45 CFR 1355.35 - Program improvement plans.
Code of Federal Regulations, 2010 CFR
2010-10-01
... jointly by State and Federal staff in consultation with the review team; (ii) Identify the areas in which... be used to evaluate progress; (vi) Identify how the action steps in the plan build on and make... evaluated jointly by the State agency and ACF, in collaboration with other members of the review team, as...
Joint ventures: to pursue or not to pursue?
Blaszyk, Michael D; Hill-Mischel, Jody
2007-11-01
Hospitals should carefully select joint venture partners. The joint venture evaluation process should involve a high-level screen of strategic opportunities. Hospitals should develop a full business plan for the joint venture.
45 CFR 1355.35 - Program improvement plans.
Code of Federal Regulations, 2013 CFR
2013-10-01
... developed jointly by title IV-E agency and Federal staff in consultation with the review team; (ii) Identify... how the action steps in the plan build on and make progress over prior program improvement plans; (vii... evaluated jointly by the title IV-E agency and ACF, in collaboration with other members of the review team...
32 CFR 700.405 - Delegated authority and responsibility.
Code of Federal Regulations, 2011 CFR
2011-07-01
... motivation of Navy personnel and the prestige of a Navy career; (4) To plan and provide health care for..., test, and evaluation to plan and provide for the conduct of test and evaluation which are adequate and... strategic plans and policies and participate in the formulation of Joint and combined strategic plans and...
2012-12-01
Makeup for the CASO (After Deputy Assistant Secretary of Defense for Manufacturing and Industrial Base, n.d., p. 7) .......73 xiv Figure 26. JCASO...Augmentation Program CAP Crisis Action Planning CASO Contingency Acquisition Support Office CBP Capability-Based Planning CCAS Contingency...enhance joint doctrine; 69 Develop and refine joint non-acquisition OCS training and education and ensure its inclusion in joint exercises; Identify
ERIC Educational Resources Information Center
Diamond, Esther E.
The growing demand for program evaluation in the 1970s gave rise to a need for a comprehensive, carefully developed, objective set of guiding principles for the evaluation process, from initial planning to final report. The Joint Committee on Standards for Education Evaluation was established to meet this need. This broad-based group, representing…
2005 Precision Strike Winter Roundtable
2005-01-26
Lamartin Director Enterprise Development Developmental Test & Evaluation Assessments & Support System Engineering Mr. Schaeffer Director 6 6 Systems and...Joint Concept Development , by Colonel Ed Yarnell, USMC USJFCOM’s Experimentation Strategy, by Captain E. Mark Chicoine, USN Systems and Mission...Strategy Division Chief, J-5 Strategic Plans and Policy Directorate, The Joint Staff 1030 JOINT CONCEPT DEVELOPMENT : Ed Yarnell, USMC Chief, Concepts
2010-12-01
59 a. The Joint Uniform Lessons Learned System (JULLS) .........59 b. Acquisition Community Connection (ACC) ..........................59 c...Report ACC Acquisition Community Connection ADDIE Analyze, Design, Develop, Implement, Evaluate AFFARS Air Force Federal Acquisition Regulation...Operations J4 Logistics J5 Plans J6 Communications J8 Programming and Comptroller J&A Justification and Approval JARB Joint Acquisition
Minehart, Rebecca D; Pian-Smith, May C M; Walzer, Toni B; Gardner, Roxane; Rudolph, Jenny W; Simon, Robert; Raemer, Daniel B
2012-06-01
Organizational behavior and management fields have long realized the importance of teamwork and team-building skills, but only recently has health care training focused on these critical elements. Communication styles and strategies are a common focus of team training but have not yet been consistently applied to medicine. We sought to determine whether such communication strategies, specifically "advocacy" and "inquiry," were used de novo by medical professionals in a simulation-based teamwork and crisis resource management course. Explicit expression of a jointly managed clinical plan between providers, a strategy shown to improve patient safety, was also evaluated. Forty-four of 54 videotaped performances of an ongoing team-building skills course were viewed and analyzed for presence of advocacy and/or inquiry that related to information or a plan; inclusion criteria were participation of a nonconfederate obstetrician and an anesthesiologist. Verbal statement of a jointly managed clinical plan was also recorded. Anesthesiologists advocated information in 100% of cases and advocated their plans in 93% of cases but inquired information in 30% of cases and inquired about the obstetricians' plans in 11% of cases. Obstetricians advocated information in 73% of cases, advocated their plans in 73% of cases, inquired information in 75% of cases, and inquired about the anesthesiologists' plans in 59% of cases. An explicitly stated joint team plan was formed in 45% of cases. Anesthesiologists advocated more frequently than obstetricians, while obstetricians inquired and advocated in more balanced proportions. However, fewer than half of the teams explicitly agreed on a joint plan. Increasing awareness of communication styles, and possibly incorporating these skills into medical training, may help teams arrive more efficiently at jointly managed clinical plans in crisis situations.
2007-01-01
results could be compromised. While service development efforts tied to seabasing are approaching milestones for investment decisions , it is...estimates for joint seabasing options are developed and made transparent to DOD and Congress, decision makers will not be able to evaluate the cost...Integrate Service Initiatives 10 DOD Has Not Developed a Joint Experimentation Campaign Plan to Inform Decisions About Joint Seabasing 16 Timeframe for
School District-University Cooperation in Competency-Based Inservice Teacher Education.
ERIC Educational Resources Information Center
Grunewald, Robert N.
This article describes a jointly planned and jointly evaluated course offered through Washington State University General Extension. The purpose of the course was to improve instruction in elementary classrooms through use of competency-based training materials (Minicourses) from the Far West Laboratory for Educational Research and Development.…
Joint Enabling Capabilities Command
Executive Director Chief of Staff Joint Planning Support Element Joint Communications Support Element mission Joint Enabling Capabilities Command provides decisive joint communications, planning and public and responsive support for joint communications, planning and public affairs. Priorities * Deliver
NASA Technical Reports Server (NTRS)
Zanoni, Vicki; Ryan, Robert; Pagnutti, Mary; Baldridge, Braxton; Roylance, Spencer; Snyder, Greg; Lee, George; Stanley, Tom
2002-01-01
An overview of the Joint Agency Commercial Imagery Evalation (JACIE) team is presented. JACIE, composed of the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA), and the U.S. Geological Survey (USGS), was formed to leverage government agencies' capabilities for the characterization of commercial remote sensing data. Each JACIE agency purchases, or plans to purchase, commercial imagery to support its research and applications. It is critical that the data be assessed for its accuracy and utility. Through JACIE, NASA, NIMA, and USGS jointly characterized image products from Space Imaging's IKONOS satellite. Each JACIE agency performed an aspect of the characterization based on its expertise. NASA and its university partners performed a system characterization focusing on radiometric calibration, geopositional accuracy, and spatial resolution assessment; NIMA performed image interpretability and feature extraction evaluations; and USGS assessed geopositional accuracy of several IKONOS products. The JACIE team purchased IKONOS imagery of several study sites to perform the assessments and presented results at an industry-government workshop. Future plans for JACIE include the characterization of DigitalGlobe's QuickBird-2 image products.
40 CFR 35.515 - Evaluation of performance.
Code of Federal Regulations, 2010 CFR
2010-07-01
....515 Evaluation of performance. (a) Joint evaluation process. The applicant and the Regional... work plan (see section 35.507(b)(2)(iv)). A description of the evaluation process and reporting... annually and must satisfy the requirements for progress reporting under 40 CFR 31.40(b). (b) Elements of...
24 CFR 943.128 - How does a consortium carry out planning and reporting functions?
Code of Federal Regulations, 2010 CFR
2010-04-01
... HOUSING, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT PUBLIC HOUSING AGENCY CONSORTIA AND JOINT VENTURES... the consortium agreement, the consortium must submit joint five-year Plans and joint Annual Plans for... the joint PHA Plan. ...
DOT National Transportation Integrated Search
2008-05-01
This document describes the hydrogen transit bus evaluations performed by the National Renewable Energy Laboratory (NREL) and funded by the U.S. Department of Energy (DOE) and the U.S. Department of Transportations Federal Transit Administration (...
An Optimized Trajectory Planning for Welding Robot
NASA Astrophysics Data System (ADS)
Chen, Zhilong; Wang, Jun; Li, Shuting; Ren, Jun; Wang, Quan; Cheng, Qunchao; Li, Wentao
2018-03-01
In order to improve the welding efficiency and quality, this paper studies the combined planning between welding parameters and space trajectory for welding robot and proposes a trajectory planning method with high real-time performance, strong controllability and small welding error. By adding the virtual joint at the end-effector, the appropriate virtual joint model is established and the welding process parameters are represented by the virtual joint variables. The trajectory planning is carried out in the robot joint space, which makes the control of the welding process parameters more intuitive and convenient. By using the virtual joint model combined with the B-spline curve affine invariant, the welding process parameters are indirectly controlled by controlling the motion curve of the real joint. To solve the optimal time solution as the goal, the welding process parameters and joint space trajectory joint planning are optimized.
EPA's Office of Research and Development and Office of Water/Water Security Division have jointly developed a Response Protocol Toolbox (RPTB) to address the complex, multi-faceted challenges of a water utility's planning and response to intentional contamination of drinking wate...
Gulf Coast Joint Venture - Home
Research Resources Data Documents Links Mottled Duck Info Habitat Projects Habitat Funding Contact Us Home - About Us - Planning and Evaluation - Resources - Habitat Projects - Habitat Funding - Contact Us Gulf
Laboratory evaluation and interpretation of synovial fluid.
MacWilliams, Peter S; Friedrichs, Kristen R
2003-01-01
Canine and feline joint disease can be a primary disorder limited to joints or a manifestation of multisystemic disease. Collection and analysis of joint fluid provides valuable information for the diagnosis, prognosis, and treatment of diseases that affect the joint space. The cytologic recognition of the cellular components and infectious agents in synovial fluid categorizes the cell response and differentiates inflammatory and noninflammatory joint disorders. This information is supported by the cell counts, protein content, mucin clot test, bacterial culture, and serologic tests for infectious or immune-mediated disease. These results are integrated with the clinical history, physical examination, radiographic findings, and ancillary test results to arrive at a diagnosis and treatment plan.
Automated planning of computer assisted mosaic arthroplasty.
Inoue, Jiro; Kunz, Manuela; Hurtig, Mark B; Waldman, Stephen D; Stewart, A James
2011-01-01
We describe and evaluate a computer algorithm that automatically develops a surgical plan for computer assisted mosaic arthroplasty, a technically demanding procedure in which a set of osteochondral plugs are transplanted from a non-load-bearing area of the joint to the site of a cartilage defect. We found that the algorithm produced plans that were at least as good as a human expert, had less variability, and took less time.
Joint Chiefs of Staff > Directorates > J5 | Strategic Plans and Policy
Quadrilateral Logistics Forum J5 | Strategic Plans and Policy J6 | C4 & Cyber J7 | Joint Force Development J8 | Force Structure, Resources & Assessment Contact J5 Strategic Plans and Policy Home : Directorates : J5 | Strategic Plans and Policy Mission The Joint Staff J5 proposes strategies, plans, and
Schick, Fabian; Asseln, Malte; Damm, Philipp; Radermacher, Klaus
2018-01-01
Validation of musculoskeletal models for application in preoperative planning is still a challenging task. Ideally, the simulation results of a patient-specific musculoskeletal model are compared to corresponding in vivo measurements. Currently, the only possibility to measure in vivo joint forces is to implant an instrumented prosthesis in patients undergoing a total joint replacement. In this study, a musculoskeletal model of the AnyBody Modeling System was adapted patient-specifically and validated against the in vivo hip joint force measurements of ten subjects performing one-leg stance and level walking. The impact of four model parameters was evaluated; hip joint width, muscle strength, muscle recruitment, and type of muscle model. The smallest difference between simulated and in vivo hip joint force was achieved by using the hip joint width measured in computed tomography images, a muscle strength of 90 N/cm2, a third order polynomial muscle recruitment, and a simple muscle model. This parameter combination reached mean deviations between simulation and in vivo measurement during the peak force phase of 12% ± 14% in magnitude and 11° ± 5° in orientation for one-leg stance and 8% ± 6% in magnitude and 10° ± 5° in orientation for level walking. PMID:29649235
2007 Precision Strike PEO Summer Forum - Joint Perspectives on Precision Engagement
2007-07-11
Status,” Colonel Richard Justice, USAF—Commander of the Miniature Munitions Systems Group (MMSG), Eglin Air Force Base “Unmanned Systems (UAS) Roadmap...Role in the Roadmap Implementation Methods & Processes Working Group Issues delineated in Implementation Plan form basis for JTEM methodology...Test and Evaluation JMETC – Joint Mission Environment Test Capability WG – Working Group DOT&E AT&L DOT&E Unclassified 5 Background: JTEM Problem
DOT National Transportation Integrated Search
2007-11-13
This document presents the findings from the baseline phase of the evaluation of the process being used by eight sites to develop a design for a Travel Management Coordination Center (TMCC) for improved coordination of human service transportation wi...
The Origin and Development of the African Evaluation Guidelines
ERIC Educational Resources Information Center
Rouge, Jean-Charles
2004-01-01
In May 1990, the first evaluation seminar in Africa took place in Cote d'Ivoire. It was the first in a series of regional seminars on evaluation planned by the Development Assistance Committee (DAC) of the Organization for Economic Cooperation and Development (OECD). The seminar was jointly presented by the DAC and African Development Bank (ADB).…
Martin, Heather A; Ciurzynski, Susan M
2015-11-01
Thousands of people die annually in hospitals because of poor communication and teamwork between health care team members. Standardized tools and strategies help increase the amount and quality of communication. Two structured communication methods include implementing huddles and the use of the situation, background, assessment, and recommendation (SBAR) communication framework. To improve communication among nurse practitioners and registered nurses within a pediatric emergency department, a performance-improvement project with the structured processes of a joint patient evaluation and huddle was implemented. Data were gathered from 32 nurses and 2 nurse practitioners using structured observation and pre- and post-implementation surveys. The following outcomes were measured: presence or absence of joint patient evaluation and SBAR-guided huddle, verbalization of treatment plan, communication, teamwork, and nurse satisfaction. Eighty-three percent of patient encounters included a joint evaluation. A huddle structured with SBAR was conducted 86% of the time. Registered nurses and nurse practitioners verbalized patients' treatment plans in 89% of cases and 97% of cases, respectively. Improved teamwork, communication, and nursing satisfaction scores were demonstrated among the nurse practitioners and registered nurses. This project showed the feasibility of a simple and inexpensive joint nurse practitioner-registered nurse patient evaluation followed by a structured huddle, which improved communication, teamwork, and nurse satisfaction scores. This performance-improvement project has the potential to enhance efficiency by reducing redundancy, as well as to improve patient safety through the use of structured communication techniques. Copyright © 2015 Emergency Nurses Association. Published by Elsevier Inc. All rights reserved.
Joint Venture Health Plans May Give ACOs a Run for Their Money.
Reinke, Thomas
2016-12-01
Joint venture plans are starting to demonstrate their ability to implement clinical management and financial management reforms. A JV health plan replaces the offloading of financial risk by health plans to ill-equipped providers with an executive-level cost management committee stated jointly by the hospital and payer.
ERIC Educational Resources Information Center
Steele, David; Jones, Kevin
This paper describes a workshop prepared and presented by the Business Administration Department of the University of Wisconsin-Eau Claire, that is designed to provide training in evaluating a European market for an American product and preparing a plan for marketing the product in Europe. It is noted that the program can work with both students…
VA/DoD Joint Executive Council FY 2009: Joint Strategic Plan FY 2010-2012
2009-01-01
through the Military Health System (MHS) Population Health Portal . HEC Traumatic Brain Injury and Psychological Health In FY 2009, VA and DoD made...available using the Deployment Occupational and Environmental Health Surveillance Portal . TBI and MH assessment tools were evaluated and monitored through...with increased access, VA maintained the frequency of encounters for treatment of PTSD and other MH conditions in Veterans of prior eras. To forecast
Kroezen, Marieke; Van Hoegaerden, Michel; Batenburg, Ronald
2018-02-01
Health workforce (HWF) planning and forecasting is faced with a number of challenges, most notably a lack of consistent terminology, a lack of data, limited model-, demand-based- and future-based planning, and limited inter-country collaboration. The Joint Action on Health Workforce Planning and Forecasting (JAHWF, 2013-2016) aimed to move forward on the HWF planning process and support countries in tackling the key challenges facing the HWF and HWF planning. This paper synthesizes and discusses the results of the JAHWF. It is shown that the JAHWF has provided important steps towards improved HWF planning and forecasting across Europe, among others through the creation of a minimum data set for HWF planning and the 'Handbook on Health Workforce Planning Methodologies across EU countries'. At the same time, the context-sensitivity of HWF planning was repeatedly noticeable in the application of the tools through pilot- and feasibility studies. Further investments should be made by all actors involved to support and stimulate countries in their HWF efforts, among others by implementing the tools developed by the JAHWF in diverse national and regional contexts. Simultaneously, investments should be made in evaluation to build a more robust evidence base for HWF planning methods. Copyright © 2017 Elsevier B.V. All rights reserved.
1997-01-01
isolated targets, significantly reduce false alarms ( PFA = 0.01/km2), and recognize force structure (e.g., maneuver battalions). During FY97, a laboratory...probability of false alarm ( Pfa ) of 0.3 at an altitude of 500-1,000 ft and at airspeeds of 60-100 kn is planned. Enhanced COBRA optics-including a...hibiting the desired properties and initiate agent sorption assessments. The FY00 goal is to com- plete performance evaluations of candidate
Joint Test and Evaluation Procedures Manual.
1980-09-01
offices within 0oD such as ODDTE may allot funds to individual JTFs for purchasing goods and services. 1-12 Service support to JT&E is usually drawn...on underlying assumptions about the "real world," and that a good operational scenario may conflict with the assumptions for a specific statistical...Learned Since a good Data Management Plan is critical to the success of a joint test, some situations which have occurred in previous tests are listed
2012-03-01
Targeting Review Board OPLAN Operations Plan OPORD Operations Order OPSIT Operational Situation OSINT Open Source Intelligence OV...Analysis Evaluate FLTREPs MISREPs Unit Assign Assets Feedback Asset Shortfalls Multi-Int Collection Political & Embasy Law Enforcement HUMINT OSINT ...Embassy Information OSINT Manage Theater HUMINT Law Enforcement Collection Sort Requests Platform Information Agency Information M-I Collect
Stochastic Evolutionary Algorithms for Planning Robot Paths
NASA Technical Reports Server (NTRS)
Fink, Wolfgang; Aghazarian, Hrand; Huntsberger, Terrance; Terrile, Richard
2006-01-01
A computer program implements stochastic evolutionary algorithms for planning and optimizing collision-free paths for robots and their jointed limbs. Stochastic evolutionary algorithms can be made to produce acceptably close approximations to exact, optimal solutions for path-planning problems while often demanding much less computation than do exhaustive-search and deterministic inverse-kinematics algorithms that have been used previously for this purpose. Hence, the present software is better suited for application aboard robots having limited computing capabilities (see figure). The stochastic aspect lies in the use of simulated annealing to (1) prevent trapping of an optimization algorithm in local minima of an energy-like error measure by which the fitness of a trial solution is evaluated while (2) ensuring that the entire multidimensional configuration and parameter space of the path-planning problem is sampled efficiently with respect to both robot joint angles and computation time. Simulated annealing is an established technique for avoiding local minima in multidimensional optimization problems, but has not, until now, been applied to planning collision-free robot paths by use of low-power computers.
2007-01-25
the joint staff (J-6) and the intelligence directorate of a joint staff (J-2). The joint restricted frequency list (JRFL) is prepared and promulgated...J-3, and J-6, prepares a joint restricted frequency list (JRFL) for approval by the J-3 (through the information operations [IO] cell or equivalent...SPECTRUM MANAGEMENT PLAN DEGRADATION REPORTS ASSESS FREQUENCY PLAN EFFECTIVENESS UPDATE ASSIGNMENTS UPDATE JOINT RESTRICTED FREQUENCY LIST (JRFL
CTS digital video college curriculum-sharing experiment. [Communications Technology Satellite
NASA Technical Reports Server (NTRS)
Lumb, D. R.; Sites, M. J.
1974-01-01
NASA-Ames Research Center, Stanford University, and Carleton University, Ottawa, Canada, are participating in a joint experiment to evaluate the feasibility and effectiveness of college curriculum sharing using compressed digital television and the Communications Technology Satellite (CTS). Each university will offer televised courses to the other during the 1976-1977 academic year via CTS, a joint program by NASA and the Canadian Department of Communications. The video compression techniques to be demonstrated will enable economical interconnection of educational institutions using existing and planned domestic satellites.
DOT National Transportation Integrated Search
2017-07-26
The datasets in this zip file are in support of Intelligent Transportation Systems Joint Program Office (ITS JPO) report FHWA-JPO-16-385, "Analysis, Modeling, and Simulation (AMS) Testbed Development and Evaluation to Support Dynamic Mobility Applica...
Haung, Ching-Ying; Wang, Sheng-Pen; Chiang, Chih-Wei
2010-01-01
Medical tourism is a relatively recent global economic and political phenomenon that has assumed increasing importance for developing countries, particularly in Asia. In fact, Taiwan possesses a niche for developing medical tourism because many hospitals provide state-of-the-art medicine in all disciplines and many doctors are trained in the United States (US). Among the most common medical procedures outsourced, joint replacements such as total knee replacement (TKR) and total hip replacement (THR) are two surgeries offered to US patients at a lower cost and shorter waiting time than in the US. This paper proposed a pre-checking medical tourism system (PCMTS) and evaluated the cost feasibility of recruiting American clients traveling to Taiwan for joint replacement surgery. Cost analysis was used to estimate the prime costs for each stage in the proposed PCMTS. Sensitivity analysis was implemented to examine how different pricings for medical checking and a surgical operation (MC&SO) and recovery, can influence the surplus per patient considering the PCMTS. Finally, the break-even method was adopted to test the tradeoff between the sunk costs of investment in the PCMTS and the annual surplus for participating hospitals. A novel business plan was built showing that pre-checking stations in medical tourism can provide post-operative care and recovery follow-up. Adjustable pricing for hospital administrators engaged in the PCMTS consisted of two main costs: US$3,700 for MC&SO and US$120 for the hospital stay. Guidelines for pricing were provided to maximize the annual surplus from this plan with different number of patients participating in PCMTS. The maximal profit margin from each American patient undertaking joint surgery is about US$24,315. Using cost analysis, this article might be the first to evaluate the feasibility of PCMTS for joint replacement surgeries. The research framework in this article is applicable when hospital administrators evaluate the feasibility of outsourced medical procedures other than TKR and THR.
Development of the joint munitions planning system - a planning tool for the ammunition community.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hummel, J. R.; Winiecki, A. L.; Fowler, R. S.
2004-10-01
The United States Army Joint Munitions Command (JMC) is the executive agent for the Single Manager for Conventional Ammunition (SMCA). As such the JMC is responsible for the storage and transportation of all Service's SMCA as well as non-SMCA munitions. Part of the JMC mission requires that complex depot capacity studies, transportation capabilities analyses, peacetime re-allocations/ redistribution plans and time-phased deployment distribution plans be developed. Beginning in 1999 the Joint Munitions Planning System (JMPS) was developed to provide sourcing and movement solutions of ammunition for military planners.
1972-09-19
Dextrinated Lead Azide. ŕ.4.2 Reports. Applied Mathematic Panel of the National Defense Research Committee (AMP Report No. t01.1R, SRG-P No. 40). 1-2 0D 44811... dextrinated lead azide. (A normal ranae for these compounds shall have been obtained at the time of testing the explosive to be qualified.) 4.3...normal lead styphnate and dextrinated lead azide obtained using the same apparatus and procedure and run at the same time. 4.3.5 Special Requirements
Reinecke, K.J.; Loesch, C.R.; Birkan, Marcel
1996-01-01
Efforts to conserve winter habitat for wildfowl, Anatidae, in the alluvial valley of the lower Mississippi River, U.S.A., are directed by the Lower Mississippi Valley (LMV) Joint Venture of the North American Waterfowl Management Plan (NA WMP). The Joint Venture is based on a biological framework developed through cooperative planning by wildfowl researchers and managers. Important elements of the framework include: (1) numeric population goals, (2) assumptions about potential limiting factors, (3) explicit relationships between wildfowl abundance and habitat characteristics, (4) numeric foraging habitat goals, and (5) criteria for evaluating success. The population goal of the Joint Venture for the Mississippi Alluvial Valley (MA V) is to enable 4.3 million ducks to, survive winter and join continental breeding populations in spring. Currently, available data suggest that foraging habitat is the primary factor limiting duck populations in the MA II. To establish a goal for foraging habitat, we assumed the length of the wintering period is 110 days and calculated that a population of 4.3 million breeding ducks (plus 15% to account for winter mortality) would need 546 million duck-days of food in the preceding winter. Then, we used estimates of daily energy requirements, food densities, and food energy values to calculate the carrying capacity or number of duck-days of food available in the three primary foraging habitats in the MAV (flooded croplands, forested wetlands, and moist-soil wetlands). Thus, availability of foraging habitat can be used as a criterion for evaluating success of the Joint Venture if accurate inventories of foraging habitat can be conducted. Development of an explicit biological framework for the Joint Venture enabled wildfowl managers and researchers to establish specific objectives for management of foraging habitat and identify priority problems requiring further study.
Army Networks: Opportunities Exist to Better Utilize Results from Network Integration Evaluations
2013-08-01
monitor operations; a touch screen-based mission command planning tool; and an antenna mast . The Army will field only one of these systems in capability...Office JTRS Joint Tactical Radio System NIE Network Integration Evaluation OSD Office of the Secretary of Defense SUE System under Evaluation...command systems . A robust transport layer capable of delivering voice, data, imagery, and video to the tactical edge (i.e., the forward battle lines
Federal Register 2010, 2011, 2012, 2013, 2014
2011-01-28
... Collection, Consolidation and Dissemination of Quotation and Transaction Information for Nasdaq-Listed... Exchange, Inc., EDGX Exchange, Inc., Financial Industry Regulatory Authority, Inc., International... Joint Self-Regulatory Organization Plan Governing the Collection, Consolidation, and Dissemination of...
Henderson, Claire; Farrelly, Simone; Flach, Clare; Borschmann, Rohan; Birchwood, Max; Thornicroft, Graham; Waheed, Waquas; Szmukler, George
2017-11-24
In the UK, crisis planning for mental health care should acknowledge the right to make an informed advance treatment refusal under the Mental Capacity Act 2005. Our aims were to estimate the demand for such treatment refusals within a sample of service users who had had a recent hospital admission for psychosis or bipolar disorder, and to examine the relationship between refusals, and service user characteristics. To identify refusals we conducted content analysis of Joint Crisis Plans, which are plans formulated by service users and their clinical team with involvement from an external facilitator, and routine care plans in sub-samples from a multi-centre randomised controlled trial of Joint Crisis Plans (plus routine mental health care) versus routine care alone (CRIMSON) in England. Factors hypothesised to be associated with refusals were identified using the trial data collected through baseline interviews of service users and clinicians and collection of routine clinical data. Ninety-nine of 221 (45%) of the Joint Crisis Plans contained a treatment refusal compared to 10 of 424 (2.4%) baseline routine care plans. No Joint Crisis Plans recorded disagreement with refusals on the part of clinicians. Among those with completed Joint Crisis Plans, adjusted analyses indicated a significant association between treatment refusals and perceived coercion at baseline (odds ratio = 1.21, 95% CI 1.02-1.43), but not with baseline working alliance or a past history of involuntary admission. We demonstrated significant demand for written treatment refusals in line with the Mental Capacity Act 2005, which had not previously been elicited by the process of treatment planning. Future treatment/crisis plans should incorporate the opportunity for service users to record a treatment refusal during the drafting of such plans. ISRCTN11501328 Registered 13th March 2008.
Final Environmental Assessment: For Joint Base Anacostia-Bolling Master Plan District of Columbia
2010-09-30
the impacts of vehicle travel and facilitate alternative modes of transportation that would reduce air pollutants . Noise: There would be...ltlb•nKM nr~t~~G.,~ StEiiubetlls Fort McNair East Potomac Pari < Poplar Point "" Joint Base Anacostia-Bolling Master Plan Environmental...Industrial $uppon Eost Potomac Pari < Poplar Point Joint Base Anacostia-Bolling Master Plan Environmental Assessment pg. 16 Several general
Federal Register 2010, 2011, 2012, 2013, 2014
2013-11-06
... SECURITIES AND EXCHANGE COMMISSION [Release No. 34-70793; File No. S7-24-89] Joint Industry Plan..., Consolidation and Dissemination of Quotation and Transaction Information for Nasdaq-Listed Securities Traded on... Exchange, Inc., Financial Industry Regulatory Authority, Inc., International Securities Exchange LLC...
Joint ETV/NOWATECH test plan for the Sorbisense GSW40 passive sampler
The joint test plan is the implementation of a test design developed for verification of the performance of an environmental technology following the NOWATECH ETV method. The verification is a joint verification with the US EPA ETV scheme and the Advanced Monitoring Systems Cent...
Health Factors Influencing Education of American Indians. A Position Paper.
ERIC Educational Resources Information Center
deMontigny, Lionel H.
The resume of health problems facing the American Indian school child emphasized that health, culture, education, and economics are mutually interdependent and must be evaluated and planned for jointly. Specific health problems discussed include general health, nutrition, fever and chronic illness, hearing, sight, and mental health.…
77 FR 10403 - Airworthiness Directives; The Boeing Company Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2012-02-22
... provided guidance for this determination in Advisory Circular (AC) 25.1529-1A. (d) Subject Joint Aircraft... Limitations Section of the maintenance planning data (MPD) document. Since we issued that AD, a re-evaluation... revise the maintenance program to incorporate an additional limitation, and would add airplanes to the...
Current Work on Telecommunications Policies and Structures.
ERIC Educational Resources Information Center
Ohlin, Thomas
The studies described in this paper were undertaken to evaluate the usefulness of information-exchange techniques for promoting the quality of life within given regions of a society. The first analysis describes the investigation of projects to enhance the functions of small businesses, joint regional planning, health care, education,…
A Description of the DoD Test and Evaluation Process for Electronic Warfare Systems
1994-06-13
Center J-MASS Joint Modeling and Simulation System A-2 MDA Milestone Decision Authority MNS Mission Need Statement MOE Measument of Effectivenes MOP...PSYCHOLOGICAL OPERATIONS (PSYOP) Planned operations to convey selected information and indicators to foreign audiences to influence their emotions, motive
Federal Register 2010, 2011, 2012, 2013, 2014
2013-11-01
... SECURITIES AND EXCHANGE COMMISSION [Release No. 34-70765; File No. 4-443] Joint Industry Plan; Notice of Filing and Immediate Effectiveness of Amendment to the Plan for the Purpose of Developing and Implementing Procedures Designed To Facilitate the Listing and Trading of Standardized Options To Add Topaz Exchange, LLC as a Plan Sponsor October...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-05-13
... processor to create and make available depth-of-book displays; the incorporation into the Plan of the... Elizabeth Murphy, Secretary, Commission, dated February 26, 2010. \\6\\ The complete text of the Plan, as... to submit its projected capacity needs directly to the Plan's Processor. The process avoids any need...
Case-Based Planning: An Integrated Theory of Planning, Learning and Memory
1986-10-01
rtvoeoo oldo II nocomtmry and Idonltly by block numbor) planning Case-based reasoning learning Artificial Intelligence 20. ABSTRACT (Conllnum...Computational Model of Analogical Prob- lem Solving, Proceedings of the Seventh International Joint Conference on Artificial Intelligence ...Understanding and Generalizing Plans., Proceedings of the Eight Interna- tional Joint Conference on Artificial Intelligence , IJCAI, Karlsrhue, Germany
Joint crisis plans and psychiatric advance directives in German psychiatric practice.
Radenbach, Katrin; Falkai, Peter; Weber-Reich, Traudel; Simon, Alfred
2014-05-01
This study explores the attitude of German psychiatrists in leading positions towards joint crisis plans and psychiatric advance directives. This topic was examined by contacting 473 medical directors of German psychiatric hospitals and departments. They were asked to complete a questionnaire developed by us. That form contained questions about the incidence and acceptance of joint crisis plans and psychiatric advance directives and previous experiences with them. 108 medical directors of psychiatric hospitals and departments responded (response rate: 22.8%). Their answers demonstrate that in their hospitals these documents are rarely used. Among the respondents, joint crisis plans are more accepted than psychiatric advance directives. There is a certain uncertainty when dealing with these instruments. Our main conclusion is that German psychiatry needs an intensified discussion on the use of instruments for patients to constitute procedures for future critical psychiatric events. For this purpose it will be helpful to collect more empirical data. Furthermore, the proposal of joint crisis plans in psychiatric hospitals and departments should be discussed as well as the possibility of consulting an expert during the preparation of a psychiatric advance directive.
24 CFR 943.118 - What is a consortium?
Code of Federal Regulations, 2010 CFR
2010-04-01
... DEVELOPMENT PUBLIC HOUSING AGENCY CONSORTIA AND JOINT VENTURES Consortia § 943.118 What is a consortium? A... consortium also submits a joint PHA Plan. The lead agency collects the assistance funds from HUD that would... same fiscal year so that the applicable periods for submission and review of the joint PHA Plan are the...
76 FR 23995 - Gulf of Mexico Fishery Management Council; Public Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2011-04-29
...; Joint Amendment 10 to the Spiny Lobster Fishery Management Plan for the Gulf of Mexico and South...: 813-348-1630. SUPPLEMENTARY INFORMATION: Spiny Lobster Public hearings will be held on Joint Amendment 10 to the Spiny Lobster Fishery Management Plan for the Gulf of Mexico and South Atlantic. Joint...
NASA Technical Reports Server (NTRS)
Chung, Ching-Luan
1990-01-01
The term trajectory planning has been used to refer to the process of determining the time history of joint trajectory of each joint variable corresponding to a specified trajectory of the end effector. The trajectory planning problem was solved as a purely kinematic problem. The drawback is that there is no guarantee that the actuators can deliver the effort necessary to track the planned trajectory. To overcome this limitation, a motion planning approach which addresses the kinematics, dynamics, and feedback control of a manipulator in a unified framework was developed. Actuator constraints are taken into account explicitly and a priori in the synthesis of the feedback control law. Therefore the result of applying the motion planning approach described is not only the determination of the entire set of joint trajectories but also a complete specification of the feedback control strategy which would yield these joint trajectories without violating actuator constraints. The effectiveness of the unified motion planning approach is demonstrated on two problems which are of practical interest in manipulator robotics.
Upper-limb kinematic reconstruction during stroke robot-aided therapy.
Papaleo, E; Zollo, L; Garcia-Aracil, N; Badesa, F J; Morales, R; Mazzoleni, S; Sterzi, S; Guglielmelli, E
2015-09-01
The paper proposes a novel method for an accurate and unobtrusive reconstruction of the upper-limb kinematics of stroke patients during robot-aided rehabilitation tasks with end-effector machines. The method is based on a robust analytic procedure for inverse kinematics that simply uses, in addition to hand pose data provided by the robot, upper arm acceleration measurements for computing a constraint on elbow position; it is exploited for task space augmentation. The proposed method can enable in-depth comprehension of planning strategy of stroke patients in the joint space and, consequently, allow developing therapies tailored for their residual motor capabilities. The experimental validation has a twofold purpose: (1) a comparative analysis with an optoelectronic motion capturing system is used to assess the method capability to reconstruct joint motion; (2) the application of the method to healthy and stroke subjects during circle-drawing tasks with InMotion2 robot is used to evaluate its efficacy in discriminating stroke from healthy behavior. The experimental results have shown that arm angles are reconstructed with a RMSE of 8.3 × 10(-3) rad. Moreover, the comparison between healthy and stroke subjects has revealed different features in the joint space in terms of mean values and standard deviations, which also allow assessing inter- and intra-subject variability. The findings of this study contribute to the investigation of motor performance in the joint space and Cartesian space of stroke patients undergoing robot-aided therapy, thus allowing: (1) evaluating the outcomes of the therapeutic approach, (2) re-planning the robotic treatment based on patient needs, and (3) understanding pathology-related motor strategies.
Indonesia; World Bank assists Second Population Project.
1977-01-01
Indonesia's First Population Project, funded jointly by the International Development Association and UNFPA, was started in 1972 and provided for construction of service and training facilities, equipment, research and evaluation studies, education, and communication activities. The national family planning program has made progress in the last 20 years. Acceptor and family planning personnel statistics are given. The World Bank has recently awarded Indonesia a loan to fund its Second Population Project, to aid in reaching the goal of a 50% reduction in fertility by 2000.
Federal Register 2010, 2011, 2012, 2013, 2014
2011-01-28
... Organization Plan Governing the Collection, Consolidation and Dissemination of Quotation and Transaction...., EDGA Exchange, Inc., EDGX Exchange, Inc., Financial Industry Regulatory Authority, Inc., International... Joint Self-Regulatory Organization Plan Governing the Collection, Consolidation, and Dissemination of...
Planning for Multiagent Using ASP-Prolog
NASA Astrophysics Data System (ADS)
Son, Tran Cao; Pontelli, Enrico; Nguyen, Ngoc-Hieu
This paper presents an Answer Set Programming based approach to multiagent planning. The proposed methodology extends the action language \\cal B in [12] to represent and reason about plans with cooperative actions of an individual agent operating in a multiagent environment. This language is used to formalize multiagent planning problems and the notion of a joint plan for multiagent in the presence of cooperative actions. Finally, the paper presents a system for computing joint plans based on the ASP-Prolog system.
Draft Plan for Characterizing Commercial Data Products in Support of Earth Science Research
NASA Technical Reports Server (NTRS)
Ryan, Robert E.; Terrie, Greg; Berglund, Judith
2006-01-01
This presentation introduces a draft plan for characterizing commercial data products for Earth science research. The general approach to the commercial product verification and validation includes focused selection of a readily available commercial remote sensing products that support Earth science research. Ongoing product verification and characterization will question whether the product meets specifications and will examine its fundamental properties, potential and limitations. Validation will encourage product evaluation for specific science research and applications. Specific commercial products included in the characterization plan include high-spatial-resolution multispectral (HSMS) imagery and LIDAR data products. Future efforts in this process will include briefing NASA headquarters and modifying plans based on feedback, increased engagement with the science community and refinement of details, coordination with commercial vendors and The Joint Agency Commercial Imagery Evaluation (JACIE) for HSMS satellite acquisitions, acquiring waveform LIDAR data and performing verification and validation.
Federal Register 2010, 2011, 2012, 2013, 2014
2013-11-01
... SECURITIES AND EXCHANGE COMMISSION [Release No. 34-70764; File No. 4-443] Joint Industry Plan; Notice of Filing and Immediate Effectiveness of Amendment to the Plan for the Purpose of Developing and Implementing Procedures Designed To Facilitate the Listing and Trading of Standardized Options To Add Miami International Securities Exchange, LLC (...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-09-03
... SECURITIES AND EXCHANGE COMMISSION [Release No. 34-70274; File No. 4-631] Joint Industry Plan; Notice of Filing of the Fifth Amendment to the National Market System Plan To Address Extraordinary Market Volatility by BATS Exchange, Inc., BATS Y-Exchange, Inc., Chicago Board Options Exchange, Incorporated, Chicago Stock Exchange, Inc., EDGA...
Development of Thermal Barriers For Solid Rocket Motor Nozzle Joints
NASA Technical Reports Server (NTRS)
Steinetz, Bruce M.; Dunlap, Patrick H., Jr.
2000-01-01
Joints in the Space Shuttle solid rocket motors are sealed by O-rings to contain combustion gases inside the rocket that reach pressures of up to 900 psi and temperatures of up to 5500 F. To provide protection for the O-rings, the motors are insulated with either phenolic or rubber insulation. Gaps in the joints leading up to the O-rings are filled with polysulfide joint-fill compounds as an additional level of protection. The current RSRM nozzle-to-case joint design incorporating primary, secondary, and wiper O-rings experiences gas paths through the joint-fill compound to the innermost wiper O-ring in about one out of every seven motors. Although this does not pose a safety hazard to the motor, it is an undesirable condition that NASA and rocket manufacturer Thiokol want to eliminate. Each nozzle-to-case joint gas path results in extensive reviews and evaluation before flights can be resumed. Thiokol and NASA Marshall are currently working to improve the nozzle-to-case joint design by implementing a more reliable J-leg design that has been used successfully in the field and igniter joint. They are also planning to incorporate the NASA Glenn braided carbon fiber thermal barrier into the joint. The thermal barrier would act as an additional level of protection for the O-rings and allow the elimination of the joint-fill compound from the joint.
Sharma, Naveen; Mandloi, Avinash; Agrawal, Ashish; Singh, Shailendra
2016-01-01
The clavicle, humerus and acromioclavicular (AC) joint separately are very commonly involved in traumatic injuries around the shoulder. Acromioclavicular joint dislocation with distal clavicle fracture is a well recognized entity in clinical practice. AC joint dislocation with mid shaft clavicle fracture is uncommon and only few cases have been reported in literature. However, to the best of our knowledge, this is the first case report to describe an acromioclavicular dislocation with ipsilateral mid shaft clavicle, mid shaft humerus and coracoid process fracture. Fractures of the humerus and clavicle along with the acromioclavicular joint dislocation were fixed at the same setting. A 65-year-old male met with a high velocity road traffic accident. Plain radiographs showed displaced mid third clavicle fracture with acromioclavicular joint dislocation with mid shaft humerus fracture. Surgical fixation was planned for humerus with interlocking nail, clavicle with locking plate and acromioclavicular joint with reconstruction of coracoclavicular ligaments. Intraoperatively, coracoid process was found to have a comminuted fracture. The operative plan had to be changed on table as coracoclavicular fixation was not possible. So acromioclavicular joint fixation was done using tension band wiring and the coracoclavicular ligament was repaired using a 2-0 ethibond. The comminuted coracoid fracture was managed conservatively. K wires were removed at 6 weeks. Early mobilization was started. In acromioclavicular joint injuries, clavicle must be evaluated for any injury. Although it is more commonly associated with distal clavicle fractures, it can be associated with middle third clavicle fractures. As plain radiographs, AP view are most of the times insufficient for viewing integrity of coracoid process, either special views like Stryker notch or CT scan may help in diagnosing such concealed injuries. When associated with fractures of the humerus and clavicle, anatomical restoration of acromioclavicular joint along with anatomical reduction and a rigid fixation of associated fractures is essential. Proper rehabilitation protocol is a must for achieving promising results. In our case, we were able to achieve a stable surgical fixation of both the fractures as well as AC joint, which enabled us to start early joint mobilization and rehabilitation.
Talents Unlimited Program: Summary of Research Finding for 1979-80.
ERIC Educational Resources Information Center
McLean, James E.; Chissom, Brad S.
During the 1979-80 school year, the Talents Unlimited (TU) program (validated by the Joint Dissemination Review Panel) for talented students in grades 1 through 6 was evaluated by nine adopting school systems. Five talent areas were addressed: communication, forecasting, decision making, productive thinking, and planning. Data were analyzed for…
Federal Register 2010, 2011, 2012, 2013, 2014
2013-09-23
... SECURITIES AND EXCHANGE COMMISSION [Release No. 34-70429; File No. S7-24-89] Joint Industry Plan... Collection, Consolidation and Dissemination of Quotation and Transaction Information for Nasdaq-Listed... Exchange, Inc., New York Stock Exchange LLC, NYSE MKT LLC, and NYSE Arca, Inc. September 17, 2013. Pursuant...
Apollo Soyuz mission planning and operations
NASA Technical Reports Server (NTRS)
Frank, M. P., III
1976-01-01
The paper describes the Apollo Soyuz project from the points of view of working group organization, mission plan definition, joint operations concept, and mission preparation. The concept for joint operations considered contingency situations as well as nominal operations. Preparations for the joint flight included cooperative tracking tests and combined training of the flight crews and mission control personnel.
Joint Service Solvent Substitution (JS3)
2012-05-01
Process Evaluation Acceptance Criteria Market Research Demonstration Plan Demonstration Validate Implementation Approval Start Approval...PRF-63460D Mg (AZ 31B-H24) mg/cm^2 0.7 Mg (SAE AMS 4377) “ Al (AMS-QQ-A-250) “ Al (7075-T6) “ 0.49 Ti (AMS 4911, 6AL- 4V ...properties – Evaluation of vendor test results – Industry experience – DOD Aerospace & Shipbuilding NESHAP experience Market Research 21 Approved for
Federal Register 2010, 2011, 2012, 2013, 2014
2011-07-29
... Resource Management Plans for Puget Sound Hatchery Programs and Reopening of Comment Period AGENCY... prepare an Environmental Impact Statement (EIS) for two hatchery Resource Management Plans and appended Hatchery and Genetic Management Plans (HGMPs) jointly proposed by the Washington Department of Fish and...
The Development of Action Planning in a Joint Action Context
ERIC Educational Resources Information Center
Paulus, Markus
2016-01-01
The ability to act jointly with another person is a fundamental requirement for participation in social life. The current study examines the development of action planning in a joint action context. In 4 experiments, 3-, 5-, and 7-year-old children as well as a group of adults (n = 196) interacted with another person to operate a novel apparatus.…
Arnold, Pamela; Scheurer, Danielle; Dake, Andrew W; Hedgpeth, Angela; Hutto, Amy; Colquitt, Caroline; Hermayer, Kathie L
2016-04-01
The Joint Commission Advanced Inpatient Diabetes Certification Program is founded on the American Diabetes Association's Clinical Practice Recommendations and is linked to the Joint Commission Standards. Diabetes currently affects 29.1 million people in the USA and another 86 million Americans are estimated to have pre-diabetes. On a daily basis at the Medical University of South Carolina (MUSC) Medical Center, there are approximately 130-150 inpatients with a diagnosis of diabetes. The program encompasses all service lines at MUSC. Some important features of the program include: a program champion or champion team, written blood glucose monitoring protocols, staff education in diabetes management, medical record identification of diabetes, a plan coordinating insulin and meal delivery, plans for treatment of hypoglycemia and hyperglycemia, data collection for incidence of hypoglycemia, and patient education on self-management of diabetes. The major clinical components to develop, implement, and evaluate an inpatient diabetes care program are: I. Program management, II. Delivering or facilitating clinical care, III. Supporting self-management, IV. Clinical information management and V. performance measurement. The standards receive guidance from a Disease-Specific Care Certification Advisory Committee, and the Standards and Survey Procedures Committee of the Joint Commission Board of Commissioners. The Joint Commission-ADA Advanced Inpatient Diabetes Certification represents a clinical program of excellence, improved processes of care, means to enhance contract negotiations with providers, ability to create an environment of teamwork, and heightened communication within the organization. Published by Elsevier Inc.
Evaluation of waterfowl conservation under the North American Waterfowl Management Plan
Williams, B.K.; Koneff, M.D.; Stith, David A.
