Joint crisis plans and psychiatric advance directives in German psychiatric practice.

PubMed

Radenbach, Katrin; Falkai, Peter; Weber-Reich, Traudel; Simon, Alfred

2014-05-01

This study explores the attitude of German psychiatrists in leading positions towards joint crisis plans and psychiatric advance directives. This topic was examined by contacting 473 medical directors of German psychiatric hospitals and departments. They were asked to complete a questionnaire developed by us. That form contained questions about the incidence and acceptance of joint crisis plans and psychiatric advance directives and previous experiences with them. 108 medical directors of psychiatric hospitals and departments responded (response rate: 22.8%). Their answers demonstrate that in their hospitals these documents are rarely used. Among the respondents, joint crisis plans are more accepted than psychiatric advance directives. There is a certain uncertainty when dealing with these instruments. Our main conclusion is that German psychiatry needs an intensified discussion on the use of instruments for patients to constitute procedures for future critical psychiatric events. For this purpose it will be helpful to collect more empirical data. Furthermore, the proposal of joint crisis plans in psychiatric hospitals and departments should be discussed as well as the possibility of consulting an expert during the preparation of a psychiatric advance directive.

Improving Therapeutic Relationships: Joint Crisis Planning for Individuals With Psychotic Disorders.

PubMed

Farrelly, Simone; Lester, Helen; Rose, Diana; Birchwood, Max; Marshall, Max; Waheed, Waquas; Henderson, R Claire; Szmukler, George; Thornicroft, Graham

2015-12-01

Outcomes for individuals with psychosis remain far from acceptable. Recently, prominent psychiatrists have called for an improved understanding of the impact of social contexts, and how social contexts might influence the development and maintenance of mental health problems. A key social context for individuals with psychosis is the therapeutic relationship. As part of a trial of joint crisis planning in England, this qualitative study aimed to determine the mechanism through which joint crisis planning might affect the therapeutic relationship. Results suggest that routine processes in mental health care are affected by policy and organizational requirements for risk mitigation-aspects that undermine person-centered approaches. In contrast, strong therapeutic relationships are characterized by individualized care and reliable and respectful treatment. The Joint Crisis Plan intervention partially succeeded in reducing contextual influences on routine role enactments, facilitating the demonstration of respect and improving the therapeutic relationship. © The Author(s) 2015.

Joint Decision No. KEP-235/MEN 1985 and No. 114/MENKES/SKB/111/1985 and Joint Decision No. KEP-333/MEN/1985 and No. 15/MENKES/SKB/IV/1985, 1985.

PubMed

1988-01-01

Under these Joint Decisions, all industrial establishments employing 300 or more workers are obliged to establish an in-plant health clinic and to provide contraceptive services to eligible worker couples. Under Joint Decree No. KEP.12/MEN/1984 of the Ministry of Manpower, the Indonesian Labor Federation and the Indonesian Employers Association agreed to step up their family planning efforts in the industrial sector with the cooperation of the National Family Planning Coordinating Board. full text

Beyond Coordination: Joint Planning and Program Execution. The IHPRPT Materials Working Group

NASA Technical Reports Server (NTRS)

Stropki, Michael A.; Cleyrat, Danial A.; Clinton, Raymond G., Jr.; Rogacki, John R. (Technical Monitor)

2000-01-01

"Partnership is more than just coordination," stated then-Commander of the Air Force Research Laboratory (AFRL), Major General Dick Paul (USAF-Ret), at this year's National Space and Missile Materials Symposium. His comment referred to the example of the joint planning and program execution provided by the Integrated High Payoff Rocket Propulsion Technology (IHPRPT) Materials Working Group (IMWG). Most people agree that fiscal pressures imposed by shrinking budgets have made it extremely difficult to build upon our existing technical capabilities. In times of sufficient budgets, building advanced systems poses no major difficulties. However, with today's budgets, realizing enhanced capabilities and developing advanced systems often comes at an unaffordable cost. Overcoming this problem represents both a challenge and an opportunity to develop new business practices that allow us to develop advanced technologies within the restrictions imposed by current funding levels. Coordination of technology developments between different government agencies and organizations is a valuable tool for technology transfer. However, rarely do the newly developed technologies have direct applicability to other ongoing programs. Technology requirements are typically determined up-front during the program planning stage so that schedule risk can be minimized. The problem with this process is that the costs associated with the technology development are often borne by a single program. Additionally, the potential exists for duplication of technical effort. Changing this paradigm is a difficult process but one that can be extremely worthwhile should the right opportunity arise. The IMWG is one such example where NASA, the DoD, and industry have developed joint requirements that are intended to satisfy multiple program needs. More than mere coordination, the organizations comprising the group come together as partners, sharing information and resources, proceeding from a joint roadmap.

The Development of Action Planning in a Joint Action Context

ERIC Educational Resources Information Center

Paulus, Markus

2016-01-01

The ability to act jointly with another person is a fundamental requirement for participation in social life. The current study examines the development of action planning in a joint action context. In 4 experiments, 3-, 5-, and 7-year-old children as well as a group of adults (n = 196) interacted with another person to operate a novel apparatus.…

Joint ETV/NOWATECH test plan for the Sorbisense GSW40 passive sampler

EPA Science Inventory

The joint test plan is the implementation of a test design developed for verification of the performance of an environmental technology following the NOWATECH ETV method. The verification is a joint verification with the US EPA ETV scheme and the Advanced Monitoring Systems Cent...

78 FR 72932 - Joint Industry Plan; Notice of Filing and Immediate Effectiveness of Amendment No. 31 to the...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-04

... consolidated market data and anticipate that the Fee Changes will generate enough revenue to offset the revenue... ascertain from one data source the current prices in all the markets trading Nasdaq securities. The Plan... increases, rather than 30 days, is commonly used in the market data industry, in order to provide sufficient...

Joint operations planning for space surveillance missions on the MSX satellite

NASA Technical Reports Server (NTRS)

Stokes, Grant; Good, Andrew

1994-01-01

The Midcourse Space Experiment (MSX) satellite, sponsored by BMDO, is intended to gather broad-band phenomenology data on missiles, plumes, naturally occurring earthlimb backgrounds and deep space backgrounds. In addition the MSX will be used to conduct functional demonstrations of space-based space surveillance. The JHU/Applied Physics Laboratory (APL), located in Laurel, MD, is the integrator and operator of the MSX satellite. APL will conduct all operations related to the MSX and is charged with the detailed operations planning required to implement all of the experiments run on the MSX except the space surveillance experiments. The non-surveillance operations are generally amenable to being defined months ahead of time and being scheduled on a monthly basis. Lincoln Laboratory, Massachusetts Institute of Technology (LL), located in Lexington, MA, is the provider of one of the principle MSX instruments, the Space-Based Visible (SBV) sensor, and the agency charged with implementing the space surveillance demonstrations on the MSX. The planning timelines for the space surveillance demonstrations are fundamentally different from those for the other experiments. They are generally amenable to being scheduled on a monthly basis, but the specific experiment sequence and pointing must be refined shortly before execution. This allocation of responsibilities to different organizations implies the need for a joint mission planning system for conducting space surveillance demonstrations. This paper details the iterative, joint planning system, based on passing responsibility for generating MSX commands for surveillance operations from APL to LL for specific scheduled operations. The joint planning system, including the generation of a budget for spacecraft resources to be used for surveillance events, has been successfully demonstrated during ground testing of the MSX and is being validated for MSX launch within the year. The planning system developed for the MSX forms a

Joint Enabling Capabilities Command

Science.gov Websites

Executive Director Chief of Staff Joint Planning Support Element Joint Communications Support Element mission Joint Enabling Capabilities Command provides decisive joint communications, planning and public and responsive support for joint communications, planning and public affairs. Priorities * Deliver

Automated planning of MRI scans of knee joints

NASA Astrophysics Data System (ADS)

Bystrov, Daniel; Pekar, Vladimir; Young, Stewart; Dries, Sebastian P. M.; Heese, Harald S.; van Muiswinkel, Arianne M.

2007-03-01

A novel and robust method for automatic scan planning of MRI examinations of knee joints is presented. Clinical knee examinations require acquisition of a 'scout' image, in which the operator manually specifies the scan volume orientations (off-centres, angulations, field-of-view) for the subsequent diagnostic scans. This planning task is time-consuming and requires skilled operators. The proposed automated planning system determines orientations for the diagnostic scan by using a set of anatomical landmarks derived by adapting active shape models of the femur, patella and tibia to the acquired scout images. The expert knowledge required to position scan geometries is learned from previous manually planned scans, allowing individual preferences to be taken into account. The system is able to automatically discriminate between left and right knees. This allows to use and merge training data from both left and right knees, and to automatically transform all learned scan geometries to the side for which a plan is required, providing a convenient integration of the automated scan planning system in the clinical routine. Assessment of the method on the basis of 88 images from 31 different individuals, exhibiting strong anatomical and positional variability demonstrates success, robustness and efficiency of all parts of the proposed approach, which thus has the potential to significantly improve the clinical workflow.

Strategic Planning to Conduct Joint Force Network Operations: A Content Analysis of NETOPS Organizations Strategic Plans

DTIC Science & Technology

2007-03-01

information dominance , Joint Network Operations (NETOPS) organizations need to be strategically aligned. As result, to enhance the capabilities-based effects of NETOPS and reduce our NETOP infrastructures susceptibility to compromise. Once the key organizations were identified, their strategic plans were analyzed using a structured content analysis framework. The results illustrated that the strategic plans were aligned with the community of interests tasking to conduct NETOPS. Further research is required into the strategic alignment beyond the strategic

Enriching Planning through Industry Analysis

ERIC Educational Resources Information Center

Martinez, Mario; Wolverton, Mimi

2009-01-01

Strategic planning is an important tool, but the sole dependence on it across departments and campuses has resulted in the underutilization of equally important methods of analysis. The evolution of higher and postsecondary education necessitates a systemic industry analysis, as the combination of new providers and delivery mechanisms and changing…

PLANNING FOR SAFETY ON THE JOBSITE. SAFETY IN INDUSTRY--CONSTRUCTION INDUSTRY SERIES.

ERIC Educational Resources Information Center

OTTO, FRANCIS L.; VAN ATTA, F.A.

WORK INJURIES AND THEIR MONETARY LOSSES IN THE CONSTRUCTION INDUSTRY CAN BE EFFECTIVELY PREVENTED ONLY THROUGH AN AGGRESSIVE AND WELL-PLANNED SAFETY EFFORT. THIS BULLETIN DISCUSSES THE "HOW" OF PLANNING FOR SAFETY ON THE JOBSITE. IT WAS PREPARED IN THE DIVISION OF PROGRAMING AND RESEARCH, OFFICE OF OCCUPATIONAL SAFETY. CONTENTS INCLUDE (1) THE…

L'espace articulaire de la Robotique Industrielle est un espace vectorielIndustrial Robotics joint space is a vector space

NASA Astrophysics Data System (ADS)

Tondu, Bertrand

2003-05-01

The mathematical modelling of industrial robots is based on the vectorial nature of the n-dimensional joint space of the robot, defined as a kinematic chain with n degrees of freedom. However, in our opinion, the vectorial nature of the joint space has been insufficiently discussed in the literature. We establish the vectorial nature of the joint space of an industrial robot from the fundamental studies of B. Roth on screws. To cite this article: B. Tondu, C. R. Mecanique 331 (2003).

Human Resource Planning: Challenges for Industrial/Organizational Psychologists.

ERIC Educational Resources Information Center

Jackson, Susan E.; Schuler, Randall S.

1990-01-01

Describes activities that industrial/organizational psychologists engage in as they seek to improve the competitiveness of organizations through effective human resource planning. Presents a model for describing human resource short-term, intermediate-term, and long-term planning. (JS)

Integrating strategic environmental assessment with industry planning: a case study of the Pasquai-Porcupine forest management plan, Saskatchewan, Canada.

PubMed

Noble, Bram F

2004-03-01

Strategic environmental assessment (SEA) is gaining widespread recognition as a tool for integrating environmental considerations in policy, plan, and program development and decision-making. Notwithstanding the potential of SEA to improve higher-order decision processes, there has been very little attention given to integrating SEA with industry planning practices. As a result, the benefits of SEA have yet to be fully realized among industrial proponents. That said, SEA practice is ongoing, albeit informally and often under a different label, and is proving to be a valuable tool for industry planning and decision-making. Based on a case study of the Pasquai-Porcupine forest management plan in Saskatchewan, Canada, this paper illustrates how an integrated approach to SEA can contribute to industry environmental decision-making and can enhance the quality and deliverability of industry plans.

National Rocket Propulsion Materials Plan: A NASA, Department of Defense, and Industry Partnership

NASA Technical Reports Server (NTRS)

Clinton, Raymond G., Jr.; Munafo, Paul M. (Technical Monitor)

2001-01-01

NASA, Department of Defense, and rocket propulsion industry representatives are working together to create a national rocket propulsion materials development roadmap. This "living document" will facilitate collaboration among the partners, leveraging of resources, and will be a highly effective tool for technology development planning. The structuring of the roadmap, and development plan, which will combine the significant efforts of the Integrated High Payoff Rocket Propulsion Technology (IHPRPT) Program, and NASA's Integrated Space Transportation Plan (ISTP), is being lead by the IHPRPT Materials Working Group (IMWG). The IHPRPT Program is a joint DoD, NASA, and industry effort to dramatically improve the nation's rocket propulsion capabilities. This phased program is structured with increasingly challenging goals focused on performance, reliability, and cost to effectively double rocket propulsion capabilities by 2010. The IHPRPT program is focused on three propulsion application areas: Boost and Orbit Transfer (both liquid rocket engines and solid rocket motors), Tactical, and Spacecraft. Critical to the success of this initiative is the development and application of advanced materials, processes, and manufacturing technologies. NASA's ISTP is a comprehensive strategy focusing on the aggressive safety, reliability, and affordability goals for future space transportation systems established by the agency. Key elements of this plan are the 2 nd and 3 d Generation Reusable Launch Vehicles (RLV). The affordability and safety goals of these generational systems are, respectively, 10X cheaper and 100X safer by 2010, and 100X cheaper and 10,000X safer by 2025. Accomplishment of these goals requires dramatic and sustained breakthroughs, particularly in the development and the application of advanced material systems. The presentation will provide an overview of the IHPRPT materials initiatives, NASA's 2nd and 3 rd Generation RLV propulsion materials projects, and the

19 CFR 206.16 - Industry adjustment plan and commitments.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 3 2014-04-01 2014-04-01 false Industry adjustment plan and commitments. 206.16... OF RELIEF ACTIONS Investigations Relating to Global Safeguard Actions § 206.16 Industry adjustment... determination, any firm in the domestic industry, certified or recognized union or group of workers in the...

19 CFR 206.16 - Industry adjustment plan and commitments.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 3 2013-04-01 2013-04-01 false Industry adjustment plan and commitments. 206.16... OF RELIEF ACTIONS Investigations Relating to Global Safeguard Actions § 206.16 Industry adjustment... determination, any firm in the domestic industry, certified or recognized union or group of workers in the...

19 CFR 206.16 - Industry adjustment plan and commitments.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 3 2012-04-01 2012-04-01 false Industry adjustment plan and commitments. 206.16... OF RELIEF ACTIONS Investigations Relating to Global Safeguard Actions § 206.16 Industry adjustment... determination, any firm in the domestic industry, certified or recognized union or group of workers in the...

19 CFR 206.16 - Industry adjustment plan and commitments.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 3 2011-04-01 2011-04-01 false Industry adjustment plan and commitments. 206.16... OF RELIEF ACTIONS Investigations Relating to Global Safeguard Actions § 206.16 Industry adjustment... determination, any firm in the domestic industry, certified or recognized union or group of workers in the...

75 FR 27010 - Joint Industry Plan; Notice of Filing of Amendment No. 21 to the Joint Self-Regulatory...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-13

... processor to create and make available depth-of-book displays; the incorporation into the Plan of the... Elizabeth Murphy, Secretary, Commission, dated February 26, 2010. \\6\\ The complete text of the Plan, as... to submit its projected capacity needs directly to the Plan's Processor. The process avoids any need...

Joint implementation: Biodiversity and greenhouse gas offsets

NASA Astrophysics Data System (ADS)

Cutright, Noel J.

1996-11-01

One of the most pressing environmental issues today is the possibility that projected increases in global emissions of greenhouse gases from increased deforestation, development, and fossil-fuel combustion could significantly alter global climate patterns. Under the terms of the United Nations Framework Convention on Climate Change, signed in Rio de Janeiro during the June 1992 Earth Summit, the United States and other industrialized countries committed to balancing greenhouse gas emissions at 1990 levels in the year 2000. Included in the treaty is a provision titled “Joint Implementation,” whereby industrialized countries assist developing countries in jointly modifying long-term emission trends, either through emission reductions or by protecting and enhancing greenhouse gas sinks (carbon sequestration). The US Climate Action Plan, signed by President Clinton in 1993, calls for voluntary climate change mitigation measures by various sectors, and the action plan included a new program, the US Initiative on Joint Implementation. Wisconsin Electric decided to invest in a Jl project because its concept encourages creative, cost-effective solutions to environmental problems through partnering, international cooperation, and innovation. The project chosen, a forest preservation and management effort in Belize, will sequester more than five million tons of carbon dioxide over a 40-year period, will become economically selfsustaining after ten years, and will have substantial biodiversity benefits.

Water and wastewater minimization plan in food industries.

PubMed

Ganjidoust, H; Ayati, B

2002-01-01

Iran is one of the countries located in a dry and semi-dry area. Many provinces like Tehran are facing problems in recent years because of less precipitation. For reduction in wastewater treatment cost and water consumption, many research works have been carried out. One of them concerns food industries group, which consumes a great amount of water in different units. For example, in beverage industries, washing of glass bottles seven times requires large amounts of water but use of plastic bottles can reduce water consumption. Another problem is leakage from pipelines, valves, etc. Their repair plays an important role in the wastage of water. The non-polluted wasted water can be used in washing halls, watering green yards, recycling to the process or reusing in cooling towers. In this paper, after a short review of waste minimization plans in food industries, problems concerning water consuming and wastewater producing units in three Iranian food industries have been investigated. At the end, some suggestions have been given for implementing the water and wastewater minimization plan in the companies.

ONR Tidal Flats DRI: Planning Joint Modeling and Field Exercises

DTIC Science & Technology

2007-01-01

ONR Tidal Flats DRI: Planning Joint Modeling and Field Exercises Lyle Hibler Battelle/Marine Research Operations 1529 West Sequim Bay Road...West Sequim Bay Road Sequim , WA 98382 Phone: (360) 681-4591 Fax: (360) 681-4598 Email: adam.maxwell@pnl.gov Award Number: N000140710694...PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Battelle/Marine Research Operations,1529 West Sequim Bay Road, Sequim ,WA,98382 8. PERFORMING ORGANIZATION

Implications of the Joint Comprehensive Plan of Action

NASA Astrophysics Data System (ADS)

Perkovich, George

2017-11-01

This essay describes the background behind the July 2015 Joint Comprehensive Plan of Action that was negotiated to redress the crisis that had developed around Iran's nuclear activities, and summarizes some of the agreement's key features. The essay then highlights political and strategic factors that enabled the diplomatic breakthrough, and draws lessons that could inform approaches to future proliferation challenges. The conclusion suggests how some of the agreement's innovative features could be built upon and applied more broadly to reduce risks that civilian nuclear energy programs could be diverted for military purposes and to inform approaches to nuclear disarmament in the future.

75 FR 56651 - ITS Joint Program Office; Trucking Industry Mobility & Technology Coalition Annual Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-16

...: Beating Gridlock with a Smart Grid; U.S. DOT Truck Technology Initiatives; and State and Federal... DEPARTMENT OF TRANSPORTATION ITS Joint Program Office; Trucking Industry Mobility & Technology Coalition Annual Meeting AGENCY: Research and Innovative Technology Administration, U.S. Department of...

TOPEX/POSEIDON joint verification plan

NASA Technical Reports Server (NTRS)

1992-01-01

TOPEX/POSEIDON is a satellite mission that will use altimetry to make precise measurements of sea level with the primary goal of studying global ocean circulation. The mission is jointly conducted by the United States' National Aeronautics and Space Administration (NASA) and the French space agency, Centre National d'Etudes Spatiales (CNES). The current plans call for a launch of the satellite in August 1992. The primary mission will last 3 years, and provisions were made to extend the mission for an additional 2 years. The mission was coordinated with a number of international oceanographic and meteorological programs, including the World Ocean Circulation Experiment and the Tropical Ocean and Global Atmosphere Program, both of which are sponsored by the World Climate Research Program. The observations of TOPEX/POSEIDON are timed to provide a global perspective for interpreting the in situ measurements collected by these programs and in turn will be combined with observations of other satellites to achieve a global, four-dimensional description of the circulation of the world's oceans. In the autumn of 1987, an international team of 38 Principal Investigators was selected to participate in the mission. These scientists have been working closely with the TOPEX/POSEIDON Project to refine the mission design and science plans. During the first 6 months after launch, a number of these investigators will join with the project to conduct a wide range of oceanographic and geophysical investigations using the TOPEX/POSEIDON data. The purpose of these investigations is to demonstrate the scientific utility of the mission to the international scientific community.

Industrial robot

NASA Astrophysics Data System (ADS)

Prakashan, A.; Mukunda, H. S.; Samuel, S. D.; Colaco, J. C.

1992-11-01

This paper addresses the design and development of a four degree of freedom industrial manipulator, with three liner axes in the positioning mechanism and one rotary axis in the orientation mechanism. The positioning mechanism joints are driven with dc servo motors fitted with incremental shaft encoders. The rotary joint of the orientation mechanism is driven by a stepping motor. The manipulator is controlled by an IBM 386 PC/AT. Microcomputer based interface cards have been developed for independent joint control. PID controllers for dc motors have been designed. Kinematic modeling, dynamic modeling, and path planning have been carried out to generate the control sequence to accomplish a given task with reference to source and destination state constraints. This project has been sponsored by the Department of Science and Technology, Government of India, New Delhi, and has been executed in collaboration with M/s Larsen & Toubro Ltd, Mysore, India.

Personal Study Planning in Doctoral Education in Industrial Engineering

ERIC Educational Resources Information Center

Lahenius, K.; Martinsuo, M.

2010-01-01

The duration of doctoral studies has increased in Europe. Personal study planning has been considered as one possible solution to help students in achieving shorter study times. This study investigates how doctoral students experience and use personal study plans in one university department of industrial engineering. The research material…

Texas Quality Workforce Planning: 1993 Key Industries and Targeted Occupations for Texas' 24 Quality Work Force Planning Regions.

ERIC Educational Resources Information Center

Texas State Dept. of Commerce, Austin.

In 1993, Texas' 24 quality work force planning committees used a state-developed targeted occupations planning methodology to identify key industries and targeted occupations with the greatest potential for job openings in their respective regions. Between 11 and 20 key industries (13.5 on average) were identified for each region. The following 10…

Electricity-Electronics for Industrial Arts. Instructors Lesson Plans. Industrial Arts Series, Publication Number 10,010.

ERIC Educational Resources Information Center

Hinrichs, Roy S., Comp.

Thirty-one lesson plans on electricity-electronics are presented in this guide designed for industrial arts instructors. Each lesson plan is organized into the following format: (1) lesson objective; (2) supplementary teaching items; (3) presentation; (4) demonstration; (5) laboratory or other activities; and (6) test items (oral, written, or…

Lower limb joint kinetics in walking: the role of industry recommended footwear.

PubMed

Keenan, Geoffrey S; Franz, Jason R; Dicharry, Jay; Della Croce, Ugo; Kerrigan, D Casey

2011-03-01

The effects of current athletic footwear on lower extremity biomechanics are unknown. The aim of this study was to examine the changes, if any, that occur in peak lower extremity net joint moments while walking in industry recommended athletic footwear. Sixty-eight healthy young adults underwent kinetic evaluation of lower extremity extrinsic joint moments while walking barefoot and while walking in current standard athletic footwear matched to the foot mechanics of each subject while controlling for speed. A secondary analysis was performed comparing peak knee joint extrinsic moments during barefoot walking to those while walking in three different standard footwear types: stability, motion control, and cushion. 3-D motion capture data were collected in synchrony with ground reaction force data collected from an instrumented treadmill. The shod condition was associated with a 9.7% increase in the first peak knee varus moment, and increases in the hip flexion and extension moments. These increases may be largely related to a 6.5% increase in stride length with shoes associated with increases in the ground reaction forces in all three axes. The changes from barefoot walking observed in the peak knee joint moments were similar when subjects walked in all three footwear types. It is unclear to what extent these increased joint moments may be clinically relevant, or potentially adverse. Nonetheless, these differences should be considered in the recommendation as well as the design of footwear in the future. Copyright © 2010 Elsevier B.V. All rights reserved.

The Joint Agency Commercial Imagery Evaluation (JACIE) Team: Overview and IKONOS Joint Characterization Approach

NASA Technical Reports Server (NTRS)

Zanoni, Vicki; Ryan, Robert; Pagnutti, Mary; Baldridge, Braxton; Roylance, Spencer; Snyder, Greg; Lee, George; Stanley, Tom

2002-01-01

An overview of the Joint Agency Commercial Imagery Evalation (JACIE) team is presented. JACIE, composed of the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA), and the U.S. Geological Survey (USGS), was formed to leverage government agencies' capabilities for the characterization of commercial remote sensing data. Each JACIE agency purchases, or plans to purchase, commercial imagery to support its research and applications. It is critical that the data be assessed for its accuracy and utility. Through JACIE, NASA, NIMA, and USGS jointly characterized image products from Space Imaging's IKONOS satellite. Each JACIE agency performed an aspect of the characterization based on its expertise. NASA and its university partners performed a system characterization focusing on radiometric calibration, geopositional accuracy, and spatial resolution assessment; NIMA performed image interpretability and feature extraction evaluations; and USGS assessed geopositional accuracy of several IKONOS products. The JACIE team purchased IKONOS imagery of several study sites to perform the assessments and presented results at an industry-government workshop. Future plans for JACIE include the characterization of DigitalGlobe's QuickBird-2 image products.

Transcript of the Joint FAA/Industry Symposium on Level B Airplane simulator aeromodel validation requirements

DOT National Transportation Integrated Search

1996-03-13

"This is the transcript of the Joint FAA/Industry Symposium on Level B Airplane Simulator Aeromodel Validation Requirements held on March 13-14, 1996, at the Washington Dulles Airport Hilton. The purpose of the meeting was to discuss the aeromodeling...

Elementary School Industrial Arts. ESIA Lesson Plans and Resources for Elementary Classroom Teachers and Industrial Arts Consultants.

ERIC Educational Resources Information Center

Lucy, John H.; And Others

This handbook contains 17 teacher-developed elementary school industrial arts (ESIA) lesson plans and a bibliography of resources to assist in planning additional lessons. The handbook supplements an ESIA curriculum guide used in Pennsylvania. Each plan contains the name of the activity, its purpose, a drawing or photograph of the product, a work…

Prototype integration of the joint munitions assessment and planning model with the OSD threat methodology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lynn, R.Y.S.; Bolmarcich, J.J.

The purpose of this Memorandum is to propose a prototype procedure which the Office of Munitions might employ to exercise, in a supportive joint fashion, two of its High Level Conventional Munitions Models, namely, the OSD Threat Methodology and the Joint Munitions Assessment and Planning (JMAP) model. The joint application of JMAP and the OSD Threat Methodology provides a tool to optimize munitions stockpiles. The remainder of this Memorandum comprises five parts. The first is a description of the structure and use of the OSD Threat Methodology. The second is a description of JMAP and its use. The third discussesmore » the concept of the joint application of JMAP and OSD Threat Methodology. The fourth displays sample output of the joint application. The fifth is a summary and epilogue. Finally, three appendices contain details of the formulation, data, and computer code.« less

Planning for Safety on the Jobsite. Safety in Industry, Construction Industry Series.

ERIC Educational Resources Information Center

Occupational Safety and Health Administration, Washington, DC.

Work injuries and their monetary losses in the construction industry can be effectively prevented only through an aggressive and well-planned safety effort. The purpose of this bulletin is to provide guidelines to aid the construction contractor in complying with legal requirements and in attaining the objective of keeping costly accidents and…

78 FR 15757 - Joint Industry Plan; Notice of Filing of the Third Amendment to the National Market System Plan...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-12

...; Notice of Filing of the Third Amendment to the National Market System Plan to Address Extraordinary... following parties to the National Market System Plan: BATS Exchange, Inc., BATS Y- Exchange, Inc., Chicago... preparing, filing, and implementing national market system plans. I. Definitions (A) ``Eligible Reported...

Workforce Planning for the Community Services and Health Industry. Occasional Paper

ERIC Educational Resources Information Center

Karmel, Tom; Blomberg, Davinia

2009-01-01

This paper aims to provide a picture of the occupations in the community services and health industry, and how the workforce obtains the required skills. The authors argue that planning for the industry should concentrate on occupations specific to the industry and those which require high skill levels. Findings suggest that the qualification…

Counterinsurgency and Operational Art: Is the Joint Campaign Planning Model Adequate?

DTIC Science & Technology

2003-01-01

ART: IS THE JOINT CAMAPIGN PLANNING MODEL ADEQUATE? by MAJ Thomas Erik Miller, USA, 90 pages. The United States has conducted or supported more than a...increase. Some of the effects of the fall of the Soviet Union were a loosening of internal and external political and social controls in formerly Soviet...order” in the social , economic and political arena through rapid growth in population and urbanization in the underdeveloped world, globalization and

Status of joint US/USSR experiments planned for the Cosmos '83 biosatellite mission

NASA Technical Reports Server (NTRS)

Souza, K. A.

1982-01-01

The plans and status of the fourth joint US/USSR biosatellite experiment, scheduled to be conducted in the last half of 1983, are discussed. These experiments will be conducted on board an unmanned Soviet spacecraft and will involve two restrained Rhesus monkeys and 10 pregnant rats, as well as a variety of small plant and radiation biology experiments. Three of the joint studies will use the monkeys for studies of biorhythms, calcium homeostasis, and the cardiovascular system. The fourth experiment will study rodent embryogenesis and neonatal behavior and development following in utero exposure to spaceflight. Specialized sensors and battery powered hardware have been designed, fabricated, and qualified for flight.

78 FR 21483 - Joint Industry Plan; Order Approving the Third Amendment to the National Market System Plan to...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-10

... the Securities Information Processors (``SIPs'' or ``Processors'') responsible for consolidation of... Plan. \\9\\ 17 CFR 242.603(b). The Plan refers to this entity as the Processor. \\10\\ See Section I(T) of... Euronext, to Elizabeth M. Murphy, Secretary, Commission, dated May 24, 2012. The Processors would also...

Informed, advance refusals of treatment by people with severe mental illness in a randomised controlled trial of joint crisis plans: demand, content and correlates.

PubMed

Henderson, Claire; Farrelly, Simone; Flach, Clare; Borschmann, Rohan; Birchwood, Max; Thornicroft, Graham; Waheed, Waquas; Szmukler, George

2017-11-24

In the UK, crisis planning for mental health care should acknowledge the right to make an informed advance treatment refusal under the Mental Capacity Act 2005. Our aims were to estimate the demand for such treatment refusals within a sample of service users who had had a recent hospital admission for psychosis or bipolar disorder, and to examine the relationship between refusals, and service user characteristics. To identify refusals we conducted content analysis of Joint Crisis Plans, which are plans formulated by service users and their clinical team with involvement from an external facilitator, and routine care plans in sub-samples from a multi-centre randomised controlled trial of Joint Crisis Plans (plus routine mental health care) versus routine care alone (CRIMSON) in England. Factors hypothesised to be associated with refusals were identified using the trial data collected through baseline interviews of service users and clinicians and collection of routine clinical data. Ninety-nine of 221 (45%) of the Joint Crisis Plans contained a treatment refusal compared to 10 of 424 (2.4%) baseline routine care plans. No Joint Crisis Plans recorded disagreement with refusals on the part of clinicians. Among those with completed Joint Crisis Plans, adjusted analyses indicated a significant association between treatment refusals and perceived coercion at baseline (odds ratio = 1.21, 95% CI 1.02-1.43), but not with baseline working alliance or a past history of involuntary admission. We demonstrated significant demand for written treatment refusals in line with the Mental Capacity Act 2005, which had not previously been elicited by the process of treatment planning. Future treatment/crisis plans should incorporate the opportunity for service users to record a treatment refusal during the drafting of such plans. ISRCTN11501328 Registered 13th March 2008.

Fluid flow analysis of E-glass fiber reinforced pipe joints in oil and gas industry

NASA Astrophysics Data System (ADS)

Bobba, Sujith; Leman, Z.; Zainuddin, E. S.; Sapuan, S. M.

2018-04-01

Glass Fiber reinforced composites have become increasingly important over the past few years and now they are the first choice materials for fabricating pipes with low weight in combination with high strength and stiffness. In Oil And Gas Industry, The Pipelines transporting heavy crude oil are subjected to variable pressure waves causing fluctuating stress levels in the pipes. Computational Fluid Dynamics (CFD) analysis was performed using solid works flow stimulation software to study the effects of these pressure waves on some specified joints in the pipes. Depending on the type of heavy crude oil being used, the flow behavior indicated a considerable degree of stress levels in certain connecting joints, causing the joints to become weak over a prolonged period of use. This research proposes a new perspective that is still required to be developed regarding the change of the pipe material, fiber winding angle in those specified joints and finally implementing cad wind technology to check the output result of the stress levels so that the life of the pipes can be optimized.

Coordination and Human Resource Planning in the Hawaii Visitor Industry.

ERIC Educational Resources Information Center

Hawaii State Commission on Manpower and Full Employment, Honolulu.

This report was undertaken in response to a request by the Sixth Legislature, which expressed its concern with the lack of coordination and overall human resource planning in the visitor industry and that the findings of the January 6-7, 1970 Travel Industry Congress had not been fully implemented. The State Commission on Manpower and Full…

Integrating energy and environmental management in wood furniture industry.

PubMed

Gordić, Dušan; Babić, Milun; Jelić, Dubravka; Konćalović, Davor; Vukašinović, Vladimir

2014-01-01

As energy costs continue to rise, industrial plants (even those of energy nonintensive industries such as furniture industry) need effective way to reduce the amount of energy they consume. Besides, there are a number of economic and environmental reasons why a company should consider environmental management initiatives. This paper provides a detailed guideline for implementing joint energy and environmental management system in wood furniture industrial company. It covers in detail all essential aspects of the system: initial system assessment, organization, policy development, energy and environmental auditing, action plan development, system promotion, checking system performance, and management review.

Integrating Energy and Environmental Management in Wood Furniture Industry

PubMed Central

Babić, Milun; Jelić, Dubravka; Konćalović, Davor; Vukašinović, Vladimir

2014-01-01

As energy costs continue to rise, industrial plants (even those of energy nonintensive industries such as furniture industry) need effective way to reduce the amount of energy they consume. Besides, there are a number of economic and environmental reasons why a company should consider environmental management initiatives. This paper provides a detailed guideline for implementing joint energy and environmental management system in wood furniture industrial company. It covers in detail all essential aspects of the system: initial system assessment, organization, policy development, energy and environmental auditing, action plan development, system promotion, checking system performance, and management review. PMID:24587734

Joint crisis plans for people with borderline personality disorder: feasibility and outcomes in a randomised controlled trial.

PubMed

Borschmann, Rohan; Barrett, Barbara; Hellier, Jennifer M; Byford, Sarah; Henderson, Claire; Rose, Diana; Slade, Mike; Sutherby, Kim; Szmukler, George; Thornicroft, Graham; Hogg, Joanna; Moran, Paul

2013-05-01

People with borderline personality disorder frequently experience crises. To date, no randomised controlled trials (RCTs) of crisis interventions for this population have been published. To examine the feasibility of recruiting and retaining adults with borderline personality disorder to a pilot RCT investigating the potential efficacy and cost-effectiveness of using a joint crisis plan. An RCT of joint crisis plans for community-dwelling adults with borderline personality disorder (trial registration: ISRCTN12440268). The primary outcome measure was the occurrence of self-harming behaviour over the 6-month period following randomisation. Secondary outcomes included depression, anxiety, engagement and satisfaction with services, quality of life, well-being and cost-effectiveness. In total, 88 adults out of the 133 referred were eligible and were randomised to receive a joint crisis plan in addition to treatment as usual (TAU; n = 46) or TAU alone (n = 42). This represented approximately 75% of our target sample size and follow-up data were collected on 73 (83.0%) participants. Intention-to-treat analysis revealed no significant differences in the proportion of participants who reported self-harming (odds ratio (OR) = 1.9, 95% CI 0.53-6.5, P = 0.33) or the frequency of self-harming behaviour (rate ratio (RR) = 0.74, 95% CI 0.34-1.63, P = 0.46) between the two groups at follow-up. No significant differences were observed between the two groups on any of the secondary outcome measures or costs. It is feasible to recruit and retain people with borderline personality disorder to a trial of joint crisis plans and the intervention appears to have high face validity with this population. However, we found no evidence of clinical efficacy in this feasibility study.

The Importance of Human Resource Planning in Industrial Enterprises

NASA Astrophysics Data System (ADS)

Koltnerová, Kristína; Chlpeková, Andrea; Samáková, Jana

2012-12-01

Human resource planning in the business practice should represent generally used and key activity for human resource management because human resource planning helps to make optimum utilisation of the human resources in the enterprise and it helps to avoid wastage of human resources. Human resource planning allows to forecast the future manpower requirements and also to forecast the number and type of employees who will be required by the enterprise in a near future. In the long term period, success of any enterprise depends on whether the right people are in the right places at the right time, which is the nature of human resource planning. The aim of this contribution is to explain the importance of human resource planning and to outline results of questionnaire survey which it was realized in industrial enterprises.

76 FR 55923 - Draft Guidance for Industry: Submission of Warning Plans for Cigarettes and Smokeless Tobacco...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-09

...] Draft Guidance for Industry: Submission of Warning Plans for Cigarettes and Smokeless Tobacco Products... the availability of a draft guidance for industry entitled ``Submission of Warning Plans for... submitting warning plans to FDA under the Comprehensive Smokeless Tobacco Health Education Act, as amended by...

78 FR 42085 - Draft Guidance for Industry on Pediatric Study Plans: Content of and Process for Submitting...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-15

...] Draft Guidance for Industry on Pediatric Study Plans: Content of and Process for Submitting Initial... a draft guidance for industry entitled ``Pediatric Study Plans: Content of and Process for... Plans: Content of and Process for Submitting Initial Pediatric Study Plans and Amended Pediatric Study...

Talking about Money Is Taboo: Perceptions of Financial Planning Students and Implications for the Financial Planning Industry

ERIC Educational Resources Information Center

Alsemgeest, Liezel

2016-01-01

Communication about money is a social, cultural and psychological taboo and yet it is essential in the financial planning industry, as a financial planner cannot be effective if all information is not disclosed. This article examines how financial planning students perceive communication about money, their willingness to talk about it and their…

Joint Planning Of Energy Storage and Transmission Considering Wind-Storage Combined System and Demand Side Response

NASA Astrophysics Data System (ADS)

Huang, Y.; Liu, B. Z.; Wang, K. Y.; Ai, X.

2017-12-01

In response to the new requirements of the operation mode of wind-storage combined system and demand side response for transmission network planning, this paper presents a joint planning of energy storage and transmission considering wind-storage combined system and demand side response. Firstly, the charge-discharge strategy of energy storage system equipped at the outlet of wind farm and demand side response strategy are analysed to achieve the best comprehensive benefits through the coordination of the two. Secondly, in the general transmission network planning model with wind power, both energy storage cost and demand side response cost are added to the objective function. Not only energy storage operation constraints and but also demand side response constraints are introduced into the constraint condition. Based on the classical formulation of TEP, a new formulation is developed considering the simultaneous addition of the charge-discharge strategy of energy storage system equipped at the outlet of the wind farm and demand side response strategy, which belongs to a typical mixed integer linear programming model that can be solved by mature optimization software. The case study based on the Garver-6 bus system shows that the validity of the proposed model is verified by comparison with general transmission network planning model. Furthermore, the results demonstrate that the joint planning model can gain more economic benefits through setting up different cases.

Bio-based Industries Joint Undertaking: The catalyst for sustainable bio-based economic growth in Europe.

PubMed

Mengal, Philippe; Wubbolts, Marcel; Zika, Eleni; Ruiz, Ana; Brigitta, Dieter; Pieniadz, Agata; Black, Sarah

2018-01-25

This article discusses the preparation, structure and objectives of the Bio-based Industries Joint Undertaking (BBI JU). BBI JU is a public-private partnership (PPP) between the European Commission (EC) and the Bio-based Industries Consortium (BIC), the industry-led private not-for-profit organisation representing the private sectors across the bio-based industries. The model of the public-private partnership has been successful as a new approach to supporting research and innovation and de-risking investment in Europe. The BBI JU became a reality in 2014 and represents the largest industrial and economic cooperation endeavour financially ever undertaken in Europe in the area of industrial biotechnologies. It is considered to be one of the most forward-looking initiatives under Horizon 2020 and demonstrates the circular economy in action. The BBI JU will be the catalyst for this strategy to mobilise actors across Europe including large industry, small and medium-sized enterprises (SMEs), all types of research organisations, networks and universities. It will support regions and in doing so, the European Union Member States and associated countries in the implementation of their bioeconomy strategies. Copyright © 2017 Elsevier B.V. All rights reserved.

19 CFR 206.16 - Industry adjustment plan and commitments.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Industry adjustment plan and commitments. 206.16 Section 206.16 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS RELATING TO GLOBAL AND BILATERAL SAFEGUARD ACTIONS, MARKET DISRUPTION, TRADE DIVERSION, AND REVIEW...

Needs Assessment for the Construction Industry in B.C. & the Yukon. Skill Plan.

ERIC Educational Resources Information Center

Lewe, Glenda

A basic skills needs assessment developed a picture of the basic skills levels and needs of the construction industry in British Columbia and the Yukon. The three parts of the assessment were interviews with business managers and managers of other programs provided through joint labor/management initiatives, a questionnaire administered to…

Race-Neutral Campuses in Urban Areas: A Follow-Up Report on Merger and Joint Planning.

ERIC Educational Resources Information Center

Godard, James M.

Developments during the 1980-81 academic year concerning mergers/joint planning projects designed to eliminate unnecessary duplication of programs between historically black and white colleges in Nashville, Tennessee; Savannah, Georgia; and Norfolk, Virginia are examined. Site visits were made during the second year of operation of the programs at…

Progressive Era Industry and Its Legacy: Essays and Lesson Plans for Teaching Industrial History of the Progressive Era.

