Thermal Protection System with Staggered Joints

NASA Technical Reports Server (NTRS)

Simon, Xavier D. (Inventor); Robinson, Michael J. (Inventor); Andrews, Thomas L. (Inventor)

2014-01-01

The thermal protection system disclosed herein is suitable for use with a spacecraft such as a reentry module or vehicle, where the spacecraft has a convex surface to be protected. An embodiment of the thermal protection system includes a plurality of heat resistant panels, each having an outer surface configured for exposure to atmosphere, an inner surface opposite the outer surface and configured for attachment to the convex surface of the spacecraft, and a joint edge defined between the outer surface and the inner surface. The joint edges of adjacent ones of the heat resistant panels are configured to mate with each other to form staggered joints that run between the peak of the convex surface and the base section of the convex surface.

QM-8 field joint protection system, volume 7

NASA Technical Reports Server (NTRS)

Hale, Elgie

1989-01-01

The pre-launch functioning data of the Field Joint Protection System (JPS) used on QM-8 are presented. Also included is the post fire condition of the JPS components following the test firing of the motor. The JPS components are: field joint heaters; field joint sensors; field joint moisture seal; moisture seal kevlar retaining straps; field joint external extruded cork insulation; vent valve; power cables; and igniter heater.

Modeling joint restoration strategies for interdependent infrastructure systems

PubMed Central

Simonovic, Slobodan P.

2018-01-01

Life in the modern world depends on multiple critical services provided by infrastructure systems which are interdependent at multiple levels. To effectively respond to infrastructure failures, this paper proposes a model for developing optimal joint restoration strategy for interdependent infrastructure systems following a disruptive event. First, models for (i) describing structure of interdependent infrastructure system and (ii) their interaction process, are presented. Both models are considering the failure types, infrastructure operating rules and interdependencies among systems. Second, an optimization model for determining an optimal joint restoration strategy at infrastructure component level by minimizing the economic loss from the infrastructure failures, is proposed. The utility of the model is illustrated using a case study of electric-water systems. Results show that a small number of failed infrastructure components can trigger high level failures in interdependent systems; the optimal joint restoration strategy varies with failure occurrence time. The proposed models can help decision makers to understand the mechanisms of infrastructure interactions and search for optimal joint restoration strategy, which can significantly enhance safety of infrastructure systems. PMID:29649300

Modeling joint restoration strategies for interdependent infrastructure systems.

PubMed

Zhang, Chao; Kong, Jingjing; Simonovic, Slobodan P

2018-01-01

Life in the modern world depends on multiple critical services provided by infrastructure systems which are interdependent at multiple levels. To effectively respond to infrastructure failures, this paper proposes a model for developing optimal joint restoration strategy for interdependent infrastructure systems following a disruptive event. First, models for (i) describing structure of interdependent infrastructure system and (ii) their interaction process, are presented. Both models are considering the failure types, infrastructure operating rules and interdependencies among systems. Second, an optimization model for determining an optimal joint restoration strategy at infrastructure component level by minimizing the economic loss from the infrastructure failures, is proposed. The utility of the model is illustrated using a case study of electric-water systems. Results show that a small number of failed infrastructure components can trigger high level failures in interdependent systems; the optimal joint restoration strategy varies with failure occurrence time. The proposed models can help decision makers to understand the mechanisms of infrastructure interactions and search for optimal joint restoration strategy, which can significantly enhance safety of infrastructure systems.

Mechanical end joint system for structural column elements

NASA Technical Reports Server (NTRS)

Bush, H. G.; Wallsom, R. E. (Inventor)

1982-01-01

A mechanical end joint system, useful for the transverse connection of strut elements to a common node, comprises a node joint half with a semicircular tongue and groove, and a strut joint half with a semicircular tongue and groove. The two joint halves are engaged transversely and the connection is made secure by the inherent physical property characteristics of locking latches and/or by a spring-actioned shaft. A quick release mechanism provides rapid disengagement of the joint halves.

Evaluation of longitudinal joint tie bar system.

DOT National Transportation Integrated Search

2011-09-01

"An adequate longitudinal joint tie bar system is essential in the overall performance of concrete pavement. Excessive : longitudinal joint openings are believed to be caused by either inadequate tie bar size or spacing or improper tie bar : installa...

Elevated sacroilac joint uptake ratios in systemic lupus erythematosus

DOE Office of Scientific and Technical Information (OSTI.GOV)

De Smet, A.A.; Mahmood, T.; Robinson, R.G.

1984-08-01

Sacroiliac joint radiographs and radionuclide sacroiliac joint uptake ratios were obtained on 14 patients with active systemic lupus erythematosus. Elevated joint ratios were found unilaterally in two patients and bilaterally in seven patients when their lupus was active. In patients whose disease became quiescent, the uptake ratios returned to normal. Two patients had persistently elevated ratios with continued clinical and laboratory evidence of active lupus. Mild sacroiliac joint sclerosis and erosions were detected on pelvic radiographs in these same two patients. Elevated quantitative sacroiliac joint uptake ratios may occur as a manifestation of active systemic lupus erythematosus.

Dynamic analysis of clamp band joint system subjected to axial vibration

NASA Astrophysics Data System (ADS)

Qin, Z. Y.; Yan, S. Z.; Chu, F. L.

2010-10-01

Clamp band joints are commonly used for connecting circular components together in industry. Some of the systems jointed by clamp band are subjected to dynamic load. However, very little research on the dynamic characteristics for this kind of joint can be found in the literature. In this paper, a dynamic model for clamp band joint system is developed. Contact and frictional slip between the components are accommodated in this model. Nonlinear finite element analysis is conducted to identify the model parameters. Then static experiments are carried out on a scaled model of the clamp band joint to validate the joint model. Finally, the model is adopted to study the dynamic characteristics of the clamp band joint system subjected to axial harmonic excitation and the effects of the wedge angle of the clamp band joint and the preload on the response. The model proposed in this paper can represent the nonlinearity of the clamp band joint and be used conveniently to investigate the effects of the structural and loading parameters on the dynamic characteristics of this type of joint system.

Integrated High-Speed Torque Control System for a Robotic Joint

NASA Technical Reports Server (NTRS)

Davis, Donald R. (Inventor); Radford, Nicolaus A. (Inventor); Permenter, Frank Noble (Inventor); Valvo, Michael C. (Inventor); Askew, R. Scott (Inventor)

2013-01-01

A control system for achieving high-speed torque for a joint of a robot includes a printed circuit board assembly (PCBA) having a collocated joint processor and high-speed communication bus. The PCBA may also include a power inverter module (PIM) and local sensor conditioning electronics (SCE) for processing sensor data from one or more motor position sensors. Torque control of a motor of the joint is provided via the PCBA as a high-speed torque loop. Each joint processor may be embedded within or collocated with the robotic joint being controlled. Collocation of the joint processor, PIM, and high-speed bus may increase noise immunity of the control system, and the localized processing of sensor data from the joint motor at the joint level may minimize bus cabling to and from each control node. The joint processor may include a field programmable gate array (FPGA).

Expert system for adhesive selection of composite material joints

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allen, R.B.; Vanderveldt, H.H.

The development of composite joining is still in its infancy and much is yet to be learned. Consequently, this field is developing rapidly and new advances occur with great regularity. The need for up-to-date information and expertise in engineering and planning of composite materials, especially in critical applications, is acute. The American Joining Institute`s (AJI) development of JOINEXCELL (an off-line intelligent planner for joining composite materials) is an intelligent engineering/planning software system that incorporates the knowledge of several experts which can be expanded as these developments occur. Phase I effort of JOINEXCELL produced an expert system for adhesive selection, JOINADSELECT,more » for composite material joints. The expert system successfully selects from over 26 different adhesive families for 44 separate material types and hundreds of application situations. Through a series of design questions the expert system selects the proper adhesive for each particular design. Performing this {open_quotes}off-line{close_quotes} engineering planning by computer allows the decision to be made with full knowledge of the latest information about materials and joining procedures. JOINADSELECT can greatly expedite the joining design process, thus yielding cost savings.« less

Mechanical end joint system for connecting structural column elements

NASA Technical Reports Server (NTRS)

Bush, Harold G. (Inventor); Mikulas, Martin M., Jr. (Inventor); Wallsom, Richard E. (Inventor)

1990-01-01

A mechanical end joint system is presented that eliminates the possibility of free movements between the joint halves during loading or vibration. Both node joint body (NJB) and column end joint body (CEJB) have cylindrical engaging ends. Each of these ends has an integral semicircular tongue and groove. The two joint halves are engaged transversely - the tongue of the NJB mating with the groove of the CEJB and vice versa. The joint system employs a spring loaded internal latch mechanism housed in the CEJB. During mating, this mechanism is pushed away from the NJB and enters the NJB when mating is completed. In order to lock the joint and add a preload across the tongue and groove faces, an operating ring collar is rotated through 45 deg causing an internal mechanism to compress a Belleville washer preload mechanism. This causes an equal and opposite force to be exerted on the latch bolt and the latch plunger. This force presses the two joint halves tightly together. In order to prevent inadvertent disassembly, a secondary lock is also engaged when the joint is closed. Plungers are carried in the operating ring collar. When the joint is closed, the plungers fall into tracks on the CEJB, which allows the joint to be opened only when the operating ring collar and plungers are pushed directly away from the joining end. One application of this invention is the rapid assembly and disassembly of diverse skeletal framework structures which is extremely important in many projects involving the exploration of space.

Depression in the elderly: Does family system play a role? A cross-sectional study

PubMed Central

Taqui, Ather M; Itrat, Ahmed; Qidwai, Waris; Qadri, Zeeshan

2007-01-01

Background The most common geriatric psychiatric disorder is depression. The role of family systems in depression among the elderly has not been studied extensively. It has been suggested that urbanization promotes nucleation of family systems and a decrease in care and support for the elderly. We conducted this study in Karachi, a large urban city of Pakistan, to determine the relationship between the type of family system and depression. We also determined the prevalence of depression in the elderly, as well as correlation of depression with other important socio-demographic variables. Methods A cross-sectional study was carried out in the premises of a tertiary care hospital in Karachi, Pakistan. Questionnaire based interviews were conducted among the elderly people visiting the hospital. Depression was assessed using the 15-item Geriatric Depression Scale. Results Four hundred subjects aged 65 and above were interviewed. The age of majority of the subjects ranged from 65 to 74 years. Seventy eight percent of the subjects were male. The prevalence of depression was found to be 19.8%. Multiple logistic regression analysis revealed that the following were significant (p < 0.05) independent predictors of depression: nuclear family system, female sex, being single or divorced/widowed, unemployment and having a low level of education. The elderly living in a nuclear family system were 4.3 times more likely to suffer from depression than those living in a joint family system (AOR = 4.3 [95% CI = 2.4–7.6]). Conclusion The present study found that residing in a nuclear family system is a strong independent predictor of depression in the elderly. The prevalence of depression in the elderly population in our study was moderately high and a cause of concern. The transition in family systems towards nucleation may have a major deleterious effect on the physical and mental health of the elderly. PMID:17961255

46 CFR 154.506 - Mechanical expansion joint: Limits in a piping system.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 5 2013-10-01 2013-10-01 false Mechanical expansion joint: Limits in a piping system..., Construction and Equipment Cargo and Process Piping Systems § 154.506 Mechanical expansion joint: Limits in a piping system. Mechanical expansion joints in a piping system outside of a cargo tank: (a) May be...

46 CFR 154.506 - Mechanical expansion joint: Limits in a piping system.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 5 2014-10-01 2014-10-01 false Mechanical expansion joint: Limits in a piping system..., Construction and Equipment Cargo and Process Piping Systems § 154.506 Mechanical expansion joint: Limits in a piping system. Mechanical expansion joints in a piping system outside of a cargo tank: (a) May be...

46 CFR 154.506 - Mechanical expansion joint: Limits in a piping system.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 5 2011-10-01 2011-10-01 false Mechanical expansion joint: Limits in a piping system..., Construction and Equipment Cargo and Process Piping Systems § 154.506 Mechanical expansion joint: Limits in a piping system. Mechanical expansion joints in a piping system outside of a cargo tank: (a) May be...

46 CFR 154.506 - Mechanical expansion joint: Limits in a piping system.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 5 2012-10-01 2012-10-01 false Mechanical expansion joint: Limits in a piping system..., Construction and Equipment Cargo and Process Piping Systems § 154.506 Mechanical expansion joint: Limits in a piping system. Mechanical expansion joints in a piping system outside of a cargo tank: (a) May be...

46 CFR 154.506 - Mechanical expansion joint: Limits in a piping system.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Mechanical expansion joint: Limits in a piping system..., Construction and Equipment Cargo and Process Piping Systems § 154.506 Mechanical expansion joint: Limits in a piping system. Mechanical expansion joints in a piping system outside of a cargo tank: (a) May be...

Airborne and Maritime/Fixed Station Joint Tactical Radio System (AMF JTRS)

DTIC Science & Technology

2015-12-01

Selected Acquisition Report (SAR) RCS: DD-A&T(Q&A)823-421 Airborne & Maritime/Fixed Station Joint Tactical Radio System (AMF JTRS) As of FY 2017...Information Program Name Airborne & Maritime/Fixed Station Joint Tactical Radio System (AMF JTRS) DoD Component Army Responsible Office References SAR...UNCLASSIFIED 5 Mission and Description Airborne & Maritime/Fixed Station Joint Tactical Radio System (AMF JTRS) products are software programmable

Ultrasonic scanning system for in-place inspection of brazed tube joints

NASA Technical Reports Server (NTRS)

Haynes, J. L.; Wages, C. G.; Haralson, H. S. (Inventor)

1973-01-01

A miniaturized ultrasonic scanning system for nondestructive in-place, non-immersion testing of brazed joints in stainless-steel tubing is described. The system is capable of scanning brazed tube joints, with limited clearance access, in 1/4 through 5/8 inch union, tee, elbow and cross configurations. The system has the capability to detect defective conditions now associated with material density changes in addition to those which are depended upon density variations. The system includes a miniaturized scanning head assembly that fits around a tube joint and rotates the transducer around and down the joint in a continuous spiral motion. The C-scan recorder is similar in principle to conventional models except that it was specially designed to track the continuous spiral scan of the tube joint. The scanner and recorder can be operated with most commercially available ultrasonic flaw detectors.

Joint design of QC-LDPC codes for coded cooperation system with joint iterative decoding

NASA Astrophysics Data System (ADS)

Zhang, Shunwai; Yang, Fengfan; Tang, Lei; Ejaz, Saqib; Luo, Lin; Maharaj, B. T.

2016-03-01

In this paper, we investigate joint design of quasi-cyclic low-density-parity-check (QC-LDPC) codes for coded cooperation system with joint iterative decoding in the destination. First, QC-LDPC codes based on the base matrix and exponent matrix are introduced, and then we describe two types of girth-4 cycles in QC-LDPC codes employed by the source and relay. In the equivalent parity-check matrix corresponding to the jointly designed QC-LDPC codes employed by the source and relay, all girth-4 cycles including both type I and type II are cancelled. Theoretical analysis and numerical simulations show that the jointly designed QC-LDPC coded cooperation well combines cooperation gain and channel coding gain, and outperforms the coded non-cooperation under the same conditions. Furthermore, the bit error rate performance of the coded cooperation employing jointly designed QC-LDPC codes is better than those of random LDPC codes and separately designed QC-LDPC codes over AWGN channels.

Colorado River Sewer System Joint Venture to Upgrade Wastewater System

EPA Pesticide Factsheets

SAN FRANCISCO -Today, the Colorado River Sewer System Joint Venture, located in Parker, Ariz. entered into an agreement with the EPA to upgrade their wastewater treatment system to meet stringent water quality standards. The cost of the upgrade is ap

Virtual Passive Controller for Robot Systems Using Joint Torque Sensors

NASA Technical Reports Server (NTRS)

Aldridge, Hal A.; Juang, Jer-Nan

1997-01-01

This paper presents a control method based on virtual passive dynamic control that will stabilize a robot manipulator using joint torque sensors and a simple joint model. The method does not require joint position or velocity feedback for stabilization. The proposed control method is stable in the sense of Lyaponov. The control method was implemented on several joints of a laboratory robot. The controller showed good stability robustness to system parameter error and to the exclusion of nonlinear dynamic effects on the joints. The controller enhanced position tracking performance and, in the absence of position control, dissipated joint energy.

Identification of a Ninein (NIN) mutation in a family with spondyloepimetaphyseal dysplasia with joint laxity (leptodactylic type)-like phenotype.

PubMed

Grosch, Melanie; Grüner, Barbara; Spranger, Stephanie; Stütz, Adrian M; Rausch, Tobias; Korbel, Jan O; Seelow, Dominik; Nürnberg, Peter; Sticht, Heinrich; Lausch, Ekkehart; Zabel, Bernhard; Winterpacht, Andreas; Tagariello, Andreas

2013-01-01

Spondyloepimetaphyseal dysplasia with joint laxity-leptodactylic type (SEMDJL2) is an autosomal dominant skeletal dysplasia which is characterized by midface hypoplasia, short stature, joint laxity with dislocations, genua valga, progressive scoliosis, and slender fingers. Recently, heterozygous missense mutations in KIF22, a gene which encodes a member of the kinesin-like protein family, have been identified in sporadic as well as familial cases of SEMDJL2. In the present study homozygosity mapping and whole-exome sequencing were combined to analyze a consanguineous family with a phenotype resembling SEMDJL2. We identified homozygous missense mutations in the two nearby genes NIN (Ninein) and POLE2 (DNA polymerase epsilon subunit B) which segregate with the disease in the family and were not present in 500 healthy control individuals and in the 1094 control individuals contained within the 1000-genomes database. We present several lines of evidence that mutant Ninein is most likely causative for the SEMDJL2-like phenotype. The centrosomal protein NIN shows a functional relationship with KIF22 and other proteins associated with chromosome congression/movement, centrosomal function, and ciliogenesis, which have been associated with skeletal dysplasias. Moreover, compound heterozygous missense mutations at more N-terminal positions of Ninein have very recently been identified in a family with microcephalic primordial dwarfism. Together with the present report this strongly supports a fundamental role of Ninein in skeletal development. Copyright © 2013 International Society of Matrix Biology. Published by Elsevier B.V. All rights reserved.

FE analysis of SMA-based bio-inspired bone-joint system

NASA Astrophysics Data System (ADS)

Yang, S.; Seelecke, S.

2009-10-01

This paper presents the finite element (FE) analysis of a bio-inspired bone-joint system. Motivated by the BATMAV project, which aims at the development of a micro-air-vehicle platform that implements bat-like flapping flight capabilities, we study the actuation of a typical elbow joint, using shape memory alloy (SMA) in a dual manner. Micro-scale martensitic SMA wires are used as 'metal muscles' to actuate a system of humerus, elbow joint and radius, in concert with austenitic wires, which operate as flexible joints due to their superelastic character. For the FE analysis, the humerus and radius are modeled as standard elastic beams, while the elbow joint and muscle wires use the Achenbach-Muller-Seelecke SMA model as beams and cable elements, respectively. The particular focus of the paper is on the implementation of the above SMA model in COMSOL.

Family learning with mobile devices in the outdoors: Designing an e-Trailguide to facilitate families' joint engagement with the natural world

NASA Astrophysics Data System (ADS)

McClain, Lucy R.

This study describes the implementation of a self-guiding mobile learning tool designed to support families' engagements with the natural world as they explored the flora and fauna along one nature trail at an environmental center. Thirty-one family groups (n = 105 individuals) participated in this study during the summer season and used an iPad-based e-Trailguide during their nature walk. Design-based research methods guided this study's design, which focused on the third iteration of the e-Trailguide. Data included evaluation of families' content knowledge gains related to the local biodiversity as revealed through post-hike interviews, while videorecords of each family's nature walk experience were also collected. Qualitative analyses focused on the design features within the e-Trailguide that supported the families' technology-mediated engagements with nature and their interactions with each other at one Discovery Spot along the nature trail. Findings include: (a) open-ended interviews after the e-Trailguide experience provided a descriptive understanding of the families' conceptual knowledge gains; (b) four place-based design features within the e-Trailguide enabled and supported families' observational, pointing, and tactile investigation engagements with the natural world; (c) parents took on teacher-like roles for their children by connecting information from the e-Trailguide to the natural objects nearby as evidenced through their frequency of pointing gestures; and (d) the development of an analytical framework related to joint observation strategies used between family members to support science-related sense making. Design recommendations for the future implementation of e-Trailguides in outdoor settings include the incorporation of place-based observational questions, place-based textual prompts for focusing observations, drawing activities to record observations, and place-based images to support identification of wildlife. Key words: family learning

Field joint environmental protection system vibration/pressurization qualification

NASA Technical Reports Server (NTRS)

Cook, M.

1989-01-01

The procedures used and results obtained from vibration testing the redesigned solid rocket motor (RSRM) field joint environmental protection system (FJEPS), hereafter referred to as the joint protection system (JPS) are documented. The major purposes were to certify that the flight-designed JPS will withstand the dynamic environmental conditions of the redesigned solid rocket booster, and to certify that the cartridge check valve (vent valve) will relieve pressure build-up under the JPS during the initial 120 sec of flight. Also, an evaluation of the extruded cork insulation bonding was performed after the vibration testing.

An interprofessional exploration of nursing and social work roles when working jointly with families.

PubMed

Bennett, Elaine; Hauck, Yvonne; Radford, Georgina; Bindahneem, Sakina

2016-01-01

Ngala, an early parenting not-for-profit organisation in Western Australia, has provided services to families with young children since 1890. Child health nurses and mothercraft nurses were the primary workforce until the 1980s when a social worker was employed and a new era of interprofessional collaboration began. Evidence to date has focused on nursing workforce, interprofessional education, and interprofessional teams. Little is known about the roles of nursing and social work when working jointly with families. A new service commenced in 2012 for families with children with developmental delays. Social workers and child health nurses were employed for this service model. Our study aim was to explore the perceptions of how nurses and social workers work together with a family providing psychosocial support across a new service. The study was conducted alongside implementation of this new service. An exploratory case study approach was adopted to generate an in-depth understanding of the roles of nurses and social workers. In total, 22 semi-structured interviews and one focus group across the first year of implementing the new service were undertaken. Analysis of these data revealed four major themes. Findings presented in this article will inform further reflection and consideration into the future interprofessional workforce priorities and requirements for Early Parenting Services.

A Thumb Carpometacarpal Joint Coordinate System Based on Articular Surface Geometry

PubMed Central

Halilaj, Eni; Rainbow, Michael J.; Got, Christopher; Moore, Douglas C.; Crisco, Joseph J.

2013-01-01

The thumb carpometacarpal (CMC) joint is a saddle-shaped articulation whose in vivo kinematics can be explored more accurately with computed tomography (CT) imaging methods than with previously used skin-based marker systems. These CT-based methods permit a detailed analysis of the morphology of the joint, and thus the prominent saddle-shaped geometry can be used to define a coordinate system that is inherently aligned with the primary directions of motion at the joint. The purpose of this study was to develop a CMC joint coordinate systems that is based on the computed principal directions of curvature on the trapezium and the first metacarpal. We evaluated the new coordinate system using bone surface models segmented from the CT scans of twenty-four healthy subjects. An analysis of sensitivity to the manual selection of articular surfaces resulted in mean orientation differences of 0.7±0.7° and mean location differences of 0.2±0.1mm. Inter-subject variability, which mostly emanates from anatomical differences, was evaluated with whole bone registration and resulted in mean orientation differences of 3.1±2.7° and mean location differences of 0.9±0.5mm. The proposed joint coordinate system addresses concerns of repeatability associated with bony landmark identification and provides a robust platform for describing the complex kinematics of the CMC joint. PMID:23357698

A photoacoustic tomography and ultrasound combined system for proximal interphalangeal joint imaging

NASA Astrophysics Data System (ADS)

Xu, Guan; Rajian, Justin R.; Girish, Gandikota; Wang, Xueding

2013-03-01

A photoacoustic (PA) and ultrasound (US) dual modality system for imaging human peripheral joints is introduced. The system utilizes a commercial US unit for both US control imaging and PA signal acquisition. Preliminary in vivo evaluation of the system on normal volunteers revealed that this system can recover both the structural and functional information of intra- and extra-articular tissues. Presenting both morphological and pathological information in joint, this system holds promise for diagnosis and characterization of inflammatory joint diseases such as rheumatoid arthritis.

Neural joint control for Space Shuttle Remote Manipulator System

NASA Technical Reports Server (NTRS)

Atkins, Mark A.; Cox, Chadwick J.; Lothers, Michael D.; Pap, Robert M.; Thomas, Charles R.

1992-01-01

Neural networks are being used to control a robot arm in a telerobotic operation. The concept uses neural networks for both joint and inverse kinematics in a robotic control application. An upper level neural network is trained to learn inverse kinematic mappings. The output, a trajectory, is then fed to the Decentralized Adaptive Joint Controllers. This neural network implementation has shown that the controlled arm recovers from unexpected payload changes while following the reference trajectory. The neural network-based decentralized joint controller is faster, more robust and efficient than conventional approaches. Implementations of this architecture are discussed that would relax assumptions about dynamics, obstacles, and heavy loads. This system is being developed to use with the Space Shuttle Remote Manipulator System.

Family System Characteristics, Parental Behaviors, and Adolescent Family Life Satisfaction.

ERIC Educational Resources Information Center

Henry, Carolyn S.

1994-01-01

Describes investigation examining adolescents' perceptions of overall family system characteristics, parental behaviors, and demographic factors in relation to adolescent family life satisfaction. Results indicate family bonding, family flexibility, parental support, and adolescent age are positively related to adolescent family life satisfaction,…

Design considerations for bridge deck joint-sealing systems : summary report.

DOT National Transportation Integrated Search

1992-07-01

This is a report summary which summarizes a three year research effort related to the study of bridge deck expansion joint movements. Bridge deck expansion joint systems often develop serious problems requiring extensive and expensive maintenance. Th...

Therapy for Family Systems.

ERIC Educational Resources Information Center

Rosmann, Michael R.

A family therapy model, based on a conceptualization of the family as a behavioral system whose members interact adaptively so that an optimal level of functioning is maintained within the system, is described. The divergent roots of this conceptualization are discussed briefly, as are the treatment approaches based on it. The author's model,…

Preloaded joint analysis methodology for space flight systems

NASA Technical Reports Server (NTRS)

Chambers, Jeffrey A.

1995-01-01

This report contains a compilation of some of the most basic equations governing simple preloaded joint systems and discusses the more common modes of failure associated with such hardware. It is intended to provide the mechanical designer with the tools necessary for designing a basic bolted joint. Although the information presented is intended to aid in the engineering of space flight structures, the fundamentals are equally applicable to other forms of mechanical design.

Family Medicine's Waltz with Systems

ERIC Educational Resources Information Center

Downing, Raymond

2012-01-01

Family Medicine first formally confronted systems thinking with the adoption of the biopsychosocial model for understanding disease in a holistic manner; this is a description of a natural system. More recently, Family Medicine has been consciously engaged in developing itself as a system for delivering health care, an artificial system. We make…

Joint Space Operations Center (JSpOC) Mission System Increment 3 (JMS Inc 3)

DTIC Science & Technology

2016-03-01

2016 Major Automated Information System Annual Report Joint Space Operations Center (JSpOC) Mission System Increment 3 (JMS Inc 3) Defense...1725 DSN Phone: DSN Fax: Date Assigned: May 16, 2014 Program Information Program Name Joint Space Operations Center (JSpOC) Mission System...approved program baseline; therefore, no Original Estimate has been established. JMS Inc 3 2016 MAR UNCLASSIFIED 4 Program Description The Joint Space

Discrepancies in Autonomy and Relatedness Promoting Behaviors of Substance Using Mothers and Their Children: The Effects of a Family Systems Intervention

PubMed Central

Slesnick, Natasha

2016-01-01

Parents’ and children’s autonomy and relatedness behaviors are associated with a wide range of child outcomes. Yet, little is known about how parents and children’s autonomy and relatedness behaviors jointly influence child outcomes. The current study captured this joint influence by exploring the longitudinal trajectory of mother–child discrepancies in autonomy and relatedness behaviors and its association with child problem behaviors. The effects of a family systems intervention on the trajectory of mother–child discrepancies were also examined. The sample included 183 substance using mothers and their children (M age = 11.54 years, SD = 2.55, range 8–16; 48 % females). Both the mother and child completed an assessment at baseline, 6- and 18-month post-baseline. A person-centered analysis identified subgroups varying in mother–child discrepancy patterns in their autonomy and relatedness behaviors. The results also showed that participation in the family systems therapy was associated with decreased mother–child discrepancies, and also a synchronous increase in mother’s and child’s autonomy and relatedness. Additionally, increased mother–child discrepancies and mother–child dyads showing no change in autonomy and relatedness was associated with higher levels of children’s problem behaviors. The findings reveal a dynamic process of mother–child discrepancies in autonomy and relatedness behaviors related to child outcomes. The findings also support the effectiveness of the family systems therapy, and highlight the importance of understanding the complexities in family interactions when explaining children’s problem behaviors. PMID:27480271

Discrepancies in Autonomy and Relatedness Promoting Behaviors of Substance Using Mothers and Their Children: The Effects of a Family Systems Intervention.

PubMed

Zhang, Jing; Slesnick, Natasha

2017-03-01

Parents' and children's autonomy and relatedness behaviors are associated with a wide range of child outcomes. Yet, little is known about how parents and children's autonomy and relatedness behaviors jointly influence child outcomes. The current study captured this joint influence by exploring the longitudinal trajectory of mother-child discrepancies in autonomy and relatedness behaviors and its association with child problem behaviors. The effects of a family systems intervention on the trajectory of mother-child discrepancies were also examined. The sample included 183 substance using mothers and their children (M age = 11.54 years, SD = 2.55, range 8-16; 48 % females). Both the mother and child completed an assessment at baseline, 6- and 18-month post-baseline. A person-centered analysis identified subgroups varying in mother-child discrepancy patterns in their autonomy and relatedness behaviors. The results also showed that participation in the family systems therapy was associated with decreased mother-child discrepancies, and also a synchronous increase in mother's and child's autonomy and relatedness. Additionally, increased mother-child discrepancies and mother-child dyads showing no change in autonomy and relatedness was associated with higher levels of children's problem behaviors. The findings reveal a dynamic process of mother-child discrepancies in autonomy and relatedness behaviors related to child outcomes. The findings also support the effectiveness of the family systems therapy, and highlight the importance of understanding the complexities in family interactions when explaining children's problem behaviors.

The effects of load on system and lower-body joint kinetics during jump squats.

PubMed

Moir, Gavin L; Gollie, Jared M; Davis, Shala E; Guers, John J; Witmer, Chad A

2012-11-01

To investigate the effects of different loads on system and lower-body kinetics during jump squats, 12 resistance-trained men performed jumps under different loading conditions: 0%, 12%, 27%, 42%, 56%, 71%, and 85% of 1-repetition maximum (1-RM). System power output was calculated as the product of the vertical component of the ground reaction force and the vertical velocity of the bar during its ascent. Joint power output was calculated during bar ascent for the hip, knee, and ankle joints, and was also summed across the joints. System power output and joint power at knee and ankle joints were maximized at 0% 1-RM (p < 0.001) and followed the linear trends (p < 0.001) caused by power output decreasing as the load increased. Power output at the hip was maximized at 42% 1-RM (p = 0.016) and followed a quadratic trend (p = 0.030). Summed joint power could be predicted from system power (p < 0.05), while system power could predict power at the knee and ankle joints under some of the loading conditions. Power at the hip could not be predicted from system power. System power during loaded jumps reflects the power at the knee and ankle, while power at the hip does not correspond to system power.

[Development of polyaxial locking plate screw system of sacroiliac joint].

PubMed

Fan, Weijie; Xie, Xuesong; Zhou, Shuping; Zhang, Yonghu

2014-09-01

To develop an instrument for sacroiliac joint fixation with less injury and less complications. Firstly, 18 adult pelvic specimens (8 males and 10 females) were used to measure the anatomical data related to the locking plates and locking screws on the sacrum and ilium, and the polyaxial locking plate screw system of the sacroiliac joint was designed according to the anatomic data. This system was made of medical titanium alloy. Then 4 adult male plevic specimens were harvested and the experiment was divided into 3 groups: group A (normal pelvic), group B (the dislocated sacroiliac joint fixed with sacroiliac screws), and group C (the dislocated sacroiliac joint fixed with polyaxial locking plate screw system). The vertical displacement of sacroiliac joint under the condition of 0-700 N vertical load and the horizontal displacement on angle under the condition of 0-12 N·m torsional load were compared among the 3 groups by using the biological material test system. Finally, the simulated application test was performed on 1 adult male cadaveric specimen to observe soft tissue injury and the position of the locking plate and screw by X-ray films. According to the anatomic data of the sacrum and ilium, the polyaxial locking plate screw system of the sacroiliac joint was designed. The biomechanical results showed that the vertical displacement of the sacroiliac joint under the condition of 0-700 N vertical load in group A was significantly bigger than that in group B and group C (P < 0.05), but there was no significant difference between group B and group C (P > 0.05). The horizontal displacement on angle under the condition of 0-12 N·m torsional load in group A was significantly less than that in group B and group C (P < 0.05). The horizontal displacement on angle under the condition of 0-6 N·m torsional load in group B was bigger than that in group C, and the horizontal displacement on angle under the condition of 6-12 N·m torsional load in group B was less than

Joint digital signal processing for superchannel coherent optical communication systems.

PubMed

Liu, Cheng; Pan, Jie; Detwiler, Thomas; Stark, Andrew; Hsueh, Yu-Ting; Chang, Gee-Kung; Ralph, Stephen E

2013-04-08

Ultra-high-speed optical communication systems which can support ≥ 1Tb/s per channel transmission will soon be required to meet the increasing capacity demand. However, 1Tb/s over a single carrier requires either or both a high-level modulation format (i.e. 1024QAM) and a high baud rate. Alternatively, grouping a number of tightly spaced "sub-carriers" to form a terabit superchannel increases channel capacity while minimizing the need for high-level modulation formats and high baud rate, which may allow existing formats, baud rate and components to be exploited. In ideal Nyquist-WDM superchannel systems, optical subcarriers with rectangular spectra are tightly packed at a channel spacing equal to the baud rate, thus achieving the Nyquist bandwidth limit. However, in practical Nyquist-WDM systems, precise electrical or optical control of channel spectra is required to avoid strong inter-channel interference (ICI). Here, we propose and demonstrate a new "super receiver" architecture for practical Nyquist-WDM systems, which jointly detects and demodulates multiple channels simultaneously and mitigates the penalties associated with the limitations of generating ideal Nyquist-WDM spectra. Our receiver-side solution relaxes the filter requirements imposed on the transmitter. Two joint DSP algorithms are developed for linear ICI cancellation and joint carrier-phase recovery. Improved system performance is observed with both experimental and simulation data. Performance analysis under different system configurations is conducted to demonstrate the feasibility and robustness of the proposed joint DSP algorithms.

System Wide Joint Position Sensor Fault Tolerance in Robot Systems Using Cartesian Accelerometers

NASA Technical Reports Server (NTRS)

Aldridge, Hal A.; Juang, Jer-Nan

1997-01-01

Joint position sensors are necessary for most robot control systems. A single position sensor failure in a normal robot system can greatly degrade performance. This paper presents a method to obtain position information from Cartesian accelerometers without integration. Depending on the number and location of the accelerometers. the proposed system can tolerate the loss of multiple position sensors. A solution technique suitable for real-time implementation is presented. Simulations were conducted using 5 triaxial accelerometers to recover from the loss of up to 4 joint position sensors on a 7 degree of freedom robot moving in general three dimensional space. The simulations show good estimation performance using non-ideal accelerometer measurements.

Cotton-type and joint invariants for linear elliptic systems.

PubMed

Aslam, A; Mahomed, F M

2013-01-01

Cotton-type invariants for a subclass of a system of two linear elliptic equations, obtainable from a complex base linear elliptic equation, are derived both by spliting of the corresponding complex Cotton invariants of the base complex equation and from the Laplace-type invariants of the system of linear hyperbolic equations equivalent to the system of linear elliptic equations via linear complex transformations of the independent variables. It is shown that Cotton-type invariants derived from these two approaches are identical. Furthermore, Cotton-type and joint invariants for a general system of two linear elliptic equations are also obtained from the Laplace-type and joint invariants for a system of two linear hyperbolic equations equivalent to the system of linear elliptic equations by complex changes of the independent variables. Examples are presented to illustrate the results.

Cotton-Type and Joint Invariants for Linear Elliptic Systems

PubMed Central

Aslam, A.; Mahomed, F. M.

2013-01-01

Cotton-type invariants for a subclass of a system of two linear elliptic equations, obtainable from a complex base linear elliptic equation, are derived both by spliting of the corresponding complex Cotton invariants of the base complex equation and from the Laplace-type invariants of the system of linear hyperbolic equations equivalent to the system of linear elliptic equations via linear complex transformations of the independent variables. It is shown that Cotton-type invariants derived from these two approaches are identical. Furthermore, Cotton-type and joint invariants for a general system of two linear elliptic equations are also obtained from the Laplace-type and joint invariants for a system of two linear hyperbolic equations equivalent to the system of linear elliptic equations by complex changes of the independent variables. Examples are presented to illustrate the results. PMID:24453871

A joint equalization algorithm in high speed communication systems

NASA Astrophysics Data System (ADS)

Hao, Xin; Lin, Changxing; Wang, Zhaohui; Cheng, Binbin; Deng, Xianjin

2018-02-01

This paper presents a joint equalization algorithm in high speed communication systems. This algorithm takes the advantages of traditional equalization algorithms to use pre-equalization and post-equalization. The pre-equalization algorithm takes the advantage of CMA algorithm, which is not sensitive to the frequency offset. Pre-equalization is located before the carrier recovery loop in order to make the carrier recovery loop a better performance and overcome most of the frequency offset. The post-equalization takes the advantage of MMA algorithm in order to overcome the residual frequency offset. This paper analyzes the advantages and disadvantages of several equalization algorithms in the first place, and then simulates the proposed joint equalization algorithm in Matlab platform. The simulation results shows the constellation diagrams and the bit error rate curve, both these results show that the proposed joint equalization algorithm is better than the traditional algorithms. The residual frequency offset is shown directly in the constellation diagrams. When SNR is 14dB， the bit error rate of the simulated system with the proposed joint equalization algorithm is 103 times better than CMA algorithm, 77 times better than MMA equalization, and 9 times better than CMA-MMA equalization.

Background for Joint Systems Aspects of AIR 6000

DTIC Science & Technology

2000-04-01

Checkland’s Soft Systems Methodology [7, 8,9]. The analytical techniques that are proposed for joint systems work are based on calculating probability...Supporting Global Interests 21 DSTO-CR-0155 SLMP Structural Life Management Plan SOW Stand-Off Weapon SSM Soft Systems Methodology UAV Uninhabited Aerial... Systems Methodology in Action, John Wiley & Sons, Chichester, 1990. [101 Pearl, Judea, Probabilistic Reasoning in Intelligent Systems: Networks of Plausible

[Systemic family therapy].

PubMed

Desmarouet, Jean; Goldziuk, Michel

2014-01-01

Systemic family therapy traces its roots to several disciplines and invites us to change our focus on the world. In the framework of therapy, it is based on a particular approach which aims not only to help the patient who is suffering, but also to support the other members of the family in order to find a new balance and a more flexible way of functioning.

Successful treatment of facial systemic lupus erythematosus lesions with Dr Michaels® (Soratinex®) product family. A case report.

PubMed

Tirant, M; Bayer, P; Hercogovấ, J; Fioranelli, M; Gianfaldoni, S; Chokoeva, A A; Tchernev, G; Wollina, U; Novotny, F; Roccia, M G; Maximov, G K; França, K; Lotti, T

2016-01-01

Systemic lupus erythematosus (SLE) is a complex autoimmune disease in which the body’s immune system mistakenly attacks healthy tissue. It can affect the skin, joints, kidneys, brain and other organs. We report the case of a 7-year-old female patient with facial lesions of SLE since the age of 5. There was no significant family history and patient had been a healthy child from birth. The child presented with a malar rash, also known as a butterfly rash, with distribution over the cheeks but sparing the nasal bridge. This case represents the efficacy of the Dr. Michaels® (Soratinex®) product family in the successful resolution of facial lesions of SLE.

Systems engineering in a joint program environment: the joint helmet-mounted cueing system

NASA Astrophysics Data System (ADS)

Wilkins, Donald F.

1999-07-01

The Joint Helmet Mounted Cueing System (JHMCS) is a design program involving two airframe companies (Boeing and Lockheed Martin), two services (USAF and USN) and four aircraft platforms: the F-22, the F-16, the F/A-18 and the F-15. Developing equipment requirements for the combined operational and environmental needs of these diverse communities is a significant challenge. In addition, the team is geographically dispersed which presented challenges in communication and coordination. This paper details the lessons learned in producing a cost-effective design within a short development schedule and makes recommendations for future development programs.

Family Systems Training for Medical Students.

PubMed

Thabrew, Hiran

2018-05-01

To evaluate whether a workshop on family systems delivered to medical students could improve participants' understanding of families from a systemic point of view and help them recognise and address systemic issues that may be affecting their patients. Fifth year (senior) medical students ( n = 36) from the University of Auckland participated in a 90-min workshop about family systems. Pre- and post-workshop, self-reported measures of knowledge and confidence were completed and qualitative feedback was also obtained from participants. The workshop was well received and its interactive and role-play based nature were particularly appreciated. Participants reported gains in all explored areas of knowledge and understanding, suggesting that the workshop met its desired aims. This workshop is an educationally effective and expedient way to equip medical students with some knowledge and understanding about family systems. It may benefit their future work with individual patients and families.

Optimised robot-based system for the exploration of elastic joint properties.

PubMed

Frey, M; Burgkart, R; Regenfelder, F; Riener, R

2004-09-01

Numerous publications provide measured biomechanical data relating to synovial joints. However, in general, they do not reflect the non-linear elastic joint properties in detail or do not consider all degrees of freedom (DOF), or the quantity of data is sparse. To perform more comprehensive, extended measurements of elastic joint properties, an optimised robot-based approach was developed. The basis was an industrial, high-precision robot that was capable of applying loads to the joint and measuring the joint displacement in 6 DOF. The system was equipped with novel, custom-made control hardware. In contrast to the commonly used sampling rates that are below 100 Hz, a rate of 4 kHz was realised for each DOF. This made it possible to implement advanced, highly dynamic, quasi-continuous closed-loop controllers. Thus oscillations of the robot were avoided, and measurements were speeded up. The stiffness of the entire system was greater than 44 kNm(-1) and 22 Nm deg(-1), and the maximum difference between two successive measurements was less than 0.5 deg. A sophisticated CT-based referencing routine facilitated the matching of kinematic data with the individual anatomy of the tested joint. The detailed detection of the elastic varus-valgus properties of a human knee joint is described, and the need for high spatial resolution is demonstrated.