1999-01-01
In 1986, the North American Waterfowl Management Plan (Plan) was signed by the U.S. Secretary of the Interior and the Canadian Minister of the Environment, with a goal of restoring waterfowl populations to levels of the 1970s via habitat conservation. Central to the Plan is a set of ambitious continental population goals and habitat objectives to be met through broad-based public-private partnerships. Inadequate attention has been paid to evaluation of the Plan, despite the fact that Plan delivery can be enhanced via improved understanding of the effects of habitat conservation on waterfowl population dynamics. Several factors confound the effort to evaluate the Plan at regional and continental levels, including difficulties in accounting for national land-use policies. To date, evaluation has proceeded along 2 avenues of investigation: (1) the study of conservation actions at local-regional levels, and (2) statistical assessment of Plan assumptions. Among other things, results thus far indicate duck production from the U.S. Northern Great Plains has increased in recent years, and intensive treatments such as planted cover have had positive effects on local reproductive success. Many duck species currently exceed Plan population goals; however, population levels of some species, most notably northern pintail (Anas acuta), remain below expectations based on historic relationships with precipitation. Management implications include the need for ongoing and more carefully prioritized conservation efforts, broader partnerships, and improved understanding of the linkages between habitats and biological processes. Delivery of the Plan must involve collaboration among the Continental Evaluation Team, joint Venture partners, the Adaptive Management and Assessment Team of the U.S. Fish and Wildlife Service, and other conservation groups. Although the challenges and projected costs of Plan conservation efforts are considerable, the long-term potential benefits to waterfowl conservation are great.
Nuclear Thermal Propulsion Technology - Summary of FY 1991 Interagency Panel Planning
NASA Technical Reports Server (NTRS)
Clark, John S.; Mcdaniel, Patrick; Howe, Steven; Stanley, Marland
1991-01-01
An Interagency (NASA/DOE/DOD) technical panel has been working in 1991 to evaluate nuclear thermal propulsion (NTP) concepts on a consistent basis, and to continue technology development project planning for a joint project in nuclear propulsion for Space Exploration Initiative (SEI). This paper summarizes the efforts of the panel to date and summarizes the technology plans defined for NTP. Concepts were categorized based on probable technology readiness data, and innovative 'proof-of-concept' tests and analyses were defined. While further studies will be required to provide a consistent comparison of all of the NTP concepts, the current status of the studies is presented.
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1999-07-15
The U.S. Department of Energy (DOE) and the U.S. Department of the Army (DA) are conducting cleanup activities at two properties--the DOE chemical plant area and the DA ordnance works area (the latter includes the training area)--located in the Weldon Spring area in St. Charles County, Missouri. These areas are on the National Priorities List (NPL), and cleanup activities at both areas are conducted in accordance with the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), as amended. DOE and DA are conducting a joint remedial investigation (RI) and baseline risk assessment (BRA) as part of the remedial investigation/feasibility studymore » (RI/FS) for the groundwater operable units for the two areas. This joint effort will optimize further data collection and interpretation efforts and facilitate overall remedial decision making since the aquifer of concern is common to both areas. A Work Plan issued jointly in 1995 by DOE and the DA discusses the results of investigations completed at the time of preparation of the report. The investigations were necessary to provide an understanding of the groundwater system beneath the chemical plant area and the ordnance works area. The Work Plan also identifies additional data requirements for verification of the evaluation presented.« less
Improving Therapeutic Relationships: Joint Crisis Planning for Individuals With Psychotic Disorders.
Farrelly, Simone; Lester, Helen; Rose, Diana; Birchwood, Max; Marshall, Max; Waheed, Waquas; Henderson, R Claire; Szmukler, George; Thornicroft, Graham
2015-12-01
Outcomes for individuals with psychosis remain far from acceptable. Recently, prominent psychiatrists have called for an improved understanding of the impact of social contexts, and how social contexts might influence the development and maintenance of mental health problems. A key social context for individuals with psychosis is the therapeutic relationship. As part of a trial of joint crisis planning in England, this qualitative study aimed to determine the mechanism through which joint crisis planning might affect the therapeutic relationship. Results suggest that routine processes in mental health care are affected by policy and organizational requirements for risk mitigation-aspects that undermine person-centered approaches. In contrast, strong therapeutic relationships are characterized by individualized care and reliable and respectful treatment. The Joint Crisis Plan intervention partially succeeded in reducing contextual influences on routine role enactments, facilitating the demonstration of respect and improving the therapeutic relationship. © The Author(s) 2015.
Development of a Goal Setting Process and Instrumentation for Teachers and Principals.
ERIC Educational Resources Information Center
Minix, Nancy; And Others
A pilot program, the Career Ladder Plan, was developed in Kentucky to evaluate a teacher's performance in terms of professional growth and development and professional leadership/initiative based on that teacher's performance on a setting/goal attainment process. Goals jointly selected by the teacher and his/her principal must contribute to school…
Readers of the Round Table: The 1998 Joint Kentucky - Arizona Reading Program.
ERIC Educational Resources Information Center
Kentucky State Dept. for Libraries and Archives, Frankfort.
Intended to encourage children of all ages to read over the summer, this manual presents library-based programs, crafts, displays, and events with a medieval theme. The chapters of the manual are: (1) Introductory Materials; (2) Goals, Objectives and Evaluation; (3) Getting Started; (4) Common Program Structures; (5) Planning Timeline; (6)…
The Joint Staff Strategic Information Technology Plan
1995-09-01
analyses or assessments. Gaming Division ( SAGD ) is responsible for: This element also addresses the modification of existing applications necessary to...Joint Military Net Assessment, and the Joint Strategic Planning System. SAGD Gaming Suite: SAGD’s mission has • undergone revision and expansion, As...situations using both gaming and analytical assessments. approaches. Table 3 gives characteristics of some of the types of applications that SAGD has • * 4
Federal Register 2010, 2011, 2012, 2013, 2014
2011-01-28
... Organization Plan Governing the Collection, Consolidation and Dissemination of Quotation and Transaction...., EDGA Exchange, Inc., EDGX Exchange, Inc., Financial Industry Regulatory Authority, Inc., International... Joint Self- [[Page 5228
The need for strategic tax planning among nonprofit hospitals.
Smith, Pamela C
2005-01-01
Strategic tax planning issues are important to the nonprofit health care sector, despite its philanthropic mission. The consolidation of the industry has led management to fight for resources and develop alternative strategies for raising money. When management evaluates alternative collaborative structures to increase efficiency, the impact on governance structures must also be considered. The increased governmental scrutiny of joint ventures within the health care sector warrants management's attention as well. The financial incentives must be considered, along with the various tax policy implications of cross-sector collaborations.
Percutaneous CT-guided sacroiliac joint sampling for infection: aspiration, biopsy, and technique.
Knipp, David; Simeone, F Joseph; Nelson, Sandra B; Huang, Ambrose J; Chang, Connie Y
2018-04-01
To evaluate methods of CT-guided sacroiliac joint sampling in patients with suspected infection. All CT-guided sacroiliac joint sampling procedures for suspected infection were reviewed for sampling type (aspiration, lavage aspiration, biopsy), microbiology results, and clinical and imaging follow-up. The primary gold standard was anatomic pathology. If pathology was not available, then positive blood culture with the same organism as SIJ sampling, imaging and clinical follow-up, or clinical follow-up only were used. Anterior and posterior joint distention was evaluated by MRI within 7 days of the procedure. A total of 34 patients (age 39 ± 20 (range, 6-75) years; 21 F, 13 M) were included. Aspiration samples only were obtained in 13/34 (38%) cases, biopsy samples only in 9/34 (26%) cases, and both samples in 12/34 (35%) cases. There was an overall 54% sensitivity and 86% specificity. For the aspiration samples, sensitivity and specificity were 60 and 81%, respectively, compared to 45 and 90% for the biopsy samples. In cases with both samples, biopsy did not add additional microbial information. Seventeen (17/34, 50%) patients had an MRI. The anterior joint was more distended than the posterior joint in 15/17 (88%) of patients, and this difference was significant (P = 0.0003). All of these 17 patients had an attempted aspiration by a posterior approach; 6/17 (35%) resulted in a successful aspiration. Aspiration of the sacroiliac joint has a higher sensitivity than biopsy and should always be attempted first. MRI may be helpful for procedure planning.
Federal Register 2010, 2011, 2012, 2013, 2014
2013-09-03
... SECURITIES AND EXCHANGE COMMISSION [Release No. 34-70273; File No. 4-631] Joint Industry Plan; Notice of Filing and Immediate Effectiveness of the Fourth Amendment to the National Market System Plan To Address Extraordinary Market Volatility by BATS Exchange, Inc., BATS Y- Exchange, Inc., Chicago Board Options Exchange, Incorporated, Chicago...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-02-26
... SECURITIES AND EXCHANGE COMMISSION [Release No. 34-68953; File No. 4-631] Joint Industry Plan; Notice of Filing and Immediate Effectiveness of the Second Amendment to the National Market System Plan To Address Extraordinary Market Volatility by BATS Exchange, Inc., BATS Y- Exchange, Inc., Chicago Board Options Exchange, Incorporated, Chicago...
Aromatherapy massage for joint pain and constipation in a patient with Guillian Barré.
Shirreffs, C M
2001-05-01
The following case study will look at the efficacy of aromatherapy massage in a patient diagnosed with Guillian Barré Syndrome admitted to an IntensiveTherapy Unit. The pathophysiology of this disorder will be discussed, medical treatment will be outlined and adjuncts to conventional nursing care will be presented. Aromatherapy massage was used to complement the conventional nursing and medical treatment of joint pain and constipation. The Mead Model for nursing care was used for assessment and the plan of care devised from this. Evaluation of outcomes were incorporated into the implementation protocol to ensure positive outcomes were achieved.
A Need to Know: The Role of Air Force Reconnaissance in War Planning, 1945-1953
2004-02-01
a pro- found change in doctrine. In Joint Emergency War Plan Broiler , the JCS continued their reliance on strategic air war, but the doctrinal basis...com- pleted Joint Emergency War Plan Broiler , which resembled Pincher’s plans in some respects. The United States assumed an accidental outbreak of...theless, while Pincher reflected the Spaatz board assessment, Broiler relied heavily on atomic bombs. In other words, instead of a strategic campaign
Measurement of complex joint trajectories using slice-to-volume 2D/3D registration and cine MR
NASA Astrophysics Data System (ADS)
Bloch, C.; Figl, M.; Gendrin, C.; Weber, C.; Unger, E.; Aldrian, S.; Birkfellner, W.
2010-02-01
A method for studying the in vivo kinematics of complex joints is presented. It is based on automatic fusion of single slice cine MR images capturing the dynamics and a static MR volume. With the joint at rest the 3D scan is taken. In the data the anatomical compartments are identified and segmented resulting in a 3D volume of each individual part. In each of the cine MR images the joint parts are segmented and their pose and position are derived using a 2D/3D slice-to-volume registration to the volumes. The method is tested on the carpal joint because of its complexity and the small but complex motion of its compartments. For a first study a human cadaver hand was scanned and the method was evaluated with artificially generated slice images. Starting from random initial positions of about 5 mm translational and 12° rotational deviation, 70 to 90 % of the registrations converged successfully to a deviation better than 0.5 mm and 5°. First evaluations using real data from a cine MR were promising. The feasibility of the method was demonstrated. However we experienced difficulties with the segmentation of the cine MR images. We therefore plan to examine different parameters for the image acquisition in future studies.
Prospective evaluation of the clinical utility of laryngeal electromyography.
Ingle, John W; Young, VyVy N; Smith, Libby J; Munin, Micheal C; Rosen, Clark A
2014-12-01
To prospectively evaluate the clinical utility of laryngeal electromyography (LEMG) STUDY DESIGN: Prospective observational study. The study involved 50 consecutive patients referred for LEMG. Laryngologists initially indicated diagnoses and treatment plans under the assumption of no access to LEMG. Patients then underwent LEMG by blinded examiners. LEMG results were reviewed by each patient's laryngologist. Diagnoses and treatment plans were either maintained or altered based on the LEMG results. The diagnosis changed 10% (5/50) of the time and treatment plans were altered 36% (18/50) of the time based on information provided by LEMG. Observational periods were eliminated in 13/50 patients based on LEMG, moving them to permanent treatment. LEMG allowed the differentiation between joint fixation and bilateral paralysis in three patients. Previously unrecognized superior laryngeal neuropathies were identified in three patients. Laryngeal electromyography often provides clinically useful information that typically leads to a more accurate diagnosis and a more appropriate, expedited treatment plan. 2b. © 2014 The American Laryngological, Rhinological and Otological Society, Inc.
45 CFR 1614.2 - General policy.
Code of Federal Regulations, 2010 CFR
2010-10-01
... the joint venture plan must meet the following conditions: (1) The recipients involved in the joint... § 1614.6; (2) Each recipient in the joint venture must be a bona fide participant in the activities undertaken by the joint venture; and (3) The joint PAI venture must provide an opportunity for involving...
Go / NGO success ensures Vietnam project.
2000-02-01
This article reports the results of a joint evaluation by the Japanese Evaluation Team and the People's Committee of Nghe An on the Japan International Cooperation Agency Vietnam Reproductive Health (RH) Project. The evaluation, which was conducted through a workshop, showed that the Vietnam RH Project in Nghe An Province was successful. With two short-term experts dispatched to Vietnam in November and December 1999, the Project¿s activities were realized. Many activities were undertaken, which included retraining of community health centers, improvement of district health centers¿ monitoring capacity, and prenatal examination. Although the evaluation was carried out after only 2 years of actual activities, the Project¿s planned activities showed a smooth implementation as a result of good collaboration among Japan, the Vietnamese government, and nongovernmental organizations. With the successful outcome of the first phase of the project, both Japan and Vietnam have put up plans for future project activities.
Effects-Based Operations in the Cyber Domain
2017-05-03
as the joint targeting methodology . The description that Batschelet gave the traditional targeting methodology included a process of, “Decide, Detect...technology, requires new planning and methodology to fight back. This paper evaluates current Department of Defense doctrine to look at ways to conduct...developing its cyber tactics, techniques, and procedures, which, includes various targeting methodologies , such as the use of effects-based
ERIC Educational Resources Information Center
Martinez, Maria L., Comp.
A proposal is advanced to the Latin American nations by the Department of Educational Affairs, Organization of American States (OAS), for a joint program of enacting educational reform. As mediator, the OAS recommends as an initial step the distribution of various publications offering information on actual educational programs currently in…
ERIC Educational Resources Information Center
Markic, Silvija; Eilks, Ingo
2006-01-01
This paper discusses a project of Participatory Action Research (PAR) on lower secondary chemistry education. In this ongoing project, practicing teachers and university researchers in chemical education jointly carry out projects for developing and evaluating new lesson plans. The focus of the PAR group is to develop teaching/learning activities…
Iorio, Richard; Davis, Charles M; Healy, William L; Fehring, Thomas K; O'Connor, Mary I; York, Sally
2010-10-01
To evaluate the effects of the economic downturn on adult reconstruction surgery in the United States, a survey of the American Association of Hip and Knee Surgeons (AAHKS) membership was conducted. The survey evaluated surgical and patient volume, practice type, hospital relationship, total joint arthroplasty cost control, employee staffing, potential impact of Medicare reimbursement decreases, attitudes toward health care reform options and retirement planning. A surgical volume decrease was reported by 30.4%. An outpatient visit decrease was reported by 29.3%. A mean loss of 29.9% of retirement savings was reported. The planned retirement age increased to 65.3 years from 64.05 years. If Medicare surgeon reimbursement were to decrease up to 20%, 49% to 57% of AAHKS surgeons would be unable to provide care for Medicare patients, resulting in an unmet need of 92,650 to 160,818 total joint arthroplasty procedures among AAHKS surgeons alone. Decreases in funding for surgeons and inadequate support for subspecialty training will likely impact access and quality for Americans seeking adult reconstruction surgery. Copyright © 2010 Elsevier Inc. All rights reserved.
2008-10-30
American billionaire and financier Warren Buffett , “is the enemy of good thinking.”42 And there is “bad terminology” spilling from the pages of JP...be productive and become a meaningless catch-all word? 42 Warren Buffett , Berkshire Hathaway, 2001...Harrisburg, PA: The Telegraph Press (1940). Buffett , Warren . Berkshire Hathaway, 2001 Annual Report. Chairman of the Joint Chiefs of Staff. Joint
Romero-Gutierrez, Miguel; Jimenez-Liso, M Rut; Martinez-Chico, Maria
2016-02-01
This study shows the use of SWOT to analyse students' perceptions of an environmental education joint master's programme in order to determine if it runs as originally planned. The open answers given by students highlight the inter-university nature of the master's, the technological innovation used as major points, and the weaknesses in the management coordination or the duplicate contents as minor points. The external analysis is closely linked with the students' future jobs, their labour opportunities available to them after graduation. The innovative treatment of the data is exportable to the evaluation of programmes of other degrees because it allows the description linked to its characteristics and its design through the students' point of view. Copyright © 2015 Elsevier Ltd. All rights reserved.
2007-03-01
information dominance , Joint Network Operations (NETOPS) organizations need to be strategically aligned. As result, to enhance the capabilities-based effects of NETOPS and reduce our NETOP infrastructures susceptibility to compromise. Once the key organizations were identified, their strategic plans were analyzed using a structured content analysis framework. The results illustrated that the strategic plans were aligned with the community of interests tasking to conduct NETOPS. Further research is required into the strategic alignment beyond the strategic
1988-01-01
Under these Joint Decisions, all industrial establishments employing 300 or more workers are obliged to establish an in-plant health clinic and to provide contraceptive services to eligible worker couples. Under Joint Decree No. KEP.12/MEN/1984 of the Ministry of Manpower, the Indonesian Labor Federation and the Indonesian Employers Association agreed to step up their family planning efforts in the industrial sector with the cooperation of the National Family Planning Coordinating Board. full text
Federal Register 2010, 2011, 2012, 2013, 2014
2011-03-11
..., Consolidation and Dissemination of Quotation and Transaction Information for Nasdaq-Listed Securities Traded on... Exchange, Inc., Financial Industry Regulatory Authority, Inc., International Securities Exchange LLC...-Regulatory Organization Plan Governing the Collection, Consolidation, and Dissemination of Quotation and...
Evidence-based nursing leadership: Evaluation of a Joint Academic-Service Journal Club.
Duffy, Joanne R; Thompson, Diane; Hobbs, Terry; Niemeyer-Hackett, Nancy Lee; Elpers, Susan
2011-10-01
This article describes the importance of evidence-based nursing leadership in the development and evaluation of a joint academic-service nursing leadership journal club. The use of scientific evidence and the embracing of an environment of continuous learning are essential to quality practice; however, nursing leadership has been slow to apply evidence-based practice to their own work. A noontime monthly meeting schedule, incentivized by lunch, was organized as a nursing leadership journal club. Articles were selected and reviewed monthly, and the process was formally evaluated using a written evaluation at the end of year 1. Eighteen articles were appraised by the group with 6 topics identified. Positive results included increased knowledge, competence of the leader, and attainment of goals. Recommendations include revision of goals, plans to share leadership of the group, development of a rigorous evaluation of outcomes, and dissemination of findings. The journal club was valuable in increasing awareness of nursing leadership research, promoting leadership development, and improving competence in the performance of research appraisals. Process improvement and further study are needed to increase understanding regarding the benefits of leadership journal clubs.
Federal Register 2010, 2011, 2012, 2013, 2014
2010-03-22
... Advisory Committee; Notice of Meeting AGENCY: Research and Innovative Technology Administration, U.S... Plan; (5) Evolution of IntelliDrive\\SM\\; (6) ITS Strategic Research Plan, 2010-2014; (7) University... Technology Administration, ITS Joint Program Office, Attention: Stephen Glasscock, 1200 New Jersey Avenue, SE...
78 FR 66058 - Habitat Conservation Plan for South Sacramento County, California
Federal Register 2010, 2011, 2012, 2013, 2014
2013-11-04
... Connector Joint Powers Authority, the Sacramento Regional County Sanitation District, the Sacramento County Water Agency, and a South Sacramento Habitat Conservation Plan Joint Powers Authority) for activities... listed fish or wildlife is defined under the Act as to harass, harm, pursue, hunt, shoot, wound, kill...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-06-20
... Administration's Joint Strategic Plan for Intellectual Property Enforcement. The Strategy notes that the... transparent as possible. (The 2013 Joint Strategic Plan for Intellectual Property Enforcement is available at... particularly useful for measuring effectiveness of voluntary initiatives aimed at reducing infringement and...
Dutch Multidisciplinary Guideline for Invasive Treatment of Pain Syndromes of the Lumbosacral Spine.
Itz, Coen J; Willems, Paul C; Zeilstra, Dick J; Huygen, Frank J
2016-01-01
When conservative therapies such as pain medication or exercise therapy fail, invasive treatment may be indicated for patients with lumbosacral spinal pain. The Dutch Society of Anesthesiologists, in collaboration with the Dutch Orthopedic Association and the Dutch Neurosurgical Society, has taken the initiative to develop the guideline "Spinal low back pain," which describes the evidence regarding diagnostics and invasive treatment of the most common spinal low back pain syndromes, that is, facet joint pain, sacroiliac joint pain, coccygodynia, pain originating from the intervertebral disk, and failed back surgery syndrome. The aim of the guideline is to determine which invasive treatment intervention is preferred for each included pain syndrome when conservative treatment has failed. Diagnostic studies were evaluated using the EBRO criteria, and studies on therapies were evaluated with the Grading of Recommendations Assessment, Development and Evaluation system. For the evaluation of invasive treatment options, the guideline committee decided that the outcome measures of pain, function, and quality of life were most important. The definition, epidemiology, pathophysiological mechanism, diagnostics, and recommendations for invasive therapy for each of the spinal back pain syndromes are reported. The guideline committee concluded that the categorization of low back pain into merely specific or nonspecific gives insufficient insight into the low back pain problem and does not adequately reflect which therapy is effective for the underlying disorder of a pain syndrome. Based on the guideline "Spinal low back pain," facet joint pain, pain of the sacroiliac joint, and disk pain will be part of a planned nationwide cost-effectiveness study. © 2015 World Institute of Pain.
Sakai, K; Watanabe, A; Kogi, K
1993-01-01
The improvement of an irregular three-shift system with anti-clockwise rotation of workers of a disabled persons' facility covering 42 h a week was a subject for management-labour debate. Workers were complaining of physical fatigue, high prevalence of low back pain, sleep shortages associated with short inter-shift intervals, and irregular holidays. With the co-operation of trade union members, an educational and intervention programme was designed to analyse, plan, and implement improved shift rotation schemes. The programme consisted of (a) a group study on the existing system and effects on health and working life; (b) joint planning of potential schemes; (c) communication and feedback (d) testing and evaluation; and (e) agreement on an improved system. The group study was undertaken by means of time study, questionnaire and physiological methods, and the results were jointly discussed. This led to the planning of alternative shift schemes incorporating more regular, clockwise rotation. It was agreed to stage a trial period with a view to shorter working hours. This experience indicated the importance of a stepwise intervention strategy with frequent dialogues and a participatory process focusing on the broad range of working life and health issues.
Srivastava, Aradhana; Bhattacharyya, Sanghita; Gautham, Meenakshi; Schellenberg, Joanna; Avan, Bilal I
2016-12-01
Effective utilisation of collaborative non-governmental organisation (NGO)-public health system linkages in pluralistic health systems of developing countries can substantially improve equity and quality of services. This study explores level and types of linkages between public health sector and NGOs in Uttar Pradesh (UP), an underprivileged state of India, using a social science model for the first time. It also identifies gaps and challenges for effective linkage. Two NGOs were selected as case studies. Data collection included semi-structured in-depth interviews with senior staff and review of records and reporting formats. Formal linkages of NGOs with the public health system related to registration, participation in district level meetings, workforce linkages and sharing information on government-supported programmes. Challenges included limited data sharing, participation in planning and limited monitoring of regulatory compliances. Linkage between public health system and NGOs in UP was moderate, marked by frequent interaction and some reciprocity in information and resource flows, but weak participation in policy and planning. The type of linkage could be described as 'complementarity', entailing information and resource sharing but not joint action. Stronger linkage is required for sustained and systematic collaboration, with joint planning, implementation and evaluation.
2013-01-07
Contingency Operations Task Force, 2011, p. 4)...........................68 Figure 25. Original Organizational Makeup for the CASO (After Deputy...Workforce CAP Civilian Augmentation Program CAP Crisis Action Planning CASO Contingency Acquisition Support Office CBP Capability-Based...its inclusion in joint exercises; Identify and assign responsibilities to institutionalize OCS lesson development, analysis, documentation and use
Evaluating Courses of Actions at the Strategic Planning Level
2013-03-01
and statistical decision theory ( Schultz , Borrowman and Small 2011). Nowadays, it is hard to make a decision by ourselves. Modern organizations...Analysis." Lecture Slides, October 2011. Schultz , Martin T., Thomas D. Borrowman, and Mitchell J. Small. Bayesian Networks for Modeling Dredging...www.ukessays.com/essays/business/strategic-analysis-of-procter-and-gamble.php (accessed October 09, 2012). Vego, Milan . Joint Operational Warfare. Vol. Vol 1
Decision Support for Transportation Planning in Joint COA Development.
1996-06-01
COA generation is interwoven with COA evaluation. SOCAP demonstrates its ability to aid in feasibility estimation by producing output for the Dynamic...Analysis and Replanning Tool (DART) transportation feasibility estimator. The output of SOCAP is first used by an intermediate Force Module Enhancer...and Requirements Generator (FMERG), which elaborates the major force list produced by SOCAP in order to add supporting units and their transportation
Tire/runway friction interface
NASA Technical Reports Server (NTRS)
Yager, Thomas J.
1990-01-01
An overview is given of NASA Langley's tire/runway pavement interface studies. The National Tire Modeling Program, evaluation of new tire and landing gear designs, tire wear and friction tests, and tire hydroplaning studies are examined. The Aircraft Landing Dynamics Facility is described along with some ground friction measuring vehicles. The major goals and scope of several joint FAA/NASA programs are identified together with current status and plans.
Cost of Quality Evaluation Methodologies Handbook
1988-07-28
policy. 2. Use multiple vendors for major procurements. 3. Establish a formal vendor qualification process. 4. Conduct joint quality planning; agree...and from which extrapolations and inter- polations may be extracted for estimating purposes. COST OF QUALITY - The costs of all efforts expended to...PRODUCIBILITY - The relative ease of producing an item or system which is governed by the characteristics and features of a design that enable
Space Weather Forecasting at the Joint Space Operations Center (JSpOC)
NASA Astrophysics Data System (ADS)
Nava, O.
2012-12-01
The Joint Space Operations Center (JSpOC) at Vandenberg Air Force Base is the command and control focal point for the operational employment of worldwide joint space forces. The JSpOC focuses on planning and executing US Strategic Command's Joint Functional Component Command for Space (JFCC SPACE) mission. Through the JSpOC, the Weather Specialty Team (WST) monitors space and terrestrial weather effects, plans and assesses weather impacts on military operations, and provides reach-back support for deployed theater solar and terrestrial needs. This presentation will detail how space weather affects the JSpOC mission set and how the scientific community can enhance the WST's capabilities and effectiveness.
NASA Technical Reports Server (NTRS)
Lewis, Pattie
2005-01-01
Headquarters National Aeronautics and Space Administration (NASA) chartered the Acquisition Pollution Prevention (AP2) Office to coordinate agency activities affecting pollution prevention issues identified during system and component acquisition and sustainment processes. The primary objectives of the AP2 Office are to: (1) Reduce or eliminate the use of hazardous materials (HazMats) or hazardous processes at manufacturing, remanufacturing, and sustainment locations. (2) A void duplication of effort in actions required to reduce or eliminate HazMats through joint center cooperation and technology sharing. This project will identify, evaluate and approve alternative surface preparation technologies for use at NASA and Air Force Space Command (AFSPC) installations. Materials and processes will be evaluated with the goal of selecting those processes that will improve corrosion protection at critical systems, facilitate easier maintenance activity, extend maintenance cycles, eliminate flight hardware contamination and reduce the amount of hazardous waste generated. This Joint Test Protocol (JTP) contains the critical requirements and tests necessary to qualify alternative Low-Emission Surface Preparation/Depainting Technologies for Structural Steel Applications. These tests were derived from engineering, performance, and operational impact (supportability) requirements defined by a consensus of NASA and Air Force Space Command (AFSPC) participants. The Field Test Plan (FTP), entitled Joint Test Protocol for Validation of Alternative Low Emission Surface Preparation/Depainting Technologies for Structural Steel, prepared by ITB, defines the field evaluation and testing requirements for validating alternative surface preparation/depainting technologies and supplements the JTP.
Bell, Elizabeth; Ijaz, Kashef; Bartee, Maureen; Fernandez, Jose; Burris, Hannah; Sliter, Karen; Nikkari, Simo; Chungong, Stella; Rodier, Guenael; Jafari, Hamid
2017-01-01
The Joint External Evaluation (JEE), a consolidation of the World Health Organization (WHO) International Health Regulations 2005 (IHR 2005) Monitoring and Evaluation Framework and the Global Health Security Agenda country assessment tool, is an objective, voluntary, independent peer-to-peer multisectoral assessment of a country’s health security preparedness and response capacity across 19 IHR technical areas. WHO approved the standardized JEE tool in February 2016. The JEE process is wholly transparent; countries request a JEE and are encouraged to make its findings public. Donors (e.g., member states, public and private partners, and other public health institutions) can support countries in addressing identified JEE gaps, and implementing country-led national action plans for health security. Through July 2017, 52 JEEs were completed, and 25 more countries were scheduled across WHO’s 6 regions. JEEs facilitate progress toward IHR 2005 implementation, thereby building trust and mutual accountability among countries to detect and respond to public health threats. PMID:29155678
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fan, J; Fan, J; Hu, W
Purpose: To develop a fast automatic algorithm based on the two dimensional kernel density estimation (2D KDE) to predict the dose-volume histogram (DVH) which can be employed for the investigation of radiotherapy quality assurance and automatic treatment planning. Methods: We propose a machine learning method that uses previous treatment plans to predict the DVH. The key to the approach is the framing of DVH in a probabilistic setting. The training consists of estimating, from the patients in the training set, the joint probability distribution of the dose and the predictive features. The joint distribution provides an estimation of the conditionalmore » probability of the dose given the values of the predictive features. For the new patient, the prediction consists of estimating the distribution of the predictive features and marginalizing the conditional probability from the training over this. Integrating the resulting probability distribution for the dose yields an estimation of the DVH. The 2D KDE is implemented to predict the joint probability distribution of the training set and the distribution of the predictive features for the new patient. Two variables, including the signed minimal distance from each OAR (organs at risk) voxel to the target boundary and its opening angle with respect to the origin of voxel coordinate, are considered as the predictive features to represent the OAR-target spatial relationship. The feasibility of our method has been demonstrated with the rectum, breast and head-and-neck cancer cases by comparing the predicted DVHs with the planned ones. Results: The consistent result has been found between these two DVHs for each cancer and the average of relative point-wise differences is about 5% within the clinical acceptable extent. Conclusion: According to the result of this study, our method can be used to predict the clinical acceptable DVH and has ability to evaluate the quality and consistency of the treatment planning.« less
76 FR 23994 - Gulf of Mexico Fishery Management Council; Public Meetings; Correction
Federal Register 2010, 2011, 2012, 2013, 2014
2011-04-29
... Atlantic and Gulf of Mexico; Joint Amendment 10 to the Spiny Lobster Fishery Management Plan for the Gulf... Lobster Public hearings will be held on Joint Amendment 10 to the Spiny Lobster Fishery Management Plan... Accountability Measures for Caribbean spiny lobster as required by the Magnuson-Stevens Act. This amendment...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-05-24
... in implementing the New Mexico Air Quality Control Act, the joint Air Quality Control Board (AQCB... Department in implementing the New Mexico Air Quality Control Act, the joint Air Quality Control Board (AQCB... Promulgation of Implementation Plans; New Mexico; Albuquerque/Bernalillo County; Fees for Permits and...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-06-26
... OFFICE OF MANAGEMENT AND BUDGET Development of the Joint Strategic Plan on Intellectual Property Enforcement; Request of the U.S. Intellectual Property Enforcement Coordinator for Public Comments AGENCY: Office of the U.S. Intellectual Property Enforcement Coordinator, Executive Office of the President...
NASA Astrophysics Data System (ADS)
Jarvis, Tina; Hargreaves, Linda; Comber, Chris
1997-06-01
This project evaluated the effect of collaboration via email links on the quality of 10-11 year old students’ science investigative skills in six primary rural schools. After a joint planning meeting, sixty children collected, identified and shared information via email about moths in their area, in order to produce a joint booklet. All email traffic was monitored throughout the project. Indepth structured observations and interviews were carried out at the schools. Children completed daily diaries. The children demonstrated a variety of science skills, particularly observation and recording. Their competence and confidence in using computers, handling email and in manipulating a data base developed during the project. The project identified a number of important issues relating to teacher inservice training requirements, the importance of a suitable progression of IT experiences throughout the school, development in cooperative groupwork for children, and software design.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lynn, R.Y.S.; Bolmarcich, J.J.
The purpose of this Memorandum is to propose a prototype procedure which the Office of Munitions might employ to exercise, in a supportive joint fashion, two of its High Level Conventional Munitions Models, namely, the OSD Threat Methodology and the Joint Munitions Assessment and Planning (JMAP) model. The joint application of JMAP and the OSD Threat Methodology provides a tool to optimize munitions stockpiles. The remainder of this Memorandum comprises five parts. The first is a description of the structure and use of the OSD Threat Methodology. The second is a description of JMAP and its use. The third discussesmore » the concept of the joint application of JMAP and OSD Threat Methodology. The fourth displays sample output of the joint application. The fifth is a summary and epilogue. Finally, three appendices contain details of the formulation, data, and computer code.« less
SouthWest Elevation, Plan Showing Deck Framing, Deck Plan, Plan of ...
South-West Elevation, Plan Showing Deck Framing, Deck Plan, Plan of Collar Beams, Etc., Typical Framing Details, End Elevations, Elevation of Scarf Top Chord, Joint Details - Perrine's Bridge, Spanning Wallkill River, Rifton, Ulster County, NY
A Qualitative Piloted Evaluation of the Tupolev Tu-144 Supersonic Transport
NASA Technical Reports Server (NTRS)
Rivers, Robert A.; Jackson, E. Bruce; Fullerton, C. Gordon; Cox, Timothy H.; Princen, Norman H.
2000-01-01
Two U.S. research pilots evaluated the Tupolev Tu-144 supersonic transport aircraft on three dedicated flights: one subsonic and two supersonic profiles. The flight profiles and maneuvers were developed jointly by Tupolev and U.S. engineers. The vehicle was found to have unique operational and flight characteristics that serve as lessons for designers of future supersonic transport aircraft. Vehicle subsystems and observed characteristics are described as are flight test planning and ground monitoring facilities. Maneuver descriptions and extended pilot narratives for each flight are included as appendices.
Satellite Power System (SPS) FY 79 program summary
NASA Technical Reports Server (NTRS)
1980-01-01
The Satellite Power System (SPS) program a joint effort to develop an initial understanding of the technical feasibility, the economic practicality, and the social and environmental acceptability of the SPS concept is discussed. This is being accomplished through implementation of the Concept Development and Evaluation Program Plan which is scheduled for completion by the end of FY 1980. This Program Summary not only covers FY 1979 but includes work completed in FY 1977 and FY 1978 in order to give a comprehensive picture of the DOE involvement in the SPS concept development and evaluation process.
Aircraft radial-belted tire evaluation
NASA Technical Reports Server (NTRS)
Yager, Thomas J.; Stubbs, Sandy M.; Davis, Pamela A.
1990-01-01
An overview is given of the ongoing joint NASA/FAA/Industry Surface Traction And Radial Tire (START) Program being conducted at NASA Langley's Aircraft Landing Dynamics Facility (ALDF). The START Program involves tests using three different tire sizes to evaluate tire rolling resistance, braking, and cornering performance throughout the aircraft ground operational speed range for both dry and wet runway surfaces. Preliminary results from recent 40 x 14 size bias-ply, radial-belted, and H-type aircraft tire tests are discussed. The paper concludes with a summary of the current program status and planned ALDF test schedule.
Ohio Route 50 joint sealant experiment : research implementation plan.
DOT National Transportation Integrated Search
2005-05-01
Research in the state of Wisconsin over the past forty years has found no noticeable difference in : performance between jointed concrete pavement (JCP) constructed with a sealed contraction joint and : JCP constructed with a single, narrow, unsealed...
Ground test article for deployable space structure systems
NASA Technical Reports Server (NTRS)
Malloy, G. D.
1984-01-01
The ground test article fabrication and assembly plan was completed by Santek Engineering, Inc. The plan was reviewed and accepted by Rockwell during an on-site visit to the Santek facility. Raw material and hardware orders were placed by Santek in July. Approximately 98% of the raw materials and 10% of the hardware deliveries have been completed. Several material and hardware substitutions were requested by Santek due to no-bid responses from suppliers or excessive costs for limited quantity items. These substitutions were evaluated and approved by Rockwell Engineering and Material and Process and are being incorporated into the drawing package. Santek started fabrication of detail parts in mid-August. Their current resource utilization is at approximately 50% of the planned eventual commitment and is increasing at a rate commensurate with the fabrication and assembly plan. At this writing, Santek's estimate of completion is 03%. During verification testing of the diagonal member joint, in a program funded by Rockwell discretionary funds, the axial load to unlock the joint was found to increase significantly after a few cycles of operation. This was attributed to galling, poor lubrication, and locking pin geometry. A change of materials, lubricant, and modification of the pin geometry reduced the unlocking load and provided repeatability after 50 cycles of operation. This new design is being implemented into the ground test article.
NASA Astrophysics Data System (ADS)
Wang, Mingming; Luo, Jianjun; Fang, Jing; Yuan, Jianping
2018-03-01
The existence of the path dependent dynamic singularities limits the volume of available workspace of free-floating space robot and induces enormous joint velocities when such singularities are met. In order to overcome this demerit, this paper presents an optimal joint trajectory planning method using forward kinematics equations of free-floating space robot, while joint motion laws are delineated with application of the concept of reaction null-space. Bézier curve, in conjunction with the null-space column vectors, are applied to describe the joint trajectories. Considering the forward kinematics equations of the free-floating space robot, the trajectory planning issue is consequently transferred to an optimization issue while the control points to construct the Bézier curve are the design variables. A constrained differential evolution (DE) scheme with premature handling strategy is implemented to find the optimal solution of the design variables while specific objectives and imposed constraints are satisfied. Differ from traditional methods, we synthesize null-space and specialized curve to provide a novel viewpoint for trajectory planning of free-floating space robot. Simulation results are presented for trajectory planning of 7 degree-of-freedom (DOF) kinematically redundant manipulator mounted on a free-floating spacecraft and demonstrate the feasibility and effectiveness of the proposed method.
ERIC Educational Resources Information Center
Saraf, S. N.
The Functional Literacy Project of India was initiated in 1967 as part of a joint program, involving several Indian government ministries and United Nations agencies, to train some five million farm families in both literacy and modern agricultural skills at the same time. This report first describes the beginnings of the project and its…
Multi-Metric Sustainability Analysis
DOE Office of Scientific and Technical Information (OSTI.GOV)
Cowlin, Shannon; Heimiller, Donna; Macknick, Jordan
2014-12-01
A readily accessible framework that allows for evaluating impacts and comparing tradeoffs among factors in energy policy, expansion planning, and investment decision making is lacking. Recognizing this, the Joint Institute for Strategic Energy Analysis (JISEA) funded an exploration of multi-metric sustainability analysis (MMSA) to provide energy decision makers with a means to make more comprehensive comparisons of energy technologies. The resulting MMSA tool lets decision makers simultaneously compare technologies and potential deployment locations.
Training Community Modeling and Simulation Business Plan: 2008 Edition
2009-12-01
Collaborative information environment. Collaborative tools will help CCDRs and joint staffs plan and disseminate operations, link the staffs to subject matter...anticipating direct and indirect effects as they propagate through political, military, economic, sociological, and information infrastructures. Capabilities...will also 5-11 enhance training for joint staffs and task forces; crisis management; JUO; information warfare; interagency, intergovernmental, and
ERIC Educational Resources Information Center
Concordia Coll., St. Paul, Minn.
The Teacher Education Model of Partnership (TEMP) features joint ownership, joint support, and a partner relationship between a college and a school district in planning and implementing a professional program, designed specifically for teaching in the urban classroom. A planning committee was formed, composed of representatives from the public…
Race-Neutral Campuses in Urban Areas: A Follow-Up Report on Merger and Joint Planning.
ERIC Educational Resources Information Center
Godard, James M.
Developments during the 1980-81 academic year concerning mergers/joint planning projects designed to eliminate unnecessary duplication of programs between historically black and white colleges in Nashville, Tennessee; Savannah, Georgia; and Norfolk, Virginia are examined. Site visits were made during the second year of operation of the programs at…
Total hip arthroplasty in dwarfism. A case report.
De Fine, Marcello; Traina, Francesco; Palmonari, Massimo; Tassinari, Enrico; Toni, Aldo
2008-05-01
In dwarfism hip arthritis, usually secondary to hip dysplasia, is a common finding at an early age. In these patients a joint replacement is a demanding procedure due to the peculiar joint deformity and the small size of the bones. We present a case of a bilateral hip replacement in a dwarf patient. In order to reduce intraoperative complications and improve the joint kinematics a thorough preoperative planning was performed by a CT based computerised system. On the basis of the planning we chose a conical shaped stem that enable as to restore limb length and offset with a low risk of femoral fracture. In conclusion, we consider total hip replacement in dwarfism a safe and effective procedure if an accurate preoperative planning is performed.
2009-12-31
Status and Assessment data interfaces leverage the TBONE Services and data model. The services and supporting Java 2 Platform Enterprise Edition (J2EE...existing Java ™ and .Net developed “Fat Clients.” The IOPC-X design includes an Open Services Gateway Initiative (OSGi) compliant plug-in...J2EE Java 2 Platform Enterprise Edition JAOP Joint Air Operations Plan JAST JAOP AOD Status Tool JFACC Joint Forces Air Component Commander Data
40 CFR 300.205 - Planning and coordination structure.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 40 Protection of Environment 29 2013-07-01 2013-07-01 false Planning and coordination structure... POLLUTION CONTINGENCY PLAN Planning and Preparedness § 300.205 Planning and coordination structure. (a... assure pre-planning of joint response efforts, including appropriate procedures for mechanical recovery...
40 CFR 300.205 - Planning and coordination structure.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 40 Protection of Environment 28 2014-07-01 2014-07-01 false Planning and coordination structure... POLLUTION CONTINGENCY PLAN Planning and Preparedness § 300.205 Planning and coordination structure. (a... assure pre-planning of joint response efforts, including appropriate procedures for mechanical recovery...
40 CFR 300.205 - Planning and coordination structure.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 40 Protection of Environment 28 2011-07-01 2011-07-01 false Planning and coordination structure... POLLUTION CONTINGENCY PLAN Planning and Preparedness § 300.205 Planning and coordination structure. (a... assure pre-planning of joint response efforts, including appropriate procedures for mechanical recovery...
40 CFR 300.205 - Planning and coordination structure.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 40 Protection of Environment 29 2012-07-01 2012-07-01 false Planning and coordination structure... POLLUTION CONTINGENCY PLAN Planning and Preparedness § 300.205 Planning and coordination structure. (a... assure pre-planning of joint response efforts, including appropriate procedures for mechanical recovery...
Technical Evaluation Motor 3 (TEM-3)
NASA Technical Reports Server (NTRS)
Garecht, Diane
1989-01-01
A primary objective of the technical evaluation motor program is to recover the case, igniter and nozzle hardware for use on the redesigned solid rocket motor flight program. Two qualification objectives were addressed and met on TEM-3. The Nylok thread locking device of the 1U100269-03 leak check port plug and the 1U52295-04 safe and arm utilizing Krytox grease on the barrier-booster shaft O-rings were both certified. All inspection and instrumentation data indicate that the TEM-3 static test firing conducted 23 May 1989 was successful. The test was conducted at ambient conditions with the exception of the field joints (set point of 121 F, with a minimum of 87 F at the sensors), igniter joint (set point at 122 F with a minimum of 87 F at sensors) and case-to-nozzle joint (set point at 114 F with a minimum of 87 F at sensors). Ballistics performance values were within specification requirements. Nozzle performance was nominal with typical erosion. The nozzle and the case joint temperatures were maintained at the heaters controlling set points while electrical power was supplied. The water and the CO2 quench systems prevented damage to the metal hardware. All other test equipment performed as planned, contributing to a successful motor firing. All indications are that the test was a success, and all expected hardware will be refurbished for the RSRM program.
United States Military Posture for FY 1987
1987-01-01
monitor, plan, and execute mobilization, deployment, employment, and sustainment during peace, crisis, and war. JOPES requirements are being developed ...positioning 68 Deployment Management 69 VI Sustainability 69 Ammunition 69 Petroleum, Oils, and Lubricants 69 Military Construction 69...Commanders in Chiefs 73 Joint Doctrine 73 Combined Doctrine 74 Joint Force Development Process 74 Joint Resource Assessment 75 Joint Program
Validation Report for Joint Medical Planning Tool (JMPT) Version 7.5.6 Medical Planning Tool
2013-09-19
surgical 847.3 Sprain of sacrum Non-surgical 724.2 Lumbago Non-surgical 724.02 Spinal stenosis of lumbar region Non-surgical 681 Cellulitis and abscess... Cellulitis and abscess of face 682.6 Cellulitis and abscess of leg except foot 719.41 Pain in joint shoulder 11 JMPT Validation Report ICD-9 ICD-9
NASA Technical Reports Server (NTRS)
1976-01-01
Specific products and functions, and associated facility availability, applicable to preflight planning of flight operations were studied. Training and simulation activities involving joint participation of STS and payload operations organizations, are defined. The prelaunch activities required to prepare for the payload flight operations are emphasized.
2017-06-09
structures constantly arise in firefights and skirmishes on the battlefield. Source: Andrew Ilachinski, Artificial War: Multiagent- Based Simulation of...Alternative Methods of Analysis and Innovative Organizational Structures .” Conference, Rome, Italy March 31-April 2. ...Intelligence Analysis, Joint Operational Planning, Cellular Automata, Agent- Based Modeling 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT 18
Space shuttle Production Verification Motor 1 (PV-1) static fire
NASA Technical Reports Server (NTRS)
1989-01-01
All inspection and instrumentation data indicate that the PV-1 static test firing conducted 18 Aug. 1988 was successful. With the exception of the intentionally flawed joints and static test modifications, PV-1 was flight configuration. Fail-safe flaws guaranteeing pressure to test the sealing capability of primary O-rings were included in the aft field joint, case-to-nozzle joint, and nozzle internal Joint 5. The test was conducted at ambient conditions, with the exception of the field joints and case/nozzle joints which were maintained at a minimum of 75 F. Ballistics performance values were within specification requirements. The PV-1 motor exhibited chamber pressure oscillations similar to previously tested Space Shuttle redesigned solid rocket motors, particularly QM-7. The first longitudinal mode oscillations experienced by PV-1 were the strongest ever measured in a Space Shuttle motor. Investigation into this observation is being conducted. Joint insulation performed as designed with no evidence of gas flow within unflawed forward field joints. The intentionally flawed center and aft case field joint insulation performance was excellent. There was no evidence of hot gas past the center field joint capture feature O-ring, the case-to-nozzle joint primary O-ring, or the aft field joint primary O-ring. O-ring seals and barriers with assured pressure at the flaws showed erosion and heat effect, but all sealed against passage of hot gases with the exception of the aft field joint capture feature O-ring. There was no evidence of erosion, heat effect, or blowby on any O-ring seals or barriers at the unflawed joints. Nozzle performance was nominal with typical erosion. Post-test examination revealed that the forward nose ring was of the old high performance motor design configuration with the 150-deg ply angle. All nozzle components remained intact for post-test evaluation. The thrust vector control system operated correctly. The water deluge system, CO2 quench, and other test equipment performed as planned during all required test operations.