ERIC Educational Resources Information Center

Murray, William J., Ed.

The Progressive Era, roughly the period between the Spanish American War and the U.S. entry into World War I, was a period of transformation, a time when the United States ceased being predominantly an agricultural economy with a minor industrial base and became predominantly a modern industrialized nation. These essays and lesson plans, the…

77 FR 71008 - Guidance for Industry: Enforcement Policy Concerning Rotational Warning Plans for Smokeless...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-28

...] Guidance for Industry: Enforcement Policy Concerning Rotational Warning Plans for Smokeless Tobacco... ``Enforcement Policy Concerning Rotational Warning Plans for Smokeless Tobacco Products,'' that was announced in... Concerning Rotational Warning Plans for Smokeless Tobacco Products.'' This guidance provided information to...

Emergency planning and preparedness for the deliberate release of toxic industrial chemicals.

PubMed

Russell, David; Simpson, John

2010-03-01

Society in developed and developing countries is hugely dependent upon chemicals for health, wealth, and economic prosperity, with the chemical industry contributing significantly to the global economy. Many chemicals are synthesized, stored, and transported in vast quantities and classified as high production volume chemicals; some are recognized as being toxic industrial chemicals (TICs). Chemical accidents involving chemical installations and transportation are well recognized. Such chemical accidents occur with relative frequency and may result in large numbers of casualties with acute and chronic health effects as well as fatalities. The large-scale production of TICs, the potential for widespread exposure and significant public health impact, together with their relative ease of acquisition, makes deliberate release an area of potential concern. The large numbers of chemicals, together with the large number of potential release scenarios means that the number of possible forms of chemical incident are almost infinite. Therefore, prior to undertaking emergency planning and preparedness, it is necessary to prioritize risk and subsequently mitigate. This is a multi-faceted process, including implementation of industrial protection layers, substitution of hazardous chemicals, and relocation away from communities. Residual risk provides the basis for subsequent planning. Risk-prioritized emergency planning is a tool for identifying gaps, enhancing communication and collaboration, and for policy development. It also serves to enhance preparedness, a necessary prelude to preventing or mitigating the public health risk to deliberate release. Planning is an iterative and on-going process that requires multi-disciplinary agency input, culminating in the formation of a chemical incident plan complimentary to major incident planning. Preparedness is closely related and reflects a state of readiness. It is comprised of several components, including training and exercising

A Quantitative Exposure Planning Tool for Surgical Approaches to the Sacroiliac Joint.

PubMed

Phelps, Kevin D; Ming, Bryan W; Fox, Wade E; Bellamy, Nelly; Sims, Stephen H; Karunakar, Madhav A; Hsu, Joseph R

2016-06-01

To aid in surgical planning by quantifying and comparing the osseous exposure between the anterior and posterior approaches to the sacroiliac joint. Anterior and posterior approaches were performed on 12 sacroiliac joints in 6 fresh-frozen torsos. Visual and palpable access to relevant surgical landmarks was recorded. Calibrated digital photographs were taken of each approach and analyzed using Image J. The average surface areas of exposed bone were 44 and 33 cm for the anterior and posterior approaches, respectively. The anterior iliolumbar ligament footprint could be visualized in all anterior approaches, whereas the posterior aspect could be visualized in all but one posterior approach. The anterior approach provided visual and palpable access to the anterior superior edge of the sacroiliac joint in all specimens, the posterior superior edge in 75% of specimens, and the inferior margin in 25% and 50% of specimens, respectively. The inferior sacroiliac joint was easily visualized and palpated in all posterior approaches, although access to the anterior and posterior superior edges was more limited. The anterior S1 neuroforamen was not visualized with either approach and was more consistently palpated when going posterior (33% vs. 92%). Both anterior and posterior approaches can be used for open reduction of pure sacroiliac dislocations, each with specific areas for assessing reduction. In light of current plate dimensions, fractures more than 2.5 cm lateral to the anterior iliolumbar ligament footprint are amenable to anterior plate fixation, whereas those more medial may be better addressed through a posterior approach.

Searching for Order Within Chaos: Complexity Theorys Implications to Intelligence Support During Joint Operational Planning

DTIC Science & Technology

2017-06-09

structures constantly arise in firefights and skirmishes on the battlefield. Source: Andrew Ilachinski, Artificial War: Multiagent- Based Simulation of...Alternative Methods of Analysis and Innovative Organizational Structures .” Conference, Rome, Italy March 31-April 2. ...Intelligence Analysis, Joint Operational Planning, Cellular Automata, Agent- Based Modeling 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT 18

33 CFR 148.722 - Should the construction plan incorporate best available technology and recommended industry...

Code of Federal Regulations, 2010 CFR

2010-07-01

... incorporate best available technology and recommended industry practices? 148.722 Section 148.722 Navigation... plan incorporate best available technology and recommended industry practices? Each applicant must... industry practices as directed in § 148.730. ...

33 CFR 148.722 - Should the construction plan incorporate best available technology and recommended industry...

Code of Federal Regulations, 2012 CFR

2012-07-01

... incorporate best available technology and recommended industry practices? 148.722 Section 148.722 Navigation... plan incorporate best available technology and recommended industry practices? Each applicant must... industry practices as directed in § 148.730. ...

77 FR 33498 - Joint Industry Plans; Order Approving, on a Pilot Basis, the National Market System Plan To...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-06

... pilot program, which was implemented through a series of rule filings by the Exchanges and FINRA. This... as a one-year pilot program in two Phases. Phase I of the Plan would be implemented immediately...

Summary proceedings of the joint industry-FAA conference on the development and use of PC-based aviation training devices.

DOT National Transportation Integrated Search

1994-11-01

This report is a summarization of the proceedings of a joint industry FAA conference on the development and use of PC-based aviation training devices (PCATDs) that was held June 16-17, 1994, in Oklahoma City, Oklahoma. Attendees to the conference inc...

Exact and explicit optimal solutions for trajectory planning and control of single-link flexible-joint manipulators

NASA Technical Reports Server (NTRS)

Chen, Guanrong

1991-01-01

An optimal trajectory planning problem for a single-link, flexible joint manipulator is studied. A global feedback-linearization is first applied to formulate the nonlinear inequality-constrained optimization problem in a suitable way. Then, an exact and explicit structural formula for the optimal solution of the problem is derived and the solution is shown to be unique. It turns out that the optimal trajectory planning and control can be done off-line, so that the proposed method is applicable to both theoretical analysis and real time tele-robotics control engineering.

Summary and results of the joint WMD-DAC/Alameda County bioterrorism response plan exercise.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Manley, Dawn Kataoka; Lipkin, Joel; West, Todd H.

2003-11-01

On June 12,2003, the Alameda County Public Health Department and Sandia National Laboratories/CA jointly conducted an exercise that used a Weapons of Mass Destruction-Decision Analysis Center (WMD-DAC) bioterrorism attack simulation to test the effectiveness of the county's emergency response plan. The exercise was driven by an assumed release (in the vicinity of the Berkeley Marina), and subsequent spread, of a small quantity of aerosolized, weapons-grade anthrax spores. The simulation used several key WMD-DAC capabilities, namely: (1) integration with an atmospheric dispersion model to calculate expected dose levels in the affected areas, (2) a individual-tracking capability for both infected and non-infectedmore » persons as they made decisions, sought treatment, and received prophylaxis drugs, and (3) a user interface that allows exercise participants to affect the scenario evolution and outcome. The analysis of the county's response plan included documenting and reviewing the decisions made by participants during the exercise. Twenty-six local and regional officials representing the health care system, emergency medical services and law enforcement were involved in responding to the simulated attack. The results of this joint effort include lessons learned both by the Alameda County officials regarding implementation of their bioterrorism response plan and by the Sandia representatives about conducting exercises of this type. These observations are reviewed in this report, and they form a basis for providing a better understanding of group/individual decision processes and for identifying effective communication options among decision makers.« less

76 FR 31647 - Joint Industry Plan; Notice of Filing of a National Market System Plan to Address Extraordinary...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-01

... publication of the Commission's order approving the proposed Plan in the Federal Register. D. Development and..., Illinois 60605 (5) EDGA Exchange, Inc., 545 Washington Boulevard, Sixth Floor, Jersey City, NJ 07310 (6) EDGX Exchange, Inc., 545 Washington Boulevard, Sixth Floor, Jersey City, NJ 07310 (7) Financial...

Joining up health and planning: how Joint Strategic Needs Assessment (JSNA) can inform health and wellbeing strategies and spatial planning.

PubMed

Tomlinson, Paul; Hewitt, Stephen; Blackshaw, Neil

2013-09-01

There has been a welcome joining up of the rhetoric around health, the environment and land use or spatial planning in both the English public health white paper and the National Planning Policy Framework. However, this paper highlights a real concern that this is not being followed through into practical guidance needed by local authorities (LAs), health bodies and developers about how to deliver this at the local level. The role of Joint Strategic Needs Assessments (JSNAs) and Health and Wellbeing Strategies (HWSs) have the potential to provide a strong basis for integrated local policies for health improvement, to address the wider determinants of health and to reduce inequities. However, the draft JSNA guidance from the Department of Health falls short of providing a robust, comprehensive and practical guide to meeting these very significant challenges. The paper identifies some examples of good practice. It recommends that action should be taken to raise the standards of all JSNAs to meet the new challenges and that HWSs should be aligned spatially and temporally with local plans and other LA strategies. HWSs should also identify spatially targeted interventions that can be delivered through spatial planning or transport planning. Steps need to be taken to ensure that district councils are brought into the process.

Ball-joint grounding ring

NASA Technical Reports Server (NTRS)

Aperlo, P. J. A.; Buck, P. A.; Weldon, V. A.

1981-01-01

In ball and socket joint where electrical insulator such as polytetrafluoroethylene is used as line to minimize friction, good electrical contact across joint may be needed for lightning protection or to prevent static-charge build-up. Electrical contact is maintained by ring of spring-loaded fingers mounted in socket. It may be useful in industry for cranes, trailers, and other applications requiring ball and socket joint.

US Army War College Interwar Period Curriculum: Logistics and Joint Coordination

DTIC Science & Technology

2017-05-25

indicated in the War Department General Mobilization Plan. Third, the G-3 Course, while receiving the same twenty- four days as the G-4 Course, also...transportation, and relations of supply and strategy. The G-4 Course was followed by the ASW Course for a total of forty- four days of logistics focused...Focusing on joint and logistics inclusion in the course, four were graduates of the NWC, and seven were graduates of the Army Industrial College. The ever

33 CFR 148.722 - Should the construction plan incorporate best available technology and recommended industry...

Code of Federal Regulations, 2014 CFR

2014-07-01

... incorporate best available technology and recommended industry practices? 148.722 Section 148.722 Navigation... plan incorporate best available technology and recommended industry practices? Each applicant must... industry practices as directed in § 148.730 of this part. [USCG-1998-3884, 71 FR 57651, Sept. 29, 2006, as...

33 CFR 148.722 - Should the construction plan incorporate best available technology and recommended industry...

Code of Federal Regulations, 2013 CFR

2013-07-01

... incorporate best available technology and recommended industry practices? 148.722 Section 148.722 Navigation... plan incorporate best available technology and recommended industry practices? Each applicant must... industry practices as directed in § 148.730 of this part. [USCG-1998-3884, 71 FR 57651, Sept. 29, 2006, as...

The Challenge of Measurement: Statistics for Planning Human Resource Development. Conference Paper

ERIC Educational Resources Information Center

Karmel, Tom

2011-01-01

This presentation was made to a breakout session at the 2011 Skills Australia and Industry Skills Councils joint conference, "Putting Skills at the Heart of Economy". The paper addresses the challenge of measurement in workforce development planning and discusses the role of the various players in the labour and training…

77 FR 38088 - Development of the Joint Strategic Plan on Intellectual Property Enforcement; Request of the U.S...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-26

... OFFICE OF MANAGEMENT AND BUDGET Development of the Joint Strategic Plan on Intellectual Property Enforcement; Request of the U.S. Intellectual Property Enforcement Coordinator for Public Comments AGENCY: Office of the U.S. Intellectual Property Enforcement Coordinator, Executive Office of the President...

Generation expansion planning in a competitive electric power industry

NASA Astrophysics Data System (ADS)

Chuang, Angela Shu-Woan

This work investigates the application of non-cooperative game theory to generation expansion planning (GEP) in a competitive electricity industry. We identify fundamental ways competition changes the nature of GEP, review different models of oligopoly behavior, and argue that assumptions of the Cournot model are compatible with GEP. Applying Cournot theory of oligopoly behavior, we formulate a GEP model that may characterize expansion in the new competitive regime, particularly in pool-dominated generation supply industries. Our formulation incorporates multiple markets and is patterned after the basic design of the California ISO/PX system. Applying the model, we conduct numerical experiments on a test system, and analyze generation investment and market participation decisions of different candidate expansion units that vary in costs and forced outage rates. Simulations are performed under different scenarios of competition. In particular, we observe higher probabilistic measures of reliability from Cournot expansion compared to the expansion plan of a monopoly with an equivalent minimum reserve margin requirement. We prove several results for a subclass of problems encompassed by our formulation. In particular, we prove that under certain conditions Cournot competition leads to greater total capacity expansion than a situation in which generators collude in a cartel. We also show that industry output after introduction of new technology is no less than monopoly output. So a monopoly may lack sufficient incentive to introduce new technologies. Finally, we discuss the association between capacity payments and the issue of pricing reliability. And we derive a formula for computing ideal capacity payment rates by extending the Value of Service Reliability technique.

29 CFR 4211.3 - Special rules for construction industry and IRC section 404(c) plans.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 9 2014-07-01 2014-07-01 false Special rules for construction industry and IRC section 404... WITHDRAWING EMPLOYERS General § 4211.3 Special rules for construction industry and IRC section 404(c) plans... covers employees in the building and construction industry shall use the presumptive method for...

29 CFR 4211.3 - Special rules for construction industry and IRC section 404(c) plans.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 9 2013-07-01 2013-07-01 false Special rules for construction industry and IRC section 404... WITHDRAWING EMPLOYERS General § 4211.3 Special rules for construction industry and IRC section 404(c) plans... covers employees in the building and construction industry shall use the presumptive method for...

29 CFR 4211.3 - Special rules for construction industry and IRC section 404(c) plans.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 9 2012-07-01 2012-07-01 false Special rules for construction industry and IRC section 404... WITHDRAWING EMPLOYERS General § 4211.3 Special rules for construction industry and IRC section 404(c) plans... covers employees in the building and construction industry shall use the presumptive method for...

29 CFR 4211.3 - Special rules for construction industry and IRC section 404(c) plans.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false Special rules for construction industry and IRC section 404... WITHDRAWING EMPLOYERS General § 4211.3 Special rules for construction industry and IRC section 404(c) plans... covers employees in the building and construction industry shall use the presumptive method for...

29 CFR 4211.3 - Special rules for construction industry and IRC section 404(c) plans.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 9 2011-07-01 2011-07-01 false Special rules for construction industry and IRC section 404... WITHDRAWING EMPLOYERS General § 4211.3 Special rules for construction industry and IRC section 404(c) plans... covers employees in the building and construction industry shall use the presumptive method for...

Planning, Management and Evaluation: Realizing PIC Potential. Private Industry Council Guide. Working Draft.

ERIC Educational Resources Information Center

National Alliance of Business, Inc., Washington, DC.

This Planning, Management, and Evaluation (PME) guide was developed by the National Alliance of Business as part of its program of management assistance for Private Industry Councils (PICs). The guide is a tool which PICs can use to improve their capability to plan, manage, and evaluate the programs which they administer, and to establish locally…

SouthWest Elevation, Plan Showing Deck Framing, Deck Plan, Plan of ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

South-West Elevation, Plan Showing Deck Framing, Deck Plan, Plan of Collar Beams, Etc., Typical Framing Details, End Elevations, Elevation of Scarf Top Chord, Joint Details - Perrine's Bridge, Spanning Wallkill River, Rifton, Ulster County, NY

Implementation Plan for Chemical Industry R&D Roadmap for Nanomaterials by Design

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2006-04-01

The purpose of this effort is to develop an implementation plan to realize the vision and goals identified in the Chemical Industry R&D Roadmap for Nanomaterials By Design: From Fundamentals to Function.

An industrial robot singular trajectories planning based on graphs and neural networks

NASA Astrophysics Data System (ADS)

Łęgowski, Adrian; Niezabitowski, Michał

2016-06-01

Singular trajectories are rarely used because of issues during realization. A method of planning trajectories for given set of points in task space with use of graphs and neural networks is presented. In every desired point the inverse kinematics problem is solved in order to derive all possible solutions. A graph of solutions is made. The shortest path is determined to define required nodes in joint space. Neural networks are used to define the path between these nodes.

Planning Industrial Training.

ERIC Educational Resources Information Center

Evans, Eric; And Others

Under the pressure of economic conditions and the stimulus of the Industrial Training Act, industrial and commercial firms in Great Britain are acting more and more in the belief that training is inseparable from the mainstream of their activities. This pamphlet is concerned with issues of practical importance in this context: the relative…

Foundation-industry relationships--a new business model joint-venture philanthropy in therapy development.

PubMed

Bartek, Ronald J

2014-01-01

The business model for medical therapy development has changed drastically. Large companies that once conducted their own Research and Development (R&D) and funded all the preclinical studies, all phases of clinical development and marketing of the products are increasingly turning to others for more and more of the earlier work in hopes of being able to in-license a de-risked program well downstream, take it through the final phases of clinical development and into the marketplace. This new paradigm has required patient-advocacy foundations, especially in the rare-disease space, to become far more effective in building relationships with all the players along the therapy-development pathway -- academic scientists, government agencies, other foundations with overlapping interests, biotechs, small biopharmaceutical entities and even the larger industry companies. From the perspective of the patient-advocacy community, these increasingly essential public-private partnerships have taken on the nature of what could be called joint-venture philanthropy and involve a broad spectrum of collaborations and financial relationships between foundations and industry partners that are not without concerns about potential conflicts of interest.

Infrastructure Joint Venture Projects in Malaysia: A Preliminary Study

NASA Astrophysics Data System (ADS)

Romeli, Norsyakilah; Muhamad Halil, Faridah; Ismail, Faridah; Sufian Hasim, Muhammad

2018-03-01

As many developed country practise, the function of the infrastructure is to connect the each region of Malaysia holistically and infrastructure is an investment network projects such as transportation water and sewerage, power, communication and irrigations system. Hence, a billions allocations of government income reserved for the sake of the infrastructure development. Towards a successful infrastructure development, a joint venture approach has been promotes by 2016 in one of the government thrust in Construction Industry Transformation Plan which encourage the internationalisation among contractors. However, there is depletion in information on the actual practise of the infrastructure joint venture projects in Malaysia. Therefore, this study attempt to explore the real application of the joint venture in Malaysian infrastructure projects. Using the questionnaire survey, a set of survey question distributed to the targeted respondents. The survey contained three section which the sections are respondent details, organizations background and project capital in infrastructure joint venture project. The results recorded and analyse using SPSS software. The contractors stated that they have implemented the joint venture practice with mostly the client with the usual construction period of the infrastructure project are more than 5 years. Other than that, the study indicates that there are problems in the joint venture project in the perspective of the project capital and the railway infrastructure should be given a highlights in future study due to its high significant in term of cost and technical issues.

Mapping tobacco industry strategies in South East Asia for action planning and surveillance

PubMed Central

Stillman, F; Hoang, M; Linton, R; Ritthiphakdee, B; Trochim, W

2008-01-01

Objective: To develop a comprehensive conceptual framework of tobacco industry tactics in four countries in South East Asia for the purpose of: (1) generating consensus on key areas of importance and feasibility for regional and cross country tobacco industry monitoring and surveillance; (2) developing measures to track and monitor the effects of the tobacco industry and to design counterstrategies; and (3) building capacity to improve tobacco control planning in the participating countries. Design: A structured conceptualisation methodology known as concept mapping was used. The process included brainstorming, sorting and rating of statements describing industry activities. Statistical analyses used multidimensional scaling and cluster analysis. Interpretation of the maps was participatory, using regional tobacco control researchers, practitioners, and policy makers during a face to face meeting. Participants: 31 participants in this study come from the four countries represented in the project along with six people from the Johns Hopkins Blomberg School of Public Health. Conclusions: The map shows eight clusters of industry activities within the four countries. These were arranged into four general sectors: economics, politics, public relations and deception. For project design purposes, the map indicates areas of importance and feasibility for monitoring tobacco industry activities and serves as a basis for an initial discussion about action planning. Furthermore, the development of the map used a consensus building process across different stakeholders or stakeholder agencies and is critical when developing regional, cross border strategies for tracking and surveillance. PMID:18218787

Pandemic planning in the shipping industry--lessons learnt from the 2009 Influenza Pandemic.

PubMed

Bunyan, Kate

2011-01-01

The events around the 2009 A/H1N1 Influenza Pandemic highlighted the need for better planning to ensure protection of those on vessels, protection for ports of call, and protection of business assets (business continuity). The variety of stakeholders involved in the management of a pandemic made it difficult to achieve a cohesive plan during the event itself. By considering the actions during the last pandemic, and the literature available for the shipping industry on pandemic planning, a pathway to better preparation is suggested.

Kinematic path planning for space-based robotics

NASA Astrophysics Data System (ADS)

Seereeram, Sanjeev; Wen, John T.

1998-01-01

Future space robotics tasks require manipulators of significant dexterity, achievable through kinematic redundancy and modular reconfigurability, but with a corresponding complexity of motion planning. Existing research aims for full autonomy and completeness, at the expense of efficiency, generality or even user friendliness. Commercial simulators require user-taught joint paths-a significant burden for assembly tasks subject to collision avoidance, kinematic and dynamic constraints. Our research has developed a Kinematic Path Planning (KPP) algorithm which bridges the gap between research and industry to produce a powerful and useful product. KPP consists of three key components: path-space iterative search, probabilistic refinement, and an operator guidance interface. The KPP algorithm has been successfully applied to the SSRMS for PMA relocation and dual-arm truss assembly tasks. Other KPP capabilities include Cartesian path following, hybrid Cartesian endpoint/intermediate via-point planning, redundancy resolution and path optimization. KPP incorporates supervisory (operator) input at any detail to influence the solution, yielding desirable/predictable paths for multi-jointed arms, avoiding obstacles and obeying manipulator limits. This software will eventually form a marketable robotic planner suitable for commercialization in conjunction with existing robotic CAD/CAM packages.

Ohio Route 50 joint sealant experiment : research implementation plan.

DOT National Transportation Integrated Search

2005-05-01

Research in the state of Wisconsin over the past forty years has found no noticeable difference in : performance between jointed concrete pavement (JCP) constructed with a sealed contraction joint and : JCP constructed with a single, narrow, unsealed...

Joint ventures: to pursue or not to pursue?

PubMed

Blaszyk, Michael D; Hill-Mischel, Jody

2007-11-01

Hospitals should carefully select joint venture partners. The joint venture evaluation process should involve a high-level screen of strategic opportunities. Hospitals should develop a full business plan for the joint venture.

An Optimized Trajectory Planning for Welding Robot

NASA Astrophysics Data System (ADS)

Chen, Zhilong; Wang, Jun; Li, Shuting; Ren, Jun; Wang, Quan; Cheng, Qunchao; Li, Wentao

2018-03-01

In order to improve the welding efficiency and quality, this paper studies the combined planning between welding parameters and space trajectory for welding robot and proposes a trajectory planning method with high real-time performance, strong controllability and small welding error. By adding the virtual joint at the end-effector, the appropriate virtual joint model is established and the welding process parameters are represented by the virtual joint variables. The trajectory planning is carried out in the robot joint space, which makes the control of the welding process parameters more intuitive and convenient. By using the virtual joint model combined with the B-spline curve affine invariant, the welding process parameters are indirectly controlled by controlling the motion curve of the real joint. To solve the optimal time solution as the goal, the welding process parameters and joint space trajectory joint planning are optimized.

Transportation Technology Curriculum Materials FY 90. Illinois Plan for Industrial Technology Education.

ERIC Educational Resources Information Center

Gallo, Dennis; And Others

This packet contains technology-based learning activities for the transportation technology course at the orientation level (grades 9 and 10) of the Illinois Plan for Industrial Technology Education curriculum project. The packet includes a course rationale, mission, description, and course outline. Suggested learning objectives and suggested…

Industrial Fuel Gas Demonstration Plant Program: environmental permit compliance plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bodamer, Jr., James W.; Bocchino, Robert M.

1979-11-01

This Environmental Permit Compliance Plan is intended to assist the Memphis Light, Gas and Water Division in acquiring the necessary environmental permits for their proposed Industrial Fuel Gas Demonstration Plant in a time frame consistent with the construction schedule. Permits included are those required for installation and/or operation of gaseous, liquid and solid waste sources and disposal areas. Only those permits presently established by final regulations are described. The compliance plan describes procedures for obtaining each permit from identified federal, state and local agencies. The information needed for the permit application is presented, and the stepwise procedure to follow whenmore » filing the permit application is described. Information given in this plan was obtained by reviewing applicable laws and regulations and from telephone conversations with agency personnel on the federal, state and local levels. This Plan also presents a recommended schedule for beginning the work necessary to obtain the required environmental permits in order to begin dredging operations in October, 1980 and construction of the plant in September, 1981. Activity for several key permits should begin as soon as possible.« less

PRN 2011-1: Residential Exposure Joint Venture

EPA Pesticide Factsheets

This PR Notice is to advise registrants of an industry-wide joint venture, titled the Residential Exposure Joint Venture (REJV), which has developed a national survey regarding residential consumer use/usage data for pesticides.

Trajectory planning and optimal tracking for an industrial mobile robot

NASA Astrophysics Data System (ADS)

Hu, Huosheng; Brady, J. Michael; Probert, Penelope J.

1994-02-01

This paper introduces a unified approach to trajectory planning and tracking for an industrial mobile robot subject to non-holonomic constraints. We show (1) how a smooth trajectory is generated that takes into account the constraints from the dynamic environment and the robot kinematics; and (2) how a general predictive controller works to provide optimal tracking capability for nonlinear systems. The tracking performance of the proposed guidance system is analyzed by simulation.

TRANSPORT PLANNING MODEL FOR WIDE AREA RECYCLING SYSTEM OF INDUSTRIAL WASTE PLASTIC

NASA Astrophysics Data System (ADS)

Arai, Yasuhiro; Kawamura, Hisashi; Koizumi, Akira; Mogi, Satoshi

To date, the majority of industrial waste plastic generated in an urban city has been processed into landfill. However, it is now necessary to actively utilize that plastic as a useful resource to create a recycling society with a low environment influence. In order to construct a reasonable recycling system, it is necessary to address the "transportation problem," which means determining how much industrial waste plastic is to be transported to what location. With the goal of eliminating landfill processing, this study considers a transport planning model for industrial waste plastic applying linear programming. The results of running optimized calculations under given scenarios clarified not only the possibilities for recycle processing in the Metropolitan area, but also the validity of wide area recycling system.

Case-Based Planning: An Integrated Theory of Planning, Learning and Memory

DTIC Science & Technology

1986-10-01

rtvoeoo oldo II nocomtmry and Idonltly by block numbor) planning Case-based reasoning learning Artificial Intelligence 20. ABSTRACT (Conllnum...Computational Model of Analogical Prob- lem Solving, Proceedings of the Seventh International Joint Conference on Artificial Intelligence ...Understanding and Generalizing Plans., Proceedings of the Eight Interna- tional Joint Conference on Artificial Intelligence , IJCAI, Karlsrhue, Germany

Experimental determination of frequency response function estimates for flexible joint industrial manipulators with serial kinematics

NASA Astrophysics Data System (ADS)

Saupe, Florian; Knoblach, Andreas

2015-02-01

Two different approaches for the determination of frequency response functions (FRFs) are used for the non-parametric closed loop identification of a flexible joint industrial manipulator with serial kinematics. The two applied experiment designs are based on low power multisine and high power chirp excitations. The main challenge is to eliminate disturbances of the FRF estimates caused by the numerous nonlinearities of the robot. For the experiment design based on chirp excitations, a simple iterative procedure is proposed which allows exploiting the good crest factor of chirp signals in a closed loop setup. An interesting synergy of the two approaches, beyond validation purposes, is pointed out.

2011 Joint Program Executive Office for Chemical and Biological Defense Advance Planning Briefing for Industry (APBI) Held in Baltimore, Maryland on September 7-9, 2011

DTIC Science & Technology

2011-09-09

Chemical and Biological Defense Defense Threat Reduction Agency (DTRA)/Joint Science & Technology Office (JSTO) Dr. Alan Rudolph , Director, Chemical...Mr. Douglas W. Bryce 9:05 am – 9:45 am Dr. Alan Rudolph Director, Chemical and Biological Technologies Directorate, Defense Threat Reduction...Joint Science and Technology Office for Chemical and Biological Defense Dr. Alan S. Rudolph Mr. David K. Grimm Acting Heidi Shyu Joint Combat

Planning and conducting medical support to joint operations.

PubMed

Hughes, A S

2000-01-01

Operations are core business for all of us and the PJHQ medical cell is at the heart of this process. With the likelihood of a continuing UK presence in the Balkans for some time to come, the challenge of meeting this and any other new operational commitments will continue to demand a flexible and innovative approach from all concerned. These challenges together with the Joint and multinational aspects of the job make the PJHQ medical cell a demanding but rewarding place to work and provide a valuable Joint staff training opportunity for the RNMS.

Joint Ventures: A New Agenda for Education.

ERIC Educational Resources Information Center

Griffin, Dean

1989-01-01

The author states that vocational education can join in partnerships with industry, labor, and government to contribute to economic development. Examples of current programs are included. The "joint venture" concept is explained and ideas for forming joint ventures are shared. (CH)

Strength of Welded Joints in Tubular Members for Aircraft

NASA Technical Reports Server (NTRS)

Whittemore, H L; Brueggeman, W C

1931-01-01

The object of this investigation is to make available to the aircraft industry authoritative information on the strength, weight, and cost of a number of types of welded joints. This information will, also, assist the aeronautics branch in its work of licensing planes by providing data from which the strength of a given joint may be estimated. As very little material on the strength of aircraft welds has been published, it is believed that such tests made by a disinterested governmental laboratory should be of considerable value to the aircraft industry. Forty joints were welded under procedure specifications and tested to determine their strengths. The weight and time required to fabricate were also measured for each joint.

Sustainable aggregate production planning in the chemical process industry - A benchmark problem and dataset.

PubMed

Brandenburg, Marcus; Hahn, Gerd J

2018-06-01

Process industries typically involve complex manufacturing operations and thus require adequate decision support for aggregate production planning (APP). The need for powerful and efficient approaches to solve complex APP problems persists. Problem-specific solution approaches are advantageous compared to standardized approaches that are designed to provide basic decision support for a broad range of planning problems but inadequate to optimize under consideration of specific settings. This in turn calls for methods to compare different approaches regarding their computational performance and solution quality. In this paper, we present a benchmarking problem for APP in the chemical process industry. The presented problem focuses on (i) sustainable operations planning involving multiple alternative production modes/routings with specific production-related carbon emission and the social dimension of varying operating rates and (ii) integrated campaign planning with production mix/volume on the operational level. The mutual trade-offs between economic, environmental and social factors can be considered as externalized factors (production-related carbon emission and overtime working hours) as well as internalized ones (resulting costs). We provide data for all problem parameters in addition to a detailed verbal problem statement. We refer to Hahn and Brandenburg [1] for a first numerical analysis based on and for future research perspectives arising from this benchmarking problem.

A joint urban planning and public health framework: contributions to health impact assessment.

PubMed

Northridge, Mary E; Sclar, Elliott

2003-01-01

A joint urban planning and public health perspective is articulated here for use, in health impact assessment. Absent a blueprint for a coherent and supportive structure on which to test our thinking, we are bound to fall flat. Such a perspective is made necessary by the sheer number of people living in cities throughout the world, the need for explicit attention to land use and transportation systems as determinants of population health, and the dearth of useful indicators of the built environment for monitoring progress. If explicit attention is not paid to the overarching goals of equality and democracy, they have little if any chance of being realized in projects, programs, and policies that shape the built environment and therefore the public's health.

The Joint Action on Health Workforce Planning and Forecasting: Results of a European programme to improve health workforce policies.

PubMed

Kroezen, Marieke; Van Hoegaerden, Michel; Batenburg, Ronald

2018-02-01

Health workforce (HWF) planning and forecasting is faced with a number of challenges, most notably a lack of consistent terminology, a lack of data, limited model-, demand-based- and future-based planning, and limited inter-country collaboration. The Joint Action on Health Workforce Planning and Forecasting (JAHWF, 2013-2016) aimed to move forward on the HWF planning process and support countries in tackling the key challenges facing the HWF and HWF planning. This paper synthesizes and discusses the results of the JAHWF. It is shown that the JAHWF has provided important steps towards improved HWF planning and forecasting across Europe, among others through the creation of a minimum data set for HWF planning and the 'Handbook on Health Workforce Planning Methodologies across EU countries'. At the same time, the context-sensitivity of HWF planning was repeatedly noticeable in the application of the tools through pilot- and feasibility studies. Further investments should be made by all actors involved to support and stimulate countries in their HWF efforts, among others by implementing the tools developed by the JAHWF in diverse national and regional contexts. Simultaneously, investments should be made in evaluation to build a more robust evidence base for HWF planning methods. Copyright © 2017 Elsevier B.V. All rights reserved.

A comprehensive education plan: the key to a successful Joint Commission on Accreditation of Healthcare Organizations survey.

PubMed

Thurber, Raymond; Read, Linda Eklof

2008-01-01

This article describes how education specialists from a 359-bed acute care hospital in the Northeast developed and implemented a comprehensive educational plan to prepare all staff members on the Joint Commission on Accreditation of Healthcare Organizations (JCAHO) tracer methodology and upcoming triennial survey. This methodology can be utilized by staff development educators in any setting to not only prepare staff members for a successful JCAHO survey but also to meet or exceed JCAHO standards in one's everyday job.

Challenges facing the North American iron ore industry

USGS Publications Warehouse

Jorgenson, J.D.

2005-01-01

During the 20th century, the iron ore mining industries of Canada and the United States passed through several periods of transformation. The beginning of the 21st century has seen yet another period of transformation, with the economic failure of a number of steel companies, the acquisition of their facilities by more viable steelmakers, and the consolidation of control within the North American iron ore industry. Changes in Canadian and United States iron ore production and the market control structure involved are analysed. The consolidation of ownership, formation of foreign joint ventures within Nordi America, planned divestitures of upstream activities by steelmakers, and industry changes made to ensure availability of feedstocks will be reviewed. The ttaditional isolation of the Canadian and United States iron ore operations and their strong linkage to downstream steel production will be discussed in the context of a changing global economy. Management-labour conflicts that have taken place and agreements made during 2000 through 2004 will be discussed in the context of the economic environment leading up to these agreements. Cooperative agreements between competing Canadian and United States companies to resolve client needs in processing and blending will be examined. A joint industry-government project designed to use new technology to produce direct reduced iron nuggets of 96 - 98 per cent iron content using non-coking coals will also be assessed. Changes in iron ore transportation methods, ownership and infrastructure will be reviewed for both rail and inland waterway transport between Canadian and United States companies. A brief analysis of social and environmental issues relating to sustainable development of the Canadian-United States iron ore industry will be included.

Travel Health Advisory Group: a joint travel industry and travel health Special Interest Group promoting healthy travel in Australia.

PubMed

Leggat, Peter A; Zwar, Nicholas; Hudson, Bernie

2012-09-01

The Travel Health Advisory Group (THAG), established in 1997, is a joint initiative between the travel industry and travel health professionals in Australia that aims to promote healthy travel. THAG seeks to promote cooperation in improving the health of travellers between the travel industry and travel medicine professionals and to raise public awareness of the importance of travel health. From 2011, THAG has been a Special Interest Group of The Australasian College of Tropical Medicine and its membership has been active in several areas, including web-based travel health information, travel health promotion, media releases, research and education in Australia. Information is given on the objectives, membership and an overview of the various activities of the group. Copyright © 2012 Elsevier Ltd. All rights reserved.

Intrafirm planning and mathematical modeling of owner's equity in industrial enterprises

NASA Astrophysics Data System (ADS)

Ponomareva, S. V.; Zheleznova, I. V.

2018-05-01

The article aims to review the different approaches to intrafirm planning of owner's equity in industrial enterprises. Since charter capital, additional capital and reserve capital do not change in the process of enterprise activity, the main interest lies on the field of share repurchases from shareholders and retained earnings within the owner's equity of the enterprise. In order to study the effect of share repurchases on the activities of the enterprise, let us use such mathematical methods as event study and econometric modeling. This article describes the step-by-step algorithm of carrying out event study and justifies the choice of Logit model in econometric analysis. The article represents basic results of conducted regression analysis on the effect of share repurchases on the key financial indicators in industrial enterprises.

Systematic strategies for the third industrial accident prevention plan in Korea.

PubMed

Kang, Young-sig; Yang, Sung-hwan; Kim, Tae-gu; Kim, Day-sung

2012-01-01

To minimize industrial accidents, it's critical to evaluate a firm's priorities for prevention factors and strategies since such evaluation provides decisive information for preventing industrial accidents and maintaining safety management. Therefore, this paper proposes the evaluation of priorities through statistical testing of prevention factors with a cause analysis in a cause and effect model. A priority matrix criterion is proposed to apply the ranking and for the objectivity of questionnaire results. This paper used regression method (RA), exponential smoothing method (ESM), double exponential smoothing method (DESM), autoregressive integrated moving average (ARIMA) model and proposed analytical function method (PAFM) to analyze trends of accident data that will lead to an accurate prediction. This paper standardized the questionnaire results of workers and managers in manufacturing and construction companies with less than 300 employees, located in the central Korean metropolitan areas where fatal accidents have occurred. Finally, a strategy was provided to construct safety management for the third industrial accident prevention plan and a forecasting method for occupational accident rates and fatality rates for occupational accidents per 10,000 people.

The need for strategic tax planning among nonprofit hospitals.

PubMed

Smith, Pamela C

2005-01-01

Strategic tax planning issues are important to the nonprofit health care sector, despite its philanthropic mission. The consolidation of the industry has led management to fight for resources and develop alternative strategies for raising money. When management evaluates alternative collaborative structures to increase efficiency, the impact on governance structures must also be considered. The increased governmental scrutiny of joint ventures within the health care sector warrants management's attention as well. The financial incentives must be considered, along with the various tax policy implications of cross-sector collaborations.

A research experiment on facilitation and formation of joint research and development programs between government, industry, and universities: Overview, preliminary findings, and observations

NASA Technical Reports Server (NTRS)

Shariq, Syed Z.

1992-01-01

Presented is an overview of an experiment to explore the free-market approach to public-private collaboration through the development and implementation of a joint venture mechanism to enable formation of R&D projects between government, industry and academia. Some preliminary results related to time-to-commercialization and economic competitiveness are discussed.

Planning for Multiagent Using ASP-Prolog

NASA Astrophysics Data System (ADS)

Son, Tran Cao; Pontelli, Enrico; Nguyen, Ngoc-Hieu

This paper presents an Answer Set Programming based approach to multiagent planning. The proposed methodology extends the action language \\cal B in [12] to represent and reason about plans with cooperative actions of an individual agent operating in a multiagent environment. This language is used to formalize multiagent planning problems and the notion of a joint plan for multiagent in the presence of cooperative actions. Finally, the paper presents a system for computing joint plans based on the ASP-Prolog system.

Environmental impact assessment of the industrial estate development plan with the geographical information system and matrix methods.

PubMed

Ghasemian, Mohammad; Poursafa, Parinaz; Amin, Mohammad Mehdi; Ziarati, Mohammad; Ghoddousi, Hamid; Momeni, Seyyed Alireza; Rezaei, Amir Hossein

2012-01-01

The purpose of this study is environmental impact assessment of the industrial estate development planning. This cross-sectional study was conducted in 2010 in Isfahan province, Iran. GIS and matrix methods were applied. Data analysis was done to identify the current situation of the region, zoning vulnerable areas, and scoping the region. Quantitative evaluation was done by using matrix of Wooten and Rau. The net score for impact of industrial units operation on air quality of the project area was (-3). According to the transition of industrial estate pollutants, residential places located in the radius of 2500 meters of the city were expected to be affected more. The net score for impact of construction of industrial units on plant species of the project area was (-2). Environmental protected areas were not affected by the air and soil pollutants because of their distance from industrial estate. Positive effects of project activities outweigh the drawbacks and the sum scores allocated to the project activities on environmental factor was (+37). Totally it does not have detrimental effects on the environment and residential neighborhood. EIA should be considered as an anticipatory, participatory environmental management tool before determining a plan application.

A new kind of end-glued joint for the hardwood industry

Treesearch

Philip A. Araman

1973-01-01

A method has been developed for end- and edge-gluing short pieces of high-value hardwood lumber into long panels, using a curved end joint we call SEM (Serpentine End Matching). Panels containing SEM end joints are aesthetically pleasing and are suited for exposed applications such as in finished furniture.

Assessing homeland chemical hazards outside the military gates: industrial hazard threat assessments for department of defense installations.

PubMed

Kirkpatrick, Jeffrey S; Howard, Jacqueline M; Reed, David A

2002-04-08

As part of comprehensive joint medical surveillance measures outlined by the Department of Defense, the US Army Center for Health Promotion and Preventive Medicine (USACHPPM) is beginning to assess environmental health threats to continental US military installations. A common theme in comprehensive joint medical surveillance, in support of Force Health Protection, is the identification and assessment of potential environmental health hazards, and the evaluation and documentation of actual exposures in both a continental US and outside a continental US setting. For the continental US assessments, the USACHPPM has utilized the US Environmental Protection Agency (EPA) database for risk management plans in accordance with Public Law 106-40, and the toxic release inventory database, in a state-of the art geographic information systems based program, termed the Consequence Assessment and Management Tool Set, or CATS, for assessing homeland industrial chemical hazards outside the military gates. As an example, the US EPA toxic release inventory and risk management plans databases are queried to determine the types and locations of industries surrounding a continental US military installation. Contaminants of concern are then ranked with respect to known toxicological and physical hazards, where they are then subject to applicable downwind hazard simulations using applicable meteorological and climatological data sets. The composite downwind hazard areas are mapped in relation to emergency response planning guidelines (ERPG), which were developed by the American Industrial Hygiene Association to assist emergency response personnel planning for catastrophic chemical releases. In addition, other geographic referenced data such as transportation routes, satellite imagery and population data are included in the operational, equipment, and morale risk assessment and management process. These techniques have been developed to assist military medical planners and operations

[An attempt to use ultrasonic technique for confirming the diagnosis, planning and observation of long-term treatment results of painful temporo-mandibular joint dysfunction].

