drug-related celebrity deaths: A cross-sectional study.

PubMed

Just, Johannes M; Bleckwenn, Markus; Schnakenberg, Rieke; Skatulla, Philipp; Weckbecker, Klaus

2016-12-09

Celebrities are at risk for premature mortality as well as drug-related death. Despite being a vulnerable patient group, celebrities influence people's health behaviours through biological, psychological and social processes. Therefore, celebrity endorsement of the topic could be one way to challenge the current "opioid endemic". Our aim was to better understand the factors surrounding drug-related celebrity deaths by investigating the incidence as well as substances used between 1970 and 2015 using a cross-sectional study design. We searched public databases for drug-related celebrity deaths between 1970 and 2015. They were categorized for sex, profession, age at death, year of death and substances involved. The main outcome measures are descriptive values including number of drug deaths per year and substances involved. Secondary outcome measures are analytical questions to examine whether and which factors influence age at death and year of death (e.g. type of substance use disorder). We identified 220 celebrities who died a drug-related death with a clear indication of involved substances between 1970 and 2015. The average age at death was 38.6 years; 75% were male. Most celebrities died between the age of 25 and 40. The number of drug-related deaths increased in the 21st century, with a significant increase in the use of prescription opioids. Deaths involving prescription opioids and heroin were associated with a significantly lower mean age at death compared to deaths where these substances were not involved. Compared to the 20th century, the total number of celebrities who died from a drug-related death in the 21st century increased, possibly due to an increased involvement of prescription opioids. Negative effects on individual health decisions of celebrity's followers could be the result.

Maternal and pregnancy-related death: causes and frequencies in an autopsy study population.

PubMed

Buschmann, Claas; Schmidbauer, Martina; Tsokos, Michael

2013-09-01

Maternal deaths during pregnancy, both from pregnancy-related or other causes, are rare in Western industrialized countries. In this study we report maternal and pregnancy-related deaths in a large autopsy population focusing on medical history, autopsy findings and histological examinations. Medico-legal autopsy files (n = 11,270) from the Institute of Legal Medicine and Forensic Sciences, University Medical Centre Charité, University of Berlin, and the State Institute of Legal and Social Medicine, Berlin, from 2005 to 2010 were reviewed. All female cases between 15 and 49 years were checked for maternal and pregnancy-related death, and deaths of pregnant women from non-natural causes were also included. Fatalities that met the chosen criteria were classified as "direct gestational death," "indirect gestational death" or "non-gestational death." 13 female fatalities (0.12 %) met the chosen criteria (median age 28 years ± 6.87 SD). Eight (61.5 %) women died in-hospital, four (30.8 %) at home, and one woman died in public. Three cases (23.1 %) were "non-gestational deaths," and one case (7.7 %) remained unclear after autopsy and additional examinations. Of the remaining nine cases, six cases (46.5 %) were "direct gestational deaths," and two cases (15.4 %) were "indirect gestational deaths." One case (7.7 %) was not to be defined as "late maternal death," but the cause of death seemed to be directly related to previous gestation ["(very) late maternal death"]. Maternal deaths during pregnancy, both from pregnancy-related or other causes, remain an uncommon event in routine forensic autopsy practice. We report on the collection and analysis of maternal and pregnancy-related deaths in a large autopsy population, with particular attention to the phenomenology of pregnancy, pathophysiological changes in different organ systems and their detection, and the forensic autopsy assessment.

Congenital heart disease infant death rates decrease as gestational age advances from 34 to 40 weeks.

PubMed

Cnota, James F; Gupta, Resmi; Michelfelder, Erik C; Ittenbach, Richard F

2011-11-01

To describe congenital heart disease death rates in infants born between 34 and 40 weeks, estimate the relationship between gestational age and congenital heart disease infant death rates, and compare congenital heart disease death rates across 1- and 2-week intervals in gestational age. The 2000 to 2003 national linked birth/infant death cohort datasets were obtained. Congenital heart disease deaths were identified by using International Statistical Classification of Diseases, 10th Revision codes. Proportional death rates were calculated by using congenital heart disease deaths and all live births. The relationship between congenital heart disease death rates and gestational age was determined. Death rates were compared across intervals. A total of 14.9 million records were analyzed. Congenital heart disease deaths occurred in 4736 infants (0.04%) born between 34 and 40 weeks. There was a significant, negative linear relationship between congenital heart disease death rate and gestational age (R(2) = 0.97). Comparisons across 1-week intervals varied (P = .02-.23). All 2-week intervals were statistically significant (P < .01). Congenital heart disease death rates decrease as gestational age approaches 40 weeks. These results should be considered before elective delivery for the sole indication of prenatally diagnosed congenital heart disease. Copyright © 2011 Mosby, Inc. All rights reserved.

Death after legally induced abortion. A comprehensive approach for determination of abortion-related deaths based on record linkage.

PubMed Central

Shelton, J D; Schoenbucher, A K

1978-01-01

The sources for determination of abortion-related deaths in Georgia are the cause of death listed on the death certificate and reports from informal reporting channels. Although Georgia residents 10-44 years of age obtained 19,877 induced abortions in 1975, no deaths related to abortion were found through these two usual sources. To determine the sensitivity of this system, all abortion certificates for 1975 were compared with all death certificates of Georgia females aged 10-44 who died in 1975 and the first 2 months of 1976. Based on the age and racial distribution of the women who received abortions, approximately 13 deaths (from all causes) would be expected to have subsequently occurred during the period of time studied. The authors found only 10. From national death-to-case rates for legal abortion, the expected number actually atrributable to abortion was 0.78 death. Of the 10 deaths, 2 were potentially related to the previous abortion, but a causal relationship to the preceding abortion was not clearly evident for any of the 10 deaths. The data, therefore, tend to support the assertion that no large numbers of deaths related to abortion are undiscovered and that current measurements of abortion mortality are accurate. Images p376-a PMID:684149

Anthranilate Fluorescence Marks a Calcium-Propagated Necrotic Wave That Promotes Organismal Death in C. elegans

PubMed Central

Coburn, Cassandra; Allman, Erik; Mahanti, Parag; Benedetto, Alexandre; Cabreiro, Filipe; Pincus, Zachary; Matthijssens, Filip; Araiz, Caroline; Mandel, Abraham; Vlachos, Manolis; Edwards, Sally-Anne; Fischer, Grahame; Davidson, Alexander; Pryor, Rosina E.; Stevens, Ailsa; Slack, Frank J.; Tavernarakis, Nektarios; Braeckman, Bart P.; Schroeder, Frank C.; Nehrke, Keith; Gems, David

2013-01-01

For cells the passage from life to death can involve a regulated, programmed transition. In contrast to cell death, the mechanisms of systemic collapse underlying organismal death remain poorly understood. Here we present evidence of a cascade of cell death involving the calpain-cathepsin necrosis pathway that can drive organismal death in Caenorhabditis elegans. We report that organismal death is accompanied by a burst of intense blue fluorescence, generated within intestinal cells by the necrotic cell death pathway. Such death fluorescence marks an anterior to posterior wave of intestinal cell death that is accompanied by cytosolic acidosis. This wave is propagated via the innexin INX-16, likely by calcium influx. Notably, inhibition of systemic necrosis can delay stress-induced death. We also identify the source of the blue fluorescence, initially present in intestinal lysosome-related organelles (gut granules), as anthranilic acid glucosyl esters—not, as previously surmised, the damage product lipofuscin. Anthranilic acid is derived from tryptophan by action of the kynurenine pathway. These findings reveal a central mechanism of organismal death in C. elegans that is related to necrotic propagation in mammals—e.g., in excitotoxicity and ischemia-induced neurodegeneration. Endogenous anthranilate fluorescence renders visible the spatio-temporal dynamics of C. elegans organismal death. PMID:23935448

Adjusted hospital death rates: a potential screen for quality of medical care.

