Non-Formal Education as a Factor in Civilizational Development of Educational Space Subject in the Cross-Border Region

ERIC Educational Resources Information Center

Dugarova, Dulma T.; Starostina, Svetlana E.; Namsarayev, Sergey D.; Dagbaeva, Nina Zh.; Malanov, Innokentiy A.

2016-01-01

The research is aimed at determining the organizational and pedagogical conditions of nonformal education implementation as a factor in civilizational development of subjects, joint international projects performers, in the educational space of the cross-border region. New integration projects forming the need for effective models implementation…

Service-Learning Linking Family Child Care Providers, Community Partners, and Preservice Professionals

ERIC Educational Resources Information Center

Garner, Pamela W.; Parker, Tameka S.

2016-01-01

This article describes the implementation of a service-learning project, which was infused into a child development course. The project linked family child care providers, their licensing agency, and 39 preservice teachers in a joint effort to develop a parent handbook to be used by the providers in their child care businesses and to support…

AGRI Grain Power ethanol-for-fuel project feasibility-study report. Volume II. Project marketing/economic/financial/ and organization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1981-04-01

The AGRI GRAIN POWER (AGP) project, hereafter referred to as the Project, was formed to evaluate the commercial viability and assess the desireability of implementing a large grain based grass-roots anhydrous ethanol fuel project to be sited near Des Moines, Iowa. This report presents the results of a Project feasibility evaluation. The Project concept is based on involving a very strong managerial, financial and technical joint venture that is extremely expert in all facets of planning and implementing a large ethanol project; on locating the ethanol project at a highly desireable site; on utilizing a proven ethanol process; and onmore » developing a Project that is well suited to market requirements, resource availability and competitive factors. The results of marketing, economic, and financial studies are reported in this volume.« less

AGRI Grain Power ethanol-for-fuel project feasibility-study report. Volume III. Project environmental/health/safety/ and socioeconomic

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1981-04-01

The AGRI GRAIN POWER (AGP) project, hereafter referred to as the Project, was formed to evaluate the commercial viability and assess the desireability of implementing a large grain based grass-roots anhydrous ethanol fuel project to be sited near Des Moines, Iowa. This report presents the results of a Project feasibility evaluation. The Project concept is based on involving a very strong managerial, financial and technical joint venture that is extremely expert in all facets of planning and implementing a large ethanol project; on locating the ethanol project at a highly desireable site; on utilizing a proven ethanol process; and onmore » developing a Project that is well suited to market requirements, resource availability and competitive factors. This volume contains the results of the environmental, health, safety, and socio-economic studies.« less

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM ANNUAL REPORT TO CONGRESS FY2000

EPA Science Inventory

The Superfund Innovative Technology Evaluation Program promotes the development, commercialization, and implementation of innovative hazardous waste treatment technologies. SITE offers a mechanism for conducting joint demonstration and evaluation projects at hazardous waste site...

US/Brazil joint pilot project objectives

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-12-01

This paper describes a joint US/Brazil pilot project for rural electrification, whose major goals are: to establish technical, institutional, and economic confidence in using renewable energy (PV and wind) to meet the needs of the citizens of rural Brazil; to establish on-going institutional, individual and business relationships necessary to implement sustainable programs and commitments; to lay the groundwork for larger scale rural electrification through the use of distributed renewable technologies. The projects have supported low power home lighting systems, lighting and refrigeration for schools and medical centers, and water pumping systems. This is viewed as a long term project, wheremore » much of the equipment will come from the US, but Brazil will be responsible for program management, and sharing data gained from the program. The paper describes in detail the Brazilian program which was instituted to support this phased project.« less

Forest Protection and Reforestation in Costa Rica: Evaluation of a Clean Development Mechanism Prototype.

PubMed

Subak

2000-09-01

/ Costa Rica has recently established a program that provides funds for reforestation and forest protection on private lands, partly through the sale of carbon certificates to industrialized countries. Countries purchasing these carbon offsets hope one day to receive credit against their own commitments to limit emissions of greenhouse gases. Costa Rica has used the proceeds of the sale of carbon offsets to Norway to help finance this forest incentive program, called the Private Forestry Project, which pays thousands of participants to reforest or protect forest on their lands. The Private Forestry Project is accompanied by a monitoring program conducted by Costa Rican forest engineers that seeks to determine net carbon storage accomplished on these lands each year. The Private Forestry Project, which is officially registered as an Activity Implemented Jointly, is a possible model for bundled projects funded by the Clean Development Mechanism (CDM) established by the 1997 Kyoto Protocol to the UN Framework Convention on Climate Change. It also serves as an interesting example for the CDM because it was designed by a developing country host-not by an industrialized country investor. Accordingly, it reflects the particular "sustainable development" objectives of the host country or at least the host planners. Early experience in implementing the Private Forestry Project is evaluated in light of the main objectives of the CDM and its precursor-Activities Implemented Jointly. It is concluded that the project appears to meet the criteria of global cost-effectiveness and financing from non-ODA sources. The sustainable development implications of the project are specific to the region and would not necessarily match the ideals of all investing and developing countries. The project may be seen to achieve additional greenhouse gas abatement when compared against some (although not all) baselines.

Operational Energy Strategy: Implementation Plan

DTIC Science & Technology

2012-03-01

U.S. forces to obtain the energy required to perform their missions. To achieve this goal, the Department will identify and remediate energy-related...construction projects related to hydropower and biogas to build local capacity in Afghanistan. Responsibilities. The Joint Staff and Military

Mechanical Engineering Design Project report: Enabler control systems

NASA Technical Reports Server (NTRS)

Cullen, Christian; Delvecchio, Dave; Scarborough, Alan; Havics, Andrew A.

1992-01-01

The Controls Group was assigned the responsibility for designing the Enabler's control system. The requirement for the design was that the control system must provide a simple user interface to control the boom articulation joints, chassis articulation joints, and the wheel drive. The system required controlling hydraulic motors on the Enabler by implementing 8-bit microprocessor boards. In addition, feedback to evaluate positions and velocities must be interfaced to provide the operator with confirmation as well as control.

Samling pa mattan: En utvardering av integrerad skolbarnsomsorg (SKOBO) inom Finspangs Kommun (Integration of Pre-School and School Children).

ERIC Educational Resources Information Center

Bergeling, Ann-Sofie; Gustavsson, Maria

This study evaluated a project for integrating preschool- and school-age children in a joint educational program. The integration project (SKOBO) has been implemented in all education units in the investigated municipality. Each school has, however, had a considerable degree of freedom in carrying out the program with the potential to find its…

Knowledge representation into Ada parallel processing

NASA Technical Reports Server (NTRS)

Masotto, Tom; Babikyan, Carol; Harper, Richard

1990-01-01

The Knowledge Representation into Ada Parallel Processing project is a joint NASA and Air Force funded project to demonstrate the execution of intelligent systems in Ada on the Charles Stark Draper Laboratory fault-tolerant parallel processor (FTPP). Two applications were demonstrated - a portion of the adaptive tactical navigator and a real time controller. Both systems are implemented as Activation Framework Objects on the Activation Framework intelligent scheduling mechanism developed by Worcester Polytechnic Institute. The implementations, results of performance analyses showing speedup due to parallelism and initial efficiency improvements are detailed and further areas for performance improvements are suggested.

LINKING WATERFOWL WITH CONTAMINANT SPECIATION IN RIPARIAN SOILS

EPA Science Inventory

This report summarizes the results of Mine Waste Technology Program (MWTP) Activity III, Project 38, Linking Waterfowl with Contaminant Speciation in Riparian Soils, implemented and funded by the U.S. Environmental Protection Agency (EPA) and jointly administered by EPA and the U...

Assessing Technical Training Needs.

ERIC Educational Resources Information Center

Schwaller, Anthony E.; Slipy, Dave

1985-01-01

Describes the results of a joint project of St. Cloud State University (Minnesota) and DeZURIK Corporation (a manufacturer and distributor of industrial valves) which developed and implemented a technical training needs questionnaire for use with the company's employees. Student involvement in the process is noted. (MBR)

Modular and Spatially Explicit: A Novel Approach to System Dynamics

EPA Science Inventory

The Open Modeling Environment (OME) is an open-source System Dynamics (SD) simulation engine which has been created as a joint project between Oregon State University and the US Environmental Protection Agency. It is designed around a modular implementation, and provides a standa...

External Tank (ET) Bipod Fitting Bolted Attachment Locking Insert Performance

NASA Technical Reports Server (NTRS)

Larsen, Curtis E.; Wilson, Tim R.; Elliott, Kenny B.; Raju, Ivatury S.; McManamen, John

2008-01-01

Following STS-107, the External Tank (ET) Project implemented corrective actions and configuration changes at the ET bipod fitting. Among the corrective actions, the existing bolt lock wire which provided resistance to potential bolt rotation was removed. The lock wire removal was because of concerns with creating voids during foam application and potential for lock wire to become debris. The bolts had been previously lubricated to facilitate assembly but, because of elimination of the lock wire, the ET Project wanted to enable the locking feature of the insert. Thus, the lubrication was removed from bolt threads and instead applied to the washer under the bolt head. Lubrication is necessary to maximize joint pre-load while remaining within the bolt torque specification. The locking feature is implemented by thread crimping in at four places in the insert. As the bolt is torqued into the insert the bolt threads its way past the crimped parts of the insert. This provides the locking of the bolt, as torque is required to loosen the joint after clamping.

Envri Cluster - a Community-Driven Platform of European Environmental Researcher Infrastructures for Providing Common E-Solutions for Earth Science

NASA Astrophysics Data System (ADS)

Asmi, A.; Sorvari, S.; Kutsch, W. L.; Laj, P.

2017-12-01

European long-term environmental research infrastructures (often referred as ESFRI RIs) are the core facilities for providing services for scientists in their quest for understanding and predicting the complex Earth system and its functioning that requires long-term efforts to identify environmental changes (trends, thresholds and resilience, interactions and feedbacks). Many of the research infrastructures originally have been developed to respond to the needs of their specific research communities, however, it is clear that strong collaboration among research infrastructures is needed to serve the trans-boundary research requires exploring scientific questions at the intersection of different scientific fields, conducting joint research projects and developing concepts, devices, and methods that can be used to integrate knowledge. European Environmental research infrastructures have already been successfully worked together for many years and have established a cluster - ENVRI cluster - for their collaborative work. ENVRI cluster act as a collaborative platform where the RIs can jointly agree on the common solutions for their operations, draft strategies and policies and share best practices and knowledge. Supporting project for the ENVRI cluster, ENVRIplus project, brings together 21 European research infrastructures and infrastructure networks to work on joint technical solutions, data interoperability, access management, training, strategies and dissemination efforts. ENVRI cluster act as one stop shop for multidisciplinary RI users, other collaborative initiatives, projects and programmes and coordinates and implement jointly agreed RI strategies.

NICA project management information system

NASA Astrophysics Data System (ADS)

Bashashin, M. V.; Kekelidze, D. V.; Kostromin, S. A.; Korenkov, V. V.; Kuniaev, S. V.; Morozov, V. V.; Potrebenikov, Yu. K.; Trubnikov, G. V.; Philippov, A. V.

2016-09-01

The science projects growth, changing of the efficiency criteria during the project implementation require not only increasing of the management specialization level but also pose the problem of selecting the effective planning methods, monitoring of deadlines and interaction of participants involved in research projects. This paper is devoted to choosing the project management information system for the new heavy-ion collider NICA (Nuclotron based Ion Collider fAcility). We formulate the requirements for the project management information system with taking into account the specifics of the Joint Institute for Nuclear Research (JINR, Dubna, Russia) as an international intergovernmental research organization, which is developed on the basis of a flexible and effective information system for the NICA project management.

Joint Probabilistic Projection of Female and Male Life Expectancy

PubMed Central

Raftery, Adrian E.; Lalic, Nevena; Gerland, Patrick

2014-01-01

BACKGROUND The United Nations (UN) produces population projections for all countries every two years. These are used by international organizations, governments, the private sector and researchers for policy planning, for monitoring development goals, as inputs to economic and environmental models, and for social and health research. The UN is considering producing fully probabilistic population projections, for which joint probabilistic projections of future female and male life expectancy at birth are needed. OBJECTIVE We propose a methodology for obtaining joint probabilistic projections of female and male life expectancy at birth. METHODS We first project female life expectancy using a one-sex method for probabilistic projection of life expectancy. We then project the gap between female and male life expectancy. We propose an autoregressive model for the gap in a future time period for a particular country, which is a function of female life expectancy and a t-distributed random perturbation. This method takes into account mortality data limitations, is comparable across countries, and accounts for shocks. We estimate all parameters based on life expectancy estimates for 1950–2010. The methods are implemented in the bayesLife and bayesPop R packages. RESULTS We evaluated our model using out-of-sample projections for the period 1995–2010, and found that our method performed better than several possible alternatives. CONCLUSIONS We find that the average gap between female and male life expectancy has been increasing for female life expectancy below 75, and decreasing for female life expectancy above 75. Our projections of the gap are lower than the UN’s 2008 projections for most countries and so lead to higher projections of male life expectancy. PMID:25580082

FJET Database Project: Extract, Transform, and Load

NASA Technical Reports Server (NTRS)

Samms, Kevin O.

2015-01-01

The Data Mining & Knowledge Management team at Kennedy Space Center is providing data management services to the Frangible Joint Empirical Test (FJET) project at Langley Research Center (LARC). FJET is a project under the NASA Engineering and Safety Center (NESC). The purpose of FJET is to conduct an assessment of mild detonating fuse (MDF) frangible joints (FJs) for human spacecraft separation tasks in support of the NASA Commercial Crew Program. The Data Mining & Knowledge Management team has been tasked with creating and managing a database for the efficient storage and retrieval of FJET test data. This paper details the Extract, Transform, and Load (ETL) process as it is related to gathering FJET test data into a Microsoft SQL relational database, and making that data available to the data users. Lessons learned, procedures implemented, and programming code samples are discussed to help detail the learning experienced as the Data Mining & Knowledge Management team adapted to changing requirements and new technology while maintaining flexibility of design in various aspects of the data management project.

Remote sensing in Michigan for land resource management

NASA Technical Reports Server (NTRS)

Sattinger, I. J.

1972-01-01

This project to demonstrate the application of earth resource survey technology to current problems in Michigan was undertaken jointly by the Environmental Research Institute of Michigan and Michigan State University. Remote sensing techniques were employed to advantage in providing management information for the Pointe Mouillee State Game Area and preparing an impact assessment in advance of the projected construction of the M-14 freeway from Ann Arbor to Plymouth, Michigan. The project also assisted the state government in its current effort to develop and implement a state-wide land management plan.

Implementation of preventive mental health services for children of physically ill parents: experiences in seven European countries and health care systems.

PubMed

Kühne, Franziska; Haagen, Miriam; Baldus, Christiane; Diareme, Stavroula; Grether, Andrea; Schmitt, Florence; Stanescu, Dan; Stöckl, Margit; Thastum, Mikael; Möller, Birgit; Romer, Georg

2013-01-01

Parental physical disease is a family issue, but families' minor children are seldom considered. The current study analyzed experiences with implementation of counseling for families with physically ill parents and minor children during a European multisite pilot project. Implementation protocols of seven European partner centers collaborating in a joint research project were analyzed by Mayring's qualitative content analysis. Both an inductive approach and a deductive approach were chosen. Satisfaction of families and therapists was considered based on information from three partner centers. Satisfaction with counseling was rather high. Mentioned problems referred to aspects related to liaison partners, family-related aspects and physicians' concerns. Recommendations related to contacting families, liaising with other professions, implementing counseling together with a research project, and training. Results are integrated in the current dissemination literature. Successful implementation was mostly determined by aspects of interdisciplinary cooperation and communication, perceived relative advantage and organizational premises. With regard to this kind of innovative child-centered family mental health services, top-down and bottom-up implementation strategies should be combined, and strategies of maintenance and sustainability should be considered from the very beginning. Copyright © 2013 Elsevier Inc. All rights reserved.

Defense AR Journal, Volume 15, Number 1, April 2008

DTIC Science & Technology

2008-04-01

Beavers William Ruta DAUAA Research Paper Competition: 3rd Place Employing Organizational Modeling & Simulation of the KC-135 Depot’s Flight Controls Maj...AttAck munition SYStemS (jAmS) Project office imProvinG SuPPort to the wArfiGhter Barry Beavers and William Ruta The Joint Attack Munition Systems...William Ruta . This paper examines how the JAMS Project Office improved support to the warfighter with its implementation of the Life Cycle

Hip2Norm: an object-oriented cross-platform program for 3D analysis of hip joint morphology using 2D pelvic radiographs.

PubMed

Zheng, G; Tannast, M; Anderegg, C; Siebenrock, K A; Langlotz, F

2007-07-01

We developed an object-oriented cross-platform program to perform three-dimensional (3D) analysis of hip joint morphology using two-dimensional (2D) anteroposterior (AP) pelvic radiographs. Landmarks extracted from 2D AP pelvic radiographs and optionally an additional lateral pelvic X-ray were combined with a cone beam projection model to reconstruct 3D hip joints. Since individual pelvic orientation can vary considerably, a method for standardizing pelvic orientation was implemented to determine the absolute tilt/rotation. The evaluation of anatomically morphologic differences was achieved by reconstructing the projected acetabular rim and the measured hip parameters as if obtained in a standardized neutral orientation. The program had been successfully used to interactively objectify acetabular version in hips with femoro-acetabular impingement or developmental dysplasia. Hip(2)Norm is written in object-oriented programming language C++ using cross-platform software Qt (TrollTech, Oslo, Norway) for graphical user interface (GUI) and is transportable to any platform.

An International Knowledge Building Network for Sustainable Curriculum and Pedagogical Innovation

ERIC Educational Resources Information Center

Laferrière, Thérèse; Law, Nancy; Montané, Mireia

2012-01-01

This paper presents the results of the first phase (2007-2009) of a design experiment, the Knowledge Building International Project (KBIP), in which K-12 teachers from several countries collaborate as a loosely coupled network of networks with a common goal--to implement technology-supported knowledge building jointly across their classrooms.…

How to Get JDRP Approval of Career Education Activities.

ERIC Educational Resources Information Center

Hamilton, Jack A.

The purpose of this monograph is to aid practitioners in gaining federal Joint Dissemination Review Panel (JDRP) approval of career education projects. It helps them understand the importance of designing and implementing a sound evaluation from the early stages of the program, alerts them to common errors or omissions that weaken or destroy…

Report of the Joint Industry - DoD Task Force on Computer Aided Logistic Support (CALS). Volume 3. Report of Architecture Subgroup.

DTIC Science & Technology

1985-06-01

competitive commercial items such as automobiles and aircraft. 1.3 Implementation Considerations. 1.3.1 Technical Considerations. The major technical...and easily reprogrammable discs; and integrated portable videocomputer devices will become available. 13 139 1 1.2 Projected Performance of the Target

Building Capacity in the Sikh Asian Indian Community to Lead Participatory Oral Health Projects.

PubMed

Kavathe, Rucha; Islam, Nadia; Zanowiak, Jennifer; Wyatt, Laura; Singh, Hardayal; Northridge, Mary E

2018-01-01

Lack of access to oral health care is a significant burden for disadvantaged populations, yet rarely draws the attention of policymakers or community leaders. To understand how UNITED SIKHS identified oral health care as a priority need through its involvement in community-based participatory research (CBPR) initiatives and local data collection, thereby building its capacity to lead participatory oral health projects. The foundation for the partnership between UNITED SIKHS and the New York University (NYU) Prevention Research Center (PRC) was the joint implementation of a CBPR project to prevent diabetes in the Sikh Asian Indian community. Project partners also included a community coalition composed of religious leaders, health providers, members of the media, and dental students and faculty at the NYU College of Dentistry (NYU Dentistry). A community needs and resources assessment survey was jointly developed and conducted in 2010 to better understand health needs in the Sikh community. Fewer than one-half of the Sikh participants (43.0%) reported ever receiving a check-up or screening by a dentist, and of those who did, only one-half (50.0%) reported that it occurred in the past 12 months. Upon clinical assessment, more than one-half of Sikh adults (58.2%) had untreated dental decay. The collection and analysis of local data motivated UNITED SIKHS to develop new priorities based upon the findings. UNITED SIKHS applied for and received external funding to lead a CBPR project that developed, implemented, evaluated, and disseminated a culturally tailored oral health and healthy living curriculum for the Sikh Asian Indian community.

Building Capacity in the Sikh Asian Indian Community to Lead Participatory Oral Health Projects

PubMed Central

Kavathe, Rucha; Islam, Nadia; Zanowiak, Jennifer; Wyatt, Laura; Singh, Hardayal; Northridge, Mary E.

2018-01-01

Background Lack of access to oral health care is a significant burden for disadvantaged populations, yet rarely draws the attention of policymakers or community leaders. Objectives To understand how UNITED SIKHS identified oral health care as a priority need through its involvement in community-based participatory research (CBPR) initiatives and local data collection, thereby building its capacity to lead participatory oral health projects. Methods The foundation for the partnership between UNITED SIKHS and the New York University (NYU) Prevention Research Center (PRC) was the joint implementation of a CBPR project to prevent diabetes in the Sikh Asian Indian community. Project partners also included a community coalition composed of religious leaders, health providers, members of the media, and dental students and faculty at the NYU College of Dentistry (NYU Dentistry). A community needs and resources assessment survey was jointly developed and conducted in 2010 to better understand health needs in the Sikh community. Results Fewer than one-half of the Sikh participants (43.0%) reported ever receiving a check-up or screening by a dentist, and of those who did, only one-half (50.0%) reported that it occurred in the past 12 months. Upon clinical assessment, more than one-half of Sikh adults (58.2%) had untreated dental decay. The collection and analysis of local data motivated UNITED SIKHS to develop new priorities based upon the findings. Conclusions UNITED SIKHS applied for and received external funding to lead a CBPR project that developed, implemented, evaluated, and disseminated a culturally tailored oral health and healthy living curriculum for the Sikh Asian Indian community. PMID:29606688

Adapted hydropower-driven water supply system: assessment of an underground application in an Indonesian karst area

NASA Astrophysics Data System (ADS)

Oberle, P.; Ikhwan, M.; Stoffel, D.; Nestmann, F.

2016-09-01

Populated karst landscapes can be found all over the world, although their natural boundary conditions mostly lead to distinct challenges regarding a sustainable water supply. Especially in developing and emerging countries, this situation aggravates since appropriate technologies and water management concepts are rarely available. Against this background, the interdisciplinary, German-Indonesian joint project " Integrated Water Resources Management (IWRM) Indonesia", funded by the German Federal Ministry of Education and Research (BMBF), focused on the development and exemplary implementation of adapted techniques to remedy the partly severe water scarcity in the region Gunung Sewu. This karst area, widely known as " Java's poorhouse", is located on the southern coast of Java Island and distinctly suffers from the mentioned constraints. Under the aegis of the Karlsruhe Institute of Technology (KIT), the conceptual and technical achievements of the "IWRM Indonesia" joint research project are characterized by a high potential for multiplication not only for karst areas but also for non-karst regions. One of the project's major accomplishments is the erection of an innovative hydropower-driven water supply facility located in a karst cave 100 m below ground and continuously supplying tens of thousands of people with fresh water. Referring to the plant's innovative character and the demanding conditions on-site, the implementation was a highly iterative process leading to today's autonomous operation by an Indonesian public authority. Based on the experiences gained during design, construction, operation and monitoring phase, this paper introduces an implementation approach for adapted technologies as well as a comprising technical and economical assessment of the plant's operation.

Development and implementation of a writing program to improve resident authorship rates.

PubMed

Clemmons, Amber Bradley; Hoge, Stephanie C; Cribb, Ashley; Manasco, Kalen B

2015-09-01

The development, implementation, and evaluation of a writing program with a formalized writing project as a component of postgraduate year 1 (PGY1) and postgraduate year 2 (PGY2) pharmacy residencies are described. The writing program at Georgia Regents Medical Center/University of Georgia College of Pharmacy, a collaborative and jointly funded program, was initiated in the 2010-11 residency year. The goals of the program are to teach residents to communicate effectively, apply leadership skills, employ project management skills, and provide medication- and practice- related education and training. The program combines both writing experiences and mentorship. At the beginning of the residency year, trainees are presented with opportunities to participate in both research projects and writing projects. Specifically, opportunities within the writing program include involvement in review articles, case reports, drug information rounds, book chapters, letters to the editor, and high-quality medication-use evaluations for potential publication. The writing project is highly encouraged, and completion of a manuscript to be submitted for publication is expected by graduation. Nine papers were published by 8 of 18 PGY1 and PGY2 residents in the four years before program implementation. A total of 23 publications were published by 18 (72%) of the 25 PGY1 and PGY2 residents in the four years after implementation of the writing program. Implementation of a formal writing program increased the overall publication rate of residents. Copyright © 2015 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

How Intersectoral Health Promotion Changes Professional Practices: A Case Study From Denmark.

PubMed

Christensen, Mads; Burau, Viola; Ledderer, Loni

2018-05-01

Intersectoral health promotion (IHP) has pushed health professions to engage in new tasks and interprofessional ways of working. We studied how care assistants from a nursing home and school teachers implemented a cookery project targeted at children ("Cool Beans") as an example of an IHP project in Denmark. Our aim was to examine the impact of the IHP project on the practices of the professions involved. We used a qualitative case study to investigate joint care and teaching situations with the two professions and their users. Our data consisted of documents, participatory observations, and informal interviews (17 hours) as well as semistructured interviews with professionals (n = 4). We used a sociological institutional framework to analyze the professional practices emerging in joint care and teaching situations and identified three themes of new professional activities: (1) "interplay" related to making different generations collaborate on the tasks involved in the cookery session; (2) "care" concerned with caregiving activities; and (3) "learning" focused on schooling on healthy food and cooking. We conclude that changes in professional practices occurred informally and were induced by the concrete activities in the cookery project. The specific, practical tasks of the IHP project thus offered an important leverage for future interprofessional collaborations.

Lightning Protection and Structural Bonding for the B2 Test Stand

NASA Technical Reports Server (NTRS)

Kinard, Brandon

2015-01-01

With the privatization of the space industry, NASA has entered a new era. To explore deeper parts of the solar system, NASA is developing a new spacecraft, the Space Launch System (SLS), capable of reaching these destinations, such as an asteroid or Mars. However, the test stand that is capable of testing the stage has been unused for many years. In addition to the updating/repair of the stand, more steel is being added to fully support the SLS. With all these modifications, the lightning protection system must be brought up to code to assure the protection of all personnel and assets. Structural bonding is a part of the lightning protection system. The focus of this project was to assure proper structural bonding. To begin, all relevant technical standards and the construction specifications were reviewed. This included both the specifications for the lightning protection and for general construction. The drawings were reviewed as well. From the drawings, bolted structural joints were reviewed to determine whether bonding was necessary. Several bolted joints were determined to need bonding according to the notes in the drawings. This exceeds the industry standards. The bolted joints are an electrically continuous joint. During tests, the stand experiences heavy vibration that may weaken the continuity of the bolted joint. Therefore, the secondary bonding is implemented to ensure that the structural joint has low resistance. If the structural joint has a high resistance because of corrosion, a potential gradient can occur that can cause a side flash. Damage, injury, or death can occur from a side flash so they are to be prevented. A list of the identified structural joints was compiled and sent to the contractor to be bonded. That covers the scope of this project.

Action-learning collaboratives as a platform for community-based participatory research to advance obesity prevention.

PubMed

Bazos, Dorothy A; Schifferdecker, Karen E; Fedrizzi, Rudolph; Hoebeke, Jaime; Ruggles, Laural; Goldsberry, Yvonne

2013-01-01

Although process elements that define community-based participatory research (CBPR) are well articulated and provide guidance for bringing together researchers and communities, additional models to implement CBPR are needed. One potential model for implementing and monitoring CBPR is Action Learning Collaboratives (ALCs); short term, team-based learning processes that are grounded in quality improvement. Since 2010, the Prevention Research Center at Dartmouth (PRCD) has used ALCs with three communities as a platform to design, implement and evaluate CBPR. The first ALC provided an opportunity for academia and community leadership to strengthen their relationships and knowledge of respective assets through design and evaluation of community-based QI projects. Building on this work, we jointly designed and are implementing a second ALC, a cross-community research project focused on obesity prevention in vulnerable populations. An enhanced community capacity now exists to support CBPR activities with a high degree of sophistication and decreased reliance on external facilitation.

7 CFR 3405.7 - Joint project proposals.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 15 2011-01-01 2011-01-01 false Joint project proposals. 3405.7 Section 3405.7... AGRICULTURE HIGHER EDUCATION CHALLENGE GRANTS PROGRAM Program Description § 3405.7 Joint project proposals. Applicants are encouraged to submit joint project proposals as defined in § 3405.2(m), which address regional...

PLANNING AND COORDINATION OF ACTIVITIES SUPPORTING THE RUSSIAN SYSTEM OF CONTROL AND ACCOUNTING OF NUCLEAR MATERIALS AT ROSATOM FACILITIES IN THE FRAMEWORK OF THE U.S.-RUSSIAN COOPERATION.

DOE Office of Scientific and Technical Information (OSTI.GOV)

SVIRIDOVA, V.V.; ERASTOV, V.V.; ISAEV, N.V.

2005-05-16

The MC&A Equipment and Methodological Support Strategic Plan (MEMS SP) for implementing modern MC&A equipment and methodologies at Rosatom facilities has been developed within the framework of the U.S.-Russian MPC&A Program. This plan developed by the Rosatom's Russian MC&A Equipment and Methodologies (MEM) Working Group and is coordinated by that group with support and coordination provided by the MC&A Measurements Project, Office of National Infrastructure and Sustainability, US DOE. Implementation of different tasks of the MEMS Strategic Plan is coordinated by Rosatom and US-DOE in cooperation with different U.S.-Russian MC&A-related working groups and joint site project teams. This cooperation allowsmore » to obtain and analyze information about problems, current needs and successes at Rosatom facilities and facilitates solution of the problems, satisfying the facilities' needs and effective exchange of expertise and lessons learned. The objective of the MEMS Strategic Plan is to enhance effectiveness of activities implementing modern equipment and methodologies in the Russian State MC&A system. These activities are conducted within the joint Russian-US MPC&A program aiming at reduction of possibility for theft or diversion of nuclear materials and enhancement of control of nuclear materials.« less

Leader/Follower Second Sourcing Strategy as Implemented by the Joint Cruise Missile Project Office.

DTIC Science & Technology

1980-09-01

Analysis -------------------- 50 3. Detailed Analysis ----------------------- 53 4. How to Use Leader/Follower -------------- 54 C. OTHER FACTORS...84 2. Detailed Analysis ---------------------- 91 3. How to Use Leader/Follower ------------- 92 C. SUMMARY...arena. One reason often cited for cost growth is the lack of the "... pressure of true price competition as a motivating force to improve productivity and

Control algorithm implementation for a redundant degree of freedom manipulator

NASA Technical Reports Server (NTRS)

Cohan, Steve

1991-01-01

This project's purpose is to develop and implement control algorithms for a kinematically redundant robotic manipulator. The manipulator is being developed concurrently by Odetics Inc., under internal research and development funding. This SBIR contract supports algorithm conception, development, and simulation, as well as software implementation and integration with the manipulator hardware. The Odetics Dexterous Manipulator is a lightweight, high strength, modular manipulator being developed for space and commercial applications. It has seven fully active degrees of freedom, is electrically powered, and is fully operational in 1 G. The manipulator consists of five self-contained modules. These modules join via simple quick-disconnect couplings and self-mating connectors which allow rapid assembly/disassembly for reconfiguration, transport, or servicing. Each joint incorporates a unique drive train design which provides zero backlash operation, is insensitive to wear, and is single fault tolerant to motor or servo amplifier failure. The sensing system is also designed to be single fault tolerant. Although the initial prototype is not space qualified, the design is well-suited to meeting space qualification requirements. The control algorithm design approach is to develop a hierarchical system with well defined access and interfaces at each level. The high level endpoint/configuration control algorithm transforms manipulator endpoint position/orientation commands to joint angle commands, providing task space motion. At the same time, the kinematic redundancy is resolved by controlling the configuration (pose) of the manipulator, using several different optimizing criteria. The center level of the hierarchy servos the joints to their commanded trajectories using both linear feedback and model-based nonlinear control techniques. The lowest control level uses sensed joint torque to close torque servo loops, with the goal of improving the manipulator dynamic behavior. The control algorithms are subjected to a dynamic simulation before implementation.

Making an anechoic choral recording

NASA Astrophysics Data System (ADS)

Freiheit, Ron; Alexander, John; Ferguson, John

2005-09-01

The utilization of auralization as a tool for acoustic analysis continues to grow and develop. An important element for successful auralization listening experiences is the selection of anechoic source material. In researching the current library of anechoically recorded source material, it was discovered that choral material was not readily available. The Wenger Corporation, St. Olaf College, and 3M undertook a joint project to create an anechoic choral recording. The paper describes the challenges of this recording project-from the technological, logistical, and musical standpoints-and the solutions that were successfully implemented.

Health and Environment Linked for Information Exchange (HELIX)-Atlanta: A CDC-NASA Joint Environmental Public Health Tracking Collaborative Project

NASA Technical Reports Server (NTRS)

Al-Hamdan, Mohammad; Luvall, Jeff; Crosson, Bill; Estes, Maury; Limaye, Ashutosh; Quattrochi, Dale; Rickman, Doug

2008-01-01

HELIX-Atlanta was developed to support current and future state and local EPHT programs to implement data linking demonstration projects which could be part of the CDC EPHT Network. HELIX-Atlanta is a pilot linking project in Atlanta for CDC to learn about the challenges the states will encounter. NASA/MSFC and the CDC are partners in linking environmental and health data to enhance public health surveillance. The use of NASA technology creates value added geospatial products from existing environmental data sources to facilitate public health linkages. Proving the feasibility of the approach is the main objective

Full-field inspection of three-dimensional structures using steady-state acoustic wavenumber spectroscopy

NASA Astrophysics Data System (ADS)

Koskelo, Elise Anne C.; Flynn, Eric B.

2017-02-01

Inspection of and around joints, beams, and other three-dimensional structures is integral to practical nondestructive evaluation of large structures. Non-contact, scanning laser ultrasound techniques offer an automated means of physically accessing these regions. However, to realize the benefits of laser-scanning techniques, simultaneous inspection of multiple surfaces at different orientations to the scanner must not significantly degrade the signal level nor diminish the ability to distinguish defects from healthy geometric features. In this study, we evaluated the implementation of acoustic wavenumber spectroscopy for inspecting metal joints and crossbeams from interior angles. With this technique, we used a single-tone, steady-state, ultrasonic excitation to excite the joints via a single transducer attached to one surface. We then measured the full-field velocity responses using a scanning Laser Doppler vibrometer and produced maps of local wavenumber estimates. With the high signal level associated with steady-state excitation, scans could be performed at surface orientations of up to 45 degrees. We applied camera perspective projection transformations to remove the distortion in the scans due to a known projection angle, leading to a significant improvement in the local estimates of wavenumber. Projection leads to asymmetrical distortion in the wavenumber in one direction, making it possible to estimate view angle even when neither it nor the nominal wavenumber is known. Since plate thinning produces a purely symmetric increase in wavenumber, it also possible to independently estimate the degree of hidden corrosion. With a two-surface joint, using the wavenumber estimate maps, we were able to automatically calculate the orthographic projection component of each angled surface in the scan area.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lockwood, Jr., Neil; McLellan, Jason G; Crossley, Brian

The Resident Fish Stock Status above Chief Joseph and Grand Coulee Dams Project, commonly known as the Joint Stock Assessment Project (JSAP) is a management tool using ecosystem principles to manage artificial fish assemblages and native fish in altered environments existing in the Columbia River System above Chief Joseph and Grand Coulee Dams (blocked area). The three-phase approach of this project will enhance the fisheries resources of the blocked area by identifying data gaps, filling data gaps with research, and implementing management recommendations based on research results. The Blocked Area fisheries information housed in a central location will allow managersmore » to view the entire system while making decisions, rather than basing management decisions on isolated portions of the system. The JSAP (NWPPC program measure 10.8B.26) is designed and guided jointly by fisheries managers in the blocked area and the Columbia Basin blocked area management plan (1998). The initial year of the project (1997) identified the need for a central data storage and analysis facility, coordination with the StreamNet project, compilation of blocked area fisheries information, and a report on the ecological condition of the Spokane River System. These needs were addressed in 1998 by acquiring a central location with a data storage and analysis system, coordinating a pilot project with StreamNet, compiling fisheries distribution data throughout the blocked area, identifying data gaps based on compiled information, and researching the ecological condition of the Spokane River. In order to ensure that any additional information collected throughout the life of this project will be easily stored and manipulated by the central storage facility, it was necessary to develop standardized methodologies between the JSAP fisheries managers. The use of common collection and analytical tools is essential to the process of streamlining joint management decisions. In 1999 and 2000 the project began to address some of the identified data gaps, throughout the blocked area, with a variety of newly developed sampling projects, as well as, continuing with ongoing data collection of established projects.« less

Illumina GA IIx& HiSeq 2000 Production Sequenccing and QC Analysis Pipelines at the DOE Joint Genome Institute

DOE Office of Scientific and Technical Information (OSTI.GOV)

Daum, Christopher; Zane, Matthew; Han, James

2011-01-31

The U.S. Department of Energy (DOE) Joint Genome Institute's (JGI) Production Sequencing group is committed to the generation of high-quality genomic DNA sequence to support the mission areas of renewable energy generation, global carbon management, and environmental characterization and clean-up. Within the JGI's Production Sequencing group, a robust Illumina Genome Analyzer and HiSeq pipeline has been established. Optimization of the sesequencer pipelines has been ongoing with the aim of continual process improvement of the laboratory workflow, reducing operational costs and project cycle times to increases ample throughput, and improving the overall quality of the sequence generated. A sequence QC analysismore » pipeline has been implemented to automatically generate read and assembly level quality metrics. The foremost of these optimization projects, along with sequencing and operational strategies, throughput numbers, and sequencing quality results will be presented.« less

2+2 Electronics Technology. Looking Forward to the Future. A Model Secondary/Post-Secondary 2+2 Program To Prepare Students for Employment.

ERIC Educational Resources Information Center

Judson Independent School District, Converse, TX.

This document contains all pertinent information and essential background data necessary to implement the 2+2 electronics program at the high school level. An introduction describes development of the electronics technology 2+2 project that was a joint effort among San Antonio College and Judson, Northside, and North East Independent School…

Joining Undergraduate Liberal Arts Colleges with a Graduate M.A.T. Program To Implement the Holmes and Carnegie Recommendations.

ERIC Educational Resources Information Center

Winter, Stephen S.

This paper describes a combined B.A.-M.A.T. program, a project planned jointly by Kenyon College and Tufts University for the recruitment of outstanding liberal arts students who are interested in teaching careers. The program fulfills the requirements for teacher certification at the middle or secondary level in Massachusetts. The program offered…

Umatilla River Subbasin Fish Habitat Improvement Program, 1996-2003 Summary Report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

St. Hilaire, Danny R.; Montgomery, Michael; Bailey, Timothy D.

This annual report is in fulfillment of contractual obligations with Bonneville Power Administration (BPA), which is the funding source for the Oregon Department of Fish and Wildlife's (ODFW), Umatilla River Subbasin Fish Habitat Improvement Program (Program). The last Annual Program Report was submitted in 1997, and described projects undertaken in 1995. This report describes Program activities carried out in 2003, along with a summary of projects undertaken during the years 1996 through 2002. The Program works cooperatively with private landowners to develop long-term restoration agreements, under which, passive and active Habitat Improvement Projects are conducted. Historically, projects have included livestockmore » exclusion fencing (passive restoration) to protect riparian habitats, along with the installation of instream structures (active restoration) to address erosion and improve fish habitat. In recent years, the focus of active restoration has shifted to bioengineering treatments and, more recently, to channel re-design and re-construction aimed at improving fish habitat, by restoring stable channel function. This report provides a summary table of past projects (1996-2002), along with a text description of more extensive habitat improvement projects, including: (1) Implementation of a four-phased project on the Lobato property (Birch Creek) beginning in 1996 and involving a demonstration bioengineering site and riparian improvements (fencing, planting), (2) Implementation of stable channel design/instream structure placement on the Houser property, East Birch Creek, beginning in 1998, an (3) Implementation of a joint, US Army Corps of Engineers/ODFW (cost share) project beginning in 2001 on the Brogoitti property, East Birch Creek, which involved implementation of stable channel design/construction and riparian improvement treatments.« less

An ecosystem services framework to support both practical conservation and economic development.

PubMed

Tallis, Heather; Kareiva, Peter; Marvier, Michelle; Chang, Amy

2008-07-15

The core idea of the Millennium Ecosystem Assessment is that the human condition is tightly linked to environmental condition. This assertion suggests that conservation and development projects should be able to achieve both ecological and social progress without detracting from their primary objectives. Whereas "win-win" projects that achieve both conservation and economic gains are a commendable goal, they are not easy to attain. An analysis of World Bank projects with objectives of alleviating poverty and protecting biodiversity revealed that only 16% made major progress on both objectives. Here, we provide a framework for anticipating win-win, lose-lose, and win-lose outcomes as a result of how people manage their ecosystem services. This framework emerges from detailed explorations of several case studies in which biodiversity conservation and economic development coincide and cases in which there is joint failure. We emphasize that scientific advances around ecosystem service production functions, tradeoffs among multiple ecosystem services, and the design of appropriate monitoring programs are necessary for the implementation of conservation and development projects that will successfully advance both environmental and social goals. The potentially bright future of jointly advancing ecosystem services, conservation, and human well-being will be jeopardized unless a global monitoring effort is launched that uses the many ongoing projects as a grand experiment.

An ecosystem services framework to support both practical conservation and economic development

PubMed Central

Tallis, Heather; Kareiva, Peter; Marvier, Michelle; Chang, Amy

2008-01-01

The core idea of the Millennium Ecosystem Assessment is that the human condition is tightly linked to environmental condition. This assertion suggests that conservation and development projects should be able to achieve both ecological and social progress without detracting from their primary objectives. Whereas “win–win” projects that achieve both conservation and economic gains are a commendable goal, they are not easy to attain. An analysis of World Bank projects with objectives of alleviating poverty and protecting biodiversity revealed that only 16% made major progress on both objectives. Here, we provide a framework for anticipating win–win, lose–lose, and win–lose outcomes as a result of how people manage their ecosystem services. This framework emerges from detailed explorations of several case studies in which biodiversity conservation and economic development coincide and cases in which there is joint failure. We emphasize that scientific advances around ecosystem service production functions, tradeoffs among multiple ecosystem services, and the design of appropriate monitoring programs are necessary for the implementation of conservation and development projects that will successfully advance both environmental and social goals. The potentially bright future of jointly advancing ecosystem services, conservation, and human well-being will be jeopardized unless a global monitoring effort is launched that uses the many ongoing projects as a grand experiment. PMID:18621702

The effects of neuromuscular training on knee joint motor control during sidecutting in female elite soccer and handball players.

PubMed

Zebis, Mette K; Bencke, Jesper; Andersen, Lars L; Døssing, Simon; Alkjaer, Tine; Magnusson, S Peter; Kjaer, Michael; Aagaard, Per

2008-07-01

The project aimed to implement neuromuscular training during a full soccer and handball league season and to experimentally analyze the neuromuscular adaptation mechanisms elicited by this training during a standardized sidecutting maneuver known to be associated with non-contact anterior cruciate ligament (ACL) injury. The players were tested before and after 1 season without implementation of the prophylactic training and subsequently before and after a full season with the implementation of prophylactic training. A total of 12 female elite soccer players and 8 female elite team handball players aged 26 +/- 3 years at the start of the study. The subjects participated in a specific neuromuscular training program previously shown to reduce non-contact ACL injury. Neuromuscular activity at the knee joint, joint angles at the hip and knee, and ground reaction forces were recorded during a sidecutting maneuver. Neuromuscular activity in the prelanding phase was obtained 10 and 50 ms before foot strike on a force plate and at 10 and 50 ms after foot strike on a force plate. Neuromuscular training markedly increased before activity and landing activity electromyography (EMG) of the semitendinosus (P < 0.05), while quadriceps EMG activity remained unchanged. Neuromuscular training increased EMG activity for the medial hamstring muscles, thereby decreasing the risk of dynamic valgus. This observed neuromuscular adaptation during sidecutting could potentially reduce the risk for non-contact ACL injury.

Go / NGO success ensures Vietnam project.

PubMed

2000-02-01

This article reports the results of a joint evaluation by the Japanese Evaluation Team and the People's Committee of Nghe An on the Japan International Cooperation Agency Vietnam Reproductive Health (RH) Project. The evaluation, which was conducted through a workshop, showed that the Vietnam RH Project in Nghe An Province was successful. With two short-term experts dispatched to Vietnam in November and December 1999, the Project¿s activities were realized. Many activities were undertaken, which included retraining of community health centers, improvement of district health centers¿ monitoring capacity, and prenatal examination. Although the evaluation was carried out after only 2 years of actual activities, the Project¿s planned activities showed a smooth implementation as a result of good collaboration among Japan, the Vietnamese government, and nongovernmental organizations. With the successful outcome of the first phase of the project, both Japan and Vietnam have put up plans for future project activities.

Metrology for decommissioning nuclear facilities: Partial outcomes of joint research project within the European Metrology Research Program.

PubMed

Suran, Jiri; Kovar, Petr; Smoldasova, Jana; Solc, Jaroslav; Van Ammel, Raf; Garcia Miranda, Maria; Russell, Ben; Arnold, Dirk; Zapata-García, Daniel; Boden, Sven; Rogiers, Bart; Sand, Johan; Peräjärvi, Kari; Holm, Philip; Hay, Bruno; Failleau, Guillaume; Plumeri, Stephane; Laurent Beck, Yves; Grisa, Tomas

2018-04-01

Decommissioning of nuclear facilities incurs high costs regarding the accurate characterisation and correct disposal of the decommissioned materials. Therefore, there is a need for the implementation of new and traceable measurement technologies to select the appropriate release or disposal route of radioactive wastes. This paper addresses some of the innovative outcomes of the project "Metrology for Decommissioning Nuclear Facilities" related to mapping of contamination inside nuclear facilities, waste clearance measurement, Raman distributed temperature sensing for long term repository integrity monitoring and validation of radiochemical procedures. Copyright © 2017 Elsevier Ltd. All rights reserved.

A network collaboration implementing technology to improve medication dispensing and administration in critical access hospitals.

PubMed

Wakefield, Douglas S; Ward, Marcia M; Loes, Jean L; O'Brien, John

2010-01-01

We report how seven independent critical access hospitals collaborated with a rural referral hospital to standardize workflow policies and procedures while jointly implementing the same health information technologies (HITs) to enhance medication care processes. The study hospitals implemented the same electronic health record, computerized provider order entry, pharmacy information systems, automated dispensing cabinets (ADC), and barcode medication administration systems. We conducted interviews and examined project documents to explore factors underlying the successful implementation of ADC and barcode medication administration across the network hospitals. These included a shared culture of collaboration; strategic sequencing of HIT component implementation; interface among HIT components; strategic placement of ADCs; disciplined use and sharing of workflow analyses linked with HIT applications; planning for workflow efficiencies; acquisition of adequate supply of HIT-related devices; and establishing metrics to monitor HIT use and outcomes.

The 2014 tanana inventory pilot: A USFS-NASA partnership to leverage advanced remote sensing technologies for forest inventory

Treesearch

Hans-Erik Andersen; Chad Babcock; Robert Pattison; Bruce Cook; Doug Morton; Andrew Finley

2015-01-01

Interior Alaska (approx. 112 million forested acres in size) is the last remaining forested area within the United States where the Forest Inventory and Analysis (FIA) program is not currently implemented. A joint NASA-FIA inventory pilot project was carried out in 2014 to increase familiarity with interior Alaska logistics and evaluate the utility of state-of-the-art...

Joint Experiment on Scalable Parallel Processors (JESPP) Parallel Data Management

DTIC Science & Technology

2006-05-01

management and analysis tool, called Simulation Data Grid ( SDG ). The design principles driving the design of SDG are: 1) minimize network communication...or SDG . In this report, an initial prototype implementation of this system is described. This project follows on earlier research, primarily...distributed logging system had some 2 limitations. These limitations will be described in this report, and how the SDG addresses these limitations. 3.0

JCL Implementation On A Human Spaceflight Program

NASA Technical Reports Server (NTRS)

Kulpa, Vyga; Karpowich, Mike; Abel, Diana; Archiable, Wes; Carson, William

2013-01-01

Joint Confidence Level (JCL) analysis focuses on the integration of traditionally stove-piped programmatic components (schedule, cost and risk) to establish projected resource and schedule requirements at various confidence levels and to identify programmatic cost and schedule risk drivers. SLS Program consists of multiple Prime Contractors managed by independent SLS Elements which are integrated using SE&I and Program Management. SLS further integrates with GSDO and MPCV through ESD integrated working groups.

Evaluation of the walkable neighborhoods for seniors project in Sacramento County.

PubMed

Hooker, Steven P; Cirill, Lisa A; Geraghty, Anne

2009-07-01

The Walkable Neighborhoods for Seniors project was implemented to foster the creation and promotion of safe and accessible neighborhood walking routes for seniors. This article describes a case study of the efforts put forth by a local task force jointly managed by the Sacramento County Department of Health Services and WALK Sacramento. To facilitate environmental and policy changes that would enable and encourage walking by older adults, these local lead agencies implemented several strategies including organizing a community task force with broad professional and civic representation, conducting environmental audits of selected walking routes, creating walking groups, and advocating for environmental and policy change. Evaluation processes yield information on successes, challenges, and lessons learned that could be applied to similar efforts undertaken by community organizations to improve the walkability of neighborhoods for older adults.

From generic pathways to ICT-supported horizontally integrated care: the SmartCare approach and convergence with future Internet assembly.

PubMed

Urošević, Vladimir; Mitić, Marko

2014-01-01

Successful service integration in policy and practice requires both technology innovation and service process innovation being pursued and implemented at the same time. The SmartCare project (partially EC-funded under CIP ICT PSP Program) aims to achieve this through development, piloting and evaluation of ICT-based services, horizontally integrating health and social care in ten pilot regions, including Kraljevo region in Serbia. The project has identified and adopted two generic highest-level common thematic pathways in joint consolidation phase - integrated support for long-term care and integrated support after hospital discharge. A common set of standard functional specifications for an open ICT platform enabling the delivery of integrated care is being defined, around the challenges of data sharing, coordination and communication in these two formalized pathways. Implementation and system integration on technology and architecture level are to be based on open standards, multivendor interoperability, and leveraging on the current evolving open specification technology foundations developed in relevant projects across the European Research Area.

A Report On Eight Early-Stage State And Regional Projects Testing Value-Based Payment

PubMed Central

Conrad, Douglas; Grembowski, David; Gibbons, Claire; Marcus-Smith, Miriam; Hernandez, Susan E.; Chang, Judy; Renz, Anne; Lau, Bernard; Cruz, Erin dela

2014-01-01

To help contain health care spending and improve the quality of care, practitioners and policy makers are trying to move away from fee-for-service toward value-based payment, which links providers’ reimbursement to the value, rather than the volume, of services delivered. With funding from the Robert Wood Johnson Foundation, eight grantees across the country are designing and implementing value-based payment reform projects. For example, in Salem, Oregon, the Physicians Choice Foundation is testing “Program Oriented Payments,” which include incentives for providers who follow a condition-specific program of care designed to meet goals set jointly by patient and provider. In this article we describe the funding rationale and the specific objectives, strategies, progress, and early stages of implementation of the eight projects. We also share some early lessons and identify prerequisites for success, such as ensuring that providers have broad and timely access to data so they can meet patients’ needs in cost-effective ways. PMID:23650332

TRANSVAC research infrastructure - Results and lessons learned from the European network of vaccine research and development.

PubMed

Geels, Mark J; Thøgersen, Regitze L; Guzman, Carlos A; Ho, Mei Mei; Verreck, Frank; Collin, Nicolas; Robertson, James S; McConkey, Samuel J; Kaufmann, Stefan H E; Leroy, Odile

2015-10-05

TRANSVAC was a collaborative infrastructure project aimed at enhancing European translational vaccine research and training. The objective of this four year project (2009-2013), funded under the European Commission's (EC) seventh framework programme (FP7), was to support European collaboration in the vaccine field, principally through the provision of transnational access (TNA) to critical vaccine research and development (R&D) infrastructures, as well as by improving and harmonising the services provided by these infrastructures through joint research activities (JRA). The project successfully provided all available services to advance 29 projects and, through engaging all vaccine stakeholders, successfully laid down the blueprint for the implementation of a permanent research infrastructure for early vaccine R&D in Europe. Copyright © 2015. Published by Elsevier Ltd.

Teacher change in implementing a research-developed representation construction pedagogy

NASA Astrophysics Data System (ADS)

Hubber, Peter; Chittleborough, Gail

2016-05-01

The Representations in Learning Science (RiLS) project developed a representation construction approach to teaching and learning in science, which has successfully demonstrated enhanced student learning through sustained engagement with ideas, and enhancement of teachers' pedagogical knowledge and understandings of how knowledge in science is developed and communicated. The current Constructing Representations in Science Pedagogy (CRISP) project aims at wider scale implementation of the representation construction approach. This paper explores a range of issues that confronted four Year-8 teachers in implementing this research-developed approach, such as: preparedness of the teacher in terms of epistemological positioning and positioning as a learner, significant support for planning and modelling by the university expert, and a team ethos where teachers share ideas and plan jointly. The Year-8 teachers implemented a representation construction approach to the teaching of the topic of astronomy. The Interconnected Model of Teacher Growth (IMTG) (Clarke and Hollingworth, Teach. Educ., 18 (2001) 947) was used to analyse the teachers' experience in planning and delivering the teaching sequence. This model was found to be flexible in identifying the experiences of teachers in different situations and useful in identifying issues for implementation of a research-developed pedagogy.

The RMTC as a result of 10-year fruitful joint cooperation of the USA, EC and Russia under NMC&A programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dickman, Deborah A.; Frigola, P.; Guardini, Sergio

The Ministry for Atomic Energy of the Russian Federation made the decision to establish the Russian Methodological and Training Center (RMTC) not only as the leading center on personnel training in nuclear material control and accounting (NMC&A) field, but also as the center for rendering methodological support to specialists and inspectors in the course of development and implementation of a new Russian NMC&A system and to the state authorities in their regulatory activities. The importance of the project on RMTC establishment and development was the main reason for concentrating significant efforts not only of the United States (U.S.) National Laboratoriesmore » but also of the European Commission's (EC) Joint Research Center (JRC). The coordination of their efforts in the projects implemented under the U.S.-Russia cooperative program and Technical Assistance to the Commonwealth of Independent States (TACIS) program resulted in establishing the RMTC, a unique NMC&A methodological and training center in Russia, that has the state-of-the-art instrumentation and tools and highly qualified personnel. The Center has the possibility to invite not only the State Scientific Center of the Russian Federation - Institute of Physics and Power Engineering named after A. I. Leypunsky (IPPE) specialists but also the specialists from other facilities and agencies to serve as instructors. By now the firm basis for methodological activity has been established in the Center. The RMTC specialists render their knowledge and expertise for many projects on NMC&A upgrading. The RMTC methodological activity is primarily concentrated on development of guidelines on the use of new federal and Rosatom NMC&A regulatory documents. This work is being done with the use of resources and potential of the TACIS program and U.S.-Russia MPC&A program. The paper presents a brief summary of the results achieved in the course of RMTC creation and evolution during the 10-year joint Russian, U.S. and EC efforts.« less

Feasibility study of transportation management strategies in the Poplar Corridor, Memphis, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

Siniard, D.

1990-02-01

This report documents the development and implementation of various transportation management strategies aimed at alleviating traffic congestion problems in the Poplar Corridor, a major transportation corridor located in a rapidly growing suburban area of Memphis, Tennessee. The project provided the opportunity for local governments to work with the private sector in a joint venture to address traffic congestion problems and to promote more efficient use of the area's transportation network. The project was carried out by the staff of Memphis Area Rideshare, a joint city/county agency which provides transit information and free carpool/vanpool computer matching services to area commuters. Publicmore » sector participants in the planning process included transportation and land use planners from the Office of Planning and Development, city traffic engineers, and representatives from the Memphis Area Transit Authority (MATA). Private sector input came from major developers and employers in the Poplar Corridor and from officials of schools located in the area.« less

Final Environmental Assessment Airfield Storm Drainage System Repair Joint Base Andrews-Naval Air Facility Washington, MD

DTIC Science & Technology

2015-06-01

sediment control plan during project implementation would be expected to minimize any adverse effects on resident fish species during construction. In... Effective August 8, 2007, under the authority of the Endangered Species Act of 1973, as amended, the U.S. Fish and Wildlife Service (Service) removed...of storm sewer pipe and 122 manholes of the airfield stormwater drainage network. Summary of Anticipated Environmental Effects Associated with the

Improving Tools and Processes in Mechanical Design Collaboration

NASA Technical Reports Server (NTRS)

Briggs, Clark

2009-01-01

Cooperative product development projects in the aerospace and defense industry are held hostage to high cost and risk due to poor alignment of collaborative design tools and processes. This impasse can be broken if companies will jointly develop implementation approaches and practices in support of high value working arrangements. The current tools can be used to better advantage in many situations and there is reason for optimism that tool vendors will provide significant support.