PubMed

Ey-Chmielewska, H

1998-01-01

The author presents an attempt of using ultrasonographic technique in diagnosis, planning and observation of treatment results of temporo-mandibular joint pain dysfunctions. Temporo-mandibular joint pain dysfunctions are interchangeably also called temporo-mandibular joint functional disorders. The assessment of pain symptoms in temporo-mandibular joint dysfunctions pain symptoms is principally based on a subjective estimation by the examining practitioner. There is no univocal definition of the disease or a simple index evidencing important symptoms in decision making. Additionally X-ray technique examinations, being hitherto used, in early stages of the disorder do not allow to diagnose it, and are also burdensome to a patient. The aim of this study was to confirm visibility of anatomical elements of the temporo-mandibular joint in an ultrasound examination, assess the mobility of the articular disc before, during and after prosthetic treatment with and without the use of ultrasound technique, and to determine the period of time necessary to obtain a therapeutic effect. The study material consisted of 180 patients, 128 women and 52 men, aged 20 to 60 years, treated by applying prostheses because of temporo-mandibular joint pain dysfunction, in the Department of Prosthetic Dentistry of the Pomeranian Medical Academy. The patients were divided into 2 groups, control and study group. The control group consisted of 90 patients, 63 women and 27 men. In this group prosthetic treatment planning and observation of results was based on a subjective estimation of the practitioner. The study group here comprised 90 patients, 65 women and 25 men, aged 26 to 60 years. In this group prosthetic treatment planning and observation of treatment results were carried on with the use of ultrasound technique. Data from both groups concerning history, results of examinations carried out by ultrasound technique, and the assessment of ultrasound examination were noted on standard

24 CFR 943.128 - How does a consortium carry out planning and reporting functions?

Code of Federal Regulations, 2010 CFR

2010-04-01

... HOUSING, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT PUBLIC HOUSING AGENCY CONSORTIA AND JOINT VENTURES... the consortium agreement, the consortium must submit joint five-year Plans and joint Annual Plans for... the joint PHA Plan. ...

Joint Department of Defense, Advance Planning Briefing to Industry, Held at Kissimmee, Florida, on 30 April - 2 May 1996

DTIC Science & Technology

1996-05-01

Systems 17 Motion Bases Upgraded Aero Misc > Contact Info • AMC, Lt Col Letica , Phone (618) 256-5696 L8 Upgrade Flow Plan Advance Planning Briefing...Projected Schedule: FY 05 > Requirement Document: AMMP >• Projected Program Size: ? < $40M > Funding Status/Stability: > POCs: • AMC, Lt Col Letica

Federal Radionavigation Plan. Volume I. Radionavigation Plans and Policy.

DOT National Transportation Integrated Search

1980-01-01

The Federal Radionavigation Plan (FRP) has been jointly developed by the U.S. Departments of Defense and Transportation to ensure efficient use of resources and full protection of national interests. The plan sets forth the Federal interagency approa...

STS payloads mission control study. Volume 2-A, Task 1: Joint products and functions for preflight planning of flight operations, training and simulations

NASA Technical Reports Server (NTRS)

1976-01-01

Specific products and functions, and associated facility availability, applicable to preflight planning of flight operations were studied. Training and simulation activities involving joint participation of STS and payload operations organizations, are defined. The prelaunch activities required to prepare for the payload flight operations are emphasized.

Joint Seasonal ARMA Approach for Modeling of Load Forecast Errors in Planning Studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hafen, Ryan P.; Samaan, Nader A.; Makarov, Yuri V.

2014-04-14

To make informed and robust decisions in the probabilistic power system operation and planning process, it is critical to conduct multiple simulations of the generated combinations of wind and load parameters and their forecast errors to handle the variability and uncertainty of these time series. In order for the simulation results to be trustworthy, the simulated series must preserve the salient statistical characteristics of the real series. In this paper, we analyze day-ahead load forecast error data from multiple balancing authority locations and characterize statistical properties such as mean, standard deviation, autocorrelation, correlation between series, time-of-day bias, and time-of-day autocorrelation.more » We then construct and validate a seasonal autoregressive moving average (ARMA) model to model these characteristics, and use the model to jointly simulate day-ahead load forecast error series for all BAs.« less

[Implementation of joint-crisis plans--a study of health care users and professionals].

PubMed

Grätz, Juliane; Brieger, Peter

2012-11-01

To study effects of the implementation of joint-crisis plans (JCP) on health-care users and professionals. The first 3 years of the implementation of JCP were followed with structured interviews with health-care users and professionals. Legal and administrative complications were documented. 36 of 44 subjects with JCP were assessed. Most of them had learned of JCP through other users or self-help. 55 % had prior experience with compulsory treatment. Better communication and self-determination were main goals of JCP. A relevant change in hospital treatment through JCP was not observed. Only few professionals had made direct experience with JCP. They valued JCP mildly positive. No legal and administrative complications were documented. Only a small minority of users signed JCP. JCP were easily employed and improved communication and self-determination. © Georg Thieme Verlag KG Stuttgart · New York.

Federal Radionavigation Plan. Vol. 1. Radionavigation Plans and Policy.

DOT National Transportation Integrated Search

1982-03-01

The second edition of the Federal Radionavigation Plan (FRP) has been jointly developed by the U.S. Departments of Defense and Transportation to ensure efficient use of resources and full protection of national interests. The plan sets forth the Fede...

Design and fabrication of realistic adhesively bonded joints

NASA Technical Reports Server (NTRS)

Shyprykevich, P.

1983-01-01

Eighteen bonded joint test specimens representing three different designs of a composite wing chordwise bonded splice were designed and fabricated using current aircraft industry practices. Three types of joints (full wing laminate penetration, two side stepped; midthickness penetration, one side stepped; and partial penetration, scarfed) were analyzed using state of the art elastic joint analysis modified for plastic behavior of the adhesive. The static tensile fail load at room temperature was predicted to be: (1) 1026 kN/m (5860 1b/in) for the two side stepped joint; (2) 925 kN/m (5287 1b/in) for the one side stepped joint; and (3) 1330 kN/m (7600 1b/in) for the scarfed joint. All joints were designed to fail in the adhesive.

Prosthetic Joint Infection

PubMed Central

Tande, Aaron J.

2014-01-01

SUMMARY Prosthetic joint infection (PJI) is a tremendous burden for individual patients as well as the global health care industry. While a small minority of joint arthroplasties will become infected, appropriate recognition and management are critical to preserve or restore adequate function and prevent excess morbidity. In this review, we describe the reported risk factors for and clinical manifestations of PJI. We discuss the pathogenesis of PJI and the numerous microorganisms that can cause this devastating infection. The recently proposed consensus definitions of PJI and approaches to accurate diagnosis are reviewed in detail. An overview of the treatment and prevention of this challenging condition is provided. PMID:24696437

Patient-specific musculoskeletal modeling of the hip joint for preoperative planning of total hip arthroplasty: A validation study based on in vivo measurements

PubMed Central

Schick, Fabian; Asseln, Malte; Damm, Philipp; Radermacher, Klaus

2018-01-01

Validation of musculoskeletal models for application in preoperative planning is still a challenging task. Ideally, the simulation results of a patient-specific musculoskeletal model are compared to corresponding in vivo measurements. Currently, the only possibility to measure in vivo joint forces is to implant an instrumented prosthesis in patients undergoing a total joint replacement. In this study, a musculoskeletal model of the AnyBody Modeling System was adapted patient-specifically and validated against the in vivo hip joint force measurements of ten subjects performing one-leg stance and level walking. The impact of four model parameters was evaluated; hip joint width, muscle strength, muscle recruitment, and type of muscle model. The smallest difference between simulated and in vivo hip joint force was achieved by using the hip joint width measured in computed tomography images, a muscle strength of 90 N/cm2, a third order polynomial muscle recruitment, and a simple muscle model. This parameter combination reached mean deviations between simulation and in vivo measurement during the peak force phase of 12% ± 14% in magnitude and 11° ± 5° in orientation for one-leg stance and 8% ± 6% in magnitude and 10° ± 5° in orientation for level walking. PMID:29649235

Environmental Impact Assessment of the Industrial Estate Development Plan with the Geographical Information System and Matrix Methods

PubMed Central

Ghasemian, Mohammad; Poursafa, Parinaz; Amin, Mohammad Mehdi; Ziarati, Mohammad; Ghoddousi, Hamid; Momeni, Seyyed Alireza; Rezaei, Amir Hossein

2012-01-01

Background. The purpose of this study is environmental impact assessment of the industrial estate development planning. Methods. This cross-sectional study was conducted in 2010 in Isfahan province, Iran. GIS and matrix methods were applied. Data analysis was done to identify the current situation of the region, zoning vulnerable areas, and scoping the region. Quantitative evaluation was done by using matrix of Wooten and Rau. Results. The net score for impact of industrial units operation on air quality of the project area was (−3). According to the transition of industrial estate pollutants, residential places located in the radius of 2500 meters of the city were expected to be affected more. The net score for impact of construction of industrial units on plant species of the project area was (−2). Environmental protected areas were not affected by the air and soil pollutants because of their distance from industrial estate. Conclusion. Positive effects of project activities outweigh the drawbacks and the sum scores allocated to the project activities on environmental factor was (+37). Totally it does not have detrimental effects on the environment and residential neighborhood. EIA should be considered as an anticipatory, participatory environmental management tool before determining a plan application. PMID:22272210

Student-Industry Plan for Action.

ERIC Educational Resources Information Center

National Association of Manufacturers, New York, NY. Education Committee.

The guidelines for a student-industry action committee represent an attempt by the authors to reverse the trend of mistrust demonstrated by the American public toward business and industry. Twelve chapter presidents of Delta Sigma Pi, a university business fraternity, met initially with representatives of the National Association of Manufacturers…

Are joint health plans effective for coordination of health services? An analysis based on theory and Danish pre-reform results

PubMed Central

Strandberg-Larsen, Martin; Bernt Nielsen, Mikkel; Krasnik, Allan

2007-01-01

Background Since 1994 formal health plans have been used for coordination of health care services between the regional and local level in Denmark. From 2007 a substantial reform has changed the administrative boundaries of the system and a new tool for coordination has been introduced. Purpose To assess the use of the pre-reform health plans as a tool for strengthening coordination, quality and preventive efforts between the regional and local level of health care. Methods A survey addressed to: all counties (n=15), all municipalities (n=271) and a randomised selected sample of general practitioners (n=700). Results The stakeholders at the administrative level agree that health plans have not been effective as a tool for coordination. The development of health plans are dominated by the regional level. At the functional level 27 percent of the general practitioners are not familiar with health plans. Among those familiar with health plans 61 percent report that health plans influence their work to only a lesser degree or not at all. Conclusion Joint health planning is needed to achieve coordination of care. Efforts must be made to overcome barriers hampering efficient whole system planning. Active policies emphasising the necessity of health planning, despite involved cost, are warranted to insure delivery of care that benefits the health of the population. PMID:17925882

How to establish and sustain a joint venture in China.

PubMed

Lee, Paul

2008-01-01

Joint ventures with Chinese companies provide one of the most effective ways for international companies to establish a foothold in the booming Chinese economy. The benefits, opportunities and challenges of establishing a joint venture are explored here. Current partnering trends and successful Sino-foreign joint ventures in the fast-growing medical device industry in China are also highlighted.

Asian/Pacific Joint Production Programme of Materials for Neo-Literates in Rural Areas Planning Meeting (Tokyo, Japan, March 4-5, 1991). Report.

ERIC Educational Resources Information Center

Asian Cultural Centre for UNESCO, Tokyo (Japan).

This document reports on the 1991 Planning Meeting on Asian/Pacific Joint Production (AJP) Program of Materials for Neo-Literates in Rural Areas, the purpose of which was to discuss Asian Cultural Center for Unesco (ACCU) literacy programs to be carried out under regional cooperation. Opening addresses focused on the success of the cooperative…

[Example of product development by industry and research solidarity].

PubMed

Seki, Masayoshi

2014-01-01

When the industrial firms develop the product, the research result from research institutions is used or to reflect the ideas from users on the developed product would be significant in order to improve the product. To state the software product which developed jointly as an example to describe the adopted development technique and its result, and to consider the modality of the industry solidarity seen from the company side and joint development. The software development methods have the merit and demerit and necessary to choose the optimal development technique by the system which develops. We have been jointly developed the dose distribution browsing software. As the software development method, we adopted the prototype model. In order to display the dose distribution information, it is necessary to load four objects which are CT-Image, Structure Set, RT-Plan, and RT-Dose, are displayed in a composite manner. The prototype model which is the development technique was adopted by this joint development was optimal especially to develop the dose distribution browsing software. In a prototype model, since the detail design was created based on the program source code after the program was finally completed, there was merit on the period shortening of document written and consist in design and implementation. This software eventually opened to the public as an open source. Based on this developed prototype software, the release version of the dose distribution browsing software was developed. Developing this type of novelty software, it normally takes two to three years, but since the joint development was adopted, it shortens the development period to one year. Shortening the development period was able to hold down to the minimum development cost for a company and thus, this will be reflected to the product price. The specialists make requests on the product from user's point of view are important, but increase in specialists as professionals for product

Shear joint capability versus bolt clearance

NASA Technical Reports Server (NTRS)

Lee, H. M.

1992-01-01

The results of a conservative analysis approach into the determination of shear joint strength capability for typical space-flight hardware as a function of the bolt-hole clearance specified in the design are presented. These joints are comprised of high-strength steel fasteners and abutments constructed of aluminum alloys familiar to the aerospace industry. A general analytical expression was first arrived at which relates bolt-hole clearance to the bolt shear load required to place all joint fasteners into a shear transferring position. Extension of this work allowed the analytical development of joint load capability as a function of the number of fasteners, shear strength of the bolt, bolt-hole clearance, and the desired factor of safety. Analysis results clearly indicate that a typical space-flight hardware joint can withstand significant loading when less than ideal bolt hole clearances are used in the design.

Productive Tension in Joint Planning: A Constructivist Model

DTIC Science & Technology

2007-11-06

Habits of Highly Effective People . Provo, UT: Covey Leadership Center. “Department of Defense Dictionary of Military and Associated Terms.” Joint...Amicus Curiae in Support of Lee Bolinger.” U.S. Supreme Court document No. 02-241, 02-516. 19 February 2003. Covey, Stephen. (1997) The 7

A need for planned adaptation to climate change in the wine industry

NASA Astrophysics Data System (ADS)

Metzger, Marc J.; Rounsevell, Mark D. A.

2011-09-01

The diversity of wine production depends on subtle differences in microclimate and is therefore especially sensitive to climate change. A warmer climate will impact directly on wine-grapes through over-ripening, drying out, rising acidity levels, and greater vulnerability to pests and disease, resulting in changes in wine quality (e.g. complexity, balance and structure) or potentially the style of wine that can be produced. The growing scientific evidence for significant climate change in the coming decades means that adaptation will be of critical importance to the multi-billion dollar global wine-industry in general, and to quality wine producers in particular (White et al 2006, 2009; Hertsgaard 2011). Adaptation is understood as an adjustment in natural or human systems in response to actual or expected environmental change, which moderates harm or exploits beneficial opportunities (IPCC 2007). Autonomous adaptation has been an integral part of the 20th century wine industry. Technological advances, changes in consumer demand, and global competition have meant that growers and producers have had to adapt to stay in business. The gradual temperature rise in the 20th Century (0.7 °C globally) has been accommodated successfully by gradual changes in vine management, technological measures, production control, and marketing (White et al 2009), although this has in many cases resulted in the production of bolder, more alcoholic wines (Hertsgaard 2011). In spite of this success, the wine industry is surprisingly conservative when it comes to considering longer term planned adaptation for substantial climate change impacts. A few producers are expanding to new locations at higher altitudes or cooler climates (e.g. Torres is developing new vineyards high in the Pyrenees, and Mouton Rothschild is setting up new vineyards in South America), and the legal and cultural restrictions of Appelation d'Origine Cȏntrollée (AOC) systems are being discussed (White et al 2009

NASA's commercial research plans and opportunities

NASA Technical Reports Server (NTRS)

Arnold, Ray J.

1992-01-01

One of the primary goals of the National Aeronautics and Space Administration's (NASA) commercial space development plan is to encourage the development of space-based products and markets, along with the infrastructure and transportation that will support those products and markets. A three phased program has been instituted to carry out this program. The first phase utilizes government grants through the Centers for the Commercial Development of Space (CCDS) for space-related, industry driven research; the development of a technology data base; and the development of commercial space transportation and infrastructure. The second phase includes the development of these technologies by industry for new commercial markets, and features unique industry/government collaborations such as Joint Endeavor Agreements. The final phase will feature technical applications actually brought to the marketplace. The government's role will be to support industry required infrastructure to encourage start-up markets and industries through follow-on development agreements such as the Space Systems Development Agreement. The Office of Commercial Programs has an aggressive flight program underway on the Space Shuttle, suborbital rockets, orbital expendable launch vehicles, and the Commercial Middeck Accommodation Module with SPACEHAB Inc. The Office of Commercial Program's has been allocated 35 percent of the U.S. share of the Space Station Freedom resources for 1997 utilization. A utilization plan has been developed with the Centers for the Commercial Development of Space and has identified eleven materials processing and biotechnology payloads occupying 5 double racks in the pressurized module as well as two payloads external to the module in materials exposure and environment monitoring. The Office of Commercial Programs will rely on the Space Station Freedom to provide the long duration laboratory component for space-based commercial research.

NASA's commercial research plans and opportunities

NASA Astrophysics Data System (ADS)

Arnold, Ray J.

One of the primary goals of the National Aeronautics and Space Administration's (NASA) commercial space development plan is to encourage the development of space-based products and markets, along with the infrastructure and transportation that will support those products and markets. A three phased program has been instituted to carry out this program. The first phase utilizes government grants through the Centers for the Commercial Development of Space (CCDS) for space-related, industry driven research; the development of a technology data base; and the development of commercial space transportation and infrastructure. The second phase includes the development of these technologies by industry for new commercial markets, and features unique industry/government collaborations such as Joint Endeavor Agreements. The final phase will feature technical applications actually brought to the marketplace. The government's role will be to support industry required infrastructure to encourage start-up markets and industries through follow-on development agreements such as the Space Systems Development Agreement. The Office of Commercial Programs has an aggressive flight program underway on the Space Shuttle, suborbital rockets, orbital expendable launch vehicles, and the Commercial Middeck Accommodation Module with SPACEHAB Inc. The Office of Commercial Program's has been allocated 35 percent of the U.S. share of the Space Station Freedom resources for 1997 utilization. A utilization plan has been developed with the Centers for the Commercial Development of Space and has identified eleven materials processing and biotechnology payloads occupying 5 double racks in the pressurized module as well as two payloads external to the module in materials exposure and environment monitoring. The Office of Commercial Programs will rely on the Space Station Freedom to provide the long duration laboratory component for space-based commercial research.

Utah ITS/CVO business plan : using technology to maximize highway safety and improve government and industry productivity

DOT National Transportation Integrated Search

1997-12-31

This plan was produced to maximize highway safety and increase government and industry productivity through the application of Intelligent Transportation System/Commercial Vehicle Operations (ITS/CVO) technologies to support regulatory and enforcemen...

Economics of technological change - A joint model for the aircraft and airline industries

NASA Technical Reports Server (NTRS)

Kneafsey, J. T.; Taneja, N. K.

1981-01-01

The principal focus of this econometric model is on the process of technological change in the U.S. aircraft manufacturing and airline industries. The problem of predicting the rate of introduction of current technology aircraft into an airline's fleet during the period of research, development, and construction for new technology aircraft arises in planning aeronautical research investments. The approach in this model is a statistical one. It attempts to identify major factors that influence transport aircraft manufacturers and airlines, and to correlate them with the patterns of delivery of new aircraft to the domestic trunk carriers. The functional form of the model has been derived from several earlier econometric models on the economics of innovation, acquisition, and technological change.

Perspectives and Plans for Graduate Studies. 11. Engineering 1974. E. Industrial Engineering and Systems Design. Report No. 74-22.

ERIC Educational Resources Information Center

Ontario Council on Graduate Studies, Toronto. Advisory Committee on Academic Planning.

On the instruction of the Council of Ontario Universities, the Advisory Committee on Academic Planning in cooperation with the Committee of Ontario Deans of Engineering has conducted a planning assessment for doctoral work in industrial engineering and systems design. Recommendations for doctoral work in engineering studies are presented.…

The next 25 years: Industrialization of space - Rationale for planning

NASA Technical Reports Server (NTRS)

Von Puttkamer, J.

1977-01-01

A methodology for planning the industralization of space is discussed. The suggested approach combines the extrapolative ('push') approach, in which alternative futures are projected on the basis of past and current trends and tendencies, with the normative ('pull') view, in which an ideal state in the far future is postulated and policies and decisions are directed toward its attainment. Time-reversed vectors of the future are tied to extrapolated, trend-oriented vectors of the quasi-present to identify common plateaus or stepping stones in technological development. Important steps in the industrialization of space to attain the short-range goals of production of space-derived energy, goods and services and the long-range goal of space colonization are discussed.

Industry liaison section implementation plan

NASA Technical Reports Server (NTRS)

Lakowske, Stephen

1990-01-01

The Industry Liaison Section is a new function of the Army/NASA Aircrew-Aircraft Integration (AAAI) Program that is intended to bridge an existing gap between Government developers (including contractors) and outside organizations who are potential users of products and services developed by the AAAI Program. Currently in its sixth year, the Program is experiencing considerable pull from industry and other government organizations to disseminate products. Since the AAAI Program's charter is exploratory and research in nature, and satisfying proper dissemination requirements is in conflict with the rapid prototyping approach utilized by the design team, the AAAI Program has elected to create an Industry Liaison Section (ILS) to serve as the Program's technology transfer focal point. The process by which the ILS may be established, organized and managed is described, including the baseline organizational structure, duties, functions, authority, responsibilities, relations and policies and procedures relevant to the conduct of the ILS.

The effectiveness of risk management: an analysis of project risk planning across industries and countries.

PubMed

Zwikael, Ofer; Ahn, Mark

2011-01-01

This article examines the effectiveness of current risk management practices to reduce project risk using a multinational, multi-industry study across different scenarios and cultures. A survey was administered to 701 project managers, and their supervisors, in seven industries and three diverse countries (New Zealand, Israel, and Japan), in multiple languages during the 2002-2007 period. Results of this study show that project context--industry and country where a project is executed--significantly impacts perceived levels of project risk, and the intensity of risk management processes. Our findings also suggest that risk management moderates the relationship between risk level and project success. Specifically, we found that even moderate levels of risk management planning are sufficient to reduce the negative effect risk levels have on project success. © 2010 Society for Risk Analysis.

45 CFR 1355.35 - Program improvement plans.

Code of Federal Regulations, 2013 CFR

2013-10-01

... developed jointly by title IV-E agency and Federal staff in consultation with the review team; (ii) Identify... how the action steps in the plan build on and make progress over prior program improvement plans; (vii... evaluated jointly by the title IV-E agency and ACF, in collaboration with other members of the review team...

Customer satisfaction planning and industrial engineering move hospital towards in-house stockless program.

PubMed

Burton, R; Mauk, D

1993-03-01

By integrating customer satisfaction planning and industrial engineering techniques when examining internal costs and efficiencies, materiel managers are able to better realize what concepts will best meet their customers' needs. Defining your customer(s), applying industrial engineering techniques, completing work sampling studies, itemizing recommendations and benefits to each alternative, performing feasibility and cost-analysis matrixes and utilizing resources through productivity monitoring will get you on the right path toward selecting concepts to use. This article reviews the above procedures as they applied to one hospital's decision-making process to determine whether to incorporate a stockless inventory program. Through an analysis of customer demand, the hospital realized that stockless was the way to go, but not by outsourcing the function--the hospital incorporated an in-house stockless inventory program.

1994 Federal Radionavigation Plan

DOT National Transportation Integrated Search

1995-05-01

The Federal Radionavigation Plan (FRP) delineates policies and plans for radionavigation services provided by the U.S. Government : to ensure efficient use of resources and full protection of national interests. Developed jointly by the U.S. Departme...

1996 Federal radionavigation plan

DOT National Transportation Integrated Search

1997-07-01

The Federal Radionavigation Plan (FRP) delineates policies and plans for radionavigation services provided by the U.S. Government : to ensure efficient use of resources and full protection of national interests. Developed jointly by the U.S. Departme...

1994 Federal Radionavigation Plan

DOT National Transportation Integrated Search

1995-05-01

The Federal Radionavigation Plan (FRP) delineates policies and plans for radionavigation services provided by the U.S. Government to ensure efficient use of resources and full protection of national interests. Developed jointly by the U.S. Department...

Federal Radionavigation Plan, (1986)

DOT National Transportation Integrated Search

1986-01-01

The Federal Radionavigation Plan (FRP) delineates policies and plans for radionavigation services provided by the U.S. Government to ensure efficient use of resources and full protection of national interests. Developed jointly by the U.S. Department...

Space Weather Forecasting at the Joint Space Operations Center (JSpOC)

NASA Astrophysics Data System (ADS)

Nava, O.

2012-12-01

The Joint Space Operations Center (JSpOC) at Vandenberg Air Force Base is the command and control focal point for the operational employment of worldwide joint space forces. The JSpOC focuses on planning and executing US Strategic Command's Joint Functional Component Command for Space (JFCC SPACE) mission. Through the JSpOC, the Weather Specialty Team (WST) monitors space and terrestrial weather effects, plans and assesses weather impacts on military operations, and provides reach-back support for deployed theater solar and terrestrial needs. This presentation will detail how space weather affects the JSpOC mission set and how the scientific community can enhance the WST's capabilities and effectiveness.

Joint Command and Control of Cyber Operations: The Joint Force Cyber Component Command (JFCCC)

DTIC Science & Technology

2012-05-04

relies so heavily on complex command and control systems and interconnectivity in general, cyber warfare has become a serious topic of interest at the...defensive cyber warfare into current and future operations and plans. In particular, Joint Task Force (JTF) Commanders must develop an optimum method to

Regional risk assessment approaches to land planning for industrial polluted areas in China: the Hulunbeier region case study.

PubMed

Li, Daiqing; Zhang, Chen; Pizzol, Lisa; Critto, Andrea; Zhang, Haibo; Lv, Shihai; Marcomini, Antonio

2014-04-01

The rapid industrial development and urbanization processes that occurred in China over the past 30years has increased dramatically the consumption of natural resources and raw materials, thus exacerbating the human pressure on environmental ecosystems. In result, large scale environmental pollution of soil, natural waters and urban air were recorded. The development of effective industrial planning to support regional sustainable economy development has become an issue of serious concern for local authorities which need to select safe sites for new industrial settlements (i.e. industrial plants) according to assessment approaches considering cumulative impacts, synergistic pollution effects and risks of accidental releases. In order to support decision makers in the development of efficient and effective regional land-use plans encompassing the identification of suitable areas for new industrial settlements and areas in need of intervention measures, this study provides a spatial regional risk assessment methodology which integrates relative risk assessment (RRA) and socio-economic assessment (SEA) and makes use of spatial analysis (GIS) methodologies and multicriteria decision analysis (MCDA) techniques. The proposed methodology was applied to the Chinese region of Hulunbeier which is located in eastern Inner Mongolia Autonomous Region, adjacent to the Republic of Mongolia. The application results demonstrated the effectiveness of the proposed methodology in the identification of the most hazardous and risky industrial settlements, the most vulnerable regional receptors and the regional districts which resulted to be the most relevant for intervention measures since they are characterized by high regional risk and excellent socio-economic development conditions. Copyright © 2013 Elsevier Ltd. All rights reserved.

Kinematics of Hooke universal joint robot wrists

NASA Technical Reports Server (NTRS)

Mckinney, William S., Jr.

1988-01-01

The singularity problem associated with wrist mechanisms commonly found on industrial manipulators can be alleviated by redesigning the wrist so that it functions as a three-axis gimbal system. This paper discussess the kinematics of gimbal robot wrists made of one and two Hooke universal joints. Derivations of the resolved rate motion control equations for the single and double Hooke universal joint wrists are presented using the three-axis gimbal system as a theoretical wrist model.

Cost Minimization for Joint Energy Management and Production Scheduling Using Particle Swarm Optimization

NASA Astrophysics Data System (ADS)

Shah, Rahul H.

Production costs account for the largest share of the overall cost of manufacturing facilities. With the U.S. industrial sector becoming more and more competitive, manufacturers are looking for more cost and resource efficient working practices. Operations management and production planning have shown their capability to dramatically reduce manufacturing costs and increase system robustness. When implementing operations related decision making and planning, two fields that have shown to be most effective are maintenance and energy. Unfortunately, the current research that integrates both is limited. Additionally, these studies fail to consider parameter domains and optimization on joint energy and maintenance driven production planning. Accordingly, production planning methodology that considers maintenance and energy is investigated. Two models are presented to achieve well-rounded operating strategy. The first is a joint energy and maintenance production scheduling model. The second is a cost per part model considering maintenance, energy, and production. The proposed methodology will involve a Time-of-Use electricity demand response program, buffer and holding capacity, station reliability, production rate, station rated power, and more. In practice, the scheduling problem can be used to determine a joint energy, maintenance, and production schedule. Meanwhile, the cost per part model can be used to: (1) test the sensitivity of the obtained optimal production schedule and its corresponding savings by varying key production system parameters; and (2) to determine optimal system parameter combinations when using the joint energy, maintenance, and production planning model. Additionally, a factor analysis on the system parameters is conducted and the corresponding performance of the production schedule under variable parameter conditions, is evaluated. Also, parameter optimization guidelines that incorporate maintenance and energy parameter decision making in the

Increasing the marketability and recognition of provider network joint ventures.

PubMed

Sjobeck, S J

1998-08-01

Physicians have been developing provider network joint ventures to market their services jointly to managed care plans, employers, and other purchasers. Over the past few years, external market factors have produced a growing impact on these joint ventures. These external market factors include the Federal government's revised antitrust guidelines, National Committee for Quality Assurance activities, and state and Federal consumer protection laws. Simply responding to these forces may not increase a provider network's marketability unless the network can demonstrate its value in the terms and measurements accepted by the consumer, managed care plans, and provider networks. By doing so, a provider network can not only increase its marketability, but also increase its recognition in the market, improve its competitive advantage, and enhance its return on investment.

A New Technique for Compensating Joint Limits in a Robot Manipulator

NASA Technical Reports Server (NTRS)

Litt, Jonathan; Hickman, Andre; Guo, Ten-Huei

1996-01-01

A new robust, optimal, adaptive technique for compensating rate and position limits in the joints of a six degree-of-freedom elbow manipulator is presented. In this new algorithm, the unmet demand as a result of actuator saturation is redistributed among the remaining unsaturated joints. The scheme is used to compensate for inadequate path planning, problems such as joint limiting, joint freezing, or even obstacle avoidance, where a desired position and orientation are not attainable due to an unrealizable joint command. Once a joint encounters a limit, supplemental commands are sent to other joints to best track, according to a selected criterion, the desired trajectory.

CLEANER-Hydrologic Observatory Joint Science Plan

NASA Astrophysics Data System (ADS)

Welty, C.; Dressler, K.; Hooper, R.

2005-12-01

modeling and decision-support tools to predict the underlying processes or subsequently forecast the effects of different management strategies. Water is a critical driver for the functioning of all ecosystems and development of human society, and it is a key ingredient for the success of industry, agriculture and, national economy. CLEANER-Hydrologic Observatories will foster cutting-edge science and engineering research that addresses major national needs (public and governmental) related to water and include, for example: (i) water resource problems, such as impaired surface waters, contaminated ground water, water availability for human use and ecosystem needs, floods and floodplain management, urban storm water, agricultural runoff, and coastal hypoxia; (ii) understanding environmental impacts on public health; (iii) achieving a balance of economic and environmental sustainability; (iv) reversing environmental degradation; and (v) protecting against chemical and biological threats. CLEANER (Collaborative Large-scale Engineering Analysis Network for Environmental Research) is an ENG initiative; the Hydrologic Observatory Network is GEO initiative through CUAHSI (Consortium of Universities for the Advancement of Hydrologic Science, Inc.). The two initiatives were merged into a joint, bi-directorate program in December 2004.

Apollo Soyuz mission planning and operations

NASA Technical Reports Server (NTRS)

Frank, M. P., III

1976-01-01

The paper describes the Apollo Soyuz project from the points of view of working group organization, mission plan definition, joint operations concept, and mission preparation. The concept for joint operations considered contingency situations as well as nominal operations. Preparations for the joint flight included cooperative tracking tests and combined training of the flight crews and mission control personnel.

A model to explain joint patterns found in ignimbrite deposits

NASA Astrophysics Data System (ADS)

Tibaldi, A.; Bonali, F. L.

2018-03-01

The study of fracture systems is of paramount importance for economic applications, such as CO2 storage in rock successions, geothermal and hydrocarbon exploration and exploitation, and also for a better knowledge of seismogenic fault formation. Understanding the origin of joints can be useful for tectonic studies and for a geotechnical characterisation of rock masses. Here, we illustrate a joint pattern discovered in ignimbrite deposits of South America, which can be confused with conjugate tectonic joint sets but which have another origin. The pattern is probably common, but recognisable only in plan view and before tectonic deformation obscures and overprints it. Key sites have been mostly studied by field surveys in Bolivia and Chile. The pattern is represented by hundreds-of-meters up to kilometre-long swarms of master joints, which show circular to semi-circular geometries and intersections that have "X" and "Y" patterns. Inside each swarm, joints are systematic, rectilinear or curvilinear in plan view, and as much as 900 m long. In section view, they are from sub-vertical to vertical and do not affect the underlying deposits. Joints with different orientation mostly interrupt each other, suggesting they have the same age. This joint architecture is here interpreted as resulting from differential contraction after emplacement of the ignimbrite deposit above a complex topography. The set of the joint pattern that has suitable orientation with respect to tectonic stresses may act to nucleate faults.

Joint Test Report for Validation of Alternative Low-Emission Surface Preparation/Depainting Technologies for Structural Steel

NASA Technical Reports Server (NTRS)

Lewis, Pattie

2007-01-01

Headquarters National Aeronautics and Space Administration (NASA) chartered the NASA Acquisition Pollution Prevention (AP2) Office to coordinate agency activities affecting pollution prevention issues identified during system and component acquisition and sustainment processes. The primary objectives of the AP2 Office are to: (1) Reduce or eliminate the use of hazardous materials or hazardous processes at manufacturing, remanufacturing, and sustainment locations. (2) Avoid duplication of effort in actions required to reduce or eliminate hazardous materials through joint center cooperation and technology sharing. The objective of this project was to qualify candidate alternative Low-Emission Surface Preparation/Depainting Technologies for Structural Steel applications at NASA facilities. This project compares the surface preparation/depainting performance of the proposed alternatives to existing surface preparation/depainting systems or standards. This Joint Test Report (JTR) contains the results of testing as per the outlines of the Joint Test Protocol (JTP), Joint Test Protocol for Validation of Alternative Low-Emission Surface Preparation/Depainting Technologies for Structural Steel, and the Field Test Plan (FTP), Field Evaluations Test Plan for Validation of Alternative Low-Emission Surface Preparation/Depainting Technologies for Structural Steel, for critical requirements and tests necessary to qualify alternatives for coating removal systems. These tests were derived from engineering, performance, and operational impact (supportability) requirements defined by a consensus of government and industry participants. This JTR documents the results of the testing as well as any test modifications made during the execution of the project. This JTR is made available as a reference for future pollution prevention endeavors by other NASA Centers, the Department of Defense and commercial users to minimize duplication of effort. The current coating removal processes

Controlling Distributed Planning

NASA Technical Reports Server (NTRS)

Clement, Bradley; Barrett, Anthony

2004-01-01

A system of software implements an extended version of an approach, denoted shared activity coordination (SHAC), to the interleaving of planning and the exchange of plan information among organizations devoted to different missions that normally communicate infrequently except that they need to collaborate on joint activities and/or the use of shared resources. SHAC enables the planning and scheduling systems of the organizations to coordinate by resolving conflicts while optimizing local planning solutions. The present software provides a framework for modeling and executing communication protocols for SHAC. Shared activities are represented in each interacting planning system to establish consensus on joint activities or to inform the other systems of consumption of a common resource or a change in a shared state. The representations of shared activities are extended to include information on (1) the role(s) of each participant, (2) permissions (defined as specifications of which participant controls what aspects of shared activities and scheduling thereof), and (3) constraints on the parameters of shared activities. Also defined in the software are protocols for changing roles, permissions, and constraints during the course of coordination and execution.

Joint Planning and Development Office Work Plan FY10

DTIC Science & Technology

2010-01-01

IPSA ) Division will make refinements to the NextGen Portfolio Analysis. In addition, IPSA will work with the Department of Defense (DoD) to define and...Submitted Interagency Portfolio and Systems Analysis ( IPSA ) DRAFT DoD Portfolio Analysis Criteria BASELINE DoD Portfolio Analysis Criteria DRAFT...WG Work Plan Review Prototype Capability Selected and Defined CHAs Complete Safety Metrics for IPSA Complete FINAL Prototype Report FINAL

40 CFR 300.205 - Planning and coordination structure.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 29 2013-07-01 2013-07-01 false Planning and coordination structure... POLLUTION CONTINGENCY PLAN Planning and Preparedness § 300.205 Planning and coordination structure. (a... assure pre-planning of joint response efforts, including appropriate procedures for mechanical recovery...

40 CFR 300.205 - Planning and coordination structure.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 28 2014-07-01 2014-07-01 false Planning and coordination structure... POLLUTION CONTINGENCY PLAN Planning and Preparedness § 300.205 Planning and coordination structure. (a... assure pre-planning of joint response efforts, including appropriate procedures for mechanical recovery...

40 CFR 300.205 - Planning and coordination structure.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 28 2011-07-01 2011-07-01 false Planning and coordination structure... POLLUTION CONTINGENCY PLAN Planning and Preparedness § 300.205 Planning and coordination structure. (a... assure pre-planning of joint response efforts, including appropriate procedures for mechanical recovery...

40 CFR 300.205 - Planning and coordination structure.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 29 2012-07-01 2012-07-01 false Planning and coordination structure... POLLUTION CONTINGENCY PLAN Planning and Preparedness § 300.205 Planning and coordination structure. (a... assure pre-planning of joint response efforts, including appropriate procedures for mechanical recovery...

Application of finite element analysis in pre-operative planning for deformity correction of abnormal hip joints--a case series.

PubMed

Rhyu, K H; Kim, Y H; Park, W M; Kim, K; Cho, T-J; Choi, I H

2011-09-01

In experimental and clinical research, it is difficult to directly measure responses in the human body, such as contact pressure and stress in a joint, but finite element analysis (FEA) enables the examination of in vivo responses by contact analysis. Hence, FEA is useful for pre-operative planning prior to orthopaedic surgeries, in order to gain insight into which surgical options will result in the best outcome. The present study develops a numerical simulation technique based on FEA to predict the surgical outcomes of osteotomy methods for the treatment of slipped capital femoral epiphyses. The correlation of biomechanical parameters including contact pressure and stress, for moderate and severe cases, is investigated. For severe slips, a base-of-neck osteotomy is thought to be the most reliable and effective surgical treatment, while any osteotomy may produce dramatic improvement for moderate slips. This technology of pre-operative planning using FEA can provide information regarding biomechanical parameters that might facilitate the selection of optimal osteotomy methods and corresponding surgical options.

75 FR 33613 - Notice of the Carbon Sequestration-Geothermal Energy-Science Joint Workshop

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-14

... Sequestration--Geothermal Energy--Science Joint Workshop AGENCY: Office of Energy Efficiency and Renewable Energy, DOE. ACTION: Notice of the Carbon Sequestration--Geothermal Energy--Science Joint Workshop... Carbon Storage and Geothermal Energy, June 15-16, 2010. Experts from industry, academia, national labs...

Command and Control for Joint Air Operations

DTIC Science & Technology

2010-01-12

systems, to include collaborative air planning tools such as the theater battle management core system ( TBMCS ). Operational level air planning occurs in...sight communications and data exchange equipment in order to respond to joint force requirements. For example, the TBMCS is often used. The use of ATO...generation and dissemination software portions of TBMCS has been standardized. This ATO feature allows the JAOC to be interoperable with other

Military Transformation and the Defense Industry After Next: The Defense Industrial Implications of Network-Centric Warfare

DTIC Science & Technology

2002-09-01

including suggestions for reducing this burden, to Washington Headquarters Services , Directorate for Information Operations and Reports, 1215 Jefferson...require the acquisition of unfamiliar weapons and support systems. Joint and service visions of the military after next raise serious questions that...and the U.S. Defense Industry The U.S. military is awash in visions of transformation. There is an array of joint and service visions of what has become

Joint Integration Office Independent Review Committee annual report, 1985

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Comprised of seven persons with extensive experience in the issues of nuclear waste, the Independent Review Committee (IRC) provides independent and objective review of Defense Transuranic Waste Program (DTWP) activities managed by the Joint Integration Office (JIO), formerly the Defense Transuranic Waste Lead Organization (TLO). The Committee is ensured a broad, interdisciplinary perspective since its membership includes representatives from the fields of nuclear engineering, nuclear waste transportation, industrial quality control, systems and environmental engineering and state and local government. The scope of IRC activities includes overall review of specific TLO plans, projects and activities, and technical review of particular researchmore » and development projects. The Committee makes specific suggestions and recommendations based upon expertise in the field of TRU Waste Management. The IRC operates as a consulting group, under an independent charter providing objective review of program activities. This report summarizes the 12 major topics reviewed by the committee during 1985.« less

Ultrasonic guided wave inspection of Inconel 625 brazed lap joints

NASA Astrophysics Data System (ADS)

Comot, Pierre; Bocher, Philippe; Belanger, Pierre

2016-04-01

The aerospace industry has been investigating the use of brazing for structural joints, as a mean of reducing cost and weight. There therefore is a need for a rapid, robust, and cost-effective non-destructive testing method for evaluating the structural integrity of the joints. The mechanical strength of brazed joints depends mainly on the amount of brittle phases in their microstructure. Ultrasonic guided waves offer the possibility of detecting brittle phases in joints using spatio-temporal measurements. Moreover, they offer the opportunity to inspect complex shape joints. This study focused on the development of a technique based on ultrasonic guided waves for the inspection of Inconel 625 lap joints brazed with BNi-2 filler metal. A finite element model of a lap joint was used to optimize the inspection parameters and assess the feasibility of detecting the amount of brittle phases in the joint. A finite element parametric study simulating the input signal shape, the center frequency, and the excitation direction was performed. The simulations showed that the ultrasonic guided wave energy transmitted through, and reflected from, the joints was proportional to the amount of brittle phases in the joint.