PubMed

Dubois, R W; Brook, R H; Rogers, W H

1987-09-01

Increased economic pressure on hospitals has accelerated the need to develop a screening tool for identifying hospitals that potentially provide poor quality care. Based upon data from 93 hospitals and 205,000 admissions, we used a multiple regression model to adjust the hospitals crude death rate. The adjustment process used age, origin of patient from the emergency department or nursing home, and a hospital case mix index based on DRGs (diagnostic related groups). Before adjustment, hospital death rates ranged from 0.3 to 5.8 per 100 admissions. After adjustment, hospital death ratios ranged from 0.36 to 1.36 per 100 (actual death rate divided by predicted death rate). Eleven hospitals (12 per cent) were identified where the actual death rate exceeded the predicted death rate by more than two standard deviations. In nine hospitals (10 per cent), the predicted death rate exceeded the actual death rate by a similar statistical margin. The 11 hospitals with higher than predicted death rates may provide inadequate quality of care or have uniquely ill patient populations. The adjusted death rate model needs to be validated and generalized before it can be used routinely to screen hospitals. However, the remaining large differences in observed versus predicted death rates lead us to believe that important differences in hospital performance may exist.

Later rather than sooner: the impact of clinical management on timing and modes of death in the last decade.

PubMed

Dupont-Thibodeau, Amélie; Langevin, Rosalie; Janvier, Annie

2014-11-01

Technological and clinical advances have reduced neonatal deaths, and this study explored how the mode and timing of neonatal deaths has changed in a tertiary neonatal intensive care unit (NICU) over 10 years. We carried out a retrospective chart review on NICU deaths in 2000-2002 and 2007-2010, categorising deaths and compared the timing, cause and mode of death in the two cohorts. We analysed 204 neonatal deaths and found that the average age at death doubled from 9.71 days in 2000-2002 to 18.8 days (p = 0.014) in 2007-2010 and that the number of deaths in the first 48 h of life fell from 52% to 29% (p < 0.001). Mode of death and ethical decision-making was similar. In both cohorts, 26% of patients who died had a do not resuscitate order and 9% of the 151 patients without an order died while receiving cardiopulmonary resuscitation. Most neonates received medication to keep them comfortable and their use was similar in both cohorts. Changes in neonatal management have led to a reduction in early deaths and an increase in age at death. The impact of later deaths on families and healthcare providers deserves further research. ©2014 Foundation Acta Paediatrica. Published by John Wiley & Sons Ltd.

The role of forensic death investigators interacting with the survivors of death by homicide and suicide.

PubMed

Baumann, Robin; Stark, Sharon

2015-01-01

When sudden unexpected death occurs, an investigation ensues in an attempt to discover the cause and manner of death. Autopsies are performed when reasons for death are not obvious. They are used to provide information, confirm the cause of death, and/or reveal conditions not recognized before death (Hendricks, 2011). One important reason for performing an autopsy is to help families to understand what happened to their loved one so that they can begin the process of grieving. The way that the initial notification and investigation is handled can have a bearing on how a family's grief progresses. Forensic nurses are in a unique position to bring a holistic approach to death investigation with a focus of care that includes not only the decedent but the surviving loved ones as well (Koehler, 2008). Forensic nurse death investigators can assist families through initial stages of grief in the investigation of death.

The Relation Between Death Attitude and Distress: Tolerance, Aggression, and Anger.

PubMed

Esnaashari, Fatemeh; Kargar, Flor Rezaei

2018-06-01

The aim of this research was to determine the relation between death attitude and distress tolerance and aggression and anger. For this, 135 subjects among 7,535 professional and specialist members of the Iran National Library were selected using convenience sampling method. They replied to Death Attitudes Profile-Revised, distress tolerance questionnaire, and aggression questionnaire. The results showed that the attitudes of approach acceptance, neutral acceptance, and escape acceptance had positive relation to distress tolerance and negative relation to aggression and anger while the attitudes of fear of death and death avoidance had negative relation to distress tolerance and positive relation to aggression and anger. Furthermore, all death attitudes predicted distress tolerance. But only the attitudes of approach acceptance, escape acceptance, fear of death, and death avoidance predicted aggression, and only approach acceptance, neutral acceptance, fear of death, and death avoidance predicted anger.

Opioid Deaths in Milwaukee County, Wisconsin 2013-2017: The Primacy of Heroin and Fentanyl.

PubMed

Peterson, Brian L; Schreiber, Sara; Fumo, Nicole; Brooke Lerner, E

2018-04-23

Heroin and fentanyl are the overwhelming and increasing cause of opioid deaths in Milwaukee County, Wisconsin. We reviewed all drug and opioid deaths from 2013 to 2017 to delineate the specific opioid drugs involved and changes in their incidence. From 2013 to 2017, 980 deaths were due to opioids, rising from 184 in 2013 to 337 in 2017. In 2017, opioid deaths exceeded combined non-natural deaths from homicide and suicide. Illicit heroin and fentanyl/analogs caused 84% of opioid deaths and 80% of drug deaths, with no increase in deaths due to oral prescription drugs such as oxycodone and hydrocodone. Any approach to decreasing this dramatic increase in opioid deaths should first focus on interdicting the supply and cheap availability of these illicit opioids. Fentanyl and its analogs represent the most deadly opioids and the greatest threat to human life in our population. © 2018 American Academy of Forensic Sciences.

[Preserving life and limb on the stage of death: the Dance of Death by Dr Salomon van Rusting].

PubMed

Dreier, Rolf P; Mackenbach, Johan P

2012-01-01

Salomon van Rusting was a medical doctor from Amsterdam who lived and worked around the early 1700 s. He wrote one of the few Dutch Death Dances, naming it 'Het Schouw-Tooneel des Doods'. A Death Dance was an artistic expression of human death popular in the Late Middle Ages. The traditional Death Dance invited acknowledgement of the vanity of worldly existence ('memento mori') by portraying human subjects' encounters with 'Death'. This paper describes the context in which Van Rusting's work arose and briefly characterizes its highly original and, for the most part, rather burlesque nature. In contrast to other Death Dances, Van Rusting's work does not represent medicine as being powerless in the face of death. His work strikes us as having almost modern confidence in our own ability to avoid an untimely death by living sensibly.

Sibling death and death fear in relation to depressive symptomatology in older adults.

PubMed

Cicirelli, Victor G

2009-01-01

Previously overlooked factors in elders' depressive symptomatology were examined, including death fear, sibling death, and sibling closeness. Participants were 150 elders (61 men, 89 women) aged 65-97 years with at least one sibling. Measures were proportion of deceased siblings, sibling closeness, the Death Fear Subscale of the Death Attitude Profile-Revised, and the Center for Epidemiological Studies-Depression scale (20-item adult form). Age and education were exogenous variables in a structural equation model. Death fear, sibling closeness, and proportion of dead siblings were directly related to depression, with path coefficients of .42, -.24, and .13, respectively. Proportion of dead siblings had indirect effects on depression, as did age and education. Depressive symptomatology in old age is influenced by death fear related to sibling death as well as by poor relationships with them; it must be understood within a situational context including death fear and sibling relationships.