Patients' Perceptions of Joint Replacement Care in a Changing Healthcare System: A Qualitative Study

PubMed Central

Webster, Fiona; Bremner, Samantha; Katz, Joel; Watt-Watson, Judy; Kennedy, Deborah; Sawhney, Mona; McCartney, Colin

2014-01-01

Background: Ontario has introduced strategies over the past decade to reduce wait times and length of stay and improve access to physiotherapy for orthopaedic and other patients. The aim of this study is to explore patients' experiences of joint replacement care during a significant system change in their care setting. Methods: A secondary analysis was done on semi-structured qualitative interviews that were conducted in 2009 with 12 individuals who had undergone at least two hip or knee replacements five years apart at a specialized orthopaedic centre in Ontario, Canada. Interview transcripts were coded and then organized into themes. Results: Although the original study aimed to capture participants' experiences with changes in anaesthetic technique between their first and second joint replacements, the participants described several unrelated differences in the care they received during this period. For example, participants had difficulty obtaining a referral to an orthopaedic surgeon from their family physician. They also noted that the hospital stay and in-hospital physiotherapy they received were shorter after the second joint replacement surgery. They identified guidance from physiotherapists as an important component of their recovery, but sometimes had difficulty arranging physiotherapy after hospital discharge following their most recent surgery. Conclusions: The changes described between the first and second joint replacements provide the participants' perspective on the impact of policy changes on wait times, reduced lengths of hospital stay and physiotherapy access. The impact of these policy changes, often made in an attempt to improve access to care, had an unintended and detrimental effect on participants' perceptions and experiences of the quality of care provided. PMID:24726074

Family Counseling Interventions: Understanding Family Systems and the Referral Process.

ERIC Educational Resources Information Center

McWhirter, Ellen Hawley; And Others

1993-01-01

This article describes concepts underlying the idea of the "family as a system"; compares and contrasts four approaches to family therapy (those of Virginia Satir, Jay Haley, Murray Bowen, and Salvador Minuchin); and offers suggestions to teachers referring parents for family counseling. (DB)

Flight set 360L007 (STS-33R) field joint protection system, thermal protection system, and systems tunnel components, volume 7

NASA Technical Reports Server (NTRS)

1990-01-01

The performance of the thermal protection system, field joint protection system, and systems tunnel components of flight set 360L007 is presented as evaluated by postflight hardware inspection. The condition of both motors was similar to previous flights. Four aft edge strikes were noted on the ground environment instrumentation thermal protection system. The hits all left a clean substrate, indicating that the damage was caused by nozzle severance debris and/or water impact. No National Space Transportation System debris criteria for missing thermal protection system were violated. Two problem reports were written against the field joint protection system. The first concerned two cracks in the K5NA closeout over the trunnion/vent valve location on the left-hand aft field joint. A similar condition was observed on Flight 5 (360H005). The second problem report referred to a number of small surface cracks between two impact marks on the left-hand forward field joint. Neither area exhibited loose material or any abnormal heat effects, and they have no impact on flight safety.

Dynamic modeling and optimal joint torque coordination of advanced robotic systems

NASA Astrophysics Data System (ADS)

Kang, Hee-Jun

The development is documented of an efficient dynamic modeling algorithm and the subsequent optimal joint input load coordination of advanced robotic systems for industrial application. A closed-form dynamic modeling algorithm for the general closed-chain robotic linkage systems is presented. The algorithm is based on the transfer of system dependence from a set of open chain Lagrangian coordinates to any desired system generalized coordinate set of the closed-chain. Three different techniques for evaluation of the kinematic closed chain constraints allow the representation of the dynamic modeling parameters in terms of system generalized coordinates and have no restriction with regard to kinematic redundancy. The total computational requirement of the closed-chain system model is largely dependent on the computation required for the dynamic model of an open kinematic chain. In order to improve computational efficiency, modification of an existing open-chain KIC based dynamic formulation is made by the introduction of the generalized augmented body concept. This algorithm allows a 44 pct. computational saving over the current optimized one (O(N4), 5995 when N = 6). As means of resolving redundancies in advanced robotic systems, local joint torque optimization is applied for effectively using actuator power while avoiding joint torque limits. The stability problem in local joint torque optimization schemes is eliminated by using fictitious dissipating forces which act in the necessary null space. The performance index representing the global torque norm is shown to be satisfactory. In addition, the resulting joint motion trajectory becomes conservative, after a transient stage, for repetitive cyclic end-effector trajectories. The effectiveness of the null space damping method is shown. The modular robot, which is built of well defined structural modules from a finite-size inventory and is controlled by one general computer system, is another class of evolving

Selection of optimal multispectral imaging system parameters for small joint arthritis detection

NASA Astrophysics Data System (ADS)

Dolenec, Rok; Laistler, Elmar; Stergar, Jost; Milanic, Matija

2018-02-01

Early detection and treatment of arthritis is essential for a successful outcome of the treatment, but it has proven to be very challenging with existing diagnostic methods. Novel methods based on the optical imaging of the affected joints are becoming an attractive alternative. A non-contact multispectral imaging (MSI) system for imaging of small joints of human hands and feet is being developed. In this work, a numerical simulation of the MSI system is presented. The purpose of the simulation is to determine the optimal design parameters. Inflamed and unaffected human joint models were constructed with a realistic geometry and tissue distributions, based on a MRI scan of a human finger with a spatial resolution of 0.2 mm. The light transport simulation is based on a weighted-photon 3D Monte Carlo method utilizing CUDA GPU acceleration. An uniform illumination of the finger within the 400-1100 nm spectral range was simulated and the photons exiting the joint were recorded using different acceptance angles. From the obtained reflectance and transmittance images the spectral and spatial features most indicative of inflammation were identified. Optimal acceptance angle and spectral bands were determined. This study demonstrates that proper selection of MSI system parameters critically affects ability of a MSI system to discriminate the unaffected and inflamed joints. The presented system design optimization approach could be applied to other pathologies.

2000 Worldwide Joint Lessons Learned Conference. Forging a Future Joint Lessons Learned System. (Joint Center for Lessons Learned Special Bulletin. Volume 3, Special Issue 1, January 2001)

DTIC Science & Technology

2001-01-01

Management System (JTIMS) followed, and generated spirited discussion regarding the respective roles of JTIMS and the JLLP. The discussion concluded...waiting for the Director, Joint Staff�s signature and should be in official distribution by January 2001. An update on the Joint Training Information

A Systems Biology Approach to Synovial Joint Lubrication in Health, Injury, and Disease

PubMed Central

Hui, Alexander Y.; McCarty, William J.; Masuda, Koichi; Firestein, Gary S.; Sah, Robert L.

2013-01-01

The synovial joint contains synovial fluid (SF) within a cavity bounded by articular cartilage and synovium. SF is a viscous fluid that has lubrication, metabolic, and regulatory functions within synovial joints. SF contains lubricant molecules, including proteoglycan-4 and hyaluronan. SF is an ultrafiltrate of plasma with secreted contributions from cell populations lining and within the synovial joint space, including chondrocytes and synoviocytes. Maintenance of normal SF lubricant composition and function are important for joint homeostasis. In osteoarthritis, rheumatoid arthritis, and joint injury, changes in lubricant composition and function accompany alterations in the cytokine and growth factor environment and increased fluid and molecular transport through joint tissues. Thus, understanding the synovial joint lubrication system requires a multi-faceted study of the various parts of the synovial joint and their interactions. Systems biology approaches at multiple scales are being used to describe the molecular, cellular, and tissue components and their interactions that comprise the functioning synovial joint. Analyses of the transcriptome and proteome of SF, cartilage, and synovium suggest that particular molecules and pathways play important roles in joint homeostasis and disease. Such information may be integrated with physicochemical tissue descriptions to construct integrative models of the synovial joint that ultimately may explain maintenance of health, recovery from injury, or development and progression of arthritis. PMID:21826801

Internal family systems therapy for children in family therapy.

PubMed

Wark, L; Thomas, M; Peterson, S

2001-04-01

This article presents a developmentally supported implementation of Internal Family Systems Therapy for school-age children and their families. Relevant developmental characteristics of children are described. Suggestions for working with parents, child-oriented interventions, and a case example are presented.

Flight Set 360L006 STS-34 field joint protection system, thermal protection system, and systems tunnel components, volume 4

NASA Technical Reports Server (NTRS)

Wilkinson, J. P.

1990-01-01

The performance of the thermal protection system, field joint protection system, and systems tunnel components of Flight Set 360L006, are documented, as evaluated by postflight hardware inspection. The condition of both motors was similar to previous flights. Sixteen aft edge hits were noted on the ground environment instrumentation thermal protection system. Each hit left a clean substrate, indicating that the damage was caused by nozzle severance debris and/or water impact. No National Space and Transporation System debris criteria for missing thermal protection system were violated. One 5.0 by 1.0 in. unbond was observed on the left hand center field joint K5NA closeout and was elevated to an in-flight anomaly (STS-34-M-4) by the NASA Ice/Debris team. Aft edge damage to the K5NA and an associated black streak indicate that burning debris from the nozzle severance system was the likely cause of the damage. Minor divots caused by debris were seen on previous flights, but this is the first occurrence of a K5NA unbond. Since the unbond occurred after booster separation there is no impact on flight safety and no corrective actions was taken. The right hand center field joint primary heater failed the dielectric withstanding voltage test after joint closeout. The heater was then disabled by opening the circuit breaker, and the redundant heater was used. The redundant heater performed nominally during the launch countdown. A similar condition occurred on Flight 4 when a secondary joint heater failed the dielectric withstanding voltage test.

How weak values emerge in joint measurements on cloned quantum systems.

PubMed

Hofmann, Holger F

2012-07-13

A statistical analysis of optimal universal cloning shows that it is possible to identify an ideal (but nonpositive) copying process that faithfully maps all properties of the original Hilbert space onto two separate quantum systems, resulting in perfect correlations for all observables. The joint probabilities for noncommuting measurements on separate clones then correspond to the real parts of the complex joint probabilities observed in weak measurements on a single system, where the measurements on the two clones replace the corresponding sequence of weak measurement and postselection. The imaginary parts of weak measurement statics can be obtained by replacing the cloning process with a partial swap operation. A controlled-swap operation combines both processes, making the complete weak measurement statistics accessible as a well-defined contribution to the joint probabilities of fully resolved projective measurements on the two output systems.

Modified Denavit-Hartenberg parameters for better location of joint axis systems in robot arms

NASA Technical Reports Server (NTRS)

Barker, L. K.

1986-01-01

The Denavit-Hartenberg parameters define the relative location of successive joint axis systems in a robot arm. A recent justifiable criticism is that one of these parameters becomes extremely large when two successive joints have near-parallel rotational axes. Geometrically, this parameter then locates a joint axis system at an excessive distance from the robot arm and, computationally, leads to an ill-conditioned transformation matrix. In this paper, a simple modification (which results from constraining a transverse vector between successive joint rotational axes to be normal to one of the rotational axes, instead of both) overcomes this criticism and favorably locates the joint axis system. An example is given for near-parallel rotational axes of the elbow and shoulder joints in a robot arm. The regular and modified parameters are extracted by an algebraic method with simulated measurement data. Unlike the modified parameters, extracted values of the regular parameters are very sensitive to measurement accuracy.

Analysis on Sealing Reliability of Bolted Joint Ball Head Component of Satellite Propulsion System

NASA Astrophysics Data System (ADS)

Guo, Tao; Fan, Yougao; Gao, Feng; Gu, Shixin; Wang, Wei

2018-01-01

Propulsion system is one of the important subsystems of satellite, and its performance directly affects the service life, attitude control and reliability of the satellite. The Paper analyzes the sealing principle of bolted joint ball head component of satellite propulsion system and discuss from the compatibility of hydrazine anhydrous and bolted joint ball head component, influence of ground environment on the sealing performance of bolted joint ball heads, and material failure caused by environment, showing that the sealing reliability of bolted joint ball head component is good and the influence of above three aspects on sealing of bolted joint ball head component can be ignored.

Flight Set 360L002 (STS-27) field joint protection system, volume 7

NASA Technical Reports Server (NTRS)

Hale, Elgie

1989-01-01

This report contains the pre-launch functioning data of the Field Joint Protection System (JPS) used on STS-27. Also included is the post flight condition of the JPS components following the launch and recovery of the two redesigned solid rocket motors (RSRM) boosters. The JPS components are: (1) field joint heaters; (2) field joint sensors; (3) field joint moisture seal; (4) moisture seal Kevlar retaining straps; (5) field joint external insulation; (6) vent valve; (7) power cables; and (8) igniter heater.

Family Systems Theory in the Workplace.

ERIC Educational Resources Information Center

Rogers, Vivian

This paper presents a summary of Murray Brown's family systems theory as it applies to the workplace, lists some indicators of when a system is working well, and cites some other guidelines for gauging and improving one's own functioning in the work system. Major concepts of Bowen's theory include: (1) the family and the workplace are systems; (2)…

Using Movies to Teach Family Systems Concepts.

ERIC Educational Resources Information Center

Hudock, Anthony M., Jr.; Warden, Sherry A. Gallagher

2001-01-01

This article reflects a review of research relevant to family systems training and the use of films in the teaching of family systems theory. Advantages and disadvantages of using movies in an introductory-level graduate family therapy course are discussed. An outline of family therapy training objectives, as well as examples of a movie-based…

Work-family fit: the impact of emergency medical services work on the family system.

PubMed

Roth, Sheila Gillespie; Moore, Crystal Dea

2009-01-01

The stress associated with a career in emergency medical services (EMS) can impact the work-family fit and function of the family system for EMS personnel. Little research has been conducted on how the demands associated with a career in EMS influences family life. Objective. To describe salient EMS work factors that can impact the family system. Twelve family members (11 spouses and one parent) of EMS workers were interviewed using a semistructured qualitative interview guide that explored issues related to their family members' work that could impact the quality of family life. Using a phenomenological approach, transcribed interview data were examined for themes that illuminated factors that influence work-family fit. Data analysis revealed that shift work impacts numerous aspects of family life, including marital and parental roles, leisure and social opportunities, and home schedules and rhythms. Furthermore, families coped with challenges associated with their loved one's EMS work through negotiating role responsibilities, developing their own interests, giving their family member "space," and providing support by listening and helping the EMS worker process his or her reactions to difficult work. In addition, family members reported concern over their EMS worker's physical safety. Implications from the data are discussed vis-a-vis the work-family fit and family systems models. Education, communication, support systems, and individual interests are key ways to promote a healthy work-family fit.

Image-Guided Surgical Robotic System for Percutaneous Reduction of Joint Fractures.

PubMed

Dagnino, Giulio; Georgilas, Ioannis; Morad, Samir; Gibbons, Peter; Tarassoli, Payam; Atkins, Roger; Dogramadzi, Sanja

2017-11-01

Complex joint fractures often require an open surgical procedure, which is associated with extensive soft tissue damages and longer hospitalization and rehabilitation time. Percutaneous techniques can potentially mitigate these risks but their application to joint fractures is limited by the current sub-optimal 2D intra-operative imaging (fluoroscopy) and by the high forces involved in the fragment manipulation (due to the presence of soft tissue, e.g., muscles) which might result in fracture malreduction. Integration of robotic assistance and 3D image guidance can potentially overcome these issues. The authors propose an image-guided surgical robotic system for the percutaneous treatment of knee joint fractures, i.e., the robot-assisted fracture surgery (RAFS) system. It allows simultaneous manipulation of two bone fragments, safer robot-bone fixation system, and a traction performing robotic manipulator. This system has led to a novel clinical workflow and has been tested both in laboratory and in clinically relevant cadaveric trials. The RAFS system was tested on 9 cadaver specimens and was able to reduce 7 out of 9 distal femur fractures (T- and Y-shape 33-C1) with acceptable accuracy (≈1 mm, ≈5°), demonstrating its applicability to fix knee joint fractures. This study paved the way to develop novel technologies for percutaneous treatment of complex fractures including hip, ankle, and shoulder, thus representing a step toward minimally-invasive fracture surgeries.

Bridging the gap from values to actions: a family systems framework for family-centered AAC services.

PubMed

Mandak, Kelsey; O'Neill, Tara; Light, Janice; Fosco, Gregory M

2017-03-01

Despite the growing recognition of the importance of family involvement in augmentative and alternative communication (AAC) intervention, little guidance exists on how professionals can establish successful collaborative relationships with families. In this paper, we discuss family systems theory and ecological systems theory as a framework to guide family-centered AAC practice, review family-focused research in AAC, consider how AAC may impact the family system, and provide examples of the clinical implications of using the proposed family systems framework to improve family-centered AAC practice.

Joint Polar Satellite System (JPSS) Common Ground System (CGS) Current Technical Performance Measures

NASA Astrophysics Data System (ADS)

Cochran, S.; Panas, M.; Jamilkowski, M. L.; Miller, S. W.

2015-12-01

ABSTRACT The National Oceanic and Atmospheric Administration (NOAA) and National Aeronautics and Space Administration (NASA) are jointly acquiring the next-generation civilian weather and environmental satellite system: the Joint Polar Satellite System (JPSS). The Joint Polar Satellite System will replace the afternoon orbit component and ground processing system of the current Polar-orbiting Operational Environmental Satellites (POES) managed by NOAA. The JPSS satellites will carry a suite of sensors designed to collect meteorological, oceanographic, climatological and geophysical observations of the Earth. The ground processing system for JPSS is known as the JPSS Common Ground System (JPSS CGS). Developed and maintained by Raytheon Intelligence, Information and Services (IIS), the CGS is a multi-mission enterprise system serving NOAA, NASA and their national and international partners. The CGS has demonstrated its scalability and flexibility to incorporate multiple missions efficiently and with minimal cost, schedule and risk, while strengthening global partnerships in weather and environmental monitoring. The CGS architecture is being upgraded to Block 2.0 in 2015 to "operationalize" S-NPP, leverage lessons learned to date in multi-mission support, take advantage of more reliable and efficient technologies, and satisfy new requirements and constraints in the continually evolving budgetary environment. To ensure the CGS meets these needs, we have developed 49 Technical Performance Measures (TPMs) across 10 categories, such as data latency, operational availability and scalability. This paper will provide an overview of the CGS Block 2.0 architecture, with particular focus on the 10 TPM categories listed above. We will provide updates on how we ensure the deployed architecture meets these TPMs to satisfy our multi-mission objectives with the deployment of Block 2.0.

Elimination of Childhood Encopresis: A Family Systems Approach.

ERIC Educational Resources Information Center

Wells, Michael E.; Hinkle, J. Scott

1990-01-01

Describes case study in which family systems approach to treating childhood encopresis based on the hypothesis that problematic elements of the family system were contributing to the encopresis. Nuclear family members were included in a family counseling process that used strategic homework, predictions about family behavior, and restructuring…

Field joint protection system rain qualification test report

NASA Technical Reports Server (NTRS)

Cook, M.

1989-01-01

This report documents the procedures, performance, and results obtained from the Field Joint Protection System (FJPS) rain test. This test was performed to validate that the flight configuration FJPS prevents the accumulation of moisture in the redesigned solid rocket motor (RSRM) field joints when subjected to simulated prelaunch natural rain environments. The FJPS test article was exposed to rain simulation for approximately 50 minutes. During the test, water entered through the open upper end of the systems tunnel and was funneled down between the tunnel and case. A sealant void at the moisture seal butt splice allowed this water to flow underneath the FJPS. The most likely cause of voids was improper bondline preparation, particularly on the moisture seal surface. In total, water penetrated underneath approximately 60 percent of the FJPS circumference. Because the test article was substantially different from flight configuration (no systems tunnel closeout), results of this test will not affect current flight motors. Due to the omission of systems tunnel covers and systems tunnel floor plate closeout, the test assembly was not representative of flight hardware and resulted in a gross overtest. It is therefore recommended that the test be declared void. It is also recommended that the test be repeated with a complete closeout of the systems tunnel, sealed systems tunnel ends, and improved adhesive bondline preparation.

Family Self-tailoring: Applying a Systems Approach to Improving Family Healthy Living Behaviors

PubMed Central

Moore, Shirley M.; Jones, Lenette; Alemi, Farrokh

2016-01-01

The adoption and maintenance of healthy living behaviors by individuals and families is a major challenge. We describe a new model of health behavior change, SystemCHANGE™ (SC), which focuses on the redesign of family daily routines using system improvement methods. In the SC intervention families are taught a set of skills to engage in a series of small, family self-designed experiments to test ideas to change their daily routines. The family system-oriented changes brought about by these experiments build healthy living behaviors into family daily routines so that these new behaviors happen as a matter of course, despite wavering motivation, willpower or personal effort on the part of individuals. Case stories of the use of SC to improve family healthy living behaviors are provided. Results of several pilot tests of SC indicate its potential effectiveness to change health living behaviors across numerous populations. PMID:27301950

Distributed computer system enhances productivity for SRB joint optimization

NASA Technical Reports Server (NTRS)

Rogers, James L., Jr.; Young, Katherine C.; Barthelemy, Jean-Francois M.

1987-01-01

Initial calculations of a redesign of the solid rocket booster joint that failed during the shuttle tragedy showed that the design had a weight penalty associated with it. Optimization techniques were to be applied to determine if there was any way to reduce the weight while keeping the joint opening closed and limiting the stresses. To allow engineers to examine as many alternatives as possible, a system was developed consisting of existing software that coupled structural analysis with optimization which would execute on a network of computer workstations. To increase turnaround, this system took advantage of the parallelism offered by the finite difference technique of computing gradients to allow several workstations to contribute to the solution of the problem simultaneously. The resulting system reduced the amount of time to complete one optimization cycle from two hours to one-half hour with a potential of reducing it to 15 minutes. The current distributed system, which contains numerous extensions, requires one hour turnaround per optimization cycle. This would take four hours for the sequential system.

Double-button Fixation System for Management of Acute Acromioclavicular Joint Dislocation

PubMed Central

Torkaman, Ali; Bagherifard, Abolfazl; Mokhatri, Tahmineh; Haghighi, Mohammad Hossein Shabanpour; Monshizadeh, Siamak; Taraz, Hamid; Hasanvand, Amin

2016-01-01

Background: Surgical treatments for acromioclavicular (AC) joint dislocation present with some complications. The present study was designed to evaluate the double-button fixation system in the management of acute acromioclavicular joint dislocation. Methods: This cross sectional study, done between February 2011 to June 2014, consisted of 28 patients who underwent surgical management by the double-button fixation system for acute AC joint dislocation. Age, sex, injury mechanism, dominant hand, side with injury, length of follow up, time before surgery, shoulder and hand (DASH), constant and visual analogue scale (VAS) scores, and all complications of the cases during the follow up were recorded. Results: The mean age of patients was 33.23±6.7 years. Twenty four patients (85.71%) were male and four (14.28%) were female. The significant differences were observed between pre-operation VAS, constant shoulder scores and post-operation measurements. There were not any significant differences between right and left coracoclavicular, but two cases of heterotrophic ossifications were recorded. The mean follow-up time was 16.17±4.38 months. Conclusion: According to the results, the double-button fixation system for management of acute acromioclavicular joint dislocation has suitable results and minimal damage to the soft tissues surrounding the coracoclavicular ligaments. PMID:26894217

Space nuclear system expansion joints

NASA Technical Reports Server (NTRS)

Whitaker, W. D.; Shimazki, T. T.

1973-01-01

The engineering, design, and fabrication status of the expansion joint unit (EJU) to be employed in the NaK primary coolant piping loop of the 5-kwe Reactor thermoelectric system are described. Four EJU's are needed in the NaK primary coolant piping loop. The four EJU's which will be identical, utilize bellows as the flexing member, are hermetically sealed, and provide double containment. The bellows are of a nested-formed design, and are to be constructed of 1-ply thickness of 0.010-in. Inconel 718. The EJU's provide a minimum piping load margin of safety of +0.22.

Treating Sibling Incest Using a Family Systems Approach.

ERIC Educational Resources Information Center

Haskins, Cora

2003-01-01

Discusses family systems theory as a framework for understanding the common family dynamics observed in families where there is sibling abuse. Presents a case example using family systems theory as a framework for conceptualizing and developing treatment. (Contains 45 references.) (GCP)

Family self-tailoring: Applying a systems approach to improving family healthy living behaviors.

PubMed

Moore, Shirley M; Jones, Lenette; Alemi, Farrokh

2016-01-01

The adoption and maintenance of healthy living behaviors by individuals and families is a major challenge. We describe a new model of health behavior change, SystemCHANGE (SC), which focuses on the redesign of family daily routines using system improvement methods. In the SC intervention, families are taught a set of skills to engage in a series of small, family self-designed experiments to test ideas to change their daily routines. The family system-oriented changes brought about by these experiments build healthy living behaviors into family daily routines so that these new behaviors happen as a matter of course, despite wavering motivation, willpower, or personal effort on the part of individuals. Case stories of the use of SC to improve family healthy living behaviors are provided. Results of several pilot tests of SC indicate its potential effectiveness to change health living behaviors across numerous populations. Copyright © 2016 Elsevier Inc. All rights reserved.

Design and research on the two-joint mating system of underwater vehicle

NASA Astrophysics Data System (ADS)

Zhang, Zhong-lin; Wang, Li-quan

2013-03-01

In the 21st century, people have come to the era of ocean science and ocean economy. With the development of ocean science and technology and the thorough research on the ocean, underwater mating technique has been widely used in such fields as sunk ship salvage, deep ocean workstation, submarine lifesaving aid and military affairs. In this paper, researches are made home and abroad on mating technology. Two-joint mating system of underwater vehicle is designed including plane system, three-dimensional assembly system and control system in order to increase the capacity of adapting platform obliquity and adopting rotational skirt scheme. It is clear that the system fits the working space of underwater vehicle passageway and there is no interference phenomenon in assembly design. The finite element model of the system shell and the pressurization of the joint are established. The results of the finite element computing and the pressing test are accordant, and thus it can testify that the shell material meet the need of intension and joint pressurization is reliable. Modeling of the control system is accomplished, and simulation and analysis are made, which can provide directions for the controller design of mating system of underwater vehicles.

Flight set 360T004 (STS-30) field joint protection system, volume 7

NASA Technical Reports Server (NTRS)

Hale, Elgie

1989-01-01

The Redesigned Solid Rocket Motors (RSRM) of the Space Transportation System have three field joints that are protected by the Joint Protection Systems (JPS). The igniter heater was mounted on the igniter flange. This report documents the performance of the JPS and igniter heaters on the pad and the post-flight condition of the JPS components. All observations that were written up as Squawks and/or Problem Reports are also discussed. The primary heaters performed satisfactorily and maintained the field joint temperatures within the required temperature range. A secondary heater failed Dielectric Withstanding Voltage (DWV) test during the joint closeout prior to launch. This heater was not used, however, since the primary heater functioned properly. Post-test inspection revealed that pin A of the heater power cable was shorted to the connector shell. Design changes have been implemented to resolve the heater power cable problem. All field joint assemblies met all of the performance requirements.

Development of High Temperature Dissimilar Joint Technology for Fission Surface Power Systems

NASA Technical Reports Server (NTRS)

Locci, Ivan E.; Bowman, Cheryl L.; Gabb, Timothy P.

2009-01-01

NASA is developing fission surface power (FSP) system technology as a potential option for use on the surface of the moon or Mars. The goal is to design a robust system that takes full advantage of existing materials data bases. One of the key components of the power conversion system is the hot-side Heat Exchanger (HX). One possible design for this heat exchanger requires a joint of the dissimilar metals 316L stainless steel and Inconel 718, which must sustain extended operation at high temperatures. This study compares two joining techniques, brazing and diffusion bonding, in the context of forming the requisite stainless steel to superalloy joint. The microstructures produced by brazing and diffusion bonding, the effect of brazing cycle on the mechanical tensile properties of the alloys, and the strength of several brazed joints will be discussed.

Analysis of polyethylene terephthalate PET plastic bottle jointing system using finite element method (FEM)

NASA Astrophysics Data System (ADS)

Zaidi, N. A.; Rosli, Muhamad Farizuan; Effendi, M. S. M.; Abdullah, Mohamad Hariri

2017-09-01

For almost all injection molding applications of Polyethylene Terephthalate (PET) plastic was analyzed the strength, durability and stiffness of properties by using Finite Element Method (FEM) for jointing system of wood furniture. The FEM was utilized for analyzing the PET jointing system for Oak and Pine as wood based material of furniture. The difference pattern design of PET as wood jointing furniture gives the difference value of strength furniture itself. The results show the wood specimen with grooves and eclipse pattern design PET jointing give lower global estimated error is 28.90%, compare to the rectangular and non-grooves wood specimen of global estimated error is 63.21%.

Families in Bollywood cinema: changes and context.

PubMed

Deakin, Nicholas; Bhugra, Dinesh

2012-04-01

With increasing and rapid urbanization and population changes in India, a growing number of people are migrating from rural areas to urban areas, which brings about major changes in support systems. As a result, the portrayal of families has also changed in Hindi cinema over the last 50 years. Recent family melodramas have focused on an idealized version of joint and extended families. In this paper we use some key Hindi films of the 1960s and of the last two decades to compare how films have changed and how, in view of changing audiences, they have created a version of the family which is far from real. Clinicians need to be aware of these changes while dealing with patients and their families (the latter may have unrealistic expectations of their own family members).

[Family-Based Trauma-Focused Cognitive Behavioral Therapy with Three Siblings of a Refugee Family].

PubMed

Bohnacker, Isabelle; Goldbeck, Lutz

2017-10-01

Family-Based Trauma-Focused Cognitive Behavioral Therapy with Three Siblings of a Refugee Family The possibility and relevance of a joint trauma-therapy with siblings has yet received little attention in research and clinical practice. The following case study presents a joint family-based trauma-focused therapy process with a refugee family. All three siblings suffered from post-traumatic stress disorder (PTSD) before treatment. The treatment followed the manual of Trauma Focused Cognitive Behavioral Therapy (TF-CBT; Cohen, Mannarino, Deblinger, 2009). Measures were the short version of the Child and Adolescent Trauma Screen (CATS 7-17), as well as the Teacher's Report Form (TRF). After 18 treatment sessions together with the mother, all three children did no longer meet PTSD criteria. Benefits of the joint therapy were for all three siblings to be sharing and imitating each other's coping strategies. Furthermore, the protective factor of social support after experiencing a traumatic event became evident. The apprehension of the therapist not being sufficiently neutral towards all three siblings was not observed.

Families and the Juvenile Justice System: Considerations for Family-Based Interventions.

PubMed

Amani, Bita; Milburn, Norweeta G; Lopez, Susana; Young-Brinn, Angela; Castro, Lourdes; Lee, Alex; Bath, Eraka

We conducted focus groups with defense lawyers, clinicians, and education advocates to gather their perspectives on families' experiences with the juvenile justice system. Our quantitative descriptive analysis identified a range of themes such as discussions about the poor treatment of families as well as recommendations for a shifting of power to families. These perspectives may provide insights about the context in which families are expected to participate in interventions, meet probationary demands, and provide for their youth's well-being. The results support evidence gathered from families about the impact of youth incarceration on their lives and has implications for practitioners and researchers working with families whose youth have been incarcerated.

Involving Families with Osteogenesis Imperfecta in Health Service Research: Joint Development of the OI/ECE Questionnaire

PubMed Central

Dogba, Maman Joyce; Dahan-Oliel, Noémi; Snider, Laurie; Glorieux, Francis H.; Durigova, Michaela; Palomo, Telma; Cordey, Michel; Bédard, Marie-Hélène; Bedos, Christophe; Rauch, Frank

2016-01-01

This joint development process generated a tool, with good psychometric properties, that provides unique insight into the experiences of patients and families with OI, the psycho-social impact of the illness, and their service needs and expectations. PMID:26799959

Preparing School Counseling Students to Aid Families: Integrating a Family Systems Perspective

ERIC Educational Resources Information Center

Paylo, Matthew John

2011-01-01

In this article, the value of integrating family systems theory into a school counseling curriculum is explored. Some programs have historically placed school counselors in a difficult position by not adequately preparing them for the demands of incorporating family systems and community collaboration into clinical practice. The rationale for…

Evaluation of Asphalt Bridge Deck Joint Systems.

DOT National Transportation Integrated Search

2009-12-01

Asphaltic Plug Joint is an expansion joint that is used for new and rehabilitated bridges. It provides a smooth and watertight surface free of debris; and offers simple, easy and staged construction. Asphaltic plug joint can be repaired segmentally a...

14 CFR 23.693 - Joints.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Systems § 23.693 Joints. Control system joints (in push-pull systems) that are subject to angular motion... factor may be reduced to 2.0 for joints in cable control systems. For ball or roller bearings, the...

Family-focused autism spectrum disorder research: a review of the utility of family systems approaches.

PubMed

Cridland, Elizabeth K; Jones, Sandra C; Magee, Christopher A; Caputi, Peter

2014-04-01

A family member with an autism spectrum disorder presents pervasive and bidirectional influences on the entire family system, suggesting a need for family-focused autism spectrum disorder research. While there has been increasing interest in this research area, family-focused autism spectrum disorder research can still be considered relatively recent, and there are limitations to the existing literature. The purpose of this article is to provide theoretical and methodological directions for future family-focused autism spectrum disorder research. In particular, this article proposes Family Systems approaches as a common theoretical framework for future family-focused autism spectrum disorder research by considering theoretical concepts such as Boundaries, Ambiguous Loss, Resilience and Traumatic Growth. We discuss reasons why these concepts are important to researching families living with autism spectrum disorder and provide recommendations for future research. The potential for research grounded in Family Systems approaches to influence clinical support services is also discussed.

Fully automated system for the quantification of human osteoarthritic knee joint effusion volume using magnetic resonance imaging.

PubMed

Li, Wei; Abram, François; Pelletier, Jean-Pierre; Raynauld, Jean-Pierre; Dorais, Marc; d'Anjou, Marc-André; Martel-Pelletier, Johanne

2010-01-01

Joint effusion is frequently associated with osteoarthritis (OA) flare-up and is an important marker of therapeutic response. This study aimed at developing and validating a fully automated system based on magnetic resonance imaging (MRI) for the quantification of joint effusion volume in knee OA patients. MRI examinations consisted of two axial sequences: a T2-weighted true fast imaging with steady-state precession and a T1-weighted gradient echo. An automated joint effusion volume quantification system using MRI was developed and validated (a) with calibrated phantoms (cylinder and sphere) and effusion from knee OA patients; (b) with assessment by manual quantification; and (c) by direct aspiration. Twenty-five knee OA patients with joint effusion were included in the study. The automated joint effusion volume quantification was developed as a four stage sequencing process: bone segmentation, filtering of unrelated structures, segmentation of joint effusion, and subvoxel volume calculation. Validation experiments revealed excellent coefficients of variation with the calibrated cylinder (1.4%) and sphere (0.8%) phantoms. Comparison of the OA knee joint effusion volume assessed by the developed automated system and by manual quantification was also excellent (r = 0.98; P < 0.0001), as was the comparison with direct aspiration (r = 0.88; P = 0.0008). The newly developed fully automated MRI-based system provided precise quantification of OA knee joint effusion volume with excellent correlation with data from phantoms, a manual system, and joint aspiration. Such an automated system will be instrumental in improving the reproducibility/reliability of the evaluation of this marker in clinical application.

Improved decryption quality and security of a joint transform correlator-based encryption system

NASA Astrophysics Data System (ADS)

Vilardy, Juan M.; Millán, María S.; Pérez-Cabré, Elisabet

2013-02-01

Some image encryption systems based on modified double random phase encoding and joint transform correlator architecture produce low quality decrypted images and are vulnerable to a variety of attacks. In this work, we analyse the algorithm of some reported methods that optically implement the double random phase encryption in a joint transform correlator. We show that it is possible to significantly improve the quality of the decrypted image by introducing a simple nonlinear operation in the encrypted function that contains the joint power spectrum. This nonlinearity also makes the system more resistant to chosen-plaintext attacks. We additionally explore the system resistance against this type of attack when a variety of probability density functions are used to generate the two random phase masks of the encryption-decryption process. Numerical results are presented and discussed.

Analysis of postmarket complaints database for the iFuse SI Joint Fusion System®: a minimally invasive treatment for degenerative sacroiliitis and sacroiliac joint disruption

PubMed Central

Miller, Larry E; Reckling, W Carlton; Block, Jon E

2013-01-01

Background The sacroiliac joint is a common but under-recognized source of low back and gluteal pain. Patients with degenerative sacroiliitis or sacroiliac joint disruption resistant to nonsurgical treatments may undergo open surgery with sacroiliac joint arthrodesis, although outcomes are mixed and risks are significant. Minimally invasive sacroiliac joint arthrodesis was developed to minimize the risk of iatrogenic injury and to improve patient outcomes compared with open surgery. Methods Between April 2009 and January 2013, 5319 patients were treated with the iFuse SI Joint Fusion System® for conditions including sacroiliac joint disruption and degenerative sacroiliitis. A database was prospectively developed to record all complaints reported to the manufacturer in patients treated with the iFuse device. Complaints were collected through spontaneous reporting mechanisms in support of ongoing mandatory postmarket surveillance efforts. Results Complaints were reported in 204 (3.8%) patients treated with the iFuse system. Pain was the most commonly reported clinical complaint (n = 119, 2.2%), with nerve impingement (n = 48, 0.9%) and recurrent sacroiliac joint pain (n = 43, 0.8%) most frequently cited. All other clinical complaints were rare (≤0.2%). Ninety-six revision surgeries were performed in 94 (1.8%) patients at a median follow-up of four (range 0–30) months. Revisions were typically performed in the early postoperative period for treatment of a symptomatic malpositioned implant (n = 46, 0.9%) or to correct an improperly sized implant in an asymptomatic patient (n = 10, 0.2%). Revisions in the late postoperative period were performed to treat symptom recurrence (n = 34, 0.6%) or for continued pain of undetermined etiology (n = 6, 0.1%). Conclusion Analysis of a postmarket product complaints database demonstrates an overall low risk of complaints with the iFuse SI Joint Fusion System in patients with degenerative sacroiliitis or sacroiliac joint

Analysis of postmarket complaints database for the iFuse SI Joint Fusion System®: a minimally invasive treatment for degenerative sacroiliitis and sacroiliac joint disruption.

PubMed

Miller, Larry E; Reckling, W Carlton; Block, Jon E

2013-01-01

The sacroiliac joint is a common but under-recognized source of low back and gluteal pain. Patients with degenerative sacroiliitis or sacroiliac joint disruption resistant to nonsurgical treatments may undergo open surgery with sacroiliac joint arthrodesis, although outcomes are mixed and risks are significant. Minimally invasive sacroiliac joint arthrodesis was developed to minimize the risk of iatrogenic injury and to improve patient outcomes compared with open surgery. Between April 2009 and January 2013, 5319 patients were treated with the iFuse SI Joint Fusion System® for conditions including sacroiliac joint disruption and degenerative sacroiliitis. A database was prospectively developed to record all complaints reported to the manufacturer in patients treated with the iFuse device. Complaints were collected through spontaneous reporting mechanisms in support of ongoing mandatory postmarket surveillance efforts. Complaints were reported in 204 (3.8%) patients treated with the iFuse system. Pain was the most commonly reported clinical complaint (n = 119, 2.2%), with nerve impingement (n = 48, 0.9%) and recurrent sacroiliac joint pain (n = 43, 0.8%) most frequently cited. All other clinical complaints were rare (≤0.2%). Ninety-six revision surgeries were performed in 94 (1.8%) patients at a median follow-up of four (range 0-30) months. Revisions were typically performed in the early postoperative period for treatment of a symptomatic malpositioned implant (n = 46, 0.9%) or to correct an improperly sized implant in an asymptomatic patient (n = 10, 0.2%). Revisions in the late postoperative period were performed to treat symptom recurrence (n = 34, 0.6%) or for continued pain of undetermined etiology (n = 6, 0.1%). Analysis of a postmarket product complaints database demonstrates an overall low risk of complaints with the iFuse SI Joint Fusion System in patients with degenerative sacroiliitis or sacroiliac joint disruption.

A Review of Natural Joint Systems and Numerical Investigation of Bio-Inspired GFRP-to-Steel Joints

PubMed Central

Avgoulas, Evangelos I.; Sutcliffe, Michael P. F.

2016-01-01

There are a great variety of joint types used in nature which can inspire engineering joints. In order to design such biomimetic joints, it is at first important to understand how biological joints work. A comprehensive literature review, considering natural joints from a mechanical point of view, was undertaken. This was used to develop a taxonomy based on the different methods/functions that nature successfully uses to attach dissimilar tissues. One of the key methods that nature uses to join dissimilar materials is a transitional zone of stiffness at the insertion site. This method was used to propose bio-inspired solutions with a transitional zone of stiffness at the joint site for several glass fibre reinforced plastic (GFRP) to steel adhesively bonded joint configurations. The transition zone was used to reduce the material stiffness mismatch of the joint parts. A numerical finite element model was used to identify the optimum variation in material stiffness that minimises potential failure of the joint. The best bio-inspired joints showed a 118% increase of joint strength compared to the standard joints. PMID:28773688

A Review of Natural Joint Systems and Numerical Investigation of Bio-Inspired GFRP-to-Steel Joints.

PubMed

Avgoulas, Evangelos I; Sutcliffe, Michael P F

2016-07-12

There are a great variety of joint types used in nature which can inspire engineering joints. In order to design such biomimetic joints, it is at first important to understand how biological joints work. A comprehensive literature review, considering natural joints from a mechanical point of view, was undertaken. This was used to develop a taxonomy based on the different methods/functions that nature successfully uses to attach dissimilar tissues. One of the key methods that nature uses to join dissimilar materials is a transitional zone of stiffness at the insertion site. This method was used to propose bio-inspired solutions with a transitional zone of stiffness at the joint site for several glass fibre reinforced plastic (GFRP) to steel adhesively bonded joint configurations. The transition zone was used to reduce the material stiffness mismatch of the joint parts. A numerical finite element model was used to identify the optimum variation in material stiffness that minimises potential failure of the joint. The best bio-inspired joints showed a 118% increase of joint strength compared to the standard joints.

Management of Candida guilliermondii joint infection in a dog.

PubMed

Bufalari, Antonello; Maggio, Chiara; Moretti, Giulia; Crovace, Alberto; Stefanetti, Valentina; Straubinger, Reinhard Konrad; Passamonti, Fabrizio

2016-07-08

Candida spp. are dimorphic fungi in the family Cryptococcaceae. Infections with Candida spp. are usually rare conditions in dogs, but immunocompromised patients have a higher risk for developing invasive candidal infections. A 5-year-old male Boxer, positive to Leishmania infantum, was referred to the Veterinary Teaching Hospital of the Department of Veterinary Medicine, University of Perugia, Italy for examination of a non-weight bearing left hind limb lameness of a duration of at least 3 months. During this period, treatment involved systemic anti-inflammatory medications and intra-articular corticosteroid administration. On presentation, clinical examination and radiographic findings were suggestive of cranial cruciate ligament deficiency. To support this diagnosis a stifle arthroscopy was performed: it confirmed a partial rupture of cranial cruciate ligament. Samples culture of synovial fluid and membrane was routinely collected as well, and revealed Candida guilliermondii joint infection. Treatment for the C. guilliermondii joint infection involved systemic anti-fungal therapy, joint lavage and intra-articular administration of antifungal drugs. Lameness improved markedly during this treatment, but lameness did not resolve completely, probably due to cranial cruciate ligament deficiency. Tibial tuberosity advancement (TTA) was chosen in order to treat stifle instability and was performed 4 weeks following cessation of treatment of the C. guilliermondii joint infection. Six month after TTA the dog showed a completely recovery with no lameness. To the authors' knowledge, this is the first case of Candida spp. joint infection reported in dogs. The cause of the progression of the joint C. guilliermondii infection remains unclear but it may be associated with leishmaniasis or intra-articular corticosteroid injections. Treatment with systemic and intra-articular anti-fungal therapies was successful. In the evaluation of hind limb lameness in a chronically

Sacroiliac joint involvement in systemic sclerosis.