Dynamic analysis of clamp band joint system subjected to axial vibration

NASA Astrophysics Data System (ADS)

Qin, Z. Y.; Yan, S. Z.; Chu, F. L.

2010-10-01

Clamp band joints are commonly used for connecting circular components together in industry. Some of the systems jointed by clamp band are subjected to dynamic load. However, very little research on the dynamic characteristics for this kind of joint can be found in the literature. In this paper, a dynamic model for clamp band joint system is developed. Contact and frictional slip between the components are accommodated in this model. Nonlinear finite element analysis is conducted to identify the model parameters. Then static experiments are carried out on a scaled model of the clamp band joint to validate the joint model. Finally, the model is adopted to study the dynamic characteristics of the clamp band joint system subjected to axial harmonic excitation and the effects of the wedge angle of the clamp band joint and the preload on the response. The model proposed in this paper can represent the nonlinearity of the clamp band joint and be used conveniently to investigate the effects of the structural and loading parameters on the dynamic characteristics of this type of joint system.

Physical activity promotion in business and industry: evidence, context, and recommendations for a national plan.

PubMed

Pronk, Nicolaas P

2009-11-01

The contemporary workplace setting is in need of interventions that effectively promote higher levels of occupational and habitual physical activity. It is the purpose of this paper to outline an evidence-based approach to promote physical activity in the business and industry sector in support of a National Physical Activity Plan. Comprehensive literature searches identified systematic reviews, comprehensive reviews, and consensus documents on the impact of physical activity interventions in the business and industry sector. A framework for action and priority recommendations for practice and research were generated. Comprehensive, multicomponent work-site programs that include physical activity components generate significant improvements in health, reduce absenteeism and sick leave, and can generate a positive financial return. Specific evidence-based physical activity interventions are presented. Recommendations for practice include implementing comprehensive, multicomponent programs that make physical activity interventions possible, simple, rewarding and relevant in the context of a social-ecological model. The business and industry sector has significant opportunities to improve physical activity among employees, their dependents, and the community at-large and to reap important benefits related to worker health and business performance.

Physical Activity Promotion in Business and Industry: Evidence, Context, and Recommendations for a National Plan.

PubMed

Pronk, Nicolaas P

2009-11-01

The contemporary workplace setting is in need of interventions that effectively promote higher levels of occupational and habitual physical activity. It is the purpose of this paper to outline an evidence-based approach to promote physical activity in the business and industry sector in support of a National Physical Activity Plan. Comprehensive literature searches identified systematic reviews, comprehensive reviews, and consensus documents on the impact of physical activity interventions in the business and industry sector. A framework for action and priority recommendations for practice and research were generated. Comprehensive, multicomponent worksite programs that include physical activity components generate significant improvements in health, reduce absenteeism and sick leave, and can generate a positive financial return. Specific evidence-based physical activity interventions are presented. Recommendations for practice include implementing comprehensive, multicomponent programs that make physical activity interventions possible, simple, rewarding and relevant in the context of a social-ecological model. The business and industry sector has significant opportunities to improve physical activity among employees, their dependents, and the community at-large and to reap important benefits related to worker health and business performance.

Federal Radionavigation Plan. Vol. II. Requirements

DOT National Transportation Integrated Search

1980-07-01

The Federal Radionavigation Plan (FRP) has been jointly developed by the U.S. Departments of Defense and Transportation to ensure efficient use of resources and full protection of national interests. The plan sets forth the Federal interagency approa...

Strategic planning: health plan perspective.

PubMed

Mills, P S

1990-01-01

The managed care industry is one of the most dynamic industries in the health care business. The development of new products, formation of alliances, changes in legislation and other types of changes are regular occurrences. This kind of dynamic environment makes it more important than ever to use strategic planning to guide management decisions.

Joint Base Contracting: A Comparative Analysis of Joint Base Contracting Activities between Services

DTIC Science & Technology

2011-12-01

INTENTIONALLY LEFT BLANK 1 I. INTRODUCTION A. OVERVIEW The idea of consolidating functions is not new in the corporate world, nor is it new in...combining the experience and skill of multiple organizations to improve corporate knowledge. The automobile industry has several examples of joint...objective process, no more than half of the Commission’s professional staff members could have worked for the DoD during the same year that they were a

Publication planning 101.

PubMed

Sismondo, Sergio; Nicholson, Scott Howard

2009-01-01

Publication planning is the sub-industry to the pharmaceutical industry that does the organizational and practical work of shaping pharmaceutical companies' data and turning it into medical journal articles. Its main purpose is to create and communicate scientific information to support the marketing of products. This report is based mostly on information presented at the 2007 annual meeting of the International Society of Medical Planning Professionals, including a workshop entitled "Publication Planning 101/201", attended by one of us. We provide some analysis of the role of publication planning in medical publishing, and its implications for the structuring of medical knowledge.

Manufacturing Methods and Technology Program Plan. Update.

DTIC Science & Technology

1981-11-01

INDUSTRIAL BASE ENGINEERING ACTIVITY ROCK ISLAND. ILLINOIS 61299 82 INDEX PAGE I. INTRODUCTION The MMT Program Plan Update ........... 1 Industry Guide...obtained from that Plan, extra copies of which are available upon request from the Industrial Base Engineering Activity. Other sources for this data are...Major Subcommands (SUBMACOM’S). The SUBMACOM’S plan, formulate, budget, and execute individual projects. The Industrial Base Engineering Activity

Bridging the Technology Valley of Death in Joint Medical Development

DTIC Science & Technology

2015-11-01

Force lieutenant colonel, is the Air Force Medical Support Agency Advanced Development Liaison Field Engineer in Falls Church, Virginia. Prusaczyk is...Awareness, communication and coordination may be mini - mal among Service S&T and AD programs. Joint Transition Planning Process A Joint Transition...Human Proof of Phase III NDA/BLA ling Approval, Launch Concept*** Launch Review Program Initiation Materiel Technology Engineering & Production

DEFI Photonique: a French national training project for optics and photonics industry

NASA Astrophysics Data System (ADS)

Boéri, E.; Cormier, E.

2014-07-01

The French government supports a structuring project for French Photonics. This project name DEFI Photonique is carried by the CNOP (National Committee for Optics and Photonics) for a period of 5 years (2013-2017). One of the most important tasks is dedicated to training for industry, particularly SMEs. The project aims at elaborating a training offer based on the experience of PYLA, the Bordeaux training facility for Optics and Photonics, and create a national network throughout all the French Photonics clusters. The project plans to initiate, develop and coordinate training courses based on the players skills in the sector, in particular regional clusters, depending on their field of excellence. This deployment of training courses should enable a mesh structure both thematically and geographically. Collaborative work between training players in each pole, including joint actions, will facilitate access to training courses for companies, especially SMEs. A market survey is already being conducted in 2013 in photonics industry and application sectors. Implementation of actions involves all French photonics clusters as well as professional organizations. We will rely on the feedback we have with PYLA to show how training courses can be a strategic tool for development of technologies and industries. At this stage of the DEFI Photonique project we will be able to present the results of different analyses that have been conducted in key sectors and plans that will be implemented for the realization of the first actions.

Report of the Joint Accounting Group.

ERIC Educational Resources Information Center

Western Interstate Commission for Higher Education, Boulder, CO. National Center for Higher Education Management Systems.

The Joint Accounting Group (JAG) has as its primary goal to develop a capability to provide uniform transactional finance data at the institutional level. Such data should effectively meet the needs of public reporting, institutional financial management, and program planning. The group believes that the attainment of this goal requires uniformly…

Using the Integrated Vehicle Health Management Research Test and Integration Plan Wiki to Identify Synergistic Test Opportunities

NASA Technical Reports Server (NTRS)

Koelfgen, Syri J.; Faber, James J.

2010-01-01

The National Aeronautics and Space Administration (NASA) and the aviation industry have recognized a need for developing a method to identify and combine resources to carry out research and testing more efficiently. The Integrated Vehicle Health Management (IVHM) Research Test and Integration Plan (RTIP) Wiki is a tool that is used to visualize, plan, and accomplish collaborative research and testing. Synergistic test opportunities are developed using the RTIP Wiki, and include potential common resource testing that combines assets and personnel from NASA, industry, academia, and other government agencies. A research scenario is linked to the appropriate IVHM milestones and resources detailed in the wiki, reviewed by the research team members, and integrated into a collaborative test strategy. The scenario is then implemented by creating a test plan when appropriate and the research is performed. The benefits of performing collaborative research and testing are achieving higher Technology Readiness Level (TRL) test opportunities with little or no additional cost, improved quality of research, and increased communication among researchers. In addition to a description of the method of creating these joint research scenarios, examples of the successful development and implementation of cooperative research using the IVHM RTIP Wiki are given.

Federal Radionavigation Plan. Vol. II. Requirements.

DOT National Transportation Integrated Search

1982-03-01

The second edition of the Federal Radionavigation Plan (FRP) has been jointly developed by the U.S. Departments of Defense and Transportation to ensure efficient use of resources and full protection of national interests. The plan sets forth the Fede...

Planning and implementing forest operations to achieve sustainable forests: Proceedings of papers presented at the joint meeting of the Council on Forest Engineering and International Union of Forest Research Organizations.

Treesearch

Charles R. Blinn; Michael A. Thompson

1996-01-01

Contains a variety of papers presented at the joint meeting of the Council on Forest Engineering and International Union of Forest Research Organizations Subject Group S3.04 and that support the meeting theme "Planning and Implementing Forest Operations to Achieve Sustainable Forests."

Validation Report for Joint Medical Planning Tool (JMPT) Version 7.5.6 Medical Planning Tool

DTIC Science & Technology

2013-09-19

surgical 847.3 Sprain of sacrum Non-surgical 724.2 Lumbago Non-surgical 724.02 Spinal stenosis of lumbar region Non-surgical 681 Cellulitis and abscess... Cellulitis and abscess of face 682.6 Cellulitis and abscess of leg except foot 719.41 Pain in joint shoulder 11 JMPT Validation Report ICD-9 ICD-9

Petroleum industry in Iran

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farideh, A.

1981-01-01

This study examines the oil industry in Iran from the early discovery of oil nearly two hundred years ago in Mazandaran (north part) to the development of a giant modern industry in the twentieth century. Chapter I presents a brief historical setting to introduce the reader to the importance of oil in Iran. It focuses on the economic implications of the early oil concessions in the period 1901 to 1951. Chapter II discusses the nationalization of the Iranian oil industry and creation of NIOC in 1951 and the international political and economic implication of these activities. Chapter III explains themore » activities of NIOC in Iran. Exploration and drilling, production, exports, refineries, natural gas, petrochemicals and internal distributions are studied. Chapter IV discusses the role of the development planning of Iran. A brief presentation of the First Development Plan through the Fifth Development Plan is given. Sources and uses of funds by plan organization during these Five Plans is studied. The Iran and Iraq War is also studied briefly, but the uncertainty of its resolution prevents any close analysis of its impact on the Iranian oil industry. One conclusion, however, is certain; oil has been a vital resource in Iran's past and it will remain the lifetime of its economic development in the future.« less

Joint Exercise Program: DOD Needs to Take Steps to Improve the Quality of Funding Data

DTIC Science & Technology

2017-02-01

technology systems—the Joint Training Information Management System (JTIMS) and the Execution Management System—to manage the execution of the Joint...Exercise Program, but does not have assurance that funding execution data in the Execution Management System are reliable. JTIMS is the system of record...for the Joint Exercise Program that combatant commanders use to plan and manage their joint training exercises. GAO observed significant variation

Raiders of the Lost Art -- Recovering and Implementing the Intellectual Lineage of Campaign Planning for 21st Century Joint Planning

DTIC Science & Technology

2008-10-30

American billionaire and financier Warren Buffett , “is the enemy of good thinking.”42 And there is “bad terminology” spilling from the pages of JP...be productive and become a meaningless catch-all word? 42 Warren Buffett , Berkshire Hathaway, 2001...Harrisburg, PA: The Telegraph Press (1940). Buffett , Warren . Berkshire Hathaway, 2001 Annual Report. Chairman of the Joint Chiefs of Staff. Joint

Integrated Sustainable Planning for Industrial Region Using Geospatial Technology

NASA Astrophysics Data System (ADS)

Tiwari, Manish K.; Saxena, Aruna; Katare, Vivek

2012-07-01

The Geospatial techniques and its scope of applications have undergone an order of magnitude change since its advent and now it has been universally accepted as a most important and modern tool for mapping and monitoring of various natural resources as well as amenities and infrastructure. The huge and voluminous spatial database generated from various Remote Sensing platforms needs proper management like storage, retrieval, manipulation and analysis to extract desired information, which is beyond the capability of human brain. This is where the computer aided GIS technology came into existence. A GIS with major input from Remote Sensing satellites for the natural resource management applications must be able to handle the spatiotemporal data, supporting spatiotemporal quarries and other spatial operations. Software and the computer-based tools are designed to make things easier to the user and to improve the efficiency and quality of information processing tasks. The natural resources are a common heritage, which we have shared with the past generations, and our future generation will be inheriting these resources from us. Our greed for resource and our tremendous technological capacity to exploit them at a much larger scale has created a situation where we have started withdrawing from the future stocks. Bhopal capital region had attracted the attention of the planners from the beginning of the five-year plan strategy for Industrial development. However, a number of projects were carried out in the individual Districts (Bhopal, Rajgarh, Shajapur, Raisen, Sehore) which also gave fruitful results, but no serious efforts have been made to involve the entire region. No use of latest Geospatial technique (Remote Sensing, GIS, GPS) to prepare a well structured computerized data base without which it is very different to retrieve, analyze and compare the data for monitoring as well as for planning the developmental activities in future.

Grasp planning under uncertainty

NASA Technical Reports Server (NTRS)

Erkmen, A. M.; Stephanou, H. E.

1989-01-01

The planning of dexterous grasps for multifingered robot hands operating in uncertain environments is covered. A sensor-based approach to the planning of a reach path prior to grasping is first described. An on-line, joint space finger path planning algorithm for the enclose phase of grasping was then developed. The algorithm minimizes the impact momentum of the hand. It uses a Preshape Jacobian matrix to map task-level hand preshape requirements into kinematic constraints. A master slave scheme avoids inter-finger collisions and reduces the dimensionality of the planning problem.

Hybrid FSWeld-bonded joint fatigue behaviour

NASA Astrophysics Data System (ADS)

Lertora, Enrico; Mandolfino, Chiara; Gambaro, Carla; Pizzorni, Marco

2018-05-01

Aluminium alloys, widely used in aeronautics, are increasingly involved in the automotive industry due to the good relationship between mechanical strength and specific weight. The lightening of the structures is the first objective, which allows the decreasing in the weight in motion. The use of aluminium alloys has also seen the introduction of the Friction Stir Welding (FSW) technique for the production of structural overlapping joints. FSW allows us to weld overlap joints free from defects, but with the presence of a structural notch further aggravated by the presence of a "hook" defect near the edge of the weld. Furthermore, FSW presents a weld penetration area connected to the tool geometry and penetration. The experimental activity will be focused on the combination of two different joining techniques, which can synergistically improve the final joint resistance. In particular, the welding and bonding process most commonly known as weld-bonding is defined as a hybrid process, as it combines two different junction processes. In this paper we analyse FSWelded AA6082 aluminium alloy overlapped joint with the aim of quantitatively evaluating the improvement provided by the presence of an epoxy adhesive between the plates. After optimising the weld-bonding process, the mechanical behaviour of welded joints will be analysed by static and dynamic tests. The presence of the adhesive should limit the negative effect of the structural notch inevitable in a FSW overlapped joint.

The academic-industrial complex: navigating the translational and cultural divide.

PubMed

Freedman, Stephen; Mullane, Kevin

2017-07-01

In general, the fruits of academic discoveries can only be realized through joint efforts with industry. However, the poor reproducibility of much academic research has damaged credibility and jeopardized translational efforts that could benefit patients. Meanwhile, journals are rife with articles bemoaning the limited productivity and increasing costs of the biopharmaceutical industry and its resultant predilection for mergers and reorganizations while decreasing internal research efforts. The ensuing disarray and uncertainty has created tremendous opportunities for academia and industry to form even closer ties, and to embrace new operational and financial models to their joint benefit. This review article offers a personal perspective on the opportunities, models and approaches that harness the increased interface and growing interdependency between biomedical research institutes, the biopharmaceutical industry and the technological world. Copyright © 2017 Elsevier Ltd. All rights reserved.

Applying Quality Function Deployment in Industrial Design Curriculum Planning

ERIC Educational Resources Information Center

Liu, Shuo-Fang; Lee, Yann-Long; Lin, Yi-Zhi; Tseng, Chien-Feng

2013-01-01

Industrial design is a discipline that combines multiple professional fields. Enterprise demands for industrial design competencies also change over time; thus, the curriculum of industrial design education should be compatible with the current demands of the industry. However, scientific approaches have not been previously employed to plan…

National ITS Program Plan Executive Summary

DOT National Transportation Integrated Search

1995-03-01

THE PURPOSE OF THE NATIONAL ITS PROGRAM PLAN IS TO GUIDE THE DEVELOPMENT AND DEPLOYMENT OF INTELLIGENT TRANSPORTATION SYSTEMS (ITS) IN THE UNITED STATES. THIS FIRST EDITION OF THE PLAN WAS A JOINT EFFORT OF ITS AMERICA AND THE UNITED STATES DEPARTMEN...

A photovoltaic industry overview - The results of a survey on photovoltaic technology industrialization

NASA Technical Reports Server (NTRS)

Ferber, R. R.; Costogue, E. N.; Thornhill, J. W.; Shimada, K.

1981-01-01

The National Photovoltaics Program of the United States Department of Energy has the objective of bringing photovoltaic power systems to a point where they can supply a significant portion of the United States energy requirements by the year 2000. This is planned to be accomplished through substantial research and technology development activities aimed at achieving major cost reductions and market penetration. This paper presents information derived from a limited survey performed to obtain photovoltaic industry attitudes concerning industrialization, and to determine current industry plans to meet the DOE program goals. Silicon material production, a key photovoltaic manufacturing industry, is highlighted with regards to implementation of technology improvement and silicon material supply outlook.

Characterization of the groundwater aquifers at El Sadat City by joint inversion of VES and TEM data

NASA Astrophysics Data System (ADS)

Massoud, Usama; Kenawy, Abeer A.; Ragab, El-Said A.; Abbas, Abbas M.; El-Kosery, Heba M.

2014-12-01

Vertical Electrical Sounding (VES) and Transient ElectroMagnetic (TEM) survey have been applied for characterizing the groundwater aquifers at El Sadat industrial area. El-Sadat city is one of the most important industrial cities in Egypt. It has been constructed more than three decades ago at about 80 km northwest of Cairo along the Cairo-Alexandria desert road. Groundwater is the main source of water supplies required for domestic, municipal and industrial activities in this area due to the lack of surface water sources. So, it is important to maintain this vital resource in order to sustain the development plans of this city. In this study, VES and TEM data were identically measured at 24 stations along 3 profiles trending NE-SW with the elongation of the study area. The measuring points were arranged in a grid-like pattern with both inter-station spacing and line-line distance of about 2 km. After performing the necessary processing steps, the VES and TEM data sets were inverted individually to multi-layer models, followed by a joint inversion of both data sets. Joint inversion process has succeeded to overcome the model-equivalence problem encountered in the inversion of individual data set. Then, the joint models were used for the construction of a number of cross sections and contour maps showing the lateral and vertical distribution of the geoelectrical parameters in the subsurface medium. Interpretation of the obtained results and correlation with the available geological and hydrogeological information revealed TWO aquifer systems in the area. The shallow Pleistocene aquifer consists of sand and gravel saturated with fresh water and exhibits large thickness exceeding 200 m. The deep Pliocene aquifer is composed of clay and sand and shows low resistivity values. The water-bearing layer of the Pleistocene aquifer and the upper surface of Pliocene aquifer are continuous and no structural features have cut this continuity through the investigated area.

Development of energy consumption and energy efficiency potential in the Brazilian industrial sector according to the Integrated Energy Planning Model (IEPM)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tolmasquim, M.T.; Szklo, A.S.; Cohen, C.

This paper presents the development of energy consumption in the Brazilian industrial sector and energy efficiency potential based on the analysis undertaken through a model developed in the Energy Planning Program at COPPE/UFRJ, known as the Integrated Energy Planning Model (IEPM). The study starts by presenting the IEPM, which is a technical and economic parameter-based model designed to forecast energy supplies and consumption for all economic sectors in Brazil, within three scenarios. Outlines of all three scenarios are presented, as they were constructed according to certain specific assumptions. The industrial sector was broken down into eleven sub-sectors: food and beverages,more » ceramics, cement, iron and steel, mining and pelletizing, ferroalloys, non-ferrous metals and others (metallurgy), chemicals, pulp and paper, textiles and other industries (MME, 1998). All these sub-sectors will also be presented as well as the results of the scenario forecasts. Results deriving from these forecasts come from very specific studies that analyze all process steps in each sub-sector in order to propose energy replacements, efficiency improvements of structural production alterations that result in major potential energy consumption reductions. Last but not least, this paper gives the development forecasts deriving from the three scenarios over ten years, with their contributions to energy efficiency in the Brazilian industrial sector, showing that the authors can reduce energy consumption in the Brazilian industrial sector by: substituting less efficient processes by more efficient ones, through the conversion of final energy into usable energy, basically, in the cement and aluminum industries; replacing equipment and energy sources; modifying product mix of several industries (pulp and paper), assigning top priority to producing goods with higher added value that are less energy intensive, and, finally, reducing the share held by some energy intensive sectors in

Integration of Visual and Joint Information to Enable Linear Reaching Motions

NASA Astrophysics Data System (ADS)

Eberle, Henry; Nasuto, Slawomir J.; Hayashi, Yoshikatsu

2017-01-01

A new dynamics-driven control law was developed for a robot arm, based on the feedback control law which uses the linear transformation directly from work space to joint space. This was validated using a simulation of a two-joint planar robot arm and an optimisation algorithm was used to find the optimum matrix to generate straight trajectories of the end-effector in the work space. We found that this linear matrix can be decomposed into the rotation matrix representing the orientation of the goal direction and the joint relation matrix (MJRM) representing the joint response to errors in the Cartesian work space. The decomposition of the linear matrix indicates the separation of path planning in terms of the direction of the reaching motion and the synergies of joint coordination. Once the MJRM is numerically obtained, the feedfoward planning of reaching direction allows us to provide asymptotically stable, linear trajectories in the entire work space through rotational transformation, completely avoiding the use of inverse kinematics. Our dynamics-driven control law suggests an interesting framework for interpreting human reaching motion control alternative to the dominant inverse method based explanations, avoiding expensive computation of the inverse kinematics and the point-to-point control along the desired trajectories.

R&D Plan for RISMC Industry Application #1: ECCS/LOCA Cladding Acceptance Criteria

DOE Office of Scientific and Technical Information (OSTI.GOV)

Szilard, Ronaldo Henriques; Zhang, Hongbin; Epiney, Aaron Simon

The Nuclear Regulatory Commission (NRC) is finalizing a rulemaking change that would revise the requirements in 10 CFR 50.46. In the proposed new rulemaking, designated as 10 CFR 50.46c, the NRC proposes a fuel performance-based equivalent cladding reacted (ECR) criterion as a function of cladding hydrogen content before the accident (pre-transient) in order to include the effects of higher burnup on cladding performance as well as to address other technical issues. A loss of operational margin may result due to the more restrictive cladding embrittlement criteria. Initial and future compliance with the rule may significantly increase vendor workload and licenseemore » costs as a spectrum of fuel rod initial burnup states may need to be analyzed to demonstrate compliance. The Idaho National Laboratory (INL) has initiated a project, as part of the DOE Light Water Reactor Sustainability Program (LWRS), to develop analytical capabilities to support the industry in the transition to the new rule. This project is called the Industry Application 1 (IA1) within the Risk-Informed Safety Margin Characterization (RISMC) Pathway of LWRS. The general idea behind the initiative is the development of an Integrated Evaluation Model (IEM). The motivation is to develop a multiphysics framework to analyze how uncertainties are propagated across the stream of physical disciplines and data involved, as well as how risks are evaluated in a LOCA safety analysis as regulated under 10 CFR 50.46c. This IEM is called LOTUS which stands for LOCA Toolkit for US, and it represents the LWRS Program’s response to the proposed new rule making. The focus of this report is to complete an R&D plan to describe the demonstration of the LOCA/ECCS RISMC Industry Application # 1 using the advanced RISMC Toolkit and methodologies. This report includes the description and development plan for a RISMC LOCA tool that fully couples advanced MOOSE tools already in development in order to characterize and

[Key points of poverty alleviation of Chinese herbal medicine industry and classification of recommended Chinese herbal medicines].

PubMed

Huang, Lu-Qi; Su, Gang-Qiang; Zhang, Xiao-Bo; Sun, Xiao-Ming; Wu, Xiao-Jun; Guo, Lan-Ping; Li, Meng; Wang, Hui; Jing, Zhi-Xian

2017-11-01

To build a well-off society in an all-round way, eliminate poverty, improve people's livelihood and improve the level of social and economic development in poverty-stricken areas is the frontier issues of the government and science and technology workers at all levels. Chinese herbal medicine is the strategic resource of the people's livelihood, Chinese herbal medicine cultivation is an important part of China's rural poor population income. As most of the production of Chinese herbal medicine by the biological characteristics of their own and the interaction of natural ecological environment factors, showing a strong regional character.the Ministry of Traditional Chinese Medicine and the State Council Poverty Alleviation Office and other five departments jointly issued the "China Herbal Industry Poverty Alleviation Action Plan (2017-2020)", according to local conditions of guidance and planning of Chinese herbal medicine production practice, promote Chinese herbal medicine industry poverty alleviation related work In this paper, based on the relevant data of poverty-stricken areas, this paper divides the areas with priority to the poverty alleviation conditions of Chinese herbal medicine industry, and analyzes and catalogs the list of Chinese herbal medicines grown in poverty-stricken areas at the macro level. The results show that there are at least 10% of the poor counties in the counties where the poverty-stricken counties and the concentrated areas are concentrated in the poverty-stricken areas. There is already a good base of Chinese herbal medicine industry, which is the key priority area for poverty alleviation of Chinese herbal medicine industry. Poverty-stricken counties, with a certain degree of development of Chinese medicine industry poverty alleviation conditions, the need to strengthen the relevant work to expand the foundation and capacity of Chinese herbal medicine industry poverty alleviation; 37% of poor counties to develop Chinese medicine

40 CFR 300.205 - Planning and coordination structure.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) SUPERFUND, EMERGENCY PLANNING, AND COMMUNITY RIGHT-TO-KNOW PROGRAMS NATIONAL OIL AND HAZARDOUS SUBSTANCES... appropriate federal, state, and local officials to enhance the contingency planning of those officials and to assure pre-planning of joint response efforts, including appropriate procedures for mechanical recovery...

GRIPS Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1978-07-31

The GRIPS (Geothermal Resources Impact Projection Study) Commission was established by a Joint Powers Agreement between the California Counties of Lake, Mendocino, Napa, and Sonoma. The objectives of GRIPS are primarily to develop and use a cooperative environmental data collection and use system including natural, social, and economic considerations to facilitate their independent decisions and those of State and Federal agencies related to the environmental effects of geothermal development. This GRIPS Plan was prepared from a wide range of studies, workshops, and staff analyses. The plan is presented in four parts: summary and introduction; environmental data status report; planned programs;more » and budget. (MHR)« less

Industrial Sewing Classroom Delivery System. Teacher's Guide.

ERIC Educational Resources Information Center

South Carolina State Dept. of Education, Columbia. Office of Vocational Education.

This teacher's guide, consisting of a series of 12 lesson plans for use in teaching 20 self-paced learning modules, deals with industrial sewing. Covered in the individual lesson plans are the following topics: an orientation to industrial sewing; the history of industrial sewing; safety and hygiene in the laboratory and in the factory; machine…

Industrial Communications.

ERIC Educational Resources Information Center

Lindsay, Dan

Intended for seniors planning a career in industry as skilled laborers, this specialized course in Industrial Communications offers the student basic communications skills which he will need in his work and in his daily life. Since class activities center around short, factual oral reports, class size will be limited to 20, providing a maximum of…

Rewiring Warfighters for Joint Mindedness: Solutions for Joint Education in the 21st Century

DTIC Science & Technology

2010-06-01

begins " developing concepts to test the model or theory or plan for a forthcoming experience.൱ ELT provides a mechanism to reduce cognitive ...solving a lack of jointness requires a new way of thinking that focuses on developing cognitive symmetry among officers of different services... developing cognitive symmetry using P2C. Perception is the second P2C element. Creating cognitive symmetry through perception and not misperception

Joint-Use Libraries: More Bang for Your Bucks.

ERIC Educational Resources Information Center

Kinsey, Sally; Honig-Bear, Sharon

1994-01-01

Discussion of joint-use, or cooperative, libraries focuses on a partnership between public and school libraries in Nevada. Highlights include benefits in enhanced services, user needs, location of facilities, administration and planning, financial issues, facility maintenance, remodelling, and signage. (LRW)

Impact of tobacco industry and other corporations in the defeat of the 1994 Clinton health care plan.

PubMed

Givel, Michael

2017-06-21

The primary reason cited by many scholars for the defeat of the Clinton Administration's 1994 health care reform bill has long been identified as Health Insurance Association of America and National Federation of Independent Businesses opposition to the bill. Given this predominant consensus combined with sizeable proposed funding for the bill by a large tobacco product tax, this manuscript examined what the tobacco industry's role was in whole or part in defeating the Clinton health care bill. This research occurred through crosschecking internal tobacco industry documents and Clinton White House documents. Prior to the passage of the bill, the tobacco industry accepted a compromise of 45 cents per pack increase phased in over five years. Due to this compromise, the industry or third party allies had no role in the ultimate defeat in the bill. The primary reason for the bill's ultimate defeat was general business (but not tobacco industry and third party ally) opposition, the bill running out of time, and conflicting bills. Secondary reasons for the bill's defeat included issues with: employer mandates, high taxes on insurance plans, impacts on medical research and education, Congressional attention to other issues, election year politics, and possible future excise tax possibilities.

48 CFR 5152.208-9001 - Industrial preparedness planning.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Production Planning Schedules during active production of the item and for a period of (negotiated number... Government's dependence upon the Production Planning Schedules as a basis to take appropriate measures to... intention to convert Production Planning Schedule to contracts on a selective basis, as may be required to...

48 CFR 5152.208-9001 - Industrial preparedness planning.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Production Planning Schedules during active production of the item and for a period of (negotiated number... Government's dependence upon the Production Planning Schedules as a basis to take appropriate measures to... intention to convert Production Planning Schedule to contracts on a selective basis, as may be required to...

48 CFR 5152.208-9001 - Industrial preparedness planning.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Production Planning Schedules during active production of the item and for a period of (negotiated number... Government's dependence upon the Production Planning Schedules as a basis to take appropriate measures to... intention to convert Production Planning Schedule to contracts on a selective basis, as may be required to...

48 CFR 5152.208-9001 - Industrial preparedness planning.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Production Planning Schedules during active production of the item and for a period of (negotiated number... Government's dependence upon the Production Planning Schedules as a basis to take appropriate measures to... intention to convert Production Planning Schedule to contracts on a selective basis, as may be required to...

Ways to Improve Strategic Planning within the Tourist Industry (in the Case Study of the Republic of Kazakhstan)

ERIC Educational Resources Information Center

Shilibekova, Balzhan; Syzdykbayeva, Bakyt; Ayetov, Sayat; Agybetova, Rina; Baimbetova, Assel

2016-01-01

Kazakhstan has a great tourist potential, but it is still partly fulfilled. That is why very important to find the weakness in the state's policy and to develop this industry in the best way. The aim of the research is to formulate a hypothesis with regard to the possible content of measures to improve the strategic planning and marketing…

Duke University: Licensing and Real Estate Joint Ventures.

ERIC Educational Resources Information Center

McDonald, Eugene J.

1984-01-01

Joint ventures undertaken by Duke University with industry are reported that illustrate the imaginative arrangements and economic and otherwise advantageous structures possible in co-ventures. They include patent and trademark licensing, travel agency commissions, a racquetball and health club, a hotel, and an office building. (MSE)

Industrial minerals of the Midcontinent: Proceedings of the Midcontinent industrial minerals workshop

USGS Publications Warehouse

Bush, Alfred Lerner; Hayes, Timothy Scott; Bush, Alfred Lerner; Hayes, Timothy Scott

1995-01-01

The Midcontinent Industrial Minerals Workshop, in St. Louis, Missouri, September 16-17, 1991, was the fourth U.S. Geological Survey-sponsored meeting on the essential role of industrial rocks and minerals in the Nation's social and economic framework. The meeting was organized, supported, and the agenda was determined by a group from the USGS, the U.S. Bureau of Mines, and the State geological surveys of Arkansas, Illinois, Kansas, Kentucky, Missouri, Nebraska, and Oklahoma, with early assistance in planning from the Iowa and Tennessee surveys. As the major industrial rocks and minerals used in the nine-State area of the Midcontinent are construction materials, the Workshop focused on sand and gravel and limestone-dolomite resources and the extraction industry for those materials. Because active audience participation was considered vital, representatives from industry, universities, geological surveys, planning groups, regulatory agencies, and State legislatures were invited. The audience consisted of 87 attendees out of 120 invited participants (no legislators attended).

Low-Friction, Low-Profile, High-Moment Two-Axis Joint

NASA Technical Reports Server (NTRS)

Lewis, James L.; Le, Thang; Carroll, Monty B.

2010-01-01

friction during rotation. The diameter of the flange and the bearings can be increased to react higher loads and still maintain a compact surface mounting capability. This type of joint can be used in a wide variety of mechanisms and mechanical systems. It is especially effective where precise, smooth, continuous motion is required. For example, the joint can be used at the end of a linear actuator that is required to extend and rotate simultaneously. The current design application is for use in a spacecraft docking-system capture mechanism. Other applications might include industrial robotic or assembly line apparatuses, positioning systems, or in the motion-based simulator industry that employs complex, multi-axis manipulators for various types of motions.

Bird Habitat Conservation at Various Scales in the Atlantic Coast Joint Venture

Treesearch

Andrew Milliken; Craig Watson; Chuck Hayes

2005-01-01

The Atlantic Coast Joint Venture is a partnership focused on the conservation of habitats for migratory birds within the Atlantic Flyway/Atlantic Coast Region from Maine south to Puerto Rico. In order to be effective in planning and implementing conservation in this large and diverse area, the joint venture must work at multiple spatial scales, from the largest ?...

Synergistic Approach Integrating Joint Capabilities for USSOCOM Contingency Contracting: Construction Management Module

DTIC Science & Technology

2010-12-01

59 a. The Joint Uniform Lessons Learned System (JULLS) .........59 b. Acquisition Community Connection (ACC) ..........................59 c...Report ACC Acquisition Community Connection ADDIE Analyze, Design, Develop, Implement, Evaluate AFFARS Air Force Federal Acquisition Regulation...Operations J4 Logistics J5 Plans J6 Communications J8 Programming and Comptroller J&A Justification and Approval JARB Joint Acquisition

An evaluation of bridge deck joint sealing systems in Virginia.

DOT National Transportation Integrated Search

2003-01-01

The design and fabrication of bridge expansion joint (or movement) systems comprise a rapidly evolving industry. New designs are constantly being presented for trial, often on a piecemeal basis. Occasionally, failures of products occur without suffic...

Highway planning and operations for the Dallas district : freeway system plan methodology : summary

DOT National Transportation Integrated Search

1997-11-01

The System Planning Methodology was developed jointly by the Texas Department of Transportation (TxDOT), North Central Texas Council of Governments (NCTCOG), Dallas Area Rapid Transit (DART), and Texas Transportation Institute (TTI) as a transportati...

Model-centered approach to early planning and design of an eco-industrial park around an oil refinery.

PubMed

Zhang, Xiangping; Strømman, Anders H; Solli, Christian; Hertwich, Edgar G

2008-07-01

Industrial symbiosis promises environmental and economic gains through a utilization of the waste of some processes as a resource for other processes. Because of the costs and difficulties of transporting some wastes, the largest theoretical potential for industrial symbiosis is given when facilities are colocated in an eco-industrial park (EIP). This study proposes a model-centered approach with an eight-step procedure for the early planning and design of an eco-industrial park considering technical and environmental factors. Chemical process simulation software was used to model the energy and material flows among the prospective members and to quantify the benefits of integration among different firms in terms of energy and resources saved as compared to a reference situation. Process simulation was based on a combination of physical models of industrial processes and empirical models. The modeling allows for the development and evaluation of different collaboration opportunities and configurations. It also enables testing chosen configurations under hypothetical situations or external conditions. We present a case study around an existing oil and gas refinery in Mongstad, Norway. We used the approach to propose the colocation of a number of industrial facilities around the refinery, focused on integrating energy use among the facilities. An EIP with six main members was designed and simulated, matching new hypothetical members in size to the existing operations, modeling material and energy flows in the EIP, and assessing these in terms of carbon and hydrogen flows.

Paying for family planning.

PubMed

1998-09-12

Both houses of the US Congress have passed bills to require that all health plans for federal employees which pay for prescription medications also cover prescription contraceptives approved by the US Food and Drug Administration (USFDA). Of these, the five most commonly prescribed are contraceptive pills, implantable levonorgestrel (Norplant), long-acting injectable medroxyprogesterone acetate (Depo-provera), IUDs, and the diaphragm. Differences between the two bills are now being worked out by a joint House-Senate committee and passage seems almost certain. If a compromise joint bill is passed by both houses, it would cover plans which insure more than 1 million reproductive age women. However, the Equity in Prescription and Contraceptive Coverage (EPICC) Act requiring all US private health plans to cover contraceptive prescriptions is less certain to eventually become legislation. Currently, only 49% of traditional indemnity plans and 39% of health maintenance organizations cover the five most commonly prescribed reversible methods of contraception, while many health plans cover no form of contraception, other than sterilization. The passage of EPICC would expand contraceptive choice for another 45 million US women of childbearing age. Opposition to both bills has come mainly from health insurance and business groups, as well as conservative groups which oppose funding for family planning. Supporters of legislation to expand contraceptive choice for US women should understand that the right to reproductive health and contraceptive services extends beyond US borders, and pressure Congress to bolster US financial support for international population control programs.

Developmental Planning: An Introduction for Parents

ERIC Educational Resources Information Center

Noland, Jim

2009-01-01

"Developmental Planning" is the thinking process of using developmental milestones as a general basis for planning and predicting needs for the child within the early years. It considers the time frames associated with normal development across all facets of the child's development. The areas include bone and joint development, movement, sensory…

Exploring Computer Technology. The Illinois Plan for Industrial Education.

ERIC Educational Resources Information Center

Illinois State Univ., Normal.

This guide, which is one in the "Exploration" series of curriculum guides intended to assist junior high and middle school industrial educators in helping their students explore diverse industrial situations and technologies used in industry, deals with exploring computer technology. The following topics are covered in the individual…

Prosthetic elbow joint

NASA Technical Reports Server (NTRS)

Weddendorf, Bruce C. (Inventor)

1994-01-01

An artificial, manually positionable elbow joint for use in an upper extremity, above-elbow, prosthetic is described. The prosthesis provides a locking feature that is easily controlled by the wearer. The instant elbow joint is very strong and durable enough to withstand the repeated heavy loadings encountered by a wearer who works in an industrial, construction, farming, or similar environment. The elbow joint of the present invention comprises a turntable, a frame, a forearm, and a locking assembly. The frame generally includes a housing for the locking assembly and two protruding ears. The forearm includes an elongated beam having a cup-shaped cylindrical member at one end and a locking wheel having a plurality of holes along a circular arc on its other end with a central bore for pivotal attachment to the protruding ears of the frame. The locking assembly includes a collar having a central opening with a plurality of internal grooves, a plurality of internal cam members each having a chamfered surface at one end and a V-shaped slot at its other end; an elongated locking pin having a crown wheel with cam surfaces and locking lugs secured thereto; two coiled compression springs; and a flexible filament attached to one end of the elongated locking pin and extending from the locking assembly for extending and retracting the locking pin into the holes in the locking wheel to permit selective adjustment of the forearm relative to the frame. In use, the turntable is affixed to the upper arm part of the prosthetic in the conventional manner, and the cup-shaped cylindrical member on one end of the forearm is affixed to the forearm piece of the prosthetic in the conventional manner. The elbow joint is easily adjusted and locked between maximum flex and extended positions.

Crafting continuity and change in Saudi society: Joint parent-youth transition-to-adulthood projects.

PubMed

Khalifa, Hind; Alnuaim, Aziza A; Young, Richard A; Marshall, Sheila K; Popadiuk, Natalee

2018-02-01

Little is known about the transition to adulthood in traditional, developing countries such as Saudi Arabia. Previous research in other countries has revealed the importance of considering parents' support during the transition to adulthood. Thus, the purpose of this research was to examine how two generations negotiated the transition to adulthood. We asked the research question, What are the joint projects in which parents and youth plan and act on their plans for the youth's future? We used the action project method, an established qualitative approach, to answer these questions by observing the joint conversations of 14 parent and youth dyads. Our results provided evidence of an overarching higher level goal, or intentional framework, of crafting generational change and continuity within which participants' joint projects were embedded. Joint projects were organized into three groups: (a) negotiating educational and career futures, (b) promoting gender roles and marriage, and (c) shaping independence. Copyright © 2017 The Foundation for Professionals in Services for Adolescents. All rights reserved.

45 CFR 1355.35 - Program improvement plans.

Code of Federal Regulations, 2010 CFR

2010-10-01

... jointly by State and Federal staff in consultation with the review team; (ii) Identify the areas in which... be used to evaluate progress; (vi) Identify how the action steps in the plan build on and make... evaluated jointly by the State agency and ACF, in collaboration with other members of the review team, as...