Changing epidemiology of trauma deaths leads to a bimodal distribution

PubMed Central

Gunst, Mark; Ghaemmaghami, Vafa; Gruszecki, Amy; Urban, Jill; Frankel, Heidi

2010-01-01

Injury mortality was classically described with a trimodal distribution, with immediate deaths at the scene, early deaths due to hemorrhage, and late deaths from organ failure. We hypothesized that the development of trauma systems has improved prehospital care, early resuscitation, and critical care and altered this pattern. This population-based study of all trauma deaths in an urban county with a mature trauma system reviewed data for 678 patients (median age, 33 years; 81% male; 43% gunshot, 20% motor vehicle crashes). Deaths were classified as immediate (scene), early (in hospital, ≤4 hours from injury), or late (>4 hours after injury). Multinomial regression was used to identify independent predictors of immediate and early versus late deaths, adjusted for age, gender, race, intention, mechanism, toxicology, and cause of death. Results showed 416 (61%) immediate, 199 (29%) early, and 63 (10%) late deaths. Compared with the classical description, the percentage of immediate deaths remained unchanged, and early deaths occurred much earlier (median 52 vs 120 minutes). However, unlike the classic trimodal distribution, the late peak was greatly diminished. Intentional injuries, alcohol intoxication, asphyxia, and injuries to the head and chest were independent predictors of immediate death. Alcohol intoxication and injuries to the chest were predictors of early death, while pelvic fractures and blunt assaults were associated with late deaths. In conclusion, trauma deaths now have a predominantly bimodal distribution. Near elimination of the late peak likely represents advancements in resuscitation and critical care that have reduced organ failure. Further reductions in mortality will likely come from prevention of intentional injuries and injuries associated with alcohol intoxication. PMID:20944754

Heart Disease and Cancer Deaths - Trends and Projections in the United States, 1969-2020.

PubMed

Weir, Hannah K; Anderson, Robert N; Coleman King, Sallyann M; Soman, Ashwini; Thompson, Trevor D; Hong, Yuling; Moller, Bjorn; Leadbetter, Steven

2016-11-17

Heart disease and cancer are the first and second leading causes of death in the United States. Age-standardized death rates (risk) have declined since the 1960s for heart disease and for cancer since the 1990s, whereas the overall number of heart disease deaths declined and cancer deaths increased. We analyzed mortality data to evaluate and project the effect of risk reduction, population growth, and aging on the number of heart disease and cancer deaths to the year 2020. We used mortality data, population estimates, and population projections to estimate and predict heart disease and cancer deaths from 1969 through 2020 and to apportion changes in deaths resulting from population risk, growth, and aging. We predicted that from 1969 through 2020, the number of heart disease deaths would decrease 21.3% among men (-73.9% risk, 17.9% growth, 34.7% aging) and 13.4% among women (-73.3% risk, 17.1% growth, 42.8% aging) while the number of cancer deaths would increase 91.1% among men (-33.5% risk, 45.6% growth, 79.0% aging) and 101.1% among women (-23.8% risk, 48.8% growth, 76.0% aging). We predicted that cancer would become the leading cause of death around 2016, although sex-specific crossover years varied. Risk of death declined more steeply for heart disease than cancer, offset the increase in heart disease deaths, and partially offset the increase in cancer deaths resulting from demographic changes over the past 4 decades. If current trends continue, cancer will become the leading cause of death by 2020.

The Study of Personal Constructs of Death and Fear of Death among Taiwanese Adolescents

ERIC Educational Resources Information Center

Yang, Shu Ching; Chen, Shih-Fen

2009-01-01

This study administered an open-ended questionnaire about death and the Multidimensional Fear of Death Scale (MODS) to explore the relationships between personal constructs about death and fears of death among Taiwanese adolescents. The sample included 329 adolescents in junior and senior high school grades 7 to 12. A coding manual was used to…

Death Attitudes and Changes in Existential Outlook in Parents of Vulnerable Newborns.

PubMed

Barr, Peter

2015-01-01

This study is an Actor-Partner Interdependence Model analysis of the relation of death attitudes with changes in outlook in 59 parent couples of neonatal intensive care newborns. Death attitudes effects with changes in outlook were mostly intrapersonal and they mainly occurred in fathers, though between gender differences were not usually significant. Death avoidance and neutral death acquiescence were positive predictors of positive changes in outlook, and fear of death and neutral death acquiescence were respective positive and inverse predictors of negative changes. Multidimensional measures of death attitudes and personal change should be used when studying these domains of psychological functioning.

[Death on the operating table and death in the early post-operative period : recommendations of forensic pathologists].

PubMed

Wolff-Maras, R; Klintschar, M

2012-07-01

Death during an operation represents a severe event for physicians and family of the deceased. A further difficulty arises when certifying the cause and manner of death because medical staff are often afraid that they will incriminate themselves when declaring an unnatural death or an unclear manner of death but are also afraid to issue a false statement by declaring a natural death. In such cases of mors in tabula it is recommended to declare an unclear manner of death because this leads to police investigations and in the majority of the cases to exoneration of the medical staff.

Perceptions of good and bad death among Korean social workers in elderly long-term care facilities.

PubMed

Kim, Eunkyung

2018-06-20

This qualitative study explored the perception of good and bad death among 15 social workers serving in elderly care facilities in Korea. A good death involved dying peacefully without much suffering, dying with family members present, death following a good life, and believing in a better afterlife. A bad death involved burdening children in the dying process, dying after extensive illness, dying isolated from family, and death from suicide. To ensure a good death and avoid a bad death for elders, social workers are encouraged to closely engage with not only elders but also their families.

Causes of Death Among 379 Patients With Hemophilia: A Developing Country's Report.

PubMed

Mansouritorghabeh, Hassan; Rahimi, Hossein; Mohades, Seyed Tahereh; Behboudi, Maryam

2018-05-01

There are steps to achieve an optimum life for patients with hemophilia in developing countries, and awareness of the pattern of death in patients with hemophilia is a prerequisite for any health-care program. Owing to the lack of any data on the pattern of death in patients with hemophilia from developing countries, the current study was done to address common causes of death, and the spectrum of causes of death among individuals with hemophilia A and B. To address the pattern of death in northeast of Iran, we retrospectively collected demographic data regarding deceased patients with hemophilia A and B. Overall, among 379 people with hemophilia A and B, there were 46 deaths. Thirty-two deaths happened in the severe forms of the diseases. The obtained results show the patterns of death in the patients studied are not as parallel as some reports from the developed countries. Traumatic and spontaneous bleeding events were the main causes of death. The trend of death shows a decrease in the current decade post better therapeutic facilities. Evaluation of causes of death in hemophilia can be a useful indicator for managing the efficacy of health care in the current patients.

Preventable causes of death in Wisconsin, 2004.

PubMed

Vila, Peter M; Booske, Bridget C; Wegner, Mark V; Remington, Patrick L

2007-10-01

While heart disease, cancer, and injuries are leading proximate causes of death, research has demonstrated that about half of all deaths in the United States are actually due to preventable causes, including tobacco use, poor diet, and physical inactivity. Using state vital statistics data and findings from national studies, we report on the trends in the preventable causes of death in Wisconsin from 1992 to 2004. The leading proximate causes of death in Wisconsin were obtained from Wisconsin Interactive Statistics on Health (WISH) data derived from individual death certificates. Information on the preventable causes of death was either obtained from the underlying cause information on the death certificate or from peer-reviewed epidemiologic studies. While the overall age-adjusted death rate declined from 837 to 744 per 100,000 from 1992 to 2004, the top 10 causes of death remain largely unchanged. Nearly half of the deaths in Wisconsin in 2004 resulted from 11 preventable causes, similar to the findings in 1992. Epidemiologic research demonstrates that nearly half of all deaths in Wisconsin are due to preventable causes. Programs and policies must continue to address these preventable causes of disease if Wisconsin is to meet its goal of promoting and protecting population health.

Pediatric Donation After Circulatory Determination of Death: A Scoping Review.