Joint road safety operations in tunnels and open roads

NASA Astrophysics Data System (ADS)

Adesiyun, Adewole; Avenoso, Antonio; Dionelis, Kallistratos; Cela, Liljana; Nicodème, Christophe; Goger, Thierry; Polidori, Carlo

2017-09-01

The objective of the ECOROADS project is to overcome the barrier established by the formal interpretation of the two Directives 2008/96/EC and 2004/54/EC, which in practice do not allow the same Road Safety Audits/Inspections to be performed inside tunnels. The projects aims at the establishment of a common enhanced approach to road infrastructure and tunnel safety management by using the concepts and criteria of the Directive 2008/96/CE on road infrastructure safety management and the results of related European Commission (EC) funded projects. ECOROADS has already implemented an analysis of national practices regarding Road Safety Inspections (RSI), two Workshops with the stakeholders, and an exchange of best practices between European tunnel experts and road safety professionals, which led to the definition of common agreed safety procedures. In the second phase of the project, different groups of experts and observers applied the above common procedures by inspecting five European road sections featuring both open roads and tunnels in Belgium, Albania, Germany, Serbia and Former Yugoslav Republic of Macedonia. This paper shows the feedback of the 5 joint safety operations and how they are being used for a set of - recommendations and guidelines for the application of the RSA and RSI concepts within the tunnel safety operations.

Status of Activities to Implement a Sustainable System of MC&A Equipment and Methodological Support at Rosatom Facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

J.D. Sanders

Under the U.S.-Russian Material Protection, Control and Accounting (MPC&A) Program, the Material Control and Accounting Measurements (MCAM) Project has supported a joint U.S.-Russian effort to coordinate improvements of the Russian MC&A measurement system. These efforts have resulted in the development of a MC&A Equipment and Methodological Support (MEMS) Strategic Plan (SP), developed by the Russian MEM Working Group. The MEMS SP covers implementation of MC&A measurement equipment, as well as the development, attestation and implementation of measurement methodologies and reference materials at the facility and industry levels. This paper provides an overview of the activities conducted under the MEMS SP,more » as well as a status on current efforts to develop reference materials, implement destructive and nondestructive assay measurement methodologies, and implement sample exchange, scrap and holdup measurement programs across Russian nuclear facilities.« less

Multi-Dimensional High Order Essentially Non-Oscillatory Finite Difference Methods in Generalized Coordinates

NASA Technical Reports Server (NTRS)

Shu, Chi-Wang

1998-01-01

This project is about the development of high order, non-oscillatory type schemes for computational fluid dynamics. Algorithm analysis, implementation, and applications are performed. Collaborations with NASA scientists have been carried out to ensure that the research is relevant to NASA objectives. The combination of ENO finite difference method with spectral method in two space dimension is considered, jointly with Cai [3]. The resulting scheme behaves nicely for the two dimensional test problems with or without shocks. Jointly with Cai and Gottlieb, we have also considered one-sided filters for spectral approximations to discontinuous functions [2]. We proved theoretically the existence of filters to recover spectral accuracy up to the discontinuity. We also constructed such filters for practical calculations.

Getting from here to there: evaluating West Virginia's rural nonemergency medical transportation program.

PubMed

Bellamy, Gail R; Stone, Kendall; Richardson, Sally K; Goldsteen, Raymond L

2003-01-01

With funding from the 21st Century Challenge Fund, the West Virginia Rural Health Access Program created Transportation for Health, a demonstration project for rural nonemergency medical transportation. The project was implemented in 3 sites around the state, building on existing transportation systems--specifically, a multicounty transit authority, a joint senior center/transit system, and a senior services center. An evaluation of the project was undertaken to answer 3 major questions: (1) Did the project reach the population of people who need transportation assistance? (2) Are users of the transportation project satisfied with the service? (3) Is the program sustainable? Preliminary results from survey data indicate that the answers to questions 1 and 2 are affirmative. A break-even analysis of all 3 sites begins to identify programmatic and policy issues that challenge the likelihood of financial sustainability, including salary expenses, unreimbursed mileage, and reliance on Medicaid reimbursement.

Balancing Acts: Adolescents' and Mothers' Friendship Projects

ERIC Educational Resources Information Center

Marshall, Sheila K.; Young, Richard A.; Tilton-Weaver, Lauree C.

2008-01-01

This investigation describes the joint goal-directed series of actions, or joint friendship projects, of 19 mothers and their adolescents. Data were collected through videotaped conversations, video recall interviews, and self-report logs collected over an 8-month period. Qualitative analysis of the data revealed joint projects characterized by…

Institutionalizing Blended Learning into Joint Training: A Case Study and Ten Recommendations

DTIC Science & Technology

2014-12-01

mail.mil pbockelman@mesh.dsci.com ABSTRACT In 2011, the Joint Staff J7 (Joint Training) directorate initiated the Continuum of eLearning project in...Orlando, FL. 14. ABSTRACT In 2011, the Joint Staff J7 (Joint Training) directorate initiated the Continuum of eLearning project in order to integrate...dispersed organizations still poses significant challenges. The Joint Staff J7, Deputy Director for Joint Training initiated the Continuum of eLearning

Mixing, Noise and Thrust Benefits Using Corrugated Designs

NASA Technical Reports Server (NTRS)

White, Samuel G.; Gilinsky, Mikhail M.

1998-01-01

This project was conducted as a support for effective research, training and teaching of Hampton University students in Fluid Mechanics and Acoustics. Basically, this work is organized and implemented by the new Fluid Mechanics and Acoustics Laboratory (FM & AL) which was established at Hampton University in the School of Engineering and Technology (E & T) in 1996. In addition, FM & AL in cooperation with NASA LaRC jointly conducts research with the Central AeroHydrodynamics Institute (TSAGI, Moscow) in Russia under a 2 year Civilian Research and Development Foundation (CRDF). This project is also conducted under control of NASA HQ. For fulfillment of the current project, several researchers were involved as was shown in the proposal to NASA in 1996. This work is the development and support for projects solve problems with the goal of reducing jet noise and increasing nozzle thrust.

BinQuasi: a peak detection method for ChIP-sequencing data with biological replicates.

PubMed

Goren, Emily; Liu, Peng; Wang, Chao; Wang, Chong

2018-04-19

ChIP-seq experiments that are aimed at detecting DNA-protein interactions require biological replication to draw inferential conclusions, however there is no current consensus on how to analyze ChIP-seq data with biological replicates. Very few methodologies exist for the joint analysis of replicated ChIP-seq data, with approaches ranging from combining the results of analyzing replicates individually to joint modeling of all replicates. Combining the results of individual replicates analyzed separately can lead to reduced peak classification performance compared to joint modeling. Currently available methods for joint analysis may fail to control the false discovery rate at the nominal level. We propose BinQuasi, a peak caller for replicated ChIP-seq data, that jointly models biological replicates using a generalized linear model framework and employs a one-sided quasi-likelihood ratio test to detect peaks. When applied to simulated data and real datasets, BinQuasi performs favorably compared to existing methods, including better control of false discovery rate than existing joint modeling approaches. BinQuasi offers a flexible approach to joint modeling of replicated ChIP-seq data which is preferable to combining the results of replicates analyzed individually. Source code is freely available for download at https://cran.r-project.org/package=BinQuasi, implemented in R. pliu@iastate.edu or egoren@iastate.edu. Supplementary material is available at Bioinformatics online.

Technical Description of Urban Microscale Modeling System: Component 1 of CRTI Project 02-0093RD

DTIC Science & Technology

2007-03-01

0093RD which involved (1) development and implementation of a com- putational fluid dynamics model for the simulation of urban flow in an arbitrary...resource will serve as a nation-wide general problem- solving tool for first-responders involved with CBR incidents in the urban environment and...predictions with experimental data obtained from a comprehensive full-scale urban field experiment conducted in Oklahoma City, Oklahoma in July 2003 (Joint

Learning Outcomes: Common Framework--Different Approaches to Evaluation Learning Outcomes in the Nordic Countries. Joint Nordic Project 2007-2008, by the Nordic Quality Assurance Network for Higher Education (NOQA). ENQA Occasional Papers 15

ERIC Educational Resources Information Center

Gallavara, G.; Hreinsson, E.; Kajaste, M.; Lindesjoo, E.; Solvhjelm, C.; Sorskar, A. K.; Zadeh, M. Sedigh

2008-01-01

The adoption of the Bologna process has influenced the development of quality assurance across many countries in Europe. In particular, the implementation of the Framework for Qualifications in the European Higher Education Area has stimulated discussion about the three cycle model, which uses generic descriptors for each cycle based on learning…

Longitudinal joint treatment.

DOT National Transportation Integrated Search

2006-03-01

Maine highways have been showing signs of longitudinal joint failure for a number of years. In an effort : to reduce the amount of joint failures the Maine Department of Transportation (MDOT) is currently : evaluating two projects. One project is mon...

Longitudinal joint treatment : construction report.

DOT National Transportation Integrated Search

2000-05-01

Maine highways have been showing signs of longitudinal joint failure for a number of : years. In an effort to reduce the amount of joint failures the Maine Department of : Transportation (MDOT) is currently evaluating two projects. One project is mon...

[Development and Implementation of a Comprehensive Health Management System (Fit for Work and Life) for Employees of a University Hospital - A Practice Report].

PubMed

Gutenbrunner, C; Egen, C; Kahl, K G; Briest, J; Tegtbur, U; Miede, J; Born, M

2017-07-01

Background: Due to the increase of sick leave, prolonging working life and the prediction of shortage of skilled workers in the future, health management systems are continuously gaining importance. Employees in a University Hospital are exposed to particular stress factors, which are also reflected in a higher than average amount of sick leave. Against this background, the project "Fit for Work and Life" (FWL) was developed and implemented by the Hannover Medical School (MHH). Aims: FWL aims to maintain, improve or recover the work ability of employees by offering both preventive and rehabilitative treatments. A second goal is to significantly reduce the days of sick leave. Methods: The project was jointly developed and implemented by five MHH departments and the DRV Braunschweig-Hannover (DRV BS-H) according to previously defined principles. It was scientifically evaluated by the following outcomes: average days of sick leave, work ability (WAI), quality of life (SF-36, WHOQOL), coping strategies (FERUS) and effort-reward imbalance (ERI). Results and Conclusions: So far, this project is unique in its concept. It has been successfully implemented in the organisational structures of the MHH. 376 employees have registered during the first project year. Up to now, 182 participants have completed their individual programmes. The results show that 60.4% of employees have moderate to poor WAI values. The average of the mental summary scale of the SF-36 was 44.9, indicating a high workload. © Georg Thieme Verlag KG Stuttgart · New York.

Modelling and Simulation of the Knee Joint with a Depth Sensor Camera for Prosthetics and Movement Rehabilitation

NASA Astrophysics Data System (ADS)

Risto, S.; Kallergi, M.

2015-09-01

The purpose of this project was to model and simulate the knee joint. A computer model of the knee joint was first created, which was controlled by Microsoft's Kinect for Windows. Kinect created a depth map of the knee and lower leg motion independent of lighting conditions through an infrared sensor. A combination of open source software such as Blender, Python, Kinect SDK and NI_Mate were implemented for the creation and control of the simulated knee based on movements of a live physical model. A physical size model of the knee and lower leg was also created, the movement of which was controlled remotely by the computer model and Kinect. The real time communication of the model and the robotic knee was achieved through programming in Python and Arduino language. The result of this study showed that Kinect in the modelling of human kinematics and can play a significant role in the development of prosthetics and other assistive technologies.

Longitudinal joint treatment : first interim report.

DOT National Transportation Integrated Search

2000-11-01

Maine highways have been showing signs of longitudinal joint failure for a number of : years. In an effort to reduce the amount of joint failures the Maine Department of : Transportation (MDOT) is currently evaluating two projects. One project is mon...

Longitudinal joint treatment : second interim report.

DOT National Transportation Integrated Search

2001-09-01

Maine highways have been showing signs of longitudinal joint failure for a : number of years. In an effort to reduce the amount of joint failures the Maine : Department of Transportation (MDOT) is currently evaluating two projects. One : project is m...

32 CFR 644.4 - Reservoir projects.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 4 2014-07-01 2013-07-01 true Reservoir projects. 644.4 Section 644.4 National... HANDBOOK Project Planning Civil Works § 644.4 Reservoir projects. (a) Joint land acquisition policy for reservoir projects. The joint policies of the Department of the Interior and the Department of the Army...

32 CFR 644.4 - Reservoir projects.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 4 2013-07-01 2013-07-01 false Reservoir projects. 644.4 Section 644.4 National... HANDBOOK Project Planning Civil Works § 644.4 Reservoir projects. (a) Joint land acquisition policy for reservoir projects. The joint policies of the Department of the Interior and the Department of the Army...

32 CFR 644.4 - Reservoir projects.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 4 2012-07-01 2011-07-01 true Reservoir projects. 644.4 Section 644.4 National... HANDBOOK Project Planning Civil Works § 644.4 Reservoir projects. (a) Joint land acquisition policy for reservoir projects. The joint policies of the Department of the Interior and the Department of the Army...

Present status and future prospects of the JT-60SA project

NASA Astrophysics Data System (ADS)

Ishida, S.; Barabaschi, P.; Kamada, Y.

2014-10-01

The JT-60SA project has been implemented jointly by Europe and Japan since June 2007. After the disassembly of JT-60 from the torus hall had been completed in October 2012, the project achieved the major milestone of starting the tokamak's assembly at the JAEA Naka site in January 2013 following the completion of the cryostat base in Europe and its transport to Japan. Procurement and assembly activities for components such as the superconducting magnet, cryogenic system, power supply, vacuum vessel, divertor and cryostat are progressing on track towards the start of operation in March 2019. In preparation for exploitation, the JT-60SA Research Plan was issued in December 2011, and the research integration activities are addressing JT-60SA data management, validation and analysis tools. This paper overviews the latest evolution of the project in terms of construction and exploitation for JT-60SA.

Results of student-peer collaboration in the development of the Geoscience Student Data Network

NASA Astrophysics Data System (ADS)

Block, K. A.; Snyder, W. S.; Williams, N.; Rudolph, E.

2012-12-01

The Geoscience Student Data Network (GSDNet) is an NSF-CCLI project to develop a software application that facilitates student collaboration and data analysis. Cyberinfrastructure development is accompanied by a three-course curriculum that includes a field component implemented jointly at City College of New York (CCNY) and Boise State University (BSU). We report on the challenges of utilizing existing social networking technology for student collaboration and the hurdles of real-time information exchange on heavily taxed networks and facilities. The field component and research project currently underway is engaging eight students from CCNY and their BSU peer-mentors. Students are characterizing a geothermal prospect in Idaho by combining data collected in the field, laboratory studies and cyberinfrastructure outlets using the GSDNet prototype. We will summarize results of student projects from data collection, metadata documentation, online collaboration, and project dissemination.

Apollo-Soyuz test project docking system

NASA Technical Reports Server (NTRS)

Swan, W. L., Jr.

1976-01-01

The United States and Soviet Union in July 1975 successfully completed a joint space mission utilizing each country's spacecraft and the compatible docking system designed and fabricated by each country. The compatible docking system is described, along with the extensive research, development, and testing leading up to the successful mission. It also describes the formulation and implementation of methods for breaking the language barrier, bridging the extensive distances for communication and travel, and adjusting to each country's different culture during the three-year development program.

The Spanish National Reference Database for Ionizing Radiations (BANDRRI)

PubMed

Los Arcos JM; Bailador; Gonzalez; Gonzalez; Gorostiza; Ortiz; Sanchez; Shaw; Williart

2000-03-01

The Spanish National Reference Database for Ionizing Radiations (BANDRRI) is being implemented by a reasearch team in the frame of a joint project between CIEMAT (Unidad de Metrologia de Radiaciones Ionizantes and Direccion de Informatica) and the Universidad Nacional de Educacion a Distancia (UNED, Departamento de Mecanica y Departamento de Fisica de Materiales). This paper presents the main objectives of BANDRRI, its dynamic and relational data base structure, interactive Web accessibility and its main radionuclide-related contents at this moment.

TRMM (Tropical Rainfall Measuring Mission): A satellite mission to measure tropical rainfall

NASA Technical Reports Server (NTRS)

Simpson, Joanne (Editor)

1988-01-01

The Tropical Rainfall Measuring Mission (TRMM) is presented. TRMM is a satellite program being studied jointly by the United States and Japan which would carry out the systematic study of tropical rainfall required for major strides in weather and climate research. The scientific justification for TRMM is discussed. The implementation process for the scientific community, NASA management, and the other decision-makers and advisory personnel who are expected to evaluate the priority of the project is outlined.

California Schools Develop Joint Faculty Journalism Project.

ERIC Educational Resources Information Center

Patt, Bruce E.

1995-01-01

Describes the Joint Faculty Journalism project, undertaken in 1994-95 by California's community colleges and universities to develop methods for increasing alliances with journalism practitioners. Discusses project objectives and resulting recommendations related to increasing student recruitment and success. Reviews positive project outcomes and…

[Building bridges between research and policy to extend social protection in health in Latin America and the Caribbean: a strategy for cooperation].

PubMed

Bazzani, Roberto; Levcovitz, Eduardo; Urrutia, Soledad; Zarowsky, Christina

2006-01-01

The Pan American Health Organization (PAHO) and International Development Research Centre (IDRC) have promoted a joint initiative to design, implement, and evaluate innovative strategies for the Extension of Social Protection in Health (SPH) in Latin America and the Caribbean (LAC), involving active partnership between researchers and research users. This initiative was based on a previous review of research on health sector reforms and the recommendations of the workshop on "Health Sector Reforms in the Americas: Strengthening the Links between Research and Policy" (Montreal, Canada, 2001). In its first phase, the initiative supported the development of proposals aiming to extend SPH, elaborated jointly by researchers and decision-makers. In the second phase, the implementation of five of these proposals was supported in order to promote the development of new SPH strategies and new stakeholder interaction models. In this edition of the journal, the process of linking researchers and decision-makers will be analyzed in the context of the five projects supported by this initiative.

Longitudinal joint treatment, interim report - third year, March 2004.

DOT National Transportation Integrated Search

2004-03-01

Maine highways have been showing signs of longitudinal joint failure for a number of years. In an effort : to reduce the amount of joint failures the Maine Department of Transportation (MDOT) is currently : evaluating two projects. One project is mon...

Longitudinal joint treatment, interim report - fourth year, March 2005.

DOT National Transportation Integrated Search

2005-03-01

Maine highways have been showing signs of longitudinal joint failure for a number of years. In an effort : to reduce the amount of joint failures the Maine Department of Transportation (MDOT) is currently : evaluating two projects. One project is mon...

Vulnerability assessment in a participatory approach to design and implement community based adaptation to drought in the Peruvian Andes

NASA Astrophysics Data System (ADS)

Lasage, Ralph; Muis, Sanne; Sardella, Carolina; van Drunen, Michiel; Verburg, Peter; Aerts, Jeroen

2015-04-01

The livelihoods of people in the Andes are expected to be affected by climate change due to their dependence on glacier meltwater during the growing season. The observed decrease in glacier volume over the last few decades is likely to accelerate during the current century, which will affect water availability in the region. This paper presents the implementation of an approach for the participatory development of community-based adaptation measures to cope with the projected impacts of climate change, which was implemented jointly by the local community and by a team consisting of an NGO, Peruvian ministry of environment, research organisations and a private sector organisation. It bases participatory design on physical measurements, modelling and a vulnerability analysis. Vulnerability to drought is made operational for households in a catchment of the Ocoña river basin in Peru. On the basis of a household survey we explore how a vulnerability index (impacts divided by the households' perceived adaptive capacity) can be used to assess the distribution of vulnerability over households in a sub catchment. The socio-economic factors water entitlement, area of irrigated land, income and education are all significantly correlate with this vulnerability to drought. The index proved to be appropriate for communicating about vulnerability to climate change and its determining factors with different stakeholders. The water system research showed that the main source of spring water is local rainwater, and that water use efficiency in farming is low. The adaptation measures that were jointly selected by the communities and the project team aimed to increase water availability close to farmland, and increase water use efficiency, and these will help to reduce the communities vulnerability to drought.

Probabilistic accident consequence uncertainty analysis: Dispersion and deposition uncertainty assessment, appendices A and B

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harper, F.T.; Young, M.L.; Miller, L.A.

The development of two new probabilistic accident consequence codes, MACCS and COSYMA, completed in 1990, estimate the risks presented by nuclear installations based on postulated frequencies and magnitudes of potential accidents. In 1991, the US Nuclear Regulatory Commission (NRC) and the Commission of the European Communities (CEC) began a joint uncertainty analysis of the two codes. The objective was to develop credible and traceable uncertainty distributions for the input variables of the codes. Expert elicitation, developed independently, was identified as the best technology available for developing a library of uncertainty distributions for the selected consequence parameters. The study was formulatedmore » jointly and was limited to the current code models and to physical quantities that could be measured in experiments. To validate the distributions generated for the wet deposition input variables, samples were taken from these distributions and propagated through the wet deposition code model along with the Gaussian plume model (GPM) implemented in the MACCS and COSYMA codes. Resulting distributions closely replicated the aggregated elicited wet deposition distributions. Project teams from the NRC and CEC cooperated successfully to develop and implement a unified process for the elaboration of uncertainty distributions on consequence code input parameters. Formal expert judgment elicitation proved valuable for synthesizing the best available information. Distributions on measurable atmospheric dispersion and deposition parameters were successfully elicited from experts involved in the many phenomenological areas of consequence analysis. This volume is the second of a three-volume document describing the project and contains two appendices describing the rationales for the dispersion and deposition data along with short biographies of the 16 experts who participated in the project.« less

Perverse effects of carbon markets on HFC-23 and SF6 abatement projects in Russia

NASA Astrophysics Data System (ADS)

Schneider, Lambert; Kollmuss, Anja

2015-12-01

Carbon markets are considered a key policy tool to achieve cost-effective climate mitigation. Project-based carbon market mechanisms allow private sector entities to earn tradable emissions reduction credits from mitigation projects. The environmental integrity of project-based mechanisms has been subject to controversial debate and extensive research, in particular for projects abating industrial waste gases with a high global warming potential (GWP). For such projects, revenues from credits can significantly exceed abatement costs, creating perverse incentives to increase production or generation of waste gases as a means to increase credit revenues from waste gas abatement. Here we show that all projects abating HFC-23 and SF6 under the Kyoto Protocol’s Joint Implementation mechanism in Russia increased waste gas generation to unprecedented levels once they could generate credits from producing more waste gas. Our results suggest that perverse incentives can substantially undermine the environmental integrity of project-based mechanisms and that adequate regulatory oversight is crucial. Our findings are critical for mechanisms in both national jurisdictions and under international agreements.

75 FR 81454 - Privacy Act of 1974; Implementation

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-28

... JOINT BOARD FOR ENROLLMENT OF ACTUARIES 20 CFR Part 903 Privacy Act of 1974; Implementation AGENCY... requirements of the Privacy Act of 1974, as amended, the Joint Board for the Enrollment of Actuaries (Joint... Privacy Act, from certain of the Privacy Act's provisions, to revise language that incorrectly implies...

Collaborating with community-based services to promote evidence-based practice: Process description of a national initiative to improve services for youth with mental health and substance use problems.

PubMed

Henderson, Joanna L; Chaim, Gloria; Brownlie, E B

2017-08-01

Many youth with significant mental health (MH) and/or substance use (SU) difficulties do not receive specialized services. Collaboration between service providers, researchers, and other stakeholders is essential to improve youth service system capacity to provide evidence-based services to meet the complex array of needs of youth. Facilitators and barriers of implementing evidence-based practice have been identified, but few studies provide examples of the processes of collaboration and implementation for youth MH services. This study explicates the design features and implementation processes of a project to improve screening activities in youth services. These processes supported the building of 16 collaborative networks of service providers from diverse youth-serving sectors (e.g., MH, youth justice, child welfare) in urban, rural, suburban, and remote Canadian communities. These cross-sectoral networks implemented an evidence-based practice (screening youth aged 12-24 years for MH and SU problems using the Global Assessment of Individual Needs-Short Screener [GAIN-SS]) across their services. Materials and resources were provided by a centralized research team. Core project components were standardized and adherence to these components was monitored. Over 800 service providers participated in cross-sectoral networks, capacity-building events, joint data analysis, or interpretation and recommendation sessions. Across the 89 participating agencies, service providers for 84% of participating youth implemented the evidence-based practice accurately in accordance with project protocols, with 98% of positive screens reviewed and addressed according to organizational protocols. Service provider feedback is reported. Facilitators, barriers, and implications of promoting implementation of evidence-based practices across sites and sectors are discussed. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

77 FR 30900 - Approval and Promulgation of Implementation Plans; New Mexico; Albuquerque/Bernalillo County...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-24

... in implementing the New Mexico Air Quality Control Act, the joint Air Quality Control Board (AQCB... Department in implementing the New Mexico Air Quality Control Act, the joint Air Quality Control Board (AQCB... Promulgation of Implementation Plans; New Mexico; Albuquerque/Bernalillo County; Fees for Permits and...

Continuously monitoring the parity of superconducting qubits in a 2D cQED architecture

NASA Astrophysics Data System (ADS)

Blok, Machiel; Flurin, Emmanuel; Livingston, William; Colless, James; Dove, Allison; Siddiqi, Irfan

Continuous measurements of joint qubit properties such as their parity can reveal insight into the collapse dynamics of entangled states and are a prerequisite for implementing continuous quantum error correction. Here it is crucial that the measurement collects no information other than the parity to avoid measurement induced dephasing. In a cQED architecture, a full-parity measurement can be implemented by strongly coupling two transmon qubits to a single high-Q planar resonator (χ >> κ). We will discuss the experimental implementation of this on-chip technique and the prospects to extend it to more qubits. This will allow us to monitor, in real-time, the projection into multi-partite entangled states and continuously detect errors on a logical qubit encoded in an entangled subspace. This work was supported by Army Research Office.

Durability study of the US-23 aggregate test road and recent JPCP projects with premature joint deterioration.

DOT National Transportation Integrated Search

2010-12-01

Materials related distress (MRD) characterized by starburst type corner spalling at the longitudinal centerline joint, and occasional transverse joint spalling have developed at a rapid rate in a number of JPCP projects constructed since 1999. ...

Coasts under multiple stresses: lessons learned from ARSTISTICC's eight coastal study sites.

NASA Astrophysics Data System (ADS)

Vanderlinden, J. P.; Berman, M.; Chouinard, O.; Kane, A.; Nikulkina, I.; Ragueneau, O.; Thomson, T. K.; Baztan, J.; Cordier, M.; Curry, T.; Da Cunha, C.; Gaye, N.; Huctin, J. M.; Kennedy, G.; Kofinas, G.; Maze, C.; Quensiere, J.; Raimonet, M.; Remvikos, Y.; Seck, A.; Surette, C.; Zhu, Z.

2016-12-01

The "Adaptation Research a Transdisciplinary community and policy centered approach" (ARTisticc) project has as goal to apply innovative standardized transdisciplinary art and science integrative approaches to foster robust, socially, culturally and scientifically, community centered adaptation to climate change. Fieldwork has been implemented in coastal communities in France (Brest, Britany), Senegal (Mbour, Petite Côte), India (Kochi, Kerala and Kanyakumari, Tamil nadu), Russia (Tiksi, Yakutia), Greenland (Uummannaq), the United States (Wainwright, Alaska), and Canada (Cocagne and Grande Digue, New Bunswick). It involved transdisciplinary teams of scientists, community members and artists. Preliminary results of the project will be presented. These pertain to two dimensions: a substantive dimension, i.e. better understanding of the role of knowledge and knowledge systems in adaptation, and a procedural dimension, i.e. better understanding of the implementation of transdisciplinary approaches to adaptation science. On the substantive front we will focus on presenting how, within such a high diversity of contexts, regularities were identifiable and why these are relevant to policy making. We are focusing this analysis on: scale, agents involved in the adaptation dynamics, dominant paradigm that are being mobilized and the drivers and enablers of local actions - all in relationship with knowledge use. These specifics are engaged in an interplay that calls for attention before any local level actions can be implemented. On the procedural front we will highlight the challenges, discovered along the way, of dovetailing science and art as a way to better apprehend and share the knowledge base on adaptation to climate change. What is the role of science, as perceived by local communities? What is the role of art? Can the joint implementation of both facilitate or hinder an adaptation process? The answer to these questions is again conditional to the nature of the teams that are involved and to local narratives and historical dimension that may allow for the joint practice of art and science.

From vision to action: roadmapping as a strategic method and tool to implement climate change adaptation - the example of the roadmap 'water sensitive urban design 2020'.

PubMed

Hasse, J U; Weingaertner, D E

2016-01-01

As the central product of the BMBF-KLIMZUG-funded Joint Network and Research Project (JNRP) 'dynaklim - Dynamic adaptation of regional planning and development processes to the effects of climate change in the Emscher-Lippe region (North Rhine Westphalia, Germany)', the Roadmap 2020 'Regional Climate Adaptation' has been developed by the various regional stakeholders and institutions containing specific regional scenarios, strategies and adaptation measures applicable throughout the region. This paper presents the method, elements and main results of this regional roadmap process by using the example of the thematic sub-roadmap 'Water Sensitive Urban Design 2020'. With a focus on the process support tool 'KlimaFLEX', one of the main adaptation measures of the WSUD 2020 roadmap, typical challenges for integrated climate change adaptation like scattered knowledge, knowledge gaps and divided responsibilities but also potential solutions and promising chances for urban development and urban water management are discussed. With the roadmap and the related tool, the relevant stakeholders of the Emscher-Lippe region have jointly developed important prerequisites to integrate their knowledge, to clarify vulnerabilities, adaptation goals, responsibilities and interests, and to foresightedly coordinate measures, resources, priorities and schedules for an efficient joint urban planning, well-grounded decision-making in times of continued uncertainties and step-by-step implementation of adaptation measures from now on.

Joint remote control of an arbitrary single-qubit state by using a multiparticle entangled state as the quantum channel

NASA Astrophysics Data System (ADS)

Lv, Shu-Xin; Zhao, Zheng-Wei; Zhou, Ping

2018-01-01

We present a scheme for joint remote implementation of an arbitrary single-qubit operation following some ideas in one-way quantum computation. All the senders share the information of implemented quantum operation and perform corresponding single-qubit measurements according to their information of implemented operation. An arbitrary single-qubit operation can be implemented upon the remote receiver's quantum system if the receiver cooperates with all the senders. Moreover, we study the protocol of multiparty joint remote implementation of an arbitrary single-qubit operation with many senders by using a multiparticle entangled state as the quantum channel.

Crafting continuity and change in Saudi society: Joint parent-youth transition-to-adulthood projects.

PubMed

Khalifa, Hind; Alnuaim, Aziza A; Young, Richard A; Marshall, Sheila K; Popadiuk, Natalee

2018-02-01

Little is known about the transition to adulthood in traditional, developing countries such as Saudi Arabia. Previous research in other countries has revealed the importance of considering parents' support during the transition to adulthood. Thus, the purpose of this research was to examine how two generations negotiated the transition to adulthood. We asked the research question, What are the joint projects in which parents and youth plan and act on their plans for the youth's future? We used the action project method, an established qualitative approach, to answer these questions by observing the joint conversations of 14 parent and youth dyads. Our results provided evidence of an overarching higher level goal, or intentional framework, of crafting generational change and continuity within which participants' joint projects were embedded. Joint projects were organized into three groups: (a) negotiating educational and career futures, (b) promoting gender roles and marriage, and (c) shaping independence. Copyright © 2017 The Foundation for Professionals in Services for Adolescents. All rights reserved.

Model-based estimation with boundary side information or boundary regularization [cardiac emission CT].

PubMed

Chiao, P C; Rogers, W L; Fessler, J A; Clinthorne, N H; Hero, A O

1994-01-01

The authors have previously developed a model-based strategy for joint estimation of myocardial perfusion and boundaries using ECT (emission computed tomography). They have also reported difficulties with boundary estimation in low contrast and low count rate situations. Here they propose using boundary side information (obtainable from high resolution MRI and CT images) or boundary regularization to improve both perfusion and boundary estimation in these situations. To fuse boundary side information into the emission measurements, the authors formulate a joint log-likelihood function to include auxiliary boundary measurements as well as ECT projection measurements. In addition, they introduce registration parameters to align auxiliary boundary measurements with ECT measurements and jointly estimate these parameters with other parameters of interest from the composite measurements. In simulated PET O-15 water myocardial perfusion studies using a simplified model, the authors show that the joint estimation improves perfusion estimation performance and gives boundary alignment accuracy of <0.5 mm even at 0.2 million counts. They implement boundary regularization through formulating a penalized log-likelihood function. They also demonstrate in simulations that simultaneous regularization of the epicardial boundary and myocardial thickness gives comparable perfusion estimation accuracy with the use of boundary side information.

Radiographic evaluation of perching-joint angles in cockatiels (Nymphicus hollandicus), Hispaniolan Amazon parrots (Amazona ventralis), and barred owls (Strix varia).

PubMed

Bonin, Glen; Lauer, Susanne K; Guzman, David Sanchez-Migallon; Nevarez, Javier; Tully, Thomas N; Hosgood, Giselle; Gaschen, Lorrie

2009-06-01

Information on perching-joint angles in birds is limited. Joint immobilization in a physiologic perching angle has the potential to result more often in complete restoration of limb function. We evaluated perching-joint angles in 10 healthy cockatiels (Nymphicus hollandicus), 10 Hispaniolan Amazons (Amazona ventralis), and 9 barred owls (Strix varia) and determined intra- and interobserver variability for goniometric measurements in 2 different radiographic projections. Intra- and interobserver variation was less than 7% for all stifle and intertarsal joint measurements but frequently exceeded 10% for the hip-joint measurements. Hip, stifle, and intertarsal perching angles differed significantly among cockatiels, Hispaniolan Amazon parrots, and barred owls. The accuracy of measurements performed on straight lateral radiographic projections with superimposed limbs was not consistently superior to measurements on oblique projections with a slightly rotated pelvis. Stifle and intertarsal joint angles can be measured on radiographs by different observers with acceptable variability, but intra- and interobserver variability for hip-joint-angle measurements is higher.

European network for Health Technology Assessment Joint Action (EUnetHTA JA): a process evaluation performed by questionnaires and documentary analysis.

PubMed

Woodford Guegan, Eleanor; Cook, Andrew

2014-06-01

The European network for Health Technology Assessment Joint Action (EUnetHTA JA) project's overarching objective was to 'establish an effective and sustainable HTA [Health technology assessment] collaboration in Europe that brings added value at the regional, national and European level'. Specific objectives were to develop a strategy and business model for sustainable European collaboration on HTA, develop HTA tools and methods and promote good practice in HTA methods and processes. We describe activities performed on behalf of the National Institute for Health Research HTA programme; evaluating the project processes and developing a data set for a registry of planned clinical studies of relevance to public funders. Annual self-completion online questionnaires were sent to project participants and external stakeholders to identify their views about the project processes. Documentary review was undertaken at the project end on the final technical reports from the work packages to examine whether or not their deliverables had been achieved. The project's impact was assessed by whether or not the deliverables were produced, the objectives met and additional 'added value' generated. The project's effectiveness was evaluated by its processes, communication, administration, workings of individual work packages and involvement of external stakeholders. A two-stage Delphi exercise was undertaken to identify the data elements that should be included in a registry of planned clinical studies of relevance to public funders. The data set was validated by an efficacy testing exercise. High response rates were achieved for the questionnaires sent to project participants and this was attributed to the evidence-based strategy implemented. Response rates to questionnaires sent to external stakeholders were disappointingly lower. Most of the high-level objectives were achieved, although applying the developed tools in practice will be implemented in the European network for Health Technology Assessment Joint Action 2 (EUnetHTA JA2). Most work packages produced their planned deliverables. Networking emerged as one of the main benefits of the project and face-to-face meetings were important. However, the overarching objective did not appear to have been met because there will be a follow-up EUnetHTA JA2 project (reliant on project funding) before the establishment of any permanent network. Twelve organisations from three continents participated in the Delphi exercise to develop the data set. It was demonstrated that a registry for matching pragmatic clinical studies under consideration by funders could be built on a very small data set. This would include 10 unique items, of which five are required to describe a study and the rest are metadata. In the test sample the data set with an appropriate matching rule was able to deliver a sensitivity of between 50% and 100% and a specificity of between 43% and 86% for matching different elements. A number of recommendations have been made for the next EUnetHTA JA2 project and its evaluation. This included that the evaluation of the EUnetHTA JA2 project should extend beyond the end of the project to allow assessment of its impact; that the quality, usability and cost-effectiveness of tools in 'real-world HTA practice' should be assessed and tangible benefits of international networking should be evaluated. It is worth proceeding to develop a database registry aimed at identifying trials in development based on the data set developed. The study was funded by the National Institute for Health Research Health Technology Assessment programme (50%) and the European Union Commission (50%).

European network for Health Technology Assessment Joint Action (EUnetHTA JA): a process evaluation performed by questionnaires and documentary analysis.

PubMed Central

Woodford Guegan, Eleanor; Cook, Andrew

2014-01-01

BACKGROUND The European network for Health Technology Assessment Joint Action (EUnetHTA JA) project's overarching objective was to 'establish an effective and sustainable HTA [Health technology assessment] collaboration in Europe that brings added value at the regional, national and European level'. Specific objectives were to develop a strategy and business model for sustainable European collaboration on HTA, develop HTA tools and methods and promote good practice in HTA methods and processes. We describe activities performed on behalf of the National Institute for Health Research HTA programme; evaluating the project processes and developing a data set for a registry of planned clinical studies of relevance to public funders. METHODS Annual self-completion online questionnaires were sent to project participants and external stakeholders to identify their views about the project processes. Documentary review was undertaken at the project end on the final technical reports from the work packages to examine whether or not their deliverables had been achieved. The project's impact was assessed by whether or not the deliverables were produced, the objectives met and additional 'added value' generated. The project's effectiveness was evaluated by its processes, communication, administration, workings of individual work packages and involvement of external stakeholders. A two-stage Delphi exercise was undertaken to identify the data elements that should be included in a registry of planned clinical studies of relevance to public funders. The data set was validated by an efficacy testing exercise. RESULTS AND DISCUSSION High response rates were achieved for the questionnaires sent to project participants and this was attributed to the evidence-based strategy implemented. Response rates to questionnaires sent to external stakeholders were disappointingly lower. Most of the high-level objectives were achieved, although applying the developed tools in practice will be implemented in the European network for Health Technology Assessment Joint Action 2 (EUnetHTA JA2). Most work packages produced their planned deliverables. Networking emerged as one of the main benefits of the project and face-to-face meetings were important. However, the overarching objective did not appear to have been met because there will be a follow-up EUnetHTA JA2 project (reliant on project funding) before the establishment of any permanent network. Twelve organisations from three continents participated in the Delphi exercise to develop the data set. It was demonstrated that a registry for matching pragmatic clinical studies under consideration by funders could be built on a very small data set. This would include 10 unique items, of which five are required to describe a study and the rest are metadata. In the test sample the data set with an appropriate matching rule was able to deliver a sensitivity of between 50% and 100% and a specificity of between 43% and 86% for matching different elements. CONCLUSIONS A number of recommendations have been made for the next EUnetHTA JA2 project and its evaluation. This included that the evaluation of the EUnetHTA JA2 project should extend beyond the end of the project to allow assessment of its impact; that the quality, usability and cost-effectiveness of tools in 'real-world HTA practice' should be assessed and tangible benefits of international networking should be evaluated. It is worth proceeding to develop a database registry aimed at identifying trials in development based on the data set developed. FUNDING The study was funded by the National Institute for Health Research Health Technology Assessment programme (50%) and the European Union Commission (50%). PMID:24913263

Quick-connect threaded attachment joint

NASA Technical Reports Server (NTRS)

Lucy, M. H.; Messick, W. R.; Vasquez, P.

1979-01-01

Joint is self-aligning and tightens with only sixty-five degrees of rotation for quick connects and disconnects. Made of injection-molded plastics or cast or machined aluminum, joint can carry wires, tubes, liquids, or gases. When two parts of joint are brought together, their shapes align them. Small projections on male section and slots on female section further aid alignment; slight rotation of male form engages projections in slots. At this point, threads engage and male section is rotated until joint is fully engaged.

25 CFR 217.7 - Implementation of decision.

Code of Federal Regulations, 2010 CFR

2010-04-01

... expendient to implement the decisions of the joint managers, insofar as such issuance is authorized by law, and he shall execute and/or approve such documents for and on behalf of the joint managers, or either... to execute an instrument on behalf of one or both of the joint managers and to approve the same...

From micro to macro: assessing implementation of integrated care in Australia.

PubMed

Angus, Lisa; Valentijn, Pim P

2018-03-01

Many countries and health systems are pursuing integrated care as a means of achieving better outcomes. However, no standard approaches exist for comparing integration approaches across models or settings, and for evaluating whether the key components of integrated care are present in different initiatives. This study sheds light on how integrated care is being implemented in Australia, using a new tool to characterise and compare integration strategies at micro, meso and macro levels. In total, 114 staff from a purposive sample of 38 integrated care projects completed a survey based on the Rainbow Model of Integrated Care. Ten key informants gave follow-up interviews. Participating projects reported using multiple strategies to implement integrated care, but descriptions of implementation were often inconsistent. Micro-level strategies, including clinical-professional service coordination and person-centred care, were most commonly reported. A common vision was often described as an essential foundation for joint work. However, performance feedback appeared under-utilised, as did strategies requiring macro-level action such as data linkages or payment reform. The results suggest that current integrated care efforts are unevenly weighted towards micro-level strategies. Increased attention to macro-level strategies may be warranted in order to accelerate progress and sustain integrated care in Australia.

Conductor and joint test results of JT-60SA CS and EF coils using the NIFS test facility

NASA Astrophysics Data System (ADS)

Obana, Tetsuhiro; Takahata, Kazuya; Hamaguchi, Shinji; Kizu, Kaname; Murakami, Haruyuki; Chikaraishi, Hirotaka; Noguchi, Hiroki; Kobuchi, Takashi; Moriuchi, Sadatomo; Imagawa, Shinsaku; Mito, Toshiyuki; Tsuchiya, Katsuhiko; Natsume, Kyohei; Yoshida, Kiyoshi; Nomoto, Kazuhiro; Kim, Tae-hyun

2016-01-01

In 2007, JAEA and NIFS launched the test project to evaluate the performance of cable-in-conduit (CIC) conductors and conductor joints for the JT-60SA CS and EF coils. In this project, conductor tests for four types of coil conductor and joint tests for seven types of conductor joint have been conducted for the past eight years using the NIFS test facility. As a result, the test project indicated that the CIC conductors and conductor joints fulfill the design requirement for the CS and EF coils. In addition, the NIFS test facility is expected to be utilized as the test facility for the development of a conductor and conductor joint for the purpose of the DEMO nuclear fusion power plant, provided that the required magnetic field strength is within 9 T.

[Master trainer concept "structured specialist further education" : A joint project of the German Professional Associations of Internal Medicine, Surgeons and Orthopedic/Trauma Surgeons].

PubMed

Siebolds, M; Ansorg, J; Dittmar, R; Hennes, N; Radau, T; Ruff, S; Denkinger, M D

2017-10-01

The quality requirements in the practice of postgradual medical further education below the normal level of the further education regulations is a barely developed scientific field in Germany. A systematic use of internationally accepted scientific evidence barely exists. This research and development project was initiated in 2001 in order to be able to implement a practical but evidence-based model compatible with the existing structure of postgradual medical education. This project has been supported since 2013 by the Professional Associations of Internal Medicine (BDI), Surgeons (BDC) and Orthopedic and Trauma surgeons (BVOU). The development phase of this complex intervention was based on three stages involving stakeholder interviews from relevant groups, the identification of a theoretical model for the construction and systematic literature reviews to identify the relevant evidence. The basic model for structured specialist further education developed included the creation and implementation of a simple core curriculum for every department, a tool for systematic feedback within the framework of the annual further education interviews and a simple clinical assessment to evaluate the actual clinical performance of physicians in further education. A pilot test of this model was carried out in 150 specialist departments in Germany and continually developed. The project shows that such a program can be systematically developed and pilot studies can be carried out. The central problems in implementation involve the traditional informal further education culture, which as a rule does not implement a systematic elicitation of the state of learning continuously distributed over the whole period of further education and the practical testing of competence development.

Performance of concrete joint sealants in hot climates

DOT National Transportation Integrated Search

1987-11-01

A research project was initiated in 1979 on project IR-17-1(126) to compare and evaluate several joint sealants. In 1982 another test section on project F 028-1-506 was established to evaluate several other sealants. This report documents the placeme...

Texture analysis with statistical methods for wheat ear extraction

NASA Astrophysics Data System (ADS)

Bakhouche, M.; Cointault, F.; Gouton, P.

2007-01-01

In agronomic domain, the simplification of crop counting, necessary for yield prediction and agronomic studies, is an important project for technical institutes such as Arvalis. Although the main objective of our global project is to conceive a mobile robot for natural image acquisition directly in a field, Arvalis has proposed us first to detect by image processing the number of wheat ears in images before to count them, which will allow to obtain the first component of the yield. In this paper we compare different texture image segmentation techniques based on feature extraction by first and higher order statistical methods which have been applied on our images. The extracted features are used for unsupervised pixel classification to obtain the different classes in the image. So, the K-means algorithm is implemented before the choice of a threshold to highlight the ears. Three methods have been tested in this feasibility study with very average error of 6%. Although the evaluation of the quality of the detection is visually done, automatic evaluation algorithms are currently implementing. Moreover, other statistical methods of higher order will be implemented in the future jointly with methods based on spatio-frequential transforms and specific filtering.

Identifying gaps, barriers, and solutions in implementing pressure ulcer prevention programs.

PubMed

Jankowski, Irene M; Nadzam, Deborah Morris

2011-06-01

Patients continue to suffer from pressure ulcers (PUs), despite implementation of evidence-based pressure ulcer (PU) prevention protocols. In 2009, Joint Commission Resources (JCR) and Hill-Rom created the Nurse Safety Scholar-in-Residence (nurse scholar) program to foster the professional development of expert nurse clinicians to become translators of evidence into practice. The first nurse scholar activity has focused on PU prevention. Four hospitals with established PU programs participated in the PU prevention implementation project. Each hospital's team completed an inventory of PU prevention program components and provided copies of accompanying documentation, along with prevalence and incidence data. Site visits to the four participating hospitals were arranged to provide opportunities for more in-depth analysis and support. Following the initial site visit, the project team at each hospital developed action plans for the top three barriers to PU program implementation. A series of conference calls was held between the site visits. Pressure Ulcer Program Gaps and Recommendations. The four hospitals shared common gaps in terms of limitations in staff education and training; lack of physician involvement; limited involvement of unlicensed nursing staff; lack of plan for communicating at-risk status; and limited quality improvement evaluations of bedside practices. Detailed recommendations were identified for addressing each of these gaps. these Recommendations for eliminating gaps have been implemented by the participating teams to drive improvement and to reduce hospital-acquired PU rates. The nurse scholars will continue to study implementation of best practices for PU prevention.

DEFI Photonique: a French national training project for optics and photonics industry

NASA Astrophysics Data System (ADS)

Boéri, E.; Cormier, E.

2014-07-01

The French government supports a structuring project for French Photonics. This project name DEFI Photonique is carried by the CNOP (National Committee for Optics and Photonics) for a period of 5 years (2013-2017). One of the most important tasks is dedicated to training for industry, particularly SMEs. The project aims at elaborating a training offer based on the experience of PYLA, the Bordeaux training facility for Optics and Photonics, and create a national network throughout all the French Photonics clusters. The project plans to initiate, develop and coordinate training courses based on the players skills in the sector, in particular regional clusters, depending on their field of excellence. This deployment of training courses should enable a mesh structure both thematically and geographically. Collaborative work between training players in each pole, including joint actions, will facilitate access to training courses for companies, especially SMEs. A market survey is already being conducted in 2013 in photonics industry and application sectors. Implementation of actions involves all French photonics clusters as well as professional organizations. We will rely on the feedback we have with PYLA to show how training courses can be a strategic tool for development of technologies and industries. At this stage of the DEFI Photonique project we will be able to present the results of different analyses that have been conducted in key sectors and plans that will be implemented for the realization of the first actions.

Limited-angle multi-energy CT using joint clustering prior and sparsity regularization

NASA Astrophysics Data System (ADS)

Zhang, Huayu; Xing, Yuxiang

2016-03-01

In this article, we present an easy-to-implement Multi-energy CT scanning strategy and a corresponding reconstruction method, which facilitate spectral CT imaging by improving the data efficiency the number-of-energy- channel fold without introducing visible limited-angle artifacts caused by reducing projection views. Leveraging the structure coherence at different energies, we first pre-reconstruct a prior structure information image using projection data from all energy channels. Then, we perform a k-means clustering on the prior image to generate a sparse dictionary representation for the image, which severs as a structure information constraint. We com- bine this constraint with conventional compressed sensing method and proposed a new model which we referred as Joint Clustering Prior and Sparsity Regularization (CPSR). CPSR is a convex problem and we solve it by Alternating Direction Method of Multipliers (ADMM). We verify our CPSR reconstruction method with a numerical simulation experiment. A dental phantom with complicate structures of teeth and soft tissues is used. X-ray beams from three spectra of different peak energies (120kVp, 90kVp, 60kVp) irradiate the phantom to form tri-energy projections. Projection data covering only 75◦ from each energy spectrum are collected for reconstruction. Independent reconstruction for each energy will cause severe limited-angle artifacts even with the help of compressed sensing approaches. Our CPSR provides us with images free of the limited-angle artifact. All edge details are well preserved in our experimental study.

Outline and Evaluation of a Joint European and Canadian Virtual Mobility: e-Learning Project

ERIC Educational Resources Information Center

Hilliard, Alan

2006-01-01

The "virtual mobility" project was created as part of a joint Canadian and European Commission funded project to explore cross-cultural clinical curricular developments in the radiation sciences. The aim of the project was to facilitate student learning of the cross-cultural differences in the delivery of healthcare within the…

Annular Suspension and Pointing System (ASPS) magnetic rotary joint

NASA Technical Reports Server (NTRS)

Smith, W. E.; Quach, W.; Thomas, W.

1993-01-01

The Annular Suspension and Pointing System (ASPS) is a prototype of flight hardware for a high-accuracy space payload pointing mount. The long term project objective is to perform modifications and implement improvements to the existing ASPS in hopes of recommission. Also, new applications will be investigated for this technology. This report will focus on the first aspect of this overall goal, to establish operation of a single bearing station. Presented is an overview of the system history and bearing operation followed by the processes, results, and status of the single bearing study.

Parallel Event Analysis Under Unix

NASA Astrophysics Data System (ADS)

Looney, S.; Nilsson, B. S.; Oest, T.; Pettersson, T.; Ranjard, F.; Thibonnier, J.-P.

The ALEPH experiment at LEP, the CERN CN division and Digital Equipment Corp. have, in a joint project, developed a parallel event analysis system. The parallel physics code is identical to ALEPH's standard analysis code, ALPHA, only the organisation of input/output is changed. The user may switch between sequential and parallel processing by simply changing one input "card". The initial implementation runs on an 8-node DEC 3000/400 farm, using the PVM software, and exhibits a near-perfect speed-up linearity, reducing the turn-around time by a factor of 8.

Development, implementation and evaluation of satellite-aided agricultural monitoring systems

NASA Technical Reports Server (NTRS)

Cicone, R. C.; Crist, E. P.; Metzler, M.; Nuesch, D.

1982-01-01

Research activities in support of AgRISTARS Inventory Technology Development Project in the use of aerospace remote sensing for agricultural inventory described include: (1) corn and soybean crop spectral temporal signature characterization; (2) efficient area estimation techniques development; and (3) advanced satellite and sensor system definition. Studies include a statistical evaluation of the impact of cultural and environmental factors on crop spectral profiles, the development and evaluation of an automatic crop area estimation procedure, and the joint use of SEASAT-SAR and LANDSAT MSS for crop inventory.

Scheduling the Remediation of Port Hope: Logistical and Regulatory Challenges of a Multiple Site Urban Remediation Project - 13119

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ferguson Jones, Andrea; Lee, Angela; Palmeter, Tim

2013-07-01

The Port Hope Project is part of the larger CAN$1.28 billion Port Hope Area Initiative (PHAI), a community-based program for the development and implementation of a safe, local, long-term management solution for historic Low-Level Radioactive Waste (LLRW) in the Municipalities of Port Hope and Clarington, Ontario, Canada. Atomic Energy of Canada (AECL) is the Project Proponent, Public Works and Government Services (PWGSC) is managing the procurement of services and the MMM Group Limited - Conestoga Rovers and Associates Joint Venture (MMM-CRA Joint Venture) is providing detailed design and construction oversight and administration services for the Project. The Port Hope Projectmore » includes the construction of a long-term waste management facility (LTWMF) in the Municipality of Port Hope and the remediation of 18 (eighteen) large-scale LLRW, numerous small-scale sites still being identified and industrial sites within the Municipality. The total volume to be remediated is over one million cubic metres and will come from sites that include temporary storage sites, ravines, beaches, parks, private commercial and residential properties and vacant industrial sites all within the urban area of Port Hope. Challenges that will need to be overcome during this 10 year project include: - Requirements stipulated by the Environmental Assessment (EA) that affect Project logistics and schedule. - Coordination of site remediation with the construction schedule at the LTWMF. - Physical constraints on transport routes and at sites affecting production rates. - Despite being an urban undertaking, seasonal constrains for birds and fish (i.e., nesting and spawning seasons). - Municipal considerations. - Site-specific constraints. - Site interdependencies exist requiring consideration in the schedule. Several sites require the use of an adjacent site for staging. (authors)« less

Community participation in primary health care projects of the Muldersdrift Health and Development Programme.

PubMed

Barker, M; Klopper, H

2007-06-01

After numerous teething problems (1974-1994), the Department of Nursing Education of WITS University took responsibility for the Muldersdrift Health and Development Programme (MHDP). The nursing science students explored and implemented an empowerment approach to community participation. The students worked with MHDP health workers to improve health through community participation, in combination with primary health care (PHC) activities and the involvement of a variety of community groups. As the PHC projects evolved over time, the need arose to evaluate the level of community participation and how much community ownership was present over decision-making and resources. This led to the question "What was the level of community participation in PHC projects of the MHDP?" Based on the question the following objectives were set, i.e. (i) to evaluate the community participation in PHC initiatives; (ii) to provide the project partners with motivational affirmation on the level of community participation criteria thus far achieved; (iii) to indicate to participants the mechanisms that should still be implemented if they wanted to advance to higher levels of community participation; (iv) to evaluate the MHDP's implementation of a people-centred approach to community participation in PHC; and (v) the evaluation of the level of community participation in PHC projects in the MHDP. An evaluative, descriptive, contextual and quantitative research design was used. Ethical standards were adhered to throughout the study. The MHDP had a study population of twenty-three (N=23) PHC projects. A purposive sample of seven PHC initiatives was chosen according to specific selection criteria and evaluated according to the "Criteria to evaluate community participation in PHC projects" instrument (a quantitative tool). Structured group interviews were done with PHC projects' executive committee members. The Joint Management Committee's data was collected through mailed self-administered questionnaires. Validity and reliability were ensured according to strict criteria. Thereafter results were analysed and plotted on a radiating arm continuum. The following factors had component scores: organization, leadership, resources, management; needs and skills. A spider graph was produced after each factor's continuum was connected in a spoke figuration that brought them together at the base where participation was at its most narrow. The results are presented and a graph and discussion is provided on each of the PHC projects. The research results indicated that although community participation was broadened, there was minimal success in forcing a shift in power over decision-making and resources. This demonstrated that power over planning and resources should remain in the hands of the partners if community participation was to remain progressive and sustained. Results furthermore indicated that the people-centred approach to With regard to the Joint Management Committee's evaluation of community participation, it was concluded that power over decision-making and resources remained with health professionals rather than with the community, and that a people-centred approach had not been adopted.

LANDFIRE: Collaboration for National Fire Fuel Assessment

USGS Publications Warehouse

Zhu, Zhi-Liang

2006-01-01

The implementation of national fire management policies, such as the National Fire Plan and the Healthy Forest Restoration Act, requires geospatial data of vegetation types and structure, wildland fuels, fire risks, and ecosystem fire regime conditions. Presently, no such data sets are available that can meet these requirements. As a result, the U.S. Department of Agriculture (USDA) Forest Service and the Department of the Interior's land management bureaus (Bureau of Indian Affairs (BIA), Bureau of Land Management (BLM), Fish and Wildlife Service (FWS), and National Park Service (NPS)) have jointly sponsored LANDFIRE, a new research and development project. The primary objective of the project is to develop an integrated and repeatable methodology and produce vegetation, fire, and ecosystem information and predictive models for cost-effective national land management applications. The project is conducted collaboratively by the U.S. Geological Survey (USGS), the USDA Forest Service, and The Nature Conservancy.

Project financing of district heating/cooling systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feldman, R.D.

1986-03-01

Two issues are discussed in detail: the project finance joint venture and technology transfers. An increase if the frequency of these issues has been served in project financings. An understanding of these issues is necessary to structure project financings of alternate energy projects in the future. Capitalization needs are outlined, and typical provisions of a joint finance structure are outlined. The issue of exclusivity as it applies to technology transfers is discussed.