PubMed

Arslan Tas, Didem; Yıldız, Fatih; Sakallı, Hakan; Kelle, Bayram; Ballı, Tuğsan; Erken, Eren

2015-01-01

One of the major problems for systemic sclerosis (SSc) patients is suggested to be articular involvement. Mostly involved joints in SSc were reported as wrist, carpometacarpal-interphalangeal, foot, knee, hip and shoulder; however, there has been little knowledge on the sacroiliac joint. Our aim was to evaluate sacroiliac joint involvement in SSc. Fifty-seven SSc patients, 54 rheumatoid arthritis patients and 64 healthy subjects were included. Anteroposterior pelvic radiographs were obtained and graded twice by three blinded rheumatologists. One competent radiologist has re-evaluated the X-ray results. The ASAS (Assessment of Spondylo Arthritis International Society) scoring method was applied for grading sacroiliac involvement. Inflammatory back pain was also evaluated. Other clinical and laboratory data were collected as proposed by the European Study Group. In the SSc group sacroiliitis was found in 13 patients (23%) and was significantly different from RA patients (two patients, 4%), P = 0.003; and the healthy control group (one participant, 2%), P < 0.001. The frequency of inflammatory back pain in SSc patients with sacroiliitis (8/13 patients, 62%) was significantly higher in SSc patients without sacroiliitis (4/44 patients, 9%), P < 0.001. The SSc patients with sacroiliitis and with inflammatory back pain (8/57 patients, 14%) were regarded as axial spondyloarthritis overlap. Male gender, diffuse subtype, inflammatory back pain and high C-reactive protein levels (odds ratio: 1.069, 1.059, 1.059 and 3.698, respectively) were found to be the significant risk factors for sacroiliitis. We suggest that, sacroiliitis may be a concern to be considered in SSc practice. © 2014 Asia Pacific League of Associations for Rheumatology and Wiley Publishing Asia Pty Ltd.

Wartime Stress: Family Adjustment to Loss

DTIC Science & Technology

1981-07-31

effect on family functioning. In R . C . Spaulding (Ed.), Proceedings of the Third Annual Joint Medical Meeting Concerning POW/MIA Matters. San Diego, CA...Military Family Research Conference, Naval Health Research Center, San Diego, CA, September 1977. BROWN, 0., CATALDO, J., DAVISON, R ., & HUYCKE, E ...an overview and assessment. In R . C . Spaulding (Ed.), Proceedings of the Third Annual Joint Medical Meeting Concerning POW/MIA Matters. San Diego, CA

A family systems-based model of organizational intervention.

PubMed

Shumway, Sterling T; Kimball, Thomas G; Korinek, Alan W; Arredondo, Rudy

2007-04-01

Employee assistance professionals are expected to be proficient at intervening in organizations and creating meaningful behavioral change in interpersonal functioning. Because of their training in family systems theories and concepts, marriage and family therapists (MFTs) are well suited to serve organizations as "systems consultants." Unfortunately, the authors were unable to identify any family systems-based models for organizational intervention that have been empirically tested and supported. In this article, the authors present a family systems-based model of intervention that they developed while working in an employee assistance program (EAP). They also present research that was used to refine the model and to provide initial support for its effectiveness.

The Joint Lessons Learned System and Interoperability

DTIC Science & Technology

1989-06-02

Learned: 1988-1989 As mentioned in the introduction to this chaoter, the Organizacion of the JcinC Chiefs cf Staff .OJCS) ueren significant transformatioi...Organization and Functions Manual . Washington, D.C.: HQDA, Office of the Deputy Chief 0f Staff for Operations and Plans, June 1984. ’..S. Army. Concept...U.S. Department of Defense. Joint Universal Lessons Learned System (JULLS) User’s Manual . Orlando, Florida: University of Central Florida, Institute

Fully automated system for the quantification of human osteoarthritic knee joint effusion volume using magnetic resonance imaging

PubMed Central

2010-01-01

Introduction Joint effusion is frequently associated with osteoarthritis (OA) flare-up and is an important marker of therapeutic response. This study aimed at developing and validating a fully automated system based on magnetic resonance imaging (MRI) for the quantification of joint effusion volume in knee OA patients. Methods MRI examinations consisted of two axial sequences: a T2-weighted true fast imaging with steady-state precession and a T1-weighted gradient echo. An automated joint effusion volume quantification system using MRI was developed and validated (a) with calibrated phantoms (cylinder and sphere) and effusion from knee OA patients; (b) with assessment by manual quantification; and (c) by direct aspiration. Twenty-five knee OA patients with joint effusion were included in the study. Results The automated joint effusion volume quantification was developed as a four stage sequencing process: bone segmentation, filtering of unrelated structures, segmentation of joint effusion, and subvoxel volume calculation. Validation experiments revealed excellent coefficients of variation with the calibrated cylinder (1.4%) and sphere (0.8%) phantoms. Comparison of the OA knee joint effusion volume assessed by the developed automated system and by manual quantification was also excellent (r = 0.98; P < 0.0001), as was the comparison with direct aspiration (r = 0.88; P = 0.0008). Conclusions The newly developed fully automated MRI-based system provided precise quantification of OA knee joint effusion volume with excellent correlation with data from phantoms, a manual system, and joint aspiration. Such an automated system will be instrumental in improving the reproducibility/reliability of the evaluation of this marker in clinical application. PMID:20846392

Double density dynamics: realizing a joint distribution of a physical system and a parameter system

NASA Astrophysics Data System (ADS)

Fukuda, Ikuo; Moritsugu, Kei

2015-11-01

To perform a variety of types of molecular dynamics simulations, we created a deterministic method termed ‘double density dynamics’ (DDD), which realizes an arbitrary distribution for both physical variables and their associated parameters simultaneously. Specifically, we constructed an ordinary differential equation that has an invariant density relating to a joint distribution of the physical system and the parameter system. A generalized density function leads to a physical system that develops under nonequilibrium environment-describing superstatistics. The joint distribution density of the physical system and the parameter system appears as the Radon-Nikodym derivative of a distribution that is created by a scaled long-time average, generated from the flow of the differential equation under an ergodic assumption. The general mathematical framework is fully discussed to address the theoretical possibility of our method, and a numerical example representing a 1D harmonic oscillator is provided to validate the method being applied to the temperature parameters.

14 CFR 23.693 - Joints.

Code of Federal Regulations, 2011 CFR

2011-01-01

... STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Design and Construction Control Systems § 23.693 Joints. Control system joints (in push-pull systems) that are subject to angular motion... factor may be reduced to 2.0 for joints in cable control systems. For ball or roller bearings, the...

14 CFR 23.693 - Joints.

Code of Federal Regulations, 2010 CFR

2010-01-01

... STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Design and Construction Control Systems § 23.693 Joints. Control system joints (in push-pull systems) that are subject to angular motion... factor may be reduced to 2.0 for joints in cable control systems. For ball or roller bearings, the...

14 CFR 23.693 - Joints.

Code of Federal Regulations, 2012 CFR

2012-01-01

... STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Design and Construction Control Systems § 23.693 Joints. Control system joints (in push-pull systems) that are subject to angular motion... factor may be reduced to 2.0 for joints in cable control systems. For ball or roller bearings, the...

14 CFR 23.693 - Joints.

Code of Federal Regulations, 2014 CFR

2014-01-01

... STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Design and Construction Control Systems § 23.693 Joints. Control system joints (in push-pull systems) that are subject to angular motion... factor may be reduced to 2.0 for joints in cable control systems. For ball or roller bearings, the...

Joint Symbol Timing and CFO Estimation for OFDM/OQAM Systems in Multipath Channels

NASA Astrophysics Data System (ADS)

Fusco, Tilde; Petrella, Angelo; Tanda, Mario

2009-12-01

The problem of data-aided synchronization for orthogonal frequency division multiplexing (OFDM) systems based on offset quadrature amplitude modulation (OQAM) in multipath channels is considered. In particular, the joint maximum-likelihood (ML) estimator for carrier-frequency offset (CFO), amplitudes, phases, and delays, exploiting a short known preamble, is derived. The ML estimators for phases and amplitudes are in closed form. Moreover, under the assumption that the CFO is sufficiently small, a closed form approximate ML (AML) CFO estimator is obtained. By exploiting the obtained closed form solutions a cost function whose peaks provide an estimate of the delays is derived. In particular, the symbol timing (i.e., the delay of the first multipath component) is obtained by considering the smallest estimated delay. The performance of the proposed joint AML estimator is assessed via computer simulations and compared with that achieved by the joint AML estimator designed for AWGN channel and that achieved by a previously derived joint estimator for OFDM systems.

Prospective relations between family conflict and adolescent maladjustment: security in the family system as a mediating process.

PubMed

Cummings, E Mark; Koss, Kalsea J; Davies, Patrick T

2015-04-01

Conflict in specific family systems (e.g., interparental, parent-child) has been implicated in the development of a host of adjustment problems in adolescence, but little is known about the impact of family conflict involving multiple family systems. Furthermore, questions remain about the effects of family conflict on symptoms of specific disorders and adjustment problems and the processes mediating these effects. The present study prospectively examines the impact of family conflict and emotional security about the family system on adolescent symptoms of specific disorders and adjustment problems, including the development of symptoms of anxiety, depression, conduct problems, and peer problems. Security in the family system was examined as a mediator of these relations. Participants included 295 mother-father-adolescent families (149 girls) participating across three annual time points (grades 7-9). Including auto-regressive controls for initial levels of emotional insecurity and multiple adjustment problems (T1), higher-order emotional insecurity about the family system (T2) mediated relations between T1 family conflict and T3 peer problems, anxiety, and depressive symptoms. Further analyses supported specific patterns of emotional security/insecurity (i.e., security, disengagement, preoccupation) as mediators between family conflict and specific domains of adolescent adjustment. Family conflict was thus found to prospectively predict the development of symptoms of multiple specific adjustment problems, including symptoms of depression, anxiety, conduct problems, and peer problems, by elevating in in adolescent's emotional insecurity about the family system. The clinical implications of these findings are considered.

Wearable Vector Electrical Bioimpedance System to Assess Knee Joint Health

PubMed Central

Hersek, Sinan; Töreyin, Hakan; Teague, Caitlin N.; Millard-Stafford, Mindy L.; Jeong, Hyeon-Ki; Bavare, Miheer M.; Wolkoff, Paul; Sawka, Michael N.; Inan, Omer T.

2017-01-01

Objective We designed and validated a portable electrical bioimpedance (EBI) system to quantify knee joint health. Methods Five separate experiments were performed to demonstrate the: (1) ability of the EBI system to assess knee injury and recovery; (2) inter-day variability of knee EBI measurements; (3) sensitivity of the system to small changes in interstitial fluid volume; (4) reducing the error of EBI measurements using acceleration signals; (5) use of the system with dry electrodes integrated to a wearable knee wrap. Results (1) The absolute difference in resistance (R) and reactance (X) from the left to the right knee was able to distinguish injured and healthy knees (p<0.05); the absolute difference in R decreased significantly (p<0.05) in injured subjects following rehabilitation. (2) The average inter-day variability (standard deviation) of the absolute difference in knee R was 2.5Ω, and for X was, 1.2 Ω. (3) Local heating/cooling resulted in a significant decrease/increase in knee R (p<0.01). (4) The proposed subject position detection algorithm achieved 97.4% leave-one subject out cross-validated accuracy and 98.2% precision in detecting when the subject is in the correct position to take measurements. (5) Linear regression between the knee R and X measured using the wet electrodes and the designed wearable knee wrap were highly correlated (r2 = 0.8 and 0.9, respectively). Conclusion This work demonstrates the use of wearable EBI measurements in monitoring knee joint health. Significance The proposed wearable system has the potential for assessing knee joint health outside the clinic/lab and help guide rehabilitation. PMID:28026745

Wearable Vector Electrical Bioimpedance System to Assess Knee Joint Health.

PubMed

Hersek, Sinan; Toreyin, Hakan; Teague, Caitlin N; Millard-Stafford, Mindy L; Jeong, Hyeon-Ki; Bavare, Miheer M; Wolkoff, Paul; Sawka, Michael N; Inan, Omer T

2017-10-01

We designed and validated a portable electrical bioimpedance (EBI) system to quantify knee joint health. Five separate experiments were performed to demonstrate the: 1) ability of the EBI system to assess knee injury and recovery; 2) interday variability of knee EBI measurements; 3) sensitivity of the system to small changes in interstitial fluid volume; 4) reducing the error of EBI measurements using acceleration signals; and 5) use of the system with dry electrodes integrated to a wearable knee wrap. 1) The absolute difference in resistance ( R) and reactance (X) from the left to the right knee was able to distinguish injured and healthy knees (p < 0.05); the absolute difference in R decreased significantly (p < 0.05) in injured subjects following rehabilitation. 2) The average interday variability (standard deviation) of the absolute difference in knee R was 2.5 Ω and for X was 1.2 Ω. 3) Local heating/cooling resulted in a significant decrease/increase in knee R (p < 0.01). 4) The proposed subject position detection algorithm achieved 97.4% leave-one subject out cross-validated accuracy and 98.2% precision in detecting when the subject is in the correct position to take measurements. 5) Linear regression between the knee R and X measured using the wet electrodes and the designed wearable knee wrap were highly correlated ( R 2 = 0.8 and 0.9, respectively). This study demonstrates the use of wearable EBI measurements in monitoring knee joint health. The proposed wearable system has the potential for assessing knee joint health outside the clinic/lab and help guide rehabilitation.

Capturing the Family Context of Emotion Regulation: A Family Systems Model Comparison Approach

ERIC Educational Resources Information Center

Fosco, Gregory M.; Grych, John H.

2013-01-01

Several dimensions of family functioning are recognized as formative influences on children's emotion regulation. Historically, they have been studied separately, limiting our ability to understand how they function within the family system. The present investigation tested models including family emotional climate, interparental conflict, and…

29 CFR 825.106 - Joint employer coverage.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR OTHER LAWS THE FAMILY AND MEDICAL LEAVE ACT OF 1993 Coverage Under the Family and Medical Leave Act § 825.106 Joint employer... employees; (2) Where one employer acts directly or indirectly in the interest of the other employer in...

29 CFR 825.106 - Joint employer coverage.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR OTHER LAWS THE FAMILY AND MEDICAL LEAVE ACT OF 1993 Coverage Under the Family and Medical Leave Act § 825.106 Joint employer... employees; (2) Where one employer acts directly or indirectly in the interest of the other employer in...

29 CFR 825.106 - Joint employer coverage.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR OTHER LAWS THE FAMILY AND MEDICAL LEAVE ACT OF 1993 Coverage Under the Family and Medical Leave Act § 825.106 Joint employer... employees; (2) Where one employer acts directly or indirectly in the interest of the other employer in...

29 CFR 825.106 - Joint employer coverage.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR OTHER LAWS THE FAMILY AND MEDICAL LEAVE ACT OF 1993 Coverage Under the Family and Medical Leave Act § 825.106 Joint employer... employees; (2) Where one employer acts directly or indirectly in the interest of the other employer in...

The joint impact of cognitive performance in adolescence and familial cognitive aptitude on risk for major psychiatric disorders: a delineation of four potential pathways to illness.

PubMed

Kendler, K S; Ohlsson, H; Keefe, R S E; Sundquist, K; Sundquist, J

2018-04-01

How do joint measures of premorbid cognitive ability and familial cognitive aptitude (FCA) reflect risk for a diversity of psychiatric and substance use disorders? To address this question, we examined, using Cox models, the predictive effects of school achievement (SA) measured at age 16 and FCA-assessed from SA in siblings and cousins, and educational attainment in parents-on risk for 12 major psychiatric syndromes in 1 140 608 Swedes born 1972-1990. Four developmental patterns emerged. In the first, risk was predicted jointly by low levels of SA and high levels of FCA-that is a level of SA lower than would be predicted from the FCA. This pattern was strongest in autism spectrum disorders and schizophrenia, and weakest in bipolar illness. In these disorders, a pathologic process seems to have caused cognitive functioning to fall substantially short of familial potential. In the second pattern, seen in the internalizing conditions of major depression and anxiety disorders, risk was associated with low SA but was unrelated to FCA. Externalizing disorders-drug abuse and alcohol use disorders-demonstrated the third pattern, in which risk was predicted jointly by low SA and low FCA. The fourth pattern, seen in eating disorders, was directly opposite of that observed in externalizing disorders with risk associated with high SA and high FCA. When measured together, adolescent cognitive ability and FCA identified four developmental patterns leading to diverse psychiatric disorders. The value of cognitive assessments in psychiatric research can be substantially increased by also evaluating familial cognitive potential.

An evaluation of bridge deck joint sealing systems in Virginia.

DOT National Transportation Integrated Search

2003-01-01

The design and fabrication of bridge expansion joint (or movement) systems comprise a rapidly evolving industry. New designs are constantly being presented for trial, often on a piecemeal basis. Occasionally, failures of products occur without suffic...

A Patient Record-Filing System for Family Practice

PubMed Central

Levitt, Cheryl

1988-01-01

The efficient storage and easy retrieval of quality records are a central concern of good family practice. Many physicians starting out in practice have difficulty choosing a practical and lasting system for storing their records. Some who have established practices are installing computers in their offices and finding that their filing systems are worn, outdated, and incompatible with computerized systems. This article describes a new filing system installed simultaneously with a new computer system in a family-practice teaching centre. The approach adopted solved all identifiable problems and is applicable in family practices of all sizes.

Prospective Relations between Family Conflict and Adolescent Maladjustment: Security in the Family System as a Mediating Process

PubMed Central

Cummings, E. Mark; Koss, Kalsea J.; Davies, Patrick T.

2018-01-01

Conflict in specific family systems (e.g., interparental, parent-child) has been implicated in the development of a host of adjustment problems in adolescence, but little is known about the impact of family conflict involving multiple family systems. Furthermore, questions remain about the effects of family conflict on symptoms of specific disorders and adjustment problems and the processes mediating these effects. The present study prospectively examines the impact of family conflict and emotional security about the family system on adolescent symptoms of specific disorders and adjustment problems, including the development of symptoms of anxiety, depression, conduct problems, and peer problems. Security in the family system was examined as a mediator of these relations. Participants included 295 mother-father-adolescent families (149 girls) participating across three annual time points (grades 7–9). Including auto-regressive controls for initial levels of emotional insecurity and multiple adjustment problems (T1), higher-order emotional insecurity about the family system (T2) mediated relations between T1 family conflict and T3 peer problems, anxiety, and depressive symptoms. Further analyses supported specific patterns of emotional security/insecurity (i.e., security, disengagement, preoccupation) as mediators between family conflict and specific domains of adolescent adjustment. Family conflict was thus found to prospectively predict the development of symptoms of multiple specific adjustment problems, including symptoms of depression, anxiety, conduct problems, and peer problems, by elevating in in adolescent’s emotional insecurity about the family system. The clinical implications of these findings are considered. PMID:25131144

[THE NEW FAMILY TYPES IN THE HEALTH SYSTEM].

PubMed

Grau Rubio, Claudia; Fernández Hawrylak, María

2015-11-01

Changes in the Spanish families are critical in the planning of health services, in the evolution oftheirdemands, and in their relationships with healthcare staff We describe the characteristics of the new family structures (single-parent families, LGBT families, older families, multiple birth families, stepfamilies, adoptive families and families that resort to assisted reproductive techniques), what are their concerns, their needs and their requirements, and what are the implications for the health system.

Invisible players: a family systems model.

PubMed

Hellstedt, Jon

2005-10-01

This article attempts to demonstrate that the family is a key player in the athlete's development and performance, sometimes invisible, but often all too visible. The practice of clinical sport psychology is enriched by a family-based orientation to the assessment and treatment of athletes. Creating a workable family system is a challenge for parents. They have many difficult decisions to make, and are often without support and direction in making those choices. Sport psychiatrists and psychologists can be helpful to parents as well as athletes by using family-based assessments and treatment interventions that provide education, challenge, and support as they negotiate the tasks and transitions in the family life cycle.

Family Structure and Child Well-Being: Integrating Family Complexity

PubMed Central

Brown, Susan L.; Manning, Wendy D.; Stykes, J. Bart

2014-01-01

Although children’s family lives are diverse, the measurement of children’s living arrangements has lagged, focusing on the relationships of children to parents while largely ignoring sibling composition. Using data from the 2008 Survey of Income and Program Participation (N = 23,985) the authors documented patterns of family complexity among a nationally representative sample of children ages 0–17 living in a range of family structures. They also examined the independent and joint associations of family structure and family complexity on child economic well-being. Family complexity was independently related to economic disadvantage, namely, a lower income-to-needs ratio and a higher likelihood of public assistance receipt. The role of family complexity was partially contingent on family structure, with the positive association between family complexity and receipt of public assistance more pronounced for children in families with 2 married biological parents. This study demonstrates the utility of integrating family structure and family complexity in studies of children’s well-being. PMID:25620810

Changing Families in a Changing Military System.

ERIC Educational Resources Information Center

Hunter, Edna J., Ed.

Recently, the military system has begun to feel the impact of the military family. Whenever sudden dramatic changes or transitions occur, crises may result either for the individual or for the institution. At present both the military system and the military family are in a period of rapid transition. Perhaps one of the most important changes that…

Counseling Families from a Systems Perspective. Highlights: An ERIC/CAPS Digest.

ERIC Educational Resources Information Center

Anderson, Mary

This digest briefly reviews theoretical models for counseling dysfunctional familes, then discusses the use of systems theory in counseling families. It lists the characteristics of a dysfunctional family, explains family systems intervention, discusses the goals of family treatment, and describes several family systems counseling techniques. (NB)

Effect of joint mechanism on vehicle redirectional capability of water-filled road safety barrier systems.

PubMed

Thiyahuddin, M I; Thambiratnam, D P; Gu, Y T

2014-10-01

Portable water-filled barriers (PWFBs) are roadside appurtenances that prevent vehicles from penetrating into temporary construction zones on roadways. PWFBs are required to satisfy the strict regulations for vehicle re-direction in tests. However, many of the current PWFBs fail to re-direct the vehicle at high speeds due to the inability of the joints to provide appropriate stiffness. The joint mechanism hence plays a crucial role in the performance of a PWFB system at high speed impacts. This paper investigates the desired features of the joint mechanism in a PWFB system that can re-direct vehicles at high speeds, while limiting the lateral displacement to acceptable limits. A rectangular "wall" representative of a 30m long barrier system was modeled and a novel method of joining adjacent road barriers was introduced through appropriate pin-joint connections. The impact response of the barrier "wall" and the vehicle was obtained and the results show that a rotational stiffness of 3000kNm/rad at the joints seems to provide the desired features of the PWFB system to re-direct impacting vehicles and restrict the lateral deflection. These research findings will be useful to safety engineers and road barrier designers in developing a new generation of PWFBs for increased road safety. Copyright © 2014 Elsevier Ltd. All rights reserved.

Strength Variation of Parachute Joints

NASA Technical Reports Server (NTRS)

Mollmann, Catherine

2017-01-01

A parachute joint is defined as a location where a component is sewn or connected to another component. During the design and developmental phase of a parachute system, the joints for each structural component are isolated and tested through a process called seam and joint testing. The objective of seam and joint testing is to determine the degradation on a single component due to interaction with other components; this data is then used when calculating the margin of safety for that component. During the engineering developmental phase of CPAS (Capsule Parachute Assembly System), the parachute system for the NASA Orion Crew Module, testing was completed for every joint of the six subsystems: the four parachutes (main, drogue, pilot, and FBCP [forward bay cover parachute]), the retention release bridle, and the retention panels. The number of joint tests for these subsystems totaled 92, which provides a plethora of data and results for further analysis. In this paper, the data and results of these seam and joint tests are examined to determine the effects, if any, of different operators and sewing machines on the strength of parachute joints. Other variables are also studied to determine their effect on joint strength, such as joint complexity, joint strength magnitude, material type, and material construction. Findings reveal that an optimally-run seam and joint test program could result in an increased understanding of the structure of the parachute; this should lead to a parachute built with optimal components, potentially saving system weight and volume.

Joint involvement in systemic lupus erythematosus: From pathogenesis to clinical assessment.

PubMed

Ceccarelli, Fulvia; Perricone, Carlo; Cipriano, Enrica; Massaro, Laura; Natalucci, Francesco; Capalbo, Giuseppe; Leccese, Ilaria; Bogdanos, Dimitrios; Spinelli, Francesca Romana; Alessandri, Cristiano; Valesini, Guido; Conti, Fabrizio

2017-08-01

In the present review, the different phenotypes, clinimetric and imaging tools able to assess joint involvement in patients affected by Systemic Lupus Erythematosus (SLE) have been described and summarized. Furthermore, the current knowledge about the pathogenic mechanism and the potential biomarkers of this feature is reported. A literature search was done in PubMed, accessed via the National Library of Medicine PubMed interface (http://www.ncbi.nlm.nih.gov/pubmed). Firstly, PubMed was searched using the term "systemic lupus erythematosus" OR "lupus" in combination with (AND) "joint" OR "articular".Secondly, the same PubMed research was combined with other terms, such as "pathogenesis" OR "genetic" OR "antibodies" OR "biomarkers" OR "cytokines" OR "imaging" OR "ultrasonography" OR "magnetic resonance" OR "clinimetry". After a stringent selection, we evaluated in the present review 13 papers concerning clinical phenotypes of SLE joint involvement, 14 concerning clinimetric assessment, 20 concerning imaging, and finally, 28 concerning pathogenesis and biomarkers. Further relevant data were obtained from the reference lists of articles returned using these search terms and from authors own experience and knowledge of the literature. Despite the prevalence and severity of SLE joint involvement, more awareness and a deeper evaluation of the clinical heterogeneity of this manifestation are mandatory. Moreover, longitudinal studies are needed to assess the progression of this manifestation and to provide standard definitions and examination/recording protocols. Copyright © 2017 Elsevier Inc. All rights reserved.

Modification of the Grood and Suntay Joint Coordinate System equations for knee joint flexion.

PubMed

Dabirrahmani, Danè; Hogg, Michael

2017-01-01

Since its introduction, the Grood and Suntay Joint Coordinate System (JCS) has been embraced by the International Society of Biomechanics (ISB) and been widely used for biomechanical reporting. There is, however, a limitation in its ability to provide correct flexion values over a wide range of clinically relevant flexion angles. This technical note addresses the limitation of the JCS equations and introduces a new set of equations to overcome this problem. Copyright © 2016 IPEM. Published by Elsevier Ltd. All rights reserved.

Static analysis of large-scale multibody system using joint coordinates and spatial algebra operator.

PubMed

Omar, Mohamed A

2014-01-01

Initial transient oscillations inhibited in the dynamic simulations responses of multibody systems can lead to inaccurate results, unrealistic load prediction, or simulation failure. These transients could result from incompatible initial conditions, initial constraints violation, and inadequate kinematic assembly. Performing static equilibrium analysis before the dynamic simulation can eliminate these transients and lead to stable simulation. Most exiting multibody formulations determine the static equilibrium position by minimizing the system potential energy. This paper presents a new general purpose approach for solving the static equilibrium in large-scale articulated multibody. The proposed approach introduces an energy drainage mechanism based on Baumgarte constraint stabilization approach to determine the static equilibrium position. The spatial algebra operator is used to express the kinematic and dynamic equations of the closed-loop multibody system. The proposed multibody system formulation utilizes the joint coordinates and modal elastic coordinates as the system generalized coordinates. The recursive nonlinear equations of motion are formulated using the Cartesian coordinates and the joint coordinates to form an augmented set of differential algebraic equations. Then system connectivity matrix is derived from the system topological relations and used to project the Cartesian quantities into the joint subspace leading to minimum set of differential equations.

Welding technology transfer task/laser based weld joint tracking system for compressor girth welds

NASA Technical Reports Server (NTRS)

Looney, Alan

1991-01-01

Sensors to control and monitor welding operations are currently being developed at Marshall Space Flight Center. The laser based weld bead profiler/torch rotation sensor was modified to provide a weld joint tracking system for compressor girth welds. The tracking system features a precision laser based vision sensor, automated two-axis machine motion, and an industrial PC controller. The system benefits are elimination of weld repairs caused by joint tracking errors which reduces manufacturing costs and increases production output, simplification of tooling, and free costly manufacturing floor space.

Uniqueness of family therapists as family business systems consultants: a cross-disciplinary investigation.

PubMed

Lee, Jinhee; Danes, Sharon M

2012-06-01

The purpose of this study is to address how the consulting approaches of family therapists working with family businesses differ from those of business consultants. The logic of analytic induction was used to analyze qualitative data from family business consultants with and without training in family therapy. Consultants were asked to respond to two vignettes: one emphasized primarily family system problems, whereas the other emphasized business problems with influencing issues at the family/business intersection. Both similarities and differences were found in reference to problem assessment, consulting goal orientation, intervention strategy focus, consultant role and function, and consulting setting preference between consultants with and without family therapy training. Results indicate that consultants of each discipline provide a unique perspective and expertise that allow them to successfully address the spectrum of issues that family firms face. Further, findings highlight the unique contribution of family therapists to an interdisciplinary consulting team. © 2012 American Association for Marriage and Family Therapy.

Family-Focused Autism Spectrum Disorder Research: A Review of the Utility of Family Systems Approaches

ERIC Educational Resources Information Center

Cridland, Elizabeth K.; Jones, Sandra C.; Magee, Christopher A.; Caputi, Peter

2014-01-01

A family member with an autism spectrum disorder presents pervasive and bidirectional influences on the entire family system, suggesting a need for family-focused autism spectrum disorder research. While there has been increasing interest in this research area, family-focused autism spectrum disorder research can still be considered relatively…

Family Systems Theory: A Unifying Framework for Codependence.

ERIC Educational Resources Information Center

Prest, Layne A.; Protinsky, Howard

1993-01-01

Considers addictions and construct of codependence. Offers critical review and synthesis of codependency literature, along with an intergenerational family systems framework for conceptualizing the relationship of the dysfunctional family to the construct of codependence. Presents theoretical basis for systemic clinical work and research in this…

The Fourth Revolution: Family Systems in the Schools.

ERIC Educational Resources Information Center

Woody, Robert Henley; Woody, Jennifer K.

1994-01-01

Identifies historical roots, public policy evolution, and legislative mandates relevant to schools meeting students' mental health needs and creating a school-family effort. To promote acceptance, the linkage between school systems and family systems theory is explained. Assessment and intervention strategies are described. (JBJ)

An intelligent system with EMG-based joint angle estimation for telemanipulation.

PubMed

Suryanarayanan, S; Reddy, N P; Gupta, V

1996-01-01

Bio-control of telemanipulators is being researched as an alternate control strategy. This study investigates the use of surface EMG from the biceps to predict joint angle during flexion of the arm that can be used to control an anthropomorphic telemanipulator. An intelligent system based on neural networks and fuzzy logic has been developed to use the processed surface EMG signal and predict the joint angle. The system has been tested on various angles of flexion-extension of the arm and at several speeds of flexion-extension. Preliminary results show the RMS error between the predicted angle and the actual angle to be less than 3% during training and less than 15% during testing. The technique of direct bio-control using EMG has the potential as an interface for telemanipulation applications.

Final Environmental Assessment: Solar Panel Systems at Joint Base McGuire-Dix-Lakehurst New Jersey

DTIC Science & Technology

2012-03-01

FINAL ENVIRONMENTAL ASSESSMENT Solar Panel Systems at Joint Base McGuire-Dix-Lakehurst, New Jersey MARCH 2012...Final Environmental Assessment : Solar Panel Systems at Joint Base McGuire-Dix-Lakehurst New Jersey 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM...unclassified Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 Purpose Finding of No Significant Impact (FONSI) Environmental Assessment (EA

Perspectives of family and veterans on family programs to support reintegration of returning veterans with posttraumatic stress disorder.

PubMed

Fischer, Ellen P; Sherman, Michelle D; McSweeney, Jean C; Pyne, Jeffrey M; Owen, Richard R; Dixon, Lisa B

2015-08-01

Combat deployment and reintegration are challenging for service members and their families. Although family involvement in mental health care is increasing in the U.S. Department of Veterans Affairs (VA) system, little is known about family members' preferences for services. This study elicited the perspectives of returning Afghanistan and Iraq war veterans with posttraumatic stress disorder and their families regarding family involvement in veterans' mental health care. Semistructured qualitative interviews were conducted with 47 veterans receiving care for posttraumatic stress disorder at the Central Arkansas Veterans Healthcare System or Oklahoma City VA Medical Center and 36 veteran-designated family members. Interviews addressed perceived needs related to veterans' readjustment to civilian life, interest in family involvement in joint veteran/family programs, and desired family program content. Interview data were analyzed using content analysis and constant comparison. Both groups strongly supported inclusion of family members in programs to facilitate veterans' postdeployment readjustment and reintegration into civilian life. Both desired program content focused on information, practical skills, support, and gaining perspective on the other's experience. Although family and veteran perspectives were similar, family members placed greater emphasis on parenting-related issues and the kinds of support they and their children needed during and after deployment. To our knowledge, this is the first published report on preferences regarding VA postdeployment reintegration support that incorporates the perspectives of returning male and female veterans and those of their families. Findings will help VA and community providers working with returning veterans tailor services to the needs and preferences of this important-to-engage population. (c) 2015 APA, all rights reserved).

Feminist and Family Systems Therapy: Are They Irreconcilable?

ERIC Educational Resources Information Center

Libow, Judith A.; And Others

1982-01-01

Urges more dialog between and integration of feminist and family systems theories in order to expand clinicians' flexibility and effectiveness. Considers points of conceptual and pragmatic convergence as well as divergence between the two perspectives. Highlights issues for development of a structural/strategic family systems model. (RC)

The connection between strong social support and joint replacement outcomes.

PubMed

Theiss, Mark M; Ellison, Michael W; Tea, Christine G; Warner, Julia F; Silver, Renee M; Murphy, Valerie J

2011-05-18

A myriad of emotional, informational, and tangible needs can easily overwhelm patients as they seek to navigate a complicated surgical procedure. This article demonstrates that a dedicated family member or friend supporting their loved one before, during, and after joint replacement surgery measurably impacts quality and outcomes. The multidisciplinary, multihospital study team developed the following Opportunity Statement: "To define, measure, and implement a progressive family/friend support system across the continuum of care promoting optimal patient recovery after total joint arthroplasty." The team used the modified Groningen Orthopedic Social Support Scale to measure levels of social support and associated these levels with other patient outcomes.Analysis of 1722 observations across 4 hospitals found that patients with strong social support have shorter hospital stays, are more likely to be discharged home, to meet ambulation and transfer-out-of-bed targets, and to score hospital quality of care higher, and are more confident and ready to go home on discharge. Three presence intervals were also found to be significant predictors of key outcome measures: family/friend presence during the preoperative classes, in the preoperative holding area, and during the last physical therapy session. These intervals may serve as reasonable social support proxies for organizations desiring to measure social support to ultimately affect quality and outcomes. Copyright 2011, SLACK Incorporated.

Assessing Children's Appraisals of Security in the Family System: The Development of the Security in the Family System (SIFS) Scales

ERIC Educational Resources Information Center

Forman, Evan M.; Davies, Patrick T.

2005-01-01

Background: Although delineating the processes by which children appraise the family as a source of security from their collective experiences in the family subsystem has assumed center stage in many conceptualizations of child development, the dearth of measures of child adaptation in the family system has hindered empirical advances. Therefore,…

Telepsychiatry, the satellite system and family consultation.

PubMed

Paul, N L

1997-01-01

A pilot telepsychiatry session was conducted with the US Department of Defense Satellite Communication System. The subjects were a family incompletely divorced many years before. There were two satellite interviews with this family. Bringing together all members of the original family so that questions could be addressed as to what happened when the children were very young unblocked a 13-year-old communication problem.

Static Analysis of Large-Scale Multibody System Using Joint Coordinates and Spatial Algebra Operator

PubMed Central

Omar, Mohamed A.

2014-01-01

Initial transient oscillations inhibited in the dynamic simulations responses of multibody systems can lead to inaccurate results, unrealistic load prediction, or simulation failure. These transients could result from incompatible initial conditions, initial constraints violation, and inadequate kinematic assembly. Performing static equilibrium analysis before the dynamic simulation can eliminate these transients and lead to stable simulation. Most exiting multibody formulations determine the static equilibrium position by minimizing the system potential energy. This paper presents a new general purpose approach for solving the static equilibrium in large-scale articulated multibody. The proposed approach introduces an energy drainage mechanism based on Baumgarte constraint stabilization approach to determine the static equilibrium position. The spatial algebra operator is used to express the kinematic and dynamic equations of the closed-loop multibody system. The proposed multibody system formulation utilizes the joint coordinates and modal elastic coordinates as the system generalized coordinates. The recursive nonlinear equations of motion are formulated using the Cartesian coordinates and the joint coordinates to form an augmented set of differential algebraic equations. Then system connectivity matrix is derived from the system topological relations and used to project the Cartesian quantities into the joint subspace leading to minimum set of differential equations. PMID:25045732

Full Scale RC Beam-Column Joints Strengthened with Steel Reinforced Polymer Systems

NASA Astrophysics Data System (ADS)

De Vita, Alessandro; Napoli, Annalisa; Realfonzo, Roberto

2017-07-01

This paper presents the results of an experimental campaign performed at the Laboratory of Materials and Structural Testing of the University of Salerno (Italy) in order to investigate the seismic performance of RC beam-column joints strengthened with Steel Reinforced Polymer (SRP) systems. With the aim to represent typical façade frames’ beam-column subassemblies found in existing RC buildings, specimens were provided with two short beam stubs orthogonal to the main beam and were designed with inadequate seismic details. Five members were strengthened by using two different SRP layouts while the remaining ones were used as benchmarks. Once damaged, two specimens were also repaired, retrofitted with SRP and subjected to cyclic test again. The results of cyclic tests performed on SRP strengthened joints are examined through a comparison with the outcomes of the previous experimental program including companion specimens not provided with transverse beam stubs and strengthened by Carbon Fiber Reinforced Polymer (CFRP) systems. In particular, both qualitative and quantitative considerations about the influence of the confining effect provided by the secondary beams on the joint response, the suitability of all the adopted strengthening solutions (SRP/CFRP systems), the performances and the failure modes experienced in the several cases studied are provided.

Internally supported flexible duct joint. [device for conducting fluids in high pressure systems

NASA Technical Reports Server (NTRS)

Kuhn, R. F., Jr. (Inventor)

1975-01-01

An internally supported, flexible duct joint for use in conducting fluids under relatively high pressures in systems where relatively large deflection angles must be accommodated is presented. The joint includes a flexible tubular bellows and an elongated base disposed within the bellows. The base is connected through radiating struts to the bellows near mid-portion and to each of the opposite end portions of the bellows through a pivotal connecting body. A motion-controlling linkage is provided for linking the connecting bodies, whereby angular displacement of the joint is controlled and uniformity in the instantaneous bend radius of the duct is achieved as deflection is imposed.

Joint Polar Satellite System (JPSS) Common Ground System (CGS) Architecture Overview and Technical Performance Measures

NASA Astrophysics Data System (ADS)

Grant, K. D.; Johnson, B. R.; Miller, S. W.; Jamilkowski, M. L.

2014-12-01

The National Oceanic and Atmospheric Administration (NOAA) and National Aeronautics and Space Administration (NASA) are jointly acquiring the next-generation civilian weather and environmental satellite system: the Joint Polar Satellite System (JPSS). The Joint Polar Satellite System will replace the afternoon orbit component and ground processing system of the current Polar-orbiting Operational Environmental Satellites (POES) managed by NOAA. The JPSS satellites will carry a suite of sensors designed to collect meteorological, oceanographic, climatological and geophysical observations of the Earth. The ground processing system for JPSS is known as the JPSS Common Ground System (JPSS CGS). Developed and maintained by Raytheon Intelligence, Information and Services (IIS), the CGS is a multi-mission enterprise system serving NOAA, NASA and their national and international partners. The CGS provides a wide range of support to a number of missions. Originally designed to support S-NPP and JPSS, the CGS has demonstrated its scalability and flexibility to incorporate all of these other important missions efficiently and with minimal cost, schedule and risk, while strengthening global partnerships in weather and environmental monitoring. The CGS architecture will be upgraded to Block 2.0 in 2015 to satisfy several key objectives, including: "operationalizing" S-NPP, which had originally been intended as a risk reduction mission; leveraging lessons learned to date in multi-mission support; taking advantage of newer, more reliable and efficient technologies; and satisfying new requirements and constraints due to the continually evolving budgetary environment. To ensure the CGS meets these needs, we have developed 48 Technical Performance Measures (TPMs) across 9 categories: Data Availability, Data Latency, Operational Availability, Margin, Scalability, Situational Awareness, Transition (between environments and sites), WAN Efficiency, and Data Recovery Processing. This

Degenerative joint disease: multiple joint involvement in young and mature dogs.

PubMed

Olsewski, J M; Lust, G; Rendano, V T; Summers, B A

1983-07-01

Radiologic, pathologic, and ancillary methods were used to determine the occurrence of degenerative joint disease involving multiple joints of immature and adult dogs. Animals were selected for the development of hip joint dysplasia and chronic degenerative joint disease. Of disease-prone dogs, 82% (45 of 55 dogs) had radiologic changes, indicative of hip dysplasia, by 1 year of age. At necropsy, more abnormal joints were identified than by radiographic examination. Among 92 dogs between 3 to 11 months of age that had joint abnormalities, 71% had hip joint involvement; 38%, shoulder joint involvement; 22%, stifle joint involvement; and 40% had multiple joint involvement. Polyarthritis was asymptomatic and unexpected. Radiographic examination of older dogs also revealed evidence of degenerative joint disease in many joints. Multiple joint involvement was substantiated at necropsy of young and mature dogs. A similar pattern of polyarticular osteoarthritis was revealed in a survey (computer search) of necropsy reports from medical case records of 100 adult and elderly dogs. Usually, the joint disease was an incidental observation, unrelated to the clinical disease or to the cause of death. The frequent occurrence of degenerative changes in several joints of dogs aged 6 months to 17 years indicated that osteoarthritis may be progressive in these joints and raises the possibility that systemic factors are involved in the disease process.

Development Requirements for Spacesuit Elbow Joint

NASA Technical Reports Server (NTRS)

Peters, Benjamin

2017-01-01

Functional Requirements for spacesuit elbow joint:1) The system is a conformal, single-axis spacesuit pressurized joint that encloses the elbow joint of the suited user and uses a defined interface to connect to the suit systems on either side of the joint.2) The system shall be designed to bear the loads incurred from the internal pressure of the system, as well as the expected loads induced by the user while enabling the user move the joint through the required range of motion. The joint torque of the system experienced by the user shall remain at or below the required specification for the entire range of motion.3) The design shall be constructed, at a minimum, as a two-layer system. The internal, air-tight layer shall be referred to as the bladder, and the layer on the unpressurized side of the bladder shall be referred to as the restraint. The design of the system may include additional features or layers, such as axial webbing, to meet the overall requirements of the design.

Expansion joint for guideway for magnetic levitation transportation system

DOEpatents

Rossing, Thomas D.

1993-01-01

An expansion joint that allows a guideway of a magnetic levitation transportation system to expand and contract while minimizing transients occurring in the magnetic lift and drag forces acting on a magnetic levitation vehicle traveling over the joint includes an upper cut or recess extending downwardly from the upper surface of the guideway and a non-intersecting lower cut or recess that extends upwardly from the lower surface of the guideway. The sidewalls of the cuts can be parallel to each other and the vertical axis of the guideway; the depth of the lower cut can be greater than the depth of the upper cut; and the overall combined lengths of the cuts can be greater than the thickness of the guideway from the upper to lower surface so that the cuts will overlap, but be spaced apart from each other. The distance between the cuts can be determined on the basis of the force transients and the mechanical behavior of the guideway. A second pair of similarly configured upper and lower cuts may be disposed in the guideway; the expansion joint may consist of two upper cuts and one lower cut; or the cuts may have non-parallel, diverging sidewalls so that the cuts have a substantially dove-tail shape.