PubMed

Weiss, Matthew J; Hornby, Laura; Witteman, William; Shemie, Sam D

2016-03-01

Although pediatric donation after circulatory determination of death is increasing in frequency, there are no national or international donation after circulatory determination of death guidelines specific to pediatrics. This scoping review was performed to map the pediatric donation after circulatory determination of death literature, identify pediatric donation after circulatory determination of death knowledge gaps, and inform the development of national or regional pediatric donation after circulatory determination of death guidelines. Terms related to pediatric donation after circulatory determination of death were searched in Embase and MEDLINE, as well as the non-MEDLINE sources in PubMed from 1980 to May 2014. Seven thousand five hundred ninety-seven references were discovered and 85 retained for analysis. All references addressing pediatric donation after circulatory determination of death were considered. Exclusion criteria were articles that did not address pediatric patients, animal or laboratory studies, surgical techniques, and local pediatric donation after circulatory determination of death protocols. Narrative reviews and opinion articles were the most frequently discovered reference (25/85) and the few discovered studies were observational or qualitative and almost exclusively retrospective. Retained references were divided into themes and analyzed using qualitative methodology. The main discovered themes were 1) studies estimating the number of potential pediatric donation after circulatory determination of death donors and their impact on donation; 2) ethical issues in pediatric donation after circulatory determination of death; 3) physiology of the dying process after withdrawal of life-sustaining therapy; 4) cardiac pediatric donation after circulatory determination of death; and 5) neonatal pediatric donation after circulatory determination of death. Donor estimates suggest that pediatric donation after circulatory determination of death will remain an event less common than brain death, albeit with the potential to substantially expand the existing organ donation pool. Limited data suggest outcomes comparable with organs donated after neurologic determination of death. Although there is continued debate around ethical aspects of pediatric donation after circulatory determination of death, all pediatric donation after circulatory determination of death publications from professional societies contend that pediatric donation after circulatory determination of death can be practiced ethically. This review provides a comprehensive overview of the published literature related to pediatric donation after circulatory determination of death. In addition to informing the development of pediatric-specific guidelines, this review serves to highlight several important knowledge gaps in this topic.

The quality of medical death certification of cause of death in hospitals in rural Bangladesh: impact of introducing the International Form of Medical Certificate of Cause of Death.

PubMed

Hazard, Riley H; Chowdhury, Hafizur Rahman; Adair, Tim; Ansar, Adnan; Quaiyum Rahman, A M; Alam, Saidul; Alam, Nurul; Rampatige, Rasika; Streatfield, Peter Kim; Riley, Ian Douglas; Lopez, Alan D

2017-10-02

Accurate and timely data on cause of death are critically important for guiding health programs and policies. Deaths certified by doctors are implicitly considered to be reliable and accurate, yet the quality of information provided in the international Medical Certificate of Cause of Death (MCCD) usually varies according to the personnel involved in certification, the diagnostic capacity of the hospital, and the category of hospitals. There are no published studies that have analysed how certifying doctors in Bangladesh adhere to international rules when completing the MCCD or have assessed the quality of clinical record keeping. The study took place between January 2011 and April 2014 in the Chandpur and Comilla districts of Bangladesh. We introduced the international MCCD to all study hospitals. Trained project physicians assigned an underlying cause of death, assessed the quality of the death certificate, and reported the degree of certainty of the medical records provided for a given cause. We examined the frequency of common errors in completing the MCCD, the leading causes of in-hospital deaths, and the degree of certainty in the cause of death data. The study included 4914 death certificates. 72.9% of medical records were of too poor quality to assign a cause of death, with little difference by age, hospital, and cause of death. 95.6% of death certificates did not indicate the time interval between onset and death, 31.6% required a change in sequence, 13.9% required to include a new diagnosis, 50.7% used abbreviations, 41.5% used multiple causes per line, and 33.2% used an ill-defined condition as the underlying cause of death. 99.1% of death certificates had at least one error. The leading cause of death among adults was stroke (15.8%), among children was pneumonia (31.7%), and among neonates was birth asphyxia (52.8%). Physicians in Bangladeshi hospitals had difficulties in completing the MCCD correctly. Physicians routinely made errors in death certification practices and medical record quality was poor. There is an urgent need to improve death certification practices and the quality of hospital data in Bangladesh if these data are to be useful for policy.

Maternal death audit in Rwanda 2009–2013: a nationwide facility-based retrospective cohort study

PubMed Central

Sayinzoga, Felix; Bijlmakers, Leon; van Dillen, Jeroen; Mivumbi, Victor; Ngabo, Fidèle; van der Velden, Koos

2016-01-01

Objective Presenting the results of 5 years of implementing health facility-based maternal death audits in Rwanda, showing maternal death classification, identification of substandard (care) factors that have contributed to death, and conclusive recommendations for quality improvements in maternal and obstetric care. Design Nationwide facility-based retrospective cohort study. Settings All cases of maternal death audited by district hospital-based audit teams between January 2009 and December 2013 were reviewed. Maternal deaths that were not subjected to a local audit are not part of the cohort. Population 987 audited cases of maternal death. Main outcome measures Characteristics of deceased women, timing of onset of complications, place of death, parity, gravida, antenatal clinic attendance, reported cause of death, service factors and individual factors identified by committees as having contributed to death, and recommendations made by audit teams. Results 987 cases were audited, representing 93.1% of all maternal deaths reported through the national health management information system over the 5-year period. Almost 3 quarters of the deaths (71.6%) occurred at district hospitals. In 44.9% of these cases, death occurred in the post-partum period. Seventy per cent were due to direct causes, with post-partum haemorrhage as the leading cause (22.7%), followed by obstructed labour (12.3%). Indirect causes accounted for 25.7% of maternal deaths, with malaria as the leading cause (7.5%). Health system failures were identified as the main responsible factor for the majority of cases (61.0%); in 30.3% of the cases, the main factor was patient or community related. Conclusions The facility-based maternal death audit approach has helped hospital teams to identify direct and indirect causes of death, and their contributing factors, and to make recommendations for actions that would reduce the risk of reoccurrence. Rwanda can complement maternal death audits with other strategies, in particular confidential enquiries and near-miss audits, so as to inform corrective measures. PMID:26801466

The importance of being dead: cell death mechanisms assessment in anti-sarcoma therapy.

PubMed

Rello-Varona, Santiago; Herrero-Martín, David; Lagares-Tena, Laura; López-Alemany, Roser; Mulet-Margalef, Núria; Huertas-Martínez, Juan; Garcia-Monclús, Silvia; García Del Muro, Xavier; Muñoz-Pinedo, Cristina; Tirado, Oscar Martínez

2015-01-01

Cell death can occur through different mechanisms, defined by their nature and physiological implications. Correct assessment of cell death is crucial for cancer therapy success. Sarcomas are a large and diverse group of neoplasias from mesenchymal origin. Among cell death types, apoptosis is by far the most studied in sarcomas. Albeit very promising in other fields, regulated necrosis and other cell death circumstances (as so-called "autophagic cell death" or "mitotic catastrophe") have not been yet properly addressed in sarcomas. Cell death is usually quantified in sarcomas by unspecific assays and in most cases the precise sequence of events remains poorly characterized. In this review, our main objective is to put into context the most recent sarcoma cell death findings in the more general landscape of different cell death modalities.

Warm weather transport of broiler chickens in Manitoba. II. Truck management factors associated with death loss in transit to slaughter.

PubMed

Whiting, Terry L; Drain, Mairead E; Rasali, Drona P

2007-02-01

This observational study was conducted to identify the cause of death and load level factors associated with mortality in 1 090 733 Manitoba broiler chickens transported to slaughter in spring and early summer. Death loss in transit was 0.346% and accounted for 19% of the total carcass condemnation. The death loss pattern was clearly bimodal, with a low death loss in 180 of 198 shipments. Cumulative death loss during the growing phase of production was consistently associated with increased transport mortalities in load level models and when comparing high death loss with low death loss truckloads. High ambient temperature at the time of slaughter and loading density of the truck were the major factors associated with exceptional death loss.

Drug-poisoning Deaths Involving Opioid Analgesics: United States, 1999-2011.