APEX-CAMBIUM: A Case Study in Advantages and Challenges of International Cooperation for the International Space Station

NASA Technical Reports Server (NTRS)

Cox, David; Buckley, Nicole

2008-01-01

It is generally agreed that space science benefits from an international collaboration. There are different mechanisms to make this happen but to recognize opportunities requires a keen awareness of the activities, people and respective strengths. Apex- Cambium is a joint Canadian Space Agency (CSA)-National Aeronautics and Space Administration (NASA) initiative. It was made possible in large part through the good relations and shared willingness to meet a common objective, that of doing exciting science in space. The actual mechanics of bringing an international project together can be divided into two perspectives: programmatic and implementation. The programmatic component includes recognizing complementarities, bringing science together, and the need to have Agencies approve and accept joint responsibility for the mission. The implementation component involves working to define science requirements, available resources and assigning individual responsibilities while keeping the overall success criteria as a collective objective. The APEX-CAMB11.JM mission will be described from the point of view of both CSA and NASA. Suggestions on how to facilitate these types of initiatives will be provided and highlights of the APEX-Cambium collaboration will be provided.

23 CFR 450.330 - Project selection from the TIP.

Code of Federal Regulations, 2010 CFR

2010-04-01

... projects shall be jointly developed by the MPO, the State, and the public transportation operator(s) if requested by the MPO, the State, or the public transportation operator(s). If the State or public... the MPO, the State, and the public transportation operator(s) jointly develop expedited project...

NASA-DoD Lower Process Temperature Lead-Free Solder Project Overview

NASA Technical Reports Server (NTRS)

Kessel, Kurt R.

2014-01-01

This project is a follow-on effort to the Joint Council on Aging AircraftJoint Group on Pollution Prevention (JCAAJG-PP) Pb-free Solder Project and NASA-DoD Lead-Free Electronics Project which were the first projects to test the reliability of Pb-free solder joints against the requirements of the aerospace and military community. This effort would continue to build on the results from the JCAAJG-PP Lead-Free Solder Project and NASA-DoD Lead-Free Electronics Project while focusing on a particular failure mechanism currently plaguing Pb-free assemblies, pad cratering.The NASA-DoD Lead-Free Electronics Project confirmed that pad cratering is one of the dominant failure modes that occur in various board level reliability tests, especially under dynamic loading. Pad Cratering is a latent defect that may occur during assembly, rework, and post assembly handling and testing.

HMA Longitudinal Joint Evaluation and Construction

DOT National Transportation Integrated Search

2011-02-01

Longitudinal joint quality is essential to the successful performance of asphalt pavements. A number of states have begun to implement longitudinal joint specifications, and most are based on determinations of density. However, distress at the joint ...

Modeling and Analysis of Space Based Transceivers

NASA Technical Reports Server (NTRS)

Moore, Michael S.; Price, Jeremy C.; Reinhart, Richard; Liebetreu, John; Kacpura, Tom J.

2005-01-01

This paper presents the tool chain, methodology, and results of an on-going study being performed jointly by Space Communication Experts at NASA Glenn Research Center (GRC), General Dynamics C4 Systems (GD), and Southwest Research Institute (SwRI). The team is evaluating the applicability and tradeoffs concerning the use of Software Defined Radio (SDR) technologies for Space missions. The Space Telecommunications Radio Systems (STRS) project is developing an approach toward building SDR-based transceivers for space communications applications based on an accompanying software architecture that can be used to implement transceivers for NASA space missions. The study is assessing the overall cost and benefit of employing SDR technologies in general, and of developing a software architecture standard for its space SDR transceivers. The study is considering the cost and benefit of existing architectures, such as the Joint Tactical Radio Systems (JTRS) Software Communications Architecture (SCA), as well as potential new space-specific architectures.

Development of an improved GTA (gas tungsten arc) weld temperature monitor fixture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hollar, D.L.

1990-05-01

An initial design weld temperature control fixture was implemented into final closure of an electronic assembly in November 1986. Use of this fixture indicated several areas that could be improved. Review of these areas with the process engineer and the weld operator provided the ideas to be incorporated into the new design Phase 2 fixture. Some primary areas of change and improvement included fixture mobility to provide better accessibility to the weld joint area, automatic timed blow cooling of the weld joint, and a feature to assure proper thermocouple placement. The resulting Phase 2 fixture design provided all of themore » essential weld temperature monitoring features in addition to several significant improvements. Technology developed during this project will pave the way to similar process monitoring of other manual gas tungsten arc (GTA) welding applications. 9 figs.« less

Beyond grid security

NASA Astrophysics Data System (ADS)

Hoeft, B.; Epting, U.; Koenig, T.

2008-07-01

While many fields relevant to Grid security are already covered by existing working groups, their remit rarely goes beyond the scope of the Grid infrastructure itself. However, security issues pertaining to the internal set-up of compute centres have at least as much impact on Grid security. Thus, this talk will present briefly the EU ISSeG project (Integrated Site Security for Grids). In contrast to groups such as OSCT (Operational Security Coordination Team) and JSPG (Joint Security Policy Group), the purpose of ISSeG is to provide a holistic approach to security for Grid computer centres, from strategic considerations to an implementation plan and its deployment. The generalised methodology of Integrated Site Security (ISS) is based on the knowledge gained during its implementation at several sites as well as through security audits, and this will be briefly discussed. Several examples of ISS implementation tasks at the Forschungszentrum Karlsruhe will be presented, including segregation of the network for administration and maintenance and the implementation of Application Gateways. Furthermore, the web-based ISSeG training material will be introduced. This aims to offer ISS implementation guidance to other Grid installations in order to help avoid common pitfalls.

Publications - GMC 369 | Alaska Division of Geological & Geophysical

Science.gov Websites

DGGS GMC 369 Publication Details Title: Pyramid Project: Aleut-Quintana-Duval Joint Venture Report on Project: Aleut-Quintana-Duval Joint Venture Report on 1975 Drill Programme: Alaska Division of Geological

Extension and modernisation of the system of municipal heat distribution networks and elimination of emission in the remaining sources

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ciurlik, L.

1995-12-31

After a preliminary conference held in November 1992, the MPEC SA made contact with 6 US companies so as to prepare offers and the implementation of joint projects. According to their assumptions, those tasks had been picked up and prepared in order to be useful in solving a part of problems related with technology and organization which would be encountered by the MPEC SA of that time. Those decisions were well-aimed, yet the long time that had elapsed till the moment of their implementation did affect them in part. The development of free market economy in Poland was taking placemore » without influencing the program assumptions. The MPEC SA was then interested in the enterprises which presented their activity.« less

Student International Research Project on Employees' Involvement in Innovation: Experience and Outcomes

ERIC Educational Resources Information Center

Bondarev, Maxim; Zashchitina, Elena; Andreassen, John-Erik

2016-01-01

This paper represents the experience and outcomes of a joint education and research project of Østfold University College and Southern Federal University. The project goal is to evolve and strengthen the academic cooperation between the universities by developing joint courses and improving the quality of education via mutual exchange of…

Spherical Coordinate Systems for Streamlining Suited Mobility Analysis

NASA Technical Reports Server (NTRS)

Benson, Elizabeth; Cowley, Matthew; Harvill, Lauren; Rajulu. Sudhakar

2015-01-01

Introduction: When describing human motion, biomechanists generally report joint angles in terms of Euler angle rotation sequences. However, there are known limitations in using this method to describe complex motions such as the shoulder joint during a baseball pitch. Euler angle notation uses a series of three rotations about an axis where each rotation is dependent upon the preceding rotation. As such, the Euler angles need to be regarded as a set to get accurate angle information. Unfortunately, it is often difficult to visualize and understand these complex motion representations. It has been shown that using a spherical coordinate system allows Anthropometry and Biomechanics Facility (ABF) personnel to increase their ability to transmit important human mobility data to engineers, in a format that is readily understandable and directly translatable to their design efforts. Objectives: The goal of this project was to use innovative analysis and visualization techniques to aid in the examination and comprehension of complex motions. Methods: This project consisted of a series of small sub-projects, meant to validate and verify a new method before it was implemented in the ABF's data analysis practices. A mechanical test rig was built and tracked in 3D using an optical motion capture system. Its position and orientation were reported in both Euler and spherical reference systems. In the second phase of the project, the ABF estimated the error inherent in a spherical coordinate system, and evaluated how this error would vary within the reference frame. This stage also involved expanding a kinematic model of the shoulder to include the rest of the joints of the body. The third stage of the project involved creating visualization methods to assist in interpreting motion in a spherical frame. These visualization methods will be incorporated in a tool to evaluate a database of suited mobility data, which is currently in development. Results: Initial results demonstrated that a spherical coordinate system is helpful in describing and visualizing the motion of a space suit. The system is particularly useful in describing the motion of the shoulder, where multiple degrees of freedom can lead to very complex motion paths.

Engagement studios: students and communities working to address the determinants of health.

PubMed

Bainbridge, Lesley; Grossman, Susan; Dharamsi, Shafik; Porter, Jill; Wood, Victoria

2014-01-01

This article presents an innovative model for interprofessional community-oriented learning. The Engagement Studios model involves a partnership between community organizations and students as equal partners in conversations and activities aimed at addressing issues of common concern as they relate to the social determinants of health. Interprofessional teams of students from health and non-health disciplines work with community partners to identify priority community issues and explore potential solutions. The student teams work with a particular community organization, combining their unique disciplinary perspectives to develop a project proposal, which addresses the community issues that have been jointly identified. Approved proposals receive a small budget to implement the project. In this paper we present the Engagement Studios model and share lessons learned from a pilot of this educational initiative.

A Report of Bethune-Cookman College NASA JOVE Projects

NASA Technical Reports Server (NTRS)

Agba, Lawrence C.; David, Sunil K.; Rao, Narsing G.; Rahmani, Munir A.

1997-01-01

This document is the final report for the Joint Venture (JOVE) in Space Sciences, and describes the tasks, performed with the support of the contract. These tasks include work in: (1) interfacing microprocessor systems to high performance parallel interface chips, SCSI drive and memory, needed for the implementation of a Space Optical Data Recorder; (2) designing a digital interface architecture for a microprocessor controlled sensors monitoring unit for a NASA Jitter Attenuation and Dynamics Experiment (JADE) project; (3) developing an enhanced back-propagation training algorithm; (4) studying the effect of simulated spaceflight on Aortic Contractility; (5) developing a course in astronomy; and (6) improving internet access by running cables, and installing hubs in various places on the campus; and (7) researching the characteristics of Nd:YALO laser resonator.

Using NASA's Reference Architecture: Comparing Polar and Geostationary Data Processing Systems

NASA Technical Reports Server (NTRS)

Ullman, Richard; Burnett, Michael

2013-01-01

The JPSS and GOES-R programs are housed at NASA GSFC and jointly implemented by NASA and NOAA to NOAA requirements. NASA's role in the JPSS Ground System is to develop and deploy the system according to NOAA requirements. NASA's role in the GOES-R ground segment is to provide Systems Engineering expertise and oversight for NOAA's development and deployment of the system. NASA's Earth Science Data Systems Reference Architecture is a document developed by NASA's Earth Science Data Systems Standards Process Group that describes a NASA Earth Observing Mission Ground system as a generic abstraction. The authors work within the respective ground segment projects and are also separately contributors to the Reference Architecture document. Opinions expressed are the author's only and are not NOAA, NASA or the Ground Projects' official positions.

Clinical aspects of the Mayo/IBM PACS project

NASA Astrophysics Data System (ADS)

Forbes, Glenn S.; Morin, Richard L.; Pavlicek, William

1991-07-01

A joint project between Mayo Clinic and IBM to develop a picture archival and communications system has been under development for three years. This project began as a potential solution to a pressing archival problem in magnetic resonance imaging. The project has grown to encompass a much larger sphere of activity including workstations, image retrieval, and report archival. This report focuses on the clinical aspects involved in the design, development, and implementation of such a system. In particular, emphasis is placed on the clinical impact of the system both inside and outside of the radiology department. The primary concerns have centered on fidelity of archival data, ease of use, and diagnostic efficacy. The project to date has been limited to neuroradiology practice. This group consists of nine staff radiologists and fellows. Administrative policy decisions regarding the accessibility and available of digital data in the clinical environment have been much more difficult and complex than originally conceived. Based on the observations thus far, the authors believe the system will become a useful and valuable adjunct to clinical practice of radiology.

Greenhouse gas mitigation options in the Forest sector of Russia: National and project level assessments

NASA Astrophysics Data System (ADS)

Vinson, Ted S.; Kolchugina, Tatyana P.; Andrasko, Kenneth A.

1996-01-01

Greenhouse gas (GHG) mitigation options in the Russian forest sector include: afforestation and reforestation of unforested/degraded land area; enhanced forest productivity; incorporation of nondestructive methods of wood harvesting in the forest industry; establishment of land protective forest stands; increase in stand age of final harvest in the European part of Russia; increased fire control; increased disease and pest control; and preservation of old growth forests in the Russian Far-East, which are presently threatened. Considering the implementation of all of the options presented, the GHG mitigation potential within the forest and agroforestry sectors of Russia is approximately 0.6 0.7 Pg C/yr or one half of the industrial carbon emissions of the United States. The difference between the GHG mitigation potential and the actual level of GHGs mitigated in the Russian forest sector will depend to a great degree on external financing that may be available. One possibility for external financing is through joint implementation (JI). However, under the JI process, each project will be evaluated by considering a number of criteria including also the difference between the carbon emissions or sequestration for the baseline (or reference) and the project case, the permanence of the project, and leakage. Consequently, a project level assessment must appreciate the near-term constraints that will face practitioners who attempt to realize the GHG mitigation potential in the forest and agroforestry sectors of their countries.

Impact of the economic downturn on total joint replacement demand in the United States: updated projections to 2021.

PubMed

Kurtz, Steven M; Ong, Kevin L; Lau, Edmund; Bozic, Kevin J

2014-04-16

Few studies have explored the role of the National Health Expenditure and macroeconomics on the utilization of total joint replacement. The economic downturn has raised questions about the sustainability of growth for total joint replacement in the future. Previous projections of total joint replacement demand in the United States were based on data up to 2003 using a statistical methodology that neglected macroeconomic factors, such as the National Health Expenditure. Data from the Nationwide Inpatient Sample (1993 to 2010) were used with United States Census and National Health Expenditure data to quantify historical trends in total joint replacement rates, including the two economic downturns in the 2000s. Primary and revision hip and knee arthroplasty were identified using codes from the International Classification of Diseases, Ninth Revision, Clinical Modification. Projections in total joint replacement were estimated using a regression model incorporating the growth in population and rate of arthroplasties from 1993 to 2010 as a function of age, sex, race, and census region using the National Health Expenditure as the independent variable. The regression model was used in conjunction with government projections of National Health Expenditure from 2011 to 2021 to estimate future arthroplasty rates in subpopulations of the United States and to derive national estimates. The growth trend for the incidence of joint arthroplasty, for the overall United States population as well as for the United States workforce, was insensitive to economic downturns. From 2009 to 2010, the total number of procedures increased by 6.0% for primary total hip arthroplasty, 6.1% for primary total knee arthroplasty, 10.8% for revision total hip arthroplasty, and 13.5% for revision total knee arthroplasty. The National Health Expenditure model projections for primary hip replacement in 2020 were higher than a previously projected model, whereas the current model estimates for total knee arthroplasty were lower. Economic downturns in the 2000s did not substantially influence the national growth trends for hip and knee arthroplasty in the United States. These latest updated projections provide a basis for surgeons, hospitals, payers, and policy makers to plan for the future demand for total joint replacement surgery.

Multi-Center Implementation of NPR 7123.1A: A Collaborative Effort

NASA Technical Reports Server (NTRS)

Hall, Phillip B.; McNelis, Nancy B.

2011-01-01

Collaboration efforts between MSFC and GRC Engineering Directorates to implement the NASA Systems Engineering (SE) Engine have expanded over the past year to include other NASA Centers. Sharing information on designing, developing, and deploying SE processes has sparked further interest based on the realization that there is relative consistency in implementing SE processes at the institutional level. This presentation will provide a status on the ongoing multi-center collaboration and provide insight into how these NPR 7123.1A SE-aligned directives are being implemented and managed to better support the needs of NASA programs and projects. NPR 7123.1A, NASA Systems Engineering Processes and Requirements, was released on March 26, 2007 to clearly articulate and establish the requirements on the implementing organization for performing, supporting, and evaluating SE activities. In early 2009, MSFC and GRC Engineering Directorates undertook a collaborative opportunity to share their research and work associated with developing, updating and revising their SE process policy to comply and align with NPR 7123.1A. The goal is to develop instructions, checklists, templates, and procedures for each of the 17 SE process requirements so that systems engineers will be a position to define work that is process-driven. Greater efficiency and more effective technical management will be achieved due to consistency and repeatability of SE process implementation across and throughout each of the NASA centers. An added benefit will be to encourage NASA centers to pursue and collaborate on joint projects as a result of using common or similar processes, methods, tools, and techniques.

Assessing participatory practices in community-based natural resource management: experiences in community engagement from southern Africa.

PubMed

Dyer, J; Stringer, L C; Dougill, A J; Leventon, J; Nshimbi, M; Chama, F; Kafwifwi, A; Muledi, J I; Kaumbu, J-M K; Falcao, M; Muhorro, S; Munyemba, F; Kalaba, G M; Syampungani, S

2014-05-01

The emphasis on participatory environmental management within international development has started to overcome critiques of traditional exclusionary environmental policy, aligning with shifts towards decentralisation and community empowerment. However, questions are raised regarding the extent to which participation in project design and implementation is meaningful and really engages communities in the process. Calls have been made for further local-level (project and community-scale) research to identify practices that can increase the likelihood of meaningful community engagement within externally initiated projects. This paper presents data from three community-based natural resource management (CBNRM) project case studies from southern Africa, which promote Joint Forest Management (JFM), tree planting for carbon and conservation agriculture. Data collection was carried out through semi-structured interviews with key stakeholders, community-level meetings, focus groups and interviews. We find that an important first step for a meaningful community engagement process is to define 'community' in an open and participatory manner. Two-way communication at all stages of the community engagement process is shown to be critical, and charismatic leadership based on mutual respect and clarity of roles and responsibilities is vital to improve the likelihood of participants developing understanding of project aims and philosophy. This can lead to successful project outcomes through community ownership of the project goals and empowerment in project implementation. Specific engagement methods are found to be less important than the contextual and environmental factors associated with each project, but consideration should be given to identifying appropriate methods to ensure community representation. Our findings extend current thinking on the evaluation of participation by making explicit links between the community engagement process and project outcomes, and by identifying further criteria that can be considered in process and outcome-based evaluations. We highlight good practices for future CBNRM projects which can be used by project designers and initiators to further the likelihood of successful project outcomes. Copyright © 2014. Published by Elsevier Ltd.

Structural attachments for large space structures

NASA Technical Reports Server (NTRS)

Pruett, E. C.; Loughead, T. E.; Robertson, K. B., III

1980-01-01

The feasibility of fabricating beams in space and using them as components of a large, crew assembled structure, was investigated. Two projects were undertaken: (1) design and development of a ground version of an automated beam builder capable of producing triangular cross section aluminum beams; and (2) design and fabrication of lap joints to connect the beams orthogonally and centroidal end caps to connect beams end to end at any desired angle. The first project produced a beam building machine which fabricates aluminum beams suitable for neutral buoyancy evaluation. The second project produced concepts for the lap joint and end cap. However, neither of these joint concepts was suitable for use by a pressure suited crew member in a zero gravity environment. It is concluded that before the beams can be evaluated the joint designs need to be completed and sufficient joints produced to allow assembly of a complex structure.

Improving transition of care for veterans after total joint replacement.

PubMed

Green, Uthona R; Dearmon, Valorie; Taggart, Helen

2015-01-01

Patients transitioning from hospital to home are at risk for readmission to the hospital. Readmissions are costly and occur too often. Standardized discharge education processes have shown to decrease readmissions. The purpose of this quality improvement project was to utilize evidence-based practice changes to decrease 30-day all-cause readmissions after total joint replacement. Review of literature revealed that improved discharge education can decrease unnecessary readmissions after discharge. A quality improvement project was developed including standardized total joint replacement discharge education, teach-back education methodology, and improved postdischarge telephone follow-up. The quality improvement project was initiated and outcomes were evaluated. Improving coordination of the discharge process, enhanced education for patients/caregivers, and postdischarge follow-up decreased total joint replacement readmissions.

Adaptive independent joint control of manipulators - Theory and experiment

NASA Technical Reports Server (NTRS)

Seraji, H.

1988-01-01

The author presents a simple decentralized adaptive control scheme for multijoint robot manipulators based on the independent joint control concept. The proposed control scheme for each joint consists of a PID (proportional integral and differential) feedback controller and a position-velocity-acceleration feedforward controller, both with adjustable gains. The static and dynamic couplings that exist between the joint motions are compensated by the adaptive independent joint controllers while ensuring trajectory tracking. The proposed scheme is implemented on a MicroVAX II computer for motion control of the first three joints of a PUMA 560 arm. Experimental results are presented to demonstrate that trajectory tracking is achieved despite strongly coupled, highly nonlinear joint dynamics. The results confirm that the proposed decentralized adaptive control of manipulators is feasible, in spite of strong interactions between joint motions. The control scheme presented is computationally very fast and is amenable to parallel processing implementation within a distributed computing architecture, where each joint is controlled independently by a simple algorithm on a dedicated microprocessor.

Fighting Hepatitis B in North Korea: Feasibility of a Bi-modal Prevention Strategy

PubMed Central

Stich, August

2015-01-01

In North Korea, the prevalence of hepatitis B is high due to natural factors, gaps in vaccination, and the lack of antiviral treatment. Aid projects are urgently needed, however impeded by North Korea's political and economical situation and isolation. The feasibility of a joint North Korean and German humanitarian hepatitis B prevention program was assessed. Part 1: Hepatitis B vaccination catch-up campaign. Part 2: Implementation of endoscopic ligation of esophageal varices (EVL) by trainings in Germany and North Korea. By vaccinating 7 million children between 2010 and 2012, the hepatitis B vaccination gap was closed. Coverage of 99.23% was reached. A total of 11 hepatitis B-induced liver cirrhosis patients (mean age 41.1 yr) with severe esophageal varices and previous bleedings were successfully treated by EVL without major complications. A clinical standard operating procedure, a feedback system and a follow-up plan were developed. The bi-modal preventive strategy was implemented successfully. Parts of the project can serve as an example for other low-income countries, however its general transferability is limited due to the special circumstances in North Korea. PMID:26539001

Fighting Hepatitis B in North Korea: Feasibility of a Bi-modal Prevention Strategy.

PubMed

Unnewehr, Markus; Stich, August

2015-11-01

In North Korea, the prevalence of hepatitis B is high due to natural factors, gaps in vaccination, and the lack of antiviral treatment. Aid projects are urgently needed, however impeded by North Korea's political and economical situation and isolation. The feasibility of a joint North Korean and German humanitarian hepatitis B prevention program was assessed. Part 1: Hepatitis B vaccination catch-up campaign. Part 2: Implementation of endoscopic ligation of esophageal varices (EVL) by trainings in Germany and North Korea. By vaccinating 7 million children between 2010 and 2012, the hepatitis B vaccination gap was closed. Coverage of 99.23% was reached. A total of 11 hepatitis B-induced liver cirrhosis patients (mean age 41.1 yr) with severe esophageal varices and previous bleedings were successfully treated by EVL without major complications. A clinical standard operating procedure, a feedback system and a follow-up plan were developed. The bi-modal preventive strategy was implemented successfully. Parts of the project can serve as an example for other low-income countries, however its general transferability is limited due to the special circumstances in North Korea.

Upper ankle joint space detection on low contrast intraoperative fluoroscopic C-arm projections

NASA Astrophysics Data System (ADS)

Thomas, Sarina; Schnetzke, Marc; Brehler, Michael; Swartman, Benedict; Vetter, Sven; Franke, Jochen; Grützner, Paul A.; Meinzer, Hans-Peter; Nolden, Marco

2017-03-01

Intraoperative mobile C-arm fluoroscopy is widely used for interventional verification in trauma surgery, high flexibility combined with low cost being the main advantages of the method. However, the lack of global device-to- patient orientation is challenging, when comparing the acquired data to other intrapatient datasets. In upper ankle joint fracture reduction accompanied with an unstable syndesmosis, a comparison to the unfractured contralateral site is helpful for verification of the reduction result. To reduce dose and operation time, our approach aims at the comparison of single projections of the unfractured ankle with volumetric images of the reduced fracture. For precise assessment, a pre-alignment of both datasets is a crucial step. We propose a contour extraction pipeline to estimate the joint space location for a prealignment of fluoroscopic C-arm projections containing the upper ankle joint. A quadtree-based hierarchical variance comparison extracts potential feature points and a Hough transform is applied to identify bone shaft lines together with the tibiotalar joint space. By using this information we can define the coarse orientation of the projections independent from the ankle pose during acquisition in order to align those images to the volume of the fractured ankle. The proposed method was evaluated on thirteen cadaveric datasets consisting of 100 projections each with manually adjusted image planes by three trauma surgeons. The results show that the method can be used to detect the joint space orientation. The correlation between angle deviation and anatomical projection direction gives valuable input on the acquisition direction for future clinical experiments.

Joint sealant study

DOT National Transportation Integrated Search

1987-09-01

ADOT has approximately 550 lane miles of jointed portland cement pavement under its jurisdiction. The current practice is to saw and seal the joints at the time of construction and reseal the joints under a rehabilitation project. ADOT does not speci...

NASA's F-15B testbed aircraft in flight during the first evaluation flight of the joint NASA/Gulfstream Quiet Spike project

NASA Image and Video Library

2006-08-10

NASA's F-15B testbed aircraft in flight during the first evaluation flight of the joint NASA/Gulfstream Quiet Spike project. The project seeks to verify the structural integrity of the multi-segmented, articulating spike attachment designed to reduce and control a sonic boom.

The control panel for the joint NASA/Gulfstream Quiet Spike project, located in the backseat of NASA's F-15B testbed aircraft

NASA Image and Video Library

2006-08-16

The control panel for the joint NASA/Gulfstream Quiet Spike project, located in the backseat of NASA's F-15B testbed aircraft. The project seeks to verify the structural integrity of the multi-segmented, articulating spike attachment designed to reduce and control a sonic boom.

Composite Technology for Exploration

NASA Technical Reports Server (NTRS)

Fikes, John

2017-01-01

The CTE (Composite Technology for Exploration) Project will develop and demonstrate critical composites technologies with a focus on joints that utilize NASA expertise and capabilities. The project will advance composite technologies providing lightweight structures to support future NASA exploration missions. The CTE project will demonstrate weight-saving, performance-enhancing bonded joint technology for Space Launch System (SLS)-scale composite hardware.

JUPITER PROJECT - JOINT UNIVERSAL PARAMETER IDENTIFICATION AND EVALUATION OF RELIABILITY

EPA Science Inventory

The JUPITER (Joint Universal Parameter IdenTification and Evaluation of Reliability) project builds on the technology of two widely used codes for sensitivity analysis, data assessment, calibration, and uncertainty analysis of environmental models: PEST and UCODE.

Projeto Vida no Vale: universal access to water and sanitation in the North East of Minas Gerais (Brazil)

NASA Astrophysics Data System (ADS)

Kauark-Leite, L.; Vinçon-Leite, B.; Deroubaix, J. F.; Loireau, A.; Silveira, D.; Haddad, E.

2008-08-01

In the rural areas of the developing countries, the access to water supply and sanitation services is still largely inadequate. Poor governance of the water sector is frequently singled out as a cause and reforms are required. Studies analyzing the great diversity of restructuring efforts currently being undertaken in the water sector have not succeeded in determining the most appropriate institutional and economic framework for such reforms. Moreover they underline the lack of documentation on actual projects and call for concrete models and tools for improving water and sanitation services (WSS) and for adapting water utility practice to real conditions. In this context, the Vida no Vale (Life in the Valley) project is aimed at bringing universal access to WSS for all inhabitants of both urban and rural areas, in the north-eastern area of the Brazilian State of Minas Gerais. The project takes sustainable development as its guiding principle, and relies on the joint implementation of an innovative technical design, a governance model involving public participation and subsidiarity, and an economic structure combining financial viability and social equity. Designed at a consistent geographical and hydrological scale, it includes the creation of a regional subsidiary of the existing state water company as a keystone element. The institutional organisation also relies on the creation of a public board consisting of the 92 municipalities of the project region and of the State of Minas Gerais. This board will be in charge of the system's governance. This paper presents the first step of the project (2006), consisting of a feasibility study and the implementation of 9 pilot sub-projects. During the feasibility study, the supply, demand and capacity to pay for water services were defined, existing infrastructure appraised, the necessary amount of investment assessed and an innovative operational model and a sustainable management system, including civil society participation, defined. The main features of the Vida no Vale project have been tested in 9 pilot sub-projects, and implemented in municipalities chosen for their low Human Development Index and for the lack of WSS, in both urban and rural areas. A second phase corresponding to the project's final implementation will run from 2007 to 2011. The Vida no Vale project design resulted in a logical and extensive framework which could be used for developing similar WSS projects in other poor, rural regions, its adaptiveness being a key feature for taking into account the specific, local conditions.

CELSS Antarctic Analog Project (CAAP): A New Paradigm for Polar Life Support and CELSS Research

NASA Technical Reports Server (NTRS)

Bubenheim, David L.; Straight, Christian; Flynn, Michael; Bates, Maynard; Harper, Lynn D. (Technical Monitor)

1994-01-01

The CELSS Antarctic Analog Project (CAAP) is a joint National Science Foundation (NSF) and National Aeronautics and Space Administration (NASA) project for the development, deployment and operation of CELSS technologies at the Amundsen-Scott South Pole Station. CAAP is implemented through the joint NSF/NASA Antarctic Space Analog Program (ASAP), initiated to support the pursuit of future NASA missions and to promote the transfer of space technologies to the NSF. Under a Memorandum of Agreement, the CAAP represents an example of a working dual agency cooperative project. NASA goals are operational testing of CELSS technologies and the conduct of scientific study to facilitate . technology selection, system design and methods development, including human dynamics as required for the operation of a CELSS. Although not fully closed, food production, water purification, and waste recycle and reduction provided by CAAP will improve the quality of life for the South Pole inhabitants, reduce logistics dependence, and minimize environmental impacts associated with human presence on the polar plateau. The CAAP facility will be highly integrated with the new South Pole Station infrastructure and will be composed of a deployed hardware facility and a research activity. This paper will include a description of CAAP and its functionality, conceptual designs, component selection and sizing for the crop growth chamber, crop production expectations, and a brief report on an initial on-site visit. This paper will also provide a discussion of issues associated with power and energy use and the applicability of CAAP to direct technology transfer to society in general and remote communities in particular.

Coupled-Circulation-Chemistry Studies with the Finite-Volume CCM: Trace Gas Transport in the Tropopause Region

NASA Technical Reports Server (NTRS)

Pawson, Steven; Lin, Shian-Jiann; Rood, Richard B.; Nebuda, Sharon; Nielsen, J. Eric; Douglass, Anne R.

2000-01-01

A joint project between the Data Assimilation Office at NASA GSFC and NCAR involves linking the physical packages from the Community Climate Model (CCM) with the flux-form semi-Lagrangian dynamical core developed by Lin and Rood in the DAO. A further development of this model includes the implementation of a chemical package developed by Douglass and colleagues in the Atmospheric Chemistry and Dynamics Branch at NASA GSFC. Results from this coupled dynamics-radiation-chemistry model will be presented, focussing on trace gas transport in the tropopause region.

NASA tire/runway friction projects

NASA Technical Reports Server (NTRS)

Yager, Thomas J.

1995-01-01

The paper reviews several aspects of NASA Langley Research Center's tire/runway friction evaluations directed towards improving the safety and economy of aircraft ground operations. The facilities and test equipment used in implementing different aircraft tire friction studies and other related aircraft ground performance investigations are described together with recent workshop activities at NASA Wallops Flight Facility. An overview of the pending Joint NASA/Transport Canada/FM Winter Runway Friction Program is given. Other NASA ongoing studies and on-site field tests are discussed including tire wear performance and new surface treatments. The paper concludes with a description of future research plans.

Interfacing Computer Aided Parallelization and Performance Analysis

NASA Technical Reports Server (NTRS)

Jost, Gabriele; Jin, Haoqiang; Labarta, Jesus; Gimenez, Judit; Biegel, Bryan A. (Technical Monitor)

2003-01-01

When porting sequential applications to parallel computer architectures, the program developer will typically go through several cycles of source code optimization and performance analysis. We have started a project to develop an environment where the user can jointly navigate through program structure and performance data information in order to make efficient optimization decisions. In a prototype implementation we have interfaced the CAPO computer aided parallelization tool with the Paraver performance analysis tool. We describe both tools and their interface and give an example for how the interface helps within the program development cycle of a benchmark code.

Evaluation of narrow transverse contraction joints in jointed plain concrete pavements.

DOT National Transportation Integrated Search

2006-03-01

This report presents the results of a research project conducted at the Louisiana Transportation Research Center (LTRC) to evaluate the performance of narrow transverse contraction joints to control cracking in jointed plain concrete pavements. In ad...

State Technologies Advancement Collaborative

DOE Office of Scientific and Technical Information (OSTI.GOV)

David S. Terry

2012-01-30

The U. S. Department of Energy (DOE), National Association of State Energy Officials (NASEO), and Association of State Energy Research and Technology Transfer Institutions (ASERTTI) signed an intergovernmental agreement on November 14, 2002, that allowed states and territories and the Federal Government to better collaborate on energy research, development, demonstration and deployment (RDD&D) projects. The agreement established the State Technologies Advancement Collaborative (STAC) which allowed the states and DOE to move RDD&D forward using an innovative competitive project selection and funding process. A cooperative agreement between DOE and NASEO served as the contracting instrument for this innovative federal-state partnership obligatingmore » funds from DOE's Office of Energy Efficiency and Renewable Energy and Office of Fossil Energy to plan, fund, and implement RDD&D projects that were consistent with the common priorities of the states and DOE. DOE's Golden Field Office provided Federal oversight and guidance for the STAC cooperative agreement. The STAC program was built on the foundation of prior Federal-State efforts to collaborate on and engage in joint planning for RDD&D. Although STAC builds on existing, successful programs, it is important to note that it was not intended to replace other successful joint DOE/State initiatives such as the State Energy Program or EERE Special Projects. Overall the STAC process was used to fund, through three competitive solicitations, 35 successful multi-state research, development, deployment, and demonstration projects with an overall average non-federal cost share of 43%. Twenty-two states were awarded at least one prime contract, and organizations in all 50 states and some territories were involved as subcontractors in at least one STAC project. Projects were funded in seven program areas: (1) Building Technologies, (2) Industrial Technologies, (3) Transportation Technologies, (4) Distributed Energy Resources, (5) Hydrogen Technology Learning Centers, (6) Fossil Energy, and (7) Rebuild America.« less

Accelerating the Whiteshell Laboratories Decommissioning Through the Implementation of a Projectized and Delivery-Focused Organization - 13074

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilcox, Brian; Mellor, Russ; Michaluk, Craig

2013-07-01

Whiteshell Laboratories (WL) is a nuclear research site in Canada that was commissioned in 1964 by Atomic Energy of Canada Limited. It covers a total area of approximately 4,375 hectares (10,800 acres) and includes the main campus site, the Waste Management Area (WMA) and outer areas of land identified as not used for or impacted by nuclear development or operations. The WL site employed up to 1100 staff. Site activities included the successful operation of a 60 MW organic liquid-cooled research reactor from 1965 to 1985, and various research programs including reactor safety research, small reactor development, fuel development, biophysicsmore » and radiation applications, as well as work under the Canadian Nuclear Fuel Waste Management Program. In 1997, AECL made a business decision to discontinue research programs and operations at WL, and obtained government concurrence in 1998. The Nuclear Legacy Liabilities Program (NLLP) was established in 2006 by the Canadian Government to remediate nuclear legacy liabilities in a safe and cost effective manner, including the WL site. The NLLP is being implemented by AECL under the governance of a Natural Resources Canada (NRCan)/AECL Joint Oversight Committee (JOC). Significant progress has since been made, and the WL site currently holds the only Canadian Nuclear Safety Commission (CNSC) nuclear research site decommissioning license in Canada. The current decommissioning license is in place until the end of 2018. The present schedule planned for main campus decommissioning is 30 years (to 2037), followed by institutional control of the WMA until a National plan is implemented for the long-term management of nuclear waste. There is an impetus to advance work and complete decommissioning sooner. To accomplish this, AECL has added significant resources, reorganized and moved to a projectized environment. This presentation outlines changes made to the organization, the tools implemented to foster projectization, and the benefits and positive impacts on schedule and delivery. A revised organizational structure was implemented in two phases, starting 2011 April 1, to align WL staff with the common goal of decommissioning the site through the direction of the WL Decommissioning Project General Manager. On 2011 September 1, the second phase of the reorganization was implemented and WL Decommissioning staff was organized under five Divisions: Programs and Regulatory Compliance, General Site Services, Decommissioning Strategic Planning, Nuclear Facilities and Project Delivery. A new Mission, Vision and Objectives were developed for the project, and several productivity enhancements are being implemented. These include the use of an integrated and fully re-sourced Site Wide Schedule that is updated and reviewed at Plan-of-the-Week meetings, improved work distribution throughout the year, eliminating scheduling 'push' mentality, project scoreboards, work planning implementation, lean practices and various process improvement initiatives. A revised Strategic Plan is under development that reflects the improved project delivery capabilities. As a result of these initiatives, and a culture change towards a projectized approach, the decommissioning schedule will be advanced by approximately 10 years. (authors)« less

Boom and chassis articulation joints

NASA Technical Reports Server (NTRS)

Murphy, Joel T., Jr.; Nguyen, Vien; Turner, Bonnie; Wheeler, Bobby; Williams, Kimberlyn

1992-01-01

The primary goal of our design project was to develop articulation joints for the chassis and boom of the proof-of-concept lunar vehicle. This is an ongoing project and the work of previous student groups was extensively reviewed. Some of the ideas generated are variations of past proposals. Although the project is funded by NASA/USRA, it is totally a student design effort.

Bayesian Probabilistic Projection of International Migration.

PubMed

Azose, Jonathan J; Raftery, Adrian E

2015-10-01

We propose a method for obtaining joint probabilistic projections of migration for all countries, broken down by age and sex. Joint trajectories for all countries are constrained to satisfy the requirement of zero global net migration. We evaluate our model using out-of-sample validation and compare point projections to the projected migration rates from a persistence model similar to the method used in the United Nations' World Population Prospects, and also to a state-of-the-art gravity model.

Antibacterial Surface Treatment for Orthopaedic Implants

PubMed Central

Gallo, Jiri; Holinka, Martin; Moucha, Calin S.

2014-01-01

It is expected that the projected increased usage of implantable devices in medicine will result in a natural rise in the number of infections related to these cases. Some patients are unable to autonomously prevent formation of biofilm on implant surfaces. Suppression of the local peri-implant immune response is an important contributory factor. Substantial avascular scar tissue encountered during revision joint replacement surgery places these cases at an especially high risk of periprosthetic joint infection. A critical pathogenic event in the process of biofilm formation is bacterial adhesion. Prevention of biomaterial-associated infections should be concurrently focused on at least two targets: inhibition of biofilm formation and minimizing local immune response suppression. Current knowledge of antimicrobial surface treatments suitable for prevention of prosthetic joint infection is reviewed. Several surface treatment modalities have been proposed. Minimizing bacterial adhesion, biofilm formation inhibition, and bactericidal approaches are discussed. The ultimate anti-infective surface should be “smart” and responsive to even the lowest bacterial load. While research in this field is promising, there appears to be a great discrepancy between proposed and clinically implemented strategies, and there is urgent need for translational science focusing on this topic. PMID:25116685

Lunar surface vehicle model competition

NASA Technical Reports Server (NTRS)

1990-01-01

During Fall and Winter quarters, Georgia Tech's School of Mechanical Engineering students designed machines and devices related to Lunar Base construction tasks. These include joint projects with Textile Engineering students. Topics studied included lunar environment simulator via drop tower technology, lunar rated fasteners, lunar habitat shelter, design of a lunar surface trenching machine, lunar support system, lunar worksite illumination (daytime), lunar regolith bagging system, sunlight diffusing tent for lunar worksite, service apparatus for lunar launch vehicles, lunar communication/power cables and teleoperated deployment machine, lunar regolith bag collection and emplacement device, soil stabilization mat for lunar launch/landing site, lunar rated fastening systems for robotic implementation, lunar surface cable/conduit and automated deployment system, lunar regolith bagging system, and lunar rated fasteners and fastening systems. A special topics team of five Spring quarter students designed and constructed a remotely controlled crane implement for the SKITTER model.

Sustaining Reliability on Accountability Measures at The Johns Hopkins Hospital.

PubMed

Pronovost, Peter J; Holzmueller, Christine G; Callender, Tiffany; Demski, Renee; Winner, Laura; Day, Richard; Austin, J Matthew; Berenholtz, Sean M; Miller, Marlene R

2016-02-01

In 2012 Johns Hopkins Medicine leaders challenged their health system to reliably deliver best practice care linked to nationally vetted core measures and achieve The Joint Commission Top Performer on Key Quality Measures ®program recognition and the Delmarva Foundation award. Thus, the Armstrong Institute for Patient Safety and Quality implemented an initiative to ensure that ≥96% of patients received care linked to measures. Nine low-performing process measures were targeted for improvement-eight Joint Commission accountability measures and one Delmarva Foundation core measure. In the initial evaluation at The Johns Hopkins Hospital, all accountability measures for the Top Performer program reached the required ≥95% performance, gaining them recognition by The Joint Commission in 2013. Efforts were made to sustain performance of accountability measures at The Johns Hopkins Hospital. Improvements were sustained through 2014 using the following conceptual framework: declare and communicate goals, create an enabling infrastructure, engage clinicians and connect them in peer learning communities, report transparently, and create accountability systems. One part of the accountability system was for teams to create a sustainability plan, which they presented to senior leaders. To support sustained improvements, Armstrong Institute leaders added a project management office for all externally reported quality measures and concurrent reviewers to audit performance on care processes for certain measure sets. The Johns Hopkins Hospital sustained performance on all accountability measures, and now more than 96% of patients receive recommended care consistent with nationally vetted quality measures. The initiative methods enabled the transition of quality improvement from an isolated project to a way of leading an organization.

CARDIO-i2b2: integrating arrhythmogenic disease data in i2b2.

PubMed

Segagni, Daniele; Tibollo, Valentina; Dagliati, Arianna; Napolitano, Carlo; G Priori, Silvia; Bellazzi, Riccardo

2012-01-01

The CARDIO-i2b2 project is an initiative to customize the i2b2 bioinformatics tool with the aim to integrate clinical and research data in order to support translational research in cardiology. In this work we describe the implementation and the customization of i2b2 to manage the data of arrhytmogenic disease patients collected at the Fondazione Salvatore Maugeri of Pavia in a joint project with the NYU Langone Medical Center (New York, USA). The i2b2 clinical research chart data warehouse is populated with the data obtained by the research database called TRIAD. The research infrastructure is extended by the development of new plug-ins for the i2b2 web client application able to properly select and export phenotypic data and to perform data analysis.

Implementation of a gait cycle loading into healthy and meniscectomised knee joint models with fibril-reinforced articular cartilage.

PubMed

Mononen, Mika E; Jurvelin, Jukka S; Korhonen, Rami K

2015-01-01

Computational models can be used to evaluate the functional properties of knee joints and possible risk locations within joints. Current models with fibril-reinforced cartilage layers do not provide information about realistic human movement during walking. This study aimed to evaluate stresses and strains within a knee joint by implementing load data from a gait cycle in healthy and meniscectomised knee joint models with fibril-reinforced cartilages. A 3D finite element model of a knee joint with cartilages and menisci was created from magnetic resonance images. The gait cycle data from varying joint rotations, translations and axial forces were taken from experimental studies and implemented into the model. Cartilage layers were modelled as a fibril-reinforced poroviscoelastic material with the menisci considered as a transversely isotropic elastic material. In the normal knee joint model, relatively high maximum principal stresses were specifically predicted to occur in the medial condyle of the knee joint during the loading response. Bilateral meniscectomy increased stresses, strains and fluid pressures in cartilage on the lateral side, especially during the first 50% of the stance phase of the gait cycle. During the entire stance phase, the superficial collagen fibrils modulated stresses of cartilage, especially in the medial tibial cartilage. The present computational model with a gait cycle and fibril-reinforced biphasic cartilage revealed time- and location-dependent differences in stresses, strains and fluid pressures occurring in cartilage during walking. The lateral meniscus was observed to have a more significant role in distributing loads across the knee joint than the medial meniscus, suggesting that meniscectomy might initiate a post-traumatic process leading to osteoarthritis at the lateral compartment of the knee joint.

Characterizing the Use of Research-Community Partnerships in Studies of Evidence-Based Interventions in Children’s Community Services

PubMed Central

Brookman-Frazee, Lauren; Stahmer, Aubyn; Stadnick, Nicole; Chlebowski, Colby; Herschell, Amy; Garland, Ann

2015-01-01

This study characterized the use of research community partnerships (RCPs) to tailor evidence-based intervention, training, and implementation models for delivery across different childhood problems and service contexts using a survey completed by project principal investigators and community partners. To build on previous RCP research and to explicate the tacit knowledge gained through collaborative efforts, the following were examined: (1) characteristics of studies using RCP models; (2) RCP functioning, processes, and products; (3) processes of tailoring evidence-based practices (EBPs) for community implementation ; and (4) perceptions of the benefits and challenges of collaborating with community providers and consumers. Results indicated that researchers were solely or jointly involved in the formation of almost all of the RCPs; interpersonal and operational processes were perceived as primary challenges; community partners’ roles included greater involvement in implementation and participant recruitment than more traditional research activities; and the partnership process was perceived to increase the relevance and “fit” of interventions and research. PMID:25578512

A Real-Time Earthquake Precursor Detection Technique Using TEC from a GPS Network

NASA Astrophysics Data System (ADS)

Alp Akyol, Ali; Arikan, Feza; Arikan, Orhan

2016-07-01

Anomalies have been observed in the ionospheric electron density distribution prior to strong earthquakes. However, most of the reported results are obtained by earthquake analysis. Therefore, their implementation in practice is highly problematic. Recently, a novel earthquake precursor detection technique based on spatio-temporal analysis of Total Electron Content (TEC) data obtained from Turkish National Permanent GPS Network (TNPGN) is developed by IONOLAB group (www.ionolab.org). In the present study, the developed detection technique is implemented in a causal setup over the available data set in test phase that enables the real time implementation. The performance of the developed earthquake prediction technique is evaluated by using 10 fold cross validation over the data obtained in 2011. Among the 23 earthquakes that have magnitudes higher than 5, the developed technique can detect precursors of 14 earthquakes while producing 8 false alarms. This study is supported by TUBITAK 115E915 and Joint TUBITAK 114E092 and AS CR 14/001 projects.

A way to motivate Danish GPs to implement a new national service.

PubMed

Kristensen, Alice; Wengler, Bente

2012-01-01

The Common Medicine card (CMC) is a new national service in Denmark which aim is to ensure better patient care and minimize medication errors. All health professionals as well as authorities have to use this system. CMC requires changing the organization of work for both physicians and clinical staff in General Practice (GP). Commissioning of CMC in GP requires a significant effort beyond the technical installation of the solution. Finding the right way to implement a new service in a busy GP has been the main focus of the national project organization MedCom. MedCom has in collaboration with the five regions in Denmark, established a joint plan and has created an implementation model contraining various initiatives including "after hours" meetings for each service provider of EMR (Electronic Medicine Records) in order to disseminate and support the new CMC service. This paper shows the status of the "after hours" meetings effect in dissemination of CMC from August to November 2011.

Learning Problems of Junior Level Children: A Nordic Joint Research Project (No. 2108).

ERIC Educational Resources Information Center

Jansson, Karin, Ed.

1981-01-01

Four cities in Norway, Sweden, and Denmark have been engaged since 1977 in a joint study of the junior level of elementary school. (More than 5,000 pupils are involved in the study.) The Department of Education at the University of Turku joined the project in the autumn term of 1979. The purpose of the Swedish project, reported here, was to…

Initial Results of the Master's Degree Programme in "Leadership in Medicine" – Impact on hospital-based follow-on training of doctors

PubMed Central

Wulfert, Chris-Henrik; Hoitz, Joachim; Senger, Ulrike

2017-01-01

Objective: This pilot project, which was jointly conducted by a hospital and a university, describes the development of the Master's Degree Programme in Leadership in Medicine, a course designed to supplement medical specialty training. The aim of the pilot project is to demonstrate how hospital-based projects on personnel and organisational development undertaken under academic supervision can be used to increase leadership responsibility among doctors whose duties include providing initial and follow-on training and to professionalise medical specialty training as a leadership task. This need arose from the nationwide requirements and an internal audit regarding follow-on training. The version of the degree programme described below aims to further the personnel development of the participants in the field of didactics. Method: Each of the nine modules is made up of two classroom-based phases and one distance learning phase. The distance learning phase involves undertaking hospital-based projects on personnel and organisational development under academic supervision. The pilot phase participants were hospital doctors who, as part of their duties, hold leadership responsibility or are involved in the follow-on training of doctors. Results: The 17 participants successfully implemented more than 30 hospital-based projects during the distance learning phases of the nine modules. These projects included the development of medical specialty curricula, relevant didactic methods and evaluation design and were subsequently presented and subjected to reflection in interdisciplinary groups. The project presentation together with the project report were regarded as proof of competency. Conclusion: In addition to enhancing participant competency, the degree model described, which interlinks theory and practice, promotes organisational development through the implementation of projects undertaken under academic supervision. This has a double impact on the quality of medical follow-on training at the hospital where the participant is based, for not only is the individual's didactic competency enhanced, but so is the "learning organisation" as a whole as a result of continuous project orientation. PMID:29226220

Initial Results of the Master's Degree Programme in "Leadership in Medicine" - Impact on hospital-based follow-on training of doctors.

PubMed

Wulfert, Chris-Henrik; Hoitz, Joachim; Senger, Ulrike

2017-01-01

Objective: This pilot project, which was jointly conducted by a hospital and a university, describes the development of the Master's Degree Programme in Leadership in Medicine, a course designed to supplement medical specialty training. The aim of the pilot project is to demonstrate how hospital-based projects on personnel and organisational development undertaken under academic supervision can be used to increase leadership responsibility among doctors whose duties include providing initial and follow-on training and to professionalise medical specialty training as a leadership task. This need arose from the nationwide requirements and an internal audit regarding follow-on training. The version of the degree programme described below aims to further the personnel development of the participants in the field of didactics. Method: Each of the nine modules is made up of two classroom-based phases and one distance learning phase. The distance learning phase involves undertaking hospital-based projects on personnel and organisational development under academic supervision. The pilot phase participants were hospital doctors who, as part of their duties, hold leadership responsibility or are involved in the follow-on training of doctors. Results: The 17 participants successfully implemented more than 30 hospital-based projects during the distance learning phases of the nine modules. These projects included the development of medical specialty curricula, relevant didactic methods and evaluation design and were subsequently presented and subjected to reflection in interdisciplinary groups. The project presentation together with the project report were regarded as proof of competency. Conclusion: In addition to enhancing participant competency, the degree model described, which interlinks theory and practice, promotes organisational development through the implementation of projects undertaken under academic supervision. This has a double impact on the quality of medical follow-on training at the hospital where the participant is based, for not only is the individual's didactic competency enhanced, but so is the "learning organisation" as a whole as a result of continuous project orientation.

Information Management Utilizing Valued Information at the Right Time (VIRT) as Applied to a Joint Terminal Attack Controller (JTAC) Mission

DTIC Science & Technology

2008-03-01

technology in an effective way without taking a decade for implementation. 15. NUMBER OF PAGES 77 14. SUBJECT TERMS VIRT, Model Based... effective way without taking a decade for implementation. vi THIS PAGE INTENTIONALLY LEFT BLANK vii TABLE OF CONTENTS I. INTRODUCTION...To build the most effective force for 2020, we must be fully joint.”2 What does being fully joint mean and how does the DoD take advantage of

Longitudinal joint study.

DOT National Transportation Integrated Search

2001-09-01

In previous years there has been a problem with longitudinal joint : deterioration, due in part to poor construction techniques. : The degradation of the longitudinal joints has increased the cost of : maintaining these projects and caused unnecessar...

ISS Solar Array Alpha Rotary Joint (SARJ) Bearing Failure and Recovery: Technical and Project Management Lessons Learned

NASA Technical Reports Server (NTRS)

DellaCorte, Christopher; Krantz, Timothy L.; Dube, Michael J.

2011-01-01

The photovoltaic solar panels on the International Space Station (ISS) track the Sun through continuous rotating motion enabled by large bearings on the main truss called solar array alpha rotary joints (SARJs). In late 2007, shortly after installation, the starboard SARJ had become hard to turn and had to be shut down after exceeding drive current safety limits. The port SARJ, of the same design, had been working well for over 2 years. An exhaustive failure investigation ensued that included multiple extravehicular activities to collect information and samples for engineering forensics, detailed structural and thermal analyses, and a careful review of the build records. The ultimate root cause was determined to be kinematic design vulnerability coupled with inadequate lubrication, and manufacturing flaws; this was corroborated through ground tests, metallurgical studies, and modeling. A highly successful recovery plan was developed and implemented that included replacing worn and damaged components in orbit and applying space-compatible grease to improve lubrication. Beyond the technical aspects, however, lie several key programmatic lessons learned. These lessons, such as running ground tests to intentional failure to experimentally verify failure modes, are reviewed and discussed so they can be applied to future projects to avoid such problems.

Assessing the impact of DRGs on patient care and professional practice in Switzerland (IDoC) - a potential model for monitoring and evaluating healthcare reform.

PubMed

Wild, Verina; Carina, Fourie; Frouzakis, Regula; Clarinval, Caroline; Fässler, Margrit; Elger, Bernice; Gächter, Thomas; Leu, Agnes; Spirig, Rebecca; Kleinknecht, Michael; Radovanovic, Dragana; Mouton Dorey, Corine; Burnand, Bernard; Vader, John-Paul; Januel, Jean-Marie; Biller-Andorno, Nikola; The IDoC Group

2015-01-01

The starting point of the interdisciplinary project "Assessing the impact of diagnosis related groups (DRGs) on patient care and professional practice" (IDoC) was the lack of a systematic ethical assessment for the introduction of cost containment measures in healthcare. Our aim was to contribute to the methodological and empirical basis of such an assessment. Five sub-groups conducted separate but related research within the fields of biomedical ethics, law, nursing sciences and health services, applying a number of complementary methodological approaches. The individual research projects were framed within an overall ethical matrix. Workshops and bilateral meetings were held to identify and elaborate joint research themes. Four common, ethically relevant themes emerged in the results of the studies across sub-groups: (1.) the quality and safety of patient care, (2.) the state of professional practice of physicians and nurses, (3.) changes in incentives structure, (4.) vulnerable groups and access to healthcare services. Furthermore, much-needed data for future comparative research has been collected and some early insights into the potential impact of DRGs are outlined. Based on the joint results we developed preliminary recommendations related to conceptual analysis, methodological refinement, monitoring and implementation.

Integrated response toward HIV: a health promotion case study from China.

PubMed

Jiang, Zhen; Wang, Debin; Yang, Sen; Duan, Mingyue; Bu, Pengbin; Green, Andrew; Zhang, Xuejun

2011-06-01

Integrated HIV response refers to a formalized, collaborative process among organizations in communities with HIV at-risk populations. It is a both comprehensive and flexible scheme, which may include community-based environment promotion, skill coalition, fund linkage, human resource collaboration and service system jointly for both HIV prevention and control. It enables decisions and actions responds over time. In 1997, the Chinese government developed a 10-year HIV project supported by World Bank Loan (H9-HIV/AIDS/STIs). It was the first integrated STI/HIV intervention project in China and provides a unique opportunity to explore the long-term comprehensive STI/HIV intervention in a low-middle income country setting. Significant outcomes were identified as development and promotion of the national strategic plan and its ongoing implementation; positive knowledge, behavioral and STI/HIV prevalence rate change; and valuable experiences for managing integrated HIV/STI intervention projects. Essential factors for the success of the project and the key tasks for the next step were identified and included well-designed intervention in rural and low economic regions, unified program evaluation framework and real-time information collection and assessment.

Natural resource management and gender: reflections from watershed programmes in India.

PubMed

Shah, A

2000-01-01

This paper examines a watershed project in India which adheres to the fourth type of policy intervention that is within the gender, environment and development perspective. These policy interventions are projects for men and women, jointly, where the objectives are the improvement of the community as a whole or the economic growth of a state. It is noted that the existing approach in watershed development in the country lays special emphasis on vegetative measures for conservation of soil water as compared to the earlier emphasis on soil works and water harvesting structures. This approach is considered to be more beneficial environmentally as opposed to intensive agriculture. In the context of gender issues, although women's participation is emphasized in the implementation of the project, several limitations have been specified. In view of this, alternative approaches for ensuring sustainable livelihood and women's role within it are explored and recommended. Moreover, an analysis of the GED interface in the specific context of rain-fed farming in the western part of the country is included.