22 CFR 126.14 - Special comprehensive export authorizations for NATO, Australia, and Japan.
Code of Federal Regulations, 2010 CFR
2010-04-01
... an acquisition, teaming arrangement, merger, joint venture authorization. With respect to NATO member.... exporter's consideration of entering into a teaming arrangement, joint venture, merger, acquisition, or... information concerning the arrangement, joint venture, merger or acquisition, including any planned exports of...
1992-10-01
intelligence developed an authentic European conflict scenario based on WINTEX- CIMEX , a detailed European command post exercise. One of the primary...them. The only exercises in which we effectively train from start to finish are the large CPXs like WINTEX/ CIMEX . This exercise is a procedural...general war CPX, sponsored by the Joint Chiefs of Staff. WINTEX/ CIMEX exercises. tests, and evaluates command and control procedures. planning. and
Improving Joint Function Using Photochemical Hydrogels for Articular Surface Repair
2012-10-01
with thrombin previously has been reported as a favorable scaffold for cartilage formation by encapsulated chondrocytes [10]. Studies over the past...during the photochemical crosslinking process. A full scale study is planned for the first quarter of year 3 to evaluate the fully formed cartilage ...Perform initial study of collagen and PEG gels with stem cells implanted in mice Bone marrow MSCs were harvested from donor swine and grown in culture
Joint Exercise Program: DOD Needs to Take Steps to Improve the Quality of Funding Data
2017-02-01
technology systems—the Joint Training Information Management System (JTIMS) and the Execution Management System—to manage the execution of the Joint...Exercise Program, but does not have assurance that funding execution data in the Execution Management System are reliable. JTIMS is the system of record...for the Joint Exercise Program that combatant commanders use to plan and manage their joint training exercises. GAO observed significant variation
[Juvenile rheumatoid diseases: Endoprosthetic care of destroyed hip joints].
Rehart, S; Henniger, M
2015-07-01
Patients with juvenile idiopathic arthritis (JIA) often suffer from involvement of the hip joints, with joint destruction and related functional limitations, making hip replacement necessary. To discover what special features are to be expected in patients with JIA and hip arthroplasty and what impact they have on surgical indication, choice of implant, and technique. Selective literature review and evaluation of our patient population. Compared with osteoarthritis patients, JIA patients are on average much younger at the time of hip replacement. Owing to the onset of the disease in childhood or adolescence and the frequent glucocorticoid therapy, growth disorders or abnormal anatomical findings are common in these patients. Bone density is often reduced at an early age. The perioperative management of medication has to be planned. Special implants for patients with rheumatic diseases do not exist, but the above peculiarities of this group of patients should be considered for surgical procedure and choice of implant and material. Overall, the results of hip arthroplasty in juvenile rheumatic diseases, in terms of pain relief and functional improvement, are good. The limited life of the arthroplasty is problematic. By relieving pain, improvement of the range of motion and activity level very high patient satisfaction is usually achieved by hip arthroplasty in JIA patients. In the case of involvement of the contralateral hip or the ipsilateral knee joint it may be useful to perform a simultaneous, single-stage joint replacement of both joints.
Charles R. Blinn; Michael A. Thompson
1996-01-01
Contains a variety of papers presented at the joint meeting of the Council on Forest Engineering and International Union of Forest Research Organizations Subject Group S3.04 and that support the meeting theme "Planning and Implementing Forest Operations to Achieve Sustainable Forests."
Command and Control for Joint Air Operations
2010-01-12
systems, to include collaborative air planning tools such as the theater battle management core system ( TBMCS ). Operational level air planning occurs in...sight communications and data exchange equipment in order to respond to joint force requirements. For example, the TBMCS is often used. The use of ATO...generation and dissemination software portions of TBMCS has been standardized. This ATO feature allows the JAOC to be interoperable with other
Federal Radionavigation Plan. Volume I. Radionavigation Plans and Policy.
DOT National Transportation Integrated Search
1980-01-01
The Federal Radionavigation Plan (FRP) has been jointly developed by the U.S. Departments of Defense and Transportation to ensure efficient use of resources and full protection of national interests. The plan sets forth the Federal interagency approa...
On the Development of Fuel-Free Power Supply Sources on Pneumatic Energy Conversion Principles
NASA Astrophysics Data System (ADS)
Son, E. E.; Nikolaev, V. G.; Kudryashov, Yu. I.; Nikolaev, V. V.
2017-12-01
The article is devoted to the evaluation of capabilities and problems of creation of fuel-free power supply of isolated and autonomous Russian consumers of low (up to several hundreds kW) power based on the joint use of wind power plants and progressive systems of pneumatic accumulation and conversion of energy. The basic and functional schemes and component structure of the system prototype are developed and proposed, the evaluations of the expected technical and economic indicators of system are presented, and the ways of its further practical implementation are planned.
Trajectory planning of free-floating space robot using Particle Swarm Optimization (PSO)
NASA Astrophysics Data System (ADS)
Wang, Mingming; Luo, Jianjun; Walter, Ulrich
2015-07-01
This paper investigates the application of Particle Swarm Optimization (PSO) strategy to trajectory planning of the kinematically redundant space robot in free-floating mode. Due to the path dependent dynamic singularities, the volume of available workspace of the space robot is limited and enormous joint velocities are required when such singularities are met. In order to overcome this effect, the direct kinematics equations in conjunction with PSO are employed for trajectory planning of free-floating space robot. The joint trajectories are parametrized with the Bézier curve to simplify the calculation. Constrained PSO scheme with adaptive inertia weight is implemented to find the optimal solution of joint trajectories while specific objectives and imposed constraints are satisfied. The proposed method is not sensitive to the singularity issue due to the application of forward kinematic equations. Simulation results are presented for trajectory planning of 7 degree-of-freedom (DOF) redundant manipulator mounted on a free-floating spacecraft and demonstrate the effectiveness of the proposed method.
Tiusanen, Hannu; Sarantsin, Pjotor; Stenholm, Miika; Mattie, Ryan; Saltychev, Mikhail
2016-07-01
To evaluate the trajectory of the change in range of motion after reverse shoulder joint replacement during 3-year follow-up among patients with rheumatoid arthritis. Retrospective cohort longitudinal study of 76 shoulder replacements performed in a university clinic. The range of shoulder motion was assessed by a physiotherapist using a manual goniometer with 5-degree precision before the surgery and 1, 3, 6, 12, and 36 months postoperatively. The shapes of the regression curves suggest that the improvement or decline observed in joint motion was happening mostly during the first year after surgery. After 1 year, the trajectories become flat and they remained unchanged until the end of follow-up. After shoulder joint replacement, the range of shoulder motion showed substantial changes during the first year only. This should be taken into account when scheduling control visits, planning rehabilitation, and predicting the use of community services after the surgery.
Borschmann, Rohan; Barrett, Barbara; Hellier, Jennifer M; Byford, Sarah; Henderson, Claire; Rose, Diana; Slade, Mike; Sutherby, Kim; Szmukler, George; Thornicroft, Graham; Hogg, Joanna; Moran, Paul
2013-05-01
People with borderline personality disorder frequently experience crises. To date, no randomised controlled trials (RCTs) of crisis interventions for this population have been published. To examine the feasibility of recruiting and retaining adults with borderline personality disorder to a pilot RCT investigating the potential efficacy and cost-effectiveness of using a joint crisis plan. An RCT of joint crisis plans for community-dwelling adults with borderline personality disorder (trial registration: ISRCTN12440268). The primary outcome measure was the occurrence of self-harming behaviour over the 6-month period following randomisation. Secondary outcomes included depression, anxiety, engagement and satisfaction with services, quality of life, well-being and cost-effectiveness. In total, 88 adults out of the 133 referred were eligible and were randomised to receive a joint crisis plan in addition to treatment as usual (TAU; n = 46) or TAU alone (n = 42). This represented approximately 75% of our target sample size and follow-up data were collected on 73 (83.0%) participants. Intention-to-treat analysis revealed no significant differences in the proportion of participants who reported self-harming (odds ratio (OR) = 1.9, 95% CI 0.53-6.5, P = 0.33) or the frequency of self-harming behaviour (rate ratio (RR) = 0.74, 95% CI 0.34-1.63, P = 0.46) between the two groups at follow-up. No significant differences were observed between the two groups on any of the secondary outcome measures or costs. It is feasible to recruit and retain people with borderline personality disorder to a trial of joint crisis plans and the intervention appears to have high face validity with this population. However, we found no evidence of clinical efficacy in this feasibility study.
Neural correlates of learning and trajectory planning in the posterior parietal cortex
Torres, Elizabeth B.; Quian Quiroga, Rodrigo; Cui, He; Buneo, Christopher A.
2013-01-01
The posterior parietal cortex (PPC) is thought to play an important role in the planning of visually-guided reaching movements. However, the relative roles of the various subdivisions of the PPC in this function are still poorly understood. For example, studies of dorsal area 5 point to a representation of reaches in both extrinsic (endpoint) and intrinsic (joint or muscle) coordinates, as evidenced by partial changes in preferred directions and positional discharge with changes in arm posture. In contrast, recent findings suggest that the adjacent medial intraparietal area (MIP) is involved in more abstract representations, e.g., encoding reach target in visual coordinates. Such a representation is suitable for planning reach trajectories involving shortest distance paths to targets straight ahead. However, it is currently unclear how MIP contributes to the planning of other types of trajectories, including those with various degrees of curvature. Such curved trajectories recruit different joint excursions and might help us address whether their representation in the PPC is purely in extrinsic coordinates or in intrinsic ones as well. Here we investigated the role of the PPC in these processes during an obstacle avoidance task for which the animals had not been explicitly trained. We found that PPC planning activity was predictive of both the spatial and temporal aspects of upcoming trajectories. The same PPC neurons predicted the upcoming trajectory in both endpoint and joint coordinates. The predictive power of these neurons remained stable and accurate despite concomitant motor learning across task conditions. These findings suggest the role of the PPC can be extended from specifying abstract movement goals to expressing these plans as corresponding trajectories in both endpoint and joint coordinates. Thus, the PPC appears to contribute to reach planning and approach-avoidance arm motions at multiple levels of representation. PMID:23730275
Increasing the marketability and recognition of provider network joint ventures.
Sjobeck, S J
1998-08-01
Physicians have been developing provider network joint ventures to market their services jointly to managed care plans, employers, and other purchasers. Over the past few years, external market factors have produced a growing impact on these joint ventures. These external market factors include the Federal government's revised antitrust guidelines, National Committee for Quality Assurance activities, and state and Federal consumer protection laws. Simply responding to these forces may not increase a provider network's marketability unless the network can demonstrate its value in the terms and measurements accepted by the consumer, managed care plans, and provider networks. By doing so, a provider network can not only increase its marketability, but also increase its recognition in the market, improve its competitive advantage, and enhance its return on investment.
Federal Radionavigation Plan. Vol. 1. Radionavigation Plans and Policy.
DOT National Transportation Integrated Search
1982-03-01
The second edition of the Federal Radionavigation Plan (FRP) has been jointly developed by the U.S. Departments of Defense and Transportation to ensure efficient use of resources and full protection of national interests. The plan sets forth the Fede...
Laredo District Coahuila/Nuevo Leon/Tamaulipas border master plan : executive summary.
DOT National Transportation Integrated Search
2012-06-01
Border Master Plans, as defined and supported by the U.S./Mexico Joint Working : Committee on Transportation Planning and Programming, the Federal Highway Administration, : and the U.S. Department of State, are comprehensive long range plans to inven...
Devesa, V; Rovesti, G L; Urrutia, P G; Sanroman, F; Rodriguez-Quiros, J
2015-06-01
The objective of this study was to evaluate technical feasibility and efficacy of a joint distraction technique by traction stirrup to facilitate shoulder arthroscopy and assess potential soft tissue damage. Twenty shoulders were evaluated radiographically before distraction. Distraction was applied with loads from 40 N up to 200 N, in 40 N increments, and the joint space was recorded at each step by radiographic images. The effects of joint flexion and intra-articular air injection at maximum load were evaluated. Radiographic evaluation was performed after distraction to evaluate ensuing joint laxity. Joint distraction by traction stirrup technique produces a significant increase in the joint space; an increase in joint laxity could not be inferred by standard and stress radiographs. However, further clinical studies are required to evaluate potential neurovascular complications. A wider joint space may be useful to facilitate arthroscopy, reducing the likelihood for iatrogenic damage to intra-articular structures. Copyright © 2015 Elsevier Ltd. All rights reserved.
Spacecraft environmental interactions: A joint Air Force and NASA research and technology program
NASA Technical Reports Server (NTRS)
Pike, C. P.; Purvis, C. K.; Hudson, W. R.
1985-01-01
A joint Air Force/NASA comprehensive research and technology program on spacecraft environmental interactions to develop technology to control interactions between large spacecraft systems and the charged-particle environment of space is described. This technology will support NASA/Department of Defense operations of the shuttle/IUS, shuttle/Centaur, and the force application and surveillance and detection missions, planning for transatmospheric vehicles and the NASA space station, and the AFSC military space system technology model. The program consists of combined contractual and in-house efforts aimed at understanding spacecraft environmental interaction phenomena and relating results of ground-based tests to space conditions. A concerted effort is being made to identify project-related environmental interactions of concern. The basic properties of materials are being investigated to develop or modify the materials as needed. A group simulation investigation is evaluating basic plasma interaction phenomena to provide inputs to the analytical modeling investigation. Systems performance is being evaluated by both groundbased tests and analysis.
A New Technique for Compensating Joint Limits in a Robot Manipulator
NASA Technical Reports Server (NTRS)
Litt, Jonathan; Hickman, Andre; Guo, Ten-Huei
1996-01-01
A new robust, optimal, adaptive technique for compensating rate and position limits in the joints of a six degree-of-freedom elbow manipulator is presented. In this new algorithm, the unmet demand as a result of actuator saturation is redistributed among the remaining unsaturated joints. The scheme is used to compensate for inadequate path planning, problems such as joint limiting, joint freezing, or even obstacle avoidance, where a desired position and orientation are not attainable due to an unrealizable joint command. Once a joint encounters a limit, supplemental commands are sent to other joints to best track, according to a selected criterion, the desired trajectory.
ERIC Educational Resources Information Center
Asian Cultural Centre for UNESCO, Tokyo (Japan).
This document reports on the 1991 Planning Meeting on Asian/Pacific Joint Production (AJP) Program of Materials for Neo-Literates in Rural Areas, the purpose of which was to discuss Asian Cultural Center for Unesco (ACCU) literacy programs to be carried out under regional cooperation. Opening addresses focused on the success of the cooperative…
ONR Tidal Flats DRI: Planning Joint Modeling and Field Exercises
2007-01-01
ONR Tidal Flats DRI: Planning Joint Modeling and Field Exercises Lyle Hibler Battelle/Marine Research Operations 1529 West Sequim Bay Road...West Sequim Bay Road Sequim , WA 98382 Phone: (360) 681-4591 Fax: (360) 681-4598 Email: adam.maxwell@pnl.gov Award Number: N000140710694...PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Battelle/Marine Research Operations,1529 West Sequim Bay Road, Sequim ,WA,98382 8. PERFORMING ORGANIZATION
A Review of Strategic Mobility Models and Analysis
1991-01-01
Logistics Directorate of the Joint Staff, (JS-J-4) specifically by the Studies , Concepts, and Analysis Division (SCAD), which conducts long-range...their analysis objec- tives. This study was designed to assist the Logistics Directorate of the Joint Staff (JS/J-4) to understand and improve the...This study concentrated on resource planning, which is the type of planning performed by the Logistics Directorate’s Studies , Concepts, and Analysis
1994 Federal Radionavigation Plan
DOT National Transportation Integrated Search
1995-05-01
The Federal Radionavigation Plan (FRP) delineates policies and plans for radionavigation services provided by the U.S. Government : to ensure efficient use of resources and full protection of national interests. Developed jointly by the U.S. Departme...
1996 Federal radionavigation plan
DOT National Transportation Integrated Search
1997-07-01
The Federal Radionavigation Plan (FRP) delineates policies and plans for radionavigation services provided by the U.S. Government : to ensure efficient use of resources and full protection of national interests. Developed jointly by the U.S. Departme...
1994 Federal Radionavigation Plan
DOT National Transportation Integrated Search
1995-05-01
The Federal Radionavigation Plan (FRP) delineates policies and plans for radionavigation services provided by the U.S. Government to ensure efficient use of resources and full protection of national interests. Developed jointly by the U.S. Department...
Federal Radionavigation Plan, (1986)
DOT National Transportation Integrated Search
1986-01-01
The Federal Radionavigation Plan (FRP) delineates policies and plans for radionavigation services provided by the U.S. Government to ensure efficient use of resources and full protection of national interests. Developed jointly by the U.S. Department...
NASA Astrophysics Data System (ADS)
Shah, Rahul H.
Production costs account for the largest share of the overall cost of manufacturing facilities. With the U.S. industrial sector becoming more and more competitive, manufacturers are looking for more cost and resource efficient working practices. Operations management and production planning have shown their capability to dramatically reduce manufacturing costs and increase system robustness. When implementing operations related decision making and planning, two fields that have shown to be most effective are maintenance and energy. Unfortunately, the current research that integrates both is limited. Additionally, these studies fail to consider parameter domains and optimization on joint energy and maintenance driven production planning. Accordingly, production planning methodology that considers maintenance and energy is investigated. Two models are presented to achieve well-rounded operating strategy. The first is a joint energy and maintenance production scheduling model. The second is a cost per part model considering maintenance, energy, and production. The proposed methodology will involve a Time-of-Use electricity demand response program, buffer and holding capacity, station reliability, production rate, station rated power, and more. In practice, the scheduling problem can be used to determine a joint energy, maintenance, and production schedule. Meanwhile, the cost per part model can be used to: (1) test the sensitivity of the obtained optimal production schedule and its corresponding savings by varying key production system parameters; and (2) to determine optimal system parameter combinations when using the joint energy, maintenance, and production planning model. Additionally, a factor analysis on the system parameters is conducted and the corresponding performance of the production schedule under variable parameter conditions, is evaluated. Also, parameter optimization guidelines that incorporate maintenance and energy parameter decision making in the production planning framework are discussed. A modified Particle Swarm Optimization solution technique is adopted to solve the proposed scheduling problem. The algorithm is described in detail and compared to Genetic Algorithm. Case studies are presented to illustrate the benefits of using the proposed model and the effectiveness of the Particle Swarm Optimization approach. Numerical Experiments are implemented and analyzed to test the effectiveness of the proposed model. The proposed scheduling strategy can achieve savings of around 19 to 27 % in cost per part when compared to the baseline scheduling scenarios. By optimizing key production system parameters from the cost per part model, the baseline scenarios can obtain around 20 to 35 % in savings for the cost per part. These savings further increase by 42 to 55 % when system parameter optimization is integrated with the proposed scheduling problem. Using this method, the most influential parameters on the cost per part are the rated power from production, the production rate, and the initial machine reliabilities. The modified Particle Swarm Optimization algorithm adopted allows greater diversity and exploration compared to Genetic Algorithm for the proposed joint model which results in it being more computationally efficient in determining the optimal scheduling. While Genetic Algorithm could achieve a solution quality of 2,279.63 at an expense of 2,300 seconds in computational effort. In comparison, the proposed Particle Swarm Optimization algorithm achieved a solution quality of 2,167.26 in less than half the computation effort which is required by Genetic Algorithm.
Parametric weight evaluation of joined wings by structural optimization
NASA Technical Reports Server (NTRS)
Miura, Hirokazu; Shyu, Albert T.; Wolkovitch, Julian
1988-01-01
Joined-wing aircraft employ tandem wings having positive and negative sweep and dihedral, arranged to form diamond shapes in both plan and front views. An optimization method was applied to study the effects of joined-wing geometry parameters on structural weight. The lightest wings were obtained by increasing dihedral and taper ratio, decreasing sweep and span, increasing fraction of airfoil chord occupied by structural box, and locating the joint inboard of the front wing tip.
2009-09-01
evaluate specific system equipment func- tions, performance, operations, and safety in the field environment. The planned test procedures require free space...emission of radiofrequency (RF) electromagnetic energy within a limited spectral region and controlled power spec- tral density. There would be...for personnel. The applicable DoD standard that provides required guidelines for permissible exposure limits of DoD personnel is DoD Instruction
Aligning the honors program with AGU's mission
NASA Astrophysics Data System (ADS)
Fine, Rana A.; Paredes, Elizabeth
2012-08-01
Over the past 2 years, AGU's Honors and Recognition (H&R) Committee (http://www.agu.org/about/governance/committees_boards/honors-recog.shtml) has been working to better align the Union medals, awards, and prizes with AGU's new vision, core values, and strategic plan. The changes described below have been approved by the AGU Council. The H&R Committee reviewed and evaluated its charge to see how it can be aligned to better support AGU's strategic plan (http://www.agu.org/about/strategic_plan.shtml). The committee formally defined medals, awards, and prizes. Medals are given for a scientific body of work in Earth and space sciences. Awards are related to science, society, and talent pool goals. Prizes are presented jointly by AGU and some other nonprofit, for-profit, government, and/or nongovernmental entities and involve significant funding.
De Filippis, Luigi Alberto Ciro; Serio, Livia Maria; Facchini, Francesco; Mummolo, Giovanni; Ludovico, Antonio Domenico
2016-11-10
A simulation model was developed for the monitoring, controlling and optimization of the Friction Stir Welding (FSW) process. This approach, using the FSW technique, allows identifying the correlation between the process parameters (input variable) and the mechanical properties (output responses) of the welded AA5754 H111 aluminum plates. The optimization of technological parameters is a basic requirement for increasing the seam quality, since it promotes a stable and defect-free process. Both the tool rotation and the travel speed, the position of the samples extracted from the weld bead and the thermal data, detected with thermographic techniques for on-line control of the joints, were varied to build the experimental plans. The quality of joints was evaluated through destructive and non-destructive tests (visual tests, macro graphic analysis, tensile tests, indentation Vickers hardness tests and t thermographic controls). The simulation model was based on the adoption of the Artificial Neural Networks (ANNs) characterized by back-propagation learning algorithm with different types of architecture, which were able to predict with good reliability the FSW process parameters for the welding of the AA5754 H111 aluminum plates in Butt-Joint configuration.
Studzinski, J
2017-06-01
The Digital Imaging Adoption Model (DIAM) has been jointly developed by HIMSS Analytics and the European Society of Radiology (ESR). It helps evaluate the maturity of IT-supported processes in medical imaging, particularly in radiology. This eight-stage maturity model drives your organisational, strategic and tactical alignment towards imaging-IT planning. The key audience for the model comprises hospitals with imaging centers, as well as external imaging centers that collaborate with hospitals. The assessment focuses on different dimensions relevant to digital imaging, such as software infrastructure and usage, workflow security, clinical documentation and decision support, data exchange and analytical capabilities. With its standardised approach, it enables regional, national and international benchmarking. All DIAM participants receive a structured report that can be used as a basis for presenting, e.g. budget planning and investment decisions at management level.
NASA Technical Reports Server (NTRS)
Ary, A.; Axtell, C.; Fogg, L.; Jackson, A.; James, A. M.; Mosesian, B.; Vanderwier, J.; Vanhamersveld, J.
1976-01-01
The empennage component selected for this program is the vertical fin box of the L-1011 aircraft. The box structure extends from the fuselage production joint to the tip rib and includes the front and rear spars. Various design options were evaluated to arrive at a configuration which would offer the highest potential for satisfying program objectives. The preferred configuration selected consists of a hat-stiffened cover with molded integrally stiffened spars, aluminum trussed composite ribs, and composite miniwich web ribs with integrally molded caps. Material screening tests were performed to select an advanced composite material system for the Advanced Composite Vertical Fin (ACFV) that would meet the program requirements from the standpoint of quality, reproducibility, and cost. Preliminary weight and cost analysis were made, targets established, and tracking plans developed. These include FAA certification, ancillary test program, quality control, and structural integrity control plans.
40 CFR 300.205 - Planning and coordination structure.
Code of Federal Regulations, 2010 CFR
2010-07-01
...) SUPERFUND, EMERGENCY PLANNING, AND COMMUNITY RIGHT-TO-KNOW PROGRAMS NATIONAL OIL AND HAZARDOUS SUBSTANCES... appropriate federal, state, and local officials to enhance the contingency planning of those officials and to assure pre-planning of joint response efforts, including appropriate procedures for mechanical recovery...
40 CFR 35.418 - Award limitations.
Code of Federal Regulations, 2014 CFR
2014-07-01
... STATE AND LOCAL ASSISTANCE Environmental Program Grants Water Quality Management Planning Grants... State agency: (a) Unless the agency develops its work plan jointly with local, regional and interstate... planning organizations to carry out portions of that work plan. (b) Unless the agency reports annually on...
40 CFR 35.418 - Award limitations.
Code of Federal Regulations, 2011 CFR
2011-07-01
... STATE AND LOCAL ASSISTANCE Environmental Program Grants Water Quality Management Planning Grants... State agency: (a) Unless the agency develops its work plan jointly with local, regional and interstate... planning organizations to carry out portions of that work plan. (b) Unless the agency reports annually on...
40 CFR 35.418 - Award limitations.
Code of Federal Regulations, 2012 CFR
2012-07-01
... STATE AND LOCAL ASSISTANCE Environmental Program Grants Water Quality Management Planning Grants... State agency: (a) Unless the agency develops its work plan jointly with local, regional and interstate... planning organizations to carry out portions of that work plan. (b) Unless the agency reports annually on...
Joint Command and Control of Cyber Operations: The Joint Force Cyber Component Command (JFCCC)
2012-05-04
relies so heavily on complex command and control systems and interconnectivity in general, cyber warfare has become a serious topic of interest at the...defensive cyber warfare into current and future operations and plans. In particular, Joint Task Force (JTF) Commanders must develop an optimum method to
NASA Technical Reports Server (NTRS)
Lewis, Pattie
2007-01-01
Headquarters National Aeronautics and Space Administration (NASA) chartered the NASA Acquisition Pollution Prevention (AP2) Office to coordinate agency activities affecting pollution prevention issues identified during system and component acquisition and sustainment processes. The primary objectives of the AP2 Office are to: (1) Reduce or eliminate the use of hazardous materials or hazardous processes at manufacturing, remanufacturing, and sustainment locations. (2) Avoid duplication of effort in actions required to reduce or eliminate hazardous materials through joint center cooperation and technology sharing. The objective of this project was to qualify candidate alternative Low-Emission Surface Preparation/Depainting Technologies for Structural Steel applications at NASA facilities. This project compares the surface preparation/depainting performance of the proposed alternatives to existing surface preparation/depainting systems or standards. This Joint Test Report (JTR) contains the results of testing as per the outlines of the Joint Test Protocol (JTP), Joint Test Protocol for Validation of Alternative Low-Emission Surface Preparation/Depainting Technologies for Structural Steel, and the Field Test Plan (FTP), Field Evaluations Test Plan for Validation of Alternative Low-Emission Surface Preparation/Depainting Technologies for Structural Steel, for critical requirements and tests necessary to qualify alternatives for coating removal systems. These tests were derived from engineering, performance, and operational impact (supportability) requirements defined by a consensus of government and industry participants. This JTR documents the results of the testing as well as any test modifications made during the execution of the project. This JTR is made available as a reference for future pollution prevention endeavors by other NASA Centers, the Department of Defense and commercial users to minimize duplication of effort. The current coating removal processes identified herein are for polyurethane, epoxy and other paint systems applied by conventional wet-spray processes. A table summarizes the target hazardous materials, processes and materials, applications, affected programs, and candidate substrates.
[Study on risk awareness and preparedness for pandemic flu among staff members from enterprises].
Wu, Jiang; Lv, Min; Wang, Quan-yi; Dong, Zhen-ying; Yi, Qing; Zhang, Xiantao
2007-01-01
To evaluate the risk awareness and preparedness related to pandemic flu in China. Two groups of people, mainly employers and employees from enterprises, were covered in the survey, using quantitative (questionnaire) and qualitative (in-depth interview) methods. The employers and employees were from joint-ventured corporations, large state-owned corporations and private companies which were randomly selected from 7 major cities in China. (1) 82% of the people surveyed and interviewed had basic knowledge on pandemic flu. (2) 60% of the joint-ventured corporations had worked out or were working on their business continuity plan in the event of pandemic flu, compared to that of state-owned corporations and private companies that the figure was only 21% . (3) 67% of the joint-ventured corporations had informed their preparedness plan on pandemic flu to their employees, while that of the state-owned and private corporations, it was only 42 %. (4) About 70 % of the corporations was establishing policies for restricting travel to affected geographic areas (both domestic and international), evacuating the employees who working in or near the affected area when an outbreak began. (5) Nearly 60 % of the corporations thought annual flu vaccination was important and hence encouraging and tracking annual flu vaccination for employees. (6) 70% of the corporations paid high attention on providing sufficient and accessible supplies (e. g. hand - hygiene products, tissues and receptacles for their disposal) to control the epidemics in all business locations while nearly 76 % of the corporations were interested in purchasing commercial medical insurance. Joint-verntured corporation were doing better than domestic corporations in terms of risk awareness and preparedness on pandemic flu, suggesting that the domestic corporation should learn from them regarding on pandemic flu preparedness to limit the negative impact of pandemic flu.
Pelajo, Christina F; Angeles-Han, Sheila T; Prahalad, Sampath; Sgarlat, Caitlin M; Davis, Trevor E; Miller, Laurie C; Lopez-Benitez, Jorge M
2013-10-01
To examine the association between ethnicity and disease activity in patients with juvenile idiopathic arthritis (JIA), and to determine the association of ethnicity with disease severity and disability in this population. CARRAnet, a US database containing information (collected between May 2010 and June 2011) on almost 3,000 subjects with JIA, was used. Demographic variables were compared between Hispanic patients and non-Hispanic patients. Mann-Whitney and chi-square tests were used to compare indicators of disease activity, as well as imaging evidence of joint damage, and Childhood Health Assessment Questionnaire (CHAQ) scores between ethnicities. Two linear regression models were used to determine the association of ethnicity with number of active joints in JIA, and the association between ethnicity and disability (CHAQ scores). A total of 2,704 patients with JIA (277 Hispanic; 2,427 non-Hispanic) were included. Income and health insurance coverage were higher in non-Hispanics. RF-positive polyarticular JIA, positive RF and anti-CCP, as well as use of systemic steroids were more frequent in Hispanics. Imaging evidence of joint damage was present in 32 % of the Hispanic patients compared to 24 % of the non-Hispanic patients (p = 0.008). In multivariate linear regression analyses, the number of active joints was significantly higher in Hispanics than in non-Hispanics (p = 0.03), as well as CHAQ scores (p = 0.003), after adjusting for confounders. Hispanic patients with JIA had higher disease activity than non-Hispanic patients, as well as higher disease severity and disability. Since ethnicity influences disease activity, severity, and disability, different management and treatment plans should be planned accordingly.
NASA Technical Reports Server (NTRS)
Chen, Guanrong
1991-01-01
An optimal trajectory planning problem for a single-link, flexible joint manipulator is studied. A global feedback-linearization is first applied to formulate the nonlinear inequality-constrained optimization problem in a suitable way. Then, an exact and explicit structural formula for the optimal solution of the problem is derived and the solution is shown to be unique. It turns out that the optimal trajectory planning and control can be done off-line, so that the proposed method is applicable to both theoretical analysis and real time tele-robotics control engineering.
An evaluation of end-point trajectory planning during skilled kicking.
Ford, Paul; Hodges, Nicola J; Mark Williams, A
2009-01-01
There is evidence that actions are planned by anticipation of their external effects, with the strength of this effect being dependent on the amount of prior practice. In Experiment 1, skilled soccer players performed a kicking task under four conditions: planning in terms of an external action effect (i.e., ball trajectory) or in terms of body movements, either with or without visual error feedback. When feedback was withheld, a ball focus resulted in more accurate outcomes than a body focus. When visual feedback was allowed, there was no difference between these two conditions. In Experiment 2, both skilled and novice soccer players were tested with the addition of a control condition and in the absence of visual feedback. For both groups there was evidence that a ball focus was more beneficial for performance than a body focus, particularly in terms of movement kinematics where correlations across the joints were generally higher for body rather than ball planning. Most skilled participants reported that ball planning felt more normal than body planning. These experiments provide some evidence that actions are planned in terms of their external action effects, supporting the common-coding hypothesis of action planning.
Insufficient sensitivity of joint aspiration during the two-stage exchange of the hip with spacers.
Boelch, Sebastian Philipp; Weissenberger, Manuel; Spohn, Frederik; Rudert, Maximilian; Luedemann, Martin
2018-01-10
Evaluation of infection persistence during the two-stage exchange of the hip is challenging. Joint aspiration before reconstruction is supposed to rule out infection persistence. Sensitivity and specificity of synovial fluid culture and synovial leucocyte count for detecting infection persistence during the two-stage exchange of the hip were evaluated. Ninety-two aspirations before planned joint reconstruction during the two-stage exchange with spacers of the hip were retrospectively analyzed. The sensitivity and specificity of synovial fluid culture was 4.6 and 94.3%. The sensitivity and specificity of synovial leucocyte count at a cut-off value of 2000 cells/μl was 25.0 and 96.9%. C-reactive protein (CRP) and erythrocyte sedimentation rate (ESR) values were significantly higher before prosthesis removal and reconstruction or spacer exchange (p = 0.00; p = 0.013 and p = 0.039; p = 0.002) in the infection persistence group. Receiver operating characteristic area under the curve values before prosthesis removal and reconstruction or spacer exchange for ESR were lower (0.516 and 0.635) than for CRP (0.720 and 0.671). Synovial fluid culture and leucocyte count cannot rule out infection persistence during the two-stage exchange of the hip.
Less common upper limb mononeuropathies.
Williams, Faren H; Kumiga, Bryan
2013-05-01
This article will focus on the less commonly injured nerves of the upper extremity. These nerves may be involved when trauma results in fractures, dislocations, or swelling with resultant nerve compression. Tumors and ganglions can also compress nerves, causing pain and, over time, demyelination or axon degeneration with weakness. Other mechanisms for upper limb nerve injury include participation in high-level sports, that is, those that generate torque about the arm and shoulder, abnormal stresses about the joints and muscles, or muscle hypertrophy, which may result in nerve injury. The goals of this review are to discuss the clinical presentation and possible causes of upper extremity nerve entrapments and to formulate an electrodiagnostic plan for evaluation. Descriptions of the appropriate nerve conduction studies or needle electromyographic protocols are included for specific nerves. The purpose of the electrodiagnostic examination is to evaluate the degree of nerve injury, axon loss over time, and later, evidence for reinnervation to assist with prognostication. The latter has implications for management of the neuropathy, including the type of exercises and therapy that may be indicated to help maintain the stability and motion of the involved joint(s) and promote strengthening over time as the nerve regenerates. Copyright © 2013 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.
A model to explain joint patterns found in ignimbrite deposits
NASA Astrophysics Data System (ADS)
Tibaldi, A.; Bonali, F. L.
2018-03-01
The study of fracture systems is of paramount importance for economic applications, such as CO2 storage in rock successions, geothermal and hydrocarbon exploration and exploitation, and also for a better knowledge of seismogenic fault formation. Understanding the origin of joints can be useful for tectonic studies and for a geotechnical characterisation of rock masses. Here, we illustrate a joint pattern discovered in ignimbrite deposits of South America, which can be confused with conjugate tectonic joint sets but which have another origin. The pattern is probably common, but recognisable only in plan view and before tectonic deformation obscures and overprints it. Key sites have been mostly studied by field surveys in Bolivia and Chile. The pattern is represented by hundreds-of-meters up to kilometre-long swarms of master joints, which show circular to semi-circular geometries and intersections that have "X" and "Y" patterns. Inside each swarm, joints are systematic, rectilinear or curvilinear in plan view, and as much as 900 m long. In section view, they are from sub-vertical to vertical and do not affect the underlying deposits. Joints with different orientation mostly interrupt each other, suggesting they have the same age. This joint architecture is here interpreted as resulting from differential contraction after emplacement of the ignimbrite deposit above a complex topography. The set of the joint pattern that has suitable orientation with respect to tectonic stresses may act to nucleate faults.
Joint operations planning for space surveillance missions on the MSX satellite
NASA Technical Reports Server (NTRS)
Stokes, Grant; Good, Andrew
1994-01-01
The Midcourse Space Experiment (MSX) satellite, sponsored by BMDO, is intended to gather broad-band phenomenology data on missiles, plumes, naturally occurring earthlimb backgrounds and deep space backgrounds. In addition the MSX will be used to conduct functional demonstrations of space-based space surveillance. The JHU/Applied Physics Laboratory (APL), located in Laurel, MD, is the integrator and operator of the MSX satellite. APL will conduct all operations related to the MSX and is charged with the detailed operations planning required to implement all of the experiments run on the MSX except the space surveillance experiments. The non-surveillance operations are generally amenable to being defined months ahead of time and being scheduled on a monthly basis. Lincoln Laboratory, Massachusetts Institute of Technology (LL), located in Lexington, MA, is the provider of one of the principle MSX instruments, the Space-Based Visible (SBV) sensor, and the agency charged with implementing the space surveillance demonstrations on the MSX. The planning timelines for the space surveillance demonstrations are fundamentally different from those for the other experiments. They are generally amenable to being scheduled on a monthly basis, but the specific experiment sequence and pointing must be refined shortly before execution. This allocation of responsibilities to different organizations implies the need for a joint mission planning system for conducting space surveillance demonstrations. This paper details the iterative, joint planning system, based on passing responsibility for generating MSX commands for surveillance operations from APL to LL for specific scheduled operations. The joint planning system, including the generation of a budget for spacecraft resources to be used for surveillance events, has been successfully demonstrated during ground testing of the MSX and is being validated for MSX launch within the year. The planning system developed for the MSX forms a model possibly applicable to developing distributed mission planning systems for other multi-use satellites.
NIRcam-NIRSpec GTO Observations of Galaxy Evolution
NASA Astrophysics Data System (ADS)
Rieke, Marcia J.; Ferruit, Pierre; Alberts, Stacey; Bunker, Andrew; Charlot, Stephane; Chevallard, Jacopo; Dressler, Alan; Egami, Eiichi; Eisenstein, Daniel; Endsley, Ryan; Franx, Marijn; Frye, Brenda L.; Hainline, Kevin; Jakobsen, Peter; Lake, Emma Curtis; Maiolino, Roberto; Rix, Hans-Walter; Robertson, Brant; Stark, Daniel; Williams, Christina; Willmer, Christopher; Willott, Chris J.
2017-06-01
The NIRSpec and and NIRCam GTO Teams are planning a joint imaging and spectroscopic study of the high redshift universe. By virtue of planning a joint program which includes medium and deep near- and mid-infrared imaging surveys and multi-object spectroscopy (MOS) of sources in the same fields, we have learned much about planning observing programs for each of the instruments and using them in parallel mode to maximize photon collection time. The design and rationale for our joint program will be explored in this talk with an emphasis on why we have chosen particular suites of filters and spectroscopic resolutions, why we have chosen particular exposure patterns, and how we have designed the parallel observations. The actual observations that we intend on executing will serve as examples of how to layout mosaics and MOS observations to maximize observing efficiency for surveys with JWST.
Khalifa, Hind; Alnuaim, Aziza A; Young, Richard A; Marshall, Sheila K; Popadiuk, Natalee
2018-02-01
Little is known about the transition to adulthood in traditional, developing countries such as Saudi Arabia. Previous research in other countries has revealed the importance of considering parents' support during the transition to adulthood. Thus, the purpose of this research was to examine how two generations negotiated the transition to adulthood. We asked the research question, What are the joint projects in which parents and youth plan and act on their plans for the youth's future? We used the action project method, an established qualitative approach, to answer these questions by observing the joint conversations of 14 parent and youth dyads. Our results provided evidence of an overarching higher level goal, or intentional framework, of crafting generational change and continuity within which participants' joint projects were embedded. Joint projects were organized into three groups: (a) negotiating educational and career futures, (b) promoting gender roles and marriage, and (c) shaping independence. Copyright © 2017 The Foundation for Professionals in Services for Adolescents. All rights reserved.
Barrett, Barbara; Waheed, Waquas; Farrelly, Simone; Birchwood, Max; Dunn, Graham; Flach, Clare; Henderson, Claire; Leese, Morven; Lester, Helen; Marshall, Max; Rose, Diana; Sutherby, Kim; Szmukler, George; Thornicroft, Graham; Byford, Sarah
2013-01-01
Compulsory admission to psychiatric hospitals may be distressing, disruptive to patients and families, and associated with considerable cost to the health service. Improved patient experience and cost reductions could be realised by providing cost-effective crisis planning services. Economic evaluation within a multi-centre randomised controlled trial comparing Joint Crisis Plans (JCP) plus treatment as usual (TAU) to TAU alone for patients aged over 16, with at least one psychiatric hospital admission in the previous two years and on the Enhanced Care Programme Approach register. JCPs, containing the patient's treatment preferences for any future psychiatric emergency, are a form of crisis intervention that aim to mitigate the negative consequences of relapse, including hospital admission and use of coercion. Data were collected at baseline and 18-months after randomisation. The primary outcome was admission to hospital under the Mental Health Act. The economic evaluation took a service perspective (health, social care and criminal justice services) and a societal perspective (additionally including criminal activity and productivity losses). The addition of JCPs to TAU had no significant effect on compulsory admissions or total societal cost per participant over 18-months follow-up. From the service cost perspective, however, evidence suggests a higher probability (80%) of JCPs being the more cost-effective option. Exploration by ethnic group highlights distinct patterns of costs and effects. Whilst the evidence does not support the cost-effectiveness of JCPs for White or Asian ethnic groups, there is at least a 90% probability of the JCP intervention being the more cost-effective option in the Black ethnic group. The results by ethnic group are sufficiently striking to warrant further investigation into the potential for patient gain from JCPs among black patient groups. Current Controlled Trials ISRCTN11501328.
Federal Radionavigation Plan. Vol. II. Requirements
DOT National Transportation Integrated Search
1980-07-01
The Federal Radionavigation Plan (FRP) has been jointly developed by the U.S. Departments of Defense and Transportation to ensure efficient use of resources and full protection of national interests. The plan sets forth the Federal interagency approa...
Cost-Benefit Analysis for Alternatives to Aliphatic Isocyanate Polyurethanes
NASA Technical Reports Server (NTRS)
Lewis, Pattie
2007-01-01
NASA and Air Force Space Command (AFSPC) have similar missions and therefore similar facilities and structures in similar environments. The standard practice for protecting metallic substrates in atmospheric environments is the application of an applied coating system. The most common topcoats used in coating systems are polyurethanes that contain isocyanates. Isocyanates are classified as potential human carcinogens and are known to cause cancer in animals. The primary objective of this effort was to demonstrate and validate alternatives to aliphatic isocyanate polyurethanes resulting in one or more isocyanate-free coatings qualified for use at AFSPC and NASA installations participating in this project. This Cost-Benefit Analysis (CBA) quantifies the estimated capital and process costs of coating alternatives and cost savings relative to the current coatings. The estimates in this CBA are to be used for assessing the relative merits of the selected alternatives. The actual economic effects at any specific facility will depend on the alternative material or technology implemented, the number of actual applications converted, future workloads, and other factors . The participants initially considered eighteen (18) alternative coatings as described in the Potential Alternatives Report entitled Potential Alternatives Report for Validation of Alternatives to Aliphatic Isocyanate Polyurethanes, prepared by ITB. Of those, 8 alternatives were selected for testing in accordance with the Joint Test Protocol entitled Joint Test Protocol for Validation of Alternatives to Aliphatic Isocyanate Polyurethanes, and the Field Test Plan entitled Field Evaluations Test Plan for Validation of Alternatives 10 Aliphatic Isocyanate Polyurethanes, both of which were prepared by ITB. A joint Test Report entitled Joint Test Report for Validation of Alternatives to Aliphatic Isocyanate Polyurethanes, prepared by ITB, documents the results of the laboratory and field testing, as well as any test modifications made during the execution of the testing. The coatings selected for evaluation in this CBA are shown in the table below. Only one control coating system is considered in this analysis. These coatings were either downselected for Phase II or performed well enough to be included in the Qualified Products List in the NASA technical standard NASA-STD-5008, Protective Coating of Carbon Steel, Stainless Steel, and Aluminum on Launch Structures, Facilities, and Ground Support Equipment.
Joint dynamics of rear- and fore-foot unplanned sidestepping.
Donnelly, Cyril J; Chinnasee, Chamnan; Weir, Gillian; Sasimontonkul, Siriporn; Alderson, Jacqueline
2017-01-01
Compare the lower-limb mechanics and anterior cruciate ligament (ACL) injury risk of athletes using a habitual rear-foot (RF) and fore-foot (FF) fall pattern during unplanned sidestepping (UnSS). Experimental cross-sectional. Nineteen elite female field hockey players attended one biomechanical motion capture testing session, which consisted of a random series of pre-planned and unplanned sidestepping sport tasks. Following data collection, participants were classified as possessing a habitual RF or FF fall pattern during UnSS. Hip, knee and ankle joint angles, moments, instantaneous powers and net joint work were calculated during weight acceptance. Between group differences were evaluated using independent sample t-tests (α=0.05). Athletes using a habitual RF fall pattern during UnSS absorbed significantly more work and power through their knee joint (p<0.001), which was coupled with significantly elevated externally applied peak non-sagittal plane peak ankle moments (p<0.05) as well as peak flexion and abduction knee moments (p<0.005). Athletes using a habitual FF fall pattern during UnSS absorbed more power through their ankle joint (p<0.001). A RF fall pattern during UnSS places a large mechanical demand on the knee joint, which is associated with elevated ACL injury risk. Conversely, a FF fall pattern placed a large mechanical demand on the ankle joint. Modifying an athlete's foot fall pattern during UnSS may be viable technique recommendation when returning from knee or ankle injury. Copyright © 2016 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.
Transition from paediatric surgery: how many patients do we need to plan for?