PubMed

Chen, Li Hui; Hedegaard, Holly; Warner, Margaret

2014-09-01

Data from the National Vital Statistics System, Mortality File. The age-adjusted rate for opioid-analgesic poisoning deaths nearly quadrupled from 1.4 per 100,000 in 1999 to 5.4 per 100,000 in 2011. Although the opioid-analgesic poisoning death rates increased each year from 1999 through 2011, the rate of increase has slowed since 2006. Natural and semisynthetic opioid analgesics, such as hydrocodone, morphine, and oxycodone, were involved in 11,693 drug-poisoning deaths in 2011, up from 2,749 deaths in 1999. Benzodiazepines were involved in 31% of the opioid-analgesic poisoning deaths in 2011, up from 13% of the opioid-analgesic poisoning deaths in 1999. During the past decade, adults aged 55-64 and non-Hispanic white persons experienced the greatest increase in the rates of opioid-analgesic poisoning deaths. Poisoning is the leading cause of injury death in the United States (1). Drugs-both illicit and pharmaceutical-are the major cause of poisoning deaths, accounting for 90% of poisoning deaths in 2011. Misuse or abuse of prescription drugs, including opioid-analgesic pain relievers, is responsible for much of the recent increase in drug-poisoning deaths (2). This report highlights trends in drug-poisoning deaths involving opioid analgesics (referred to as opioid-analgesic poisoning deaths) and updates previous Data Briefs on this topic. All material appearing in this report is in the public domain and may be reproduced or copied without permission; citation as to source, however, is appreciated.

A preliminary investigation of asthma mortality in schools.

PubMed

Greiling, Andrea K; Boss, Leslie P; Wheeler, Lani S

2005-10-01

Although asthma deaths in children are rare, most asthma deaths should be preventable. No information has been identified in the professional literature addressing the occurrence of asthma deaths in schools. This investigation identified asthma deaths that occurred in US schools between 1990 and 2003 and the circumstances surrounding those deaths. Data were obtained through newspaper articles in the LexisNexis database and death certificates. Between 1990 and 2003, 38 asthma school deaths were reported. Eighteen (47%) identified deaths occurred among black children and 12 (31%) among white. Twenty-seven (72%) of the deaths occurred among teens. Of the fatal asthma attacks, 16 (42%) occurred while the children were participating in a physically active event. Twelve (31%) children died while waiting for medical assistance. Due to the nature of these data, inferences may be subject to source bias. For the identified asthma deaths, key findings include the following: (1) most deaths occurred in teens and high school students; (2) frequently, the precipitating event was related in time to exercise; and (3) a delayed response or hesitancy of school staff to provide medical assistance may have contributed to some of the deaths. Although few school-related asthma deaths are reported each year, the true number is unknown. Key factors in managing the disease and preventing asthma deaths and exacerbations in schools include identification of students with diagnosed asthma, communication with parents and health care providers, removal of triggers in the immediate school environment, and maximizing access to needed medications.

Risk factors for mortality in landslide- and flood-affected populations in Uganda.

PubMed

Agrawal, Shreya; Gorokhovich, Yuri; Doocy, Shannon

2013-01-01

Assess mortality risk factors including age, sex, and disaster type, in the March 2010 floods and landslides in Eastern Uganda and to compare time period, cause, location, and receipt of medical care among landslide and flood fatalities. A stratified cluster survey was conducted of 802 affected households in community and camp locations. Flood and landslide affected populations in the East Uganda the districts of Baduda and Butaleja. Adult household members in 802 households were surveyed regarding household member deaths in the floods and landslides areas. The primary outcome measure was the odds of death associated with age, sex, and disaster type (flood or landslide). The secondary outcome measure was the odds of event (landslide or flood) among fatalities associated with sex, age, time period of death, and cause of death. The odds of death were significantly higher in landslide affected populations than in flood affected populations (OR 3.06, 95% CI 2.20-4.25, p < 0.001). Time period of death (p = 0.016), type of death (p < 0.001), death after seeking medical care (p = 0.033), month of death (p < 0.001), and cause of death (p < 0.001) were significantly associated with increased odds of death due to landslides as compared to floods. More deaths occurred due to landslides than floods, and landslide deaths were more immediate, with a majority occurring on the day of the event. Females and younger age groups faced a greater risk of death from the landslide than the flood.

Socioeconomic Differences and Trends in the Place of Death among Elderly People in China

PubMed Central

Cai, Jiaoli; Zhao, Hongzhong; Coyte, Peter C.

2017-01-01

China is facing a dramatic aging of its population. Little is known about the factors that influence the place of death and the trends in the place of death for elderly people in China. The purposes of this study were: (1) to examine the impact of the socioeconomic status (SES) on place of death for elderly Chinese residents; and (2) to assess temporal trends in the place of death over the last 15 years. Data were derived from the Chinese Longitudinal Healthy Longevity Survey (CLHLS) (1998–2012). Place-of-death as an outcome was dichotomized into either death at home or death outside the home. Logistic regression analyses were used to examine the impact of SES on place of death. The results showed that, of the 23,098 deaths during the study period, 87.78% occurred at home. The overall trend in home death has increased since 2005. SES was shown to be an important factor affecting place of death. The elderly with higher SES were more likely to die where health resources were concentrated, i.e., in a hospital or other type of institution. Our finding suggests that the trend towards a greater emphasis on death at home may call for the development of more supportive home care programs in China. Our finding also suggests that the socioeconomic differences in the place of death may be related to the availability of or access to health care services. PMID:29019952

Causes of death in patients with chronic sarcoidosis.

PubMed

Hu, Xiaowen; Carmona, Eva M; Yi, Eunhee S; Pellikka, Patricia A; Ryu, Jay

2016-10-07

Sarcoidosis is a multi-system, granulomatous disorder of unknown etiology that is associated with a variable prognosis and sometimes results in death. There are conflicting reports regarding the causes of death in patients with sarcoidosis. Forty-four consecutive patients with sarcoidosis who underwent an autopsy (35 patients) or died at Mayo Clinic (Rochester, MN, USA) over a 20-yr period, from January 1, 1994 to December 31, 2013 were analyzed. The median age at death was 63 years (range, 33-94 years) and there were 22 (50%) women. Sarcoidosis had not been clinically diagnosed in 16 (36%) patients before death. Fifteen deaths (34%) were related to sarcoidosis and included seven deaths (16%) from cardiac sarcoidosis and four deaths (9%) from progressive pulmonary sarcoidosis. Other sarcoidosis-related causes of death included advanced hepatic sarcoidosis (5%) and opportunistic infections (5%) related to immunosuppressive therapy for treating sarcoidosis. Among seven patients dying from cardiac sarcoidosis, three had been diagnosed with sarcoidosis during life and cardiac involvement was known in two of them. Six of seven deaths from cardiac sarcoidosis occurred in the autopsied cohort while all four deaths from pulmonary sarcoidosis occurred in those not autopsied. In the majority of patients dying with sarcoidosis the cause of death is unrelated to sarcoidosis. Cardiac involvement is the most common cause of sarcoidosis-related deaths in patients subjected to postmortem examination and was usually undiagnosed during life. The cause distribution of death in patients with sarcoidosis differed depending on whether autopsy was performed.

A Review of Pregnancy-Related Maternal Mortality in Wisconsin, 2006-2010.

PubMed

Schellpfeffer, Michael A; Gillespie, Kate H; Rohan, Angela M; Blackwell, Sarah P

2015-10-01

Maternal mortality is a key indicator of maternal health and the general state of health care. This report summarizes maternal deaths in Wisconsin from January 2006 through December 2010. Maternal deaths were identified using death certificates and supporting links with infant birth and fetal death certificates. Suspected pregnancy-related maternal deaths were abstracted by a Wisconsin Maternal Mortality Review Team nurse abstractor. The entire team reviewed and analyzed these cases. If the death was deemed pregnancy related, a cause of death was determined, potential factors of avoidability were assessed, and recommendations for possible quality improvement were made. Fifty cases were reviewed and 21 cases were determined to be pregnancy related. The Wisconsin pregnancy-related maternal mortality ratio was 5.9 deaths per 100,000 live births (3.9-9.0, 95% CI), with markedly higher rates for non-Hispanic black women. The most common cause of death was cardiovascular related, with 5 of the 7 deaths being ascribed to peripartum cardiomyopathy. Chronic medical problems were associated with 55% of pregnancy-related maternal deaths excluding obesity. Nineteen percent of the pregnancy-related deaths reviewed were considered to be avoidable, and almost half (48%) had substantive recommendations made to improve maternal health. Even though the Wisconsin pregnancy-related maternal mortality ratio is well below the national average, there remain stark racial disparities in maternal deaths and a number of avoidable pregnancy-related deaths that should be targeted for prevention.