Using a student-faculty collaborative learning model to teach grant development in graduate nursing education.

PubMed

Falk, Nancy L; Phillips, Kathleen M; Hymer, Regina; Acquaviva, Kimberly D; Schumann, Mary Jean

2014-05-01

Graduate nurses are employed in clinical, research, educational, and policy roles. As leaders, they are expected to develop and sustain projects that support translating research to practice and policy. Funding to support initiatives is tight and requires innovative solutions to cover salaries, benefits, equipment purchases, and other program expenses. In an effort to teach grant writing while developing skilled leaders who are effective and competitive in securing funds, the George Washington University School of Nursing offers a graduate-level grant writing course. In the summer of 2011, a collaborative learning model was developed within the course. The joint approach was foundational to securing an Agency for Healthcare Research and Quality grant to support development and implementation of a patient engagement project by the Nursing Alliance for Quality Care. This article describes the project and offers hints for those seeking to develop a collaborative educational experience that affords new leadership skills for RNs from all backgrounds. Copyright 2014, SLACK Incorporated.

Benefits Analysis of Smart Grid Projects. White paper, 2014-2016

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marnay, Chris; Liu, Liping; Yu, JianCheng

Smart grids are rolling out internationally, with the United States (U.S.) nearing completion of a significant USD4-plus-billion federal program funded under the American Recovery and Reinvestment Act (ARRA-2009). The emergence of smart grids is widespread across developed countries. Multiple approaches to analyzing the benefits of smart grids have emerged. The goals of this white paper are to review these approaches and analyze examples of each to highlight their differences, advantages, and disadvantages. This work was conducted under the auspices of a joint U.S.-China research effort, the Climate Change Working Group (CCWG) Implementation Plan, Smart Grid. We present comparative benefits assessmentsmore » (BAs) of smart grid demonstrations in the U.S. and China along with a BA of a pilot project in Europe. In the U.S., we assess projects at two sites: (1) the University of California, Irvine campus (UCI), which consists of two distinct demonstrations: Southern California Edison’s (SCE) Irvine Smart Grid Demonstration Project (ISGD) and the UCI campus itself; and (2) the Navy Yard (TNY) area in Philadelphia, which has been repurposed as a mixed commercial-industrial, and possibly residential, development. In China, we cover several smart-grid aspects of the Sino-Singapore Tianjin Eco-city (TEC) and the Shenzhen Bay Technology and Ecology City (B-TEC). In Europe, we look at a BA of a pilot smart grid project in the Malagrotta area west of Rome, Italy, contributed by the Joint Research Centre (JRC) of the European Commission. The Irvine sub-project BAs use the U.S. Department of Energy (U.S. DOE) Smart Grid Computational Tool (SGCT), which is built on methods developed by the Electric Power Research Institute (EPRI). The TEC sub-project BAs apply Smart Grid Multi-Criteria Analysis (SG-MCA) developed by the State Grid Corporation of China (SGCC) based on the analytic hierarchy process (AHP) with fuzzy logic. The B-TEC and TNY sub-project BAs are evaluated using new approaches developed by those project teams. JRC has adopted an approach similar to EPRI’s but tailored to the Malagrotta distribution grid.« less

76 FR 3157 - Joint Operations Center Relocation Project, Sacramento County, CA

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-19

... Water Resources (DWR), the lead State agency, will prepare a joint EIS/EIR for the proposed Joint... following departments: DWR's Division of Operations and Maintenance, Operations Control Office, State Water...

Organizational-economic model of formation of socio-commercial multifunctional complex in the construction of high-rise buildings

NASA Astrophysics Data System (ADS)

Kirillova, Ariadna; Prytkova, Oksana O.

2018-03-01

The article is devoted to the features of the formation of the organizational and economic model of the construction of a socio-commercial multifunctional complex for high-rise construction. Authors have given examples of high-altitude multifunctional complexes in Moscow, analyzed the advantages and disadvantages in the implementation of multifunctional complexes, stressed the need for a holistic strategic approach, allowing to take into account the prospects for the development of the city and the creation of a comfortable living environment. Based on the analysis of multifunctional complexes features, a matrix of SWOT analysis was compiled. For the development of cities and improving the quality of life of the population, it is proposed to implement a new type of multifunctional complexes of a joint social and commercial direction, including, along with the implementation of office areas - schools, polyclinics, various sports facilities and cultural and leisure centers (theatrical, dance, studio, etc.). The approach proposed in the article for developing the model is based on a comparative evaluation of the multifunctional complex project of a social and commercial direction implemented at the expense of public-private partnership in the form of a concession agreement and a commercial multifunctional complex being built at the expense of the investor. It has been proved by calculations that the obtained indicators satisfy the conditions of expediency of the proposed organizational-economic model and the project of the social and commercial multifunctional complex is effective.

Experiences from a pilot study on how to conduct a qualitative multi-country research project regarding use of antibiotics in Southeast Europe.

PubMed

Kaae, Susanne; Sporrong, Sofia Kälvemark; Traulsen, Janine Morgall; Wallach Kildemoes, Helle; Nørgaard, Lotte Stig; Jakupi, Arianit; Raka, Denis; Gürpinar, Emre Umut; Alkan, Ali; Hoxha, Iris; Malaj, Admir; Cantarero, Lourdes Arevalo

2016-01-01

In 2014, a qualitative multi-country research project was launched to study the reasons behind the high use of antibiotics in regions of Southeast Europe by using previously untrained national interviewers (who were engaged in other antibiotic microbial resistance-related investigations) to conduct qualitative interviews with local patients, physicians and pharmacists. Little knowledge exists about how to implement qualitative multi-country research collaborations involving previously untrained local data collectors. The aim of this paper was therefore to contribute to the knowledge regarding how to conduct these types of research projects by evaluating a pilot study of the project. Local data collectors conducted the study according to a developed protocol and evaluated the study with the responsible researcher-team from University of Copenhagen. The pilot study focused on 'local ownership', 'research quality' and 'feasibility' with regard to successful implementation and evaluation. The evaluation was achieved by interpreting 'Skype' and 'face to face' meetings and email correspondence by applying 'critical common sense'. Local data collectors achieved a sense of joint ownership. Overall, the protocol worked well. Several minor challenges pertaining to research quality and feasibility were identified, in particular obtaining narratives when conducting interviews and recruiting patients for the study. Furthermore, local data collectors found it difficult to allocate sufficient time to the project. Solutions were discussed and added to the protocol. Despite the challenges, it was possible to achieve an acceptable scientific level of research when conducting qualitative multi-country research collaboration under the given circumstances. Specific recommendations to achieve this are provided by the authors.

[Results and recommendations for vocational rehabilitation from the development project RehaFutur].

PubMed

Riedel, H-P; Schmidt, C; Reinsberg, B; Klügel, T

2012-06-01

The overall project RehaFutur, which has been initiated and funded by the Federal Ministry of Labour and Social Affairs and which involves all the actors of the vocational rehabilitation system, is aimed at advancing the development of the vocational rehabilitation system, so as to prepare it for the challenges ahead. The project started with a group of scientific experts, who formulated 8 fields of action for further developing the vocational rehab system. On this basis, 4 working groups were set up in the framework of a development project to elaborate concrete recommendations on how to implement the necessary changes in vocational rehabilitation. The topics dealt with by the working groups were "self-determination and self-responsibility", "regulation of the overall process", "occupation and working environment" as well as "research". The process was supervised by a steering group, the results were moreover discussed in workshops. Recommendations have been made for 10 subject areas: "consultation and information", "joint service points", "use of the internet", "quality assurance", "individualisation and greater flexibility", "orientation towards the working environment", "participation of the beneficiaries", "research", "legislation", "cooperation of the actors". The next step of the RehaFutur overall project is implementation of those recommendations. This needs to be done in an interdisciplinary manner and conjointly by the agencies and providers involved, including the beneficiaries as experts. As different framework conditions have to be taken into account, the process is a complex one and needs to be supported by systematic research. © Georg Thieme Verlag KG Stuttgart · New York.

Challenges of Implementing a Communication-and-Resolution Program Where Multiple Organizations Must Cooperate.

PubMed

Mello, Michelle M; Armstrong, Sarah J; Greenberg, Yelena; McCotter, Patricia I; Gallagher, Thomas H

2016-12-01

To implement a communication-and-resolution program (CRP) in a setting in which liability insurers and health care facilities must collaborate to resolve incidents involving a facility and separately insured clinicians. Six hospitals and clinics and a liability insurer in Washington State. Sites designed and implemented CRPs and contributed information about cases and operational challenges over 20 months. Data were qualitatively analyzed. Data from interviews with personnel responsible for CRP implementation were triangulated with data on program cases collected by sites and notes recorded during meetings with sites and among project team members. Sites experienced small victories in resolving particular cases and streamlining some working relationships, but they were unable to successfully implement a collaborative CRP. Barriers included the insurer's distance from the point of care, passive rather than active support from top leaders, coordinating across departments and organizations, workload, nonparticipation by some physicians, and overcoming distrust. Operating CRPs where multiple organizations must collaborate can be highly challenging. Success likely requires several preconditions, including preexisting trust among organizations, active leadership engagement, physicians' commitment to participate, mechanisms for quickly transmitting information to insurers, tolerance for missteps, and clear protocols for joint investigations and resolutions. © Health Research and Educational Trust.

A Study of Longitudinal Joint Construction Techniques in HMA Pavements (Interim Report - Colorado Project)

DOT National Transportation Integrated Search

1996-02-01

There is a need to identify suitable longitudinal joint construction techniques for multilane hot mix asphalt (HMA) pavements, which can minimize or eliminate cracking at the joint and/or ravelling adjacent to the joint. It is believed that the longi...

Summary of the 2006 use of a notched wedge joint in Connecticut pilot projects : final report.

DOT National Transportation Integrated Search

2008-05-14

Performance of hot mix asphalt longitudinal joints has been an item of increasing scrutiny in Connecticut. The traditional butt joint has typically been the method used in Connecticut. These joints have been reportedly opening up creating a longitudi...

Balance rehabilitation: promoting the role of virtual reality in patients with diabetic peripheral neuropathy.

PubMed

Grewal, Gurtej S; Sayeed, Rashad; Schwenk, Michael; Bharara, Manish; Menzies, Robert; Talal, Talal K; Armstrong, David G; Najafi, Bijan

2013-01-01

Individuals with diabetic peripheral neuropathy frequently experience concomitant impaired proprioception and postural instability. Conventional exercise training has been demonstrated to be effective in improving balance but does not incorporate visual feedback targeting joint perception, which is an integral mechanism that helps compensate for impaired proprioception in diabetic peripheral neuropathy. This prospective cohort study recruited 29 participants (mean ± SD: age, 57 ± 10 years; body mass index [calculated as weight in kilograms divided by height in meters squared], 26.9 ± 3.1). Participants satisfying the inclusion criteria performed predefined ankle exercises through reaching tasks, with visual feedback from the ankle joint projected on a screen. Ankle motion in the mediolateral and anteroposterior directions was captured using wearable sensors attached to the participant's shank. Improvements in postural stability were quantified by measuring center of mass sway area and the reciprocal compensatory index before and after training using validated body-worn sensor technology. Findings revealed a significant reduction in center of mass sway after training (mean, 22%; P = .02). A higher postural stability deficit (high body sway) at baseline was associated with higher training gains in postural balance (reduction in center of mass sway) (r = -0.52, P < .05). In addition, significant improvement was observed in postural coordination between the ankle and hip joints (mean, 10.4%; P = .04). The present research implemented a novel balance rehabilitation strategy based on virtual reality technology. The method included wearable sensors and an interactive user interface for real-time visual feedback based on ankle joint motion, similar to a video gaming environment, for compensating impaired joint proprioception. These findings support that visual feedback generated from the ankle joint coupled with motor learning may be effective in improving postural stability in patients with diabetic peripheral neuropathy.

Implementation of the NEAMTWS in Portugal

NASA Astrophysics Data System (ADS)

Matias, L. M.; Annunziato, A.; Carrilho, F.; Baptista, M.

2008-12-01

In this paper we present the ongoing implementation of a national tsunami warning system in Portugal. After the Sumatra event in December 2004, the UNESCO, through its International Oceanographic Commission, recognized the need for an end to end global tsunami warning system and International Coordination Groups have been established for different areas around the globe: Indian, Caribbean, Atlantic and Mediterranean ocean basins. This system is the natural response to the historical and recent instrumental events generated along the western segment of the Eurasia and Nubian plates, which eastern end corresponds to the Gulf of Cadiz. The TWS includes three main components: the seismic detection, the tsunami detection and the issue of warnings/alerts. In Portugal the automatic earthquake processing is installed at IM (Instituto de Meteorologia) which is the only national institution operating on a 24x7 basis. This makes IM the natural candidate to host the Portuguese tsunami warning system. The TWS under implementation has several key points: definition of the tsunami scenarios, tsunami detection, and tsunami protocol messages. The system will also be able to predict tsunami potential impact along the coast, wave-heights and arrival times at pre-defined locations along the coast. In this study we present the recent results on definition of tsunami scenarios, establishment of the scenario database and the tsunami analysis tool. This work is a joint effort between Instituto de Meteorologia (Portugal), the Joint Research Center, JRC- ISPRA, Italy and the coordination of the Portuguese Group for the implementation of NEAMTWS in the area. This work has been financed by different European projects as NEAREST and TRANSFER, and also by the JRC, the IM and CGUL/IDL institutions.

Hood River and Pelton Ladder Evaluation Studies : Annual Report 1994.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olsen, Erik A.; French, Rod A.; Ritchey, Alan D.

1995-09-01

In 1992, the Northwest Power Planning Council approved the Hood River and Pelton ladder master plans within the framework of the Columbia River Basin Fish and Wildlife Program. The master plans define an approach for implementing a hatchery supplementation program in the Hood River subbasin. The hatchery program as defined in the master plans is called the Hood River Hatchery Production Program (HRPP). The HRPP will be phased in over several years and will be jointly implemented by the Oregon Department of Fish and Wildlife (ODFW) and the Confederated Tribes of the Warm Springs (CTWS) Reservation. In December 1991, amore » monitoring and evaluation program was implemented in the Hood River subbasin to collect life history and production information on stocks of anadromous salmonids returning to the Hood River subbasin. The program was implemented to provide the baseline information needed to: (1) evaluate various management options for implementing the HRPP and (2) determine any post-project impacts the HRPP has on indigenous populations of resident fish. Information collected during the 1992-94 fiscal years will also be used to prepare an environmental impact statement (EIS) evaluating the program`s impact on the human environment. To begin construction on project facilities, it was proposed that the HRPP be implemented in two phases. Phase I would include work that would fall under a {open_quotes}categorical exclusion{close_quotes} from NEPA, and Phase II would include work requiring an EIS prior to implementation. This report summarizes the life history and escapement data collected in the Hood River subbasin and the status work of implemented under Phase I of the HR Life history and escapement data will be used to: (1) test the assumptions on which harvest and escapement goals for the Hood River and Pelton ladder master plans are based and (2) develop biologically based management recommendations for implementing the HRPP.« less

Numerical built-in method for the nonlinear JRC/JCS model in rock joint.

PubMed

Liu, Qunyi; Xing, Wanli; Li, Ying

2014-01-01

The joint surface is widely distributed in the rock, thus leading to the nonlinear characteristics of rock mass strength and limiting the effectiveness of the linear model in reflecting characteristics. The JRC/JCS model is the nonlinear failure criterion and generally believed to describe the characteristics of joints better than other models. In order to develop the numerical program for JRC/JCS model, this paper established the relationship between the parameters of the JRC/JCS and Mohr-Coulomb models. Thereafter, the numerical implement method and implementation process of the JRC/JCS model were discussed and the reliability of the numerical method was verified by the shear tests of jointed rock mass. Finally, the effect of the JRC/JCS model parameters on the shear strength of the joint was analyzed.

Children of Chernobyl: A psycho-social empowerment project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kane, M.S.

The focus of this research has been to design and implement a social action project, using a Freirian Methodology for popular mental health among the victims of the 1986 Chernobyl nuclear meltown disaster living in Belarus. Although Chernobyl is in the Ukraine, only 35 kilometers from Kiev, 70% of the 50 million curies of radiation from the 1986 Chernobyl meltdown fell on the Republic of Belarus. This continues to directly affect 2.4 million of the total population of 10 million people. These people, 800,000 of whom are children, still live in the radiated zones. They live with the knowledge thatmore » the food, the water, and the ground are slowly poisoning them through continued and ongoing exposure to radiation. While there has been some significant research on the medical effects of the disaster in the Ukraine, much more research needs to be done in Belarus. Very little research or treatment has responded to the emotional, mental health and psychosocial impacts of the disaster on individuals, families and communities. Following the introduction to the problem, a rationale for a new paradigm in Mental Health Treatment is presented in a chapter titled Liberation Psychology'. This chapter integrates fields of psychology, psychotherapy, social work, education, and community organization from a Freirian perspective. The Social Action Project is outlined and described in specific detail. The Social Action Project has led to medical, computer and school supplies being sent to Belarus. Workshops and training have been designed and implemented. Texts and manuals have been translated and published. Further, there is documentation of a joint conceptualization and design of this Children of Chernobyl' project with signed letters of agreement and a report of a fact finding mission to Belaraus. The Social Action Project is then evaluated with Future Planning discussed in the conclusion.« less

A Partnership for Modeling the Marine Environment of Puget Sound, Washington

DTIC Science & Technology

2009-03-30

Northwest National Marine Renewable Energy Center, a joint University of Washington - Oregon State project funded by the U.S. Department of Energy. e. A... Marine Renewable Energy Center (NNMREC), a joint Washington - Oregon State project to investigate extraction of wave and tidal energy sponsored by

The transition to adulthood of young adults with IDD: Parents' joint projects.

PubMed

Young, Richard A; Marshall, Sheila K; Stainton, Tim; Wall, Jessie M; Curle, Deirdre; Zhu, Ma; Munro, David; Murray, John; El Bouhali, Asmae; Parada, Filomena; Zaidman-Zait, Anat

2018-03-01

Parents have found the transition to adulthood for their sons or daughters with intellectual and/or developmental disabilities (IDD) particularly challenging. The literature has not examined how parents work together and with others in face of this transition nor has it highlighted parental goals in this process. This study used a perspective based on joint, goal-direct action to describe the projects that Canadian parents engaged in together and with others relative to this transition. Using the qualitative action-project method, joint projects between parents and with others were identified from their conversations and followed for 6 months. Three groups of projects were described: equipping the young adult for adult life, connecting for personal support and managing day-to-day while planning for the future. Parents act together and with others relative to the transition to adulthood of their young adult children with IDD. These projects are complex and differ in goals, steps, resources and emotional regulation and motivation. © 2017 John Wiley & Sons Ltd.

Building healthy communities: establishing health and wellness metrics for use within the real estate industry.

PubMed

Trowbridge, Matthew J; Pickell, Sarah Gauche; Pyke, Christopher R; Jutte, Douglas P

2014-11-01

It is increasingly well recognized that the design and operation of the communities in which people live, work, learn, and play significantly influence their health. However, within the real estate industry, the health impacts of transportation, community development, and other construction projects, both positive and negative, continue to operate largely as economic externalities: unmeasured, unregulated, and for the most part unconsidered. This lack of transparency limits communities' ability to efficiently advocate for real estate investment that best promotes their health and well-being. It also limits market incentives for innovation within the real estate industry by making it more difficult for developers that successfully target health behaviors and outcomes in their projects to differentiate themselves competitively. In this article we outline the need for actionable, community-relevant, practical, and valuable metrics jointly developed by the health care and real estate sectors to better evaluate and optimize the "performance" of real estate development projects from a population health perspective. Potential templates for implementation, including the successful introduction of sustainability metrics by the green building movement, and preliminary data from selected case-study projects are also discussed. Project HOPE—The People-to-People Health Foundation, Inc.

China as an Evolving Metro-Agro-Plex (China-MAP)

NASA Technical Reports Server (NTRS)

Chameides, William L.; Bergin, M.; Carmichael, G.; Dickinson, R.; Giorgi, F.; Kiang, C. S.; Levy, H., II; Kasibhatla, P.; Mearns, L.; Ramaswamy, V.

2002-01-01

The one-year NASA-funded project was implemented to complete the analyses and model-simulations undertaken under the auspices of the 3-year research effort supported by NASA as an Interdisciplinary Earth System Science Investigation (IDS) entitled: China As An Evolving Metro-Agro-Plex (China-MAP). The primary goal of China-MAP was to assess the effects of economic development and the regional environmental changes it engenders upon agriculture in China. The project was carried out as part of the Sino-U.S. Science and Technology Protocol in the Atmospheric Sciences, an official government-to-government agreement that establishes the parameters for joint research projects between the two nations in the atmospheric sciences. The NASA-funded portion of the project focused on the development and application of a regional coupled climate/chemical transport model for East Asia (i.e., RegChem-CM). The funds provided under the subject 1-year project were used to: (1) complete specific investigations undertaken by the China-MAP Science Team using the Reg-Chem-CM expended; and (2) document the results of these and other China-MAP investigations in the peer-reviewed literature. A summary of these specific investigations in provided.

Ohio Route 50 joint sealant experiment : research implementation plan.

DOT National Transportation Integrated Search

2005-05-01

Research in the state of Wisconsin over the past forty years has found no noticeable difference in : performance between jointed concrete pavement (JCP) constructed with a sealed contraction joint and : JCP constructed with a single, narrow, unsealed...

Medical image analysis of knee joint lipoma arborescens and arthroscopic treatment.

PubMed

Zhu, Guangyu; Tian, Xiangdong; Du, Dongfeng; Lei, Ming; Guan, Lei; Wang, Jian; Tan, Yetong; Yang, Chen; Zheng, Xinxin

2018-06-01

Arthroscopy is a minimally invasive surgical procedure on a joint in which examination and treatment of knee damage is performed using a surgical device known as the arthroscope. Lipoma arborescens (LA), an infrequent intra-articular lesion, originates from mature adipose cells under subsynovial tissue. The synovial membrane is pale yellow with large villous projections. It is caused by various underlying factors. We found many patients with LA and processed them appropriately.The research was implemented to investigate therapeutic effect of semi-automated arthroscopic diagnosis and treatment for knee joint. We used the Stryker arthroscopic in surgery that is 4 mm in diameter with angle at 30°. Patients were chosen by biomechanical analysis and scanning mode. All of the patients underwent radiographic imaging examination, Magnetic Resonance Imaging (MRI), Lysholm Score and Visual Analogue Scale (VAS). Arthroscopic limited synovectomy was carried out on these patients. The wound of all patients healed up. The content of follow-up includes: chief complaints, range of motion of knee joint, Visual Analogue Scale (VAS) and Lysholm score. No swollen nor effusion of the infected knee was found in all patients during the follow-up. The postoperative symptom was markedly alleviated in fourteen patients and partially alleviated in one. All patients were satisfied with the therapeutic effect. We performed biomechanical analysis based on knee slight flexion and extension. Arthroscopy is an endoscope for the diagnosis and treatment of joint diseases. Semi-automated arthroscopic debridement is good for early and mid-term osteoarthritis with Lipoma arborescens. Copyright © 2018. Published by Elsevier Ltd.

e-Measures: insight into the challenges and opportunities of automating publicly reported quality measures

PubMed Central

Garrido, Terhilda; Kumar, Sudheen; Lekas, John; Lindberg, Mark; Kadiyala, Dhanyaja; Whippy, Alan; Crawford, Barbara; Weissberg, Jed

2014-01-01

Using electronic health records (EHR) to automate publicly reported quality measures is receiving increasing attention and is one of the promises of EHR implementation. Kaiser Permanente has fully or partly automated six of 13 the joint commission measure sets. We describe our experience with automation and the resulting time savings: a reduction by approximately 50% of abstractor time required for one measure set alone (surgical care improvement project). However, our experience illustrates the gap between the current and desired states of automated public quality reporting, which has important implications for measure developers, accrediting entities, EHR vendors, public/private payers, and government. PMID:23831833

International Summer Student Seminar (3S), from Idea to Realization

NASA Astrophysics Data System (ADS)

Karpik, A. P.; Peled, A.; Musikhin, L. A.; Deren, L.; Seredovich, V. A.

2012-08-01

The article gives a spotlight on a three universities (Moscow State University of Geodesy and Cartography, Siberian State Academy of Geodesy, Wuhan University) and ISPRS' cooperation in organizing and holding summer student seminars for undergraduate, master, and PhD students of the universities specializing in photogrammetry, remote sensing, GIS, aerial and space cartography. Principles of topics of the seminar selection, lecture courses delivering and practical training as well as international joint team work on projects and their defence are described. The description of the basic stages of 3S implementation, and the goals of this sort of the international event is given.

Getting the Best Value in a Source Selection

DTIC Science & Technology

2015-12-01

leadership, for both civilian and military program managers . Army COL James C. Mills relieved COL Gary D. Stephens as project manager for the...Precision Fires Rocket and Missile Systems (PFRMS) on July 15. COL William D. Jackson relieved COL Thomas H. Todd as project manager for Utility...Helicopters (UH) on July 15. COL Shane N. Fullmer relieved COL John Cavedo, Jr. as project manager for Joint Program Office, Joint Light Tactical Vehicles

AMUC: Associated Motion capture User Categories.

PubMed

Norman, Sally Jane; Lawson, Sian E M; Olivier, Patrick; Watson, Paul; Chan, Anita M-A; Dade-Robertson, Martyn; Dunphy, Paul; Green, Dave; Hiden, Hugo; Hook, Jonathan; Jackson, Daniel G

2009-07-13

The AMUC (Associated Motion capture User Categories) project consisted of building a prototype sketch retrieval client for exploring motion capture archives. High-dimensional datasets reflect the dynamic process of motion capture and comprise high-rate sampled data of a performer's joint angles; in response to multiple query criteria, these data can potentially yield different kinds of information. The AMUC prototype harnesses graphic input via an electronic tablet as a query mechanism, time and position signals obtained from the sketch being mapped to the properties of data streams stored in the motion capture repository. As well as proposing a pragmatic solution for exploring motion capture datasets, the project demonstrates the conceptual value of iterative prototyping in innovative interdisciplinary design. The AMUC team was composed of live performance practitioners and theorists conversant with a variety of movement techniques, bioengineers who recorded and processed motion data for integration into the retrieval tool, and computer scientists who designed and implemented the retrieval system and server architecture, scoped for Grid-based applications. Creative input on information system design and navigation, and digital image processing, underpinned implementation of the prototype, which has undergone preliminary trials with diverse users, allowing identification of rich potential development areas.

76 FR 23221 - Joint Public Roundtable on Issues Related to the Schedule for Implementing Final Rules for Swaps...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-26

... submissions will be reviewed jointly by the Agencies. All comments must be in English or be accompanied by an English translation. All submissions provided to either Agency in any electronic form or on paper will be... of CFTC Commissioner Scott D. O'Malia; Implementation Roundtable Seriatim; Certainty & Transparency I...

Online Monitoring Technical Basis and Analysis Framework for Large Power Transformers; Interim Report for FY 2012

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nancy J. Lybeck; Vivek Agarwal; Binh T. Pham

The Light Water Reactor Sustainability program at Idaho National Laboratory (INL) is actively conducting research to develop and demonstrate online monitoring (OLM) capabilities for active components in existing Nuclear Power Plants. A pilot project is currently underway to apply OLM to Generator Step-Up Transformers (GSUs) and Emergency Diesel Generators (EDGs). INL and the Electric Power Research Institute (EPRI) are working jointly to implement the pilot project. The EPRI Fleet-Wide Prognostic and Health Management (FW-PHM) Software Suite will be used to implement monitoring in conjunction with utility partners: the Shearon Harris Nuclear Generating Station (owned by Duke Energy for GSUs, andmore » Braidwood Generating Station (owned by Exelon Corporation) for EDGs. This report presents monitoring techniques, fault signatures, and diagnostic and prognostic models for GSUs. GSUs are main transformers that are directly connected to generators, stepping up the voltage from the generator output voltage to the highest transmission voltages for supplying electricity to the transmission grid. Technical experts from Shearon Harris are assisting INL and EPRI in identifying critical faults and defining fault signatures associated with each fault. The resulting diagnostic models will be implemented in the FW-PHM Software Suite and tested using data from Shearon-Harris. Parallel research on EDGs is being conducted, and will be reported in an interim report during the first quarter of fiscal year 2013.« less

Computers as Media for Communication: Learning and Development in a Whole Earth Context.

ERIC Educational Resources Information Center

Levin, James A.

Educationally successful electronic network activities involving microcomputers and long-distance networks include a student newswire, joint social science projects, and joint science projects. A newswire activity, such as "The Computer Chronicles," can provide a wide range of audiences for writing, a functional environment for reading, and a…

DRAFT One Year Extension of the Short-Term National Product Waiver for Stainless Steel Nuts and Bolts used in Pipe Couplings, Restraints, Joints, Flanges and Saddles for State Revolving Fund Projects

EPA Pesticide Factsheets

DRAFT one year extension of the short-term national product waiver for stainless steel nuts and bolts used in pipe couplings, restraints, joints, flanges and saddles for State Revolving Fund projects.

75 FR 14192 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Joint Venture...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-24

... Production Act of 1993--Joint Venture Under Tip Award No. 70NANB10H014 To Perform Project Entitled: Automated... Project Entitled: Automated Nondestructive Evaluation and Rehabilitation System (``ANDERS'') for Bridge... approaches or fragmented NDE, (2) comprehensive condition and structural assessment (including the...

User Requirements Based Development of a Web Portal for Chronic Patients.

PubMed

Kopanitsa, Georgy

2017-01-01

In the current study, we tried to identify practices that help overcoming data entering and operational barriers, and involve patients and doctors in the development process to improve the acceptance of Web portals for chronic patients. This paper presents a follow up project implementing a Web portal for chronic patients considering previously studied barriers and opportunities. The following methods were applied to facilitate the acceptance of the portal: 1) a joint use case definition and discussion session before starting the development; 2) involvement of the users in prototyping the portal; 3) training of doctors and patients together before the implementation. During the first week of the portal's operation we have measured the number of data transactions and the number of active users to compare it with previous experience. The first weeks of operating the portal, we could observe an active contribution of doctors and patients, who submitted vital signs data and recommendations to the portal.

Drinking water treatment for a rural karst region in Indonesia

NASA Astrophysics Data System (ADS)

Matthies, K.; Schott, C.; Anggraini, A. K.; Silva, A.; Diedel, R.; Mühlebach, H.; Fuchs, S.; Obst, U.; Brenner-Weiss, G.

2016-09-01

An interdisciplinary German-Indonesian joint research project on Integrated Water Resources Management (IWRM) focused on the development and exemplary implementation of adapted technologies to improve the water supply situation in a model karst region in southern Java. The project involving 19 sub-projects covers exploration of water resources, water extraction, distribution as well as water quality assurance, and waste water treatment. For the water quality assurance, an appropriate and sustainable drinking water treatment concept was developed and exemplarily implemented. Monitoring results showed that the main quality issue was the contamination with hygienically relevant bacteria. Based on the gained results, a water treatment concept was developed consisting of a central sand filtration prior to the distribution network, a semi-central hygienization where large water volumes are needed to remove bacteria deriving from water distribution and a final point-of-use water treatment. This paper focuses on the development of a central sand filtration plant and some first analysis for the development of a recipe for the local production of ceramic filters for household water treatment. The first results show that arsenic and manganese are leaching from the filters made of local raw material. Though discarding the first, filtrates should be sufficient to reduce arsenic and manganese concentration effectively. Moreover, hydraulic conductivities of filter pots made of 40 % pore-forming agents are presented and discussed.

Inflatable Habitat Health Monitoring: Implementation, Lessons Learned, and Application to Lunar or Martian Habitat Health Monitoring

NASA Technical Reports Server (NTRS)

Rojdev, Kristina; Hong, Todd; Hafermalz, Scott; Hunkins, Robert; Valle, Gerald; Toups, Larry

2009-01-01

NASA's exploration mission is to send humans to the Moon and Mars, in which the purpose is to learn how to live and work safely in those harsh environments. A critical aspect of living in an extreme environment is habitation, and within that habitation element there are key systems which monitor the habitation environment to provide a safe and comfortable living and working space for humans. Expandable habitats are one of the options currently being considered due to their potential mass and volume efficiencies. This paper discusses a joint project between the National Science Foundation (NSF), ILC Dover, and NASA in which an expandable habitat was deployed in the extreme environment of Antarctica to better understand the performance and operations over a one-year period. This project was conducted through the Innovative Partnership Program (IPP) where the NSF provided the location at McMurdo Station in Antarctica and support at the location, ILC Dover provided the inflatable habitat, and NASA provided the instrumentation and data system for monitoring the habitat. The outcome of this project provided lessons learned in the implementation of an inflatable habitat and the systems that support that habitat. These lessons learned will be used to improve current habitation capabilities and systems to meet the objectives of exploration missions to the moon and Mars.

46 CFR 385.38 - Joint funding.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 8 2012-10-01 2012-10-01 false Joint funding. 385.38 Section 385.38 Shipping MARITIME... AGREEMENTS REGULATIONS General Policies § 385.38 Joint funding. (a) Pursuant to section 10(c) of the Act, MarAd is authorized to participate in joint funded projects with other Federal agencies in any funding...

46 CFR 385.38 - Joint funding.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 8 2013-10-01 2013-10-01 false Joint funding. 385.38 Section 385.38 Shipping MARITIME... AGREEMENTS REGULATIONS General Policies § 385.38 Joint funding. (a) Pursuant to section 10(c) of the Act, MarAd is authorized to participate in joint funded projects with other Federal agencies in any funding...

46 CFR 385.38 - Joint funding.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 8 2014-10-01 2014-10-01 false Joint funding. 385.38 Section 385.38 Shipping MARITIME... AGREEMENTS REGULATIONS General Policies § 385.38 Joint funding. (a) Pursuant to section 10(c) of the Act, MarAd is authorized to participate in joint funded projects with other Federal agencies in any funding...

46 CFR 385.38 - Joint funding.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Joint funding. 385.38 Section 385.38 Shipping MARITIME... AGREEMENTS REGULATIONS General Policies § 385.38 Joint funding. (a) Pursuant to section 10(c) of the Act, MarAd is authorized to participate in joint funded projects with other Federal agencies in any funding...

46 CFR 385.38 - Joint funding.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 8 2011-10-01 2011-10-01 false Joint funding. 385.38 Section 385.38 Shipping MARITIME... AGREEMENTS REGULATIONS General Policies § 385.38 Joint funding. (a) Pursuant to section 10(c) of the Act, MarAd is authorized to participate in joint funded projects with other Federal agencies in any funding...

Hand-Eye Calibration of Robonaut

NASA Technical Reports Server (NTRS)

Nickels, Kevin; Huber, Eric

2004-01-01

NASA's Human Space Flight program depends heavily on Extra-Vehicular Activities (EVA's) performed by human astronauts. EVA is a high risk environment that requires extensive training and ground support. In collaboration with the Defense Advanced Research Projects Agency (DARPA), NASA is conducting a ground development project to produce a robotic astronaut's assistant, called Robonaut, that could help reduce human EVA time and workload. The project described in this paper designed and implemented a hand-eye calibration scheme for Robonaut, Unit A. The intent of this calibration scheme is to improve hand-eye coordination of the robot. The basic approach is to use kinematic and stereo vision measurements, namely the joint angles self-reported by the right arm and 3-D positions of a calibration fixture as measured by vision, to estimate the transformation from Robonaut's base coordinate system to its hand coordinate system and to its vision coordinate system. Two methods of gathering data sets have been developed, along with software to support each. In the first, the system observes the robotic arm and neck angles as the robot is operated under external control, and measures the 3-D position of a calibration fixture using Robonaut's stereo cameras, and logs these data. In the second, the system drives the arm and neck through a set of pre-recorded configurations, and data are again logged. Two variants of the calibration scheme have been developed. The full calibration scheme is a batch procedure that estimates all relevant kinematic parameters of the arm and neck of the robot The daily calibration scheme estimates only joint offsets for each rotational joint on the arm and neck, which are assumed to change from day to day. The schemes have been designed to be automatic and easy to use so that the robot can be fully recalibrated when needed such as after repair, upgrade, etc, and can be partially recalibrated after each power cycle. The scheme has been implemented on Robonaut Unit A and has been shown to reduce mismatch between kinematically derived positions and visually derived positions from a mean of 13.75cm using the previous calibration to means of 1.85cm using a full calibration and 2.02cm using a suboptimal but faster daily calibration. This improved calibration has already enabled the robot to more accurately reach for and grasp objects that it sees within its workspace. The system has been used to support an autonomous wrench-grasping experiment and significantly improved the workspace positioning of the hand based on visually derived wrench position. estimates.

Crossing boundaries in a collaborative modeling workspace

USGS Publications Warehouse

Morisette, Jeffrey T.; Cravens, Amanda; Miller, Brian W.; Talbert, Marian; Talbert, Colin; Jarnevich, Catherine S.; Fink, Michelle; Decker, Karin; Odell, Eric

2017-01-01

There is substantial literature on the importance of bridging across disciplinary and science–management boundaries. One of the ways commonly suggested to cross boundaries is for participants from both sides of the boundary to jointly produce information (i.e., knowledge co-production). But simply providing tools or bringing people together in the same room is not sufficient. Here we present a case study documenting the mechanisms by which managers and scientists collaborated to incorporate climate change projections into Colorado’s State Wildlife Action Plan. A critical component of the project was the use of a collaborative modeling and visualization workspace: the U.S. Geological Survey’s Resource for Advanced Modeling (RAM). Using video analysis and pre/post surveys from this case study, we examine how the RAM facilitated cognitive and social processes that co-produced a more salient and credible end product. This case provides practical suggestions to scientists and practitioners who want to implement actionable science.

Autonomous Flight Safety System Road Test

NASA Technical Reports Server (NTRS)

Simpson, James C.; Zoemer, Roger D.; Forney, Chris S.

2005-01-01

On February 3, 2005, Kennedy Space Center (KSC) conducted the first Autonomous Flight Safety System (AFSS) test on a moving vehicle -- a van driven around the KSC industrial area. A subset of the Phase III design was used consisting of a single computer, GPS receiver, and UPS antenna. The description and results of this road test are described in this report.AFSS is a joint KSC and Wallops Flight Facility project that is in its third phase of development. AFSS is an independent subsystem intended for use with Expendable Launch Vehicles that uses tracking data from redundant onboard sensors to autonomously make flight termination decisions using software-based rules implemented on redundant flight processors. The goals of this project are to increase capabilities by allowing launches from locations that do not have or cannot afford extensive ground-based range safety assets, to decrease range costs, and to decrease reaction time for special situations.

DOE/EPRI Electricity Storage Handbook in Collaboration with NRECA.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Akhil, Abbas Ali; Huff, Georgianne; Currier, Aileen B.

2015-02-01

The Electricity Storage Handbook (Handbook) is a how - to guide for utility and rural cooperative engineers, planners, and decision makers to plan and implement energy storage projects. The Handbook also serves as an information resource for investors and venture capitalists, providing the latest developments in technologies and tools to guide their evaluation s of energy storage opportunities. It includes a comprehensive database of the cost of current storage systems in a wide variety of electric utility and customer services, along with interconnection schematics. A list of significant past and present energy storage projects is provided for a practical perspectivemore » . This Handbook, jointly sponsored by the U.S. Department of Energy and the Electric Power Research Institute in collaboration with the National Rural Electric Cooperative Association, is published in electronic form at www.sandia.gov/ess. This Handbook is best viewed online.« less

OpenMDAO: Framework for Flexible Multidisciplinary Design, Analysis and Optimization Methods

NASA Technical Reports Server (NTRS)

Heath, Christopher M.; Gray, Justin S.

2012-01-01

The OpenMDAO project is underway at NASA to develop a framework which simplifies the implementation of state-of-the-art tools and methods for multidisciplinary design, analysis and optimization. Foremost, OpenMDAO has been designed to handle variable problem formulations, encourage reconfigurability, and promote model reuse. This work demonstrates the concept of iteration hierarchies in OpenMDAO to achieve a flexible environment for supporting advanced optimization methods which include adaptive sampling and surrogate modeling techniques. In this effort, two efficient global optimization methods were applied to solve a constrained, single-objective and constrained, multiobjective version of a joint aircraft/engine sizing problem. The aircraft model, NASA's nextgeneration advanced single-aisle civil transport, is being studied as part of the Subsonic Fixed Wing project to help meet simultaneous program goals for reduced fuel burn, emissions, and noise. This analysis serves as a realistic test problem to demonstrate the flexibility and reconfigurability offered by OpenMDAO.

Peculiarities of organization of project and research activity of students in computer science, physics and technology

NASA Astrophysics Data System (ADS)

Stolyarov, I. V.

2017-01-01

The author of this article manages a project and research activity of students in the areas of computer science, physics, engineering and biology, basing on the acquired experience in these fields. Pupils constantly become winners of competitions and conferences of different levels, for example, three of the finalists of Intel ISEF in 2013 in Phoenix (Arizona, USA) and in 2014 in Los Angeles (California, USA). In 2013 A. Makarychev received the "Small Nobel prize" in Computer Science section and special award sponsors - the company's CAST. Scientific themes and methods suggested by the author and developed in joint publications of students from Russia, Germany and Austria are the patents for invention and certificates for registration in the ROSPATENT. The article presents the results of the implementation of specific software and hardware systems in physics, engineering and medicine.

Environmental Land Management in Tajikistan

NASA Astrophysics Data System (ADS)

Makhmudov, Zafar; Ergashev, Murod

2015-04-01

Tackling Environmental Land Management in Tajikistan "Project approach" Khayrullo Ibodzoda, Zafar Mahmoudov, Murod Ergashev, Kamoliddin Abdulloev Among 28 countries in Europe and Central Asia, Tajikistan is estimated to be the most vulnerable to the climate change impacts depending on its high exposure and sensitivity combined with a very low adaptive capacity. The agricultural sector of Tajikistan is subject to lower and more erratic rainfalls, as well as dryness of water resources due to the possible temperature rising in the region, high evaporation, reducing the accumulation of snow in the mountain glaciers and increased frequency of extreme events. Climate change and variability are likely to pose certain risks, especially for those who prefer natural agriculture or pasture management that just reinforces the need for sound, adapted to new climatic conditions and improved principles of land management. Adoption of new strategies and best practices on sustainable land and water management for agricultural ecosystems will help the farmers and communities in addressing the abovementioned problems, adapt and become more resilient to changing climate by increasing wellbeing of local population, and contributing to food security and restoring productive natural resources. The Environmental Land Management and Rural Livelihoods Project is being financed by the Pilot Program for Climate Resilience (PPCR) and Global Environment Facility (GEF). The Project goal is to enable the rural population to increase their productive assets by improving management of natural resources and building resilience to climate change in selected climate vulnerable sites. The project will facilitate introduction of innovative measures on land use and agricultural production by providing small grants at the village level and grants for the Pasture User Groups (PUGs) at jamoat level in order to implement joint plans of pasture management and wellbred livestock, also for the Water User Associations (WUAs) to introduce sustainable on-farm water management practices. The Project comprises three components to be implemented in five years: 1. Rural Production and Land Resource Management Investments; 2. Knowledge Management and Institutional Support, and 3. Project Management and Coordination. These components include a set of grants from the PPCR and GEF that betrays the particular importance of the grant sources for the Project funding. This innovative combination of the PPCR and GEF grant funding will help in scheduling a scope of work under the Project and enable to implement certain activities on a pilot basis that otherwise could not be implemented at this level. Key partners are the Committee for Environmental Protection (Implementing Agency), the Ministry of Finance, the PPCR Secretariat in Tajikistan, Farkhor, Kulyab, Khovaling, Baljuvan, Tavildara and Jirgatal districts, the German Agency for International Development (GIZ) with its GREAT program which provides additional support to the community-based Project planning and institutional development, as well as technical agricultural advisory services. Currently the project has Project Implementation Group and most of its Facilitating Organizations in place that will carry out financial management, disbursements, procurement process, environmental management, social development, monitoring and evaluation. Workshops on coordinating the Project were held in the districts, as well as a series of Trainings of trainings and meetings were conducted for specialists and technical personnel. Next step is to initiate supporting local initiatives for climate adaptive land management and improved livelihoods based on Community Action Plans.

Model-based estimation for dynamic cardiac studies using ECT.

PubMed

Chiao, P C; Rogers, W L; Clinthorne, N H; Fessler, J A; Hero, A O

1994-01-01

The authors develop a strategy for joint estimation of physiological parameters and myocardial boundaries using ECT (emission computed tomography). They construct an observation model to relate parameters of interest to the projection data and to account for limited ECT system resolution and measurement noise. The authors then use a maximum likelihood (ML) estimator to jointly estimate all the parameters directly from the projection data without reconstruction of intermediate images. They also simulate myocardial perfusion studies based on a simplified heart model to evaluate the performance of the model-based joint ML estimator and compare this performance to the Cramer-Rao lower bound. Finally, the authors discuss model assumptions and potential uses of the joint estimation strategy.

Alberta: evaluation of nursing retention and recruitment programs.

PubMed

Weidner, Arlene; Graham, Carol; Smith, Jennifer; Aitken, Julia; Odell, Jill

2012-03-01

Retention and recruitment strategies are essential to address nursing workforce supply and ensure the viability of healthcare delivery in Canada. Knowledge transfer between experienced nurses and those new to the profession is also a focus for concern. The Multi-Employer/United Nurses of Alberta Joint Committee attempted to address these issues by introducing a number of retention and recruitment (R&R) initiatives for nurses in Alberta: in total, seven different programs that were introduced to some 24,000 nurses and employers across the province of Alberta in 2001 (the Transitional Graduate Nurse Recruitment Program) and 2007 (the remaining six R&R programs). Approximately 1,600 nurses participated in the seven programs between 2001 and 2009. Of the seven strategies, one supported entry into the workplace, two were pre-retirement strategies and four involved flexible work options. This project entailed a retrospective evaluation of the seven programs and differed from the other Research to Action (RTA) projects because it was solely concerned with evaluation of pre-existing initiatives. All seven programs were launched without a formal evaluation component, and the tracking of local uptake varied throughout the province. The union and various employers faced challenges in implementing these strategies in a timely fashion, as most were designed at the bargaining table during negotiations. As a result, systems, policy and procedural changes had to be developed to support their implementation after they became available.Participants in the programs indicated improvements over time in several areas, including higher levels of satisfaction with work–life balance, hours worked and their current practice and profession. The evaluation found that participation led to perceived improvements in nurses' confidence, greater control over their work environment, decreased stress levels, increased energy and morale and perceived improved ability to provide high-quality care. However, no formal implementation plan had been developed or made available to assist employers with implementation of the programs. The findings highlight the need for more discipline in communicating, implementing and evaluating initiatives such as those evaluated retrospectively in this project. In particular, key performance indicators, baseline data, monitoring mechanisms and an evaluation plan need to be developed prior to implementation.

Determination of Parachute Joint Factors using Seam and Joint Testing

NASA Technical Reports Server (NTRS)

Mollmann, Catherine

2015-01-01

This paper details the methodology for determining the joint factor for all parachute components. This method has been successfully implemented on the Capsule Parachute Assembly System (CPAS) for the NASA Orion crew module for use in determining the margin of safety for each component under peak loads. Also discussed are concepts behind the joint factor and what drives the loss of material strength at joints. The joint factor is defined as a "loss in joint strength...relative to the basic material strength" that occurs when "textiles are connected to each other or to metals." During the CPAS engineering development phase, a conservative joint factor of 0.80 was assumed for each parachute component. In order to refine this factor and eliminate excess conservatism, a seam and joint testing program was implemented as part of the structural validation. This method split each of the parachute structural joints into discrete tensile tests designed to duplicate the loading of each joint. Breaking strength data collected from destructive pull testing was then used to calculate the joint factor in the form of an efficiency. Joint efficiency is the percentage of the base material strength that remains after degradation due to sewing or interaction with other components; it is used interchangeably with joint factor in this paper. Parachute materials vary in type-mainly cord, tape, webbing, and cloth -which require different test fixtures and joint sample construction methods. This paper defines guidelines for designing and testing samples based on materials and test goals. Using the test methodology and analysis approach detailed in this paper, the minimum joint factor for each parachute component can be formulated. The joint factors can then be used to calculate the design factor and margin of safety for that component, a critical part of the design verification process.

Cost Allocation of Multiagency Water Resource Projects: Game Theoretic Approaches and Case Study

NASA Astrophysics Data System (ADS)

Lejano, Raul P.; Davos, Climis A.

1995-05-01

Water resource projects are often jointly carried out by a number of communities and agencies. Participation in a joint project depends on how costs are allocated among the participants and how cost shares compare with the cost of independent projects. Cooperative N-person game theory offers approaches which yield cost allocations that satisfy rationality conditions favoring participation. A new solution concept, the normalized nucleolus, is discussed and applied to a water reuse project in southern California. Results obtained with the normalized nucleolus are compared with those derived with more traditional solution concepts, namely, the nucleolus and the Shapley value.

Neural joint control for Space Shuttle Remote Manipulator System

NASA Technical Reports Server (NTRS)

Atkins, Mark A.; Cox, Chadwick J.; Lothers, Michael D.; Pap, Robert M.; Thomas, Charles R.

1992-01-01

Neural networks are being used to control a robot arm in a telerobotic operation. The concept uses neural networks for both joint and inverse kinematics in a robotic control application. An upper level neural network is trained to learn inverse kinematic mappings. The output, a trajectory, is then fed to the Decentralized Adaptive Joint Controllers. This neural network implementation has shown that the controlled arm recovers from unexpected payload changes while following the reference trajectory. The neural network-based decentralized joint controller is faster, more robust and efficient than conventional approaches. Implementations of this architecture are discussed that would relax assumptions about dynamics, obstacles, and heavy loads. This system is being developed to use with the Space Shuttle Remote Manipulator System.

76 FR 65746 - Notice of Availability of Joint Final Environmental Impact Statement/Final Environmental Impact...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-24

... Boulevard. The project will consist of up to 128 wind turbines (1.5 to 3.0 MW each) with a generating... Statement/Final Environmental Impact Report for the Tule Wind Project, California, and Notice of Intent To... Final Environmental Impact Report (EIR) as a joint environmental analysis document for Tule Wind, LLC's...

Program Validation: Four Case Studies. A Brief Report on Four Projects and Their Experiences Before the Joint Dissemination Review Panel.

ERIC Educational Resources Information Center

Taylor, Nancy, Ed.

In an effort to clearly illustrate the most effective approach when seeking Joint Dissemination Review Panel (JDRP) validation, this report describes four different educational programs. A program involving prekindergarten special students, and a project entailing a systems approach for disadvantaged elementary school students, were awarded…

Integrated Approaches to Testing and Assessment Under ...

EPA Pesticide Factsheets

Presentation on IATA case study for phenols which is joint project with Health Canada and NCCT, presented at the OECD IATA Case Study Meeting No. 2 in Paris, France. Presentation on IATA case study for phenols which is joint project with Health Canada and NCCT, presented at the OECD IATA Case Study Meeting No. 2 in Paris, France.

What a Joint. Youth Training Scheme. Core Exemplar Work Based Project.

ERIC Educational Resources Information Center

Further Education Staff Coll., Blagdon (England).

This trainer's guide is intended to assist supervisors of work-based career training projects in helping students become familiar with meat processing--livestock at the stockyards, meat packers (wholesalers), and butcher shops--to the cooked state and to become familiar with the different joints (cuts or parts) of beef, lamb, and pork. The guide…

Virtual Breakthrough Series, Part 2: Improving Fall Prevention Practices in the Veterans Health Administration.

PubMed

Zubkoff, Lisa; Neily, Julia; Quigley, Pat; Soncrant, Christina; Young-Xu, Yinong; Boar, Shoshana; Mills, Peter D

2016-11-01

The Veterans Health Administration (VHA) implemented a Virtual Breakthrough Series (VBTS) collaborative to help prevent falls and fall-related injuries. This project enabled teams to expand program infrastructure, redesign improvement strategies, and enhance program evaluation. A VBTS collaborative involves prework, action, and continuous improvement. Actions included educational calls, monthly reports, coaching, and feedback. Evaluation included assessment of interventions, team capacity and infrastructure changes, and rates of falls and fall-related major injuries. Fifty-nine teams completed the project. The majority submitted monthly reports. The average number of interventions per team was 6.66 (range, 1-12; mode = 6). The most frequently implemented changes were staff education; post-fall huddles; data tracking; and classifying falls, handoff communication, and intentional rounding. On a program questionnaire aggregated average summary scores improved from 136.54 (baseline) to 58.26 (follow-up; range, 0-189; p < 0.0001). The mean aggregated fall-related major injury rate for participants decreased from 6.8 to 4.8 per 100,000 bed-days of care (p = 0.02), or 5 major injuries avoided per month. No statistically significant changes occurred for nonparticipants. The mean aggregated fall rate did not change significantly from baseline to follow-up for participants (p = 0.42) or nonparticipants (p = 0.21). Teams submitted reports and implemented changes resulting in decreased major injuries related to falls for participating units. Teams also made changes in their fall prevention programs such as classifying how they analyze falls and implementing injury reduction strategies. The approaches used show promise for reducing fall-related harm for inpatients, as well as assisting teams in implementing changes. Copyright 2016 The Joint Commission.

Application of Delphi expert panel in joint venture projects

NASA Astrophysics Data System (ADS)

Adnan, H.; Rosman, M. R.; Rashid, Z. Z. Ahmad; Mohamad Yusuwan, N.; Bakhary, N. A.

2018-02-01

This study was conducted with the aim to identify the application of the Delphi Technique in validating findings obtained from questionnaire surveys and interviews done in- depth on the subject of joint venture projects in Malaysia. The Delphi technique aims to achieve a consensus of opinion amongst expert panellist that were selected on the primary factors in JV projects. To achieve research objectives, a progressive series of questions was designed where a selected panel of expert to confirm and validate the final findings. The rationale, benefits, limitations and recommendations for the use of Delphi were given in this study. From the literature review done, twenty-one factors were identified as critical factors to the making any joint venture project successful. Detail information from contractors were obtained by using the questionnaire survey method and forty-three in-depth interviews were carried out. Trust between partners, mutual understanding, partner selection criteria, agreement of contract, objective compatibility, conflict, and commitment were confirmed by the Delphi panel to be the critical success factors besides another fourteen factors which were found to be the Failure Reduction Criteria. Delphi techniques has proven to successfully assist in recognising the main factors and would be beneficial in supplementing the success of joint venture arrangements application for construction projects in Malaysia.

Comparative Study of 3-Dimensional Woven Joint Architectures for Composite Spacecraft Structures

NASA Technical Reports Server (NTRS)

Jones, Justin S.; Polis, Daniel L.; Segal, Kenneth N.

2011-01-01

The National Aeronautics and Space Administration (NASA) Exploration Systems Mission Directorate initiated an Advanced Composite Technology (ACT) Project through the Exploration Technology Development Program in order to support the polymer composite needs for future heavy lift launch architectures. As an example, the large composite structural applications on Ares V inspired the evaluation of advanced joining technologies, specifically 3D woven composite joints, which could be applied to traditionally manufactured barrel segments. Implementation of these 3D woven joint technologies may offer enhancements in damage tolerance without sacrificing weight. However, baseline mechanical performance data is needed to properly analyze the joint stresses and subsequently design/down-select a preform architecture. Six different configurations were designed and prepared for this study; each consisting of a different combination of warp/fill fiber volume ratio and preform interlocking method (z-fiber, fully interlocked, or hybrid). Tensile testing was performed for this study with the enhancement of a dual camera Digital Image Correlation (DIC) system which provides the capability to measure full-field strains and three dimensional displacements of objects under load. As expected, the ratio of warp/fill fiber has a direct influence on strength and modulus, with higher values measured in the direction of higher fiber volume bias. When comparing the z-fiber weave to a fully interlocked weave with comparable fiber bias, the z-fiber weave demonstrated the best performance in two different comparisons. We report the measured tensile strengths and moduli for test coupons from the 6 different weave configurations under study.

Implementing interorganizational cooperation in labour market reintegration: a case study.

PubMed

Ståhl, Christian

2012-06-01

To bring people with complex medical, social and vocational needs back to the labour market, interorganizational cooperation is often needed. Yet, studies of processes and strategies for achieving sustainable interorganizational cooperation are sparse. The aim of this study was to analyse the implementation processes of Swedish legislation on financial coordination, with specific focus on different strategies for and perspectives on implementing interorganizational cooperation. A multiple-case study was used, where two local associations for financial coordination were studied in order to elucidate and compare the development of cooperative work in two settings. The material, collected during a 3-year period, consisted of documents, individual interviews with managers, and focus groups with officials. Two different implementation strategies were identified. In case 1, a linear strategy was used to implement cooperative projects, which led to difficulties in maintaining cooperative work forms due to a fragmented and time-limited implementation process. In case 2, an interactive strategy was used, where managers and politicians were continuously involved in developing a central cooperation team that became a central part of a developing structure for interorganizational cooperation. An interactive cooperation strategy with long-term joint financing was here shown to be successful in overcoming organizational barriers to cooperation. It is suggested that a strategy based on adaptation to local conditions, flexibility and constant evaluation is preferred for developing sustainable interorganizational cooperation when implementing policies or legislation affecting interorganizational relationships.