Jones, A R; John, M; Singh, S J; Williams, A R
2016-11-01
INTRODUCTION Transitional care is an NHS priority with newly published NICE guidance. Many paediatric surgical patients need quality care to continue into adulthood. We undertook an evaluation of our departmental activity to assess the magnitude of this issue. METHODS We identified all outpatients ≥ 15 years (potentially requiring imminent transition) seen over a 12 month period for all five general paediatric surgery consultants in our tertiary centre. Those patients requiring transition were highlighted and the appropriate adult team for referral recorded. RESULTS There were 2989 general paediatric surgery clinic appointments within the year; 289 (9.7%) were for young people aged 15 years or older; 62 patients (28% of those ≥ 15years) were deemed to require transition into adult care. Significantly more patients having colorectal surgery required follow-up (P = 0.0009 Chi-square test) compared with patients in other subspecialties. CONCLUSIONS More patients than expected required transition. This may be the case in other units. Current best practice includes time intensive preclinic planning, careful preparation of patient and family, followed by joint clinics. A joint clinic appointment takes 30 minutes, allowing for comprehensive handover and forging new relationships. In our department, we need at least ten transition clinics across 2 years. Coalition with adult colleagues is vital. These data enable us to plan services to provide quality care for our adolescent patients and highlights colorectal surgery as a priority.
Kusters, Koen; Buck, Louise; de Graaf, Maartje; Minang, Peter; van Oosten, Cora; Zagt, Roderick
2018-07-01
Integrated landscape initiatives typically aim to strengthen landscape governance by developing and facilitating multi-stakeholder platforms. These are institutional coordination mechanisms that enable discussions, negotiations, and joint planning between stakeholders from various sectors in a given landscape. Multi-stakeholder platforms tend to involve complex processes with diverse actors, whose objectives and focus may be subjected to periodic re-evaluation, revision or reform. In this article we propose a participatory method to aid planning, monitoring, and evaluation of such platforms, and we report on experiences from piloting the method in Ghana and Indonesia. The method is comprised of three components. The first can be used to look ahead, identifying priorities for future multi-stakeholder collaboration in the landscape. It is based on the identification of four aspirations that are common across multi-stakeholder platforms in integrated landscape initiatives. The second can be used to look inward. It focuses on the processes within an existing multi-stakeholder platform in order to identify areas for possible improvement. The third can be used to look back, identifying the main outcomes of an existing platform and comparing them to the original objectives. The three components can be implemented together or separately. They can be used to inform planning and adaptive management of the platform, as well as to demonstrate performance and inform the design of new interventions.
Application of Pulse Code Modulation (PCM) Technology to Aircraft Dynamics Data Acquisition.
1981-04-01
and 27 is a summary of pro- jected contract awards. This plan is ordered to minimize develop- ment risks and costs in the evolution of a fully qualified...160 DOTS/INCH YES YES FORTRAN CALLABLE PLOT SOFTWARE YES YES ANALYSIS SOFTWARE YES YES 206 7. RECOMM0ENDATIONS The evaluation of the results of Phase...on metallic heat strips and specific heat sinks to provide a high degree of heat conduction from the component bodies through bonded joints to the
ERIC Educational Resources Information Center
Bates, A. W.
The JANUS (Joint Academic Network Using Satellite) satellite network is being planned to link European institutions wishing to jointly produce distance teaching materials. Earth stations with capabilities for transmit/receive functions, voice/data functions, two 64 kbs channels, and connection to local telephone exchange and computer networks will…
Status of joint US/USSR experiments planned for the Cosmos '83 biosatellite mission
NASA Technical Reports Server (NTRS)
Souza, K. A.
1982-01-01
The plans and status of the fourth joint US/USSR biosatellite experiment, scheduled to be conducted in the last half of 1983, are discussed. These experiments will be conducted on board an unmanned Soviet spacecraft and will involve two restrained Rhesus monkeys and 10 pregnant rats, as well as a variety of small plant and radiation biology experiments. Three of the joint studies will use the monkeys for studies of biorhythms, calcium homeostasis, and the cardiovascular system. The fourth experiment will study rodent embryogenesis and neonatal behavior and development following in utero exposure to spaceflight. Specialized sensors and battery powered hardware have been designed, fabricated, and qualified for flight.
Automated Support for Rapid Coordination of Joint UUV Operation
2015-03-01
automata , dead-reckoning, static plan, nmtime plan, rapid deployment, GPS 17. SECURITY CLASSIFICATION OF REPORT Unclassified 18. SECURITY...STATE MACHINES, MOORE AUTOMATA ..........................................9 A. MOORE AUTOMATA ...9 B. UUV PLANS AS MOORE AUTOMATA ...................................................11 C. SAMPLING RATE
Enhanced Planning Review of the San Francisco Metropolitan Area
DOT National Transportation Integrated Search
1996-07-01
FTA and FHWA have initiated a series of joint Enhanced Planning Reviews (EPRs) to assess the impact of the Intermodal Surface Transportation Efficiency Act of 1991 (ISTEA) on the planning processes conducted by the transportation agencies serving the...
Federal Radionavigation Plan. Volume III : Radionavigation System Characteristics
DOT National Transportation Integrated Search
1980-07-01
The Federal Radionavigation Plan (FRP) has been jointly developed by the U.S. Departments of Defense and Transportation to ensure efficient use of resources and full protection of national interests. The plan sets forth the Federal interagency approa...
Federal Radionavigation Plan. Vol. II. Requirements.
DOT National Transportation Integrated Search
1982-03-01
The second edition of the Federal Radionavigation Plan (FRP) has been jointly developed by the U.S. Departments of Defense and Transportation to ensure efficient use of resources and full protection of national interests. The plan sets forth the Fede...
Failure tolerance strategy of space manipulator for large load carrying tasks
NASA Astrophysics Data System (ADS)
Chen, Gang; Yuan, Bonan; Jia, Qingxuan; Sun, Hanxu; Guo, Wen
2018-07-01
During the execution of large load carrying tasks in long term service, there is a notable risk of space manipulator suffering from locked-joint failure, thus space manipulator should be with enough failure tolerance performance. A research on evaluating failure tolerance performance and re-planning feasible task trajectory for space manipulator performing large load carrying tasks is conducted in this paper. The effects of locked-joint failure on critical performance(reachability and load carrying capacity) of space manipulator are analyzed at first. According to the requirements of load carrying tasks, we further propose a new concept of failure tolerance workspace with load carrying capacity(FTWLCC) to evaluate failure tolerance performance, and improve the classic A* algorithm to search the feasible task trajectory. Through the normalized FTWLCC and the improved A* algorithm, the reachability and load carrying capacity of the degraded space manipulator are evaluated, and the reachable and capable trajectory can be obtained. The establishment of FTWLCC provides a novel idea that combines mathematical statistics with failure tolerance performance to illustrate the distribution of load carrying capacity in three-dimensional space, so multiple performance indices can be analyzed simultaneously and visually. And the full consideration of all possible failure situations and motion states makes FTWLCC and improved A* algorithm be universal and effective enough to be appropriate for random joint failure and variety of requirement of large load carrying tasks, so they can be extended to other types of manipulators.
Counterinsurgency and Operational Art: Is the Joint Campaign Planning Model Adequate?
2003-01-01
ART: IS THE JOINT CAMAPIGN PLANNING MODEL ADEQUATE? by MAJ Thomas Erik Miller, USA, 90 pages. The United States has conducted or supported more than a...increase. Some of the effects of the fall of the Soviet Union were a loosening of internal and external political and social controls in formerly Soviet...order” in the social , economic and political arena through rapid growth in population and urbanization in the underdeveloped world, globalization and
Reliability Technology to Achieve Insertion of Advanced Packaging (RELTECH) program
NASA Astrophysics Data System (ADS)
Fayette, Daniel F.; Speicher, Patricia; Stoklosa, Mark J.; Evans, Jillian V.; Evans, John W.; Gentile, Mike; Pagel, Chuck A.; Hakim, Edward
1993-08-01
A joint military-commercial effort to evaluate multichip module (MCM) structures is discussed. The program, Reliability Technology to Achieve Insertion of Advanced Packaging (RELTECH), has been designed to identify the failure mechanisms that are possible in MCM structures. The RELTECH test vehicles, technical assessment task, product evaluation plan, reliability modeling task, accelerated and environmental testing, and post-test physical analysis and failure analysis are described. The information obtained through RELTECH can be used to address standardization issues, through development of cost effective qualification and appropriate screening criteria, for inclusion into a commercial specification and the MIL-H-38534 general specification for hybrid microcircuits.
Reliability Technology to Achieve Insertion of Advanced Packaging (RELTECH) program
NASA Technical Reports Server (NTRS)
Fayette, Daniel F.; Speicher, Patricia; Stoklosa, Mark J.; Evans, Jillian V.; Evans, John W.; Gentile, Mike; Pagel, Chuck A.; Hakim, Edward
1993-01-01
A joint military-commercial effort to evaluate multichip module (MCM) structures is discussed. The program, Reliability Technology to Achieve Insertion of Advanced Packaging (RELTECH), has been designed to identify the failure mechanisms that are possible in MCM structures. The RELTECH test vehicles, technical assessment task, product evaluation plan, reliability modeling task, accelerated and environmental testing, and post-test physical analysis and failure analysis are described. The information obtained through RELTECH can be used to address standardization issues, through development of cost effective qualification and appropriate screening criteria, for inclusion into a commercial specification and the MIL-H-38534 general specification for hybrid microcircuits.
NASA Astrophysics Data System (ADS)
Burgos, Ninon; Guerreiro, Filipa; McClelland, Jamie; Presles, Benoît; Modat, Marc; Nill, Simeon; Dearnaley, David; deSouza, Nandita; Oelfke, Uwe; Knopf, Antje-Christin; Ourselin, Sébastien; Cardoso, M. Jorge
2017-06-01
To tackle the problem of magnetic resonance imaging (MRI)-only radiotherapy treatment planning (RTP), we propose a multi-atlas information propagation scheme that jointly segments organs and generates pseudo x-ray computed tomography (CT) data from structural MR images (T1-weighted and T2-weighted). As the performance of the method strongly depends on the quality of the atlas database composed of multiple sets of aligned MR, CT and segmented images, we also propose a robust way of registering atlas MR and CT images, which combines structure-guided registration, and CT and MR image synthesis. We first evaluated the proposed framework in terms of segmentation and CT synthesis accuracy on 15 subjects with prostate cancer. The segmentations obtained with the proposed method were compared using the Dice score coefficient (DSC) to the manual segmentations. Mean DSCs of 0.73, 0.90, 0.77 and 0.90 were obtained for the prostate, bladder, rectum and femur heads, respectively. The mean absolute error (MAE) and the mean error (ME) were computed between the reference CTs (non-rigidly aligned to the MRs) and the pseudo CTs generated with the proposed method. The MAE was on average 45.7+/- 4.6 HU and the ME -1.6+/- 7.7 HU. We then performed a dosimetric evaluation by re-calculating plans on the pseudo CTs and comparing them to the plans optimised on the reference CTs. We compared the cumulative dose volume histograms (DVH) obtained for the pseudo CTs to the DVH obtained for the reference CTs in the planning target volume (PTV) located in the prostate, and in the organs at risk at different DVH points. We obtained average differences of -0.14 % in the PTV for {{D}98 % } , and between -0.14 % and 0.05% in the PTV, bladder, rectum and femur heads for D mean and {{D}2 % } . Overall, we demonstrate that the proposed framework is able to automatically generate accurate pseudo CT images and segmentations in the pelvic region, potentially bypassing the need for CT scan for accurate RTP.
Huamán-Angulo, Lizardo; Liendo-Lucano, Lindaura; Nuñez-Vergara, Manuel
2011-06-01
Human resources are the backbone of health sector actions; however, they are not necessarily the area with the greatest attention, therefore, the Ministry of Health of Peru (MINSA) together with regional governments, led the Decentralized and Agreed Sector Plan for the Capacity Development in Health 2010-2014 (PLANSALUD) with the aim of strengthening the capacities of Human Resources for Health (HRH) and contribute to health care efficient development, quality, relevance, equity and multiculturalism, in the context of descentralization, the Universal Health Insurance (AUS) and health policies. To achieve this goal, they have proposed three components (technical assistance, joint training and education - health articulation) that bring together an important set of interventions, which are planned and defined according to the national, regional and local levels, thus contributing to improve the government capacity, capability management and delivery of health services. This paper presents a first approach of PLANSALUD, including aspects related to planning, management, financing, structure and functioning, as well as monitoring and evaluation measures.
NASA Astrophysics Data System (ADS)
Mearns, L. O.; Sain, S. R.; McGinnis, S. A.; Steinschneider, S.; Brown, C. M.
2015-12-01
In this talk we present the development of a joint Bayesian Probabilistic Model for the climate change results of the North American Regional Climate Change Assessment Program (NARCCAP) that uses a unique prior in the model formulation. We use the climate change results (joint distribution of seasonal temperature and precipitation changes (future vs. current)) from the global climate models (GCMs) that provided boundary conditions for the six different regional climate models used in the program as informative priors for the bivariate Bayesian Model. The two variables involved are seasonal temperature and precipitation over sub-regions (i.e., Bukovsky Regions) of the full NARCCAP domain. The basic approach to the joint Bayesian hierarchical model follows the approach of Tebaldi and Sansó (2009). We compare model results using informative (i.e., GCM information) as well as uninformative priors. We apply these results to the Water Evaluation and Planning System (WEAP) model for the Colorado Springs Utility in Colorado. We investigate the layout of the joint pdfs in the context of the water model sensitivities to ranges of temperature and precipitation results to determine the likelihoods of future climate conditions that cannot be accommodated by possible adaptation options. Comparisons may also be made with joint pdfs formed from the CMIP5 collection of global climate models and empirically downscaled to the region of interest.
32 CFR 813.6 - Planning and requesting combat documentation.
Code of Federal Regulations, 2010 CFR
2010-07-01
... Joint Operation Planning and Execution System, that in turn, requests support from HQ AMC. HQ USAF can... 32 National Defense 6 2010-07-01 2010-07-01 false Planning and requesting combat documentation... SALES AND SERVICES VISUAL INFORMATION DOCUMENTATION PROGRAM § 813.6 Planning and requesting combat...
Helicopter Surveys for Locating Wells and Leaking Oilfield Infrastructure
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hammack, R.W.; Veloski, G.A.; Hodges, G.
2006-10-01
Prior to the injection of CO2 into geological formations, either for enhanced oil recovery or for CO2 sequestration, it is necessary to locate wells that perforate the target formation and are within the radius of influence for planned injection wells. Locating and plugging wells is necessary because improperly plugged well bores provide the most rapid route for CO2 escape to the surface. This paper describes the implementation and evaluation of helicopter and ground-based well detection strategies at a 100+ year old oilfield in Wyoming where a CO2 flood is planned. This project was jointly funded by the U.S. Department ofmore » Energy’s National Energy Technology Laboratory and Fugro Airborne Surveys« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Waddle, D.B.; MacDonald, J.M.
1990-01-01
In an effort to analyze and document the potential for power sector efficiency improvements from generation to end-use, the Agency for International Development and the Government of Costa Rica are jointly conducting an integrated power sector efficiency analysis. Potential for energy and cost savings in power plants, transmission and distribution, and demand-side management programs are being evaluated. The product of this study will be an integrated investment plan for the Instituto Costarricense de Electricidad, incorporating both supply and demand side investment options. This paper presents the methodology employed in the study, as well as preliminary estimates of the results ofmore » the study. 14 refs., 4 figs., 5 tabs.« less
24 CFR 943.122 - How is a consortium organized?
Code of Federal Regulations, 2010 CFR
2010-04-01
... URBAN DEVELOPMENT PUBLIC HOUSING AGENCY CONSORTIA AND JOINT VENTURES Consortia § 943.122 How is a... participating PHAs, specifying a lead agency (see § 943.124), and submit a joint PHA Plan (§ 943.118). HUD...
Risk management in international manned space program operations.
Seastrom, J W; Peercy, R L; Johnson, G W; Sotnikov, B J; Brukhanov, N
2004-02-01
New, innovative joint safety policies and requirements were developed in support of the Shuttle/Mir program, which is the first phase of the International Space Station program. This work has resulted in a joint multinational analysis culminating in joint certification for mission readiness. For these planning and development efforts, each nation's risk programs and individual safety practices had to be integrated into a comprehensive and compatible system that reflects the joint nature of the endeavor. This paper highlights the major incremental steps involved in planning and program integration during development of the Shuttle/Mir program. It traces the transition from early development to operational status and highlights the valuable lessons learned that apply to the International Space Station program (Phase 2). Also examined are external and extraneous factors that affected mission operations and the corresponding solutions to ensure safe and effective Shuttle/Mir missions. c2003 Published by Elsevier Ltd.
DSM-III field trials: II. Initial experience with the multiaxial system.
Spitzer, R L; Forman, J B
1979-06-01
The multiaxial system of DSM-III includes nondiagnostic data that are valuable in understanding possible etiological factors and in treatment planning and prognosis. The authors describe the reliability of axis IV--severity of psychosocial stressors--and axis V--highest level of adaptive functioning in the past year--for 281 adult patients interviewed in phase one of the DSM-III field trials. The kappa coefficient of agreement for axis IV was .62 for joint interviews and .58 for separate interviews, which the authors consider at least fair. Reliability for axis V was quite good, .80 for joint interviews and .69 for separate interviews. Eighty-one percent of the participating clinicians judged the multiaxial system to be a useful addition to traditional diagnostic evaluation, although many indicated that they had difficulty quantifying severity of psychosocial stressors.
Federal Register 2010, 2011, 2012, 2013, 2014
2013-03-12
...; Notice of Filing of the Third Amendment to the National Market System Plan to Address Extraordinary... following parties to the National Market System Plan: BATS Exchange, Inc., BATS Y- Exchange, Inc., Chicago... preparing, filing, and implementing national market system plans. I. Definitions (A) ``Eligible Reported...
Enhanced Planning Review of the Dallas-Fort Worth Metropolitan Area
DOT National Transportation Integrated Search
1996-06-01
FTA and FHWA have initiated a series of joint Enhanced Planning Reviews (EPRs) to assess the impact of the Intermodal Surface Transportation Efficiency Act of 1991 (ISTEA) on the planning processes conducted by the transportation agencies serving met...
National ITS Program Plan Intelligent Transportation Systems Volume I
DOT National Transportation Integrated Search
1995-03-01
ADVANCED TRAVELER INFORMATION SYSTEMS OR ATIS : THE PURPOSE OF THE NATIONAL ITS PROGRAM PLAN IS TO GUIDE THE DEVELOPMENT AND DEPLOYMENT OF INTELLIGENT TRANSPORTATION SYSTEMS (ITS) IN THE UNITED STATES. THIS, THE FIRST EDITION OF THE PLAN WAS A JOINT ...
National ITS Program Plan Executive Summary
DOT National Transportation Integrated Search
1995-03-01
THE PURPOSE OF THE NATIONAL ITS PROGRAM PLAN IS TO GUIDE THE DEVELOPMENT AND DEPLOYMENT OF INTELLIGENT TRANSPORTATION SYSTEMS (ITS) IN THE UNITED STATES. THIS FIRST EDITION OF THE PLAN WAS A JOINT EFFORT OF ITS AMERICA AND THE UNITED STATES DEPARTMEN...
Federal Radionavigation Plan. Volume III. Radionavigation System Characteristics
DOT National Transportation Integrated Search
1982-03-01
The second edition of the Federal Radionavigation Plan (FRP) has been jointly developed by the U.S. Departments of Defense and Transportation to ensure efficient use of resources and full protection of national interests. The plan sets forth the Fede...
Highway planning and operations for the Dallas district : freeway system plan methodology : summary
DOT National Transportation Integrated Search
1997-11-01
The System Planning Methodology was developed jointly by the Texas Department of Transportation (TxDOT), North Central Texas Council of Governments (NCTCOG), Dallas Area Rapid Transit (DART), and Texas Transportation Institute (TTI) as a transportati...
NASA Astrophysics Data System (ADS)
Huang, Y.; Liu, B. Z.; Wang, K. Y.; Ai, X.
2017-12-01
In response to the new requirements of the operation mode of wind-storage combined system and demand side response for transmission network planning, this paper presents a joint planning of energy storage and transmission considering wind-storage combined system and demand side response. Firstly, the charge-discharge strategy of energy storage system equipped at the outlet of wind farm and demand side response strategy are analysed to achieve the best comprehensive benefits through the coordination of the two. Secondly, in the general transmission network planning model with wind power, both energy storage cost and demand side response cost are added to the objective function. Not only energy storage operation constraints and but also demand side response constraints are introduced into the constraint condition. Based on the classical formulation of TEP, a new formulation is developed considering the simultaneous addition of the charge-discharge strategy of energy storage system equipped at the outlet of the wind farm and demand side response strategy, which belongs to a typical mixed integer linear programming model that can be solved by mature optimization software. The case study based on the Garver-6 bus system shows that the validity of the proposed model is verified by comparison with general transmission network planning model. Furthermore, the results demonstrate that the joint planning model can gain more economic benefits through setting up different cases.
Bird Habitat Conservation at Various Scales in the Atlantic Coast Joint Venture
Andrew Milliken; Craig Watson; Chuck Hayes
2005-01-01
The Atlantic Coast Joint Venture is a partnership focused on the conservation of habitats for migratory birds within the Atlantic Flyway/Atlantic Coast Region from Maine south to Puerto Rico. In order to be effective in planning and implementing conservation in this large and diverse area, the joint venture must work at multiple spatial scales, from the largest ?...
Larguier, L; Jamet, N
2015-01-01
To describe the use of two-dimensional computer-assisted tomography (CT) with three-dimensional (3D) reconstruction in the diagnosis and planning of surgical treatment of a case of false ankylosis of the temporomandibular joint. A young European Shorthaired cat was presented with the complaint of inability to eat and open its jaws. A CT scan with 3D reconstruction allowed visualization of the lesion which was causing extra-articular ankylosis of the temporomandibular joint. Surgery was performed to resect an osseous lesion of the zygomatic arch, thus freeing the temporomandibular joint. Postoperative physical therapy was initiated immediately following surgery, and then carried out by the owner with a one year follow-up. Clinical examination of the cat was performed during regular office visits (at 1 month and 3 months following surgery), which allowed objective assessment of postoperative recuperation. At the end of a year, the owners reported that the cat had maintained sufficient jaw opening without any signs consistent with chronic pain. Computed tomography scan with 3D reconstruction allowed planning of the surgical correction of extra-articular ankylosis of the temporomandibular joint, and in this case condylectomy was avoided, since temporomandibular joint range-of-motion was maintained.
Apollo Soyuz test project, USA-USSR. [mission plan of spacecraft docking
NASA Technical Reports Server (NTRS)
1975-01-01
The mission plan of the docking of a United States Apollo and a Soviet Union Soyuz spacecraft in Earth orbit to test compatible rendezvous and docking equipment and procedures is presented. Space experiments conducted jointly by the astronauts and cosmonauts during the joint phase of the mission as well as experiments performed solely by the U.S. astronauts and spread over the nine day span of the flight are included. Biographies of the astronauts and cosmonauts are given.
Mootanah, R.; Imhauser, C.W.; Reisse, F.; Carpanen, D.; Walker, R.W.; Koff, M.F.; Lenhoff, M.W.; Rozbruch, S.R.; Fragomen, A.T.; Dewan, Z.; Kirane, Y.M.; Cheah, Pamela A.; Dowell, J.K.; Hillstrom, H.J.
2014-01-01
A three-dimensional (3D) knee joint computational model was developed and validated to predict knee joint contact forces and pressures for different degrees of malalignment. A 3D computational knee model was created from high-resolution radiological images to emulate passive sagittal rotation (full-extension to 65°-flexion) and weight acceptance. A cadaveric knee mounted on a six-degree-of-freedom robot was subjected to matching boundary and loading conditions. A ligament-tuning process minimised kinematic differences between the robotically loaded cadaver specimen and the finite element (FE) model. The model was validated by measured intra-articular force and pressure measurements. Percent full scale error between EE-predicted and in vitro-measured values in the medial and lateral compartments were 6.67% and 5.94%, respectively, for normalised peak pressure values, and 7.56% and 4.48%, respectively, for normalised force values. The knee model can accurately predict normalised intra-articular pressure and forces for different loading conditions and could be further developed for subject-specific surgical planning. PMID:24786914
Mootanah, R; Imhauser, C W; Reisse, F; Carpanen, D; Walker, R W; Koff, M F; Lenhoff, M W; Rozbruch, S R; Fragomen, A T; Dewan, Z; Kirane, Y M; Cheah, K; Dowell, J K; Hillstrom, H J
2014-01-01
A three-dimensional (3D) knee joint computational model was developed and validated to predict knee joint contact forces and pressures for different degrees of malalignment. A 3D computational knee model was created from high-resolution radiological images to emulate passive sagittal rotation (full-extension to 65°-flexion) and weight acceptance. A cadaveric knee mounted on a six-degree-of-freedom robot was subjected to matching boundary and loading conditions. A ligament-tuning process minimised kinematic differences between the robotically loaded cadaver specimen and the finite element (FE) model. The model was validated by measured intra-articular force and pressure measurements. Percent full scale error between FE-predicted and in vitro-measured values in the medial and lateral compartments were 6.67% and 5.94%, respectively, for normalised peak pressure values, and 7.56% and 4.48%, respectively, for normalised force values. The knee model can accurately predict normalised intra-articular pressure and forces for different loading conditions and could be further developed for subject-specific surgical planning.
Development of biomechanical models for human factors evaluations
NASA Technical Reports Server (NTRS)
Woolford, Barbara; Pandya, Abhilash; Maida, James
1991-01-01
Previewing human capabilities in a computer-aided engineering mode has assisted greatly in planning well-designed systems without the cost and time involved in mockups and engineering models. To date, the computer models have focused on such variables as field of view, accessibility and fit, and reach envelopes. Program outputs have matured from simple static pictures to animations viewable from any eyepoint. However, while kinematics models are available, there are few biomechanical models available for estimating strength and motion patterns. Those, such as Crew Chief, that are available are based on strength measurements taken in specific positions. Johnson Space Center is pursuing a biomechanical model which will use strength data collected on single joints at two or three velocities to attempt to predict compound motions of several joint simultaneously and the resulting force at the end effector. Two lines of research are coming together to produce this result. One is an attempt to use optimal control theory to predict joint motion in complex motions, and another is the development of graphical representation of human capabilities. The progress to date in this research is described.
NASA Technical Reports Server (NTRS)
Gambrell, S. C.; Karr, Gerald R.
1993-01-01
Previous work using Photostress on TIG welded, heat treated specimens of 2219-T87 parent material and 2319 weld material indicated that behavior of the joint can be highly irregular and non-uniform. Welded joints 1.40 inches thick exhibited a totally non-uniform behavior through the weld thickness with the 'wide' side of the weld being much more ductile than the 'narrow' side. It is believed that this difference in behavior through the weld is, in part, caused by procedures used when laying the weld bead. Joints similar to weldments in references 1 and 2 are an integral part of the aft skirt of the SRB of the shuttle. Since the ultimate safety factor for the lower portion of the weld is below the minimum required safety factor, a photostress analysis of this lower portion will be conducted in the vicinity of the weld. A test program using photostress will be conducted in accordance with the project planning document entitled 'Photostress Evaluation Requirements for AFT Skirt Test Article No. 4'.
Product evaluation : Ruscoe 983 joint sealant
DOT National Transportation Integrated Search
1986-07-10
This report contains a product evaluation of Ruscoe's 983 joint sealant. Ruscoe 983 is an asphalt base single compound joint sealant. It contains an aluminum fortified adhesive and is designed for use on highway expansion joints, bridge joints, and r...
Federal Radionavigation Plan. Vol. IV. Radionavigation Research, Engineering and Development.
DOT National Transportation Integrated Search
1982-03-01
The second edition of the Federal Radionavigation Plan (FRP) has been jointly developed by the U.S. Departments of Defense and Transportation to ensure efficient use of resources and full protection of national interests. The plan sets forth the Fede...
National ITS Program Plan, Intelligent Transportation Systems, Synopsis
DOT National Transportation Integrated Search
THE PURPOSE OF THE NATIONAL ITS PROGRAM PLAN IS TO GUIDE THE DEVELOPMENT AND DEPLOYMENT OF INTELLIGENT TRANSPORTATION SYSTEMS (ITS) IN THE UNITED STATES. THIS, THE FIRST EDITION OF THE PLAN WAS A JOINT EFFORT OF ITS AMERICA AND THE UNITED STATES DEPA...
14 CFR 151.111 - Advance planning proposals: General.
Code of Federal Regulations, 2010 CFR
2010-01-01
... Engineering Proposals § 151.111 Advance planning proposals: General. (a) Each advance planning and engineering... application, under §§ 151.21(c) and 151.27, or both. (c) Each proposal must relate to planning and engineering... “Airport Activity Statistics of Certificated Route Air Carriers” (published jointly by FAA and the Civil...
2011-09-09
Chemical and Biological Defense Defense Threat Reduction Agency (DTRA)/Joint Science & Technology Office (JSTO) Dr. Alan Rudolph , Director, Chemical...Mr. Douglas W. Bryce 9:05 am – 9:45 am Dr. Alan Rudolph Director, Chemical and Biological Technologies Directorate, Defense Threat Reduction...Joint Science and Technology Office for Chemical and Biological Defense Dr. Alan S. Rudolph Mr. David K. Grimm Acting Heidi Shyu Joint Combat
De Filippis, Luigi Alberto Ciro; Serio, Livia Maria; Facchini, Francesco; Mummolo, Giovanni; Ludovico, Antonio Domenico
2016-01-01
A simulation model was developed for the monitoring, controlling and optimization of the Friction Stir Welding (FSW) process. This approach, using the FSW technique, allows identifying the correlation between the process parameters (input variable) and the mechanical properties (output responses) of the welded AA5754 H111 aluminum plates. The optimization of technological parameters is a basic requirement for increasing the seam quality, since it promotes a stable and defect-free process. Both the tool rotation and the travel speed, the position of the samples extracted from the weld bead and the thermal data, detected with thermographic techniques for on-line control of the joints, were varied to build the experimental plans. The quality of joints was evaluated through destructive and non-destructive tests (visual tests, macro graphic analysis, tensile tests, indentation Vickers hardness tests and t thermographic controls). The simulation model was based on the adoption of the Artificial Neural Networks (ANNs) characterized by back-propagation learning algorithm with different types of architecture, which were able to predict with good reliability the FSW process parameters for the welding of the AA5754 H111 aluminum plates in Butt-Joint configuration. PMID:28774035
Federal Register 2010, 2011, 2012, 2013, 2014
2012-12-05
... February 4, 2011. After private sector consultations and bilateral negotiations, the RCC released the Joint... bilateral negotiations, the RCC released the Joint Action Plan on Regulatory Cooperation on December 7, 2011...
Joint-Use Libraries: More Bang for Your Bucks.
ERIC Educational Resources Information Center
Kinsey, Sally; Honig-Bear, Sharon
1994-01-01
Discussion of joint-use, or cooperative, libraries focuses on a partnership between public and school libraries in Nevada. Highlights include benefits in enhanced services, user needs, location of facilities, administration and planning, financial issues, facility maintenance, remodelling, and signage. (LRW)
Rahman, Hafizur; Currier, Eric; Johnson, Marshall; Goding, Rick; Johnson, Amy Wagoner; Kersh, Mariana E
2017-11-01
Rotator cuff tears (RCTs) are one of the primary causes of shoulder pain and dysfunction in the upper extremity accounting over 4.5 million physician visits per year with 250,000 rotator cuff repairs being performed annually in the U.S. While the tear is often considered an injury to a specific tendon/tendons and consequently treated as such, there are secondary effects of RCTs that may have significant consequences for shoulder function. Specifically, RCTs have been shown to affect the joint cartilage, bone, the ligaments, as well as the remaining intact tendons of the shoulder joint. Injuries associated with the upper extremities account for the largest percent of workplace injuries. Unfortunately, the variable success rate related to RCTs motivates the need for a better understanding of the biomechanical consequences associated with the shoulder injuries. Understanding the timing of the injury and the secondary anatomic consequences that are likely to have occurred are also of great importance in treatment planning because the approach to the treatment algorithm is influenced by the functional and anatomic state of the rotator cuff and the shoulder complex in general. In this review, we summarized the contribution of RCTs to joint stability in terms of both primary (injured tendon) and secondary (remaining tissues) consequences including anatomic changes in the tissues surrounding the affected tendon/tendons. The mechanical basis of normal shoulder joint function depends on the balance between active muscle forces and passive stabilization from the joint surfaces, capsular ligaments, and labrum. Evaluating the role of all tissues working together as a system for maintaining joint stability during function is important to understand the effects of RCT, specifically in the working population, and may provide insight into root causes of shoulder injury.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Walters, C.H.; Lomax, T.J.; Poe, C.M.
1995-07-01
The Dallas Freeway/High-Occupany Vehicle Lane System Planning Study is a joint project in cooperation with the Texas Department of Transportation (TxDOT), Dallas Area Rapid Transit (DART), the North Central Texas Council of Governments (NCTCOG), and the Texas Transportation Institute (TTI). The intent of this effort is to assist in the development of an area-wide freeway/HOV system that recognizes implementation constraints (right-of-way and construction costs) and provides reasonable peak-hour operating conditions on all freeway facilities, while incorporating the long-range plans developed by TxDOT, DART, and NCTCOG. The proposed system is a set of recommendations to be considered and evaluated as partmore » of the development of the NCTCOG Mobility 2010 Plan Update, the long-range transportation plan for the Dallas area. HOV facilities are a significant part of the recommended system in the Dallas System Planning Study, and their implementation is important to the successful operation of the Dallas area transportation system in the future. The report, therefore, focuses on the recommended HOV improvements from the methodology.« less
Winning Before the Fight: An Armed Suasion Approach to Countering Near Peer Competition
2017-05-25
the risk of unintended escalation. This monograph also proposes a tailored set of principles , separate from the principles of joint operations...Suasion; Deterrence; Compellence; Armed Conflict; Conflict Continuum; Principles of Joint Operations. 16. SECURITY CLASSIFICATION OF: 17. LIMITATION...tailored set of principles , separate from the principles of joint operations, which allow a planning staff to balance achieving success with managing
Bridging the Technology Valley of Death in Joint Medical Development
2015-11-01
Force lieutenant colonel, is the Air Force Medical Support Agency Advanced Development Liaison Field Engineer in Falls Church, Virginia. Prusaczyk is...Awareness, communication and coordination may be mini - mal among Service S&T and AD programs. Joint Transition Planning Process A Joint Transition...Human Proof of Phase III NDA/BLA ling Approval, Launch Concept*** Launch Review Program Initiation Materiel Technology Engineering & Production
Federal Register 2010, 2011, 2012, 2013, 2014
2012-06-06
... pilot program, which was implemented through a series of rule filings by the Exchanges and FINRA. This... as a one-year pilot program in two Phases. Phase I of the Plan would be implemented immediately...
National ITS Program Plan, Intelligent Transportation Systems Volume II
DOT National Transportation Integrated Search
1995-03-01
THE PURPOSE OF THE NATIONAL ITS PROGRAM PLAN IS TO GUIDE THE DEVELOPMENT AND DEPLOYMENT OF INTELLIGENT TRANSPORTATION SYSTEMS (ITS) IN THE UNITED STATES. THIS, THE FIRST EDITION OF THE PLAN WAS A JOINT EFFORT OF ITS AMERICA AND THE UNITED STATES DEPA...
78 FR 65960 - Enhancing Agricultural Coexistence; Request for Public Input
Federal Register 2010, 2011, 2012, 2013, 2014
2013-11-04
... potential joint coexistence plans,\\3\\ i.e., voluntary written plans specifying farming practices (such as... communication, planning, and crop-specific practices to facilitate successful coexistence. What tools and... in diverse agricultural systems, we are interested in hearing what practices and activities that...
MR Imaging of Knee Arthroplasty Implants
Fritz, Jan; Lurie, Brett
2015-01-01
Primary total knee arthroplasty is a highly effective treatment that relieves pain and improves joint function in a large percentage of patients. Despite an initially satisfactory surgical outcome, pain, dysfunction, and implant failure can occur over time. Identifying the etiology of complications is vital for appropriate management and proper timing of revision. Due to the increasing number of knee arthroplasties performed and decreasing patient age at implantation, there is a demand for accurate diagnosis to determine appropriate treatment of symptomatic joints following knee arthroplasty, and for monitoring of patients at risk. Magnetic resonance (MR) imaging allows for comprehensive imaging evaluation of the tissues surrounding knee arthroplasty implants with metallic components, including the polyethylene components. Optimized conventional and advanced pulse sequences can result in substantial metallic artifact reduction and afford improved visualization of bone, implant-tissue interfaces, and periprosthetic soft tissue for the diagnosis of arthroplasty-related complications. In this review article, we discuss strategies for MR imaging around knee arthroplasty implants and illustrate the imaging appearances of common modes of failure, including aseptic loosening, polyethylene wear–induced synovitis and osteolysis, periprosthetic joint infections, fracture, patellar clunk syndrome, recurrent hemarthrosis, arthrofibrosis, component malalignment, extensor mechanism injury, and instability. A systematic approach is provided for evaluation of MR imaging of knee implants. MR imaging with optimized conventional pulse sequences and advanced metal artifact reduction techniques can contribute important information for diagnosis, prognosis, risk stratification, and surgical planning. ©RSNA, 2015 PMID:26295591
Federal Register 2010, 2011, 2012, 2013, 2014
2013-04-10
... the Securities Information Processors (``SIPs'' or ``Processors'') responsible for consolidation of... Plan. \\9\\ 17 CFR 242.603(b). The Plan refers to this entity as the Processor. \\10\\ See Section I(T) of... Euronext, to Elizabeth M. Murphy, Secretary, Commission, dated May 24, 2012. The Processors would also...
76 FR 22648 - Resolution Plans and Credit Exposure Reports Required
Federal Register 2010, 2011, 2012, 2013, 2014
2011-04-22
..., including associated services, functions and support that, in the view of the Covered Company or as jointly...-based Covered Company's overall contingency planning process, and information regarding the.... operations be linked to the contingency planning process of the foreign-based Covered Company? Process 1. Are...
Miniature Telerobots in Space Applications
NASA Technical Reports Server (NTRS)
Venema, S. C.; Hannaford, B.
1995-01-01
Ground controlled telerobots can be used to reduce astronaut workload while retaining much of the human capabilities of planning, execution, and error recovery for specific tasks. Miniature robots can be used for delicate and time consuming tasks such as biological experiment servicing without incurring the significant mass and power penalties associated with larger robot systems. However, questions remain regarding the technical and economic effectiveness of such mini-telerobotic systems. This paper address some of these open issues and the details of two projects which will provide some of the needed answers. The Microtrex project is a joint University of Washington/NASA project which plans on flying a miniature robot as a Space Shuttle experiment to evaluate the effects of microgravity on ground-controlled manipulation while subject to variable time-delay communications. A related project involving the University of Washington and Boeing Defense and Space will evaluate the effectiveness f using a minirobot to service biological experiments in a space station experiment 'glove-box' rack mock-up, again while subject to realistic communications constraints.
Development of EUV mask handling technology at MIRAI-Selete
NASA Astrophysics Data System (ADS)
Ota, Kazuya; Amemiya, Mitsuaki; Taguchi, Takao; Kamono, Takashi; Kubo, Hiroyoshi; Takikawa, Tadahiko; Usui, Yoichi; Suga, Osamu
2007-03-01
We, MIRAI-Selete, started a new EUV mask program in April, 2006. Development of EUV mask handling technology is one of the key areas of the program. We plan to develop mask handling technology and to evaluate EUV mask carriers using Lasertec M3350, a particle inspection tool with the defect sensitivity less than 50nm PSL, and Mask Protection Engineering Tool (named "MPE Tool"). M3350 is a newly developed tool based on a conventional M1350 for EUV blanks inspection. Since our M3350 has a blank flipping mechanism in it, we can inspect the front and the back surface of the blank automatically. We plan to use the M3350 for evaluating particle adders during mask shipping, storage and handling. MPE Tool is a special tool exclusively developed for demonstration of pellicleless mask handling. It can handle a mask within a protective enclosure, which Canon and Nikon have been jointly proposing1, and also, can be modified to handle other type of carrier as the need arises.
Publications - GMC 371 | Alaska Division of Geological & Geophysical
Property under Northwest Explorations joint venture ownership - (1970 to 2005) and plan of operation (2006 - (1970 to 2005) and plan of operation (2006): Alaska Division of Geological & Geophysical Surveys
Instability after total hip arthroplasty
Werner, Brian C; Brown, Thomas E
2012-01-01
Instability following total hip arthroplasty (THA) is an unfortunately frequent and serious problem that requires thorough evaluation and preoperative planning before surgical intervention. Prevention through optimal index surgery is of great importance, as the management of an unstable THA is challenging even for an experienced joints surgeon. However, even after well-planned surgery, a significant incidence of recurrent instability still exists. Non-operative management is often successful if the components are well-fixed and correctly positioned in the absence of neurocognitive disorders. If conservative management fails, surgical options include revision of malpositioned components; exchange of modular components such as the femoral head and acetabular liner; bipolar arthroplasty; tripolar arthroplasty; use of a larger femoral head; use of a constrained liner; soft tissue reinforcement and advancement of the greater trochanter. PMID:22919568
Salmingo, Remel Alingalan; Skytte, Tina Lercke; Traberg, Marie Sand; Mikkelsen, Lars Pilgaard; Henneberg, Kaj-Åge; Wong, Christian
2017-01-01
Perthes' disease is a destructive hip joint disorder characterized by malformation of the femoral head in young children. While the morphological changes have been widely studied, the biomechanical effects of these changes still need to be further elucidated. The objective of this study was to develop a method to investigate the biomechanical alterations in Perthes' disease by finite element (FE) contact modeling using MRI. The MRI data of a unilateral Perthes' case was obtained to develop the three-dimensional FE model of the hip joint. The stress and contact pressure patterns in the unaffected hip were well distributed. Elevated concentrations of stress and contact pressure were found in the Perthes' hip. The highest femoral cartilage von Mises stress 3.9 MPa and contact pressure 5.3 MPa were found in the Perthes' hip, whereas 2.4 MPa and 4.9 MPa in the healthy hip, respectively. The healthy bone in the femoral head of the Perthes' hip carries additional loads as indicated by the increase of stress levels around the necrotic-healthy bone interface. Identifying the biomechanical changes, such as the location of stress and contact pressure concentrations, is a prerequisite for the preoperative planning to obtain stress relief for the highly stressed areas in the malformed hip. This single-patient study demonstrated that the biomechanical alterations in Perthes' disease can be evaluated individually by patient-specific finite element contact modeling using MRI. A multi-patient study is required to test the strength of the proposed method as a pre-surgery planning tool.
Statistical atlas based extrapolation of CT data
NASA Astrophysics Data System (ADS)
Chintalapani, Gouthami; Murphy, Ryan; Armiger, Robert S.; Lepisto, Jyri; Otake, Yoshito; Sugano, Nobuhiko; Taylor, Russell H.; Armand, Mehran
2010-02-01
We present a framework to estimate the missing anatomical details from a partial CT scan with the help of statistical shape models. The motivating application is periacetabular osteotomy (PAO), a technique for treating developmental hip dysplasia, an abnormal condition of the hip socket that, if untreated, may lead to osteoarthritis. The common goals of PAO are to reduce pain, joint subluxation and improve contact pressure distribution by increasing the coverage of the femoral head by the hip socket. While current diagnosis and planning is based on radiological measurements, because of significant structural variations in dysplastic hips, a computer-assisted geometrical and biomechanical planning based on CT data is desirable to help the surgeon achieve optimal joint realignments. Most of the patients undergoing PAO are young females, hence it is usually desirable to minimize the radiation dose by scanning only the joint portion of the hip anatomy. These partial scans, however, do not provide enough information for biomechanical analysis due to missing iliac region. A statistical shape model of full pelvis anatomy is constructed from a database of CT scans. The partial volume is first aligned with the statistical atlas using an iterative affine registration, followed by a deformable registration step and the missing information is inferred from the atlas. The atlas inferences are further enhanced by the use of X-ray images of the patient, which are very common in an osteotomy procedure. The proposed method is validated with a leave-one-out analysis method. Osteotomy cuts are simulated and the effect of atlas predicted models on the actual procedure is evaluated.
Integration of Visual and Joint Information to Enable Linear Reaching Motions
NASA Astrophysics Data System (ADS)
Eberle, Henry; Nasuto, Slawomir J.; Hayashi, Yoshikatsu
2017-01-01
A new dynamics-driven control law was developed for a robot arm, based on the feedback control law which uses the linear transformation directly from work space to joint space. This was validated using a simulation of a two-joint planar robot arm and an optimisation algorithm was used to find the optimum matrix to generate straight trajectories of the end-effector in the work space. We found that this linear matrix can be decomposed into the rotation matrix representing the orientation of the goal direction and the joint relation matrix (MJRM) representing the joint response to errors in the Cartesian work space. The decomposition of the linear matrix indicates the separation of path planning in terms of the direction of the reaching motion and the synergies of joint coordination. Once the MJRM is numerically obtained, the feedfoward planning of reaching direction allows us to provide asymptotically stable, linear trajectories in the entire work space through rotational transformation, completely avoiding the use of inverse kinematics. Our dynamics-driven control law suggests an interesting framework for interpreting human reaching motion control alternative to the dominant inverse method based explanations, avoiding expensive computation of the inverse kinematics and the point-to-point control along the desired trajectories.
25. 'HANGAR SHEDS TRUSSES DETAILS; ARCHITECTURAL PLANS ...
25. 'HANGAR SHEDS - TRUSSES - DETAILS; ARCHITECTURAL PLANS - PLANT AREA; MODIFICATION CENTER NO. 1, DAGGETT, CALIFORNIA.' Sections and details of trusses, ironwork, and joints, as modified to show ridge joint detail. As built. This blueline also shows the fire suppression system, added in orange pencil for 'Project 13: Bldgs. T-30, T-50, T-70, T-90' at a later, unspecified date. Contract no. W509 Eng. 2743; File no. 555/84, revision B, dated August 24, 1942. No sheet number. - Barstow-Daggett Airport, Hangar Shed No. 4, 39500 National Trails Highway, Daggett, San Bernardino County, CA
Thurber, Raymond; Read, Linda Eklof
2008-01-01
This article describes how education specialists from a 359-bed acute care hospital in the Northeast developed and implemented a comprehensive educational plan to prepare all staff members on the Joint Commission on Accreditation of Healthcare Organizations (JCAHO) tracer methodology and upcoming triennial survey. This methodology can be utilized by staff development educators in any setting to not only prepare staff members for a successful JCAHO survey but also to meet or exceed JCAHO standards in one's everyday job.