Expansion joint for guideway for magnetic levitation transportation system

DOEpatents

Rossing, T.D.

1993-02-09

An expansion joint that allows a guideway of a magnetic levitation transportation system to expand and contract while minimizing transients occurring in the magnetic lift and drag forces acting on a magnetic levitation vehicle traveling over the joint includes an upper cut or recess extending downwardly from the upper surface of the guideway and a non-intersecting lower cut or recess that extends upwardly from the lower surface of the guideway. The side walls of the cuts can be parallel to each other and the vertical axis of the guideway; the depth of the lower cut can be greater than the depth of the upper cut; and the overall combined lengths of the cuts can be greater than the thickness of the guideway from the upper to lower surface so that the cuts will overlap, but be spaced apart from each other. The distance between the cuts can be determined on the basis of the force transients and the mechanical behavior of the guideway. A second pair of similarly configured upper and lower cuts may be disposed in the guideway; the expansion joint may consist of two upper cuts and one lower cut; or the cuts may have non-parallel, diverging side walls so that the cuts have a substantially dove-tail shape.

Joint Instability and Osteoarthritis

PubMed Central

Blalock, Darryl; Miller, Andrew; Tilley, Michael; Wang, Jinxi

2015-01-01

Joint instability creates a clinical and economic burden in the health care system. Injuries and disorders that directly damage the joint structure or lead to joint instability are highly associated with osteoarthritis (OA). Thus, understanding the physiology of joint stability and the mechanisms of joint instability-induced OA is of clinical significance. The first section of this review discusses the structure and function of major joint tissues, including periarticular muscles, which play a significant role in joint stability. Because the knee, ankle, and shoulder joints demonstrate a high incidence of ligament injury and joint instability, the second section summarizes the mechanisms of ligament injury-associated joint instability of these joints. The final section highlights the recent advances in the understanding of the mechanical and biological mechanisms of joint instability-induced OA. These advances may lead to new opportunities for clinical intervention in the prevention and early treatment of OA. PMID:25741184

Joint instability and osteoarthritis.

PubMed

Blalock, Darryl; Miller, Andrew; Tilley, Michael; Wang, Jinxi

2015-01-01

Joint instability creates a clinical and economic burden in the health care system. Injuries and disorders that directly damage the joint structure or lead to joint instability are highly associated with osteoarthritis (OA). Thus, understanding the physiology of joint stability and the mechanisms of joint instability-induced OA is of clinical significance. The first section of this review discusses the structure and function of major joint tissues, including periarticular muscles, which play a significant role in joint stability. Because the knee, ankle, and shoulder joints demonstrate a high incidence of ligament injury and joint instability, the second section summarizes the mechanisms of ligament injury-associated joint instability of these joints. The final section highlights the recent advances in the understanding of the mechanical and biological mechanisms of joint instability-induced OA. These advances may lead to new opportunities for clinical intervention in the prevention and early treatment of OA.

Nervous system excitability and joint stiffness following short-term dynamic ankle immobilization.

PubMed

Stirling, Alyssa M; McBride, Jeffrey M; Merritt, Edward K; Needle, Alan R

2018-01-01

Joint immobilization has been demonstrated to modify neural excitability in subsets of healthy populations, leading to disinhibition of cortical and reflexive pathways. However, these findings may have limited clinical application as most models have investigated casting and rigid immobilization, while many musculoskeletal injuries often utilize dynamic immobilization devices such as boot immobilizers and pneumatic splints that allow for modified ambulation. We therefore aimed to determine the short-term effects of ambulation in ankle immobilization devices on nervous system excitability and stiffness in able-bodied individuals. A repeated-measures design was implemented where 12 healthy individuals were tested for cortical excitability to the ankle musculature using transcranial magnetic stimulation, reflexive excitability using the Hoffmann reflex, and ankle joint stiffness using arthrometry before and after 30min of ambulation with a boot immobilizer, pneumatic leg splint, or barefoot. Motor evoked potential (MEP), cortical silent period (CSP), H max to M max ratio, and ankle joint displacement were extracted as dependent variables. Results indicated that despite the novel motor demands of walking in immobilization devices, no significant changes in cortical excitability (F≥0.335, P≥0.169), reflexive excitability (F≥0.027, P≥0.083), or joint stiffness (F≥0.558, P≥0.169) occurred. These findings indicate that short-term ambulation in dynamic immobilization devices does not modify neural excitability despite forced constraints on the sensorimotor system. We may therefore conclude that modifications to neural excitability in previous immobilization models are mediated by long-term nervous system plasticity rather than acute mechanisms, and there appear to be no robust changes in corticomotor or spinal excitability acutely posed by ambulation with immobilization devices. Copyright © 2017 Elsevier B.V. All rights reserved.

Improvements and Extensions for Joint Polar Satellite System Algorithms

NASA Astrophysics Data System (ADS)

Grant, K. D.

2016-12-01

The National Oceanic and Atmospheric Administration (NOAA) and National Aeronautics and Space Administration (NASA) are jointly acquiring the next-generation civilian weather satellite system: the Joint Polar Satellite System (JPSS). JPSS replaced the afternoon orbit component and ground processing of the old POES system managed by NOAA. JPSS satellites carry sensors designed to collect meteorological, oceanographic, climatological, and solar-geophysical observations of the earth, atmosphere, and space. The ground processing system for JPSS is the Common Ground System (CGS), and provides command, control, and communications (C3), data processing and product delivery. CGS's data processing capability provides environmental data products (Sensor Data Records (SDRs) and Environmental Data Records (EDRs)) to the NOAA Satellite Operations Facility. The first satellite in the JPSS constellation, S-NPP, was launched in October 2011. The second satellite, JPSS-1, is scheduled for launch in January 2017. During a satellite's calibration and validation (Cal/Val) campaign, numerous algorithm updates occur. Changes identified during Cal/Val become available for implementation into the operational system for both S-NPP and JPSS-1. In addition, new capabilities, such as higher spectral and spatial resolution, will be exercised on JPSS-1. This paper will describe changes to current algorithms and products as a result of S-NPP Cal/Val and related initiatives for improved capabilities. Improvements include Cross Track Infrared Sounder high spectral processing, extended spectral and spatial ranges for Ozone Mapping and Profiler Suite ozone Total Column and Nadir Profiles, and updates to Vegetation Index, Snow Cover, Active Fires, Suspended Matter, and Ocean Color. Updates will include Sea Surface Temperature, Cloud Mask, Cloud Properties, and other improvements.

Joint Aspiration (Arthrocentesis)

MedlinePlus

... arthritis, or JRA), systemic lupus erythematosus (SLE), and Lyme disease. Joint aspiration is diagnostic but it also can ... topic for: Parents Kids Teens Evaluate Your Child's Lyme Disease Risk Living With Lupus Bones, Muscles, and Joints ...

Joint Technical Architecture for Robotic Systems (JTARS)-Final Report

NASA Technical Reports Server (NTRS)

Bradley, Arthur T.; Holloway, Sidney E., III

2006-01-01

This document represents the final report for the Joint Technical Architecture for Robotic Systems (JTARS) project, funded by the Office of Exploration as part of the Intramural Call for Proposals of 2005. The project was prematurely terminated, without review, as part of an agency-wide realignment towards the development of a Crew Exploration Vehicle (CEV) and meeting the near-term goals of lunar exploration.

A new three-dimensional, print-on-demand temporomandibular prosthetic total joint replacement system: Preliminary outcomes.

PubMed

Dimitroulis, George; Austin, Stephen; Sin Lee, Peter Vee; Ackland, David

2018-05-16

The aim of this study is to present the preliminary clinical data on the OMX Temporomandibular Joint (TMJ) Prosthetic total joint replacement system. A prospective, cohort, clinical study was undertaken of consecutive adult patients with Category 5 end-stage joint disease who were implanted with the OMX TMJ prosthesis between May 2015 and April 2017. A total of 50 devices were implanted in 38 patients, with 12 patients receiving bilateral prosthetic joints. There were 31 females and 7 males in this cohort, who ranged in age from 20 to 66 years, with a mean of 43.8 years (±14.0 years). Ten of the 50 prosthetic joints (20%) were fully customized, while the remaining were patient matched using virtual planning software. Based on a mean follow-up period of 15.3 months (range 12-24 months) following the TMJ total joint replacement, preliminary results suggest the OMX TMJ prosthesis has made a positive impact on clinical outcomes, with a mean 74.4% reduction in joint pain levels and significant improvements (p < 0.05) in jaw function as measured by the visual analogue scales for mouth opening (30.8%), diet (77.1%), and function (59.2%). No device failures were reported during the study period. This study suggests that the print-on-demand OMX TMJ prosthesis, designed for rapid delivery of both patient-matched and fully customize devices, represents a safe, reliable and versatile implantable joint replacement system for the treatment of category 5 end-stage TMJ disease. Copyright © 2018 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

The Family as a Living Open System: An Emerging Conceptual Framework.

ERIC Educational Resources Information Center

Fawcett, Jacqueline

The conceptual framework of the family presented in this paper views the family as a reality in itself. The four-dimensional energy field that is the family system is a living open system, a dynamic whole engaged in mutual and simultaneous interaction with a four-dimensional energy field that is the environment. The family system is patterned and…

Sliding mode control for a two-joint coupling nonlinear system based on extended state observer.

PubMed

Zhao, Ling; Cheng, Haiyan; Wang, Tao

2018-02-01

A two-joint coupling nonlinear system driven by pneumatic artificial muscles is introduced in this paper. A sliding mode controller with extended state observer is proposed to cope with nonlinearities and disturbances for the two-joint coupling nonlinear system. In addition, convergence of the extended state observer is presented and stability analysis of the closed-loop system is also demonstrated with the sliding mode controller. Lastly, some experiments are carried out to show the reality effectiveness of the proposed method. Copyright © 2018 ISA. Published by Elsevier Ltd. All rights reserved.

Joint physical custody, turning to parents for emotional support, and subjective health: A study of adolescents in Stockholm, Sweden.

PubMed

Låftman, Sara Brolin; Bergström, Malin; Modin, Bitte; Östberg, Viveca

2014-07-01

Among children with separated parents, the arrangement of joint physical custody, i.e. children living equally much in both parents' homes, has increased substantially during the last decades in Sweden. To date, empirical research on the living conditions of this group is limited. This study analyses family type differences in turning to parents for emotional support and in subjective health among adolescents. The focus of the study is adolescents in joint physical custody, who are compared with those living with two original parents in the same household; those living (only) in a single-parent household; and those living (only) in a reconstituted family. The data come from the Stockholm School Survey of 2004, a total population survey of students in grade 9 (15-16 years) in Stockholm (n=8,840). Ordinary least squares (OLS) regressions were conducted. Turning to both parents about problems is most commonly reported by adolescents in intact families, followed by those in joint physical custody. Adolescents in non-traditional family types report worse subjective health than adolescents in intact families, but the difference is smaller for those in joint physical custody than for those living with a single parent. The slightly poorer health of adolescents in joint physical custody than those in intact families is not explained by their lower use of parents as a source of emotional support. The study suggests that joint physical custody is associated with a higher inclination to use parents as a source of emotional support and better subjective health than other post-divorce family types. © 2014 the Nordic Societies of Public Health.

76 FR 54004 - Agency Information Collection (Joint Application for Comprehensive Assistance and Support...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-30

... Application for Comprehensive Assistance and Support Services for Family Caregivers) Activity Under OMB Review... INFORMATION: Title: Joint Application for Comprehensive Assistance and Support Services for Family Caregivers... financial benefits under the Caregiver Program. Individuals designated as primary or secondary family...

"Imagine a clinical world without family systems thinking": Comment.

PubMed

Jacobs, Barry J

2018-06-01

Comments on an editorial by C. T. Fogarty and L. B. Mauksch (see record 2017-56601-001). The editorial discussed collaborative family health care and the importance of family and social context to yield a comprehensive understanding of health. Jacobs agrees that family systemic thinking is an extremely helpful tool for clinicians, even if there's limited data to prove that. But he also thinks that systemic thinking in and of itself doesn't flatten the health care hierarchy and empower family members. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

The diversity of family health: constituent systems and resources.

PubMed

Hopia, Hanna; Paavilainen, Eija; Astedt-Kurki, Päivi

2005-09-01

The purpose of this study was to explore changes in family health associated with child's chronic illness and hospitalization. The aim was to answer the following questions: (i) What kind of changes do families experience when a child in the family is afflicted by a chronic illness; and (ii) What kind of changes do families experience when their child is admitted to hospital? The data were collected in 2002 in interviews with 29 such families whose children were receiving treatment or who had previously received treatment on the paediatric wards of two hospitals in Finland. Data were collected until reaching theoretical saturation, in which no additional data are found. Data analysis was based on the grounded theory method, proceeding to the stage of axial coding. Family health was formed out of two different dimensions: the constituent systems and the resources of family health. The constituent systems describe the impact of the child's chronic illness and period of hospitalization at the level of both individual family members and the family as a whole. These systems were described by five categories: (i) ill child at the centre of family attention, (ii) siblings in a minor role, (iii) the child's illness governs parental well-being, (iv) the roller coaster of the couple relationship and (v) the whole family is ill. The resources promoting and maintaining family health were divided into six different categories: (i) creative and maintaining mental images, (ii) active involvement, (iii) internal coping means, (iv) reinforcement of coping means, (v) awareness and change of values and (vi) social network shares emotional burden and responsibility for care. The results of the study show that family health is highly vulnerable when a child has to be admitted to hospital because of a chronic condition. They should help nursing staff gain a clearer picture of the depth and diversity of family health and support the resources that promote family health. Future research

Joint Precision Approach and Landing System Increment 1A (JPALS Inc 1A)

DTIC Science & Technology

2015-12-01

Selected Acquisition Report (SAR) RCS: DD-A&T(Q&A)823-238 Joint Precision Approach and Landing System Increment 1A (JPALS Inc 1A) As of FY 2017...President’s Budget Defense Acquisition Management Information Retrieval (DAMIR) March 10, 2016 11:30:56 UNCLASSIFIED JPALS Inc 1A December 2015 SAR...Fiscal Year FYDP - Future Years Defense Program ICE - Independent Cost Estimate IOC - Initial Operational Capability Inc - Increment JROC - Joint

A new technique for repair of a dislocated sternoclavicular joint using a sternal tension cable system.

PubMed

Janson, Jacques T; Rossouw, Gawie J

2013-02-01

An unstable anterior or posterior sternoclavicular joint dislocation can cause severe morbidity with poor shoulder movement and strength. These dislocations need to be repaired, which can be challenging. Many different procedures have been described to obtain a stable joint fixation with varying results. We report a new technique for repairing a sternoclavicular joint dislocation by using a figure-of-eight sternal cable system. This procedure is relatively simple and reproducible to create a stable and functional sternoclavicular joint. Copyright © 2013 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

Social-Cultural-Historical Contradictions in an L2 Listening Lesson: A Joint Activity System Analysis

ERIC Educational Resources Information Center

Cross, Jeremy

2011-01-01

Informed and inspired by neo-Vygotskian theory, this article outlines a study exploiting a contemporary conceptualization of Wells's (2002) joint activity system model as an exploratory framework for examining and depicting the social-cultural-historical contradictions in second-language (L2) learners' joint activity. The participants were a pair…

Joint Decision No. KEP-235/MEN 1985 and No. 114/MENKES/SKB/111/1985 and Joint Decision No. KEP-333/MEN/1985 and No. 15/MENKES/SKB/IV/1985, 1985.

PubMed

1988-01-01

Under these Joint Decisions, all industrial establishments employing 300 or more workers are obliged to establish an in-plant health clinic and to provide contraceptive services to eligible worker couples. Under Joint Decree No. KEP.12/MEN/1984 of the Ministry of Manpower, the Indonesian Labor Federation and the Indonesian Employers Association agreed to step up their family planning efforts in the industrial sector with the cooperation of the National Family Planning Coordinating Board. full text

A Family Systems Approach for the Career Counselor.

ERIC Educational Resources Information Center

Zingaro, Joseph C.

1983-01-01

Discusses family influences on vocational development and maturity, and on perceptions of the vocational counseling client. Briefly describes family systems theory and applies it to the career counseling process. (WAS)

Human-animal bonds II: the role of pets in family systems and family therapy.

PubMed

Walsh, Froma

2009-12-01

The vast majority of pet owners regard their companion animals as family members, yet the role of pets in family systems and family therapy has received little attention in research, training, and practice. This article first notes the benefits of family pets and their importance for resilience. It then examines their role in couple and family processes and their involvement in relational dynamics and tensions. Next, it addresses bereavement in the loss of a cherished pet, influences complicating grief, and facilitation of mourning and adaptation. Finally, it explores the ways that clients' pets and the use of therapists' companion animals in animal-assisted therapy can inform and enrich couple and family therapy as valuable resources in healing.

JANNAF 35th Combustion Subcommittee and 17th Propulsion Systems Hazards Subcommittee Meeting: Joint Sessions

NASA Technical Reports Server (NTRS)

Fry, Ronald S. (Editor); Gannaway, Mary T. (Editor); Rognan, Melanie (Editor)

1998-01-01

This publication is a compilation of 15 unclassified/unlimited technical papers presented at the 1998 meeting of the Joint Army-Navy-NASA-Air Force (JANNAF) Combustion Subcommittee (CS) and Propulsion Systems Hazards Subcommittee (PSHS) held jointly with the Airbreathing Propulsion Subcommittee (APS). The meeting was held on 7 - 11 December 1 998 at Raytheon Systems Company and the Marriott Hotel, Tucson, AZ. Topics covered include advanced ingredients and reaction kinetics in solid propellants and experimental diagnostic techniques.

Cooperative Adaptive Output Regulation for Second-Order Nonlinear Multiagent Systems With Jointly Connected Switching Networks.

PubMed

Liu, Wei; Huang, Jie

2018-03-01

This paper studies the cooperative global robust output regulation problem for a class of heterogeneous second-order nonlinear uncertain multiagent systems with jointly connected switching networks. The main contributions consist of the following three aspects. First, we generalize the result of the adaptive distributed observer from undirected jointly connected switching networks to directed jointly connected switching networks. Second, by performing a new coordinate and input transformation, we convert our problem into the cooperative global robust stabilization problem of a more complex augmented system via the distributed internal model principle. Third, we solve the stabilization problem by a distributed state feedback control law. Our result is illustrated by the leader-following consensus problem for a group of Van der Pol oscillators.

Family systems approaches to wife battering: a feminist critique.

PubMed

Bograd, Michele

1984-10-01

It is suggested that, in theory and practice, family systems approaches to wife battering contain biases against women. Following a selective review of family systems literature on wife battering, systemic formulations of husband-to-wife violence are critically examined. Possible contraindications of conjoint therapy with battered women and abusive men are discussed.

Some ways in which neighborhoods, nuclear families, friendship groups, and schools jointly affect changes in early adolescent development.

PubMed

Cook, Thomas D; Herman, Melissa R; Phillips, Meredith; Settersten, Richard A

2002-01-01

This study assessed some ways in which schools, neighborhoods, nuclear families, and friendship groups jointly contribute to positive change during early adolescence. For each context, existing theory was used to develop a multiattribute index that should promote successful development. Descriptive analyses showed that the four resulting context indices were only modestly intercorrelated at the individual student level (N = 12,398), but clustered more tightly at the school and neighborhood levels (N = 23 and 151 respectively). Only for aggregated units did knowing the developmental capacity of any one context strongly predict the corresponding capacity of the other contexts. Analyses also revealed that each context facilitated individual change in a success index that tapped into student academic performance, mental health, and social behavior. However, individual context effects were only modest in size over the 19 months studied and did not vary much by context. The joint influence of all four contexts was cumulatively large, however, and because it was generally additive in form, no constellation of contexts was identified whose total effect reliably surpassed the sum of its individual context main effects. These results suggest that achieving significant population changes in multidimensional student growth during early adolescence most likely requires both theory and interventions that are explicitly pan-contextual.

Joint Precision Approach and Landing System Nunn-McCurdy Breach Root Cause Analysis and Portfolio Assessment Metrics for DoD Weapons Systems. Volume 8

DTIC Science & Technology

2015-01-01

system that would help in adverse weather conditions. U.S. operations in Bosnia, which were run from a relatively austere airfield with limited air... operations beginning in 2013 (CVN21, Joint Strike Fighter, Joint Unmanned Combat Air System ). cAccording to multiple FAA ofcial planning documents...Positioning System Next Generation Operational Control System HMS Handheld, Manpack and Small Form Fit HUD Head up Display IAMD Integrated Air and

Associations between family characteristics and parental empowerment in the family, family service situations and the family service system.

PubMed

Vuorenmaa, M; Perälä, M-L; Halme, N; Kaunonen, M; Åstedt-Kurki, P

2016-01-01

Parental empowerment signifies parents' sense of confidence in managing their children, interacting with services that their children use and improving child care services. High empowerment is associated with parents' resilience to demands and their confidence to make decisions and take actions that positively affect their families. Most families with children access various healthcare and education services. Professionals working in these services are therefore ideally placed to reinforce parental empowerment. However, little is known about the characteristics associated with parental empowerment within a generic sample of parents or in the context of basic child care services. The aim of this study was to assess how family characteristics are associated with maternal and paternal empowerment in the family, in service situations and in the service system. Parental empowerment was measured among 955 parents (mothers = 571; fathers = 384) of children aged 0-9 years using the Generic Family Empowerment Scale. Family characteristics were assessed through questions on children, parents and the life situation. Associations between empowerment and family characteristics were evaluated using one-way analysis of variance and t-test. Parental empowerment was predicted by multiple linear regression analysis. Parents' concerns related to their parenting, such as whether they possessed sufficient skills as a parent or losing their temper with children, as well as experiences of stress in everyday life, were negatively associated with all dimensions of maternal and paternal empowerment. Both determinants were more common and more significant in empowerment than child-related problems. Promoting parental self-confidence and providing appropriate emotional and concrete support for everyday functioning may reinforce parental empowerment, thereby enhancing families' well-being and coping, as well as improving their access to required services and timely support. Finally

Using a family systems approach to investigate cancer risk communication within melanoma families.

PubMed

Harris, Julie N; Hay, Jennifer; Kuniyuki, Alan; Asgari, Maryam M; Press, Nancy; Bowen, Deborah J

2010-10-01

The family provides an important communication nexus for information and support exchange about family cancer history, and adoption of family-wide cancer risk reduction strategies. The goals of this study were to (1) use the family systems theory to identify characteristics of this sample of families at increased risk of developing melanoma and (2) to relate familial characteristics to the frequency and style of familial risk communication. Participants were first-degree relatives (n=313) of melanoma patients, recruited into a family web-based intervention study. We used multivariable logistic regression models to analyze the association between family functioning and family communication. Most participants were female (60%), with an average age of 51 years. Fifty percent of participants reported that they spoke to their relatives about melanoma risk and people were more likely to speak to their female family members. Familial adaptation, cohesion, coping, and health beliefs were strongly associated with an open style of risk communication within families. None were associated with a blocked style of risk communication. Only cohesion and adaptation were associated with the amount of risk communication that occurred within families. Overall, individuals who came from families that were more highly cohesive, adaptable, and shared strong beliefs about melanoma risk were more likely to communicate openly about melanoma. The fact that this association was not consistent across blocked communication and communication frequency highlights the multifaceted nature of this process. Future research should focus on the interplay between different facets of communication. Copyright © 2010 John Wiley & Sons, Ltd.

Affirmative Action Implications for Worldwide Family Systems.

ERIC Educational Resources Information Center

Liss, Lora

This paper views the interrelatedness of political, economic, and family systems as they are being affected by the growing awareness of sex discrimination. The reduction in sex inequalities throughout the world, regardless of political or economic orientation, will necessitate a new perception of the woman's role in the family unit. The hypothesis…

Joint Polar Satellite System (JPSS) Common Ground System (CGS) Block 3.0 Communications Strategies

NASA Astrophysics Data System (ADS)

Miller, S. W.; Grant, K. D.; Ottinger, K.

2015-12-01

The National Oceanic and Atmospheric Administration (NOAA) and National Aeronautics and Space Administration (NASA) are jointly acquiring the next-generation civilian weather and environmental satellite system: the Joint Polar Satellite System (JPSS). The JPSS program is the follow-on for both space and ground systems to the Polar-orbiting Operational Environmental Satellites (POES) managed by NOAA. The JPSS satellites will carry a suite of sensors designed to collect meteorological, oceanographic, climatological and geophysical observations of the Earth. The ground processing system for JPSS is known as the JPSS Common Ground System (JPSS CGS). Developed and maintained by Raytheon Intelligence, Information and Services (IIS), the CGS is a globally distributed, multi-mission system serving NOAA, NASA and their national and international partners. The CGS has demonstrated its scalability and flexibility to incorporate multiple missions efficiently and with minimal cost, schedule and risk, while strengthening global partnerships in weather and environmental monitoring. In a highly successful international partnership between NOAA and the European Organisation for the Exploitation of Meteorological Satellites (EUMETSAT), the CGS currently provides data routing from McMurdo Station in Antarctica to the EUMETSAT processing center in Darmstadt, Germany. Continuing and building upon that partnership, NOAA and EUMETSAT are collaborating on the development of a new path forward for the 2020's. One approach being explored is a concept of operations where each organization shares satellite downlink resources with the other. This paper will describe that approach, as well as modeling results that demonstrate its feasibility and expected performance.

Determination of Parachute Joint Factors using Seam and Joint Testing

NASA Technical Reports Server (NTRS)

Mollmann, Catherine

2015-01-01

This paper details the methodology for determining the joint factor for all parachute components. This method has been successfully implemented on the Capsule Parachute Assembly System (CPAS) for the NASA Orion crew module for use in determining the margin of safety for each component under peak loads. Also discussed are concepts behind the joint factor and what drives the loss of material strength at joints. The joint factor is defined as a "loss in joint strength...relative to the basic material strength" that occurs when "textiles are connected to each other or to metals." During the CPAS engineering development phase, a conservative joint factor of 0.80 was assumed for each parachute component. In order to refine this factor and eliminate excess conservatism, a seam and joint testing program was implemented as part of the structural validation. This method split each of the parachute structural joints into discrete tensile tests designed to duplicate the loading of each joint. Breaking strength data collected from destructive pull testing was then used to calculate the joint factor in the form of an efficiency. Joint efficiency is the percentage of the base material strength that remains after degradation due to sewing or interaction with other components; it is used interchangeably with joint factor in this paper. Parachute materials vary in type-mainly cord, tape, webbing, and cloth -which require different test fixtures and joint sample construction methods. This paper defines guidelines for designing and testing samples based on materials and test goals. Using the test methodology and analysis approach detailed in this paper, the minimum joint factor for each parachute component can be formulated. The joint factors can then be used to calculate the design factor and margin of safety for that component, a critical part of the design verification process.

High Temperature Stability of Dissimilar Metal Joints in Fission Surface Power Systems

NASA Technical Reports Server (NTRS)

Locci, Ivan E.; Nesbitt, James A.; Ritzert, Frank J.; Bowman, Cheryl L.

2007-01-01

Future generations of power systems for spacecraft and lunar surface systems will likely require a strong dependence on nuclear power. The design of a space nuclear power plant involves integrating together major subsystems with varying materia1 requirements. Refractory alloys are repeatedly considered for major structural components in space power reactor designs because refractory alloys retain their strength at higher temperatures than other classes of metals. The relatively higher mass and lower ductility of the refractory alloys make them less attractive for lower temperature subsystems in the power plant such as the power conversion system. The power conversion system would consist more likely of intermediate temperature Ni-based superalloys. One of many unanswered questions about the use of refractory alloys in a space power plant is how to transition from the use of the structural refractory alloy to more traditional structural alloys. Because deleterious phases can form when complex alloys are joined and operated at elevated temperatures, dissimilar material diffusion analyses of refractory alloys and superalloys are needed to inform designers about options of joint temperature and operational lifetime. Combinations of four superalloys and six refractory alloys were bonded and annealed at 1150 K and 1300 K to examine diffusional interactions in this study. Joints formed through hot pressing and hot isostatic pressing were compared. Results on newer alloys compared favorably to historical data. Diffusional stability is promising for some combinations of Mo-Re alloys and superalloys at 1150 K, but it appears that lower joint temperatures would be required for other refractory alloy couples.

A joint encryption/watermarking system for verifying the reliability of medical images.

PubMed

Bouslimi, Dalel; Coatrieux, Gouenou; Cozic, Michel; Roux, Christian

2012-09-01

In this paper, we propose a joint encryption/water-marking system for the purpose of protecting medical images. This system is based on an approach which combines a substitutive watermarking algorithm, the quantization index modulation, with an encryption algorithm: a stream cipher algorithm (e.g., the RC4) or a block cipher algorithm (e.g., the AES in cipher block chaining (CBC) mode of operation). Our objective is to give access to the outcomes of the image integrity and of its origin even though the image is stored encrypted. If watermarking and encryption are conducted jointly at the protection stage, watermark extraction and decryption can be applied independently. The security analysis of our scheme and experimental results achieved on 8-bit depth ultrasound images as well as on 16-bit encoded positron emission tomography images demonstrate the capability of our system to securely make available security attributes in both spatial and encrypted domains while minimizing image distortion. Furthermore, by making use of the AES block cipher in CBC mode, the proposed system is compliant with or transparent to the DICOM standard.

Linkage analyses in Caribbean Hispanic families identify novel loci associated with familial late-onset Alzheimer's disease.

PubMed

Barral, Sandra; Cheng, Rong; Reitz, Christiane; Vardarajan, Badri; Lee, Joseph; Kunkle, Brian; Beecham, Gary; Cantwell, Laura S; Pericak-Vance, Margaret A; Farrer, Lindsay A; Haines, Jonathan L; Goate, Alison M; Foroud, Tatiana; Boerwinkle, Eric; Schellenberg, Gerard D; Mayeux, Richard

2015-12-01

We performed linkage analyses in Caribbean Hispanic families with multiple late-onset Alzheimer's disease (LOAD) cases to identify regions that may contain disease causative variants. We selected 67 LOAD families to perform genome-wide linkage scan. Analysis of the linked regions was repeated using the entire sample of 282 families. Validated chromosomal regions were analyzed using joint linkage and association. We identified 26 regions linked to LOAD (HLOD ≥3.6). We validated 13 of the regions (HLOD ≥2.5) using the entire family sample. The strongest signal was at 11q12.3 (rs2232932: HLODmax = 4.7, Pjoint = 6.6 × 10(-6)), a locus located ∼2 Mb upstream of the membrane-spanning 4A gene cluster. We additionally identified a locus at 7p14.3 (rs10255835: HLODmax = 4.9, Pjoint = 1.2 × 10(-5)), a region harboring genes associated with the nervous system (GARS, GHRHR, and NEUROD6). Future sequencing efforts should focus on these regions because they may harbor familial LOAD causative mutations. Copyright © 2015 The Alzheimer's Association. Published by Elsevier Inc. All rights reserved.

Cost-Effective Mobile-Based Healthcare System for Managing Total Joint Arthroplasty Follow-Up.

PubMed

Bitsaki, Marina; Koutras, George; Heep, Hansjoerg; Koutras, Christos

2017-01-01

Long-term follow-up care after total joint arthroplasty is essential to evaluate hip and knee arthroplasty outcomes, to provide information to physicians and improve arthroplasty performance, and to improve patients' health condition. In this paper, we aim to improve the communication between arthroplasty patients and physicians and to reduce the cost of follow-up controls based on mobile application technologies and cloud computing. We propose a mobile-based healthcare system that provides cost-effective follow-up controls for primary arthroplasty patients through questions about symptoms in the replaced joint, questionnaires (WOMAC and SF-36v2) and the radiological examination of knee or hip joint. We also perform a cost analysis for a set of 423 patients that were treated in the University Clinic for Orthopedics in Essen-Werden. The estimation of healthcare costs shows significant cost savings (a reduction of 63.67% for readmission rate 5%) in both the University Clinic for Orthopedics in Essen-Werden and the state of North Rhine-Westphalia when the mobile-based healthcare system is applied. We propose a mHealth system to reduce the cost of follow-up assessments of arthroplasty patients through evaluation of diagnosis, self-monitoring, and regular review of their health status.

Towards an Analytical Framework for Understanding the Development of a Quality Assurance System in an International Joint Programme

ERIC Educational Resources Information Center

Zheng, Gaoming; Cai, Yuzhuo; Ma, Shaozhuang

2017-01-01

This paper intends to construct an analytical framework for understanding quality assurance in international joint programmes and to test it in a case analysis of a European--Chinese joint doctoral degree programme. The development of a quality assurance system for an international joint programme is understood as an institutionalization process…

[Drawings and art work in systemic family therapy].

PubMed

Retzlaff, Rüdiger

2005-01-01

As in most other forms of psychotherapy, creative media are an essential ingredient of systemic therapy with children, adolescents and their families. Therapists cannot rely solely on verbal interventions but rather have to utilize the natural tendency of children to express themselves through drawings and art. The therapeutic functions of creative expression in systemic therapy are being discussed. An overview of a variety of techniques with case examples is given that illustrates the many forms and uses of creative techniques in systemic family therapy.

Development and Applications of a Self-Contained, Non-Invasive EVA Joint Angle and Muscle Fatigue Sensor System

NASA Technical Reports Server (NTRS)

Ranniger, C. U.; Sorenson, E. A.; Akin, D. L.

1995-01-01

The University of Maryland Space Systems Laboratory, as a participant in NASA's INSTEP program, is developing a non-invasive, self-contained sensor system which can provide quantitative measurements of joint angles and muscle fatigue in the hand and forearm. The goal of this project is to develop a system with which hand/forearm motion and fatigue metrics can be determined in various terrestrial and zero-G work environments. A preliminary study of the prototype sensor systems and data reduction techniques for the fatigue measurement system are presented. The sensor systems evaluated include fiberoptics, used to measure joint angle, surface electrodes, which measure the electrical signals created in muscle as it contracts; microphones, which measure the noise made by contracting muscle; and accelerometers, which measure the lateral muscle acceleration during contraction. The prototype sensor systems were used to monitor joint motion of the metacarpophalangeal joint and muscle fatigue in flexor digitorum superficialis and flexor carpi ulnaris in subjects performing gripping tasks. Subjects were asked to sustain a 60-second constant-contraction (isometric) exercise and subsequently to perform a repetitive handgripping task to failure. Comparison of the electrical and mechanical signals of the muscles during the different tasks will be used to evaluate the applicability of muscle signal measurement techniques developed for isometric contraction tasks to fatigue prediction in quasi-dynamic exercises. Potential data reduction schemes are presented.

Assessment of the Accounting and Joint Accounting/Computer Information Systems Programs.

ERIC Educational Resources Information Center

Appiah, John; Cernigliaro, James; Davis, Jeffrey; Gordon, Millicent; Richards, Yves; Santamaria, Fernando; Siegel, Annette; Lytle, Namy; Wharton, Patrick

This document presents City University of New York LaGuardia Community College's Department of Accounting and Managerial Studies assessment of its accounting and joint accounting/computer information systems programs report, and includes the following items: (1) description of the mission and goals of the Department of Accounting and Managerial…

Beyond the Joint: The Role of Central Nervous System Reorganizations in Chronic Musculoskeletal Disorders.

PubMed

Roy, Jean-Sébastien; Bouyer, Laurent J; Langevin, Pierre; Mercier, Catherine

2017-11-01

To a large extent, management of musculoskeletal disorders has traditionally focused on structural dysfunctions found within the musculoskeletal system, mainly around the affected joint. While a structural-dysfunction approach may be effective for musculoskeletal conditions in some populations, especially in acute presentations, its effectiveness remains limited in patients with recurrent or chronic musculoskeletal pain. Numerous studies have shown that the human central nervous system can undergo plastic reorganizations following musculoskeletal disorders; however, they can be maladaptive and contribute to altered joint control and chronic pain. In this Viewpoint, the authors argue that to improve rehabilitation outcomes in patients with chronic musculoskeletal pain, a global view of the disorder that incorporates both central (neural) and peripheral (joint-level) changes is needed. The authors also discuss the challenge of evaluating and rehabilitating central changes and the need for large, high-level studies to evaluate approaches incorporating central and peripheral changes and emerging therapies. J Orthop Sports Phys Ther 2017;47(11):817-821. doi:10.2519/jospt.2017.0608.

Examining pedagogical practices in family systems nursing: intentionality, complexity, and doing well by families.

PubMed

Moules, Nancy J; Bell, Janice M; Paton, Brenda I; Morck, Angela C

2012-05-01

Teaching graduate family nursing students the important and delicate practice of entering into and mitigating families' illness suffering signifies an educational practice that is rigorous, intense, and contextual, yet not articulated as expounded knowledge. This study examined the pedagogical practices of the advanced practice of Family Systems Nursing (FSN) as taught to master's and doctoral nursing students at the Family Nursing Unit, University of Calgary, using observation of expert and novice clinical practice, live supervision, videotape review, presession hypothesizing, clinical documentation, and the writing of therapeutic letters to families. A triangulation of research methods and data collection strategies, interpretive ethnography, autoethnography, and hermeneutics, were used. Students reported an intensity of learning that had both useful and limiting consequences as they developed skills in therapeutic conversations with families experiencing illness. Faculty used an intentional pedagogical process to encourage growth in perceptual, conceptual, and executive knowledge and skills of working with families.

75 FR 6250 - ITS Joint Program Office; Intelligent Transportation Systems Program Advisory Committee; Notice...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-08

... DEPARTMENT OF TRANSPORTATION ITS Joint Program Office; Intelligent Transportation Systems Program... the Intelligent Transportation Systems (ITS) Program Advisory Committee (ITSPAC). The Web conference... Transportation on all matters relating to the study, development, and implementation of intelligent...

Shaping future Naval warfare with unmanned systems, the impact across the fleet, and joint considerations

NASA Astrophysics Data System (ADS)

Hudson, E. C.; Johnson, Gordon; Summey, Delbert C.; Portmann, Helmut H., Jr.

2004-09-01

This paper discusses a comprehensive vision for unmanned systems that will shape the future of Naval Warfare within a larger Joint Force concept, and examines the broad impact that can be anticipated across the Fleet. The vision has been articulated from a Naval perspective in NAVSEA technical report CSS/TR-01/09, Shaping the Future of Naval Warfare with Unmanned Systems, and from a Joint perspective in USJFCOM Rapid Assessment Process (RAP) Report #03-10 (Unmanned Effects (UFX): Taking the Human Out of the Loop). Here, the authors build on this foundation by reviewing the major findings and laying out the roadmap for achieving the vision and truly transforming how we fight wars. The focus is on broad impact across the Fleet - but the implications reach across all Joint forces. The term "Unmanned System" means different things to different people. Most think of vehicles that are remotely teleoperated that perform tasks under remote human control. Actually, unmanned systems are stand-alone systems that can execute missions and tasks without direct physical manned presence under varying levels of human control - from teleoperation to full autonomy. It is important to note that an unmanned system comprises a lot more than just a vehicle - it includes payloads, command and control, and communications and information processing.

Joint Polar Satellite System (JPSS) Common Ground System (CGS) Overview and Architectural Tenets

NASA Astrophysics Data System (ADS)

Miller, S. W.; Grant, K. D.; Jamilkowski, M. L.

2013-12-01

The National Oceanic and Atmospheric Administration (NOAA) and National Aeronautics and Space Administration (NASA) are jointly acquiring the next-generation civilian weather and environmental satellite system: the Joint Polar Satellite System (JPSS). The Joint Polar Satellite System will replace the afternoon orbit component and ground processing system of the current Polar-orbiting Operational Environmental Satellites (POES) managed by NOAA. The JPSS satellites will carry a suite of sensors designed to collect meteorological, oceanographic, climatological and geophysical observations of the Earth. The ground processing system for JPSS is known as the JPSS Common Ground System (JPSS CGS). Developed and maintained by Raytheon Intelligence and Information Systems (IIS), the CGS is a multi-mission enterprise system serving NOAA, NASA and their national and international partners. The CGS provides a wide range of support to a number of missions: 1) Command and control and mission management for the Suomi National Polar Partnership (S-NPP) mission today, expanding this support to the JPSS-1 satellite and the Polar Free Flyer mission in 2017 2) Data acquisition via a Polar Receptor Network (PRN) for S-NPP, the Japan Aerospace Exploration Agency's (JAXA) Global Change Observation Mission - Water (GCOM-W1), POES, and the Defense Meteorological Satellite Program (DMSP) and Coriolis/WindSat for the Department of Defense (DoD) 3) Data routing over a global fiber Wide Area Network (WAN) for S-NPP, JPSS-1, Polar Free Flyer, GCOM-W1, POES, DMSP, Coriolis/WindSat, the NASA Space Communications and Navigation (SCaN, which includes several Earth Observing System [EOS] missions), MetOp for the European Organisation for the Exploitation of Meteorological Satellites (EUMETSAT), and the National Science Foundation (NSF) 4) Environmental data processing and distribution for S-NPP, GCOM-W1 and JPSS-1 The CGS architecture will receive a technology refresh in 2015 to satisfy several key

Marriage and Family Therapy and the Law: Discovering Systemic Common Ground

ERIC Educational Resources Information Center

Richards, Jason C.

2017-01-01

Many important decisions regarding couples and families are made by the legal system. However, this system's adversarial nature often results in relational losses for clients, even when one "wins" a case. Some believe a solution may exist in legally-minded marriage and family therapists, who, as experts in family systems theory, are in a…

The Decision-Making Process for Families Investing in Higher Education: A Family Systems Perspective

ERIC Educational Resources Information Center

McHugh, Erin M.

2017-01-01

When families consider investing in their children's education they must weigh the perceived costs against the potential benefits, which becomes increasingly difficult as the cost of higher education continues to rise. Using a family systems approach, this phenomenological study explored the central research question, "How do families…

A clamping force measurement system for monitoring the condition of bolted joints on railway track joints and points

NASA Astrophysics Data System (ADS)

Tesfa, B.; Horler, G.; Thobiani, F. Al; Gu, F.; Ball, A. D.