Enabling Automated Graph-based Search for the Identification and Characterization of Mesoscale Convective Complexes in Satellite Datasets through Integration with the Apache Open Climate Workbench

NASA Astrophysics Data System (ADS)

McGibbney, L. J.; Whitehall, K. D.; Mattmann, C. A.; Goodale, C. E.; Joyce, M.; Ramirez, P.; Zimdars, P.

2014-12-01

We detail how Apache Open Climate Workbench (OCW) (recently open sourced by NASA JPL) was adapted to facilitate an ongoing study of Mesoscale Convective Complexes (MCCs) in West Africa and their contributions within the weather-climate continuum as it relates to climate variability. More than 400 MCCs occur annually over various locations on the globe. In West Africa, approximately one-fifth of that total occur during the summer months (June-November) alone and are estimated to contribute more than 50% of the seasonal rainfall amounts. Furthermore, in general the non-discriminatory socio-economic geospatial distribution of these features correlates with currently and projected densely populated locations. As such, the convective nature of MCCs raises questions regarding their seasonal variability and frequency in current and future climates, amongst others. However, in spite of the formal observation criteria of these features in 1980, these questions have remained comprehensively unanswered because of the untimely and subjective methods for identifying and characterizing MCCs due to limitations data-handling limitations. The main outcome of this work therefore documents how a graph-based search algorithm was implemented on top of the OCW stack with the ultimate goal of improving fully automated end-to-end identification and characterization of MCCs in high resolution observational datasets. Apache OCW as an open source project was demonstrated from inception and we display how it was again utilized to advance understanding and knowledge within the above domain. The project was born out of refactored code donated by NASA JPL from the Earth science community's Regional Climate Model Evaluation System (RCMES), a joint project between the Joint Institute for Regional Earth System Science and Engineering (JIFRESSE), and a scientific collaboration between the University of California at Los Angeles (UCLA) and NASA JPL. The Apache OCW project was then integrated back into the donor code with the aim of more efficiently powering that project. Notwithstanding, the object-oriented approach to creating a core set of libraries Apache OCW has scaled the usability of the project beyond climate model evaluation as displayed in the MCC use case detailed herewith.

A Modelling Method of Bolt Joints Based on Basic Characteristic Parameters of Joint Surfaces

NASA Astrophysics Data System (ADS)

Yuansheng, Li; Guangpeng, Zhang; Zhen, Zhang; Ping, Wang

2018-02-01

Bolt joints are common in machine tools and have a direct impact on the overall performance of the tools. Therefore, the understanding of bolt joint characteristics is essential for improving machine design and assembly. Firstly, According to the experimental data obtained from the experiment, the stiffness curve formula was fitted. Secondly, a finite element model of unit bolt joints such as bolt flange joints, bolt head joints, and thread joints was constructed, and lastly the stiffness parameters of joint surfaces were implemented in the model by the secondary development of ABAQUS. The finite element model of the bolt joint established by this method can simulate the contact state very well.

["Practical clinical competence" - a joint programme to improve training in surgery].

PubMed

Ruesseler, M; Schill, A; Stibane, T; Damanakis, A; Schleicher, I; Menzler, S; Braunbeck, A; Walcher, F

2013-12-01

Practical clinical competence is, as a result of the complexity of the required skills and the immediate consequences of their insufficient mastery, fundamentally important for undergraduate medical education. However, in the daily clinical routine, undergraduate training competes with patient care and experimental research, mostly to the disadvantage of the training of clinical skills and competencies. All students have to spend long periods in compulsory surgical training courses during their undergraduate studies. Thus, surgical undergraduate training is predestined to exemplarily develop, analyse and implement a training concept comprising defined learning objectives, elaborated teaching materials, analysed teaching methods, as well as objective and reliable assessment methods. The aim of this project is to improve and strengthen undergraduate training in practical clinical skills and competencies. The project is funded by the German Federal Ministry of Education and Research with almost two million Euro as a joint research project of the medical faculties of the universities of Frankfurt/Main, Gießen and Marburg, in collaboration with the German Society of Surgery, the German Society of Medical Education and the German Medical Students' Association. Nine packages in three pillars are combined in order to improve undergraduate medical training on a methodical, didactic and curricular level in a nation-wide network. Each partner of this network provides a systematic contribution to the project based on individual experience and competence. Based on the learning objectives, which were defined by the working group "Education" of the German Society of Surgery, teaching contents will be analysed with respect to their quality and will be available for both teachers and students as mobile learning tool (first pillar). The existing surgical curricula at the cooperating medical faculties will be analysed and teaching methods as well as assessment methods for clinical skills will be evaluated regarding their methodological quality and evidence. The existing surgical curricula will be revised and adapted on the basis of these results (second pillar). Qualification programmes for physicians will be implemented in order to improve both undergraduate education and the attractiveness of educational research, the required teaching quality will be imparted in a nationwide "train-the-teacher" program for surgical clinical skills (third pillar). Georg Thieme Verlag KG Stuttgart · New York.

Conclusions from the investigation of deterioration of joints in concrete pavements : intrans project reports.

DOT National Transportation Integrated Search

2016-02-01

Premature deterioration of concrete at the joints in concrete pavements and parking lots has been reported across the northern : states. The distress may first appear as shadowing when microcracking near the joints traps water, or as cracks parallel ...

Lessons learned about coordinating academic partnerships from an international network for health education.

PubMed

Luo, Airong; Omollo, Kathleen Ludewig

2013-11-01

There is a growing trend of academic partnerships between U.S., Canadian, and European health science institutions and academic health centers in low- and middle-income countries. These partnerships often encounter challenges such as resource disparities and power differentials, which affect the motivations, expectations, balance of benefits, and results of the joint projects. Little has been discussed in previous literature regarding the communication and project management processes that affect the success of such partnerships. To fill the gap in the literature, the authors present lessons learned from the African Health Open Educational Resources Network, a multicountry, multiorganizational partnership established in May 2008. The authors introduce the history of the network, then discuss actively engaging stakeholders throughout the project's life cycle (design, planning, execution, and closure) through professional development, relationship building, and assessment activities. They focus on communication and management practices used to identify mutually beneficial project goals, ensure timely completion of deliverables, and develop sustainable sociotechnical infrastructure for future collaborative projects. These activities yielded an interactive process of action, assessment, and reflection to ensure that project goals and values were aligned with implementation. The authors conclude with a discussion of lessons learned and how the partnership project may serve as a model for other universities and academic health centers in high-income countries and low- and middle-income countries that are interested in or currently pursuing international academic partnerships.

A vision-based end-point control for a two-link flexible manipulator. M.S. Thesis

NASA Technical Reports Server (NTRS)

Obergfell, Klaus

1991-01-01

The measurement and control of the end-effector position of a large two-link flexible manipulator are investigated. The system implementation is described and an initial algorithm for static end-point positioning is discussed. Most existing robots are controlled through independent joint controllers, while the end-effector position is estimated from the joint positions using a kinematic relation. End-point position feedback can be used to compensate for uncertainty and structural deflections. Such feedback is especially important for flexible robots. Computer vision is utilized to obtain end-point position measurements. A look-and-move control structure alleviates the disadvantages of the slow and variable computer vision sampling frequency. This control structure consists of an inner joint-based loop and an outer vision-based loop. A static positioning algorithm was implemented and experimentally verified. This algorithm utilizes the manipulator Jacobian to transform a tip position error to a joint error. The joint error is then used to give a new reference input to the joint controller. The convergence of the algorithm is demonstrated experimentally under payload variation. A Landmark Tracking System (Dickerson, et al 1990) is used for vision-based end-point measurements. This system was modified and tested. A real-time control system was implemented on a PC and interfaced with the vision system and the robot.

Air-Sea Battle through Joint Training: Power Projection Sustainability

DTIC Science & Technology

2014-05-15

9 generate our decisive advantage.” 39 An example of cross-domain operations employed by the USN and USAF was the release of an AGM-154C Joint...and Herzegovina. While employing a USAF GBU -15 “electro-optically guided” bomb within close range of a USN AGM-84 SLAM-ER, “electronic... 39 U.S. Office of the Chairman, Joint Chiefs of Staff. Capstone Concept for Joint Operations: Joint Force 2020

Model-based estimation for dynamic cardiac studies using ECT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chiao, P.C.; Rogers, W.L.; Clinthorne, N.H.

1994-06-01

In this paper, the authors develop a strategy for joint estimation of physiological parameters and myocardial boundaries using ECT (Emission Computed Tomography). The authors construct an observation model to relate parameters of interest to the projection data and to account for limited ECT system resolution and measurement noise. The authors then use a maximum likelihood (ML) estimator to jointly estimate all the parameters directly from the projection data without reconstruction of intermediate images. The authors also simulate myocardial perfusion studies based on a simplified heart model to evaluate the performance of the model-based joint ML estimator and compare this performancemore » to the Cramer-Rao lower bound. Finally, model assumptions and potential uses of the joint estimation strategy are discussed.« less

Planning and implementing forest operations to achieve sustainable forests: Proceedings of papers presented at the joint meeting of the Council on Forest Engineering and International Union of Forest Research Organizations.

Treesearch

Charles R. Blinn; Michael A. Thompson

1996-01-01

Contains a variety of papers presented at the joint meeting of the Council on Forest Engineering and International Union of Forest Research Organizations Subject Group S3.04 and that support the meeting theme "Planning and Implementing Forest Operations to Achieve Sustainable Forests."

Joint ETV/NOWATECH test plan for the Sorbisense GSW40 passive sampler

EPA Science Inventory

The joint test plan is the implementation of a test design developed for verification of the performance of an environmental technology following the NOWATECH ETV method. The verification is a joint verification with the US EPA ETV scheme and the Advanced Monitoring Systems Cent...

RSRM Nozzle-to-Case Joint J-leg Development

NASA Technical Reports Server (NTRS)

Albrechtsen, Kevin U.; Eddy, Norman F.; Ewing, Mark E.; McGuire, John R.

2003-01-01

Since the beginning of the Space Shuttle Reusable Solid Rocket Motor (RSRM) program, nozzle-to-case joint polysulfide adhesive gas paths have occurred on several flight motors. These gas paths have allowed hot motor gases to reach the wiper O-ring. Even though these motors continue to fly safely with this condition, a desire was to reduce such occurrences. The RSRM currently uses a J-leg joint configuration on case field joints and igniter inner and outer joints. The J-leg joint configuration has been successfully demonstrated on numerous RSRM flight and static test motors, eliminating hot gas intrusion to the critical O-ring seals on these joints. Using the proven technology demonstrated on the case field joints and igniter joints, a nozzle-to-case joint J-leg design was developed for implementation on RSRM flight motors. This configuration provides an interference fit with nozzle fixed housing phenolics at assembly, with a series of pressurization gaps incorporated outboard of the joint mating surface to aid in joint pressurization and to eliminate any circumferential flow in this region. The joint insulation is bonded to the nozzle phenolics using the same pressure sensitive adhesive used in the case field joints and igniter joints. An enhancement to the nozzle-to-case joint J-leg configuration is the implementation of a carbon rope thermal barrier. The thermal barrier is located downstream of the joint bondline and is positioned within the joint in a manner where any hot gas intrusion into the joint passes through the thermal barrier, reducing gas temperatures to a level that would not affect O-rings downstream of the thermal barrier. This paper discusses the processes used in reaching a final nozzle-to-case joint J-leg design, provides structural and thermal results in support of the design, and identifies fabrication techniques and demonstrations used in arriving at the final configuration.

GEOCAB Portal: A gateway for discovering and accessing capacity building resources in Earth Observation

NASA Astrophysics Data System (ADS)

Desconnets, Jean-Christophe; Giuliani, Gregory; Guigoz, Yaniss; Lacroix, Pierre; Mlisa, Andiswa; Noort, Mark; Ray, Nicolas; Searby, Nancy D.

2017-02-01

The discovery of and access to capacity building resources are often essential to conduct environmental projects based on Earth Observation (EO) resources, whether they are Earth Observation products, methodological tools, techniques, organizations that impart training in these techniques or even projects that have shown practical achievements. Recognizing this opportunity and need, the European Commission through two FP7 projects jointly with the Group on Earth Observations (GEO) teamed up with the Committee on Earth observation Satellites (CEOS). The Global Earth Observation CApacity Building (GEOCAB) portal aims at compiling all current capacity building efforts on the use of EO data for societal benefits into an easily updateable and user-friendly portal. GEOCAB offers a faceted search to improve user discovery experience with a fully interactive world map with all inventoried projects and activities. This paper focuses on the conceptual framework used to implement the underlying platform. An ISO19115 metadata model associated with a terminological repository are the core elements that provide a semantic search application and an interoperable discovery service. The organization and the contribution of different user communities to ensure the management and the update of the content of GEOCAB are addressed.

Collaborative dissemination and exploitation of research infrastructures and their products within COOP+

NASA Astrophysics Data System (ADS)

Järvi, L.; Asmi, A.; Bonet-García, F.; Suárez-Muñoz, M.

2016-12-01

COOP+ is a recently started European level project (EU Horizon 2020 Coordination and Support Action) that promotes cooperation between European research infrastructures (RIs) and their global counterparts to address global environmental challenges with emphasis on marine science, arctic research and biodiversity (see www.coop-plus.eu). As part of the project, the purpose is to understand and position the relevant ESFRI RIs (EMSO, EISCAT, ICOS and LifeWatch jointly with other European RIs) as a clear reference to the main stakeholders, and examine the best practices in how different RI products could be best exploited by different actors varying from research communities to stakeholders and SMEs (Small and Medium Enterprises). A relevant question is that what collaboration approaches could be implemented to foster the cooperation among RIs and to disseminate their products and services to researchers, policy makers, SMEs and citizens? Within the project, a valued map describing the different global and local actors and their connections with optimal approaches will be developed and updated along the project span (March 2016 - September 2018). The map includes both cooperation of global RIs and their connections to researchers, industry and stakeholders.

The Moquah Barrens Research Natural Area: Loss of a pine barrens ecosystem

USGS Publications Warehouse

Ribic, Christine

2017-01-01

The Moquah Barrens Research Natural Area (RNA) was established by the Chequamegon National Forest and the Lakes States Forest Experiment Station in 1935 with a research objective well-suited to the needs of the Forest Service and the scientific understanding of ecosystem function prevalent at the time of establishment. The original research plan was never implemented, which led to a joint Forest-Station decision in 1956 to disestablish the RNA. However, that decision was never implemented. A series of management decisions made after 1956 led to the loss of the pine barrens ecosystem originally encompassed by the RNA. This loss is not irretrievable and the work necessary to recover the original ecosystem is possible under existing RNA management guidelines. The experience of the Moquah Barrens RNA can be used by the Forest Service to improve overall management of the entire system of research natural areas. Two main areas of opportunity are identified: 1) implement an improved approach to managing official records associated with RNAs; and 2) adopt a management framework suitable for long-term ecological projects.

Virtual Passive Controller for Robot Systems Using Joint Torque Sensors

NASA Technical Reports Server (NTRS)

Aldridge, Hal A.; Juang, Jer-Nan

1997-01-01

This paper presents a control method based on virtual passive dynamic control that will stabilize a robot manipulator using joint torque sensors and a simple joint model. The method does not require joint position or velocity feedback for stabilization. The proposed control method is stable in the sense of Lyaponov. The control method was implemented on several joints of a laboratory robot. The controller showed good stability robustness to system parameter error and to the exclusion of nonlinear dynamic effects on the joints. The controller enhanced position tracking performance and, in the absence of position control, dissipated joint energy.

Implementation of Community-Wide Teen Pregnancy Prevention Initiatives: Focus on Partnerships.

PubMed

Tevendale, Heather D; Fuller, Taleria R; House, L Duane; Dee, Deborah L; Koumans, Emilia H

2017-03-01

Seeking to reduce teen pregnancy and births in communities with rates above the national average, the Centers for Disease Control and Prevention, in partnership with the U.S. Department of Health and Human Services Office of Adolescent Health Teen Pregnancy Prevention Program, developed a joint funding opportunity through which grantees worked to implement and test an approach involving community-wide teen pregnancy prevention initiatives. Once these projects had been in the field for 2.5 years, Centers for Disease Control and Prevention staff developed plans for a supplemental issue of the Journal of Adolescent Health to present findings from and lessons learned during implementation of the community-wide initiatives. When the articles included in the supplemental issue are considered together, common themes emerge, particularly those related to initiating, building, and maintaining strong partnerships. Themes seen across articles include the importance of (1) sharing local data with partners to advance initiative implementation, (2) defining partner roles from the beginning of the initiatives, (3) developing teams that include community partners to provide direction to the initiatives, and (4) addressing challenges to maintaining strong partnerships including partner staff turnover and delays in implementation. Copyright © 2016 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

Project Match; Ontario-Montclair School District, Ontario, California. A Submission to the Joint Dissemination Review Panel.

ERIC Educational Resources Information Center

Baker, Octave V.

One of seven career education programs chosen for nationwide dissemination by the Department of Health, Education and Welfare's Joint Dissemination Review Panel (JDRP), Project MATCH (Matching Attitudes and Talents to Career Horizons) is being conducted for grades K-8 in Ontario, California. For the years 1974-78, it received federal funding under…

Project CERES. Ceres Unified School District, Ceres, California. A Submission to the Joint Dissemination Review Panel.

ERIC Educational Resources Information Center

Baker, Octave V.

One of seven career education programs chosen for nationwide dissemination by the Department of Health, Education, and Welfare's Joint Dissemination Review Panel (JDRP), Project CERES (Career Education Responsive to Every Student) is being conducted for grades K-6 with planned expansion to grades 7-12. For the years 1972-76, it received funding…

Implementation of lung cancer CT screening in the Nordic countries.

PubMed

Pedersen, Jesper Holst; Sørensen, Jens Benn; Saghir, Zaigham; Fløtten, Øystein; Brustugun, Odd Terje; Ashraf, Haseem; Strand, Trond-Eirik; Friesland, Signe; Koyi, Hirsh; Ek, Lars; Nyrén, Sven; Bergman, Per; Jekunen, Antti; Nieminen, Eeva-Maija; Gudbjartsson, Tomas

2017-10-01

We review the current knowledge of CT screening for lung cancer and present an expert-based, joint protocol for the proper implementation of screening in the Nordic countries. Experts representing all the Nordic countries performed literature review and concensus for a joint protocol for lung cancer screening. Areas of concern and caution are presented and discussed. We suggest to perform CT screening pilot studies in the Nordic countries in order to gain experience and develop specific and safe protocols for the implementation of such a program.

Research on Joint Sealant Materials to Improve Installation and Performance : Final Report

DOT National Transportation Integrated Search

2017-12-01

The objectives of this project were to 1) identify failure modes and their mechanisms in joint seals in Texas, and to 2) identify what needs to be done to minimize the failures and improve joint seal performance. To achieve these objectives efficient...

Joint Group on Pollution Prevention: Partnering for Progress

NASA Technical Reports Server (NTRS)

Hill, R.

2001-01-01

This viewgraph presentation outlines the Joint Group on Pollution Prevention (JG-PP) partnership. Details are given on what groups comprise JG-PP, the proven methodology for what JG-PP can accomplish, the common problems, joint solutions, and shared efforts, and some of the JG-PP projects.

Japanese experiments for medical and educational broadcasts by Kiku satellite (PARTNERS Project using ETS-V)

NASA Astrophysics Data System (ADS)

Onishi, Yuji

The Ministry of Posts and Telecommunications (MPT), the National Space Development Agency (NASDA), and others have proposed joint space communication experiments based on the Engineering Test Satellite ETS-V. This joint international project is registered as the Peacesat Expansion / Pan-Pacific Information Network at the United Nations Space Agency Forum for the International Space Year. To make the project more recognizable, it was renamed PARTNERS (Pan-Pacific Regional Telecommunication Network Research Satellite) Project. Under the project, researchers in Japan and developing countries will perform experiments aimed at verifying satellite use technologies. The experiments are intended to promote international cooperation by providing an opportunity for technology transfer and exchange.

wHospital: a web-based application with digital signature for drugs dispensing management.

PubMed

Rossi, Lorenzo; Margola, Lorenzo; Manzelli, Vacia; Bandera, Alessandra

2006-01-01

wHospital is the result of an information technology research project, based on the utilization of a web based application for managing the hospital drugs dispensing. Part of wHospital back bone and its key distinguishing characteristic is the adoption of the digital signature system,initially deployed by the Government of Lombardia, a Northern Italy Region, throughout the distribution of smart cards to all the healthcare and hospital staffs. The developed system is a web-based application with a proposed Health Records Digital Signature (HReDS) handshake to comply with the national law and with the Joint Commission International Standards. The prototype application, for a single hospital Operative Unit (OU), has focused on data and process management, related to drug therapy. Following a multi-faceted selection process, the Infective Disease OU of the Hospital in Busto Arsizio, Lombardia, was chosen for the development and prototype implementation. The project lead time, from user requirement analysis to training and deployment was approximately 8 months. This paper highlights the applied project methodology, the system architecture, and the achieved preliminary results.

[Improving the provision of nesting and positioning for premature infants by nurses in neonatal intensive care units].

PubMed

Chen, Chiao-Min; Lin, Kai-Hui; Su, Hsiu-Ya; Lin, Mei-Hsiang; Hsu, Chu-Ling

2014-04-01

Nesting and positioning is a common nursing skill used in the developmental care of premature infants. This skill maintains premature infants in a comfortable position, facilitates the monitoring of stable vital signs, and enables spontaneous motor activity for normal neuromuscular and skeletal joint function. This project was designed to improve nursing staff cognition and skills regarding nesting and positioning for premature infants in the NICU. Strategies used in this project were: develop an infant position assessment tool; record a demonstration video about nesting and positioning skills to provide learning efficacy among the nursing staff; and modify an education program for new nurses. After implementation, nurse cognition regarding premature infant nesting and positioning increased from 58.3% to 92.3%. The rate of correct technique use similarly rose from 63.3% to 91.4%. This is a valid intervention for improving the correctness of nesting and positioning in nursing care. This project standardized education in terms of nesting and positioning practice goals and enhanced quality care for premature infants.

The IMI PROTECT project: purpose, organizational structure, and procedures.

PubMed

Reynolds, Robert F; Kurz, Xavier; de Groot, Mark C H; Schlienger, Raymond G; Grimaldi-Bensouda, Lamiae; Tcherny-Lessenot, Stephanie; Klungel, Olaf H

2016-03-01

The Pharmacoepidemiological Research on Outcomes of Therapeutics by a European ConsorTium (PROTECT) initiative was a collaborative European project that sought to address limitations of current methods in the field of pharmacoepidemiology and pharmacovigilance. Initiated in 2009 and ending in 2015, PROTECT was part of the Innovative Medicines Initiative, a joint undertaking by the European Union and pharmaceutical industry. Thirty-five partners including academics, regulators, small and medium enterprises, and European Federation of Pharmaceuticals Industries and Associations companies contributed to PROTECT. Two work packages within PROTECT implemented research examining the extent to which differences in the study design, methodology, and choice of data source can contribute to producing discrepant results from observational studies on drug safety. To evaluate the effect of these differences, the project applied different designs and analytic methodology for six drug-adverse event pairs across several electronic healthcare databases and registries. This papers introduces the organizational structure and procedures of PROTECT, including how drug-adverse event and data sources were selected, study design and analyses documents were developed, and results managed centrally. Copyright © 2016 John Wiley & Sons, Ltd.

Wireless Subsurface Microsensors for Health Monitoring of Thermal Protection Systems on Hypersonic Vehicles

NASA Technical Reports Server (NTRS)

Milos, Frank S.; Watters, David G.; Pallix, Joan B.; Bahr, Alfred J.; Huestis, David L.; Arnold, Jim (Technical Monitor)

2001-01-01

Health diagnostics is an area where major improvements have been identified for potential implementation into the design of new reusable launch vehicles in order to reduce life cycle costs, to increase safety margins, and to improve mission reliability. NASA Ames is leading the effort to develop inspection and health management technologies for thermal protection systems. This paper summarizes a joint project between NASA Ames and SRI International to develop 'SensorTags,' radio frequency identification devices coupled with event-recording sensors, that can be embedded in the thermal protection system to monitor temperature or other quantities of interest. Two prototype SensorTag designs containing thermal fuses to indicate a temperature overlimit are presented and discussed.

eHealth for Remote Regions: Findings from Central Asia Health Systems Strengthening Project.

PubMed

Sajwani, Afroz; Qureshi, Kiran; Shaikh, Tehniat; Sayani, Saleem

2015-01-01

Isolated communities in remote regions of Afghanistan, Kyrgyz Republic, Pakistan and Tajikistan lack access to high-quality, low-cost health care services, forcing them to travel to distant parts of the country, bearing an unnecessary financial burden. The eHealth Programme under Central Asia Health Systems Strengthening (CAHSS) Project, a joint initiative between the Aga Khan Foundation, Canada and the Government of Canada, was initiated in 2013 with the aim to utilize Information and Communication Technologies to link health care institutions and providers with rural communities to provide comprehensive and coordinated care, helping minimize the barriers of distance and time. Under the CAHSS Project, access to low-cost, quality health care is provided through a regional hub and spoke teleconsultation network of government and non-government health facilities. In addition, capacity building initiatives are offered to health professionals. By 2017, the network is expected to connect seven Tier 1 tertiary care facilities with 14 Tier 2 secondary care facilities for teleconsultation and eLearning. From April 2013 to September 2014, 6140 teleconsultations have been provided across the project sites. Additionally, 52 new eLearning sessions have been developed and 2020 staff members have benefitted from eLearning sessions. Ethics and patient rights are respected during project implementation.

Neutron Tomography of a Fuel Cell: Statistical Learning Implementation of a Penalized Likelihood Method

NASA Astrophysics Data System (ADS)

Coakley, Kevin J.; Vecchia, Dominic F.; Hussey, Daniel S.; Jacobson, David L.

2013-10-01

At the NIST Neutron Imaging Facility, we collect neutron projection data for both the dry and wet states of a Proton-Exchange-Membrane (PEM) fuel cell. Transmitted thermal neutrons captured in a scintillator doped with lithium-6 produce scintillation light that is detected by an amorphous silicon detector. Based on joint analysis of the dry and wet state projection data, we reconstruct a residual neutron attenuation image with a Penalized Likelihood method with an edge-preserving Huber penalty function that has two parameters that control how well jumps in the reconstruction are preserved and how well noisy fluctuations are smoothed out. The choice of these parameters greatly influences the resulting reconstruction. We present a data-driven method that objectively selects these parameters, and study its performance for both simulated and experimental data. Before reconstruction, we transform the projection data so that the variance-to-mean ratio is approximately one. For both simulated and measured projection data, the Penalized Likelihood method reconstruction is visually sharper than a reconstruction yielded by a standard Filtered Back Projection method. In an idealized simulation experiment, we demonstrate that the cross validation procedure selects regularization parameters that yield a reconstruction that is nearly optimal according to a root-mean-square prediction error criterion.

Multi-optimization Criteria-based Robot Behavioral Adaptability and Motion Planning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pin, Francois G.

2002-06-01

Robotic tasks are typically defined in Task Space (e.g., the 3-D World), whereas robots are controlled in Joint Space (motors). The transformation from Task Space to Joint Space must consider the task objectives (e.g., high precision, strength optimization, torque optimization), the task constraints (e.g., obstacles, joint limits, non-holonomic constraints, contact or tool task constraints), and the robot kinematics configuration (e.g., tools, type of joints, mobile platform, manipulator, modular additions, locked joints). Commercially available robots are optimized for a specific set of tasks, objectives and constraints and, therefore, their control codes are extremely specific to a particular set of conditions. Thus,more » there exist a multiplicity of codes, each handling a particular set of conditions, but none suitable for use on robots with widely varying tasks, objectives, constraints, or environments. On the other hand, most DOE missions and tasks are typically ''batches of one''. Attempting to use commercial codes for such work requires significant personnel and schedule costs for re-programming or adding code to the robots whenever a change in task objective, robot configuration, number and type of constraint, etc. occurs. The objective of our project is to develop a ''generic code'' to implement this Task-space to Joint-Space transformation that would allow robot behavior adaptation, in real time (at loop rate), to changes in task objectives, number and type of constraints, modes of controls, kinematics configuration (e.g., new tools, added module). Our specific goal is to develop a single code for the general solution of under-specified systems of algebraic equations that is suitable for solving the inverse kinematics of robots, is useable for all types of robots (mobile robots, manipulators, mobile manipulators, etc.) with no limitation on the number of joints and the number of controlled Task-Space variables, can adapt to real time changes in number and type of constraints and in task objectives, and can adapt to changes in kinematics configurations (change of module, change of tool, joint failure adaptation, etc.).« less

Evaluation of pipe-type cable joint restraint systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Silver, D.A.; Seman, G.W.

1990-03-01

the purpose of this project was to evaluate two systems for restraining the movement of 345kV high-pressure oil-filled (HPOF) cable joints during load cycling. Problems with joints and adjacent cables due to thermomechanical bending (TMB) experienced by the Consolidated Edison Company of New York and Public Service Electric Gas Company of New Jersey are reviewed. Some approaches to reducing or preventing TMB induced damage to HPOF pipe type cable joints are discussed. The design and operation of a special test apparatus for simulating TMB effects under laboratory conditions is described. One of the two joint restraint systems evaluated under thismore » project was developed by PSE G and employed wedging devices, which could be retrofitted into existing installations, that limited the longitudinal movement of the joints during load cycling. The other system developed by Pirelli Cable Corporation applied the restraining force to the cylindrical portion of the hand applied joint insulation by means of support spiders and steel rods attached to the reducer faces. The test results show that the PSE G restraint system can effectively limit joint longitudinal movement while causing a minimal amount of mechanical disturbance to the joint stress cones. The test results obtained with the PCC system are inconclusive and indicate that further refinement and testing are required to demonstrate the effectiveness of this promising joint restraint system.« less

Towards a fair consideration of PrEP as part of combination HIV prevention in Latin America

PubMed Central

Ravasi, Giovanni; Grinsztejn, Beatriz; Baruch, Ricardo; Guanira, Juan Vicente; Luque, Ricardo; Cáceres, Carlos F; Ghidinelli, Massimo

2016-01-01

Introduction Despite progress in scaling up antiretroviral treatment, HIV prevention strategies have not been successful in significantly curbing HIV incidence in Latin America. HIV prevention interventions need to be expanded to target the most affected key populations with a combination approach, including new high impact technologies. Oral pre-exposure prophylaxis (PrEP) is recommended as additional prevention choice for individuals at higher risk of infection and could become a cost-effective prevention tool. We discuss the barriers and solutions for a fair consideration of PrEP as part of combination HIV prevention strategies in Latin America. Discussion Although demonstration projects are ongoing or being planned in a number of countries, to date no Latin American country has implemented a public PrEP programme. The knowledge of policymakers about PrEP implementation needs to be strengthened, and programmatic guidance and cost estimate tools need to be developed to support adequate planning. Despite high levels of awareness among health providers, especially if engaged in HIV or key population care, willingness to prescribe PrEP is still low due to the lack of national policies and guidelines. Key populations, especially men who have sex with men, transgender women and sex workers, have been engaged in demonstration projects, and qualitative research shows high awareness and willingness to use PrEP, especially if accessible in the public sector for free or at affordable price. Concerns of safety, adherence, effectiveness and risk compensation need to be addressed through targeted social communication strategies to improve PrEP knowledge and stimulate demand. Alliance among policymakers, civil society and representatives from key populations, healthcare providers and researchers will be critical for the design and successful implementation of PrEP demonstration projects of locally adapted delivery models. The use of mechanisms of joint negotiation and procurement of antiretrovirals could reduce costs and significantly increase the cost-effectiveness of PrEP. Conclusions PrEP is an additional prevention tool and should be implemented in combination and synergy with other prevention interventions. PrEP programmes should target high-risk individuals from key populations for higher cost-effectiveness. Demonstration projects may generate strategic information for and lead to the implementation of full-scale PrEP programmes. PMID:27760687

Towards a fair consideration of PrEP as part of combination HIV prevention in Latin America.

PubMed

Ravasi, Giovanni; Grinsztejn, Beatriz; Baruch, Ricardo; Guanira, Juan Vicente; Luque, Ricardo; Cáceres, Carlos F; Ghidinelli, Massimo

2016-01-01

Despite progress in scaling up antiretroviral treatment, HIV prevention strategies have not been successful in significantly curbing HIV incidence in Latin America. HIV prevention interventions need to be expanded to target the most affected key populations with a combination approach, including new high impact technologies. Oral pre-exposure prophylaxis (PrEP) is recommended as additional prevention choice for individuals at higher risk of infection and could become a cost-effective prevention tool. We discuss the barriers and solutions for a fair consideration of PrEP as part of combination HIV prevention strategies in Latin America. Although demonstration projects are ongoing or being planned in a number of countries, to date no Latin American country has implemented a public PrEP programme. The knowledge of policymakers about PrEP implementation needs to be strengthened, and programmatic guidance and cost estimate tools need to be developed to support adequate planning. Despite high levels of awareness among health providers, especially if engaged in HIV or key population care, willingness to prescribe PrEP is still low due to the lack of national policies and guidelines. Key populations, especially men who have sex with men, transgender women and sex workers, have been engaged in demonstration projects, and qualitative research shows high awareness and willingness to use PrEP, especially if accessible in the public sector for free or at affordable price. Concerns of safety, adherence, effectiveness and risk compensation need to be addressed through targeted social communication strategies to improve PrEP knowledge and stimulate demand. Alliance among policymakers, civil society and representatives from key populations, healthcare providers and researchers will be critical for the design and successful implementation of PrEP demonstration projects of locally adapted delivery models. The use of mechanisms of joint negotiation and procurement of antiretrovirals could reduce costs and significantly increase the cost-effectiveness of PrEP. PrEP is an additional prevention tool and should be implemented in combination and synergy with other prevention interventions. PrEP programmes should target high-risk individuals from key populations for higher cost-effectiveness. Demonstration projects may generate strategic information for and lead to the implementation of full-scale PrEP programmes.

Why Do Staff of Joint-Use Libraries Sometimes Fail to Integrate? Investigating Cultures and Ethics in a Public-Tertiary Joint-Use Library

ERIC Educational Resources Information Center

Calvert, Philip James

2010-01-01

Joint-use libraries have identified staff integration as a problem. Using focus groups, this project investigated the culture, professional ethics, and attitudes of staff in a public-tertiary joint-use library in Auckland, New Zealand. Findings show some difference in organizational cultures, but more variation at the lower level of roles and…

Maloti Drakensberg Transfrontier Park joint management: Sehlabathebe National Park (Lesotho) and the uKhahlamba Drakensberg Park World Heritage Site (South Africa)

Treesearch

John M. Crowson

2011-01-01

On 8 April 2005, the first Joint Management Committee meeting was held at Qacha's Nek, Lesotho. This was to ensure co-operative management through joint management. The formation of a Joint Management Committee was part of the Bilateral Maloti Drakensberg Transfrontier Project agreement and consisted of officials from the Ministry of Tourism, Environment and...

Low Activation Joining of SiC/SiC Composites for Fusion Applications: Thermomechanical Modeling of Dual-Phase Microstructures and Dissimilar Material Joints

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nguyen, Ba Nghiep; Henager, Charles H.; Kurtz, Richard J.

2016-09-30

Finite element (FE) continuum damage mechanics (CDM) models have been developed to simulate and model dual-phase joints and cracked joints for improved analysis of SiC materials in nuclear environments. This report extends the analysis from the last reporting cycle by including preliminary thermomechanical analyses of cracked joints and implementation of dual-phase damage models.

A play and joint attention intervention for teachers of young children with autism: a randomized controlled pilot study.

PubMed

Wong, Connie S

2013-05-01

The aim of this study was to pilot test a classroom-based intervention focused on facilitating play and joint attention for young children with autism in self-contained special education classrooms. Thirty-three children with autism between the ages of 3 and 6 years participated in the study with their classroom teachers (n = 14). The 14 preschool special education teachers were randomly assigned to one of three groups: (1) symbolic play then joint attention intervention, (2) joint attention then symbolic intervention, and (3) wait-list control period then further randomized to either group 1 or group 2. In the intervention, teachers participated in eight weekly individualized 1-h sessions with a researcher that emphasized embedding strategies targeting symbolic play and joint attention into their everyday classroom routines and activities. The main child outcome variables of interest were collected through direct classroom observations. Findings indicate that teachers can implement an intervention to significantly improve joint engagement of young children with autism in their classrooms. Furthermore, multilevel analyses showed significant increases in joint attention and symbolic play skills. Thus, these pilot data emphasize the need for further research and implementation of classroom-based interventions targeting play and joint attention skills for young children with autism.

2007 Precision Strike PEO Summer Forum - Joint Perspectives on Precision Engagement

DTIC Science & Technology

2007-07-11

Status,” Colonel Richard Justice, USAF—Commander of the Miniature Munitions Systems Group (MMSG), Eglin Air Force Base “Unmanned Systems (UAS) Roadmap...Role in the Roadmap Implementation Methods & Processes Working Group Issues delineated in Implementation Plan form basis for JTEM methodology...Test and Evaluation JMETC – Joint Mission Environment Test Capability WG – Working Group DOT&E AT&L DOT&E Unclassified 5 Background: JTEM Problem

Joint Venture Health Plans May Give ACOs a Run for Their Money.

PubMed

Reinke, Thomas

2016-12-01

Joint venture plans are starting to demonstrate their ability to implement clinical management and financial management reforms. A JV health plan replaces the offloading of financial risk by health plans to ill-equipped providers with an executive-level cost management committee stated jointly by the hospital and payer.

Reforming The U.S. Security Assistance Export Process To Build Existing Capabilities

DTIC Science & Technology

2015-12-01

NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA JOINT APPLIED PROJECT REFORMING THE U.S. SECURITY ASSISTANCE EXPORT PROCESS TO...December 2015 3. REPORT TYPE AND DATES COVERED Joint applied project 4. TITLE AND SUBTITLE REFORMING THE U.S. SECURITY ASSISTANCE EXPORT PROCESS TO...the programs. While acknowledging the expanding role of the programs, the findings indicate a need for reforms in the export -control mechanisms

Joint Technical Architecture for Robotic Systems (JTARS)-Final Report

NASA Technical Reports Server (NTRS)

Bradley, Arthur T.; Holloway, Sidney E., III

2006-01-01

This document represents the final report for the Joint Technical Architecture for Robotic Systems (JTARS) project, funded by the Office of Exploration as part of the Intramural Call for Proposals of 2005. The project was prematurely terminated, without review, as part of an agency-wide realignment towards the development of a Crew Exploration Vehicle (CEV) and meeting the near-term goals of lunar exploration.

Flat H Frangible Joint Evolution

NASA Technical Reports Server (NTRS)

Diegelman, Thomas E.; Hinkel, Todd J.; Benjamin, Andrew; Rochon, Brian V.; Brown, Christopher W.

2016-01-01

Space vehicle staging and separation events require pyrotechnic devices. They are single-use mechanisms that cannot be tested, nor can failure-tolerant performance be demonstrated in actual flight articles prior to flight use. This necessitates the implementation of a robust design and test approach coupled with a fully redundant, failure-tolerant explosive mechanism to ensure that the system functions even in the event of a single failure. Historically, NASA has followed the single failure-tolerant (SFT) design philosophy for all human-rated spacecraft, including the Space Shuttle Program. Following the end of this program, aerospace companies proposed building the next generation human-rated vehicles with off-the-shelf, non-redundant, zero-failure-tolerant (ZFT) separation systems. Currently, spacecraft and launch vehicle providers for both the Orion and Commercial Crew Programs (CCPs) plan to deviate from the heritage safety approach and NASA's SFT human rating requirements. Both programs' partners have base-lined ZFT frangible joints for vehicle staging and fairing separation. These joints are commercially available from pyrotechnic vendors. Non-human-rated missions have flown them numerous times. The joints are relatively easy to integrate structurally within the spacecraft. In addition, the separation event is debris free, and the resultant pyro shock is lower than that of other design solutions. It is, however, a serious deficiency to lack failure tolerance. When used for critical applications on human-rated vehicles, a single failure could potentially lead to loss of crew (LOC) or loss of mission (LOM)). The Engineering and Safety & Mission Assurance directorates within the NASA Johnson Space Center took action to address this safety issue by initiating a project to develop a fully redundant, SFT frangible joint design, known as the Flat H. Critical to the ability to retrofit on launch vehicles being developed, the SFT mechanisms must fit within the same three-dimensional envelope as current designs as well as meet structural loads requirements. There is increased mass associated with the redundant design, and the goal is to minimize the weight impact as much as possible. These requirements presented significant challenges, both technically and financially; these challenges will be explored in this paper. Perhaps greater than the technical issues confronted during this design process, were the financial considerations. These were a significant part of the story of this design and development plan. Insufficient financial and labor resources were formidable barriers to completing this project. Nevertheless, JSC personnel successfully conducted several test series at JSC with very useful results. The many lessons learned drove design improvements, performance efficiency, and increased functional reliability. This paper examines the significant technical and financial challenges that these requirements posed to the project team. It discusses the evolution of the SFT frangible joint design, including optimization, testing, and successful partnering of the Johnson Space Center (JSC) engineering and JSC safety organizations, to enhance the flight safety margin for America's next generation of human-rated space vehicles.

The telemedicine spacebridge project: A joint US/Russian venture in long distance medicine via satellite

NASA Technical Reports Server (NTRS)

Zuzek, John E.; Cauley, Michael A.; Hollansworth, James E.

1994-01-01

The Telemedicine Spacebridge Demonstration Project is a joint U.S./Russian program whose purpose is to further the application of telemedicine both internationally, domestically, and in space. The system has been set up to use a Russian satellite over the Atlantic Ocean and a U.S. domestic satellite to allow physicians a two-way video and audio link between various sites of medical centers in the United States and the Central Hospital in Moscow, Russia. This paper contains a description of the project background, the Spacebridge system, the individual pieces of the system, and the operational experience gained thus far in the project.

A feasibility study of hand kinematics for EVA analysis using magnetic resonance imaging

NASA Technical Reports Server (NTRS)

Dickenson, Rueben D.; Lorenz, Christine H.; Peterson, Steven W.; Strauss, Alvin M.; Main, John A.

1992-01-01

A new method of analyzing the kinematics of joint motion is developed. Magnetic Resonance Imaging (MRI) offers several distinct advantages. Past methods of studying anatomic joint motion have usually centered on four approaches. These methods are x-ray projection, goniometric linkage analysis, sonic digitization, and landmark measurement of photogrammetry. Of these four, only x-ray is applicable for in vivo studies. The remaining three methods utilize other types of projections of inter-joint measurements, which can cause various types of error. MRI offers accuracy in measurement due to its tomographic nature (as opposed to projection) without the problems associated with x-ray dosage. Once the data acquisition of MR images was complete, the images were processed using a 3D volume rendering workstation. The metacarpalphalangeal (MCP) joint of the left index finger was selected and reconstructed into a three-dimensional graphic display. From the reconstructed volumetric images, measurements of the angles of movement of the applicable bones were obtained and processed by analyzing the screw motion of the MCP joint. Landmark positions were chosen at distinctive locations of the joint at fixed image threshold intensity levels to ensure repeatability. The primarily two dimensional planar motion of this joint was then studied using a method of constructing coordinate systems using three (or more) points. A transformation matrix based on a world coordinate system described the location and orientation of a local target coordinate system. Future research involving volume rendering of MRI data focusing on the internal kinematics of the hand's individual ligaments, cartilage, tendons, etc. will follow. Its findings will show the applicability of MRI to joint kinematics for gaining further knowledge of the hand-glove (power assisted) design for extravehicular activity (EVA).

Laser Welding Dissimilar Reflective Alloys

NASA Technical Reports Server (NTRS)

Mccay, M. H.; Gopinathan, S.; Kahlen, F.; Speigel, L.

1993-01-01

This project, jointly sponsored by Rocketdyne and CSTAR, involves the development of laser joining of materials which have heretofore been impractical to bond. Of particular interest are joints between stainless steel and copper and also aluminum 6061 to aluminum 2219. CSTAR has a unique opportunity in this area since both the process and development and diagnostics are of interest to industry. Initial results using the pulse tailored laser welding technique developed in CLA for joining crack sensitive materials have proven promising for the aluminum joints based upon metallurgical and electronic microprobe analysis. A declaration of success requires additional mechanical testing. A CW technique has been applied to the stainless-copper joining with some preliminary success. These joints are of significant interest for aeronautics and rocket propulsion applications and the project is expected to continue.

Laser welding dissimilar reflective alloys

NASA Astrophysics Data System (ADS)

McCay, M. H.; Gopinathan, S.; Kahlen, F.; Speigel, L.

1993-01-01

This project, jointly sponsored by Rocketdyne and CSTAR, involves the development of laser joining of materials which have heretofore been impractical to bond. Of particular interest are joints between stainless steel and copper and also aluminum 6061 to aluminum 2219. CSTAR has a unique opportunity in this area since both the process and development and diagnostics are of interest to industry. Initial results using the pulse tailored laser welding technique developed in CLA for joining crack sensitive materials have proven promising for the aluminum joints based upon metallurgical and electronic microprobe analysis. A declaration of success requires additional mechanical testing. A CW technique has been applied to the stainless-copper joining with some preliminary success. These joints are of significant interest for aeronautics and rocket propulsion applications and the project is expected to continue.

[Primary care and mental health care collaboration in patients with depression: Evaluation of a pilot experience].

PubMed

Calderón, Carlos; Balagué, Laura; Iruin, Álvaro; Retolaza, Ander; Belaunzaran, Jon; Basterrechea, Javier; Mosquera, Isabel

2016-01-01

To implement and assess a collaborative experience between Primary Care (PC) and Mental Health (MH) in order to improve the care of patients with depression. Pilot collaborative project from a participatory action research approach during 2013. Basque Country. Osakidetza (Basque Health Service). Bizkaia and Gipuzkoa. The study included 207 professionals from general practice, nursing, psychiatry, psychiatric nursing, psychology and social work of 9 health centres and 6 mental health centres of Osakidetza. Shared design and development of four axes of intervention: 1) Communication and knowledge between PC and MH professionals, 2) Improvement of diagnostic coding and referral of patients, 3) Training programmes with meetings and common Clinical Practice Guidelines, and 4) Evaluation. Intervention and control questionnaires to professionals of the centres on the knowledge and satisfaction in the PC-MH relationship, joint training activities, and assessment of the experience. Osakidetza registers of prevalences, referrals and treatments. Follow-up meetings. Improvement in the 4 axes of intervention in the participant centres compared with the controls. Identification of factors to be considered in the development and sustainability of PC-MH collaborative care. The pilot experience confirms that collaborative projects promoted by PC and MH can improve depression care and the satisfaction of professionals. They are complex projects that need simultaneous interventions adjusted to the particularities of the health services. Multidisciplinary and continuous participation and management and information system support are necessary for their implementation. Copyright © 2015 Elsevier España, S.L.U. All rights reserved.

Developing a common framework for integrated solid waste management advances in Managua, Nicaragua.

PubMed

Olley, Jane E; IJgosse, Jeroen; Rudin, Victoria; Alabaster, Graham

2014-09-01

This article describes the municipal solid waste management system in Managua, Nicaragua. It updates an initial profile developed by the authors for the 2010 UN-HABITAT publication Solid Waste Management in the World's Cities and applies the methodology developed in that publication. In recent years, the municipality of Managua has been the beneficiary of a range of international cooperation projects aimed at improving municipal solid waste management in the city. The article describes how these technical assistance and infrastructure investments have changed the municipal solid waste management panorama in the city and analyses the sustainability of these changes. The article concludes that by working closely with the municipal government, the UN-HABITAT project Strengthening Capacities for Solid Waste Management in Managua was able to unite these separate efforts and situate them within a strategic framework to guide the evolution of the municipal solid waste management system in the forthcoming years. The creation of this multi-stakeholder platform allowed for the implementation of joint activities and ensured coherence in the products generated by the different projects. This approach could be replicated in other cities and in other sectors with similar effect. Developing a long term vision was essential for the advancement of municipal solid waste management in the city. Nevertheless, plan implementation may still be undermined by the pressures of the short term municipal administrative government, which emphasize operational over strategic investment. © The Author(s) 2014.

A Preliminary Tsunami vulnerability analysis for Bakirkoy district in Istanbul

NASA Astrophysics Data System (ADS)

Tufekci, Duygu; Lutfi Suzen, M.; Cevdet Yalciner, Ahmet; Zaytsev, Andrey

2016-04-01

Resilience of coastal utilities after earthquakes and tsunamis has major importance for efficient and proper rescue and recovery operations soon after the disasters. Vulnerability assessment of coastal areas under extreme events has major importance for preparedness and development of mitigation strategies. The Sea of Marmara has experienced numerous earthquakes as well as associated tsunamis. There are variety of coastal facilities such as ports, small craft harbors, and terminals for maritime transportation, water front roads and business centers mainly at North Coast of Marmara Sea in megacity Istanbul. A detailed vulnerability analysis for Yenikapi region and a detailed resilience analysis for Haydarpasa port in Istanbul have been studied in previously by Cankaya et al., (2015) and Aytore et al., (2015) in SATREPS project. In this study, the methodology of vulnerability analysis under tsunami attack given in Cankaya et al., (2015) is modified and applied to Bakirkoy district of Istanbul. Bakirkoy district is located at western part of Istanbul and faces to the North Coast of Marmara Sea from 28.77oE to 28.89oE. High resolution spatial dataset of Istanbul Metropolitan Municipality (IMM) is used and analyzed. The bathymetry and topography database and the spatial dataset containing all buildings/structures/infrastructures in the district are collated and utilized for tsunami numerical modeling and following vulnerability analysis. The tsunami parameters from deterministically defined worst case scenarios are computed from the simulations using tsunami numerical model NAMI DANCE. The vulnerability assessment parameters in the district according to vulnerability and resilience are defined; and scored by implementation of a GIS based TVA with appropriate MCDA methods. The risk level is computed using tsunami intensity (level of flow depth from simulations) and TVA results at every location in Bakirkoy district. The preliminary results are presented and discussed. Acknowledgements: Partial support by Japan-Turkey Joint Research Project by JICA on earthquakes and tsunamis in Marmara Region in (JICA SATREPS - MarDiM Project), 603839 ASTARTE Project of EU, UDAP-C-12-14 project of AFAD, Turkey, 108Y227, 113M556, 213M534 projects of TUBITAK Turkey, RAPSODI (CONCERT_Dis-021) of CONCERT-Japan Joint Call and Istanbul Metropolitan Municipality are acknowledged.

Extending XNAT Platform with an Incremental Semantic Framework

PubMed Central

Timón, Santiago; Rincón, Mariano; Martínez-Tomás, Rafael

2017-01-01

Informatics increases the yield from neuroscience due to improved data. Data sharing and accessibility enable joint efforts between different research groups, as well as replication studies, pivotal for progress in the field. Research data archiving solutions are evolving rapidly to address these necessities, however, distributed data integration is still difficult because of the need of explicit agreements for disparate data models. To address these problems, ontologies are widely used in biomedical research to obtain common vocabularies and logical descriptions, but its application may suffer from scalability issues, domain bias, and loss of low-level data access. With the aim of improving the application of semantic models in biobanking systems, an incremental semantic framework that takes advantage of the latest advances in biomedical ontologies and the XNAT platform is designed and implemented. We follow a layered architecture that allows the alignment of multi-domain biomedical ontologies to manage data at different levels of abstraction. To illustrate this approach, the development is integrated in the JPND (EU Joint Program for Neurodegenerative Disease) APGeM project, focused on finding early biomarkers for Alzheimer's and other dementia related diseases. PMID:28912709

Extending XNAT Platform with an Incremental Semantic Framework.

PubMed

Timón, Santiago; Rincón, Mariano; Martínez-Tomás, Rafael

2017-01-01

Informatics increases the yield from neuroscience due to improved data. Data sharing and accessibility enable joint efforts between different research groups, as well as replication studies, pivotal for progress in the field. Research data archiving solutions are evolving rapidly to address these necessities, however, distributed data integration is still difficult because of the need of explicit agreements for disparate data models. To address these problems, ontologies are widely used in biomedical research to obtain common vocabularies and logical descriptions, but its application may suffer from scalability issues, domain bias, and loss of low-level data access. With the aim of improving the application of semantic models in biobanking systems, an incremental semantic framework that takes advantage of the latest advances in biomedical ontologies and the XNAT platform is designed and implemented. We follow a layered architecture that allows the alignment of multi-domain biomedical ontologies to manage data at different levels of abstraction. To illustrate this approach, the development is integrated in the JPND (EU Joint Program for Neurodegenerative Disease) APGeM project, focused on finding early biomarkers for Alzheimer's and other dementia related diseases.

7 CFR 3405.7 - Joint project proposals.

Code of Federal Regulations, 2014 CFR

2014-01-01

... agricultural sciences. The goals of such joint initiatives should include maximizing the use of limited...), increasing cost-effectiveness through achieving economies of scale, strengthening the scope and quality of a...

7 CFR 3405.7 - Joint project proposals.

Code of Federal Regulations, 2013 CFR

2013-01-01

... agricultural sciences. The goals of such joint initiatives should include maximizing the use of limited...), increasing cost-effectiveness through achieving economies of scale, strengthening the scope and quality of a...

7 CFR 3405.7 - Joint project proposals.

Code of Federal Regulations, 2012 CFR

2012-01-01

... agricultural sciences. The goals of such joint initiatives should include maximizing the use of limited...), increasing cost-effectiveness through achieving economies of scale, strengthening the scope and quality of a...

Interprofessional practice in health care: an educational project with four learning sequences for students from six study programs.

PubMed

Nowak, Anna Christina; Klimke-Jung, Kathrin; Schäfer, Thorsten; Reif, Karl

2016-01-01

In response to demographic changes and the growing complexity of healthcare demands, national and international organizations are requiring greater cooperation among the health professions. Implementation of interprofessional learning programs within study programs in medicine, midwifery, nursing, and therapy is still rare. The first projects are currently underway in Germany. This paper presents the experience gathered by the organizers as interprofessional courses for six study programs were implemented. As part of the collaborative project "Interprofessional Practice in Health Care" between the Medical School at the Ruhr University in Bochum and the Department for Applied Health Sciences at the Hochschule für Gesundheit, interprofessional curricular units were developed, taught and evaluated with the aim of establishing permanent and joint curricular structures at the two German universities. Imparting communication skills, knowledge of and appreciation for the work performed by the other health professions, as well as having students reflect on their own professional roles and responsibilities, were the focus of four curricular units. Students worked together in small interprofessional groups. A total of 220 students enrolled in occupational therapy, midwifery, speech therapy, medicine, nursing, and physiotherapy participated in small-group seminars. When conducting and implementing the seminars, administrative and methodological challenges became apparent, and this should be taken into consideration in regard to any future development of interprofessional courses. Integration into existing curricula, along with finding time in the various schedules and appropriate classroom space for small groups, were among the challenges faced. For over 86% of the students it was important that students from all six of the degree programs involved participated in the project. A detailed analysis of the content and evaluation will follow. The value of the project's aim to include as many study programs in the health professions and medicine as possible was confirmed by the participating students. However, accomplishing this requires a substantial amount of organizational effort in terms of scheduling, finding classroom space and integration into existing curricula. Careful attention must be given specifically to the coordination of monoprofessional and interprofessional teaching units.

Incidence of inadvertent intra-articular lumbar facet joint injection during fluoroscopically guided interlaminar epidural steroid injection.

PubMed

Huang, Ambrose J; Palmer, William E

2012-02-01

To determine the incidence of inadvertent lumbar facet joint injection during an interlaminar epidural steroid injection (ESI). A total of 686 interlaminar lumbar ESIs were performed from January 1, 2009 to December 31, 2009. Archived images from these cases were retrospectively reviewed on the PACS. Positive cases of inadvertent lumbar facet joint injection were identified by the characteristic sigmoid-shaped contrast pattern projecting over the posterior elements on the lateral view and/or ovoid contrast projecting over the facet joints on the anteroposterior (AP) view. Eight positive events were identified (1.2%). There was no statistically significant gender or lumbar level predilection. In 3/8 of the positive cases (37.5%), the inadvertent facet joint injection was recognized by the operator. The needle was repositioned as a result, and contrast within the posterior epidural space was documented by the end of the procedure. In 5/8 of the positive cases (62.5%), the patients reported an immediate decrease in the presenting pain. The incidence of inadvertent lumbar facet joint injection during an interlaminar epidural steroid injection is low. Recognizing the imaging features of this event permits the operator to redirect the needle tip into the epidural space and/or identify the facet joint(s) as a source of the patient's presenting pain.