Use of a radial self-field diode geometry for intense pulsed ion beam generation at 6 MeV on Hermes III

DOE PAGES

Renk, Timothy Jerome; Harper-Slaboszewicz, Victor Jozef; Mikkelson, Kenneth A.; ...

2014-12-15

We investigate the generation of intense pulsed focused ion beams at the 6 MeV level using an inductive voltage adder (IVA) pulsed-power generator, which employs a magnetically insulated transmission line (MITL). Such IVA machines typical run at an impedance of few tens of Ohms. Previous successful intense ion beam generation experiments have often featured an “axial” pinch-reflex ion diode (i.e., with an axial anode-cathode gap) and operated on a conventional Marx generator/water line driver with an impedance of a few Ohms and no need for an MITL. The goals of these experiments are to develop a pinch-reflex ion diode geometrymore » that has an impedance to efficiently match to an IVA, produces a reasonably high ion current fraction, captures the vacuum electron current flowing forward in the MITL, and focuses the resulting ion beam to small spot size. Furthermore, a new “radial” pinch-reflex ion diode (i.e., with a radial anode-cathode gap) is found to best demonstrate these properties. Operation in both positive and negative polarities was undertaken, although the negative polarity experiments are emphasized. Particle-in-cell (PIC) simulations are consistent with experimental results indicating that, for diode impedances less than the self-limited impedance of the MITL, almost all of the forward-going IVA vacuum electron flow current is incorporated into the diode current. PIC results also provide understanding of the diode-impedance and ion-focusing properties of the diode. Additionally, a substantial high-energy ion population is also identified propagating in the “reverse” direction, i.e., from the back side of the anode foil in the electron beam dump.« less

Estimating the circuit delay of FPGA with a transfer learning method

NASA Astrophysics Data System (ADS)

Cui, Xiuhai; Liu, Datong; Peng, Yu; Peng, Xiyuan

2017-10-01

With the increase of FPGA (Field Programmable Gate Array, FPGA) functionality, FPGA has become an on-chip system platform. Due to increase the complexity of FPGA, estimating the delay of FPGA is a very challenge work. To solve the problems, we propose a transfer learning estimation delay (TLED) method to simplify the delay estimation of different speed grade FPGA. In fact, the same style different speed grade FPGA comes from the same process and layout. The delay has some correlation among different speed grade FPGA. Therefore, one kind of speed grade FPGA is chosen as a basic training sample in this paper. Other training samples of different speed grade can get from the basic training samples through of transfer learning. At the same time, we also select a few target FPGA samples as training samples. A general predictive model is trained by these samples. Thus one kind of estimation model is used to estimate different speed grade FPGA circuit delay. The framework of TRED includes three phases: 1) Building a basic circuit delay library which includes multipliers, adders, shifters, and so on. These circuits are used to train and build the predictive model. 2) By contrasting experiments among different algorithms, the forest random algorithm is selected to train predictive model. 3) The target circuit delay is predicted by the predictive model. The Artix-7, Kintex-7, and Virtex-7 are selected to do experiments. Each of them includes -1, -2, -2l, and -3 different speed grade. The experiments show the delay estimation accuracy score is more than 92% with the TLED method. This result shows that the TLED method is a feasible delay assessment method, especially in the high-level synthesis stage of FPGA tool, which is an efficient and effective delay assessment method.

Optimization of current waveform tailoring for magnetically driven isentropic compression experiments

NASA Astrophysics Data System (ADS)

Waisman, E. M.; Reisman, D. B.; Stoltzfus, B. S.; Stygar, W. A.; Cuneo, M. E.; Haill, T. A.; Davis, J.-P.; Brown, J. L.; Seagle, C. T.; Spielman, R. B.

2016-06-01

The Thor pulsed power generator is being developed at Sandia National Laboratories. The design consists of up to 288 decoupled and transit time isolated capacitor-switch units, called "bricks," that can be individually triggered to achieve a high degree of pulse tailoring for magnetically driven isentropic compression experiments (ICE) [D. B. Reisman et al., Phys. Rev. Spec. Top.-Accel. Beams 18, 090401 (2015)]. The connecting transmission lines are impedance matched to the bricks, allowing the capacitor energy to be efficiently delivered to an ICE strip-line load with peak pressures of over 100 GPa. Thor will drive experiments to explore equation of state, material strength, and phase transition properties of a wide variety of materials. We present an optimization process for producing tailored current pulses, a requirement for many material studies, on the Thor generator. This technique, which is unique to the novel "current-adder" architecture used by Thor, entirely avoids the iterative use of complex circuit models to converge to the desired electrical pulse. We begin with magnetohydrodynamic simulations for a given material to determine its time dependent pressure and thus the desired strip-line load current and voltage. Because the bricks are connected to a central power flow section through transit-time isolated coaxial cables of constant impedance, the brick forward-going pulses are independent of each other. We observe that the desired equivalent forward-going current driving the pulse must be equal to the sum of the individual brick forward-going currents. We find a set of optimal brick delay times by requiring that the L2 norm of the difference between the brick-sum current and the desired forward-going current be a minimum. We describe the optimization procedure for the Thor design and show results for various materials of interest.

Comparison between Frame-Constrained Fix-Pixel-Value and Frame-Free Spiking-Dynamic-Pixel ConvNets for Visual Processing

PubMed Central

Farabet, Clément; Paz, Rafael; Pérez-Carrasco, Jose; Zamarreño-Ramos, Carlos; Linares-Barranco, Alejandro; LeCun, Yann; Culurciello, Eugenio; Serrano-Gotarredona, Teresa; Linares-Barranco, Bernabe

2012-01-01

Most scene segmentation and categorization architectures for the extraction of features in images and patches make exhaustive use of 2D convolution operations for template matching, template search, and denoising. Convolutional Neural Networks (ConvNets) are one example of such architectures that can implement general-purpose bio-inspired vision systems. In standard digital computers 2D convolutions are usually expensive in terms of resource consumption and impose severe limitations for efficient real-time applications. Nevertheless, neuro-cortex inspired solutions, like dedicated Frame-Based or Frame-Free Spiking ConvNet Convolution Processors, are advancing real-time visual processing. These two approaches share the neural inspiration, but each of them solves the problem in different ways. Frame-Based ConvNets process frame by frame video information in a very robust and fast way that requires to use and share the available hardware resources (such as: multipliers, adders). Hardware resources are fixed- and time-multiplexed by fetching data in and out. Thus memory bandwidth and size is important for good performance. On the other hand, spike-based convolution processors are a frame-free alternative that is able to perform convolution of a spike-based source of visual information with very low latency, which makes ideal for very high-speed applications. However, hardware resources need to be available all the time and cannot be time-multiplexed. Thus, hardware should be modular, reconfigurable, and expansible. Hardware implementations in both VLSI custom integrated circuits (digital and analog) and FPGA have been already used to demonstrate the performance of these systems. In this paper we present a comparison study of these two neuro-inspired solutions. A brief description of both systems is presented and also discussions about their differences, pros and cons. PMID:22518097

Optimization of current waveform tailoring for magnetically driven isentropic compression experiments.