2012-05-01

Many industrial structures associated with railway infrastructures rely on a large number of bolted joint connections to ensure safe and reliable operation of the track and trackside furniture. Significant sums of money are spent annually to repair the damage caused by bolt failures and to maintain the integrity of bolted structures. In the UK, Network Rail (the organization responsible for rail network maintenance and safety) conducts corrective and preventive maintenance manually on 26,000 sets of points (each having approximately 30 bolted joints per set), in order to ensure operational success and safety for the travelling public. Such manual maintenance is costly, disruptive, unreliable and prone to human error. The aim of this work is to provide a means of automatically measuring the clamping force of each individual bolted joint, by means of an instrumented washer. This paper describes the development of a sensor means to be used in the washer, which satisfies the following criteria. Sense changes in the clamping force of the joint and report this fact. Provide compatibility with the large dynamic range of clamping force. Satisfy the limitations in terms of physical size. Provide the means to electronically interface with the washer. Provide a means of powering the washer in situ. Provide a solution at an acceptable cost. Specifically the paper focuses on requirements 1, 2 and 3 and presents the results that support further development of the proposed design and the realization of a pre-prototype system. In the paper, various options for the force sensing element (strain gage, capacitor, piezo-resistive) have been compared, using design optimization techniques. As a result of the evaluation, piezo-resistive sensors in concert with a proprietary force attenuation method, have been found to offer the best performance and cost trade-off The performance of the novel clamping force sensor has been evaluated experimentally and the results show that a smart washer

Reduced-rank technique for joint channel estimation in TD-SCDMA systems

NASA Astrophysics Data System (ADS)

Kamil Marzook, Ali; Ismail, Alyani; Mohd Ali, Borhanuddin; Sali, Adawati; Khatun, Sabira

2013-02-01

In time division-synchronous code division multiple access systems, increasing the system capacity by exploiting the inserting of the largest number of users in one time slot (TS) requires adding more estimation processes to estimate the joint channel matrix for the whole system. The increase in the number of channel parameters due the increase in the number of users in one TS directly affects the precision of the estimator's performance. This article presents a novel channel estimation with low complexity, which relies on reducing the rank order of the total channel matrix H. The proposed method exploits the rank deficiency of H to reduce the number of parameters that characterise this matrix. The adopted reduced-rank technique is based on truncated singular value decomposition algorithm. The algorithms for reduced-rank joint channel estimation (JCE) are derived and compared against traditional full-rank JCEs: least squares (LS) or Steiner and enhanced (LS or MMSE) algorithms. Simulation results of the normalised mean square error showed the superiority of reduced-rank estimators. In addition, the channel impulse responses founded by reduced-rank estimator for all active users offers considerable performance improvement over the conventional estimator along the channel window length.

Interactive Influences of Family and School Ecologies on the Depression Status among Children in Marital Immigrant Families

ERIC Educational Resources Information Center

Lin, Fu-Gong; Tung, Ho-Jui; Hsieh, Yu-Hsin; Lin, Jin-Ding

2011-01-01

The incidence of transnational marriage has increased significantly in Taiwan in recent years. Children born in immigrant families are predisposed to acculturation and learning problems. We aimed to determine if the children of marital immigrants are more depressed than children from native families, and examine the individual and joint effects of…

A Model for a Single Unmanned Aircraft Systems (UAS) Program Office Managing Joint ISR Capabilities

DTIC Science & Technology

2017-10-01

reduction in manning from the multiple program office structure to the new single program management model. Additional information regarding this...OFFICE MANAGING JOINT ISR CAPABILITIES by Angela E. Burris A Research Report Submitted to the Faculty In Partial Fulfillment of...research paper is to answer how a single management office could provide greater agility for unmanned aircraft systems (UAS); supporting Joint concepts

Joint image encryption and compression scheme based on a new hyperchaotic system and curvelet transform

NASA Astrophysics Data System (ADS)

Zhang, Miao; Tong, Xiaojun

2017-07-01

This paper proposes a joint image encryption and compression scheme based on a new hyperchaotic system and curvelet transform. A new five-dimensional hyperchaotic system based on the Rabinovich system is presented. By means of the proposed hyperchaotic system, a new pseudorandom key stream generator is constructed. The algorithm adopts diffusion and confusion structure to perform encryption, which is based on the key stream generator and the proposed hyperchaotic system. The key sequence used for image encryption is relation to plain text. By means of the second generation curvelet transform, run-length coding, and Huffman coding, the image data are compressed. The joint operation of compression and encryption in a single process is performed. The security test results indicate the proposed methods have high security and good compression effect.

[Systemic-psychomotoric versus purely verbal systemic counselling in families of children with mental disorders].

PubMed

Richter, Joseph; Siegmund, Anja

2011-01-01

Systemic counselling and therapy are usually verbal interventions. However, communication on an abstract level often exceeds the capabilities of children up to about 12 years, leaving them less involved in the therapeutic process. In contrast, symbolic play has been shown to be an effective tool for psychological formulation and intervention. However, it has not been widely used so far in family therapy. In order to explore this hypothesis a form of systemic family therapy (SB; exclusively verbal) was compared with a new concept called systemic-psychomotor family counselling (PsyFam; based on symbolic play). We found good efficacy of PsyFam, reflected in an average effect size of d = .73 (SB: d = .53), even though statistical significance of the group effect could not be shown due to the small sample size. Systemic-psychomotoric family counselling is a promising new approach worth further research in controlled therapy studies.

Analysis and optimization of the active rigidity joint

NASA Astrophysics Data System (ADS)

Manzo, Justin; Garcia, Ephrahim

2009-12-01

The active rigidity joint is a composite mechanism using shape memory alloy and shape memory polymer to create a passively rigid joint with thermally activated deflection. A new model for the active rigidity joint relaxes constraints of earlier methods and allows for more accurate deflection predictions compared to finite element results. Using an iterative process to determine the strain distribution and deflection, the method demonstrates accurate results for both surface bonded and embedded actuators with and without external loading. Deflection capabilities are explored through simulated annealing heuristic optimization using a variety of cost functions to explore actuator performance. A family of responses presents actuator characteristics in terms of load bearing and deflection capabilities given material and thermal constraints. Optimization greatly expands the available workspace of the active rigidity joint from the initial configuration, demonstrating specific work capabilities comparable to those of muscle tissue.

Development of design and analysis methodology for composite bolted joints

NASA Astrophysics Data System (ADS)

Grant, Peter; Sawicki, Adam

1991-05-01

This paper summarizes work performed to develop composite joint design methodology for use on rotorcraft primary structure, determine joint characteristics which affect joint bearing and bypass strength, and develop analytical methods for predicting the effects of such characteristics in structural joints. Experimental results have shown that bearing-bypass interaction allowables cannot be defined using a single continuous function due to variance of failure modes for different bearing-bypass ratios. Hole wear effects can be significant at moderate stress levels and should be considered in the development of bearing allowables. A computer program has been developed and has successfully predicted bearing-bypass interaction effects for the (0/+/-45/90) family of laminates using filled hole and unnotched test data.

Families with Noncompliant Children: Applications of the Systemic Model.

ERIC Educational Resources Information Center

Neilans, Thomas H.; And Others

This paper describes the application of a systems approach model to assessing families with a labeled noncompliant child. The first section describes and comments on the applied methodology for the model. The second section describes the classification of 61 families containing a child labeled by the family as noncompliant. An analysis of data…

PARTS: Probabilistic Alignment for RNA joinT Secondary structure prediction

PubMed Central

Harmanci, Arif Ozgun; Sharma, Gaurav; Mathews, David H.

2008-01-01

A novel method is presented for joint prediction of alignment and common secondary structures of two RNA sequences. The joint consideration of common secondary structures and alignment is accomplished by structural alignment over a search space defined by the newly introduced motif called matched helical regions. The matched helical region formulation generalizes previously employed constraints for structural alignment and thereby better accommodates the structural variability within RNA families. A probabilistic model based on pseudo free energies obtained from precomputed base pairing and alignment probabilities is utilized for scoring structural alignments. Maximum a posteriori (MAP) common secondary structures, sequence alignment and joint posterior probabilities of base pairing are obtained from the model via a dynamic programming algorithm called PARTS. The advantage of the more general structural alignment of PARTS is seen in secondary structure predictions for the RNase P family. For this family, the PARTS MAP predictions of secondary structures and alignment perform significantly better than prior methods that utilize a more restrictive structural alignment model. For the tRNA and 5S rRNA families, the richer structural alignment model of PARTS does not offer a benefit and the method therefore performs comparably with existing alternatives. For all RNA families studied, the posterior probability estimates obtained from PARTS offer an improvement over posterior probability estimates from a single sequence prediction. When considering the base pairings predicted over a threshold value of confidence, the combination of sensitivity and positive predictive value is superior for PARTS than for the single sequence prediction. PARTS source code is available for download under the GNU public license at http://rna.urmc.rochester.edu. PMID:18304945

Discrimination of portraits using a hybrid parallel joint transform correlator system

NASA Astrophysics Data System (ADS)

Inaba, Rieko; Hashimoto, Asako; Kodate, Kashiko

1999-05-01

A hybrid parallel joint transform correlation system is demonstrated through the introduction of a five-channel binary zone plate array and is applied to the discrimination of portraits for a presumed criminal investigation. In order to improve performance, we adopt pe-processing of images with white area of 20%. Furthermore, we discuss the robustness.

Space Station alpha joint bearing

NASA Technical Reports Server (NTRS)

Everman, Michael R.; Jones, P. Alan; Spencer, Porter A.

1987-01-01

Perhaps the most critical structural system aboard the Space Station is the Solar Alpha Rotary Joint which helps align the power generation system with the sun. The joint must provide structural support and controlled rotation to the outboard transverse booms as well as power and data transfer across the joint. The Solar Alpha Rotary Joint is composed of two transition sections and an integral, large diameter bearing. Alpha joint bearing design presents a particularly interesting problem because of its large size and need for high reliability, stiffness, and on orbit maintability. The discrete roller bearing developed is a novel refinement to cam follower technology. It offers thermal compensation and ease of on-orbit maintenance that are not found in conventional rolling element bearings. How the bearing design evolved is summarized. Driving requirements are reviewed, alternative concepts assessed, and the selected design is described.

Proposal for research and education: joint lectures and practicals on central nervous system anatomy and physiology.

PubMed

Kageyama, Ikuo; Yoshimura, Ken; Satoh, Yoshihide; Nanayakkara, Chinthani D; Pallegama, Ranjith W; Iwasaki, Shin-Ichi

2016-07-01

We coordinated anatomy and physiology lectures and practicals to facilitate an integrated understanding of morphology and function in a basic medical science program for dental students and to reduce the time spent on basic science education. This method is a means to provide the essential information and skills in less time. The overall impression was that the practice of joint central nervous system lectures and practicals was an efficient method for students, which suggests that joint lectures might also be useful for clinical subjects. About two-thirds of students felt that the joint anatomy and physiology lecture on the central nervous system was useful and necessary in understanding the relationship between morphology and function, at least for this subject. One-third of students were neutral on the effectiveness of this method. However, the survey results suggest that improvements are needed in the method and timing of joint lectures and practicals. The present teaching approach can be further improved by conducting combined lectures in which the form and function of anatomic structures are presented by the relevant departments during the same lecture. Finally, joint lecturers and practicals offer an opportunity to increase student understanding of the importance of new research findings by the present authors and other researchers.

Alloplastic temporomandibular joint replacement systems: a systematic review of their history.

PubMed

De Meurechy, N; Mommaerts, M Y

2018-06-01

This systematic review provides an overview of the historical evolution of the prosthetic temporomandibular joint and addresses the challenges and complications faced by engineers and surgeons, in an effort to shed light on why only a few systems remain available. A better understanding of the history of temporomandibular joint prostheses might also provide insights into the origin of the negative public opinion of the prosthesis, which is based on outdated information. A computerized search using the PubMed Central, ScienceDirect, Wiley Online, Ovid, and Cochrane Library databases was performed following the PRISMA guidelines. Out of 7122 articles identified, 41 met the inclusion criteria for this systematic review. Although several historical reviews have been published previously, none has covered such an extensive time period or has described all designs. Furthermore, besides providing a historical overview, this review discusses the rationale behind the evolution in design and biomaterials, which have largely contributed to the outcomes of the prosthetic systems. Copyright © 2018 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Joint force protection advanced security system (JFPASS) "the future of force protection: integrate and automate"

NASA Astrophysics Data System (ADS)

Lama, Carlos E.; Fagan, Joe E.

2009-09-01

The United States Department of Defense (DoD) defines 'force protection' as "preventive measures taken to mitigate hostile actions against DoD personnel (to include family members), resources, facilities, and critical information." Advanced technologies enable significant improvements in automating and distributing situation awareness, optimizing operator time, and improving sustainability, which enhance protection and lower costs. The JFPASS Joint Capability Technology Demonstration (JCTD) demonstrates a force protection environment that combines physical security and Chemical, Biological, Radiological, Nuclear, and Explosive (CBRNE) defense through the application of integrated command and control and data fusion. The JFPASS JCTD provides a layered approach to force protection by integrating traditional sensors used in physical security, such as video cameras, battlefield surveillance radars, unmanned and unattended ground sensors. The optimization of human participation and automation of processes is achieved by employment of unmanned ground vehicles, along with remotely operated lethal and less-than-lethal weapon systems. These capabilities are integrated via a tailorable, user-defined common operational picture display through a data fusion engine operating in the background. The combined systems automate the screening of alarms, manage the information displays, and provide assessment and response measures. The data fusion engine links disparate sensors and systems, and applies tailored logic to focus the assessment of events. It enables timely responses by providing the user with automated and semi-automated decision support tools. The JFPASS JCTD uses standard communication/data exchange protocols, which allow the system to incorporate future sensor technologies or communication networks, while maintaining the ability to communicate with legacy or existing systems.

Adapting the Structural Family Systems Rating to Assess the Patterns of Interaction in Families of Dementia Caregivers

ERIC Educational Resources Information Center

Mitrani, Victoria B.; Feaster, Daniel J.; McCabe, Brian E.; Czaja, Sara J.; Szapocznik, Jose

2005-01-01

Purpose: This study adapted the Structural Family Systems Ratings (SFSR), an observational measure of family interactions, for dementia caregivers. This article presents the development of the SFSR-Dementia Caregiver adaptation (SFSR-DC) and examines relationships between specific family-interaction patterns and caregiver distress. Design and…

An International Perspective on Regulated Family Day Care Systems

ERIC Educational Resources Information Center

Davis, Elise; Freeman, Ramona; Doherty, Gillian; Karlsson, Malene; Everiss, Liz; Couch, Jane; Foote, Lyn; Murray, Patricia; Modigliani, Kathy; Owen, Sue; Griffin, Sue; Friendly, Martha; McDonald, Grace; Bohanna, India; Corr, Lara; Smyth, Lisa; Morkeseth, Elisabeth Ianke; Morreaunet, Sissel; Ogi, Mari; Fukukawa, Sumi; Hinke-Rahnau, Jutta

2012-01-01

Despite emerging evidence of the contributors to high-quality family day care, a comprehensive comparison of international family day care systems has not been undertaken. The aim of this paper is to compare regulated family day care (FDC) in Australia, Canada, England and Wales, Germany, Ireland, Japan, Norway, New Zealand, Sweden, and the USA,…

Dichotomous versus semi-quantitative scoring of ultrasound joint inflammation in rheumatoid arthritis using novel individualized joint selection methods.

PubMed

Tan, York Kiat; Allen, John C; Lye, Weng Kit; Conaghan, Philip G; Chew, Li-Ching; Thumboo, Julian

2017-05-01

The aim of the study is to compare the responsiveness of two joint inflammation scoring systems (dichotomous scoring (DS) versus semi-quantitative scoring (SQS)) using novel individualized ultrasound joint selection methods and existing ultrasound joint selection methods. Responsiveness measured by the standardized response means (SRMs) using the DS and the SQS system (for both the novel and existing ultrasound joint selection methods) was derived using the baseline and the 3-month total inflammatory scores from 20 rheumatoid arthritis patients. The relative SRM gain ratios (SRM-Gains) for both scoring system (DS and SQS) comparing the novel to the existing methods were computed. Both scoring systems (DS and SQS) demonstrated substantial SRM-Gains (ranged from 3.31 to 5.67 for the DS system and ranged from 1.82 to 3.26 for the SQS system). The SRMs using the novel methods ranged from 0.94 to 1.36 for the DS system and ranged from 0.89 to 1.11 for the SQS system. The SRMs using the existing methods ranged from 0.24 to 0.32 for the DS system and ranged from 0.34 to 0.49 for the SQS system. The DS system appears to achieve high responsiveness comparable to SQS for the novel individualized ultrasound joint selection methods.

Wireless wearable range-of-motion sensor system for upper and lower extremity joints: a validation study.

PubMed

Kumar, Yogaprakash; Yen, Shih-Cheng; Tay, Arthur; Lee, Wangwei; Gao, Fan; Zhao, Ziyi; Li, Jingze; Hon, Benjamin; Tian-Ma Xu, Tim; Cheong, Angela; Koh, Karen; Ng, Yee-Sien; Chew, Effie; Koh, Gerald

2015-02-01

Range-of-motion (ROM) assessment is a critical assessment tool during the rehabilitation process. The conventional approach uses the goniometer which remains the most reliable instrument but it is usually time-consuming and subject to both intra- and inter-therapist measurement errors. An automated wireless wearable sensor system for the measurement of ROM has previously been developed by the current authors. Presented is the correlation and accuracy of the automated wireless wearable sensor system against a goniometer in measuring ROM in the major joints of upper (UEs) and lower extremities (LEs) in 19 healthy subjects and 20 newly disabled inpatients through intra (same) subject comparison of ROM assessments between the sensor system against goniometer measurements by physical therapists. In healthy subjects, ROM measurements using the new sensor system were highly correlated with goniometry, with 95% of differences < 20° and 10° for most movements in major joints of UE and LE, respectively. Among inpatients undergoing rehabilitation, ROM measurements using the new sensor system were also highly correlated with goniometry, with 95% of the differences being < 20° and 25° for most movements in the major joints of UE and LE, respectively.

Correlation between muscle structure and filter characteristics of the muscle-joint system in three orthopteran insect species

PubMed

BÄSsler; BÜSchges; Meditz; BÄSsler

1996-01-01

In orthopteran insects, neural networks for joint control exhibit different characteristics due to behavioural specializations. We investigated whether these differences are generated purely by the neuronal networks, or whether characteristics of the muscles or joint architecture (muscle­joint system) are also involved in these behavioural specializations. We compared the properties of the muscle system moving the femur­tibia joint of the middle and hindleg of three species, Carausius morosus, Cuniculina impigra and Locusta migratoria. Four aspects were analysed for the tibial extensor muscle: (i) the frequency-dependence of motoneuronal activity in response to sinusoidal stimulation of the femoral chordotonal organ (fCO), (ii) the muscle structure, (iii) the innervation pattern of the muscle and (iv) the histochemical properties of the muscle fibres. These aspects were compared with the filter characteristics of the open-loop femur­tibia control system and of the muscle­joint system involved. Whereas in both phasmid species (Carausius morosus and Cuniculina impigra) the motoneuronal activity steadily increases with sinusoidal stimulation of the fCO in the frequency range 0.01­5 Hz, in Locusta migratoria there is a decrease in motoneuronal activity between 0.01 and 0.3 Hz. The muscle structure is basically similar in all three species, as the number of singly innervated muscle fibres (supplied by the fast extensor tibiae motor neurone, FETi) decreases from proximal to distal. The number of triply innervated fibres supplied by the FETi, the slow extensor tibiae (SETi) and the common inhibitor 1 (CI1) is maximal in the middle of the muscle, and the number of dually innervated fibres (supplied by SETi, CI1) increases from proximal to distal. Differences between the locust and the two phasmid species exist in the distal portion of the muscle. The phasmid extensor tibiae muscle contains a morphologically distinct bundle of muscle fibres, not present

Optimum design of Geodesic dome’s jointing system

NASA Astrophysics Data System (ADS)

Tran, Huy. T.

2018-04-01

This study attempts to create a new design for joint connector of Geodesic dome. A new type of joint connector design is proposed for flexible rotating connection; comparing it to another, this design is cheaper and workable. After calculating the bearing capacity of the sample according to EC3 and Vietnam standard TCVN 5575-2012, FEM model of the design sample is carried out in many specific situation to consider the stress distribution, the deformation, the local destruction… in the connector. The analytical results and the FE data are consistent. The FE analysis also points out the behavior of some details that simple calculation cannot show. Hence, we can choose the optimum design of joint connector.

Too close and too rigid: applying the Circumplex Model of Family Systems to first-generation family firms.

PubMed

Michael-Tsabari, Nava; Lavee, Yoav

2012-06-01

Despite growing research interest in family businesses, little is known about the characteristics of the families engaging in them. The present paper uses Olson's (Journal of Psychotherapy & the Family, 1988, 4(12), 7-49; Journal of Family Therapy, 2000, 22, 144-167) Circumplex Model of Marital and Family Systems to look at first-generation family firms. We describe existing typologies of family businesses and discuss similarities between the characteristics of first-generation family firms and the rigidly enmeshed family type described in the Circumplex Model. The Steinberg family business (Gibbon & Hadekel (1990) Steinberg: The breakup of a family empire. ON, Canada: MacMillan) serves to illustrate the difficulties of rigidly enmeshed first-generation family firms. Implications for understanding troubled family businesses are discussed together with guidelines for the assessment of a family business in crisis and for intervention: enhancing open communication; allowing for more flexible leadership style, roles, and rules; and maintaining a balance between togetherness and separateness. © 2012 American Association for Marriage and Family Therapy.

Family medicine in Iran: facing the health system challenges.

PubMed

Esmaeili, Reza; Hadian, Mohammad; Rashidian, Arash; Shariati, Mohammad; Ghaderi, Hossien

2014-11-30

In response to the current fragmented context of health systems, it is essential to support the revitalization of primary health care in order to provide a stronger sense of direction and integrity. Around the world, family medicine recognized as a core discipline for strengthening primary health care setting. This study aimed to understand the perspectives of policy makers and decision makers of Iran's health system about the implementation of family medicine in Iran urban areas. This study is a qualitative study with framework analysis. Purposive semi-structured interviews were conducted with Policy and decision makers in the five main organizations of Iran health care system. The codes were extracted using inductive and deductive methods. According to 27 semi-structured interviews were conducted with Policy and decision makers, three main themes and 8 subthemes extracted, including: The development of referral system, better access to health care and the management of chronic diseases. Family medicine is a viable means for a series of crucial reforms in the face of the current challenges of health system. Implementation of family medicine can strengthen the PHC model in Iran urban areas. Attempting to create a general consensus among various stakeholders is essential for effective implementation of the project.

Joint Discussion 14 Modeling dense stellar systems

NASA Astrophysics Data System (ADS)

Sills, Alison I.; Subr, Ladislav; Portegies Zwart, Simon F.

2007-08-01

Joint Discussion 14 was held at the General Assembly of the International Astronomical Union from August 17 until 23 in the beautiful Bohemian capital, Prague. The blueprints for this meeting were laid out during the MODEST-5 workshop, held in the Canadian city of Hamilton, Ontario in August 2004. We were sitting in a nice cafe with local brew and food, discussing the future of the MODEST community when we posed the idea for this Joint Discussion at the General Assembly. The meeting was then coined MODEST-7.

Review of oil families and their petroleum systems of the Williston Basin

USGS Publications Warehouse

Lillis, Paul G.

2013-01-01

Oil bulk properties such as API gravity, sulfur content, and pour point are much underutilized in the recent geochemical literature and are found to be useful here in differentiating oil families. The Red River petroleum system has two oil families that can be differentiated based on pour point. The oils in the Madison petroleum system can be divided into two families based on API gravity-sulfur content relationships, with one family derived from Type II-S kerogen and the other family derived from Type II kerogen with medium sulfur content. The Tyler petroleum system of the Williston Basin may be distinguished from the Heath-Tyler petroleum system in central Montana based on differences in geology and petroleum geochemistry, with Tyler petroleum system oils having a higher pour point and lower sulfur content.

Flange joint system for SRF cavities utilizing high force spring clamps for low particle generation

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

A flange joint system for SRF cavities. The flange joint system includes a set of high force spring clamps that produce high force on the simple flanges of Superconducting Radio Frequency (SRF) cavities to squeeze conventional metallic seals. The system establishes the required vacuum and RF-tight seal with minimum particle contamination to the inside of the cavity assembly. The spring clamps are designed to stay within their elastic range while being forced open enough to mount over the flange pair. Upon release, the clamps have enough force to plastically deform metallic seal surfaces and continue to a new equilibrium sprungmore » dimension where the flanges remain held against one another with enough preload such that normal handling will not break the seal.« less

Adding a Systemic Touch to Rational-Emotive Therapy for Families.

ERIC Educational Resources Information Center

Russell, Todd T.; Morrill, Correen M.

1989-01-01

Proposes a theoretical and practical hybrid model for family counseling based on integrating the rational-emotive and family systems approach. Notes that these combined approaches offer the counselor a systematic theoretical structure for conceptualizing family dysfunction, from which additional strategies for changing inappropriate belief systems…

Adjustable bias column end joint assembly

NASA Technical Reports Server (NTRS)

Wallsom, Richard E. (Inventor); Bush, Harold G. (Inventor)

1994-01-01

An adjustable mechanical end joint system for connecting structural column elements and eliminating the possibility of free movement between joint halves during loading or vibration has a node joint body having a cylindrical engaging end and a column end body having a cylindrical engaging end. The column end joint body has a compressible preload mechanism and plunger means housed therein. The compressible preload mechanism may be adjusted from the exterior of the column end joint body through a port.

[The role of families in the Quebec mental health system].

PubMed

Bonin, Jean-Pierre; Chicoine, Gabrielle; Fradet, Hélène; Larue, Caroline; Racine, Hélène; Jacques, Marie-Claude; St-Cyr Tribble, Denise

2014-01-01

Purpose. This paper aims to summarize the current situation regarding the role of families of persons with mental disorders within the mental health system in Quebec.Methods. We made a research in the most recent and pertinent papers or books regarding: 1) the history of the family involvement in the mental health system in Quebec; 2) the present situation of these families and the models that we can see and 3) identify in recent governmental or research documents recommendations regarding a greater empowerment of the families in the mental health system.Results. The research provides a historical perspective to the roles occupied by families. First the family was described as a causal agent; the work of the psychoanalyst Freud described the family unit as a source of conflicts in the areas of affect and sexual dynamics, and which results in the appearance of psychiatric symptoms. Later, this view of a causal agent came both from the point of view of genetic and from expressed emotions. In the 70's new perspectives such as general systems theory (von Bertalanffy, 1968), described the family as responsive to mental disorder of one of its members rather than a responsible agent. With the deinstitutionalization movement, the family was perceived as a source of solutions for persons with mental illness, but also as persons who can live some burden. This subject became well described and a several studies reported about adverse effects of caring for a person with mental disorder on the health, well-being and feeling of caregiver burden. In the 90's, some government action plans called for the relationship between the family and the health system as a partnership. Also, families want to be involved in decisions about care and to be informed about the diagnosis and treatment options. ( Lefley et Wasow, 1993)A new model developed by FFAPAMM that identifies three main roles enables to contextualize the current role in the current system. This model, called CAP lists and

Estimation of Time-Varying, Intrinsic and Reflex Dynamic Joint Stiffness during Movement. Application to the Ankle Joint

PubMed Central

Guarín, Diego L.; Kearney, Robert E.

2017-01-01

Dynamic joint stiffness determines the relation between joint position and torque, and plays a vital role in the control of posture and movement. Dynamic joint stiffness can be quantified during quasi-stationary conditions using disturbance experiments, where small position perturbations are applied to the joint and the torque response is recorded. Dynamic joint stiffness is composed of intrinsic and reflex mechanisms that act and change together, so that nonlinear, mathematical models and specialized system identification techniques are necessary to estimate their relative contributions to overall joint stiffness. Quasi-stationary experiments have demonstrated that dynamic joint stiffness is heavily modulated by joint position and voluntary torque. Consequently, during movement, when joint position and torque change rapidly, dynamic joint stiffness will be Time-Varying (TV). This paper introduces a new method to quantify the TV intrinsic and reflex components of dynamic joint stiffness during movement. The algorithm combines ensemble and deterministic approaches for estimation of TV systems; and uses a TV, parallel-cascade, nonlinear system identification technique to separate overall dynamic joint stiffness into intrinsic and reflex components from position and torque records. Simulation studies of a stiffness model, whose parameters varied with time as is expected during walking, demonstrated that the new algorithm accurately tracked the changes in dynamic joint stiffness using as little as 40 gait cycles. The method was also used to estimate the intrinsic and reflex dynamic ankle stiffness from an experiment with a healthy subject during which ankle movements were imposed while the subject maintained a constant muscle contraction. The method identified TV stiffness model parameters that predicted the measured torque very well, accounting for more than 95% of its variance. Moreover, both intrinsic and reflex dynamic stiffness were heavily modulated through the

Transition Plan For the Technology Demonstration of the Joint Network Defence and Management System (JNDMS)

DTIC Science & Technology

2009-11-01

Technology Demonstration of the Joint Network Defence and Management System (JNDMS) Brett Trask; Novembre 2009. Dès le départ, nous avons mis au point le... 13 5.1 System Specification... 13 5.1.1 Scope ............................................................................................................. 13 5.2 Security

Development of the joint munitions planning system - a planning tool for the ammunition community.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hummel, J. R.; Winiecki, A. L.; Fowler, R. S.

2004-10-01

The United States Army Joint Munitions Command (JMC) is the executive agent for the Single Manager for Conventional Ammunition (SMCA). As such the JMC is responsible for the storage and transportation of all Service's SMCA as well as non-SMCA munitions. Part of the JMC mission requires that complex depot capacity studies, transportation capabilities analyses, peacetime re-allocations/ redistribution plans and time-phased deployment distribution plans be developed. Beginning in 1999 the Joint Munitions Planning System (JMPS) was developed to provide sourcing and movement solutions of ammunition for military planners.

Using a complex adaptive system lens to understand family caregiving experiences navigating the stroke rehabilitation system.

PubMed

Ghazzawi, Andrea; Kuziemsky, Craig; O'Sullivan, Tracey

2016-10-01

Family caregivers provide the stroke survivor with social support and continuity during the transition home from a rehabilitation facility. In this exploratory study we examined family caregivers' perceptions and experiences navigating the stroke rehabilitation system. The theories of continuity of care and complex adaptive systems were integrated to examine the transition from a stroke rehabilitation facility to the patient's home. This study provides an understanding of the interacting complexities at the macro and micro levels. A convenient sample of family caregivers (n = 14) who provide care for a stroke survivor were recruited 4-12 weeks following the patient's discharge from a stroke rehabilitation facility in Ontario, Canada. Interviews were conducted with family caregivers to examine their perceptions and experiences navigating the stroke rehabilitation system. Directed and inductive content analysis and the theory of Complex Adaptive Systems were used to interpret the perceptions of family caregivers. Health system policies and procedures at the macro-level determined the types and timing of information being provided to caregivers, and impacted continuity of care and access to supports and services at the micro-level. Supports and services in the community, such as outpatient physiotherapy services, were limited or did not meet the specific needs of the stroke survivors or family caregivers. Relationships with health providers, informational support, and continuity in case management all influence the family caregiving experience and ultimately the quality of care for the stroke survivor, during the transition home from a rehabilitation facility.

Topical versus systemic diclofenac in the treatment of temporo-mandibular joint dysfunction symptoms.

PubMed

Di Rienzo Businco, L; Di Rienzo Businco, A; D'Emilia, M; Lauriello, M; Coen Tirelli, G

2004-10-01

spontaneously. Our results demonstrate that topically applied diclofenac and oral diclofenac are equally effective in the treatment of temporomandibular joint dysfunction symptoms. Topical diclofenac has the advantage that it does not have adverse systemic effects, whereas oral diclofenac had untoward effects on the gastric apparatus. The efficacy of diclofenac topically applied on the temporomandibular joint region observed in group B is explained by the association of diclofenac with dimethyl-sulfoxide, which enables a rapid effective penetration into the joint tissues. It is noteworthy that dimethyl-sulfoxide favours transuctaneous absorption when used in a multi-dose regime as in our study with 4 doses a day. Thus, single, "as required", applications should be avoided because this practice results in scarce absorption of diclofenac.

Comparison of joint space versus task force load distribution optimization for a multiarm manipulator system

NASA Technical Reports Server (NTRS)

Soloway, Donald I.; Alberts, Thomas E.

1989-01-01

It is often proposed that the redundancy in choosing a force distribution for multiple arms grasping a single object should be handled by minimizing a quadratic performance index. The performance index may be formulated in terms of joint torques or in terms of the Cartesian space force/torque applied to the body by the grippers. The former seeks to minimize power consumption while the latter minimizes body stresses. Because the cost functions are related to each other by a joint angle dependent transformation on the weight matrix, it might be argued that either method tends to reduce power consumption, but clearly the joint space minimization is optimal. A comparison of these two options is presented with consideration given to computational cost and power consumption. Simulation results using a two arm robot system are presented to show the savings realized by employing the joint space optimization. These savings are offset by additional complexity, computation time and in some cases processor power consumption.

Hypermobile joints

MedlinePlus

... Hypermobility syndrome Images Hypermobile joints References Ball JW, Dains JE, Flynn JA, Solomon BS, Stewart RW. Musculoskeletal system. In: Ball JW, Dains JE, Flynn JA, Solomon BS, Stewart RW, eds. ...

Installation and performance evaluation of the wabocrete FMV joint system for bridge decks.

DOT National Transportation Integrated Search

1990-01-01

A Wabocrete FMV bridge deck expansion joint system was installed on the Alternate Rte. 58 bridge over the Clinch River in November 1986. The bridge was placed in service in mid-1987. The report concerns an installation and performance evaluation of t...

Joint nonlinearity effects in the design of a flexible truss structure control system

NASA Technical Reports Server (NTRS)

Mercadal, Mathieu

1986-01-01

Nonlinear effects are introduced in the dynamics of large space truss structures by the connecting joints which are designed with rather important tolerances to facilitate the assembly of the structures in space. The purpose was to develop means to investigate the nonlinear dynamics of the structures, particularly the limit cycles that might occur when active control is applied to the structures. An analytical method was sought and derived to predict the occurrence of limit cycles and to determine their stability. This method is mainly based on the quasi-linearization of every joint using describing functions. This approach was proven successful when simple dynamical systems were tested. Its applicability to larger systems depends on the amount of computations it requires, and estimates of the computational task tend to indicate that the number of individual sources of nonlinearity should be limited. Alternate analytical approaches, which do not account for every single nonlinearity, or the simulation of a simplified model of the dynamical system should, therefore, be investigated to determine a more effective way to predict limit cycles in large dynamical systems with an important number of distributed nonlinearities.

A family systems nursing intervention model for paediatric health crisis.

PubMed

Tomlinson, Patricia Short; Peden-McAlpine, Cynthia; Sherman, Suzan

2012-03-01

This article discusses the development of a family systems nursing intervention for clinical use in health crisis. Although studies in paediatric critical care provide evidence that family stress is an important clinical phenomenon, studies have demonstrated that few nurses have the requisite family intervention skills to provide family members with adequate support during crisis. In addition, few intervention studies that focus on provider-family relationships with the goal of reducing stress have been reported. This article contributes to the literature by redressing this lack. Data sources.  The literature search supporting this project spanned from 1980 to 2009 and included searches from classic nursing theory, family theory and relevant nursing research specific to the design of the intervention reported. The goal of the intervention is to provide a theoretical and practical foundation for explicit action that enhances relationships with caregivers thereby supporting the integrity of the family and enhancing their coping abilities. The intervention, based on the Family Systems Model and the family's understandings of the situation, defines specific goals and desired outcomes to guide strategic actions. Discussion of the conceptual foundation, procedural development and an example of the protocol is provided. Implications for nursing.  The intervention is designed for nurses with limited knowledge in family theory to aid them to better help families dealing with stress. The proposed intervention can be used to increase nurses' skills in family centred nursing care. Although designed for use in paediatric critical care, it can, with modifications, be used in other nursing specialty areas. © 2011 Blackwell Publishing Ltd.

A Structural Approach to Unresolved Mourning in Single Parent Family Systems.

ERIC Educational Resources Information Center

Fulmer, Richard H.

1983-01-01

Considers the mother's depression as a special problem in therapy of single-parent families, resulting from unresolved mourning maintained by the family system. Offers reasons why the single-parent family's structure seems inherently vulnerable to unresolved mourning. Suggests techniques of Structural Family Therapy to facilitate mourning in such…

Joint Command Decision Support System

DTIC Science & Technology

2011-06-01

2010 Olympics and Paralympics games , about a hundred agencies and organizations were involved with the safety and security of the games . Accordingly...Joint Task Force Games (JTFG) staff members were augmented with other Command Staff from Canada Command and Canadian Operational Support Command...CANOSCOM) to create an operational HQ. The scenario used for demonstration was based on fictitious Olympic Games (Breton and Guitouni 2008). The scenario

The association between parental interaction style and children’s joint engagement in families with toddlers with autism

PubMed Central

Patterson, Stephanie Y; Elder, Lauren; Gulsrud, Amanda; Kasari, Connie

2014-01-01

Purpose This study examines the relationship between parental interaction style (responsive vs directive) and child-initiated joint engagement within caregiver–child interactions with toddlers diagnosed with autism spectrum disorders. Method Videotaped interactions of 85 toddler–caregiver dyads were coded for child engagement and both parental responsiveness and directiveness. Results Altogether, children spent less than one-third of the interaction jointly engaged. After controlling for child characteristics, parental style was associated with the initiator (child or parent) of joint engagement. Specifically, responsiveness predicted total time in child-initiated joint engagement, while directiveness predicted total time in parent-initiated joint engagement. Children’s social behaviours were associated with child-initiated joint engagement. Discussion Social initiations are a key target for children with autism spectrum disorders. Results demonstrate that child initiations and global social behaviour ratings are associated with parental responsivity. Responsivity may be a critical factor to facilitate children’s initiations. PMID:24104518

Applying a family systems lens to proxy decision making in clinical practice and research.

PubMed

Rolland, John S; Emanuel, Linda L; Torke, Alexia M

2017-03-01

When patients are incapacitated and face serious illness, family members must make medical decisions for the patient. Medical decision sciences give only modest attention to the relationships among patients and their family members, including impact that these relationships have on the decision-making process. A review of the literature reveals little effort to systematically apply a theoretical framework to the role of family interactions in proxy decision making. A family systems perspective can provide a useful lens through which to understand the dynamics of proxy decision making. This article considers the mutual impact of family systems on the processes and outcomes of proxy decision making. The article first reviews medical decision science's evolution and focus on proxy decision making and then reviews a family systems approach, giving particular attention to Rolland's Family Systems Illness Model. A case illustrates how clinical practice and how research would benefit from bringing family systems thinking to proxy decisions. We recommend including a family systems approach in medical decision science research and clinical practices around proxy decisions making. We propose that clinical decisions could be less conflicted and less emotionally troubling for families and clinicians if family systems approaches were included. This perspective opens new directions for research and novel approaches to clinical care. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Early Family System Types Predict Children's Emotional Attention Biases at School Age

ERIC Educational Resources Information Center

Lindblom, Jallu; Peltola, Mikko J.; Vänskä, Mervi; Hietanen, Jari K.; Laakso, Anu; Tiitinen, Aila; Tulppala, Maija; Punamäki, Raija-Leena

2017-01-01

The family environment shapes children's social information processing and emotion regulation. Yet, the long-term effects of early family systems have rarely been studied. This study investigated how family system types predict children's attentional biases toward facial expressions at the age of 10 years. The participants were 79 children from…

Changing Systems for Children and Families.

ERIC Educational Resources Information Center

McCart, Linda

This document summarizes the results of research on reform of state and national policy affecting families and children. The document begins with a rationale for change, and follows with four chapters that identify barriers stemming from attitudes, system organization, resource limitations, and technical problems. Each chapter suggests strategies…

Metal to ceramic sealed joint

DOEpatents

Lasecki, J.V.; Novak, R.F.; McBride, J.R.

1991-08-27

A metal to ceramic sealed joint which can withstand wide variations in temperature and maintain a good seal is provided for use in a device adapted to withstand thermal cycling from about 20 to about 1000 degrees C. The sealed joint includes a metal member, a ceramic member having an end portion, and an active metal braze forming a joint to seal the metal member to the ceramic member. The joint is positioned remote from the end portion of the ceramic member to avoid stresses at the ends or edges of the ceramic member. The sealed joint is particularly suited for use to form sealed metal to ceramic joints in a thermoelectric generator such as a sodium heat engine where a solid ceramic electrolyte is joined to metal parts in the system. 11 figures.

Metal to ceramic sealed joint

DOEpatents

Lasecki, John V.; Novak, Robert F.; McBride, James R.

1991-01-01

A metal to ceramic sealed joint which can withstand wide variations in temperature and maintain a good seal is provided for use in a device adapted to withstand thermal cycling from about 20 to about 1000 degrees C. The sealed joint includes a metal member, a ceramic member having an end portion, and an active metal braze forming a joint to seal the metal member to the ceramic member. The joint is positioned remote from the end portion of the ceramic member to avoid stresses at the ends or edges of the ceramic member. The sealed joint is particularly suited for use to form sealed metal to ceramic joints in a thermoelectric generator such as a sodium heat engine where a solid ceramic electrolyte is joined to metal parts in the system.

A Framework for a Supervisory Expert System for Robotic Manipulators with Joint-Position Limits and Joint-Rate Limits

NASA Technical Reports Server (NTRS)

Mutambara, Arthur G. O.; Litt, Jonathan

1998-01-01

This report addresses the problem of path planning and control of robotic manipulators which have joint-position limits and joint-rate limits. The manipulators move autonomously and carry out variable tasks in a dynamic, unstructured and cluttered environment. The issue considered is whether the robotic manipulator can achieve all its tasks, and if it cannot, the objective is to identify the closest achievable goal. This problem is formalized and systematically solved for generic manipulators by using inverse kinematics and forward kinematics. Inverse kinematics are employed to define the subspace, workspace and constrained workspace, which are then used to identify when a task is not achievable. The closest achievable goal is obtained by determining weights for an optimal control redistribution scheme. These weights are quantified by using forward kinematics. Conditions leading to joint rate limits are identified, in particular it is established that all generic manipulators have singularities at the boundary of their workspace, while some have loci of singularities inside their workspace. Once the manipulator singularity is identified the command redistribution scheme is used to compute the closest achievable Cartesian velocities. Two examples are used to illustrate the use of the algorithm: A three link planar manipulator and the Unimation Puma 560. Implementation of the derived algorithm is effected by using a supervisory expert system to check whether the desired goal lies in the constrained workspace and if not, to evoke the redistribution scheme which determines the constraint relaxation between end effector position and orientation, and then computes optimal gains.

Systemic family psychotherapy in China: a qualitative analysis of therapy process.

PubMed

Liu, Liang; Miller, John K; Zhao, Xudong; Ma, Xiquan; Wang, Jikun; Li, Wentian

2013-12-01

Although the procedure of systemic family therapy has been extensively researched in Western culture, few studies on this subject have been conducted in China. The aim of this study was to specify the therapy-delivered interventions in Chinese systemic family therapy and to explore how Western-imported systemic therapy model is delivered in Chinese culture. A qualitative and exploratory research approach was taken in which thematic analysis was used to analyse the transcribed psychotherapy videotapes with Chinese families. Twenty-six hours of video-recorded systemic family therapy sessions from 14 Chinese family cases were sampled. Thematic analysis was used to analyse the transcriptions of therapy sessions and identify therapist-generated interventions in therapy. Frequencies of different interventions were counted, and correspondence analysis (CA) was used to reveal the corresponding relationships between different interventions. Analysis led to two main themes related to therapists-delivered interventions: Therapist's intention and therapy technique. Results revealed 15 types of therapist's intentions and 16 categories of therapy techniques. CA indicated that therapists' intentions changed across different therapy stages and specific techniques were used to achieve corresponding intentions. Interventions delivered in Chinese systemic therapy are mainly adherent with Milan and post-Milan systemic models. Due to the shortage in systemic therapy service in China and Chinese culture advocating reverence to authority, components of psycho-education, guidance, and metaphor are adopted in Chinese systemic practice. Some directions for future research are suggested. © 2012 The British Psychological Society.

The impact of joint responses of devices in an airport security system.