Lesson Co-Planning: Joint Efforts, Shared Success

ERIC Educational Resources Information Center

Carreño, Laura; Hernandez Ortiz, Luz Stella

2017-01-01

The present article reports the results of a qualitative research study conducted at a higher education institution in Bogotá Colombia. The study aimed at examining the lesson planning practices conducted by English language teachers at the proficiency program of the institution. The participants were a mix of the mentors in charge of each level…

Flaw Tolerance in Lap Shear Brazed Joints. Part 1

NASA Technical Reports Server (NTRS)

Flom, Yury; Wang, Li-Qin

2003-01-01

Furnace brazing is a joining process used in the aerospace and other industries to produce strong permanent and hermetic structural joints. As in any joining process, brazed joints have various imperfections and defects. At the present time, our understanding of the influence of the internal defects on the strength of the brazed joints is not adequate. The goal of this 3-part investigation is to better understand the properties and failure mechanisms of the brazed joints containing defects. This study focuses on the behavior of the brazed lap shear joints because of their importance in manufacturing aerospace structures. In Part 1, an average shear strength capability and failure modes of the single lap joints are explored. Stainless steel specimens brazed with pure silver are tested in accordance with the AWS C3.2 standard. Comparison of the failure loads and the ultimate shear strength with the Finite Element Analysis (FEA) of the same specimens as a function of the overlap widths shows excellent correlation between the experimental and calculated values for the defect-free lap joints. A damage zone criterion is shown to work quite well in understanding the failure of the braze joints. In Part 2, the findings of the Part 1 will be verified on the larger test specimens. Also, various flaws will be introduced in the test specimens to simulate lack of braze coverage in the lap joints. Mechanical testing and FEA will be performed on these joints to verify that behavior of the flawed ductile lap joints is similar to joints with a reduced braze area. Finally, in Part 3, the results obtained in Parts 1 and 2 will be applied to the actual brazed structure to evaluate the load-carrying capability of a structural lap joint containing discontinuities. In addition, a simplified engineering procedure will be offered for the laboratory testing of the lap shear specimens.

Guidelines for Planning Industrial Education Facilities and Equipment.

ERIC Educational Resources Information Center

Stallsmith, Douglas D.

This guide presents alternatives, resources, and specifications for industrial education teachers to use in preparing a facilities proposal to present to administrators, boards of education, the community, and architects. Developed to reflect the objectives of industrial education as outlined in the "Wisconsin Guide to Local Curriculum…

40 CFR 62.3916 - Identification of Plan.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Existing Commercial and Industrial Solid Waste Incineration Units § 62.3916 Identification of Plan. (a... reference subpart III of 40 CFR part 62, the commercial and industrial solid waste incineration rule, which... plan applies to all applicable existing Commercial and Industrial Solid Waste Incineration Units for...

40 CFR 62.3916 - Identification of Plan.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Existing Commercial and Industrial Solid Waste Incineration Units § 62.3916 Identification of Plan. (a... reference subpart III of 40 CFR part 62, the commercial and industrial solid waste incineration rule, which... plan applies to all applicable existing Commercial and Industrial Solid Waste Incineration Units for...

Exploring Electricity/Electronics. The Illinois Plan for Industrial Education.

ERIC Educational Resources Information Center

Illinois State Univ., Normal.

This guide, which is one in the "Exploration" series of curriculum guides intended to assist junior high and middle school industrial educators in helping their students explore diverse industrial situations and technologies used in industry, deals with electricity and electronics. The following topics are covered in the individual lessons: the…

Opportunities for international collaboration in industrial pollution prevention

DOE Office of Scientific and Technical Information (OSTI.GOV)

Young, J.K.; Fowler, K.M.

1993-08-01

The goal of this paper is to describe international research opportunities for in-process reduction of wastes from industrial processes. Written responses from 52 researchers were obtained from 15 different countries in mid-1992. Each researcher provided information about products to reduce waste in industrial processes and recommended joint activities and mechanisms for working collaboratively with the United States.

Department of Industrial Health and Saftey Promotion: Curriculum Plan.

ERIC Educational Resources Information Center

Brody, Carmen

The industrial health and safety promotion curriculum described in this paper is intended for an industrial manufacturing plant employing approximately 10,000 people. The paper begins by describing the plant and the workers for which the curriculum was designed. Next, a rationale for having a Department of Industrial Health and Safety program…

Federal Radionavigation Plan. Volume III : Radionavigation System Characteristics

DOT National Transportation Integrated Search

1980-07-01

The Federal Radionavigation Plan (FRP) has been jointly developed by the U.S. Departments of Defense and Transportation to ensure efficient use of resources and full protection of national interests. The plan sets forth the Federal interagency approa...

14 CFR 151.111 - Advance planning proposals: General.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Engineering Proposals § 151.111 Advance planning proposals: General. (a) Each advance planning and engineering... application, under §§ 151.21(c) and 151.27, or both. (c) Each proposal must relate to planning and engineering... “Airport Activity Statistics of Certificated Route Air Carriers” (published jointly by FAA and the Civil...

The Future of Electricity Resource Planning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kahrl, Fredrich; Mills, Andrew; Lavin, Luke

Electricity resource planning is the process of identifying longer-term investments to meet electricity reliability requirements and public policy goals at a reasonable cost. Resource planning processes provide a forum for regulators, electric utilities, and electricity industry stakeholders to evaluate the economic, environmental, and social benefits and costs of different investment options. By facilitating a discussion on future goals, challenges and strategies, resource planning processes often play an important role in shaping utility business decisions. Resource planning emerged more than three decades ago in an era of transition, where declining electricity demand and rising costs spurred fundamental changes in electricity industrymore » regulation and structure. Despite significant changes in the industry, resource planning continues to play an important role in supporting investment decision making. Over the next two decades, the electricity industry will again undergo a period of transition, driven by technological change, shifting customer preferences and public policy goals. This transition will bring about a gradual paradigm shift in resource planning, requiring changes in scope, approaches and methods. Even as it changes, resource planning will continue to be a central feature of the electricity industry. Its functions — ensuring the reliability of high voltage (“bulk”) power systems, enabling oversight of regulated utilities and facilitating low-cost compliance with public policy goals — are likely to grow in importance as the electricity industry enters a new period of technological, economic and regulatory change. This report examines the future of electricity resource planning in the context of a changing electricity industry. The report examines emerging issues and evolving practices in five key areas that will shape the future of resource planning: (1) central-scale generation, (2) distributed generation, (3) demand-side resources, (4

Exploring Solar Energy. The Illinois Plan for Industrial Education.

ERIC Educational Resources Information Center

Illinois State Univ., Normal.

This packet is one in the "Exploration" series of curriculum materials developed for junior high and middle school industrial educators. The Exploration Series is intended to help them provide seventh- and eighth-grade students an opportunity to explore a wide range of industrial situations as well as some of the technologies used in the industry.…

Rotorcraft master plan

NASA Technical Reports Server (NTRS)

Hwoschinsky, Peter V.

1992-01-01

The Rotorcraft Master Plan contains a comprehensive summary of active and planned FAA vertical flight research and development. Since the Master Plan is not sufficient for tracking project status and monitoring progress, the Vertical Flight Program Plan will provide that capability. It will be consistent with the Master Plan and, in conjunction with it, will serve to ensure a hospitable environment if the industry presents a practical vertical-flight initiative.

Comprehensive Planning for Classification and Disposal of Solid Waste at the Industrial Parks regarding Health and Environmental Impacts

PubMed Central

Rahmani Samani, Bahareh

2014-01-01

The aim of this study is the comprehensive planning for integrated management of solid waste at the industrial parks. The share of each industrial group including food, metal, chemical, non-metallic minerals, textile, electrical and electronical, and cellulose industries were 48.2, 14.9, 6.7, 22, 0.9, 0.6, and 6.5 percent, respectively. The results showed that nearly half of total industrial waste produced from the range of biological materials are biodegradable and discharging them without observing environmental regulations leads to short-term pollution and nuisance in the acceptor environment. Also some parts of case study waste were recyclable which is considerable from viewpoint of economical and environmental pollution. Long-term impacts will appear due to improper site selection of disposal from the spatial standpoint. In this way, an approach for site selection using several socioeconomic, physical, and environmental criteria based on multicriteria decision making model (MCDM) is introduced. Health risks and environment pollution such as soil and surface water may be done. It is essential to revise the studied industries layout, particularly those units which produce special waste which should be more cautious. Also stricter enforcement is required as an effective step in reducing the harmful impacts of it. PMID:24688552

Comprehensive planning for classification and disposal of solid waste at the industrial parks regarding health and environmental impacts.

PubMed

Hashemi, Hassan; Pourzamani, Hamidreza; Rahmani Samani, Bahareh

2014-01-01

The aim of this study is the comprehensive planning for integrated management of solid waste at the industrial parks. The share of each industrial group including food, metal, chemical, non-metallic minerals, textile, electrical and electronical, and cellulose industries were 48.2, 14.9, 6.7, 22, 0.9, 0.6, and 6.5 percent, respectively. The results showed that nearly half of total industrial waste produced from the range of biological materials are biodegradable and discharging them without observing environmental regulations leads to short-term pollution and nuisance in the acceptor environment. Also some parts of case study waste were recyclable which is considerable from viewpoint of economical and environmental pollution. Long-term impacts will appear due to improper site selection of disposal from the spatial standpoint. In this way, an approach for site selection using several socioeconomic, physical, and environmental criteria based on multicriteria decision making model (MCDM) is introduced. Health risks and environment pollution such as soil and surface water may be done. It is essential to revise the studied industries layout, particularly those units which produce special waste which should be more cautious. Also stricter enforcement is required as an effective step in reducing the harmful impacts of it.

The Industrial Perspective

DTIC Science & Technology

1989-09-01

projections of planned construction, overhaul and repair work from both the public and commercial sectors can never sustain the industry at a level which...and other government organizations to support the Shipyard Recovery Plan and the revitalization of commercial shipbuilding in America. Expanding...engineer sitting next to the organization that does work package planning on ships and from the fleet. It won’t be, at least in these competitive firms

Skills Planning for Industry Growth: A Case Study of the Katherine Arts Industry. Occasional Paper

ERIC Educational Resources Information Center

Curry, Catherine

2009-01-01

The findings of a cultural industries skills audit undertaken in 2008 in Katherine, Northern Territory, are explored. The case study focusses in particular on the practical challenges and implications of auditing skills in a diverse industry sector and considers the usefulness of such an audit in preparing an industry for predicted change. This…

32 CFR 813.6 - Planning and requesting combat documentation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Joint Operation Planning and Execution System, that in turn, requests support from HQ AMC. HQ USAF can... 32 National Defense 6 2010-07-01 2010-07-01 false Planning and requesting combat documentation... SALES AND SERVICES VISUAL INFORMATION DOCUMENTATION PROGRAM § 813.6 Planning and requesting combat...

Development of Thermal Barriers For Solid Rocket Motor Nozzle Joints

NASA Technical Reports Server (NTRS)

Steinetz, Bruce M.; Dunlap, Patrick H., Jr.

2000-01-01

Joints in the Space Shuttle solid rocket motors are sealed by O-rings to contain combustion gases inside the rocket that reach pressures of up to 900 psi and temperatures of up to 5500 F. To provide protection for the O-rings, the motors are insulated with either phenolic or rubber insulation. Gaps in the joints leading up to the O-rings are filled with polysulfide joint-fill compounds as an additional level of protection. The current RSRM nozzle-to-case joint design incorporating primary, secondary, and wiper O-rings experiences gas paths through the joint-fill compound to the innermost wiper O-ring in about one out of every seven motors. Although this does not pose a safety hazard to the motor, it is an undesirable condition that NASA and rocket manufacturer Thiokol want to eliminate. Each nozzle-to-case joint gas path results in extensive reviews and evaluation before flights can be resumed. Thiokol and NASA Marshall are currently working to improve the nozzle-to-case joint design by implementing a more reliable J-leg design that has been used successfully in the field and igniter joint. They are also planning to incorporate the NASA Glenn braided carbon fiber thermal barrier into the joint. The thermal barrier would act as an additional level of protection for the O-rings and allow the elimination of the joint-fill compound from the joint.

EPA EMERGENCY PLANNING TOOLBOX

EPA Science Inventory

EPA's Office of Research and Development and Office of Water/Water Security Division have jointly developed a Response Protocol Toolbox (RPTB) to address the complex, multi-faceted challenges of a water utility's planning and response to intentional contamination of drinking wate...

Federal Radionavigation Plan. Volume III. Radionavigation System Characteristics

DOT National Transportation Integrated Search

1982-03-01

The second edition of the Federal Radionavigation Plan (FRP) has been jointly developed by the U.S. Departments of Defense and Transportation to ensure efficient use of resources and full protection of national interests. The plan sets forth the Fede...

Current situation and industrialization of Taiwan nanotechnology

NASA Astrophysics Data System (ADS)

Su, Hsin-Ning; Lee, Pei-Chun; Tsai, Min-Hua; Chien, Kuo-Ming

2007-12-01

Nanotechnology is projected to be a very promising field, and the impact of nanotechnology on society is increasingly significant as the research funding and manufactured goods increase exponentially. A clearer picture of Taiwan's current and future nanotechnology industry is an essential component for future planning. Therefore, this investigation studies the progress of industrializing nanotechnology in Taiwan by surveying 150 companies. Along with understanding Taiwan's current nanotechnology industrialization, this paper also suggests ways to promote Taiwan's nanotechnology. The survey results are summarized and serve as the basis for planning a nanotechnology industrialization strategy.

Space Station - Government and industry launch joint venture

NASA Astrophysics Data System (ADS)

Nichols, R. G.

1985-04-01

After the development of the space transportation system over the last decade, the decision to launch a permanently manned space station was announced by President Reagan in his 1984 State of the Union Address. As a result of work performed by the Space Station Task Force created in 1982, NASA was able to present Congress with a plan for achieving the President's objective. The plan envisions a space station which would cost about $8 billion and be operational as early as 1992. The functions of the Space Station would include the servicing of satellites. In addition, the station would serve as a base for the construction of large space structures, and provide facilities for research and development. The Space Station design selected by NASA is the 'Power Tower', a 450-foot-long truss structure which will travel in orbit with its main axis perpendicular to the earth's surface. Attention is given to the living and working quarters for the crew, the location of earth observation equipment and astronomical instruments, and details regarding the employment of the Station.

Industry and Schools as Partners.

ERIC Educational Resources Information Center

Cutietta, Robert A.

1997-01-01

Describes the Grammy in the Schools project that is a joint effort by the National Academy of Recording Arts & Sciences (NARAS) Foundation, Discover Card, and 15 major universities across the country. Expounds that music students are able to learn about a variety of career opportunities available in the music industry. (CMK)

Joint Chance-Constrained Dynamic Programming

NASA Technical Reports Server (NTRS)

Ono, Masahiro; Kuwata, Yoshiaki; Balaram, J. Bob

2012-01-01

This paper presents a novel dynamic programming algorithm with a joint chance constraint, which explicitly bounds the risk of failure in order to maintain the state within a specified feasible region. A joint chance constraint cannot be handled by existing constrained dynamic programming approaches since their application is limited to constraints in the same form as the cost function, that is, an expectation over a sum of one-stage costs. We overcome this challenge by reformulating the joint chance constraint into a constraint on an expectation over a sum of indicator functions, which can be incorporated into the cost function by dualizing the optimization problem. As a result, the primal variables can be optimized by a standard dynamic programming, while the dual variable is optimized by a root-finding algorithm that converges exponentially. Error bounds on the primal and dual objective values are rigorously derived. We demonstrate the algorithm on a path planning problem, as well as an optimal control problem for Mars entry, descent and landing. The simulations are conducted using a real terrain data of Mars, with four million discrete states at each time step.

Opportunities for the power industry in South Africa

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lynch, R.W.; Pinkney, C.; Feld, L.

1996-11-01

South Africa is a country in the midst of transformation. Political changes within the country, and the ensuing empowerment of the black majority, have created a situation where dramatic improvements are needed in the country`s infrastructure in order to enable it to meet the needs of all its people over the coming decades. Largely as a result of the international embargo placed on South Africa during the apartheid era, the South African government became heavily involved in the country`s energy sector. This involvement included development of a synfuels program, price controls in the oil sector, monopolies in both upstream andmore » downstream oil sectors, and a strong centralized electric power company. In 1994, South Africa became the eleventh member of the Southern Africa Development Community (SADC), an organization which was established in 1980 to synchronize development plans for its member countries. SADC is presently working to formulate a regional energy development plan, and coordinate technical information exchanges and joint research needs. Each of the SADC nations have also begun to develop their regional electricity grids and other parts of their energy infrastructure to plan for the growing needs of the 500 million people who live in sub-Saharan Africa. South Africa, in particular, must make significant changes in each of its energy sectors in the near future, to keep up with its growing energy requirements. These changes translate to opportunity for the US Power Industry.« less

2001 Federal Radionavigation Plan

DOT National Transportation Integrated Search

2002-03-19

The report is the official source of radio navigation policy and planning for the Federal Government and is required by the National Defense Authorization Act for Fiscal year 1998. It is prepared jointly by the Departments of Defense (DoD) and Transp...

A universal six-joint robot controller

NASA Technical Reports Server (NTRS)

Bihn, D. G.; Hsia, T. C.

1987-01-01

A general purpose six-axis robotic manipulator controller was designed and implemented to serve as a research tool for the investigation of the practical and theoretical aspects of various control strategies in robotics. A 80286-based Intel System 310 running the Xenix operating servo software as well as the higher level software (e.g., kinematics and path planning) were employed. A Multibus compatible interface board was designed and constructed to handle I/O signals from the robot manipulator's joint motors. From the design point of view, the universal controller is capable of driving robot manipulators equipped with D.C. joint motors and position optical encoders. To test its functionality, the controller is connected to the joint motor D.C. power amplifier of a PUMA 560 arm bypassing completely the manufacturer-supplied Unimation controller. A controller algorithm consisting of local PD control laws was written and installed into the Xenix operating system. Additional software drivers were implemented to allow application programs access to the interface board. All software was written in the C language.

An Analytical Evaluation of Contingency Contracting Operations in Iraq and Afghanistan: Capturing Critical Corporate Knowledge for the Future

DTIC Science & Technology

2012-12-01

Makeup for the CASO (After Deputy Assistant Secretary of Defense for Manufacturing and Industrial Base, n.d., p. 7) .......73  xiv Figure 26.  JCASO...Augmentation Program CAP Crisis Action Planning CASO Contingency Acquisition Support Office CBP Capability-Based Planning CCAS Contingency...enhance joint doctrine; 69  Develop and refine joint non-acquisition OCS training and education and ensure its inclusion in joint exercises;  Identify

National ITS Program Plan, Intelligent Transportation Systems, Synopsis

DOT National Transportation Integrated Search

THE PURPOSE OF THE NATIONAL ITS PROGRAM PLAN IS TO GUIDE THE DEVELOPMENT AND DEPLOYMENT OF INTELLIGENT TRANSPORTATION SYSTEMS (ITS) IN THE UNITED STATES. THIS, THE FIRST EDITION OF THE PLAN WAS A JOINT EFFORT OF ITS AMERICA AND THE UNITED STATES DEPA...

Reliability techniques in the petroleum industry

NASA Technical Reports Server (NTRS)

Williams, H. L.

1971-01-01

Quantitative reliability evaluation methods used in the Apollo Spacecraft Program are translated into petroleum industry requirements with emphasis on offsetting reliability demonstration costs and limited production runs. Described are the qualitative disciplines applicable, the definitions and criteria that accompany the disciplines, and the generic application of these disciplines to the chemical industry. The disciplines are then translated into proposed definitions and criteria for the industry, into a base-line reliability plan that includes these disciplines, and into application notes to aid in adapting the base-line plan to a specific operation.

75 FR 13643 - ITS Joint Program Office; Intelligent Transportation Systems Program Advisory Committee; Notice...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-22

... Advisory Committee; Notice of Meeting AGENCY: Research and Innovative Technology Administration, U.S... Plan; (5) Evolution of IntelliDrive\\SM\\; (6) ITS Strategic Research Plan, 2010-2014; (7) University... Technology Administration, ITS Joint Program Office, Attention: Stephen Glasscock, 1200 New Jersey Avenue, SE...

Laredo District Coahuila/Nuevo Leon/Tamaulipas border master plan : executive summary.

DOT National Transportation Integrated Search

2012-06-01

Border Master Plans, as defined and supported by the U.S./Mexico Joint Working : Committee on Transportation Planning and Programming, the Federal Highway Administration, : and the U.S. Department of State, are comprehensive long range plans to inven...

A Need to Know: The Role of Air Force Reconnaissance in War Planning, 1945-1953

DTIC Science & Technology

2004-02-01

a pro- found change in doctrine. In Joint Emergency War Plan Broiler , the JCS continued their reliance on strategic air war, but the doctrinal basis...com- pleted Joint Emergency War Plan Broiler , which resembled Pincher’s plans in some respects. The United States assumed an accidental outbreak of...theless, while Pincher reflected the Spaatz board assessment, Broiler relied heavily on atomic bombs. In other words, instead of a strategic campaign

Enhanced Planning Review of the San Francisco Metropolitan Area

DOT National Transportation Integrated Search

1996-07-01

FTA and FHWA have initiated a series of joint Enhanced Planning Reviews (EPRs) to assess the impact of the Intermodal Surface Transportation Efficiency Act of 1991 (ISTEA) on the planning processes conducted by the transportation agencies serving the...

The influence of joint technologies on ELV recyclability.

PubMed

Soo, Vi Kie; Compston, Paul; Doolan, Matthew

2017-10-01

Stricter vehicle emission legislation has led to the increasing use of lightweight materials and multi-material concepts to reduce the vehicle mass. To account for the complexity of multi-material vehicle designs, the choice of joining techniques used is becoming more diverse. Moreover, the different material combinations, and their respective joining methods play an important role in determining the potential of full material separation in a closed-loop system. This paper evaluates the types of joining technologies used in the automotive industry, and identifies those that hinder the sorting of ELV materials. The study is based on an industrial shredding trial of car doors. Observations from the case study showed that steel screws and bolts are increasingly used to combine different material types and are less likely to be perfectly liberated during the shredding process. The characteristics of joints that lead to impurities and valuable material losses, such as joint strength, material type, size, diameter, location, and protrusion level, can influence the material liberation in the current sorting practices and thus, lead to ELV waste minimisation. Additionally, the liberation of joints is also affected by the density and thickness of materials being joined. Correlation analyses are carried out to further support the influence of mechanical screws and bolts on material separation efficiencies. The observations are representative of the initial phases of current global ELV sorting practices. Copyright © 2017 Elsevier Ltd. All rights reserved.

Collapse of an industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Campbell, J.L.

1988-01-01

The author details the politics of nuclear energy in the U.S. and points out the advantages and disadvantages of various forms of industrial planning for this sector. He uses the nuclear industry as an example of how capitalism and democracy can be incompatible in some situations.

Critical Success Factors (CSFs) for Implementation of Enterprise Resource Planning (ERP) Systems in Various Industries, Including Institutions of Higher Education (IHEs)

ERIC Educational Resources Information Center

Debrosse-Bruno, Marie Michael

2017-01-01

Enterprise Resource Planning (ERP) systems present a management problem for various industries including institutions of higher education (IHEs) because they are costly to acquire, challenging to implement, and often fail to meet anticipated expectations. ERP systems are highly complex due to the nature of the operations they support. This…

Biomimetic materials in the utility industry: A program plan for research opportunities, volume 2. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Richman, R.H.; McNaughton, W.P.

1996-09-01

This report is the second of a two-volume set addressing the state-of-the-art and outlook for the application of biomimetic materials. The first volume examined achievements in mimicking novel aspects of biological systems in five broad categories: (1) Mimicking of Natural Material Designs, (2) Biomimetic Materials Processing, (3) Artificial Photosynthesis, (4) Biomimetic Molecular Electronics, and (5) Biomimetic Catalysis. Each topic was examined as to current activities and approaches, key aspects, unresolved issues, and implications for the power industry. Key researchers, their organizations, the main thrusts of investigation, achievements, and funding agencies were also summarized. This volume highlights opportunities for future researchmore » activities in biomimetics that could be valuable to the U.S. utility industry. Nineteen specific research projects have been identified. These opportunities are outlined in four classes: (1) technology awareness, (2) modeling and experimental studies, (3) state-of-the-art and outlook studies: developing experimental plans, and (4) concept feasibility studies.« less

False ankylosis of the temporomandibular joint in a cat. Correction by partial zygomatic arch resection.

PubMed

Larguier, L; Jamet, N

2015-01-01

To describe the use of two-dimensional computer-assisted tomography (CT) with three-dimensional (3D) reconstruction in the diagnosis and planning of surgical treatment of a case of false ankylosis of the temporomandibular joint. A young European Shorthaired cat was presented with the complaint of inability to eat and open its jaws. A CT scan with 3D reconstruction allowed visualization of the lesion which was causing extra-articular ankylosis of the temporomandibular joint. Surgery was performed to resect an osseous lesion of the zygomatic arch, thus freeing the temporomandibular joint. Postoperative physical therapy was initiated immediately following surgery, and then carried out by the owner with a one year follow-up. Clinical examination of the cat was performed during regular office visits (at 1 month and 3 months following surgery), which allowed objective assessment of postoperative recuperation. At the end of a year, the owners reported that the cat had maintained sufficient jaw opening without any signs consistent with chronic pain. Computed tomography scan with 3D reconstruction allowed planning of the surgical correction of extra-articular ankylosis of the temporomandibular joint, and in this case condylectomy was avoided, since temporomandibular joint range-of-motion was maintained.

Strategies for sustainable development of industrial park in Ulsan, South Korea--from spontaneous evolution to systematic expansion of industrial symbiosis.

PubMed

Park, Hung-Suck; Rene, Eldon R; Choi, Soo-Mi; Chiu, Anthony S F

2008-04-01

The Korea National Cleaner Production Center (KNCPC) affiliated to the Korea Institute of Industrial Technology (KITECH) has started a 15 year, 3-phase EIP master plan with the support of Ministry of Commerce, Industry, and Energy (MOCIE). A total of 6 industrial parks, including industrial parks in Ulsan city, known as the industrial capital of South Korea, are planning projects to find the feasibility of shifting existing industrial parks to eco-industrial parks. The basic survey shows that Ulsan industrial complex has been continuously evolving from conventional industrial complexes to eco-industrial parks by spontaneous industrial symbiosis. This paper describes the Korean national policies and the developmental activities of this vision to drive the global trend of innovation for converting the existing industrial parks to eco-industrial parks through inter-industry waste, energy, and material exchange in Ulsan Industrial complexes. In addition, the primary and supportive components of the Ulsan EIP pilot project, which will be implemented for 5 years is elaborated with its schedules and economic benefits.

Major challenges loom for natural gas industry, study says

DOE Office of Scientific and Technical Information (OSTI.GOV)

O'Driscoll, M.

The 1994 edition of Natural Gas Trends, the annual joint study by Cambridge Energy Research Associates and Arthur Anderson Co., says that new oil-to-gas competition, price risks and the prospect of unbundling for local distribution companies loom as major challenges for the natural gas industry. With a tighter supply-demand balance in the past two years compounded by the fall in oil prices, gas is in head-to-head competition with oil for marginal markets, the report states. And with higher gas prices in 1993, industrial demand growth slowed while utility demand for gas fell. Some of this was related to fuel switching,more » particularly in the electric utility sector. Total electric power demand for gas has risen slightly due to the growth in industrial power generation, but there has yet to be a pronounced surge in gas use during the 1990s - a decade in which many had expected gas to make major inroads into the electric power sector, the report states. And while utilities still have plans to add between 40,000 and 45,000 megawatts of gas-fired generating capacity, gas actually has lost ground in the utility market to coal and nuclear power: In 1993, electricity output from coal and nuclear rose, while gas-fired generation fell to an estimated 250 billion kilowatt-hours - the lowest level since 1986, when gas generated 246 billion kwh.« less

Information for a Vocational Education Plan. Joint Vocational School Districts.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus.

Providing information for simulation activity, the materials in this document are intended to help train administrators in the utilization of a set of reporting/planning forms developed as a statewide model for local school district use in vocational education planning and development in Ohio. The information is presented in three parts: state…

Ruminant methane reduction through livestock development in Tanzania. Final report for US Department of Energy and US Initiative on Joint Implementation--Activities Implemented Jointly

DOE Office of Scientific and Technical Information (OSTI.GOV)

Livingston, Roderick

1999-07-01

This project was designed to help develop the US Initiative on Joint Implementation activities in Eastern Africa. It has been communicated in meetings with representatives from the Ministry of Environment of Tanzania and the consultant group that developed Tanzania's National Climate Change Action Plan, the Centre for Energy, Environment, Science and Technology, that this project fits very well with the developmental and environmental goals of the Government of Tanzania. The goal of the Activities Implemented Jointly ruminant livestock project is to reduce ruminant methane emissions in Eastern Africa. The project plans a sustainable cattle multiplication unit (CMU) at Mabuki Ranchmore » in the Mwanza Region of Tanzania. This CMU will focus on raising genetically improved animals to be purchased by farmers, developmental organizations, and other CMUs in Tanzania. Through the purchase of these animals farmers will raise their income generation potential and reduce ruminant methane emissions.« less

Recommendations for the use of precast deck panels at expansion joints

DOT National Transportation Integrated Search

2008-11-01

Prestressed concrete panels have been used by the bridge construction industry in the state of Texas for many : years to increase construction speed and improve safety and economy. At expansion joints, cast-in-place concrete : is used and requires te...

National ITS Program Plan Intelligent Transportation Systems Volume I

DOT National Transportation Integrated Search

1995-03-01

ADVANCED TRAVELER INFORMATION SYSTEMS OR ATIS : THE PURPOSE OF THE NATIONAL ITS PROGRAM PLAN IS TO GUIDE THE DEVELOPMENT AND DEPLOYMENT OF INTELLIGENT TRANSPORTATION SYSTEMS (ITS) IN THE UNITED STATES. THIS, THE FIRST EDITION OF THE PLAN WAS A JOINT ...

High-power Laser Welding of Thick Steel-aluminum Dissimilar Joints

NASA Astrophysics Data System (ADS)

Lahdo, Rabi; Springer, André; Pfeifer, Ronny; Kaierle, Stefan; Overmeyer, Ludger

According to the Intergovernmental Panel on Climate Change (IPCC), a worldwide reduction of CO2-emissions is indispensable to avoid global warming. Besides the automotive sector, lightweight construction is also of high interest for the maritime industry in order to minimize CO2-emissions. Using aluminum, the weight of ships can be reduced, ensuring lower fuel consumption. Therefore, hybrid joints of steel and aluminum are of great interest to the maritime industry. In order to provide an efficient lap joining process, high-power laser welding of thick steel plates (S355, t = 5 mm) and aluminum plates (EN AW-6082, t = 8 mm) is investigated. As the weld seam quality greatly depends on the amount of intermetallic phases within the joint, optimized process parameters and control are crucial. Using high-power laser welding, a tensile strength of 10 kN was achieved. Based on metallographic analysis, hardness tests, and tensile tests the potential of this joining method is presented.

Optimal trajectory planning of free-floating space manipulator using differential evolution algorithm

NASA Astrophysics Data System (ADS)

Wang, Mingming; Luo, Jianjun; Fang, Jing; Yuan, Jianping

2018-03-01

The existence of the path dependent dynamic singularities limits the volume of available workspace of free-floating space robot and induces enormous joint velocities when such singularities are met. In order to overcome this demerit, this paper presents an optimal joint trajectory planning method using forward kinematics equations of free-floating space robot, while joint motion laws are delineated with application of the concept of reaction null-space. Bézier curve, in conjunction with the null-space column vectors, are applied to describe the joint trajectories. Considering the forward kinematics equations of the free-floating space robot, the trajectory planning issue is consequently transferred to an optimization issue while the control points to construct the Bézier curve are the design variables. A constrained differential evolution (DE) scheme with premature handling strategy is implemented to find the optimal solution of the design variables while specific objectives and imposed constraints are satisfied. Differ from traditional methods, we synthesize null-space and specialized curve to provide a novel viewpoint for trajectory planning of free-floating space robot. Simulation results are presented for trajectory planning of 7 degree-of-freedom (DOF) kinematically redundant manipulator mounted on a free-floating spacecraft and demonstrate the feasibility and effectiveness of the proposed method.

Incorporating GIS data into an agent-based model to support planning policy making for the development of creative industries

NASA Astrophysics Data System (ADS)

Liu, Helin; Silva, Elisabete A.; Wang, Qian

2016-07-01

This paper presents an extension to the agent-based model "Creative Industries Development-Urban Spatial Structure Transformation" by incorporating GIS data. Three agent classes, creative firms, creative workers and urban government, are considered in the model, and the spatial environment represents a set of GIS data layers (i.e. road network, key housing areas, land use). With the goal to facilitate urban policy makers to draw up policies locally and optimise the land use assignment in order to support the development of creative industries, the improved model exhibited its capacity to assist the policy makers conducting experiments and simulating different policy scenarios to see the corresponding dynamics of the spatial distributions of creative firms and creative workers across time within a city/district. The spatiotemporal graphs and maps record the simulation results and can be used as a reference by the policy makers to adjust land use plans adaptively at different stages of the creative industries' development process.

Enabling Interoperable Space Robots With the Joint Technical Architecture for Robotic Systems (JTARS)

NASA Technical Reports Server (NTRS)

Bradley, Arthur; Dubowsky, Steven; Quinn, Roger; Marzwell, Neville

2005-01-01

Robots that operate independently of one another will not be adequate to accomplish the future exploration tasks of long-distance autonomous navigation, habitat construction, resource discovery, and material handling. Such activities will require that systems widely share information, plan and divide complex tasks, share common resources, and physically cooperate to manipulate objects. Recognizing the need for interoperable robots to accomplish the new exploration initiative, NASA s Office of Exploration Systems Research & Technology recently funded the development of the Joint Technical Architecture for Robotic Systems (JTARS). JTARS charter is to identify the interface standards necessary to achieve interoperability among space robots. A JTARS working group (JTARS-WG) has been established comprising recognized leaders in the field of space robotics including representatives from seven NASA centers along with academia and private industry. The working group s early accomplishments include addressing key issues required for interoperability, defining which systems are within the project s scope, and framing the JTARS manuals around classes of robotic systems.

Stochastic Evolutionary Algorithms for Planning Robot Paths

NASA Technical Reports Server (NTRS)

Fink, Wolfgang; Aghazarian, Hrand; Huntsberger, Terrance; Terrile, Richard

2006-01-01

A computer program implements stochastic evolutionary algorithms for planning and optimizing collision-free paths for robots and their jointed limbs. Stochastic evolutionary algorithms can be made to produce acceptably close approximations to exact, optimal solutions for path-planning problems while often demanding much less computation than do exhaustive-search and deterministic inverse-kinematics algorithms that have been used previously for this purpose. Hence, the present software is better suited for application aboard robots having limited computing capabilities (see figure). The stochastic aspect lies in the use of simulated annealing to (1) prevent trapping of an optimization algorithm in local minima of an energy-like error measure by which the fitness of a trial solution is evaluated while (2) ensuring that the entire multidimensional configuration and parameter space of the path-planning problem is sampled efficiently with respect to both robot joint angles and computation time. Simulated annealing is an established technique for avoiding local minima in multidimensional optimization problems, but has not, until now, been applied to planning collision-free robot paths by use of low-power computers.

Single stage treatment of ankylosis of the temporomandibular joint using patient-specific total joint replacement and virtual surgical planning.

PubMed

Haq, Jahrad; Patel, Nishma; Weimer, Katherine; Matthews, N Shaun

2014-04-01

Ankylosis of the temporomandibular joint (TMJ) is a debilitating condition that can result in pain, trismus, and a poor quality of life. It can be caused by injury, infection, and rheumatoid disease. Current management includes gap arthroplasty, interpositional arthroplasty, and reconstruction. Traditionally, joints are reconstructed using stock implants, or the procedure is done in two stages with an additional computed tomography (CT) scan between the resective and reconstructive procedures and use of stereolithographic models to aid the design of the definitive prostheses. We describe a technique for the resection of ankylosis and reconstruction of the joint in a single operation using virtually designed custom-made implants. Five patients with ankylosis of the TMJ had a single stage operation with reconstruction between 2010 and 2012. All had preoperative high-resolution CT with contrast angiography. During an international web-based teleconference between the surgeon and the engineer a virtual resection of the ankylosis was done using the reconstructed CT images. The bespoke cutting guides and implants were designed virtually at the same time and were then manufactured precisely using computer-aided design and manufacture (CAD-CAM) over 6 weeks. After release of the ankylosis and reconstruction, the patients underwent an exercise regimen to improve mouth opening. Follow-up was for a minimum of 6 months. Four patients had one operation, and one patient had two. Median/Mean maximum incisal opening increased from 0.6mm before operation to 25 mm afterwards (range 23-27), and there was minimal surgical morbidity. This new method effectively treats ankylosis of the TMJ in a single stage procedure. Fewer operations and hospital stays, and the maintenance of overall clinical outcome are obvious advantages. Crown Copyright © 2014. Published by Elsevier Ltd. All rights reserved.

Regional Anesthesia in Total Joint Arthroplasty: What Is the Evidence?

PubMed

Elmofty, Dalia H; Buvanendran, Asokumar

2017-09-01

Total joint arthroplasty is one of the most common surgical procedures performed for end-stage osteoarthritis. The increasing demand for knee and hip arthroplasties along with the improvement in life expectancy has created a substantial medical and economic impact on the society. Effective planning of health care for these individuals is vital. The best method for providing anesthesia and analgesia for total joint arthroplasty has not been defined. Yet, emerging evidence suggests that the type of anesthesia can affect morbidity and mortality of patients undergoing these procedures. Copyright © 2017 Elsevier Inc. All rights reserved.

JANUS: Joint Academic Network Using Satellite. Brief Description of Project. IET Papers on Broadcasting: No. 287.

ERIC Educational Resources Information Center

Bates, A. W.

The JANUS (Joint Academic Network Using Satellite) satellite network is being planned to link European institutions wishing to jointly produce distance teaching materials. Earth stations with capabilities for transmit/receive functions, voice/data functions, two 64 kbs channels, and connection to local telephone exchange and computer networks will…

Intelligent Vehicle Initiative: Business Plan

DOT National Transportation Integrated Search

1997-11-01

The U.S. Department of Transportation (USDOT) is embarking on a new program called the Intelligent Vehicle Initiative (IVI). The USDOT intends to jointly define the program plan and conduct the IVI in cooperation with the motor vehicle, trucking, and...

Friction stir welding of T joints of dissimilar aluminum alloy: A review

NASA Astrophysics Data System (ADS)

Thakare, Shrikant B.; Kalyankar, Vivek D.

2018-04-01

Aluminum alloys are preferred in the mechanical design due to their advantages like high strength, good corrosion resistance, low density and good weldability. In various industrial applications T joints configuration of aluminum alloys are used. In different fields, T joints having skin (horizontal sheet) strengthen by stringers (vertical sheets) were used to increase the strength of structure without increasing the weight. T joints are usually carried out by fusion welding which has limitations in joining of aluminum alloy due to significant distortion and metallurgical defects. Some aluminum alloys are even non weldable by fusion welding. The friction stir welding (FSW) has an excellent replacement of conventional fusion welding for T joints. In this article, FSW of T joints is reviewed by considering aluminum alloy and various joint geometries for defect analysis. The previous experiments carried out on T joints shows the factors such as tool geometry, fixturing device and joint configurations plays significant role in defect free joints. It is essential to investigate the material flow during FSW to know joining mechanism and the formation of joint. In this study the defect occurred in the FSW are studied for various joint configurations and parameters. Also the effect of the parameters and defects occurs on the tensile strength are studied. It is concluded that the T-joints of different joint configurations can be pretended successfully. Comparing to base metal some loss in tensile strength was observed in the weldments as well as overall reduction of the hardness in the thermos mechanically affected zone also observed.

On the Logic and Process of Collaborative Innovation in Higher Vocational Education and Industrial Development

ERIC Educational Resources Information Center

Zhibin, Tang; Weiping, Shi

2017-01-01

Modern development of vocational education requires the joint participation of multiple departments and entities, and industry-education cooperation is a basic requirement. Against the backdrop of the third industrial revolution, cultivating skilled, innovative graduates and transforming the model of industrial technical innovation requires…

National ITS Program Plan, Intelligent Transportation Systems Volume II

DOT National Transportation Integrated Search

1995-03-01

THE PURPOSE OF THE NATIONAL ITS PROGRAM PLAN IS TO GUIDE THE DEVELOPMENT AND DEPLOYMENT OF INTELLIGENT TRANSPORTATION SYSTEMS (ITS) IN THE UNITED STATES. THIS, THE FIRST EDITION OF THE PLAN WAS A JOINT EFFORT OF ITS AMERICA AND THE UNITED STATES DEPA...

76 FR 45515 - Second Notice of Intent To Prepare an Environmental Impact Statement Related to Two Joint State...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-29

... Resource Management Plans for Puget Sound Hatchery Programs and Reopening of Comment Period AGENCY... prepare an Environmental Impact Statement (EIS) for two hatchery Resource Management Plans and appended Hatchery and Genetic Management Plans (HGMPs) jointly proposed by the Washington Department of Fish and...

Comprehensive treatment of temporomandibular joint disorders.