Lipsky, Alyson B; Gribble, James N; Cahaelen, Linda; Sharma, Suneeta
2016-01-01
ABSTRACT In global health, partnerships between practitioners and policy makers facilitate stakeholders in jointly addressing those issues that require multiple perspectives for developing, implementing, and evaluating plans, strategies, and programs. For family planning, costed implementation plans (CIPs) are developed through a strategic government-led consultative process that results in a detailed plan for program activities and an estimate of the funding required to achieve an established set of goals. Since 2009, many countries have developed CIPs. Conventionally, the CIP approach has not been defined with partnerships as a focal point; nevertheless, cooperation between key stakeholders is vital to CIP development and execution. Uganda launched a CIP in November 2014, thus providing an opportunity to examine the process through a partnership lens. This article describes Uganda’s CIP development process in detail, grounded in a framework for assessing partnerships, and provides the findings from 22 key informant interviews. Findings reveal strengths in Uganda’s CIP development process, such as willingness to adapt and strong senior management support. However, the evaluation also highlighted challenges, including district health officers (DHOs), who are a key group of implementers, feeling excluded from the development process. There was also a lack of planning around long-term partnership practices that could help address anticipated execution challenges. The authors recommend that future CIP development efforts use a long-term partnership strategy that fosters accountability by encompassing both the short-term goal of developing the CIP and the longer-term goal of achieving the CIP objectives. Although this study focused on Uganda’s CIP for family planning, its lessons have implications for any policy or strategy development efforts that require multiple stakeholders to ensure successful execution. PMID:27353621
Economic viability of access broadband multiservice networks
NASA Astrophysics Data System (ADS)
Castelli, Francesco; Dammicco, Giacinto; Mocci, Ugo
1995-02-01
In this paper the economic viability of alternative architectures for optical access networks providing broad band services to different subscriber classes in a metropolitan environment, is investigated by a specific tool, NEVE (Network Economic Viability Evaluator), developed for broad band multiservice network planning, service evolutionary scenarios assessment, evaluation of tariff strategies and other actions taken at stimulating the demand growth. As the viability target can be achieved in different ways, different studies can be carried out by NEVE. In the paper some of them are discussed, particularly the ones addressed: to evaluate the impact on viability of alternative service scenarios; to determine the critical mass of broad band subscribers and the critical joint service adoption cost; to evaluate cross subsidiary policies among different subscriber classes and services; to perform sensitivity analysis with respect to variations of demand parameters and tariffs.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Livingston, Roderick
1999-07-01
This project was designed to help develop the US Initiative on Joint Implementation activities in Eastern Africa. It has been communicated in meetings with representatives from the Ministry of Environment of Tanzania and the consultant group that developed Tanzania's National Climate Change Action Plan, the Centre for Energy, Environment, Science and Technology, that this project fits very well with the developmental and environmental goals of the Government of Tanzania. The goal of the Activities Implemented Jointly ruminant livestock project is to reduce ruminant methane emissions in Eastern Africa. The project plans a sustainable cattle multiplication unit (CMU) at Mabuki Ranchmore » in the Mwanza Region of Tanzania. This CMU will focus on raising genetically improved animals to be purchased by farmers, developmental organizations, and other CMUs in Tanzania. Through the purchase of these animals farmers will raise their income generation potential and reduce ruminant methane emissions.« less
24 CFR 570.308 - Joint requests.
Code of Federal Regulations, 2011 CFR
2011-04-01
...) OFFICE OF ASSISTANT SECRETARY FOR COMMUNITY PLANNING AND DEVELOPMENT, DEPARTMENT OF HOUSING AND URBAN... inclusion of the metropolitan city as a part of the urban county for purposes of planning and implementing a... metropolitan city shall be considered a part of the urban county for purposes of program planning and...
24 CFR 570.308 - Joint requests.
Code of Federal Regulations, 2010 CFR
2010-04-01
...) OFFICE OF ASSISTANT SECRETARY FOR COMMUNITY PLANNING AND DEVELOPMENT, DEPARTMENT OF HOUSING AND URBAN... inclusion of the metropolitan city as a part of the urban county for purposes of planning and implementing a... metropolitan city shall be considered a part of the urban county for purposes of program planning and...
Developmental Planning: An Introduction for Parents
ERIC Educational Resources Information Center
Noland, Jim
2009-01-01
"Developmental Planning" is the thinking process of using developmental milestones as a general basis for planning and predicting needs for the child within the early years. It considers the time frames associated with normal development across all facets of the child's development. The areas include bone and joint development, movement, sensory…
75 FR 41157 - Stanford University Habitat Conservation Plan; Extension of Comment Period
Federal Register 2010, 2011, 2012, 2013, 2014
2010-07-15
... Fish and Wildlife Service RIN 0648-XX52 Stanford University Habitat Conservation Plan; Extension of... extending the comment period for our joint request for comments on the Stanford University Habitat... issued Stanford University Habitat Conservation Plan, a DEIS for Authorization of Incidental Take and...
Evaluation of narrow transverse contraction joints in jointed plain concrete pavements.
DOT National Transportation Integrated Search
2006-03-01
This report presents the results of a research project conducted at the Louisiana Transportation Research Center (LTRC) to evaluate the performance of narrow transverse contraction joints to control cracking in jointed plain concrete pavements. In ad...
L-Band System Engineering - Concepts of Use, Systems Performance Requirements, and Architecture
NASA Technical Reports Server (NTRS)
Henriksen, Stephen; Zelkin, Natalie
2011-01-01
This document is being provided as part of ITT s NASA Glenn Research Center Aerospace Communication Systems Technical Support (ACSTS) contract NNC05CA85C, Task 7: New ATM Requirements-Future Communications, C-band and L-band Communications Standard Development. Task 7 was motivated by the five year technology assessment performed for the Federal Aviation Administration (FAA) under the joint FAA-EUROCONTROL cooperative research Action Plan (AP-17), also known as the Future Communications Study (FCS). It was based on direction provided by the FAA project-level agreement (PLA FY09_G1M.02-02v1) for "New ATM Requirements-Future Communications." Task 7 was separated into two distinct subtasks, each aligned with specific work elements and deliverable items. Subtask 7-1 addressed C-band airport surface data communications standards development, systems engineering, test bed development, and tests/demonstrations to establish operational capability for what is now referred to as the Aeronautical Mobile Airport Communications System (AeroMACS). Subtask 7-2, which is the subject of this report, focused on preliminary systems engineering and support of joint FAA/EUROCONTROL development and evaluation of a future L-band (960 to 1164 MHz) air/ground (A/G) communication system known as the L-band digital aeronautical communications system (L-DACS), which was defined during the FCS. The proposed L-DACS will be capable of providing ATM services in continental airspace in the 2020+ timeframe. Subtask 7-2 was performed in two phases. Phase I featured development of Concepts of Use, high level functional analyses, performance of initial L-band system safety and security risk assessments, and development of high level requirements and architectures. It also included the aforementioned support of joint L-DACS development and evaluation, including inputs to L-DACS design specifications. Phase II provided a refinement of the systems engineering activities performed during Phase I, along with continued joint FAA/EUROCONTROL L-DACS development and evaluation support.
Sitewide monitoring at Agra, Kansas, June 2009.
DOE Office of Scientific and Technical Information (OSTI.GOV)
LaFreniere, L. M.; Environmental Science Division
In 1985, carbon tetrachloride was discovered in the groundwater at Agra, Kansas, during routine sampling of public water supply wells. Two of Agra's four public water supply wells contained low but detectable levels of carbon tetrachloride; the concentrations in wells PWS-3 and PWS-4 exceeded the maximum contaminant level. These wells were removed from service in 1986, although they remain available for uses other than drinking water. Other public wells, outside the area of contamination, supply drinking water for the city of Agra. In 1987-2005, the Kansas Department of Health and Environment (KDHE) and the Commodity Credit Corporation of the U.S.more » Department of Agriculture (CCC/USDA) conducted investigations to delineate the contaminant plume and to identify source areas for the contamination - which results from the past use of grain fumigants containing carbon tetrachloride. Source areas were identified on the former CCC/USDA grain storage facility property and on the Producers Agricultural Marketing Association, Inc., property located to the south (Argonne 2006). The contaminant plume extends to the southeast, toward well PWS-3, from the identified source areas. Both the CCC/USDA and Pro-Ag Marketing are currently implementing KDHE-approved interim measures (IMs). To address the contamination identified on its former property, the CCC/USDA is implementing a source control IM consisting of large-diameter boreholes (LDBs) coupled with soil vapor extraction (SVE) and air sparging (AS). Pro-Ag Marketing plans to use groundwater extraction to address the downgradient plume. The CCC/USDA and Pro-Ag completed installation of the two interim measures in May 2009 and August 2009, respectively. The performance and assessments of the effectiveness of the IMs are being reported separately by the responsible entities. As part of the IM process, the KDHE (2008) requested the development of a joint sitewide groundwater monitoring plan to allow periodic assessment of the effectiveness of the separate IMs being implemented by the CCC/USDA and Pro-Ag, through monitoring of the level of contamination and the resulting change in both the extent and internal configuration of the downgradient plume. A Joint Work Plan for Sitewide Monitoring was developed by the CCC/USDA through its technical consultant, Argonne National Laboratory, and was reviewed, approved, and signed by Pro-Ag Marketing and subsequently submitted to the KDHE on May 12, 2009. The KDHE (2009a) provided comments on the Joint Work Plan on May 27, 2009, requesting submission of a revised version. To minimize delays, the KDHE allowed the CCC/USDA to proceed with the scheduled annual sampling proposed in the Joint Work Plan. The sampling was to be conducted according to the previously approved low-flow sampling methodology (Argonne 2009). Argonne conducted the first annual sampling event for the CCC/USDA on June 15-16, 2009. The finalized, signed version of the Joint Work Plan provided to the KDHE on November 9, 2009, is in Appendix A. Table 1.1 lists the monitoring and public water supply wells to be sampled under the Joint Work Plan, plus the wells being sampled to monitor the respective IMs. The entity responsible for each monitoring element is indicated, along with well completion dates and well registration numbers. The subject of this report is the initial sitewide groundwater sampling event that occurred on June 15-16, 2009, under the Joint Work Plan.« less
Investigating the Effects of Planning on L2 Text Chat Performance
ERIC Educational Resources Information Center
Hsu, Hsiu-Chen
2012-01-01
Over the last decade, a small body of SLA research has examined the effects of task planning on L2 production. This research has revealed positive results concerning the effect of pre-task and online planning on oral and written production. However, no studies to date have investigated the joint effects of pre-task and online planning. In…
The U.S. Environmental Protection Agency (EPA) is seeking public comment on the EPA’s proposal indicating no further action is needed for multiple Training Areas on the Camp Edwards portion of Joint Base Cape Cod (JBCC).
75 FR 53716 - Invitation for Membership on Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2010-09-01
... successful completion of Joint Board examinations in basic actuarial mathematics and methodology and in actuarial mathematics and methodology relating to pension plans qualifying under ERISA. The Joint Board, the... Act of 1974 (ERISA), is responsible for the enrollment of individuals who wish to perform actuarial...
78 FR 55338 - ITS Joint Program Office; Notice of Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2013-09-10
... DEPARTMENT OF TRANSPORTATION Research and Innovative Technology Administration ITS Joint Program Office; Notice of Meeting AGENCY: Research and Innovative Technology Administration (RITA), U.S. Department of Transportation. ACTION: Notice. This notice announces the cancellation of the Connected Vehicle Planning and Policy Stakeholder Meeting. Th...
Spherical Joint Piston and Connecting Rod Developed
NASA Technical Reports Server (NTRS)
1996-01-01
Under an interagency agreement with the Department of Energy, the NASA Lewis Research Center manages a Heavy-Duty Diesel Engine Technology (HDET) research program. The overall program objectives are to reduce fuel consumption through increased engine efficiency, reduce engine exhaust emissions, and provide options for the use of alternative fuels. The program is administered with a balance of research contracts, university research grants, and focused in-house research. The Cummins Engine Company participates in the HDET program under a cost-sharing research contract. Cummins is researching and developing in-cylinder component technologies for heavy-duty diesel engines. An objective of the Cummins research is to develop technologies for a low-emissions, 55-percent thermal efficiency (LE-55) engine. The best current-production engines in this class achieve about 46-percent thermal efficiency. Federal emissions regulations are driving this technology. Regulations for heavy duty diesel engines were tightened in 1994, more demanding emissions regulations are scheduled for 1998, and another step is planned for 2002. The LE-55 engine emissions goal is set at half of the 1998 regulation level and is consistent with plans for 2002 emissions regulations. LE-55 engine design requirements to meet the efficiency target dictate a need to operate at higher peak cylinder pressures. A key technology being developed and evaluated under the Cummins Engine Company LE-55 engine concept is the spherical joint piston and connecting rod. Unlike conventional piston and connecting rod arrangements which are joined by a pin forming a hinged joint, the spherical joint piston and connecting rod use a ball-and-socket joint. The ball-and-socket arrangement enables the piston to have an axisymmetric design allowing rotation within the cylinder. The potential benefits of piston symmetry and rotation are reduced scuffing, improved piston ring sealing, improved lubrication, mechanical and thermal load symmetry, reduced bearing stresses, reduced running clearances, and reduced oil consumption. The spherical joint piston is a monolithic, squeeze-cast, fiber-reinforced aluminum piston. The connecting rod has a ball end that seats on a spherical saddle within the piston and is retained by a pair of aluminum bronze holder rings. The holder rings are secured by a threaded ring that mates with the piston. As part of the ongoing research and development activity, the Cummins Engine Company successfully completed a 100-hr test of the spherical joint piston and connecting rod at LE- 55 peak steady-state engine conditions. In addition, a 100-hr transient cycle test that varied engine conditions between LE-55 no-load and LE-55 full-load was successfully completed.
Comprehensive treatment of temporomandibular joint disorders.
Navrátil, Leos; Navratil, Vaclav; Hajkova, Simona; Hlinakova, Petra; Dostalova, Tatjana; Vranová, Jana
2014-01-01
Changing lifestyles, decreasing physical activity, which is increasing the number of degenerative joint diseases of various etiology, and certain dental procedures are increasing the number of patients complaining of pain in their temporomandibular joints. The aim of the study was to assess the benefits of comprehensive physiotherapy sessions in order to decrease the number of temporomandibular joint problems, thereby improving the patient's quality of life. An examination by a dentist determined each patient's treatment plan, which consisted of a medical exam, physical therapy and education. Each form of treatment was applied 10 times at intervals of 7-14 days. The main goal of the therapeutic physical education was to redress the muscle imbalance in the mandibular joint. This was achieved by restoring balance between the masticatory muscles, along with releasing the spastic shrouds found in the masticatory muscles. The aim of education was to teach the patient exercises focused on the temporomandibular joint and masticatory muscles. The intensity of the exercises and their composition were individually adjusted and adapted to their current state. Physical therapy consisted of the application of pulsed magnetic therapy, laser therapy, and non-invasive positive thermotherapy. The above procedure was conducted on a therapeutic group of 24 patients (3 men and 20 women). In the course of therapy, there were no complications, and all patients adhered to the prescribed regime. None reported any side effects. The mean treatment duration was 123 +/- 66 days. The outcome of the therapy was evaluated as described in the methodology, the degree of pain affecting the joint, and the opening ability of the mouth. In both parameters, there was a significant decline in patient pain. In a study devoted to tactics of rehabilitation treatment for temporomandibular joint disorders, the need for comprehensive long-term therapy, involving education, and learning proper chewing habits was made apparent for recovery and pain reduction. A priority in physical therapy, and combinations of pulsed magnetic therapy and hyperthermia-positive peloids, are also beneficial.
Rewiring Warfighters for Joint Mindedness: Solutions for Joint Education in the 21st Century
2010-06-01
begins " developing concepts to test the model or theory or plan for a forthcoming experience.൱ ELT provides a mechanism to reduce cognitive ...solving a lack of jointness requires a new way of thinking that focuses on developing cognitive symmetry among officers of different services... developing cognitive symmetry using P2C. Perception is the second P2C element. Creating cognitive symmetry through perception and not misperception
Fires, A Joint Professional Bulletin for US Field & Air Defense Artillerymen. March-April 2008
2008-04-01
actions. However, if the effects synchronization division were not added to the lineup , just the teaming of joint fires division and IO division still...ADAFCO would be the liaison between the two Services who coordinates fires and facilitates track identification thus preventing fratricide. Joint...decisions to be made based on current air users versus planned control measures. Interoperability. Identification is a key feature that enables AC2 nodes
A Stitch in Time Saves Nine: A Comprehensive Conflict Prevention Strategy
2010-04-02
prevention plan, has led to ad-hoc conflict prevention. 1 Charles F. Wald , "The Phase Zero Campaign," JFQ: Joint Force Quarterly, no. 43 (10...14. 24 Joint Chiefs of Staff, Joint Operations, 2008), IV 27-28. 25 Wald , The Phase Zero Campaign, 73. 26 Ibid., 73. 27 secure...Unconventional Threats and Capabilities. Testimony of Michael Lund and Dr. Lisa Schrich on the Roles of Non-Military Programs within a Comprehensive
Path planning for assembly of strut-based structures. Thesis
NASA Technical Reports Server (NTRS)
Muenger, Rolf
1991-01-01
A path planning method with collision avoidance for a general single chain nonredundant or redundant robot is proposed. Joint range boundary overruns are also avoided. The result is a sequence of joint vectors which are passed to a trajectory planner. A potential field algorithm in joint space computes incremental joint vectors delta-q = delta-q(sub a) + delta-q(sub c) + delta-q(sub r). Adding delta-q to the robot's current joint vector leads to the next step in the path. Delta-q(sub a) is obtained by computing the minimum norm solution of the underdetermined linear system J delta-q(sub a) = x(sub a) where x(sub a) is a translational and rotational force vector that attracts the robot to its goal position and orientation. J is the manipulator Jacobian. Delta-q(sub c) is a collision avoidance term encompassing collisions between the robot (links and payload) and obstacles in the environment as well as collisions among links and payload of the robot themselves. It is obtained in joint space directly. Delta-q(sub r) is a function of the current joint vector and avoids joint range overruns. A higher level discrete search over candidate safe positions is used to provide alternatives in case the potential field algorithm encounters a local minimum and thus fails to reach the goal. The best first search algorithm A* is used for graph search. Symmetry properties of the payload and equivalent rotations are exploited to further enlarge the number of alternatives passed to the potential field algorithm.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Zhang, Xiaoliang; Stauffer, Philip H.
This effort is designed to expedite learnings from existing and planned large demonstration projects and their associated research through effective knowledge sharing among participants in the US and China.
EPA EMERGENCY PLANNING TOOLBOX
EPA's Office of Research and Development and Office of Water/Water Security Division have jointly developed a Response Protocol Toolbox (RPTB) to address the complex, multi-faceted challenges of a water utility's planning and response to intentional contamination of drinking wate...
Intelligent Vehicle Initiative: Business Plan
DOT National Transportation Integrated Search
1997-11-01
The U.S. Department of Transportation (USDOT) is embarking on a new program called the Intelligent Vehicle Initiative (IVI). The USDOT intends to jointly define the program plan and conduct the IVI in cooperation with the motor vehicle, trucking, and...
Project Helios-A. [mission planning for solar probe
NASA Technical Reports Server (NTRS)
1974-01-01
The Helios-A solar probe which will fly within 28 million miles of the sun is described as a joint American and German project. The spacecraft and instrument designs, planned experiments, and mission are briefly discussed.
Global Government Health Partners' Forum 2006: eighteen months later.
Foster, J; Guisinger, V; Graham, A; Hutchcraft, L; Salmon, M
2010-06-01
The challenge of global health worker shortages, particularly among nurses, has been the topic of numerous forums over the last several years. Nevertheless, there has been little attention given to the roles of government chief nursing and medical officers as key partners in addressing health worker shortages. This partnership and its potential impact on the adequacy of the global health workforce was the focus of the most recent Global Government Health Partners (GGHP) Forum held in November 2006 in Atlanta, Georgia, USA. This forum was uniquely designed to create a context for government chief nursing officers and chief medical officers to engage in a joint learning and planning experience focused on positioning their leadership to impact health workforce issues. This article describes an 18-month follow-up evaluation of the outcomes of the GGHP. The purpose of the evaluation was to assess the impact of the forum experience on the actions of participants based on the country-level plans they produced at the forum. This important feedback is intended to inform the design of future partnered global forums and gain insights into the utility of forum-based action plans. The evaluation process itself has served as an opportunity for the engagement of university faculty, students and staff in a global service learning experience. The outcomes of this evaluation indicate that important progress has been made by countries whose leadership was involved in the forum, and was also an important learning activity for those participating in the conduct of the study.
75 FR 66780 - Suisun Marsh Habitat Management, Preservation, and Restoration Plan, California
Federal Register 2010, 2011, 2012, 2013, 2014
2010-10-29
... joint lead agencies, and the State of California Department of Fish and Game (DFG), acting as the... comprehensive 30-year plan designed to address various conflicts regarding use of resources within approximately... comprehensive plan designed to address the various conflicts regarding use of Marsh resources, with the focus on...
Information for a Vocational Education Plan. Joint Vocational School Districts.
ERIC Educational Resources Information Center
Ohio State Univ., Columbus.
Providing information for simulation activity, the materials in this document are intended to help train administrators in the utilization of a set of reporting/planning forms developed as a statewide model for local school district use in vocational education planning and development in Ohio. The information is presented in three parts: state…
Stability and Change in Mother-Child Planning over Middle Childhood
ERIC Educational Resources Information Center
Gauvain, Mary; Perez, Susan M.; Reisz, Z.
2018-01-01
This longitudinal research examines maternal and child behaviors during joint planning over a 3-year period of middle childhood. 118 mother-child dyads were observed once a year beginning when the children were 8 years of age. Coding focused on mother and child planning behaviors, maternal instructional support, and child task engagement.…
78 FR 51711 - North Pacific Fishery Management Council (NPFMC); Public Meetings
Federal Register 2010, 2011, 2012, 2013, 2014
2013-08-21
... Sea/Aleutian Islands (BS/AI) groundfish plan teams will meet in Seattle, WA. DATES: The meetings will... Science Center, 7600 Sand Point Way NE., Building 4, National Marine Mammal Lab Room 2039 (GOA Plan Team) and Traynor Room 2076 (BS/AI Plan Team, Joint meeting), Seattle, WA. Council address: North Pacific...
2009-11-01
Technology Demonstration of the Joint Network Defence and Management System (JNDMS) Brett Trask; Novembre 2009. Dès le départ, nous avons mis au point le... 13 5.1 System Specification... 13 5.1.1 Scope ............................................................................................................. 13 5.2 Security
Productive Tension in Joint Planning: A Constructivist Model
2007-11-06
Habits of Highly Effective People . Provo, UT: Covey Leadership Center. “Department of Defense Dictionary of Military and Associated Terms.” Joint...Amicus Curiae in Support of Lee Bolinger.” U.S. Supreme Court document No. 02-241, 02-516. 19 February 2003. Covey, Stephen. (1997) The 7
Report of the Joint Accounting Group.
ERIC Educational Resources Information Center
Western Interstate Commission for Higher Education, Boulder, CO. National Center for Higher Education Management Systems.
The Joint Accounting Group (JAG) has as its primary goal to develop a capability to provide uniform transactional finance data at the institutional level. Such data should effectively meet the needs of public reporting, institutional financial management, and program planning. The group believes that the attainment of this goal requires uniformly…
32 CFR 644.4 - Reservoir projects.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 32 National Defense 4 2014-07-01 2013-07-01 true Reservoir projects. 644.4 Section 644.4 National... HANDBOOK Project Planning Civil Works § 644.4 Reservoir projects. (a) Joint land acquisition policy for reservoir projects. The joint policies of the Department of the Interior and the Department of the Army...
32 CFR 644.4 - Reservoir projects.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 32 National Defense 4 2013-07-01 2013-07-01 false Reservoir projects. 644.4 Section 644.4 National... HANDBOOK Project Planning Civil Works § 644.4 Reservoir projects. (a) Joint land acquisition policy for reservoir projects. The joint policies of the Department of the Interior and the Department of the Army...
32 CFR 644.4 - Reservoir projects.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 32 National Defense 4 2012-07-01 2011-07-01 true Reservoir projects. 644.4 Section 644.4 National... HANDBOOK Project Planning Civil Works § 644.4 Reservoir projects. (a) Joint land acquisition policy for reservoir projects. The joint policies of the Department of the Interior and the Department of the Army...
Controlling Distributed Planning
NASA Technical Reports Server (NTRS)
Clement, Bradley; Barrett, Anthony
2004-01-01
A system of software implements an extended version of an approach, denoted shared activity coordination (SHAC), to the interleaving of planning and the exchange of plan information among organizations devoted to different missions that normally communicate infrequently except that they need to collaborate on joint activities and/or the use of shared resources. SHAC enables the planning and scheduling systems of the organizations to coordinate by resolving conflicts while optimizing local planning solutions. The present software provides a framework for modeling and executing communication protocols for SHAC. Shared activities are represented in each interacting planning system to establish consensus on joint activities or to inform the other systems of consumption of a common resource or a change in a shared state. The representations of shared activities are extended to include information on (1) the role(s) of each participant, (2) permissions (defined as specifications of which participant controls what aspects of shared activities and scheduling thereof), and (3) constraints on the parameters of shared activities. Also defined in the software are protocols for changing roles, permissions, and constraints during the course of coordination and execution.
Joint geriatric and old-age psychiatric wards in the U.K., 1940s-early 1990s: a historical study.
Hilton, Claire
2014-10-01
This study aims to investigate the history of joint geriatric-psychiatric units. For policy making and planning of high-quality clinical service models, clinical and social contexts need to be considered. Longitudinal, contextual information can be provided by historical analyses, including the successes and failures of earlier, similar services. Historical analyses complement clinical, randomised controlled studies and may contribute to ensuring optimum outcomes for future schemes. Standard historical methodology was used, including searching published sources and institutional and personal archives and conducting a 'witness seminar' and individual oral history interviews. Proposals to create joint units have existed since 1947. Most clinically successful units were led by enthusiastic, dedicated clinicians. Joint units had the potential to provide appropriate assessment and treatment for patients with multiple disorders and education for staff and students. Joint units never became widespread. Reasons for the limited success of joint geriatric-psychiatric units might have included personalities of individuals, administrative boundaries separating geriatrics and medicine, unequal numbers of geriatricians and old-age psychiatrists, varying professional ideologies about the meaning of 'integrated' services, lack of reciprocity for each other's inpatients and lack of government support. Identified stumbling blocks need to be considered when planning joint clinical schemes. If current research indicates benefits of integrated wards for patients and their families, there needs to be ways to ensure that personal factors and fashions of management or government re-prioritisation will not lead to their premature termination. Copyright © 2014 John Wiley & Sons, Ltd.
Ey-Chmielewska, H
1998-01-01
The author presents an attempt of using ultrasonographic technique in diagnosis, planning and observation of treatment results of temporo-mandibular joint pain dysfunctions. Temporo-mandibular joint pain dysfunctions are interchangeably also called temporo-mandibular joint functional disorders. The assessment of pain symptoms in temporo-mandibular joint dysfunctions pain symptoms is principally based on a subjective estimation by the examining practitioner. There is no univocal definition of the disease or a simple index evidencing important symptoms in decision making. Additionally X-ray technique examinations, being hitherto used, in early stages of the disorder do not allow to diagnose it, and are also burdensome to a patient. The aim of this study was to confirm visibility of anatomical elements of the temporo-mandibular joint in an ultrasound examination, assess the mobility of the articular disc before, during and after prosthetic treatment with and without the use of ultrasound technique, and to determine the period of time necessary to obtain a therapeutic effect. The study material consisted of 180 patients, 128 women and 52 men, aged 20 to 60 years, treated by applying prostheses because of temporo-mandibular joint pain dysfunction, in the Department of Prosthetic Dentistry of the Pomeranian Medical Academy. The patients were divided into 2 groups, control and study group. The control group consisted of 90 patients, 63 women and 27 men. In this group prosthetic treatment planning and observation of results was based on a subjective estimation of the practitioner. The study group here comprised 90 patients, 65 women and 25 men, aged 26 to 60 years. In this group prosthetic treatment planning and observation of treatment results were carried on with the use of ultrasound technique. Data from both groups concerning history, results of examinations carried out by ultrasound technique, and the assessment of ultrasound examination were noted on standard examination records used in the Department of Prosthetic Dentistry. For the need of this study an own ultrasound technique was elaborated which allowed for analyzing the ultrasound image in a static situation and during functioning. The ultrasound examination was accomplished with the use of Acuson 128 XP apparatus, linear probe 7.5 MHz. In both groups prosthetic treatment was carried out using different prosthetic methods such as: splints, occlusal adjustment on fixed prosthetic restorations in therapeutical occulus et height in abnormal occlusion. In the study group the therapeutical occulus height was determined under the control of ultrasound technique. Statistical analysis of the obtained results was performed with the use of chi-square test and chi-square test with Yates correction. On the basis of the accomplished study it has been determined that the ultrasound technique makes it possible to visualize morphological elements and facilitates functional observation of the temporo-mandibular joint, articular disc, mandibular condyle and lateral pterygoid muscle in a degree which allows for planning the treatment and the observation of results (Tab. 1-6). The use of ultrasound technique in determining spatial position of the mandible in temporo-mandibular joint permitted to objectively estimate examination results in the study group. A small number of publications on the use of ultrasound technique in functional examination of the temporo-mandibular joint accessible in foreign literature and general reference on the subject in Polish literature do not allow for an objective comparison of obtained study results.
Aoyama, Shigeru; Kino, Koji; Shibuya, Toshihisa; Sato, Fumiaki; Kobayashi, Akiko; Yoshitake, Hiroyuki; Haketa, Tadasu; Amamori, Yoko; Ishikawa, Takayuki; Yoshida, Nahoko; Amagasa, Teruo
2003-09-01
We have carried out temporary silicone implants after diskectomies or arthroplasties in temporomandibular joint surgeries to avoid postoperative adhesion and to maintain articular space. We evaluated 19 joints in 15 patients who had received dacron-reinforced silicone implant after silicone sheet removal through follow-up for at least 6 months. The cases included temporomandibular joint disorder (10 joints in 9 patients), psoriatic arthritis (2 joints in 1 patient), ankylosis (4 joints in 3 patients) and synovial chondromatosis (2 joints in 2 patients). On the basis of the criteria of temporomandibular dysfunction for the results, they were classified as bad (4 patients). It is thought that factors other than the implant are related to the bad results in the postoperative evaluation. In this study, lymphadenopathy induced by exfoliated silicone debris could not be confirmed. The temporary silicone implant in the temporomandibular joint was thought to be useful.
British firms mark progress off Viet Nam
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1992-11-23
British companies are making more inroads in exploring for oil and gas off Viet Nam. British Gas plc won a 25 year production sharing contract for a license off southern Viet Nam in the South China Sea. Meantime, London independent Lasmo plc started seismic surveys on the block adjoining the British Gas block. Separately, Thailand and Viet Nam have reached agreement to jointly explore for and develop oil and gas found in waters claimed by both countries. Plans call for the two countries to draw up joint development plans covering oil and gas resources in the southeastern fringe of themore » Gulf of Thailand. Bangkok officials say they would have preferred to delineate maritime boundaries with Hanoi, but opted for the joint development accord, noting that Thailand and Malaysia had taken 12 years to resolve a similar dispute.« less
The National Survey of Psychiatric Morbidity among prisoners and the future of prison healthcare.
Coid, Jeremy; Bebbington, Paul; Jenkins, Rachel; Brugha, Traolach; Lewis, Glyn; Farrell, Michael; Singleton, Nicola
2002-07-01
It has long been known that psychiatric disorders are highly prevalent among prisoners (Coid, 1984; Gunn et al., 1991; Maden et al., 1995; Joukamaa, 1995; Bland et al., 1998; Lamb and Weinberger, 1998). However, the Survey of Psychiatric Morbidity Among Prisoners in England and Wales (Singleton et al., 1998) represents a considerable advance on earlier surveys. By using the same standardized psychiatric assessment procedures, and similar questions on medication, service use and social functioning, its findings can be compared with previous national surveys of adults living in private households (Meltzer et al., 1995), residents in institutions (Meltzer et al., 1996), homeless persons (Gill et al., 1996), and with the forthcoming household survey in England, Wales and Scotland. It should also inform the future organisation of healthcare for prisoners, following recent recommendations from a joint Home Office/Department of Health Working Party that Health Authorities must work with prisons in their catchment areas to carry out joint health needs assessments, agree prison healthcare improvement strategies and jointly plan and commission services (HM Prison Service and NHS Executive 1999). The ultimate test of the survey will be whether it provides a benchmark to evaluate the future effectiveness of the new policy changes.
Robotic acquisition programs: technical and performance challenges
NASA Astrophysics Data System (ADS)
Thibadoux, Steven A.
2002-07-01
The Unmanned Ground Vehicles/ Systems Joint Project Office (UGV/S JPO) is developing and fielding a variety of tactical robotic systems for the Army and Marine Corps. The Standardized Robotic System (SRS) provides a family of common components that can be installed in existing military vehicles, to allow unmanned operation of the vehicle and its payloads. The Robotic Combat Support System (RCSS) will be a medium sized unmanned system with interchangeable attachments, allowing a remote operator to perform a variety of engineering tasks. The Gladiator Program is a USMC initiative for a small to medium sized, highly mobile UGV to conduct scout/ surveillance missions and to carry various lethal and non-lethal payloads. Acquisition plans for these programs require preplanned evolutionary block upgrades to add operational capability, as new technology becomes available. This paper discusses technical and performance issues that must be resolved and the enabling technologies needed for near term block upgrades of these first generation robotic systems. Additionally, two Joint Robotics Program (JRP) initiatives, Robotic Acquisition through Virtual Environments and Networked Simulations (RAVENS) and Joint Architecture for Unmanned Ground Systems (JAUGS), will be discussed. RAVENS and JAUGS will be used to efficiently evaluate and integrate new technologies to be incorporated in system upgrades.
A field evaluation of Transflex bridge joint performance.
DOT National Transportation Integrated Search
1972-01-01
Presented are the results of a field evaluation of the various types of the General Tire Transflex joint known to be in use in Virginia. An effort was made, whenever possible, to qualitatively evaluate the joints with respect to their (1) watertightn...
Strandberg-Larsen, Martin; Bernt Nielsen, Mikkel; Krasnik, Allan
2007-01-01
Background Since 1994 formal health plans have been used for coordination of health care services between the regional and local level in Denmark. From 2007 a substantial reform has changed the administrative boundaries of the system and a new tool for coordination has been introduced. Purpose To assess the use of the pre-reform health plans as a tool for strengthening coordination, quality and preventive efforts between the regional and local level of health care. Methods A survey addressed to: all counties (n=15), all municipalities (n=271) and a randomised selected sample of general practitioners (n=700). Results The stakeholders at the administrative level agree that health plans have not been effective as a tool for coordination. The development of health plans are dominated by the regional level. At the functional level 27 percent of the general practitioners are not familiar with health plans. Among those familiar with health plans 61 percent report that health plans influence their work to only a lesser degree or not at all. Conclusion Joint health planning is needed to achieve coordination of care. Efforts must be made to overcome barriers hampering efficient whole system planning. Active policies emphasising the necessity of health planning, despite involved cost, are warranted to insure delivery of care that benefits the health of the population. PMID:17925882
Corporate Perspective: An Interview with John Sculley.
ERIC Educational Resources Information Center
Temares, M. Lewis
1989-01-01
John Sculley, the chairman of the board of Apple Computer, Inc., discusses information technology management, management strategies, network management, the Chief Information Officer, strategic planning, back-to-the-future planning, business and university joint ventures, and security issues. (MLW)
2001 Federal Radionavigation Plan
DOT National Transportation Integrated Search
2002-03-19
The report is the official source of radio navigation policy and planning for the Federal Government and is required by the National Defense Authorization Act for Fiscal year 1998. It is prepared jointly by the Departments of Defense (DoD) and Transp...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Livingston, Hugh D.
1996-07-01
Conducted planning and implementation of ocean carbon dioxide hydrographic surveys ocean process studies, time-series studies of Bermuda and Hawaii, and sponsored scientific workshops for those activities.
Implications of the Joint Comprehensive Plan of Action
NASA Astrophysics Data System (ADS)
Perkovich, George
2017-11-01
This essay describes the background behind the July 2015 Joint Comprehensive Plan of Action that was negotiated to redress the crisis that had developed around Iran's nuclear activities, and summarizes some of the agreement's key features. The essay then highlights political and strategic factors that enabled the diplomatic breakthrough, and draws lessons that could inform approaches to future proliferation challenges. The conclusion suggests how some of the agreement's innovative features could be built upon and applied more broadly to reduce risks that civilian nuclear energy programs could be diverted for military purposes and to inform approaches to nuclear disarmament in the future.
Robinson, James C; Brown, Timothy T
2014-09-01
To quantify the potential reduction in hospital costs from adoption of best local practices in supply chain management and discharge planning. We performed multivariate statistical analyses of the association between total variable cost per procedure and medical device price and length of stay, controlling for patient and hospital characteristics. Ten hospitals in 1 major metropolitan area supplied patient-level administrative data on 9778 patients undergoing joint replacement, spine fusion, or cardiac rhythm management (CRM) procedures in 2008 and 2010. The impact on each hospital of matching lowest local market device prices and lowest patient length of stay (LOS) was calculated using multivariate regression analysis controlling for patient demographics, diagnoses, comorbidities, and implications. Average variable costs ranged from $11,315 for joint replacement to $16,087 for CRM and $18,413 for spine fusion. Implantable medical devices accounted for a large share of each procedure's variable costs: 44% for joint replacement, 39% for spine fusion, and 59% for CRM. Device prices and patient length-of-stay exhibited wide variation across hospitals. Total potential hospital cost savings from achieving best local practices in device prices and patient length of stay are 14.5% for joint replacement, 18.8% for spine fusion;,and 29.1% for CRM. Hospitals have opportunities for cost reduction from adoption of best local practices in supply chain management and discharge planning.
Regional Security in the Gulf of Guinea; A Vital Interest of the United States
2010-03-18
Davis Highway, Suite 1204, Arlington VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law , no person shall be...A paper submitted to the Faculty of the Joint Advanced Warfighting School in partial satisfaction of the requirements of a Master of Science...Degree in Joint Campaign Planning and Strategy. The contents of this paper reflect my personal views and are not necessarily endorsed by the Joint
Managing Non-Standard Force Demands: Risk Implications of the Global Force Management System
2012-04-26
GLOBAL FORCE MANAGEMENT SYSTEM by James C. Wright GS-14, Department of Defense A paper submitted to the Faculty of the Joint Advanced Warfighting...School in partial satisfaction of the requirements of a Master of Science Degree in Joint Campaign Planning and Strategy. The contents of this paper ...reflect my own personal views and are not necessarily endorsed by the Joint Forces Staff College or the Department of Defense. This paper is entirely
NASA Technical Reports Server (NTRS)
1976-01-01
Payload mission control concepts are developed for real time flight operations of STS. Flight planning, training, simulations, and other flight preparations are included. Payload activities for the preflight phase, activity sequences and organizational allocations, and traffic and experience factors to establish composite man-loading for joint STS payload activities are identified for flight operations from 1980 to 1985.
Wind-Driven Montgolfiere Balloons for Mars
NASA Technical Reports Server (NTRS)
Jones, Jack A.; Fairbrother, Debora; Lemieux, Aimee; Lachenmeier, Tim; Zubrin, Robert
2005-01-01
Solar Montgolfiere balloons, or solar-heated hot air balloons have been evaluated by use on Mars for about 5 years. In the past, JPL has developed thermal models that have been confirmed, as well as developed altitude control systems to allow the balloons to float over the landscape or carry ground sampling instrumentation. Pioneer Astronautics has developed and tested a landing system for Montgolfieres. JPL, together with GSSL. have successfully deployed small Montgolfieres (<15-m diameter) in the earth's stratosphere, where conditions are similar to a Mars deployment. Two larger Montgolfieres failed, however, and a series of larger scale Montgolfieres is now planned using stronger, more uniform polyethylene bilaminate, combined with stress-reducing ripstitch and reduced parachute deceleration velocities. This program, which is presently under way, is a joint effort between JPL, WFF, and GSSL, and is planned for completion in three years.
Ground based simulation of life sciences Spacelab experiments
NASA Technical Reports Server (NTRS)
Rummel, J. A.; Alexander, W. C.; Bush, W. H.; Johnston, R. S.
1978-01-01
The third in a series of Spacelab Mission Development tests was a joint effort of the Ames Research and Johnson Space Centers to evaluate planned operational concepts of the Space Shuttle life sciences program. A three-man crew conducted 26 experiments and 12 operational tests, utilizing both human and animal subjects. The crew lived aboard an Orbiter/Spacelab mockup for the seven-day simulation. The Spacelab was identical in geometry to the European Space Agency design, complete with removable rack sections and stowage provisions. Communications were controlled as currently planned for operational Shuttle flights. A Science Operations Remote Center at the Ames Research Center was managed by simulated Mission Control and Payload Operation Control Centers at the Johnson Space Center. This paper presents the test objectives, describes the facilities and test program, and outlines the results of this test.
Testing of printed circuit board solder joints by optical correlation
NASA Technical Reports Server (NTRS)
Espy, P. N.
1975-01-01
An optical correlation technique for the nondestructive evaluation of printed circuit board solder joints was evaluated. Reliable indications of induced stress levels in solder joint lead wires are achievable. Definite relations between the inherent strength of a solder joint, with its associated ability to survive stress, are demonstrable.
The POP Program: the patient education advantage.
Claeys, M; Mosher, C; Reesman, D
1998-01-01
In 1992, a preoperative education program was developed for total joint replacement patients in a small community hospital. The goals of the program were to increase educational opportunities for the joint replacement patients, prepare patients for hospitalization, plan for discharge needs, and increase efficiency of the orthopaedic program. Since 1992, approximately 600 patients have attended the education program. Outcomes have included positive responses from patients regarding their preparedness for surgery, increased participation in their plan of care, coordinated discharge planning, decreased length of stay, and progression across the continuum of care. A multidisciplinary approach to preparing patients for surgery allows for a comprehensive and efficient education program. Marketing of successful programs can enhance an institution's competitive advantage and help ensure the hospital's viability in the current health care arena.
Emadi Andani, Mehran; Bahrami, Fariba
2012-10-01
Flash and Hogan (1985) suggested that the CNS employs a minimum jerk strategy when planning any given movement. Later, Nakano et al. (1999) showed that minimum angle jerk predicts the actual arm trajectory curvature better than the minimum jerk model. Friedman and Flash (2009) confirmed this claim. Besides the behavioral support that we will discuss, we will show that this model allows simplicity in planning any given movement. In particular, we prove mathematically that each movement that satisfies the minimum joint angle jerk condition is reproducible by a linear combination of six functions. These functions are calculated independent of the type of the movement and are normalized in the time domain. Hence, we call these six universal functions the Movement Elements (ME). We also show that the kinematic information at the beginning and end of the movement determines the coefficients of the linear combination. On the other hand, in analyzing recorded data from sit-to-stand (STS) transfer, arm-reaching movement (ARM) and gait, we observed that minimum joint angle jerk condition is satisfied only during different successive phases of these movements and not for the entire movement. Driven by these observations, we assumed that any given ballistic movement may be decomposed into several successive phases without overlap, such that for each phase the minimum joint angle jerk condition is satisfied. At the boundaries of each phase the angular acceleration of each joint should obtain its extremum (zero third derivative). As a consequence, joint angles at each phase will be linear combinations of the introduced MEs. Coefficients of the linear combination at each phase are the values of the joint kinematics at the boundaries of that phase. Finally, we conclude that these observations may constitute the basis of a computational interpretation, put differently, of the strategy used by the Central Nervous System (CNS) for motor planning. We call this possible interpretation "Coordinated Minimum Angle jerk Policy" or COMAP. Based on this policy, the function of the CNS in generating the desired pattern of any given task (like STS, ARM or gait) can be described computationally using three factors: (1) the kinematics of the motor system at given body states, i.e., at certain movement events/instances, (2) the time length of each phase, and (3) the proposed MEs. From a computational point of view, this model significantly simplifies the processes of movement planning as well as feature abstraction for saving characterizing information of any given movement in memory. Copyright © 2012 Elsevier B.V. All rights reserved.
26 CFR 1.401(a)-11 - Qualified joint and survivor annuities.
Code of Federal Regulations, 2012 CFR
2012-04-01
... attained) while in active service of the employer maintaining the plan, or (C) In the case of a plan which... normal retirement age is attained while employed by an employer maintaining the plan. (2) Certain cash... consisting of X Corporation stock, (3) five equal annual cash payments, (4) a life annuity, or (5) a...
26 CFR 1.401(a)-11 - Qualified joint and survivor annuities.
Code of Federal Regulations, 2010 CFR
2010-04-01
... attained) while in active service of the employer maintaining the plan, or (C) In the case of a plan which... normal retirement age is attained while employed by an employer maintaining the plan. (2) Certain cash... consisting of X Corporation stock, (3) five equal annual cash payments, (4) a life annuity, or (5) a...
Code of Federal Regulations, 2010 CFR
2010-04-01
..., the rule below applies. Earliest retirement age is the early retirement age determined under the plan, or if no early retirement age, the normal retirement age determined under the plan. If the... retirement age under the plan. The QJSA requirements apply to such a distribution because the annuity...
DOT National Transportation Integrated Search
2010-04-21
To prepare for future air traffic growth, the Federal Aviation Administration (FAA), including its Joint Planning and Development Office (JPDO) and Air Traffic Organization, is planning and implementing the Next Generation Air Transportation System (...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-06-01
... publication of the Commission's order approving the proposed Plan in the Federal Register. D. Development and..., Illinois 60605 (5) EDGA Exchange, Inc., 545 Washington Boulevard, Sixth Floor, Jersey City, NJ 07310 (6) EDGX Exchange, Inc., 545 Washington Boulevard, Sixth Floor, Jersey City, NJ 07310 (7) Financial...
Planning for the Elderly Without Architecture Is Like Architecture for the Elderly Without Planning
ERIC Educational Resources Information Center
Bednar, Michael; And Others
1977-01-01
A joint project between the separate divisions of planning and architecture at the UVA School of Architecture was conducted to allow graduate students to study the environmental needs of the elderly. The case-study approach was undertaken in Lynchburg, Virginia, and the year-long project was seen as a "real World" problem. (LBH)
Five Steps to Solving the Interagency Coordination Process
2007-05-10
EDUCATION, CARRER PLACEMENT, AND PLANNING IA education and career placement will become a necessity, in much the same way that Joint Professional...career placement, and planning , which could significantly reduce interagency coordination issues and more effectively harmonize the instruments of...9 Reduce Bureaucracy / Redundancy 12 Shift Funding to Deficient Capabilities 13 IA Education, Career Placement, and Planning 14
JESS facility modification and environmental/power plans
NASA Technical Reports Server (NTRS)
Bordeaux, T. A.
1984-01-01
Preliminary plans for facility modifications and environmental/power systems for the JESS (Joint Exercise Support System) computer laboratory and Freedom Hall are presented. Blueprints are provided for each of the facilities and an estimate of the air conditioning requirements is given.
DOT National Transportation Integrated Search
2008-09-01
Under the direction of the U.S. / Mexico Joint Working Committee, the California Department of : Transportation (Caltrans) and the State of Baja Californias Secretariat of Infrastructure and Urban : Development (SIDUE) hereby establish the Califor...
DOT National Transportation Integrated Search
2009-03-01
To prepare for forecasted air traffic : growth, the Federal Aviation : Administration (FAA), including its : Joint Planning and Development : Office (JPDO) and Air Traffic : Organization (ATO), is planning for : and implementing the Next : Generation...