PubMed

Waisman, E M; Reisman, D B; Stoltzfus, B S; Stygar, W A; Cuneo, M E; Haill, T A; Davis, J-P; Brown, J L; Seagle, C T; Spielman, R B

2016-06-01

The Thor pulsed power generator is being developed at Sandia National Laboratories. The design consists of up to 288 decoupled and transit time isolated capacitor-switch units, called "bricks," that can be individually triggered to achieve a high degree of pulse tailoring for magnetically driven isentropic compression experiments (ICE) [D. B. Reisman et al., Phys. Rev. Spec. Top.-Accel. Beams 18, 090401 (2015)]. The connecting transmission lines are impedance matched to the bricks, allowing the capacitor energy to be efficiently delivered to an ICE strip-line load with peak pressures of over 100 GPa. Thor will drive experiments to explore equation of state, material strength, and phase transition properties of a wide variety of materials. We present an optimization process for producing tailored current pulses, a requirement for many material studies, on the Thor generator. This technique, which is unique to the novel "current-adder" architecture used by Thor, entirely avoids the iterative use of complex circuit models to converge to the desired electrical pulse. We begin with magnetohydrodynamic simulations for a given material to determine its time dependent pressure and thus the desired strip-line load current and voltage. Because the bricks are connected to a central power flow section through transit-time isolated coaxial cables of constant impedance, the brick forward-going pulses are independent of each other. We observe that the desired equivalent forward-going current driving the pulse must be equal to the sum of the individual brick forward-going currents. We find a set of optimal brick delay times by requiring that the L2 norm of the difference between the brick-sum current and the desired forward-going current be a minimum. We describe the optimization procedure for the Thor design and show results for various materials of interest.

Method and apparatus for enhancing microchannel plate data

DOEpatents

Thoe, Robert S.

1987-01-01

A method and apparatus for determining centroid channel locations is disclosed for use in a system activated by one or more multichannel plates (16,18) and including a linear diode array (24) providing channels of information 1, 2, . . . , n, . . . , N containing signal amplitudes A.sub.n. A source of analog A.sub.n signals (40), and a source of digital clock signals n (48), are provided. Non-zero A.sub.n values are detected in a discriminator (42). A digital signal representing p, the value of n immediately preceding that whereat A.sub.n takes its first non-zero value, is generated in a scaler (50). The analog A.sub.n signals are converted to digital in an analog to digital converter (44). The digital A.sub.n signals are added to produce a digital .SIGMA.A.sub.n signal in a full adder (46). Digital 1, 2, . . . , m signals representing the number of non-zero A.sub.n are produced by a discriminator pulse counter (52). Digital signals representing 1 A.sub.p+ 1, 2 A.sub.p+2, . . . , m A.sub.p+m are produced by pairwise multiplication in multiplier (54). These signals are added in multiplier summer (56) to produce a digital .SIGMA.nA.sub.n -p.SIGMA.A.sub.n signal. This signal is divided by the digital .SIGMA.A.sub.n signal in divider (58) to provide a digital (.SIGMA.nA.sub.n /.SIGMA.A.sub.n) -p signal. Finally, this last signal is added to the digital p signal in an offset summer (60) to provide .SIGMA.nA.sub.n /.SIGMA.A.sub.n, the centroid channel locations.

Use of a radial self-field diode geometry for intense pulsed ion beam generation at 6 MeV on Hermes III

DOE Office of Scientific and Technical Information (OSTI.GOV)

Renk, T. J., E-mail: tjrenk@sandia.gov; Harper-Slaboszewicz, V.; Mikkelson, K. A.

2014-12-15

We investigate the generation of intense pulsed focused ion beams at the 6 MeV level using an inductive voltage adder (IVA) pulsed-power generator, which employs a magnetically insulated transmission line (MITL). Such IVA machines typical run at an impedance of few tens of Ohms. Previous successful intense ion beam generation experiments have often featured an “axial” pinch-reflex ion diode (i.e., with an axial anode-cathode gap) and operated on a conventional Marx generator/water line driver with an impedance of a few Ohms and no need for an MITL. The goals of these experiments are to develop a pinch-reflex ion diode geometry thatmore » has an impedance to efficiently match to an IVA, produces a reasonably high ion current fraction, captures the vacuum electron current flowing forward in the MITL, and focuses the resulting ion beam to small spot size. A new “radial” pinch-reflex ion diode (i.e., with a radial anode-cathode gap) is found to best demonstrate these properties. Operation in both positive and negative polarities was undertaken, although the negative polarity experiments are emphasized. Particle-in-cell (PIC) simulations are consistent with experimental results indicating that, for diode impedances less than the self-limited impedance of the MITL, almost all of the forward-going IVA vacuum electron flow current is incorporated into the diode current. PIC results also provide understanding of the diode-impedance and ion-focusing properties of the diode. In addition, a substantial high-energy ion population is also identified propagating in the “reverse” direction, i.e., from the back side of the anode foil in the electron beam dump.« less

Hybridizing triboelectrification and electromagnetic induction effects for high-efficient mechanical energy harvesting.

PubMed

Hu, Youfan; Yang, Jin; Niu, Simiao; Wu, Wenzhuo; Wang, Zhong Lin

2014-07-22

The recently introduced triboelectric nanogenerator (TENG) and the traditional electromagnetic induction generator (EMIG) are coherently integrated in one structure for energy harvesting and vibration sensing/isolation. The suspended structure is based on two oppositely oriented magnets that are enclosed by hollow cubes surrounded with coils, which oscillates in response to external disturbance and harvests mechanical energy simultaneously from triboelectrification and electromagnetic induction. It extends the previous definition of hybrid cell to harvest the same type of energy with multiple approaches. Both the sliding-mode TENG and contact-mode TENG can be achieved in the same structure. In order to make the TENG and EMIG work together, transformers are used to match the output impedance between these two power sources with very different characteristics. The maximum output power of 7.7 and 1.9 mW on the same load of 5 kΩ was obtained for the TENG and EMIG, respectively, after impedance matching. Benefiting from the rational design, the output signal from the TENG and the EMIG are in phase. They can be added up directly to get an output voltage of 4.6 V and an output current of 2.2 mA in parallel connection. A power management circuit was connected to the hybrid cell, and a regulated voltage of 3.3 V with constant current was achieved. For the first time, a logic operation was carried out on a half-adder circuit by using the hybrid cell working as both the power source and the input digit signals. We also demonstrated that the hybrid cell can serve as a vibration isolator. Further applications as vibration dampers, triggers, and sensors are all promising.

Comparison between Frame-Constrained Fix-Pixel-Value and Frame-Free Spiking-Dynamic-Pixel ConvNets for Visual Processing.

PubMed

Farabet, Clément; Paz, Rafael; Pérez-Carrasco, Jose; Zamarreño-Ramos, Carlos; Linares-Barranco, Alejandro; Lecun, Yann; Culurciello, Eugenio; Serrano-Gotarredona, Teresa; Linares-Barranco, Bernabe

2012-01-01

Most scene segmentation and categorization architectures for the extraction of features in images and patches make exhaustive use of 2D convolution operations for template matching, template search, and denoising. Convolutional Neural Networks (ConvNets) are one example of such architectures that can implement general-purpose bio-inspired vision systems. In standard digital computers 2D convolutions are usually expensive in terms of resource consumption and impose severe limitations for efficient real-time applications. Nevertheless, neuro-cortex inspired solutions, like dedicated Frame-Based or Frame-Free Spiking ConvNet Convolution Processors, are advancing real-time visual processing. These two approaches share the neural inspiration, but each of them solves the problem in different ways. Frame-Based ConvNets process frame by frame video information in a very robust and fast way that requires to use and share the available hardware resources (such as: multipliers, adders). Hardware resources are fixed- and time-multiplexed by fetching data in and out. Thus memory bandwidth and size is important for good performance. On the other hand, spike-based convolution processors are a frame-free alternative that is able to perform convolution of a spike-based source of visual information with very low latency, which makes ideal for very high-speed applications. However, hardware resources need to be available all the time and cannot be time-multiplexed. Thus, hardware should be modular, reconfigurable, and expansible. Hardware implementations in both VLSI custom integrated circuits (digital and analog) and FPGA have been already used to demonstrate the performance of these systems. In this paper we present a comparison study of these two neuro-inspired solutions. A brief description of both systems is presented and also discussions about their differences, pros and cons.