PubMed

Navrátil, Leos; Navratil, Vaclav; Hajkova, Simona; Hlinakova, Petra; Dostalova, Tatjana; Vranová, Jana

2014-01-01

Changing lifestyles, decreasing physical activity, which is increasing the number of degenerative joint diseases of various etiology, and certain dental procedures are increasing the number of patients complaining of pain in their temporomandibular joints. The aim of the study was to assess the benefits of comprehensive physiotherapy sessions in order to decrease the number of temporomandibular joint problems, thereby improving the patient's quality of life. An examination by a dentist determined each patient's treatment plan, which consisted of a medical exam, physical therapy and education. Each form of treatment was applied 10 times at intervals of 7-14 days. The main goal of the therapeutic physical education was to redress the muscle imbalance in the mandibular joint. This was achieved by restoring balance between the masticatory muscles, along with releasing the spastic shrouds found in the masticatory muscles. The aim of education was to teach the patient exercises focused on the temporomandibular joint and masticatory muscles. The intensity of the exercises and their composition were individually adjusted and adapted to their current state. Physical therapy consisted of the application of pulsed magnetic therapy, laser therapy, and non-invasive positive thermotherapy. The above procedure was conducted on a therapeutic group of 24 patients (3 men and 20 women). In the course of therapy, there were no complications, and all patients adhered to the prescribed regime. None reported any side effects. The mean treatment duration was 123 +/- 66 days. The outcome of the therapy was evaluated as described in the methodology, the degree of pain affecting the joint, and the opening ability of the mouth. In both parameters, there was a significant decline in patient pain. In a study devoted to tactics of rehabilitation treatment for temporomandibular joint disorders, the need for comprehensive long-term therapy, involving education, and learning proper chewing habits

European Industrial Doctorates: Marie Curie Actions

ERIC Educational Resources Information Center

European Commission, 2012

2012-01-01

European industrial doctorates are joint doctoral training projects funded by the European Union (EU) and open to all research fields. The project brings together an academic participant (university, research institution, etc.) and a company. They have to be established in two different EU Member States or associated countries. Associated partners…

In-field implementation of impedance-based structural health monitoring for insulated rail joints

NASA Astrophysics Data System (ADS)

Albakri, Mohammad I.; Malladi, V. V. N. Sriram; Woolard, Americo G.; Tarazaga, Pablo A.

2017-04-01

Track defects are a major safety concern for the railroad industry. Among different track components, insulated rail joints, which are widely used for signaling purposes, are considered a weak link in the railroad track. Several joint-related defects have been identified by the railroad community, including rail wear, torque loss, and joint bar breakage. Current track inspection techniques rely on manual and visual inspection or on specially equipped testing carts, which are costly, timeconsuming, traffic disturbing, and prone to human error. To overcome the aforementioned limitations, the feasibility of utilizing impedance-based structural health monitoring for insulated rail joints is investigated in this work. For this purpose, an insulated joint, provided by Koppers Inc., is instrumented with piezoelectric transducers and assembled with 136 AREA rail plugs. The instrumented joint is then installed and tested at the Facility for Accelerated Service Testing, Transportation Technology Center Inc. The effects of environmental and operating conditions on the measured impedance signatures are investigated through a set of experiments conducted at different temperatures and loading conditions. The capabilities of impedance-based SHM to detect several joint-related damage types are also studied by introducing reversible mechanical defects to different joint components.

Using Alternate Energy Sources. The Illinois Plan for Industrial Education.

ERIC Educational Resources Information Center

Illinois State Univ., Normal.

This guide, which is one in the "Exploration" series of curriculum guides intended to assist junior high and middle school industrial educators in helping their students explore diverse industrial situations and technologies used in industry, deals with using alternate energy sources. The following topics are covered in the individual lessons:…

Community of Interest Engagement Process Plan

DTIC Science & Technology

2012-02-09

and input from Subject Matter Experts (SMEs), as shown in the far left of Figure 2. The team may prepare a Business Process Model Notation ( BPMN ) 22...22 Business Process Modeling Notation ( BPMN ) is a method of illustrating business processes in the form of a...Community of Interest Engagement Plan Joint Planning and Development Office 21 10. Acronyms BPMN Business Process Modeling Notation COI

Strategy Planning Visualization Tool (SPVT) for the Air Operations Center (AOC). Volume 2: Information Operations (IO) Planning Enhancements

DTIC Science & Technology

2009-12-31

Status and Assessment data interfaces leverage the TBONE Services and data model. The services and supporting Java 2 Platform Enterprise Edition (J2EE...existing Java ™ and .Net developed “Fat Clients.” The IOPC-X design includes an Open Services Gateway Initiative (OSGi) compliant plug-in...J2EE Java 2 Platform Enterprise Edition JAOP Joint Air Operations Plan JAST JAOP AOD Status Tool JFACC Joint Forces Air Component Commander Data

A unified motion planning approach for redundant and non-redundant manipulators with actuator constraints. Ph.D. Thesis Final Report

NASA Technical Reports Server (NTRS)

Chung, Ching-Luan

1990-01-01

The term trajectory planning has been used to refer to the process of determining the time history of joint trajectory of each joint variable corresponding to a specified trajectory of the end effector. The trajectory planning problem was solved as a purely kinematic problem. The drawback is that there is no guarantee that the actuators can deliver the effort necessary to track the planned trajectory. To overcome this limitation, a motion planning approach which addresses the kinematics, dynamics, and feedback control of a manipulator in a unified framework was developed. Actuator constraints are taken into account explicitly and a priori in the synthesis of the feedback control law. Therefore the result of applying the motion planning approach described is not only the determination of the entire set of joint trajectories but also a complete specification of the feedback control strategy which would yield these joint trajectories without violating actuator constraints. The effectiveness of the unified motion planning approach is demonstrated on two problems which are of practical interest in manipulator robotics.

The National Shipbuilding Research Program. Proceedings of the IREAPS Technical Symposium. Paper No. 24: MAPLIS: An On-Line Materials Resource Planning System Tailored to the Shipbuilding and Offshore Industry

DTIC Science & Technology

1982-09-01

Offshore Industry U.S. DEPARTMENT OF THE NAVY CARDEROCK DIVISION, NAVAL SURFACE WARFARE CENTER Report Documentation Page Form ApprovedOMB No . 0704...INNOVATION MARINE INDUSTRY STANDARDS WELDING INDUSTRIAL ENGINEERING EDUCATION AND TRAINING THE NATIONAL SHIPBUILDING RESEARCH PROGRAM September 1982 NSRP 0009...Proceedings of the IREAPS Technical Symposium Paper No . 24: MAPLIS: An On-Line Materials Resource Planning System Tailored to the Shipbuilding and

Development opportunities for hospital clinical laboratory joint ventures.

PubMed

Van Riper, J A

1995-01-01

Regional health-care providers are being given the opportunity to collaborate in specialty health-care services. Collaboration to achieve superior economies of scale is very effective in the clinical laboratory industry. National laboratory chains are consolidating and enhancing their control of the industry to ensure their historic profitability. National companies have closed many laboratory facilities and have laid off substantial numbers of laboratory personnel. Health-care providers can regain control of their locally generated laboratory health-care dollars by joining forces with clinical laboratory joint ventures. Laboratorians can assist the healthcare providers in bringing laboratory services and employment back to the local community. New capital for operational development and laboratory information systems will help bring the laboratory to the point of care. The independent regional laboratory is focused on supporting the medical needs of the community. The profit generated from a laboratory joint venture is shared among local health-care providers, supporting their economic viability. The laboratories' ability to contribute to the development of profit-making ventures will provide capital for new laboratory development. All of the above will ensure the clinical laboratories' role in providing quality health care to our communities and employment opportunities for laboratory personnel.

Protocol for concomitant temporomandibular joint custom-fitted total joint reconstruction and orthognathic surgery utilizing computer-assisted surgical simulation.

PubMed

Movahed, Reza; Teschke, Marcus; Wolford, Larry M

2013-12-01

Clinicians who address temporomandibular joint (TMJ) pathology and dentofacial deformities surgically can perform the surgery in 1 stage or 2 separate stages. The 2-stage approach requires the patient to undergo 2 separate operations and anesthesia, significantly prolonging the overall treatment. However, performing concomitant TMJ and orthognathic surgery (CTOS) in these cases requires careful treatment planning and surgical proficiency in the 2 surgical areas. This article presents a new treatment protocol for the application of computer-assisted surgical simulation in CTOS cases requiring reconstruction with patient-fitted total joint prostheses. The traditional and new CTOS protocols are described and compared. The new CTOS protocol helps decrease the preoperative workup time and increase the accuracy of model surgery. Copyright © 2013 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Health working with industry to promote fruit and vegetables: a case study of the Western Australian Fruit and Vegetable Campaign with reflection on effectiveness of inter-sectoral action.

PubMed

Miller, Margaret; Pollard, Christina

2005-04-01

In 1990, the Department of Health in Western Australia (DOH) initiated a five-year campaign to increase awareness of the need to eat more fruit and vegetables and to encourage increased consumption. This paper describes aspects of the campaign and reviews the strengths and weaknesses of health and fruit and vegetable industry alliances to extend and sustain the campaign. The fruit and vegetable industry was engaged through information sharing, consultation, working groups and joint promotions. The partnership was examined in terms of six inter-sectoral action dimensions (necessity; opportunity and capacity to work together; established relationships for goal achievement; degree of planning; potential for evaluation; and sustainability of action). There were both need and opportunity for each sector to work together. Health had commitment, expertise and resources to plan, implement and evaluate the campaign. Industry had established channels of communication within the supply chain. Sustained health sector presence provided incentive, endorsement and policy direction. Resources and infrastructure limited partnership sustainability. Greatest potential for success occurred when participants' contributions were closely aligned to their core business and there was a body responsible for co-ordinating action.

Enhanced Planning Review of the Dallas-Fort Worth Metropolitan Area

DOT National Transportation Integrated Search

1996-06-01

FTA and FHWA have initiated a series of joint Enhanced Planning Reviews (EPRs) to assess the impact of the Intermodal Surface Transportation Efficiency Act of 1991 (ISTEA) on the planning processes conducted by the transportation agencies serving met...

The Perceptions of the Automotive Supply Industry Related to Information Technology Utilization and Creating Barriers to Competitive Market Entry: A Case Study of the Implications for Strategic Planning

ERIC Educational Resources Information Center

Cargal, Joseph L.

2010-01-01

The purpose of this study was to examine information technology/systems strategy related factors in the automotive supply industry based on responses to the Strategic Planning and Business Performance Survey provided to automotive suppliers. This population produces supplies to the automotive industry with products valued at hundreds of billions…

78 FR 55338 - ITS Joint Program Office; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-10

... DEPARTMENT OF TRANSPORTATION Research and Innovative Technology Administration ITS Joint Program Office; Notice of Meeting AGENCY: Research and Innovative Technology Administration (RITA), U.S. Department of Transportation. ACTION: Notice. This notice announces the cancellation of the Connected Vehicle Planning and Policy Stakeholder Meeting. Th...

Percutaneous foot joint needle placement using a C-arm flat-panel detector CT.

PubMed

Wiewiorski, Martin; Takes, Martin Thanh Long; Valderrabano, Victor; Jacob, Augustinus Ludwig

2012-03-01

Image guidance is valuable for diagnostic injections in foot orthopaedics. Flat-detector computed tomography (FD-CT) was implemented using a C-arm, and the system was tested for needle guidance in foot joint injections. FD-CT-guided joint infiltration was performed in 6 patients referred from the orthopaedic department for diagnostic foot injections. All interventions were performed utilising a flat-panel fluoroscopy system utilising specialised image guidance and planning software. Successful infiltration was defined by localisation of contrast media depot in the targeted joint. The pre- and post-interventional numeric analogue scale (NAS) pain score was assessed. All injections were technically successful. Contrast media deposit was documented in all targeted joints. Significant relief of symptoms was noted by all 6 participants. FD-CT-guided joint infiltration is a feasible method for diagnostic infiltration of midfoot and hindfoot joints. The FD-CT approach may become an alternative to commonly used 2D-fluoroscopically guidance.

Curricular Joint Ventures: A New Chapter in US Cross-Border Education?

ERIC Educational Resources Information Center

Eckel, Peter D.; Green, Madeleine F.; Affolter-Caine, Britany

2004-01-01

For universities in industrialized nations such as the United States, globalization poses relatively little threat and offers many benefits. This article identifies and describes one trend emerging from globalization--how American colleges and universities are leveraging their curricula internationally through joint ventures between universities…

A Reference Model for Sustainable E-Learning Service Systems: Experiences with the Joint University/Teradata Consortium

ERIC Educational Resources Information Center

Demirkan, Haluk; Goul, Michael; Gros, Mary

2010-01-01

Many e-learning service systems fail. This is particularly true for those sponsored by joint industry/university consortia where substantial economic investments are required up-front. This article provides an industry/university consortia reference model validated through experiences with the 8-year-old Teradata University Network. The reference…

Training Community Modeling and Simulation Business Plan: 2008 Edition

DTIC Science & Technology

2009-12-01

Collaborative information environment. Collaborative tools will help CCDRs and joint staffs plan and disseminate operations, link the staffs to subject matter...anticipating direct and indirect effects as they propagate through political, military, economic, sociological, and information infrastructures. Capabilities...will also 5-11 enhance training for joint staffs and task forces; crisis management; JUO; information warfare; interagency, intergovernmental, and

78 FR 66058 - Habitat Conservation Plan for South Sacramento County, California

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-04

... Connector Joint Powers Authority, the Sacramento Regional County Sanitation District, the Sacramento County Water Agency, and a South Sacramento Habitat Conservation Plan Joint Powers Authority) for activities... listed fish or wildlife is defined under the Act as to harass, harm, pursue, hunt, shoot, wound, kill...

NextGen Weather Plan, Version 1.1

DTIC Science & Technology

2009-09-17

values of weather parameters at a station or over an area. In this paper, we often refer to aeronautical climatology, which is the application of the data...Joint Planning and Development Office NEXTGEN Weather Plan Version 1.1 Version 1.1 i September 17, 2009 Report Documentation Page Form...COVERED 00-00-2009 to 00-00-2009 4. TITLE AND SUBTITLE NextGen Weather Plan 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6

Iterative framework for the joint segmentation and CT synthesis of MR images: application to MRI-only radiotherapy treatment planning

NASA Astrophysics Data System (ADS)

Burgos, Ninon; Guerreiro, Filipa; McClelland, Jamie; Presles, Benoît; Modat, Marc; Nill, Simeon; Dearnaley, David; deSouza, Nandita; Oelfke, Uwe; Knopf, Antje-Christin; Ourselin, Sébastien; Cardoso, M. Jorge

2017-06-01

To tackle the problem of magnetic resonance imaging (MRI)-only radiotherapy treatment planning (RTP), we propose a multi-atlas information propagation scheme that jointly segments organs and generates pseudo x-ray computed tomography (CT) data from structural MR images (T1-weighted and T2-weighted). As the performance of the method strongly depends on the quality of the atlas database composed of multiple sets of aligned MR, CT and segmented images, we also propose a robust way of registering atlas MR and CT images, which combines structure-guided registration, and CT and MR image synthesis. We first evaluated the proposed framework in terms of segmentation and CT synthesis accuracy on 15 subjects with prostate cancer. The segmentations obtained with the proposed method were compared using the Dice score coefficient (DSC) to the manual segmentations. Mean DSCs of 0.73, 0.90, 0.77 and 0.90 were obtained for the prostate, bladder, rectum and femur heads, respectively. The mean absolute error (MAE) and the mean error (ME) were computed between the reference CTs (non-rigidly aligned to the MRs) and the pseudo CTs generated with the proposed method. The MAE was on average 45.7+/- 4.6 HU and the ME -1.6+/- 7.7 HU. We then performed a dosimetric evaluation by re-calculating plans on the pseudo CTs and comparing them to the plans optimised on the reference CTs. We compared the cumulative dose volume histograms (DVH) obtained for the pseudo CTs to the DVH obtained for the reference CTs in the planning target volume (PTV) located in the prostate, and in the organs at risk at different DVH points. We obtained average differences of -0.14 % in the PTV for {{D}98 % } , and between -0.14 % and 0.05% in the PTV, bladder, rectum and femur heads for D mean and {{D}2 % } . Overall, we demonstrate that the proposed framework is able to automatically generate accurate pseudo CT images and segmentations in the pelvic region, potentially bypassing the need for CT scan for accurate RTP.

Crisis action planning and replanning using SIPE-2

NASA Technical Reports Server (NTRS)

Skidmore, Jennifer D.

1993-01-01

Rome Laboratory and DARPA are jointly sponsoring an initiative to develop the next generation of AI planning and scheduling technology focused on military operations planning, especially for crisis situations. SRI International has demonstrated their knowledge-based planning technology in this domain with a system called SOCAP, System for Operations Crisis Action Planning. SOCAP's underlying power comes from SIPE-2, a hierarchical, domain-independent, nonlinear AI planner also developed at SRI. This paper discusses the features of SIPE-2 that made it an ideal choice for military operations planning and which contributed greatly to SOCAP's success.

Joint Test and Evaluation Procedures Manual.

DTIC Science & Technology

1980-09-01

offices within 0oD such as ODDTE may allot funds to individual JTFs for purchasing goods and services. 1-12 Service support to JT&E is usually drawn...on underlying assumptions about the "real world," and that a good operational scenario may conflict with the assumptions for a specific statistical...Learned Since a good Data Management Plan is critical to the success of a joint test, some situations which have occurred in previous tests are listed

Joint Action Coordination in 2½- and 3-Year-Old Children

PubMed Central

Meyer, Marlene; Bekkering, Harold; Paulus, Markus; Hunnius, Sabine

2010-01-01

When acting jointly with others, adults can be as proficient as when acting individually. However, how young children coordinate their actions with another person and how their action coordination develops during early childhood is not well understood. By means of a sequential button-pressing game, which could be played jointly or individually, the action coordination of 2½- and 3-year-old children was examined. Performance accuracy and variability of response timing were taken as indicators of coordination ability. Results showed substantial improvement in joint action coordination between the age of 2½ and 3, but both age groups performed equally well when acting individually. Interestingly, 3-year-olds performed equally well in the joint and the individual condition, whereas 2½-year-olds did not yet show this adult-like pattern as indicated by less accurate performance in the joint action. The findings suggest that in contrast to 3-year-olds, 2½-year-olds still have difficulties in establishing well-coordinated joint action with an adult partner. Possible underlying cognitive abilities such as action planning and action control are discussed. PMID:21165176

The technology and welding joint properties of hybrid laser-tig welding on thick plate

NASA Astrophysics Data System (ADS)

Shenghai, Zhang; Yifu, Shen; Huijuan, Qiu

2013-06-01

The technologies of autogenous laser welding and hybrid laser-TIG welding are used on thick plate of high strength lower alloy structural steel 10CrNiMnMoV in this article. The unique advantages of hybrid laser-TIG welding is summarized by comparing and analyzing the process parameters and welding joints of autogenous laser welding laser welding and hybrid laser-TIG welding. With the optimal process parameters of hybrid welding, the good welding joint without visible flaws can be obtained and its mechanical properties are tested according to industry standards. The results show that the hybrid welding technology has certain advantages and possibility in welding thick plates. It can reduce the demands of laser power, and it is significant for lowering the aspect ratio of weld during hybrid welding, so the gas in the molten pool can rise and escape easily while welding thick plates. Therefore, the pores forming tendency decreases. At the same time, hybrid welding enhances welding speed, and optimizes the energy input. The transition and grain size of the microstructure of hybrid welding joint is better and its hardness is higher than base material. Furthermore, its tensile strength and impact toughness is as good as base material. Consequently, the hybrid welding joint can meet the industry needs completely.

Federal Radionavigation Plan. Vol. IV. Radionavigation Research, Engineering and Development.

DOT National Transportation Integrated Search

1982-03-01

The second edition of the Federal Radionavigation Plan (FRP) has been jointly developed by the U.S. Departments of Defense and Transportation to ensure efficient use of resources and full protection of national interests. The plan sets forth the Fede...

The United States digital recording industry

NASA Technical Reports Server (NTRS)

Simonds, John L.

1993-01-01

The recording industry resembles the semiconductor industry in several aspects. Both are large (greater than $60 Billion/year revenues); both are considered critical technologies supporting national objectives; both are experiencing increased competition from foreign suppliers; they recognize significant opportunities for both technological and market growth in the decade to come; and both realize that a key to this future growth lies in alliances among industry, academia, and government. The semiconductor industry has made significant investments in alliances relating to manufacturing technologies (SEMATECH) and to joint long-term technology research centered in universities (SRC). The federal government has provided funding support of these efforts in recognition of the critical roles semiconductor technologies play in national interests. The recording industry is now also forming critical alliances, but has been slower in starting and in gaining broad recognition by government agencies and legislators that the industry needs federal support. Traditionally, the recording industry has been viewed as mature, stable, and, while critical to national interests, able to chart and fund its own course toward future national needs. That perception is fortunately changing.

76 FR 31457 - Airworthiness Directives; Diamond Aircraft Industries GmbH Model DA 42 Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-01

... Airworthiness Directives; Diamond Aircraft Industries GmbH Model DA 42 Airplanes AGENCY: Federal Aviation... reportedly found on DA 42 Main Landing Gear (MLG) Damper-to-Trailing Arm joints during standard maintenance... DA 42 Main Landing Gear (MLG) Damper-to-Trailing Arm joints during standard maintenance. Depending on...

Evaluation of Margins of Safety in Brazed Joints

NASA Technical Reports Server (NTRS)

Flom, Yury; Wang, Len; Powell, Mollie M.; Soffa, Matthew A.; Rommel, Monica L.

2009-01-01

One of the essential steps in assuring reliable performance of high cost critical brazed structures is the assessment of the Margin of Safety (MS) of the brazed joints. In many cases the experimental determination of the failure loads by destructive testing of the brazed assembly is not practical and cost prohibitive. In such cases the evaluation of the MS is performed analytically by comparing the maximum design loads with the allowable ones and incorporating various safety or knock down factors imposed by the customer. Unfortunately, an industry standard methodology for the design and analysis of brazed joints has not been developed. This paper provides an example of an approach that was used to analyze an AlBeMet 162 (38%Be-62%Al) structure brazed with the AWS BAlSi-4 (Al-12%Si) filler metal. A practical and conservative interaction equation combining shear and tensile allowables was developed and validated to evaluate an acceptable (safe) combination of tensile and shear stresses acting in the brazed joint. These allowables are obtained from testing of standard tensile and lap shear brazed specimens. The proposed equation enables the assessment of the load carrying capability of complex brazed joints subjected to multi-axial loading.

Joint Force Quarterly. Number 5, Summer 1994

DTIC Science & Technology

1994-07-01

terms of a matrix and have set it up to achieve things that matrix organizations facilitate. Matrices compel interaction across organizations; they...provide more joint, synergistic solutions to military problems. One primary result of this interaction between the assess- ment process and JROC is the...the Contingency Tactical Air Control Auto- mated Planning System (CTAPS) are both single-host computer sys- tems that do not support interactive data

Influence of altered gait patterns on the hip joint contact forces.

PubMed

Carriero, Alessandra; Zavatsky, Amy; Stebbins, Julie; Theologis, Tim; Lenaerts, Gerlinde; Jonkers, Ilse; Shefelbine, Sandra J

2014-01-01

Children who exhibit gait deviations often present a range of bone deformities, particularly at the proximal femur. Altered gait may affect bone growth and lead to deformities by exerting abnormal stresses on the developing bones. The objective of this study was to calculate variations in the hip joint contact forces with different gait patterns. Muscle and hip joint contact forces of four children with different walking characteristics were calculated using an inverse dynamic analysis and a static optimisation algorithm. Kinematic and kinetic analyses were based on a generic musculoskeletal model scaled down to accommodate the dimensions of each child. Results showed that for all the children with altered gaits both the orientation and magnitude of the hip joint contact force deviated from normal. The child with the most severe gait deviations had hip joint contact forces 30% greater than normal, most likely due to the increase in muscle forces required to sustain his crouched stance. Determining how altered gait affects joint loading may help in planning treatment strategies to preserve correct loading on the bone from a young age.

Optimised robot-based system for the exploration of elastic joint properties.

PubMed

Frey, M; Burgkart, R; Regenfelder, F; Riener, R

2004-09-01

Numerous publications provide measured biomechanical data relating to synovial joints. However, in general, they do not reflect the non-linear elastic joint properties in detail or do not consider all degrees of freedom (DOF), or the quantity of data is sparse. To perform more comprehensive, extended measurements of elastic joint properties, an optimised robot-based approach was developed. The basis was an industrial, high-precision robot that was capable of applying loads to the joint and measuring the joint displacement in 6 DOF. The system was equipped with novel, custom-made control hardware. In contrast to the commonly used sampling rates that are below 100 Hz, a rate of 4 kHz was realised for each DOF. This made it possible to implement advanced, highly dynamic, quasi-continuous closed-loop controllers. Thus oscillations of the robot were avoided, and measurements were speeded up. The stiffness of the entire system was greater than 44 kNm(-1) and 22 Nm deg(-1), and the maximum difference between two successive measurements was less than 0.5 deg. A sophisticated CT-based referencing routine facilitated the matching of kinematic data with the individual anatomy of the tested joint. The detailed detection of the elastic varus-valgus properties of a human knee joint is described, and the need for high spatial resolution is demonstrated.

Failure Mechanisms of SAC/Fe-Ni Solder Joints During Thermal Cycling

NASA Astrophysics Data System (ADS)

Gao, Li-Yin; Liu, Zhi-Quan; Li, Cai-Fu

2017-08-01

Thermal cycling tests have been conducted on Sn-Ag-Cu/Fe- xNi ( x = 73 wt.% or 45 wt.%) and Sn-Ag-Cu/Cu solder joints according to the Joint Electron Device Engineering Council industrial standard to study their interfacial reliability under thermal stress. The interfacial intermetallic compounds formed for solder joints on Cu, Fe-73Ni, and Fe-45Ni were 4.5 μm, 1.7 μm, and 1.4 μm thick, respectively, after 3000 cycles, demonstrating excellent diffusion barrier effect of Fe-Ni under bump metallization (UBM). Also, two deformation modes, viz. solder extrusion and fatigue crack formation, were observed by scanning electron microscopy and three-dimensional x-ray microscopy. Solder extrusion dominated for solder joints on Cu, while fatigue cracks dominated for solder joints on Fe-45Ni and both modes were detected for those on Fe-73Ni. Solder joints on Fe-Ni presented inferior reliability during thermal cycling compared with those on Cu, with characteristic lifetime of 3441 h, 3190 h, and 1247 h for Cu, Fe-73Ni, and Fe-45Ni UBM, respectively. This degradation of the interfacial reliability for solder joints on Fe-Ni is attributed to the mismatch in coefficient of thermal expansion (CTE) at interconnection level. The CTE mismatch at microstructure level was also analyzed by electron backscatter diffraction for clearer identification of recrystallization-related deformation mechanisms.

Spherical Joint Piston and Connecting Rod Developed

NASA Technical Reports Server (NTRS)

1996-01-01

Under an interagency agreement with the Department of Energy, the NASA Lewis Research Center manages a Heavy-Duty Diesel Engine Technology (HDET) research program. The overall program objectives are to reduce fuel consumption through increased engine efficiency, reduce engine exhaust emissions, and provide options for the use of alternative fuels. The program is administered with a balance of research contracts, university research grants, and focused in-house research. The Cummins Engine Company participates in the HDET program under a cost-sharing research contract. Cummins is researching and developing in-cylinder component technologies for heavy-duty diesel engines. An objective of the Cummins research is to develop technologies for a low-emissions, 55-percent thermal efficiency (LE-55) engine. The best current-production engines in this class achieve about 46-percent thermal efficiency. Federal emissions regulations are driving this technology. Regulations for heavy duty diesel engines were tightened in 1994, more demanding emissions regulations are scheduled for 1998, and another step is planned for 2002. The LE-55 engine emissions goal is set at half of the 1998 regulation level and is consistent with plans for 2002 emissions regulations. LE-55 engine design requirements to meet the efficiency target dictate a need to operate at higher peak cylinder pressures. A key technology being developed and evaluated under the Cummins Engine Company LE-55 engine concept is the spherical joint piston and connecting rod. Unlike conventional piston and connecting rod arrangements which are joined by a pin forming a hinged joint, the spherical joint piston and connecting rod use a ball-and-socket joint. The ball-and-socket arrangement enables the piston to have an axisymmetric design allowing rotation within the cylinder. The potential benefits of piston symmetry and rotation are reduced scuffing, improved piston ring sealing, improved lubrication, mechanical and thermal

Tobacco Industry Influence on Science and Scientists in Germany

PubMed Central

Grüning, Thilo; Gilmore, Anna B.; McKee, Martin

2006-01-01

Using tobacco industry documents, we examined how and why the tobacco industry sought to influence science and scientists in Germany as a possible factor in explaining the German opposition to stricter tobacco regulation. Smoking and health research programs were organized both separately by individual tobacco companies and jointly through their German trade organization. An extensive network of scientists and scientific institutions with tobacco industry links was developed. Science was distorted in 5 ways: suppression, dilution, distraction, concealment, and manipulation. The extent of tobacco industry influence over the scientific establishment in Germany is profound. The industry introduced serious bias that probably influenced scientific and public opinion in Germany. This influence likely undermined efforts to control tobacco use. PMID:16317203

Recent developments: Industry briefs

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1990-09-01

Recent nuclear industry briefs are presented. These briefs include: Bechtel, Westinghouse and consumers form joint venture to operate Palisades; British Goverment to sell PowerGen in public offering; NPT conference opens in Geneva; Soviets buy US computers for nuclear safety; Cameco completes sale of interest in Rabbit Lake; Ebasco and CEGA each win defense reactor contract; East German utility takeover settled; Rio Algom shuts down Quirke and Panel early; and General Atomics buys Beverly mine.

Integrated propulsion technology demonstrator. Program plan

NASA Technical Reports Server (NTRS)

1994-01-01

NASA and Rockwell have embarked on a cooperative agreement to define, develop, fabricate, and operate an integrated propulsion technology demonstrator (IPTD) for the purpose of validating design, process, and technology improvements of launch vehicle propulsion systems. This program, a result of NRA8-11, Task Area 1 A, is jointly funded by both NASA and Rockwell and is sponsored by the Reusable Launch Vehicle office at NASA Marshall Space flight Center. This program plan provides to the joint NASA/Rockwell integrated propulsion technology demonstrator (IPTD) team a description of the activities within tasks / sub tasks and associated schedules required to successfully achieve program objectives. This document also defines the cost elements and manpower allocations for each sub task for purpose of program control. This plan is updated periodically by developing greater depth of direction for outyear tasks as the program matures. Updating is accomplished by adding revisions to existing pages or attaching page revisions to this plan. In either case, revisions will be identified by appropriate highlighting of the change, or specifying a revision page through the use of footnotes on the bottom right of each change page. Authorization for the change is provided by the principal investigators to maintain control of this program plan document and IPTD program activities.

The effect of brazing parameters on corrosion behavior of brazed aluminum joints

NASA Astrophysics Data System (ADS)

Ghasimakbari, Farzam; Hadian, Ali Mohammad; Ershadrad, Soheil; Omidazad, Amir Mansour

2018-01-01

Fluid transmission pipes made of aluminum are widely used in petrochemical industries. For many applications, they have to be brazed to each other. The brazed joints, in many cases, are encountered with corrosive medias. This paper reports a part of a work to investigate the corrosion behavior of brazed AA6061 using AA4047 as filler metal with and without the use of flux under different brazing atmospheres. The samples brazed under air, vacuum, argon, and hydrogen atmospheres. The interfacial area of the joints was examined to ensure being free of any defects. The sides of each test piece were covered with an insulator and the surface of the joint was encountered to polarization test. The results revealed a significant difference of corrosion resistance. The samples that brazed under argon and hydrogen atmospheres had better corrosion resistance than other samples. The microstructure of the corroded joints revealed that the presence of defects, impurities due to use of flux and depth of filter metal penetration in base metal are crucial variables on the corrosion resistance of the joints.

Trajectory planning of free-floating space robot using Particle Swarm Optimization (PSO)

NASA Astrophysics Data System (ADS)

Wang, Mingming; Luo, Jianjun; Walter, Ulrich

2015-07-01

This paper investigates the application of Particle Swarm Optimization (PSO) strategy to trajectory planning of the kinematically redundant space robot in free-floating mode. Due to the path dependent dynamic singularities, the volume of available workspace of the space robot is limited and enormous joint velocities are required when such singularities are met. In order to overcome this effect, the direct kinematics equations in conjunction with PSO are employed for trajectory planning of free-floating space robot. The joint trajectories are parametrized with the Bézier curve to simplify the calculation. Constrained PSO scheme with adaptive inertia weight is implemented to find the optimal solution of joint trajectories while specific objectives and imposed constraints are satisfied. The proposed method is not sensitive to the singularity issue due to the application of forward kinematic equations. Simulation results are presented for trajectory planning of 7 degree-of-freedom (DOF) redundant manipulator mounted on a free-floating spacecraft and demonstrate the effectiveness of the proposed method.

Partnership with Industry: Film Production Technology.

ERIC Educational Resources Information Center

Rietveld, Richard; And Others

The 1988 final report of a task force from the Florida Postsecondary Education Planning Commission stated that in order to ensure continued growth of the motion picture film industry in the state, the postsecondary community must provide a well-trained and competent work force adept in all aspects of the industry. The film industry is a growing…

Water requirements of selected industries

USGS Publications Warehouse

,; Mussey, Orville D.; Conklin, Howard L.; Durfor, Charles N.; Otts, Louis Ethelbert; Walling, Faulkner B.

1955-01-01

The early industries in America generally were established when and where demands for the products of industry arose. Most of the early industries were so located that their increasing requirements for transportation, raw materials, market, labor, and water supply could be satisfied economically. Many of these original plant locations have continued as modern industrial centers and their output has increased manyfold in meeting the demands of our growing Nation. The recent and current industrial expansion and the trend toward the growth of chemical industries, many Of which are heavy users of water, has resulted in a tremendous increase in the total withdrawal of water for industrial use as well as a large increase in the per capita use of water. This increase in industrial water requirement has strained the capacity of the developed water supplies in many areas, and in some instances the adequacy of the potential water supplies is questionable. The Geological Survey is engaged in preparing and publishing a series of reports describing the developed and undeveloped water resources of many important industrial areas. This work was started initially at the request of the National Securities Resources Board as a means to insure that water supplies are adequate for our rapidly expanding industrial development. Although many factors contribute to establishing the feasibility or even the limits of future industrial development, the one relating to available water supply is extremely important. A knowledge of the water requirements of various industries is valuable therefore in planning the logical development in any area where water supply is a critical factor. Thus far very little suitable information on the water requirements of our major industries is available for general planning. An inventory of unit water-use values in industry therefore would be generally helpful and also might tend to stimulate water-conservation methods. To obtain such information

Fires, A Joint Professional Bulletin for US Field & Air Defense Artillerymen. March-April 2008

DTIC Science & Technology

2008-04-01

actions. However, if the effects synchronization division were not added to the lineup , just the teaming of joint fires division and IO division still...ADAFCO would be the liaison between the two Services who coordinates fires and facilitates track identification thus preventing fratricide. Joint...decisions to be made based on current air users versus planned control measures. Interoperability. Identification is a key feature that enables AC2 nodes

76 FR 22648 - Resolution Plans and Credit Exposure Reports Required

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-22

..., including associated services, functions and support that, in the view of the Covered Company or as jointly...-based Covered Company's overall contingency planning process, and information regarding the.... operations be linked to the contingency planning process of the foreign-based Covered Company? Process 1. Are...

Joint Non-Lethal Weapons Program Science and Technology Strategic Plan

DTIC Science & Technology

2016-03-31

compact technology for  sound  generation using advanced  materials    Active Denial Technology (ADT)  Future active denial technology system concept...investment objectives in human effects research, conducted energy  weapons (human electro‐muscular incapacitation), and  sound  and light that will advance...advancing the  development of megawatt class waveguides and rotary joints, innovative  dielectrics and  insulators , and on the characterization of

Design/Analysis of the JWST ISIM Bonded Joints for Survivability at Cryogenic Temperatures

NASA Technical Reports Server (NTRS)

Bartoszyk, Andrew; Johnston, John; Kaprielian, Charles; Kuhn, Jonathan; Kunt, Cengiz; Rodini,Benjamin; Young, Daniel

1990-01-01

A major design and analysis challenge for the JWST ISIM structure is thermal survivability of metal/composite bonded joints below the cryogenic temperature of 30K (-405 F). Current bonded joint concepts include internal invar plug fittings, external saddle titanium/invar fittings and composite gusset/clip joints all bonded to M55J/954-6 and T300/954-6 hybrid composite tubes (75mm square). Analytical experience and design work done on metal/composite bonded joints at temperatures below that of liquid nitrogen are limited and important analysis tools, material properties, and failure criteria for composites at cryogenic temperatures are sparse in the literature. Increasing this challenge is the difficulty in testing for these required tools and properties at cryogenic temperatures. To gain confidence in analyzing and designing the ISIM joints, a comprehensive joint development test program has been planned and is currently running. The test program is designed to produce required analytical tools and develop a composite failure criterion for bonded joint strengths at cryogenic temperatures. Finite element analysis is used to design simple test coupons that simulate anticipated stress states in the flight joints; subsequently the test results are used to correlate the analysis technique for the final design of the bonded joints. In this work, we present an overview of the analysis and test methodology, current results, and working joint designs based on developed techniques and properties.

A novel hybrid joining methodology for composite to steel joints

NASA Astrophysics Data System (ADS)

Sarh, Bastian

This research has established a novel approach for designing, analyzing, and fabricating load bearing structural connections between resin infused composite materials and components made of steel or other metals or alloys. A design philosophy is proposed wherein overlapping joint sections comprised of fiber reinforced plastics (FRP's) and steel members are connected via a combination of adhesive bonding and integrally placed composite pins. A film adhesive is utilized, placed into the dry stack prior to resin infusion and is cured after infusion through either local heat elements or by placing the structure into an oven. The novel manner in which the composite pins are introduced consists of perforating the steel member with holes and placing pre-formed composite pins through them, also prior to resin infusion of the composite section. In this manner joints are co-molded structures such that secondary processing is eliminated. It is shown that such joints blend the structural benefits of adhesive and mechanically connected joints, and that the fabrication process is feasible for low-cost, large-scale production as applicable to the shipbuilding industry. Analysis procedures used for designing such joints are presented consisting of an adhesive joint design theory and a pin placement theory. These analysis tools are used in the design of specimens, specific designs are fabricated, and these evaluated through structural tests. Structural tests include quasi-static loading and low cycle fatigue evaluation. This research has thereby invented a novel philosophy on joints, created the manufacturing technique for fabricating such joints, established simple to apply analysis procedures used in the design of such joints (consisting of both an adhesive and a pin placement analysis), and has validated the methodology through specimen fabrication and testing.

The Joint Lessons Learned System and Interoperability

DTIC Science & Technology

1989-06-02

Learned: 1988-1989 As mentioned in the introduction to this chaoter, the Organizacion of the JcinC Chiefs cf Staff .OJCS) ueren significant transformatioi...Organization and Functions Manual . Washington, D.C.: HQDA, Office of the Deputy Chief 0f Staff for Operations and Plans, June 1984. ’..S. Army. Concept...U.S. Department of Defense. Joint Universal Lessons Learned System (JULLS) User’s Manual . Orlando, Florida: University of Central Florida, Institute

Barriers to shared decision making in mental health care: qualitative study of the Joint Crisis Plan for psychosis.

PubMed

Farrelly, Simone; Lester, Helen; Rose, Diana; Birchwood, Max; Marshall, Max; Waheed, Waquas; Henderson, R Claire; Szmukler, George; Thornicroft, Graham

2016-04-01

Despite increasing calls for shared decision making (SDM), the precise mechanisms for its attainment are unclear. Sharing decisions in mental health care may be especially complex. Fluctuations in service user capacity and significant power differences are particular barriers. We trialled a form of facilitated SDM that aimed to generate patients' treatment preferences in advance of a possible relapse. The 'Joint Crisis Plan' (JCP) intervention was trialled in four mental health trusts in England between 2008 and 2011. This qualitative study used grounded theory methods to analyse focus group and interview data to understand how stakeholders perceived the intervention and the barriers to SDM in the form of a JCP. Fifty service users with psychotic disorders and 45 clinicians participated in focus groups or interviews between February 2010 and November 2011. Results suggested four barriers to clinician engagement in the JCP: (i) ambivalence about care planning; (ii) perceptions that they were 'already doing SDM'; (iii) concerns regarding the clinical 'appropriateness of service users' choices'; and (iv) limited 'availability of service users' choices'. Service users reported barriers to SDM in routine practice, most of which were addressed by the JCP process. Barriers identified by clinicians led to their lack of constructive engagement in the process, undermining the service users' experience. Future work requires interventions targeted at the engagement of clinicians addressing their concerns about SDM. Particular strategies include organizational investment in implementation of service users' choices and directly training clinicians in SDM communication processes. © 2015 John Wiley & Sons Ltd.

Background for Joint Systems Aspects of AIR 6000

DTIC Science & Technology

2000-04-01

Checkland’s Soft Systems Methodology [7, 8,9]. The analytical techniques that are proposed for joint systems work are based on calculating probability...Supporting Global Interests 21 DSTO-CR-0155 SLMP Structural Life Management Plan SOW Stand-Off Weapon SSM Soft Systems Methodology UAV Uninhabited Aerial... Systems Methodology in Action, John Wiley & Sons, Chichester, 1990. [101 Pearl, Judea, Probabilistic Reasoning in Intelligent Systems: Networks of Plausible

Neural correlates of learning and trajectory planning in the posterior parietal cortex

PubMed Central

Torres, Elizabeth B.; Quian Quiroga, Rodrigo; Cui, He; Buneo, Christopher A.

2013-01-01

The posterior parietal cortex (PPC) is thought to play an important role in the planning of visually-guided reaching movements. However, the relative roles of the various subdivisions of the PPC in this function are still poorly understood. For example, studies of dorsal area 5 point to a representation of reaches in both extrinsic (endpoint) and intrinsic (joint or muscle) coordinates, as evidenced by partial changes in preferred directions and positional discharge with changes in arm posture. In contrast, recent findings suggest that the adjacent medial intraparietal area (MIP) is involved in more abstract representations, e.g., encoding reach target in visual coordinates. Such a representation is suitable for planning reach trajectories involving shortest distance paths to targets straight ahead. However, it is currently unclear how MIP contributes to the planning of other types of trajectories, including those with various degrees of curvature. Such curved trajectories recruit different joint excursions and might help us address whether their representation in the PPC is purely in extrinsic coordinates or in intrinsic ones as well. Here we investigated the role of the PPC in these processes during an obstacle avoidance task for which the animals had not been explicitly trained. We found that PPC planning activity was predictive of both the spatial and temporal aspects of upcoming trajectories. The same PPC neurons predicted the upcoming trajectory in both endpoint and joint coordinates. The predictive power of these neurons remained stable and accurate despite concomitant motor learning across task conditions. These findings suggest the role of the PPC can be extended from specifying abstract movement goals to expressing these plans as corresponding trajectories in both endpoint and joint coordinates. Thus, the PPC appears to contribute to reach planning and approach-avoidance arm motions at multiple levels of representation. PMID:23730275

Degenerative joint disease: multiple joint involvement in young and mature dogs.