PubMed

Nie, Xiaofeng; Batta, Rajan; Drury, Colin G; Lin, Li

2009-02-01

In this article, we consider a model for an airport security system in which the declaration of a threat is based on the joint responses of inspection devices. This is in contrast to the typical system in which each check station independently declares a passenger as having a threat or not having a threat. In our framework the declaration of threat/no-threat is based upon the passenger scores at the check stations he/she goes through. To do this we use concepts from classification theory in the field of multivariate statistics analysis and focus on the main objective of minimizing the expected cost of misclassification. The corresponding correct classification and misclassification probabilities can be obtained by using a simulation-based method. After computing the overall false alarm and false clear probabilities, we compare our joint response system with two other independently operated systems. A model that groups passengers in a manner that minimizes the false alarm probability while maintaining the false clear probability within specifications set by a security authority is considered. We also analyze the staffing needs at each check station for such an inspection scheme. An illustrative example is provided along with sensitivity analysis on key model parameters. A discussion is provided on some implementation issues, on the various assumptions made in the analysis, and on potential drawbacks of the approach.

The Female Voice: Applications to Bowen's Family Systems Theory.

ERIC Educational Resources Information Center

Knudson-Martin, Carmen

1994-01-01

Responds to calls from feminist scholars to address potential biases against women in theories of family therapy. Summarizes findings from studies of female development and integrates findings into expanded model of Bowen's family systems theory. Includes case example comparing expanded model with traditional application of Bowen's theory.…

Chinese American Family Food Systems: Impact of Western Influences

ERIC Educational Resources Information Center

Lv, Nan; Brown, J. Lynne

2010-01-01

Objective: To investigate the family food system in first-generation Chinese American families. Design: Qualitative interviews using reciprocal determinism constructs to understand influences on food choices. Setting: Weekend Chinese schools in Pennsylvania. Participants: Twenty couples with at least 1 child aged 5 or older enrolled in a Chinese…

Improving air traffic control: Proving new tools or approving the joint human-machine system?

NASA Technical Reports Server (NTRS)

Gaillard, Irene; Leroux, Marcel

1994-01-01

From the description of a field problem (i.e., designing decision aids for air traffic controllers), this paper points out how a cognitive engineering approach provides the milestones for the evaluation of future joint human-machine systems.

Objective Assessment of Joint Stiffness: A Clinically Oriented Hardware and Software Device with an Application to the Shoulder Joint.

PubMed

McQuade, Kevin; Price, Robert; Liu, Nelson; Ciol, Marcia A

2012-08-30

Examination of articular joints is largely based on subjective assessment of the "end-feel" of the joint in response to manually applied forces at different joint orientations. This technical report aims to describe the development of an objective method to examine joints in general, with specific application to the shoulder, and suitable for clinical use. We adapted existing hardware and developed laptop-based software to objectively record the force/displacement behavior of the glenohumeral joint during three common manual joint examination tests with the arm in six positions. An electromagnetic tracking system recorded three-dimensional positions of sensors attached to a clinician examiner and a patient. A hand-held force transducer recorded manually applied translational forces. The force and joint displacement were time-synchronized and the joint stiffness was calculated as a quantitative representation of the joint "end-feel." A methodology and specific system checks were developed to enhance clinical testing reproducibility and precision. The device and testing protocol were tested on 31 subjects (15 with healthy shoulders, and 16 with a variety of shoulder impairments). Results describe the stiffness responses, and demonstrate the feasibility of using the device and methods in clinical settings.

Joint optimization of regional water-power systems

NASA Astrophysics Data System (ADS)

Pereira-Cardenal, Silvio J.; Mo, Birger; Gjelsvik, Anders; Riegels, Niels D.; Arnbjerg-Nielsen, Karsten; Bauer-Gottwein, Peter

2016-06-01

Energy and water resources systems are tightly coupled; energy is needed to deliver water and water is needed to extract or produce energy. Growing pressure on these resources has raised concerns about their long-term management and highlights the need to develop integrated solutions. A method for joint optimization of water and electric power systems was developed in order to identify methodologies to assess the broader interactions between water and energy systems. The proposed method is to include water users and power producers into an economic optimization problem that minimizes the cost of power production and maximizes the benefits of water allocation, subject to constraints from the power and hydrological systems. The method was tested on the Iberian Peninsula using simplified models of the seven major river basins and the power market. The optimization problem was successfully solved using stochastic dual dynamic programming. The results showed that current water allocation to hydropower producers in basins with high irrigation productivity, and to irrigation users in basins with high hydropower productivity was sub-optimal. Optimal allocation was achieved by managing reservoirs in very distinct ways, according to the local inflow, storage capacity, hydropower productivity, and irrigation demand and productivity. This highlights the importance of appropriately representing the water users' spatial distribution and marginal benefits and costs when allocating water resources optimally. The method can handle further spatial disaggregation and can be extended to include other aspects of the water-energy nexus.

Joint Channel and Phase Noise Estimation in MIMO-OFDM Systems

NASA Astrophysics Data System (ADS)

Ngebani, I. M.; Chuma, J. M.; Zibani, I.; Matlotse, E.; Tsamaase, K.

2017-05-01

The combination of multiple-input multiple-output (MIMO) techniques with orthogonal frequency division multiplexing (OFDM), MIMO-OFDM, is a promising way of achieving high spectral efficiency in wireless communication systems. However, the performance of MIMO-ODFM systems is highly degraded by radio frequency (RF) impairments such as phase noise. Similar to the single-input single-output (SISO) case, phase noise in MIMO-OFDM systems results in a common phase error (CPE) and inter carrier interference (ICI). In this paper the problem of joint channel and phase noise estimation in a system with multiple transmit and receive antennas where each antenna is equipped with its own independent oscillator is tackled. The technique employed makes use of a novel placement of pilot carriers in the preamble and data portion of the MIMO-OFDM frame. Numerical results using a 16 and 64 quadrature amplitude modulation QAM schemes are provided to illustrate the effectiveness of the proposed scheme for MIMO-OFDM systems.

A Home Health Care System for Family Doctor

NASA Astrophysics Data System (ADS)

Hamabe, Ryuji; Taketa, Norihiro

We propose a constitution technique of small-scale Home Health Care system for family doctor that has been developed by applying various API of JAVA. One function is vital data transmission which allows a family doctor to check the data of elderly persons with ease via Internet. Vital data is encrypted and transmitted for the purpose of security. The other function is telecommunication with voice and face image for care consulting.

Converging flow joint insert system at an intersection between adjacent transitions extending between a combustor and a turbine assembly in a gas turbine engine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wiebe, David J.; Carlson, Andrew; Stoker, Kyle C.

A transition duct system for routing a gas flow in a combustion turbine engine is provided. The transition duct system includes one or more converging flow joint inserts forming a trailing edge at an intersection between adjacent transition ducts. The converging flow joint insert may be contained within a converging flow joint insert receiver and may be disconnected from the transition duct bodies by which the converging flow joint insert is positioned. Being disconnected eliminates stress formation within the converging flow joint insert, thereby enhancing the life of the insert. The converging flow joint insert may be removable such thatmore » the insert can be replaced once worn beyond design limits.« less

A joint FED watermarking system using spatial fusion for verifying the security issues of teleradiology.

PubMed

Viswanathan, P; Krishna, P Venkata

2014-05-01

Teleradiology allows transmission of medical images for clinical data interpretation to provide improved e-health care access, delivery, and standards. The remote transmission raises various ethical and legal issues like image retention, fraud, privacy, malpractice liability, etc. A joint FED watermarking system means a joint fingerprint/encryption/dual watermarking system is proposed for addressing these issues. The system combines a region based substitution dual watermarking algorithm using spatial fusion, stream cipher algorithm using symmetric key, and fingerprint verification algorithm using invariants. This paper aims to give access to the outcomes of medical images with confidentiality, availability, integrity, and its origin. The watermarking, encryption, and fingerprint enrollment are conducted jointly in protection stage such that the extraction, decryption, and verification can be applied independently. The dual watermarking system, introducing two different embedding schemes, one used for patient data and other for fingerprint features, reduces the difficulty in maintenance of multiple documents like authentication data, personnel and diagnosis data, and medical images. The spatial fusion algorithm, which determines the region of embedding using threshold from the image to embed the encrypted patient data, follows the exact rules of fusion resulting in better quality than other fusion techniques. The four step stream cipher algorithm using symmetric key for encrypting the patient data with fingerprint verification system using algebraic invariants improves the robustness of the medical information. The experiment result of proposed scheme is evaluated for security and quality analysis in DICOM medical images resulted well in terms of attacks, quality index, and imperceptibility.

A family of asymptotically stable control laws for flexible robots based on a passivity approach

NASA Technical Reports Server (NTRS)

Lanari, Leonardo; Wen, John T.

1991-01-01

A general family of asymptotically stabilizing control laws is introduced for a class of nonlinear Hamiltonian systems. The inherent passivity property of this class of systems and the Passivity Theorem are used to show the closed-loop input/output stability which is then related to the internal state space stability through the stabilizability and detectability condition. Applications of these results include fully actuated robots, flexible joint robots, and robots with link flexibility.

The Family Therapist's Role in Treating Families in Rural Communities: A General Systems Approach.

ERIC Educational Resources Information Center

Bagarozzi, Dennis A.

1982-01-01

Demonstrates how concepts derived from General Systems Theory can be used to understand and treat families living in impoverished, isolated rural communities in the South. Suggests interventions frequently need to be directed at the community system as a whole if community rules are to be modified for second-order change. (Author)

Perspectives on Family Literacy.

ERIC Educational Resources Information Center

Literacy Assistance Center, New York, NY.

This joint publication of the journals of the Literacy Assistance Center (LAC) and the National Even Start Association (NESA) focuses on innovative practices and theory in family literacy education, offers an array of perspectives to members of the literacy community, and critically examines some assumptions about literacy in general, as well as…

Families, time, and well-being in Canada.

PubMed

Burton, Peter; Phipps, Shelley

2011-01-01

We study changes in time and money available to families with children from 1971 to 2006. Increases in incomes at the top of the Canadian income distribution since the mid-1990s have taken place without any significant increases in total family hours of paid work. On the other hand, for families in the middle of the income distribution, family income has stagnated, despite the fact that parents jointly supply significantly higher hours of paid work. If both time and money are valuable resources for the production of well-being for family members, these findings suggest that inequality in well-being has increased even more than inequality of income.

Living in two homes-a Swedish national survey of wellbeing in 12 and 15 year olds with joint physical custody.

PubMed

Bergström, Malin; Modin, Bitte; Fransson, Emma; Rajmil, Luis; Berlin, Marie; Gustafsson, Per A; Hjern, Anders

2013-09-22

The practice of joint physical custody, where children spend equal time in each parent's home after they separate, is increasing in many countries. It is particularly common in Sweden, where this custody arrangement applies to 30 per cent of children with separated parents. The aim of this study was to examine children's health-related quality of life after parental separation, by comparing children living with both parents in nuclear families to those living in joint physical custody and other forms of domestic arrangements. Data from a national Swedish classroom study of 164,580 children aged 12 and 15-years-old were analysed by two-level linear regression modelling. Z-scores were used to equalise scales for ten dimensions of wellbeing from the KIDSCREEN-52 and the KIDSCREEN-10 Index and analysed for children in joint physical custody in comparison with children living in nuclear families and mostly or only with one parent. Living in a nuclear family was positively associated with almost all aspects of wellbeing in comparison to children with separated parents. Children in joint physical custody experienced more positive outcomes, in terms of subjective wellbeing, family life and peer relations, than children living mostly or only with one parent. For the 12-year-olds, beta coefficients for moods and emotions ranged from -0.20 to -0.33 and peer relations from -0.11 to -0.20 for children in joint physical custody and living mostly or only with one parent. The corresponding estimates for the 15-year-olds varied from -0.08 to -0.28 and from -0.03 to -0.13 on these subscales. The 15-year-olds in joint physical custody were more likely than the 12-year-olds to report similar wellbeing levels on most outcomes to the children in nuclear families. Children who spent equal time living with both parents after a separation reported better wellbeing than children in predominantly single parent care. This was particularly true for the 15-year-olds, while the reported

Black Families and the Moynihan Report: A Research Evaluation

ERIC Educational Resources Information Center

Berger, Alan S.; Simon, William

1974-01-01

Examines the joint effects of race, gender, social class, and family organization on a number of indicators of family interaction, anti-social behavior patterns, educational aspirations, and gender role concepts, using data collected from a random sample of the 14 to 18 year old population of Illinois. (Author/JM)

New VLBI Observing System 'OCTAVE-Family' to Support VDIF Specifications with 10 GigE for VERA, JVN, and Japanese e-VLBI (OCTAVE)

NASA Astrophysics Data System (ADS)

Oyama, T.; Kono, Y.; Suzuki, S.; Mizuno, S.; Bushimata, T.; Jike, T.; Kawaguchi, N.; Kobayashi, H.; Kimura, M.

2012-12-01

The new VLBI observing system (OCTAVE-Family) has been designed and developed based on the VSI-H and VDIF specifications at NAOJ (National Astronomical Observatory of Japan). It consists of 1) a high speed 8-Gsps 3-bit ADC (OCTAD) enabling us to acquire not only wide intermediate frequencies but also radio frequencies up to 50 GHz, 2) a converter (OCTAVIA) between one 10 GigE port and four 2 Gbps input and output ports conformable to VSI-H, 3) new recorders (OCTADISK and OCTADISK2) at rates of 4.5 Gbps and above 8 Gbps, and 4) a high speed software correlator system (OCTACOR) using GICO3 which was developed by NICT. These OCTAVE systems are connected via 10 GigE network with VDIF and VSI specifications. These components are used for VERA, JVN (Japanese VLBI network), and KJJVC (Korea-Japan Joint VLBI Correlator).

Problems With Large Joints: Shoulder Conditions.

PubMed

Campbell, Michael

2016-07-01

The shoulder is the most mobile joint in the body. It requires an extensive support system to create mobility while providing stability. Although there are many etiologies of shoulder pain, weakness, and instability, most injuries in the shoulder are due to overuse. Rotator cuff tears, labral tears, calcific tendinopathy, and impingement often result from chronic overuse injuries. Acute injuries include dislocations that can cause labral tears or other complications. Frozen shoulder refers to a typically benign condition of restricted range of motion that may spontaneously resolve but can cause prolonged pain and discomfort. The history combined with specific shoulder examination techniques can help family physicians successfully diagnose shoulder conditions. X-ray imaging typically is sufficient to rule out more serious etiologies when evaluating patients with shoulder conditions. However, imaging with magnetic resonance imaging (MRI) study or ultrasonography for rotator cuff tears, and MRI study with intra-articular contrast for labral tears, is needed to confirm these diagnoses. Corticosteroid injections and physical therapy are first-line treatments for most shoulder conditions. Surgical options typically are reserved for patients for whom conservative treatments are ineffective, and typically are performed arthroscopically. Written permission from the American Academy of Family Physicians is required for reproduction of this material in whole or in part in any form or medium.

Influence of a perturbation in the Gyrator domain for a joint transform correlator-based encryption system

NASA Astrophysics Data System (ADS)

Vilardy, Juan M.; Millán, María. S.; Pérez-Cabré, Elisabet

2017-08-01

We present the results of the noise and occlusion tests in the Gyrator domain (GD) for a joint transform correlator-based encryption system. This encryption system was recently proposed and it was implemented by using a fully phase nonzero-order joint transform correlator (JTC) and the Gyrator transform (GT). The decryption system was based on two successive GTs. In this paper, we make several numerical simulations in order to test the performance and robustness of the JTC-based encryption-decryption system in the GD when the encrypted image is corrupted by noise or occlusion. The encrypted image is affected by additive and multiplicative noise. We also test the effect of data loss due to partial occlusion of the encrypted information. Finally, we evaluate the performance and robustness of the encryption-decryption system in the GD by using the metric of the root mean square error (RMSE) between the original image and the decrypted image when the encrypted image is degraded by noise or modified by occlusion.

Family history of venous thromboembolism and risk of hospitalized thromboembolism in cancer patients: A nationwide family study.

PubMed

Zöller, Bengt; Palmer, Karolina; Li, Xinjun; Sundquist, Jan; Sundquist, Kristina

2015-09-01

The importance of family history of venous thromboembolism (VTE) in cancer patients is unclear. We conducted a nationwide study to determine whether family history of VTE is a risk factor for hospitalized VTE in cancer patients. The Swedish Multi-Generation Register was linked to the Swedish Hospital Discharge Register and the Swedish Cancer Registry. Familial (sibling/parent history of VTE) hazard ratios (HRs) for VTE in 20 cancer types were determined by cause-specific Cox regression for 258877 cancer patients in 1987-2010 without previous VTE. Familial HRs were also determined in 7644203 individuals without cancer or VTE before 1987, with follow-up in 1987-2010. Significant familial HRs for VTE in cancer patients were observed for the following cancer types: cancers of the breast (HR=1.79), lung (HR=1.21), colon (HR=1.30), prostate (HR=1.46), testis (HR=2.02), nervous system (HR=1.31), stomach (HR=1.73), and rectum (HR=1.77), as well as melanoma (HR=1.71), non-Hodgkin lymphoma (HR=1.32), myeloma (HR=1.69), and leukemia (HR=1.44). In a time-dependent analysis the familial HRs for VTE were significant before diagnosis of cancer (p-values <0.0001). After diagnosis of cancer the familial HRs VTE were weaker, with significant HRs for 12 cancer types. On an additive scale, the joint effect of cancer and family history was significantly increased compared to separate effects in four cancer types. However, for certain cancers the familial VTE cases were limited. Family history of VTE is a risk factor for VTE in several cancer types. However, familial factors are relatively more important in non-cancer than in cancer patients. Copyright © 2015 Elsevier Ltd. All rights reserved.

Virtual trajectories, joint stiffness, and changes in the limb natural frequency during single-joint oscillatory movements.

PubMed

Latash, M L

1992-07-01

In the framework of the equilibrium-point hypothesis, virtual trajectories and patterns of joint stiffness were reconstructed during voluntary single-joint oscillatory movements in the elbow joint at a variety of frequencies and against two inertial loads. At low frequencies, virtual trajectories were in-phase with the actual joint trajectories. Joint stiffness changed at a doubled frequency. An increase in movement frequency and/or inertial load led to an increase in the difference between the peaks of the actual and virtual trajectories and in both peak and averaged values of joint stiffness. At a certain, critical frequency, virtual trajectory was nearly flat. Further increase in movement frequency led to a 180 degree phase shift between the actual and virtual trajectories. The assessed values of the natural frequency of the system "limb + manipulandum" were close to the critical frequencies for both low and high inertial loads. Peak levels and integrals of the electromyograms of two flexor and two extensor muscles changed monotonically with movement frequency without any special behavior at the critical frequencies. Nearly flat virtual trajectories at the natural frequency make physical sense as hypothetical control signals, unlike the electromyographic recordings, since a system at its natural frequency requires minimal central interference. Modulation of joint stiffness is assumed to be an important adaptive mechanism attenuating difference between the system's natural frequency and desired movement frequency. Virtual trajectory is considered a behavioral observable. Phase transitions between the virtual and actual trajectories are illustrations of behavioral discontinuities introduced by slow changes in a higher level control parameter, movement frequency. Relative phase shift between these two trajectories may be considered an order parameter.

Effects of Neoprene Wrist/Hand Splints on Handwriting for Students with Joint Hypermobility Syndrome: A Single System Design Study

ERIC Educational Resources Information Center

Frohlich, Lauren; Wesley, Alison; Wallen, Margaret; Bundy, Anita

2012-01-01

Purpose: Pain associated with hypermobility of wrist and hand joints can contribute to decreased handwriting output. This study examined the effectiveness of a neoprene wrist/hand splint in reducing pain and increasing handwriting speed and endurance for students with joint hypermobility syndrome. Methods: Multiple baseline, single system design…

Derivation of optimal joint operating rules for multi-purpose multi-reservoir water-supply system

NASA Astrophysics Data System (ADS)

Tan, Qiao-feng; Wang, Xu; Wang, Hao; Wang, Chao; Lei, Xiao-hui; Xiong, Yi-song; Zhang, Wei

2017-08-01

The derivation of joint operating policy is a challenging task for a multi-purpose multi-reservoir system. This study proposed an aggregation-decomposition model to guide the joint operation of multi-purpose multi-reservoir system, including: (1) an aggregated model based on the improved hedging rule to ensure the long-term water-supply operating benefit; (2) a decomposed model to allocate the limited release to individual reservoirs for the purpose of maximizing the total profit of the facing period; and (3) a double-layer simulation-based optimization model to obtain the optimal time-varying hedging rules using the non-dominated sorting genetic algorithm II, whose objectives were to minimize maximum water deficit and maximize water supply reliability. The water-supply system of Li River in Guangxi Province, China, was selected for the case study. The results show that the operating policy proposed in this study is better than conventional operating rules and aggregated standard operating policy for both water supply and hydropower generation due to the use of hedging mechanism and effective coordination among multiple objectives.

Estimation of ground reaction forces and joint moments on the basis on plantar pressure insoles and wearable sensors for joint angle measurement.

PubMed

Ostaszewski, Michal; Pauk, Jolanta

2018-05-16

Gait analysis is a useful tool medical staff use to support clinical decision making. There is still an urgent need to develop low-cost and unobtrusive mobile health monitoring systems. The goal of this study was twofold. Firstly, a wearable sensor system composed of plantar pressure insoles and wearable sensors for joint angle measurement was developed. Secondly, the accuracy of the system in the measurement of ground reaction forces and joint moments was examined. The measurements included joint angles and plantar pressure distribution. To validate the wearable sensor system and examine the effectiveness of the proposed method for gait analysis, an experimental study on ten volunteer subjects was conducted. The accuracy of measurement of ground reaction forces and joint moments was validated against the results obtained from a reference motion capture system. Ground reaction forces and joint moments measured by the wearable sensor system showed a root mean square error of 1% for min. GRF and 27.3% for knee extension moment. The correlation coefficient was over 0.9, in comparison with the stationary motion capture system. The study suggests that the wearable sensor system could be recommended both for research and clinical applications outside a typical gait laboratory.

A dynamic family practice information system for enhanced financial management.

PubMed

Hofman, M N; Hughes, R L

1982-08-01

The definition of the fiscal unit/family structure has enabled users of the FMIS, or family practices in Colorado and Wyoming, to maintain accurate, ongoing financial information on their patients. In turn, this structure has been a major incentive for maintaining accurate family information, and a distinct benefit to FMIS users. This article has presented the rationale, design, and method of implementation of the fiscal unit structure, with the intention of presenting this concept to others for use in other information systems used in maintaining family-oriented financial and medical information for medical practices.

Impact of Family Support Systems on Children's Academic and Social Functioning after Parental Divorce.

ERIC Educational Resources Information Center

Guidubaldi, John; Cleminshaw, Helen

To determine whether support systems ameliorated the impact of divorce on family stress and child adjustment, the present study examined the availability to divorced families of various support systems, including the extended family, church, work, and community groups. Specifically, the study addressed the impact of parental support systems on…

The Interface of Mechanics and Nociception in Joint Pathophysiology: Insights From the Facet and Temporomandibular Joints

PubMed Central

Sperry, Megan M.; Ita, Meagan E.; Kartha, Sonia; Zhang, Sijia; Yu, Ya-Hsin; Winkelstein, Beth

2017-01-01

Chronic joint pain is a widespread problem that frequently occurs with aging and trauma. Pain occurs most often in synovial joints, the body's load bearing joints. The mechanical and molecular mechanisms contributing to synovial joint pain are reviewed using two examples, the cervical spinal facet joints and the temporomandibular joint (TMJ). Although much work has focused on the macroscale mechanics of joints in health and disease, the combined influence of tissue mechanics, molecular processes, and nociception in joint pain has only recently become a focus. Trauma and repeated loading can induce structural and biochemical changes in joints, altering their microenvironment and modifying the biomechanics of their constitutive tissues, which themselves are innervated. Peripheral pain sensors can become activated in response to changes in the joint microenvironment and relay pain signals to the spinal cord and brain where pain is processed and perceived. In some cases, pain circuitry is permanently changed, which may be a potential mechanism for sustained joint pain. However, it is most likely that alterations in both the joint microenvironment and the central nervous system (CNS) contribute to chronic pain. As such, the challenge of treating joint pain and degeneration is temporally and spatially complicated. This review summarizes anatomy, physiology, and pathophysiology of these joints and the sensory pain relays. Pain pathways are postulated to be sensitized by many factors, including degeneration and biochemical priming, with effects on thresholds for mechanical injury and/or dysfunction. Initiators of joint pain are discussed in the context of clinical challenges including the diagnosis and treatment of pain. PMID:28056123

From early family systems to internalizing symptoms: The role of emotion regulation and peer relations.

PubMed

Lindblom, Jallu; Vänskä, Mervi; Flykt, Marjo; Tolvanen, Asko; Tiitinen, Aila; Tulppala, Maija; Punamäki, Raija-Leena

2017-04-01

Research has demonstrated the importance of early family characteristics, such as the quality of caregiving, on children's later mental health. Information is, however, needed about the role of more holistic family systems and specific child-related socioemotional mechanisms. In this study, we conceptualize families as dynamic family system types, consisting of both marital and parenting trajectories over the transition to parenthood. First, we examine how early family system types predict children's anxiety, depression, peer exclusion, and emotion regulation. Second, we test whether couples' infertility history and other family related contextual factors moderate the effects of family system types on child outcomes. Third, we test whether children's emotion regulation and peer exclusion mediate the effects of family system types on anxiety and depression. The participants were 452 families representing cohesive, distant, authoritative, enmeshed, and discrepant family types, identified on the basis of relationship autonomy and intimacy from pregnancy to the child's age of 2 and 12 months. Children's anxiety, depression, emotion regulation, and peer exclusion were assessed at the age of 7-8 years. Structural equation modeling showed that distant, enmeshed, and discrepant families similarly predicted children's heightened anxiety and depression. Infertility history, parental education, and parity moderated the associations between certain family system types and child outcomes. Finally, emotion regulation, but not peer exclusion, was a common mediating mechanism between distant and enmeshed families and children's depression. The results emphasize the importance of early family environments on children's emotion regulation development and internalizing psychopathology. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Cross-layer Joint Relay Selection and Power Allocation Scheme for Cooperative Relaying System

NASA Astrophysics Data System (ADS)

Zhi, Hui; He, Mengmeng; Wang, Feiyue; Huang, Ziju

2018-03-01

A novel cross-layer joint relay selection and power allocation (CL-JRSPA) scheme over physical layer and data-link layer is proposed for cooperative relaying system in this paper. Our goal is finding the optimal relay selection and power allocation scheme to maximize system achievable rate when satisfying total transmit power constraint in physical layer and statistical delay quality-of-service (QoS) demand in data-link layer. Using the concept of effective capacity (EC), our goal can be formulated into an optimal joint relay selection and power allocation (JRSPA) problem to maximize the EC when satisfying total transmit power limitation. We first solving optimal power allocation (PA) problem with Lagrange multiplier approach, and then solving optimal relay selection (RS) problem. Simulation results demonstrate that CL-JRSPA scheme gets larger EC than other schemes when satisfying delay QoS demand. In addition, the proposed CL-JRSPA scheme achieves the maximal EC when relay located approximately halfway between source and destination, and EC becomes smaller when the QoS exponent becomes larger.

An Intergenerational Support System for Child Welfare Families.

ERIC Educational Resources Information Center

Harnett, Joan

1989-01-01

Describes a program developed by the Children's Aid Society of Montgomery County, Pennsylvania, called Intergenerational Support System (ISS), in which senior volunteers serve as support persons for problem families. (SAK)

Use of the Family Interaction Macro-coding System with Families of Adolescents: Psychometric Properties Among Pediatric and Healthy Populations

PubMed Central

Zebracki, Kathy; Kichler, Jessica C.; Fitzgerald, Christopher J.; Neff Greenley, Rachel; Alemzadeh, Ramin; Holmbeck, Grayson N.

2011-01-01

Objective To examine reliability and validity data for the Family Interaction Macro-coding System (FIMS) with adolescents with spina bifida (SB), adolescents with type 1 diabetes mellitus (T1DM), and healthy adolescents and their families. Methods Sixty-eight families of children with SB, 58 families of adolescents with T1DM, and 68 families in a healthy comparison group completed family interaction tasks and self-report questionnaires. Trained coders rated family interactions using the FIMS. Results Acceptable interrater and scale reliabilities were obtained for FIMS items and subscales. Observed FIMS parental acceptance, parental behavioral control, parental psychological control, family cohesion, and family conflict scores demonstrated convergent validity with conceptually similar self-report measures. Conclusions Preliminary evidence supports the use of the FIMS with families of youths with SB and T1DM and healthy youths. Future research on overall family functioning may be enhanced by use of the FIMS. PMID:21097956

Joint FACET: the Canada-Netherlands initiative to study multisensor data fusion systems

NASA Astrophysics Data System (ADS)

Bosse, Eloi; Theil, Arne; Roy, Jean; Huizing, Albert G.; van Aartsen, Simon

1998-09-01

This paper presents the progress of a collaborative effort between Canada and The Netherlands in analyzing multi-sensor data fusion systems, e.g. for potential application to their respective frigates. In view of the overlapping interest in studying and comparing applicability and performance and advanced state-of-the-art Multi-Sensor Data FUsion (MSDF) techniques, the two research establishments involved have decided to join their efforts in the development of MSDF testbeds. This resulted in the so-called Joint-FACET, a highly modular and flexible series of applications that is capable of processing both real and synthetic input data. Joint-FACET allows the user to create and edit test scenarios with multiple ships, sensor and targets, generate realistic sensor outputs, and to process these outputs with a variety of MSDF algorithms. These MSDF algorithms can also be tested using typical experimental data collected during live military exercises.

Joint Polar Satellite System (JPSS) Common Ground System (CGS) Technical Performance Measures of the Block 2 Architecture

NASA Astrophysics Data System (ADS)

Grant, K. D.; Panas, M.

2016-12-01

NOAA and NASA are jointly acquiring the next-generation civilian weather satellite system: the Joint Polar Satellite System (JPSS). JPSS replaced the afternoon orbit component and ground processing of NOAA's old POES system. JPSS satellites carry sensors that collect meteorological, oceanographic, climatological, and solar-geophysical observations of the earth, atmosphere, and space. The ground processing system for JPSS is known as the JPSS Common Ground System (JPSS CGS). Developed and maintained by Raytheon Intelligence, Information and Services (IIS), the CGS is a globally distributed, multi-mission system serving NOAA, NASA and their national and international partners. The CGS has demonstrated its scalability and flexibility to incorporate multiple missions efficiently and with minimal cost, schedule and risk, while strengthening global partnerships in weather and environmental monitoring. The CGS architecture has been upgraded to Block 2.0 to satisfy several key objectives, including: "operationalizing" the first satellite, Suomi NPP, which originally was a risk reduction mission; leveraging lessons learned in multi-mission support, taking advantage of newer, more reliable and efficient technologies and satisfying constraints due of the continually evolving budgetary environment. To ensure the CGS meets these needs, we have developed 48 Technical Performance Measures (TPMs) across 9 categories: Data Availability, Data Latency, Operational Availability, Margin, Scalability, Situational Awareness, Transition (between environments and sites), WAN Efficiency, and Data Recovery Processing. This paper will provide an overview of the CGS Block 2.0 architecture, with particular focus on the 9 TPM categories listed above. We will describe how we ensure the deployed architecture meets these TPMs to satisfy our multi-mission objectives with the deployment of Block 2.0.

Three thousand families: English Canada's colonizing vision and British family settlement, 1919-39.

PubMed

Mancuso, Rebecca J

2011-01-01

After the First World War, Canada's immigration policy became more restrictive and immigration more controlled. For English Canadians, immigration of the "right type" of people—those from the British Isles—remained vital to strengthening the nation. This article examines the 3,000 Family Scheme, a joint British-Canadian settlement project in which British families, comprised of over 18,000 individuals, were relocated to homesteads as colonizers of Canada's remote areas. There, many endured isolation and hardship, and were largely blamed for their own plight. A nation-building project that failed, the 3,000 Family Scheme reveals the connections among several enduring national myths in the interwar years: the potential for agricultural expansion, British superiority, and the capabilities of a maturing Canadian state to control the settlement process.

Influence of control parameters on the joint tracking performance of a coaxial weld vision system

NASA Technical Reports Server (NTRS)

Gangl, K. J.; Weeks, J. L.

1985-01-01

The first phase of a series of evaluations of a vision-based welding control sensor for the Space Shuttle Main Engine Robotic Welding System is described. The robotic welding system is presently under development at the Marshall Space Flight Center. This evaluation determines the standard control response parameters necessary for proper trajectory of the welding torch along the joint.

[Systemic family therapy in the context of Alzheimer's disease: a theoretical and practical approach].

PubMed

Cantegreil-Kallen, Inge; Rigaud, Anne-Sophie

2009-12-01

Alzheimer's disease has a negative impact on family relationships and may trigger conflicts between the main caregiver and other family members. The systemic approach evidences the impact of dementia on structural and functional characteristics of the family system. Systemic family therapy is especially indicated in crisis situations such as emergency hospitalization or institutionalization of the patient, and when the family members do not agree on when and how to introduce care and support services at the patient's home. In this case, the aim of the intervention is to restore the communication between all the family members in order to find an agreement for the best management of the patients. Since September 2006, systemic family therapy has been offered in the memory clinic of the Broca Hospital to families having a member suffering from Alzheimer's disease. The involvement of the families was accomplished by the direct participation of the patient, main caregiver (spouse), grown-up children and grandchildren. The aim was to obtain an agreement for the access of support and care services at home from all the family members. The intervention was based on a step-by-step procedure and comprehended five sessions. The primary results of a pilot study are presented.

A digital-signal-processor-based optical tomographic system for dynamic imaging of joint diseases

NASA Astrophysics Data System (ADS)

Lasker, Joseph M.

joint diseases, especially effects of rheumatoid arthritis (RA) in the proximal interphalangeal finger joints. Using a dual-wavelength tomographic imaging system and previously implemented reconstruction scheme, I have performed initial dynamic imaging case studies on healthy volunteers and patients diagnosed with RA. These studies support our hypothesis that differences in the vascular and metabolic reactivity exist between affected and unaffected joints and can be used for diagnostic purposes.

Validity of an ankle joint motion and position sense measurement system and its application in healthy subjects and patients with ankle sprain.

PubMed

Lin, Chueh-Ho; Chiang, Shang-Lin; Lu, Liang-Hsuan; Wei, Shun-Hwa; Sung, Wen-Hsu

2016-07-01

Ankle motion and proprioception in multiple axis movements are crucial for daily activities. However, few studies have developed and used a multiple axis system for measuring ankle motion and proprioception. This study was designed to validate a novel ankle haptic interface system that measures the ankle range of motion (ROM) and joint position sense in multiple plane movements, investigating the proprioception deficits during joint position sense tasks for patients with ankle instability. Eleven healthy adults (mean ± standard deviation; age, 24.7 ± 1.9 years) and thirteen patients with ankle instability were recruited in this study. All subjects were asked to perform tests to evaluate the validity of the ankle ROM measurements and underwent tests for validating the joint position sense measurements conducted during multiple axis movements of the ankle joint. Pearson correlation was used for validating the angular position measurements obtained using the developed system; the independent t test was used to investigate the differences in joint position sense task performance for people with or without ankle instability. The ROM measurements of the device were linearly correlated with the criterion standards (r = 0.99). The ankle instability and healthy groups were significantly different in direction, absolute, and variable errors of plantar flexion, dorsiflexion, inversion, and eversion (p < 0.05). The results demonstrate that the novel ankle joint motion and position sense measurement system is valid and can be used for measuring the ankle ROM and joint position sense in multiple planes and indicate proprioception deficits for people with ankle instability. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Enhancing residents' compassionate communication to family members: A family systems breaking bad news simulation.

PubMed

Williams-Reade, Jacqueline; Lobo, Elsie; Whittemore, Abel Arvizú; Parra, Laura; Baerg, Joanne

2018-05-28

Surgical residents often need to break bad news (BBN) to patients and family members. While communication skills are a core competency in residency training, these specific skills are rarely formally taught. We piloted a simulation training to teach pediatric surgical residents how to compassionately BBN of an unexpected, traumatic pediatric death to surviving family members. This training was unique in that it was influenced by family systems theory and was a collaborative effort between our institution's surgery residency and medical family therapy (MedFT) programs. This study provides outcomes of surgery residents' communication skills, attitudes, and self-perceptions after a BBN simulation activity with standardized family members at a major academic teaching hospital. Each resident participated in two 30-min simulations and received feedback from observers. Outcome data were collected through self-assessments completed before, immediately after, and 6 months after the simulation. Participants were 15 surgery residents, and MedFT students served as simulated family members and trainers. A statistically significant change with medium to large effect sizes in participant self-reported perceptions of skill and confidence were documented and maintained over 6 months. Responses to open-ended questions supported practice changes in response to the training. This collaborative training promoted significant improvement in resident compassionate communication skills. The curriculum was highly valued by the learners and resulted in sustained application of learned skills with patients and families. Our novel approach was feasible with promising results that warrant further investigation and could be reproduced in other institutions with similar programs. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Considering a family systems approach to surrogate decision-making.

PubMed

Vig, Elizabeth K; Taylor, Janelle S; O'Hare, Ann M

2017-03-01

Comments on the original article by Rolland, Emanuel, and Torke (see record 2017-05300-001) regarding a family systems approach to medical decision-making by proxy. The authors expanded the focus of clinicians beyond the patient to a more comprehensive understanding of the patient's family. They assert that a better understanding of family dynamics may help clinicians to engage with families more effectively when decision-making is needed for seriously ill loved ones, and may lessen the emotional challenges families and clinicians face when decisions are needed. However, the current authors point out surrogate decision-making can be an onerous responsibility. Rolland, Emanuel, and Torke identify the growing body of research on the high prevalence of posttraumatic stress disorder, anxiety, and depression among those who have been in the position of making medical decisions for loved ones. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Bones, Muscles, and Joints: The Musculoskeletal System

MedlinePlus

... Staying Safe Videos for Educators Search English Español Bones, Muscles, and Joints KidsHealth / For Parents / Bones, Muscles, ... able to stand, walk, run, or even sit. Bones and What They Do From our head to ...

Bones, Muscles, and Joints: The Musculoskeletal System

MedlinePlus

... Staying Safe Videos for Educators Search English Español Bones, Muscles, and Joints KidsHealth / For Teens / Bones, Muscles, ... to do everyday physical activities. What Are the Bones and What Do They Do? The human skeleton ...

Joint Fire Support

DTIC Science & Technology

2010-06-30

intelligence application package for theater battle management core system ( TBMCS ) functionality at wing and squadron levels. The automated four... TBMCS , Joint Surveillance and Target Attack Radar System (Ground Control Station), and Global Command and Control System, as well as with Allied FA...The TBMCS is a force level integrated air C2 system. TBMCS provides hardware, software, and communications interfaces to support the preparation

Neural network expert system for X-ray analysis of welded joints

NASA Astrophysics Data System (ADS)

Kozlov, V. V.; Lapik, N. V.; Popova, N. V.

2018-03-01

The use of intelligent technologies for the automated analysis of product quality is one of the main trends in modern machine building. At the same time, rapid development in various spheres of human activity is experienced by methods associated with the use of artificial neural networks, as the basis for building automated intelligent diagnostic systems. Technologies of machine vision allow one to effectively detect the presence of certain regularities in the analyzed designation, including defects of welded joints according to radiography data.

A Research Framework for Understanding the Practical Impact of Family Involvement in the Juvenile Justice System: The Juvenile Justice Family Involvement Model.

PubMed

Walker, Sarah Cusworth; Bishop, Asia S; Pullmann, Michael D; Bauer, Grace

2015-12-01

Family involvement is recognized as a critical element of service planning for children's mental health, welfare and education. For the juvenile justice system, however, parents' roles in this system are complex due to youths' legal rights, public safety, a process which can legally position parents as plaintiffs, and a historical legacy of blaming parents for youth indiscretions. Three recent national surveys of juvenile justice-involved parents reveal that the current paradigm elicits feelings of stress, shame and distrust among parents and is likely leading to worse outcomes for youth, families and communities. While research on the impact of family involvement in the justice system is starting to emerge, the field currently has no organizing framework to guide a research agenda, interpret outcomes or translate findings for practitioners. We propose a research framework for family involvement that is informed by a comprehensive review and content analysis of current, published arguments for family involvement in juvenile justice along with a synthesis of family involvement efforts in other child-serving systems. In this model, family involvement is presented as an ascending, ordinal concept beginning with (1) exclusion, and moving toward climates characterized by (2) information-giving, (3) information-eliciting and (4) full, decision-making partnerships. Specific examples of how courts and facilities might align with these levels are described. Further, the model makes predictions for how involvement will impact outcomes at multiple levels with applications for other child-serving systems.

Father- and Mother-Adolescent Decision-Making in Mexican-Origin Families

PubMed Central

Perez-Brena, Norma; Updegraff, Kimberly A.; Umaña-Taylor, Adriana J.

2013-01-01

Understanding the prevalence and correlates of decisional autonomy within specific cultural contexts is necessary to fully understand how family processes are embedded within culture. The goals of this study were to describe mothers’ and fathers’ decision-making with adolescents (M = 12.51 years, SD = 0.58; 51% female), including parent-unilateral, joint, and youth-unilateral decision-making, and to examine the socio-cultural and family characteristics associated with these different types of decision-making in 246 Mexican-origin families. Mothers reported more joint and youth-unilateral decision-making and less parent-unilateral decision-making than did fathers. Fathers reported more youth-unilateral decision-making with sons than with daughters. Further, for mothers, more traditional gender role attitudes and higher levels of mother-adolescent conflict were associated with more parent-unilateral and less joint decision-making. In contrast, for fathers, lower levels of respect values were associated with more youth-unilateral decision-making with sons, and higher levels of parent-adolescent warmth was associated with more youth-unilateral decision-making with daughters. The importance of understanding the different correlates of mothers’ and fathers’ decision-making with sons versus daughters is discussed. PMID:21484288

Loyalty Conflicts and Family Relationships in Latency Age Boys: A Comparison of Joint and Maternal Custody.

ERIC Educational Resources Information Center

Shiller, Virginia M.

1986-01-01

Examined divorce-related emotional adjustment in boys aged 6-11 living in maternal (N=20) or joint (N=20) physical custody. Found no group differences in child-administered loyalty conflict measure. Results indicated that boys in joint custody were comfortable expressing negative and positive feelings toward parents, were not preoccupied with…

Control of joint motion simulators for biomechanical research

NASA Technical Reports Server (NTRS)

Colbaugh, R.; Glass, K.

1992-01-01

The authors present a hierarchical adaptive algorithm for controlling upper extremity human joint motion simulators. A joint motion simulator is a computer-controlled, electromechanical system which permits the application of forces to the tendons of a human cadaver specimen in such a way that the cadaver joint under study achieves a desired motion in a physiologic manner. The proposed control scheme does not require knowledge of the cadaver specimen dynamic model, and solves on-line the indeterminate problem which arises because human joints typically possess more actuators than degrees of freedom. Computer simulation results are given for an elbow/forearm system and wrist/hand system under hierarchical control. The results demonstrate that any desired normal joint motion can be accurately tracked with the proposed algorithm. These simulation results indicate that the controller resolved the indeterminate problem redundancy in a physiologic manner, and show that the control scheme was robust to parameter uncertainty and to sensor noise.

Concurrent validation of Xsens MVN measurement of lower limb joint angular kinematics.