Facing policy challenges with inter- and transdisciplinary soil research focused on the UN Sustainable Development Goals

NASA Astrophysics Data System (ADS)

Bouma, Johan; Montanarella, Luca

2016-04-01

Our current information society, populated by increasingly well-informed and critical stakeholders, presents a challenge to both the policy and science arenas. The introduction of the UN Sustainable Development Goals (SDGs) offers a unique and welcome opportunity to direct joint activities towards these goals. Soil science, even though it is not mentioned as such, plays an important role in realizing a number of SDGs focusing on food, water, climate, health, biodiversity, and sustainable land use. A plea is made for a systems approach to land use studies, to be initiated by soil scientists, in which these land-related SDGs are considered in an integrated manner. To connect with policy makers and stakeholders, two approaches are functional. The first of these is the policy cycle when planning and executing research, which includes signaling, design, decision making, implementation, and evaluation. Many current research projects spend little time on signaling, which may lead to disengagement of stakeholders. Also, implementation is often seen as the responsibility of others, while it is crucial to demonstrate - if successful - the relevance of soil science. The second approach is the DPSIR approach when following the policy cycle in land-related research, distinguishing external drivers, pressures, impact, and responses to land use change that affect the state of the land in the past, present, and future. Soil science cannot by itself realize SDGs, and interdisciplinary studies on ecosystem services (ESs) provide an appropriate channel to define contributions of soil science in terms of the seven soil functions. ESs, in turn, can contribute to addressing the six SDGs (2, 3, 6, 12, 13, and 15) with an environmental, land-related character. SDGs have a societal focus and future soil science research can only be successful if stakeholders are part of the research effort in transdisciplinary projects, based on the principle of time-consuming "joint learning". The internal organization of the soil science discipline is not yet well tuned to the needs of inter- and transdisciplinary approaches.

[Implementation of the program of "Collaborative Development of Advanced Practical Education to Train Pharmacists in Leadership" under the joint operation of the pharmaceutical departments in fourteen national universities].

PubMed

Hirata, Kazumasa; Tamura, Satoru; Kobayashi, Motomasa

2012-01-01

"Collaborative Development of Advanced Practical Education Program to Train Pharmacists with Leadership" applied jointly by the pharmaceutical departments of fourteen national universities was selected to receive the special expenditure support of Ministry of Education, Culture, Sports, Science and Technology for fiscal year 2010 under "the Training of Highly Skillful Professionals and Improvement of the Quality of the Function of Professional Education". This project is to promote the collaborative development of the educational program which will make it possible to further advance and substantiate the education of pharmacists in the six year course of the pharmaceutical department for the ultimate purpose to introduce pharmacists with leadership who can play an active role and fill in a leadership position in a wide range of responsibilities into the society which, more and more, has come to expect pharmacy to take the initiative in acting against health hazards caused by infections, foods and environmental pollution as well as to meet the diversification of healthcare. To be more specific, this project is to try and evaluate the following programs repeatedly based on the plan-do-check-act (PDCA) cycle: 1) Practical medical and pharmaceutical education program; 2) Program concerning research on long term themes and advanced education; 3) Program concerning training and education of SPs (standardized patients or simulated patients) and PBL (problem-based learning) tutorial education; and 4) Program concerning the method of evaluation of education. Through this repeated trial and evaluation, this project ultimately seeks to construct a highly effective practical educational program which integrates each university's achievements and educational attempts rich in originality.

LIFAC Demonstration at Richmond Power and Light Whitewater Valley Unit No. 2 Volume II: Project Performance and Economics

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

The C1ean Coal Technology (CCT) Program has been recognized in the National Energy Strategy as a major initiative whereby coal will be able to reach its full potential as a source of energy for the nation and the international marketplace. Attainment of this goal depends upon the development of highly efficient, environmentally sound, competitive coal utilization technologies responsive to diverse energy markets and varied consumer needs. The CCT Program is an effort jointly funded by government and industry whereby the most promising of the advanced coal-based technologies are being moved into the marketplace through demonstration. The CCT Program is beingmore » implemented through a total of five competitive solicitations. LIFAC North America, a joint venture partnership of ICF Kaiser Engineers, Inc., and Tampella Power Corporation, is currently demonstrating the LIFAC flue gas desulfurization technology developed by Tampella Power. This technology provides sulfur dioxide emission control for power plants, especially existing facilities with tight space limitations. Sulfur dioxide emissions are expected to be reduced by up to 85% by using limestone as a sorbent. The LIFAC technology is being demonstrated at Whitewater Valley Unit No. 2, a 60-MW coal-fired power plant owned and operated by Richmond Power and Light (RP&L) and located in Richmond, Indiana. The Whitewater plant consumes high-sulfur coals, with sulfur contents ranging from 2.0-2.9 $ZO. The project, co-funded by LIFAC North America and DOE, is being conducted with the participation of Richmond Power and Light, the State of Indiana, the Electric Power Research Institute (EPRI), and the Black Beauty Coal Company. The project has a total cost of $21.4 million and a duration of 48 months from the preliminary design phase through the testing program.« less

The 1990-1991 project summaries

NASA Technical Reports Server (NTRS)

1991-01-01

Georgia Tech's School of Textile & Fiber Engineering and School of Mechanical Engineering participated in four cooperative design efforts this year. One group designed a thermal shield for a lunar telescope. The second group designed a selenotextile habitat shielding structure. The third group designed a pneumatically assisted elbow joint for the NASA zero-prebreathe suit (ZPS). The final group designed an electromechanical system to power an astronaut's finger joints. Summaries of these projects are presented.

The 1990-1991 project summaries

NASA Astrophysics Data System (ADS)

Georgia Tech's School of Textile & Fiber Engineering and School of Mechanical Engineering participated in four cooperative design efforts this year. One group designed a thermal shield for a lunar telescope. The second group designed a selenotextile habitat shielding structure. The third group designed a pneumatically assisted elbow joint for the NASA zero-prebreathe suit (ZPS). The final group designed an electromechanical system to power an astronaut's finger joints. Summaries of these projects are presented.

EUFAR the key portal and network for airborne research in Europe

NASA Astrophysics Data System (ADS)

Gérard, Elisabeth; Brown, Philip

2017-04-01

Created in 2000 and supported by the EU Framework Programmes since then as an Integrating Activities' project, EUFAR (European Facility of Airborne Research in environmental and Geo-sciences) was born out of the necessity to create a central network and access point for the airborne research community in Europe. With the aim to support researchers by granting them access to aircraft and instrumentation most suited to the needs of researchers across Europe, not accessible in their home countries, EUFAR also provides technical support and training in the field of airborne research for the environmental and geosciences, and enables the sharing of expertise and harmonisation of research practices. Today, EUFAR2 (2014-2018) coordinates and facilitates transnational access to 19 instrumented aircraft and 5 remote-sensing instruments through the 14 operators who are part of EUFAR's current 24-partner European consortium. In addition, the current project supports networking and joint research activities focused on providing an enabling environment for and to promote airborne research. Examples of some of these recent activities will be shown EUFAR is currently seeking to establish itself as an AISBL (international non-profit association) to ensure its existence and operations beyond January 2018 when our present EC funding comes to an end. The objectives of the EUFAR AISBL will include continuing to develop the integration of the research aircraft community in Europe and also its links with other environmental research infrastructures, such as the community of research infrastructures under the umbrella of ENVRIplus. Another objective will be to continue to broaden access to research facilities beyond that supported solely by national funding streams so that EUFAR better approaches the status of a European open research infrastructure. Together with the implementation of an Open Access scheme by means of resource-sharing envisaged in late 2017, such a sustainable structure will contribute substantially toward broadening the user base of existing airborne research facilities in Europe and mobilising additional resources to this end. EUFAR AISBL will be the most appropriate organisation for the (i) coordination of joint activities among the European institutions involved in airborne research, and also (ii) coordination of projects funded by the European Commission or other bodies for supporting activities beyond the self-financing perimeter of the AISBL (transnational access projects, education and training events, joint research activities, etc.). This will confirm EUFAR's position as the key portal for airborne research in Europe. This central position opens the way for further collaboration with other communities (UAS, etc.) and environmental research infrastructures (IAGOS, ACTRIS, ENVRIplus, EUROFLEETS, etc.) to ensure the mutual benefit of joint efforts in addressing future science challenges in a multi-disciplinary approach to the study of the Earth system.

Comparative Study of 3-Dimensional Woven Joint Architectures for Composite Spacecraft Structures

NASA Technical Reports Server (NTRS)

Jones, Justin S.; Polis, Daniel L.; Rowles, Russell R.; Segal, Kenneth N.

2011-01-01

The National Aeronautics and Space Administration (NASA) Exploration Systems Mission Directorate initiated an Advanced Composite Technology (ACT) Project through the Exploration Technology Development Program in order to support the polymer composite needs for future heavy lift launch architectures. As an example, the large composite structural applications on Ares V inspired the evaluation of advanced joining technologies, specifically 3D woven composite joints, which could be applied to segmented barrel structures needed for autoclave cured barrel segments due to autoclave size constraints. Implementation of these 3D woven joint technologies may offer enhancements in damage tolerance without sacrificing weight. However, baseline mechanical performance data is needed to properly analyze the joint stresses and subsequently design/down-select a preform architecture. Six different configurations were designed and prepared for this study; each consisting of a different combination of warp/fill fiber volume ratio and preform interlocking method (Z-fiber, fully interlocked, or hybrid). Tensile testing was performed for this study with the enhancement of a dual camera Digital Image Correlation (DIC) system which provides the capability to measure full-field strains and three dimensional displacements of objects under load. As expected, the ratio of warp/fill fiber has a direct influence on strength and modulus, with higher values measured in the direction of higher fiber volume bias. When comparing the Z-fiber weave to a fully interlocked weave with comparable fiber bias, the Z-fiber weave demonstrated the best performance in two different comparisons. We report the measured tensile strengths and moduli for test coupons from the 6 different weave configurations under study.

Insights from the design and implementation of a single-entry model of referral for total joint replacement surgery: Critical success factors and unanticipated consequences.

PubMed

Damani, Zaheed; MacKean, Gail; Bohm, Eric; Noseworthy, Tom; Wang, Jenney Meng Han; DeMone, Brie; Wright, Brock; Marshall, Deborah A

2018-02-01

Single-entry models (SEMs) in healthcare allow patients to see the next-available provider and have been shown to improve waiting times, access and patient flow for preference-sensitive, scheduled services. The Winnipeg Central Intake Service (WCIS) for hip and knee replacement surgery was implemented to improve access in the Winnipeg Regional Health Authority. This paper describes the system's design/implementation; successes, challenges, and unanticipated consequences. On two occasions, during and following implementation, we interviewed all members of the WCIS project team, including processing engineers, waiting list coordinators, administrators and policy-makers regarding their experiences. We used semi-structured telephone interviews to collect data and qualitative thematic analysis to analyze and interpret the findings. Respondents indicated that the overarching objectives of the WCIS were being met. Benefits included streamlined processes, greater patient access, improved measurement and monitoring of outcomes. Challenges included low awareness, change readiness, and initial participation among stakeholders. Unanticipated consequences included workload increases, confusion around stakeholder expectations and under-reporting of data by surgeons' offices. Critical success factors for implementation included a requirement for clear communication, robust data collection, physician leadership and patience by all, especially implementation teams. Although successfully implemented, key lessons and critical success factors were learned related to change management, which if considered and applied, can reduce unanticipated consequences, improve uptake and benefit new models of care. Copyright © 2017 Elsevier B.V. All rights reserved.

Chrysler Upset Protrusion Joining Techniques for Joining Dissimilar Metals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Logan, Stephen

The project goal was to develop and demonstrate a robust, cost effective, and versatile joining technique, known as Upset Protrusion Joining (UPJ), for joining challenging dissimilar metal com-binations, especially those where one of the metals is a die cast magnesium (Mg) component. Since two of the key obstacles preventing more widespread use of light metals (especially in high volume automotive applications) are 1) a lack of robust joining techniques and 2) susceptibility to galvanic corrosion, and since the majority of the joint combinations evaluated in this project include die cast Mg (the lightest structural metal) as one of the twomore » materials being joined, and since die casting is the most common and cost effective process for producing Mg components, then successful project completion provides a key enabler to high volume application of lightweight materials, thus potentially leading to reduced costs, and encouraging implementation of lightweight multi-material vehicles for significant reductions in energy consumption and reduced greenhouse gas emissions. Eco-nomic benefits to end-use consumers are achieved primarily via the reduction in fuel consumption. Unlike currently available commercial processes, the UPJ process relies on a very robust mechanical joint rather than intermetallic bonding, so the more cathodic material can be coated prior to joining, thus creating a robust isolation against galvanic attack on the more anodic material. Additionally, since the UPJ protrusion is going through a hole that can be pre-drilled or pre-punched prior to coating, the UPJ process is less likely to damage the coating when the joint is being made. Further-more, since there is no additional cathodic material (such as a steel fastener) used to create the joint, there is no joining induced galvanic activity beyond that of the two parent materials. In accordance with its originally proposed plan, this project has successfully developed process variants of UPJ to enable joining of Mg die castings to aluminum (Al) and steel sheet components of various thicknesses, strengths and coating configurations. While most development focused on the simpler round boss version of the process, an additional phase of the work focused on devel-opment of an oval boss version to support applications with narrow flanges, while yet another vari-ant of the process, known as Upset Cast Riveting (UCR), was developed and evaluated for joining mixed metals that may not necessarily include Mg or Al die cast components. Although each varia-tion posed unique challenges described later in the report, all variations were successfully produced and evaluated, and each could be further developed for specific types of commercial applications. In this project, UPJ performed favorably against the benchmark self-pierce riveting (SPR) process in Mg AM60B to Al 6013 combinations although significant corrosion challenges were observed in both processes, especially for the bare Mg to bare Al configurations. Additional challenges were observed in joining Mg to steel with the UPJ process (SPR was not evaluated for this combination as it was not considered viable). To pass FCA’s specified corrosion tests with Mg/steel combina-tions, new steel treatments were evaluated, as well as adhesives and sealed edges. These showed significant improvement. In general, UPJ performed very well in Mg to Al 6016 combinations, even in corrosion evaluation of the bare Mg to bare Al configuration (again, SPR was not evaluated for this material combination as the 1.1 mm thick Al6016 sheet thickness was considered too thin for the SPR process). The improvement in corrosion performance of the Mg to Al 6016 combina-tion over the Mg to Al 6013 combination was thought to be a result of the lower copper content in the Al 6016 alloy. Oval boss joints showed substantial improvement in all joint strength criteria compared to 8.0-mm diameter round boss joints but were not evaluated for corrosion performance. The improved joint strength is likely a result of larger shear area. Cosmetic corrosion performance of all test assemblies (UPJ, UCR and SPR) was a challenge due to exposed edges and crevices al-lowing undercutting of the coatings. In real world component applications, the exposed edges, so prevalent on the joining test coupons, would be less prevalent and easier to protect.« less

Biomechanics of an orthosis-managed cranial cruciate ligament-deficient canine stifle joint predicted by use of a computer model.

PubMed

Bertocci, Gina E; Brown, Nathan P; Mich, Patrice M

2017-01-01

OBJECTIVE To evaluate effects of an orthosis on biomechanics of a cranial cruciate ligament (CrCL)-deficient canine stifle joint by use of a 3-D quasistatic rigid-body pelvic limb computer model simulating the stance phase of gait and to investigate influences of orthosis hinge stiffness (durometer). SAMPLE A previously developed computer simulation model for a healthy 33-kg 5-year-old neutered Golden Retriever. PROCEDURES A custom stifle joint orthosis was implemented in the CrCL-deficient pelvic limb computer simulation model. Ligament loads, relative tibial translation, and relative tibial rotation in the orthosis-stabilized stifle joint (baseline scenario; high-durometer hinge]) were determined and compared with values for CrCL-intact and CrCL-deficient stifle joints. Sensitivity analysis was conducted to evaluate the influence of orthosis hinge stiffness on model outcome measures. RESULTS The orthosis decreased loads placed on the caudal cruciate and lateral collateral ligaments and increased load placed on the medial collateral ligament, compared with loads for the CrCL-intact stifle joint. Ligament loads were decreased in the orthosis-managed CrCL-deficient stifle joint, compared with loads for the CrCL-deficient stifle joint. Relative tibial translation and rotation decreased but were not eliminated after orthosis management. Increased orthosis hinge stiffness reduced tibial translation and rotation, whereas decreased hinge stiffness increased internal tibial rotation, compared with values for the baseline scenario. CONCLUSIONS AND CLINICAL RELEVANCE Stifle joint biomechanics were improved following orthosis implementation, compared with biomechanics of the CrCL-deficient stifle joint. Orthosis hinge stiffness influenced stifle joint biomechanics. An orthosis may be a viable option to stabilize a CrCL-deficient canine stifle joint.

Education and Raising Awareness of Seismic Risk in the Black Sea Basin

NASA Astrophysics Data System (ADS)

Florin Balan, Stefan; Alcaz, Vasile; Trifonova, Petya; Uker, Nalan; Tataru, Dragos

2014-05-01

The Project "Black Sea Earthquake Safety Net(work)" ESNET has the intention to educate and raise awareness of seismic risk in the Black Sea Basin in four countries: Moldova, Romania, Bulgaria and Turkey. The project is financed through "The Black Sea Basin Joint Operational Programme", an EU operational programmes under European Neighborhood & Partnership Instrument (ENPI). The programme is financed by ENPI. The participation of Turkey is financed by Instrument for Pre-accession Assistance. It is implemented during the period 2007 - 2013. The project wants to contribute to the prevention of natural disasters generated by earthquakes in Black Sea Basin by developing a joint monitoring and intervention concept. All the countries involved in the project have their own studies, strategies, prevention and intervention systems in case of earthquakes, but until now there has not been an integrated approach so far in the Black Sea Basin. Given the cross-border character of seismic activity, it is necessary to have a cross-border approach on prevention, monitoring and intervention in case of earthquakes. Main objectives : 1. The assessment of the disaster potential, with accent on the seismic risk degree and the earthquakes effects in the intervention area. For achieving the main objective is to have an accurate and up-to-date assessment of the potential of disasters provoked by earthquakes in the project area/regions. This assessment will be carried out at national level and will be used in designing the common concept/approach for dealing with earthquakes at regional level, thus ensuring the cross-border character of the objective. 2.To develop an integrated seismic monitoring and intervention concept. This integrated concept, built on the basis of the previous objective, will have a cross-border relevance and is at the core of the action. The monitoring and intervention in case of earthquakes will be coordinated among the participating countries based on this, thus a more effective and efficient approach being ensured. 3. To increase the capacity of local institutions emergency intervention units for joint response activities in case of disasters. By involving the local emergency units and public administration in the project activities, especially in trainings, conferences and consultations, a better cooperation at cross-border level will be achieved. Step by step, the respective bodies will increase the cooperation and will benefit from each others expertise. Target groups : Research institutions and universities; Emergency intervention units; Local public authorities; NGOs. Final beneficiaries of the project: the population in the regions of the project. The project has a high educational perspective through its: a)training activities and b)training tools applied in the process. A) the training of 20 people from the emergency units from each country (80 in total) by experts in risk management. B) The Seismic Safety Web Portal of the project presenting all activities, maps and materials posted by members of the network agreement and not only. Also for changing expertise, opinions and long distance conferences is available a special software communication tool. An educational book is printed in 3 languages to be distributed in partner countries with main results.

[Effectiveness of a joint project between primary care and mental health to improve the recording of cardiovascular risk factors in patients with psychosis].

PubMed

Viñas Cabrera, Lidia; Fernández San-Martín, María Isabel; Martín López, Luis Miguel

2013-01-01

To evaluate the effectiveness of a joint team intervention between primary care (PC) and mental health (MH) to improve information on cardiovascular risk factors (CVRF) in psychotic patients. Multicenter before-after intervention study. Seven primary care and 2 mental health centers in Barcelona participated. All patients between 18-65 years old with a confirmed diagnosis of psychosis assigned to PC teams (n = 690) are included. Shared clinical sessions, developing a joint GP-MH protocol and implement it. Gender, age, number of Appointments per center/year, smoking, blood pressure, body mass index (BMI), total cholesterol, HDL cholesterol, triglycerides, glucose, waist circumference (WC), Cardiovascular Risk. Comparison of CVRF records from 2008 to 2010 using statistical tests for paired data. Calculation of CVRF prevalence in accordance with metabolic syndrome criteria and the criteria for referral to GP. The mean age was 42.3 (SD 11.4) years, with 67% males. All CVRF significantly Increased in clinical notes, particularly all blood test parameters and WC. More than 35% of patients had a CVRF according to metabolic syndrome criteria. Criteria to refer to PC physician (2010) identified: obesity 51.9%, 23.9% hypertension, high cholesterol 20.4% and 11.6% diabetes. CVRF recording improvement. High percentage of patients needed GP intervention due to a CVRF. Copyright © 2012 Elsevier España, S.L. All rights reserved.

U.S.-CHINA RADIOLOGICAL SOURCE SECURITY PROJECT: CONTINUING AND EXPANDING BILATERAL COOPERATION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhu, Zhixuan; Zhou, Qifu; Yang, Yaoyun

2009-10-07

The successful radiological security cooperation between the U.S. and China to secure at-risk sites near venues of the 2008 Beijing Summer Olympics has led to an expanded bilateral nonproliferation cooperation scope. The U.S. Department of Energy’s National Nuclear Security Administration, the Chinese Atomic Energy Authority and the China Ministry of Environmental Protection are continuing joint efforts to secure radiological sources throughout China under the U.S.-China Peaceful Uses of Nuclear Technology (PUNT) Agreement. Joint cooperation activities include physical security upgrades of sites with International Atomic Energy Agency (IAEA) Category 1 radiological sources, packaging, recovery, and storage of high activity transuranic andmore » beta gamma sources, and secure transportation practices for the movement of recovered sources. Expansion of cooperation into numerous provinces within China includes the use of integrated training workshops that will demonstrate methodologies and best practices between U.S. and Chinese radiological source security and recovery experts. The fiscal year 2009 expanded scope of cooperation will be conducted similar to the 2008 Olympic cooperation with the Global Threat Reduction Initiative taking the lead for the U.S., PUNT being the umbrella agreement, and Los Alamos, Sandia, and Oak Ridge National Laboratories operating as technical working groups. This paper outlines the accomplishments of the joint implementation and training efforts to date and discusses the possible impact on future U.S./China cooperation.« less

JPL Space Telecommunications Radio System Operating Environment

NASA Technical Reports Server (NTRS)

Lux, James P.; Lang, Minh; Peters, Kenneth J.; Taylor, Gregory H.; Duncan, Courtney B.; Orozco, David S.; Stern, Ryan A.; Ahten, Earl R.; Girard, Mike

2013-01-01

A flight-qualified implementation of a Software Defined Radio (SDR) Operating Environment for the JPL-SDR built for the CoNNeCT Project has been developed. It is compliant with the NASA Space Telecommunications Radio System (STRS) Architecture Standard, and provides the software infrastructure for STRS compliant waveform applications. This software provides a standards-compliant abstracted view of the JPL-SDR hardware platform. It uses industry standard POSIX interfaces for most functions, as well as exposing the STRS API (Application Programming In terface) required by the standard. This software includes a standardized interface for IP components instantiated within a Xilinx FPGA (Field Programmable Gate Array). The software provides a standardized abstracted interface to platform resources such as data converters, file system, etc., which can be used by STRS standards conformant waveform applications. It provides a generic SDR operating environment with a much smaller resource footprint than similar products such as SCA (Software Communications Architecture) compliant implementations, or the DoD Joint Tactical Radio Systems (JTRS).

Radioactive Waste Management at the New Conversion Facility of 'TVEL'{sup R} Fuel Company - 13474

DOE Office of Scientific and Technical Information (OSTI.GOV)

Indyk, S.I.; Volodenko, A.V.; Tvilenev, K.A.

2013-07-01

The project on the new conversion facility construction is being implemented by Joint Stock Company (JSC) 'Siberian Group of Chemical Enterprises' (SGChE) within TVEL{sup R} Fuel Company. The objective is to construct the up-to-date facility ensuring the industrial and environmental safety with the reduced impact on the community and environment in compliance with the Russian new regulatory framework on radioactive waste (RW) management. The history of the SGChE development, as well as the concepts and approaches to RW management implemented by now are shown. The SGChE future image is outlined, together with its objectives and concept on RW management inmore » compliance with the new act 'On radioactive waste management' adopted in Russia in 2011. Possible areas of cooperation with international companies are discussed in the field of RW management with the purpose of deploying the best Russian and world practices on RW management at the new conversion facility. (authors)« less

7 CFR 550.16 - Project development.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 6 2010-01-01 2010-01-01 false Project development. 550.16 Section 550.16 Agriculture... § 550.16 Project development. REE provides partial funding to Cooperators to support research projects... the REE Agency's ADODR shall jointly develop the following documentation: (a) Project plan. A plan...

7 CFR 550.16 - Project development.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 6 2014-01-01 2014-01-01 false Project development. 550.16 Section 550.16 Agriculture... § 550.16 Project development. REE provides partial funding to Cooperators to support research projects... the REE Agency's ADODR shall jointly develop the following documentation: (a) Project plan. A plan...

7 CFR 550.16 - Project development.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 6 2013-01-01 2013-01-01 false Project development. 550.16 Section 550.16 Agriculture... § 550.16 Project development. REE provides partial funding to Cooperators to support research projects... the REE Agency's ADODR shall jointly develop the following documentation: (a) Project plan. A plan...

Biplanar x-ray fluoroscopy for sacroiliac joint fusion.

PubMed

Vanaclocha-Vanaclocha, Vicente; Verdú-López, Francisco; Sáiz-Sapena, Nieves; Herrera, Juan Manuel; Rivera-Paz, Marlon

2016-07-01

Chronic pain originating from the sacroiliac joint (SI) can cause severe dysfunction. Although many patients respond to conservative management with NSAIDs, some do need further treatment in the form of SI joint fusion (SIJF). To achieve safe and successful SIJF, intraoperative x-ray fluoroscopy is mandatory to avoid serious damages to nearby vascular and neural structures. Each step of the procedure has to be confirmed by anteroposterior (AP) and lateral projections. With a single-arm x-ray, the arch has to be moved back and forth for the AP and lateral projections, and this lengthens the procedure. To achieve the same results in less time, the authors introduced simultaneous biplanar fluoroscopy with 2 x-ray arches. After the patient is positioned prone with the legs spread apart in the so-called Da Vinci position, one x-ray arch for the lateral projection is placed at a right angle to the patient, and a second x-ray machine is placed with its arch between the legs of the patient. This allows simultaneous AP and lateral x-ray projections and, in the authors' hands, markedly speeds up the procedure. Biplanar fluoroscopy allows excellent AP and lateral projections to be made quickly at any time during the surgical procedure. This is particularly useful in cases of bilateral SI joint fusion if both sides are done at the same time. The video can be found here: https://youtu.be/TX5gz8c765M .

Direct adaptive control of a PUMA 560 industrial robot

NASA Technical Reports Server (NTRS)

Seraji, Homayoun; Lee, Thomas; Delpech, Michel

1989-01-01

The implementation and experimental validation of a new direct adaptive control scheme on a PUMA 560 industrial robot is described. The testbed facility consists of a Unimation PUMA 560 six-jointed robot and controller, and a DEC MicroVAX II computer which hosts the Robot Control C Library software. The control algorithm is implemented on the MicroVAX which acts as a digital controller for the PUMA robot, and the Unimation controller is effectively bypassed and used merely as an I/O device to interface the MicroVAX to the joint motors. The control algorithm for each robot joint consists of an auxiliary signal generated by a constant-gain Proportional plus Integral plus Derivative (PID) controller, and an adaptive position-velocity (PD) feedback controller with adjustable gains. The adaptive independent joint controllers compensate for the inter-joint couplings and achieve accurate trajectory tracking without the need for the complex dynamic model and parameter values of the robot. Extensive experimental results on PUMA joint control are presented to confirm the feasibility of the proposed scheme, in spite of strong interactions between joint motions. Experimental results validate the capabilities of the proposed control scheme. The control scheme is extremely simple and computationally very fast for concurrent processing with high sampling rates.

Use of GPM Data Products in SERVIR Hydrological Applications

NASA Astrophysics Data System (ADS)

Limaye, A. S.; Mithieu, F.; Gurung, D. R.; Blankenship, C. B.; Crosson, W. L.; Anderson, E. R.; Flores, A.; Delgado, F.; Stanton, K.; Irwin, D.

2015-12-01

Availability of reliable precipitation data is a major challenge for SERVIR, a joint USAID-NASA project aimed at improving the environmental decision-making capacity of developing countries. GPM data products are fulfilling that challenge through frequent, high spatial resolution precipitation products over regional scales. SERVIR is using the products in different ways. First, SERVIR is using those in hydrologic modeling over Eastern Africa and in Hindu Kush Himalaya. SERVIR's distributed hydrologic modeling capability is helping the hydrological and meteorological departments in SERVIR regions, or Hubs, identify local watershed deserving immediate attention - such as recurring floods. Additionally, SERVIR technical implementers in the Hubs are building capacities of the departments and ministries in their member countries to effectively use the GPM products. SERVIR also provides an easy access for efficient integration of GPM products in web map services. This presentation will highlight ongoing collaborations and results generated through collaborative partnership among the water resources and hydrometeorology departments in Kenya, Uganda, Rwanda, Namibia, and Bhutan, SERVIR Hubs, and SERVIR Applied Sciences Team projects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schalkoff, R.J.

This report summarizes work after 4 years of a 3-year project (no-cost extension of the above-referenced project for a period of 12 months granted). The fourth generation of a vision sensing head for geometric and photometric scene sensing has been built and tested. Estimation algorithms for automatic sensor calibration updating under robot motion have been developed and tested. We have modified the geometry extraction component of the rendering pipeline. Laser scanning now produces highly accurate points on segmented curves. These point-curves are input to a NURBS (non-uniform rational B-spline) skinning procedure to produce interpolating surface segments. The NURBS formulation includesmore » quadrics as a sub-class, thus this formulation allows much greater flexibility without the attendant instability of generating an entire quadric surface. We have also implemented correction for diffuse lighting and specular effects. The QRobot joint level control was extended to a complete semi-autonomous robot control system for D and D operations. The imaging and VR subsystems have been integrated and tested.« less

Exchange of Computable Patient Data between the Department of Veterans Affairs (VA) and the Department of Defense (DoD): Terminology Mediation Strategy

PubMed Central

Bouhaddou, Omar; Warnekar, Pradnya; Parrish, Fola; Do, Nhan; Mandel, Jack; Kilbourne, John; Lincoln, Michael J.

2008-01-01

Complete patient health information that is available where and when it is needed is essential to providers and patients and improves healthcare quality and patient safety. VA and DoD have built on their previous experience in patient data exchange to establish data standards and terminology services to enable real-time bi-directional computable (i.e., encoded) data exchange and achieve semantic interoperability in compliance with recommended national standards and the eGov initiative. The project uses RxNorm, UMLS, and SNOMED CT terminology standards to mediate codified pharmacy and allergy data with greater than 92 and 60 percent success rates respectively. Implementation of the project has been well received by users and is being expanded to multiple joint care sites. Stable and mature standards, mediation strategies, and a close relationship between healthcare institutions and Standards Development Organizations are recommended to achieve and maintain semantic interoperability in a clinical setting. PMID:18096911

Continuous integration for concurrent MOOSE framework and application development on GitHub

DOE PAGES

Slaughter, Andrew E.; Peterson, John W.; Gaston, Derek R.; ...

2015-11-20

For the past several years, Idaho National Laboratory’s MOOSE framework team has employed modern software engineering techniques (continuous integration, joint application/framework source code repos- itories, automated regression testing, etc.) in developing closed-source multiphysics simulation software (Gaston et al., Journal of Open Research Software vol. 2, article e10, 2014). In March 2014, the MOOSE framework was released under an open source license on GitHub, significantly expanding and diversifying the pool of current active and potential future contributors on the project. Despite this recent growth, the same philosophy of concurrent framework and application development continues to guide the project’s development roadmap. Severalmore » specific practices, including techniques for managing multiple repositories, conducting automated regression testing, and implementing a cascading build process are discussed in this short paper. Furthermore, special attention is given to describing the manner in which these practices naturally synergize with the GitHub API and GitHub-specific features such as issue tracking, Pull Requests, and project forks.« less

Continuous integration for concurrent MOOSE framework and application development on GitHub

DOE Office of Scientific and Technical Information (OSTI.GOV)

Slaughter, Andrew E.; Peterson, John W.; Gaston, Derek R.

For the past several years, Idaho National Laboratory’s MOOSE framework team has employed modern software engineering techniques (continuous integration, joint application/framework source code repos- itories, automated regression testing, etc.) in developing closed-source multiphysics simulation software (Gaston et al., Journal of Open Research Software vol. 2, article e10, 2014). In March 2014, the MOOSE framework was released under an open source license on GitHub, significantly expanding and diversifying the pool of current active and potential future contributors on the project. Despite this recent growth, the same philosophy of concurrent framework and application development continues to guide the project’s development roadmap. Severalmore » specific practices, including techniques for managing multiple repositories, conducting automated regression testing, and implementing a cascading build process are discussed in this short paper. Furthermore, special attention is given to describing the manner in which these practices naturally synergize with the GitHub API and GitHub-specific features such as issue tracking, Pull Requests, and project forks.« less

Joint Polar Satellite System (JPSS) Micrometeoroid and Orbital Debris (MMOD) Assessment

NASA Technical Reports Server (NTRS)

Squire, Michael D.; Cooke, William J.; Williamsen, Joel; Kessler, Donald; Vesely, William E.; Hull, Scott H.; Schonberg, William; Peterson, Glenn E.; Jenkin, Alan B.; Cornford, Steven L.

2015-01-01

The Joint Polar Satellite System (JPSS) Project requested the NASA Engineering and Safety Center (NESC) conduct an independent evaluation of the Micrometeoroid and Orbital Debris (MMOD) models used in the latest JPSS MMOD risk assessment. The principal focus of the assessment was to compare Orbital Debris Engineering Model version 3 (ORDEM 3.0) with the Meteoroid and Space Debris Terrestrial Environment Reference version 2009 (MASTER-2009) and Aerospace Debris Environment Projection Tool (ADEPT) and provide recommendations to the JPSS Project regarding MMOD protection. The outcome of the NESC assessment is contained in this report.

[On practicability of implementing the speciality "podiatry" in traumatology and orthopedics].

PubMed

2011-01-01

The absence of single opinion concerning the classification of foot and ankle joint pathology does not permit to formulate universal and practical approach to the identification of pathological syndromes in case of patient foot lesion. The situation is aggravated by the unsolved issues related to the terminological definition of podiatry as a direction in orthopedics to solve the issues of foot and ankle joint pathology. In actual conditions the implementation of new technologies into the structure of traumatological orthopedics care is needed. This approach permits to combine the qualities of models of effective and optimized care to patients with foot and ankle joint pathology. The study of issue related to the systematization of podiatric pathology revealed that actually no single universal classification easy-to-use in practice exists. Hence the development of original applied working scheme of foot and ankle joint pathology is proposed.

Implementation of Kane's Method for a Spacecraft Composed of Multiple Rigid Bodies

NASA Technical Reports Server (NTRS)

Stoneking, Eric T.

2013-01-01

Equations of motion are derived for a general spacecraft composed of rigid bodies connected via rotary (spherical or gimballed) joints in a tree topology. Several supporting concepts are developed in depth. Basis dyads aid in the transition from basis-free vector equations to component-wise equations. Joint partials allow abstraction of 1-DOF, 2-DOF, 3-DOF gimballed and spherical rotational joints to a common notation. The basic building block consisting of an "inner" body and an "outer" body connected by a joint enables efficient organization of arbitrary tree structures. Kane's equation is recast in a form which facilitates systematic assembly of large systems of equations, and exposes a relationship of Kane's equation to Newton and Euler's equations which is obscured by the usual presentation. The resulting system of dynamic equations is of minimum dimension, and is suitable for numerical solution by computer. Implementation is ·discussed, and illustrative simulation results are presented.

75 FR 14190 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Joint Venture To...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-24

... DEPARTMENT OF JUSTICE Antitrust Division Notice Pursuant to the National Cooperative Research and Production Act of 1993--Joint Venture To Perform Project Entitled Robotic Rehabilitation of Aging Water... Cooperative Research and Production Act of 1993, 15 U.S.C. 4301 et sect. (``the Act''), Joint [[Page 14191...

JANUS: Joint Academic Network Using Satellite. Brief Description of Project. IET Papers on Broadcasting: No. 287.

ERIC Educational Resources Information Center

Bates, A. W.

The JANUS (Joint Academic Network Using Satellite) satellite network is being planned to link European institutions wishing to jointly produce distance teaching materials. Earth stations with capabilities for transmit/receive functions, voice/data functions, two 64 kbs channels, and connection to local telephone exchange and computer networks will…

Apollo Soyuz mission planning and operations

NASA Technical Reports Server (NTRS)

Frank, M. P., III

1976-01-01

The paper describes the Apollo Soyuz project from the points of view of working group organization, mission plan definition, joint operations concept, and mission preparation. The concept for joint operations considered contingency situations as well as nominal operations. Preparations for the joint flight included cooperative tracking tests and combined training of the flight crews and mission control personnel.

The Department of Defense’s Transition of Program of Record (POR) Systems from Internet Protocol Version Four (IPv4) to Internet Protocol Version Six (IPv6)

DTIC Science & Technology

2006-12-01

Robert N. Beck, Dean Graduate School of Business and Public Policy iv THIS PAGE INTENTIONALLY...THIS PAGE INTENTIONALLY LEFT BLANK vii TABLE OF CONTENTS I. GRADUATE SCHOOL OF BUSINESS & PUBLIC POLICY JOINT...Warfighter Information Network – Tactical 1 I. GRADUATE SCHOOL OF BUSINESS & PUBLIC POLICY JOINT APPLIED PROJECT PLAN A. TENTATIVE PROJECT TITLE

Department of Energy Efforts to Promote Universal Adherence to the IAEA Additional Protocol

DOE Office of Scientific and Technical Information (OSTI.GOV)

Killinger, Mark H.; Hansen, Linda H.; Kovacic, Don N.

2009-10-06

Entry-into-force of the U.S. Additional Protocol (AP) in January 2009 continues to demonstrate the ongoing commitment by the United States to promote universal adherence to the AP. The AP is a critical tool for improving the International Atomic Energy Agency’s (IAEA) capabilities to detect undeclared activities that indicate a clandestine nuclear weapons program. This is because States Parties are required to provide information about, and access to, nuclear fuel cycle activities beyond their traditional safeguards reporting requirements. As part of the U.S. AP Implementation Act and Senate Resolution of Ratification, the Administration is required to report annually to Congress onmore » measures taken to achieve the adoption of the AP in non-nuclear weapon states, as well as assistance to the IAEA to promote the effective implementation of APs in those states. A key U.S. effort in this area is being managed by the International Nuclear Safeguards and Engagement Program (INSEP) of the U.S. Department of Energy (DOE). Through new and existing bilateral cooperation agreements, INSEP has initiated technical assistance projects for AP implementation with selected non-weapon states. States with which INSEP is currently cooperating include Vietnam and Thailand, with Indonesia, Algeria, Morocco, and other countries as possible future collaborators in the area of AP implementation. The INSEP collaborative model begins with a joint assessment with our partners to identify specific needs they may have regarding entering the AP into force and any impediments to successful implementation. An action plan is then developed detailing and prioritizing the necessary joint activities. Such assistance may include: advice on developing legal frameworks and regulatory documents; workshops to promote understanding of AP requirements; training to determine possible declarable activities; assistance in developing a system to collect and submit declarations; performing industry outreach to raise awareness; guidance for reporting export and manufacturing of “especially designed or prepared” equipment listed in AP Annex I/Annex II; and lastly, developing indigenous capabilities to sustain AP implementation. INSEP also coordinates with the IAEA to ensure the harmonization of the assistance provided by DOE and the IAEA. This paper describes current efforts and future plans for AP international implementation support.« less

Synergistic Approach Integrating Joint Capabilities for USSOCOM Contingency Contracting: Construction Management Module

DTIC Science & Technology

2010-12-01

59 a. The Joint Uniform Lessons Learned System (JULLS) .........59 b. Acquisition Community Connection (ACC) ..........................59 c...Report ACC Acquisition Community Connection ADDIE Analyze, Design, Develop, Implement, Evaluate AFFARS Air Force Federal Acquisition Regulation...Operations J4 Logistics J5 Plans J6 Communications J8 Programming and Comptroller J&A Justification and Approval JARB Joint Acquisition

Bird Habitat Conservation at Various Scales in the Atlantic Coast Joint Venture

Treesearch

Andrew Milliken; Craig Watson; Chuck Hayes

2005-01-01

The Atlantic Coast Joint Venture is a partnership focused on the conservation of habitats for migratory birds within the Atlantic Flyway/Atlantic Coast Region from Maine south to Puerto Rico. In order to be effective in planning and implementing conservation in this large and diverse area, the joint venture must work at multiple spatial scales, from the largest ?...

Alternatives to Full-Depth Patching on Resurfacing Projects

DOT National Transportation Integrated Search

1993-09-01

The vast majority of Illinois' non-interstate network is constructed of jointed Portland cement concrete (PCC). Typically, Illinois' first significant rehabilitation efforts for jointed PCC pavements are in the form of full-depth bituminous concrete ...

Helicopter Surveys for Locating Wells and Leaking Oilfield Infrastructure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hammack, R.W.; Veloski, G.A.; Hodges, G.

2006-10-01

Prior to the injection of CO2 into geological formations, either for enhanced oil recovery or for CO2 sequestration, it is necessary to locate wells that perforate the target formation and are within the radius of influence for planned injection wells. Locating and plugging wells is necessary because improperly plugged well bores provide the most rapid route for CO2 escape to the surface. This paper describes the implementation and evaluation of helicopter and ground-based well detection strategies at a 100+ year old oilfield in Wyoming where a CO2 flood is planned. This project was jointly funded by the U.S. Department ofmore » Energy’s National Energy Technology Laboratory and Fugro Airborne Surveys« less

Composite Matrix Cooling Scheme for Small Gas Turbine Combustors

NASA Technical Reports Server (NTRS)

Paskin, Marc D.; Ross, Phillip T.; Mongia, Hukam C.; Acosta, Waldo A.

1990-01-01

The design, manufacture, and testing of a compliant metal/ceramic (CMC) wall cooling concept-implementing combustor for small gas turbine engines has been undertaken by a joint U.S. Army/NASA technology development program. CMC in principle promises greater wall cooling effectiveness than conventional designs and materials, thereby facilitating a substantial reduction in combustor cooling air requirements and furnishing greater airflow for the control of burner outlet temperature patterns as well as improving thermodynamic efficiency and reducing pollutant emissions and smoke levels. Rig test results have confirmed the projected benefits of the CMC concept at combustor outlet temperatures of the order of 2460 F, at which approximately 80 percent less cooling air than conventionally required was being employed by the CMC combustor.

NASA's International Lunar Network Anchor Nodes and Robotic Lunar Lander Project Update

NASA Technical Reports Server (NTRS)

Morse, Brian J.; Reed, Cheryl L. B.; Kirby, Karen W.; Cohen, Barbara A.; Bassler, Julie A.; Harris, Danny W.; Chavers, D. Gregory

2010-01-01

In early 2008, NASA established the Lunar Quest Program, a new lunar science research program within NASA s Science Mission Directorate. The program included the establishment of the anchor nodes of the International Lunar Network (ILN), a network of lunar science stations envisioned to be emplaced by multiple nations. This paper describes the current status of the ILN Anchor Nodes mission development and the lander risk-reduction design and test activities implemented jointly by NASA s Marshall Space Flight Center and The Johns Hopkins University Applied Physics Laboratory. The lunar lander concepts developed by this team are applicable to multiple science missions, and this paper will describe a mission combining the functionality of an ILN node with an investigation of lunar polar volatiles.

[Prevalence of Obstructive Sleep Apnea Syndrome among holders of a category B driver's license and among professionals in the Province of Pesaro-Urbino (Italy)].

PubMed

Vittoria, Emanuela; Sisti, Davide; Pascucci, Paolo; Carlotti, Eugenio; Cappelli, Giorgio; Grossi, Paola

2017-01-01

Obstructive Sleep Apnea Syndrome (OSAS) is a sleeping disorder caused by repeated episodes of partial or complete obstruction of the upper airways during sleep. During 2013, a pilot project was performed in the Marche region (Italy), co-jointly by the University "Politecnica delle Marche" and the Italian National Institute of Work Accident Insurance (INAIL), among holders of a category "B" driver's licence and among professionals undergoing screening at an Occupational Medicine Service covering the Province of Pesaro-Urbino (Italy). Nineteen percent of 553 subjects undergoing a screening examination were found to be affected by OSAS. The data collected is of great interest in the phase of implementation of new national laws.

Linear feature projection-based real-time decoding of limb state from dorsal root ganglion recordings.

PubMed

Han, Sungmin; Chu, Jun-Uk; Park, Jong Woong; Youn, Inchan

2018-05-15

Proprioceptive afferent activities recorded by a multichannel microelectrode have been used to decode limb movements to provide sensory feedback signals for closed-loop control in a functional electrical stimulation (FES) system. However, analyzing the high dimensionality of neural activity is one of the major challenges in real-time applications. This paper proposes a linear feature projection method for the real-time decoding of ankle and knee joint angles. Single-unit activity was extracted as a feature vector from proprioceptive afferent signals that were recorded from the L7 dorsal root ganglion during passive movements of ankle and knee joints. The dimensionality of this feature vector was then reduced using a linear feature projection composed of projection pursuit and negentropy maximization (PP/NEM). Finally, a time-delayed Kalman filter was used to estimate the ankle and knee joint angles. The PP/NEM approach had a better decoding performance than did other feature projection methods, and all processes were completed within the real-time constraints. These results suggested that the proposed method could be a useful decoding method to provide real-time feedback signals in closed-loop FES systems.

Acceleration and torque feedback for robotic control - Experimental results

NASA Technical Reports Server (NTRS)

Mclnroy, John E.; Saridis, George N.

1990-01-01

Gross motion control of robotic manipulators typically requires significant on-line computations to compensate for nonlinear dynamics due to gravity, Coriolis, centripetal, and friction nonlinearities. One controller proposed by Luo and Saridis avoids these computations by feeding back joint acceleration and torque. This study implements the controller on a Puma 600 robotic manipulator. Joint acceleration measurement is obtained by measuring linear accelerations of each joint, and deriving a computationally efficient transformation from the linear measurements to the angular accelerations. Torque feedback is obtained by using the previous torque sent to the joints. The implementation has stability problems on the Puma 600 due to the extremely high gains inherent in the feedback structure. Since these high gains excite frequency modes in the Puma 600, the algorithm is modified to decrease the gain inherent in the feedback structure. The resulting compensator is stable and insensitive to high frequency unmodeled dynamics. Moreover, a second compensator is proposed which uses acceleration and torque feedback, but still allows nonlinear terms to be fed forward. Thus, by feeding the increment in the easily calculated gravity terms forward, improved responses are obtained. Both proposed compensators are implemented, and the real time results are compared to those obtained with the computed torque algorithm.

Design and development of an intelligent nursing bed - a pilot project of "joint assignment".

PubMed

Jiehui Jiang; Tingwei Liu; Yuting Zhang; Yu Song; Mi Zhou; Xiaosong Zheng; Zhuangzhi Yan

2017-07-01

The "joint assignment" is a creative bachelor education project for Biomedical Engineering (BME) in Shanghai University (SHU), China. The objective of this project is to improve students' capabilities in design thinking and teamwork through practices in the process of the design and development of complex medical product. As the first step, a pilot project "design and development of intelligent nursing bed" was set up in May 2015. This paper describes details of how project organization and management, various teaching methods and scientific evaluation approaches were achieved in this pilot project. For example, a method containing one main line and four branches is taken to manage the project and "prototyping model" was used as the main research approach. As a result a multi-win situation was achieved. The results showed, firstly, 62 bachelor students including 16 BME students were well trained. They improved themselves in use of practical tools, communication skills and scientific writing; Secondly, commercial companies received a nice product design on intelligent nursing bed, and have been working on industrializing it; Thirdly, the university and associated schools obtained an excellent practical education experience to supplement traditional class education; Fourthly and most importantly, requirements from end-users will be met. The results also showed that the "joint assignment" task could become a significant component in BME bachelor education.

Specific issues, exact locations: case study of a community mapping project to improve safety in a disadvantaged community.

PubMed

Qummouh, Rana; Rose, Vanessa; Hall, Pat

2012-12-01

Safety is a health issue and a significant concern in disadvantaged communities. This paper describes an example of community-initiated action to address perceptions of fear and safety in a suburb in south-west Sydney which led to the development of a local, community-driven research project. As a first step in developing community capacity to take action on issues of safety, a joint resident-agency group implemented a community safety mapping project to identify the extent of safety issues in the community and their exact geographical location. Two aerial maps of the suburb, measuring one metre by two metres, were placed on display at different locations for four months. Residents used coloured stickers to identify specific issues and exact locations where crime and safety were a concern. Residents identified 294 specific safety issues in the suburb, 41.9% (n=123) associated with public infrastructure, such as poor lighting and pathways, and 31.9% (n=94) associated with drug-related issues such as drug activity and discarded syringes. Good health promotion practice reflects community need. In a very practical sense, this project responded to community calls for action by mapping resident knowledge on specific safety issues and exact locations and presenting these maps to local decision makers for further action.

Design and technical support for development of a molded fabric space suit joint

NASA Technical Reports Server (NTRS)

Olson, L. Howard

1994-01-01

NASA Ames Research Center has under design a new joint or element for use in a space suit. The design concept involves molding a fabric to a geometry developed at Ames. Unusual characteristics of this design include the need to produce a fabric molding draw ratio on the order of thirty percent circumferentially on the surface. Previous work done at NASA on molded fabric joints has shown that standard, NASA qualified polyester fabrics as are currently available in the textile industry for use in suits have a maximum of about fifteen percent draw ratio. NASA has done the fundamental design for a prototype joint and of a mold which would impart the correct shape to the fabric support layer of the joint. NASA also has the capability to test a finished product for suitability and reliability. Responsibilities resting with Georgia Tech in the design effort for this project are textile related, namely fiber selection, fabric design to achieve the properties of the objective design, and determining production means and sources for the fabrics. The project goals are to produce a prototype joint using the NASA design for evaluation of effectiveness by NASA, and to establish the sources and specifications which would allow reliable and repeatable production of the joint.

Joint-operation in water resources project in Indonesia: Integrated or non-integrated

NASA Astrophysics Data System (ADS)

Ophiyandri, Taufika; Istijono, Bambang; Hidayat, Benny

2017-11-01

The construction of large water resources infrastructure project often involved a joint-operation (JO) project between two or more construction companies. The form of JO can be grouped into two categories - an integrated type and a non-integrated type. This paper investigates the reason of forming a JO project made by companies. The specific advantages and problems of JO project is also analysed in this paper. In order to achieve the objectives, three water resources infrastructure projects were selected as case studies. Data was gathered by conducting 11 semi-structured interviews to project owners, contractor managers, and project staffs. Data was analysed by means of content analysis. It was found that the most fundamental factor to form a JO is to win a competition or tender. An integrated model is in favour because it can reduce overhead costs and has a simple management system, while a non-integrated model is selected because it can avoid a sleeping partner and make contractor more responsible for their own job.

Experience of international collaboration in preparation of masters in “Mechatronics” with call for funds from Tempus and Erasmus programs

NASA Astrophysics Data System (ADS)

Zhmud, V. A.; Frantsuzova, G. A.; Dimitrov, L. V.; Nosek, J.

2018-05-01

This paper reveals the main problems of creating and implementing double diploma programs between universities of Russia and Europe. Novosibirsk State Technical University implements such programs with Technical Universities of Sofia (Bulgaria) and Liberec (Czech Republic). The paper presents the latest results of this activity and discusses the possibilities of its development in the field of joint postgraduate training, as well as joint scientific research with the involvement of students and postgraduate.

[The two-year post graduate training program for nurses: implementation status and personal perspectives].

PubMed

Yin, Yu-Chun

2013-06-01

The Taiwan Joint Commission on Hospital Accreditation (TJCHA) authorized the Teaching Quality Improvement Program for Teaching Hospitals as a way for the Department of Health to plan and implement improvements. The program assists medical and paramedical professionals to establish a postgraduate clinical training system. The two-year postgraduate training program for nurses is one of the program's regular activities, divided into three phases that include location-based curriculum training (3 months), core curriculum training (9 months), and professional courses training (12 months). This paper describes the origin, current implementation status, and efficacy / key problems of this two-year post graduate training program, Information regarding the opinions of new nurses, preceptors, and nursing managers on the three aspects is drawn from the author's relevant professional experience, interactions with nurses, and a review of the literature. Findings include: (1) nursing departments should operate in accordance with TJCHA guidelines; (2) department training should be adequate to promote the ability and willingness of nurses to train a new generation of clinical preceptors; and (3) participant opinions on project execution progress and difficulties. Findings may be referenced to better achieve Teaching Quality Improvement Program for Teaching Hospital objectives.

76 FR 81962 - Notice of Public Meeting: Joint Session of Northeast California Resource Advisory Council and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-29

... wild horse and burro management and wind energy development proposals. Agenda items for the joint... for the Northwest California RAC include the Walker Ridge wind energy project, wilderness management...

LTPP pavement maintenance materials : SHRP joint reseal experiment, final report.

DOT National Transportation Integrated Search

1999-09-01

The Strategic Highway Research Program (SHRP) H-106 maintenance experiment and the Federal Highway : Administration (FHWA) Long-Term Monitoring (LTM) of Pavement Maintenance Materials Test Sites project studied : the resealing of joints in concrete p...

Evaluation of the finite element software ABAQUS for biomechanical modelling of biphasic tissues.

PubMed

Wu, J Z; Herzog, W; Epstein, M

1998-02-01

The biphasic cartilage model proposed by Mow et al. (1980) has proven successful to capture the essential mechanical features of articular cartilage. In order to analyse the joint contact mechanics in real, anatomical joints, the cartilage model needs to be implemented into a suitable finite element code to approximate the irregular surface geometries of such joints. However, systematic and extensive evaluation of the capacity of commercial software for modelling the contact mechanics with biphasic cartilage layers has not been made. This research was aimed at evaluating the commercial finite element software ABAQUS for analysing biphasic soft tissues. The solutions obtained using ABAQUS were compared with those obtained using other finite element models and analytical solutions for three numerical tests: an unconfined indentation test, a test with the contact of a spherical cartilage surface with a rigid plate, and an axi-symmetric joint contact test. It was concluded that the biphasic cartilage model can be implemented into the commercial finite element software ABAQUS to analyse practical joint contact problems with biphasic articular cartilage layers.

The role of a creative "joint assignment" project in biomedical engineering bachelor degree education.

PubMed

Jiehui Jiang; Yuting Zhang; Mi Zhou; Xiaosong Zheng; Zhuangzhi Yan

2017-07-01

Biomedical Engineering (BME) bachelor education aims to train qualified engineers who devote themselves to addressing biological and medical problems by integrating the technological, medical and biological knowledge. Design thinking and teamwork with other disciplines are necessary for biomedical engineers. In the current biomedical engineering education system of Shanghai University (SHU), however, such design thinking and teamwork through a practical project is lacking. This paper describes a creative "joint assignment" project in Shanghai University, China, which has provided BME bachelor students a two-year practical experience to work with students from multidisciplinary departments including sociology, mechanics, computer sciences, business and art, etc. To test the feasibility of this project, a twenty-month pilot project has been carried out from May 2015 to December 2016. The results showed that this pilot project obviously enhanced competitive power of BME students in Shanghai University, both in the capabilities of design thinking and teamwork.

The Joint Facial and Invasive Neck Trauma (J-FAINT) Project, Iraq and Afghanistan 2003-2011

DTIC Science & Technology

2013-01-01

Original Research— Facial Plastic and Reconstructive Surgery The Joint Facial and Invasive Neck Trauma (J-FAINT) Project, Iraq and Afghanistan 2003...number and type of facial and penetrat- ing neck trauma injuries sustained in Operation Iraqi Freedom (OIF) and Operation Enduring Freedom (OEF). Study...queried for data from OIF and OEF from January 2003 to May 2011. Information on demographics; type and severity of facial , neck, and associated trauma

New Collaboration Among Geodesy Data Centers in Europe and the US Facilitates Data Discovery and Access

NASA Astrophysics Data System (ADS)

Boler, F. M.; Wier, S.; D'Agostino, N.; Fernandes, R. M.; Ganas, A.; Bruyninx, C.

2013-12-01

COOPEUS, the European Union project to strengthen the cooperation between the US and the EU in the field of environmental research infrastructures, is linking the US NSF-supported geodesy Facility at UNAVCO with the European Plate Observing System (EPOS) in joint research infrastructure enhancement activities that will ultimately advance international geodesy data discovery and access. (COOPEUS also links a broad set of additional EU and US based Earth, oceans, and environmental science research entities in joint research infrastructure enhancement activities.) The UNAVCO Data Center in Boulder, Colorado, archives for preservation and distributes geodesy data and products, including hosting GNSS data from 2,500 continuously operating stations around the globe. UNAVCO is only one of several hundred data centers worldwide hosting GNSS data, which are valuable for scientific research, education, hazards assessment and monitoring, and emergency management. However, the disparate data holdings structures, metadata encodings, and infrastructures at these data centers represent a significant obstacle to use by scientists, government entities, educators and the public. Recently a NASA-funded project at UNAVCO and two partner geodesy data centers in the US (CDDIS and SOPAC) has successfully designed and implemented software for simplified data search and access called the Geodesy Seamless Archive Centers (GSAC). GSAC is a web services based technology that is intended to be simple to install and run for most geodesy data centers. The GSAC services utilize a repository layer and a service layer to identify and present both the required metadata elements along with any data center-specific services and capabilities. In addition to enabling web services and related capabilities at the data center level, GSAC repository code can be implemented to federate two or more GSAC-enabled data centers wishing to present a unified search and access capability to their user community. GSAC services and a federated implementation have been in operation at the three US data centers. In Europe, several institutions that are part of EPOS including University of Beira Interior (Portugal), Istituto Nazionale di Geofisica e Vulcanologia (Italy), National Observatory of Athens (Greece), Verdur (Iceland Meterorological Office), and EUREF Permanent Network Central Bureau (Belgium), each host data from GNSS station networks. These EPOS members have expressed their intention to implement GSAC at their respective data centers, and several have initiated implementation. In the US, GSAC has been successfully used at three data centers, each maintaining their own local information architecture to manage their respective data and metadata holdings, and this capability of GSAC will also be utilized in the EPOS context. Lessons have been learned through the GSAC installations so far that show the way for augmenting data center information architecture to both maximize the capabilities of GSAC to allow unified data and metadata presentation for search and access.