PubMed

Olsewski, J M; Lust, G; Rendano, V T; Summers, B A

1983-07-01

Radiologic, pathologic, and ancillary methods were used to determine the occurrence of degenerative joint disease involving multiple joints of immature and adult dogs. Animals were selected for the development of hip joint dysplasia and chronic degenerative joint disease. Of disease-prone dogs, 82% (45 of 55 dogs) had radiologic changes, indicative of hip dysplasia, by 1 year of age. At necropsy, more abnormal joints were identified than by radiographic examination. Among 92 dogs between 3 to 11 months of age that had joint abnormalities, 71% had hip joint involvement; 38%, shoulder joint involvement; 22%, stifle joint involvement; and 40% had multiple joint involvement. Polyarthritis was asymptomatic and unexpected. Radiographic examination of older dogs also revealed evidence of degenerative joint disease in many joints. Multiple joint involvement was substantiated at necropsy of young and mature dogs. A similar pattern of polyarticular osteoarthritis was revealed in a survey (computer search) of necropsy reports from medical case records of 100 adult and elderly dogs. Usually, the joint disease was an incidental observation, unrelated to the clinical disease or to the cause of death. The frequent occurrence of degenerative changes in several joints of dogs aged 6 months to 17 years indicated that osteoarthritis may be progressive in these joints and raises the possibility that systemic factors are involved in the disease process.

Analysis of Commercially Available Firefighting Helmet and Boot Options for the Joint Firefighter Integrated Response Ensemble (JFIRE)

DTIC Science & Technology

2012-02-01

AFRL-RX-TY-TR-2012-0022 ANALYSIS OF COMMERCIALLY AVAILABLE HELMET AND BOOT OPTIONS FOR THE JOINT FIREFIGHTER INTEGRATED RESPONSE ENSEMBLE...Interim Technical Report 01-SEP-2010 -- 31-JAN-2011 Analysis of Commercially Available Firefighting Helmet and Boot Options for the Joint Firefighter...ensemble. A requirements correlation matrix was generated and sent to industry detailing objective and threshold measurements for both the helmet

Soldering of Mg Joints Using Zn-Al Solders

NASA Astrophysics Data System (ADS)

Gancarz, Tomasz; Berent, Katarzyna; Skuza, Wojciech; Janik, Katarzyna

2018-07-01

Magnesium has applications in the automotive and aerospace industries that can significantly contribute to greater fuel economy and environmental conservation. The Mg alloys used in the automotive industry could reduce mass by up to 70 pct, providing energy savings. However, alongside the advantages there are limitations and technological barriers to use Mg alloys. One of the advantages concerns phenomena occurring at the interface when joining materials investigated in this study, in regard to the effect of temperature and soldering time for pure Mg joints. Eutectic Zn-Al and Zn-Al alloys with 0.05 (wt pct) Li and 0.2 (wt pct) Na were used in the soldering process. The process was performed for 3, 5, and 8 minutes of contact, at temperatures of 425 °C, 450 °C, 475 °C, and 500 °C. Selected, solidified solder-substrate couples were cross-sectioned, and their interfacial microstructures were investigated by scanning electron microscopy. The experiment was designed to demonstrate the effect of time, temperature, and the addition of Li and Na on the kinetics of the dissolving Mg substrate. The addition of Li and Na to eutectic Zn-Al caused to improve mechanical properties. Higher temperatures led to reduced joint strength, which is caused by increased interfacial reaction.

Soldering of Mg Joints Using Zn-Al Solders

NASA Astrophysics Data System (ADS)

Gancarz, Tomasz; Berent, Katarzyna; Skuza, Wojciech; Janik, Katarzyna

2018-04-01

Magnesium has applications in the automotive and aerospace industries that can significantly contribute to greater fuel economy and environmental conservation. The Mg alloys used in the automotive industry could reduce mass by up to 70 pct, providing energy savings. However, alongside the advantages there are limitations and technological barriers to use Mg alloys. One of the advantages concerns phenomena occurring at the interface when joining materials investigated in this study, in regard to the effect of temperature and soldering time for pure Mg joints. Eutectic Zn-Al and Zn-Al alloys with 0.05 (wt pct) Li and 0.2 (wt pct) Na were used in the soldering process. The process was performed for 3, 5, and 8 minutes of contact, at temperatures of 425 °C, 450 °C, 475 °C, and 500 °C. Selected, solidified solder-substrate couples were cross-sectioned, and their interfacial microstructures were investigated by scanning electron microscopy. The experiment was designed to demonstrate the effect of time, temperature, and the addition of Li and Na on the kinetics of the dissolving Mg substrate. The addition of Li and Na to eutectic Zn-Al caused to improve mechanical properties. Higher temperatures led to reduced joint strength, which is caused by increased interfacial reaction.

Working on a Standard Joint Unit: A pilot test.

PubMed

Casajuana, Cristina; López-Pelayo, Hugo; Mercedes Balcells, María; Miquel, Laia; Teixidó, Lídia; Colom, Joan; Gual, Antoni

2017-09-29

Assessing cannabis consumption remains complex due to no reliable registration systems. We tested the likelihood of establishing a Standard Joint Unit (SJU) which considers the main cannabinoids with implication on health through a naturalistic approach.  Methodology. Pilot study with current cannabis users of four areas of Barcelona: universities, nightclubs, out-patient mental health service, and cannabis associations. We designed and administered a questionnaire on cannabis use-patterns and determined the willingness to donate a joint for analysis. Descriptive statistics were used to analyze the data. Forty volunteers answered the questionnaire (response rate 95%); most of them were men (72.5%) and young adults (median age 24.5 years; IQR 8.75 years) who consume daily or nearly daily (70%). Most participants consume marihuana (85%) and roll their joints with a median of 0.25 gr of marihuana. Two out of three (67.5%) stated they were willing to donate a joint. Obtaining an SJU with the planned methodology has proved to be feasible. Pre-testing resulted in an improvement of the questionnaire and retribution to incentivize donations. Establishing an SJU is essential to improve our knowledge on cannabis-related outcomes.

CRIMSON [CRisis plan IMpact: Subjective and Objective coercion and eNgagement] protocol: a randomised controlled trial of joint crisis plans to reduce compulsory treatment of people with psychosis.

PubMed

Thornicroft, Graham; Farrelly, Simone; Birchwood, Max; Marshall, Max; Szmukler, George; Waheed, Waquas; Byford, Sarah; Dunn, Graham; Henderson, Claire; Lester, Helen; Leese, Morven; Rose, Diana; Sutherby, Kim

2010-11-05

The use of compulsory treatment under the Mental Health Act (MHA) has continued to rise in the UK and in other countries. The Joint Crisis Plan (JCP) is a statement of service users' wishes for treatment in the event of a future mental health crisis. It is developed with the clinical team and an independent facilitator. A recent pilot RCT showed a reduction in the use of the MHA amongst service users with a JCP. The JCP is the only intervention that has been shown to reduce compulsory treatment in this way. The CRIMSON trial aims to determine if JCPs, compared with treatment as usual, are effective in reducing the use of the MHA in a range of treatment settings across the UK. This is a 3 centre, individual-level, single-blind, randomised controlled trial of the JCP compared with treatment as usual for people with a history of relapsing psychotic illness in Birmingham, London and Lancashire/Manchester. 540 service users will be recruited across the three sites. Eligible service users will be adults with a diagnosis of a psychotic disorder (including bipolar disorder), treated in the community under the Care Programme Approach with at least one admission to a psychiatric inpatient ward in the previous two years. Current inpatients and those subject to a community treatment order will be excluded to avoid any potential perceived pressure to participate. Research assessments will be conducted at baseline and 18 months. Following the baseline assessment, eligible service users will be randomly allocated to either develop a Joint Crisis Plan or continue with treatment as usual. Outcome will be assessed at 18 months with assessors blind to treatment allocation. The primary outcome is the proportion of service users treated or otherwise detained under an order of the Mental Health Act (MHA) during the follow-up period, compared across randomisation groups. Secondary outcomes include overall costs, service user engagement, perceived coercion and therapeutic relationships

Determination of Parachute Joint Factors using Seam and Joint Testing

NASA Technical Reports Server (NTRS)

Mollmann, Catherine

2015-01-01

This paper details the methodology for determining the joint factor for all parachute components. This method has been successfully implemented on the Capsule Parachute Assembly System (CPAS) for the NASA Orion crew module for use in determining the margin of safety for each component under peak loads. Also discussed are concepts behind the joint factor and what drives the loss of material strength at joints. The joint factor is defined as a "loss in joint strength...relative to the basic material strength" that occurs when "textiles are connected to each other or to metals." During the CPAS engineering development phase, a conservative joint factor of 0.80 was assumed for each parachute component. In order to refine this factor and eliminate excess conservatism, a seam and joint testing program was implemented as part of the structural validation. This method split each of the parachute structural joints into discrete tensile tests designed to duplicate the loading of each joint. Breaking strength data collected from destructive pull testing was then used to calculate the joint factor in the form of an efficiency. Joint efficiency is the percentage of the base material strength that remains after degradation due to sewing or interaction with other components; it is used interchangeably with joint factor in this paper. Parachute materials vary in type-mainly cord, tape, webbing, and cloth -which require different test fixtures and joint sample construction methods. This paper defines guidelines for designing and testing samples based on materials and test goals. Using the test methodology and analysis approach detailed in this paper, the minimum joint factor for each parachute component can be formulated. The joint factors can then be used to calculate the design factor and margin of safety for that component, a critical part of the design verification process.

Planning for the Elderly Without Architecture Is Like Architecture for the Elderly Without Planning

ERIC Educational Resources Information Center

Bednar, Michael; And Others

1977-01-01

A joint project between the separate divisions of planning and architecture at the UVA School of Architecture was conducted to allow graduate students to study the environmental needs of the elderly. The case-study approach was undertaken in Lynchburg, Virginia, and the year-long project was seen as a "real World" problem. (LBH)

Applied Art in Trade and Industrial Education.

ERIC Educational Resources Information Center

King, Annie; Zirkle, Chris

Ohio Hi-Point Joint Vocational School (JVS) has developed a comprehensive art program within the vocational setting. Selected trade and industrial programs at the school, as well as programs in agriculture and home economics, incorporate art instruction. The goals of the applied art program are as follows: to give students the opportunity to…

"Our reach is wide by any corporate standard": how the tobacco industry helped defeat the Clinton health plan and why it matters now.

PubMed

Tesler, Laura E; Malone, Ruth E

2010-07-01

Contemporary health care reformers, like those who promoted the failed Clinton era plan, face opposition from multiple corporate interests. However, scant literature has examined how relationships between corporations and other stakeholders, such as think tanks and advocacy groups, shape health care reform debate. We show how the 2 biggest US tobacco companies, Philip Morris and RJ Reynolds, and their trade association coordinated in mobilizing ideologically diverse constituencies to help defeat the Clinton plan. Unwittingly perhaps, some reform supporters advanced the tobacco industry's public relations blitz, contributing to perceptions of public opposition to the plan. As the current reform debate unfolds, this case highlights the importance of funding transparency for interpreting the activities of think tanks, advocacy groups, and "grassroots" movements.

Spacesuit mobility joints

NASA Technical Reports Server (NTRS)

Vykukal, H. C. (Inventor)

1978-01-01

Joints for use in interconnecting adjacent segments of an hermetically sealed spacesuit which have low torques, low leakage and a high degree of reliability are described. Each of the joints is a special purpose joint characterized by substantially constant volume and low torque characteristics. Linkages which restrain the joint from longitudinal distension and a flexible, substantially impermeable diaphragm of tubular configuration spanning the distance between pivotally supported annuli are featured. The diaphragms of selected joints include rolling convolutions for balancing the joints, while various joints include wedge-shaped sections which enhance the range of motion for the joints.

Economic Restructuring and Emerging Patterns of Industrial Relations.

ERIC Educational Resources Information Center

Sleigh, Stephen R., Ed.

This book contains nine papers presented during a year-long series of seminars and a conference that analyzed the relationship between economic restructuring and industrial relations involving the joint academics, union leaders, government officials, business executives, and graduate fellows. These analyses include case studies from Western…

NASA-DoD Lead-Free Electronics Project. DRAFT Joint Test Report

NASA Technical Reports Server (NTRS)

Kessel, Kurt

2011-01-01

The use of conventional tin-lead (SnPb) in circuit board manufacturing is under ever-increasing political scrutiny due to increasing regulations concerning lead. The "Restriction of Hazardous Substances" (RoHS) directive enacted by the European Union (EU) and a pact between the United States National Electronics Manufacturing Initiative (NEMI), Europe's Soldertec at Tin Technology Ltd. and the Japan Electronics and Information Technology Industries Association (JEITA) are just two examples where worldwide legislative actions and partnerships/agreements are affecting the electronics industry. As a result, many global commercial-grade electronic component suppliers are initiating efforts to transition to lead-free (Pb-free) in order to retain their worldwide market. Pb-free components are likely to find their way into the inventory of aerospace or military assembly processes under current government acquisition reform initiatives. Inventories "contaminated" by Pb-free will result in increased risks associated with the manufacturing, product reliability, and subsequent repair of aerospace and military electronic systems. Although electronics for military and aerospace applications are not included in the RoHS legislation, engineers are beginning to find that the commercial industry's move towards RoHS compliance has affected their supply chain and changed their parts. Most parts suppliers plan to phase out their non-compliant, leaded production and many have already done so. As a result, the ability to find leaded components is getting harder and harder. Some buyers are now attempting to acquire the remaining SnPb inventory, if it's not already obsolete. Original Equipment Manufacturers (OEMs), depots, and support contractors have to be prepared to deal with an electronics supply chain that increasingly provides more and more parts with Pb-free finishes-some labeled no differently than their Pb counterparts-while at the same time providing the traditional Pb parts

Continuing Vocational Training in the Space Industry: A Siberian Case Study

ERIC Educational Resources Information Center

Churlyaeva, Natalya; Kukushkin, Sergey

2013-01-01

The development of a continuing vocational training programme at the Information Satellite Systems Joint-Stock Company (ISS JSC) during the transition from the planned Soviet economy to what is now called the Russian market economy is briefly outlined. How the collapse of a planned economy led to the degradation of engineering higher education…

Investigating the Effects of Planning on L2 Text Chat Performance

ERIC Educational Resources Information Center

Hsu, Hsiu-Chen

2012-01-01

Over the last decade, a small body of SLA research has examined the effects of task planning on L2 production. This research has revealed positive results concerning the effect of pre-task and online planning on oral and written production. However, no studies to date have investigated the joint effects of pre-task and online planning. In…

Automated planning of computer assisted mosaic arthroplasty.

PubMed

Inoue, Jiro; Kunz, Manuela; Hurtig, Mark B; Waldman, Stephen D; Stewart, A James

2011-01-01

We describe and evaluate a computer algorithm that automatically develops a surgical plan for computer assisted mosaic arthroplasty, a technically demanding procedure in which a set of osteochondral plugs are transplanted from a non-load-bearing area of the joint to the site of a cartilage defect. We found that the algorithm produced plans that were at least as good as a human expert, had less variability, and took less time.

Direct adaptive control of a PUMA 560 industrial robot

NASA Technical Reports Server (NTRS)

Seraji, Homayoun; Lee, Thomas; Delpech, Michel

1989-01-01

The implementation and experimental validation of a new direct adaptive control scheme on a PUMA 560 industrial robot is described. The testbed facility consists of a Unimation PUMA 560 six-jointed robot and controller, and a DEC MicroVAX II computer which hosts the Robot Control C Library software. The control algorithm is implemented on the MicroVAX which acts as a digital controller for the PUMA robot, and the Unimation controller is effectively bypassed and used merely as an I/O device to interface the MicroVAX to the joint motors. The control algorithm for each robot joint consists of an auxiliary signal generated by a constant-gain Proportional plus Integral plus Derivative (PID) controller, and an adaptive position-velocity (PD) feedback controller with adjustable gains. The adaptive independent joint controllers compensate for the inter-joint couplings and achieve accurate trajectory tracking without the need for the complex dynamic model and parameter values of the robot. Extensive experimental results on PUMA joint control are presented to confirm the feasibility of the proposed scheme, in spite of strong interactions between joint motions. Experimental results validate the capabilities of the proposed control scheme. The control scheme is extremely simple and computationally very fast for concurrent processing with high sampling rates.

A Retrospective on Educational Planning in Comparative Education.

ERIC Educational Resources Information Center

Farrell, Joseph P.

1997-01-01

Defines and broadly traces the history of educational planning in both developing and industrialized capitalist nations. Discusses general approaches to educational planning (technical versus political planning, top-down versus bottom-up planning, and various theoretical bases); the contingency view of planning; case examples of planned,…

Administrative Information Systems Plan for FY89

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1988-11-01

The Administrative Information Systems (AIS) Plan was developed to prioritize, track, and control the cost of AIS activities. This annually published plan, in conjunction with quarterly status reports, measures projected AIS activities and progress. The AIS Plan and quarterly reporting are administered jointly by the Director of Computing and an Organization 30 director. Priority development projects are clearly defined and closely managed efforts that consume significant resources. Directorate supplementals describe other AIS activity within each directorate, which may include: production support; technical support; development activity; and other AIS effort.

Activities of the US-Japan Safety Monitor Joint Working Group

DOE Office of Scientific and Technical Information (OSTI.GOV)

Richard L. Savercool; Lee C. Cadwallader

2004-09-01

This paper documents the activities of the US-Japan exchange in the area of personnel safety at magnetic and laser fusion experiments. A near-miss event with a visiting scientist to the US in 1992 was the impetus for forming the Joint Working Group on Fusion Safety. This exchnge has been under way for over ten years and has provided many safety insights for both US and Japanese facility personnel at national institutes and at universities. The background and activities of the Joint Working Group are described, including the facilities that have been visited for safety walkthroughs, the participants from both countries,more » and the main safety issues examined during visits. Based on these visits, some operational safety ideas to enhance experiment safety are given. The near-term future plans of the Safety Monitor Joint Working group are also discussed.« less

JOBS. A Partnership between Education and Industry.

ERIC Educational Resources Information Center

Mann, Sandra; And Others

This packet contains 15 lessons developed in a workplace basic skills project for the metal casting industry established jointly by Central Alabama Community College and Robinson Foundry, Inc. The lessons cover the following topics: (1) green sand schedule; (2) the core room; (3) the core room (continued); (4) figuring time; (5) the cleaning room;…

An algorithmic interactive planning framework in support of sustainable technologies

NASA Astrophysics Data System (ADS)

Prica, Marija D.

This thesis addresses the difficult problem of generation expansion planning that employs the most effective technologies in today's changing electric energy industry. The electrical energy industry, in both the industrialized world and in developing countries, is experiencing transformation in a number of different ways. This transformation is driven by major technological breakthroughs (such as the influx of unconventional smaller-scale resources), by industry restructuring, changing environmental objectives, and the ultimate threat of resource scarcity. This thesis proposes a possible planning framework in support of sustainable technologies where sustainability is viewed as a mix of multiple attributes ranging from reliability and environmental impact to short- and long-term efficiency. The idea of centralized peak-load pricing, which accounts for the tradeoffs between cumulative operational effects and the cost of new investments, is the key concept in support of long-term planning in the changing industry. To start with, an interactive planning framework for generation expansion is posed as a distributed decision-making model. In order to reconcile the distributed sub-objectives of different decision makers with system-wide sustainability objectives, a new concept of distributed interactive peak load pricing is proposed. To be able to make the right decisions, the decision makers must have sufficient information about the estimated long-term electricity prices. The sub-objectives of power plant owners and load-serving entities are profit maximization. Optimized long-term expansion plans based on predicted electricity prices are communicated to the system-wide planning authority as long-run bids. The long-term expansion bids are cleared by the coordinating planner so that the system-wide long-term performance criteria are satisfied. The interactions between generation owners and the coordinating planning authority are repeated annually. We view the proposed

Randomised controlled trial of joint crisis plans to reduce compulsory treatment for people with psychosis: economic outcomes.

PubMed

Barrett, Barbara; Waheed, Waquas; Farrelly, Simone; Birchwood, Max; Dunn, Graham; Flach, Clare; Henderson, Claire; Leese, Morven; Lester, Helen; Marshall, Max; Rose, Diana; Sutherby, Kim; Szmukler, George; Thornicroft, Graham; Byford, Sarah

2013-01-01

Compulsory admission to psychiatric hospitals may be distressing, disruptive to patients and families, and associated with considerable cost to the health service. Improved patient experience and cost reductions could be realised by providing cost-effective crisis planning services. Economic evaluation within a multi-centre randomised controlled trial comparing Joint Crisis Plans (JCP) plus treatment as usual (TAU) to TAU alone for patients aged over 16, with at least one psychiatric hospital admission in the previous two years and on the Enhanced Care Programme Approach register. JCPs, containing the patient's treatment preferences for any future psychiatric emergency, are a form of crisis intervention that aim to mitigate the negative consequences of relapse, including hospital admission and use of coercion. Data were collected at baseline and 18-months after randomisation. The primary outcome was admission to hospital under the Mental Health Act. The economic evaluation took a service perspective (health, social care and criminal justice services) and a societal perspective (additionally including criminal activity and productivity losses). The addition of JCPs to TAU had no significant effect on compulsory admissions or total societal cost per participant over 18-months follow-up. From the service cost perspective, however, evidence suggests a higher probability (80%) of JCPs being the more cost-effective option. Exploration by ethnic group highlights distinct patterns of costs and effects. Whilst the evidence does not support the cost-effectiveness of JCPs for White or Asian ethnic groups, there is at least a 90% probability of the JCP intervention being the more cost-effective option in the Black ethnic group. The results by ethnic group are sufficiently striking to warrant further investigation into the potential for patient gain from JCPs among black patient groups. Current Controlled Trials ISRCTN11501328.

The characteristics of welded joints for air conditioning application

NASA Astrophysics Data System (ADS)

Weglowski, M. St.; Weglowska, A.; Miara, D.; Kwiecinski, K.; Błacha, S.; Dworak, J.; Rykala, J.; Pikula, J.; Ziobro, G.; Szafron, A.; Zimierska-Nowak, P.; Richert, M.; Noga, P.

2017-10-01

In the paper the results of metallographic examination of welded joints for air-conditioning elements are presented. The European directives 2006/40/EC on the greenhouse gasses elimination demand to stop using traditional refrigerant and to change it to R744 (CO2) medium in air conditioning installation. The R744 refrigerant is environmental friendly medium if compared with standard solution such as R12, R134a or R1234yf and safer for passengers than R1234yf. The non-standard thermodynamic parameters of the R744 which translate into high pressure and high temperature require specific materials to develop the shape and to specify the technology of manufacturing for the particular elements of the conduits and moreover the technologies of joining for the whole structure, which would meet the exploitation requirements of the new air-conditioning system. To produce the test welded joints of stainless steels four different joining technologies were applied: laser welding, plasma welding, electron beam welding as well as high speed rotation welding. This paper describes the influence of the selected welding process on the macrostructure and microstructure of welded joints of AISI 304 and AISI 316L steels. The results indicated that plasma welding laser welding and electron beam welding technologies guaranty the proper quality of welded joints and can be used for the air conditioning application in automotive industry. However, high speed rotation welding not guarantee the good quality of welded joints and cannot be used for above application.

Wyoming's industrial siting permit process and environmental impact assessment

NASA Astrophysics Data System (ADS)

Hyman, Eric L.

1982-01-01

The problem of management of industrial residuals can be reduced through a rational system for siting and planning major industrial facilities. In the United States, Wyoming has moved in the direction of establishing a one-stop permitting system that provides important information for air and water quality planning and solid waste management with a minimum of regulatory overlap. This paper describes Wyoming's Industrial Development Information and Siting Act of 1975 and suggests ways in which the Wyoming permitting system can be improved and applied elsewhere.

Design/analysis of the JWST ISIM bonded joints for survivability at cryogenic temperatures

NASA Astrophysics Data System (ADS)

Bartoszyk, Andrew; Johnston, John; Kaprielian, Charles; Kuhn, Jonathan; Kunt, Cengiz; Rodini, Benjamin; Young, Daniel

2005-08-01

A major design and analysis challenge for the JWST ISIM structure is thermal survivability of metal/composite adhesively bonded joints at the cryogenic temperature of 30K (-405°F). Current bonded joint concepts include internal invar plug fittings, external saddle titanium/invar fittings and composite gusset/clip joints all bonded to hybrid composite tubes (75mm square) made with M55J/954-6 and T300/954-6 prepregs. Analytical experience and design work done on metal/composite bonded joints at temperatures below that of liquid nitrogen are limited and important analysis tools, material properties, and failure criteria for composites at cryogenic temperatures are sparse in the literature. Increasing this challenge is the difficulty in testing for these required tools and properties at cryogenic temperatures. To gain confidence in analyzing and designing the ISIM joints, a comprehensive joint development test program has been planned and is currently running. The test program is designed to produce required analytical tools and develop a composite failure criterion for bonded joint strengths at cryogenic temperatures. Finite element analysis is used to design simple test coupons that simulate anticipated stress states in the flight joints; subsequently, the test results are used to correlate the analysis technique for the final design of the bonded joints. In this work, we present an overview of the analysis and test methodology, current results, and working joint designs based on developed techniques and properties.

Irregular Warfare (IW) Joint Operating Concept (JOC), Version 1.0

DTIC Science & Technology

2007-09-11

disruptive challenges. Key portions of the guidance relating to IW include: • Improving proficiency against irregular challenges. • Redefining past...12 Remarks at the Joint Worldwide Planning Conference, Edelweiss Conference Center Garmisch, Germany, 30 November...Requirements associated with GWOT and IW include: • Steady-state – deter and defend against external transnational terrorist attacks, enable

Joint dynamics of rear- and fore-foot unplanned sidestepping.

PubMed

Donnelly, Cyril J; Chinnasee, Chamnan; Weir, Gillian; Sasimontonkul, Siriporn; Alderson, Jacqueline

2017-01-01

Compare the lower-limb mechanics and anterior cruciate ligament (ACL) injury risk of athletes using a habitual rear-foot (RF) and fore-foot (FF) fall pattern during unplanned sidestepping (UnSS). Experimental cross-sectional. Nineteen elite female field hockey players attended one biomechanical motion capture testing session, which consisted of a random series of pre-planned and unplanned sidestepping sport tasks. Following data collection, participants were classified as possessing a habitual RF or FF fall pattern during UnSS. Hip, knee and ankle joint angles, moments, instantaneous powers and net joint work were calculated during weight acceptance. Between group differences were evaluated using independent sample t-tests (α=0.05). Athletes using a habitual RF fall pattern during UnSS absorbed significantly more work and power through their knee joint (p<0.001), which was coupled with significantly elevated externally applied peak non-sagittal plane peak ankle moments (p<0.05) as well as peak flexion and abduction knee moments (p<0.005). Athletes using a habitual FF fall pattern during UnSS absorbed more power through their ankle joint (p<0.001). A RF fall pattern during UnSS places a large mechanical demand on the knee joint, which is associated with elevated ACL injury risk. Conversely, a FF fall pattern placed a large mechanical demand on the ankle joint. Modifying an athlete's foot fall pattern during UnSS may be viable technique recommendation when returning from knee or ankle injury. Copyright © 2016 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

2017 Joint Annual NDIA/AIA Industrial Security Committee Fall Conference

DTIC Science & Technology

2017-11-15

beyond credit data to offer the insights that government professionals need to make informed decisions and ensure citizen safety, manage compliance...business that provides information technology and professional services. We specialize in managing business processes and systems integration for both... Information Security System ISFD Industrial Security Facilities Database OBMS ODAA Business Management System STEPP Security, Training, Education and

Protection for the U.S. Automobile Industry: A Joint Class Simulation in Trade Policy.

ERIC Educational Resources Information Center

Hess, Peter N.; Ortmayer, Louis M.

A description of a joint class simulation in trade policy undertaken by an international economics class and a political science class at Davidson College (Pennsylvania) is presented in three sections. Section I describes the structure of the simulation. Students were divided into groups of United States auto manufacturers, the United Auto…

Rubbertown NGEM Demonstration Project - Update to Industry

EPA Science Inventory

Follow-up communication to Rubbertown industry group as part of the planning process for the Rubbertown NGEM demonstration study. These slides are for discussion purposes and will not be presented publically beyond the project team and industry group.

Investigation on edge joints of Inconel 625 sheets processed with laser welding

NASA Astrophysics Data System (ADS)

Caiazzo, F.; Alfieri, V.; Cardaropoli, F.; Sergi, V.

2017-08-01

Laser welding of Inconel 625 edge joint beads in square groove configuration was investigated. The use of different weld geometries in new aerospace solutions explains research on edge joints. A structured plan was carried out in order to characterize the process defining the influence of laser power and welding speed and to study possible interactions among the governing factors. As weld pool protection is crucial in order to obtain sound joints when processing superalloys, a special glove box for gas supply was designed to upgrade the welding head. Welded joints were characterized referring to bead profile, microstructure and X-rays. It was found that heat input plays an important role as it affects welding stability, porosity content and bead shape. Results suggest operating with low values of heat input to reduce porosity and guarantee stable bead conformation. Furthermore, a decrease in the grain size has been observed as a consequence of decreasing heat input.

Mechanical Behavior of Dowel-Type Joints Made of Wood Scrimber Composite

PubMed Central

He, Minjuan; Tao, Duo; Li, Zheng; Li, Maolin

2016-01-01

As a renewable building material with low embodied energy characteristics, wood has gained more and more attention in the green and sustainable building industry. In terms of material resource and physical properties, scrimber composite not only makes full use of fast-growing wood species, but also has better mechanical performance and less inherent variability than natural wood material. In this study, the mechanical behavior of bolted beam-to-column joints built with a kind of scrimber composite was investigated both experimentally and numerically. Two groups of specimens were tested under monotonic and low frequency cyclic loading protocols. The experimental results showed that the bolted joints built with scrimber composite performed well in initial stiffness, ductility, and energy dissipation. A three-dimensional (3D) non-linear finite element model (FEM) for the bolted beam-to-column joints was then developed and validated by experimental results. The validated model was further used to investigate the failure mechanism of the bolted joints through stress analysis. This study can contribute to the application of the proposed scrimber composite in structural engineering, and the developed FEM can serve as a useful tool to evaluate the mechanical behavior of such bolted beam-to-column joints with different configurations in future research. PMID:28773703

Mechanical Behavior of Dowel-Type Joints Made of Wood Scrimber Composite.

PubMed

He, Minjuan; Tao, Duo; Li, Zheng; Li, Maolin

2016-07-15

As a renewable building material with low embodied energy characteristics, wood has gained more and more attention in the green and sustainable building industry. In terms of material resource and physical properties, scrimber composite not only makes full use of fast-growing wood species, but also has better mechanical performance and less inherent variability than natural wood material. In this study, the mechanical behavior of bolted beam-to-column joints built with a kind of scrimber composite was investigated both experimentally and numerically. Two groups of specimens were tested under monotonic and low frequency cyclic loading protocols. The experimental results showed that the bolted joints built with scrimber composite performed well in initial stiffness, ductility, and energy dissipation. A three-dimensional (3D) non-linear finite element model (FEM) for the bolted beam-to-column joints was then developed and validated by experimental results. The validated model was further used to investigate the failure mechanism of the bolted joints through stress analysis. This study can contribute to the application of the proposed scrimber composite in structural engineering, and the developed FEM can serve as a useful tool to evaluate the mechanical behavior of such bolted beam-to-column joints with different configurations in future research.

Flat H Frangible Joint Evolution

NASA Technical Reports Server (NTRS)

Diegelman, Thomas E.; Hinkel, Todd J.; Benjamin, Andrew; Rochon, Brian V.; Brown, Christopher W.

2016-01-01

Space vehicle staging and separation events require pyrotechnic devices. They are single-use mechanisms that cannot be tested, nor can failure-tolerant performance be demonstrated in actual flight articles prior to flight use. This necessitates the implementation of a robust design and test approach coupled with a fully redundant, failure-tolerant explosive mechanism to ensure that the system functions even in the event of a single failure. Historically, NASA has followed the single failure-tolerant (SFT) design philosophy for all human-rated spacecraft, including the Space Shuttle Program. Following the end of this program, aerospace companies proposed building the next generation human-rated vehicles with off-the-shelf, non-redundant, zero-failure-tolerant (ZFT) separation systems. Currently, spacecraft and launch vehicle providers for both the Orion and Commercial Crew Programs (CCPs) plan to deviate from the heritage safety approach and NASA's SFT human rating requirements. Both programs' partners have base-lined ZFT frangible joints for vehicle staging and fairing separation. These joints are commercially available from pyrotechnic vendors. Non-human-rated missions have flown them numerous times. The joints are relatively easy to integrate structurally within the spacecraft. In addition, the separation event is debris free, and the resultant pyro shock is lower than that of other design solutions. It is, however, a serious deficiency to lack failure tolerance. When used for critical applications on human-rated vehicles, a single failure could potentially lead to loss of crew (LOC) or loss of mission (LOM)). The Engineering and Safety & Mission Assurance directorates within the NASA Johnson Space Center took action to address this safety issue by initiating a project to develop a fully redundant, SFT frangible joint design, known as the Flat H. Critical to the ability to retrofit on launch vehicles being developed, the SFT mechanisms must fit within the same

Modelling the strength of an aluminium-steel nailed joint

NASA Astrophysics Data System (ADS)

Goldspiegel, Fabien; Mocellin, Katia; Michel, Philippe

2018-05-01

For multi-material applications in automotive industry, a cast aluminium (upper layer) and dual-phase steel (lower layer) superposition joined with High-Speed Nailing process is investigated through an experimental vs numerical framework. Using FORGE® finite-element software, results from joining simulations have been inserted into models in charge of nailed-joint mechanical testings. Numerical Shear and Cross-tensile tests are compared to experimental ones to discuss discrepancy and possible improvements.

JESS facility modification and environmental/power plans

NASA Technical Reports Server (NTRS)

Bordeaux, T. A.

1984-01-01

Preliminary plans for facility modifications and environmental/power systems for the JESS (Joint Exercise Support System) computer laboratory and Freedom Hall are presented. Blueprints are provided for each of the facilities and an estimate of the air conditioning requirements is given.

Periprosthetic joint infection: are patients with multiple prosthetic joints at risk?

PubMed

Jafari, S Mehdi; Casper, David S; Restrepo, Camilo; Zmistowski, Benjamin; Parvizi, Javad; Sharkey, Peter F

2012-06-01

Patients who present with a periprosthetic joint infection in a single joint may have multiple prosthetic joints. The risk of these patients developing a subsequent infection in another prosthetic joint is unknown. Our purposes were (1) to identify the risk of developing a subsequent infection in another prosthetic joint and (2) to describe the time span and organism profile to the second prosthetic infection. We retrospectively identified 55 patients with periprosthetic joint infection who had another prosthetic joint in place at the time of presentation. Of the 55 patients, 11 (20%) developed a periprosthetic joint infection in a second joint. The type of organism was the same as the first infection in 4 (36%) of 11 patients. The time to developing a second infection averaged 2.0 years (range, 0-6.9 years). Copyright © 2012 Elsevier Inc. All rights reserved.

Gen. Paul J. Selva > Joint Chiefs of Staff > Article View

Science.gov Websites

aircraft systems and executive officer, Deputy Chief of Staff, Plans and Resources, Headquarters Strategic Facebook on Flickr Joint Chiefs Army Chief of Staff Marine Corps Commandant Chief of Naval Operations Air Force Chief of Staff Chief of National Guard Bureau Biographies Directorates Directorates of Management

Gulf of Mexico Gas Hydrate Joint Industry Project Leg II: Results from the Walker Ridge 313 Site

NASA Astrophysics Data System (ADS)

Shedd, W.; Frye, M.; Boswell, R. M.; Collett, T. S.; McConnell, D.; Jones, E.; Shelander, D.; Dai, J.; Guerin, G.; Cook, A.; Mrozewski, S.; Godfriaux, P. D.; Dufrene, R.; Hutchinson, D. R.; Roy, R.

2009-12-01

The Gulf of Mexico Gas Hydrate Joint Industry Project Leg II drilling program visited three sites in the Gulf of Mexico during a 21 day drilling program in April and May, 2009. Using both petroleum systems and seismic stratigraphic approaches, the exploration focus for Leg II was to identify sites with the potential for gas hydrate-saturated sand reservoirs. The data acquired consist of a comprehensive suite of high resolution LWD logs including gamma ray, density, porosity, sonic, and resistivity tools. No physical samples were taken in the field. Two holes, locations G and H, were drilled at the Walker Ridge 313 site (WR 313)in the central Gulf of Mexico, just updip of the “salt sheet province”. The primary objective of each well was to determine the presence or absence of gas hydrate from the log data at the predetermined primary targets, picked from industry 3-D seismic data, in dipping Pleistocene turbidite derived sands on the flanks of a salt withdrawal minibasin. The seismic targets were high amplitude positive reflections just updip of phase reversals at the interpreted base of hydrate stability, corresponding to the so-called bottom simulating reflector, or “BSR”. Downdip of the BSR, the sands were clearly troughs, or negative reflections, suggesting free gas charge. An existing industry well, located updip of both JIP locations, contains a slightly sandy zone in the same stratigraphic interval as the JIP targets, that has elevated resistivities correlated to the target sands, suggesting low saturation “shows” of hydrate. Stratigraphically bounded fractured fine grained sediments with probable gas hydrate fill were found in both holes between 800 ft and 1300 ft at G, and between 600 ft and 1000 ft below the seafloor at H. At the primary targets, high saturation gas hydrates in sand were interpreted from logs at both holes. LWD data indicate 50 ft of high saturation gas hydrate in sands starting at 2722 ft below seafloor at the G hole. At H, 37

Tennessee long-range transportation plan : aviation system plan update

DOT National Transportation Integrated Search

2005-01-01

This plan update is streamlined in nature and will only consider the ttates six commercial service airports and 14 regional airports. The tasks completed for this update included an inventory of facilities, aviation industry review, review and upd...

Force Structure. Joint Seabasing Would Benefit from a Comprehensive Management Approach and Rigorous Experimentation before Services Spend Billions on New Capabilities

DTIC Science & Technology

2007-01-01

results could be compromised. While service development efforts tied to seabasing are approaching milestones for investment decisions , it is...estimates for joint seabasing options are developed and made transparent to DOD and Congress, decision makers will not be able to evaluate the cost...Integrate Service Initiatives 10 DOD Has Not Developed a Joint Experimentation Campaign Plan to Inform Decisions About Joint Seabasing 16 Timeframe for

New Norwegian HSE standard for the offshore industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huse, J.R.

1996-12-31

NORSOK (The competitive standing of the Norwegian offshore sector) is the Norwegian industry initiative to add value, reduce cost and lead time and remove unnecessary activities in offshore field developments and operations. The NORSOK standards are developed by the Norwegian petroleum industry as a part of the NORSOK initiative and are jointly issued by the Norwegian Oil Industry Association and the Federation of Norwegian Engineering Industries. The purpose of the industry standard is to replace the individual oil company specifications for use in existing and future petroleum industry developments, subject to the individual company`s review and application. The NORSOK Health,more » Safety and Environment (HSE) standards covers: Technical Safety, Working Environment, Environmental Care, HSE during Construction. The standards are now being used in ongoing offshore development projects, and the experience with standards shows that the principle aim is being met. The development of standards continues, implementing experience gained.« less

Kinematics Simulation Analysis of Packaging Robot with Joint Clearance

NASA Astrophysics Data System (ADS)

Zhang, Y. W.; Meng, W. J.; Wang, L. Q.; Cui, G. H.

2018-03-01

Considering the influence of joint clearance on the motion error, repeated positioning accuracy and overall position of the machine, this paper presents simulation analysis of a packaging robot — 2 degrees of freedom(DOF) planar parallel robot based on the characteristics of high precision and fast speed of packaging equipment. The motion constraint equation of the mechanism is established, and the analysis and simulation of the motion error are carried out in the case of turning the revolute clearance. The simulation results show that the size of the joint clearance will affect the movement accuracy and packaging efficiency of the packaging robot. The analysis provides a reference point of view for the packaging equipment design and selection criteria and has a great significance on the packaging industry automation.

Stability and Change in Mother-Child Planning over Middle Childhood

ERIC Educational Resources Information Center

Gauvain, Mary; Perez, Susan M.; Reisz, Z.

2018-01-01

This longitudinal research examines maternal and child behaviors during joint planning over a 3-year period of middle childhood. 118 mother-child dyads were observed once a year beginning when the children were 8 years of age. Coding focused on mother and child planning behaviors, maternal instructional support, and child task engagement.…

40 CFR 62.650 - Identification of plan.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Existing Commercial/industrial Solid Waste Incineration Units § 62.650 Identification of plan. (a) The... are no existing commercial/industrial solid waste incineration units within the Department's.../industrial solid waste incineration units within the Department's jurisdiction that are subject to 40 CFR...

40 CFR 62.650 - Identification of plan.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Existing Commercial/industrial Solid Waste Incineration Units § 62.650 Identification of plan. (a) The... are no existing commercial/industrial solid waste incineration units within the Department's.../industrial solid waste incineration units within the Department's jurisdiction that are subject to 40 CFR...

Numerical modeling of friction welding of bi-metal joints for electrical applications

NASA Astrophysics Data System (ADS)

Velu, P. Shenbaga; Hynes, N. Rajesh Jesudoss

2018-05-01

In the manufacturing industries, and more especially in electrical engineering applications, the usage of non-ferrous materials plays a vital role. Today's engineering applications relies upon some of the significant properties such as a good corrosion resistance, mechanical properties, good heat conductivity and higher electrical conductivity. Copper-aluminum bi-metal joint is one such combination that meets the demands requirements for electrical applications. In this work, the numerical simulation of AA 6061 T6 alloy/Copper was carried out under joining conditions. By using this developed model, the temperature distribution along the length of the dissimilar joint is predicted and the time-temperature profile has also been generated. Besides, a Finite Element Model has been developed by using the numerical simulation Tool "ABAQUS". This developed FEM is helpful in predicting various output parameters during friction welding of this dissimilar joint combination.

Seal Joint Analysis and Design for the Ares-I Upper Stage LOX Tank

NASA Technical Reports Server (NTRS)

Phillips, Dawn R.; Wingate, Robert J.