PubMed

Zhang, Jun-Tian; Novak, Alison C; Brouwer, Brenda; Li, Qingguo

2013-08-01

This study aims to validate a commercially available inertial sensor based motion capture system, Xsens MVN BIOMECH using its native protocols, against a camera-based motion capture system for the measurement of joint angular kinematics. Performance was evaluated by comparing waveform similarity using range of motion, mean error and a new formulation of the coefficient of multiple correlation (CMC). Three dimensional joint angles of the lower limbs were determined for ten healthy subjects while they performed three daily activities: level walking, stair ascent, and stair descent. Under all three walking conditions, the Xsens system most accurately determined the flexion/extension joint angle (CMC > 0.96) for all joints. The joint angle measurements associated with the other two joint axes had lower correlation including complex CMC values. The poor correlation in the other two joint axes is most likely due to differences in the anatomical frame definition of limb segments used by the Xsens and Optotrak systems. Implementation of a protocol to align these two systems is necessary when comparing joint angle waveforms measured by the Xsens and other motion capture systems.

[Fetal bone and joint disorders].

PubMed

Jakobovits, Akos

2008-12-21

The article discusses the physiology and pathology of fetal bone and joint development and functions. The bones provide static support for the body. The skull and the bones of spinal column encase the central and part of the peripheral nervous system. The ribs and the sternum shield the heart and the lungs, while the bones of the pelvis protect the intraabdominal organs. Pathological changes of these bony structures may impair the functions of the respective systems or internal organs. Movements of the bones are brought about by muscles. The deriving motions are facilitated by joints. Bony anomalies of the extremities limit their effective functions. Apart from skeletal and joint abnormalities, akinesia may also be caused by neurological, muscular and skin diseases that secondarily affect the functions of bones and joints. Such pathological changes may lead to various degrees of physical disability and even to death. Some of the mentioned anomalies are recognizable in utero by ultrasound. The diagnosis may serve as medical indication for abortion in those instances when the identified abnormality is incompatible with independent life.

Self-aligning exoskeleton hip joint: Kinematic design with five revolute, three prismatic and one ball joint.

PubMed

Beil, Jonas; Marquardt, Charlotte; Asfour, Tamim

2017-07-01

Kinematic compatibility is of paramount importance in wearable robotic and exoskeleton design. Misalignments between exoskeletons and anatomical joints of the human body result in interaction forces which make wearing the exoskeleton uncomfortable and even dangerous for the human. In this paper we present a kinematically compatible design of an exoskeleton hip to reduce kinematic incompatibilities, so called macro- and micro-misalignments, between the human's and exoskeleton's joint axes, which are caused by inter-subject variability and articulation. The resulting design consists of five revolute, three prismatic and one ball joint. Design parameters such as range of motion and joint velocities are calculated based on the analysis of human motion data acquired by motion capture systems. We show that the resulting design is capable of self-aligning to the human hip joint in all three anatomical planes during operation and can be adapted along the dorsoventral and mediolateral axis prior to operation. Calculation of the forward kinematics and FEM-simulation considering kinematic and musculoskeletal constraints proved sufficient mobility and stiffness of the system regarding the range of motion, angular velocity and torque admissibility needed to provide 50 % assistance for an 80 kg person.

Enhanced control of a flexure-jointed micromanipulation system using a vision-based servoing approach

NASA Astrophysics Data System (ADS)

Chuthai, T.; Cole, M. O. T.; Wongratanaphisan, T.; Puangmali, P.

2018-01-01

This paper describes a high-precision motion control implementation for a flexure-jointed micromanipulator. A desktop experimental motion platform has been created based on a 3RUU parallel kinematic mechanism, driven by rotary voice coil actuators. The three arms supporting the platform have rigid links with compact flexure joints as integrated parts and are made by single-process 3D printing. The mechanism overall size is approximately 250x250x100 mm. The workspace is relatively large for a flexure-jointed mechanism, being approximately 20x20x6 mm. A servo-control implementation based on pseudo-rigid-body models (PRBM) of kinematic behavior combined with nonlinear-PID control has been developed. This is shown to achieve fast response with good noise-rejection and platform stability. However, large errors in absolute positioning occur due to deficiencies in the PRBM kinematics, which cannot accurately capture flexure compliance behavior. To overcome this problem, visual servoing is employed, where a digital microscopy system is used to directly measure the platform position by image processing. By adopting nonlinear PID feedback of measured angles for the actuated joints as inner control loops, combined with auxiliary feedback of vision-based measurements, the absolute positioning error can be eliminated. With controller gain tuning, fast dynamic response and low residual vibration of the end platform can be achieved with absolute positioning accuracy within ±1 micron.

Fifty moves a year: is there an association between joint physical custody and psychosomatic problems in children?

PubMed

Bergström, Malin; Fransson, Emma; Modin, Bitte; Berlin, Marie; Gustafsson, Per A; Hjern, Anders

2015-08-01

In many Western countries, an increasing number of children with separated parents have joint physical custody, that is, live equally much in their parent's respective homes. In Sweden, joint physical custody is particularly common and concerns between 30% and 40% of the children with separated parents. It has been hypothesised that the frequent moves and lack of stability in parenting may be stressful for these children. We used data from a national classroom survey of all sixth and ninth grade students in Sweden (N=147839) to investigate the association between children's psychosomatic problems and living arrangements. Children in joint physical custody were compared with those living only or mostly with one parent and in nuclear families. We conducted sex-specific linear regression analyses for z-transformed sum scores of psychosomatic problems and adjusted for age, country of origin as well as children's satisfaction with material resources and relationships to parents. Clustering by school was accounted for by using a two-level random intercept model. Children in joint physical custody suffered from less psychosomatic problems than those living mostly or only with one parent but reported more symptoms than those in nuclear families. Satisfaction with their material resources and parent-child relationships was associated with children's psychosomatic health but could not explain the differences between children in the different living arrangements. Children with non-cohabitant parents experience more psychosomatic problems than those in nuclear families. Those in joint physical custody do however report better psychosomatic health than children living mostly or only with one parent. Longitudinal studies with information on family factors before and after the separation are needed to inform policy of children's postseparation living arrangements. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence

Service Integration: Challenging Systems To Meet Families' Needs.

ERIC Educational Resources Information Center

Ward, Elie

This report offers an evaluation of services for families in New York State, finds that system is in chaos, and proposes a 5-year commitment to integrate programs and funding in six agencies. The report finds that billions of federal, state, local, and private dollars are committed annually to support separate service systems with no imperative…

Integrated Data Modeling and Simulation on the Joint Polar Satellite System Program

NASA Technical Reports Server (NTRS)

Roberts, Christopher J.; Boyce, Leslye; Smith, Gary; Li, Angela; Barrett, Larry

2012-01-01

The Joint Polar Satellite System is a modern, large-scale, complex, multi-mission aerospace program, and presents a variety of design, testing and operational challenges due to: (1) System Scope: multi-mission coordination, role, responsibility and accountability challenges stemming from porous/ill-defined system and organizational boundaries (including foreign policy interactions) (2) Degree of Concurrency: design, implementation, integration, verification and operation occurring simultaneously, at multiple scales in the system hierarchy (3) Multi-Decadal Lifecycle: technical obsolesce, reliability and sustainment concerns, including those related to organizational and industrial base. Additionally, these systems tend to become embedded in the broader societal infrastructure, resulting in new system stakeholders with perhaps different preferences (4) Barriers to Effective Communications: process and cultural issues that emerge due to geographic dispersion and as one spans boundaries including gov./contractor, NASA/Other USG, and international relationships.

Social protection systems in vulnerable families: their importance for the public health

PubMed Central

Arcos, Estela; Sanchez, Ximena; Toffoletto, Maria Cecilia; Baeza, Margarita; Gazmuri, Patricia; Muñoz, Luz Angélica; Vollrath, Antonia

2014-01-01

OBJECTIVE To analyze the effectiveness of the Chilean System of Childhood Welfare in transferring benefits to socially vulnerable families. METHODS A cross-sectional study with a sample of 132 families from the Metropolitan Region, Chile, stratified according to degree of social vulnerability, between September 2011 and January 2012. Semi-structured interviews were conducted with mothers of the studied families in public health facilities or their households. The variables studied were family structure, psychosocial risk in the family context and integrated benefits from the welfare system in families that fulfill the necessary requirements for transfer of benefits. Descriptive statistics to measure location and dispersion were calculated. A binary logistic regression, which accounts for the sample size of the study, was carried out. RESULTS The groups were homogenous regarding family size, the presence of biological father in the household, the number of relatives living in the same dwelling, income generation capacity and the rate of dependency and psychosocial risk (p ≥ 0.05). The transfer of benefits was low in all three groups of the sample (≤ 23.0%). The benefit with the best coverage in the system was the Single Family Subsidy, whose transfer was associated with the size of the family, the presence of relatives in the dwelling, the absence of the father in the household, a high rate of dependency and a high income generation capacity (p ≤ 0.10). CONCLUSIONS The effectiveness of benefit transfer was poor, especially in families that were extremely socially vulnerable. Further explanatory studies of benefit transfers to the vulnerable population, of differing intensity and duration, are required in order to reduce health disparities and inequalities. PMID:25119935

Why involve families in acute mental healthcare? A collaborative conceptual review

PubMed Central

Sandhu, Sima; Giacco, Domenico; Barrett, Katherine; Bennison, Gerry; Collinson, Sue; Priebe, Stefan

2017-01-01

Objectives Family involvement is strongly recommended in clinical guidelines but suffers from poor implementation. To explore this topic at a conceptual level, a multidisciplinary review team including academics, clinicians and individuals with lived experience undertook a review to explore the theoretical background of family involvement models in acute mental health treatment and how this relates to their delivery. Design A conceptual review was undertaken, including a systematic search and narrative synthesis. Included family models were mapped onto the most commonly referenced underlying theories: the diathesis–stress model, systems theories and postmodern theories of mental health. Common components of the models were summarised and compared. Lastly, a thematic analysis was undertaken to explore the role of patients and families in the delivery of the approaches. Setting General adult acute mental health treatment. Results Six distinct family involvement models were identified: Calgary Family Assessment and Intervention Models, ERIC (Equipe Rapide d’Intervention de Crise), Family Psychoeducation Models, Family Systems Approach, Open Dialogue and the Somerset Model. Findings indicated that despite wide variation in the theoretical models underlying family involvement models, there were many commonalities in their components, such as a focus on communication, language use and joint decision-making. Thematic analysis of the role of patients and families identified several issues for implementation. This included potential harms that could emerge during delivery of the models, such as imposing linear ‘patient–carer’ relationships and the risk of perceived coercion. Conclusions We conclude that future staff training may benefit from discussing the chosen family involvement model within the context of other theories of mental health. This may help to clarify the underlying purpose of family involvement and address the diverse needs and world views of

Joint Improvised Explosive Device Defeat Organization Annual Report 2010

DTIC Science & Technology

2010-01-01

Fox is an effort to characterize a COTS, man-portable, radiography system exceeding current EOD radiography penetration capabilities. Gray Fox... rocket propelled grenades at a reduced weight compared to currently available armor solutions. Sentinel Scout. This developmental appliqué kit is...Dismounted System Joint Electronic warfare Cour&e Joint Total Entity Tracking for the Instrumented Battlefield Joint Readinoss Training Contor

Japan - USSR joint emulsion chamber experiment at Pamir

NASA Technical Reports Server (NTRS)

1985-01-01

The results are presented for the systematic measurement of cosmic ray showers in the first carbon chamber of Japan-USSR joint experiment at Pamir Plateau. The intensity and the energy distribution of electromagnetic particles, of hadrons and of families are in good agreement with the results of other mountain experiment if the relative error in energy estimation is taken into consideration.

Interactions Between Family and Day Care Systems. Final Technical Report.

ERIC Educational Resources Information Center

Romero, Det; And Others

This research report studied the relationship between families and day care centers as systems. Three levels of subjects were investigated: 23 day care centers in Lansing, Michigan, day care staffs and families of children enrolled. Three questionnaires were developed to obtain data on demographic and attitudinal variables. A director's…

14 CFR 25.693 - Joints.

Code of Federal Regulations, 2013 CFR

2013-01-01

... system joints (in push-pull systems) that are subject to angular motion, except those in ball and roller... in cable control systems. For ball or roller bearings, the approved ratings may not be exceeded...

Systems effects on family planning innovativeness.

PubMed

Lee, S B

1983-12-01

Data from Korea were used to explore the importance of community level variables in explaining family planning adoption at the individual level. An open system concept was applied, assuming that individual family planning behavior is influenced by both environmental and individual factors. The environmental factors were measured at the village level and designated as community characteristics. The dimension of communication network variables was introduced. Each individual was characterized in terms of the degree of her involvement in family planning communication with others in her village. It was assumed that the nature of the communication network linking individuals with each other effects family planning adoption at the individual level. Specific objectives were to determine 1) the relative importance of the specific independent variables in explaining family planning adoption and 2) the relative importance of the community level variables in comparison with the individual level variables in explaining family planning adoption at the individual level. The data were originally gathered in a 1973 research project on Korea's mothers' clubs. 1047 respondents were interviewed, comprising all married women in 25 sample villages having mothers' clubs. The dependent variable was family planning adoption behavior, defined as current use of any of the modern methods of family planning. The independent variables were defined at 3 levels: individual, community, and at a level intermediate between them involving communication links between individuals. More of the individual level independent variables were significantly correlated with the dependent variables than the community level variables. Among those variables with statistically significant correlations, the correlation coefficients were consistently higher for the individual level than for the community level variables. More of the variance in the dependent variable was explained by individual level than by

Joint trajectories of depression and perfectionism across adolescence and childhood risk factors.

PubMed

Vaillancourt, Tracy; Haltigan, John D

2018-05-01

The codevelopment of symptoms of depression and socially prescribed perfectionism across adolescence (age 12-17) and non-age-overlapping childhood predictors (age 10-11) of joint trajectory group membership were examined in a sample of 700 Canadian youth. Results indicated that most adolescents (75.8%) followed a trajectory of low depression symptoms (low stable), whereas 15.7% followed an increasing trajectory (increasing), and 8.5% followed a trajectory that began high and decreased over time (high decreasing). More girls than boys were found in the increasing and high decreasing depression trajectories. Adolescents followed three distinct trajectories of socially prescribed perfectionism: 41.6% were in a low stable group, 40.5% in a moderate increasing group, and 17.9% in a high increasing group. Eight percent followed a high-risk dual trajectory of increasing depression and high increasing socially prescribed perfectionism. This joint trajectory was predicted by being bullied, anxious, and relationally aggressive (compared to the low-risk trajectory of low stable depression and perfectionism) at ages 10 and 11. These same predictors, along with poorer family functioning and lower family income, differentiated the joint high decreasing depression/high increasing perfectionism group from the low/low joint group, which comprised of 3.8% of the sample. The developmental progression was best characterized as depression leading to socially prescribed perfectionism. Implications for clinical practice are discussed.

[Operative treatment of sacroiliac joint fracture and dislocation in Tile C pelvic fracture with Colorado 2 system].

PubMed

Liu, Shuping; Zhou, Qing; Liu, Yuehong; Chen, Xi; Zhou, Yu; Zhang, Desheng; Fang, Zhi; Xu, Wei

2011-12-01

To explore the effectiveness of Colorado 2 system in the stability reconstruction of sacroiliac joint fracture and dislocation in Tile C pelvic fracture. Between February 2009 and January 2011, 8 cases of Tile C pelvic fracture were treated with Colorado 2 system. There were 3 males and 5 females with an average age of 34.4 years (range, 22-52 years). Fractures were caused by traffic accident in 3 cases, by falling from height in 3 cases, and by crash of heavy object in 2 cases. According to Tile classification, 5 cases were classified as C1-2, 2 cases as C1-3, and 1 case as C2. The time between injury and operation was 5-10 days (mean, 7 days). After skeletal traction reduction, Colorado 2 system was used to fix sacroiliac joint, and reconstruction plate or external fixation was selectively adopted. The postoperative X-ray films showed that the reduction of vertical and rotatory dislocation was satisfactory, posterior pelvic ring achieved effective stability. All the incisions healed by first intention, and no blood vessel or nerve injury occurred. Eight patients were followed up 6-24 months (mean, 12 months). No loosening or breakage of internal fixation was observed and no re-dislocation of sacroiliac joint occurred. The bone healing time was 6-12 months (mean, 9 months). According to Majeed's functional criterion, the results were excellent in 5 cases, good in 2 cases, and fair in 1 case at last follow-up. Colorado 2 system could provide immediate stability of pelvic posterior ring and good maintenance of reduction effect, which is an effective method in the therapy of sacroiliac joint fracture and dislocation in Tile C pelvic fracture.

Social Constructionist Family Systems Research: Conceptual Considerations

ERIC Educational Resources Information Center

Puig, Ana; Koro-Ljungberg, Mirka; Echevarria-Doan, Silvia

2008-01-01

The purpose of this article is to illustrate how theory and particularly the theoretical perspective of social constructionism can influence the ways in which scholars conduct qualitative research studies in the area of family systems. The authors argue for the importance of theory in qualitative research projects and promote researchers' clear…

Secondary Victimization: Domestic Violence Survivors Navigating the Family Law System.

PubMed

Laing, Lesley

2016-08-23

This qualitative study explored the experiences of 22 domestic violence survivors attempting to negotiate safe post-separation parenting arrangements through the Australian family law system. Their allegations of violence put them at odds with a system that values mediated settlements and shared parenting. Skeptical responses, accusations of parental alienation, and pressure to agree to unsafe arrangements exacerbated the effects of post-separation violence. Core themes in the women's narratives of engagement with the family law system-silencing, control, and undermining the mother-child relationship-mirrored domestic violence dynamics, suggesting the concept of secondary victimization as a useful lens for understanding their experiences. © The Author(s) 2016.

Pressure-actuated joint system

NASA Technical Reports Server (NTRS)

McGuire, John R. (Inventor)

2004-01-01

A pressure vessel is provided that includes first and second case segments mated with one another. First and second annular rubber layers are disposed inboard of the first and second case segments, respectively. The second annular rubber layer has a slot extending from the radial inner surface across a portion of its thickness to define a main body portion and a flexible portion. The flexible portion has an interfacing surface portion abutting against an interfacing surface portion of the first annular rubber layer to follow movement of the first annular rubber layer during operation of the pressure vessel. The slot receives pressurized gas and establishes a pressure-actuated joint between the interfacing surface portions. At least one of the interfacing surface portions has a plurality of enclosed and sealed recesses formed therein.

33 CFR 183.554 - Fittings, joints, and connections.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Fuel Systems Manufacturer Requirements § 183.554 Fittings, joints, and connections. Each fuel system fitting, joint, and connection must be arranged so that it can be reached for inspection, removal, or maintenance without removal of permanent boat structure. ...

Do family environment factors play a role in adolescents' involvement in organized activities?

PubMed

Badura, Petr; Madarasova Geckova, Andrea; Sigmundova, Dagmar; Sigmund, Erik; van Dijk, Jitse P; Reijneveld, Sijmen A

2017-08-01

The study assessed the association of family environment factors with adolescents' participation in organized leisure-time activities (OLTA). We used data on 10,472 Czech adolescents aged 11-15 years (49.2% boys) from the 2013/2014 Health Behaviour in School-aged Children study. The associations of family support, the presence of parental screen-time rules and joint family activities with participation in at least one OLTA were assessed using logistic regression. High family support and the presence of parental screen-time rules were associated with higher odds of OLTA participation. Moreover, adolescents playing sports, indoor games and going for walks with their families at least weekly were more likely to participate in OLTA. Conversely, those spending time in joint family TV/video watching on most days were less likely to do so. A supportive family environment and direct parental involvement in their adolescent children's leisure are associated with OLTA participation in early to middle adolescence. Copyright © 2017 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.

The Family in Us: Family History, Family Identity and Self-Reproductive Adaptive Behavior.

PubMed

Ferring, Dieter

2017-06-01

This contribution is an essay about the notion of family identity reflecting shared significant experiences within a family system originating a set of signs used in social communication within and between families. Significant experiences are considered as experiences of events that have an immediate impact on the adaptation of the family in a given socio-ecological and cultural context at a given historical time. It is assumed that family history is stored in a shared "family memory" holding both implicit and explicit knowledge and exerting an influence on the behavior of each family member. This is described as transgenerational family memory being constituted of a system of meaningful signs. The crucial dimension underlying the logic of this essay are the ideas of adaptation as well as self-reproduction of systems.

Functional disorders of the temporomandibular joints: Internal derangement of the temporomandibular joint.

PubMed

Chang, Chih-Ling; Wang, Ding-Han; Yang, Mu-Chen; Hsu, Wun-Eng; Hsu, Ming-Lun

2018-04-01

Temporomandibular joint (TMJ) is one of the most complex joints of the human body. Due to its unique movement, in terms of combination of rotation and translator movement, disc of the joint plays an important role to maintain its normal function. In order to sustain the normal function of the TMJ, disc must be kept in proper position as well as maintain normal shape in all circumstances. Once the disc is not any more in its normal position during function of the joint, disturbance of the joint can be occurred which will lead to subsequent distortion of the disc. Shape of the disc can be influenced by many factors i.e.: abnormal function or composition of the disc itself. Etiology of the internal derangement of the disc remains controversial. Multifactorial theory has been postulated in most of previous manuscripts. Disc is composed of mainly extracellular matrix. Abnormal proportion of collagen type I & III may also leads to joint hypermobility which may be also a predisposing factor of this disorder. Thus it can be recognized as local manifestation of a systemic disorder. Different treatment modalities with from conservative treatment to surgical intervention distinct success rate have been reported. Recently treatment with extracellular matrix injection becomes more and more popular to strengthen the joint itself. Since multifactorial in character, the best solution of the treatment modalities should be aimed to resolve possible etiology from different aspects. Team work may be indication to reach satisfied results. Copyright © 2018. Published by Elsevier Taiwan.

A Network and Visual Quality Aware N-Screen Content Recommender System Using Joint Matrix Factorization

PubMed Central

Ullah, Farman; Sarwar, Ghulam; Lee, Sungchang

2014-01-01

We propose a network and visual quality aware N-Screen content recommender system. N-Screen provides more ways than ever before to access multimedia content through multiple devices and heterogeneous access networks. The heterogeneity of devices and access networks present new questions of QoS (quality of service) in the realm of user experience with content. We propose, a recommender system that ensures a better visual quality on user's N-screen devices and the efficient utilization of available access network bandwidth with user preferences. The proposed system estimates the available bandwidth and visual quality on users N-Screen devices and integrates it with users preferences and contents genre information to personalize his N-Screen content. The objective is to recommend content that the user's N-Screen device and access network are capable of displaying and streaming with the user preferences that have not been supported in existing systems. Furthermore, we suggest a joint matrix factorization approach to jointly factorize the users rating matrix with the users N-Screen device similarity and program genres similarity. Finally, the experimental results show that we also enhance the prediction and recommendation accuracy, sparsity, and cold start issues. PMID:24982999

Converging flow joint insert system at an intersection between adjacent transitions extending between a combustor and a turbine assembly in a gas turbine engine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brooks, Robert T.

A transition duct system (100) for routing a gas flow from a combustor (102) to the first stage (104) of a turbine section (106) in a combustion turbine engine (108), wherein the transition duct system (100) includes one or more converging flow joint inserts (120) forming a trailing edge (122) at an intersection (124) between adjacent transition ducts (126, 128) is disclosed. The transition duct system (100) may include a transition duct (126, 128) having an internal passage (130) extending between an inlet (132, 184) to an outlet (134, 186) and may expel gases into the first stage turbine (104)more » with a tangential component. The converging flow joint insert (120) may be contained within a converging flow joint insert receiver (136) and disconnected from the transition duct bodies (126, 128) by which the converging flow joint insert (120) is positioned. Being disconnected eliminates stress formation within the converging flow joint insert (120), thereby enhancing the life of the insert. The converging flow joint insert (120) may be removable such that the insert (120) can be replaced once worn beyond design limits.« less

Joint channel estimation and multi-user detection for multipath fading channels in DS-CDMA systems

NASA Astrophysics Data System (ADS)

Wu, Sau-Hsuan; Kuo, C.-C. Jay

2002-11-01

The technique of joint blind channel estimation and multiple access interference (MAI) suppression for an asynchronous code-division multiple-access (CDMA) system is investigated in this research. To identify and track dispersive time-varying fading channels and to avoid the phase ambiguity that come with the second-order statistic approaches, a sliding-window scheme using the expectation maximization (EM) algorithm is proposed. The complexity of joint channel equalization and symbol detection for all users increases exponentially with system loading and the channel memory. The situation is exacerbated if strong inter-symbol interference (ISI) exists. To reduce the complexity and the number of samples required for channel estimation, a blind multiuser detector is developed. Together with multi-stage interference cancellation using soft outputs provided by this detector, our algorithm can track fading channels with no phase ambiguity even when channel gains attenuate close to zero.

Homogeneous (Cu, Ni)6Sn5 intermetallic compound joints rapidly formed in asymmetrical Ni/Sn/Cu system using ultrasound-induced transient liquid phase soldering process.

PubMed

Li, Z L; Dong, H J; Song, X G; Zhao, H Y; Tian, H; Liu, J H; Feng, J C; Yan, J C

2018-04-01

Homogeneous (Cu, Ni) 6 Sn 5 intermetallic compound (IMC) joints were rapidly formed in asymmetrical Ni/Sn/Cu system by an ultrasound-induced transient liquid phase (TLP) soldering process. In the traditional TLP soldering process, the intermetallic joints formed in Ni/Sn/Cu system consisted of major (Cu, Ni) 6 Sn 5 and minor Cu 3 Sn IMCs, and the grain morphology of (Cu, Ni) 6 Sn 5 IMCs subsequently exhibited fine rounded, needlelike and coarse rounded shapes from the Ni side to the Cu side, which was highly in accordance with the Ni concentration gradient across the joints. However, in the ultrasound-induced TLP soldering process, the intermetallic joints formed in Ni/Sn/Cu system only consisted of the (Cu, Ni) 6 Sn 5 IMCs which exhibited an uniform grain morphology of rounded shape with a remarkably narrowed Ni concentration gradient. The ultrasound-induced homogeneous intermetallic joints exhibited higher shear strength (61.6 MPa) than the traditional heterogeneous intermetallic joints (49.8 MPa). Copyright © 2017 Elsevier B.V. All rights reserved.

Articular manifestations of familial hypercholesterolaemia.

PubMed Central

Mathon, G; Gagné, C; Brun, D; Lupien, P J; Moorjani, S

1985-01-01

Familial hypercholesterolaemia is characterised by a decreased removal of low density lipoproteins and premature coronary artery disease. Tendinous xanthomata are a hallmark of the disease. The affected joints may also be the sites of inflammation and pain. Arthropathy has been associated mainly with the homozygous form of familial hypercholesterolaemia, but it is also known to occur in the heterozygous form. We report on the articular manifestations in 73 patients with heterozygous familial hypercholesterolaemia. About 40% of these patients had at least one episode of articular symptoms. The observed articular manifestations may be classified into four types: Achilles pain (18%), Achilles tendinitis (11%), oligoarticular arthritis (7%), polyarticular or rheumatic fever-like arthritis (4%). It is concluded that in heterozygous familial hypercholesterolaemia articular manifestations are frequent, diverse, and may be the first symptom of this metabolic disorder. Images PMID:4037885

Integrating Social-Contextual and Intrapersonal Mechanisms of "Maturing Out": Joint Influences of Familial-Role Transitions and Personality Maturation on Problem-Drinking Reductions.

PubMed

Lee, Matthew R; Ellingson, Jarrod M; Sher, Kenneth J

2015-09-01

"Maturing out" of problem drinking is associated with both role transitions (e.g., getting married) and personality development. However, little is known concerning how these 2 mechanisms jointly influence problem-drinking desistance. This study investigated whether salutary effects of role transitions and personality occur at different points in young-adult development and whether they mediate one another's effects. Participants were initially recruited as first-year undergraduates, with family history of alcoholism overrepresented by design (N = 489). Using 4 waves of data at roughly ages 21, 25, 29, and 34, cross-lagged panel models estimated prospective relations among familial-role transitions (marriage or parenthood), personality (disinhibition, conscientiousness, and neuroticism), and problem drinking. Mixed support was found for the prediction of roles being more strongly associated with earlier maturing out of problem drinking and personality being more strongly associated with later maturing out. Regarding mediation, no evidence was found for the expectation that role effects would be mediated by personality. However, results did support mediation of personality effects by role transitions. Specifically, lower disinhibition and higher conscientiousness in emerging adulthood predicted role adoption, which, in turn, predicted later problem-drinking reductions. Family history of alcoholism also distally influenced these mediation processes. The differential timing of role and personality effects is consistent with the notion of decreasing contextual influences and increasing intrapersonal influences across development. In light of role incompatibility theory, results suggest that, over the course of development, the association of familial roles with problem drinking may increasingly reflect problem-drinking effects on role entry (i.e., role selection) and decreasingly reflect role entry effects on problem drinking (i.e., role socialization). As emerging

Vision-based real-time position control of a semi-automated system for robot-assisted joint fracture surgery.

PubMed

Dagnino, Giulio; Georgilas, Ioannis; Tarassoli, Payam; Atkins, Roger; Dogramadzi, Sanja

2016-03-01

Joint fracture surgery quality can be improved by robotic system with high-accuracy and high-repeatability fracture fragment manipulation. A new real-time vision-based system for fragment manipulation during robot-assisted fracture surgery was developed and tested. The control strategy was accomplished by merging fast open-loop control with vision-based control. This two-phase process is designed to eliminate the open-loop positioning errors by closing the control loop using visual feedback provided by an optical tracking system. Evaluation of the control system accuracy was performed using robot positioning trials, and fracture reduction accuracy was tested in trials on ex vivo porcine model. The system resulted in high fracture reduction reliability with a reduction accuracy of 0.09 mm (translations) and of [Formula: see text] (rotations), maximum observed errors in the order of 0.12 mm (translations) and of [Formula: see text] (rotations), and a reduction repeatability of 0.02 mm and [Formula: see text]. The proposed vision-based system was shown to be effective and suitable for real joint fracture surgical procedures, contributing a potential improvement of their quality.

The presence of family members during cardiopulmonary resuscitation: European federation of Critical Care Nursing associations, European Society of Paediatric and Neonatal Intensive Care and European Society of Cardiology Council on Cardiovascular Nursing and Allied Professions Joint Position Statement.

PubMed

Fulbrook, Paul; Latour, Jos; Albarran, John; de Graaf, Wouter; Lynch, Fiona; Devictor, Denis; Norekvål, Tone

2007-12-01

This paper presents the European federation of Critical Care Nursing associations, the European Society of Paediatric and Neonatal Intensive Care, and the European Society of Cardiology Council on Cardiovascular Nursing and Allied Professions Joint Position Statement on The Presence of Family Members During Cardiopulmonary Resuscitation.

14 CFR 25.693 - Joints.

Code of Federal Regulations, 2014 CFR

2014-01-01

... STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction Control Systems § 25.693 Joints. Control... in cable control systems. For ball or roller bearings, the approved ratings may not be exceeded...

14 CFR 25.693 - Joints.

Code of Federal Regulations, 2011 CFR

2011-01-01

... STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction Control Systems § 25.693 Joints. Control... in cable control systems. For ball or roller bearings, the approved ratings may not be exceeded...

14 CFR 25.693 - Joints.

Code of Federal Regulations, 2012 CFR

2012-01-01

... STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction Control Systems § 25.693 Joints. Control... in cable control systems. For ball or roller bearings, the approved ratings may not be exceeded...

14 CFR 25.693 - Joints.

Code of Federal Regulations, 2010 CFR

2010-01-01

... STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction Control Systems § 25.693 Joints. Control... in cable control systems. For ball or roller bearings, the approved ratings may not be exceeded...

Joint Polar Satellite System (JPSS) Micrometeoroid and Orbital Debris (MMOD) Assessment

NASA Technical Reports Server (NTRS)

Squire, Michael D.; Cooke, William J.; Williamsen, Joel; Kessler, Donald; Vesely, William E.; Hull, Scott H.; Schonberg, William; Peterson, Glenn E.; Jenkin, Alan B.; Cornford, Steven L.

2015-01-01

The Joint Polar Satellite System (JPSS) Project requested the NASA Engineering and Safety Center (NESC) conduct an independent evaluation of the Micrometeoroid and Orbital Debris (MMOD) models used in the latest JPSS MMOD risk assessment. The principal focus of the assessment was to compare Orbital Debris Engineering Model version 3 (ORDEM 3.0) with the Meteoroid and Space Debris Terrestrial Environment Reference version 2009 (MASTER-2009) and Aerospace Debris Environment Projection Tool (ADEPT) and provide recommendations to the JPSS Project regarding MMOD protection. The outcome of the NESC assessment is contained in this report.

DWARF – a data warehouse system for analyzing protein families

PubMed Central

Fischer, Markus; Thai, Quan K; Grieb, Melanie; Pleiss, Jürgen

2006-01-01

Background The emerging field of integrative bioinformatics provides the tools to organize and systematically analyze vast amounts of highly diverse biological data and thus allows to gain a novel understanding of complex biological systems. The data warehouse DWARF applies integrative bioinformatics approaches to the analysis of large protein families. Description The data warehouse system DWARF integrates data on sequence, structure, and functional annotation for protein fold families. The underlying relational data model consists of three major sections representing entities related to the protein (biochemical function, source organism, classification to homologous families and superfamilies), the protein sequence (position-specific annotation, mutant information), and the protein structure (secondary structure information, superimposed tertiary structure). Tools for extracting, transforming and loading data from public available resources (ExPDB, GenBank, DSSP) are provided to populate the database. The data can be accessed by an interface for searching and browsing, and by analysis tools that operate on annotation, sequence, or structure. We applied DWARF to the family of α/β-hydrolases to host the Lipase Engineering database. Release 2.3 contains 6138 sequences and 167 experimentally determined protein structures, which are assigned to 37 superfamilies 103 homologous families. Conclusion DWARF has been designed for constructing databases of large structurally related protein families and for evaluating their sequence-structure-function relationships by a systematic analysis of sequence, structure and functional annotation. It has been applied to predict biochemical properties from sequence, and serves as a valuable tool for protein engineering. PMID:17094801

Joint Book Reading and Receptive Vocabulary: A Parallel Process Model

ERIC Educational Resources Information Center

Meng, Christine

2016-01-01

The purpose of the present study was to understand the reciprocal, bidirectional longitudinal relation between joint book reading and English receptive vocabulary. To address the research goals, a nationally representative sample of Head Start children, the Head Start Family and Child Experiences Survey (2003 cohort), was used for analysis. The…

Muscle-Specific Effective Mechanical Advantage and Joint Impulse in Weightlifting.

PubMed

Kipp, Kristof; Harris, Chad

2017-07-01

Kipp, K, and Harris, C. Muscle-specific effective mechanical advantage and joint impulse in weightlifting. J Strength Cond Res 31(7): 1905-1910, 2017-Lifting greater loads during weightlifting exercises may theoretically be achieved through increasing the magnitudes of net joint impulses or manipulating the joints' effective mechanical advantage (EMA). The purpose of this study was to investigate muscle-specific EMA and joint impulse as well as impulse-momentum characteristics of the lifter-barbell system across a range of external loads during the execution of the clean. Collegiate-level weightlifters performed submaximal cleans at 65, 75, and 85% of their 1-repetition maximum (1-RM), whereas data from a motion analysis system and a force plate were used to calculate lifter-barbell system impulse and velocity, as well as net extensor impulse generated at the hip, knee, and ankle joints and the EMA of the gluteus maximus, hamstrings, quadriceps, and triceps surae muscles. The results indicated that the lifter-barbell system impulse did not change as load increased, whereas the velocity of the lifter-barbell system decreased with greater load. In addition, the net extensor impulse at all joints increased as load increased. The EMA of all muscles did not, however, change as load increased. The load-dependent effects on the impulse-velocity characteristics of the lifter-barbell system may reflect musculoskeletal force-velocity behaviors, and may further indicate that the weightlifting performance is limited by the magnitude of ground reaction force impulse. In turn, the load-dependent effects observed at the joint level indicated that lifting greater loads were due to greater net extensor impulses generated at the joints of the lower extremity and not greater EMAs of the respective extensor muscles. In combination, these results suggest that lifting greater external loads during the clean is due to the ability to generate large extensor joint impulses, rather than

Systems, Apparatuses, and Methods for Using Durable Adhesively Bonded Joints for Sandwich Structures

NASA Technical Reports Server (NTRS)

Smeltzer, III, Stanley S. (Inventor); Lundgren, Eric C. (Inventor)

2014-01-01

Systems, methods, and apparatus for increasing durability of adhesively bonded joints in a sandwich structure. Such systems, methods, and apparatus includes an first face sheet and an second face sheet as well as an insert structure, the insert structure having a first insert face sheet, a second insert face sheet, and an insert core material. In addition, sandwich core material is arranged between the first face sheet and the second face sheet. A primary bondline may be coupled to the face sheet(s) and the splice. Further, systems, methods, and apparatus of the present disclosure advantageously reduce the load, provide a redundant path, reduce structural fatigue, and/or increase fatigue life.

Organization of Experience among Family Members in the Immediate Present: A Gestalt/Systems Integration.

ERIC Educational Resources Information Center

Kaplan, Marvin L.; Kaplan, Netta R.

1982-01-01

Outlines two formulations that generate conceptual perspectives of immediate phenomena: (1) the family system has a time-enduring stability; (2) the family system has an immediate and temporary organization. Integrates systems thinking and Gestalt Therapy while recognizing individual experience as embedded in a self-maintaining system of the…

Lower limb joint work and joint work contribution during downhill and uphill walking at different inclinations.

PubMed

Alexander, Nathalie; Strutzenberger, Gerda; Ameshofer, Lisa Maria; Schwameder, Hermann

2017-08-16

Work performance and individual joint contribution to total work are important information for creating training protocols, but were not assessed so far for sloped walking. Therefore, the purpose of this study was to analyze lower limb joint work and joint contribution of the hip, knee and ankle to total lower limb work during sloped walking in a healthy population. Eighteen male participants (27.0±4.7yrs, 1.80±0.05m, 74.5±8.2kg) walked on an instrumented ramp at inclination angles of 0°, ±6°, ±12° and ±18° at 1.1m/s. Kinematic and kinetic data were captured using a motion-capture system (Vicon) and two force plates (AMTI). Joint power curves, joint work (positive, negative, absolute) and each joint's contribution to total lower limb work were analyzed throughout the stance phase using an ANOVA with repeated measures. With increasing inclination positive joint work increased for the ankle and hip joint and in total during uphill walking. Negative joint work increased for each joint and in total work during downhill walking. Absolute work was increased during both uphill (all joints) and downhill (ankle & knee) walking. Knee joint contribution to total negative and absolute work increased during downhill walking while hip and ankle contributions decreased. This study identified, that, when switching from level to a 6° and from 6° to a 12° inclination the gain of individual joint work is more pronounced compared to switching from 12° to an 18° inclination. The results might be used for training recommendations and specific training intervention with respect to sloped walking. Copyright © 2017 Elsevier Ltd. All rights reserved.

Active Metal Brazing and Characterization of Brazed Joints in C-C and C-SiC Composites to Copper-Clad-Molybdenum System

NASA Technical Reports Server (NTRS)

Singh, M.; Asthana, R.

2008-01-01

Carbon/carbon composites with CVI and resin-derived matrices, and C/SiC composites reinforced with T-300 carbon fibers in a CVI SiC matrix were joined to Cu-clad Mo using two Ag-Cu braze alloys, Cusil-ABA (1.75% Ti) and Ticusil (4.5% Ti). The brazed joints revealed good interfacial bonding, preferential precipitation of Ti at the composite/braze interface, and a tendency toward delamination in resin-derived C/C composite. Extensive braze penetration of the inter-fiber channels in the CVI C/C composites was observed. The Knoop microhardness (HK) distribution across the C/C joints indicated sharp gradients at the interface, and a higher hardness in Ticusil than in Cusil-ABA. For the C/SiC composite to Cu-clad-Mo joints, the effect of composite surface preparation revealed that ground samples did not crack whereas unground samples cracked. Calculated strain energy in brazed joints in both systems is comparable to the strain energy in a number of other ceramic/metal systems. Theoretical predictions of the effective thermal resistance suggest that such joined systems may be promising for thermal management applications.

Joint Doctrine for Electronic Warfare

DTIC Science & Technology

2000-04-07

Command, Control, Communications, and Computer Systems Directorate (J-6) and the Intelligence Directorate (J-2). The joint restricted frequency list (JRFL...for exercises and operations within the operational area. EW interests in the preparation of the joint restricted frequency list for specific... frequency list (JRFL) for approval by the J-3 (through the information operations [IO] cell or equivalent). Periodically updates and distributes the JRFL

Effect of Composite Substrates on the Mechanical Behavior of Brazed Joints in Metal-Composite System

NASA Technical Reports Server (NTRS)

Singh, M.; Morscher, Gregory N.; Shpargel, Tarah; Asthana, Rajiv

2006-01-01

Advanced composite components are being considered for a wide variety of demanding applications in aerospace, space exploration, and ground based systems. A number of these applications require robust integration technologies to join dissimilar materials (metalcomposites) into complex structural components. In this study, three types of composites (C-C, C-SiC, and SiC-SiC) were vacuum brazed to commercially pure Ti using the active metal braze alloy Cusil-ABA (63Ag-35.3Cu-1.75Ti). Composite substrates with as fabricated and polished surfaces were used for brazing. The microstructure and composition of the joint, examined using scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (EDS), showed sound metallurgical bonding in all systems. The butt strap tensile (BST) test was performed on bonded specimens at room and elevated temperatures. Effect of substrate composition, interlaminar properties, and surface roughness on the mechanical properties and failure behavior of joints will be discussed.

Energy and the Structure of Social System: Significance for Families.

ERIC Educational Resources Information Center

Keefe, Dennis R.

The purpose of the paper is to present a model and suggest hypotheses relating the family as a social system to the concepts of human and natural energy. Human energy is interpreted as the capacity of humans, in this case, family members, for doing work and natural energy as resources such as natural gas, carbon dioxide, and heat. A behavioral…

The Deserving Poor, the Family, and the U.S. Welfare System

PubMed Central

Moffitt, Robert A.

2015-01-01

Contrary to the popular view that the U.S. welfare system has been in a contractionary phase after the expansions of the welfare state in the 1960s, welfare spending resumed steady growth after a pause in the 1970s. However, while aggregate spending is higher than ever, there has been a redistribution away from non-elderly and non-disabled families to families with older adults and to families with recipients of disability programs, a redistribution away from non-elderly nondisabled single parent families to married parent families, and a redistribution of transfers away from the poorest families to those with higher incomes. These redistributions likely reflect long-standing, and perhaps increasing, conceptualizations by U.S. society of which poor are deserving and which are not. PMID:26047935

Autosomal Recessive Mental Retardation, Deafness, Ankylosis, and Mild Hypophosphatemia Associated with a Novel ANKH Mutation in a Consanguineous Family

PubMed Central

Morava, Eva; Kühnisch, Jirko; Drijvers, Jefte M.; Robben, Joris H.; Cremers, Cor; van Setten, Petra; Branten, Amanda; Stumpp, Sabine; de Jong, Alphons; Voesenek, Krysta; Vermeer, Sascha; Heister, Angelien; Claahsen-van der Grinten, Hedi L.; O'Neill, Charles W.; Willemsen, Michèl A.; Lefeber, Dirk; Deen, Peter M. T.; Kornak, Uwe; Kremer, Hannie; Wevers, Ron A.