People’s Republic of China Scientific Abstracts, Number 170

DTIC Science & Technology

1977-06-30

Distribution Unlimited 20000324 188 U. S. JOINT PUBLICATIONS RESEARCH SERVICE REPRODUCED BY NATIONAL TECHNICAL INFORMATION SERVICE Reproduced From Best...Road, Wooster, Ohio, 44691. Correspondence pertaining to matters other than procurement may be addressed to Joint Publications Research Service...Performing Organization Name and Addreaa Joint Publications Research Service 1000 North Glebe Road Arlington, Virginia 22201 10. Project/Task/Work

A Euclid, LSST and WFIRST Joint Processing Study

NASA Astrophysics Data System (ADS)

Chary, Ranga-Ram; Joint Processing Working Group

2018-01-01

Euclid, LSST and WFIRST are the flagship cosmological projects of the next decade. By mapping several thousand square degrees of sky and covering the electromagnetic spectrum from the optical to the NIR with (sub-)arcsec resolution, these projects will provide exciting new constraints on the nature of dark energy and dark matter. The ultimate cosmological, astrophysical and time-domain science yield from these missions, which will detect several billions of sources, requires joint processing at the pixel-level. Three U.S. agencies (DOE, NASA and NSF) are supporting an 18-month study which aims to 1) assess the optimal techniques to combine these, and ancillary data sets at the pixel level; 2) investigate options for an interface that will enable community access to the joint data products; and 3) identify the computing and networking infrastructure to properly handle and manipulate these large datasets together. A Joint Processing Working Group (JPWG) is carrying out this study and consists of US-based members from the community and science/data processing centers of each of these projects. Coordination with European partners is envisioned in the future and European Euclid members are involved in the JPWG as observers. The JPWG will scope the effort and resources required to build up the capabilities to support scientific investigations using joint processing in time for the start of science surveys by LSST and Euclid.

The effect of subject measurement error on joint kinematics in the conventional gait model: Insights from the open-source pyCGM tool using high performance computing methods.

PubMed

Schwartz, Mathew; Dixon, Philippe C

2018-01-01

The conventional gait model (CGM) is a widely used biomechanical model which has been validated over many years. The CGM relies on retro-reflective markers placed along anatomical landmarks, a static calibration pose, and subject measurements as inputs for joint angle calculations. While past literature has shown the possible errors caused by improper marker placement, studies on the effects of inaccurate subject measurements are lacking. Moreover, as many laboratories rely on the commercial version of the CGM, released as the Plug-in Gait (Vicon Motion Systems Ltd, Oxford, UK), integrating improvements into the CGM code is not easily accomplished. This paper introduces a Python implementation for the CGM, referred to as pyCGM, which is an open-source, easily modifiable, cross platform, and high performance computational implementation. The aims of pyCGM are to (1) reproduce joint kinematic outputs from the Vicon CGM and (2) be implemented in a parallel approach to allow integration on a high performance computer. The aims of this paper are to (1) demonstrate that pyCGM can systematically and efficiently examine the effect of subject measurements on joint angles and (2) be updated to include new calculation methods suggested in the literature. The results show that the calculated joint angles from pyCGM agree with Vicon CGM outputs, with a maximum lower body joint angle difference of less than 10-5 degrees. Through the hierarchical system, the ankle joint is the most vulnerable to subject measurement error. Leg length has the greatest effect on all joints as a percentage of measurement error. When compared to the errors previously found through inter-laboratory measurements, the impact of subject measurements is minimal, and researchers should rather focus on marker placement. Finally, we showed that code modifications can be performed to include improved hip, knee, and ankle joint centre estimations suggested in the existing literature. The pyCGM code is provided in open source format and available at https://github.com/cadop/pyCGM.

The effect of subject measurement error on joint kinematics in the conventional gait model: Insights from the open-source pyCGM tool using high performance computing methods

PubMed Central

Dixon, Philippe C.

2018-01-01

The conventional gait model (CGM) is a widely used biomechanical model which has been validated over many years. The CGM relies on retro-reflective markers placed along anatomical landmarks, a static calibration pose, and subject measurements as inputs for joint angle calculations. While past literature has shown the possible errors caused by improper marker placement, studies on the effects of inaccurate subject measurements are lacking. Moreover, as many laboratories rely on the commercial version of the CGM, released as the Plug-in Gait (Vicon Motion Systems Ltd, Oxford, UK), integrating improvements into the CGM code is not easily accomplished. This paper introduces a Python implementation for the CGM, referred to as pyCGM, which is an open-source, easily modifiable, cross platform, and high performance computational implementation. The aims of pyCGM are to (1) reproduce joint kinematic outputs from the Vicon CGM and (2) be implemented in a parallel approach to allow integration on a high performance computer. The aims of this paper are to (1) demonstrate that pyCGM can systematically and efficiently examine the effect of subject measurements on joint angles and (2) be updated to include new calculation methods suggested in the literature. The results show that the calculated joint angles from pyCGM agree with Vicon CGM outputs, with a maximum lower body joint angle difference of less than 10-5 degrees. Through the hierarchical system, the ankle joint is the most vulnerable to subject measurement error. Leg length has the greatest effect on all joints as a percentage of measurement error. When compared to the errors previously found through inter-laboratory measurements, the impact of subject measurements is minimal, and researchers should rather focus on marker placement. Finally, we showed that code modifications can be performed to include improved hip, knee, and ankle joint centre estimations suggested in the existing literature. The pyCGM code is provided in open source format and available at https://github.com/cadop/pyCGM. PMID:29293565

Implementing Network-Centric Operations in Joint Task Forces: Changes in Joint Doctrine

DTIC Science & Technology

2006-06-16

the hierarchy, explaining the relationship between vertically connected components (Gibson, Ivancevich , and Donnelly 1973, 289). The flow of...John M. Ivancevich , and James H. Donnelly. 1973. Organizations: Structure, Processes, Behavior. Dallas, TX: Business Publication, Inc. Gonzales

WisDOT asphaltic mixture new specifications implementation : field compaction and density.

DOT National Transportation Integrated Search

2016-06-01

The main research objectives of this study were to evaluate HMA Longitudinal Joint type, method and compaction data to produce specification recommendations that will ensure the highest density longitudinal joint, as well as evaluate and produce a sp...

Software Correlator for Radioastron Mission

NASA Astrophysics Data System (ADS)

Likhachev, Sergey F.; Kostenko, Vladimir I.; Girin, Igor A.; Andrianov, Andrey S.; Rudnitskiy, Alexey G.; Zharov, Vladimir E.

In this paper, we discuss the characteristics and operation of Astro Space Center (ASC) software FX correlator that is an important component of space-ground interferometer for Radioastron project. This project performs joint observations of compact radio sources using 10m space radio telescope (SRT) together with ground radio telescopes at 92, 18, 6 and 1.3 cm wavelengths. In this paper, we describe the main features of space-ground VLBI data processing of Radioastron project using ASC correlator. Quality of implemented fringe search procedure provides positive results without significant losses in correlated amplitude. ASC Correlator has a computational power close to real time operation. The correlator has a number of processing modes: “Continuum”, “Spectral Line”, “Pulsars”, “Giant Pulses”,“Coherent”. Special attention is paid to peculiarities of Radioastron space-ground VLBI data processing. The algorithms of time delay and delay rate calculation are also discussed, which is a matter of principle for data correlation of space-ground interferometers. During five years of Radioastron SRT successful operation, ASC correlator showed high potential of satisfying steady growing needs of current and future ground and space VLBI science. Results of ASC software correlator operation are demonstrated.

Aviation & Space Weather Policy Research: Integrating Space Weather Observations & Forecasts into Operations

NASA Astrophysics Data System (ADS)

Fisher, G.; Jones, B.

2006-12-01

The American Meteorological Society and SolarMetrics Limited are conducting a policy research project leading to recommendations that will increase the safety, reliability, and efficiency of the nation's airline operations through more effective use of space weather forecasts and information. This study, which is funded by a 3-year National Science Foundation grant, also has the support of the Federal Aviation Administration and the Joint Planning and Development Office (JPDO) who is planning the Next Generation Air Transportation System. A major component involves interviewing and bringing together key people in the aviation industry who deal with space weather information. This research also examines public and industrial strategies and plans to respond to space weather information. The focus is to examine policy issues in implementing effective application of space weather services to the management of the nation's aviation system. The results from this project will provide government and industry leaders with additional tools and information to make effective decisions with respect to investments in space weather research and services. While space weather can impact the entire aviation industry, and this project will address national and international issues, the primary focus will be on developing a U.S. perspective for the airlines.

Reengineering the picture archiving and communication system (PACS) process for digital imaging networks PACS.

PubMed

Horton, M C; Lewis, T E; Kinsey, T V

1999-05-01

Prior to June 1997, military picture archiving and communications systems (PACS) were planned, procured, and installed with key decisions on the system, equipment, and even funding sources made through a research and development office called Medical Diagnostic Imaging Systems (MDIS). Beginning in June 1997, the Joint Imaging Technology Project Office (JITPO) initiated a collaborative and consultative process for planning and implementing PACS into military treatment facilities through a new Department of Defense (DoD) contract vehicle called digital imaging networks (DIN)-PACS. The JITPO reengineered this process incorporating multiple organizations and politics. The reengineered PACS process administered through the JITPO transformed the decision process and accountability from a single office to a consultative method that increased end-user knowledge, responsibility, and ownership in PACS. The JITPO continues to provide information and services that assist multiple groups and users in rendering PACS planning and implementation decisions. Local site project managers are involved from the outset and this end-user collaboration has made the sometimes difficult transition to PACS an easier and more acceptable process for all involved. Corporately, this process saved DoD sites millions by having PACS plans developed within the government and proposed to vendors second, and then having vendors respond specifically to those plans. The integrity and efficiency of the process have reduced the opportunity for implementing nonstandard systems while sharing resources and reducing wasted government dollars. This presentation will describe the chronology of changes, encountered obstacles, and lessons learned within the reengineering of the PACS process for DIN-PACS.

THE VLA-COSMOS SURVEY. IV. DEEP DATA AND JOINT CATALOG

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schinnerer, E.; Sargent, M. T.; Bondi, M.

2010-06-15

In the context of the VLA-COSMOS Deep project, additional VLA A array observations at 1.4 GHz were obtained for the central degree of the COSMOS field and combined with the existing data from the VLA-COSMOS Large project. A newly constructed Deep mosaic with a resolution of 2.''5 was used to search for sources down to 4{sigma} with 1{sigma} {approx} 12 {mu}Jy beam{sup -1} in the central 50' x 50'. This new catalog is combined with the catalog from the Large project (obtained at 1.''5 x 1.''4 resolution) to construct a new Joint catalog. All sources listed in the new Jointmore » catalog have peak flux densities of {>=}5{sigma} at 1.''5 and/or 2.''5 resolution to account for the fact that a significant fraction of sources at these low flux levels are expected to be slightly resolved at 1.''5 resolution. All properties listed in the Joint catalog, such as peak flux density, integrated flux density, and source size, are determined in the 2.''5 resolution Deep image. In addition, the Joint catalog contains 43 newly identified multi-component sources.« less

Enhancement of environment and resources engineering studies through an international cooperation network

NASA Astrophysics Data System (ADS)

Caporali, E.; Tuneski, A.

2012-12-01

Higher education plays a very important role in the modern societies development, enhancing social, cultural and economic development for a sustainable growth, environment respectful. In this framework, the European Commission promotes the TEMPUS-Trans European Mobility Programme for University Studies. Curricula harmonization and lifelong learning programme development in higher education are among the focused aspects of the TEMPUS programme. The DEREL-Development of Environment and Resources Engineering Learning, is a three years TEMPUS project coordinated by the University of Firenze, in cooperation with colleagues of the Ss Cyril and Methodius University, Skopje financed and activated since October 2010. The DEREL Project Consortium consists of 4 EU Universities (from Italy, Greece, Germany and Austria), 7 Partner Countries (PC) Universities (from FYR of Macedonia, Serbia and Albania), and 1 PC Ministry, 4 PC National Agencies, 1 PC non governmental organization and 1 PC enterprise. In cooperation with the same 4 EU Universities and the same Macedonian Institutions, in the period 2005-2008 also a TEMPUS JEP entitled DEREC-Development of Environmental and Resources Engineering Curriculum, was also carried out by the University of Firenze in cooperation with colleagues of the Ss Cyril and Methodius University. Within DEREC a new three-years first cycle curriculum in Environmental and Resources Engineering was opened at the University Ss Cyril and Methodius, Skopje, and the necessary conditions for offering a Joint Degree Title, on the basis of an agreement between the Ss. Cyril and Methodius University and the University of Firenze, were fulfilled. The running DEREL project, as a continuation of DEREC, is aimed to introduce a new, up-to-date, postgraduate second cycle curriculum in Environment and Resources Engineering at the Ss Cyril and Methodius University in Skopje, FYR of Macedonia, University of Novi Sad, Serbia and Polytechnic University of Tirana, Albania, following the criteria and conditions for setting up a Joint Postgraduate Degree. The new second cycle degree courses are going to be activated in the academic year 2012/2012. Both the first and second cycle curricula, developed through the co-operation, exchange of know-how and expertise between partners, are based on the European Credit Transfer System and are in accordance with the Bologna Process. In DEREL a second objective is to implement a sustainable regional network aimed to offer lifelong learning seminars for environment and resources engineering education and training of interested stakeholders and organize workshops focused on strengthening the links in the knowledge triangle: environment education-innovation-research, with participation of postgraduate students, public services, enterprises and NGO's. Also, the good collaborative environment created, since 2005, with the project partners can be surely mentioned as an additional valuable objective of the two TEMPUS projects, enabling implementation of a sustainable international network for environment and resources engineering studies enhancement and development.

NATO initial common operational picture capability project

NASA Astrophysics Data System (ADS)

Fanti, Laura; Beach, David

2002-08-01

The Common Operational Picture (COP) capability can be defined as the ability to display on a single screen integrated views of the Recognized Maritime, Air and Ground Pictures, enriched by other tactical data, such as theater plans, assets, intelligence and logistics information. The purpose of the COP capability is to provide military forces a comprehensive view of the battle space, thereby enhancing situational awareness and the decision-making process across the military command and control spectrum. The availability of a COP capability throughout the command structure is a high priority operational requirement in NATO. A COP capability for NATO is being procured and implemented in an incremental way within the NATO Automated Information System (Bi-SC AIS) Functional Services programme under the coordination of the NATO Consultation, Command and Control Agency (NC3A) Integrated Programme Team 5 (IPT5). The NATO Initial COP (iCOP) capability project, first step of this evolutionary procurement, will provide an initial COP capability to NATO in a highly pragmatic and low-risk fashion, by using existing operational communications infrastructure and NATO systems, i.e. the NATO-Wide Integrated Command and Control Software for Air Operations (ICC), the Maritime Command and Control Information System (MCCIS), and the Joint Operations and Intelligence Information System (JOIIS), which will provide respectively the Recognized Air, Maritime and Ground Pictures. This paper gives an overview of the NATO Initial COP capability project, including its evolutionary implementation approach, and describes the technical solution selected to satisfy the urgent operational requirement in a timely and cost effective manner.

JC2Sat-FF : An International Collaboration Nano-Sat Project Overview of the System Analyses and Design

NASA Astrophysics Data System (ADS)

Yoshihara, K.; van Mierlo, M.; Ng, A.; Shankar Kumar, B.; De Ruiter, A.; Komatsu, Y.; Horiguchi, H.; Hashimoto, H.

2008-08-01

This paper introduces the Japan Canada Joint Collaboration Satellites - Formation Flying (JC2Sat-FF) project. JC2Sat-FF is a joint project between the Canadian Space Agency (CSA) and the Japan Aerospace Exploration Agency (JAXA) with the end goal of building, launching and operating two 20kg- class nanosatellites for technical demonstration of formation flight (FF) using differential drag technique, relative navigation using commercial off-the-shelf (COTS) dual band GPS receivers and far infra-red radiance measurement. A unique aspect of this project is that the two JC2Sats are developed by a united small team consisting of engineers and researchers from both agencies. Technical exchange in this international team gives stimulation to the members and generates a synergistic effect for the project.

Development of Early Warning System for Landslide Using Electromagnetic, Hydrological, Geotechnical, and Geological Approaches

NASA Astrophysics Data System (ADS)

Huang, Q.; Hattori, K.; Chae, B.

2011-12-01

The Joint Research Collaboration Program (JRCP) for Chinese-Korean-Japanese (CKJ) Research Collaboration is a new cooperative scheme for joint funding from Chinese Department of International Cooperation of the Ministry of Science and Technology (DOIC), Korea Foundation for International Cooperation of Science and Technology (KICOS) and Japan Science and Technology Agency (JST). In this paper, we will introduce the funded CKJ project entitled "Development of early warning system for landslide using electromagnetic, hydrological, geotechnical, and geological approaches". The final goal of the project is to develop a simple methodology for landslide monitoring/forecasting (early warning system) using self potential method in the frame work of joint research among China, Korea, and Japan. The project is developing a new scientific and technical methodology for prevention of natural soil disasters. The outline of the project is as follows: (1) basic understanding on the relationship between resistivity distribution and moisture in soil and their visualization of their dynamical changes in space and time using tomography technique, (2) laboratory experiments of rainfall induced landslides and sandbox for practical use of the basic understanding, (3) in-situ experiments for evaluation. Annual workshops/symposia, seminars will be organized for strengthening the scientific collaborations and exchanges. In consideration of the above issues, integration of geological, hydrological, geotechnical characteristics with electromagnetic one are adopted as the key approach in this project. This study is partially supported by the Joint Research Collaboration Program, DOIC, MOST, China (2010DFA21570) and the National Natural Science Foundation of China (40974038, 41025014).

Evaluation of joint sealant materials : final report.

DOT National Transportation Integrated Search

1977-05-01

In May, 1968, the Department's Research and Development Section initiated a project to evaluate joint sealants being marketed for use on roads and bridges. In the study, representatives of 31 companies installed 40 products primarily on one road and ...

7 CFR 3405.7 - Joint project proposals.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) COOPERATIVE STATE RESEARCH, EDUCATION, AND EXTENSION SERVICE, DEPARTMENT OF AGRICULTURE HIGHER EDUCATION CHALLENGE GRANTS PROGRAM Program... strengthening higher education in the food and agricultural sciences. The goals of such joint initiatives should...

NASA-DoD Lead-Free Electronics Project: Vibration Test

NASA Technical Reports Server (NTRS)

Woodrow, Thomas A.

2010-01-01

Vibration testing was conducted by Boeing Research and Technology (Seattle) for the NASA-DoD Lead-Free Electronics Solder Project. This project is a follow-on to the Joint Council on Aging Aircraft/Joint Group on Pollution Prevention (JCAA/JG-PP) Lead-Free Solder Project which was the first group to test the reliability of lead-free solder joints against the requirements of the aerospace/miLItary community. Twenty seven test vehicles were subjected to the vibration test conditions (in two batches). The random vibration Power Spectral Density (PSD) input was increased during the test every 60 minutes in an effort to fail as many components as possible within the time allotted for the test. The solder joints on the components were electrically monitored using event detectors and any solder joint failures were recorded on a Labview-based data collection system. The number of test minutes required to fail a given component attached with SnPb solder was then compared to the number of test minutes required to fail the same component attached with lead-free solder. A complete modal analysis was conducted on one test vehicle using a laser vibrometer system which measured velocities, accelerations, and displacements at one . hundred points. The laser vibrometer data was used to determine the frequencies of the major modes of the test vehicle and the shapes of the modes. In addition, laser vibrometer data collected during the vibration test was used to calculate the strains generated by the first mode (using custom software). After completion of the testing, all of the test vehicles were visually inspected and cross sections were made. Broken component leads and other unwanted failure modes were documented.

Space Traveler Project.

ERIC Educational Resources Information Center

Instructor, 1981

1981-01-01

Describes the winners of the Space Traveler Project, a contest jointly sponsored by Rockwell International, NASA, and this magazine to identify worthwhile elementary science programs relating to the Space Shuttle. (SJL)

75 FR 6250 - ITS Joint Program Office; Intelligent Transportation Systems Program Advisory Committee; Notice...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-08

... DEPARTMENT OF TRANSPORTATION ITS Joint Program Office; Intelligent Transportation Systems Program... the Intelligent Transportation Systems (ITS) Program Advisory Committee (ITSPAC). The Web conference... Transportation on all matters relating to the study, development, and implementation of intelligent...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kitanidis, Peter

As large-scale, commercial storage projects become operational, the problem of utilizing information from diverse sources becomes more critically important. In this project, we developed, tested, and applied an advanced joint data inversion system for CO 2 storage modeling with large data sets for use in site characterization and real-time monitoring. Emphasis was on the development of advanced and efficient computational algorithms for joint inversion of hydro-geophysical data, coupled with state-of-the-art forward process simulations. The developed system consists of (1) inversion tools using characterization data, such as 3D seismic survey (amplitude images), borehole log and core data, as well as hydraulic,more » tracer and thermal tests before CO 2 injection, (2) joint inversion tools for updating the geologic model with the distribution of rock properties, thus reducing uncertainty, using hydro-geophysical monitoring data, and (3) highly efficient algorithms for directly solving the dense or sparse linear algebra systems derived from the joint inversion. The system combines methods from stochastic analysis, fast linear algebra, and high performance computing. The developed joint inversion tools have been tested through synthetic CO 2 storage examples.« less

History of the Joint Chiefs of Staff. Volume 5. The Joint Chiefs of Staff and National Policy, 1953-1954

DTIC Science & Technology

1986-01-01

Kirkpatrick, USN, CJCS Staff Group, "NATO Force Goals Attained 1951 through 1954 and Projections through 1957," 4 Mar 55, OQCS File 092.2 NATO 1955 319...CINCAL CINCARIB CINCCENTER CINCFE CINCLANT CINCNE CINCNELM CINCONAD CINCPAC CINCSOUTH CINCUNC CINCUSAFE CINCUSAREUR CJCS COMLANDCENT...Snyder, "New Look," pp. 407-409. Charles J.V. Murphy, "The Eisenhower Shift," Fortune (Mar 56), p. 232. 49. Memo, Pres to CJCS , "Project Solarium," 20

Introduction to the JAWS Program

NASA Technical Reports Server (NTRS)

Mccarthy, John

1987-01-01

The JAWS Project is the Joint Airport Weather Studies project conceived in 1980 jointly between the National Center for Atmospheric Research and the Univ. of Chicago. The objectives of the program are threefold: (1) Basic scientific characterization of the microbursts and the statistics of microbursts occurrence; (2) Detection and warning, using the Low Level Wind Shear Alert System (LLWSAS) operation and performance; and (3) Doppler radar and airborne systems. These goals and the operation of the JAWS system in general are discussed in detail.

Marine Corps Research and Development Objectives Document (RADOD)

DTIC Science & Technology

1980-08-08

461.1 Data exchange /joint projects, evaluation of foreign weapon systems .......................... N/A MANAGEMENT SUPPORT 471.0 General management...DI3ZITiL WIDEBAND TtAMS𔃾ISSION ;YSTem W2AK D~ CQ)43L CCC 9S22 AUTOMATED DATA ENTlY SYSTEM (A𔃾ES) usM: CCC 9269 ORMBDAND 3MNDIRE:TID04AL VHF 4NTEM44...Standardization and Interoper- ability through data exchanges , joint projects, evaluation of foreign weapon systems , material or related technology. 461.0

The Challenge of Assessing Project-Based Learning

ERIC Educational Resources Information Center

Boss, Suzie

2012-01-01

For their ambitious project, called America at War, high school juniors at Da Vinci Charter Academy in the Davis (California) Joint Unified School District didn't just study history. They became historians. Their project offers compelling evidence of what students can accomplish through project-based learning (PBL), an instructional approach that…

Effects of people-centred factors on enterprise resource planning implementation project success: empirical evidence from Sri Lanka

NASA Astrophysics Data System (ADS)

Wickramasinghe, Vathsala; Gunawardena, Vathsala

2010-08-01

Extant literature suggests people-centred factors as one of the major areas influencing enterprise resource planning (ERP) implementation project success. Yet, to date, few empirical studies attempted to validate the link between people-centred factors and ERP implementation project success. The purpose of this study is to empirically identify people-centred factors that are critical to ERP implementation projects in Sri Lanka. The study develops and empirically validates a framework for people-centred factors that influence the success of ERP implementation projects. Survey research methodology was used and collected data from 74 ERP implementation projects in Sri Lanka. The people-centred factors of 'project team competence', 'rewards' and 'communication and change' were found to predict significantly the ERP implementation project success.

Joint Strike Figher Acquisition: Mature Critical Technologies Needed to Reduce Risks

DTIC Science & Technology

2001-10-01

Reduce Risks GAO-02-39 Report Documentation Page Report Date 00OCT2001 Report Type N/A Dates Covered (from... to) - Title and Subtitle JOINT STRIKE...FIGHTER ACQUISITION: Mature Critical Technologies Needed to Reduce Risks Contract Number Grant Number Program Element Number Author(s) Project...1Joint Strike Fighter Acquisition: Development Schedule Should Be Changed to Reduce Risks (GAO/T-NSIAD-00-132

Assessment of Biomarkers Associated with Joint Injury and Subsequent Post-Traumatic Arthritis

DTIC Science & Technology

2015-10-01

osteoarthritis, articular fracture, joint injury, trauma, biomarker, inflammation, MRI , knee, mouse model, translational research. 3. OVERALL PROJECT...intervention. MRI imaging of the injured knee will be obtained to assess the articular cartilage. Degenerative changes in the cartilage and joint space...successfully enrolled patients, collected and stored biosamples, obtained all post-operative MRI scans and are continuing to obtain 18- month MRI scans for

JOMAR: Joint Operations with Mobile Autonomous Robots

DTIC Science & Technology

2015-12-21

AFRL-AFOSR-JP-TR-2015-0009 JOMAR: Joint Operations with Mobile Autonomous Robots Edwin Olson UNIVERSITY OF MICHIGAN Final Report 12/21/2015...SUBTITLE JOMAR: Joint Operations with Mobile Autonomous Robots 5a. CONTRACT NUMBER FA23861114024 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6...14. ABSTRACT Under this grant, we formulated and implemented a variety of novel algorithms that address core problems in multi- robot systems. These

From Asteroids to Space Debris

NASA Astrophysics Data System (ADS)

Benkhaldoun, Zouhair; Moon, Hong-Kyu; Daassou, Ahmed; Jang-Hyun, Park; Lazrek, Mohamed

2015-08-01

Since 2011, the Oukaimeden Observatory (OUCA) located on the mountains of the Moroccan High Atlas has become one of the successful contributors in asteroid discovery in the world. The discovery statistics of the MOSS (Morocco Oukaimeden Sky Survey) telescope represents more than 2145 new designations to date for their credits. Its discoveries include three new NEOs and four new comets. The exceptional astro-climatic conditions in terms not only of number of clear nights, but also of atmospheric seeing are partly behind this success. Indeed the average number of observable nights is around 280 nights per year, while the average seeing is about 0.8 to 0.9 arcsec.In the meanwhile, the OUCA achieved construction and installation of a new facility in March 2015. It is a compact, 0.5 m aperture fast optics robotic telescope designed and implemented by the Optical Wide-field Patrol (OWL) team of Korea Astronomy and Space Science Institute (KASI). The primary object of the OWL project is to monitor national space-based assets, howevr either wide-field imaging- or fast data acquisition- capabilities enable to undertake observational program to catalog and follow-up various transient events in the night sky. We will brief future plan for this joint project between the OUCA and KASI.Our presentation aims to share the details of instrumentation implemented and cooperation opportunities it can arouse within the community for the data analysis and interpretation.

Change analysis in the United Arab Emirates: An investigation of techniques

USGS Publications Warehouse

Sohl, Terry L.

1999-01-01

Much of the landscape of the United Arab Emirates has been transformed over the past 15 years by massive afforestation, beautification, and agricultural programs. The "greening" of the United Arab Emirates has had environmental consequences, however, including degraded groundwater quality and possible damage to natural regional ecosystems. Personnel from the Ground- Water Research project, a joint effort between the National Drilling Company of the Abu Dhabi Emirate and the U.S. Geological Survey, were interested in studying landscape change in the Abu Dhabi Emirate using Landsat thematic mapper (TM) data. The EROs Data Center in Sioux Falls, South Dakota was asked to investigate land-cover change techniques that (1) provided locational, quantitative, and qualitative information on landcover change within the Abu Dhabi Emirate; and (2) could be easily implemented by project personnel who were relatively inexperienced in remote sensing. A number of products were created with 1987 and 1996 Landsat TM data using change-detection techniques, including univariate image differencing, an "enhanced" image differencing, vegetation index differencing, post-classification differencing, and changevector analysis. The different techniques provided products that varied in levels of adequacy according to the specific application and the ease of implementation and interpretation. Specific quantitative values of change were most accurately and easily provided by the enhanced image-differencing technique, while the change-vector analysis excelled at providing rich qualitative detail about the nature of a change. 

Parachute Questionnaire Project,

DTIC Science & Technology

1945-03-17

i Ankle ---- ---- 8 Knee ---.--.-- 9 Spine 2 Neck Muscles -5 Arch of foot ---------- 2 Leg muscles 1 Pelvis 2 0 Sacroiliac Joint ---- I Femur...11 Angle .- 2 Leg -0------ 1 Cartilage of knee ---- 1 Chest ...- . 9 Symphysis Pubis 1 Sacrum .... - 5 Sacroiliac joint -------- 1 Groin ..... . 4

Expansion joint noise reduction on the new Tacoma Narrows Bridge.

DOT National Transportation Integrated Search

2011-12-01

"Washington State Department of Transportation (WSDOT) responded to citizen complaints about expansion joint noise on the new Tacoma Narrows Bridge (TNB) by installing new wall coated in noise absorptive materials. The goal of the project was to redu...

Durability of saw-cut joints in plain cement concrete pavements.

DOT National Transportation Integrated Search

2011-01-01

The objective of this project was to evaluate factors influencing the durability of the joints in portland cement concrete : pavement in the state of Indiana. Specifically this work evaluated the absorption of water, the absorption of deicing solutio...

Effectiveness study of UNL's pneumatic crack/joint preparation device.

DOT National Transportation Integrated Search

2014-03-01

The aim of this project was to evaluate the effectiveness of the crack cleaning device (CCD) for improving the current crack/joint preparation practices and for possible adoption as a standard in Nebraska Department of Roads (NDOR). Through the colla...

Evaluation of Geosynthetics in Asphalt Overlays of Jointed Concrete Pavements

DOT National Transportation Integrated Search

2000-06-01

This report presents the findings and recommendations based on the Evaluation of Geosynthetics in Asphalt Overlays of Jointed Concrete Pavements. This project evaluated Linq Tac-711N and Strata Grid-200's ability to ease distress and reflective crack...

Experiences of Agency for Healthcare Research and Quality-funded projects that implemented practices for safer patient care.

PubMed

Taylor, Stephanie L; Ridgely, M Susan; Greenberg, Michael D; Sorbero, Melony E S; Teleki, Stephanie S; Damberg, Cheryl L; Farley, Donna O

2009-04-01

To synthesize lessons learned from the experiences of Agency for Healthcare Research and Quality-funded patient safety projects in implementing safe practices. Self-reported data from individual and group interviews with Original, Challenge, and Partnerships in Implementing Patient Safety (PIPS) grantees, from 2003 to 2006. Interviews with three grantee groups (n=60 total) implementing safe practice projects, with comparisons on factors influencing project implementation and sustainability. Semi-structured protocols contained open-ended questions on lessons learned and more structured questions on factors associated with project implementation and sustainability. The grantees shared common experiences, frequently identifying lessons learned regarding structural components needing to be in place before implementation, components of the implementation process, components of interventions' results needed for sustainability, changes in timelines or activities, unanticipated issues, and staff acceptance/adoption. Also, fewer Original grants had many of the factors related project to implementation/sustainability than the PIPS or Challenge grantees had. Although much of what was reported seemed like common sense, surprisingly few projects actually planned for or expected many of the barriers or facilitators they experienced during their project implementation. Others implementing practice improvements likely will share the experiences and issues identified by these implementation projects and can learn from their lessons.

Evaluation of a novel 7-joint ultrasound score in daily rheumatologic practice: a pilot project.

PubMed

Backhaus, M; Ohrndorf, S; Kellner, H; Strunk, J; Backhaus, T M; Hartung, W; Sattler, H; Albrecht, K; Kaufmann, J; Becker, K; Sörensen, H; Meier, L; Burmester, G R; Schmidt, W A

2009-09-15

To introduce a new standardized ultrasound score based on 7 joints of the clinically dominant hand and foot (German US7 score) implemented in daily rheumatologic practice. The ultrasound score included the following joints of the clinically dominant hand and foot: wrist, second and third metacarpophalangeal and proximal interphalangeal, and second and fifth metatarsophalangeal joints. Synovitis and synovial/tenosynovial vascularity were scored semiquantitatively (grade 0-3) by gray-scale (GS) and power Doppler (PD) ultrasound. Tenosynovitis and erosions were scored for presence. The scoring range was 0-27 for GS synovitis, 0-39 for PD synovitis, 0-7 for GS tenosynovitis, 0-21 for PD tenosynovitis, and 0-14 for erosions. Patients with arthritis were examined at baseline and after the start or change of disease-modifying antirheumatic drug (DMARD) and/or tumor necrosis factor alpha (TNFalpha) inhibitor therapy 3 and 6 months later. C-reactive protein level, erythrocyte sedimentation rate, rheumatoid factor, anti-cyclic citrullinated peptide, Disease Activity Score in 28 joints (DAS28), and radiographs of the hands and feet were performed. One hundred twenty patients (76% women) with rheumatoid arthritis (91%) and psoriatic arthritis (9%) were enrolled. In 52 cases (43%), erosions were seen in radiography at baseline. Patients received DMARDs (41%), DMARDs plus TNFalpha inhibitors (41%), or TNFalpha inhibitor monotherapy (18%). At baseline, the mean DAS28 was 5.0 and the synovitis scores were 8.1 in GS ultrasound and 3.3 in PD ultrasound. After 6 months of therapy, the DAS28 significantly decreased to 3.6 (Delta = 1.4), and the GS and PD ultrasound scores significantly decreased to 5.5 (-32%) and 2.0 (-39%), respectively. The German US7 score is a viable tool for examining patients with arthritis in daily rheumatologic practice because it significantly reflects therapeutic response.

ShakeAlert Users Transition to the Production Prototype System

NASA Astrophysics Data System (ADS)

Strauss, J. A.; Vinci, M.; Steele, W. P.; Hellweg, M.; Allen, R. M.; DeGroot, R. M.

2016-12-01

The ShakeAlert Earthquake Early Warning system transitioned from the demonstration system into the fully-fledged production prototype system this year. Users were migrated over to the new system concurrent with the release of the ShakeAlert UserDisplay Version 2.5.0. The production prototype system provides robust connectivity, fail-over mechanisms to ensure that alarms are deliverd even if one connection fails, and provides a framework to connect future stations, participants, and other sources as the project expands to the full public system. We will present an overview of key user sectors that are either testing or launching pilot projects for the system within their organizations. We will outline the implementation of certain actions, and highlight accomplishments and challenges the Beta Users encounter in fully implementing ShakeAlert within their organizations. By better studying these issues, project partners can better assist the users in incorporating early warning in their operations. Opening up the system to allow for pilot projects enables ShakeAlert users to develop hardware, software, and policy solutions for actions in response to early warning alerts in a controlled environment. This is the first step on the path toward limited rollouts. The pilot groups leverage the expertise of our stakeholders to develop the `last mile' alert distribution and responses. The transition went smoothly in February 2015, for users in California, and we expect to connect with more beta users and pilot groups in this next phase. User transition is planned for Fall 2016 for users in the Pacific Northwest. Beta Users, such as municipalities, emergency response groups, and county officials, lifelines, schools, and private industry continue to meet with ShakeAlert partners to 1) further education and training on both benefits and limitations 2) strategize on implementation actions, such as opening fire house bay doors in response to an alarm, and 3) coordinate continued engagement as the system comes online with more Users and in more areas. The newly created Joint Committee on Communication, Education, and Outreach is aiding with the education and training aspect of the rollout.

42 CFR 137.340 - May a Self-Governance Tribe contribute funding to a project?

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 1 2012-10-01 2012-10-01 false May a Self-Governance Tribe contribute funding to a... Project Assumption Process § 137.340 May a Self-Governance Tribe contribute funding to a project? Yes, the Self-Governance Tribe and the Secretary may jointly fund projects. The construction project agreement...

42 CFR 137.340 - May a Self-Governance Tribe contribute funding to a project?

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 1 2014-10-01 2014-10-01 false May a Self-Governance Tribe contribute funding to a... Project Assumption Process § 137.340 May a Self-Governance Tribe contribute funding to a project? Yes, the Self-Governance Tribe and the Secretary may jointly fund projects. The construction project agreement...

42 CFR 137.340 - May a Self-Governance Tribe contribute funding to a project?

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false May a Self-Governance Tribe contribute funding to a... Project Assumption Process § 137.340 May a Self-Governance Tribe contribute funding to a project? Yes, the Self-Governance Tribe and the Secretary may jointly fund projects. The construction project agreement...

42 CFR 137.340 - May a Self-Governance Tribe contribute funding to a project?

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false May a Self-Governance Tribe contribute funding to a... Project Assumption Process § 137.340 May a Self-Governance Tribe contribute funding to a project? Yes, the Self-Governance Tribe and the Secretary may jointly fund projects. The construction project agreement...

Measurement of joint kinematics using a conventional clinical single-perspective flat-panel radiography system.

PubMed

Seslija, Petar; Teeter, Matthew G; Yuan, Xunhua; Naudie, Douglas D R; Bourne, Robert B; Macdonald, Steven J; Peters, Terry M; Holdsworth, David W

2012-10-01

The ability to accurately measure joint kinematics is an important tool in studying both normal joint function and pathologies associated with injury and disease. The purpose of this study is to evaluate the efficacy, accuracy, precision, and clinical safety of measuring 3D joint motion using a conventional flat-panel radiography system prior to its application in an in vivo study. An automated, image-based tracking algorithm was implemented to measure the three-dimensional pose of a sparse object from a two-dimensional radiographic projection. The algorithm was tested to determine its efficiency and failure rate, defined as the number of image frames where automated tracking failed, or required user intervention. The accuracy and precision of measuring three-dimensional motion were assessed using a robotic controlled, tibiofemoral knee phantom programmed to mimic a subject with a total knee replacement performing a stair ascent activity. Accuracy was assessed by comparing the measurements of the single-plane radiographic tracking technique to those of an optical tracking system, and quantified by the measurement discrepancy between the two systems using the Bland-Altman technique. Precision was assessed through a series of repeated measurements of the tibiofemoral kinematics, and was quantified using the across-trial deviations of the repeated kinematic measurements. The safety of the imaging procedure was assessed by measuring the effective dose of ionizing radiation associated with the x-ray exposures, and analyzing its relative risk to a human subject. The automated tracking algorithm displayed a failure rate of 2% and achieved an average computational throughput of 8 image frames/s. Mean differences between the radiographic and optical measurements for translations and rotations were less than 0.08 mm and 0.07° in-plane, and 0.24 mm and 0.6° out-of-plane. The repeatability of kinematics measurements performed using the radiographic tracking technique was better than ±0.09 mm and 0.12° in-plane, and ±0.70 mm and ±0.07° out-of-plane. The effective dose associated with the imaging protocol used was 15 μSv for 10 s of radiographic cine acquisition. This study demonstrates the ability to accurately measure knee-joint kinematics using a single-plane radiographic measurement technique. The measurement technique can be easily implemented at most clinical centers equipped with a modern-day radiographic x-ray system. The dose of ionizing radiation associated with the image acquisition represents a minimal risk to any subjects undergoing the examination.

A Multiple Degree of Freedom Lower Extremity Isometric Device to Simultaneously Quantify Hip, Knee and Ankle Torques

PubMed Central

Sánchez, Natalia; Acosta, Ana Maria; Stienen, Arno H.A.

2015-01-01

Characterization of the joint torque coupling strategies used in the lower extremity to generate maximal and submaximal levels of torque at either the hip, knee or ankle is lacking. Currently, there are no available isometric devices that quantify all concurrent joint torques in the hip, knee and ankle of a single leg during maximum voluntary torque generation. Thus, joint-torque coupling strategies in the hip, knee and concurrent torques at ankle and/or coupling patterns at the hip and knee driven by the ankle have yet to be quantified. This manuscript describes the design, implementation and validation of a multiple degree of freedom, lower extremity isometric device (the MultiLEIT) that accurately quantifies simultaneous torques at the hip, knee and ankle. The system was mechanically validated and then implemented with two healthy control individuals and two post-stroke individuals to test usability and patient acceptance. Data indicated different joint torque coupling strategies used by both healthy individuals. In contrast, data showed the same torque coupling patterns in both post-stroke individuals, comparable to those described in the clinic. Successful implementation of the MultiLEIT can contribute to the understanding of the underlying mechanisms responsible for abnormal movement patterns and aid in the design of therapeutic interventions. PMID:25163064

Dose reconstruction for the Urals population. Joint Coordinating Committee on Radiation Effects Research, Project 1.1 -- Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Degteva, M.O.; Drozhko, E.; Anspaugh, L.R.

1996-02-01

This work is being carried out as a feasibility study to determine if a long-term course of work can be implemented to assess the long-term risks of radiation exposure delivered at low to moderate dose rates to the populations living in the vicinity of the Mayak Industrial Association (MIA). This work was authorized and conducted under the auspices of the US-Russian Joint Coordinating Committee on Radiation Effects Research (JCCRER) and its Executive Committee (EC). The MIA was the first Russian site for the production and separation of plutonium. This plant began operation in 1948, and during its early days theremore » were technological failures that resulted in the release of large amounts of waste into the rather small Techa River. There were also gaseous releases of radioiodines and other radionuclides during the early days of operation. In addition, there was an accidental explosion in a waste storage tank in 1957 that resulted in a significant release. The Techa River Cohort has been studied for several years by scientists from the Urals Research Centre for Radiation Medicine and an increase in both leukemia and solid tumors has been noted.« less

Global Precipitation Measurement (GPM) and International Space Station (ISS) Coordination for CubeSat Deployments to Minimize Collision Risk

NASA Technical Reports Server (NTRS)

Pawloski, James H.; Aviles, Jorge; Myers, Ralph; Parris, Joshua; Corley, Bryan; Hehn, Garrett; Pascucci, Joseph

2016-01-01

The Global Precipitation Measurement Mission (GPM) is a joint U.S. and Japan mission to observe global precipitation, extending the Tropical Rainfall Measuring Mission (TRMM), which was launched by H-IIA from Tanegashima in Japan on February 28TH, 2014 directly into its 407km operational orbit. The International Space Station (ISS) is an international human research facility operated jointly by Russia and the USA from NASA's Johnson Space Center (JSC) in Houston Texas. Mission priorities lowered the operating altitude of ISS from 415km to 400km in early 2105, effectively placing both vehicles into the same orbital regime. The ISS has begun a program of deployments of cost effective CubeSats from the ISS that allow testing and validation of new technologies. With a major new asset flying at the same effective altitude as the ISS, CubeSat deployments became a serious threat to GPM and therefore a significant indirect threat to the ISS. This paper describes the specific problem of collision threat to GPM and risk to ISS CubeSat deployment and the process that was implemented to keep both missions safe from collision and maximize their project goals.

A universal six-joint robot controller

NASA Technical Reports Server (NTRS)

Bihn, D. G.; Hsia, T. C.

1987-01-01

A general purpose six-axis robotic manipulator controller was designed and implemented to serve as a research tool for the investigation of the practical and theoretical aspects of various control strategies in robotics. A 80286-based Intel System 310 running the Xenix operating servo software as well as the higher level software (e.g., kinematics and path planning) were employed. A Multibus compatible interface board was designed and constructed to handle I/O signals from the robot manipulator's joint motors. From the design point of view, the universal controller is capable of driving robot manipulators equipped with D.C. joint motors and position optical encoders. To test its functionality, the controller is connected to the joint motor D.C. power amplifier of a PUMA 560 arm bypassing completely the manufacturer-supplied Unimation controller. A controller algorithm consisting of local PD control laws was written and installed into the Xenix operating system. Additional software drivers were implemented to allow application programs access to the interface board. All software was written in the C language.

Parent-adolescent joint projects involving leisure time and activities during the transition to high school.

PubMed

Marshall, Sheila K; Young, Richard A; Wozniak, Agnieszka; Lollis, Susan; Tilton-Weaver, Lauree; Nelson, Margo; Goessling, Kristen

2014-10-01

Leisure research to date has generally overlooked planning and organizing of leisure time and activities between parents and adolescents. This investigation examined how a sample of Canadian adolescents and their parents jointly constructed and acted on goals related to adolescents' leisure time during the move from elementary to high school. Using the Qualitative Action-Project Method, data were collected over an 8-10 month period from 26 parent-adolescent dyads located in two urban sites, through video-taped conversations about leisure time, video recall interviews, and telephone monitoring interviews. Analysis of the data revealed that the joint projects of the 26 dyads could be grouped into three clusters: a) governance transfer or attempts to shift, from parent to adolescent, responsibility over academic demands, organizing leisure time, and safety with peers, b) balancing extra-curricular activities with family life, academics, and social activities, and c) relationship adjustment or maintenance. Crown Copyright © 2014. Published by Elsevier Ltd. All rights reserved.

Lesson's-learned from a 2003-2006 USA-Honduras NGO and University Geosciences Education Partnership in Land use Land / Land Cover Change Analysis using Remote Sensing and GPS

NASA Astrophysics Data System (ADS)

Ford, R. E.

2006-12-01

Between 2004 and 2006 the Loma Linda University ESSE21 Mesoamerican Project (Earth System Science Education for the 21st Century) collaborated with a series of academic, NGO (nongovernmental) and government agencies, including a USAID (United States Agency for International Development) integrated environmental resource management project to: a) build the human and technical capacity of local partners in the use of geospatial technologies, e.g. GIS, GPS, Remote Sensing, b) improve their capacity to apply these tools to biodiversity, health, sustainability, protected-area management, and other NRM (Natural Resource Management) decision-making needs and problems, and c) establish long term institutional relationships for teacher/student exchange, including development of joint curricula and research projects focused on health geoinformatics as well as sustainable development. Much of this has contributed toward a new "geotourism" effort adopted by Honduras called the SAVE Honduras strategy (Scientific, Academic, Volunteer, Educational). A central element of this initiative is to increase joint collaborative research and learning together by students and faculty at US universities working with Honduran institutions (private and public). See SAVE Strategy page = http://www.fundacionsave.com/home_eng.html In the presentation we describe our experience over the last three years collaborating with key partners such as the Central American Observatory of Suyapa based at the UNAH (Universidad Nacional Autónoma de Honduras) which has opened a new GIS/Remote Sensing Laboratory. We also collaborated closely with CURLA (Centro Universitario Regional del Litoral Atlántico) located near La Ceiba--a land grant-type institution- -to support outreach and extension activities by students and staff to local-level NGOs and community groups dealing with conservation, hazards mitigation, biodiversity, fisheries and related problems. We have also participated in joint "informal education" efforts doing environmental and ecotourism outreach with groups such as the Hugh Parkey Foundation and EarthWatch Institute in Belize and others in Honduras such as FUCSA (Fundacion Cuero y Salado), FUPNAPIB (Fundacion Parque Nacional Pico Bonito), REHDES (Red Ecologista Hondurena para el Desarrollo Sostenible), and SMBC (Sociedad Mesoamericana para la Biologia y Conservacion). See more about the projects on water resources, herpetofauna on the Pacific coast, and the West Indian manatee at: http://resweb.llu.edu/rford/ Lessons learned about designing, organizing, implementing, and financing such geosciences educational partnerships will be presented as well as describing "next steps". Suggestions about how other universities could join with us will be also proposed.

A NASA/RAE cooperation in the development of a real-time knowledge-based autopilot

NASA Technical Reports Server (NTRS)

Daysh, Colin; Corbin, Malcolm; Butler, Geoff; Duke, Eugene L.; Belle, Steven D.; Brumbaugh, Randal W.

1991-01-01

As part of a US/UK cooperative aeronautical research program, a joint activity between the NASA Dryden Flight Research Facility and the Royal Aerospace Establishment on knowledge-based systems was established. This joint activity is concerned with tools and techniques for the implementation and validation of real-time knowledge-based systems. The proposed next stage of this research is described, in which some of the problems of implementing and validating a knowledge-based autopilot for a generic high-performance aircraft are investigated.

Youth, alcohol, and speeding : their joint contribution to highway accidents

DOT National Transportation Integrated Search

1976-09-01

The objective of the project was to obtain empirical data on the joint influence of slightly excessive speed and low-to-moderate blood-alcohol concentration upon accident-involvement as a function of age and driving experience, and to determine if th...

75 FR 2930 - Proposed Collection; Comment Request for Regulation Project

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-19

... DEPARTMENT OF THE TREASURY Internal Revenue Service [REG-106446-98] Proposed Collection; Comment Request for Regulation Project AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice and... From Joint and Several Liability. OMB Number: 1545-1719. Regulation Project Number: REG-106446-98...

In-hospital rehabilitation after multiple joint procedures of the lower extremities in haemophilia patients: clinical guidelines for physical therapists.

PubMed

De Kleijn, P; Fischer, K; Vogely, H Ch; Hendriks, C; Lindeman, E

2011-11-01

This project aimed to develop guidelines for use during in-hospital rehabilitation after combinations of multiple joint procedures (MJP) of the lower extremities in persons with haemophilia (PWH). MJP are defined as surgical procedures on the ankles, knees and hips, performed in any combination, staged, or during a single session. MJP that we studied included total knee arthroplasty, total hip arthroplasty and ankle arthrodesis. Literature on rheumatoid arthritis demonstrated promising functional results, fewer hospitalization days and days lost from work. However, the complication rate is higher and rehabilitation needs optimal conditions. Since 1995, at the Van Creveldkliniek, 54 PWH have undergone MJP. During the rehabilitation in our hospital performed by experienced physical therapists, regular guidelines seemed useless. Guidelines will guarantee an optimal physical recovery and maximum benefit from this enormous investment. This will lead to an optimal functional capability and optimal quality of life for this elderly group of PWH. There are no existing guidelines for MJP, in haemophilia, revealed through a review of the literature. Therefore, a working group was formed to develop and implement such guidelines and the procedure is explained. The total group of PWH who underwent MJP is described, subdivided into combinations of joints. For these subgroups, the number of days in hospital, complications and profile at discharge, as well as a guideline on the clinical rehabilitation, are given. It contains a general part and a part for each specific subgroup. © 2011 Blackwell Publishing Ltd.

Gulf Coast Joint Venture - Home

Science.gov Websites

Research Resources Data Documents Links Mottled Duck Info Habitat Projects Habitat Funding Contact Us Home - About Us - Planning and Evaluation - Resources - Habitat Projects - Habitat Funding - Contact Us Gulf

7 CFR 3406.8 - Joint project proposals.

Code of Federal Regulations, 2014 CFR

2014-01-01

... regional or national problems and which will result overall in strengthening the 1890 university system...-effectiveness through achieving economies of scale, strengthening the scope and quality of a project's impact...

7 CFR 3406.8 - Joint project proposals.

Code of Federal Regulations, 2012 CFR

2012-01-01

... regional or national problems and which will result overall in strengthening the 1890 university system...-effectiveness through achieving economies of scale, strengthening the scope and quality of a project's impact...

7 CFR 3406.8 - Joint project proposals.

Code of Federal Regulations, 2011 CFR

2011-01-01

... regional or national problems and which will result overall in strengthening the 1890 university system...-effectiveness through achieving economies of scale, strengthening the scope and quality of a project's impact...

7 CFR 3406.8 - Joint project proposals.

Code of Federal Regulations, 2013 CFR

2013-01-01

... regional or national problems and which will result overall in strengthening the 1890 university system...-effectiveness through achieving economies of scale, strengthening the scope and quality of a project's impact...

A Spatial Analysis and Modeling System (SAMS) for environment management

NASA Technical Reports Server (NTRS)

Stetina, Fran; Hill, John; Chan, Paul; Jaske, Robert; Rochon, Gilbert

1993-01-01

This is a proposal to develop a uniform global environmental data gathering and distribution system to support the calibration and validation of remotely sensed data. SAMS is based on an enhanced version of FEMA's Integrated Emergency Management Information Systems and the Department of Defense's Air land Battlefield Environment Software Systems. This system consists of state-of-the-art graphics and visualization techniques, simulation models, database management and expert systems for conducting environmental and disaster preparedness studies. This software package will be integrated into various Landsat and UNEP-GRID stations which are planned to become direct readout stations during the EOS (Earth Observing System) timeframe. This system would be implemented as a pilot program to support the Tropical Rainfall Measuring Mission (TRMM). This will be a joint NASA-FEMA-University-Industry project.

A Spatial Analysis and Modeling System (SAMS) for environment management

NASA Technical Reports Server (NTRS)

Vermillion, Charles H.; Stetina, Fran; Hill, John; Chan, Paul; Jaske, Robert; Rochon, Gilbert

1992-01-01

This is a proposal to develop a uniform global environmental data gathering and distribution system to support the calibration and validation of remotely sensed data. SAMS is based on an enhanced version of FE MA's Integrated Emergency Management Information Systems and the Department of Defense's Air Land Battlefield Environment Software Systems. This system consists of state-of-the-art graphics and visualization techniques, simulation models, database management and expert systems for conducting environmental and disaster preparedness studies. This software package will be integrated into various Landsat and UNEP-GRID stations which are planned to become direct readout stations during the EOS timeframe. This system would be implemented as a pilot program to support the Tropical Rainfall Measuring Mission (TRMM). This will be a joint NASA-FEMA-University-Industry project.

Interdisciplinary collaboration and the electronic medical record.

PubMed

Green, Shayla D; Thomas, Joan D

2008-01-01

To examine interdisciplinary collaboration via electronic medical records (EMRs) with a focus on physicians' perception of nursing documentation. Quality improvement project using a survey instrument. Tertiary care pediatric hospital. Thirty-seven physicians. Physicians perceptions of nursing documentation after EMR implementation Physicians desire nursing documentation with greater clarity and additional information. Physicians indicate checklists alone for patient assessment and intervention data are insufficient for effective nurse/physician collaboration. Narrative nursing summaries are invaluable references that guide medical treatment decisions. Physicians see detailed assessments and well-described interventions of nurses' as critical to their ability to effectively practice medicine. Health care technology is called to develop EMRs that enable nurses to document detailed patient data in a swift and straightforward manner. Joint collaboration between nurses, physicians, and technology specialists is recommended to develop effective EMR systems.

Ergonomic evaluation of the environment: a case study in a control room of the hydroelectric sector.

PubMed

Falcão, Christianne Soares; Soares, Marcelo Marcio

2012-01-01

Representative systematic evaluation studies of the workspace and the extent to which that space is suitable for performing tasks have been developed by professionals engaged on finding evidence as to the importance of users and designers being joint participants in drawing up projects. In this context, this paper sets out to evaluate the environment of a control room in the hydroelectric sector, based on a multidisciplinary method which integrates ergonomics, architecture and environmental psychology so as to assess the influence of space on the user, and thus to identify the user's level of satisfaction with it. It was observed that some adaptation strategies of the space for activities were not implemented satisfactorily, resulting in the need for further studies on making workspaces suitable.

Cross-sectoral optimization and visualization of transformation processes in urban water infrastructures in rural areas.

PubMed

Baron, S; Kaufmann Alves, I; Schmitt, T G; Schöffel, S; Schwank, J

2015-01-01

Predicted demographic, climatic and socio-economic changes will require adaptations of existing water supply and wastewater disposal systems. Especially in rural areas, these new challenges will affect the functionality of the present systems. This paper presents a joint interdisciplinary research project with the objective of developing an innovative software-based optimization and decision support system for the implementation of long-term transformations of existing infrastructures of water supply, wastewater and energy. The concept of the decision support and optimization tool is described and visualization methods for the presentation of results are illustrated. The model is tested in a rural case study region in the Southwest of Germany. A transformation strategy for a decentralized wastewater treatment concept and its visualization are presented for a model village.

Analysis of speckle and material properties in laider tracer

NASA Astrophysics Data System (ADS)

Ross, Jacob W.; Rigling, Brian D.; Watson, Edward A.