Reliability of four models for clinical gait analysis.
Kainz, Hans; Graham, David; Edwards, Julie; Walsh, Henry P J; Maine, Sheanna; Boyd, Roslyn N; Lloyd, David G; Modenese, Luca; Carty, Christopher P
2017-05-01
Three-dimensional gait analysis (3DGA) has become a common clinical tool for treatment planning in children with cerebral palsy (CP). Many clinical gait laboratories use the conventional gait analysis model (e.g. Plug-in-Gait model), which uses Direct Kinematics (DK) for joint kinematic calculations, whereas, musculoskeletal models, mainly used for research, use Inverse Kinematics (IK). Musculoskeletal IK models have the advantage of enabling additional analyses which might improve the clinical decision-making in children with CP. Before any new model can be used in a clinical setting, its reliability has to be evaluated and compared to a commonly used clinical gait model (e.g. Plug-in-Gait model) which was the purpose of this study. Two testers performed 3DGA in eleven CP and seven typically developing participants on two occasions. Intra- and inter-tester standard deviations (SD) and standard error of measurement (SEM) were used to compare the reliability of two DK models (Plug-in-Gait and a six degrees-of-freedom model solved using Vicon software) and two IK models (two modifications of 'gait2392' solved using OpenSim). All models showed good reliability (mean SEM of 3.0° over all analysed models and joint angles). Variations in joint kinetics were less in typically developed than in CP participants. The modified 'gait2392' model which included all the joint rotations commonly reported in clinical 3DGA, showed reasonable reliable joint kinematic and kinetic estimates, and allows additional musculoskeletal analysis on surgically adjustable parameters, e.g. muscle-tendon lengths, and, therefore, is a suitable model for clinical gait analysis. Copyright © 2017. Published by Elsevier B.V.
RETURN TO DIVISION IA FOOTBALL FOLLOWING A 1ST METATARSOPHALANGEAL JOINT DORSAL DISLOCATION
Cook, Chad; Zarzour, Hap; Moorman, Claude T.
2010-01-01
Background. Although rare in occurrence, a dorsal dislocation of the 1st metatarsophalangeal (MTP) joint has been successfully treated using surgical and/or non-operative treatment. No descriptions of conservative intervention following a dorsal dislocation of the MTP joint in an athlete participating in a high contact sport are present in the literature. Objectives. The purpose of this case report is to describe the intervention and clinical reasoning during the rehabilitative process of a collegiate football player diagnosed with a 1st MTP joint dorsal dislocation. The plan of care and return to play criteria used for this athlete are presented. Case Description. The case involved a 19-year-old male Division IA football player, who suffered a traumatic dorsal dislocation of the 1st MTP joint during practice. The dislocation was initially treated on-site by closed reduction. Non-operative management included immobilization, therapeutic exercises, non-steroidal anti-inflammatories, manual treatment, modalities, prophylactic athletic taping, gait training, and a sport specific progression program for full return to Division IA football. Outcomes. Discharge from physical therapy occurred after six weeks of treatment. At discharge, no significant deviations existed during running, burst, and agility related drills. At a six-month follow-up, the patient reported full return to all football activities including contact drills without restrictions. Discussion. This case describes an effective six-week rehabilitation intervention for a collegiate football player who sustained a traumatic great toe dorsal dislocation. Further study is suggested to evaluate the intervention strategies and timeframe for return to contact sports. PMID:21589669
Hood River and Pelton Ladder Evaluation Studies : Annual Report 1994.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Olsen, Erik A.; French, Rod A.; Ritchey, Alan D.
1995-09-01
In 1992, the Northwest Power Planning Council approved the Hood River and Pelton ladder master plans within the framework of the Columbia River Basin Fish and Wildlife Program. The master plans define an approach for implementing a hatchery supplementation program in the Hood River subbasin. The hatchery program as defined in the master plans is called the Hood River Hatchery Production Program (HRPP). The HRPP will be phased in over several years and will be jointly implemented by the Oregon Department of Fish and Wildlife (ODFW) and the Confederated Tribes of the Warm Springs (CTWS) Reservation. In December 1991, amore » monitoring and evaluation program was implemented in the Hood River subbasin to collect life history and production information on stocks of anadromous salmonids returning to the Hood River subbasin. The program was implemented to provide the baseline information needed to: (1) evaluate various management options for implementing the HRPP and (2) determine any post-project impacts the HRPP has on indigenous populations of resident fish. Information collected during the 1992-94 fiscal years will also be used to prepare an environmental impact statement (EIS) evaluating the program`s impact on the human environment. To begin construction on project facilities, it was proposed that the HRPP be implemented in two phases. Phase I would include work that would fall under a {open_quotes}categorical exclusion{close_quotes} from NEPA, and Phase II would include work requiring an EIS prior to implementation. This report summarizes the life history and escapement data collected in the Hood River subbasin and the status work of implemented under Phase I of the HR Life history and escapement data will be used to: (1) test the assumptions on which harvest and escapement goals for the Hood River and Pelton ladder master plans are based and (2) develop biologically based management recommendations for implementing the HRPP.« less
Neglected bilateral congenital dislocation of the patella.
Tokgöz, Mehmet Ali; Çavuşoğlu, Ali Turgay; Ayanoğlu, Tacettin; Elma, Tarık; Vural, Abdurrahman
2017-08-01
Congenital dislocation of the patella is a disorder that presents with dysfunction in extensor mechanism. Although congenital dislocation of the patella mostly occurs in children with genetic disorders, it may also occur in totally healthy children, despite rarely. In this article, we report a 16-year-old male patient who referred to our clinic with complaints of gait disturbance, frequent falls, and muscular weakness in lower extremity. The patient had no complaints during walking, but had difficulty in running and walking up and down the stairs. It was observed that the range of motion of the knee joint was completely painless and the quadriceps muscle strength was evaluated as 3/5. An evaluation of computed tomography and magnetic resonance imaging results showed that the patella was dislocated. It became clear with magnetic resonance imaging that extensor mechanism was continuous but patellar tendon was not attached to its anatomical position. Surgical treatment was not planned because the patient did not describe any pain complaint and there was no limitation of joint movement, he could walk without support and without device and also refused to be operated. The choice of treatment should be based on the patient's preference, and pain and functional status.
Potential Alternatives Report for Validation of Alternatives to Aliphatic Isocyanate Polyurethanes
NASA Technical Reports Server (NTRS)
Lewis, pattie
2011-01-01
Identifying and selecting alternative materials and technologies that have the potential to reduce the identified HazMats and hazardous air pollutants (HAPs), while incorporating sound corrosion prevention and control technologies, is a complicated task due to the fast pace at which new technologies emerge and rules change. The alternatives are identified through literature searches, electronic database and Internet searches, surveys, and/or personal and professional contacts. Available test data was then compiled on the proposed alternatives to determine if the materials meet the test objectives or if further)laboratory or field-testing will be required. After reviewing technical information documented in the PAR, government representatives, technical representatives from the affected facilities, and other stakeholders involved in the process will select the list of viable alternative coatings for consideration and testing under the project's Joint Test Protocol entitled Joint Test Protocol for Validation of Alternatives to Aliphatic Isocyanate Polyurethanes and Field Test Plan entitled Field Evaluations Test Plan for Validation of Alternatives to Aliphatic Isocyanate Polyurethanes, both prepared by ITB. Test results will be reported in a Joint Test Report upon completion oftesting. The selection rationale and conclusions are documented in this PAR. A cost benefit analysis will be prepared to quantify the estimated capital and process costs of coating alternatives and cost savings relative to the current coating processes, however, some initial cost data has been included in this PAR. For this coatings project, isocyanates, as found in aliphatic isocyanate polyurethanes, were identified as the target HazMat to be eliminated. Table 1-1 lists the target HazMats, the related process and application, current specifications, and affected programs.
Kinematics, controls, and path planning results for a redundant manipulator
NASA Technical Reports Server (NTRS)
Gretz, Bruce; Tilley, Scott W.
1989-01-01
The inverse kinematics solution, a modal position control algorithm, and path planning results for a 7 degree of freedom manipulator are presented. The redundant arm consists of two links with shoulder and elbow joints and a spherical wrist. The inverse kinematics problem for tip position is solved and the redundant joint is identified. It is also shown that a locus of tip positions exists in which there are kinematic limitations on self-motion. A computationally simple modal position control algorithm has been developed which guarantees a nearly constant closed-loop dynamic response throughout the workspace. If all closed-loop poles are assigned to the same location, the algorithm can be implemented with very little computation. To further reduce the required computation, the modal gains are updated only at discrete time intervals. Criteria are developed for the frequency of these updates. For commanding manipulator movements, a 5th-order spline which minimizes jerk provides a smooth tip-space path. Schemes for deriving a corresponding joint-space trajectory are discussed. Modifying the trajectory to avoid joint torque saturation when a tip payload is added is also considered. Simulation results are presented.
Friction evaluation of concrete paver blocks for airport pavement applications
NASA Technical Reports Server (NTRS)
Yager, Thomas J.
1992-01-01
The development and use of concrete paver blocks is reviewed and some general specifications for application of this type of pavement surface at airport facilities are given. Two different shapes of interlocking concrete paver blocks installed in the track surface at NASA Langley's Aircraft Landing Dynamics Facility (ALDF) are described. Preliminary cornering performance results from testing of 40 x 14 radial-belted and bias-ply aircraft tires are reviewed. These tire tests are part of a larger, ongoing joint NASA/FAA/Industry Surface Traction and Radial Tire (START) Program involving several different tire sizes. Both dry and wet surface conditions were evaluated on the two concrete paver block test surfaces and a conventional, nongrooved Portland cement concrete surface. Future test plans involving evaluation of other concrete paver block designs at the ALDF are indicated.
NASA tire/runway friction projects
NASA Technical Reports Server (NTRS)
Yager, Thomas J.
1995-01-01
The paper reviews several aspects of NASA Langley Research Center's tire/runway friction evaluations directed towards improving the safety and economy of aircraft ground operations. The facilities and test equipment used in implementing different aircraft tire friction studies and other related aircraft ground performance investigations are described together with recent workshop activities at NASA Wallops Flight Facility. An overview of the pending Joint NASA/Transport Canada/FM Winter Runway Friction Program is given. Other NASA ongoing studies and on-site field tests are discussed including tire wear performance and new surface treatments. The paper concludes with a description of future research plans.
Magnetic Resonance Imaging and Arthroscopic Correlation in Shoulder Instability.
Knapik, Derrick M; Voos, James E
2017-12-01
The shoulder is the most inherently unstable joint in the body, prone to high rates of anterior dislocations with subsequent injuries to soft tissue and bony stabilizing structures, resulting in recurrent shoulder instability. Advanced imaging utilizing magnetic resonance (MR) imaging and MR arthrography allows for thorough evaluation of lesions present in the unstable shoulder and is critical for preoperative planning. Arthroscopic shoulder stabilization in the appropriately selected patient can help restore stability and function. This review highlights correlations between MR imaging and arthroscopy of the most commonly reported soft tissue and bony injuries present in patients with shoulder instability.
Valuation of damages to recreational trout fishing in the Upper Northeast due to acidic deposition
DOE Office of Scientific and Technical Information (OSTI.GOV)
Englin, J.E.; Cameron, T.A.; Mendelsohn, R.E.
1991-04-01
This report documents methods used to estimate economic models of changes in recreational fishing due to the acidic deposition. The analysis was conducted by Pacific Northwest Laboratory (PNL) and its subcontractors for the US Environmental Protection Agency (EPA) and the US Department of Energy (DOE) in support of the National Acidic Precipitation Assessment Program (NAPAP). The primary data needed to estimate these models were collected in the 1989 Aquatic Based Recreation Survey (ABRS), which was jointly funded by the DOE and the EPA's Office of Policy Planning and Evaluation. 11 refs., 5 figs., 15 tabs.
Water resources management. World Bank policy paper; Gestion des ressources en eau
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1993-12-31
The management framework presented in this study addresses the demand for water in Asia caused by rapid population growth and economic development. It focuses on three key actions to meet the challenge: evaluate how the region manages water resources; identify guidelines for the Bank`s water resource programs; and develop country-specific strategies and promote joint programs. Reforms built into the framework seek to modernize institutions that affect water sources. The authors suggest ways to improve planning and long-term management, streamline economic and financial policy, and upgrade `real-time` management, operation, and maintenance.
LST CGM Generator and Viewer Final Report CRADA No. TSB-1558-98
DOE Office of Scientific and Technical Information (OSTI.GOV)
Vickers, Don; Larson, Don
The purpose of this project was to jointly develop and test a software plug-in that would convert native Pro /ENGINEER digital engineering drawings to Computer Graphics Metafile (CGM) format. If it was not feasible to convert the Pro/ENGINEER files, we planned to develop and test a similar conversion of native AutoCAD engineering drawings to CGM. CGM viewer plug-ins were developed as needed. There were four main tasks in this project: 1. Requirements for CGM Plug-in 2. Product Evaluation 3. Product Development Feasibility Study 4. Developing a "Plug-In" Application.
Percutaneous foot joint needle placement using a C-arm flat-panel detector CT.
Wiewiorski, Martin; Takes, Martin Thanh Long; Valderrabano, Victor; Jacob, Augustinus Ludwig
2012-03-01
Image guidance is valuable for diagnostic injections in foot orthopaedics. Flat-detector computed tomography (FD-CT) was implemented using a C-arm, and the system was tested for needle guidance in foot joint injections. FD-CT-guided joint infiltration was performed in 6 patients referred from the orthopaedic department for diagnostic foot injections. All interventions were performed utilising a flat-panel fluoroscopy system utilising specialised image guidance and planning software. Successful infiltration was defined by localisation of contrast media depot in the targeted joint. The pre- and post-interventional numeric analogue scale (NAS) pain score was assessed. All injections were technically successful. Contrast media deposit was documented in all targeted joints. Significant relief of symptoms was noted by all 6 participants. FD-CT-guided joint infiltration is a feasible method for diagnostic infiltration of midfoot and hindfoot joints. The FD-CT approach may become an alternative to commonly used 2D-fluoroscopically guidance.
2015-01-01
system that would help in adverse weather conditions. U.S. operations in Bosnia, which were run from a relatively austere airfield with limited air... operations beginning in 2013 (CVN21, Joint Strike Fighter, Joint Unmanned Combat Air System ). cAccording to multiple FAA ofcial planning documents...Positioning System Next Generation Operational Control System HMS Handheld, Manpack and Small Form Fit HUD Head up Display IAMD Integrated Air and
Trajectory control of an articulated robot with a parallel drive arm based on splines under tension
NASA Astrophysics Data System (ADS)
Yi, Seung-Jong
Today's industrial robots controlled by mini/micro computers are basically simple positioning devices. The positioning accuracy depends on the mathematical description of the robot configuration to place the end-effector at the desired position and orientation within the workspace and on following the specified path which requires the trajectory planner. In addition, the consideration of joint velocity, acceleration, and jerk trajectories are essential for trajectory planning of industrial robots to obtain smooth operation. The newly designed 6 DOF articulated robot with a parallel drive arm mechanism which permits the joint actuators to be placed in the same horizontal line to reduce the arm inertia and to increase load capacity and stiffness is selected. First, the forward kinematic and inverse kinematic problems are examined. The forward kinematic equations are successfully derived based on Denavit-Hartenberg notation with independent joint angle constraints. The inverse kinematic problems are solved using the arm-wrist partitioned approach with independent joint angle constraints. Three types of curve fitting methods used in trajectory planning, i.e., certain degree polynomial functions, cubic spline functions, and cubic spline functions under tension, are compared to select the best possible method to satisfy both smooth joint trajectories and positioning accuracy for a robot trajectory planner. Cubic spline functions under tension is the method selected for the new trajectory planner. This method is implemented for a 6 DOF articulated robot with a parallel drive arm mechanism to improve the smoothness of the joint trajectories and the positioning accuracy of the manipulator. Also, this approach is compared with existing trajectory planners, 4-3-4 polynomials and cubic spline functions, via circular arc motion simulations. The new trajectory planner using cubic spline functions under tension is implemented into the microprocessor based robot controller and motors to produce combined arc and straight-line motion. The simulation and experiment show interesting results by demonstrating smooth motion in both acceleration and jerk and significant improvements of positioning accuracy in trajectory planning.
DOT National Transportation Integrated Search
2009-03-01
"To prepare for forecasted air traffic growth, the Federal Aviation Administration (FAA), including its Joint Planning and Development Office (JPDO) and Air Traffic Organization (ATO), is planning for and implementing the Next Generation Air Transpor...
Dissimilar metals joint evaluation
NASA Technical Reports Server (NTRS)
Wakefield, M. E.; Apodaca, L. E.
1974-01-01
Dissimilar metals tubular joints between 2219-T851 aluminum alloy and 304L stainless steel were fabricated and tested to evaluate bonding processes. Joints were fabricated by four processes: (1) inertia (friction) weldings, where the metals are spun and forced together to create the weld; (2) explosive welding, where the metals are impacted together at high velocity; (3) co-extrusion, where the metals are extruded in contact at high temperature to promote diffusion; and (4) swaging, where residual stresses in the metals after a stretching operation maintain forced contact in mutual shear areas. Fifteen joints of each type were prepared and evaluated in a 6.35 cm (2.50 in.) O.D. size, with 0.32 cm (0.13 in.) wall thickness, and 7.6 cm (3.0 in) total length. The joints were tested to evaluate their ability to withstand pressure cycle, thermal cycle, galvanic corrosion and burst tests. Leakage tests and other non-destructive test techniques were used to evaluate the behavior of the joints, and the microstructure of the bond areas was analyzed.
Technical Note: Improving the VMERGE treatment planning algorithm for rotational radiotherapy
DOE Office of Scientific and Technical Information (OSTI.GOV)
Gaddy, Melissa R., E-mail: mrgaddy@ncsu.edu; Papp,
2016-07-15
Purpose: The authors revisit the VMERGE treatment planning algorithm by Craft et al. [“Multicriteria VMAT optimization,” Med. Phys. 39, 686–696 (2012)] for arc therapy planning and propose two changes to the method that are aimed at improving the achieved trade-off between treatment time and plan quality at little additional planning time cost, while retaining other desirable properties of the original algorithm. Methods: The original VMERGE algorithm first computes an “ideal,” high quality but also highly time consuming treatment plan that irradiates the patient from all possible angles in a fine angular grid with a highly modulated beam and then makesmore » this plan deliverable within practical treatment time by an iterative fluence map merging and sequencing algorithm. We propose two changes to this method. First, we regularize the ideal plan obtained in the first step by adding an explicit constraint on treatment time. Second, we propose a different merging criterion that comprises of identifying and merging adjacent maps whose merging results in the least degradation of radiation dose. Results: The effect of both suggested modifications is evaluated individually and jointly on clinical prostate and paraspinal cases. Details of the two cases are reported. Conclusions: In the authors’ computational study they found that both proposed modifications, especially the regularization, yield noticeably improved treatment plans for the same treatment times than what can be obtained using the original VMERGE method. The resulting plans match the quality of 20-beam step-and-shoot IMRT plans with a delivery time of approximately 2 min.« less
Planning Paths Through Singularities in the Center of Mass Space
NASA Technical Reports Server (NTRS)
Doggett, William R.; Messner, William C.; Juang, Jer-Nan
1998-01-01
The center of mass space is a convenient space for planning motions that minimize reaction forces at the robot's base or optimize the stability of a mechanism. A unique problem associated with path planning in the center of mass space is the potential existence of multiple center of mass images for a single Cartesian obstacle, since a single center of mass location can correspond to multiple robot joint configurations. The existence of multiple images results in a need to either maintain multiple center of mass obstacle maps or to update obstacle locations when the robot passes through a singularity, such as when it moves from an elbow-up to an elbow-down configuration. To illustrate the concepts presented in this paper, a path is planned for an example task requiring motion through multiple center of mass space maps. The object of the path planning algorithm is to locate the bang- bang acceleration profile that minimizes the robot's base reactions in the presence of a single Cartesian obstacle. To simplify the presentation, only non-redundant robots are considered and joint non-linearities are neglected.
Preoperative Planning of Orthopedic Procedures using Digitalized Software Systems.
Steinberg, Ely L; Segev, Eitan; Drexler, Michael; Ben-Tov, Tomer; Nimrod, Snir
2016-06-01
The progression from standard celluloid films to digitalized technology led to the development of new software programs to fulfill the needs of preoperative planning. We describe here preoperative digitalized programs and the variety of conditions for which those programs can be used to facilitate preparation for surgery. A PubMed search using the keywords "digitalized software programs," "preoperative planning" and "total joint arthroplasty" was performed for all studies regarding preoperative planning of orthopedic procedures that were published from 1989 to 2014 in English. Digitalized software programs are enabled to import and export all picture archiving communication system (PACS) files (i.e., X-rays, computerized tomograms, magnetic resonance images) from either the local working station or from any remote PACS. Two-dimension (2D) and 3D CT scans were found to be reliable tools with a high preoperative predicting accuracy for implants. The short learning curve, user-friendly features, accurate prediction of implant size, decreased implant stocks and low-cost maintenance makes digitalized software programs an attractive tool in preoperative planning of total joint replacement, fracture fixation, limb deformity repair and pediatric skeletal disorders.
Assessment of NDE Methods to Detect Lack of Fusion in HDPE Butt Fusion Joints
DOE Office of Scientific and Technical Information (OSTI.GOV)
Crawford, Susan L.; Doctor, Steven R.; Cinson, Anthony D.
2011-07-31
Studies at the Pacific Northwest National Laboratory (PNNL) in Richland, Washington, were conducted to evaluate nondestructive examinations (NDE) coupled with mechanical testing of butt fusion joints in high-density polyethylene (HDPE) pipe for assessing lack of fusion. The work provided information to the United States Nuclear Regulatory Commission (NRC) on the effectiveness of volumetric inspection techniques of HDPE butt fusion joints in Section III, Division 1, Class 3, buried piping systems in nuclear power plants. This paper describes results from assessments using ultrasonic and microwave nondestructive techniques and mechanical testing with the high-speed tensile impact test and the side-bend test formore » determining joint integrity. A series of butt joints were fabricated in 3408, 12-inch (30.5-cm) IPS DR-11 HDPE material by varying the fusion parameters to create good joints and joints containing a range of lack-of-fusion conditions. Six of these butt joints were volumetrically examined with time-of-flight diffraction (TOFD), phased-array (PA) ultrasound, and the Evisive microwave system. The outer diameter (OD) weld beads were removed for microwave evaluation and the pipes ultrasonically re-evaluated. In two of the six pipes, both the outer and inner diameter (ID) weld beads were removed and the pipe joints re-evaluated. Some of the pipes were sectioned and the joints destructively evaluated with the high-speed tensile test and the side-bend test. The fusion parameters, nondestructive and destructive evaluation results have been correlated to validate the effectiveness of what each NDE technology detects and what each does not detect. There was no single NDE method that detected all of the lack-of-fusion flaws but a combination of NDE methods did detect most of the flaws.« less
Grasp planning under uncertainty
NASA Technical Reports Server (NTRS)
Erkmen, A. M.; Stephanou, H. E.
1989-01-01
The planning of dexterous grasps for multifingered robot hands operating in uncertain environments is covered. A sensor-based approach to the planning of a reach path prior to grasping is first described. An on-line, joint space finger path planning algorithm for the enclose phase of grasping was then developed. The algorithm minimizes the impact momentum of the hand. It uses a Preshape Jacobian matrix to map task-level hand preshape requirements into kinematic constraints. A master slave scheme avoids inter-finger collisions and reduces the dimensionality of the planning problem.
1996-05-01
Systems 17 Motion Bases Upgraded Aero Misc > Contact Info • AMC, Lt Col Letica , Phone (618) 256-5696 L8 Upgrade Flow Plan Advance Planning Briefing...Projected Schedule: FY 05 > Requirement Document: AMMP >• Projected Program Size: ? < $40M > Funding Status/Stability: > POCs: • AMC, Lt Col Letica
Nuclear rocket propulsion technology - A joint NASA/DOE project
NASA Technical Reports Server (NTRS)
Clark, John S.
1991-01-01
NASA and the DOE have initiated critical technology development for nuclear rocket propulsion systems for SEI human and robotic missions to the moon and to Mars. The activities and project plan of the interagency project planning team in FY 1990 and 1991 are summarized. The project plan includes evolutionary technology development for both nuclear thermal and nuclear electric propulsion systems.
Federal Register 2010, 2011, 2012, 2013, 2014
2010-03-01
... 18, 2009, because a joint resolution disapproving it was not enacted. The plan reads as follows: Plan...-governance over all of the forestry and natural resource management programs relating to the Tribe's On... the Tribe for use as it decided at its sole discretion, upon the execution by the Tribe and the...
Community of Interest Engagement Process Plan
2012-02-09
and input from Subject Matter Experts (SMEs), as shown in the far left of Figure 2. The team may prepare a Business Process Model Notation ( BPMN ) 22...22 Business Process Modeling Notation ( BPMN ) is a method of illustrating business processes in the form of a...Community of Interest Engagement Plan Joint Planning and Development Office 21 10. Acronyms BPMN Business Process Modeling Notation COI
Exercise may decrease further destruction in the adult haemophilic joint.
Harris, S; Boggio, L N
2006-05-01
The effect of exercise on adult haemophilic joints was investigated. Forty-six subjects with existing joint disease were evaluated and range of motion (ROM) in joints was measured. The effect of exercise of large joint ROM in haemophilia was evaluated by comparing the ranges of motion in subjects who exercised at least three times weekly against those subjects who did not exercise. The exercise group showed improvement in the majority of joint ranges of motion compared with the non-exercise group (P = 0.003). Thus regular exercise may help reduce further destruction in haemophilic joints by strengthening muscle ligaments and tendons surrounding the joint thereby protecting them from damage caused by recurrent haemarthrotic events.
A Need to Know: The Role of Air Force Reconnaissance in War Planning, 1945 - 1953
1991-01-01
plan BROILER , the Joint Chiefs of Staff continued their reliance on strategic air war, but the doctrinal basis for the plans shifted from precision... BROILER . In some respects BROILER resembled the PINCHER plans: the United States assumed an accidental outbreak of war, o-verwhelming Soviet superiority...assessment, BROILER relied heavily on atomic bombs. In other words, instead of a strategic campaign featuring conventional bombardment augmented by a few
The Process of Sensemaking in Complex Human Endeavors
2008-06-01
encompassing Joint, Interagency, and Multinational capabilities. The Art and Science of Battle Command LeadUnderstand CDR / Staff ART / Science In short, we...operations. Staff Running Estimates t ff i i Visualize CDR / Staff ART / Science •Planning guidance •Planning guidance •Cdr ’s Intent Describe CDR...Staff ART / Science •Plans & Orders •Preparation •Plans & Orders •Preparation •Execution WF • Intelligence •Maneuver •Fire Support • Protection
International Space Station Execution Replanning Process: Trends and Implications
NASA Technical Reports Server (NTRS)
McCormick, Robet J.
2007-01-01
International Space Station is a joint venture. Because of this, ISS execution planning- planning within the week for the ISS requires coordination across multiple partner, and the associated processes and tools to allow this coordination to occur. These processes and tools are currently defined and are extensively used. This paper summarizes these processes, and documents the current data trends associated with these processes and tools, with a focus on the metrics provided from the ISS Planning Product Change Request (PPCR) tool. As NASA's Vision for Space Exploration and general Human spaceflight trends are implemented, the probability of joint venture long duration programs such as ISS, with varying levels of intergovernmental and/or corporate partnership, will increase. Therefore, the results of this PPCR analysis serve as current Lessons learned for the ISS and for further similar ventures.
49 CFR 213.119 - Continuous welded rail (CWR); plan contents.
Code of Federal Regulations, 2012 CFR
2012-10-01
... repairs, in-track welding, and in conjunction with adjustments made in the area of tight track, a track... frequency identified in paragraph (h)(6)(i) of this section, provided that: (A) All CWR joints have been... determining the frequency of inspections under paragraph (h)(6)(i) of this section. (iv) All CWR joints that...
49 CFR 213.119 - Continuous welded rail (CWR); plan contents.
Code of Federal Regulations, 2014 CFR
2014-10-01
... repairs, in-track welding, and in conjunction with adjustments made in the area of tight track, a track... frequency identified in paragraph (h)(6)(i) of this section, provided that: (A) All CWR joints have been... determining the frequency of inspections under paragraph (h)(6)(i) of this section. (iv) All CWR joints that...
49 CFR 213.119 - Continuous welded rail (CWR); plan contents.
Code of Federal Regulations, 2013 CFR
2013-10-01
... repairs, in-track welding, and in conjunction with adjustments made in the area of tight track, a track... frequency identified in paragraph (h)(6)(i) of this section, provided that: (A) All CWR joints have been... determining the frequency of inspections under paragraph (h)(6)(i) of this section. (iv) All CWR joints that...
Irregular Warfare (IW) Joint Operating Concept (JOC), Version 1.0
2007-09-11
disruptive challenges. Key portions of the guidance relating to IW include: • Improving proficiency against irregular challenges. • Redefining past...12 Remarks at the Joint Worldwide Planning Conference, Edelweiss Conference Center Garmisch, Germany, 30 November...Requirements associated with GWOT and IW include: • Steady-state – deter and defend against external transnational terrorist attacks, enable
Gen. Paul J. Selva > Joint Chiefs of Staff > Article View
aircraft systems and executive officer, Deputy Chief of Staff, Plans and Resources, Headquarters Strategic Facebook on Flickr Joint Chiefs Army Chief of Staff Marine Corps Commandant Chief of Naval Operations Air Force Chief of Staff Chief of National Guard Bureau Biographies Directorates Directorates of Management
ERIC Educational Resources Information Center
Eason, Sarah H.; Ramani, Geetha B.
2017-01-01
Cognitive aspects of children's executive function (EF) were examined as moderators of the effectiveness of parental guidance on children's learning. Thirty-two 5-year-old children and their parents were observed during joint problem-solving. Forms of guidance geared towards cognitive assistance were coded as directive or elaborative, and…
Crisis action planning and replanning using SIPE-2
NASA Technical Reports Server (NTRS)
Skidmore, Jennifer D.
1993-01-01
Rome Laboratory and DARPA are jointly sponsoring an initiative to develop the next generation of AI planning and scheduling technology focused on military operations planning, especially for crisis situations. SRI International has demonstrated their knowledge-based planning technology in this domain with a system called SOCAP, System for Operations Crisis Action Planning. SOCAP's underlying power comes from SIPE-2, a hierarchical, domain-independent, nonlinear AI planner also developed at SRI. This paper discusses the features of SIPE-2 that made it an ideal choice for military operations planning and which contributed greatly to SOCAP's success.
Federal Register 2010, 2011, 2012, 2013, 2014
2011-12-06
...) Federal joint lead agencies, and the State of California Department of Fish and Game (DFG), acting as the..., Preservation, and Restoration Plan (SMP) Final EIS/EIR. The SMP is a comprehensive plan designed to address the...
78 FR 45996 - Connected Vehicle Planning and Policy Stakeholder Meeting; Notice of Public Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2013-07-30
... DEPARTMENT OF TRANSPORTATION Connected Vehicle Planning and Policy Stakeholder Meeting; Notice of Public Meeting AGENCY: ITS Joint Program Office, Research and Innovative Technology Administration, U.S. Department of Transportation. ACTION: Notice. The U.S. Department of Transportation (USDOT) Intelligent...
A Common Foundation of Information and Analytical Capability for AFSPC Decision Making
2005-06-23
System Strategic Master Plan MAPs/MSP CRRAAF TASK FORCE CONOPS MUA Task Weights Engagement Analysis ASIIS Optimization ACEIT COST Analysis...Engangement Architecture Analysis Architecture MUA AFSPC POM S&T Planning Military Utility Analysis ACEIT COST Analysis Joint Capab Integ Develop System
NASA Astrophysics Data System (ADS)
Wang, Mingming; Luo, Jianjun; Yuan, Jianping; Walter, Ulrich
2018-05-01
Application of the multi-arm space robot will be more effective than single arm especially when the target is tumbling. This paper investigates the application of particle swarm optimization (PSO) strategy to coordinated trajectory planning of the dual-arm space robot in free-floating mode. In order to overcome the dynamics singularities issue, the direct kinematics equations in conjunction with constrained PSO are employed for coordinated trajectory planning of dual-arm space robot. The joint trajectories are parametrized with Bézier curve to simplify the calculation. Constrained PSO scheme with adaptive inertia weight is implemented to find the optimal solution of joint trajectories while specific objectives and imposed constraints are satisfied. The proposed method is not sensitive to the singularity issue due to the application of forward kinematic equations. Simulation results are presented for coordinated trajectory planning of two kinematically redundant manipulators mounted on a free-floating spacecraft and demonstrate the effectiveness of the proposed method.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lawton, Craig R.
2015-01-01
The military is undergoing a significant transformation as it modernizes for the information age and adapts to address an emerging asymmetric threat beyond traditional cold war era adversaries. Techniques such as traditional large-scale, joint services war gaming analysis are no longer adequate to support program evaluation activities and mission planning analysis at the enterprise level because the operating environment is evolving too quickly. New analytical capabilities are necessary to address modernization of the Department of Defense (DoD) enterprise. This presents significant opportunity to Sandia in supporting the nation at this transformational enterprise scale. Although Sandia has significant experience with engineeringmore » system of systems (SoS) and Complex Adaptive System of Systems (CASoS), significant fundamental research is required to develop modeling, simulation and analysis capabilities at the enterprise scale. This report documents an enterprise modeling framework which will enable senior level decision makers to better understand their enterprise and required future investments.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1999-08-10
This Proposed Plan addresses the remediation of groundwater contamination at the chemical plant area of the Weldon Spring site in Weldon Spring, Missouri. The site is located approximately 48 km (30 mi) west of St. Louis in St. Charles County . Remedial activities at the site will be conducted in accordance with the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). The U.S. Department of Energy (DOE), in conjunction with the U.S. Department of the Army (DA), conducted a joint remedial investigation/feasibility study (RI/FS) to allow for a comprehensive evaluation of groundwater conditions at the Weldon Spring chemical plant areamore » and the Weldon Spring ordnance works area, which is an Army site adjacent to the chemical plant area. Consistent with DOE policy, National Environmental Policy Act (NEPA) values have been incorporated into the CERCLA process. That is, the analysis conducted and presented in the RVFS reports included an evaluation of environmental impacts that is comparable to that performed under NEPA. This Proposed Plan summarizes information about chemical plant area groundwater that is presented in the following documents: (1) The Remedial Investigation (RI), which presents information on the nature and extent of contamination; (2) The Baseline Risk Assessment (BRA), which evaluates impacts to human health and the environment that could occur if no cleanup action of the groundwater were taken (DOE and DA 1997a); and (3) The Feasibility Study (FS) and the Supplemental FS, which develop and evaluate remedial action alternatives for groundwater remediation.« less
Evaluation of tantalum 316 stainless steel transition joints
NASA Technical Reports Server (NTRS)
Stoner, D. R.
1972-01-01
Tubular transition joints providing a metallurgically bonded connection between tantalum and 316 stainless steel pipe sections were comparatively evaluated for durability under thermal cycling conditions approximating the operation of a SNAP-8 mercury boiler. Both coextruded and vacuum brazed transition joints of 50mm (2 inch) diameter were tested by thermal cycling 100 times between 730 C and 120 C(1350 F and 250 F) in a high vacuum environment. The twelve evaluated transition joints survived the full test sequence without developing leaks, although liquid penetrant bond line indications eventually developed in all specimens. The brazed transition joints exhibited the best dimensional stability and bond line durability.
Tomlinson, Paul; Hewitt, Stephen; Blackshaw, Neil
2013-09-01
There has been a welcome joining up of the rhetoric around health, the environment and land use or spatial planning in both the English public health white paper and the National Planning Policy Framework. However, this paper highlights a real concern that this is not being followed through into practical guidance needed by local authorities (LAs), health bodies and developers about how to deliver this at the local level. The role of Joint Strategic Needs Assessments (JSNAs) and Health and Wellbeing Strategies (HWSs) have the potential to provide a strong basis for integrated local policies for health improvement, to address the wider determinants of health and to reduce inequities. However, the draft JSNA guidance from the Department of Health falls short of providing a robust, comprehensive and practical guide to meeting these very significant challenges. The paper identifies some examples of good practice. It recommends that action should be taken to raise the standards of all JSNAs to meet the new challenges and that HWSs should be aligned spatially and temporally with local plans and other LA strategies. HWSs should also identify spatially targeted interventions that can be delivered through spatial planning or transport planning. Steps need to be taken to ensure that district councils are brought into the process.
Automated planning of MRI scans of knee joints
NASA Astrophysics Data System (ADS)
Bystrov, Daniel; Pekar, Vladimir; Young, Stewart; Dries, Sebastian P. M.; Heese, Harald S.; van Muiswinkel, Arianne M.
2007-03-01
A novel and robust method for automatic scan planning of MRI examinations of knee joints is presented. Clinical knee examinations require acquisition of a 'scout' image, in which the operator manually specifies the scan volume orientations (off-centres, angulations, field-of-view) for the subsequent diagnostic scans. This planning task is time-consuming and requires skilled operators. The proposed automated planning system determines orientations for the diagnostic scan by using a set of anatomical landmarks derived by adapting active shape models of the femur, patella and tibia to the acquired scout images. The expert knowledge required to position scan geometries is learned from previous manually planned scans, allowing individual preferences to be taken into account. The system is able to automatically discriminate between left and right knees. This allows to use and merge training data from both left and right knees, and to automatically transform all learned scan geometries to the side for which a plan is required, providing a convenient integration of the automated scan planning system in the clinical routine. Assessment of the method on the basis of 88 images from 31 different individuals, exhibiting strong anatomical and positional variability demonstrates success, robustness and efficiency of all parts of the proposed approach, which thus has the potential to significantly improve the clinical workflow.
Romañach, Stephanie S.; Conzelmann, Craig; Daugherty, Adam; Lorenz, Jerome J.; Hunnicutt, Christina; Mazzotti, Frank J.
2011-01-01
Ecological conditions in the Greater Everglades have changed due to human activities, including the construction of canals to divert water away from the core of the landscape. Current and planned restoration projects are designed to produce a natural sheetflow of water across the landscape. This restoration of water flow should provide an increase in freshwater needed to restore natural salinities to the fringing estuarine ecosystem. In this report, we describe a Landscape Habitat Suitability Index model designed to evaluate alternative restoration plans for the benefit of a key species, the roseate spoonbill (Platalea ajaja). Model output has shown to be a good indicator of areas capable of supporting spoonbills. Use of this model will allow examination of the potential response of this key species to water management proposed through the Greater Everglades restoration process.
Argumentation for coordinating shared activities
NASA Technical Reports Server (NTRS)
Clement, Bradley J.; Barrett, Anthony C.; Schaffer, Steven R.
2004-01-01
an increasing need for space missions to be able to collaboratively (and competitively) develop plans both within and across missions. In addition, interacting spacecraft that interleave onboard planning and execution must reach consensus on their commitments to each other prior to execution. In domains where missions have varying degrees of interaction and different constraints on communication and computation, the missions will require different coordination protocols in order to efficiently reach consensus with in their imposed deadlines. We describe a Shared Activity Coordination (SHAC) framework that provides a decentralized algorithm for negotiating the scheduling of shared activities over the lifetimes of multiple agents and a foundation for customizing protocols for negotiating planner interactions. We investigate variations of a few simple protocols based on argumentation and distributed constraints satisfaction techniques and evaluate their abilities to reach consistent solutions according to computation, time, and communication costs in an abstract domain where spacecraft propose joint measurements.
Hoffman, Heidi L; Castro-Donlan, Carolyn A; Johnson, Victoria M; Church, Daniel R
2004-01-01
Categorical funding mechanisms traditionally used to fund public health programs are a challenge to providers serving individuals with complex needs that often span multiple service areas. Integration--a formalized, collaborative process among service systems--responds to the challenge by decreasing fragmentation of care and improving coordination. In 2000, the Massachusetts Department of Public Health (MDPH) received a one-year planning grant from the federal Substance Abuse and Mental Health Services Administration (SAMHSA) to evaluate opportunities for integrating HIV/AIDS programs and substance abuse treatment programs. The project was later expanded to include viral hepatitis programming. Outcomes include the development of a strategic plan, joint procurement initiatives, and an ongoing commitment to sustain inter-bureau integration efforts, even in the face of substantial budget reductions. Integrated approaches can promote greater efficiency, improving communication and coordination among clients, providers, and government funding agencies.
Kraeima, J; Merema, B J; Witjes, M J H; Spijkervet, F K L
2018-05-01
Patients suffering from osteoarthritis, ankylosis (e.g. post-trauma or tumour) in the temporomandibular joint (TMJ) can present with symptoms such as severely restricted mouth opening, pain or other dynamic restrictions of the mandible. To alleviate the symptoms, a total joint prosthesis can be indicated, such as the Groningen TMJ prosthesis. This was developed as a stock device with a lowered centre of rotation for improved translational and opening capacity. This study aimed to improve the design of the prosthesis, and produce a workflow for a customized Groningen TMJ prosthesis, in order to make it more accurate and predictable. The fossa and mandibular components of the Groningen TMJ prosthesis were customized. A series of five human cadavers was operated and bilateral TMJ prostheses were placed using custom cutting and drilling guides. Placement accuracy was evaluated based on post-operative CT data. A total of N = 10 prostheses were placed and analysed. The average Euclidean distance deviation from planned to actual position was 0.81 mm (SD 0.21). All prostheses were placed according to the routine surgical approaches and had an excellent alignment with the bony structures. The newly developed custom Groningen TMJ prosthesis can be placed with great accuracy and is the first step for improving TMJ total joint replacement surgery. Copyright © 2018 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.
Biomechanics of Pediatric Manual Wheelchair Mobility
Slavens, Brooke A.; Schnorenberg, Alyssa J.; Aurit, Christine M.; Tarima, Sergey; Vogel, Lawrence C.; Harris, Gerald F.
2015-01-01
Currently, there is limited research of the biomechanics of pediatric manual wheelchair mobility. Specifically, the biomechanics of functional tasks and their relationship to joint pain and health is not well understood. To contribute to this knowledge gap, a quantitative rehabilitation approach was applied for characterizing upper extremity biomechanics of manual wheelchair mobility in children and adolescents during propulsion, starting, and stopping tasks. A Vicon motion analysis system captured movement, while a SmartWheel simultaneously collected three-dimensional forces and moments occurring at the handrim. A custom pediatric inverse dynamics model was used to evaluate three-dimensional upper extremity joint motions, forces, and moments of 14 children with spinal cord injury (SCI) during the functional tasks. Additionally, pain and health-related quality of life outcomes were assessed. This research found that joint demands are significantly different amongst functional tasks, with greatest demands placed on the shoulder during the starting task. Propulsion was significantly different from starting and stopping at all joints. We identified multiple stroke patterns used by the children, some of which are not standard in adults. One subject reported average daily pain, which was minimal. Lower than normal physical health and higher than normal mental health was found in this population. It can be concluded that functional tasks should be considered in addition to propulsion for rehabilitation and SCI treatment planning. This research provides wheelchair users and clinicians with a comprehensive, biomechanical, mobility assessment approach for wheelchair prescription, training, and long-term care of children with SCI. PMID:26442251
Biomechanics of Pediatric Manual Wheelchair Mobility.
Slavens, Brooke A; Schnorenberg, Alyssa J; Aurit, Christine M; Tarima, Sergey; Vogel, Lawrence C; Harris, Gerald F
2015-01-01
Currently, there is limited research of the biomechanics of pediatric manual wheelchair mobility. Specifically, the biomechanics of functional tasks and their relationship to joint pain and health is not well understood. To contribute to this knowledge gap, a quantitative rehabilitation approach was applied for characterizing upper extremity biomechanics of manual wheelchair mobility in children and adolescents during propulsion, starting, and stopping tasks. A Vicon motion analysis system captured movement, while a SmartWheel simultaneously collected three-dimensional forces and moments occurring at the handrim. A custom pediatric inverse dynamics model was used to evaluate three-dimensional upper extremity joint motions, forces, and moments of 14 children with spinal cord injury (SCI) during the functional tasks. Additionally, pain and health-related quality of life outcomes were assessed. This research found that joint demands are significantly different amongst functional tasks, with greatest demands placed on the shoulder during the starting task. Propulsion was significantly different from starting and stopping at all joints. We identified multiple stroke patterns used by the children, some of which are not standard in adults. One subject reported average daily pain, which was minimal. Lower than normal physical health and higher than normal mental health was found in this population. It can be concluded that functional tasks should be considered in addition to propulsion for rehabilitation and SCI treatment planning. This research provides wheelchair users and clinicians with a comprehensive, biomechanical, mobility assessment approach for wheelchair prescription, training, and long-term care of children with SCI.
EPA's Office of Research and Development and Office of Water/Water Security Division have jointly developed a Response Protocol Toolbox (RPTB) to address the complex, multi-faceted challenges of a water utility's planning and response to intentional contamination of drinking wate...
Human Capital Challenges: Taking Us Into the 21st Century
2011-01-24
Defense Health Headquarters (DHHQ) JTF CapMed and related joint initiatives Federal workers paid too much? NSPS Repeal 2010 Military Health...For Succession Planning Workforce planning (Mission Critical Occs) – Competency Development “Growing Our Own” – Legislative Initiatives
Learning Completable Reactive Plans through Achievability Proofs
1990-05-01
34 Proceedings of The Eleventh International Joint Conference on Artificial Intelligence, Detroit, MI, Au- gust 1989, pp. 918-923. [Thomas68] G. B. Thomas ... Calculus and Analytic Geometry, Addison-Wesley, Reading, MA, 1968. [Tumey89] J. Turney and A. Segre, "SEPIA: An Experiment in Integrated Planning and
Optimizing the DoD Supply Chain for the Future Joint Force
2013-05-01
4 Sunil Chopra and Peter Meindl, Supply Chain Management: Strategy, Planning, and Operation, 5th ed. (Boston: Pearson Education, Inc., 2013), 339...Arlington, VA: Lexington Institute, 2005. Chopra, Sunil and Peter Meindl. Supply Chain Management: Strategy, Planning, and Operation. 5th ed. Boston
7 CFR 550.16 - Project development.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 7 Agriculture 6 2010-01-01 2010-01-01 false Project development. 550.16 Section 550.16 Agriculture... § 550.16 Project development. REE provides partial funding to Cooperators to support research projects... the REE Agency's ADODR shall jointly develop the following documentation: (a) Project plan. A plan...
7 CFR 550.16 - Project development.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 7 Agriculture 6 2014-01-01 2014-01-01 false Project development. 550.16 Section 550.16 Agriculture... § 550.16 Project development. REE provides partial funding to Cooperators to support research projects... the REE Agency's ADODR shall jointly develop the following documentation: (a) Project plan. A plan...
7 CFR 550.16 - Project development.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 7 Agriculture 6 2013-01-01 2013-01-01 false Project development. 550.16 Section 550.16 Agriculture... § 550.16 Project development. REE provides partial funding to Cooperators to support research projects... the REE Agency's ADODR shall jointly develop the following documentation: (a) Project plan. A plan...