Framework for Integrating Science Data Processing Algorithms Into Process Control Systems

NASA Technical Reports Server (NTRS)

Mattmann, Chris A.; Crichton, Daniel J.; Chang, Albert Y.; Foster, Brian M.; Freeborn, Dana J.; Woollard, David M.; Ramirez, Paul M.

2011-01-01

A software framework called PCS Task Wrapper is responsible for standardizing the setup, process initiation, execution, and file management tasks surrounding the execution of science data algorithms, which are referred to by NASA as Product Generation Executives (PGEs). PGEs codify a scientific algorithm, some step in the overall scientific process involved in a mission science workflow. The PCS Task Wrapper provides a stable operating environment to the underlying PGE during its execution lifecycle. If the PGE requires a file, or metadata regarding the file, the PCS Task Wrapper is responsible for delivering that information to the PGE in a manner that meets its requirements. If the PGE requires knowledge of upstream or downstream PGEs in a sequence of executions, that information is also made available. Finally, if information regarding disk space, or node information such as CPU availability, etc., is required, the PCS Task Wrapper provides this information to the underlying PGE. After this information is collected, the PGE is executed, and its output Product file and Metadata generation is managed via the PCS Task Wrapper framework. The innovation is responsible for marshalling output Products and Metadata back to a PCS File Management component for use in downstream data processing and pedigree. In support of this, the PCS Task Wrapper leverages the PCS Crawler Framework to ingest (during pipeline processing) the output Product files and Metadata produced by the PGE. The architectural components of the PCS Task Wrapper framework include PGE Task Instance, PGE Config File Builder, Config File Property Adder, Science PGE Config File Writer, and PCS Met file Writer. This innovative framework is really the unifying bridge between the execution of a step in the overall processing pipeline, and the available PCS component services as well as the information that they collectively manage.

High Intensity e-beam Diode Development for Flash X-ray Radiography

NASA Astrophysics Data System (ADS)

Oliver, Bryan

2007-11-01

A variety of electron beam diodes are being used and developed for the purpose of creating high-brightness, flash x-ray radiography sources. In these diodes, high energy (multi MeV), high current (multi kA), small spot (multi mm) electron beams are generated and stopped in high atomic number anode-targets (typically Ta or W). Beam stopping in the target creates copious amounts of bremsstrahlung radiation. In addition, beam heating of the target liberates material, either in the form of low density (˜10^12-10^14 cm-3) ion emission or higher density (> 10^15 cm-3) plasma. In all cases, beam/target collective effects dominate the diode and beam characteristics, affecting the radiation properties (dose and spot-size). Recent experiments at Sandia National Laboratories have demonstrated diodes capable of producing > 350 rad@m with 1.7mm FWHM x-ray source distributions. A review of our present theoretical understanding of the diode (s) operation and our experimental and simulation methods to investigate them will be presented. Emphasis will be given to e- beam sources used on state-of-the-art Inductive Voltage Adder (IVA) pulsed-power accelerators. In particular, the physics of magnetically pinched diodes (e.g. the rod-pinch [1,2]), gas-cell focusing diodes [3] and the magnetically immersed [4] diode will be discussed. Various proposed methods to optimize the x-ray intensity and the direction of future diode research will be discussed. [1] G. Cooperstein, et al., Phys. Plasmas 8, 4618 (2001).[2] B.V. Oliver et al., Phys. Plasmas 11, 3976 (2004)[3] B.V. Oliver, et al., IEEE Trans. on Plasma Science 33, 704 (2005).[4] M.G. Mazarakis, et al., Appl. Phys. Lett. 70, 832 (1997)

NASA Tech Briefs, January 2003

NASA Technical Reports Server (NTRS)

2003-01-01

Topics covered include: Optoelectronic Tool Adds Scale Marks to Photographic Images; Compact Interconnection Networks Based on Quantum Dots; Laterally Coupled Quantum-Dot Distributed-Feedback Lasers; Bit-Serial Adder Based on Quantum Dots; Stabilized Fiber-Optic Distribution of Reference Frequency; Delay/Doppler-Mapping GPS-Reflection Remote-Sensing System; Ladar System Identifies Obstacles Partly Hidden by Grass; Survivable Failure Data Recorders for Spacecraft; Fiber-Optic Ammonia Sensors; Silicon Membrane Mirrors with Electrostatic Shape Actuators; Nanoscale Hot-Wire Probes for Boundary-Layer Flows; Theodolite with CCD Camera for Safe Measurement of Laser-Beam Pointing; Efficient Coupling of Lasers to Telescopes with Obscuration; Aligning Three Off-Axis Mirrors with Help of a DOE; Calibrating Laser Gas Measurements by Use of Natural CO2; Laser Ranging Simulation Program; Micro-Ball-Lens Optical Switch Driven by SMA Actuator; Evaluation of Charge Storage and Decay in Spacecraft Insulators; Alkaline Capacitors Based on Nitride Nanoparticles; Low-EC-Content Electrolytes for Low-Temperature Li-Ion Cells; Software for a GPS-Reflection Remote-Sensing System; Software for Building Models of 3D Objects via the Internet; "Virtual Cockpit Window" for a Windowless Aerospacecraft; CLARAty Functional-Layer Software; Java Library for Input and Output of Image Data and Metadata; Software for Estimating Costs of Testing Rocket Engines; Energy-Absorbing, Lightweight Wheels; Viscoelastic Vibration Dampers for Turbomachine Blades; Soft Landing of Spacecraft on Energy-Absorbing Self-Deployable Cushions; Pneumatically Actuated Miniature Peristaltic Vacuum Pumps; Miniature Gas-Turbine Power Generator; Pressure-Sensor Assembly Technique; Wafer-Level Membrane-Transfer Process for Fabricating MEMS; A Reactive-Ion Etch for Patterning Piezoelectric Thin Film; Wavelet-Based Real-Time Diagnosis of Complex Systems; Quantum Search in Hilbert Space; Analytic Method for Computing Instrument Pointing Jitter; and Semiselective Optoelectronic Sensors for Monitoring Microbes.

Programmable nanowire circuits for nanoprocessors.

PubMed

Yan, Hao; Choe, Hwan Sung; Nam, SungWoo; Hu, Yongjie; Das, Shamik; Klemic, James F; Ellenbogen, James C; Lieber, Charles M

2011-02-10

A nanoprocessor constructed from intrinsically nanometre-scale building blocks is an essential component for controlling memory, nanosensors and other functions proposed for nanosystems assembled from the bottom up. Important steps towards this goal over the past fifteen years include the realization of simple logic gates with individually assembled semiconductor nanowires and carbon nanotubes, but with only 16 devices or fewer and a single function for each circuit. Recently, logic circuits also have been demonstrated that use two or three elements of a one-dimensional memristor array, although such passive devices without gain are difficult to cascade. These circuits fall short of the requirements for a scalable, multifunctional nanoprocessor owing to challenges in materials, assembly and architecture on the nanoscale. Here we describe the design, fabrication and use of programmable and scalable logic tiles for nanoprocessors that surmount these hurdles. The tiles were built from programmable, non-volatile nanowire transistor arrays. Ge/Si core/shell nanowires coupled to designed dielectric shells yielded single-nanowire, non-volatile field-effect transistors (FETs) with uniform, programmable threshold voltages and the capability to drive cascaded elements. We developed an architecture to integrate the programmable nanowire FETs and define a logic tile consisting of two interconnected arrays with 496 functional configurable FET nodes in an area of ∼960 μm(2). The logic tile was programmed and operated first as a full adder with a maximal voltage gain of ten and input-output voltage matching. Then we showed that the same logic tile can be reprogrammed and used to demonstrate full-subtractor, multiplexer, demultiplexer and clocked D-latch functions. These results represent a significant advance in the complexity and functionality of nanoelectronic circuits built from the bottom up with a tiled architecture that could be cascaded to realize fully integrated nanoprocessors with computing, memory and addressing capabilities.