2017-04-01

The SAL simulation tool Laider Tracer models speckle: the random variation in intensity of an incident light beam across a rough surface. Within Laider Tracer, the speckle field is modeled as a 2-D array of jointly Gaussian random variables projected via ray tracing onto the scene of interest. Originally, all materials in Laider Tracer were treated as ideal diffuse scatterers, for which the far-field return computed uses the Lambertian Bidirectional Reflectance Distribution Function (BRDF). As presented here, we implement material properties into Laider Tracer via the Non-conventional Exploitation Factors Data System: a database of properties for thousands of different materials sampled at various wavelengths and incident angles. We verify the intensity behavior as a function of incident angle after material properties are added to the simulation.

Final Report for EPSCoR Implementation Award DE-FG02-08ER46528 to University of Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

Egami, Takeshi

With the completion of the Spallation Neutron Source (SNS) and upgrading of the High-Flux Isotope Reactor (HFIR) at the Oak Ridge National Laboratory (ORNL) the state of Tennessee now leads the world in the capability of neutron scattering research. This project aimed at directing the great impact of these facilities to researchers in the EPSCoR states, Tennessee in particular, by creating a research collaboration network around these facilities. The plan consisted of two parts: (1) Direct effort to increase the user base through the travel fellowship for graduate students and faculty from the EPSCoR states to use the neutron facilitiesmore » at the ORNL, and through workshops and schools on the application of neutron scattering, and (2) Research collaboration among the core participants from UTK, ORNL and other states. The EPSCoR Travel Fellowship Program has supported over 300 distinct and 600 cumulative neutron facility users and over 250 workshop participants, with the total of nearly 600 distinct recipients. This program has been highly popular particularly among young faculty members who often have difficulty in raising travel funds, and enabled participation of young graduate students to neutron research. This program has been the foundation of this project. We supported several educational workshops, organized one (“neutrons for novice”) by ourselves each year, targeting non-users of neutron scattering. These efforts significantly contributed to expand the neutron user base among the EPSCoR states. The core research targeted condensed matter physics and soft matter sciences. The core research groups participating in this project include not only researchers from Tennessee but those from Kansas, South Carolina, Puerto Rico and Louisiana, making this project a national, rather than regional, enterprise. Collaborations that were seeded by this project have grown into two major projects, one in materials science (irradiation effects on high-entropy alloys) and the other in soft matter sciences (bio-membranes). Through this project we promoted the use of neutron scattering, particularly in biological and life sciences and in energy sciences, and facilitated the DOE investment in this field to impact wide fields of science and engineering. This project was administered through the Joint Institute for Neutron Sciences (JINS) of the University of Tennessee (UT) and ORNL. JINS is jointly supported by both UT and ORNL, and participate in organizing workshops and schools to promote the use of neutron scattering.« less

The steps to forming a joint venture IPP in Poland

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allen, Z.; Colligan, M.J.

Poland represents the largest market in Central Europe with 38 million people and an installed electrical generating capacity of about 32 gigawatts. Since 1989, when the process of governmental restructuring along free market principals began, the allure to IPP developers has been evident, but is of yet unrealized. The natural model for IPP development in Poland would seem to be joint ventures with Polish generating companies. These enterprises already have sites, franchises, and a going business to contribute to a joint company. There are a number of reasons why so few deals have been concluded in Poland to date, andmore » a number of barriers still exist that tend to hamper the realization of project finance funded power joint ventures. But, these barriers are not insurmountable. Overcoming them in the context of a joint venture relationship with a domestic partner requires patience, work, and an ability to bridge the gaps between the realities of working in a post-Communist environment and the practicalities of structuring projects that can be financed in the international capital markets. The new Energy Law in Poland establishes a framework for a viable private sector power generation business. But the enabling regulations are yet to be published or approved. There is still effective political risk on account of the uncertainty this creates. Pressure is mounting on the Polish Government, especially due to its expressed interest in joining the EU, to get the power sector to operate on private sector terms, if not in private hands. The trends are pointing in the direction of increased market driven policies and practices. The conclusion is that, despite the delays of the past, independent power projects will start to happen in Poland on a joint venture basis, with increasing frequency in the next years.« less

Creation of an Aeronautical Capstone Design Project Program at Ohio State University

DTIC Science & Technology

2014-12-08

Equation 12 below. As Figure 35 shows, a single adhesively bonded lap joint is considered. The epoxy only sees a load in the axial direction. In...lap joint [1] = = ( ) 12 =stress distribution factor = applied load in the axial direction ...Figure 11. The joints are designed to handle the bending loads of horizontal, vertical and angled deployment and are designed to directly load the carbon

The Northeast Ghana Savannah Project--A Case Study in Project Design.

ERIC Educational Resources Information Center

Matlock, W. Gerald; Johnson, Jack D.

This report examines a project design for land degradation problems in the northern and upper regions of Ghana. The project was jointly sponsored by the Ghana Council for Scientific and Industrial Research and the Agency for International Development. The council is responsible for coordinating the activities of 10 independent research institutes.…

Joint Common Architecture Demonstration (JCA Demo) Final Report

DTIC Science & Technology

2016-07-28

approach for implementing open systems [16], formerly known as the Modular Open Systems Approach (MOSA). OSA is a business and technical strategy to... TECHNICAL REPORT RDMR-AD-16-01 JOINT COMMON ARCHITECTURE DEMONSTRATION (JCA DEMO) FINAL REPORT Scott A. Wigginton... Modular Avionics .......................................................................... 5 E. Model-Based Engineering

32 CFR 199.1 - General provisions.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., management control and coordination as required for CHAMPUS, and to develop, issue, and maintain regulations..., to consult with the Secretary of Defense or a designee and to approve and issue joint regulations... an issue joint regulations implementing 10 U.S.C., chapter 55. (iv) Office of CHAMPUS (OCHAMPUS). By...

32 CFR 199.1 - General provisions.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., management control and coordination as required for CHAMPUS, and to develop, issue, and maintain regulations..., to consult with the Secretary of Defense or a designee and to approve and issue joint regulations... an issue joint regulations implementing 10 U.S.C., chapter 55. (iv) Office of CHAMPUS (OCHAMPUS). By...

32 CFR 199.1 - General provisions.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., management control and coordination as required for CHAMPUS, and to develop, issue, and maintain regulations..., to consult with the Secretary of Defense or a designee and to approve and issue joint regulations... an issue joint regulations implementing 10 U.S.C., chapter 55. (iv) Office of CHAMPUS (OCHAMPUS). By...

Raiders of the Lost Art -- Recovering and Implementing the Intellectual Lineage of Campaign Planning for 21st Century Joint Planning

DTIC Science & Technology

2008-10-30

American billionaire and financier Warren Buffett , “is the enemy of good thinking.”42 And there is “bad terminology” spilling from the pages of JP...be productive and become a meaningless catch-all word? 42 Warren Buffett , Berkshire Hathaway, 2001...Harrisburg, PA: The Telegraph Press (1940). Buffett , Warren . Berkshire Hathaway, 2001 Annual Report. Chairman of the Joint Chiefs of Staff. Joint

Interdisciplinary Postdoctoral Training in Global Health Through a Novel Joint Project for Trainees from Diverse Disciplines: Benefits, Risks, and Observations.

PubMed

Oberhelman, Richard A; Huaynate, Cynthia Anticona; Correa, Malena; Malpartida, Holger Mayta; Pajuelo, Monica; Paz-Soldan, Valerie A; Gilman, Robert H; Zimic, Mirko; Murphy, Laura; Belizan, Jose

2017-03-01

Postdoctoral training programs are usually highly individualized arrangements between trainees and a limited number of senior mentors in their field, an approach that contrasts with current trends in public health education that promote interdisciplinary training to spur innovation. Herein, we describe an alternative model for postdoctoral training for a group of fellows from distinct disciplines. Fellows work with mentors from diverse fields to create a joint research project or a group of complementary projects, with the goal of developing a new device, intervention, or innovation to address a global health problem. The perceived benefits, challenges, and limitations of this team approach to interdisciplinary postdoctoral training are presented.

Factors that enable and hinder the implementation of projects in the alcohol and other drug field.

PubMed

MacLean, Sarah; Berends, Lynda; Hunter, Barbara; Roberts, Bridget; Mugavin, Janette

2012-02-01

Few studies systematically explore elements of successful project implementation across a range of alcohol and other drug (AOD) activities. This paper provides an evidence base to inform project implementation in the AOD field. We accessed records for 127 completed projects funded by the Alcohol, Education and Rehabilitation Foundation from 2002 to 2008. An adapted realist synthesis methodology enabled us to develop categories of enablers and barriers to successful project implementation, and to identify factors statistically associated with successful project implementation, defined as meeting all funding objectives. Thematic analysis of eight case study projects allowed detailed exploration of findings. Nine enabler and 10 barrier categories were identified. Those most frequently reported as both barriers and enablers concerned partnerships with external agencies and communities, staffing and project design. Achieving supportive relationships with partner agencies and communities, employing skilled staff and implementing consumer or participant input mechanisms were statistically associated with successful project implementation. The framework described here will support development of evidence-based project funding guidelines and project performance indicators. The study provides evidence that investing project hours and resources to develop robust relationships with project partners and communities, implementing mechanisms for consumer or participant input and attracting skilled staff are legitimate and important activities, not just in themselves but because they potentially influence achievement of project funding objectives. © 2012 The Authors. ANZJPH © 2012 Public Health Association of Australia.

Modeling the Potential Economic Impact of the Medicare Comprehensive Care for Joint Replacement Episode-Based Payment Model.

PubMed

Maniya, Omar Z; Mather, Richard C; Attarian, David E; Mistry, Bipin; Chopra, Aneesh; Strickland, Matt; Schulman, Kevin A

2017-11-01

The Medicare program has initiated Comprehensive Care for Joint Replacement (CJR), a bundled payment mandate for lower extremity joint replacements. We sought to determine the degree to which hospitals will invest in care redesign in response to CJR, and to project its economic impacts. We defined 4 potential hospital management strategies to address CJR: no action, light care management, heavy care management, and heavy care management with contracting. For each of 798 hospitals included in CJR, we used hospital-specific volume, cost, and quality data to determine the hospital's economically dominant strategy. We aggregated data to assess the percentage of hospitals pursuing each strategy; savings to the health care system; and costs and percentages of CJR-derived revenues gained or lost for Medicare, hospitals, and postacute care facilities. In the model, 83.1% of hospitals (range 55.0%-100.0%) were expected to take no action in response to CJR, and 16.1% of hospitals (range 0.0%-45.0%) were expected to pursue heavy care management with contracting. Overall, CJR is projected to reduce health care expenditures by 0.5% (range 0.0%-4.1%) or $14 million (range $0-$119 million). Medicare is expected to save 2.2% (range 2.2%-2.2%), hospitals are projected to lose 3.7% (range 4.7% loss to 3.8% gain), and postacute care facilities are expected to lose 6.5% (range 0.0%-12.8%). Hospital administrative costs are projected to increase by $63 million (range $0-$148 million). CJR is projected to have a negligible impact on total health care expenditures for lower extremity joint replacements. Further research will be required to assess the actual care management strategies adopted by CJR hospitals. Copyright © 2017 Elsevier Inc. All rights reserved.

The selection of the American-Polish joint venture projects for the Krakow program and results of the efforts to date

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gyorke, D.F.; Butcher, T.A.

1995-12-31

To implement the Krakow Clean Fossil Fuels and Energy Efficiency Program, eight U.S. firms were selected by the U.S. Department of Energy to market their technologies to reduce pollution from low emission sources in Krakow. The eight U.S. firms were selected by a competitive solicitation that required the proposing firms to themselves provide funding to match or exceed the funding provided by the Program. These U.S. firms and their Polish partner companies have begun sales and cooperative work efforts in Krakow, and some have already made initial equipment installations with measurable performance improvements. Following their efforts as part of themore » Program, these U.S.-Polish joint ventures will market their technologies and achieve the associated environmental benefits elsewhere in Poland and Eastern and Central Europe. As part of the Krakow Program a spreadsheet model was developed to compare technological options for supplying heat to the city by calculation and comparing the heating costs and associated emissions reduction for each option. Comparison of options is made on the basis of the user cost-per-metric ton of equivalent emissions reduction. For all options considered in the Krakow Program, this cost parameter has ranged from -$1469 (best) to $2650 (worst). The costs for technologies associated with the eight projects in the Krakow Program are at the lower end of this range placing these technologies among the most cost effective solutions to the pollution problems from the low emission sources.« less

Perceived impact and feasibility of strategies to improve access to healthy foods in Washington State, USA.

PubMed

Johnson, Donna B; Quinn, Emilee L; Podrabsky, Mary; Beckwith-Stanley, Nadia; Chan, Nadine; Ellings, Amy; Kovacs, Tricia; Lane, Claire

2013-12-01

The present study measured the perceived impact and political and implementation feasibility of state-level policy strategies related to increasing access to healthy foods and limiting unhealthy foods. Potential state-level policy strategies to improve access to healthy foods were identified through a review of evidence-based literature and policy recommendations. Respondents rated the perceived impact and political and implementation feasibility of each policy on a five-point scale using online surveys. Washington State policy process. Forty-nine content experts (national researchers and subject experts), forty policy experts (state elected officials or their staff, gubernatorial or legislative policy analysts) and forty-five other stakeholders (state-level advocates, programme administrators, food producers). In aggregate, respondents rated policy impact and implementation feasibility higher than political feasibility. Policy experts rated policy strategies as less politically feasible compared with content experts (P < 0·02) or other stakeholders (P < 0·001). Eight policy strategies were rated above the median for impact and political and implementation feasibility. These included policies related to nutrition standards in schools and child-care facilities, food distribution systems, urban planning projects, water availability, joint use agreements and breast-feeding supports. Although they may be perceived as potentially impactful, some policies will be more difficult to enact than others. Information about the potential feasibility of policies to improve access to healthy foods can be used to focus limited policy process resources on strategies with the highest potential for enactment, implementation and impact.

Structural, magnetic properties, and electronic structure of hexagonal FeCoSn compound

NASA Astrophysics Data System (ADS)

Li, Yong; Dai, Xue-Fang; Liu, Guo-Dong; Wei, Zhi-Yang; Liu, En-Ke; Han, Xiao-Lei; Du, Zhi-Wei; Xi, Xue-Kui; Wang, Wen-Hong; Wu, Guang-Heng

2018-02-01

Not Available Project supported by the National Natural Science Foundation of China (Grant Nos. 51431009 and 51271038), the Joint NSFC-ISF Research Program, Jointly Funded by the National Natural Science Foundation of China and the Israel Science Foundation (Grant No. 51561145003).

Enhancing environmental engineering education in Europe

NASA Astrophysics Data System (ADS)

Caporali, Enrica; Tuneski, Atanasko

2013-04-01

In the frame of knowledge triangle: education-innovation-research, the environmental engineering higher education is here discussed with reference to the TEMPUS-Trans European Mobility Programme for University Studies promoted by the European Commission. Among the focused aspects of TEMPUS are curricula harmonization and lifelong learning programme development in higher education. Two are the curricula, since the first TEMPUS project, coordinated in the period 2005-2008 by University of Firenze in cooperation with colleagues of the Ss Cyril and Methodius University, Skopje. The second three years TEMPUS Joint Project denominated DEREL-Development of Environment and Resources Engineering Learning, is active since October 2010. To the consortium activities participate 4 EU Universities (from Italy, Greece, Germany and Austria), 7 Partner Countries (PC) Universities (from FYR of Macedonia, Serbia and Albania), and 1 PC Ministry, 4 PC National Agencies, 1 PC non governmental organization and 1 PC enterprise. The same 4 EU Universities and the same Macedonian Institutions participated at the first TEMPUS JEP entitled DEREC-Development of Environmental and Resources Engineering Curriculum. Both the first and second cycle curriculum, developed through the co-operation, exchange of know-how and expertise between partners, are based on the European Credit Transfer System and are in accordance with the Bologna Process. Within DEREC a new three-years first cycle curriculum in Environmental and Resources Engineering was opened at the University Ss Cyril and Methodius, Skopje, and the necessary conditions for offering a Joint Degree Title, on the basis of an agreement between the Ss. Cyril and Methodius University and the University of Firenze, were fulfilled. The running DEREL project, as a continuation of DEREC, is aimed to introduce a new, up-to-date, postgraduate second cycle curriculum in Environment and Resources Engineering at the Ss Cyril and Methodius University in Skopje, FYR of Macedonia, University of Novi Sad, Serbia and Polytechnic University of Tirana, Albania, following the criteria and conditions for setting up a Joint Postgraduate Degree. The new second cycle degree curriculum has been just activated in the current academic year 2012/2013. In DEREL a second objective is to implement a sustainable regional network aimed to offer lifelong learning seminars for environment and resources engineering education and training of interested stakeholders and organize workshops focused on strengthening the links in the knowledge triangle: environment education-innovation-research, with participation of postgraduate students, public services, enterprises and NGO's.

Operational framework for quantum measurement simulability

NASA Astrophysics Data System (ADS)

Guerini, Leonardo; Bavaresco, Jessica; Terra Cunha, Marcelo; Acín, Antonio

2017-09-01

We introduce a framework for simulating quantum measurements based on classical processing of a set of accessible measurements. Well-known concepts such as joint measurability and projective simulability naturally emerge as particular cases of our framework, but our study also leads to novel results and questions. First, a generalisation of joint measurability is derived, which yields a hierarchy for the incompatibility of sets of measurements. A similar hierarchy is defined based on the number of outcomes necessary to perform a simulation of a given measurement. This general approach also allows us to identify connections between different kinds of simulability and, in particular, we characterise the qubit measurements that are projective-simulable in terms of joint measurability. Finally, we discuss how our framework can be interpreted in the context of resource theories.

49 CFR 633.27 - Implementation of a project management plan.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Implementation of a project management plan. 633... TRANSIT ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROJECT MANAGEMENT OVERSIGHT Project Management Plans § 633.27 Implementation of a project management plan. (a) Upon approval of a project management plan by...

49 CFR 633.27 - Implementation of a project management plan.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 7 2011-10-01 2011-10-01 false Implementation of a project management plan. 633... TRANSIT ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROJECT MANAGEMENT OVERSIGHT Project Management Plans § 633.27 Implementation of a project management plan. (a) Upon approval of a project management plan by...

49 CFR 633.27 - Implementation of a project management plan.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 7 2012-10-01 2012-10-01 false Implementation of a project management plan. 633... TRANSIT ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROJECT MANAGEMENT OVERSIGHT Project Management Plans § 633.27 Implementation of a project management plan. (a) Upon approval of a project management plan by...

49 CFR 633.27 - Implementation of a project management plan.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 7 2014-10-01 2014-10-01 false Implementation of a project management plan. 633... TRANSIT ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROJECT MANAGEMENT OVERSIGHT Project Management Plans § 633.27 Implementation of a project management plan. (a) Upon approval of a project management plan by...

49 CFR 633.27 - Implementation of a project management plan.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 7 2013-10-01 2013-10-01 false Implementation of a project management plan. 633... TRANSIT ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROJECT MANAGEMENT OVERSIGHT Project Management Plans § 633.27 Implementation of a project management plan. (a) Upon approval of a project management plan by...

10 CFR 1021.216 - Procurement, financial assistance, and joint ventures.

Code of Federal Regulations, 2010 CFR

2010-01-01

... a decision on proposals and will include: (1) A brief discussion of the purpose of the procurement... 10 Energy 4 2010-01-01 2010-01-01 false Procurement, financial assistance, and joint ventures... POLICY ACT IMPLEMENTING PROCEDURES DOE Decisionmaking § 1021.216 Procurement, financial assistance, and...

Bayesian and Frequentist Methods for Estimating Joint Uncertainty of Freundlich Adsorption Isotherm Fitting Parameters

EPA Science Inventory

In this paper, we present methods for estimating Freundlich isotherm fitting parameters (K and N) and their joint uncertainty, which have been implemented into the freeware software platforms R and WinBUGS. These estimates were determined by both Frequentist and Bayesian analyse...

GEO-6 project for Galileo data scientific utilization

NASA Astrophysics Data System (ADS)

Buresova, Dalia; Lastovicka, Jan; Boska, Josef; Sauli, Petra; Kouba, Daniel; Mosna, Zbysek

The future GNSS Galileo system offer a number of benefits (e.g. availability of better accuracy positioning, new frequencies bands allowing the implementation of specific techniques, provable time-stamp and location data using SIS authorisation, integrity, better support ad-hoc algorithms for data analysis and other service guarantee for liability and regulated applications) are widely spread among different disciplines. Also applications which are less interesting from the commercial and market point of view could successfully contribute to the numerous social benefits and support the innovation in the international research. The aim of the GEO-6 project "Scientific research Using GNSS" is to propose and broaden scientific utilization of future GNSS Galileo system data in research. It is a joint project of seven institutions from six countries led by the Atos Origin Company from Spain. The core of the project consists from six projects in five priority areas: PA-1 Remote sensing of the ocean using GNSS reflections, PA-2a Investigating GNSS ionospheric data assimilation, PA-2b 3-D gravity wave detection and determination (both PA-2a and PA-2b are ionospheric topics), PA-3 Demonstration of capability for operational forecasting of atmospheric delays, PA-4 GNSS seismometer, PA-5 Spacecraft formation flying using global navigation satellite systems. Institute of Atmospheric Physics, Prague, Czech Republic is responsible for the project PA-2b, where we developed and tested (to the extent allowed by available data) an algorithm and computer code for the 3-D detection of gravity waves and determination of their characteristics. The main drivers of the GEO-6 project are: high levels of accuracy even with the support of local elements, sharing of solutions and results for the worldwide scientific community. The paper will present basic description of the project with more details concerning Czech participation in it.

Healthy Municipios in Latin America.

PubMed

Restrepo, H E; Llanos, G; Contreras, A; Rocabado, F; Gross, S; Suárez, J; González, J

1995-09-01

This article describes the Healthy Municipios movement in Latin America and gives examples of some PAHO projects that could become demonstration projects. The Healthy Municipios movement was established in the early 1990s. The movement aims to promote healthy municipalities according to objectives set forth in the 1987 Ottawa Charter on Health Promotion, the 1992 Declaration of Bogota, and the 1993 Caribbean Health Promotion Charter. The movement is a joint effort of government, the health sector, and the community in promoting health locally. Key features of the movement are its creativity, variety, political strength, and adaptation to local conditions. Technical cooperation serves the purpose of facilitating information exchange and promotes the use of modern techniques of analysis and scientific and technical information. All projects shared the following common features: initiation by the local community with strong political commitment, intersectoral organizational structure, widespread community mobilization and participation, problem solving activities, and a recognizable leader. Pioneering projects include the Comprehensive Project for Cienfuegos, Cuba; the Health Manizales, Colombia; the Network in Mexico; Baruta and El Hatillo, Venezuela; Valdivia, Chile; and San Carlos Canton, Costa Rica. It is concluded that these projects and most others aim to assure equity. These efforts are important for placing health on the political agenda and implementing healthy policies. The Valdivia project, for example, serves a population of about 120,000 in the urban city of Valdivia, the semi-urban area, and rural areas. The project was officially sanctioned by the President of Chile on World Health Day in 1993. Progress was reported in mass communication and school-based programs. Attention was directed also to prevention of risk factors for noncommunicable diseases and to the problem of traffic accidents.

Implementation of Multiple Intelligences Supported Project-Based Learning in EFL/ESL Classrooms

ERIC Educational Resources Information Center

Bas, Gokhan

2008-01-01

This article deals with the implementation of Multiple Intelligences supported Project-Based learning in EFL/ESL Classrooms. In this study, after Multiple Intelligences supported Project-based learning was presented shortly, the implementation of this learning method into English classrooms. Implementation process of MI supported Project-based…

Reduced heat input keyhole welding through improved joint design

NASA Technical Reports Server (NTRS)

Sanders, John M. (Inventor); Harwig, Dennis D. (Inventor)

1993-01-01

An improved high energy density welding method for reducing input keyhole welding prepares the weld joint (8) between two edges (10, 14) of at least one member by separating the edges (10, 14) of the member (12, 16) with a controllable gap (22) by a projecting portion (24) selectively positioned on one edge (10, 14) of the member (12, 16). The projecting portion (24) closely abuts the other edge of the member for maintaining the controlled distance (d) of the controllable gap (22) to enhance the welding method.

Cooperative research and development agreements at METC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ludlow, J.C.; Jarr, L.A.; Anderson, R.J.

1995-06-01

The Federal Technology Transfer Act of 1986 (P.L. 99-502) provided a new mechanism for joint research between private parties and the Morgantown Energy Technology Center (METC). Joint projects under this law are called Cooperative Research And Development Agreements (CRADAs) and are simply agreements between METC and the private sector to work together on a mutually beneficial project. Of primary interest to METC is the development and deployment of: (1) clean, efficient power generation technologies, (2) technologies for the characterization and exploitation of the Nation`s natural gas resource, and (3) environmental remediation technologies.

Health, Environment and Social Management in Enterprises programme in the Republic of Macedonia.

PubMed

Karadzinska-Bislimovska, Jovanka; Baranski, Boguslaw; Risteska-Kuc, Snezana

2004-01-01

Macedonia is the first country in the region to launch implementation of the WHO Health, Environment and Social Management in Enterprises (HESME) Programme, following the WHO Ministerial Conference on Environment and Health held in London in 1999. The aim of this paper is to describe the efforts made to implement this programme. Methods are based on integrated management with joint involvement of crucial partners at all levels of activities suggested by the WHO. Commitment to inter-sectorial and interagency collaboration at national level, adoption of a final version of a National HESME Plan, with basic principles, criteria and concrete activities, establishment of a National coordination center for the HESME Project, development of training curricula and specific educational tools for occupational health personnel, preparation of questionnaires and procedures for a national survey to detect high occupational risks, specific occupational hazards and health promotion needs of the working population, and finally setting up quantitative and qualitative indicators for national or provincial workplace health profiles. Building up the concept of cooperation, partnership and common work in HESME activities is a challenge for the new public health view in Europe.

Disaster Monitoring and Emergency Response Services in China

NASA Astrophysics Data System (ADS)

Wu, J.; Han, X.; Zhou, Y.; Yue, P.; Wang, X.; Lu, J.; Jiang, W.; Li, J.; Tang, H.; Wang, F.; Li, X.; Fan, J.

2018-04-01

The Disaster Monitoring and Emergency Response Service(DIMERS) project was kicked off in 2017 in China, with the purpose to improve timely responsive service of the institutions involved in the management of natural disasters and man-made emergency situations with the timely and high-quality products derived from Space-based, Air-based and the in-situ Earth observation. The project team brought together a group of top universities and research institutions in the field of Earth observations as well as the operational institute in typical disaster services at national level. The project will bridge the scientific research and the response services of massive catastrophe in order to improve the emergency response capability of China and provide scientific and technological support for the implementation of the national emergency response strategy. In response to the call for proposal of "Earth Observation and Navigation" of 2017 National Key R&D Program of China, Professor Wu Jianjun, the deputy chairman of Faculty of Geographical Science of Beijing Normal University, submitted the Disaster Monitoring and Emergency Response Service (DIMERS) project, jointly with the experts and scholars from Institute of Remote Sensing and Digital Earth, Chinese Academy of Sciences, Wuhan University, China Institute of Earthquake Forecasting of China Earthquake Administration and China Institute of Water Resources and Hydropower Science. After two round evaluations, the proposal was funded by Ministry of Science and Technology of China.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Littlefield, Adriane C.; Munir, Ammar M.; Alnajjar, Abdalla Abdelaziz

This report describes the findings of the effort initiated by the Arab Science and Technology Foundation and the Cooperative Monitoring Center at Sandia National Laboratories to identify, contact, and engage members of the Iraqi science and technology (S&T) community. The initiative is divided into three phases. The first phase, the survey of the Iraqi scientific community, shed light on the most significant current needs in the fields of science and technology in Iraq. Findings from the first phase will lay the groundwork for the second phase that includes the organization of a workshop to bring international support for the initiative,more » and simultaneously decides on an implementation mechanism. Phase three involves the execution of outcomes of the report as established in the workshop. During Phase 1 the survey team conducted a series of trips to Iraq during which they had contact with nearly 200 scientists from all sections of the country, representing all major Iraqi S&T specialties. As a result of these contacts, the survey team obtained over 450 project ideas from Iraqi researchers. These projects were revised and analyzed to identify priorities and crucial needs. After refinement, the result is approximately 170 project ideas that have been categorized according to their suitability for (1) developing joint research projects with international partners, (2) engaging Iraqi scientists in solving local problems, and (3) developing new business opportunities. They have also been ranked as to high, medium, or low priority.« less

The application of the unmanned aerial vehicle remote sensing technology in the FAST project construction

NASA Astrophysics Data System (ADS)

Zhu, Boqin

2015-08-01

The purpose of using unmanned aerial vehicle (UAV) remote sensing application in Five-hundred-meter aperture spherical telescope (FAST) project is to dynamically record the construction process with high resolution image, monitor the environmental impact, and provide services for local environmental protection and the reserve immigrants. This paper introduces the use of UAV remote sensing system and the course design and implementation for the FAST site. Through the analysis of the time series data, we found that: (1) since the year 2012, the project has been widely carried out; (2) till 2013, the internal project begun to take shape;(3) engineering excavation scope was kept stable in 2014, and the initial scale of the FAST engineering construction has emerged as in the meantime, the vegetation recovery went well on the bare soil area; (4) in 2015, none environmental problems caused by engineering construction and other engineering geological disaster were found in the work area through the image interpretation of UAV images. This paper also suggested that the UAV technology need some improvements to fulfill the requirements of surveying and mapping specification., including a new data acquisition and processing measures assigned with the background of highly diverse elevation, usage of telephoto camera, hierarchical photography with different flying height, and adjustment with terrain using the joint empty three settlement method.

Integrating grant-funded research into the undergraduate biology curriculum using IMG-ACT.

PubMed

Ditty, Jayna L; Williams, Kayla M; Keller, Megan M; Chen, Grischa Y; Liu, Xianxian; Parales, Rebecca E

2013-01-01

It has become clear in current scientific pedagogy that the emersion of students in the scientific process in terms of designing, implementing, and analyzing experiments is imperative for their education; as such, it has been our goal to model this active learning process in the classroom and laboratory in the context of a genuine scientific question. Toward this objective, the National Science Foundation funded a collaborative research grant between a primarily undergraduate institution and a research-intensive institution to study the chemotactic responses of the bacterium Pseudomonas putida F1. As part of the project, a new Bioinformatics course was developed in which undergraduates annotate relevant regions of the P. putida F1 genome using Integrated Microbial Genomes Annotation Collaboration Toolkit, a bioinformatics interface specifically developed for undergraduate programs by the Department of Energy Joint Genome Institute. Based on annotations of putative chemotaxis genes in P. putida F1 and comparative genomics studies, undergraduate students from both institutions developed functional genomics research projects that evolved from the annotations. The purpose of this study is to describe the nature of the NSF grant, the development of the Bioinformatics lecture and wet laboratory course, and how undergraduate student involvement in the project that was initiated in the classroom has served as a springboard for independent undergraduate research projects. Copyright © 2012 International Union of Biochemistry and Molecular Biology, Inc.

Robust inverse kinematics using damped least squares with dynamic weighting

NASA Technical Reports Server (NTRS)

Schinstock, D. E.; Faddis, T. N.; Greenway, R. B.

1994-01-01

This paper presents a general method for calculating the inverse kinematics with singularity and joint limit robustness for both redundant and non-redundant serial-link manipulators. Damped least squares inverse of the Jacobian is used with dynamic weighting matrices in approximating the solution. This reduces specific joint differential vectors. The algorithm gives an exact solution away from the singularities and joint limits, and an approximate solution at or near the singularities and/or joint limits. The procedure is here implemented for a six d.o.f. teleoperator and a well behaved slave manipulator resulted under teleoperational control.

Segmented instrumentation tube including a locking sleeve for interlocking the segments of the instrumentation tube

DOEpatents

Obermeyer, F.D.

1993-11-16

Segmented instrumentation tube including a locking sleeve for interlocking the segments of the instrumentation tube, so that the threaded ends of the instrumentation tube do not unthread when subjected to vibration, such an instrumentation tube being suitable for use in a nuclear reactor pressure vessel. The instrumentation tube has a first member having a threaded end portion that has a plurality of first holes circumferentially around the outside surface thereof. The instrumentation tube also has a second member having a threaded end portion that has a plurality of second holes circumferentially around the outside surface thereof. The threads of the second member are caused to threadably engage the threads of the first member for defining a threaded joint there between. A sleeve having an inside surface surrounds the end portion of the first member and the end portion of the second member and thus surrounds the threaded joint. The sleeve includes a plurality of first projections and second projections that outwardly extend from the inside surface to engage the first holes and the second holes, respectively. The outside surface of the sleeve is crimped or swaged at the locations of the first projections and second projections such that the first projections and the second projections engage their respective holes. In this manner, independent rotation of the first member with respect to the second member is prevented, so that the instrumentation tube will not unthread at its threaded joint. 10 figures.

Segmented instrumentation tube including a locking sleeve for interlocking the segments of the instrumentation tube

DOEpatents

Obermeyer, Franklin D.

1993-01-01

Segmented instrumentation tube including a locking sleeve for interlocking the segments of the instrumentation tube, so that the threaded ends of the instrumentation tube do not unthread when subjected to vibration, such an instrumentation tube being suitable for use in a nuclear reactor pressure vessel. The instrumentation tube has a first member having a threaded end portion that has a plurality of first holes circumferentially around the outside surface thereof. The instrumentation tube also has a second member having a threaded end portion that has a plurality of second holes circumferentially around the outside surface thereof. The threads of the second member are caused to threadably engage the threads of the first member for defining a threaded joint therebetween. A sleeve having an inside surface surrounds the end portion of the first member and the end portion of the second member and thus surrounds the threaded joint. The sleeve includes a plurality of first projections and second projections that outwardly extend from the inside surface to engage the first holes and the second holes, respectively. The outside surface of the sleeve is crimped or swaged at the locations of the first projections and second projections such that the first projections and the second projections engage their respective holes. In this manner, independent rotation of the first member with respect to the second member is prevented, so that the instrumentation tube will not unthread at its threaded joint.

Apollo Soyuz Test Project Commemorative plaque in orbit

NASA Image and Video Library

1975-07-17

AST-05-263 (17-18 July 1975) --- The Apollo-Soyuz Test Project (ASTP) Commemorative Plaque is assembled in the Soviet Soyuz Orbital Module during the joint U.S.-USSR Apollo-Soyuz Test Project docking mission in Earth orbit. The plaque is written both in English and Russian.

Interagency Evaluation of the Section 1206 Global Train and Equip Program

DTIC Science & Technology

2009-08-31

Capabilities, Joint Staff, U.S. Africa Command, U.S. Central Command, U.S Joint Forces Command, U.S. Pacific Command, U.S. Southern Command, U.S. Special...Intensity Conflict & Interdependent Capabilities; Commanders of U.S. Africa Command, U.S. Central Command, U.S. Joint Forces Command, U.S. Pacific... Central Command, commented that coordinating the Section 1206 project proposal with the partner nation prior to submission would inflate the

Working Partnerships: A Joint Venture in Vocational Education.

ERIC Educational Resources Information Center

Campbell, Clifton P.

Joint Ventures in Vocational Education projects link participating businesses with secondary vocational programs in a cooperative relationship. These are voluntary arrangements between vocational programs and a public or private sector agency that combine the energies and resources of the partners to enrich various aspects of the vocational…

Information Retrieval (SPIRES) and Library Automation (BALLOTS) at Stanford University.

ERIC Educational Resources Information Center

Ferguson, Douglas, Ed.

At Stanford University, two major projects have been involved jointly in library automation and information retrieval since 1968: BALLOTS (Bibliographic Automation of Large Library Operations) and SPIRES (Stanford Physics Information Retrieval System). In early 1969, two prototype applications were activated using the jointly developed systems…

Engineering studies on joint bar integrity, part I : field surveys and observed failure modes

DOT National Transportation Integrated Search

2014-04-02

This paper is the first of a two-part series describing a : research project, sponsored by the Federal Railroad : Administration (FRA), to study the structural integrity of joint : bars. In Part I of this series, observations from field surveys : con...

Joint Models of Longitudinal and Time-to-Event Data with More Than One Event Time Outcome: A Review.

PubMed

Hickey, Graeme L; Philipson, Pete; Jorgensen, Andrea; Kolamunnage-Dona, Ruwanthi

2018-01-31

Methodological development and clinical application of joint models of longitudinal and time-to-event outcomes have grown substantially over the past two decades. However, much of this research has concentrated on a single longitudinal outcome and a single event time outcome. In clinical and public health research, patients who are followed up over time may often experience multiple, recurrent, or a succession of clinical events. Models that utilise such multivariate event time outcomes are quite valuable in clinical decision-making. We comprehensively review the literature for implementation of joint models involving more than a single event time per subject. We consider the distributional and modelling assumptions, including the association structure, estimation approaches, software implementations, and clinical applications. Research into this area is proving highly promising, but to-date remains in its infancy.

Analyzing multicomponent receptive fields from neural responses to natural stimuli

PubMed Central

Rowekamp, Ryan; Sharpee, Tatyana O

2011-01-01

The challenge of building increasingly better models of neural responses to natural stimuli is to accurately estimate the multiple stimulus features that may jointly affect the neural spike probability. The selectivity for combinations of features is thought to be crucial for achieving classical properties of neural responses such as contrast invariance. The joint search for these multiple stimulus features is difficult because estimating spike probability as a multidimensional function of stimulus projections onto candidate relevant dimensions is subject to the curse of dimensionality. An attractive alternative is to search for relevant dimensions sequentially, as in projection pursuit regression. Here we demonstrate using analytic arguments and simulations of model cells that different types of sequential search strategies exhibit systematic biases when used with natural stimuli. Simulations show that joint optimization is feasible for up to three dimensions with current algorithms. When applied to the responses of V1 neurons to natural scenes, models based on three jointly optimized dimensions had better predictive power in a majority of cases compared to dimensions optimized sequentially, with different sequential methods yielding comparable results. Thus, although the curse of dimensionality remains, at least several relevant dimensions can be estimated by joint information maximization. PMID:21780916

Final Report: Superconducting Joints Between (RE)Ba 2Cu 3O 7-x Coated Conductors via Electric Field Assisted Processing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schwartz, Justin

Here we report the results from a project aimed at developing a fully superconducting joint between two REBCO coated conductors using electric field processing (EFP). Due to a reduction in the budget and time period of this contract, we reduced the project scope and focused first on the key scientific issues for forming a strong bond between conductors, and subsequently focused on improving through-the-joint transport. A modified timeline and task list is shown in Table 1, summarizing accomplishments to date. In the first period, we accomplished initial surface characterization as well as rounds of EFP experiments to begin to understandmore » processing parameters which produce well-bonded tapes. In the second phase, we explored the effects of two fundamental EFP parameters, voltage and pressure, and the limitations they place on the process. In the third phase, we achieved superconducting joints and established base characteristics of both the bonding process and the types of tapes best suited to this process. Finally, we investigated some of the parameters related to kinetics which appeared inhibit joint quality and performance.« less

Production of Copper-Plated Beamline Bellows and Spools for LCLS-II

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, Katherine M.; Carpenter, Brian C.; Daly, Ed

The SLAC National Accelerator Laboratory is currently constructing a major upgrade to its accelerator, the Linac Coherent Light Source II (LCLS-II). Several Department of Energy national laboratories, including the Thomas Jefferson National Accelerator Facility (JLab) and Fermi National Accelerator Laboratory (FNAL), are participating in this project. The 1.3-GHz cryomodules for this project consist of eight cavities separated by bellows (expansion joints) and spools (tube sections), which are copper plated for RF conduction. JLab is responsible for procurement of these bellows and spools, which are delivered to JLab and FNAL for assembly into cryomodules. Achieving accelerator-grade copper plating is always amore » challenge and requires careful specification of requirements and application of quality control processes. Due to the demanding technical requirements of this part, JLab implemented procurement strategies to make the process more efficient as well as provide process redundancy. This paper discusses the manufacturing challenges that were encountered and resolved, as well as the strategies that were employed to minimize the impact of any technical issues.« less

Collaborating at a Regional Scale for Climate Literacy and Action

NASA Astrophysics Data System (ADS)

Carlton, C.; Shcherba, O.

2016-12-01

Since 2014, the Bay Area Climate Literacy Impact Collaborative (Bay-CLIC) has been the leading regional consortium dedicated to improving climate education and action. Collectively, Bay-CLIC members reach over 3 million individuals through their educational programming, serve counties all throughout the Bay Area, offer multiple methods of climate communication like place-based school programs and visitor centers, and serve audiences representing all age groups. With over 30 organizations ranging from park agencies to science museums and nonprofits promoting energy efficiency, Bay-CLIC is preparing to push out climate change messaging through a suite of projects. Currently, Bay-CLIC's work is centered on building connections between educators and local scientists and region-specific climate data, implementing joint campaigns to promote the social norming of sustainable behavior change, and developing a toolkit and trainings targeted to the needs of Bay Area environmental educators. Meeting the needs of this diverse group offers many opportunities for increasing impact, growing new, strategic partnerships, as well as overcoming a few challenges along the way. Come learn more about what we've accomplished so far and what new, exciting projects are coming down the pike.

43 CFR 8.0 - Acquisition of lands for reservoir projects.

Code of Federal Regulations, 2014 CFR

2014-10-01

... projects. 8.0 Section 8.0 Public Lands: Interior Office of the Secretary of the Interior JOINT POLICIES OF THE DEPARTMENTS OF THE INTERIOR AND OF THE ARMY RELATIVE TO RESERVOIR PROJECT LANDS § 8.0 Acquisition of lands for reservoir projects. In so far as permitted by law, it is the policy of the Departments...

43 CFR 8.0 - Acquisition of lands for reservoir projects.

Code of Federal Regulations, 2013 CFR

2013-10-01

... projects. 8.0 Section 8.0 Public Lands: Interior Office of the Secretary of the Interior JOINT POLICIES OF THE DEPARTMENTS OF THE INTERIOR AND OF THE ARMY RELATIVE TO RESERVOIR PROJECT LANDS § 8.0 Acquisition of lands for reservoir projects. In so far as permitted by law, it is the policy of the Departments...

43 CFR 8.0 - Acquisition of lands for reservoir projects.

Code of Federal Regulations, 2010 CFR

2010-10-01

... projects. 8.0 Section 8.0 Public Lands: Interior Office of the Secretary of the Interior JOINT POLICIES OF THE DEPARTMENTS OF THE INTERIOR AND OF THE ARMY RELATIVE TO RESERVOIR PROJECT LANDS § 8.0 Acquisition of lands for reservoir projects. In so far as permitted by law, it is the policy of the Departments...

43 CFR 8.0 - Acquisition of lands for reservoir projects.

Code of Federal Regulations, 2011 CFR

2011-10-01

... projects. 8.0 Section 8.0 Public Lands: Interior Office of the Secretary of the Interior JOINT POLICIES OF THE DEPARTMENTS OF THE INTERIOR AND OF THE ARMY RELATIVE TO RESERVOIR PROJECT LANDS § 8.0 Acquisition of lands for reservoir projects. In so far as permitted by law, it is the policy of the Departments...

Parents' Adoption of Social Communication Intervention Strategies: Families Including Children with Autism Spectrum Disorder Who are Minimally Verbal

PubMed Central

Goods, Kelly; Shih, Wendy; Mucchetti, Charlotte; Kaiser, Ann; Wright, Courtney; Mathy, Pamela; Landa, Rebecca; Kasari, Connie

2015-01-01

Notably absent from the intervention literature are parent training programs targeting school-aged children with autism who have limited communication skills (Tager-Flusberg and Kasari in Autism Res 6:468–478, 2013). Sixty-one children with autism age 5–8 with minimal spontaneous communication received a 6-month social communication intervention including parent training. Parent–child play interactions were coded for parents' strategy implementation and children's time jointly engaged (Adamson et al. in J Autism Dev Disord 39:84–96, 2009). Parents mastered an average of 70 % of the strategies. Further analyses indicated some gains in implementation occurred from mere observation of sessions, while the greatest gains occurred in the first month of active coaching and workshops. Children's joint engagement was associated with parents' implementation success across time demonstrating parents' implementation was relevant to children's social engagement. PMID:25475363

Parents' Adoption of Social Communication Intervention Strategies: Families Including Children with Autism Spectrum Disorder Who are Minimally Verbal.

PubMed

Shire, Stephanie Y; Goods, Kelly; Shih, Wendy; Distefano, Charlotte; Kaiser, Ann; Wright, Courtney; Mathy, Pamela; Landa, Rebecca; Kasari, Connie

2015-06-01

Notably absent from the intervention literature are parent training programs targeting school-aged children with autism who have limited communication skills (Tager-Flusberg and Kasari in Autism Res 6:468-478, 2013). Sixty-one children with autism age 5-8 with minimal spontaneous communication received a 6-month social communication intervention including parent training. Parent-child play interactions were coded for parents' strategy implementation and children's time jointly engaged (Adamson et al. in J Autism Dev Disord 39:84-96, 2009). Parents mastered an average of 70% of the strategies. Further analyses indicated some gains in implementation occurred from mere observation of sessions, while the greatest gains occurred in the first month of active coaching and workshops. Children's joint engagement was associated with parents' implementation success across time demonstrating parents' implementation was relevant to children's social engagement.

A Prospective Emergency Department Quality Improvement Project to Improve the Treatment of Vaso-Occlusive Crisis in Sickle Cell Disease: Lessons Learned.

PubMed

Tanabe, Paula; Freiermuth, Caroline E; Cline, David M; Silva, Susan

2017-03-01

Guidelines recommend rapid, aggressive management of vaso-occlusive crisis (VOC) for patients with sickle cell disease (SCD). A large prospective research and quality improvement (QI) project was conducted to measure changes in clinical outcomes in two EDs-academic medical centers with emergency medicine residency programs and Level 1 trauma centers-during a 2.5-year time period (October 2011-March 2014). A QI team used a Plan-Do-Study-Act approach to modify and implement changes to opioid analgesic protocols for the emergency department (ED) treatment of VOC. Data were collected quarterly; the team reviewed the results and made modifications to improve outcomes. A structured health record review was conducted to assess clinical outcomes (10 records/quarter/site). Patient interviews were conducted to measure satisfaction with pain management. Outcomes were compared before (T1) and after (T2) implementation of an electronic health record (EHR). One hundred ninety-six ED health records (118 unique patients, mean age = 32 [standard deviation, 11], 51% male) were analyzed. Before implementation, trends in decreasing time to initial analgesic administration were noted. There was a statistically significant increase in arrival to administration of first analgesic time between T1 and T2 at Site 1 but not at Site 2. Neither site showed significant changes in time between the administration of the first and second opioid doses, total opioid dose administered, or patient satisfaction. While QI efforts initially shortened door-to-analgesic times, these gains were not sustained. The lessons learned can help other EDs improve the timely delivery of analgesics to patients with SCD. Copyright © 2016 The Joint Commission. Published by Elsevier Inc. All rights reserved.

Rural water supply and related services in developing countries — Comparative analysis of several approaches

NASA Astrophysics Data System (ADS)

Bajard, Y.; Draper, M.; Viens, P.

1981-05-01

The proposed paper deals with a comparative analysis of several approaches possible and actually used for a joint action of local institutions and foreign aid in the field of water supply and related services such as sanitation to villages and small rural agglomerations (market towns, etc.) in developing countries. This comparative analysis is based on examples of actual programmes in this field. The authors have participated in most of the programmes selected as examples, at various levels and in various capacities, from conception to design, implementation and/or evaluation (i.e. rural development programmes in Ivory Coast, Ghana (upper region), Benin and Ethiopia. The authors were not involved in other examples such as water supply and/or sanitation to small urban centres in Benin, Ivory Coast, etc. They have, however, witnessed them directly and have obtained, therefore, first-hand information on their organization, execution and results. Several typical examples of actual projects are briefly defined and characterized. The paper undertakes, then, to compare, in a clinical fashion, the advantages and drawbacks of the approaches taken in the various examples presented. The paper finally proposes a recommendation for a realistic approach to joint action between local/domestic and foreign financing/assistance agencies and executing bodies (consultants, contractors) in the field of rural water supply, sanitation, and more generally, health improvement. The definition of this line of approach is made in terms of logical framework, i.e. goals, purposes, outputs and inputs at the various stages of the project, up to actual evaluation of execution and impact if possible; description of practical indicators of the two types of evaluation. A particular attention is given to the problems of technological choices, in view of the constraints imposed by the natural environment, by the human and social patterns; in view also of the institutions and the economy. Another point of importance taken into consideration by the paper is the problem of information, education, and support to users for the introduction, implementation, operation and maintenance of technical developments at village level. Conclusions are drawn as to the relative advantages of this approach over the "classical" approach and its replicability.

Six teachers' experience with a video-based professional development program: Its implementation and development

NASA Astrophysics Data System (ADS)

Nelson, Marianne T.

Many professional development programs fall short of accomplishing their objectives. Recently, programs have been developed that would appear to appeal to teachers and to enhance their potential to influence teachers' practice. My research describes six teachers' responses to a professional development program that employs video as a key feature. The Next Move program consists of eight two-hour sessions, and includes a one-hour video intended to stimulate discussion among a group of teachers. All group participants were invited to participate in the study. My interview sample consisted of six teachers from two groups who volunteered to participate in the study. The first group consisted of four study participants from an urban district. Twelve teachers from this district attended the initial session. Of these, seven became regular participants who completed all sessions. Most of them registered for the graduate credit option. Two study participants were from a single suburban elementary school that had five teachers; they occasionally met jointly with a group from another elementary school, so the numbers varied. Teachers volunteering for this study had from four to seventeen years experience. They were all Caucasian and included four women and two men. My data set consists of three interviews with each teacher, one at the start of the program, one after the last session, and one at the end of the school year. I interviewed each facilitator and jointly interviewed the program's producer and project manager. Additional data was obtained from observation of program sessions and classrooms. Print data sources were the program guide and the project summative evaluation. The data analysis suggests a poor match between the funder's intent and what the teachers expected, based on the program title and information in the promotional flyer. Because of these discontinuities, the program failed to meet its objectives fully. However, some interesting benefits did appear. For example, the classroom clips did focus teachers' discussion on pedagogical issues. Each participant, over the short duration of the study, did implement at least one program idea, and several teachers mentioned continuing conversations they had begun during program sessions.

Interprofessional Learning – Development and Implementation of Joint Medical Emergency Team Trainings for Medical and Nursing Students at Universitätsmedizin Greifswald

PubMed Central

Partecke, Maud; Balzer, Claudius; Finkenzeller, Ingmar; Reppenhagen, Christiane; Hess, Ulrike; Hahnenkamp, Klaus; Meissner, Konrad

2016-01-01

Introduction: Interprofessional collaboration is of great importance in clinical practice, particularly in the field of emergency medicine. The professions involved in providing emergency care must work hand in hand, and tasks and routines must be coordinated effectively. However, medical and nursing students have only few opportunities to experience interprofessional cooperation during their formal training. Addressing this situation, the Department of Anesthesiology and the Vocational School of Greifswald University Medical School initiated a project to increase patient safety by integrating interprofessional human factor training into the curriculum of both health professions. This manuscript addresses how an interprofessional course module focusing on clinical emergency medicine can be taught with an emphasis on competency and problem-solving. In addition, it was important to identify suitable instruments for systematic quality development and assurance of this teaching and learning format. Project description: The aim of the project, which took place from October 2013 to September 2015, was the development, implementation and evaluation of a simulation-based, interprofessional course module on clinical emergency medicine. Target groups were medical and nursing students. Modern pedagogical models and methods were applied to the design and teaching of the course content. The project was carried out in separate phases: definition, planning, practical implementation, evaluation and documentation. The project was accompanied by systematic quality development. Established guidelines for quality-centered school development were applied to quality development, assurance and evaluation. Results: Over two years, a 16 credit-hour course module was developed and then taught and evaluated during the 2014 and 2015 summer semesters. A total of 120 medical students and 120 nursing students participated in the course module. Eighteen teachers from medicine and nursing were trained as instructors and assisted by 12 student tutors. Regular evaluations focused on different aspects of the project, using instruments for empirical educational research. Excellent ratings given to the course by the attendees indicate a high degree of satisfaction in both participating professions regarding course design and content, as well as the quality of teaching. Discussion: In a position paper, the GMA committee on Interprofessional Education in Health Professions issued recommendations for interprofessional education. The recommendations given for teaching and quality assurance are drawn upon here, and relevant examples from the course concept presented. Conclusion: The design of the course corresponds to the recommendations of the GMA committee on Interprofessional Education in the Health Professions. Based on these, and considering the satisfactory evaluations, both continuation and further development of this interprofessional teaching format are justified. PMID:27280143

77 FR 52022 - Notification of a Joint Public Teleconference of the Chartered Science Advisory Board and Board...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-28

... Counselors (BOSC) to discuss a draft report providing advice on implementation of Office of Research and... discuss a draft report providing advice on implementation of ORD's new strategic directions for research... report. Additional information about SAB and BOSC advice on implementing ORD strategic research...

[Carpus and distal radioulnar joint : Clinical and radiological examination].

PubMed

Spies, C K; Langer, M F; Unglaub, F; Mühldorfer-Fodor, M; Müller, L P; Ahrens, C; Schlindwein, S F

2016-08-01

A precise medical history and specific symptom-oriented clinical tests of the wrist joint should always precede any radiological, computed tomography (CT) or magnetic resonance imaging (MRI) diagnostics. In many cases, specific clinical tests of the wrist joint allow at least a preliminary diagnosis, which can be supported by standard radiography using correct projections. A systematic approach is recommended covering the radiocarpal, midcarpal, ulnocarpal and distal radioulnar joints. Exact identification of the palpable anatomic landmarks is mandatory for correct application and interpretation of the various clinical tests. The results of the clinical tests in combination with radiological imaging can often detect precisely ruptures of distinct wrist joint ligaments and localized arthritis.

The Canada/China Teacher Education Project: A Chinese Initiative.

ERIC Educational Resources Information Center

Fahmy, Jane Jackson; And Others

In 1991, Saint Mary's University (SMU) (Canada) and Beijing Normal University (BNU) (China) began an 18-month joint teacher education project intended to meet professional needs of BNU foreign language teachers. The project had three components: professional development of teachers; adaptation of the existing national curriculum to meet special…

76 FR 77219 - Federal Energy Regulatory Commission Combined Notice of Filings #1

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-12

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Combined Notice of Filings 1 Take notice.... Applicants: Caney River Wind Project, LLC, Rocky Ridge Wind Project, LLC. Description: Joint Application for..., Request for Expedited Consideration and Confidential Treatment of Caney River Wind Project, LLC, et al...

DEMONSTRATION PROJECT FOR THE ABATEMENT OF NITROGEN OXIDES EMISSIONS USING REBURN TECHNOLOGY FOR COGENERATION PLANTS IN TAIWAN

EPA Science Inventory

The report summarizes the key technical results of a joint demonstration project between the U.S. Environmental Protection Agency and the Taiwan Environmental Protection Administration. The project demonstrated that coal reburning can be used to reduce nitrogen oxides (NOX) emiss...

The JASON Project: Ghosts of Ancient Fighting Ships.

ERIC Educational Resources Information Center

Carey, Helen H.; Greenberg, Judith E.

1989-01-01

Describes the JASON project, a joint project of the National Council for Social Studies and the National Science Teachers Association. Provides a sample lesson on the Punic Wars in which students study the relationship between shipbuilding and Rome's ascendancy to power. Explores the links among technology, science, and social studies. (RW)

The Nordwrite Project.

ERIC Educational Resources Information Center

Evensen, Lars, Sigfred

A planned 3-year joint project of the Nordic research council for the humanities that focuses on writing development in school-age children is described. Four Nordic countries are involved in the project: Finland, Sweden, Norway, and Denmark. In the study, discourse-level performance analyses of student writing in English as a Second Language are…

SUMMARY OF JOINT DOD, EPA RESEARCH TO CONTROL VOC AND TOXIC EMISSIONS

EPA Science Inventory

The paper summarizes the results of joint projects conducted during last 6 years by the Department of Defense and EPA to control volatile organic compounds (VOCs) and toxic emissions. ajor emphasis has been on product coating and metal finishing: (1) paint stripping using plastic...

Preparing for Organisational Learning by HK Infrastructure Project Joint Ventures Organizations.

ERIC Educational Resources Information Center

Walker, Derek H. T.; Johannes, Derick S.

2003-01-01

Interviews with nine Hong Kong managers involved in joint ventures with other organizations focused on the organizational learning aspects of collaboration: attitudes toward interorganizational learning, acquisition of knowledge assets, and learning motivation. An important motivation for developing alliances was to learn from each other, fill…

76 FR 41287 - Incidental Take Permits and Joint Environmental Assessment for Four Single Family Residences in...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-13

... and occupation of four single-family residences (Projects). We invite public comments on these...] Incidental Take Permits and Joint Environmental Assessment for Four Single Family Residences in Escambia... September 12, 2011. ADDRESSES: Documents are available for public inspection by appointment during normal...

JPSS-1 Mission Science Briefing

NASA Image and Video Library

2017-11-12

JPSS-1 Mission Science Briefing hosted by Steve Cole, NASA Communications, with Mitch Goldberg, Chief Program Scientist, NOAA Joint Polar Satellite System, Joe Pica, Director, NOAA National Weather Service Office of Observations, James Gleason, Senior Project Scientist, NASA Joint Polar Satellite System, and Jana Luis, Division Chief, CAL FIRE Predictive Services.