Ren, Yupeng; Kang, Sang Hoon; Park, Hyung-Soon; Wu, Yi-Ning; Zhang, Li-Qun
2013-05-01
Arm impairments in patients post stroke involve the shoulder, elbow and wrist simultaneously. It is not very clear how patients develop spasticity and reduced range of motion (ROM) at the multiple joints and the abnormal couplings among the multiple joints and the multiple degrees-of-freedom (DOF) during passive movement. It is also not clear how they lose independent control of individual joints/DOFs and coordination among the joints/DOFs during voluntary movement. An upper limb exoskeleton robot, the IntelliArm, which can control the shoulder, elbow, and wrist, was developed, aiming to support clinicians and patients with the following integrated capabilities: 1) quantitative, objective, and comprehensive multi-joint neuromechanical pre-evaluation capabilities aiding multi-joint/DOF diagnosis for individual patients; 2) strenuous and safe passive stretching of hypertonic/deformed arm for loosening up muscles/joints based on the robot-aided diagnosis; 3) (assistive/resistive) active reaching training after passive stretching for regaining/improving motor control ability; and 4) quantitative, objective, and comprehensive neuromechanical outcome evaluation at the level of individual joints/DOFs, multiple joints, and whole arm. Feasibility of the integrated capabilities was demonstrated through experiments with stroke survivors and healthy subjects.
Cossich, Victor; Mallrich, Frédéric; Titonelli, Victor; de Sousa, Eduardo Branco; Velasques, Bruna; Salles, José Inácio
2014-01-01
To ascertain whether the proprioceptive deficit in the sense of joint position continues to be present when patients with a limb presenting a deficient anterior cruciate ligament (ACL) are assessed by testing their active reproduction of joint position, in comparison with the contralateral limb. Twenty patients with unilateral ACL tearing participated in the study. Their active reproduction of joint position in the limb with the deficient ACL and in the healthy contralateral limb was tested. Meta-positions of 20% and 50% of the maximum joint range of motion were used. Proprioceptive performance was determined through the values of the absolute error, variable error and constant error. Significant differences in absolute error were found at both of the positions evaluated, and in constant error at 50% of the maximum joint range of motion. When evaluated in terms of absolute error, the proprioceptive deficit continues to be present even when an active evaluation of the sense of joint position is made. Consequently, this sense involves activity of both intramuscular and tendon receptors.
Lins, Carolina Freitas; Lima de Sá Ribeiro, Daniel; Dourado Santos, Willer Gonçalves; Rosa, Genevievi; Machicado, Viviane; Pedreira, Ana Luisa; Pimenta da Fonseca, Emanuela; Mota Duque Sousa, Anna Paula; Rodrigues Silva, Carla Baleeiro; Matos, Marcos Antonio Almeida; Santiago, Mittermayer Barreto
2017-09-01
Diagnosis of synovitis/tenosynovitis by physical examination can be difficult. Ultrasound (US) can be an effective tool for the evaluation of joint involvement in systemic lupus erythematosus (SLE). This study will describe musculoskeletal findings by US in SLE patients and the evaluation of their correlation with physical examination. SLE patients underwent clinical/sonographic evaluation of hand/wrists. In total, 896 joints were evaluated: at least 1 change on physical examination was found in 136 joints and at least 1 US abnormality was found in 65 of 896 joints. Out of the 65 joints with US changes, only 13 had findings on physical examination. Conversely, 111 joints had tenderness on physical examination with no sonographic abnormalities. Tenosynovitis was statistically significant more frequently with joint edema (41%) (p = 0.0003). US can detect musculoskeletal changes in only a minority of symptomatic SLE patients. Clinical findings may be related to some reasons that cannot be explained using US. Copyright © 2017 World Federation for Ultrasound in Medicine & Biology. Published by Elsevier Inc. All rights reserved.
Woodford Guegan, Eleanor; Cook, Andrew
2014-06-01
The European network for Health Technology Assessment Joint Action (EUnetHTA JA) project's overarching objective was to 'establish an effective and sustainable HTA [Health technology assessment] collaboration in Europe that brings added value at the regional, national and European level'. Specific objectives were to develop a strategy and business model for sustainable European collaboration on HTA, develop HTA tools and methods and promote good practice in HTA methods and processes. We describe activities performed on behalf of the National Institute for Health Research HTA programme; evaluating the project processes and developing a data set for a registry of planned clinical studies of relevance to public funders. Annual self-completion online questionnaires were sent to project participants and external stakeholders to identify their views about the project processes. Documentary review was undertaken at the project end on the final technical reports from the work packages to examine whether or not their deliverables had been achieved. The project's impact was assessed by whether or not the deliverables were produced, the objectives met and additional 'added value' generated. The project's effectiveness was evaluated by its processes, communication, administration, workings of individual work packages and involvement of external stakeholders. A two-stage Delphi exercise was undertaken to identify the data elements that should be included in a registry of planned clinical studies of relevance to public funders. The data set was validated by an efficacy testing exercise. High response rates were achieved for the questionnaires sent to project participants and this was attributed to the evidence-based strategy implemented. Response rates to questionnaires sent to external stakeholders were disappointingly lower. Most of the high-level objectives were achieved, although applying the developed tools in practice will be implemented in the European network for Health Technology Assessment Joint Action 2 (EUnetHTA JA2). Most work packages produced their planned deliverables. Networking emerged as one of the main benefits of the project and face-to-face meetings were important. However, the overarching objective did not appear to have been met because there will be a follow-up EUnetHTA JA2 project (reliant on project funding) before the establishment of any permanent network. Twelve organisations from three continents participated in the Delphi exercise to develop the data set. It was demonstrated that a registry for matching pragmatic clinical studies under consideration by funders could be built on a very small data set. This would include 10 unique items, of which five are required to describe a study and the rest are metadata. In the test sample the data set with an appropriate matching rule was able to deliver a sensitivity of between 50% and 100% and a specificity of between 43% and 86% for matching different elements. A number of recommendations have been made for the next EUnetHTA JA2 project and its evaluation. This included that the evaluation of the EUnetHTA JA2 project should extend beyond the end of the project to allow assessment of its impact; that the quality, usability and cost-effectiveness of tools in 'real-world HTA practice' should be assessed and tangible benefits of international networking should be evaluated. It is worth proceeding to develop a database registry aimed at identifying trials in development based on the data set developed. The study was funded by the National Institute for Health Research Health Technology Assessment programme (50%) and the European Union Commission (50%).
Woodford Guegan, Eleanor; Cook, Andrew
2014-01-01
BACKGROUND The European network for Health Technology Assessment Joint Action (EUnetHTA JA) project's overarching objective was to 'establish an effective and sustainable HTA [Health technology assessment] collaboration in Europe that brings added value at the regional, national and European level'. Specific objectives were to develop a strategy and business model for sustainable European collaboration on HTA, develop HTA tools and methods and promote good practice in HTA methods and processes. We describe activities performed on behalf of the National Institute for Health Research HTA programme; evaluating the project processes and developing a data set for a registry of planned clinical studies of relevance to public funders. METHODS Annual self-completion online questionnaires were sent to project participants and external stakeholders to identify their views about the project processes. Documentary review was undertaken at the project end on the final technical reports from the work packages to examine whether or not their deliverables had been achieved. The project's impact was assessed by whether or not the deliverables were produced, the objectives met and additional 'added value' generated. The project's effectiveness was evaluated by its processes, communication, administration, workings of individual work packages and involvement of external stakeholders. A two-stage Delphi exercise was undertaken to identify the data elements that should be included in a registry of planned clinical studies of relevance to public funders. The data set was validated by an efficacy testing exercise. RESULTS AND DISCUSSION High response rates were achieved for the questionnaires sent to project participants and this was attributed to the evidence-based strategy implemented. Response rates to questionnaires sent to external stakeholders were disappointingly lower. Most of the high-level objectives were achieved, although applying the developed tools in practice will be implemented in the European network for Health Technology Assessment Joint Action 2 (EUnetHTA JA2). Most work packages produced their planned deliverables. Networking emerged as one of the main benefits of the project and face-to-face meetings were important. However, the overarching objective did not appear to have been met because there will be a follow-up EUnetHTA JA2 project (reliant on project funding) before the establishment of any permanent network. Twelve organisations from three continents participated in the Delphi exercise to develop the data set. It was demonstrated that a registry for matching pragmatic clinical studies under consideration by funders could be built on a very small data set. This would include 10 unique items, of which five are required to describe a study and the rest are metadata. In the test sample the data set with an appropriate matching rule was able to deliver a sensitivity of between 50% and 100% and a specificity of between 43% and 86% for matching different elements. CONCLUSIONS A number of recommendations have been made for the next EUnetHTA JA2 project and its evaluation. This included that the evaluation of the EUnetHTA JA2 project should extend beyond the end of the project to allow assessment of its impact; that the quality, usability and cost-effectiveness of tools in 'real-world HTA practice' should be assessed and tangible benefits of international networking should be evaluated. It is worth proceeding to develop a database registry aimed at identifying trials in development based on the data set developed. FUNDING The study was funded by the National Institute for Health Research Health Technology Assessment programme (50%) and the European Union Commission (50%). PMID:24913263
NextGen Weather Plan, Version 1.1
2009-09-17
values of weather parameters at a station or over an area. In this paper, we often refer to aeronautical climatology, which is the application of the data...Joint Planning and Development Office NEXTGEN Weather Plan Version 1.1 Version 1.1 i September 17, 2009 Report Documentation Page Form...COVERED 00-00-2009 to 00-00-2009 4. TITLE AND SUBTITLE NextGen Weather Plan 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6
Joint Planning and Development Office Work Plan FY10
2010-01-01
IPSA ) Division will make refinements to the NextGen Portfolio Analysis. In addition, IPSA will work with the Department of Defense (DoD) to define and...Submitted Interagency Portfolio and Systems Analysis ( IPSA ) DRAFT DoD Portfolio Analysis Criteria BASELINE DoD Portfolio Analysis Criteria DRAFT...WG Work Plan Review Prototype Capability Selected and Defined CHAs Complete Safety Metrics for IPSA Complete FINAL Prototype Report FINAL
Chromospheric Lyman-Alpha SpectroPolarimeter (CLASP)
NASA Technical Reports Server (NTRS)
Kano, Ryohei; Bando, Takamasa; Narukage, Noriyuki; Ishikawa, Ryoko; Kubo, Masahito; Katsukawa, Yukio; Ishikawa, Shin-nosuke; Hara, Hirohisa; Suematsu, Yoshinori; Giono, Gabriel;
2015-01-01
Chromosphere, the transition layer of the sun is a region to switch to the magnetic pressure dominated from plasma pressure dominated, simultaneous observation of the detailed magnetic field measurement and plasma of dynamic phenomenon here is what is the frontier of the next solar physics. As This is a challenge that has just mentioned, even the next solar observation satellite plan SOLAR-C, in the experiments we had used a NASA sounding rocket for the first time in the SOLAR-C plan, will address the chromosphere-transition layer magnetic field measurement there. It is, is a Chromospheric Lyman-Alpha Spectro-Polarimeter (CLASP) plan, the linear polarization of Lyman ?? emission lines chromosphere-transition layer shoots (121.6nm) were detected in 0.1 percent of high accuracy, a new technique called Hanre effect I get the magnetic field information of chromosphere-transition layer. In Japan, the US and Europe joint observation in November 2012 as a rocket experiment is adopted to NASA this plan that full-scale start-up, start from assembly work is 2014 spring flight observation device, currently, it is where the alignment of the optical elements have been implemented. After this, it is planned to continue with the performance evaluation towards the observation implementation of summer 2015. In addition to once again explain the contents of the plan In this presentation, we report an overview of the entire development and preparation current status.
Planning and conducting medical support to joint operations.
Hughes, A S
2000-01-01
Operations are core business for all of us and the PJHQ medical cell is at the heart of this process. With the likelihood of a continuing UK presence in the Balkans for some time to come, the challenge of meeting this and any other new operational commitments will continue to demand a flexible and innovative approach from all concerned. These challenges together with the Joint and multinational aspects of the job make the PJHQ medical cell a demanding but rewarding place to work and provide a valuable Joint staff training opportunity for the RNMS.
The role of proprioception and neuromuscular stability in carpal instabilities.
Hagert, E; Lluch, A; Rein, S
2016-01-01
Carpal stability has traditionally been defined as dependent on the articular congruity of joint surfaces, the static stability maintained by intact ligaments, and the dynamic stability caused by muscle contractions resulting in a compression of joint surfaces. In the past decade, a fourth factor in carpal stability has been proposed, involving the neuromuscular and proprioceptive control of joints. The proprioception of the wrist originates from afferent signals elicited by sensory end organs (mechanoreceptors) in ligaments and joint capsules that elicit spinal reflexes for immediate joint stability, as well as higher order neuromuscular influx to the cerebellum and sensorimotor cortices for planning and executing joint control. The aim of this review is to provide an understanding of the role of proprioception and neuromuscular control in carpal instabilities by delineating the sensory innervation and the neuromuscular control of the carpus, as well as descriptions of clinical applications of proprioception in carpal instabilities. © The Author(s) 2015.
ERIC Educational Resources Information Center
Chatterji, Madhabi
2005-01-01
This case study examines the applicability of 1994 standards, offered by the Joint Committee on Standards for Educational Evaluation, to evaluations conducted in international contexts. The work is undertaken in response to an open invitation from the Joint Committee in its 1994 publication. The article addresses two purposes. First, it asks…
Comparison of techniques for correction of magnification of pelvic X-rays for hip surgery planning.
The, Bertram; Kootstra, Johan W J; Hosman, Anton H; Verdonschot, Nico; Gerritsma, Carina L E; Diercks, Ron L
2007-12-01
The aim of this study was to develop an accurate method for correction of magnification of pelvic x-rays to enhance accuracy of hip surgery planning. All investigated methods aim at estimating the anteroposterior location of the hip joint in supine position to correctly position a reference object for correction of magnification. An existing method-which is currently being used in clinical practice in our clinics-is based on estimating the position of the hip joint by palpation of the greater trochanter. It is only moderately accurate and difficult to execute reliably in clinical practice. To develop a new method, 99 patients who already had a hip implant in situ were included; this enabled determining the true location of the hip joint deducted from the magnification of the prosthesis. Physical examination was used to obtain predictor variables possibly associated with the height of the hip joint. This included a simple dynamic hip joint examination to estimate the position of the center of rotation. Prediction equations were then constructed using regression analysis. The performance of these prediction equations was compared with the performance of the existing protocol. The mean absolute error in predicting the height of the hip joint center using the old method was 20 mm (range -79 mm to +46 mm). This was 11 mm for the new method (-32 mm to +39 mm). The prediction equation is: height (mm) = 34 + 1/2 abdominal circumference (cm). The newly developed prediction equation is a superior method for predicting the height of the hip joint center for correction of magnification of pelvic x-rays. We recommend its implementation in the departments of radiology and orthopedic surgery.
Interactional leader–follower sensorimotor communication strategies during repetitive joint actions
Candidi, Matteo; Curioni, Arianna; Donnarumma, Francesco; Sacheli, Lucia Maria; Pezzulo, Giovanni
2015-01-01
Non-verbal communication is the basis of animal interactions. In dyadic leader–follower interactions, leaders master the ability to carve their motor behaviour in order to ‘signal’ their future actions and internal plans while these signals influence the behaviour of follower partners, who automatically tend to imitate the leader even in complementary interactions. Despite their usefulness, signalling and imitation have a biomechanical cost, and it is unclear how this cost–benefits trade-off is managed during repetitive dyadic interactions that present learnable regularities. We studied signalling and imitation dynamics (indexed by movement kinematics) in pairs of leaders and followers during a repetitive, rule-based, joint action. Trial-by-trial Bayesian model comparison was used to evaluate the relation between signalling, imitation and pair performance. The different models incorporate different hypotheses concerning the factors (past interactions versus online movements) influencing the leader's signalling (or follower's imitation) kinematics. This approach showed that (i) leaders' signalling strategy improves future couple performance, (ii) leaders used the history of past interactions to shape their signalling, (iii) followers' imitative behaviour is more strongly affected by the online movement of the leader. This study elucidates the ways online sensorimotor communication help individuals align their task representations and ultimately improves joint action performance. PMID:26333815
Interactional leader-follower sensorimotor communication strategies during repetitive joint actions.
Candidi, Matteo; Curioni, Arianna; Donnarumma, Francesco; Sacheli, Lucia Maria; Pezzulo, Giovanni
2015-09-06
Non-verbal communication is the basis of animal interactions. In dyadic leader-follower interactions, leaders master the ability to carve their motor behaviour in order to 'signal' their future actions and internal plans while these signals influence the behaviour of follower partners, who automatically tend to imitate the leader even in complementary interactions. Despite their usefulness, signalling and imitation have a biomechanical cost, and it is unclear how this cost-benefits trade-off is managed during repetitive dyadic interactions that present learnable regularities. We studied signalling and imitation dynamics (indexed by movement kinematics) in pairs of leaders and followers during a repetitive, rule-based, joint action. Trial-by-trial Bayesian model comparison was used to evaluate the relation between signalling, imitation and pair performance. The different models incorporate different hypotheses concerning the factors (past interactions versus online movements) influencing the leader's signalling (or follower's imitation) kinematics. This approach showed that (i) leaders' signalling strategy improves future couple performance, (ii) leaders used the history of past interactions to shape their signalling, (iii) followers' imitative behaviour is more strongly affected by the online movement of the leader. This study elucidates the ways online sensorimotor communication help individuals align their task representations and ultimately improves joint action performance. © 2015 The Author(s).
The Danish Environmental Technology Verification program (DANETV) Water Test Centre operated by DHI, is supported by the Danish Ministry for Science, Technology and Innovation. DANETV, the United States Environmental Protection Agency Environmental Technology Verification Progra...
Effects-Based Decision Making in the War on Terror
2005-06-01
systems. The first “ actionable ” publication in the field of EBO was Thinking Effects, Effects-Based Methodology for Joint Operations by Mann...of those issues . First, the concept of a center of gravity has been a core part of military planning since Clausewitz. Joint Publication 1-02...Ohio APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED. The views expressed in this thesis are
ERIC Educational Resources Information Center
Baker, Octave V.
One of seven career education programs chosen for nationwide dissemination by the Department of Health, Education, and Welfare's Joint Dissemination Review Panel (JDRP), Project CERES (Career Education Responsive to Every Student) is being conducted for grades K-6 with planned expansion to grades 7-12. For the years 1972-76, it received funding…
30 CFR 582.5 - Disclosure of data and information to the public.
Code of Federal Regulations, 2012 CFR
2012-07-01
... public. 582.5 Section 582.5 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF THE... or more leases, to ensure proper Mining Plans for a common orebody, or to promote operational safety...), unitization agreement, or joint Mining Plan. (c) Geophysical data, processed geophysical information, and...
30 CFR 582.5 - Disclosure of data and information to the public.
Code of Federal Regulations, 2013 CFR
2013-07-01
... public. 582.5 Section 582.5 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF THE... or more leases, to ensure proper Mining Plans for a common orebody, or to promote operational safety...), unitization agreement, or joint Mining Plan. (c) Geophysical data, processed geophysical information, and...
30 CFR 582.5 - Disclosure of data and information to the public.
Code of Federal Regulations, 2014 CFR
2014-07-01
... public. 582.5 Section 582.5 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF THE... or more leases, to ensure proper Mining Plans for a common orebody, or to promote operational safety...), unitization agreement, or joint Mining Plan. (c) Geophysical data, processed geophysical information, and...
Abstract:Managing urban water infrastructures faces the challenge of jointly dealing with assets of diverse types, useful life, cost, ages and condition. Service quality and sustainability require sound long-term planning, well aligned with tactical and operational planning and m...
34 CFR 491.21 - What selection criteria does the Secretary use?
Code of Federal Regulations, 2011 CFR
2011-07-01
... instructional plans or individual education plans that are developed jointly by the student and the teacher and... otherwise eligible to participate are selected without regard to race, color, national origin, gender, age... race, color, national origin, gender, age, or handicapping condition. (2) To determine personnel...
The Departmental Planning Team: A Bridge to the Future.
ERIC Educational Resources Information Center
Cross, Cynthia S.; And Others
1989-01-01
One of the primary vehicles for coordinating information technology services at the University of Michigan is the Departmental Planning Team, a joint effort of the administrative and academic computing units of the University's Information Technology Division. The evolution of this group and its activities are described. (Author/MLW)
77 FR 41164 - Joint Subcommittee on Aquaculture Research and Development Strategic Plan
Federal Register 2010, 2011, 2012, 2013, 2014
2012-07-12
... Development Strategic Plan AGENCIES: Agricultural Research Service (ARS), U.S. Department of Agriculture (USDA... Agricultural Research Service (USDA-ARS) announce on behalf of the Federal Interagency Working Group on... http://www.ars.usda.gov/research/programs/programs.htm?np_code=106&docid=22641 . DATES: Written...
Planning for Success: Developing an Economic Planning Cell for the Operational Level Commander
2011-05-04
Laura Landes, “ Follow the Money : The Army Finance Corps and Iraqi Financial Independence,” Military Review (March – April 2008): 85 ii Joint...accessed 23 March, 2011). Landes, Laura. “ Follow the Money : The Army Finance Corps and Iraqi Financial Independence,” Military Review (March
Delivering Innovation: The Joint Concept Development and Experimentation Campaign Plan FY2004-2011
2004-01-26
Janushkowsky (STRATCOM), Maj Gen Stenner (SOUTHCOM), LTC Butts (TRANSCOM) Campaign Plan; J9 UpdateFace to Face Conference12 Feb 2003 COL (P) Verbeck (EUCOM... Stenner (SOUTHCOM), Ms. Young (TRANSCOM), MG Higgins (USFK), Dr. Hanley (OSD-OFT), RADM Gallagher (ACT) Combatant Commander Attendees IWS IWS VTC
75 FR 62507 - New England Fishery Management Council; Public Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2010-10-12
... Committee and Plan Development Team in October 2010 to consider actions affecting New England fisheries in... jointly with the Habitat Plan Development Team to discuss management alternatives related to minimizing... Council's EFH Omnibus Amendment 2. The goal of the meeting is to craft a series of management alternatives...
77 FR 38680 - NASA Advisory Council; Human Exploration and Operations Committee; Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2012-06-28
... persons, scientific and technical information relevant to program planning. DATES: Monday, July 23, 2012... Goddard Space Flight Center (GSFC), Building 1, Room E100D, 8800 Greenbelt Road, Greenbelt, MD 20771. FOR... Session with the NAC Science Committee on Mars Program Planning Group and Joint Robotic Precursor...
Manipulation strategies for massive space payloads
NASA Technical Reports Server (NTRS)
Book, Wayne J.
1991-01-01
Motion planning and control for the joints of flexible manipulators are discussed. Specific topics covered include control of a flexible braced manipulator, control of a small working robot on a large flexible manipulator to suppress vibrations, control strategies for ensuring cooperation among disparate manipulators, and motion planning for robots in free-fall.
18 CFR 707.8 - Typical classes of action requiring similar treatment under NEPA.
Code of Federal Regulations, 2013 CFR
2013-04-01
... 18 Conservation of Power and Water Resources 2 2013-04-01 2012-04-01 true Typical classes of... Resources WATER RESOURCES COUNCIL COMPLIANCE WITH THE NATIONAL ENVIRONMENTAL POLICY ACT (NEPA) Water... submittal of regional water resources management plans (comprehensive, coordinated, joint plans or elements...
18 CFR 707.8 - Typical classes of action requiring similar treatment under NEPA.
Code of Federal Regulations, 2012 CFR
2012-04-01
... 18 Conservation of Power and Water Resources 2 2012-04-01 2012-04-01 false Typical classes of... Resources WATER RESOURCES COUNCIL COMPLIANCE WITH THE NATIONAL ENVIRONMENTAL POLICY ACT (NEPA) Water... submittal of regional water resources management plans (comprehensive, coordinated, joint plans or elements...
18 CFR 707.8 - Typical classes of action requiring similar treatment under NEPA.
Code of Federal Regulations, 2014 CFR
2014-04-01
... 18 Conservation of Power and Water Resources 2 2014-04-01 2014-04-01 false Typical classes of... Resources WATER RESOURCES COUNCIL COMPLIANCE WITH THE NATIONAL ENVIRONMENTAL POLICY ACT (NEPA) Water... submittal of regional water resources management plans (comprehensive, coordinated, joint plans or elements...
18 CFR 707.8 - Typical classes of action requiring similar treatment under NEPA.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 18 Conservation of Power and Water Resources 2 2011-04-01 2011-04-01 false Typical classes of... Resources WATER RESOURCES COUNCIL COMPLIANCE WITH THE NATIONAL ENVIRONMENTAL POLICY ACT (NEPA) Water... submittal of regional water resources management plans (comprehensive, coordinated, joint plans or elements...
18 CFR 707.8 - Typical classes of action requiring similar treatment under NEPA.
Code of Federal Regulations, 2010 CFR
2010-04-01
... 18 Conservation of Power and Water Resources 2 2010-04-01 2010-04-01 false Typical classes of... Resources WATER RESOURCES COUNCIL COMPLIANCE WITH THE NATIONAL ENVIRONMENTAL POLICY ACT (NEPA) Water... submittal of regional water resources management plans (comprehensive, coordinated, joint plans or elements...
EPA's National Homeland Security Research Center (Office of Research and Development) and Water Protection Task Force (Office of Water) have jointly developed a draft analytical guide that may be used by laboratories to plan for and provide support to a drinking water utility...
USE OF INTEGRATED PLANNING TOOLS FOR REVITALIZATION: SMARTE (U.S.) AND START-UP PLAN (GERMANY)
In 2001, the US-German Bilateral Working Group (BWG) identified more than 40 obstacles to site revitalization which occurred in both countries. From 2001-2005, the BWG developed tools and techniques for overcoming these obstacles. Five joint workshops were held on the following r...
ERIC Educational Resources Information Center
Ohio Educational Library/Media Association, Columbus.
Designed to aid in planning the best use of cable television in a particular educational situation, this pamphlet was prepared by a joint committee of the Ohio Educational Library Media Association and the Greater Miami Valley Instructional Television Council in order to share their plans, experiences, problems, and solutions with others who are…
Lenzlinger-Asprion, Rahel; Keller, Niculina; Meichtry, André; Luomajoki, Hannu
2017-01-31
Hip joint complaints are a problem associated with increasing age and impair the mobility of a large section of the elderly population. Reliable and valid tests are necessary for a thorough investigation of a joint. A fundamental function of the hip joint is movement control and a test of this function forms a part of the standard examination. Until now there have been few scientific studies which specifically investigate the reliability of measurement tests of movement control of the hip joint. The aim of this study was to examine the intratester and intertester reliability of the movement control tests of the hip joint which are in use in current clinical practice. Sixteen participants with hip joint complaints and 14 without hip joint impairment were recruited. All participants performed five active movement control tests for the hip joint and were video filmed whilst performing these tests. These films formed the basis for the evaluation and were assessed by two independent physiotherapists. For the intertester and intratester reliability calculations specially set weighted kappa values and the calculated percentages were used. The intertester reliability of the five examined movement control tests of the hip joint showed good to almost perfect values (weighted kappa (wk) = 0.56-0.87). The intratester reliability of the more experienced evaluator A was better in regards to the less experienced evaluator B (average wk = 0.62 vs 0.38). The visual evaluation of movement control tests of the hip joint is especially reliable when carried out by an experienced evaluator. 4 out of 5 tests also showed good results for intertester reliability and support their use in clinical practice.
Seo, Jimyung; Lee, Minseok; Choi, Min Ju; Zheng, Zhenlong; Cho, Arthur; Bang, Dongsik; Kim, Do Young
2015-01-01
Behçet's disease (BD) is a multisystemic inflammatory disease with articular involvement. Non-specific arthralgia without objective signs of arthritis, such as swelling or effusion, is common in such patients. Thus, an accurate diagnosis of joint involvement may be challenging for dermatologists. To evaluate the validity of (99m)Tc-methylene diphosphonate (Tc-99m-MDP) bone scintigraphy for joint involvement assessment in patients with BD. In 211 patients with BD who had scintigraphic evaluations due to joint symptoms, agreement between bone scintigraphy findings and clinically evaluated joint complaints was retrospectively assessed using Cohen's kappa (κ) statistic. A patient subset (n = 104) showing agreement between joint complaints and scintigraphy results was re-evaluated by a rheumatologist to determine the level of diagnostic specificity attained by combining bone scintigraphy with clinical examinations of dermatologists. The total kappa value (211 patients) was 0.604, indicating fair agreement between joint complaints and scintigraphy results. Individual analysis of eleven joint categories revealed statistically significant correlations for wrist (κ = 0.677), shoulder (κ = 0.661), and foot joints (κ = 0.618). Of the 104 referrals to a rheumatologist, 95 (91.34%) were confirmed as having BD-associated articular involvement. Joint acral areas (e.g., foot, hand, wrist and shoulder) that had the highest kappa value correlations also ranked highest in diagnostic specificity. Bone scintigraphy presents a simple and useful option for dermatologists to assess joint involvement in BD patients, especially for specific anatomic sites.
Romañach, Stephanie S.; Conzelmann, Craig; Daugherty, Adam; Lorenz, Jerome L.; Hunnicutt, Christina; Mazzotti, Frank J.
2011-01-01
Estuarine fish serve as an important prey base in the Greater Everglades ecosystem for key fauna such as wading birds, crocodiles, alligators, and piscivorous fishes. Human-made changes to freshwater flow across the Greater Everglades have resulted in less freshwater flow into the fringing estuaries and coasts. These changes in freshwater input have altered salinity patterns and negatively affected primary production of the estuarine fish prey base. Planned restoration projects should affect salinity and water depth both spatially and temporally and result in an increase in appropriate water conditions in areas occupied by estuarine fish. To assist in restoration planning, an ecological model of estuarine prey fish biomass availability was developed as an evaluation tool to aid in the determination of acceptable ranges of salinity and water depth. Comparisons of model output to field data indicate that the model accurately predicts prey biomass in the estuarine regions of the model domain. This model can be used to compare alternative restoration plans and select those that provide suitable conditions.
A novel method for trajectory planning of cooperative mobile manipulators.
Bolandi, Hossein; Ehyaei, Amir Farhad
2011-01-01
We have designed a two-stage scheme to consider the trajectory planning problem of two mobile manipulators for cooperative transportation of a rigid body in the presence of static obstacles. In the first stage, with regard to the static obstacles, we develop a method that searches the workspace for the shortest possible path between the start and goal configurations, by constructing a graph on a portion of the configuration space that satisfies the collision and closure constraints. The final stage is to calculate a sequence of time-optimal trajectories to go between the consecutive points of the path, with regard to the nonholonomic constraints and the maximum allowed joint accelerations. This approach allows geometric constraints such as joint limits and closed-chain constraints, along with differential constraints such as nonholonomic velocity constraints and acceleration limits, to be incorporated into the planning scheme. The simulation results illustrate the effectiveness of the proposed method.
A Novel Method for Trajectory Planning of Cooperative Mobile Manipulators
Bolandi, Hossein; Ehyaei, Amir Farhad
2011-01-01
We have designed a two-stage scheme to consider the trajectory planning problem of two mobile manipulators for cooperative transportation of a rigid body in the presence of static obstacles. In the first stage, with regard to the static obstacles, we develop a method that searches the workspace for the shortest possible path between the start and goal configurations, by constructing a graph on a portion of the configuration space that satisfies the collision and closure constraints. The final stage is to calculate a sequence of time-optimal trajectories to go between the consecutive points of the path, with regard to the nonholonomic constraints and the maximum allowed joint accelerations. This approach allows geometric constraints such as joint limits and closed-chain constraints, along with differential constraints such as nonholonomic velocity constraints and acceleration limits, to be incorporated into the planning scheme. The simulation results illustrate the effectiveness of the proposed method. PMID:22606656
The experience of a nationwide Community of Practice to set up Regional Prevention Plans in Italy.
Giusti, Angela; Perra, Alberto; Lombardo, Flavia
2017-07-27
In 2010, the Italian Ministry of Health decided to start the planning process to elaborate the National Plan of Prevention 2010-2012 jointly with the 21 Regions. The National Institute of Health was responsible for supporting regional planners (RPs) by an original participatory approach of a web-based Community of Practice (CoP) to set up their own Regional Plans of Prevention. In this paper, we summarise the theoretical framework adopted, the main phases characterising the lifecycle of the nationwide CoP, the evaluation approach adopted and its findings. Following the CoP theoretical framework from Wenger, an initial group of RPs were trained on Project Cycle Management as a planning method and thereafter they started interacting on a web-based Moodle platform for 8 months. The CoP evaluation mainly took into account aspects of 'immediate value', such as members interactions within the website, and several quantitative and qualitative tools were used to monitor changes over time. Data were retrieved from Moodle statistics or directly from the RPs by the means of a Knowledge, Attitude and Practice survey, a reaction survey, SWOT analysis and focus groups. The level of individual RPs knowledge increased after the initial course from 55.7% to 75%, attitudes and competence perception about the planning process method also showed an overall favourable change. During the CoP life span, the number of members increased from the original 98 RPs to include up to 600 new members on the basis of spontaneous demand. From April 2010 to January 2011, the 'vital signs' of the CoP were monitored, including RP logins (13,450 total logins and 3744 unique logins), views (27,522) and posts (1606) distributed in 326 forum discussion threads. Data and information retrieved from quantitative and qualitative evaluation approaches proved to be useful for the management and follow-up of the CoP. The CoP experience was successful as 19 out of 20 Regions submitted their Regional Preventive Plan to their Ministry of Health within the due deadline. The CoP has proved to be an approach able to optimise resources and expertise, capitalising and generating new knowledge. However, more efforts should be deployed to define innovative ways to evaluate its values, tangible and intangible, as well as the return of investment.
Kinematic geometry of osteotomies.
Smith, Erin J; Bryant, J Tim; Ellis, Randy E
2005-01-01
This paper presents a novel method for defining an osteotomy that can be used to represent all types of osteotomy procedures. In essence, we model an osteotomy as a lower-pair mechanical joint to derive the kinematic geometry of the osteotomy. This method was implemented using a commercially available animation software suite in order to simulate a variety of osteotomy procedures. Two osteotomy procedures are presented for a femoral malunion in order to demonstrate the advantages of our kinematic model in developing optimal osteotomy plans. The benefits of this kinematic model include the ability to evaluate the effects of various kinds of osteotomy and the elimination of potentially error-prone radiographic assessment of deformities.
Science support for managing migratory waterfowl.
Fleskes, Joseph P.; Miller, Michael R.; Takekawa, John Y.
2003-01-01
Migratory birds in North America are an international resource shared by Canada, the United States, and Mexico. Ultimate population management authority in the U.S. lies with the U.S. Fish and Wildlife Service (FWS), but states participate in development of management decisions through the Flyway system. The FWS, state wildlife agencies, and nongovernmental organizations participate through independent actions and cooperative Joint Ventures under the North American Waterfowl Management Plan (NAWMP) to acquire, protect, restore, and enhance wetlands and other habitats critical to the long-term conservation of breeding, migrating, and wintering waterfowl. A thorough base of scientific information is required to support and evaluate waterfowl populations and habitat management in North America.
NASA and Deere to study effects of low-g on iron processing
NASA Technical Reports Server (NTRS)
1981-01-01
A technical exchange agreement to study the effects of processing iron alloys in microgravity is described. Alloy solidification experiments are to be performed in the low-g facilities at Marshall Space Center. Deere is to prepare and evaluate the samples, and perform thermal characterization studies of the furnace used for melting and solidifying the samples. Experiment planning and analysis are to be performed jointly and data shared between the two parties. The technical exchange concept, developed by NASA to involve the private sector in low gravity research programs, is described. Other low gravity processing fields in which industry is invited to participate are listed.
Experimental results supporting the determination of service quality objectives for DBS systems
NASA Technical Reports Server (NTRS)
Chouinard, G.; Whyte, W. A., Jr.; Goldberg, A. A.; Jones, B. L.
1985-01-01
A summary of the results of a joint United States and Canadian program on subjective measurements of the picture degradation caused by noise and interference on an NTSC encoded color television signal is given in this paper. The effects of system noise, cochannel and adjacent channel interference, and both single entry and aggregate as well as a combination of these types of interference were subjectively evaluated by expert and nonexpert viewers under reference conditions. These results were used to develop the rationale used at RARC '83 to establish the service quality objective for planning the DBS service for the American continents.
Summary and results of the joint WMD-DAC/Alameda County bioterrorism response plan exercise.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Manley, Dawn Kataoka; Lipkin, Joel; West, Todd H.
2003-11-01
On June 12,2003, the Alameda County Public Health Department and Sandia National Laboratories/CA jointly conducted an exercise that used a Weapons of Mass Destruction-Decision Analysis Center (WMD-DAC) bioterrorism attack simulation to test the effectiveness of the county's emergency response plan. The exercise was driven by an assumed release (in the vicinity of the Berkeley Marina), and subsequent spread, of a small quantity of aerosolized, weapons-grade anthrax spores. The simulation used several key WMD-DAC capabilities, namely: (1) integration with an atmospheric dispersion model to calculate expected dose levels in the affected areas, (2) a individual-tracking capability for both infected and non-infectedmore » persons as they made decisions, sought treatment, and received prophylaxis drugs, and (3) a user interface that allows exercise participants to affect the scenario evolution and outcome. The analysis of the county's response plan included documenting and reviewing the decisions made by participants during the exercise. Twenty-six local and regional officials representing the health care system, emergency medical services and law enforcement were involved in responding to the simulated attack. The results of this joint effort include lessons learned both by the Alameda County officials regarding implementation of their bioterrorism response plan and by the Sandia representatives about conducting exercises of this type. These observations are reviewed in this report, and they form a basis for providing a better understanding of group/individual decision processes and for identifying effective communication options among decision makers.« less
The NASA/DOE/DOD nuclear rocket propulsion project - FY 1991 status
NASA Technical Reports Server (NTRS)
Clark, John S.; Miller, Thomas J.
1991-01-01
NASA has initiated planning and critical technology development for nuclear rocket propulsion systems for Space Exploration Initiative missions to the moon and to Mars. Interagency agreements are being negotiated between NASA, the Department of Energy, and the Department of Defense for joint technology development activities. This paper summarizes the activities of the NASA project planning team in FY 1990 that led to the draft Nuclear Propulsion Project Plan, outlines the FY 1991 Interagency activities, and describes the current status of the project plan.
An evaluation of charity care for tax-exempt hospitals engaging in joint ventures.
Smith, Pamela C
2006-01-01
The study examines whether the level of charity care and financial stability contribute to a nonprofit hospital's motivation for partnering with a for-profit hospital through a joint venture. The Internal Revenue Service (IRS) has heightened its scrutiny of joint ventures within the health care sector. Considering recent calls to investigate the merit of the tax-exempt status of hospitals engaged in joint ventures, this research will assist policy makers in the evaluation of nonprofit hospitals. Constituents will continue to question whether joint ventures contribute to a reduced focus on charitable activities. Results indicate that the propensity to engage in a joint venture significantly increases with increased levels of charity care. Furthermore, nonprofit hospitals with lower profitability are more likely to engage in joint ventures. These results are useful to policy makers when evaluating the level of charity care provided by hospitals seeking alternative strategic alliances. Considering many critics allege hospitals are reducing the provision of charity care to the community, it is imperative for management to be conscious of the impact of joint ventures on the provision of charity care.
Experimental evaluation of joint designs for a space-shuttle orbiter ablative leading edge
NASA Technical Reports Server (NTRS)
Tompkins, S. S.; Kabana, W. P.
1975-01-01
The thermal performance of two types of ablative leading-edge joints for a space-shuttle orbiter were tested and evaluated. Chordwise joints between ablative leading-edge segments, and spanwise joints between ablative leading-edge segments and reusable surface insulation tiles were exposed to simulated shuttle heating environments. The data show that the thermal performance of models with chordwise joints to be as good as jointless models in simulated ascent-heating and orbital cold-soak environments. The suggestion is made for additional work on the joint seals, and, in particular, on the effects of heat-induced seal-material surface irregularities on the local flow.
Archavlis, Eleftherios; Amr, Nimer; Kantelhardt, Sven Rainer; Giese, Alf
2018-01-01
Minimally invasive pedicle screw placement may have a higher incidence of violation of the superior cephalad unfused facet joint. We investigated the incidence and risk factors of upper facet joint violation in percutaneous robot-assisted instrumentation versus percutaneous fluoroscopy-guided and open transpedicular instrumentation. A retrospective study including all consecutive patients who underwent lumbar instrumentation, fusion, and decompression for spondylolisthetic stenosis and degenerative disk disease was conducted between January 2012 and January 2016. All operations were performed by the same surgeon; the patients were divided into three groups according to the method of instrumentation. Group 1 involved the robot-assisted instrumentation in 58 patients, group 2 consisted of 64 patients treated with a percutaneous transpedicular instrumentation using fluoroscopic guidance, and 72 patients in group 3 received an open midline approach for pedicle screw insertion. Superior segment facet joint violation occurred in 2 patients in the robot-assisted group 1 (7%), in 22 of the percutaneous fluoroscopy-guided group 2 (34%), and in 6 cases of the open group (8%). The incidence of facet joint violation was present in 5% (3) of the screws in group 1, 22% (28) of the screws in group 2, and 3% (4) of the screws in group 3. Meticulous surgical planning of the appropriate entry site (Weinstein's method), trajectory planning, and proper robot-assisted instrumentation of pedicle screws reduced the risk of superior segment facet joint violation. Georg Thieme Verlag KG Stuttgart · New York.
Seiler, Gabriela S; Häni, Hansjürg; Busato, André R; Lang, Johann
2002-01-01
To evaluate the possible association between facet joint geometry and intervertebral disk degeneration in German Shepherd Dogs. 25 German Shepherd Dogs and 11 control dogs of similar body weight and condition. Facet joint angles in the caudal portion of the lumbar region of the vertebral column (L5-S1) were measured by use of computed tomography, and the intervertebral discs were evaluated microscopically. The relationship between facet joint geometry and disk degeneration was evaluated by use of statistical methods. German Shepherd Dogs had significantly more facet joint tropism than control dogs, but an association with disk degeneration was not found. However, German Shepherd Dogs had a different facet joint conformation, with more sagittally oriented facet joints at L5-L6 and L6-L7 and a larger angle difference between the lumbar and lumbosacral facet joints, compared with control dogs. A large difference between facet joint angles at L6-L7 and L7-S1 in German Shepherd Dogs may be associated with the frequent occurrence of lumbosacral disk degeneration in this breed.
Joint Center for Operational Analysis Quarterly Bulletin. Volume 8, Issue 3, September 2006
2006-09-01
Kuwait drove planning for Operation Desert Storm. The Dayton Peace Accord included an agreement by warring factions not to attack coalition forces as they...informants.29 Pinpointing the insurgent strongholds substantially helps the military shape its plan of attack. The government prepares the political...campaign plan . The use of informants, sting operations, and undercover internal affairs officers to name the most salient means, is effective in
1988-08-03
Air Transport Command Plans To Incorporate Reserve Pilots 21 NORWAY Former Defense Ministers Issue Warnings on Defense Cutting 23 Past Growth...other camp, because the 37 percent attained by the SPD in the last parliamentary election is not sufficient to create what we have planned jointly...he was planning or what made him do what he did. Is this the end of no-nonsense Lubbers? Why is the premier suddenly threatening the unity of his
Designing and Implementing a Jointly-Planned Unit: Expanding Thematic Units beyond the Textbook.
ERIC Educational Resources Information Center
Anderson, Laurel M.
A first-grade teacher included her students in her planning of a unit of study. The teacher explained to the students how she planned a unit and invited the students to volunteer ideas for the topic. The topic chosen was space and aliens. The teacher and students discussed what they already knew about the topic, what they wanted to learn about it,…
Guide to Rebuilding Governance in Stability Operations: A Role for the Military?
2009-06-01
departments to assess needs, develop a list of necessary parts and equipment, and prepare an action plan for restoration of services. With rapid...for drafting, reviewing, and voting on a new constitution was pursued. The Rwandan government’s action plan included: training and sensitization of...together to build collaborative relationships, share strategies for addressing obstacles, and develop joint action plans . Provide opportunities for CSOs to
Mutombo, Namuunda; Bakibinga, Pauline
2014-07-03
Zambia's fertility rate and unmet need for family planning are still high. This is in spite of the progress reported from 1992 to 2007 of the increase in contraceptive prevalence rate from 15% to 41% and use of modern methods of family planning from 9% to 33%. However, partner disapproval of family planning has been cited by many women in many countries including Zambia. Given the effectiveness of long-acting and permanent methods of family planning (ILAPMs) in fertility regulation, this paper sought to examine the relationship between contraceptive decision-making and use of ILAPMs among married women in Zambia. This paper uses data from the 2007 Zambia Demographic and Health Survey. The analysis is based on married women (15-49) who reported using a method of family planning at the time of the survey. Out of the 7,146 women interviewed, only 1,630 women were valid for this analysis. Cross-tabulations and binary logistic regressions with Chi-square were used to analyse associations and the predictors of use of ILAPMs of contraception, respectively. A confidence interval of .95 was used in determining relationships between independent and dependent variables. Two thirds of women made joint decisions regarding contraception and 29% of the women were using ILAPMs. Women who made joint contraceptive decisions are significantly more likely to use ILAPMs than women who did not involve their husband in contraceptive decisions. However, the most significant predictor is the wealth index. Women from rich households are more likely to use ILAPMs than women from medium rich and poor households. Results also show that women of North Western ethnicities and those from Region 3 had higher odds of using ILAPMs than Tonga women and women from Region 2, respectively. Joint contraceptive decision-making between spouses is key to use of ILAPMs in Zambia. Our findings have also shown that the wealth index is actually the strongest factor determining use of these methods. As such, family planning programmes directed at increasing use of LAPMs ought to not only encourage spousal communication but should also consider rolling out interventions that incorporate economic empowerment.