2011-01-01

Context: Mutations in ANKH cause the highly divergent conditions familial chondrocalcinosis and craniometaphyseal dysplasia. The gene product ANK is supposed to regulate tissue mineralization by transporting pyrophosphate to the extracellular space. Objective: We evaluated several family members of a large consanguineous family with mental retardation, deafness, and ankylosis. We compared their skeletal, metabolic, and serological parameters to that of the autosomal recessive progressive ankylosis (ank) mouse mutant, caused by a loss-of-function mutation in the murine ortholog Ank. Participants: The studied patients had painful small joint soft-tissue calcifications, progressive spondylarthropathy, osteopenia, mild hypophosphatemia, mixed hearing loss, and mental retardation. Results: After mapping the disease gene to 5p15, we identified the novel homozygous ANK missense mutation L244S in all patients. Although L244 is a highly conserved amino acid, the mutated ANK protein was detected at normal levels at the plasma membrane in primary patient fibroblasts. The phenotype was highly congruent with the autosomal recessive progressive ankylosis (ank) mouse mutant. This indicates a loss-of-function effect of the L244S mutation despite normal ANK protein expression. Interestingly, our analyses revealed that the primary step of joint degeneration is fibrosis and mineralization of articular soft tissues. Moreover, heterozygous carriers of the L244S mutation showed mild osteoarthritis without metabolic alterations, pathological calcifications, or central nervous system involvement. Conclusion: Beyond the description of the first human progressive ankylosis phenotype, our results indicate that ANK influences articular soft tissues commonly involved in degenerative joint disorders. Furthermore, this human disorder provides the first direct evidence for a role of ANK in the central nervous system. PMID:20943778

Autosomal recessive mental retardation, deafness, ankylosis, and mild hypophosphatemia associated with a novel ANKH mutation in a consanguineous family.

PubMed

Morava, Eva; Kühnisch, Jirko; Drijvers, Jefte M; Robben, Joris H; Cremers, Cor; van Setten, Petra; Branten, Amanda; Stumpp, Sabine; de Jong, Alphons; Voesenek, Krysta; Vermeer, Sascha; Heister, Angelien; Claahsen-van der Grinten, Hedi L; O'Neill, Charles W; Willemsen, Michèl A; Lefeber, Dirk; Deen, Peter M T; Kornak, Uwe; Kremer, Hannie; Wevers, Ron A

2011-01-01

Mutations in ANKH cause the highly divergent conditions familial chondrocalcinosis and craniometaphyseal dysplasia. The gene product ANK is supposed to regulate tissue mineralization by transporting pyrophosphate to the extracellular space. We evaluated several family members of a large consanguineous family with mental retardation, deafness, and ankylosis. We compared their skeletal, metabolic, and serological parameters to that of the autosomal recessive progressive ankylosis (ank) mouse mutant, caused by a loss-of-function mutation in the murine ortholog Ank. The studied patients had painful small joint soft-tissue calcifications, progressive spondylarthropathy, osteopenia, mild hypophosphatemia, mixed hearing loss, and mental retardation. After mapping the disease gene to 5p15, we identified the novel homozygous ANK missense mutation L244S in all patients. Although L244 is a highly conserved amino acid, the mutated ANK protein was detected at normal levels at the plasma membrane in primary patient fibroblasts. The phenotype was highly congruent with the autosomal recessive progressive ankylosis (ank) mouse mutant. This indicates a loss-of-function effect of the L244S mutation despite normal ANK protein expression. Interestingly, our analyses revealed that the primary step of joint degeneration is fibrosis and mineralization of articular soft tissues. Moreover, heterozygous carriers of the L244S mutation showed mild osteoarthritis without metabolic alterations, pathological calcifications, or central nervous system involvement. Beyond the description of the first human progressive ankylosis phenotype, our results indicate that ANK influences articular soft tissues commonly involved in degenerative joint disorders. Furthermore, this human disorder provides the first direct evidence for a role of ANK in the central nervous system.

Application of honeymoon cold-set adhesive systems for structural end joints in North America

Treesearch

Roland E. Kreibich; Richard W. Hemingway; William T. Nearn

1993-01-01

High quality, structural end joints can be cold-set at mill speed using a two-component honeymoon adhesive system composed of southern pine bark or pecan shell membrane tannin and a modified, commercially available. phenol-resorcinol-formaldehyde resin. Adhesive costs of a fully waterproof glueline are approximately $0.60/lb. of applied adhesive mix compared to $0.80/...

Multicultural Mosaic: A Family Book Club.

ERIC Educational Resources Information Center

Dias-Mitchell, Laurie; Harris, Elizabeth

2001-01-01

Authors, a library media specialist and a literature/language arts teacher, both recipients of Theodore R. Sizer Fellowships, describe their joint project, "Multicultural Mosaic: A Family Book Club." Their proposal was to strengthen the home-school connection by establishing a book club accessible to all middle and high school students…

Grinding assembly, grinding apparatus, weld joint defect repair system, and methods

DOEpatents

Larsen, Eric D.; Watkins, Arthur D.; Bitsoi, Rodney J.; Pace, David P.

2005-09-27

A grinding assembly for grinding a weld joint of a workpiece includes a grinder apparatus, a grinder apparatus includes a grinding wheel configured to grind the weld joint, a member configured to receive the grinding wheel, the member being configured to be removably attached to the grinder apparatus, and a sensor assembly configured to detect a contact between the grinding wheel and the workpiece. The grinding assembly also includes a processing circuitry in communication with the grinder apparatus and configured to control operations of the grinder apparatus, the processing circuitry configured to receive weld defect information of the weld joint from an inspection assembly to create a contour grinding profile to grind the weld joint in a predetermined shape based on the received weld defect information, and a manipulator having an end configured to carry the grinder apparatus, the manipulator further configured to operate in multiple dimensions.

Mandibular kinematics represented by a non-orthogonal floating axis joint coordinate system.

PubMed

Leader, Joseph K; Boston, J Robert; Debski, Richard E; Rudy, Thomas E

2003-02-01

There are many methods used to represent joint kinematics (e.g., roll, pitch, and yaw angles; instantaneous center of rotation; kinematic center; helical axis). Often in biomechanics internal landmarks are inferred from external landmarks. This study represents mandibular kinematics using a non-orthogonal floating axis joint coordinate system based on 3-D geometric models with parameters that are "clinician friendly" and mathematically rigorous. Kinematics data for two controls were acquired from passive fiducial markers attached to a custom dental clutch. The geometric models were constructed from MRI data. The superior point along the arc of the long axis of the condyle was used to define the coordinate axes. The kinematic data and geometric models were registered through fiducial markers visible during both protocols. The mean absolute maxima across the subjects for sagittal rotation, coronal rotation, axial rotation, medial-lateral translation, anterior-posterior translation, and inferior-superior translation were 34.10 degrees, 1.82 degrees, 1.14 degrees, 2.31, 21.07, and 6.95 mm, respectively. All the parameters, except for one subject's axial rotation, were reproducible across two motion recording sessions. There was a linear correlation between sagittal rotation and translation, the dominant motion plane, with approximately 1.5 degrees of rotation per millimeter of translation. The novel approach of combining the floating axis system with geometric models succinctly described mandibular kinematics with reproducible and clinician friendly parameters.

Requirements for the Military Message System (MMS) Family: Data Types and User Commands.

DTIC Science & Technology

1986-04-11

AD-A167 126 REQUIREMENTS FOR THE MILITARY MESSASE SYSTEM (NHS) i FRILY: DATA TYPES AND USER CONNNDS(U) NAVAL RESEARCH LAB WASHINGTON DC C L HEITHEVER... System (MMS) Family: Data Types and User Commands CONSTANCE L. HEITMEYER Computer Science and Systems Branch I Information Technology Division April 11...Security Classification) Requirements for the Military Message System (MMS) Family: Data Types and User Commands 12. PERSONAL AUTHOR(S) Heitmeer, Constance

A search for mini-clusters in Japan-USSR Joint Experiment at Pamir

NASA Technical Reports Server (NTRS)

1985-01-01

A search for mini-clusters, very collimated shower clusters of hadrons and electromagnetic particles, is made for the hadron and gamma families observed by Japan-USSR joint carbon chamber at Pamir. The existence of anomalous correlation between hadrons and electromagnetic particles is found. The decascading method is applied to the families and it is found that 11 clusters which include hadrons as members have smaller spread, Er 3.5 GeV.m and larger lateral spread, E'R' 100 GeV.m, from the family center. In the simulated events, such clusters were found to be very rare.

Investigation of Super*Zip separation joint

NASA Technical Reports Server (NTRS)

Bement, Laurence J.; Schimmel, Morry L.

1988-01-01

An investigation to determine the most likely cause of two failures of five tests on 79 inch diameter Lockheed Super*Zip spacecraft separation joints being used for the development of a Shuttle/Centaur propulsion system. This joint utilizes an explosively expanded tube to fracture surrounding prenotched aluminum plates to achieve planar separation. A test method was developed and more than 300 tests firings were made to provide an understanding of severance mechanisms and the functional performance effects of system variables. An approach for defining functional margin was developed, and specific recommendations were made for improving existing and future systems.

FAMNET: The Use of an Electronic Mail System in Canadian Academic Family Medicine

PubMed Central

Ostbye, Truls; Needler, M.C.; Shires, David B.

1988-01-01

The major Canadian universities are connected via a computer communications network called `Netnorth'. We have used Netnorth's accessible, low-cost, electronic mail system to develop a network of academic Family Medicine users (Famnet). We then tested Famnet's utility for conducting rapid surveys. Famnet shows promise of being a useful means of undertaking regular inter-departmental communication. This system may also increase collegiality among Canadian Departments of Family Medicine and facilitate international communication in family medicine. PMID:21264023

Joint Radioisotope Electric Propulsion Studies - Neptune System Explorer

NASA Technical Reports Server (NTRS)

Khan, M. Omair; Amini, Rashied; Ervin, Joan; Lang, Jared; Landau, Damon; Oleson, Steven; Spilker, Thomas; Strange, Nathan

2011-01-01

The Neptune System Explorer (NSE) mission concept study assessed opportunities to conduct Cassini-like science at Neptune with a radioisotope electric propulsion (REP) based spacecraft. REP is based on powering an electric propulsion (EP) engine with a radioisotope power source (RPS). The NSE study was commissioned under the Joint Radioisotope Electric Propulsion Studies (JREPS) project, which sought to determine the technical feasibility of flagship class REP applications. Within JREPS, special emphasis was given toward identifying tall technology tent poles, as well as recommending any new RPS technology developments that would be required for complicated REP missions. Based on the goals of JREPS, multiple RPS (e.g. thermoelectric and Stirling based RPS) and EP (e.g. Hall and ion engines) technology combinations were traded during the NSE study to determine the most favorable REP design architecture. Among the findings from the study was the need for >400We RPS systems, which was driven by EP operating powers and the requirement for a long-lived mission in the deep solar system. Additionally multiple development and implementation risks were identified for the NSE concept, as well as REP missions in general. Among the strengths of the NSE mission would be the benefits associated with RPS and EP use, such as long-term power (approx. 2-3kW) at Neptune and flexible trajectory options for achieving orbit or tours of the Neptune system. Although there are still multiple issues to mitigate, the NSE concept demonstrated distinct advantages associated with using REP for deep space flagship-class missions.

A Neuromuscular Electrical Stimulation (NMES) and robot hybrid system for multi-joint coordinated upper limb rehabilitation after stroke.

PubMed

Rong, Wei; Li, Waiming; Pang, Mankit; Hu, Junyan; Wei, Xijun; Yang, Bibo; Wai, Honwah; Zheng, Xiaoxiang; Hu, Xiaoling

2017-04-26

It is a challenge to reduce the muscular discoordination in the paretic upper limb after stroke in the traditional rehabilitation programs. In this study, a neuromuscular electrical stimulation (NMES) and robot hybrid system was developed for multi-joint coordinated upper limb physical training. The system could assist the elbow, wrist and fingers to conduct arm reaching out, hand opening/grasping and arm withdrawing by tracking an indicative moving cursor on the screen of a computer, with the support from the joint motors and electrical stimulations on target muscles, under the voluntary intention control by electromyography (EMG). Subjects with chronic stroke (n = 11) were recruited for the investigation on the assistive capability of the NMES-robot and the evaluation of the rehabilitation effectiveness through a 20-session device assisted upper limb training. In the evaluation, the movement accuracy measured by the root mean squared error (RMSE) during the tracking was significantly improved with the support from both the robot and NMES, in comparison with those without the assistance from the system (P < 0.05). The intra-joint and inter-joint muscular co-contractions measured by EMG were significantly released when the NMES was applied to the agonist muscles in the different phases of the limb motion (P < 0.05). After the physical training, significant improvements (P < 0.05) were captured by the clinical scores, i.e., Modified Ashworth Score (MAS, the elbow and the wrist), Fugl-Meyer Assessment (FMA), Action Research Arm Test (ARAT), and Wolf Motor Function Test (WMFT). The EMG-driven NMES-robotic system could improve the muscular coordination at the elbow, wrist and fingers. ClinicalTrials.gov. NCT02117089 ; date of registration: April 10, 2014.

Measurement of joint kinematics using a conventional clinical single-perspective flat-panel radiography system.

PubMed

Seslija, Petar; Teeter, Matthew G; Yuan, Xunhua; Naudie, Douglas D R; Bourne, Robert B; Macdonald, Steven J; Peters, Terry M; Holdsworth, David W

2012-10-01

The ability to accurately measure joint kinematics is an important tool in studying both normal joint function and pathologies associated with injury and disease. The purpose of this study is to evaluate the efficacy, accuracy, precision, and clinical safety of measuring 3D joint motion using a conventional flat-panel radiography system prior to its application in an in vivo study. An automated, image-based tracking algorithm was implemented to measure the three-dimensional pose of a sparse object from a two-dimensional radiographic projection. The algorithm was tested to determine its efficiency and failure rate, defined as the number of image frames where automated tracking failed, or required user intervention. The accuracy and precision of measuring three-dimensional motion were assessed using a robotic controlled, tibiofemoral knee phantom programmed to mimic a subject with a total knee replacement performing a stair ascent activity. Accuracy was assessed by comparing the measurements of the single-plane radiographic tracking technique to those of an optical tracking system, and quantified by the measurement discrepancy between the two systems using the Bland-Altman technique. Precision was assessed through a series of repeated measurements of the tibiofemoral kinematics, and was quantified using the across-trial deviations of the repeated kinematic measurements. The safety of the imaging procedure was assessed by measuring the effective dose of ionizing radiation associated with the x-ray exposures, and analyzing its relative risk to a human subject. The automated tracking algorithm displayed a failure rate of 2% and achieved an average computational throughput of 8 image frames/s. Mean differences between the radiographic and optical measurements for translations and rotations were less than 0.08 mm and 0.07° in-plane, and 0.24 mm and 0.6° out-of-plane. The repeatability of kinematics measurements performed using the radiographic tracking technique was

The contribution of quasi-joint stiffness of the ankle joint to gait in patients with hemiparesis.

PubMed

Sekiguchi, Yusuke; Muraki, Takayuki; Kuramatsu, Yuko; Furusawa, Yoshihito; Izumi, Shin-Ichi

2012-06-01

The role of ankle joint stiffness during gait in patients with hemiparesis has not been clarified. The purpose of this study was to determine the contribution of quasi-joint stiffness of the ankle joint to spatiotemporal and kinetic parameters regarding gait in patients with hemiparesis due to brain tumor or stroke and healthy individuals. Spatiotemporal and kinetic parameters regarding gait in twelve patients with hemiparesis due to brain tumor or stroke and nine healthy individuals were measured with a 3-dimensional motion analysis system. Quasi-joint stiffness was calculated from the slope of the linear regression of the moment-angle curve of the ankle joint during the second rocker. There was no significant difference in quasi-joint stiffness among both sides of patients and the right side of controls. Quasi-joint stiffness on the paretic side of patients with hemiparesis positively correlated with maximal ankle power (r=0.73, P<0.01) and gait speed (r=0.66, P<0.05). In contrast, quasi-joint stiffness in controls negatively correlated with maximal ankle power (r=-0.73, P<0.05) and gait speed (r=-0.76, P<0.05). Our findings suggested that ankle power during gait might be generated by increasing quasi-joint stiffness in patients with hemiparesis. In contrast, healthy individuals might decrease quasi-joint stiffness to avoid deceleration of forward tilt of the tibia. Our findings might be useful for selecting treatment for increased ankle stiffness due to contracture and spasticity in patients with hemiparesis. Copyright © 2011 Elsevier Ltd. All rights reserved.

Agoraphobia and Paradigm Strain: A Family Systems Perspective.

ERIC Educational Resources Information Center

Shean, Glenn; Rohrbaugh, Michael

Agoraphobia is an increasingly common, often chronically incapacitating anxiety disorder. Both behavior therapy and pharmacotherapy can be effective in reducing the intensity of agoraphobic symptoms. There are promising new developments, however, from a family systems perspective. Researchers are finding that an agoraphobic's marriage and family…

The effects of transcutaneous electrical nerve stimulation on joint position sense in patients with knee joint osteoarthritis.

PubMed

Shirazi, Zahra Rojhani; Shafaee, Razieh; Abbasi, Leila

2014-10-01

To study the effects of transcutaneous electrical nerve stimulation (TENS) on joint position sense (JPS) in knee osteoarthritis (OA) subjects. Thirty subjects with knee OA (40-60 years old) using non-random sampling participated in this study. In order to evaluate the absolute error of repositioning of the knee joint, Qualysis Track Manager system was used and sensory electrical stimulation was applied through the TENS device. The mean errors in repositioning of the joint, in two position of the knee joint with 20 and 60 degree angle, after applying the TENS was significantly decreased (p < 0.05). Application of TENS in subjects with knee OA could improve JPS in these subjects.

Photoacoustic and ultrasound dual-modality imaging of human peripheral joints

NASA Astrophysics Data System (ADS)

Xu, Guan; Rajian, Justin R.; Girish, Gandikota; Kaplan, Mariana J.; Fowlkes, J. Brian; Carson, Paul L.; Wang, Xueding

2013-01-01

A photoacoustic (PA) and ultrasound (US) dual modality system, for imaging human peripheral joints, is introduced. The system utilizes a commercial US unit for both US control imaging and PA signal acquisition. Preliminary in vivo evaluation of the system, on normal volunteers, revealed that this system can recover both the structural and functional information of intra- and extra-articular tissues. Confirmed by the control US images, the system, on the PA mode, can differentiate tendon from surrounding soft tissue based on the endogenous optical contrast. Presenting both morphological and pathological information in joint, this system holds promise for diagnosis and characterization of inflammatory joint diseases such as rheumatoid arthritis.

A method for the automated construction of the joint system of equations to solve the problem of the flow distribution in hydraulic networks

NASA Astrophysics Data System (ADS)

Novikov, A. E.

1993-10-01

There are several methods of solving the problem of the flow distribution in hydraulic networks. But all these methods have no mathematical tools for forming joint systems of equations to solve this problem. This paper suggests a method of constructing joint systems of equations to calculate hydraulic circuits of the arbitrary form. The graph concept, according to Kirchhoff, has been introduced.

Design of a telerobotic controller with joint torque sensors

NASA Technical Reports Server (NTRS)

Jansen, J. F.; Herndon, J. N.

1990-01-01

The purpose was to analytically show how to design a joint controller for a telerobotic system when joint torque sensors are available. Other sensors such as actuator position, actuator velocity, joint position, and joint velocity are assumed to be accessible; however, the results will also be useful when only partial measurements are available. The controller presented can be applied to either mode of operation of a manipulator (i.e., teleoperation or robotic). Mechanical manipulators with high levels of friction are assumed. The results are applied to a telerobotic system built for NASA. Very high levels of friction have been reduced using high-gain feedback while avoiding limit cycles.

Dynamic stability analysis of torsional vibrations of a shaft system connected by a Hooke's joint through a continuous system model

NASA Astrophysics Data System (ADS)

Bulut, Gökhan

2014-08-01

Stability of parametrically excited torsional vibrations of a shaft system composed of two torsionally elastic shafts interconnected through a Hooke's joint is studied. The shafts are considered to be continuous (distributed-parameter) systems and an approximate discrete model for the torsional vibrations of the shaft system is derived via a finite element scheme. The stability of the solutions of the linearized equations of motion, consisting of a set of Mathieu-Hill type equations, is examined by means of a monodromy matrix method and the results are presented in the form of a Strutt-Ince diagram visualizing the effects of the system parameters on the stability of the shaft system.

Strength evaluation of socket joints

NASA Technical Reports Server (NTRS)

Rash, Larry C.

1994-01-01

This report documents the development of a set of equations that can be used to provide a relatively simple solution for identifying the strength of socket joints and for most cases avoid the need of more lengthy analyses. The analytical approach was verified by comparison of the contact load distributions to results obtained from a finite element analysis. The contacting surfaces for the specific joint in this analysis are in the shape of frustrums of a cone and are representative of the tapered surfaces in the socket-type joints used to join segments of model support systems for wind tunnels. The results are in the form of equations that can be used to determine the contact loads and stresses in the joint from the given geometry and externally applied loads. Equations were determined to define the bending moments and stresses along the length of the joints based on strength and materials principles. The results have also been programmed for a personal computer and a copy of the program is included.

The method of a joint intraday security check system based on cloud computing

NASA Astrophysics Data System (ADS)

Dong, Wei; Feng, Changyou; Zhou, Caiqi; Cai, Zhi; Dan, Xu; Dai, Sai; Zhang, Chuancheng

2017-01-01

The intraday security check is the core application in the dispatching control system. The existing security check calculation only uses the dispatch center’s local model and data as the functional margin. This paper introduces the design of all-grid intraday joint security check system based on cloud computing and its implementation. To reduce the effect of subarea bad data on the all-grid security check, a new power flow algorithm basing on comparison and adjustment with inter-provincial tie-line plan is presented. And the numerical example illustrated the effectiveness and feasibility of the proposed method.

Nine cases of Alkaptonuria in one family in southern Jordan.

PubMed

Al-Sbou, Mohammed; Mwafi, Nesrin

2012-03-01

Alkaptonuria is a rare autosomal recessive metabolic disorder characterized by a deficiency of homogentisate 1,2-dioxygenase (HGO) in the liver. This results in excretion of large quantities of homogentisic acid (HGA) (also called alkapton) in the urine and a slowly progressive deposition of homogentisic acid and its oxidative product in connective tissues. Clinical characteristic features of alkaptonuria are darkening of urine, bluish-dark pigmentation of connective tissues (ochronosis) and arthritis of large joints and spine. Cardiovascular and genitourinary systems may also be affected. In this report, we present the initial results of screening family members with history of alkaptonuria in southern region of Jordan. We present 9 cases of alkaptonuria (two males and seven females) in one Jordanian family. The history, signs and symptoms, diagnostic techniques and treatment options of alkaptonuria are reviewed in this article.

The KineSpring® Knee Implant System: an implantable joint-unloading prosthesis for treatment of medial knee osteoarthritis

PubMed Central

Clifford, Anton G; Gabriel, Stefan M; O’Connell, Mary; Lowe, David; Miller, Larry E; Block, Jon E

2013-01-01

Symptomatic medial compartment knee osteoarthritis (OA) is the leading cause of musculoskeletal pain and disability in adults. Therapies intended to unload the medial knee compartment have yielded unsatisfactory results due to low patient compliance with conservative treatments and high complication rates with surgical options. There is no widely available joint-unloading treatment for medial knee OA that offers clinically important symptom alleviation, low complication risk, and high patient acceptance. The KineSpring® Knee Implant System (Moximed, Inc, Hayward, CA, USA) is a first-of-its-kind, implantable, extra-articular, extra-capsular prosthesis intended to alleviate knee OA-related symptoms by reducing medial knee compartment loading while overcoming the limitations of traditional joint-unloading therapies. Preclinical and clinical studies have demonstrated excellent prosthesis durability, substantial reductions in medial compartment and total joint loads, and clinically important improvements in OA-related pain and function. The purpose of this report is to describe the KineSpring System, including implant characteristics, principles of operation, indications for use, patient selection criteria, surgical technique, postoperative care, preclinical testing, and clinical experience. The KineSpring System has potential to bridge the gap between ineffective conservative treatments and irreversible surgical interventions for medial compartment knee OA. PMID:23717052

Development of Mathematic Model of Cold Welding at Drawing-up the Flange Joint of Pneumohydraulic Systems

NASA Astrophysics Data System (ADS)

Boyko, Y. S.

2002-01-01

Provision of high airtightness of joints of pipe- lines of pneumohydraulic systems (PHS) operating under high pressure, is an important task for designing and operation of launch vehicles. In the process of assembly and tests of PHS of launch vehicles, it was found that detachable flange joints do not lose their airtightness after removal of fastening elements, even in conditions of standard loads. The task of this work is in studying a phenomenon connected with initiation of the observed effect of adhesion and also stresses in the zone of contact at drawing- up the flange detachable joints with a plastic gasket. Investigations have shown that density of the joint is kept due to cold welding, as the created conditions are helpful for that process. As a result of the investigations performed, we have developed a mathematic model which is based on application of the theory of metal bonds; that theory explains the essence of the effect observed. Basic factors which provide optimum mode of cold welding, are effort which can cause microplastic deformation and form maximum contact, and also quality of processing the material of the surfaces joined. Strength of all- metal joint depends on factual area of contact. So, surface processing quality defines a configuration of microbulges which come into contact not simultaneously, and their stressed state is different, and it influences the character of dependence of the contact area on loading. Results of calculations by the mathematic model are expressed by dependencies of factual area of contact and a single diameter of the contact spot on the load applied which compresses the materials with various physical properties, and on the surface processing quality. The mathematic model allows to explain the common character of the cold welding process in detachable flange joints with the plastic gasket, to determine the nature and the character of acting forces, to define kinetics and the mechanism of formation of cold welding of

Synchrony in Joint Action Is Directed by Each Participant’s Motor Control System

PubMed Central

Noy, Lior; Weiser, Netta; Friedman, Jason

2017-01-01

In this work, we ask how the probability of achieving synchrony in joint action is affected by the choice of motion parameters of each individual. We use the mirror game paradigm to study how changes in leader’s motion parameters, specifically frequency and peak velocity, affect the probability of entering the state of co-confidence (CC) motion: a dyadic state of synchronized, smooth and co-predictive motions. In order to systematically study this question, we used a one-person version of the mirror game, where the participant mirrored piece-wise rhythmic movements produced by a computer on a graphics tablet. We systematically varied the frequency and peak velocity of the movements to determine how these parameters affect the likelihood of synchronized joint action. To assess synchrony in the mirror game we used the previously developed marker of co-confident (CC) motions: smooth, jitter-less and synchronized motions indicative of co-predicative control. We found that when mirroring movements with low frequencies (i.e., long duration movements), the participants never showed CC, and as the frequency of the stimuli increased, the probability of observing CC also increased. This finding is discussed in the framework of motor control studies showing an upper limit on the duration of smooth motion. We confirmed the relationship between motion parameters and the probability to perform CC with three sets of data of open-ended two-player mirror games. These findings demonstrate that when performing movements together, there are optimal movement frequencies to use in order to maximize the possibility of entering a state of synchronized joint action. It also shows that the ability to perform synchronized joint action is constrained by the properties of our motor control systems. PMID:28443047

Game-theoretic approach to joint transmitter adaptation and power control in wireless systems.

PubMed

Popescu, Dimitrie C; Rawat, Danda B; Popescu, Otilia; Saquib, Mohamad

2010-06-01

Game theory has emerged as a new mathematical tool in the analysis and design of wireless communication systems, being particularly useful in studying the interactions among adaptive transmitters that attempt to achieve specific objectives without cooperation. In this paper, we present a game-theoretic approach to the problem of joint transmitter adaptation and power control in wireless systems, where users' transmissions are subject to quality-of-service requirements specified in terms of target signal-to-interference-plus-noise ratios (SINRs) and nonideal vector channels between transmitters and receivers are explicitly considered. Our approach is based on application of separable games, which are a specific class of noncooperative games where the players' cost is a separable function of their strategic choices. We formally state a joint codeword and power adaptation game, which is separable, and we study its properties in terms of its subgames, namely, the codeword adaptation subgame and the power adaptation subgame. We investigate the necessary conditions for an optimal Nash equilibrium and show that this corresponds to an ensemble of user codewords and powers, which maximizes the sum capacity of the corresponding multiaccess vector channel model, and for which the specified target SINRs are achieved with minimum transmitted power.

Effect of facet joint injection versus systemic steroids in low back pain: a randomized controlled trial.

PubMed

Ribeiro, Luiza Helena; Furtado, Rita Nely Vilar; Konai, Monique Sayuri; Andreo, Ana Beatriz; Rosenfeld, Andre; Natour, Jamil

2013-11-01

Randomized clinical trial. To compare the effectiveness of facet joint injection versus systemic steroid in patients with a diagnosis of facet joint syndrome. The term facet joint syndrome has been used to define back pain originating from the facet joints. Treatment is mainly conservative, although interventions, including intra-articular injections and medial branch nerve blocks are used to manage facet-mediated pain. Several studies have evaluated the effectiveness of these interventions. Results of facet joint injection, however, are conflicting. Sixty subjects with a diagnosis of facet joint syndrome were enrolled in the study. They were randomized into experimental and control groups. The experimental group was administered with intra-articular injection of 6 lumbar facet joints with triamcinolone hexacetonide; the control group was administered with triamcinolone acetonide intramuscular injection of 6 lumbar paravertebral points. Visits were taken at baseline and at 1, 4, 12, and 24 weeks after interventions. Outcome measures were used: pain visual analogue scale, pain visual analogue scale during extension of the spine, Likert scale, improvement percentage scale, Roland-Morris, 36-Item Short Form Health Survey, and accountability of medications taken.Homogeneity was tested using the Student t, Pearson χ, and Mann-Whitney tests. Analysis of variance was used to analyze differences in the groups over time and the Student t test to analyze differences between groups at each time evaluation. The groups were similar at baseline. Comparisons between the groups showed, in analysis of variance analysis, an improvement in the experimental group regarding diclofenac intake and quality of life, in the "role physical" profile, assessed by 36-Item Short Form Health Survey.In the analysis at each time point, an improvement in the experimental group was also found in the Roland-Morris questionnaire, in the improvement percentage scale and in the response to treatment

Joint torques in a freely walking insect reveal distinct functions of leg joints in propulsion and posture control

PubMed Central

2016-01-01

Determining the mechanical output of limb joints is critical for understanding the control of complex motor behaviours such as walking. In the case of insect walking, the neural infrastructure for single-joint control is well described. However, a detailed description of the motor output in form of time-varying joint torques is lacking. Here, we determine joint torques in the stick insect to identify leg joint function in the control of body height and propulsion. Torques were determined by measuring whole-body kinematics and ground reaction forces in freely walking animals. We demonstrate that despite strong differences in morphology and posture, stick insects show a functional division of joints similar to other insect model systems. Propulsion was generated by strong depression torques about the coxa–trochanter joint, not by retraction or flexion/extension torques. Torques about the respective thorax–coxa and femur–tibia joints were often directed opposite to fore–aft forces and joint movements. This suggests a posture-dependent mechanism that counteracts collapse of the leg under body load and directs the resultant force vector such that strong depression torques can control both body height and propulsion. Our findings parallel propulsive mechanisms described in other walking, jumping and flying insects, and challenge current control models of insect walking. PMID:26791608

A family of models for spherical stellar systems

NASA Technical Reports Server (NTRS)

Tremaine, Scott; Richstone, Douglas O.; Byun, Yong-Ik; Dressler, Alan; Faber, S. M.; Grillmair, Carl; Kormendy, John; Lauer, Tod R.

1994-01-01

We describe a one-parameter family of models of stable sperical stellar systems in which the phase-space distribution function depends only on energy. The models have similar density profiles in their outer parts (rho propotional to r(exp -4)) and central power-law density cusps, rho proportional to r(exp 3-eta), 0 less than eta less than or = 3. The family contains the Jaffe (1983) and Hernquist (1990) models as special cases. We evaluate the surface brightness profile, the line-of-sight velocity dispersion profile, and the distribution function, and discuss analogs of King's core-fitting formula for determining mass-to-light ratio. We also generalize the models to a two-parameter family, in which the galaxy contains a central black hole; the second parameter is the mass of the black hole. Our models can be used to estimate the detectability of central black holes and the velocity-dispersion profiles of galaxies that contain central cusps, with or without a central black hole.

Early Osteoarthritis of the Trapeziometacarpal Joint Is Not Associated With Joint Instability during Typical Isometric Loading

PubMed Central

Halilaj, Eni; Moore, Douglas C.; Patel, Tarpit K.; Ladd, Amy L.; Weiss, Arnold-Peter C.; Crisco, Joseph J.

2015-01-01

The saddle-shaped trapeziometacarpal (TMC) joint contributes importantly to the function of the human thumb. A balance between mobility and stability is essential in this joint, which experiences high loads and is prone to osteoarthritis (OA). Since instability is considered a risk factor for TMC OA, we assessed TMC joint instability during the execution of three isometric functional tasks (key pinch, jar grasp, and jar twist) in 76 patients with early TMC OA and 44 asymptomatic controls. Computed tomography images were acquired while subjects held their hands relaxed and while they applied 80% of their maximum effort for each task. Six degree-of-freedom rigid body kinematics of the metacarpal with respect to the trapezium from the unloaded to the loaded task positions were computed in terms of a TMC joint coordinate system. Joint instability was expressed as a function of the metacarpal translation and the applied force. We found that the TMC joint was more unstable during a key pinch task than during a jar grasp or a jar twist task. Sex, age, and early OA did not have an effect on TMC joint instability, suggesting that instability during these three tasks is not a predisposing factor in TMC OA. PMID:25941135

The Integration of a Family Systems Approach for Understanding Youth Obesity, Physical Activity, and Dietary Programs

PubMed Central

Wilson, Dawn K.; St. George, Sara M.; Lawman, Hannah; Segal, Michelle; Fairchild, Amanda

2012-01-01

Rates of overweight in youth have reached epidemic proportions and are associated with adverse health outcomes. Family-based programs have been widely used to treat overweight in youth. However, few programs incorporate a theoretical framework for studying a family systems approach in relation to youth health behavior change. Therefore, this review provides a family systems theory framework for evaluating family-level variables in weight loss, physical activity, and dietary approaches in youth. Studies were reviewed and effect sizes were calculated for interventions that manipulated the family system, including components that targeted parenting styles, parenting skills, or family functioning, or which had novel approaches for including the family. Twenty-one weight loss interventions were identified, and 25 interventions related to physical activity and/or diet were identified. Overall, family-based treatment programs that incorporated training for authoritative parenting styles, parenting skills, or child management, and family functioning had positive effects on youth weight loss. Programs to improve physical activity and dietary behaviors that targeted the family system also demonstrated improvements in youth health behaviors; however, direct effects of parent-targeted programming is not clear. Both treatment and prevention programs would benefit from evaluating family functioning and parenting styles as possible mediators of intervention outcomes. Recommendations are provided to guide the development of future family-based obesity prevention and treatment programs for youth. PMID:20689989

Intelligent transportation systems and their implications for railroads : proceedings of a joint FRA-ITS America technical symposium

DOT National Transportation Integrated Search

1998-03-01

The Federal Railroad Administration and the Intelligent Transportation Society of America (ITS America) convened a joint Technical Symposium on June 4 and 5, 1997, on the subject "Intelligent Transportation Systems and Their Implications for Railroad...

The Durham Family Initiative: A Preventive System of Care

ERIC Educational Resources Information Center

Dodge, Kenneth A.; Berlin, Lisa J.; Epstein, Matthew; Spitz-Roth, Adele; O'Donnell, Karen; Kaufman, Martha; Amaya-Jackson, Lisa; Rosch, Joel; Christopoulos, Christina

2004-01-01

This article describes the Durham Family Initiative (DFI), an innovative effort to bring together child welfare and juvenile justice systems to reach DFI's goal of reducing the child abuse rate in Durham, North Carolina, by 50% within the next 10 years. DFI will follow principles of a preventive system of care (PSoC), which focuses on nurturing…

A joint precoding scheme for indoor downlink multi-user MIMO VLC systems

NASA Astrophysics Data System (ADS)

Zhao, Qiong; Fan, Yangyu; Kang, Bochao

2017-11-01

In this study, we aim to improve the system performance and reduce the implementation complexity of precoding scheme for visible light communication (VLC) systems. By incorporating the power-method algorithm and the block diagonalization (BD) algorithm, we propose a joint precoding scheme for indoor downlink multi-user multi-input-multi-output (MU-MIMO) VLC systems. In this scheme, we apply the BD algorithm to eliminate the co-channel interference (CCI) among users firstly. Secondly, the power-method algorithm is used to search the precoding weight for each user based on the optimal criterion of signal to interference plus noise ratio (SINR) maximization. Finally, the optical power restrictions of VLC systems are taken into account to constrain the precoding weight matrix. Comprehensive computer simulations in two scenarios indicate that the proposed scheme always has better bit error rate (BER) performance and lower computation complexity than that of the traditional scheme.

Effects of neoprene wrist/hand splints on handwriting for students with joint hypermobility syndrome: a single system design study.

PubMed

Frohlich, Lauren; Wesley, Alison; Wallen, Margaret; Bundy, Anita

2012-08-01

Pain associated with hypermobility of wrist and hand joints can contribute to decreased handwriting output. This study examined the effectiveness of a neoprene wrist/hand splint in reducing pain and increasing handwriting speed and endurance for students with joint hypermobility syndrome. Multiple baseline, single system design (SSD) methodology was used. Four ninth grade students with handwriting difficulties because of joint hypermobility syndrome participated in this study. Visual and statistical (two standard deviation band method) analyses indicated a significant decrease in handwriting speed when using the splint for three out of four participants. No significant change in pain or endurance was noted during intervention. There was a significant decrease in pain following withdrawal of the splint for three participants. Evidence from this study does not support use of this particular splint for decreasing pain and increasing handwriting speed and endurance for ninth grade students with joint hypermobility syndrome.

Interrelationships between childbearing and housing transitions in the family life course.

PubMed

Kulu, Hill; Steele, Fiona

2013-10-01

Research has examined the effect of family changes on housing transitions and childbearing patterns within various housing types. Although most research has investigated how an event in one domain of family life depends on the current state in another domain, the interplay between them has been little studied. This study examines the interrelationships between childbearing decisions and housing transitions. We use rich longitudinal register data from Finland and apply multilevel event history analysis to allow for multiple births and housing changes over the life course. We investigate the timing of fertility decisions and housing choices with respect to each other. We model childbearing and housing transitions jointly to control for time-invariant unobserved characteristics of women, which may simultaneously influence their fertility behavior and housing choices, and we show how joint modeling leads to a deeper understanding of the interplay between the two domains of family life.

Joint Use of Public Schools: Developing a New Social Contract for the Shared Use of Public Schools

ERIC Educational Resources Information Center

Filardo, Mary; Vincent, Jeff M.; Allen, Marni; Franklin, Jason

2010-01-01

In this paper, the 21st Century School Fund and the Center for Cities and Schools at the University of California Berkeley provide a conceptual frame for the joint use of PK-12 public school buildings. There is a growing conversation about and demand for joint use as a way to provide services to children and families in convenient locations,…

75 FR 56548 - Joint Meeting of the Peripheral and Central Nervous System Drugs Advisory Committee and the Drug...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-16

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-N-0001] Joint Meeting of the Peripheral and Central Nervous System Drugs Advisory Committee and the Drug Safety... and Central Nervous System Drugs Advisory Committee and the Drug Safety and Risk Management Advisory...

45 CFR 1355.31 - Elements of the child and family services review system.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 4 2014-10-01 2014-10-01 false Elements of the child and family services review system. 1355.31 Section 1355.31 Public Welfare Regulations Relating to Public Welfare (Continued) OFFICE..., YOUTH AND FAMILIES, FOSTER CARE MAINTENANCE PAYMENTS, ADOPTION ASSISTANCE, AND CHILD AND FAMILY SERVICES...

45 CFR 1355.31 - Elements of the child and family services review system.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 45 Public Welfare 4 2012-10-01 2012-10-01 false Elements of the child and family services review system. 1355.31 Section 1355.31 Public Welfare Regulations Relating to Public Welfare (Continued) OFFICE..., YOUTH AND FAMILIES, FOSTER CARE MAINTENANCE PAYMENTS, ADOPTION ASSISTANCE, AND CHILD AND FAMILY SERVICES...

45 CFR 1355.31 - Elements of the child and family services review system.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 45 Public Welfare 4 2011-10-01 2011-10-01 false Elements of the child and family services review system. 1355.31 Section 1355.31 Public Welfare Regulations Relating to Public Welfare (Continued) OFFICE..., YOUTH AND FAMILIES, FOSTER CARE MAINTENANCE PAYMENTS, ADOPTION ASSISTANCE, AND CHILD AND FAMILY SERVICES...

Why involve families in acute mental healthcare? A collaborative conceptual review.

PubMed

Dirik, Aysegul; Sandhu, Sima; Giacco, Domenico; Barrett, Katherine; Bennison, Gerry; Collinson, Sue; Priebe, Stefan

2017-09-27

Family involvement is strongly recommended in clinical guidelines but suffers from poor implementation. To explore this topic at a conceptual level, a multidisciplinary review team including academics, clinicians and individuals with lived experience undertook a review to explore the theoretical background of family involvement models in acute mental health treatment and how this relates to their delivery. A conceptual review was undertaken, including a systematic search and narrative synthesis. Included family models were mapped onto the most commonly referenced underlying theories: the diathesis-stress model, systems theories and postmodern theories of mental health. Common components of the models were summarised and compared. Lastly, a thematic analysis was undertaken to explore the role of patients and families in the delivery of the approaches. General adult acute mental health treatment. Six distinct family involvement models were identified: Calgary Family Assessment and Intervention Models, ERIC (Equipe Rapide d'Intervention de Crise), Family Psychoeducation Models, Family Systems Approach, Open Dialogue and the Somerset Model. Findings indicated that despite wide variation in the theoretical models underlying family involvement models, there were many commonalities in their components, such as a focus on communication, language use and joint decision-making. Thematic analysis of the role of patients and families identified several issues for implementation. This included potential harms that could emerge during delivery of the models, such as imposing linear 'patient-carer' relationships and the risk of perceived coercion. We conclude that future staff training may benefit from discussing the chosen family involvement model within the context of other theories of mental health. This may help to clarify the underlying purpose of family involvement and address the diverse needs and world views of patients, families and professionals in acute settings. �

Joint measurement of multiple noncommuting parameters

NASA Astrophysics Data System (ADS)

Li, Jiamin; Liu, Yuhong; Cui, Liang; Huo, Nan; Assad, Syed M.; Li, Xiaoying; Ou, Z. Y.

2018-05-01

Although quantum metrology allows us to make precision measurements beyond the standard quantum limit, it mostly works on the measurement of only one observable due to the Heisenberg uncertainty relation on the measurement precision of noncommuting observables for one system. In this paper, we study the schemes of joint measurement of multiple observables which do not commute with each other using the quantum entanglement between two systems. We focus on analyzing the performance of a SU(1,1) nonlinear interferometer on fulfilling the task of joint measurement. The results show that the information encoded in multiple noncommuting observables on an optical field can be simultaneously measured with a signal-to-noise ratio higher than the standard quantum limit, and the ultimate limit of each observable is still the Heisenberg limit. Moreover, we find a resource conservation rule for the joint measurement.

A general multiscroll Lorenz system family and its realization via digital signal processors.