2011-01-01

The sealing capability of the Ares-I Upper Stage liquid oxygen tank-to-sump joint is assessed by analyzing the deflections of the joint components. Analyses are performed using three-dimensional symmetric wedge finite element models and the ABAQUS commercial finite element software. For the pressure loads and feedline interface loads, the analyses employ a mixed factor of safety approach to comply with the Constellation Program factor of safety requirements. Naflex pressure-assisted seals are considered first because they have been used successfully in similar seal joints in the Space Shuttle External Tank. For the baseline sump seal joint configuration with a Naflex seal, the predicted joint opening greatly exceeds the seal design specification. Three redesign options of the joint that maintain the use of a Naflex seal are studied. The joint openings for the redesigned seal joints show improvement over the baseline configuration; however, these joint openings still exceed the seal design specification. RACO pressure-assisted seals are considered next because they are known to also be used on the Space Shuttle External Tank, and the joint opening allowable is much larger than the specification for the Naflex seals. The finite element models for the RACO seal analyses are created by modifying the models that were used for the Naflex seal analyses. The analyses show that the RACO seal may provide sufficient sealing capability for the sump seal joint. The results provide reasonable data to recommend the design change and plan a testing program to determine the capability of RACO seals in the Ares-I Upper Stage liquid oxygen tank sump seal joint.

“Our Reach Is Wide by Any Corporate Standard”: How the Tobacco Industry Helped Defeat the Clinton Health Plan and Why It Matters Now

PubMed Central

Tesler, Laura E.

2010-01-01

Contemporary health care reformers, like those who promoted the failed Clinton era plan, face opposition from multiple corporate interests. However, scant literature has examined how relationships between corporations and other stakeholders, such as think tanks and advocacy groups, shape health care reform debate. We show how the 2 biggest US tobacco companies, Philip Morris and RJ Reynolds, and their trade association coordinated in mobilizing ideologically diverse constituencies to help defeat the Clinton plan. Unwittingly perhaps, some reform supporters advanced the tobacco industry's public relations blitz, contributing to perceptions of public opposition to the plan. As the current reform debate unfolds, this case highlights the importance of funding transparency for interpreting the activities of think tanks, advocacy groups, and “grassroots” movements. PMID:20466958

Assessment of US industry's technology trends and new technology requirements

NASA Technical Reports Server (NTRS)

1984-01-01

The utility and effectiveness of a novel approach (the Applications Development, or AD approach), intended to augment the efficiency of NASA's technology utilization (TU) through dissemination of NASA technologies and joint technology development efforts with U.S. industry is tested. The innovative AD approach consists of the following key elements: selection of NASA technologies appearing to have leading edge attributes; interaction with NASA researchers to assess the characteristics and quality of each selected technology; identification of industry's needs in the selected technology areas; structuring the selected technologies in terms of specifications and standards familiar to industry (industrial Spec. Sheets); identification and assessment of industry's interest in the specific selected NASA technologies, utilizing the greatly facilitated communication made possible by the availability of the industrial Spec. Sheets; and matching selected NASA technologies with the needs of selected industries.

Ten-year space launch technology plan

NASA Technical Reports Server (NTRS)

1992-01-01

This document is the response to the National Space Policy Directive-4 (NSPD-4), signed by the President on 10 Jul. 1991. Directive NSPD-4 calls upon the Department of Defense (DoD), the Department of Energy (DOE), and the National Aeronautics and Space Administration (NASA) to coordinate national space launch technology efforts and to jointly prepare a 10-year space launch technology plan. The nation's future in space rests on the strength of its national launch technology program. This plan documents our current launch technology efforts, plans for future initiatives in this arena, and the overarching philosophy that links these activities into an integrated national technology program.

Project Helios-A. [mission planning for solar probe

NASA Technical Reports Server (NTRS)

1974-01-01

The Helios-A solar probe which will fly within 28 million miles of the sun is described as a joint American and German project. The spacecraft and instrument designs, planned experiments, and mission are briefly discussed.

[Juvenile rheumatoid diseases: Endoprosthetic care of destroyed hip joints].

PubMed

Rehart, S; Henniger, M

2015-07-01

Patients with juvenile idiopathic arthritis (JIA) often suffer from involvement of the hip joints, with joint destruction and related functional limitations, making hip replacement necessary. To discover what special features are to be expected in patients with JIA and hip arthroplasty and what impact they have on surgical indication, choice of implant, and technique. Selective literature review and evaluation of our patient population. Compared with osteoarthritis patients, JIA patients are on average much younger at the time of hip replacement. Owing to the onset of the disease in childhood or adolescence and the frequent glucocorticoid therapy, growth disorders or abnormal anatomical findings are common in these patients. Bone density is often reduced at an early age. The perioperative management of medication has to be planned. Special implants for patients with rheumatic diseases do not exist, but the above peculiarities of this group of patients should be considered for surgical procedure and choice of implant and material. Overall, the results of hip arthroplasty in juvenile rheumatic diseases, in terms of pain relief and functional improvement, are good. The limited life of the arthroplasty is problematic. By relieving pain, improvement of the range of motion and activity level very high patient satisfaction is usually achieved by hip arthroplasty in JIA patients. In the case of involvement of the contralateral hip or the ipsilateral knee joint it may be useful to perform a simultaneous, single-stage joint replacement of both joints.

Design and technology parameters influence on durability for heat exchangers tube to tubesheet joints

NASA Astrophysics Data System (ADS)

Ripeanu, R. G.

2017-02-01

The main failures of heat exchangers are: corrosion of tubes and jacket, tubes blockage and failures of tube to tubesheet joints also by corrosion. The most critical zone is tube to tubesheet joints. Depending on types of tube to tubesheet joints, in order to better respect conditions of tension and compression, this paper analyses the tubesheet holes shapes, smooth and with a grove, on corrosion behavior. In the case of welding tubes with tubesheet, welding parameters modify corrosion behavior. Were realized welded joints by three welding regimes and tested at corrosion in two media, tap water and industrial water. Were tested also samples made of smooth tubes, finned tubes and tubes coated with a passive product as applied by a heat exchanger manufacturer. For all samples, the roughness parameters were measured, before and after the corrosion tests. The obtained corrosion rates show that stress values and their distribution along the joint modify the corrosion behavior. The optimum welding parameters were established in order to increase the joint durability. The paper has shown that passive product used is not proper chosen and the technology of obtaining rolled thread pipes diminishes tubes’ durability by increasing the corrosion rate.

Workplace Basic Skills in the Metal Casting Industry for World Class Process and Technology.

ERIC Educational Resources Information Center

Rasmussen, Bonnie

A workplace basic skills project for the metal casting industry was established jointly by Central Alabama Community College and Robinson Foundry, Inc. Evaluation of the project was made through a commercial test of hourly workers' general literacy level gains, instructor-developed pre- and posttests of mastery of the industrial process and…

Impact extractive fracture of jointed steel plates of a bolted joint

NASA Astrophysics Data System (ADS)

Daimaruya, M.; Fujiki, H.; Ambarita, H.

2012-08-01

This study is concerned with the development of a fracture criterion for the impact fracture of jointed steel plates of a bolted joint used in a car body. For the accurate prediction of crash characteristics of car bodies by computer-aided engineering (CAE), it is also necessary to examine the behavior and fracture of jointed steel plates subjected to impact loads. Although the actual impact fracture of jointed steel plates of a bolted joint used in cars is complicated, for simplifying the problem it might be classified into the shear fracture and the extractive fracture of jointed steel plates. Attention is given to the extractive fracture of jointed steel plates in this study. The extractive behavior and fracture of three kinds of steel plates used for cars are examined in experiments and numerical simulations. The impact extraction test of steel plates jointed by a bolt is performed using the one-bar method, together with the static test. In order to understand the mechanism of extractive fracture process of jointed steel plates, numerical simulations by a FEM code LS-DYNA are also carried out. The obtained results suggest that a stress-based fracture criterion may be developed for the impact extractive fracture of jointed steel plates of a bolted joint used in a car body.

Greenville ISD. Integrated Lesson Plans.

ERIC Educational Resources Information Center

East Texas State Univ., Commerce. Educational Development and Training Center.

This packet contains nine lesson plans for integrated academic and vocational education courses. Lesson plans for the following courses are included: industrial technology, automotive technology, English, mathematical applications, science, home economics, and mathematics. Some of the topics covered are as follows: mechanical drawing, automobile…

Austin ISD. Integrated Lesson Plans.

ERIC Educational Resources Information Center

East Texas State Univ., Commerce. Educational Development and Training Center.

This packet contains 14 lesson plans for integrated academic and vocational education courses. Lesson plans for the following courses are included: integrated physics and principles of technology; algebra and principles of technology; principles of technology, language arts, and economics; physics and industrial electronics; physics and…

Methodological factors affecting joint moments estimation in clinical gait analysis: a systematic review.

PubMed

Camomilla, Valentina; Cereatti, Andrea; Cutti, Andrea Giovanni; Fantozzi, Silvia; Stagni, Rita; Vannozzi, Giuseppe

2017-08-18

Quantitative gait analysis can provide a description of joint kinematics and dynamics, and it is recognized as a clinically useful tool for functional assessment, diagnosis and intervention planning. Clinically interpretable parameters are estimated from quantitative measures (i.e. ground reaction forces, skin marker trajectories, etc.) through biomechanical modelling. In particular, the estimation of joint moments during motion is grounded on several modelling assumptions: (1) body segmental and joint kinematics is derived from the trajectories of markers and by modelling the human body as a kinematic chain; (2) joint resultant (net) loads are, usually, derived from force plate measurements through a model of segmental dynamics. Therefore, both measurement errors and modelling assumptions can affect the results, to an extent that also depends on the characteristics of the motor task analysed (i.e. gait speed). Errors affecting the trajectories of joint centres, the orientation of joint functional axes, the joint angular velocities, the accuracy of inertial parameters and force measurements (concurring to the definition of the dynamic model), can weigh differently in the estimation of clinically interpretable joint moments. Numerous studies addressed all these methodological aspects separately, but a critical analysis of how these aspects may affect the clinical interpretation of joint dynamics is still missing. This article aims at filling this gap through a systematic review of the literature, conducted on Web of Science, Scopus and PubMed. The final objective is hence to provide clear take-home messages to guide laboratories in the estimation of joint moments for the clinical practice.

Natural Resource Management Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Green, T.; Schwager, K.

This comprehensive Natural Resource Management Plan (NRMP) for Brookhaven National Laboratory (BNL) was built on the successful foundation of the Wildlife Management Plan for BNL, which it replaces. This update to the 2003 plan continues to build on successes and efforts to better understand the ecosystems and natural resources found on the BNL site. The plan establishes the basis for managing the varied natural resources located on the 5,265-acre BNL site, setting goals and actions to achieve those goals. The planning of this document is based on the knowledge and expertise gained over the past 15 years by the Naturalmore » Resources management staff at BNL in concert with local natural resource agencies including the New York State Department of Environmental Conservation, Long Island Pine Barrens Joint Planning and Policy Commission, The Nature Conservancy, and others. The development of this plan works toward sound ecological management that not only benefits BNL’s ecosystems but also benefits the greater Pine Barrens habitats in which BNL is situated. This plan applies equally to the Upton Ecological and Research Reserve (Upton Reserve). Any difference in management between the larger BNL area and the Upton Reserve are noted in the text.« less

Design and technical support for development of a molded fabric space suit joint

NASA Technical Reports Server (NTRS)

Olson, L. Howard

1994-01-01

NASA Ames Research Center has under design a new joint or element for use in a space suit. The design concept involves molding a fabric to a geometry developed at Ames. Unusual characteristics of this design include the need to produce a fabric molding draw ratio on the order of thirty percent circumferentially on the surface. Previous work done at NASA on molded fabric joints has shown that standard, NASA qualified polyester fabrics as are currently available in the textile industry for use in suits have a maximum of about fifteen percent draw ratio. NASA has done the fundamental design for a prototype joint and of a mold which would impart the correct shape to the fabric support layer of the joint. NASA also has the capability to test a finished product for suitability and reliability. Responsibilities resting with Georgia Tech in the design effort for this project are textile related, namely fiber selection, fabric design to achieve the properties of the objective design, and determining production means and sources for the fabrics. The project goals are to produce a prototype joint using the NASA design for evaluation of effectiveness by NASA, and to establish the sources and specifications which would allow reliable and repeatable production of the joint.

MULTI-MEDIA ASSISTANCE GUIDE FOR THE AMMONIA REFRIGERATION INDUSTRY

EPA Science Inventory

Multi-media Compliance Assistance Guide for the Ammonia Refrigeration Industry Both EPA and the Wharton School of Business have analyzed EPA = s Risk Management Plan (RMP) data on the chemical accident history of different industries. Nationally, the industry that was found to ...

Planning Paths Through Singularities in the Center of Mass Space

NASA Technical Reports Server (NTRS)

Doggett, William R.; Messner, William C.; Juang, Jer-Nan

1998-01-01

The center of mass space is a convenient space for planning motions that minimize reaction forces at the robot's base or optimize the stability of a mechanism. A unique problem associated with path planning in the center of mass space is the potential existence of multiple center of mass images for a single Cartesian obstacle, since a single center of mass location can correspond to multiple robot joint configurations. The existence of multiple images results in a need to either maintain multiple center of mass obstacle maps or to update obstacle locations when the robot passes through a singularity, such as when it moves from an elbow-up to an elbow-down configuration. To illustrate the concepts presented in this paper, a path is planned for an example task requiring motion through multiple center of mass space maps. The object of the path planning algorithm is to locate the bang- bang acceleration profile that minimizes the robot's base reactions in the presence of a single Cartesian obstacle. To simplify the presentation, only non-redundant robots are considered and joint non-linearities are neglected.

Welding technology transfer task/laser based weld joint tracking system for compressor girth welds

NASA Technical Reports Server (NTRS)

Looney, Alan

1991-01-01

Sensors to control and monitor welding operations are currently being developed at Marshall Space Flight Center. The laser based weld bead profiler/torch rotation sensor was modified to provide a weld joint tracking system for compressor girth welds. The tracking system features a precision laser based vision sensor, automated two-axis machine motion, and an industrial PC controller. The system benefits are elimination of weld repairs caused by joint tracking errors which reduces manufacturing costs and increases production output, simplification of tooling, and free costly manufacturing floor space.

Joint Instability and Osteoarthritis

PubMed Central

Blalock, Darryl; Miller, Andrew; Tilley, Michael; Wang, Jinxi

2015-01-01

Joint instability creates a clinical and economic burden in the health care system. Injuries and disorders that directly damage the joint structure or lead to joint instability are highly associated with osteoarthritis (OA). Thus, understanding the physiology of joint stability and the mechanisms of joint instability-induced OA is of clinical significance. The first section of this review discusses the structure and function of major joint tissues, including periarticular muscles, which play a significant role in joint stability. Because the knee, ankle, and shoulder joints demonstrate a high incidence of ligament injury and joint instability, the second section summarizes the mechanisms of ligament injury-associated joint instability of these joints. The final section highlights the recent advances in the understanding of the mechanical and biological mechanisms of joint instability-induced OA. These advances may lead to new opportunities for clinical intervention in the prevention and early treatment of OA. PMID:25741184

Joint instability and osteoarthritis.

PubMed

Blalock, Darryl; Miller, Andrew; Tilley, Michael; Wang, Jinxi

2015-01-01

Joint instability creates a clinical and economic burden in the health care system. Injuries and disorders that directly damage the joint structure or lead to joint instability are highly associated with osteoarthritis (OA). Thus, understanding the physiology of joint stability and the mechanisms of joint instability-induced OA is of clinical significance. The first section of this review discusses the structure and function of major joint tissues, including periarticular muscles, which play a significant role in joint stability. Because the knee, ankle, and shoulder joints demonstrate a high incidence of ligament injury and joint instability, the second section summarizes the mechanisms of ligament injury-associated joint instability of these joints. The final section highlights the recent advances in the understanding of the mechanical and biological mechanisms of joint instability-induced OA. These advances may lead to new opportunities for clinical intervention in the prevention and early treatment of OA.

75 FR 41157 - Stanford University Habitat Conservation Plan; Extension of Comment Period

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-15

... Fish and Wildlife Service RIN 0648-XX52 Stanford University Habitat Conservation Plan; Extension of... extending the comment period for our joint request for comments on the Stanford University Habitat... issued Stanford University Habitat Conservation Plan, a DEIS for Authorization of Incidental Take and...

Industrial Education Guide for Elementary and Secondary Program Development and Improvement in Industrial Arts, K-12.

ERIC Educational Resources Information Center

South Dakota State Div. of Elementary and Secondary Education, Pierre.

This guide for a model industrial arts curriculum for state and local planning has been designed for public school administrators and teachers who wish to establish an industrial arts curriculum in their school or would like to expand an existing one. Covering levels K-12, the guide first suggests a program by operational levels. It then outlines…

40 CFR 62.13108 - Identification of plan.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Industrial Solid Waste Incineration Units. The State Plan includes revisions to Rule 102 and Rule 405 of the... Industrial Solid Waste Incineration Units for which construction commenced on or before November 30, 1999... Control of Air Emissions of Designated Pollutants from Existing Commercial and Industrial Solid Waste...

The Role of Prison Industries Now and in the Future: A Planning Study.

ERIC Educational Resources Information Center

Georgetown Univ. Law Center, Washington, DC. Inst. of Criminal Law and Procedure.

The Institute of Criminal Law and Procedure analyzes the merits, limitiations, and problems of various approaches to prison industry and recommends measures and programs to improve industries. Federal and State legislation affecting prison industries were examined, several prison industries were visited, and the literature of prison industries was…

Shoulder joint loading and posture during medicine cart pushing task.

PubMed

Xu, Xu; Lin, Jia-Hua; Boyer, Jon

2013-01-01

Excessive physical loads and awkward shoulder postures during pushing and pulling are risk factors for shoulder pain. Pushing a medicine cart is a major component of a work shift for nurses and medical assistants in hospitals and other health care facilities. A laboratory experiment was conducted to examine the effects of common factors (e.g., lane congestion, cart load stability, floor surface friction) on shoulder joint moment and shoulder elevation angle of participants during cart pushing. Participants pushed a medicine cart on straight tracks and turning around right-angle corners. Peak shoulder joint moments reached 25.1 Nm, 20.3 Nm, and 26.8 Nm for initial, transition, and turning phases of the pushing tasks, indicating that shoulder joint loading while pushing a medical cart is comparable to levels previously reported from heavy manual activities encountered in industry (e.g., garbage collection). Also, except for user experience, all other main study factors, including congestion level, cart load stability, location of transition strip, shoulder tendency, surface friction, and handedness, significantly influenced shoulder joint moment and shoulder elevation angle. The findings provide a better understanding of shoulder exposures associated with medicine cart operations and may be helpful in designing and optimizing the physical environment where medicine carts are used.

40 CFR 62.3660 - Identification of plan.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS Indiana Control of Air Emissions from Existing Commercial and Industrial Solid Waste Incinerator Units § 62.3660 Identification of plan. On December 20, 2002, Indiana submitted a plan to control emissions from Commercial and...

77 FR 30900 - Approval and Promulgation of Implementation Plans; New Mexico; Albuquerque/Bernalillo County...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-24

... in implementing the New Mexico Air Quality Control Act, the joint Air Quality Control Board (AQCB... Department in implementing the New Mexico Air Quality Control Act, the joint Air Quality Control Board (AQCB... Promulgation of Implementation Plans; New Mexico; Albuquerque/Bernalillo County; Fees for Permits and...

Designing and validating the joint battlespace infosphere

NASA Astrophysics Data System (ADS)

Peterson, Gregory D.; Alexander, W. Perry; Birdwell, J. Douglas

2001-08-01

Fielding and managing the dynamic, complex information systems infrastructure necessary for defense operations presents significant opportunities for revolutionary improvements in capabilities. An example of this technology trend is the creation and validation of the Joint Battlespace Infosphere (JBI) being developed by the Air Force Research Lab. The JBI is a system of systems that integrates, aggregates, and distributes information to users at all echelons, from the command center to the battlefield. The JBI is a key enabler of meeting the Air Force's Joint Vision 2010 core competencies such as Information Superiority, by providing increased situational awareness, planning capabilities, and dynamic execution. At the same time, creating this new operational environment introduces significant risk due to an increased dependency on computational and communications infrastructure combined with more sophisticated and frequent threats. Hence, the challenge facing the nation is the most effective means to exploit new computational and communications technologies while mitigating the impact of attacks, faults, and unanticipated usage patterns.

Preoperative Planning of Orthopedic Procedures using Digitalized Software Systems.

PubMed

Steinberg, Ely L; Segev, Eitan; Drexler, Michael; Ben-Tov, Tomer; Nimrod, Snir

2016-06-01

The progression from standard celluloid films to digitalized technology led to the development of new software programs to fulfill the needs of preoperative planning. We describe here preoperative digitalized programs and the variety of conditions for which those programs can be used to facilitate preparation for surgery. A PubMed search using the keywords "digitalized software programs," "preoperative planning" and "total joint arthroplasty" was performed for all studies regarding preoperative planning of orthopedic procedures that were published from 1989 to 2014 in English. Digitalized software programs are enabled to import and export all picture archiving communication system (PACS) files (i.e., X-rays, computerized tomograms, magnetic resonance images) from either the local working station or from any remote PACS. Two-dimension (2D) and 3D CT scans were found to be reliable tools with a high preoperative predicting accuracy for implants. The short learning curve, user-friendly features, accurate prediction of implant size, decreased implant stocks and low-cost maintenance makes digitalized software programs an attractive tool in preoperative planning of total joint replacement, fracture fixation, limb deformity repair and pediatric skeletal disorders.

Chemistry in Action: How to Plan a Visit to the Chemical Industry.

ERIC Educational Resources Information Center

Nae, Hemi; And Others

1982-01-01

Presents guidelines for field trips to chemical industries. Includes examples of objectives, administrative aspects (time off from school, contact persons, transportation, pre/post-trip discussions, and guides at the industrial facility). Includes an evaluation of trips taken to industrial plants in Israel. (JN)

The hindlimb in walking horses: 2. Net joint moments and joint powers.

PubMed

Clayton, H M; Hodson, E; Lanovaz, J L; Colborne, G R

2001-01-01

The objective of the study was to describe net joint moments and joint powers in the equine hindlimb during walking. The subjects were 5 sound horses. Kinematic and force data were collected synchronously and combined with morphometric information to determine net joint moments at each hindlimb joint throughout stance and swing. The results showed that the net joint moment was on the caudal/plantar side of all hindlimb joints at the start of stance when the limb was being actively retracted. It moved to the cranial/dorsal side around 24% stride at the hip and stifle and in terminal stance at the more distal joints. It remained on the cranial/dorsal side of all joints during the first half of swing to provide active limb protraction, then moved to the caudal/plantar aspect to reverse the direction of limb motion prior to ground contact. The hip joint was the main source of energy generation throughout the stride. It was assisted by the tarsal joint in both stance and swing phases and by the fetlock joint during the stance phase. The coffin joint acted as an energy damper during stance, whereas the stifle joint absorbed almost equal amounts of energy in the stance and swing phases. The coffin and fetlock joints absorbed energy as the limb was protracted and retracted during the swing phase, suggesting that their movements were driven by inertial forces. Future studies will apply these findings to detect changes in the energy profiles due to specific soft tissue injuries.

Industrial application experiment series

NASA Technical Reports Server (NTRS)

Bluhm, S. A.

1980-01-01

The deployment of parabolic dish systems into the industrial sector for the purpose of providing users, suppliers, sponsors, and developers with a realistic assessment of system feasibility in selected near-term industrial applications will be accomplished initially through the industrial module experiment and later through additional experiments involving thermal, electric, and combined thermal and electrical systems. The approach is to progress through steps, from single module to multi-module systems, from thermal-only applications to more complex combined thermal and electric applications. The experience of other solar thermal experiments, particularly those involving parabolic dish hardware, will be utilized to the fullest extent possible in experiment planning and implementation.

Scientific results from Gulf of Mexico Gas Hydrates Joint Industry Project Leg 1 drilling: Introduction and overview

USGS Publications Warehouse

Ruppel, C.; Boswell, R.; Jones, E.

2008-01-01

The Gulf of Mexico Gas Hydrates Joint Industry Project (JIP) is a consortium of production and service companies and some government agencies formed to address the challenges that gas hydrates pose for deepwater exploration and production. In partnership with the U.S. Department of Energy and with scientific assistance from the U.S. Geological Survey and academic partners, the JIP has focused on studies to assess hazards associated with drilling the fine-grained, hydrate-bearing sediments that dominate much of the shallow subseafloor in the deepwater (>500 m) Gulf of Mexico. In preparation for an initial drilling, logging, and coring program, the JIP sponsored a multi-year research effort that included: (a) the development of borehole stability models for hydrate-bearing sediments; (b) exhaustive laboratory measurements of the physical properties of hydrate-bearing sediments; (c) refinement of new techniques for processing industry-standard 3-D seismic data to constrain gas hydrate saturations; and (d) construction of instrumentation to measure the physical properties of sediment cores that had never been removed from in situ hydrostatic pressure conditions. Following review of potential drilling sites, the JIP launched a 35-day expedition in Spring 2005 to acquire well logs and sediment cores at sites in Atwater Valley lease blocks 13/14 and Keathley Canyon lease block 151 in the northern Gulf of Mexico minibasin province. The Keathley Canyon site has a bottom simulating reflection at ???392 m below the seafloor, while the Atwater Valley location is characterized by seafloor mounds with an underlying upwarped seismic reflection consistent with upward fluid migration and possible shoaling of the base of the gas hydrate stability (BGHS). No gas hydrate was recovered at the drill sites, but logging data, and to some extent cores, suggest the occurrence of gas hydrate in inferred coarser-grained beds and fractures, particularly between 220 and 330 m below the seafloor

A clamping force measurement system for monitoring the condition of bolted joints on railway track joints and points

NASA Astrophysics Data System (ADS)

Tesfa, B.; Horler, G.; Thobiani, F. Al; Gu, F.; Ball, A. D.

2012-05-01

Many industrial structures associated with railway infrastructures rely on a large number of bolted joint connections to ensure safe and reliable operation of the track and trackside furniture. Significant sums of money are spent annually to repair the damage caused by bolt failures and to maintain the integrity of bolted structures. In the UK, Network Rail (the organization responsible for rail network maintenance and safety) conducts corrective and preventive maintenance manually on 26,000 sets of points (each having approximately 30 bolted joints per set), in order to ensure operational success and safety for the travelling public. Such manual maintenance is costly, disruptive, unreliable and prone to human error. The aim of this work is to provide a means of automatically measuring the clamping force of each individual bolted joint, by means of an instrumented washer. This paper describes the development of a sensor means to be used in the washer, which satisfies the following criteria. Sense changes in the clamping force of the joint and report this fact. Provide compatibility with the large dynamic range of clamping force. Satisfy the limitations in terms of physical size. Provide the means to electronically interface with the washer. Provide a means of powering the washer in situ. Provide a solution at an acceptable cost. Specifically the paper focuses on requirements 1, 2 and 3 and presents the results that support further development of the proposed design and the realization of a pre-prototype system. In the paper, various options for the force sensing element (strain gage, capacitor, piezo-resistive) have been compared, using design optimization techniques. As a result of the evaluation, piezo-resistive sensors in concert with a proprietary force attenuation method, have been found to offer the best performance and cost trade-off The performance of the novel clamping force sensor has been evaluated experimentally and the results show that a smart washer

The Analysis of Adhesively Bonded Advanced Composite Joints Using Joint Finite Elements

NASA Technical Reports Server (NTRS)

Stapleton, Scott E.; Waas, Anthony M.

2012-01-01

The design and sizing of adhesively bonded joints has always been a major bottleneck in the design of composite vehicles. Dense finite element (FE) meshes are required to capture the full behavior of a joint numerically, but these dense meshes are impractical in vehicle-scale models where a course mesh is more desirable to make quick assessments and comparisons of different joint geometries. Analytical models are often helpful in sizing, but difficulties arise in coupling these models with full-vehicle FE models. Therefore, a joint FE was created which can be used within structural FE models to make quick assessments of bonded composite joints. The shape functions of the joint FE were found by solving the governing equations for a structural model for a joint. By analytically determining the shape functions of the joint FE, the complex joint behavior can be captured with very few elements. This joint FE was modified and used to consider adhesives with functionally graded material properties to reduce the peel stress concentrations located near adherend discontinuities. Several practical concerns impede the actual use of such adhesives. These include increased manufacturing complications, alterations to the grading due to adhesive flow during manufacturing, and whether changing the loading conditions significantly impact the effectiveness of the grading. An analytical study is conducted to address these three concerns. Furthermore, proof-of-concept testing is conducted to show the potential advantages of functionally graded adhesives. In this study, grading is achieved by strategically placing glass beads within the adhesive layer at different densities along the joint. Furthermore, the capability to model non-linear adhesive constitutive behavior with large rotations was developed, and progressive failure of the adhesive was modeled by re-meshing the joint as the adhesive fails. Results predicted using the joint FE was compared with experimental results for various

Spacesuit mobility knee joints

NASA Technical Reports Server (NTRS)

Vykukal, H. C. (Inventor)

1979-01-01

Pressure suit mobility joints are for use in interconnecting adjacent segments of an hermetically sealed spacesuit in which low torques, low leakage and a high degree of reliability are required. Each of the joints is a special purpose joint characterized by substantially constant volume and low torque characteristics and includes linkages which restrain the joint from longitudinal distension and includes a flexible, substantially impermeable diaphragm of tubular configuration spanning the distance between pivotally supported annuli. The diaphragms of selected joints include rolling convolutions for balancing the joints, while various joints include wedge-shaped sections which enhance the range of motion for the joints.

Is innovative workforce planning software the solution to NHS staffing and cost crisis? An exploration of the locum industry.

PubMed

Theodoulou, Iakovos; Reddy, Akshaya Mohan; Wong, Jeremy

2018-03-20

Workforce planning in the British healthcare system (NHS) is associated with significant costs of agency staff employment. The introduction of a novel software (ABG) as a 'people to people economy' (P2PE) platform for temporary staff recruitment offers a potential solution to this problem. Consequently, the focus of this study was twofold - primarily to explore the locum doctor landscape, and secondarily to evaluate the implementation of P2PE in the healthcare industry. Documentary analysis was conducted alongside thirteen semi structured interviews across five informant groups: two industry experts, two healthcare consultants, an executive director, two speciality managers and six doctors. We found that locum doctors are indispensable to covering workforce shortages, yet existing planning and recruitment practices were found to be inefficient, inconsistent and lacking transparency. Contrarily, mobile-first solutions such as ABG seem to secure higher convenience, better transparency, cost and time efficiency. We also identified factors facilitating the successful diffusion of ABG; these were in line with classically cited characteristics of innovation such as trialability, observability, and scope for local reinvention. Drawing upon the concept of value-based healthcare coupled with the analysis of our findings led to the development of Information Exchange System (IES) model, a comprehensive framework allowing a thorough comparison of recruitment practices in healthcare. IES was used to evaluate ABG and its diffusion against other recruitment methods and ABG was found to outperform its alternatives, thus suggesting its potential to solve the staffing and cost crisis at the chosen hospital.

[Research on contribution decomposition by industry to China's carbon intensity reduction and carbon emission growth].

PubMed

Jiang, Jing-Jing; Ye, Bin; Ji, Jun-Ping; Ma, Xiao-Ming

2014-11-01

The binding carbon intensity index and the pilot "cap-and-trade" emission trading scheme are two important approaches currently applied by China to mitigate its greenhouse gases emissions. It is of great significance to research the influence mechanism of related factors by industry on the dynamics of national carbon intensity and emission, not only for setting industry-specified intensity reduction target but also for setting industry coverage of the ETS. Two LMDI models were applied in this paper to decompose industry contributions to the changes of China's carbon intensity and carbon emission during the period of 1996-2010. Empirical results showed that: The decline of national carbon intensity was jointly determined by the changes of carbon intensities and the added value proportions of all industries, and the impact of industry carbon intensities was larger. The increase of national carbon emission was jointly determined by the changes of carbon intensities and the added value of all industries. The former had inhibitory effect whist the latter had decisive promoting effect. The five industries making the largest contribution to the changes of national carbon emission and carbon intensity included industries of electricity, nonmetal mineral, ferrous metal, transportation service, chemical materials, which were followed by the industries of agriculture, coal mining and processing, petroleum and natural gas extraction. Petroleum refining and coking industry and construction industry made small contribution to the decline of national carbon intensity, but made large contribution to the growth of national carbon emission. The contributions of service industries to national carbon emission growth showed a rising trend, especially those of transportation service industry, wholesaling, retailing and catering service industry.

Competition in health care: strategies from other industries.

PubMed

Himmelsbach, W A

1984-11-01

Health care managers can learn to adjust to competition by observing companies in other deregulated industries. Six basic strategies will separate the winners from the losers: Increase market share. This strategy requires not only increasing the share of current markets but also introducing new products and services into new markets. Scrutinize operations. Managers must be knowledgeable about strategic planning, adept at product line analysis, and skillful in using management information systems. Prune where necessary. Operations must be periodically reviewed to assess whether programs, products, and services continue to be profitable. Increase productivity. Productivity in this labor-intensive industry is essential. Wages may have to be reduced and staffing levels changed in the future to permit better control of labor costs. Increasing the volume of service, investing in nonclinical technology, and encouraging employee ideas also should be considered in seeking higher productivity. Strengthen the balance sheet. Hospitals should avoid incurring both long- and short-term debt, and they should attempt to accelerate repayment of long-term debt. Not-for-profit hospitals should investigate joint ventures, which spread the financial risk among investors, as means to raise capital to expand their operations. Increase cash. Prudent organizations will establish reserve funds, adopt fund-raising programs, and initiate improved cash collection systems. Health care executives also should reflect on how deregulation may affect their employees, the poor, and access to sophisticated medical procedures. The successful health care organization eventually will position itself in line not only with its markets but also with its mission and values.

40 CFR 62.3300 - Identification of plan.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Mist Emissions from Existing Sulfuric Acid Production Plants § 62.3300 Identification of plan. (a... Sulfuric Acid Plants.” (b) The plan was officially submitted on August 10, 1978. (c) Identification of sources: The plan includes the following sulfuric acid production plants: (1) Beker Industries in LaSalle...

40 CFR 62.3300 - Identification of plan.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Mist Emissions from Existing Sulfuric Acid Production Plants § 62.3300 Identification of plan. (a... Sulfuric Acid Plants.” (b) The plan was officially submitted on August 10, 1978. (c) Identification of sources: The plan includes the following sulfuric acid production plants: (1) Beker Industries in LaSalle...

40 CFR 62.3300 - Identification of plan.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Mist Emissions from Existing Sulfuric Acid Production Plants § 62.3300 Identification of plan. (a... Sulfuric Acid Plants.” (b) The plan was officially submitted on August 10, 1978. (c) Identification of sources: The plan includes the following sulfuric acid production plants: (1) Beker Industries in LaSalle...

40 CFR 62.3300 - Identification of plan.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Mist Emissions from Existing Sulfuric Acid Production Plants § 62.3300 Identification of plan. (a... Sulfuric Acid Plants.” (b) The plan was officially submitted on August 10, 1978. (c) Identification of sources: The plan includes the following sulfuric acid production plants: (1) Beker Industries in LaSalle...

40 CFR 62.3300 - Identification of plan.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Mist Emissions from Existing Sulfuric Acid Production Plants § 62.3300 Identification of plan. (a... Sulfuric Acid Plants.” (b) The plan was officially submitted on August 10, 1978. (c) Identification of sources: The plan includes the following sulfuric acid production plants: (1) Beker Industries in LaSalle...

A Suggested Planned Course in Industrial Arts; Grades 7 and 8. Reprint.

ERIC Educational Resources Information Center

Pennsylvania State Dept. of Education, Harrisburg. Bureau of Curriculum Services.

The Pennsylvania industrial arts curriculum guide for grades 7 and 8 reflects changing philosophy and practices in industrial arts education as well as incorporating the effect of technological changes. Objectives unique to industrial arts education are: (1) to develop literacy in a technological civilization, (2) to develop an insight and…

75 FR 66780 - Suisun Marsh Habitat Management, Preservation, and Restoration Plan, California

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-29

... joint lead agencies, and the State of California Department of Fish and Game (DFG), acting as the... comprehensive 30-year plan designed to address various conflicts regarding use of resources within approximately... comprehensive plan designed to address the various conflicts regarding use of Marsh resources, with the focus on...

The SENNAPE Project: An University-Industry Joint Program in Information Technology.

ERIC Educational Resources Information Center

Seixas, J. M.; Maidantchik, C.; Caloba, L. P.

The SENNAPE (Software Engineering and Neural Networks Applied to Physics and Electricity) project has been putting together the European and the Brazilian industries towards neural processing developments in the fields of high-energy physics and electricity. It is a multi-disciplinary international collaboration with the participation of different…

A guide to organizing joint ventures with physicians.

PubMed

Peters, G R

1986-12-01

Catholic health care facilities must consider the business and legal risks, canon law, and other constraints when planning a joint venture with physicians. Participants should first establish goals and compatibility, then determine the venture's type (property, service), form ("true," lease, contract), and structure (corporation, partnership, joint property ownership, trust). The administrator must decide whether the facility will participate directly in the venture or form a separate organization. Participants must determine their relationships with the venture, choosing among many options. The administrator should consider whether a venture raises any canon law issues, especially regarding ecclesiastical and secular assets, approval by the local bishop or Holy See, and need for consultation. Other pertinent legal issues include: Fraud and abuse. The venture should not appear as compensation to induce referrals. Physician referrals. Many states prohibit or restrict referrals by physician participants. Antitrust law. Participants may be liable for actions constituting on antitrust violation. Securities low. Organizers must clarify Securities and Exchange Commission registration exemptions and observe state "blue sky" laws. Tax issues. Catholic health care facilities must consider such factors as tax-exempt status, unrelated business income, taxable subsidiaries, and public charity status. Other considerations include tax ramifications for physicians; tax shelter registration; certificate of need (CON), licensing, and building standards; effects on reimbursement and pension plans; organizational and bond documents; corporate medical practice and fee-splitting questions; and labor and contractual issues.

25. 'HANGAR SHEDS TRUSSES DETAILS; ARCHITECTURAL PLANS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

25. 'HANGAR SHEDS - TRUSSES - DETAILS; ARCHITECTURAL PLANS - PLANT AREA; MODIFICATION CENTER NO. 1, DAGGETT, CALIFORNIA.' Sections and details of trusses, ironwork, and joints, as modified to show ridge joint detail. As built. This blueline also shows the fire suppression system, added in orange pencil for 'Project 13: Bldgs. T-30, T-50, T-70, T-90' at a later, unspecified date. Contract no. W509 Eng. 2743; File no. 555/84, revision B, dated August 24, 1942. No sheet number. - Barstow-Daggett Airport, Hangar Shed No. 4, 39500 National Trails Highway, Daggett, San Bernardino County, CA

INDUSTRIAL RADIOGRAPHY COURSE, INSTRUCTOR'S GUIDE, VOLUME 1.

ERIC Educational Resources Information Center

Texas A and M Univ., College Station. Engineering Extension Service.

THE PURPOSE OF THE GUIDE IS TO GIVE MAXIMUM ASSISTANCE TO INSTRUCTORS IN PLANNING THE TRAINING OF LICENSED INDUSTRIAL RADIOGRAPHERS. IT WAS DEVELOPED BY THE ENGINEERING EXTENSION SERVICE, TEXAS AGRICULTURAL AND MECHANICAL UNIVERSITY, COLLEGE STATION, TEXAS. THE 21 UNITS INCLUDE (1) INDUSTRIAL APPLICATIONS, (2) NONDESTRUCTIVE TESTING METHODS, (3)…

[Communique on fulfillment of 1979 economic plan].

PubMed

1980-04-30

In 1979 China's total industrial and agricultural output value reached 617,500 million yuan, exceeding the economic plan by 1.5%. National income was 337,000 million yuan, which was 7% over 1978. This progress was achieved under the leadership of the Communist Party of China and the people's government through conscientious implementation of the policy of readjustment, restructuring, consolidation, and improvement in the national economy. Discussion of the 1979 economic plan focuses on the following: industry; agriculture; capital construction; transport and post and telecommunications; domestic trade; foreign trade and tourism; science and technology and education and culture; health work and sports; the people's livelihood; and the population. The total 1979 industrial output value was 459,100 million yuan, 0.6% above the plan and 8.5% over 1978. The rate of increase of light industry exceeded that of heavy industry. Plans were met or surpassed for the output of 89 of 100 major products. The total value of agricultural output for 1979 was 158,400 million yuan, 4.2% above the plan and 8.6% higher than the previous year. The fixed assets turned over for use by capital construction units all over China came to 41,800 million yuan, a 17.4% increase over 1978. In 1979 the volume of railway freight transport was 558,800 million ton-kilometers, a 4.8% increase over 1978. The value of commodities purchased by commercial departments totaled 199,240 million yuan, topping 1978 by 14.5%. China had a population of 970.92 million by the end of 1979, 12.83 million people more than the 1978 figure. The birth rate was 17.9/1000 and the death rate was 6.2/1000. China's natural population growth rate was 11.7/1000.

Ocean research plan reviewed

NASA Astrophysics Data System (ADS)

Zielinski, Sarah

A draft plan setting out priorities for U.S. ocean research generally was lauded for its clear and well-articulated view in a recent report from a committee of the U.S. National Research Council (NRC) of the US. National Academies. However, the committee advised that the plan would benefit from a bold vision for the future of ocean science research, additional details, and a reorganization to include cross-cutting research.The draft "Charting the Course for Ocean Science in the United States: Research Priorities for the Next Decade" was made available for public comment in September 2006 by the U.S. National Science and Technology Council's Joint Subcommittee on Ocean Science and Technology.

Adapting The Joint Commission's Seven Foundations of Safe and Effective Transitions of Care to Home

PubMed Central

Labson, Margherita C.

2015-01-01

The purpose of this article is to describe The Joint Commission's 7 foundations of safe and effective transitions of care to home: (a) leadership support; (b) multidisciplinary collaboration; (c) early identification of patients/clients at risk; (d) transitional planning; (e) medication management; (f) patient and family action/engagement; and (g) transfer of information. These foundations were identified by The Joint Commission after a review of published research; focus groups with healthcare professionals involved in transitions of care; and visits to diverse healthcare organizations. The author, who is the executive director of The Joint Commission's Home Care Accreditation Program, illustrates how healthcare organizations are adapting the 7 foundations of safe and effective transitions of care to home. PMID:25742092

Planning high security/high profile events.

PubMed

McCafferty, Mike

2013-01-01

The author who has lead in the planning and implementation of some of the most notorious trials and events, both in Canada and internationally, describes how such these experiences could be applied to focused high security planning in the health care industry.