2014-01-01
Background Zambia’s fertility rate and unmet need for family planning are still high. This is in spite of the progress reported from 1992 to 2007 of the increase in contraceptive prevalence rate from 15% to 41% and use of modern methods of family planning from 9% to 33%. However, partner disapproval of family planning has been cited by many women in many countries including Zambia. Given the effectiveness of long-acting and permanent methods of family planning (ILAPMs) in fertility regulation, this paper sought to examine the relationship between contraceptive decision-making and use of ILAPMs among married women in Zambia. Methods This paper uses data from the 2007 Zambia Demographic and Health Survey. The analysis is based on married women (15–49) who reported using a method of family planning at the time of the survey. Out of the 7,146 women interviewed, only 1,630 women were valid for this analysis. Cross-tabulations and binary logistic regressions with Chi-square were used to analyse associations and the predictors of use of ILAPMs of contraception, respectively. A confidence interval of .95 was used in determining relationships between independent and dependent variables. Results Two thirds of women made joint decisions regarding contraception and 29% of the women were using ILAPMs. Women who made joint contraceptive decisions are significantly more likely to use ILAPMs than women who did not involve their husband in contraceptive decisions. However, the most significant predictor is the wealth index. Women from rich households are more likely to use ILAPMs than women from medium rich and poor households. Results also show that women of North Western ethnicities and those from Region 3 had higher odds of using ILAPMs than Tonga women and women from Region 2, respectively. Conclusion Joint contraceptive decision-making between spouses is key to use of ILAPMs in Zambia. Our findings have also shown that the wealth index is actually the strongest factor determining use of these methods. As such, family planning programmes directed at increasing use of LAPMs ought to not only encourage spousal communication but should also consider rolling out interventions that incorporate economic empowerment. PMID:24993034
Joint Force Quarterly. Number 5, Summer 1994
1994-07-01
terms of a matrix and have set it up to achieve things that matrix organizations facilitate. Matrices compel interaction across organizations; they...provide more joint, synergistic solutions to military problems. One primary result of this interaction between the assess- ment process and JROC is the...the Contingency Tactical Air Control Auto- mated Planning System (CTAPS) are both single-host computer sys- tems that do not support interactive data
Background for Joint Systems Aspects of AIR 6000
2000-04-01
Checkland’s Soft Systems Methodology [7, 8,9]. The analytical techniques that are proposed for joint systems work are based on calculating probability...Supporting Global Interests 21 DSTO-CR-0155 SLMP Structural Life Management Plan SOW Stand-Off Weapon SSM Soft Systems Methodology UAV Uninhabited Aerial... Systems Methodology in Action, John Wiley & Sons, Chichester, 1990. [101 Pearl, Judea, Probabilistic Reasoning in Intelligent Systems: Networks of Plausible
DOT National Transportation Integrated Search
1987-01-01
Senate Joint Resolution No. 7 (SJR-7) directs the Department to : develop a plan for reducing expenditures for administration and maintenance : by 5% as compared to FY 1987-88 appropriations and to continue : these reductions into the future. The pla...
Operation Urgent Fury - Grenada
1983-11-01
Urgent Fury : the planning and execution of joint operations in Grenada, 12 October-2 November 1983 / Ronald H. Cole. p . cm...meeting, Secretary of State George P . Shultz and the Chairman of the Joint Chiefs of Staff, General John W. Vessey, Jr., USA, warned the Special Situation...Group (RIG) of the National Security Council (NSC), on 12 October, Langhorne A. Motley, Assistant Secretary of State for Inter-American Affairs
High-Level Vision and Planning Workshop Proceedings
1989-08-01
Correspondence in Line Drawings of Multiple View-. In Proc. of 8th Intern. Joint Conf. on Artificial intellignece . 1983. [63] Tomiyasu, K. Tutorial...joint U.S.-Israeli workshop on artificial intelligence are provided in this Institute for Defense Analyses document. This document is based on a broad...participants is provided along with applicable references for individual papers. 14. SUBJECT TERMS 15. NUMBER OF PAGES Artificial Intelligence; Machine Vision
Space and Air Force: Rhetoric or Reality
1999-04-01
1997, (introduction). 11 Ibid., 18. 12 Ibid., 17. 13 Notes 13 Joint Operations Coursebook , “Joint Strategic Planning System: CJCS Instruction 3100.01...infrastructures as “the physical and information systems essential to the operations of the economy and government.”22 The NSS also specifies, “but...advances in information technology and competitive pressure to improve efficiency and productivity have created new vulnerabilities to both physical
Toro, Brigitte; Nester, Christopher J; Farren, Pauline C
2007-03-01
To evaluate the inter- and intraobserver repeatability of the Salford Gait Tool (SF-GT), a new observation-based gait assessment tool for evaluating sagittal plane cerebral palsy (CP) gait. Masked comparative evaluation. University in the United Kingdom. A convenience sample of 23 pediatric physical therapists with varying degrees of clinical experience recruited from the Greater Manchester area. Participants viewed videotapes of the sagittal plane gait of 13 children and used the SF-GT to analyze their 13 different gait styles on 2 occasions. Eleven children had hemiplegic, diplegic, or quadriplegic CP and 2 were neurologically intact. Inter- and intraobserver repeatability of hip, knee, and ankle joint positions at 6 different phases of the gait cycle. The SF-GT demonstrated good interobserver (77%) and intraobserver (75%) repeatability. We have established that the SF-GT is a repeatable clinical assessment tool with which to guide the diagnosis, treatment planning, and evaluation of interventions by pediatric physical therapists of sagittal plane gait deviations in CP.
Food Safety Crisis Management-A Comparison between Germany and the Netherlands.
van Asselt, E D; van der Fels-Klerx, H J; Breuer, O; Helsloot, I
2017-02-01
In order to prevent food safety incidents from becoming a crisis, a good crisis management structure is essential. The aim of the current study was to compare and evaluate the national food incident response plans of 2 neighboring EU Member States: Germany and the Netherlands. This revealed that the structure of these plans is comparable, starting with initial alerting, assessment of the problem, upscaling, an execution phase and finally an evaluation of the crisis management. However, the German communication structure is more complex than the Dutch one and cross-border communication between both countries is currently limited. In general, the presence of national response plans does not guarantee a good and swift response to a food safety incident as this is often hampered by difficulties in tracing the source of the problem as well as difficulties in communication between organizations involved in crisis management. A timely detection can be improved through the development of fast screening and detecting systems and through combining various data sources using computer software systems. Mutual cooperation and communication can be improved through joint exercises or projects. This will help to streamline communication toward consumers and trade partners. Such communication should be transparent relaying not only the facts but also the uncertainties in a crisis in order to gain consumer trust and safeguard international trade. © 2017 Institute of Food Technologists®.
Salimi-Badr, Armin; Ebadzadeh, Mohammad Mehdi; Darlot, Christian
2018-01-01
In this paper, a novel system-level mathematical model of the Basal Ganglia (BG) for kinematic planning, is proposed. An arm composed of several segments presents a geometric redundancy. Thus, selecting one trajectory among an infinite number of possible ones requires overcoming redundancy, according to some kinds of optimization. Solving this optimization is assumed to be the function of BG in planning. In the proposed model, first, a mathematical solution of kinematic planning is proposed for movements of a redundant arm in a plane, based on minimizing energy consumption. Next, the function of each part in the model is interpreted as a possible role of a nucleus of BG. Since the kinematic variables are considered as vectors, the proposed model is presented based on the vector calculus. This vector model predicts different neuronal populations in BG which is in accordance with some recent experimental studies. According to the proposed model, the function of the direct pathway is to calculate the necessary rotation of each joint, and the function of the indirect pathway is to control each joint rotation considering the movement of the other joints. In the proposed model, the local feedback loop between Subthalamic Nucleus and Globus Pallidus externus is interpreted as a local memory to store the previous amounts of movements of the other joints, which are utilized by the indirect pathway. In this model, activities of dopaminergic neurons would encode, at short-term, the error between the desired and actual positions of the end-effector. The short-term modulating effect of dopamine on Striatum is also modeled as cross product. The model is simulated to generate the commands of a redundant manipulator. The performance of the model is studied for different reaching movements between 8 points in a plane. Finally, some symptoms of Parkinson's disease such as bradykinesia and akinesia are simulated by modifying the model parameters, inspired by the dopamine depletion. Copyright © 2017 Elsevier Ltd. All rights reserved.
30 CFR 282.5 - Disclosure of data and information to the public.
Code of Federal Regulations, 2011 CFR
2011-07-01
... public. 282.5 Section 282.5 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, REGULATION, AND... unitization of operations on two or more leases, to ensure proper Mining Plans for a common orebody, or to... the affected lease(s), unitization agreement, or joint Mining Plan. (c) Geophysical data, processed...
Applying an AI Planner to Military Operations Planning
1993-01-12
This paper describes a prototype system for quickly developing joint military courses of action. The system, SOCAP (System for Operations Crisis...display and applies this technology to military operations planning. This paper describes the Socap problem domain, how SIPE-2 was used to address this problem, and the strengths and weaknesses of our approach.
Energy Conservation in the Home. Performance Based Lesson Plans.
ERIC Educational Resources Information Center
Alabama State Dept. of Education, Montgomery. Home Economics Service.
These ten performance-based lesson plans concentrate on tasks related to energy conservation in the home. They are (1) caulk cracks, holes, and joints; (2) apply weatherstripping to doors and windows; (3) add plastic/solar screen window covering; (4) arrange furniture for saving energy; (5) set heating/cooling thermostat; (6) replace faucet…
Federal Register 2010, 2011, 2012, 2013, 2014
2013-11-29
..., maintain, and decommission a solar photovoltaic (PV) power plant facility proposed on 4,179 acres with... and California Desert Conservation Area Plan Amendment for the Proposed Soda Mountain Solar Project... Desert Conservation Area (CDCA) Plan Amendment for the Soda Mountain Solar Project (Project), San...
2009-11-08
travel routes, holidays, festivals, sports, and other events; climate and weather; and water. Planning Planning must give appropriate weight...they can be manipulated rather easily, they are militarily significant. (1) Physical patterns such as market locations and travel routes may provide...cycle, cutting or controlling intercity and intracity mobility and communications, triggering an adversary response, or positioning forces to conduct
The GMES Sentinel-5 mission for operational atmospheric monitoring: status and developments
NASA Astrophysics Data System (ADS)
Sierk, Bernd; Bezy, Jean-Loup; Caron, Jerôme; Meynard, Roland; Veihelmann, Ben; Ingmann, Paul
2017-11-01
Sentinel-5 is an atmospheric monitoring mission planned in the frame of the joint EU/ESA initiative Global Monitoring for Environment and Security (GMES). The objective of the mission, planned to be launched in 2020, is the operational monitoring of trace gas concentrations for atmospheric chemistry and climate applications.
The Challenge of Measurement: Statistics for Planning Human Resource Development. Conference Paper
ERIC Educational Resources Information Center
Karmel, Tom
2011-01-01
This presentation was made to a breakout session at the 2011 Skills Australia and Industry Skills Councils joint conference, "Putting Skills at the Heart of Economy". The paper addresses the challenge of measurement in workforce development planning and discusses the role of the various players in the labour and training…
ERIC Educational Resources Information Center
Hauf, Harold D.; And Others
Colleges need appropriate large group instructional facilities for effective and efficient use of instructional aids and media. A well planned system of facilities must provide space for learning; production, origination, and support; storage and retrieval. Design begins with a building plan--a statement, made jointly by the administrator and…
Interlacing Mission, Strategic Planning, and Vision to Lean: Powerful DNA for Change
ERIC Educational Resources Information Center
Arnold, Alison; Flumerfelt, Shannon
2012-01-01
The authors' purpose for this article is to describe a K-12 public school district's journey to internalize and actualize its mission, strategic planning and vision as one coherent engagement using Lean principles and tools. Lean jointly comprises an organizational philosophy and management toolkit prominent in private, government, and nonprofit…
ERIC Educational Resources Information Center
Shibata, Paul
A product of joint effort between the Colorado Department of Institutions and the Division of Developmental Disabilities, the guide presents hierarchically arranged instructional objectives to determine goals for developmentally disabled persons. The most advanced skills are listed first with basic skills following for four major categories:…
Lesson Co-Planning: Joint Efforts, Shared Success
ERIC Educational Resources Information Center
Carreño, Laura; Hernandez Ortiz, Luz Stella
2017-01-01
The present article reports the results of a qualitative research study conducted at a higher education institution in Bogotá Colombia. The study aimed at examining the lesson planning practices conducted by English language teachers at the proficiency program of the institution. The participants were a mix of the mentors in charge of each level…
DOT National Transportation Integrated Search
1997-01-01
Congress recently requested the Intelligent Transportation Systems (ITS) Joint Program Office and the National Highway Traffic Safety Administration to update the 1992 ITS plan to deal with the fiscal year 1997 through fiscal year 2002 period, and...
A Vision of Change for America.
ERIC Educational Resources Information Center
Clinton, William J.
This report was prepared to accompany President Clinton's first address to a Joint Session of Congress. It describes in detail the comprehensive economic plan being proposed by the new administration for the nation. The plan has three key elements: economic stimulus to create jobs now while laying the foundation for long-term economic growth; long…
Kinematic path planning for space-based robotics
NASA Astrophysics Data System (ADS)
Seereeram, Sanjeev; Wen, John T.
1998-01-01
Future space robotics tasks require manipulators of significant dexterity, achievable through kinematic redundancy and modular reconfigurability, but with a corresponding complexity of motion planning. Existing research aims for full autonomy and completeness, at the expense of efficiency, generality or even user friendliness. Commercial simulators require user-taught joint paths-a significant burden for assembly tasks subject to collision avoidance, kinematic and dynamic constraints. Our research has developed a Kinematic Path Planning (KPP) algorithm which bridges the gap between research and industry to produce a powerful and useful product. KPP consists of three key components: path-space iterative search, probabilistic refinement, and an operator guidance interface. The KPP algorithm has been successfully applied to the SSRMS for PMA relocation and dual-arm truss assembly tasks. Other KPP capabilities include Cartesian path following, hybrid Cartesian endpoint/intermediate via-point planning, redundancy resolution and path optimization. KPP incorporates supervisory (operator) input at any detail to influence the solution, yielding desirable/predictable paths for multi-jointed arms, avoiding obstacles and obeying manipulator limits. This software will eventually form a marketable robotic planner suitable for commercialization in conjunction with existing robotic CAD/CAM packages.
Gyrd-Hansen, Dorte; Halvorsen, Peder; Nexøe, Jørgen; Nielsen, Jesper; Støvring, Henrik; Kristiansen, Ivar
2011-01-01
When people make choices, they may have multiple options presented simultaneously or, alternatively, have options presented 1 at a time. It has been shown that if decision makers have little experience with or difficulties in understanding certain attributes, these attributes will have greater impact in joint evaluations than in separate evaluations. The authors investigated the impact of separate versus joint evaluations in a health care context in which laypeople were presented with the possibility of participating in risk-reducing drug therapies. In a randomized study comprising 895 subjects aged 40 to 59 y in Odense, Denmark, subjects were randomized to receive information in terms of absolute risk reduction (ARR), relative risk reduction (RRR), number needed to treat (NNT), or prolongation of life (POL), all with respect to heart attack, and they were asked whether they would be willing to receive a specified treatment. Respondents were randomly allocated to valuing the interventions separately (either great effect or small effect) or jointly (small effect and large effect). Joint evaluation reduced the propensity to accept the intervention that offered the smallest effect. Respondents were more sensitive to scale when faced with a joint evaluation for information formats ARR, RRR, and POL but not for NNT. Evaluability bias appeared to be most pronounced for POL and ARR. Risk information appears to be prone to evaluability bias. This suggests that numeric information on health gains is difficult to evaluate in isolation. Consequently, such information may bear too little weight in separate evaluations of risk-reducing interventions.
Safety of audiology direct access for medicare patients complaining of impaired hearing.
Zapala, David A; Stamper, Greta C; Shelfer, Janet S; Walker, David A; Karatayli-Ozgursoy, Selmin; Ozgursoy, Ozan B; Hawkins, David B
2010-06-01
Allowing Medicare beneficiaries to self-refer to audiologists for evaluation of hearing loss has been advocated as a cost-effective service delivery model. Resistance to audiology direct access is based, in part, on the concern that audiologists might miss significant otologic conditions. To evaluate the relative safety of audiology direct access by comparing the treatment plans of audiologists and otolaryngologists in a large group of Medicare-eligible patients seeking hearing evaluation. Retrospective chart review study comparing assessment and treatment plans developed by audiologists and otolaryngologists. 1550 records comprising all Medicare eligible patients referred to the Audiology Section of the Mayo Clinic Florida in 2007 with a primary complaint of hearing impairment. Assessment and treatment plans were compiled from the electronic medical record and placed in a secured database. Records of patients seen jointly by audiology and otolaryngology practitioners (Group 1: 352 cases) were reviewed by four blinded reviewers, two otolaryngologists and two audiologists, who judged whether the audiologist treatment plan, if followed, would have missed conditions identified and addressed in the otolaryngologist's treatment plan. Records of patients seen by audiology but not otolaryngology (Group 2: 1198 cases) were evaluated by a neurotologist who judged whether the patient should have seen an otolaryngologist based on the audiologist's documentation and test results. Additionally, the audiologist and reviewing neurotologist judgments about hearing asymmetry were compared to two mathematical measures of hearing asymmetry (Charing Cross and AAO-HNS [American Academy of Otolaryngology-Head and Neck Surgery] calculations). In the analysis of Group 1 records, the jury of four judges found no audiology discrepant treatment plans in over 95% of cases. In no case where a judge identified a discrepancy in treatment plans did the audiologist plan risk missing conditions associated with significant mortality or morbidity that were subsequently identified by the otolaryngologist. In the analysis of Group 2 records, the neurotologist judged that audiology services alone were all that was required in 78% of cases. An additional 9% of cases were referred for subsequent medical evaluation. The majority of remaining patients had hearing asymmetries. Some were evaluated by otolaryngology for hearing asymmetry in the past with no interval changes, and others were consistent with noise exposure history. In 0.33% of cases, unexplained hearing asymmetry was potentially missed by the audiologist. Audiologists and the neurotologist demonstrated comparable accuracy in identifying Charing Cross and AAO-HNS pure-tone asymmetries. Of study patients evaluated for hearing problems in the one-year period of this study, the majority (95%) ultimately required audiological services, and in most of these cases, audiological services were the only hearing health-care services that were needed. Audiologist treatment plans did not differ substantially from otolaryngologist plans for the same condition; there was no convincing evidence that audiologists missed significant symptoms of otologic disease; and there was strong evidence that audiologists referred to otolaryngology when appropriate. These findings are consistent with the premise that audiology direct access would not pose a safety risk to Medicare beneficiaries complaining of hearing impairment. American Academy of Audiology.
Regional Anesthesia in Total Joint Arthroplasty: What Is the Evidence?
Elmofty, Dalia H; Buvanendran, Asokumar
2017-09-01
Total joint arthroplasty is one of the most common surgical procedures performed for end-stage osteoarthritis. The increasing demand for knee and hip arthroplasties along with the improvement in life expectancy has created a substantial medical and economic impact on the society. Effective planning of health care for these individuals is vital. The best method for providing anesthesia and analgesia for total joint arthroplasty has not been defined. Yet, emerging evidence suggests that the type of anesthesia can affect morbidity and mortality of patients undergoing these procedures. Copyright © 2017 Elsevier Inc. All rights reserved.
HMA Longitudinal Joint Evaluation and Construction
DOT National Transportation Integrated Search
2011-02-01
Longitudinal joint quality is essential to the successful performance of asphalt pavements. A number of states have begun to implement longitudinal joint specifications, and most are based on determinations of density. However, distress at the joint ...
NASA Astrophysics Data System (ADS)
Gao, Yi
The development and utilization of wind energy for satisfying electrical demand has received considerable attention in recent years due to its tremendous environmental, social and economic benefits, together with public support and government incentives. Electric power generation from wind energy behaves quite differently from that of conventional sources. The fundamentally different operating characteristics of wind energy facilities therefore affect power system reliability in a different manner than those of conventional systems. The reliability impact of such a highly variable energy source is an important aspect that must be assessed when the wind power penetration is significant. The focus of the research described in this thesis is on the utilization of state sampling Monte Carlo simulation in wind integrated bulk electric system reliability analysis and the application of these concepts in system planning and decision making. Load forecast uncertainty is an important factor in long range planning and system development. This thesis describes two approximate approaches developed to reduce the number of steps in a load duration curve which includes load forecast uncertainty, and to provide reasonably accurate generating and bulk system reliability index predictions. The developed approaches are illustrated by application to two composite test systems. A method of generating correlated random numbers with uniform distributions and a specified correlation coefficient in the state sampling method is proposed and used to conduct adequacy assessment in generating systems and in bulk electric systems containing correlated wind farms in this thesis. The studies described show that it is possible to use the state sampling Monte Carlo simulation technique to quantitatively assess the reliability implications associated with adding wind power to a composite generation and transmission system including the effects of multiple correlated wind sites. This is an important development as it permits correlated wind farms to be incorporated in large practical system studies without requiring excessive increases in computer solution time. The procedures described in this thesis for creating monthly and seasonal wind farm models should prove useful in situations where time period models are required to incorporate scheduled maintenance of generation and transmission facilities. There is growing interest in combining deterministic considerations with probabilistic assessment in order to evaluate the quantitative system risk and conduct bulk power system planning. A relatively new approach that incorporates deterministic and probabilistic considerations in a single risk assessment framework has been designated as the joint deterministic-probabilistic approach. The research work described in this thesis illustrates that the joint deterministic-probabilistic approach can be effectively used to integrate wind power in bulk electric system planning. The studies described in this thesis show that the application of the joint deterministic-probabilistic method provides more stringent results for a system with wind power than the traditional deterministic N-1 method because the joint deterministic-probabilistic technique is driven by the deterministic N-1 criterion with an added probabilistic perspective which recognizes the power output characteristics of a wind turbine generator.
Adapting The Joint Commission's Seven Foundations of Safe and Effective Transitions of Care to Home
Labson, Margherita C.
2015-01-01
The purpose of this article is to describe The Joint Commission's 7 foundations of safe and effective transitions of care to home: (a) leadership support; (b) multidisciplinary collaboration; (c) early identification of patients/clients at risk; (d) transitional planning; (e) medication management; (f) patient and family action/engagement; and (g) transfer of information. These foundations were identified by The Joint Commission after a review of published research; focus groups with healthcare professionals involved in transitions of care; and visits to diverse healthcare organizations. The author, who is the executive director of The Joint Commission's Home Care Accreditation Program, illustrates how healthcare organizations are adapting the 7 foundations of safe and effective transitions of care to home. PMID:25742092
Evaluation of Brazed Joints Using Failure Assessment Diagram
NASA Technical Reports Server (NTRS)
Flom, Yury
2012-01-01
Fitness-for service approach was used to perform structural analysis of the brazed joints consisting of several base metal / filler metal combinations. Failure Assessment Diagrams (FADs) based on tensile and shear stress ratios were constructed and experimentally validated. It was shown that such FADs can provide a conservative estimate of safe combinations of stresses in the brazed joints. Based on this approach, Margins of Safety (MS) of the brazed joints subjected to multi-axial loading conditions can be evaluated..
Doherty, Kevin E.; Evans, Jeffrey S.; Walker, Johann; Devries, James H.; Howerter, David W.
2015-01-01
We used publically available data on duck breeding distribution and recently compiled geospatial data on upland habitat and environmental conditions to develop a spatially explicit model of breeding duck populations across the entire Prairie Pothole Region (PPR). Our spatial population models were able to identify key areas for duck conservation across the PPR and predict between 62.1 – 79.1% (68.4% avg.) of the variation in duck counts by year from 2002 – 2010. The median difference in observed vs. predicted duck counts at a transect segment level was 4.6 ducks. Our models are the first seamless spatially explicit models of waterfowl abundance across the entire PPR and represent an initial step toward joint conservation planning between Prairie Pothole and Prairie Habitat Joint Ventures. Our work demonstrates that when spatial and temporal variation for highly mobile birds is incorporated into conservation planning it will likely increase the habitat area required to support defined population goals. A major goal of the current North American Waterfowl Management Plan and subsequent action plan is the linking of harvest and habitat management. We contend incorporation of spatial aspects will increase the likelihood of coherent joint harvest and habitat management decisions. Our results show at a minimum, it is possible to produce spatially explicit waterfowl abundance models that when summed across survey strata will produce similar strata level population estimates as the design-based Waterfowl Breeding Pair and Habitat Survey (r2 = 0.977). This is important because these design-based population estimates are currently used to set duck harvest regulations and to set duck population and habitat goals for the North American Waterfowl Management Plan. We hope this effort generates discussion on the important linkages between spatial and temporal variation in population size, and distribution relative to habitat quantity and quality when linking habitat and population goals across this important region. PMID:25714747
NATO Needs a Comprehensive Strategy for Russia
2015-01-01
stated their intent to continue on this path in the 2014 Wales Summit Declaration, when they announced a Readiness Action Plan that will create a...expansion of other military activities, such as joint planning , information exchanges, discus- sions among senior leaders, and ship visits. Second...end of the Cold War. For example, the Army stationed about 213,000 soldiers on 41 garrisons in Europe in 1989 but plans to have only about 30,000
Effect of Shielding Gas on the Properties of AW 5083 Aluminum Alloy Laser Weld Joints
NASA Astrophysics Data System (ADS)
Vyskoč, Maroš; Sahul, Miroslav; Sahul, Martin
2018-04-01
The paper deals with the evaluation of the shielding gas influence on the properties of AW 5083 aluminum alloy weld joints produced with disk laser. Butt weld joints were produced under different shielding gas types, namely Ar, He, Ar + 5 vol.% He, Ar + 30 vol.% He and without shielding weld pool. Light and electron microscopy, computed tomography, microhardness measurements and tensile testing were used for evaluation of weld joint properties. He-shielded weld joints were the narrowest ones. On the other hand, Ar-shielded weld joints exhibited largest weld width. The choice of shielding gas had significant influence on the porosity level of welds. The lowest porosity was observed in weld joint produced in Ar with the addition of 5 vol.% He shielding atmosphere (only 0.03%), while the highest level of porosity was detected in weld joint produced in pure He (0.24%). Except unshielded aluminum alloy weld joint, the lowest tensile strength was recorded in He-shielded weld joints. On the contrary, the highest average microhardness was measured in He-shielded weld joints.
[The GIPSY-RECPAM model: a versatile approach for integrated evaluation in cardiologic care].
Carinci, F
2009-01-01
Tree-structured methodology applied for the GISSI-PSICOLOGIA project, although performed in the framework of earliest GISSI studies, represents a powerful tool to analyze different aspects of cardiologic care. The GISSI-PSICOLOGIA project has delivered a novel methodology based on the joint application of psychometric tools and sophisticated statistical techniques. Its prospective use could allow building effective epidemiological models relevant to the prognosis of the cardiologic patient. The various features of the RECPAM method allow a versatile use in the framework of modern e-health projects. The study used the Cognitive Behavioral Assessment H Form (CBA-H) psychometrics scales. The potential for its future application in the framework of Italian cardiology is relevant and particularly indicated to assist planning of systems for integrated care and routine evaluation of the cardiologic patient.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1981-04-01
The AGRI GRAIN POWER (AGP) Project, hereafter referred to as the Project, was formed to evaluate the commercial viability and assess the desireability of implementing a large grain based grass-roots anhydrous ethanol fuel project to be sited near Des Moines, Iowa. This report presents the results of a Project feasibility evaluation. The Project concept is based on involving a very strong managerial, financial and technical joint venture that is extremely expert in all facets of planning and implementing a large ethanol project; on locating the ethanol project at a highly desireable site; on utilizing a proven ethanol process; and onmore » developing a Project that is well suited to market requirements, resource availability and competitive factors. The Project conceptual design is presented in this volume.« less
Biomechanical Evaluation of a Prototype Foot/Ankle Prosthesis
Quesada, P. M.; Pitkin, M.; Colvin, J.
2016-01-01
In this paper, we report on our pilot evaluation of a prototype foot/ankle prosthesis. This prototype has been designed and fabricated with the intention of providing decreased ankle joint stiffness during the middle portion of the stance phase of gait, and increased (i.e., more normal) knee range of motion during stance. Our evaluation involved fitting the existing prototype foot/ankle prosthesis, as well as a traditional solid ankle cushioned heel (SACH) foot, to an otherwise healthy volunteer with a below-knee (BK) amputation. We measured this individual’s lower extremity joint kinematics and kinetics during walking using a video motion analysis system and force platform. These measurements permitted direct comparison of prosthetic ankle joint stiffness and involved side knee joint motion, as well as prosthetic ankle joint moment and power. PMID:10779119
Sylvain, Chantal; Durand, Marie-José; Velasquez Sanchez, Astrid; Lessard, Nathalie; Maillette, Pascale
2018-05-23
Purpose Long-term work disability due to common mental disorders (CMDs) is a growing problem. Yet optimal interventions remain unclear and little is known about implementation challenges in everyday practice. This study aimed to support and evaluate, in real time, the development and implementation of a work rehabilitation program (WRP) designed to promote post-CMD return-to-work (RTW). Methods A 2-year developmental evaluation was performed using a participatory approach. At program outset, the researchers held five work meetings to revise the program's logic model and discuss its underlying change theory with clinicians. Data collection tools used throughout the study period were structured charts of activities conducted with workers (n = 41); in-depth interviews with program clinicians and managers (n = 9); and participant observation during work meetings. Quantitative data were analyzed using descriptive statistics. Qualitative data underwent thematic analysis using a processual approach. Results Three types of activity were developed and implemented: individual and group interventions targeting workers, and joint activities targeting partners (physicians, employers, others). While worker-targeted activities were generally implemented as planned, joint activities were sporadic. Analysis of the implementation process revealed five challenges faced by clinicians. Determinants included clinicians, host organization, sociopolitical context and resources provided by the evaluation. Conclusion The program studied is original in that it is based on the best available scientific knowledge, yet adapted to contextual particularities. The identified implementation challenges highlight the need for greater importance to be placed on the external, non-program context to ensure sustainable implementation in everyday practice.
Chrysler Upset Protrusion Joining Techniques for Joining Dissimilar Metals
DOE Office of Scientific and Technical Information (OSTI.GOV)
Logan, Stephen
The project goal was to develop and demonstrate a robust, cost effective, and versatile joining technique, known as Upset Protrusion Joining (UPJ), for joining challenging dissimilar metal com-binations, especially those where one of the metals is a die cast magnesium (Mg) component. Since two of the key obstacles preventing more widespread use of light metals (especially in high volume automotive applications) are 1) a lack of robust joining techniques and 2) susceptibility to galvanic corrosion, and since the majority of the joint combinations evaluated in this project include die cast Mg (the lightest structural metal) as one of the twomore » materials being joined, and since die casting is the most common and cost effective process for producing Mg components, then successful project completion provides a key enabler to high volume application of lightweight materials, thus potentially leading to reduced costs, and encouraging implementation of lightweight multi-material vehicles for significant reductions in energy consumption and reduced greenhouse gas emissions. Eco-nomic benefits to end-use consumers are achieved primarily via the reduction in fuel consumption. Unlike currently available commercial processes, the UPJ process relies on a very robust mechanical joint rather than intermetallic bonding, so the more cathodic material can be coated prior to joining, thus creating a robust isolation against galvanic attack on the more anodic material. Additionally, since the UPJ protrusion is going through a hole that can be pre-drilled or pre-punched prior to coating, the UPJ process is less likely to damage the coating when the joint is being made. Further-more, since there is no additional cathodic material (such as a steel fastener) used to create the joint, there is no joining induced galvanic activity beyond that of the two parent materials. In accordance with its originally proposed plan, this project has successfully developed process variants of UPJ to enable joining of Mg die castings to aluminum (Al) and steel sheet components of various thicknesses, strengths and coating configurations. While most development focused on the simpler round boss version of the process, an additional phase of the work focused on devel-opment of an oval boss version to support applications with narrow flanges, while yet another vari-ant of the process, known as Upset Cast Riveting (UCR), was developed and evaluated for joining mixed metals that may not necessarily include Mg or Al die cast components. Although each varia-tion posed unique challenges described later in the report, all variations were successfully produced and evaluated, and each could be further developed for specific types of commercial applications. In this project, UPJ performed favorably against the benchmark self-pierce riveting (SPR) process in Mg AM60B to Al 6013 combinations although significant corrosion challenges were observed in both processes, especially for the bare Mg to bare Al configurations. Additional challenges were observed in joining Mg to steel with the UPJ process (SPR was not evaluated for this combination as it was not considered viable). To pass FCA’s specified corrosion tests with Mg/steel combina-tions, new steel treatments were evaluated, as well as adhesives and sealed edges. These showed significant improvement. In general, UPJ performed very well in Mg to Al 6016 combinations, even in corrosion evaluation of the bare Mg to bare Al configuration (again, SPR was not evaluated for this material combination as the 1.1 mm thick Al6016 sheet thickness was considered too thin for the SPR process). The improvement in corrosion performance of the Mg to Al 6016 combina-tion over the Mg to Al 6013 combination was thought to be a result of the lower copper content in the Al 6016 alloy. Oval boss joints showed substantial improvement in all joint strength criteria compared to 8.0-mm diameter round boss joints but were not evaluated for corrosion performance. The improved joint strength is likely a result of larger shear area. Cosmetic corrosion performance of all test assemblies (UPJ, UCR and SPR) was a challenge due to exposed edges and crevices al-lowing undercutting of the coatings. In real world component applications, the exposed edges, so prevalent on the joining test coupons, would be less prevalent and easier to protect.« less
Evaluation of pipe-type cable joint restraint systems
DOE Office of Scientific and Technical Information (OSTI.GOV)
Silver, D.A.; Seman, G.W.
1990-03-01
the purpose of this project was to evaluate two systems for restraining the movement of 345kV high-pressure oil-filled (HPOF) cable joints during load cycling. Problems with joints and adjacent cables due to thermomechanical bending (TMB) experienced by the Consolidated Edison Company of New York and Public Service Electric Gas Company of New Jersey are reviewed. Some approaches to reducing or preventing TMB induced damage to HPOF pipe type cable joints are discussed. The design and operation of a special test apparatus for simulating TMB effects under laboratory conditions is described. One of the two joint restraint systems evaluated under thismore » project was developed by PSE G and employed wedging devices, which could be retrofitted into existing installations, that limited the longitudinal movement of the joints during load cycling. The other system developed by Pirelli Cable Corporation applied the restraining force to the cylindrical portion of the hand applied joint insulation by means of support spiders and steel rods attached to the reducer faces. The test results show that the PSE G restraint system can effectively limit joint longitudinal movement while causing a minimal amount of mechanical disturbance to the joint stress cones. The test results obtained with the PCC system are inconclusive and indicate that further refinement and testing are required to demonstrate the effectiveness of this promising joint restraint system.« less
National Space Transportation and Support Study/technology requirements and plans
NASA Technical Reports Server (NTRS)
Walberg, G. D.; Gasperich, F. J., Jr.; Scheyhing, E. R.
1986-01-01
This paper presents a generic technology plan which has been developed as part of the National Space Transportation and Support Study. This program, which addresses a wide variety of potentially high payoff technology areas, is structured to promote both enhanced vehicle performance and greatly improved operational efficiency and includes both evolutionary and breakthrough technologies. The plan is presented in terms of disciplinary plan elements, which were developed by joint NASA/USAF disciplinary working groups, and as a set of demonstration projects which serve as focal points for the overall plan and drive the development of the many interrelated disciplinary activities.
Scarton, Alessandra; Jonkers, Ilse; Guiotto, Annamaria; Spolaor, Fabiola; Guarneri, Gabriella; Avogaro, Angelo; Cobelli, Claudio; Sawacha, Zimi
2017-10-01
Diabetes neuropathy and vasculopathy are the two major complications of diabetes mellitus, leading to diabetic foot disease, of which the worst consequences are plantar ulcers and amputations. Motor impairments like joint stiffness and loss of balance are distinctive effects of diabetes and they have been extensively explored. However, while altered muscle function has been also assessed through experimentally measured surface electromyography, little is known about muscle forces. The objective of this study was to estimate muscle forces in subjects with diabetes and to use these data to identify differences with respect to a population of healthy subjects matched for age and BMI. This was obtained by generating musculoskeletal models of 10 diabetic and 10 control subjects in OpenSim starting from experimentally recorded data. Dynamic simulations of motion were run and hence muscle forces calculated. Student T test (p<0.05) was used to compare joints kinematics, kinetics and muscle forces between the two populations. Significant changes were observed between lower limb muscle forces and activation of diabetic and healthy subjects, as well as between joints kinematics and kinetics. In particular muscles related to foot movements proved to be stronger in the healthy population. The typical ankle rigidity of the diabetic population was confirmed by a lower range of motion registered at the ankle plantar/flexion angle associated with weaker dorsal-plantar flexor muscles. The information provided by this methodology can help planning specific training programs aiming at augmenting muscle strength and joints mobility, and they can also improve the evaluation of the potential benefits. Copyright © 2017 Elsevier B.V. All rights reserved.
Kepler Mission IYA Teacher Professional Development Workshops
NASA Astrophysics Data System (ADS)
Devore, E. K.; Harman, P.; Gould, A. D.; Koch, D.
2009-12-01
NASA's Kepler Mission conducted six teacher professional development workshops on the search for Earth-size in the habitable zone of Sun-like stars. The Kepler Mission launched in March, 2009. As a part of International Year of Astronomy 2009, this series of one-day workshops were designed and presented for middle and high school teachers, and science center and planetarium educators prior to and after the launch. The professional development workshops were designed using the best practices and principals from the National Science Education Standards and similar documents. Sharing the outcome of our plans, strategies and formative evaluation results can be of use to other Education and Public Outreach practitioners who plan similar trainings. Each event was supported by a Kepler team scientist, two Education & Public Outreach staff and local hosts. The workshops combined a science content lecture and discussion, making models, kinesthetic activities, and interpretation of transit data. The emphasis was on inquiry-based instruction and supported science education standards in grades 7-12. Participants’ kit included an orrery, optical sensor and software to demonstrate transit detection. The workshop plan, teaching strategies, and lessons learned from evaluation will be discussed. Future events are planned. Kepler's Education and Public Outreach program is jointly conducted by the SETI Institute and Lawrence Hall of Science at UC Berkeley in close coordination with the Kepler Mission at NASA Ames Research Center. The IYA Kepler Teacher Professional Development workshops were supported by NASA Grants to the E. DeVore, SETI Institute NAG2-6066 Kepler Education and Public Outreach and NNX08BA74G, IYA Kepler Mission Pre-launch Workshops. Teachers participate in human orrery.
Evaluating Intra-Articular Drug Delivery for the Treatment of Osteoarthritis in a Rat Model
Allen, Kyle D.; Adams, Samuel B.
2010-01-01
Osteoarthritis (OA) is a degenerative joint disease that can result in joint pain, loss of joint function, and deleterious effects on activity levels and lifestyle habits. Current therapies for OA are largely aimed at symptomatic relief and may have limited effects on the underlying cascade of joint degradation. Local drug delivery strategies may provide for the development of more successful OA treatment outcomes that have potential to reduce local joint inflammation, reduce joint destruction, offer pain relief, and restore patient activity levels and joint function. As increasing interest turns toward intra-articular drug delivery routes, parallel interest has emerged in evaluating drug biodistribution, safety, and efficacy in preclinical models. Rodent models provide major advantages for the development of drug delivery strategies, chiefly because of lower cost, successful replication of human OA-like characteristics, rapid disease development, and small joint volumes that enable use of lower total drug amounts during protocol development. These models, however, also offer the potential to investigate the therapeutic effects of local drug therapy on animal behavior, including pain sensitivity thresholds and locomotion characteristics. Herein, we describe a translational paradigm for the evaluation of an intra-articular drug delivery strategy in a rat OA model. This model, a rat interleukin-1β overexpression model, offers the ability to evaluate anti-interleukin-1 therapeutics for drug biodistribution, activity, and safety as well as the therapeutic relief of disease symptoms. Once the action against interleukin-1 is confirmed in vivo, the newly developed anti-inflammatory drug can be evaluated for evidence of disease-modifying effects in more complex preclinical models. PMID:19943805
Kobayashi, Toshiki; Leung, Aaron K L; Akazawa, Yasushi; Hutchins, Stephen W
2011-01-01
To investigate the methodology using a manual ankle joint resistive torque measurement device to evaluate the contribution of the neural component of ankle joint resistive torque in patients with stroke. Within-subject comparison to compare the ankle joint resistive torque between fast and slow stretching conditions. Ten patients with stroke participated in this study. The incremental ratio of ankle joint resistive torque at the ankle angular position of 5degrees dorsiflexion under the fast stretching condition in comparison to the slow one was calculated in each patient. A significant increase (p<0.01) in the ankle joint resistive torque was demonstrated under the fast stretching condition in comparison to the slow one in all patients and the mean ankle joint resistive torque was 4.6 (SD=1.7) Nm under the slow stretching condition, while it was 8.4 (SD=4.1) Nm under the fast stretching condition at the ankle angular position of 5 degrees dorsiflexion. The incremental ratio ranged from 9.4-139.3% among the patients. The results of this study demonstrated the potential advantage of the device to evaluate the contribution of the neural component of ankle joint resistive torque.
A Quantitative Exposure Planning Tool for Surgical Approaches to the Sacroiliac Joint.
Phelps, Kevin D; Ming, Bryan W; Fox, Wade E; Bellamy, Nelly; Sims, Stephen H; Karunakar, Madhav A; Hsu, Joseph R
2016-06-01
To aid in surgical planning by quantifying and comparing the osseous exposure between the anterior and posterior approaches to the sacroiliac joint. Anterior and posterior approaches were performed on 12 sacroiliac joints in 6 fresh-frozen torsos. Visual and palpable access to relevant surgical landmarks was recorded. Calibrated digital photographs were taken of each approach and analyzed using Image J. The average surface areas of exposed bone were 44 and 33 cm for the anterior and posterior approaches, respectively. The anterior iliolumbar ligament footprint could be visualized in all anterior approaches, whereas the posterior aspect could be visualized in all but one posterior approach. The anterior approach provided visual and palpable access to the anterior superior edge of the sacroiliac joint in all specimens, the posterior superior edge in 75% of specimens, and the inferior margin in 25% and 50% of specimens, respectively. The inferior sacroiliac joint was easily visualized and palpated in all posterior approaches, although access to the anterior and posterior superior edges was more limited. The anterior S1 neuroforamen was not visualized with either approach and was more consistently palpated when going posterior (33% vs. 92%). Both anterior and posterior approaches can be used for open reduction of pure sacroiliac dislocations, each with specific areas for assessing reduction. In light of current plate dimensions, fractures more than 2.5 cm lateral to the anterior iliolumbar ligament footprint are amenable to anterior plate fixation, whereas those more medial may be better addressed through a posterior approach.
FY 1986 current fiscal year work plan
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
This Current Year Work Plan presents in detail a description of the activities to be performed by the Joint Integration Office/RI during FY86. It breaks down the activities into two major work areas: Program Management and Program Analysis. Program Management is performed by the JIO/RI by providing technical planning and guidance for the development of advanced TRU waste management capabilities. This includes equipment/facility design, engineering, construction, and operations. These functions are integrated to allow transition from interim storage to final disposition. JIO/RI tasks include program requirements identification, long-range technical planning, budget development, program planning document preparation, task guidance development, taskmore » monitoring, task progress information gathering and reporting to DOE, interfacing with other agencies and DOE lead programs, integrating public involvement with program efforts, and preparation of reports for DOE detailing program status. Program Analysis is performed by the JIO/RI to support identification and assessment of alternatives, and development of long-term TRU waste program capabilities. These analyses include short term analyses in response to DOE information requests, along with performing an RH Cost/Schedule Optimization report. System models will be developed, updated, and upgraded as needed to enhance JIO/RI's capability to evaluate the adequacy of program efforts in various fields. A TRU program data base will be maintained and updated to provide DOE with timely responses to inventory related questions.« less
Beyond fighting fires and chasing tails? Chronic illness care plans in Ontario, Canada.
Russell, Grant; Thille, Patricia; Hogg, William; Lemelin, Jacques
2008-01-01
Recent work has conceptualized new models for the primary care management of patients with chronic illness. This study investigated the experience of family physicians and patients with a chronic illness management initiative that involved the joint formulation of comprehensive individual patient care plans. A qualitative evaluation, framed by phenomenology, immediately followed a randomized controlled trial examining the effect of external facilitators in enhancing the delivery of chronic condition care planning in primary care. The study, set in Ontario family practices, used semistructured in-depth interviews with a purposive sample of 13 family physicians, 20 patients, and all 3 study facilitators. Analysis used independent transcript review and constant comparative methods. Despite the intervention being grounded in patient-centered principles, family physicians generally viewed chronic illness management from a predominantly biomedical perspective. Only a few enthusiasts viewed systematic care planning as a new approach to managing patients with chronic illness. Most family physicians found the strategy to be difficult to implement within existing organizational and financial constraints. For these participants, care planning conflicted with preexisting concepts of their role and of their patient's abilities to become partners in care. The few patients who noticed the process spoke favorably about their experience. Although the experiences of the enthusiastic family physicians were encouraging, we found important individual-level barriers to chronic illness management in primary care. These issues seemed to transcend existing organizational and resource constraints.
Miller, Margaret; Pollard, Christina
2005-04-01
In 1990, the Department of Health in Western Australia (DOH) initiated a five-year campaign to increase awareness of the need to eat more fruit and vegetables and to encourage increased consumption. This paper describes aspects of the campaign and reviews the strengths and weaknesses of health and fruit and vegetable industry alliances to extend and sustain the campaign. The fruit and vegetable industry was engaged through information sharing, consultation, working groups and joint promotions. The partnership was examined in terms of six inter-sectoral action dimensions (necessity; opportunity and capacity to work together; established relationships for goal achievement; degree of planning; potential for evaluation; and sustainability of action). There were both need and opportunity for each sector to work together. Health had commitment, expertise and resources to plan, implement and evaluate the campaign. Industry had established channels of communication within the supply chain. Sustained health sector presence provided incentive, endorsement and policy direction. Resources and infrastructure limited partnership sustainability. Greatest potential for success occurred when participants' contributions were closely aligned to their core business and there was a body responsible for co-ordinating action.
Raghunath, Rajat; Varghese, Gigi; Simon, Betty
2014-01-01
We report a case of chronic arthritis of the right hip joint in an otherwise healthy young male athlete as a complication of inadequately treated anal fistula. A young male athlete presented with symptoms of right hip pain and difficulty in walking and intermittent fever for 2 months. He had a history of perianal abscess drainage. On examination he was found to have a tender right hip joint with severe restriction of movements. He was also found to have a partially drained right ischiorectal abscess. X-ray and MRI of the hip joint revealed chronic arthritis of the right hip joint, which was communicating with a complex fistula-in-ano. He underwent a diversion sigmoid colostomy and right ischiorectal abscess drainage along with appropriate antibiotics with a plan for definitive hip joint procedure later. He was lost to follow-up and succumbed to severe perianal sepsis within a few months. PMID:25414226
Reexamining Joint Chiefs of Staff Involvement in the Bay of Pigs
2015-05-21
judged the guerilla plan to be unsound and had recommended improvements. Short of further assurances, the JCS had no way to confirm that the CIA had...Approved for public release; distribution is unlimited Reexamining Joint Chiefs of Staff Involvement in the Bay of Pigs A Monograph by LTC...average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data
ERIC Educational Resources Information Center
General Accounting Office, Washington, DC.
In response to the need of military leaders to be better prepared to plan, support, and conduct joint (multi-service and multi-national) operations, Congress enacted the Goldwater- Nichols Department of Defense Reorganization Act of 1986. Positive steps were taken to implement provisions in the Act that address the education, assignment, and…
Defense Acquisition: Overview, Issues, and Options for Congress
2007-06-20
Joint Staff; the Unified Combatant Commands ( UCCs ); the Defense Agencies; and DOD field activities. planning stage results in the production of the Joint...through the use of such procurement actions. Supporters could also argue that this requirement will help ensure that thorough market research is...high prices for shoddy weapons. Yet they sought, on the other, that the industrialists in their own states and districts got their fair share , or more